OD in Schools: The State of the Art. Vol. II: Review of Research on OD. Final Report.

Science.gov (United States)

Fullan, Michael; And Others

The purpose of this document, the second of a five-volume series, was to analyze the various reviews of organizational development (OD) in general, and case studies of school districts in particular, in order to synthesize information about OD as it applies to schools. The review is organized into four main categories: (1) values, themes, and…

The dynamics of the reaction of 16O(1D)+D218O→16OD+18OD

International Nuclear Information System (INIS)

Guillory, W.A.; Gericke, K.H.; Comes, F.J.

1983-01-01

The detailed energy partitioning in the reaction of a metastable oxygen atom O( 1 D) with D 2 O proceeding to two OD molecules has been studied. In order to distinguish the product state distribution between the two chemically identical product molecules OD, the oxygen atom in the heavy water molecule was labeled isotopically. The use of spectroscopic methods allows a complete analysis of the products' state distribution including such fine details as the distribution of the different #betta# components and of the electron spin. The vibrational energy is almost exclusively channeled into the new ( 16 OD) bond, whereas the original ( 18 OD) bond is produced (>90%) in the ground vibrational state. Both OD radicals show a broad rotational excitation and the rotational energy is equally partitioned among the two bonds. The energy distribution over the rovibrational levels strongly reflects the influence of coincident product molecules emerging from this chemical reaction. The reaction is very direct and must proceed on a time scale which does not allow for efficient energy transfer into all the available phase space

Pressure dependence of hydrogen bonding in metal deuteroxides: a neutron powder diffraction study of Mn(OD)2 and β-Co(OD)2

International Nuclear Information System (INIS)

Parise, J.B.; Theroux, B.; Li, R.; Loveday, J.S.; Marshall, W.G.; Klotz, S.

1998-01-01

The structures of deuterated pyrochroite, Mn(OD) 2 and β-Co(OD) 2 have been refined using the Rietveld method and neutron powder diffraction data collected in an opposed-anvil high pressure (Paris-Edinburgh) cell from room pressure to 9 GPa. The equation of state for Mn(OD) 2 was determined (K=41(3) GPa for fixed K'=4.7) and found to be consistent with previous studies of the isostructural brucite, Mg(OD) 2 . The compressibility of β-Co(OD) 2 on the other hand is apparently anomalous. The c-axis initially decreases at 3 times the rate of decrease of the a-axis; the ratio decreases to about 1.5 at an estimated 6 GPa before increasing again beyond this pressure. There is no obvious corresponding anomaly in the details of the atomic structure. In both materials there is an increase in the D-site disorder with pressure. A split-site model for the D-positions best fits the data at pressures above 8 GPa. There is no statistically significant increase in the O-D interatomic distance at increased pressure while the hydrogen bonding interaction D..O appears to increase as this distance decreases and the O-D..O angle increases. The intramolecular O-D bond valences, determined indirectly from the intermolecular D..O distances, decrease steadily for both materials as pressure is increased. (orig.)

Symptomatic overlap between attention-deficit/hyperactivity disorder and borderline personality disorder in women: the role of temperament and character traits.

NARCIS (Netherlands)

Dijk, F.E. van; Lappenschaar, M.; Kan, C.C.; Verkes, R.J.; Buitelaar, J.K.

2012-01-01

OBJECTIVE: There is substantial symptomatic overlap between attention-deficit/hyperactivity disorder (ADHD) and borderline personality disorder (BPD) in adults, but the nature of the relationship between these disorders needs further clarification. The role of temperament and character traits in the

Zaburzenia odżywiania – problem wciąż aktualny = Eating disorders – an ongoing problem

OpenAIRE

Rzońca, Ewa; Bień, Agnieszka; Iwanowicz-Palus, Grażyna

2016-01-01

Rzońca Ewa, Bień Agnieszka, Iwanowicz-Palus Grażyna. Zaburzenia odżywiania – problem wciąż aktualny = Eating disorders – an ongoing problem. Journal of Education, Health and Sport. 2016;6(12):267-273. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.198734 http://ojs.ukw.edu.pl/index.php/johs/article/view/4053 The journal has had 7 points in Ministry of Science and Higher Education parametric evaluation. Part B item 755 (23.12.2015). 755 Journal of Edu...

Zaburzenia odżywiania – problem wciąż aktualny = Eating disorders – an ongoing problem

OpenAIRE

Ewa Rzońca; Agnieszka Bień; Grażyna Iwanowicz-Palus

2016-01-01

Rzońca Ewa, Bień Agnieszka, Iwanowicz-Palus Grażyna. Zaburzenia odżywiania – problem wciąż aktualny = Eating disorders – an ongoing problem. Journal of Education, Health and Sport. 2016;6(12):267-273. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.198734 http://ojs.ukw.edu.pl/index.php/johs/article/view/4053         The journal has had 7 points in Ministry of Science and Higher Education parametric evaluation. Part B item 755 (23.12.2015). 755 Journal of Educa...

The Analysis Of Personality Disorder On Two Characters In The Animation Series Black Rock Shooter

OpenAIRE

Ramadhana, Rizki Andrian

2015-01-01

The title of this thesis is The Analysis of Personality Disorder on Two Characters in the Animation Series “Black Rock Shooter” which discusses about the personality disorder of two characters from this series; they are Kagari Izuriha and Yomi Takanashi. The animation series Black Rock Shooter is chosen as the source of data because this animation has psychological genre and represents the complexity of human relationship, especially when build up a friendship. It is because human is a social...

ODS alloys for structures subjected to irradiation

International Nuclear Information System (INIS)

Carlan, Y. de

2010-01-01

ODS (oxide-dispersion-strengthened) materials are considered for cladding purposes for the fourth-generation sodium-cooled fast reactors. ODS materials afford many benefits. Indeed, these high-performance materials combine, at the same time, remarkable mechanical strength, in hot conditions, and outstanding irradiation behavior. New ODS steel grades, exhibiting better performance levels than the last-generation austenitic steels, afford not only negligible swelling under irradiation, owing to their 'ferritic' body-centered cubic structure - by contrast to austenitic grades, which feature a face-centered cubic structure - but equally outstanding creep properties, owing to the nano-reinforcements present in the matrix. ODS materials are obtained by powder metallurgy, the first fabrication step involves co-grinding a metal powder together with yttrium oxide (Y 2 O 3 ) powder. At this stage, an iron oxide may also be added, or an yttrium-rich intermetallic compound in order to provide the amounts of yttrium, and oxygen required for the formation of nano-oxides. The metal powder consists of a powder pre-alloyed to the chemical composition of the desired material. Once the powder has been obtained, consolidation of the ODS materials is achieved either by hot extrusion, or by hot isostatic pressing. (A.C.)

Simulation of the BGO-OD experiment at ELSA

Energy Technology Data Exchange (ETDEWEB)

Johnstone, Russell [University of Bonn, Physikalisches Institut, Bonn (Germany); Collaboration: BGO-OD-Collaboration

2011-07-01

The goal of the BGO Open-Dipole (BGO-OD) project is the systematic investigation of the photoproduction of mesons off the nucleon. These processes are related to the structure of both the mesons and the baryons involved in reactions typical of low-energy hadronic physics. In order to fully understand and accurately interpret the results of the BGO-OD experiment it will be necessary to have a full detector and reaction simulation so that effects from detector resolution and acceptance can be accounted for in the final results. The simulation of the BGO-OD will be be undertaken with the Explora Virtual Monte-Carlo (VMC) software framework. This allows for one common user code to be implemented under Geant4, Geant3 and Fluka. The simulation software is also an analysis tool and such flexibility will be key to an efficient final analysis of the data from the BGO-OD experiment. Presented here are current status of the simulation software for the BGO-OD project and the relevant geometry of the BGO-OD, including the central BGO rugby ball detector with the dual-layer Multiwire Proportional Chambers (MWPCs) and the forward spectrometer, consisting of a large dipole magnet, tracking detectors and the Time-of-Flight walls. Simulation of the magnetic field will also be covered.

TEM characterization of simultaneous triple ion implanted ODS Fe12Cr

International Nuclear Information System (INIS)

Castro, Vanessa de; Briceno, Martha; Lozano-Perez, Sergio; Trocellier, Patrick; Roberts, Steve G.; Pareja, Ramiro

2014-01-01

Understanding the behavior of oxide dispersion strengthened (ODS) ferritic/martensitic steels under irradiation is vital in the design of advanced fusion reactors. In this work, a simultaneous triple ion implanted ODS Fe12Cr steel was investigated by transmission electron microscopy in order to determine the effect of irradiation on the grain and dislocation structures, oxide nanoparticles and other secondary phases present in the steel. The ODS steel was irradiated at RT with Fe 8+ , He + and H + at the JANNUS-Saclay facility to a damage of 4.4 dpa. Results show that ODS nanoparticles appear very stable under these irradiation conditions

The comparison of temperament and character between patients with internet gaming disorder and those with alcohol dependence.

Science.gov (United States)

Lee, Young Sik; Son, Ji Hyun; Park, Jeong Ha; Kim, Sun Mi; Kee, Baik Seok; Han, Doug Hyun

2017-06-01

The differences in prevalence, natural history, and disease progression between Internet gaming disorder (IGD) and substance use disorder contribute to the controversy over IGD as a diagnosis under substance-related and addictive disorders. The purpose of the current study was to assess the temperament and character of subjects with IGD in comparison with those with alcohol dependence (AD). Temperament and character were assessed using Cloningernt temperament and character inventory (TCI). The severity of IGD or AD, depressed mood, anxiety, attention and impulsiveness were assessed using each of the six scales. Among patients with AD, after controlling for other variables, the severity of AD was positively correlated with harm avoidance (HA) score and depressed mood. Among patients with IGD, after controlling for other variables, the severity of IGD was positively correlated with novelty seeking (NS) score, impulsiveness and attention. There were significant differences in temperament and character between the IGD and AD groups as measured using the TCI. These results suggest that IGD and AD need to be categorized separately in a diagnostic classification system and benefit from different treatment approaches.

Comparing Profile of Temperament and Character Dimensions in Patients with Major Depressive Disorder and Bipolar Mood Disorder and Control Group in the Iranian Sample

Directory of Open Access Journals (Sweden)

shahram hajirezaei

2017-06-01

Full Text Available Objective: This study was conducted to compare the profile of Temperament and Character dimensions in patients with major depressive disorder and bipolar mood disorder and control group.Methods: In this causal-comparative study the population consisted of two clinical groups (major depressive disorder and bipolar mood disorder and a non-clinical group. The sample was 193 subjects (77 patients with major depressive disorder, 86 patients with bipolar mood disorder, and 30 normal people with an age range of 18-65 years and the mean age of 40.1. They were selected from Roozbeh psychiatric hospital using available sampling method. Tools used in this research included Temperament and Character Inventory-140 and General Health Questionnaire-28. Collected data were analyzed by statistical methods of independent t-test and one-way analysis of variance using Statistical Package for the Social Sciences-22 software.Result: The results of comparing the groups showed that there was a significant difference among groups in dimensions of Novelty Seeking, Harm Avoidance, Persistence, Self-Directedness and Cooperativeness (P <0.05. The results showed that only in the Novelty Seeking dimension, the mean was different in males and females (P <0.05.Conclusion: In general, our results showed that patients with major depressive disorder and bipolar mood disorder have different personality profile in some dimensions of Temperament and Character compared with control group.

TEM characterization of simultaneous triple ion implanted ODS Fe12Cr

Energy Technology Data Exchange (ETDEWEB)

Castro, Vanessa de, E-mail: vanessa.decastro@uc3m.es [Departamento de Física, Universidad Carlos III de Madrid, Avda. de la Universidad 30, 28911 Leganés, Madrid (Spain); Briceno, Martha [Department of Materials, University of Oxford, Oxford OX1 3PH (United Kingdom); Johnson Matthey Technology Centre, Blount’s Court Rd, Sonning Common RG4 9NH (United Kingdom); Lozano-Perez, Sergio [Department of Materials, University of Oxford, Oxford OX1 3PH (United Kingdom); Trocellier, Patrick [CEA, DEN, Service de Recherches de Métallurgie Physique, Laboratoire JANNUS, F-91191 Gif-sur-Yvette (France); Roberts, Steve G. [Department of Materials, University of Oxford, Oxford OX1 3PH (United Kingdom); Pareja, Ramiro [Departamento de Física, Universidad Carlos III de Madrid, Avda. de la Universidad 30, 28911 Leganés, Madrid (Spain)

2014-12-15

Understanding the behavior of oxide dispersion strengthened (ODS) ferritic/martensitic steels under irradiation is vital in the design of advanced fusion reactors. In this work, a simultaneous triple ion implanted ODS Fe12Cr steel was investigated by transmission electron microscopy in order to determine the effect of irradiation on the grain and dislocation structures, oxide nanoparticles and other secondary phases present in the steel. The ODS steel was irradiated at RT with Fe{sup 8+}, He{sup +} and H{sup +} at the JANNUS-Saclay facility to a damage of 4.4 dpa. Results show that ODS nanoparticles appear very stable under these irradiation conditions.

ODS iron aluminides

Energy Technology Data Exchange (ETDEWEB)

Wright, I.G.; Pint, B.A.; Ohriner, E.K.; Tortorelli, P.F. [Oak Ridge National Lab., TN (United States)

1996-08-01

The overall goal of this program is to develop an oxide dispersion-strengthened (ODS) version of Fe{sub 3}Al that has sufficient creep strength and resistance to oxidation at temperatures in the range 1000 to 1200{degrees}C to be suitable for application as heat exchanger tubing in advanced power generation cycles. The program has two main thrusts: (a) alloy processing, which involves mechanical alloying and thermomechanical processing to achieve the desired size and distribution of the oxide dispersoid, and (b) optimization of the oxidation behavior to provide increased service life compared to ODS-FeCrAl alloys intended for the same applications. Control of the grain size and shape in the final alloy is very dependent on the homogeneity of the alloy powder, in terms of the size and distribution of the dispersed oxide particles, and on the level of strain and temperature applied in the recrystallization step. Studies of the effects of these variables are being made using mechanically-alloyed powder from two sources: a commercial powder metallurgy alloy vendor and an in-house, controlled environment high-energy mill. The effects of milling parameters on the microstructure and composition of the powder and consolidated alloy are described. Comparison of the oxidation kinetics of ODS-Fe{sub 3}Al alloys with commercial ODS-FeCrAl alloys in air at 1000-1300{degrees}C indicated that the best Fe{sub 3}Al-based alloys oxidized isothermally at the same rate as the ODS-FeCrAl alloys but, under thermal cycling conditions, the oxidation rate of ODS-Fe{sub 3}Al was faster. The main difference was that the ODS-Fe{sub 3}Al experienced significantly more scale spallation above 1000{degrees}C. The differences in oxidation behavior were translated into expected lifetimes which indicated that, for an alloy section thickness of 2.5 mm, the scale spallation of ODS-Fe{sub 3}Al leads to an expected service lifetime similar to that for the INCO alloy MA956 at 1100 to 1300{degrees}C.

Development of high performance ODS alloys

Energy Technology Data Exchange (ETDEWEB)

Shao, Lin [Texas A & M Univ., College Station, TX (United States); Gao, Fei [Univ. of Michigan, Ann Arbor, MI (United States); Garner, Frank [Texas A & M Univ., College Station, TX (United States)

2018-01-29

This project aims to capitalize on insights developed from recent high-dose self-ion irradiation experiments in order to develop and test the next generation of optimized ODS alloys needed to meet the nuclear community's need for high strength, radiation-tolerant cladding and core components, especially with enhanced resistance to void swelling. Two of these insights are that ferrite grains swell earlier than tempered martensite grains, and oxide dispersions currently produced only in ferrite grains require a high level of uniformity and stability to be successful. An additional insight is that ODS particle stability is dependent on as-yet unidentified compositional combinations of dispersoid and alloy matrix, such as dispersoids are stable in MA957 to doses greater than 200 dpa but dissolve in MA956 at doses less than 200 dpa. These findings focus attention on candidate next-generation alloys which address these concerns. Collaboration with two Japanese groups provides this project with two sets of first-round candidate alloys that have already undergone extensive development and testing for unirradiated properties, but have not yet been evaluated for their irradiation performance. The first set of candidate alloys are dual phase (ferrite + martensite) ODS alloys with oxide particles uniformly distributed in both ferrite and martensite phases. The second set of candidate alloys are ODS alloys containing non-standard dispersoid compositions with controllable oxide particle sizes, phases and interfaces.

The crystal structure of gustavite, PbAgBi3S6. Analysis of twinning and polytypism using the OD approach

DEFF Research Database (Denmark)

Makovicky, Emil; Topa, Dan

2011-01-01

) of the opposite species; the latter is explained by a presence of twin lamellae or antiphase domains in the crystal. In accordance with its frequently observed twinning, gustavite is an OD (order-disorder) structure that can be described by zig-zag unit layers with layer symmetry P(2/n) 21/c 2/m...... and the interlayer symmetry elements {(22/n1,1/2) 21/n1/2,2 21/2/ a2}. An alternative OD description uses planar unit layers with the layer symmetry P(2/ b) 21/c 21/m and the interlayer elements 22/n1,–1/2 21/n1/2,2 21/2/a2. The former description adheres closely to the details of coordination of bismuth observed...

Assessment of Personality Dimensions in Children and Adolescents with Bipolar Disorder Using the Junior Temperament and Character Inventory

Science.gov (United States)

Fonseca, Manoela; Caetano, Sheila C.; Hatch, John P.; Hunter, Kristina; Nicoletti, Mark; Pliszka, Steven R.; Cloninger, C. Robert; Soares, Jair C.

2009-01-01

Abstract Objective We compared temperament and character traits in children and adolescents with bipolar disorder (BP) and healthy control (HC) subjects. Method Sixty nine subjects (38 BP and 31 HC), 8–17 years old, were assessed with the Kiddie Schedule for Affective Disorders and Schizophrenia–Present and Lifetime. Temperament and character traits were measured with parent and child versions of the Junior Temperament and Character Inventory. Results BP subjects scored higher on novelty seeking, harm avoidance, and fantasy subscales, and lower on reward dependence, persistence, self-directedness, and cooperativeness compared to HC (all p adolescents. Higher parent-rated novelty seeking, lower self-directedness, and lower cooperativeness were associated with co-morbid attention-deficit/hyperactivity disorder (ADHD). Lower parent-rated reward dependence was associated with co-morbid conduct disorder, and higher child-rated persistence was associated with co-morbid anxiety. Conclusions These findings support previous reports of differences in temperament in BP children and adolescents and may assist in a greater understating of BP children and adolescents beyond mood symptomatology. PMID:19232019

Self-mutilation and suicide attempts: relationships to bipolar disorder, borderline personality disorder, temperament and character.

Science.gov (United States)

Joyce, Peter R; Light, Katrina J; Rowe, Sarah L; Cloninger, C Robert; Kennedy, Martin A

2010-03-01

Self-mutilation has traditionally been associated with borderline personality disorder, and seldom examined separately from suicide attempts. Clinical experience suggests that self-mutilation is common in bipolar disorder. A family study was conducted on the molecular genetics of depression and personality, in which the proband had been treated for depression. All probands and parents or siblings were interviewed with a structured interview and completed the Temperament and Character Inventory. Fourteen per cent of subjects interviewed reported a history of self-mutilation, mostly by wrist cutting. Self-mutilation was more common in bipolar I disorder subjects then in any other diagnostic groups. In multiple logistic regression self-mutilation was predicted by mood disorder diagnosis and harm avoidance, but not by borderline personality disorder. Furthermore, the relatives of non-bipolar depressed probands with self-mutilation had higher rates of bipolar I or II disorder and higher rates of self-mutilation. Sixteen per cent of subjects reported suicide attempts and these were most common in those with bipolar I disorder and in those with borderline personality disorder. On multiple logistic regression, however, only mood disorder diagnosis and harm avoidance predicted suicide attempts. Suicide attempts, unlike self-mutilation, were not familial. Self-mutilation and suicide attempts are only partially overlapping behaviours, although both are predicted by mood disorder diagnosis and harm avoidance. Self-mutilation has a particularly strong association with bipolar disorder. Clinicians need to think of bipolar disorder, not borderline personality disorder, when assessing an individual who has a history of self-mutilation.

Impact of oppositional defiant disorder dimensions on the temporal ordering of conduct problems and depression across childhood and adolescence in girls.

Science.gov (United States)

Hipwell, Alison E; Stepp, Stephanie; Feng, Xin; Burke, Jeff; Battista, Deena R; Loeber, Rolf; Keenan, Kate

2011-10-01

Little is known about the role of oppositional defiant disorder (ODD) dimensions on the temporal unfolding of conduct disorder (CD) and depression in girls between childhood and adolescence. The year-to-year associations between CD and depressive symptomatology were examined using nine waves of annually collected data (ages 8 through 16 years) from 1215 participants of the Pittsburgh Girls Study. A series of autoregressive path models were tested that included ODD-Emotion Dysregulation (ODD-ED) and ODD-Defiance, as time-varying covariates on CD predicting depression severity in the following year, and vice versa. Conduct problems, depression, and ODD dimensions were relatively stable throughout childhood and adolescence, and a moderate degree of covariance was observed between these variables. Path analyses showed that CD often preceded depression across this developmental period, although the effect sizes were small. There was less consistent prediction from depression to CD. The overlap between ODD-ED and CD partially explained the prospective relations from CD to depression, whereas these paths were fully explained by the overlap between ODD-ED and depression. The overlap between ODD-Defiance and CD did not account for the prospective relations from CD to depression. In contrast, the overlap between ODD-Defiance and depression accounted for virtually all paths from CD to depression. Accounting for the overlap between ODD dimensions and both CD and depression eliminated all significant predictive paths. Symptoms of CD tend to precede depression in girls during childhood and adolescence. However, covariance between depression and both ODD-ED and ODD-Defiance accounts for these prospective relations. ODD dimensions should be assessed when evaluating risk for comorbid depression in girls with conduct problems, and emotion dysregulation and defiance aspects of ODD should be identified as targets for treatment in order to prevent depression in the future. © 2011 The

Selecting Picture Books Featuring Characters with Autism Spectrum Disorder: Recommendations for Teachers

Science.gov (United States)

Gaffney, Meredith; Wilkins, Julia

2016-01-01

We read 48 children's books featuring characters with autism spectrum disorder (ASD) to determine which books would be appropriate for use during read-alouds in early childhood classrooms. We conducted a search on Amazon for children's books on ASD published after 2010 and identified 50 books that met the following criteria: (a) the book was a…

Temperament, character, and suicide attempts in unipolar and bipolar mood disorders.

Science.gov (United States)

Jylhä, Pekka J; Rosenström, Tom; Mantere, Outi; Suominen, Kirsi; Melartin, Tarja K; Vuorilehto, Maria S; Holma, Mikael K; Riihimäki, Kirsi A; Oquendo, Maria A; Keltikangas-Järvinen, Liisa; Isometsä, Erkki T

2016-02-01

Personality features may indicate risk for both mood disorders and suicidal acts. How dimensions of temperament and character predispose to suicide attempts remains unclear. Patients (n = 597) from 3 prospective cohort studies (Vantaa Depression Study [VDS], Jorvi Bipolar Study [JoBS], and Vantaa Primary Care Depression Study [PC-VDS]) were interviewed at baseline, at 18 months, and, in VDS and PC-VDS, at 5 years (1997-2003). Personality was measured with the Temperament and Character Inventory-Revised (TCI-R), and follow-up time spent in major depressive episodes (MDEs) as well as lifetime (total) and prospectively ascertained suicide attempts during the follow-up were documented. Overall, 219 patients had 718 lifetime suicide attempts; 88 patients had 242 suicide attempts during the prospective follow-up. The numbers of both the total and prospective suicide attempts were associated with low self-directedness (β = -0.266, P = .004, and β = -0.294, P suicide attempts were linked to high novelty seeking (β = 0.195, P = .05). Prospective, but not total, suicide attempts were associated with high harm avoidance (β = 0.322, P suicide attempts during MDEs were included. After adjustment was made for total time spent in MDEs, only high persistence predicted suicide attempts (β = 0.190, P suicide attempts indicated significant mediated effect through time at risk in MDEs, but no significant direct effect. Among mood disorder patients, suicide attempt risk is associated with temperament and character dimensions. However, their influence on predisposition to suicide attempts is likely to be mainly indirect, mediated by more time spent in depressive episodes. © Copyright 2016 Physicians Postgraduate Press, Inc.

The role of temperament and character in the outcome of depressive mood in eating disorders.

Science.gov (United States)

Rodríguez-Cano, Teresa; Beato-Fernandez, Luis; Rojo-Moreno, Luis; Vaz-Leal, Francisco J

2014-07-01

The aims were to see which temperament and character dimensions were associated with depression, mainly with its outcome at two-year follow up in eating disorders (EDs). Participants (N=151) were 44 Anorexia nervosa (AN), 55 Bulimia nervosa (BN) and 52 Eating disorders not otherwise specified (EDNOS) patients. The Beck Depression Inventory (BDI), State and Trait Anxiety Inventory (STAI), Rosenberg Self Esteem Questionnaire (RSE), Eating Disorder Inventory (EDI-2) and Temperament and Character Inventory (TCI) were administered. Depression at the beginning (t0) was severe in 22% of the cases. Harm Avoidance and Novelty Seeking had an effect on depressed mood at t0, mediated by Ineffectiveness. Responsibility (SD1) was associated with scores on the BDI at two-year follow up (β=-0.37, 95% CI -2.6, -0.6, p<0.01). The evaluation of personality dimension in EDs has therapeutic and prognostic implications: To enhance self-efficacy and self-directness is crucial for good clinical outcome. Copyright © 2014 Elsevier Inc. All rights reserved.

Insight into the local magnetic environments and deuteron mobility in jarosite (AFe3(SO4)2(OD)6, A = K, Na, D3O) and hydronium alunite ((D3O)Al3(SO4)2(OD,OD2)6), from variable temperature 2H MAS NMR spectroscopy

DEFF Research Database (Denmark)

Nielsen, Ulla Gro; Heinmaa, Ivo; Samoson, Ago

2011-01-01

to the different temperature dependence of their isotropic shifts. An activation energy of 6.3(4) kJ/mol is determined for the D3O+ motion in the isostructural compound D3OAl3(SO4)2(OD)6. Our NMR results support theories that ascribes the spin glass behavior of (H3O)Fe3(SO4)2(OD)6 is to disorder of the D3O+ ion...... and/or a less distorted Fe coordination environment. No sign of proton transfer reactions from the D3O+ ion to the framework is observed....

Order and disorder in matter

CERN Document Server

Careri, Giorgio

1984-01-01

Order and Disorder in Matter offers a comprehensive and up-to-date view of structures and processes in matter, in terms of the evolving concepts of order and disorder. Particular emphasis is given to the recent evolution of these concepts and their relationship to the more complex systems in nature.

Preview Effects of Plausibility and Character Order in Reading Chinese Transposed Words: Evidence from Eye Movements

Science.gov (United States)

Yang, Jinmian

2013-01-01

The current paper examined the role of plausibility information in the parafovea for Chinese readers by using two-character transposed words (in which the order of the component characters is reversed but are still words). In two eye-tracking experiments, readers received a preview of a target word that was (1) identical to the target word, (2) a…

Predictive Capacity of Cloninger's temperament and character inventory (TCI-R) in alcohol use disorder outcomes.

Science.gov (United States)

Ávila Escribano, José Juan; Sánchez Barba, Mercedes; Álvarez Pedrero, Aida; López Villarreal, Ana; Recio Pérez, Joaquina; Rodríguez Rodilla, Manuela; Fraile García, Eulalia

2016-06-14

to investigate the ability to predict the outcome of alcohol use disorders through Cloninger's temperament and character inventory (TCI-R). this is a prospective study consisting of 237 outpatients with alcohol use disorders who underwent follow-up treatment for 6 months and whose personality traits were studied using TCI-R. At the end of that period, the scores of each TCI-R trait were analyzed in terms of those who remained in treatment and those who dropped out. The whole group scored highly in novelty seeking (NS) and harm avoidance (HA) and produced low scores in self-directedness (SD), these last traits are considered prominent. The drop-out group scored significantly (p=.004) higher in novelty seeking (NS) than the follow-up group. Also, when the score was higher than the 67 percentile the likelihood of abandoning the treatment was 1.07 times higher. Cloninger's temperament and character inventory is a good instrument to predict the outcome of treatment of patients with alcohol use disorders and the novelty seeking (NS) dimension is strongly related to therapeutic drop-out.

Rasch-built Overall Disability Scale (R-ODS) for immune-mediated peripheral neuropathies.

Science.gov (United States)

van Nes, S I; Vanhoutte, E K; van Doorn, P A; Hermans, M; Bakkers, M; Kuitwaard, K; Faber, C G; Merkies, I S J

2011-01-25

To develop a patient-based, linearly weighted scale that captures activity and social participation limitations in patients with Guillain-Barré syndrome (GBS), chronic inflammatory demyelinating polyradiculoneuropathy (CIDP), and gammopathy-related polyneuropathy (MGUSP). A preliminary Rasch-built Overall Disability Scale (R-ODS) containing 146 activity and participation items was constructed, based on the WHO International Classification of Functioning, Disability and Health, literature search, and patient interviews. The preliminary R-ODS was assessed twice (interval: 2-4 weeks; test-retest reliability studies) in 294 patients who experienced GBS in the past (n = 174) or currently have stable CIDP (n = 80) or MGUSP (n = 40). Data were analyzed using the Rasch unidimensional measurement model (RUMM2020). The preliminary R-ODS did not meet the Rasch model expectations. Based on disordered thresholds, misfit statistics, item bias, and local dependency, items were systematically removed to improve the model fit, regularly controlling the class intervals and model statistics. Finally, we succeeded in constructing a 24-item scale that fulfilled all Rasch requirements. "Reading a newspaper/book" and "eating" were the 2 easiest items; "standing for hours" and "running" were the most difficult ones. Good validity and reliability were obtained. The R-ODS is a linearly weighted scale that specifically captures activity and social participation limitations in patients with GBS, CIDP, and MGUSP. Compared to the Overall Disability Sum Score, the R-ODS represents a wider range of item difficulties, thereby better targeting patients with different ability levels. If responsive, the R-ODS will be valuable for future clinical trials and follow-up studies in these conditions.

Hydrogen Transport and Trapping in ODS-EUROFER

International Nuclear Information System (INIS)

Esteban, G.A.; Pena, A.; Legarda, F.; Lindau, R.

2006-01-01

Oxide Dispersion Strengthened (ODS) EUROFER is a candidate structural material to be used in the design of several blanket options [R. Lindau et al. Fusion Eng. Des. 75 - 79 (2005) 989]. This type of material allows higher temperature performance (650 o C) than standard RAFM steels and shows improved mechanical properties like superior tensile and creep properties in comparison to the base material EUROFER [R. Lindau, A. Moeslang, M. Schirra, P. Schlossmacher, M. Klimenkov, J. Nucl. Mater. 307-311 (2002) 769]. Together with mechanical and activation properties, the characterization of hydrogen isotope transport properties in any fusion technology material is compulsory because they affect important issues of the blanket concept using a specific collection of materials, such as the fuel economy, plasma stability and the radiological security of the fusion reactor. The hydrogen interaction properties of permeability, diffusivity and Sieverts' constant in ODS-EUROFER are experimentally evaluated by using the gas evolution permeation technique. The results are analysed together with the properties of the base material in order to study the influence of the particular microstructure of ODS in the hydrogen transport. Higher permeability of hydrogen in ODS-EUROFER has been obtained in comparison to the base material EUROFER. The effect of trapping showing a high time lag for non steady-state permeation has been noticed in the low temperature range. The trapping phenomena is identified to be the cause of such effect and the presence of nanoparticles of Yttria the reason for the source of additional trapping sites. The concluding remark is a decrease in the diffusivity and an increase in the solubility of hydrogen in the material at low temperature. All the hydrogen transport parameters obtained for ODS-EUROFER are compared to the properties of base material and available data corresponding to other RAFM steels of the same kind. (author)

A handbook of statistical graphics using SAS ODS

CERN Document Server

Der, Geoff

2014-01-01

An Introduction to Graphics: Good Graphics, Bad Graphics, Catastrophic Graphics and Statistical GraphicsThe Challenger DisasterGraphical DisplaysA Little History and Some Early Graphical DisplaysGraphical DeceptionAn Introduction to ODS GraphicsGenerating ODS GraphsODS DestinationsStatistical Graphics ProceduresODS Graphs from Statistical ProceduresControlling ODS GraphicsControlling Labelling in GraphsODS Graphics EditorGraphs for Displaying the Characteristics of Univariate Data: Horse Racing, Mortality Rates, Forearm Lengths, Survival Times and Geyser EruptionsIntroductionPie Chart, Bar Cha

Order-Disorder Theory

International Nuclear Information System (INIS)

Kasteleyn, P.W.

1971-01-01

Apology. 1. Order-disorder transitions; 2. The Ising model; 3. The classical theories; 4. The exact analysis of the Ising model; 5. Series expansions; 6. Relations between critical indices; 7. Other models; 8. Concluding remarks. (author)

Evaluation of personality dimensions using the Cloninger Temperament and Character Inventory in subjects with borderline personality disorders

Directory of Open Access Journals (Sweden)

Farid Hoseini F

2008-12-01

Full Text Available "nBackground: The Temperament and Character Inventory (TCI efficiently diagnoses personality disorders, differentiating the individual subtypes. This research aimed to evaluate personality dimensions using the Cloninger TCI (TCI-125 in a group of people with borderline personality disorders at Ruzbeh Hospital, Tehran, Iran. "nMethods: In this descriptive cross-sectional study, 27 borderline personality patients were evaluated with a clinical interview based on the Diagnostic and Statistical Manual of Mental Disorders fourth edition text revision (DSM-ІV-TR and Structured Clinical Interview for DSM-ІV Axis IІ (SCIDII. Depression and anxiety scores of patients were assessed using the Beck Depression Inventory (BDI and Beck Anxiety Inventory (BAI questionnaires. Dimensions of temperament and character traits were assessed using the TCI-125. The findings were compared with parameters of the normal Iranian population. "nResults: Results showed higher scores for novelty seeking and harm avoidance and lower scores for self directedness, self transcendence and cooperativeness in borderline personality disorder patients. "nConclusion: The results of the Cloninger TCI in this study showed higher scores for novelty seeking and harm avoidance and lower scores for self directedness than those of the normal Iranian population. Scores for reward dependence fell within the range of the normal population. Lower scores for character factors, such as self directedness, cooperativeness and self transcendence, are usually associated with cluster B personality traits. Higher scores for novelty seeking and harm avoidance are usually characteristic of borderline personality disorder patients. In this study, there is the possibility that the small sample size or other factors, such as medication or substance abuse, might affect the study, resulting in normal scores for reward dependence.

Character and Temperament Dimensions in Subjects with Depressive Disorder: Impact of the Affective State on Their Expression

Directory of Open Access Journals (Sweden)

Stojan Bajraktarov

2017-02-01

CONCLUSION: The people with the recurrent depressive disorder have a different profile of personality traits (temperament and character compared with the control group, and their characteristics depend on their current affective state.

[Development and integration of the Oncological Documentation System ODS].

Science.gov (United States)

Raab, G; van Den Bergh, M

2001-08-01

To simplify clinical routine and to improve medical quality without exceeding the existing resources. Intensifying communication and cooperation between all institutions of patients' health care. The huge amount of documentation work of physicians can no longer be done without modern tools of paperless data processing. The development of ODS was a tight cooperation between physician and technician which resulted in a mutual understanding and led to a high level of user convenience. - At present all cases of gynecology, especially gynecologic oncology can be documented and processed by ODS. Users easily will adopt the system as data entry within different program areas follows the same rules. In addition users can choose between an individual input of data and assistants guiding them through highly specific areas of documentation. ODS is a modern, modular structured and very fast multiuser database environment for in- and outpatient documentation. It automatically generates a lot of reports for clinical day to day business. Statistical routines will help the user reflecting his work and its quality. Documentation of clinical trials according to the GCP guidelines can be done by ODS using the internet or offline datasharing. As ODS is the synthesis of a computer based patient administration system and an oncological documentation database, it represents the basis for the construction of the electronical patient chart as well as the digital documentation of clinical trials. The introduction of this new technology to physicians and nurses has to be done slowly and carefully, in order to increase motivation and to improve the results.

Order-disorder reactions in the ferroelectric perovskites Pb(Sc/sub 1/2/Nb/sub 1/2/)O/sub 3/ and Pb(Sc/sub 1/2/Ta/sub 1/2/)O/sub 3/. 2. Relation between ordering and properties

Energy Technology Data Exchange (ETDEWEB)

Stenger, C G.F.; Burggraaf, A J [Technische Hogeschool Twente, Enschede (Netherlands)

1980-10-16

The ordering of the trivalent and pentavalent cations in the pervoskites Pb(Sc/sub 1/2/Nb/sub 1/2/)O/sub 3/ and Pb(Sc/sub 1/2/Ta/sub 1/2/)O/sub 3/ can be varied by suitable heat treatments. The degree as well as the kind of order strongly affects the character of the FE ..-->.. PE phase transition. A spatially homogeneous disorder leads to a diffuse phase transition whereas a hybrid crystal with a nonhomogeneous disorder shows a sequence of two FE ..-->.. PE transitions.

Morphological assessment of bone mineralization in tibial metaphyses of ascorbic acid-deficient ODS rats.

Science.gov (United States)

Hasegawa, Tomoka; Li, Minqi; Hara, Kuniko; Sasaki, Muneteru; Tabata, Chihiro; de Freitas, Paulo Henrique Luiz; Hongo, Hiromi; Suzuki, Reiko; Kobayashi, Masatoshi; Inoue, Kiichiro; Yamamoto, Tsuneyuki; Oohata, Noboru; Oda, Kimimitsu; Akiyama, Yasuhiro; Amizuka, Norio

2011-08-01

Osteogenic disorder shionogi (ODS) rats carry a hereditary defect in ascorbic acid synthesis, mimicking human scurvy when fed with an ascorbic acid-deficient (aa-def) diet. As aa-def ODS rats were shown to feature disordered bone formation, we have examined the bone mineralization in this rat model. A fibrous tissue layer surrounding the trabeculae of tibial metaphyses was found in aa-def ODS rats, and this layer showed intense alkaline phosphatase activity and proliferating cell nuclear antigen-immunopositivity. Many osteoblasts detached from the bone surfaces and were characterized by round-shaped rough endoplasmic reticulum (rER), suggesting accumulation of malformed collagen inside the rER. Accordingly, fine, fragile fibrillar collagenous structures without evident striation were found in aa-def bones, which may result from misassembling of the triple helices of collagenous α-chains. Despite a marked reduction in bone formation, ascorbic acid deprivation seemed to have no effect on mineralization: while reduced in number, normal matrix vesicles and mineralized nodules could be seen in aa-def bones. Fine needle-like mineral crystals extended from these mineralized nodules, and were apparently bound to collagenous fibrillar structures. In summary, collagen mineralization seems unaffected by ascorbic acid deficiency in spite of the fine, fragile collagenous fibrils identified in the bones of our animal model.

The Knossos Od Series. An Epigraphical Study

DEFF Research Database (Denmark)

Nosch, Marie-Louise Bech

This study is an epigraphical investigation of the Linear B records from the West Wing in the palace of Knossos. Its focus is the group of 61 unclassified Od tablets with the ideogram for wool. The author presents a new classification of the Od tablets by identifying new sets, and by integrating...... unclassified Od tablets into existing Od sets or into other series recording wool, such as the two well known and thoroughly researched "bureaux", the textile and the sheep administration. Recent work by FIRTH on find-places has provided new insights for this study. In the present study, 29 prefix changes...... are suggested. Only few unclassified Od tablets, however, can be associated with the initial parts of textile production in which scribes 103 and 113 set targets and manage the production. Rather, many unclassified Od tablets belong to the final stages of the textile production, that is, the finishing...

Temperament and character profiles in bipolar I, bipolar II and major depressive disorder: Impact over illness course, comorbidity pattern and psychopathological features of depression.

Science.gov (United States)

Zaninotto, Leonardo; Souery, Daniel; Calati, Raffaella; Di Nicola, Marco; Montgomery, Stuart; Kasper, Siegfried; Zohar, Joseph; Mendlewicz, Julien; Robert Cloninger, C; Serretti, Alessandro; Janiri, Luigi

2015-09-15

Studies comparing temperament and character traits between patients with mood disorders and healthy individuals have yielded variable results. The Temperament and Character Inventory (TCI) was administered to 101 bipolar I (BP-I), 96 bipolar II (BP-II), 123 major depressive disorder (MDD) patients, and 125 HS. A series of generalized linear models were performed in order to: (a) compare the TCI dimensions across groups; (b) test any effect of the TCI dimensions on clinical features of mood disorders; and (c) detect any association between TCI dimensions and the psychopathological features of a major depressive episode. Demographic and clinical variables were also included in the models as independent variables. Higher Harm Avoidance was found in BP-II and MDD, but not in BP-I. Higher Self-Transcendence was found in BP-I. Our models also showed higher Self-Directedness in HS, either vs MDD or BP-II. No association was found between any TCI dimension and the severity of symptoms. Conversely, a positive association was found between Harm Avoidance and the overall burden of depressive episodes during lifetime. The cross-sectional design and the heterogeneity of the sample may be the main limitations of our study. In general, our sample seems to support the view of a similar profile of temperament and character between MDD and BP-II, characterized by high Harm Avoidance and low Self-Directedness. In contrast, patients with BP-I only exhibit high Self-Transcendence, having a near-normal profile in terms of Harm Avoidance or Self-Directedness. Copyright © 2015 Elsevier B.V. All rights reserved.

The evolution of internal stress and dislocation during tensile deformation in a 9Cr ferritic/martensitic (F/M) ODS steel investigated by high-energy X-rays

International Nuclear Information System (INIS)

Zhang, Guangming; Zhou, Zhangjian; Mo, Kun; Miao, Yinbin; Liu, Xiang; Almer, Jonathan; Stubbins, James F.

2015-01-01

An application of high-energy wide angle synchrotron X-ray diffraction to investigate the tensile deformation of 9Cr ferritic/martensitic (F/M) ODS steel is presented. With tensile loading and in-situ X-ray exposure, the lattice strain development of matrix was determined. The lattice strain was found to decrease with increasing temperature, and the difference in Young's modulus of six different reflections at different temperatures reveals the temperature dependence of elastic anisotropy. The mean internal stress was calculated and compared with the applied stress, showing that the strengthening factor increased with increasing temperature, indicating that the oxide nanoparticles have a good strengthening impact at high temperature. The dislocation density and character were also measured during tensile deformation. The dislocation density decreased with increasing of temperature due to the greater mobility of dislocation at high temperature. The dislocation character was determined by best-fit methods for different dislocation average contrasts with various levels of uncertainty. The results shows edge type dislocations dominate the plastic strain at room temperature (RT) and 300 °C, while the screw type dislocations dominate at 600 °C. The dominance of edge character in 9Cr F/M ODS steels at RT and 300 °C is likely due to the pinning effect of nanoparticles for higher mobile edge dislocations when compared with screw dislocations, while the stronger screw type of dislocation structure at 600 °C may be explained by the activated cross slip of screw segments. - Highlights: • The tensile deformation of 9Cr ODS steel was studied by synchrotron irradiation. • The evolution of internal mean stress was calculated. • The evolution of dislocation character was determined by best-fit method. • Edge type dominates plasticity at RT and 300 °C, while screw type dominates at 600 °C.

The evolution of internal stress and dislocation during tensile deformation in a 9Cr ferritic/martensitic (F/M) ODS steel investigated by high-energy X-rays

Energy Technology Data Exchange (ETDEWEB)

Zhang, Guangming [School of Materials Science and Engineering, University of Science and Technology, Beijing, Beijing 100083 (China); Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, IL 61801 (United States); Zhou, Zhangjian, E-mail: zhouzhj@mater.ustb.edu.cn [School of Materials Science and Engineering, University of Science and Technology, Beijing, Beijing 100083 (China); Mo, Kun [Nuclear Engineering Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Miao, Yinbin; Liu, Xiang [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, IL 61801 (United States); Almer, Jonathan [X-ray Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Stubbins, James F. [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, IL 61801 (United States)

2015-12-15

An application of high-energy wide angle synchrotron X-ray diffraction to investigate the tensile deformation of 9Cr ferritic/martensitic (F/M) ODS steel is presented. With tensile loading and in-situ X-ray exposure, the lattice strain development of matrix was determined. The lattice strain was found to decrease with increasing temperature, and the difference in Young's modulus of six different reflections at different temperatures reveals the temperature dependence of elastic anisotropy. The mean internal stress was calculated and compared with the applied stress, showing that the strengthening factor increased with increasing temperature, indicating that the oxide nanoparticles have a good strengthening impact at high temperature. The dislocation density and character were also measured during tensile deformation. The dislocation density decreased with increasing of temperature due to the greater mobility of dislocation at high temperature. The dislocation character was determined by best-fit methods for different dislocation average contrasts with various levels of uncertainty. The results shows edge type dislocations dominate the plastic strain at room temperature (RT) and 300 °C, while the screw type dislocations dominate at 600 °C. The dominance of edge character in 9Cr F/M ODS steels at RT and 300 °C is likely due to the pinning effect of nanoparticles for higher mobile edge dislocations when compared with screw dislocations, while the stronger screw type of dislocation structure at 600 °C may be explained by the activated cross slip of screw segments. - Highlights: • The tensile deformation of 9Cr ODS steel was studied by synchrotron irradiation. • The evolution of internal mean stress was calculated. • The evolution of dislocation character was determined by best-fit method. • Edge type dominates plasticity at RT and 300 °C, while screw type dominates at 600 °C.

Character and Temperament Dimensions in Subjects with Depressive Disorder: Impact of the Affective State on Their Expression.

Science.gov (United States)

Bajraktarov, Stojan; Novotni, Antoni; Arsova, Slavica; Gudeva-Nikovska, Dance; Vujovik, Viktorija

2017-03-15

The depression is a cross-cultural condition that occurs in all cultures and within all nations with certain specificities, even though there are some differences in its manifestation. The hereditary load is of major importance, but also the individual personality factors, in the form of risk factors, are associated with the occurrence of depression. Personality characteristics have a significant impact on the occurrence of the recurrent depressive disorder and the outcome of the treatment as well. To identify the specific personality traits in people with the recurrent depressive disorder and the impact of the affective state on them. Three questionnaires were used: a general questionnaire, Beck's scale of depressive symptoms, and TCI-R (inventory for temperament and character). The most indicative differences in the dimensions are found in the Harm avoidance and the Self-direction dimensions, and most variable dimensions dependent on effective state are Novelty seeking and Reward dependence. The people with the recurrent depressive disorder have a different profile of personality traits (temperament and character) compared with the control group, and their characteristics depend on their current affective state.

ODS Alloys for Nuclear Applications

International Nuclear Information System (INIS)

Jang, Jin Sung

2006-01-01

ODS (oxide dispersion strengthening) alloy is one of the potential candidate alloys for the cladding or in reactor components of Generation IV reactors and for the structural material even for fusion reactors. It is widely accepted as very resistant material to neutron irradiation as well as strong material at high temperature due to its finely distributed and stable oxide particles. Among Generation IV reactors SFR and SCWR are anticipated in general to run in the temperature range between 300 and 550 .deg. C, and the peak cladding temperature is supposed to reach at about 620 .deg. C during the normal operation. Therefore Zr.base alloys, which have been widely known and adopted for the cladding material due to their excellent neutron economics, are no more adequate at these operating conditions. Fe-base ODS alloys in general has a good high temperature strength at the above high temperature as well as the neutron resistance. In this study a range of commercial grade ODS alloys and their applications are reviewed, including an investigation of the stability of a commercial grade 20% Cr Fe-base ODS alloy(MA956). The alloy was evaluated in terms of the fracture toughness change along with the aging treatment. Also an attempt of the development of 9% Cr Fe-base ODS alloys is introduced

Association of Beck Depression Inventory score and Temperament and Character Inventory-125 in patients with eating disorders and severe malnutrition

OpenAIRE

Tanaka, Satoshi; Yoshida, Keizo; Katayama, Hiroto; Kohmura, Kunihiro; Kawano, Naoko; Imaeda, Miho; Kato, Saki; Ando, Masahiko; Aleksic, Branko; Nishioka, Kazuo; Ozaki, Norio

2015-01-01

The authors investigated the association between personality and physical/mental status in malnourished patients with eating disorders. A total of 45 patients with anorexia nervosa, avoidant/restrictive food intake disorder, and other specified feeding or eating disorders were included and compared with 39 healthy controls. Personality characteristics and severity of depression were assessed using the Temperament and Character Inventory-125 and Beck?s Depression Inventory. Depression correlat...

Order and disorder in coupled metronome systems

Science.gov (United States)

Boda, Sz.; Davidova, L.; Néda, Z.

2014-04-01

Metronomes placed on a smoothly rotating disk are used for exemplifying order-disorder type phase-transitions. The ordered phase corresponds to spontaneously synchronized beats, while the disordered state is when the metronomes swing in unsynchronized manner. Using a given metronome ensemble, we propose several methods for switching between ordered and disordered states. The system is studied by controlled experiments and a realistic model. The model reproduces the experimental results, and allows to study large ensembles with good statistics. Finite-size effects and the increased fluctuation in the vicinity of the phase-transition point are also successfully reproduced.

The oxidation and corrosion of ODS alloys

Science.gov (United States)

Lowell, Carl E.; Barrett, Charles A.

1990-01-01

The oxidation and hot corrosion of high temperature oxide dispersion strengthened (ODS) alloys are reviewed. The environmental resistance of such alloys are classified by oxide growth rate, oxide volatility, oxide spalling, and hot corrosion limitations. Also discussed are environmentally resistant coatings for ODS materials. It is concluded that ODS NiCrAl and FeCrAl alloys are highly oxidation and corrosion resistant and can probably be used uncoated.

Oxidation And Hot Corrosion Of ODS Alloy

Science.gov (United States)

Lowell, Carl E.; Barrett, Charles A.

1993-01-01

Report reviews oxidation and hot corrosion of oxide-dispersion-strengthened (ODS) alloys, intended for use at high temperatures. Classifies environmental resistances of such alloys by rates of growth of oxides, volatilities of oxides, spalling of oxides, and limitations imposed by hot corrosion. Also discusses environmentally resistant coatings for ODS materials. Concludes ODS NICrAl and FeCrAl alloys highly resistant to oxidation and corrosion and can be used uncoated.

Evaluation of mechanical properties and nano-meso structures of 9–11%Cr ODS steels

Energy Technology Data Exchange (ETDEWEB)

Tanno, Takashi, E-mail: tanno.takashi@jaea.go.jp [Japan Atomic Energy Agency, Oarai, Ibaraki 311-1393 (Japan); Ohtsuka, Satoshi; Yano, Yasuhide; Kaito, Takeji [Japan Atomic Energy Agency, Oarai, Ibaraki 311-1393 (Japan); Oba, Yojiro; Ohnuma, Masato [National Institute for Materials Science, Tsukuba 305-1195 (Japan); Koyama, Shinichi; Tanaka, Kenya [Japan Atomic Energy Agency, Oarai, Ibaraki 311-1393 (Japan)

2013-09-15

Highlights: • We successfully manufactured 11Cr-ODS steels with residual α-ferrite controlled. • Dispersion conditions of nano oxide particles were quantitatively characterized. • Tungsten solid solution could improve only tensile strength of ODS steels at 973 K. • Oxide dispersion strengthening was dominant in creep strength of ODS steels at 973 K. -- Abstract: This study carried out mechanical tests and microstructural characterizations of several 9Cr and 11Cr-ODS tempered martensitic steels. From those results, the appropriate chemical composition range of 11Cr-ODS tempered martensitic steel was discussed from the viewpoint of high temperature strength improvement. It was shown that the residual α-ferrite fraction in 11Cr-ODS steel was successfully controlled to the same level as the 9Cr-ODS steel, which has excellent high temperature strength, by selecting the chemical compositions on the basis of the multi-component phase diagram. The tensile strength decreased with decreasing W content from 2.0 to 1.4 wt%. On the other hand, creep strength at 973 K did not degrade by the decreasing W content. Both tensile strength and creep strength increased with increasing population of the nano-sized oxide particles. Small angle X-ray scattering analysis revealed that titanium and excess oxygen contents were key parameters in order to improve the dispersion conditions of nano-sized oxide particles.

Phase diagram of multiferroic KCu3As2O7(OD ) 3

Science.gov (United States)

Nilsen, Gøran J.; Simonet, Virginie; Colin, Claire V.; Okuma, Ryutaro; Okamoto, Yoshihiko; Tokunaga, Masashi; Hansen, Thomas C.; Khalyavin, Dmitry D.; Hiroi, Zenji

2017-06-01

The layered compound KCu3As2O7(OD ) 3 , comprising distorted kagome planes of S =1 /2 Cu2 + ions, is a recent addition to the family of type-II multiferroics. Previous zero-field neutron diffraction work has found two helically ordered regimes in KCu3As2O7(OD ) 3 , each showing a distinct coupling between the magnetic and ferroelectric order parameters. Here, we extend this work to magnetic fields up to 20 T using neutron powder diffraction, capacitance, polarization, and high-field magnetization measurements, hence determining the H -T phase diagram. We find metamagnetic transitions in both low-temperature phases around μ0Hc˜3.7 T, which neutron powder diffraction reveals to correspond to rotations of the helix plane away from the easy plane, as well as a small change in the propagation vector. Furthermore, we show that the sign of the ferroelectric polarization is reversible in a magnetic field, although no change is observed (or expected on the basis of the magnetic structure) due to the transition at 3.7 T. We finally justify the temperature dependence of the polarization in both zero-field ordered phases by a symmetry analysis of the free energy expansion, and attempt to account for the metamagnetic transition by adding anisotropic exchange interactions to our existing model for KCu3As2O7(OD ) 3 .

Water corrosion resistance of ODS ferritic-martensitic steel tubes

International Nuclear Information System (INIS)

Narita, Takeshi; Ukai, Shigeharu; Kaito, Takeji; Ohtsuka, Satoshi; Matsuda, Yasuji

2008-01-01

Oxide dispersion strengthened (ODS) ferritic-martensitic steels have superior radiation resistance; it is possible to achieve a service temperature of up to around 973 K because of their superior creep strength. These advantages of ODS steels facilities their application to long-life cladding tubes in advanced fast reactor fuel elements. In addition to neutron radiation resistance, sufficient general corrosion resistance to maintain the strength of the cladding, and the stress corrosion cracking (SCC) resistance for spent-fuel-pool cooling systems and high-temperature oxidation for the fuel-clad chemical interaction (FCCI) of ODS ferritic steel are required. Although the addition of Cr to ODS is effective in preventing water corrosion and high-temperature oxidation, an excessively high amount of Cr leads to embrittlement due to the formation of a Cr-rich α' precipitate. The Cr content in 9Cr-ODS martensite and 12Cr-ODS ferrite, the ODS steels developed by the Japan Atomic Energy Agency (JAEA), is controlled. In a previous paper, it has been demonstrated that the resistances of 9Cr- and 12Cr-ODS ferritic-martensitic steels for high-temperature oxidation are superior to those of conventional 12Cr ferritic steel. However, the water corrosion data of ODS ferritic-martensitic steels are very limited. In this study, a water corrosion test was conducted on ODS steels in consideration of the spent-fuel-pool cooling condition, and the results were compared with those of conventional austenitic stainless steel and ferritic-martensitic stainless steel. (author)

Comparison of a polymeric pseudostationary phase in EKC with ODS stationary phase in RP-HPLC.

Science.gov (United States)

Ni, Xinjiong; Zhang, Min; Xing, Xiaoping; Cao, Yuhua; Cao, Guangqun

2018-01-01

Poly(stearyl methacrylate-co-methacrylic acid) (P(SMA-co-MAA)) was induced as pseudostationary phase (PSP) in electrokinetic chromatography (EKC). The n-octadecyl groups in SMA were the same as that in octadecylsilane (ODS) C18 column. Thus, the present work focused on the comparison of selectivity between polymeric PSP and ODS stationary phase (SP), and the effect of organic modifiers on the selectivity of polymeric PSP and ODS SP. 1-butanol could directly interacted with PSP as a Class I modifier, and improved both of the methylene selectivity and polar group selectivity. When the analysis times were similar, the polymeric PSP exhibited better methylene selectivity and polar group selectivity. Although the hydrophobic groups were similar, the substituted benzenes elution order was different between polymeric PSP and ODS SP. Linear solvation energy relationships (LSER) model analysis found that polymeric PSP and ODS SP exhibited two same key factors in selectivity: hydrophobic interaction and hydrogen bonding acidity. But polymeric PSP exhibited relatively strong n- and π-electrons interaction to the analytes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Order, disorder and generalized statistics

International Nuclear Information System (INIS)

Marino, E.C.; Swieca, J.A.

1980-06-01

We generalize the prescription of Kadanoff and Ceva for the computation of disorder variables correlation functions in the Ising model for continuous field theories with U(1) symmetry. By considering the product of order and disorder variables, we obtain a path integral representation for fields with generalized statistics. We discuss in detail the cases of massless Thirring and Schwinger models. (Author) [pt

Order, disorder and generalized statistics

International Nuclear Information System (INIS)

Marino, E.C.; Swieca, J.A.; Pontificia Universidade Catolica do Rio de Janeiro

1980-01-01

We generalize the prescription of Kadanoff and Ceva for the computation of disorder variable correlation functions in the Ising model for continuous field theories with U(1) symmetry. By considering the product of order and disorder variables, we obtain a path integral representation for fields with generalized statistics. We discuss in detail the cases of massless Thirring and Schwinger models. (orig.)

Characterisation of As-deformed microstructure of ODS NI-Base superalloy and ODS ferritic steel prior to directional recrystallisation

International Nuclear Information System (INIS)

Baloch, M.M.; Memon, S.A.

2007-01-01

The materials studied are unusual in the sense that they have been prepared from mechanically alloyed procedures, including compaction and hot extrusion. It was felt necessary to characterise the initial microstructure thoroughly prior to directional recrystallisation of the alloys. Following consolidation by hot extrusion, dispersion strengthened superalloys appear to display a very fine sub-micron grain size consisting of both dislocation free recrystallised material and un- recrystallised regions of high dislocation density. It is found that there is a very fine dislocation cell structure in the ODS (Oxide Dispersion Strengthened) Ferritic stainless Steel prior to recrystallisation treatment, which shows that alloy is in old-deformed condition after mechanical alloying, extrusion I hot-working. This is in contrast to the mechanically alloyed Nickel Base Superalloy, which have consistently been found to be in primary recrystallisation state following extrusion. In order to understand the recrystallisation behaviour of the two mechanically illoyed materials with commercial designations MA6000 and MA956, a measurement of the orientation relationship between adjacent grains in the as- deformed ODS alloys has also been carried out using Transmission Electron microscope. (author)

Growth and characterization of GaInP unicompositional disorder-order-disorder quantum wells

International Nuclear Information System (INIS)

Schneider, R.P. Jr.; Jones, E.D.; Follstaedt, D.M.

1994-01-01

Metalorganic vapor phase epitaxy (MOVPE) is used to grow unicompositional quantum-well (QW) structures, in which the QW and barrier layers are composed of ordered and disordered GaInP, respectively. Transmission electron dark-field micrographs reveal abrupt interfaces between highly ordered QWs and disordered barriers, with no evidence of defect formation. Low-temperature photoluminescence from the structures exhibits relatively broad emission peaks, with emission energy increasing with decreasing QW thickness. The dependence of emission energy on well thickness can be described by a finite square well model only when a type-II band alignment is taken for the heterostructure, in which the conduction band edge of the ordered GaInP QW lies about 135--150 meV below that of the disordered barrier material. These results demonstrate a high degree of control over the ordering process in MOVPE, such that quantum size effects can be realized solely through disorder-order phenomena. Further, the data provide strong support for a type-II (spatially indirect) recombination transition between ordered and disordered GaInP

A puzzling combination: disorder X order

International Nuclear Information System (INIS)

Hasenfratz, P.

1979-01-01

There are several examples indicating that the operator combination 'disorder X order' creates anomalous spin and/or statistics. In 2 + 1 dimensions there is a similar anomaly related to the disorder operator carrying Z(N) topological charge believed to have an important role in quark confinement. The conventionally defined total angular momentum has an anomalous term 1/2 sigma 3 ((1/√3) lambda 8 ) and can take the values 1/2 (1/3) in the presence of 'disorder X order' in 2 + 1 dimensional SU(2) (SU(3)) gauge theories. It is argued that the existence of a stable soliton solution or the introduction of Higgs fields are not important for the anomaly. (Auth.)

Metabolic cooperation of ascorbic acid and glutathione in normal and vitamin C-deficient ODS rats.

Science.gov (United States)

Wang, Y; Kashiba, M; Kasahara, E; Tsuchiya, M; Sato, E F; Utsumi, K; Inoue, M

2001-01-01

Although the coordination of various antioxidants is important for the protection of organisms from oxidative stress, dynamic aspects of the interaction of endogenous antioxidants in vivo remain to be elucidated. We studied the metabolic coordination of two naturally occurring water-soluble antioxidants, ascorbic acid (AA) and reduced glutathione (GSH), in liver, kidney and plasma of control and scurvy-prone osteogenic disorder Shionogi (ODS) rats that hereditarily lack the ability to synthesize AA. When supplemented with AA, its levels in liver and kidney of ODS rats increased to similar levels of those in control rats. Hepato-renal levels of glutathione were similar with the two animal groups except for the slight increase in its hepatic levels in AA-supplemented ODS rats. Administration of L-buthionine sulfoximine (BSO), a specific inhibitor of GSH synthesis, rapidly decreased the hepato-renal levels of glutathione in a biphasic manner, a rapid phase followed by a slower phase. Kinetic analysis revealed that glutathione turnover was enhanced significantly in liver mitochondria and renal cytosol of ODS rats. Administration of BSO significantly increased AA levels in the liver and kidney of control rats but decreased them in AA-supplemented ODS rats. Kinetic analysis revealed that AA is synthesized by control rat liver by some BSO-enhanced mechanism and the de novo synthesized AA is transferred to the kidney. Such a coordination of the metabolism of GSH and AA in liver and kidney is suppressed in AA-deficient ODS rats. These and other results suggest that the metabolism of AA and GSH forms a compensatory network by which oxidative stress can be decreased.

First-order character of the displacive structural transition in BaWO4

International Nuclear Information System (INIS)

Tan Da-Yong; Xiao Wan-Sheng; Zhou Wei; Chen Ming; Xiong Xiao-Lin; Song Mao-Shuang

2012-01-01

Nearly all displacive transitions have been considered to be continuous or second order, and the rigid unit mode (RUM) provides a natural candidate for the soft mode. However, in-situ X-ray diffraction and Raman measurements show clearly the first-order evidences for the scheelite-to-fergusonite displacive transition in BaWO 4 : a 1.6% volume collapse, coexistence of phases, and hysteresis on release of pressure. Such first-order signatures are found to be the same as the soft modes in BaWO 4 , which indicates the scheelite-to-fergusonite displacive phase transition hides a deeper physical mechanism. By the refinement of atomic displacement parameters, we further show that the first-order character of this phase transition stems from a coupling of large compression of soft BaO 8 polyhedrons to the small displacive distortion of rigid WO 4 tetrahedrons. Such a coupling will lead to a deeper physical insight in the phase transition of the common scheelite-structured compounds. (condensed matter: structural, mechanical, and thermal properties)

Radiation response of ODS ferritic steels with different oxide particles under ion-irradiation at 550 °C

Science.gov (United States)

Song, Peng; Morrall, Daniel; Zhang, Zhexian; Yabuuchi, Kiyohiro; Kimura, Akihiko

2018-04-01

In order to investigate the effects of oxide particles on radiation response such as hardness change and microstructural evolution, three types of oxide dispersion strengthened (ODS) ferritic steels (named Y-Ti-ODS, Y-Al-ODS and Y-Al-Zr-ODS), mostly strengthened by Y-Ti-O, Y-Al-O and Y-Zr-O dispersoids, respectively, were simultaneously irradiated with iron and helium ions at 550 °C up to a damage of 30 dpa and a corresponding helium (He) concentration of ∼3500 appm to a depth of 1000-1300 nm. A single iron ion beam irradiation was also performed for reference. Transmission electron microscopy revealed that after the dual ion irradiation helium bubbles of 2.8, 6.6 and 4.5 nm in mean diameter with the corresponding number densities of 1.1 × 1023, 2.7 × 1022 and 3.6 × 1022 m-3 were observed in Y-Ti-ODS, Y-Al-ODS and Y-Al-Zr-ODS, respectively, while no such bubbles were observed after single ion irradiation. About 80% of intragranular He bubbles were adjacent to oxide particles in the ODS ferritic steels. Although the high number density He bubbles were observed in the ODS steels, the void swelling in Y-Ti-ODS, Y-Al-ODS and Y-Al-Zr-ODS was still small and estimated to be 0.13%, 0.53% and 0.20%, respectively. The excellent swelling resistance is dominantly attributed to the high sink strength of oxide particles that depends on the morphology of particle dispersion rather than the crystal structure of the particles. In contrast, no dislocation loops were produced in any of the irradiated steels. Nanoindentation measurements showed that no irradiation hardening but softening was found in the ODS ferritic steels, which was probably due to irradiation induced dislocation recovery. The helium bubbles in high number density never contributed to the irradiation hardening of the ODS steels at these irradiation conditions.

