WorldWideScience

Sample records for occupational ergonomics handbook

  1. Occupational ergonomics in space

    Science.gov (United States)

    Stramler, J.

    1992-01-01

    Ergonomics is often defined simply as the study of work. Related or synonymous terms include human factors, human engineering, engineering psychology, and others. Occupational ergonomics is a term that has been proposed to describe the study of the working environment, including the physical consequences resulting from having an improperly designed workplace. The routine space working environment presents some problems not found in the typical Earthbound workplace. These include radiation, intravehicular contamination/pollution, temperature extremes, impact with other objects, limited psychosocial relationships, sensory deprivation, and reduced gravity. These are important workplace considerations, and may affect astronauts either directly at work or at some point during their life as a result of their work under these conditions. Some of the major issues associated with each of these hazards are presented.

  2. Occupational ergonomics and injury prevention.

    Science.gov (United States)

    Stobbe, T J

    1996-01-01

    Ergonomics is the study of people at work. The current focus is on the prevention of work-induced musculoskeletal injuries through the application of sound ergonomic principles. This chapter has briefly outlined ergonomics and its history, has described low back pain and upper extremity cumulative trauma disorders from an ergonomic perspective, and has discussed control and prevention approaches for a few scenarios. Ergonomic principles are based on a combination of science and engineering and a thorough understanding of human capabilities and limitations. When these principles are applied to the design of a job, task, process, or procedure, the incidence and severity of musculoskeletal injuries decrease. In many cases productivity and morale also improve. Workers are spared suffering, and employers are spared costs. It is hoped that this discussion will encourage more health, safety, and business professionals to learn about and apply ergonomics in their workplaces for the improvement of the worker, product, and business. Finally, many additional epidemiologic studies on the individual and joint effects of the CTD risk factors are needed. The knowledge gained from these studies will promote the more effective application of ergonomic principles to reduce worker suffering, improve products, and reduce costs.

  3. [The role of ergonomics in occupational health - past and future].

    Science.gov (United States)

    Izumi, Hiroyuki

    2013-10-01

    The aim of working condition and ergonomics is to control the task method and condition for the best productive activity with the highest efficiency and sustainability. The Principles of Scientific Management by Frederick Winslow Taylor and its criticism by Gito Teruoka, the 1st director of The Institute for Science of Labour, are introduced for a better understanding of work condition and ergonomics in this article. Occupational physician have a duty to control working method and condition to reduce the health hazards induced by job duty. Not only the technical knowledge of medicine, but also a fundamental knowledge of manufacturing is needed for the occupational physician. The development of tools for early detection of health hazards and workload evaluation, the introduction of work management systems with cooperation between occupational physicians and technical experts of manufacturing are needed for effective control of the workplace. The strengthening of the Industrial Safety and Health Law should help to drive these improvements.

  4. Implantation of an ergonomics administration system in a company: report of an occupational therapist specialist in ergonomics.

    Science.gov (United States)

    Moraes, Berla; Andrade, Valéria Sousa

    2012-01-01

    This article aims to describe step-by-step the implementation of an ergonomics administration system in a company from March 2009 till March 2011 by an occupational therapist specialist in ergonomics based on the OSHAS 18001 guidelines and the Regulatory Norms 17 manual. The process began with the definition of five requisites with bases on the manual of application of the Regulatory Norms 17: survey; materials individual transportation and discharge; workplace furniture; workplace equipments; work environment and organization of the work to be managed with bases on the OSHAS 18001 guidelines. The following steps were established: sensitization of the company high administration, elaboration and institution of an ergonomics politics, development of ergonomics committees, ergonomics analysis of the work with recommendation of ergonomic improvements, implantation of improvements and evaluation or the results. This research experiment suggests the importance not only of a guiding axle but also of a professional qualification and participation of the company on the implementation of an ergonomics management system.

  5. Ergonomía y Terapia Ocupacional = Ergonomics and Occupational Therapy

    Directory of Open Access Journals (Sweden)

    Guzman Suárez, Olga Beatriz

    2008-02-01

    Full Text Available RESUMENEn éste artículo se dan a conocer algunas de las aplicaciones más importantes de la ergonomía en Terapia Ocupacional, puesto que a pesar de tener un gran reconocimiento en el sector trabajo, en donde hay un mayor predominio de estudio por parte de la ergonomía, aún se desconocen muchas de las actividades que pueden ser realizadas por éstos profesionales. Terapia Ocupacional abarca el estudio de todas las etapas de la vida del individuo, en cuanto a su desempeño ocupacional se refiere, lo cual garantiza un amplio campo de actuación profesional, que permite profundizar e investigar en diversas áreas, para que desde su experiencia y resultados se facilite el aporte a muchos proyectos de investigación que requieren de conceptos que son transversales a diferentes disciplinas y que pueden constituirse en conocimiento nuevo para la sociedad científica. Con la creación del Grupo de Salud Ocupacional y Ergonomía en la Universidad Manuela Beltrán, se pretende “Desarrollar proyectos de investigación en el campo de la ergonomía, aplicables en los contextos: laboral, escolar, social y familiar; que permitan la adaptación de diferentes entornos al ser humano y a su vez mejorar condiciones tendientes al logro de un óptimo desempeño y productividad”[1]. De esta manera, se inician proyectos de investigación con estudiantes de Terapia Ocupacional, cuyos avances han permitido escribir el presente articulo, se espera además la vinculación de otras áreas para su fortalecimiento. ABSTRACTIn this article they bring themselves to light some of the most important applications of the ergonomics in occupational therapy, since in spite of having a great recognition in the work sector, where there is a greater predominance of study on the part of the ergonomics, still many of the activities they do not know themselves that can be carried out for these professionals. The occupational therapy covers the study of all the phases of the life of

  6. Occupational safety and health law handbook

    Energy Technology Data Exchange (ETDEWEB)

    Sarvadi, D.G. [ed.; Keller; Heckman

    1999-09-01

    This book reviews the regulations and standards governing the protection of employees in the workplace and provides insight into dealing with pertinent regulations and regulatory authorities. Written for safety professionals, industrial hygienists, human resource professionals, attorneys, and students, this companion to Government Institutes' best-selling ``Environmental Law Handbook'' offers the legal fundamentals behind occupational safety and health laws in one concise and authoritative volume. In 19 chapters, the authoring law firm of Keller and Heckman cover the OSHAct and its development; OSHA, NIOSH, and OSHRC; the roles played by other regulatory agencies; the OSHA rulemaking process; OSHA Standards and the General Duty Clause; record keeping and reporting; employers' and employees' rights; inspections; violations, penalties, and how to contest them; criminal prosecutions; state plans; industry-specific issues; OSHA reform; and international regulations and standards. This book references approximately 400 seminal OSHA legal decisions from the approximately 1,300 cases on record and includes coverage of Canadian and European Community regulations, making it the first comprehensive global overview of occupational safety and health law.

  7. The effect of ergonomic training and intervention on reducing occupational stress among computer users

    Directory of Open Access Journals (Sweden)

    T. Yektaee

    2014-05-01

    Result: According to covariance analysis, ergonomic training and interventions lead to reduction of occupational stress of computer users. .Conclusion: Training computer users and informing them of the ergonomic principals and also providing interventions such as correction of posture, reducing duration of work time, using armrest and footrest would have significant implication in reducing occupational stress among computer users.

  8. Office Machine and Computer Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on office machine and computer occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include business machine repairers,…

  9. Air and Water Transportation Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on air and water transportation occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include civil aviation workers, air…

  10. The discipline of ergonomics in Cuba within the occupational health framework: background and trends.

    Science.gov (United States)

    Torres, Yaniel; Rodríguez, Yordán; Viña, Silvio

    2013-01-01

    The concept of ergonomics was introduced in Cuba at the beginning of the 1970s. More than 40 years later, the prevailing approach to workers' health is still generally reactive rather than proactive, despite the commitment of the government to the subject. A factor influencing this issue is, generally, lack of recognition of the benefits of establishing ergonomic principles within most occupational activities. Recent progress to move occupational health practice toward a more preventive approach has been conducted, frequently with international support. The introduction of a set of Cuban standards proposing the necessity of ergonomic evaluations is an example of this progress. The main challenge for Cuban ergonomists is to transfer knowledge to occupational health practitioners in order to be in concordance with basic standards and regulations regarding ergonomics. The article offers a short description of the history of ergonomics and an overview of ergonomics practice in Cuba.

  11. Collaborative field research and training in occupational health and ergonomics.

    Science.gov (United States)

    Kogi, K

    1998-01-01

    Networking collaborative research and training in Asian developing countries includes three types of joint activities: field studies of workplace potentials for better safety and health, intensive action training for improvement of working conditions in small enterprises, and action-oriented workshops on low-cost improvements for managers, workers, and farmers. These activities were aimed at identifying workable strategies for making locally adjusted improvements in occupational health and ergonomics. Many improvements have resulted as direct outcomes. Most these improvements were multifaceted, low-cost, and practicable using local skills. Three common features of these interactive processes seem important in facilitating realistic improvements: 1) voluntary approaches building on local achievements; 2) the use of practical methods for identifying multiple improvements; and 3) participatory steps for achieving low-cost results first. The effective use of group work tools is crucial. Stepwise training packages have thus proven useful for promoting local problem-solving interventions based on voluntary initiatives.

  12. Kaizen: ergonomics approach to occupational health and safety.

    Science.gov (United States)

    Kumashiro, Masaharu

    2011-12-01

    Kaizen (work improvement) is the forte of Japanese industry. Kaizen activities were born in the early 20th century under the name efficiency research. These activities were the beginning of industrial engineering (IE). Later on people began to rethink the single-minded devotion to improving productivity. Then the job re-design concept was developed. The main target of kaizen in the area of occupational health and safety in Japanese manufacturing is the improvement of inadequate working posture followed by the improvement of work for transporting and lifting heavy objects. Unfortunately, the kaizen activities undertaken by most Japanese companies are still focused on improving productivity and quality. The know-how for promoting kaizen activities that integrate the three aspects of IE, occupational health, and ergonomics is not being accumulated, however. In particular, the IE techniques should be incorporated into kaizen activities aimed at occupational safety and health, and the quantitative assessment of workload is required. In addition, it is important for on-the-job kaizen training in the ERGOMA Approach for production supervisors, who are the main advocates of IE kaizen.

  13. Occupational ergonomics: work related musculoskeletal disorders of the upper limb and back

    National Research Council Canada - National Science Library

    Kilbom, Åsa; Violante, Francesco; Armstrong, Thomas J

    2000-01-01

    ... and researchers in ergonomics, occupational health, epidemiology, psychology and engineering. It will also serve as an important source of information for policy makers. Francesco Violante is currently Director of the Regional Program in Occupational Health, a centre for research, teaching and clinical investigation into occupational disorders in Bol...

  14. Ergonomics

    Science.gov (United States)

    ... between you and your job conditions. Examples of ergonomic changes to your work might include Adjusting the position of your computer ... you are safe, comfortable, and less prone to work-related injuries.

  15. Ergonomics

    CSIR Research Space (South Africa)

    Schutte, PC

    2007-01-01

    Full Text Available whether trends exist across jobs that use similar equipment, tools or processes. 23.4.4 Limitations An effective ergonomics hazard identification and risk assessment process should facilitate the classification of possible high risk jobs in a mining... to review the data available, which identify a shop or workplace as a potential ergonomics problem area. It is also useful to become familiar with the processes and job activities that are performed in each work area. Step 2: Conduct a workplace/ work...

  16. Ergonomic initiatives at Inmetro: measuring occupational health and safety.

    Science.gov (United States)

    Drucker, L; Amaral, M; Carvalheira, C

    2012-01-01

    This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

  17. Machine Repairers and Operators. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on machine repairers and operators, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include appliance repairers,…

  18. Advancing Ergonomic Expertise in Occupational Therapists: Using an Online Course to Facilitate Knowledge Acquisition and Application of Ergonomics in Daily Practice

    Science.gov (United States)

    Finch, Denise E.

    2012-01-01

    Health promotion, prevention of disease and disability, and enhancing participation in meaningful life activities are areas that occupational therapists (OT) can contribute to at the individual, organizational and population levels (AOTA, 2008; Scaffa, Van Slyke & Brownson, 2008). OTs that are skilled in ergonomic assessment and evidence-based…

  19. Ergonomics work assessment in rural industrial settings: a student occupational therapy project.

    Science.gov (United States)

    Bowman, Peter J

    2012-01-01

    This case study describes a student occupational therapy (OT) program, the creation of a worksite assessment project as a part of a Community Connections: Partners for Learning and Service grant funded by Health Resources and Services Administration. The primary goals were to design occupation-based community learning experiences in a variety of rural community settings, so that students might benefit from participating in the community based learning and: based on the results, embed occupation-based learning into existing occupational therapy curriculum. The components of the project and the ergonomics content of the OT education program are described; details of the work assessment are presented with analysis of data from the student evaluation of this project.

  20. Aluminum, Iron and Steel, and Foundry Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on occupations in the various metal industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in the aluminum…

  1. Organizational ergonomics of occupational health methods and processes in a Brazilian oil refinery.

    Science.gov (United States)

    Bau, Lucy M S; Farias, Jean P; Buso, Sandro A; Passero, Carolina R Marcon

    2012-01-01

    Organizational ergonomics refers to the optimization of social technical systems, including their organizational structures, policies and processes. The relevant topics include communications, management of resources, work projects, temporal organization of work, team work, participative project, new work paradigms, cooperative work, organizational culture, network organizations and quality management (IEA, 2000). The purpose of this study was the reorganization of the methods and processes of the occupational health sector (SMS/SO - Portuguese acronym of the area) of a petrochemical company. The work involved thirty professionals: a coordinator, two occupational physicians, one cardiologist, one occupational dentist, two occupational nurses, eleven occupational health technicians, one social worker, one nutritionist, one phonoaudiologist, one ophthalmologist, one biochemist, two ergonomists, three administrative assistants, one administrator and one psychologist, during a six-month period. The methodology that was used sought to establish a cooperative alliance focused on change, transformation and acquisition of skills, reflecting directly on the attitudes and performance of the leaderships and their work teams. In addition to the feedback practice, the following supporting tools were used for the study's success: "Functional Polyvalence Matrix", "Management of Failures", 5W2H", "6M", "5 Why" and "process mapping". The intended results after the organization ergonomics restructuring process will allow the leader to help his or her team to make a diagnosis of the problems, identify options, develop strategies, establish targets and action plans, remove barriers, review contexts and implement the business management fundaments: planning, organization, management, coordination and control. The transformation possibilities allow us to consider some hypothesis: Before: Focus only on results. After: Engage collaborators to create sustainable results. Before: Operating

  2. How compatible are participatory ergonomics programs with occupational health and safety management systems?

    Science.gov (United States)

    Yazdani, Amin; Neumann, W Patrick; Imbeau, Daniel; Bigelow, Philip; Pagell, Mark; Theberge, Nancy; Hilbrecht, Margo; Wells, Richard

    2015-03-01

    Musculoskeletal disorders (MSD) are a major cause of pain, disability, and costs. Prevention of MSD at work is frequently described in terms of implementing an ergonomics program, often a participatory ergonomics (PE) program. Most other workplace injury prevention activities take place under the umbrella of a formal or informal occupational health and safety management system (OHSMS). This study assesses the similarities and differences between OHSMS and PE as such knowledge could help improve MSD prevention activities. Methods Using the internationally recognized Occupational Health and Safety Assessment Series (OHSAS 18001), 21 OHSMS elements were extracted. In order to define PE operationally, we identified the 20 most frequently cited papers on PE and extracted content relevant to each of the OHSAS 18001 elements. The PE literature provided a substantial amount of detail on five elements: (i) hazard identification, risk assessment and determining controls; (ii) resources, roles, responsibility, accountability, and authority; (iii) competence, training and awareness; (iv) participation and consultation; and (v) performance measurement and monitoring. However, of the 21 OHSAS elements, the PE literature was silent on 8 and provided few details on 8 others. The PE literature did not speak to many elements described in OHSMS and even when it did, the language used was often different. This may negatively affect the effectiveness and sustainability of PE initiatives within organizations. It is expected that paying attention to the approaches and language used in management system frameworks could make prevention of MSD activities more effective and sustainable.

  3. Occupational Safety and Health Act Handbook for Vocational and Technical Education Teachers.

    Science.gov (United States)

    Shashack, Willard F., Ed.

    The purpose of the handbook is to assist the school shop teacher in participating in voluntary compliance with the standards and regulations of the Occupational Safety and Health Act of 1970. The first major section deals with general shop safety and how the shop teacher can use the checklist to control possible safety violations in his shop. The…

  4. Twenty sixth DAE safety and occupational health professionals meet: cryogenic safety, electrical safety and ergonomics at work place

    International Nuclear Information System (INIS)

    2009-01-01

    This conference gathered knowledge in safety and occupational health hazards in various fields of nuclear science and technology like radiations, high voltages, ultra-low temperature, ultra-high magnetic fields, electrical breakdown, fire, ergonomics and cryogenic safety at work place. Papers relevant to INIS database are indexed separately

  5. Basic Reading Instruction for Students in Automotive Occupations. Student's Handbook.

    Science.gov (United States)

    General Behavioral Systems, Inc., Torrance, CA.

    The basic reading course outlined in this student handbook emphasizes the decoding process. The contents consist of a letter-and-sound spelling chart and 87 course modules which are based on single-letter and letter-combination sounds. Many of the modules include exercises, and some contain reading material. (JM)

  6. Ergonomic Intervention on the Occupational Stress of Selective Railway Workshop's Fitters

    Science.gov (United States)

    Mukhopadhyay, Partha; Dey, Netai Chandra

    2017-12-01

    In India, progressively rigorous health, safety and environmental regulation, together with rapid technological advances have caused job demands of man machine interface. Any deviations in implementing rules and regulations leave many workers at severe risks. In different railway workshops where periodic overhauling (POH) of different coaches and locomotives are obtained, the exhaustive nature of work results strain within the workers. Unfortunately physiological work studies on railway workers are highly inadequate in India. The present study is aimed to relate the ergonomic intervention on the occupational stress of railway workshop's fitters. Working heart rate (WHR) is measured continuously during their work schedule by portable heart rate monitor. Recovery heart rate and other essential occupational stress indexes are also measured along with total working environmental details. The working heart rate (WHR) of the subjects are found as 138 beats/min (bpm) and 121 bpm for the junior (age senior fitters (age > 40 years), respectively. Net cardiac cost (NCC) and relative cardiac cost (RCC) values exhibit their range in a non-safe zone. No recovery in resting heart rate denotes the hostile environmental effect on the worker's physiology. The effective temperature (ET) and wet bulb globe temperature (WBGT) of work site cross the recommended value. Clear evidences of a direct relationship between occupational hazard and fatigue is found and it can be considered as an environmental stresses which, in conjunction with other environmental and host factors induced a chronic fatigue that lead to non-specific health disorders.

  7. An ergonomics study of a semiconductors factory in an IDC for improvement in occupational health and safety.

    Science.gov (United States)

    Bin, Wong Saw; Richardson, Stanley; Yeow, Paul H P

    2010-01-01

    The study aimed to conduct an ergonomic intervention on a conventional line (CL) in a semiconductor factory in Malaysia, an industrially developing country (IDC), to improve workers' occupational health and safety (OHS). Low-cost and simple (LCS) ergonomics methods were used (suitable for IDCs), e.g., subjective assessment, direct observation, use of archival data and assessment of noise. It was found that workers were facing noise irritation, neck and back pains and headache in the various processes in the CL. LCS ergonomic interventions to rectify the problems included installing noise insulating covers, providing earplugs, installing elevated platforms, slanting visual display terminals and installing extra exhaust fans. The interventions cost less than 3 000 USD but they significantly improved workers' OHS, which directly correlated with an improvement in working conditions and job satisfaction. The findings are useful in solving OHS problems in electronics industries in IDCs as they share similar manufacturing processes, problems and limitations.

  8. The relationship between knowledge of ergonomic science and the occupational health among nursing staff affiliated to Golestan University of Medical Sciences

    Science.gov (United States)

    Juibari, Leila; Sanagu, Akram; Farrokhi, Nafiseh

    2010-01-01

    BACKGROUND: Occupational hazards are much higher for nurses than many other jobs and neglecting this fact may reduce the quality of nursing services. The aim of this study was to investigate the relationship between knowledge of ergonomics and occupational health among the nursing staff affiliated to Golestan University of Medical Sciences. METHODS: It was a cross-sectional analytical study on 423 nursing staff working in various medical centers affiliated to Golestan University of Medical Sciences in 2008, selected by quota randomized sampling. Data collection instrument was Ergonomics Questionnaire, which consisted of 72 questions. Cronbach’s alpha for main sections of the questionnaire was 0.8, 0.8 and 0.9. Descriptive and analytical tests were used for data analysis and an alpha error of 5% was considered. RESULTS: Of all the subjects, 36.1% had 5-10 years of work experience, 61.9% had a good knowledge of ergonomic principles, and 83% were exposed to a mild level of occupational hazards. There was no significant relationship between knowledge of ergonomics and occupational health (p = 0.08). The relationships between knowledge of ergonomics and age, gender, marital status, work experience, the type, and the location of service were significant (p ergonomics can provide a healthier work environment for nurses and optimize human resource efficiency. PMID:21589793

  9. Apparel, Baking, Laundry and Dry Cleaning, and Textile Mill Products Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on occupations in the clothing and baking industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in the…

  10. Aircraft, Missile, and Spacecraft; Office Machine and Computer; Electronics; and Motor Vehicle and Equipment Manufacturing Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on occupations in various manufacturing industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in…

  11. Ergonomics SA

    African Journals Online (AJOL)

    Journal Homepage Image. Ergonomics SA (esa) provides a medium for publication of material relevant to occupational conditions and needs in Southern Africa at a time of change unparalleled in history. To this end the journal accepts articles in the following categories: research papers, review articles, conceptual theories, ...

  12. The relationship between knowledge of ergonomic science and the occupational health among nursing staff affiliated to Golestan University of Medical Sciences

    OpenAIRE

    Juibari, Leila; Sanagu, Akram; Farrokhi, Nafiseh

    2010-01-01

    BACKGROUND: Occupational hazards are much higher for nurses than many other jobs and neglecting this fact may reduce the quality of nursing services. The aim of this study was to investigate the relationship between knowledge of ergonomics and occupational health among the nursing staff affiliated to Golestan University of Medical Sciences. METHODS: It was a cross-sectional analytical study on 423 nursing staff working in various medical centers affiliated to Golestan University of Medical Sc...

  13. Student manual, Book 2: Orientation to occupational safety compliance in DOE

    Energy Technology Data Exchange (ETDEWEB)

    Colley, D.L.

    1993-10-01

    This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

  14. Student manual, Book 2: Orientation to occupational safety compliance in DOE

    International Nuclear Information System (INIS)

    Colley, D.L.

    1993-01-01

    This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling ampersand storage; inspection responsibilities ampersand procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics ampersand human factors; medical ampersand first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures

  15. Health surveillance under adverse ergonomics conditions--validity of a screening method adapted for the occupational health service.

    Science.gov (United States)

    Jonker, Dirk; Gustafsson, Ewa; Rolander, Bo; Arvidsson, Inger; Nordander, Catarina

    2015-01-01

    A new health surveillance protocol for work-related upper-extremity musculoskeletal disorders has been validated by comparing the results with a reference protocol. The studied protocol, Health Surveillance in Adverse Ergonomics Conditions (HECO), is a new version of the reference protocol modified for application in the Occupational Health Service (OHS). The HECO protocol contains both a screening part and a diagnosing part. Sixty-three employees were examined. The screening in HECO did not miss any diagnosis found when using the reference protocol, but in comparison to the reference protocol considerable time savings could be achieved. Fair to good agreement between the protocols was obtained for one or more diagnoses in neck/shoulders (86%, k = 0.62) and elbow/hands (84%, k = 0.49). Therefore, the results obtained using the HECO protocol can be compared with a reference material collected with the reference protocol, and thus provide information of the magnitude of disorders in an examined work group. Practitioner Summary: The HECO protocol is a relatively simple physical examination protocol for identification of musculoskeletal disorders in the neck and upper extremities. The protocol is a reliable and cost-effective tool for the OHS to use for occupational health surveillance in order to detect workplaces at high risk for developing musculoskeletal disorders.

  16. Health surveillance under adverse ergonomics conditions – validity of a screening method adapted for the occupational health service

    Science.gov (United States)

    Jonker, Dirk; Gustafsson, Ewa; Rolander, Bo; Arvidsson, Inger; Nordander, Catarina

    2015-01-01

    A new health surveillance protocol for work-related upper-extremity musculoskeletal disorders has been validated by comparing the results with a reference protocol. The studied protocol, Health Surveillance in Adverse Ergonomics Conditions (HECO), is a new version of the reference protocol modified for application in the Occupational Health Service (OHS). The HECO protocol contains both a screening part and a diagnosing part. Sixty-three employees were examined. The screening in HECO did not miss any diagnosis found when using the reference protocol, but in comparison to the reference protocol considerable time savings could be achieved. Fair to good agreement between the protocols was obtained for one or more diagnoses in neck/shoulders (86%, k = 0.62) and elbow/hands (84%, k = 0.49). Therefore, the results obtained using the HECO protocol can be compared with a reference material collected with the reference protocol, and thus provide information of the magnitude of disorders in an examined work group. Practitioner Summary: The HECO protocol is a relatively simple physical examination protocol for identification of musculoskeletal disorders in the neck and upper extremities. The protocol is a reliable and cost-effective tool for the OHS to use for occupational health surveillance in order to detect workplaces at high risk for developing musculoskeletal disorders. PMID:25761380

  17. Application of ergonomics principles in underground mines through the Occupational Safety and Health Management System--OSHMS OHSAS 18.001:2007.

    Science.gov (United States)

    de Arruda, Agnaldo Fernando Vieira; Gontijo, Leila Maral

    2012-01-01

    The underground mining activity is regarded as one of the activities that cause most accidents, deaths and illnesses in the world, highlighting the coal mines. This study examined how ergonomics principles can help improve this environment, reduce the number of accidents and occupational diseases, train and empower workers and leaders and humanize the activities of the duty cycle of an underground mine. For this, it was developed a conceptual model of safety managing and health at work for the underground mining through the incorporation of ergonomics principles in the Occupational Safety and Health Management System and OHSAS 18001 (2007). The elaboration of the model was based on analysis of the environments and stages of work in underground mines and the PDCA cycle to ensure continuous improvement.

  18. Ergonomics in Dentistry

    Directory of Open Access Journals (Sweden)

    Dargahi H

    2010-01-01

    Full Text Available Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materials and Methods: This study reviewed the role and effectiveness of Ergonomics in dental profession. We used related journals, books and ergonomics websites to write this article. Conclusion: Many of researchers believe that awkward body posture and low movement are the sources of occupational disorders. Therefore, knowledge of ergonomics risk factors in dental office design is very important. Dentist's body posture and dental equipment evaluations are important factors in dental ergonomics. The most logical approach to design dental equipment for utilizing ergonomics principles is consideration of the dentist posture and type of movements and activities. In conclusion, dentists should be informed about dental ergonomics regulation and its different aspects. Furthermore, academic developments and research projects can be useful in this area.

  19. Ergonomics in Dentistry

    OpenAIRE

    Dargahi H; Saraji J; Sadr J; Sadri G

    2010-01-01

    Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materi...

  20. Ergonomics, Engineering, and Business: Repairing a Tricky Divorce

    DEFF Research Database (Denmark)

    Jensen, Per Langaa; Broberg, Ole; Møller, Niels

    2009-01-01

    This paper discusses how the ergonomics community can contribute to make ergonomics a strategic element in business decisions on strategy and implementation of strategy. The ergonomics community is seen as a heterogeneous entity made up of educational and research activities in universities......, ergonomists and engineers with ergonomic skills, professional ergonomics and engineering societies, and the complex of occupational health and safety regulation. This community interacts in different ways with companies and hereby influences how companies are dealing with ergonomics. The paper argues...

  1. Ergonomic risk factor identification for sewing machine operators through supervised occupational therapy fieldwork in Bangladesh: A case study.

    Science.gov (United States)

    Habib, Md Monjurul

    2015-01-01

    Many sewing machine operators are working with high risk factors for musculoskeletal health in the garments industries in Bangladesh. To identify the physical risk factors among sewing machine operators in a Bangladeshi garments factory. Sewing machine operators (327, 83% female), were evaluated. The mean age of the participants was 25.25 years. Six ergonomic risk factors were determined using the Musculoskeletal Disorders risk assessment. Data collection included measurements of sewing machine table and chair heights; this data was combined with information from informal interviews. Significant ergonomic risk factors found included the combination of awkward postures of the neck and back, repetitive hand and arm movements, poor ergonomic workstations and prolonged working hours without adequate breaks; these risk factors resulted in musculoskeletal complaints, sick leave, and switching jobs. One aspect of improving worker health in garment factories includes addressing musculoskeletal risk factors through ergonomic interventions.

  2. Ergonomics Contributions to Company Strategies

    NARCIS (Netherlands)

    J. Dul (Jan); W.P. Neumann (Patrick)

    2008-01-01

    textabstractManagers usually associate ergonomics with occupational health and safety and related legislation, not with business performance. In many companies, these decision makers seem not to be positively motivated to apply ergonomics for reasons of improving health and safety. In order to

  3. A review and exploration of sociotechnical ergonomics.

    Science.gov (United States)

    Dirkse van Schalkwyk, Riaan; Steenkamp, Rigard J

    2017-09-01

    A holistic review of ergonomic history shows that science remains important for general occupational health and safety (OSH), the broad society, culture, politics and the design of everyday things. Science provides an unconventional and multifaceted viewpoint exploring ergonomics from a social, corporate and OSH perspective. Ergonomic solutions from this mindset may redefine the science, and it will change with companies that change within this socially hyper-connected world. Authentic corporate social responsibility will counter 'misleadership' by not approaching ergonomics with an afterthought. The review concludes that ergonomics will be stronger with social respect and ergonomic thinking based on the optimisation of anthropometric data, digital human models, computer-aided tools, self-empowerment, job enrichment, work enlargement, physiology, industrial psychology, cybernetic ergonomics, operations design, ergonomic-friendly process technologies, ergonomic empowerment, behaviour-based safety, outcome-based employee wellness and fatigue risk management solutions, to mention a few.

  4. Carbon monoxide, industry, and performance. Third joint meeting of the British Occupational Hygiene Society, the Ergonomics Research Society, and the Society of Occupational Medicine

    Energy Technology Data Exchange (ETDEWEB)

    1975-08-01

    This meeting, held at Swansea in September 1974, covered the following aspects: arterial disease among blast furnace workers; threshold limit values (TLVs) under conditions of continuous exposure (closed environment of nuclear submarines); discussion of TLV for CO; methods of CO determination in air (Harrison N.); the infrared gas analysis; electrochemical CO sensors based on the metallised membrane electrode; solid state detectors; measurement of CO in blood (comparative review of methods); warning levels and alarm instrumentation; also: ergonomics of aircrew respiratory apparatus.

  5. Avoid Workplace Injury through Ergonomics | Poster

    Science.gov (United States)

    Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases

  6. Ergonomics Considerations in Microcomputing.

    Science.gov (United States)

    Torok, Andrew G.

    1984-01-01

    Discusses evolution of ergonomics and development of computer ergonomics with its sub-fields of hardware ergonomics (user-equipment-related problems including workstation design); software ergonomics (problems in communication with computers); and peopleware ergonomics (psychological impact). Ergonomic features of VDTs, keyboards, and printers are…

  7. Green buildings need good ergonomics.

    Science.gov (United States)

    Hedge, A; Dorsey, J A

    2013-01-01

    A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

  8. ERGONOMICs IN THE COMPUTER WORKsTATION

    African Journals Online (AJOL)

    2010-09-09

    Sep 9, 2010 ... in relation to their work environment and working surroundings. ... prolonged computer usage and application of ergonomics in the workstation. Design:One hundred and .... Occupational Health and Safety Services should.

  9. The development and design of the manipulation and control rooms - ergonomic aspects

    International Nuclear Information System (INIS)

    Ivergaard, T.

    1980-01-01

    The handbook is intended to facilitate the design and construction of controlrooms. The book appeals to instrument makers, computer operators and process technicians among others. The ergonomic data and relevant information are presented. (G.B.)

  10. Elementary Ergonomics

    Science.gov (United States)

    Grayson, Jennifer

    2009-01-01

    What's the number 1 threat to young students using computers today? According to Dan Odell, Microsoft's in-house ergonomist, when he asked parents this very question, "the things they were most concerned about were online predators and people taking advantage of their kids. Ergonomics was fairly far down the list." Unfortunately, that…

  11. Physical ergonomics

    NARCIS (Netherlands)

    Looze, M.P. de; Koningsveld, E.

    2013-01-01

    Physical ergonomics deals with the physical load on the human body when performing activities like work, sports, jobs at home or dealing with products. With regard to the exposure to physical loads and its potential effects on the human body, the presented framework is helpful. In this article we

  12. Ergonomics technology

    Science.gov (United States)

    Jones, W. L.

    1977-01-01

    Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

  13. Re-education of good ergonomics in nursing for Suomikoti

    OpenAIRE

    Isoheiko, Johanna

    2016-01-01

    The aim of this thesis was to promote and “refresh” the good ergonomics in nursing for Suomikoti in Sweden. The author noticed the need for re-education or “refreshment” of the nursing ergonomics among the permanent personnel as well updating knowledge of functioning of the existing assistive devices. Suomikoti has already a good and comprehensive transfer and ergonomics education and practical training for new employees arranged by their own physiotherapist and occupational therapist. It cov...

  14. Visual ergonomics in the workplace.

    Science.gov (United States)

    Anshel, Jeffrey R

    2007-10-01

    This article provides information about visual function and its role in workplace productivity. By understanding the connection among comfort, health, and productivity and knowing the many options for effective ergonomic workplace lighting, the occupational health nurse can be sensitive to potential visual stress that can affect all areas of performance. Computer vision syndrome-the eye and vision problems associated with near work experienced during or related to computer use-is defined and solutions to it are discussed.

  15. Ergonomic Chairs

    Science.gov (United States)

    1997-01-01

    Findings published in the NASA Anthropometric Source Book by Johnson Space Center helped BodyBilt, Inc. to fashion controlled comfort chairs that lessen the harmful effects of gravity on seated workers. Crew members living aboard NASA's Skylab noted that in space the human posture differs from the normal posture caused by the tug of one gravity. There has been an alarming increase in back pain and muscle fatigue in workers, along with a dramatic escalation in repetitive stress injuries. BodyBilt's ergonomically-correct line of office chairs are targeted for the average worker that sits for prolonged periods, be it in the classroom or boardroom. Their roster of national clients lists such organizations as IBM, Microsoft, Texas Instruments, Hewlett-Packard, Eastman-Kodak, Boeing, Motorola, and Walt Disney Studios.

  16. Ergonomics and epidemiology in evidence based health prevention

    DEFF Research Database (Denmark)

    Jensen, Olaf Chresten

    2009-01-01

    According to the definitions, ergonomics is a natural part of the health and safety activity but it has its own research methods and causal models. Public health, occupational and clinical medicines are closely related to epidemiology and differ from ergonomics by using a disease model with a wide...... success of health effects from the clinical trials could not be obtained. It is argued that the ergonomics design, Integration and Implementation can be strengthened by adapting the epidemiological methods and causal models. The ergonomics can then contribute to a common development of public health...

  17. Indonesia ergonomics roadmap: where we are going?

    Science.gov (United States)

    Wignjosoebroto, Sritomo

    2007-12-01

    There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least

  18. Brazing handbook

    CERN Document Server

    American Welding Society

    2007-01-01

    By agreement between the American Welding Society C3 Committee on Brazing and Soldering and the ASM Handbook Committee, the AWS Brazing Handbook has been formally adopted as part of the ASM Handbook Series. Through this agreement, the brazing content in the ASM Handbook is significantly updated and expanded. The AWS Brazing Handbook, 5th Edition provides a comprehensive, organized survey of the basics of brazing, processes, and applications. Addresses the fundamentals of brazing, brazement design, brazing filler metals and fluxes, safety and health, and many other topics. Includes new chapters on induction brazing and diamond brazing.

  19. Ergonomics: The Forgotten Variable.

    Science.gov (United States)

    Fitterman, L. Jeffrey

    1998-01-01

    Defines ergonomics and discusses design and environmental considerations. Suggests work-space requirements for: tables, chairs, monitor height, ambient noise and light, electricity, and environmental hazards. Includes sources for additional information related to ergonomic design. (AEF)

  20. Finding ergonomic solutions--participatory approaches.

    Science.gov (United States)

    Hignett, Sue; Wilson, John R; Morris, Wendy

    2005-05-01

    This paper gives an overview of the theory of participatory ergonomics interventions and summary examples from a range of industries, including health care, military, manufacturing, production and processing, services, construction and transport. The definition of participatory approaches includes interventions at macro (organizational, systems) levels as well as micro (individual), where workers are given the opportunity and power to use their knowledge to address ergonomic problems relating to their own working activities. Examples are given where a cost-effective benefit has been measured using musculoskeletal sickness absence and compensation costs. Other examples, using different outcome measures, also showed improvements, for example, an increase in productivity, improved communication between staff and management, reduction in risk factors, the development of new processes and new designs for work environments and activities. Three cases are described from Canada and Japan where the participatory project was led by occupational health teams, suggesting that occupational health practitioners can have an important role to play in participatory ergonomics projects.

  1. Meeting diversity in ergonomics

    NARCIS (Netherlands)

    Pikaar, R.N.; Koningsveld, E.A.P.; Settels, P.J.M.

    2007-01-01

    Key Features: Offers the conceptual tools for creating more adaptable ergonomic designs to meet the needs of diverse human populations, Unlock the strategic business value found in ergonomically safe and comfortable products, Learn from in-depth case studies how ergonomic intervention was

  2. Green ergonomics: combining sustainability and ergonomics.

    Science.gov (United States)

    Pilczuk, Davana; Barefield, Kevin

    2014-01-01

    When discussing ergonomics, the term 'sustainability' usually refers to the preservation of the human workforce. However, in 2010 Gulfstream Aerospace Corporation made a conscious effort to combine ergonomics and environmental sustainability in order to increase employee engagement for both programs. They introduced a companywide campaign called Green Ergo which is the idea of creating ergonomic solutions from scrap material found on site. This concept embraced the true meaning of 'green' and encouraged engineers and employees all across the company to design innovative green ergonomic solutions. The idea generated over 35 new ergo solutions, reduced waste production, and solved over 700 ergo problems for a fraction of the cost of newly purchased items. The demand for these items grew large enough that the company outsourced their manufacturing to a local non-profit. The Green Ergo campaign has changed the culture of the company and has increased the level of buy-in for both the ergonomics and sustainability programs.

