acceleration observed in an audio air gas discharge

International Nuclear Information System (INIS)

Ragheb, M.S.

2010-01-01

an audio air gas discharge enclosed in a pyrex glass of 34 mm diameter and 25 cm long , lead to trace the occurrence of an unusual phenomenon. injected relative huge light spots of intense brightness, distributed regularly on the contour and in the center of one of the discharge electrodes, are observed. very high heat is pronounced on both electrodes, while, one of them is higher than the other it attains 660 degree C in 3-4 minutes. series of photographs and registered video films define and clarify the sequence of events that describe the observed phenomenon. the plasma is created by applying an audio power through the electrodes of an air gas discharge of 10 khz and up to 500 watts power supply. the discharge voltage is up to 900 volts: the discharge current flowing through the plasma attains 360 mA. it is found that the discharge system must attain its optimal working conditions in order to produce the amazing phenomena. the obtained plasma is classified as the maximum conditions borders of a γ-discharge type. at these conditions, the corresponding maximum electron temperature and density are 16 eV and 10 15 cm -3 respectively . the observation system succeeded to reveal and to clarify the sequence of the phenomenon events. in addition, by means of the scanning electron microscope and the energy dispersive x- ray systems, the effects on the electrodes surface are investigated and analyzed. the optical observations, in conjunction with the micrograph and surface microanalysis,demonstrate the collision occurrence, of powered agglomerations groups, to the electrode surface. detailed interpretation of that phenomenon suggests a molecular acceleration gaining their energy from the formed plasma due to optimal discharge working conditions. as a consequence, due to the ions agglomerates size this procedure could be considered as a mesoscopic acceleration technique.

Implementing Audio-CASI on Windows’ Platforms

Science.gov (United States)

Cooley, Philip C.; Turner, Charles F.

2011-01-01

Audio computer-assisted self interviewing (Audio-CASI) technologies have recently been shown to provide important and sometimes dramatic improvements in the quality of survey measurements. This is particularly true for measurements requiring respondents to divulge highly sensitive information such as their sexual, drug use, or other sensitive behaviors. However, DOS-based Audio-CASI systems that were designed and adopted in the early 1990s have important limitations. Most salient is the poor control they provide for manipulating the video presentation of survey questions. This article reports our experiences adapting Audio-CASI to Microsoft Windows 3.1 and Windows 95 platforms. Overall, our Windows-based system provided the desired control over video presentation and afforded other advantages including compatibility with a much wider array of audio devices than our DOS-based Audio-CASI technologies. These advantages came at the cost of increased system requirements --including the need for both more RAM and larger hard disks. While these costs will be an issue for organizations converting large inventories of PCS to Windows Audio-CASI today, this will not be a serious constraint for organizations and individuals with small inventories of machines to upgrade or those purchasing new machines today. PMID:22081743

Listened To Any Good Books Lately? The Prosodic Analysis of Audio Book Narration

Directory of Open Access Journals (Sweden)

Smiljana Komar

2006-06-01

Full Text Available The popularity of audio books is increasing. In the USA fewer people are reading books but many more are listening to them on tapes, CD’s and in MP3 format. The phenomenon is redefining the notion of reading. The purpose of the paper is to present some pros and cons of listening to books instead of reading them. The conclusions have been reached on the basis of a linguistic analysis of parts of two audio books belonging to two different literary genres: a crime novel (Dan Brown, The Da Vinci Code and a comic one (Helen Fielding, Bridget Jones: The Edge of Reason.

Effects of a paraspinal-lumbar tape application during 7 days on the perceived area of tape contact.

Science.gov (United States)

Funk, Stefan; Finke, Roy; Zeh, Stefan; Siebert, Tobias; Puta, Christian

2017-05-01

The study aimed to investigate the changes of the perceived area of tape contact during a lumbar tape application that lasted 7 days. Single group, repeated measures study. University research laboratory. Twenty-three healthy collegiate students in sports science. Perceived area of tape contact was collected by preparing a drawing of their individual perceived tape outline into a printed body image. Measurements were obtained immediately after fixation of the tape (day 0), at day 3 and day 7 during application and 5 min after the release of the application (day 7). There was no significant change of the perceived area of tape contact after 3 days of tape application. A significant decrease in the perceived area of tape contact was detected 7 days after application (p area of tape contact of healthy sport students is decreased at 7 days. This effect could not be observed at 3 days. These results provide relevant information for the use of elastic tapes concerning the duration of application in medical therapy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Application for the Tape Station

CERN Document Server

Solero, A

2003-01-01

The Tape Station is used as an Isolde facility to observe the variations of intensity and the lifespan of certain isotopes. A Siemens Simatic FM-352-5 module controls the Tape Station in a PLC system then a DSC controls the PLC, which will be controlled the Tape station program. During the Isolde consolidation project, the Tape Station has been rebuilt, and the control system has been fully integrated in the PS control. Finally, a new application has been written in JAVA Development kit 1.4 and the PS Java environment. The main purpose of this note is to explain how to use this program.

The Individually Focused Interview

DEFF Research Database (Denmark)

Clausen, Aksel Skovgaard

2012-01-01

relatively “strong” interviewees (interview persons: IPs) with diverse backgrounds; (2) thorough planning of the interview with well-focused themes; and (3) a thorough and repeated introduction to the interview. The omission of audio transcriptions is an obvious solution to the researcher who wants a breadth...... of range of statements stemming from the use of many more interviewees than is often possible. The Individually Focused Interview (TIFI) also provides more time for involvement in the field and further analysis....

Teacher Interviews, Student Interviews, and Classroom Observations in Combinatorics: Four Analyses

Science.gov (United States)

Caddle, Mary C.

2012-01-01

This research consists of teacher interviews, student interviews, and classroom observations, all based around the mathematical content area of combinatorics. Combinatorics is a part of discrete mathematics concerning the ordering and grouping of distinct elements. The data are used in four separate analyses. The first provides evidence that…

A Prospective, Randomized Trial in the Emergency Department of Suggestive Audio-Therapy under Deep Sedation for Smoking Cessation.

Science.gov (United States)

Rodriguez, Robert M; Taylor, Opal; Shah, Sushma; Urstein, Susan

2007-08-01

In a sample of patients undergoing procedural deep sedation in the emergency department (ED), we conducted a prospective, randomized, single-blinded trial of audio-therapy for smoking cessation. We asked subjects about their smoking, including desire to quit (0-10 numerical scale) and number of cigarettes smoked per day. Subjects were randomized to either a control tape (music alone) or a tape with repeated smoking-cessation messages over music. Tapes were started with first doses of sedation and stopped with patient arousal. Telephone follow-up occurred between two weeks and three months to assess the number of cigarettes smoked per day. Study endpoints were self-reported complete cessation and decrease of half or more in total cigarettes smoked per day. One hundred eleven patients were enrolled in the study, 54 to intervention and 57 to control. Mean desire to quit was 7.15 +/- 2.6 and mean cigarettes per day was 17.5 +/- 12.1. We successfully contacted 69 (62%) patients. Twenty-seven percent of intervention and 26% of control patients quit (mean difference = 1%; 95% CI: -22.0% to 18.8%). Thirty-seven percent of intervention and 51% of control patients decreased smoking by half or more (mean difference = 14.6%; 95% CI: -8.7% to 35.6%). Suggestive audio-therapy delivered during deep sedation in the ED did not significantly decrease self-reported smoking behavior.

Wavelet-based audio embedding and audio/video compression

Science.gov (United States)

Mendenhall, Michael J.; Claypoole, Roger L., Jr.

2001-12-01

Watermarking, traditionally used for copyright protection, is used in a new and exciting way. An efficient wavelet-based watermarking technique embeds audio information into a video signal. Several effective compression techniques are applied to compress the resulting audio/video signal in an embedded fashion. This wavelet-based compression algorithm incorporates bit-plane coding, index coding, and Huffman coding. To demonstrate the potential of this audio embedding and audio/video compression algorithm, we embed an audio signal into a video signal and then compress. Results show that overall compression rates of 15:1 can be achieved. The video signal is reconstructed with a median PSNR of nearly 33 dB. Finally, the audio signal is extracted from the compressed audio/video signal without error.

Transcript of Audio Narrative Portion of: Scandinavian Heritage. A Set of Five Audio-Visual Film Strip/Cassette Presentations.

Science.gov (United States)

Anderson, Gerald D.; Olson, David B.

The document presents the transcript of the audio narrative portion of approximately 100 interviews with first and second generation Scandinavian immigrants to the United States. The document is intended for use by secondary school classroom teachers as they develop and implement educational programs related to the Scandinavian heritage in…

Tape edge study in a linear tape drive with single-flanged guides

International Nuclear Information System (INIS)

Goldade, A.V.; Bhushan, Bharat

2004-01-01

Improved tape guiding and tape dimensional stability are essential for magnetic tape linear recoding formats to take advantage of vastly increased track density and thereby achieve higher storage capacities. Tape guiding is dependent on numerous parameters, such as type of the guides and tape path geometry, quality of virgin tape edge, drive operating parameters (e.g., tape speed and tape tension), mechanical properties of the tape, and tape geometry (e.g., cupping and curvature). The objective of the present study is to evaluate guiding and tribological performance of single-flanged guides with porous air bearings in a linear tape drive. A comparison of guiding performance of the dual flanged stationary guides and single-flanged guides with porous air bearings is performed. The effect of tape path geometry, drive operating conditions (speed and tension) and tape edge quality of factory-slit tapes on tape guiding are evaluated during short-term tests. A lateral force measurement technique is used to measure the force exerted by the tape edge on the guide flange. A technique for the lateral tape motion measurement is used to study the effect of continuous sliding on tape guiding. Wear tests up to 5000 cycles are conducted and coefficient of friction and lateral tape motion are monitored to study the effect of drive operating conditions (speed and tension), edge quality of factory-slit tapes and tape thickness on tape guiding. Optical microscopy, atomic force microscopy and scanning electron microscopy are employed to study and quantify the quality of tape edge

Perceptions of Dispensers Regarding Dispensing Practices in ...

African Journals Online (AJOL)

Methods: A qualitative study with snowball sampling technique was used to ... Semi-structured interviews were conducted with the dispensers until the ... and suggestions for improvements were audio-taped, transcribed verbatim and analyzed.

Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

Energy Technology Data Exchange (ETDEWEB)

Grin, A. [Building Science Corporation, Somerville, MA (United States); Lstiburek, J. [Building Science Corporation, Somerville, MA (United States)

2014-09-01

The goal of this research is to provide durable and long-term water management solutions using exterior insulating sheathing as part of the water management system. It is possible to tape or seal the joints in insulating sheathing to create a drainage plane and even an air control layer. There exists the material durability component of the tape as well as the system durability component being the taped insulating sheathing as the drainage plane. This measure guideline provides best practice and product recommendations from the interviewed contractors and homebuilders who collectively have a vast amount of experience. Three significant issues were discussed with the group, which are required to make taped insulating sheathing a simple, long-term, and durable drainage plane: horizontal joints should be limited or eliminated wherever possible; where a horizontal joint exists use superior materials; and frequent installation inspection and regular trade training are required to maintain proper installation.

Audio Papers

DEFF Research Database (Denmark)

Groth, Sanne Krogh; Samson, Kristine

2016-01-01

With this special issue of Seismograf we are happy to present a new format of articles: Audio Papers. Audio papers resemble the regular essay or the academic text in that they deal with a certain topic of interest, but presented in the form of an audio production. The audio paper is an extension...

Caring for terminal AIDS patients: The experiences of caregivers in ...

African Journals Online (AJOL)

13 unstructured interviews, which were audio-taped, were conducted with caregivers working full-time in a formal institution caring for patients who are dying from AIDS. The transcribed interviews were analysed using Tesch's method of descriptive analysis (in Creswell 1994:115). One central theme emerged, namely that in ...

A Prospective, Randomized Trial in The Emergency Department Of Suggestive Audio-Therapy Under Deep Sedation for Smoking Cessation

Directory of Open Access Journals (Sweden)

Shah, Sushma

2007-08-01

Full Text Available Objectives: In a sample of patients undergoing procedural deep sedation in the emergency department (ED, we conducted a prospective, randomized, single-blinded trial of audio-therapy for smoking cessation. Methods: We asked subjects about their smoking, including desire to quit (0-10 numerical scale and number of cigarettes smoked per day. Subjects were randomized to either a control tape (music alone or a tape with repeated smoking-cessation messages over music. Tapes were started with first doses of sedation and stopped with patient arousal. Telephone follow-up occurred between two weeks and three months to assess the number of cigarettes smoked per day. Study endpoints were self-reported complete cessation and decrease of half or more in total cigarettes smoked per day. Results: One hundred eleven patients were enrolled in the study, 54 to intervention and 57 to control. Mean desire to quit was 7.15 ± 2.6 and mean cigarettes per day was 17.5 ± 12.1. We successfully contacted 69 (62% patients. Twenty-seven percent of intervention and 26% of control patients quit (mean difference = 1%; 95% CI: –22.0% to 18.8%. Thirty-seven percent of intervention and 51% of control patients decreased smoking by half or more (mean difference = 14.6%; 95% CI: –8.7% to 35.6%. Conclusion: Suggestive audio-therapy delivered during deep sedation in the ED did not significantly decrease self-reported smoking behavior.

Criteria for Evaluating Oral History Interviews.

Science.gov (United States)

Fonsino, Frank J.

1980-01-01

Discusses the rationale for establishing criteria for evaluating oral history interviews. Presents seven evaluation categories relating to oral history tapes and three categories relating to typescripts. (CK)

Tape transport mechanism

International Nuclear Information System (INIS)

Groh, E.F.; McDowell, W.; Modjeski, N.S.; Keefe, D.J.; Groer, P.

1979-01-01

A device is provided for transporting, in a stepwise manner, tape between a feed reel and takeup reel. An indexer moves across the normal path of the tape displacing it while the tape on the takeup reel side of the indexer is braked. After displacement, the takeup reel takes up the displaced tape while the tape on the feed reel side of the indexer is braked, providing stepwise tape transport in precise intervals determined by the amount of displacement caused by the indexer

Community members' views on Addis Ababa University's rural ...

African Journals Online (AJOL)

... University's rural community health training program: A qualitative study. ... A total of five FGDs and six key informant interviews were conducted using a ... The audio-taped data was later transcribed verbatim and translated into English.

APLIKASI MEDIA AUDIO-VISUAL DALAM PEMBELAJARAN SPEAKING SKILL DENGAN PENDEKATAN AUDIOLINGUAL: Studi Kasus di MAN Batang

Directory of Open Access Journals (Sweden)

Slamet Untung

2012-10-01

Full Text Available The research to study the application of audio and visual medium in order to learn speaking skill by audiolingual approach is a good contribution to educational world of senior high school and the Islamic one, particularly, in finding a way to improving the learning component relating directly to the medium and method of learning speaking skill. This research is to find out its significance and relevance. The main variable of this research includes the whole activities of the application of audio and visual medium in learning speaking skill by audio-lingual approach. The data were collected through observation, interview, questionnaire and documentation. This research took place in state Islamic senior high school of Batang in Central Java. The result shows that the application helps the students to speak English correctly and accurately and stresses the message of the speaking skill learning.

IBM 3480 tape cartridge

CERN Multimedia

1984-01-01

The 3480 tape format is a magnetic tape data storage format developed by IBM. The cartridge contains a single reel. IBM’s 3480 cartridge tape system sought to replace the traditional reels of magnetic tape in the computer center. Because of their speed, reliability, durability and low media cost, these tapes and tape drives are still in high demand. A hallmark of the genre is transferability. Tapes recorded with one tape drive are generally readable on another drive, even if the tape drives were built by different manufacturers.

Intelligent audio analysis

CERN Document Server

Schuller, Björn W

2013-01-01

This book provides the reader with the knowledge necessary for comprehension of the field of Intelligent Audio Analysis. It firstly introduces standard methods and discusses the typical Intelligent Audio Analysis chain going from audio data to audio features to audio recognition.  Further, an introduction to audio source separation, and enhancement and robustness are given. After the introductory parts, the book shows several applications for the three types of audio: speech, music, and general sound. Each task is shortly introduced, followed by a description of the specific data and methods applied, experiments and results, and a conclusion for this specific task. The books provides benchmark results and standardized test-beds for a broader range of audio analysis tasks. The main focus thereby lies on the parallel advancement of realism in audio analysis, as too often today’s results are overly optimistic owing to idealized testing conditions, and it serves to stimulate synergies arising from transfer of ...

pyAudioAnalysis: An Open-Source Python Library for Audio Signal Analysis.

Science.gov (United States)

Giannakopoulos, Theodoros

2015-01-01

Audio information plays a rather important role in the increasing digital content that is available today, resulting in a need for methodologies that automatically analyze such content: audio event recognition for home automations and surveillance systems, speech recognition, music information retrieval, multimodal analysis (e.g. audio-visual analysis of online videos for content-based recommendation), etc. This paper presents pyAudioAnalysis, an open-source Python library that provides a wide range of audio analysis procedures including: feature extraction, classification of audio signals, supervised and unsupervised segmentation and content visualization. pyAudioAnalysis is licensed under the Apache License and is available at GitHub (https://github.com/tyiannak/pyAudioAnalysis/). Here we present the theoretical background behind the wide range of the implemented methodologies, along with evaluation metrics for some of the methods. pyAudioAnalysis has been already used in several audio analysis research applications: smart-home functionalities through audio event detection, speech emotion recognition, depression classification based on audio-visual features, music segmentation, multimodal content-based movie recommendation and health applications (e.g. monitoring eating habits). The feedback provided from all these particular audio applications has led to practical enhancement of the library.

Pre-Medicare Eligible Individuals’ Decision-Making In Medicare Part D: An Interview Study

Directory of Open Access Journals (Sweden)

Tao Jin, B.S. Pharm, Ph.D. Candidate

2010-01-01

Full Text Available ObjectivesThe objective of this study was to elicit salient beliefs among pre-Medicare eligible individuals regarding (1 the outcomes associated with enrolling in the Medicare Part D program; (2 those referents who might influence participants’ decisions about enrolling in the Part D program; and (3 the perceived barriers and facilitators facing those considering enrolling in the Part D program.MethodsFocused interviews were used for collecting data. A sample of 10 persons between 62 and 64 years of age not otherwise enrolled in the Medicare program was recruited. Interviews were audio taped and field notes were taken concurrently. Audio recordings were reviewed to amend field notes until obtaining a thorough reflection of interviews. Field notes were analyzed to elicit a group of beliefs, which were coded into perceived outcomes, the relevant others who might influence Medicare Part D enrollment decisions and perceived facilitators and impediments. By extracting those most frequently mentioned beliefs, modal salient sets of behavioral beliefs, relevant referents, and control beliefs were identified.ResultsAnalyses showed that (1 most pre-Medicare eligible believed that Medicare Part D could “provide drug coverage”, “save money on medications”, and “provide financial and health security in later life”. However, “monthly premiums”, “the formulary with limited drug coverage” and “the complexity of Medicare Part D” were perceived as major disadvantages; (2 immediate family members are most likely to influence pre-Medicare eligible’s decisions about Medicare Part D enrollment; and (3 internet and mailing educational brochures are considered to be most useful resources for Medicare Part D enrollment. Major barriers to enrollment included the complexity and inadequacy of insurance plan information.ConclusionThere are multiple factors related to decision-making surrounding the Medicare Part D enrollment. These factors

Pre-Medicare Eligible Individuals' Decision-Making In Medicare Part D: An Interview Study

Directory of Open Access Journals (Sweden)

Tao Jin

2010-01-01

Full Text Available Objectives: The objective of this study was to elicit salient beliefs among pre-Medicare eligible individuals regarding (1 the outcomes associated with enrolling in the Medicare Part D program; (2 those referents who might influence participants' decisions about enrolling in the Part D program; and (3 the perceived barriers and facilitators facing those considering enrolling in the Part D program. Methods: Focused interviews were used for collecting data. A sample of 10 persons between 62 and 64 years of age not otherwise enrolled in the Medicare program was recruited. Interviews were audio taped and field notes were taken concurrently. Audio recordings were reviewed to amend field notes until obtaining a thorough reflection of interviews. Field notes were analyzed to elicit a group of beliefs, which were coded into perceived outcomes, the relevant others who might influence Medicare Part D enrollment decisions and perceived facilitators and impediments. By extracting those most frequently mentioned beliefs, modal salient sets of behavioral beliefs, relevant referents, and control beliefs were identified. Results: Analyses showed that (1 most pre-Medicare eligible believed that Medicare Part D could "provide drug coverage", "save money on medications", and "provide financial and health security in later life". However, "monthly premiums", "the formulary with limited drug coverage" and "the complexity of Medicare Part D" were perceived as major disadvantages; (2 immediate family members are most likely to influence pre-Medicare eligible's decisions about Medicare Part D enrollment; and (3 internet and mailing educational brochures are considered to be most useful resources for Medicare Part D enrollment. Major barriers to enrollment included the complexity and inadequacy of insurance plan information. Conclusion: There are multiple factors related to decision-making surrounding the Medicare Part D enrollment. These factors include the advantages

The audio expert everything you need to know about audio

CERN Document Server

Winer, Ethan

2012-01-01

The Audio Expert is a comprehensive reference that covers all aspects of audio, with many practical, as well as theoretical, explanations. Providing in-depth descriptions of how audio really works, using common sense plain-English explanations and mechanical analogies with minimal math, the book is written for people who want to understand audio at the deepest, most technical level, without needing an engineering degree. It's presented in an easy-to-read, conversational tone, and includes more than 400 figures and photos augmenting the text.The Audio Expert takes th

Tape dig selv!

DEFF Research Database (Denmark)

Andersen, Bente Annie Sørine; Neergaard, Christian; Seest, Kristian

Håndbog med over 50 tape-teknikker, hvor den klassiske hvide sportstape (Dream Tape) og den originale kinesiotape (Kinesio Tex Gold) bruges. Konkrete anvisninger og praktiske råd gives......Håndbog med over 50 tape-teknikker, hvor den klassiske hvide sportstape (Dream Tape) og den originale kinesiotape (Kinesio Tex Gold) bruges. Konkrete anvisninger og praktiske råd gives...

Video Taping and Abnormal Psychology: Dramatized Clinical Interviews.

Science.gov (United States)

Lyons, Michael J.; And Others

1984-01-01

Students in an abnormal psychology course worked in teams to produce dramatizations of diagnostic interviews and then presented them in class. Positive and negative aspects of the activity are discussed. (RM)

Recovery of heritage software stored on magnetic tape for Commodore microcomputers

Directory of Open Access Journals (Sweden)

Denise de Vries

2016-12-01

Full Text Available Digital games make up a significant but little known chapter in the history of the moving image in Australia and New Zealand.  Beginning in the early 1980s, the Australasian software industry developed a remarkable record of content creation. The ``Play It Again'' project is conducting research into the largely unknown histories of 1980s game development in Australia and New Zealand, ensuring that local titles make it into national collections and are documented and preserved, enabling the public to once again play these games. Microcomputers from the 1980s made extensive use of compact audio cassettes to distribute software as an inexpensive alternative to the floppy disk technology available at the time. Media from this era are at risk of degradation and are rapidly approaching the end of their lifespan. As hardware platforms and peripheral devices become obsolete, access to the data for future scholars and other interested parties becomes more difficult. In this article, we present a case study, wherein we investigate the issues involved in making digital copies with a view to the long term preservation of these software artefacts. A video game title stored on standard compact cassette for Commodore's popular VIC-20 machine, ``Dinky Kong'' by Mark Sibley was recorded using both inexpensive amateur and professional playback equipment. The audio files obtained were processed using freely available software, alongside a customised decoder written in MATLAB and Perl. The resulting image files were found to be playable using an emulator. More importantly, the integrity of the data itself was verified, by making use of error detection features inbuilt to the Commodore tape format, which is described in detail. Issues influencing the quality of the recovered image files such as the bit rate of the digital recording are discussed. The phenomenon of audio dropout on magnetic tape is shown be of some concern, however there exist signal processing

Research

African Journals Online (AJOL)

abp

2014-01-17

Jan 17, 2014 ... Each session of the in-depth interview was recorded via audio tape and ... significance of IPT medication adherence as a critical for positive health outcomes. ... are 9.4 million incident cases, 0.38 million deaths among HIV-.

A Qualitative Insight

African Journals Online (AJOL)

The interviews, which were audio-taped and transcribed verbatim, were evaluated by thematic content analysis and further verified by other authors' analyses. Results: Thematic content analysis identified three major themes: knowledge of generic medicines, perception towards generic medicines, and attitude towards ...

Audio Conferencing Enhancements

OpenAIRE

VESTERINEN, LEENA

2006-01-01

Audio conferencing allows multiple people in distant locations to interact in a single voice call. Whilst it can be very useful service it also has several key disadvantages. This thesis study investigated the options for improving the user experience of the mobile teleconferencing applications. In particular, the use of 3D, spatial audio and visualinteractive functionality was investigated as the means of improving the intelligibility and audio perception during the audio...

Comparison of audio computer assisted self-interview and face-to-face interview methods in eliciting HIV-related risks among men who have sex with men and men who inject drugs in Nigeria.

Science.gov (United States)

Adebajo, Sylvia; Obianwu, Otibho; Eluwa, George; Vu, Lung; Oginni, Ayo; Tun, Waimar; Sheehy, Meredith; Ahonsi, Babatunde; Bashorun, Adebobola; Idogho, Omokhudu; Karlyn, Andrew

2014-01-01

Face-to-face (FTF) interviews are the most frequently used means of obtaining information on sexual and drug injecting behaviours from men who have sex with men (MSM) and men who inject drugs (MWID). However, accurate information on these behaviours may be difficult to elicit because of sociocultural hostility towards these populations and the criminalization associated with these behaviours. Audio computer assisted self-interview (ACASI) is an interviewing technique that may mitigate social desirability bias in this context. This study evaluated differences in the reporting of HIV-related risky behaviours by MSM and MWID using ACASI and FTF interviews. Between August and September 2010, 712 MSM and 328 MWID in Nigeria were randomized to either ACASI or FTF interview for completion of a behavioural survey that included questions on sensitive sexual and injecting risk behaviours. Data were analyzed separately for MSM and MWID. Logistic regression was run for each behaviour as a dependent variable to determine differences in reporting methods. MSM interviewed via ACASI reported significantly higher risky behaviours with both women (multiple female sexual partners 51% vs. 43%, p = 0.04; had unprotected anal sex with women 72% vs. 57%, p = 0.05) and men (multiple male sex partners 70% vs. 54%, p≤0.001) than through FTF. Additionally, they were more likely to self-identify as homosexual (AOR: 3.3, 95%CI:2.4-4.6) and report drug use in the past 12 months (AOR:40.0, 95%CI: 9.6-166.0). MWID interviewed with ACASI were more likely to report needle sharing (AOR:3.3, 95%CI:1.2-8.9) and re-use (AOR:2.2, 95%CI:1.2-3.9) in the past month and prior HIV testing (AOR:1.6, 95%CI 1.02-2.5). The feasibility of using ACASI in studies and clinics targeting key populations in Nigeria must be explored to increase the likelihood of obtaining more accurate data on high risk behaviours to inform improved risk reduction strategies that reduce HIV transmission.

AC power losses in Bi-2223/Ag HTS tapes

International Nuclear Information System (INIS)

Savvides, N.; Reilly, D.; Mueller, K.-H.; Herrmann, J.

1998-01-01

Full text: We report measurements at 77 K of the transport ac losses of Bi-2223/Ag composite tapes. The investigated tapes vary from single filament to multifilament construction and include both conventional tapes and other conductor shapes with twisted filaments. The self-field ac losses were determined at 77 K and 60 Hz as a function of ac current amplitude (0 - 100 A). We observe different behaviour among tapes depending on their quality and strain history. For 'good' virgin tapes the experimental data are well described by the Norris equations for the dependence of power loss P on the amplitude I m of the transport current. The data of good monofilament tapes are fitted to the Norris equation P ∼ I m n for an elliptical cross section (ie. n = 3) and the data of good multifilament tapes are fitted to the Norris equation for a rectangular strip (ie. n = 4). Many specimens, however, show a range of behaviour with lower values of n. Based on our work on the effect of strain on the dc transport properties of tapes, we carried out detailed investigations of the effect of controlled applied bend strain on the ac loss. Our results show that irreversible damage to superconducting filaments (ie. cracks) cause the ac loss to rise and n to decrease with increasing strain. In addition, applied strains much greater than the irreversible strain limit cause the ac loss to increase by several orders of magnitude and become ohmic in character with n = 2. Theoretical work is in progress to model the observed behaviour

Is audio computer-assisted self-interview (ACASI useful in risk behaviour assessment of female and male sex workers, Mombasa, Kenya?

Directory of Open Access Journals (Sweden)

Elisabeth M van der Elst

Full Text Available Audio computer-assisted self-interview (ACASI may elicit more frequent reporting of socially sensitive behaviours than face-to-face (FtF-interview. However, no study compared responses to both methods in female and male sex workers (FSW; MSW in Africa.We sequentially enrolled adults recruited for an HIV-1 intervention trial into a comparative study of ACASI and FtF-interview, in a clinic near Mombasa, Kenya. Feasibility and acceptability of ACASI, and a comparative analysis of enrolment responses between ACASI and FtF on an identical risk assessment questionnaire were evaluated. In total, 139 women and 259 men, 81% of eligible cohort participants, completed both interviews. ACASI captured a higher median number of regular (2 vs. 1, p<0.001, both genders and casual partners in the last week (3 vs. 2, p = 0.04 in women; 2 vs. 1, p<0.001 in men. Group sex (21.6 vs. 13.5%, p<0.001, in men, intravenous drug use (IDU; 10.8 vs. 2.3%, p<0.001 in men; 4.4 vs. 0%, p = 0.03 in women, and rape (8.9 vs. 3.9%, p = 0.002, in men were reported more frequently in ACASI. A surprisingly high number of women reported in ACASI that they had paid for sex (49.3 vs. 5.8%, p<0.001. Behaviours for recruitment (i.e. anal sex, sex work, sex between males were reported less frequently in ACASI. The majority of women (79.2% and men (69.7% felt that answers given in ACASI were more honest. Volunteers who were not able to take ACASI (84 men, and 37 women mostly lacked reading skills.About 1 in 5 cohort participants was not able to complete ACASI, mostly for lack of reading skills. Participants who completed ACASI were more likely to report IDU, rape, group sex, and payment for sex by women than when asked in FtF interview. ACASI appears to be a useful tool for high risk behaviour assessments in the African context.

Getting More out of Your Interview Data: Toward a Framework for Debriefing the Transcriber of Interviews

Science.gov (United States)

Weinbaum, Rebecca K.; Onwuegbuzie, Anthony J.

2016-01-01

In most qualitative research studies involving the creation of interview transcriptions, researchers seldom demonstrate much reflexivity about the transcription process, rarely making mention of transcription processes as part of their reporting of data collection and analysis procedures beyond a simple statement that audio- or videotaped data…

Audio Twister

DEFF Research Database (Denmark)

Cermak, Daniel; Moreno Garcia, Rodrigo; Monastiridis, Stefanos

2015-01-01

Daniel Cermak-Sassenrath, Rodrigo Moreno Garcia, Stefanos Monastiridis. Audio Twister. Installation. P-Hack Copenhagen 2015, Copenhagen, DK, Apr 24, 2015.......Daniel Cermak-Sassenrath, Rodrigo Moreno Garcia, Stefanos Monastiridis. Audio Twister. Installation. P-Hack Copenhagen 2015, Copenhagen, DK, Apr 24, 2015....

Back to basics audio

CERN Document Server

Nathan, Julian

1998-01-01

Back to Basics Audio is a thorough, yet approachable handbook on audio electronics theory and equipment. The first part of the book discusses electrical and audio principles. Those principles form a basis for understanding the operation of equipment and systems, covered in the second section. Finally, the author addresses planning and installation of a home audio system.Julian Nathan joined the audio service and manufacturing industry in 1954 and moved into motion picture engineering and production in 1960. He installed and operated recording theaters in Sydney, Austra

DOA Estimation of Audio Sources in Reverberant Environments

DEFF Research Database (Denmark)

Jensen, Jesper Rindom; Nielsen, Jesper Kjær; Heusdens, Richard

2016-01-01

Reverberation is well-known to have a detrimental impact on many localization methods for audio sources. We address this problem by imposing a model for the early reflections as well as a model for the audio source itself. Using these models, we propose two iterative localization methods...... that estimate the direction-of-arrival (DOA) of both the direct path of the audio source and the early reflections. In these methods, the contribution of the early reflections is essentially subtracted from the signal observations before localization of the direct path component, which may reduce the estimation...

Portable MP3 players: innovative devices for recording qualitative interviews.

Science.gov (United States)

Fernandez, Ritin S; Griffiths, Rhonda

2007-01-01

Digital technology has provided a new way of recording qualitative interviews, surpassing the clarity, usability and storage capabilities of conventional tape recorders. Ritin Fernandez and Rhonda Griffiths examine a technological resource that pervades modern social life and which can be used effectively for digitally recording interviews for qualitative research.

Multi-filamentary REBCO tapes fabricated by scratching a buffer layer along the tape longitudinal direction

Energy Technology Data Exchange (ETDEWEB)

Kurihara, Chihaya, E-mail: chihaya.kurihara@jp.fujikura.com [Fujikura Ltd., 1440, Mutsuzaki, Sakura, Chiba 285-8550 (Japan); Fujita, Shinji; Nakamura, Naonori; Igarashi, Mitsunori; Iijima, Yasuhiro [Fujikura Ltd., 1440, Mutsuzaki, Sakura, Chiba 285-8550 (Japan); Higashikawa, Kohei; Uetsuhara, Dai; Kiss, Takanobu; Iwakuma, Masataka [Kyushu University, 744 Motooka, Nishi-Ku, Fukuoka 819-0395 (Japan)

2016-11-15

Highlights: • We developed new method of slitting tape between buffer layer processes for multi-filamentary tape. • By scratching buffer layer along the tape longitudinal direction, we find that REBCO layer is divided easily without damaging it. • We have developed 100 m class multi-filamentary REBCO tapes which are suitable for superconducting coils. - Abstract: A method for making multi-filamentary REBCO tapes by only scratching buffer layer was developed for coil application which requires accurate magnetic fields. By continuous I{sub c} measurement, we found that our new multi-filamentary tape could provide almost equal I{sub c} compared to conventional tapes. Then, using EBSD and RTR-SHPM methods, a divided structure of REBCO layer was surely confirmed. AC loss was also decreased. Furthermore, the result of delamination test of our new multi-filamentary tape showed enough mechanical property. As a result, we have succeeded in developing 100 m class multi-filamentary tape for superconducting coil.

Multi-filamentary REBCO tapes fabricated by scratching a buffer layer along the tape longitudinal direction

International Nuclear Information System (INIS)

Kurihara, Chihaya; Fujita, Shinji; Nakamura, Naonori; Igarashi, Mitsunori; Iijima, Yasuhiro; Higashikawa, Kohei; Uetsuhara, Dai; Kiss, Takanobu; Iwakuma, Masataka

2016-01-01

Highlights: • We developed new method of slitting tape between buffer layer processes for multi-filamentary tape. • By scratching buffer layer along the tape longitudinal direction, we find that REBCO layer is divided easily without damaging it. • We have developed 100 m class multi-filamentary REBCO tapes which are suitable for superconducting coils. - Abstract: A method for making multi-filamentary REBCO tapes by only scratching buffer layer was developed for coil application which requires accurate magnetic fields. By continuous I_c measurement, we found that our new multi-filamentary tape could provide almost equal I_c compared to conventional tapes. Then, using EBSD and RTR-SHPM methods, a divided structure of REBCO layer was surely confirmed. AC loss was also decreased. Furthermore, the result of delamination test of our new multi-filamentary tape showed enough mechanical property. As a result, we have succeeded in developing 100 m class multi-filamentary tape for superconducting coil.

Comparison of audio computer assisted self-interview and face-to-face interview methods in eliciting HIV-related risks among men who have sex with men and men who inject drugs in Nigeria.

Directory of Open Access Journals (Sweden)

Sylvia Adebajo

Full Text Available INTRODUCTION: Face-to-face (FTF interviews are the most frequently used means of obtaining information on sexual and drug injecting behaviours from men who have sex with men (MSM and men who inject drugs (MWID. However, accurate information on these behaviours may be difficult to elicit because of sociocultural hostility towards these populations and the criminalization associated with these behaviours. Audio computer assisted self-interview (ACASI is an interviewing technique that may mitigate social desirability bias in this context. METHODS: This study evaluated differences in the reporting of HIV-related risky behaviours by MSM and MWID using ACASI and FTF interviews. Between August and September 2010, 712 MSM and 328 MWID in Nigeria were randomized to either ACASI or FTF interview for completion of a behavioural survey that included questions on sensitive sexual and injecting risk behaviours. Data were analyzed separately for MSM and MWID. Logistic regression was run for each behaviour as a dependent variable to determine differences in reporting methods. RESULTS: MSM interviewed via ACASI reported significantly higher risky behaviours with both women (multiple female sexual partners 51% vs. 43%, p = 0.04; had unprotected anal sex with women 72% vs. 57%, p = 0.05 and men (multiple male sex partners 70% vs. 54%, p≤0.001 than through FTF. Additionally, they were more likely to self-identify as homosexual (AOR: 3.3, 95%CI:2.4-4.6 and report drug use in the past 12 months (AOR:40.0, 95%CI: 9.6-166.0. MWID interviewed with ACASI were more likely to report needle sharing (AOR:3.3, 95%CI:1.2-8.9 and re-use (AOR:2.2, 95%CI:1.2-3.9 in the past month and prior HIV testing (AOR:1.6, 95%CI 1.02-2.5. CONCLUSION: The feasibility of using ACASI in studies and clinics targeting key populations in Nigeria must be explored to increase the likelihood of obtaining more accurate data on high risk behaviours to inform improved risk reduction strategies

Placement suitability criteria of composite tape for mould surface in automated tape placement

Directory of Open Access Journals (Sweden)

Zhang Peng

2015-10-01

Full Text Available Automated tape placement is an important automated process used for fabrication of large composite structures in aeronautical industry. The carbon fiber composite parts realized with this process tend to replace the aluminum parts produced by high-speed machining. It is difficult to determine the appropriate width of the composite tape in automated tape placement. Wrinkling will appear in the tape if it does not suit for the mould surface. Thus, this paper deals with establishing placement suitability criteria of the composite tape for the mould surface. With the assumptions for ideal mapping and by applying some principles and theorems of differential geometry, the centerline trajectory of the composite tape is identified to follow the geodesic. The placement suitability of the composite tape is examined on three different types of non-developable mould surfaces and four criteria are derived. The developed criteria have been used to test the deposition process over several mould surfaces and the appropriate width for each mould surface is obtained by referring to these criteria.

Enhancing the low-level tape layer of CERN Tape Archive software

CERN Document Server

AUTHOR|(CDS)2160814; Ruse, Laura Cristina; Vasilescu, Laura

CERN manages the largest scientific data archive in the HEP domain. The archive currently holds over 180 Petabytes, with forecasts of up to 100PB of new data added per year. Considering this numbers, the most cost-effective solution for storage in terms of capacity and maintenance is represented by magnetic tapes. The drawback of this solution is the access time which can raise to several minutes for a series of files. In an environment where very large volumes of physics data are being traded from tape to disk and vice versa, this issue becomes a serious performance bottleneck. This thesis introduces two low-level tape access optimizations: first, adding support for the Recommended Access Order (RAO), a mechanism offered by the tape hardware infrastructure to compute the file order corresponding to the minimum access time. We will present our solution for including RAO in the file retrieval operations in CERN tape archive software in order to benefit from the reduced reading time. The second optimization ...

Three-dimensional modelling of metal evaporated tape

International Nuclear Information System (INIS)

Kay, G.E.

1999-06-01

As developments in magnetic recording increase, the demands for high density recording media continue to rise. One particular medium developed towards meeting these needs is the commercially successful metal evaporated (ME) tape. To provide a deeper understanding of the magnetic processes occurring in recording media, theoretical studies are carried out to complement experimental observations. Therefore, this thesis is concerned with developing a micromagnetic model to simulate the magnetic behaviour of ME tape. ME tape consists of bundles of granular columns which are tilted towards the film normal. The morphology of the film influences the magnetic behaviour and a 3D model is developed in this thesis to represent the columnar structure and the granular nature of ME tape. A Monte Carlo algorithm, consisting of a 'move and grow' procedure, is developed to generate an irregular system of spherical grains whose radii were generated from a log-normal distribution. This structure provides the foundation for modelling columns of ME tape. Initially an isolated column of ME tape was investigated. Grains were considered to be single domain and the dynamic process of the magnetic moments was explored by the Landau-Lifschitz equation. The model demonstrated that as the strength of the exchange coupling parameter increased, then moments which were strongly coupled resisted large negative fields and square hysteresis loops with a high coercivity were produced. Reversal of the moments was observed to be initiated at the ends of a column and then propagated throughout the column. This was attributed to large demagnetising fields and was particularly evident in the model with aligned easy axes. If the easy axes were randomly orientated then more disorder was present in the model and moments rotated incoherently. This produced hysteresis loops that were less square than those of the aligned model. The results also showed how the microstructure influenced the reversal processes

Investigating the impact of audio instruction and audio-visual biofeedback for lung cancer radiation therapy

Science.gov (United States)

George, Rohini

Lung cancer accounts for 13% of all cancers in the Unites States and is the leading cause of deaths among both men and women. The five-year survival for lung cancer patients is approximately 15%.(ACS facts & figures) Respiratory motion decreases accuracy of thoracic radiotherapy during imaging and delivery. To account for respiration, generally margins are added during radiation treatment planning, which may cause a substantial dose delivery to normal tissues and increase the normal tissue toxicity. To alleviate the above-mentioned effects of respiratory motion, several motion management techniques are available which can reduce the doses to normal tissues, thereby reducing treatment toxicity and allowing dose escalation to the tumor. This may increase the survival probability of patients who have lung cancer and are receiving radiation therapy. However the accuracy of these motion management techniques are inhibited by respiration irregularity. The rationale of this thesis was to study the improvement in regularity of respiratory motion by breathing coaching for lung cancer patients using audio instructions and audio-visual biofeedback. A total of 331 patient respiratory motion traces, each four minutes in length, were collected from 24 lung cancer patients enrolled in an IRB-approved breathing-training protocol. It was determined that audio-visual biofeedback significantly improved the regularity of respiratory motion compared to free breathing and audio instruction, thus improving the accuracy of respiratory gated radiotherapy. It was also observed that duty cycles below 30% showed insignificant reduction in residual motion while above 50% there was a sharp increase in residual motion. The reproducibility of exhale based gating was higher than that of inhale base gating. Modeling the respiratory cycles it was found that cosine and cosine 4 models had the best correlation with individual respiratory cycles. The overall respiratory motion probability distribution

The Imation 9840 Tape Cartridge

CERN Multimedia

It’s a 20 GB uncompressed center-load cartridge used in StorageTek T9840 tape drives. The tape is a Metal Particle (MP) tape suitable for use on all Oracle/Sun/StorageTek 9840 A, B, C and D drives. The 9840 tape has an archival life of 15-30 years.

Degradation characteristics of 2G HTS tapes with respect to an electrical breakdown

International Nuclear Information System (INIS)

Kang, Jong O; Lee, On You; Mo, Young Kyu; Kim, Jun Il; Bang, Seung Min; Lee, Hong Seok; Kang, Hyoung Ku; Lee, Jae Hun; Jang, Cheol Yeong

2015-01-01

The electrical insulation design for a superconducting coil system is important for developing high voltage superconducting apparatuses. Also, the degraded characteristics of superconducting tapes due to an electrical breakdown should be considered for superconducting coils design. In this study, the degradation characteristics of 2G high temperature superconducting (HTS) tapes were studied with respect to electrical breakdown tests. The degradation tests of 2G HTS tapes were performed with various stabilizer materials. The degradation characteristics of 2G HTS tapes such as critical current(Ic) and index number were observed by performing electrical breakdown tests. It was found that the characteristics such as Ic and index number can be degraded by an electrical breakdown. Moreover, it was concluded that the degradation characteristics of 2G HTS tapes were affected by a stabilizer material and applied breakdown voltage. The cross sectional view of 2G HTS tapes was observed by using a scanning electron microscope (SEM). As results, it is found that the degradation characteristics of 2G HTS tapes are concerned with hardness and electrical resistivity of stabilizer layers

Effects of ankle eversion taping using kinesiology tape in a patient with ankle inversion sprain

OpenAIRE

Lee, Sun-Min; Lee, Jung-Hoon

2016-01-01

[Purpose] The aim of this study was to report the effects of ankle eversion taping using kinesiology tape on ankle inversion sprain. [Subject] The subject was a 21-year-old woman with Grade 2 ankle inversion sprain. [Methods] Ankle eversion taping was applied to the sprained left ankle using kinesiology tape for 4 weeks (average, 15?h/day). [Results] Ankle instability and pain were reduced, and functional dynamic balance was improved after ankle eversion taping for 4 weeks. The Cumberland Ank...

Use of binaural beat tapes for treatment of anxiety: a pilot study of tape preference and outcomes.

Science.gov (United States)

Le Scouarnec, R P; Poirier, R M; Owens, J E; Gauthier, J; Taylor, A G; Foresman, P A

2001-01-01

Recent studies and anecdotal reports suggest that binaural auditory beats can affect mood, performance on vigilance tasks, and anxiety. To determine whether mildly anxious people would report decreased anxiety after listening daily for 1 month to tapes imbedded with tones that create binaural beats, and whether they would show a definite tape preference among 3 tapes. A 1-group pre-posttest pilot study. Patients' homes. A volunteer sample of 15 mildly anxious patients seen in the Clinique Psyché, Montreal, Quebec. Participants were asked to listen at least 5 times weekly for 4 weeks to 1 or more of 3 music tapes containing tones that produce binaural beats in the electroencephalogram delta/theta frequency range. Participants also were asked to record tape usage, tape preference, and anxiety ratings in a journal before and after listening to the tape or tapes. Anxiety ratings before and after tape listening, pre- and post-study State-Trait Anxiety Inventory scores, and tape preferences documented in daily journals. Listening to the binaural beat tapes resulted in a significant reduction in the anxiety score reported daily in patients' diaries. The number of times participants listened to the tapes in 4 weeks ranged from 10 to 17 (an average of 1.4 to 2.4 times per week) for approximately 30 minutes per session. End-of-study tape preferences indicated that slightly more participants preferred tape B, with its pronounced and extended patterns of binaural beats, over tapes A and C. Changes in pre- and posttest listening State-Trait Anxiety Inventory scores trended toward a reduction of anxiety, but these differences were not statistically significant. Listening to binaural beat tapes in the delta/theta electroencephalogram range may be beneficial in reducing mild anxiety. Future studies should account for music preference among participants and include age as a factor in outcomes, incentives to foster tape listening, and a physiologic measure of anxiety reduction. A

Audio-visual biofeedback for respiratory-gated radiotherapy: Impact of audio instruction and audio-visual biofeedback on respiratory-gated radiotherapy

International Nuclear Information System (INIS)

George, Rohini; Chung, Theodore D.; Vedam, Sastry S.; Ramakrishnan, Viswanathan; Mohan, Radhe; Weiss, Elisabeth; Keall, Paul J.

2006-01-01

Purpose: Respiratory gating is a commercially available technology for reducing the deleterious effects of motion during imaging and treatment. The efficacy of gating is dependent on the reproducibility within and between respiratory cycles during imaging and treatment. The aim of this study was to determine whether audio-visual biofeedback can improve respiratory reproducibility by decreasing residual motion and therefore increasing the accuracy of gated radiotherapy. Methods and Materials: A total of 331 respiratory traces were collected from 24 lung cancer patients. The protocol consisted of five breathing training sessions spaced about a week apart. Within each session the patients initially breathed without any instruction (free breathing), with audio instructions and with audio-visual biofeedback. Residual motion was quantified by the standard deviation of the respiratory signal within the gating window. Results: Audio-visual biofeedback significantly reduced residual motion compared with free breathing and audio instruction. Displacement-based gating has lower residual motion than phase-based gating. Little reduction in residual motion was found for duty cycles less than 30%; for duty cycles above 50% there was a sharp increase in residual motion. Conclusions: The efficiency and reproducibility of gating can be improved by: incorporating audio-visual biofeedback, using a 30-50% duty cycle, gating during exhalation, and using displacement-based gating

Stick-slip substructure in rapid tape peeling

KAUST Repository

Thoroddsen, Sigurdur T.

2010-10-15

The peeling of adhesive tape is known to proceed with a stick-slip mechanism and produces a characteristic ripping sound. The peeling also produces light and when peeled in a vacuum, even X-rays have been observed, whose emissions are correlated with the slip events. Here we present direct imaging of the detachment zone when Scotch tape is peeled off at high speed from a solid surface, revealing a highly regular substructure, during the slip phase. The typical 4-mm-long slip region has a regular substructure of transverse 220 μm wide slip bands, which fracture sideways at speeds over 300 m/s. The fracture tip emits waves into the detached section of the tape at ∼100 m/s, which promotes the sound, so characteristic of this phenomenon.

Stick-slip substructure in rapid tape peeling

KAUST Repository

Thoroddsen, Sigurdur T; Nguyen, H. D.; Takehara, K.; Etoh, T. G.