High yttria ferritic ODS steels through powder forging

Energy Technology Data Exchange (ETDEWEB)

Kumar, Deepak [Department of Metallurgical and Materials Engineering, I.I.T-Roorkee, Uttarakhand 247667 (India); Prakash, Ujjwal, E-mail: ujwalfmt@iitr.ac.in [Department of Metallurgical and Materials Engineering, I.I.T-Roorkee, Uttarakhand 247667 (India); Dabhade, Vikram V. [Department of Metallurgical and Materials Engineering, I.I.T-Roorkee, Uttarakhand 247667 (India); Laha, K.; Sakthivel, T. [Mechanical Metallurgy Group, IGCAR, Kalpakkam, Tamilnadu 603102 (India)

2017-05-15

Oxide dispersion strengthened (ODS) steels are being developed for future nuclear reactors. ODS Fe-18%Cr-2%W-0.2%Ti steels with 0, 0.35, 0.5, 1 and 1.5% Y{sub 2}O{sub 3} (all compositions in weight%) dispersion were fabricated by mechanical alloying of elemental powders. The powders were placed in a mild steel can and forged in a stream of hydrogen gas at 1473 K. The steels were forged again to final density. The strength of ODS steel increased with yttria content. Though this was accompanied by a decrease in tensile elongation, all the steels showed significant ductility. The ductility in high yttria alloys may be attributed to improved inter-particle bonding between milled powders due to reduction of surface oxides by hydrogen. This may permit development of ODS steels with yttria contents higher than the conventional limit of 0.5%. It is suggested that powder forging is a promising route to fabricate ODS steels with high yttria contents and improved ductility. - Highlights: •ODS steels with yttria contents beyond the conventional limit of 0.5 wt% were fabricated by powder forging in a hydrogen atmosphere. •All the alloys exhibited significant ductility. •This may be attributed to improved inter-particle bonding due to reduction of surface oxides by hydrogen. •Strength in excess of 300 MPa was obtained at 973 K for 0.5%, 1% and 1.5% yttria ODS alloys. •Powder forging is a promising route to fabricate ODS steels and permits development of compositions with up to 1.5% yttria.

Structure of ordered and disordered α-brass

International Nuclear Information System (INIS)

Mu''ller, S.; Zunger, Alex

2001-01-01

Alloys of copper and zinc (brass) have been widely used since Neolithic times due to the discovery that unlike regular copper this alloy can be worked ''cold'' around a 3:1 copper-to-zinc ratio. While it is now known that the as-grown system is a disordered fcc solid solution, no 3:1 ordered phase has yet been directly observed even though the negative mixing enthalpy of the disordered alloy suggests ordering tendencies. Moreover, neutron scattering experiments have been deduced that this disordered alloy contains peculiar chains of Zn atoms. We have expressed the first-principles calculated total energy of general Cu-Zn fcc-lattice configurations using a mixed-space cluster expansion. Application of Monte Carlo--simulated annealing to this generalized Ising-like Hamiltonian produces the predicted low-temperature ground state as well as finite-temperature phase diagram and short-range order. We find (i) that at low temperature the disordered fcc alloy will order into the DO 23 structure, (ii) the high-temperature short-range order in close agreement with experiment, and (iii) chains of Zn atoms in the [001] direction, as seen experimentally. Furthermore, our model allows a detailed study of the influence and importance of strain on the phase stability

Water corrosion test of oxide dispersion strengthened (ODS) steel claddings

International Nuclear Information System (INIS)

Narita, Takeshi; Ukai, Shigeharu; Kaito, Takeji; Ohtsuka, Satoshi; Matsuda, Yasushi

2006-07-01

As a part of feasibility study of ODS steel cladding, its water corrosion resistance was examined under water pool condition. Although addition of Cr is effective for preventing water corrosion, excessive Cr addition leads to embrittlement due to the Cr-rich α' precipitate formation. In the ODS steel developed by the Japan Atomic Energy Agency (JAEA), the Cr content is controlled in 9Cr-ODS martensite and 12Cr-ODS ferrite. In this study, water corrosion test was conducted for these ODS steels, and their results were compared with that of conventional austenitic stainless steel and ferritic-martensitic stainless steel. Following results were obtained in this study. (1) Corrosion rate of 9Cr-ODS martensitic and 12Cr-ODS ferritic steel are significantly small and no pitting was observed. Thus, these ODS steels have superior resistance for water corrosion under the condition of 60degC and pH8-12. (2) It was showed that 9Cr-ODS martensitic steel and 12Cr-ODS ferritic steel have comparable water corrosion resistance to that of PNC316 and PNC-FMS at 60degC for 1,000h under varying pH of 8, 10. Water corrosion resistance of these alloys is slightly larger than that of PNC316 and PNC-FMS at pH12 without significant difference of appearance and uneven condition. (author)

Measurement of temperament and character in mood disorders: a model of fundamental states as personality types.

Science.gov (United States)

Cloninger, C R; Bayon, C; Svrakic, D M

1998-10-01

Personality assessment may allow reliable measurement of risk of mood disorders. A group of adults (804) representative of the general population were assessed by questionnaire. Personality types were measured by the Temperament and Character Inventory (TCI). Specific TCI configurations define personality types that can be described as hyperthymic, cyclothymic, irritable, and depressive. Each type had a unique profile of emotions, suicide attempts, and hospitalization. TCI traits are associated with mood disorders. Different ways of measuring Kraepelinean subtypes may disagree. Whether differences in personality cause psychopathology, or vice versa, remains uncertain. Personality profiles help in assessing suicidality and planning treatment.

Positron annihilation characteristics of ODS and non-ODS EUROFER isochronally annealed

International Nuclear Information System (INIS)

Ortega, Y.; Castro, V. de; Monge, M.A.; Munoz, A.; Leguey, T.; Pareja, R.

2008-01-01

Yttrium oxide dispersion strengthened (ODS) and non-ODS EUROFER produced by mechanical alloying and hot isostatic pressing have been subjected to isochronal annealing up to 1523 K, and the evolution of the open-volume defects and their thermal stability have been investigated using positron lifetime and coincidence Doppler broadening (CDB) techniques. Transmission electron microscopy (TEM) observations have also been performed on the studied samples to verify the characteristics of the surviving defects after annealing at 1523 K. The CDB spectra of ODS EUROFER exhibit a characteristic signature that is attributed to positron annihilation in Ar-decorated cavities at the oxide particle/matrix interfaces. The variation of the positron annihilation parameters with the annealing temperature shows three stages: up to 623 K, between 823 and 1323 K, and above 1323 K. Three-dimensional vacancy clusters, or voids, are detected in either materials in as-HIPed condition and after annealing at T ≤ 623 K. In the temperature range 823-1323 K, these voids' growth and nucleation and the growth of other new species of voids take place. Above 1323 K, some unstable cavities start to anneal out, and cavities associated to oxide particles and other small precipitates survive to annealing at 1523 K. The TEM observations and the positron annihilation results indicate that these cavities should be decorated with Ar atoms absorbed during the mechanical alloying process

Positron annihilation characteristics of ODS and non-ODS EUROFER isochronally annealed

Energy Technology Data Exchange (ETDEWEB)

Ortega, Y. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)], E-mail: yanicet@fis.ucm.es; Castro, V. de; Monge, M.A.; Munoz, A.; Leguey, T.; Pareja, R. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)

2008-05-31

Yttrium oxide dispersion strengthened (ODS) and non-ODS EUROFER produced by mechanical alloying and hot isostatic pressing have been subjected to isochronal annealing up to 1523 K, and the evolution of the open-volume defects and their thermal stability have been investigated using positron lifetime and coincidence Doppler broadening (CDB) techniques. Transmission electron microscopy (TEM) observations have also been performed on the studied samples to verify the characteristics of the surviving defects after annealing at 1523 K. The CDB spectra of ODS EUROFER exhibit a characteristic signature that is attributed to positron annihilation in Ar-decorated cavities at the oxide particle/matrix interfaces. The variation of the positron annihilation parameters with the annealing temperature shows three stages: up to 623 K, between 823 and 1323 K, and above 1323 K. Three-dimensional vacancy clusters, or voids, are detected in either materials in as-HIPed condition and after annealing at T {<=} 623 K. In the temperature range 823-1323 K, these voids' growth and nucleation and the growth of other new species of voids take place. Above 1323 K, some unstable cavities start to anneal out, and cavities associated to oxide particles and other small precipitates survive to annealing at 1523 K. The TEM observations and the positron annihilation results indicate that these cavities should be decorated with Ar atoms absorbed during the mechanical alloying process.

A prospective evaluation of occult disorders in obstructed defecation using the 'iceberg diagram'.

Science.gov (United States)

Pescatori, M; Spyrou, M; Pulvirenti d'Urso, A

2007-06-01

Surgical treatment of constipation and obstructed defecation (OD) carries frequent recurrences, as OD is an 'iceberg syndrome' characterized by 'underwater rocks' or occult diseases which may affect the outcome of surgery. The aim of this study was to evaluate occult disorders, in order to alert the clinician of these and minimize failures. One hundred consecutive constipated patients with OD symptoms, 81 women, median age 52 years, underwent perineal examination, proctoscopy, anorectal manometry and anal/vaginal ultrasound (US). Anorectal physiology and imaging tests were also carried out when indicated, as well as psychological and urogynaecological consultations. Symptoms were graded using a modified 1-20 constipation score. Both evident (e.g. rectocele) and occult (e.g. anismus) diseases were prospectively evaluated using a novel 'iceberg diagram'. The type of treatment, whether conservative or surgical, was also recorded. Fifty-four (54%) patients had both mucosal prolapse and rectocele. All patients had at least two occult OD-related diseases, 66 patients had at least three of them: anxiety-depression, anismus and rectal hyposensation were the most frequent (66%, 44% and 33%, respectively). The median constipation score was 11 (range 2-20), the median number of 'occult disorders' was 5 (range 2-8). Conservative treatment was carried out in most cases. Surgery was carried out in 14 (14%) patients. The novel 'iceberg diagram' allowed the adequate evaluation of OD-related occult diseases and better selection of patients for treatment. Most were managed conservatively, and only a minority were treated by surgery.

High Cr ODS steels R and D for high burnup fuel cladding

International Nuclear Information System (INIS)

Kimura, A.; Kasada, R.; Kishimoto, H.; Iwata, N.; Cho, H.-S.; Toda, N.; Yutani, K.; Ukai, S.; Fujiwara, M.

2007-01-01

High-performance cladding materials is essential to realize highly efficient and high-burnup operation over 150 GWd/t of so called Generation IV nuclear energy systems, such as supercritical-water-cooled reactor (SCWR) and lead-cooled fast reactor (LFR). Oxide dispersion strengthening (ODS) ferritic/ martensitic steels, which contain 9-12%Cr, show rather high resistance to neutron irradiation embrittlement and high strength at elevated temperatures. However, their corrosion resistance is not good enough in SCW and in lead at high temperatures. High-Cr ODS steels have been developed to improve corrosion resistance. An increase in Cr content an addition resulted in a drastic improvement of corrosion resistance in SCW and in lead. On the contrary, high-Cr steels often show an enhancement of aging embrittlement as well as irradiation embrittlement. Anisotropy in tensile properties is another issue. In order to overwhelm these issues, surveillance tests of the material performance have been performed for high Cr-ODS steels produced by new processing technologies. It is demonstrated that the dispersion of nono-sized oxide particles in high density is effective to attain high-performance and high-Cr ODS steels have a high potential as fuel cladding materials for SCWR and LFR with high efficiency and high burnup. (authors)

A psychoanalytical interpretation of the characters in A.C. Jordan’s novel Ingqumbo yeminyanya

Directory of Open Access Journals (Sweden)

L.L. Kwatsha

2007-07-01

Full Text Available Psychoanalysis is a way of treating certain nervous disorders of the mind by examining all the ways that sufferers can be helped to remember their past life, dreams, et cetera. This is an effort to find hidden forgotten anxieties or desires influencing one’s behaviour without one’s knowledge thereof. The aim of this article is to make a detailed interpretation of the characters Zwelinzima and Thembeka/Nobantu in A.C. Jordan’s novel, “Ingqumbo yeminyanya”, so as “to uncover the hidden causes of the neurosis in order to relieve the character of his or her conflicts, thus dissolving the distressing symptoms” (Gräbe, 1986. This article will look at the behaviour of the different characters in Jordan’s novel. Psychoanalysis is rooted in the idea that humans have unconscious longings that must be analysed in order to understand behaviour. The accent of the article will fall on how psychoanalysis can help the reader, critic or analyst to penetrate the inner workings of the minds of the characters.

High yttria ferritic ODS steels through powder forging

Science.gov (United States)

Kumar, Deepak; Prakash, Ujjwal; Dabhade, Vikram V.; Laha, K.; Sakthivel, T.

2017-05-01

Oxide dispersion strengthened (ODS) steels are being developed for future nuclear reactors. ODS Fe-18%Cr-2%W-0.2%Ti steels with 0, 0.35, 0.5, 1 and 1.5% Y2O3 (all compositions in weight%) dispersion were fabricated by mechanical alloying of elemental powders. The powders were placed in a mild steel can and forged in a stream of hydrogen gas at 1473 K. The steels were forged again to final density. The strength of ODS steel increased with yttria content. Though this was accompanied by a decrease in tensile elongation, all the steels showed significant ductility. The ductility in high yttria alloys may be attributed to improved inter-particle bonding between milled powders due to reduction of surface oxides by hydrogen. This may permit development of ODS steels with yttria contents higher than the conventional limit of 0.5%. It is suggested that powder forging is a promising route to fabricate ODS steels with high yttria contents and improved ductility.

Resilience of hidden order to symmetry-preserving disorder

Science.gov (United States)

Strinati, Marcello Calvanese; Rossini, Davide; Fazio, Rosario; Russomanno, Angelo

2017-12-01

We study the robustness of nonlocal string order in two paradigmatic disordered spin-chain models, a spin-1/2 cluster-Ising and a spin-1 XXZ Heisenberg chain. In the clean case, they both display a transition from antiferromagnetic to string order. Applying a disorder, which preserves the Hamiltonian symmetries, we find that the transition persists in both models. In the disordered cluster-Ising model, we can study the transition analytically—by applying the strongest coupling renormalization group —and numerically—by exploiting integrability to study the antiferromagnetic and string order parameters. We map the model into a quadratic fermion chain, where the transition appears as a change in the number of zero-energy edge modes. We also explore its zero-temperature-singularity behavior and find a transition from a nonsingular to a singular region, at a point that is different from the one separating nonlocal and local ordering. The disordered Heisenberg chain can be treated only numerically: by means of MPS-based simulations, we are able to locate the existence of a transition between antiferromagnetic and string-ordered phase, through the study of order parameters. Finally, we discuss possible connections of our findings with many-body localization.

Inhibited Aluminization of an ODS FeCr Alloy

International Nuclear Information System (INIS)

Vande Put Ep Rouaix, Aurelie; Pint, Bruce A.

2012-01-01

Aluminide coatings are of interest for fusion energy applications both for compatibility with liquid Pb-Li and to form an alumina layer that acts as a tritium permeation barrier. Oxide dispersion strengthened (ODS) ferritic steels are a structural material candidate for commercial reactor concepts expected to operate above 600 C. Aluminizing was conducted in a laboratory scale chemical vapor deposition reactor using accepted conditions for coating Fe- and Ni-base alloys. However, the measured mass gains on the current batch of ODS Fe-14Cr were extremely low compared to other conventional and ODS alloys. After aluminizing at two different Al activities at 900 C and at 1100 C, characterization showed that the ODS Fe-14Cr specimens formed a dense, primarily AlN layer that prevented Al uptake. This alloy batch contained a higher (> 5000 ppma) N content than the other alloys coated and this is the most likely reason for the inhibited aluminization. Other factors such as the high O content, small (∼ 140 nm) grain size and Y-Ti oxide nano-clusters in ODS Fe-14Cr also could have contributed to the observed behavior. Examples of typical aluminide coatings formed on conventional and ODS Fe- and Ni-base alloys are shown for comparison.

The effect of organisational context on organisational development (OD interventions

Directory of Open Access Journals (Sweden)

Sanjana Brijball Parumasur

2012-05-01

Research purpose: This article examines national and international OD practices. It assesses the effect of diverse cultures and cultural values for determining the effectiveness of OD interventions. Motivation for the study: Most organisational change and development programmes fail and only a few result in increased competitiveness, improvements and profitability. This emphasises the need for change interventions to give sufficient attention to leadership, cultures, managing change and adopting context-based OD interventions. Research design, approach and method: This article is a literature review of the current trends and research in the area of OD interventions. It synthesises the influence that cultures and cultural orientations have on determining which OD intervention strategies organisations should adopt in different cultures. Main findings: The analysis emphasises how important it is to achieve congruence between the OD interventions organisations select and their local cultures. Practical/managerial implications: It is important to note the evolving nature of the political and economic climates that influence national cultures and that they emphasise that interventions that reflect OD values, which are tailor-made and shaped to the needs of local cultures, are necessary. Contribution/value-add: This study links various OD interventions to Hofstede’s dimensions for differentiating national cultures. It provides guidelines for aligning the practices and techniques of OD to the values and cultures of the organisations and societies in which they are to be implemented.

Effect of docosahexaenoic acid and ascorbate on peroxidation of retinal membranes of ODS rats.

Science.gov (United States)

Wang, Jin-Ye; Sekine, Seiji; Saito, Morio

2003-04-01

Mutant male osteogenic disorder Shionogi (ODS) rats, unable to synthesize ascorbic acid, were fed diets containing a high content of docosahexaenoic acid (DHA) and different amounts of ascorbic acid, to study the effect of DHA on peroxidative susceptibility of the retina and possible antioxidant action of ascorbic acid. ODS rats were fed from 7 weeks of age with diets containing high DHA (6.4% of total energy). A control group received a diet high in linoleic acid. The diets also contained varying amounts of ascorbic acid. Fatty acid compositions and phospholipid hydroperoxides in rod outer segment (ROS) membranes, and retinal ascorbic acid were analyzed. DHA in ROS membranes was significantly increased in rats fed high DHA, compared with the linoleic acid diet. Levels of phospholipid hydroperoxides in the DHA-fed rats were significantly higher than the linoleic acid-fed rats. Ascorbic acid supplementation did not suppress the phospholipid hydroperoxide levels after a high DHA diet, even when the supplement increased the content of retinal ascorbic acid. In conclusion, high DHA feeding induced a marked increase of phospholipid hydroperoxides in ROS membranes of ODS rats. Supplementation of ascorbic acid did not reverse this increase.

Irradiation response of ODS Eurofer97 steel

Energy Technology Data Exchange (ETDEWEB)

Luzginova, N.V., E-mail: luzginova@nrg.eu [Nuclear Research and Consultancy Group, Petten (Netherlands); Nolles, H.S.; Pierick, P. ten; Bakker, T.; Mutnuru, R.K.; Jong, M.; Blagoeva, D.T. [Nuclear Research and Consultancy Group, Petten (Netherlands)

2012-09-15

Oxide dispersion strengthened (ODS) Eurofer97 steel (EU batch, 0.3 wt.% of Y{sub 2}O{sub 3} particles), produced by mechanical alloying followed by hot rolling, is irradiated in the High Flux Reactor in Petten, The Netherlands at three different irradiation temperatures (300, 450 and 550 Degree-Sign C) up to nominal doses of 1 dpa and 3 dpa. The effect of neutron irradiation on the mechanical properties of ODS Eurofer97 material is investigated. It is shown that the irradiation hardening of ODS Eurofer97 steel occurs at 300 Degree-Sign C, whereas during irradiation at 450 and 550 Degree-Sign C no changes in mechanical properties are observed compared to the unirradiated material. This effect is possibly a result of the annealing of the irradiation damage at temperatures higher than 300 Degree-Sign C. The observed shifts in the Ductile to Brittle Transition Temperatures due to irradiation at different temperatures are discussed and compared with non-ODS Eurofer97 steel.

Effect of two-stage sintering process on microstructure and mechanical properties of ODS tungsten heavy alloy

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyong H. [Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 373-1 Kusong-dong, Yusong-gu, Taejon 305-701 (Korea, Republic of); Cha, Seung I. [International Center for Young Scientists, National Institute for Materials Science 1-1, Namiki, Tsukuba 305-0044 (Japan); Ryu, Ho J. [DUPIC, Korea Atomic Energy Research Institute, 150 Deokjin-dong, Yusong-gu, Taejon 305-353 (Korea, Republic of); Hong, Soon H. [Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 373-1 Kusong-dong, Yusong-gu, Taejon 305-701 (Korea, Republic of)], E-mail: shhong@kaist.ac.kr

2007-06-15

Oxide dispersion strengthened (ODS) tungsten heavy alloys have been considered as promising candidates for advanced kinetic energy penetrator due to their characteristic fracture mode compared to conventional tungsten heavy alloy. In order to obtain high relative density, the ODS tungsten heavy alloy needs to be sintered at higher temperature for longer time, however, induces growth of tungsten grains. Therefore, it is very difficult to obtain controlled microstructure of ODS tungsten heavy alloy having fine tungsten grains with full densification. In this study, two-stage sintering process, consisted of primary solid-state sintering and followed by secondary liquid phase sintering, was introduced for ODS tungsten heavy alloys. The mechanically alloyed 94W-4.56Ni-1.14Fe-0.3Y{sub 2}O{sub 3} powders are solid-state sintered at 1300-1450 deg. C for 1 h in hydrogen atmosphere, and followed by liquid phase sintering temperature at 1465-1485 deg. C for 0-60 min. The microstructure of ODS tungsten heavy alloys showed high relative density above 97%, with contiguous tungsten grains after primary solid-state sintering. The microstructure of solid-state sintered ODS tungsten heavy alloy was changed into spherical tungsten grains embedded in W-Ni-Fe matrix during secondary liquid phase sintering. The two-stage sintered ODS tungsten heavy alloy from mechanically alloyed powders showed finer microstructure and higher mechanical properties than conventional liquid phase sintered alloy. The mechanical properties of ODS tungsten heavy alloys are dependent on the microstructural parameters such as tungsten grain size, matrix volume fraction and tungsten/tungsten contiguity, which can be controlled through the two-stage sintering process.

High temperature oxidation test of oxide dispersion strengthened (ODS) steel claddings

International Nuclear Information System (INIS)

Narita, Takeshi; Ukai, Shigeharu; Kaito, Takeji; Ohtsuka, Satoshi; Matsuda, Yasushi

2006-07-01

In a feasibility study of ODS steel cladding, its high temperature oxidation resistance was evaluated. Although addition of Cr is effective for preventing high temperature oxidation, excessively higher amount of Cr leads to embrittlement due to the Cr-rich α' precipitate formation. In the ODS steel developed by the Japan Atomic Energy Agency (JAEA), the Cr content is controlled in 9Cr-ODS martensite and 12Cr-ODS ferrite. In this study, high temperature oxidation test was conducted for ODS steels, and their results were compared with that of conventional austenitic stainless steel and ferritic-martensitic stainless steel. Following results were obtained in this study. (1) 9Cr-ODS martensitic and 12Cr-ODS ferritic steel have superior high temperature oxidation resistance compared to 11mass%Cr PNC-FMS and even 17mass% SUS430 and equivalent to austenitic PNC316. (2) The superior oxidation resistance of ODS steel was attributed to earlier formation of the protective alpha-Cr 2 O 3 layer at the matrix and inner oxide scale interface. The grain size of ODS steel is finer than that of PNC-FMS, so the superior oxidation resistance of ODS steel can be attributed to the enhanced Cr-supplying rate throughout the accelerated grain boundary diffusion. Finely dispersed Y 2 O 3 oxide particles in the ODS steel matrix may also stabilized the adherence between the protective alpha-Cr 2 O 3 layer and the matrix. (author)

Oropharyngeal and laryngeal sensory innervation in the pathophysiology of swallowing disorders and sensory stimulation treatments.

Science.gov (United States)

Alvarez-Berdugo, Daniel; Rofes, Laia; Casamitjana, J Francesc; Padrón, Andreína; Quer, Miquel; Clavé, Pere

2016-09-01

Oropharyngeal dysphagia (OD) affects older and neurological patients, causing malnutrition and dehydration and increasing the risk for aspiration pneumonia. There is evidence that sensory deficits in those populations are closely related to swallowing disorders, and several research groups are developing new therapies based on sensory stimulation of this area. More information on the sensory innervation participating in the swallow response is needed to better understand the pathophysiology of OD and to develop new treatments. This review focuses on the sensory innervation of the human oropharynx and larynx in healthy people compared with patients with swallowing disorders in order to unravel the abnormalities that may lead to the loss of sensitivity in patients with OD. We also hypothesize the pathway through which active sensory-enhancement treatments may elicit their therapeutic effect on patients with swallowing dysfunctions. As far as we know, this is the first time a review covers the anatomy, histology, ultrastructure, and molecular biology of the sensory innervation of the swallowing function. © 2016 New York Academy of Sciences.

46 CFR 280.4 - Standards governing payment of ODS.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Standards governing payment of ODS. 280.4 Section 280.4... Standards governing payment of ODS. (a) Full payment. Except to the extent otherwise provided in § 280.8, ODS shall be paid in full to the operator for vessel operations on the inbound and outbound legs of...

Tunability of Open-Shell Character, Charge Asymmetry, and Third-Order Nonlinear Optical Properties of Covalently Linked (Hetero)Phenalenyl Dimers.

Science.gov (United States)

Minamida, Yuka; Kishi, Ryohei; Fukuda, Kotaro; Matsui, Hiroshi; Takamuku, Shota; Yamane, Masaki; Tonami, Takayoshi; Nakano, Masayoshi

2018-02-06

Tunability of the open-shell character, charge asymmetry, and third-order nonlinear optical (NLO) properties of covalently linked (hetero)phenalenyl dimers are investigated by using the density functional theory method. By changing the molecular species X and substitution position (i, j) for the linker part, a variety of intermonomer distances R and relative alignments between the phenalenyl dimers can be realized from the geometry optimizations, resulting in a wide-range tuning of diradical character y and charge asymmetry. It is found that the static second hyperpolarizabilities along the stacking direction, γ yyyy , are one-order enhanced for phenalenyl dimer systems exhibiting intermediate y, a feature that is in good agreement with the "y-γ correlation". By replacing the central carbon atoms of the phenalenyl rings with a boron or a nitrogen, we have also designed covalently linked heterophenalenyl dimers. The introduction of such a charge asymmetry to the open-shell systems, which leads to closed-shell ionic ground states, is found to further enhance the γ yyyy values of the systems having longer intermonomer distance R with intermediate ionic character, that is, charge asymmetry. The present results demonstrate a promising potential of covalently linked NLO dimers with intermediate open-shell/ionic characters as a new building block of highly efficient NLO systems. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

46 CFR 280.9 - Special rules for last year of ODS agreement.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Special rules for last year of ODS agreement. 280.9... LINER OPERATORS § 280.9 Special rules for last year of ODS agreement. (a) Reduction in payment of ODS. ODS payable during the last year of any ODS agreement shall be reduced, as provided in paragraph (b...

Reduction in Defect Content in ODS Alloys

Energy Technology Data Exchange (ETDEWEB)

Ritherdon, J.; Jones, A.R.

2000-02-01

The work detailed within this report is a continuation of earlier work that was carried out under contract number IDX-SY382V. The earlier work comprised a literature review of the sources and types of defects found principally in Fe-based ODS alloys together with a series of experiments designed to identify defects in ODS Fe{sub 3}Al material and recommend methods of defect reduction. Defects found in the Mechanically Alloyed (MA) ODS Fe{sub 3}Al included regions of incomplete MA, porosity, intrusions and fine-grained stringers. Some defects tended to be found in association with one another e.g. intrusions and fine-grained stringers. Preliminary powder separation experiments were also performed. The scope and objectives of the present work were laid out in the technical proposal ``Reduction in Defect Content in ODS Alloys--II'' which formed the basis of amendment 3 of the current contract. The current studies were devised in the context of the preceding work with a view to extending and concluding certain experiments while exploring new avenues of investigation of defect control and reduction where appropriate. All work proposed was within the context of achieving an ODS Fe{sub 3}Al alloy of improved overall quality and potential creep performance (particularly) in the consolidated, release condition. The interim outturn of the experimental work performed is also reported.

Rasch-built Overall Disability Scale for patients with chemotherapy-induced peripheral neuropathy (CIPN-R-ODS).

Science.gov (United States)

Binda, D; Vanhoutte, E K; Cavaletti, G; Cornblath, D R; Postma, T J; Frigeni, B; Alberti, P; Bruna, J; Velasco, R; Argyriou, A A; Kalofonos, H P; Psimaras, D; Ricard, D; Pace, A; Galiè, E; Briani, C; Dalla Torre, C; Lalisang, R I; Boogerd, W; Brandsma, D; Koeppen, S; Hense, J; Storey, D; Kerrigan, S; Schenone, A; Fabbri, S; Rossi, E; Valsecchi, M G; Faber, C G; Merkies, I S J; Galimberti, S; Lanzani, F; Mattavelli, L; Piatti, M L; Bidoli, P; Cazzaniga, M; Cortinovis, D; Lucchetta, M; Campagnolo, M; Bakkers, M; Brouwer, B; Boogerd, W; Grant, R; Reni, L; Piras, B; Pessino, A; Padua, L; Granata, G; Leandri, M; Ghignotti, I; Plasmati, R; Pastorelli, F; Heimans, J J; Eurelings, M; Meijer, R J; Grisold, W; Lindeck Pozza, E; Mazzeo, A; Toscano, A; Russo, M; Tomasello, C; Altavilla, G; Penas Prado, M; Dominguez Gonzalez, C; Dorsey, S G

2013-09-01

Chemotherapy-induced peripheral neuropathy (CIPN) is a common neurological side-effect of cancer treatment and may lead to declines in patients' daily functioning and quality of life. To date, there are no modern clinimetrically well-evaluated outcome measures available to assess disability in CIPN patients. The objective of the study was to develop an interval-weighted scale to capture activity limitations and participation restrictions in CIPN patients using the Rasch methodology and to determine its validity and reliability properties. A preliminary Rasch-built Overall Disability Scale (pre-R-ODS) comprising 146 items was assessed twice (interval: 2-3 weeks; test-retest reliability) in 281 CIPN patients with a stable clinical condition. The obtained data were subjected to Rasch analyses to determine whether model expectations would be met, and if necessarily, adaptations were made to obtain proper model fit (internal validity). External validity was obtained by correlating the CIPN-R-ODS with the National Cancer Institute-Common Toxicity Criteria (NCI-CTC) neuropathy scales and the Pain-Intensity Numeric-Rating-Scale (PI-NRS). The preliminary R-ODS did not meet Rasch model's expectations. Items displaying misfit statistics, disordered thresholds, item bias or local dependency were systematically removed. The final CIPN-R-ODS consisting of 28 items fulfilled all the model's expectations with proper validity and reliability, and was unidimensional. The final CIPN-R-ODS is a Rasch-built disease-specific, interval measure suitable to detect disability in CIPN patients and bypasses the shortcomings of classical test theory ordinal-based measures. Its use is recommended in future clinical trials in CIPN. Copyright © 2013 Elsevier Ltd. All rights reserved.

Influence of the fabrication process parameters on microstructures and mechanical properties of 10Cr-1Mo ODS steel

International Nuclear Information System (INIS)

Jin, Hyun Ju; Kim, Ki Baik; Choi, Byoung Kwon; Kang, Suk Hoon; Noh, Sang Hoon; Kim, Ga Eon; Kim, Tae Kyu

2016-01-01

Oxide dispersion strengthened (ODS) FM steels have been developed as the most promising core structural material for high- temperature components operating in severe environments such as nuclear fusion and fission systems owing to its excellent elevated temperature strength and radiation resistance stemming from the addition of extremely thermally stable oxide particles dispersed in a ferritic/martensitic matrix. To realize the structural components such as plates, sheets and tubes in SFR, the development of manufacturing processes is an essential issue for the ODS FM steel. While the ODS steel has superior radiation resistance and high temperature strength, in comparison with the existing commercial steels, it is difficult for the ODS steel to obtain sufficient workability for the fabrication due to high hardness and low ductility at room temperature, meaning that the manufacturing of the ODS plate including cladding tube can be complicated by the low cold workability. In order to prevent the ODS steel from any damage during the manufacturing process, thus, the introduction of intermediate heat treatments between cold rolling processes is necessary. This study investigates effects of the fabrication process parameters such as the cold working ratio, the intermediate and final heat treatments on the microstructure and mechanical properties of 10Cr-1Mo ODS steel. In an effort to optimize the manufacturing route of the ODS FM steel, the microstructural and mechanical evolutions for the ODS plate manufactured by a control of the fabrication process parameters were evaluated in the present study. In the present study, the effect of a cold rolling and intermediate heat treatments on microstructures and mechanical properties of 10Cr-1Mo FM ODS steel were investigated. During the manufacturing route the hardness measurements remained below the critical value of 400 Hv. Intermediate heat treatment with slow cooling led to a softened ferritic structures which can be further

Ozone-depleting Substances (ODS)

Data.gov (United States)

U.S. Environmental Protection Agency — This site includes all of the ozone-depleting substances (ODS) recognized by the Montreal Protocol. The data include ozone depletion potentials (ODP), global warming...

The temperament and character traits in patients with major depressive disorder and bipolar affective disorder with and without suicide attempt.

Science.gov (United States)

Erić, Anamarija Petek; Erić, Ivan; Ćurković, Mario; Dodig-Ćurković, Katarina; Kralik, Kristina; Kovač, Vlatka; Filaković, Pavo

2017-06-01

Suicide and mood disorders (especially major depressive disorder (MDD) and bipolar affective disorder (BD)) represent a significant global health burden. Major depressive disorder and bipolar affective disorder have been associated with increased risk for suicide. Some specific suicide risk factors might be found in underlying individual personality traits. Specific personality features may predispose an individual to mood disorders (MDD or BD) hence increased suicide risk. The specificity of this research is in the assessment of personality features during the acute phase of illness immediately after suicide attempt which resulted in psychiatric inpatient treatment. The study included 119 unrelated Caucasian participants with MDD-severe depressive episode without psychotic symptoms (MDD) and BD-severe depressive episode without psychotic symptoms (BD-sDE). Both groups of patients with MDD and BD-sDE were divided into the suicide attempters and non-suicidal group. The diagnoses of the severe depressive episode without psychotic symptoms in major depressive disorder (MDD; F32.2) and bipolar disorder (BD-sDE; F31.4) were made according to ICD-10 (WHO 1992) diagnostic criteria. Methods of suicide attempts were also assessed according to ICD-10 and a self-report questionnaire, the Temperament and Character Inventory (TCI) was applied. The participants who exhibited suicide attempt had significantly higher scores on harm-avoidance (HA) (psuicidal attempt had significantly lower scores on self-directedness (SD) (psuicide attempt may have some significantly different personality traits than non-suicidal patients with mood disorders. The combination of high harm-avoidance (HA) and low self-directedness (SD) may be specific for depressive episode while the combination of high HA, novelty-seeking (NS), and self-transcendence (ST) with low SD may be related to suicide attempts during the depressive episode in bipolar disorder. The novelty-seeking (NS), self-transcendence (ST

The BGO-OD experiment. Status

Energy Technology Data Exchange (ETDEWEB)

Hannappel, Juergen [Physikalisches Institut der Universitaet Bonn (Germany); Collaboration: BGO-OD-Collaboration

2015-07-01

In the framework of an international collaboration a new detector is set up at the accelerator facility ELSA in Bonn, the BGO-OD experiment. It aims at systematic investigation of nonstrange and strange meson photoproduction, in particular t-channel processes at low momentum transfer. The setup uniquely combines a central almost 4π acceptance BGO crystal calorimeter with a large aperture forward magnetic spectrometer providing good detection of both neutral and charged particles, complementary to other setups like CB, LEPS or CLAS. An overview of the BGO-OD detector is presented. Preliminary data from the first data takings will be shown and discussed.

ODS-materials for high temperature applications in advanced nuclear systems

Directory of Open Access Journals (Sweden)

C.C. Eiselt

2016-12-01

Full Text Available A ferritic ODS-alloy (Fe-14Cr-1W-0.25Ti has been manufactured by application of the powder metallurgical production route involving at first mechanical alloying of ∼10kg pre-alloyed steel powder together with an Y2O3 addition for 12h in a high energy industrial ball mill under hydrogen atmosphere at the company ZOZ GmbH. As a next step, one part of the alloyed powder was hot extruded into rods while another portion was hot isostatically pressed into plates. Both materials were then heat treated. A characterization program on these ODS-alloy production forms included microstructural and mechanical investigations: SANS and TEM assume the existence of Y2Ti2O7 nano clusters and show a bimodal distribution of ODS-particle sizes in both ODS variants. EBSD maps showed a strong 〈110〉 texture corresponding to the α fiber for the hot extruded ODS and a slight 〈001〉 texture for the hipped ODS material. Fracture toughness tests in different specimen orientations (extruded ODS with mini 0.2T C(T specimens together with Charpy impact tests revealed anisotropic mechanical properties: Promising (fracture toughness levels were obtained in the specimen orientation perpendicular to the extrusion direction, while the toughness levels remained low in extrusion direction and generally for the hipped ODS material at all test temperatures. The fracture toughness tests were performed according to ASTM E 1921 and 1820 standards.

Birth order and post-traumatic stress disorder.

Science.gov (United States)

Green, Ben; Griffiths, Emily C

2014-01-01

To compare the birth order of patients with post-traumatic stress disorder (PTSD) and adjustment disorder (AD) with population norms. 83 PTSD patients and 104 AD control patients from a psychiatric trauma clinic were diagnosed according to DCR-10 guidelines. A family history was taken as to number of siblings, and their birth order. We compared the distribution of birth order for each patient group against birth order distributions expected by chance for the same years of birth using UK population-level birth order from the Office for National Statistics. Psychiatric patients with PTSD were more likely to be from a large family, specifically to be the fifth child or later (OR 4.78, p birth order between AD patients and the general population. People with PTSD are more likely to be the youngest children from large families than expected from a random sample of people born in the same years. This association with birth order was not found for another psychiatric diagnosis AD from the same clinic. We discuss possible psychosocial and biological causes, and implications for further research.

Disorder overtakes order in information concentration over quantum networks

International Nuclear Information System (INIS)

Prabhu, R.; Pradhan, Saurabh; Sen, Aditi; Sen, Ujjwal

2011-01-01

We consider different classes of quenched disordered quantum XY spin chains, including a quantum XY spin glass and a quantum XY model with a random transverse field, and investigate the behavior of genuine multiparty entanglement in the ground states of these models. We find that there are distinct ranges of the disorder parameter that give rise to a higher genuine multiparty entanglement than in the corresponding systems without disorder: an order-from-disorder phenomenon in genuine multiparty entanglement. Moreover, we show that such a disorder-induced advantage in the genuine multiparty entanglement is useful: It is almost certainly accompanied by a order-from-disorder phenomenon for a multiport quantum dense coding capacity with the same ground state used as a multiport quantum network.

Externally fired gas turbine cycles with high temperature heat exchangers utilising Fe-based ODS alloy tubing

International Nuclear Information System (INIS)

Olsson, F.; Svensson, S.-A.; Duncan, R.

2001-01-01

This work is part of the BRITE / EuRAM Project 'Development of Torsional Grain Structures to Improve Biaxial Creep Performance of Fe-based ODS Alloy Tubing for Biomass Power Plant'. The main goal of this project is to heat exchanger tubes working at 1100 o C and above. The paper deals with design implications of a biomass power plant, using an indirectly fired gas turbine with a high temperature heat exchanger containing Fe-based ODS alloy tubing. In the current heat exchanger design, ODS alloy tubing is used in a radiant section, using a bayonet type tube arrangement. This enables the use of straight sections of ODS tubing and reduces the amount of material required. In order to assess the potential of the power plant system, thermodynamic calculations have been conducted. Both co-generation and condensing applications are studied and results so far indicate that the electrical efficiency is high, compared to values reached by conventional steam cycle power plants of the same size (approx. 5 MW e ). (author)

Nanostructure evolution in ODS steels under ion irradiation

Directory of Open Access Journals (Sweden)

S. Rogozhkin

2016-12-01

In this work, we carried out atom probe tomography (APT and transmission electron microscopy (TEM studies of three different ODS steels produced by mechanical alloying: ODS Eurofer, 13.5Cr ODS and 13.5Cr-0.3Ti ODS. These materials were investigated after irradiation with Fe (5.6MeV or Ti (4.8MeV ions up to 1015ion/cm2 and part of them up to 3×1015ion/cm2. In all cases, areas for TEM investigation were cut at a depth of ∼ 1.3µm from the irradiated surface corresponding to the peak of the radiation damage dose. It was shown that after irradiation at RT and at 300°С the number density of oxide particles in all the samples grew up. Meanwhile, the fraction of small particles in the size distribution has increased. APT revealed an essential increase in nanoclusters number and a change of their chemical composition at the same depth. The nanostructure was the most stable in 13.5Cr-0.3Ti ODS irradiated at 300°С: the increase of the fraction of small oxides was minimal and no change of nanocluster chemical composition was detected.

Differences in temperament and character dimensions in adolescents with various conduct disorders

Directory of Open Access Journals (Sweden)

Dukanac Vesna

2016-01-01

Full Text Available Background/Aim. Adolescence is characterized both by a large developmental potential and by an increased risk for emergence of different forms of psychopathology. International classifications of mental disorders recognize the psychopathology of adolescence at the age of 15−18 through the categories of conduct disorders and some forms of addiction: chemical and non-chemical. The aim of this research was to analyse the personality structure among four groups of adolescents manifesting different types of conduct disorder based on Cloninger’s Psychobiological theory of personality. Methods. The research sample consisted of 140 respondents at the age of 16−18, divided into five groups: 30 respondents manifesting socialized conduct disorder, 20 adolescents in conflict with the law, 30 respondents manifesting abuse of psychoactive substances, 30 respondents with the problem of the Internet addiction and 30 from general population. The Belgrade Adolescent Personality Inventory (BAPI questionnaire was used for the purpose of assessment of personality. Multivariate analysis of variance (MANOVA, followed by univariate analysis of variance (ANOVA was used to examine differences between the given groups of adolescents. Results. The results of MANOVA show differences in the personality structure among the groups, both in the dimensions of temperament, F (20,418.84 = 2.71, p < 0.001, Wilks’s lambda 0.67, and in the dimensions of character, F (12,344.24 = 3.27, p < 0.001, Wilks’s lambda is 0.75. Socialized conduct disorder is characterized by low selfdirectedness and average cooperativeness. Adolescents in conflict with the law have the lowest persistence, together with low self-directedness and cooperativeness. Adolescents abusing psychoactive substances have low harm avoidance and self-transcendence. Adolescents with Internet addiction are characterized by high novelty seeking (impulsivity and curiosity, low self-directedness and the lowest

The evolution of internal stress and dislocation during tensile deformation in a 9Cr ferritic/martensitic (F/M) ODS steel investigated by high-energy X-rays

Energy Technology Data Exchange (ETDEWEB)

Zhang, Guangming; Zhou, Zhangjian; Mo, Kun; Miao, Yinbin; Liu, Xiang; Almer, Jonathan; Stubbins, James F.

2015-12-01

An application of high-energy wide angle synchrotron X-ray diffraction to investigate the tensile deformation of 9Cr ferritic/martensitic (F/M) ODS steel is presented. With tensile loading and in-situ Xray exposure, the lattice strain development of matrix was determined. The lattice strain was found to decrease with increasing temperature, and the difference in Young's modulus of six different reflections at different temperatures reveals the temperature dependence of elastic anisotropy. The mean internal stress was calculated and compared with the applied stress, showing that the strengthening factor increased with increasing temperature, indicating that the oxide nanoparticles have a good strengthening impact at high temperature. The dislocation density and character were also measured during tensile deformation. The dislocation density decreased with increasing of temperature due to the greater mobility of dislocation at high temperature. The dislocation character was determined by best-fit methods for different dislocation average contrasts with various levels of uncertainty. The results shows edge type dislocations dominate the plastic strain at room temperature (RT) and 300 C, while the screw type dislocations dominate at 600 C. The dominance of edge character in 9Cr F/M ODS steels at RT and 300 C is likely due to the pinning effect of nanoparticles for higher mobile edge dislocations when compared with screw dislocations, while the stronger screw type of dislocation structure at 600 C may be explained by the activated cross slip of screw segments.

Character evaluation of strength in dispersion strengthened ferritic steel. 5

International Nuclear Information System (INIS)

Yoshida, Fuyuki; Nakashima, Hideharu

1997-03-01

In order to clarify the high-temperature deformation behaviour and the origin of threshold stress of ODS martensite steel with Y 2 O 3 particles, the stress-strain curves were measured by compression test at 600 to 700degC and at strain rates from 2x10 -5 to 2x10 -3 s -1 , and the threshold stress was measured by stress abruptly loading test (SAL test) at 650degC. Further, the possibility of temperature dependence of threshold stress was discussed by estimating the activation energy for dislocations to detach the Y 2 O 3 particles. The results are summarized as follows. 1) The stress exponents of ODS martensite steel were 22-35. And the activation energy of high-temperature deformation was 742 kJ/mol. Those deformation behaviour of ODS martensite steel agrees with the deformation behaviour of ODS ferritic steel. 2) The Orowan stress and the void-hardening stress calculated from dispersion parameters approximately agreed with the threshold stress obtained by SAL test. It is concluded that the originating mechanism of the threshold stress in ODS martensite steel is the Srolovitz's one. 3) The calculated activation energy for a dislocation to detach the particles was very high compared to the thermal energy. Therefor, the threshold stress is almost independent of temperature. (author)

Development of ODS (oxide dispersion strengthened) ferritic-martensitic steels for fast reactor fuel cladding

International Nuclear Information System (INIS)

Ukai, Shigeharu

2000-01-01

In order to attain higher burnup and higher coolant outlet temperature in fast reactor, oxide dispersion strengthened (ODS) ferritic-martensitic steels were developed as a long life fuel cladding. The improvement in formability and ductility, which are indispensable in the cold-rolling method for manufacturing cladding tube, were achieved by controlling the microstructure using techniques such as recrystallization heat-treatment and α to γ phase transformation. The ODS ferritic-martensitic cladding tubes manufactured using these techniques have the highest internal creep rupture strength in the world as ferritic stainless steels. Strength level approaches adequate value at 700degC, which meets the requirement for commercial fast reactors. (author)

The effect of organisational context on organisational development (OD) interventions

OpenAIRE

Sanjana Brijball Parumasur

2012-01-01

Orientation: Systematic and congruent organisational structures, systems, strategies and designs are necessary for the successful implementation of organisational development (OD) interventions. Research purpose: This article examines national and international OD practices. It assesses the effect of diverse cultures and cultural values for determining the effectiveness of OD interventions. Motivation for the study: Most organisational change and development programmes fail and only a ...

Relaxation processes in a lower disorder order transition diblock copolymer

International Nuclear Information System (INIS)

Sanz, Alejandro; Ezquerra, Tiberio A.; Nogales, Aurora; Hernández, Rebeca; Sprung, Michael

2015-01-01

The dynamics of lower disorder-order temperature diblock copolymer leading to phase separation has been observed by X ray photon correlation spectroscopy. Two different modes have been characterized. A non-diffusive mode appears at temperatures below the disorder to order transition, which can be associated to compositional fluctuations, that becomes slower as the interaction parameter increases, in a similar way to the one observed for diblock copolymers exhibiting phase separation upon cooling. At temperatures above the disorder to order transition T ODT , the dynamics becomes diffusive, indicating that after phase separation in Lower Disorder-Order Transition (LDOT) diblock copolymers, the diffusion of chain segments across the interface is the governing dynamics. As the segregation is stronger, the diffusive process becomes slower. Both observed modes have been predicted by the theory describing upper order-disorder transition systems, assuming incompressibility. However, the present results indicate that the existence of these two modes is more universal as they are present also in compressible diblock copolymers exhibiting a lower disorder-order transition. No such a theory describing the dynamics in LDOT block copolymers is available, and these experimental results may offer some hints to understanding the dynamics in these systems. The dynamics has also been studied in the ordered state, and for the present system, the non-diffusive mode disappears and only a diffusive mode is observed. This mode is related to the transport of segment in the interphase, due to the weak segregation on this system

Investigating the mediating role of attachment styles in explaining the relationship between temperament, character dimensions and somatization disorders among female teachers in Kermanshah

Directory of Open Access Journals (Sweden)

Jahangir Karami

2017-09-01

Conclusion: Temperament and character dimensions of personality result in somatization disorder when the insecure internal models which are set according to the framework of mother-neonate attachment relationships had been formed.

46 CFR 280.3 - Standards governing award of an ODS agreement.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Standards governing award of an ODS agreement. 280.3 Section 280.3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGULATIONS AFFECTING... LINER OPERATORS § 280.3 Standards governing award of an ODS agreement. No ODS agreement, including any...

Evaluation of oxide dispersion strengthened (ODS) molybdenum and molybdenum-rhenium alloys

International Nuclear Information System (INIS)

Mueller, A.J.; Bianco, R.; Buckman, R.W. Jr.

1999-01-01

Oxide dispersion strengthened (ODS) molybdenum alloys being developed for high temperature applications possess excellent high temperature strength and creep resistance. In addition they exhibit a ductile-to-brittle transition temperature (DBIT) in the worked and stress-relieved condition under longitudinal tensile load well below room temperature. However, in the recrystallized condition, the DBTT maybe near or above room temperature, depending on the volume fraction of oxide dispersion and the amount of prior work. Dilute rhenium additions (7 and 14 wt.%) to ODS molybdenum were evaluated to determine their effect on low temperature ductility. The addition of 7 wt.% rhenium to the ODS molybdenum did not significantly enhance the mechanical properties. However, the addition of 14 wt.% rhenium to the ODS molybdenum resulted in a DBTT well below room temperature in both the stress-relieved and recrystallized condition. Additionally, the tensile strength of ODS Mo-14Re is greater than the base ODS molybdenum at 1,000 to 1,250 C

The Effect of Realistic Appearance of Virtual Characters in Immersive Environments - Does the Character's Personality Play a Role?

Science.gov (United States)

Zibrek, Katja; Kokkinara, Elena; Mcdonnell, Rachel

2018-04-01

Virtual characters that appear almost photo-realistic have been shown to induce negative responses from viewers in traditional media, such as film and video games. This effect, described as the uncanny valley, is the reason why realism is often avoided when the aim is to create an appealing virtual character. In Virtual Reality, there have been few attempts to investigate this phenomenon and the implications of rendering virtual characters with high levels of realism on user enjoyment. In this paper, we conducted a large-scale experiment on over one thousand members of the public in order to gather information on how virtual characters are perceived in interactive virtual reality games. We were particularly interested in whether different render styles (realistic, cartoon, etc.) would directly influence appeal, or if a character's personality was the most important indicator of appeal. We used a number of perceptual metrics such as subjective ratings, proximity, and attribution bias in order to test our hypothesis. Our main result shows that affinity towards virtual characters is a complex interaction between the character's appearance and personality, and that realism is in fact a positive choice for virtual characters in virtual reality.

OD Matrix Acquisition Based on Mobile Phone Positioning Data

Directory of Open Access Journals (Sweden)

Xiaoqing ZUO

2014-06-01

Full Text Available Dynamic OD matrix is basic data of traffic travel guidance, traffic control, traffic management and traffic planning, and reflects the basic needs of travelers on the traffic network. With the rising popularity of positioning technology and the communication technology and the generation of huge mobile phone users, the mining and use of mobile phone positioning data, can get more traffic intersections and import and export data. These data will be integrated into obtaining the regional OD matrix, which is bound to bring convenience. In this article, mobile phone positioning data used in the data acquisition of intelligent transportation system, research a kind of regional dynamic OD matrix acquisition method based on the mobile phone positioning data. The method based on purpose of transportation, using time series similarity classification algorithm based on piecewise linear representation of the corner point (CP-PLR, mapping each base station cell to traffic zone of different traffic characteristics, and through a series of mapping optimization of base station cell to traffic zone to realize city traffic zone division based on mobile phone traffic data, on the basis, adjacency matrix chosen as the physical data structure of OD matrix storage, the principle of obtaining regional dynamic OD matrix based on the mobile phone positioning data are expounded, and the algorithm of obtaining regional dynamic OD matrix based on mobile phone positioning data are designed and verified.

Friction Stir Processing of ODS and FM Steels

Energy Technology Data Exchange (ETDEWEB)

Kang, Suk Hoon; Chun, Young Bum; Noh, Sang Hoon; Jang, Jin Sung; Kim, Tae Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

In ODS steels, it is well known that uniform nano-oxide dispersoids act as pinning points to obstruct dislocation and grain boundary motion, however, those advantages will be disappeared while the material is subjected to the high temperature of conventional fusion welding. Rotary friction welding, also referred to as friction stir welding (FSW), has shown great promise as a method for welding traditionally difficult to weld materials such as aluminum alloys. This relatively new technology has more recently been applied to higher melting temperature alloys such as steels, nickel-based and titanium alloys. Friction stir processing (FSP) is a method of changing the properties of a metal through intense, localized plastic deformation. FSW is the precursor of the FSP technique. When ideally implemented, this process mixes the material without changing the phase and creates a microstructure with fine, equiaxed grains. This homogeneous grain structure, separated by high-angle boundaries, allows some alloys to take on superplastic properties. In this study, FSW is used as a substitutive welding process between FMS tube and ODS parts. The dimension of tube is 7.0 OD, 0.5 T. During the FSW, dynamic-recrystallized grains are developed; the uniform oxides dispersion is preserved in the metal matrix. The microstructure and microtexture of the material near the stir zone is found to be influenced by the rotational behavior of the tool. The additive effect from FSP on sample surface is considered. Since the mechanical alloying (MA) and FSP commonly apply extreme shear deformation on materials, the dispersion of oxide particle in ODS steels is very active during both processes. Friction stir welding appears to be a very promising technique for the welding of FMS and ODS steels in the form of sheet and tube. FSW could successfully produce defect-free welds on FMS tubes and ODS ring assembly. FSW produces a fine grain structure consisting of ferrite and martensite, and the oxide

Friction Stir Processing of ODS and FM Steels

International Nuclear Information System (INIS)

Kang, Suk Hoon; Chun, Young Bum; Noh, Sang Hoon; Jang, Jin Sung; Kim, Tae Kyu

2013-01-01

In ODS steels, it is well known that uniform nano-oxide dispersoids act as pinning points to obstruct dislocation and grain boundary motion, however, those advantages will be disappeared while the material is subjected to the high temperature of conventional fusion welding. Rotary friction welding, also referred to as friction stir welding (FSW), has shown great promise as a method for welding traditionally difficult to weld materials such as aluminum alloys. This relatively new technology has more recently been applied to higher melting temperature alloys such as steels, nickel-based and titanium alloys. Friction stir processing (FSP) is a method of changing the properties of a metal through intense, localized plastic deformation. FSW is the precursor of the FSP technique. When ideally implemented, this process mixes the material without changing the phase and creates a microstructure with fine, equiaxed grains. This homogeneous grain structure, separated by high-angle boundaries, allows some alloys to take on superplastic properties. In this study, FSW is used as a substitutive welding process between FMS tube and ODS parts. The dimension of tube is 7.0 OD, 0.5 T. During the FSW, dynamic-recrystallized grains are developed; the uniform oxides dispersion is preserved in the metal matrix. The microstructure and microtexture of the material near the stir zone is found to be influenced by the rotational behavior of the tool. The additive effect from FSP on sample surface is considered. Since the mechanical alloying (MA) and FSP commonly apply extreme shear deformation on materials, the dispersion of oxide particle in ODS steels is very active during both processes. Friction stir welding appears to be a very promising technique for the welding of FMS and ODS steels in the form of sheet and tube. FSW could successfully produce defect-free welds on FMS tubes and ODS ring assembly. FSW produces a fine grain structure consisting of ferrite and martensite, and the oxide

Modification of the Strength Anisotropy in an Austenitic ODS Steel

International Nuclear Information System (INIS)

Kim, T. K.; Jang, J.; Kim, S. H.; Lee, C. B.; Bae, C. S.; Kim, D. H.

2007-01-01

Among many candidate alloys for Gen IV reactors, the oxide dispersion strengthened (ODS) alloy is widely considered as a good candidate material for the in-reactor component, like cladding tube. The ODS alloy is well known due to its good high temperature strength, and excellent irradiation resistance. For the previous two decades in the nuclear community, the ODS alloy developments have been mostly focused on the ferritic martensitic (F-M) steel-based ones. On the other hand, the austenitic stainless steels (e.g. 316L or 316LN) have been used as a structural material due to its good high temperature strength and a good compatibility with a media. However, the austenitic stainless steel showed unfavorable characteristics in the dimensional stability under neutron irradiation and cracking behavior with the media. It is thus expected that the austenitic ODS steels restrain the dimension stability under neutron irradiation. However, the ODS alloys usually reveal the anisotropic characteristic in mechanical strength in the hoop and longitudinal directions, which is attributed to the grain morphology strongly developed parallel to the rolling direction with a high aspect ratio. This study focuses on a modification of the strength anisotropy of an austenitic ODS alloy by a recrystallization heat treatment

Zaburzenia odżywiania – dylematy diagnozy

Directory of Open Access Journals (Sweden)

Maciej Wojciech Pilecki

2014-06-01

Full Text Available Celem badania było przedstawienie dylematów dotyczących diagnozy zaburzeń odżywiania się na przykładzie alternatywnego do kryteriów klinicznych podziału grupy dziewcząt z rozpoznaniem tych zaburzeń, uwzględniającego wyniki kwestionariuszy samooceny. Badaniem objęto 116 dziewcząt z rozpoznaniem któregoś z zaburzeń odżywiania się według DSM-IV, konsultowanych po raz pierwszy w latach 2002–2004 w ambulatorium Oddziału Klinicznego Psychiatrii Dzieci i Młodzieży Szpitala Uniwersyteckiego w Krakowie. Z uwagi na ograniczenia statystyczne modelu jedynie zmienne zależne, takie jak: samoocena obecności objawów depresyjnych (Kwestionariusz Depresji Becka, BDI, samoocena obecności problemów z odżywianiem się (Kwestionariusz Postaw wobec Odżywiania, EAT26, obraz siebie (Ja Społeczne Kwestionariusza Obrazu Siebie Offera, JaSpoł QSIA i relacje rodzinne (skala Intymności Skali Rodziny Pochodzenia, INT FOS, zostały poddane analizie skupień metodą k-średnich. Przeprowadzone analizy doprowadziły do wyłonienia pięciu skupień niepokrywających się z podziałem na poszczególne diagnozy kliniczne. Wszystkie skupienia różnią się wynikami tworzących je skal kwestionariuszowych. Pierwsze skupienie okazało się charakteryzować osoby o niskim w swojej ocenie nasileniu występowania problemów z odżywianiem się i depresyjności oraz korzystnym obrazie swojego funkcjonowania społecznego i relacji rodzinnych. Zależność obserwowana w skupieniu 5. była odwrotna. Przeważająca liczba pacjentek w skupieniu 1. miała rozpoznaną anoreksję restrykcyjną, a w skupieniu 5. bulimię. Najbardziej odmienne od pozostałych okazało się skupienie 3. Pozytywnemu obrazowi siebie, relacji rodzinnych w badanych obszarach towarzyszyło duże nasilenie występowania problemów z odżywianiem się i niskie depresyjności w samoocenie. Otrzymane wyniki wskazują, iż podział kliniczny zaburzeń odżywania się proponowany w ICD i

Effects of manufacturing process on impact properties and microstructures of ODS steels

Energy Technology Data Exchange (ETDEWEB)

Tanno, Takashi, E-mail: tanno.takashi@jaea.go.jp; Ohtsuka, Satoshi; Yano, Yasuhide; Kaito, Takeji; Tanaka, Kenya

2014-12-15

Oxide dispersion strengthened (ODS) steels are notable advanced alloys with durability to a high-temperature and high-dose neutron irradiation environment because of their good swelling resistance and mechanical properties under neutron irradiation. 9–12Cr-ODS martensite steels have been developed in the Japan Atomic Energy Agency as the primary candidate material for the fast reactor fuel cladding tubes. They would also be good candidates for the fusion reactor blanket material which is exposed to high-dose neutron irradiation. In this work, modification of the manufacturing process of 11Cr-ODS steel was carried out to improve its impact property. Two types of 11Cr-ODS steels were manufactured: pre-mix and full pre-alloy ODS steels. Miniature Charpy impact tests and metallurgical observations were carried out on these steels. The impact properties of full pre-alloy ODS steels were shown to be superior to those of pre-mix ODS steels. It was demonstrated that the full pre-alloy process noticeably improved the microstructure homogeneity (i.e. reduction of inclusions and pores)

Effects of Zr Addition on Strengthening Mechanisms of Al-Alloyed High-Cr ODS Steels.

Science.gov (United States)

Ren, Jian; Yu, Liming; Liu, Yongchang; Liu, Chenxi; Li, Huijun; Wu, Jiefeng

2018-01-12

Oxide dispersion strengthened (ODS) steels with different contents of zirconium (denoted as 16Cr ODS, 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS) were fabricated to investigate the effects of Zr on strengthening mechanism of Al-alloyed 16Cr ODS steel. Electron backscatter diffraction (EBSD) results show that the mean grain size of ODS steels could be decreased by Zr addition. Transmission electron microscope (TEM) results indicate that Zr addition could increase the number density but decrease the mean diameter and inter-particle spacing of oxide particles. Furthermore, it is also found that in addition to Y-Al-O nanoparticles, Y-Zr-O oxides with finer size were observed in 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS steels. These changes in microstructure significantly increase the yield strength (YS) and ultimate tensile strength (UTS) of ODS steels through mechanisms of grain boundary strengthening and dispersion strengthening.

Torsional energy levels of CH3OH+/CH3OD+/CD3OD+ studied by zero-kinetic energy photoelectron spectroscopy and theoretical calculations

International Nuclear Information System (INIS)

Dai, Zuyang; Gao, Shuming; Wang, Jia; Mo, Yuxiang

2014-01-01

The torsional energy levels of CH 3 OH + , CH 3 OD + , and CD 3 OD + have been determined for the first time using one-photon zero kinetic energy photoelectron spectroscopy. The adiabatic ionization energies for CH 3 OH, CH 3 OD, and CD 3 OD are determined as 10.8396, 10.8455, and 10.8732 eV with uncertainties of 0.0005 eV, respectively. Theoretical calculations have also been performed to obtain the torsional energy levels for the three isotopologues using a one-dimensional model with approximate zero-point energy corrections of the torsional potential energy curves. The calculated values are in good agreement with the experimental data. The barrier height of the torsional potential energy without zero-point energy correction was calculated as 157 cm −1 , which is about half of that of the neutral (340 cm −1 ). The calculations showed that the cation has eclipsed conformation at the energy minimum and staggered one at the saddle point, which is the opposite of what is observed in the neutral molecule. The fundamental C–O stretch vibrational energy level for CD 3 OD + has also been determined. The energy levels for the combinational excitation of the torsional vibration and the fundamental C–O stretch vibration indicate a strong torsion-vibration coupling

Microstructural stability of 11Cr ODS steel

Energy Technology Data Exchange (ETDEWEB)

Yamashiro, Tetsuya, E-mail: fgsjkr@eng.hokudai.ac.jp [Materials Science and Engineering, Graduate School of Engineering, Hokkaido University, N13, W-8, Kita-ku, Sapporo 060-8628 (Japan); Ukai, Shigeharu; Oono, Naoko [Materials Science and Engineering, Faculty of Engineering, Hokkaido University, N13, W-8, Kita-ku, Sapporo 060-8628 (Japan); Ohtsuka, Satoshi; Kaito, Takeji [Advanced Nuclear System R& D Directorate, Japan Atomic Energy Agency (JAEA), 4002, Narita, Oarai, Ibaraki-pref. 311-1393 (Japan)

2016-04-15

Aiming at further improvement of high-temperature oxidation and corrosion resistance, 11CrODS steel with martensitic base structure has been previously developed, as a candidate fuel cladding material for 4th generation advanced nuclear reactors. In this study, the microstructure of 11CrODS steel was characterized by means of EBSD and nanoindentation hardness measurement. The continuous cooling transformation (CCT) diagram was constructed. Upper critical cooling rate, which is minimum cooling rate necessary to form martensitic structure, was derived to be 60 °C/min (3600 °C/h). In contrast, lower critical cooling rate preventing from martensite formation, was derived to be 10 °C/min (600 °C/h). An area fraction of so called residual ferrite was estimated by image processing of EBSD-IQ map to be 21% of the total area. This fraction of the residual ferrite in 11CrODS steel was evaluated by considering the driving force for α to γ reverse transformation.

75 FR 9232 - Office of Dietary Supplements (ODS) 2010-2014 Strategic Plan

Science.gov (United States)

2010-03-01

... completed a strategic planning process resulting in the development of the ODS Strategic Plan for 2010-2014, entitled Strengthening Knowledge and Understanding of Dietary Supplements. The strategic plan is available... Supplements (ODS) 2010-2014 Strategic Plan ACTION: Notice of availability of the ODS Strategic Plan for 2010...

Zircaloy cladding ID/OD oxidation studies. Final report

International Nuclear Information System (INIS)

Westerman, R.E.; Hesson, G.M.

1977-11-01

The ID/OD oxide ratio that forms on Zircaloy tubing at temperatures relevant to postulated LOCA conditions was measured as a function of time, temperature, and distance from the rupture. The average ratio at the rupture position was less than unity, and decreased with decreasing test time and increasing distance from the point of rupture. The maximum observed ID/OD oxide ratio was 1.4. Ratios in excess of unity were typically found to be a consequence of the OD oxide being thinner than would have been anticipated from the nominal test conditions. Confirmatory data were also obtained on the isothermal oxidation kinetics of Zircaloy. These data are in good agreement with those obtained by other investigators and confirm the conservative nature of the Baker-Just equation that is required for use in licensing calculations

Internal Delorme's Procedure for Treating ODS Associated With Impaired Anal Continence.