  3. Ergonomics SA publishing requirements and submission guidelines

    African Journals Online (AJOL)

    rhodes

    This study assessed the ergonomic risk factors, and occupational health and ... health hazards such as increased mortality, dermal contamination, depression in cholinesterase level, fetal abnormalities spontaneous abortion among pregnant women ..... Another study in China showed the correlation between pesticide in ...

  4. Ergonomic Product Design 21

    International Nuclear Information System (INIS)

    Kwon, Yeong Guk

    1996-09-01

    This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

  5. Decommissioning Handbook

    International Nuclear Information System (INIS)

    Cusack, J.G.; Dalfonso, P.H.; Lenyk, R.G.

    1994-01-01

    The Decommissioning Handbook provides technical guidance on conducting decommissioning projects. Information presented ranges from planning logic, regulations affecting decommissioning, technology discussion, health and safety requirements, an developing a cost estimate. The major focus of the handbook are the technologies -- decontamination technologies, waste treatment, dismantling/segmenting/demolition, and remote operations. Over 90 technologies are discussed in the handbook providing descriptions, applications, and advantages/disadvantages. The handbook was prepared to provide a compendium of available or potentially available technologies in order to aid the planner in meeting the specific needs of each decommissioning project. Other subjects presented in the Decommissioning Handbook include the decommissioning plan, characterization, final project configuration based planning, environmental protection, and packaging/transportation. These discussions are presented to complement the technologies presented in the handbook

  6. Decommissioning handbook

    Energy Technology Data Exchange (ETDEWEB)

    Manion, W.J.; LaGuardia, T.S.

    1980-11-01

    This document is a compilation of information pertinent to the decommissioning of surplus nuclear facilities. This handbook is intended to describe all stages of the decommissioning process including selection of the end product, estimation of the radioactive inventory, estimation of occupational exposures, description of the state-of-the-art in re decontamination, remote csposition of wastes, and estimation of program costs. Presentation of state-of-the-art technology and data related to decommissioning will aid in consistent and efficient program planning and performance. Particular attention is focused on available technology applicable to those decommissioning activities that have not been accomplished before, such as remote segmenting and handling of highly activated 1100 MW(e) light water reactor vessel internals and thick-walled reactor vessels. A summary of available information associated with the planning and estimating of a decommissioning program is also presented. Summarized in particular are the methodologies associated with the calculation and measurement of activated material inventory, distribution, and surface dose level, system contamination inventory and distribution, and work area dose levels. Cost estimating techniques are also presented and the manner in which to account for variations in labor costs as impacting labor-intensive work activities is explained.

  7. Decommissioning handbook

    International Nuclear Information System (INIS)

    Manion, W.J.; LaGuardia, T.S.

    1980-11-01

    This document is a compilation of information pertinent to the decommissioning of surplus nuclear facilities. This handbook is intended to describe all stages of the decommissioning process including selection of the end product, estimation of the radioactive inventory, estimation of occupational exposures, description of the state-of-the-art in re decontamination, remote csposition of wastes, and estimation of program costs. Presentation of state-of-the-art technology and data related to decommissioning will aid in consistent and efficient program planning and performance. Particular attention is focused on available technology applicable to those decommissioning activities that have not been accomplished before, such as remote segmenting and handling of highly activated 1100 MW(e) light water reactor vessel internals and thick-walled reactor vessels. A summary of available information associated with the planning and estimating of a decommissioning program is also presented. Summarized in particular are the methodologies associated with the calculation and measurement of activated material inventory, distribution, and surface dose level, system contamination inventory and distribution, and work area dose levels. Cost estimating techniques are also presented and the manner in which to account for variations in labor costs as impacting labor-intensive work activities is explained

  8. Radioactivity Handbook

    International Nuclear Information System (INIS)

    Firestone, R.B.; Browne, E.

    1985-01-01

    The Radioactivity Handbook will be published in 1985. This handbook is intended primarily for applied users of nuclear data. It will contain recommended radiation data for all radioactive isotopes. Pages from the Radioactivity Handbook for A = 221 are shown as examples. These have been produced from the LBL Isotopes Project extended ENDSF data-base. The skeleton schemes have been manually updated from the Table of Isotopes and the tabular data are prepared using UNIX with a phototypesetter. Some of the features of the Radioactivity Handbook are discussed here

  9. Web sites for ergonomics support

    OpenAIRE

    Fafejta, Martin

    2012-01-01

    The subject of this bachelor thesis is survey of computer classrooms from the ergonomic point of view and show ergonomic rules to internet community in accessible form. Theoretic knowledge was gain from literature connected with ergonomic and work hygiene. Main relevance was given to use of computer and ergonomic of computer classroom. Several schools was evaluates in practical part with focus on ergonomic suitability. The conclusions of this thesis are websites contains ergonomics rules and ...

  10. Ergonomics and information technique

    International Nuclear Information System (INIS)

    Krueger, H.

    1985-01-01

    Ergonomics are an essential safety factor in controlling automated processes. It has to be taken into account in three stages: information presentation, information perception and information treatment

  11. Advances in industrial ergonomics and safety II

    Energy Technology Data Exchange (ETDEWEB)

    Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

    1990-01-01

    135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

  12. Advances in industrial ergonomics and safety II

    Energy Technology Data Exchange (ETDEWEB)

    Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

    1990-01-01

    135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

  13. Ergonomic analysis of microlaryngoscopy

    Science.gov (United States)

    Statham, Melissa McCarty; Sukits, Alison L.; Redfern, Mark S.; Smith, Libby J.; Sok, John C.; Rosen, Clark A.

    2016-01-01

    Objectives/Hypothesis To apply ergonomic principles in analysis of three different operative positions used in laryngeal microsurgery. Study Design Prospective case-control study. Methods Laryngologists were studied in three different microlaryngeal operative positions: a supported position in a chair with articulated arm supports, a supported position with arms resting on a Mayo stand, and a position with arms unsupported. Operative positions were uniformly photographed in three dimensions. Full body postural data was collected and analyzed using the validated Rapid Upper Limb Assessment (RULA) tool to calculate a risk score indicative of potential musculoskeletal misuse in each position. Joint forces were calculated for the neck and shoulder, and compression forces were calculated for the L5/S1 disc space. Results Higher-risk postures were obtained with unfavorably adjusted eyepieces and lack of any arm support during microlaryngeal surgery. Support with a Mayo stand led to more neck flexion and strain. Using a chair with articulated arm supports leads to decreased neck strain, less shoulder torque, and decreased compressive forces on the L5/S1 disc space. Ideal postures during microlaryngoscopy place the surgeon with arms and feet supported, with shoulders in an unraised, neutral anatomic position, upper arms neutrally positioned 20° to 45° from torso, lower arms neutrally positioned 60° to 100° from torso, and wrists extended or flexed postures and repetitive stress injury may lead to reduced occupationally related musculoskeletal pain and may improve microsurgical motor control. Laryngoscope, 2010 PMID:19950376

  14. A framework for providing ergonomic feedback using smart cameras.

    NARCIS (Netherlands)

    Chen, Chih-Wei; Maatta, T.T.; Wong, K.; Aghajan, H.

    2012-01-01

    The importance of proper ergonomics for the health and wellbeing of office workers is being increasingly promoted by federal agencies, such as the OSHA (Occupational Safety and Health Administration) and the NIOSH (National Institute for Occupational Safety and Health), which provide guidelines for

  15. Action in Ergonomics

    Science.gov (United States)

    Training Officer, 1975

    1975-01-01

    A discussion with James Crowley of British Steel Corporation on the changing face of ergonomics in practice today and yesterday examines the influence of experimental psychology on the method of study and data collection. The broadening scope of ergonomics from only safety concerns to cost effectiveness and the computer are analyzed. (Author/JB)

  16. Crane handbook

    CERN Document Server

    Dickie, D E

    1975-01-01

    Crane Handbook offers extensive advice on how to properly handle a crane. The handbook highlights various safety requirements and rules. The aim of the book is to improve the readers' crane operating skills, which could eventually make the book a standard working guide for training operators. The handbook first reminds the readers that the machine should be carefully tested by a regulatory board before use. The text then notes that choosing the right crane for a particular job is vital and explains why this is the case. It then discusses how well-equipped and durable the crane should be. T

  17. Ergonomics observation: Harvesting tasks at oil palm plantation.

    Science.gov (United States)

    Ng, Yee Guan; Shamsul Bahri, Mohd Tamrin; Irwan Syah, Md Yusoff; Mori, Ippei; Hashim, Zailina

    2014-01-01

    Production agriculture is commonly associated with high prevalence of ergonomic injuries, particularly during intensive manual labor and during harvesting. This paper intends to briefly describe an overview of oil palm plantation management highlighting the ergonomics problem each of the breakdown task analysis. Although cross-sectional field visits were conducted in the current study, insight into past and present occupational safety and health concerns particularly regarding the ergonomics of oil palm plantations was further exploited. Besides discussion, video recordings were extensively used for ergonomics analysis. The unique commodity of oil palm plantations presents significantly different ergonomics risk factors for fresh fruit bunch (FFB) cutters during different stages of harvesting. Although the ergonomics risk factors remain the same for FFB collectors, the intensity of manual lifting increases significantly with the age of the oil palm trees-weight of FFB. There is urgent need to establish surveillance in order to determine the current prevalence of ergonomic injuries. Thereafter, ergonomics interventions that are holistic and comprehensive should be conducted and evaluated for their efficacy using approaches that are integrated, participatory and cost-effective.

  18. Ergonomics policy in Indonesia.

    Science.gov (United States)

    Sutarjo, Untung S

    2007-12-01

    Workers' conditions in accordance with their place of work are different from one area to another, especially in this reformation era where there are immense alterations in politics shown from the centralized government shifting to decentralization and district autonomy. Ergonomics problems in Indonesia are reviewed. In home industries, workers have to adjust themselves to their jobs, and ergonomic improvement may face significant impediments especially in small-scale industries. It is necessary to create or identify the most plausible model to be implemented in accordance with the conditions of districts, including low awareness about the relation between ergonomics and workers' productivity in producing goods and services and working processes scattered often at their own houses. As conditions conducive to ergonomics programs, district-level willingness to improve and increase the wealth of their society, recognition by businesses about the impacts of ergonomics on productivity and reduction of medical treatment costs may be mentioned. Labor unions support ergonomic improvements at production processes, and professionals and academicians are ready to assist, whereas national banks and foreign investment may encourage new technologies including ergonomics aspects. It is important to strengthen ergonomic improvement efforts in Indonesia through establishing district ergonomics improvement networks and ergonomics peer leaders with the support of continual training starting from the training of core leaders at the province level and extending to peer leaders at district level. This training should be made as simple as possible in order to facilitate innovations toward changes. Finally assistance is needed by the mentor teams in order to periodically monitor the improvements undertaken.

  19. Design Processes and Constructive Ergonomics

    DEFF Research Database (Denmark)

    Broberg, Ole

    2015-01-01

    This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, ...

  20. Decommissioning Handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Decommissioning Handbook is a technical guide for the decommissioning of nuclear facilities. The decommissioning of a nuclear facility involves the removal of the radioactive and, for practical reasons, hazardous materials to enable the facility to be released and not represent a further risk to human health and the environment. This handbook identifies and technologies and techniques that will accomplish these objectives. The emphasis in this handbook is on characterization; waste treatment; decontamination; dismantling, segmenting, demolition; and remote technologies. Other aspects that are discussed in some detail include the regulations governing decommissioning, worker and environmental protection, and packaging and transportation of the waste materials. The handbook describes in general terms the overall decommissioning project, including planning, cost estimating, and operating practices that would ease preparation of the Decommissioning Plan and the decommissioning itself. The reader is referred to other documents for more detailed information. This Decommissioning Handbook has been prepared by Enserch Environmental Corporation for the US Department of Energy and is a complete restructuring of the original handbook developed in 1980 by Nuclear Energy Services. The significant changes between the two documents are the addition of current and the deletion of obsolete technologies and the addition of chapters on project planning and the Decommissioning Plan, regulatory requirements, characterization, remote technology, and packaging and transportation of the waste materials.

  1. Design Processes and Constructive Ergonomics

    OpenAIRE

    Broberg, Ole

    2015-01-01

    This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, many challenges are to be overcome. They relate among others to education and training of ergonomist, and the cultural and institutional setting of ergonomics in specific countries.

  2. ERGONOMICS safety course

    CERN Multimedia

    SC Unit

    2008-01-01

    Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! •\tErgonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 •\tErgonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive an invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

  3. ERGONOMICS safety course

    CERN Multimedia

    SC Unit

    2008-01-01

    Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive and invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

  4. ERGONOMICS safety course

    CERN Multimedia

    SC Unit

    2008-01-01

    Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will be invited by email after your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

  5. [Nursing work and ergonomics].

    Science.gov (United States)

    Marziale, M H; Robazzi, M L

    2000-12-01

    This text articulates empirical evidence resulting from scientific work with the intention of providing a reflection about the application of ergonomics as a methodological instrument to support improvement of the labor conditions of nursing personnel in hospitals.

  6. Sound in Ergonomics

    Directory of Open Access Journals (Sweden)

    Jebreil Seraji

    1999-03-01

    Full Text Available The word of “Ergonomics “is composed of two separate parts: “Ergo” and” Nomos” and means the Human Factors Engineering. Indeed, Ergonomics (or human factors is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data and methods to design in order to optimize human well-being and overall system performance. It has applied different sciences such as Anatomy and physiology, anthropometry, engineering, psychology, biophysics and biochemistry from different ergonomics purposes. Sound when is referred as noise pollution can affect such balance in human life. The industrial noise caused by factories, traffic jam, media, and modern human activity can affect the health of the society.Here we are aimed at discussing sound from an ergonomic point of view.

  7. Ergonomics SA: Contact

    African Journals Online (AJOL)

    Principal Contact. Mrs June McDougall. Rhodes University. Department of Human Kinetics and Ergonomics. P.O. Box 94. Rhodes University. Grahamstown. 6140. Phone: +27 46 6038471. Email: j.mcdougall@ru.ac.za ...

  8. What price ergonomics?

    OpenAIRE

    Stanton, NA; Young, MS

    1999-01-01

    Ergonomists have a say in the design of almost everything in the modern world, but there is little evidence that their methods actually work. Here is an evaluation of those methods and of the worth of ergonomics in design.

  9. Advances in industrial ergonomics and safety I

    Energy Technology Data Exchange (ETDEWEB)

    Mital, A. (ed.) (University of Cincinnati, Cincinnati, OH (USA). Dept. of Mechanical and Industrial Engineering, Ergonomics Research Lab.)

    1989-01-01

    125 papers are presented under the session headings: industrial ergonomics - programs and applications; applied work physiology; occupational biomechanics; engineering anthropometry; work and protective clothing; hand tools; human-computer interface; theory and practice of industrial safety; human perception and performance; human strengths; industrial noise and vibration; machine guarding and industrial machine safety; manual materials handling; modelling for safety and health; occupational injuries and health problems; policies and standards; quality control and inspection; rehabilitation and designing for the disabled; work duration and fatigue; and work and work place design. Includes papers on static and dynamic back strength of underground coal miners, and slip and fall accidents during equipment maintenance in the surface mining industry.

  10. Ergonomics in laparoscopic surgery

    Directory of Open Access Journals (Sweden)

    Supe Avinash

    2010-01-01

    Full Text Available Laparoscopic surgery provides patients with less painful surgery but is more demanding for the surgeon. The increased technological complexity and sometimes poorly adapted equipment have led to increased complaints of surgeon fatigue and discomfort during laparoscopic surgery. Ergonomic integration and suitable laparoscopic operating room environment are essential to improve efficiency, safety, and comfort for the operating team. Understanding ergonomics can not only make life of surgeon comfortable in the operating room but also reduce physical strains on surgeon.

  11. Ergonomic Improvements for Foundries

    Energy Technology Data Exchange (ETDEWEB)

    Frank Peters; Patrick Patterson

    2002-06-18

    The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products.

  12. Design and management of production systems: Integration of human factors and ergonomics

    DEFF Research Database (Denmark)

    Jensen, Per Langå; Broberg, Ole; Hasle, Peter

    2006-01-01

    Integration of ergonomics, human factors and occupational health and safety into design and management of pro-duction systems has for years been the major strategy for professional within the field. The traditional approach based on establishing ergonomic criteria’s to be integrated into other...

  13. Exposure assessment of upper limb repetitive movements: a consensus document developed by the Technical Committee on Musculoskeletal Disorders of International Ergonomics Association (IEA) endorsed by International Commission on Occupational Health (ICOH).

    Science.gov (United States)

    Colombini, D; Occhipinti, E; Delleman, N; Fallentin, N; Kilbom, A; Grieco, A

    2001-01-01

    This consensus document intends to supply a set of definitions, criteria and procedures useful to describe and, wherever possible, to assess the work conditions that can represent a physical overload for the upper limbs. The document is aimed at all the operators, i.e. occupational doctors but mainly technicians, who are, involved in risk exposure assessment and management. The document intends to provide methods and procedures easily applicable in the field, possibly not requiring sophisticated instrumentation and when possible based on observation procedures. The proposed methods shall be based as far as possible on knowledge and data from scientific literature: should they be contradictory or deficient, reference will be made to standards or pre-standards issued by national and international agencies and bodies, with the experience of researchers involved and common sense. In this regard, it is to be emphasized that the potential users increasingly demand an easily applicable method for description and assessment of work with repetitive movements. The group intends to give a response even if there are still uncertainties from a strictly scientific standpoint: however the group commits itself to perform subsequent validations especially of as yet unconsolidated issues. This document focuses specifically on identification of risk factors and describes some of the methods that have been developed for evaluating them. There is a rapidly developing body of literature on job analysis and not yet agreement on a single best way to analyze jobs. Professional judgement is required to select the appropriate methods. Analysis and design of jobs should to be integrated into an ongoing ergonomics program that includes management commitment, training, health surveillance, and medical case management. In summing up this report, space must be given to the check lists that are so often seen in the medical press, although this is not the occasion to propose a detailed analytical

  14. Connections between voice ergonomic risk factors and voice symptoms, voice handicap, and respiratory tract diseases.

    Science.gov (United States)

    Rantala, Leena M; Hakala, Suvi J; Holmqvist, Sofia; Sala, Eeva

    2012-11-01

    The aim of the study was to investigate the connections between voice ergonomic risk factors found in classrooms and voice-related problems in teachers. Voice ergonomic assessment was performed in 39 classrooms in 14 elementary schools by means of a Voice Ergonomic Assessment in Work Environment--Handbook and Checklist. The voice ergonomic risk factors assessed included working culture, noise, indoor air quality, working posture, stress, and access to a sound amplifier. Teachers from the above-mentioned classrooms reported their voice symptoms, respiratory tract diseases, and completed a Voice Handicap Index (VHI). The more voice ergonomic risk factors found in the classroom the higher were the teachers' total scores on voice symptoms and VHI. Stress was the factor that correlated most strongly with voice symptoms. Poor indoor air quality increased the occurrence of laryngitis. Voice ergonomics were poor in the classrooms studied and voice ergonomic risk factors affected the voice. It is important to convey information on voice ergonomics to education administrators and those responsible for school planning and taking care of school buildings. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

  15. A trend analysis of ergonomic research themes in Taiwan.

    Science.gov (United States)

    Lin, Chih-Long

    2015-01-01

    This paper examines the development of ergonomics in Taiwan by analysing 1404 scientific articles published by 113 permanent members of the Ergonomics Society of Taiwan (EST). Each article was classified by key words and abstract content. Each article was also coded by period of publication (1971-1992 (first period), 1993-1997 (second period), 1998-2002 (third period), 2003-2007 (fourth period), and 2008-2012 (fifth period), and against 13 topic categories. The results show that rate of publication has increased by approximately 100 articles every five years since 1993.The most popular topic was ergonomics assessment and analysis techniques in the first period, force exertion-related research in the second period, product design and evaluation in the third period, occupational safety and health in the fourth period and human-computer interface in the fifth period. Each of these is highly relevant to current contemporary issues around the world. Finally, potential areas for future ergonomics research in Taiwan are discussed. This study investigates the trends in academic papers published by members of the EST. Over time, topics have shifted from ergonomics evaluation methods to occupational safety and health, and human–computer interaction. The findings should be considered as important references for planning the future of ergonomics in Taiwan.

  16. Safety and environmental health handbook

    Science.gov (United States)

    ,

    1989-01-01

    This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

  17. Ergonomics in the operating room.

    Science.gov (United States)

    Janki, Shiromani; Mulder, Evalyn E A P; IJzermans, Jan N M; Tran, T C Khe

    2017-06-01

    Since the introduction of minimally invasive surgery, surgeons appear to be experiencing more occupational musculoskeletal injuries. The aim of this study is to investigate the current frequency and effects of occupational musculoskeletal injuries on work absence. An online questionnaire was conducted among all surgeons affiliated to the Dutch Society for Endoscopic Surgery, Gastrointestinal Surgery, and Surgical Oncology. In addition, this survey was conducted among surgeons, gynaecologists, and urologists of one cluster of training hospitals in the Netherlands. There were 127 respondents. Fifty-six surgeons currently suffer from musculoskeletal complaints, and 30 have previously suffered from musculoskeletal complaints with no current complaints. Frequently reported localizations were the neck (39.5 %), the erector spinae muscle (34.9 %), and the right deltoid muscle (18.6 %). Most of the musculoskeletal complaints were present while operating (41.8 %). Currently, 37.5 % uses medication and/or therapy to reduce complaints. Of surgeons with past complaints, 26.7 % required work leave and 40.0 % made intraoperative adjustments. More surgeons with a medical history of musculoskeletal complaints have current complaints (OR 6.1, 95 % CI 1.9-19.6). There were no significant differences between surgeons of different operating techniques in localizations and frequency of complaints, or work leave. Despite previous various ergonomic recommendations in the operating room, the current study demonstrated that musculoskeletal complaints and subsequent work absence are still present among surgeons, especially among surgeons with a positive medical history for musculoskeletal complaints. Even sick leave was necessary to fully recover. There were no significant differences in reported complaints between surgeons of different operating techniques. Almost half of the respondents with complaints made intraoperative ergonomic adjustments to prevent future complaints. The

  18. Evaluation of ergonomic and education interventions to reduce occupational sitting in office-based university workers: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Radas, Antonia; Mackey, Martin; Leaver, Andrew; Bouvier, Anna-Louise; Chau, Josephine Y; Shirley, Debra; Bauman, Adrian

    2013-10-12

    Prolonged sitting is a specific occupational hazard in office workers. There is growing evidence that prolonged sitting is detrimental to metabolic health. The aim of this study is to determine whether providing office workers with education along with adjustable sit-stand workstations leads to reduction in sitting behavior. A randomized control trial (RCT) with three groups (one control group and two intervention groups) will be conducted in an office workplace setting. The education intervention group will receive an education package that encourages reduction in sitting behaviors. The sit-stand desk intervention group will receive the same education package along with an adjustable sit-stand desk. Participants will be included in the study if they are currently employed in a full-time academic or administrative role that involves greater than 15 hours per week or greater than 4 hours per day computer-based work. Baseline data will include participant's age, gender, weight, height, smoking habit, employment position, level of education, and baseline self-reported leisure time physical activity. The primary outcome is the average daily sedentary time during work hours, measured by an accelerometer. Participant recruitment commenced in March 2013 and will be completed by December 2013. This study will determine whether providing office workers with an adjustable sit-stand desk and individually targeted education, or education alone, is more effective in decreasing sitting behaviors than no intervention. Australian New Zealand Clinical Trials Registry: ACTRN12613000366752.

  19. Human Factors And Ergonomics In The Planning Of Production

    DEFF Research Database (Denmark)

    Jensen, Per Langå

    2002-01-01

    For year’s integration of ergonomics into the planning of new production processes has been an ideal for regulating agencies supported by ergonomic experts. But the ideal appears to be difficult to live up to. A development of tools both by agencies and by groups of researchers has been seen...... of organizational conditions for giving ergonomics a stronger position in the firm. Ergonomists have to tackle these issues, but it implies a new understanding of their roles, which goes beyond the traditional discussion of expert versus facilitator. The paper is based on an evaluation of a Swedish research......-programme of a new approach to intervention studies on musculosceletaldiseases, on a major Danish research programme on integrating ergonomics (working environment) into the planning activities of the enterprises and on discussions with the staff of the Danish mandatory occupational health and safety services...

  20. Employee Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Bello, Madelyn

    2008-09-05

    Welcome to Berkeley Lab. You are joining or are already a part of a laboratory with a sterling tradition of scientific achievement, including eleven Nobel Laureates and thirteen National Medal of Science winners. No matter what job you do, you make Berkeley Lab the outstanding organization that it is. Without your hard work and dedication, we could not achieve all that we have. We value you and thank you for choosing to be part of our community. This Employee Handbook is designed to help you navigate the Lab. With over 3,000 employees, an additional 3,000 guests visiting from countries around the world, a 200-acre campus and many policies and procedures, learning all the ins and outs may seem overwhelming, especially if you're a new employee. However, even if you have been here for a while, this Handbook should be a useful reference tool. It is meant to serve as a guide, highlighting and summarizing what you need to know and informing you where you can go for more detailed information. The general information provided in this Handbook serves only as a brief description of many of the Lab's policies. Policies, procedures and information are found in the Lab's Regulations and Procedures Manual (RPM), Summary Plan Descriptions, University of California policies, and provisions of Contract 31 between the Regents of the University and the U.S. Department of Energy. In addition, specific terms and conditions for represented employees are found in applicable collective bargaining agreements. Nothing in this Handbook is intended to supplant, change or conflict with the previously mentioned documents. In addition, the information in this Handbook does not constitute a contract or a promise of continued employment and may be changed at any time by the Lab. We believe employees are happier and more productive if they know what they can expect from their organization and what their organization expects from them. The Handbook will familiarize you with the

  1. Maximum permissible body burdens and maximum permissible concentrations of radionuclides in air and in water for occupational exposure. Recommendations of the National Committee on Radiation Protection. Handbook 69

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-06-05

    The present Handbook and its predecessors stem from the Second International Congress of Radiology, held in Stockholm in 1928. At that time, under the auspices of the Congress, the International Commission on Radiological Protection (ICRP) was organized to deal initially with problems of X-ray protection and later with radioactivity protection. At that time 'permissible' doses of X-rays were estimated primarily in terms of exposures which produced erythema, the amount of exposure which would produce a defined reddening of the skin. Obviously a critical problem in establishing criteria for radiation protection was one of developing useful standards and techniques of physical measurement. For this reason two of the organizations in this country with a major concern for X-ray protection, the American Roentgen Ray Society and the Radiology Society of North America, suggested that the National Bureau of Standards assume responsibility for organizing representative experts to deal with the problem. Accordingly, early in 1929, an Advisory Committee on X-ray and Radium Protection was organized to develop recommendations on the protection problem within the United States and to formulate United States points of view for presentation to the International Commission on Radiological Protection. The organization of the U.S. Advisory Committee included experts from both the medical and physical science fields. The recommendations of this Handbook take into consideration the NCRP statement entitled 'Maximum Permissible Radiation Exposures to Man', published as an addendum to Handbook 59 on April 15, 1958. As noted above this study was carried out jointly by the ICRP and the NCRP, and the complete report is more extensive than the material contained in this Handbook.

  2. Maximum permissible body burdens and maximum permissible concentrations of radionuclides in air and in water for occupational exposure. Recommendations of the National Committee on Radiation Protection. Handbook 69

    International Nuclear Information System (INIS)

    1959-01-01

    The present Handbook and its predecessors stem from the Second International Congress of Radiology, held in Stockholm in 1928. At that time, under the auspices of the Congress, the International Commission on Radiological Protection (ICRP) was organized to deal initially with problems of X-ray protection and later with radioactivity protection. At that time 'permissible' doses of X-rays were estimated primarily in terms of exposures which produced erythema, the amount of exposure which would produce a defined reddening of the skin. Obviously a critical problem in establishing criteria for radiation protection was one of developing useful standards and techniques of physical measurement. For this reason two of the organizations in this country with a major concern for X-ray protection, the American Roentgen Ray Society and the Radiology Society of North America, suggested that the National Bureau of Standards assume responsibility for organizing representative experts to deal with the problem. Accordingly, early in 1929, an Advisory Committee on X-ray and Radium Protection was organized to develop recommendations on the protection problem within the United States and to formulate United States points of view for presentation to the International Commission on Radiological Protection. The organization of the U.S. Advisory Committee included experts from both the medical and physical science fields. The recommendations of this Handbook take into consideration the NCRP statement entitled 'Maximum Permissible Radiation Exposures to Man', published as an addendum to Handbook 59 on April 15, 1958. As noted above this study was carried out jointly by the ICRP and the NCRP, and the complete report is more extensive than the material contained in this Handbook

  3. Effectiveness of computer ergonomics interventions for an engineering company: a program evaluation.

    Science.gov (United States)

    Goodman, Glenn; Landis, James; George, Christina; McGuire, Sheila; Shorter, Crystal; Sieminski, Michelle; Wilson, Tamika

    2005-01-01

    Ergonomic principles at the computer workstation may reduce the occurrence of work related injuries commonly associated with intensive computer use. A program implemented in 2001 by an occupational therapist and a physical therapist utilized these preventative measures with education about ergonomics, individualized evaluations of computer workstations, and recommendations for ergonomic and environmental changes. This study examined program outcomes and perceived effectiveness based on review of documents, interviews, and surveys of the employees and the plant manager. The program was deemed successful as shown by 59% of all therapist recommendations and 74% of ergonomic recommendations being implemented by the company, with an 85% satisfaction rate for the ergonomic interventions and an overall employee satisfaction rate of 70%. Eighty-one percent of the physical problems reported by employees were resolved to their satisfaction one year later. Successful implementation of ergonomics programs depend upon effective communication and education of the consumers, and the support, cooperation and collaboration of management and employees.

  4. Ergonomics in radiology

    Energy Technology Data Exchange (ETDEWEB)

    Goyal, N. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)], E-mail: nimitgoyal@doctors.org.uk; Jain, N.; Rachapalli, V. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)

    2009-02-15

    The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations.

  5. Ergonomics in radiology

    International Nuclear Information System (INIS)

    Goyal, N.; Jain, N.; Rachapalli, V.

    2009-01-01

    The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations

  6. Ergonomics in dental pratice

    Directory of Open Access Journals (Sweden)

    Lucas Quaresemin de Oliveira

    2017-08-01

    Full Text Available The application of ergonomics is critical so that you can get a suitable working environment for professional, it is safe, healthy and comfortable. The objective was to identify whether the dental students followed the principles of ergonomics during clinical visits, evaluating, through photographs, compliance with ergonomic principles applied in dental practice, and finally identify the most affected sites by RSI / WMSDs of students enrolled in the dental clinic of the Faculdade IMED. Snapshots were made and only considered the position of the student operator, the same taken by the researcher using the mobile device. For each clinical procedure were taken two photographs in hidden angles to the student operator so that it did not change its ergonomic position to be observed. After obtaining the photos, they were evaluated and classified in scores from 0 to 3 according to the adequacy of the work placement, and then inserted into Excel and later in a database (SPSS 15.0. The following work is a cross-sectional, observational study, they were conducted in dental clinics IMED college. Among the 66 respondents, 14 were male and 52 female. It was found that 57 (86,3% reported feeling pain somewhere in the body, being the most affected sites neck (36.4%, and consecutively lower back (30.3% and higher than the back (27.3%. The results of the 63 procedures performed by the photographic shots were classified as “inadequate” in 49 procedures, “partially adequate” in 12 and “impossible to evaluate” in 2 procedures. The research results have shown a high prevalence of musculoskeletal pain and do not follow the ergonomic principles, emphasizing the need for more attention to ergonomics of the students.

  7. Ergonomic sustainability based on the ergonomic maturity level measurement.

    Science.gov (United States)

    Vidal, Mario Cesar; Guizze, Carmen Lucia Campos; Bonfatti, Renato José; Silva e Santos, Marcello

    2012-01-01

    This paper aims at the application of an ergonomic maturity model (EMM), in order to assess the ergonomic sustainability outreach of ergonomic actions. This proposition was motivated by the widespread sensation that the development of the discipline, its educational devices and related practices depends on the attitude of ergonomics practitioners rather than environmental macroergonomic conditions. Maturity modeling in this paper is undertaken as a tool for ergonomic practitioners. Thus, its foundations were uprooted from diverse fields: Clinic Psychology, Quality Management and Project Management. The paper brings about a detailled explanation of this ergonomic maturity tool. The empirical part is fulfilled by the examination - using the EMM - of four emblematic cases excerpted from our research lab ergonomic portfolio.

  8. Ergonomía

    OpenAIRE

    Rodríguez Mondelo, Pedro Manuel

    1999-01-01

    Conté: 1. Fundamentos. 2. Confort y estrés térmico. La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

  9. Loudspeaker handbook

    CERN Document Server

    Eargle, John

    2003-01-01

    The second edition of Loudspeaker Handbook follows the same general outlines as the highly successful first edition and has been augmented and updated in many areas of technology. Most notable are the developments in large-scale, programmable line arrays, distributed mode loudspeakers, and ultrasonic-based audio transduction. Additionally, the core chapters on low frequency systems, system concepts, and horn systems have been expanded to include both more analytical material and a richer array of examples. Much of the success of the first edition has been due to its accessibility both to loudspeaker engineers and to lay technicians working in the field - a point of view the author maintains in the present work. A full understanding of the underlying technology requires a fairly rigorous engineering background through the second year of professional study. At the same time, the generous use of graphs, with their intuitive thrust, will be useful to all readers. Loudspeaker Handbook, Second Edition continues to ...

  10. Implementation of ergonomics in a service unit: challenges and advances.

    Science.gov (United States)

    Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

    2012-01-01

    This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

  11. Nanobiomaterials handbook

    CERN Document Server

    Sitharaman, Balaji

    2011-01-01

    Nanobiomaterials exhibit distinctive characteristics, including mechanical, electrical, and optical properties, which make them suitable for a variety of biological applications. Because of their versatility, they are poised to play a central role in nanobiotechnology and make significant contributions to biomedical research and healthcare. Nanobiomaterials Handbook provides a comprehensive overview of the field, offering a broad introduction for those new to the subject as well as a useful reference for advanced professionals.Analyzing major topics and disciplines in this arena, this volume:

  12. Ergonomic intervention for employed persons with rheumatic conditions.

    Science.gov (United States)

    Allaire, Saralynn J; Backman, Catherine L; Alheresh, Rawan; Baker, Nancy A

    2013-01-01

    Prior articles in this series on employment and arthritis have documented the major impact arthritis and other rheumatic conditions have on employment. As expected, physically demanding job tasks, including hand use, are substantial risk factors for work limitation. Computer use has been increasing. People with arthritis may choose occupations involving extensive computer use to avoid occupations with other physical demands. But studies show many people with arthritis conditions have difficulty using computers.Ergonomic assessment and implementation helps relieve the physical and other demands of jobs. The Ergonomic Assessment Tool for Arthritis (EATA) is specifically for people with arthritis conditions. Since the EATA can be conducted off worksite, it is feasible to use with workers not wishing to disclose their condition to their employer. Available research supports the effectiveness of ergonomic intervention as a viable method to reduce work limitation for persons with arthritis. Some workers will need additional vocational intervention to remain employed long term. However, ergonomic intervention is a useful first step, as it promotes awareness of arthritis effects on work activities. Assisting workers with arthritis or other rheumatic conditions to use ergonomics to enhance their ability to work well should be an important aspect of managing these conditions.

  13. Editorial | Scott | Ergonomics SA

    African Journals Online (AJOL)

    Ergonomics SA. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 23, No 1 (2011) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT ...

  14. ERGONOMICS AND ROAD SAFETY

    NARCIS (Netherlands)

    BROOKHUIS, K; BROWN, [No Value

    1992-01-01

    Modifications to the design of vehicles and road infrastructures have improved road safety significantly over the past decades, but all such developments depend upon user acceptance and institutional backing for their success. New R&D programmes combining ergonomic and engineering approaches are

  15. Ergonomics research methods

    Science.gov (United States)

    Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

    1973-01-01

    Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

  16. The impact of ergonomics

    NARCIS (Netherlands)

    Koningsveld, E.A.P.

    2009-01-01

    Ergonomists offer services to organizations. The goal of their work is to provide safety and health at work in combination with a sound human performance. However, the impact of ergonomics efforts is not always as good as ergonomists and human factors specialists want. This chapter aims to support

  17. Meeting diversity in ergonomics

    NARCIS (Netherlands)

    Looze, M.P. de; Pikaar, R.

    2006-01-01

    The plenary lectures from the 16th World Congress on Ergonomics, Maastricht, July 10-14, 2006, have been documented in this special issue. Its theme was ‘Meeting Diversity'. The contributions, ranging from scientific papers to technical notes or short statements, cover different aspects of the

  18. Bad Enough Ergonomics

    Directory of Open Access Journals (Sweden)

    Virve Peteri

    2017-01-01

    Full Text Available The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufacturing process. The article is concerned with how, in the process of producing an office chair, the chair gains an identity of an aesthetic design object and how this comes to mean the reformulation of the idea of ergonomics. The empirical analysis also provides insight into how the somewhat grand discourses of soft capitalism or aesthetic economy are not abstract, but very much grounded in everyday practices of an organization. The article establishes how the vision shared by all the relevant actors invites active, flexible, and cooperative end-users and how the vision also has potential material effects. The research is an ethnographically inspired case study that draws ideas from discursive psychology.

  19. Ergonomic principles for the design of combined drilling and loading machines

    Energy Technology Data Exchange (ETDEWEB)

    Mason, S.; Simpson, G.C.

    1990-08-08

    Underground investigations of development machines have revealed a number of limitations in ergonomics aspects of their design which could influence both the safety and efficiency of the operation. This handbook is intended to provide designers of Combined Drilling and Loading machines with the ergonomic information which can be used to eliminate or reduce such problems. The following criteria were examined: workspace position; operator clearances; operator protection; operator visual communications; operator visual machine monitoring; operator visual safety information; operator seating; operature posture; operator access to workspace; control types; control operating forces; control-response stereotypes; safety controls; control dynamics; control layout; control clearances; control protection; visual displays.

