WorldWideScience

Sample records for object-oriented fault tree

  1. Object-oriented fault tree evaluation program for quantitative analyses

    Science.gov (United States)

    Patterson-Hine, F. A.; Koen, B. V.

    1988-01-01

    Object-oriented programming can be combined with fault free techniques to give a significantly improved environment for evaluating the safety and reliability of large complex systems for space missions. Deep knowledge about system components and interactions, available from reliability studies and other sources, can be described using objects that make up a knowledge base. This knowledge base can be interrogated throughout the design process, during system testing, and during operation, and can be easily modified to reflect design changes in order to maintain a consistent information source. An object-oriented environment for reliability assessment has been developed on a Texas Instrument (TI) Explorer LISP workstation. The program, which directly evaluates system fault trees, utilizes the object-oriented extension to LISP called Flavors that is available on the Explorer. The object representation of a fault tree facilitates the storage and retrieval of information associated with each event in the tree, including tree structural information and intermediate results obtained during the tree reduction process. Reliability data associated with each basic event are stored in the fault tree objects. The object-oriented environment on the Explorer also includes a graphical tree editor which was modified to display and edit the fault trees.

  2. Direct evaluation of fault trees using object-oriented programming techniques

    Science.gov (United States)

    Patterson-Hine, F. A.; Koen, B. V.

    1989-01-01

    Object-oriented programming techniques are used in an algorithm for the direct evaluation of fault trees. The algorithm combines a simple bottom-up procedure for trees without repeated events with a top-down recursive procedure for trees with repeated events. The object-oriented approach results in a dynamic modularization of the tree at each step in the reduction process. The algorithm reduces the number of recursive calls required to solve trees with repeated events and calculates intermediate results as well as the solution of the top event. The intermediate results can be reused if part of the tree is modified. An example is presented in which the results of the algorithm implemented with conventional techniques are compared to those of the object-oriented approach.

  3. Reliability database development for use with an object-oriented fault tree evaluation program

    Science.gov (United States)

    Heger, A. Sharif; Harringtton, Robert J.; Koen, Billy V.; Patterson-Hine, F. Ann

    1989-01-01

    A description is given of the development of a fault-tree analysis method using object-oriented programming. In addition, the authors discuss the programs that have been developed or are under development to connect a fault-tree analysis routine to a reliability database. To assess the performance of the routines, a relational database simulating one of the nuclear power industry databases has been constructed. For a realistic assessment of the results of this project, the use of one of existing nuclear power reliability databases is planned.

  4. Parallel object-oriented decision tree system

    Science.gov (United States)

    Kamath,; Chandrika, Cantu-Paz [Dublin, CA; Erick, [Oakland, CA

    2006-02-28

    A data mining decision tree system that uncovers patterns, associations, anomalies, and other statistically significant structures in data by reading and displaying data files, extracting relevant features for each of the objects, and using a method of recognizing patterns among the objects based upon object features through a decision tree that reads the data, sorts the data if necessary, determines the best manner to split the data into subsets according to some criterion, and splits the data.

  5. The use of an object oriented technique for fault diagnosis in nuclear reactors

    International Nuclear Information System (INIS)

    Jalel, N.A.; Nicholson, H.

    1990-11-01

    In recent years there has been an increased growth of interest in object oriented programming which is a new approach to software construction having wide application. The possibility of using object oriented programming to build a software package that will assist the nuclear reactor operator in diagnosing any faults or alarms in the Loss Of Fluid Test (LOFT), a small scale pressurised water reactor, reactor is investigated in this work. (author)

  6. Fuzzy Concurrent Object Oriented Expert System for Fault Diagnosis in 8085 Microprocessor Based System Board

    OpenAIRE

    Mr.D. V. Kodavade; Dr. Mrs.S.D.Apte

    2014-01-01

    With the acceptance of artificial intelligence paradigm, a number of successful artificial intelligence systems were created. Fault diagnosis in microprocessor based boards needs lot of empirical knowledge and expertise and is a true artificial intelligence problem. Research on fault diagnosis in microprocessor based system boards using new fuzzy-object oriented approach is presented in this paper. There are many uncertain situations observed during fault diagnosis. These uncertain situations...

  7. An object-oriented forest landscape model and its representation of tree species

    Science.gov (United States)

    Hong S. He; David J. Mladenoff; Joel Boeder

    1999-01-01

    LANDIS is a forest landscape model that simulates the interaction of large landscape processes and forest successional dynamics at tree species level. We discuss how object-oriented design (OOD) approaches such as modularity, abstraction and encapsulation are integrated into the design of LANDIS. We show that using OOD approaches, model decisions (olden as model...

  8. Fault tree handbook

    International Nuclear Information System (INIS)

    Haasl, D.F.; Roberts, N.H.; Vesely, W.E.; Goldberg, F.F.

    1981-01-01

    This handbook describes a methodology for reliability analysis of complex systems such as those which comprise the engineered safety features of nuclear power generating stations. After an initial overview of the available system analysis approaches, the handbook focuses on a description of the deductive method known as fault tree analysis. The following aspects of fault tree analysis are covered: basic concepts for fault tree analysis; basic elements of a fault tree; fault tree construction; probability, statistics, and Boolean algebra for the fault tree analyst; qualitative and quantitative fault tree evaluation techniques; and computer codes for fault tree evaluation. Also discussed are several example problems illustrating the basic concepts of fault tree construction and evaluation

  9. An object-oriented classification method of high resolution imagery based on improved AdaTree

    International Nuclear Information System (INIS)

    Xiaohe, Zhang; Liang, Zhai; Jixian, Zhang; Huiyong, Sang

    2014-01-01

    With the popularity of the application using high spatial resolution remote sensing image, more and more studies paid attention to object-oriented classification on image segmentation as well as automatic classification after image segmentation. This paper proposed a fast method of object-oriented automatic classification. First, edge-based or FNEA-based segmentation was used to identify image objects and the values of most suitable attributes of image objects for classification were calculated. Then a certain number of samples from the image objects were selected as training data for improved AdaTree algorithm to get classification rules. Finally, the image objects could be classified easily using these rules. In the AdaTree, we mainly modified the final hypothesis to get classification rules. In the experiment with WorldView2 image, the result of the method based on AdaTree showed obvious accuracy and efficient improvement compared with the method based on SVM with the kappa coefficient achieving 0.9242

  10. Fault tree graphics

    International Nuclear Information System (INIS)

    Bass, L.; Wynholds, H.W.; Porterfield, W.R.

    1975-01-01

    Described is an operational system that enables the user, through an intelligent graphics terminal, to construct, modify, analyze, and store fault trees. With this system, complex engineering designs can be analyzed. This paper discusses the system and its capabilities. Included is a brief discussion of fault tree analysis, which represents an aspect of reliability and safety modeling

  11. Object oriented fault diagnosis system for space shuttle main engine redlines

    Science.gov (United States)

    Rogers, John S.; Mohapatra, Saroj Kumar

    1990-01-01

    A great deal of attention has recently been given to Artificial Intelligence research in the area of computer aided diagnostics. Due to the dynamic and complex nature of space shuttle red-line parameters, a research effort is under way to develop a real time diagnostic tool that will employ historical and engineering rulebases as well as a sensor validity checking. The capability of AI software development tools (KEE and G2) will be explored by applying object oriented programming techniques in accomplishing the diagnostic evaluation.

  12. Online Open Circuit Fault Diagnosis for Rail Transit Traction Converter Based on Object-Oriented Colored Petri Net Topology Reasoning

    Directory of Open Access Journals (Sweden)

    Lei Wang

    2016-01-01

    Full Text Available For online open circuit fault diagnosis of the traction converter in rail transit vehicles, conventional approaches depend heavily on component parameters and circuit layouts. For better universality and less parameter sensitivity during the diagnosis, this paper proposes a novel topology analysis approach to diagnose switching device open circuit failures. During the diagnosis, the topology is analyzed with fault reasoning mechanism, which is based on object-oriented Petri net (OOCPN. The OOCPN model takes in digitalized current inputs as fault signatures, and dynamical transitions between discrete switching states of a circuit with broken device are symbolized with the dynamical transitions of colored tokens in OOCPN. Such transitions simulate natural reasoning process of an expert’s brain during diagnosis. The dependence on component parameters and on circuit layouts is finally eliminated by such circuit topology reasoning process. In the last part, the proposed online reasoning and diagnosis process is exemplified with the case of a certain switching device failure in the power circuit of traction converter.

  13. Woodland Mapping at Single-Tree Levels Using Object-Oriented Classification of Unmanned Aerial Vehicle (uav) Images

    Science.gov (United States)

    Chenari, A.; Erfanifard, Y.; Dehghani, M.; Pourghasemi, H. R.

    2017-09-01

    Remotely sensed datasets offer a reliable means to precisely estimate biophysical characteristics of individual species sparsely distributed in open woodlands. Moreover, object-oriented classification has exhibited significant advantages over different classification methods for delineation of tree crowns and recognition of species in various types of ecosystems. However, it still is unclear if this widely-used classification method can have its advantages on unmanned aerial vehicle (UAV) digital images for mapping vegetation cover at single-tree levels. In this study, UAV orthoimagery was classified using object-oriented classification method for mapping a part of wild pistachio nature reserve in Zagros open woodlands, Fars Province, Iran. This research focused on recognizing two main species of the study area (i.e., wild pistachio and wild almond) and estimating their mean crown area. The orthoimage of study area was consisted of 1,076 images with spatial resolution of 3.47 cm which was georeferenced using 12 ground control points (RMSE=8 cm) gathered by real-time kinematic (RTK) method. The results showed that the UAV orthoimagery classified by object-oriented method efficiently estimated mean crown area of wild pistachios (52.09±24.67 m2) and wild almonds (3.97±1.69 m2) with no significant difference with their observed values (α=0.05). In addition, the results showed that wild pistachios (accuracy of 0.90 and precision of 0.92) and wild almonds (accuracy of 0.90 and precision of 0.89) were well recognized by image segmentation. In general, we concluded that UAV orthoimagery can efficiently produce precise biophysical data of vegetation stands at single-tree levels, which therefore is suitable for assessment and monitoring open woodlands.

  14. WOODLAND MAPPING AT SINGLE-TREE LEVELS USING OBJECT-ORIENTED CLASSIFICATION OF UNMANNED AERIAL VEHICLE (UAV IMAGES

    Directory of Open Access Journals (Sweden)

    A. Chenari

    2017-09-01

    Full Text Available Remotely sensed datasets offer a reliable means to precisely estimate biophysical characteristics of individual species sparsely distributed in open woodlands. Moreover, object-oriented classification has exhibited significant advantages over different classification methods for delineation of tree crowns and recognition of species in various types of ecosystems. However, it still is unclear if this widely-used classification method can have its advantages on unmanned aerial vehicle (UAV digital images for mapping vegetation cover at single-tree levels. In this study, UAV orthoimagery was classified using object-oriented classification method for mapping a part of wild pistachio nature reserve in Zagros open woodlands, Fars Province, Iran. This research focused on recognizing two main species of the study area (i.e., wild pistachio and wild almond and estimating their mean crown area. The orthoimage of study area was consisted of 1,076 images with spatial resolution of 3.47 cm which was georeferenced using 12 ground control points (RMSE=8 cm gathered by real-time kinematic (RTK method. The results showed that the UAV orthoimagery classified by object-oriented method efficiently estimated mean crown area of wild pistachios (52.09±24.67 m2 and wild almonds (3.97±1.69 m2 with no significant difference with their observed values (α=0.05. In addition, the results showed that wild pistachios (accuracy of 0.90 and precision of 0.92 and wild almonds (accuracy of 0.90 and precision of 0.89 were well recognized by image segmentation. In general, we concluded that UAV orthoimagery can efficiently produce precise biophysical data of vegetation stands at single-tree levels, which therefore is suitable for assessment and monitoring open woodlands.

  15. Fault tree analysis

    International Nuclear Information System (INIS)

    1981-09-01

    Suggestion are made concerning the method of the fault tree analysis, the use of certain symbols in the examination of system failures. This purpose of the fault free analysis is to find logical connections of component or subsystem failures leading to undesirable occurrances. The results of these examinations are part of the system assessment concerning operation and safety. The objectives of the analysis are: systematical identification of all possible failure combinations (causes) leading to a specific undesirable occurrance, finding of reliability parameters such as frequency of failure combinations, frequency of the undesirable occurrance or non-availability of the system when required. The fault tree analysis provides a near and reconstructable documentation of the examination. (orig./HP) [de

  16. Introduction to fault tree analysis

    International Nuclear Information System (INIS)

    Barlow, R.E.; Lambert, H.E.

    1975-01-01

    An elementary, engineering oriented introduction to fault tree analysis is presented. The basic concepts, techniques and applications of fault tree analysis, FTA, are described. The two major steps of FTA are identified as (1) the construction of the fault tree and (2) its evaluation. The evaluation of the fault tree can be qualitative or quantitative depending upon the scope, extensiveness and use of the analysis. The advantages, limitations and usefulness of FTA are discussed

  17. Summary: beyond fault trees to fault graphs

    International Nuclear Information System (INIS)

    Alesso, H.P.; Prassinos, P.; Smith, C.F.

    1984-09-01

    Fault Graphs are the natural evolutionary step over a traditional fault-tree model. A Fault Graph is a failure-oriented directed graph with logic connectives that allows cycles. We intentionally construct the Fault Graph to trace the piping and instrumentation drawing (P and ID) of the system, but with logical AND and OR conditions added. Then we evaluate the Fault Graph with computer codes based on graph-theoretic methods. Fault Graph computer codes are based on graph concepts, such as path set (a set of nodes traveled on a path from one node to another) and reachability (the complete set of all possible paths between any two nodes). These codes are used to find the cut-sets (any minimal set of component failures that will fail the system) and to evaluate the system reliability

  18. Integrated fault tree development environment

    International Nuclear Information System (INIS)

    Dixon, B.W.

    1986-01-01

    Probabilistic Risk Assessment (PRA) techniques are utilized in the nuclear industry to perform safety analyses of complex defense-in-depth systems. A major effort in PRA development is fault tree construction. The Integrated Fault Tree Environment (IFTREE) is an interactive, graphics-based tool for fault tree design. IFTREE provides integrated building, editing, and analysis features on a personal workstation. The design philosophy of IFTREE is presented, and the interface is described. IFTREE utilizes a unique rule-based solution algorithm founded in artificial intelligence (AI) techniques. The impact of the AI approach on the program design is stressed. IFTREE has been developed to handle the design and maintenance of full-size living PRAs and is currently in use

  19. Computer aided construction of fault tree

    International Nuclear Information System (INIS)

    Kovacs, Z.

    1982-01-01

    Computer code CAT for the automatic construction of the fault tree is briefly described. Code CAT makes possible simple modelling of components using decision tables, it accelerates the fault tree construction process, constructs fault trees of different complexity, and is capable of harmonized co-operation with programs PREPandKITT 1,2 for fault tree analysis. The efficiency of program CAT and thus the accuracy and completeness of fault trees constructed significantly depends on the compilation and sophistication of decision tables. Currently, program CAT is used in co-operation with programs PREPandKITT 1,2 in reliability analyses of nuclear power plant systems. (B.S.)

  20. Integrating cyber attacks within fault trees

    International Nuclear Information System (INIS)

    Nai Fovino, Igor; Masera, Marcelo; De Cian, Alessio

    2009-01-01

    In this paper, a new method for quantitative security risk assessment of complex systems is presented, combining fault-tree analysis, traditionally used in reliability analysis, with the recently introduced Attack-tree analysis, proposed for the study of malicious attack patterns. The combined use of fault trees and attack trees helps the analyst to effectively face the security challenges posed by the introduction of modern ICT technologies in the control systems of critical infrastructures. The proposed approach allows considering the interaction of malicious deliberate acts with random failures. Formal definitions of fault tree and attack tree are provided and a mathematical model for the calculation of system fault probabilities is presented.

  1. Integrating cyber attacks within fault trees

    Energy Technology Data Exchange (ETDEWEB)

    Nai Fovino, Igor [Joint Research Centre - EC, Institute for the Protection and Security of the Citizen, Ispra, VA (Italy)], E-mail: igor.nai@jrc.it; Masera, Marcelo [Joint Research Centre - EC, Institute for the Protection and Security of the Citizen, Ispra, VA (Italy); De Cian, Alessio [Department of Electrical Engineering, University di Genova, Genoa (Italy)

    2009-09-15

    In this paper, a new method for quantitative security risk assessment of complex systems is presented, combining fault-tree analysis, traditionally used in reliability analysis, with the recently introduced Attack-tree analysis, proposed for the study of malicious attack patterns. The combined use of fault trees and attack trees helps the analyst to effectively face the security challenges posed by the introduction of modern ICT technologies in the control systems of critical infrastructures. The proposed approach allows considering the interaction of malicious deliberate acts with random failures. Formal definitions of fault tree and attack tree are provided and a mathematical model for the calculation of system fault probabilities is presented.

  2. Object oriented programming

    International Nuclear Information System (INIS)

    Kunz, P.F.

    1990-01-01

    This paper is an introduction to object oriented programming techniques. It tries to explain the concepts by using analogies with traditional programming. The object oriented approach not inherently difficult, but most programmers find a relatively high threshold in learning it. Thus, this paper will attempt to convey the concepts with examples rather than explain the formal theory

  3. System safety and reliability using object-oriented programming techniques

    International Nuclear Information System (INIS)

    Patterson-Hine, F.A.; Koen, B.V.

    1987-01-01

    Direct evaluation fault tree codes have been written in recursive, list-processing computer languages such as PL/1 (PATREC-I) and LISP (PATREC-L). The pattern-matching strategy implemented in these codes has been used extensively in France to evaluate system reliability. Recent reviews of the risk management process suggest that a data base containing plant-specific information be integrated with a package of codes used for probabilistic risk assessment (PRA) to alleviate some of the difficulties that make a PRA so costly and time-intensive. A new programming paradigm, object-oriented programming, is uniquely suited for the development of such a software system. A knowledge base and fault tree evaluation algorithm, based on previous experience with PATREC-L, have been implemented using object-oriented techniques, resulting in a reliability assessment environment that is easy to develop, modify, and extend

  4. Two Trees: Migrating Fault Trees to Decision Trees for Real Time Fault Detection on International Space Station

    Science.gov (United States)

    Lee, Charles; Alena, Richard L.; Robinson, Peter

    2004-01-01

    We started from ISS fault trees example to migrate to decision trees, presented a method to convert fault trees to decision trees. The method shows that the visualizations of root cause of fault are easier and the tree manipulating becomes more programmatic via available decision tree programs. The visualization of decision trees for the diagnostic shows a format of straight forward and easy understands. For ISS real time fault diagnostic, the status of the systems could be shown by mining the signals through the trees and see where it stops at. The other advantage to use decision trees is that the trees can learn the fault patterns and predict the future fault from the historic data. The learning is not only on the static data sets but also can be online, through accumulating the real time data sets, the decision trees can gain and store faults patterns in the trees and recognize them when they come.

  5. Computer aided fault tree synthesis

    International Nuclear Information System (INIS)

    Poucet, A.

    1983-01-01

    Nuclear as well as non-nuclear organisations are showing during the past few years a growing interest in the field of reliability analysis. This urges for the development of powerful, state of the art methods and computer codes for performing such analysis on complex systems. In this report an interactive, computer aided approach is discussed, based on the well known fault tree technique. The time consuming and difficut task of manually constructing a system model (one or more fault trees) is replaced by an efficient interactive procedure in which the flexibility and the learning process inherent to the manual approach are combined with the accuracy in the modelling and the speed of the fully automatical approach. The method presented is based upon the use of a library containing component models. The possibility of setting up a standard library of models of general use and the link with a data collection system are discussed. The method has been implemented in the CAFTS-SALP software package which is described shortly in the report

  6. Modular representation and analysis of fault trees

    Energy Technology Data Exchange (ETDEWEB)

    Olmos, J; Wolf, L [Massachusetts Inst. of Tech., Cambridge (USA). Dept. of Nuclear Engineering

    1978-08-01

    An analytical method to describe fault tree diagrams in terms of their modular compositions is developed. Fault tree structures are characterized by recursively relating the top tree event to all its basic component inputs through a set of equations defining each of the modulus for the fault tree. It is shown that such a modular description is an extremely valuable tool for making a quantitative analysis of fault trees. The modularization methodology has been implemented into the PL-MOD computer code, written in PL/1 language, which is capable of modularizing fault trees containing replicated components and replicated modular gates. PL-MOD in addition can handle mutually exclusive inputs and explicit higher order symmetric (k-out-of-n) gates. The step-by-step modularization of fault trees performed by PL-MOD is demonstrated and it is shown how this procedure is only made possible through an extensive use of the list processing tools available in PL/1. A number of nuclear reactor safety system fault trees were analyzed. PL-MOD performed the modularization and evaluation of the modular occurrence probabilities and Vesely-Fussell importance measures for these systems very efficiently. In particular its execution time for the modularization of a PWR High Pressure Injection System reduced fault tree was 25 times faster than that necessary to generate its equivalent minimal cut-set description using MOCUS, a code considered to be fast by present standards.

  7. Naive Fault Tree : formulation of the approach

    NARCIS (Netherlands)

    Rajabalinejad, M

    2017-01-01

    Naive Fault Tree (NFT) accepts a single value or a range of values for each basic event and returns values for the top event. This accommodates the need of commonly used Fault Trees (FT) for precise data making them prone to data concerns and limiting their area of application. This paper extends

  8. Object-oriented communications

    International Nuclear Information System (INIS)

    Chapman, L.J.

    1989-01-01

    OOC is a high-level communications protocol based on the object-oriented paradigm. OOC's syntax, semantics, and pragmatics balance simplicity and expressivity for controls environments. While natural languages are too complex, computer protocols are often insufficiently expressive. An object-oriented communications philosophy provides a base for building the necessary high-level communications primitives like I don't understand and the current value of X is K. OOC is sufficiently flexible to express data acquisition, control requests, alarm messages, and error messages in a straightforward generic way. It can be used in networks, for inter-task communication, and even for intra-task communication

  9. Modular techniques for dynamic fault-tree analysis

    Science.gov (United States)

    Patterson-Hine, F. A.; Dugan, Joanne B.

    1992-01-01

    It is noted that current approaches used to assess the dependability of complex systems such as Space Station Freedom and the Air Traffic Control System are incapable of handling the size and complexity of these highly integrated designs. A novel technique for modeling such systems which is built upon current techniques in Markov theory and combinatorial analysis is described. It enables the development of a hierarchical representation of system behavior which is more flexible than either technique alone. A solution strategy which is based on an object-oriented approach to model representation and evaluation is discussed. The technique is virtually transparent to the user since the fault tree models can be built graphically and the objects defined automatically. The tree modularization procedure allows the two model types, Markov and combinatoric, to coexist and does not require that the entire fault tree be translated to a Markov chain for evaluation. This effectively reduces the size of the Markov chain required and enables solutions with less truncation, making analysis of longer mission times possible. Using the fault-tolerant parallel processor as an example, a model is built and solved for a specific mission scenario and the solution approach is illustrated in detail.

  10. Fault tree analysis for vital area identification

    International Nuclear Information System (INIS)

    Varnado, G.B.; Ortiz, N.R.

    1978-01-01

    This paper discusses the use of fault tree analysis to identify those areas of nuclear fuel cycle facilities which must be protected to prevent acts of sabotage that could lead to sifnificant release of radioactive material. By proper manipulation of the fault trees for a plant, an analyst can identify vital areas in a manner consistent with regulatory definitions. This paper discusses the general procedures used in the analysis of any nuclear facility. In addition, a structured, generic approach to the development of the fault trees for nuclear power reactors is presented along with selected results of the application of the generic approach to several plants

  11. Users' manual for the FTDRAW (Fault Tree Draw) code

    International Nuclear Information System (INIS)

    Oikawa, Tetsukuni; Hikawa, Michihiro; Tanabe, Syuichi; Nakamura, Norihiro

    1985-02-01

    This report provides the information needed to use the FTDRAW (Fault Tree Draw) code, which is designed for drawing a fault tree. The FTDRAW code has several optional functions, such as the overview of a fault tree output, fault tree output in English description, fault tree output in Japanese description and summary tree output. Inputs for the FTDRAW code are component failure rate information and gate information which are filed out by a execution of the FTA-J (Fault Tree Analysis-JAERI) code system and option control data. Using the FTDRAW code, we can get drawings of fault trees which is easy to see, efficiently. (author)

  12. Breaking the fault tree circular logic

    International Nuclear Information System (INIS)

    Lankin, M.

    2000-01-01

    Event tree - fault tree approach to model failures of nuclear plants as well as of other complex facilities is noticeably dominant now. This approach implies modeling an object in form of unidirectional logical graph - tree, i.e. graph without circular logic. However, genuine nuclear plants intrinsically demonstrate quite a few logical loops (circular logic), especially where electrical systems are involved. This paper shows the incorrectness of existing practice of circular logic breaking by elimination of part of logical dependencies and puts forward a formal algorithm, which enables the analyst to correctly model the failure of complex object, which involves logical dependencies between system and components, in form of fault tree. (author)

  13. Posbist fault tree analysis of coherent systems

    International Nuclear Information System (INIS)

    Huang, H.-Z.; Tong Xin; Zuo, Ming J.

    2004-01-01

    When the failure probability of a system is extremely small or necessary statistical data from the system is scarce, it is very difficult or impossible to evaluate its reliability and safety with conventional fault tree analysis (FTA) techniques. New techniques are needed to predict and diagnose such a system's failures and evaluate its reliability and safety. In this paper, we first provide a concise overview of FTA. Then, based on the posbist reliability theory, event failure behavior is characterized in the context of possibility measures and the structure function of the posbist fault tree of a coherent system is defined. In addition, we define the AND operator and the OR operator based on the minimal cut of a posbist fault tree. Finally, a model of posbist fault tree analysis (posbist FTA) of coherent systems is presented. The use of the model for quantitative analysis is demonstrated with a real-life safety system

  14. Cafts: computer aided fault tree analysis

    International Nuclear Information System (INIS)

    Poucet, A.