2010-01-01

The peeling of adhesive tape is known to proceed with a stick-slip mechanism and produces a characteristic ripping sound. The peeling also produces light and when peeled in a vacuum, even X-rays have been observed, whose emissions are correlated with the slip events. Here we present direct imaging of the detachment zone when Scotch tape is peeled off at high speed from a solid surface, revealing a highly regular substructure, during the slip phase. The typical 4-mm-long slip region has a regular substructure of transverse 220 μm wide slip bands, which fracture sideways at speeds over 300 m/s. The fracture tip emits waves into the detached section of the tape at ∼100 m/s, which promotes the sound, so characteristic of this phenomenon.

In situ observations of crack formation in multi-filament Bi-2223 HTS tapes

DEFF Research Database (Denmark)

Sørensen, Bent F.; Horsewell, Andy; Skov-Hansen, P.

2002-01-01

High temperature superconducting tapes (BSCCO filaments embedded in Ag) were subjected to Uniaxial tension in an environmental scanning electron microscope, allowing in situ observation of cracking of the ceramic filaments. The first cracks were found to appear in the ceramic filaments at a strain...... around 0.15%, More cracks formed with increasing strain. The cracks covered the entire thickness of the filament. but did not Continue into the surrounding (ductile) Ag matrix. These 'tunnel cracks' appeared somewhat zigzag, indicating intergranular cracking mode. At low strains, crack blunting occurred...... at the ceramic/Ag interfaces of the tunnel cracks, At higher strain 'split cracks' formed at the tunnel cracks. The split cracks ran parallel with the ceramic/Ag interface just inside the ceramic layer....

Texture gradients in Fe-sheathed ex situ produced MgB2 tapes

International Nuclear Information System (INIS)

Lezza, P; Gladyshevskii, R; Abaecherli, V; Fluekiger, R

2006-01-01

Superconducting Fe-sheathed MgB 2 monofilamentary tapes have been fabricated by the powder-in-tube technique, varying the particle size of the starting MgB 2 powder and applying either cold or hot rolling during the last deformation process. Measurements of the critical current density J c with the magnetic field applied parallel or perpendicular to the tape surface revealed a pronounced anisotropy for the cold rolled tapes, which was found to increase with increasing particle size and magnetic field strength. The microstructural origin of the J c anisotropy was confirmed by means of x-ray diffraction performed on the filaments after mechanical removal of the sheath. The local texture was studied in a series of diffraction patterns collected at different distances from the filament centre, removing each time some 25 μm of the filament thickness. In the cold rolled tapes, the average orientation of the MgB 2 grains was found to approach a preferred orientation with the crystallographic c-axis perpendicular to the tape surface, near the interface with the sheath; however, the misalignment angle increased towards the centre of the tape. In the hot rolled tapes, for which no J c anisotropy was observed, the grains were found to be approximately randomly oriented. Roughness measurements performed on the side of the Fe sheath in contact with the MgB 2 filament are in agreement with the difference in texture observed for cold and hot rolled tapes

Digital signal processor for silicon audio playback devices; Silicon audio saisei kikiyo digital signal processor

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The digital audio signal processor (DSP) TC9446F series has been developed silicon audio playback devices with a memory medium of, e.g., flash memory, DVD players, and AV devices, e.g., TV sets. It corresponds to AAC (advanced audio coding) (2ch) and MP3 (MPEG1 Layer3), as the audio compressing techniques being used for transmitting music through an internet. It also corresponds to compressed types, e.g., Dolby Digital, DTS (digital theater system) and MPEG2 audio, being adopted for, e.g., DVDs. It can carry a built-in audio signal processing program, e.g., Dolby ProLogic, equalizer, sound field controlling, and 3D sound. TC9446XB has been lined up anew. It adopts an FBGA (fine pitch ball grid array) package for portable audio devices. (translated by NEDO)

A Social-Ecological View of Barriers and Facilitators for HIV Treatment Adherence: Interviews with Puerto Rican HIV Patients.

Directory of Open Access Journals (Sweden)

Eida M Castro

Full Text Available To identify perceived barriers and facilitators for HAART adherence among people living with HIV/AIDS in Southern Puerto Rico using a Social Ecological framework.Individual in-depths interviews were conducted with 12 HIV patients with a history of HAART non-adherence. Interviews were audio-taped and transcribed. Content analysis was performed for each transcribed interview by three independent coders using a codebook. Using Atlas TI, super-codes and families were generated to facilitate the categorization tree as well as grounded analyses and density estimates.Most participants reported a monthly income of $500 or less (n = 7, a high school education level (n = 7, being unemployed (n = 9 and being recipients of government health insurance (n = 11. Three out of six women reported living alone with their children and most men informed living with their parents or other relatives (n = 4. For the grounded analyses, the top four sub-categories linked to high number of quotations were mental health barriers (G = 32 followed by treatment regimen (G = 28, health system (G = 24 and interpersonal relations (G = 16. The top four sub-categories linked to high number of codes are treatment regimen (D = 4, health status perception (D = 3, interpersonal relations (D = 3 and health system (D = 3.The results of this study suggest the interconnection of HIV treatment adherence barriers at various system levels. Future studies on HIV treatment barriers should explore these interactions and investigate the possible synergistic effect on non-adherent behavior.

EFFECT OF KINESIO TAPE VERSUS ATHLETIC TAPE ON MYOELECTRIC ACTIVITY OF ANKLE MUSCLES IN PATIENTS WITH CHRONIC ANKLE SPRAIN

Directory of Open Access Journals (Sweden)

Asmaa F Abdelmonem

2018-04-01

Full Text Available Background: Sprained ankle a common orthopedic injury. The standard treatment for ankle sprains remains nonoperative. Ankle taping was used to protect and prevent ligaments excessive strain. So, the current study aimed at investigating the effect of spa-care Kinesio tape versus standard white athletic tape on myoelectric activities (EMG of ankle evertors (peroneus longus and invertors (tibialis anterior in a chronic ankle sprain. Methods: A convenient sample of 30 patients with a chronic ankle sprain (18 females and 12 males were included in this study. Their mean age ±SD was 24 ±1.2 years. Their height was 175±4.8 cm among men & 163±5.2 cm for females, and weight was 85±5.2 kg for males & 74±5.5 kg for women. It was a within-group design in which the same participant experienced the two types of taping compared to no taping condition. Root mean square (RMS was measured while participants were moving the isokinetic dynamometer at an angular velocity of 120°/sec using concentric contraction mode through full ankle range of motion. The EMG (RMS of evertors and invertors was measured immediately after the three taping ways (no tape, Kinesio tape, and athletic tape with a one-week interval between each taping. Results: Spa-care Kinesiotape significantly reduced evertors and invertors EMG (RMS compared with no tape or athletic tape in patients with chronic ankle sprain. Mean± SD of the evertors was 0.7 (±0.1 for no tape and 0.58 (±0.2 for Kinesio tape. The P value was 0.000 for kinesio tape in evertors compared with no tape. Also, mean± SD of the invertors was 0.87 (±0.23 for no tape, and 0.54 (±0.1 for Kinesio tape and the P value was 0.001 for Kinesio tape in invertors compared with no tape. Conclusion: Spa-care Kinesio tape may be useful for reducing EMG activity of ankle muscles in a chronic ankle sprain.

Flow structure and heat transfer in a square duct fitted with dual/quadruple twisted-tapes: Influence of tape configuration

International Nuclear Information System (INIS)

Eiamsa-ard, S.; Changcharoen, W.

2015-01-01

Numerical predictions reported of thermohydraulic characteristics of square ducts equipped with dual and quadruple twisted tapes (DTs and QTs) with different configurations. The studied cases include (1) dual co-tapes (Co-DTs), (2) dual counter-tapes (C-DTs), (3) diagonal dual counter-tapes (C-DDTs), (4) diagonal dual co-tapes (Co-DDTs), (5) quadruple co-tapes (Co-QTs), (6) quadruple counter tapes (CC-QTs) and (7) quadruple counter-tapes (PC-QTs). The results of these cases are compared with those of a smooth duct (a duct without tape insert) and also the one with a single tape (ST). The prediction involves using the RNG k-ε turbulent model under constant wall heat flux condition in the turbulent flow regime for the Reynolds number ranging from 6000 to 14000. The prediction indicates that thermohydraulic characteristics in ducts with twisted tape are strongly dependent on number and configuration of tapes. However, the influence of tape number is more significant than that of tape configuration. Heat transfer and friction increase as tape number increases. QTs offer superior heat transfer to DTs but their thermal performance factors are lower. For the tape inserts determined, DTs with diagonal configuration (Co-DDTs and C-DDTs) is the best design as the tapes offer the best thermal performance. The highest thermal performance factors given by Co-DTs, Co-DDTs, C-DTs, C-DDTs, Co-QTs, PC-QTs and CC-QTs, are around 1.21, 1.35, 1.25, 1.38, 1.08, 1.18, and 1.22, respectively

Barriers to and Facilitators of Antiretroviral Therapy Adherence in Nepal: A Qualitative Study

OpenAIRE

Wasti, Sharada P.; Simkhada, Padam; Randall, Julian; Freeman, Jennifer V; van Teijlingen, Edwin

2012-01-01

Patient's adherence is crucial to get the best out of antiretroviral therapy (ART). This study explores in-depth the barriers to and facilitators of ART adherence among Nepalese patients and service providers prescribing ART. Face-to-face semi-structured interviews were conducted with 34 participants. Interviews were audio-taped, transcribed, and translated into English before being analyzed thematically. ART-prescribed patients described a range of barriers for failing to adhere to ART. Fina...

Balancing Patient Care and Student Education: Learning to Deliver Bad News in an Optometry Teaching Clinic

Science.gov (United States)

Spafford, Marlee M.; Schryer, Catherine F.; Creutz, Stefan

2009-01-01

Learning to counsel patients in a teaching clinic or hospital occurs in the presence of the competing agendas of patient care and student education. We wondered about the challenges that these tensions create for clinical novices learning to deliver bad news to patients. In this preliminary study, we audio-taped and transcribed the interviews of…

The Influence of Argumentation on Understanding Nature of Science

Science.gov (United States)

Boran, Gül Hanim; Bag, Hüseyin

2016-01-01

The aim in conducting this study is to explore the effects of argumentation on pre-service science teachers' views of the nature of science. This study used a qualitative case study and conducted with 20 pre-service science teachers. Data sources include an open-ended questionnaire and audio-taped interviews. According to pretest and posttest…

Primary care nurses' performance in motivational interviewing: a quantitative descriptive study.

Science.gov (United States)

Östlund, Ann-Sofi; Kristofferzon, Marja-Leena; Häggström, Elisabeth; Wadensten, Barbro

2015-07-25

Motivational interviewing is a collaborative conversational style intended to strengthen motivation to change. It has been shown to be effective in addressing many different lifestyle problems as well as in chronic disease management, and many disease prevention guidelines promote use of motivational interviewing. The aim of the present study was twofold: to assess to what extent the primary care nurses in the study perform motivational interviewing according to the Motivational Interviewing Treatment Integrity Code and to investigate how the participating primary care nurses rated their own performance in motivational interviewing. The study was based on twelve primary care nurses' audio-recorded motivational interviewing sessions with patients (total 32 sessions). After each session, the nurses completed a questionnaire regarding their experience of their own performance in motivational interviewing. The audio-recorded sessions were analyzed using Motivational Interviewing Integrity Code 3.1.1. None of the nurses achieved beginning proficiency in all parts of any motivational interviewing sessions and two nurses did not achieve beginning proficiency in any parts or sessions. Making more complex than simple reflections was the specific verbal behavior/summary score that most nurses achieved. Beginning proficiency/competency in "percent open questions" was the summary score that fewest achieved. Primary care nurses did not achieve beginning proficiency/competency in all aspects of motivational interviewing in their recorded sessions with patients, where lifestyle change was discussed. This indicates a need for improvement and thus additional training, feedback and supervision in clinical practice with motivational interviewing.

Digital tape unit test facility software

Science.gov (United States)

Jackson, J. T.

1971-01-01

Two computer programs are described which are used for the collection and analysis of data from the digital tape unit test facility (DTUTF). The data are the recorded results of skew tests made on magnetic digital tapes which are used on computers as input/output media. The results of each tape test are keypunched onto an 80 column computer card. The format of the card is checked and the card image is stored on a master summary tape via the DTUTF card checking and tape updating system. The master summary tape containing the results of all the tape tests is then used for analysis as input to the DTUTF histogram generating system which produces a histogram of skew vs. date for selected data, followed by some statistical analysis of the data.

Categorizing Video Game Audio

DEFF Research Database (Denmark)

Westerberg, Andreas Rytter; Schoenau-Fog, Henrik

2015-01-01

they can use audio in video games. The conclusion of this study is that the current models' view of the diegetic spaces, used to categorize video game audio, is not t to categorize all sounds. This can however possibly be changed though a rethinking of how the player interprets audio.......This paper dives into the subject of video game audio and how it can be categorized in order to deliver a message to a player in the most precise way. A new categorization, with a new take on the diegetic spaces, can be used a tool of inspiration for sound- and game-designers to rethink how...

Tape write-efficiency improvements in CASTOR

International Nuclear Information System (INIS)

Murray, S; Bahyl, V; Cancio, G; Cano, E; Lo Presti, G; Lo Re, G; Ponce, S; Kotlyar, V

2012-01-01

The CERN Advanced STORage manager (CASTOR) is used to archive to tape the physics data of past and present physics experiments. For reasons of physical storage space, all of the tape resident data in CASTOR are repacked onto higher density tapes approximately every two years. Improving the performance of writing files smaller than 2GB to tape is essential in order to keep the time needed to repack all of the tape resident data within a period of no more than 1 year. This paper reports on the solution to writing efficiently to tape that is currently in its early deployment phases at CERN.

High-Fidelity Piezoelectric Audio Device

Science.gov (United States)

Woodward, Stanley E.; Fox, Robert L.; Bryant, Robert G.

2003-01-01

ModalMax is a very innovative means of harnessing the vibration of a piezoelectric actuator to produce an energy efficient low-profile device with high-bandwidth high-fidelity audio response. The piezoelectric audio device outperforms many commercially available speakers made using speaker cones. The piezoelectric device weighs substantially less (4 g) than the speaker cones which use magnets (10 g). ModalMax devices have extreme fabrication simplicity. The entire audio device is fabricated by lamination. The simplicity of the design lends itself to lower cost. The piezoelectric audio device can be used without its acoustic chambers and thereby resulting in a very low thickness of 0.023 in. (0.58 mm). The piezoelectric audio device can be completely encapsulated, which makes it very attractive for use in wet environments. Encapsulation does not significantly alter the audio response. Its small size (see Figure 1) is applicable to many consumer electronic products, such as pagers, portable radios, headphones, laptop computers, computer monitors, toys, and electronic games. The audio device can also be used in automobile or aircraft sound systems.

An Interactive Concert Program Based on Infrared Watermark and Audio Synthesis

Science.gov (United States)

Wang, Hsi-Chun; Lee, Wen-Pin Hope; Liang, Feng-Ju

The objective of this research is to propose a video/audio system which allows the user to listen the typical music notes in the concert program under infrared detection. The system synthesizes audio with different pitches and tempi in accordance with the encoded data in a 2-D barcode embedded in the infrared watermark. The digital halftoning technique has been used to fabricate the infrared watermark composed of halftone dots by both amplitude modulation (AM) and frequency modulation (FM). The results show that this interactive system successfully recognizes the barcode and synthesizes audio under infrared detection of a concert program which is also valid for human observation of the contents. This interactive video/audio system has greatly expanded the capability of the printout paper to audio display and also has many potential value-added applications.

Paper Punch Tape

CERN Multimedia

Physicists coded and recorded their programs through series of holes on punch paper tape or on punched cards. It was popular in the 1970s due to its high throughput speed and low cost, paper tape was one of the original data storage methods for computers. Information was encoded in the distinct pattern of holes punched in the paper; the paper itself was oiled to facilitate being run through the reading mechanism and to prevent tears due to brittleness. Though the paper was cheap, it had low storage capacity (only a few dozen kilobytes per roll) and the machinery involved in punching the holes was quite expensive. Higher capacity alternatives, such as magnetic tape, has get developped.

Award of two contracts for the renting of magnetic tape drives and tape libraries for LHC data storage and the purchase of the associated tape cartridges

CERN Document Server

2005-01-01

This document concerns the award of two contracts for the renting and possible subsequent purchase of magnetic tape drives and tape libraries for LHC data storage. The Finance Committee is invited to agree to the procedure described in section 3 of this document for the evaluation and possible subsequent purchase of tape drives and tape libraries for the storage of data from the LHC experiments. Subject to approval of this procedure, the Finance Committee is further invited to approve the negotiation of a contract for the renting of tape drives and tape libraries for evaluation purposes from IBM, for an amount of 579 707 Swiss francs, and from StorageTek, for an amount of 472 297 Swiss francs, during the period January 2006 â?" March 2007, plus the purchase of the associated tape cartridges for amounts of 202 500 Swiss francs and 284 748 Swiss francs respectively. The Finance Committee will be informed of the results of the evaluation by the end of 2006 and, subject to the outcome, will be invited to approve...

Effects of Kinesio Taping versus McConnell Taping for Patellofemoral Pain Syndrome: A Systematic Review and Meta-Analysis

Directory of Open Access Journals (Sweden)

Wen-Dien Chang

2015-01-01

Full Text Available Objectives. To conduct a systematic review comparing the effects of Kinesio taping with McConnell taping as a method of conservative management of patients with patellofemoral pain syndrome (PFPS. Methods. MEDLINE, PUBMED, EMBASE, AMED, and the Cochrane Central Register of Control Trials electronic databases were searched through July 2014. Controlled studies evaluating the effects of Kinesio or McConnell taping in PFPS patients were retrieved. Results. Ninety-one articles were selected from the articles that were retrieved from the databases, and 11 articles were included in the analysis. The methods, evaluations, and results of the articles were collected, and the outcomes of patellar tapings were analyzed. Kinesio taping can reduce pain and increase the muscular flexibility of PFPS patients, and McConnell taping also had effect in pain relief and patellar alignment. Meta-analysis showed small effect in pain reduction and motor function improvement and moderate effect in muscle activity change among PFPS patients using Kinesio taping. Conclusions. Kinesio taping technique used for muscles can relieve pain but cannot change patellar alignment, unlike McConnell taping. Both patellar tapings are used differently for PFPS patients and substantially improve muscle activity, motor function, and quality of life.

Sister Mary Theresa Brentano, OSB's Innovative Use of Magnetic Audio Tapes: An Overlooked Story in the History of Educational Technology.

Science.gov (United States)

Herndon, Linda

This paper tells the story of Sister Mary Theresa Brentano, O.S.B's (1902-1987) innovative use of magnetic audiotapes to provide instruction for students in grades K-12. From 1952 to approximately 1968, Brentano implemented, refined, and tested her tape teaching methods with special emphasis on individualizing instruction in the elementary school.…

A COMPARITIVE STUDY ON EFFECTIVENESS OF TAPING WITH IONTOPHORESIS AND TAPING ALONE IN CHRONIC PLANTAR FASCITIS

Directory of Open Access Journals (Sweden)

Biju Chetri

2016-04-01

Full Text Available Background: Plantar fasciitis is a painful condition caused by microtrauma to plantar fascia due to overuse. It is a most common cause of heel pain in runners. Various studies proved taping and Iontophoresis as effective in the treating plantar fasciitis. But there are no studies comparing the combined effect of iontophoresis with taping and taping alone in the treatment of plantar fasciitis. Methods: 50 patients suffering from plantar fasciitis who met the inclusion criteria were selected. The subjects were randomly divided into two groups i.e. Group A and Group B. Group A received taping, iontophoresis with plantar fascia stretching. Group B received taping and plantar fascia stretching. A total of 6 treatment sessions were given on alternate days over a period of two weeks for both the groups. Results: VAS and FFI scores across baseline and post intervention showed a significant improvement statistically in their mean scores between Groups A and B (P<0.05. Between group comparison of VAS and FFI scores, it showed that subject treated with Iontophoresis in combination with taping and plantar fascia stretch (Group A had significant improvement in VAS and functional ability when compared to subjects treated with taping and plantar fascia stretching alone (Group B. Conclusion: Iontophoresis along with Taping and plantar fascia stretching gave an additional benefit when compared with Taping and plantar fascia stretching alone in reducing pain and improving function in plantar fasciitis.

A Joint Audio-Visual Approach to Audio Localization

DEFF Research Database (Denmark)

Jensen, Jesper Rindom; Christensen, Mads Græsbøll

2015-01-01

Localization of audio sources is an important research problem, e.g., to facilitate noise reduction. In the recent years, the problem has been tackled using distributed microphone arrays (DMA). A common approach is to apply direction-of-arrival (DOA) estimation on each array (denoted as nodes), a...... time-of-flight cameras. Moreover, we propose an optimal method for weighting such DOA and range information for audio localization. Our experiments on both synthetic and real data show that there is a clear, potential advantage of using the joint audiovisual localization framework....

Modeling Audio Fingerprints : Structure, Distortion, Capacity

NARCIS (Netherlands)

Doets, P.J.O.

2010-01-01

An audio fingerprint is a compact low-level representation of a multimedia signal. An audio fingerprint can be used to identify audio files or fragments in a reliable way. The use of audio fingerprints for identification consists of two phases. In the enrollment phase known content is fingerprinted,

The Improvement of Students’ Leadership Ethic in Studying History by Using Baratayuda Audio Visual Media

Directory of Open Access Journals (Sweden)

Wendhy Rachmadhany

2018-04-01

Full Text Available The purpose of this research is to know the improvement of students’ leadership ethic in studying History after the implementation of Baratayuda Audio Visual Media. The population of this research is XI-Social Science-1 Class of SMAN 1 Pare, Kediri Regency, in academic year 2016/2017, consisted of 39 students. This Classroom Action Research (CAR is arranged by Pre-test, Cycle-1 and Cycle-2 which consisted by some steps, such like; planning, implementation, observation, and reflection. Collecting the data is by using questionnaire of leadership ethic, interview, and documentation. The method of data analysis in this research is descriptive analysis by comparing the improvement from one cycle to another. The result of the research is showing that: There is an improvement of leadership ethic in studying History after the implementation of Baratayuda Audio Visual media. It is shown by the results as follows; Pre-test indicates that the passing score is about 17, 95%. On Cycle-1 indicates 46, 1% and on Cycle-2 indicates a significant improvement about 71, 83%.

Introduction to audio analysis a MATLAB approach

CERN Document Server

Giannakopoulos, Theodoros

2014-01-01

Introduction to Audio Analysis serves as a standalone introduction to audio analysis, providing theoretical background to many state-of-the-art techniques. It covers the essential theory necessary to develop audio engineering applications, but also uses programming techniques, notably MATLAB®, to take a more applied approach to the topic. Basic theory and reproducible experiments are combined to demonstrate theoretical concepts from a practical point of view and provide a solid foundation in the field of audio analysis. Audio feature extraction, audio classification, audio segmentation, au

Observation of very low frequency emissions at Indian Antarctic ...

Indian Academy of Sciences (India)

Recently, we have succeeded in recording VLF emissions at the Indian Antarctic station, Maitri (geom. lat. 62° S, geom. long. 57.23°E, =4.5) using a T-type antenna, pre/main amplifiers and digital audio tape recorder. VLF hiss in the frequency ranges 11–13 kHz and 13–14.5 kHz and some riser-type emissions in the ...

Advances in audio source seperation and multisource audio content retrieval

Science.gov (United States)

Vincent, Emmanuel

2012-06-01

Audio source separation aims to extract the signals of individual sound sources from a given recording. In this paper, we review three recent advances which improve the robustness of source separation in real-world challenging scenarios and enable its use for multisource content retrieval tasks, such as automatic speech recognition (ASR) or acoustic event detection (AED) in noisy environments. We present a Flexible Audio Source Separation Toolkit (FASST) and discuss its advantages compared to earlier approaches such as independent component analysis (ICA) and sparse component analysis (SCA). We explain how cues as diverse as harmonicity, spectral envelope, temporal fine structure or spatial location can be jointly exploited by this toolkit. We subsequently present the uncertainty decoding (UD) framework for the integration of audio source separation and audio content retrieval. We show how the uncertainty about the separated source signals can be accurately estimated and propagated to the features. Finally, we explain how this uncertainty can be efficiently exploited by a classifier, both at the training and the decoding stage. We illustrate the resulting performance improvements in terms of speech separation quality and speaker recognition accuracy.

An Interview About Hunting a Black Bear

OpenAIRE

G.yu lha

2009-01-01

The respondent describes the first time he killed a black bear while hunting. The fifty one audio and nine video files in this collection include: villages’ life stories, circle-dancing songs and performance, local history, folk tales, and interviews from Siyuewu Village, Puxi Township, Rangtang County, Aba Tibetan and Qiang Autonomous Prefecture, Sichuan Province, China. World Oral Literature Project

Audio computer-assisted survey instrument versus face-to-face interviews: optimal method for detecting high-risk behaviour in pregnant women and their sexual partners in the south of Brazil.

Science.gov (United States)

Yeganeh, N; Dillavou, C; Simon, M; Gorbach, P; Santos, B; Fonseca, R; Saraiva, J; Melo, M; Nielsen-Saines, K

2013-04-01

Audio computer-assisted survey instrument (ACASI) has been shown to decrease under-reporting of socially undesirable behaviours, but has not been evaluated in pregnant women at risk of HIV acquisition in Brazil. We assigned HIV-negative pregnant women receiving routine antenatal care at in Porto Alegre, Brazil and their partners to receive a survey regarding high-risk sexual behaviours and drug use via ACASI (n = 372) or face-to-face (FTF) (n = 283) interviews. Logistic regression showed that compared with FTF, pregnant women interviewed via ACASI were significantly more likely to self-report themselves as single (14% versus 6%), having >5 sexual partners (35% versus 29%), having oral sex (42% versus 35%), using intravenous drugs (5% versus 0), smoking cigarettes (23% versus 16%), drinking alcohol (13% versus 8%) and using condoms during pregnancy (32% versus 17%). Therefore, ACASI may be a useful method in assessing risk behaviours in pregnant women, especially in relation to drug and alcohol use.

Ankle inversion taping using kinesiology tape for treating medial ankle sprain in an amateur soccer player

OpenAIRE

Lee, Sun-Min; Lee, Jung-Hoon

2015-01-01

[Purpose] The purpose of this study was to report the effects of ankle inversion taping using kinesiology tape in a patient with a medial ankle sprain. [Subject] A 28-year-old amateur soccer player suffered a Grade 2 medial ankle sprain during a match. [Methods] Ankle inversion taping was applied to the sprained ankle every day for 2 months. [Results] His symptoms were reduced after ankle inversion taping application for 2 months. The self-reported function score, the reach distances in the S...

The effect of kinesio taping in forward bending of the lumbar spine.

Science.gov (United States)

Lemos, Thiago Vilela; Albino, Anna Carolina Gonçalves; Matheus, Joao Paulo C; Barbosa, Aurélio de Melo

2014-09-01

[Purpose] The aim of this study was to evaluate the influence of a lumbar fascia Kinesio Taping(®) technique forward bending range of motion. [Subjects and Methods] This was a longitudinal study with a randomized clinical trial composed of 39 subjects divided into three groups (control, Kinesio Without Tension-KWT, and Kinesio Fascia Correction-KFC). The subjects were assessed by Schober and fingertip-to-floor tests and left the tape in place for 48 hours before being reassessed 24 hours, 48 hours and 30 days after its removal. [Results] In all three experimental groups no significant differences were observed with the Schober test, but it was possible to observe an increase in lumbar flexion after 30 days. With the fingertip-to-floor distance assessment, the KFC and KWT groups showed significantly improved flexibility 24 hours and 48 hours after tape removal. [Conclusion] The Kinesio Taping(®) influenced fascia mobility, allowing for slight improvement of lumbar flexibility.

A conceptual framework for audio-visual museum media

DEFF Research Database (Denmark)

Kirkedahl Lysholm Nielsen, Mikkel

2017-01-01

In today's history museums, the past is communicated through many other means than original artefacts. This interdisciplinary and theoretical article suggests a new approach to studying the use of audio-visual media, such as film, video and related media types, in a museum context. The centre...... and museum studies, existing case studies, and real life observations, the suggested framework instead stress particular characteristics of contextual use of audio-visual media in history museums, such as authenticity, virtuality, interativity, social context and spatial attributes of the communication...

Dynamic response of HTS composite tapes to pulsed currents

International Nuclear Information System (INIS)

Meerovich, V; Sokolovsky, V; Prigozhin, L; Rozman, D

2006-01-01

Dynamic voltage-current characteristics of an HTS Ag/BiSCCO composite tape are studied both experimentally and theoretically. The tape is subjected to pulsed currents with different shapes and magnitudes and voltage traces are measured using the four-point method with different locations of potential taps on the sample surface. Clockwise and anticlockwise hysteresis loops are obtained for the same sample depending on the location of the potential taps. The dynamic characteristics deviate substantially from the DC characteristic, especially in the range of low voltages where a criterion for the critical current value is usually chosen (1-10 μV cm -1 ). The critical current determined from dynamic characteristics and its change with the pulse magnitude depend on the location of the potential taps and on the curve branch chosen for the critical current determination (ascending or descending). The theoretical analysis is based on a model of the magnetic flux diffusion into a composite tape for a superconductor described by the flux creep characteristic. Numerical simulation based on this model gives results in good agreement with the experimental ones and explains the observed peculiarities of the dynamic characteristics of HTS composite tapes. The difference between the magnetic diffusion into a tape and a slab is discussed

Properties of PTFE tape as a semipermeable membrane in fluorous reactions

Directory of Open Access Journals (Sweden)

Brendon A. Parsons

2015-06-01

Full Text Available In a PTFE tape phase-vanishing reaction (PV-PTFE, a delivery tube sealed with PTFE tape is inserted into a vessel which contains the substrate. The reagent diffuses across the PTFE tape barrier into the reaction vessel. PTFE co-polymer films have been found to exhibit selective permeability towards organic compounds, which was affected by the presence of solvents. In this study, we attempted to establish general trends of permeability of PTFE tape to different compounds and to better describe the process of solvent transport in PV-PTFE bromination reactions. Though PTFE tape has been reported as impermeable to some compounds, such as dimethyl phthalate, solvent adsorption to the tape altered its permeability and allowed diffusion through channels of solvent within the PTFE tape. In this case, the solvent-filled pores of the PTFE tape are chemically more akin to the adsorbed solvent rather than to the PTFE fluorous structure. The solvent uptake effect, which was frequently observed in the course of PV-PTFE reactions, can be related to the surface tension of the solvent and the polarity of the solvent relative to the reagent. The lack of pores in bulk PTFE prevents solvents from altering its permeability and, therefore, bulk PTFE is impermeable to most solvents and reagents. However, bromine, which is soluble in liquid fluorous media, diffused through the bulk PTFE. A better understanding of the PTFE phase barrier will make it possible to further optimize the PV-PTFE reaction design.

Effect of kinesio-taping on ankle joint stability

Directory of Open Access Journals (Sweden)

Mervat A. Mohamed

2016-05-01

Full Text Available Ankle Instability is characterized by recurrent giving way and often develops after repeated lateral ankle sprains. Kinesiotape is more elastic than traditional athletic tape and is becoming increasingly popular. It is reported to decrease pain, improve muscle function, circulation and proprioception, however, research examining the effects of Kinesiotape in ankle instability is limited. The objective of this study was to determine if applying Kinesiotape to unstable ankle may improve performance in the Star Excursion Balance Test (SEBT, which has been shown to be a sensitive and reliable measure for quantifying dynamic balance. Thirty subjects with first degree ankle sprain were participated in this study. SEBT was used to test the subject dynamic balance under three conditions; without taping, with white athletic tape and with kinesiotape. One way repeated measure ANOVA using Greenhouse-Geisser corrections were conducted to evaluate differences in SEBT for the three conditions. Pairwise comparison of the outcome measures in the three occasions (without taping, with athletic taping, and with kinesio taping revealed statistically significant differences of all outcomes between occasion 1 (without taping and occasion 2 (with athletic taping favoring the athletic taping (p < 0.05. Also, a statistically significant difference between occasion 1 (without taping and occasion 3 (with kinesio taping were found (p < 0.05 favoring kinesio taping. Moreover, pairwise comparison of the ankle stability outcomes using athletic taping versus kinesio taping indicated a statistically significant difference (p < 0.05 in favor of kinesio taping measures. Conclusion: kinesiotape has superior effect than athletic tape in patients with first degree ankle sprain and can be used safely for improving ankle joint stability.

Properties of hot pressed MgB2/Ti tapes

International Nuclear Information System (INIS)

Kovac, P.; Husek, I.; Melisek, T.; Fedor, J.; Cambel, V.; Morawski, A.; Kario, A.

2009-01-01

Hot axial and hot isostatic pressing was applied for single-core MgB 2 /Ti tapes. Differences in transport current density, n-exponents and critical current anisotropy are discussed and related to the grain connectivity influenced by pressing. The magnetic Hall probe scanning measurements allowed observing the isolated regions for axially hot pressed sample attributed to the longitudinally oriented cracks introduced by pressing. The highest current densities were measured for the tape subjected to hot isostatic pressing due to improved connectivity.

The neutron beam users tape management system

International Nuclear Information System (INIS)

Lyall, B.; Johnson, M.W.

1977-02-01

Systems are described for dealing with data collected at the High Flux Reactor, Institut Laue-Langevin, Grenoble and brought on magnetic tape to the Neutron Beam Research Unit at the Rutherford Laboratory. The first system, named GNAT, was designed to archive the incoming 800 bpi tapes onto 6250 bpi tapes (to enable them to return to the ILL). The archiving program, besides choosing the archive tapes, keeping a record of the data sets archived, and writing the archive tape, should be able to cope with incoming tapes whose formats are somewhat different from the standard IBM format. The second system, named FONT, was designed to maintain a record of all the tapes in the NBRU's possession, their whereabouts and what data, if any, are on them. (U.K.)

Tape Storage and CRC Protection

CERN Document Server

Ha, Karel

2014-01-01

Over 100 Petabytes of data is stored on several kind of physical support, namely disks and tapes. Data on any physical support or traveling on a data link (network, fibre channel...) can be subject to silent data corruption. A possible improvement is introducing end-to-end data integrity from the filesystem down to the tape layer. For the tape back-end it can be done by using Logical Block Protection, which computes and compares CRC checksum of every single block of data. During my work, I improved on-the-fly CRC calculation for the tape storage system, which was achieved by introducing a multithreaded implementation - a technique applicable to arbitrary CRC algorithm. Finally, I per...

Interviews within experimental frameworks

DEFF Research Database (Denmark)

Reinhard, CarrieLynn D.

2010-01-01

, an amount of control was required over the nature of those experiences.  With these requirements, a hybrid study was designed by deconstructing the conceptualization of "the experiment" and utilizing both quantitative and qualitative methods.  The resulting study involved the following: a within......-subjects experimental design served as the framework for the study, while in-depth qualitative interviews were employed alongside surveys and audio and video recording as the data collection methods.  Data collection occurred while participants were engaging with the media products, via talk aloud protocols......, and afterwards when they were asked to recall and compare these situations in open-ended questionnaires and interviews structured using Dervin's Sense-Making Methodology.  Having completed the study using this mixed method(ology) approach, I discuss the effectiveness of this approach, and where the approach...

Could Audio-Described Films Benefit from Audio Introductions? An Audience Response Study

Science.gov (United States)

Romero-Fresco, Pablo; Fryer, Louise

2013-01-01

Introduction: Time constraints limit the quantity and type of information conveyed in audio description (AD) for films, in particular the cinematic aspects. Inspired by introductory notes for theatre AD, this study developed audio introductions (AIs) for "Slumdog Millionaire" and "Man on Wire." Each AI comprised 10 minutes of…

A Method to Detect AAC Audio Forgery

Directory of Open Access Journals (Sweden)

Qingzhong Liu

2015-08-01

Full Text Available Advanced Audio Coding (AAC, a standardized lossy compression scheme for digital audio, which was designed to be the successor of the MP3 format, generally achieves better sound quality than MP3 at similar bit rates. While AAC is also the default or standard audio format for many devices and AAC audio files may be presented as important digital evidences, the authentication of the audio files is highly needed but relatively missing. In this paper, we propose a scheme to expose tampered AAC audio streams that are encoded at the same encoding bit-rate. Specifically, we design a shift-recompression based method to retrieve the differential features between the re-encoded audio stream at each shifting and original audio stream, learning classifier is employed to recognize different patterns of differential features of the doctored forgery files and original (untouched audio files. Experimental results show that our approach is very promising and effective to detect the forgery of the same encoding bit-rate on AAC audio streams. Our study also shows that shift recompression-based differential analysis is very effective for detection of the MP3 forgery at the same bit rate.

Audio Visual Media Components in Educational Game for Elementary Students

Directory of Open Access Journals (Sweden)

Meilani Hartono

2016-12-01

Full Text Available The purpose of this research was to review and implement interactive audio visual media used in an educational game to improve elementary students’ interest in learning mathematics. The game was developed for desktop platform. The art of the game was set as 2D cartoon art with animation and audio in order to make students more interest. There were four mini games developed based on the researches on mathematics study. Development method used was Multimedia Development Life Cycle (MDLC that consists of requirement, design, development, testing, and implementation phase. Data collection methods used are questionnaire, literature study, and interview. The conclusion is elementary students interest with educational game that has fun and active (moving objects, with fast tempo of music, and carefree color like blue. This educational game is hoped to be an alternative teaching tool combined with conventional teaching method.

Age-of-Air, Tape Recorder, and Vertical Transport Schemes

Science.gov (United States)

Lin, S.-J.; Einaudi, Franco (Technical Monitor)

2000-01-01

A numerical-analytic investigation of the impacts of vertical transport schemes on the model simulated age-of-air and the so-called 'tape recorder' will be presented using an idealized 1-D column transport model as well as a more realistic 3-D dynamical model. By comparing to the 'exact' solutions of 'age-of-air' and the 'tape recorder' obtainable in the 1-D setting, useful insight is gained on the impacts of numerical diffusion and dispersion of numerical schemes used in global models. Advantages and disadvantages of Eulerian, semi-Lagrangian, and Lagrangian transport schemes will be discussed. Vertical resolution requirement for numerical schemes as well as observing systems for capturing the fine details of the 'tape recorder' or any upward propagating wave-like structures can potentially be derived from the 1-D analytic model.

Location audio simplified capturing your audio and your audience

CERN Document Server

Miles, Dean

2014-01-01

From the basics of using camera, handheld, lavalier, and shotgun microphones to camera calibration and mixer set-ups, Location Audio Simplified unlocks the secrets to clean and clear broadcast quality audio no matter what challenges you face. Author Dean Miles applies his twenty-plus years of experience as a professional location operator to teach the skills, techniques, tips, and secrets needed to produce high-quality production sound on location. Humorous and thoroughly practical, the book covers a wide array of topics, such as:* location selection* field mixing* boo

New developments for the investigation of hard X-rays emitted by peeling adhesive tapes.

Science.gov (United States)

Krämer, D; Lützenkirchen-Hecht, D; Lühmann, B; Keite-Telgenbüscher, K; Frahm, R

2013-05-01

We realized an advanced apparatus for the investigation of emitted X-rays produced by peeling adhesive tape rolls under vacuum conditions. Two stepper motors can unwind and rewind a tape roll, and an additional roller with an optical encoder provides measurement and control of the tape speed. This way reproducible and consecutive experiments are feasible without having to change the tape or break the vacuum. The dependence of the X-ray emission on tape speed, gas pressure, type of adhesive tape, and detector angle has been investigated. The resulting spectra are continuous and span an X-ray energy range of typically 2-60 keV with high intensity. Furthermore, the new apparatus allows the in situ metalization of adhesive tape rolls by a gold sputter source. A significantly increased X-ray emission was observed for adhesive tapes with a metal coating. Thin metal foils have been placed between the tape and the detector, different K- and L-absorption edges could be measured. A considerable enhancement of the emission was achieved under the influence of the magnetic field of an NdFeB permanent magnet.

MARITAL RELATIONSHIP AND EXPECTATIONS ABOUT PARENTHOOD IN GAY COUPLES

OpenAIRE

Meletti, Alexandre Trevisani; Scorsolini-Comin, Fabio

2015-01-01

The aim of this study was to understand the processes of construction of the marital relationship and expectations about parenthood in same-sex couples. It has been interviewed four gay couples (four men and four women) who have been living together for four years, on average. Semi-structured interviews have been used and the technique of the life history has been also performed in an individual appliance. They have also been audio taped, fully and literally transcribed. The content analysis ...

Smartphone audio port data collection cookbook

Directory of Open Access Journals (Sweden)

Kyle Forinash

2018-06-01

Full Text Available The audio port of a smartphone is designed to send and receive audio but can be harnessed for portable, economical, and accurate data collection from a variety of sources. While smartphones have internal sensors to measure a number of physical phenomena such as acceleration, magnetism and illumination levels, measurement of other phenomena such as voltage, external temperature, or accurate timing of moving objects are excluded. The audio port cannot be only employed to sense external phenomena. It has the additional advantage of timing precision; because audio is recorded or played at a controlled rate separated from other smartphone activities, timings based on audio can be highly accurate. The following outlines unpublished details of the audio port technical elements for data collection, a general data collection recipe and an example timing application for Android devices.

Analisis Perilaku Konsumen Proll Tape di Jember

OpenAIRE

Kusmiati, Ati; Widjayanti, Lenny; Risaldi, Feri

2009-01-01

Proll tape is a agroindustrial product which used agriculture product as a basic material. It is a diversification product from tape and mixed with some flavour. It can be found in the gift store. Proll tape marketing strategic will influence consumer behaviour in the decision buying. Consumer buy proll tape as a gift as beside on their own consumption. Consumer considers proll tape has a good quality so that it can fill consumer needed. Purpose of the research to find out the influence facto...

Structure Learning in Audio

DEFF Research Database (Denmark)

Nielsen, Andreas Brinch

By having information about the setting a user is in, a computer is able to make decisions proactively to facilitate tasks for the user. Two approaches are taken in this thesis to achieve more information about an audio environment. One approach is that of classifying audio, and a new approach...... investigated. A fast and computationally simple approach that compares recordings and classifies if they are from the same audio environment have been developed, and shows very high accuracy and the ability to synchronize recordings in the case of recording devices which are not connected. A more general model...

New Interview and Observation Measures of the Broader Autism Phenotype : Description of Strategy and Reliability Findings for the Interview Measures

NARCIS (Netherlands)

Parr, Jeremy R.; De Jonge, Maretha V.; Wallace, Simon; Pickles, Andrew; Rutter, Michael L.; Le Couteur, Ann S.; van Engeland, Herman; Wittemeyer, Kerstin; Mcconachie, Helen; Roge, Bernadette; Mantoulan, Carine; Pedersen, Lennart; Isager, Torben; Poustka, Fritz; Bolte, Sven; Bolton, Patrick; Weisblatt, Emma; Green, Jonathan; Papanikolaou, Katerina; Baird, Gillian; Bailey, Anthony J.

2015-01-01

Clinical genetic studies confirm the broader autism phenotype (BAP) in some relatives of individuals with autism, but there are few standardized assessment measures. We developed three BAP measures (informant interview, self-report interview, and impression of interviewee observational scale) and

A centralized audio presentation manager

Energy Technology Data Exchange (ETDEWEB)

Papp, A.L. III; Blattner, M.M.

1994-05-16

The centralized audio presentation manager addresses the problems which occur when multiple programs running simultaneously attempt to use the audio output of a computer system. Time dependence of sound means that certain auditory messages must be scheduled simultaneously, which can lead to perceptual problems due to psychoacoustic phenomena. Furthermore, the combination of speech and nonspeech audio is examined; each presents its own problems of perceptibility in an acoustic environment composed of multiple auditory streams. The centralized audio presentation manager receives abstract parameterized message requests from the currently running programs, and attempts to create and present a sonic representation in the most perceptible manner through the use of a theoretically and empirically designed rule set.

Instrumental Landing Using Audio Indication

Science.gov (United States)

Burlak, E. A.; Nabatchikov, A. M.; Korsun, O. N.

2018-02-01

The paper proposes an audio indication method for presenting to a pilot the information regarding the relative positions of an aircraft in the tasks of precision piloting. The implementation of the method is presented, the use of such parameters of audio signal as loudness, frequency and modulation are discussed. To confirm the operability of the audio indication channel the experiments using modern aircraft simulation facility were carried out. The simulated performed the instrument landing using the proposed audio method to indicate the aircraft deviations in relation to the slide path. The results proved compatible with the simulated instrumental landings using the traditional glidescope pointers. It inspires to develop the method in order to solve other precision piloting tasks.

Bit rates in audio source coding

NARCIS (Netherlands)

Veldhuis, Raymond N.J.

1992-01-01

The goal is to introduce and solve the audio coding optimization problem. Psychoacoustic results such as masking and excitation pattern models are combined with results from rate distortion theory to formulate the audio coding optimization problem. The solution of the audio optimization problem is a

Caught (Unfortunately) on Tape

Science.gov (United States)

Young, Jeffrey R.

2009-01-01

Recording class sessions so students can view them online is becoming routine on many campuses. But all that taping can lead to "uh-oh moments," such as when a professor's joke about the college dean ends up on YouTube, or a private comment to a student after class is inadvertently broadcast. Some lecture bloopers caught on tape are…

The inhomogeneities of (Pb,Bi)2223 superconducting tapes and their detection

International Nuclear Information System (INIS)

Leeuwen, S. van

1999-05-01

This thesis consists of two parts: first, the inhomogeneities that were observed in high temperature superconducting (Pb,Bi)2223 tapes were studied followed by the design of two rigs which were built to detect them. These investigations concentrated on (Pb,Bi)2223 phase high temperature superconducting tapes. Superconductors and their applications were briefly evaluated. It was found that high temperature superconductors have unique properties which cannot be duplicated by their counterparts. However, it was noted that there are significant improvements to be made before they can be commercially viable. An investigation was carried out into the variation of core density within cross sections and along lengths of (Pb,Bi)2223 tapes during fabrication. It was observed that rolling and thermal treatment brought about a non-uniform core density in both these aspects of tile tape. This was followed by an investigation into the effect of core density on the formation of the (Pb,Bi)2223 phase. It was shown that a high core density formed the (Pb,Bi)2223 phase at a slower rate than a lower core density under the thermal treatment. A high core density and a slow heating rate produced smaller 2212 grains at the end of the incubation period. Smaller 2212 grains were thought to be linked to the faster formation of the (Pb,B1)2223 phase. The highest Jc was from a high core density tape which had the smaller 2212 grains at the end of incubation period. Smaller 2212 grains were thought to aid a more homogeneous conversion to the (Pb,Bi)2223 phase. Alloy-sheathed (Pb,Bi)2223 superconducting tapes were produced in order to fabricate a more homogeneous core density. It was found that the alloy sheath (with an addition of 15% wt Ag in the precursor powder) changed the characteristics of the core in several ways: the formation of the (Pb,Bi)2223 phase was homogeneous across the thickness of the core, a smaller 2212 grain size was formed at the end of the incubation period and a higher

HTS Nested magnet wound with 12 mm GdBCO tape and 4.4 mm YBCO tape

International Nuclear Information System (INIS)

Kang, Myung Hun; Ku, Myung Hwan; Cha, Guee Soo; Lim, Hyoung Woo

2015-01-01

The properties of High Temperature Superconducting (HTS) tapes are progressing, as HTS tapes evolve from 1st generation to 2nd generation. This paper presents design and construction of a 2nd generation HTS magnet consisting of two nested GdBCO and YBCO pancake coils. Two HTS tapes of different widths were used to wind the HTS nested magnet. Considering that a higher magnetic field is applied to the inner magnet than to the outer magnet, 12 mm GdBCO tape was used for winding the inner magnet, which consisted of four single pancake windings. Eight double pancake windings wound with 4.4 mm YBCO tapes were used for the outer magnet. The test results show that the central magnetic field of the HTS nested magnet was 920 mT. The measured critical currents of the inner and outer magnet at 77K were 80.8 A and 32.6 A, respectively

Ever Since the World Began: A Reading & Interview with Masha Tupitsyn

OpenAIRE

Masha Tupitsyn

2013-01-01

Writer and cultural critic Masha Tupitsyn is interviewed on her audio recording of her reading Ever Since This World Began, produced specially for this issue of continent. and adapted from her recently published Love Dog (Success and Failure) out from Penny-Ante Editions.

Tape casting fluorinated YBC123

International Nuclear Information System (INIS)

Taylor, J.A.T.; Luke, D.M.; Whiteley, B.A.

1991-01-01

Tape casting the superconducting Ba-Y-Cu oxide was accomplished by several laboratories and show promise for being a versatile forming technique. The major problem is low current density, probably due to lack of grain alignment and grain boundary related weak links. The latter problem may be due to formation of carbonates and hydroxides during binder burnout. Preliminary work done at Alfred shows that a bimodal powder size distribution displays significant alignment after tape casting and that F treated powder is resistant to attack by steam at 100C. Such corrosion resistant powder cast as form tape should survive the binder burnout without the detrimental grain boundary phases that develop from reaction of the superconducting phase, steam and carbon dioxide. This paper presents the results of an investigation of tape casting fluorinated powder with a bimodal size distribution

Audio wiring guide how to wire the most popular audio and video connectors

CERN Document Server

Hechtman, John

2012-01-01

Whether you're a pro or an amateur, a musician or into multimedia, you can't afford to guess about audio wiring. The Audio Wiring Guide is a comprehensive, easy-to-use guide that explains exactly what you need to know. No matter the size of your wiring project or installation, this handy tool provides you with the essential information you need and the techniques to use it. Using The Audio Wiring Guide is like having an expert at your side. By following the clear, step-by-step directions, you can do professional-level work at a fraction of the cost.

Safety brake for tape reels

Science.gov (United States)

Carle, C. E.