  20. Green ergonomics: definition and scope.

    Science.gov (United States)

    Thatcher, Andrew

    2013-01-01

    This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

  1. Ergonomic analysis of radiopharmaceuticals samples preparation process

    International Nuclear Information System (INIS)

    Gomes, Luciene Betzler C.; Santos, Isaac Luquetti dos; Fonseca, Antonio Carlos C. da; Pellini, Marcos Pinto; Rebelo, Ana Maria

    2005-01-01

    The doses of radioisotopes to be administrated in patients for diagnostic effect or therapy are prepared in the radiopharmacological sector. The preparation process adopts techniques that are aimed to reduce the exposition time of the professionals and the absorption of excessive doses for patients. The ergonomic analysis of this process contributes in the prevention of occupational illnesses and to prevent risks of accidents during the routines, providing welfare and security to the involved users and conferring to the process an adequate working standard. In this context it is perceived relevance of studies that deal with the analysis of factors that point with respect to the solution of problems and for establishing proposals that minimize risks in the exercise of the activities. Through a methodology that considers the application of the concepts of Ergonomics, it is searched the improvement of the effectiveness or the quality and reduction of the difficulties lived for the workers. The work prescribed, established through norms and procedures codified will be faced with the work effectively carried through, the real work, shaped to break the correct appreciation, with focus in the activities. This work has as objective to argue an ergonomic analysis of samples preparation process of radioisotopes in the Setor de Radiofarmacia do Hospital Universitario Clementino Fraga Filho da Universidade Federal do Rio de Janeiro (UFRJ). (author)

  2. Software Support of Modelling using Ergonomic Tools in Engineering

    Directory of Open Access Journals (Sweden)

    Darina Dupláková

    2017-08-01

    Full Text Available One of the preconditions for correct development of industrial production is continuous interconnecting of virtual reality and real world by computer software. Computer software are used for product modelling, creation of technical documentation, scheduling, management and optimization of manufacturing processes, and efficiency increase of human work in manufacturing plants. This article describes the frequent used ergonomic software which helping to increase of human work by error rate reducing, risks factors of working environment, injury in workplaces and elimination of arising occupational diseases. They are categorized in the field of micro ergonomics and they are applicable at the manufacturing level with flexible approach in solving of established problems.

  3. Handbook for Trade and Industrial Shop Teachers.

    Science.gov (United States)

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This handbook is intended to help teachers of pre-employment shop courses in organizing and delivering instruction in both the shop and classroom. Addressed in the guide are the following topics: the instructor's place in the local school organization; the instructor's job (objectives, advisory committees, occupational analysis, shop/classroom and…

  4. Summary of project to develop handbook of human reliability analysis for nuclear power plant operations

    International Nuclear Information System (INIS)

    Swain, A.D.

    1978-01-01

    For the past two years Alan Swain and Henry E. Guttmann, of the Statistics, Computing, and Human Factors Division, Sandia Laboratories, have been developing a handbook to aid qualified persons to evaluate the effect of human error on the availability of engineered safety systems and features in nuclear power plants. The handbook includes a mathematical model, procedures, derived human failure data, and principles of human behavior and ergonomics. The handbook is expanding the human error analyses which were presented in WASH--1400. The work, under the sponsorship of Probabilistic Analysis Staff, NRC Office of Nuclear Regulatory Research (Dr. M.C. Cullingford, NRC Program Manager), is about half completed. An outline of the handbook contents is given in copies of vugraphs (attached), followed by copies of human performance model abstractors (also attached). A first draft of the handbook is scheduled for NRC review by July 1, 1979

  5. Safety handbook

    International Nuclear Information System (INIS)

    1990-01-01

    The purpose of the Australian Nuclear Science and Technology Organization's Safety Handbook is to outline simply the fundamental procedures and safety precautions which provide an appropriate framework for safe working with any potential hazards, such as fire and explosion, welding, cutting, brazing and soldering, compressed gases, cryogenic liquids, chemicals, ionizing radiations, non-ionising radiations, sound and vibration, as well as safety in the office. It also specifies the organisation for safety at the Lucas Heights Research Laboratories and the responsibilities of individuals and committees. It also defines the procedures for the scrutiny and review of all operations and the resultant setting of safety rules for them. ills

  6. A new ergonomically improved lathe.

    Science.gov (United States)

    Harten, G A; Derks, P M

    1975-09-01

    Following frequent complaints of lower back pain by lathe operators, a working group from the Philips Ergonomics Department have produced a model of an ergonomically improved lathe which ensures a healthy posture for the lathe operator at work. The same healthy posture can be adopted whether the operator is sitting or standing. The operator also has a good view of his work. At least two manufacturers have undertaken to develop this ergonomic lathe.

  7. Ergonomics SA: Site Map

    African Journals Online (AJOL)

    Journal Home · Journals · Ergonomics SA · About · Log In · Register · Advanced Search · By Author · By Title. Issues. Current Issue · Archives · Open Journal Systems · Help. ISSN: 1010-2728. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

  8. Ergonomics: case study in a university library

    OpenAIRE

    Daniela Capri; Eliana Maria dos Santos Bahia; Adilson Luiz Pinto

    2012-01-01

    This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics wer...

  9. [Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

    Science.gov (United States)

    Guo, M J; Liu, J J; Yao, H Y

    2016-08-10

    Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

  10. An effective model for ergonomic optimization applied to a new automotive assembly line

    Energy Technology Data Exchange (ETDEWEB)

    Duraccio, Vincenzo [University Niccolò Cusano, Rome Via Don Gnocchi,00166, Roma Italy (Italy); Elia, Valerio [Dept. of Innovation Engineering - University of Salento Via Monteroni, 73100, Lecce (Italy); Forcina, Antonio [University Parthenope, Dep. of Engineering Centro Direzionale - Isola C4 80143 - Naples - Italy (Italy)

    2016-06-08

    An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

  11. An effective model for ergonomic optimization applied to a new automotive assembly line

    International Nuclear Information System (INIS)

    Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

    2016-01-01

    An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

  12. An effective model for ergonomic optimization applied to a new automotive assembly line

    Science.gov (United States)

    Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

    2016-06-01

    An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

  13. Ergonomics in dentistry: experiences of the practice by dental students.

    Science.gov (United States)

    Garcia, P P N S; Gottardello, A C A; Wajngarten, D; Presoto, C D; Campos, J A D B

    2017-08-01

    The aim of this study was to qualitatively evaluate the experiences of students enrolled in the last year of dentistry school with ergonomic practice. This is a qualitative, observational and cross-sectional study, with a non-probabilistic sample design. The sample comprised students enrolled in the last year of dentistry in Araraquara-UNESP (n = 29). The data were collected by means of open semi-structured and individual interviews, captured by a digital voice recorder. The students were interviewed in their own university at a time that was previously scheduled, and care was taken to provide a private and welcoming environment to carry out the interviews. A script containing questions related to practices in ergonomics was prepared at the university. Data analysis was carried out using the qualitative-quantitative Collective Subject Discourse technique with the aid of Qualiquantisoft ® software program. It was found that more than half of the students (58.6%) believe that adopting an ergonomic posture is important to prevent future problems, pain and occupational diseases, and 62.1% of the students confirm having difficulties in adopting ergonomic postures due to the types of treatment required and the regions of the mouth being treated. The main reasons stated for the fact that their colleagues do not adopt ergonomic postures are lack of attention, practice and forgetfulness (44.8%) and difficulty in visualising the operatory field or the procedure performed (27.6%). It is possible to conclude that the students interviewed know ergonomic principles and their importance in occupational health. However, they found it difficult to put these principles into practice. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  14. Workplace ergonomics in lean production environments: A literature review.

    Science.gov (United States)

    Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

    2015-01-01

    Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

  15. An online learning course in Ergonomics.

    Science.gov (United States)

    Weiss, Patrice L Tamar; Schreuer, Naomi; Jermias-Cohen, Tali; Josman, Naomi

    2004-01-01

    For the past two years, the Department of Occupational Therapy at the University of Haifa has offered an online course to third year occupational therapists on the topic of Ergonomics for Health Care Professionals. The development and implementation of this course was funded by the Israeli Ministry of Education. Unique teaching materials, developed and uploaded to the University's server via "High Learn", included interactive and self-directed documents containing graphics, animations, and video clips. Extensive use was made of the discussion forum and survey tools, and students submitted all assignments online. For the final topic, an expert in ergonomics from Boston University delivered a lecture via two-way videoconferencing. The course site included comprehensive library listings in which all bibliographic materials were made available online. Students accessed course materials at the University in a computer classroom and at home via modem. In an accompanying research study, the frequency of student usage of the various online tools was tracked and extensive data were collected via questionnaires documenting students' demographic background, preferred learning style, prior usage of technology, satisfaction with the course and academic achievement. This paper focuses on the results of the research study that examined how the students responded to and coped with teaching material presented and accessed in this format.

  16. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  17. Handbook of systems toxicology

    National Research Council Canada - National Science Library

    Casciano, Daniel A; Sahu, Saura C

    2011-01-01

    "In the first handbook to comprehensively cover the emerging area of systems toxicology, the Handbook of Systems Toxicology provides an authoritative compilation of up-to-date developments presented...

  18. Occupational health hazards in mining: an overview

    Energy Technology Data Exchange (ETDEWEB)

    Donoghue, A.M. [Alcoa World Alumina Australia, Perth, WA (Australia)

    2004-08-01

    This review article outlines the physical, chemical, biological, ergonomic and psychosocial occupational health hazards of mining and associated metallurgical processes. Mining remains an important industrial sector in many parts of the world and although substantial progress has been made in the control of occupational health hazards, there remains room for further risk reduction. This applies particularly to traumatic injury hazards, ergonomic hazards and noise. Vigilance is also required to ensure exposures to coal dust and crystalline silica remain effectively controlled.

  19. Mechanical engineer's handbook

    CERN Document Server

    Marghitu, Dan B

    2001-01-01

    The Mechanical Engineer's Handbook was developed and written specifically to fill a need for mechanical engineers and mechanical engineering students throughout the world. With over 1000 pages, 550 illustrations, and 26 tables the Mechanical Engineer's Handbook is very comprehensive, yet affordable, compact, and durable. The Handbook covers all major areas of mechanical engineering with succinct coverage of the definitions, formulas, examples, theory, proofs, and explanations of all principle subject areas. The Handbook is an essential, practical companion for all mechanic

  20. Fundamentals of ergonomic exoskeleton robots

    NARCIS (Netherlands)

    Schiele, A.

    2008-01-01

    This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a

  1. Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

    Science.gov (United States)

    Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

    2000-10-01

    In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

  2. Semiconductors data handbook

    CERN Document Server

    Madelung, Otfried

    2004-01-01

    This volume Semiconductors: Data Handbook contains frequently used data from the corresponding larger Landolt-Börnstein handbooks in a low price book for the individual scientist working in the laboratory. The Handbook contain important information about a large number of semiconductors

  3. Ergonomic design in ancient Greece.

    Science.gov (United States)

    Marmaras, N; Poulakakis, G; Papakostopoulos, V

    1999-08-01

    Although the science of ergonomics did not actually emerge until the 20th century, there is evidence to suggest that ergonomic principles were in fact known and adhered to 25 centuries ago. The study reported here is a first attempt to research the ergonomics concerns of ancient Greeks, on both a conceptual and a practical level. On the former we present a collection of literature references to the concepts of usability and human-centred design. On the latter, examples of ergonomic design from a variety of fields are analysed. The fields explored here include the design of everyday utensils, the sculpture and manipulation of marble as a building material and the design of theatres. Though hardly exhaustive, these examples serve to demonstrate that the ergonomics principles, in content if not in name, actually emerged a lot earlier than is traditionally thought.

  4. Handbook for Policymackers

    DEFF Research Database (Denmark)

    Jensen, Ulla Højmark

    2016-01-01

    The purpose of the handbook is to support policy makers / decision makers by enabling them to make informed decisions about funding for second chance education or the adoption of its methods into mainstream education. The Handbook makes policy recommendations and provides guidelines to structure...... a quality assurance system that evidences success factors of second chance education and the value of informal learning. The handbook draws on the results of the literature review, the development of the quality assurance system (SMS system), the Teachers Handbook and the Organisational Handbook...

  5. Ergonomics Contribution in Maintainability

    Science.gov (United States)

    Teymourian, Kiumars; Seneviratne, Dammika; Galar, Diego

    2017-09-01

    The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

  6. Colour, vision and ergonomics.

    Science.gov (United States)

    Pinheiro, Cristina; da Silva, Fernando Moreira

    2012-01-01

    This paper is based on a research project - Visual Communication and Inclusive Design-Colour, Legibility and Aged Vision, developed at the Faculty of Architecture of Lisbon. The research has the aim of determining specific design principles to be applied to visual communication design (printed) objects, in order to be easily read and perceived by all. This study target group was composed by a selection of socially active individuals, between 55 and 80 years, and we used cultural events posters as objects of study and observation. The main objective is to overlap the study of areas such as colour, vision, older people's colour vision, ergonomics, chromatic contrasts, typography and legibility. In the end we will produce a manual with guidelines and information to apply scientific knowledge into the communication design projectual practice. Within the normal aging process, visual functions gradually decline; the quality of vision worsens, colour vision and contrast sensitivity are also affected. As people's needs change along with age, design should help people and communities, and improve life quality in the present. Applying principles of visually accessible design and ergonomics, the printed design objects, (or interior spaces, urban environments, products, signage and all kinds of visually information) will be effective, easier on everyone's eyes not only for visually impaired people but also for all of us as we age.

  7. Ergonomics and the occupacional activities of the nursing staff

    OpenAIRE

    Alexandre, Neusa Maria Costa

    1998-01-01

    Esse trabalho discute determinadas condições ergonômicas do trabalho que causam lesões no sistema músculo-esquelético da coluna vertebral, relacionando-as com as atividades ocupacionais da equipe de enfermagem.This paper discusses some of the ergonomics conditions that contribute to the development of musculoskeletal disorders of the vertebral column and relates these conditions to the occupational activities of the nursing staff.

  8. Cookstove handbook

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    Firewood has become a matter of serious concern due to dwindling forest resources coupled with excessive consumption resulting from wasteful and inefficient methods of cooking. Efforts are now being made by various researchers to design more efficient and less expensive cooking stoves. This handbook is a compendium of more than 40 different types of solid-fuel cooking stoves which can be manufactured using locally available materials and skills. The evolution of cooking stoves from open-fire cooking arrangements is described. One chapter is devoted to cooking-stove design considerations, including performance, combustion, oxygen requirements, surrounding air effects, near-by solid-surface effects, the excess-air concept, heat transfer, geometrical efficiency and stove components. The bulk of the document introduces traditionally used and improved cooking-stove designs for wood and charcoal burning in detail providing information on fuels, stove materials, and advantages and disadvantages. A description of 14 different laboratory investigations on efficiency aspects of cooking stoves is presented. Annexes are devoted to the composition and properties of wood, a summary of characteristics of the stoves described in the text, the efficiencies of commonly used cooking stoves with different fuels and a glossary. 82 references.

  9. Montana Proficiency Events Handbook. FHA HERO: Future Homemakers of America toward New Horizons.

    Science.gov (United States)

    McGregor, Linda, Ed.; Quickenden, Sandy, Ed.

    This handbook contains directions for FHA/HERO (Future Homemakers of America/Home Economics Related Occupations) participation activities in Montana. Participation activities are local, state, and national level competitions involving students in vocational home economics programs. The handbook provides a general overview of participation…

  10. Connections between voice ergonomic risk factors in classrooms and teachers' voice production.

    Science.gov (United States)

    Rantala, Leena M; Hakala, Suvi; Holmqvist, Sofia; Sala, Eeva

    2012-01-01

    The aim of the study was to investigate if voice ergonomic risk factors in classrooms correlated with acoustic parameters of teachers' voice production. The voice ergonomic risk factors in the fields of working culture, working postures and indoor air quality were assessed in 40 classrooms using the Voice Ergonomic Assessment in Work Environment - Handbook and Checklist. Teachers (32 females, 8 males) from the above-mentioned classrooms recorded text readings before and after a working day. Fundamental frequency, sound pressure level (SPL) and the slope of the spectrum (alpha ratio) were analyzed. The higher the number of the risk factors in the classrooms, the higher SPL the teachers used and the more strained the males' voices (increased alpha ratio) were. The SPL was already higher before the working day in the teachers with higher risk than in those with lower risk. In the working environment with many voice ergonomic risk factors, speakers increase voice loudness and use more strained voice quality (males). A practical implication of the results is that voice ergonomic assessments are needed in schools. Copyright © 2013 S. Karger AG, Basel.

  11. Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

    Science.gov (United States)

    Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

    2012-01-01

    Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

  12. Fundamentals of ergonomic exoskeleton robots

    OpenAIRE

    Schiele, A.

    2008-01-01

    This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a new theoretical framework for analyzing physical human robot interaction (pHRI) with exoskeletons, and (2) a clear set of design rules of how to build wearable, portable exoskeletons to easily and...

  13. Ergonomic Improvements for Foundries; FINAL

    International Nuclear Information System (INIS)

    Frank Peters; Patrick Patterson

    2002-01-01

    The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products

  14. Ergonomics in the office environment

    Science.gov (United States)

    Courtney, Theodore K.

    1993-01-01

    Perhaps the four most popular 'ergonomic' office culprits are: (1) the computer or visual display terminal (VDT); (2) the office chair; (3) the workstation; and (4) other automated equipment such as the facsimile machine, photocopier, etc. Among the ergonomics issues in the office environment are visual fatigue, musculoskeletal disorders, and radiation/electromagnetic (VLF,ELF) field exposure from VDT's. We address each of these in turn and then review some regulatory considerations regarding such stressors in the office and general industrial environment.

  15. WORK PRECARIOUSNESS: ERGONOMIC RISKS TO OPERATORS OF MACHINES ADAPTED FOR FOREST HARVESTING

    Directory of Open Access Journals (Sweden)

    Stanley Schettino

    Full Text Available ABSTRACT This study aimed to assess different types of machines adapted for mechanized forest harvesting activities in order to quantify the degree of compliance with ergonomic principles applicable to forest machines, as well as the ergonomic risks to which workers are exposed. The following machines were evaluated: a feller buncher adapted into a wheel loader; a mini skidder coupled to an agricultural tractor; and a forest loader adapted to an agricultural tractor; operating in the states of Paraná and Minas Gerais. Biomechanical working conditions were assessed by applying a checklist for simplified assessment of the workplace biomechanical conditions. The forced postures assessment was performed using the REBA - "Rapid Entire Body Assessment" method. In turn, ergonomic classification was through guidelines contained in the ergonomic classification manual "Ergonomic Guidelines for Forest Machines". Moreover, the environmental factors noise, temperature and vibration to which the operators of these machines were exposed were assessed. The results showed all assessed machines had ergonomic standards below those indicated in all assessed aspects, mainly related to access and dimensions of the workplace, need to adopt forced postures during working hours, and exposure to environmental factors assessed above tolerance limits. It is concluded that machines adapted for use in forest harvesting processes have shown significant gaps in relation to ergonomic aspects, presenting high and imminent risk of development of occupational diseases in their operators.

  16. The FITS model office ergonomics program: a model for best practice.

    Science.gov (United States)

    Chim, Justine M Y

    2014-01-01

    An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

  17. Ergonomics, education and children: a personal view.

    Science.gov (United States)

    Woodcock, A

    2007-10-01

    Educational ergonomics - the teaching of ergonomics and the design of environments where ergonomics teaching and learning might occur - has received little attention from ergonomists. This paper first describes the roots of the author's interest and research in educational ergonomics; second it provides a personal view of the opportunities and challenges posed by the two streams of educational ergonomics; and lastly it considers the implications of teaching ergonomics to children in terms of their personal development, the design of schools and the impact such initiatives might have on wider societal problems.

  18. FINODEX Handbook for Entrepreneurs

    DEFF Research Database (Denmark)

    The handbook provides short introductions to necessary knowledge for applicants in the two calls in October 2014 and June 2015 where they can present an idea for product development and apply for up to 10,000 Euro. Furthermore, the handbook is relevant for the next phase, where the selected approx....... 50 projects elaborate detailed technical and market plans. Last, the handbook provides links to further study and information about how to get help in later phases....

  19. Energy Efficiency Governance: Handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    This handbook has been written to assist EE practitioners, government officials and stakeholders to establish effective EE governance structures for their country. The handbook provides readers with relevant information in an accessible format that will help develop comprehensive and effective governance mechanisms. For each of the specific topics dealt with (see Figure 1 in the Handbook), the IEA offers guidelines for addressing issues, or directs readers to examples of how such issues have been dealt with by specific countries.

  20. The biodiesel handbook

    National Research Council Canada - National Science Library

    Knothe, Gerhard; Krahl, Jurgen; Van Gerpen, Jon Harlan

    2010-01-01

    .... The Biodiesel Handbook delivers solutions to issues associated with biodiesel feedstocks, production issues, quality control, viscosity, stability, applications, emissions, and other environmental...

  1. Geothermal handbook

    Science.gov (United States)

    1976-01-01

    The Bureau of Land Management offered over 400,000 hectares (one million acres) for geothermal exploration and development in 1975, and figure is expected to double this year. The Energy Research and Development Administration hopes for 10-15,000 megawatts of geothermal energy by 1985, which would require, leasing over 16.3 million hectares (37 million acres) of land, at least half of which is federal land. Since there is an 8 to 8-1/2 year time laf between initial exploration and full field development, there would have to be a ten-fold increase in the amount of federal land leased within the next three years. Seventy percent of geothermal potential, 22.3 million hectares (55 million acres), is on federal lands in the west. The implication for the Service are enormous and the problems immediate. Geothermal resource are so widespread they are found to some extent in most biomes and ecosystems in the western United States. In most cases exploitation and production of geothermal resources can be made compatible with fish and wildlife management without damage, if probable impacts are clearly understood and provided for before damage has unwittingly been allowed to occur. Planning for site suitability and concern with specific operating techniques are crucial factors. There will be opportunities for enhancement: during exploration and testing many shallow groundwater bodies may be penetrated which might be developed for wildlife use. Construction equipment and materials needed for enhancement projects will be available in areas heretofore considered remote projects will be available in areas heretofore considered remote by land managers. A comprehensive knowledge of geothermal development is necessary to avoid dangers and seize opportunities. This handbook is intended to serve as a working tool in the field. It anticipated where geothermal resource development will occur in the western United States in the near future. A set of environmental assessment procedures are

  2. PSA Review Handbook

    International Nuclear Information System (INIS)

    Hallman, Anders; Nyman, Ralph; Knochenhauer, Michael

    2004-05-01

    The Swedish Nuclear Power Inspectorate (SKI) expresses requirements on the performance of PSAs as well as on PSA activities in general in the the regulatory document 'Regulations Concerning Safety in Certain Nuclear Facilities', SKlFS 1998:1. The follow-up of these activities is part of the inspection tasks of the SKI. In view or this, there is a need for documented guidelines on now to perform these inspections and reviews. The SKI PSA Review Handbook is intended to be a support in the SKI inspection and control of the PSA activities or the licensees. These PSA activities include both the organisation and working procedures of the licensee, the layout and contents of the PSA, and its areas of application. Using the regulation SKIFS 1998:1 as a starting point, the review handbook presents important aspects to be considered when judging whether a licensee fulfils the requirements on PSA activities, including the performance of PSA:s or PSA applications. The handbook shall also be a guidance for the review of PSA:s. However, the intention of the PSA Review Handbook is not to be a handbook for how a PSA is performed. The PSA Review Handbook is applicable to all types or initiating events and all operating conditions, and has been structured in a way, which stresses the integrated characteristics of PSA in the creation of the risk picture of a plant. The PSA Review Handbook has been based on the requirements for PSA of nuclear power plants, as this is the most extensive application. However, the relevant parts of it are also applicable when analysing other nuclear installations. The PSA Review Handbook is published as a research report as its contents are judged to be of general interest, and the SKI welcomes comments to the handbook. An update or the PSA Review Handbook may be required as experience with the use of the handbook is acquired and if general PSA requirements change

  3. Nonlinear dynamical systems for theory and research in ergonomics.

    Science.gov (United States)

    Guastello, Stephen J

    2017-02-01

    Nonlinear dynamical systems (NDS) theory offers new constructs, methods and explanations for phenomena that have in turn produced new paradigms of thinking within several disciplines of the behavioural sciences. This article explores the recent developments of NDS as a paradigm in ergonomics. The exposition includes its basic axioms, the primary constructs from elementary dynamics and so-called complexity theory, an overview of its methods, and growing areas of application within ergonomics. The applications considered here include: psychophysics, iconic displays, control theory, cognitive workload and fatigue, occupational accidents, resilience of systems, team coordination and synchronisation in systems. Although these applications make use of different subsets of NDS constructs, several of them share the general principles of the complex adaptive system. Practitioner Summary: Nonlinear dynamical systems theory reframes problems in ergonomics that involve complex systems as they change over time. The leading applications to date include psychophysics, control theory, cognitive workload and fatigue, biomechanics, occupational accidents, resilience of systems, team coordination and synchronisation of system components.

  4. State of science: human factors and ergonomics in healthcare.

    Science.gov (United States)

    Hignett, Sue; Carayon, Pascale; Buckle, Peter; Catchpole, Ken

    2013-01-01

    The past decade has seen an increase in the application of human factors and ergonomics (HFE) techniques to healthcare delivery in a broad range of contexts (domains, locations and environments). This paper provides a state of science commentary using four examples of HFE in healthcare to review and discuss analytical and implementation challenges and to identify future issues for HFE. The examples include two domain areas (occupational ergonomics and surgical safety) to illustrate a traditional application of HFE and the area that has probably received the most research attention. The other two examples show how systems and design have been addressed in healthcare with theoretical approaches for organisational and socio-technical systems and design for patient safety. Future opportunities are identified to develop and embed HFE systems thinking in healthcare including new theoretical models and long-term collaborative partnerships. HFE can contribute to systems and design initiatives for both patients and clinicians to improve everyday performance and safety, and help to reduce and control spiralling healthcare costs. There has been an increase in the application of HFE techniques to healthcare delivery in the past 10 years. This paper provides a state of science commentary using four illustrative examples (occupational ergonomics, design for patient safety, surgical safety and organisational and socio-technical systems) to review and discuss analytical and implementation challenges and identify future issues for HFE.

  5. Nanomaterials in the field of design ergonomics: present status.

    Science.gov (United States)

    Chowdhury, Anirban; Sanjog, J; Reddy, Swathi Matta; Karmakar, Sougata

    2012-01-01

    Application of nanotechnology and nanomaterials is not new in the field of design, but a recent trend of extensive use of nanomaterials in product and/or workplace design is drawing attention of design researchers all over the world. In the present paper, an attempt has been made to describe the diverse use of nanomaterials in product and workplace design with special emphasis on ergonomics (occupational health and safety; thermo-regulation and work efficiency, cognitive interface design; maintenance of workplace, etc.) to popularise the new discipline 'nanoergonomics' among designers, design users and design researchers. Nanoergonomics for sustainable product and workplace design by minimising occupational health risks has been felt by the authors to be an emerging research area in coming years. Use of nanomaterials in the field of design ergonomics is less explored till date. In the present review, an attempt has been made to extend general awareness among ergonomists/designers about applications of nanomaterials/nanotechnology in the field of design ergonomics and about health implications of nanomaterials during their use.

  6. An ergonomic task analysis of spinal anaesthesia.

    LENUS (Irish Health Repository)

    Ajmal, Muhammad

    2009-12-01

    Ergonomics is the study of physical interaction between humans and their working environment. The objective of this study was to characterize the performance of spinal anaesthesia in an acute hospital setting, applying ergonomic task analysis.

  7. ERGONOMIC OFFICE POSITION ANALYSIS

    Directory of Open Access Journals (Sweden)

    DUMITRU Bogdan

    2010-07-01

    Full Text Available This paper present the risks faced by people working in the office. In the next pages you will find some methods and suggestions how to prevent the appearance of occupational diseases. These suggestions can help anyone to rearrange his work place in order to make his job more pleasant and healthy.

  8. Procurement Career Management Handbook.

    Science.gov (United States)

    Department of the Treasury, Washington, DC.

    This handbook is the result of the Treasury Department's efforts to increase professionalism among its procurement employees nationwide through its Procurement Career Management Program. First, the scope and objectives of the Procurement Career Management Program are discussed. The remaining sections of the handbook deal with the following program…

  9. A Poetry Handbook.

    Science.gov (United States)

    Oliver, Mary

    Intended to impart the basic ways a poem is constructed, this concise handbook is a prose guide to writing poetry. The handbook talks about meter and rhyme, form and diction, sound and sense, iambs and trochees, couplets and sonnets, and how and why this should matter to any person writing or reading poetry. Interspersing history and analysis with…

  10. Warehouse Sanitation Workshop Handbook.

    Science.gov (United States)

    Food and Drug Administration (DHHS/PHS), Washington, DC.

    This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

  11. Occupational medicine and toxicology

    Directory of Open Access Journals (Sweden)

    Fischer Axel

    2006-02-01

    Full Text Available Abstract This editorial is to announce the Journal of Occupational Medicine and Toxicology, a new Open Access, peer-reviewed, online journal published by BioMed Central. Occupational medicine and toxicology belong to the most wide ranging disciplines of all medical specialties. The field is devoted to the diagnosis, prevention, management and scientific analysis of diseases from the fields of occupational and environmental medicine and toxicology. It also covers the promotion of occupational and environmental health. The complexity of modern industrial processes has dramatically changed over the past years and today's areas include effects of atmospheric pollution, carcinogenesis, biological monitoring, ergonomics, epidemiology, product safety and health promotion. We hope that the launch of the Journal of Occupational Medicine and Toxicology will aid in the advance of these important areas of research bringing together multi-disciplinary research findings.

  12. Ergonomics on the Build Colombian Health of Workers

    Directory of Open Access Journals (Sweden)

    Jairo Ernesto Luna García

    2014-06-01

    Full Text Available The health of workers in Colombia traverses multiple challenges and difficulties, starting from the national, political and economic context, crossroads living social security system and the trends in the world of work. Faced with this situation, the ergonomics as a field of knowledge and action has multiple possibilities of contribution, which depend on not to see this disciplined reduced to a technical dimension, but encourage their contribution within a framework of action located and contextualized. Although it has emphasized the action of ergonomics in its contribu-tion to the prevention of muscle-skeletal disorders, their contribution to the health of workers can be very important, in a setting of search of the labor and social welfare as a complement to the prevention of occupational risks.

  13. Occupational Health and Safety in Ethiopia: A review of Situational ...

    African Journals Online (AJOL)

    kim

    primary education. Commonly observed hazards in the workplace include occupational noise and dust of various ..... ergonomic related health risks such as back pain, eye and body ..... measurements using appropriate time scale and space is.

  14. Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review

    Directory of Open Access Journals (Sweden)

    Simone De Sio

    2018-01-01

    Full Text Available Introduction Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54–93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. Methods This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Results Online research indicated 4188 references: PubMed (2919, Scopus (1257 e Cochrane Library (12. We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each

  15. Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review.

    Science.gov (United States)

    De Sio, Simone; Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

    2018-01-01

    Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54-93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Online research indicated 4188 references: PubMed (2919), Scopus (1257) e Cochrane Library (12). We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each working session and at the end of the working day

  16. Ergonomic design for dental offices.

    Science.gov (United States)

    Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

    2010-01-01

    The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

  17. Ergonomic material-handling device

    Science.gov (United States)

    Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

    2004-08-24

    A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

  18. Ergonomic, psychosocial factors and risks at work in informal mining

    Directory of Open Access Journals (Sweden)

    Milena Nunes Alves de Sousa

    2015-09-01

    Full Text Available The goal of this study was to identify ergonomic and psychosocial factors, and risks at informal work in the mining sector of the State of Paraíba, Brazil, from miners' perspective. A cross-sectional and descriptive study was conducted with 371 informal mining workers. They responded two questionnaires for assessing work performed in three dimensions: ergonomic factors; psychosocial factors; and occupational risks. The scores of the items of each dimension were added so that, the higher the score, the lower workers' satisfaction related to the area investigated. The results indicated that noise was common in the working environment (66%. Most workers (54.7% pointed out that the work was too hard and that it required attention and reasoning (85.7%. The workers emphasized the lack of training for working in mining (59.3% and few of them regarded the maintenance of the workplace as a component to prevent lumbago (32.3%. Risk of accidents was pointed out as the factor that needed increased attention in daily work (56.6%. All occupational risks were mentioned, including physical and chemical risks. There was significant correlation between age and occupational risks, indicating that the greater the age, the greater the perception of harmful agents (ρ = -0.23; p < 0.01. In the end, it was observed that, to a greater or lesser degree, all workers perceived ergonomic and psychosocial factors, and risks in informal mining. Length of service and age were the features that interfered significantly with the understanding of those factors and occupational risks.

  19. Occupational health and the radiographer

    International Nuclear Information System (INIS)

    Stronach, T.

    1990-01-01

    This paper identifies some of the occupational health hazards faced by radiographers in the hospital environment. There has been very little work done in this area in the past, and as the subject is so large this paper can do little other than raise some of the issues . The hazards addressed include: radiation, ergonomics, chemical, environmental, biological, occupational injury and accident, stress. 14 refs., 2 figs

  20. Ergonomics and control room design

    International Nuclear Information System (INIS)

    Williams, J.C.; Story, D.T.

    1987-01-01

    The application of ergonomic principles to the design process and some aspects of the Sizewell B control room is discussed. Also outlined is the management process which ensures that these principles are applied systematically throughout the design development activity and highlights the functional requirements which must also be met in the creation of a total man-machine system package which meets all the technical design criteria. The ergonomics requirements are part of this process and extend into all aspects of design ranging from such matters as workplace organization to environmental factors, social engineering, communications and aesthetics. (author)

  1. The Need to Reevaluate Nonresponding Ergonomic Patients

    Science.gov (United States)

    Scarpa, Philip J.; Field, Steven A.

    1999-01-01

    The Kennedy Space Center (KSC) Environmental Health (EH) contractor performs ergonomic evaluations under its Ergonomic Program. Any KSC employee may request one or the reviewing physician may request one for a patient during a visit to an onsite medical facility. As part of the ergonomic evaluation, recommendations are given to the patient to help reduce any ergonomic problems they experience. The recommendations, if implemented, are successful in the majority of KSC patients; however, a group of patients do not seem to improve. Those who don't improve may be identified by reevaluations, which are performed to implement maximum resolution of ergonomic problems.

  2. Ergonomics and nursing in hospital environments.

    Science.gov (United States)

    Rogers, Bonnie; Buckheit, Kathleen; Ostendorf, Judith

    2013-10-01

    This study describes workplace conditions, the environment, and activities that may contribute to musculoskeletal injuries among nurses, as well as identifies solutions to decrease these risks and improve work-related conditions. The study used a mixed-methods design. Participants included nurses and stakeholders from five hospitals. Several focus groups were held with nurses, walk-throughs of clinical units were conducted, and stakeholder interviews with key occupational health and safety personnel were conducted in each of the five hospitals, as well as with representatives from the American Nurses Association, Veterans Health Administration hospital, and National Institute for Occupational Safety and Health. Several key contributing factors, including the physical environment (e.g., layout and organization of work stations), work organization and culture (e.g., heavy workload, inadequate staffing, lack of education), and work activities (e.g., manual lifting of patients, lack of assistive devices), were identified. Recommendations included the need for a multifaceted and comprehensive approach to developing a sound ergonomics program. Copyright 2013, SLACK Incorporated.

  3. Ergonomic risk assessment by REBA method

    Directory of Open Access Journals (Sweden)

    A. Hassanzadeh

    2007-09-01

    Full Text Available Background and aims   Awkward posture has been recognized as one of the important risk factors of work-related musculoskeletal disorders (WMSD. The current study aimed at determining ergonomic risk level, WMSDs ratio and exploring working postures contribution to WMSD. During the study, working postures were phased and then they were scored using the REBAtool from observing the work.   Methods   To perform the study, workers of a home appliances manufacturing factory were  assessed. In order to collecting required data, each part of the body was scored and work frequency,  load/force, coupling were considered to achieve a REBA score. Nordic Questionnaire was used  to determining WMSD ratio and its relationship whit REBA score. 231 working phases were  assessed and 13761 questions using Nordic Questionnaire were answered. Percentage of the workers in press, spot welding, grinding, cutting, assembling, and painting was 15.8, 21.6, 25.9, 34.5, 89.9%, respectively. Workers were 18-54 years old and their work recording average was 52  month.   Results   REBAscore was 4-13 in under study tasks. REBA score = 9 had the most frequency  (20% and REBA score =13 had the least frequency (1.4%. Risk level in press, cutting, and  painting was high (25.5, 100, 68.2% cases. This shows that cutting has the highest risk level. On the other hand 38.5% of the workers in past 12 month had problem in different parts of their body. Totally 11.7% of the workers had problem in neck, 19.4$ in leg, 10.7% in foot, 82.5% in lower back,  87.6% in upper back and 7.8% in shoulders.10.7% of the workers had previous illness that 8.7%  of them were non occupational and 1.9% were caused their previous jobs. The REBAscore mean  and ergonomic risk level is not equal in tasks (p-value0. Action level was necessary  soon in others.   Conclusion   Risk level should be reduced specially in cutting. The heavy workload and  working height poor design, awkward

  4. ERGONOMIC DESIGN OF AIRCRAFT COCKPIT

    Directory of Open Access Journals (Sweden)

    CÎMPIAN Ionuţ

    2012-09-01

    Full Text Available This paper presents a model for an ergonomic design of an aircraft cockpit with the specification and verification with respect to the new European Aviation Safety Agency (EASA and Federal Aviation Administration (FAA requirements. The goal is to expressing the concepts on which the aircraft cockpit design are based.

  5. ERGONOMIC DESIGN OF AIRCRAFT COCKPIT

    Directory of Open Access Journals (Sweden)

    CÎMPIAN Ionuţ

    2011-06-01

    Full Text Available This paper presents a model for an ergonomic design of an aircraft cockpit with the specification and verification with respect to the new European Aviation Safety Agency (EASA and Federal Aviation Administration (FAA requirements. The goal is to expressing the concepts on which the aircraft cockpit design is based.