    1985-01-01

    The fault tree technique has become a standard tool for the analysis of safety and reliability of complex system. In spite of the costs, which may be high for a complete and detailed analysis of a complex plant, the fault tree technique is popular and its benefits are fully recognized. Due to this applications of these codes have mostly been restricted to simple academic examples and rarely concern complex, real world systems. In this paper an interactive approach to fault tree construction is presented. The aim is not to replace the analyst, but to offer him an intelligent tool which can assist him in modeling complex systems. Using the CAFTS-method, the analyst interactively constructs a fault tree in two phases: (1) In a first phase he generates an overall failure logic structure of the system; the macrofault tree. In this phase, CAFTS features an expert system approach to assist the analyst. It makes use of a knowledge base containing generic rules on the behavior of subsystems and components; (2) In a second phase the macrofault tree is further refined and transformed in a fully detailed and quantified fault tree. In this phase a library of plant-specific component failure models is used

  15. Static Typing for Object-Oriented Programming

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    1994-01-01

    We develop a theory of statically typed object-oriented languages. It represents classes as labeled, regular trees, types as finit sets of classes , and sub-classing as a partial order on trees. We show that our sub-classing order strictly generalizes inheritance, and that a novel genericity mech...

  16. Fault tree analysis of a research reactor

    International Nuclear Information System (INIS)

    Hall, J.A.; O'Dacre, D.F.; Chenier, R.J.; Arbique, G.M.

    1986-08-01

    Fault Tree Analysis Techniques have been used to assess the safety system of the ZED-2 Research Reactor at the Chalk River Nuclear Laboratories. This turned out to be a strong test of the techniques involved. The resulting fault tree was large and because of inter-links in the system structure the tree was not modularized. In addition, comprehensive documentation was required. After a brief overview of the reactor and the analysis, this paper concentrates on the computer tools that made the job work. Two types of tools were needed; text editing and forms management capability for large volumes of component and system data, and the fault tree codes themselves. The solutions (and failures) are discussed along with the tools we are already developing for the next analysis

  17. Reset Tree-Based Optical Fault Detection

    Directory of Open Access Journals (Sweden)

    Howon Kim

    2013-05-01

    Full Text Available In this paper, we present a new reset tree-based scheme to protect cryptographic hardware against optical fault injection attacks. As one of the most powerful invasive attacks on cryptographic hardware, optical fault attacks cause semiconductors to misbehave by injecting high-energy light into a decapped integrated circuit. The contaminated result from the affected chip is then used to reveal secret information, such as a key, from the cryptographic hardware. Since the advent of such attacks, various countermeasures have been proposed. Although most of these countermeasures are strong, there is still the possibility of attack. In this paper, we present a novel optical fault detection scheme that utilizes the buffers on a circuit’s reset signal tree as a fault detection sensor. To evaluate our proposal, we model radiation-induced currents into circuit components and perform a SPICE simulation. The proposed scheme is expected to be used as a supplemental security tool.

  18. Lognormal Approximations of Fault Tree Uncertainty Distributions.

    Science.gov (United States)

    El-Shanawany, Ashraf Ben; Ardron, Keith H; Walker, Simon P

    2018-01-26

    Fault trees are used in reliability modeling to create logical models of fault combinations that can lead to undesirable events. The output of a fault tree analysis (the top event probability) is expressed in terms of the failure probabilities of basic events that are input to the model. Typically, the basic event probabilities are not known exactly, but are modeled as probability distributions: therefore, the top event probability is also represented as an uncertainty distribution. Monte Carlo methods are generally used for evaluating the uncertainty distribution, but such calculations are computationally intensive and do not readily reveal the dominant contributors to the uncertainty. In this article, a closed-form approximation for the fault tree top event uncertainty distribution is developed, which is applicable when the uncertainties in the basic events of the model are lognormally distributed. The results of the approximate method are compared with results from two sampling-based methods: namely, the Monte Carlo method and the Wilks method based on order statistics. It is shown that the closed-form expression can provide a reasonable approximation to results obtained by Monte Carlo sampling, without incurring the computational expense. The Wilks method is found to be a useful means of providing an upper bound for the percentiles of the uncertainty distribution while being computationally inexpensive compared with full Monte Carlo sampling. The lognormal approximation method and Wilks's method appear attractive, practical alternatives for the evaluation of uncertainty in the output of fault trees and similar multilinear models. © 2018 Society for Risk Analysis.

  19. Commercial application of fault tree analysis

    International Nuclear Information System (INIS)

    Crosetti, P.A.; Bruce, R.A.

    1970-01-01

    The potential for general application of Fault Tree Analysis to commercial products appears attractive based not only on the successful extension from the aerospace safety technology to the nuclear reactor reliability and availability technology, but also because combinatorial hazards are common to commercial operations and therefore lend themselves readily to evaluation by Fault Tree Analysis. It appears reasonable to conclude that the technique has application within the commercial industrial community where the occurrence of a specified consequence or final event would be of sufficient concern to management to justify such a rigorous analysis as an aid to decision making. (U.S.)

  20. Guideliness for system modeling: fault tree [analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yoon Hwan; Yang, Joon Eon; Kang, Dae Il; Hwang, Mee Jeong

    2004-07-01

    This document, the guidelines for system modeling related to Fault Tree Analysis(FTA), is intended to provide the guidelines with the analyzer to construct the fault trees in the level of the capability category II of ASME PRA standard. Especially, they are to provide the essential and basic guidelines and the related contents to be used in support of revising the Ulchin 3 and 4 PSA model for risk monitor within the capability category II of ASME PRA standard. Normally the main objective of system analysis is to assess the reliability of system modeled by Event Tree Analysis (ETA). A variety of analytical techniques can be used for the system analysis, however, FTA method is used in this procedures guide. FTA is the method used for representing the failure logic of plant systems deductively using AND, OR or NOT gates. The fault tree should reflect all possible failure modes that may contribute to the system unavailability. This should include contributions due to the mechanical failures of the components, Common Cause Failures (CCFs), human errors and outages for testing and maintenance. This document identifies and describes the definitions and the general procedures of FTA and the essential and basic guidelines for reving the fault trees. Accordingly, the guidelines for FTA will be capable to guide the FTA to the level of the capability category II of ASME PRA standard.

  1. Guideliness for system modeling: fault tree [analysis

    International Nuclear Information System (INIS)

    Lee, Yoon Hwan; Yang, Joon Eon; Kang, Dae Il; Hwang, Mee Jeong

    2004-07-01

    This document, the guidelines for system modeling related to Fault Tree Analysis(FTA), is intended to provide the guidelines with the analyzer to construct the fault trees in the level of the capability category II of ASME PRA standard. Especially, they are to provide the essential and basic guidelines and the related contents to be used in support of revising the Ulchin 3 and 4 PSA model for risk monitor within the capability category II of ASME PRA standard. Normally the main objective of system analysis is to assess the reliability of system modeled by Event Tree Analysis (ETA). A variety of analytical techniques can be used for the system analysis, however, FTA method is used in this procedures guide. FTA is the method used for representing the failure logic of plant systems deductively using AND, OR or NOT gates. The fault tree should reflect all possible failure modes that may contribute to the system unavailability. This should include contributions due to the mechanical failures of the components, Common Cause Failures (CCFs), human errors and outages for testing and maintenance. This document identifies and describes the definitions and the general procedures of FTA and the essential and basic guidelines for reving the fault trees. Accordingly, the guidelines for FTA will be capable to guide the FTA to the level of the capability category II of ASME PRA standard

  2. Computer-aided Fault Tree Analysis

    International Nuclear Information System (INIS)

    Willie, R.R.

    1978-08-01

    A computer-oriented methodology for deriving minimal cut and path set families associated with arbitrary fault trees is discussed first. Then the use of the Fault Tree Analysis Program (FTAP), an extensive FORTRAN computer package that implements the methodology is described. An input fault tree to FTAP may specify the system state as any logical function of subsystem or component state variables or complements of these variables. When fault tree logical relations involve complements of state variables, the analyst may instruct FTAP to produce a family of prime implicants, a generalization of the minimal cut set concept. FTAP can also identify certain subsystems associated with the tree as system modules and provide a collection of minimal cut set families that essentially expresses the state of the system as a function of these module state variables. Another FTAP feature allows a subfamily to be obtained when the family of minimal cut sets or prime implicants is too large to be found in its entirety; this subfamily consists only of sets that are interesting to the analyst in a special sense

  3. Fault trees for diagnosis of system fault conditions

    International Nuclear Information System (INIS)

    Lambert, H.E.; Yadigaroglu, G.

    1977-01-01

    Methods for generating repair checklists on the basis of fault tree logic and probabilistic importance are presented. A one-step-ahead optimization procedure, based on the concept of component criticality, minimizing the expected time to diagnose system failure is outlined. Options available to the operator of a nuclear power plant when system fault conditions occur are addressed. A low-pressure emergency core cooling injection system, a standby safeguard system of a pressurized water reactor power plant, is chosen as an example illustrating the methods presented

  4. Fault tree analysis for vital area identification

    International Nuclear Information System (INIS)

    Varnado, G.B.; Ortiz, N.R.

    1978-01-01

    The use of fault tree analysis techniques to systematically identify (1) the sabotage events which can lead to release of significant quantities of radioactive materials, (2) the areas of the nuclear power plant in which the sabotage events can be accomplished, and (3) the areas of the plant which must be protected to assure that release does not occur are discussed

  5. Fault tree analysis for urban flooding

    NARCIS (Netherlands)

    Ten Veldhuis, J.A.E.; Clemens, F.H.L.R.; Van Gelder, P.H.A.J.M.

    2008-01-01

    Traditional methods to evaluate flood risk mostly focus on storm events as the main cause of flooding. Fault tree analysis is a technique that is able to model all potential causes of flooding and to quantify both the overall probability of flooding and the contributions of all causes of flooding to

  6. Fault tree analysis: concepts and techniques

    International Nuclear Information System (INIS)

    Fussell, J.B.

    1976-01-01

    Concepts and techniques of fault tree analysis have been developed over the past decade and now predictions from this type analysis are important considerations in the design of many systems such as aircraft, ships and their electronic systems, missiles, and nuclear reactor systems. Routine, hardware-oriented fault tree construction can be automated; however, considerable effort is needed in this area to get the methodology into production status. When this status is achieved, the entire analysis of hardware systems will be automated except for the system definition step. Automated analysis is not undesirable; to the contrary, when verified on adequately complex systems, automated analysis could well become a routine analysis. It could also provide an excellent start for a more in-depth fault tree analysis that includes environmental effects, common mode failure, and human errors. The automated analysis is extremely fast and frees the analyst from the routine hardware-oriented fault tree construction, as well as eliminates logic errors and errors of oversight in this part of the analysis. Automated analysis then affords the analyst a powerful tool to allow his prime efforts to be devoted to unearthing more subtle aspects of the modes of failure of the system

  7. Rare event simulation for dynamic fault trees

    NARCIS (Netherlands)

    Ruijters, Enno Jozef Johannes; Reijsbergen, D.P.; de Boer, Pieter-Tjerk; Stoelinga, Mariëlle Ida Antoinette

    2017-01-01

    Fault trees (FT) are a popular industrial method for reliability engineering, for which Monte Carlo simulation is an important technique to estimate common dependability metrics, such as the system reliability and availability. A severe drawback of Monte Carlo simulation is that the number of

  8. Rare Event Simulation for Dynamic Fault Trees

    NARCIS (Netherlands)

    Ruijters, Enno Jozef Johannes; Reijsbergen, D.P.; de Boer, Pieter-Tjerk; Stoelinga, Mariëlle Ida Antoinette; Tonetta, Stefano; Schoitsch, Erwin; Bitsch, Friedemann

    2017-01-01

    Fault trees (FT) are a popular industrial method for reliability engineering, for which Monte Carlo simulation is an important technique to estimate common dependability metrics, such as the system reliability and availability. A severe drawback of Monte Carlo simulation is that the number of

  9. An Algorithm for Fault-Tree Construction

    DEFF Research Database (Denmark)

    Taylor, J. R.

    1982-01-01

    An algorithm for performing certain parts of the fault tree construction process is described. Its input is a flow sheet of the plant, a piping and instrumentation diagram, or a wiring diagram of the circuits, to be analysed, together with a standard library of component functional and failure...

  10. Workflow Fault Tree Generation Through Model Checking

    DEFF Research Database (Denmark)

    Herbert, Luke Thomas; Sharp, Robin

    2014-01-01

    We present a framework for the automated generation of fault trees from models of realworld process workflows, expressed in a formalised subset of the popular Business Process Modelling and Notation (BPMN) language. To capture uncertainty and unreliability in workflows, we extend this formalism...

  11. Failure diagnosis and fault tree analysis

    International Nuclear Information System (INIS)

    Weber, G.

    1982-07-01

    In this report a methodology of failure diagnosis for complex systems is presented. Systems which can be represented by fault trees are considered. This methodology is based on switching algebra, failure diagnosis of digital circuits and fault tree analysis. Relations between these disciplines are shown. These relations are due to Boolean algebra and Boolean functions used throughout. It will be shown on this basis that techniques of failure diagnosis and fault tree analysis are useful to solve the following problems: 1. describe an efficient search of all failed components if the system is failed. 2. Describe an efficient search of all states which are close to a system failure if the system is still operating. The first technique will improve the availability, the second the reliability and safety. For these problems, the relation to methods of failure diagnosis for combinational circuits is required. Moreover, the techniques are demonstrated for a number of systems which can be represented by fault trees. (orig./RW) [de

  12. KCUT, code to generate minimal cut sets for fault trees

    International Nuclear Information System (INIS)

    Han, Sang Hoon

    2008-01-01

    1 - Description of program or function: KCUT is a software to generate minimal cut sets for fault trees. 2 - Methods: Expand a fault tree into cut sets and delete non minimal cut sets. 3 - Restrictions on the complexity of the problem: Size and complexity of the fault tree

  13. Fuzzy Uncertainty Evaluation for Fault Tree Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ki Beom; Shim, Hyung Jin [Seoul National University, Seoul (Korea, Republic of); Jae, Moo Sung [Hanyang University, Seoul (Korea, Republic of)

    2015-05-15

    This traditional probabilistic approach can calculate relatively accurate results. However it requires a long time because of repetitive computation due to the MC method. In addition, when informative data for statistical analysis are not sufficient or some events are mainly caused by human error, the probabilistic approach may not be possible because uncertainties of these events are difficult to be expressed by probabilistic distributions. In order to reduce the computation time and quantify uncertainties of top events when basic events whose uncertainties are difficult to be expressed by probabilistic distributions exist, the fuzzy uncertainty propagation based on fuzzy set theory can be applied. In this paper, we develop a fuzzy uncertainty propagation code and apply the fault tree of the core damage accident after the large loss of coolant accident (LLOCA). The fuzzy uncertainty propagation code is implemented and tested for the fault tree of the radiation release accident. We apply this code to the fault tree of the core damage accident after the LLOCA in three cases and compare the results with those computed by the probabilistic uncertainty propagation using the MC method. The results obtained by the fuzzy uncertainty propagation can be calculated in relatively short time, covering the results obtained by the probabilistic uncertainty propagation.

  14. New approaches to evaluating fault trees

    International Nuclear Information System (INIS)

    Sinnamon, R.M.; Andrews, J.D.

    1997-01-01

    Fault Tree Analysis is now a widely accepted technique to assess the probability and frequency of system failure in many industries. For complex systems an analysis may produce hundreds of thousands of combinations of events which can cause system failure (minimal cut sets). The determination of these cut sets can be a very time consuming process even on modern high speed digital computers. Computerised methods, such as bottom-up or top-down approaches, to conduct this analysis are now so well developed that further refinement is unlikely to result in vast reductions in computer time. It is felt that substantial improvement in computer utilisation will only result from a completely new approach. This paper describes the use of a Binary Decision Diagram for Fault Tree Analysis and some ways in which it can be efficiently implemented on a computer. In particular, attention is given to the production of a minimum form of the Binary Decision Diagram by considering the ordering that has to be given to the basic events of the fault tree

  15. Automated fault tree analysis: the GRAFTER system

    International Nuclear Information System (INIS)

    Sancaktar, S.; Sharp, D.R.

    1985-01-01

    An inherent part of probabilistic risk assessment (PRA) is the construction and analysis of detailed fault trees. For this purpose, a fault tree computer graphics code named GRAFTER has been developed. The code system centers around the GRAFTER code. This code is used interactively to construct, store, update and print fault trees of small or large sizes. The SIMON code is used to provide data for the basic event probabilities. ENCODE is used to process the GRAFTER files to prepare input for the WAMCUT code. WAMCUT is used to quantify the top event probability and to identify the cutsets. This code system has been extensively used in various PRA projects. It has resulted in reduced manpower costs, increased QA capability, ease of documentation and it has simplified sensitivity analyses. Because of its automated nature, it is also suitable for LIVING PRA Studies which require updating and modifications during the lifetime of the plant. Brief descriptions and capabilities of the GRAFTER, SIMON and ENCODE codes are provided; an application of the GRAFTER system is outlined; and conclusions and comments on the code system are given

  16. Object-Oriented Type Systems

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    a type system that generalizes and explains them. The theory is based on an idealized object-oriented language called BOPL (Basic Object Programming Language), containing common features of the above languages. A type system, type inference algorithm, and typings of inheritance and genericity......Object-Oriented Type Systems Jens Palsberg and Michael I. Schwartzbach Aarhus University, Denmark Type systems are required to ensure reliability and efficiency of software. For object-oriented languages, typing is an especially challenging problem because of inheritance, assignment, and late...... are provided for BOPL. Throughout, the results are related to the languages on which BOPL is based. This text offers advanced undergraduates and professional software developers a sound understanding of the key aspects of object-oriented type systems. All algorithms are implemented in a freely available...

  17. TREDRA, Minimal Cut Sets Fault Tree Plot Program

    International Nuclear Information System (INIS)

    Fussell, J.B.

    1983-01-01

    1 - Description of problem or function: TREDRA is a computer program for drafting report-quality fault trees. The input to TREDRA is similar to input for standard computer programs that find minimal cut sets from fault trees. Output includes fault tree plots containing all standard fault tree logic and event symbols, gate and event labels, and an output description for each event in the fault tree. TREDRA contains the following features: a variety of program options that allow flexibility in the program output; capability for automatic pagination of the output fault tree, when necessary; input groups which allow labeling of gates, events, and their output descriptions; a symbol library which includes standard fault tree symbols plus several less frequently used symbols; user control of character size and overall plot size; and extensive input error checking and diagnostic oriented output. 2 - Method of solution: Fault trees are generated by user-supplied control parameters and a coded description of the fault tree structure consisting of the name of each gate, the gate type, the number of inputs to the gate, and the names of these inputs. 3 - Restrictions on the complexity of the problem: TREDRA can produce fault trees with a minimum of 3 and a maximum of 56 levels. The width of each level may range from 3 to 37. A total of 50 transfers is allowed during pagination

  18. Software development to assist in fault tree construction

    International Nuclear Information System (INIS)

    Simic, Z.; Mikulicic, V.

    1992-01-01

    This paper reviews and classifies fault tree construction methods developed for system safety and reliability. We have outlined two generally different approaches: automatic and interactive fault tree construction. Automatic fault tree approach is no jet enough developed to covering various uses in practice. Interactive approach is intending to be support to the analyst (not vice verse like in automatic approach). The aim is not so high as automatic one but it is accessible. We have favored interactive approach as well because to our opinion the process of fault tree construction is very important for better system understanding. We have described our example of interactive fault tree construction approach. Computer code GIFFT (Graphical Interactive Fault Tree Tool) is in phase of intensive testing and final developing. (author) [hr

  19. Efficient fault tree handling - the Asea-Atom approach

    International Nuclear Information System (INIS)

    Ericsson, G.; Knochenhauer, M.; Mills, R.

    1985-01-01

    In recent years there has been a trend in Swedish Probabilistic Safety Analysis (PSA) work towards coordination of the tools and methods used, in order to facilitate exchange of information and review. Thus, standardized methods for fault tree drawing and basic event coding have been developed as well as a number of computer codes for fault tree handling. The computer code used by Asea-Atom is called SUPER-TREE. As indicated by the name, the key feature is the concept of one super tree containing all the information necessary in the fault tree analysis, i.e. system fault trees, sequence fault trees and component data base. The code has proved to allow great flexibility in the choice of level of detail in the analysis

  20. Analytical propagation of uncertainties through fault trees

    International Nuclear Information System (INIS)

    Hauptmanns, Ulrich

    2002-01-01

    A method is presented which enables one to propagate uncertainties described by uniform probability density functions through fault trees. The approach is analytical. It is based on calculating the expected value and the variance of the top event probability. These two parameters are then equated with the corresponding ones of a beta-distribution. An example calculation comparing the analytically calculated beta-pdf (probability density function) with the top event pdf obtained using the Monte-Carlo method shows excellent agreement at a much lower expense of computing time

  1. On the numerical solution of fault trees

    International Nuclear Information System (INIS)

    Demichela, M.; Piccinini, N.; Ciarambino, I.; Contini, S.

    2003-01-01

    In this paper an account will be given of the numerical solution of the logic trees directly extracted from the Recursive Operability Analysis. Particular attention will be devoted to the use of the NOT and INH logic gates for correct logical representation of Fault Trees prior to their quantitative resolution. The NOT gate is needed for correct logical representation of events when both non-intervention and correct intervention of a protective system may lead to a Top Event. The INH gate must be used to correctly represent the time link between two events that are both necessary, but must occur in sequence. Some numerical examples will be employed to show both the correct identification of the events entering the INH gates and how use of the AND gate instead of the INH gate leads to overestimation of the probability of occurrence of a Top Event

  2. Computer aided fault tree construction for electrical systems

    International Nuclear Information System (INIS)

    Fussell, J.B.

    1975-01-01

    A technique is presented for automated construction of the Boolean failure logic diagram, called the fault tree, for electrical systems. The method is a technique for synthesizing a fault tree from system-independent component characteristics. Terminology is defined and heuristic examples are given for all phases of the model. The computer constructed fault trees are in conventional format, use conventional symbols, and are deductively constructed from the main failure of interest to the individual component failures. The synthesis technique is generally applicable to automated fault tree construction for other types of systems

  3. Algorithmic fault tree construction by component-based system modeling

    International Nuclear Information System (INIS)

    Majdara, Aref; Wakabayashi, Toshio

    2008-01-01

    Computer-aided fault tree generation can be easier, faster and less vulnerable to errors than the conventional manual fault tree construction. In this paper, a new approach for algorithmic fault tree generation is presented. The method mainly consists of a component-based system modeling procedure an a trace-back algorithm for fault tree synthesis. Components, as the building blocks of systems, are modeled using function tables and state transition tables. The proposed method can be used for a wide range of systems with various kinds of components, if an inclusive component database is developed. (author)

  4. Object-Oriented Type Systems

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    binding. Existing languages employ different type systems, and it can be difficult to compare, evaluate and improve them, since there is currently no uniform theory for such languages. This book provides such a theory. The authors review the type systems of Simula, Smalltalk, C++ and Eiffel and present......Object-Oriented Type Systems Jens Palsberg and Michael I. Schwartzbach Aarhus University, Denmark Type systems are required to ensure reliability and efficiency of software. For object-oriented languages, typing is an especially challenging problem because of inheritance, assignment, and late...... a type system that generalizes and explains them. The theory is based on an idealized object-oriented language called BOPL (Basic Object Programming Language), containing common features of the above languages. A type system, type inference algorithm, and typings of inheritance and genericity...

  5. Experimental Object-Oriented Modelling

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius

    through, e.g., technical prototyping and active user involvement. We introduce and examine “experimental object-oriented modelling” as the intersection of these practices. The contributions of this thesis are expected to be within three perspectives on models and modelling in experimental system...... development: Grounding We develop an empirically based conceptualization of modelling and use of models in system development projects characterized by a high degree of uncertainty in requirements and point to implications for tools and techniques for modelling in such a setting. Techniques We introduce......This thesis examines object-oriented modelling in experimental system development. Object-oriented modelling aims at representing concepts and phenomena of a problem domain in terms of classes and objects. Experimental system development seeks active experimentation in a system development project...

  6. Fault tree analysis with multistate components

    International Nuclear Information System (INIS)

    Caldarola, L.

    1979-02-01

    A general analytical theory has been developed which allows one to calculate the occurence probability of the top event of a fault tree with multistate (more than states) components. It is shown that, in order to correctly describe a system with multistate components, a special type of Boolean algebra is required. This is called 'Boolean algebra with restrictions on varibales' and its basic rules are the same as those of the traditional Boolean algebra with some additional restrictions on the variables. These restrictions are extensively discussed in the paper. Important features of the method are the identification of the complete base and of the smallest irredundant base of a Boolean function which does not necessarily need to be coherent. It is shown that the identification of the complete base of a Boolean function requires the application of some algorithms which are not used in today's computer programmes for fault tree analysis. The problem of statistical dependence among primary components is discussed. The paper includes a small demonstrative example to illustrate the method. The example includes also statistical dependent components. (orig.) [de

  7. Fault tree analysis for reactor systems

    International Nuclear Information System (INIS)

    Crosetti, P.A.

    1971-01-01

    Reliability analysis is playing an increasingly important role in quantitative assessment of system performance for assuring nuclear safety, improving plant performance and plant life, and reducing plant operating costs. The complexity of today's nuclear plants warrant the use of techniques which will provide a comprehensive evaluation of systems in their total context. In particular, fault tree analysis with probability evaluation can play a key role in assuring nuclear safety, in improving plant performance and plant life, and in reducing plant operating costs. The technique provides an all inclusive, versatile mathematical tool for analyzing complex systems. Its application can include a complete plant as well as any of the systems and subsystems. Fault tree analysis provides an objective basis for analyzing system design, performing trade-off studies, analyzing common mode failures, demonstrating compliance with AEC requirements, and justifying system changes or additions. The logic of the approach makes it readily understandable and, therefore, it serves as an effective visibility tool for both engineering and management. (U.S.)