1977-01-01

All-mechanical device senses end of tape and stops reel, even in event of electronic system failure. Assembly includes stop to prevent brake from overriding tape. Recentering mechanism returns brake to neutral position after torque is removed from reels.

Comparative evaluation of audio and audio - tactile methods to improve oral hygiene status of visually impaired school children

OpenAIRE

R Krishnakumar; Swarna Swathi Silla; Sugumaran K Durai; Mohan Govindarajan; Syed Shaheed Ahamed; Logeshwari Mathivanan

2016-01-01

Background: Visually impaired children are unable to maintain good oral hygiene, as their tactile abilities are often underdeveloped owing to their visual disturbances. Conventional brushing techniques are often poorly comprehended by these children and hence, it was decided to evaluate the effectiveness of audio and audio-tactile methods in improving the oral hygiene of these children. Objective: To evaluate and compare the effectiveness of audio and audio-tactile methods in improving oral h...

Teacher’s Voice on Metacognitive Strategy Based Instruction Using Audio Visual Aids for Listening

Directory of Open Access Journals (Sweden)

Salasiah Salasiah

2018-02-01

Full Text Available The paper primarily stresses on exploring the teacher’s voice toward the application of metacognitive strategy with audio-visual aid in improving listening comprehension. The metacognitive strategy model applied in the study was inspired from Vandergrift and Tafaghodtari (2010 instructional model. Thus it is modified in the procedure and applied with audio-visual aids for improving listening comprehension. The study’s setting was at SMA Negeri 2 Parepare, South Sulawesi Province, Indonesia. The population of the research was the teacher of English at tenth grade at SMAN 2. The sample was taken by using random sampling technique. The data was collected by using in depth interview during the research, recorded, and analyzed using qualitative analysis. This study explored the teacher’s response toward the modified model of metacognitive strategy with audio visual aids in class of listening which covers positive and negative response toward the strategy applied during the teaching of listening. The result of data showed that this strategy helped the teacher a lot in teaching listening comprehension as the procedure has systematic steps toward students’ listening comprehension. Also, it eases the teacher to teach listening by empowering audio visual aids such as video taken from youtube.

WLAN Technologies for Audio Delivery

Directory of Open Access Journals (Sweden)

Nicolas-Alexander Tatlas

2007-01-01

Full Text Available Audio delivery and reproduction for home or professional applications may greatly benefit from the adoption of digital wireless local area network (WLAN technologies. The most challenging aspect of such integration relates the synchronized and robust real-time streaming of multiple audio channels to multipoint receivers, for example, wireless active speakers. Here, it is shown that current WLAN solutions are susceptible to transmission errors. A detailed study of the IEEE802.11e protocol (currently under ratification is also presented and all relevant distortions are assessed via an analytical and experimental methodology. A novel synchronization scheme is also introduced, allowing optimized playback for multiple receivers. The perceptual audio performance is assessed for both stereo and 5-channel applications based on either PCM or compressed audio signals.

Silica frit formulation for low temperature co-fired ceramic tapes (LTCC)

International Nuclear Information System (INIS)

Nor Hayati Alias; Che Seman Mahmood

2006-01-01

Glassifier agents or so called fluxes could function to lower down the melting temperature of a ceramic material. Two types of silica based glass frits have been formulated to undergo vitrification at temperature lower than 1000 degree C. Frit A powder is composing of 11% Sodium Carbonate, 11% Calcium Oxide,15% Plumbum Oxide and 10% MgO while Frit B is composing of 12% Boron Oxide, 5% Ceria, 11% Sodium Carbonate and 2% Magnesium Oxide as glassifier agent in Silica powder. Two different ceramic slurries were made from a-alumina powder with addition of either Frit A or Frit B and also dispersant, binder and plasticizers, followed by casting into 0.04 mm thickness alumina green tapes. The tapes were then fired at temperature 1000 degree C to burn out plastic binder system and to vitrify the glass frits. Scanning Electron Microscopy (SEM)/EDX techniques were carried out to observe the changes in microstructure of the tape due to vitrication of glass frits. Comparisons were made with alumina green tapes without any glass frit component and with Commercial LTCC DuPont 951 tape. (Author)

Audio Frequency Analysis in Mobile Phones

Science.gov (United States)

Aguilar, Horacio Munguía

2016-01-01

A new experiment using mobile phones is proposed in which its audio frequency response is analyzed using the audio port for inputting external signal and getting a measurable output. This experiment shows how the limited audio bandwidth used in mobile telephony is the main cause of the poor speech quality in this service. A brief discussion is…

Development of Powder-in-Tube Processed Iron Pnictide Wires and Tapes

KAUST Repository

Ma, Yanwei

2011-06-01

The development of PIT fabrication process of iron pnictide superconducting wires and tapes has been reviewed. Silver was found to be the best sheath material, since no reaction layer was observed between the silver sheath and the superconducting core. The grain connectivity of iron pnictide wires and tapes has been markedly improved by employing Ag or Pb as dopants. At present, critical current densities in excess of 3750 A /cm 2 (I c = 37.5 A) at 4.2 K have been achieved in Ag-sheathed SrKFeAs wires prepared with the above techniques, which is the highest value obtained in iron-based wires and tapes so far. Moreover, Ag-sheathed Sm-1111 superconducting tapes were successfully prepared by PIT method at temperatures as low as ̃ 900 °C, instead of commonly used temperatures of ̃ 1200 °C. These results demonstrate the feasibility of producing superconducting pnictide composite wires, even grain boundary properties require much more attention. © 2010 IEEE.

[Intermodal timing cues for audio-visual speech recognition].

Science.gov (United States)

Hashimoto, Masahiro; Kumashiro, Masaharu

2004-06-01

The purpose of this study was to investigate the limitations of lip-reading advantages for Japanese young adults by desynchronizing visual and auditory information in speech. In the experiment, audio-visual speech stimuli were presented under the six test conditions: audio-alone, and audio-visually with either 0, 60, 120, 240 or 480 ms of audio delay. The stimuli were the video recordings of a face of a female Japanese speaking long and short Japanese sentences. The intelligibility of the audio-visual stimuli was measured as a function of audio delays in sixteen untrained young subjects. Speech intelligibility under the audio-delay condition of less than 120 ms was significantly better than that under the audio-alone condition. On the other hand, the delay of 120 ms corresponded to the mean mora duration measured for the audio stimuli. The results implied that audio delays of up to 120 ms would not disrupt lip-reading advantage, because visual and auditory information in speech seemed to be integrated on a syllabic time scale. Potential applications of this research include noisy workplace in which a worker must extract relevant speech from all the other competing noises.

A COMPARITIVE STUDY ON EFFECTIVENESS OF TAPING WITH IONTOPHORESIS AND TAPING ALONE IN CHRONIC PLANTAR FASCITIS

OpenAIRE

Biju Chetri, U.T. Ifthikar Ali, Madhusmita Koch, Abhijit Dutta

2016-01-01

Background: Plantar fasciitis is a painful condition caused by microtrauma to plantar fascia due to overuse. It is a most common cause of heel pain in runners. Various studies proved taping and Iontophoresis as effective in the treating plantar fasciitis. But there are no studies comparing the combined effect of iontophoresis with taping and taping alone in the treatment of plantar fasciitis. Methods: 50 patients suffering from plantar fasciitis who met the inclusion criteria were selected...

Presence and the utility of audio spatialization

DEFF Research Database (Denmark)

Bormann, Karsten

2005-01-01

The primary concern of this paper is whether the utility of audio spatialization, as opposed to the fidelity of audio spatialization, impacts presence. An experiment is reported that investigates the presence-performance relationship by decoupling spatial audio fidelity (realism) from task...... performance by varying the spatial fidelity of the audio independently of its relevance to performance on the search task that subjects were to perform. This was achieved by having conditions in which subjects searched for a music-playing radio (an active sound source) and having conditions in which...... supplied only nonattenuated audio was detrimental to performance. Even so, this group of subjects consistently had the largest increase in presence scores over the baseline experiment. Further, the Witmer and Singer (1998) presence questionnaire was more sensitive to whether the audio source was active...

Modified BTC Algorithm for Audio Signal Coding

Directory of Open Access Journals (Sweden)

TOMIC, S.

2016-11-01

Full Text Available This paper describes modification of a well-known image coding algorithm, named Block Truncation Coding (BTC and its application in audio signal coding. BTC algorithm was originally designed for black and white image coding. Since black and white images and audio signals have different statistical characteristics, the application of this image coding algorithm to audio signal presents a novelty and a challenge. Several implementation modifications are described in this paper, while the original idea of the algorithm is preserved. The main modifications are performed in the area of signal quantization, by designing more adequate quantizers for audio signal processing. The result is a novel audio coding algorithm, whose performance is presented and analyzed in this research. The performance analysis indicates that this novel algorithm can be successfully applied in audio signal coding.

Selective attention modulates the direction of audio-visual temporal recalibration.

Science.gov (United States)

Ikumi, Nara; Soto-Faraco, Salvador

2014-01-01

Temporal recalibration of cross-modal synchrony has been proposed as a mechanism to compensate for timing differences between sensory modalities. However, far from the rich complexity of everyday life sensory environments, most studies to date have examined recalibration on isolated cross-modal pairings. Here, we hypothesize that selective attention might provide an effective filter to help resolve which stimuli are selected when multiple events compete for recalibration. We addressed this question by testing audio-visual recalibration following an adaptation phase where two opposing audio-visual asynchronies were present. The direction of voluntary visual attention, and therefore to one of the two possible asynchronies (flash leading or flash lagging), was manipulated using colour as a selection criterion. We found a shift in the point of subjective audio-visual simultaneity as a function of whether the observer had focused attention to audio-then-flash or to flash-then-audio groupings during the adaptation phase. A baseline adaptation condition revealed that this effect of endogenous attention was only effective toward the lagging flash. This hints at the role of exogenous capture and/or additional endogenous effects producing an asymmetry toward the leading flash. We conclude that selective attention helps promote selected audio-visual pairings to be combined and subsequently adjusted in time but, stimulus organization exerts a strong impact on recalibration. We tentatively hypothesize that the resolution of recalibration in complex scenarios involves the orchestration of top-down selection mechanisms and stimulus-driven processes.

Selective attention modulates the direction of audio-visual temporal recalibration.

Directory of Open Access Journals (Sweden)

Nara Ikumi

Full Text Available Temporal recalibration of cross-modal synchrony has been proposed as a mechanism to compensate for timing differences between sensory modalities. However, far from the rich complexity of everyday life sensory environments, most studies to date have examined recalibration on isolated cross-modal pairings. Here, we hypothesize that selective attention might provide an effective filter to help resolve which stimuli are selected when multiple events compete for recalibration. We addressed this question by testing audio-visual recalibration following an adaptation phase where two opposing audio-visual asynchronies were present. The direction of voluntary visual attention, and therefore to one of the two possible asynchronies (flash leading or flash lagging, was manipulated using colour as a selection criterion. We found a shift in the point of subjective audio-visual simultaneity as a function of whether the observer had focused attention to audio-then-flash or to flash-then-audio groupings during the adaptation phase. A baseline adaptation condition revealed that this effect of endogenous attention was only effective toward the lagging flash. This hints at the role of exogenous capture and/or additional endogenous effects producing an asymmetry toward the leading flash. We conclude that selective attention helps promote selected audio-visual pairings to be combined and subsequently adjusted in time but, stimulus organization exerts a strong impact on recalibration. We tentatively hypothesize that the resolution of recalibration in complex scenarios involves the orchestration of top-down selection mechanisms and stimulus-driven processes.

Strategy for robot motion and path planning in robot taping

Science.gov (United States)

Yuan, Qilong; Chen, I.-Ming; Lembono, Teguh Santoso; Landén, Simon Nelson; Malmgren, Victor

2016-06-01

Covering objects with masking tapes is a common process for surface protection in processes like spray painting, plasma spraying, shot peening, etc. Manual taping is tedious and takes a lot of effort of the workers. The taping process is a special process which requires correct surface covering strategy and proper attachment of the masking tape for an efficient surface protection. We have introduced an automatic robot taping system consisting of a robot manipulator, a rotating platform, a 3D scanner and specially designed taping end-effectors. This paper mainly talks about the surface covering strategies for different classes of geometries. The methods and corresponding taping tools are introduced for taping of following classes of surfaces: Cylindrical/extended surfaces, freeform surfaces with no grooves, surfaces with grooves, and rotational symmetrical surfaces. A collision avoidance algorithm is introduced for the robot taping manipulation. With further improvements on segmenting surfaces of taping parts and tape cutting mechanisms, such taping solution with the taping tool and the taping methodology can be combined as a very useful and practical taping package to assist humans in this tedious and time costly work.

Centrally managed tapes at DESY

International Nuclear Information System (INIS)

Hell, O.

1994-01-01

Tapes at DESY are managed by the computer center and thus offer virtually unlimited storage space to the DESY computer center users. This paper describes the most recent version of the DESY tape management system, its predecessors having been in service for many years

Tape-cast sensors and method of making

Science.gov (United States)

Mukundan, Rangachary [Santa Fe, NM; Brosha, Eric L [Los Alamos, NM; Garzon, Fernando H [Santa Fe, NM

2009-08-18

A method of making electrochemical sensors in which an electrolyte material is cast into a tape. Prefabricated electrodes are then partially embedded between two wet layers of the electrolyte tape to form a green sensor, and the green sensor is then heated to sinter the electrolyte tape around the electrodes. The resulting sensors can be used in applications such as, but not limited to, combustion control, environmental monitoring, and explosive detection. A electrochemical sensor formed by the tape-casting method is also disclosed.

Robust audio-visual speech recognition under noisy audio-video conditions.

Science.gov (United States)

Stewart, Darryl; Seymour, Rowan; Pass, Adrian; Ming, Ji

2014-02-01

This paper presents the maximum weighted stream posterior (MWSP) model as a robust and efficient stream integration method for audio-visual speech recognition in environments, where the audio or video streams may be subjected to unknown and time-varying corruption. A significant advantage of MWSP is that it does not require any specific measurements of the signal in either stream to calculate appropriate stream weights during recognition, and as such it is modality-independent. This also means that MWSP complements and can be used alongside many of the other approaches that have been proposed in the literature for this problem. For evaluation we used the large XM2VTS database for speaker-independent audio-visual speech recognition. The extensive tests include both clean and corrupted utterances with corruption added in either/both the video and audio streams using a variety of types (e.g., MPEG-4 video compression) and levels of noise. The experiments show that this approach gives excellent performance in comparison to another well-known dynamic stream weighting approach and also compared to any fixed-weighted integration approach in both clean conditions or when noise is added to either stream. Furthermore, our experiments show that the MWSP approach dynamically selects suitable integration weights on a frame-by-frame basis according to the level of noise in the streams and also according to the naturally fluctuating relative reliability of the modalities even in clean conditions. The MWSP approach is shown to maintain robust recognition performance in all tested conditions, while requiring no prior knowledge about the type or level of noise.

Audio scene segmentation for video with generic content

Science.gov (United States)

Niu, Feng; Goela, Naveen; Divakaran, Ajay; Abdel-Mottaleb, Mohamed

2008-01-01

In this paper, we present a content-adaptive audio texture based method to segment video into audio scenes. The audio scene is modeled as a semantically consistent chunk of audio data. Our algorithm is based on "semantic audio texture analysis." At first, we train GMM models for basic audio classes such as speech, music, etc. Then we define the semantic audio texture based on those classes. We study and present two types of scene changes, those corresponding to an overall audio texture change and those corresponding to a special "transition marker" used by the content creator, such as a short stretch of music in a sitcom or silence in dramatic content. Unlike prior work using genre specific heuristics, such as some methods presented for detecting commercials, we adaptively find out if such special transition markers are being used and if so, which of the base classes are being used as markers without any prior knowledge about the content. Our experimental results show that our proposed audio scene segmentation works well across a wide variety of broadcast content genres.

Levitation characteristics of HTS tape stacks

Energy Technology Data Exchange (ETDEWEB)

Pokrovskiy, S. V.; Ermolaev, Y. S.; Rudnev, I. A. [National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow (Russian Federation)

2015-03-15

Due to the considerable development of the technology of second generation high-temperature superconductors and a significant improvement in their mechanical and transport properties in the last few years it is possible to use HTS tapes in the magnetic levitation systems. The advantages of tapes on a metal substrate as compared with bulk YBCO material primarily in the strength, and the possibility of optimizing the convenience of manufacturing elements of levitation systems. In the present report presents the results of the magnetic levitation force measurements between the stack of HTS tapes containing of tapes and NdFeB permanent magnet in the FC and ZFC regimes. It was found a non- linear dependence of the levitation force from the height of the array of stack in both modes: linear growth at small thickness gives way to flattening and constant at large number of tapes in the stack. Established that the levitation force of stacks comparable to that of bulk samples. The numerical calculations using finite element method showed that without the screening of the applied field the levitation force of the bulk superconductor and the layered superconductor stack with a critical current of tapes increased by the filling factor is exactly the same, and taking into account the screening force slightly different.

Digital audio watermarking fundamentals, techniques and challenges

CERN Document Server

Xiang, Yong; Yan, Bin

2017-01-01

This book offers comprehensive coverage on the most important aspects of audio watermarking, from classic techniques to the latest advances, from commonly investigated topics to emerging research subdomains, and from the research and development achievements to date, to current limitations, challenges, and future directions. It also addresses key topics such as reversible audio watermarking, audio watermarking with encryption, and imperceptibility control methods. The book sets itself apart from the existing literature in three main ways. Firstly, it not only reviews classical categories of audio watermarking techniques, but also provides detailed descriptions, analysis and experimental results of the latest work in each category. Secondly, it highlights the emerging research topic of reversible audio watermarking, including recent research trends, unique features, and the potentials of this subdomain. Lastly, the joint consideration of audio watermarking and encryption is also reviewed. With the help of this...

Kinesio Taping to generate skin convolutions is not better than sham taping for people with chronic non-specific low back pain: a randomised trial

Directory of Open Access Journals (Sweden)

Patrícia do Carmo Silva Parreira

2014-06-01

Full Text Available Question: For people with chronic low back pain, does Kinesio Taping, applied according to the treatment manual to create skin convolutions, reduce pain and disability more than a simple application without convolutions? Design: Randomised trial with concealed allocation, intention-to-treat analysis and blinded assessment of some outcomes. Participants: 148 participants with chronic non-specific low back pain. Intervention: Experimental group participants received eight sessions (over four weeks of Kinesio Taping applied according to the Kinesio Taping Method treatment manual (ie, 10 to 15% tension applied in flexion to create skin convolutions in neutral. Control group participants received eight sessions (over four weeks of Kinesio Taping with no tension, creating no convolutions. Outcome measures: The primary outcome measures were pain intensity and disability after the four-week intervention. Secondary outcomes were pain intensity and disability 12 weeks after randomisation, and global perceived effect at both four and 12 weeks after randomisation. Results: Applying Kinesio Tape to create convolutions in the skin did not significantly change its effect on pain (MD–0.4 points, 95% CI–1.3 to 0.4 or disability (MD–0.3 points, 95% CI–1.9 to 1.3 at four weeks. There was a small difference in favour of the experimental group for the secondary outcome of global perceived effect (MD 1.4 points, 95% CI 0.3 to 2.5 at four weeks. No significant between-group differences were observed for the other secondary outcomes. Conclusion: Kinesio Taping applied with stretch to generate convolutions in the skin was no more effective than simple application of the tape without tension for the outcomes measured. These results challenge the proposed mechanism of action of this therapy. Trial registration: Brazilian Registry of Clinical Trials, RBR-7ggfkv. [Parreira PCS, Costa LCM, Takahashi R, Hespanhol Junior LC, da Luz Junior MA, da Silva TM, Costa LOP

Is application of Kinesio tape to treat hyperlordosis more effective on abdominal muscles or hamstrings?

Directory of Open Access Journals (Sweden)

Sara Abolahrari Shirazi

2018-01-01

Full Text Available Background: Hyperlordosis is defined as an abnormal increase in the lumbar arch of >40°. This study compared two taping techniques include abdominal muscles and hamstrings taping for the treatment of lumbar hyperlordosis. Materials and Methods: The randomized clinical trial was performed in Shiraz, Iran, during June and September 2014. Thirty women aged 20–45 years old with at least 40° lumbar lordosis participated. The women were randomized into two groups (n = 15. Abdominal muscles taping was performed for the first group, whereas the other group underwent hamstrings taping with 30% tension. Lumbar lordosis was measured before, immediately after, and 24 h after taping. The two-way repeated measures analysis of variance was used to compare the two groups for lumbar lordosis angle. Results: No significant differences were detected between the lumbar lordosis angles before and immediately after taping in the two groups (P > 0.05. However, a significant reduction was observed in lordosis angle in the abdominal group and the hamstring group 24 h after taping relative to before intervention (P < 0.01. Conclusion: Taping of the abdominal and hamstring muscles was not effective immediately, whereas it decreased lordosis after 24 h.

Preparation and characterization of Bi-2223 tapes

International Nuclear Information System (INIS)

Hense, K.; Kirchmayr, H.; Kovac, P.; Lackner, R.; Mueller, M.; Pachla, W.; Pitel, J.; Polak, M.; Usak, P.

2003-01-01

In a concerted action between Austrian, Slovakian and Polish research institutes Bi-2223 tapes have been prepared and characterized by different physical methods. Metallographic studies by optical as well as electron microscopy, measurements of critical current (angle dependent) and losses have been performed. Properties of individual filaments extracted from multifilamentary tapes were also studied. Uniformity of local I C of these filaments were considerably lower than that of the whole tape. This indicates that improvement of filament homogeneity could improve the over all J C in tapes. The application of these tapes for optimized magnet coils will also be discussed. From these investigations a better understanding of the mechanisms, limiting the critical current could be achieved and more optimized preparation methods can be envisioned

Ever Since the World Began: A Reading & Interview with Masha Tupitsyn

Directory of Open Access Journals (Sweden)

Masha Tupitsyn

2013-07-01

Full Text Available Writer and cultural critic Masha Tupitsyn is interviewed on her audio recording of her reading Ever Since This World Began, produced specially for this issue of continent. and adapted from her recently published Love Dog (Success and Failure out from Penny-Ante Editions.

Reel-to-reel substrate tape polishing system

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

2005-06-21

Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

Web Audio/Video Streaming Tool

Science.gov (United States)

Guruvadoo, Eranna K.

2003-01-01

In order to promote NASA-wide educational outreach program to educate and inform the public of space exploration, NASA, at Kennedy Space Center, is seeking efficient ways to add more contents to the web by streaming audio/video files. This project proposes a high level overview of a framework for the creation, management, and scheduling of audio/video assets over the web. To support short-term goals, the prototype of a web-based tool is designed and demonstrated to automate the process of streaming audio/video files. The tool provides web-enabled users interfaces to manage video assets, create publishable schedules of video assets for streaming, and schedule the streaming events. These operations are performed on user-defined and system-derived metadata of audio/video assets stored in a relational database while the assets reside on separate repository. The prototype tool is designed using ColdFusion 5.0.

Semantic Context Detection Using Audio Event Fusion

Directory of Open Access Journals (Sweden)

Cheng Wen-Huang

2006-01-01

Full Text Available Semantic-level content analysis is a crucial issue in achieving efficient content retrieval and management. We propose a hierarchical approach that models audio events over a time series in order to accomplish semantic context detection. Two levels of modeling, audio event and semantic context modeling, are devised to bridge the gap between physical audio features and semantic concepts. In this work, hidden Markov models (HMMs are used to model four representative audio events, that is, gunshot, explosion, engine, and car braking, in action movies. At the semantic context level, generative (ergodic hidden Markov model and discriminative (support vector machine (SVM approaches are investigated to fuse the characteristics and correlations among audio events, which provide cues for detecting gunplay and car-chasing scenes. The experimental results demonstrate the effectiveness of the proposed approaches and provide a preliminary framework for information mining by using audio characteristics.

Distortion Estimation in Compressed Music Using Only Audio Fingerprints

NARCIS (Netherlands)

Doets, P.J.O.; Lagendijk, R.L.

2008-01-01

An audio fingerprint is a compact yet very robust representation of the perceptually relevant parts of an audio signal. It can be used for content-based audio identification, even when the audio is severely distorted. Audio compression changes the fingerprint slightly. We show that these small

Detecting double compression of audio signal

Science.gov (United States)

Yang, Rui; Shi, Yun Q.; Huang, Jiwu

2010-01-01

MP3 is the most popular audio format nowadays in our daily life, for example music downloaded from the Internet and file saved in the digital recorder are often in MP3 format. However, low bitrate MP3s are often transcoded to high bitrate since high bitrate ones are of high commercial value. Also audio recording in digital recorder can be doctored easily by pervasive audio editing software. This paper presents two methods for the detection of double MP3 compression. The methods are essential for finding out fake-quality MP3 and audio forensics. The proposed methods use support vector machine classifiers with feature vectors formed by the distributions of the first digits of the quantized MDCT (modified discrete cosine transform) coefficients. Extensive experiments demonstrate the effectiveness of the proposed methods. To the best of our knowledge, this piece of work is the first one to detect double compression of audio signal.

Ubiquitous Graphene Electronics on Scotch Tape

Science.gov (United States)

Chung, Yoonyoung; Ho Kim, Hyun; Lee, Sangryun; Lee, Eunho; Won Kim, Seong; Ryu, Seunghwa; Cho, Kilwon

2015-07-01

We report a novel concept of graphene transistors on Scotch tape for use in ubiquitous electronic systems. Unlike common plastic substrates such as polyimide and polyethylene terephthalate, the Scotch tape substrate is easily attached onto various objects such as banknotes, curved surfaces, and human skin, which implies potential applications wherein electronics can be placed in any desired position. Furthermore, the soft Scotch tape serves as an attractive substrate for flexible/foldable electronics that can be significantly bent, or even crumpled. We found that the adhesive layer of the tape with a relatively low shear modulus relaxes the strain when subjected to bending. The capacitance of the gate dielectric made of oxidized aluminum oxide was 1.5 μF cm-2, so that a supply voltage of only 2.5 V was sufficient to operate the devices. As-fabricated graphene transistors on Scotch tape exhibited high electron mobility of 1326 (±155) cm2 V-1 s-1 the transistors still showed high mobility of 1254 (±478) cm2 V-1 s-1 even after they were crumpled.

Elicitation of attributes for the evaluation of audio-on audio-interference

DEFF Research Database (Denmark)

Francombe, Jon; Mason, R.; Dewhirst, M.

2014-01-01

procedure was used to reduce these phrases into a comprehensive set of attributes. Groups of experienced and inexperienced listeners determined nine and eight attributes, respectively. These attribute sets were combined by the listeners to produce a final set of 12 attributes: masking, calming, distraction......An experiment to determine the perceptual attributes of the experience of listening to a target audio program in the presence of an audio interferer was performed. The first stage was a free elicitation task in which a total of 572 phrases were produced. In the second stage, a consensus vocabulary...

Ultrasound assessment of tension-free vaginal tape (TVT).

Science.gov (United States)

Flock, F; Kohorst, F; Kreienberg, R; Reich, A

2011-01-01

To date, no standardization for the visualization of tension-free vaginal tape (TVT) has been established in clinical practice. The aim of this prospective observational study was to evaluate the shape and position of the tape using ultrasound and to compare this data with clinical postoperative results. In a three-year period, 296 patients with clinically and urodynamically proven stress urinary incontinence (SUI) were treated with TVT and received follow-up in our department. An additional 12 patients, who were initially treated in other hospitals and had postoperative problems, were included in this study. Depending on the outcome after 3 months, the patients were divided into groups with and without specific disorders. The TVT was evaluated by introital ultrasound. The position of the tape was established by its location in relation to the urethral length and the distance to the hypoechoic center of the urethra (HCU). A suitable TVT position was determined in patients without any postoperative disorders. The mean value for the TVT position at rest in relation to the urethral length was 61 %. The distance to the HCU was 4.6 ± 1.5 mm. In patients with persistent SUI, the tape was more often located under the inner (3 % vs. 0 %) or outer quarter (29 % vs. 13 %, p = 0.004). In patients with residual volume, the distance to the urethra was significantly lower (2.7 vs. 4.6, p TVT may be regularly investigated using ultrasound. In combination with the clinical outcome, it represents an important method of evaluating the tape and assists in the planning of a future therapeutic course of action in cases of postoperative problems. © Georg Thieme Verlag KG Stuttgart · New York.

BALLISTIC RESISTANT ARTICLES COMPRISING TAPES

NARCIS (Netherlands)

VAN DER EEM, JORIS; HARINGS, JULES; JANSE, GERARDUS; TJADEN, HENDRIK

2015-01-01

The invention pertains to a ballistic-resistant moulded article comprising a compressed stack of sheets comprising reinforcing tapes having a tensile strength of at least 1.0 GPa, a tensile modulus of at least 40 GPa, and a tensile energy-to-break of at least 15 J/g, the direction of the tapes

Design of double tape recorder data acquisition system

International Nuclear Information System (INIS)

Guo Tianrui; Du Yifei

1995-01-01

In the data acquisition system supported by the microcomputer tape recorder, as the acquisition speed is often limited by the low speed of tape recorder, so a double tape recorder system is designed. In this system, two tape recorders are used in on-line acquisition system simultaneously. One DMA channel used is one designed for soft disk driver, another DMA channel used is one retained for user. By this way, the speed of tape writing could be increased to nearly twice as much. In order to prevent the data confusion, the authors open two data buffers in system and write different mark in each buffer, then write the data block to two tape recorders according to the mark. The system complies with the principle: 'Double write, Double read'

Diagnostics of sources of disturbances and distribution of vibrations over the width of a tape in tape-feed mechanisms

Science.gov (United States)

Kenstavichyus, A. B. B.

1973-01-01

Disturbances created by certain assemblies and components of tape-feed mechanisms (TFM) and acting on a moving magnetic tape are studied. The method, based on elements of digital logic, is established by stress-strain diagrams of the longitudinal deformations and vibrations across the width of a magnetic tape. Experimental studies were carried out for determination of the functional relationships of longitudinal deformations in a section of magnetic tape to the magnitude of roller play, tension vibrations rate of movement, and elasticity of magnetic tapes. A block diagram of the measurements is shown. Appropriate digital computer algorithms and programs were proposed for statistical analysis of the data obtained. Estimates of the mathematical expectation, dispersion, intercorrelation function, energy spectral density, and distribution pattern of the random process values were calculated.

The Safeguard of Audio Collections: A Computer Science Based Approach to Quality Control—The Case of the Sound Archive of the Arena di Verona

Directory of Open Access Journals (Sweden)

Federica Bressan

2013-01-01

Full Text Available In the field of multimedia, very little attention is given to the activities involved in the preservation of audio documents. At the same time, more and more archives storing audio and video documents face the problem of obsolescing and degrading media, which could largely benefit from the instruments and the methodologies of research in multimedia. This paper presents the methodology and the results of the Italian project REVIVAL, aimed at the development of a hardware/software platform to support the active preservation of the audio collection of the Fondazione Arena di Verona, one of the finest in Europe for the operatic genre, with a special attention on protocols and tools for quality control. On the scientific side, the most significant objectives achieved by the project are (i the setup of a working environment inside the archive, (ii the knowledge transfer to the archival personnel, (iii the realization of chemical analyses on magnetic tapes in collaboration with experts in the fields of materials science and chemistry, and (iv the development of original open-source software tools. On the cultural side, the recovery, the safeguard, and the access to unique copies of unpublished live recordings of artists the calibre of Domingo and Pavarotti are of great musicological and economical value.

CERN automatic audio-conference service

CERN Multimedia

Sierra Moral, R

2009-01-01

Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first Euro...

CERN automatic audio-conference service

CERN Document Server

Sierra Moral, R

2010-01-01

Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first Euro...

Debugging of Class-D Audio Power Amplifiers

DEFF Research Database (Denmark)

Crone, Lasse; Pedersen, Jeppe Arnsdorf; Mønster, Jakob Døllner

2012-01-01

Determining and optimizing the performance of a Class-D audio power amplier can be very dicult without knowledge of the use of audio performance measuring equipment and of how the various noise and distortion sources in uence the audio performance. This paper gives an introduction on how to measure...

Urinary incontinence - tension-free vaginal tape

Science.gov (United States)

... ency/article/007377.htm Urinary incontinence - tension-free vaginal tape To use the sharing features on this page, please enable JavaScript. Placement of tension-free vaginal tape is surgery to help control stress urinary ...

Design of an audio advertisement dataset

Science.gov (United States)

Fu, Yutao; Liu, Jihong; Zhang, Qi; Geng, Yuting

2015-12-01

Since more and more advertisements swarm into radios, it is necessary to establish an audio advertising dataset which could be used to analyze and classify the advertisement. A method of how to establish a complete audio advertising dataset is presented in this paper. The dataset is divided into four different kinds of advertisements. Each advertisement's sample is given in *.wav file format, and annotated with a txt file which contains its file name, sampling frequency, channel number, broadcasting time and its class. The classifying rationality of the advertisements in this dataset is proved by clustering the different advertisements based on Principal Component Analysis (PCA). The experimental results show that this audio advertisement dataset offers a reliable set of samples for correlative audio advertisement experimental studies.

Making the Switch to Digital Audio

Directory of Open Access Journals (Sweden)

Shannon Gwin Mitchell

2004-12-01

Full Text Available In this article, the authors describe the process of converting from analog to digital audio data. They address the step-by-step decisions that they made in selecting hardware and software for recording and converting digital audio, issues of system integration, and cost considerations. The authors present a brief description of how digital audio is being used in their current research project and how it has enhanced the “quality” of their qualitative research.

Efficient Audio Power Amplification - Challenges

DEFF Research Database (Denmark)

Andersen, Michael Andreas E.

2005-01-01

For more than a decade efficient audio power amplification has evolved and today switch-mode audio power amplification in various forms are the state-of-the-art. The technical steps that lead to this evolution are described and in addition many of the challenges still to be faced and where...

Applied rolling and sensitivity of Bi(2223)/Ag tapes on Ic degradation by mechanical stress

International Nuclear Information System (INIS)

Kovac, P.; Bukva, P.; Husek, I.; Richens, P.E.; Jones, H.

1999-01-01

An experimental study of multicore Bi(2223)/Ag tapes, roll-sintered by different methods and subjected to bending and tension stresses has been performed. The tapes, of various technological histories, were bent and tensioned and subsequently the transport current was measured at each stressed state. Comparison of I c degradation curves shows that applied rolling may influence the sensitivity of Bi-2223 filaments against the mechanical stress. The existence of transverse microcracks caused by intermediate rolling leads to a higher sensitivity of the tape to bending. A lowering of critical current degradation was observed for two-axially rolled tapes having a higher filament density and better homogeneity prior to sintering treatment. (author)

Tape SCSI monitoring and encryption at CERN

Science.gov (United States)

Laskaridis, Stefanos; Bahyl, V.; Cano, E.; Leduc, J.; Murray, S.; Cancio, G.; Kruse, D.

2017-10-01

CERN currently manages the largest data archive in the HEP domain; over 180PB of custodial data is archived across 7 enterprise tape libraries containing more than 25,000 tapes and using over 100 tape drives. Archival storage at this scale requires a leading edge monitoring infrastructure that acquires live and lifelong metrics from the hardware in order to assess and proactively identify potential drive and media level issues. In addition, protecting the privacy of sensitive archival data is becoming increasingly important and with it the need for a scalable, compute-efficient and cost-effective solution for data encryption. In this paper, we first describe the implementation of acquiring tape medium and drive related metrics reported by the SCSI interface and its integration with our monitoring system. We then address the incorporation of tape drive real-time encryption with dedicated drive hardware into the CASTOR [1] hierarchical mass storage system.

Consequence of audio visual collection in school libraries

OpenAIRE

Kuri, Ramesh

2016-01-01

The collection of Audio-Visual in library plays important role in teaching and learning. The importance of audio visual (AV) technology in education should not be underestimated. If audio-visual collection in library is carefully planned and designed, it can provide a rich learning environment. In this article, an author discussed the consequences of Audio-Visual collection in libraries especially for students of school library

Structural properties of superconducting Bi-2223/Ag tapes

Energy Technology Data Exchange (ETDEWEB)

Gottschalck Andersen, L.

2001-05-01

The structural properties of silver clad high-T{sub c} superconducting ceramic tapes of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} (Bi-2223) have been investigated by means of synchrotron X-ray diffraction (including the 3DXRD microscope setup), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDS). By synchrotron X-ray diffraction in situ studies of the phase development during the transformation of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 1}Cu{sub 2}O{sub x} (Bi-2212) into Bi-2223, the stoichiometry changes and the texture have been performed during annealing in 8% O{sub 2} and in air. Furthermore, an annealing with two high temperature cycles has been performed to study the equilibrium phenomena. During heating (Ca,Sr){sub 2}PbO{sub 4} decomposes at temperatures between 700 deg. C and 840 deg.C. Simultaneously, the Bi-2212 lattice contracts, indicating an incorporation of Pb. Moreover, the grain mis-alignment decreases significantly. In air we have observed that Bi-2212 partly dissociates into (Ca,Sr){sub 2}CuO{sub 3} and a liquid at temperatures above 812 deg. C. At the annealing temperature Bi-2212 and (Ca,Sr){sub 2}CuO{sub 3} react with the liquid to form Bi-2223. The transformation mechanism is discussed. During cooling below {approx}750 deg.C (Ca,Sr){sub 2}CuO{sub 3} and the liquid mainly transform into Bi-2201. Below {approx}780 deg. C Bi-2223 decomposes to 3221. In addition, a two-step cooling experiment and a decomposition study have been performed in 8% O{sub 2}. By TEM the grain and colony size in the c-axis direction, the angles of c-axis tilt grain boundaries and the intergrowth content are investigated. A fully processed tape has on average 50% thicker grains than a tape after the 1st annealing. The angles of c-axis tilt grain boundaries are on average 14 deg. and 26 deg. for the fully processed tape and the tape after the 1st annealing, respectively. The intergrowth content (15%) and

Effect of binder concentration and blade gap on Yttria stabilized Zirconia tapes obtained by tape casting

Energy Technology Data Exchange (ETDEWEB)

Mena Garcia, J.; Reyes Rojas, A.; Rodriguez Gonzalez, C.A.; Hernandez Paz, J.; Garcia Casillas, P.E.; Enriquez Carrejo, J.L.; Camacho Montes, H.

2016-07-01

The tape casting method has kept its interest over the years due to the wide spectrum of its applications and its economic viability in comparison to other techniques focused on micrometric thin films. Two key parameters for tape casting are the binder relative amount and the Dr. Blade gap. The binder relative amount has a strong influence on the rheological properties for the ceramic YSZ slurry (ethanol, butanone, TEA, PVB, PEG, DEP). The coefficient K and the exponent m of the Cross model are reported to be inside the ranges 152.25-231.12 and 0.00987-0.26646 for PVB binder weight percentage concentrations between 6% and 12%. It is possible to describe the ceramic tape thickness dependence by means of a linear relation depending on the Dr. Blade gap whose linear coefficients (slope) are equal to 0.0350 and 0.2171 for green and sintered tapes respectively, with the YSZ slurry of the present work. (Author)

New audio applications of beryllium metal

International Nuclear Information System (INIS)

Sato, M.

1977-01-01

The major applications of beryllium metal in the field of audio appliances are for the vibrating cones for the two types of speakers 'TWITTER' for high range sound and 'SQUAWKER' for mid range sound, and also for beryllium cantilever tube assembled in stereo cartridge. These new applications are based on the characteristic property of beryllium having high ratio of modulus of elasticity to specific gravity. The production of these audio parts is described, and the audio response is shown. (author)

Methods and systems for fabricating high quality superconducting tapes

Science.gov (United States)

Majkic, Goran; Selvamanickam, Venkat

2018-02-13

An MOCVD system fabricates high quality superconductor tapes with variable thicknesses. The MOCVD system can include a gas flow chamber between two parallel channels in a housing. A substrate tape is heated and then passed through the MOCVD housing such that the gas flow is perpendicular to the tape's surface. Precursors are injected into the gas flow for deposition on the substrate tape. In this way, superconductor tapes can be fabricated with variable thicknesses, uniform precursor deposition, and high critical current densities.

Increasing the efficiency of tape-based storage backends

International Nuclear Information System (INIS)

Bessone, Nicola; Cancio, German; Murray, Steve; Taurelli, Giulia

2010-01-01

HSM systems such as the CERN's Advanced STORage manager (CASTOR) [1] are responsible for storing Petabytes of data which is first cached on disk and then persistently stored on tape media. The contents of these tapes are regularly repacked from older, lower-density media to new-generation, higher-density media in order to free up physical space and ensure long term data integrity and availability. With the evolution of price decay and higher capacity of disk (and flash memory) based storage, our future vision for tape usage is to move away from serving on demand, random, per-file access to non-disk cached files, and to move towards loosely coupled, efficient bulk data transfers where large-volume data sets are stored and retrieved in aggregations, fully exploiting the stream-based nature of tape media. Mechanisms for grouped migration policies and priorities have been implemented, and an innovative tape format optimized for data aggregations is being developed. This new tape format will also allow for increasing the performance of repacking data from old to newer generation tape media with substantially reduced hardware costs. In this paper, we will describe the improvements for migration policies and priorities, as well as the proposed tape format and the changes which will be applied to the architecture of the CASTOR mass storage system.

The Influence of Solid-State Drawing on Mechanical Properties and Hydrolytic Degradation of Melt-Spun Poly(Lactic Acid (PLA Tapes

Directory of Open Access Journals (Sweden)

Fang Mai

2015-12-01

Full Text Available The influence of solid-state drawing on the morphology of melt-spun poly(l-lactic acid (PLLA tapes, and the accompanying changes in mechanical and degradation behaviour have been studied. Mechanical properties are found to be strongly dependent on both applied draw ratio and drawing temperature. Moduli of these highly oriented tapes are significantly increased compared to as-extruded tapes at both ambient and elevated temperatures. Interestingly, drawing leads to a significant increase in elongation to break (~3 times and toughness (~13 times compared to as-extruded tapes. Structural and morphological characterization indicates strain-induced crystallization as well as an increase in orientation of the crystalline phase at small strains. Upon further stretching, an “overdrawing” regime is observed, with decreased crystalline orientation due to the breakage of existing crystals. For fixed draw ratios, a significant increase in Young’s modulus and tensile strength is observed with increasing drawing temperature, due to a higher crystallinity and orientation obtained for tapes drawn at higher temperatures. FT-IR results indicate no crystal transformation after drawing, with the α-form being observed in all tapes. Hydrolytic degradability of PLLA was significantly reduced by solid-state drawing.

Tensorial dynamic time warping with articulation index representation for efficient audio-template learning.

Science.gov (United States)

Le, Long N; Jones, Douglas L

2018-03-01

Audio classification techniques often depend on the availability of a large labeled training dataset for successful performance. However, in many application domains of audio classification (e.g., wildlife monitoring), obtaining labeled data is still a costly and laborious process. Motivated by this observation, a technique is proposed to efficiently learn a clean template from a few labeled, but likely corrupted (by noise and interferences), data samples. This learning can be done efficiently via tensorial dynamic time warping on the articulation index-based time-frequency representations of audio data. The learned template can then be used in audio classification following the standard template-based approach. Experimental results show that the proposed approach outperforms both (1) the recurrent neural network approach and (2) the state-of-the-art in the template-based approach on a wildlife detection application with few training samples.

What do pharmaceutical industry professionals in Europe believe about involving patients and the public in research and development of medicines? A qualitative interview study.

Science.gov (United States)

Parsons, Suzanne; Starling, Bella; Mullan-Jensen, Christine; Tham, Su-Gwan; Warner, Kay; Wever, Kim

2016-01-07

To explore European-based pharmaceutical industry professionals' beliefs about patient and public involvement (PPI) in medicines research and development (R&D). Pharmaceutical companies in the UK, Poland and Spain. 21 pharmaceutical industry professionals, four based in the UK, five with pan-European roles, four based in Spain and eight based in Poland. Qualitative interview study (telephone and face-to-face, semistructured interviews). All interviews were audio taped, translated (where appropriate) and transcribed for analysis using the Framework approach. 21 pharmaceutical industry professionals participated. Key themes were: beliefs about (1) whether patients and the public should be involved in medicines R&D; (2) the barriers and facilitators to PPI in medicines R&D and (3) how the current relationships between the pharmaceutical industry, patient organisations and patients influence PPI in medicines R&D. Although interviewees appeared positive about PPI, many were uncertain about when, how and which patients to involve. Patients and the public's lack of knowledge and interest in medicines R&D, and the pharmaceutical industry's lack of knowledge, interest and receptivity to PPI were believed to be key challenges to increasing PPI. Interviewees also believed that relationships between the pharmaceutical industry, patient organisations, patients and the public needed to change to facilitate PPI in medicines R&D. Existing pharmaceutical industry codes of practice and negative media reporting of the pharmaceutical industry were also seen as negative influences on these relationships. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Methods and systems for fabricating high quality superconducting tapes

Energy Technology Data Exchange (ETDEWEB)

Majkic, Goran; Selvamanickam, Venkat

2018-02-13

An MOCVD system fabricates high quality superconductor tapes with variable thicknesses. The MOCVD system can include a gas flow chamber between two parallel channels in a housing. A substrate tape is heated and then passed through the MOCVD housing such that the gas flow is perpendicular to the tape's surface. Precursors are injected into the gas flow for deposition on the substrate tape. In this way, superconductor tapes can be fabricated with variable thicknesses, uniform precursor deposition, and high critical current densities.

Increasing the efficiency of tape-based storage backends

CERN Document Server

Bessone, N; Murray, S; Taurelli, G; CERN. Geneva. IT Department

2010-01-01

HSM systems such as the CERN’s Advanced STORage manager (CASTOR) [1] are responsible for storing Petabytes of data which is first cached on disk and then persistently stored on tape media. The contents of these tapes are regularly repacked from older, lower-density media to new-generation, higher-density media in order to free up physical space and ensure long term data integrity and availability. With the evolution of price decay and higher capacity of disk (and flash memory) based storage, our future vision for tape usage is to move away from serving on demand, random, per-file access to non-disk cached files, and to move towards loosely coupled, efficient bulk data transfers where large-volume data sets are stored and retrieved in aggregations, fully exploiting the stream-based nature of tape media. Mechanisms for grouped migration policies and priorities have been implemented, and an innovative tape format optimized for data aggregations is being developed. This new tape format will also allow for incre...

Efficient audio power amplification - challenges

Energy Technology Data Exchange (ETDEWEB)

Andersen, Michael A.E.

2005-07-01

For more than a decade efficient audio power amplification has evolved and today switch-mode audio power amplification in various forms are the state-of-the-art. The technical steps that lead to this evolution are described and in addition many of the challenges still to be faced and where extensive research and development are needed is covered. (au)

Problematizing qualitative educational research: reading observations and interviews through rhizoanalysis and multiple literacies

Directory of Open Access Journals (Sweden)

Diana Masny

2015-06-01

Full Text Available This article problematizes conventional qualitative educational research through a process of reading observation and interview in rhizomatic research. Such an approach to doing research brings together Multiple Literacies Theory and rhizoanalysis, innovative practices with transdisciplinary implications. This article contributes to on-going research regarding the emergence of multiple literacies and rhizoanalysis as a way to experiment in disrupting conventional research concepts, in this case, observations and interviews. Rhizoanalysis is proposed because of its non-hierarchical and non-linear perspective to conducting qualitative research. In a similar manner, Multiple Literacies Theory seeks to release school-based literacy from its privileged position and unfold literacy as multiple and non-hierarchical. This theoretical and practical stance to educational research is deployed in an assemblage that includes a study of multiple writing systems with 5- to 8 –year- old multilingual children. Reading observation and interviews through the lens of rhizoanalysis and Multiple Literacies Theory becomes an exploration in reconceptualization of qualitative research.

Detection Of Alterations In Audio Files Using Spectrograph Analysis

Directory of Open Access Journals (Sweden)

Anandha Krishnan G

2015-08-01

Full Text Available The corresponding study was carried out to detect changes in audio file using spectrograph. An audio file format is a file format for storing digital audio data on a computer system. A sound spectrograph is a laboratory instrument that displays a graphical representation of the strengths of the various component frequencies of a sound as time passes. The objectives of the study were to find the changes in spectrograph of audio after altering them to compare altering changes with spectrograph of original files and to check for similarity and difference in mp3 and wav. Five different alterations were carried out on each audio file to analyze the differences between the original and the altered file. For altering the audio file MP3 or WAV by cutcopy the file was opened in Audacity. A different audio was then pasted to the audio file. This new file was analyzed to view the differences. By adjusting the necessary parameters the noise was reduced. The differences between the new file and the original file were analyzed. By adjusting the parameters from the dialog box the necessary changes were made. The edited audio file was opened in the software named spek where after analyzing a graph is obtained of that particular file which is saved for further analysis. The original audio graph received was combined with the edited audio file graph to see the alterations.

DICOM implementation on online tape library storage system

Science.gov (United States)

Komo, Darmadi; Dai, Hailei L.; Elghammer, David; Levine, Betty A.; Mun, Seong K.