  6. Ergonomic design for operator flexibility

    International Nuclear Information System (INIS)

    Pope, R.H.

    1980-01-01

    The Three Mile Island accident highlighted the importance of ergonomic design of control rooms. Emphasis has been on a reappraisal of the reactor/operator interface, but in the United Kingdom the CEGB maintains that safe efficient operation needs a centralised information system optimised for all control room staff. (author)

  7. ERGONOMICS ABSTRACTS 48983-49619.

    Science.gov (United States)

    Ministry of Technology, London (England). Warren Spring Lab.

    THE LITERATURE OF ERGONOMICS, OR BIOTECHNOLOGY, IS CLASSIFIED INTO 15 AREAS--METHODS, SYSTEMS OF MEN AND MACHINES, VISUAL AND AUDITORY AND OTHER INPUTS AND PROCESSES, INPUT CHANNELS, BODY MEASUREMENTS, DESIGN OF CONTROLS AND INTEGRATION WITH DISPLAYS, LAYOUT OF PANELS AND CONSOLES, DESIGN OF WORK SPACE, CLOTHING AND PERSONAL EQUIPMENT, SPECIAL…

  8. Java EE 7 handbook

    CERN Document Server

    Pilgrim, Peter A

    2013-01-01

    Java EE 7 Handbook is an example based tutorial with descriptions and explanations.""Java EE 7 Handbook"" is for the developer, designer, and architect aiming to get acquainted with the Java EE platform in its newest edition. This guide will enhance your knowledge about the Java EE 7 platform. Whether you are a long-term Java EE (J2EE) developer or an intermediate level engineer on the JVM with just Java SE behind you, this handbook is for you, the new contemporary Java EE 7 developer!

  9. Handbook of energy

    CERN Document Server

    Cleveland, Cutler J

    2013-01-01

    Handbook of Energy, Volume II: Chronologies, Top Ten Lists, and Word Clouds draws together a comprehensive account of the energy field from the prestigious and award-winning authors of the Encyclopedia of Energy (2004), The Dictionary of Energy, Expanded Edition (2009), and the Handbook of Energy, Volume I (2013). Handbook of Energy, Volume II takes the wealth of information about historical aspects of energy spread across many books, journals, websites, disciplines, ideologies, and user communities and synthesizes the information in one central repository. This book meets the needs of a di

  10. Ergonomics: A Commonsense Activity That Can Save Schools Money.

    Science.gov (United States)

    Fleer, Paul; Gauthier-Green, Erin

    2002-01-01

    Describes the use of ergonomics to reduce work-related musculoskeletal disorders such as back pain, tendonitis, and carpal tunnel syndrome. Describes ergonomics and how to identify ergonomic problems, conduct a job hazard analysis, and develop solutions. Also lists common ergonomic errors in schools. Provides an ergonomic checklist for employees…

  11. Introduction: Green Building Handbook

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-08-01

    Full Text Available By recognising the specific environmental challenges facing South Africa, mindful of the government‘s commitment to reducing South Africa‘s Greenhouse gas emissions, and acknowledging the need to build social cohesion, the Green Building Handbook...

  12. Metallic Fuels Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Janney, Dawn E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Burkes, Douglas E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cole, James I. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fielding, Randall S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Frank, Steven M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hartmann, Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hyde, Timothy A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Keiser, Jr., Dennis D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kennedy, J. Rory [Idaho National Lab. (INL), Idaho Falls, ID (United States); Maddison, Andrew [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mariani, Robert D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Middlemas, Scott C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); O' Holleran, Thomas P. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sencer, Bulent H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Squires, Leah N. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-08-07

    This is not a typical External Report--It is a Handbook. No Abstract is involved. This includes both Parts 1 and 2. The Metallic Fuels Handbook summarizes currently available information about phases and phase diagrams, heat capacity, thermal expansion, and thermal conductivity of elements and alloys in the U-Pu-Zr-Np-Am-La-Ce-Pr-Nd system. Although many sections are reviews and updates of material in previous versions of the Handbook [1, 2], this revision is the first to include alloys with four or more elements. In addition to presenting information about materials properties, the handbook attempts to provide information about how well each property is known and how much variation exists between measurements. Although it includes some results from models, its primary focus is experimental data.

  13. Construction project management handbook.

    Science.gov (United States)

    2012-03-01

    The purpose of the FTA Construction Project Management Handbook is to provide guidelines for use by public transit agencies (Agen-cies) undertaking substantial construction projects, either for the first time or with little prior experience with cons...

  14. Handbook of nanomedicine

    CERN Document Server

    Jain, Kewal K

    2012-01-01

    In its updated and reorganized second edition, this handbook captures the latest advances in nanomedicine applied to researching the pathomechanism of disease, refining molecular diagnostics, and aiding in the discovery, development, and delivery of drugs.

  15. Handbook of antenna technologies

    CERN Document Server

    Liu, Duixian; Nakano, Hisamatsu; Qing, Xianming; Zwick, Thomas

    2016-01-01

    The Handbook of Antenna Technologies aims to present the rapid development of antenna technologies, particularly in the past two decades, and also showcasing the newly developed technologies and the latest applications. The handbook will provide readers with the comprehensive updated reference information covering theory, modeling and optimization methods, design and measurement, new electromagnetic materials, and applications of antennas. The handbook will widely cover not only all key antenna design issues but also fundamentals, issues related to antennas (transmission, propagation, feeding structure, materials, fabrication, measurement, system, and unique design challenges in specific applications). This handbook will benefit the readers as a full and quick technical reference with a high-level historic review of technology, detailed technical descriptions and the latest practical applications.

  16. Toxic substances handbook

    Science.gov (United States)

    Junod, T. L.

    1979-01-01

    Handbook, published in conjunction with Toxic Substances Alert Program at NASA Lewis Research Center, profiles 187 toxic chemicals in their relatively pure states and include 27 known or suspected carcinogens.

  17. Incorporating organisational safety culture within ergonomics practice.

    Science.gov (United States)

    Bentley, Tim; Tappin, David

    2010-10-01

    This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

  18. Handbook on Decision Making

    CERN Document Server

    Jain, Lakhmi C

    2010-01-01

    The present "Volume 1: Techniques and Applications" of the "Handbook on Decision Making" presents a useful collection of AI techniques, as well as other complementary methodologies, that are useful for the design and development of intelligent decision support systems. Application examples of how these intelligent decision support systems can be utilized to help tackle a variety of real-world problems in different domains, such as business, management, manufacturing, transportation and food industries, and biomedicine, are presented. The handbook includes twenty condensed c

  19. Soviet Space Program Handbook.

    Science.gov (United States)

    1988-04-01

    in advance and some events were even broadcast live. Immediately following the first success- ful launch of their new Energia space launch vehicle in...early 1988. Just as a handbook written a couple of years ago would need updating with Mir, Energia , and the SL-16, this handbook will one day need up...1986. Johnson, Nicholas L. The Soviet Year in Space 1983. Colorado Springs, CO: Teledyne Brown Engineering, 1984. Lawton, A. " Energia - Soviet Super

  20. Knowledge Service Engineering Handbook

    CERN Document Server

    Kantola, Jussi

    2012-01-01

    Covering the emerging field of knowledge service engineering, this groundbreaking handbook outlines how to acquire and utilize knowledge in the 21st century. Drawn on the expertise of the founding faculty member of the world's first university knowledge engineering service department, this book describes what knowledge services engineering means and how it is different from service engineering and service production. Presenting multiple cultural aspects including US, Finnish, and Korean, this handbook provides engineering, systemic, industry, and consumer use viewpoints to knowledge service sy

  1. DOE handbook electrical safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    Electrical Safety Handbook presents the Department of Energy (DOE) safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety guidance and information for DOE installations to effect a reduction or elimination of risks associated with the use of electrical energy. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  2. Handbook of Social Capital

    DEFF Research Database (Denmark)

    The Handbook of Social Capital balances the ‘troika' of sociology, political science and economics by offering important contributions to the study of bonding and bridging social capital networks. This inter-disciplinary Handbook intends to serve as a bridge for students and scholars within all...... the social sciences. The contributors explore the different scientific approaches that are all needed if international research is to embrace both the bright and the more shadowy aspects of social capital....

  3. Harwell emergency handbook

    International Nuclear Information System (INIS)

    1986-12-01

    The Harwell Laboratory Emergency Handbook 1987 contains emergency procedures to deal with any incident which might occur at AERE Harwell involving radioactive or toxic material releases. The Handbook gives details of the duties of members of the Site Emergency Organization and other key members of staff, the methods by which incidents are controlled, the communication links and liaison arrangements with other organizations and the possible consequences and actions that may be needed following an emergency. (UK)

  4. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  5. Handbook of Technical Communication

    OpenAIRE

    Mehler , Alexander; Romary , Laurent; Gibbon , Dafydd

    2012-01-01

    International audience; The handbook "Technical Communication" brings together a variety of topics which range from the role of technical media in human communication to the linguistic, multimodal enhancement of present-day technologies. It covers the area of computer-mediated text, voice and multimedia communication as well as of technical documentation. In doing so, the handbook takes professional and private communication into account. Special emphasis is put on technical communication bas...

  6. Rechargeable batteries applications handbook

    CERN Document Server

    1998-01-01

    Represents the first widely available compendium of the information needed by those design professionals responsible for using rechargeable batteries. This handbook introduces the most common forms of rechargeable batteries, including their history, the basic chemistry that governs their operation, and common design approaches. The introduction also exposes reader to common battery design terms and concepts.Two sections of the handbook provide performance information on two principal types of rechargeable batteries commonly found in consumer and industrial products: sealed nickel-cad

  7. 2016 Annual Meeting of the German Human Factors and Ergonomics Society

    CERN Document Server

    Duckwitz, Sönke; Flemisch, Frank; Frenz, Martin; Kuz, Sinem; Mertens, Alexander; Mütze-Niewöhner, Susanne

    2017-01-01

    These proceedings summarize the best papers in each research area represented at the 2016 Annual Meeting of the German Human Factors and Ergonomics Society, held at Institute of Industrial Engineering and Ergonomics of RWTH Aachen University from March 2-4. The meeting featured more than 200 presentations and 36 posters reflecting the diversity of subject matter in the field of human and industrial engineering. This volume addresses human factors and safety specialists, industrial engineers, work and organizational psychologists, occupational medicines as well as production planners and design engineers.

  8. A Critical Study on the Underground Environment of Coal Mines in India-an Ergonomic Approach

    Science.gov (United States)

    Dey, Netai Chandra; Sharma, Gourab Dhara

    2013-04-01

    Ergonomics application on underground miner's health plays a great role in controlling the efficiency of miners. The job stress in underground mine is still physically demanding and continuous stress due to certain posture or movement of miners during work leads to localized muscle fatigue creating musculo-skeletal disorders. A good working environment can change the degree of job heaviness and thermal stress (WBGT values) can directly have the effect on stretch of work of miners. Out of many unit operations in underground mine, roof bolting keeps an important contribution with regard to safety of the mine and miners. Occupational stress of roof bolters from ergonomic consideration has been discussed in the paper.

  9. NASA Systems Engineering Handbook

    Science.gov (United States)

    Hirshorn, Steven R.; Voss, Linda D.; Bromley, Linda K.

    2017-01-01

    The update of this handbook continues the methodology of the previous revision: a top-down compatibility with higher level Agency policy and a bottom-up infusion of guidance from the NASA practitioners in the field. This approach provides the opportunity to obtain best practices from across NASA and bridge the information to the established NASA systems engineering processes and to communicate principles of good practice as well as alternative approaches rather than specify a particular way to accomplish a task. The result embodied in this handbook is a top-level implementation approach on the practice of systems engineering unique to NASA. Material used for updating this handbook has been drawn from many sources, including NPRs, Center systems engineering handbooks and processes, other Agency best practices, and external systems engineering textbooks and guides. This handbook consists of six chapters: (1) an introduction, (2) a systems engineering fundamentals discussion, (3) the NASA program project life cycles, (4) systems engineering processes to get from a concept to a design, (5) systems engineering processes to get from a design to a final product, and (6) crosscutting management processes in systems engineering. The chapters are supplemented by appendices that provide outlines, examples, and further information to illustrate topics in the chapters. The handbook makes extensive use of boxes and figures to define, refine, illustrate, and extend concepts in the chapters.

  10. Ergonomic Work Station Design to Improve Workload Quality and Productivity of the Craffsmen

    Science.gov (United States)

    Widana, IK; Wayan Sumetri, Ni; Ketut Sutapa, I.

    2018-01-01

    This study is a research on ergonomics field, especially for ergonomics work station. This research begins with direct observation on the work process of carving craft. In addition to the aspect of occupational health, the stages of the process are also subject matter in the effort to solve the research problem. In accordance with the master plan of research of Bali State Polytechnic, problem solving will be focused on human aspect and utilization of appropriate technology, so that will get the work process ENASEP (effective, convenient, safe, healthy, efficient and productive) Technical easy to work, economical, ergonomic, energy saving, environmentally friendly and in accordance with the trend of the era. The method to be used in this research is experimental with the same subject design. Involves 9 samples who perform activities on conditions before and after treatment. Data on environmental conditions were analyzed by Mann-Whitney test. Data on work productivity and workload were tested with two pair sample t-test at a significance level of 5%. The results showed that by utilizing ergonomic work stations, occupational health indicators such as workload showed better signs, indicated by decreased the workload. In addition to occupational health, productivity indicators also increased significantly.

  11. Mobile retroreflectivity best practices handbook.

    Science.gov (United States)

    2009-07-01

    This handbook documents best practices related to proper use of the mobile retroreflectometer, sampling of : sites for data collection, and handling of mobile retroreflectivity data. The best practices described in this : handbook are derived from th...

  12. Travel time data collection handbook

    Science.gov (United States)

    1998-03-01

    This Travel Time Data Collection Handbook provides guidance to transportation : professionals and practitioners for the collection, reduction, and presentation : of travel time data. The handbook should be a useful reference for designing : travel ti...

  13. Novel ergonomic postural assessment method (NERPA) using product-process computer aided engineering for ergonomic workplace design.

    Science.gov (United States)

    Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

    2013-01-01

    Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method's usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method.

  14. Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

    Science.gov (United States)

    Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

    2013-01-01

    Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

  15. Radiation safety handbook for ionizing and nonionizing radiation

    International Nuclear Information System (INIS)

    Kincaid, C.B.

    1976-10-01

    The Handbook is directed primarily to users of radiation sources throughout the Food and Drug Administration. Specific precautions regarding the possession and use of radiation sources in meeting the Agency's objectives are an inherent responsibility of all employees. In addition, the increased emphasis on occupational safety and health and the responsibilities placed on the Department by Public Law and Executive Order make it mandatory that all organizational levels and activities conform to the intent of this Handbook. The policies and procedures described in this document apply to all Agency operators and activities and are intended to protect employees and the general public

  16. Good ergonomic practices in a terminal facility

    Energy Technology Data Exchange (ETDEWEB)

    Anjos, Luciana Mattos dos; Curty, Adriana Favacho [CHEMTECH, Rio de Janeiro, RJ (Brazil); Franca, Guilherme Foerster do Monte; Jardino, Alessandro Neto [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Ergonomics is the technological design of the interplay between men, machines and environment in order to make labor activities more pleasant, profitable and functional. This article analyses the importance of ergonomic issues in process terminal plants and facilities, since the conceptual design stage until the detail engineering design. The ergonomic solutions are compared with practices that are current in engineering design plants nowadays. It will be shown how an inadequate ergonomic design often leads to accessibility problems and non-effectiveness during plant operation and dangers in emergency situations. The way perform an ergonomic design is to integrate the various disciplines that are involved in all stages of the design plant. The earlier the ergonomic design is implemented the better are the results in cost reduction, since later design modifications are more time-consuming and expensive. (author)

  17. Physical Ergonomics and Musculoskeletal Disorders: What's hot? What's cool?

    NARCIS (Netherlands)

    Beek, A.J. van der; IJmker, S.

    2007-01-01

    This chapter discusses the physical ergonomics and musculoskeletal disorders and summarizes the Triennial International Ergonomics Association (IEA) World Congress 2006-IEA2006-highlights on physical ergonomics and work-related MusculoSkeletal Disorders (MSDs). Two general trends are observed.

  18. 1994 Ergonomics Program Quality Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Longbotham, L.; Miller, D.P.

    1995-06-01

    A telephone survey was conducted to evaluate the quality of service provided to the primary customers of the Corporate Ergonomics Group (CEG). One hundred clients who received services between October 1993 and June 1994 were asked questions on their expectations, implementation of ergonomic recommendations, follow-ups, time required, productivity improvements, symptom alleviation, and satisfaction. Suggestions on how processes could be improved were also solicited. In general, recommendations are being implemented, worksite evaluations are going smoothly, and customers are satisfied with the process. The CEG was pleased to learn that half of the people who implemented recommendations experienced improvements in productivity, and four out of five symptomatic customers experienced partial or complete relief. Through analysis of the data and by studying clients` suggestions for process improvement, the CEG has developed a strategy for changing and improving current procedures and practices. These plans can be found in the last section of this report.

  19. Ergonomic applications to dental practice

    Directory of Open Access Journals (Sweden)

    Shipra Gupta

    2011-01-01

    Full Text Available The term "work-related musculoskeletal disorders (WMSDs," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.

  20. 78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

    Science.gov (United States)

    2013-08-27

    ... air quality issues; food/beverage carts; and ergonomics. OSHA's noise, bloodborne pathogens, and... exposure, cabin air quality, food and beverage cart and ergonomic issues are not being considered at this... comments from the National Institute for Occupational Safety and Health that cited several studies it...

  1. The Influence of Ergonomics Training on Employee Behavior at Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Puckett, Leslie Guthrie [Colorado State Univ., Fort Collins, CO (United States)

    2001-01-01

    A survey of employee behavior was conducted at Los Alamos National Laboratory (LANL). The objective of this study was to evaluate the prevalence of ergonomic behavior that decreased the chance of having a work-related musculoskeletal disorder (WMSD) among employees. The null hypothesis was tested to determine if there was a significant difference in ergonomic behavior between trained and untrained employees. The LANL employees were stratified by job series and then randomly selected to participate. The data were gathered using an electronic self-administered behavior questionnaire. The study population was composed of 6931 employees, and the response rate was 48%. The null hypothesis was rejected for twelve out of fifteen questions on the questionnaire. Logistic regression results indicate that the trained participants were more likely to report the risk-avoiding behavior, which supported the rejection of the null hypothesis for 60% of the questions. There was a higher frequency that the beneficial or risk-avoiding behavior was reported by the uninjured participants. Job series analysis revealed that ergonomics is an important issue among participants from all the job series. It also identified the occupational specialist classification (an administrative job), as the job series with the most occurrences of undesired ergonomic behaviors. In conclusion, there was a significant difference between the trained and untrained participants of the beneficial ergonomic behavior in the reported risk reducing behaviors.

  2. The application of participatory ergonomics in a healthcare setting in Hong Kong.

    Science.gov (United States)

    Lee, Edwin W C; Fok, Joan P C; Lam, Augustine T; Law, Rainbow K Y; Szeto, Grace P Y; Li, Philip P K

    2014-01-01

    Work-related musculoskeletal disorders (WRMDs) are recognized as a major source of significant pain and disability in the healthcare sector. However, they are preventable if appropriate surveillance and intervention programs are implemented. The purpose of this paper is to describe the holistic ergonomic approach that was used to address the multifactorial problems encountered by healthcare workers in their daily work. Using participatory ergonomics, healthcare workers in this study teamed up with management and staff with expertise in ergonomic analysis, design, and implementation of remedies. Selected participatory ergonomic intervention programs targeted at an organizational level are elaborated. Interventions included pre-work stretching, workplace surveillance at a psychiatric department, on-site ergonomic teaching for community nurses, and display screen equipment consultancy. Changes in workplace design, equipment re-arrangement, awareness of proper posture, and adoption of good work practices all play important roles in reducing musculoskeletal disorders among healthcare workers. Prompt occupational medicine and rehabilitation services were also provided to complement the work disability prevention process. The impact of the various intervention programs on staff health, costs and productivity of the organization are simultaneously discussed.

  3. Wrong postural hygiene and ergonomics in dental students of the University of Valencia (Spain) (part I).

    Science.gov (United States)

    Cervera-Espert, J; Pascual-Moscardó, A; Camps-Alemany, I

    2018-02-01

    Failure to adopt a correct working posture can lead to occupational diseases. Evaluate knowledge in relation to ergonomics about BHOP concept and its application to routine clinical practice amongst undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain). A study based on interviews of undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain) was carried out. The information from a total of 336 interviews was used for the statistical analysis, differentiating according to gender and academic year: knowledge of ergonomics, pain prevalence and antecedents, assessment of the possible necessity for improved training in ergonomics, and evaluation of postural hygiene. Only 28.6% of the students were found to sit correctly in the dentist chair. Furthermore, in the opinion of the students, very few subjects during the career afforded adequate teaching in relation to ergonomics and working posture. The analysis of postural hygiene showed great variability. There were no significant differences in posture between males and females, although some incorrect postures appeared to be associated with the academic year (Ppostural hygiene were noted on progressing from one academic year to the next. The students in our study were not familiar with the principles of ergonomics and did not sit correctly in the dentist chair. Improved training in this field is required in dental school. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Evidence-based ergonomics education: Promoting risk factor awareness among office computer workers.

    Science.gov (United States)

    Mani, Karthik; Provident, Ingrid; Eckel, Emily

    2016-01-01

    Work-related musculoskeletal disorders (WMSDs) related to computer work have become a serious public health concern. Literature revealed a positive association between computer use and WMSDs. The purpose of this evidence-based pilot project was to provide a series of evidence-based educational sessions on ergonomics to office computer workers to enhance the awareness of risk factors of WMSDs. Seventeen office computer workers who work for the National Board of Certification in Occupational Therapy volunteered for this project. Each participant completed a baseline and post-intervention ergonomics questionnaire and attended six educational sessions. The Rapid Office Strain Assessment and an ergonomics questionnaire were used for data collection. The post-intervention data revealed that 89% of participants were able to identify a greater number of risk factors and answer more questions correctly in knowledge tests of the ergonomics questionnaire. Pre- and post-intervention comparisons showed changes in work posture and behaviors (taking rest breaks, participating in exercise, adjusting workstation) of participants. The findings have implications for injury prevention in office settings and suggest that ergonomics education may yield positive knowledge and behavioral changes among computer workers.

  5. Springer Handbook of Acoustics

    CERN Document Server

    Rossing, Thomas D

    2007-01-01

    Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and others. The Springer Handbook of Acoustics is an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents spanning: animal acoustics including infrasound and ultrasound, environmental noise control, music and human speech and singing, physiological and psychological acoustics, architectural acoustics, physical and engineering acoustics, signal processing, medical acoustics, and ocean acoustics. This handbook reviews the most important areas of acoustics, with emphasis on current research. The authors of the various chapters are all experts in their fields. Each chapter is richly illustrated with figures and tables. The latest rese...

  6. Springer handbook of robotics

    CERN Document Server

    Khatib, Oussama

    2016-01-01

    The second edition of this handbook provides a state-of-the-art cover view on the various aspects in the rapidly developing field of robotics. Reaching for the human frontier, robotics is vigorously engaged in the growing challenges of new emerging domains. Interacting, exploring, and working with humans, the new generation of robots will increasingly touch people and their lives. The credible prospect of practical robots among humans is the result of the scientific endeavour of a half a century of robotic developments that established robotics as a modern scientific discipline. The ongoing vibrant expansion and strong growth of the field during the last decade has fueled this second edition of the Springer Handbook of Robotics. The first edition of the handbook soon became a landmark in robotics publishing and won the American Association of Publishers PROSE Award for Excellence in Physical Sciences & Mathematics as well as the organization’s Award for Engineering & Technology. The second edition o...

  7. Springer handbook of acoustics

    CERN Document Server

    2014-01-01

    Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and electronics. The Springer Handbook of Acoustics is also in his 2nd edition an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents. This new edition of the Handbook features over 11 revised and expanded chapters, new illustrations, and 2 new chapters covering microphone arrays  and acoustic emission.  Updated chapters contain the latest research and applications in, e.g. sound propagation in the atmosphere, nonlinear acoustics in fluids, building and concert hall acoustics, signal processing, psychoacoustics, computer music, animal bioacousics, sound intensity, modal acoustics as well as new chapters on microphone arrays an...

  8. Criticality handbook. Pt. 1

    International Nuclear Information System (INIS)

    Heinicke, W.; Krug, H.; Thomas, W.; Weber, W.; Gmal, B.

    1985-12-01

    The GRS Criticality Handbook is intended as a source of information on criticality problems for the persons concerned in industry, authorities, or research laboratories. It is to serve as a guide allowing quick and appropriate evaluation of criticality problems during design or erection of nuclear installations. This present issue replaces the one published in 1979, presenting revised and new data in a modified construction, but within the framework of the proven basic structure of the Handbook. Some fundamental knowledge is required of criticality problems and the relevant terms and definitions of nuclear safety, in order to fully deploy the information given. Part 1 of the Handbook therefore first introduces terminology and definitions, followed by experimental methods and calculation models for criticality calculations. The next chapters deal with the function and efficiency of neutron reflectors and neutron absorbers, measuring methods for criticality monitoring, organisational safety measures, and criticality accidents and their subsequent analysis. (orig./HP) [de

  9. Ergonomics in the context of system safety

    International Nuclear Information System (INIS)

    Donnelly, K.E.

    1984-01-01

    In a complex industrial environment, ergonomics must be combined with management science and systems analysis to produce a program which can create effective change and improve safety performance. We give an overview of such an approach, namely System Safety, so that its ergonomic content may be seen

  10. The Impact of Physical and Ergonomic Hazards on Poultry Abattoir Processing Workers: A Review

    Science.gov (United States)

    Harmse, Johannes L.; Engelbrecht, Jacobus C.; Bekker, Johan L.

    2016-01-01

    The poultry abattoir industry continues to grow and contribute significantly to the gross domestic product in many countries. The industry expects working shifts of eight to eleven hours, during which workers are exposed to occupational hazards which include physical hazards ranging from noise, vibration, exposure to cold and ergonomic stress from manual, repetitive tasks that require force. A PubMed, Medline and Science Direct online database search, using specific keywords was conducted and the results confirmed that physical and ergonomic hazards impact on abattoir processing workers health, with harm not only to workers’ health but also as an economic burden due to the loss of their livelihoods and the need for treatment and compensation in the industry. This review endeavours to highlight the contribution poultry processing plays in the development of physical agents and ergonomic stress related occupational diseases in poultry abattoir processing workers. The impact includes noise-induced hearing loss, increased blood pressure, menstrual and work related upper limb disorders. These are summarised as a quick reference guide for poultry abattoir owners, abattoir workers, poultry associations, occupational hygienists and medical practitioners to assist in the safer management of occupational health in poultry abattoirs. PMID:26861374

  11. The digital media handbook

    CERN Document Server

    Dewdney, Andrew

    2013-01-01

    The new edition of The Digital Media Handbook presents an essential guide to the historical and theoretical development of digital media, emphasising cultural continuity alongside technological change, and highlighting the emergence of new forms of communication in contemporary networked culture.Andrew Dewdney and Peter Ride present detailed critical commentary and descriptive historical accounts, as well as a series of interviews from a range of digital media practitioners, including producers, developers, curators and artists.The Digital Media Handbook highlights key concerns of today's prac

  12. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    1988-01-01

    Practical Electronics Handbook, Second Edition covers information useful in electronics, with focus on mathematical conventions. The handbook discusses the passive (resistors, capacitors, band coding, and inductors) and active discrete (diodes, transistors and negative feedback) components; discrete component circuits; and transferring digital data. Linear I.C.s, which are the single-chip arrangements of amplifier circuits that are intended to be biased and operated in a linear way, and digital I.C.s, which process signals and consist of two significant voltage levels, are also considered. T

  13. Federal environmental inspections handbook

    International Nuclear Information System (INIS)

    1991-10-01

    This Federal Environmental Inspection Handbook has been prepared by the Department of Energy (DOE), Office of Environmental Guidance, RCRA/CERCLA Division (EH-231). It is designed to provide DOE personnel with an easily accessible compilation of the environmental inspection requirements under Federal environmental statutes which may impact DOE operations and activities. DOE personnel are reminded that this Handbook is intended to be used in concert with, and not as a substitute for, the Code of Federal Regulations (CFR). Federal Register (FR), and other applicable regulatory documents

  14. Handbook of optical design

    CERN Document Server

    Malacara-Hernández, Daniel

    2013-01-01

    Handbook of Optical Design, Third Edition covers the fundamental principles of geometric optics and their application to lens design in one volume. It incorporates classic aspects of lens design along with important modern methods, tools, and instruments, including contemporary astronomical telescopes, Gaussian beams, and computer lens design. Written by respected researchers, the book has been extensively classroom-tested and developed in their lens design courses. This well-illustrated handbook clearly and concisely explains the intricacies of optical system design and evaluation. It also di

  15. The french criticality handbook

    International Nuclear Information System (INIS)

    Maubert, L.; Puit, J.C.

    1987-01-01

    The french criticality handbook, published in 1978 by the ''Commissariat a l'Energie Atomique'', is presented with the main targets aimed by the writer and the main choices taken relating to fissile mediums, reflection conditions, dilution curves. The validation of the critical values is presented as one of the most important aspects of this handbook which is mainly intended, in the mind of the author, to specialists well advertised in the field of criticality. The complements which have been introduced since 1978 and those which are foreseen in a near future are also detailed. (author)

  16. Handbook of biomedical optics

    CERN Document Server

    Boas, David A

    2011-01-01

    Biomedical optics holds tremendous promise to deliver effective, safe, non- or minimally invasive diagnostics and targeted, customizable therapeutics. Handbook of Biomedical Optics provides an in-depth treatment of the field, including coverage of applications for biomedical research, diagnosis, and therapy. It introduces the theory and fundamentals of each subject, ensuring accessibility to a wide multidisciplinary readership. It also offers a view of the state of the art and discusses advantages and disadvantages of various techniques.Organized into six sections, this handbook: Contains intr

  17. Information security management handbook

    CERN Document Server

    2002-01-01

    The Information Security Management Handbook continues its tradition of consistently communicating the fundamental concepts of security needed to be a true CISSP. In response to new developments, Volume 4 supplements the previous volumes with new information covering topics such as wireless, HIPAA, the latest hacker attacks and defenses, intrusion detection, and provides expanded coverage on security management issues and applications security. Even those that don't plan on sitting for the CISSP exam will find that this handbook is a great information security reference.The changes in the tech

  18. Handbook of vacuum physics

    CERN Document Server

    1964-01-01

    Handbook of Vacuum Physics, Volume 3: Technology is a handbook of vacuum physics, with emphasis on the properties of miscellaneous materials such as mica, oils, greases, waxes, and rubber. Accurate modern tables of physical constants, properties of materials, laboratory techniques, and properties of commercial pumps, gauges, and leak detectors are presented. This volume is comprised of 12 chapters and begins with a discussion on pump oils, divided into rotary pump oils and vapor pump oils. The next chapter deals with the properties and applications of greases, including outgassing and vapor pr

  19. Handbook of interatomic potentials

    International Nuclear Information System (INIS)

    Stoneham, A.M.; Taylor, R.

    1981-08-01

    This Handbook collects together interatomic potentials for a large number of metals. Most of the potentials describe the interactions of host metal atoms with each other, and these, in some cases, may be applied to solid and liquid metals. In addition, there are potentials (a) for a metallic impurity alloyed with the host, (b) for a small number of chemical impurities in the metal (eg H, O), and (c) for rare-gas impurities, notably He. The Handbook is intended to be a convenient source of potentials for bulk, surface and defect calculations, both static and dynamic. (author)

  20. Nanoelectronic device applications handbook

    CERN Document Server

    Morris, James E

    2013-01-01

    Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal-oxide-semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world.These include: Nanoscale advance

  1. Information security management handbook

    CERN Document Server

    Tipton, Harold F

    2003-01-01

    Since 1993, the Information Security Management Handbook has served not only as an everyday reference for information security practitioners but also as an important document for conducting the intense review necessary to prepare for the Certified Information System Security Professional (CISSP) examination. Now completely revised and updated and in its fifth edition, the handbook maps the ten domains of the Information Security Common Body of Knowledge and provides a complete understanding of all the items in it. This is a ...must have... book, both for preparing for the CISSP exam and as a c

  2. Handbook of probability

    CERN Document Server

    Florescu, Ionut

    2013-01-01

    THE COMPLETE COLLECTION NECESSARY FOR A CONCRETE UNDERSTANDING OF PROBABILITY Written in a clear, accessible, and comprehensive manner, the Handbook of Probability presents the fundamentals of probability with an emphasis on the balance of theory, application, and methodology. Utilizing basic examples throughout, the handbook expertly transitions between concepts and practice to allow readers an inclusive introduction to the field of probability. The book provides a useful format with self-contained chapters, allowing the reader easy and quick reference. Each chapter includes an introductio

  3. DOE fundamentals handbook: Chemistry

    International Nuclear Information System (INIS)

    1993-01-01

    The Chemistry Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of chemistry. The handbook includes information on the atomic structure of matter; chemical bonding; chemical equations; chemical interactions involved with corrosion processes; water chemistry control, including the principles of water treatment; the hazards of chemicals and gases, and basic gaseous diffusion processes. This information will provide personnel with a foundation for understanding the chemical properties of materials and the way these properties can impose limitations on the operation of equipment and systems

  4. Handbook of surveillance technologies

    CERN Document Server

    Petersen, JK

    2012-01-01

    From officially sanctioned, high-tech operations to budget spy cameras and cell phone video, this updated and expanded edition of a bestselling handbook reflects the rapid and significant growth of the surveillance industry. The Handbook of Surveillance Technologies, Third Edition is the only comprehensive work to chronicle the background and current applications of the full-range of surveillance technologies--offering the latest in surveillance and privacy issues.Cutting-Edge--updates its bestselling predecessor with discussions on social media, GPS circuits in cell phones and PDAs, new GIS s

  5. Software quality assurance handbook

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  6. Handbook of radioimmunoassay

    International Nuclear Information System (INIS)

    Abraham, G.E.

    1977-01-01

    This handbook provides clear, detailed descriptions of ways to set up radioimmunoassay procedures for a variety of polypeptides and low molecular weight compounds. It covers extensively the subjects of statistical evaluation of radioimmunoassay, instrumentation in radioimmunoassay, and radiation safety in the performance of radioimmunoassay. Related nonconventional methods are also discussed. Contributors to this handbook have presented their own procedures for performing the radioimmunoassay and their rationale for choosing particular reagents and conditions. Emphasis is on providing sufficient information to enable relatively inexperienced immunoassayists to set up assay systems with a minimum of difficulty

  7. Initiating an ergonomic analysis. A process for jobs with highly variable tasks.

    Science.gov (United States)

    Conrad, K M; Lavender, S A; Reichelt, P A; Meyer, F T

    2000-09-01

    Occupational health nurses play a vital role in addressing ergonomic problems in the workplace. Describing and documenting exposure to ergonomic risk factors is a relatively straightforward process in jobs in which the work is repetitive. In other types of work, the analysis becomes much more challenging because tasks may be repeated infrequently, or at irregular time intervals, or under different environmental and temporal conditions, thereby making it difficult to observe a "representative" sample of the work performed. This article describes a process used to identify highly variable job tasks for ergonomic analyses. The identification of tasks for ergonomic analysis was a two step process involving interviews and a survey of firefighters and paramedics from a consortium of 14 suburban fire departments. The interviews were used to generate a list of frequently performed, physically strenuous job tasks and to capture clear descriptions of those tasks and associated roles. The goals of the survey were to confirm the interview findings across the entire target population and to quantify the frequency and degree of strenuousness of each task. In turn, the quantitative results from the survey were used to prioritize job tasks for simulation. Although this process was used to study firefighters and paramedics, the approach is likely to be suitable for many other types of occupations in which the tasks are highly variable in content and irregular in frequency.

  8. Ergonomic risk: social representations of dental students

    Directory of Open Access Journals (Sweden)

    Luana Kelle Batista Moura

    2014-01-01

    Full Text Available Objective: To learn the social representations of ergonomic risk prepared ​​by dental students. Methodology: This exploratory study, subsidized the Theory of Social Representations, with 64 dental students of an educational institution, by means of interviews. The data were processed in Alceste4.8 and lexical analysis done by the descending hierarchical classification. Results: In two categories: knowledge about exposure to ergonomic risk end attitude of students on preventing and treating injuries caused by repetitive motion. For students, the ergonomic risk is related to the attitude in the dental office. Conclusion: Prevention of ergonomic risk for dental students has not been incorporated as a set of necessary measures for their health and the patients, to prevent ergonomic hazards that can result in harm to the patient caused by work-related musculoskeletal disorder, which is reflected in a lower quality practice.

  9. Process evaluation of a parcipatory ergonomics programme to prevent low back pain and neck pain among workers

    NARCIS (Netherlands)

    Driessen, M.T.; Proper, K.I.; Anema, J.R.; Bongers, P.M.; van der Beek, A.J.

    2010-01-01

    Background: Both low back pain (LBP) and neck pain (NP) are major occupational health problems. In the workplace, participatory ergonomics (PE) is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled

  10. Process evaluation of a participatory ergonomics programme to prevent low back pain and neck pain among workers

    NARCIS (Netherlands)

    Driessen, M.T.; Proper, K.I.; Anema, J.R.; Bongers, P.M.; Beek, A.J. van der

    2010-01-01

    Background: Both low back pain (LBP) and neck pain (NP) are major occupational health problems. In the workplace, participatory ergonomics (PE) is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled

  11. Reference handbook: Level detectors

    International Nuclear Information System (INIS)

    1990-01-01

    The purpose of this handbook is to provide Rocky Flats personnel with the information necessary to understand level measurement and detection. Upon completion of this handbook you should be able to do the following: List three reasons for measuring level. Describe the basic operating principles of the sight glass. Demonstrate proper techniques for reading a sight glass. Describe the basic operating principles of a float level detector. Describe the basic operating principles of a bubbler level indicating system. Explain the differences between a wet and dry reference leg indicating system, and describe how each functions. This handbook is designed for use by experienced Rocky Flats operators to reinforce and improve their current knowledge level, and by entry-level operators to ensure that they possess a minimum level of fundamental knowledge. Level Detectors is applicable to many job classifications and can be used as a reference for classroom work or for self-study. Although this reference handbook is by no means all-encompassing, you will gain enough information about this subject area to assist you in contributing to the safe operation of Rocky Flats Plant

  12. Rain Gauges Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomew, M. J. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-01-01

    To improve the quantitative description of precipitation processes in climate models, the Atmospheric Radiation Measurement (ARM) Climate Research Facility deployed rain gauges located near disdrometers (DISD and VDIS data streams). This handbook deals specifically with the rain gauges that make the observations for the RAIN data stream. Other precipitation observations are made by the surface meteorology instrument suite (i.e., MET data stream).