  8. Fault tree analysis of KNICS RPS software

    International Nuclear Information System (INIS)

    Park, Gee Yong; Kwon, Kee Choon; Koh, Kwang Yong; Jee, Eun Kyoung; Seong, Poong Hyun; Lee, Dae Hyung

    2008-01-01

    This paper describes the application of a software Fault Tree Analysis (FTA) as one of the analysis techniques for a Software Safety Analysis (SSA) at the design phase and its analysis results for the safety-critical software of a digital reactor protection system, which is called the KNICS RPS, being developed in the KNICS (Korea Nuclear Instrumentation and Control Systems) project. The software modules in the design description were represented by Function Blocks (FBs), and the software FTA was performed based on the well-defined fault tree templates for the FBs. The SSA, which is part of the verification and validation (V and V) activities, was activated at each phase of the software lifecycle for the KNICS RPS. At the design phase, the software HAZOP (Hazard and Operability) and the software FTA were employed in the SSA in such a way that the software HAZOP was performed first and then the software FTA was applied. The software FTA was applied to some critical modules selected from the software HAZOP analysis

  9. Object-Oriented Type Inference

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    1991-01-01

    We present a new approach to inferring types in untyped object-oriented programs with inheritance, assignments, and late binding. It guarantees that all messages are understood, annotates the program with type information, allows polymorphic methods, and can be used as the basis of an op...

  10. Object Oriented Programming in Director

    Directory of Open Access Journals (Sweden)

    Marian DARDALA

    2006-01-01

    Full Text Available Director is one of the most popular authoring software. As software for developing multimedia applications, Director is an object oriented programming environment. A very important issue to develop multimedia applications is the designing of their own classes. This paper presents the particular aspects concerning the available facilities offered by Lingo to design classes and to generate objects.

  11. Study of fault diagnosis software design for complex system based on fault tree

    International Nuclear Information System (INIS)

    Yuan Run; Li Yazhou; Wang Jianye; Hu Liqin; Wang Jiaqun; Wu Yican

    2012-01-01

    Complex systems always have high-level reliability and safety requirements, and same does their diagnosis work. As a great deal of fault tree models have been acquired during the design and operation phases, a fault diagnosis method which combines fault tree analysis with knowledge-based technology has been proposed. The prototype of fault diagnosis software has been realized and applied to mobile LIDAR system. (authors)

  12. Methods of fault tree analysis and their limits

    International Nuclear Information System (INIS)

    Weber, G.G.

    1984-12-01

    Some recent methodological developments of fault tree analysis are discussed and limits of fault tree analysis and a criterion for admissibility of structure functions are given. It is shown that there are interesting relations to switching theory and to stochastic processes. (orig./HP) [de

  13. System assessment using modular logic fault tree methodology

    International Nuclear Information System (INIS)

    Troncoso Fleitas, M.

    1996-01-01

    In the process of a Probabilistic Safety analysis (PSA) study a large number of fault trees are generated by different specialist. Modular Logic Fault Tree Methodology pave the way the way to systematize the procedures and to unify the criteria in the process of systems modulation. An example of of the application of this methodology is shown

  14. Power system reliability analysis using fault trees

    International Nuclear Information System (INIS)

    Volkanovski, A.; Cepin, M.; Mavko, B.

    2006-01-01

    The power system reliability analysis method is developed from the aspect of reliable delivery of electrical energy to customers. The method is developed based on the fault tree analysis, which is widely applied in the Probabilistic Safety Assessment (PSA). The method is adapted for the power system reliability analysis. The method is developed in a way that only the basic reliability parameters of the analysed power system are necessary as an input for the calculation of reliability indices of the system. The modeling and analysis was performed on an example power system consisting of eight substations. The results include the level of reliability of current power system configuration, the combinations of component failures resulting in a failed power delivery to loads, and the importance factors for components and subsystems. (author)

  15. Mastering object-oriented Python

    CERN Document Server

    Lott, Steven F

    2014-01-01

    This book follows a standard tutorial approach with approximately 750 code samples spread through the 19 chapters. This amounts to over 5,900 lines of code that illustrate each concept.This book is aimed at programmers who have already learned the basics of object-oriented Python and need to write more sophisticated, flexible code that integrates seamlessly with the rest of Python. This book assumes a computer science background, with experience of common Python design patterns.

  16. [The Application of the Fault Tree Analysis Method in Medical Equipment Maintenance].

    Science.gov (United States)

    Liu, Hongbin

    2015-11-01

    In this paper, the traditional fault tree analysis method is presented, detailed instructions for its application characteristics in medical instrument maintenance is made. It is made significant changes when the traditional fault tree analysis method is introduced into the medical instrument maintenance: gave up the logic symbolic, logic analysis and calculation, gave up its complicated programs, and only keep its image and practical fault tree diagram, and the fault tree diagram there are also differences: the fault tree is no longer a logical tree but the thinking tree in troubleshooting, the definition of the fault tree's nodes is different, the composition of the fault tree's branches is also different.

  17. AFTC Code for Automatic Fault Tree Construction: Users Manual

    International Nuclear Information System (INIS)

    Gopika Vinod; Saraf, R.K.; Babar, A.K.

    1999-04-01

    Fault Trees perform a predominant role in reliability and safety analysis of system. Manual construction of fault tree is a very time consuming task and moreover, it won't give a formalized result, since it relies highly on analysts experience and heuristics. This necessitates a computerised fault tree construction, which is still attracting interest of reliability analysts. AFTC software is a user friendly software model for constructing fault trees based on decision tables. Software is equipped with libraries of decision tables for components commonly used in various Nuclear Power Plant (NPP) systems. User is expected to make a nodal diagram of the system, for which fault tree is to be constructed, from the flow sheets available. The text nodal diagram goes as the sole input defining the system flow chart. AFTC software is a rule based expert system which draws the fault tree from the system flow chart and component decision tables. AFTC software gives fault tree in both text and graphic format. Help is provided as how to enter system flow chart and component decision tables. The software is developed in 'C' language. Software is verified with simplified version of the fire water system of an Indian PHWR. Code conversion will be undertaken to create a window based version. (author)

  18. Advanced features of the fault tree solver FTREX

    International Nuclear Information System (INIS)

    Jung, Woo Sik; Han, Sang Hoon; Ha, Jae Joo

    2005-01-01

    This paper presents advanced features of a fault tree solver FTREX (Fault Tree Reliability Evaluation eXpert). Fault tree analysis is one of the most commonly used methods for the safety analysis of industrial systems especially for the probabilistic safety analysis (PSA) of nuclear power plants. Fault trees are solved by the classical Boolean algebra, conventional Binary Decision Diagram (BDD) algorithm, coherent BDD algorithm, and Bayesian networks. FTREX could optionally solve fault trees by the conventional BDD algorithm or the coherent BDD algorithm and could convert the fault trees into the form of the Bayesian networks. The algorithm based on the classical Boolean algebra solves a fault tree and generates MCSs. The conventional BDD algorithm generates a BDD structure of the top event and calculates the exact top event probability. The BDD structure is a factorized form of the prime implicants. The MCSs of the top event could be extracted by reducing the prime implicants in the BDD structure. The coherent BDD algorithm is developed to overcome the shortcomings of the conventional BDD algorithm such as the huge memory requirements and a long run time

  19. Analysis of large fault trees based on functional decomposition

    International Nuclear Information System (INIS)

    Contini, Sergio; Matuzas, Vaidas

    2011-01-01

    With the advent of the Binary Decision Diagrams (BDD) approach in fault tree analysis, a significant enhancement has been achieved with respect to previous approaches, both in terms of efficiency and accuracy of the overall outcome of the analysis. However, the exponential increase of the number of nodes with the complexity of the fault tree may prevent the construction of the BDD. In these cases, the only way to complete the analysis is to reduce the complexity of the BDD by applying the truncation technique, which nevertheless implies the problem of estimating the truncation error or upper and lower bounds of the top-event unavailability. This paper describes a new method to analyze large coherent fault trees which can be advantageously applied when the working memory is not sufficient to construct the BDD. It is based on the decomposition of the fault tree into simpler disjoint fault trees containing a lower number of variables. The analysis of each simple fault tree is performed by using all the computational resources. The results from the analysis of all simpler fault trees are re-combined to obtain the results for the original fault tree. Two decomposition methods are herewith described: the first aims at determining the minimal cut sets (MCS) and the upper and lower bounds of the top-event unavailability; the second can be applied to determine the exact value of the top-event unavailability. Potentialities, limitations and possible variations of these methods will be discussed with reference to the results of their application to some complex fault trees.

  20. Analysis of large fault trees based on functional decomposition

    Energy Technology Data Exchange (ETDEWEB)

    Contini, Sergio, E-mail: sergio.contini@jrc.i [European Commission, Joint Research Centre, Institute for the Protection and Security of the Citizen, 21020 Ispra (Italy); Matuzas, Vaidas [European Commission, Joint Research Centre, Institute for the Protection and Security of the Citizen, 21020 Ispra (Italy)

    2011-03-15

    With the advent of the Binary Decision Diagrams (BDD) approach in fault tree analysis, a significant enhancement has been achieved with respect to previous approaches, both in terms of efficiency and accuracy of the overall outcome of the analysis. However, the exponential increase of the number of nodes with the complexity of the fault tree may prevent the construction of the BDD. In these cases, the only way to complete the analysis is to reduce the complexity of the BDD by applying the truncation technique, which nevertheless implies the problem of estimating the truncation error or upper and lower bounds of the top-event unavailability. This paper describes a new method to analyze large coherent fault trees which can be advantageously applied when the working memory is not sufficient to construct the BDD. It is based on the decomposition of the fault tree into simpler disjoint fault trees containing a lower number of variables. The analysis of each simple fault tree is performed by using all the computational resources. The results from the analysis of all simpler fault trees are re-combined to obtain the results for the original fault tree. Two decomposition methods are herewith described: the first aims at determining the minimal cut sets (MCS) and the upper and lower bounds of the top-event unavailability; the second can be applied to determine the exact value of the top-event unavailability. Potentialities, limitations and possible variations of these methods will be discussed with reference to the results of their application to some complex fault trees.

  1. Objective - oriented financial analysis introduction

    Directory of Open Access Journals (Sweden)

    Dessislava Kostova – Pickett

    2018-02-01

    Full Text Available The practice of financial analysis has been immeasurably strengthened in recent years thanks to the ongoing evolution of computerized approaches in the form of spreadsheets and computer-based financial models of different types. These devices not only relieved the analyst's computing task, but also opened up a wide range of analyzes and research into alternative sensitivity, which so far has not been possible. The main potential for object-oriented financial analysis consists in enormously expanding the analyst's capabilities through an online knowledge and information interface that has not yet been achieved through existing methods and software packages.

  2. Object oriented JavaScript

    CERN Document Server

    Stefanov, Stoyan

    2013-01-01

    You will first be introduced to object-oriented programming, then to the basics of objects in JavaScript. This book takes a do-it-yourself approach when it comes to writing code, because the best way to really learn a programming language is by writing code. You are encouraged to type code into Firebug's console, see how it works and then tweak it and play around with it. There are practice questions at the end of each chapter to help you review what you have learned.For new to intermediate JavaScript developer who wants to prepare themselves for web development problems solved by smart JavaSc

  3. Utilization of fault tree analysis techniques in fire protection work

    International Nuclear Information System (INIS)

    Crass, E.R.

    1986-01-01

    This paper describes the development of a fault tree model for a typical pressurized water reactor (PWR), and the subsequent use of this model to perform a safe shutdown analysis and determine conformance with Section IIIG of 10 CFR 50, Appendix R. The paper describes the rationale for choosing this analytical tool, the development of the fault tree model, the analysis of the model using the PREP code, disposition of the results, and finally, application of the results to determine the need for plant modifications. It concludes with a review of the strengths and weaknesses of the use of Fault Tree Methodology for this application

  4. A compendium of computer codes in fault tree analysis

    International Nuclear Information System (INIS)

    Lydell, B.

    1981-03-01

    In the past ten years principles and methods for a unified system reliability and safety analysis have been developed. Fault tree techniques serve as a central feature of unified system analysis, and there exists a specific discipline within system reliability concerned with the theoretical aspects of fault tree evaluation. Ever since the fault tree concept was established, computer codes have been developed for qualitative and quantitative analyses. In particular the presentation of the kinetic tree theory and the PREP-KITT code package has influenced the present use of fault trees and the development of new computer codes. This report is a compilation of some of the better known fault tree codes in use in system reliability. Numerous codes are available and new codes are continuously being developed. The report is designed to address the specific characteristics of each code listed. A review of the theoretical aspects of fault tree evaluation is presented in an introductory chapter, the purpose of which is to give a framework for the validity of the different codes. (Auth.)

  5. Sequence Algebra, Sequence Decision Diagrams and Dynamic Fault Trees

    International Nuclear Information System (INIS)

    Rauzy, Antoine B.

    2011-01-01

    A large attention has been focused on the Dynamic Fault Trees in the past few years. By adding new gates to static (regular) Fault Trees, Dynamic Fault Trees aim to take into account dependencies among events. Merle et al. proposed recently an algebraic framework to give a formal interpretation to these gates. In this article, we extend Merle et al.'s work by adopting a slightly different perspective. We introduce Sequence Algebras that can be seen as Algebras of Basic Events, representing failures of non-repairable components. We show how to interpret Dynamic Fault Trees within this framework. Finally, we propose a new data structure to encode sets of sequences of Basic Events: Sequence Decision Diagrams. Sequence Decision Diagrams are very much inspired from Minato's Zero-Suppressed Binary Decision Diagrams. We show that all operations of Sequence Algebras can be performed on this data structure.

  6. Exploring object-oriented technologies

    CERN Multimedia

    2000-01-01

    Object oriented technologies are the corner stone of modern software development. A piece of software is today conceived, constructed and tested as a set of objects interacting with each other, rather than as a large sequential program. OO is present throughout the whole software life cycle allowing for maintainable code re-use, clean design and manageable complexity. OO is also the seed upon which other technologies are being built and deployed, such as distributed computing, component models, open interoperability, etc.This series of three seminars will provide a pragmatic overview on the main ideas behind OO software development and will explain the inner workings of the most outstanding technologies being built on OO, such as UML, CORBA, Component Models, Agent Oriented Computing, Business Objects, etc.

  7. Algorithms and programs for consequence diagram and fault tree construction

    International Nuclear Information System (INIS)

    Hollo, E.; Taylor, J.R.

    1976-12-01

    A presentation of algorithms and programs for consequence diagram and sequential fault tree construction that are intended for reliability and disturbance analysis of large systems. The system to be analyzed must be given as a block diagram formed by mini fault trees of individual system components. The programs were written in LISP programming language and run on a PDP8 computer with 8k words of storage. A description is given of the methods used and of the program construction and working. (author)

  8. Interim reliability evaluation program, Browns Ferry fault trees

    International Nuclear Information System (INIS)

    Stewart, M.E.

    1981-01-01

    An abbreviated fault tree method is used to evaluate and model Browns Ferry systems in the Interim Reliability Evaluation programs, simplifying the recording and displaying of events, yet maintaining the system of identifying faults. The level of investigation is not changed. The analytical thought process inherent in the conventional method is not compromised. But the abbreviated method takes less time, and the fault modes are much more visible

  9. A fault tree analysis strategy using binary decision diagrams

    International Nuclear Information System (INIS)

    Reay, Karen A.; Andrews, John D.

    2002-01-01

    The use of binary decision diagrams (BDDs) in fault tree analysis provides both an accurate and efficient means of analysing a system. There is a problem, however, with the conversion process of the fault tree to the BDD. The variable ordering scheme chosen for the construction of the BDD has a crucial effect on its resulting size and previous research has failed to identify any scheme that is capable of producing BDDs for all fault trees. This paper proposes an analysis strategy aimed at increasing the likelihood of obtaining a BDD for any given fault tree, by ensuring the associated calculations are as efficient as possible. The method implements simplification techniques, which are applied to the fault tree to obtain a set of 'minimal' subtrees, equivalent to the original fault tree structure. BDDs are constructed for each, using ordering schemes most suited to their particular characteristics. Quantitative analysis is performed simultaneously on the set of BDDs to obtain the top event probability, the system unconditional failure intensity and the criticality of the basic events

  10. Time-dependent methodology for fault tree evaluation

    International Nuclear Information System (INIS)

    Vesely, W.B.

    1976-01-01

    Any fault tree may be evaluated applying the method called the kinetic theory of fault trees. The basic feature of this method as presented here is in that any information on primary failure, type failure or peak failure is derived from three characteristics: probability of existence, failure intensity and failure density. The determination of the said three characteristics for a given phenomenon yields the remaining probabilistic information on the individual aspects of the failure and on their totality for the whole observed period. The probabilistic characteristics are determined by applying the analysis of phenomenon probability. The total time dependent information on the peak failure is obtained by using the type failures (critical paths) of the fault tree. By applying the said process the total time dependent information is obtained for every primary failure and type failure of the fault tree. In the application of the method of the kinetic theory of fault trees represented by the PREP and KITT programmes, the type failures are first obtained using the deterministic testing method or using the Monte Carlo simulation (PREP programme). The respective characteristics are then determined using the kinetic theory of fault trees (KITT programmes). (Oy)

  11. Microcomputer applications of, and modifications to, the modular fault trees

    International Nuclear Information System (INIS)

    Zimmerman, T.L.; Graves, N.L.; Payne, A.C. Jr.; Whitehead, D.W.

    1994-10-01

    The LaSalle Probabilistic Risk Assessment was the first major application of the modular logic fault trees after the IREP program. In the process of performing the analysis, many errors were discovered in the fault tree modules that led to difficulties in combining the modules to form the final system fault trees. These errors are corrected in the revised modules listed in this report. In addition, the application of the modules in terms of editing them and forming them into the system fault trees was inefficient. Originally, the editing had to be done line by line and no error checking was performed by the computer. This led to many typos and other logic errors in the construction of the modular fault tree files. Two programs were written to help alleviate this problem: (1) MODEDIT - This program allows an operator to retrieve a file for editing, edit the file for the plant specific application, perform some general error checking while the file is being modified, and store the file for later use, and (2) INDEX - This program checks that the modules that are supposed to form one fault tree all link up appropriately before the files are,loaded onto the mainframe computer. Lastly, the modules were not designed for relay type logic common in BWR designs but for solid state type logic. Some additional modules were defined for modeling relay logic, and an explanation and example of their use are included in this report

  12. A practical method for accurate quantification of large fault trees

    International Nuclear Information System (INIS)

    Choi, Jong Soo; Cho, Nam Zin

    2007-01-01

    This paper describes a practical method to accurately quantify top event probability and importance measures from incomplete minimal cut sets (MCS) of a large fault tree. The MCS-based fault tree method is extensively used in probabilistic safety assessments. Several sources of uncertainties exist in MCS-based fault tree analysis. The paper is focused on quantification of the following two sources of uncertainties: (1) the truncation neglecting low-probability cut sets and (2) the approximation in quantifying MCSs. The method proposed in this paper is based on a Monte Carlo simulation technique to estimate probability of the discarded MCSs and the sum of disjoint products (SDP) approach complemented by the correction factor approach (CFA). The method provides capability to accurately quantify the two uncertainties and estimate the top event probability and importance measures of large coherent fault trees. The proposed fault tree quantification method has been implemented in the CUTREE code package and is tested on the two example fault trees

  13. Testing Object-Oriented Software

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Madsen, Ole Lehrmann; Skov, Stefan H.

    The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto-types that......The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto......-types that are currently being developed into production versions. To assure a high quality in the product it was decided to carry out an activ-ity regarding issues in testing OO software. The purpose of this report is to discuss the issues of testing object-oriented software. It is often claimed that testing of OO...... software is radically different form testing traditional software developed using imperative/procedural programming. Other authors claim that there is no difference. In this report we will attempt to give an answer to these questions (or at least initiate a discussion)....

  14. Automatic fault tree generation in the EPR PSA project

    International Nuclear Information System (INIS)

    Villatte, N; Nonclercq, P.; Taupy, S.

    2012-01-01

    Tools (KB3 and Atelier EPS) have been developed at EDF to assist the analysts in building fault trees for PSA (Probabilistic Safety Assessment) and importing them into RiskSpectrum (RiskSpectrum is a Swedish code used at EDF for PSA). System modelling is performed using KB3 software with a knowledge base describing generic classes of components with their behaviour and failure modes. Using these classes of components, the analyst can describe (using a graphical system editor): a simplified system diagram from the mechanical system drawings and functional descriptions, the missions of the studied system (in a form of high level fault trees) and its different configurations for the missions. He can also add specific knowledge about the system. Then, the analyst chooses missions and configurations to specify and launch fault trees generations. From the system description, KB3 produces by backward-chaining on rules, detailed system fault trees. These fault trees are finally imported into RiskSpectrum (they are converted by Atelier EPS into a format readable by RiskSpectrum). KB3 and Atelier EPS have been used to create the majority of the fault trees for the EDF EPR Probabilistic Safety Analysis conducted from November 2009 to March 2010. 25 systems were modelled, and 127 fault trees were automatically generated in a rather short time by different analysts with the help of these tools. A feedback shows a lot of advantages to use KB3 and Atelier EPS: homogeneity and consistency between the different generated fault trees, traceability of modelling, control of modelling and last but not least: the automation of detailed fault tree creation relieves the human analyst of this tedious task so that he can focus his attention on more important tasks: modelling the failure of a function. This industrial application has also helped us gather an interesting feedback from the analysts that should help us improve the handling of the tools. We propose in this paper indeed some

  15. Accident Fault Trees for Defense Waste Processing Facility

    Energy Technology Data Exchange (ETDEWEB)

    Sarrack, A.G.

    1999-06-22

    The purpose of this report is to document fault tree analyses which have been completed for the Defense Waste Processing Facility (DWPF) safety analysis. Logic models for equipment failures and human error combinations that could lead to flammable gas explosions in various process tanks, or failure of critical support systems were developed for internal initiating events and for earthquakes. These fault trees provide frequency estimates for support systems failures and accidents that could lead to radioactive and hazardous chemical releases both on-site and off-site. Top event frequency results from these fault trees will be used in further APET analyses to calculate accident risk associated with DWPF facility operations. This report lists and explains important underlying assumptions, provides references for failure data sources, and briefly describes the fault tree method used. Specific commitments from DWPF to provide new procedural/administrative controls or system design changes are listed in the ''Facility Commitments'' section. The purpose of the ''Assumptions'' section is to clarify the basis for fault tree modeling, and is not necessarily a list of items required to be protected by Technical Safety Requirements (TSRs).

  16. Report on AECB consultative document C-70: The use of fault trees in licensing submissions

    International Nuclear Information System (INIS)

    1984-01-01

    The Atomic Energy Control Board (AECB) has issued Consultative Document C-70, 'The Use of Fault Trees in Licensing Submissions', for public comment. The Advisory Committee on Nuclear Safety (ACNS) has examined this document and ACNS members have met with AECB staff and representatives of the nuclear industry to discuss it. The ACNS presents its comments and recommendations in this report. The consultative document defines a fault tree as a hierarchically-structured graphical representation of system failures and their potential causes. The document then states certain basic characteristics or attributes which fault trees should possess, and certain conditions affecting the use of fault trees. It defines fault tree fundamentals, sets criteria for the application of fault trees to systems and defines ground rules for a fault tree format. Finally, in two appendices, it includes specific rules for fault tree symbols and fault tree description files for computer use. The appendices are referred to in the text as 'acceptable' standards or methods

  17. MAPLE-II. A program for plotting fault trees

    International Nuclear Information System (INIS)

    Poucet, A.; Van Den Muyzenberg, C.L.

    1987-01-01

    The MAPLE II code is an improved version of the MAPLE program for plotting fault trees. MAPLE II has added features which make it a versatile tool for drawing large and complex logic trees. The code is developed as part of a package for computer aided fault tree construction and analysis in which it is integrated and used as a documentation tool. However the MAPLE II code can be used as a separate program which uses as input a structure function of a tree and a description of the events and gates which make up the tree. This report includes a short description of the code and of its features. Moreover it contains the how-to-use and some indications for implementing the code and for adapting it to different graphics systems

  18. Process plant alarm diagnosis using synthesised fault tree knowledge

    International Nuclear Information System (INIS)

    Trenchard, A.J.

    1990-01-01

    The development of computer based tools, to assist process plant operators in their task of fault/alarm diagnosis, has received much attention over the last twenty five years. More recently, with the emergence of Artificial Intelligence (AI) technology, the research activity in this subject area has heightened. As a result, there are a great variety of fault diagnosis methodologies, using many different approaches to represent the fault propagation behaviour of process plant. These range in complexity from steady state quantitative models to more abstract definitions of the relationships between process alarms. Unfortunately, very few of the techniques have been tried and tested on process plant and even fewer have been judged to be commercial successes. One of the outstanding problems still remains the time and effort required to understand and model the fault propagation behaviour of each considered process. This thesis describes the development of an experimental knowledge based system (KBS) to diagnose process plant faults, as indicated by process variable alarms. In an attempt to minimise the modelling effort, the KBS has been designed to infer diagnoses using a fault tree representation of the process behaviour, generated using an existing fault tree synthesis package (FAULTFINDER). The process is described to FAULTFINDER as a configuration of unit models, derived from a standard model library or by tailoring existing models. The resultant alarm diagnosis methodology appears to work well for hard (non-rectifying) faults, but is likely to be less robust when attempting to diagnose intermittent faults and transient behaviour. The synthesised fault trees were found to contain the bulk of the information required for the diagnostic task, however, this needed to be augmented with extra information in certain circumstances. (author)

  19. Fault diagnosis of power transformer based on fault-tree analysis (FTA)

    Science.gov (United States)

    Wang, Yongliang; Li, Xiaoqiang; Ma, Jianwei; Li, SuoYu

    2017-05-01

    Power transformers is an important equipment in power plants and substations, power distribution transmission link is made an important hub of power systems. Its performance directly affects the quality and health of the power system reliability and stability. This paper summarizes the five parts according to the fault type power transformers, then from the time dimension divided into three stages of power transformer fault, use DGA routine analysis and infrared diagnostics criterion set power transformer running state, finally, according to the needs of power transformer fault diagnosis, by the general to the section by stepwise refinement of dendritic tree constructed power transformer fault

  20. Fault tree analysis. Implementation of the WAM-codes

    International Nuclear Information System (INIS)

    Bento, J.P.; Poern, K.