1998-07-01

The main purpose of this project is to implement a Digital Image and Communications (DICOM) compliant online tape library system over the Internet. Once finished, the system will be used to store medical exams generated from U.S. ARMY Mobile ARMY Surgical Hospital (MASH) in Tuzla, Bosnia. A modified UC Davis implementation of DICOM storage class is used for this project. DICOM storage class user and provider are implemented as the system's interface to the Internet. The DICOM software provides flexible configuration options such as types of modalities and trusted remote DICOM hosts. Metadata is extracted from each exam and indexed in a relational database for query and retrieve purposes. The medical images are stored inside the Wolfcreek-9360 tape library system from StorageTek Corporation. The tape library system has nearline access to more than 1000 tapes. Each tape has a capacity of 800 megabytes making the total nearline tape access of around 1 terabyte. The tape library uses the Application Storage Manager (ASM) which provides cost-effective file management, storage, archival, and retrieval services. ASM automatically and transparently copies files from expensive magnetic disk to less expensive nearline tape library, and restores the files back when they are needed. The ASM also provides a crash recovery tool, which enable an entire file system restore in a short time. A graphical user interface (GUI) function is used to view the contents of the storage systems. This GUI also allows user to retrieve the stored exams and send the exams to anywhere on the Internet using DICOM protocols. With the integration of different components of the system, we have implemented a high capacity online tape library storage system that is flexible and easy to use. Using tape as an alternative storage media as opposed to the magnetic disk has the great potential of cost savings in terms of dollars per megabyte of storage. As this system matures, the Hospital Information Systems

Melt processing of Yb-123 tapes

International Nuclear Information System (INIS)

Athur, S. P.; Balachandran, U.; Salama, K.

2000-01-01

The innovation of a simple, scalable process for manufacturing long-length conductors of HTS is essential to potential commercial applications such as power cables, magnets, and transformers. In this paper the authors demonstrate that melt processing of Yb-123 tapes made by the PIT route is an alternative to the coated conductor and Bi-2223 PIT tape fabrication techniques. Ag-clad Yb-123 tapes were fabricated by groove rolling and subsequently, melt processed in different oxygen partial pressures in a zone-melting furnace with a gradient of 140 C/cm. The transition temperatures measured were found to be around 81 K undermost processing conditions. EPMA of the tapes processed under different conditions show the 123 phase to be Ba deficient and Cu and Yb rich. Critical current was measured at various temperatures from 77 K to 4.2 K. The J c increased with decrease in pO 2 . The highest I c obtained was 52 A at 4.2 K

AudioMUD: a multiuser virtual environment for blind people.

Science.gov (United States)

Sánchez, Jaime; Hassler, Tiago

2007-03-01

A number of virtual environments have been developed during the last years. Among them there are some applications for blind people based on different type of audio, from simple sounds to 3-D audio. In this study, we pursued a different approach. We designed AudioMUD by using spoken text to describe the environment, navigation, and interaction. We have also introduced some collaborative features into the interaction between blind users. The core of a multiuser MUD game is a networked textual virtual environment. We developed AudioMUD by adding some collaborative features to the basic idea of a MUD and placed a simulated virtual environment inside the human body. This paper presents the design and usability evaluation of AudioMUD. Blind learners were motivated when interacted with AudioMUD and helped to improve the interaction through audio and interface design elements.

New Interview and Observation Measures of the Broader Autism Phenotype: Description of Strategy and Reliability Findings for the Interview Measures.

Science.gov (United States)

Parr, Jeremy R; De Jonge, Maretha V; Wallace, Simon; Pickles, Andrew; Rutter, Michael L; Le Couteur, Ann S; van Engeland, Herman; Wittemeyer, Kerstin; McConachie, Helen; Roge, Bernadette; Mantoulan, Carine; Pedersen, Lennart; Isager, Torben; Poustka, Fritz; Bolte, Sven; Bolton, Patrick; Weisblatt, Emma; Green, Jonathan; Papanikolaou, Katerina; Baird, Gillian; Bailey, Anthony J

2015-10-01

Clinical genetic studies confirm the broader autism phenotype (BAP) in some relatives of individuals with autism, but there are few standardized assessment measures. We developed three BAP measures (informant interview, self-report interview, and impression of interviewee observational scale) and describe the development strategy and findings from the interviews. International Molecular Genetic Study of Autism Consortium data were collected from families containing at least two individuals with autism. Comparison of the informant and self-report interviews was restricted to samples in which the interviews were undertaken by different researchers from that site (251 UK informants, 119 from the Netherlands). Researchers produced vignettes that were rated blind by others. Retest reliability was assessed in 45 participants. Agreement between live scoring and vignette ratings was very high. Retest stability for the interviews was high. Factor analysis indicated a first factor comprising social-communication items and rigidity (but not other repetitive domain items), and a second factor comprised mainly of reading and spelling impairments. Whole scale Cronbach's alphas were high for both interviews. The correlation between interviews for factor 1 was moderate (adult items 0.50; childhood items 0.43); Kappa values for between-interview agreement on individual items were mainly low. The correlations between individual items and total score were moderate. The inclusion of several factor 2 items lowered the overall Cronbach's alpha for the total set. Both interview measures showed good reliability and substantial stability over time, but the findings were better for factor 1 than factor 2. We recommend factor 1 scores be used for characterising the BAP. © 2015 The Authors Autism Research published by Wiley Periodicals, Inc. on behalf of International Society for Autism Research.

Transmission electron microscopy investigation of Bi-2223/Ag tapes

DEFF Research Database (Denmark)

Andersen, L.G.; Bals, S.; Tendeloo, G. Van

2001-01-01

during the tape processing, (3) a study of the grain boundaries on an atomic scale, including intergrowth investigations. Tapes with different process parameters have been compared with respect to the microstructure. A fully processed tape has on the average 50% thicker Bi-2223 grains than a tape after......The microstructure of (Bi,Pb)(2)Sr2Ca2CuOx (Bi-2223) tapes has been investigated by means of transmission electron microscopy (TEM) and high-resolution TEM. The emphasis has been placed on: (1) an examination of the grain morphology and size, (2) grain and colony boundary angles, which are formed...

Audio Recording of Children with Dyslalia

OpenAIRE

Stefan Gheorghe Pentiuc; Maria D. Schipor; Ovidiu A. Schipor

2008-01-01

In this paper we present our researches regarding automat parsing of audio recordings. These recordings are obtained from children with dyslalia and are necessary for an accurate identification of speech problems. We develop a software application that helps parsing audio, real time, recordings.

Parametric time-frequency domain spatial audio

CERN Document Server

Delikaris-Manias, Symeon; Politis, Archontis

2018-01-01

This book provides readers with the principles and best practices in spatial audio signal processing. It describes how sound fields and their perceptual attributes are captured and analyzed within the time-frequency domain, how essential representation parameters are coded, and how such signals are efficiently reproduced for practical applications. The book is split into four parts starting with an overview of the fundamentals. It then goes on to explain the reproduction of spatial sound before offering an examination of signal-dependent spatial filtering. The book finishes with coverage of both current and future applications and the direction that spatial audio research is heading in. Parametric Time-frequency Domain Spatial Audio focuses on applications in entertainment audio, including music, home cinema, and gaming--covering the capturing and reproduction of spatial sound as well as its generation, transduction, representation, transmission, and perception. This book will teach readers the tools needed...

Predicting the Overall Spatial Quality of Automotive Audio Systems

Science.gov (United States)

Koya, Daisuke

The spatial quality of automotive audio systems is often compromised due to their unideal listening environments. Automotive audio systems need to be developed quickly due to industry demands. A suitable perceptual model could evaluate the spatial quality of automotive audio systems with similar reliability to formal listening tests but take less time. Such a model is developed in this research project by adapting an existing model of spatial quality for automotive audio use. The requirements for the adaptation were investigated in a literature review. A perceptual model called QESTRAL was reviewed, which predicts the overall spatial quality of domestic multichannel audio systems. It was determined that automotive audio systems are likely to be impaired in terms of the spatial attributes that were not considered in developing the QESTRAL model, but metrics are available that might predict these attributes. To establish whether the QESTRAL model in its current form can accurately predict the overall spatial quality of automotive audio systems, MUSHRA listening tests using headphone auralisation with head tracking were conducted to collect results to be compared against predictions by the model. Based on guideline criteria, the model in its current form could not accurately predict the overall spatial quality of automotive audio systems. To improve prediction performance, the QESTRAL model was recalibrated and modified using existing metrics of the model, those that were proposed from the literature review, and newly developed metrics. The most important metrics for predicting the overall spatial quality of automotive audio systems included those that were interaural cross-correlation (IACC) based, relate to localisation of the frontal audio scene, and account for the perceived scene width in front of the listener. Modifying the model for automotive audio systems did not invalidate its use for domestic audio systems. The resulting model predicts the overall spatial

Perceived Organizational Red Tape and Organizational Performance in Public Services

DEFF Research Database (Denmark)

Jacobsen, Christian Bøtcher; Jakobsen, Mads Leth

2018-01-01

The claim that perceived organizational red tape hampers public services has become a central theme in public administration research. Surprisingly, however, few scholars have empirically examined the impact of perceived red tape on organizational performance. This study empirically analyzes how...... perceived organizational red tape among managers and frontline staff relates to objectively measured performance. The data consists of survey responses from teachers and principals at Danish upper secondary schools combined with grade-level administrative performance data. Based on theories of red tape...... and motivation crowding, we hypothesize that perceived organizational red tape reduces performance within such organizations. The empirical result is a small, negative relationship between staff perception of red tape and performance, and no relationship between manager-perceived red tape and performance....

Being a quantitative interviewer: qualitatively exploring interviewers' experiences in a longitudinal cohort study

Directory of Open Access Journals (Sweden)

Derrett Sarah

2011-12-01

Full Text Available Abstract Background Many studies of health outcomes rely on data collected by interviewers administering highly-structured (quantitative questionnaires to participants. Little appears to be known about the experiences of such interviewers. This paper explores interviewer experiences of working on a longitudinal study in New Zealand (the Prospective Outcomes of injury Study - POIS. Interviewers administer highly-structured questionnaires to participants, usually by telephone, and enter data into a secure computer program. The research team had expectations of interviewers including: consistent questionnaire administration, timeliness, proportions of potential participants recruited and an empathetic communication style. This paper presents results of a focus group to qualitatively explore with the team of interviewers their experiences, problems encountered, strategies, support systems used and training. Methods A focus group with interviewers involved in the POIS interviews was held; it was audio-recorded and transcribed. The analytical method was thematic, with output intended to be descriptive and interpretive. Results Nine interviewers participated in the focus group (average time in interviewer role was 31 months. Key themes were: 1 the positive aspects of the quantitative interviewer role (i.e. relationships and resilience, insights gained, and participants' feedback, 2 difficulties interviewers encountered and solutions identified (i.e. stories lost or incomplete, forgotten appointments, telling the stories, acknowledging distress, stories reflected and debriefing and support, and 3 meeting POIS researcher expectations (i.e. performance standards, time-keeping, dealing exclusively with the participant and maintaining privacy. Conclusions Interviewers demonstrated great skill in the way they negotiated research team expectations whilst managing the relationships with participants. Interviewers found it helpful to have a research protocol in

Editing Audio with Audacity

Directory of Open Access Journals (Sweden)

Brandon Walsh

2016-08-01

Full Text Available For those interested in audio, basic sound editing skills go a long way. Being able to handle and manipulate the materials can help you take control of your object of study: you can zoom in and extract particular moments to analyze, process the audio, and upload the materials to a server to compliment a blog post on the topic. On a more practical level, these skills could also allow you to record and package recordings of yourself or others for distribution. That guest lecture taking place in your department? Record it and edit it yourself! Doing so is a lightweight way to distribute resources among various institutions, and it also helps make the materials more accessible for readers and listeners with a wide variety of learning needs. In this lesson you will learn how to use Audacity to load, record, edit, mix, and export audio files. Sound editing platforms are often expensive and offer extensive capabilities that can be overwhelming to the first-time user, but Audacity is a free and open source alternative that offers powerful capabilities for sound editing with a low barrier for entry. For this lesson we will work with two audio files: a recording of Bach’s Goldberg Variations available from MusOpen and another recording of your own voice that will be made in the course of the lesson. This tutorial uses Audacity 2.1.2, released January 2016.

Systematic Review of the Effect of Taping Techniques on Patellofemoral Pain Syndrome.

Science.gov (United States)

Logan, Catherine A; Bhashyam, Abhiram R; Tisosky, Ashley J; Haber, Daniel B; Jorgensen, Anna; Roy, Adam; Provencher, Matthew T

Taping is commonly used in the management of several musculoskeletal conditions, including patellofemoral pain syndrome (PFPS). Specific guidelines for taping are unknown. To investigate the efficacy of knee taping in the management of PFPS. Our hypothesis was that tension taping and exercise would be superior to placebo taping and exercise as well as to exercise or taping alone. The PubMed/MEDLINE, Cochrane, Rehabilitation and Sports Medicine Source, and CINAHL databases were reviewed for English-language randomized controlled trials (RCTs) evaluating the efficacy of various taping techniques that were published between 1995 and April 2015. Keywords utilized included taping, McConnell, kinesio-taping, kinesiotaping, patellofemoral pain, and knee. Studies included consisted of RCTs (level 1 or 2) with participants of all ages who had anterior knee or patellofemoral pain symptoms and had received nonsurgical management using any taping technique. Systematic review. Level 2. A checklist method was used to determine selection, performance, detection, and attrition bias for each article. A quality of evidence grading was then referenced using the validated PEDro database for RCTs. Three difference comparison groups were compared: tension taping and exercise versus placebo taping and exercise (group 1), placebo taping and exercise versus exercise alone (group 2), and tension taping and exercise versus taping alone (group 3). Five RCTs with 235 total patients with multiple intervention arms were included. Taping strategies included McConnell and Kinesiotaping. Visual analog scale (VAS) scores indicated improvement in all 3 comparison groups (group 1: 91 patients, 39% of total, mean VAS improvement 44.9 [tension taping + exercise] vs 66 [placebo taping + exercise]; group 2: 56 patients, 24% of total, mean VAS improvement 66 [placebo taping + exercise] vs 47.6 [exercise alone]; and group 3: 112 patients, 48% of total, mean VAS improvement 44.9 [tension taping + exercise

Fusion for Audio-Visual Laughter Detection

NARCIS (Netherlands)

Reuderink, B.

2007-01-01

Laughter is a highly variable signal, and can express a spectrum of emotions. This makes the automatic detection of laughter a challenging but interesting task. We perform automatic laughter detection using audio-visual data from the AMI Meeting Corpus. Audio-visual laughter detection is performed

AudioPairBank: Towards A Large-Scale Tag-Pair-Based Audio Content Analysis

OpenAIRE

Sager, Sebastian; Elizalde, Benjamin; Borth, Damian; Schulze, Christian; Raj, Bhiksha; Lane, Ian

2016-01-01

Recently, sound recognition has been used to identify sounds, such as car and river. However, sounds have nuances that may be better described by adjective-noun pairs such as slow car, and verb-noun pairs such as flying insects, which are under explored. Therefore, in this work we investigate the relation between audio content and both adjective-noun pairs and verb-noun pairs. Due to the lack of datasets with these kinds of annotations, we collected and processed the AudioPairBank corpus cons...

Tourism research and audio methods

DEFF Research Database (Denmark)

Jensen, Martin Trandberg

2016-01-01

• Audio methods enriches sensuous tourism ethnographies. • The note suggests five research avenues for future auditory scholarship. • Sensuous tourism research has neglected the role of sounds in embodied tourism experiences.......• Audio methods enriches sensuous tourism ethnographies. • The note suggests five research avenues for future auditory scholarship. • Sensuous tourism research has neglected the role of sounds in embodied tourism experiences....

Melt formed superconducting joint between superconducting tapes

International Nuclear Information System (INIS)

Benz, M.G.; Knudsen, B.A.; Rumaner, L.E.; Zaabala, R.J.

1992-01-01

This patent describes a superconducting joint between contiguous superconducting tapes having an inner laminate comprised of a parent-metal layer selected from the group niobium, tantalum, technetium, and vanadium, a superconductive intermetallic compound layer on the parent-metal layer, a reactive-metal layer that is capable of combining with the parent-metal and forming the superconductive intermetallic compound, the joint comprising: a continuous precipitate of the superconductive intermetallic compound fused to the tapes forming a continuous superconducting path between the tapes

DAFX Digital Audio Effects

CERN Document Server

Zö

2011-01-01

The rapid development in various fields of Digital Audio Effects, or DAFX, has led to new algorithms and this second edition of the popular book, DAFX: Digital Audio Effects has been updated throughout to reflect progress in the field. It maintains a unique approach to DAFX with a lecture-style introduction into the basics of effect processing. Each effect description begins with the presentation of the physical and acoustical phenomena, an explanation of the signal processing techniques to achieve the effect, followed by a discussion of musical applications and the control of effect parameter

Microstructure and superconducting properties of Bi-2223/Ag tapes fabricated in the two-step sintering process

International Nuclear Information System (INIS)

Lu, X.Y.; Nagata, A.; Sugawara, K.

2008-01-01

The microstructure and superconducting properties of Bi-2223/Ag tapes fabricated in the two-step sintering process were investigated. The tapes were then subjected to two heat treatments with an intermediate rolling. All the tapes were sintered at 835 deg. C for 24 h at initial sintering stage. A two-step sintering procedure was then used in the final sintering stage. In the first step, the tapes are sintered at 840-865 deg. C for 1 h. In the second step, they were sintered at 835 deg. C for 120 h. The results show that the first step sintering temperature has significant influence on the microstructure and the critical current density J c . The observed microstructures are consistent well with the different J c performances of the tapes first-step-sintered at different temperatures. The tape first-step-sintered at 850 deg. C, which has small secondary phases, stronger c-axis grain alignment, higher proportion of Bi-2223 phase, and no cracks, exhibits the highest J c value

AUTOMATIC SEGMENTATION OF BROADCAST AUDIO SIGNALS USING AUTO ASSOCIATIVE NEURAL NETWORKS

Directory of Open Access Journals (Sweden)

P. Dhanalakshmi

2010-12-01

Full Text Available In this paper, we describe automatic segmentation methods for audio broadcast data. Today, digital audio applications are part of our everyday lives. Since there are more and more digital audio databases in place these days, the importance of effective management for audio databases have become prominent. Broadcast audio data is recorded from the Television which comprises of various categories of audio signals. Efficient algorithms for segmenting the audio broadcast data into predefined categories are proposed. Audio features namely Linear prediction coefficients (LPC, Linear prediction cepstral coefficients, and Mel frequency cepstral coefficients (MFCC are extracted to characterize the audio data. Auto Associative Neural Networks are used to segment the audio data into predefined categories using the extracted features. Experimental results indicate that the proposed algorithms can produce satisfactory results.

Multiple Generations on Video Tape Recorders.

Science.gov (United States)

Wiens, Jacob H.

Helical scan video tape recorders were tested for their dubbing characteristics in order to make selection data available to media personnel. The equipment, two recorders of each type tested, was submitted by the manufacturers. The test was designed to produce quality evaluations for three generations of a single tape, thereby encompassing all…

47 CFR 10.520 - Common audio attention signal.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Common audio attention signal. 10.520 Section... Equipment Requirements § 10.520 Common audio attention signal. A Participating CMS Provider and equipment manufacturers may only market devices for public use under part 10 that include an audio attention signal that...

The augmentation of heat transfer in a pipe flow using a swirling perforated twisted (SPT) tape insert

Science.gov (United States)

Ahmad, Shahrokh; Oishe, Sadia Noon; Rahman, Md. Lutfor

2017-12-01

The purpose of this research work is to increase the heat transfer coefficient by operating the heat exchangers at smaller revolution per minute. This signifies an achievement of reduction of pressure drop corresponding to less operating cost. This study has used two types of SPT tape insert to observe the various heat transfer coefficient, heat transfer rate and heat transfer augmentation efficiency. One tape was fully twisted and another tape was partially twisted. The shape of the SPT tape creates turbulence effect. The turbulence flow (swirl flow) generated by SPT tape promotes greater mixing and high heat transfer coefficients. An arrangement scheme has been developed for the experimental investigation. For remarking the rate of change of heat transfer, temperature has been measured numerically through the temperature sensors with various flow rates and RPM. The volume flow rate was varied from 10.3448276 LPM to 21.045574 LPM and the rotation of the perforated twisted tape was varied from 50 RPM to 400 RPM. Finally the research study demonstrates the effectiveness of the results of the proposed approaches. It is observed that the suggested method of heat transfer augmentations is much more effective than existing methods, since it results in an increase in heat transfer area and also an increase in the heat transfer coefficient and reduction of cost in the industrial sectors.

Audio Recording of Children with Dyslalia

Directory of Open Access Journals (Sweden)

Stefan Gheorghe Pentiuc

2008-01-01

Full Text Available In this paper we present our researches regarding automat parsing of audio recordings. These recordings are obtained from children with dyslalia and are necessary for an accurate identification of speech problems. We develop a software application that helps parsing audio, real time, recordings.

Bidirectional recording performance of a perpendicular evaporated Co-CoO tape

Energy Technology Data Exchange (ETDEWEB)

Motohashi, K. [Sony Corporation, 3-4-1 Sakuragi, Tagajo-shi, Miyagi 985-0842 (Japan)], E-mail: Kazunari.Motohashi@jp.sony.com; Ikeda, N.; Sato, T.; Shiga, D.; Ono, H.; Onodera, S. [Sony Corporation, 3-4-1 Sakuragi, Tagajo-shi, Miyagi 985-0842 (Japan)

2008-11-15

It is the first report on the recording performance of a perpendicular metal evaporated (ME) tape measured with a giant magnetoresistive head. To solve the application difficulty of oblique evaporated tape media to linear scan tape systems, a perpendicular evaporated Co-CoO tape was proposed instead. The prepared sample showed perpendicular anisotropy with coercivity of 107.3 kA/m, M{sub r}t of 3.9 mA and squareness of 0.25. Identical recording characteristics were obtained for both head-media moving directions, which enables the application of perpendicular evaporated Co-CoO tape to linear scan tape systems. The better carrier-to-noise ratio was also confirmed by comparison with a current advanced product of metal particulate tape, which can realize the higher recording density of linear scan tape systems using ME tape.

Bidirectional recording performance of a perpendicular evaporated Co-CoO tape

International Nuclear Information System (INIS)

Motohashi, K.; Ikeda, N.; Sato, T.; Shiga, D.; Ono, H.; Onodera, S.

2008-01-01

It is the first report on the recording performance of a perpendicular metal evaporated (ME) tape measured with a giant magnetoresistive head. To solve the application difficulty of oblique evaporated tape media to linear scan tape systems, a perpendicular evaporated Co-CoO tape was proposed instead. The prepared sample showed perpendicular anisotropy with coercivity of 107.3 kA/m, M r t of 3.9 mA and squareness of 0.25. Identical recording characteristics were obtained for both head-media moving directions, which enables the application of perpendicular evaporated Co-CoO tape to linear scan tape systems. The better carrier-to-noise ratio was also confirmed by comparison with a current advanced product of metal particulate tape, which can realize the higher recording density of linear scan tape systems using ME tape

Virtual Microphones for Multichannel Audio Resynthesis

Directory of Open Access Journals (Sweden)

Athanasios Mouchtaris

2003-09-01

Full Text Available Multichannel audio offers significant advantages for music reproduction, including the ability to provide better localization and envelopment, as well as reduced imaging distortion. On the other hand, multichannel audio is a demanding media type in terms of transmission requirements. Often, bandwidth limitations prohibit transmission of multiple audio channels. In such cases, an alternative is to transmit only one or two reference channels and recreate the rest of the channels at the receiving end. Here, we propose a system capable of synthesizing the required signals from a smaller set of signals recorded in a particular venue. These synthesized “virtual” microphone signals can be used to produce multichannel recordings that accurately capture the acoustics of that venue. Applications of the proposed system include transmission of multichannel audio over the current Internet infrastructure and, as an extension of the methods proposed here, remastering existing monophonic and stereophonic recordings for multichannel rendering.

Cultural Systems and Land Use Decision Making.

Science.gov (United States)

Schaefer, Larry; Pressman, Rob

This material includes student guide sheets, reference material, and tape script for the audio-tutorial unit on Cultural Systems. An audio tape is used with the materials. The material is designed for use with Connecticut schools, but can be adapted to other localities. The materials in this unit consider components of cultural systems, land use…

Das Sprachlabor in der Schule (The Language Laboratory in Schools).

Science.gov (United States)

Cabus, Hans-Joachim; Freudenstein, Reinhold

This technical manual for the use of language laboratories includes information on the following topics: (1) types of laboratories, (2) the tape, (3) the tape recorder, (4) other basic technical equipment, (5) the audio-active laboratory, the audio-active-compare laboratory, and an evaluation of the two, (6) possibilities for expanded use, (7)…

Music Genre Classification Using MIDI and Audio Features

Science.gov (United States)

Cataltepe, Zehra; Yaslan, Yusuf; Sonmez, Abdullah

2007-12-01

We report our findings on using MIDI files and audio features from MIDI, separately and combined together, for MIDI music genre classification. We use McKay and Fujinaga's 3-root and 9-leaf genre data set. In order to compute distances between MIDI pieces, we use normalized compression distance (NCD). NCD uses the compressed length of a string as an approximation to its Kolmogorov complexity and has previously been used for music genre and composer clustering. We convert the MIDI pieces to audio and then use the audio features to train different classifiers. MIDI and audio from MIDI classifiers alone achieve much smaller accuracies than those reported by McKay and Fujinaga who used not NCD but a number of domain-based MIDI features for their classification. Combining MIDI and audio from MIDI classifiers improves accuracy and gets closer to, but still worse, accuracies than McKay and Fujinaga's. The best root genre accuracies achieved using MIDI, audio, and combination of them are 0.75, 0.86, and 0.93, respectively, compared to 0.98 of McKay and Fujinaga. Successful classifier combination requires diversity of the base classifiers. We achieve diversity through using certain number of seconds of the MIDI file, different sample rates and sizes for the audio file, and different classification algorithms.

Realtime Audio with Garbage Collection

OpenAIRE

Matheussen, Kjetil Svalastog

2010-01-01

Two non-moving concurrent garbage collectors tailored for realtime audio processing are described. Both collectors work on copies of the heap to avoid cache misses and audio-disruptive synchronizations. Both collectors are targeted at multiprocessor personal computers. The first garbage collector works in uncooperative environments, and can replace Hans Boehm's conservative garbage collector for C and C++. The collector does not access the virtual memory system. Neither doe...

Audio-Visual Classification of Sports Types

DEFF Research Database (Denmark)

Gade, Rikke; Abou-Zleikha, Mohamed; Christensen, Mads Græsbøll

2015-01-01

In this work we propose a method for classification of sports types from combined audio and visual features ex- tracted from thermal video. From audio Mel Frequency Cepstral Coefficients (MFCC) are extracted, and PCA are applied to reduce the feature space to 10 dimensions. From the visual modali...

"Abomination"--life as a Bible belt gay.

Science.gov (United States)

Barton, Bernadette

2010-01-01

Drawing on observation, autoethnography, and audio-taped interviews, this article explores the religious backgrounds and experiences of Bible Belt gays. In the Bible Belt, Christianity is not confined to Sunday worship. Christian crosses, messages, paraphernalia, music, news, and attitudes permeate everyday settings. Consequently, Christian fundamentalist dogma about homosexuality-that homosexuals are bad, diseased, perverse, sinful, other, and inferior-is cumulatively bolstered within a variety of other social institutions and environments in the Bible Belt. Of the 46 lesbians and gay men interviewed for this study (age 18-74 years), most describe living through spirit-crushing experiences of isolation, abuse, and self-loathing. This article argues that the geographic region of the Bible Belt intersects with religious-based homophobia. Informants explained that negative social attitudes about homosexuality caused a range of harmful consequences in their lives including the fear of going to hell, depression, low self-esteem, and feelings of worthlessness.

Evidence-informed health policy 3 - interviews with the directors of organizations that support the use of research evidence.

Science.gov (United States)

Lavis, John N; Oxman, Andrew D; Moynihan, Ray; Paulsen, Elizabeth J

2008-12-17

Only a small number of previous efforts to describe the experiences of organizations that produce clinical practice guidelines (CPGs), undertake health technology assessments (HTAs), or directly support the use of research evidence in developing health policy (i.e., government support units, or GSUs) have relied on interviews and then only with HTA agencies. Interviews offer the potential for capturing experiences in great depth, particularly the experiences of organizations that may be under-represented in surveys. We purposively sampled organizations from among those who completed a questionnaire in the first phase of our three-phase study, developed and piloted a semi-structured interview guide, and conducted the interviews by telephone, audio-taped them, and took notes simultaneously. Binary or categorical responses to more structured questions were counted when possible. Themes were identified from among responses to semi-structured questions using a constant comparative method of analysis. Illustrative quotations were identified to supplement the narrative description of the themes. We interviewed the director (or his or her nominee) in 25 organizations, of which 12 were GSUs. Using rigorous methods that are systematic and transparent (sometimes shortened to 'being evidence-based') was the most commonly cited strength among all organizations. GSUs more consistently described their close links with policymakers as a strength, whereas organizations producing CPGs, HTAs, or both had conflicting viewpoints about such close links. With few exceptions, all types of organizations tended to focus largely on weaknesses in implementation, rather than strengths. The advice offered to those trying to establish similar organizations include: 1) collaborate with other organizations; 2) establish strong links with policymakers and stakeholders; 3) be independent and manage conflicts of interest; 4) build capacity; 5) use good methods and be transparent; 6) start small and

Comparison of Linear Prediction Models for Audio Signals

Directory of Open Access Journals (Sweden)

2009-03-01

Full Text Available While linear prediction (LP has become immensely popular in speech modeling, it does not seem to provide a good approach for modeling audio signals. This is somewhat surprising, since a tonal signal consisting of a number of sinusoids can be perfectly predicted based on an (all-pole LP model with a model order that is twice the number of sinusoids. We provide an explanation why this result cannot simply be extrapolated to LP of audio signals. If noise is taken into account in the tonal signal model, a low-order all-pole model appears to be only appropriate when the tonal components are uniformly distributed in the Nyquist interval. Based on this observation, different alternatives to the conventional LP model can be suggested. Either the model should be changed to a pole-zero, a high-order all-pole, or a pitch prediction model, or the conventional LP model should be preceded by an appropriate frequency transform, such as a frequency warping or downsampling. By comparing these alternative LP models to the conventional LP model in terms of frequency estimation accuracy, residual spectral flatness, and perceptual frequency resolution, we obtain several new and promising approaches to LP-based audio modeling.

Preparing superconducting nanopowder based YBCO/Ag tapes

DEFF Research Database (Denmark)

Paturi, P.; Raittila, J.; Grivel, J.C.

2002-01-01

YBCO nanopowder consisting of 1-3 nm thick and 40 nm wide particles has been used to make silver clad superconducting tapes. After annealing in nitrogen at 945 degreesC for 10 h a critical current of 5.02 A (3300 A/cm(2)) was attained, Annealing in mixed atmosphere of oxygen and nitrogen was also...... carried out and this procedure produced tapes with a critical current of 2.83 A (2200 A/cm(2)). These tapes show very good characteristics in magnetic fields. (C) 2002 Elsevier Science B.V. All rights reserved....

CERN automatic audio-conference service

International Nuclear Information System (INIS)

Sierra Moral, Rodrigo

2010-01-01

Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.

CERN automatic audio-conference service

Energy Technology Data Exchange (ETDEWEB)

Sierra Moral, Rodrigo, E-mail: Rodrigo.Sierra@cern.c [CERN, IT Department 1211 Geneva-23 (Switzerland)

2010-04-01

Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.

CERN automatic audio-conference service

Science.gov (United States)

Sierra Moral, Rodrigo

2010-04-01

Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.

Near-field Localization of Audio

DEFF Research Database (Denmark)

Jensen, Jesper Rindom; Christensen, Mads Græsbøll

2014-01-01

Localization of audio sources using microphone arrays has been an important research problem for more than two decades. Many traditional methods for solving the problem are based on a two-stage procedure: first, information about the audio source, such as time differences-of-arrival (TDOAs......) and gain ratios-of-arrival (GROAs) between microphones is estimated, and, second, this knowledge is used to localize the audio source. These methods often have a low computational complexity, but this comes at the cost of a limited estimation accuracy. Therefore, we propose a new localization approach......, where the desired signal is modeled using TDOAs and GROAs, which are determined by the source location. This facilitates the derivation of one-stage, maximum likelihood methods under a white Gaussian noise assumption that is applicable in both near- and far-field scenarios. Simulations show...

Fabrication and Characterization of Graded Anodes for Anode-Supported Solid Oxide Fuel Cells by Tape Casting and Lamination

DEFF Research Database (Denmark)

Beltran-Lopez, J.F.; Laguna-Bercero, M.A.; Gurauskis, Jonas

2014-01-01

Graded anodes for anode-supported solid oxide fuel cells (SOFCs) are fabricated by tape casting and subsequent cold lamination of plates using different compositions. Rheological parameters are adjusted to obtain stable suspensions for tape casting. The conditions for the tape casting and laminat......Graded anodes for anode-supported solid oxide fuel cells (SOFCs) are fabricated by tape casting and subsequent cold lamination of plates using different compositions. Rheological parameters are adjusted to obtain stable suspensions for tape casting. The conditions for the tape casting...... and lamination will be described. Flexural strength of the reduced cermets measured using three-point bending configuration is 468±37MPa. The graded anode supports are characterized by scanning electron microscope observations, mercury porosimetry intrusion, and resistivity measurements, showing an adequate...... of tapes at room temperature without using plasticizers. This is made by the combination of two different binders with varying Tg (glass transition temperature) which resulted in plastic deformation at room temperature. Those results indicate that the proposed process is a cost-effective method...

Gateway of Sound: Reassessing the Role of Audio Mastering in the Art of Record Production

Directory of Open Access Journals (Sweden)

Carlo Nardi

2014-06-01

Full Text Available Audio mastering, notwithstanding an apparent lack of scholarly attention, is a crucial gateway between production and consumption and, as such, is worth further scrutiny, especially in music genres like house or techno, which place great emphasis on sound production qualities. In this article, drawing on personal interviews with mastering engineers and field research in mastering studios in Italy and Germany, I investigate the practice of mastering engineering, paying close attention to the negotiation of techniques and sound aesthetics in relation to changes in the industry formats and, in particular, to the growing shift among DJs from vinyl to compressed digital formats. I then discuss the specificity of audio mastering in relation to EDM, insofar as DJs and controllerists conceive of the master, rather than as a finished product destined to listening, as raw material that can be reworked in performance.

Musical Audio Synthesis Using Autoencoding Neural Nets

OpenAIRE

Sarroff, Andy; Casey, Michael A.

2014-01-01

With an optimal network topology and tuning of hyperpa-\\ud rameters, artificial neural networks (ANNs) may be trained\\ud to learn a mapping from low level audio features to one\\ud or more higher-level representations. Such artificial neu-\\ud ral networks are commonly used in classification and re-\\ud gression settings to perform arbitrary tasks. In this work\\ud we suggest repurposing autoencoding neural networks as\\ud musical audio synthesizers. We offer an interactive musi-\\ud cal audio synt...

Fabrication of Polyimide-Matrix/Carbon and Boron-Fiber Tape

Science.gov (United States)

Belvin, Harry L.; Cano, Roberto J.; Treasure, Monte; Shahood, Thomas W.

2007-01-01

The term HYCARB denotes a hybrid composite of polyimide matrices reinforced with carbon and boron fibers. HYCARB and an improved process for fabricating dry HYCARB tapes have been invented in a continuing effort to develop lightweight, strong composite materials for aerospace vehicles. Like other composite tapes in this line of development, HYCARB tapes are intended to be used to build up laminated structures having possibly complex shapes by means of automated tow placement (ATP) - a process in which a computer-controlled multiaxis machine lays down prepreg tape or tows. The special significance of the present process for making dry HYCARB for ATP is that it contributes to the reduction of the overall cost of manufacturing boron-reinforced composite-material structures while making it possible to realize increased compression strengths. The present process for making HYCARB tapes incorporates a "wet to dry" process developed previously at Langley Research Center. In the "wet to dry" process, a flattened bundle of carbon fiber tows, pulled along a continuous production line between pairs of rollers, is impregnated with a solution of a poly(amide acid) in N-methyl-2-pyrrolidinone (NMP), then most of the NMP is removed by evaporation in hot air. In the present case, the polyamide acid is, more specifically, that of LaRC. IAX (or equivalent) thermoplastic polyimide, and the fibers are, more specifically, Manganite IM7 (or equivalent) polyacrylonitrile- based carbon filaments that have a diameter of 5.2 m and are supplied in 12,000-filament tows. The present process stands in contrast to a prior process in which HYCARB tape was made by pressing boron fibers into the face of a wet carbon-fiber/ poly(amide acid) prepreg tape . that is, a prepreg tape from which the NMP solvent had not been removed. In the present process, one or more layer(s) of side-by-side boron fibers are pressed between dry prepreg tapes that have been prepared by the aforementioned gwet to dry h

TIROA/NOAA (Television and Infrared Observation Satellite/National Oceanic and Atmospheric Administration) satellites space environment monitor archive tape documentation: 1988 update. Technical memo

International Nuclear Information System (INIS)

Hill, V.J.; Evans, D.S.; Sauer, H.H.

1988-05-01

TIROS/NOAA satellite archive tapes containing data obtained with the Medium-Energy Proton and Electron Detector (MEPED), High-Energy Proton and Alpha-Particle Detector (HEPAD), and Total-Energy Detector (TED) are described. Descriptions of the data include orbital and housekeeping details and the information needed to decode and understand the data. Specifications of the data channels are supplied, with the timing information needed to convert the data to usable information. Description of the archive tape format gives the information needed to read the tape and unpack the data. Appendices supply the retrieval routines used by the Space Environment Services Center in Boulder

Spatial audio reproduction with primary ambient extraction

CERN Document Server

He, JianJun

2017-01-01

This book first introduces the background of spatial audio reproduction, with different types of audio content and for different types of playback systems. A literature study on the classical and emerging Primary Ambient Extraction (PAE) techniques is presented. The emerging techniques aim to improve the extraction performance and also enhance the robustness of PAE approaches in dealing with more complex signals encountered in practice. The in-depth theoretical study helps readers to understand the rationales behind these approaches. Extensive objective and subjective experiments validate the feasibility of applying PAE in spatial audio reproduction systems. These experimental results, together with some representative audio examples and MATLAB codes of the key algorithms, illustrate clearly the differences among various approaches and also help readers gain insights on selecting different approaches for different applications.

Experimental Tape Casting of Adjacently Graded Materials for Magnetic Refrigeration

DEFF Research Database (Denmark)

Bulatova, Regina

encompass modification of the entire tape caster into a multi chamber unit, establishment of the optimal operating parameters such as casting gap, speed, and slurry level in the tape caster reservoir, and elucidation of the impact of chamber partition design on the quality of the final tape. The second...... of the side-by-side tape casting technique: recognising critical parameters which affect the quality of a graded tape, shape and position of the interface area. Studied parameters can be divided into two categories: operational parameters and slurry formulation optimisation. The operational parameters...

Music Genre Classification Using MIDI and Audio Features

Directory of Open Access Journals (Sweden)

Abdullah Sonmez

2007-01-01

Full Text Available We report our findings on using MIDI files and audio features from MIDI, separately and combined together, for MIDI music genre classification. We use McKay and Fujinaga's 3-root and 9-leaf genre data set. In order to compute distances between MIDI pieces, we use normalized compression distance (NCD. NCD uses the compressed length of a string as an approximation to its Kolmogorov complexity and has previously been used for music genre and composer clustering. We convert the MIDI pieces to audio and then use the audio features to train different classifiers. MIDI and audio from MIDI classifiers alone achieve much smaller accuracies than those reported by McKay and Fujinaga who used not NCD but a number of domain-based MIDI features for their classification. Combining MIDI and audio from MIDI classifiers improves accuracy and gets closer to, but still worse, accuracies than McKay and Fujinaga's. The best root genre accuracies achieved using MIDI, audio, and combination of them are 0.75, 0.86, and 0.93, respectively, compared to 0.98 of McKay and Fujinaga. Successful classifier combination requires diversity of the base classifiers. We achieve diversity through using certain number of seconds of the MIDI file, different sample rates and sizes for the audio file, and different classification algorithms.

ac loss and dc critical current densities of Nb3Sn tapes by the solid state diffusion process

International Nuclear Information System (INIS)

Suenaga, M.; Klamut, C.; Bussiere, J.F.

1976-01-01

The effects of metallurgical processing on 60 Hz ac losses and dc critical currents in Nb 3 Sn tapes fabricated by the solid state diffusion technique were investigated. An addition of Al to the Cu--Sn alloy for the matrix resulted in large reduction in the ac losses of Nb 3 Sn tapes, but the highest linear critical current densities were observed in Nb 3 Sn tapes produced with a Nb-1 wt percent Zr core in a Cu-13 wt percent Sn matrix. Values of the losses and the critical currents in these tapes can meet the present requirements for the ac superconducting power cables

Delegation: a solution to the workload problem? Observations and interviews with community pharmacists in England.

Science.gov (United States)

Lea, Victoria M; Corlett, Sarah A; Rodgers, Ruth M

2016-05-01

This study aims to describe how pharmacists utilise and perceive delegation in the community setting. Non-participant observations and semi-structured interviews with a convenience sample of community pharmacists working in Kent between July and October 2011. Content analysis was undertaken to determine key themes and the point of theme saturation informed sample size. Findings from observations were also compared against those from interviews. Observations and interviews were undertaken with 11 pharmacists. Observations showed that delegation occurred in four different forms: assumed, active, partial and reverse. It was also employed to varying extents within the different pharmacies. Interviews revealed mixed views on delegation. Some pharmacists presented positive attitudes towards delegation while others were concerned about maintaining accountability for delegated tasks, particularly in terms of accuracy checking of dispensed medication. Other pharmacists noted the ability to delegate was not a skill they found inherently easy. Comparison of observation and interview data highlighted discrepancies between tasks pharmacists perceived they delegated and what they actually delegated. Effective delegation can potentially promote better management of workload to provide pharmacists with additional time to spend on cognitive pharmaceutical services. To do this, pharmacists' reluctance to delegate must be addressed. Lack of insight into own practice might be helped by self-reflection and feedback from staff. Also, a greater understanding of legal accountability in the context of delegation needs to be achieved. Finally, delegation is not just dependent on pharmacists, but also on support staff; ensuring staff are empowered and equipped to take on delegated roles is essential. © 2015 Royal Pharmaceutical Society.

Current-Driven Switch-Mode Audio Power Amplifiers

DEFF Research Database (Denmark)

Knott, Arnold; Buhl, Niels Christian; Andersen, Michael A. E.

2012-01-01

The conversion of electrical energy into sound waves by electromechanical transducers is proportional to the current through the coil of the transducer. However virtually all audio power amplifiers provide a controlled voltage through the interface to the transducer. This paper is presenting...... a switch-mode audio power amplifier not only providing controlled current but also being supplied by current. This results in an output filter size reduction by a factor of 6. The implemented prototype shows decent audio performance with THD + N below 0.1 %....

Tamper tape seals

International Nuclear Information System (INIS)

Wright, B.W.; Undem, H.A.

1994-07-01

Tamper tapes are appealing for many applications due to their ease of use and relative robustness. Applications include seals for temporary area denial, protection of sensitive equipment, chain-of-custody audit trails, and inventory control practices. A next generation of adhesive tamper tapes is being developed that combines the best features of commercially available devices with additional state-of-the-art features in tamper indication, tamper-resistance, and counterfeit-resistance. The additional features are based on U.S. Department of Energy (DOE) research and development (R ampersand D) activities that were originally associated with preparations for the Strategic Arms Reduction Treaty (START). New features include rapid-set, chemical-cure adhesive systems that allow user-friendly application and layered levels of counterfeit-resistance based on unique open-quotes fingerprintclose quotes characteristics that can be accessed as desired

audio-ultrasonic waves by argon gas discharge

International Nuclear Information System (INIS)

Ragheb, M.S.

2010-01-01

in the present work, wave emission formed by audio-ultrasonic plasma is investigated. the evidence of the magnetic and electric fields presence is performed by experimental technique. comparison between experimental field measurements and several plasma wave methods reveals the plasma audio-ultrasonic radiations mode. this plasma is a symmetrically driven capacitive discharge, consisting of three interactive regions: the electrodes, the sheaths, and the positive column regions . the discharge voltage is up to 900 volts, the discharge current flowing through the plasma attains a value of 360 mA .the frequency of the discharge voltage covers the audio and the ultrasonic range up to 100 khz. the effective plasma working distance has increased to attain the total length of the tube of 40 cm. a non-disturbing method using an external coil is used to measure the electric discharge field in a plane perpendicular to that of the plasma axe tube. this method proves the existence of a current flowing in a direction perpendicular to the plasma axe tube. a system of minute coils sensors proved the existence of two fields in two perpendicular directions . comparison between different observed fields reveals the existence of propagating electromagnetic waves due to the alternating current flowing through the skin plasma tube. the field intensity distribution along the tube draws the discharge current behavior between the two plasma electrodes that can be used to predict the range of the plasma discharge current.

Sensitivity of perianal tape impressions to diagnose pinworm (Syphacia spp.) infections in rats (Rattus norvegicus) and mice (Mus musculus).

Science.gov (United States)

Hill, William Allen; Randolph, Mildred M; Mandrell, Timothy D

2009-07-01

We determined the sensitivity of perianal tape impressions to detect Syphacia spp. in rats and mice. We evaluated 300 rat and 200 mouse perianal impressions over 9 wk. Pinworm-positive perianal tape impressions from animals with worm burdens at necropsy were considered as true positives. Conversely, pinworm-negative perianal tape impressions from animals with worm burdens were considered false negatives. The sensitivity of perianal tape impressions for detecting Syphacia muris infections in rats was 100%, and for detecting Syphacia obvelata in mice was 85.5%. Intermittent shedding of Syphacia obvelata ova is the most probable explanation for the decreased sensitivity rate we observed in mice. We urge caution in use of perianal tape impressions alone for Syphacia spp. screening in sentinel mice and rats.

High-Order Sparse Linear Predictors for Audio Processing

DEFF Research Database (Denmark)

Giacobello, Daniele; van Waterschoot, Toon; Christensen, Mads Græsbøll

2010-01-01

Linear prediction has generally failed to make a breakthrough in audio processing, as it has done in speech processing. This is mostly due to its poor modeling performance, since an audio signal is usually an ensemble of different sources. Nevertheless, linear prediction comes with a whole set...... of interesting features that make the idea of using it in audio processing not far fetched, e.g., the strong ability of modeling the spectral peaks that play a dominant role in perception. In this paper, we provide some preliminary conjectures and experiments on the use of high-order sparse linear predictors...... in audio processing. These predictors, successfully implemented in modeling the short-term and long-term redundancies present in speech signals, will be used to model tonal audio signals, both monophonic and polyphonic. We will show how the sparse predictors are able to model efficiently the different...

Audio Mining with emphasis on Music Genre Classification

DEFF Research Database (Denmark)

Meng, Anders

2004-01-01

Audio is an important part of our daily life, basically it increases our impression of the world around us whether this is communication, music, danger detection etc. Currently the field of Audio Mining, which here includes areas of music genre, music recognition / retrieval, playlist generation...... the world the problem of detecting environments from the input audio is researched as to increase the life quality of hearing-impaired. Basically there is a lot of work within the field of audio mining. The presentation will mainly focus on music genre classification where we have a fixed amount of genres...... to choose from. Basically every audio mining system is more or less consisting of the same stages as for the music genre setting. My research so far has mainly focussed on finding relevant features for music genre classification living at different timescales using early and late information fusion. It has...

The value of filmed interviews: issues of visualization, visual transcrips and the reading of visual texts

NARCIS (Netherlands)

Witteveen, L.; Lie, R.

2013-01-01

The increased access to video technology advances the use of visual methodologies in research. Following these developments, researchers are confronted with new challenges. Video recordings of interviews, as compared to audio recordings, are gaining interest in qualitative field research in the

Subjective and Objective Assessment of Perceived Audio Quality of Current Digital Audio Broadcasting Systems and Web-Casting Applications

NARCIS (Netherlands)

Pocta, P.; Beerends, J.G.

2015-01-01

This paper investigates the impact of different audio codecs typically deployed in current digital audio broadcasting (DAB) systems and web-casting applications, which represent a main source of quality impairment in these systems and applications, on the quality perceived by the end user. Both

Kinesio Taping Fundamentals for the Equine Athlete.

Science.gov (United States)

Molle, Sybille

2016-04-01

The Kinesio taping method was developed in Japan for use in humans in 1979. The use of complementary therapies is becoming common in equine athletes and the discovery of Kinesio taping potential brought it into the animal world. Kinesio taping can be used to treat a wide range of clinical conditions, from tendon injuries to neurologic disorders and from muscle contractures to postural insufficiencies. Its use in veterinary medicine is promising, but relies heavily on evidence-based clinical reports. Further scientific research is needed to fully understand the real effectiveness of application. Copyright © 2016 Elsevier Inc. All rights reserved.

'Behind the doors of learning': The transmission of racist and sexist ...

African Journals Online (AJOL)

While the official History curriculum (NCS, 2002) advocates multi-perspectival epistemological approaches, this paper illustrates the subordination of epistemic goals to racist and sexist ideological goals through the transmission of racist and sexist discourses. A teacher's lessons were observed, audio-taped, transcribed ...

Augmenting Environmental Interaction in Audio Feedback Systems

Directory of Open Access Journals (Sweden)

Seunghun Kim

2016-04-01

Full Text Available Audio feedback is defined as a positive feedback of acoustic signals where an audio input and output form a loop, and may be utilized artistically. This article presents new context-based controls over audio feedback, leading to the generation of desired sonic behaviors by enriching the influence of existing acoustic information such as room response and ambient noise. This ecological approach to audio feedback emphasizes mutual sonic interaction between signal processing and the acoustic environment. Mappings from analyses of the received signal to signal-processing parameters are designed to emphasize this specificity as an aesthetic goal. Our feedback system presents four types of mappings: approximate analyses of room reverberation to tempo-scale characteristics, ambient noise to amplitude and two different approximations of resonances to timbre. These mappings are validated computationally and evaluated experimentally in different acoustic conditions.