  13. Area Handbook for Uruguay.

    Science.gov (United States)

    Weil, Thomas E.; And Others

    This volume is one of 62 in a series of handbooks designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political, and military institutions and practices of various countries. The emphasis is on objective description of the nation's present society and the kinds of…

  14. Area Handbook for Syria.

    Science.gov (United States)

    Nyrop, Richard; And Others

    This volume on Syria is one of a series of handbooks prepared by the Foreign Area Studies (FAS) of the American University, designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political, and military institutions and practices of various countries. The emphasis is on…

  15. Transit manager's handbook.

    Science.gov (United States)

    2011-09-01

    This handbook provides an overview of public transit in Iowa and how to do business with the Iowa Department of Transportation (Iowa DOT) Office of Public Transit (OPT). It is intended to be a tool to assist transit managers navigate through the many...

  16. Referencing handbook: OSCOLA

    OpenAIRE

    Williams, Helen

    2016-01-01

    University of Lincoln approved guide to OSCOLA referencing. Providing guidelines on how to reference UK, EU and International primary sources of law and secondary sources. The handbook provides examples and annotated diagrams to help you reference sources in the OSCOLA style.

  17. Oil economists' handbook 1984

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, G [ed.

    1983-01-01

    This handbook lists statistics on energy resources, production and consumption; petroleum refining, products, storage, quality and prices; shipping; pipelines; and energy companies. Conversion factors, a dictionary of terms, and a chronology of major events (1919-1938) are included. The data given runs up to 1982/83.

  18. Wildlife Habitat Evaluation Handbook.

    Science.gov (United States)

    Neilson, Edward L., Jr.; Benson, Delwin E.

    The National 4-H Wildlife Invitational is a competitive event to teach youth about the fundamentals of wildlife management. Youth learn that management for wildlife means management of wildlife habitat and providing for the needs of wildlife. This handbook provides information about wildlife habitat management concepts in both urban and rural…

  19. Capability Handbook- offline metrology

    DEFF Research Database (Denmark)

    Islam, Aminul; Marhöfer, David Maximilian; Tosello, Guido

    This offline metrological capability handbook has been made in relation to HiMicro Task 3.3. The purpose of this document is to assess the metrological capability of the HiMicro partners and to gather the information of all available metrological instruments in the one single document. It provides...

  20. Shallow land burial handbook

    International Nuclear Information System (INIS)

    Stinton, L.H.

    1983-01-01

    The facility development phases (preliminary analysis, site selection, facility design and construction, facility operation, and facility closure/post-closure) are systematically integrated into a logical plan for developing near surface disposal plans. The Shallow Land Burial Handbook provides initial guidance and concepts for understanding the magnitude and the complexity of developing new low-level radioactive waste disposal facilities

  1. Radiation`96. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The conference program includes eight invited lectures which cover a range of contemporary topics in radiation science and technology. In addition, thirty-two oral papers were presented, along with forty-five posters. The conference handbook contains one-page precis or extended abstracts of all presentations, and is a substantial compendium of current radiation research in Australia.

  2. Radiation`96. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The conference program includes eight invited lectures which cover a range of contemporary topics in radiation science and technology. In addition, thirty-two oral papers were presented, along with forty-five posters. The conference handbook contains one-page precis or extended abstracts of all presentations, and is a substantial compendium of current radiation research in Australia.

  3. The Video Handbook.

    Science.gov (United States)

    1972

    In order to provide basic technical and production information for closed-circuit television, the editors have assembled this series of papers. Deisgned as an introductory guide for those entering the field, the handbook covers the basic areas of non-broadcast television. Starting with facilities and equipment the guide outlines the planning and…

  4. European food law handbook

    NARCIS (Netherlands)

    Meulen, van der B.M.J.; Velde, van der M.; Szajkowska, A.; Verbruggen, R.

    2008-01-01

    This handbook analyses and explains the institutional, substantive and procedural elements of EU food law, taking the General Food Law as a focus point. Principles are discussed as well as specific rules addressing food as a product, the processes related to food and communication about food through

  5. PASHTO INSTRUCTOR'S HANDBOOK.

    Science.gov (United States)

    CHAVARRIA-AGUILAR, O.L.

    THE MATERIALS IN THIS HANDBOOK CONSIST OF 64 PRONUNCIATION DRILLS FOR THE "PASHTO BASIC COURSE." THESE DRILLS ARE BASED ON A CONTRASTIVE ANALYSIS OF PASHTO AND ENGLISH PHONOLOGY AND ARE TO BE ADMINISTERED BY A NATIVE SPEAKER. SIXTY PASHTO ITEMS ARE INCLUDED IN EACH DRILL, 30 CONTAINING THE PARTICULAR SOUND BEING TAUGHT AND 30 CONTAINING…

  6. Trustee Handbook. Fourth Edition.

    Science.gov (United States)

    Johnson, Eric W.

    The principles of sound governance and administration of independent schools are discussed in this handbook for private school trustees. The nature and responsibilities of school boards are presented, along with a description of the functions of various types of board committees. A chapter on the duties of school board members provides orientation…

  7. The Population Activist's Handbook.

    Science.gov (United States)

    Population Inst., Washington, DC.

    This handbook is a guide to effective action strategies on dealing with overpopulation. Divided into five sections, the book outlines programs, suggests references, and lists resources that are helpful for thinking and for planning action on population issues. Section one focuses on strategies to change the current population policy choices made…

  8. Energy manager's handbook

    Energy Technology Data Exchange (ETDEWEB)

    Payne, G A

    1977-01-01

    The handbook provides sufficient guidance on the principles involved for readers to tailor a program to meet their own requirement. The following chapters are included: Energy Conservation; Management of Energy; Delivery, Storage, and Handling of Fuels; Boilers; Furnaces; Heat Distribution and Utilization; Industrial Space Heating; Electricity; Services; and Road Transport. (MCW)

  9. DOE handbook: Design considerations

    International Nuclear Information System (INIS)

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

  10. Faculty Handbook. Regis College.

    Science.gov (United States)

    Regis Coll., Weston, MA.

    Regis College policies and procedures are described in this 1976 faculty handbook. Chapter 1 covers college organization and governance, including roles of academic officers and committees. Specific faculty data are presented in Chapter 2, such as definition of academic ranks and titles, recruitment and appointment, promotion, tenure, review,…

  11. Area Handbook for Ghana.

    Science.gov (United States)

    Kaplan, Irving; And Others

    The dominant social, political, and economic aspects of Ghanaian society are described in this handbook. Changes and developments in Ghana in the past 10 years, highlighted by the 1966 overthrough and widespread repudiation of Kwame Nkrumah and his policies and practices, have created a need for this revision of the 1962 edition. The purpose of…

  12. Handbook of nanomaterials properties

    CERN Document Server

    Luo, Dan; Schricker, Scott R; Sigmund, Wolfgang; Zauscher, Stefan

    2014-01-01

    Nanomaterials attract tremendous attention in recent researches. Although extensive research has been done in this field it still lacks a comprehensive reference work that presents data on properties of different Nanomaterials. This Handbook of Nanomaterials Properties will be the first single reference work that brings together the various properties with wide breadth and scope.

  13. Animal damage management handbook.

    Science.gov (United States)

    Hugh C. Black

    1994-01-01

    This handbook treats animal damage management (ADM) in the West in relation to forest, range, and recreation resources; predator management is not addressed. It provides a comprehensive reference of safe, effective, and practical methods for managing animal damage on National Forest System lands. Supporting information is included in references after each chapter and...

  14. Parent Involvement Handbook.

    Science.gov (United States)

    Caplan, Arna

    This handbook on parent involvement, designed to be used with preschool programs, was developed by the Jefferson County Public Schools in Lakewood, Colorado. Included are: (1) a general statement about parent involvement in an early childhood program, (2) a description of the Jefferson County Early Childhood Program, (3) a description of the…

  15. Nuclear safeguards technology handbook

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included. (LK)

  16. Handbook on Peace Education

    Science.gov (United States)

    Salomon, Gavriel, Ed.; Cairns, Ed, Ed.

    2009-01-01

    This handbook encompasses a range of disciplines that underlie the field of peace education and provides the rationales for the ways it is actually carried out. The discipline is a composite of contributions from a variety of disciplines ranging from social psychology to philosophy and from communication to political science. That is, peace…

  17. Nuclear safeguards technology handbook

    International Nuclear Information System (INIS)

    1977-12-01

    The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included

  18. Radiation'96. Conference handbook

    International Nuclear Information System (INIS)

    1996-01-01

    The conference program includes eight invited lectures which cover a range of contemporary topics in radiation science and technology. In addition, thirty-two oral papers were presented, along with forty-five posters. The conference handbook contains one-page precis or extended abstracts of all presentations, and is a substantial compendium of current radiation research in Australia

  19. Humane Education Projects Handbook.

    Science.gov (United States)

    Junior League of Ogden, UT.

    This handbook was developed to promote interest in humane education and to encourage the adoption of humane education projects. Although specifically designed to assist Junior Leagues in developing such projects, the content should prove valuable to animal welfare organizations, zoos, aquariums, nature centers, and other project-oriented groups…

  20. DOE handbook: Design considerations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  1. The Military Instructor's Handbook

    DEFF Research Database (Denmark)

    Sjøstedt, Peter; Grønlund, Thomas

    The Military Instructor's handbook was written for the basic professional training of instructors in the danish defence. The book describes the work of instructors and their areas of responsibility, and it offers guidance and direction on how to plan, conduct and evaluate learning activities...

  2. Nair handbook. 1995 edition

    International Nuclear Information System (INIS)

    1995-01-01

    This Handbook contains general background, administrative and technical information for those participating in the National Arrangements for Incidents involving Radioactivity (NAIR), updating and replacing the previous edition published in 1987. The overriding need for revision was brought about as a result of changes introduced by British Telecom to the telephone numbers of establishments. (UK)

  3. Girls Physical Education Handbook.

    Science.gov (United States)

    Fairfax County Schools, VA.

    This handbook was designed to provide the student with basic information for various individual, dual, and team sports. The individual and dual sports which are discussed include archery, badminton, creative dance, fencing, golf, gymnastics, and games such as deck tennis, table tennis, horseshoes, and shuffledboard. Basketball, field hockey,…

  4. Green ergonomics: challenges and opportunities.

    Science.gov (United States)

    Hanson, Margaret A

    2013-01-01

    Addressing the causes and consequences of environmental degradation presents significant challenges for humankind. This paper considers what ergonomics/human factors (E/HF) professionals can contribute to understanding and tackling some of the issues that arise through the movement towards a more environmentally sustainable economy. These issues are considered in relation to work in green industries (specifically, sustainable energy production, recycling and organic food production), and there is a need to ensure that these jobs are safe and healthy; the design of products and systems that are 'environmentally friendly' to facilitate their acceptability and use and how E/HF professionals can contribute to understanding and promoting behavioural change relating to environmental choices. The activities of some international organisations in this area are identified and the potential for E/HF involvement is considered. The implications for the E/HF profession are discussed. This paper considers how ergonomics/human factors professionals can contribute to the movement towards more sustainable and 'environmentally friendly' design and work. Potential challenges and opportunities are discussed in relation to jobs in green industries, products and systems and behaviour change.

  5. Designing for sustainability: ergonomics--carpe diem.

    Science.gov (United States)

    Martin, K; Legg, S; Brown, C

    2013-01-01

    Sustainability is a global issue that has worldwide attention but the role of ergonomics in designing for sustainability is poorly understood and seldom considered. An analysis of the literature on ergonomics, design and sustainability was conducted via a search of electronic databases: Scopus, Business Source Complete, Google Scholar, Emerald Publishing, Academic Search Premiere, Web of Science, Discover and Ergonomics Abstracts, for the years 1995-2012. A total of 1934 articles fulfilled the search criteria, but content analysis of the abstracts indicated that only 14 refereed articles addressed the main search criteria. Of those seven were in ergonomics journals and seven were in other journals (and were not written by ergonomists). It is concluded that the contribution of ergonomics to sustainability and sustainable design has been limited, even though the goals of sustainability and ergonomics are congruent. Ergonomists have not been at the forefront of research contributing to sustainability - and it is time for them to 'seize the day' - 'carpe diem'. This literature review shows that ergonomics contribution to sustainability is limited but since there is congruence between the disciplines it calls for ergonomists to become more involved and to seize the day - carpe diem.

  6. Ergonomics: case study in a university library

    Directory of Open Access Journals (Sweden)

    Daniela Capri

    2012-08-01

    Full Text Available This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics were contextualized and linked to the library and the university library. Referring to the methodology, the Ergonomical Assessment of the Built Environment was used as a reference. The study subjects comprised a sample of 15, among students and library staff. In the results obtained, when related to the physical-environmental analysis of the library, it was found that there are some aspects that differ from the regulatory standards and that also fall short in relation to feedback from users. Aspects such as lighting and noise were cited as unsatisfactory, but the temperature factor was analyzed as satisfactory.

  7. The Changes of Ergonomics in Hungary and Engineering Education

    OpenAIRE

    Istvan Lükö

    2013-01-01

    Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-tech...

  8. Feasibility and acceptance of a robotic surgery ergonomic training program.

    Science.gov (United States)

    Franasiak, Jason; Craven, Renatta; Mosaly, Prithima; Gehrig, Paola A

    2014-01-01

    Assessment of ergonomic strain during robotic surgery indicates there is a need for intervention. However, limited data exist detailing the feasibility and acceptance of ergonomic training (ET) for robotic surgeons. This prospective, observational pilot study evaluates the implementation of an evidence-based ET module. A two-part survey was conducted. The first survey assessed robotic strain using the Nordic Musculoskeletal Questionnaire (NMQ). Participants were given the option to participate in either an online or an in-person ET session. The ET was derived from Occupational Safety and Health Administration guidelines and developed by a human factors engineer experienced with health care ergonomics. After ET, a follow-up survey including the NMQ and an assessment of the ET were completed. The survey was sent to 67 robotic surgeons. Forty-two (62.7%) responded, including 18 residents, 8 fellows, and 16 attending physicians. Forty-five percent experienced strain resulting from performing robotic surgery and 26.3% reported persistent strain. Only 16.6% of surgeons reported prior ET in robotic surgery. Thirty-five (78%) surgeons elected to have in-person ET, which was successfully arranged for 32 surgeons (91.4%). Thirty-seven surgeons (88.1%) completed the follow-up survey. All surgeons participating in the in-person ET found it helpful and felt formal ET should be standard, 88% changed their practice as a result of the training, and 74% of those reporting strain noticed a decrease after their ET. Thus, at a high-volume robotics center, evidence-based ET was easily implemented, well-received, changed some surgeons' practice, and decreased self-reported strain related to robotic surgery.

  9. Ergonomics

    Science.gov (United States)

    ... Program . Areas that should be addressed a facility's safety and health program include: Management Leadership / Employee Participation Workplace Analysis Accident and Record Analysis Hazard Prevention and ...

  10. Cognitive ergonomics of operational tools

    International Nuclear Information System (INIS)

    Luedeke, A.

    2012-01-01

    Control systems have become increasingly more powerful over the past decades. The availability of high data throughput and sophisticated graphical interactions has opened a variety of new possibilities. But has this helped to provide intuitive, easy to use applications to simplify the operation of modern large scale accelerator facilities? We will discuss what makes an application useful to operation and what is necessary to make a tool easy to use. We will show that even the implementation of a small number of simple application design rules can help to create ergonomic operational tools. The author is convinced that such tools do indeed help to achieve higher beam availability and better beam performance at all accelerator facilities. (author)

  11. Ergonomics and nuclear power generation

    International Nuclear Information System (INIS)

    Beyers, C.J.; Bogie, K.D.

    1986-01-01

    The design and construction of nuclear power plants are executed to rigorous standards of safety and reliability. Similarly the human interface within the nuclear power plant must meet very high standards, and these must be demonstrated to be maintained and assured through time. The control room, as the operating nerve-centre of the plant, carries a large part of this responsibility. It is the work space dimension within which the operator-instrumentation interface must function as efficiently as possible. This paper provides an overview of how ergonomics has been used as a major tool in reshaping the man-machine interface within the control room in the interest of safety and reliability. Topics covered in the paper include workspace design, control panel layout, demarcation and labelling, switch and meter types, and annunciated and unannunciated alarms

  12. Physical Strain and Work Ergonomics in Farmers with Disabilities.

    Science.gov (United States)

    Nevala-Puranen, Nina; Sörensen, Lars

    1997-01-01

    In agriculture, occupational injuries are common, and several of them lead to permanent physical disability. The objective of this case study was to assess the strain and the ergonomic needs of four farmers (aged 34-49 years) with physical disabilities. A maximal bicycle ergometer test or an arm-crank test was done to assess their maximal heart rate (HR max ) and maximal oxygen consumption (V0 2max ). The strain at work was analyzed by measuring heart rate (HR), muscle activity (EMG), and the rating of perceived exertion (RPE). The farmers were interviewed as to possible and impossible work tasks and the ergonomic redesign measures taken to improve the work environment. The work tasks performed were mainly light or moderate work for the cardiorespiratory system according to mean HR (88-102 beats/min), the percentage of HR range (17-31% HRR), and the relative V0 2 (22-46% V0 2max ). The mean activity of the trapezius muscles was 0.4-9% of the maximal voluntary contraction (%MVC). All the participants had work tasks they were unable to perform. They had made ergonomie redesign changes mainly to the tractor. This case study showed that some agricultural work tasks were possible for farmers with physical disabilities and that the physical strain associated with these tasks was mainly light or moderate.

  13. Integrating ergonomic knowledge into engineering design processes

    DEFF Research Database (Denmark)

    Hall-Andersen, Lene Bjerg

    Integrating ergonomic knowledge into engineering design processes has been shown to contribute to healthy and effective designs of workplaces. However, it is also well-recognized that, in practice, ergonomists often have difficulties gaining access to and impacting engineering design processes...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...... to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...

  14. Ergonomics in nuclear and human factors engineering

    International Nuclear Information System (INIS)

    Muench, E.; Schultheiss, G.F.

    1988-01-01

    The work situation including man-machine-relationships in nuclear power plants is described. The overview gives only a compact summary of some important ergonomic parameters, i.e. human body dimension, human load, human characteristics and human knowledge. (DG)

  15. Corporate ergonomics programme at Ford Motor Company.

    Science.gov (United States)

    Joseph, Bradley S

    2003-01-01

    The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

  16. Ergonomics and safety in secondary wood processing

    Science.gov (United States)

    Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih

    2002-01-01

    The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.

  17. Office ergonomics: deficiencies in computer workstation design.

    Science.gov (United States)

    Shikdar, Ashraf A; Al-Kindi, Mahmoud A

    2007-01-01

    The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.

  18. Ewe (for Togo): Grammar Handbook. Peace Corps Language Handbook Series.

    Science.gov (United States)

    Kozelka, Paul R.

    This handbook is composed of: (1) 20 grammar lessons; (2) an introduction to the handbook and to the Ewe language; (3) an appendix presenting the most important differences between Ewe and Mina, the lingua franca in the capital and in markets, offices, and work-sites throughout Togo; (4) answers to written summary exercises; (5) an Ewe-English…

  19. The ergonomics of command and control

    OpenAIRE

    Stanton, NA; Baber, C

    2006-01-01

    Since its inception, just after the Second World War, ergonomics research has paid special attention to the issues surrounding human control of systems. Command and Control environments continue to represent a challenging domain for Ergonomics research. We take a broad view of Command and Control research, to include C2 (Command and Control), C3 (Command, Control and Communication), and C4 (Command, Control, Communication and Computers) as well as human supervisory control paradigms. This spe...

  20. Ergonomics and its application to Sizewell 'B'

    International Nuclear Information System (INIS)

    Singleton, W.T.

    1986-01-01

    The scope of the ergonomics contribution to the design and operation of power stations is described on the basis of current experience in the CEGB and in other countries. The ergonomics questions which arise in relation to Sizewell 'B' are enumerated in detail. Issues which arise from the point of view of station operation and from the complementary point of view of human behaviour are considered. (author)

  1. Springer handbook of spacetime

    CERN Document Server

    Petkov, Vesselin

    2014-01-01

    The Springer Handbook of Spacetime is dedicated to the ground-breaking paradigm shifts embodied in the two relativity theories, and describes in detail the profound reshaping of physical sciences they ushered in. It includes in a single volume chapters on foundations, on the underlying mathematics, on physical and astrophysical implications, experimental evidence and cosmological predictions, as well as chapters on efforts to unify general relativity and quantum physics. The Handbook can be used as a desk reference by researchers in a wide variety of fields, not only by specialists in relativity but also by researchers in related areas that either grew out of, or are deeply influenced by, the two relativity theories: cosmology, astronomy and astrophysics, high energy physics, quantum field theory, mathematics, and philosophy of science. It should also serve as a valuable resource for graduate students and young researchers entering these areas, and for instructors who teach courses on these subjects. The Han...

  2. Handbook of sustainable engineering

    CERN Document Server

    Lee, Kun-Mo

    2013-01-01

    "The efficient utilization of energy, sustainable use of natural resources, and large-scale adoption of sustainable technologies is the key to a sustainable future. The Handbook of Sustainable Engineering provides tools that will help us achieve these goals". Nobel Prize Winner Dr. R.K. Pauchauri, Chairman, UN Intergovernmental Panel on Climate Change As global society confronts the challenges of diminishing resources, ecological degradation, and climate change, engineers play a crucial role designing and building technologies and products that fulfil our needs for utility and sustainability. The Handbook of Sustainable Engineering equips readers with the context and the best practices derived from both academic research and practical examples of successful implementations of sustainable technical solutions. The handbook’s content revolves around the two themes, new ways of thinking and new business models, including sustainable production, products, service systems and consumption while addressing key asse...

  3. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2013-01-01

    Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

  4. Handbook of electroporation

    CERN Document Server

    2017-01-01

    This major reference work is a one-shot knowledge base on electroporation and the use of pulsed electric fields of high intensity and their use in biology, medicine, biotechnology, and food and environmental technologies. The Handbook offers a widespread and well-structured compilation of 156 chapters ranging from the foundations to applications in industry and hospital. It is edited and written by most prominent researchers in the field. With regular updates and growing in its volume it is suitable for academic readers and researchers regardless of their disciplinary expertise, and will also be accessible to students and serious general readers. The Handbook's 276 authors have established scholarly credentials and come from a wide range of disciplines. This is crucially important in a highly interdisciplinary field of electroporation and the use of pulsed electric fields of high intensity and its applications in different fields from medicine, biology, food proce ssing, agriculture, process engineering, en...

  5. The data analysis handbook

    CERN Document Server

    Frank, IE

    1994-01-01

    Analyzing observed or measured data is an important step in applied sciences. The recent increase in computer capacity has resulted in a revolution both in data collection and data analysis. An increasing number of scientists, researchers and students are venturing into statistical data analysis; hence the need for more guidance in this field, which was previously dominated mainly by statisticians. This handbook fills the gap in the range of textbooks on data analysis. Written in a dictionary format, it will serve as a comprehensive reference book in a rapidly growing field. However, this book is more structured than an ordinary dictionary, where each entry is a separate, self-contained entity. The authors provide not only definitions and short descriptions, but also offer an overview of the different topics. Therefore, the handbook can also be used as a companion to textbooks for undergraduate or graduate courses. 1700 entries are given in alphabetical order grouped into 20 topics and each topic is organized...

  6. Sodium technology handbook

    International Nuclear Information System (INIS)

    2005-09-01

    This document was published as a textbook for the education and training of personnel working for operations and maintenances of sodium facilities including FBR plants and those engaged in R and D activities related to sodium technology. This handbook covers the following technical areas. Properties of sodium. Compatibilities of sodium with materials. Thermalhydraulics and structural integrity. Sodium systems and components. Sodium instrumentations. Sodium handling technology. Sodium related accident evaluation and countermeasures for FBRs. Operation, maintenance and repair technology of sodium facilities. Safety measures related to sodium. Laws, regulations and internal rules related to sodium. The plannings and discussions of the handbook were made in the Sodium Technology Education Committee organized in O-arai Engineering Center consisting of the representatives of the related departments including Tsuruga headquarters. Experts in various departments participated in writing individual technical subjects. (author)

  7. Handbook of Brain Connectivity

    CERN Document Server

    Jirsa, Viktor K

    2007-01-01

    Our contemporary understanding of brain function is deeply rooted in the ideas of the nonlinear dynamics of distributed networks. Cognition and motor coordination seem to arise from the interactions of local neuronal networks, which themselves are connected in large scales across the entire brain. The spatial architectures between various scales inevitably influence the dynamics of the brain and thereby its function. But how can we integrate brain connectivity amongst these structural and functional domains? Our Handbook provides an account of the current knowledge on the measurement, analysis and theory of the anatomical and functional connectivity of the brain. All contributors are leading experts in various fields concerning structural and functional brain connectivity. In the first part of the Handbook, the chapters focus on an introduction and discussion of the principles underlying connected neural systems. The second part introduces the currently available non-invasive technologies for measuring struct...

  8. NASA systems engineering handbook

    Science.gov (United States)

    Shishko, Robert; Aster, Robert; Chamberlain, Robert G.; McDuffee, Patrick; Pieniazek, Les; Rowell, Tom; Bain, Beth; Cox, Renee I.; Mooz, Harold; Polaski, Lou

    1995-06-01

    This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive.

  9. Fault tree handbook

    International Nuclear Information System (INIS)

    Haasl, D.F.; Roberts, N.H.; Vesely, W.E.; Goldberg, F.F.

    1981-01-01

    This handbook describes a methodology for reliability analysis of complex systems such as those which comprise the engineered safety features of nuclear power generating stations. After an initial overview of the available system analysis approaches, the handbook focuses on a description of the deductive method known as fault tree analysis. The following aspects of fault tree analysis are covered: basic concepts for fault tree analysis; basic elements of a fault tree; fault tree construction; probability, statistics, and Boolean algebra for the fault tree analyst; qualitative and quantitative fault tree evaluation techniques; and computer codes for fault tree evaluation. Also discussed are several example problems illustrating the basic concepts of fault tree construction and evaluation

  10. The clinical nanomedicine handbook

    CERN Document Server

    Brenner, Sara

    2013-01-01

    Designed to foster a stronger awareness and exploration of the subject by practicing clinicians, medical researchers and scientists, The Clinical Nanomedicine Handbook discusses the integration of nanotechnology, biology, and medicine from a clinical point of view. The book highlights relevant research and applications by specialty; it examines nanotechnology in depth, and the potential to solve medical problems. It also increases literacy in nanotechnology, and allows for more effective communication and collaboration between disciplines. Details worldwide developments in nanomedicine Provide

  11. CTBT technical issues handbook

    International Nuclear Information System (INIS)

    Zucca, J.J.

    1994-05-01

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments

  12. Energy emergency handbook

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This Handbook identifies selected state and federal measures available to mitigate the impact of an energy emergency, and provides a comprehensive energy emergency communications directory. In the case of state remedial actions, particular emphasis has been placed on typical implementation procedures and likely impacts. The discussions of federal actions focus on initation and implementation procedures. The directory is designed to facilitate communications of all types (telephone, Telex, TWX, or facsimile) among key energy emergency officials in the federal and state governments.

  13. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    2013-01-01

    Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

  14. Fixed mobile convergence handbook

    CERN Document Server

    Ahson, Syed A

    2010-01-01

    From basic concepts to future directions, this handbook provides technical information on all aspects of fixed-mobile convergence (FMC). The book examines such topics as integrated management architecture, business trends and strategic implications for service providers, personal area networks, mobile controlled handover methods, SIP-based session mobility, and supervisory and notification aggregator service. Case studies are used to illustrate technical and systematic implementation of unified and rationalized internet access by fixed-mobile network convergence. The text examines the technolo

  15. Newnes communications technology handbook

    CERN Document Server

    Lewis, Geoff

    1994-01-01

    Newnes Communications Technology Handbook provides a discussion on different topics relevant to communications technology. The book is comprised of 39 chapters that tackle a wide variety of concern in communications technology. The coverage of the text includes technologies, such as analog digital communications systems, radio frequency receiver, and satellite systems. The book also discusses some methods and techniques used in communications technology, including mixer signal processing, modulation and demodulation, and spread spectrum techniques. The text will be of great use to engineers, t

  16. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2014-01-01

    Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more.New to the Second Edition:46 brand-new chapters and 21 substantially revised chaptersInclusion of the latest, most significant developments in spe

  17. Handbook of wafer bonding

    CERN Document Server

    Ramm, Peter; Taklo, Maaike M V

    2011-01-01

    Written by an author and editor team from microsystems companies and industry-near research organizations, this handbook and reference presents dependable, first-hand information on bonding technologies.In the first part, researchers from companies and institutions around the world discuss the most reliable and reproducible technologies for the production of bonded wafers. The second part is devoted to current and emerging applications, including microresonators, biosensors and precise measuring devices.

  18. Handbook of industrial lighting

    CERN Document Server

    Lyons, Stanley L

    2013-01-01

    Handbook of Industrial Lighting is a practical guide on the specification, design, installation, operation, and maintenance of lighting in industrial premises. Coverage of the book includes the importance of good localized lighting; the different lighting schemes; lighting for difficult visual tasks; lighting in consideration to safety; and emergency lighting. The book also includes the practical, thermal, ventilation, and energy considerations; lighting in different environments; maintenance of lighting installations; and the cost benefits of efficient lighting. Appendices include useful info

  19. The universal access handbook

    CERN Document Server

    Stephanidis, Constantine

    2009-01-01

    In recent years, the field of Universal Access has made significant progress in consolidating theoretical approaches, scientific methods and technologies, as well as in exploring new application domains. Increasingly, professionals in this rapidly maturing area require a comprehensive and multidisciplinary resource that addresses current principles, methods, and tools. Written by leading international authorities from academic, research, and industrial organizations and nonmarket institutions, The Universal Access Handbook covers the unfolding scientific, methodological, technological, and pol

  20. Handbook of networking & connectivity

    CERN Document Server

    McClain, Gary R

    1994-01-01

    Handbook of Networking & Connectivity focuses on connectivity standards in use, including hardware and software options. The book serves as a guide for solving specific problems that arise in designing and maintaining organizational networks.The selection first tackles open systems interconnection, guide to digital communications, and implementing TCP/IP in an SNA environment. Discussions focus on elimination of the SNA backbone, routing SNA over internets, connectionless versus connection-oriented networks, internet concepts, application program interfaces, basic principles of layering, proto

  1. Open Science Training Handbook

    OpenAIRE

    Sonja Bezjak; April Clyburne-Sherin; Philipp Conzett; Pedro Fernandes; Edit Görögh; Kerstin Helbig; Bianca Kramer; Ignasi Labastida; Kyle Niemeyer; Fotis Psomopoulos; Tony Ross-Hellauer; René Schneider; Jon Tennant; Ellen Verbakel; Helene Brinken

    2018-01-01

    For a readable version of the book, please visit https://book.fosteropenscience.eu A group of fourteen authors came together in February 2018 at the TIB (German National Library of Science and Technology) in Hannover to create an open, living handbook on Open Science training. High-quality trainings are fundamental when aiming at a cultural change towards the implementation of Open Science principles. Teaching resources provide great support for Open Science instructors and trainers. The ...

  2. Handbook on electronic commerce

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M. [Illinois Univ., Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology; Blanning, R. [Vanderbilt Univ., Nashville, TN (United States). Owen Graduate School of Management; Strader, T. [Iowa State Univ., Ames, IA (United States). Management Information Systems; Whinston, A. [eds.] [Texas Univ., Austin, TX (United States). Dept. of Management Science and Information Systems

    2000-07-01

    The world is undergoing a revolution to a digital economy, with pronounced implications for corporate strategy, marketing, operations, information systems, customer services, global supply-chain management, and product distribution. This handbook examines the aspects of electronic commerce, including electronic storefront, on-line business, consumer interface, business-to-business networking, digital payment, legal issues, information product development, and electronic business models. Indispensable for academics, students and professionals who are interested in Electronic Commerce and Internet Business. (orig.)

  3. State of Science: ergonomics and global issues.

    Science.gov (United States)

    Thatcher, Andrew; Waterson, Patrick; Todd, Andrew; Moray, Neville

    2018-02-01

    In his 1993 IEA keynote address, Neville Moray urged the ergonomics discipline to face up to the global problems facing humanity and consider how ergonomics might help find some of the solutions. In this State of Science article we critically evaluate what the ergonomics discipline has achieved in the last two and a half decades to help create a secure future for humanity. Moray's challenges for ergonomics included deriving a value structure that moves us beyond a Westernised view of worker-organisation-technology fit, taking a multidisciplinary approach which engages with other social and biological sciences, considering the gross cross-cultural factors that determine how different societies function, paying more attention to mindful consumption, and embracing the complexity of our interconnected world. This article takes a socio-historical approach by considering the factors that influence what has been achieved since Moray's keynote address. We conclude with our own set of predictions for the future and priorities for addressing the challenges that we are likely to face. Practitioner Summary: We critically reflect on what has been achieved by the ergonomics profession in addressing the global challenges raised by Moray's 1993 keynote address to the International Ergonomics Association. Apart from healthcare, the response has largely been weak and disorganised. We make suggestions for priority research and practice that is required to facilitate a sustainable future for humanity.

  4. Electrical transformer handbook

    Energy Technology Data Exchange (ETDEWEB)

    Hurst, R.W.; Horne, D. (eds.)

    2005-07-01

    This handbook is a valuable user guide intended for electrical engineering and maintenance personnel, electrical contractors and electrical engineering students. It provides current information on techniques and technologies that can help extend the life of transformers. It discusses transformer testing, monitoring, design, commissioning, retrofitting and other elements involved in keeping electrical transformers in safe and efficient operation. It demonstrates how a power transformer can be put to use and common problems faced by owners. In addition to covering control techniques, testing and maintenance procedures, this handbook covers the power transformer; control electrical power transformer; electrical power transformer; electrical theory transformer; used electrical transformer; down electrical step transformer; electrical manufacturer transformer; electrical picture transformer; electrical transformer work; electrical surplus transformer; current transformer; step down transformer; voltage transformer; step up transformer; isolation transformer; low voltage transformer; toroidal transformer; high voltage transformer; and control power transformer. The handbook includes articles from leading experts on overcurrent protection of transformers; ventilated dry-type transformers; metered load factors for low-voltage, and dry-type transformers in buildings. The maintenance of both dry-type or oil-filled transformers was discussed with reference to sealing, gaskets, oils, moisture and testing. The adoption of dynamic load practices was also discussed along with the reclamation or recycling of used lube oil, transformer dielectric fluids and aged solid insulation. A buyer's guide and directory of transformer manufacturers and suppliers was also included. refs., tabs., figs.

  5. Handbook of metaheuristics

    CERN Document Server

    Potvin, Jean-Yves

    2010-01-01

    “… an excellent book if you want to learn about a number of individual metaheuristics." (U. Aickelin, Journal of the Operational Research Society, Issue 56, 2005, on the First Edition) The first edition of the Handbook of Metaheuristics was published in 2003 under the editorship of Fred Glover and Gary A. Kochenberger. Given the numerous developments observed in the field of metaheuristics in recent years, it appeared that the time was ripe for a second edition of the Handbook. When Glover and Kochenberger were unable to prepare this second edition, they suggested that Michel Gendreau and Jean-Yves Potvin should take over the editorship, and so this important new edition is now available. Through its 21 chapters, this second edition is designed to provide a broad coverage of the concepts, implementations and applications in this important field of optimization. Original contributors either revised or updated their work, or provided entirely new chapters. The Handbook now includes updated chapters on the b...

  6. Occupational Clusters.

    Science.gov (United States)

    Pottawattamie County School System, Council Bluffs, IA.

    The 15 occupational clusters (transportation, fine arts and humanities, communications and media, personal service occupations, construction, hospitality and recreation, health occupations, marine science occupations, consumer and homemaking-related occupations, agribusiness and natural resources, environment, public service, business and office…

  7. Mechanical Design Handbook for Elastomers

    Science.gov (United States)

    Darlow, M.; Zorzi, E.

    1986-01-01

    Mechanical Design Handbook for Elastomers reviews state of art in elastomer-damper technology with particular emphasis on applications of highspeed rotor dampers. Self-contained reference but includes some theoretical discussion to help reader understand how and why dampers used for rotating machines. Handbook presents step-by-step procedure for design of elastomer dampers and detailed examples of actual elastomer damper applications.

  8. The small library manager's handbook

    CERN Document Server

    Graves, Alice

    2014-01-01

    The Small Library Manager's Handbook is for librarians working in all types of small libraries. It covers the everyday nuts-and-bolts operations that all librarians must perform. This handbook, written by experts who are small librarians themselves, will help all small librarians to do multiple jobs at the same time.

  9. Handbook for TEAC Auditors, 2011

    Science.gov (United States)

    Teacher Education Accreditation Council, 2011

    2011-01-01

    This handbook is primarily for the Teacher Education Accreditation Council (TEAC) auditor. It is intended to help in preparing for audits of "Inquiry Briefs" and "Inquiry Brief Proposals" and to contribute to the writing of the audit report. This handbook contains a full description of the audit process, the responsibilities of…

  10. Musculoskeletal 2: The effectiveness of participatory ergonomics to prevent low back pain and neck pain: results of a cluster randomised controlled trial. Oral presentations: Day 3: Friday, September 9, 2011. 22nd International Conference on Epidemiology in Occupational Health EPICOH 2011 September 7-9, 2011, Oxford, UK

    NARCIS (Netherlands)

    Driessen, M.; Proper, K.; Anema, J.; Knol, D.; Bongers, P.; Beek, A. van der

    2011-01-01

    Objectives To investigate the effectiveness of the Stay@Work Participatory Ergonomics program (PE) aimed at prevention of low back pain (LBP) and neck pain (NP). Methods Departments were randomly allocated to either the intervention (PE) or control group (no PE). During a 6-h meeting, working groups

  11. The implementation of ergonomics advice and the stage of change approach.

    Science.gov (United States)

    Rothmore, Paul; Aylward, Paul; Karnon, Jonathan

    2015-11-01

    This paper investigates the implementation of injury prevention advice tailored according to the Stage of Change (SOC) approach. The managers of 25 workgroups, drawn from medium to large companies across a wide range of occupational sectors were allocated to receive either standard ergonomics advice or ergonomics advice tailored according to the workgroup SOC. Twelve months after the advice was provided, semi-structured interviews were conducted with each manager. In a multivariate model, managers who had received tailored advice were found to have implemented significantly more of the recommended changes (IRR = 1.68, 95% CI 1.07-2.63) and more "additional" changes (IRR = 1.90, 95% CI 1.12-3.20). Qualitative analysis identified that the key barriers and facilitators to the implementation of changes were largely related to worker resistance to change and the attitudes of senior managers towards health and safety. The findings from this study suggest that the implementation of ergonomics recommendations may be improved by the tailoring of advice according to SOC principles. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  12. Development of ergonomics audits for bagging, haul truck and maintenance and repair operations in mining.