    1979-07-01

    The report describes work going on at Studsvik at the implementation of the WAM code package for fault tree analysis. These codes originally developed under EPRI contract by Sciences Applications Inc, allow, in contrast with other fault tree codes, all Boolean operations, thus allowing modeling of ''NOT'' conditions and dependent components. To concretize the implementation of these codes, the auxiliary feed-water system of the Swedish BWR Oskarshamn 2 was chosen for the reliability analysis. For this system, both the mean unavailability and the probability density function of the top event - undesired event - of the system fault tree were calculated, the latter using a Monte-Carlo simulation technique. The present study is the first part of a work performed under contract with the Swedish Nuclear Power Inspectorate. (author)

  1. Improvement of testing and maintenance based on fault tree analysis

    International Nuclear Information System (INIS)

    Cepin, M.

    2000-01-01

    Testing and maintenance of safety equipment is an important issue, which significantly contributes to safe and efficient operation of a nuclear power plant. In this paper a method, which extends the classical fault tree with time, is presented. Its mathematical model is represented by a set of equations, which include time requirements defined in the house event matrix. House events matrix is a representation of house events switched on and off through the discrete points of time. It includes house events, which timely switch on and off parts of the fault tree in accordance with the status of the plant configuration. Time dependent top event probability is calculated by the fault tree evaluations. Arrangement of components outages is determined on base of minimization of mean system unavailability. The results show that application of the method may improve the time placement of testing and maintenance activities of safety equipment. (author)

  2. Fault tree technique: advances in probabilistic and logical analysis

    International Nuclear Information System (INIS)

    Clarotti, C.A.; Amendola, A.; Contini, S.; Squellati, G.

    1982-01-01

    Fault tree reliability analysis is used for assessing the risk associated to systems of increasing complexity (phased mission systems, systems with multistate components, systems with non-monotonic structure functions). Much care must be taken to make sure that fault tree technique is not used beyond its correct validity range. To this end a critical review of mathematical foundations of reliability fault tree analysis is carried out. Limitations are enlightened and potential solutions to open problems are suggested. Moreover an overview is given on the most recent developments in the implementation of an integrated software (SALP-MP, SALP-NOT, SALP-CAFT Codes) for the analysis of a wide class of systems

  3. Application Research of Fault Tree Analysis in Grid Communication System Corrective Maintenance

    Science.gov (United States)

    Wang, Jian; Yang, Zhenwei; Kang, Mei

    2018-01-01

    This paper attempts to apply the fault tree analysis method to the corrective maintenance field of grid communication system. Through the establishment of the fault tree model of typical system and the engineering experience, the fault tree analysis theory is used to analyze the fault tree model, which contains the field of structural function, probability importance and so on. The results show that the fault tree analysis can realize fast positioning and well repairing of the system. Meanwhile, it finds that the analysis method of fault tree has some guiding significance to the reliability researching and upgrading f the system.

  4. A computer code for fault tree calculations: PATREC

    International Nuclear Information System (INIS)

    Blin, A.; Carnino, A.; Koen, B.V.; Duchemin, B.; Lanore, J.M.; Kalli, H.

    1978-01-01

    A computer code for evaluating the reliability of complex system by fault tree is described in this paper. It uses pattern recognition approach and programming techniques from IBM PL1 language. It can take account of many of the present day problems: multi-dependencies treatment, dispersion in the reliability data parameters, influence of common mode failures. The code is running currently since two years now in Commissariat a l'Energie Atomique Saclay center and shall be used in a future extension for automatic fault trees construction

  5. Computer-oriented approach to fault-tree construction

    International Nuclear Information System (INIS)

    Salem, S.L.; Apostolakis, G.E.; Okrent, D.

    1976-11-01

    A methodology for systematically constructing fault trees for general complex systems is developed and applied, via the Computer Automated Tree (CAT) program, to several systems. A means of representing component behavior by decision tables is presented. The method developed allows the modeling of components with various combinations of electrical, fluid and mechanical inputs and outputs. Each component can have multiple internal failure mechanisms which combine with the states of the inputs to produce the appropriate output states. The generality of this approach allows not only the modeling of hardware, but human actions and interactions as well. A procedure for constructing and editing fault trees, either manually or by computer, is described. The techniques employed result in a complete fault tree, in standard form, suitable for analysis by current computer codes. Methods of describing the system, defining boundary conditions and specifying complex TOP events are developed in order to set up the initial configuration for which the fault tree is to be constructed. The approach used allows rapid modifications of the decision tables and systems to facilitate the analysis and comparison of various refinements and changes in the system configuration and component modeling

  6. Open Issues in Object-Oriented Programming

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    1995-01-01

    We discuss a number of open issues within object-oriented programming. The central mechanisms of object-oriented programming appeared with Simula, developed more than 30 years ago; these include class, subclass, virtual function, active object and the first application framework, Class Simulation....... The core parts of object-oriented programming should be well understood, but there are still a large number of issues where there is no consensus. The term object-orientation has been applied to many subjects, such as analysis, design implementation, data modeling in databases, and distribution...

  7. Programming in an object-oriented environment

    CERN Document Server

    Ege, Raimund K

    1992-01-01

    Programming in an Object-Oriented Environment provides an in-depth look at the concepts behind the technology of object-oriented programming.This book explains why object-oriented programming has the potential to vastly improve the productivity of programmers and how to apply this technology in a practical environment. Many programming examples are included, focusing on how different programming languages support the core of object-oriented concepts. C++ is used as the main sample language throughout this text.This monograph consists of two major parts. Part I provides an introduction to objec

  8. WAMCUT, a computer code for fault tree evaluation. Final report

    International Nuclear Information System (INIS)

    Erdmann, R.C.

    1978-06-01

    WAMCUT is a code in the WAM family which produces the minimum cut sets (MCS) for a given fault tree. The MCS are useful as they provide a qualitative evaluation of a system, as well as providing a means of determining the probability distribution function for the top of the tree. The program is very efficient and will produce all the MCS in a very short computer time span. 22 figures, 4 tables

  9. FTAP, Minimal Cut Sets of Arbitrary Fault Trees. FRTPLT, Fault Tree Structure and Logical Gates Plot for Program FTAP. FRTGEN, Fault Trees by Sub-tree Generator from Parent Tree for Program FTAP

    International Nuclear Information System (INIS)

    Willie, Randall R.; Rabien, U.

    1997-01-01

    1 - Description of problem or function: FTAP is a general-purpose program for deriving minimal reliability cut and path set families from the fault tree for a complex system. The program has a number of useful features that make it well-suited to nearly all fault tree applications. An input fault tree may specify the system state as any logical function of subsystem or component state variables or complements of these variables; thus, for instance, 'exclusive-or' type relations may be formed. When fault tree logical relations involve complements of state variables, the analyst may instruct FTAP to produce a family of prime implicants, a generalization of the minimal cut set concept. The program offers the flexibility of several distinct methods of generating cut set families. FTAP can also identify certain subsystems as system modules and provide a collection of minimal cut set families that essentially expresses the system state as a function of these module state variables. Another feature allows a useful subfamily to be obtained when the family of minimal cut sets or prime implicants is too large to be found in its entirety; this subfamily may consist of only those sets not containing more than some fixed number of elements or only those sets 'interesting' to the analyst in some special sense. Finally, the analyst can modify the input fault tree in various ways by declaring state variables identically true or false. 2 - Method of solution: Fault tree methods are based on the observation that the system state, either working or failed, can usually be expressed as a Boolean relation between states of several large, readily identifiable subsystems. The state of each subsystem in turn depends on states of simpler subsystems and components which compose it, so that the state of the system itself is determined by a hierarchy of logical relationships between states of subsystems. A fault tree is a graphical representation of these relationships. 3 - Restrictions on the

  10. Using Fault Trees to Advance Understanding of Diagnostic Errors.

    Science.gov (United States)

    Rogith, Deevakar; Iyengar, M Sriram; Singh, Hardeep

    2017-11-01

    Diagnostic errors annually affect at least 5% of adults in the outpatient setting in the United States. Formal analytic techniques are only infrequently used to understand them, in part because of the complexity of diagnostic processes and clinical work flows involved. In this article, diagnostic errors were modeled using fault tree analysis (FTA), a form of root cause analysis that has been successfully used in other high-complexity, high-risk contexts. How factors contributing to diagnostic errors can be systematically modeled by FTA to inform error understanding and error prevention is demonstrated. A team of three experts reviewed 10 published cases of diagnostic error and constructed fault trees. The fault trees were modeled according to currently available conceptual frameworks characterizing diagnostic error. The 10 trees were then synthesized into a single fault tree to identify common contributing factors and pathways leading to diagnostic error. FTA is a visual, structured, deductive approach that depicts the temporal sequence of events and their interactions in a formal logical hierarchy. The visual FTA enables easier understanding of causative processes and cognitive and system factors, as well as rapid identification of common pathways and interactions in a unified fashion. In addition, it enables calculation of empirical estimates for causative pathways. Thus, fault trees might provide a useful framework for both quantitative and qualitative analysis of diagnostic errors. Future directions include establishing validity and reliability by modeling a wider range of error cases, conducting quantitative evaluations, and undertaking deeper exploration of other FTA capabilities. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

  11. Plug & Play object oriented Bayesian networks

    DEFF Research Database (Denmark)

    Bangsø, Olav; Flores, J.; Jensen, Finn Verner

    2003-01-01

    been shown to be quite suitable for dynamic domains as well. However, processing object oriented Bayesian networks in practice does not take advantage of their modular structure. Normally the object oriented Bayesian network is transformed into a Bayesian network and, inference is performed...... dynamic domains. The communication needed between instances is achieved by means of a fill-in propagation scheme....

  12. Parallel object-oriented specification language

    NARCIS (Netherlands)

    Florescu, O.; Voeten, J.P.M.; Theelen, B.D.; Geilen, M.C.W.; Corporaal, H.; Burns, Alan

    2008-01-01

    The Parallel Object-Oriented Specification Language (POOSL) is an expressive modelling language for hardware/software systems [10]. It was originally defined in [7] as an object-oriented extension of process algebra CCS [6], supporting (conditional) synchronous message passing between

  13. Object-Oriented Econometrics with Ox

    OpenAIRE

    Kulaksizoglu, Tamer

    2015-01-01

    This article reviews the object-oriented features of the Ox matrix programming language. We discuss object-oriented programming in general and give econometric examples coded in Ox. We also discuss some useful built-in classes that come with the Ox distribution.

  14. Study on the scope of fault tree method applicability

    International Nuclear Information System (INIS)

    Ito, Taiju

    1980-03-01

    In fault tree analysis of the reliability of nuclear safety system, including reliability analysis of nuclear protection system, there seem to be some documents in which application of the fault tree method is unreasonable. In fault tree method, the addition rule and the multiplication rule are usually used. The addition rule and the multiplication rule must hold exactly or at least practically. The addition rule has no problem but the multiplication rule has occasionally some problem. For unreliability, mean unavailability and instantaneous unavailability of the elements, holding or not of the multiplication rule has been studied comprehensively. Between the unreliability of each element without maintenance, the multiplication rule holds. Between the instantaneous unavailability of each element, with maintenance or not, the multiplication rule also holds. Between the unreliability of each subsystem with maintenance, however, the multiplication rule does not hold, because the product value is larger than the value of unreliability for a parallel system consisting of the two subsystems with maintenance. Between the mean unavailability of each element without maintenance, the multiplication rule also does not hold, because the product value is smaller than the value of mean unavailability for a parallel system consisting of the two elements without maintenance. In these cases, therefore, the fault tree method may not be applied by rote for reliability analysis of the system. (author)

  15. MFAULT: a computer program for analyzing fault trees

    International Nuclear Information System (INIS)

    Pelto, P.J.; Purcell, W.L.

    1977-11-01

    A description and user instructions are presented for MFAULT, a FORTRAN computer program for fault tree analysis. MFAULT identifies the cut sets of a fault tree, calculates their probabilities, and screens the cut sets on the basis of specified cut-offs on probability and/or cut set length. MFAULT is based on an efficient upward-working algorithm for cut set identification. The probability calculations are based on the assumption of small probabilities and constant hazard rates (i.e., exponential failure distributions). Cut sets consisting of repairable components (basic events) only, non-repairable components only, or mixtures of both types can be evaluated. Components can be on-line or standby. Unavailability contributions from pre-existing failures, failures on demand, and testing and maintenance down-time can be handled. MFAULT can analyze fault trees with AND gates, OR gates, inhibit gates, on switches (houses) and off switches. The code is presently capable of finding up to ten event cut sets from a fault tree with up to 512 basic events and 400 gates. It is operational on the CONTROL DATA CYBER 74 computer. 11 figures

  16. Verification of Fault Tree Models with RBDGG Methodology

    International Nuclear Information System (INIS)

    Kim, Man Cheol

    2010-01-01

    Currently, fault tree analysis is widely used in the field of probabilistic safety assessment (PSA) of nuclear power plants (NPPs). To guarantee the correctness of fault tree models, which are usually manually constructed by analysts, a review by other analysts is widely used for verifying constructed fault tree models. Recently, an extension of the reliability block diagram was developed, which is named as RBDGG (reliability block diagram with general gates). The advantage of the RBDGG methodology is that the structure of a RBDGG model is very similar to the actual structure of the analyzed system and, therefore, the modeling of a system for a system reliability and unavailability analysis becomes very intuitive and easy. The main idea of the development of the RBDGG methodology is similar to that of the development of the RGGG (Reliability Graph with General Gates) methodology. The difference between the RBDGG methodology and RGGG methodology is that the RBDGG methodology focuses on the block failures while the RGGG methodology focuses on the connection line failures. But, it is also known that an RGGG model can be converted to an RBDGG model and vice versa. In this paper, a new method for the verification of the constructed fault tree models using the RBDGG methodology is proposed and demonstrated

  17. Fuzzy set theoretic approach to fault tree analysis | Tyagi ...

    African Journals Online (AJOL)

    This approach can be widely used to improve the reliability and to reduce the operating cost of a system. The proposed techniques are discussed and illustrated by taking an example of a nuclear power plant. Keywords: Fault tree, Triangular and Trapezoidal fuzzy number, Fuzzy importance, Ranking of fuzzy numbers ...

  18. Quantitative security and safety analysis with attack-fault trees

    NARCIS (Netherlands)

    Kumar, Rajesh; Stoelinga, Mariëlle Ida Antoinette

    2017-01-01

    Cyber physical systems, like power plants, medical devices and data centers have to meet high standards, both in terms of safety (i.e. absence of unintentional failures) and security (i.e. no disruptions due to malicious attacks). This paper presents attack fault trees (AFTs), a formalism that

  19. Partitioning an object-oriented terminology schema.

    Science.gov (United States)

    Gu, H; Perl, Y; Halper, M; Geller, J; Kuo, F; Cimino, J J

    2001-07-01

    Controlled medical terminologies are increasingly becoming strategic components of various healthcare enterprises. However, the typical medical terminology can be difficult to exploit due to its extensive size and high density. The schema of a medical terminology offered by an object-oriented representation is a valuable tool in providing an abstract view of the terminology, enhancing comprehensibility and making it more usable. However, schemas themselves can be large and unwieldy. We present a methodology for partitioning a medical terminology schema into manageably sized fragments that promote increased comprehension. Our methodology has a refinement process for the subclass hierarchy of the terminology schema. The methodology is carried out by a medical domain expert in conjunction with a computer. The expert is guided by a set of three modeling rules, which guarantee that the resulting partitioned schema consists of a forest of trees. This makes it easier to understand and consequently use the medical terminology. The application of our methodology to the schema of the Medical Entities Dictionary (MED) is presented.

  20. Object-oriented alarm-filtering system

    International Nuclear Information System (INIS)

    Corsberg, D.R.; Wilkie, D.

    1986-01-01

    This paper discusses an alarm-filtering system (AFS) being developed by EG and G Idaho, Inc. for the Advanced Test Reactor (ATR) at the Idaho National Engineering Laboratory. The ultimate goal of this project is to place AFS into ATR's reactor control room to act as an aid during major plant transients. In addition, methods of alarm analysis are investigated based on functional relationships rather than on a historical approach utilizing cause-consequence trees. Artificial intelligence techniques, including object-oriented programming, are also demonstrated as useful in analyzing alarms and alarm sequences. After a brief description of the problem AFS addresses, this paper discusses the design constraints and human factors that influenced the development of the system. The reader is then presented with operational and architectural descriptions of the system as well as what directions the future development of AFS may take. The fact that AFS is being considered as a partial solution to the problems discussed in the next section demonstrates the viability of its underlying technology and approach. 10 refs

  1. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    2017-01-01

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object......-oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...... of data being manipulated. You will: Define and use classes and generic functions using R Work with the R class hierarchies Benefit from implementation reuse Handle operator overloading Apply the S4 and R6 classes...

  2. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object......-oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...... of data being manipulated. You will: Define and use classes and generic functions using R Work with the R class hierarchies Benefit from implementation reuse Handle operator overloading Apply the S4 and R6 classes...

  3. Approximate dynamic fault tree calculations for modelling water supply risks

    International Nuclear Information System (INIS)

    Lindhe, Andreas; Norberg, Tommy; Rosén, Lars

    2012-01-01

    Traditional fault tree analysis is not always sufficient when analysing complex systems. To overcome the limitations dynamic fault tree (DFT) analysis is suggested in the literature as well as different approaches for how to solve DFTs. For added value in fault tree analysis, approximate DFT calculations based on a Markovian approach are presented and evaluated here. The approximate DFT calculations are performed using standard Monte Carlo simulations and do not require simulations of the full Markov models, which simplifies model building and in particular calculations. It is shown how to extend the calculations of the traditional OR- and AND-gates, so that information is available on the failure probability, the failure rate and the mean downtime at all levels in the fault tree. Two additional logic gates are presented that make it possible to model a system's ability to compensate for failures. This work was initiated to enable correct analyses of water supply risks. Drinking water systems are typically complex with an inherent ability to compensate for failures that is not easily modelled using traditional logic gates. The approximate DFT calculations are compared to results from simulations of the corresponding Markov models for three water supply examples. For the traditional OR- and AND-gates, and one gate modelling compensation, the errors in the results are small. For the other gate modelling compensation, the error increases with the number of compensating components. The errors are, however, in most cases acceptable with respect to uncertainties in input data. The approximate DFT calculations improve the capabilities of fault tree analysis of drinking water systems since they provide additional and important information and are simple and practically applicable.

  4. Fault trees for decision making in systems analysis

    International Nuclear Information System (INIS)

    Lambert, H.E.

    1975-01-01

    The application of fault tree analysis (FTA) to system safety and reliability is presented within the framework of system safety analysis. The concepts and techniques involved in manual and automated fault tree construction are described and their differences noted. The theory of mathematical reliability pertinent to FTA is presented with emphasis on engineering applications. An outline of the quantitative reliability techniques of the Reactor Safety Study is given. Concepts of probabilistic importance are presented within the fault tree framework and applied to the areas of system design, diagnosis and simulation. The computer code IMPORTANCE ranks basic events and cut sets according to a sensitivity analysis. A useful feature of the IMPORTANCE code is that it can accept relative failure data as input. The output of the IMPORTANCE code can assist an analyst in finding weaknesses in system design and operation, suggest the most optimal course of system upgrade, and determine the optimal location of sensors within a system. A general simulation model of system failure in terms of fault tree logic is described. The model is intended for efficient diagnosis of the causes of system failure in the event of a system breakdown. It can also be used to assist an operator in making decisions under a time constraint regarding the future course of operations. The model is well suited for computer implementation. New results incorporated in the simulation model include an algorithm to generate repair checklists on the basis of fault tree logic and a one-step-ahead optimization procedure that minimizes the expected time to diagnose system failure. (80 figures, 20 tables)

  5. Beginning C# Object-Oriented Programming

    CERN Document Server

    Clark, Dan

    2011-01-01

    Beginning C# Object-Oriented Programming brings you into the modern world of development as you master the fundamentals of programming with C# and learn to develop efficient, reusable, elegant code through the object-oriented programming (OOP) methodology. Take your skills out of the 20th century and into this one with Dan Clark's accessible, quick-paced guide to C# and object-oriented programming, completely updated for .NET 4.0 and C# 4.0. As you develop techniques and best practices for coding in C#, one of the world's most popular contemporary languages, you'll experience modeling a "real

  6. Three Object-Oriented enhancement for EPICS

    Science.gov (United States)

    Osberg, E. A.; Dohan, D. A.; Richter, R.; Biggs, R.; Chillara, K.; Wade, D.; Bossom, J.

    1994-12-01

    In line with our group's intention of producing software using, where possible, Object-Oriented methodologies and techniques in the development of RF control systems, we have undertaken three projects to enhance the EPICS software environment. Two of the projects involve interfaces to EPICs Channel Access from Object-Oriented languages. The third is an enhancement to the EPICS State Notation Language to better support the Shlaer-Mellor Object-Oriented Analysis and Design Methodology. This paper discusses the motivation, approaches, results and future directions of these three projects.

  7. An outline of object-oriented philosophy.

    Science.gov (United States)

    Harman, Graham

    2013-01-01

    This article summarises the principles of object-oriented philosophy and explains its similarities with, and differences from, the outlook of the natural sciences. Like science, the object-oriented position avoids the notion (quite common in philosophy) that the human-world relation is the ground of all others, such that scientific statements about the world would only be statements about the world as it is for humans. But unlike science, object-oriented metaphysics treats artificial, social, and fictional entities in the same way as natural ones, and also holds that the world can only be known allusively rather than directly.

  8. Object oriented approach to B reconstruction

    International Nuclear Information System (INIS)

    Katayama, N.

    1992-01-01

    The complexity of full and partial reconstruction of B mesons has led CLEO to use object oriented techniques to do physics data analyses. An object oriented language for HEP data analysis was designed, a compiler which translates the user code into C++ source code, has been written using the UNIX tools, lex and yacc. The resulting C++ code can be linked and run in the normal CLEO data analysis system

  9. Fault trees based on past accidents. Factorial analysis of events

    International Nuclear Information System (INIS)

    Vaillant, M.

    1977-01-01

    The method of the fault tree is already useful in the qualitative step before any reliability calculation. The construction of the tree becomes even simpler when we just want to describe how the events happened. Differently from screenplays that introduce several possibilities by means of the conjunction OR, you only have here the conjunction AND, which will not be written at all. This method is presented by INRS (1) for the study of industrial injuries; it may also be applied to material damages. (orig.) [de

  10. Systems analysis approach to probabilistic modeling of fault trees

    International Nuclear Information System (INIS)

    Bartholomew, R.J.; Qualls, C.R.

    1985-01-01

    A method of probabilistic modeling of fault tree logic combined with stochastic process theory (Markov modeling) has been developed. Systems are then quantitatively analyzed probabilistically in terms of their failure mechanisms including common cause/common mode effects and time dependent failure and/or repair rate effects that include synergistic and propagational mechanisms. The modeling procedure results in a state vector set of first order, linear, inhomogeneous, differential equations describing the time dependent probabilities of failure described by the fault tree. The solutions of this Failure Mode State Variable (FMSV) model are cumulative probability distribution functions of the system. A method of appropriate synthesis of subsystems to form larger systems is developed and applied to practical nuclear power safety systems

  11. Mode automata and their compilation into fault trees

    International Nuclear Information System (INIS)

    Rauzy, Antoine

    2002-01-01

    In this article, we advocate the use of mode automata as a high level representation language for reliability studies. Mode automata are states/transitions based representations with the additional notion of flow. They can be seen as a generalization of both finite capacity Petri nets and block diagrams. They can be assembled into hierarchies by means of composition operations. The contribution of this article is twofold. First, we introduce mode automata and we discuss their relationship with other formalisms. Second, we propose an algorithm to compile mode automata into Boolean equations (fault trees). Such a compilation is of interest for two reasons. First, assessment tools for Boolean models are much more efficient than those for states/transitions models. Second, the automated generation of fault trees from higher level representations makes easier their maintenance through the life cycle of systems under study

  12. Fuzzy probability based fault tree analysis to propagate and quantify epistemic uncertainty

    International Nuclear Information System (INIS)

    Purba, Julwan Hendry; Sony Tjahyani, D.T.; Ekariansyah, Andi Sofrany; Tjahjono, Hendro

    2015-01-01

    Highlights: • Fuzzy probability based fault tree analysis is to evaluate epistemic uncertainty in fuzzy fault tree analysis. • Fuzzy probabilities represent likelihood occurrences of all events in a fault tree. • A fuzzy multiplication rule quantifies epistemic uncertainty of minimal cut sets. • A fuzzy complement rule estimate epistemic uncertainty of the top event. • The proposed FPFTA has successfully evaluated the U.S. Combustion Engineering RPS. - Abstract: A number of fuzzy fault tree analysis approaches, which integrate fuzzy concepts into the quantitative phase of conventional fault tree analysis, have been proposed to study reliabilities of engineering systems. Those new approaches apply expert judgments to overcome the limitation of the conventional fault tree analysis when basic events do not have probability distributions. Since expert judgments might come with epistemic uncertainty, it is important to quantify the overall uncertainties of the fuzzy fault tree analysis. Monte Carlo simulation is commonly used to quantify the overall uncertainties of conventional fault tree analysis. However, since Monte Carlo simulation is based on probability distribution, this technique is not appropriate for fuzzy fault tree analysis, which is based on fuzzy probabilities. The objective of this study is to develop a fuzzy probability based fault tree analysis to overcome the limitation of fuzzy fault tree analysis. To demonstrate the applicability of the proposed approach, a case study is performed and its results are then compared to the results analyzed by a conventional fault tree analysis. The results confirm that the proposed fuzzy probability based fault tree analysis is feasible to propagate and quantify epistemic uncertainties in fault tree analysis

  13. HVAC fault tree analysis for WIPP integrated risk assessment

    International Nuclear Information System (INIS)

    Kirby, P.; Iacovino, J.

    1990-01-01

    In order to evaluate the public health risk from operation of the Waste Isolation Pilot Plant (WIPP) due to potential radioactive releases, a probabilistic risk assessment of waste handling operations was conducted. One major aspect of this risk assessment involved fault tree analysis of the plant heating, ventilation, and air conditioning (HVAC) systems, which comprise the final barrier between waste handling operations and the environment. 1 refs., 1 tab

  14. RAFT: a computer program for fault tree risk calculations

    International Nuclear Information System (INIS)

    Seybold, G.D.