Fusion of audio and visual cues for laughter detection

NARCIS (Netherlands)

Petridis, Stavros; Pantic, Maja

Past research on automatic laughter detection has focused mainly on audio-based detection. Here we present an audio- visual approach to distinguishing laughter from speech and we show that integrating the information from audio and video channels leads to improved performance over single-modal

Forensic utility of the carbon isotope ratio of PVC tape backings

Science.gov (United States)

Stern, L. A.; Thompson, A. H.; Mehltretter, A. H.; McLaskey, V.; Parish, A.; Aranda, R.

2008-12-01

Forensic interest in adhesive tapes with PVC-backings (polyvinyl chloride, electrical tapes) derives from their use in construction of improvised explosive devices, drug packaging and in a variety of other illicit activities. Due to the range of physical characteristics and chemical compositions of such tapes, traditional microscopic and chemical analysis of the tape backings and adhesives offer a high degree of discrimination between tapes from different manufacturers and products. To evaluate whether carbon isotope ratios may be able to increase discrimination of electrical tapes, particularly with regards to different tapes of the same product, we assessed the PVC-backings of 87 rolls of black electrical tape for their δ13C values. The adhesive on these tapes was physically removed with hexane, and plasticizers within the PVC tape backings were removed by three-20 minute extractions with chloroform. The δ13C values of the PVC tape backings ranged between -23.8 and -41.5 (‰ V-PDB). The carbon isotopic variation within a product (identical brand and product identification) is significant, based on five products with at least 3 rolls (ranges of 7.4‰ (n=3), 10.0‰ (n=6), 4.2‰ (n=16), 3.8‰ (n=6), and 11.5‰ (n=8), respectively). There was no measurable carbon isotope variation in regards to the following: a) along the length of a roll (4 samples from 1 roll); b) between the center and edge of a strip of tape (1 pair); c) between rolls assumed to be from the same lot of tape (2 pairs); d) between different rolls from the same batch of tape (same product purchased at the same time and place; 5 pairs); and e) between samples of a tape at room temperature, heated to 50° C and 80° C for 1 week. For each sample within the population of 87 tapes, carbon isotopes alone exclude 80 to 100% of the tapes as a potential match, with an average exclusion power of 92.5%, using a window of ± 0.4‰. Carbon isotope variations originate from variations in starting

Digital Augmented Reality Audio Headset

Directory of Open Access Journals (Sweden)

Jussi Rämö

2012-01-01

Full Text Available Augmented reality audio (ARA combines virtual sound sources with the real sonic environment of the user. An ARA system can be realized with a headset containing binaural microphones. Ideally, the ARA headset should be acoustically transparent, that is, it should not cause audible modification to the surrounding sound. A practical implementation of an ARA mixer requires a low-latency headphone reproduction system with additional equalization to compensate for the attenuation and the modified ear canal resonances caused by the headphones. This paper proposes digital IIR filters to realize the required equalization and evaluates a real-time prototype ARA system. Measurements show that the throughput latency of the digital prototype ARA system can be less than 1.4 ms, which is sufficiently small in practice. When the direct and processed sounds are combined in the ear, a comb filtering effect is brought about and appears as notches in the frequency response. The comb filter effect in speech and music signals was studied in a listening test and it was found to be inaudible when the attenuation is 20 dB. Insert ARA headphones have a sufficient attenuation at frequencies above about 1 kHz. The proposed digital ARA system enables several immersive audio applications, such as a virtual audio tourist guide and audio teleconferencing.

Museums for all: evaluation of an audio descriptive guide for visually impaired visitors at the science museum

Directory of Open Access Journals (Sweden)

Silvia Soler Gallego

2014-12-01

Full Text Available Translation and interpreting are valuable tools to improve accessibility at museums. Theese tools permit the museum communicate with visitors with different capabilities. The aim of this article is to show the results of a study carried out within the TACTO project, aimed at creating and evaluating an audio descriptive guide for visually impaired visitors at the Science Museum of Granada. The project focused on the linguistic aspects of the guide’s contents and its evaluation, which combined the participatory observation with a survey and interview. The results from this study allow us to conclude that the proposed design improves visually impaired visitors’ access to the museum. However, the expectations and specific needs of each visitor change considerably depending on individual factors such as their level of disability and museum visiting habits.

Perceptual Audio Hashing Functions

Directory of Open Access Journals (Sweden)

Emin Anarım

2005-07-01

Full Text Available Perceptual hash functions provide a tool for fast and reliable identification of content. We present new audio hash functions based on summarization of the time-frequency spectral characteristics of an audio document. The proposed hash functions are based on the periodicity series of the fundamental frequency and on singular-value description of the cepstral frequencies. They are found, on one hand, to perform very satisfactorily in identification and verification tests, and on the other hand, to be very resilient to a large variety of attacks. Moreover, we address the issue of security of hashes and propose a keying technique, and thereby a key-dependent hash function.

Numerical and Experimental Investigation of the Electromechanical Behavior of REBCO Tapes

Science.gov (United States)

Allen, N. C.; Chiesa, L.; Takayasu, M.

2015-12-01

To fully characterize the electromechanical behavior of a Twisted Stacked-Tape Cable (TSTC) it is important to understand the performance of the individual REBCO tapes under various loading conditions. Numerical modeling and experimentation have been used to investigate the electromechanical characteristics of two commercially available REBCO tapes (SuperPower and SuNAM). Tension and combined tension-torsion experiments on single tapes have been continued, from prior preliminary studies, to characterize their critical current behavior and mechanical strength. Additionally, structural finite element analysis was performed on single tapes under tension and combined tension-torsion to investigate the strain dependence of the critical current. The numerical results were compared to the experimental findings for validation. The SuNAM experimental data matched the numerical model very well while the SuperPower tape experienced degradation at lower stress and strain than predicted in the model. The Superpower tape also displayed greater variability in critical current between different samples as compared with the SuNAM tape.

Horatio Audio-Describes Shakespeare's "Hamlet": Blind and Low-Vision Theatre-Goers Evaluate an Unconventional Audio Description Strategy

Science.gov (United States)

Udo, J. P.; Acevedo, B.; Fels, D. I.

2010-01-01

Audio description (AD) has been introduced as one solution for providing people who are blind or have low vision with access to live theatre, film and television content. However, there is little research to inform the process, user preferences and presentation style. We present a study of a single live audio-described performance of Hart House…

Audio localization for mobile robots

OpenAIRE

de Guillebon, Thibaut; Grau Saldes, Antoni; Bolea Monte, Yolanda

2009-01-01

The department of the University for which I worked is developing a project based on the interaction with robots in the environment. My work was to define an audio system for the robot. This audio system that I have to realize consists on a mobile head which is able to follow the sound in its environment. This subject was treated as a research problem, with the liberty to find and develop different solutions and make them evolve in the chosen way.

Effects of ultrasound therapy with taping PNF training and PNF training with taping in treatment and rehabilitation of sports injuries of high ankle sprain

Directory of Open Access Journals (Sweden)

D L Charly Daniel

2017-01-01

Conclusions: It was concluded that combining ultrasound with taping and PNF training with taping were found to be more beneficial in the treatment and rehabilitation of high ankle sprain injury. The combined effect of UT, PNF training, and taping may be explored by future researchers.

Procedural Audio in Computer Games Using Motion Controllers: An Evaluation on the Effect and Perception

Directory of Open Access Journals (Sweden)

Niels Böttcher

2013-01-01

Full Text Available A study has been conducted into whether the use of procedural audio affects players in computer games using motion controllers. It was investigated whether or not (1 players perceive a difference between detailed and interactive procedural audio and prerecorded audio, (2 the use of procedural audio affects their motor-behavior, and (3 procedural audio affects their perception of control. Three experimental surveys were devised, two consisting of game sessions and the third consisting of watching videos of gameplay. A skiing game controlled by a Nintendo Wii balance board and a sword-fighting game controlled by a Wii remote were implemented with two versions of sound, one sample based and the other procedural based. The procedural models were designed using a perceptual approach and by alternative combinations of well-known synthesis techniques. The experimental results showed that, when being actively involved in playing or purely observing a video recording of a game, the majority of participants did not notice any difference in sound. Additionally, it was not possible to show that the use of procedural audio caused any consistent change in the motor behavior. In the skiing experiment, a portion of players perceived the control of the procedural version as being more sensitive.

EVALUASI KEPUASAN PENGGUNA TERHADAP APLIKASI AUDIO BOOKS

Directory of Open Access Journals (Sweden)

Raditya Maulana Anuraga

2017-02-01

Full Text Available Listeno is the first application audio books in Indonesia so that the users can get the book in audio form like listen to music, Listeno have problems in a feature request Listeno offline mode that have not been released, a security problem mp3 files that must be considered, and the target Listeno not yet reached 100,000 active users. This research has the objective to evaluate user satisfaction to Audio Books with research method approach, Nielsen. The analysis in this study using Importance Performance Analysis (IPA is combined with the index of User Satisfaction (IKP based on the indicators used are: Benefit (Usefulness, Utility (Utility, Usability (Usability, easy to understand (Learnability, Efficient (efficiency , Easy to remember (Memorability, Error (Error, and satisfaction (satisfaction. The results showed Applications User Satisfaction Audio books are quite satisfied with the results of the calculation IKP 69.58%..

Musical examination to bridge audio data and sheet music

Science.gov (United States)

Pan, Xunyu; Cross, Timothy J.; Xiao, Liangliang; Hei, Xiali

2015-03-01

The digitalization of audio is commonly implemented for the purpose of convenient storage and transmission of music and songs in today's digital age. Analyzing digital audio for an insightful look at a specific musical characteristic, however, can be quite challenging for various types of applications. Many existing musical analysis techniques can examine a particular piece of audio data. For example, the frequency of digital sound can be easily read and identified at a specific section in an audio file. Based on this information, we could determine the musical note being played at that instant, but what if you want to see a list of all the notes played in a song? While most existing methods help to provide information about a single piece of the audio data at a time, few of them can analyze the available audio file on a larger scale. The research conducted in this work considers how to further utilize the examination of audio data by storing more information from the original audio file. In practice, we develop a novel musical analysis system Musicians Aid to process musical representation and examination of audio data. Musicians Aid solves the previous problem by storing and analyzing the audio information as it reads it rather than tossing it aside. The system can provide professional musicians with an insightful look at the music they created and advance their understanding of their work. Amateur musicians could also benefit from using it solely for the purpose of obtaining feedback about a song they were attempting to play. By comparing our system's interpretation of traditional sheet music with their own playing, a musician could ensure what they played was correct. More specifically, the system could show them exactly where they went wrong and how to adjust their mistakes. In addition, the application could be extended over the Internet to allow users to play music with one another and then review the audio data they produced. This would be particularly

Estimation of inhalation flow profile using audio-based methods to assess inhaler medication adherence

Science.gov (United States)

Lacalle Muls, Helena; Costello, Richard W.; Reilly, Richard B.

2018-01-01

Asthma and chronic obstructive pulmonary disease (COPD) patients are required to inhale forcefully and deeply to receive medication when using a dry powder inhaler (DPI). There is a clinical need to objectively monitor the inhalation flow profile of DPIs in order to remotely monitor patient inhalation technique. Audio-based methods have been previously employed to accurately estimate flow parameters such as the peak inspiratory flow rate of inhalations, however, these methods required multiple calibration inhalation audio recordings. In this study, an audio-based method is presented that accurately estimates inhalation flow profile using only one calibration inhalation audio recording. Twenty healthy participants were asked to perform 15 inhalations through a placebo Ellipta™ DPI at a range of inspiratory flow rates. Inhalation flow signals were recorded using a pneumotachograph spirometer while inhalation audio signals were recorded simultaneously using the Inhaler Compliance Assessment device attached to the inhaler. The acoustic (amplitude) envelope was estimated from each inhalation audio signal. Using only one recording, linear and power law regression models were employed to determine which model best described the relationship between the inhalation acoustic envelope and flow signal. Each model was then employed to estimate the flow signals of the remaining 14 inhalation audio recordings. This process repeated until each of the 15 recordings were employed to calibrate single models while testing on the remaining 14 recordings. It was observed that power law models generated the highest average flow estimation accuracy across all participants (90.89±0.9% for power law models and 76.63±2.38% for linear models). The method also generated sufficient accuracy in estimating inhalation parameters such as peak inspiratory flow rate and inspiratory capacity within the presence of noise. Estimating inhaler inhalation flow profiles using audio based methods may be

Data analysis of event tape and connection

International Nuclear Information System (INIS)

Gong Huili

1995-01-01

The data analysis on the VAX-11/780 computer is briefly described, the data is from the recorded event tape of JUHU data acquisition system on the PDP-11/44 computer. The connection of the recorded event tapes of the XSYS data acquisition system on VAX computer is also introduced

Transobturator tapes are preferable over transvaginal tapes for the management of female stress urinary incontinence: Against

Directory of Open Access Journals (Sweden)

Arun Chawla

2009-01-01

Full Text Available Midurethral placement of tension-free vaginal tapes with a transvaginal route for stress urinary incontinence achieves higher and better long-term success rates than the transobturator route. Bladder perforations are reported more in transvaginal tape (TVT but incidences of vaginal erosions, extrusion, and groin pain are exceedingly more in TOT groups. There is no clear evidence that transobturator tape (TOT is associated with less post-operative voiding problems than TVT. Major complications such as bowel injuries and significant vascular injuries with TVT are rare. TVT has been found to be superior to TOT and preferable in technically demanding conditions such as prior anti-incontinence operation failures, obese women, and very elevated and scarred lateral cul-de sac. TVT is always preferred in severe grades of stress urinary incontinence and with patients of intrinsic sphincter deficiency (ISD with little or no urethral mobility.

Removable Watermarking Sebagai Pengendalian Terhadap Cyber Crime Pada Audio Digital

Directory of Open Access Journals (Sweden)

Reyhani Lian Putri

2017-08-01

Full Text Available Perkembangan teknologi informasi yang pesat menuntut penggunanya untuk lebih berhati-hati seiring semakin meningkatnya cyber crime.Banyak pihak telah mengembangkan berbagai teknik perlindungan data digital, salah satunya adalah watermarking. Teknologi watermarking berfungsi untuk memberikan identitas, melindungi, atau menandai data digital, baik audio, citra, ataupun video, yang mereka miliki. Akan tetapi, teknik tersebut masih dapat diretas oleh oknum-oknum yang tidak bertanggung jawab.Pada penelitian ini, proses watermarking diterapkan pada audio digital dengan menyisipkan watermark yang terdengar jelas oleh indera pendengaran manusia (perceptible pada audio host.Hal ini bertujuan agar data audio dapat terlindungi dan apabila ada pihak lain yang ingin mendapatkan data audio tersebut harus memiliki “kunci” untuk menghilangkan watermark. Proses removable watermarking ini dilakukan pada data watermark yang sudah diketahui metode penyisipannya, agar watermark dapat dihilangkan sehingga kualitas audio menjadi lebih baik. Dengan menggunakan metode ini diperoleh kinerja audio watermarking pada nilai distorsi tertinggi dengan rata-rata nilai SNR sebesar7,834 dB dan rata-rata nilai ODG sebesar -3,77.Kualitas audio meningkat setelah watermark dihilangkan, di mana rata-rata SNR menjadi sebesar 24,986 dB dan rata-rata ODG menjadi sebesar -1,064 serta nilai MOS sebesar 4,40.

A listening test system for automotive audio

DEFF Research Database (Denmark)

Christensen, Flemming; Geoff, Martin; Minnaar, Pauli

2005-01-01

This paper describes a system for simulating automotive audio through headphones for the purposes of conducting listening experiments in the laboratory. The system is based on binaural technology and consists of a component for reproducing the sound of the audio system itself and a component...

Voice activity detection using audio-visual information

DEFF Research Database (Denmark)

Petsatodis, Theodore; Pnevmatikakis, Aristodemos; Boukis, Christos

2009-01-01

An audio-visual voice activity detector that uses sensors positioned distantly from the speaker is presented. Its constituting unimodal detectors are based on the modeling of the temporal variation of audio and visual features using Hidden Markov Models; their outcomes are fused using a post...

Impact of Audio-Coaching on the Position of Lung Tumors

International Nuclear Information System (INIS)

Haasbeek, Cornelis J.A.; Spoelstra, Femke; Lagerwaard, Frank J.; Soernsen de Koste, John R. van; Cuijpers, Johan P.; Slotman, Ben J.; Senan, Suresh

2008-01-01

Purpose: Respiration-induced organ motion is a major source of positional, or geometric, uncertainty in thoracic radiotherapy. Interventions to mitigate the impact of motion include audio-coached respiration-gated radiotherapy (RGRT). To assess the impact of coaching on average tumor position during gating, we analyzed four-dimensional computed tomography (4DCT) scans performed both with and without audio-coaching. Methods and Materials: Our RGRT protocol requires that an audio-coached 4DCT scan is performed when the initial free-breathing 4DCT indicates a potential benefit with gating. We retrospectively analyzed 22 such paired scans in patients with well-circumscribed tumors. Changes in lung volume and position of internal target volumes (ITV) generated in three consecutive respiratory phases at both end-inspiration and end-expiration were analyzed. Results: Audio-coaching increased end-inspiration lung volumes by a mean of 10.2% (range, -13% to +43%) when compared with free breathing (p = 0.001). The mean three-dimensional displacement of the center of ITV was 3.6 mm (SD, 2.5; range, 0.3-9.6mm), mainly caused by displacement in the craniocaudal direction. Displacement of ITV caused by coaching was more than 5 mm in 5 patients, all of whom were in the subgroup of 9 patients showing total tumor motion of 10 mm or more during both coached and uncoached breathing. Comparable ITV displacements were observed at end-expiration phases of the 4DCT. Conclusions: Differences in ITV position exceeding 5 mm between coached and uncoached 4DCT scans were detected in up to 56% of mobile tumors. Both end-inspiration and end-expiration RGRT were susceptible to displacements. This indicates that the method of audio-coaching should remain unchanged throughout the course of treatment

Optimization of superconductivity properties in MgB2 Wires and tapes to generate high magnetic fields

International Nuclear Information System (INIS)

Serrano, German

2005-01-01

We present, in this work, a study of the effects of doping, heat treatments and mechanisms of deformation, over the microstructure and superconducting properties of powder in tube (PIT) M g B 2 wires and tapes.We observed that nano-SiC doping improves the critical current density (J c ) and the upper critical field (H c 2).The combined use of doping and Hot Isostatic Pressing (HIPing), produces samples with high density and improves J c s.We studied the influence of number and temperature of intermediate heat treatments (TTI), during the fabrication of wires and tapes.We observed that TTI made at low temperature ( o C), results in wires and tapes with better microstructure than those made at high temperature.Moreover, the increment of the heat treatments numbers at high temperature, decreases the quality of microstructure and J c .In the study of sheaths materials, we observed that the J c values measured by magnetization in Ti sheath samples are two order of magnitude larger than the values measured by transport, which indicates macroscopic fracture problems.On other hand, we fabricated tapes with excellent J c values (10 4 A/cm 2 at 4K and 7T), which are similar to those of samples made with HIPing.This tape presents some degree of grains alignment, as a consequence of rolling.We observed J c anisotropy in both transport and magnetization measurements in a range between 4 and 26K, and the same effect in H c 2.The anisotropy factor in Jc increase with applied field, while the anisotropy in Hc2 is constant with temperature (H c 2 parallel H c 2 perpendicular ∼1.2).Finally, we observed that carbon nanotubes doping improves H c 2 and this effects is most important at temperatures below 5K.This increase in H c 2 was predicted by Gurevich [45], as an effect of modification in scattering coefficient between electronics bands of M g B 2 by doping [es

Audio-Visual Speech Recognition Using MPEG-4 Compliant Visual Features

Directory of Open Access Journals (Sweden)

Petar S. Aleksic

2002-11-01

Full Text Available We describe an audio-visual automatic continuous speech recognition system, which significantly improves speech recognition performance over a wide range of acoustic noise levels, as well as under clean audio conditions. The system utilizes facial animation parameters (FAPs supported by the MPEG-4 standard for the visual representation of speech. We also describe a robust and automatic algorithm we have developed to extract FAPs from visual data, which does not require hand labeling or extensive training procedures. The principal component analysis (PCA was performed on the FAPs in order to decrease the dimensionality of the visual feature vectors, and the derived projection weights were used as visual features in the audio-visual automatic speech recognition (ASR experiments. Both single-stream and multistream hidden Markov models (HMMs were used to model the ASR system, integrate audio and visual information, and perform a relatively large vocabulary (approximately 1000 words speech recognition experiments. The experiments performed use clean audio data and audio data corrupted by stationary white Gaussian noise at various SNRs. The proposed system reduces the word error rate (WER by 20% to 23% relatively to audio-only speech recognition WERs, at various SNRs (0–30 dB with additive white Gaussian noise, and by 19% relatively to audio-only speech recognition WER under clean audio conditions.

Parametric Packet-Layer Model for Evaluation Audio Quality in Multimedia Streaming Services

Science.gov (United States)

Egi, Noritsugu; Hayashi, Takanori; Takahashi, Akira

We propose a parametric packet-layer model for monitoring audio quality in multimedia streaming services such as Internet protocol television (IPTV). This model estimates audio quality of experience (QoE) on the basis of quality degradation due to coding and packet loss of an audio sequence. The input parameters of this model are audio bit rate, sampling rate, frame length, packet-loss frequency, and average burst length. Audio bit rate, packet-loss frequency, and average burst length are calculated from header information in received IP packets. For sampling rate, frame length, and audio codec type, the values or the names used in monitored services are input into this model directly. We performed a subjective listening test to examine the relationships between these input parameters and perceived audio quality. The codec used in this test was the Advanced Audio Codec-Low Complexity (AAC-LC), which is one of the international standards for audio coding. On the basis of the test results, we developed an audio quality evaluation model. The verification results indicate that audio quality estimated by the proposed model has a high correlation with perceived audio quality.

Audio power amplifier design handbook

CERN Document Server

Self, Douglas

2013-01-01

This book is essential for audio power amplifier designers and engineers for one simple reason...it enables you as a professional to develop reliable, high-performance circuits. The Author Douglas Self covers the major issues of distortion and linearity, power supplies, overload, DC-protection and reactive loading. He also tackles unusual forms of compensation and distortion produced by capacitors and fuses. This completely updated fifth edition includes four NEW chapters including one on The XD Principle, invented by the author, and used by Cambridge Audio. Cro

Audio stream classification for multimedia database search

Science.gov (United States)

Artese, M.; Bianco, S.; Gagliardi, I.; Gasparini, F.

2013-03-01

Search and retrieval of huge archives of Multimedia data is a challenging task. A classification step is often used to reduce the number of entries on which to perform the subsequent search. In particular, when new entries of the database are continuously added, a fast classification based on simple threshold evaluation is desirable. In this work we present a CART-based (Classification And Regression Tree [1]) classification framework for audio streams belonging to multimedia databases. The database considered is the Archive of Ethnography and Social History (AESS) [2], which is mainly composed of popular songs and other audio records describing the popular traditions handed down generation by generation, such as traditional fairs, and customs. The peculiarities of this database are that it is continuously updated; the audio recordings are acquired in unconstrained environment; and for the non-expert human user is difficult to create the ground truth labels. In our experiments, half of all the available audio files have been randomly extracted and used as training set. The remaining ones have been used as test set. The classifier has been trained to distinguish among three different classes: speech, music, and song. All the audio files in the dataset have been previously manually labeled into the three classes above defined by domain experts.

Temperature dependence of filament-coupling in Bi-2223 tapes: magneto-optical study

International Nuclear Information System (INIS)

Bobyl, A.V.; Shantsev, D.V.; Galperin, Y.M.; Johansen, T.H.; Baziljevich, M.; Gaevski, M.E.

2000-01-01

Coupling through random superconducting bridges between filaments in a multifilamentary Ag-sheathed Bi 2 Sr 2 Ca 2 Cu 3 O 10+δ tape has been investigated by magneto-optical imaging at temperatures from 20 K up to T c . Magnetic flux distributions have been measured on the surface of an intact tape in the remanent state on applying a strong perpendicular magnetic field. The flux distributions observed at low temperatures reflect the arrangement of individual filaments. At high temperatures, the distribution becomes more similar to that for a uniform monocore tape, indicating that superconducting connections appear between the filaments. To discuss the relative contributions of the intra- and inter-filament currents, a simple model based on the Bean critical state was proposed and applied to analyse the temperature dependent behaviour. The inter-filament coupling, increasing with temperature, reaches at 77 K a point where the currents flowing in large inter-filament loops are roughly equal to the intra-filament currents. (author)

New interview and observation measures of the broader autism phenotype : group differentiation

NARCIS (Netherlands)

de Jonge, Maretha; Parr, Jeremy; Rutter, Michael; Wallace, Simon; Kemner, Chantal|info:eu-repo/dai/nl/96717041; Bailey, Anthony; van Engeland, Herman; Pickles, Andrew

To identify the broader autism phenotype (BAP), the Family History Interview subject and informant versions and an observational tool (Impression of Interviewee), were developed. This study investigated whether the instruments differentiated between parents of children with autism, and parents of

New Interview and Observation Measures of the Broader Autism Phenotype : Group Differentiation

NARCIS (Netherlands)

de Jonge, Maretha; Parr, Jeremy; Rutter, Michael; Wallace, Simon; Kemner, Chantal; Bailey, Anthony; van Engeland, Herman; Pickles, Andrew

2015-01-01

To identify the broader autism phenotype (BAP), the Family History Interview subject and informant versions and an observational tool (Impression of Interviewee), were developed. This study investigated whether the instruments differentiated between parents of children with autism, and parents of

Carbon Nanotube-Based Synthetic Gecko Tapes

Science.gov (United States)

Dhinojwala, Ali

2008-03-01

Wall-climbing geckos have unique ability to attach to different surfaces without the use of any viscoelastic glues. On coming in contact with any surface, the micron-size gecko foot-hairs deform, enabling molecular contact over large areas, thus translating weak van der Waals (vdW) interactions into enormous shear forces. We will present our recent results on the development of synthetic gecko tape using aligned carbon nanotubes to mimic the keratin hairs found on gecko feet. The patterned carbon nanotube-based gecko tape can support a shear stress (36 N/cm^2) nearly four times higher than the gecko foot and sticks to a variety of surfaces, including Teflon. Both the micron-size setae (replicated by nanotube bundles) and nanometer-size spatulas (individual nanotubes) are necessary to achieve macroscopic shear adhesion and to translate the weak vdW interactions into high shear forces. The carbon nanotube based tape offers an excellent synthetic option as a dry conductive reversible adhesive in microelectronics, robotics and space applications. The mechanism behind these large shear forces and self-cleaning properties of these carbon nanotube based synthetic gecko tapes will be discussed. This work was performed in collaboration with graduate students Liehui Ge, and Sunny Sethi, and collaborators from RPI; Lijie Ci and Professor Pulickel Ajayan.

Analytical investigation in bending characteristic of twisted stacked-tape cable conductor

International Nuclear Information System (INIS)

Takayasu, Makoto; Chiesa, Luisa

2015-01-01

An analytical model to evaluate bending strains of a twisted stack-tape cable (TSTC) conductor has been developed. Through a comparison with experimental results obtained for a soldered 32-tape YBCO TSTC conductor, it has been found that a Perfect-Slip Model (PSM) taking into account the slipping between tapes in a stacked-tape cable during bending gives much better estimation of the bending performance compared to a No-Slip Model (NSM). In the PSM case the tapes can slip so that the internal longitudinal axial strain can be released. The longitudinal strains of compression and tension regions along the tape are balanced in one twist-pitch and cancel out evenly in a long cable. Therefore, in a cable the strains due to bending can be minimized. This is an important advantage of a TSTC conductor. The effect of the cable diameter size on the bending strain is also expected to be minor, and all tapes composing a TSTC conductor have the same strain response under bending, therefore the cable critical current can be characterized from a single tape behaviour. (paper)

Analytical investigation in bending characteristic of twisted stacked-tape cable conductor

Science.gov (United States)

Takayasu, Makoto; Chiesa, Luisa

2015-12-01

An analytical model to evaluate bending strains of a twisted stack-tape cable (TSTC) conductor has been developed. Through a comparison with experimental results obtained for a soldered 32-tape YBCO TSTC conductor, it has been found that a Perfect-Slip Model (PSM) taking into account the slipping between tapes in a stacked-tape cable during bending gives much better estimation of the bending performance compared to a No-Slip Model (NSM). In the PSM case the tapes can slip so that the internal longitudinal axial strain can be released. The longitudinal strains of compression and tension regions along the tape are balanced in one twist-pitch and cancel out evenly in a long cable. Therefore, in a cable the strains due to bending can be minimized. This is an important advantage of a TSTC conductor. The effect of the cable diameter size on the bending strain is also expected to be minor, and all tapes composing a TSTC conductor have the same strain response under bending, therefore the cable critical current can be characterized from a single tape behaviour.

Radiographic Outcomes of Postoperative Taping Following Hallux Valgus Correction.

Science.gov (United States)

Ponzio, Danielle Y; Pedowitz, David I; Verma, Kushagra; Maltenfort, Mitchell G; Winters, Brian S; Raikin, Steven M

2015-07-01

Traditionally, hallux valgus operative correction has been accompanied by serial spica taping of the great toe during the postoperative period. We retrospectively reviewed 187 adult patients who underwent proximal first metatarsal osteotomy with a modified McBride procedure in 2008-2009 (n = 83) and 2011-2012 (n = 104). Postoperatively, to maintain the corrected position of the hallux, patients from 2008 through 2009 underwent weekly spica taping, while patients from 2011 through 2012 utilized a toe separator. The hallux valgus angle (HVA) and intermetatarsal angle (IMA) were measured using anteroposterior weight-bearing preoperative, 2-week postoperative non-weight-bearing, and 3-month weight-bearing final follow-up radiographs. A mixed-effects linear regression model identified differences between the treatment groups over time, and a t test compared actual radiographic differences at final follow-up. The mixed-effects model revealed no significant difference in the HVA over time when comparing patients taped to those not taped at the preoperative (33 ± 6 vs 33 ± 6), 2-week postoperative (10 ± 7 vs 9 ± 6), and 3-month follow-up (14 ± 6 vs 11 ± 7) visits (P = .08). At final follow-up, the HVA was lower for the group that was not taped, but the difference (2.5 degrees) was below the minimal clinically important difference (MCID) (P = .015, 95% CI 0.5-4.5). For IMA, there was improved maintenance of correction over time in the patients that were not taped compared to those taped at the preoperative (15 ± 3 vs 15 ± 3), 2-week postoperative (2 ± 2 vs 3 ± 3), and 3-month follow-up (5 ± 4 vs 7 ± 4) visits (P = .002). At final follow-up, the IMA was lower for the group that was not taped, but the difference (1.7 degrees) was below the MCID (P = .004, 95% CI 0.7-2.9). We report no radiographic benefit of postoperative taping after hallux valgus correction. The present study challenges the previous dogma of postoperative spica taping as the protocol is cost and

Device measures static friction of magnetic tape

Science.gov (United States)

Cole, P. T.

1967-01-01

Device measures the coefficient of static friction of magnetic tape over a range of temperatures and relative humidities. It uses a strain gage to measure the force of friction between a reference surface and the tape drawn at a constant velocity of approximately 0.0001 inch per second relative to the reference surface.

Bending strain study of Bi-2223/Ag tapes using Hall sensor magnetometry

International Nuclear Information System (INIS)

Lahtinen, M.; Paasi, J.; Sarkaniemi, J.; Han, Z.; Freltoft, T.

1996-01-01

The influence of room temperature bending on critical current (I c ) of Bi-2223/Ag tapes is studied by Hall sensor magnetometry, four-point method and scanning electron microscopy. Hall sensor magnetometry allows one to assess tape homogeneity and the amount of mechanical damage caused by bending. The microstructure of the Bi-2223 ceramic is found to strongly affect the tape behavior under bending strain. In a tape with moderate I c = 6.1 A at 77 K and a porous ceramic core, crack propagation took place normal to the Ag-ceramic interface, whereas in tapes with dense core, I c above 10 A at 77 K, cracks propagated in the tape plane. In monofilamentary tapes core homogeneity correlated with good bending strain performance. In multifilamentary tapes crack propagation between filaments was prohibited by the Ag matrix, thus leading to enhanced strain tolerance. In the high I c tapes studied, bending to 25 mm radius resulted in 1%--2% I c degradation

MP3 audio-editing software for the department of radiology

International Nuclear Information System (INIS)

Hong Qingfen; Sun Canhui; Li Ziping; Meng Quanfei; Jiang Li

2006-01-01

Objective: To evaluate the MP3 audio-editing software in the daily work in the department of radiology. Methods: The audio content of daily consultation seminar, held in the department of radiology every morning, was recorded and converted into MP3 audio format by a computer integrated recording device. The audio data were edited, archived, and eventually saved in the computer memory storage media, which was experimentally replayed and applied in the research or teaching. Results: MP3 audio-editing was a simple process and convenient for saving and searching the data. The record could be easily replayed. Conclusion: MP3 audio-editing perfectly records and saves the contents of consultation seminar, and has replaced the conventional hand writing notes. It is a valuable tool in both research and teaching in the department. (authors)

The Rating of Direct and Semi-Direct Oral Proficiency Interviews: Comparing Performance at Lower Proficiency Levels.

Science.gov (United States)

Kenyon, Dorry M.; Tschirner, Erwin

2000-01-01

Reports on a study comparing student performances and test reliabilities for the German Speaking Test, a semi-direct tape-mediated oral proficiency test (GST) developed by the Center for Applied Linguistics, and the American Council on the Teaching of Foreign Languages Oral Proficiency Interviews. (Author/VWL)

Automated processing of massive audio/video content using FFmpeg

Directory of Open Access Journals (Sweden)

Kia Siang Hock

2014-01-01

Full Text Available Audio and video content forms an integral, important and expanding part of the digital collections in libraries and archives world-wide. While these memory institutions are familiar and well-versed in the management of more conventional materials such as books, periodicals, ephemera and images, the handling of audio (e.g., oral history recordings and video content (e.g., audio-visual recordings, broadcast content requires additional toolkits. In particular, a robust and comprehensive tool that provides a programmable interface is indispensable when dealing with tens of thousands of hours of audio and video content. FFmpeg is comprehensive and well-established open source software that is capable of the full-range of audio/video processing tasks (such as encode, decode, transcode, mux, demux, stream and filter. It is also capable of handling a wide-range of audio and video formats, a unique challenge in memory institutions. It comes with a command line interface, as well as a set of developer libraries that can be incorporated into applications.

Study of the electric Held in HTS tape caused by perpendicular AC magnetic field

International Nuclear Information System (INIS)

Roiberg, V; Kopansky, F.

2004-01-01

Full Text: In a previous work we studied the influence of AC magnetic fields on voltage-currents (V-I) characteristics of high temperature superconducting (HTS) multi filament BSCC0-2223 tapes. It was found that AC magnetic fields perpendicular to the ab plane (the wide surface of the tape) cause a linear decrease of the critical current (IC) with amplitude of the AC magnetic field. The degradation of IC in .AC field was explained by the geometrical model according to which the transport current floe: is confined to the central zone of the tape where .AC field does not penetrate. For deeper understanding of the observed phenomena we carried out a study of the time dependence of the electric field during the cycle of AC field. At the same time we expanded the frequency range to low frequencies down to 1 Hz. The main results of the work are as following. 1. The time modulation of the electric field E in the HTS tape carrying transport DC current has the double frequency relating to AC magnetic field. 2. In field amplitudes less than 70 G the electric field modulation decreases with increasing frequency in opposite to its well-pronounced increase in higher AC field amplitudes. Alcove 70 G, the electric field increases with increasing the frequency of the external magnetic field. The wave forms of the electric field are different in both amplitudes ranges. 3. E-I curves of the tape in low amplitudes are frequency independent and coincide with E-l curves in AC field with intensity equal to the AC field amplitude. 4. In high AC field amplitudes, a strong dependence of the E-I curves on frequency is observed in the frequency range of 1-40 Hz and no dependence is observed in higher frequencies. Our results suggest that a combination of the geometrical model with flux creep concepts is necessary for a better understanding of the electric field behavior in our measurement conditions

Use of Effective Audio in E-learning Courseware

OpenAIRE

Ray, Kisor

2015-01-01

E-Learning uses electronic media, information & communication technologies to provide education to the masses. E-learning deliver hypertext, text, audio, images, animation and videos using desktop standalone computer, local area network based intranet and internet based contents. While producing an e-learning content or course-ware, a major decision making factor is whether to use audio for the benefit of the end users. Generally, three types of audio can be used in e-learning: narration, mus...

Simulation and analysis of tape spring for deployed space structures

Science.gov (United States)

Chang, Wei; Cao, DongJing; Lian, MinLong

2018-03-01

The tape spring belongs to the configuration of ringent cylinder shell, and the mechanical properties of the structure are significantly affected by the change of geometrical parameters. There are few studies on the influence of geometrical parameters on the mechanical properties of the tape spring. The bending process of the single tape spring was simulated based on simulation software. The variations of critical moment, unfolding moment, and maximum strain energy in the bending process were investigated, and the effects of different radius angles of section and thickness and length on driving capability of the simple tape spring was studied by using these parameters. Results show that the driving capability and resisting disturbance capacity grow with the increase of radius angle of section in the bending process of the single tape spring. On the other hand, these capabilities decrease with increasing length of the single tape spring. In the end, the driving capability and resisting disturbance capacity grow with the increase of thickness in the bending process of the single tape spring. The research has a certain reference value for improving the kinematic accuracy and reliability of deployable structures.

The health preoccupation diagnostic interview: inter-rater reliability of a structured interview for diagnostic assessment of DSM-5 somatic symptom disorder and illness anxiety disorder.

Science.gov (United States)

Axelsson, Erland; Andersson, Erik; Ljótsson, Brjánn; Wallhed Finn, Daniel; Hedman, Erik

2016-06-01

Somatic symptom disorder (SSD) and illness anxiety disorder (IAD) are two new diagnoses introduced in the DSM-5. There is a need for reliable instruments to facilitate the assessment of these disorders. We therefore developed a structured diagnostic interview, the Health Preoccupation Diagnostic Interview (HPDI), which we hypothesized would reliably differentiate between SSD, IAD, and no diagnosis. Persons with clinically significant health anxiety (n = 52) and healthy controls (n = 52) were interviewed using the HPDI. Diagnoses were then compared with those made by an independent assessor, who listened to audio recordings of the interviews. Ratings generally indicated moderate to almost perfect inter-rater agreement, as illustrated by an overall Cohen's κ of .85. Disagreements primarily concerned (a) the severity of somatic symptoms, (b) the differential diagnosis of panic disorder, and (c) SSD specifiers. We conclude that the HPDI can be used to reliably diagnose DSM-5 SSD and IAD.

THE MID - TERM EFFECT OF KINESIO TAPING ON PEAK POWER OF QUADRICEPS AND HAMSTRING MUSCLES AFTER ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION

Directory of Open Access Journals (Sweden)

Amel Khabazan Mahdi

2017-01-01

Full Text Available Purpose: The aim of this study was to assess mid- term effect of Kinesio tape on peak power of quadriceps and hamstrings muscles after ACL reconstruction 24 hours after taping. Material: Thirty six men who had undergone ACL reconstruction and completed physiotherapy periods (6 months were assigned to no taping, placebo and taping groups. Peak power was tested before and 24 hours after taping by Isokinetic dynamometry. Data was analyzed by SPSS software 19. ANOVA and post hoc test (LSD were used for interpretive analysis. Results: The results showed that the effect of Kinesio tape on peak power of quadriceps muscles at velocities of 180°/s and 300°/s was significant. In the hamstring muscles, significant effects were obtained at velocities of 60°/s, 180°/s & 300°/s. Conclusion: Positive impacts of Kinesio tape on muscular peak power among athletes who had ACL reconstruction were observed. Regardless of psychological effect and reducing re - injury fear, Kinesio - tape causes to stabilize and increase effective range of motion of the knee, so it is recommended that in the explosive training, athletes who have ACL reconstruction should use tape to reduce the probability of re-injury and increase muscle power.

Factors associated with Taiwanese lesbians' breast health-care behavior and intentions: Qualitative interview findings.

Science.gov (United States)

Wang, Ya-Ching; Griffiths, Jane; Grande, Gunn

2017-09-01

This article presents the qualitative findings of a mixed-methods study that explored factors influencing lesbians' breast health-care behavior and intentions. A total of 37 semi-structured face-to-face interviews were conducted among women who self-identified as lesbians or women who partnered with the same gender who were aged 20 years or above in four areas of Taiwan (North, Central, South, and East Taiwan) between August 2012 and October 2012. Interviews were audio recorded with participants' consent. The interviews were analyzed using constant comparative analysis with Nvivo audio-coding support. Four themes were identified to be strongly associated with the lesbians' breast health-care behavior and their intentions, namely, gender identity, gender role expression, partners' support, and concerns about health-care providers' reactions. Important barriers to the women's breast health-care behavior and intentions were masculine identity ("T-identity" in Taiwan), masculine appearance, concerns about health-care providers' lack of knowledge of multiple gender diversity, and their attitudes toward lesbians. Conversely, their partners' support was a factor facilitating the women's breast health-care behavior and intentions, particularly for the T-identity lesbians. These findings suggest the significance of and need for culturally competent care and are important for improving Taiwanese lesbians' breast health.

An Atmospheric Tape Recorder: The Imprint of Tropical Tropopause Temperatures on Stratospheric Water Vapor

Science.gov (United States)

Mote, Philip W.; Rosenlof, Karen H.; McIntyre, Michael E.; Carr, Ewan S.; Gille, John C.; Holton, James R.; Kinnersley, Jonathan S.; Pumphrey, Hugh C.; Russell, James M., III; Waters, Joe W.

1996-01-01

We describe observations of tropical stratospheric water vapor q that show clear evidence of large-scale upward advection of the signal from annual fluctuations in the effective 'entry mixing ratio' q(sub E) of air entering the tropical stratosphere. In other words, air is 'marked,' on emergence above the highest cloud tops, like a signal recorded on an upward moving magnetic tape. We define q(sub E) as the mean water vapor mixing ratio, at the tropical tropopause, of air that will subsequently rise and enter the stratospheric 'overworld' at about 400 K. The observations show a systematic phase lag, increasing with altitude, between the annual cycle in q(sub E) and the annual cycle in q at higher altitudes. The observed phase lag agrees with the phase lag calculated assuming advection by the transformed Eulerian-mean vertical velocity of a q(sub E) crudely estimated from 100-hPa temperatures, which we use as a convenient proxy for tropopause temperatures. The phase agreement confirms the overall robustness of the calculation and strongly supports the tape recorder hypothesis. Establishing a quantitative link between q(sub E) and observed tropopause temperatures, however, proves difficult because the process of marking the tape depends subtly on both small- and large-scale processes. The tape speed, or large-scale upward advection speed, has a substantial annual variation and a smaller variation due to the quasi-biennial oscillation, which delays or accelerates the arrival of the signal by a month or two in the middle stratosphere. As the tape moves upward, the signal is attenuated with an e-folding time of about 7 to 9 months between 100 and 50 hPa and about 15 to 18 months between 50 and 20 hPa, constraining possible orders of magnitude both of vertical diffusion K(sub z) and of rates of mixing in from the extratropics. For instance, if there were no mixing in, then K(sub z) would be in the range 0.03-0.09 m(exp 2)/s; this is an upper bound on K(sub z).

Short-Term Effects of Kinesio Taping on Muscle Recruitment Order During a Vertical Jump: A Pilot Study.

Science.gov (United States)

Mendez-Rebolledo, Guillermo; Ramirez-Campillo, Rodrigo; Guzman-Muñoz, Eduardo; Gatica-Rojas, Valeska; Dabanch-Santis, Alexis; Diaz-Valenzuela, Francisco

2018-06-22

Kinesio taping is commonly used in sports and rehabilitation settings with the aim of prevention and treatment of musculoskeletal injuries. However, limited evidence exists regarding the effects of 24 and 72 hours of kinesio taping on trunk and lower limb neuromuscular and kinetic performance during a vertical jump. The purpose of this study was to analyze the short-term effects of kinesio taping on height and ground reaction force during a vertical jump, in addition to trunk and lower limb muscle latency and recruitment order. Single-group pretest-posttest. University laboratory. Twelve male athletes from different sports (track and field, basketball, and soccer). They completed a single squat and countermovement jump at basal time (no kinesio taping), 24, and 72 hours of kinesio taping application on the gluteus maximus, biceps femoris, rectus femoris, gastrocnemius medialis, and longissimus. Muscle onset latencies were assessed by electromyography during a squat and countermovement jump, in addition to measurements of the jump height and normalized ground reaction force. The kinesio taping had no effect after 24 hours on either the countermovement or squat jump. However, at 72 hours, the kinesio taping increased the jump height (P = .02; d = 0.36) and normalized ground reaction force (P = .001; d = 0.45) during the countermovement jump. In addition, 72-hour kinesio taping reduced longissimus onset latency (P = .03; d = 1.34) and improved muscle recruitment order during a countermovement jump. These findings suggest that kinesio taping may improve neuromuscular and kinetic performance during a countermovement jump only after 72 hours of application on healthy and uninjured male athletes. However, no changes were observed on a squat jump. Future studies should incorporate a control group to verify kinesio taping's effects and its influence on injured athletes.

Buffer layers grown by replicating the texture of an original template tape

International Nuclear Information System (INIS)

Lim, Sunme; Yoo, Jaeun; Park, Chan; Youm, Dojun

2007-01-01

We propose a fabrication method of the buffer layers, whose biaxial textures are replicated from an original template tape. The purpose of this method is economical texturing process for coated conductors. At first we prepared a biaxially textured metal tape (TM-tape). Then a sacrifice layer (SA), a buffer layer (BU) and a thick metallic layer (SM) were sequentially deposited on the TM-tape. SA-layer and BU-layer were deposited epitaxially to copy the texture of the TM-tape. SA-layer was dissoluble in water. SM-layer with the textured BU-layer was separated and could be used for a supporting tape for the further growth of a superconducting layer. In this way, it is possible to reuse the original textured TM-tape many times. In this paper, we report the results of our experiments, in which we used a biaxially Ni tape, BaO film, STO film, and a thick Ag film for TM-tape, SA-layer, BU-layer, and SM-layer, respectively. The Ag/STO layers were successfully separated form the Ni tape by dissolving the BaO layer in water. The texture quality of the STO layer was well secured after the separation

Tune in the Net with RealAudio.

Science.gov (United States)

Buchanan, Larry

1997-01-01

Describes how to connect to the RealAudio Web site to download a player that provides sound from Web pages to the computer through streaming technology. Explains hardware and software requirements and provides addresses for other RealAudio Web sites are provided, including weather information and current news. (LRW)

Overcurrent experiments on HTS tape and cable conductor

DEFF Research Database (Denmark)

Tønnesen, Ole; Jensen, Kim Høj; Træholt, Chresten

2001-01-01

their critical current. In this light, it is important to investigate the response of HTS tapes and cable conductors to overcurrents several times the critical current. A number of experiments have been performed on HTS tapes and cable conductors, with currents up to 20 times the critical current. During...... overcurrent experiments, the voltage, and the temperature were measured as functions of time in order to investigate the dynamic behavior of the HTS tape and cable conductor. After each experiment, damage to the superconductors was assessed by measuring the critical current. Preliminary results show...... that within seconds an HTS tape (critical current=17 A) heats above room temperature with an overcurrent larger than 140 A. Similar overcurrent experiments showed that a HTS cable conductor could sustain damage with overcurrents exceeding 10 times the critical current of the cable conductor....

Superconducting flat tape cable magnet

Science.gov (United States)

Takayasu, Makoto

2015-08-11

A method for winding a coil magnet with the stacked tape cables, and a coil so wound. The winding process is controlled and various shape coils can be wound by twisting about the longitudinal axis of the cable and bending following the easy bend direction during winding, so that sharp local bending can be obtained by adjusting the twist pitch. Stack-tape cable is twisted while being wound, instead of being twisted in a straight configuration and then wound. In certain embodiments, the straight length should be half of the cable twist-pitch or a multiple of it.

The immediate effects of taping therapy on knee pain and depression in patients with degenerative arthritis.

Science.gov (United States)

Han, Ji-Won; Lee, Dong-Kyu; Park, Chi-Bok

2018-05-01

[Purpose] This study aims to identify the immediate effects of taping therapy on knee pain and depression among patients with degenerative arthritis. [Subjects and Methods] In total, 32 patients with degenerative arthritis were randomly assigned to one of two groups: the experimental group that underwent taping therapy and the control group that underwent regular treatment (16 patients per group). In the experimental group, therapeutic tape was wrapped all around the knee joint. Pain and depression were measured using the visual analogue scale (VAS) and the Beck Depression Inventory (BDI), respectively. [Results] The intra-group comparison showed significant differences in VAS and BDI for the experimental group. The intergroup comparison showed that the differences in VAS and BDI within the experimental group appeared significant relative to the control group. [Conclusion] It was observed that taping therapy showed an immediate effect in decreasing knee pain and depression among patients with degenerative arthritis.