    Science.gov (United States)

    Dempsey, Patrick G; Pollard, Jonisha; Porter, William L; Mayton, Alan; Heberger, John R; Gallagher, Sean; Reardon, Leanna; Drury, Colin G

    2017-12-01

    The development and testing of ergonomics and safety audits for small and bulk bag filling, haul truck and maintenance and repair operations in coal preparation and mineral processing plants found at surface mine sites is described. The content for the audits was derived from diverse sources of information on ergonomics and safety deficiencies including: analysis of injury, illness and fatality data and reports; task analysis; empirical laboratory studies of particular tasks; field studies and observations at mine sites; and maintenance records. These diverse sources of information were utilised to establish construct validity of the modular audits that were developed for use by mine safety personnel. User and interrater reliability testing was carried out prior to finalising the audits. The audits can be implemented using downloadable paper versions or with a free mobile NIOSH-developed Android application called ErgoMine. Practitioner Summary: The methodology used to develop ergonomics audits for three types of mining operations is described. Various sources of audit content are compared and contrasted to serve as a guide for developing ergonomics audits for other occupational contexts.

  13. Nuclear material accounting handbook

    International Nuclear Information System (INIS)

    2008-01-01

    The handbook documents existing best practices and methods used to account for nuclear material and to prepare the required nuclear material accounting reports for submission to the IAEA. It provides a description of the processes and steps necessary for the establishment, implementation and maintenance of nuclear material accounting and control at the material balance area, facility and State levels, and defines the relevant terms. This handbook serves the needs of State personnel at various levels, including State authorities, facility operators and participants in training programmes. It can assist in developing and maintaining accounting systems which will support a State's ability to account for its nuclear material such that the IAEA can verify State declarations, and at the same time support the State's ability to ensure its nuclear security. In addition, the handbook is useful for IAEA staff, who is closely involved with nuclear material accounting. The handbook includes the steps and procedures a State needs to set up and maintain to provide assurance that it can account for its nuclear material and submit the prescribed nuclear material accounting reports defined in Section 1 and described in Sections 3 and 4 in terms of the relevant agreement(s), thereby enabling the IAEA to discharge its verification function as defined in Section 1 and described in Sections 3 and 4. The contents of the handbook are based on the model safeguards agreement and, where applicable, there will also be reference to the model additional protocol. As a State using The handbook consists of five sections. In Section 1, definitions or descriptions of terms used are provided in relation to where the IAEA applies safeguards or, for that matter, accounting for and control of nuclear material in a State. The IAEA's approach in applying safeguards in a State is also defined and briefly described, with special emphasis on verification. In Section 2, the obligations of the State

  14. Ergonomics, design universal and fashion.

    Science.gov (United States)

    Martins, S B; Martins, L B

    2012-01-01

    People who lie beyond the "standard" model of users often come up against barriers when using fashion products, especially clothing, the design of which ought to give special attention to comfort, security and well-being. The principles of universal design seek to extend the design process for products manufactured in bulk so as to include people who, because of their personal characteristics or physical conditions, are at an extreme end of some dimension of performance, whether this is to do with sight, hearing, reach or manipulation. Ergonomics, a discipline anchored on scientific data, regards human beings as the central focus of its operations and, consequently, offers various forms of support to applying universal design in product development. In this context, this paper sets out a reflection on applying the seven principles of universal design to fashion products and clothing with a view to targeting such principles as recommendations that will guide the early stages of developing these products, and establish strategies for market expansion, thereby increasing the volume of production and reducing prices.

  15. Europe Chapter of the Human Factors and Ergonomics Society Meeting

    National Research Council Canada - National Science Library

    de

    2002-01-01

    The Final Proceedings for Europe Chapter of the Human Factors and Ergonomics Society Meeting, 7 November 2001 - 9 November 2001 This is an interdisciplinary conference in human factors and ergonomics...

  16. Diagnostic guidlines for occupational epicondylitis

    Directory of Open Access Journals (Sweden)

    Patrycja Krawczyk-Szulc

    2015-07-01

    Full Text Available Making final decisions on the occupational etiology of musculoskeletal diseases is often difficult and problematic at every stage of the diagnostic procedure. Taking into account the need to facilitate decision-making about the causal relationship between the diagnosed disease entity and the working conditions guidelines for the recognition of work-related musculoskeletal diseases have been developed. This paper presents the guidelines for the diagnosis of occupational etiology of humeral epicondylitis, one of the most common occupational disease of the musculoskeletal system in Poland. The developed guidelines have been based on the literature data concerning occupational risk factors of humeral epicondylitis, workload classification, including repetitive movements, awkward postures, and force. Some criteria applied in ergonomic evaluation methods were also included. The presented diagnostic guidelines define approximate benchmarks for stating (after excluding non-occupational etiology that the identified humeral epicondylitis, is related to the way of working. Crucial work factors that should be analyzed include an operating time of movements overloading tendons connecting to the epicondyle, repetition and force used to perform occupational activities. The developed guidelines are aimed to facilitate occupational physicians diagnostic and certification procedures in case of humeral epicondylitis and determination whether there is a likelihood of its occupational etiology. Med Pr 2015;66(3:443–450

  17. Centrifugal pump handbook

    CERN Document Server

    Pumps, Sulzer

    2010-01-01

    This long-awaited new edition is the complete reference for engineers and designers working on pump design and development or using centrifugal pumps in the field. This authoritative guide has been developed with access to the technical expertise of the leading centrifugal pump developer, Sulzer Pumps. In addition to providing the most comprehensive centrifugal pump theory and design reference with detailed material on cavitation, erosion, selection of materials, rotor vibration behavior and forces acting on pumps, the handbook also covers key pumping applications topics and operational

  18. Near field communications handbook

    CERN Document Server

    Ahson, Syed A; Furht, Borko

    2011-01-01

    Near Field Communication, or NFC, is a short-range high frequency wireless communication technology that enables the exchange of data between devices over about a decimeter. The technology is a simple extension of the ISO 14443 proximity-card standard (contact less card, RFID) that combines the interface of a smart card and a reader into a single device with practical implications. A complete reference for NFC, this handbook provides technical information about all aspects of NFC, as well as applications. It covers basic concepts as well as research grade material and includes a discussion of

  19. Handbook for sound engineers

    CERN Document Server

    Ballou, Glen

    2013-01-01

    Handbook for Sound Engineers is the most comprehensive reference available for audio engineers. All audio topics are explored: if you work on anything related to audio you should not be without this book! The 4th edition of this trusted reference has been updated to reflect changes in the industry since the publication of the 3rd edition in 2002 -- including new technologies like software-based recording systems such as Pro Tools and Sound Forge; digital recording using MP3, wave files and others; mobile audio devices such as iPods and MP3 players. Over 40 topic

  20. Handbook for sound engineers

    CERN Document Server

    Ballou, Glen

    2015-01-01

    Handbook for Sound Engineers is the most comprehensive reference available for audio engineers, and is a must read for all who work in audio.With contributions from many of the top professionals in the field, including Glen Ballou on interpretation systems, intercoms, assistive listening, and fundamentals and units of measurement, David Miles Huber on MIDI, Bill Whitlock on audio transformers and preamplifiers, Steve Dove on consoles, DAWs, and computers, Pat Brown on fundamentals, gain structures, and test and measurement, Ray Rayburn on virtual systems, digital interfacing, and preamplifiers

  1. Steel designers' handbook

    CERN Document Server

    Gorenc, Branko; Tinyou, Ron

    2012-01-01

    The Revised 7th Edition of Steel Designers' Handbook is an invaluable tool for all practising structural, civil and mechanical engineers as well as engineering students at university and TAFE in Australia and New Zealand. It has been prepared in response to changes in the design Standard AS 4100, the structural Design Actions Standards, AS /ANZ 1170, other processing Standards such as welding and coatings, updated research as well as feedback from users. This edition is based on Australian Standard (AS) 4100: 1998 and subsequent amendments. The worked numerical examples in the book have been e

  2. Handbook of integral equations

    CERN Document Server

    Polyanin, Andrei D

    2008-01-01

    This handbook contains over 2,500 integral equations with solutions as well as analytical and numerical methods for solving linear and nonlinear equations. It explores Volterra, Fredholm, WienerHopf, Hammerstein, Uryson, and other equations that arise in mathematics, physics, engineering, the sciences, and economics. This second edition includes new chapters on mixed multidimensional equations and methods of integral equations for ODEs and PDEs, along with over 400 new equations with exact solutions. With many examples added for illustrative purposes, it presents new material on Volterra, Fredholm, singular, hypersingular, dual, and nonlinear integral equations, integral transforms, and special functions.

  3. Electric power distribution handbook

    CERN Document Server

    Short, Thomas Allen

    2014-01-01

    Of the ""big three"" components of electrical infrastructure, distribution typically gets the least attention. In fact, a thorough, up-to-date treatment of the subject hasn't been published in years, yet deregulation and technical changes have increased the need for better information. Filling this void, the Electric Power Distribution Handbook delivers comprehensive, cutting-edge coverage of the electrical aspects of power distribution systems. The first few chapters of this pragmatic guidebook focus on equipment-oriented information and applications such as choosing transformer connections,

  4. Handbook of enumerative combinatorics

    CERN Document Server

    Bona, Miklos

    2015-01-01

    Presenting the state of the art, the Handbook of Enumerative Combinatorics brings together the work of today's most prominent researchers. The contributors survey the methods of combinatorial enumeration along with the most frequent applications of these methods.This important new work is edited by Miklós Bóna of the University of Florida where he is a member of the Academy of Distinguished Teaching Scholars. He received his Ph.D. in mathematics at Massachusetts Institute of Technology in 1997. Miklós is the author of four books and more than 65 research articles, including the award-winning C

  5. Handbook of reference electrodes

    CERN Document Server

    Inzelt, György; Scholz, Fritz

    2013-01-01

    Reference Electrodes are a crucial part of any electrochemical system, yet an up-to-date and comprehensive handbook is long overdue. Here, an experienced team of electrochemists provides an in-depth source of information and data for the proper choice and construction of reference electrodes. This includes all kinds of applications such as aqueous and non-aqueous solutions, ionic liquids, glass melts, solid electrolyte systems, and membrane electrodes. Advanced technologies such as miniaturized, conducting-polymer-based, screen-printed or disposable reference electrodes are also covered. Essen

  6. Computer science handbook

    CERN Document Server

    Tucker, Allen B

    2004-01-01

    Due to the great response to the famous Computer Science Handbook edited by Allen B. Tucker, … in 2004 Chapman & Hall/CRC published a second edition of this comprehensive reference book. Within more than 70 chapters, every one new or significantly revised, one can find any kind of information and references about computer science one can imagine. … All in all, there is absolute nothing about computer science that can not be found in the encyclopedia with its 110 survey articles …-Christoph Meinel, Zentralblatt MATH

  7. Handbook of electromagnetic compatibility

    CERN Document Server

    1995-01-01

    This""know-how""book gives readers a concise understanding of the fundamentals of EMC, from basic mathematical and physical concepts through present, computer-age methods used in analysis, design, and tests. With contributions from leading experts in their fields, the text provides a comprehensive overview. Fortified with information on how to solve potential electromagnetic interference (EMI) problems that may arise in electronic design, practitioners will be betterable to grasp the latest techniques, trends, and applications of this increasingly important engineering discipline.Handbook of E

  8. Communications technology handbook

    CERN Document Server

    Lewis, Geoff

    2013-01-01

    This is the first point of reference for the communications industries. It offers an introduction to a wide range of topics and concepts encountered in the field of communications technology. Whether you are looking for a simple explanation, or need to go into a subject in more depth, the Communications Technology Handbook provides all the information you need in one single volume.This second edition has been updated to include the latest technology including: Video on DemandWire-less Distribution systemsHigh spee

  9. Induction machine handbook

    CERN Document Server

    Boldea, Ion

    2002-01-01

    Often called the workhorse of industry, the advent of power electronics and advances in digital control are transforming the induction motor into the racehorse of industrial motion control. Now, the classic texts on induction machines are nearly three decades old, while more recent books on electric motors lack the necessary depth and detail on induction machines.The Induction Machine Handbook fills industry's long-standing need for a comprehensive treatise embracing the many intricate facets of induction machine analysis and design. Moving gradually from simple to complex and from standard to

  10. HVAC systems design handbook

    CERN Document Server

    Haines, Roger W

    2010-01-01

    Thoroughly updated with the latest codes, technologies, and practices, this all-in-one resource provides details, calculations, and specifications for designing efficient and effective residential, commercial, and industrial HVAC systems. HVAC Systems Design Handbook, Fifth Edition, features new information on energy conservation and computer usage for design and control, as well as the most recent International Code Council (ICC) Mechanical Code requirements. Detailed illustrations, tables, and essential HVAC equations are also included. This comprehensive guide contains everything you need to design, operate, and maintain peak-performing HVAC systems.

  11. Computer Security Handbook

    CERN Document Server

    Bosworth, Seymour; Whyne, Eric

    2012-01-01

    The classic and authoritative reference in the field of computer security, now completely updated and revised With the continued presence of large-scale computers; the proliferation of desktop, laptop, and handheld computers; and the vast international networks that interconnect them, the nature and extent of threats to computer security have grown enormously. Now in its fifth edition, Computer Security Handbook continues to provide authoritative guidance to identify and to eliminate these threats where possible, as well as to lessen any losses attributable to them. With seventy-seven chapter

  12. Geothermal survey handbook

    Energy Technology Data Exchange (ETDEWEB)

    1974-01-01

    The objective of this handbook is to publicize widely the nature of geothermal surveys. It covers geothermal survey planning and measurement as well as measurement of thermal conductivity. Methods for the detection of eruptive areas, the measurement of radiative heat using snowfall, the measurement of surface temperature using infrared radiation and the measurement of thermal flow are described. The book also contains information on physical detection of geothermal reservoirs, the measurement of spring wells, thermographic measurement of surface heat, irregular layer surveying, air thermographics and aerial photography. Isotope measurement techniques are included.

  13. Handbook of purified gases

    CERN Document Server

    Schoen, Helmut

    2015-01-01

    Technical gases are used in almost every field of industry, science and medicine and also as a means of control by government authorities and institutions and are regarded as indispensable means of assistance. In this complete handbook of purified gases the physical foundations of purified gases and mixtures as well as their manufacturing, purification, analysis, storage, handling and transport are presented in a comprehensive way. This important reference work is accompanied with a large number of Data Sheets dedicated to the most important purified gases.  

  14. Handbook of compliant mechanisms

    CERN Document Server

    Howell, Larry L; Olsen, Brian M

    2013-01-01

    A fully illustrated reference book giving an easy-to-understand introduction to compliant mechanisms A broad compilation of compliant mechanisms to give inspiration and guidance to those interested in using compliant mechanisms in their designs, the Handbook of Compliant Mechanisms includes graphics and descriptions of many compliant mechanisms. It comprises an extensive categorization of devices that can be used to help readers identify compliant mechanisms related to their application. It also provides chapters on the basic background in compliant mechanisms, the categories o

  15. Handbook of thermoluminescence

    CERN Document Server

    Furetta, Claudio

    2010-01-01

    This second edition of the Handbook of Thermoluminescence enlarges on all the subjects which were treated in the first edition and adds further arguments, including the theory of thermoluminescent dose measurement, several examples concerning the kinetics parameters determination using various methods such as peak shape, isothermal decay, and so on. A special section is devoted to food irradiation, an important subject at the present time, and to the thermoluminescent characterization of the minerals extracted from the irradiated food. Another new section is devoted to the thermoluminescent ph

  16. Handbook of visual communications

    CERN Document Server

    Hang, Hseuh-Ming

    1995-01-01

    Handbook of Visual Communications explores the latest developments in the field, such as model-based image coding, and provides readers with insight into possible future developments.Key Features* Displays comprehensive coverage from fundamental theory to international standards and VLSI design* Includes 518 pages of contributions from well-known experts* [please keep this feature current with the page count]* Presents state-of-the-art knowledge--the most up-to-date and accurate information on various topics in the field* Provides an extensive overview of international standards for industrial

  17. Embedded systems handbook

    CERN Document Server

    Zurawski, Richard

    2005-01-01

    Embedded systems are nearly ubiquitous, and books on individual topics or components of embedded systems are equally abundant. Unfortunately, for those designers who thirst for knowledge of the big picture of embedded systems there is not a drop to drink. Until now. The Embedded Systems Handbook is an oasis of information, offering a mix of basic and advanced topics, new solutions and technologies arising from the most recent research efforts, and emerging trends to help you stay current in this ever-changing field.With preeminent contributors from leading industrial and academic institutions

  18. Heat pump planning handbook

    CERN Document Server

    Bonin, Jürgen

    2015-01-01

    The Heat Pump Planning Handbook contains practical information and guidance on the design, planning and selection of heat pump systems, allowing engineers, designers, architects and construction specialists to compare a number of different systems and options. Including detailed descriptions of components and their functions and reflecting the current state of technology this guide contains sample tasks and solutions as well as new model calculations and planning evaluations. Also economic factors and alternative energy sources are covered, which are essential at a time of rising heat costs. T

  19. The VLSI handbook

    CERN Document Server

    Chen, Wai-Kai

    2007-01-01

    Written by a stellar international panel of expert contributors, this handbook remains the most up-to-date, reliable, and comprehensive source for real answers to practical problems. In addition to updated information in most chapters, this edition features several heavily revised and completely rewritten chapters, new chapters on such topics as CMOS fabrication and high-speed circuit design, heavily revised sections on testing of digital systems and design languages, and two entirely new sections on low-power electronics and VLSI signal processing. An updated compendium of references and othe

  20. The branch librarians' handbook

    CERN Document Server

    Rivers, Vickie

    2004-01-01

    ""Recommended""--Booklist; ""an excellent addition...highly recommended""--Public Libraries; ""clear...very sound advice...strongly recommend""--Catholic Library World; ""excellent resource...organized...well written""--Against the Grain; ""interesting...thoroughly practical...a very good book...well organized...clearly written""--ARBA. This handbook covers a wide variety of issues that the branch librarian must deal with every day. Chapters are devoted to mission statements (the Dallas Public Library and Dayton Metro Library mission statements are highlighted as examples), library systems,

  1. Circuits and filters handbook

    CERN Document Server

    Chen, Wai-Kai

    2003-01-01

    A bestseller in its first edition, The Circuits and Filters Handbook has been thoroughly updated to provide the most current, most comprehensive information available in both the classical and emerging fields of circuits and filters, both analog and digital. This edition contains 29 new chapters, with significant additions in the areas of computer-aided design, circuit simulation, VLSI circuits, design automation, and active and digital filters. It will undoubtedly take its place as the engineer's first choice in looking for solutions to problems encountered in the design, analysis, and behavi

  2. Handbook of mathematics

    CERN Document Server

    Kuipers, L

    1969-01-01

    International Series of Monographs in Pure and Applied Mathematics, Volume 99: Handbook of Mathematics provides the fundamental mathematical knowledge needed for scientific and technological research. The book starts with the history of mathematics and the number systems. The text then progresses to discussions of linear algebra and analytical geometry including polar theories of conic sections and quadratic surfaces. The book then explains differential and integral calculus, covering topics, such as algebra of limits, the concept of continuity, the theorem of continuous functions (with examp

  3. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2014-01-01

    Seals and Sealing Handbook, 6th Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices. Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failur

  4. Handbook of linear algebra

    CERN Document Server

    Hogben, Leslie

    2013-01-01

    With a substantial amount of new material, the Handbook of Linear Algebra, Second Edition provides comprehensive coverage of linear algebra concepts, applications, and computational software packages in an easy-to-use format. It guides you from the very elementary aspects of the subject to the frontiers of current research. Along with revisions and updates throughout, the second edition of this bestseller includes 20 new chapters.New to the Second EditionSeparate chapters on Schur complements, additional types of canonical forms, tensors, matrix polynomials, matrix equations, special types of

  5. Handbook of algebra

    CERN Document Server

    Hazewinkel, M

    2008-01-01

    Algebra, as we know it today, consists of many different ideas, concepts and results. A reasonable estimate of the number of these different items would be somewhere between 50,000 and 200,000. Many of these have been named and many more could (and perhaps should) have a name or a convenient designation. Even the nonspecialist is likely to encounter most of these, either somewhere in the literature, disguised as a definition or a theorem or to hear about them and feel the need for more information. If this happens, one should be able to find enough information in this Handbook to judge if it i

  6. The SQUID Handbook

    CERN Document Server

    Braginski, Alex I

    2006-01-01

    This two-volume handbook offers a comprehensive and well coordinated presentation of SQUIDs (Superconducting Quantum Interference Devices), including device fundamentals, design, technology, system construction and multiple applications. It is intended to bridge the gap between fundamentals and applications, and will be a valuable textbook reference for graduate students and for professionals engaged in SQUID research and engineering. It will also be of use to specialists in multiple fields of practical SQUID applications, from human brain research and heart diagnostics to airplane and nuclear

  7. Leybold vacuum handbook

    CERN Document Server

    Diels, K; Diels, Kurt

    1966-01-01

    Leybold Vacuum Handbook presents a collection of data sets that are essential for numerical calculation of vacuum plants and vacuum processes. The title first covers vacuum physics, which includes gas kinetics, flow phenomena, vacuum gauges, and vapor removal. Next, the selection presents data on vacuum, high vacuum process technology, and gas desorption and gettering. The text also deals with materials, vapor pressure, boiling and melting points, and gas permeability. The book will be of great interest to engineers and technicians that deals with vacuum related technologies.

  8. Electric motor handbook

    CERN Document Server

    Chalmers, B J

    2013-01-01

    Electric Motor Handbook aims to give practical knowledge in a wide range of capacities such as plant design, equipment specification, commissioning, operation and maintenance. The book covers topics such as the modeling of steady-state motor performance; polyphase induction, synchronous, and a.c. commutator motors; ambient conditions, enclosures, cooling and loss dissipation; and electrical supply systems and motor drives. Also covered are topics such as variable-speed drives and motor control; materials and motor components; insulation types, systems, and techniques; and the installation, sit

  9. Handbook of information science

    CERN Document Server

    Stock, Wolfgang G

    2013-01-01

    Dealing with information is one of the vital skills in thetwenty-first century. It takes a fair degree of information savvy to create, represent and supply information as well as to search for and retrieve relevant knowledge. This Handbook is a basic work of information science, providing a comprehensive overview of the current state of information retrieval and knowledge representation. It addresses readers from all professions and scientific disciplines, but particularly scholars, practitioners and students of Information Science, Library Science, Computer Science, Information Management, an

  10. Mechanical design engineering handbook

    CERN Document Server

    Childs, Peter R N

    2013-01-01

    Mechanical Design Engineering Handbook is a straight-talking and forward-thinking reference covering the design, specification, selection, use and integration of machine elements fundamental to a wide range of engineering applications. Develop or refresh your mechanical design skills in the areas of bearings, shafts, gears, seals, belts and chains, clutches and brakes, springs, fasteners, pneumatics and hydraulics, amongst other core mechanical elements, and dip in for principles, data and calculations as needed to inform and evaluate your on-the-job decisions. Covering the full spectrum

  11. AVR RISC microcontroller handbook

    CERN Document Server

    Kuhnel, Claus

    1998-01-01

    The AVR RISC Microcontroller Handbook is a comprehensive guide to designing with Atmel's new controller family, which is designed to offer high speed and low power consumption at a lower cost. The main text is divided into three sections: hardware, which covers all internal peripherals; software, which covers programming and the instruction set; and tools, which explains using Atmel's Assembler and Simulator (available on the Web) as well as IAR's C compiler.Practical guide for advanced hobbyists or design professionalsDevelopment tools and code available on the Web

  12. DOE fundamentals handbook: Chemistry

    International Nuclear Information System (INIS)

    1993-01-01

    This handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of chemistry. This volume contains the following modules: reactor water chemistry (effects of radiation on water chemistry, chemistry parameters), principles of water treatment (purpose; treatment processes [ion exchange]; dissolved gases, suspended solids, and pH control; water purity), and hazards of chemicals and gases (corrosives [acids, alkalies], toxic compounds, compressed gases, flammable/combustible liquids)

  13. CRC handbook of modern telecommunications

    CERN Document Server

    Morreale, Patricia A

    2001-01-01

    This authoritative handbook, contributed to by a team of international experts, covers the most dynamic areas in the changing telecommunications landscape. Written for telecommunications specialists who implement the new technologies, The CRC Handbook of Modern Telecommunications is an excellent companion volume to the authors' The Telecommunications Handbook, but stands well on its own, as it extends the range of topics to include voice over Internet, traffic management, quality of service, and other dominant future trends. It is an indispensable reference for all professionals working in the

  14. Development of a method to assess compliance with ergonomic posture in dental students

    Science.gov (United States)

    Garcia, Patrícia Petromilli Nordi Sasso; Wajngarten, Danielle; Campos, Juliana Alvares Duarte Bonini

    2018-01-01

    CONTEXT: The ergonomic posture protocol is extremely important for the maintenance of occupational health in dentistry. The lack of compliance with this protocol results in a high risk of developing musculoskeletal disorders. AIMS: This study developed a direct observation method for the evaluation of dental student compliance with ergonomic posture protocol. SUBJECTS AND METHODS: The method is named compliance assessment of dental ergonomic posture requirements (CADEP). During the development of the method, 14 items were elaborated considering the theory of dental ergonomics. Each item should be classified as appropriate, partially appropriate, or inappropriate. After evaluation, all item values should be added, and the final score expressed as the percent of compliance with correct postures, with a score range of 0%–100%. STATISTICAL ANALYSIS USED: The reliability of CADEP was assessed through intra- and interobserver reproducibility. For the CADEP application, 73 senior year students from the undergraduate course in dentistry were evaluated. The intra- and interexaminer concordance was estimated using the intraclass correlation coefficient (ρ). A descriptive statistical analysis was performed. RESULTS: The reproducibility of evaluator 1 (ρ =0.90; confidence interval [CI] 95%: 0.83–0.94), evaluator 2 (ρ = 0.83; CI 95%: 0.70–0.90), the interexaminer in the first evaluation (ρ = 0.81; CI 95%:0.67–0.89), and in the second one (ρ = 0.76; CI 95%: 0.59–0.87) was classified as good. In the analysis of the compliance, it was verified that moderate compliance was the most prevalent among the evaluated students (65.6%, CI 95%: 60.3%–70.7%). CONCLUSIONS: CADEP was valid and reliable for the assessment of dentistry students’ compliance regarding ergonomic posture requirements. PMID:29693025

  15. Is a participatory approach effective to stimulate using ergonomic measures?

    NARCIS (Netherlands)

    Molen, H.F. van der; Sluiter, J.K.; Hulshof, C.T.J.; Vink, P.; Duivenbooden, J.C. van; Holman, R.; Frings-Dresen, M.H.W.

    2006-01-01

    The objective of this study was to examine the effect of a participatory ergonomics (PE) implementation strategy on the use of ergonomic measures reducing the physical work demands of construction work. The ergonomic measures consisted of adjusting working height (two measures) and mechanising the

  16. Ergonomic measures in construction work: enhancing evidence-based implementation

    NARCIS (Netherlands)

    Visser, S.

    2015-01-01

    Despite the development and availability of ergonomic measures in the construction industry, the number of construction workers reporting high physical work demands remains high. A reduction of the high physical work demands can be achieved by using ergonomic measures. However, these ergonomic

  17. Applying research to practice: generalist and specialist (visual ergonomics) consultancy.

    Science.gov (United States)

    Long, Jennifer; Long, Airdrie

    2012-01-01

    Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants--generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.

  18. An economic evaluation of a participatory ergonomics process in an auto parts manufacturer.

    Science.gov (United States)

    Tompa, Emile; Dolinschi, Roman; Laing, Andrew

    2009-01-01

    We assess the costs and consequences of a participatory ergonomics process at a Canadian car parts manufacturer from the perspective of the firm. Regression modeling was used with interrupted time series data to assess the impact of the process on several health measures. Consequences were kept in natural units for cost-effectiveness analysis, and translated into monetary units for cost-benefit analysis. The duration of disability insurance claims and the number of denied workers' compensation claims was significantly reduced. The cost-effectiveness ratio is $12.06 per disability day averted. The net present value is $244,416 for a 23-month period with a benefit-to-cost ratio of 10.6, suggesting that the process was worth undertaking (monetary units in 2001 Canadian dollars). Our findings emphasize the importance of considering a range of outcomes when evaluating an occupational health and safety intervention. Participatory ergonomics process can be cost-effective for a firm.

  19. Ergonomics in the arctic - a study and checklist for heavy machinery in open pit mining.

    Science.gov (United States)

    Reiman, Arto; Sormunen, Erja; Morris, Drew

    2016-11-22

    Heavy mining vehicle operators at arctic mines have a high risk of discomfort, musculoskeletal disorders and occupational accidents. There is a need for tailored approaches and safety management tools that take into account the specific characteristics of arctic work environments. The aim of this study was to develop a holistic evaluation tool for heavy mining vehicles and operator well-being in arctic mine environments. Data collection was based on design science principles and included literature review, expert observations and participatory ergonomic sessions. As a result of this study, a systemic checklist was developed and tested by eight individuals in a 350-employee mining environment. The checklist includes sections for evaluating vehicle specific ergonomic and safety aspects from a technological point of view and for checking if the work has been arranged so that it can be performed safely and fluently from an employee's point of view.

  20. Poor sitting posture and a heavy schoolbag as contributors to musculoskeletal pain in children: an ergonomic school education intervention program

    Directory of Open Access Journals (Sweden)

    Syazwan AI

    2011-09-01

    Full Text Available AI Syazwan1, MN Mohamad Azhar1, AR Anita1, HS Azizan1, MS Shaharuddin2, J Muhamad Hanafiah3, AA Muhaimin4, AM Nizar5, B Mohd Rafee1,6, A Mohd Ibthisham7, Adam Kasani71Environmental and Occupational Medicine Unit, Department of Community Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 2Environmental and Occupational Health Unit, Department of Community Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 3Health Services Management Unit, Department of Community Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 4Department of Environmental Management, Faculty of Environmental Studies, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 5Pharmacology Unit, Department of Human Anatomy, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 6Ergonomic Division, National Institute of Occupational Safety and Health Bangi, Selangor, Malaysia; 7Department of Mechanical Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, MalaysiaObjectives: The purpose of this study was to evaluate a multidisciplinary, interventional, ergonomic education program designed to reduce the risk of musculoskeletal problems by reducing schoolbag weight and correcting poor sitting posture.Methods: Data were collected twice before and twice following intervention using the Standardized Nordic Body Map Questionnaire, a rapid upper limb assessment for posture evaluation, and schoolbag weight measurement in children aged 8 and 11 years attending two schools within the central region of Malaysia.Results: Students who received the ergonomic intervention reported significant improvements in their sitting posture in a classroom environment and reduction of schoolbag weight as compared with the controls.Conclusion: A single-session, early

  1. Integrating ergonomics into the product development process

    DEFF Research Database (Denmark)

    Broberg, Ole

    1997-01-01

    and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

  2. Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial

    Science.gov (United States)

    2014-01-01

    strategies. When these strategies are effective, implementation within occupational health services can take place to guide construction companies (and others) with the implementation of ergonomic measures. Trail registration Trailnumber: ISRCTN73075751, Date of registration: 30 July 2013. PMID:24742300

  3. Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial.

    Science.gov (United States)

    Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

    2014-04-17

    effective, implementation within occupational health services can take place to guide construction companies (and others) with the implementation of ergonomic measures. [corrected] Trailnumber: ISRCTN73075751, Date of registration: 30 July 2013.

  4. Ergonomic Evaluations of Microgravity Workstations

    Science.gov (United States)

    Whitmore, Mihriban; Berman, Andrea H.; Byerly, Diane

    1996-01-01

    Various gloveboxes (GBXs) have been used aboard the Shuttle and ISS. Though the overall technical specifications are similar, each GBX's crew interface is unique. JSC conducted a series of ergonomic evaluations of the various glovebox designs to identify human factors requirements for new designs to provide operator commonality across different designs. We conducted 2 0g evaluations aboard the Shuttle to evaluate the material sciences GBX and the General Purpose Workstation (GPWS), and a KC-135 evaluation to compare combinations of arm hole interfaces and foot restraints (flexible arm holes were better than rigid ports for repetitive fine manipulation tasks). Posture analysis revealed that the smallest and tallest subjects assumed similar postures at all four configurations, suggesting that problematic postures are not necessarily a function of the operator s height but a function of the task characteristics. There was concern that the subjects were using the restrictive nature of the GBX s cuffs as an upper-body restraint to achieve such high forces, which might lead to neck/shoulder discomfort. EMG data revealed more consistent muscle performance at the GBX; the variability in the EMG profiles observed at the GPWS was attributed to the subjects attempts to provide more stabilization for themselves in the loose, flexible gauntlets. Tests revealed that the GBX should be designed for a 95 percentile American male to accommodate a neutral working posture. In addition, the foot restraint with knee support appeared beneficial for GBX operations. Crew comments were to provide 2 foot restraint mechanical modes, loose and lock-down, to accommodate a wide range of tasks without egressing the restraint system. Thus far, we have developed preliminary design guidelines for GBXs and foot.

  5. Handbook of mass measurement

    CERN Document Server

    Jones, Frank E

    2002-01-01

    "How much does it weigh?" seems a simple question. To scientists and engineers, however, the answer is far from simple, and determining the answer demands consideration of an almost overwhelming number of factors.With an intriguing blend of history, fundamentals, and technical details, the Handbook of Mass Measurement sets forth the details of achieving the highest precision in mass measurements. It covers the whole field, from the development, calibration, and maintenance of mass standards to detailed accounts of weighing designs, balances, and uncertainty. It addresses the entire measurement process and provides in-depth examinations of the various factors that introduce error.Much of the material is the authors'' own work and some of it is published here for the first time. Jones and Schoonover are both highly regarded veterans of the U.S. National Institute of Standards and Technology. With this handbook, they have provided a service and resource vital to anyone involved not only in the determination of m...

  6. The electric motor handbook

    Energy Technology Data Exchange (ETDEWEB)

    Hurst, R.W.; Feltham, P. (eds.)

    2004-05-01

    This handbook outlines the important role that electric motors play in modern society. It covers the field of motor applications from various motor types to their use and repair. It also presents practical applications of electric motors and methods on motor efficiency. More than half of all electricity generated, and 75 per cent of all industrial electricity consumption is consumed by electric motors. Electrical personnel must be aware of all factors involved in electric motors in order to choose and apply the appropriate size of electric motor. These factors include efficiency, sizing and proper application. The efficient use and maximum life expectancy of electric motors depends on proper motor protection, control and maintenance. This handbook includes articles from leading experts on electric motors in modern electrical systems. The content includes: design considerations; proper electric motor sizing techniques; optimal electric motor application; electric motor protection technology; electric motor control principles; electric motor maintenance and troubleshooting; induction electric motors; electric motor bearing currents; electric motor bearing lubrication; electromagnetism; electric motor enclosures; electric motor testing; electric motor repair; DC electric motor; electric motor starters; electric motor brushes; industrial electric motors; electric motor diagrams; AC electric motors; electric motor wiring; electric motor service; electric motor rewinding; electric motor winding; diagram of electric motor wiring; electric motor kit; and, troubleshooting electric motors. A directory of motor manufacturers and suppliers was also included. refs., tabs., figs.

  7. Handbook of ecotoxicology

    Science.gov (United States)

    Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John

    1995-01-01

    The Handbook of Ecotoxicology offers 34 chapters with contributions from over 50 selected international experts. The book is divided into four major sections: I. Quantifying and Measuring Ecotoxicological Effects, II. Contaminant Sources and Effects, III. Case Histories and Ecosystem Surveys, and IV. Methods for Making Estimates and Predictability in Ecotoxicology. Concepts and methodology are presented for many types of aquatic and terrestrial ecotoxicity test protocols for both controlled and field assessments. Chapters are offered on such diverse topics as sediment and soil ecotoxicity, landscape indicators, biomonitoring, and use of current bioindicators. The roles of deforestation and global warming, pathogens and disease in ecotoxicology, abiotic factors, urban runoff, predictive ecotoxicology, population modeling, and restoration ecology are discussed. This book was designed to serve as a reference book for students entering the fields of ecotoxicology, aquatic toxicology, terrestrial wildlife toxicology, and other environmental sciences. Many portions of this handbook will serve as a convenient reference text for established investigators, resource managers, and those involved in risk assessment and risk management within regulatory agencies and the private sector.

  8. Handbook of radiation effects

    International Nuclear Information System (INIS)

    Holmes-Siedle, A.; Adams, L.