Science.gov (United States)

Liu, Weicheng; Sturiale, Alessandro; Fabiani, Bernardina; Giani, Iacopo; Menconi, Claudia; Naldini, Gabriele

2017-12-01

The aim of this study was to evaluate the medium-term outcomes of internal Delorme's procedure for treating obstructed defecation syndrome (ODS) patients with impaired anal continence. In a retrospective study, 41 ODS patients who underwent internal Delorme's procedure between 2011 and 2015 were divided into 3 subgroups according to their associated symptoms of impaired continence, as urgency, passive fecal incontinence and both, before study. Then the patients' preoperative statuses, perioperative complications, and postoperative outcomes were investigated and collected from standardized questionnaires, including Altomare ODS score, Fecal Incontinence Severity Index (FISI), Patient Assessment of Constipation-Quality of Life Questionnaire (PAC-QoL), and Fecal Incontinence Quality of Life Scale (FIQLS). All results with a 2-tailed P ODS score, FISI, PAC-QoL, and FIQLS in all patients when comparing scores from before the operation with those at the final follow-up. Similar results were also observed in both the urgency subgroup and passive fecal incontinence subgroup, but there were no statistically significant improvements ( P > .05) in Altomare ODS score, FISI, PAC-QoL, or FIQLS in the urgency and passive fecal incontinence subgroups. Anorectal manometry showed the mean value of anal resting pressure increased 20%. Additionally, no major complications occurred. Internal Delorme's procedure is effective without major morbidity for treating ODS associated with urgency or passive fecal incontinence, but it may be less effective for treating ODS associated with both urgency and passive fecal incontinence.

The crystal structure of vurroite, Pb20Sn2(Bi,As)(22)S51Cl6

DEFF Research Database (Denmark)

Pinto, Daniela; Bonaccorsi, Elena; Balic Zunic, Tonci

2008-01-01

The crystal structure of the type specimen of vurroite from Vulcano (Aeolian Islands, Italy) has been solved and refined using single-crystal X-ray diffraction data collected at the Elettra synchrotron facility (Basovizza, Trieste). Vurroite has an OD (order-disorder) structure belonging to the c......The crystal structure of the type specimen of vurroite from Vulcano (Aeolian Islands, Italy) has been solved and refined using single-crystal X-ray diffraction data collected at the Elettra synchrotron facility (Basovizza, Trieste). Vurroite has an OD (order-disorder) structure belonging...... to the category III of OD structures composed of equivalent layers. The OD-groupoid family (lambda and sigma partial operations) and MDO structures were derived by means of the application of the OD theory. The two theoretically possible polytypes with maximum degree of order (MDO polytypes) have pseudo...

Microstructure and mechanical properties of friction stir welded 9Cr ODS steel

International Nuclear Information System (INIS)

Min, Hyoung Kee; Kang, Suk Hoon; Noh, Sanghoon; Lee, Jung Gu; Jang, Jinsung; Kim, Tae Kyu

2013-01-01

It is well known that the welding of ODS steel with a conventional melting.solidification process is not adequate to reserve nano-oxide particles in the matrix homogeneously. To reserve nano-oxide particles in the matrix homogeneously, friction stir welding (FSW) is the most promising technique to join ODS alloys. In this study, the effects of FSW on the microstructure and mechanical properties of a ODS steel were studied to apply the FSW process to 9Cr ODS steels. Microstructures were observed by means of optical microscopy, electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). A tensile test and hardness test were carried out to the investigate mechanical properties. FSW could successfully produce defect-free welds on ODS plates. FSW produced a fine grain structure consisting of ferrite and martensite. Tensile strengths and elongations of the SZs were excellent at 298 K, compared to those of the BM. This study suggests that FSW might be an appropriate welding method of ODS steels. Oxide dispersion strengthened (ODS) ferritic-martensitic (FM) steel containing 9 wt%Cr is a promising candidate material for high temperature components operating in aggressive environments such as nuclear fusion and fission systems because of the excellent elevated temperature strength, corrosion and radiation resistance. These characteristics come from microstructures consisting of fine grains and nano-oxide particles dispersed in high number density. However, for more applications of ODS steel in nuclear systems, its weldability is the one of the barrier to be solved

Reduction in Defect Content of ODS Alloys

Energy Technology Data Exchange (ETDEWEB)

Ritherdon, J

2001-05-15

The work detailed within this report is a continuation of earlier work carried out under contract number 1DX-SY382V. The earlier work comprises a literature review of the sources and types of defects found principally in Fe-based ODS alloys as well as experimental work designed to identify defects in the prototype ODS-Fe{sub 3}Al alloy, deduce their origins and to recommend methods of defect reduction. The present work is an extension of the experimental work already reported and concentrates on means of reduction of defects already identified rather than the search for new defect types. This report also includes results gathered during powder separation trials, conducted by the University of Groningen, Netherlands and coordinated by the University of Liverpool, involving the separation of different metallic powders in terms of their differing densities. The scope and objectives of the present work were laid out in the technical proposal ''Reduction in Defect Content in ODS Alloys-III''. All the work proposed in the ''Statement of Work'' section of the technical proposal has been carried out and all work extra to the ''Statement of Work'' falls within the context of an ODS-Fe{sub 3}Al alloy of improved overall quality and potential creep performance in the consolidated form. The outturn of the experimental work performed is reported in the following sections.

Creep constitutive equation of dual phase 9Cr-ODS steel

International Nuclear Information System (INIS)

Sakasegawa, Hideo; Ukai, Shigeharu; Tamura, Manabu; Ohtsuka, Satoshi; Tanigawa, Hiroyasu; Ogiwara, Hiroyuki; Kohyama, Akira; Fujiwara, Masayuki

2008-01-01

9Cr-ODS (oxide dispersion strengthened) steels developed by JAEA (Japan Atomic Energy Agency) have superior creep properties compared with conventional heat resistant steels. The ODS steels can enormously contribute to practical applications of fast breeder reactors and more attractive fusion reactors. Key issues are developments of material processing procedures for mass production and creep life prediction methods in present R and D. In this study, formulation of creep constitutive equation was performed against the backdrop. The 9Cr-ODS steel displaying an excellent creep property is a dual phase steel. The ODS steel is strengthened by the δ ferrite which has a finer dispersion of oxide particles and shows a higher hardness than the α' martensite. The δ ferrite functions as a reinforcement in the dual phase 9Cr-ODS steel. Its creep behavior is very unique and cannot be interpreted by conventional theories of heat resistant steels. Alternative qualitative model of creep mechanism was formulated at the start of this study using the results of microstructural observations. Based on the alternative creep mechanism model, a novel creep constitutive equation was formulated using the exponential type creep equation extended by a law of mixture

High resolution SEM characterization of nano-precipitates in ODS steels.

Science.gov (United States)

Jóźwik, Iwona; Strojny-Nędza, Agata; Chmielewski, Marcin; Pietrzak, Katarzyna; Kurpaska, Łukasz; Nosewicz, Szymon

2018-05-01

The performance of the present-day scanning electron microscopy (SEM) extends far beyond delivering electronic images of the surface topography. Oxide dispersion strengthened (ODS) steel is on of the most promising materials for the future nuclear fusion reactor because of its good radiation resistance, and higher operation temperature up to 750°C. The microstructure of ODS should not exceed tens of nm, therefore there is a strong need in a fast and reliable technique for their characterization. In this work, the results of low-kV SEM characterization of nanoprecipitates formed in the ODS matrix are presented. Application of highly sensitive photo-diode BSE detector in SEM imaging allowed for the registration of single nm-sized precipitates in the vicinity of the ODS alloys. The composition of the precipitates has been confirmed by TEM-EDS. © 2018 Wiley Periodicals, Inc.

Ion implantation-induced defects in Oxide Dispersion Strengthened (ODS) steel probed by positron annihilation spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Anwand, Wolfgang; Butterling, Maik; Brauer, Gerhard; Wagner, Andreas [HZDR, Institut fuer Strahlenphysik (Germany); Richter, Astrid [Technische Hochschule Wildau (Germany); Koegler, Reinhard [HZDR, Institut fuer Ionenstrahlphysik und Materialforschung (Germany); Chen, C.L. [I-Shou University, Kaohsiung (China)

2012-07-01

ODS steel is a promising candidate for an application in fission and fusion power plants of a new generation because of its advantageous properties as stability and temperature resistance. A microscopic understanding of the physical reasons of the mechanical and thermal properties as well as the behaviour of the material under irradiation is an important pre-condition for such applications. The investigated ODS FeCrAl alloy *PM2000* has been produced in a powder metallurgical way. Neutron-induced damage at ODS steel was simulated by He{sup +} and Fe{sup 2+} co-implantation with energies of 2.5 MeV and 400 keV, respectively, and different fluences. The implantation has been carried out with a dual ion beam which enables a simultaneous implantation of both ion types. Thereby the Fe{sup 2+} implantation was used for the creation of radiation defects, and He{sup +} was implanted in order to reproduce He bubbles as they are expected to appear by neutron irradiation. The implantation-induced damage was investigated by depth dependent Doppler broadening measurements using a variable energy slow positron beam.

Molecular dynamics simulation of the rotational order-disorder phase transition in calcite

International Nuclear Information System (INIS)

Kawano, Jun; Miyake, Akira; Shimobayashi, Norimasa; Kitamura, Masao

2009-01-01

Molecular dynamics (MD) simulation of calcite was carried out with the interatomic potential model based on ab initio calculations to elucidate the phase relations for calcite polymorphs and the mechanism of the rotational order-disorder transition of calcite at high temperature at the atomic scale. From runs of MD calculations with increasing temperature within a pressure range of 1 atm and 2 GPa, the transition of calcite with R3-barc symmetry into a high-temperature phase with R3-barm symmetry was reproduced. In the high-temperature R3-barm phase, CO 3 groups vibrate with large amplitudes either around the original positions in the R3-barc structure or around other positions rotated ± 60 deg., and their positions change continuously with time. Moreover, contrary to the suggestion of previous investigators, the motion of CO 3 groups is not two-dimensional. At 1 atm, the transition between R3-barc and R3-barm is first order in character. Upon increasing temperature at high pressure, however, first a first-order isosymmetric phase transition between the R3-barc phases occurs, which corresponds to the start of ± 120 deg. flipping of CO 3 groups. Then, at higher temperatures, the transition of R3-barc to R3-barm phases happens, which can be considered second order. This set of two types of transitions at elevated pressure can be characterized by the appearance of an 'intermediate' R3-barc phase between the stable region of calcite and the high-temperature R3-barm phase, which may correspond to the CaCO 3 -IV phase.

Development of Oxide Dispersion Strengthened (ODS) Ferritic Steel Through Powder Forging

Science.gov (United States)

Kumar, Deepak; Prakash, Ujjwal; Dabhade, Vikram V.; Laha, K.; Sakthivel, T.

2017-04-01

Oxide dispersion strengthened (ODS) ferritic steels are candidates for cladding tubes in fast breeder nuclear reactors. In this study, an 18%Cr ODS ferritic steel was prepared through powder forging route. Elemental powders with a nominal composition of Fe-18Cr-2 W-0.2Ti (composition in wt.%) with 0 and 0.35% yttria were prepared by mechanical alloying in a Simoloyer attritor under argon atmosphere. The alloyed powders were heated in a mild steel can to 1473 K under flowing hydrogen atmosphere. The can was then hot forged. Steps of sealing, degassing and evacuation are eliminated by using powder forging. Heating ODS powder in hydrogen atmosphere ensures good bonding between alloy powders. A dense ODS alloy with an attractive combination of strength and ductility was obtained after re-forging. On testing at 973 K, a loss in ductility was observed in yttria-containing alloy. The strength and ductility increased with increase in strain rate at 973 K. Reasons for this are discussed. The ODS alloy exhibited a recrystallized microstructure which is difficult to achieve by extrusion. No prior particle boundaries were observed after forging. The forged compacts exhibited isotropic mechanical properties. It is suggested that powder forging may offer several advantages over the traditional extrusion/HIP routes for fabrication of ODS alloys.

Temperament and character properties of primary focal hyperhidrosis patients

Directory of Open Access Journals (Sweden)

Ak Mehmet

2013-01-01

Full Text Available Abstract Background Primary focal hyperhidrosis is a health problem, which has negative effects on the patient's quality of life and significantly affects the patients’ daily activities, social and business life. The aim of this study is to evaluate temperament and character properties of patients diagnosed with primary focal hyperhidrosis. Methods Fifty-six primary focal hyperhidrosis (22.42 ± 7.80 and 49 control subjects (24.48 ± 5.17 participated in the study. Patients who met the diagnostic criteria for PFH were referred to psychiatry clinic where the subjects were evaluated through Structured Clinical Interview for DSM Disorders-I and Temperament and Character Inventory. Results In order to examine the difference between the PFH and control group in terms of temperament and character properties, one-way Multivariate Analysis of Variance (MANOVA was conducted. In terms of temperament properties, PFH group took significantly higher scores than control group in Fatigability and asthenia dimension. In terms of character properties, PFH group scored significantly lower than control group in Purposefulness , Resourcefulness , Self-Directedness and scored significantly higher than control group in Self-forgetfulness and Self-Transcendence. Conclusion Temperament and character features of PFH patients were different from healthy group and it was considered that these features were affected by many factors including genetic, biological, environmental, socio-cultural elements. During the follow-up of PFH cases, psychiatric evaluation is important and interventions, especially psychotherapeutic interventions can increase the chances of success of the dermatological treatments and can have a positive impact on the quality of life and social cohesion of chronic cases.

Fatigue characteristics of ODS surface treated Zircaloy-4

Energy Technology Data Exchange (ETDEWEB)

Kim, Sun Han; Jung, Yan gIl; Park, Dong Jun; Park, Jung Hwan; Kim, Hyun Gil; Yang, Jae Ho; Koo, Yang Hyun [KAERI, Daejeon (Korea, Republic of)

2016-05-15

Various accident tolerant fuel (ATF) cladding concepts are considered and have being developed to increase the oxidation resistance and ballooning/ rupture resistance of current Zr-based cladding material under accident conditions. One concept is to form an oxidation-resistant layer on Zr cladding surface. The other is to increase high temperature mechanical strength of Zr tube. The oxide dispersion strengthened (ODS) zirconium was proposed to increase the strength of the Zr-based alloy up to high temperatures. ODS treatment is a way of improve the high temperature- oxidation resistant and mechanical stress by disperse the hardened particles inside of metal to interrupt the movement of the electric potential. In this study, the accident tolerance improved zirconium alloy by the ODS surface treatment was evaluated for the fatigue characteristics which is one of the significant items of the integrity assessment.

Ion irradiation induced order-to-disorder transformations in δ-phase Sc4-xZr3+xO12+x/2

International Nuclear Information System (INIS)

Zhang, J.; Wang, Y.Q.; Tang, M.; Valdez, J.A.; Sickafus, K.E.

2010-01-01

The purpose of this study is to investigate the role of stoichiometry on crystal structure transformations in derivative fluorite compounds known as delta (δ) phase. In this study, polycrystalline δ-phase ceramic pellets were prepared with stoichiometries given by Sc 4-x Zr 3+x O 12+x/2 (x = 0, 0.77 and 1.20) . The pressed and polished pellets were then irradiated under cryogenic conditions with 200 keV Ne + ions to fluences ranging from 1-5 x 10 14 Ne/cm 2 . An order-to-disorder (O-D) transformation was observed for all compositions, as determined using grazing incidence X-ray diffraction (GIXRD). However, the transformation threshold dose was found to systematically decrease with increasing ZrO 2 content: ∼0.2, ∼0.16, and ∼0.08 dpa for Sc 4-x Zr 3+x O 12+x/2 with x = 0, 0.77, and 1.20, respectively. These irradiation-induced phase transformation results are discussed in terms of the crystal structure of the δ-phase.

[Study on the correlation between PMI and OD changes in rat's plasma].

Science.gov (United States)

Li, Wei; Ke, Yong; He, Guang-she; Xu, Yong-cheng; Wang, Zhen-yuan

2008-12-01

We chose the UV-Vis spectrophotometry as a new way to investigate the postmortem interval (PMI). One hundred fifty Sprague-Dawley female rats (weight 260 g +/- 10 g, from Xi'an Jiaotong University Animal Center) were chosen and sacrificed by cervical dislocation. The bodies were kept in a controlled environmental chamber set at (20 +/- 2) degrees C. The plasma was harvested in course of 0 to 24 hours after death. The optical density (OD) at different wavelengths was measured with an UV-Vis spectrophotometer (type-UV250). It was shown that the OD changes of plasma at 577, 416 and 275 nm in 24 hours were dramatically related to PMI, and the R-indexes were 0.969, 0.97 and 0.898. The regression formulae of these indexes were worked out taking OD as independent variable, and PMI as variable. The quadratic equations were: PMI = 231.2270D(plasma at wavelength of 577 nm) - 501.160D(plasma at wavelength of 577 nm)2 - 3.0809(R2 = 0.945), PMI = 31.7426OD(plasma at wavelength of 416 nm) - 9.1847OD(plasma at wavelength of 416 nm)2 - 31837(R2 = 0.94), and PMI = 95.2388OD(plasma at wavelength of 275 nm) - 39.343OD(plama at wavelength of 275 nm)2 - 32.408(R2 = 0.795). It was concluded that the OD changes of rat's plasma are good and potential markers for the estimation of PMI and should be very useful in forensic practice.

Strangeness photoproduction at the BGO-OD experiment

Energy Technology Data Exchange (ETDEWEB)

Jude, Thomas [Physikalisches Institut, Bonn University (Germany); Collaboration: BGO-OD-Collaboration

2016-07-01

The BGO-OD experiment at the ELSA accelerator facility uses an energy tagged bremstrahlung photon beam to investigate the internal structure of the nucleon. The setup consists of a highly segmented BGO calorimeter surrounding the target, with a particle tracking magnetic spectrometer at forward angles. Compared to constituent quark models (CQMs), models including psuedoscalar meson-baryon interactions have had improved success in describing baryon excitation spectra. For example, the Λ(1405) appears to be dynamically generated from meson-baryon interactions at least to some extent. Vector-meson baryon interactions have also been predicted to dynamically generate states, which may have been observed in photoproduction reactions. BGO-OD is ideal for investigating low momentum transfer processes due to the acceptance and high momentum resolution at forward angles. This enables the investigation of degrees of freedom not derived from CQMs, and in particular, strangeness photoproduction where t-channel exchange mechanisms play a dominant role. With the first major data taking periods for BGO-OD complete, an extensive programme for the investigation of associated strangeness photoproduction has begun.

Dynamics of a two-dimensional order-disorder transition

International Nuclear Information System (INIS)

Sahni, P.S.; Dee, G.; Gunton, J.D.; Phani, M.; Lebowitz, J.L.; Kalos, M.

1981-01-01

We present results of a Monte Carlo study of the time development of a two-dimensional order-disorder model binary alloy following a quench to low temperature from a disordered, high-temperature state. The behavior is qualitatively quite similar to that seen in a recent study of a three-dimensional system. The structure function exhibits a scaling of the form K 2 (t)S(k,t) = G(k/K(t)) where the moment K(t) decreases with time approximately like t/sup -1/2/. If one interprets this moment as being inversely proportional to the domain size, the characteristic domain growth rate is proportional to t/sup -1/2/. Additional insight into this time evolution is obtained from studying the development of the short-range order, as well as from monitoring the growth of a compact ordered domain embedded in a region of opposite order. All these results are consistent with the picture of domain growth as proposed by Lifshitz and by Cahn and Allen

Personality trait interactions in parents of patients with borderline personality disorder: a controlled study using the Temperament and Character Inventory.

Science.gov (United States)

Fassino, Secondo; Amianto, Federico; Gastaldi, Filippo; Abbate-Daga, Giovanni; Brambilla, Francesca; Leombruni, Paolo

2009-01-30

Family environment is a pathogenic factor of borderline personality disorder (BPD). However, the personality traits of patients with BPD and their parents have never been assessed using the same instrument and then examined for relationships. In the present study, we explored the temperament and character traits of BPD patients and their parents to investigate possible interactions. In total, 56 patients with BPD and their parents were evaluated with the Temperament and Character Inventory (TCI) and compared with 53 control families. Discriminant and correlation analyses indicated that subjects with BPD displayed higher levels of novelty seeking, harm avoidance, and self-transcendence and lower levels of self-directedness than control subjects. Their fathers displayed higher levels of novelty seeking and lower levels of persistence and self-directedness, and their mothers displayed lower levels of self-directedness compared with levels in control parents. In BPD families, temperament and character traits displayed high levels of discriminatory power. Novelty seeking in offspring with borderline personality disorder was significantly correlated with their mothers' novelty seeking and their fathers' self-transcendence. Self-directedness in borderline offspring was significantly correlated with both their mothers' and fathers' novelty seeking, and their self-transcendence was significantly correlated with their mothers' novelty seeking and harm avoidance. The different correlational pattern for borderline and control families is discussed. Characteristic personality patterns were found in BPD offspring and in both parents. The relationship between personality traits of borderline offspring and those of their parents may be related to both genetic transmission and family dynamics. Ramifications for treatment are discussed.

Isotope Effects in the Reactions of Chloroform Isotopologues with Cl, OH and OD

DEFF Research Database (Denmark)

Nilsson, Elna Johanna Kristina; Johnson, Matthew Stanley; Nielsen, Claus J.

2009-01-01

The kinetic isotope effects in the reactions of CHCl3, CDCl3, and 13CHCl3 with Cl, OH, and OD radicals have been determined in relative rate experiments at 298 ( 1 K and atmospheric pressure monitored by long path FTIR spectroscopy. The spectra were analyzed using a nonlinear least-squares spectral.......002, kCHCl3+OD/kCDCl3+OD ) 3.95 ( 0.03, and kCHCl3+OD/k13CHCl3+OD ) 1.032 ( 0.004. Larger isotope effects in the OH reactions than in the Cl reactions are opposite to the trends for CH4 and CH3Cl reported in the literature. The origin of these differences was investigated using electronic structure...

Ordering due to disorder in frustrated quantum magnetic system

International Nuclear Information System (INIS)

Yildirim, T.

1999-01-01

The phenomenon of order by disorder in frustrated magnetic systems is reviewed. Disorder (thermal or quantum fluctuations) may sometimes give rise to long range ordering in systems with frustration, where one must often consider the selection among classically degenerate ground states which are not equivalent by any symmetry. The lowest order effects of quantum fluctuations in such frustrated systems usually resolves the continues degeneracy of the ground state manifold into discrete Ising-type degeneracy. A unique ground state selection out of this Ising degenerate manifold then occurs due to higher order effects of quantum fluctuations. For systems such as face-centered cubic and body-centered tetragonal antiferromagnets where the number of Ising parameters to describe the ground state manifold is not macroscopic, we show that quantum fluctuations choose a unique ground state at the first order in 1/S

Temperament and personal character relationship with symptoms of schizophrenia disorder

Directory of Open Access Journals (Sweden)

Abbas Abolghasemi

2011-09-01

Full Text Available Background: Knowledge is limited concerning the role of temperament and character factors on schizophrenia. Recent studies suggest that dimensions of temperament and character influence symptoms and functions in schizophrenia. The purpose of this study was to determine the relationship between temperament and character with positive and negative symptoms in patients with schizophrenia.Methods: The research sample consisted of 100 men which were randomly selected from schizophrenia patients with positive and negative symptoms at Razi hospital in Tabriz. Temperament and character inventory and positive and negative symptoms scale were used for data collection. Data was analyzed using t-test and discriminate analyses. Results: The research findings showed that patients with schizophrenia with negative symptoms had higher levels of self– transcendence and harm avoidance. However, patients with schizophrenia with positive symptoms had higher levels of cooperativeness. The results of discriminate analysis showed that explained 37 percent of variance of self– transcendence, harm avoidance and cooperativeness for only function between groups of schizophrenia with positive and negative symptoms. Discriminate function obtained was classified correctly by stepwise method 68.3 percent schizophrenia with positive and negative symptoms.Conclusion: It can be concluded that self– transcendence, harm avoidance and cooperativeness discriminated the patients with schizophrenia with positive and negative symptoms. The study confirmed important implications about intensity of symptomology and early intervention for patients with schizophrenia.

Crossed beam studies of O-+D2→OD-+D

International Nuclear Information System (INIS)

Johnson, S.G.; Kremer, L.N.; Metral, C.J.; Cross, R.J.

1978-01-01

Using the crossed-beam machine EVA we have measured the product angular and energy distributions of the reaction O - +D 2 →OD - +D in the relative energy range of 1.2-4.7 eV (5.7-23.1 eV LAB). Below 2.5 eV the product distribution is centered about the center of mass, indicating a long-lived complex. Above 2.5 eV the distribution slowly moves forward. Most of the available energy goes into internal energy of the products

Order/disorder in electrodeposited aluminum-titanium alloys

Directory of Open Access Journals (Sweden)

Stafford G.R.

2003-01-01

Full Text Available The composition, morphology, and crystallographic microstructure of Al-Ti alloys electrodeposited from two different chloroaluminate molten salt electrolytes were examined. Alloys containing up to 28 % atomic fraction Ti were electrodeposited at 150 °C from 2:1 AlCl3-NaCl with controlled additions of Ti2+. The apparent limit on alloy composition is proposed to be due to a mechanism by which Al3Ti forms through the reductive decomposition of [Ti(AlCl43]-. The composition of Al-Ti alloys electrodeposited from the AlCl3-EtMeImCl melt at 80 °C is limited by the diffusion of Ti2+ to the electrode surface. Alloys containing up to 18.4 % atomic fraction Ti are only obtainable at high Ti2+ concentrations in the melt and low current densities. Alloys electrodeposited from the higher temperature melt have an ordered L12 crystal structure while alloys of similar composition but deposited at lower temperature are disordered fcc. The appearance of antiphase boundaries in the ordered alloys suggests that the deposit may be disordered initially and then orders in the solid state, subsequent to the charge transfer step and adatom incorporation into the lattice. This is very similar to the disorder-trapping observed in rapidly solidified alloys. The measured domain size is consistent with a mechanism of diffusion-controlled doman growth at the examined deposition temperatures and times.

The Effectiveness of Problem Based Learning Integrated With Islamic Values Based on ICT on Higher Order Thinking Skill and Students’ Character

Directory of Open Access Journals (Sweden)

Chairul Anwar

2017-02-01

Full Text Available The focus of this research is to known the influence of Problem Based Learning (PBL model application, that intergrated with Islamic values based on ICT, toward the ability of higher-order thinkingskill and the strenghtening of students’ characters. This research is quasy experiment type with group design pretest-postest. The research was conducted in SMA.Sampling by means of random sampling, to determine the control class and experimentalclass.Data analysis technique used is the t-test, based on the value of significance, as well as test-effect size. The research data shows that the model of problem based learning integrates Islamic values based on ICThas positive influence towards the increasing of higher-order thinking skill and the strenghtening of students’ characters compared to the students that use conventional method.The result of effect size test on experimental class in on medium category. It means that the learning which use problem based learning (PBL model, integrated with Islamic values based on ICT, can be said effective on increasing higher order thinking skillof students.

46 CFR 280.8 - Certain ODS agreement provisions not affected.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Certain ODS agreement provisions not affected. 280.8 Section 280.8 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGULATIONS AFFECTING... LINER OPERATORS § 280.8 Certain ODS agreement provisions not affected. The provisions of this part are...

HPLC separation of triacylglycerol positional isomers on a polymeric ODS column.

Science.gov (United States)

Kuroda, Ikuma; Nagai, Toshiharu; Mizobe, Hoyo; Yoshimura, Nobuhito; Gotoh, Naohiro; Wada, Shun

2008-07-01

A polymeric ODS column was applied to the resolution of triacylglycerol positional isomers (TAG-PI), i.e. 1,3-dioleoyl-2-palmitoyl-glycerol (OPO) and 1,2-dioleoyl-3-palmitoyl-rac-glycerol (OOP), with a recycle HPLC system. To investigate the ODS column species and the column temperatures for the resolution of a TAG-PI pair, a mixture of OPO and OOP was subjected to an HPLC system equipped with a non-endcapped polymeric, endcapped monomeric, endcapped intermediate, or non-endcapped monomeric ODS column at three different column temperatures (40, 25, or 10 degrees C). Only the non-endcapped polymeric ODS column achieved the separation of OPO and OOP, and the lowest column temperature (10 degrees C) showed the best resolution for them. The other pair of TAG-PI, a mixture of 1,3-dipalmitoyl-2-oleoyl-glycerol (POP) and 1,2-dipalmitoyl-3-oleoyl-rac-glycerol (PPO) was also subjected to the system equipped with a non-endcapped polymeric or monomeric ODS column at five different column temperatures (40, 32, 25, 17, and 10 degrees C). Thus, POP and PPO were also separated on only the non-endcapped polymeric ODS column at 25 degrees C. However, no clear peak appeared at 10 degrees C. These results would indicate that the polymeric ODS stationary phase has an ability to recognize the structural differences between TAG-PI pairs. Also, the column temperature is a very important factor for separating the TAG-PI pair, and the optimal temperature would relate to the solubility of TAG-PI in the mobile phase. Furthermore, the recycle HPLC system provided measurements for the separation and analysis of TAG-PI pairs.

Relationship between microstructure and mechanical properties in ODS materials for nuclear application

International Nuclear Information System (INIS)

De Carlan, Y.

2013-01-01

Oxide Dispersion Strengthened ferritic/martensitic alloys are developed as prospective cladding materials for future Sodium-Cooled-Fast-Reactors (GEN IV) [1]. These advanced alloys present a good resistance to irradiation and a high creep rupture strength due to a reinforcement by the homogeneous dispersion of hard nano-sized particles (such as Y 2 O 3 or YTiO). ODS alloys are elaborated by powder metallurgy, consolidated by hot extrusion and manufactured into cladding tube using the Pilger cold-rolling process [2, 3]. ODS alloys present usually low ductility and high hardness. The aim of this talk is to present the specificity of the metallurgy of ODS materials in relationship with the main mechanical properties (tensile and creep properties, toughness, transition temperature). Two types of alloys will be presented: Fe-9Cr martensitic ODS and Fe-14Cr ferritic ODS alloys. Mechanical properties of the materials depend on the metallurgical state (fine grains, recrystallized, martensitic) and very different behaviors are observed as a function of final microstructure. For example, for a Fe-9Cr ODS alloy, tempered martensite lets obtaining material with high strength whereas softened ferrite see figure 1 [4] tolerates high deformation levels. (authors)

Size effect on order-disorder transition kinetics of FePt nanoparticles

International Nuclear Information System (INIS)

Zhang, Shuaidi; Qi, Weihong; Huang, Baiyun

2014-01-01

The kinetics of order-disorder transition of FePt nanoparticles during high temperature annealing is theoretically investigated. A model is developed to address the influence of large surface to volume ratio of nanoparticles on both the thermodynamic and kinetic aspect of the ordering process; specifically, the nucleation and growth of L1 0 ordered domain within disordered nanoparticles. The size- and shape-dependence of transition kinetics are quantitatively addressed by a revised Johnson-Mehl-Avrami equation that included corrections for deviations caused by the domination of surface nucleation in nanoscale systems and the non-negligible size of the ordered nuclei. Calculation results based on the model suggested that smaller nanoparticles are kinetically more active but thermodynamically less transformable. The major obstacle in obtaining completely ordered nanoparticles is the elimination of antiphase boundaries. The results also quantitatively confirmed the existence of a size-limit in ordering, beyond which, inducing order-disorder transitions through annealing is impossible. A good agreement is observed between theory, experiment, and computer simulation results

Microstructural and mechanical property characterization of ingot metallurgy ODS iron aluminide

Energy Technology Data Exchange (ETDEWEB)

Sikka, V.K.; Howell, C.R. [Oak Ridge National Lab., TN (United States); Hall, F.; Valykeo, J. [Hoskins Mfg. Co., Hamburg, MI (United States)

1997-12-01

This paper deals with a novel, lower cost method of producing a oxide dispersion strengthened (ODS) iron-aluminide alloy. A large 250-kg batch of ODS iron-aluminide alloy designated as FAS was produced by Hoskins Manufacturing Company (Hoskins) [Hamburg, Michigan] using the new process. Plate and bar stock of the ODS alloy were the two major products received. Each of the products was characterized for its microstructure, including grain size and uniformity of oxide dispersion. Tensile tests were completed from room temperature to 1100 C. Only 100-h creep tests were completed at 800 and 1000 C. The results of these tests are compared with the commercial ODS alloy designated as MA-956. An assessment of these data is used to develop future plans for additional work and identifying applications.

Personality Characteristics of Adults With Autism Spectrum Disorders or Attention Deficit Hyperactivity Disorder With and Without Substance Use Disorders

NARCIS (Netherlands)

Sizoo, Bram; van den Brink, Wim; van Eenige, Marielle Gorissen; van der Gaag, Rutger Jan

We examined temperament and character profiles of 128 adults with autism spectrum disorder (ASD) or attention deficit and hyperactivity disorder (ADHD). Participants completed the abbreviated Temperament and Character Inventory. The ASD and ADHD groups showed distinct temperament profiles (ADHD:

Personality Characteristics of Adults With Autism Spectrum Disorders or Attention Deficit Hyperactivity Disorder With and Without Substance Use Disorders

NARCIS (Netherlands)

Sizoo, Bram; van den Brink, Wim; van Eenige, Marielle Gorissen; van der Gaag, Rutger Jan

2009-01-01

We examined temperament and character profiles of 128 adults with autism spectrum disorder (ASD) or attention deficit and hyperactivity disorder (ADHD). Participants completed the abbreviated Temperament and Character Inventory. The ASD and ADHD groups showed distinct temperament profiles (ADHD:

Self-ion Irradiation Damage of F/M and ODS steels

International Nuclear Information System (INIS)

Kang, Suk Hoon; Chun, Young-Bum; Noh, Sanghoon; Jang, Jinsung; Kim, Tae Kyu

2014-01-01

Oxide dispersion strengthened (ODS) ferritic steels are potential high-temperature materials that are stabilized by dispersed particles at elevated temperatures. These dispersed particles improve the tensile strength and creep rupture strength, they are expected to increase the operation temperature up to approximately 650 .deg. C and also enhance the energy efficiency of the fusion reactor. Some reports described that the nano-clusters are strongly resistant to coarsening by annealing up to 1000 .deg. C, and nanoclusters do not change after ion irradiation up to 0.7 dpa at 300 .deg. C. ODS steels will be inevitably exposed to neutron irradiation condition; the irradiation damages, creep and swelling are always great concern. The dispersed oxide particles are believed to determine the performance of the steel, even the radiation resistance. In this study, F/M and ODS model alloys of Korea Atomic Energy Research Institute (KAERI) were irradiated by Fe 3+ self-ion to emulate the neutron irradiation effect. In this study, Fe 3+ self-ion irradiation is used as means of introducing radiation damage in F/M steel and ODS steel. The ion accelerator named DuET (in Kyoto University, Japan) was used for irradiation of Fe 3+ ion by 6.4 MeV at 300 .deg. C. The maximum damage rate in F/M and ODS steels were estimated roughly 6 dpa. After radiation, point or line defects were dominantly observed in F/M steel, on the other hands, small circular cavities were typically observed in ODS steel. Nanoindentation is a useful tool to determine the irradiationinduced hardness change in the damage layer of ionirradiated iron base alloys

Lacanian Orders in Eugene O’Neill’s Long Day’s Journey into Night

Directory of Open Access Journals (Sweden)

Sima Farshid

2013-03-01

Full Text Available This paper presents a Lacanian reading of Eugene O’Neill’s Long Day’s Journey into Night (1941 by drawing on the psychic orders the well-known French psychoanalyst Jacques Lacan has propounded. He holds that human psyche is formed of three orders (the Imaginary, the Symbolic and the Real which mold the unconscious mind and motivate human actions and reactions. He also argues that the Other has an immense impact on the formation of psychic orders, especially the Symbolic, and hence on one’s identity. The present article attempts to investigate the three orders of the characters O’Neill has portrayed in Long Day’s Journey into Night, besides the role of the Other in the formation of those orders. The reactions of these characters to the outside world are regarded here as the outer presentation of their troubled mind. It is also discussed that the mental and physical problems and disorders of these characters, such as their addiction to alcohol and drugs, are the outcome of their repressed desires which have remained unfulfilled because of the rules defined and imposed on them by the Other – hence the frustrating sense of lack observed in all four characters.

HRTEM Study of the Role of Nanoparticles in ODS Ferritic Steel

Energy Technology Data Exchange (ETDEWEB)

Hsiung, L; Tumey, S; Fluss, M; Serruys, Y; Willaime, F

2011-08-30

Structures of nanoparticles and their role in dual-ion irradiated Fe-16Cr-4.5Al-0.3Ti-2W-0.37Y{sub 2}O{sub 3} (K3) ODS ferritic steel produced by mechanical alloying (MA) were studied using high-resolution transmission electron microscopy (HRTEM) techniques. The observation of Y{sub 4}Al{sub 2}O{sub 9} complex-oxide nanoparticles in the ODS steel imply that decomposition of Y{sub 2}O{sub 3} in association with internal oxidation of Al occurred during mechanical alloying. HRTEM observations of crystalline and partially crystalline nanoparticles larger than {approx}2 nm and amorphous cluster-domains smaller than {approx}2 nm provide an insight into the formation mechanism of nanoparticles/clusters in MA/ODS steels, which we believe involves solid-state amorphization and re-crystallization. The role of nanoparticles/clusters in suppressing radiation-induced swelling is revealed through TEM examinations of cavity distributions in (Fe + He) dual-ion irradiated K3-ODS steel. HRTEM observations of helium-filled cavities (helium bubbles) preferably trapped at nanoparticle/clusters in dual-ion irradiated K3-ODS are presented.

Character Apps for Children's Snacks: Effects of Character Awareness on Snack Selection and Consumption Patterns.

Science.gov (United States)

Putnam, Marisa M; Cotto, Caroline E; Calvert, Sandra L

2018-04-01

Media characters are used to market snacks that are typically of poor nutritional value, which has been linked to childhood obesity. This study examines whether children's snack selections and consumption patterns are influenced by an app depicting a popular children's media character, as well as the role that children's awareness of the character plays. The results can increase our understanding of how to encourage healthier snack selection and consumption in newer game-based marketing venues, such as apps. Four- and 5-year-old children (N = 132) played a bowling game on an iPad with no character or with a character holding either healthier or unhealthy snacks. After app-play, children selected and consumed healthier or unhealthy snacks. Children's awareness of the character was measured by children's verbalizations of the character's name during or after app-play. An ordered logistic regression found no significant effect of treatment conditions compared with the control group. Within treatment conditions, awareness of the character led to selection and consumption of more healthy snacks in the healthier condition (odds ratio β = 10.340, P = 0.008), and of unhealthy snacks in the unhealthy condition (odds ratio β = 0.228, P = 0.033), but children were unaware that the character influenced their decisions. Results suggest that young children will choose and consume healthier, not just unhealthy, products when they are aware that a popular character in an app is associated with the snack, potentially leading to healthier eating patterns.

Inhibitory effect of PTD-OD-HA fusion protein on Bcr-Abl in K562 cells

Directory of Open Access Journals (Sweden)

Miao GAO

2012-10-01

Full Text Available Objective　To study the transduction dynamics, location of PTD-OD-HA fusion protein and its interaction with Bcr-Abl oncoprotein in K562 cell lines, and explore the influence of PTD-OD-HA fusion protein on oligomerization and tyrosine kinase activity of Bcr-Abl. Methods　PTD-OD-HA fusion protein was labeled with FITC and co-cultured with K562 cells. The transduction efficiency of labeled PTD-OD-HA at different doses and time intervals was observed under fluorescence microscope. The location of labeled PTD-OD-HA fusion protein in K562 cells was detected by confocal microscopy. The interaction of PTD-OD-HA fusion protein with Bcr-Abl oncoprotein was confirmed by coimmunoprecipitation. The phosphorylation of Bcr-Abl oncoprotein was detected by Western blotting. Results　PTD-OD-HA fusion protein labeled with FITC was transduced into K562 cells in a dose- and time-dependent manner. PTD-OD-HA fusion protein was located in the cytoplasm of K562 cells and was consistent with the location of Bcr-Abl oncoprotein. The interaction of PTD-OD-HA fusion protein with Bcr-Abl oncoprotein was proved in K562 cells. This interaction could interrupt the homologous oligomerization of Bcr-Abl oncoprotein and reduce the phosphorylation of Bcr-Abl oncoprotein. Conclusion　PTD-OD-HA fusion protein could be transduced into K562 cells efficiently, inhibit the oligomerization and reduce the phosphorylation of Bcr-Abl oncoprotein.

The genetic and environmental structure of the character sub-scales of the temperament and character inventory in adolescence.

Science.gov (United States)

Lester, Nigel; Garcia, Danilo; Lundström, Sebastian; Brändström, Sven; Råstam, Maria; Kerekes, Nóra; Nilsson, Thomas; Cloninger, C Robert; Anckarsäter, Henrik

2016-01-01

The character higher order scales (self-directedness, cooperativeness, and self-transcendence) in the temperament and character inventory are important general measures of health and well-being [Mens Sana Monograph 11:16-24 (2013)]. Recent research has found suggestive evidence of common environmental influence on the development of these character traits during adolescence. The present article expands earlier research by focusing on the internal consistency and the etiology of traits measured by the lower order sub-scales of the character traits in adolescence. The twin modeling analysis of 423 monozygotic pairs and 408 same sex dizygotic pairs estimated additive genetics (A), common environmental (C), and non-shared environmental (E) influences on twin resemblance. All twins were part of the on-going longitudinal Child and Adolescent Twin Study in Sweden (CATSS). The twin modeling analysis suggested a common environmental contribution for two out of five self-directedness sub-scales (0.14 and 0.23), for three out of five cooperativeness sub-scales (0.07-0.17), and for all three self-transcendence sub-scales (0.10-0.12). The genetic structure at the level of the character lower order sub-scales in adolescents shows that the proportion of the shared environmental component varies in the trait of self-directedness and in the trait of cooperativeness, while it is relatively stable across the components of self-transcendence. The presence of this unique shared environmental effect in adolescence has implications for understanding the relative importance of interventions and treatment strategies aimed at promoting overall maturation of character, mental health, and well-being during this period of the life span.

Investigation of microstructure changes in ODS-EUROFER after hydrogen loading

International Nuclear Information System (INIS)

Emelyanova, O.V.; Ganchenkova, M.G.; Malitskii, E.; Yagodzinskyy, Y.N.; Klimenkov, M.; Borodin, V.A.; Vladimirov, P.V.; Lindau, R.; Möslang, A.; Hänninen, H.

2016-01-01

The effect of hydrogen on the microstructure of mechanically tested ODS-EUROFER steel was investigated by means of transmission electron microscopy, thermal desorption spectroscopy, and atomistic simulations. The presence of yttrium oxide particles notably increases hydrogen uptake in ODS-EUROFER steel as compared to ODS-free EUROFER 97. Under tensile loading, hydrogen accumulation promotes the loss of cohesion at the oxide particle interfaces. First-principles molecular dynamics simulations indicate that hydrogen can be trapped at nanoparticle/matrix interface, creating OH-groups. The accumulation of hydrogen atoms at the oxide particle surface can be the reason for the observed hydrogen-induced oxide/matrix interface weakening and de-cohesion under the action of external tensile stress.

Implementing the problem-based learning in order to improve the students’ HOTS and characters

Directory of Open Access Journals (Sweden)

Jailani Jailani

2017-11-01

Full Text Available The study was to describe the implementation of Problem-Based Learning (PBL toward the improvement of students’ Higher Order Thinking Skill (HOTS and characters and to describe the obstacles that had been encountered within the implementation. The study was a mixed research that made use of concurrent mixed method design. The population in the study was the students from eight junior high schools that had been selected from six provinces in Indonesia namely the Yogyakarta Special Region, Bengkulu, South Borneo, West Nusa Tenggara, Southeast Sulawesi and Papua. There were 648 students who had been selected randomly from these schools. The researchers conducted the PBL process within the experimental classes and the expository learning process within the eight control classes. The data gathering process was conducted through the test, the self-assessment and the open questionnaire. The quantitative data analysis was conducted inferentially using multivariate and univariate analysis, while the qualitative data analysis was conducted descriptively. The results of the study showed that: (1 the implementation of PBL had been more effective in comparison to the expository one in terms improving the students’ HOTS; (2 the implementation of PBL had not been more effective in comparison to the expository one in terms of improving the students’ characters; and (3 in overall the obstacles that had been encountered within the implementation of PBL process were related to the teachers’ unpreparedness, the time allocation, the unequal students’ input, the students’ learning habits and the difficult assessment.

Origin of ordered and disordered phenomena in plasma

International Nuclear Information System (INIS)

Sanduloviciu, M.

1993-01-01

Resuming the contents of previously published papers it is shown that ordered and disordered spatial and temporal structures have at their origin a space charge arrangement produced and maintained under conditions in which the excitation and ionization cross-sections increase suddenly in different adjacent regions of a current-carrying gaseous conductor. The appearing double layer structure is the result of a self-organization process which it-self assures the conditions for its existence. Acting as an autonomous body whose genesis implies an energy accumulation mechanism it is possible to explain in a new manner the appearance of ordered and disordered temporal structures in different plasma devices but also the genesis of artificial and natural well-ordered space charge structures such as fireball and ball lightning. Additionally, it is shown that the described double-layer physical scenario can be a tentative model adequate to explain the genesis of prebiotic cellular structures as those appeared under primeval Earth conditions. (Author)

Effect of zirconium addition on the microstructure and mechanical properties of ODS ferritic steels containing aluminum

International Nuclear Information System (INIS)

Gao, R.; Zhang, T.; Wang, X.P.; Fang, Q.F.; Liu, C.S.

2014-01-01

The oxide dispersion strengthened (ODS) ferritic steels with nominal composition of Fe–16Cr–2W–0.5Ti–0.4Y 2 O 3 –4Al–1Zr (16Cr–4Al–Zr–ODS) were fabricated by a sol–gel method combining with mechanical alloying and spark plasma sintering (SPS) technique, and the 16Cr–ODS and 16Cr–4Al–ODS steels were prepared for comparison in the same way. Microstructure characterization reveals that in the 16Cr–4Al–ODS steel coarse Y–Al–O particles were formed while in the 16Cr–4Al–Zr–ODS steel finer Y–Zr–O particles were formed. The mean size and number density of the nano-oxide particles in the 16Cr–4Al–Zr–ODS steel are about 25 nm and 2.6 × 10 21 /m 3 , respectively. The ultimate tensile strength (UTS) of the 16Cr–ODS steel is about 1045 MPa, but UTS of the 16Cr–4Al–ODS steel decreases to 974 MPa. However, UTS of the 16Cr–4Al–Zr–ODS steel increases to 1180 MPa while keeping a large uniform elongation up to 23%, indicating the enhancement of mechanical properties by Zr addition

Features of order-disorder phase transformation in nonstoichiometric transition metals carbides

International Nuclear Information System (INIS)

Emel'yanov, A.N.

1996-01-01

Measurements of temperature and electric conductivity of nonstoichiometric transition metals carbides TiC χ and NbC χ in the area of order-disorder phase transformation are carried out. There are certain peculiarities on the temperature and electric conductivity curves of the carbides, connected with the carbon sublattice disordering. On the basis of the anomalies observed on the curves of the temperature conductivity of nonstoichiometric carbides of transition metals above the temperature of the order-disorder transition the existence of the second structural transition is supposed

The differences in temperament–character traits, suicide attempts, impulsivity, and functionality levels of patients with bipolar disorder I and II

Directory of Open Access Journals (Sweden)

Izci F

2016-01-01

Full Text Available Filiz Izci,1 Ebru Kanmaz Findikli,2 Serkan Zincir,3 Selma Bozkurt Zincir,4 Merve Iris Koc4 1Department of Psychiatry, School of Medicine, Istanbul Bilim University, Istanbul, 2Department of Psychiatry, School of Medicine, Kahramanmaras Sutcu Imam University, Kahramanmaras, 3Department of Psychiatry, Kocaeli Gölcük Military Hospital, Kocaeli, 4Department of Psychiatry, Erenköy Training and Research Hospital for Psychiatric and Neurological Disorders, Istanbul, Turkey Background: The primary aim of this study was to compare the differences in temperament-character traits, suicide attempts, impulsivity, and functionality levels of patients with bipolar disorder I (BD-I and bipolar disorder II (BD-II.Methods: Fifty-two BD-I patients and 49 BD-II patients admitted to Erenköy Mental and Neurological Disease Training and Research Hospital psychiatry clinic and fifty age- and sex-matched healthy control subjects were enrolled in this study. A structured clinical interview for Diagnostic and Statistical Manual of Mental Disorders, 4th Edition Axis I Disorders, Temperament and Character Inventory, Barrett Impulsiveness Scale-11 (BIS-11, Hamilton Depression Inventory Scale, Young Mania Rating Scale, and Bipolar Disorder Functioning Questionnaire (BDFQ were administered to patients and to control group.Results: No statistically significant difference in sociodemographic features existed between the patient and control groups (P>0.05. Thirty-eight subjects (37.62% in the patient group had a suicide attempt. Twenty-three of these subjects (60.52% had BD-I, and 15 of these subjects (39.47% had BD-II. Suicide attempt rates in BD-I and II patients were 60.52% and 39.47%, respectively (P<0.05. Comparison of BD-I and II patients with healthy control subjects revealed that cooperativeness (C, self-directedness (Sdi, and self-transcendence (ST scores were lower and novelty seeking (NS1 and NS2, harm avoidance (HA4, and reward dependence (RD2 subscale scores

Generalized Bragg-Williams model for the size-dependent order-disorder transition of bimetallic nanoparticles

International Nuclear Information System (INIS)

Li, Y J; Qi, W H; Wang, M P; Liu, J F; Xiong, S Y; Huang, B Y

2011-01-01

Considering the different effects of exterior atoms (face, edge and corner atoms), the Bragg-Williams model is generalized to account for the size, shape and composition-dependent order-disorder transition of bimetallic nanoparticles (NPs) with B 2 , L1 0 and L1 2 ordered structures. The results show that the order-disorder temperatures T C,p are different for different shapes even in the identical particle size. The order of order-disorder temperatures of different shapes varies for different sizes. The long-range order parameter decreases with the increase in temperature in all size ranges and decreases smoothly in large sizes, but drops dramatically in small sizes. Moreover, it is also found that the order-disorder temperature of bimetallic NPs rises with increasing particle sizes and decreases with a deviation from the ideal compositions. The present predictions are consistent with the available literature results, indicating its capability in predicting other order-disorder transition phenomena of bimetallic NPs.

The protective effect of character maturity in child aggressive antisocial behavior.

Science.gov (United States)

Kerekes, Nóra; Falk, Örjan; Brändström, Sven; Anckarsäter, Henrik; Råstam, Maria; Hofvander, Björn

2017-07-01

Childhood aggressive antisocial behavior (CD) is one of the strongest predictors of mental health problems and criminal behavior in adulthood. The aims of this study were to describe personality profiles in children with CD, and to determine the strength of association between defined neurodevelopmental symptoms, dimensions of character maturity and CD. A sample of 1886 children with a close to equal distribution of age (9 or 12) and gender, enriched for neurodevelopmental and psychiatric problems were selected from the nationwide Child and Adolescent Twin Study in Sweden. Their parents rated them according to the Junior Temperament and Character Inventory following a telephone interview during which information about the children's development and mental health was assessed with the Autism-Tics, AD/HD and other Comorbidities inventory. Scores on the CD module significantly and positively correlated with scores on the Novelty Seeking temperament dimension and negatively with scores on character maturity (Self-Directedness and Cooperativeness). In the group of children with either neurodevelopmental or behavioral problems, the prevalence of low or very low character maturity was 50%, while when these two problems coexisted the prevalence of low or very low character maturity increased to 70%. Neurodevelopmental problems (such as: oppositional defiant disorder, symptoms of attention deficit/hyperactivity disorder and autism spectrum disorder) and low scores on character maturity emerged as independently significant predictors of CD; in a multivariable model, only oppositional defiant symptoms and impulsivity significantly increased the risk for coexisting CD while a mature self-agency in a child (Self-Directedness) remained a significant protective factor. These results suggest that children's willpower, the capacity to achieve personally chosen goals may be an important protective factor - even in the presence of neurodevelopmental and psychiatric problems - against

Hardness distribution and effect of irradiation in FSW-ODS ferritic steels

International Nuclear Information System (INIS)

Noh, Sanghoon; Kasada, Ryuta; Kimura, Akihiko; Nagasaka, Takuya; Sokolov, M.A.; Yamamoto, T.

2014-01-01

Oxide dispersion strengthened ferritic steels (ODS-FS) have been considered as one of the most promising structural materials for advanced nuclear systems such as fusion reactors and next generation fission reactors, because of its excellent elevated temperature strength, corrosion and radiation resistance. Especially, irradiation resistance is a critical issue for the high performance of ODS-FS. In this study, effects of the irradiation on hardness properties of friction stri processed (FSP) ODS-FS were investigated. FSP technique was employed on ODS-FS. A plate specimen was cut out from the cross section and irradiated to 1.2 dpa at 573K in the High Flux Isotope Reactor (HFIR). To investigate the effect of neutron irradiation on processed area, the hardness distributions were evaluated on the cross section. Hardness of FSP ODS-FS was various with each microstructure after irradiation to 1.2 dpa at 573K. The increase of Vickers hardness was significant in the stirred zone and heat affected zone. Base material exhibited the lowest hardening about 38HV. Since nano-oxide particles in stirred zone showed identical mean diameter and number density, it is considered that hardening differences between stirred zone and base material is due to differences in initial dislocation density. (author)

Development of Austenitic ODS Strengthened Alloys for Very High Temperature Applications

Energy Technology Data Exchange (ETDEWEB)

Stubbins, James [Univ. of Illinois, Urbana-Champaign, IL (United States); Heuser, Brent [Univ. of Illinois, Urbana-Champaign, IL (United States); Robertson, Ian [Kyushu Univ. (Japan); Sehitoglu, Huseyin [Univ. of Illinois, Urbana-Champaign, IL (United States); Sofronis, Petros [Kyushu Univ. (Japan); Gewirth, Andrew [Kyushu Univ. (Japan)

2015-04-22

This “Blue Sky” project was directed at exploring the opportunities that would be gained by developing Oxide Dispersion Strengthened (ODS) alloys based on the Fe-Cr-Ni austenitic alloy system. A great deal of research effort has been directed toward ferritic and ferritic/martensitic ODS alloys which has resulted in reasonable advances in alloy properties. Similar gains should be possible with austenitic alloy which would also take advantage of other superior properties of that alloy system. The research effort was aimed at the developing an in-depth understanding of the microstructural-level strengthening effects of ODS particles in austentic alloys. This was accomplished on a variety of alloy compositions with the main focus on 304SS and 316SS compositions. A further goal was to develop an understanding other the role of ODS particles on crack propagation and creep performance. Since these later two properties require bulk alloy material which was not available, this work was carried out on promising austentic alloy systems which could later be enhanced with ODS strengthening. The research relied on a large variety of micro-analytical techniques, many of which were available through various scientific user facilities. Access to these facilities throughout the course of this work was instrumental in gathering complimentary data from various analysis techniques to form a well-rounded picture of the processes which control austenitic ODS alloy performance. Micromechanical testing of the austenitic ODS alloys confirmed their highly superior mechanical properties at elevated temperature from the enhanced strengthening effects. The study analyzed the microstructural mechanisms that provide this enhanced high temperature performance. The findings confirm that the smallest size ODS particles provide the most potent strengthening component. Larger particles and other thermally- driven precipitate structures were less effective contributors and, in some cases, limited

Character Decomposition and Transposition Processes in Chinese Compound Words Modulates Attentional Blink.

Science.gov (United States)

Cao, Hongwen; Gao, Min; Yan, Hongmei

2016-01-01

The attentional blink (AB) is the phenomenon in which the identification of the second of two targets (T2) is attenuated if it is presented less than 500 ms after the first target (T1). Although the AB is eliminated in canonical word conditions, it remains unclear whether the character order in compound words affects the magnitude of the AB. Morpheme decomposition and transposition of Chinese two-character compound words can provide an effective means to examine AB priming and to assess combinations of the component representations inherent to visual word identification. In the present study, we examined the processing of consecutive targets in a rapid serial visual presentation (RSVP) paradigm using Chinese two-character compound words in which the two characters were transposed to form meaningful words or meaningless combinations (reversible, transposed, or canonical words). We found that when two Chinese characters that form a compound word, regardless of their order, are presented in an RSVP sequence, the likelihood of an AB for the second character is greatly reduced or eliminated compared to when the two characters constitute separate words rather than a compound word. Moreover, the order of the report for the two characters is more likely to be reversed when the normal order of the two characters in a compound word is reversed, especially when the interval between the presentation of the two characters is extremely short. These findings are more consistent with the cognitive strategy hypothesis than the resource-limited hypothesis during character decomposition and transposition of Chinese two-character compound words. These results suggest that compound characters are perceived as a unit, rather than two separate words. The data further suggest that readers could easily understand the text with character transpositions in compound words during Chinese reading.

Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions

Energy Technology Data Exchange (ETDEWEB)

Yano, Y., E-mail: yano.yasuhide@jaea.go.jp [Japan Atomic Energy Agency, 4002, Narita-cho, Oarai-machi, Ibaraki, 311-1393 (Japan); Tanno, T.; Oka, H.; Ohtsuka, S.; Inoue, T.; Kato, S.; Furukawa, T.; Uwaba, T.; Kaito, T. [Japan Atomic Energy Agency, 4002, Narita-cho, Oarai-machi, Ibaraki, 311-1393 (Japan); Ukai, S.; Oono, N. [Materials Science and Engineering, Faculty of Engineering, Hokkaido University, N13, W-8, Kita-ku, Sapporo, Hokkaido, 060-8628 (Japan); Kimura, A. [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Hayashi, S. [Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Torimaru, T. [Nippon Nuclear Fuel Development Co., Ltd., 2163, Narita-cho, Oarai-machi, Ibaraki, 311-1313 (Japan)

2017-04-15

Ultra-high temperature ring tensile tests were performed to investigate the tensile behavior of oxide dispersion strengthened (ODS) steel claddings and wrapper materials under severe accident conditions with temperatures ranging from room temperature to 1400 °C which is close to the melting point of core materials. The experimental results showed that the tensile strength of 9Cr-ODS steel claddings was highest in the core materials at ultra-high temperatures of 900–1200 °C, but there was significant degradation in the tensile strength of 9Cr-ODS steel claddings above 1200 °C. This degradation was attributed to grain boundary sliding deformation with γ/δ transformation, which is associated with reduced ductility. By contrast, the tensile strength of recrystallized 12Cr-ODS and FeCrAl-ODS steel claddings retained its high value above 1200 °C, unlike the other tested materials.

Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions

Science.gov (United States)

Yano, Y.; Tanno, T.; Oka, H.; Ohtsuka, S.; Inoue, T.; Kato, S.; Furukawa, T.; Uwaba, T.; Kaito, T.; Ukai, S.; Oono, N.; Kimura, A.; Hayashi, S.; Torimaru, T.

2017-04-01

Ultra-high temperature ring tensile tests were performed to investigate the tensile behavior of oxide dispersion strengthened (ODS) steel claddings and wrapper materials under severe accident conditions with temperatures ranging from room temperature to 1400 °C which is close to the melting point of core materials. The experimental results showed that the tensile strength of 9Cr-ODS steel claddings was highest in the core materials at ultra-high temperatures of 900-1200 °C, but there was significant degradation in the tensile strength of 9Cr-ODS steel claddings above 1200 °C. This degradation was attributed to grain boundary sliding deformation with γ/δ transformation, which is associated with reduced ductility. By contrast, the tensile strength of recrystallized 12Cr-ODS and FeCrAl-ODS steel claddings retained its high value above 1200 °C, unlike the other tested materials.

Development of ODS FeCrAl alloys for accident-tolerant fuel cladding

Energy Technology Data Exchange (ETDEWEB)

Dryepondt, Sebastien N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hoelzer, David T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pint, Bruce A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Unocic, Kinga A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-09-18

FeCrAl alloys are prime candidates for accident-tolerant fuel cladding due to their excellent oxidation resistance up to 1400 C and good mechanical properties at intermediate temperature. Former commercial oxide dispersion strengthened (ODS) FeCrAl alloys such as PM2000 exhibit significantly better tensile strength than wrought FeCrAl alloys, which would alloy for the fabrication of a very thin (~250 m) ODS FeCrAl cladding and limit the neutronic penalty from the replacement of Zr-based alloys by Fe-based alloys. Several Fe-12-Cr-5Al ODS alloys where therefore fabricated by ball milling FeCrAl powders with Y2O3 and additional oxides such as TiO₂ or ZrO₂. The new Fe-12Cr-5Al ODS alloys showed excellent tensile strength up to 800 C but limited ductility. Good oxidation resistance in steam at 1200 and 1400 C was observed except for one ODS FeCrAl alloy containing Ti. Rolling trials were conducted at 300, 600 C and 800 C to simulate the fabrication of thin tube cladding and a plate thickness of ~0.6mm was reached before the formation of multiple edge cracks. Hardness measurements at different stages of the rolling process, before and after annealing for 1h at 1000 C, showed that a thinner plate thickness could likely be achieved by using a multi-step approach combining warm rolling and high temperature annealing. Finally, new Fe-10-12Cr-5.5-6Al-Z gas atomized powders have been purchased to fabricate the second generation of low-Cr ODS FeCrAl alloys. The main goals are to assess the effect of O, C, N and Zr contents on the ODS FeCrAl microstructure and mechanical properties, and to optimize the fabrication process to improve the ductility of the 2nd gen ODS FeCrAl while maintaining good mechanical strength and oxidation resistance.

Efficient real time OD matrix estimation based on principal component analysis

NARCIS (Netherlands)

Djukic, T.; Flötteröd, G.; Van Lint, H.; Hoogendoorn, S.P.

2012-01-01

In this paper we explore the idea of dimensionality reduction and approximation of OD demand based on principal component analysis (PCA). First, we show how we can apply PCA to linearly transform the high dimensional OD matrices into the lower dimensional space without significant loss of accuracy.

Sibship size, birth order, family structure and childhood mental disorders.

Science.gov (United States)

Carballo, Juan J; García-Nieto, Rebeca; Alvarez-García, Raquel; Caro-Cañizares, Irene; López-Castromán, Jorge; Muñoz-Lorenzo, Laura; de Leon-Martinez, Victoria; Baca-García, Enrique

2013-08-01

The aim of this study was to determine the role that birth order, sibship size and family structure have as risk factors in the development of common childhood mental disorders. A case-control study design was conducted (N = 16,823). The group under study consisted of all those subjects who had consulted with a psychiatrist/psychologist and had received a clinical diagnosis at public mental health centres within the Region of Madrid (Spain), between 1980 and 2008. A multiple logistic regression was used to explore the independent association with each diagnosis: emotional disorders (ED) with onset specific to childhood, attention deficit hyperactivity disorder (ADHD), conduct disorder (CD), mental retardation (MR), and pervasive developmental disorder (PDD). Birth order and family structure significantly predicted the risk of being diagnosed with ED or ADHD. In addition, sibship size and sex predicted the risk of being diagnosed with a childhood mental disorder. We concluded that being the middle child and living with both biological parents appear to be protective factors against the development of ED or ADHD. Living in large families appears to increase the risk of receiving a CD, MR, or PDD diagnosis. Further research is warranted.

Order-disorder phenomenon in lead scandium tantalate

International Nuclear Information System (INIS)

Wang, H.C.; Schulze, W.A.

1990-01-01

Lead scandium tatalate (PST) is a ferroelectric relaxor with the perovskite structure of A(B'B double-prime)O 3 . By suitable heat treatment, the B-site cations can be brought from a structurally disordered state into various degree of ordering. The degree of ordering is strongly affected by the amount of vacancies present in the materials. To suppress PbO loss during the sintering or annealing process, a PbO-rich atmosphere is supplied by materials having high PbO vapor pressure, such as PbZrO 3 . For PST ceramics with nearly zero weight loss, very long annealing times and higher annealing temperatures are required for ordering. The higher PbO-loss materials are found to be easily ordered. The introduction of a reducing atmosphere during annealing enhances the ordering process. The ordering process is characterized quantitatively by X-ray diffraction and qualitatively by Raman spectroscopy

Overview of welding of oxide dispersion strengthened (ODS) alloys for advanced nuclear reactor applications

International Nuclear Information System (INIS)

Kalvala, Prasad Rao; Raja, K.S.; Misra, Manoranjan; Tache, Ricard A.

2009-01-01

Oxide dispersion strengthened (ODS) alloys are very promising materials for Generation IV reactors with a potential to be used at elevated temperatures under severe neutron exposure environment. Welding of the ODS alloys is an understudied problem. In this paper, an overview of welding of the ODS alloys useful for advanced nuclear reactor applications is presented. The microstructural changes and the resultant mechanical properties obtained by various solid state welding processes are reviewed. Based on our results on PM2000, an approach for future work on welding of the ODS alloys is suggested. (author)

Reactions of Three Lactones with Cl, OD, and O3

DEFF Research Database (Denmark)

Ausmeel, Stina; Andersen, C.; Nielsen, Ole John

2017-01-01

-methyl-γ-crotonolactone (3M-2(5H)-F) with Cl, OD, and O3 were investigated in a static chamber at 700 Torr and 298 ± 2 K. The relative rate method was used to determine kGVL+Cl = (4.56 ± 0.51) × 10-11, kGVL+OD = (2.94 ± 0.41) × 10-11, k2(5H)-F+Cl = (2.94 ± 0.41) × 10-11, k2(5H)-F+OD = (4.06 ± 0.073) × 10-12, k3M-2(5H......)-F+Cl = (16.1 ± 1.8) × 10-11, and k3M-2(5H)-F+OD = (12.6 ± 0.52) × 10-12, all rate coefficients in units of cm3 molecule-1 s-1. An absolute rate method was used to determine k2(5H)-F+O3 = (6.73 ± 0.18) × 10-20 and k3M-2(5H)-F+O3 = (5.42 ± 1.23) × 10-19 in units of cm3 molecule-1 s-1. Products were identified...