    1977-11-01

    A description and user instructions are presented for RAFT, a FORTRAN computer code for calculation of a risk measure for fault tree cut sets. RAFT calculates release quantities and a risk measure based on the product of probability and release quantity for cut sets of fault trees modeling the accidental release of radioactive material from a nuclear fuel cycle facility. Cut sets and their probabilities are supplied as input to RAFT from an external fault tree analysis code. Using the total inventory available of radioactive material, along with release fractions for each event in a cut set, the release terms are calculated for each cut set. Each release term is multiplied by the cut set probability to yield the cut set risk measure. RAFT orders the dominant cut sets on the risk measure. The total risk measure of processed cut sets and their fractional contributions are supplied as output. Input options are available to eliminate redundant cut sets, apply threshold values on cut set probability and risk, and control the total number of cut sets output. Hash addressing is used to remove redundant cut sets from the analysis. Computer hardware and software restrictions are given along with a sample problem and cross-reference table of the code. Except for the use of file management utilities, RAFT is written exclusively in FORTRAN language and is operational on a Control Data, CYBER 74-18--series computer system. 4 figures

  15. Generalized fault tree analysis combined with state analysis

    International Nuclear Information System (INIS)

    Caldarola, L.

    1980-02-01

    An analytical theory has been developed which allows one to calculate the occurrence probability of the top event of a fault tree with multistate (two or more than two states) components. It is shown that, in order to correctly describe a system with multistate components, a special type of boolean algebra is required. This is called 'boolean algebra with restrictions on variables' and its basic rules are the same as those of the traditional boolean algebra with some additional restrictions on the variables. These restrictions are extensively discussed in the paper. It is also shown that the boolean algebra with restrictions on variables facilitates the task of formally combining fault tree analysis with state analysis. The computer program MUSTAFA 1 based on the above theory has been developed. It can analyse fault trees of system containing statistically independent as well as dependent components with two or more than two states. MUSTAFA 1 can handle coherent as well as non coherent boolean functions. (orig.) 891 HP/orig. 892 MB [de

  16. A fast BDD algorithm for large coherent fault trees analysis

    International Nuclear Information System (INIS)

    Jung, Woo Sik; Han, Sang Hoon; Ha, Jaejoo

    2004-01-01

    Although a binary decision diagram (BDD) algorithm has been tried to solve large fault trees until quite recently, they are not efficiently solved in a short time since the size of a BDD structure exponentially increases according to the number of variables. Furthermore, the truncation of If-Then-Else (ITE) connectives by the probability or size limit and the subsuming to delete subsets could not be directly applied to the intermediate BDD structure under construction. This is the motivation for this work. This paper presents an efficient BDD algorithm for large coherent systems (coherent BDD algorithm) by which the truncation and subsuming could be performed in the progress of the construction of the BDD structure. A set of new formulae developed in this study for AND or OR operation between two ITE connectives of a coherent system makes it possible to delete subsets and truncate ITE connectives with a probability or size limit in the intermediate BDD structure under construction. By means of the truncation and subsuming in every step of the calculation, large fault trees for coherent systems (coherent fault trees) are efficiently solved in a short time using less memory. Furthermore, the coherent BDD algorithm from the aspect of the size of a BDD structure is much less sensitive to variable ordering than the conventional BDD algorithm

  17. SOFT TREE: Fault Tree Technique as Applied to Software. Revision.

    Science.gov (United States)

    1983-10-01

    13 12 - 16 03 - 18 09 - 19 01 - 19 02 - 19 03 - 19 05 18. Con’t Non- Nuclear Munition, Non- Nuclear Munition Safety, Fuze Safety, Microprocessor...costucin the’ V’Y wvSoft Tree be ver fam-’il~. iar-a’--. that te persnns conihhsutnge thoftd refec be very familia wthipeetino microprocessosor atd idotwee h...ro 7- qSf" fart~b -To WA0 IFu t TOC6Lf e aF ’t9 q-EN rNz Al fC1~ATOk -1- 1AP6AG $ LA ? To.~ Yujiif’ ToA4. IWOv~:EAii CI~t~J~13Lf ToP5M A~E F CAP Avrif

  18. Fault diagnostics of dynamic system operation using a fault tree based method

    International Nuclear Information System (INIS)

    Hurdle, E.E.; Bartlett, L.M.; Andrews, J.D.

    2009-01-01

    For conventional systems, their availability can be considerably improved by reducing the time taken to restore the system to the working state when faults occur. Fault identification can be a significant proportion of the time taken in the repair process. Having diagnosed the problem the restoration of the system back to its fully functioning condition can then take place. This paper expands the capability of previous approaches to fault detection and identification using fault trees for application to dynamically changing systems. The technique has two phases. The first phase is modelling and preparation carried out offline. This gathers information on the effects that sub-system failure will have on the system performance. Causes of the sub-system failures are developed in the form of fault trees. The second phase is application. Sensors are installed on the system to provide information about current system performance from which the potential causes can be deduced. A simple system example is used to demonstrate the features of the method. To illustrate the potential for the method to deal with additional system complexity and redundancy, a section from an aircraft fuel system is used. A discussion of the results is provided.

  19. Object-oriented programming for the biosciences.

    Science.gov (United States)

    Wiechert, W; Joksch, B; Wittig, R; Hartbrich, A; Höner, T; Möllney, M

    1995-10-01

    The development of software systems for the biosciences is always closely connected to experimental practice. Programs must be able to handle the inherent complexity and heterogeneous structure of biological systems in combination with the measuring equipment. Moreover, a high degree of flexibility is required to treat rapidly changing experimental conditions. Object-oriented methodology seems to be well suited for this purpose. It enables an evolutionary approach to software development that still maintains a high degree of modularity. This paper presents experience with object-oriented technology gathered during several years of programming in the fields of bioprocess development and metabolic engineering. It concentrates on the aspects of experimental support, data analysis, interaction and visualization. Several examples are presented and discussed in the general context of the experimental cycle of knowledge acquisition, thus pointing out the benefits and problems of object-oriented technology in the specific application field of the biosciences. Finally, some strategies for future development are described.

  20. Efficient reduction and modularization for large fault trees stored by pages

    International Nuclear Information System (INIS)

    Chen, Shanqi; Wang, Jin; Wang, Jiaqun; Wang, Fang; Hu, Liqin

    2016-01-01

    Highlights: • New fault tree pre-processing methods used in RiskA are presented. • Including the fault tree paging storage, simplification and modularization. • For getting MCS for fault trees containing more than 10,000 gates and events. • Reduce computer resources needs (RAM) and improve computation speed. - Abstract: Fault Tree Analysis (FTA), an indispensable tool used in Probabilistic Risk Assessment (PRA), has been used throughout the commercial nuclear power industry for safety and reliability analyses. However, large fault tree analysis, such as those used in nuclear power plant requires significant computer resources, which makes the analysis of PRA model inefficient and time consuming. This paper describes a fault tree pre-processing method used in the reliability and probabilistic safety assessment program RiskA that is capable of generating minimal cutsets for fault trees containing more than 10,000 gates and basic events. The novel feature of this method is not only that Boolean reduction rules are used but also that a new objective of simplification is proposed. Moreover, since the method aims to find more fault tree modules by the linear-time algorithm, it can optimize fault tree modularization, which further reduces the computational time of large fault tree analysis.

  1. Plotting and analysis of fault trees in safety evaluation of nuclear power plants

    International Nuclear Information System (INIS)

    Wild, A.

    1979-12-01

    Fault tree analysis is a useful tool in determining the safety and reliability of nuclear power plants. The main strength of the fault tree method, its ability to detect cross-links between systems, can be used only if fault trees are constructed for complete nuclear generating stations. Such trees are large and have to be handled by computers. A system is described for handling fault trees using small computers such as the HP-1000 with disc drive, graphics terminal and x-y plotter

  2. New algorithm to detect modules in a fault tree for a PSA

    International Nuclear Information System (INIS)

    Jung, Woo Sik

    2015-01-01

    A module or independent subtree is a part of a fault tree whose child gates or basic events are not repeated in the remaining part of the fault tree. Modules are necessarily employed in order to reduce the computational costs of fault tree quantification. This paper presents a new linear time algorithm to detect modules of large fault trees. The size of cut sets can be substantially reduced by replacing independent subtrees in a fault tree with super-components. Chatterjee and Birnbaum developed properties of modules, and demonstrated their use in the fault tree analysis. Locks expanded the concept of modules to non-coherent fault trees. Independent subtrees were manually identified while coding a fault tree for computer analysis. However, nowadays, the independent subtrees are automatically identified by the fault tree solver. A Dutuit and Rauzy (DR) algorithm to detect modules of a fault tree for coherent or non-coherent fault tree was proposed in 1996. It has been well known that this algorithm quickly detects modules since it is a linear time algorithm. The new algorithm minimizes computational memory and quickly detects modules. Furthermore, it can be easily implemented into industry fault tree solvers that are based on traditional Boolean algebra, binary decision diagrams (BDDs), or Zero-suppressed BDDs. The new algorithm employs only two scalar variables in Eqs. to that are volatile information. After finishing the traversal and module detection of each node, the volatile information is destroyed. Thus, the new algorithm does not employ any other additional computational memory and operations. It is recommended that this method be implemented into fault tree solvers for efficient probabilistic safety assessment (PSA) of nuclear power plants

  3. New algorithm to detect modules in a fault tree for a PSA

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Woo Sik [Sejong University, Seoul (Korea, Republic of)

    2015-05-15

    A module or independent subtree is a part of a fault tree whose child gates or basic events are not repeated in the remaining part of the fault tree. Modules are necessarily employed in order to reduce the computational costs of fault tree quantification. This paper presents a new linear time algorithm to detect modules of large fault trees. The size of cut sets can be substantially reduced by replacing independent subtrees in a fault tree with super-components. Chatterjee and Birnbaum developed properties of modules, and demonstrated their use in the fault tree analysis. Locks expanded the concept of modules to non-coherent fault trees. Independent subtrees were manually identified while coding a fault tree for computer analysis. However, nowadays, the independent subtrees are automatically identified by the fault tree solver. A Dutuit and Rauzy (DR) algorithm to detect modules of a fault tree for coherent or non-coherent fault tree was proposed in 1996. It has been well known that this algorithm quickly detects modules since it is a linear time algorithm. The new algorithm minimizes computational memory and quickly detects modules. Furthermore, it can be easily implemented into industry fault tree solvers that are based on traditional Boolean algebra, binary decision diagrams (BDDs), or Zero-suppressed BDDs. The new algorithm employs only two scalar variables in Eqs. to that are volatile information. After finishing the traversal and module detection of each node, the volatile information is destroyed. Thus, the new algorithm does not employ any other additional computational memory and operations. It is recommended that this method be implemented into fault tree solvers for efficient probabilistic safety assessment (PSA) of nuclear power plants.

  4. Object-oriented programming with gradual abstraction

    DEFF Research Database (Denmark)

    Nørmark, Kurt; Thomsen, Lone Leth; Thomsen, Bent

    2013-01-01

    We describe an experimental object-oriented programming language, ASL2, that supports program development by means of a series of abstraction steps. The language allows immediate object construction, and it is possible to use the constructed objects for concrete problem solving tasks. Classes...... restrictive. As a central mechanism, weakly classified objects are allowed to borrow methods from each other. ASL2 supports class generalization, as a counterpart to class specialization and inheritance in mainstream object-oriented programming languages. The final abstraction step discussed in this paper...

  5. PL-MOD: a computer code for modular fault tree analysis and evaluation

    International Nuclear Information System (INIS)

    Olmos, J.; Wolf, L.

    1978-01-01

    The computer code PL-MOD has been developed to implement the modular methodology to fault tree analysis. In the modular approach, fault tree structures are characterized by recursively relating the top tree event to all basic event inputs through a set of equations, each defining an independent modular event for the tree. The advantages of tree modularization lie in that it is a more compact representation than the minimal cut-set description and in that it is well suited for fault tree quantification because of its recursive form. In its present version, PL-MOD modularizes fault trees and evaluates top and intermediate event failure probabilities, as well as basic component and modular event importance measures, in a very efficient way. Thus, its execution time for the modularization and quantification of a PWR High Pressure Injection System reduced fault tree was 25 times faster than that necessary to generate its equivalent minimal cut-set description using the computer code MOCUS

  6. Modularization of fault trees: a method to reduce the cost of analysis

    International Nuclear Information System (INIS)

    Chatterjee, P.

    1975-01-01

    The problem of analyzing large fault trees is considered. The concept of the finest modular representation of a fault tree is introduced and an algorithm is presented for finding this representation. The algorithm will also identify trees which cannot be modularized. Applications of such modularizations are discussed

  7. Diagnosis of Constant Faults in Read-Once Contact Networks over Finite Bases using Decision Trees

    KAUST Repository

    Busbait, Monther I.

    2014-01-01

    We study the depth of decision trees for diagnosis of constant faults in read-once contact networks over finite bases. This includes diagnosis of 0-1 faults, 0 faults and 1 faults. For any finite basis, we prove a linear upper bound on the minimum

  8. Recent advancements in fault tree methodology at Karlsruhe

    International Nuclear Information System (INIS)

    Caldarola, L.; Wickenhaeuser, A.

    1977-01-01

    A very fast analytical computer program for fault tree evaluation has already been developed at the German nuclear research center of Karlsruhe. This program can evaluate coherent systems assuming binary component states. Four different classes of components can be handled by the program: (1) unrepairable components, (2) repairable components with revealed faults, (3) repairable components with faults remaining unrevealed until next demand occurs and (4) repairable components with faults which are detected upon inspection. The program can perform also time dependent calculations. In particular the program can analyse systems characterized by two phases, one following the other in time (two time axis). A new computer program is also being developed. This computer program will be capable to analyse noncoherent systems with multistate components. The mathematical theory supporting the new program is described in the paper. In particular the algorithm for the identification of the prime implicants and the theory for the calculation of the occurrence probability and of the first occurrence probability of the TOP event are discussed

  9. Object-oriented accelerator design with HPF

    International Nuclear Information System (INIS)

    Ji Qiang; Ryne, R.D.; Habib, S.

    1998-01-01

    In this paper, object-oriented design is applied to codes for beam dynamics simulations in accelerators using High Performance Fortran (HPF). This results in good maintainability, reusability, and extensibility of software, combined with the ease of parallel programming provided by HPF

  10. Computer Application Of Object Oriented Database Management ...

    African Journals Online (AJOL)

    Object Oriented Systems (OOS) have been widely adopted in software engineering because of their superiority with respect to data extensibility. The present trend in the software engineering process (SEP) towards concurrent computing raises novel concerns for the facilities and technology available in database ...

  11. Object Oriented Modelling and Dynamical Simulation

    DEFF Research Database (Denmark)

    Wagner, Falko Jens; Poulsen, Mikael Zebbelin

    1998-01-01

    This report with appendix describes the work done in master project at DTU.The goal of the project was to develop a concept for simulation of dynamical systems based on object oriented methods.The result was a library of C++-classes, for use when both building componentbased models and when...

  12. Object-oriented analysis and design

    CERN Document Server

    Deacon, John

    2005-01-01

    John Deacon’s in-depth, highly pragmatic approach to object-oriented analysis and design, demonstrates how to lay the foundations for developing the best possible software. Students will learn how to ensure that analysis and design remain focused and productive. By working through the book, they will gain a solid working knowledge of best practices in software development.

  13. Aguide to Matlab object-oriented programming

    CERN Document Server

    Register, Andy H

    2007-01-01

    This is the first book to deliver broad coverage of the documented and undocumented object-oriented features of MATLAB®. Unlike the typical approach of other resources, this guide explains why each feature is important, demonstrates how each feature is used, and promotes an understanding of the interactions between features.

  14. Object-oriented accelerator design with HPF

    Energy Technology Data Exchange (ETDEWEB)

    Ji Qiang; Ryne, R.D.; Habib, S.

    1998-12-31

    In this paper, object-oriented design is applied to codes for beam dynamics simulations in accelerators using High Performance Fortran (HPF). This results in good maintainability, reusability, and extensibility of software, combined with the ease of parallel programming provided by HPF.

  15. A Semantics of Object-Oriented Sets

    NARCIS (Netherlands)

    Balsters, H.; de Vreeze, C.C.; de Vreeze, C.C.

    An account is given of extending the well-known object-oriented type system of Luca Cardelli with set constructs and logical formalism. The system is based on typed &lgr;-notation, employing a subtyping relation and a powertype construct. Sets in this system are value expressions and are typed as

  16. Strategic Directions in Object-Oriented Programming

    NARCIS (Netherlands)

    Aksit, Mehmet; Guerroui, Rachid

    1996-01-01

    This paper has provided an overview of the field of object-oriented programming. After presenting a historical perspective and some major achievements in the field, four research directions were introduced: technologies integration, software components, distributed programming, and new paradigms. In

  17. Automating Object-Oriented Software Development Methods

    NARCIS (Netherlands)

    Tekinerdogan, B.; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel; Tekinerdogan, B.; van den Broek, P.M.; Saeki, M.; Hruby, P.; Sunye, G.

    2001-01-01

    Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

  18. Automating Object-Oriented Software Development Methods

    NARCIS (Netherlands)

    Tekinerdogan, B.; Frohner, A´ kos; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel

    2002-01-01

    Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

  19. Appropriate language for introducing object oriented programming ...

    African Journals Online (AJOL)

    Object Oriented Programming (OOP) has attained a level of acceptance in the software development community so much so that one is now considered a charlatan to have a degree in computing without the flare for OOP. Computing students must therefore be equipped with this skill. The need to do this using the most ...

  20. GUI and Object Oriented Programming in COBOL.

    Science.gov (United States)

    Lorents, Alden C.

    Various schools are struggling with the introduction of Object Oriented (OO) programming concepts and GUI (graphical user interfaces) within the traditional COBOL sequence. OO programming has been introduced in some of the curricula with languages such as C++, Smalltalk, and Java. Introducing OO programming into a typical COBOL sequence presents…

  1. Integrated system fault diagnostics utilising digraph and fault tree-based approaches

    International Nuclear Information System (INIS)

    Bartlett, L.M.; Hurdle, E.E.; Kelly, E.M.

    2009-01-01

    With the growing intolerance to failures within systems, the issue of fault diagnosis has become ever prevalent. Information concerning these possible failures can help to minimise the disruption to the functionality of the system by allowing quick rectification. Traditional approaches to fault diagnosis within engineering systems have focused on sequential testing procedures and real-time mechanisms. Both methods have been predominantly limited to single fault causes. Latest approaches also consider the issue of multiple faults in reflection to the characteristics of modern day systems designed for high reliability. In addition, a diagnostic capability is required in real time and for changeable system functionality. This paper focuses on two approaches which have been developed to cater for the demands of diagnosis within current engineering systems, namely application of the fault tree analysis technique and the method of digraphs. Both use a comparative approach to consider differences between actual system behaviour and that expected. The procedural guidelines are discussed for each method, with an experimental aircraft fuel system used to test and demonstrate the features of the techniques. The effectiveness of the approaches is compared and their future potential highlighted

  2. Users' manual for fault tree analysis code: CUT-TD

    International Nuclear Information System (INIS)

    Watanabe, Norio; Kiyota, Mikio.

    1992-06-01

    The CUT-TD code has been developed to find minimal cut sets for a given fault tree and to calculate the occurrence probability of its top event. This code uses an improved top-down algorithm which can enhance the efficiency in deriving minimal cut sets. The features in processing techniques incorporated into CUT-TD are as follows: (1) Consecutive OR gates or consecutive AND gates can be coalesced into a single gate. As a result, this processing directly produces cut sets for the redefined single gate with each gate not being developed. (2) The independent subtrees are automatically identified and their respective cut sets are separately found to enhance the efficiency in processing. (3) The minimal cut sets can be obtained for the top event of a fault tree by combining their respective minimal cut sets for several gates of the fault tree. (4) The user can reduce the computing time for finding minimal cut sets and control the size and significance of cut sets by inputting a minimum probability cut off and/or a maximum order cut off. (5) The user can select events that need not to be further developed in the process of obtaining minimal cut sets. This option can reduce the number of minimal cut sets, save the computing time and assists the user in reviewing the result. (6) Computing time is monitored by the CUT-TD code so that it can prevent the running job from abnormally ending due to excessive CPU time and produce an intermediate result. The CUT-TD code has the ability to restart the calculation with use of the intermediate result. This report provides a users' manual for the CUT-TD code. (author)

  3. Approximate estimation of system reliability via fault trees

    International Nuclear Information System (INIS)

    Dutuit, Y.; Rauzy, A.

    2005-01-01

    In this article, we show how fault tree analysis, carried out by means of binary decision diagrams (BDD), is able to approximate reliability of systems made of independent repairable components with a good accuracy and a good efficiency. We consider four algorithms: the Murchland lower bound, the Barlow-Proschan lower bound, the Vesely full approximation and the Vesely asymptotic approximation. For each of these algorithms, we consider an implementation based on the classical minimal cut sets/rare events approach and another one relying on the BDD technology. We present numerical results obtained with both approaches on various examples

  4. Waste Management Fault Tree Data Bank (WM): 1992 status report

    International Nuclear Information System (INIS)

    Baughman, D.F.; Hang, P.; Townsend, C.S.

    1993-01-01

    The Risk Assessment Methodology Group (RAM) of the Nuclear Process Safety Research Section (NPSR) maintains a compilation of incidents that have occurred in the Waste Management facilities. The Waste Management Fault Tree Data Bank (WM) contains more than 35,000 entries ranging from minor equipment malfunctions to incidents with significant potential for injury or contamination of personnel. This report documents the status of the WM data bank including: availability, training, source of data, search options, and usage, to which these data have been applied. Periodic updates to this memorandum are planned as additional data or applications are acquired

  5. Algorithm for finding minimal cut sets in a fault tree

    International Nuclear Information System (INIS)

    Rosenberg, Ladislav

    1996-01-01

    This paper presents several algorithms that have been used in a computer code for fault-tree analysing by the minimal cut sets method. The main algorithm is the more efficient version of the new CARA algorithm, which finds minimal cut sets with an auxiliary dynamical structure. The presented algorithm for finding the minimal cut sets enables one to do so by defined requirements - according to the order of minimal cut sets, or to the number of minimal cut sets, or both. This algorithm is from three to six times faster when compared with the primary version of the CARA algorithm

  6. A computer-oriented approach to fault-tree construction. Topical report No. 1

    International Nuclear Information System (INIS)

    Chu, B.B.

    1976-11-01

    Fault Tree Analysis is one of the major tools for the safety and reliability analysis of large systems. A methodology for systematically constructing fault trees for general complex systems is developed and applied, via the computer program CAT, to several systems. First, a means of representing component behavior by decision tables is presented. In order to use these tables, a procedure for constructing and editing fault trees, either manually or by computer, is described. In order to verify the methodology the computer program CAT has been developed and used to construct fault trees for two systems

  7. Use of fault and decision tree analyses to protect against industrial sabotage

    International Nuclear Information System (INIS)

    Fullwood, R.R.; Erdmann, R.C.

    1975-01-01

    Fault tree and decision tree analyses provide systematic bases for evaluation of safety systems and procedures. Heuristically, this paper shows applications of these methods for industrial sabotage analysis at a reprocessing plant. Fault trees constructed by ''leak path'' analysis for completeness through path inventory. The escape fault tree is readily developed by this method and using the reciprocal character of the trees, the attack fault tree is constructed. After construction, the events on the fault tree are corrected for their nonreciprocal character. The fault trees are algebraically solved and the protection that is afforded is ranked by the number of barriers that must be penetrated. No attempt is made to assess the barrier penetration probabilities or penetration time duration. Event trees are useful for dynamic plant protection analysis through their time-sequencing character. To illustrate their usefulness, a simple attack scenario is devised and event-tree analyzed. Two saboteur success paths and 21 failure paths are found. This example clearly shows the event tree usefulness for concisely presenting the time sequencing of key decision points. However, event trees have the disadvantage of being scenario dependent, therefore requiring a separate event tree for each scenario

  8. A Method to Quantify Plant Availability and Initiating Event Frequency Using a Large Event Tree, Small Fault Tree Model

    International Nuclear Information System (INIS)

    Kee, Ernest J.; Sun, Alice; Rodgers, Shawn; Popova, ElmiraV; Nelson, Paul; Moiseytseva, Vera; Wang, Eric

    2006-01-01

    South Texas Project uses a large fault tree to produce scenarios (minimal cut sets) used in quantification of plant availability and event frequency predictions. On the other hand, the South Texas Project probabilistic risk assessment model uses a large event tree, small fault tree for quantifying core damage and radioactive release frequency predictions. The South Texas Project is converting its availability and event frequency model to use a large event tree, small fault in an effort to streamline application support and to provide additional detail in results. The availability and event frequency model as well as the applications it supports (maintenance and operational risk management, system engineering health assessment, preventive maintenance optimization, and RIAM) are briefly described. A methodology to perform availability modeling in a large event tree, small fault tree framework is described in detail. How the methodology can be used to support South Texas Project maintenance and operations risk management is described in detail. Differences with other fault tree methods and other recently proposed methods are discussed in detail. While the methods described are novel to the South Texas Project Risk Management program and to large event tree, small fault tree models, concepts in the area of application support and availability modeling have wider applicability to the industry. (authors)

  9. APPLICATION OF OBJECT ORIENTED PROGRAMMING TECHNIQUES IN FRONT END COMPUTERS

    International Nuclear Information System (INIS)

    SKELLY, J.F.

    1997-01-01

    The Front End Computer (FEC) environment imposes special demands on software, beyond real time performance and robustness. FEC software must manage a diverse inventory of devices with individualistic timing requirements and hardware interfaces. It must implement network services which export device access to the control system at large, interpreting a uniform network communications protocol into the specific control requirements of the individual devices. Object oriented languages provide programming techniques which neatly address these challenges, and also offer benefits in terms of maintainability and flexibility. Applications are discussed which exhibit the use of inheritance, multiple inheritance and inheritance trees, and polymorphism to address the needs of FEC software

  10. Object-Oriented Software Development Environments

    DEFF Research Database (Denmark)

    The book "Object-Oriented Environments - The Mjølner Approach" presents the collective results of the Mjølner Project. The project was set up to work on the widely recognized problems of developing, maintaining and understanding large software systems. The starting point was to use object...... and realizations User interfaces for environments and realizations Grammar-based software architectures Structure-based editing Language implementation, runtime organization, garbage collection Incremental compilation techniques...