    1993-01-01

    This handbook is intended to serve as a tool for designers of equipment and scientific instruments in cases where they are required to ensure the survival of the equipment in radiation environments. High-technology materials, especially semiconductors and optics, tend to degrade on exposure to radiation in many different ways. Intense high-energy radiation environments are found in nuclear reactors and accelerators, machines for radiation therapy, industrial sterilization, and space. Some engineers have to build equipment which will survive a nuclear explosion from a hostile source. Proper handling of a disaster with radioactive materials requires equipment which depends utterly on semiconductor microelectronics and imaging devices. Thus the technology of radiation-tolerant electronics is an instrument for good social spheres as diverse as disaster planning and the exploration of Mars. In order to design equipment for intense environments like those described above, then degradation from high-energy irradiation must be seen as a basic design parameter. The aim of this handbook is to assist the engineer or student in that thought; to make it possible to write intelligent specifications; to offer some understanding of the complex variety of effects which occur when high-technology components encounter high-energy radiation; and to go thoroughly into the balance of choices of how to alleviate the effects and hence achieve the design aims of the project. Separate abstracts were prepared for 15 chapters of this book

  9. Renewable energy handbook

    Energy Technology Data Exchange (ETDEWEB)

    Fine, R

    1976-01-01

    The potential for renewable energy use in Canada is examined. It is pointed out that Canada can choose to begin to diversify its energy supply now, moving rapidly and smoothly towards an efficient energy society based on renewable energy sources; or, it can continue on its present course and face the possibility of being forced by necessity to make a later transition to renewable sources, probably with a great deal of economic and political disruption. The handbook begins with a discussion on major issues and options available. This second section deals with the technology, applications, and costs of direct solar energy utilization, solar thermal electricity generation, photovoltaic conversion, wind energy, biomass energy, tidal power, wave energy, ocean thermal energy, geothermal energy, heat pumps, and energy storage. Section three discusses how renewable energy might realistically supply Canada's energy requirements within a reasonable period of time. Some issues on how government, industry, and the individual may become involved to make this happen are suggested. A list of resource people and renewable energy businesses is provided in the last section. A recommended reading list and bibliography complete the handbook. (MCW)

  10. Photovoltaic Incentive Design Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Hoff, T. E.

    2006-12-01

    Investments in customer-owned grid-connected photovoltaic (PV) energy systems are growing at a steady pace. This is due, in part, to the availability of attractive economic incentives offered by public state agencies and utilities. In the United States, these incentives have largely been upfront lump payments tied to the system capacity rating. While capacity-based ''buydowns'' have stimulated the domestic PV market, they have been criticized for subsidizing systems with potentially poor energy performance. As a result, the industry has been forced to consider alternative incentive structures, particularly ones that pay based on long-term measured performance. The industry, however, lacks consensus in the debate over the tradeoffs between upfront incentive payments versus longer-term payments for energy delivery. This handbook is designed for agencies and utilities that offer or intend to offer incentive programs for customer-owned PV systems. Its purpose is to help select, design, and implement incentive programs that best meet programmatic goals. The handbook begins with a discussion of the various available incentive structures and then provides qualitative and quantitative tools necessary to design the most appropriate incentive structure. It concludes with program administration considerations.

  11. Risk assessment handbook

    International Nuclear Information System (INIS)

    Farmer, F.G.; Jones, J.L.; Hunt, R.N.; Roush, M.L.; Wierman, T.E.

    1990-09-01

    The Probabilistic Risk Assessment Unit at EG ampersand G Idaho has developed this handbook to provide guidance to a facility manager exploring the potential benefit to be gained by performance of a risk assessment properly scoped to meet local needs. This document is designed to help the manager control the resources expended commensurate with the risks being managed and to assure that the products can be used programmatically to support future needs in order to derive maximum beneflt from the resources expended. We present a logical and functional mapping scheme between several discrete phases of project definition to ensure that a potential customer, working with an analyst, is able to define the areas of interest and that appropriate methods are employed in the analysis. In addition the handbook is written to provide a high-level perspective for the analyst. Previously, the needed information was either scattered or existed only in the minds of experienced analysts. By compiling this information and exploring the breadth of knowledge which exists within the members of the PRA Unit, the functional relationships between the customers' needs and the product have been established

  12. Ergonomics as a missing part of sustainability.

    Science.gov (United States)

    Pavlovic-Veselinovic, Sonja

    2014-01-01

    In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

  13. Ergonomía. Vol. 1, Fundamentos

    OpenAIRE

    Rodríguez Mondelo, Pedro Manuel; Gregori Torada, Enrique; Barrau Bombardó, Pedro

    2001-01-01

    La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

  14. Occupational health services in PR China

    International Nuclear Information System (INIS)

    Liang Youxin; Xiang Quanyong

    2004-01-01

    In China, the origin of occupational health started in the mid 1950s soon after the founding of the People's Republic of China. However, more complete concept and practice of occupational health was defined after the early 1980s, when China started her full-scale drive for economic reform and policy of openness. The integrity intends to cover occupational health, occupational medicine, industrial toxicology, industrial hygiene, occupational ergonomics, and occupational psychology as theoretical and practical components of occupational health. As a result, occupational health in China has undergone many changes and has improved over the past decades. These changes and improvements came about, most likely due to a new scheme, where a holistic approach of the recognition, regulation, and provision of occupational health services in a wider coverage is gradually formed and brought into effect. This presentation provides the current status of occupational health and safety problems, the latest legislative to occupational health and safety, and a general scenario of the organizational structure and function of occupational health services in China. It attempts to share with participants both our experience and lessons learned towards creating a more open and effective channel of ideas and information sharing

  15. Handbook of unmanned aerial vehicles

    CERN Document Server

    Vachtsevanos, George

    2015-01-01

    The Handbook of Unmanned Aerial Vehicles is a reference text for the academic and research communities, industry, manufacturers, users, practitioners, Federal Government, Federal and State Agencies, the private sector, as well as all organizations that are and will be using unmanned aircraft in a wide spectrum of applications. The Handbook covers all aspects of UAVs, from design to logistics and ethical issues. It is also targeting the young investigator, the future inventor and entrepreneur by providing an overview and detailed information of the state-of-the-art as well as useful new concepts that may lead to innovative research. The contents of the Handbook include material that addresses the needs and ‘know how’ of all of the above sectors targeting a very diverse audience. The Handbook offers a unique and comprehensive treatise of everything one needs to know about unmanned aircrafts, from conception to operation, from technologies to business activities, users, OEMs, reference sources, conferences, ...

  16. Wind energy a reference handbook

    CERN Document Server

    Newton, PhD, David E

    2014-01-01

    While covering the fascinating history of wind power as a whole, this timely handbook focuses on current technological developments and the promise--and pitfalls--of wind energy as part of the world's energy future.

  17. Shallow-land-burial handbook

    International Nuclear Information System (INIS)

    Boegly, W.J. Jr.; Davis, E.C.

    1981-01-01

    The initial draft of the Shallow-Land Burial Handbook has been prepared and submitted to the DOE Low-Level Waste Management Program for review and comment. The Handbook informs the reader of the current way in which low-level wastes are being handled, outlines the legal and institutional problems that would be involved in developing and licensing such a facility, and describes in some detail the considerations and data needs for siting, designing, operating, and closing such a facility. The initial draft is not a Handbook that provides answers to all questions, nor insures that following the steps detailed in the Handbook guarantees that the facility will be licensed. It does illustrate the types of actions that must be considered and the types of information required to achieve successful operations

  18. Developer's handbook of interactive multimedia

    CERN Document Server

    Phillips, Robin

    2014-01-01

    New technology is being used more and more in education and providers have to be aware of what is on offer and how it can be used. This practical handbook demonstrates how interactive multimedia can be developed for educational application.

  19. Hanford Facility RCRA permit handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Purpose of this Hanford Facility (HF) RCRA Permit Handbook is to provide, in one document, information to be used for clarification of permit conditions and guidance for implementing the HF RCRA Permit.

  20. WIPP Project Records Management Handbook

    International Nuclear Information System (INIS)

    1991-01-01

    The Waste Isolation Pilot Plant (WIPP) Records Management Handbook provides the WIPP Project Records Management personnel with a tool to use to fulfill the requirements of the WIPP Records Program and direct their actions in the important area of records management. The handbook describes the various project areas involved in records management, and how they function. The handbook provides the requirements for Record Coordinators and Master Record Center (MRC) personnel to follow in the normal course of file management, records scheduling, records turnover, records disposition, and records retrieval. More importantly, the handbook provides a single reference which encompasses the procedures set fourth in DOE Order 1324.2A, ''Records Disposition'' ASME NQA-1, ''Quality Assurance Program Requirements for Nuclear Facilities'' and DOE-AL 5700.6B, ''General Operations Quality Assurance.'' These documents dictate how an efficient system of records management will be achieved on the WIPP Project

  1. Urban Farm Business Plan Handbook

    Science.gov (United States)

    The Urban Farm Business Plan Handbook (this document) provides guidance for developing a business plan for the startup and operation of an urban farm. It focuses on food and non-food related cultivated agriculture.

  2. Safety voice for ergonomics (SAVE project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices

    Directory of Open Access Journals (Sweden)

    Laurel D. Kincl

    2016-04-01

    Full Text Available Abstract Background Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack “soft skills” training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program – SAfety Voice for Ergonomics – strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Methods/design Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group: (1 ergonomics training only, (2 safety voice training only, (3 combined ergonomics and safety voice training, or (4 control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include

  3. Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

    Science.gov (United States)

    Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

    2016-04-27

    Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of

  4. Handbook of signal processing systems

    CERN Document Server

    Deprettere, Ed; Leupers, Rainer; Takala, Jarmo

    2013-01-01

    Handbook of Signal Processing Systems is organized in three parts. The first part motivates representative applications that drive and apply state-of-the art methods for design and implementation of signal processing systems; the second part discusses architectures for implementing these applications; the third part focuses on compilers and simulation tools, describes models of computation and their associated design tools and methodologies. This handbook is an essential tool for professionals in many fields and researchers of all levels.

  5. Ergonomics for enhancing detection of machine abnormalities.

    Science.gov (United States)

    Illankoon, Prasanna; Abeysekera, John; Singh, Sarbjeet

    2016-10-17

    Detecting abnormal machine conditions is of great importance in an autonomous maintenance environment. Ergonomic aspects can be invaluable when detection of machine abnormalities using human senses is examined. This research outlines the ergonomic issues involved in detecting machine abnormalities and suggests how ergonomics would improve such detections. Cognitive Task Analysis was performed in a plant in Sri Lanka where Total Productive Maintenance is being implemented to identify sensory types that would be used to detect machine abnormalities and relevant Ergonomic characteristics. As the outcome of this research, a methodology comprising of an Ergonomic Gap Analysis Matrix for machine abnormality detection is presented.

  6. Achieving LEED credit for ergonomics: Laying the foundation.

    Science.gov (United States)

    Lynch, Mallory

    2014-01-01

    Despite guidance from the United States Green Building Council (USGBC) on the requirements for earning a Leadership in Energy and Environmental Design (LEED) ergonomics credit in the Innovation in Design and Innovation in Operations category, few projects have received the credit. The University of California, Berkeley ergonomics program, Ergonomics@Work, has aligned the ergonomics strategy to those of the USGBC and LEED to achieve the ergonomics credit in several new buildings. This article describes the steps needed to obtain the credit and highlights the opportunities it creates to partner with the project team to promote ergonomics. As a profession it is up to ergonomists to create the road map that incorporates ergonomics into the green building design.

  7. The Changes of Ergonomics in Hungary and Engineering Education

    Directory of Open Access Journals (Sweden)

    Istvan Lükö

    2013-01-01

    Full Text Available Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-technical systems. Here, we present the developmental stages of ergonomics, divided into six periods, first, and then the relationship between environmental ergonomics and health and safety. In the last chapter, I shall expound a few details from Hungarian investigations in work psychology, as well as from the activity of prominent academic circles at certain universities.

  8. Services Subcontract Technical Representative (STR) handbook

    International Nuclear Information System (INIS)

    Houston, D.H.

    1997-06-01

    The purpose of this handbook is to provide guidance to Bechtel Hanford, Inc. Subcontract Representatives in their assignments. It is the intention of this handbook to ensure that subcontract work is performed in accordance with the subcontract documents

  9. Process evaluation of a participatory ergonomics programme to prevent low back pain and neck pain among workers

    Directory of Open Access Journals (Sweden)

    Driessen Maurice T

    2010-08-01

    Full Text Available Abstract Background Both low back pain (LBP and neck pain (NP are major occupational health problems. In the workplace, participatory ergonomics (PE is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled trials (RCTs is scarce. This study evaluates the process of the Stay@Work participatory ergonomics programme, including the perceived implementation of the prioritised ergonomic measures. Methods This cluster-RCT was conducted at the departments of four Dutch companies (a railway transportation company, an airline company, a steel company, and a university including its university medical hospital. Directly after the randomisation outcome, intervention departments formed a working group that followed the steps of PE during a six-hour working group meeting. Guided by an ergonomist, working groups identified and prioritised risk factors for LBP and NP, and composed and prioritised ergonomic measures. Within three months after the meeting, working groups had to implement the prioritised ergonomic measures at their department. Data on various process components (recruitment, reach, fidelity, satisfaction, and implementation components, i.e., dose delivered and dose received were collected and analysed on two levels: department (i.e., working group members from intervention departments and participant (i.e., workers from intervention departments. Results A total of 19 intervention departments (n = 10 with mental workloads, n = 1 with a light physical workload, n = 4 departments with physical and mental workloads, and n = 4 with heavy physical workloads were recruited for participation, and the reach among working group members who participated was high (87%. Fidelity and satisfaction towards the PE programme rated by the working group members was good (7.3 or higher. The same was found for the Stay@Work ergocoach training (7.5 or higher. In total, 66

  10. Technical handbook on the National Arrangements for Incidents involving Radioactivity. NAIR technical handbook

    International Nuclear Information System (INIS)

    McColl, N.P.; Kruse, P.

    2002-01-01

    This Technical Handbook contains information for radiation specialists participating in the National Arrangements for Incidents involving Radioactivity (NAIR). Together with the NAIR Users Handbook 2000 edition, it updates and replaces the NAIR Handbook published in 1995. The Users Handbook was designed for those who might seek assistance through NAIR, principally the police or other emergency services. Both Handbooks are reproduced on the NRPB website (www.nrpb.org) and are available from NRPB

  11. Prontuario para la Ensenanza del Curso Asistente de Salud en el Hogar. Documento de Trabajo (Handbook for the Home Health Aide Course. Working Document).

    Science.gov (United States)

    Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

    This handbook is intended for a 2-year secondary course for home health aides. Introductory information includes a description of the occupation, prerequisites, general objectives, and a chart depicting the number of hours and weeks devoted to each unit. The course outline covers 12 units: (1) the occupation of home health aide; (2) principles of…

  12. Present status of Japanese Criticality Safety Handbook

    International Nuclear Information System (INIS)

    Okuno, Hiroshi

    1999-01-01

    A draft of the second edition of Nuclear Criticality Safety Handbook has been finalized, and it is under examination by reviewing committee for JAERI Report. Working Group designated for revising the Japanese Criticality Safety Handbook, which is chaired by Prof. Yamane, is now preparing for 'Guide on Burnup Credit for Storage and Transport of Spent Nuclear Fuel' and second edition of 'Data Collection' part of Handbook. Activities related to revising the Handbook might give a hint for a future experiment at STACY. (author)

  13. Awareness and Knowledge of Ergonomics Among Medical ...

    African Journals Online (AJOL)

    with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% ... contribute to achievement of organizational goals.[3] Improving .... poor culture of application of ergonomics by participants as knowledge of benefit of ...

  14. Ergonomics SA publishing requirements and submission guidelines

    African Journals Online (AJOL)

    rhodes

    handling tasks of Indian nurses. Smaranika Goswami. M.Sc. Ergonomics and ... manual patient handling, nurses in India and other developing countries frequently experience awkward postures during work. ..... technique and availability of lifting devices was one of the reasons for WMSDs. Awkward postures were also a ...

  15. Kaizen and ergonomics: the perfect marriage.

    Science.gov (United States)

    Rodriguez, Martin Antonio; Lopez, Luis Fernando

    2012-01-01

    This paper is an approach of how Kaizen (Continuous Improvement) and Ergonomics could be implemented in the field of work. The Toyota's Team Members are the owners of this job, applying tools and techniques to improve work conditions using the Kaizen Philosophy in a QCC Activity (Quality Control Circle).

  16. Awareness and Knowledge of Ergonomics Among Medical ...

    African Journals Online (AJOL)

    Aim: This cross‑sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. Subjects and Methods: A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, ...

  17. Ergonomic aspects of automation in navigation bridges

    NARCIS (Netherlands)

    Lazet, A.; Walraven, P.L.

    1971-01-01

    New ergonomic questions arise from the tendency toward increasing automation in maritime operations. Direct control of engines and rudder from the bridge promises improved ship control, provided that the operator can really exploit the technical improvements. To make such direct control most

  18. Ergonomics SA - Vol 24, No 2 (2012)

    African Journals Online (AJOL)

    Development of a Modular Test Stand for the Measuring of Dynamic Muscular Strain of Test Persons for the Simulation in Digital Human Models · EMAIL FULL TEXT ... Ergonomic intervention for reducing the exposure to musculoskeletal disorders risk factors in pharmaceutical production centre · EMAIL FULL TEXT EMAIL ...

  19. Health Care Ergonomics: Contributions of Thomas Waters.

    Science.gov (United States)

    Poole Wilson, Tiffany; Davis, Kermit G

    2016-08-01

    The aim of this study was to assess the contributions of Thomas Waters's work in the field of health care ergonomics and beyond. Waters's research of safe patient handling with a focus on reducing musculoskeletal disorders (MSDs) in health care workers contributed to current studies and prevention strategies. He worked with several groups to share his research and assist in developing safe patient handling guidelines and curriculum for nursing students and health care workers. The citations of articles that were published by Waters in health care ergonomics were evaluated for quality and themes of conclusions. Quality was assessed using the Mixed Methods Appraisal Tool and centrality to original research rating. Themes were documented by the type of population the citing articles were investigating. In total, 266 articles that referenced the top seven cited articles were evaluated. More than 95% of them were rated either medium or high quality. The important themes of these citing articles were as follows: (a) Safe patient handling is effective in reducing MSDs in health care workers. (b) Shift work has negative impact on nurses. (c) There is no safe way to manually lift a patient. (d) Nurse curriculums should contain safe patient handling. The research of Waters has contributed significantly to the health care ergonomics and beyond. His work, in combination with other pioneers in the field, has generated multiple initiatives, such as a standard safe patient-handling curriculum and safe patient-handling programs. © 2016, Human Factors and Ergonomics Society.

  20. Learning without Pain: Ergonomics Prevents Injuries. Revised

    Science.gov (United States)

    Healthy Schools Network, Inc., 2012

    2012-01-01

    "Ergonomics" is a body of knowledge about human abilities and limitations and how these abilities and limitations should be applied to the design of equipment, machinery, and other devices to ensure safe, comfortable and effective use. Most homes and schools today are equipped with computers for student use. Backpacks have become the…

  1. Ergonomics intervention in manual handling of oxygen

    Directory of Open Access Journals (Sweden)

    M Motamedzadeh

    2013-05-01

    Conclusion: With the implementation of ergonomic intervention is casting unit, the risk of exposure to musculoskeletal disorders caused by manual handling of oxygen cylinders was eliminated and safety of employees against the risk of explosion of the cylinders in comparison with before the intervention was improved.

  2. Ergonomics SA - Vol 21, No 1 (2009)

    African Journals Online (AJOL)

    Ergonomics study on Musculoskeletal Disorders among female agricultural workers of West Bengal, India · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. S Gangopadhyay, B Das, T Das, G Ghoshal, T Ghosh, T Ara, S Dev, 11-22 ...

  3. Ergonomics SA publishing requirements and submission guidelines

    African Journals Online (AJOL)

    rhodes

    researchers take the time to read the work that is coming out of these developing regions to better understand things such as technology transfer and the like. I am increasingly of the opinion that there are a large number of Human Factors and Ergonomics researchers and practitioners who are not fully aware of the work in ...

  4. Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Hashim, Yusof bin [Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang, Gambang 26300 Kuantan, Pahang (Malaysia); Taha, Zahari bin [Faculty of Manufacturing Engineering, Malaysia Pahang, 26600 Pekan, Pahang (Malaysia)

    2015-02-03

    Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger’s injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

  5. Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

    International Nuclear Information System (INIS)

    Hashim, Yusof bin; Taha, Zahari bin

    2015-01-01

    Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger’s injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents

  6. Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

    Science.gov (United States)

    Hashim, Yusof bin; Taha, Zahari bin

    2015-02-01

    Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger's injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

  7. Ergonomia e as atividades ocupacionais da equipe de enfermagem Ergonomics and the occupacional activities of the nursing staff

    Directory of Open Access Journals (Sweden)

    Neusa Maria Costa Alexandre

    1998-04-01

    Full Text Available Esse trabalho discute determinadas condições ergonômicas do trabalho que causam lesões no sistema músculo-esquelético da coluna vertebral, relacionando-as com as atividades ocupacionais da equipe de enfermagem.This paper discusses some of the ergonomics conditions that contribute to the development of musculoskeletal disorders of the vertebral column and relates these conditions to the occupational activities of the nursing staff.

  8. Machine Vision Handbook

    CERN Document Server

    2012-01-01

    The automation of visual inspection is becoming more and more important in modern industry as a consistent, reliable means of judging the quality of raw materials and manufactured goods . The Machine Vision Handbook  equips the reader with the practical details required to engineer integrated mechanical-optical-electronic-software systems. Machine vision is first set in the context of basic information on light, natural vision, colour sensing and optics. The physical apparatus required for mechanized image capture – lenses, cameras, scanners and light sources – are discussed followed by detailed treatment of various image-processing methods including an introduction to the QT image processing system. QT is unique to this book, and provides an example of a practical machine vision system along with extensive libraries of useful commands, functions and images which can be implemented by the reader. The main text of the book is completed by studies of a wide variety of applications of machine vision in insp...

  9. Photovoltaic engineering handbook

    Energy Technology Data Exchange (ETDEWEB)

    Lasnier, F; Ang, T G [Asian Institute of Technolgoy, Bangkok (TH)

    1990-01-01

    The Photovoltaic Engineering Handbook is a comprehensive 'nuts and bolts' guide to photovoltaic technology and systems engineering aimed at engineers and designers in the field. It is the first book to look closely at the practical problems involved in evaluating and setting up a PV power system. The authors' comprehensive insight into the different procedures and decisions that a designer needs to make. The book is unique in its coverage and the technical information is presented in a concise and simple way to enable engineers from a wide range of backgrounds to initiate, assess, analyse and design a PV system. Energy planners making decisions on the most appropriate system for specific needs will also benefit from reading this book. Topics covered include technological processes, including solar cell technology, the photovoltaic generator, photovoltaic systems engineering; characterization and testing methods, sizing procedure; economic analysis and instrumentation. (author).

  10. Handbook on data centers

    CERN Document Server

    Khan, Samee Ullah

    2015-01-01

    This handbook offers a comprehensive review of the state-of-the-art research achievements in the field of data centers. Contributions from international, leading researchers and scholars offer topics in cloud computing, virtualization in data centers, energy efficient data centers, and next generation data center architecture.  It also comprises current research trends in emerging areas, such as data security, data protection management, and network resource management in data centers. Specific attention is devoted to industry needs associated with the challenges faced by data centers, such as various power, cooling, floor space, and associated environmental health and safety issues, while still working to support growth without disrupting quality of service. The contributions cut across various IT data technology domains as a single source to discuss the interdependencies that need to be supported to enable a virtualized, next-generation, energy efficient, economical, and environmentally friendly data cente...

  11. Handbook of supernovae

    CERN Document Server

    Murdin, Paul

    2017-01-01

    This reference work gathers all of the latest research in the supernova field areas to create a definitive source book on supernovae, their remnants and related topics. It includes each distinct subdiscipline, including stellar types, progenitors, stellar evolution, nucleosynthesis of elements, supernova types, neutron stars and pulsars, black holes, swept up interstellar matter, cosmic rays, neutrinos from supernovae, supernova observations in different wavelengths, interstellar molecules and dust. While there is a great deal of primary and specialist literature on supernovae, with a great many scientific groups around the world focusing on the phenomenon and related subdisciplines, nothing else presents an overall survey. This handbook closes that gap at last. As a comprehensive and balanced collection that presents the current state of knowledge in the broad field of supernovae, this is to be used as a basis for further work and study by graduate students, astronomers and astrophysicists working in close/r...

  12. Springer handbook of nanotechnology

    CERN Document Server

    2017-01-01

    This comprehensive handbook has become the definitive reference work in the field of nanoscience and nanotechnology, and this 4th edition incorporates a number of recent new developments. It integrates nanofabrication, nanomaterials, nanodevices, nanomechanics, nanotribology, materials science, and reliability engineering knowledge in just one volume. Furthermore, it discusses various nanostructures; micro/nanofabrication; micro/nanodevices and biomicro/nanodevices, as well as scanning probe microscopy; nanotribology and nanomechanics; molecularly thick films; industrial applications and nanodevice reliability; societal, environmental, health and safety issues; and nanotechnology education. In this new edition, written by an international team of over 140 distinguished experts and put together by an experienced editor with a comprehensive understanding of the field, almost all the chapters are either new or substantially revised and expanded, with new topics of interest added. It is an essential resource for ...

  13. Handbook for Language Detectives

    DEFF Research Database (Denmark)

    Bryanne, Ulla; Bruntt, Karen Scheel Lassen

    Handbook for Language Detectives gives a thorough presentation of English grammar and discusses how to teach grammar. The book unveils to the readers, who will be working as grammar detectives, the fascinating world of language. It does not only deal with "traditional grammar" but also discusses...... what different grammatical structures mean (semantics) and how they influence the level of style (pragmatics). Grammar should not be taught as a separate discipline; it can and should be integrated in communicative language teaching. The book gives you innovative and valuable ideas of how this can...... be done. The book serves a double purpose: - English grammar and language usage at bachelor level from a functional linguistic point of view. - How to teach English grammar within a communicative approach. The book is mainly intended for Danish student teachers of English, but anyone else interested...

  14. Handbook of geomathematics

    CERN Document Server

    Nashed, M; Sonar, Thomas

    2015-01-01

    During the last three decades geosciences and geo-engineering were influenced by two essential scenarios: First, the technological progress has changed completely the observational and measurement techniques. Modern high speed computers and satellite based techniques are entering more and more all geodisciplines. Second, there is a growing public concern about the future of our planet, its climate, its environment and about an expected shortage of natural resources. Obviously, both aspects, viz. efficient strategies of protection against threats of a changing Earth and the exceptional situation of getting terrestrial, airborne as well as space borne data of better and better quality explain the strong need of new mathematical structures, tools and methods. Mathematics concerned with geoscientific problems, i.e., Geomathematics, is becoming increasingly important. The ‘Handbook of Geomathematics’ deals with the qualitative and quantitative properties for the current and possible structures of the system Ea...

  15. Handbook on loss reserving

    CERN Document Server

    Schmidt, Klaus; Schnaus, Anja

    2016-01-01

    This handbook presents the basic aspects of actuarial loss reserving. Besides the traditional methods, it also includes a description of more recent ones and a discussion of certain problems occurring in actuarial practice, like inflation, scarce data, large claims, slow loss development, the use of market statistics, the need for simulation techniques and the task of calculating best estimates and ranges of future losses. In property and casualty insurance the provisions for payment obligations from losses that have occurred but have not yet been settled usually constitute the largest item on the liabilities side of an insurer's balance sheet. For this reason, the determination and evaluation of these loss reserves is of considerable economic importance for every property and casualty insurer. Actuarial students, academics as well as practicing actuaries will benefit from this overview of the most important actuarial methods of loss reserving by developing an understanding of the underlying stochastic models...

  16. Handbook of Intelligent Vehicles

    CERN Document Server

    2012-01-01

    The Handbook of Intelligent Vehicles provides a complete coverage of the fundamentals, new technologies, and sub-areas essential to the development of intelligent vehicles; it also includes advances made to date, challenges, and future trends. Significant strides in the field have been made to date; however, so far there has been no single book or volume which captures these advances in a comprehensive format, addressing all essential components and subspecialties of intelligent vehicles, as this book does. Since the intended users are engineering practitioners, as well as researchers and graduate students, the book chapters do not only cover fundamentals, methods, and algorithms but also include how software/hardware are implemented, and demonstrate the advances along with their present challenges. Research at both component and systems levels are required to advance the functionality of intelligent vehicles. This volume covers both of these aspects in addition to the fundamentals listed above.

  17. Welding processes handbook

    CERN Document Server

    Weman, Klas

    2011-01-01

    Offers an introduction to the range of available welding technologies. This title includes chapters on individual techniques that cover principles, equipment, consumables and key quality issues. It includes material on such topics as the basics of electricity in welding, arc physics, and distortion, and the weldability of particular metals.$bThe first edition of Welding processes handbook established itself as a standard introduction and guide to the main welding technologies and their applications. This new edition has been substantially revised and extended to reflect the latest developments. After an initial introduction, the book first reviews gas welding before discussing the fundamentals of arc welding, including arc physics and power sources. It then discusses the range of arc welding techniques including TIG, plasma, MIG/MAG, MMA and submerged arc welding. Further chapters cover a range of other important welding technologies such as resistance and laser welding, as well as the use of welding techniqu...

  18. The nanobiotechnology handbook

    CERN Document Server

    Xie, Yubing

    2012-01-01

    A thorough overview of nanobiotechnology and its place in advances in applied science and engineering, The Nanobiotechnology Handbook combines contributions from physics, bioorganic and bioinorganic chemistry, molecular and cellular biology, materials science, and medicine as well as from mechanical, electrical, chemical, and biomedical engineering to address the full scope of current and future developments. World-class experts discuss the role of nanobiotechnology in bioanalysis, biomolecular and biomedical nanotechnology, biosensors, biocatalysis and biofuel, and education and workforce development. It includes a companion CD that contains all figures in the book. The book begins with discussions of biomimetic nanotechnology, including a comprehensive overview of DNA nanostructure and DNA-inspired nanotechnology, aptamer-functionalized nanomaterials as artificial antibodies, artificial enzymes, molecular motors, and RNA structures and RNA-inspired nanotechnology. It shows how nanotechnology can be inspired...

  19. Solar cell radiation handbook

    Science.gov (United States)

    Tada, H. Y.; Carter, J. R., Jr.; Anspaugh, B. E.; Downing, R. G.

    1982-01-01

    The handbook to predict the degradation of solar cell electrical performance in any given space radiation environment is presented. Solar cell theory, cell manufacturing and how they are modeled mathematically are described. The interaction of energetic charged particles radiation with solar cells is discussed and the concept of 1 MeV equivalent electron fluence is introduced. The space radiation environment is described and methods of calculating equivalent fluences for the space environment are developed. A computer program was written to perform the equivalent fluence calculations and a FORTRAN listing of the program is included. Data detailing the degradation of solar cell electrical parameters as a function of 1 MeV electron fluence are presented.

  20. Handbook of Memetic Algorithms

    CERN Document Server

    Cotta, Carlos; Moscato, Pablo

    2012-01-01

    Memetic Algorithms (MAs) are computational intelligence structures combining multiple and various operators in order to address optimization problems.  The combination and interaction amongst operators evolves and promotes the diffusion of the most successful units and generates an algorithmic behavior which can handle complex objective functions and hard fitness landscapes.   “Handbook of Memetic Algorithms” organizes, in a structured way, all the the most important results in the field of MAs since their earliest definition until now.  A broad review including various algorithmic solutions as well as successful applications is included in this book. Each class of optimization problems, such as constrained optimization, multi-objective optimization, continuous vs combinatorial problems, uncertainties, are analysed separately and, for each problem,  memetic recipes for tackling the difficulties are given with some successful examples. Although this book contains chapters written by multiple authors, ...

  1. Handbook of radioactivity analysis

    CERN Document Server

    2012-01-01

    The updated and much expanded Third Edition of the "Handbook of Radioactivity Analysis" is an authoritative reference providing the principles, practical techniques, and procedures for the accurate measurement of radioactivity from the very low levels encountered in the environment to higher levels measured in radioisotope research, clinical laboratories, biological sciences, radionuclide standardization, nuclear medicine, nuclear power, fuel cycle facilities and in the implementation of nuclear forensic analysis and nuclear safeguards. The Third Edition contains seven new chapters providing a reference text much broader in scope than the previous Second Edition, and all of the other chapters have been updated and expanded many with new authors. The book describes the basic principles of radiation detection and measurement, the preparation of samples from a wide variety of matrices, assists the investigator or technician in the selection and use of appropriate radiation detectors, and presents state-of-the-ar...

  2. The photomultiplier handbook

    CERN Document Server

    Wright, A G

    2017-01-01

    Photomultipliers are extremely sensitive light detectors that can detect single photons. In multiplying the charge produced by incident light by up to 100 million times, these devices are essential to a wide range of functions, from medical instrumentation to astronomical observations. This complete and authoritative guide will provide students, practitioners, and researchers with a deeper understanding of the operating principles of these devices. Authored by an experienced user and manufacturer of photomultipliers, this handbook gives the reader insights into photomultiplier behaviour as a means to optimize performance. Diffuse and low level light sources are best served with a photomultiplier for the detection of single photon emissions. Light detection and electron multiplication are statistical in nature and the mathematics of these processes is derived from first principles. The book covers other related topics such as scintillation counting, light guides, and large area detectors. The usually complicat...

  3. Handbook of mathematics

    CERN Document Server

    Bronshtein, I N; Musiol, Gerhard; Mühlig, Heiner

    2015-01-01

    This guide book to mathematics contains in handbook form the fundamental working knowledge of mathematics which is needed as an everyday guide for working scientists and engineers, as well as for students. Easy to understand, and convenient to use, this guide book gives concisely the information necessary to evaluate most problems which occur in concrete applications. In the newer editions emphasis was laid on those fields of mathematics that became more important for the formulation and modeling of technical and natural processes, namely Numerical Mathematics, Probability Theory and Statistics, as well as Information Processing. Besides many enhancements and  new paragraphs,  new sections on Geometric and Coordinate Transformations, Quaternions and Applications, and Lie Groups and Lie Algebras were added for the sixth edition.

  4. Handbook of simulation optimization

    CERN Document Server

    Fu, Michael C

    2014-01-01

    The Handbook of Simulation Optimization presents an overview of the state of the art of simulation optimization, providing a survey of the most well-established approaches for optimizing stochastic simulation models and a sampling of recent research advances in theory and methodology. Leading contributors cover such topics as discrete optimization via simulation, ranking and selection, efficient simulation budget allocation, random search methods, response surface methodology, stochastic gradient estimation, stochastic approximation, sample average approximation, stochastic constraints, variance reduction techniques, model-based stochastic search methods and Markov decision processes. This single volume should serve as a reference for those already in the field and as a means for those new to the field for understanding and applying the main approaches. The intended audience includes researchers, practitioners and graduate students in the business/engineering fields of operations research, management science,...

  5. Do occupational demands explain the educational gradient in health?

    NARCIS (Netherlands)

    Meyer, S.C.; Künn-Nelen, A.C.

    2014-01-01

    The aim of this paper is to investigate to what extent occupation-specific demands explain the relationship between education and health. We concentrate on ergonomic, environmental, psychical, social and time demands. Merging the German Microcensus 2009 data with a dataset including detailed

  6. NASA Schedule Management Handbook

    Science.gov (United States)

    2011-01-01

    The purpose of schedule management is to provide the framework for time-phasing, resource planning, coordination, and communicating the necessary tasks within a work effort. The intent is to improve schedule management by providing recommended concepts, processes, and techniques used within the Agency and private industry. The intended function of this handbook is two-fold: first, to provide guidance for meeting the scheduling requirements contained in NPR 7120.5, NASA Space Flight Program and Project Management Requirements, NPR 7120.7, NASA Information Technology and Institutional Infrastructure Program and Project Requirements, NPR 7120.8, NASA Research and Technology Program and Project Management Requirements, and NPD 1000.5, Policy for NASA Acquisition. The second function is to describe the schedule management approach and the recommended best practices for carrying out this project control function. With regards to the above project management requirements documents, it should be noted that those space flight projects previously established and approved under the guidance of prior versions of NPR 7120.5 will continue to comply with those requirements until project completion has been achieved. This handbook will be updated as needed, to enhance efficient and effective schedule management across the Agency. It is acknowledged that most, if not all, external organizations participating in NASA programs/projects will have their own internal schedule management documents. Issues that arise from conflicting schedule guidance will be resolved on a case by case basis as contracts and partnering relationships are established. It is also acknowledged and understood that all projects are not the same and may require different levels of schedule visibility, scrutiny and control. Project type, value, and complexity are factors that typically dictate which schedule management practices should be employed.

  7. 76 FR 60474 - Commercial Item Handbook

    Science.gov (United States)

    2011-09-29

    ... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System Commercial Item Handbook AGENCY.... SUMMARY: DoD has updated its Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business strategies for procuring commercial items. DoD is seeking industry input on...

  8. Integrated Circuit Electromagnetic Immunity Handbook

    Science.gov (United States)

    Sketoe, J. G.

    2000-08-01

    This handbook presents the results of the Boeing Company effort for NASA under contract NAS8-98217. Immunity level data for certain integrated circuit parts are discussed herein, along with analytical techniques for applying the data to electronics systems. This handbook is built heavily on the one produced in the seventies by McDonnell Douglas Astronautics Company (MDAC, MDC Report E1929 of 1 August 1978, entitled Integrated Circuit Electromagnetic Susceptibility Handbook, known commonly as the ICES Handbook, which has served countless systems designers for over 20 years). Sections 2 and 3 supplement the device susceptibility data presented in section 4 by presenting information on related material required to use the IC susceptibility information. Section 2 concerns itself with electromagnetic susceptibility analysis and serves as a guide in using the information contained in the rest of the handbook. A suggested system hardening requirements is presented in this chapter. Section 3 briefly discusses coupling and shielding considerations. For conservatism and simplicity, a worst case approach is advocated to determine the maximum amount of RF power picked up from a given field. This handbook expands the scope of the immunity data in this Handbook is to of 10 MHz to 10 GHz. However, the analytical techniques provided are applicable to much higher frequencies as well. It is expected however, that the upper frequency limit of concern is near 10 GHz. This is due to two factors; the pickup of microwave energy on system cables and wiring falls off as the square of the wavelength, and component response falls off at a rapid rate due to the effects of parasitic shunt paths for the RF energy. It should be noted also that the pickup on wires and cables does not approach infinity as the frequency decreases (as would be expected by extrapolating the square law dependence of the high frequency roll-off to lower frequencies) but levels off due to mismatch effects.