Development of ODS-Fe{sub 3}Al alloys

Energy Technology Data Exchange (ETDEWEB)

Wright, I.G.; Pint, B.A.; Tortorelli, P.F.; McKamey, C.G. [Oak Ridge National Lab., TN (United States)

1997-12-01

The overall goal of this program is to develop an oxide dispersion-strengthened (ODS) version of Fe{sub 3}Al that has sufficient creep strength and resistance to oxidation at temperatures in the range 1000 to 1200 C to be suitable for application as heat exchanger tubing in advanced power generation cycles. The main areas being addressed are: (a) alloy processing to achieve the desired alloy grain size and shape, and (b) optimization of the oxidation behavior to provide increased service life compared to semi-commercial ODS-FeCrAl alloys intended for the same applications. The recent studies have focused on mechanically-alloyed powder from a commercial alloy vendor. These starting alloy powders were very clean in terms of oxygen content compared to ORNL-produced powders, but contained similar levels of carbon picked up during the milling process. The specific environment used in milling the powder appears to exert a considerable influence on the post-consolidation recrystallization behavior of the alloy. A milling environment which produced powder particles having a high surface carbon content resulted in a consolidated alloy which readily recrystallized, whereas powder with a low surface carbon level after milling resulted in no recrystallization even at 1380 C. A feature of these alloys was the appearance of voids or porosity after the recrystallization anneal, as had been found with ORNL-produced alloys. Adjustment of the recrystallization parameters did not reveal any range of conditions where recrystallization could be accomplished without the formation of voids. Initial creep tests of specimens of the recrystallized alloys indicated a significant increase in creep strength compared to cast or wrought Fe{sub 3}Al, but the specimens failed prematurely by a mechanism that involved brittle fracture of one of the two grains in the test cross section, followed by ductile fracture of the remaining grain. The reasons for this behavior are not yet understood. The

Oxide Evolution in ODS Steel Resulting From Friction Stir Welding

Science.gov (United States)

2014-06-01

the SZ on both the AS and RS of 304L stainless steel , from [16]. ...........................................12  Figure 7.  Past research conditions...being done on void swelling and embrittlement effects. Reduced activation ferritic/ martensitic (RAFM) steels and oxide dispersion strengthened (ODS...growth by grain boundary pinning at higher temperatures. Another type of ODS steel is 9-Cr martensitic steel , which is not considered in this research

On the way to high resolution TEM characterization of dual ion beam irradiated ODS steels

International Nuclear Information System (INIS)

Hsiung, L.; Tumey, S.; Fluss, M. J.; King, W.; Marian, J.; Kuntz, J.; Dasher, B. El; Serruys, Y.; Willaime, F.; Kimura, A.

2009-01-01

Fission and fusion energy application of ODS steels while appearing promising requires that many key science issues be resolved. Among these issues are our incomplete understanding of the effect of irradiation on low-temperature fracture properties, the role of fusion relevant helium and hydrogen transmutation gases on the deformation and fracture of irradiated material at low and high temperatures, radiation-induced solute segregation and phase stability, mechanisms of swelling suppression in ODS steels, and the effects of radiation damage on localized deformation. While planning to focus on all these issues we are particularly interested in the atomic scale mechanism by which helium is mitigated by the nano scale particles. In order to obtain insight we are performing analytical transmission electron microscopy (AEM), high resolution electron microscopy (HRTEM) to investigate micro-structural and micro-compositional changes and property alterations of Fe-Cr ferritic/martensitic and ODS steels driven by temperature and ion-beam irradiation with Fe, H, and He. As a beginning to a collaboration between LLNL and CEA-Saclay, we have carried out an irradiation of four specimens, Fe, Fe14%Cr, and two ODS steels (14% Cr and 16% Cr) using the dual beam facility at CEA-Saclay (JANNuS). An Fe 8+ beam was implanted at 24 MeV and helium was implanted through a degrader wheel with energies between 1.7 MeV and 1.3 MeV. The nominal radiation parameters were 40 to 25 DPA, 10 to 25 appm He/DPA ratio, and specimen temperatures of ∼425 deg. C. Our goal is to compare the evolved microstructure with respect to the accumulation of helium at or near the particle matrix interface. Preparatory to this first study we have made many hi-resolution analyses of the nano-particles in the two ODS steels which serve as a base line for comparison with the TEM post irradiation examination reported here. These base line studies are reported separately at this conference. (author)

Long-range activation of Sox9 in Odd Sex (Ods) mice.

Science.gov (United States)

Qin, Yangjun; Kong, Ling-kun; Poirier, Christophe; Truong, Cavatina; Overbeek, Paul A; Bishop, Colin E

2004-06-15

The Odd Sex mouse mutation arose in a transgenic line of mice carrying a tyrosinase minigene driven by the dopachrome tautomerase (Dct) promoter region. The minigene integrated 0.98 Mb upstream of Sox9 and was accompanied by a deletion of 134 kb. This mutation causes female to male sex reversal in XX Ods/+ mice, and a characteristic eye phenotype of microphthalmia with cataracts in all mice carrying the transgene. Ods causes sex reversal in the absence of Sry by upregulating Sox9 expression and maintaining a male pattern of Sox9 expression in XX Ods/+ embryonic gonads. This expression, which begins at E11.5, triggers downstream events leading to the formation of a testis. We report here that the 134 kb deletion, in itself, is insufficient to cause sex reversal. We demonstrate that in Ods, the Dct promoter is capable of acting over a distance of 1 Mb to induce inappropriate expression of Sox9 in the retinal pigmented epithelium of the eye, causing the observed microphthalmia. In addition, it induces Sox9 expression in the melanocytes where it causes pigmentation defects. We propose that Ods sex reversal is due to the Dct promoter element interacting with gonad-specific enhancer elements to produce the observed male pattern expression of Sox9 in the embryonic gonads.

Age-hardening susceptibility of high-Cr ODS ferritic steels and SUS430 ferritic steel

Energy Technology Data Exchange (ETDEWEB)

Chen, Dongsheng, E-mail: chen.dongsheng85@gmail.com [Graduate School of Energy Science, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Kimura, Akihiko; Han, Wentuo; Je, Hwanil [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan)

2015-10-15

Highlights: • The role of oxide particles in α/α′ phase decomposition behavior; microstructure of phase decomposition observed by TEM. • The characteristics of ductility loss caused by age-hardening. • Correlation of phase decomposition and age-hardening explained by dispersion strengthened models. • Age-hardening susceptibility of ODS steels and SUS430 steel. - Abstract: The effect of aging on high-Cr ferritic steels was investigated with focusing on the role of oxide particles in α/α′ phase decomposition behavior. 12Cr-oxide dispersion strengthened (ODS) steel, 15Cr-ODS steel and commercial SUS430 steel were isothermally aged at 475 °C for up to 10,000 h. Thermal aging caused a larger hardening in SUS430 than 15Cr-ODS, while 12Cr-ODS showed almost no hardening. A characteristic of the ODS steels is that the hardening was not accompanied by the significant loss of ductility that was observed in SUS430 steel. After aging for 2000 h, SUS430 steel shows a larger ductile–brittle transition temperature (DBTT) shift than 15Cr-ODS steel, which suggests that the age-hardening susceptibility is lower in 15Cr-ODS steel than in conventional SUS430 steel. Thermal aging leaded to a large number of Cr-rich α′ precipitates, which were confirmed by transmission electron microscopy (TEM). Correlation of age-hardening and phase decomposition was interpreted by Orowan type strengthening model. Results indicate that oxide particles cannot only suppress ductility loss, but also may influence α/α′ phase decomposition kinetics.

Chemical engineering and structural and pharmacological characterization of the α-scorpion toxin OD1.

Science.gov (United States)

Durek, Thomas; Vetter, Irina; Wang, Ching-I Anderson; Motin, Leonid; Knapp, Oliver; Adams, David J; Lewis, Richard J; Alewood, Paul F

2013-01-01

Scorpion α-toxins are invaluable pharmacological tools for studying voltage-gated sodium channels, but few structure-function studies have been undertaken due to their challenging synthesis. To address this deficiency, we report a chemical engineering strategy based upon native chemical ligation. The chemical synthesis of α-toxin OD1 was achieved by chemical ligation of three unprotected peptide segments. A high resolution X-ray structure (1.8 Å) of synthetic OD1 showed the typical βαββ α-toxin fold and revealed important conformational differences in the pharmacophore region when compared with other α-toxin structures. Pharmacological analysis of synthetic OD1 revealed potent α-toxin activity (inhibition of fast inactivation) at Nav1.7, as well as Nav1.4 and Nav1.6. In addition, OD1 also produced potent β-toxin activity at Nav1.4 and Nav1.6 (shift of channel activation in the hyperpolarizing direction), indicating that OD1 might interact at more than one site with Nav1.4 and Nav1.6. Investigation of nine OD1 mutants revealed that three residues in the reverse turn contributed significantly to selectivity, with the triple OD1 mutant (D9K, D10P, K11H) being 40-fold more selective for Nav1.7 over Nav1.6, while OD1 K11V was 5-fold more selective for Nav1.6 than Nav1.7. This switch in selectivity highlights the importance of the reverse turn for engineering α-toxins with altered selectivity at Nav subtypes.

Void formation in ODS EUROFER produced by hot isostatic pressing

Energy Technology Data Exchange (ETDEWEB)

Ortega, Y.; Monge, M.A.; Munoz, A.; Leguey, T.; Pareja, R. [Madrid Univ. Carlos-3, Dept. de Fisica (Spain); Castro, V. de [Oxford Univ., Dept. of Materials (United Kingdom)

2007-07-01

Full text of publication follows: An obstacle in the development of oxide dispersion strengthened (ODS) steels for structural applications in fusion reactors is the toughness lack of the material produced by powder metallurgy and consolidated by hot isostatic pressing (HIP). In particular, ODS EUROFER steel with Y{sub 2}O{sub 3} particles appears to exhibit poor impact properties. To asses the capabilities of this material, it is necessary elucidate if its failure is an inherent characteristic of the production process that can not be mitigated by normalizing and tempering treatments. In order to investigate this particular point, the evolution of the structural defects retained in the ODS material during isochronal annealing has been probed by positron annihilation spectroscopy. The present study has been performed on bail milled EUROFER powders consolidated by HIP, containing 0.25 wt % Y{sub 2}O{sub 3} and without Y{sub 2}O{sub 3}. For comparison, un-milled EUROFER powder consolidated under identical conditions, and as-received EUROFER97 plate produced by Boehler AG have been also investigated. Samples from these four materials were isochronally annealed for 90 min up to 1323 K. Materials produced from milled powders had a longer positron lifetime than the one produced from un-milled powder or the EUROFER plate. In the material containing Y{sub 2}O{sub 3}, i.e. in ODS EUROFER, annealing above 723 K produced a continuous increase in the mean positron lifetime <{tau}> up to reach a maximum value of 208 ps after annealing at 1223 K. A similar annealing behavior was observed for Y{sub 2}O{sub 3}-free milled EUROFER (milled EUROFER), but the <{tau}> value steeply changed from {approx}160 ps at 823 K to {approx}200 ps after annealing at 1023 K. Subsequent anneals above this temperature produced meaningless changes in <{tau}>. The <{tau}> increase in milled EUROFER was accompanied by the intensity increase of a lifetime component of {approx}360 ps that is characteristic

STS-74 view of ODS from Payload Changout Room

Science.gov (United States)

1995-01-01

Workers at Launch Pad 39A are preparing to close the payload bay doors on the Space Shuttle Atlantis for its upcoming launch on Mission STS-74 and the second docking with the Russian Space Station Mir. Uppermost in the payload bay is the Orbiter Docking System (ODS), which also flew on the first docking flight between the Space Shuttle and MIR. Lowermost is the primary payload of STS-74, the Russian-built Docking Module. During the mission, the Docking Module will first be attached to ODS and then to Mir. It will be left attached to Mir to become a permanent extension that will afford adequate clearance between the orbiter and the station during future dockings. At left in the payload bay, looking like a very long pole, is the Canadian-built Remote Manipulator System arm that will be used by the crew to hoist the Docking Module and attach it to the ODS.

Marvel and DC Characters Inspired by Arachnids

Directory of Open Access Journals (Sweden)

Elidiomar Ribeiro Da-Silva

2014-12-01

Full Text Available This article compares arachnid-based Marvel and DC comics characters. The composition of a comic book character often has interesting ‘real-life’ influences. Given the strong connection between arachnids (especially spiders, scorpions and mites, all belonging to the zoological class 'Arachnida' and human beings it is not surprising that they have inspired many fictional characters. We recorded 84 Marvel Comics characters and 40 DC Comics characters, detailed in the dataset that accompanies the article (Da-Silva 2014. Most characters have been created recently, since the 1990s. Marvel has significantly more arachnid characters than DC. As for taxonomic classification, the characters were based mostly on spiders (zoological order 'Araneae'. Of the total characters, the majority are human beings, but an overwhelming number have at least some typical arachnid features. Villains (60.91% of total are significantly more numerous, considering the sum of the two publishers. Arachnids have bad reputation for being dangerous (Thorp and Woodson 1976; Ruppert and Barnes 1996. Since the public usually considers spiders, scorpions and mites “harmful” in general, we expected a larger contingent of villains. However, there was no statistical difference between the amount of villains and heroes in Marvel characters. It did not happen probably due to the success of one character: the Amazing Spider-Man.

Photodissociation of the OD radical at 226 and 243 nm

International Nuclear Information System (INIS)

Radenovic, Dragana C.; Roij, Andre J.A. van; Chestakov, Dmitri A.; Eppink, Andre T.J.B.; Meulen, J.J. ter; Parker, David H.; Loo, Mark P.J. van der; Groenenboom, Gerrit C.; Greenslade, Margaret E.; Lester, Marsha I.

2003-01-01

The photodissociation dynamics of state selected OD radicals has been examined at 243 and 226 nm using velocity map imaging to probe the angle-speed distributions of the D( 2 S) and O( 3 P 2 ) products. Both experiment and complementary first principle calculations demonstrate that photodissociation occurs by promotion of OD from high vibrational levels of the ground X 2 Π state to the repulsive 1 2 Σ - state

Energy basis of disasters and the cycles of order and disorder

International Nuclear Information System (INIS)

Alexander, J.F. Jr.

1978-01-01

A quantitative theory of cycles order and disorder was applied to the earth and evaluated to form an energy basis for the global cycles, surges, and disasters. Energy circuit language was used to diagram the world system and show a common pattern in the order--disorder processes. Storms, floods, forest fires, volcanic eruptions, earthquakes, urban fires, and wars were modeled as the catastrophic release of energy previously converged and stored. Released energy disordered and recycled material available to stimulate a new cycle of growth. Cascading of catastrophic processes of disasters was modeled with a world web. The feedback in the global energy web was provided by the control action of disaster pulses. The global model was presented in both diagrammatic and differential equation form with the energy flows and storages evaluated. Order--disorder models of the atmospheric, oceanic, biological, geological, and urban systems of earth were connected to form an energy convergence network. The global energy model was used to calculate energy quality factors (ratio of energy of one type generating energy of another type) for the earth's major energy transformations. The theory provided suggestions for land-use policy. Energy ratios that provide a quantitative basis for disaster planning can be developed for a local environment of pulsing energy. Possibilities were considered that cycles of order and disorder of the earth are synchronized by cycles of sunspots. Energy quality and pulse amplifier ratios of solar flares may be high enough to control many global cycles

Pros and Cons of Character Portrayals of Autism on TV and Film

Science.gov (United States)

Nordahl-Hansen, Anders; Øien, Roald A.; Fletcher-Watson, Sue

2018-01-01

Portrayals of characters with autism spectrum disorder (ASD) and/or with autistic traits on film and in TV-series are increasing. Such portrayals may contribute in increasing awareness of the condition but can also increase stereotypes. Thus, these character portrayals are subject to heated debate within the ASD-community, but also in the general…

High Velocity Oxidation and Hot Corrosion Resistance of Some ODS Alloys

Science.gov (United States)

Lowell, C. E.; Deadmore, D. L.

1977-01-01

Several oxide dispersion strengthened (ODS) alloys were tested for cyclic, high velocity, oxidation, and hot corrosion resistance. These results were compared to the resistance of an advanced, NiCrAl coated superalloy. An ODS FeCrAl were identified as having sufficient oxidation and hot corrosion resistance to allow potential use in an aircraft gas turbine without coating.

Order-disorder transition of vortex matter in Mg0.95B2

International Nuclear Information System (INIS)

Oliveira, A.A.M.; Sharma, P.A.; Hur, N.; Cheong, S-W.; Ortiz, W.A.

2008-01-01

Third-harmonic susceptibility has been employed to probe the order-disorder transition of vortex matter of a good-quality sample of MgB 2 with random disorder. In the major part of the temperature interval, the measured boundary line can be adjusted by a power-law function, in accordance with theoretical models for the melting of the ordered phase of a 3D vortex-glass. For larger temperatures, however, thermally-induced depinning anticipates disorder, which is also predictable for the vortex matter behavior of a clean system with small amounts of randomly distributed disorder, as is the case of the Mg 0.95 B 2 sample studied here

The association between bodily anxiety symptom dimensions and the scales of the Revised NEO Personality Inventory and the Temperament and Character Inventory

DEFF Research Database (Denmark)

Kristensen, Ann Suhl; Mortensen, Erik Lykke; Mors, Ole

2009-01-01

The association between anxiety disorders and different measures of personality has been extensively studied to further the understanding of etiology, course, and treatment, and to possibly prevent the development of anxiety disorders. We have proposed a hierarchical model of bodily anxiety...... symptoms with 1 second-order severity factor and 5 first-order factors: cardio-respiratory, gastro-intestinal, autonomic, vertigo, and tension. The aim of this study was to investigate whether personality traits were differentially related to distinct symptom subdimensions or exclusively related...... to the general severity factor. Structural equation modeling of data on 120 patients with a primary diagnosis of social phobia and 207 patients with a primary diagnosis of panic disorder was used to examine the association between anxiety symptom dimensions and the scales of the Temperament and Character...

Character profiles and life satisfaction.

Science.gov (United States)

Park, Hwanjin; Suh, Byung Seong; Kim, Won Sool; Lee, Hye-Kyung; Park, Seon-Cheol; Lee, Kounseok

2015-04-01

There is a surge of interest in subjective well-being (SWB), which concerns how individuals feel about their happiness. Life satisfaction tends to be influenced by individual psychological traits and external social factors. The aim of this study was to examine the relationship between individual character and SWB. Data from 3522 university students were analyzed in this study. Character profiles were evaluated using the Temperament and Character Inventory-Revised Short version (TCI-RS). Life satisfaction was assessed using the Satisfaction with Life Scale (SWLS). All statistical tests regarding the correlations between each character profile and life satisfaction were conducted using ANOVAs, t-tests, multiple linear regression models and correlation analyses. The creative (SCT) profile was associated with the highest levels of life satisfaction, whereas the depressive (sct) profile was associated with the lowest levels of life satisfaction. Additionally, high self-directedness, self-transcendence and cooperation were associated with high life satisfaction. The results of gender-adjusted multiple regression analysis showed that the effects of self-directedness were the strongest in the assessment of one's quality of life, followed by self-transcendence and cooperativeness, in that order. All of the three-character profiles were significantly correlated with one's quality of life, and the character profiles of TCI-RS explained 27.6% of life satisfaction in total. Among the three-character profiles, the self-directedness profile was most associated with life satisfaction. Our study was cross-sectional, and self-reported data from students at a single university were analyzed. The results of this study showed that, among the character profiles, the effects of self-directedness were the strongest for predicting life satisfaction. Copyright © 2014 Elsevier Inc. All rights reserved.

Local order and magnetism of amorphous and disordered solids

International Nuclear Information System (INIS)

Friedt, J.M.

1985-01-01

Some topics related with the magnetic properties and local order in amorphous and disordered solids studied by Moessbauer spectroscopy, EXAFS, static and dynamical susceptibilities are presented. (L.C.) [pt

Aggressive antisocial behaviors are related to character maturity in young Swedish violent offenders independent of ADHD

Directory of Open Access Journals (Sweden)

Thomas Nilsson

2016-11-01

Full Text Available Background: Antisocial personality and psychopathic traits have constantly been found to accompany criminal and aggressive behaviors, but little attention has been given to aspects of character maturity and its relation to such behaviors. The present study investigated 1 whether level of character maturity (low, medium, and high is associated with amount of aggressive antisocial behaviors and psychopathic traits in young men imprisoned for violent criminality, and 2 whether such an association is independent of coexisting attention deficit hyperactivity disorder (ADHD.Methods: Swedish males (N=270, aged 18-25 sentenced to prison for violent and/or sexual criminality in the western region of the Swedish Prison and Probation Service underwent a thorough clinical examination during their incarceration. Data on character maturity as measured by the character dimensions Self-Directedness and Cooperativeness of the Temperament and Character Inventory were available for n=148 subjects, and used to divide these offenders into three groups with low, medium, and high character maturity. These groups were then compared for variables reflecting criminal history, a DSM-IV diagnosis of ADHD, Conduct disorder (CD and substance use disorders (SUD, aggressive behaviors, and psychopathic traits.Results: Character maturity was consistently associated with less aggressive antisocial behaviors and psychopathic personality traits; the group with the highest character maturity showed; i a later age at onset of criminality, ii a smaller number of prior violent criminal acts, iii lower prevalences of ADHD, CD, and SUD, iv less self-rated and expert-rated aggressive behaviors, and v less psychopathic traits. The association between character maturity and aggressive behaviors/psychopathic personality traits remained even when ADHD was controlled for. The only exception was sexual criminality, where the group with the highest character maturity contained the largest amount

Order-disorder transition in nanoscopic semiconductor quantum rings

NARCIS (Netherlands)

Borrmann, P.; Harting, J.D.R.

2001-01-01

Using the path integral Monte Carlo technique we show that semiconductor quantum rings with up to six electrons exhibit a temperature, ring diameter, and particle number dependent transition between spin ordered and disordered Wigner crystals. Because of the small number of particles the transition

OD structures in crystallography - basic concepts

Czech Academy of Sciences Publication Activity Database

Ďurovič, S.; Hybler, Jiří

2006-01-01

Roč. 221, - (2006), s. 63-76 ISSN 0044-2968 R&D Projects: GA ČR GA205/03/0439 Institutional research plan: CEZ:AV0Z10100521 Keywords : OD structures * polytypism * cronstedtite * kermesite * Fourier synthesis Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.897, year: 2006

Estimating Bus Loads and OD Flows Using Location-Stamped Farebox and Wi-Fi Signal Data

Directory of Open Access Journals (Sweden)

Yuxiong Ji

2017-01-01

Full Text Available Electronic fareboxes integrated with Automatic Vehicle Location (AVL systems can provide location-stamped records to infer passenger boarding at individual stops. However, bus loads and Origin-Destination (OD flows, which are useful for route planning, design, and real-time controls, cannot be derived directly from farebox data. Recently, Wi-Fi sensors have been used to collect passenger OD flow information. But the data are insufficient to capture the variation of passenger demand across bus trips. In this study, we propose a hierarchical Bayesian model to estimate trip-level OD flow matrices and a period-level OD flow matrix using sampled OD flow data collected by Wi-Fi sensors and boarding data provided by fareboxes. Bus loads on each bus trip are derived directly from the estimated trip-level OD flow matrices. The proposed method is evaluated empirically on an operational bus route and the results demonstrate that it provides good and detailed transit route-level passenger demand information by combining farebox and Wi-Fi signal data.

Sol-gel open tubular ODS columns with reversed electroosmotic flow for capillary electrochromatography.

Science.gov (United States)

Hayes, J D; Malik, A

2001-03-01

Sol-gel chemistry was successfully used for the fabrication of open tubular columns with surface-bonded octadecylsilane (ODS) stationary-phase coating for capillary electrochromatography (OT-CEC). Following column preparations, a series of experiments were performed to investigate the performance of the sol-gel coated ODS columns in OT-CEC. The incorporation of N-octadecyldimethyl[3-(trimethoxysilyl)propyl]ammonium chloride as one of the sol-gel precursors played an important role in the electrochromatographic performance of the prepared columns. This chemical reagent possesses a chromatographically favorable, bonded ODS moiety, in conjunction with three methoxy groups allowing for sol-gel reactivity. In addition, a positively charged nitrogen atom is present in the molecular structure of this reagent and provides a positively charged capillary surface responsible for the reversed electroosmotic flow (EOF) in the columns during CEC operation. Comparative studies involving the EOF within such sol-gel ODS coated and uncoated capillaries were performed using acetonitrile and methanol as the organic modifiers in the mobile phase. The use of a deactivating reagent, phenyldimethylsilane, in the sol-gel solution was evaluated. Efficiency values of over 400,000 theoretical plates per meter were achieved in CEC on a 64 cm x 25 microm i.d. sol-gel ODS open tubular column. Test mixtures of polycyclic aromatic hydrocarbons, benzene derivatives, and aromatic aldehydes and ketones were used to evaluate the CEC performances of both nondeactivated and deactivated open tubular sol-gel columns. The effects of mobile-phase organic modifier contents and pH on EOF in such columns were evaluated. The prepared sol-gel ODS columns are characterized by switchable electroosmotic flow. A pH value of approximately 8.5 was found correspond to the isoelectric point for the prepared sol-gel ODS coatings.

Evaluation of ODS-AQ stationary phase for use in capillary electrochromatography.

Science.gov (United States)

Djordjevic, N M; Fitzpatrick, F; Houdiere, F

2001-04-01

The aim of this study was to evaluate the applicability of ODS-AQ packing material as a stationary phase in capillary electrochromatography (CEC). The electroosmotic flow created on an ODS-AQ stationary phase was measured at different mobile phase compositions and at different column temperatures. It was observed that the electroosmotic flow generated in the column increased by 50% when the temperature of the system was raised from 20 degrees C to 60 degrees C, while all other conditions were kept constant. The electroosmotic flow produced by the ODS-AQ stationary phase was found to be comparable to the flow generated in a column packed with Nucleosil bare-silica material. In addition, a set of polar compounds (D-lysergic acid diethylamide derivatives) was utilized to determine the influence of temperature and mobile phase composition on their chromatographic behavior on an ODS-AQ stationary phase in a CEC mode. A linear relationship between the solute retention factor and column temperatures was seen over the temperature range studied (20 degrees C to 60 degrees C). A quadratic function was used to describe the changes in the solute retention factors with variation of acetonitrile concentration in the mobile phase.

Infinitely robust order and local order-parameter tulips in Apollonian networks with quenched disorder

Science.gov (United States)

Kaplan, C. Nadir; Hinczewski, Michael; Berker, A. Nihat

2009-06-01

For a variety of quenched random spin systems on an Apollonian network, including ferromagnetic and antiferromagnetic bond percolation and the Ising spin glass, we find the persistence of ordered phases up to infinite temperature over the entire range of disorder. We develop a renormalization-group technique that yields highly detailed information, including the exact distributions of local magnetizations and local spin-glass order parameters, which turn out to exhibit, as function of temperature, complex and distinctive tulip patterns.

Evaluation of Ion Irradiation Behavior of ODS Alloys

Energy Technology Data Exchange (ETDEWEB)

Jang, Jin Sung; Kim, Min Chul; Hong, Jun Hwa; Han, Chang Hee; Chang, Young Mun; Bae, Chang Soo; Bae, Yoon Young; Chang, Moon Hee

2006-08-15

FM steel (Grade 92) and ODS alloy(MA956) specimens were ion irradiated with 122 MeV Ne ions. Irradiation temperatures were about 450 and 550 .deg. C and the peak dose was 1, 5, and 10 dpa. Cross-sectional TEM samples were prepared by the electrolytic Ni-plating after pre-treatment of the irradiated specimens. Irradiation cavities in FM steel and ODS alloy specimens were not much different in size; about 20 nm in diameter in both specimens irradiated at around 450 .deg. C. However, the size distribution of cavities in FM steel specimens was broader than that in ODS alloy specimen, indicating that the cavity growth probably via coalescence). It was noticeable that the location and the preferential growth of the cavities in FM steel specimens: cavities on the PAGB (prior austenite grain boundary) was significantly larger than those within the grains. This could be an important issue for the mechanical properties, especially high temperature creep, fracture toughness, and so on. The dependency of the dose threshold and swelling on the ratio of the inert gas concentration/dpa was analysed for the various irradiation source, including He, Ne, Fe/He, and fast neutron, and the empirical correlation was established.

Evaluation of Ion Irradiation Behavior of ODS Alloys

International Nuclear Information System (INIS)

Jang, Jin Sung; Kim, Min Chul; Hong, Jun Hwa; Han, Chang Hee; Chang, Young Mun; Bae, Chang Soo; Bae, Yoon Young; Chang, Moon Hee

2006-08-01

FM steel (Grade 92) and ODS alloy(MA956) specimens were ion irradiated with 122 MeV Ne ions. Irradiation temperatures were about 450 and 550 .deg. C and the peak dose was 1, 5, and 10 dpa. Cross-sectional TEM samples were prepared by the electrolytic Ni-plating after pre-treatment of the irradiated specimens. Irradiation cavities in FM steel and ODS alloy specimens were not much different in size; about 20 nm in diameter in both specimens irradiated at around 450 .deg. C. However, the size distribution of cavities in FM steel specimens was broader than that in ODS alloy specimen, indicating that the cavity growth probably via coalescence). It was noticeable that the location and the preferential growth of the cavities in FM steel specimens: cavities on the PAGB (prior austenite grain boundary) was significantly larger than those within the grains. This could be an important issue for the mechanical properties, especially high temperature creep, fracture toughness, and so on. The dependency of the dose threshold and swelling on the ratio of the inert gas concentration/dpa was analysed for the various irradiation source, including He, Ne, Fe/He, and fast neutron, and the empirical correlation was established

Fabrication and characterization of reference 9Cr and 12Cr-ODS low activation ferritic/martensitic steels

Energy Technology Data Exchange (ETDEWEB)

Muroga, T., E-mail: muroga@nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Nagasaka, T. [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Li, Y.; Abe, H. [Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577 (Japan); Ukai, S. [Graduate School of Engineering, Hokkaido University, N13, W8, Kita-ku, Sapporo 060-8628 (Japan); Kimura, A. [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Okuda, T. [Kobelco Research Institute, 1-5-5 Takatsukadai, Nishi-ku, Kobe, Hyogo 651-2271 (Japan)

2014-10-15

For the purpose of arranging reference alloys available for various characterization efforts by Japanese fusion research groups, fabrication of reference 9Cr and 12Cr-ODS steels have been carried out with similar manufacturing processes followed by various characterizations. The fabrication proceeded with powder mixing, MA, encapsulation into mild steel cases, hot extrusion and hot forging, followed by final heat treatments. Each alloy was extruded into three bars. The characterization included chemical composition analysis, SEM and TEM microstructural observations, hardness tests, tensile tests at RT and 973 K, and relatively short-term thermal creep tests at 973 K. Room temperature hardness for 9Cr-ODS was larger than 12Cr-ODS, the former showing large increase when annealing temperature exceeded 1200 K and the latter showing no significant change with annealing temperature. Tensile strength of 9Cr-ODS was significantly larger than that of 12Cr-ODS at RT but comparable at 973 K. 9Cr-ODS showed longer and shorter creep rupture time than 12Cr-ODS at high and low stress levels, respectively. The mechanism of the difference in creep properties of the two alloys was discussed.

Growth mechanisms of oxide scales on ODS alloys in the temperature range 1000-1100deg C

International Nuclear Information System (INIS)

Quadakkers, W.J.

1990-01-01

After a short overview of the production, microstructure and mechanical properties of nickel- and iron-based oxide dispersion strengthened (ODS) alloys, the oxidation properties of this class of materials is extensively discussed. The excellent oxidation resistance of ODS alloys is illustrated by comparing their behaviour with conventional chromia and alumina forming wrought alloys of the same base composition. ODS alloys exhibit improved scale adherence, decreased oxide growth rates, enhanced selective oxidation and decreased oxide grain size compared to corresponding non-ODS alloys. It is shown, that these experimental observations can be explained by a change in oxide growth mechanism. The presence of the oxide dispersion reduces cation diffusion in the scale, causing the oxides on the ODS alloys to grow mainly by oxygen grain boundary transport. As oxide grain size increases with time, the oxide growth kinetics obey a sub-parabolic time dependence especially in the case of the alumina forming iron-based ODS alloy. (orig.) [de

Oxidation behavior of austenitic iron-base ODS alloy in supercritical water

Energy Technology Data Exchange (ETDEWEB)

Behnamian, Y.; Dong, Z.; Zahiri, R.; Kohandehghan, A.; Mitlin, D., E-mail: behnamia@ualberta.ca, E-mail: zdong@ualberta.ca, E-mail: kohandeh@ualberta.ca, E-mail: rzahiris@ualberta.ca, E-mail: dave.mitlin@ualberta.ca [Univ. of Alberta, Edmondon, AB (Canada); Zhou, Z., E-mail: zhouzhj@mater.ustb.edu.cn [Univ. of Science and Tech. Beijing, Beijing (China); Chen, W.; Luo, J., E-mail: weixing.chen@ualberta.ca, E-mail: Jingli.luo@ualberta.ca [Univ. of Alberta, Edmonton, AB (Canada); Zheng, W., E-mail: wenyue@nrcan.gc.ca [Natural Resources Canada, Canmet MATERIALS, Hamilton, ON (Canada); Guzonas, D. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

2014-07-01

In this study, the effect of exposure time on the corrosion of the 304 stainless steel based oxide dispersion strengthened alloy, SS304ODS, in supercritical water was investigated at 650 {sup o}C with constant dissolved oxygen concentration. The results show that the oxidation of SS304ODS in supercritical water followed a parabolic law at 650 {sup o}C. Discontinuous oxide scale with two distinct layers has formed after 550 hours. The inner layer was chromium-rich while the outer layer was iron-rich (Magnetite). The oxide islands grow with increasing the exposure time. With increasing exposure time, the quantity of oxide islands increased in which major preferential growth along oxide-substrate interface was observed. The possible mechanism of SS304ODS oxidation in supercritical water was also discussed. (author)

Emasculation of male characters as seen through Sula by Toni Morrison

Directory of Open Access Journals (Sweden)

Ferdinand KPOHOUE

2018-03-01

Full Text Available Emasculation is a drawback of slavery as it was practiced in the Americas. Men are limited in their power in order to be exploited without strong reactions. This aspect appears in Sula where female characters play the main roles. Male characters are shaped to be absent, irresponsible or insane. Female characters take care of the household and fight for their own survival. Children are educated by the female characters, male characters are regularly absent, some of them have deserted the household. The objective of this paper is to explain, through the emasculation system, the behaviors of some male characters such as Shadrack, Plum Peace, BoyBoy, Jude and Ajax (Albert Jacks in Sula in order to provide deeper understanding to Toni Morrison’s skills to deal with the conditions of Blacks in the South of the USA.  This can help to understand more Sula which is deeply rooted in the black community with its traditions and realities.

Void formation in ODS EUROFER produced by hot isostatic pressing

International Nuclear Information System (INIS)

Ortega, Y.; Monge, M.A.; Castro, V. de; Munoz, A.; Leguey, T.; Pareja, R.

2009-01-01

Positron annihilation experiments were performed on oxide dispersion strengthened (ODS) and non-ODS EUROFER prepared by mechanical alloying and hot isostatic pressing. The results revealed the presence of small voids in these materials in the as-HIPed conditions. Their evolution under isochronal annealing experiments was investigated. The coincidence Doppler broadening spectra of ODS EUROFER exhibited a characteristic signature attributed to positron annihilation in Ar-decorated voids at the oxide particle/matrix interfaces. The variation of the positron annihilation parameters with the annealing temperature showed three stages: up to 623 K, between 823 and 1323 K, and above 1323 K. In the temperature range 823-1323 K void coarsening had effect. Above 1323 K some voids annealed out, but others, associated to oxide particles and small precipitates, survived to annealing at 1523 K. Transmission electron microscopy observations were also performed to verify the characteristics of the surviving defects after annealing at 1523 K.

Void formation in ODS EUROFER produced by hot isostatic pressing

Energy Technology Data Exchange (ETDEWEB)

Ortega, Y. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)], E-mail: yanicet@fis.ucm.es; Monge, M.A. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain); Castro, V. de [Department of Materials, University of Oxford, Oxford OX1 3PH (United Kingdom); Munoz, A.; Leguey, T.; Pareja, R. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)

2009-04-30

Positron annihilation experiments were performed on oxide dispersion strengthened (ODS) and non-ODS EUROFER prepared by mechanical alloying and hot isostatic pressing. The results revealed the presence of small voids in these materials in the as-HIPed conditions. Their evolution under isochronal annealing experiments was investigated. The coincidence Doppler broadening spectra of ODS EUROFER exhibited a characteristic signature attributed to positron annihilation in Ar-decorated voids at the oxide particle/matrix interfaces. The variation of the positron annihilation parameters with the annealing temperature showed three stages: up to 623 K, between 823 and 1323 K, and above 1323 K. In the temperature range 823-1323 K void coarsening had effect. Above 1323 K some voids annealed out, but others, associated to oxide particles and small precipitates, survived to annealing at 1523 K. Transmission electron microscopy observations were also performed to verify the characteristics of the surviving defects after annealing at 1523 K.

Comparative study between two animal models of extrapyramidal movement disorders: prevention and reversion by pecan nut shell aqueous extract.

Science.gov (United States)

Trevizol, Fabiola; Benvegnú, Dalila M; Barcelos, Raquel C S; Pase, Camila S; Segat, Hecson J; Dias, Verônica Tironi; Dolci, Geisa S; Boufleur, Nardeli; Reckziegel, Patrícia; Bürger, Marilise E

2011-08-01

Acute reserpine and subchronic haloperidol are animal models of extrapyramidal disorders often used to study parkinsonism, akinesia and tardive dyskinesia. In humans, these usually irreversible and disabling extrapyramidal disorders are developed by typical antipsychotic treatment, whose pathophysiology has been related to oxidative damages development. So far, there is no treatment to prevent these problems of the psychiatric clinic, and therefore further studies are needed. Here we used the animal models of extrapyramidal disorders cited above, which were performed in two distinct experiments: orofacial dyskinesia (OD)/catalepsy induced by acute reserpine and subchronic haloperidol after (experiment 1) and before (experiment 2) oral treatment with pecan shell aqueous extract (AE), a natural and promissory antioxidant. When administered previously (exp.1), the AE prevented OD and catalepsy induced by both reserpine and haloperidol. When reserpine and haloperidol were administered before the extract (exp.2), the animals developed OD and catalepsy all the same. However, the orofacial parameter (but not catalepsy) in both animal models was reversed after 7 and 14 days of AE treatment. These results indicate that, acute reserpine and subchronic haloperidol administrations induced similar motor disorders, although through different mechanisms, and therefore are important animal models to study the physiopathology of extrapyramidal disorders. Comparatively, the pecan shell AE was able to both prevent and reverse OD but only to prevent catalepsy. These results reinforce the role of oxidative stress and validate the two animal models used here. Our findings also favor the idea of prevention of extrapyramidal disorders, rather than their reversal. Copyright © 2011 Elsevier B.V. All rights reserved.

Influence of Zr addition on the microstructures and mechanical properties of 14Cr ODS steels

Energy Technology Data Exchange (ETDEWEB)

Zhang, Liye [State Key Lab of Hydraulic Engineering Simulation and Safety, Tianjin key Lab of Composite and Functional Materials, Tianjin University, Tianjin 300072 (China); Yu, Liming, E-mail: lmyu@tju.edu.cn [State Key Lab of Hydraulic Engineering Simulation and Safety, Tianjin key Lab of Composite and Functional Materials, Tianjin University, Tianjin 300072 (China); Liu, Yongchang; Liu, Chenxi; Li, Huijun [State Key Lab of Hydraulic Engineering Simulation and Safety, Tianjin key Lab of Composite and Functional Materials, Tianjin University, Tianjin 300072 (China); Wu, Jiefeng [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

2017-05-17

Oxide dispersion strengthened (ODS) steel is one of the most promising candidate structural materials for the high-temperature nuclear reactor application. In this study, two compositions of ODS steels (14Cr-ODS and 14Cr-Zr-ODS) were prepared to investigate the influence of Zr addition on the microstructures and mechanical properties of ODS steels. The microstructures, including dispersion morphology and crystal structures of oxide particles, particle-matrix interface coherency and particle-dislocation interactions, were characterized using TEM, HRTEM, and SEM, and the mechanical properties at room and high temperatures were measured using uniaxial tensile tests. Results show that Zr addition leads to the formation of finer precipitated particles, which was identified as rhombohedral Y{sub 4}Zr{sub 3}O{sub 12}, with denser dispersion in the matrix. The calculation results reveal that the lattice misfit, δ, at the interface between particle and matrix increases as the particle size increases. In addition, the strength and elongation of ODS steels are improved with Zr addition due to the stronger interface bonding force between fine particles and matrix as well as the larger pinning effect of small particles to dislocation movements.

A major locus on mouse chromosome 18 controls XX sex reversal in Odd Sex (Ods) mice.

Science.gov (United States)

Qin, Yangjun; Poirier, Christophe; Truong, Cavatina; Schumacher, Armin; Agoulnik, Alexander I; Bishop, Colin E

2003-03-01

We have previously reported a dominant mouse mutant, Odd sex (Ods), in which XX Ods/+ mice on the FVB/N background show complete sex reversal, associated with expression of Sox9 in the fetal gonads. Remarkably, when crossed to the A/J strain approximately 95% of the (AXFVB) F(1) XX Ods/+ mice developed as fully fertile, phenotypic females, the remainder developing as males or hermaphrodites. Using a (AXFVB) F(2) population, we conducted a genome-wide linkage scan to identify the number and chromosomal location of potential Ods modifier genes. A single major locus termed Odsm1 was mapped to chromosome 18, tightly linked to D18Mit189 and D18Mit210. Segregation at this locus could account for the presence of sex reversal in 100% of XX Ods/+ mice which develop as males, for the absence of sex reversal in approximately 92% of XX Ods/+ mice which develop as females, and for the mixed sexual phenotype in approximately 72% of XX Ods/+ mice that develop with ambiguous genitalia. We propose that homozygosity for the FVB-derived allele strongly favors Ods sex reversal, whereas homozygosity for the A/J-derived allele inhibits it. In mice heterozygous at Odsm1, the phenotypic outcome, male, female or hermaphrodite, is determined by a complex interaction of several minor modifying loci. The close proximity of Smad2, Smad7 and Smad4 to D18Mit189/210 provides a potential mechanism through which Odsm1 might act.

Activation volume of martensitic ODS steel

Energy Technology Data Exchange (ETDEWEB)

Kim, D. W.; Noh, S.; Kim, T. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Apparent activation volume as a function of temperature is 86b{sup 3}-42b{sup 3}. Activation volume decreases with increasing temperature. Activation volume changes scarcely with decreasing strain rate. Strain rate sensitivity increases with increasing temperature and decreasing strain rate. Nano-sized oxide dispersion strengthened (ODS) martensitic steel has a high strength, low thermal expansion coefficient, high thermal conductivity, and a good swelling resistance. Martensitic ODS steel is a candidate material for fuel cladding of sodium cooled fast breeder reactor (SFR). The plastic flow stress is determined through the interaction of dislocations with the obstacles encountered inside lattice. Dislocation movement through the lattice or past an obstacle requires surmounting of the energy barrier by a combination of applied stress and thermal activation. The plastic deformation of materials is a thermally activated process dependent upon time, temperature, and strain rate. Characterization of the rate controlling mechanism for plastic deformation due to dislocation motion in crystalline materials is done by the assessment of activation volume based on thermal activation analysis.

Role of enterocele in the obstructed defecation syndrome (ODS): a new radiological point of view.

Science.gov (United States)

Morandi, C; Martellucci, J; Talento, P; Carriero, A

2010-08-01

The aim of this study was to understand the role of enterocele in the pathogenesis of the obstructed defecation syndrome (ODS) a new defecographic classification based on function. A total of 597 patients (551 women, 46 men) who underwent cinedefecography between November 2001 and November 2005 were studied. A total of 567 (95%) underwent cinedefecography as they had symptoms of ODS. Enterocele was classified into three types. Enterocele was found in 127 (23%) female and one (2.2%) male patients. Thirty-eight (6.9%) patients had type A, 38(6.9%) type B, and 27(4.9%) type C enterocele. A total of 24 patients (4.35%) had sigmoidocele. In patients with type C enterocele, the finding of a radiological pattern of ODS was higher (26/27) than that in the other groups (A + B + Sigmoidocele) (23/100) (P ODS and usually presents as an isolated condition. Type B is less frequently associated with ODS and is more frequently accompanied by other pathological conditions.

DeepCNF-D: Predicting Protein Order/Disorder Regions by Weighted Deep Convolutional Neural Fields

Directory of Open Access Journals (Sweden)

Sheng Wang

2015-07-01

Full Text Available Intrinsically disordered proteins or protein regions are involved in key biological processes including regulation of transcription, signal transduction, and alternative splicing. Accurately predicting order/disorder regions ab initio from the protein sequence is a prerequisite step for further analysis of functions and mechanisms for these disordered regions. This work presents a learning method, weighted DeepCNF (Deep Convolutional Neural Fields, to improve the accuracy of order/disorder prediction by exploiting the long-range sequential information and the interdependency between adjacent order/disorder labels and by assigning different weights for each label during training and prediction to solve the label imbalance issue. Evaluated by the CASP9 and CASP10 targets, our method obtains 0.855 and 0.898 AUC values, which are higher than the state-of-the-art single ab initio predictors.

Virtual Character Personality Influences Participant Attitudes and Behavior - An Interview with a Virtual Human Character about Her Social Anxiety

Directory of Open Access Journals (Sweden)

Xueni ePan

2015-02-01

Full Text Available We introduce a novel technique for the study of human-virtual character interaction in immersive virtual reality. The human participants verbally administered a standard questionnaire about social anxiety to a virtual female character, that responded to each question through speech and body movements. The purpose was to study the extent to which participants responded differently to characters that exhibited different personalities, even though the verbal content of their answers was always the same. A separate online study provided evidence that our intention to create two different personality types had been successful. In the main between-groups experiment that utilized a Cave system there were 24 male participants, where 12 interacted with a female virtual character portrayed to exhibit shyness and the remaining 12 with an identical but more confident virtual character. Our results indicate that although the content of the verbal responses of both virtual characters was the same, participants showed different subjective and behavioral responses to the two different personalities. In particular participants evaluated the shy character more positively, for example, expressing willingness to spend more time with her. Participants evaluated the confident character more negatively and waited for a significantly longer time to call her back after she had left the scene in order to answer a telephone call. The method whereby participants interviewed the virtual character allowed naturalistic conversation while avoiding the necessity of speech processing and generation, and natural language understanding. It is therefore a useful method for the study of the impact of virtual character personality on participant responses.

The filler powders laser welding of ODS ferritic steels

Energy Technology Data Exchange (ETDEWEB)

Liang, Shenyong, E-mail: s_y_liang@126.com; Lei, Yucheng; Zhu, Qiang

2015-01-15

Laser welding was performed on Oxide Dispersion Strengthened (ODS) ferritic steel with the self-designed filler powders. The filler powders were added to weld metal to produce nano-particles (Y–M–O and TiC), submicron particles (Y–M–O) and dislocation rings. The generated particles were evenly distributed in the weld metal and their forming mechanism and behavior were analyzed. The results of the tests showed that the nano-particles, submicron particles and dislocation rings were able to improve the micro-hardness and tensile strength of welded joint, and the filler powders laser welding was an effective welding method of ODS ferritic steel.

A Modified Back propagation Algorithm for Optical Character Recognition

OpenAIRE

Jitendra Shrivastav; Prof. Ravindra Kumar Gupta; Dr. Shailendra Singh

2013-01-01

Character Recognition (CR) has been an active area of research and due to its diverse applicable environment; it continues to be a challenging research topic. There is a clear need for optical character recognition in order to provide a fast and accurate method to search both existing images as well as large archives of existing paper documents. However, existing optical character recognition programs suffer from a flawed tradeoff between speed and accuracy, making it less attractive for larg...

Dietary docosahexaenoic acid-induced generation of liver lipid peroxides is not suppressed further by elevated levels of glutathione in ODS rats.

Science.gov (United States)

Sekine, Seiji; Kubo, Kazuhiro; Tadokoro, Tadahiro; Saito, Morio

2006-04-01

We examined the effects of ascorbic acid (AsA) and glutathione (GSH; experiment 1) and of GSH in acetaminophen-fed rats (experiment 2) on dietary docosahexaenoic acid (DHA)-induced tissue lipid peroxidation. In experiment 1, AsA-requiring Osteogenic Disorder Shionogi/Shi-od/od (ODS) rats were fed soybean protein diets containing DHA (10.0% total energy) and AsA at 50 (low) or 300 (normal) mg/kg without (low) or with (normal) methionine at 2 g/kg for 32 d. In experiment 2, ODS rats were fed diets containing DHA (7.8% total energy) and acetaminophen (4 g/kg) with different levels of dietary methionine (low, moderate, high, and excessive at 0, 3, 6, and 9 g/kg, respectively) for 30 d. Tissue lipid peroxides and antioxidant levels were determined. In experiment 1, liver lipid peroxide levels in the low-AsA group were lower than those in the normal-AsA group, but kidney and testis lipid peroxide levels in the low-AsA group were higher than those in the normal-AsA group. Dietary methionine tended to decrease tissue lipid peroxide levels but did not decrease vitamin E (VE) consumption. In experiment 2, a high level of methionine (6 g/kg) decreased liver lipid peroxide levels and VE consumption. However, generation of tissue lipid peroxides and VE consumption were not decreased further by a higher dose of methionine (9 g/kg). Higher than normal levels of dietary methionine are not necessarily associated with decreased dietary DHA-induced generation of tissue lipid peroxides and VE consumption except that the GSH requirement is increased in a condition such as acetaminophen feeding.

Isotope effects in the photofragmentation of symmetric molecules: The branching ratio of OD/OH in water

DEFF Research Database (Denmark)

Henriksen, Niels Engholm; Møller, Klaus Braagaard; Engel, Volker

2005-01-01

With HOD initially in its vibrational ground state, we present a new detailed interpretation of the OD/OH branching ratio (similar to 3) in the photoinduced process D+OH H+OD, in the first absorption band. Using semiclassical arguments, we show that the branching ratio has little to do...... with the initial distribution of configurations, but the initial momentum distribution plays a key role in determination of the branching ratio. The formation of D+OH arises from initial situations where OD is stretching, and it stretches faster than OH, whereas all other motions lead to H+OD. This picture...

Phase transition type change in order-order and order-disorder transformations of LaH2+c-like superstoichiometric dihydrides

International Nuclear Information System (INIS)

Ratishvili, I.G.

1999-01-01

Phase transformations in metal-hydrogen systems associated with the ordering processes in the subsystem of interstitial hydrogen atoms are considered. It is shown that in a particular class of superstoichiometric rare-earth dihydrides, where the ordering subsystem is characterized by two long-range-order parameters η 1 , η 2 and the energy parameter p 0 (1) (p) ≤ c ≤ c 0 (2) (p), it becomes discontinuous outside of this region. Dependence of critical concentrations c 0 (1) and c 0 (2) upon the energy parameter p is deduced. It is shown, as well, that there exists a second sequence of critical concentrations, c 1 (1) (p) and c 1 (2) (p), denoting the boundaries between the regions of continuous and discontinuous order-disorder transformations. (orig.)

Influence of Normalizing Temperature on the Microstructure and Hardness of 9Cr-1Mo ODS Steel

Energy Technology Data Exchange (ETDEWEB)

Jang, Ki Nam; Kim, Tae Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Kyu Tae [Dongguk University, Gyeongju (Korea, Republic of)

2016-10-15

Oxide dispersion strengthened(ODS) steel has superior high-temperature strength and creep properties because fine oxide particles having an excellent stability at high temperatures are uniformly distributed in the matrix. ODS steel has being developed for structure materials of sodium fast cooled reactor(SFR) because of its excellent irradiation resistance and mechanical properties. 9Cr-1Mo ODS steel has better high temperature strength and irradiation resistance than common 9Cr-1Mo steel because Y{sub 2}O{sub 3} nano-sized particles which interrupt dislocation movement and grain boundary slip are uniformly dispersed in the martensite matrix. The mechanical properties of the ODS steels are mainly determined by their microstructures, and the microstructure is considerably decided by the heat-treatment conditions. This study focused on the effect of normalizing temperature on microstructure and hardness of 9Cr-1Mo martensitic ODS steel so as to optimize the heat-treatment condition. In this study, the effect of normalizing temperature on mechanical property and microstructures of 9Cr-1Mo martensitic ODS steel was investigated. It was shown that the microhardness was steadily increased with increasing of the normalizing temperature. According to TEM observation, mechanical property of 9Cr-1Mo ODS steel was significantly affected by lath width. These observations, could be useful to understand the relationship between normalizing temperature and microstructure.

Effect of irradiation temperature on microstructure of ferritic-martensitic ODS steel

Science.gov (United States)

Klimenkov, M.; Lindau, R.; Jäntsch, U.; Möslang, A.

2017-09-01

The EUROFER-ODS alloy with 0.5% Y2O3 was neutron irradiated with doses up to 16.2 dpa at 250 °C, 350 °C and 450 °C. The radiation induced changes in the microstructure (e.g. dislocation loops and voids) were investigated using transmission electron microscopy (TEM). The number density of radiation induced defects was found to be significantly lower than in EUROFER 97 irradiated at the same conditions. It was found that the appearance and extent of radiation damage strongly depend not only on the irradiation temperature but also on the local number density and size distribution of ODS particles. The higher number density of dislocation loops and voids was found in the local areas with low number density of ODS particles. The interstitial loops with Burgers vector of both ½ and types were detected by imaging using different diffraction conditions.

Influences of process parameters and microstructure on the fracture mechanisms of ODS steels

International Nuclear Information System (INIS)

Rouffié, A.L.; Wident, P.; Ziolek, L.; Delabrouille, F.; Tanguy, B.; Crépin, J.; Pineau, A.; Garat, V.; Fournier, B.

2013-01-01

The present work investigates the impact response of three ODS steels containing 9%Cr and 14%Cr. These steels were produced by hot extrusion in the shapes of a rod and a plate. The 9%Cr ODS steel has a quasi-isotropic microstructure and is given as a reference material. In comparison, the 14%Cr ODS steel has a strong morphological and crystallographic texture given by the process route. The impact behaviour is anisotropic and the fracture energies are higher when the material is tested in the longitudinal direction compared to the transverse direction. Moreover, the 14%Cr ODS steel has a better impact behaviour when it is extruded in the shape of a rod rather than in the shape of a plate. This work focuses on the fracture mechanisms involved in the ductile to brittle transition regime and in the brittle regime of these materials. In the case of the 14%Cr ODS steel, the cleavage facets observed at very low temperature are much larger than the actual size of the grains. Packets of grains with less than 15° of internal misorientation were defined as effective grains for cleavage. In the transition range, the texture enhances intergranular delamination on the 14%Cr rod material. The occurrence of delamination consumes a lot of energy and tends to enhance scattering in impact energies

Influences of process parameters and microstructure on the fracture mechanisms of ODS steels

Energy Technology Data Exchange (ETDEWEB)

Rouffié, A.L., E-mail: anne-laure.rouffie@cea.fr [CEA, DEN, DANS, DMN, SRMA, Bât 453, F-91191 Gif-sur-Yvette (France); Wident, P.; Ziolek, L. [CEA, DEN, DANS, DMN, SRMA, Bât 453, F-91191 Gif-sur-Yvette (France); Delabrouille, F. [EDF – EDF R and D, Département MMC groupe Métallurgie, 77818 Moret sur Loing (France); Tanguy, B. [CEA, DEN, DANS, DMN, SEMI, Bât 625, F-91191 Gif-sur-Yvette (France); Crépin, J.; Pineau, A. [Mines ParisTech, Centre des Matériaux PM Fourt, UMR CNRS 7633, BP 87, 91003 Evry (France); Garat, V. [AREVA NP, 10 rue J. Récamier, 69006 Lyon (France); Fournier, B. [Manoir Industries, Metallurgy Dept., 12 rue des Ardennes, BP 8401 Pîtres, 27108 Val de Reuil Cedex (France)

2013-02-15

The present work investigates the impact response of three ODS steels containing 9%Cr and 14%Cr. These steels were produced by hot extrusion in the shapes of a rod and a plate. The 9%Cr ODS steel has a quasi-isotropic microstructure and is given as a reference material. In comparison, the 14%Cr ODS steel has a strong morphological and crystallographic texture given by the process route. The impact behaviour is anisotropic and the fracture energies are higher when the material is tested in the longitudinal direction compared to the transverse direction. Moreover, the 14%Cr ODS steel has a better impact behaviour when it is extruded in the shape of a rod rather than in the shape of a plate. This work focuses on the fracture mechanisms involved in the ductile to brittle transition regime and in the brittle regime of these materials. In the case of the 14%Cr ODS steel, the cleavage facets observed at very low temperature are much larger than the actual size of the grains. Packets of grains with less than 15° of internal misorientation were defined as effective grains for cleavage. In the transition range, the texture enhances intergranular delamination on the 14%Cr rod material. The occurrence of delamination consumes a lot of energy and tends to enhance scattering in impact energies.

The order-disorder transition in Cu2ZnSnS4: A theoretical and experimental study

International Nuclear Information System (INIS)

Quennet, Marcel; Ritscher, Anna; Lerch, Martin; Paulus, Beate

2017-01-01

In this work the Cu/Zn order-disorder transition in Cu 2 ZnSnS 4 kesterites on Wyckoff positions 2c and 2d was investigated by a structural and electronic analysis in theory and experiment. For experimental investigations stoichiometric samples with different Cu/Zn order, annealed in the temperature range of 473–623 K and afterwards quenched, were used. The optical gaps were determined using the Derivation of Absorption Spectrum Fitting (DASF) method. Furthermore, the order-disorder transition was examined by DFT calculations for a closer analysis of the origins of the reduced band gap, showing a good agreement with experimental data with respect to structural and electronic properties. Our studies show a slight increase of lattice parameter c in the kesterite lattice with increasing disorder. Additionally, a reduced band gap was observed with increasing disorder, which is an effect of newly occurring binding motifs in the disordered kesterite structure. - Highlights: • Experimental and theoretical investigation on the order-disorder transition in kesterites. • Slight enlargements of lattice constants due to disorder in experiment and theory. • Strong band gap fluctuations with decreasing order. • Electronic structure deviations due to changing binding motifs. • Disorder as possible main source of low open-circuit voltages.

Long Distance Modulation of Disorder-to-Order Transitions in Protein Allostery.

Science.gov (United States)

Wang, Jingheng; Custer, Gregory; Beckett, Dorothy; Matysiak, Silvina

2017-08-29

Elucidation of the molecular details of allosteric communication between distant sites in a protein is key to understanding and manipulating many biological regulatory processes. Although protein disorder is acknowledged to play an important thermodynamic role in allostery, the molecular mechanisms by which this disorder is harnessed for long distance communication are known for a limited number of systems. Transcription repression by the Escherichia coli biotin repressor, BirA, is allosterically activated by binding of the small molecule effector biotinoyl-5'-AMP. The effector acts by promoting BirA dimerization, which is a prerequisite for sequence-specific binding to the biotin biosynthetic operon operator sequence. A 30 Å distance separates the effector binding and dimerization surfaces in BirA, and previous studies indicate that allostery is mediated, in part, by disorder-to-order transitions on the two coupled sites. In this work, combined experimental and computational methods have been applied to investigate the molecular basis of allosteric communication in BirA. Double-mutant cycle analysis coupled with thermodynamic measurements indicates functional coupling between residues in disordered loops on the two distant surfaces. All atom molecular dynamics simulations reveal that this coupling occurs through long distance reciprocal modulation of the structure and dynamics of disorder-to-order transitions on the two surfaces.

Characterization of precipitates in nano structured 14% Cr ODS alloys for fusion application

International Nuclear Information System (INIS)

He, P.; Klimenkov, M.; Lindau, R.; Möslang, A.

2012-01-01

Highlights: ► We examine Ti influence on microstructure and mechanical properties of ODS steels. ► Ti addition leads to bimodal grain size distribution. ► The formation of Ti oxide and Y–Ti–O particles is observed in Ti-containing steels. ► The best nanoparticle refinement and tensile strength are obtained with 0.3% Ti. ► Ti exhibits adverse effect on the Charpy impact property. - Abstract: Oxide dispersion strengthened (ODS) reduced activation ferritic (RAF) steels, have been considered as promising materials for application in fusion power reactors up to about 750 °C. Four ODS RAF steels, with compositions of Fe–13.5Cr–2W–(0–0.2–0.3–0.4)Ti–0.3Y 2 O 3 (in wt.%) were produced by powder metallurgy technique. For the different Ti-contents, the correlation between microstructure and mechanical properties was analyzed by means of scanning electron microscope (SEM) and transmission electron microscope (TEM) equipped with energy- dispersive X-ray spectrometer (EDX) and electron energy loss spectrometer (EELS). A bimodal grain size distribution was observed in all as-hipped Ti-containing ODS alloys. These alloys consisted of coarse grains typical ranging from 1 μm to 8 μm and fine grains well below 1 μm in diameter. The addition of Ti resulted in the formation of spherical Ti oxides rather than Cr oxides owing to the stronger affinity of Ti. The influence of Ti on particle size refinement was striking and the optimum effect was obtained when adding 0.3% Ti. Generally the hardness increased consistently with increasing in Ti content. The ODS alloying with 0.3% Ti exhibit the highest strength due to the optimum refinement of mean ODS particle size.

Quenched disorder and spin-glass correlations in XY nematics

International Nuclear Information System (INIS)

Petridis, L; Terentjev, E M

2006-01-01

We present a theoretical study of the equilibrium ordering in a 3D XY nematic system with quenched random disorder. Within this model, treated with the replica trick and Gaussian variational method, the correlation length is obtained as a function of the local nematic order parameter Q and the effective disorder strength Γ. These results, ξ ∼ Q 2 e 1/Q 2 and ξ ∼ (1/Γ) e -Γ , clarify what happens in the limiting cases of diminishing Q and Γ, that is near a phase transition of a pure system. In particular, it is found that quenched disorder is irrelevant as Q → 0 and hence does not change the character of the continuous XY nematic-isotropic phase transition. We discuss how these results compare with experiments and simulations

Commissioning and initial experimental program of the BGO-OD experiment at ELSA

Science.gov (United States)

Alef, S.; Bauer, P.; Bayadilov, D.; Beck, R.; Becker, M.; Bella, A.; Bielefeldt, P.; Böse, S.; Braghieri, A.; Brinkmann, K.; Cole, P.; Di Salvo, R.; Dutz, H.; Elsner, D.; Fantini, A.; Freyermuth, O.; Friedrich, S.; Frommberger, F.; Ganenko, V.; Geffers, D.; Gervino, G.; Ghio, F.; Görtz, S.; Gridnev, A.; Gutz, E.; Hammann, D.; Hannappel, J.; Hillert, W.; Ignatov, A.; Jahn, R.; Joosten, R.; Jude, T. C.; Klein, F.; Knaust, J.; Kohl, K.; Koop, K.; Krusche, B.; Lapik, A.; Levi Sandri, P.; Lopatin, I. V.; Mandaglio, G.; Messi, F.; Messi, R.; Metag, V.; Moricciani, D.; Mushkarenkov, A.; Nanova, M.; Nedorezov, V.; Novinskiy, D.; Pedroni, P.; Reitz, B.; Romaniuk, M.; Rostomyan, T.; Rudnev, N.; Schaerf, C.; Scheluchin, G.; Schmieden, H.; Stugelev, A.; Sumachev, V.; Tarakanov, V.; Vegna, V.; Walther, D.; Watts, D.; Zaunick, H.; Zimmermann, T.

2016-11-01

BGO-OD is a new meson photoproduction experiment at the ELSA facility of Bonn University. It aims at the investigation of non strange and strange baryon excitations, and is especially designed to be able to detect weekly bound meson-baryon type structures. The setup for the BGO-OD experiment is presented, the characteristics of the photon beam and the detector performances are shown and the initial experimental program is discussed.

Electronic structure, magnetism and disorder in the Heusler compound Co2TiSn

International Nuclear Information System (INIS)

Kandpal, Hem Chandra; Ksenofontov, Vadim; Wojcik, Marek; Seshadri, Ram; Felser, Claudia

2007-01-01

Polycrystalline samples of the Heusler compound Co 2 TiSn have been prepared and studied using bulk techniques (x-ray diffraction and magnetization) as well as local probes ( 119 Sn Moessbauer spectroscopy and 59 Co nuclear magnetic resonance spectroscopy) in order to determine how disorder affects the half-metallic behaviour and also to establish the joint use of Moessbauer and NMR spectroscopies as a quantitative probe of local atom ordering in these compounds. Additionally, density functional electronic structure calculations on ordered and partially disordered Co 2 TiSn compounds have been carried out at a number of different levels of theory in order to simultaneously understand how the particular choice of DFT scheme as well as disorder affects the computed magnetization. Our studies suggest that a sample which seems well ordered by x-ray diffraction and magnetization measurements can possess up to 10% of antisite (Co/Ti) disordering. Computations similarly suggest that even 12.5% antisite Co/Ti disorder does not destroy the half-metallic character of this material. However, the use of an appropriate level of non-local DFT is crucial

Online recognition of Chinese characters: the state-of-the-art.