  11. Application of subset simulation methods to dynamic fault tree analysis

    International Nuclear Information System (INIS)

    Liu Mengyun; Liu Jingquan; She Ding

    2015-01-01

    Although fault tree analysis has been implemented in the nuclear safety field over the past few decades, it was recently criticized for the inability to model the time-dependent behaviors. Several methods are proposed to overcome this disadvantage, and dynamic fault tree (DFT) has become one of the research highlights. By introducing additional dynamic gates, DFT is able to describe the dynamic behaviors like the replacement of spare components or the priority of failure events. Using Monte Carlo simulation (MCS) approach to solve DFT has obtained rising attention, because it can model the authentic behaviors of systems and avoid the limitations in the analytical method. In this paper, it provides an overview and MCS information for DFT analysis, including the sampling of basic events and the propagation rule for logic gates. When calculating rare-event probability, large amount of simulations in standard MCS are required. To improve the weakness, subset simulation (SS) approach is applied. Using the concept of conditional probability and Markov Chain Monte Carlo (MCMC) technique, the SS method is able to accelerate the efficiency of exploring the failure region. Two cases are tested to illustrate the performance of SS approach, and the numerical results suggest that it gives high efficiency when calculating complicated systems with small failure probabilities. (author)

  12. Quantile arithmetic methodology for uncertainty propagation in fault trees

    International Nuclear Information System (INIS)

    Abdelhai, M.; Ragheb, M.

    1986-01-01

    A methodology based on quantile arithmetic, the probabilistic analog to interval analysis, is proposed for the computation of uncertainties propagation in fault tree analysis. The basic events' continuous probability density functions (pdf's) are represented by equivalent discrete distributions by dividing them into a number of quantiles N. Quantile arithmetic is then used to performthe binary arithmetical operations corresponding to the logical gates in the Boolean expression of the top event expression of a given fault tree. The computational advantage of the present methodology as compared with the widely used Monte Carlo method was demonstrated for the cases of summation of M normal variables through the efficiency ratio defined as the product of the labor and error ratios. The efficiency ratio values obtained by the suggested methodology for M = 2 were 2279 for N = 5, 445 for N = 25, and 66 for N = 45 when compared with the results for 19,200 Monte Carlo samples at the 40th percentile point. Another advantage of the approach is that the exact analytical value of the median is always obtained for the top event

  13. TH-EF-BRC-03: Fault Tree Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Thomadsen, B. [University of Wisconsin (United States)

    2016-06-15

    This Hands-on Workshop will be focused on providing participants with experience with the principal tools of TG 100 and hence start to build both competence and confidence in the use of risk-based quality management techniques. The three principal tools forming the basis of TG 100’s risk analysis: Process mapping, Failure-Modes and Effects Analysis and fault-tree analysis will be introduced with a 5 minute refresher presentation and each presentation will be followed by a 30 minute small group exercise. An exercise on developing QM from the risk analysis follows. During the exercise periods, participants will apply the principles in 2 different clinical scenarios. At the conclusion of each exercise there will be ample time for participants to discuss with each other and the faculty their experience and any challenges encountered. Learning Objectives: To review the principles of Process Mapping, Failure Modes and Effects Analysis and Fault Tree Analysis. To gain familiarity with these three techniques in a small group setting. To share and discuss experiences with the three techniques with faculty and participants. Director, TreatSafely, LLC. Director, Center for the Assessment of Radiological Sciences. Occasional Consultant to the IAEA and Varian.

  14. TH-EF-BRC-03: Fault Tree Analysis

    International Nuclear Information System (INIS)

    Thomadsen, B.

    2016-01-01

    This Hands-on Workshop will be focused on providing participants with experience with the principal tools of TG 100 and hence start to build both competence and confidence in the use of risk-based quality management techniques. The three principal tools forming the basis of TG 100’s risk analysis: Process mapping, Failure-Modes and Effects Analysis and fault-tree analysis will be introduced with a 5 minute refresher presentation and each presentation will be followed by a 30 minute small group exercise. An exercise on developing QM from the risk analysis follows. During the exercise periods, participants will apply the principles in 2 different clinical scenarios. At the conclusion of each exercise there will be ample time for participants to discuss with each other and the faculty their experience and any challenges encountered. Learning Objectives: To review the principles of Process Mapping, Failure Modes and Effects Analysis and Fault Tree Analysis. To gain familiarity with these three techniques in a small group setting. To share and discuss experiences with the three techniques with faculty and participants. Director, TreatSafely, LLC. Director, Center for the Assessment of Radiological Sciences. Occasional Consultant to the IAEA and Varian.

  15. Object oriented distributed programming: studies and proposals

    International Nuclear Information System (INIS)

    Guerraoui, Rachid

    1992-01-01

    This thesis contributes to the investigation of the object concept in distributed programming. Henceforth, this programming style has become a reality in the computer science world, since it allows to increase of the availability of applications and to decrease their execution time. Nevertheless, designing a distributed application is a hard task: the various abstraction levels that must be considered hinder the software reusability and maintenance, while errors and concurrent accesses are often sources of executions incoherence. The object concept improves the software modularity, and raises the computing abstraction level. Integrating distribution related aspects into the object model brings up the issues of expressing the concurrency and maintaining the coherency. The investigation of these problems in this thesis has been guided by a major concern for the preservation of the intrinsic properties of object-orientation, and the orthogonality of the solutions given. The main contributions of the thesis are: (i) the classification, regarding modularity, of the different design alternatives for object-oriented concurrent languages; (ii) the evaluation of various transactional mechanisms in object-based concurrent languages, and the design of an atomic asynchronous communication protocol named ACS; (iii) the definition of a transaction-based object-oriented concurrent language called KAROS; (iv) the implementation of a modular framework which allows to combine in a same application, various concurrency control and error recovery mechanisms; (v) the identification of a formal property, named general atomicity, which constitutes a correctness criteria for atomic objects specifications. (author) [fr

  16. Uncertainties related to the fault tree reliability data

    International Nuclear Information System (INIS)

    Apostol, Minodora; Nitoi, Mirela; Farcasiu, M.

    2003-01-01

    Uncertainty analyses related to the fault trees evaluate the system variability which appears from the uncertainties of the basic events probabilities. Having a logical model which describes a system, to obtain outcomes means to evaluate it, using estimations for each basic event of the model. If the model has basic events that incorporate uncertainties, then the results of the model should incorporate the uncertainties of the events. Uncertainties estimation in the final result of the fault tree means first the uncertainties evaluation for the basic event probabilities and then combination of these uncertainties, to calculate the top event uncertainty. To calculate the propagating uncertainty, a knowledge of the probability density function as well as the range of possible values of the basic event probabilities is required. The following data are defined, using suitable probability density function: the components failure rates; the human error probabilities; the initiating event frequencies. It was supposed that the possible value distribution of the basic event probabilities is given by the lognormal probability density function. To know the range of possible value of the basic event probabilities, the error factor or the uncertainty factor is required. The aim of this paper is to estimate the error factor for the failure rates and for the human errors probabilities from the reliability data base used in Cernavoda Probabilistic Safety Evaluation. The top event chosen as an example is FEED3, from the Pressure and Inventory Control System. The quantitative evaluation of this top event was made by using EDFT code, developed in Institute for Nuclear Research Pitesti (INR). It was supposed that the error factors for the component failures are the same as for the failure rates. Uncertainty analysis was made with INCERT application, which uses the moment method and Monte Carlo method. The reliability data base used at INR Pitesti does not contain the error factors (ef

  17. An enhanced component connection method for conversion of fault trees to binary decision diagrams

    International Nuclear Information System (INIS)

    Remenyte-Prescott, R.; Andrews, J.D.

    2008-01-01

    Fault tree analysis (FTA) is widely applied to assess the failure probability of industrial systems. Many computer packages are available, which are based on conventional kinetic tree theory methods. When dealing with large (possibly non-coherent) fault trees, the limitations of the technique in terms of accuracy of the solutions and the efficiency of the processing time become apparent. Over recent years, the binary decision diagram (BDD) method has been developed that solves fault trees and overcomes the disadvantages of the conventional FTA approach. First of all, a fault tree for a particular system failure mode is constructed and then converted to a BDD for analysis. This paper analyses alternative methods for the fault tree to BDD conversion process. For most fault tree to BDD conversion approaches, the basic events of the fault tree are placed in an ordering. This can dramatically affect the size of the final BDD and the success of qualitative and quantitative analyses of the system. A set of rules is then applied to each gate in the fault tree to generate the BDD. An alternative approach can also be used, where BDD constructs for each of the gate types are first built and then merged to represent a parent gate. A powerful and efficient property, sub-node sharing, is also incorporated in the enhanced method proposed in this paper. Finally, a combined approach is developed taking the best features of the alternative methods. The efficiency of the techniques is analysed and discussed

  18. Comparison of event tree, fault tree and Markov methods for probabilistic safety assessment and application to accident mitigation

    International Nuclear Information System (INIS)

    James, H.; Harris, M.J.; Hall, S.F.

    1992-01-01

    Probabilistic safety assessment (PSA) is used extensively in the nuclear industry. The main stages of PSA and the traditional event tree method are described. Focussing on hydrogen explosions, an event tree model is compared to a novel Markov model and a fault tree, and unexpected implication for accident mitigation is revealed. (author)

  19. Quantitative analysis of a fault tree with priority AND gates

    International Nuclear Information System (INIS)

    Yuge, T.; Yanagi, S.

    2008-01-01

    A method for calculating the exact top event probability of a fault tree with priority AND gates and repeated basic events is proposed when the minimal cut sets are given. A priority AND gate is an AND gate where the input events must occur in a prescribed order for the occurrence of the output event. It is known that the top event probability of such a dynamic fault tree is obtained by converting the tree into an equivalent Markov model. However, this method is not realistic for a complex system model because the number of states which should be considered in the Markov analysis increases explosively as the number of basic events increases. To overcome the shortcomings of the Markov model, we propose an alternative method to obtain the top event probability in this paper. We assume that the basic events occur independently, exponentially distributed, and the component whose failure corresponds to the occurrence of the basic event is non-repairable. First, we obtain the probability of occurrence of the output event of a single priority AND gate by Markov analysis. Then, the top event probability is given by a cut set approach and the inclusion-exclusion formula. An efficient procedure to obtain the probabilities corresponding to logical products in the inclusion-exclusion formula is proposed. The logical product which is composed of two or more priority AND gates having at least one common basic event as their inputs is transformed into the sum of disjoint events which are equivalent to a priority AND gate in the procedure. Numerical examples show that our method works well for complex systems

  20. A new methodology for the computer-aided construction of fault trees

    International Nuclear Information System (INIS)

    Salem, S.L.; Apostolakis, G.E.; Okrent, D.

    1977-01-01

    A methodology for systematically constructing fault trees for general complex systems is developed. A means of modeling component behaviour via decision tables is presented, and a procedure, and a procedure for constructing and editing fault trees, either manually or by computer, is developed. The techniques employed result in a complete fault tree in standard form. In order to demonstrate the methodology, the computer program CAT was developed and is used to construct trees for a nuclear system. By analyzing and comparing these fault trees, several conclusions are reached. First, such an approach can be used to produce fault trees that accurately describe system behaviour. Second, multiple trees can be rapidly produced by defining various TOP events, including system success. Finally, the accuracy and utility of such trees is shown to depend upon the careful development of the decision table models by the analyst, and of the overall system definition itself. Thus the method is seen to be a tool for assisting in the work of fault tree construction rather than a replacement for the careful work of the fault tree analyst. (author)

  1. Condition-based fault tree analysis (CBFTA): A new method for improved fault tree analysis (FTA), reliability and safety calculations

    International Nuclear Information System (INIS)

    Shalev, Dan M.; Tiran, Joseph

    2007-01-01

    Condition-based maintenance methods have changed systems reliability in general and individual systems in particular. Yet, this change does not affect system reliability analysis. System fault tree analysis (FTA) is performed during the design phase. It uses components failure rates derived from available sources as handbooks, etc. Condition-based fault tree analysis (CBFTA) starts with the known FTA. Condition monitoring (CM) methods applied to systems (e.g. vibration analysis, oil analysis, electric current analysis, bearing CM, electric motor CM, and so forth) are used to determine updated failure rate values of sensitive components. The CBFTA method accepts updated failure rates and applies them to the FTA. The CBFTA recalculates periodically the top event (TE) failure rate (λ TE ) thus determining the probability of system failure and the probability of successful system operation-i.e. the system's reliability. FTA is a tool for enhancing system reliability during the design stages. But, it has disadvantages, mainly it does not relate to a specific system undergoing maintenance. CBFTA is tool for updating reliability values of a specific system and for calculating the residual life according to the system's monitored conditions. Using CBFTA, the original FTA is ameliorated to a practical tool for use during the system's field life phase, not just during system design phase. This paper describes the CBFTA method and its advantages are demonstrated by an example

  2. Systematic evaluation of fault trees using real-time model checker UPPAAL

    International Nuclear Information System (INIS)

    Cha, Sungdeok; Son, Hanseong; Yoo, Junbeom; Jee, Eunkyung; Seong, Poong Hyun

    2003-01-01

    Fault tree analysis, the most widely used safety analysis technique in industry, is often applied manually. Although techniques such as cutset analysis or probabilistic analysis can be applied on the fault tree to derive further insights, they are inadequate in locating flaws when failure modes in fault tree nodes are incorrectly identified or when causal relationships among failure modes are inaccurately specified. In this paper, we demonstrate that model checking technique is a powerful tool that can formally validate the accuracy of fault trees. We used a real-time model checker UPPAAL because the system we used as the case study, nuclear power emergency shutdown software named Wolsong SDS2, has real-time requirements. By translating functional requirements written in SCR-style tabular notation into timed automata, two types of properties were verified: (1) if failure mode described in a fault tree node is consistent with the system's behavioral model; and (2) whether or not a fault tree node has been accurately decomposed. A group of domain engineers with detailed technical knowledge of Wolsong SDS2 and safety analysis techniques developed fault tree used in the case study. However, model checking technique detected subtle ambiguities present in the fault tree

  3. TU-AB-BRD-03: Fault Tree Analysis

    International Nuclear Information System (INIS)

    Dunscombe, P.

    2015-01-01

    Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before a failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to

  4. TU-AB-BRD-03: Fault Tree Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Dunscombe, P. [University of Calgary (Canada)

    2015-06-15

    Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before a failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to

  5. An Object-Oriented Metaprogramming System

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann; Nørgård, Claus

    syntactic category of the language, a corresponding class is generated. The syntactic hierarchy of the grammar is mapped into a corresponding class hierarchy. This object-oriented representation of programs is further exploited by including a set of more general classes that view a program as an abstract......The Mjolner programming environment is discussed. A number of tools in this environment are metaprograms, i.e., programs that manipulate other programs. The metaprogramming system is grammar-based in the sense that a metaprogramming tool may be generated from the grammar of any language. For each...

  6. Object-oriented graphics programming in C++

    CERN Document Server

    Stevens, Roger T

    2014-01-01

    Object-Oriented Graphics Programming in C++ provides programmers with the information needed to produce realistic pictures on a PC monitor screen.The book is comprised of 20 chapters that discuss the aspects of graphics programming in C++. The book starts with a short introduction discussing the purpose of the book. It also includes the basic concepts of programming in C++ and the basic hardware requirement. Subsequent chapters cover related topics in C++ programming such as the various display modes; displaying TGA files, and the vector class. The text also tackles subjects on the processing

  7. Managing the BABAR Object Oriented Database

    International Nuclear Information System (INIS)

    Hasan, Adil

    2002-01-01

    The BaBar experiment stores its data in an Object Oriented federated database supplied by Objectivity/DB(tm). This database is currently 350TB in size and is expected to increase considerably as the experiment matures. Management of this database requires careful planning and specialized tools in order to make the data available to physicists in an efficient and timely manner. We discuss the operational issues and management tools that were developed during the previous run to deal with this vast quantity of data at SLAC

  8. Diagnosis of Constant Faults in Read-Once Contact Networks over Finite Bases using Decision Trees

    KAUST Repository

    Busbait, Monther I.

    2014-05-01

    We study the depth of decision trees for diagnosis of constant faults in read-once contact networks over finite bases. This includes diagnosis of 0-1 faults, 0 faults and 1 faults. For any finite basis, we prove a linear upper bound on the minimum depth of decision tree for diagnosis of constant faults depending on the number of edges in a contact network over that basis. Also, we obtain asymptotic bounds on the depth of decision trees for diagnosis of each type of constant faults depending on the number of edges in contact networks in the worst case per basis. We study the set of indecomposable contact networks with up to 10 edges and obtain sharp coefficients for the linear upper bound for diagnosis of constant faults in contact networks over bases of these indecomposable contact networks. We use a set of algorithms, including one that we create, to obtain the sharp coefficients.

  9. A knowledge-based approach to the evaluation of fault trees

    International Nuclear Information System (INIS)

    Hwang, Yann-Jong; Chow, Louis R.; Huang, Henry C.

    1996-01-01

    A list of critical components is useful for determining the potential problems of a complex system. However, to find this list through evaluating the fault trees is expensive and time consuming. This paper intends to propose an integrated software program which consists of a fault tree constructor, a knowledge base, and an efficient algorithm for evaluating minimal cut sets of a large fault tree. The proposed algorithm uses the approaches of top-down heuristic searching and the probability-based truncation. That makes the evaluation of fault trees obviously efficient and provides critical components for solving the potential problems in complex systems. Finally, some practical fault trees are included to illustrate the results

  10. FTREX Testing Report (Fault Tree Reliability Evaluation eXpert) Version 1.5

    International Nuclear Information System (INIS)

    Jung, Woo Sik

    2009-07-01

    In order to verify FTREX functions and to confirm the correctness of FTREX 1.5, various tests were performed 1.fault trees with negates 2.fault trees with house events 3.fault trees with multiple tops 4.fault trees with logical loops 5.fault trees with initiators, house events, negates, logical loops, and flag events By using the automated cutest propagation test, the FTREX 1.5 functions are verified. FTREX version 1.3 and later versions have capability to perform bottom-up cutset-propagation test in order check cutest status. FTREX 1.5 always generates the proper minimal cut sets. All the output cutsets of the tested problems are MCSs (Minimal Cut Sets) and have no non-minimal cutsets and improper cutsets. The improper cutsets are those that have no effect to top, have multiple initiators, or have disjoint events A * -A

  11. Fault tree synthesis for software design analysis of PLC based safety-critical systems

    International Nuclear Information System (INIS)

    Koo, S. R.; Cho, C. H.; Seong, P. H.

    2006-01-01

    As a software verification and validation should be performed for the development of PLC based safety-critical systems, a software safety analysis is also considered in line with entire software life cycle. In this paper, we propose a technique of software safety analysis in the design phase. Among various software hazard analysis techniques, fault tree analysis is most widely used for the safety analysis of nuclear power plant systems. Fault tree analysis also has the most intuitive notation and makes both qualitative and quantitative analyses possible. To analyze the design phase more effectively, we propose a technique of fault tree synthesis, along with a universal fault tree template for the architecture modules of nuclear software. Consequently, we can analyze the safety of software on the basis of fault tree synthesis. (authors)

  12. Study on reliability analysis based on multilevel flow models and fault tree method

    International Nuclear Information System (INIS)

    Chen Qiang; Yang Ming

    2014-01-01

    Multilevel flow models (MFM) and fault tree method describe the system knowledge in different forms, so the two methods express an equivalent logic of the system reliability under the same boundary conditions and assumptions. Based on this and combined with the characteristics of MFM, a method mapping MFM to fault tree was put forward, thus providing a way to establish fault tree rapidly and realizing qualitative reliability analysis based on MFM. Taking the safety injection system of pressurized water reactor nuclear power plant as an example, its MFM was established and its reliability was analyzed qualitatively. The analysis result shows that the logic of mapping MFM to fault tree is correct. The MFM is easily understood, created and modified. Compared with the traditional fault tree analysis, the workload is greatly reduced and the modeling time is saved. (authors)

  13. Fault tree analysis on BWR core spray system

    International Nuclear Information System (INIS)

    Watanabe, Norio

    1982-06-01

    Fault Trees which describe the failure modes for the Core Spray System function in the Browns Ferry Nuclear Plant (BWR 1065MWe) were developed qualitatively and quantitatively. The unavailability for the Core Spray System was estimated to be 1.2 x 10 - 3 /demand. It was found that the miscalibration of four reactor pressure sensors or the failure to open of the two inboard valves (FCV 75-25 and 75-53) could reduce system reliability significantly. It was recommended that the pressure sensors would be calibrated independently. The introduction of the redundant inboard valves could improve the system reliability. Thus this analysis method was verified useful for system analysis. The detailed test and maintenance manual and the informations on the control logic circuits of each active component are necessary for further analysis. (author)

  14. Experience in PSA fault tree modularization at the ASCO NPP

    International Nuclear Information System (INIS)

    Nos Llorens, V.; Frances Urmeneta, M.; Fraig Sureda, J.

    1995-01-01

    Probabilistic Safety Analysis (PSA) is a basic tool in decision-making for the optimization of back fittings, procedures and maintenance practices. ASCO NPP PSA was developed with a high level of detail in the models. This required considerable computer resources (long running time) to carry out the quantification. The quantification time had therefore to be flexible to allow continuous evaluation of the impact on the estimation and reduction of risk in the plant, and also to facilitate post-PSA applications. The most suitable way of achieving this flexibility was by compacting and reducing the detailed fault trees of the project by means of a modularization process. The purpose of the paper is to present the practical experience acquired with modularization carried out in the UTE UNITEC-INYPSA-EMPRESARIOS AGRUPADOS framework and the method applied, the support computer programs devised and their degree of effectiveness. (Author)

  15. Enterprise architecture availability analysis using fault trees and stakeholder interviews

    Science.gov (United States)

    Närman, Per; Franke, Ulrik; König, Johan; Buschle, Markus; Ekstedt, Mathias

    2014-01-01

    The availability of enterprise information systems is a key concern for many organisations. This article describes a method for availability analysis based on Fault Tree Analysis and constructs from the ArchiMate enterprise architecture (EA) language. To test the quality of the method, several case-studies within the banking and electrical utility industries were performed. Input data were collected through stakeholder interviews. The results from the case studies were compared with availability of log data to determine the accuracy of the method's predictions. In the five cases where accurate log data were available, the yearly downtime estimates were within eight hours from the actual downtimes. The cost of performing the analysis was low; no case study required more than 20 man-hours of work, making the method ideal for practitioners with an interest in obtaining rapid availability estimates of their enterprise information systems.

  16. Probability intervals for the top event unavailability of fault trees

    International Nuclear Information System (INIS)

    Lee, Y.T.; Apostolakis, G.E.

    1976-06-01

    The evaluation of probabilities of rare events is of major importance in the quantitative assessment of the risk from large technological systems. In particular, for nuclear power plants the complexity of the systems, their high reliability and the lack of significant statistical records have led to the extensive use of logic diagrams in the estimation of low probabilities. The estimation of probability intervals for the probability of existence of the top event of a fault tree is examined. Given the uncertainties of the primary input data, a method is described for the evaluation of the first four moments of the top event occurrence probability. These moments are then used to estimate confidence bounds by several approaches which are based on standard inequalities (e.g., Tchebycheff, Cantelli, etc.) or on empirical distributions (the Johnson family). Several examples indicate that the Johnson family of distributions yields results which are in good agreement with those produced by Monte Carlo simulation

  17. Application of fault tree analysis to fuel cell diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Yousfi Steiner, N.; Mocoteguy, P. [European Institute for Energy Research (EIFER), Karlsruhe (Germany); Hissel, D. [FEMTO-ST/ENISYS/FC LAB, UMR CNRS 6174, University of Franche-Comte, Belfort (France); Candusso, D. [IFSTTAR/FC LAB, Institute of Science and Technology for Transport, Development and Networks, Belfort (France); Marra, D.; Pianese, C.; Sorrentino, M. [Department of Industrial Engineering, University of Salerno, Fisciano (Italy)

    2012-04-15

    Reliability and lifetime are common issues for the development and commercialization of fuel cells technologies'. As a consequence, their improvement is a major challenge and the last decade has experienced a growing interest in activities that aims at understanding the degradation mechanisms and at developing fuel cell systems diagnosis tools. Fault Tree Analysis (FTA) is one of the deductive tools that allow ''linking'' an undesired state to a combination of lower-level events via a ''top-down'' approach which is mainly used in safety and reliability engineering. The objective of this paper is to give an overview of the use and the contribution of FTA to both SOFC and PEFC diagnosis. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Object oriented programming interfaces for accelerator control

    International Nuclear Information System (INIS)

    Hoff, L.T.

    1997-01-01

    Several years ago, the AGS controls group was given the task of developing software for the RHIC accelerator. Like the AGS, the RHIC control system needs to control and monitor equipment distributed around a relatively large geographic area. A local area network connects this equipment to a collection of UNIX workstations in a central control room. Similar software had been developed for the AGS about a decade earlier, but isn't well suited for RHIC use for a number of reasons. Rather than adapt the AGS software for RHIC use, the controls group opted to start with a clean slate. To develop software that would address the shortcomings of the AGS software, while preserving the useful features that evolved through years of use. A current trend in control system design is to provide an object oriented programming interface for application developers. This talk will discuss important aspects and features of object oriented application programming interfaces (APIs) for accelerator control systems, and explore why such interfaces are becoming the norm

  19. Application of Fault Tree Analysis and Fuzzy Neural Networks to Fault Diagnosis in the Internet of Things (IoT) for Aquaculture.