Car audio using DSP for active sound control. DSP ni yoru active seigyo wo mochiita audio

Energy Technology Data Exchange (ETDEWEB)

Yamada, K.; Asano, S.; Furukawa, N. (Mitsubishi Motor Corp., Tokyo (Japan))

1993-06-01

In the automobile cabin, there are some unique problems which spoil the quality of sound reproduction from audio equipment, such as the narrow space and/or the background noise. The audio signal processing by using DSP (digital signal processor) makes enable a solution to these problems. A car audio with a high amenity has been successfully made by the active sound control using DSP. The DSP consists of an adder, coefficient multiplier, delay unit, and connections. For the actual processing by DSP, are used functions, such as sound field correction, response and processing of noises during driving, surround reproduction, graphic equalizer processing, etc. High effectiveness of the method was confirmed through the actual driving evaluation test. The present paper describes the actual method of sound control technology using DSP. Especially, the dynamic processing of the noise during driving is discussed in detail. 1 ref., 12 figs., 1 tab.

Effects of Patellofemoral Taping on Patellofemoral Joint Alignment and Contact Area During Weight Bearing.

Science.gov (United States)

Ho, Kai-Yu; Epstein, Ryan; Garcia, Ron; Riley, Nicole; Lee, Szu-Ping

2017-02-01

Study Design Controlled laboratory study. Background Although it has been theorized that patellofemoral joint (PFJ) taping can correct patellar malalignment, the effects of PFJ taping techniques on patellar alignment and contact area have not yet been studied during weight bearing. Objective To examine the effects of 2 taping approaches (Kinesio and McConnell) on PFJ alignment and contact area. Methods Fourteen female subjects with patellofemoral pain and PFJ malalignment participated. Each subject underwent a pretaping magnetic resonance imaging (MRI) scan session and 2 MRI scan sessions after the application of the 2 taping techniques, which aimed to correct lateral patellar displacement. Subjects were asked to report their pain level prior to each scan session. During MRI assessment, subjects were loaded with 25% of body weight on their involved/more symptomatic leg at 0°, 20°, and 40° of knee flexion. The outcome measures included patellar lateral displacement (bisect-offset [BSO] index), mediolateral patellar tilt angle, patellar height (Insall-Salvati ratio), contact area, and pain. Patellofemoral joint alignment and contact area were compared among the 3 conditions (no tape, Kinesio, and McConnell) at 3 knee angles using a 2-factor, repeated-measures analysis of variance. Pain was compared among the 3 conditions using the Friedman test and post hoc Wilcoxon signed-rank tests. Results Our data did not reveal any significant effects of either McConnell or Kinesio taping on the BSO index, patellar tilt angle, Insall-Salvati ratio, or contact area across the 3 knee angles, whereas knee angle had a significant effect on the BSO index and contact area. A reduction in pain was observed after the application of the Kinesio taping technique. Conclusion In a weight-bearing condition, this preliminary study did not support the use of PFJ taping as a medial correction technique to alter the PFJ contact area or alignment of the patella. J Orthop Sports Phys Ther 2017

Portable audio electronics for impedance-based measurements in microfluidics

International Nuclear Information System (INIS)

Wood, Paul; Sinton, David

2010-01-01

We demonstrate the use of audio electronics-based signals to perform on-chip electrochemical measurements. Cell phones and portable music players are examples of consumer electronics that are easily operated and are ubiquitous worldwide. Audio output (play) and input (record) signals are voltage based and contain frequency and amplitude information. A cell phone, laptop soundcard and two compact audio players are compared with respect to frequency response; the laptop soundcard provides the most uniform frequency response, while the cell phone performance is found to be insufficient. The audio signals in the common portable music players and laptop soundcard operate in the range of 20 Hz to 20 kHz and are found to be applicable, as voltage input and output signals, to impedance-based electrochemical measurements in microfluidic systems. Validated impedance-based measurements of concentration (0.1–50 mM), flow rate (2–120 µL min −1 ) and particle detection (32 µm diameter) are demonstrated. The prevailing, lossless, wave audio file format is found to be suitable for data transmission to and from external sources, such as a centralized lab, and the cost of all hardware (in addition to audio devices) is ∼10 USD. The utility demonstrated here, in combination with the ubiquitous nature of portable audio electronics, presents new opportunities for impedance-based measurements in portable microfluidic systems. (technical note)

Methods of Measuring Stress Relaxation in Composite Tape Springs

Science.gov (United States)

2015-03-26

10 3. Cure Cycle Recommended for Patz F7 Prepreg . . . . . . . . . . . . . . . . . . . . . 17 4. Typical Stress...unique and dimensionally complex parts. Hand lay-up is the method by which prepreg tape or fibers are laid down and then the matrix is then ‘painted’ on...structure. Hand lay-up using a prepreg tape stands out as the inexpensive choice for the unique low number production of tape springs and should

Perceived Audio Quality Analysis in Digital Audio Broadcasting Plus System Based on PEAQ

Directory of Open Access Journals (Sweden)

K. Ulovec

2018-04-01

Full Text Available Broadcasters need to decide on bitrates of the services in the multiplex transmitted via Digital Audio Broadcasting Plus system. The bitrate should be set as low as possible for maximal number of services, but with high quality, not lower than in conventional analog systems. In this paper, the objective method Perceptual Evaluation of Audio Quality is used to analyze the perceived audio quality for appropriate codecs --- MP2 and AAC offering three profiles. The main aim is to determine dependencies on the type of signal --- music and speech, the number of channels --- stereo and mono, and the bitrate. Results indicate that only MP2 codec and AAC Low Complexity profile reach imperceptible quality loss. The MP2 codec needs higher bitrate than AAC Low Complexity profile for the same quality. For the both versions of AAC High-Efficiency profiles, the limit bitrates are determined above which less complex profiles outperform the more complex ones and higher bitrates above these limits are not worth using. It is shown that stereo music has worse quality than stereo speech generally, whereas for mono, the dependencies vary upon the codec/profile. Furthermore, numbers of services satisfying various quality criteria are presented.

Rapid prototyping of microfluidic systems using a PDMS/polymer tape composite.

Science.gov (United States)

Kim, Jungkyu; Surapaneni, Rajesh; Gale, Bruce K

2009-05-07

Rapid prototyping of microfluidic systems using a combination of double-sided tape and PDMS (polydimethylsiloxane) is introduced. PDMS is typically difficult to bond using adhesive tapes due to its hydrophobic nature and low surface energy. For this reason, PDMS is not compatible with the xurography method, which uses a knife plotter and various adhesive coated polymer tapes. To solve these problems, a PDMS/tape composite was developed and demonstrated in microfluidic applications. The PDMS/tape composite was created by spinning it to make a thin layer of PDMS over double-sided tape. Then the PDMS/tape composite was patterned to create channels using xurography, and bonded to a PDMS slab. After removing the backing paper from the tape, a complete microfluidic system could be created by placing the construct onto nearly any substrate; including glass, plastic or metal-coated glass/silicon substrates. The bond strength was shown to be sufficient for the pressures that occur in typical microfluidic channels used for chemical or biological analysis. This method was demonstrated in three applications: standard microfluidic channels and reactors, a microfluidic system with an integrated membrane, and an electrochemical biosensor. The PDMS/tape composite rapid prototyping technique provides a fast and cost effective fabrication method and can provide easy integration of microfluidic channels with sensors and other components without the need for a cleanroom facility.

Ankle taping does not impair performance in jump or balance tests.

Science.gov (United States)

Abián-Vicén, Javier; Alegre, Luis M; Fernández-Rodríguez, J Manuel; Lara, Amador J; Meana, Marta; Aguado, Xavier

2008-01-01

This study aimed to investigate the influence of prophylactic ankle taping on two balance tests (static and dynamic balance) and one jump test, in the push off and the landing phase. Fifteen active young subjects (age: 21.0 ± 4.4 years) without previous ankle injuries volunteered for the study. Each participant performed three tests in two different situations: with taping and without taping. The tests were a counter movement jump, static balance, and a dynamic posturography test. The tests and conditions were randomly performed. The path of the center of pressures was measured in the balance tests, and the vertical ground reaction forces were recorded during the push-off and landing phases of the counter movement jump. Ankle taping had no influence on balance performance or in the push off phase of the jump. However, the second peak vertical force value during the landing phase of the jump was 12% greater with ankle taping (0.66 BW, 95% CI -0.64 to 1.96). The use of prophylactic ankle taping had no influence on the balance or jump performance of healthy young subjects. In contrast, the taped ankle increased the second peak vertical force value, which could be related to a greater risk of injury produced by the accumulation of repeated impacts in sports where jumps are frequently performed. Key pointsAnkle taping has no influence on balance performance.Ankle taping does not impair performance during the push-off phase of the jump.Ankle taping could increase the risk of injury during landings by increasing peak forces.

Pediatric Tape: Accuracy and Medication Delivery in the National Park Service

Directory of Open Access Journals (Sweden)

Danielle D. Campagne

2015-10-01

Full Text Available Introduction: The objective is to evaluate the accuracy of medication dosing and the time to medication administration in the prehospital setting using a novel length-based pediatric emergency resuscitation tape. Methods: This study was a two-period, two-treatment crossover trial using simulated pediatric patients in the prehospital setting. Each participant was presented with two emergent scenarios; participants were randomized to which case they encountered first, and to which case used the National Park Service (NPS emergency medical services (EMS length-based pediatric emergency resuscitation tape. In the control (without tape case, providers used standard methods to determine medication dosing (e.g. asking parents to estimate the patient’s weight; in the intervention (with tape case, they used the NPS EMS length-based pediatric emergency resuscitation tape. Each scenario required dosing two medications (Case 1 [febrile seizure] required midazolam and acetaminophen; Case 2 [anaphylactic reaction] required epinephrine and diphenhydramine. Twenty NPS EMS providers, trained at the Parkmedic/Advanced Emergency Medical Technician level, served as study participants. Results: The only medication errors that occurred were in the control (no tape group (without tape: 5 vs. with tape: 0, p=0.024. Time to determination of medication dose was significantly shorter in the intervention (with tape group than the control (without tape group, for three of the four medications used. In case 1, time to both midazolam and acetaminophen was significantly faster in the intervention (with tape group (midazolam: 8.3 vs. 28.9 seconds, p=0.005; acetaminophen: 28.6 seconds vs. 50.6 seconds, p=0.036. In case 2, time to epinephrine did not differ (23.3 seconds vs. 22.9 seconds, p=0.96, while time to diphenhydramine was significantly shorter in the intervention (with tape group (13 seconds vs. 37.5 seconds, p<0.05. Conclusion: Use of a length-based pediatric emergency

Modified DCTNet for audio signals classification

Science.gov (United States)

Xian, Yin; Pu, Yunchen; Gan, Zhe; Lu, Liang; Thompson, Andrew

2016-10-01

In this paper, we investigate DCTNet for audio signal classification. Its output feature is related to Cohen's class of time-frequency distributions. We introduce the use of adaptive DCTNet (A-DCTNet) for audio signals feature extraction. The A-DCTNet applies the idea of constant-Q transform, with its center frequencies of filterbanks geometrically spaced. The A-DCTNet is adaptive to different acoustic scales, and it can better capture low frequency acoustic information that is sensitive to human audio perception than features such as Mel-frequency spectral coefficients (MFSC). We use features extracted by the A-DCTNet as input for classifiers. Experimental results show that the A-DCTNet and Recurrent Neural Networks (RNN) achieve state-of-the-art performance in bird song classification rate, and improve artist identification accuracy in music data. They demonstrate A-DCTNet's applicability to signal processing problems.

The experience of childbrith in first-time mothers who received narcotic analgesics during the first stage of labour

Directory of Open Access Journals (Sweden)

L. Jantjes

2007-09-01

Full Text Available This research has focused on the birthing experience of first-time mothers who received the narcotic analgesic combination of Pethidine and Hydroxyzine during the first stage of labour. A qualitative research methodology was used to collect data. Unstructured interviews were held with first-time mothers to obtain accounts of their experience of childbirth. These narrations were audio-taped while the participants were still being cared for in the postnatal ward of the hospital where delivery took place. Nine interviews were conducted with first-time mothers who gave birth normally vaginally after a normal pregnancy and who received a narcotic analgesic in the first stage of labour. The transcribed interviews were analyzed using Tesch’s method of descriptive analysis (in Creswell, 1994:115.

Prevalence of and risk factors for methamphetamine use in northern Thai youth: results of an audio-computer-assisted self-interviewing survey with urine testing.

Science.gov (United States)

Sattah, Martin V; Supawitkul, Somsak; Dondero, Timothy J; Kilmarx, Peter H; Young, Nancy L; Mastro, Timothy D; Chaikummao, Supaporn; Manopaiboon, Chomnad; Griensven, Frits van

2002-07-01

Data from drug treatment facilities, drug seizures and drug arrests suggest rapidly increasing methamphetamine use by adolescents in Thailand. However, limited quantitative data are available about the prevalence of its use or correlates of use. The purpose of our study was therefore to estimate the prevalence of methamphetamine use and to identify possible risk factors. Cross-sectional survey using anonymous audio-computer-assisted self-interview and urine specimen analysis. Chiang Rai Province, Thailand. 1725 students, 15-21 years of age (893 male and 832 female) attending one of three vocational schools in Chiang Rai Province. Three hundred and fifty male and 150 female students reported a history of having ever used methamphetamine. In addition, 128 male and 49 female students had positive urine test results, indicating recent methamphetamine use; 27 of these students denied having ever used methamphetamine. According to history, urine test, or both, 41.3% of male students and 19.0% of female students used methamphetamine. In multivariate analysis, methamphetamine use was highly correlated with the use of other substances, sexual activity, peer pressure, positive attitudes toward methamphetamine, and absence of a family confidant. Methamphetamine use is common among adolescent students in northern Thailand. Demographic, behavioral and psychosocial correlates of methamphetamine use identified in this study may be helpful for the design and implementation of preventive interventions.

TiO2/water Nanofluid Heat Transfer in Heat Exchanger Equipped with Double Twisted-Tape Inserts

Science.gov (United States)

Eiamsa-ard, S.; Ketrain, R.; Chuwattanakul, V.

2018-05-01

Nowadays, heat transfer enhancement plays an important role in improving efficiency of heat transfer and thermal systems for numerous areas such as heat recovery processes, chemical reactors, air-conditioning/refrigeration system, food engineering, solar air/water heater, cooling of high power electronics etc. The present work presents the experimental results of the heat transfer enhancement of TiO2/water nanofluid in a heat exchanger tube fitted with double twisted tapes. The study covered twist ratios of twisted tapes (y/w) of 1.5, 2.0, and 2.5) while the concentration of the nanofluid was kept constant at 0.05% by volume. Observations show that heat transfer, friction loss and thermal performance increase as twist ratio (y/w) decreases. The use of the nanofluid in the tube equipped with the double twisted-tapes with the smallest twist ratio (y/w = 1.5) results in the increases of heat transfer rates and friction factor up to 224.8% and 8.98 times, respectively as compared to those of water. In addition, the experimental results performed that double twisted tapes induced dual swirling-flows which played an important role in improving fluid mixing and heat transfer enhancement. It is also observed that the TiO2/water nanofluid was responsible for low pressure loss behaviors.

The Fungible Audio-Visual Mapping and its Experience

Directory of Open Access Journals (Sweden)

Adriana Sa

2014-12-01

Full Text Available This article draws a perceptual approach to audio-visual mapping. Clearly perceivable cause and effect relationships can be problematic if one desires the audience to experience the music. Indeed perception would bias those sonic qualities that fit previous concepts of causation, subordinating other sonic qualities, which may form the relations between the sounds themselves. The question is, how can an audio-visual mapping produce a sense of causation, and simultaneously confound the actual cause-effect relationships. We call this a fungible audio-visual mapping. Our aim here is to glean its constitution and aspect. We will report a study, which draws upon methods from experimental psychology to inform audio-visual instrument design and composition. The participants are shown several audio-visual mapping prototypes, after which we pose quantitative and qualitative questions regarding their sense of causation, and their sense of understanding the cause-effect relationships. The study shows that a fungible mapping requires both synchronized and seemingly non-related components – sufficient complexity to be confusing. As the specific cause-effect concepts remain inconclusive, the sense of causation embraces the whole. 

Delamination behaviour in differently copper laminated REBCO coated conductor tapes under transverse loading

Energy Technology Data Exchange (ETDEWEB)

Gorospe, Alking [Department of Mechanical Design Engineering, Andong National University, 1375 Kyungdong-Ro, Andong 760-749 (Korea, Republic of); Department of Engineering, Aurora State College of Technology, Baler Aurora 3200 (Philippines); Nisay, Arman [Department of Mechanical Design Engineering, Andong National University, 1375 Kyungdong-Ro, Andong 760-749 (Korea, Republic of); Shin, Hyung-Seop, E-mail: hsshin@andong.ac.kr [Department of Mechanical Design Engineering, Andong National University, 1375 Kyungdong-Ro, Andong 760-749 (Korea, Republic of)

2014-09-15

Highlights: • I{sub c} degradation behavior under transverse tension loading in different CC tape structure. • Weibull distribution analysis applied on delamination mechanism of CC tape. • Delamination mechanism on CC tapes depending on copper lamination type. • SEM and WDS mapping analysis of delamination sites under transverse loading. - Abstract: Laminated HTS coated conductor (CC) tapes having a unique multi-layer structure made them vulnerable when exposed to transverse loading. Electromechanical transport properties of these CC tapes can be affected by excessive transverse stresses. Due to the coefficient of thermal expansion (CTE) mismatch and incompatibility among constituent materials used in coil applications, delamination among layers occurs and causes critical current, I{sub c} degradation in the CC tapes. In this study, the delamination behaviors in copper (Cu) solder-laminated CC tapes by soldering and surround Cu-stabilized ones by electroplating under transverse tension loading were investigated. Similarly to the surround Cu-stabilized CC tapes in our previous reports, the Cu solder-laminated CC tapes also showed an abrupt and gradual I{sub c} degradation behavior. However, the Cu solder-laminated CC tapes showed different delamination morphologies as compared to the surround Cu-stabilized CC tapes; the superconducting side and the substrate side of the Cu solder laminated CC tapes were totally separated by delamination. On the other hand, the brass laminate did not show any significant effect on the delamination strength when it is added upon the surround Cu-stabilized CC tapes.

Efficiency Optimization in Class-D Audio Amplifiers

DEFF Research Database (Denmark)

Yamauchi, Akira; Knott, Arnold; Jørgensen, Ivan Harald Holger

2015-01-01

This paper presents a new power efficiency optimization routine for designing Class-D audio amplifiers. The proposed optimization procedure finds design parameters for the power stage and the output filter, and the optimum switching frequency such that the weighted power losses are minimized under...... the given constraints. The optimization routine is applied to minimize the power losses in a 130 W class-D audio amplifier based on consumer behavior investigations, where the amplifier operates at idle and low power levels most of the time. Experimental results demonstrate that the optimization method can...... lead to around 30 % of efficiency improvement at 1.3 W output power without significant effects on both audio performance and the efficiency at high power levels....

Adhesive tape exfoliation

DEFF Research Database (Denmark)

Bohr, Jakob

2015-01-01

Single-crystal graphite can be cleaved by the use of an adhesive tape. This was also the initial route for obtaining graphene, a one-layer thick graphite slab. In this letter a few simple and fun considerations are presented in an attempt to shed some light on why this procedure is successful...

New Interview and Observation Measures of the Broader Autism Phenotype: Group Differentiation

Science.gov (United States)

de Jonge, Maretha; Parr, Jeremy; Rutter, Michael; Wallace, Simon; Kemner, Chantal; Bailey, Anthony; van Engeland, Herman; Pickles, Andrew

2015-01-01

To identify the broader autism phenotype (BAP), the Family History Interview subject and informant versions and an observational tool (Impression of Interviewee), were developed. This study investigated whether the instruments differentiated between parents of children with autism, and parents of children with Down syndrome (DS). The BAP scores of…

Kinesio® Tape Barrier Does Not Inhibit Intramuscular Cooling During Cryotherapy.

Science.gov (United States)

Lyman, Katie J; McCrone, Michael; Hanson, Thomas A; Mellinger, Christopher D; Gange, Kara

2018-05-29

Allied health care professionals commonly apply cryotherapy as treatment for acute musculoskeletal trauma and the associated symptoms. Understanding the impact of a tape barrier on intramuscular temperature can assist in determining treatment duration for effective cryotherapy. To determine whether Kinesio® Tape acts as a barrier that affects intramuscular temperature during cryotherapy application. A repeated-measures, counterbalanced design in which the independent variable was tape application and the dependent variable was muscle temperature as measured by thermocouples placed 1 cm beneath the adipose layer. Additional covariates for robustness were BMI and adipose thickness. University research laboratory. 19 male college students with no contraindications to cryotherapy, no known sensitivity to Kinesio® Tape, and no reported quadriceps injury within the past six months. Topical cryotherapy: crushed-ice bags of 1 kg and 0.5 kg. Intramuscular temperature. The tape barrier had no statistically significant effect on muscle temperature. The pattern of temperature change was indistinguishable between participants with and without tape application. Findings suggest health care professionals can combine cryotherapy with a Kinesio® Tape application without any need for adjustments to cryotherapy duration.

Portable Audio Design

DEFF Research Database (Denmark)

Groth, Sanne Krogh

2014-01-01

attention to the specific genre; a grasping of the complex relationship between site and time, the actual and the virtual; and getting aquatint with the specific site’s soundscape by approaching it both intuitively and systematically. These steps will finally lead to an audio production that not only...

Inertial and stick-slip regimes of unstable adhesive tape peeling.

Science.gov (United States)

Dalbe, Marie-Julie; Villey, Richard; Ciccotti, Matteo; Santucci, Stéphane; Cortet, Pierre-Philippe; Vanel, Loïc

2016-05-18

We present an experimental characterization of the detachment front unstable dynamics observed during the peeling of pressure sensitive adhesives. We use an experimental set-up specifically designed to control the peeling angle θ and the peeled tape length L, while peeling an adhesive tape from a flat substrate at a constant driving velocity V. High-speed imaging allows us to report the evolution of the period and amplitude of the front oscillations, as well as the relative durations of their fast and slow phases, as a function of the control parameters V, L and θ. Our study shows that, as the driving velocity or the peeling angle increases, the oscillations of the peeling front progressively evolve from genuine "stick-slip" oscillations, made of alternating long stick phases and very brief slip phases, to sinusoidal oscillations of amplitude twice the peeling velocity. We propose a model which, taking into account the peeling angle-dependent kinetic energy cost to accelerate and decelerate the peeled tape, explains the transition from the "stick-slip" to the "inertial" regime of the dynamical instability. Using independent direct measurements of the effective fracture energy of the adhesive-substrate joint, we show that our model quantitatively accounts for the two regimes of the unstable dynamics.

Enhancement of turbulent flow heat transfer in a tube with modified twisted tapes

Energy Technology Data Exchange (ETDEWEB)

Lei, Y.G.; Zhao, C.H.; Song, C.F. [College of Environmental Science and Engineering, Taiyuan University of Technology, Taiyuan (China)

2012-12-15

Numerical simulations were performed to study the fluid flow and heat transfer in a tube with staggered twisted tapes with central holes. In the range of Reynolds numbers between 6000 and 28 000, the modified twisted tapes increased the Nusselt number by 76.2 {proportional_to} 149.7 % and the friction factor by 380.2 {proportional_to} 443.8 % compared to the smooth tube. Compared to the typical twisted tapes, the modified twisted tapes produced an acceleration flow through the triangle regions leading to the enhancement of heat transfer, and the holes in the modified tapes reduced the severe pressure loss. It was found that the modified twisted tapes decreased the friction factor by 8.0 {proportional_to} 16.1 % and enhanced the heat transfer by 34.1 {proportional_to} 46.8 % in comparison with the typical tapes. These results indicated that the performance ratio values of the tube with modified twisted tapes were higher than 1.0 in the range of Reynolds numbers studied. The computed performance ratios of the tube with modified twisted tapes were much higher than those of the tube with typical twisted tapes. This means that the integrated performance of the tube with staggered twisted tapes with central holes is superior to that of the tube with typical twisted tapes. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

AUDIO CRYPTANALYSIS- AN APPLICATION OF SYMMETRIC KEY CRYPTOGRAPHY AND AUDIO STEGANOGRAPHY

Directory of Open Access Journals (Sweden)

Smita Paira

2016-09-01

Full Text Available In the recent trend of network and technology, “Cryptography” and “Steganography” have emerged out as the essential elements of providing network security. Although Cryptography plays a major role in the fabrication and modification of the secret message into an encrypted version yet it has certain drawbacks. Steganography is the art that meets one of the basic limitations of Cryptography. In this paper, a new algorithm has been proposed based on both Symmetric Key Cryptography and Audio Steganography. The combination of a randomly generated Symmetric Key along with LSB technique of Audio Steganography sends a secret message unrecognizable through an insecure medium. The Stego File generated is almost lossless giving a 100 percent recovery of the original message. This paper also presents a detailed experimental analysis of the algorithm with a brief comparison with other existing algorithms and a future scope. The experimental verification and security issues are promising.

Molten carbonate fuel cell integral matrix tape and bubble barrier

International Nuclear Information System (INIS)

Reiser, C.A.; Maricle, D.L.

1983-01-01

A molten carbonate fuel cell matrix material is described made up of a matrix tape portion and a bubble barrier portion. The matrix tape portion comprises particles inert to molten carbonate electrolyte, ceramic particles and a polymeric binder, the matrix tape being flexible, pliable and having rubber-like compliance at room temperature. The bubble barrier is a solid material having fine porosity preferably being bonded to the matrix tape. In operation in a fuel cell, the polymer binder burns off leaving the matrix and bubble barrier providing superior sealing, stability and performance properties to the fuel cell stack

Fabrication of laminated Bi-2212/Ag multifilamentary tape

Science.gov (United States)

Yuan, D.-W.; Majer, W. J.; Francavilla, T. L.

2000-03-01

The powder-in-tube (PIT) process has been successfully used to make long lengths of Ag-sheathed oxide superconductors. A modified PIT approach is proposed to fabricate conductors with laminated Bi-2212 configurations. Ag/Bi-2212 tapes consisting of seven laminae were produced with various thicknesses ranging from 0.38 to 0.25 mm. The use of a turkshead was found to be beneficial, yielding tapes with good dimensional integrity and consistency. Critical current density (Jc ) values greater than 105 A cm-2 (0.01 T and Bicons/Journals/Common/perp" ALT="perp" ALIGN="TOP"/> tape surface) have been attained for tapes of different thicknesses. Nonetheless, Jc was found to be related to the average thickness of individual Bi-2212 lamina. It is believed that excessive cold working accounts for the decrease in Jc with decreasing size below a threshold value. The enhancement of Jc is attributed to the high Bi-2212 grain alignment along the Ag-oxide interfaces and uniform dimensions within the laminate conductors.

Adaptive DCTNet for Audio Signal Classification

OpenAIRE

Xian, Yin; Pu, Yunchen; Gan, Zhe; Lu, Liang; Thompson, Andrew

2016-01-01

In this paper, we investigate DCTNet for audio signal classification. Its output feature is related to Cohen's class of time-frequency distributions. We introduce the use of adaptive DCTNet (A-DCTNet) for audio signals feature extraction. The A-DCTNet applies the idea of constant-Q transform, with its center frequencies of filterbanks geometrically spaced. The A-DCTNet is adaptive to different acoustic scales, and it can better capture low frequency acoustic information that is sensitive to h...

Fall Detection Using Smartphone Audio Features.

Science.gov (United States)

Cheffena, Michael

2016-07-01

An automated fall detection system based on smartphone audio features is developed. The spectrogram, mel frequency cepstral coefficents (MFCCs), linear predictive coding (LPC), and matching pursuit (MP) features of different fall and no-fall sound events are extracted from experimental data. Based on the extracted audio features, four different machine learning classifiers: k-nearest neighbor classifier (k-NN), support vector machine (SVM), least squares method (LSM), and artificial neural network (ANN) are investigated for distinguishing between fall and no-fall events. For each audio feature, the performance of each classifier in terms of sensitivity, specificity, accuracy, and computational complexity is evaluated. The best performance is achieved using spectrogram features with ANN classifier with sensitivity, specificity, and accuracy all above 98%. The classifier also has acceptable computational requirement for training and testing. The system is applicable in home environments where the phone is placed in the vicinity of the user.

Recovery time of high temperature superconducting tapes exposed in liquid nitrogen

International Nuclear Information System (INIS)

Sheng, Jie; Zeng, Weina; Yao, Zhihao; Zhao, Anfeng; Hu, Daoyu; Hong, Zhiyong

2016-01-01

Highlights: • A novel method based on a sequence of AC pulses is presented. • Liquid nitrogen temperature is used as criterion to judge whether the sample has recovered. • Recovery time of some tape doesn't increase with the amplitude of fault current. • This phenomenon is caused by boiling heat transfer process of liquid nitrogen. • This phenomenon can be used in optimizing both the limiting rate and reclosing system. - Abstract: The recovery time is a crucial parameter to high temperature superconducting tapes, especially in power applications. The cooperation between the reclosing device and the superconducting facilities mostly relies on the recovery time of the superconducting tapes. In this paper, a novel method is presented to measure the recovery time of several different superconducting samples. In this method criterion used to judge whether the sample has recovered is the liquid nitrogen temperature, instead of the critical temperature. An interesting phenomenon is observed during the testing of superconducting samples exposed in the liquid nitrogen. Theoretical explanations of this phenomenon are presented from the aspect of heat transfer. Optimization strategy of recovery characteristics based on this phenomenon is also briefly discussed.

Untitled

Indian Academy of Sciences (India)

tow loss Antenna cores Computer ofes Rodio and Magnetic. High updcores Television Magnetic cords ow Audio tapes isks. : accorrier Wideo tapes high stol cores holds. isilly Magnetic Recording Computer tape. O S Telecommunicati cetostrict VSticient cores Os M oud speckers wstricters ters Rober lectromagneta Frogrets.

Peeling-angle dependence of the stick-slip instability during adhesive tape peeling.

Science.gov (United States)

Dalbe, Marie-Julie; Santucci, Stéphane; Vanel, Loïc; Cortet, Pierre-Philippe

2014-12-28

The influence of peeling angle on the dynamics observed during the stick-slip peeling of an adhesive tape has been investigated. This study relies on a new experimental setup for peeling at a constant driving velocity while keeping constant the peeling angle and peeled tape length. The thresholds of the instability are shown to be associated with a subcritical bifurcation and bistability of the system. The velocity onset of the instability is moreover revealed to strongly depend on the peeling angle. This could be the consequence of peeling angle dependance of either the fracture energy of the adhesive-substrate joint or the effective stiffness at play between the peeling front and the point at which the peeling is enforced. The shape of the peeling front velocity fluctuations is finally shown to progressively change from typical stick-slip relaxation oscillations to nearly sinusoidal oscillations as the peeling angle is increased. We suggest that this transition might be controlled by inertial effects possibly associated with the propagation of the peeling force fluctuations through elongation waves in the peeled tape.

Audio-Tutorial Instruction: A Strategy For Teaching Introductory College Geology.

Science.gov (United States)

Fenner, Peter; Andrews, Ted F.

The rationale of audio-tutorial instruction is discussed, and the history and development of the audio-tutorial botany program at Purdue University is described. Audio-tutorial programs in geology at eleven colleges and one school are described, illustrating several ways in which programs have been developed and integrated into courses. Programs…

Effects of kinesio taping and hot packs on premenstrual syndrome in females.

Science.gov (United States)

Choi, Jung-Hyun

2017-09-01

[Purpose] This study aimed to evaluate the effects of taping and hot packs on premenstrual syndrome, in an attempt to generate basic data for physical therapy intervention for premenstrual syndrome. [Subjects and Methods] Thirty-two females in their 20s with premenstrual syndrome were randomly assigned to a taping group (n=10), hot pack group (n=11), and taping with hot pack group (n=11). Premenstrual syndrome was assessed using the Menstrual Distress Questionnaire in each participant prior to intervention and was re-assessed after applying kinesio taping and/or hot pack from 10 days before the estimated date of menstruation until the first day of menstruation. [Results] Data revealed that the taping and taping with hot pack groups showed significantly reduced premenstrual syndrome following intervention. In terms of the differences in the Menstrual Distress Questionnaire total score among the groups, the taping with hot pack and hot pack groups showed a significant difference. [Conclusion] These findings indicate that kinesio taping is an easy, non-drug intervention for female college students with premenstrual syndrome.

Sputtered thin films for high density tape recording

NARCIS (Netherlands)

Nguyen, L.T.

This thesis describes the investigation of sputtered thin film media for high density tape recording. As discussed in Chapter 1, to meet the tremendous demand of data storage, the density of recording tape has to be increased continuously. For further increasing the bit density the key factors are:

StorageTek RedWood SD-3 tape drive

CERN Multimedia

1995-01-01

A helical scan recording drive, with a high-speed rotating head sweeping across the tape every few micrometers. Based on a professional video recording system, modified to be suitable for digital data recording. These are commonly used with large computer systems, typically in conjunction with a robotic tape library.

An automated magnetic tape vault at CERN computer center

CERN Multimedia

Claudia Marcelloni

2008-01-01

The rapidly changing data processing landscape the underlying long-term storage technology remains the tried and tested magnetic tape. This robust and mature technology is used to store the complete LHC data set, from which a fraction of the data is copied to overlying disk caches for fast and widespread access. The handling of the magnetic tape cartridges is now fully automated, as they are racked in vaults where they are moved between the storage shelves and the tape drives by robotic arms.

Optimized Audio Classification and Segmentation Algorithm by Using Ensemble Methods

Directory of Open Access Journals (Sweden)

Saadia Zahid

2015-01-01

Full Text Available Audio segmentation is a basis for multimedia content analysis which is the most important and widely used application nowadays. An optimized audio classification and segmentation algorithm is presented in this paper that segments a superimposed audio stream on the basis of its content into four main audio types: pure-speech, music, environment sound, and silence. An algorithm is proposed that preserves important audio content and reduces the misclassification rate without using large amount of training data, which handles noise and is suitable for use for real-time applications. Noise in an audio stream is segmented out as environment sound. A hybrid classification approach is used, bagged support vector machines (SVMs with artificial neural networks (ANNs. Audio stream is classified, firstly, into speech and nonspeech segment by using bagged support vector machines; nonspeech segment is further classified into music and environment sound by using artificial neural networks and lastly, speech segment is classified into silence and pure-speech segments on the basis of rule-based classifier. Minimum data is used for training classifier; ensemble methods are used for minimizing misclassification rate and approximately 98% accurate segments are obtained. A fast and efficient algorithm is designed that can be used with real-time multimedia applications.

Properties of PTFE tape as a semipermeable membrane in fluorous reactions

OpenAIRE

Brendon A. Parsons; Olivia Lin Smith; Myeong Chae; Veljko Dragojlovic

2015-01-01

Summary In a PTFE tape phase-vanishing reaction (PV-PTFE), a delivery tube sealed with PTFE tape is inserted into a vessel which contains the substrate. The reagent diffuses across the PTFE tape barrier into the reaction vessel. PTFE co-polymer films have been found to exhibit selective permeability towards organic compounds, which was affected by the presence of solvents. In this study, we attempted to establish general trends of permeability of PTFE tape to different compounds and to better...

Audio Description as a Pedagogical Tool

Directory of Open Access Journals (Sweden)

Georgina Kleege

2015-05-01

Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

Extracting meaning from audio signals - a machine learning approach

DEFF Research Database (Denmark)

Larsen, Jan

2007-01-01

* Machine learning framework for sound search * Genre classification * Music and audio separation * Wind noise suppression......* Machine learning framework for sound search * Genre classification * Music and audio separation * Wind noise suppression...

A new method of measurement of tension on a moving magnetic tape

Science.gov (United States)

Kurtinaytis, A. K.; Lauzhinskas, Y. S.

1973-01-01

The possibility of no-contact measurement of the tension on a moving magnetic tape, assuming the tape is uniform, is discussed. A scheme for calculation of the natural frequency of transverse vibrations of magnetic tape is shown. Mathematical models are developed to show the relationships of the parameters. The method is applicable to the analysis of accurate tape feed mechanisms design.

[Efficacy of the application of kinesio tape in patients with stroke].

Science.gov (United States)

Ortiz-Ramirez, J; Perez-De la Cruz, S

2017-02-16

To review the effects achieved by the kinesio tape in patients with stroke in scientific studies published on date and to discuss these findings may be of interest to neurology. An exhaustive search in the main scientific databases using keywords such as kinesio tape, kinesiotaping, musculoskeletal tape, taping medical concept was carried out. Citations of selected articles and scientific papers published on the website of the Spanish Association of Neuromuscular Bandage were analyzed. Experimental, quasi-experimental, clinical trials and case studies published were used, without limit date, with therapeutical treatment purpose provide important results. Eight articles have met the inclusion criteria. There are eight studies that examine the effect on kinesio tape on lower limb, gait and balance in this kind of therapy, even upper limb and swallowing problems that these patients could present. The kinesio tape in neurological patients can be a complementary technique that empirically provides benefits. However, better methodological quality studies demonstrating the effects attributed to him are still needed.

Improvements of ModalMax High-Fidelity Piezoelectric Audio Device

Science.gov (United States)

Woodard, Stanley E.

2005-01-01

ModalMax audio speakers have been enhanced by innovative means of tailoring the vibration response of thin piezoelectric plates to produce a high-fidelity audio response. The ModalMax audio speakers are 1 mm in thickness. The device completely supplants the need to have a separate driver and speaker cone. ModalMax speakers can perform the same applications of cone speakers, but unlike cone speakers, ModalMax speakers can function in harsh environments such as high humidity or extreme wetness. New design features allow the speakers to be completely submersed in salt water, making them well suited for maritime applications. The sound produced from the ModalMax audio speakers has sound spatial resolution that is readily discernable for headset users.

Aurally Aided Visual Search Performance Comparing Virtual Audio Systems

DEFF Research Database (Denmark)

Larsen, Camilla Horne; Lauritsen, David Skødt; Larsen, Jacob Junker

2014-01-01

Due to increased computational power, reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between a HRTF enhanced audio system (3D) and an...... with white dots. The results indicate that 3D audio yields faster search latencies than panning audio, especially with larger amounts of distractors. The applications of this research could fit virtual environments such as video games or virtual simulations.......Due to increased computational power, reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between a HRTF enhanced audio system (3D...

Aurally Aided Visual Search Performance Comparing Virtual Audio Systems

DEFF Research Database (Denmark)

Larsen, Camilla Horne; Lauritsen, David Skødt; Larsen, Jacob Junker

2014-01-01

Due to increased computational power reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between an HRTF enhanced audio system (3D) and an...... with white dots. The results indicate that 3D audio yields faster search latencies than panning audio, especially with larger amounts of distractors. The applications of this research could fit virtual environments such as video games or virtual simulations.......Due to increased computational power reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between an HRTF enhanced audio system (3D...

Recovery of recordings from heat damaged magnetic tapes

Science.gov (United States)

Melugin, J. F.; Obrien, D. E., III

1973-01-01

Damaged tapes can now be repaired at home as long as damage does not extend to layer-to-layer adhesion within tape roll. Splice repaired section into good roll or cassette for copying. Every effort should be made to complete copying on first run, because fidelity in repaired section deteriorates with each repetition.

Modification of critical current in HTSC tape conductors by a ferromagnetic layer

International Nuclear Information System (INIS)

Goemoery, F; Souc, J; Seiler, E; Vojenciak, M; Granados, X

2008-01-01

In some applications of tape conductors from high temperature superconductors (HTSC) the magnetic field is created by the transported current itself. This is e.g. the case of power transmission cables or current leads. Quite complex distribution of local magnetic field determines then the ability of the superconducting element to carry electrical current. We have investigated how much the critical current of a tape conductor can be changed by putting a ferromagnetic layer in the vicinity of the HTSC material. Numerical procedure has been developed to resolve the current and field distribution in such superconductor-ferromagnet composite tape. Theoretical predictions have been confirmed by experiments on sample made from Bi-2223/Ag composite tape. The critical current of such tape can be improved by placing a soft ferromagnetic material at the tape's edges. On the other hand, the calculations show that the ferromagnetic substrate of YBCO coated tape reduces its self-field critical current

Efficiency in audio processing : filter banks and transcoding

NARCIS (Netherlands)

Lee, Jun Wei

2007-01-01

Audio transcoding is the conversion of digital audio from one compressed form A to another compressed form B, where A and B have different compression properties, such as a different bit-rate, sampling frequency or compression method. This is typically achieved by decoding A to an intermediate

Decision-level fusion for audio-visual laughter detection

NARCIS (Netherlands)

Reuderink, B.; Poel, M.; Truong, K.; Poppe, R.; Pantic, M.

2008-01-01

Laughter is a highly variable signal, which can be caused by a spectrum of emotions. This makes the automatic detection of laughter a challenging, but interesting task. We perform automatic laughter detection using audio-visual data from the AMI Meeting Corpus. Audio-visual laughter detection is

Decision-Level Fusion for Audio-Visual Laughter Detection

NARCIS (Netherlands)

Reuderink, B.; Poel, Mannes; Truong, Khiet Phuong; Poppe, Ronald Walter; Pantic, Maja; Popescu-Belis, Andrei; Stiefelhagen, Rainer

Laughter is a highly variable signal, which can be caused by a spectrum of emotions. This makes the automatic detection of laugh- ter a challenging, but interesting task. We perform automatic laughter detection using audio-visual data from the AMI Meeting Corpus. Audio- visual laughter detection is

Content Discovery from Composite Audio : An unsupervised approach

NARCIS (Netherlands)

Lu, L.

2009-01-01

In this thesis, we developed and assessed a novel robust and unsupervised framework for semantic inference from composite audio signals. We focused on the problem of detecting audio scenes and grouping them into meaningful clusters. Our approach addressed all major steps in a general process of

Patients' preferences for participation in treatment decision-making at the end of life: qualitative interviews with advanced cancer patients.

Science.gov (United States)

Brom, Linda; Pasman, H Roeline W; Widdershoven, Guy A M; van der Vorst, Maurice J D L; Reijneveld, Jaap C; Postma, Tjeerd J; Onwuteaka-Philipsen, Bregje D

2014-01-01

Patients are often encouraged to participate in treatment decision-making. Most studies on this subject focus on choosing between different curative treatment types. In the last phase of life treatment decisions differ as they often put more emphasis on weighing quantity against quality of life, such as whether or not to start treatment aimed at life prolongation but with the possibility of side effects. This study aimed to obtain insight into cancer patients' preferences and the reasons for patients' preferred role in treatment decision-making at the end of life. 28 advanced cancer patients were included at the start of their first line treatment. In-depth interviews were held prior to upcoming treatment decisions whether or not to start a life prolonging treatment. The Control Preference Scale was used to start discussing the extent and type of influence patients wanted to have concerning upcoming treatment decision-making. Interviews were audio taped and transcribed. All patients wanted their physician to participate in the treatment decision-making process. The extent to which patients themselves preferred to participate seemed to depend on how patients saw their own role or assessed their own capabilities for participating in treatment decision-making. Patients foresaw a shift in the preferred level of participation to a more active role depending in the later phase of illness when life prolongation would become more limited and quality of life would become more important. Patients vary in how much involvement they would like to have in upcoming treatment decision-making. Individual patients' preferences may change in the course of the illness, with a shift to more active participation in the later phases. Communication about patients' expectations, wishes and preferences for participation in upcoming treatment decisions is of great importance. An approach in which these topics are openly discussed would be beneficial.

Effect of Twisted-Tape Turbulators and Nanofluid on Heat Transfer in a Double Pipe Heat Exchanger

Directory of Open Access Journals (Sweden)

Heydar Maddah

2014-01-01

Full Text Available Heat transfer and overall heat transfer in a double pipe heat exchanger fitted with twisted-tape elements and titanium dioxide nanofluid were studied experimentally. The inner and outer diameters of the inner tube were 8 and 16 mm, respectively, and cold and hot water were used as working fluids in shell side and tube side. The twisted tapes were made from aluminum sheet with tape thickness (d of 1 mm, width (W of 5 mm, and length of 120 cm. Titanium dioxide nanoparticles with a diameter of 30 nm and a volume concentration of 0.01% (v/v were prepared. The effects of temperature, mass flow rate, and concentration of nanoparticles on the overall heat transfer coefficient, heat transfer changes in the turbulent flow regime Re≥2300, and counter current flow were investigated. When using twisted tape and nanofluid, heat transfer coefficient was about 10 to 25 percent higher than when they were not used. It was also observed that the heat transfer coefficient increases with operating temperature and mass flow rate. The experimental results also showed that 0.01% TiO2/water nanofluid with twisted tape has slightly higher friction factor and pressure drop when compared to 0.01% TiO2/water nanofluid without twisted tape. The empirical correlations proposed for friction factor are in good agreement with the experimental data.

Paper-Based Textbooks with Audio Support for Print-Disabled Students.

Science.gov (United States)

Fujiyoshi, Akio; Ohsawa, Akiko; Takaira, Takuya; Tani, Yoshiaki; Fujiyoshi, Mamoru; Ota, Yuko

2015-01-01

Utilizing invisible 2-dimensional codes and digital audio players with a 2-dimensional code scanner, we developed paper-based textbooks with audio support for students with print disabilities, called "multimodal textbooks." Multimodal textbooks can be read with the combination of the two modes: "reading printed text" and "listening to the speech of the text from a digital audio player with a 2-dimensional code scanner." Since multimodal textbooks look the same as regular textbooks and the price of a digital audio player is reasonable (about 30 euro), we think multimodal textbooks are suitable for students with print disabilities in ordinary classrooms.

Huffman coding in advanced audio coding standard

Science.gov (United States)

Brzuchalski, Grzegorz

2012-05-01

This article presents several hardware architectures of Advanced Audio Coding (AAC) Huffman noiseless encoder, its optimisations and working implementation. Much attention has been paid to optimise the demand of hardware resources especially memory size. The aim of design was to get as short binary stream as possible in this standard. The Huffman encoder with whole audio-video system has been implemented in FPGA devices.

How PE tape performs under concrete coating

International Nuclear Information System (INIS)

Dritt, H.J.

1984-01-01

The program objectives were to evaluate the performance of polyethylene tape plant coating and fusion bonded epoxy powder systems with particular respect to the following: 1. Concrete coating application procedures; 2. The shear resistance during laying and retrieving operations of the coating at the various interfaces (a) Pipe and anti-corrosion coating; (b) Anti-corrosion coating and outerwrap; (c) Overlap areas of the anti-corrosion and outerwrap layers; (d) Between concrete and the various corrosion coatings during laying and retrieving operations. 3. Resistance to damage of the coating as a consequence of cracking or slippage of the concrete weight coating. 4. Ability of various coatings to withstand the damage during concrete application by both impact and compression methods; 5. Evaluation of tape and shrink sleeve joint coatings at the cut-back area as well as performance of tape under hot asphalt coating

Outcome of transvaginal mesh and tape removed for pain only.

Science.gov (United States)

Hou, Jack C; Alhalabi, Feras; Lemack, Gary E; Zimmern, Philippe E

2014-09-01

Because there is reluctance to operate for pain, we evaluated midterm outcomes of vaginal mesh and synthetic suburethral tape removed for pain as the only indication. After receiving institutional review board approval we reviewed a prospective database of women without a neurogenic condition who underwent surgery for vaginal mesh or suburethral tape removal with a focus on pain as the single reason for removal and a minimum 6-month followup. The primary outcome was pain level assessed by a visual analog scale (range 0 to 10) at baseline and at each subsequent visit with the score at the last visit used for analysis. Parameters evaluated included demographics, mean time to presentation and type of mesh or tape inserted. From 2005 to 2013, 123 patients underwent surgical removal of mesh (69) and suburethral tape (54) with pain as the only indication. Mean followup was 35 months (range 6 to 59) in the tape group and 22 months (range 6 to 47) in the mesh group. The visual analog scale score decreased from a mean preoperative level of 7.9 to 0.9 postoperatively (p = 0.0014) in the mesh group and from 5.3 to 1.5 (p = 0.00074) in the tape group. Pain-free status, considered a score of 0, was achieved in 81% of tape and 67% of mesh cases, respectively. No statistically significant difference was found between the groups. When pain is the only indication for suburethral tape or vaginal mesh removal, a significant decrease in the pain score can be durably expected after removal in most patients at midterm followup. Copyright © 2014 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Effect of kinesio taping on lower limb joint powers in individuals with genu varum.

Science.gov (United States)

Jafarnezhadgero, AmirAli; Shad, Morteza Madadi; Majlesi, Mahdi; Zago, Matteo

2018-04-01

Therapeutic lateral knee joint muscle taping potentially offers a low-risk, economical and effective alternative for the clinical treatment of light to moderate knee overload, due to misalignment in patients with genu varum. In this study, we aimed at investigating the immediate effect of lateral knee joint muscular kinesio taping on lower limb joint powers, during the stance phase of walking, in individuals with genu varum. Fifteen male subjects with genu varum misalignment (age: 24.2±3.7 years) participated in the study. Subjects performed three walking trials without, and three with, biceps femoris and vastus lateralis kinesio taping. The three-dimensional position coordinate data of reflective markers were collected at 100 Hz using a six-cameras Vicon system (Motion Analysis Corp., UK). Additionally, two Kistler force plates (Kistler AG, Winterthur, Switzerland) were used to record the Ground Reaction Forces (GRF) components at 1000 Hz during stance phase of walking. A three-way ANOVA with post-hoc testing (using paired samples Student's t-test with Bonferroni correction) was performed to compare the power values of lower limb joints before and after the use of KT. With kinesio taping, we observed that the average negative power increased at the ankle level in dominant limb, (P<0.05, 10-20% of gait cycle, GC), and at the knee level in both limbs (10-20% and 60-80% GC). Further, average negative power of the non-dominant knee joint (80-100% GC) and positive power of the non-dominant hip joint (60-80% GC) significantly reduced (P<0.05) in kinesio taping condition. The biomechanical analysis of joint power during walking using kinesio taping provided essential information about the possible mechanisms involved in gait analysis with this intervention in adults with genu varus. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sounding ruins: reflections on the production of an ‘audio drift’

Science.gov (United States)

Gallagher, Michael

2014-01-01

This article is about the use of audio media in researching places, which I term ‘audio geography’. The article narrates some episodes from the production of an ‘audio drift’, an experimental environmental sound work designed to be listened to on a portable MP3 player whilst walking in a ruinous landscape. Reflecting on how this work functions, I argue that, as well as representing places, audio geography can shape listeners’ attention and bodily movements, thereby reworking places, albeit temporarily. I suggest that audio geography is particularly apt for amplifying the haunted and uncanny qualities of places. I discuss some of the issues raised for research ethics, epistemology and spectral geographies. PMID:29708107

Interactive 3D audio: Enhancing awareness of details in immersive soundscapes?