Science.gov (United States)

Liu, Cheng-Lin; Jaeger, Stefan; Nakagawa, Masaki

2004-02-01

Online handwriting recognition is gaining renewed interest owing to the increase of pen computing applications and new pen input devices. The recognition of Chinese characters is different from western handwriting recognition and poses a special challenge. To provide an overview of the technical status and inspire future research, this paper reviews the advances in online Chinese character recognition (OLCCR), with emphasis on the research works from the 1990s. Compared to the research in the 1980s, the research efforts in the 1990s aimed to further relax the constraints of handwriting, namely, the adherence to standard stroke orders and stroke numbers and the restriction of recognition to isolated characters only. The target of recognition has shifted from regular script to fluent script in order to better meet the requirements of practical applications. The research works are reviewed in terms of pattern representation, character classification, learning/adaptation, and contextual processing. We compare important results and discuss possible directions of future research.

Increase in tartrate-resistant acid phosphatase of bone at the early stage of ascorbic acid deficiency in the ascorbate-requiring Osteogenic Disorder Shionogi (ODS) rat.

Science.gov (United States)

Goto, A; Tsukamoto, I

2003-08-01

The effect of ascorbic acid deficiency on bone metabolism was evaluated using the ascorbate-requiring Osteogenic Disorder Shionogi (ODS) rat model. Ascorbic acid (Asc)-deficient rats gained body weight in a manner similar to Asc-supplemented rats (control) during 3 weeks, but began to lose weight during the 4th week of Asc deficiency. The tartrate-resistant acid phosphatase (TRAP) activity in serum increased to about 2-fold the control value in the rats fed the Asc-free diet for 2, 3, and 4 weeks (AscD2, AscD3, and AscD4), while a decrease in the alkaline phosphatase (ALP) activity was observed only in AscD4 rats. The serum pyridinoline cross-linked carboxyterminal telopeptide of type I collagen (ICTP) level significantly increased to 1.3-, 1.4-, and 1.9-fold of that in the controls in AscD2, D3, and D4, respectively. The ALP activity in the distal femur was unchanged in AscD1, D2, and D3, but decreased to 50% of the control level in AscD4 rats. The TRAP activity in the distal femur increased to about 2-fold of that in the controls in the AscD2 and D3 and decreased to the control level in the AscD4 rats. The amount of hydroxyproline in the distal femur significantly decreased to about 80%, 70%, and 60% of the control in AscD2, D3, and D4 rats, respectively. These decreases were associated with a similar reduction in the calcium content of the distal femur. Histochemical analysis of the distal femur showed an increase in TRAP-positive cells in AscD2 and AscD3 rats and a decrease in the trabecular bone in AscD2, D3, and D4 rats. These results suggested that a deficiency of Asc stimulated bone resorption at an early stage, followed by a decrease in bone formation in mature ODS rats which already had a well-developed collagen matrix and fully differentiated osteoblasts.

Personality in remitted major depressive disorder with single and recurrent episodes assessed with the Temperament and Character Inventory.

Science.gov (United States)

Teraishi, Toshiya; Hori, Hiroaki; Sasayama, Daimei; Matsuo, Junko; Ogawa, Shintaro; Ishida, Ikki; Nagashima, Anna; Kinoshita, Yukiko; Ota, Miho; Hattori, Kotaro; Higuchi, Teruhiko; Kunugi, Hiroshi

2015-01-01

Previous studies consistently reported increased harm avoidance (HA) assessed with the Temperament and Character Inventory (TCI) in patients with major depressive disorder (MDD). However, such findings may have been related with depression severity and number of depressive episodes. The aims of the present study were twofold: to examine TCI personality profile in remitted MDD (DSM-IV) patients and to compare TCI personality between MDD patients with single episode (SGL-MDD) and those with recurrent episodes (REC-MDD) in order to elucidate personality profile associated with recurrence. TCI was administered to 86 outpatients with remitted SGL-MDD (12 male and 17 female patients; mean age 43.2 ± 12.1 years) and REC-MDD (26 male and 31 female patients; 40.3 ± 11.6 years), and 529 healthy controls (225 men and 304 women; 43.4 ± 15.5 years), matched for age, sex and education years. Logistic regression analyses were performed in which single/recurrent episodes of depression were the dependent variable and age, sex, age of onset, family history of psychiatric disease and TCI scores were entered as possible predictors. The remitted MDD patients had significantly higher scores on HA (P differences in personality profile between remitted MDD patients and controls, and between remitted REC-MDD and SGL-MDD patients, suggesting that they are trait markers. HA and fatigability might be useful to assess risk for recurrence of depression. © 2014 The Authors. Psychiatry and Clinical Neurosciences © 2014 Japanese Society of Psychiatry and Neurology.

Effect of porous zeolite on temperature-dependent physical properties of polypropylene/octadecane (PP/OD composite films

Directory of Open Access Journals (Sweden)

D. Kim

2018-07-01

Full Text Available Polymeric materials with temperature-dependent gas permeabilities using a phase change material are designed and their applicability as a packaging system investigated. Polypropylene/octadecane/zeolite (PP/OD/ZL composite films were prepared via extrusion process. ZL was used as a filler to enhance the dispersion and interfacial interaction between the OD and the PP originating from different flowabilities during the extrusion process. (FTIR and (WAXD analyses showed that the incorporation of ZL increased the interfacial interaction between PP and OD, resultantly enhancing the thermal stability, mechanical properties, and the oxygen transmittance rate and mechanical properties after contact with food simulants and thermal treatment. When the temperature was elevated from 10 to 30 °C, oxygen and water vapor transmittance rate of the composite films increased sharply because of the influence of the OD content. It was surmised that temperaturedependent permeation jump caused by increasing of segmental mobility of OD phase and converting the crystalline structure to an amorphous one of OD phase in the composite films. However, the permeation jump in the composite films was weakened as the ZL content increased. These results are related to changes in the interfacial interaction and crystallinity in the composite films due to the addition of ZL.

Structure of Oxide Nanoparticles in Fe-16Cr MA/ODS Ferritic Steel

Energy Technology Data Exchange (ETDEWEB)

Hsiung, L; Fluss, M; Kimura, A

2010-04-06

Oxide nanoparticles in Fe-16Cr ODS ferritic steel fabricated by mechanical alloying (MA) method have been examined using high-resolution transmission electron microscopy (HRTEM) techniques. A partial crystallization of oxide nanoparticles was frequently observed in as-fabricated ODS steel. The crystal structure of crystalline oxide particles is identified to be mainly Y{sub 4}Al{sub 2}O{sub 9} (YAM) with a monoclinic structure. Large nanoparticles with a diameter larger than 20 nm tend to be incoherent and have a nearly spherical shape, whereas small nanoparticles with a diameter smaller than 10 nm tend to be coherent or semi-coherent and have faceted boundaries. The oxide nanoparticles become fully crystallized after prolonged annealing at 900 C. These results lead us to propose a three-stage formation mechanism of oxide nanoparticles in MA/ODS steels.

Interaction order and anxiety disorder: A 'Batesonian' heuristic of speaking patterns during psychotherapy.

Science.gov (United States)

Streeck, Jürgen

2011-01-01

This paper describes speaking practices enacted by young female in-patients during psychotherapy sessions. The patients are in treatment for anxiety and panic disorders (social phobias). The practices involve prosodic, lexical and pragmatic aspects of utterance construction. An effect that they share is that the speaker's embodied presence in her talk and her epistemic commitment to it are reduced as the utterance progresses. The practices are interpreted in light of Bateson's interactional theory of character formation: as elements of a self-sustaining system Angst (anxiety). The study has grown out of an interdisciplinary effort to explore possible relationships between types of anxiety and the communicative and linguistic patterns by which patients describe panic attacks and other highly emotional experiences.

Characters with personality!

NARCIS (Netherlands)

Bosch, K. van den; Brandenburgh, A.; Muller, T.J.; Heuvelink, A.

2012-01-01

Serious games offer an opportunity for learning communication skills by practicing conversations with one or more virtual characters, provided that the character(s) behave in accordance with their assigned properties and strate-gies. This paper presents an approach for developing virtual characters

the organizing principle at the interface of biological (dis)order

Indian Academy of Sciences (India)

Complexity: the organizing principle at the interface of biological (dis)order ... in a quantifiable fashion, as the amount of information, an informatic template ... We propose that the complexity of living systems can be understood through two ...

Evaluation of cost reduction method for manufacturing ODS ferritic claddings

International Nuclear Information System (INIS)

Fujiwara, Masayuki; Mizuta, Shunji; Ukai, Shigeharu

2000-04-01

For evaluating the fast reactor system technology, it is important to evaluate the practical feasibility of ODS ferritic claddings, which is the most promising materials to attain the goal of high coolant temperature and more than 150 GWd/t. Based on the results of their technology development, mass production process with highly economically benefit as well as manufacturing cost estimation of ODS ferritic claddings were preliminarily conducted. From the view point of future utility scale, the cost for manufacturing mother tubes has a dominant factor in the total manufacturing cost. The method to reduce the cost of mother tube manufacturing was also preliminarily investigated. (author)

Strangeness photoproduction at the BGO-OD experiment

Energy Technology Data Exchange (ETDEWEB)

Jude, Thomas [Physikalisches Institut, Universitaet Bonn, Nussallee 12, Bonn (Germany); Collaboration: BGO-OD-Collaboration

2015-07-01

The BGO-OD experiment at the ELSA accelerator facility uses an energy tagged bremstrahlung photon beam to investigate the internal structure of the nucleon. The setup consists of a highly segmented BGO calorimeter surrounding the target, with a particle tracking magnetic spectrometer at forward angles. The BGO-OD is ideal for investigating the photoproduction of hadrons of non-zero strangeness. The high momentum resolution at forward angles covers a kinematic region where t-channel exchange mechanisms play a dominant role. This is complemented by the neutral and charged particle identification in the BGO calorimeter for the identification of hyperon decays. The first part of an extensive physics programme includes measurements of the differential cross section at forward angles for γp → K{sup +}Λ and, using linearly polarised photons, the beam asymmetry, Σ, for γp → K{sup 0}Σ{sup +}. This latter measurement is focussed on the K* threshold region where a cusp-like structure was recently observed in the total cross section. Analysis of these reaction channels for both real and simulated data is presented.

Cerium Titanate Nano dispersoids in Ni-base ODS Alloy

Energy Technology Data Exchange (ETDEWEB)

Kang, Suk Hoon; Chun, Young-Bum; Rhee, Chang-Kyu; Jang, Jinsung [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Chung, Hee-Suk [Korea Basic Science Institute, Jeonju (Korea, Republic of)

2016-10-15

Oxide-dispersion-strengthened (ODS) nickel-base alloys have potential for use in rather demanding elevated-temperature environments, such as aircraft turbine engines, heat exchanger of nuclear reactor. For improved high temperature performance, several ODS alloys were developed which possess good elevated temperature strength and over-temperature capacity plus excellent static oxidation resistance. The high temperature strength of ODS alloys is due to the presence of a uniform dispersion of fine, inert particles. Ceria mixed oxides have been studied because of their application potential in the formation of nanoclusters. By first principle study, it was estimated that the formation energy of the Ce-O dimer with voids in the nickel base alloy is lower than other candidates. The result suggests that the dispersion of the Ceria mixed oxides can suppress the voiding or swelling behavior of nickel base alloy during neutron irradiation. In this study, the evolution of cerium titanate nano particles was investigated using in-situ TEM. It was found that the Ce{sub 2}Ti{sub 3}O{sub 9} phase was easily formed rather than remain as CeO{sub 2} during annealing; Ti was effective to form the finer oxide particles. Ce{sub 2}Ti{sub 3}O{sub 9} is expected to do the great roll as dispersoids in Ni-base alloy, contribute to achieve the better high temperature property, high swelling resistance during neutron radiation.

Order in disorder

DEFF Research Database (Denmark)

Fraser, Hector W L; Nichol, Gary S; Uhrín, Dušan

2018-01-01

to all structures describes a centred hexagon with the MIII sites disordered around the outer wheel. The structural disorder has been characterised via single crystal X-ray crystallography, 1-3D 1H and 13C solution-state NMR spectroscopy of the diamagnetic analogue (4), and solid-state 27Al MAS NMR......A family of heterometallic Anderson-type 'wheels' of general formula [MIII2MII5(hmp)12](ClO4)4 (where MIII = Cr or Al and MII = Ni or Zn giving [Cr2Ni5] (1), [Cr2Zn5] (2), [Al2Ni5] (3) and [Al2Zn5] (4); hmpH = 2-pyridinemethanol) have been synthesised solvothermally. The metallic skeleton common...

ZASEBNOST OD RABE DO ZLORABE

OpenAIRE

Flegerič, Tamara

2012-01-01

Nastanek interneta in njegova popularizacija s pojavom svetovnega spleta je povzročil veliko revolucijo. Najpopularnejše orodje spleta 2.0 in s tem najpomembnejši medij spletne komunikacije so postala spletna socialna omrežja. Spletno socialno omrežje, ki je postalo pravi fenomen in kateremu smo se posvetili v pričujoči diplomski nalogi, je Facebook. V diplomskem delu z naslovom »Zasebnost od rabe do zlorabe« sta predstavljeni zasebnost in varnost na Facebooku. V teoretičnem delu se bomo posv...

Dissimilar Joining of ODS and F/M Steel Tube by Friction Stir Welding

Energy Technology Data Exchange (ETDEWEB)

Kang, Suk Hoon; Noh, Sanghoon; Kim, Jun Hwan; Kim, Tae Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Oxide Dispersion strengthened (ODS) steels, it is well known that uniform nano-oxide dispersoids act as pinning points to obstruct dislocation and grain boundary motion, however, those advantages will be disappeared while the material is subjected to the high temperature of conventional fusion welding. Rotary friction welding, also referred to as friction stir welding (FSW), has shown great promise as a method for welding traditionally difficult to weld materials such as aluminum alloys. This relatively new technology has more recently been applied to higher melting temperature alloys such as steels, nickel-based and titanium alloys. Friction stir processing (FSP) is a method of changing the properties of a metal through intense, localized plastic deformation. FSW is the precursor of the FSP technique. When ideally implemented, this process mixes the material without changing the phase and creates a microstructure with fine, equiaxed grains. This homogeneous grain structure, separated by high-angle boundaries, allows some alloys to take on superplastic properties. In this study, FSW is used as a substitutive welding process between FMS tube and ODS parts. The dimension of tube is 7.0 OD, 0.5 T. During the FSW, dynamic-recrystallized grains are developed; the uniform oxides Dispersion is preserved in the metal matrix. The microstructure and microtexture of the material near the stir zone is found to be influenced by the rotational behavior of the tool. The additive effect from FSP on sample surface is considered. Since the mechanical alloying (MA) and FSP commonly apply extreme shear deformation on materials, the Dispersion of oxide particle in ODS steels is very active during both processes. Friction stir welding appears to be a very promising technique for the welding of FMS and ODS steels in the form of sheet and tube. FSW could successfully produce defect-free welds on FMS tubes and ODS ring assembly. FSW produces a fine grain structure consisting of ferrite and

Dissimilar Joining of ODS and F/M Steel Tube by Friction Stir Welding

International Nuclear Information System (INIS)

Kang, Suk Hoon; Noh, Sanghoon; Kim, Jun Hwan; Kim, Tae Kyu

2014-01-01

Oxide Dispersion strengthened (ODS) steels, it is well known that uniform nano-oxide dispersoids act as pinning points to obstruct dislocation and grain boundary motion, however, those advantages will be disappeared while the material is subjected to the high temperature of conventional fusion welding. Rotary friction welding, also referred to as friction stir welding (FSW), has shown great promise as a method for welding traditionally difficult to weld materials such as aluminum alloys. This relatively new technology has more recently been applied to higher melting temperature alloys such as steels, nickel-based and titanium alloys. Friction stir processing (FSP) is a method of changing the properties of a metal through intense, localized plastic deformation. FSW is the precursor of the FSP technique. When ideally implemented, this process mixes the material without changing the phase and creates a microstructure with fine, equiaxed grains. This homogeneous grain structure, separated by high-angle boundaries, allows some alloys to take on superplastic properties. In this study, FSW is used as a substitutive welding process between FMS tube and ODS parts. The dimension of tube is 7.0 OD, 0.5 T. During the FSW, dynamic-recrystallized grains are developed; the uniform oxides Dispersion is preserved in the metal matrix. The microstructure and microtexture of the material near the stir zone is found to be influenced by the rotational behavior of the tool. The additive effect from FSP on sample surface is considered. Since the mechanical alloying (MA) and FSP commonly apply extreme shear deformation on materials, the Dispersion of oxide particle in ODS steels is very active during both processes. Friction stir welding appears to be a very promising technique for the welding of FMS and ODS steels in the form of sheet and tube. FSW could successfully produce defect-free welds on FMS tubes and ODS ring assembly. FSW produces a fine grain structure consisting of ferrite and

The microstructure and mechanical properties of Al-containing 9Cr ODS ferritic alloy

Energy Technology Data Exchange (ETDEWEB)

Zhang, Guangming [School of Materials Science and Engineering, University of Science and Technology, Beijing, Beijing 100083 (China); Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, IL 61801 (United States); Zhou, Zhangjian, E-mail: zhouzhj@mater.ustb.edu.cn [School of Materials Science and Engineering, University of Science and Technology, Beijing, Beijing 100083 (China); Mo, Kun [Nuclear Engineering Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Wang, Pinghuai [Fusion Reactor & Materials Division, Southwestern Institute of Physics, Chengdu, Sichuan 610041 (China); Miao, Yinbin [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, IL 61801 (United States); Li, Shaofu; Wang, Man [School of Materials Science and Engineering, University of Science and Technology, Beijing, Beijing 100083 (China); Liu, Xiang [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, IL 61801 (United States); Gong, Mengqiang [School of Materials Science and Engineering, University of Science and Technology, Beijing, Beijing 100083 (China); Almer, Jonathan [X-ray Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Stubbins, James F. [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, IL 61801 (United States)

2015-11-05

In this study, a 9Cr oxide-dispersion strengthened (ODS) alloy with additional corrosion resistant element Al was fabricated by mechanical alloying (MA) and hot pressing (HP) to explore the impact of Al on the microstructure and mechanical property of a 9Cr ODS alloy. It is found that the Al completely dissolved into the Fe–Cr matrix after milling for 30 h. The minor phases in the Al-containing 9Cr ODS ferritic alloy were investigated by a high-energy X-ray, and were identified to be orthorhombic-YAlO{sub 3} (YAP), bcc-Y{sub 3}Al{sub 5}O{sub 12} (YAG), monoclinic-Al{sub 2}Y{sub 4}O{sub 9} (YAM), and hexagonal-YAlO{sub 3} (YAH). These phases were further confirmed by selected area diffraction pattern (SADP), energy dispersive spectroscopy (EDS), and high resolution transmission electron microscopy (HRTEM). In addition, their volume fractions were also calculated from the integrated intensities. According to the analysis of the particles and their formation sequences, the larger particles (greater than 100 nm) are identified as mainly YAG and Al{sub 2}O{sub 3} particles, while the particles with small size (less than 30 nm) are likely primarily YAM, YAH, and YAP particles. The yielding strength (YS) and ultimate tensile strength (UTS) at RT are 563 MPa and 744 MPa, respectively, while the YS and UTS at 700 °C are 245 MPa and 276 MPa, respectively. Although the addition Al in ODS alloys decreases the strength at RT, the values at high temperature are similar to those obtained for 9Cr ODS alloys strengthened by fine Y–Ti–O particles. - Graphical abstract: Synchrotron X-ray diffraction line profile of the 9CrAl ODS alloy; (Ferrite matrix phases, along with minor phases, orthorhombic YAlO{sub 3} (yttrium aluminum perovskite, YAP), bcc Y{sub 3}Al{sub 5}O{sub 12} (yttrium aluminum garnet, YAG), monoclinic Al{sub 2}Y{sub 4}O{sub 9} (yttrium aluminum monoclinic, YAM), and hexagonal YAlO{sub 3} (yttium aluminum hexagonal, YAH) were recognized.). - Highlights: • The

Rotational order–disorder structure of fluorescent protein FP480

International Nuclear Information System (INIS)

Pletnev, Sergei; Morozova, Kateryna S.; Verkhusha, Vladislav V.; Dauter, Zbigniew

2009-01-01

An analysis of the rotational order–disorder structure of fluorescent protein FP480 is presented. In the last decade, advances in instrumentation and software development have made crystallography a powerful tool in structural biology. Using this method, structural information can now be acquired from pathological crystals that would have been abandoned in earlier times. In this paper, the order–disorder (OD) structure of fluorescent protein FP480 is discussed. The structure is composed of tetramers with 222 symmetry incorporated into the lattice in two different ways, namely rotated 90° with respect to each other around the crystal c axis, with tetramer axes coincident with crystallographic twofold axes. The random distribution of alternatively oriented tetramers in the crystal creates a rotational OD structure with statistically averaged I422 symmetry, although the presence of very weak and diffuse additional reflections suggests that the randomness is only approximate

Corrosion behavior of ODS steels with several chromium contents in hot nitric acid solutions

Science.gov (United States)

Tanno, Takashi; Takeuchi, Masayuki; Ohtsuka, Satoshi; Kaito, Takeji

2017-10-01

Oxide dispersion strengthened (ODS) steel cladding tubes have been developed for fast reactors. Tempered martensitic ODS steels with 9 and 11 wt% of chromium (9Cr-, 11Cr-ODS steel) are the candidate material in research being carried out at JAEA. In this work, fundamental immersion tests and electrochemical tests of 9 to 12Cr-ODS steels were systematically conducted in various nitric acid solutions at 95 °C. The corrosion rate decreased exponentially with effective solute chromium concentration (Creff) and nitric acid concentration. Addition of vanadium (V) and ruthenium (Ru) also decreased the corrosion rate. The combination of low Creff and dilute nitric acid could not avoid the active mass dissolution during active domain at the beginning of immersion, and the corrosion rate was high. Higher Creff decreased the partial anodic current during the active domain and assisted the passivation of the surface of the steel. Concentrated nitric acid and addition of Ru and V increased partial cathodic current and shifted the corrosion potential to noble side. These effects should have prevented the active mass dissolution and decreased the corrosion rate.

Zależność bodźcowości ciśnienia od cyrkulacji atmosferycznej w Warszawie

Directory of Open Access Journals (Sweden)

Katarzyna Rozbicka

2016-09-01

Full Text Available W pracy zbadano: czasowy rozkład ciśnienia atmosferycznego, bodźcowe oddziaływanie ciśnienia atmosferycznego o wartościach wyższych od 1015 hPa lub niższych od 985 hPa. Wyznaczono częstość i prawdopodobieństwo wystąpienia ciśnienia o oddziaływaniu bodźcowym oraz zanalizowano zależność zmian międzydobowych ciśnienia od typów cyrkulacji atmosferycznej według klasyfikacji Lityńskiego. Do obliczeń wykorzystano cogodzinne wartości ciśnienia atmosferycznego pochodzące ze stacji Ursynów SGGW z okresu 2011–2015. Na podstawie badań stwierdzono, że ciśnienie atmosferyczne o oddziaływaniu bodźcowym w Warszawie może wystąpić w każdym miesiącu z prawdopodobieństwem od 0,2% do 19,1%, w przypadku ciśnienia o wartościach wyższych niż 1015 hPa oraz od 0,1 do 3,4%, w przypadku ciśnienia niższego od 985 hPa, z wyjątkiem czerwca i sierpnia. Zmiany międzydobowe ciśnienia atmosferycznego mogą osiągać około 24 hPa, a częstość występowania bodźców „silnych” wywołanych tymi zmianami wyniosła w poszczególnych miesiącach od 1% do 16%, natomiast bodźców „bardzo silnych” od 2% do 8%. Spośród sytuacji synoptycznych największe znaczenie dla bodźcowości zmian ciśnienia mają sytuacje cyklonalne: szczególnie przy adwekcji powietrza z sektora północno-zachodniego (NWC.

Construction of order mesoporous (Eu–La)/ZnO composite material and its luminescent characters

Energy Technology Data Exchange (ETDEWEB)

Bao, Na; Liu, Yu; Li, Zi-Wei [School of Chemistry & Environmental Engineering, Changchun University of Science and Technology, Changchun 130022 (China); Yu, Hui, E-mail: yh2001101@163.com [School of Chemistry & Environmental Engineering, Changchun University of Science and Technology, Changchun 130022 (China); Bai, Hao-tian [School of Chemistry & Environmental Engineering, Changchun University of Science and Technology, Changchun 130022 (China); Xia, Long, E-mail: xialong_aron@163.com [School of Materials Science and Engineering, Harbin Institute of Technology at Weihai, Weihai 264209 (China); Feng, Da-wei [Changchun University of Science and Technology Science Park, Changchun 130022 (China); Guangdong College of Business and Technology, Zhaoqing 526020 (China); Zhang, Hong-bo; Dong, Xiang-ting; Wang, Tian-yang; Han, Ji; Wu, Rong-yi; Zhang, Qi [School of Chemistry & Environmental Engineering, Changchun University of Science and Technology, Changchun 130022 (China)

2016-09-15

For the first time, the order mesoporous zinc oxide was synthesized by a soft template synthesis method. The Eu and La phosphate were introduced into the prepared mesoporous zinc oxide by the high temperature solid phase method, and got the mesoporous rare earth/zinc oxide composite materials. The luminescence characters of the materials were studied. The influences of La to Eu luminescent properties had been studied, and the optimum proportion of Eu and La was discussed. The influences of La and Eu to ZnO luminescence properties were also been studied. La phosphate had the large influence to Eu luminescent. ZnO had a strong emission peak at 469 nm, which overlapped with the {sup 7}F{sub 0}–{sup 5}D{sub 2} transition excitation peak of Eu at 465 nm. It indicated that the effective energy transfer happened between ZnO and Eu, which strongly enhanced the luminescence intensity of Eu. At the same time, the Eu and La phosphates could regulate the defect density of ZnO, which could regulate the luminescent intensity of ZnO, and realized the adjustment of luminescent color between green and red light.

Effect of Mechanical Alloying Atmospheres and Oxygen Concentration on Mechanical Properties of ODS Ferritic Steels

International Nuclear Information System (INIS)

Noh, Sanghoon; Choi, Byoungkwon; Han, Changhee; Kim, Kibaik; Kang, Sukhoon; Chun, Youngbum; Kim, Taekyu

2013-01-01

Finely dispersed nano-oxide particles with a high number density in the homogeneous grain matrix are essential to achieve superior mechanical properties at high temperatures, and these unique microstructures can be obtained through the mechanical alloying (MA) and hot consolidation process. The microstructure and mechanical property of ODS steel significantly depends on its powder property and the purity after the MA process. These contents should be carefully controlled to improve the mechanical property at elevated temperature. In particular, appropriate the control of oxygen concentration improves the mechanical property of ODS steel at high temperature. An effective method is to control the mechanical alloying atmosphere by high purity inert gas. In the present study, the effects of mechanical alloying atmospheres and oxygen concentration on the mechanical property of ODS steel were investigated. ODS ferritic alloys were fabricated in various atmospheres, and the HIP process was used to investigate the effects of MA atmospheres and oxygen concentration on the microstructure and mechanical property. ODS ferritic alloys milled in an Ar-H 2 mixture, and He is effective to reduce the excess oxygen concentration. The YH 2 addition made an extremely reduced oxygen concentration by the internal oxygen reduction reaction and resulted in a homogeneous microstructure and superior creep strength

Analysis of sorption into single ODS-silica gel microparticles in acetonitrile-water.

Science.gov (United States)

Nakatani, Kiyoharu; Kakizaki, Hiroshi

2003-08-01

Intraparticle mass transfer processes of Phenol Blue (PB) in single octadecylsilyl (ODS)-silica gel microparticles in acetonitrile-water were analyzed by microcapillary manipulation and microabsorption methods. An absorption maximum of PB, the sorption isotherm parameters, and the sorption rate in the microparticle system were highly dependent on the percentage of acetonitrile in solution. The results are discussed in terms of the microscopic polarity surrounding PB in the ODS phase and the relationship between the isotherm parameters and the sorption rate.

Structure–Conductivity Relationships in Ordered and Disordered Salt-Doped Diblock Copolymer/Homopolymer Blends

Energy Technology Data Exchange (ETDEWEB)

Irwin, Matthew T.; Hickey, Robert J.; Xie, Shuyi; So, Soonyong; Bates, Frank S.; Lodge, Timothy P. (UMM)

2016-11-21

We examine the relationship between structure and ionic conductivity in salt-containing ternary polymer blends that exhibit various microstructured morphologies, including lamellae, a hexagonal phase, and a bicontinuous microemulsion, as well as the disordered phase. These blends consist of polystyrene (PS, M_n ≈ 600 g/mol) and poly(ethylene oxide) (PEO, M_n ≈ 400 g/mol) homopolymers, a nearly symmetric PS–PEO block copolymer (M_n ≈ 4700 g/mol), and lithium bis(trifluoromethane)sulfonamide (LiTFSI). These pseudoternary blends exhibit phase behavior that parallels that of well-studied ternary polymer blends consisting of A and B homopolymers compatibilized by an AB diblock copolymer. The utility of this framework is that all blends have nominally the same number of ethylene oxide, styrene, Li⁺, and TFSI– units, yet can exhibit a variety of microstructures depending on the relative ratio of the homopolymers to the block copolymer. For the systems studied, the ratio r = [Li⁺]/[EO] is maintained at 0.06, and the volume fraction of PS homopolymer is kept equal to that of PEO homopolymer plus salt. The total volume fraction of homopolymer is varied from 0 to 0.70. When heated through the order–disorder transition, all blends exhibit an abrupt increase in conductivity. However, analysis of small-angle X-ray scattering data indicates significant structure even in the disordered state for several blend compositions. By comparing the nature and structure of the disordered states with their corresponding ordered states, we find that this increase in conductivity through the order–disorder transition is most likely due to the elimination of grain boundaries. In either disordered or ordered states, the conductivity decreases as the total amount of homopolymer is increased, an unanticipated observation. This trend with increasing homopolymer loading is hypothesized to result from an increased density of �

Chinese character recognition based on Gabor feature extraction and CNN

Science.gov (United States)

Xiong, Yudian; Lu, Tongwei; Jiang, Yongyuan

2018-03-01

As an important application in the field of text line recognition and office automation, Chinese character recognition has become an important subject of pattern recognition. However, due to the large number of Chinese characters and the complexity of its structure, there is a great difficulty in the Chinese character recognition. In order to solve this problem, this paper proposes a method of printed Chinese character recognition based on Gabor feature extraction and Convolution Neural Network(CNN). The main steps are preprocessing, feature extraction, training classification. First, the gray-scale Chinese character image is binarized and normalized to reduce the redundancy of the image data. Second, each image is convoluted with Gabor filter with different orientations, and the feature map of the eight orientations of Chinese characters is extracted. Third, the feature map through Gabor filters and the original image are convoluted with learning kernels, and the results of the convolution is the input of pooling layer. Finally, the feature vector is used to classify and recognition. In addition, the generalization capacity of the network is improved by Dropout technology. The experimental results show that this method can effectively extract the characteristics of Chinese characters and recognize Chinese characters.

Short-Range-Order for fcc-based Binary Alloys Revisited from Microscopic Geometry

Science.gov (United States)

Yuge, Koretaka

2018-04-01

Short-range order (SRO) in disordered alloys is typically interpreted as competition between chemical effect of negative (or positive) energy gain by mixing constituent elements and geometric effects comes from difference in effective atomic radius. Although we have a number of theoretical approaches to quantitatively estimate SRO at given temperatures, it is still unclear to systematically understand trends in SRO for binary alloys in terms of geometric character, e.g., effective atomic radius for constituents. Since chemical effect plays significant role on SRO, it has been believed that purely geometric character cannot capture the SRO trends. Despite these considerations, based on the density functional theory (DFT) calculations on fcc-based 28 equiatomic binary alloys, we find that while conventional Goldschmidt or DFT-based atomic radius for constituents have no significant correlation with SRO, atomic radius for specially selected structure, constructed purely from information about underlying lattice, can successfully capture the magnitude of SRO. These facts strongly indicate that purely geometric information of the system plays central role to determine characteristic disordered structure.

Order and disorder in Ca2ND0.90H0.10-A structural and thermal study

International Nuclear Information System (INIS)

Verbraeken, Maarten C.; Suard, Emmanuelle; Irvine, John T.S.

2011-01-01

The structure of calcium nitride hydride and its deuterided form has been re-examined at room temperature and studied at high temperature using neutron powder diffraction and thermal analysis. When synthesised at 600 deg. C, a mixture of both ordered and disordered Ca 2 ND 0.90 H 0.10 phases results. The disordered phase is the minor component and has a primitive rocksalt structure (spacegroup Fm3m) with no ordering of D/N on the anion sites and the ordered phase is best described using the rhombohedral spacegroup R-3m with D and N arranged in alternate layers in (111) planes. This mixture of ordered and disordered phases exists up to 580 deg. C, at which the loss of deuterium yields Ca 2 ND 0.85 with the disappearance of the disordered phase. In the new ordered phase there exists a similar content of vacancies on both anion sites; to achieve this balance, a little N transfers onto the D site, whereas there is no indication of D transferring onto the N-sites. These observations are thought to indicate that the D/N ordering is difficult to achieve with fully occupied anion sites. It has previously been reported that Ca 2 ND has an ordered cubic cell with alternating D and N sites in the [100] directions ; however, for the samples studied herein, there were clearly two coexisting phases with apparent broadening/splitting of the primitive peaks but not for the ordered peaks. The rhombohedral phase was in fact metrically cubic; however, all the observed peaks were consistent with the rhombohedral unit cell with no peaks requiring the larger ordered cubic unit cell to be utilised. Furthermore this rhombohedral cell displays the same form of N-D ordering as the Sr and Ba analogues, which are metrically rhombohedral. - Graphical abstract: Ca 2 ND 0.90 H 0.10 forms a mixture of ordered and disordered phases when synthesised at 600 deg. C. The ordered phase disappears at high temperature upon release of structural deuterium/hydrogen, leaving a single, partially disordered

First results from the commissioning of the BGO-OD experiment at ELSA

Science.gov (United States)

Bella, Andreas

2014-11-01

The BGO-OD experiment at the ELSA accelerator facility in Bonn combines the highly segmented BGO calorimeter with a particle tracking magnetic spectrometer at forward angles. An extensive physics program using an energy tagged Bremsstrahlung photon beam is planned. The commissioning phase of the experiment is recently complete, enhancements for the BGO-OD experiment are nevertheless in development. Recent results from the analysis of the commissioning data, which includes particle track reconstruction in the forward spectrometer and momentum reconstruction with the BGO calorimeter are presented.

Factors Affecting Community Participation in O and OD Planning ...

African Journals Online (AJOL)

Factors Affecting Community Participation in O and OD Planning and ... great success at start but later dropped in number of cattle taken for dipping. ... and to establish the measures taken by the district leadership in addressing the problems.

Influence of hot rolling and high speed hydrostatic extrusion on the microstructure and mechanical properties of RAF ODS steel

International Nuclear Information System (INIS)

Oksiuta, Z.; Kurzydlowski, K.J.; Baluc, N.

2009-01-01

Argon gas atomized, pre-alloyed Fe-14Cr-2W-0.3Ti oxide dispersion strengthened (ODS) ferritic steel powder was mechanically alloyed with 0.3Y2O3 (wt.%) nano-particles in attritor ball mill and consolidated by hot isostatic pressing (HIP) at 1150 deg. C under pressure of 200 MPa for 3 hrs. To improve mechanical properties of as HIPped ODS ingots the material was undergone further thermo-mechanical treatment (TMT), namely: hot rolling (HR) at 850 deg. C or high speed hot extrusion (HSHE) at 850 deg. C. After TMT both materials were annealed at 1050 deg. C for 1 h in vacuum. Transmission electron microscopy (TEM) observations of the ODS alloys after TMT and heat treatment exhibited elongated in a longitudinal direction grains with an average size of 75 μm. However, an equiaxed, smaller than 500 nm grains were also found in the microstructure of both materials. Different size and morphology of oxides particles were also observed. Bigger, about 150 nm Ti-Al-O particles were usually located at grain boundaries whereas Y-Ti-O nanoclusters of about 5 nm were uniformly distributed in ODS steel matrix. The Charpy impact tests revealed significantly better about 90% (5.8 J) upper shelf energy (USE) of material after HSHE but ductile to brittle transition temperature (DBTT) of both alloys was unsatisfactory. As-HR ODS steel has shown DBTT of about 55 deg. C whereas HSHE ODS steel has about 75 deg. C. This relatively high values of transition temperature were probably caused by oxides particles present at grain boundaries of the ODS alloys which decreased fracture properties of the ODS steels. High temperature tensile properties of both ODS alloys are found to be satisfactory in full range of the testing temperature from 23 up to 750 deg. C. However, about 15% better UTS and YS0.2 (1350 MPa and 1285 MPa, respectively) as well as ductility were measured in the case of the as-HSHE ODS steel. These results indicates that HSHE process of the ODS steel can be considered as more

Chain Stretching and Order-Disorder Transitions in Block Copolymer Monolayers and Multilayers

Science.gov (United States)

Kramer, Edward J.; Mishra, Vindhya; Stein, Gila E.; Sohn, Karen E.; Hur, Sumi; Fredrickson, Glenn H.; Cochran, Eric W.

2009-03-01

Both monolayers of block copolymer cylinders and spheres undergo order to disorder transitions (ODT) at temperatures well below those of the bulk. Monolayers of PS-b-P2VP cylinders undergo a ``nematic'' to ``isotropic'' transition at temperatures about 20 K below the bulk ODT while monolayers of PS-b-P2VP with P2VP spheres undergo a 2D crystal to hexatic transition at least 10 K below the bulk ODT. Bilayers of each structure disorder at temperatures well above that of the monolayers. While one is tempted to attribute all of the difference to the fact that ordered monolayers are quasi 2 dimensional while bilayers are not, an alternative explanation exists. In the cylinder monolayer the corona PS chains must stretch to fill a nearly square cross-section domain rather than a hexagonal one in the bulk, while the corona PS chains in a sphere monolayer must stretch to fill a hexagonal prism rather than an octahedron in the bulk. The more non-uniform stretching of the chains in the monolayer should increase its free energy and decrease its order-disorder temperature.

Phase transformation order-disorder in nonstoichiometric titanium carbide

International Nuclear Information System (INIS)

Vlasov, V.A.; Karmo, Yu.S.; Kustova, L.V.

1986-01-01

Titanium carbide delta-phase is studied using the methods of electric conductivity and differential thermal analysis (DTA). It is shown on the Ti-C system phase diagram that two regions of TiCsub(0.46-0.60) and TiCsub(0.65-1.00) compositions, different in their properties, correspond to delta-phase. Both ordered and disordered phases exist within the TiCsub(0.046-0.60) concentration range, and in equilibrium heating or cooling one phase converts to another at 590 deg C (the first order phase transformation). Samples of the TiCsub(0.65-1.00) composition are characterized by low electric conductivity stability, that is explained by strong titanium carbide electric conductivity sensitivity to defects and impurities

BeP2: a tetrahedral structure of type order-disorder which obeys a coordination rule for short-range order

International Nuclear Information System (INIS)

L'Haridon, P.; David, J.; Lang, J.; Parthe, E.

1976-01-01

Single-crystal studies on BeP 2 indicate that this compound possesses an OD structure. The substructure has a tetragonal unit cell with: a = 3.546 A, c = 15.01 A, Z = 4, space group: I4 1 /amd. The final R factor has a value of 0.033. The atom sites in this substructure correspond to the sites of diamond if the latter is described with a tetragonal cell, where a = (2/sup 1/2//a/sub diamond/ and c = 3a/sub diamond/. A short-range order governs the occupation of these sites with Be and P atoms. Each Be has four tetrahedral P neighbors and every P has two Be and two P neighbors. Consideration of the maxima on the diffuse streaks between the sharp reflectins of the substructure leads to an intermediate unit cell with a = 7.09 A and c = 30.02 A. Coordination considerations allow a structure proposal to be formulated for this intermediate structure which is triclinic but pseudotetragonal. The true unit cell is also pseudotetragonal with a = 7.09 A and c = N . 15.01 A, where N is a large integer

Computational Design of Animated Mechanical Characters

Science.gov (United States)

Coros, Stelian; Thomaszewski, Bernhard; DRZ Team Team

2014-03-01

A factor key to the appeal of modern CG movies and video-games is that the virtual worlds they portray place no bounds on what can be imagined. Rapid manufacturing devices hold the promise of bringing this type of freedom to our own world, by enabling the fabrication of physical objects whose appearance, deformation behaviors and motions can be precisely specified. In order to unleash the full potential of this technology however, computational design methods that create digital content suitable for fabrication need to be developed. In recent work, we presented a computational design system that allows casual users to create animated mechanical characters. Given an articulated character as input, the user designs the animated character by sketching motion curves indicating how they should move. For each motion curve, our framework creates an optimized mechanism that reproduces it as closely as possible. The resulting mechanisms are attached to the character and then connected to each other using gear trains, which are created in a semi-automated fashion. The mechanical assemblies generated with our system can be driven with a single input driver, such as a hand-operated crank or an electric motor, and they can be fabricated using rapid prototyping devices.

REVIEWS OF TOPICAL PROBLEMS: Order-disorder transformations and phase equilibria in strongly nonstoichiometric compounds

Science.gov (United States)

Gusev, Aleksandr I.

2000-01-01

Data on order-disorder phase transformations in strongly nonstoichiometric carbides and nitrides MXy (X=C, N) of Group IV and V transition metals at temperatures below 1300-1400 K are reviewed. The order-parameter functional method as applied to atomic and vacancy ordering in strongly nonstoichiometric MXy compounds and to phase equilibrium calculations for M-X systems is discussed. Phase diagram calculations for the Ti-C, Zr-C, Hf-C, V-C, Nb-C, Ta-C, Ti-N, and Ti-B-C systems (with the inclusion of the ordering of nonstoichiometric carbides and nitrides) and those for pseudobinary carbide M(1)C-M(2)C systems are presented. Heat capacity, electrical resistivity and magnetic susceptibility changes at reversible order-disorder phase transformations in nonstoichiometric carbides are considered.

Order-disorder transformation in the Ni-4.49 at.% Al alloy

International Nuclear Information System (INIS)

Adorno, A.T.; Garlipp, W.; Cilense, M.; Silva, R.A.G.

2006-01-01

The order-disorder transformation in the Ni-4.49 at.% Al alloy was studied using electrical resistivity measurements, microhardness measurements, differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). The results confirmed the ordering behavior expected for Ni-Al dilute alloys and the suggested relation between resistivity changes and microhardness changes with anti-ferromagnetic spin ordering. The higher value obtained for the activation energy of vacancy migration was associated with a decrease in the Al concentration gradient near solute-depleted regions

Group characters, symmetric functions, and the Hecke algebra

CERN Document Server

Goldschmidt, David M

1993-01-01

Directed at graduate students and mathematicians, this book covers an unusual set of interrelated topics, presenting a self-contained exposition of the algebra behind the Jones polynomial along with various excursions into related areas. The book is made up of lecture notes from a course taught by Goldschmidt at the University of California at Berkeley in 1989. The course was organized in three parts. Part I covers, among other things, Burnside's Theorem that groups of order p^aq^b are solvable, Frobenius' Theorem on the existence of Frobenius kernels, and Brauer's characterization of characters. Part II covers the classical character theory of the symmetric group and includes an algorithm for computing the character table of S^n ; a construction of the Specht modules; the "determinant form" for the irreducible characters; the hook-length formula of Frame, Robinson, and Thrall; and the Murnaghan-Nakayama formula. Part III covers the ordinary representation theory of the Hecke algebra, the construction of the ...

Electronic structure of ordered and disordered Fe sub 3 Pt

CERN Document Server

Major, Z; Jarlborg, T; Bruno, E; Ginatempo, B; Staunton, J B; Poulter, J

2003-01-01

The electronic structure of invar alloys (i.e. materials in which the near absence of thermal expansion is observed) has been the focus of much study, owing both to the technological applications of these materials and interest in the fundamental mechanism that is responsible for the effect. Here, calculations of the magnetic Compton profiles are presented for ordered and disordered Fe sub 3 Pt alloys. Using linear muffin-tin orbital and KKR methods, the latter incorporating the coherent potential approximation to describe the substitutional disorder, the electronic band structure and measurable quantities such as the Fermi surface topology are presented.

Microstructure and Mechanical Property of ODS Ferritic Steels Using Commercial Alloy Powders for High Temperature Service Applications

Energy Technology Data Exchange (ETDEWEB)

Noh, Sanghoon; Choi, Byoung-Kwon; Kang, Suk Hoon; Kim, Tae Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Oxide dispersion strengthening (ODS) is one of the promising ways to improve the mechanical property at high temperatures. This is mainly attributed to uniformly distributed nano-oxide particle with a high density, which is extremely stable at the high temperature and acts as effective obstacles when the dislocations are moving. In this study, as a preliminary examination to develop the advanced structural materials for high temperature service applications, ODS ferritic steels were fabricated using commercial alloy powders and their microstructural and mechanical properties were investigated. In this study, ODS ferritic steels were fabricated using commercial stainless steel 430L powder and their microstructures and mechanical properties were investigated. Morphology of micro-grains and oxide particles were significantly changed by the addition of minor alloying elements such as Ti, Zr, and Hf. The ODS ferritic steel with Zr and Hf additions showed ultra-fine grains with fine complex oxide particles. The oxide particles were uniformly located in grains and on the grain boundaries. This led to higher hardness than ODS ferritic steel with Ti addition.

Effectiveness of narcotics anonymous training programs in personality characters in substance abuse patients

Directory of Open Access Journals (Sweden)

Namat Sotodeh Asl

2013-03-01

Full Text Available Introduction: Substance abuse is one of the most common disorders that exert a high impact on the life of patients and their families. There are many treatment methods for Addiction. The purpose of the present study was to determine the effects of narcotics anonymous (NA program on personality characters in substance abuse patients.Materials and Methods: This quasi experimental design was performed on 100 patients with substance abuse disorders that they had been randomly selected from those patients who were referred to psychiatric clinics and counseling centers in Esfehan in 2008. Then, the subjects were equally divided into two groups; experimental and control. All the patients carried out Eysenk test prior to any intervention and also a demographic questionnaire were filled out by all the subjects. Then, Eysenk test was performed on all the patients following the intervention. Changing in personality character in the experimental group (before and after the intervention was compared with those of the control group. Results: The findings showed that narcotic program has significant effects on personality characters of experimental group to substance abuse in post test, but these effects are not significant in control group.Conclusion: According to the findings of this work, we suggest the effectiveness of NA program in changing personality characters of the patients with substance abuse

Inheritance of characters in kenaf (Hibiscus cannabinus)

African Journals Online (AJOL)

SERVER

2008-04-03

David and Adam, 1988). The plant belongs to the order Malvales, the family Malvaceae and the genus Hibiscus ... The varieties in relation to the character studied are as follows: NRG-NG-R5: Pink flowers with resistance to root ...

Lattice Supersymmetry and Order-Disorder Coexistence in the Tricritical Ising Model

Science.gov (United States)

O'Brien, Edward; Fendley, Paul

2018-05-01

We introduce and analyze a quantum spin or Majorana chain with a tricritical Ising point separating a critical phase from a gapped phase with order-disorder coexistence. We show that supersymmetry is not only an emergent property of the scaling limit but also manifests itself on the lattice. Namely, we find explicit lattice expressions for the supersymmetry generators and currents. Writing the Hamiltonian in terms of these generators allows us to find the ground states exactly at a frustration-free coupling. These confirm the coexistence between two (topologically) ordered ground states and a disordered one in the gapped phase. Deforming the model by including explicit chiral symmetry breaking, we find the phases persist up to an unusual chiral phase transition where the supersymmetry becomes exact even on the lattice.

Radiation Stability of Nanoclusters in Nano-structured Oxide Dispersion Strengthened (ODS) Steels

International Nuclear Information System (INIS)

Certain, Alicia G.; Kuchibhatla, Satyanarayana; Shutthanandan, V.; Allen, T. R.

2013-01-01

Nanostructured oxide dispersion strengthened (ODS) steels are considered candidates for nuclear fission and fusion applications at high temperature and dose. The complex oxide nanoclusters in these alloys provide high-temperature strength and are expected to afford better radiation resistance. Proton, heavy ion, and neutron irradiations have been performed to evaluate cluster stability in 14YWT and 9CrODS steel under a range of irradiation conditions. Energy-filtered transmission electron microscopy and atom probe tomography were used in this work to analyze the evolution of the oxide population.

Parents' personality clusters and eating disordered daughters' personality and psychopathology.

Science.gov (United States)

Amianto, Federico; Ercole, Roberta; Marzola, Enrica; Abbate Daga, Giovanni; Fassino, Secondo

2015-11-30

The present study explores how parents' personality clusters relate to their eating disordered daughters' personality and psychopathology. Mothers and fathers were tested with the Temperament Character Inventory. Their daughters were assessed with the following: Temperament and Character Inventory, Eating Disorder Inventory-2, Symptom Checklist-90, Parental Bonding Instrument, Attachment Style Questionnaire, and Family Assessment Device. Daughters' personality traits and psychopathology scores were compared between clusters. Daughters' features were related to those of their parents. Explosive/adventurous mothers were found to relate to their daughters' borderline personality profile and more severe interoceptive awareness. Mothers' immaturity was correlated to their daughters' higher character immaturity, inadequacy, and depressive feelings. Fathers who were explosive/methodic correlated with their daughters' character immaturity, severe eating, and general psychopathology. Fathers' character immaturity only marginally related to their daughters' specific features. Both parents' temperament clusters and mothers' character clusters related to patients' personality and eating psychopathology. The cluster approach to personality-related dynamics of families with an individual affected by an eating disorder expands the knowledge on the relationship between parents' characteristics and daughters' illness, suggesting complex and unique relationships correlating parents' personality traits to their daughters' disorder. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Order-disorder antiferroelectric phase transition in a hybrid inorganic-organic framework with the perovskite architecture.

Science.gov (United States)

Jain, Prashant; Dalal, Naresh S; Toby, Brian H; Kroto, Harold W; Cheetham, Anthony K

2008-08-13

[(CH3)2NH2]Zn(HCOO)3, 1, adopts a structure that is analogous to that of a traditional perovskite, ABX3, with A = [(CH3)2NH2], B = Zn, and X = HCOO. The hydrogen atoms of the dimethyl ammonium cation, which hydrogen bond to oxygen atoms of the formate framework, are disordered at room temperature. X-ray powder diffraction, dielectric constant, and specific heat data show that 1 undergoes an order-disorder phase transition on cooling below 156 K. We present evidence that this is a classical paraelectric to antiferroelectric phase transition that is driven by ordering of the hydrogen atoms. This sort of electrical ordering associated with order-disorder phase transition is unprecedented in hybrid frameworks and opens up an exciting new direction in rational synthetic strategies to create extended hybrid networks for applications in ferroic-related fields.

Initial Development in Joining of ODS Alloys Using Friction Stir Welding

Energy Technology Data Exchange (ETDEWEB)

Ren, Weiju [ORNL; Feng, Zhili [ORNL

2007-08-01

Solid-state welding of oxide-dispersion-strengthened (ODS) alloy MA956 sheets using friction stir welding (FSW) was investigated. Butt weld was successfully produced. The weld and base metals were characterized using optical microscopy, scanning electronic microscopy, transmission electronic microscopy, and energy dispersion x-ray spectrum. Microhardness mapping was also conducted over the weld region. Analyses indicate that the distribution of the strengthening oxides was preserved in the weld. Decrease in microhardness of the weld was observed but was insignificant. The preliminary results seem to confirm the envisioned feasibility of FSW application to ODS alloy joining. For application to Gen IV nuclear reactor heat exchanger, further investigation is suggested.

The order-disorder transition in Cu{sub 2}ZnSnS{sub 4}: A theoretical and experimental study

Energy Technology Data Exchange (ETDEWEB)

Quennet, Marcel, E-mail: marcel.quennet@fu-berlin.de [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Institut für Chemie und Biochemie, Freie Universität Berlin, Takustraße 3, 14195 Berlin (Germany); Ritscher, Anna [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Institut für Chemie, Technische Universität Berlin, Straße des 17. Juni 135, 10623 Berlin (Germany); Lerch, Martin [Institut für Chemie, Technische Universität Berlin, Straße des 17. Juni 135, 10623 Berlin (Germany); Paulus, Beate [Institut für Chemie und Biochemie, Freie Universität Berlin, Takustraße 3, 14195 Berlin (Germany)

2017-06-15

In this work the Cu/Zn order-disorder transition in Cu{sub 2}ZnSnS{sub 4} kesterites on Wyckoff positions 2c and 2d was investigated by a structural and electronic analysis in theory and experiment. For experimental investigations stoichiometric samples with different Cu/Zn order, annealed in the temperature range of 473–623 K and afterwards quenched, were used. The optical gaps were determined using the Derivation of Absorption Spectrum Fitting (DASF) method. Furthermore, the order-disorder transition was examined by DFT calculations for a closer analysis of the origins of the reduced band gap, showing a good agreement with experimental data with respect to structural and electronic properties. Our studies show a slight increase of lattice parameter c in the kesterite lattice with increasing disorder. Additionally, a reduced band gap was observed with increasing disorder, which is an effect of newly occurring binding motifs in the disordered kesterite structure. - Highlights: • Experimental and theoretical investigation on the order-disorder transition in kesterites. • Slight enlargements of lattice constants due to disorder in experiment and theory. • Strong band gap fluctuations with decreasing order. • Electronic structure deviations due to changing binding motifs. • Disorder as possible main source of low open-circuit voltages.

Microstructure characterization and strengthening mechanisms of oxide dispersion strengthened (ODS) Fe-9%Cr and Fe-14%Cr extruded bars

Science.gov (United States)

Chauhan, A.; Bergner, F.; Etienne, A.; Aktaa, J.; de Carlan, Y.; Heintze, C.; Litvinov, D.; Hernandez-Mayoral, M.; Oñorbe, E.; Radiguet, B.; Ulbricht, A.

2017-11-01

The collaborative study is focused on the relationship between microstructure and yield stress for an ODS Fe-9%Cr-based transformable alloy and an ODS Fe-14%Cr-based ferritic alloy. The contributions to the total room temperature yield stress arising from various strengthening mechanisms are addressed on the basis of a comprehensive description of the microstructures uncovered by means of transmission electron microscopy (TEM), electron backscatter diffraction (EBSD), small-angle neutron scattering (SANS) and atom probe tomography (APT). While these methods provide a high degree of complementarity, a reasonable agreement was found in cases of overlap of information. The derived set of microstructure parameters along with reported strengthening equations was used to calculate the room temperature yield stress. The estimates were critically compared with the measured yield stress for an extended set of alloys including data reported for Fe-Cr model alloys and steels thus covering one order of magnitude or more in grain size, dislocation density, particle density and yield stress. The comparison shows that particle strengthening, dislocation forest strengthening, and Hall-Petch strengthening are the major contributions and that a mixed superposition rule reproduces the measured yield stress within experimental scatter for the whole extended set of alloys. The wide variation of microstructures additionally underpins the conclusions and goes beyond previous work, in which one or few ODS steels and narrow microstructure variations were typically covered.

Energy-filtered TEM imaging and EELS study of ODS particles and argon-filled cavities in ferritic-martensitic steels.

Science.gov (United States)

Klimiankou, M; Lindau, R; Möslang, A

2005-01-01

Oxide-dispersion-strengthened (ODS) ferritic-martensitic steels with yttrium oxide (Y(2)O(3)) have been produced by mechanical alloying and hot isostatic pressing for use as advanced material in fusion power reactors. Argon gas, usually widely used as inert gas during mechanical alloying, was surprisingly detected in the nanodispersion-strengthened materials. Energy-filtered transmission electron microscopy (EFTEM) and electron energy loss spectroscopy (EELS) led to the following results: (i) chemical composition of ODS particles, (ii) voids with typical diameters of 1-6 nm are formed in the matrix, (iii) these voids are filled with Ar gas, and (iv) the high-density nanosized ODS particles serve as trapping centers for the Ar bubbles. The Ar L(3,2) energy loss edge at 245 eV as well as the absorption features of the ODS particle elements were identified in the EELS spectrum. The energy resolution in the EEL spectrum of about 1.0 eV allows to identify the electronic structure of the ODS particles.

Character animation fundamentals developing skills for 2D and 3D character animation

CERN Document Server

Roberts, Steve

2012-01-01

Expand your animation toolkit and remain competitive in the industry with this leading resource for 2D and 3D character animation techniques. Apply the industry's best practices to your own workflows and develop 2D, 3D and hybrid characters with ease. With side by side comparisons of 2D and 3D character design, improve your character animation and master traditional principles and processes including weight and balance, timing and walks. Develop characters inspired by humans, birds, fish, snakes and four legged animals. Breathe life into your character and develop a characters personality w

Order-disorder transitions in C60 and C70

International Nuclear Information System (INIS)

Ramasesha, S.K.

1995-01-01

In recent years enormous effort has been put in understanding the chemical and physical properties of C 60 and C 70 . Order-disorder transition in C 60 occurs around 250 K at ambient pressure. At the transition freely rotating molecules get orientationally ordered in a simple cubic lattice. Application of pressure increases the transition temperature at a rate of ≅ 10 K kbar -1 , indicating that pressure favours the ordered state. The DSC and x-ray studies on C 70 indicate two phase transitions, one around 270 K and the other around 340 K at room pressure. These transitions also occur at higher temperatures at higher pressures. Application of pressure is found to lift the degeneracy of the energetically equivalent rotational configurations. The high pressure studies are reviewed in the light of existing literature. (author)

Dipolar magnetism in ordered and disordered low-dimensional nanoparticle assemblies

DEFF Research Database (Denmark)

Varón, M.; Beleggia, M; Kasama, T

2013-01-01

order at ambient temperature in assemblies of closely-spaced nanoparticles with magnetic moments of ≥ 100 μ(B). Here we use electron holography with sub-particle resolution to reveal the correlation between particle arrangement and magnetic order in self-assembled 1D and quasi-2D arrangements of 15 nm...... cobalt nanoparticles. In the initial states, we observe dipolar ferromagnetism, antiferromagnetism and local flux closure, depending on the particle arrangement. Surprisingly, after magnetic saturation, measurements and numerical simulations show that overall ferromagnetic order exists in the present...... nanoparticle assemblies even when their arrangement is completely disordered. Such direct quantification of the correlation between topological and magnetic order is essential for the technological exploitation of magnetic quasi-2D nanoparticle assemblies....

Experimental study of the reactions of limonene with OH and OD radicals: kinetics and products.

Science.gov (United States)

Braure, Tristan; Bedjanian, Yuri; Romanias, Manolis N; Morin, Julien; Riffault, Véronique; Tomas, Alexandre; Coddeville, Patrice

2014-10-09

The kinetics of the reactions of limonene with OH and OD radicals has been studied using a low-pressure flow tube reactor coupled with a quadrupole mass spectrometer: OH + C10H16 → products (1), OD + C10H16 → products (2). The rate constants of the title reactions were determined using four different approaches: either monitoring the kinetics of OH (OD) radicals or limonene consumption in excess of limonene or of the radicals, respectively (absolute method), and by the relative rate method using either the reaction OH (OD) + Br2 or OH (OD) + DMDS (dimethyl disulfide) as the reference one and following HOBr (DOBr) formation or DMDS and limonene consumption, respectively. As a result of the absolute and relative measurements, the overall rate coefficients, k1 = (3.0 ± 0.5) × 10(-11) exp((515 ± 50)/T) and k2 = (2.5 ± 0.6) × 10(-11) exp((575 ± 60)/T) cm(3) molecule(-1) s(-1), were determined at a pressure of 1 Torr of helium over the temperature ranges 220-360 and 233-353 K, respectively. k1 was found to be pressure independent over the range 0.5-5 Torr. There are two possible pathways for the reaction between OH (OD) and limonene: addition of the radical to one of the limonene double bonds (reactions 1a and 2a ) and abstraction of a hydrogen atom (reactions 1b and 2b ), resulting in the formation of H2O (HOD). Measurements of the HOD yield as a function of temperature led to the following branching ratio of the H atom abstraction channel: k2b/k2 = (0.07 ± 0.03) × exp((460 ± 140)/T) for T = (253-355) K.

Microstructural Characterization of Y{sub 2}O{sub 3} ODS-Fe-Cr Model Alloy s

Energy Technology Data Exchange (ETDEWEB)

De Castro, V.; Jenkins, M.L. [Oxford Univ., Dept. of Materials (United Kingdom); Leguey, T.; Mufioz, A.; Pareja, R.; Monge, M.A. [Madrid Univ. Carlos 3, Dept. de Fisica (Spain)

2007-07-01

Full text of publication follows: Reduced activation ferritic/martensitic (RAFM) steels with Cr contents ranging between 9-12 wt% are promising candidates for use as structural materials in future fusion reactors. They are likely to be superior to austenitic steels because of their better thermal properties and higher swelling resistance. A major concern of these materials is their maximum service temperature, as this determines the overall efficiency of the reactor. It has been demonstrated that one way to increase this temperature is to homogeneously disperse hard nano-sized oxide particles, such as Y{sub 2}O{sub 3}, into the steel matrix. Oxide dispersion strengthened (ODS) steels produced by mechanical milling and hot isostatic pressing (HIP ) are considered as potential structural materials for fusion reactors. In Europe, efforts have been focused on the ODS-RAFM-9CrW steel EUROFER. These ODS steels show good tensile and creep properties, acceptable ductility, but poor impact properties. Microstructural characterization of real steels, especially of the structures of oxide/steel matrix interfaces which play an important role in the performance of the material, is a difficult task. In the present work we have fabricated and characterised a simpler model ODS system based on a Fe-Cr binary alloy, in the belief that this will help us better to understand complex ODS-RAFM steels. Two Fe-12wt% Cr batches, one containing 0.3 wt% Y{sub 2}O{sub 3} and the other Y{sub 2}O{sub 3} free have been produced by milling plus compaction by HIP. These materials are being characterized by X-ray diffraction, electron microscopy and atom probe field ion microscopy. Results will be compared with those obtained for ODS-EUROFER produced under the same conditions. (authors)

Effect of HIP temperature and cooling rate on microstructure and hardness of joints for ODS-RAFM steels and JLF-1 steel

International Nuclear Information System (INIS)

Fu, Haiying; Nagasaka, Takuya; Muroga, Takeo; Kimura, Akihiko; Ukai, Shigeharu

2016-01-01

Dissimilar-metal joints between ODS-RAFM (oxide-dispersion-strengthened reduced activation ferritic/martensitic) steels and JLF-1 steel were fabricated by hot isostatic pressing (HIP) at 1000 - 1100degC with a cooling rate of 5degC/min. After the HIP, it was always quenched martensite for JLF-1 steel. However, coarse precipitates were found in 9Cr-ODS. Additional annealing experiments to simulate HIP conditions were conducted for 9Cr-ODS with cooling rate ranged from 0.5 to 36degC/min at 800 - 1100degC. The results showed that, to form quenched martensite for 9Cr-ODS, the HIP temperature should be above 1000degC with cooling rate no less than 25dgeC/min. When the cooling rate is increased to 36degC/min, the microstructure of 9Cr-ODS is quenched martensite with precipitate size similar as that before HIP. If the limitation of precipitate size in 9Cr-ODS is 0.2 µm, HIP temperature above 1050degC with cooling rate no less than 30degC/min is needed. In this case, post-weld heat treatment (PWHT) with only tempering is necessary to recover the microstructure of 9Cr-ODS to tempered martensite. For 12Cr-ODS, the HIP temperature and cooling rate has no effect on hardness and precipitate size. PWHT is not necessary for the single-metal joint of 12Cr-ODS from the view point of precipitation control. However, for the dissimilar-metal joints between ODS-RAFM steels and JLF-1 steel, the PWHT condition should be comprehensively determined by considering microstructural evolution of each part in the joints after HIP. (author)

On the total character of finite groups

Directory of Open Access Journals (Sweden)

Sunil Kumar Prajapati

2014-09-01

Full Text Available For a finite group $G$, we study the total character $tau_G$ afforded by the direct sum of all the non-isomorphic irreducible complex representations of $G$. We resolve for several classes of groups (the Camina $p$-groups, the generalized Camina $p$-groups, the groups which admit $(G,Z(G$ as a generalized Camina pair, the problem of existence of a polynomial $f(x in mathbb{Q}[x]$ such that $f(chi = tau_G$ for some irreducible character $chi$ of $G$. As a consequence, we completely determine the $p$-groups of order at most $p^5$ (with $p$ odd which admit such a polynomial. We deduce the characterization that these are the groups $G$ for which $Z(G$ is cyclic and $(G,Z(G$ is a generalized Camina pair and, we conjecture that this holds good for $p$-groups of any order.