    Science.gov (United States)

    Chen, Yingyi; Zhen, Zhumi; Yu, Huihui; Xu, Jing

    2017-01-14

    In the Internet of Things (IoT) equipment used for aquaculture is often deployed in outdoor ponds located in remote areas. Faults occur frequently in these tough environments and the staff generally lack professional knowledge and pay a low degree of attention in these areas. Once faults happen, expert personnel must carry out maintenance outdoors. Therefore, this study presents an intelligent method for fault diagnosis based on fault tree analysis and a fuzzy neural network. In the proposed method, first, the fault tree presents a logic structure of fault symptoms and faults. Second, rules extracted from the fault trees avoid duplicate and redundancy. Third, the fuzzy neural network is applied to train the relationship mapping between fault symptoms and faults. In the aquaculture IoT, one fault can cause various fault symptoms, and one symptom can be caused by a variety of faults. Four fault relationships are obtained. Results show that one symptom-to-one fault, two symptoms-to-two faults, and two symptoms-to-one fault relationships can be rapidly diagnosed with high precision, while one symptom-to-two faults patterns perform not so well, but are still worth researching. This model implements diagnosis for most kinds of faults in the aquaculture IoT.

  20. Application of Fault Tree Analysis and Fuzzy Neural Networks to Fault Diagnosis in the Internet of Things (IoT for Aquaculture

    Directory of Open Access Journals (Sweden)

    Yingyi Chen

    2017-01-01

    Full Text Available In the Internet of Things (IoT equipment used for aquaculture is often deployed in outdoor ponds located in remote areas. Faults occur frequently in these tough environments and the staff generally lack professional knowledge and pay a low degree of attention in these areas. Once faults happen, expert personnel must carry out maintenance outdoors. Therefore, this study presents an intelligent method for fault diagnosis based on fault tree analysis and a fuzzy neural network. In the proposed method, first, the fault tree presents a logic structure of fault symptoms and faults. Second, rules extracted from the fault trees avoid duplicate and redundancy. Third, the fuzzy neural network is applied to train the relationship mapping between fault symptoms and faults. In the aquaculture IoT, one fault can cause various fault symptoms, and one symptom can be caused by a variety of faults. Four fault relationships are obtained. Results show that one symptom-to-one fault, two symptoms-to-two faults, and two symptoms-to-one fault relationships can be rapidly diagnosed with high precision, while one symptom-to-two faults patterns perform not so well, but are still worth researching. This model implements diagnosis for most kinds of faults in the aquaculture IoT.

  1. Treatment of complementary events in constructing the linked Level 1 and Level 2 fault trees

    International Nuclear Information System (INIS)

    Jo, Young G.; Ahn, Kwang-Il

    2009-01-01

    Complementary events in the event trees for a PRA model should be treated properly in order to evaluate plant risk correctly. In this paper, the characteristics of the following three different cutset generation methods were investigated first in order to find the best practical way for treating complementary events: (1) exact method which treats complementary events logically, (2) no-delete term method which does not treat complementary events at all, and (3) delete term method which treats complementary events by deleting nonsense cutsets which are generated as a result of ignoring complementary events. Then, practical methods for treating complementary events in constructing linked fault trees for Level 1 and Level 2 PRA were suggested and demonstrated. The suggested methods deal with the following selected four typical cases: (1) Case 1-an event tree event (E) is represented by a fault tree gate whose inputs consist of only fault tree gates, (2) Case 2-E is represented by a single basic event, (3) Case 3-E is represented by an OR fault tree gate which has a single basic event and a fault tree gate as inputs, and (4) Case 4-E is represented by an AND fault tree gate which has a single basic event and a fault tree gate as inputs. In the suggested methods, first the high level logic structures of event tree events are examined and restructured, if needed. Then, the delete term method, the exact method, and the combination of the two methods are applied to through Case 1 to Case 4, respectively. As a result, it is recommended to treat complementary events, using the suggested methods, before Level 1 and Level 2 PRA fault trees are coupled

  2. Treatment of complementary events in event trees in constructing linked fault trees for level 1 and level 2 PRA

    International Nuclear Information System (INIS)

    Jo, Y. G.

    2008-01-01

    Complementary events in the event trees for a PRA model should be treated properly in order to evaluate plant risk correctly. In this study, the characteristics of the following three different cut-set generation methods were investigated first in order to find the best practical way for treating complementary events: 1) exact method which treats complementary events logically, 2) no-delete term method which does not treat complementary events at all, and 3) delete term method which treats complementary events by deleting nonsense cut-sets which are generated as a result of ignoring complementary events. Then, practical methods for treating complementary events in constructing linked fault trees for level 1 and level 2 PRA in EPRI R and R workstation software environment, where CAFTA is the fault tree editor and FORTE is the cut-set engine, were suggested and demonstrated. The suggested methods deal with the following selected four typical cases: Case 1: an event tree event (E) is represented by a fault tree gate whose inputs consist of only fault tree gates, Case 2: E is represented by a single basic event, Case 3: E is represented by an OR fault tree gate which has a single basic event and a fault tree gate as inputs, and Case 4: E is represented by an AND fault tree gate which has a single basic event and a fault tree gate as inputs. In the suggested methods, first the high level logic structures of event tree events are examined and restructured, if needed. Then, the delete term method, the exact method, and the combination of the two methods are applied to Case 1, Case 2, and Cases 3 and 4, respectively. Also, it is recommended to treat complementary events, using the suggested methods, before level 1 and level 2 PRA fault trees are coupled. It should be noted that the selected four typical cases may not cover all different cases encountered in level 1 and level 2 PRA modeling. However, a process similar to the one suggested in this study may be used to find

  3. Object-oriented Matlab adaptive optics toolbox

    Science.gov (United States)

    Conan, R.; Correia, C.

    2014-08-01

    Object-Oriented Matlab Adaptive Optics (OOMAO) is a Matlab toolbox dedicated to Adaptive Optics (AO) systems. OOMAO is based on a small set of classes representing the source, atmosphere, telescope, wavefront sensor, Deformable Mirror (DM) and an imager of an AO system. This simple set of classes allows simulating Natural Guide Star (NGS) and Laser Guide Star (LGS) Single Conjugate AO (SCAO) and tomography AO systems on telescopes up to the size of the Extremely Large Telescopes (ELT). The discrete phase screens that make the atmosphere model can be of infinite size, useful for modeling system performance on large time scales. OOMAO comes with its own parametric influence function model to emulate different types of DMs. The cone effect, altitude thickness and intensity profile of LGSs are also reproduced. Both modal and zonal modeling approach are implemented. OOMAO has also an extensive library of theoretical expressions to evaluate the statistical properties of turbulence wavefronts. The main design characteristics of the OOMAO toolbox are object-oriented modularity, vectorized code and transparent parallel computing. OOMAO has been used to simulate and to design the Multi-Object AO prototype Raven at the Subaru telescope and the Laser Tomography AO system of the Giant Magellan Telescope. In this paper, a Laser Tomography AO system on an ELT is simulated with OOMAO. In the first part, we set-up the class parameters and we link the instantiated objects to create the source optical path. Then we build the tomographic reconstructor and write the script for the pseudo-open-loop controller.

  4. ANCON: A code for the evaluation of complex fault trees in personal computers

    International Nuclear Information System (INIS)

    Napoles, J.G.; Salomon, J.; Rivero, J.

    1990-01-01

    Performing probabilistic safety analysis has been recognized worldwide as one of the more effective ways for further enhancing safety of Nuclear Power Plants. The evaluation of fault trees plays a fundamental role in these analysis. Some existing limitations in RAM and execution speed of personal computers (PC) has restricted so far their use in the analysis of complex fault trees. Starting from new approaches in the data structure and other possibilities the ANCON code can evaluate complex fault trees in a PC, allowing the user to do a more comprehensive analysis of the considered system in reduced computing time

  5. Research on Fault Diagnosis for Pumping Station Based on T-S Fuzzy Fault Tree and Bayesian Network

    Directory of Open Access Journals (Sweden)

    Zhuqing Bi

    2017-01-01

    Full Text Available According to the characteristics of fault diagnosis for pumping station, such as the complex structure, multiple mappings, and numerous uncertainties, a new approach combining T-S fuzzy gate fault tree and Bayesian network (BN is proposed. On the one hand, traditional fault tree method needs the logical relationship between events and probability value of events and can only represent the events with two states. T-S fuzzy gate fault tree method can solve these disadvantages but still has weaknesses in complex reasoning and only one-way reasoning. On the other hand, the BN is suitable for fault diagnosis of pumping station because of its powerful ability to deal with uncertain information. However, it is difficult to determine the structure and conditional probability tables of the BN. Therefore, the proposed method integrates the advantages of the two methods. Finally, the feasibility of the method is verified through a fault diagnosis model of the rotor in the pumping unit, the accuracy of the method is verified by comparing with the methods based on traditional Bayesian network and BP neural network, respectively, when the historical data is sufficient, and the results are more superior to the above two when the historical data is insufficient.

  6. A Survey of Various Object Oriented Requirement Engineering Methods

    OpenAIRE

    Anandi Mahajan; Dr. Anurag Dixit

    2013-01-01

    In current years many industries have been moving to the use of object-oriented methods for the development of large scale information systems The requirement of Object Oriented approach in the development of software systems is increasing day by day. This paper is basically a survey paper on various Object-oriented requirement engineering methods. This paper contains a summary of the available Object-oriented requirement engineering methods with their relative advantages and disadvantages...

  7. A comparison between fault tree analysis and reliability graph with general gates

    International Nuclear Information System (INIS)

    Kim, Man Cheol; Seong, Poong Hyun; Jung, Woo Sik

    2004-01-01

    Currently, level-1 probabilistic safety assessment (PSA) is performed on the basis of event tree analysis and fault tree analysis. Kim and Seong developed a new method for system reliability analysis named reliability graph with general gates (RGGG). The RGGG is an extension of conventional reliability graph, and it utilizes the transformation of system structures to equivalent Bayesian networks for quantitative calculation. The RGGG is considered to be intuitive and easy-to-use while as powerful as fault tree analysis. As an example, Kim and Seong already showed that the Bayesian network model for digital plant protection system (DPPS), which is transformed from the RGGG model for DPPS, can be shown in 1 page, while the fault tree model for DPPS consists of 64 pages of fault trees. Kim and Seong also insisted that Bayesian network model for DPPS is more intuitive because the one-to-one matching between each node in the Bayesian network model and an actual component of DPPS is possible. In this paper, we are going to give a comparison between fault tree analysis and the RGGG method with two example systems. The two example systems are the recirculation of in Korean standard nuclear power plants (KSNP) and the fault tree model developed by Rauzy

  8. Object-Oriented Programming in High Schools the Turing Way.

    Science.gov (United States)

    Holt, Richard C.

    This paper proposes an approach to introducing object-oriented concepts to high school computer science students using the Object-Oriented Turing (OOT) language. Students can learn about basic object-oriented (OO) principles such as classes and inheritance by using and expanding a collection of classes that draw pictures like circles and happy…

  9. An Object-Oriented Approach to C++ Compiler Technology

    NARCIS (Netherlands)

    Sminchisescu, Cristian; Telea, Alexandru

    1999-01-01

    This paper focuses on the use of object-oriented approaches to syntactical and semantical analysis for complex object-oriented languages like C++. We are interested in these issues both from a design and implementation point of view. We implement a semantic analyzer in an object-oriented manner,

  10. SETS, Boolean Manipulation for Network Analysis and Fault Tree Analysis

    International Nuclear Information System (INIS)

    Worrell, R.B.

    1985-01-01

    Description of problem or function - SETS is used for symbolic manipulation of set (or Boolean) equations, particularly the reduction of set equations by the application of set identities. It is a flexible and efficient tool for performing probabilistic risk analysis (PRA), vital area analysis, and common cause analysis. The equation manipulation capabilities of SETS can also be used to analyze non-coherent fault trees and determine prime implicants of Boolean functions, to verify circuit design implementation, to determine minimum cost fire protection requirements for nuclear reactor plants, to obtain solutions to combinatorial optimization problems with Boolean constraints, and to determine the susceptibility of a facility to unauthorized access through nullification of sensors in its protection system. 4. Method of solution - The SETS program is used to read, interpret, and execute the statements of a SETS user program which is an algorithm that specifies the particular manipulations to be performed and the order in which they are to occur. 5. Restrictions on the complexity of the problem - Any properly formed set equation involving the set operations of union, intersection, and complement is acceptable for processing by the SETS program. Restrictions on the size of a set equation that can be processed are not absolute but rather are related to the number of terms in the disjunctive normal form of the equation, the number of literals in the equation, etc. Nevertheless, set equations involving thousands and even hundreds of thousands of terms can be processed successfully

  11. Large-coil-test-facility fault-tree analysis

    International Nuclear Information System (INIS)

    1982-01-01

    An operating-safety study is being conducted for the Large Coil Test Facility (LCTF). The purpose of this study is to provide the facility operators and users with added insight into potential problem areas that could affect the safety of personnel or the availability of equipment. This is a preliminary report, on Phase I of that study. A central feature of the study is the incorporation of engineering judgements (by LCTF personnel) into an outside, overall view of the facility. The LCTF was analyzed in terms of 32 subsystems, each of which are subject to failure from any of 15 generic failure initiators. The study identified approximately 40 primary areas of concern which were subjected to a computer analysis as an aid in understanding the complex subsystem interactions that can occur within the facility. The study did not analyze in detail the internal structure of the subsystems at the individual component level. A companion study using traditional fault tree techniques did analyze approximately 20% of the LCTF at the component level. A comparison between these two analysis techniques is included in Section 7

  12. Public transport risk assessment through fault tree analysis

    Directory of Open Access Journals (Sweden)

    Z. Yaghoubpour

    2016-04-01

    Full Text Available This study focused on the public transport risk assessment in District one of ​​Tehran through Fault Tree Analysis involving the three criteria of human, vehicle and road in Haddon matrix. In fact, it examined the factors contributing to the occurrence of road accidents at several urban black spots within District 1. Relying on road safety checklists and survey of experts, this study made an effort to help urban managers to assess the risks in the public transport and prevent road accidents. Finally, the risk identification and assessment of public transport in District one yielded several results to answer the research questions. The hypotheses analysis suggested that safety issues involved in public transport are concerned by urban managers. The key reactive measures are investigation of accidents, identification of causes and correction of black spots. In addition to high costs, however, the reactive measures give rise to multiple operational problems such as traffic navigation and guaranteeing user safety in every operation. The case study highlighted the same fact. The macro-level management in the metropolis of Tehran is critical. The urban road casualties and losses can be curtailed by preventive measures such as continuous assessment of road safety.

  13. BACFIRE, Minimal Cut Sets Common Cause Failure Fault Tree Analysis

    International Nuclear Information System (INIS)

    Fussell, J.B.

    1983-01-01

    1 - Description of problem or function: BACFIRE, designed to aid in common cause failure analysis, searches among the basic events of a minimal cut set of the system logic model for common potential causes of failure. The potential cause of failure is called a qualitative failure characteristics. The algorithm searches qualitative failure characteristics (that are part of the program input) of the basic events contained in a set to find those characteristics common to all basic events. This search is repeated for all cut sets input to the program. Common cause failure analysis is thereby performed without inclusion of secondary failure in the system logic model. By using BACFIRE, a common cause failure analysis can be added to an existing system safety and reliability analysis. 2 - Method of solution: BACFIRE searches the qualitative failure characteristics of the basic events contained in the fault tree minimal cut set to find those characteristics common to all basic events by either of two criteria. The first criterion can be met if all the basic events in a minimal cut set are associated by a condition which alone may increase the probability of multiple component malfunction. The second criterion is met if all the basic events in a minimal cut set are susceptible to the same secondary failure cause and are located in the same domain for that cause of secondary failure. 3 - Restrictions on the complexity of the problem - Maxima of: 1001 secondary failure maps, 101 basic events, 10 cut sets

  14. FTA, Fault Tree Analysis for Minimal Cut Sets, Graphics for CALCOMP

    International Nuclear Information System (INIS)

    Van Slyke, W.J.; Griffing, D.E.; Diven, J.

    1978-01-01

    1 - Description of problem or function: The FTA (Fault Tree Analysis) system was designed to predict probabilities of the modes of failure for complex systems and to graphically present the structure of systems. There are three programs in the system. Program ALLCUTS performs the calculations. Program KILMER constructs a CalComp plot file of the system fault tree. Program BRANCH builds a cross-reference list of the system fault tree. 2 - Method of solution: ALLCUTS employs a top-down set expansion algorithm to find fault tree cut-sets and then optionally calculates their probability using a currently accepted cut-set quantification method. The methodology is adapted from that in WASH-1400 (draft), August 1974. 3 - Restrictions on the complexity of the problem: Maxima of: 175 basic events, 425 rate events. ALLCUTS may be expanded to solve larger problems depending on available core memory

  15. Component-based modeling of systems for automated fault tree generation

    International Nuclear Information System (INIS)

    Majdara, Aref; Wakabayashi, Toshio

    2009-01-01

    One of the challenges in the field of automated fault tree construction is to find an efficient modeling approach that can support modeling of different types of systems without ignoring any necessary details. In this paper, we are going to represent a new system of modeling approach for computer-aided fault tree generation. In this method, every system model is composed of some components and different types of flows propagating through them. Each component has a function table that describes its input-output relations. For the components having different operational states, there is also a state transition table. Each component can communicate with other components in the system only through its inputs and outputs. A trace-back algorithm is proposed that can be applied to the system model to generate the required fault trees. The system modeling approach and the fault tree construction algorithm are applied to a fire sprinkler system and the results are presented

  16. NuFTA: A CASE Tool for Automatic Software Fault Tree Analysis

    International Nuclear Information System (INIS)

    Yun, Sang Hyun; Lee, Dong Ah; Yoo, Jun Beom

    2010-01-01

    Software fault tree analysis (SFTA) is widely used for analyzing software requiring high-reliability. In SFTA, experts predict failures of system through HA-ZOP (Hazard and Operability study) or FMEA (Failure Mode and Effects Analysis) and draw software fault trees about the failures. Quality and cost of the software fault tree, therefore, depend on knowledge and experience of the experts. This paper proposes a CASE tool NuFTA in order to assist experts of safety analysis. The NuFTA automatically generate software fault trees from NuSCR formal requirements specification. NuSCR is a formal specification language used for specifying software requirements of KNICS RPS (Reactor Protection System) in Korea. We used the SFTA templates proposed by in order to generate SFTA automatically. The NuFTA also generates logical formulae summarizing the failure's cause, and we have a plan to use the formulae usefully through formal verification techniques

  17. Identification of independent modules in fault trees which contain dependent basic events

    International Nuclear Information System (INIS)

    Sun, H.; Andrews, J.D.

    2004-01-01

    The reliability performance of a system is frequently a function of component failures of which some are independent whilst others are interdependent. It is possible to represent the system failure logic in a fault tree diagram, however only the sections containing independent events can be assessed using the conventional fault tree analysis methodology. The analysis of the dependent sections will require a Markov analysis. Since the efficiency of the Markov analysis largely depends on the size of the established Markov model, the key is to extract from the fault tree the smallest sections which contain dependencies. This paper proposes a method aimed at establishing the smallest Markov model for the dependencies contained within the fault tree

  18. Automatic fault tree construction with RIKKE - a compendium of examples. Vol. 2

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1982-02-01

    This second volume describes the construction of fault trees for systems with loops, including control and safety loops. It also gives a short summary of the event coding scheme used in the FTLIB component model library. (author)

  19. The boolean algebra with restricted variables as a tool for fault tree modularization

    International Nuclear Information System (INIS)

    Caldarola, L.; Wickenhaeuser, A.

    1981-08-01

    The number of minimal cut sets (m.c.s.) of very complex and highly interconnected fault trees can become extremely large (e.g. more than 10 7 ). In this case the usual analytical approach of dissecting the fault tree TOP variable into m.c.s. is not only computationally prohibitively expensive, but also meaningless because it does not offer any synthetic overview of system behavior. The method proposed in this paper overcomes the deficiencies of the analytical method. It is shown that, by applying boolean algebra with restricted variables (b.a.w.r.v.), the concept of fault tree modularization can be straightforwardly extended from a single gate to a set of gates. Thus, large fault trees are divided into smaller fault trees (modules), which are connected to each other according to a simple scheme. This scheme is represented by a block diagram in which each block is a module. The modules are analyzed separately by the m.c.s. method, and the results are combined according of the TOP event. The method allows the calculation of very large fault trees in a short time and offers a synthetic overview of systems behavior through the block diagram. Numerical examples are also included. Calculations have been carried out by using the computer code MUSTAMO, which is based on the theory developed in this paper. (orig.) [de

  20. Review: Evaluation of Foot-and-Mouth Disease Control Using Fault Tree Analysis.

    Science.gov (United States)

    Isoda, N; Kadohira, M; Sekiguchi, S; Schuppers, M; Stärk, K D C

    2015-06-01

    An outbreak of foot-and-mouth disease (FMD) causes huge economic losses and animal welfare problems. Although much can be learnt from past FMD outbreaks, several countries are not satisfied with their degree of contingency planning and aiming at more assurance that their control measures will be effective. The purpose of the present article was to develop a generic fault tree framework for the control of an FMD outbreak as a basis for systematic improvement and refinement of control activities and general preparedness. Fault trees are typically used in engineering to document pathways that can lead to an undesired event, that is, ineffective FMD control. The fault tree method allows risk managers to identify immature parts of the control system and to analyse the events or steps that will most probably delay rapid and effective disease control during a real outbreak. The present developed fault tree is generic and can be tailored to fit the specific needs of countries. For instance, the specific fault tree for the 2001 FMD outbreak in the UK was refined based on control weaknesses discussed in peer-reviewed articles. Furthermore, the specific fault tree based on the 2001 outbreak was applied to the subsequent FMD outbreak in 2007 to assess the refinement of control measures following the earlier, major outbreak. The FMD fault tree can assist risk managers to develop more refined and adequate control activities against FMD outbreaks and to find optimum strategies for rapid control. Further application using the current tree will be one of the basic measures for FMD control worldwide. © 2013 Blackwell Verlag GmbH.

  1. CAT: a computer code for the automated construction of fault trees

    International Nuclear Information System (INIS)

    Apostolakis, G.E.; Salem, S.L.; Wu, J.S.

    1978-03-01

    A computer code, CAT (Computer Automated Tree, is presented which applies decision table methods to model the behavior of components for systematic construction of fault trees. The decision tables for some commonly encountered mechanical and electrical components are developed; two nuclear subsystems, a Containment Spray Recirculation System and a Consequence Limiting Control System, are analyzed to demonstrate the applications of CAT code

  2. Teaching Object-Oriented Programming is more than teaching Object-Oriented Programming Languages

    DEFF Research Database (Denmark)

    Knudsen, Jørgen Lindskov; Madsen, Ole Lehrmann

    1988-01-01

    the research area gives additional insight into the research area and its underlying theoretical foundation. In this paper we will report on our approach to teaching programming languages as a whole and especially teaching object-oriented programming. The prime message to be told is that working from...... a theoretical foundation pays off. Without a theoretical foundation, the discussions are often centered around features of different languages. With a foundation, discussions may be conducted on solid pound. Furthermore, the students have significantly fewer difficulties in grasping the concrete programming...

  3. An ordering heuristic for building Binary Decision Diagrams for fault-trees

    Energy Technology Data Exchange (ETDEWEB)

    Bouissou, M. [Electricite de France (EDF), 75 - Paris (France)

    1997-12-31

    Binary Decision Diagrams (BDD) have recently made a noticeable entry in the RAMS field. This kind of representation for boolean functions makes possible the assessment of complex fault-trees, both qualitatively (minimal cut-sets search) and quantitatively (exact calculation of top event probability). The object of the paper is to present a pre-processing of the fault-tree which ensures that the results given by different heuristics on the `optimized` fault-tree are not too sensitive to the way the tree is written. This property is based on a theoretical proof. In contrast with some well known heuristics, the method proposed is not based only on intuition and practical experiments. (author) 12 refs.

  4. An ordering heuristic for building Binary Decision Diagrams for fault-trees

    International Nuclear Information System (INIS)

    Bouissou, M.

    1997-01-01

    Binary Decision Diagrams (BDD) have recently made a noticeable entry in the RAMS field. This kind of representation for boolean functions makes possible the assessment of complex fault-trees, both qualitatively (minimal cut-sets search) and quantitatively (exact calculation of top event probability). The object of the paper is to present a pre-processing of the fault-tree which ensures that the results given by different heuristics on the 'optimized' fault-tree are not too sensitive to the way the tree is written. This property is based on a theoretical proof. In contrast with some well known heuristics, the method proposed is not based only on intuition and practical experiments. (author)

  5. Partial Evaluation for Class-Based Object-Oriented Languages

    DEFF Research Database (Denmark)

    Schultz, Ulrik Pagh

    2001-01-01

    Object-oriented programming facilitates the development of generic software, but at a significant cost in terms of performance. We apply partial evaluation to object-oriented programs, to automatically map generic software into specific implementations. In this paper we give a concise, formal...... description of a simple partial evaluator for a minimal object-oriented language, and give directions for extending this partial evaluator to handle realistic programs....

  6. Apricot - An Object-Oriented Modeling Language for Hybrid Systems

    OpenAIRE

    Fang, Huixing; Zhu, Huibiao; Shi, Jianqi

    2013-01-01

    We propose Apricot as an object-oriented language for modeling hybrid systems. The language combines the features in domain specific language and object-oriented language, that fills the gap between design and implementation, as a result, we put forward the modeling language with simple and distinct syntax, structure and semantics. In addition, we introduce the concept of design by convention into Apricot.As the characteristic of object-oriented and the component architecture in Apricot, we c...

  7. High Performance Object-Oriented Scientific Programming in Fortran 90

    Science.gov (United States)

    Norton, Charles D.; Decyk, Viktor K.; Szymanski, Boleslaw K.

    1997-01-01

    We illustrate how Fortran 90 supports object-oriented concepts by example of plasma particle computations on the IBM SP. Our experience shows that Fortran 90 and object-oriented methodology give high performance while providing a bridge from Fortran 77 legacy codes to modern programming principles. All of our object-oriented Fortran 90 codes execute more quickly thatn the equeivalent C++ versions, yet the abstraction modelling capabilities used for scentific programming are comparably powereful.