DEFF Research Database (Denmark)

Schmidt, Mikkel Nørgaard; Schwartz, Stephen; Larsen, Jan

2012-01-01

Spatial audio and the possibility of interacting with the audio environment is thought to increase listeners' attention to details in a soundscape. This work examines if interactive 3D audio enhances listeners' ability to recall details in a soundscape. Nine different soundscapes were constructed...

POSTOPERATIVE URINARY RETENTION AND EARLY REPOSITION OF TENSION-FREE VAGINAL TAPE

Directory of Open Access Journals (Sweden)

Marijan Lužnik

2003-12-01

Full Text Available Background. The purpose of this article is to show a possible method of treatment of postoperative urinary retention after an initial tension-free vaginal tape.Methods. From December 1999 to May 2003 we performed one hundred TVT procedures at our department, among them five women had postoperative urinary retention evaluated with catheterization. Revision and reposition of tension-free vaginal tape were performed if retention of urine was over 100 ml.Results. Urinary retention after an initial tension-free vaginal tape was successfully treated by early reposition of tension-free vaginal tape. This resulted in immediate residualfree voiding and continence, which remained unchanged at 6 week and 3 month follow-up.Conclusions. Postoperative urinary retention may be treated by reposition instead of dissection or elongation of the tension-free vaginal tape.

Personalized Audio Systems - a Bayesian Approach

DEFF Research Database (Denmark)

Nielsen, Jens Brehm; Jensen, Bjørn Sand; Hansen, Toke Jansen

2013-01-01

Modern audio systems are typically equipped with several user-adjustable parameters unfamiliar to most users listening to the system. To obtain the best possible setting, the user is forced into multi-parameter optimization with respect to the users's own objective and preference. To address this......, the present paper presents a general inter-active framework for personalization of such audio systems. The framework builds on Bayesian Gaussian process regression in which a model of the users's objective function is updated sequentially. The parameter setting to be evaluated in a given trial is selected...

IELTS speaking instruction through audio/voice conferencing

Directory of Open Access Journals (Sweden)

Hamed Ghaemi

2012-02-01

Full Text Available The currentstudyaimsatinvestigatingtheimpactofAudio/Voiceconferencing,asanewapproachtoteaching speaking, on the speakingperformanceand/orspeakingband score ofIELTScandidates.Experimentalgroupsubjectsparticipated in an audio conferencing classwhile those of the control group enjoyed attending in a traditional IELTS Speakingclass. At the endofthestudy,allsubjectsparticipatedinanIELTSExaminationheldonNovemberfourthin Tehran,Iran.To compare thegroupmeansforthestudy,anindependentt-testanalysiswasemployed.Thedifferencebetween experimental and control groupwasconsideredtobestatisticallysignificant(P<0.01.Thatisthecandidates in experimental group have outperformed the ones in control group in IELTS Speaking test scores.

White House Tapes of the Nixon Administration, 1971 to 1973

Data.gov (United States)

National Archives and Records Administration — This dataset provides information about the Nixon Administration's White House Tapes. The White House Tapes contain sound recordings of President Richard Nixon's...

A high efficiency PWM CMOS class-D audio power amplifier

Energy Technology Data Exchange (ETDEWEB)

Zhu Zhangming; Liu Lianxi; Yang Yintang [Institute of Microelectronics, Xidian University, Xi' an 710071 (China); Lei Han, E-mail: zmyh@263.ne [Xi' an Power-Rail Micro Co., Ltd, Xi' an 710075 (China)

2009-02-15

Based on the difference close-loop feedback technique and the difference pre-amp, a high efficiency PWM CMOS class-D audio power amplifier is proposed. A rail-to-rail PWM comparator with window function has been embedded in the class-D audio power amplifier. Design results based on the CSMC 0.5 mum CMOS process show that the max efficiency is 90%, the PSRR is -75 dB, the power supply voltage range is 2.5-5.5 V, the THD+N in 1 kHz input frequency is less than 0.20%, the quiescent current in no load is 2.8 mA, and the shutdown current is 0.5 muA. The active area of the class-D audio power amplifier is about 1.47 x 1.52 mm{sup 2}. With the good performance, the class-D audio power amplifier can be applied to several audio power systems.

A high efficiency PWM CMOS class-D audio power amplifier

International Nuclear Information System (INIS)

Zhu Zhangming; Liu Lianxi; Yang Yintang; Lei Han

2009-01-01

Based on the difference close-loop feedback technique and the difference pre-amp, a high efficiency PWM CMOS class-D audio power amplifier is proposed. A rail-to-rail PWM comparator with window function has been embedded in the class-D audio power amplifier. Design results based on the CSMC 0.5 μm CMOS process show that the max efficiency is 90%, the PSRR is -75 dB, the power supply voltage range is 2.5-5.5 V, the THD+N in 1 kHz input frequency is less than 0.20%, the quiescent current in no load is 2.8 mA, and the shutdown current is 0.5 μA. The active area of the class-D audio power amplifier is about 1.47 x 1.52 mm 2 . With the good performance, the class-D audio power amplifier can be applied to several audio power systems.

A high efficiency PWM CMOS class-D audio power amplifier

Science.gov (United States)

Zhangming, Zhu; Lianxi, Liu; Yintang, Yang; Han, Lei

2009-02-01

Based on the difference close-loop feedback technique and the difference pre-amp, a high efficiency PWM CMOS class-D audio power amplifier is proposed. A rail-to-rail PWM comparator with window function has been embedded in the class-D audio power amplifier. Design results based on the CSMC 0.5 μm CMOS process show that the max efficiency is 90%, the PSRR is -75 dB, the power supply voltage range is 2.5-5.5 V, the THD+N in 1 kHz input frequency is less than 0.20%, the quiescent current in no load is 2.8 mA, and the shutdown current is 0.5 μA. The active area of the class-D audio power amplifier is about 1.47 × 1.52 mm2. With the good performance, the class-D audio power amplifier can be applied to several audio power systems.

21 CFR 878.4730 - Surgical skin degreaser or adhesive tape solvent.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Surgical skin degreaser or adhesive tape solvent... Surgical skin degreaser or adhesive tape solvent. (a) Identification. A surgical skin degreaser or an adhesive tape solvent is a device that consists of a liquid such as 1,1,2-trichloro-1,2,2-trifluoroethane...

Audio-Visual Fusion for Sound Source Localization and Improved Attention

Energy Technology Data Exchange (ETDEWEB)

Lee, Byoung Gi; Choi, Jong Suk; Yoon, Sang Suk; Choi, Mun Taek; Kim, Mun Sang [Korea Institute of Science and Technology, Daejeon (Korea, Republic of); Kim, Dai Jin [Pohang University of Science and Technology, Pohang (Korea, Republic of)

2011-07-15

Service robots are equipped with various sensors such as vision camera, sonar sensor, laser scanner, and microphones. Although these sensors have their own functions, some of them can be made to work together and perform more complicated functions. AudioFvisual fusion is a typical and powerful combination of audio and video sensors, because audio information is complementary to visual information and vice versa. Human beings also mainly depend on visual and auditory information in their daily life. In this paper, we conduct two studies using audioFvision fusion: one is on enhancing the performance of sound localization, and the other is on improving robot attention through sound localization and face detection.

Audio-Visual Fusion for Sound Source Localization and Improved Attention

International Nuclear Information System (INIS)

Lee, Byoung Gi; Choi, Jong Suk; Yoon, Sang Suk; Choi, Mun Taek; Kim, Mun Sang; Kim, Dai Jin

2011-01-01

Service robots are equipped with various sensors such as vision camera, sonar sensor, laser scanner, and microphones. Although these sensors have their own functions, some of them can be made to work together and perform more complicated functions. AudioFvisual fusion is a typical and powerful combination of audio and video sensors, because audio information is complementary to visual information and vice versa. Human beings also mainly depend on visual and auditory information in their daily life. In this paper, we conduct two studies using audioFvision fusion: one is on enhancing the performance of sound localization, and the other is on improving robot attention through sound localization and face detection

Accelerated aging studies and environmental stability of prototype tamper tapes

Energy Technology Data Exchange (ETDEWEB)

Wright, B.W.; Wright, C.W. [Pacific Northwest Lab., Richland, WA (United States); Bunk, A.R. [Battelle Columbus Lab., OH (United States)] [and others

1995-05-01

This report describes the results of accelerated aging experiments (weathering) conducted on prototype tamper tapes bonded to a variety of surface materials. The prototype tamper tapes were based on the patented Confirm{reg_sign} tamper-indicating technology developed and produced by 3M Company. Tamper tapes bonded to surfaces using pressure sensitive adhesive (PSA) and four rapid-set adhesives were evaluated. The configurations of the PSA-bonded tamper tapes were 1.27-cm-wide Confirm{reg_sign} 1700 windows with vinyl underlay and 2.54-cm-wide Confirm{reg_sign} 1700 windows with vinyl and polyester underlays. The configurations of the rapid-set adhesive-bonded tamper tapes were 2.54-cm-wide Confirm{reg_sign} (1700, 1500 with and without primer, and 1300) windows with vinyl underlay. Surfaces used for bonding included aluminum, steel, stainless steel, Kevlar{reg_sign}, brass, copper, fiberglass/resin with and without gel coat, polyurethane-painted steel, acrylonitrile:butadiene:styrene plastic, polyester fiberglass board, Lexan polycarbonate, and cedar wood. Weathering conditions included a QUV cabinet (ultraviolet light at 60{degrees}C, condensing humidity at 40{degrees}C), a thermal cycling cabinet (-18{degrees}C to 46{degrees}C), a Weather-O-Meter (Xenon lamp), and exposure outdoors in Daytona Beach, Florida. Environmental aging exposures lasted from 7 weeks to 5 months. After exposure, the tamper tapes were visually examined and tested for transfer resistance. Tamper tapes were also exposed to a variety of chemical liquids (including organic solvents, acids, bases, and oxidizing liquids) to determine chemical resistance and to sand to determine abrasion resistance.

Trained student pharmacists’ telephonic collection of patient medication information: Evaluation of a structured interview tool

Science.gov (United States)

Margolis, Amanda R.; Martin, Beth A.; Mott, David A.

2016-01-01

Objective To determine the feasibility and fidelity of student pharmacists collecting patient medication list information using a structured interview tool and the accuracy of documenting the information. The medication lists were used by a community pharmacist to provide a targeted medication therapy management (MTM) intervention. Design Descriptive analysis of patient medication lists collected via telephone interviews. Participants 10 trained student pharmacists collected the medication lists. Intervention Trained student pharmacists conducted audio-recorded telephone interviews with 80 English-speaking community dwelling older adults using a structured interview tool to collect and document medication lists. Main outcome measures Feasibility was measured using the number of completed interviews, the time student pharmacists took to collect the information, and pharmacist feedback. Fidelity to the interview tool was measured by assessing student pharmacists’ adherence to asking all scripted questions and probes. Accuracy was measured by comparing the audio recorded interviews to the medication list information documented in an electronic medical record. Results On average it took student pharmacists 26.7 minutes to collect the medication lists. The community pharmacist said the medication lists were complete and that having the medication lists saved time and allowed him to focus on assessment, recommendations, and education during the targeted MTM session. Fidelity was high with an overall proportion of asked scripted probes of 83.75% (95%CI: 80.62–86.88%). Accuracy was also high for both prescription (95.1%, 95%CI: 94.3–95.8%) and non-prescription (90.5%, 95%CI: 89.4–91.4%) medications. Conclusion Trained student pharmacists were able to use an interview tool to collect and document medication lists with a high degree of fidelity and accuracy. This study suggests that student pharmacists or trained technicians may be able to collect patient medication

Trained student pharmacists' telephonic collection of patient medication information: Evaluation of a structured interview tool.

Science.gov (United States)

Margolis, Amanda R; Martin, Beth A; Mott, David A

2016-01-01

To determine the feasibility and fidelity of student pharmacists collecting patient medication list information using a structured interview tool and the accuracy of documenting the information. The medication lists were used by a community pharmacist to provide a targeted medication therapy management (MTM) intervention. Descriptive analysis of patient medication lists collected with telephone interviews. Ten trained student pharmacists collected the medication lists. Trained student pharmacists conducted audio-recorded telephone interviews with 80 English-speaking, community-dwelling older adults using a structured interview tool to collect and document medication lists. Feasibility was measured using the number of completed interviews, the time student pharmacists took to collect the information, and pharmacist feedback. Fidelity to the interview tool was measured by assessing student pharmacists' adherence to asking all scripted questions and probes. Accuracy was measured by comparing the audio-recorded interviews to the medication list information documented in an electronic medical record. On average, it took student pharmacists 26.7 minutes to collect the medication lists. The community pharmacist said the medication lists were complete and that having the medication lists saved time and allowed him to focus on assessment, recommendations, and education during the targeted MTM session. Fidelity was high, with an overall proportion of asked scripted probes of 83.75% (95% confidence interval [CI], 80.62-86.88%). Accuracy was also high for both prescription (95.1%; 95% CI, 94.3-95.8%) and nonprescription (90.5%; 95% CI, 89.4-91.4%) medications. Trained student pharmacists were able to use an interview tool to collect and document medication lists with a high degree of fidelity and accuracy. This study suggests that student pharmacists or trained technicians may be able to collect patient medication lists to facilitate MTM sessions in the community pharmacy

Dynamically-Loaded Hardware Libraries (HLL) Technology for Audio Applications

DEFF Research Database (Denmark)

Esposito, A.; Lomuscio, A.; Nunzio, L. Di

2016-01-01

In this work, we apply hardware acceleration to embedded systems running audio applications. We present a new framework, Dynamically-Loaded Hardware Libraries or HLL, to dynamically load hardware libraries on reconfigurable platforms (FPGAs). Provided a library of application-specific processors......, we load on-the-fly the specific processor in the FPGA, and we transfer the execution from the CPU to the FPGA-based accelerator. The proposed architecture provides excellent flexibility with respect to the different audio applications implemented, high quality audio, and an energy efficient solution....

A review of lossless audio compression standards and algorithms

Science.gov (United States)

Muin, Fathiah Abdul; Gunawan, Teddy Surya; Kartiwi, Mira; Elsheikh, Elsheikh M. A.

2017-09-01

Over the years, lossless audio compression has gained popularity as researchers and businesses has become more aware of the need for better quality and higher storage demand. This paper will analyse various lossless audio coding algorithm and standards that are used and available in the market focusing on Linear Predictive Coding (LPC) specifically due to its popularity and robustness in audio compression, nevertheless other prediction methods are compared to verify this. Advanced representation of LPC such as LSP decomposition techniques are also discussed within this paper.

WebGL and web audio software lightweight components for multimedia education

Science.gov (United States)

Chang, Xin; Yuksel, Kivanc; Skarbek, Władysław

2017-08-01

The paper presents the results of our recent work on development of contemporary computing platform DC2 for multimedia education usingWebGL andWeb Audio { the W3C standards. Using literate programming paradigm the WEBSA educational tools were developed. It offers for a user (student), the access to expandable collection of WEBGL Shaders and web Audio scripts. The unique feature of DC2 is the option of literate programming, offered for both, the author and the reader in order to improve interactivity to lightweightWebGL andWeb Audio components. For instance users can define: source audio nodes including synthetic sources, destination audio nodes, and nodes for audio processing such as: sound wave shaping, spectral band filtering, convolution based modification, etc. In case of WebGL beside of classic graphics effects based on mesh and fractal definitions, the novel image processing analysis by shaders is offered like nonlinear filtering, histogram of gradients, and Bayesian classifiers.

Red Tape dan Perilaku Masyarakat dalam Pelayanan Izin Usaha Perdagangan di Kota Makassar

OpenAIRE

Lukman, Lukman

2015-01-01

: Red tape as pathology has long been the focus of an expert study of bureaucracy. Early scholarly attempts conceptualized red tape at the individual level as in Merton's classic thesis (1940) about goal displacement. Waldo (1946) one man's red tape is another man's system. Kaufman (1977) one person's red tape may be another's treasured safeguard. Osborne and Gaebler (1992) good people trapped in bad systems. Bozeman and Feneey (2011) red tape is often used as a synonym of the term procedures...

Delamination behaviour of GdBCO coated conductor tapes under transverse tension

International Nuclear Information System (INIS)

Gorospe, A.; Nisay, A.; Dizon, J.R.; Shin, H.S.

2013-01-01

Highlights: •Installation of a test frame which gives precisely aligned transverse load. •Investigation of I c degradation behaviour depending on the type of sample delamination. •Inhomogeneity of the CC tapes caused large variation on delamination strength. •SEM and EDS analysis of delamination sites under transverse loading. -- Abstract: The electromechanical property behaviour of 2G coated conductor (CC) tapes fabricated by multi-layer deposition process both in the in-plane and transverse direction should be understood. The CC tapes are used in the fabrication of epoxy resin-impregnated coils. In such case, the Lorentz force due to the high magnetic field applied as well as the thermal stress due to the difference in coefficient of thermal expansion (CTE) among constituent layers during cooling to cryogenic temperature will induce transversely applied load to the surface of CC tapes in coils. Hence, the CC tape should have a good mechanical property in the transverse direction in order to maintain its superior performance under magnetic field. In this study, a test frame which gives precisely aligned transverse load was devised. Using the fixture, the delamination behaviours including the delamination strength of the GdBCO CC tapes under transverse tensile loading were investigated. Large variation on the delamination strength of the CC tapes was recorded and might have resulted from the slit edge effect and the inhomogeneity of the CC tapes. The I c degradation behaviour under transverse load was related to the location where delamination occurred in the sample

All About Audio Equalization: Solutions and Frontiers

Directory of Open Access Journals (Sweden)

Vesa Välimäki

2016-05-01

Full Text Available Audio equalization is a vast and active research area. The extent of research means that one often cannot identify the preferred technique for a particular problem. This review paper bridges those gaps, systemically providing a deep understanding of the problems and approaches in audio equalization, their relative merits and applications. Digital signal processing techniques for modifying the spectral balance in audio signals and applications of these techniques are reviewed, ranging from classic equalizers to emerging designs based on new advances in signal processing and machine learning. Emphasis is placed on putting the range of approaches within a common mathematical and conceptual framework. The application areas discussed herein are diverse, and include well-defined, solvable problems of filter design subject to constraints, as well as newly emerging challenges that touch on problems in semantics, perception and human computer interaction. Case studies are given in order to illustrate key concepts and how they are applied in practice. We also recommend preferred signal processing approaches for important audio equalization problems. Finally, we discuss current challenges and the uncharted frontiers in this field. The source code for methods discussed in this paper is made available at https://code.soundsoftware.ac.uk/projects/allaboutaudioeq.

Absence, Deviance and Unattainable Ideals--Discourses on Vegetarianism in the Swedish School Subject Home and Consumer Studies

Science.gov (United States)

Bohm, Ingela; Lindblom, Cecilia; Åbacka, Gun; Bengs, Carita; Hörnell, Agneta

2016-01-01

Objective: This study aimed to describe Discourses on vegetarian food in the Swedish school subject Home and Consumer Studies. Design: The study involved the observation of naturally occurring classroom talk, with audio recording and in some cases video-taping. Setting: The study was conducted during Home and Consumer Studies lessons in five…

Class D audio amplifiers for high voltage capacitive transducers

DEFF Research Database (Denmark)

Nielsen, Dennis

of high volume, weight, and cost. High efficient class D amplifiers are now widely available offering power densities, that their linear counterparts can not match. Unlike the technology of audio amplifiers, the loudspeaker is still based on the traditional electrodynamic transducer invented by C.W. Rice......Audio reproduction systems contains two key components, the amplifier and the loudspeaker. In the last 20 – 30 years the technology of audio amplifiers have performed a fundamental shift of paradigm. Class D audio amplifiers have replaced the linear amplifiers, suffering from the well-known issues...... with the low level of acoustical output power and complex amplifier requirements, have limited the commercial success of the technology. Horn or compression drivers are typically favoured, when high acoustic output power is required, this is however at the expense of significant distortion combined...

Nurse practitioner preferences for distance education methods related to learning style, course content, and achievement.

Science.gov (United States)

Andrusyszyn, M A; Cragg, C E; Humbert, J

2001-04-01

The relationships among multiple distance delivery methods, preferred learning style, content, and achievement was sought for primary care nurse practitioner students. A researcher-designed questionnaire was completed by 86 (71%) participants, while 6 engaged in follow-up interviews. The results of the study included: participants preferred learning by "considering the big picture"; "setting own learning plans"; and "focusing on concrete examples." Several positive associations were found: learning on own with learning by reading, and setting own learning plans; small group with learning through discussion; large group with learning new things through hearing and with having learning plans set by others. The most preferred method was print-based material and the least preferred method was audio tape. The most suited method for content included video teleconferencing for counseling, political action, and transcultural issues; and video tape for physical assessment. Convenience, self-direction, and timing of learning were more important than delivery method or learning style. Preferred order of learning was reading, discussing, observing, doing, and reflecting. Recommended considerations when designing distance courses include a mix of delivery methods, specific content, outcomes, learner characteristics, and state of technology.

ANKLE TAPING DOES NOT IMPAIR PERFORMANCE IN JUMP OR BALANCE TESTS

Directory of Open Access Journals (Sweden)

Javier Abián-Vicén

2008-09-01

Full Text Available This study aimed to investigate the influence of prophylactic ankle taping on two balance tests (static and dynamic balance and one jump test, in the push off and the landing phase. Fifteen active young subjects (age: 21.0 ± 4.4 years without previous ankle injuries volunteered for the study. Each participant performed three tests in two different situations: with taping and without taping. The tests were a counter movement jump, static balance, and a dynamic posturography test. The tests and conditions were randomly performed. The path of the center of pressures was measured in the balance tests, and the vertical ground reaction forces were recorded during the push-off and landing phases of the counter movement jump. Ankle taping had no influence on balance performance or in the push off phase of the jump. However, the second peak vertical force value during the landing phase of the jump was 12% greater with ankle taping (0.66 BW, 95% CI -0.64 to 1.96. The use of prophylactic ankle taping had no influence on the balance or jump performance of healthy young subjects. In contrast, the taped ankle increased the second peak vertical force value, which could be related to a greater risk of injury produced by the accumulation of repeated impacts in sports where jumps are frequently performed

Study on influence of irradiation vulcanization to silicon rubber autohesive tape's properties

International Nuclear Information System (INIS)

Chen Chun; Tang Jian; Wu Ling; Han Yingchun; Zhou Hong; Mo Yan; Fu Haijun

2006-01-01

After using 60 Co γ-ray to irradiate vulcanization silicon rubber autohesive tape, the effect of absorbed dose to the autohesive tape's tensile strength, elongation at break, autohesion and breakdown voltage strength and dose rate's effect to the autohesive tape's properties were studied. The results indicate that autohesive tape's tensile strength increases and the elongation at break decreases with the increasing dose. Under the dose of 25 kGy, the tape's autohesion increases with the increasing dose. When the dose is up to 25 kGy, the tape's autohesion achieves to the maximum, and then decreases with the increasing dose. Absorbed dose has no effect to the tape's breakdown voltage strength, and the dose rate has no effect to the autohesive tape's properties. (authors)

CLEARANCE OF ARCHIVE TAPE VAULT (BUILDING 186)

CERN Multimedia

EP Division

1999-01-01

The archive tape vault is being cleared to make way for the LHC experiments silicon facility.Experiments were contacted in February to arrange for the extended storage or destruction of archived volumes. Any who have not yet done so are asked to contactR. Minchin/IT immediately.This is also an opportunity to clear unused tapes or cartridges from around the site and have them destroyed ecologically. Please contact ep.smi.helpdesk@cern.ch to arrange for collection.A.E. Ball/EP-SMI

A Guide to Making an Audio Tape.

Science.gov (United States)

Jobe, Holly; Cannon, Glenn

This brief introduction to the use of audiotape recorders in educational settings provides basic information on operational procedures and recording techniques for voice, music, dubbing, and pulsing. Audiotape editing and splicing are also explained. (RAO)

StirMark Benchmark: audio watermarking attacks based on lossy compression

Science.gov (United States)

Steinebach, Martin; Lang, Andreas; Dittmann, Jana

2002-04-01

StirMark Benchmark is a well-known evaluation tool for watermarking robustness. Additional attacks are added to it continuously. To enable application based evaluation, in our paper we address attacks against audio watermarks based on lossy audio compression algorithms to be included in the test environment. We discuss the effect of different lossy compression algorithms like MPEG-2 audio Layer 3, Ogg or VQF on a selection of audio test data. Our focus is on changes regarding the basic characteristics of the audio data like spectrum or average power and on removal of embedded watermarks. Furthermore we compare results of different watermarking algorithms and show that lossy compression is still a challenge for most of them. There are two strategies for adding evaluation of robustness against lossy compression to StirMark Benchmark: (a) use of existing free compression algorithms (b) implementation of a generic lossy compression simulation. We discuss how such a model can be implemented based on the results of our tests. This method is less complex, as no real psycho acoustic model has to be applied. Our model can be used for audio watermarking evaluation of numerous application fields. As an example, we describe its importance for e-commerce applications with watermarking security.

AKTIVITAS SEKUNDER AUDIO UNTUK MENJAGA KEWASPADAAN PENGEMUDI MOBIL INDONESIA

Directory of Open Access Journals (Sweden)

Iftikar Zahedi Sutalaksana

2013-03-01

Full Text Available Tingkat kecelakaan lalu lintas yang melibatkan mobil di Indonesia semakin mengkhawatirkan. Tingginya peran faktor manusia sebagai penyebab utama kejadian kecelakaan patut diperhatikan. Penurunan kewaspadaan saat mengemudi akibat kantuk atau kelelahan merupakan salah satu kondisi yang mendorong terjadinya kecelakaan. Tulisan ini memaparkan aplikasi audio response test sebagai aktivitas sekunder dalam mengemudikan mobil. Response test yang dimaksud merupakan seperangkat aplikasi pada dashboard mobil yang menuntut respon pengemudi setiap stimulus suara bekerja. Audio response test ini diusulkan sebagai pemantau tingkat kewaspadaan pengemudi selama berkendara. Kewaspadaan pengemudi merupakan kondisi selama berkendara yang terjaga, awas, dan mampu memproses semua stimulus dengan baik. Hasil studi ini menghasilkan suatu bentuk audio response test yang terintegrasi dengan sistem berkendara di dalam mobil. Sumber bunyi diperdengarkan dengan intensitas konstan antara 80-85 dB. Bunyi akan berhenti jika pengemudi memberikan respon atas stimulus suara tersebut. Response test ini dirancang untuk mampu memantau tingkat kewaspadaan pengemudi selama berkendara. Penerapannya diharapkan mampu membantu menekan tingkat kecelakaan lalu lintas di Indonesia. Kata kunci: mengemudi, aktivitas sekunder, audio, kewaspadaan, response test   Abstract   The level of traffic accidents involving cars in Indonesia increasingly alarming. The high role of the human factor as the main cause of accident noteworthy. Decreased alertness while driving due to sleepiness or fatigue is one of the conditions that led to the accident. This paper describes an audio application response test as a secondary activity of driving a car. Response test is a set of applications on the dashboard of a car that demands a response driver each stimulus voice work. Audio response was proposed as test monitors the driver's level of alertness while driving. Vigilance driver was driving conditions during

Audio Networking in the Music Industry

Directory of Open Access Journals (Sweden)

Glebs Kuzmics

2018-01-01

Full Text Available This paper surveys the rôle of computer networking technologies in the music industry. A comparison of their relevant technologies, their defining advantages and disadvantages; analyses and discussion of the situation in the market of network enabled audio products followed by a discussion of different devices are presented. The idea of replacing a proprietary solution with open-source and freeware software programs has been chosen as the fundamental concept of this research. The technologies covered include: native IEEE AVnu Alliance Audio Video Bridging (AVB, CobraNet®, Audinate Dante™ and Harman BLU Link.

Frequency Hopping Method for Audio Watermarking

Directory of Open Access Journals (Sweden)

A. Anastasijević

2012-11-01

Full Text Available This paper evaluates the degradation of audio content for a perceptible removable watermark. Two different approaches to embedding the watermark in the spectral domain were investigated. The frequencies for watermark embedding are chosen according to a pseudorandom sequence making the methods robust. Consequentially, the lower quality audio can be used for promotional purposes. For a fee, the watermark can be removed with a secret watermarking key. Objective and subjective testing was conducted in order to measure degradation level for the watermarked music samples and to examine residual distortion for different parameters of the watermarking algorithm and different music genres.

Four-quadrant flyback converter for direct audio power amplification

DEFF Research Database (Denmark)

Ljusev, Petar; Andersen, Michael Andreas E.

2005-01-01

This paper presents a bidirectional, four-quadrant flyback converter for use in direct audio power amplification. When compared to the standard Class-D switching audio power amplifier with a separate power supply, the proposed four-quadrant flyback converter provides simple solution with better...

Mirror-Touch and Ticker Tape Perceptions in Synesthesia

Directory of Open Access Journals (Sweden)

Charlotte Anne Chun

2013-11-01

Full Text Available A fundamental question in the field of synesthesia is whether it is associated with other cognitive phenomena. The current study examined synesthesia’s connections with phenomenal traits of mirror-touch and ticker tape experiences, as well as the representation of the three phenomena in the population, across gender and domain of work/study. Mirror-touch is the automatic, involuntary experience of tactile sensation on one's own body when others are being touched. For example, seeing another person’s arm being stroked can evoke physical touch sensation on one’s own arm. Ticker tape is the automatic visualization of spoken words or thoughts, such as a teleprompter. For example, when spoken to, a ticker taper might see mentally the spoken words displayed in front of his face or as coming out of the speaker’s mouth. To explore synesthesia’s associations with these phenomena, a diverse group (n=3,743 was systematically recruited from eight universities and one public museum in France to complete an online screening. Of the 1,017 eligible respondents, synesthetes (across all subtypes reported higher rates of mirror-touch and ticker tape than non-synesthetes, suggesting that synesthesia is associated with these phenomenal traits. However effect size was small and we could not rule out that response bias influenced these associations. Mirror-touch and ticker tape were independent. No differences were found across gender or domain of work and study in prevalence of synesthesia, mirror-touch or ticker tape. The prevalence of ticker tape, unknown so far, was estimated at about 7%, an intermediate rate between estimates of grapheme-color (2 to 4% and sequence-space synesthesia (9 to 14%. Within synesthesia, grapheme-personification, also called ordinal-linguistic personification was the most common subtype and was estimated around 12%. Co-occurences of the different types of synesthesia were higher than chance, though at the level of small effect

Audio Technology and Mobile Human Computer Interaction

DEFF Research Database (Denmark)

Chamberlain, Alan; Bødker, Mads; Hazzard, Adrian

2017-01-01

Audio-based mobile technology is opening up a range of new interactive possibilities. This paper brings some of those possibilities to light by offering a range of perspectives based in this area. It is not only the technical systems that are developing, but novel approaches to the design...... and understanding of audio-based mobile systems are evolving to offer new perspectives on interaction and design and support such systems to be applied in areas, such as the humanities....

String and Sticky Tape Experiments.

Science.gov (United States)

Edge, R. D., Ed.

1979-01-01

Explains how to demonstrate the fundamentals of one dimensional kinematics such as Newton's third law of motion, and collision between bodies, using simple materials of marbles, strings, sticky tape, drinking straws, and rubber bands. (GA)

Mobile video-to-audio transducer and motion detection for sensory substitution

Directory of Open Access Journals (Sweden)

Maxime eAmbard

2015-10-01

Full Text Available Visuo-auditory sensory substitution systems are augmented reality devices that translate a video stream into an audio stream in order to help the blind in daily tasks requiring visuo-spatial information. In this work, we present both a new mobile device and a transcoding method specifically designed to sonify moving objects. Frame differencing is used to extract spatial features from the video stream and two-dimensional spatial information is converted into audio cues using pitch, interaural time difference and interaural level difference. Using numerical methods, we attempt to reconstruct visuo-spatial information based on audio signals generated from various video stimuli. We show that despite a contrasted visual background and a highly lossy encoding method, the information in the audio signal is sufficient to allow object localization, object trajectory evaluation, object approach detection, and spatial separation of multiple objects. We also show that this type of audio signal can be interpreted by human users by asking ten subjects to discriminate trajectories based on generated audio signals.

Moore's law realities for recording systems and memory storage components: HDD, tape, NAND, and optical

Science.gov (United States)

Fontana, Robert E.; Decad, Gary M.

2018-05-01

This paper describes trends in the storage technologies associated with Linear Tape Open (LTO) Tape cartridges, hard disk drives (HDD), and NAND Flash based storage devices including solid-state drives (SSD). This technology discussion centers on the relationship between cost/bit and bit density and, specifically on how the Moore's Law perception that areal density doubling and cost/bit halving every two years is no longer being achieved for storage based components. This observation and a Moore's Law Discussion are demonstrated with data from 9-year storage technology trends, assembled from publically available industry reporting sources.

On the weld strength of in situ tape placed reinforcements on weave reinforced structures

NARCIS (Netherlands)

Grouve, Wouter Johannes Bernardus; Warnet, Laurent; Rietman, Bert; Akkerman, Remko

2012-01-01

Unidirectionally reinforced thermoplastic tapes were welded onto woven fabric reinforced laminates using a laser assisted tape placement process. A mandrel peel setup was used to quantify the interfacial fracture toughness between the tape and the laminate as a measure for weld strength. The tape

VHS-tape system for general purpose computer. For next generation mass storage system

International Nuclear Information System (INIS)

Ukai, K.; Takano, M.; Shinohara, M.; Niki, K.; Suzuki, Y.; Hamada, T.; Ogawa, M.

1994-07-01

Mass storage is one of the key technology of next generation computer system. A huge amount of data is produced on a field of particle and nuclear physics. These data are raw data of experiments, analysis data, Monte Carlo simulations data, etc. We search a storage device for these data at the point of view of capacity, price, size, transfer speed, etc. We have selected a VHS-tape (12.7 mm-tape, helical scan) from many storage devices. Characteristics of the VHS-tape are as follows; capacity of 14.5 GB, size of 460 cm 3 , price of 1,000 yen (S-VHS tape for video use), and 1.996 MB/sec transfer speed at a sustained mode. Last year, we succeeded to operate the VHS-tape system on a workstation as a I/O device with read/write speed of 1.5 MB/sec. We have tested a VHS-tape system by connecting to the channel of the general purpose computer (Fujitsu M-780/10S) in our institute. We obtained a read and write speeds of 1.07 MB/sec and 1.72 MB/sec by FORTRAN test programs, respectively. Read speeds of an open reel tape and a 3480 type cassete tape by the same test programs are 1.13 MB/sec and 2.54 MB/sec, respectively. Speeds of write operation are 1.09 MB/sec and 2.54 MB/sec for the open reel and 3480 cassete tape, respectively. A start motion of the VHS-tape for read/write operations needs about 60 seconds. (author)

Torsional Properties of TiNi Shape Memory Alloy Tape for Rotary Actuator

Science.gov (United States)

Takeda, K.; Tobushi, H.; Mitsui, K.; Nishimura, Y.; Miyamoto, K.

2012-12-01

In order to develop novel shape memory actuators, the torsional deformation of a shape memory alloy (SMA) tape and the actuator models driven by the tape were investigated. The results obtained can be summarized as follows. In the SMA tape subjected to torsion, the martensitic transformation appears along both edges of the tape due to elongation of these elements and grows to the central part. The fatigue life in both the pulsating torsion and alternating torsion is expressed by the unified relationship of the dissipated work in each cycle. Based on an opening and closing door model and a solar-powered active blind model, the two-way rotary driving actuator with a small and simple mechanism can be developed by using torsion of the SMA tape.

Unsupervised topic modelling on South African parliament audio data

CSIR Research Space (South Africa)

Kleynhans, N

2014-11-01

Full Text Available Using a speech recognition system to convert spoken audio to text can enable the structuring of large collections of spoken audio data. A convenient means to summarise or cluster spoken data is to identify the topic under discussion. There are many...

Classifying laughter and speech using audio-visual feature prediction

NARCIS (Netherlands)

Petridis, Stavros; Asghar, Ali; Pantic, Maja

2010-01-01

In this study, a system that discriminates laughter from speech by modelling the relationship between audio and visual features is presented. The underlying assumption is that this relationship is different between speech and laughter. Neural networks are trained which learn the audio-to-visual and

Does Kinesiology tape counter exercise-related impairments of balance in the elderly?

Science.gov (United States)

Hosp, Simona; Csapo, Robert; Heinrich, Dieter; Hasler, Michael; Nachbauer, Werner

2018-05-01

Maintaining balance is an essential requirement for the performance of daily tasks and sporting activities, particularly in older adults to prevent falls and associated injuries. Kinesiology tape has gained great popularity in sports and is frequently used as a tool for performance enhancement. However, there is little research investigating its influence on balance. The purpose of this study was to evaluate the effect of Kinesiology tape on dynamic balance, postural stability and knee proprioception after physical activity in healthy, older adults. Twelve physically active, healthy men aged 63-77 years performed the test on two separate days, with and without Kinesiology tape at the knee joint (prospective intervention with cross-over design). Dynamic balance during an obstacle-crossing task, postural stability in a single-leg stance test, and knee joint position sense as a measure of proprioception were examined before and after 30 min of downhill walking on a treadmill. The influences of taping condition and physical activity on all parameters were statistically tested using factorial ANOVAs. Factorial ANOVA revealed significant time × taping condition interaction effects on all performance parameters (p postural stability and knee proprioception differed between the two taping conditions. The deterioration of performance was always greater when no tape was used. This study demonstrated that physical exercise significantly deteriorated dynamic balance, postural stability and knee proprioception in older men. These effects can be attenuated through the usage of Kinesiology tape. By preventing exercise-related impairments of balance, Kinesiology tape might help reduce the risk of sports-associated falls and associated injuries. Copyright © 2018 Elsevier B.V. All rights reserved.

Sistema de adquisición y procesamiento de audio

OpenAIRE

Pérez Segurado, Rubén

2015-01-01

El objetivo de este proyecto es el diseño y la implementación de una plataforma para un sistema de procesamiento de audio. El sistema recibirá una señal de audio analógica desde una fuente de audio, permitirá realizar un tratamiento digital de dicha señal y generará una señal procesada que se enviará a unos altavoces externos. Para la realización del sistema de procesamiento se empleará: - Un dispositivo FPGA de Lattice, modelo MachX02-7000-HE, en la cual estarán todas la...

Thermal Edge-Effects Model for Automated Tape Placement of Thermoplastic Composites

Science.gov (United States)

Costen, Robert C.

2000-01-01

Two-dimensional thermal models for automated tape placement (ATP) of thermoplastic composites neglect the diffusive heat transport that occurs between the newly placed tape and the cool substrate beside it. Such lateral transport can cool the tape edges prematurely and weaken the bond. The three-dimensional, steady state, thermal transport equation is solved by the Green's function method for a tape of finite width being placed on an infinitely wide substrate. The isotherm for the glass transition temperature on the weld interface is used to determine the distance inward from the tape edge that is prematurely cooled, called the cooling incursion Delta a. For the Langley ATP robot, Delta a = 0.4 mm for a unidirectional lay-up of PEEK/carbon fiber composite, and Delta a = 1.2 mm for an isotropic lay-up. A formula for Delta a is developed and applied to a wide range of operating conditions. A surprise finding is that Delta a need not decrease as the Peclet number Pe becomes very large, where Pe is the dimensionless ratio of inertial to diffusive heat transport. Conformable rollers that increase the consolidation length would also increase Delta a, unless other changes are made, such as proportionally increasing the material speed. To compensate for premature edge cooling, the thermal input could be extended past the tape edges by the amount Delta a. This method should help achieve uniform weld strength and crystallinity across the width of the tape.

Analytical Features: A Knowledge-Based Approach to Audio Feature Generation

Directory of Open Access Journals (Sweden)

Pachet François

2009-01-01

Full Text Available We present a feature generation system designed to create audio features for supervised classification tasks. The main contribution to feature generation studies is the notion of analytical features (AFs, a construct designed to support the representation of knowledge about audio signal processing. We describe the most important aspects of AFs, in particular their dimensional type system, on which are based pattern-based random generators, heuristics, and rewriting rules. We show how AFs generalize or improve previous approaches used in feature generation. We report on several projects using AFs for difficult audio classification tasks, demonstrating their advantage over standard audio features. More generally, we propose analytical features as a paradigm to bring raw signals into the world of symbolic computation.

Audible Aliasing Distortion in Digital Audio Synthesis

Directory of Open Access Journals (Sweden)

J. Schimmel

2012-04-01

Full Text Available This paper deals with aliasing distortion in digital audio signal synthesis of classic periodic waveforms with infinite Fourier series, for electronic musical instruments. When these waveforms are generated in the digital domain then the aliasing appears due to its unlimited bandwidth. There are several techniques for the synthesis of these signals that have been designed to avoid or reduce the aliasing distortion. However, these techniques have high computing demands. One can say that today's computers have enough computing power to use these methods. However, we have to realize that today’s computer-aided music production requires tens of multi-timbre voices generated simultaneously by software synthesizers and the most of the computing power must be reserved for hard-disc recording subsystem and real-time audio processing of many audio channels with a lot of audio effects. Trivially generated classic analog synthesizer waveforms are therefore still effective for sound synthesis. We cannot avoid the aliasing distortion but spectral components produced by the aliasing can be masked with harmonic components and thus made inaudible if sufficient oversampling ratio is used. This paper deals with the assessment of audible aliasing distortion with the help of a psychoacoustic model of simultaneous masking and compares the computing demands of trivial generation using oversampling with those of other methods.

A software package to process an INIS magnetic tape on the VAX computer

International Nuclear Information System (INIS)

Omar, A.A.; Mohamed, F.A.

1991-01-01

This paper presents a software package whose function is to process the magnetic tapes distributed by the Atomic Energy Agency, on the VAX computers. These tapes contain abstracts of papers in the different branches of nuclear field and is supplied from the international Nuclear Information system (INIS). Two goals are aimed from this paper. First it gives a procedure to process any foreign magnetic tape on the VAX computers. Second, it solves the problem of reading the INIS tapes on a non IBM computer and thus allowing the specialists to gain from the large amount of information contained in these tapes. 11 fig

ENERGY STAR Certified Audio Video

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 3.0 ENERGY STAR Program Requirements for Audio Video Equipment that are effective as of...

Tape cast isotropic, fine-grained tungsten for thermo-cyclic loading applications

Energy Technology Data Exchange (ETDEWEB)

Sommerer, Mathias, E-mail: Mathias.Sommerer@tum.de [Lehrstuhl für Werkstoffkunde und Werkstoffmechanik, Technische Universität München, Boltzmannstr. 15, 85748 Garching (Germany); Li, Muyuan [Max-Planck-Institut für Plasma Physik, Boltzmannstraße 2, 85748 Garching (Germany); Werner, Ewald [Lehrstuhl für Werkstoffkunde und Werkstoffmechanik, Technische Universität München, Boltzmannstr. 15, 85748 Garching (Germany); Dewitz, Hubertus von; Walter, Steffen; Lampenscherf, Stefan [Siemens AG, Corporate Technology, Otto-Hahn-Ring 6, 81730 München (Germany); Arnold, Thomas [Siemens Healthcare GmbH, Henkestr. 127, 91052 Erlangen (Germany)

2016-04-15

Highlights: • The tape casting process for tungsten is described. • A set-up of a HHF test facility for standing anodes is presented. • The thermo-cyclic behavior of tape cast tungsten and a reference is investigated. • The evolution of crack patterns is described in dependency of HHF-loadings. • The surface roughness of X-ray anodes is related to the microstructural evolution. - Abstract: This paper introduces tape casting as a new route for the production of isotropic and fine-grained tungsten components. Microstructural and thermal properties of tape cast tungsten samples are determined. Thermal shock behavior according to the thermo-cyclic loading of standing X-ray anodes is investigated and compared to the behavior of a rolled tungsten grade. The development of surface roughness during the thermal shock loading is discussed in relation to the development of the grain structure and crack pattern. The fine-grained and stable microstructure of the tape cast material exhibits less roughening under such test conditions.

TECHNICAL NOTE: Portable audio electronics for impedance-based measurements in microfluidics

Science.gov (United States)

Wood, Paul; Sinton, David

2010-08-01

We demonstrate the use of audio electronics-based signals to perform on-chip electrochemical measurements. Cell phones and portable music players are examples of consumer electronics that are easily operated and are ubiquitous worldwide. Audio output (play) and input (record) signals are voltage based and contain frequency and amplitude information. A cell phone, laptop soundcard and two compact audio players are compared with respect to frequency response; the laptop soundcard provides the most uniform frequency response, while the cell phone performance is found to be insufficient. The audio signals in the common portable music players and laptop soundcard operate in the range of 20 Hz to 20 kHz and are found to be applicable, as voltage input and output signals, to impedance-based electrochemical measurements in microfluidic systems. Validated impedance-based measurements of concentration (0.1-50 mM), flow rate (2-120 µL min-1) and particle detection (32 µm diameter) are demonstrated. The prevailing, lossless, wave audio file format is found to be suitable for data transmission to and from external sources, such as a centralized lab, and the cost of all hardware (in addition to audio devices) is ~10 USD. The utility demonstrated here, in combination with the ubiquitous nature of portable audio electronics, presents new opportunities for impedance-based measurements in portable microfluidic systems.

Design of batch audio/video conversion platform based on JavaEE

Science.gov (United States)

Cui, Yansong; Jiang, Lianpin

2018-03-01

With the rapid development of digital publishing industry, the direction of audio / video publishing shows the diversity of coding standards for audio and video files, massive data and other significant features. Faced with massive and diverse data, how to quickly and efficiently convert to a unified code format has brought great difficulties to the digital publishing organization. In view of this demand and present situation in this paper, basing on the development architecture of Sptring+SpringMVC+Mybatis, and combined with the open source FFMPEG format conversion tool, a distributed online audio and video format conversion platform with a B/S structure is proposed. Based on the Java language, the key technologies and strategies designed in the design of platform architecture are analyzed emphatically in this paper, designing and developing a efficient audio and video format conversion system, which is composed of “Front display system”, "core scheduling server " and " conversion server ". The test results show that, compared with the ordinary audio and video conversion scheme, the use of batch audio and video format conversion platform can effectively improve the conversion efficiency of audio and video files, and reduce the complexity of the work. Practice has proved that the key technology discussed in this paper can be applied in the field of large batch file processing, and has certain practical application value.

Class-D audio amplifiers with negative feedback

OpenAIRE

Cox, Stephen M.; Candy, B. H.

2006-01-01

There are many different designs for audio amplifiers. Class-D, or switching, amplifiers generate their output signal in the form of a high-frequency square wave of variable duty cycle (ratio of on time to off time). The square-wave nature of the output allows a particularly efficient output stage, with minimal losses. The output is ultimately filtered to remove components of the spectrum above the audio range. Mathematical models are derived here for a variety of related class-D amplifier de...

A second-order class-D audio amplifier

OpenAIRE

Cox, Stephen M.; Tan, M.T.; Yu, J.

2011-01-01

Class-D audio amplifiers are particularly efficient, and this efficiency has led to their ubiquity in a wide range of modern electronic appliances. Their output takes the form of a high-frequency square wave whose duty cycle (ratio of on-time to off-time) is modulated at low frequency according to the audio signal. A mathematical model is developed here for a second-order class-D amplifier design (i.e., containing one second-order integrator) with negative feedback. We derive exact expression...

Documentary management of the sport audio-visual information in the generalist televisions

OpenAIRE

Jorge Caldera Serrano; Felipe Alonso

2007-01-01

The management of the sport audio-visual documentation of the Information Systems of the state, zonal and local chains is analyzed within the framework. For it it is made makes a route by the documentary chain that makes the sport audio-visual information with the purpose of being analyzing each one of the parameters, showing therefore a series of recommendations and norms for the preparation of the sport audio-visual registry. Evidently the audio-visual sport documentation difference i...

Multi Carrier Modulation Audio Power Amplifier with Programmable Logic

DEFF Research Database (Denmark)

Christiansen, Theis; Andersen, Toke Meyer; Knott, Arnold

2009-01-01

While switch-mode audio power amplifiers allow compact implementations and high output power levels due to their high power efficiency, they are very well known for creating electromagnetic interference (EMI) with other electronic equipment. To lower the EMI of switch-mode (class D) audio power a...