Precipitates and boundaries interaction in ferritic ODS steels

Energy Technology Data Exchange (ETDEWEB)

Sallez, Nicolas, E-mail: nicolas.sallez@simap.grenoble-inp.fr [Univ. Grenoble Alpes, SIMAP, F-38000 Grenoble (France); Hatzoglou, Constantinos [Groupe de Physique des Matériaux, Université et INSA de Rouen, UMR CNRS 6634, Normandie Université (France); Delabrouille, Fredéric [EDF–EDF R& D, Les Renardières, 77818 Moret-sur-Loing (France); Sornin, Denis; Chaffron, Laurent [CEA, DEN, Service de Recherches Métallurgiques Appliqué, 91191 Gif-sur-Yvette (France); Blat-Yrieix, Martine [EDF–EDF R& D, Les Renardières, 77818 Moret-sur-Loing (France); Radiguet, Bertrand; Pareige, Philippe [Groupe de Physique des Matériaux, Université et INSA de Rouen, UMR CNRS 6634, Normandie Université (France); Donnadieu, Patricia; Bréchet, Yves [Univ. Grenoble Alpes, SIMAP, F-38000 Grenoble (France)

2016-04-15

In the course of a recrystallization study of Oxide Dispersion Strengthened (ODS) ferritic steels during extrusion, particular interest was paid to the (GB) Grain Boundaries interaction with precipitates. Complementary and corresponding characterization experiments using Transmission Electron Microscopy (TEM), Energy Dispersive X-ray spectroscopy (EDX) and Atom Probe Tomography (APT) have been carried out on a voluntarily interrupted extrusion or extruded samples. Microscopic observations of Precipitate Free Zones (PFZ) and precipitates alignments suggest precipitate interaction with migrating GB involving dissolution and Oswald ripening of the precipitates. This is consistent with the local chemical information gathered by EDX and APT. This original mechanism for ODS steels is similar to what had been proposed in the late 80s for similar observation made on Ti alloys reinforced by nanosized yttrium oxides: An interaction mechanism between grain boundaries and precipitates involving a diffusion controlled process of precipitates dissolution at grain boundaries. It is believed that this mechanism can be of primary importance to explain the mechanical behaviour of such steels. - Highlights: • To study the microstructural evolution of a ferritic ODS steel during its extrusion, observations have been carried on samples resulting from a voluntarily interrupted extrusion and extruded materials. • A highly heterogeneous precipitate population have been observed. Nanosized coherent precipitates (2–5 nm) on both sides of the grain boundaries despite grain boundary migration after precipitation due to further thermo-mechanical processing as well as coarse precipitates (10–40 nm) alignments are observed on the grain boundaries and within the grains, parallel to the grain boundaries. • Asymmetrical PFZs can be observed around precipitates alignments and grain boundaries. Using TEM with EDX and APT we have been able to ensure that the PFZs are chemically depleted. �

Creep-rupture tests on chromium-containing conventional and ODS steels in oxygen-controlled Pb and air at 650 °C

International Nuclear Information System (INIS)

Yurechko, Mariya; Schroer, Carsten; Wedemeyer, Olaf; Skrypnik, Aleksandr; Konys, Jürgen

2014-01-01

Highlights: • Generally superior creep performance of ODS steels with 12–14% Cr is indicated. • Strength of 9Cr-ODS at 650°C approaches conventional 9Cr steels at decreasing load. • ODS steels show brittle primary and ductile residual fracture. • Apparent link between secondary creep rate and fracture mode of ODS steels. • Clear impact of liquid Pb at low load, corresponding to long time-to-rupture. - Abstract: Conventional martensitic steels with 9 mass% chromium (Cr), namely T91 and P92, and ODS steels with 9, 12 and 14 mass% Cr, respectively, were subjected to creep-rupture tests in stagnant oxygen-controlled lead (Pb) at 650 °C and c o = 10 −6 mass% dissolved oxygen. The 9Cr conventional steels were tested in the liquid metal at static engineering stress in the range from 75 to 200 MPa. 12 and 14Cr ODS were tested at 190–400 MPa, and 9Cr ODS at 75–300 MPa. Reference tests in stagnant air were carried out in the same stress ranges. The ODS steels with 12 or 14 mass% Cr, mainly tested in oxygen containing Pb, clearly exhibit a change in the stress-dependence of secondary creep rate and appearance of fracture surface at 330–400 MPa. No such change has been observed for 9Cr ODS so far. The conventional martensitic steel P92 shows a significant drop in creep strength accompanied by reduced necking and a change from ductile to brittle fracture when tested in Pb at 75 MPa (time-to-rupture t R = 13,090 h)

Differences in psychopathology and behavioral characteristics of patients affected by conversion motor disorder and organic dystonia.

Science.gov (United States)

Pastore, Adriana; Pierri, Grazia; Fabio, Giada; Ferramosca, Silvia; Gigante, Angelo; Superbo, Maria; Pellicciari, Roberta; Margari, Francesco

2018-01-01

Typically, the diagnosis of conversion motor disorder (CMD) is achieved by the exclusion of a wide range of organic illnesses rather than by applying positive criteria. New diagnostic criteria are highly needed in this scenario. The main aim of this study was to explore the use of behavioral features as an inclusion criterion for CMD, taking into account the relationship of the patients with physicians, and comparing the results with those from patients affected by organic dystonia (OD). Patients from the outpatient Movement Disorder Service were assigned to either the CMD or the OD group based on Fahn and Williams criteria. Differences in sociodemographics, disease history, psychopathology, and degree of satisfaction about care received were assessed. Patient-neurologist agreement about the etiological nature of the disorder was also assessed using the k -statistic. A logistic regression analysis estimated the discordance status as a predictor to case/control status. In this study, 31 CMD and 31 OD patients were included. CMD patients showed a longer illness life span, involvement of more body regions, higher comorbidity with anxiety, depression, and borderline personality disorder, as well as higher negative opinions about physicians' delivering of proper care. Contrary to our expectations, CMD disagreement with neurologists about the etiological nature of the disorder was not statistically significant. Additional analysis showed that having at least one personality disorder was statistically associated with the discordance status. This study suggests that CMD patients show higher conflicting behavior toward physicians. Contrary to our expectations, they show awareness of their psychological needs, suggesting a possible lack of recognition of psychological distress in the neurological setting.

Development of ODS ferritic-martensitic steels for application to high temperature and irradiation environment; Developpement d'une nouvelle nuance martensitique ODS pour utilisation sous rayonnement a haute temperature

Energy Technology Data Exchange (ETDEWEB)

Lambard, V

2000-07-01

Iron oxide dispersion strengthened alloys are candidate for nuclear fuel cladding. Therefore, it is crucial to control their microstructure in order to optimise their mechanical properties at temperatures up to 700 deg C. The industrial candidates, ODS ferritic alloys, present an anisotropic microstructure which induces a weakening of mechanical properties in transversal direction as well as the precipitation of brittle phases under thermal aging and irradiation. For this purpose, we tried to develop a material with isotropic properties. We studied several 9Cr-1Mo ferritic/martensitic alloys, strengthened or not by oxide dispersion. The mechanical alloying was performed by attribution and powders were consolidated by hot extrusion. In this work, different metallurgical characterisation techniques and modelling were used to optimise a new martensitic ODS alloy. Microstructural and chemical characterization of matrix has been done. The effect of austenitizing and isochronal tempering treatments on microstructure and hardness has been studied. Oxide distribution, size and chemical composition have been studied before and after high temperature thermal treatment. The study of phase transformation upon heating has permitted the extrapolation to the equilibrium temperature formation of austenite. Phase transformation diagrams upon cooling have been determined and the transformation kinetics have been linked to austenite grain size by a simple relation. Fine grain size is unfavourable for the targeted application, so a particular thermal treatment inducing a coarser grain structure has been developed. Finally, tensile properties have been determined for the different microstructures. (author)

The laser beam welding test of ODS fuel claddings

International Nuclear Information System (INIS)

Uwaba, Tomoyuki; Ukai, Shigeharu

2004-06-01

As a alternative method of pressurized resistance welding being currently developed, integrity evaluations for a laser beam welding joint between a ODS cladding tube and a FMS end plug were conducted for the purpose of studying the applicability of the laser beam welding technique to the welding with the lower end plug. The laser beam welding causes blowholes in the welding zone, whose effect on the high cycle fatigue strength of the joint is essential because of the flow-induced vibration during irradiation. The rotary bending tests using specimens with laser beam welding between ODS cladding tubes and FMS end plugs were carried out to evaluate the fatigue strength of the welding joint containing blowholes. The fatigue limit of stress amplitude about 200 MPa from 10 6 -10 7 cycles suggested that the laser beam welding joint had enough strength against the flow-induced vibration. Sizing of blowholes in the welding zone by using a micro X ray CT technique estimated the rate of defect areas due to blowholes at 1-2%. It is likely that the fatigue strength remained nearly unaffected by blowholes because of the no correlation between the breach of the rotary bending test specimen and the rate of defect area. Based on results of tensile test, internal burst test, Charpy impact test and fatigue test of welded zone, including study of allowable criteria of blowholes in the inspection, it is concluded that the laser beam welding can be probably applied to the welding between the ODS cladding tube and the FMS lower end plug. (author)

Main Achievements 2003-2004 - Condensed Matter Studies - Electronic structure of disordered alloys studied by Compton scattering

International Nuclear Information System (INIS)

2005-01-01

3D momentum density and the Fermi surface of disordered Cu 0.86 Al 0.16 alloy were reconstructed from high-resolution Compton profiles. The effect known as ''nesting'' of the Fermi surface was revealed (cooperation with KEK, Tsukuba, Japan). This feature of the Fermi surface, when present, is believed to lead to local ordering phenomena in disordered systems. Our electron diffraction studies showed that a short-range order was indeed present in the alloy. Moreover, the character of the diffuse scattering (the four-fold splitting of the diffuse spots) pointed to the ''nesting'' of the Fermi surface as the origin of this ordering. The results lend support to the notion that the formation of the short-range order in nondiluted, disordered alloys can be driven by their electronic properties like the shape of the Fermi surface

The effects of dissolved organic matter and feeding on bioconcentration and oxidative stress of ethylhexyl dimethyl p-aminobenzoate (OD-PABA) to crucian carp (Carassius auratus).

Science.gov (United States)

Ma, Binni; Lu, Guanghua; Yang, Haohan; Liu, Jianchao; Yan, Zhenhua; Nkoom, Matthew

2018-03-01

Bioconcentration of UV filters in organisms is an important indicator for the assessment of environmental hazards. However, bioconcentration testing rarely accounts for the influence of natural aquatic environmental factors. In order to better assess the ecological risk of organic UV filters (OUV-Fs) in an actual water environment, this study determined the influences of dissolved organic matter (DOM) (0, 1, 10, and 20 mg/L) and feeding (0, 0.5, 1, and 2% body weight/d) on bioconcentration of ethylhexyl dimethyl p-aminobenzoate (OD-PABA) in various tissues of crucian carp (Carassius auratus). Moreover, oxidative stress in the fish liver caused by the OD-PABA was also investigated by measuring activities of superoxide dismutase (SOD), catalase (CAT) and glutathione S-transferase (GST), and levels of glutathione (GSH) and malondialdehyde (MDA). The bioconcentration of OD-PABA in the fish tissues was significantly decreased with the presence of DOM indicating a reduction of OD-PABA bioavailability caused by DOM. The bioconcentration factors (BCFs) decreased by 28.00~50.93% in the muscle, 72.67~96.74% in the gill, 37.84~87.72% in the liver, and 10.32~79.38% in the kidney at different DOM concentrations compared to those of the non-DOM treatments. Significant changes in SOD, CAT, GST, GSH, and MDA levels were found in the DOM- and OD-PABA-alone treatments. However, there were no significant differences in the SOD, CAT, GST, and MDA levels found when co-exposure to OD-PABA and DOM. Feeding led to lower OD-PABA concentrations in the fish tissues, and the concentrations were decreased with increasing feeding ratios. BCFs in various tissues reduced by 39.75~72.52% in the muscle, 56.86~79.73% in the gill, 66.41~87.50% in the liver, and 75.88~89.10% in the kidney, respectively. In the unfed treatments, the levels of SOD and MDA were significantly higher than those of the fed ones while GST and GSH levels were remarkably inhibited indicating the enhanced effect of starvation

Efficient learning strategy of Chinese characters based on network approach.

Directory of Open Access Journals (Sweden)

Xiaoyong Yan

Full Text Available We develop an efficient learning strategy of Chinese characters based on the network of the hierarchical structural relations between Chinese characters. A more efficient strategy is that of learning the same number of useful Chinese characters in less effort or time. We construct a node-weighted network of Chinese characters, where character usage frequencies are used as node weights. Using this hierarchical node-weighted network, we propose a new learning method, the distributed node weight (DNW strategy, which is based on a new measure of nodes' importance that considers both the weight of the nodes and its location in the network hierarchical structure. Chinese character learning strategies, particularly their learning order, are analyzed as dynamical processes over the network. We compare the efficiency of three theoretical learning methods and two commonly used methods from mainstream Chinese textbooks, one for Chinese elementary school students and the other for students learning Chinese as a second language. We find that the DNW method significantly outperforms the others, implying that the efficiency of current learning methods of major textbooks can be greatly improved.

Characterization of Nano Sized Microstructures in Fe and Ni Base ODS Alloys Using Small Angle Neutron Scattering

International Nuclear Information System (INIS)

Han, Young-Soo; Jang, Jin-Sung; Mao, Xiaodong

2015-01-01

Ferritic ODS(Oxide-dispersion-strengthened) alloy is known as a primary candidate material of the cladding tubes of a sodium fast reactor (SFR) in the Generation IV research program. In ODS alloy, the major contribution to the enhanced high-temperature mechanical property comes from the existence of nano-sized oxide precipitates, which act as obstacles to the movement of dislocations. In addition for the extremely high temperature application(>950 .deg. C) of future nuclear system, Ni base ODS alloys are considered as candidate materials. Therefore the characterization of nano-sized microstructures is important for determining the mechanical properties of the material. Small angle neutron scattering (SANS) technique non-destructively probes structures in materials at the nano-meter length of scale (1 - 1000 nm) and has been a very powerful tool in a variety of scientific/engineering research areas. In this study, nano-sized microstructures were quantitatively analyzed by small angle neutron scattering. Quantitative microstructural information on nanosized oxide in ODS alloys was obtained from SANS data. The effects of the thermo mechanical treatment on the size and volume fraction of nano-sized oxides were analyzed. For 12Cr ODS alloy, the experimental A-ratio is two-times larger than the theoretical A-ratio., and this result is considered to be due to the imperfections included in YTaO 4 . For Ni base ODS alloy, the volume fraction of the mid-sized particles (- 30 nm) increases rapidly as hot extrusion temperature decreases

Development of resistance welding process. 6. Evaluation test of welding properties of martensitic ODS steel)

International Nuclear Information System (INIS)

Kono, Shusaku; Seki, Masayuki; Ishibashi, Fujio

2003-05-01

The welding condition and the heat-treatment condition were optimized to evaluate welding properties of the martensitic ODS steel cladding tube. The test pieces for evaluation of strength properties of the welded zone were produced by the optimized welding condition. In order to evaluate the strength of the welded zone, the internal creep rapture test, the single axis creep rapture test, the burst test and the tensile test were conducted. Following results were obtained in these tests. (1) Weld ability: An excellent welding characteristic was observed. The micro cracks, etc. were not served at the joint starting point. The joint starting points were connected uniformly with errors less than 0.05 mm. It is considered that an excellent welding characteristic was result of homogeneous micro structure of cladding material. (2) End plug material: In case of the material of end plug was martensitic ODS steel as same as that of cladding tube, the micro structure and the precipitation state carbide near the welded zone were found to be almost same as that of cladding tube. (3) Optimization of heat-treatment condition: The heat treatments of normalizing (1050degC) and tempering (780degC) were performed after welding and the micro structure near the welded zone was the isometric structure with low dislocation density, the precipitation state of carbide was uniform as same as that of cladding tube. These heat treatments can relax the residual stress accumulated when welding; it is considered that these heat treatments after welding are indispensable. (4) Strength of welded zone: The strength of the welded zone was found to be equal to that of cladding tube in all the strength tests. Therefore, it is concluded that the welding technology for the martensitic ODS steel is completed. (author)

Mechanical behaviour of ferritic ODS steels - Temperature dependancy and history

Czech Academy of Sciences Publication Activity Database

Fournier, B.; Steckmeyer, A.; Rouffié, A.-L.; Malaplate, J.; Garnier, J.; Ratti, M.; Wident, P.; Ziolek, L.; Tournie, I.; Rabeau, V.; Gentzbittel, J.M.; Kruml, Tomáš; Kuběna, Ivo

2012-01-01

Roč. 430, 1-3 (2012), s. 142-149 ISSN 0022-3115 Institutional support: RVO:68081723 Keywords : ODS steels * fatigue * fracture mechanics Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 1.211, year: 2012

Logo-od: The applicability of Logotherapy as an organisation development intervention

Directory of Open Access Journals (Sweden)

Daniel H. Burger

2008-11-01

Full Text Available the study investigated the relationship between “resistance to or readiness for change” (ror-change and “meaning seeking”, and whether a logotherapy-based intervention – Logo-OD – would impact on resistance to change. A quasi-experimental design and various statistical procedures were applied to test formulated hypotheses. of a survey population of 1 637 individuals, 193 and 76 respondents formed part of the pre- and post-test samples respectively. Whereas a signifcant relationship was established between said constructs, no signifcant effect of Logo-OD was observed. These results supported the primary conclusions emanating from the literature: the role of logo-oD is one of a positive trigger event for organisational change.

Order-disorder transition in the complex lithium spinel Li2CoTi3O8

International Nuclear Information System (INIS)

Reeves, Nik; Pasero, Denis; West, Anthony R.

2007-01-01

Li 2 CoTi 3 O 8 has an ordered Li 2 BB' 3 O 8 spinel structure, space group P4 3 32, at room temperature with 3:1 ordering of Ti and Li on the octahedral sites, and Li, Co disordered over the tetrahedral site. Rietveld refinement of variable temperature neutron powder diffraction data has shown an order-disorder phase transition in Li 2 CoTi 3 O 8 which commences at ∼500 deg. C with Li and Co mixing on the tetrahedral and 4-fold octahedral sites and is complete at a first order structural discontinuity at ∼915 deg. C. The fraction of Ti on the 12-fold octahedral site exhibits a small decrease with increasing temperature, which may suggest that the disordering involves all three cations. Above 930 deg. C, the structure, space group Fd3-barm, has Li, Co and Ti sharing a single-octahedral site and Li, Co sharing a tetrahedral site, although Co still exhibits a preference for tetrahedral coordination. A labelling scheme for ordered and partially ordered 3:1 spinels is devised which focuses on the occupancy of the Li,B cations. - Graphical abstract: Rietveld refinement of variable temperature neutron powder diffraction data shows an order-disorder phase transition in Li 2 CoTi 3 O 8 commencing at ∼500 deg. C with Li,Co mixing on tetrahedral and octahedral sites. This becomes complete at a first-order structural discontinuity at ∼915 deg. C. Above 930 deg. C, the structure, space group Fd3-barm, has Li, Co and Ti sharing a single-octahedral site and Li, Co sharing a tetrahedral site

Topological approach to separate order from disorder in simulated atomic arrays

International Nuclear Information System (INIS)

Borodin, Vladimir A.

2003-01-01

Computer simulations involving transitions between ordered (crystalline) and disordered phases in solids are common in material science. Usually, it is of interest to know, which atoms in simulated atomic arrays belong to crystalline phase and which are in 'disordered' state (melt, amorphous pockets, individual point defects, etc.). In this paper we discuss a possible strategy to achieve this knowledge, using only information about simulated atomic positions and applying topological processing of the local atomic environments. The steps in practical realization of this strategy are discussed in more detail

Measuring order in disordered systems and disorder in ordered systems: Random matrix theory for isotropic and nematic liquid crystals and its perspective on pseudo-nematic domains

Science.gov (United States)

Zhao, Yan; Stratt, Richard M.

2018-05-01

Surprisingly long-ranged intermolecular correlations begin to appear in isotropic (orientationally disordered) phases of liquid crystal forming molecules when the temperature or density starts to close in on the boundary with the nematic (ordered) phase. Indeed, the presence of slowly relaxing, strongly orientationally correlated, sets of molecules under putatively disordered conditions ("pseudo-nematic domains") has been apparent for some time from light-scattering and optical-Kerr experiments. Still, a fully microscopic characterization of these domains has been lacking. We illustrate in this paper how pseudo-nematic domains can be studied in even relatively small computer simulations by looking for order-parameter tensor fluctuations much larger than one would expect from random matrix theory. To develop this idea, we show that random matrix theory offers an exact description of how the probability distribution for liquid-crystal order parameter tensors converges to its macroscopic-system limit. We then illustrate how domain properties can be inferred from finite-size-induced deviations from these random matrix predictions. A straightforward generalization of time-independent random matrix theory also allows us to prove that the analogous random matrix predictions for the time dependence of the order-parameter tensor are similarly exact in the macroscopic limit, and that relaxation behavior of the domains can be seen in the breakdown of the finite-size scaling required by that random-matrix theory.

Temperament and character as endophenotype in adults with autism spectrum disorders or attention deficit/hyperactivity disorder

NARCIS (Netherlands)

Sizoo, Bram B.; van der Gaag, Rutger Jan; van den Brink, Wim

2015-01-01

Autism spectrum disorder and attention deficit/hyperactivity disorder overlap in several ways, raising questions about the nature of this comorbidity. Rommelse et al. published an innovative review of candidate endophenotypes for autism spectrum disorder and attention deficit/hyperactivity disorder

Casting technology for ODS steels - the internal oxidation approach

Science.gov (United States)

Miran, S.; Franke, P.; Möslang, A.; Seifert, H. J.

2017-07-01

The formation of stainless ODS steel by internal oxidation of as-cast steel has been investigated. An alloy (Fe-16Cr-0.2Al-0.05Y, wt.%) was embedded in a (VO/V2O3) powder mixture serving as an oxygen activity buffer and heat treated at 1450 °C for 20 h. After this procedure no oxide scale was present on the surface of the sample but a zone of internal oxidation with a depth of about 2000 μm was formed in its interior. The precipitates within this zone consisted of two types of oxides. Discrete aluminium oxide particles with a size of a few micrometres were formed in outer regions of the specimen. Finer aluminium-yttrium oxides with a size of some hundred nanometres were mainly precipitated in inner regions of the sample. The results can be considered as a promising step towards an alternative production route for ODS steels.

Microstructure and mechanical behavior of ODS and non-ODS Fe–14Cr model alloys produced by spark plasma sintering

International Nuclear Information System (INIS)

Auger, M.A.; Castro, V. de; Leguey, T.; Muñoz, A.; Pareja, R.

2013-01-01

In this work the spark plasma sintering (SPS) technique has been explored as an alternative consolidation route for producing ultra-fine grained Fe–14Cr model alloys containing a dispersion of oxide nanoparticles. Elemental powders of Fe and Cr, and nanosized Y 2 O 3 powder have been mechanically alloyed in a planetary ball mill and rapidly sintered in a spark plasma furnace. Two alloys, with nominal compositions Fe–14%Cr and Fe–14%Cr–0.3%Y 2 O 3 (wt.%), have been fabricated and their microstructure and mechanical properties investigated. The results have been compared with those obtained for other powder metallurgy processed alloys of the same composition but consolidated by hot isostatic pressing. The SPS technique under the present conditions has produced Fe–14Cr materials that apparently exhibit different microstructures yielding inferior mechanical properties than the counterpart material consolidated by hot isostatic pressing. Although the presence of a dispersion of Y-rich particles is evident, the oxide dispersion strengthened (ODS) Fe–14Cr alloy consolidated by SPS exhibits poor tensile properties. The extensive decoration of the powder particle surfaces with Cr-rich precipitates and the residual porosity appear to be responsible for the impaired properties of this ODS alloy consolidated by SPS

Microstructure and mechanical behavior of ODS and non-ODS Fe–14Cr model alloys produced by spark plasma sintering

Energy Technology Data Exchange (ETDEWEB)

Auger, M.A.; Castro, V. de [Departamento de Física, Universidad Carlos III de Madrid, 28911 Leganés (Spain); Leguey, T., E-mail: leguey@fis.uc3m.es [Departamento de Física, Universidad Carlos III de Madrid, 28911 Leganés (Spain); Muñoz, A.; Pareja, R. [Departamento de Física, Universidad Carlos III de Madrid, 28911 Leganés (Spain)

2013-05-15

In this work the spark plasma sintering (SPS) technique has been explored as an alternative consolidation route for producing ultra-fine grained Fe–14Cr model alloys containing a dispersion of oxide nanoparticles. Elemental powders of Fe and Cr, and nanosized Y{sub 2}O{sub 3} powder have been mechanically alloyed in a planetary ball mill and rapidly sintered in a spark plasma furnace. Two alloys, with nominal compositions Fe–14%Cr and Fe–14%Cr–0.3%Y{sub 2}O{sub 3} (wt.%), have been fabricated and their microstructure and mechanical properties investigated. The results have been compared with those obtained for other powder metallurgy processed alloys of the same composition but consolidated by hot isostatic pressing. The SPS technique under the present conditions has produced Fe–14Cr materials that apparently exhibit different microstructures yielding inferior mechanical properties than the counterpart material consolidated by hot isostatic pressing. Although the presence of a dispersion of Y-rich particles is evident, the oxide dispersion strengthened (ODS) Fe–14Cr alloy consolidated by SPS exhibits poor tensile properties. The extensive decoration of the powder particle surfaces with Cr-rich precipitates and the residual porosity appear to be responsible for the impaired properties of this ODS alloy consolidated by SPS.

IE Information Notice No. 85-64: BBC Brown Boveri low-voltage K-line circuit breakers, with deficient overcurrent trip devices models OD-4 and 5

International Nuclear Information System (INIS)

Jordan, E.L.

1992-01-01

On May 13, 1985, BBC Brown Boveri Inc. (BBC) made a 10 CFR Part 21 report to the NRC concerning a deficiency in the Models OD-4 and OD-5 overcurrent trip devices installed on K-line circuit breakers. The affected breakers were manufactured by BBC from October 1983 to March 1985 and may have incorrect short time delay band levers (links) installed in electromechanical overcurrent trip device models OD-4 and OD-5. The incorrect link could limit the travel of the short time armature and cause the short time element to be inoperative in the maximum (MAX) band. The May 13, 1985, report recommended that all K-line circuit breakers with the OD-4 and OD-5 overcurrent trip devices and any spare OD-4 and OD-5 overcurrent trip devices that were manufactured between October 1983 and March 1985, be inspected for an incorrect short time delay band link. Licensees known by BBC to have purchased K-line breakers or spare OD-4 or OD-5 overcurrent trip devices were notified of the possible defect and instructions provided for their inspection. Enclosed is a list of utilities and related facilities that were notified by BBC. However, BBC advised the NRC that there is a possibility that other utilities could be using K-line circuit breakers with the suspect OD-4 and OD-5 overcurrent trip devices. Therefore, all licensees are being notified of this possible defect

Conduction mechanism studies on electron transfer of disordered system

Institute of Scientific and Technical Information of China (English)

徐慧; 宋祎璞; 李新梅

2002-01-01

Using the negative eigenvalue theory and the infinite order perturbation theory, a new method was developed to solve the eigenvectors of disordered systems. The result shows that eigenvectors change from the extended state to the localized state with the increase of the site points and the disordered degree of the system. When electric field is exerted, the electrons transfer from one localized state to another one. The conductivity is induced by the electron transfer. The authors derive the formula of electron conductivity and find the electron hops between localized states whose energies are close to each other, whereas localized positions differ from each other greatly. At low temperature the disordered system has the character of the negative differential dependence of resistivity and temperature.

Interactive Character as a Virtual Tour Guide to an Online Museum Exhibition.

Science.gov (United States)

de Almeida, Pilar; Yokoi, Shigeki

Online museums could benefit from digital "lifelike" characters in order to guide users to virtual tours and to customize the tour information to users' interests. Digital characters have been explored in online museum web sites with different degrees of interaction and modes of communication. Such research, however, does not explore…

Dilatometry of nonstoichiometric titanium carbide in the range of order-disorder phase transformation

International Nuclear Information System (INIS)

Karpov, A.V.; Kobyakov, V.P.; Chernomorskaya, E.A.

1995-01-01

Method of dilatometry was used for investigation of TiC x (0.49 x in ordered and disordered states, as well as on transformation heat were obtained. Increase of bond strength in result of carbon atom ordering in carbon sublattice was noted. 14 refs., 6 figs

Temperament and Character as Endophenotype in Adults with Autism Spectrum Disorders or Attention Deficit/Hyperactivity Disorder

Science.gov (United States)

Sizoo, Bram B.; van der Gaag, Rutger Jan; van den Brink, Wim

2015-01-01

Autism spectrum disorder and attention deficit/hyperactivity disorder overlap in several ways, raising questions about the nature of this comorbidity. Rommelse et al. published an innovative review of candidate endophenotypes for autism spectrum disorder and attention deficit/hyperactivity disorder in cognitive and brain domains. They found that…

On Eddy current examination (ECE) of Incoloy 800 SG tube using OD encircling and ID bobbin coil

International Nuclear Information System (INIS)

Kapoor, K.; Sunder Krishna, K.; Bakshu, S.A.

2015-01-01

The purpose of this paper is to present and compare the results of ECE carried out on steam generator tubes from OD side and ID side. During the manufacturing of the tubes Eddy current testing is being carried out using OD encircling probe as per ASTM E 571. Here the purpose of the test is to capture the manufacturing defects. The parameters of the test are optimized to achieve best sensitivity to this requirement. These tubes are then installed in the steam generator and once again ECE is carried out during installation (pre-service inspection-PSI) and during in-service inspection (ISI) by using ID bobbin coil. These tests are carried out as per ASME section V article 8 appendix 1. Here the purpose of the test is to detect wall thinning, dent, pits etc due to operation and to locate these defects (OD side or ID side). Here the operating parameters are optimized for phase separation of defects from OD and ID. These parameters are quite different from those used during the manufacturing ECE. Interpretation of the signals detected in PSI/ISI in must be done with care to correlate with defect indications detected during manufacturing. In the present study, tubes with certain manufacturing defects, detected with OD encircling test were subjected to ID bobbin coil examination. Also certain tubes with signal picked up during test from ID were examined by using the OD encircling probe. This comparison of the results provides a clear picture about the sensitivity and deficiency of the either type of test. (author)

An order-by-disorder process in the cyclic phase of spin-2 condensate with a weak magnetic field

International Nuclear Information System (INIS)

Zheng, Gong-Ping; Xu, Lei-Kuan; Qin, Shuai-Feng; Jian, Wen-Tian; Liang, J.-Q.

2013-01-01

We present in this paper a model study on the “order-by-disorder” process in the cyclic phase of spin-2 condensate, which forms a family of incommensurable, spiral degenerate ground states. On the basis of the ordering mechanism of entropic splitting, it is demonstrated that the energy corrections resulting from quantum fluctuations of disorder lift the accidental degeneracy of the cyclic configurations and thus lead to an eventual spiral order called the cyclic order. The order-by-disorder phenomenon is then realized even if the magnetic field exists. Finally, we show that our theoretic observations can be verified experimentally by direct detection of the cyclic order in the 87 Rb condensate of a spin-2 manifold with a weak magnetic field. -- Highlights: •A model for the order-by-disorder process in the cyclic phase of spin-2 condensate is presented. •The second-order quantum fluctuations of the mean-field states are studied. •The energy corrections lift the accidental degeneracy of the cyclic configurations. •The order-by-disorder phenomenon is realized even if a magnetic field exists. •The theoretic observations can be verified experimentally for 87 Rb condensate

Effects of Mn addition on microstructures and mechanical properties of 10Cr ODS ferritic/martensitic steels

International Nuclear Information System (INIS)

Jin, Hyun Ju; Kim, Tae Kyu

2014-01-01

Ferritic/martensitic (FM) steels are very attractive for the structural materials of fast fission reactors such as a sodium cooled fast reactor (SFR) owing to their excellent irradiation resistance to a void swelling, but are known to reveal an abrupt loss of their creep and tensile strengths at temperatures above 600 .deg. C. Accordingly, high temperature strength should be considerably improved for an application of the FM steel to the structural materials of SFR. Oxide dispersion strengthened (ODS) FM steels are considered to be promising candidate materials for high- temperature components operating in severe environments such as nuclear fusion and fission systems due to their excellent high temperature strength and radiation resistance stemming from the addition of extremely thermally stable oxide particles dispersed in the ferritic/martensitic matrix.. To develop an advanced ODS steel for core structural materials for next generation nuclear reactor system applications, it is important to optimize its compositions to improve the high temperature strength and radiation resistance. This study investigates effects of Mn addition on microstructures and mechanical properties of 10Cr ODS FM steel. For this, two 10 Cr ODS FM steels were prepared by mechanical alloying (MA), hot isostatic pressing (HIP), and hot rolling process. Tensile tests were carried out at room temperature and 700 .deg. C to evaluate the influences of the Mn element on the mechanical properties. The microstructures were observed using SEM, electron back-scatter diffraction (EBSD) and transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS). In the present study, the effects of Mn addition on the microstructure and mechanical properties of ODS FM steels were investigated. The ODS FM steels were manufactured by the MA, HIP and hot-rolling processes

Martensitic transformation in Eurofer-97 and ODS-Eurofer steels: A comparative study

International Nuclear Information System (INIS)

Zilnyk, K.D.; Oliveira, V.B.; Sandim, H.R.Z.; Möslang, A.; Raabe, D.

2015-01-01

Highlights: • Martensitic transformation of RAFM steels promotes significant grain fragmentation. • Austenite grain growth occurs in Eurofer-97 steel but not in ODS-Eurofer steel. • Boundary misorientation distribution of the as-quenched steels show two maxima peaks. • The amount of retained austenite varies from one steel to another. - Abstract: Reduced-activation ferritic–martensitic Eurofer-97 and ODS-Eurofer steels are potential candidates for structural applications in advanced nuclear reactors. Samples of both steel grades in the as-tempered condition were austenitized in vacuum for 1 h from 900 °C to 1300 °C followed by air cooling to room temperature. The microstructure was characterized by dilatometry, electron backscatter diffraction (EBSD), and X-ray diffraction (XRD). Thermodynamic calculations provided by Thermo-Calc software were used to determine their transformation temperatures. Even having similar chemical composition, important changes were observed after martensitic transformation in these steels. Significant austenitic grain growth was observed in Eurofer-97 steel leading to the development of coarser martensitic packets. Contrastingly, austenitic grain growth was prevented in ODS-Eurofer steel due to fine and stable dispersion of Y-based particles

STS-79 Ku-band antenna, ODS and Spacehab module at PCR

Science.gov (United States)

1996-01-01

The orbiter Ku-band antenna looms large in this view of the Space Shuttle Atlantis' payload bay. Visible just past the antenna system -- stowed on the starboard side of the payload bay wall -- is the Orbiter Docking System (ODS), and connected to the ODS via a tunnel is the Spacehab Double Module in the aft area of the payload bay. This photograph was taken from the starboard wing platform on the fifth level of the Payload Changeout Room (PCR) at Launch Pad 39A. Work is under way in the PCR to close Atlantis' payload bay doors for flight. Atlantis currently is being targeted for liftoff on Mission STS-79, the fourth docking of the U.S. Shuttle to the Russian Space Station Mir, around September 12.

Consideration of the oxide particle-dislocation interaction in 9Cr-ODS steel

Science.gov (United States)

Ijiri, Yuta; Oono, N.; Ukai, S.; Yu, Hao; Ohtsuka, S.; Abe, Y.; Matsukawa, Y.

2017-05-01

The interaction between oxide particles and dislocations in a 9Cr-ODS ferritic steel is investigated by both static and in situ TEM observation under dynamic straining conditions and room temperature. The measured obstacle strength (?) of the oxide particles was no greater than 0.80 and the average was 0.63. The dislocation loops around some coarsened particles were also observed. The calculated obstacle strength by a stress formula of the Orowan interaction is nearly equaled to the average experimental value. Not only cross-slip system but also the Orowan interaction should be considered as the main interaction mechanism between oxide particles and dislocation in 9CrODS ferritic steel.

The Welenrengnge Boat Model: Maritim Character Building Of Higher Education In Indonesia

Directory of Open Access Journals (Sweden)

AB Takko Bandung

2016-12-01

Full Text Available This study is a cultural research using a descriptive qualitative design, namely Maritim character values in the script of Sawerigading Voyage to China is profoundly classified, interpreted, and described. The research result shows that Welenrengnge can be utilized in order to implement the Maritim character for Hasanuddin University academicians and it has been tested to students at Faculty of Humanities, Hasanuddin University. Based on the scenario, the stages to achieve the Maritim character, what is always heard, seen, read, reviewed, discussed and performed is obsessed into everybody’s personality so the self-character can be changed and shaped either individually or collectively. Therefore, this model is called the Welenrengnge Boat Model. Seizing the Maritim character requires a considerable time. The experimental research shows that the students generation of 2014 of Indonesian Literature Department of Faculty of Humanities have commenced to build the Maritim character.

Material Flow and Oxide Particle Distributions in Friction-Stir Welded F/M-ODS Sheets

Energy Technology Data Exchange (ETDEWEB)

Kang, Suk Hoon; Noh, Sanghoon; Jin, Hyun Ju; Kim, Tae Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-05-15

It is well known that uniform nano-oxide dispersoids act as pinning points to obstruct dislocation and grain boundary motion in ODS(Oxide dispersion strengthened) steel. However, these advantages will disappear while the material is subjected to the high temperature of conventional fusion welding. There is only limited literature available on the joining of ODS steels. Friction stir welding (FSW) is considered to be the best welding technique for welding ODS steels as the technique helps in retaining the homogeneous nano-oxide particles distributions in matrix. FSW is a solid.state, hot.shear joining process in which a rotating tool with a shoulder and terminating in a threaded pin, moves along the butting surfaces of two rigidly clamped plates placed on a backing plate. Heat generated by friction at the shoulder and to a lesser extent at the pin surface, softens the material being welded. Severe plastic deformation and flow of this plasticised metal occurs as the tool is translated along the welding direction. Material is transported from the front of the tool to the trailing edge where it is forged into a joint. Friction stir welding appears to be a very promising technique for the welding of FMS and ODS steels. This study found that, during FSW, the forward movement of the tool pin results in loose contact between the tool pin and the receding material on the advancing side.

Microscopy of Alloy Formation on Arc Plasma Sintered Oxide Dispersion Strengthen (ODS) Steel

Science.gov (United States)

Bandriyana, B.; Sujatno, A.; Salam, R.; Dimyati, A.; Untoro, P.

2017-07-01

The oxide dispersed strengthened (ODS) alloys steel developed as structure material for nuclear power plants (NPP) has good resistant against creep due to their unique microstructure. Microscopy investigation on the microstructure formation during alloying process especially at the early stages was carried out to study the correlation between structure and property of ODS alloys. This was possible thanks to the arc plasma sintering (APS) device which can simulate the time dependent alloying processes. The ODS sample with composition of 88 wt.% Fe and 12 wt.% Cr powder dispersed with 1 wt.% ZrO2 nano powder was mixed in a high energy milling, isostatic compressed to form sample coins and then alloyed in APS. The Scanning Electron Microscope (SEM) with X-ray Diffraction Spectroscopy (EDX) line scan and mapping was used to characterize the microstructure and elemental composition distribution of the samples. The alloying process with unification of each Fe and Cr phase continued by the alloying formation of Fe-Cr by inter-diffusion of both Fe and Cr and followed by the improvement of the mechanical properties of hardness.

The influence of Cr content on the mechanical properties of ODS ferritic steels

Science.gov (United States)

Li, Shaofu; Zhou, Zhangjian; Jang, Jinsung; Wang, Man; Hu, Helong; Sun, Hongying; Zou, Lei; Zhang, Guangming; Zhang, Liwei

2014-12-01

The present investigation aimed at researching the mechanical properties of the oxide dispersion strengthened (ODS) ferritic steels with different Cr content, which were fabricated through a consolidation of mechanical alloyed (MA) powders of 0.35 wt.% nano Y2O3 dispersed Fe-12.0Cr-0.5Ti-1.0W (alloy A), Fe-16.0Cr-0.5Ti-1.0W (alloy B), and Fe-18.0Cr-0.5Ti-1.0W (alloy C) alloys (all in wt.%) by hot isostatic pressing (HIP) with 100 MPa pressure at 1150 °C for 3 h. The mechanical properties, including the tensile strength, hardness, and impact fracture toughness were tested by universal testers, while Young's modulus was determined by ultrasonic wave non-destructive tester. It was found that the relationship between Cr content and the strength of ODS ferritic steels was not a proportional relationship. However, too high a Cr content will cause the precipitation of Cr-enriched segregation phase, which is detrimental to the ductility of ODS ferritic steels.

Microstructure of HIPed and SPSed 9Cr-ODS steel and its effect on helium bubble formation

International Nuclear Information System (INIS)

Lu, Chenyang; Lu, Zheng; Xie, Rui; Liu, Chunming; Wang, Lumin

2016-01-01

Two 9Cr-ODS steels with the same nominal composition were consolidated by hot isostatic pressing (HIP, named COS-1) and spark plasma sintering (SPS, named COS-2). Helium ions were implanted into COS-1, COS-2 and non-ODS Eurofer 97 steels up at 673 K. Microstructures before and after helium ion implantations were carefully characterized. The results show a bimodal grain size distribution in COS-2 and a more uniform grain size distribution in COS-1. Nanoscale clusters of GP-zone type Y–Ti–O and Y_2Ti_2O_7 pyrochlore as well as large spinel Mn(Ti)Cr_2O_4 particles are all observed in the two ODS steels. The Y–Ti-enriched nano-oxides in COS-1 exhibit higher number density and smaller size than in COS-2. The Y–Ti-enriched nano-oxides in fine grains of COS-2 show higher number density and smaller size than that in coarse grains of COS-2. Nano-oxides effectively trap helium atoms and lead to the formation of high density and ultra-fine helium bubbles. - Highlights: • The microstructure changes of two ODS steels before and after helium ion implantation have been elucidated. • The mechanism of the microstructures of ODS steels under varied thermal mechanical processing paths have been explored. • The dependence of the size, density and distribution of helium bubbles on the specific microstructure features are explored.

Microstructure of HIPed and SPSed 9Cr-ODS steel and its effect on helium bubble formation

Energy Technology Data Exchange (ETDEWEB)

Lu, Chenyang [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Material Science and Engineering, Northeastern University, Shenyang 110819, Liaoning (China); Department of Nuclear Engineering and Radiological Science, University of Michigan, Ann Arbor, MI, 48109 (United States); Lu, Zheng, E-mail: luz@atm.neu.edu.cn [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Material Science and Engineering, Northeastern University, Shenyang 110819, Liaoning (China); Xie, Rui; Liu, Chunming [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Material Science and Engineering, Northeastern University, Shenyang 110819, Liaoning (China); Wang, Lumin, E-mail: lmwang@umich.edu [Department of Nuclear Engineering and Radiological Science, University of Michigan, Ann Arbor, MI, 48109 (United States)

2016-06-15

Two 9Cr-ODS steels with the same nominal composition were consolidated by hot isostatic pressing (HIP, named COS-1) and spark plasma sintering (SPS, named COS-2). Helium ions were implanted into COS-1, COS-2 and non-ODS Eurofer 97 steels up at 673 K. Microstructures before and after helium ion implantations were carefully characterized. The results show a bimodal grain size distribution in COS-2 and a more uniform grain size distribution in COS-1. Nanoscale clusters of GP-zone type Y–Ti–O and Y{sub 2}Ti{sub 2}O{sub 7} pyrochlore as well as large spinel Mn(Ti)Cr{sub 2}O{sub 4} particles are all observed in the two ODS steels. The Y–Ti-enriched nano-oxides in COS-1 exhibit higher number density and smaller size than in COS-2. The Y–Ti-enriched nano-oxides in fine grains of COS-2 show higher number density and smaller size than that in coarse grains of COS-2. Nano-oxides effectively trap helium atoms and lead to the formation of high density and ultra-fine helium bubbles. - Highlights: • The microstructure changes of two ODS steels before and after helium ion implantation have been elucidated. • The mechanism of the microstructures of ODS steels under varied thermal mechanical processing paths have been explored. • The dependence of the size, density and distribution of helium bubbles on the specific microstructure features are explored.

[Creativity and Character Traits of University Students: Transversal Association Study].

Science.gov (United States)

Santamaría, Hernando; Sánchez, Ricardo

2012-06-01

This study was carried out to assess the relationship between character traits and creativity in a sample of students from a public university in Bogotá. A random sample of 157 students from the Universidad Nacional de Colombia. The two instruments used for measuring character traits and creativity were the International Personality Disorder Examination (IPDE) and the Abbreviated Torrance Test for Adults (ATTA). Additional information about gender, psychopathological antecedents, current academic period and academic average have been recorded. Robust regression methods have been used to analyze the relationship between creativity and character traits. Creativity and narcissistic traits were associated. In a multivariate model, other variables showing a relationship with creativity were found, i.e., male gender, mental illness family antecedents, number of academic periods completed, and a high academic average. Relationship between creativity and narcissistic traits had not been reported in previous. Longitudinal studies using more accurate scales should be undertaken to determine the validity of these findings. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Ascorbic acid deficiency aggravates stress-induced gastric mucosal lesions in genetically scorbutic ODS rats.

Science.gov (United States)

Ohta, Y; Chiba, S; Imai, Y; Kamiya, Y; Arisawa, T; Kitagawa, A

2006-12-01

We examined whether ascorbic acid (AA) deficiency aggravates water immersion restraint stress (WIRS)-induced gastric mucosal lesions in genetically scorbutic ODS rats. ODS rats received scorbutic diet with either distilled water containing AA (1 g/l) or distilled water for 2 weeks. AA-deficient rats had 12% of gastric mucosal AA content in AA-sufficient rats. AA-deficient rats showed more severe gastric mucosal lesions than AA-sufficient rats at 1, 3 or 6 h after the onset of WIRS, although AA-deficient rats had a slight decrease in gastric mucosal AA content, while AA-sufficient rats had a large decrease in that content. AA-deficient rats had more decreased gastric mucosal nonprotein SH and vitamin E contents and increased gastric mucosal lipid peroxide content than AA-sufficient rats at 1, 3 or 6 h of WIRS. These results indicate that AA deficiency aggravates WIRS-induced gastric mucosal lesions in ODS rats by enhancing oxidative damage in the gastric mucosa.

A complex interaction of imprinted and maternal-effect genes modifies sex determination in Odd Sex (Ods) mice.

Science.gov (United States)

Poirier, Christophe; Qin, Yangjun; Adams, Carolyn P; Anaya, Yanett; Singer, Jonathan B; Hill, Annie E; Lander, Eric S; Nadeau, Joseph H; Bishop, Colin E

2004-11-01

The transgenic insertional mouse mutation Odd Sex (Ods) represents a model for the long-range regulation of Sox9. The mutation causes complete female-to-male sex reversal by inducing a male-specific expression pattern of Sox9 in XX Ods/+ embryonic gonads. We previously described an A/J strain-specific suppressor of Ods termed Odsm1(A). Here we show that phenotypic sex depends on a complex interaction between the suppressor and the transgene. Suppression can be achieved only if the transgene is transmitted paternally. In addition, the suppressor itself exhibits a maternal effect, suggesting that it may act on chromatin in the early embryo.

The Bgo-Od Experiment at Elsa

Science.gov (United States)

Bantes, B.; Bayadilov, D.; Beck, R.; Becker, M.; Bella, A.; Bieling, J.; Böse, S.; Braglieri, A.; Brinkmann, K.; Burdeynyi, D.; Curciarello, F.; de Leo, V.; di Salvo, R.; Dutz, H.; Elsner, D.; Fantini, A.; Frese, T.; Friedrick, S.; Frommberger, F.; Ganenko, V.; Gervino, G.; Ghio, F.; Giardina, G.; Girolami, B.; Glazier, D.; Goertz, S.; Gridnev, A.; Gutz, E.; Hammann, D.; Hannappel, J.; Hillert, W.; Ignatov, A.; Jahn, O.; Jahn, R.; Joosten, R.; Jude, T. C.; Klein, F.; Koop, K.; Krusche, B.; Lapik, A.; Levi Sandri, P.; Lopatin, I.; Mandaglio, G.; Messi, F.; Messi, R.; Metag, V.; Moricciani, D.; Nanova, M.; Nedorezov, V.; Noviskiy, D.; Pedroni, P.; Romaniuk, M.; Rostomyan, T.; Schaerf, C.; Schmieden, H.; Sumachev, V.; Tarakonov, V.; Vegna, V.; Vlasov, P.; Walther, D.; Watts, D.; Zaunick, H.-G.; Zimmermann, T.

2014-01-01

Meson photoproduction is a key tool for the experimental investigation of the nucleon excitation spectrum. To disentangle the specific couplings of resonances, in addition to the rather well measured pion and eta photoproduction channels it is mandatory to obtain information on channels involving strange and vector mesons and higher mass pseudoscalar mesons, and the associated multi-particle final states with both charged and neutral particles. In this respect, the new BGO-OD experiment at the ELSA accelerator of the University of Bonn's Physikalisches Institut provides unique instrumentation. We describe the experiment, present its status and the initial program of measurements.

Mechanosynthesis of A Ferritic ODS (Oxide Dispersion Strengthened) Steel Containing 14% Chromium and Its Characterization

Science.gov (United States)

Rivai, A. K.; Dimyati, A.; Adi, W. A.

2017-05-01

One of the advanced materials for application at high temperatures which is aggressively developed in the world is ODS (Oxide Dispersion strengthened) steel. ODS ferritic steels are one of the candidate materials for future nuclear reactors in the world (Generation IV reactors) because it is able to be used in the reactor above 600 °C. ODS ferritic steels have also been developed for the interconnect material of SOFC (Solid Oxide Fuel Cell) which will be exposed to about 800 °C of temperature. The steel is strengthened by dispersing homogeneously of oxide particles (ceramic) in nano-meter sized in the matrix of the steel. Synthesis of a ferritic ODS steel by dispersion of nano-particles of yttrium oxide (yttria: Y2O3) as the dispersion particles, and containing high-chromium i.e. 14% has been conducted. Synthesis of the ODS steels was done mechanically (mechanosynthesis) using HEM (High Energy ball Milling) technique for 40 and 100 hours. The resulted samples were characterized using SEM-EDS (Scanning Electron Microscope-Energy Dispersive Spectroscope), and XRD (X-ray diffraction) to analyze the microstructure characteristics. The results showed that the crystal grains of the sample with 100 hours milling time was much smaller than the sample with 40 hours milling time, and some amount of alloy was formed during the milling process even for 40 hours milling time. Furthermore, the structure analysis revealed that some amount of iron atom substituted by a slight amount of chromium atom as a solid solution. The quantitative analysis showed that the phase mostly consisted of FeCr solid-solution with the structure was BCC (body-centered cubic).

Effects of Disorder on the Pressure-Induced Mott Transition in κ-(BEDT-TTF2Cu[N(CN2]Cl

Directory of Open Access Journals (Sweden)

Elena Gati

2018-01-01

Full Text Available We present a study of the influence of disorder on the Mott metal-insulator transition for the organic charge-transfer salt κ -(BEDT-TTF 2 Cu[N(CN 2 ]Cl. To this end, disorder was introduced into the system in a controlled way by exposing the single crystals to X-ray irradiation. The crystals were then fine-tuned across the Mott transition by the application of continuously controllable He-gas pressure at low temperatures. Measurements of the thermal expansion and resistance show that the first-order character of the Mott transition prevails for low irradiation doses achieved by irradiation times up to 100 h. For these crystals with a moderate degree of disorder, we find a first-order transition line which ends in a second-order critical endpoint, akin to the pristine crystals. Compared to the latter, however, we observe a significant reduction of both, the critical pressure p c and the critical temperature T c . This result is consistent with the theoretically-predicted formation of a soft Coulomb gap in the presence of strong correlations and small disorder. Furthermore, we demonstrate, similar to the observation for the pristine sample, that the Mott transition after 50 h of irradiation is accompanied by sizable lattice effects, the critical behavior of which can be well described by mean-field theory. Our results demonstrate that the character of the Mott transition remains essentially unchanged at a low disorder level. However, after an irradiation time of 150 h, no clear signatures of a discontinuous metal-insulator transition could be revealed anymore. These results suggest that, above a certain disorder level, the metal-insulator transition becomes a smeared first-order transition with some residual hysteresis.

Actualism and Fictional Characters

Directory of Open Access Journals (Sweden)

André Leclerc

2016-04-01

Full Text Available http://dx.doi.org/10.5007/1808-1711.2016v20n1p61 In what follows, I present only part of a program that consists in developing a version of actualism as an adequate framework for the metaphysics of intentionality. I will try to accommodate in that framework suggestions found in Kripke’s works and some positions developed by Amie Thomasson. What should we change if we accept “fictional entities” in the domain of the actual world? Actualism is the thesis that everything that exists belongs to the domain of the actual world and that there are no possibilia. I shall defend that there are abstract artefacts, like fictional characters, and institutions. My argument could be seen as a version of Moore’s paradox: it is paradoxical to say: “I made (created it, but I do not believe it exists”. Moreover, there are true sentences about them. I will examine what it means to include abstract artefacts in the domain of the actual world. I favour a use of “exist” that includes beings with no concrete occupation of tri-dimensional space; to exist, it is enough to have been introduced at some moment in history. Abstract artefacts, like fictional characters, exist in that sense. I argue that it is important to distinguish two perspectives (internal and external in order to clarify the kind of knowledge we have of fictional characters. However, their existence presupposes a relation of dependence to a material basis and the mental activities of many people.

Disorder-Induced Order in Two-Component Bose-Einstein Condensates

International Nuclear Information System (INIS)

Niederberger, A.; Schulte, T.; Wehr, J.; Lewenstein, M.; Sanchez-Palencia, L.; Sacha, K.

2008-01-01

We propose and analyze a general mechanism of disorder-induced order in two-component Bose-Einstein condensates, analogous to corresponding effects established for XY spin models. We show that a random Raman coupling induces a relative phase of π/2 between the two BECs and that the effect is robust. We demonstrate it in one, two, and three dimensions at T=0 and present evidence that it persists at small T>0. Applications to phase control in ultracold spinor condensates are discussed

Linear discriminant analysis of character sequences using occurrences of words

KAUST Repository

Dutta, Subhajit; Chaudhuri, Probal; Ghosh, Anil

2014-01-01

Classification of character sequences, where the characters come from a finite set, arises in disciplines such as molecular biology and computer science. For discriminant analysis of such character sequences, the Bayes classifier based on Markov models turns out to have class boundaries defined by linear functions of occurrences of words in the sequences. It is shown that for such classifiers based on Markov models with unknown orders, if the orders are estimated from the data using cross-validation, the resulting classifier has Bayes risk consistency under suitable conditions. Even when Markov models are not valid for the data, we develop methods for constructing classifiers based on linear functions of occurrences of words, where the word length is chosen by cross-validation. Such linear classifiers are constructed using ideas of support vector machines, regression depth, and distance weighted discrimination. We show that classifiers with linear class boundaries have certain optimal properties in terms of their asymptotic misclassification probabilities. The performance of these classifiers is demonstrated in various simulated and benchmark data sets.

Phylogenetic Applications of the Minimum Contradiction Approach on Continuous Characters

Directory of Open Access Journals (Sweden)

Marc Thuillard

2009-01-01

Full Text Available We describe the conditions under which a set of continuous variables or characters can be described as an X-tree or a split network. A distance matrix corresponds exactly to a split network or a valued X-tree if, after ordering of the taxa, the variables values can be embedded into a function with at most a local maximum and a local minimum, and crossing any horizontal line at most twice. In real applications, the order of the taxa best satisfying the above conditions can be obtained using the Minimum Contradiction method. This approach is applied to 2 sets of continuous characters. The first set corresponds to craniofacial landmarks in Hominids. The contradiction matrix is used to identify possible tree structures and some alternatives when they exist. We explain how to discover the main structuring characters in a tree. The second set consists of a sample of 100 galaxies. In that second example one shows how to discretize the continuous variables describing physical properties of the galaxies without disrupting the underlying tree structure.

Linear discriminant analysis of character sequences using occurrences of words

KAUST Repository

Dutta, Subhajit

2014-02-01

Classification of character sequences, where the characters come from a finite set, arises in disciplines such as molecular biology and computer science. For discriminant analysis of such character sequences, the Bayes classifier based on Markov models turns out to have class boundaries defined by linear functions of occurrences of words in the sequences. It is shown that for such classifiers based on Markov models with unknown orders, if the orders are estimated from the data using cross-validation, the resulting classifier has Bayes risk consistency under suitable conditions. Even when Markov models are not valid for the data, we develop methods for constructing classifiers based on linear functions of occurrences of words, where the word length is chosen by cross-validation. Such linear classifiers are constructed using ideas of support vector machines, regression depth, and distance weighted discrimination. We show that classifiers with linear class boundaries have certain optimal properties in terms of their asymptotic misclassification probabilities. The performance of these classifiers is demonstrated in various simulated and benchmark data sets.

Order-disorder transitions govern kinetic cooperativity and allostery of monomeric human glucokinase.

Directory of Open Access Journals (Sweden)

Mioara Larion

Full Text Available Glucokinase (GCK catalyzes the rate-limiting step of glucose catabolism in the pancreas, where it functions as the body's principal glucose sensor. GCK dysfunction leads to several potentially fatal diseases including maturity-onset diabetes of the young type II (MODY-II and persistent hypoglycemic hyperinsulinemia of infancy (PHHI. GCK maintains glucose homeostasis by displaying a sigmoidal kinetic response to increasing blood glucose levels. This positive cooperativity is unique because the enzyme functions exclusively as a monomer and possesses only a single glucose binding site. Despite nearly a half century of research, the mechanistic basis for GCK's homotropic allostery remains unresolved. Here we explain GCK cooperativity in terms of large-scale, glucose-mediated disorder-order transitions using 17 isotopically labeled isoleucine methyl groups and three tryptophan side chains as sensitive nuclear magnetic resonance (NMR probes. We find that the small domain of unliganded GCK is intrinsically disordered and samples a broad conformational ensemble. We also demonstrate that small-molecule diabetes therapeutic agents and hyperinsulinemia-associated GCK mutations share a strikingly similar activation mechanism, characterized by a population shift toward a more narrow, well-ordered ensemble resembling the glucose-bound conformation. Our results support a model in which GCK generates its cooperative kinetic response at low glucose concentrations by using a millisecond disorder-order cycle of the small domain as a "time-delay loop," which is bypassed at high glucose concentrations, providing a unique mechanism to allosterically regulate the activity of human GCK under physiological conditions.

Behaviour of new ODS alloys under single and multiple deformation

Czech Academy of Sciences Publication Activity Database

Mašek, B.; Khalaj, O.; Nový, Z.; Kubina, T.; Jirková, H.; Svoboda, Jiří; Stadler, C.

2016-01-01

Roč. 50, č. 6 (2016), s. 891-898 ISSN 1580-2949 R&D Projects: GA ČR(CZ) GA14-24252S Institutional support: RVO:68081723 Keywords : ODS alloys * composite * steel * Fe-Al Subject RIV: JI - Composite Materials Impact factor: 0.436, year: 2016

Defects and related phenomena in electron irradiated ordered or disordered Fe-Co and Fe-Co-V alloys

International Nuclear Information System (INIS)

Riviere, J.P.; Dinhut, J.F.; Desarmot, G.

1983-01-01

Two B 2 type alloys Fe 50 at.%-Co 50 at.% and Fe 49 at.%-Co 49 at.%-V 2 at.% either in the ordered or the disordered state have been irradiated with 2.5 MeV electrons at liquid hydrogen temperature. The recovery of the resistivity damage was studied during subsequent isochronal annealing up to 700 K. The resistivity damage rates for both initially disordered Fe-Co and Fe-Co-V alloys are interpreted in terms of point defect production. The intrinsic resistivities rhosub(F) of Frenkel pairs and the effective recombination volumes V 0 are determined. In the Fe-Co ordered alloy point defect production superimposed with a disordering process can account for the resistivity damage. The effective displacement rate causing disordering is determined, indicating that replacement collisions are the dominant disordering mechanism. A calculation of the average number of replacements along directions per Frenkel pair is proposed. During the recovery of the radiation induced resistivity three main stages are observed in both ordered and disordered alloys. The particular resistivity behavior of the Fe-Co-V alloy complicates the interpretation of production and recovery data. (author)

Actor/Character Dualism

DEFF Research Database (Denmark)

Riis, Johannes

2012-01-01

Our perception of agency may be inherently fallible, and this may explain not only our general awareness of actors when engaged in fictional characters but also the specific case of paradoxical characters...

Order-disorder-reorder process in thermally treated dolomite samples: a combined powder and single-crystal X-ray diffraction study

Science.gov (United States)

Zucchini, A.; Comodi, P.; Katerinopoulou, A.; Balic-Zunic, T.; McCammon, C.; Frondini, F.

2012-04-01

A combined powder and single-crystal X-ray diffraction analysis of dolomite [CaMg(CO3)2] heated to 1,200°C at 3 GPa was made to study the order-disorder-reorder process. The order/disorder transition is inferred to start below 1,100°C, and complete disorder is attained at approximately 1,200°C. Twinned crystals characterized by high internal order were found in samples annealed over 1,100°C, and their fraction was found to increase with temperature. Evidences of twinning domains combined with probable remaining disordered portions of the structure imply that reordering processes occur during the quench. Twin domains are hereby proposed as a witness to thermally induced intra-layer-type cation disordering.

Direct Atomic Scale Observation of the Structure and Chemistry of Order/Disorder Interfaces

National Research Council Canada - National Science Library

Srinivasan, R; Banerjee, R; Hwang, J. Y; Viswanathan, G. B; Tiley, J; Fraser, H. L

2008-01-01

... distributed ordered intermetallic precipitates within a disordered matrix. The structure and chemistry at the precipitate/matrix interface plays a critical role in determining the effectiveness of the strengthening mechanism...

Mood Assessment via Animated Characters: A Novel Instrument to Evaluate Feelings in Young Children with Anxiety Disorders

Science.gov (United States)

Manassis, Katharina; Mendlowitz, Sandra; Kreindler, David; Lumsden, Charles; Sharpe, Jason; Simon, Mark D.; Woolridge, Nicholas; Monga, Suneeta; Adler-Nevo, Gili

2009-01-01

We evaluated a novel, computerized feelings assessment instrument (MAAC) in 54 children with anxiety disorders and 35 nonanxious children ages 5 to 11. They rated their feelings relative to 16 feeling animations. Ratings of feelings, order of feeling selection, and correlations with standardized anxiety measures were examined. Positive emotions…

Implementation of Order-wire Functionality in IRITEL NG-SDH devices

Directory of Open Access Journals (Sweden)

D. Katanić

2011-06-01

Full Text Available This paper describes the implementation of order-wire functionality in NG-SDH devices ODS2G5 and OTS622 IRITEL. The paper also describes the operation of order-wire in networks with arbitrary topologies, as well as the configuration of order-wire functionality by using network management software SUNCE. The presented solution for order-wire functionality is compared with VoIP solutions. The paper shows that the presented solution provides fast reaction to network failures, while keeping the implementation simple.

Innovations in the Poetry Form by Sheikh Sa'd od-Din Ahmad Ansari

Directory of Open Access Journals (Sweden)

Najaf Jowkar

2016-05-01

Full Text Available AbstractSheikh Sa'd od-Din Ahmad َ Ansari, the son of Mawlana Abd ol-Ghaffar Ibn Abd ol-Karim, is a mystic of the 12th and 13th centuries AH. Sa'd od-Din was born in Kabul in the village called Yahya Yahyaee in 1140 AH and died in the same place in 1225 AH (Ansari, 1374: 6. In his youth, he learned canonical law and theology from his father but was soon attracted to mysticism (Heravi, 1373, 43. After performing Hajj in between the years 1169-113 AH and getting permission to guide people from Naqshbandiyeh and Qaderiyeh mystic Sheikh Mohammad Saman Madani, he returned home and guided people untill the end of his life (Ansari, 1390: 3. Sheikh Sa'd od-Din was well learned in Islamic studies, Arabic language, rhetoric and sciences of his time. He was also familiar with the works of poets such as 'Attar, Rumi, Hafez, Ibn Arabi and other great names of mysticism. He was attached to Rumi and Hafez and has quoted them frequently in his works.Sheikh Sa'd od-Din wrote thirty six books and treatises including seven Divans and two Masnavis in Persian; He also wrote a book entitled The Mine of Unity and treatises  such as "Greetings Noble Tatar", "Habl ol-Matin" and "The Elite" in Arabic. He composed some poems in Arabic as well.At least from 1174 AH Sheikh Sa'd od-Din started to bring changes to the ancient Persian poetry; thus his deconstruction made poetical form much similar to contemporary Persian poetry. However, due to political and cultural distance between Iran and Afghanistan, we did not have a chance to get familiar with his innovations.His innovations consist of the following:1.      Refrained Masnavi (masnavi tarjee'band: He changed masnavi in a way that we can call it refrained masnavi, a sample of which is included in the paper. It consists of fifteen stanzas: The first stanza with eight lines, the second stanza fifty four lines, the twelfth stanza eleven lines and the other stanzas having equal lines. The line between

Super ODS steels R and D for fuel cladding of next generation nuclear systems. 5) Mechanical properties and microstructure

International Nuclear Information System (INIS)

Kasada, R.; Lee, S.G.; Lee, J.H.; Omura, T.; Zhang, C.H.; Dou, P.; Isselin, J.; Kimura, A.; Inoue, Masaki; Ukai, S.; Ohnuki, S.; Fujisawa, T.; Okuda, T.; Abe, F.