  9. Ergonomics in the operating room: protecting the surgeon.

    Science.gov (United States)

    Rosenblatt, Peter L; McKinney, Jessica; Adams, Sonia R

    2013-01-01

    To review elements of an ergonomic operating room environment and describe common ergonomic errors in surgeon posture during laparoscopic and robotic surgery. Descriptive video based on clinical experience and a review of the literature (Canadian Task Force classification III). Community teaching hospital affiliated with a major teaching hospital. Gynecologic surgeons. Demonstration of surgical ergonomic principles and common errors in surgical ergonomics by a physical therapist and surgeon. The physical nature of surgery necessitates awareness of ergonomic principles. The literature has identified ergonomic awareness to be grossly lacking among practicing surgeons, and video has not been documented as a teaching tool for this population. Taking this into account, we created a video that demonstrates proper positioning of monitors and equipment, and incorrect and correct ergonomic positions during surgery. Also presented are 3 common ergonomic errors in surgeon posture: forward head position, improper shoulder elevation, and pelvic girdle asymmetry. Postural reset and motion strategies are demonstrated to help the surgeon learn techniques to counterbalance the sustained and awkward positions common during surgery that lead to muscle fatigue, pain, and degenerative changes. Correct ergonomics is a learned and practiced behavior. We believe that video is a useful way to facilitate improvement in ergonomic behaviors. We suggest that consideration of operating room setup, proper posture, and practice of postural resets are necessary components for a longer, healthier, and pain-free surgical career. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

  10. A multimedia case based approach to the study of office ergonomics.

    Science.gov (United States)

    August-Dalfen, Sharon; Snider, Laurie

    2003-01-01

    Multimedia technology has the capacity to provide students with an interactive approach to problem based learning and to bridge the gap between theoretical knowledge and clinical practice. The present paper describes the design and development of the program ErgoROM, a CD which presents a case study to assist occupational therapy students in their studies of office ergonomics. A pilot study showed that overall, 91% of respondents rated the ErgoROM as either "Excellent" or "Very Good". Additionally they reported that ErgoROM had a positive impact on active learning and critical thinking.

  11. Ergonomics intervention to reduce musculoskeletal disorders: case study in cement company production

    Directory of Open Access Journals (Sweden)

    Abbas Moradi

    2016-09-01

    Full Text Available Introduction:Musculoskeletal Disorders (MSDs are one of the most important factors occupational injuries and disabilities in workplaces. The aim of the persent study was ergonomics intervention to reducemusculoskeletal disorders. Methods: This interventional study was conduct on 126 preservation and maintenance  workers in cement company by classfication sampling. The Nordic Musculoskeletal Disorders Questionnaire, QEC and Ergonomics Checkpoint methods were used to collected data before and after the interventions. The interventional program include practical and easy to implment solutions for improvement safety,health and work conditions, workers trainig, selective and corrective exer Data  were analyzed by Mcnemar test using SPSS_22 software. Result: Data analysis showed  significant differences(P_value<0.001 between prevalnce of disorders during one week before interventions.  for lower back,back and were 62.70%, 60.32% and after intervention were reduce  to 46.03% and 43.65%. Conclusion: Acoording  to QEC method, 83 maintenance  workers ( 65.87% were at high risk  and prevalence  of lower back and knee was high that applying of  simple  and inexpensive solutions, participatory solutions of Ergonomics Checkpoint andselective corrective exerciselead to  musculoskeletal disorders reduction.

  12. Ergonomic analysis of construction worker's body postures using wearable mobile sensors.

    Science.gov (United States)

    Nath, Nipun D; Akhavian, Reza; Behzadan, Amir H

    2017-07-01

    Construction jobs are more labor-intensive compared to other industries. As such, construction workers are often required to exceed their natural physical capability to cope with the increasing complexity and challenges in this industry. Over long periods of time, this sustained physical labor causes bodily injuries to the workers which in turn, conveys huge losses to the industry in terms of money, time, and productivity. Various safety and health organizations have established rules and regulations that limit the amount and intensity of workers' physical movements to mitigate work-related bodily injuries. A precursor to enforcing and implementing such regulations and improving the ergonomics conditions on the jobsite is to identify physical risks associated with a particular task. Manually assessing a field activity to identify the ergonomic risks is not trivial and often requires extra effort which may render it to be challenging if not impossible. In this paper, a low-cost ubiquitous approach is presented and validated which deploys built-in smartphone sensors to unobtrusively monitor workers' bodily postures and autonomously identify potential work-related ergonomic risks. Results indicates that measurements of trunk and shoulder flexions of a worker by smartphone sensory data are very close to corresponding measurements by observation. The proposed method is applicable for workers in various occupations who are exposed to WMSDs due to awkward postures. Examples include, but are not limited to industry laborers, carpenters, welders, farmers, health assistants, teachers, and office workers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Gen IV Materials Handbook Functionalities and Operation

    International Nuclear Information System (INIS)

    Ren, Weiju

    2009-01-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  14. Gen IV Materials Handbook Functionalities and Operation

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2009-12-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  15. EURANOS. The Handbook Users Group (HUG)

    DEFF Research Database (Denmark)

    Nisbet, A.F.; Andersson, Kasper Grann; Carlé, B.

    Three handbooks to assist in the management of contaminated food production systems, inhabited areas and drinking water supplies have been developed in conjunction with a wide range of stakeholders in Europe. These handbooks are living documents that will require updating from time to time.......eu-neris.net) to facilitate information exchange. Emergency centres in Member States not involved in the development of the handbooks were invited to take part in demonstration activities to establish whether the handbooks were useful for the purposes of contingency planning and accident management. Results from...... to remain state-of-the-art. To address this need, a handbook users’ group (HUG) was established in 2007 to provide a platform for maintaining the handbooks and to build a network of users for both the generic handbooks and any subsequently customised versions. A web site was set up (www...

  16. Welding engineering handbook. Volume 1

    International Nuclear Information System (INIS)

    Sundarrajan, S.; Bhaskar, S.V.; Amarnath Kumar, G.C.

    1992-11-01

    In this Welding Engineering Handbook, we have brought key application areas of welding which are of technocommercial importance. These details are not normally available. Each author, highly specialized in these areas has spent considerable amount of time and covered the topic exhaustively giving valuable details. Each application area has different quality requirements which are brought out clearly. This handbook is designed to cater the information source for various professionals in core sector industries like fabrication, shipbuilding, automobiles, nuclear plants, machine building, fertilisers and chemical industry, pressure vessel manufactures etc. We are sure that this handbook will serve as a reference reckoner to all plant/works managers, maintenance, projects, engineers, R and D and students. (original)

  17. Handbook of smoke control engineering

    CERN Document Server

    Klote, John H; Turnbull, Paul G; Kashef, Ahmed; Ferreira, Michael J

    2012-01-01

    The Handbook of Smoke Control Engineering extends the tradition of the comprehensive treatment of smoke control technology, including fundamental concepts, smoke control systems, and methods of analysis. The handbook provides information needed for the analysis of design fires, including considerations of sprinklers, shielded fires, and transient fuels. It is also extremely useful for practicing engineers, architects, code officials, researchers, and students. Following the success of Principles of Smoke Management in 2002, this new book incorporates the latest research and advances in smoke control practice. New topics in the handbook are: controls, fire and smoke control in transport tunnels, and full-scale fire testing. For those getting started with the computer models CONTAM and CFAST, there are simplified instructions with examples. This is the first smoke control book with climatic data so that users will have easy-to-use weather data specifically for smoke control design for locations in the U.S., Can...

  18. Handbook of relativistic quantum chemistry

    International Nuclear Information System (INIS)

    Liu, Wenjian

    2017-01-01

    This handbook focuses on the foundations of relativistic quantum mechanics and addresses a number of fundamental issues never covered before in a book. For instance: How can many-body theory be combined with quantum electrodynamics? How can quantum electrodynamics be interfaced with relativistic quantum chemistry? What is the most appropriate relativistic many-electron Hamiltonian? How can we achieve relativistic explicit correlation? How can we formulate relativistic properties? - just to name a few. Since relativistic quantum chemistry is an integral component of computational chemistry, this handbook also supplements the ''Handbook of Computational Chemistry''. Generally speaking, it aims to establish the 'big picture' of relativistic molecular quantum mechanics as the union of quantum electrodynamics and relativistic quantum chemistry. Accordingly, it provides an accessible introduction for readers new to the field, presents advanced methodologies for experts, and discusses possible future perspectives, helping readers understand when/how to apply/develop the methodologies.

  19. Handbook of relativistic quantum chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Wenjian (ed.) [Peking Univ., Beijing (China). Center for Computational Science and Engineering

    2017-03-01

    This handbook focuses on the foundations of relativistic quantum mechanics and addresses a number of fundamental issues never covered before in a book. For instance: How can many-body theory be combined with quantum electrodynamics? How can quantum electrodynamics be interfaced with relativistic quantum chemistry? What is the most appropriate relativistic many-electron Hamiltonian? How can we achieve relativistic explicit correlation? How can we formulate relativistic properties? - just to name a few. Since relativistic quantum chemistry is an integral component of computational chemistry, this handbook also supplements the ''Handbook of Computational Chemistry''. Generally speaking, it aims to establish the 'big picture' of relativistic molecular quantum mechanics as the union of quantum electrodynamics and relativistic quantum chemistry. Accordingly, it provides an accessible introduction for readers new to the field, presents advanced methodologies for experts, and discusses possible future perspectives, helping readers understand when/how to apply/develop the methodologies.

  20. Effect of working characteristics and taught ergonomics on the prevalence of musculoskeletal disorders amongst dental students

    Science.gov (United States)

    2013-01-01

    Background Work-related musculoskeletal disorders are one of the main occupational health hazards affecting dental practitioners. This study was conducted to assess the prevalence of Work-related Musculoskeletal Disorder (WMSD) amongst dental students. Possible correlations with the working environment and ergonomics taught in Malaysian dental schools were also sought. Methods Five dental schools in Malaysia participated in this cross-sectional study. A validated self-administered questionnaire was used to establish the point prevalence of WMSD in the dental students based on various body regions. The questionnaire also collected data regarding the working environment, clinical practice and the taught ergonomics of the students during their training years. Results Out of five hundred and sixty eight dental students who participated in the study, 410 were in their clinical years whilst 158 were students in their non- clinical years. Ninety three percent of the clinical year students reported symptoms of WMSD in one or more body regions. Female students reported a significantly higher numbers of symptoms compared to male students. The neck (82%) and lower back (64%) were reported to have the highest prevalence of WMSD. Discomfort in the neck region was found to be associated with self-reported frequency of bending of the neck. A majority of students (92%) reported minimum participation in workshops related to ergonomics in dentistry and 77% were unfamiliar with treatment and remedies available in the case of WMSD. Conclusions There was more WMSD seen in dental students who had started their clinical years. Neck and lower back are more injury prone areas and are at increased risk of developing musculoskeletal disorders. Theory and practice of ergonomics should be incorporated into the dental undergraduate curriculum. PMID:23547959

  1. Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

    Science.gov (United States)

    Emmons, Mark; Wilkinson, Frances C.

    2001-01-01

    Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

  2. Ergonomics, automation and logistics: practical and effective combination of working methods, a case study of a baking company.

    Science.gov (United States)

    Quintana, Leonardo; Arias, Claudia; Cordoba, Jorge; Moroy, Magda; Pulido, Jean; Ramirez, Angela

    2012-01-01

    The aim of this study was to combine three different analytical methods from three different disciplines to diagnose the ergonomic conditions, manufacturing and supply chain operation of a baking company. The study explores a summary of comprehensive working methods that combines the ergonomics, automation and logistics study methods in the diagnosis of working conditions and productivity. The participatory approach of this type of study that involves the feelings and first-hand knowledge of workers of the operation are determining factors in defining points of action and ergonomic interventions, as well as defining opportunities in the automation of manufacturing and logistics, to cope with the needs of the company. The study identified an ergonomic situation (high prevalence of wrist-hand pain), and the combination of interdisciplinary techniques applied allowed to improve this condition in the company. This type of study allows a primary basis of the opportunities presented by the combination of specialized methods of different disciplines, for the definition of comprehensive action plans for the company. Additionally, it outlines opportunities for improvement and recommendations to mitigate the burden associated with occupational diseases and as an end result improve the quality of life and productivity of workers.

  3. The concept of contradiction in ergonomics practice.

    Science.gov (United States)

    Nathanael, Dimitris; Zarboutis, Nikos; Marmaras, Nicolas

    2012-01-01

    The present communication deals with the methodology of the ergonomics field intervention process. It proposes an operationalized version of work analysis in terms of contradictions. The aim is to demonstrate that such a dialectic tool and method of representation may assist the ergonomist to frame the essence of a work activity in practical terms, swiftly and in a manner that preserves its multifaceted unity. The proposed method is inspired by two theoretical constructs (i) contradiction as used in Cultural Historical Activity Theory and (ii) regulation, as developed and used by the francophone tradition of ergonomics of activity. Two brief examples of its use are presented and a discussion is made on further developments and possible pitfalls.

  4. Introduction to ergonomics for healthcare workers.

    Science.gov (United States)

    Waters, Thomas R

    2010-01-01

    Healthcare workers who handle and move patients as part of their jobs suffer a disproportionately high number of work-related musculoskeletal disorders (MSDs). The majority of reported work-related MSDs are back pain cases that result in significant numbers of lost work days. It is likely that these lost workdays have a substantial impact on the quality and cost of health care. Patient care ergonomics can reduce the risk of work-related MSDs by helping safety experts design the work so it can be safely performed by most workers. This article provides a general overview of ergonomics--what it is, how it can be used to help design safe work, and why all healthcare workers and administrators should know and understand how excessive work demands can lead to increased risk of work-related MSDs. The article will also explain technological solutions that can be implemented to reduce the risk of work-related MSDs for healthcare workers.

  5. Ergonomics influence on control room layout

    International Nuclear Information System (INIS)

    Hartfiel, H.D.

    1984-01-01

    Nowadays, human factors has become an important aspect of the design of work places. Since the control room in a nuclear power plant is a work place, too, its layout is also influenced by ergonomics. With the KWU control room concept for the 1300 MW PWR as an example, we show how assured and applicable ergonomic findings enter into the control room design. On the basis of general design principles for work places, specific methods for control room planning have been developed. By working with these methods a concept that makes it possible to build a man-machine interface able to fulfill the process control tasks with all their underlying conditions has been derived. (author)

  6. Casting an ergonomic eye on university libraries.

    Science.gov (United States)

    Ferrer, Nicole; Villarouco, Vilma

    2012-01-01

    Research in the field of Ergonomics of the Built Environment has been developed with a view to consolidating studies in this area, the objective of which is to provide evidence that the joint participation of users and designers on drawing up projects is important. In this context, the theme of this study is to investigate the interactions between users and the environment in a university library. To do so, well-established techniques from Ergonomics, Architecture and Environmental Psychology were used to make a functional and behavioral evaluation to identify the level of user satisfaction in six libraries in the various study centers of the Federal University of Pernambuco in Recife, northeast Brazil, so as to identify the strengths and also weaknesses in these spatial structures.

  7. A brief essay on ergonomics in graphic design.

    Science.gov (United States)

    Mendonça, André N F; van der Linden, Júlio C S; Fonseca, Tania M G

    2012-01-01

    Through Brazilian publication revision on the relations amongst Ergonomics and Design, we observed the tendency towards an approach focusing on product design. However, it is our duty to question which would be the influences of ergonomics in the graphic design. As a methodology, we considered the identification that the practices derived from ergonomics as epistemic system found in the main bibliography related to graphic design.

  8. Ergonomics Integration Omproving Production Process Management in Enterprises of Latvia

    OpenAIRE

    Henrijs Kaļķis

    2013-01-01

    Dotoral thesis ERGONOMICS INTEGRATION IMPROVING PRODUCTION PROCESS MANAGEMENT IN ENTERPRISES OF LATVIA ANNOTATION Ergonomics integration in process management has great significance in organisations` growth of productivity. It is a new approach to entrepreneurship and business strategy, where ergonomic aspects and values are taken into account in ensuring the effective process management and profitability of enterprises. This study is aimed at solution of the problem of e...

  9. Ergonomics: A bridge between fundamentals and applied research

    OpenAIRE

    Ghosh, Subrata; Bagchi, Anandi; Sen, Devashish; Bandyopadhyay, Pathikrit

    2011-01-01

    Ergonomics is becoming a subject of applying fundamentals on anthropocentric dimensions for holistic welfare. The so-called conflict between Basic science and Applied research finds one of its edges in Ergonomics. Be it cutting-edge technology or frontiers of scientific innovation-all start from understanding basic scientific aptitude and skill, and the best way to get familiar with the situation is practicing basic science again and again at a regular basis. Ergonomics is diversified in such...

  10. Bad Enough Ergonomics: A Case Study of an Office Chair

    OpenAIRE

    Peteri, Virve

    2017-01-01

    The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufactu...

  11. Handbook of Visual Display Technology

    CERN Document Server

    Cranton, Wayne; Fihn, Mark

    2012-01-01

    The Handbook of Visual Display Technology is a unique work offering a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. An invaluable compilation of information, the Handbook will serve as a single reference source with expert contributions from over 150 international display professionals and academic researchers. All classes of display device are covered including LCDs, reflective displays, flexible solutions and emissive devices such as OLEDs and plasma displays, with discussion of established principles, emergent technologies, and particular areas of application. The wide-ranging content also encompasses the fundamental science of light and vision, image manipulation, core materials and processing techniques, display driving and metrology.

  12. Handbook of thin film technology

    CERN Document Server

    Frey, Hartmut

    2015-01-01

    Handbook of Thin Film Technology” covers all aspects of coatings preparation, characterization and applications. Different deposition techniques based on vacuum and plasma processes are presented. Methods of surface and thin film analysis including coating thickness, structural, optical, electrical, mechanical and magnetic properties of films are detailed described. The several applications of thin coatings and a special chapter focusing on nanoparticle-based films can be found in this handbook. A complete reference for students and professionals interested in the science and technology of thin films.

  13. Handbook of mechanical engineering terms

    CERN Document Server

    Ramalingam, KK

    2009-01-01

    About the Book: The Handbook of Mechanical Engineering terms contains short, precise definitions of about four thousand terms. These terms have been collected from different sources, edited and grouped under twenty six parts and given alphabetically under each part for easy reference. The book will be a source of guidance and help to the students, staff and practising engineers in understanding and updating the subject matter. Contents: The Handbook of Mechanical Engineering terms contains short, precise definitions of about four thousand terms. These terms have been collected from differ

  14. Global drivers, sustainable manufacturing and systems ergonomics.

    Science.gov (United States)

    Siemieniuch, C E; Sinclair, M A; Henshaw, M J deC

    2015-11-01

    This paper briefly explores the expected impact of the 'Global Drivers' (such as population demographics, food security; energy security; community security and safety), and the role of sustainability engineering in mitigating the potential effects of these Global Drivers. The message of the paper is that sustainability requires a significant input from Ergonomics/Human Factors, but the profession needs some expansion in its thinking in order to make this contribution. Creating a future sustainable world in which people experience an acceptable way of life will not happen without a large input from manufacturing industry into all the Global Drivers, both in delivering products that meet sustainability criteria (such as durability, reliability, minimised material requirement and low energy consumption), and in developing sustainable processes to deliver products for sustainability (such as minimum waste, minimum emissions and low energy consumption). Appropriate changes are already being implemented in manufacturing industry, including new business models, new jobs and new skills. Considerable high-level planning around the world is in progress and is bringing about these changes; for example, there is the US 'Advanced Manufacturing National Program' (AMNP)', the German 'Industrie 4.0' plan, the French plan 'la nouvelle France industrielle' and the UK Foresight publications on the 'Future of Manufacturing'. All of these activities recognise the central part that humans will continue to play in the new manufacturing paradigms; however, they do not discuss many of the issues that systems ergonomics professionals acknowledge. This paper discusses a number of these issues, highlighting the need for some new thinking and knowledge capture by systems ergonomics professionals. Among these are ethical issues, job content and skills issues. Towards the end, there is a summary of knowledge extensions considered necessary in order that systems ergonomists can be fully

  15. International Ergonomics Association Activities and Constituent Societies

    Science.gov (United States)

    1988-05-01

    of Psychology: Ergonomics Section J. Mallart Instituto Nacional de Psicologia , Aplicada y Psiotechnia Juan Huarte de San Juan Ciudad Universitaria...Israel ITALY Bagnara, Sebastino CNR Instituto Di Psicologia via Dei Monti Tiburtini 509 00517 Roma Italy Buti, Luigi Bandini SEA via Valtorta 21 20127...Francesco Olivetti Centro di Psicologia via Jervis 77 Ivrea Italy Ruggeri, Remigio Politecnico, Dip. di Meccanica, sez Ergotecnica Ind. Piazza L de

  16. Ergonomics, design and reliability of body armour

    OpenAIRE

    Watson, Celia H.

    2011-01-01

    The wearing of body amour has become a necessity for many professions and much work has gone into the optimisation of the mechanics of protection. In the present study a broader view of the effects of ergonomics, design, reliability and protection has been taken. Three background topics are examined by reference to the literature. First, as an example of the threats and injury mechanisms that prevail in modern conflicts, the effects of blast injury to the head are investigat...

  17. Ergonomics: an aid to system design

    International Nuclear Information System (INIS)

    McCafferty, D.B.

    1990-01-01

    In recent years, the engineering community has recognized that ergonomics can make significant contributions to system design. Working together engineers and ergonomists can create designs that effectively meet system goals. By considering the role of humans and technology in the context of systems and by reducing the potential for errors, gains can be made in overall system reliability. Such efforts can reduce the need for costly backfits and increase system efficiency. (author)

  18. Phase change materials handbook

    Science.gov (United States)

    Hale, D. V.; Hoover, M. J.; Oneill, M. J.

    1971-01-01

    This handbook is intended to provide theory and data needed by the thermal design engineer to bridge the gap between research achievements and actual flight systems, within the limits of the current state of the art of phase change materials (PCM) technology. The relationship between PCM and more conventional thermal control techniques is described and numerous space and terrestrial applications of PCM are discussed. Material properties of the most promising PCMs are provided; the purposes and use of metallic filler materials in PCM composites are presented; and material compatibility considerations relevant to PCM design are included. The engineering considerations of PCM design are described, especially those pertaining to the thermodynamic and heat transfer phenomena peculiar to PCM design. Methods of obtaining data not currently available are presented. The special problems encountered in the space environment are described. Computational tools useful to the designer are discussed. In summary, each aspect of the PCM problem important to the design engineer is covered to the extent allowed by the scope of this effort and the state of the art.

  19. Impact Disdrometers Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomew, Mary Jane [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-03-01

    To improve the quantitative description of precipitation processes in climate models, the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) Climate Research Facility has been collecting observations of the drop size spectra of rain events since early in 2006. Impact disdrometers were the initial choice due to their reliability, ease of maintenance, and relatively low cost. Each of the two units deployed was accompanied by a nearby tipping bucket. In 2010, the tipping buckets were replaced by weighing buckets rain gauges. Five video disdrometers were subsequently purchased and are described in ARM’s VDIS Handbook.1 As of April 2011, three of the weighing bucket instruments were deployed, one was to travel with the second ARM Mobile Facility, and the fifth was a spare. Two of the video disdrometers were deployed, a third was to be deployed later in the spring of 2011, one was to travel with the second ARM Mobile Facility, and the last was a spare. Detailed descriptions of impact disdrometers and their datastreams are provided in this document.

  20. Welding processes handbook

    CERN Document Server

    Weman, Klas

    2003-01-01

    Deals with the main commercially significant and commonly used welding processes. This title takes the student or novice welder through the individual steps involved in each process in an easily understood way. It covers many of the requirements referred to in European Standards including EN719, EN 729, EN 729 and EN 287.$bWelding processes handbook is a concise, explanatory guide to the main commercially significant and commonly-used welding processes. It takes the novice welder or student through the individual steps involved in each process in a clear and easily understood way. It is intended to provide an up-to-date reference to the major applications of welding as they are used in industry. The contents have been arranged so that it can be used as a textbook for European welding courses in accordance with guidelines from the European Welding Federation. Welding processes and equipment necessary for each process are described so that they can be applied to all instruction levels required by the EWF and th...

  1. THE AIDS HANDBOOK

    Directory of Open Access Journals (Sweden)

    Z Khan

    1997-12-01

    Full Text Available HIV infection and AIDS is increasingly becoming a major public health problem in our country. Currently, the reported cases represent only the 'tip of the iceberg' of the problem. In view of the fact that no cure or vaccine for the disease has yet been found, spreading knowledge and removing misconceptions is about the only way that AIDS can be effectively tackled.This handbook, developed by Prof. Shankar Chowdhury and associates, seeks to address all levels of medical and non-medical AIDS workers, as well as the layman. It deals with topics ranging from biology of the virus, symptoms and transmission of disease, to prevention, counselling for infected persons and action plan for AIDS education.The biology of the virus and the immune system is described in simple terms, as well as methods of testing for HIV, and what these test results mean. The progression of disease in adults and children, development of symptoms, diagnostic criteria for AIDS, treatment and outcome of disease is dealt with. How AIDS spreads between people, and the health risk for health workers and families is examined. The various ways in which transmission of HIV can be prevented is looked at in detail, including public health measures, national and internatonal action, and ethical and human rights issues involved.

  2. TRISTAN: a handbook

    International Nuclear Information System (INIS)

    1984-07-01

    TRISTAN is an on-line isotope separator located at the Brookhaven National Laboratory High Flux Beam Reactor (HFBR). Its primary purpose is the study of neutron-rich nuclei far from stability. It is intended principally as a USER facility. Construction, maintenance and improvement of the facility constitute one of the activities of the Neutron Nuclear Group at BNL and are carried out with the advice and help of the TRISTAN user community. The other activities of the BNL group include an extensive program of studies with the (n, γ) reaction, utilizing thermal and resonance energy neutrons, and a related supporting effort in theoretical interpretation of the data from both (n, γ) and TRISTAN studies. The purpose of this Handbook is to acquaint the community with the capabilities of TRISTAN. We hope it will be of use to frequent users as an update on new developments and to potential new users in giving a feeling for the types of experiments that can be carried out and the ranges of nuclei that can be studied. It is written in an operational sense: that is, technical details are kept to a minimum. The purpose of each section is to provide background information and sufficient description such that potential users can judge, or begin to assess, whether their own research interests can be satisfied by working at TRISTAN

  3. Practical use of ergonomics in industrial processes

    International Nuclear Information System (INIS)

    1976-01-01

    Six lectures deal with new developments in the application of ergonomic knowledge, in particular to nuclear technology. All contributions have in common the aspects of analysis and structure of man-machine-systems in which human operators have to process information and have to make decisions. Quoting a lot of examples from a variety of industrial sectors, the article discusses complexes of problems and ways of solving them concerning questions requiring the answer 'yes' or 'no', concerning the dialogue man-computer, the organization of central control mechanisms, the avoidance of human errors, influence of man on system safety, and the rational incorporation of ergonomics in system planning. This publication is meant to be a contribution to extend the knowledge on the organization of work from an ergonomic and engineer/psychological point of view. It is to show how the knowledge of the nature of man can be applied as a systems component in order to make industrial processes safer and more economical, and to entrust man with purposeful and satisfying tasks. (orig./LN) [de

  4. The dentist's operating posture - ergonomic aspects.

    Science.gov (United States)

    Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

    2014-06-15

    The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist's physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture.

  5. Ergonomic Conditions in Small Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Ashraf A. Shikdar

    2001-12-01

    Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

  6. How can ergonomic practitioners learn to practice a macro-ergonomic framework developed in academia?

    DEFF Research Database (Denmark)

    Broberg, Ole; Seim, Rikke; Andersen, Vibeke

    2009-01-01

    How can a macro-ergonomic framework developed in academia be “transferred” to ergonomic practitioners and become a new work practice? The purpose of this paper is to reflect upon experiences from an interactive research program in which this transferral was tested by two consecutive approaches......” with the researchers and other practitioners; 3) paying attention to the organizational settings of the ergonomic practitioner to make sure that a new work practice is implemented in the organization and not only by a single practitioner....... and interpretation of results when applying the new concept to a real case in a company; 2) the concept is introduced to practitioners, after which they try to practice the concept in a normal consultancy situation, and afterwards have the opportunity to reflect upon their experiences in a “learning space...

  7. Strategies and arguments of ergonomic design for sustainability.

    Science.gov (United States)

    Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

    2012-01-01

    Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

  8. Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

    Science.gov (United States)

    Helali, Faramarz

    2009-01-01

    To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

  9. Preventive strength training improves working ergonomics during welding.

    Science.gov (United States)

    Krüger, Karsten; Petermann, Carmen; Pilat, Christian; Schubert, Emil; Pons-Kühnemann, Jörn; Mooren, Frank C

    2015-01-01

    To investigate the effect of a preventive strength training program on cardiovascular, metabolic and muscular strains during welding. Welders are one of the occupation groups which typically have to work in extended forced postures which are known to be an important reason for musculoskeletal disorders. Subjects (exercise group) accomplished a 12-week strength training program, while another group served as controls (control group). Pre and post training examinations included the measurements of the one repetition maximum and an experimental welding test. Local muscle activities were analysed by surface electromyography. Furthermore, heart rate, blood pressure, lactate and rating of perceived exertion were examined. In the exercise group, strength training lead to a significant increase of one repetition maximum in all examined muscles (pwelding test muscle activities of trunk and shoulder muscles and arm muscles were significantly reduced in the exercise group after intervention (pwelding (p<.05). Effects of strength training can be translated in an improved working ergonomics and tolerance against the exposure to high physical demands at work.

  10. Ergonomics aspects of tree-planting using 'multipot' technology.

    Science.gov (United States)

    Giguère, D; Bélanger, R; Gauthier, J M; Larue, C

    1993-08-01

    The highlights of a descriptive study on the ergonomics and occupational health and safety aspects of tree-planting in Québec are presented. The study was planned to consider the most representative geographical sites, planting technologies, and planting organizations. Semi-directed interviews were made with a mixed group of 48 male and female tree-planters and physiological measurements were made on four male planters. Tools and other equipment were also examined. An analysis of the work identified the main elements of the planting cycle, and the high cardiac rate in the working planters was related more to his manual transportation of seedlings and travel on rough paths than to planting per se. A tree-planter will typically travel 2.4 km carrying 16.8 kg of material and equipment in order to plant an average of 1245 seedlings daily. One out of two interviewed planters reported having a work-related accident or incident during his or her lifetime planting career. The body parts reported most frequently injured were the lower extremities (knee, foot, ankle), the skin, the eyes, and the wrist. Recommendations on the development of appropriate tools and footwear for tree-planters and for further research on repetitive strain injury induced by tree-planting have been made.

  11. Determinants of business sustainability: an ergonomics perspective.

    Science.gov (United States)

    Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

    2009-03-01

    There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human

  12. Occupant comfort and health in green and conventional university buildings.

    Science.gov (United States)

    Hedge, A; Miller, L; Dorsey, J A

    2014-01-01

    Green building standards are significantly impacting modern construction practices. The resulting structures are more energy efficient, but their impact on occupant health has not been widely studied. To investigate a range of indoor environment and ergonomic issues in green buildings. Retrospective post-occupancy evaluation survey of 319 occupants in two Leadership in Energy and Environmental Design (LEED) certified buildings and one conventional building on a Canadian University campus. Results show that working in the LEED buildings was a generally positive experience for their health, performance, and satisfaction. However, the LEED buildings did not always receive the highest ratings for environmental conditions or for health and productivity. Respondents indicated a range of concerns with thermal conditions, office lighting, noise and their overall workstation designs and these were not always better in the green buildings. These results highlight the need for better integration of ergonomic design into green buildings and into the LEED rating system, and these implications are discussed.

  13. Ergonomic relationship during work in nursing staff of intensive care unit with operating room

    Directory of Open Access Journals (Sweden)

    Yousef Mahmoudifar

    2017-01-01

    Full Text Available Background and Objectives: High prevalence of work-related musculoskeletal disorders, especially in jobs such as nursing which covers tasks like patients' repositioning, has attracted great attentions from occupational healthcare experts to necessitate the knowledge of ergonomic science. Therefore, this study was performed aiming at ergonomic relationship during work in nursing staff of Intensive Care Unit (ICU with operating room. Materials and Methods: In this descriptive-analytical study (cohort, fifty personnel of ICU staff and fifty of operating room staff were selected through a census method and were assessed using tools such as Nordic questionnaire and Rapid Entire Body Assessment (REBA standards in terms of body posture ergonomics. The obtained data were analyzed by SPSS software and Chi-Square test after collection. Results: The most complaints were from the operating room group (68% and ICU staff (60% for the lumbar musculoskeletal system. There was a significant relationship between the total REBA scores of body, legs, neck, arm, force status, load fitting with hands and static or dynamic activities in the operating room and ICU staff groups (P < 0.05. In operating room and ICU groups, most subjects obtained score 11–15 and very high-risk level. Conclusion: Nurses working at operating room and ICU ward are subjected to high-risk levels and occupational injuries which is dramatically resulted from inappropriate body posture or particular conditions of their works. As a result, taking corrective actions along with planning and identifying ways will help prohibiting the prevalence of disorders in the future.

  14. Carpal tunnel syndrome among laboratory technicians in relation to personal and ergonomic factors at work.

    Science.gov (United States)

    El-Helaly, Mohamed; Balkhy, Hanan H; Vallenius, Laura

    2017-11-25

    Work-related carpal tunnel syndrome (CTS) has been reported in different occupations, including laboratory technicians, so this study was carried out to determine the prevalence and the associated personal and ergonomic factors for CTS among laboratory technicians. A cross-sectional study was conducted among 279 laboratory technicians at King Fahd Hospital, Saudi Arabia, who filled in a self-administered questionnaire, including questions regarding their demographic criteria, occupational history, job tasks, workplace tools, ergonomic factors at work, and symptoms suggestive of CTS. Physical examinations and electrodiagnostic studies were carried out for those who had symptoms suggestive of CTS to confirm the diagnosis. Univariate and multivariate analysis were performed for both personal and physical factors in association with confirmed CTS among laboratory technicians. The prevalence of CTS among the laboratory technicians was 9.7% (27/279). The following were the statistically significant risk factors for CTS among them: gender (all cases of CTS were female, P=0.00), arm/hand exertion (OR: 7.96; 95% CI: 1.84-34.33), pipetting (OR: 7.27; 95% CI: 3.15-16.78), repetitive tasks (OR: 4.60; 95% CI: 1.39-15.70), using unadjustable chairs or desks (OR: 3.35; 95% CI: 1.23-9.15), and working with a biosafety cabinet (OR: 2.49; 95% CI: 1.11-5.59). CTS cases had significant longer work duration (17.9 ± 5.6 years) than CTS non-case (11.5 ± 7.4 yeas) with low OR (1.108). This study demonstrates some personal and ergonomic factors associated with CTS among the laboratory technicians, including female gender, arm/hand exertion, pipetting, repetitive tasks, working with a biosafety cabinet, and an unadjusted workstation.

  15. Ergonomic analysis of workplaces in the iron casting industrial pole in Claudio, Minas Gerais--Brazil.

    Science.gov (United States)

    Mottin, Artur Caron; de Miranda, Carlos A Silva; Pagnan, Caroline Salvan; Monken, Olavo Pena

    2012-01-01

    Brazil is currently recognized as the 10th largest producer of castings, and the city of Cláudio, MG is known worldwide as the "Greatest foundry and metallurgical pole in Latin America", with more than 80 companies. However, this large number of enterprises and increasing investments in product development has demanded an increase in manpower and working hours of workers in the sector, proportionally increasing the incidence of occupational related health problems like RSI (repetitive strain injury), WMSDs (work-related musculoskeletal disorders) and industrial accidents. This article aims to characterize the industry from previously conducted case studies to relate the main causes of occupational diseases and outline possible interventions through design, showing how this tool can contribute to improve the working environment, workplace, tools and equipment through ergonomics adjustments.

  16. Handbooks in radiology: Nuclear medicine

    International Nuclear Information System (INIS)

    Datz, F.L.

    1988-01-01

    This series of handbooks covers the basic facts, major concepts and highlights in seven radiological subspecialties. ''Nuclear Medicine'' is a review of the principles, procedures and clinical applications that every radiology resident and practicing general radiologist should know about nuclear medicine. Presented in an outline format it covers all of the organ systems that are imaged by nuclear medicine

  17. Phase-change materials handbook

    Science.gov (United States)

    Hale, D. V.; Hoover, M. J.; Oneill, M. J.

    1972-01-01

    Handbook describes relationship between phase-change materials and more conventional thermal control techniques and discusses materials' space and terrestrial applications. Material properties of most promising phase-change materials and purposes and uses of metallic filler materials in phase-change material composites are provided.

  18. Dentistry and Dental Hygiene Handbook.

    Science.gov (United States)

    New York State Education Dept., Albany. Office of the Professions.

    The handbook contains laws, rules, and regulations of the New York State Education Department that govern dentistry and dental hygiene practice in the state. It describes licensure requirements and includes complete application forms and instructions for obtaining license and first registration as a dentist and dental hygienist. Applicants are…

  19. Biofuel technology handbook. 2. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Rutz, Dominik; Janssen, Rainer

    2008-01-15

    This comprehensive handbook was created in order to promote the production and use of biofuels and to inform politicians, decision makers, biofuel traders and all other relevant stakeholders about the state-of-the-art of biofuels and relevant technologies. The large variety of feedstock types and different conversion technologies are described. Explanations about the most promising bio fuels provide a basis to discuss about the manifold issues of biofuels. The impartial information in this handbook further contributes to diminish existing barriers for the broad use of biofuels. Emphasis of this handbook is on first generation biofuels: bio ethanol, Biodiesel, pure plant oil, and bio methane. It also includes second generation biofuels such as BTL-fuels and bio ethanol from lingo-cellulose as well as bio hydrogen. The whole life cycle of bio fuels is assessed under technical, economical, ecological, and social aspect. Characteristics and applications of bio fuels for transport purposes are demonstrated and evaluated. This is completed by an assessment about the most recent studies on biofuel energy balances. This handbook describes the current discussion about green house gas (GHG) balances and sustainability aspects. GHG calculation methods are presented and potential impacts of biofuel production characterized: deforestation of rainforests and wetlands, loss of biodiversity, water pollution, human health, child labour, and labour conditions.

  20. Handbook of Super 8 Production.

    Science.gov (United States)

    Telzer, Ronnie, Ed.

    This handbook is designed for anyone interested in producing super 8 films at any level of complexity and cost. Separate chapters present detailed discussions of the following topics: super 8 production systems and super 8 shooting and editing systems; budgeting; cinematography and sound recording; preparing to edit; editing; mixing sound tracks;…