Advances in audio watermarking based on singular value decomposition

CERN Document Server

Dhar, Pranab Kumar

2015-01-01

This book introduces audio watermarking methods for copyright protection, which has drawn extensive attention for securing digital data from unauthorized copying. The book is divided into two parts. First, an audio watermarking method in discrete wavelet transform (DWT) and discrete cosine transform (DCT) domains using singular value decomposition (SVD) and quantization is introduced. This method is robust against various attacks and provides good imperceptible watermarked sounds. Then, an audio watermarking method in fast Fourier transform (FFT) domain using SVD and Cartesian-polar transformation (CPT) is presented. This method has high imperceptibility and high data payload and it provides good robustness against various attacks. These techniques allow media owners to protect copyright and to show authenticity and ownership of their material in a variety of applications.   ·         Features new methods of audio watermarking for copyright protection and ownership protection ·         Outl...

Perancangan Sistem Audio Mobil Berbasiskan Sistem Pakar dan Web

Directory of Open Access Journals (Sweden)

Djunaidi Santoso

2011-12-01

Full Text Available Designing car audio that fits user’s needs is a fun activity. However, the design often consumes more time and costly since it should be consulted to the experts several times. For easy access to information in designing a car audio system as well as error prevention, an car audio system based on expert system and web is designed for those who do not have sufficient time and expense to consult directly to experts. This system consists of tutorial modules designed using the HyperText Preprocessor (PHP and MySQL as database. This car audio system design is evaluated uses black box testing method which focuses on the functional needs of the application. Tests are performed by providing inputs and produce outputs corresponding to the function of each module. The test results prove the correspondence between input and output, which means that the program meet the initial goals of the design. 

Are the same tapes really the same? Ultrasound study of laser-cut and mechanically cut TVT-O post-operative behavior.

Science.gov (United States)

Rusavy, Zdenek; Masata, Jaromir; Svabik, Kamil; Hubka, Petr; Zvara, Karel; Martan, Alois

2017-11-25

TVT-O production has been modified to laser cutting from mechanical cutting. We compared the behavior of laser and mechanically cut tension-free vaginal tape-obturator (TVT-O) using ultrasound at various time points after surgery. This is a retrospective analysis of clinical and ultrasound data from two previously reported randomized controlled trials with TVT-O. Behavior of mechanically cut TVT-O implanted in January 2007 to November 2009 and laser-cut TVT-O implanted in May 2010 to May 2012 was assessed by ultrasound at day 1, the 2nd week, the 3rd month, and the 1st and 2nd years post-operatively. Bladder neck and tape margins positions were described by coordinates in the orthogonal system calculated from polar coordinates. Tape mobility was measured as a change in the upper and lower tape margin position from rest to maximal Valsalva. Comparison of 2-year subjective and objective surgery outcomes was also performed. In total, 68 mechanically cut and 50 laser-cut TVT-Os were implanted. Follow-up data were available from 49 and 45 women respectively. No differences in any baseline characteristics or bladder neck mobility were observed. Significantly lower tape mobility was observed on day 1 and week 2 after mechanically cut TVT-O, although subsequent mobility was comparable to laser-cut TVT-O. The subjective and objective surgery outcomes were comparable. Although without clinical significance, early postoperative behavior of the mechanically cut and laser-cut TVT-O tapes differs. The less stiff, mechanically-cut TVT-O loosens within 2 weeks of implantation, whereas the stiffer, laser-cut TVT-O keeps its tension.

Modelling of Tape Casting for Ceramic Applications

DEFF Research Database (Denmark)

Jabbari, Masoud

was increased by improving the steady state model with a quasi-steady state analytical model. In order to control the most important process parameter, tape thickness, the two-doctor blade configuration was also modeled analytically. The model was developed to control the tape thickness based on the machine...... for magnetic refrigeration applications. Numerical models were developed to track the migration of the particles inside the ceramic slurry. The results showed the presence of some areas inside the ceramic in which the concentration of the particles is higher compared to other parts, creating the resulting...

Transaction aware tape-infrastructure monitoring

International Nuclear Information System (INIS)

Nikolaidis, Fotios; Kruse, Daniele Francesco

2014-01-01

Administrating a large scale, multi protocol, hierarchical tape infrastructure like the CERN Advanced STORage manager (CASTOR)[2], which stores now 100 PB (with an increasing step of 25 PB per year), requires an adequate monitoring system for quick spotting of malfunctions, easier debugging and on demand report generation. The main challenges for such system are: to cope with CASTOR's log format diversity and its information scattered among several log files, the need for long term information archival, the strict reliability requirements and the group based GUI visualization. For this purpose, we have designed, developed and deployed a centralized system consisting of four independent layers: the Log Transfer layer for collecting log lines from all tape servers to a single aggregation server, the Data Mining layer for combining log data into transaction context, the Storage layer for archiving the resulting transactions and finally the Web UI layer for accessing the information. Having flexibility, extensibility and maintainability in mind, each layer is designed to work as a message broker for the next layer, providing a clean and generic interface while ensuring consistency, redundancy and ultimately fault tolerance. This system unifies information previously dispersed over several monitoring tools into a single user interface, using Splunk, which also allows us to provide information visualization based on access control lists (ACL). Since its deployment, it has been successfully used by CASTOR tape operators for quick overview of transactions, performance evaluation, malfunction detection and from managers for report generation.

A Psychoacoustic-Based Multiple Audio Object Coding Approach via Intra-Object Sparsity

Directory of Open Access Journals (Sweden)

Maoshen Jia

2017-12-01

Full Text Available Rendering spatial sound scenes via audio objects has become popular in recent years, since it can provide more flexibility for different auditory scenarios, such as 3D movies, spatial audio communication and virtual classrooms. To facilitate high-quality bitrate-efficient distribution for spatial audio objects, an encoding scheme based on intra-object sparsity (approximate k-sparsity of the audio object itself is proposed in this paper. The statistical analysis is presented to validate the notion that the audio object has a stronger sparseness in the Modified Discrete Cosine Transform (MDCT domain than in the Short Time Fourier Transform (STFT domain. By exploiting intra-object sparsity in the MDCT domain, multiple simultaneously occurring audio objects are compressed into a mono downmix signal with side information. To ensure a balanced perception quality of audio objects, a Psychoacoustic-based time-frequency instants sorting algorithm and an energy equalized Number of Preserved Time-Frequency Bins (NPTF allocation strategy are proposed, which are employed in the underlying compression framework. The downmix signal can be further encoded via Scalar Quantized Vector Huffman Coding (SQVH technique at a desirable bitrate, and the side information is transmitted in a lossless manner. Both objective and subjective evaluations show that the proposed encoding scheme outperforms the Sparsity Analysis (SPA approach and Spatial Audio Object Coding (SAOC in cases where eight objects were jointly encoded.

An introduction to audio content analysis applications in signal processing and music informatics

CERN Document Server

Lerch, Alexander

2012-01-01

"With the proliferation of digital audio distribution over digital media, audio content analysis is fast becoming a requirement for designers of intelligent signal-adaptive audio processing systems. Written by a well-known expert in the field, this book provides quick access to different analysis algorithms and allows comparison between different approaches to the same task, making it useful for newcomers to audio signal processing and industry experts alike. A review of relevant fundamentals in audio signal processing, psychoacoustics, and music theory, as well as downloadable MATLAB files are also included"--

BAT: An open-source, web-based audio events annotation tool

OpenAIRE

Blai Meléndez-Catalan, Emilio Molina, Emilia Gómez

2017-01-01

In this paper we present BAT (BMAT Annotation Tool), an open-source, web-based tool for the manual annotation of events in audio recordings developed at BMAT (Barcelona Music and Audio Technologies). The main feature of the tool is that it provides an easy way to annotate the salience of simultaneous sound sources. Additionally, it allows to define multiple ontologies to adapt to multiple tasks and offers the possibility to cross-annotate audio data. Moreover, it is easy to install and deploy...

Modelling and measurement of ac loss in BSCCO/Ag-tape windings

International Nuclear Information System (INIS)

Oomen, M P; Nanke, R; Leghissa, M

2003-01-01

High-temperature superconducting (HTS) transformers promise decreased weight and volume and higher efficiency. A 1 MVA HTS railway transformer was built and tested at Siemens AG. This paper deals with the prediction of ac loss in the BSCCO/Ag-tape windings. In a railway transformer the tape carries ac current in alternating field, the temperature differs from 77 K, tapes are stacked or cabled and overcurrents and higher harmonics occur. In ac-loss literature these issues are treated separately, if at all. We have developed a model that predicts the ac loss in sets of BSCCO/Ag-tape coils, and deals with the above-mentioned issues. The effect of higher harmonics on the loss in HTS tapes is considered for the first time. The paper gives a complete overview of the model equations and required input parameters. The model is validated over a wide range of the input parameters, using the measured critical current and ac loss of single tapes, single coils and sets of coils in the 1 MVA transformer. An accuracy of around 25% is achieved in all relevant cases. Presently the model is developed further, in order to describe other HTS materials and other types of applications

On the Use of Memory Models in Audio Features

DEFF Research Database (Denmark)

Jensen, Karl Kristoffer

2011-01-01

Audio feature estimation is potentially improved by including higher- level models. One such model is the Short Term Memory (STM) model. A new paradigm of audio feature estimation is obtained by adding the influence of notes in the STM. These notes are identified when the perceptual spectral flux...

Audio Teleconferencing: Low Cost Technology for External Studies Networking.

Science.gov (United States)

Robertson, Bill

1987-01-01

This discussion of the benefits of audio teleconferencing for distance education programs and for business and government applications focuses on the recent experience of Canadian educational users. Four successful operating models and their costs are reviewed, and it is concluded that audio teleconferencing is cost efficient and educationally…

Automatic Organisation and Quality Analysis of User-Generated Content with Audio Fingerprinting

OpenAIRE

Cavaco, Sofia; Magalhaes, Joao; Mordido, Gonçalo

2018-01-01

The increase of the quantity of user-generated content experienced in social media has boosted the importance of analysing and organising the content by its quality. Here, we propose a method that uses audio fingerprinting to organise and infer the quality of user-generated audio content. The proposed method detects the overlapping segments between different audio clips to organise and cluster the data according to events, and to infer the audio quality of the samples. A test setup with conce...

Real-Time Audio Processing on the T-CREST Multicore Platform

DEFF Research Database (Denmark)

Ausin, Daniel Sanz; Pezzarossa, Luca; Schoeberl, Martin

2017-01-01

of the audio signal. This paper presents a real-time multicore audio processing system based on the T-CREST platform. T-CREST is a time-predictable multicore processor for real-time embedded systems. Multiple audio effect tasks have been implemented, which can be connected together in different configurations...... forming sequential and parallel effect chains, and using a network-onchip for intercommunication between processors. The evaluation of the system shows that real-time processing of multiple effect configurations is possible, and that the estimation and control of latency ensures real-time behavior.......Multicore platforms are nowadays widely used for audio processing applications, due to the improvement of computational power that they provide. However, some of these systems are not optimized for temporally constrained environments, which often leads to an undesired increase in the latency...

Electrical and mechanical properties of Bi-2223/Ag/barrier/Ag composite tapes

International Nuclear Information System (INIS)

Kovac, P.; Husek, I.; Goemoery, F.; Oduleye, O.O.; Alford, N.McN.; Pachla, W.; Diduszko, R.

2000-01-01

Bi-2223/Ag/barrier/Ag single-core tapes with various oxide barrier materials (BaZrO 3 , SrCO 3 , ZrO 2 and Al 2 O 3 ) have been prepared by PIT. The I-V curves and ac susceptibility measurements have been performed for tapes with identical heat treatment history. Young's moduli of these tape samples have been evaluated by three-point bending and the structure of barrier powders and BSCCO cores was analysed by SEM and XRD, respectively. It was found that the shape of I-V curves, the current transfer lengths and the mechanical properties of tapes are all affected by the oxide barrier type and the barrier thickness, as well as by its porosity and uniformity. This is because the oxide barrier controls the oxygen diffusion during the tape heat treatment and simultaneously the HTS phase formation kinetics, its purity and content within the superconducting core. On the base of the results obtained for single-core tapes, two kinds of multifilamentary composite were made and tested. (author)

Tape measure to aid prescription in paediatric resuscitation.

OpenAIRE

Hughes, G; Spoudeas, H; Kovar, I Z; Millington, H T

1990-01-01

A tape measure, based on 50th centile weight for height and designed to permit easy drug dosage calculation, endotracheal tube size and DC cardioversion current dosages in childrens' emergencies, was tested for reliability by medical and nursing staff with varying paediatric experience. We found that the tape measure gave a reproducible estimate of weight and suggest that its use would facilitate decision making by inexperienced medical and nursing staff in paediatric resuscitation when there...

Research on resistance characteristics of YBCO tape under short-time DC large current impact

Science.gov (United States)

Zhang, Zhifeng; Yang, Jiabin; Qiu, Qingquan; Zhang, Guomin; Lin, Liangzhen

2017-06-01

Research of the resistance characteristics of YBCO tape under short-time DC large current impact is the foundation of the developing DC superconducting fault current limiter (SFCL) for voltage source converter-based high voltage direct current system (VSC-HVDC), which is one of the valid approaches to solve the problems of renewable energy integration. SFCL can limit DC short-circuit and enhance the interrupting capabilities of DC circuit breakers. In this paper, under short-time DC large current impacts, the resistance features of naked tape of YBCO tape are studied to find the resistance - temperature change rule and the maximum impact current. The influence of insulation for the resistance - temperature characteristics of YBCO tape is studied by comparison tests with naked tape and insulating tape in 77 K. The influence of operating temperature on the tape is also studied under subcooled liquid nitrogen condition. For the current impact security of YBCO tape, the critical current degradation and top temperature are analyzed and worked as judgment standards. The testing results is helpful for in developing SFCL in VSC-HVDC.

Multilayer tape cast SOFC – Effect of anode sintering temperature

DEFF Research Database (Denmark)

Hauch, Anne; Birkl, Christoph; Brodersen, Karen

2012-01-01

Multilayer tape casting (MTC) is considered a promising, cost-efficient, up-scalable shaping process for production of planar anode supported solid oxide fuel cells (SOFC). Multilayer tape casting of the three layers comprising the half cell (anode support/active anode/electrolyte) can potentially...

Haptic and Audio-visual Stimuli: Enhancing Experiences and Interaction

NARCIS (Netherlands)

Nijholt, Antinus; Dijk, Esko O.; Lemmens, Paul M.C.; Luitjens, S.B.

2010-01-01

The intention of the symposium on Haptic and Audio-visual stimuli at the EuroHaptics 2010 conference is to deepen the understanding of the effect of combined Haptic and Audio-visual stimuli. The knowledge gained will be used to enhance experiences and interactions in daily life. To this end, a

The Effect of Audio and Animation in Multimedia Instruction

Science.gov (United States)

Koroghlanian, Carol; Klein, James D.

2004-01-01

This study investigated the effects of audio, animation, and spatial ability in a multimedia computer program for high school biology. Participants completed a multimedia program that presented content by way of text or audio with lean text. In addition, several instructional sequences were presented either with static illustrations or animations.…

Selected Audio-Visual Materials for Consumer Education. [New Version.

Science.gov (United States)

Johnston, William L.

Ninety-two films, filmstrips, multi-media kits, slides, and audio cassettes, produced between 1964 and 1974, are listed in this selective annotated bibliography on consumer education. The major portion of the bibliography is devoted to films and filmstrips. The main topics of the audio-visual materials include purchasing, advertising, money…

Audio-visual temporal recalibration can be constrained by content cues regardless of spatial overlap

Directory of Open Access Journals (Sweden)

Warrick eRoseboom

2013-04-01

Full Text Available It has now been well established that the point of subjective synchrony for audio and visual events can be shifted following exposure to asynchronous audio-visual presentations, an effect often referred to as temporal recalibration. Recently it was further demonstrated that it is possible to concurrently maintain two such recalibrated, and opposing, estimates of audio-visual temporal synchrony. However, it remains unclear precisely what defines a given audio-visual pair such that it is possible to maintain a temporal relationship distinct from other pairs. It has been suggested that spatial separation of the different audio-visual pairs is necessary to achieve multiple distinct audio-visual synchrony estimates. Here we investigated if this was necessarily true. Specifically, we examined whether it is possible to obtain two distinct temporal recalibrations for stimuli that differed only in featural content. Using both complex (audio visual speech; Experiment 1 and simple stimuli (high and low pitch audio matched with either vertically or horizontally oriented Gabors; Experiment 2 we found concurrent, and opposite, recalibrations despite there being no spatial difference in presentation location at any point throughout the experiment. This result supports the notion that the content of an audio-visual pair can be used to constrain distinct audio-visual synchrony estimates regardless of spatial overlap.

Living with psoriasis: An insight into factors associated with quality of life

Directory of Open Access Journals (Sweden)

Milutinović Jelena D.

2017-01-01

Full Text Available Background: Patients with psoriasis show physical discomfort, stigma, loss of productivity, low self-esteem, and are often limited in everyday activities, social contacts and at work. Objective: The aim of this study was to reveal factors which may influence quality of life in patients with psoriasis, using qualitative research methodology. Methods: This study used grounded theory approach, which consist mainly of conducting interviews and collecting observational data. The subjects were patients who suffer from psoriasis. Results: After making interviews which were audio taped, they were transcribed and analysed in detail, revealing semantic units and combining them in seven categories and themes. Advertizing perfect skin through media, promoting it as a social ideal, ignorance and lack of understanding by others and unacceptance of own condition are main factors that significantly affect quality of life in patients suffering from psoriasis. Conclusion: Individual approach to every patient is necessary prerequisite for adequate treatment and building realistic expectation sac cording to severity of the disease. Relatively small changes in lifestyle and attitude towards the disease may significantly improve quality of life.

Enhanced audio-visual interactions in the auditory cortex of elderly cochlear-implant users.

Science.gov (United States)

Schierholz, Irina; Finke, Mareike; Schulte, Svenja; Hauthal, Nadine; Kantzke, Christoph; Rach, Stefan; Büchner, Andreas; Dengler, Reinhard; Sandmann, Pascale

2015-10-01

Auditory deprivation and the restoration of hearing via a cochlear implant (CI) can induce functional plasticity in auditory cortical areas. How these plastic changes affect the ability to integrate combined auditory (A) and visual (V) information is not yet well understood. In the present study, we used electroencephalography (EEG) to examine whether age, temporary deafness and altered sensory experience with a CI can affect audio-visual (AV) interactions in post-lingually deafened CI users. Young and elderly CI users and age-matched NH listeners performed a speeded response task on basic auditory, visual and audio-visual stimuli. Regarding the behavioral results, a redundant signals effect, that is, faster response times to cross-modal (AV) than to both of the two modality-specific stimuli (A, V), was revealed for all groups of participants. Moreover, in all four groups, we found evidence for audio-visual integration. Regarding event-related responses (ERPs), we observed a more pronounced visual modulation of the cortical auditory response at N1 latency (approximately 100 ms after stimulus onset) in the elderly CI users when compared with young CI users and elderly NH listeners. Thus, elderly CI users showed enhanced audio-visual binding which may be a consequence of compensatory strategies developed due to temporary deafness and/or degraded sensory input after implantation. These results indicate that the combination of aging, sensory deprivation and CI facilitates the coupling between the auditory and the visual modality. We suggest that this enhancement in multisensory interactions could be used to optimize auditory rehabilitation, especially in elderly CI users, by the application of strong audio-visually based rehabilitation strategies after implant switch-on. Copyright © 2015 Elsevier B.V. All rights reserved.

ICI optical data storage tape: An archival mass storage media

Science.gov (United States)

Ruddick, Andrew J.

1993-01-01

At the 1991 Conference on Mass Storage Systems and Technologies, ICI Imagedata presented a paper which introduced ICI Optical Data Storage Tape. This paper placed specific emphasis on the media characteristics and initial data was presented which illustrated the archival stability of the media. More exhaustive analysis that was carried out on the chemical stability of the media is covered. Equally important, it also addresses archive management issues associated with, for example, the benefits of reduced rewind requirements to accommodate tape relaxation effects that result from careful tribology control in ICI Optical Tape media. ICI Optical Tape media was designed to meet the most demanding requirements of archival mass storage. It is envisaged that the volumetric data capacity, long term stability and low maintenance characteristics demonstrated will have major benefits in increasing reliability and reducing the costs associated with archival storage of large data volumes.

Effect of Audio Coaching on Correlation of Abdominal Displacement With Lung Tumor Motion

International Nuclear Information System (INIS)

Nakamura, Mitsuhiro; Narita, Yuichiro; Matsuo, Yukinori; Narabayashi, Masaru; Nakata, Manabu; Sawada, Akira; Mizowaki, Takashi; Nagata, Yasushi; Hiraoka, Masahiro

2009-01-01

Purpose: To assess the effect of audio coaching on the time-dependent behavior of the correlation between abdominal motion and lung tumor motion and the corresponding lung tumor position mismatches. Methods and Materials: Six patients who had a lung tumor with a motion range >8 mm were enrolled in the present study. Breathing-synchronized fluoroscopy was performed initially without audio coaching, followed by fluoroscopy with recorded audio coaching for multiple days. Two different measurements, anteroposterior abdominal displacement using the real-time positioning management system and superoinferior (SI) lung tumor motion by X-ray fluoroscopy, were performed simultaneously. Their sequential images were recorded using one display system. The lung tumor position was automatically detected with a template matching technique. The relationship between the abdominal and lung tumor motion was analyzed with and without audio coaching. Results: The mean SI tumor displacement was 10.4 mm without audio coaching and increased to 23.0 mm with audio coaching (p < .01). The correlation coefficients ranged from 0.89 to 0.97 with free breathing. Applying audio coaching, the correlation coefficients improved significantly (range, 0.93-0.99; p < .01), and the SI lung tumor position mismatches became larger in 75% of all sessions. Conclusion: Audio coaching served to increase the degree of correlation and make it more reproducible. In addition, the phase shifts between tumor motion and abdominal displacement were improved; however, all patients breathed more deeply, and the SI lung tumor position mismatches became slightly larger with audio coaching than without audio coaching.

Audio-vestibular signs and symptoms in Chiari malformation type i. Case series and literature review.

Science.gov (United States)

Guerra Jiménez, Gloria; Mazón Gutiérrez, Ángel; Marco de Lucas, Enrique; Valle San Román, Natalia; Martín Laez, Rubén; Morales Angulo, Carmelo

2015-01-01

Chiari malformation is an alteration of the base of the skull with herniation through the foramen magnum of the brain stem and cerebellum. Although the most common presentation is occipital headache, the association of audio-vestibular symptoms is not rare. The aim of our study was to describe audio-vestibular signs and symptoms in Chiari malformation type i (CM-I). We performed a retrospective observational study of patients referred to our unit during the last 5 years. We also carried out a literature review of audio-vestibular signs and symptoms in this disease. There were 9 patients (2 males and 7 females), with an average age of 42.8 years. Five patients presented a Ménière-like syndrome; 2 cases, a recurrent vertigo with peripheral features; one patient showed a sudden hearing loss; and one case suffered a sensorineural hearing loss with early childhood onset. The most common audio-vestibular symptom indicated in the literature in patients with CM-I is unsteadiness (49%), followed by dizziness (18%), nystagmus (15%) and hearing loss (15%). Nystagmus is frequently horizontal (74%) or down-beating (18%). Other audio-vestibular signs and symptoms are tinnitus (11%), aural fullness (10%) and hyperacusis (1%). Occipital headache that increases with Valsalva manoeuvres and hand paresthesias are very suggestive symptoms. The appearance of audio-vestibular manifestations in CM-I makes it common to refer these patients to neurotologists. Unsteadiness, vertiginous syndromes and sensorineural hearing loss are frequent. Nystagmus, especially horizontal and down-beating, is not rare. It is important for neurotologists to familiarise themselves with CM-I symptoms to be able to consider it in differential diagnosis. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

Forensic Pollen Evidence from Clothes by the Tape Adhesive Method

Directory of Open Access Journals (Sweden)

Chun-Liang Wu

2006-06-01

Full Text Available Collection and identification of pollen is becoming important in forensic applications. Many criminal cases have been reported to link suspects to the crime scene by analysis of pollen. Several methods have been used in the pollen collection and analysis, but they are expensive and tedious. Therefore, it is important to develop a simple method to collect pollen grains from clothes. We tried to recover pollen from clothing surface by using the sticky tapes method. The tape adhesive method has been widely used for sample collection for various purposes, but the efficiency of recovery of invisible pollen from clothes has rarely been reported. Therefore, to test the efficiency of the tape adhesive method in recovering pollen from clothes is important. The first author wore clothes that were made from textile S made by the mixture of cotton 60% and polyester fiber 40% to collect pollen from 26 different areas mostly in the northern part of Taiwan and then used cellophane tape D (Sirchie Finger Print Lab., Inc-No. 131LT4 to recover them from different body parts. Twenty-six pollen taxa were detected in different parts of clothes depending upon what kind of plant the first author stayed near. From the results, we concluded that the tape adhesive method is suitable in recovering pollen from clothes. We have suggested that the tape adhesive method could be part of methods for collecting pollen from clothes of suspects. It is simpler, faster and less expensive than other methods.

Fabrication of high edge-definition steel-tape gratings for optical encoders

Science.gov (United States)

Ye, Guoyong; Liu, Hongzhong; Yan, Jiawei; Ban, Yaowen; Fan, Shanjin; Shi, Yongsheng; Yin, Lei

2017-10-01

High edge definition of a scale grating is the basic prerequisite for high measurement accuracy of optical encoders. This paper presents a novel fabrication method of steel tape gratings using graphene oxide nanoparticles as anti-reflective grating strips. Roll-to-roll nanoimprint lithography is adopted to manufacture the steel tape with hydrophobic and hydrophilic pattern arrays. Self-assembly technology is employed to obtain anti-reflective grating strips by depositing the graphene oxide nanoparticles on hydrophobic regions. A thin SiO2 coating is deposited on the grating to protect the grating strips. Experimental results confirm that the proposed fabrication process enables a higher edge definition in making steel-tape gratings, and the new steel tape gratings offer better performance than conventional gratings.

Humanistic approach to nursing education: lived experiences of Iranian nursing students.

Science.gov (United States)

Ghiyasvandian, Shahrzad; Bolourchifard, Fariba; Parsa Yekta, Zohreh

2014-09-28

The nurse teachers tried to have a complete understanding of the educational contents, to transfer knowledge to nursing students better, and to facilitate the process of education. The purpose of this study was to explore the lived experiences of Iranian nursing students regarding the characteristics of academic nurse teachers. In this hermeneutic phenomenological study, data were collected via in-depth, semi-structured interviews with 12 Iranian nursing students and the audio-taped and transcribed interviews analyzed according to Van Manen´s method. The main theme emerged during data analysis, was "humanistic approach to nursing education". The theme was extracted from 2 sub-themes including 'ethical necessities' and 'effective interaction'. The findings present greater understanding of humanistic approach to nursing education.

Using participatory design to develop structured training in child and adolescent psychiatry

DEFF Research Database (Denmark)

Davis, Deborah J; Ringsted, Charlotte; Bonde, Mie

2009-01-01

identified three key issues to consider in CAP residencies: (1) Preparation for tasks postgraduate trainees are expected to fulfil, (2) Ensuring acquisition of physician-specific knowledge and skills, and (3) Clarifying roles and professional identity within the team. A structured training programme......CONTEXT: Learning during residency in child and adolescent psychiatry (CAP) is primarily work-based and has traditionally been opportunistic. There are increasing demands from both postgraduate trainees and medical organisations for structured programmes with defined learning outcomes. OBJECTIVES......: Participatory design was used to structure a learning and assessment programme in CAP. First, during working seminars, consultants and postgraduate trainees were interviewed about the characteristics of the learning and working in CAP. These interviews were audio taped, transcribed and analyzed for recurrent...

Audio-Biofeedback training for posture and balance in Patients with Parkinson's disease

Directory of Open Access Journals (Sweden)

Zijlstra Wiebren

2011-06-01

Full Text Available Abstract Background Patients with Parkinson's disease (PD suffer from dysrhythmic and disturbed gait, impaired balance, and decreased postural responses. These alterations lead to falls, especially as the disease progresses. Based on the observation that postural control improved in patients with vestibular dysfunction after audio-biofeedback training, we tested the feasibility and effects of this training modality in patients with PD. Methods Seven patients with PD were included in a pilot study comprised of a six weeks intervention program. The training was individualized to each patient's needs and was delivered using an audio-biofeedback (ABF system with headphones. The training was focused on improving posture, sit-to-stand abilities, and dynamic balance in various positions. Non-parametric statistics were used to evaluate training effects. Results The ABF system was well accepted by all participants with no adverse events reported. Patients declared high satisfaction with the training. A significant improvement of balance, as assessed by the Berg Balance Scale, was observed (improvement of 3% p = 0.032, and a trend in the Timed up and go test (improvement of 11%; p = 0.07 was also seen. In addition, the training appeared to have a positive influence on psychosocial aspects of the disease as assessed by the Parkinson's disease quality of life questionnaire (PDQ-39 and the level of depression as assessed by the Geriatric Depression Scale. Conclusions This is, to our knowledge, the first report demonstrating that audio-biofeedback training for patients with PD is feasible and is associated with improvements of balance and several psychosocial aspects.

Four-quadrant flyback converter for direct audio power amplification

OpenAIRE

Ljusev, Petar; Andersen, Michael Andreas E.

2005-01-01

This paper presents a bidirectional, four-quadrant flyback converter for use in direct audio power amplification. When compared to the standard Class-D switching audio power amplifier with a separate power supply, the proposed four-quadrant flyback converter provides simple solution with better efficiency, higher level of integration and lower component count.

The impact of self-interviews on response patterns for sensitive topics: a randomized trial of electronic delivery methods for a sexual behaviour questionnaire in rural South Africa

Directory of Open Access Journals (Sweden)

Guy Harling

2017-08-01

Full Text Available Abstract Background Self-interviews, where the respondent rather than the interviewer enters answers to questions, have been proposed as a way to reduce social desirability bias associated with interviewer-led interviews. Computer-assisted self-interviews (CASI are commonly proposed since the computer programme can guide respondents; however they require both language and computer literacy. We evaluated the feasibility and acceptability of using electronic methods to administer quantitative sexual behaviour questionnaires in the Somkhele demographic surveillance area (DSA in rural KwaZulu-Natal, South Africa. Methods We conducted a four-arm randomized trial of paper-and-pen-interview, computer-assisted personal-interview (CAPI, CASI and audio-CASI with an age-sex-urbanicity stratified sample of 504 adults resident in the DSA in 2015. We compared respondents’ answers to their responses to the same questions in previous surveillance rounds. We also conducted 48 cognitive interviews, dual-coding responses using the Framework approach. Results Three hundred forty (67% individuals were interviewed and covariates and participation rates were balanced across arms. CASI and audio-CASI were significantly slower than interviewer-led interviews. Item non-response rates were higher in self-interview arms. In single-paper meta-analysis, self-interviewed individuals reported more socially undesirable sexual behaviours. Cognitive interviews found high acceptance of both self-interviews and the use of electronic methods, with some concerns that self-interview methods required more participant effort and literacy. Conclusions Electronic data collection methods, including self-interview methods, proved feasible and acceptable for completing quantitative sexual behaviour questionnaires in a poor, rural South African setting. However, each method had both benefits and costs, and the choice of method should be based on context-specific criteria.

Engineering Critical Current Density Improvement in Ag- Bi-2223 Tapes

DEFF Research Database (Denmark)

Wang, W. G.; Seifi, Behrouz; Eriksen, Morten

2000-01-01

Ag alloy sheathed Bi-2223 multifilament tapes were produced by the powder-in-tube method. Engineering critical current density improvement has been achieved through both enhancement of critical current density by control of the thermal behavior of oxide powder and by an increase of the filling...... factor of the tapes. Phase evolution at initial sintering stage has been studied by a quench experiment in Ag-Bi-2223 tapes. The content, texture, and microstructure of various phases were determined by XRD and SEM. A novel process approach has been invented in which square wire was chosen rather than...

Semantic Analysis of Multimedial Information Usign Both Audio and Visual Clues

Directory of Open Access Journals (Sweden)

Andrej Lukac

2008-01-01

Full Text Available Nowadays, there is a lot of information in databases (text, audio/video form, etc.. It is important to be able to describe this data for better orientation in them. It is necessary to apply audio/video properties, which are used for metadata management, segmenting the document into semantically meaningful units, classifying each unit into a predefined scene type, indexing, summarizing the document for efficient retrieval and browsing. Data can be used for system that automatically searches for a specific person in a sequence also for special video sequences. Audio/video properties are presented by descriptors and description schemes. There are many features that can be used to characterize multimedial signals. We can analyze audio and video sequences jointly or considered them completely separately. Our aim is oriented to possibilities of combining multimedial features. Focus is direct into discussion programs, because there are more decisions how to combine audio features with video sequences.

Self-oscillating modulators for direct energy conversion audio power amplifiers

Energy Technology Data Exchange (ETDEWEB)

Ljusev, P.; Andersen, Michael A.E.

2005-07-01

Direct energy conversion audio power amplifier represents total integration of switching-mode power supply and Class D audio power amplifier into one compact stage, achieving high efficiency, high level of integration, low component count and eventually low cost. This paper presents how self-oscillating modulators can be used with the direct switching-mode audio power amplifier to improve its performance by providing fast hysteretic control with high power supply rejection ratio, open-loop stability and high bandwidth. Its operation is thoroughly analyzed and simulated waveforms of a prototype amplifier are presented. (au)

Rehabilitation of balance-impaired stroke patients through audio-visual biofeedback

DEFF Research Database (Denmark)

Gheorghe, Cristina; Nissen, Thomas; Juul Rosengreen Christensen, Daniel

2015-01-01

This study explored how audio-visual biofeedback influences physical balance of seven balance-impaired stroke patients, between 33–70 years-of-age. The setup included a bespoke balance board and a music rhythm game. The procedure was designed as follows: (1) a control group who performed a balance...... training exercise without any technological input, (2) a visual biofeedback group, performing via visual input, and (3) an audio-visual biofeedback group, performing via audio and visual input. Results retrieved from comparisons between the data sets (2) and (3) suggested superior postural stability...

Local Control of Audio Environment: A Review of Methods and Applications

Directory of Open Access Journals (Sweden)

Jussi Kuutti

2014-02-01

Full Text Available The concept of a local audio environment is to have sound playback locally restricted such that, ideally, adjacent regions of an indoor or outdoor space could exhibit their own individual audio content without interfering with each other. This would enable people to listen to their content of choice without disturbing others next to them, yet, without any headphones to block conversation. In practice, perfect sound containment in free air cannot be attained, but a local audio environment can still be satisfactorily approximated using directional speakers. Directional speakers may be based on regular audible frequencies or they may employ modulated ultrasound. Planar, parabolic, and array form factors are commonly used. The directivity of a speaker improves as its surface area and sound frequency increases, making these the main design factors for directional audio systems. Even directional speakers radiate some sound outside the main beam, and sound can also reflect from objects. Therefore, directional speaker systems perform best when there is enough ambient noise to mask the leaking sound. Possible areas of application for local audio include information and advertisement audio feed in commercial facilities, guiding and narration in museums and exhibitions, office space personalization, control room messaging, rehabilitation environments, and entertainment audio systems.

Magneto-optical and electromagnetic studies of core connectivity and weak-link behaviour in Cu/MgB2 and Ni/MgB2 wires and tapes

International Nuclear Information System (INIS)

Polyanskii, A; Beilin, V; Felner, I; Tsindlekht, M I; Yashchin, E; Dul'kin, E; Galstyan, E; Roth, M; Senkowicz, B; Hellstrom, E

2004-01-01

Critical current density, ac susceptibility (real part χ' and magneto-optical (MO) imaging were used to characterize round wire and tapes made from pre-reacted MgB 2 powder by the powder-in-tube method. Magnetic susceptibility measurements indicated the existence of large-scale weak-link networks in the cores of as-deformed Ni/MgB 2 and Cu/MgB 2 wires and tapes. As-deformed samples showed a two-step transition in χ' versus T traces as evidence of weak links in the tape core. The first heat treatment (HT) of as-deformed tapes led to a sharp susceptibility transition, very strong connection in the tape core as seen in MO images, and high critical current. A second rolling of an as-sintered tape induced a network of defects in the brittle core and gave rise to χ' curve broadening, but did not result in a two-step transition. These data show that deformation-induced cracks are not the primary source of weak-link behaviour. A large decrease in transport current was also registered in this sample. The second HT, for 30 min, restored the sharp magnetic transition and high transport current. Alternating areas of strong and weak connection in the tape core have been observed on MO images. Fast heating and cooling of the as-deformed tape with no dwell time at the maximum temperature resulted in a strongly linked core with a sharp transition and increased transport current. After fast HT, no mechanical defects were observed in MO images. Such fast transformation could be explained by rapid sintering due to highly strained MgB 2 grains

Unimodal Learning Enhances Crossmodal Learning in Robotic Audio-Visual Tracking

DEFF Research Database (Denmark)

Shaikh, Danish; Bodenhagen, Leon; Manoonpong, Poramate

2017-01-01

Crossmodal sensory integration is a fundamental feature of the brain that aids in forming an coherent and unified representation of observed events in the world. Spatiotemporally correlated sensory stimuli brought about by rich sensorimotor experiences drive the development of crossmodal integrat...... a non-holonomic robotic agent towards a moving audio-visual target. Simulation results demonstrate that unimodal learning enhances crossmodal learning and improves both the overall accuracy and precision of multisensory orientation response....

Unimodal Learning Enhances Crossmodal Learning in Robotic Audio-Visual Tracking

DEFF Research Database (Denmark)

Shaikh, Danish; Bodenhagen, Leon; Manoonpong, Poramate

2018-01-01

Crossmodal sensory integration is a fundamental feature of the brain that aids in forming an coherent and unified representation of observed events in the world. Spatiotemporally correlated sensory stimuli brought about by rich sensorimotor experiences drive the development of crossmodal integrat...... a non-holonomic robotic agent towards a moving audio-visual target. Simulation results demonstrate that unimodal learning enhances crossmodal learning and improves both the overall accuracy and precision of multisensory orientation response....

Nutritional rehabilitation after ICU - does it happen: a qualitative interview and observational study.

Science.gov (United States)

Merriweather, Judith; Smith, Pam; Walsh, Timothy

2014-03-01

To compare and contrast current nutritional rehabilitation practices against recommendations from National Institute for Health and Excellence guideline Rehabilitation after critical illness (NICE) (2009, http://www.nice.org.uk/cg83). Recovery from critical illness has gained increasing prominence over the last decade but there is remarkably little research relating to nutritional rehabilitation. The study is a qualitative study based on patient interviews and observations of ward practice. Seventeen patients were recruited into the study at discharge from the intensive care unit (ICU) of a large teaching hospital in central Scotland in 2011. Semi-structured interviews were conducted on transfer to the ward and weekly thereafter. Fourteen of these patients were followed up at three months post-ICU discharge, and a semi-structured interview was carried out. Observations of ward practice were carried out twice weekly for the duration of the ward stay. Current nutritional practice for post-intensive care patients did not reflect the recommendations from the NICE guideline. A number of organisational issues were identified as influencing nutritional care. These issues were categorised as ward culture, service-centred delivery of care and disjointed discharge planning. Their influence on nutritional care was compounded by the complex problems associated with critical illness. The NICE guideline provides few nutrition-specific recommendations for rehabilitation; however, current practice does not reflect the nutritional recommendations that are detailed in the rehabilitation care pathway. Nutritional care of post-ICU patients is problematic and strategies to overcome these issues need to be addressed in order to improve nutritional intake. © 2013 John Wiley & Sons Ltd.

Comparison of self-field effects between Bi-2223/Ag tapes and pancake coils

International Nuclear Information System (INIS)

Alamgir, A.K.M.; Gu, C.; Han, Z.

2005-01-01

Knowledge on self-field behavior in HTS tape and coil becomes important for the design of HTS devices. We report on the comparative nature and influence of self-field in Bi-2223/Ag tape and pancake coils in terms of critical current and ac loss. Measured dc and ac properties of short tape and pancake coils are verified based on the self-field. It is proved that perpendicular component of self-field acting in opposite direction at the two halves of tape-width determines critical current in short tape and single-turn coil. On the other hand, perpendicular component of self-field pointed in the same direction at the two halves of tape-width determines critical current in multi-turn coils. Influence of magnitude and orientation of self-field on ac loss is also investigated for a series of pancake coils based on the measured self-field ac loss in short sample

Comparison of self-field effects between Bi-2223/Ag tapes and pancake coils

Energy Technology Data Exchange (ETDEWEB)

Alamgir, A.K.M. [Applied Superconductivity Research Center, Department of Physics, Tsinghua University, Building Li Zhai, Room 209, Beijing 100084 (China)]. E-mail: alam643@yahoo.com; Gu, C. [Applied Superconductivity Research Center, Department of Physics, Tsinghua University, Building Li Zhai, Room 209, Beijing 100084 (China); Han, Z. [Applied Superconductivity Research Center, Department of Physics, Tsinghua University, Building Li Zhai, Room 209, Beijing 100084 (China)

2005-08-15

Knowledge on self-field behavior in HTS tape and coil becomes important for the design of HTS devices. We report on the comparative nature and influence of self-field in Bi-2223/Ag tape and pancake coils in terms of critical current and ac loss. Measured dc and ac properties of short tape and pancake coils are verified based on the self-field. It is proved that perpendicular component of self-field acting in opposite direction at the two halves of tape-width determines critical current in short tape and single-turn coil. On the other hand, perpendicular component of self-field pointed in the same direction at the two halves of tape-width determines critical current in multi-turn coils. Influence of magnitude and orientation of self-field on ac loss is also investigated for a series of pancake coils based on the measured self-field ac loss in short sample.

Tape casting and partial melting of Bi-2212 thick films

Energy Technology Data Exchange (ETDEWEB)

Buhl, D.; Lang, T.; Heeb, B. [Nichtmetallische Werkstoffe, Zuerich (Switzerland)] [and others

1994-12-31

To produce Bi-2212 thick films with high critical current densities tape casting and partial melting is a promising fabrication method. Bi-2212 powder and organic additives were mixed into a slurry and tape casted onto glass by the doctor blade tape casting process. The films were cut from the green tape and partially molten on Ag foils during heat treatment. We obtained almost single-phase and well-textured films over the whole thickness of 20 {mu}m. The orientation of the (a,b)-plane of the grains were parallel to the substrate with a misalignment of less than 6{degrees}. At 77K/OT a critical current density of 15`000 A/cm{sup 2} was reached in films of the dimension 1cm x 2cm x 20{mu}m (1{mu}V/cm criterion, resistively measured). At 4K/OT the highest value was 350`000 A/cm{sup 2} (1nV/cm criterion, magnetically measured).

Ankle Taping Does Not Impair Performance in Jump or Balance Tests

OpenAIRE

Abián-Vicén, Javier; Alegre, Luis M.; Fernández-Rodríguez, J. Manuel; Lara, Amador J.; Meana, Marta; Aguado, Xavier

2008-01-01

This study aimed to investigate the influence of prophylactic ankle taping on two balance tests (static and dynamic balance) and one jump test, in the push off and the landing phase. Fifteen active young subjects (age: 21.0 ± 4.4 years) without previous ankle injuries volunteered for the study. Each participant performed three tests in two different situations: with taping and without taping. The tests were a counter movement jump, static balance, and a dynamic posturography test. The tests a...

Balancing Audio

DEFF Research Database (Denmark)

Walther-Hansen, Mads

2016-01-01

is not thoroughly understood. In this paper I treat balance as a metaphor that we use to reason about several different actions in music production, such as adjusting levels, editing the frequency spectrum or the spatiality of the recording. This study is based on an exploration of a linguistic corpus of sound......This paper explores the concept of balance in music production and examines the role of conceptual metaphors in reasoning about audio editing. Balance may be the most central concept in record production, however, the way we cognitively understand and respond meaningfully to a mix requiring balance...

Four-quadrant flyback converter for direct audio power amplification

Energy Technology Data Exchange (ETDEWEB)

Ljusev, P.; Andersen, Michael A.E.

2005-07-01

This paper presents a bidirectional, four-quadrant yback converter for use in direct audio power amplication. When compared to the standard Class-D switching-mode audio power amplier with separate power supply, the proposed four-quadrant flyback converter provides simple and compact solution with high efciency, higher level of integration, lower component count, less board space and eventually lower cost. Both peak and average current-mode control for use with 4Q flyback power converters are described and compared. Integrated magnetics is presented which simplies the construction of the auxiliary power supplies for control biasing and isolated gate drives. The feasibility of the approach is proven on audio power amplier prototype for subwoofer applications. (au)

Effects of low-dye taping on plantar pressure pre and post exercise: an exploratory study.

LENUS (Irish Health Repository)

Nolan, Damien

2009-01-01

BACKGROUND: Low-Dye taping is used for excessive pronation at the subtalar joint of the foot. Previous research has focused on the tape\\'s immediate effect on plantar pressure. Its effectiveness following exercise has not been investigated. Peak plantar pressure distribution provides an indirect representation of subtalar joint kinematics. The objectives of the study were 1) To determine the effects of Low-Dye taping on peak plantar pressure immediately post-application. 2) To determine whether any initial effects are maintained following exercise. METHODS: 12 asymptomatic subjects participated; each being screened for excessive pronation (navicular drop > 10 mm). Plantar pressure data was recorded, using the F-scan, at four intervals during the testing session: un-taped, baseline-taped, post-exercise session 1, and post-exercise session 2. Each exercise session consisted of a 10-minute walk at a normal pace. The foot was divided into 6 regions during data analysis. Repeated-measures analysis of variance (ANOVA) was used to assess regional pressure variations across the four testing conditions. RESULTS: Reduced lateral forefoot peak plantar pressure was the only significant difference immediately post tape application (p = 0.039). This effect was lost after 10 minutes of exercise (p = 0.036). Each exercise session resulted in significantly higher medial forefoot peak pressure compared to un-taped; (p = 0.015) and (p = 0.014) respectively, and baseline-taped; (p = 0.036) and (p = 0.015) respectively. Medial and lateral rearfoot values had also increased after the second session (p = 0.004), following their non-significant reduction at baseline-taped. A trend towards a medial-to-lateral shift in pressure present in the midfoot immediately following tape application was still present after 20 minutes of exercise. CONCLUSION: Low-Dye tape\\'s initial effect of reduced lateral forefoot peak plantar pressure was lost after a 10-minute walk. However, the tape continued

Effect of the Kinesio tape to muscle activity and vertical jump performance in healthy inactive people

Directory of Open Access Journals (Sweden)

Lu Szu-Ching

2011-08-01

Full Text Available Abstract Background Elastic taping applied on the triceps surae has been commonly used to improve the performance of lower extremities. However, little objective evidence has been documented. The purpose of this study was to investigate the effect of elastic taping on the triceps surae during a maximal vertical jump. It was hypothesized that elastic taping to the triceps surae would increase muscle activity and cause positive effect to jump height. Methods Thirty-one healthy adults (19 males and 12 females with mean age, body weight and height for 25.3 ± 3.8 years old, 64.1 ± 6.2 kg, and 169.4 ± 7.3 cm, respectively were recruited. All participants performed vertical jump tests prior to (without taping and during elastic taping. Two elastic tapes, Kinesio tape and Mplacebo tape from two different manufacturers, were applied to the participants, respectively. Results The results showed that the vertical ground reaction force increased when Kinesio tape was applied even when the height of jump remained about constant. However, the height of the jump decreased, and there was no difference on the vertical ground reaction force in Mplacebo taping group. Although the EMG activity of medial gastrocnemius tended to increase in Kinesio taping group, we did not see differences in EMG activity for the medial gastrocnemius, tibialis anterior and soleus muscles in either group. Conclusions Based on the varied effects of Kinesio tape and Mplacebo tape, different intervention technique was suggested for specific purpose during vertical jump movement. Mplacebo tape was demanded for the benefits of stabilization, protection, and the restriction of motion at the ankle joint. On the other hand, the findings may implicate benefits for medial gastrocnemius muscle strength and push-off force when using Kinesio tape.

Influence of TVT properties on outcomes of midurethral sling procedures: high-stiffness versus low-stiffness tape.

Science.gov (United States)

Prien-Larsen, Jens Christian; Prien-Larsen, Thomas; Cieslak, Lars; Dessau, Ram B

2016-07-01

Although there is clear consensus on the use of monofilament polypropylene tapes for treating stress urinary incontinence (SUI), tapes differ in weight, stiffness, and elasticity. In this study, we compared outcomes of two tape types: high-stiffness Intramesh SOFT L.I.F.T versus low-stiffness Intramesh L.I.F.T. tape. Our null hypothesis was that in terms of performance, SOFT tape equaled L.I.F.T. tape. Six hundred and sixty women underwent prospective transvaginal tape (TVT) surgery for SUI: 210 had the SOFT tape placed and 450 the L.I.F.T. tape. Follow-ups were scheduled at 3 and 12 months. Objective cure at 3-months' follow-up was 87 % in the SOFT group vs 94 % in the L.I.F.T. group (p = 0.003) and at 12 months 86 vs 96 % (p = 0.0004), respectively. Subjective outcomes were equal. For SOFT tape, the objective failure rate at 3 months was especially pronounced in women older than 70 years: 31 vs 10 % (p = 0.008), and subjective failure was 24 vs 7 % (p = 0.01). At 12 months, objective failure for the SOFT tape was significantly higher in both age groups compared with L.I.F.T. [odds ratio (OR) 2.17]. Multivariate analysis showed that body mass index (BMI) ≥30 (OR 2.41), mixed incontinence (MUI) (OR 2.24), use of SOFT tape (OR 2.17), and age ≥ 70 years are significant independent risk factors for surgical failure. Outcomes with SOFT tape are significantly inferior than with L.I.F.T. tape, especially among elderly women. Therefore, the two variants of monofilament polypropylene tape are not interchangeable.