2009-01-01

The newly-developed Al-added ODS ferritic steels with an addition of Zr or Hf, so-called super ODS candidate steels, showed good notch-impact properties in the as-received condition with keeping the excellent creep strength. (author)

Microstructural Evolution of Advanced Radiation-Resistant ODS Steel with Different Lengths of Mechanical Alloying Time

Energy Technology Data Exchange (ETDEWEB)

Noh, Sanghoon; Kim, Ga Eon; Kang, Suk Hoon; Kim, Tae Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-05-15

Austenitic stainless steel may be one of the candidates because of good strength and corrosion resistance at the high temperatures, however irradiation swelling well occurred to 120dpa at high temperatures and this leads the decrease of the mechanical properties and dimensional stability. Compared to this, ferritic/ martensitic steel is a good solution because of excellent thermal conductivity and good swelling resistance. Unfortunately, the available temperature range of ferritic/martensitic steel is limited up to 650 .deg. C. ODS steel is the most promising structural material because of excellent creep and irradiation resistance by uniformly distributed nano-oxide particles with a high density which is extremely stable at the high temperature in ferritic/martensitic matrix. In this study, powder properties and microstructures of the ODS steel with different length of mechanical alloying time was investigated. The ODS steel milled 5h showed homogeneous grain structure with the highest hardness.

Microstructural Evolution of Advanced Radiation-Resistant ODS Steel with Different Lengths of Mechanical Alloying Time

International Nuclear Information System (INIS)

Noh, Sanghoon; Kim, Ga Eon; Kang, Suk Hoon; Kim, Tae Kyu

2015-01-01

Austenitic stainless steel may be one of the candidates because of good strength and corrosion resistance at the high temperatures, however irradiation swelling well occurred to 120dpa at high temperatures and this leads the decrease of the mechanical properties and dimensional stability. Compared to this, ferritic/ martensitic steel is a good solution because of excellent thermal conductivity and good swelling resistance. Unfortunately, the available temperature range of ferritic/martensitic steel is limited up to 650 .deg. C. ODS steel is the most promising structural material because of excellent creep and irradiation resistance by uniformly distributed nano-oxide particles with a high density which is extremely stable at the high temperature in ferritic/martensitic matrix. In this study, powder properties and microstructures of the ODS steel with different length of mechanical alloying time was investigated. The ODS steel milled 5h showed homogeneous grain structure with the highest hardness

Differences in psychopathology and behavioral characteristics of patients affected by conversion motor disorder and organic dystonia

Directory of Open Access Journals (Sweden)

Pastore A

2018-05-01

Full Text Available Adriana Pastore, Grazia Pierri, Giada Fabio, Silvia Ferramosca, Angelo Gigante, Maria Superbo, Roberta Pellicciari, Francesco Margari Department of Basic Medical Sciences, Neuroscience and Sense Organs, University of Bari “Aldo Moro”, Bari, Italy Purpose: Typically, the diagnosis of conversion motor disorder (CMD is achieved by the exclusion of a wide range of organic illnesses rather than by applying positive criteria. New diagnostic criteria are highly needed in this scenario. The main aim of this study was to explore the use of behavioral features as an inclusion criterion for CMD, taking into account the relationship of the patients with physicians, and comparing the results with those from patients affected by organic dystonia (OD. Patients and methods: Patients from the outpatient Movement Disorder Service were assigned to either the CMD or the OD group based on Fahn and Williams criteria. Differences in sociodemographics, disease history, psychopathology, and degree of satisfaction about care received were assessed. Patient–neurologist agreement about the etiological nature of the disorder was also assessed using the k-statistic. A logistic regression analysis estimated the discordance status as a predictor to case/control status. Results: In this study, 31 CMD and 31 OD patients were included. CMD patients showed a longer illness life span, involvement of more body regions, higher comorbidity with anxiety, depression, and borderline personality disorder, as well as higher negative opinions about physicians’ delivering of proper care. Contrary to our expectations, CMD disagreement with neurologists about the etiological nature of the disorder was not statistically significant. Additional analysis showed that having at least one personality disorder was statistically associated with the discordance status. Conclusion: This study suggests that CMD patients show higher conflicting behavior toward physicians. Contrary to our

The d-band of disordered Cu3Au as determined by constant initial state photoemission spectroscopy: a search for the origins of the disorder/order phase transition

International Nuclear Information System (INIS)

Stampfl, A.P.J.; Riley, J.D.; Leckey, R.C.G.

1998-01-01

Full text: Binary alloys must either order or phase separate as the temperature is lowered. Substitutionally disordered Cu 3 Au is known to order below a transition temperature of T c =390 deg C. The driving force (of ordering) is believed to be the lowering of free energy as a result of changes to the electronic and compositional structure. Details of the role that particular electronic levels play and the amount of coupling between the electronic and phonon structures, is as yet not fully understood. Gyorffy and Stocks have indeed suggested that instabilities in the electronic structure of the Fermi surface of Cu-Pd alloys may be the driving force for the disorder/order phase transition. It is expected, however, that the Fermi surfaces of ordered and disordered Cu 3 Au to be nearly similar. Our work on the Fermi surface of disordered Cu 3 Au supports this view. Large differences, however, are observed in the d-band region between the ordered and disordered phases and it has been suggested that these states may exhibit a type of electronic instability upon approaching T c . We present our initial study of the d-band region of disordered Cu 3 Au using a constant initial state spectroscopy technique which we previously developed to map the Fermi surface of Cu. Our technique allows the accurate k-space mapping of very flat bands such as d-levels. The k-space shape of the d-bands are compared to calculation and a discussion is given as to their likely role in the phase transition

OD in North American Schools: A Scandinavian View, with Comments by Matthew Miles and Michael Fullan. Uppsala Reports on Education, No. 20.

Science.gov (United States)

Berg, Gunnar

This report discusses the structural conditions under which organizational development (OD), as employed in the school systems of the United States and Canada, is more or less applicable to schools. The first section (chapters 1-6) reviews papers and books, concerning either OD in general or the ways in which the ideas of OD have been used in the…

Order-disorder transitions in lattice gases with annealed reactive constraints

Science.gov (United States)

Dudka, Maxym; Bénichou, Olivier; Oshanin, Gleb

2018-04-01

We study equilibrium properties of catalytically-activated reactions taking place on a lattice of adsorption sites. The particles undergo continuous exchanges with a reservoir maintained at a constant chemical potential μ and react when they appear at the neighbouring sites, provided that some reactive conditions are fulfilled. We model the latter in two different ways: in the Model I some fraction p of the bonds connecting neighbouring sites possesses special catalytic properties such that any two As appearing on the sites connected by such a bond instantaneously react and desorb. In the Model II some fraction p of the adsorption sites possesses such properties and neighbouring particles react if at least one of them resides on a catalytic site. For the case of annealed disorder in the distribution of the catalyst, which is tantamount to the situation when the reaction may take place at any point on the lattice but happens with a finite probability p, we provide an exact solution for both models for the interior of an infinitely large Cayley tree—the so-called Bethe lattice. We show that both models exhibit a rich critical behaviour: for the annealed Model I it is characterised by a transition into an ordered state and a re-entrant transition into a disordered phase, which both are continuous. For the annealed Model II, which represents a rather exotic model of statistical mechanics in which interactions of any particle with its environment have a peculiar Boolean form, the transition to an ordered state is always continuous, while the re-entrant transition into the disordered phase may be either continuous or discontinuous, depending on the value of p.

An explicit formula for the interface tension of the 2D Potts model

Science.gov (United States)

Borgs, Christian; Janke, Wolfhard

1992-11-01

We consider the exact correlation length calculations for the two-dimensional Potts model at the transition point β_t by Klümper, Schadschneider and Zittartz, and by Buffenoir and Wallon. We argue that the correlation length calculated by the latter authors is the correlation length in the disordered phase and then combine their result with duality and the assumption of complete wetting to give an explicit formula for the order-disorder interface tension σ_od of this model. The result is used to clarify a controversy stemming from different numerical simulations of σ_od.

Disordered configurations of the Glauber model in two-dimensional networks

Science.gov (United States)

Bačić, Iva; Franović, Igor; Perc, Matjaž

2017-12-01

We analyze the ordering efficiency and the structure of disordered configurations for the zero-temperature Glauber model on Watts-Strogatz networks obtained by rewiring 2D regular square lattices. In the small-world regime, the dynamics fails to reach the ordered state in the thermodynamic limit. Due to the interplay of the perturbed regular topology and the energy neutral stochastic state transitions, the stationary state consists of two intertwined domains, manifested as multiclustered states on the original lattice. Moreover, for intermediate rewiring probabilities, one finds an additional source of disorder due to the low connectivity degree, which gives rise to small isolated droplets of spins. We also examine the ordering process in paradigmatic two-layer networks with heterogeneous rewiring probabilities. Comparing the cases of a multiplex network and the corresponding network with random inter-layer connectivity, we demonstrate that the character of the final state qualitatively depends on the type of inter-layer connections.

Rounding by disorder of first-order quantum phase transitions: emergence of quantum critical points.

Science.gov (United States)

Goswami, Pallab; Schwab, David; Chakravarty, Sudip

2008-01-11

We give a heuristic argument for disorder rounding of a first-order quantum phase transition into a continuous phase transition. From both weak and strong disorder analysis of the N-color quantum Ashkin-Teller model in one spatial dimension, we find that, for N > or =3, the first-order transition is rounded to a continuous transition and the physical picture is the same as the random transverse field Ising model for a limited parameter regime. The results are strikingly different from the corresponding classical problem in two dimensions where the fate of the renormalization group flows is a fixed point corresponding to N-decoupled pure Ising models.

Study of the effect of magnetic ordering on order–disorder transitions in binary alloys

Energy Technology Data Exchange (ETDEWEB)

Jena, Ambika Prasad [Department of Condensed Matter and Materials Science, S.N. Bose National Centre for Basic Sciences, JD Block, Sector III, Salt Lake City, Kolkata 700098 (India); Sanyal, Biplab [Department of Physics and Astronomy, Uppsala University, Box 516, SE-75120 Uppsala (Sweden); Mookerjee, Abhijit, E-mail: abhijit@bose.res.in [Department of Condensed Matter and Materials Science, S.N. Bose National Centre for Basic Sciences, JD Block, Sector III, Salt Lake City, Kolkata 700098 (India)

2014-06-01

We set up a mean-field approximation in a random Ising model characterized by two order parameters: the local sublattice magnetization and a mean-field occupation variable which act as an order parameter for the order–disorder transition. In the effective model Hamiltonian the two order-parameters are coupled. We solve the coupled equations arising from this to describe the total phase diagram. The exchange energies for FeCo alloys have then been accurately obtained from first-principles based on the technique of orbital peeling and a Monte Carlo analysis using a coupled Metropolis-Kawasaki updating has been carried out. Our results reasonably successfully agree with earlier experimental data. - Highlights: • In this paper we study the effect of magnetic ordering on order–disorder transitions in binary alloys. • It describes a system with two order parameters, magnetic and chemical ordering, which are coupled. • We set up a mean-field theory for initial understanding and then carry out Monte Carlo simulations. • One parameter follows Kawasaki-dynamics and the other Metropolis. • It is an interesting system for study and we apply it to FeCo with exchanges calculated from first principles techniques.

Development of ODS ferritic-martensitic steels for application to high temperature and irradiation environment

International Nuclear Information System (INIS)

Lambard, V.

2000-01-01

Iron oxide dispersion strengthened alloys are candidate for nuclear fuel cladding. Therefore, it is crucial to control their microstructure in order to optimise their mechanical properties at temperatures up to 700 deg C. The industrial candidates, ODS ferritic alloys, present an anisotropic microstructure which induces a weakening of mechanical properties in transversal direction as well as the precipitation of brittle phases under thermal aging and irradiation. For this purpose, we tried to develop a material with isotropic properties. We studied several 9Cr-1Mo ferritic/martensitic alloys, strengthened or not by oxide dispersion. The mechanical alloying was performed by attribution and powders were consolidated by hot extrusion. In this work, different metallurgical characterisation techniques and modelling were used to optimise a new martensitic ODS alloy. Microstructural and chemical characterization of matrix has been done. The effect of austenitizing and isochronal tempering treatments on microstructure and hardness has been studied. Oxide distribution, size and chemical composition have been studied before and after high temperature thermal treatment. The study of phase transformation upon heating has permitted the extrapolation to the equilibrium temperature formation of austenite. Phase transformation diagrams upon cooling have been determined and the transformation kinetics have been linked to austenite grain size by a simple relation. Fine grain size is unfavourable for the targeted application, so a particular thermal treatment inducing a coarser grain structure has been developed. Finally, tensile properties have been determined for the different microstructures. (author)

Autism Spectrum Disorders in Popular Media: Storied Reflections of Societal Views

OpenAIRE

Kimberly Maich

2014-01-01

The purpose of this paper is to explore how exceptional characters with Autism Spectrum Disorders (ASD) are typified in a world that is becoming increasingly influenced by popular media. Considerations focus on how these representations may or may not affect realistic social understandings of children and adults with exceptionalities.  In order to make sense of and engage with such ‘storied representations’ a variety of perspectives are introduced depicting varied characterizations of those w...

Microstructural characterization of ODS ferritic steels at different processing stages

Energy Technology Data Exchange (ETDEWEB)

Gil, E., E-mail: egil@ceit.es; Ordás, N.; García-Rosales, C.; Iturriza, I., E-mail: iiturriza@ceit.es

2015-10-15

Highlights: • ODS ferritic stainless steel produced by new route without mechanical alloying. • Fully dense ferritic stainless steels containing Y and Ti were obtained by HIPping. • Y and Ti-rich precipitates prevent grain growth during heat treatment up to 1320 °C. • HIPping at 1220 °C dissolves the metastable oxides on PPBs. - Abstract: Nanostructured Oxide Dispersion Strengthened Reduced Activation Ferritic Stainless Steels (ODS RAF) are promising structural materials for fusion reactors, due to their ultrafine microstructure and the presence of a dispersion of Y–Ti–O nanoclusters that provide excellent creep strength at high temperatures (up to 750 °C). The traditional powder metallurgical route to produce these steels is based on Gas Atomization (GA) + Mechanical Alloying (MA) + HIP + ThermoMechanical Treatments (TMTs). Recently, alternative methods have arisen to avoid the MA step. In line with this new approach, ferritic stainless steel powders were produced by gas atomization and HIPped, after adjusting their oxygen, Y and Ti contents to form Y–Ti–O nanoclusters during subsequent heat treatments. The microstructure of as-HIPped steels mainly consists of ferrite grains, Y–Ti precipitates, carbides and oxides on Prior Particle Boundaries (PPBs). Post-HIP heat treatments performed at high temperatures (1270 and 1300 °C) evaluated the feasibility of achieving a complete dissolution of the oxides on PPBs and a precipitation of ultrafine Ti- and Y-rich oxides in the Fe14Cr2W matrix. FEG-SEM with extensive EDS analysis was used to characterize the microstructure of the atomized powders and the ODS-RAF specimens after HIP consolidation and post-HIP heat treatments. A deeper characterization of atomized powder was carried out by TEM.

Microstructural evolution in friction stir welding of nanostructured ODS alloys

International Nuclear Information System (INIS)

Chen, C.-L.; Tatlock, G.J.; Jones, A.R.

2010-01-01

Nanostructured oxide dispersion strengthened (ODS) Fe-based alloys manufactured by mechanical alloying (MA) are generally considered to be promising candidate materials for high-temperature applications up to at least 1100 o C because of their excellent creep strength and good oxidation resistance. However, a key issue with these alloys is the difficulty in using fusion welding techniques to join components due to oxide particle agglomeration and loss in the weld zone and the disruption and discontinuity in the grain structure introduced at the bond. In this study, the evolution of microstructure has been comprehensively studied in friction stir welds in a ferritic ODS alloy. Initially, electron backscattering diffraction (EBSD) was used to analyze the grain orientation, the grain boundary geometries and recrystallization behaviour. It suggested that deformation heterogeneities were introduced during the friction stirring process which facilitated the onset of recrystallization. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) were used to observe the effects of the friction stir welding (FSW) process on the grain structure and the distribution of Y 2 O 3 and other particles in the metal substrates in the FSW and adjacent regions, after the alloys had been recrystallized at temperatures up to 1380 o C for 1 h in air. The results show that fine-equiaxed grains and a uniform distribution of oxide particles were present in the friction stirred region but that the grain boundaries in the parent metal were pinned by particles. Friction stirring appeared to release these boundaries and allowed secondary recrystallization to occur after further heat treatment. The FSW process appears to be a promising technique for joining ferritic ODS alloys in the form of sheet and tube.

Procedural learning in Parkinson's disease, specific language impairment, dyslexia, schizophrenia, developmental coordination disorder, and autism spectrum disorders: A second-order meta-analysis.

Science.gov (United States)

Clark, Gillian M; Lum, Jarrad A G

2017-10-01

The serial reaction time task (SRTT) has been used to study procedural learning in clinical populations. In this report, second-order meta-analysis was used to investigate whether disorder type moderates performance on the SRTT. Using this approach to quantitatively summarise past research, it was tested whether autism spectrum disorder, developmental coordination disorder, dyslexia, Parkinson's disease, schizophrenia, and specific language impairment differentially affect procedural learning on the SRTT. The main analysis revealed disorder type moderated SRTT performance (p=0.010). This report demonstrates comparable levels of procedural learning impairment in developmental coordination disorder, dyslexia, Parkinson's disease, schizophrenia, and specific language impairment. However, in autism, procedural learning is spared. Copyright © 2017 Elsevier Inc. All rights reserved.

Low temperature time resolved photoluminescence in ordered and disordered Cu{sub 2}ZnSnS{sub 4} single crystals

Energy Technology Data Exchange (ETDEWEB)

Raadik, Taavi, E-mail: taavi.raadik@ttu.ee [Department of Materials Science, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn (Estonia); Krustok, Jüri; Kauk-Kuusik, M.; Timmo, K.; Grossberg, M. [Department of Materials Science, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn (Estonia); Ernits, K. [crystalsol OÜ, Akadeemia tee 15a, 12618 Tallinn (Estonia); Bleuse, J. [CEA-CNRS-UGA group “Nanophysique et Semiconducteurs”, Univ. Grenoble Alpes, INAC-PHELIQS, CEA, INAC-PHELIQS, CNRS, PLUM, F-38000 Grenoble (France)

2017-03-01

In this work we performed time-resolved micro-photoluminescence (TRPL) studies of Cu{sub 2}ZnSnS{sub 4} (CZTS) single crystals grown in molten KI salt. The order/disorder degree of CZTS was varied by the thermal post treatment temperature. Photoluminescence spectra measured at T=8 K showed an asymmetric band with a peak position of 1.33 eV and 1.27 eV for partially ordered and disordered structures, respectively. Thermal activation energies were found to be E{sub T} {sub (PO)} =65±9 meV for partially ordered and E{sub T(PD)} =27±4 meV for partially disordered. These low activation energy values indicating to the defect cluster recombination model for both partially ordered and disordered structures. TRPL was measured for both crystals and their decay curves were fitted with a stretched exponential function, in order to describe the charge carriers’ recombination dynamics at low temperature.

Dynamics of Dangling Od-Stretch at the Air/water Interface by Heterodyne-Detected Sfg Spectroscopy

Science.gov (United States)

Stiopkin, I. V.; Weeraman, C.; Shalhout, F.; Benderskii, A. V.

2009-06-01

SFG spectra of dangling OD-stretch at the air/water interface contain information on vibrational dephasing dynamics, ultrafast reorientational molecular motion, and vibrational energy transfer. To better separate these processes we conducted heterodyne-detected SFG experiments to measure real and imaginary contributions of the SFG spectrum of the dangling OD-stretch at the air/D_2O interface for SSP, PPP, and SPS polarizations. Variations in the temporal profiles of the SFG signals for these three polarizations will be also discussed.

Ion chromatography for determination of nitrite and nitrate in seawater using monolithic ODS columns.

Science.gov (United States)

Ito, Kazuaki; Takayama, Yohichi; Makabe, Nobuyuki; Mitsui, Ryo; Hirokawa, Takeshi

2005-08-12

A fast and highly sensitive ion chromatographic method using monolithic ODS columns was developed for the determination of nitrite (NO2-) and nitrate (NO3-) in seawater. Two monolithic ODS columns (50 mm x 4.6 mm i.d. + 100 mm x 4.6 mm i.d.) connected in series were coated and equilibrated with 5 mM cetyltrimethylammonium chloride (CTAC) aqueous solution. The column efficiency with 0.5 M NaCl as the mobile phase did not decrease in spite of the increase in flow rate of the mobile phase. Thus, good chromatograms were obtained within 3 minutes for NO2- and NO3 in artificial seawater without interferences by coexisting ions. The detection limit (S/N = 3) with UV detection at 225 nm was 0.8 and 1.6 microg/L for NO2- and NO3-, respectively. The characteristics of the monolithic CTA(+)-coated ODS columns were discussed. The present method was successfully applied to the fast and sensitive determination of NO2- and NO3- in real seawater samples.

Comparison of temperament and character personality traits in opiate and stimulant addicts

Directory of Open Access Journals (Sweden)

Fatemeh Sadeghi Pouya

2016-11-01

Full Text Available Background: Phenomenon of addiction as one of the social problems has a high prevalence, especially among youth. The aim of the present study was to compare personality traits based on the temperament and character inventory in opiate and stimulant addicts in Tehran.  Methods: In the present quasi-experimental study, 60 male addicts (30 opiate and 30 stimulant addicts who referred to addiction treatment centers in the suburbs of Tehran were selected through convenience sampling method and were studied using Temperament and Character Inventory (TCI. The participants were sorted according to their age and education.    Results: There was a significant difference between the two groups with regard to harm avoidance, reward dependence, cooperativeness, and self-transcendence traits. Thus, opiate addicts had higher levels of harm avoidance, reward dependence, and cooperativeness, and stimulant addicts had higher levels of self-transcendence. The significance level was set at P<0.01.  Conclusion: The obtained results showed that there was a significant difference between opiate and stimulant addicts. Opiate addicts gained higher scores, compared with stimulant addicts, in Temperament and Character Inventory variables. The obtained results also showed that stimulant addicts were suffering from more severe disorders than opiate addicts. Based on the means of the values of the TCI, personality traits reflecting personality disorders are detectable and predictable in substance abusers. This new understanding is important in the prevention and treatment of addiction.

New diagnostic characters for the order Sporolithales (Corallinophycidae, Rhodophyta).

Science.gov (United States)

Bahia, Ricardo G; Maneveldt, Gavin W; Amado-Filho, Gilberto M; Yoneshigue-Valentin, Yocie

2015-12-01

The diagnosis of the order Sporolithales is currently restricted to tetrasporangial anatomy. Until recently, there were few reports about gametangial, and more specifically carposporangial material for the Sporolithales. This study provides the first detailed observations of the anatomy of the mature carposporophyte phase from three species of Sporolithales commonly found in rhodolith beds from Brazil: Sporolithon episporum, S. ptychoides, and Sporolithon sp. Using these observations, along with previously published descriptions and illustrations from other representative species in the order, a comparison was made with the other three orders (Corallinales, Hapalidiales, and Rhodogorgonales) of the Corallinophycidae. We amend the diagnosis of the order Sporolithales to include the anatomy of the mature carposporophyte as follows: carposporangial conceptacles that lack a central fusion cell, but instead with numerous, short, one to two-celled, filaments that bear oblong terminal carposporangia that are distributed across the conceptacle chamber floor and walls. © 2015 Phycological Society of America.

Behaviour of ODS Steels in Cyclic Loading

Czech Academy of Sciences Publication Activity Database

Kuběna, Ivo; Kruml, Tomáš; Polák, Jaroslav

2016-01-01

Roč. 69, č. 2 (2016), s. 309-313 ISSN 0972-2815. [International Conference on CREEP , FATIGUE and CREEP -FATIGUE INTERACTION /7./. Kalpakkam, 19.01.2016-22.01.2016] R&D Projects: GA MŠk(CZ) ED1.1.00/02.0068; GA ČR GA15-08826S Institutional support: RVO:68081723 Keywords : ODS steels * low cycle fatigue * small fatigue crack * microstructure Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 0.533, year: 2016 http://link.springer.com/article/10.1007/s12666-015-0814-3

Effect of astaxanthin in combination with alpha-tocopherol or ascorbic acid against oxidative damage in diabetic ODS rats.

Science.gov (United States)

Nakano, Masako; Onodera, Aya; Saito, Emi; Tanabe, Miyako; Yajima, Kazue; Takahashi, Jiro; Nguyen, Van Chuyen

2008-08-01

The present study was performed to investigate the effect of astaxanthin in combination with other antioxidants against oxidative damage in streptozotocin (STZ)-induced diabetic Osteogenic Disorder Shionogi (ODS) rats. Diabetic-ODS rats were divided into five groups: control, astaxanthin, ascorbic acid, alpha-tocopherol, and tocotrienol. Each of the four experimental groups was administered a diet containing astaxanthin (0.1 g/kg), in combination with ascorbic acid (3.0 g/kg), alpha-tocopherol (0.1 g/kg), or tocotrienol (0.1 g/kg) for 20 wk. The effects of astaxanthin with other antioxidants on lipid peroxidation, urinary 8-hydroxy-2-deoxyguanosine (8-OHdG) excretion, serum creatinine (Cr) level, creatinine clearance (Ccr), and urinary protein content were assessed. The serum lipid peroxide levels and chemiluminescent (CL) intensity in the liver of the alpha-tocopherol and tocotrienol groups were significantly reduced in comparison to that of the control group. In the alpha-tocopherol group, urinary 8-OHdG excretion, serum Cr level, Ccr, urinary albumin excretion, and urinary protein concentration were significantly decreased as compared with those in the control group. Additionally, the CL intensity in the kidney of the alpha-tocopherol group was significantly lower, but that of the ascorbic acid group was significantly higher than that in the control group. These results indicate that dietary astaxanthin in combination with alpha-tocopherol has an inhibitory effect on oxidative stress. On the other hand, our study suggests that excessive ascorbic acid intake increases lipid peroxidation in diabetic rats.

Believable Characters

Science.gov (United States)

El-Nasr, Magy Seif; Bishko, Leslie; Zammitto, Veronica; Nixon, Michael; Vasiliakos, Athanasios V.; Wei, Huaxin

The interactive entertainment industry is one of the fastest growing industries in the world. In 1996, the U.S. entertainment software industry reported 2.6 billion in sales revenue, this figure has more than tripled in 2007 yielding 9.5 billion in revenues [1]. In addition, gamers, the target market for interactive entertainment products, are now reaching beyond the traditional 8-34 year old male to include women, Hispanics, and African Americans [2]. This trend has been observed in several markets, including Japan, China, Korea, and India, who has just published their first international AAA title (defined as high quality games with high budget), a 3D third person action game: Ghajini - The Game [3]. The topic of believable characters is becoming a central issue when designing and developing games for today's game industry. While narrative and character were considered secondary to game mechanics, games are currently evolving to integrate characters, narrative, and drama as part of their design. One can see this pattern through the emergence of games like Assassin's Creed (published by Ubisoft 2008), Hotel Dusk (published by Nintendo 2007), and Prince of Persia series (published by Ubisoft), which emphasized character and narrative as part of their design.

Ellunäod toovad välja "Rasputini" / Riina Mägi

Index Scriptorium Estoniae

Mägi, Riina, 1957-

2008-01-01

7. aug. Pilistvere vanas rehehoones esietenduvast Ain Saviaugu kirjutatud ja lavastatud suvetükist "Rasputin". Suvelavastuse toob välja Põltsamaa Teater Ellunäod koos professionaalsete näitlejatega. Nimiosas mängib näitlejast riigikogulane Indrek Saar

Karolinska Psychodynamic Profile for Sexual Disorders: KAPP-SD. A proposal for a psychodynamic rating scale for sexual disorders.

Science.gov (United States)

Soldati, Lorenzo; Köhl, John; Abraham, Georges; Bianchi Demicheli, Francesco; Wilczek, Alexander

2015-01-01

Our first objective in this paper was to review the literature on psychodynamic rating scales of sexual disorders. Our second objective, based on the findings from our review, was to develop a psychodynamic rating scale for people with sexual disorders: the KAPP-SD. We developed the KAPP-SD by modifying an existing psychodynamic rating scale, which assesses stable modes of mental functioning and character traits, the Karolinska Psychodynamic Profile (KAPP). We removed items 13 and 14 of the KAPP and replaced them with three other items-sexual fantasies, conceptions and role of gender identity, and conceptions and role of sexual orientation. These items are part of the assessment of an individual's sexuality and are used to evaluate a person with a sexual disorder psychodynamically. The KAPP-SD, a modified version of the KAPP, can be found in the Appendix. We developed the KAPP-SD in order to help sex therapists make a rigorous psychodynamic evaluation of persons with sexual disorders, which would give information on the prognosis and on the type of treatment to offer.

Fracture behaviour of the 14Cr ODS steel exposed to helium and liquid lead

Energy Technology Data Exchange (ETDEWEB)

Hojna, Anna, E-mail: Anna.Hojna@cvrez.cz [Centrum Vyzkumu Rez s.r.o., UJV Group, Rez 130, 250 68 Husinec (Czech Republic); Di Gabriele, Fosca [Centrum Vyzkumu Rez s.r.o., UJV Group, Rez 130, 250 68 Husinec (Czech Republic); Hadraba, Hynek; Husak, Roman; Kubena, Ivo [CEITEC IPM, Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Zizkova 22, 616 62 Brno (Czech Republic); Rozumova, Lucia; Bublikova, Petra; Kalivodova, Jana [Centrum Vyzkumu Rez s.r.o., UJV Group, Rez 130, 250 68 Husinec (Czech Republic); Matejicek, Jiri [Institute of Plasma Physics, Academy of Sciences of the Czech Republic, Za Slovankou 1782/3, 182 00 Praha (Czech Republic)

2017-07-15

This work describes the fracture behaviour of the 14Cr ODS steel produced by mechanical alloying process, after high temperature exposures. Small specimens were exposed to helium gas in a furnace at 720 °C for 500 h. Another set of specimens was exposed to flowing liquid lead in the COLONRI II loop at 650 °C for 1000 h. All specimens were tested for the impact and tensile behaviour. The impact test results are compared to other sets of specimens in the as received state and after isothermal annealing at 650 °C for 1000 h. The impact curves of the exposed materials showed positive shifts on the transition temperature. While the upper shelf value did not change in the Pb exposed ODS steel, it significantly increased in the He exposed one. The differences are discussed in terms of surface and subsurface microscopy observation. The embrittlement can be explained as the effect of a slight change in the grain boundary and size distribution combined with the depletion of sub-surface region from alloying elements forming oxide scale on the surface. - Highlights: •We compared the impact energy curves of as received, isothermally aged and He/Pb exposed ODS steel samples. •The highest transition temperature showed the ODS steel exposed to liquid Pb at 650 °C for 1000 h. •We observed the higher tendency of the He exposed samples to crack arrester delamination than the Pb exposed ones. •The crack arrested delamination induced apparent increase of impact energies.

Order-disorder phase transition in ZrV2Dsub(3.6)

International Nuclear Information System (INIS)

Didisheim, J.-J.; Yvon, K.; Tissot, P.

1981-01-01

The deuterated C15-type Laves phase ZrV 2 Dsub(3.6) undergoes a structural phase transition near room temperature (T of the order of 325 K). In the cubic high-temperature phase the deuterium atoms are disordered over two types of tetrahedral interstices, the centres of which are 1.3 A apart. In the tetragonal low-temperature phase the D atoms are ordered and occupy only the energetically more favourable interstices. The tetragonal structure is isotypic with the low-temperature phase of HfV 2 D 4 . The shortest D-D distance is 2.1 A. (author)

Optical character recognition reading aid for the visually impaired.

Science.gov (United States)

Grandin, Juan Carlos; Cremaschi, Fabian; Lombardo, Elva; Vitu, Ed; Dujovny, Manuel

2008-06-01

An optical character recognition (OCR) reading machine is a significant help for visually impaired patients. An OCR reading machine is used. This instrument can provide a significant help in order to improve the quality of life of patients with low vision or blindness.

Investigation of the relationships between mechanical properties and microstructure in a Fe-9%Cr ODS steel

OpenAIRE

Hary Benjamin; Guilbert Thomas; Wident Pierre; Baudin Thierry; Logé Roland; de Carlan Yann

2016-01-01

Ferritic-martensitic Oxide Dispersion Strengthened (ODS) steels are potential materials for fuel pin cladding in Sodium Fast Reactor (SFR) and their optimisation is essential for future industrial applications. In this paper, a feasibility study concerning the generation of tensile specimens using a quenching dilatometer is presented. The ODS steel investigated contains 9%Cr and exhibits a phase transformation between ferrite and austenite around 870 °C. The purpose was to generate different ...

Policing low-level disorder:police use of section 5 of the Public Order Act 1986

OpenAIRE

Brown, David; Ellis, Tom

1996-01-01

Following a Government review of public disorder law, the Public Order act 1986 introduced a structured series of offences to deal with disorder at all levels. At the lower end of the range, section 5 covers various forms of offensive conduct likely to cause harassment, alarm, or distress to vulnerable members of society.

Fast high-temperature consolidation of Oxide-Dispersion Strengthened (ODS) steels: process, microstructure, precipitation, properties

International Nuclear Information System (INIS)

Boulnat, Xavier

2014-01-01

This work aims to lighten the understanding of the behavior of a class of metallic materials called Oxide-Dispersion Strengthened (ODS) ferritic steels. ODS steels are produced by powder metallurgy with various steps including atomization, mechanical alloying and high-temperature consolidation. The consolidation involves the formation of nanoparticles in the steel and various evolutions of the microstructure of the material that are not fully understood. In this thesis, a novel consolidation technique assisted by electric field called 'Spark Plasma Sintering' (SPS) or 'Field-Assisted Sintering Technique' (FAST) was assessed. Excellent mechanical properties were obtained by SPS, comparable to those of conventional hot isostatic pressed (HIP) materials but with much shorter processing time. Also, a broad range of microstructures and thus of tensile strength and ductility were obtained by performing SPS on either milled or atomized powder at different temperatures. However, SPS consolidation failed to avoid heterogeneous microstructure composed of ultrafine-grained regions surrounded by micron grains despite of the rapid consolidation kinetics. A multi-scale characterization allowed to understand and model the evolution of this complex microstructure. An analytical evaluation of the contributing mechanisms can explain the appearance of the complex grain structure and its thermal stability during further heat treatments. Inhomogeneous distribution of plastic deformation in the powder is argued to be the major cause of heterogeneous recrystallization and further grain growth during hot consolidation. Even if increasing the solute content of yttrium, titanium and oxygen does not impede abnormal growth, it permits to control the fraction and the size of the retained ultrafine grains, which is a key-factor to tailor the mechanical properties. Since precipitation through grain boundary pinning plays a significant role on grain growth, a careful

TDPAC study of the order-disorder transition in HfV2H4

International Nuclear Information System (INIS)

Forker, M.; Herz, W.; Simon, D.

1989-01-01

The static and dynamic electric quadrupole interaction at highly dilute 111 Cd nuclei on V sites of the intermetallic hydride HfV 2 H 4 , investigated by time differential perturbed angular correlations (TDPAC), reflects the existence of an order-disorder transition at T=305 K, in agreement with neutron diffraction measurements. The asymmetry of the electric field gradient tensor indicates a gradually increasing order of hydrogen on the 2/2 tetrahedral interstices towards lower temperatures. Full order is reached at about 200 K. (orig.)

Evaluation of Pb–17Li compatibility of ODS Fe-12Cr-5Al alloys

Energy Technology Data Exchange (ETDEWEB)

Unocic, Kinga A., E-mail: unocicka@ornl.gov; Hoelzer, David T.

2016-10-15

The Dual Coolant Lead Lithium (DCLL: eutectic Pb–17Li and He) blanket concept requires improved Pb–17Li compatibility with ferritic steels in order to demonstrate acceptable performance in fusion reactors. As an initial step, static Pb-17at.%Li (Pb-17Li) capsule experiments were conducted on new oxide dispersion strengthened (ODS) FeCrAl alloys ((1) Y{sub 2}O{sub 3} (125Y), (2) Y{sub 2}O{sub 3} + ZrO{sub 2} (125YZ), (3) Y{sub 2}O{sub 3} + HfO{sub 2} (125YH), and (4) Y{sub 2}O{sub 3} + TiO{sub 2} (125YT)) produced at ORNL via mechanical alloying (MA). Tests were conducted in static Pb–17Li for 1000 h at 700 °C. Alloys showed promising compatibility with Pb–17Li with small mass change after testing for 125YZ, 125YH and 125YT, while the 125Y alloy experienced the highest mass loss associated with some oxide spallation and subsequent alloy dissolution. X-ray diffraction methods identified the surface reaction product as LiAlO{sub 2} on all four alloys. A small decrease (∼1 at.%) in Al content beneath the oxide scale was observed in all four ODS alloys, which extended 60 μm beneath the oxide/metal interface. This indicates improvements in alloy dissolution by decreasing the amount of Al loss from the alloy. Scales formed on 125YZ, 125YH and 125YT were examined via scanning transmission electron microscopy (S/TEM) and revealed incorporation of Zr-, Hf-, and Ti-rich precipitates within the LiAlO{sub 2} product, respectively. This indicates an inward scale growth mechanism. Future work in flowing Pb–17Li is needed to further evaluate the effectiveness of this strategy in a test blanket module. - Highlights: • Investigation of Pb-17Li compatibility of new ODS Fe-12Cr5Al. • Promising small mass change after static Pb-17Li exposure. • LiAlO{sub 2} formed on the surface during Pb-17Li exposure. • Oxide precipitates incorporated within the LiAlO{sub 2} product. • An inward scale growth mechanism was identified.

Hardening of ODS ferritic steels under irradiation with high-energy heavy ions

Science.gov (United States)

Ding, Z. N.; Zhang, C. H.; Yang, Y. T.; Song, Y.; Kimura, A.; Jang, J.

2017-09-01

Influence of the nanoscale oxide particles on mechanical properties and irradiation resistance of oxide-dispersion-strengthened (ODS) ferritic steels is of critical importance for the use of the material in fuel cladding or blanket components in advanced nuclear reactors. In the present work, impact of structures of oxide dispersoids on the irradiation hardening of ODS ferritic steels was studied. Specimens of three high-Cr ODS ferritic steels containing oxide dispersoids with different number density and average size were irradiated with high-energy Ni ions at about -50 °C. The energy of the incident Ni ions was varied from 12.73 MeV to 357.86 MeV by using an energy degrader at the terminal so that a plateau of atomic displacement damage (∼0.8 dpa) was produced from the near surface to a depth of 24 μm in the specimens. A nanoindentor (in constant stiffness mode with a diamond Berkovich indenter) and a Vickers micro-hardness tester were used to measure the hardeness of the specimens. The Nix-Gao model taking account of the indentation size effect (ISE) was used to fit the hardness data. It is observed that the soft substrate effect (SSE) can be diminished substantially in the irradiated specimens due to the thick damaged regions produced by the Ni ions. A linear correlation between the nano-hardeness and the micro-hardness was found. It is observed that a higher number density of oxide dispersoids with a smaller average diameter corresponds to an increased resistance to irradiation hardening, which can be ascribed to the increased sink strength of oxides/matrix interfaces to point defects. The rate equation approach and the conventional hardening model were used to analyze the influence of defect clusters on irradiation hardening in ODS ferritic steels. The numerical estimates show that the hardening caused by the interstitial type dislocation loops follows a similar trend with the experiment data.

Evolution of the placenta and associated reproductive characters in bats

DEFF Research Database (Denmark)

Carter, Anthony M; Mess, Andrea

2008-01-01

Recent advances in molecular phylogenetics indicate that the order Chiroptera is monophyletic and that one of four lineages of microbats (Rhinolophoidea) shares a common origin with megabats. Against this background we undertook a comprehensive analysis of placental evolution in bats. We defined...... that characterize higher-level clades within Chiroptera, i.e. the megabats and the four lineages of microbats. The character condition occurring in the last common ancestor of Chiroptera was unequivocal for 21 of the 25 characters included in the analysis. The data did not offer support for a megabat...

Resistance welding of ODS cladding fuel a nuclear reactor of the fourth generation

International Nuclear Information System (INIS)

Corpace, F.

2011-01-01

ODS steels (Oxide Dispersion Strengthened) are candidate materials for fuel cladding in Sodium Fast Reactors (SFR), one of the studied concepts for the fourth generation of nuclear power plants. These materials possess good mechanical properties at high temperatures due to a dispersion of nano-meter-sized oxides into the matrix. Previous studies have shown that melting can induce a decrease in mechanical properties at high temperatures due to modifications of the nano-meter-sized oxide dispersion. Therefore the fusion welding techniques are not recommended and the solid state bonding has to be evaluated. This study is focused on resistance upset welding. Welding experiments and numerical simulations of the process are coupled in this thesis. All laboratory tests (experimental and numerical) are built using the experimental design method to evaluate the effects of the process parameters on the welding and on the weld. A 20Cr ODS steel is used for the experimental protocol. The first part is dedicated to the study of the influence of the process parameters on the welding process. The numerical simulations show that the welding steps can be divided in three stages. First, the contact temperature between the faying surfaces increases. The process is then driven in the second stage by the pieces geometry and especially the current constriction due to the thinness of the clad compared to the massive plug. Therefore, the heat generation is mainly located in the clad part out of the electrode leading to its collapse which is the third stage of the welding step. The evaluation of the process parameters influence on the physical phenomena (thermal, mechanical...) occurring during the welding step, allows adjusting them in order to influence thermal and mechanical solicitations undergone by the pieces during the welding process. The second part consists in studying the influence of physical phenomena on the welds. In the process parameter range, some welds exhibit compactness

Correlation of microstructure and low cycle fatigue properties for 13.5Cr1.1W0.3Ti ODS steel

International Nuclear Information System (INIS)

He, P.; Klimenkov, M.; Möslang, A.; Lindau, R.; Seifert, H.J.

2014-01-01

Reduced activation oxide dispersion strengthened (ODS) steels are prospective structural materials for the blanket system and first wall components in Tokamak-type fusion reactors. Under the pulsed operation, these components will be predominantly subjected to cyclic thermal–mechanical loading which leads to inevitable fatigue damage. In this work, strain controlled isothermal fatigue tests were conducted for 13.5Cr1.1W0.3Ti ODS steel at 550 °C. The total strain range varied from 0.54% to 0.9%. After thermomechanical processing, 13.5CrWTi–ODS steel exhibits a remarkable lifetime extension with a factor of 10–20 for strain ranges Δε ⩽ 0.7%. 13.5Cr ODS steel shows no cyclic softening at all during the whole testing process irrespective of the strain range. TEM observations reveal ultrastable grain structure and constant dislocation densities around 10 14 m −2 , independent of the number of cycles or the applied strain amplitude. The presence of the stabilized ultrafine Y–Ti–O dispersoids enhances the microstructural stability and therefore leads to outstanding fatigue resistance for 13.5Cr1.1W0.3Ti–ODS steel

Correlation of microstructure and low cycle fatigue properties for 13.5Cr1.1W0.3Ti ODS steel

Energy Technology Data Exchange (ETDEWEB)

He, P., E-mail: pei.he@kit.edu; Klimenkov, M.; Möslang, A.; Lindau, R.; Seifert, H.J.

2014-12-15

Reduced activation oxide dispersion strengthened (ODS) steels are prospective structural materials for the blanket system and first wall components in Tokamak-type fusion reactors. Under the pulsed operation, these components will be predominantly subjected to cyclic thermal–mechanical loading which leads to inevitable fatigue damage. In this work, strain controlled isothermal fatigue tests were conducted for 13.5Cr1.1W0.3Ti ODS steel at 550 °C. The total strain range varied from 0.54% to 0.9%. After thermomechanical processing, 13.5CrWTi–ODS steel exhibits a remarkable lifetime extension with a factor of 10–20 for strain ranges Δε ⩽ 0.7%. 13.5Cr ODS steel shows no cyclic softening at all during the whole testing process irrespective of the strain range. TEM observations reveal ultrastable grain structure and constant dislocation densities around 10{sup 14} m{sup −2}, independent of the number of cycles or the applied strain amplitude. The presence of the stabilized ultrafine Y–Ti–O dispersoids enhances the microstructural stability and therefore leads to outstanding fatigue resistance for 13.5Cr1.1W0.3Ti–ODS steel.

A simple approach for the modeling of an ODS steel mechanical behavior in pilgering conditions

Science.gov (United States)

Vanegas-Márquez, E.; Mocellin, K.; Toualbi, L.; de Carlan, Y.; Logé, R. E.

2012-01-01

The optimization of the forming of ODS tubes is linked to the choice of an appropriated constitutive model for modeling the metal forming process. In the framework of a unified plastic constitutive theory, the strain-controlled cyclic characteristics of a ferritic ODS steel were analyzed and modeled with two different tests. The first test is a classical tension-compression test, and leads to cyclic softening at low to intermediate strain amplitudes. The second test consists in alternated uniaxial compressions along two perpendicular axes, and is selected based on the similarities with the loading path induced by the Fe-14Cr-1W-Ti ODS cladding tube pilgering process. This second test exhibits cyclic hardening at all tested strain amplitudes. Since variable strain amplitudes prevail in pilgering conditions, the parameters of the considered constitutive law were identified based on a loading sequence including strain amplitude changes. A proposed semi automated inverse analysis methodology is shown to efficiently provide optimal sets of parameters for the considered loading sequences. When compared to classical approaches, the model involves a reduced number of parameters, while keeping a good ability to capture stress changes induced by strain amplitude changes. Furthermore, the methodology only requires one test, which is an advantage when the amount of available material is limited. As two distinct sets of parameters were identified for the two considered tests, it is recommended to consider the loading path when modeling cold forming of the ODS steel.

Electronic, elastic, thermodynamic properties and structure disorder of γ-AlON solid solution from ab initio calculations

International Nuclear Information System (INIS)

Wang, Yuezhong; Lu, Tiecheng; Zhang, Rongshi; Jiang, Shengli; Qi, Jianqi; Wang, Ying; Chen, Qingyun; Miao, Naihua; He, Duanwei

2013-01-01

Highlights: ► We reassess the chemical bonding character of γ-AlON which shows strong ionicity. ► γ-AlON single-crystals exhibit highly elastic anisotropy. ► The thermodynamic properties are investigated in a wider temperature/pressure range. ► γ-AlON is an O/N partially disordered structure. - Abstract: Spinel aluminium oxynitride (γ-AlON), as a kind of transparent ceramic material expectable, is studied using the ab initio density functional method, in terms of electronic, elastic, thermodynamic properties and structure disorder. The results show that γ-AlON exhibits strong ionicity, as quantitatively expressed by (Al O 2.43+ ) 15 (Al T 2.41+ ) 8 (O 1.64- ) 27 (N 2.27- ) 5 from our reassessment of the ionic character. We summarize and speculate that the considered oxynitride single-crystals exhibit highly elastic anisotropy. The interpretation of the thermodynamic properties of γ-AlON according to quasi-harmonic Debye model confirm the available experiments and are extended to a wider temperature/pressure range. This material holds high elastic strength under extreme environments, where dB/dT absolute value is less than 0.03 GPa/K, independent of the pressure. Finally, we study the O/N structure disorder character of γ-AlON solid solution by investigating nine possible crystal structures. It is found that γ-AlON should be partially disordered, and in fact, the O/N ordering has a significant effect on the properties.

High temperature deformation mechanisms in the 14% Cr ODS alloy

Czech Academy of Sciences Publication Activity Database

Šiška, Filip; Stratil, Luděk; Hadraba, Hynek; Fintová, Stanislava; Kuběna, Ivo; Záležák, Tomáš; Bártková, Denisa

2017-01-01

Roč. 689, MAR (2017), s. 34-39 ISSN 0921-5093 R&D Projects: GA ČR(CZ) GA14-25246S; GA ČR GJ15-21292Y Institutional support: RVO:68081723 Keywords : ODS steel * Plastic ity * Stress relaxation * Dislocations Subject RIV: JG - Metallurgy OBOR OECD: Materials engineering Impact factor: 3.094, year: 2016

A REVIEW: OPTICAL CHARACTER RECOGNITION

OpenAIRE

Swati Tomar*1 & Amit Kishore2

2018-01-01

This paper presents detailed review in the field of Optical Character Recognition. Various techniques are determine that have been proposed to realize the center of character recognition in an optical character recognition system. Even though, sufficient studies and papers are describes the techniques for converting textual content from a paper document into machine readable form. Optical character recognition is a process where the computer understands automatically the image of handwritten ...

Knowing Chinese character grammar.

Science.gov (United States)

Myers, James

2016-02-01

Chinese character structure has often been described as representing a kind of grammar, but the notion of character grammar has hardly been explored. Patterns in character element reduplication are particularly grammar-like, displaying discrete combinatoriality, binarity, phonology-like final prominence, and potentially the need for symbolic rules (X→XX). To test knowledge of these patterns, Chinese readers were asked to judge the acceptability of fake characters varying both in grammaticality (obeying or violating reduplication constraints) and in lexicality (of the reduplicative configurations). While lexical knowledge was important (lexicality improved acceptability and grammatical configurations were accepted more quickly when also lexical), grammatical knowledge was important as well, with grammaticality improving acceptability equally for lexical and nonlexical configurations. Acceptability was also higher for more frequent reduplicative elements, suggesting that the reduplicative configurations were decomposed. Chinese characters present an as-yet untapped resource for exploring fundamental questions about the nature of the human capacity for grammar. Copyright © 2015 Elsevier B.V. All rights reserved.

The Use of Orientation/Decision/Do/Discuss/Reflect (OD3R) Method to Increase Critical Thinking Skill and Practical Skill in Biochemistry Learning

Science.gov (United States)

Anwar, Yunita Arian Sani; Senam, Senam; Laksono, Endang W.

2018-01-01

We have developed an OD3R method that can be applied on Biochemistry learning. This OD3R consists of 5 phases: orientation, decision, do, discuss, and reflect to connect lessons in the class with practice in the laboratory. Implementation of OD3R method was done in 2 universities in Yogyakarta to increase critical thinking skill and practical…

A simple approach for the modeling of an ODS steel mechanical behavior in pilgering conditions

International Nuclear Information System (INIS)

Vanegas-Márquez, E.; Mocellin, K.; Toualbi, L.; Carlan, Y. de; Logé, R.E.

2012-01-01

Highlights: ► The mechanical behavior of an ODS steel is investigated under pilgering conditions. ► Two mechanical tests show different trends, and are described with a simple model. ► Model parameters are identified using one sample, and considering strain range changes. ► The constitutive model involves few parameters but their values are strain path dependent. ► One identified set of parameters would be appropriate for FEM modeling of pilgering. - Abstract: The optimization of the forming of ODS tubes is linked to the choice of an appropriated constitutive model for modeling the metal forming process. In the framework of a unified plastic constitutive theory, the strain-controlled cyclic characteristics of a ferritic ODS steel were analyzed and modeled with two different tests. The first test is a classical tension–compression test, and leads to cyclic softening at low to intermediate strain amplitudes. The second test consists in alternated uniaxial compressions along two perpendicular axes, and is selected based on the similarities with the loading path induced by the Fe–14Cr–1W–Ti ODS cladding tube pilgering process. This second test exhibits cyclic hardening at all tested strain amplitudes. Since variable strain amplitudes prevail in pilgering conditions, the parameters of the considered constitutive law were identified based on a loading sequence including strain amplitude changes. A proposed semi automated inverse analysis methodology is shown to efficiently provide optimal sets of parameters for the considered loading sequences. When compared to classical approaches, the model involves a reduced number of parameters, while keeping a good ability to capture stress changes induced by strain amplitude changes. Furthermore, the methodology only requires one test, which is an advantage when the amount of available material is limited. As two distinct sets of parameters were identified for the two considered tests, it is recommended to

A Non-linear Predictive Model of Borderline Personality Disorder Based on Multilayer Perceptron.

Science.gov (United States)

Maldonato, Nelson M; Sperandeo, Raffaele; Moretto, Enrico; Dell'Orco, Silvia

2018-01-01

Borderline Personality Disorder is a serious mental disease, classified in Cluster B of DSM IV-TR personality disorders. People with this syndrome presents an anamnesis of traumatic experiences and shows dissociative symptoms. Since not all subjects who have been victims of trauma develop a Borderline Personality Disorder, the emergence of this serious disease seems to have the fragility of character as a predisposing condition. Infect, numerous studies show that subjects positive for diagnosis of Borderline Personality Disorder had scores extremely high or extremely low to some temperamental dimensions (harm Avoidance and reward dependence) and character dimensions (cooperativeness and self directedness). In a sample of 602 subjects, who have had consecutive access to an Outpatient Mental Health Service, it was evaluated the presence of Borderline Personality Disorder using the semi-structured interview for the DSM IV-TR personality disorders. In this population we assessed the presence of dissociative symptoms with the Dissociative Experiences Scale and the personality traits with the Temperament and Character Inventory developed by Cloninger. To assess the weight and the predictive value of these psychopathological dimensions in relation to the Borderline Personality Disorder diagnosis, a neural network statistical model called "multilayer perceptron," was implemented. This model was developed with a dichotomous dependent variable, consisting in the presence or absence of the diagnosis of borderline personality disorder and with five covariates. The first one is the taxonomic subscale of dissociative experience scale, the others are temperamental and characterial traits: Novelty-Seeking, Harm-Avoidance, Self-Directedness and Cooperativeness. The statistical model, that results satisfactory, showed a significance capacity (89%) to predict the presence of borderline personality disorder. Furthermore, the dissociative symptoms seem to have a greater influence than

A Non-linear Predictive Model of Borderline Personality Disorder Based on Multilayer Perceptron

Directory of Open Access Journals (Sweden)

Nelson M. Maldonato

2018-04-01

Full Text Available Borderline Personality Disorder is a serious mental disease, classified in Cluster B of DSM IV-TR personality disorders. People with this syndrome presents an anamnesis of traumatic experiences and shows dissociative symptoms. Since not all subjects who have been victims of trauma develop a Borderline Personality Disorder, the emergence of this serious disease seems to have the fragility of character as a predisposing condition. Infect, numerous studies show that subjects positive for diagnosis of Borderline Personality Disorder had scores extremely high or extremely low to some temperamental dimensions (harm Avoidance and reward dependence and character dimensions (cooperativeness and self directedness. In a sample of 602 subjects, who have had consecutive access to an Outpatient Mental Health Service, it was evaluated the presence of Borderline Personality Disorder using the semi-structured interview for the DSM IV-TR personality disorders. In this population we assessed the presence of dissociative symptoms with the Dissociative Experiences Scale and the personality traits with the Temperament and Character Inventory developed by Cloninger. To assess the weight and the predictive value of these psychopathological dimensions in relation to the Borderline Personality Disorder diagnosis, a neural network statistical model called “multilayer perceptron,” was implemented. This model was developed with a dichotomous dependent variable, consisting in the presence or absence of the diagnosis of borderline personality disorder and with five covariates. The first one is the taxonomic subscale of dissociative experience scale, the others are temperamental and characterial traits: Novelty-Seeking, Harm-Avoidance, Self-Directedness and Cooperativeness. The statistical model, that results satisfactory, showed a significance capacity (89% to predict the presence of borderline personality disorder. Furthermore, the dissociative symptoms seem to have a

Experimental study on microstructure characters of foamed lightweight soil

Science.gov (United States)

Qiu, Youqiang; Li, Yongliang; Li, Meixia; Liu, Yaofu; Zhang, Liujun

2018-01-01

In order to verify the microstructure of foamed lightweight soil and its characters of compressive strength, four foamed lightweight soil samples with different water-soild ratio were selected and the microstructure characters of these samples were scanned by electron microscope. At the same time, the characters of compressive strength of foamed lightweight soil were analyzed from the microstructure. The study results show that the water-soild ratio has a prominent effect on the microstructure and compressive strength of foamed lightweight soil, with the decrease of water-solid ratio, the amount and the perforation of pores would be reduced significantly, thus eventually forming a denser and fuller interior structure. Besides, the denser microstructure and solider pore-pore wall is benefit to greatly increase mechanical intensity of foamed lightweight soil. In addition, there are very few acicular ettringite crystals in the interior of foamed lightweight soil, its number is also reduced with the decrease in water-soild ratio.

Fracture behavior of the ODS steels prepared by internal oxidation

Czech Academy of Sciences Publication Activity Database

Stratil, Luděk; Šiška, Filip; Hadraba, Hynek; Bártková, Denisa; Fintová, Stanislava; Puchý, V.

2017-01-01

Roč. 124, NOV (2017), s. 1108-1111 ISSN 0920-3796 R&D Projects: GA ČR GJ15-21292Y; GA ČR(CZ) GA14-25246S Institutional support: RVO:68081723 Keywords : ODS * Internal oxidation * Fracture toughness * J-R curve * Fracture analysis Subject RIV: JG - Metallurgy OBOR OECD: Materials engineering Impact factor: 1.319, year: 2016

Creep in ODS copper reinforced with alumina short fibres - DRS copper

Czech Academy of Sciences Publication Activity Database

Kuchařová, Květa; Zhu, S. J.; Čadek, Josef

2003-01-01

Roč. 355, 1-2 (2003), s. 267-276 ISSN 0921-5093 R&D Projects: GA AV ČR IBS2041001 Institutional research plan: CEZ:AV0Z2041904 Keywords : Creep * ODS copper * Load transfer Subject RIV: JI - Composite Materials Impact factor: 1.365, year: 2003

Broadband polarized emission from P(NDI2OD-T2) polymer.

Science.gov (United States)

Ulrich, Steve; Sutch, Tabitha; Szulczewski, Greg; Schweizer, Matthias; Barbosa, Newton; Araujo, Paulo

2018-05-18

We investigate the P(NDI2OD-T2) photophysical properties via absorbance and fluorescence spectroscopy, in association with the experimental approach baptized Stokes Spectroscopy, which provides valuable material information through the acquisition and analysis of the fluorescence polarization degree. By changing solvents and using different samples such as solutions, thick, and thin films, it is possible to control the polarization degree spectrum associated to the fluorescence emitted by the polymer's isolated chains and aggregates. We show that the polarization degree could become a powerful tool to obtain information related to the samples morphology, which is connected to their microscopic structure. Moreover, the polarization degree spectra suggest that depolarization effects linked to energy and charge transfer mechanisms are likely taking place. Our findings indicate that P(NDI2OD-T2) polymers are excellent candidates for the advancement of organic technologies that rely on the emission and detection of polarized lights. © 2018 IOP Publishing Ltd.

Analysis of high temperature deformation mechanism in ODS EUROFER97 alloy

Science.gov (United States)

Ramar, A.; Spätig, P.; Schäublin, R.

2008-12-01

Oxide dispersion in tempered martensitic EUROFER97 steel is an efficient approach to improve its strength. The oxide dispersion strengthened (ODS) EUROFER97 steel shows a good strength up to 600 °C, but degrades rapidly beyond that temperature. To understand the origin in the microstructure of this drop in strength in situ heating experiment in TEM was performed from room temperature to 1000 °C. Upon heating neither microstructure changes nor dislocation movement are observed up to 600 °C. Movement of dislocations are observed above 680 °C. Phase transformation to austenite starts at 840 °C. Yttria particles remain stable up to 1000 °C. Changes in mechanical properties thus do not relate to changes in yttria dispersion. It is attempted to relate these observations to the thermal activation parameters measured by the technique of conventional strain rate experiment, which allow to identify at a mesoscopic scale the microstructural mechanisms responsible for the degradation of ODS steel at high temperatures.

Birth order and postpartum psychiatric disorders.

Science.gov (United States)

Munk-Olsen, Trine; Jones, Ian; Laursen, Thomas Munk

2014-05-01

Primiparity is a well-established and significant risk factor for postpartum psychosis and especially bipolar affective disorders. However, no studies have, to our knowledge, quantified the risk of psychiatric disorders after the first, second, or subsequent births. The overall aim of the present study was to study the risk of first-time psychiatric episodes requiring inpatient treatment after the birth of the first, second, or third child. A cohort comprising 750,127 women was defined using information from Danish population registries. Women were followed individually from the date of birth of their first, second, or third child through the following 12 months over the period 1970-2011. The outcome of interest was defined as first-time admissions to a psychiatric hospital with any type of psychiatric disorder. Women who had a first psychiatric episode which required inpatient treatment after their first (n = 1,327), second (n = 735), or third (n = 238) delivery were included. The highest risk was found in primiparous mothers 10-19 days postpartum [relative risk (RR) = 8.65; 95% confidence interval (CI): 6.89-10.85]. After the second birth, the highest risk was at 60-89 days postpartum (RR = 2.01; 95% CI: 1.52-2.65), and there was no increased risk after the third birth. The effect of primiparity was strongest for bipolar disorders. Primiparity is a significant risk factor for experiencing a first-time episode with a psychiatric disorder, especially bipolar disorders. A second birth was associated with a smaller risk, and there was no increased risk after the third birth. The risk of postpartum episodes after the second delivery increased with increasing inter-pregnancy intervals, a result which warrants further investigation. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A Missing Piece of the Contemporary Character Education Puzzle: The Individualisation of Moral Character

Science.gov (United States)

Chen, Yi-Lin

2013-01-01

The different sorts of virtuous people who display various virtues to a remarkable degree have brought the issue of individualisation of moral character to the forefront. It signals a more personal dimension of character development which is notoriously ignored in the current discourse on character education. The case is made that since in…

MICROSTRUCTURE AND MECHANICAL STRENGTH OF SURFACE ODS TREATED ZIRCALOY-4 SHEET USING LASER BEAM SCANNING

Directory of Open Access Journals (Sweden)

HYUN-GIL KIM

2014-08-01

Full Text Available The surface modification of engineering materials by laser beam scanning (LBS allows the improvement of properties in terms of reduced wear, increased corrosion resistance, and better strength. In this study, the laser beam scan method was applied to produce an oxide dispersion strengthened (ODS structure on a zirconium metal surface. A recrystallized Zircaloy-4 alloy sheet with a thickness of 2 mm, and Y2O3 particles of 10 μm were selected for ODS treatment using LBS. Through the LBS method, the Y2O3 particles were dispersed in the Zircaloy-4 sheet surface at a thickness of 0.4 mm, which was about 20% when compared to the initial sheet thickness. The mean size of the dispersive particles was 20 nm, and the yield strength of the ODS treated plate at 500°C was increased more than 65 % when compared to the initial state. This strength increase was caused by dispersive Y2O3 particles in the matrix and the martensite transformation of Zircaloy-4 matrix by the LBS.

Ion-induced swelling of ODS ferritic alloy MA957 tubing to 500 dpa

Energy Technology Data Exchange (ETDEWEB)

Toloczko, M.B., E-mail: mychailo.toloczko@pnnl.gov [Pacific Northwest National Laboratory, Richland, WA 99354 (United States); Garner, F.A. [Radiation Effects Consulting, Richland, WA 99354 (United States); Voyevodin, V.N.; Bryk, V.V.; Borodin, O.V.; Mel’nychenko, V.V.; Kalchenko, A.S. [Kharkov Institute of Physics and Technology, Kharkov (Ukraine)

2014-10-15

In order to study the potential swelling behavior of the ODS ferritic alloy MA957 at very high dpa levels, specimens were prepared from pressurized tubes that were unirradiated archives of tubes previously irradiated in FFTF to doses as high as 110 dpa. These unirradiated specimens were irradiated with 1.8 MeV Cr{sup +} ions to doses ranging from 100 to 500 dpa and examined by transmission electron microscopy. No co-injection of helium or hydrogen was employed. It was shown that compared to several tempered ferritic/martensitic steels irradiated in the same facility, these tubes were rather resistant to void swelling, reaching a maximum value of only 4.5% at 500 dpa and 450 °C. In this fine-grained material, the distribution of swelling was strongly influenced by the presence of void denuded zones along the grain boundaries.

Observation of field-induced long-range order in disordered Sr14Cu24O41

International Nuclear Information System (INIS)

Ohsugi, S.; Matsumoto, S.; Kitaoka, Y.; Matsuda, M.; Uehara, M.; Nagata, T.; Akimitsu, J.

2004-01-01

Field-induced magnetic order in a structural disordered single-crystal Sr 14 Cu 24 O 41 (Sr 14 -B) has been observed in the Cu-nuclear magnetic resonance (NMR) measurements for the ladder sites below 20 K under the magnetic field H∼11 T. For the Zhang Rice (ZR) sites in the chains, the spectrum splits below 20 K due to an appearance of the internal field, whereas that of less disordered Sr 14 -A does not. This gives an evidence of three-dimensional (3D) long-range (LR) ordering in Sr 14 -B below T N ∼20 K under H∼11 T

Zastupljenost mlijeka i mliječnih proizvoda u bolničkoj prehrani trudnica oboljelih od šećerne bolesti

OpenAIRE

Panjkota Krbavčić, Ines; Colić Barić, Irena; Jurković, Nada

2000-01-01

Svrha ovoga rada bila je odrediti udjel mlijeka i mliječnih proizvoda u prehrani trudnica oboljelih od šećerne bolesti zbog važnosti koje ova skupina namirnica ima u prehrani ove populacije. Analizirani su bolnički obroci pripremani isključivo za trudnice oboljele od šećerne bolesti. Rezultati su obrađeni matematički i statistički, te uspoređeni s važećim preporukama. Petnaestodnevnim praćenjem dnevnih jelovnika hospitaliziranih trudnica oboljelih od šećerne bolesti može se zaključiti da trud...

Character Issues: Reality Character Problems and Solutions through Education in Indonesia

Science.gov (United States)

Saidek, Abdul Rahim; Islami, Raisul; Abdoludin

2016-01-01

Weak character education raises the problem of corruption, a fight between students, free sex, drugs and rape/abortion indicate that the issue of character education of the nation must be improved and the concern of all parties, the nation's leaders, law enforcement officers, educators, religious leaders, groups and other etc. There are two…

Zaburzenia odżywiania u młodzieży

Directory of Open Access Journals (Sweden)

Karolina Kierus

2012-12-01

Full Text Available Zaburzenia odżywiania o typie jadłowstrętu psychicznego, jadłowstrętu atypowego oraz bulimii zgodnie z aktu‑ alną wiedzą medyczną należą do poważnych zaburzeń psychicznych występujących u młodzieży w okresie doj‑ rzewania. Na zachorowanie najbardziej narażone są dziewczęta w wieku 14‑18 lat (w przypadku anoreksji, z tendencją do obniżania dolnej granicy wieku. Przyczyną tych zaburzeń jest nie tyle dążenie do uzyskania szczupłej sylwetki, ile zespół wielu czynników wpływających na rozwój emocjonalny dziecka, proces separacji – indywidualizacji, poczucie własnej wartości, akceptacja siebie i swojego ciała. Bardzo istotną rolę w rozwoju zaburzeń odżywiania u młodzieży odgrywają: dysfunkcja systemu rodzinnego, nadmiernie kontrolująca matka, stawiająca wysokie wymagania, oraz charakterystyczne cechy osobowości chorego, między innymi wygórowa‑ na ambicja, perfekcjonizm, silna wola, determinacja w dążeniu do osiągnięcia celu. Objawy jadłowstrętu psy‑ chicznego pojawiają się zazwyczaj skrycie, najczęściej rozpoczynają się od stopniowej rezygnacji z wybranych pokarmów z diety, np. słodyczy, pieczywa, mięsa, wprowadzania zasad „zdrowego żywienia” itp. W początko‑ wej fazie choroby ograniczanie jedzenia pełni funkcję czynnika wzmacniającego, dającego chorej poczucie kon‑ troli, satysfakcji czy nawet sukcesu. Zachowania bulimiczne przez długie miesiące pozostają niezauważone przez otoczenie chorego, gdyż najczęściej nie dochodzi do utraty masy ciała. U ponad połowy osób cierpią‑ cych na anoreksję pojawiają się myśli suicydalne oraz próby samobójcze, znaczna część chorych podejmuje także zachowania autodestrukcyjne. Leczenie pacjentów z zaburzeniami odżywiania jest długotrwałe. Oprócz prawidłowo prowadzonej terapii żywieniowej konieczne są stała opieka psychiatryczna, psychoterapia indywi‑ dualna, psychoedukacja opiekunów oraz terapia

Study of the stability of the nanometer-sized oxides dispersed in ODS steels under ion irradiations

International Nuclear Information System (INIS)

Lescoat, M.-L.

2012-01-01

Oxide Dispersion Strengthened (ODS) Ferritic-Martensitic (FM) alloys are expected to play an important role as cladding materials in Generation IV sodium fast reactors operating in extreme temperature (400-500 C) and irradiation conditions (up to 200 dpa). Since nano-oxides give ODS steels their high temperature strength, the stability of these particles is an important issue. The present study evaluates the radiation response of nano-oxides by the use of in-situ and ex-situ ion irradiations performed on both Fe18Cr1W0,4Ti +0,3 Y 2 O 3 and Fe18Cr1W0,4Ti + 0.3 MgO ODS steels. In particular, the results showed that Y-Ti-O nano-oxides are quite stable under very high irradiation dose, namely 219 dpa at 500 C, and that the oxide interfacial structures are likely playing an important role on the behavior under irradiation (oxide stability and point defect recombination. (author) [fr

Electronic structure of disordered alloys - I: self-consistent cluster CPA incorporating off-diagonal disorder and short-range order

International Nuclear Information System (INIS)

Kumar, V.; Mookerjee, A.; Srivastava, V.K.

1980-09-01

We have developed here a self-consistent coherent potential approximation generalized to take into account effect of clusters. Off-diagonal disorder and short-range order are taken into account. A graphical method married to the recursion technique, enables us to work on realistic three-dimensional lattices. Calculations are shown for a binary alloy on a diamond lattice. (author)

Thermal conductivity of solid cyclohexane in orientationally ordered and disordered phases

International Nuclear Information System (INIS)

Konstantinov, V. A.; Revyakin, V. P.; Sagan, V. V.; Pursky, O. I.; Sysoev, V. M.

2011-01-01

Thermal conductivity Λ P of solid cyclohexane is measured at a pressure P = 0.1 MPa in the temperature range from 80 K to the melting point, which covers the ranges of low-temperature orientationally ordered phase II and high-temperature orientationally disordered phase I. Thermal conductivity Λ V is measured at a constant volume in orientationally disordered phase I. The thermal conductivity measured at atmospheric pressure decreases with increasing temperature as Λ P ∝ T −1.15 in phase II, whereas Λ P ∝ T −0.3 in phase I. As temperature increases, isochoric thermal conductivity Λ V in phase I increases gradually. The experimental data are described in terms of a modified Debye model of thermal conductivity with allowance for heat transfer by both phonons and “diffuse” modes.

Positron study of negative charge states in order-disorder ferroelectrics

Energy Technology Data Exchange (ETDEWEB)

Troev, T.; Berovsky, K.; Peneva, S. [Bulgarian Academy of Sciences, Sofia (Bulgaria). Inst. for Nuclear Research and Nuclear Energy

2001-07-01

The positive positron charge opens the possibility for determining the changes in charge states in technologically important order-disorder ferroelectrics. Here we show that dipole polarization disordering within domains affects the positron annihilation mechanism. The positron lifetime parameters in triglycine sulphate (TGS) (NH{sub 3}CH{sub 2}COOH){sub 3}H{sub 2}SO{sub 4}, Rochelle salt (RS) NaKC{sub 4}H{sub 4}O{sub 6}.4H{sub 2}O and Potassium dihydrogen phosphate (KDP) KH{sub 2}PO{sub 4}, at different temperatures and gamma-irradiation doses depend on the charge point defects. The increase of the positron long lifetime component {tau}{sub 2} is proportional to the temperature and gamma-irradiation dose. In gamma irradiated TGS positrons are trapped in defect electron states of oxigen ions of two radicals CH{sub 2}COO{sup -} and NH{sub 3}CHCOO{sup -}. In RS positrons are trapped also in defect electron states of oxygen ions and OH groups. (orig.)

Mikrobiološka kvaliteta i biokemijske promjene u svježem, mekanom kiselom siru Xinotyri, pripravljenom od svježeg ili pasteriziranog kozjeg mlijeka

OpenAIRE

Pappa, Eleni C.; Bontinis, Thomas G.; Tasioula-Margari, Maria; Samelis, John

2017-01-01

U radu su ispitani sljedeći parametri: mikrobiološka kakvoća, promjene u glavnim fizikalno-kemijskim značajkama i tijeku proteolize i lipolize te udjelu hlapljivih sastojaka u mekanom siru Xinotyri, tradicionalnom grčkom kiselom siru (pH vrijednosti od približno 4,4; udjela vlage od 65 % i udjela soli od 1 %), pripravljenom od svježeg ili pasteriziranog kozjeg mlijeka bez dodatka starter-kultura, i to tijekom 60 dana aerobnog skladištenja pri 4 °C. Nisu pronađene statistički bitne razlike u u...

Long-term corrosion behavior of ODS-Eurofer in flowing Pb-15.7Li at 550°C

Directory of Open Access Journals (Sweden)

W. Krauss

2016-12-01

In this paper results from long-term corrosion testing of ODS-Eurofer will be reported for exposure times up to 1.5 years at a flow velocity of 0.1m/s. The evaluated data for ODS-Eurofer corrosion will be compared with values of ‘single’ phase ’classical‘ Eurofer. The observed corrosion attack and mechanisms will be discussed in detail considering the testing conditions and the microstructure of the RAFM-steels.

Order-disorder phase transitions in Au-Cu nanocubes: from nano-thermodynamics to synthesis.

Science.gov (United States)

Mendoza-Cruz, R; Bazán-Diaz, L; Velázquez-Salazar, J J; Samaniego-Benitez, J E; Ascencio-Aguirre, F M; Herrera-Becerra, R; José-Yacamán, M; Guisbiers, G

2017-07-13

Catalysts have been widely used in industries and can be optimized by tuning the composition and chemical ordering of the elements involved in the nano-alloy. Among bi-metallic alloys, the Au-Cu system is of particular interest because it exhibits ordered phases at low temperatures. Nevertheless, the temperature at which these ordered structures are formed is totally unknown at the nanoscale. Consequently, to speed up the development of these catalysts, this paper theoretically predicts the structural phase transitions between ordered and disordered phases for the Au-Cu system by using nano-thermodynamics. Following the predictions, the suggested annealing temperatures have been carefully chosen and consequently, Au-Cu ordered nanocubes have been successfully synthesized through a solventless protocol. The results are fully supported by electron microscopy observations.

Order-disorder in ferroelectric PbZr1-xTixO3 system base solid solutions

International Nuclear Information System (INIS)

Redichkina, N.B.; Kupriyanov, M.F.; Dudek, Yu.; Abdulvakhidov, K.G.

1995-01-01

Effect of close order in PbZr 1-x Tr x O 3 system is studied by roentgen infraction method. It is shown that possible effects of crystal-chemical order-disorder shoved be accounted for by analysis of dependence of physical properties on real structural state parameters. Refs. 17, fig. 1

Tensile behavior of EUROFER ODS steel after neutron irradiation up to 16.3 dpa between 250 and 450 °C

International Nuclear Information System (INIS)

Materna-Morris, Edeltraud; Lindau, Rainer; Schneider, Hans-Christian; Möslang, Anton

2015-01-01

Highlights: • The first 9%CrWVTa steel (0.5% Y_2O_3), EUROFER ODS HIP, have been neutron irradiated up to 16.3 dpa, between 250 and 450 °C, in the High Flux Reactor (HFR). • After post-irradiation tensile tests, there was not any increase of the upper yield strength or strain localization after irradiation which is typical of RAFM steels. • Initially higher yield strength, R_p_0_._2, and distinctive tensile strength, R_m, of EUROFER ODS HIP compared to EUROFER97 steel. • These values increased due to the neutron irradiation at lower irradiation temperatures. - Abstract: During the development of structural material for future fusion reactors, a 50 kg heat of reduced-activation ferritic-martensitic 9%CrWVTa steel with nanoscaled Y_2O_3-particles, EUROFER97 ODS HIP, was produced using powder metallurgy fabrication technology. This first batch of EUROFER97 ODS HIP and, for comparison, the steel EUROFER97 were prepared for a post-irradiation tensile test program. During neutron irradiation in the HFR (High Flux Reactor, The Netherlands), an accumulated dose of up to 16.3 dpa was reached for 771 days at full power, with the irradiation temperature ranging between 250 and 450 °C. During the post-examinations, all specimens showed the highest tensile strength at lower irradiation temperatures between 250 and 350 °C. However, ODS-alloy and steel were found to clearly differ in the mechanical behavior, which could be documented by fully instrumented tensile tests. In the un-irradiated state, tensile strength of the ODS-alloy already was increased considerably by about 60% compared to the steel. Strengthening was further increased by another 20% after neutron irradiation, but with a much better ductility than observed in the steel. The typical irradiation-induced strain localization of EUROFER97 or RAFM steels could not be observed in the EUROFER97 ODS HIP alloy.

Contribution to automatic handwritten characters recognition. Application to optical moving characters recognition

International Nuclear Information System (INIS)

Gokana, Denis

1986-01-01

This paper describes a research work on computer aided vision relating to the design of a vision system which can recognize isolated handwritten characters written on a mobile support. We use a technique which consists in analyzing information contained in the contours of the polygon circumscribed to the character's shape. These contours are segmented and labelled to give a new set of features constituted by: - right and left 'profiles', - topological and algebraic unvarying properties. A new method of character's recognition induced from this representation based on a multilevel hierarchical technique is then described. In the primary level, we use a fuzzy classification with dynamic programming technique using 'profiles'. The other levels adjust the recognition by using topological and algebraic unvarying properties. Several results are presented and an accuracy of 99 pc was reached for handwritten numeral characters, thereby attesting the robustness of our algorithm. (author) [fr

Robust IFE Based Order Analysis of Rotating Machinery in Virtual Instrument

International Nuclear Information System (INIS)

Guo, Y; Chi, Y L; Huang, Y Y; Qin, S R

2006-01-01

Character analysis plays an important role in fault-find and diagnosis of rotating machinery. Order analysis is one of the major methods in character analysis for the analysis of non-stationary vibration signals in run-up or coast down of rotating machinery. An order analysis method, which employs instantaneous frequency estimation based on time-frequency analysis, is introduced. In contrast with traditional order analysis methods, this method avoids the use of tachometer and other special hardware; hence it makes the application of order analysis simplified. The order analysis introduced in the paper with the character that only software is depended for order tracking makes it specially satisfy the requirement of Virtual Instruments. Corresponding order analysis items, such as order spectrum, order spectrum matrix and tracking order spectrum etc., which are applied in Virtual Instruments, are also introduced. A test example is provided to demonstrate the validity of the method presented

Present development status of EUROFER and ODS-EUROFER for application in blanket concepts

Energy Technology Data Exchange (ETDEWEB)

Lindau, R. [Forschungszentrum Karlsruhe, Institute for Materials Research I, P.O. Box 3640, 76021 Karlsruhe (Germany)]. E-mail: rainer.lindau@imf.fzk.de; Moeslang, A. [Forschungszentrum Karlsruhe, Institute for Materials Research I, P.O. Box 3640, 76021 Karlsruhe (Germany); Rieth, M. [Forschungszentrum Karlsruhe, Institute for Materials Research I, P.O. Box 3640, 76021 Karlsruhe (Germany); Klimiankou, M. [Forschungszentrum Karlsruhe, Institute for Materials Research I, P.O. Box 3640, 76021 Karlsruhe (Germany); Materna-Morris, E. [Forschungszentrum Karlsruhe, Institute for Materials Research I, P.O. Box 3640, 76021 Karlsruhe (Germany); Alamo, A. [CEA-Saclay, SRMA/SMPX, 91191 Gif-sur-Yvette Cedex (France); Tavassoli, A.-A. F. [CEA-Saclay, SRMA/SMPX, 91191 Gif-sur-Yvette Cedex (France); Cayron, C. [CEA-Grenoble, DRT/DTEN/SMP/LS2M, 17, rue des Martyrs, 38054 Grenoble Cedex 9 (France); Lancha, A.-M. [CIEMAT, Avda. Complutense no. 22, 28040 Madrid (Spain); Fernandez, P. [CIEMAT, Avda. Complutense no. 22, 28040 Madrid (Spain); Baluc, N. [CRPP-EPFL, 5232 Villigen PSI (Switzerland); Schaeublin, R. [CRPP-EPFL, 5232 Villigen PSI (Switzerland); Diegele, E. [EFDA Close Support Unit, Boltzmannstr. 2, 85748 Garching (Germany); Filacchioni, G. [ENEA CR Casaccia, Via Anguillarese 301, 00100 S. Maria di Galeria, Rome (Italy); Rensman, J.W. [NRG, MM and I, Westerduinweg 3, P.O. Box 25, 1755 ZG Petten (Netherlands); Schaaf, B. van der [NRG, MM and I, Westerduinweg 3, P.O. Box 25, 1755 ZG Petten (Netherlands); Lucon, E. [SCK-CEN, Boeretang 200, 2400 Mol (Belgium); Dietz, W. [MECS, Schoenenborner Weg 15, 51789 Lindlar (Germany)

2005-11-15

Within the European Union, the two major breeding blanket concepts presently being developed are the helium cooled pebble bed (HCPB), and the helium cooled lithium lead (HCLL) blankets. For both concepts, different conceptual designs are being discussed with temperature windows in the range 250-550 deg. C for conservative approaches based on reduced activation ferritic-martensitic (RAFM) steels, and in the range 250-650 deg. C for more advanced versions, taking into account oxide dispersion strengthened (ODS) steels. As a final result of a systematic development of RAFM-steels in Europe, the 9% CrWVTa alloy EUROFER was specified and produced in an industrial scale with a variety of product forms. A large characterisation program is being performed including irradiation in materials test reactors between 60 and 450 deg. C ({<=}15 dpa), and in a fast breeder reactor at 330 deg. C up to 30 dpa. EUROFER is resistant to high temperature ageing, and the existing creep-rupture data ({approx}30,000 h, 450-600 deg. C) indicate long-term stability and predictability. The ODS variant of EUROFER shows superior tensile and creep properties compared to EUROFER. Applying a new production route has diminished the problem of lower ductility and inferior impact properties. A reliable joining technique for ODS and RAFM steels employing diffusion welding was successfully developed.

Helium behavior in oxide dispersion strengthened (ODS) steel: Insights from ab initio modeling

Science.gov (United States)

Sun, Dan; Li, Ruihuan; Ding, Jianhua; Huang, Shaosong; Zhang, Pengbo; Lu, Zheng; Zhao, Jijun

2018-02-01

Using first-principles calculations, we systemically investigate the energetics and stability behavior of helium (He) atoms and small Hen (n = 2-4) clusters inside oxide dispersion strengthened (ODS) steel, as well as the incorporation of large amount of He atoms inside Y2O3 crystal. From the energetic point of view, He atom inside Y2O3 cluster is most stable, followed by the interstitial sites at the α-Fe/Y2O3 interface, and the tetrahedral interstitial sites inside α-Fe region. We further consider Hen (n = 2-4) clusters at the tetrahedral interstitial site surrounded by four Y atoms, which is the most stable site in the ODS steel model. The incorporation energies of all these Hen clusters are lower than that of single He atom in α-Fe, while the binding energy between two He atoms is relatively small. With insertion of 15 He atoms into 80-atom unit cell of Y2O3 crystal, the incorporation energy of He atoms is still lower than that of He4 cluster in α-Fe crystal. These theoretical results suggest that He atoms tend to aggregate inside Y2O3 clusters or at the α-Fe/Y2O3 interface, which is beneficial to prevent the He embrittlement in ODS steels.

High resolution spectroscopy in the second excited torsional state of $CH_{3}/OD$ and the atlas of the Fourier transform spectrum in the range 20-205 cm$^{-1}/$...

CERN Document Server

Mukhopadhyay, I

1999-01-01

In this work, the reduced eighth order Hamiltonian that has been used for the determination of the molecular parameters-using the high resolution Fourier transform far-infrared (FIR) assigned transitions in the ground and first $9 excited torsional states of CH/sub 3/OD-has been applied to assign and refine the model for the second excited torsional state. The data set consisted of 1220 FIR transitions with the rotational angular momentum J<21 and K<7 in the $9 second excited torsional state. It should be noted that the second excited torsional states of methanol are almost at the top of the torsional barrier. Thus it was interesting to see how the large amplitude motion is taken care of by $9 the eighth order Hamiltonian. We are in the process of a global fit including all the assigned transitions up to the second excited state. Additionally, in this paper we present the detailed Fourier transform spectral map of CH/sub $9 3/OD in the range 20-205 cm/sup -1/, as was done for the parent species. This sp...

Evolution of oxide nanoparticles during dynamic plastic deformation of ODS steel

DEFF Research Database (Denmark)

Zhang, Zhenbo; Mishin, Oleg; Tao, Nairong

2014-01-01

The microstructure as well as the deformation behavior of oxide nanoparticles has been analyzed in the ferritic ODS steel PM2000 after compression by dynamic plastic deformation (DPD) to different strains. A dislocation cell structure forms after deformation to a strain of 1.0. DPD to a strain of 2...

Order-disorder transformations in the Σ3 (111)/[110] symmetrical tilt boundary in tungsten

International Nuclear Information System (INIS)

Wang, G.J.; Vitek, V.

1996-01-01

The structure of the Σ3 (111)/[110] symmetrical tilt boundary in tungsten was modeled by molecular statics using Finnis-Sinclair type many body potentials. Several multiple structures have been found which are composed of two types of structural units and the interaction energy between these units is negative. Hence, order-disorder structural transitions may occur in the boundary with structures being ordered and/or disordered mixtures of the two units. the transition temperature is found to be 1,158 K if only the internal energy and configurational entropy are included when evaluating the free energy. However, the transition temperature is 782 K if the vibrational entropy is also incorporated. This demonstrates that the vibrational contribution to the entropy may be as important as the configurational contribution when considering the interfacial transformations

Annealing effect on the microstructure and magnetic properties of 14%Cr-ODS ferritic steel

International Nuclear Information System (INIS)

Ding, H.L.; Gao, R.; Zhang, T.; Wang, X.P.; Fang, Q.F.; Liu, C.S.

2015-01-01

Graphical abstract: TEM images of microstructure for 14%Cr-ODS ferritic steel annealed for 2 h at different temperatures: (a) 600 °C, (b) 800 °C, (c) 950 °C, and (d) 1150 °C, and the evolution trends of coercivity field (H_C) and Vickers microhardness for samples annealed at above temperatures for 2 h and 50 h. - Highlights: • The thermal stability of annealed 14%Cr-ODS ferritic steel was investigated. • The particle size keeps fairly constant with increasing annealing temperature. • The grain size is still 2–4 μm even after annealing for 50 h at 1150 °C. • The hardness and H_C are almost unchanged after annealing from 800 °C to 1150 °C. - Abstract: The microstructure and magnetic properties of the 14%Cr oxide dispersion strengthened (ODS) ferritic steel fabricated by sol–gel and HIP method were investigated by annealing in vacuum for 2 h (at 300, 600, 800, 950 and 1150 °C) and 50 h (at 600, 800, 950 and 1150 °C). Microstructure analysis shows that as the annealing temperature increases, the size of oxide nanoparticles becomes smaller and their dispersion in matrix becomes more homogeneous. Grain size remains stable when the annealing temperature is below 800 °C, while above 800 °C, grain size grows with the increasing annealing temperature and time. The Vickers microhardness and coercivity (H_C) display almost similar evolution trend with annealing temperature for 2 h and 50 h. No obvious recrystallization appears after 1150 °C annealing, which indicates the high microstructural stability of 14%Cr-ODS ferritic steel. The possible mechanism for above behaviors is discussed in this paper.

2nd Gen FeCrAl ODS Alloy Development For Accident-Tolerant Fuel Cladding

Energy Technology Data Exchange (ETDEWEB)

Dryepondt, Sebastien N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Massey, Caleb P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Edmondson, Philip D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-08-01

Extensive research at ORNL aims at developing advanced low-Cr high strength FeCrAl alloys for accident tolerant fuel cladding. One task focuses on the fabrication of new low Cr oxide dispersion strengthened (ODS) FeCrAl alloys. The first Fe-12Cr-5Al+Y₂O₃ (+ ZrO₂ or TiO₂) ODS alloys exhibited excellent tensile strength up to 800 C and good oxidation resistance in steam up to 1400 C, but very limited plastic deformation at temperature ranging from room to 800 C. To improve alloy ductility, several fabrication parameters were considered. New Fe-10-12Cr-6Al gas-atomized powders containing 0.15 to 0.5wt% Zr were procured and ball milled for 10h, 20h or 40h with Y2O3. The resulting powder was then extruded at temperature ranging from 900 to 1050 C. Decreasing the ball milling time or increasing the extrusion temperature changed the alloy grain size leading to lower strength but enhanced ductility. Small variations of the Cr, Zr, O and N content did not seem to significantly impact the alloy tensile properties, and, overall, the 2nd gen ODS FeCrAl alloys showed significantly better ductility than the 1st gen alloys. Tube fabrication needed for fuel cladding will require cold or warm working associated with softening heat treatments, work was therefore initiated to assess the effect of these fabrications steps on the alloy microstructure and properties. This report has been submitted as fulfillment of milestone M3FT 16OR020202091 titled, Report on 2nd Gen FeCrAl ODS Alloy Development for the Department of Energy Office of Nuclear Energy, Advanced Fuel Campaign of the Fuel Cycle R&D program.

Atom probe characterization of nano-scaled features in irradiated Eurofer and ODS Eurofer steel

International Nuclear Information System (INIS)

Rogozkin, S.; Aleev, A.; Nikitin, A.; Zaluzhnyi, A.; Vladimirov, P.; Moeslang, A.; Lindau, R.

2009-01-01

Outstanding performance of oxide dispersion strengthened (ODS) steels at high temperatures and up to high doses allowed to consider them as potential candidates for fusion and fission power plants. At the same time their mechanical parameters strongly correlate with number density of oxide particles and their size. It is believed that fine particles are formed at the last stage of sophisticated production procedures and play a crucial role in higher heat- and radiation resistance in comparison with conventional materials. However, due to their small size - only few nanometers, characterization of such objects requires considerable efforts. Recent study of ODS steel by tomographic atom probe, the most appropriate technique in this case, shown considerable stability of these particles under high temperatures and ion-irradiation. However, these results were obtained for 12/14% Cr with addition of 0.3% Y 2 O 3 and titanium which is inappropriate in case of ODS Eurofer 97 and possibility to substitute neutron by ion irradiation is still under consideration. In this work effect of neutron irradiation on nanostructure behaviour of ODS Eurofer are investigated. Irradiation was performed on research reactor BOR-60 in SSC RF RIAR (Dimitrovgrad, Russia) up to 30 dpa at 280 deg. C and 580 deg. C. Recent investigation of unirradiated state revealed high number density of nano-scaled features (nano-clusters) even without addition of Ti in steel. It was shown that vanadium played significant role in nucleation process and core of nano-clusters was considerably enriched with it. In irradiated samples solution of vanadium in matrix was observed while the size of particles stayed practically unchanged. Also no nitrogen was detected in these particles in comparison with unirradiated state where bond energy of N with V was considered to be high as VN 2+ ions were detected on mass-spectra. (author)

ANALYSIS OF THE INTERACTIONS BETWEEN IMMIGRANT/FOREIGN CHARACTERS AND NATIONAL/AUTOCHTHONOUS CHARACTERS IN SPANISH TELEVISION FICTION

Directory of Open Access Journals (Sweden)

María Marcos Ramos

2014-10-01

Full Text Available In this paper we present the results of an empirical research in which it were analysed the interactions between immigrants and national characters in a sample of Spanish television fictional programs broadcasted on prime time. This study is a content analysis of 282 interactions between immigrant/foreign and national characters. Thus, it was found that the largest number of relationships between the characters involved was produced in a working context. Moreover, there was a higher proportion of the use of aggressive humour from the national characters to the immigrant/foreigners than in the reverse way. It was also observed that the immigrant/foreigner characters hardly spoke about their feelings, nor were heard by the nationals when they did it, although there were a high number of interactions in which immigrant characters were expressing their opinions and these were attended by national characters. The analysis of the interactions between immigrant and national characters in television fiction is a very important research issue, because it has been proposed that the parasocial interactions are complementary of the interpersonal interactions taking place in daily life (Müller, 2009; Park, 2012.

THE NEED FOR CHARACTER EDUCATION

Directory of Open Access Journals (Sweden)

Aynur Pala

2011-07-01

Full Text Available Character education is a national movement creatingschools that foster ethical,responsible and caring young people by modelling and teaching good characterthrough emphasis on universal values that we all share. It is the intentional,proactive effort by schools, districts and states to instil in their students importantcore ethical values such as caring, honesty, fairness, responsibility and respect forself and others.Good character is not formed automatically; it is developed over time through asustained process of teaching, example, learning and practice. It is developedthrough character education. The intentional teaching of good character isparticularly important in today’s society since ouryouth face many opportunitiesand dangers unknown to earlier generations. They are bombarded with many morenegative influences through the media and other external sources prevalent intoday’s culture. Since children spend about 900 hours a year in school, it isessential that schools resume a proactive role in assisting families andcommunities by developing caring, respectful environments where students learncore, ethical values. When a comprehensive approachto character education isused, a positive moral culture is created in the school—a total school environmentthat supports the values taught in the classroom (Character Education Partnership,2010.The aim of this study is to provide guidelines forthe elements need for effectiveand comprehensive character education. And to emphasize the need of charactereducation to help students develop good character, which includes knowing,caring about and acting upon core ethical values such as respect, responsibility,honesty, fairness and compassion.

European Society for Swallowing Disorders – European Union Geriatric Medicine Society white paper: oropharyngeal dysphagia as a geriatric syndrome

Science.gov (United States)

Baijens, Laura WJ; Clavé, Pere; Cras, Patrick; Ekberg, Olle; Forster, Alexandre; Kolb, Gerald F; Leners, Jean-Claude; Masiero, Stefano; Mateos-Nozal, Jesús; Ortega, Omar; Smithard, David G; Speyer, Renée; Walshe, Margaret

2016-01-01

This position document has been developed by the Dysphagia Working Group, a committee of members from the European Society for Swallowing Disorders and the European Union Geriatric Medicine Society, and invited experts. It consists of 12 sections that cover all aspects of clinical management of oropharyngeal dysphagia (OD) related to geriatric medicine and discusses prevalence, quality of life, and legal and ethical issues, as well as health economics and social burden. OD constitutes impaired or uncomfortable transit of food or liquids from the oral cavity to the esophagus, and it is included in the World Health Organization’s classification of diseases. It can cause severe complications such as malnutrition, dehydration, respiratory infections, aspiration pneumonia, and increased readmissions, institutionalization, and morbimortality. OD is a prevalent and serious problem among all phenotypes of older patients as oropharyngeal swallow response is impaired in older people and can cause aspiration. Despite its prevalence and severity, OD is still underdiagnosed and untreated in many medical centers. There are several validated clinical and instrumental methods (videofluoroscopy and fiberoptic endoscopic evaluation of swallowing) to diagnose OD, and treatment is mainly based on compensatory measures, although new treatments to stimulate the oropharyngeal swallow response are under research. OD matches the definition of a geriatric syndrome as it is highly prevalent among older people, is caused by multiple factors, is associated with several comorbidities and poor prognosis, and needs a multidimensional approach to be treated. OD should be given more importance and attention and thus be included in all standard screening protocols, treated, and regularly monitored to prevent its main complications. More research is needed to develop and standardize new treatments and management protocols for older patients with OD, which is a challenging mission for our societies

Surface Modification Technology of ODS Alloying Treatment by using Laser Heat Source

International Nuclear Information System (INIS)

Kim, H. G.; Kim, I. H.; Choi, B. K.; Park, J. Y.; Koo, Y. H.

2012-01-01

The ODS (Oxide Dispersion Strengthed) alloys can be applied as structural materials for components in the core of a nuclear power plants since these components must have a high mechanical strength at high temperature up to 700 .deg. C. This type of alloy was generally manufactured by mechanical alloying from its source metal and Y 2 O 3 powders. The mechanical alloyed powder is subjected to the HIP (Hot Isotatic Pressing) or hot extrusion: and this product is heat treated at target temperature and time. Thus, the Y 2 O 3 particles are dispersed in the metal matrix. These manufacturing process of ODS alloy is very complex and expensive. Also, it is necessary the special techniques to obtain the uniform dispersion and volume control of Y 2 O 3 particles. Another problem is the final product forming such as tube and sheet because the intermediated-product has a high mechanical strength due to the dispersion of Y 2 O 3 particles. The laser cladding techniques was applied on the surface cladding of ceramics and inter-metallic compounds on metal base and ceramic base components to increase corrosion and wear resistance. The laser heat source can be used to the alloying the metal and ceramic materials, because thermally melting of metal and ceramic is possible. So, we are applied on ODS alloy manufacturing by using the laser heat source. The main advantages and disadvantage of this technology can be resumed as follows: · It is possible to apply to the sheet and tube shape component, directly. · Metallurgical damage such as HAZ and severe grain growth is considerably reduced. · Good control of the alloying element of the treated zone · Highly reproducible homogeneous zone · The pores and cracks are suppressed in the treated zone · Oxidation can be prevented during the process. · Good control is possible for the irregular shaped components. · The bulk material alloying is limited by the power of laser source. So, this work is studied on the ODS alloy manufacturing

Maya Studio Projects Photorealistic Characters

CERN Document Server

Palamar, Todd

2011-01-01

Create realistic characters with Maya tools and this project-based book Maya character generation tools are extremely sophisticated, and there's no better way to learn all their capabilities than by working through the projects in this hands-on book. This official guide focuses on understanding and implementing Maya's powerful tools for creating realistic characters for film, games, and TV. Use a variety of tools to create characters from skeleton to clothing, including hairstyles and facial hair, and learn how to use Performance Capture. A DVD includes supplementary videos, project support fi

Diffusion bonding of 9Cr ODS ferritic/martensitic steel with a phase transformation

Energy Technology Data Exchange (ETDEWEB)

Noh, Sanghoon, E-mail: shnoh@kaeri.re.kr [Nuclear Materials Division, Korea Atomic Energy Research Institute, Yuseong-gu, Daejeon (Korea, Republic of); Kimura, Akihiko [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto (Japan); Kim, Tae Kyu [Nuclear Materials Division, Korea Atomic Energy Research Institute, Yuseong-gu, Daejeon (Korea, Republic of)

2014-10-15

Highlights: • Diffusion bonding was employed to join 9Cr oxide dispersion strengthened ferritic/martensitic steel under uniaxial hydrostatic pressure, and the microstructure and tensile properties of the joints were investigated. • ODS steel was successfully diffusion bonded at an austenization temperature to migrate a residual diffusion bonding interface. • The tensile properties of the joint region were comparable with that of the base metal with a ductile fracture occurred far from the bonding interface. • It is considered that diffusion bonding with a phase transformation can be a very useful joining method for fabricating components in next-generation nuclear systems using 9Cr ODS ferritic/martensitic steel. - Abstract: Diffusion bonding was employed to join oxide-dispersion-strengthened ferritic/martensitic steel under uniaxial hydrostatic pressure using a high vacuum hot press, and the microstructure and tensile properties of the joints were investigated. 9Cr oxide dispersion strengthened (ODS) steel was successfully diffusion bonded at 1150 °C for 1 h to migrate a residual bonding interface. Following heat treatment, including normalising at 1050 °C and tempering at 800 °C for 1 h, comparable results without inclusions or micro-voids at the bonding interface, or degradation in the base metal were achieved. Transmission electron microscopy (TEM) observation revealed that the nano-oxide particles in the bonding region were uniformly distributed in the matrix. At room temperature, the joint had nearly the same tensile properties with that of the base metal. The tensile strength of the joint region at elevated temperatures was comparable with that of the base metal. The total elongation of the joint region decreased slightly, but reached 80% of the base metal at 700 °C, and a ductile fracture occurred far from the bonding interface. Therefore, it is considered that diffusion bonding with a phase transformation can be a very useful joining method for

Nanocluster irradiation evolution in Fe-9%Cr ODS and ferritic-martensitic alloys

Science.gov (United States)

Swenson, M. J.; Wharry, J. P.

2017-12-01

The objective of this study is to evaluate the influence of dose rate and cascade morphology on nanocluster evolution in a model Fe-9%Cr oxide dispersion strengthened steel and the commercial ferritic/martensitic (F/M) alloys HCM12A and HT9. We present a large, systematic data set spanning the three alloys, three irradiating particle types, four orders of magnitude in dose rate, and doses ranging 1-100 displacements per atom over 400-500 °C. Nanoclusters are characterized using atom probe tomography. ODS oxide nanoclusters experience partial dissolution after irradiation due to inverse Ostwald ripening, while F/M nanoclusters undergo Ostwald ripening. Damage cascade morphology is indicative of nanocluster number density evolution. Finally, the effects of dose rate on nanocluster morphology provide evidence for a temperature dilation theory, which purports that a negative temperature shift is necessary for higher dose rate irradiations to emulate nanocluster evolution in lower dose rate irradiations.

Effect of yttrium addition on the microstructure and mechanical properties of ODS RAF steels

International Nuclear Information System (INIS)

Auger, M.A.; Castro, V. de; Leguey, T.; Tarcísio-Costa, J.; Monge, M.A.; Muñoz, A.; Pareja, R.

2014-01-01

An oxide dispersion strengthened (ODS) alloy with nominal composition Fe–14Cr–2W–0.3Ti–0.24Y (wt.%) was produced by mechanical alloying using elemental powders, and subsequent hot isostatic pressing. The microstructure of the material and characteristics of the oxide particle dispersion were investigated by electron microscopy. The effect of heat treatments on the microhardness and tensile properties at room temperature was also studied. The results show that a fine dispersion of Y–O-rich nanoparticles is achieved, together with larger (Cr, Ti)-rich precipitates. The absence of Ti is apparent in the majority of these nanoparticles, in contrast with reported results for ODS Ti-modified steels processed with Y 2 O 3 addition

Holistic Processing of Chinese Characters

Directory of Open Access Journals (Sweden)

Alan Chun-Nang Wong

2011-05-01

Full Text Available Enhanced holistic processing (obligatory attention to all parts of an object has been associated with different types of perceptual expertise involving faces, cars, fingerprints, musical notes, English words, etc. Curiously Chinese characters are regarded as an exception, as indicated by the lack of holistic processing found for experts (Hsiao and Cottrell, 2009. The ceiling performance of experts, however, may have caused this null effect. We revisit this issue by adopting the often-used face-composite sequential-matching task to two-part Chinese characters. Participants matched the target halves (left or right of two characters while ignoring the irrelevant halves. Both Chinese readers (experts and non-Chinese readers (novices showed holistic processing. Follow-up experiments suggested different origins of the effects for the two groups. For experts, holistic processing was sensitive to the amount of experience with the characters, as it was larger for words than non-words (formed by swapping the two parts of a valid character. Novices, however, showed similar degree of holistic processing to words and non-words, suggesting that their effects were more related to their inefficient decomposition of a complex, character-like pattern into parts. Overall these findings suggest that holistic processing may be a marker of expertise with Chinese characters, contrary to previous claims.

Temperature optimization for the separation of PAHs on micropacked LC ODS columns

NARCIS (Netherlands)

Chen, J.; Steenackers, D.; Sandra, P.J.F.; Sandra, P.J.F.; Devos, G.

1993-01-01

The effect of column temperature on the separation of the sixteen polycyclic aromatic hydrocarbons (PAHs) of mixture SRM 1647a of the US Environmental Protection Agency has been studied on different micropacked ODS columns. lsothermal temperature optimization was successfully applied for complete

Temperature optimization for the separation of PAHs on micropacked LC ODS columns

NARCIS (Netherlands)

Chen, J.; Steenackers, D.; Medvedovici, A.; Sandra, P.J.F.

1993-01-01

The effect of column temperature on the separation of the sixteen polycyclic aromatic hydrocarbons (PAHs) of mixture SRM 1647a of the US Environmental Protection Agency has been studied on different micropacked ODS columns. Isothermal temperature optimization was successfully used for complete

Temperature-dependent vibrational spectroscopy to study order-disorder transitions in charge transfer complexes

Science.gov (United States)

Isaac, Rohan; Goetz, Katelyn P.; Roberts, Drew; Jurchescu, Oana D.; McNeil, L. E.

2018-02-01

Charge-transfer (CT) complexes are a promising class of materials for the semiconductor industry because of their versatile properties. This class of compounds shows a variety of phase transitions, which are of interest because of their potential impact on the electronic characteristics. Here temperature-dependent vibrational spectroscopy is used to study structural phase transitions in a set of organic CT complexes. Splitting and broadening of infrared-active phonons in the complex formed between pyrene and pyromellitic dianhydride (PMDA) confirm the structural transition is of the order-disorder type and complement previous x-ray diffraction (XRD) results. We show that this technique is a powerful tool to characterize transitions, and apply it to a range of binary CT complexes composed of polyaromatic hyrdocarbons (anthracene, perylene, phenanthrene, pyrene, and stilbene) and PMDA. We extend the understanding of transitions in perylene-PMDA and pyrene-PMDA, and show that there are no order-disorder transitions present in anthracene-PMDA, stilbene-PMDA and phenanthrene-PMDA in the temperature range investigated here.

Linearly polarised photons at the BGO-OD experiment

Energy Technology Data Exchange (ETDEWEB)

Bella, Andreas [Physikalisches Institut, Universitaet Bonn (Germany)

2016-07-01

The BGO-OD experiment, located at the ELSA accelerator of the University of Bonn studies photoproduction reactions off the nucleon. A real, energy-tagged photon beam is produced via bremsstrahlung by exposing a thin radiator to the electron beam provided by ELSA. Linear polarisation is obtained by coherent bremsstrahlung. To do this we use a 570 μm thick diamond radiator. The degree of polarisation is obtained from the bremsstrahlung spectrum. A consistency check is performed by extracting the already well measured beam asymmetry Σ in π{sup 0} photoproduction off the proton.

The level of orally ingested vitamin C affected the expression of vitamin C transporters and vitamin C accumulation in the livers of ODS rats.

Science.gov (United States)

Sone, Yasuko; Ueta, Etsuko; Kodama, Satoru; Sannoumaru, Yasuko; Miyake, Noriko; Sone, Hirohito; Fujiwara, Yoko; Otsuka, Yuzuru; Kondo, Kazuo; Inagaki, Masahiro; Namba, Eiji; Kurata, Tadao; Suzuki, Emiko

2011-01-01

We investigated the effects of vitamin C administration on vitamin C-specific transporters in ODS/ShiJcl-od/od rat livers. The vitamin C-specific transporter levels increased in the livers of the rats not administered vitamin C and decreased in the livers of those administered vitamin C at 100 mg/d, indicating that these transporter levels can be influenced by the amount of vitamin C administered.

Sensory processing disorders – diagnostic and therapeutic controversies

Directory of Open Access Journals (Sweden)

Aneta R. Borkowska

2017-09-01

Full Text Available This article presents the current state of knowledge regarding the controversial issue of sensory integration dysfunction/sensory processing disorder. Symptoms are defined as impairments in the accurate reception and registering of stimuli, differentiation of stimulus intensity, and adequate reactivity to stimulation. They can be of specific character and occur in isolation and can also be a nonspecific element of a clinical picture of another disease entity. Psychophysiological and neuroimaging studies confirm the existence of both a distinct group of children with symptoms of sensory processing disorder diagnosed based on descriptions of behaviours listed in questionnaires and of a specific neurobiological basis of this disorder. In clinical practice, it is of key importance to determine whether behavioural problems observed in children are caused by disorders other than sensory processing disorders. Results of meta-analyses regarding sensory integration therapy are inconclusive and do not allow this form of treatment to be considered fact-based. Future studies with high methodological standards are necessary in order to verify the effectiveness of different forms of sensory integration therapy. Parents should be informed about the existing limitations.

Influence of HIP pressure on tensile properties of a 14Cr ODS ferritic steel

Energy Technology Data Exchange (ETDEWEB)

Oksiuta, Z., E-mail: z.oksiuta@pb.edu.pl [Bialystok Technical University, Mechanical Department, Wiejska 45c, 15-351 Bialystok (Poland); Ozieblo, A.; Perkowski, K.; Osuchowski, M. [Institute of Ceramics and Building Materials, Postępu 9, 02-676 Warsaw (Poland); Lewandowska, M. [Warsaw University of Technology, Woloska 141, 02-504 Warsaw (Poland)

2014-02-15

Highlights: • The HIPping parameters of the 14Cr–2W–0.3Ti–0.3Y{sub 2}O{sub 3} ODS steel powder were investigated. • The density and microstructure of the tested specimens after HIPping were studied. • The mechanical properties, high temperature tensile tests, were performed. • Residual porosity was observed in all tested specimens. • HIPping pressure has negligible influence on the strength of the ODS steel however improves material ductility. - Abstract: An oxide dispersion strengthened ferritic steel with a nominal composition of Fe–14Cr–2W–0.3Ti–0.3Y{sub 2}O{sub 3} (in wt.%) was consolidated by hot isostatic pressing at 1150 °C under various pressures in the range of 185–300 MPa for 3 h. The microstructure, microhardness and high temperature tensile properties of the steel were investigated. With increasing compaction pressure the density of specimens also increased, however OM and SEM observations revealed residual porosity in all tested specimens and similar ferritic microstructure with bimodal-like grains and numerous of large oxide particles, located at the grain boundaries. Mechanical testing revealed that compaction pressure has negligible influence on the hardness and tensile strength of the ODS steel, however improves the material ductility.

Influence of HIP pressure on tensile properties of a 14Cr ODS ferritic steel

International Nuclear Information System (INIS)

Oksiuta, Z.; Ozieblo, A.; Perkowski, K.; Osuchowski, M.; Lewandowska, M.

2014-01-01

Highlights: • The HIPping parameters of the 14Cr–2W–0.3Ti–0.3Y 2 O 3 ODS steel powder were investigated. • The density and microstructure of the tested specimens after HIPping were studied. • The mechanical properties, high temperature tensile tests, were performed. • Residual porosity was observed in all tested specimens. • HIPping pressure has negligible influence on the strength of the ODS steel however improves material ductility. - Abstract: An oxide dispersion strengthened ferritic steel with a nominal composition of Fe–14Cr–2W–0.3Ti–0.3Y 2 O 3 (in wt.%) was consolidated by hot isostatic pressing at 1150 °C under various pressures in the range of 185–300 MPa for 3 h. The microstructure, microhardness and high temperature tensile properties of the steel were investigated. With increasing compaction pressure the density of specimens also increased, however OM and SEM observations revealed residual porosity in all tested specimens and similar ferritic microstructure with bimodal-like grains and numerous of large oxide particles, located at the grain boundaries. Mechanical testing revealed that compaction pressure has negligible influence on the hardness and tensile strength of the ODS steel, however improves the material ductility

RECOGNITION METHOD FOR CURSIVE JAPANESE WORD WRITTEN IN LATIN CHARACTERS

NARCIS (Netherlands)

Maruyama, K.; Nakano, Y.

2004-01-01

This paper proposes a recognition method for cursive Japanese words written in Latin characters. The method integrates multiple classifiers using duplicated can­ didates in multiple classifiers and orders of classifiers to improve the word recog­ nition rate combining their results. In experiments

The Structure of Character Strengths: Variable- and Person-Centered Approaches

Directory of Open Access Journals (Sweden)

Małgorzata Najderska

2018-02-01

Full Text Available This article examines the structure of character strengths (Peterson and Seligman, 2004 following both variable-centered and person-centered approaches. We used the International Personality Item Pool-Values in Action (IPIP-VIA questionnaire. The IPIP-VIA measures 24 character strengths and consists of 213 direct and reversed items. The present study was conducted in a heterogeneous group of N = 908 Poles (aged 18–78, M = 28.58. It was part of a validation project of a Polish version of the IPIP-VIA questionnaire. The variable-centered approach was used to examine the structure of character strengths on both the scale and item levels. The scale-level results indicated a four-factor structure that can be interpreted based on four of the five personality traits from the Big Five theory (excluding neuroticism. The item-level analysis suggested a slightly different and limited set of character strengths (17 not 24. After conducting a second-order analysis, a four-factor structure emerged, and three of the factors could be interpreted as being consistent with the scale-level factors. Three character strength profiles were found using the person-centered approach. Two of them were consistent with alpha and beta personality metatraits. The structure of character strengths can be described by using categories from the Five Factor Model of personality and metatraits. They form factors similar to some personality traits and occur in similar constellations as metatraits. The main contributions of this paper are: (1 the validation of IPIP-VIA conducted in variable-centered approach in a new research group (Poles using a different measurement instrument; (2 introducing the person-centered approach to the study of the structure of character strengths.

Electronic, elastic, thermodynamic properties and structure disorder of {gamma}-AlON solid solution from ab initio calculations

Energy Technology Data Exchange (ETDEWEB)

Wang, Yuezhong, E-mail: wyzphysics@163.com [Department of Physics and Key Laboratory for Radiation Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China); Tianjin Jinhang Institute of Technical Physics, Tianjin 300192 (China); Lu, Tiecheng, E-mail: lutiecheng@scu.edu.cn [Department of Physics and Key Laboratory for Radiation Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China); International Center for Material Physics, Chinese Academy of Sciences, Shenyang 110015 (China); Zhang, Rongshi [Tianjin Jinhang Institute of Technical Physics, Tianjin 300192 (China); Jiang, Shengli; Qi, Jianqi; Wang, Ying [Department of Physics and Key Laboratory for Radiation Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China); Chen, Qingyun [Department of Physics and Key Laboratory for Radiation Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China); National Defense Key Discipline Laboratory of Nuclear Waste and Environmental Safety, Southwest University of Science and Technology, Mianyang 621010 (China); Miao, Naihua [Physique Theorique des Materiaux, Universite de Liege, Sart Tilman B-4000 (Belgium); He, Duanwei [Institute of Atomic and Molecular Physics, Sichuan University, Chengdu 610064 (China)

2013-01-25

Highlights: Black-Right-Pointing-Pointer We reassess the chemical bonding character of {gamma}-AlON which shows strong ionicity. Black-Right-Pointing-Pointer {gamma}-AlON single-crystals exhibit highly elastic anisotropy. Black-Right-Pointing-Pointer The thermodynamic properties are investigated in a wider temperature/pressure range. Black-Right-Pointing-Pointer {gamma}-AlON is an O/N partially disordered structure. - Abstract: Spinel aluminium oxynitride ({gamma}-AlON), as a kind of transparent ceramic material expectable, is studied using the ab initio density functional method, in terms of electronic, elastic, thermodynamic properties and structure disorder. The results show that {gamma}-AlON exhibits strong ionicity, as quantitatively expressed by (Al{sub O}{sup 2.43+}){sub 15}(Al{sub T}{sup 2.41+}){sub 8}(O{sup 1.64-}){sub 27}(N{sup 2.27-}){sub 5} from our reassessment of the ionic character. We summarize and speculate that the considered oxynitride single-crystals exhibit highly elastic anisotropy. The interpretation of the thermodynamic properties of {gamma}-AlON according to quasi-harmonic Debye model confirm the available experiments and are extended to a wider temperature/pressure range. This material holds high elastic strength under extreme environments, where dB/dT absolute value is less than 0.03 GPa/K, independent of the pressure. Finally, we study the O/N structure disorder character of {gamma}-AlON solid solution by investigating nine possible crystal structures. It is found that {gamma}-AlON should be partially disordered, and in fact, the O/N ordering has a significant effect on the properties.

The Prevalence of Oropharyngeal Dysphagia in Adults Presenting with Temporomandibular Disorders Associated with Rheumatoid Arthritis: A Systematic Review and Meta-analysis.

Science.gov (United States)

Gilheaney, Órla; Zgaga, Lina; Harpur, Isolde; Sheaf, Greg; Kiefer, Liss; Béchet, Sibylle; Walshe, Margaret

2017-10-01

Temporomandibular disorders (TMDs) are the most frequent non-dental orofacial pain disorders and may be associated with rheumatoid arthritis (RA), resulting in oropharyngeal dysphagia (OD). However, clinicians' understanding of involvement with OD caused by RA-related TMDs is limited and the methodological quality of research in this field has been criticised. Therefore, the aim of this study was to systematically review the prevalence of oral preparatory and oral stage signs and symptoms of OD in adults presenting with TMDs associated with RA. A systematic review of the literature was completed. The following electronic databases were searched from inception to February 2016, with no date/language restriction: EMBASE, PubMed, CINAHL, Web of Science, Elsevier Scopus, Science Direct, AMED, The Cochrane Database of Systematic Reviews, and ProQuest Dissertations and Theses A & I. Grey literature and reference lists of the included studies were also searched. Studies reporting the frequency of OD in adults presenting with TMD and RA were included. Study eligibility and quality were assessed by three independent reviewers. Methodological quality was assessed using the Down's and Black tool. The search yielded 19 eligible studies. Typical difficulties experienced by RA patients included impaired swallowing (24.63%), impaired masticatory ability (30.69%), masticatory pain (35.58%), and masticatory fatigue (21.26%). No eligible studies reported figures relating to the prevalence of weight loss. Eligible studies were deemed on average to be of moderate quality. Study limitations included the small number of studies which met the inclusion criteria and the limited amount of studies utilising objective assessments. Valid and reliable prospective research is urgently required to address the assessment and treatment of swallowing difficulties in RA as TMJ involvement may produce signs and symptoms of OD.

Empirical tight-binding modeling of ordered and disordered semiconductor structures

International Nuclear Information System (INIS)

Mourad, Daniel

2010-01-01

In this thesis, we investigate the electronic and optical properties of pure as well as of substitutionally alloyed II-VI and III-V bulk semiconductors and corresponding semiconductor quantum dots by means of an empirical tight-binding (TB) model. In the case of the alloyed systems of the type A x B 1-x , where A and B are the pure compound semiconductor materials, we study the influence of the disorder by means of several extensions of the TB model with different levels of sophistication. Our methods range from rather simple mean-field approaches (virtual crystal approximation, VCA) over a dynamical mean-field approach (coherent potential approximation, CPA) up to calculations where substitutional disorder is incorporated on a finite ensemble of microscopically distinct configurations. In the first part of this thesis, we cover the necessary fundamentals in order to properly introduce the TB model of our choice, the effective bond-orbital model (EBOM). In this model, one s- and three p-orbitals per spin direction are localized on the sites of the underlying Bravais lattice. The matrix elements between these orbitals are treated as free parameters in order to reproduce the properties of one conduction and three valence bands per spin direction and can then be used in supercell calculations in order to model mixed bulk materials or pure as well as mixed quantum dots. Part II of this thesis deals with unalloyed systems. Here, we use the EBOM in combination with configuration interaction calculations for the investigation of the electronic and optical properties of truncated pyramidal GaN quantum dots embedded in AlN with an underlying zincblende structure. Furthermore, we develop a parametrization of the EBOM for materials with a wurtzite structure, which allows for a fit of one conduction and three valence bands per spin direction throughout the whole Brillouin zone of the hexagonal system. In Part III, we focus on the influence of alloying on the electronic and

Ten year rank-order stability of personality traits and disorders in a clinical sample

Science.gov (United States)

Hopwood, Christopher J.; Morey, Leslie C.; Donnellan, M. Brent; Samuel, Douglas B.; Grilo, Carlos M.; McGlashan, Thomas H.; Shea, M. Tracie; Zanarini, Mary C.; Gunderson, John G.; Skodol, Andrew E.

2012-01-01

Objective To compare the 10-year retest stability of normal traits, pathological traits, and personality disorder dimensions in a clinical sample. Method Ten-year rank order stability estimates for the Revised NEO Personality Inventory, Schedule for Nonadaptive and Adaptive Personality, and Diagnostic Interview for DSM-IV Personality Disorders were evaluated before and after correcting for test-retest dependability and internal consistency in a clinical sample (N = 266). Results Dependability corrected stability estimates were generally in the range of .60–.90 for traits and .25–.65 for personality disorders. Conclusions The relatively lower stability of personality disorder symptoms may indicate important differences between pathological behaviors and relatively more stable self-attributed traits and imply that a full understanding of personality and personality pathology needs to take both traits and symptoms into account. The Five-Factor Theory distinction between basic tendencies and characteristic adaptations provides a theoretical framework for the separation of traits and disorders in terms of stability in which traits reflect basic tendencies that are stable and pervasive across situations, whereas personality disorder symptoms reflect characteristic maladaptations that are a function of both basic tendencies and environmental dynamics. PMID:22812532

In-situ investigation of the order-disorder transition in Cu2ZnSnSe4 by optical transmission spectroscopy

Directory of Open Access Journals (Sweden)

Christiane Stroth

2017-02-01

Full Text Available The existence of disorder is one possible reason for the limited performance of kesterite solar cells. Therefore further knowledge of the order-disorder phase transition, of factors which influence the degree of order and of methods to determine this material property is still required. In this study we investigated the order-disorder transition in the kesterite material Cu2ZnSnSe4 by in-situ optical transmission spectroscopy during heat treatments. We show in-situ results for the temperature dependence of the band gap and its tailing properties. The influence of cooling rates on the phase transition was analyzed as well as the ordering kinetics during annealing at a constant temperature. The critical temperature of the phase transition was determined and the existence of a control temperature range is shown, which allows for controlling the degree of order by the cooling rate within this range. Additionally we performed Raman analysis to link Raman spectra to the degree of order in Cu2ZnSnSe4. A correlation between the intensity ratio of A-modes as well as B-/ E- Raman modes and the degree of order was found.

Solid-state diffusion bonding of high-Cr ODS ferritic steel

Energy Technology Data Exchange (ETDEWEB)

Noh, Sanghoon, E-mail: sh-noh@iae.kyoto-u.ac.jp [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto (Japan); Kasada, Ryuta; Kimura, Akihiko [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto (Japan)

2011-05-15

Research highlights: > Oxide dispersion strengthened ferritic steel joined by solid-state diffusion bonding. > Free of precipitates and micro-voids at the bonding interface was existed. > Joints had the same tensile properties with anisotropy of the base material. > USE of joints was fully reserved in L-R bonding orientation. > Cracks did not propagate on the bonding interface at the Charpy impact test. - Abstract: Solid-state diffusion bonding (SSDB) was employed to join high-Cr oxide dispersion strengthened (ODS) ferritic steel (Fe-15Cr-2W-0.2Ti-0.35Y{sub 2}O{sub 3}) blocks under uniaxial hydrostatic pressure using a high-vacuum hot press, and the microstructure and mechanical properties of the joints were investigated. High-Cr ODS ferritic steels were successfully diffusion bonded at 1200 deg. C for 1 h, without precipitates and microvoids at the bonding interface or degradation in the base materials. Transmission electron microscopic observation revealed that the nano-oxide particles near the bonding interface were uniformly distributed in the matrix and that the chemical composition across the bonding interface was virtually constant. At room temperature, the joint had nearly the same tensile properties and exhibited anisotropic behavior similar to that of the base material. The tensile strength of the joint region at elevated temperatures is nearly the same as that of the base material, with necking behavior at several micrometers from the bonding interface. The total elongation of the joint region decreased slightly at 700 {sup o}C, with an exfoliation fracture surface at the bonding interface. Although a small ductile-brittle transition temperature shift was observed in the joints, the upper shelf energy was fully reserved in the case of joints with L-R bonding orientation, for which cracks did not propagate on the bonding interface. Therefore, it is concluded that SSDB can be potentially employed as a joining method for high-Cr ODS ferritic steel owing to

Characterisation of high-temperature damage mechanisms of oxide dispersion strengthened (ODS) ferritic steels

International Nuclear Information System (INIS)

Salmon-Legagneur, Hubert

2017-01-01

The development of the fourth generation of nuclear power plants relies on the improvement of cladding materials, in order to achieve resistance to high temperature, stress and irradiation dose levels. Strengthening of ferritic steels through nano-oxide dispersion allows obtaining good mechanical strength at high temperature and good resistance to irradiation induced swelling. Nonetheless, studies available from open literature evidenced an unusual creep behavior of these materials: high anisotropy in time to rupture and flow behavior, low ductility and quasi-inexistent tertiary creep stage. These phenomena, and their still unclear origin are addressed in this study. Three 14Cr ODS steels rods have been studied. Their mechanical behavior is similar to those of other ODS steels from open literature. During creep tests, the specimens fractured by through crack nucleation and propagation from the lateral surfaces, followed by ductile tearing once the critical stress intensity factor was reached at the crack tip. Tensile and creep properties did not depend on the chemical environment of specimens. Crack propagation tests performed at 650 C showed a low value of the stress intensity factor necessary to start crack propagation. The cracks followed an intergranular path through the smaller-grained regions, which partly explains the anisotropy of high temperature strength. Notched specimens have been used to study the impact of the main loading parameters (deformation rate, temperature, stress triaxiality) on macroscopic crack initiation and stable propagation, from the central part of the specimens. These tests allowed revealing cavities created during high temperature loading, but unexposed to the external environment. These cavities showed a high chemical reactivity of the free surfaces in this material. The performed tests also evidenced different types of grain boundaries, which presented different damage development behaviors, probably due to differences in local

Effect of heat treatment on microstructure and hardness of Eurofer 97, Eurofer ODS and T92 steels

International Nuclear Information System (INIS)

Lu, Z.; Faulkner, R.G.; Riddle, N.; Martino, F.D.; Yang, K.

2009-01-01

Eurofer ODS steel is a potential candidate for fusion reactor application due to its excellent swelling resistance, low thermal expansion coefficient and high temperature properties. One of the main issues is that high fluence neutron irradiation induces a significant increase of ductile-to-brittle transition temperature (DBTT) at temperatures below 400 deg. C which restricts its application. The aim of this study is to explore the methods to lower the initial DBTT of Eurofer ODS steel by heat treatment optimization. Two heats of Eurofer ODS steels with different C contents are heat-treated at different normalizing temperatures, cooling rates and tempering conditions, and are compared with Eurofer 97 and T92 steels heat-treated with similar conditions. The microstructure is characterized by optical microscopy, FEG-TEM and OIM-EBSD techniques. The effect of normalization, cooling rate and temper on grain size, precipitation, grain boundary misorientation and hardness are investigated. The influences of these properties on DBTT are discussed.

Multifractal character of the electronic states in disordered two-dimensional systems

International Nuclear Information System (INIS)

Tit, N.; Schreiber, M.

1994-08-01

The nature of electronic states in disordered two-dimensional (2D) systems is investigated. To this aim, we present our calculations of both density of states and dc-conductivity for square lattices modelling the Anderson Hamiltonian with on-site energies randomly chosen from a box distribution of width W. For weak disorder (W), the eigenfunctions calculated by means of the Lanczos diagonalization algorithm display spatial fluctuations reflecting their (multi)fractal behaviour. For increasing disorder or energy the observed increase of the curdling of the wavefunction reflects its stronger localization. Our dc-conductivity results suggest a critical fractal dimension d * c =1.48±0.05 to discriminate between the exponentially and the power-law localized states. Consequences of the localization on transport properties are also discussed. (author). 30 refs, 10 figs, 1 tab

Effects of administration of beta-carotene, ascorbic acid, persimmons, and pods on antioxidative ability in UV-irradiated ODS rats.

Science.gov (United States)

Hosotani, Keisuke; Yoshida, Minoru; Kitagawa, Masahiro

2005-07-01

To evaluate the effects of supplementing diets with carotenoid and ascorbic acid (AsA) on the antioxidative ability of Osteogenic Disorder-Shionogi (ODS) rats, we added synthetic beta-carotene (betaC), AsA, and powders of persimmon (Ka) and pods (Po) containing betaC and AsA to the diet and obtained the following results. The urinary 8-hydroxydeoxyguanosine (8-OHdG) concentration was low in the -betaC.AsA and +AsA groups but high in the +betaC.AsA, +Ka, and +Po groups. The thiobarbituric acid-reactive substances (TBARS) in both the liver and skin were higher in the -betaC.AsA group than in the +betaC.AsA group and were low in the +Ka and +Po groups. As antioxidant enzymes, glutathione peroxidase (GSH-Px) activity was high in the +betaC.AsA group, low in the -beta3C.AsA group in both the skin and liver, and also high in the + Ka and +Po group in the liver. Superoxide dismutase (SOD) activity was high in the -betaC.AsA group and low in the +betaC.AsA and +Ka groups in both the skin and liver. Catalase (CAT) activity in the liver was low in the -betaC.AsA, +AsA, and +betaC groups and high in the +betaC.AsA and +Po groups. These results confirmed that the administration of betaC, AsA, and persimmons and pods increases antioxidative ability in the skin and liver of ultraviolet-b(UV-B)-irradiated ODS rats.

CHARACTER BUILDING DALAM KONSEP PENDIDIKAN IMAM ZARKASYI DITINJAU DARI FILSAFAT MORAL IBNU MISKAWAIH

Directory of Open Access Journals (Sweden)

Najwa Mu'minah

2016-08-01

Full Text Available Degradation of moral consciousness, especially in the politic and Indonesian government bureaucracy, in recent times that was pictured by various anomalies and immorality, such as a corruption, has become a negative “cultural norm”, which seem very difficult to be controlled. The condition of national spirit and morality suggested the need of redevelopment of model of character education (character building as a national healing. Imam Zarkasyi implemented several principles of character building in the Pesantren of Darussalam Gontor. He taught his pupils on the basis of the virtues of the excellences with refer to the Panca Jiwa and the Four Mottos of Modernity of the Pesantren as their living values. His reformative efforts in the context of contemporary Islamic education are actually intended to the development of character, in other words, “character building”, by implementing the principle of the Golden Mean of Ibn Miskawaih. Some aspects of Zarkasyi's principles of education that might be supportive for developing the national character education program, and still relevant for today are: firstly, moral education should have the leadership insights; secondly, moral education should have the objective moral values as the teleological purposes; thirdly, moral education should be built through the best environment, in order to be optimized and efficient; and fourthly, moral education curriculum should be integrated and comprehensive. So, the Zarkasyi's concept of character building, and the education movement became the concept of character education that quite mature and should be extracted by our nation.

Effect of yttrium addition on the microstructure and mechanical properties of ODS RAF steels

Energy Technology Data Exchange (ETDEWEB)

Auger, M.A., E-mail: maria.auger@materials.ox.ac.uk [Departamento de Física, Universidad Carlos III de Madrid, Av Universidad 30, 28911 Leganés (Spain); Department of Materials, University of Oxford, Parks Road, OX1 3PH Oxford (United Kingdom); Castro, V. de; Leguey, T.; Tarcísio-Costa, J.; Monge, M.A.; Muñoz, A.; Pareja, R. [Departamento de Física, Universidad Carlos III de Madrid, Av Universidad 30, 28911 Leganés (Spain)

2014-12-15

An oxide dispersion strengthened (ODS) alloy with nominal composition Fe–14Cr–2W–0.3Ti–0.24Y (wt.%) was produced by mechanical alloying using elemental powders, and subsequent hot isostatic pressing. The microstructure of the material and characteristics of the oxide particle dispersion were investigated by electron microscopy. The effect of heat treatments on the microhardness and tensile properties at room temperature was also studied. The results show that a fine dispersion of Y–O-rich nanoparticles is achieved, together with larger (Cr, Ti)-rich precipitates. The absence of Ti is apparent in the majority of these nanoparticles, in contrast with reported results for ODS Ti-modified steels processed with Y{sub 2}O{sub 3} addition.