  8. Object oriented programming in simulation of ions transport

    International Nuclear Information System (INIS)

    Zhang Wenyong; Wang Tongquan; Xiao Yabin; Dai Hongyi; Chen Yuzhong

    2001-01-01

    Using Object Oriented Programming (OOP) method can make our program more reliable and easier to read, debug, maintain and upgrade. This paper compared FORTRAN90-the language widely used in science computing with C ++ --An Object Oriented Language, and the conclusion was made that although FORTRAN90 have many deficiencies, it can be used in Object Oriented programming. Then OOP method was used in programming of Monte Carlo simulation of ions transport and the general process of OOP was given

  9. TEACHING OBJECT ORIENTED PROGRAMMING AT THE INTRODUCTORY LEVEL

    OpenAIRE

    OKUR , Prof.Dr. Mehmet C.

    2006-01-01

    Teaching object oriented programming has become a rapidly expanding preference at various educational environments. However, teachers usually experience problems when introducing object oriented concepts and programming to beginners. How to teach the fundamentals of object oriented programming at an introductory level course is still a common subject for debate. In this paper, an evaluation of these problems is presented and some possible approaches for improving the quality and success of su...

  10. Probabilistic risk assessment course documentation. Volume 4. System reliability and analysis techniques sessions B/C - event trees/fault trees

    International Nuclear Information System (INIS)

    Haasl, D.; Young, J.

    1985-08-01

    This course will employ a combination of lecture material and practical problem solving in order to develop competence and understanding of th principles and techniques of event tree and fault tree analysis. The role of these techniques in the overall context of PRA will be described. The emphasis of this course will be on the basic, traditional methods of event tree and fault tree analysis

  11. An integrated environment for developing object-oriented CAE tools

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P.; Ryba, M.; Baitinger, U.G. [Integrated System Engeneering, Stuttgart (Germany)

    1996-12-31

    This paper presents how object oriented techniques can applied to improve the development of CAE tools. For the design of modular and reusable software systems we use predefined and well tested building blocks. These building blocks are reusable software components based on object-oriented technology which allows the assembling of software systems. Today CAE tools are typically very complex and computation extensive. Therefore we need a concept, that join the advantages of the object-oriented paradigm with the advantages of parallel and distributed programming. So we present a design environment for the development of concurrent-object oriented CAE tools called CoDO.

  12. An object-oriented description method of EPMM process

    Science.gov (United States)

    Jiang, Zuo; Yang, Fan

    2017-06-01

    In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

  13. Identification of the altitudinal limit of woods through object oriented segmentation and validation using GPS survey

    Directory of Open Access Journals (Sweden)

    Giovanna Pezzi

    2008-01-01

    Full Text Available Target of this work is the definition of the upper tree limit and the identification of clumps and isolated trees above it using an object-oriented classification of aerial ortophotos. The case study is related to Mt. Giovo, in the northern Apennines. A check on the field using a GPS system was done over some sample areas to identify coordinates and to create a GPS profile of the upper tree limit and clumps of isolated trees. The goal is to “validate” in terms of quality and quantity the information on the features extracted from aerial imagery.

  14. Rolling bearing fault diagnosis using adaptive deep belief network with dual-tree complex wavelet packet.

    Science.gov (United States)

    Shao, Haidong; Jiang, Hongkai; Wang, Fuan; Wang, Yanan

    2017-07-01

    Automatic and accurate identification of rolling bearing fault categories, especially for the fault severities and compound faults, is a challenge in rotating machinery fault diagnosis. For this purpose, a novel method called adaptive deep belief network (DBN) with dual-tree complex wavelet packet (DTCWPT) is developed in this paper. DTCWPT is used to preprocess the vibration signals to refine the fault characteristics information, and an original feature set is designed from each frequency-band signal of DTCWPT. An adaptive DBN is constructed to improve the convergence rate and identification accuracy with multiple stacked adaptive restricted Boltzmann machines (RBMs). The proposed method is applied to the fault diagnosis of rolling bearings. The results confirm that the proposed method is more effective than the existing methods. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  15. Improving software requirements specification for safety-related systems using the fault tree developed by an object-based method

    International Nuclear Information System (INIS)

    Cepin, M.; Mavko, B.

    1998-01-01

    A modification of the fault tree analysis is presented. The new fault tree integrates structural and behavioral models of a system. Information on the system structure is captured in the name of each gate and basic event of the fault tree. Information on the system behavior is captured in their description. Behavior is expressed using the axiomatic notation based on first order predicate logic. The new fault tree is a useful model for analysis and improvement of software requirements specification. The benefit of such improvements is reduced probability of failures in specification, which in turn results in increased reliability of the software.(author)

  16. Object Oriented Software Development Using A Use-Cases Approach

    African Journals Online (AJOL)

    Object Oriented Software Development Using A Use-Cases Approach. ... to the analysis and design of an online banking system using the Use-Cases method of Jacobson. ... thus bringing the benefits of object orientation into important software projects. Journal of Applied Sciences and Environmental Management Vol.

  17. Parallel object-oriented term rewriting : the booleans

    NARCIS (Netherlands)

    Rodenburg, P.H.; Vrancken, J.L.M.

    As a first case study in parallel object-oriented term rewriting, we give two implementations of term rewriting algorithms for boolean terms, using the parallel object-oriented features of the language Pool-T. The term rewriting systems are specified in the specification formalism

  18. A layered semantics for a parallel object-oriented language

    NARCIS (Netherlands)

    P.H.M. America (Pierre); J.J.M.M. Rutten (Jan)

    1990-01-01

    textabstractWe develop a denotational semantics for POOL, a parallel object-oriented programming language. The main contribution of this semantics is an accurate mathematical model of the most important concept in object-oriented programming: the object. This is achieved by structuring the semantics

  19. A survey of object oriented languages in programming environments

    OpenAIRE

    Haakonsen, Harald

    1987-01-01

    Approved for public release; distribution is unlimited This thesis addresses object oriented programming languages; and a restrictive definition of object oriented programming languages is presented and defended. Differences between programming languages are discussed and related to interactive integrated programming environments. Topics related to user friendly interface to the computer system and modem programming practice are discussed. The thesis especially addresses features in ...

  20. A Comparative Analysis of Structured and Object-Oriented ...

    African Journals Online (AJOL)

    The concepts of structured and object-oriented programming methods are not relatively new but these approaches are still very much useful and relevant in today's programming paradigm. In this paper, we distinguish the features of structured programs from that of object oriented programs. Structured programming is a ...

  1. Validation techniques for object-oriented proof outlines

    NARCIS (Netherlands)

    Pierik, C.

    2006-01-01

    This thesis presents a proof outline logic for a simple object-oriented programming language. The language has all object-oriented features of popular programming languages like Java and C#. In particular, it supports inheritance, field shadowing, aliasing, dynamic object creation, subtype

  2. Teaching Adaptability of Object-Oriented Programming Language Curriculum

    Science.gov (United States)

    Zhu, Xiao-dong

    2012-01-01

    The evolution of object-oriented programming languages includes update of their own versions, update of development environments, and reform of new languages upon old languages. In this paper, the evolution analysis of object-oriented programming languages is presented in term of the characters and development. The notion of adaptive teaching upon…

  3. Object-Oriented Support for Adaptive Methods on Paranel Machines

    Directory of Open Access Journals (Sweden)

    Sandeep Bhatt

    1993-01-01

    Full Text Available This article reports on experiments from our ongoing project whose goal is to develop a C++ library which supports adaptive and irregular data structures on distributed memory supercomputers. We demonstrate the use of our abstractions in implementing "tree codes" for large-scale N-body simulations. These algorithms require dynamically evolving treelike data structures, as well as load-balancing, both of which are widely believed to make the application difficult and cumbersome to program for distributed-memory machines. The ease of writing the application code on top of our C++ library abstractions (which themselves are application independent, and the low overhead of the resulting C++ code (over hand-crafted C code supports our belief that object-oriented approaches are eminently suited to programming distributed-memory machines in a manner that (to the applications programmer is architecture-independent. Our contribution in parallel programming methodology is to identify and encapsulate general classes of communication and load-balancing strategies useful across applications and MIMD architectures. This article reports experimental results from simulations of half a million particles using multiple methods.

  4. Fault tree analysis of the manufacturing process of nuclear fuel containers

    International Nuclear Information System (INIS)

    Liao Weixian; Men Dechun; Sui Yuxue

    1998-08-01

    The nuclear fuel container consists of barrel body, bottom, cover, locking ring, rubber seal ring, and so on. It should be kept sealed in transportation and storage, so keeps the fuel contained from leakage. Its manufacturing process includes blanking, forming, seam welding, assembling, derusting and painting. The seam welding and assembling of barrel body and bottom are two key procedures, and the slope grinding, barrel body flaring and deep drawing of the bottom are important procedures. Faults in the manufacturing process of the nuclear fuel containers are investigated in details as for its quality requirements. A fault tree is established with products being unqualified as the top event. Five causes resulting in process faults are classified and analysed, and some measures are suggested for controlling different failures in manufacturing. More research work should be conducted in rules how to set up fault trees for manufacturing process

  5. An object-oriented approach to energy-economic modeling

    Energy Technology Data Exchange (ETDEWEB)

    Wise, M.A.; Fox, J.A.; Sands, R.D.

    1993-12-01

    In this paper, the authors discuss the experiences in creating an object-oriented economic model of the U.S. energy and agriculture markets. After a discussion of some central concepts, they provide an overview of the model, focusing on the methodology of designing an object-oriented class hierarchy specification based on standard microeconomic production functions. The evolution of the model from the class definition stage to programming it in C++, a standard object-oriented programming language, will be detailed. The authors then discuss the main differences between writing the object-oriented program versus a procedure-oriented program of the same model. Finally, they conclude with a discussion of the advantages and limitations of the object-oriented approach based on the experience in building energy-economic models with procedure-oriented approaches and languages.

  6. Fault tree analysis of loss of cooling to a HALW storage tank

    International Nuclear Information System (INIS)

    Nomura, Yasushi

    1992-01-01

    Results of a scenario identification, a fault tree construction and an analysis for a loss of cooling accident in a High Activity Liquid Waste (HALW) tank of a typical model of reprocessing facility, is rendered together with considerations of the system reliability improvement by changing the model design. Model plant data, basic failure frequency data and a fault tree analysis named FTL have been introduced from NUKEM GmbH, Germany. They are throughly reviewed and reevaluated at JAERI, and improved to apply to Japanese facilities. A general systematic method for constructing fault trees is used to avoid missing scenarios, thus all of the 10 conceivable accident scenarios for 'HALW storage tank without cooling, HALW boiling' are identified, and a total failure frequency are calculated to be in the 90 % confidence interval of (1.1 ∼ 5.8) x 10 -6 /yr for the German model plant. (author)

  7. Fault Tree Analysis for an Inspection Robot in a Nuclear Power Plant

    Science.gov (United States)

    Ferguson, Thomas A.; Lu, Lixuan

    2017-09-01

    The life extension of current nuclear reactors has led to an increasing demand on inspection and maintenance of critical reactor components that are too expensive to replace. To reduce the exposure dosage to workers, robotics have become an attractive alternative as a preventative safety tool in nuclear power plants. It is crucial to understand the reliability of these robots in order to increase the veracity and confidence of their results. This study presents the Fault Tree (FT) analysis to a coolant outlet piper snake-arm inspection robot in a nuclear power plant. Fault trees were constructed for a qualitative analysis to determine the reliability of the robot. Insight on the applicability of fault tree methods for inspection robotics in the nuclear industry is gained through this investigation.

  8. Transforming incomplete fault tree to Ishikawa diagram as an alternative method for technology transfer

    Science.gov (United States)

    Batzias, Dimitris F.

    2012-12-01

    Fault Tree Analysis (FTA) can be used for technology transfer when the relevant problem (called 'top even' in FTA) is solved in a technology centre and the results are diffused to interested parties (usually Small Medium Enterprises - SMEs) that have not the proper equipment and the required know-how to solve the problem by their own. Nevertheless, there is a significant drawback in this procedure: the information usually provided by the SMEs to the technology centre, about production conditions and corresponding quality characteristics of the product, and (sometimes) the relevant expertise in the Knowledge Base of this centre may be inadequate to form a complete fault tree. Since such cases are quite frequent in practice, we have developed a methodology for transforming incomplete fault tree to Ishikawa diagram, which is more flexible and less strict in establishing causal chains, because it uses a surface phenomenological level with a limited number of categories of faults. On the other hand, such an Ishikawa diagram can be extended to simulate a fault tree as relevant knowledge increases. An implementation of this transformation, referring to anodization of aluminium, is presented.

  9. Structural system reliability calculation using a probabilistic fault tree analysis method

    Science.gov (United States)

    Torng, T. Y.; Wu, Y.-T.; Millwater, H. R.

    1992-01-01

    The development of a new probabilistic fault tree analysis (PFTA) method for calculating structural system reliability is summarized. The proposed PFTA procedure includes: developing a fault tree to represent the complex structural system, constructing an approximation function for each bottom event, determining a dominant sampling sequence for all bottom events, and calculating the system reliability using an adaptive importance sampling method. PFTA is suitable for complicated structural problems that require computer-intensive computer calculations. A computer program has been developed to implement the PFTA.

  10. A Weibull-based compositional approach for hierarchical dynamic fault trees

    International Nuclear Information System (INIS)

    Chiacchio, F.; Cacioppo, M.; D'Urso, D.; Manno, G.; Trapani, N.; Compagno, L.

    2013-01-01

    The solution of a dynamic fault tree (DFT) for the reliability assessment can be achieved using a wide variety of techniques. These techniques have a strong theoretical foundation as both the analytical and the simulation methods have been extensively developed. Nevertheless, they all present the same limits that appear with the increasing of the size of the fault trees (i.e., state space explosion, time-consuming simulations), compromising the resolution. We have tested the feasibility of a composition algorithm based on a Weibull distribution, addressed to the resolution of a general class of dynamic fault trees characterized by non-repairable basic events and generally distributed failure times. The proposed composition algorithm is used to generalize the traditional hierarchical technique that, as previous literature have extensively confirmed, is able to reduce the computational effort of a large DFT through the modularization of independent parts of the tree. The results of this study are achieved both through simulation and analytical techniques, thus confirming the capability to solve a quite general class of dynamic fault trees and overcome the limits of traditional techniques.

  11. Decision table development and application to the construction of fault trees

    International Nuclear Information System (INIS)

    Salem, S.L.; Wu, J.S.; Apostolakis, G.

    1979-01-01

    A systematic methodology for the construction of fault trees based on the use of decision tables has been developed. These tables are used to describe each possible output state of a component as a set of combinations of states of inputs and internal operational or T states. Two methods for modeling component behavior via decision tables have been developed, one inductive and one deductive. These methods are useful for creating decision tables that realistically model the operational and failure modes of electrical, mechanical, and hydraulic components as well as human interactions inhibit conditions and common-cause events. A computer code CAT (Computer Automated Tree) has been developed to automatically produce fault trees from decision tables. A simple electrical system was chosen to illustrate the basic features of the decision table approach and to provide an example of an actual fault tree produced by this code. This example demonstrates the potential utility of such an automated approach to fault tree construction once a basic set of general decision tables has been developed

  12. Reliability Analysis of Operation for Cableways by FTA (Fault Tree Analysis Method

    Directory of Open Access Journals (Sweden)

    Sergej Težak

    2010-05-01

    Full Text Available This paper examines the reliability of the operation of cableway systems in Slovenia, which has major impact on the quality of service in the mountain tourism, mainly in wintertime. Different types of cableway installations in Slovenia were captured in a sample and fault tree analysis (FTA was made on the basis of the obtained data. The paper presents the results of the analysis. With these results it is possible to determine the probability of faults of different types of cableways, which types of faults have the greatest impact on the termination of operation, which components of cableways fail most, what is the impact of age of cableways on the occurrence of the faults. Finally, an attempt was made to find if occurrence of faults on individual cableway installation has also impact on traffic on this cableway due to reduced quality of service. KEYWORDS: cableways, aerial ropeways, chairlifts, ski-tows, quality, faults, fault tree analysis, reliability, service quality, winter tourism, mountain tourist centre

  13. Object-oriented programming with mixins in Ada

    Science.gov (United States)

    Seidewitz, ED

    1992-01-01

    Recently, I wrote a paper discussing the lack of 'true' object-oriented programming language features in Ada 83, why one might desire them in Ada, and how they might be added in Ada 9X. The approach I took in this paper was to build the new object-oriented features of Ada 9X as much as possible on the basic constructs and philosophy of Ada 83. The object-oriented features proposed for Ada 9X, while different in detail, are based on the same kind of approach. Further consideration of this approach led me on a long reflection on the nature of object-oriented programming and its application to Ada. The results of this reflection, presented in this paper, show how a fairly natural object-oriented style can indeed be developed even in Ada 83. The exercise of developing this style is useful for at least three reasons: (1) it provides a useful style for programming object-oriented applications in Ada 83 until new features become available with Ada 9X; (2) it demystifies many of the mechanisms that seem to be 'magic' in most object-oriented programming languages by making them explicit; and (3) it points out areas that are and are not in need of change in Ada 83 to make object-oriented programming more natural in Ada 9X. In the next four sections I will address in turn the issues of object-oriented classes, mixins, self-reference and supertyping. The presentation is through a sequence of examples. This results in some overlap with that paper, but all the examples in the present paper are written entirely in Ada 83. I will return to considerations for Ada 9X in the last section of the paper.

  14. The constant failure rate model for fault tree evaluation as a tool for unit protection reliability assessment

    International Nuclear Information System (INIS)

    Vichev, S.; Bogdanov, D.

    2000-01-01

    The purpose of this paper is to introduce the fault tree analysis method as a tool for unit protection reliability estimation. The constant failure rate model applies for making reliability assessment, and especially availability assessment. For that purpose an example for unit primary equipment structure and fault tree example for simplified unit protection system is presented (author)

  15. A Configurable, Object-Oriented, Transportation System Software Framework

    Energy Technology Data Exchange (ETDEWEB)

    KELLY,SUZANNE M.; MYRE,JOHN W.; PRICE,MARK H.; RUSSELL,ERIC D.; SCOTT,DAN W.

    2000-08-01

    The Transportation Surety Center, 6300, has been conducting continuing research into and development of information systems for the Configurable Transportation Security and Information Management System (CTSS) project, an Object-Oriented Framework approach that uses Component-Based Software Development to facilitate rapid deployment of new systems while improving software cost containment, development reliability, compatibility, and extensibility. The direction has been to develop a Fleet Management System (FMS) framework using object-oriented technology. The goal for the current development is to provide a software and hardware environment that will demonstrate and support object-oriented development commonly in the FMS Central Command Center and Vehicle domains.

  16. On Converting Software Systems to Object Oriented Architectures

    Directory of Open Access Journals (Sweden)

    Gabriela Czibula

    2010-06-01

    Full Text Available Object-oriented concepts are useful concerning the reuse of existing software. Therefore a transformation of procedural programs to objectoriented architectures becomes an important process to enhance the reuse of procedural programs. Moreover, it would be useful to assist by automatic methods the software developers in transforming procedural code into an equivalent
    object-oriented one. In this paper we aim at introducing a hierarchical clustering algorithm that can be used for assisting software developers in the process of transforming procedural code into an object-oriented architecture.

  17. Object-oriented Programming Laws for Annotated Java Programs

    Directory of Open Access Journals (Sweden)

    Gabriel Falconieri Freitas

    2010-03-01

    Full Text Available Object-oriented programming laws have been proposed in the context of languages that are not combined with a behavioral interface specification language (BISL. The strong dependence between source-code and interface specifications may cause a number of difficulties when transforming programs. In this paper we introduce a set of programming laws for object-oriented languages like Java combined with the Java Modeling Language (JML. The set of laws deals with object-oriented features taking into account their specifications. Some laws deal only with features of the specification language. These laws constitute a set of small transformations for the development of more elaborate ones like refactorings.

  18. Event and fault tree model for reliability analysis of the greek research reactor

    International Nuclear Information System (INIS)

    Albuquerque, Tob R.; Guimaraes, Antonio C.F.; Moreira, Maria de Lourdes

    2013-01-01

    Fault trees and event trees are widely used in industry to model and to evaluate the reliability of safety systems. Detailed analyzes in nuclear installations require the combination of these two techniques. This work uses the methods of fault tree (FT) and event tree (ET) to perform the Probabilistic Safety Assessment (PSA) in research reactors. The PSA according to IAEA (International Atomic Energy Agency) is divided into Level 1, Level 2 and level 3. At Level 1, conceptually safety systems act to prevent the accident, at Level 2, the accident occurred and seeks to minimize the consequences, known as stage management of the accident, and at Level 3 are determined consequences. This paper focuses on Level 1 studies, and searches through the acquisition of knowledge consolidation of methodologies for future reliability studies. The Greek Research Reactor, GRR - 1, was used as a case example. The LOCA (Loss of Coolant Accident) was chosen as the initiating event and from there were developed the possible accident sequences, using event tree, which could lead damage to the core. Furthermore, for each of the affected systems, the possible accidents sequences were made fault tree and evaluated the probability of each event top of the FT. The studies were conducted using a commercial computational tool SAPHIRE. The results thus obtained, performance or failure to act of the systems analyzed were considered satisfactory. This work is directed to the Greek Research Reactor due to data availability. (author)

  19. Event and fault tree model for reliability analysis of the greek research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Albuquerque, Tob R.; Guimaraes, Antonio C.F.; Moreira, Maria de Lourdes, E-mail: atalbuquerque@ien.gov.br, E-mail: btony@ien.gov.br, E-mail: malu@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    Fault trees and event trees are widely used in industry to model and to evaluate the reliability of safety systems. Detailed analyzes in nuclear installations require the combination of these two techniques. This work uses the methods of fault tree (FT) and event tree (ET) to perform the Probabilistic Safety Assessment (PSA) in research reactors. The PSA according to IAEA (International Atomic Energy Agency) is divided into Level 1, Level 2 and level 3. At Level 1, conceptually safety systems act to prevent the accident, at Level 2, the accident occurred and seeks to minimize the consequences, known as stage management of the accident, and at Level 3 are determined consequences. This paper focuses on Level 1 studies, and searches through the acquisition of knowledge consolidation of methodologies for future reliability studies. The Greek Research Reactor, GRR - 1, was used as a case example. The LOCA (Loss of Coolant Accident) was chosen as the initiating event and from there were developed the possible accident sequences, using event tree, which could lead damage to the core. Furthermore, for each of the affected systems, the possible accidents sequences were made fault tree and evaluated the probability of each event top of the FT. The studies were conducted using a commercial computational tool SAPHIRE. The results thus obtained, performance or failure to act of the systems analyzed were considered satisfactory. This work is directed to the Greek Research Reactor due to data availability. (author)

  20. 31 OBJECTIVE ORIENTED PROBLEM SOLVING A Case Study ...

    African Journals Online (AJOL)

    succeed but which are not Wlder the direct control of the activities ..... Frequent failure of electrical machines due to intenuption .... suffers high attribution rate of skilled personnel and as a result is .... Management and Objective Oriented Project.

  1. Object-Oriented Modular Architecture for Ground Combat Simulation

    National Research Council Canada - National Science Library

    Luqi; Berzins, V; Shing, M; Saluto, M; Williams, J

    2000-01-01

    .... It describes the effective use of computer-aided prototyping techniques for re-engineering the legacy software to develop an object-oriented modular architecture for the Janus combat simulation system. Janus...

  2. Object-Oriented Approach to Manipulating Acoustic and Seismic Spectra

    National Research Council Canada - National Science Library

    Wilson, D. K; Torrey, Jacob I

    2006-01-01

    The software design and underlying mathematics for an object-oriented, Java-based approach to creating and manipulating frequency-dependent functions, such as power spectral densities, is described...

  3. Software bug prediction using object-oriented metrics

    Indian Academy of Sciences (India)

    Dharmendra Lal Gupta

    2 Department of Computer Science and Engineering, Mewar University, Chittorgarh 312901, India e-mail: ... the object-oriented technology has been widely accepted ... whereas project metrics cover the number of staff members involved in ...

  4. Rich Interfaces for Dependability: Compositional Methods for Dynamic Fault Trees and Arcade models

    NARCIS (Netherlands)

    Boudali, H.; Crouzen, Pepijn; Haverkort, Boudewijn R.H.M.; Kuntz, G.W.M.; Stoelinga, Mariëlle Ida Antoinette

    This paper discusses two behavioural interfaces for reliability analysis: dynamic fault trees, which model the system reliability in terms of the reliability of its components and Arcade, which models the system reliability at an architectural level. For both formalisms, the reliability is analyzed

  5. Fault tree and failure mode and effects analysis of a digital safety function

    International Nuclear Information System (INIS)

    Maskuniitty, M.; Pulkkinen, U.

    1995-01-01

    The principles of fault tree and failure mode and effects analysis (FMEA) for the analysis of digital safety functions of nuclear power plants are discussed. Based on experiences from a case study, a proposal for a full scale analysis is presented. The feasibility and applicability the above mentioned reliability engineering methods are discussed. (author). 13 refs, 1 fig., 2 tabs

  6. On the use of non-coherent fault trees in safety and security studies

    International Nuclear Information System (INIS)

    Contini, S.; Cojazzi, G.G.M.; Renda, G.

    2008-01-01

    This paper gives some insights on the usefulness of non-coherent fault trees in system modelling from both the point of view of safety and security. A safety-related system can evolve from the working states to failed states through degraded states, i.e. working state, but in a degraded mode. In practical applications the degraded states may be of particular interest due e.g. to the associated risk increase or the different types of consequent actions. The top events definitions of such states contain the working conditions of some sub-systems/components. How the use of non-coherent fault trees can greatly simplify both the modelling and quantification of these states is shown in this paper. Some considerations about the interpretation of the importance indexes of negated basic events are also briefly described. When dealing with security applications, there is a need to cope not only with stochastic events, such as component failures and human errors, but also with deliberate intentional actions, whose successes might be characterised by high probability values. Different mutually exclusive attack scenarios may be envisaged for a given system. Hence, the essential feature of a fault tree analyser is the capability to determine the exact value of the top event probability containing mutually exclusive events. It is also shown that in these cases the use of non-coherent fault trees allows solving the problem with limited effort

  7. Making systems with mutually exclusive events analysable by standard fault tree analysis tools

    International Nuclear Information System (INIS)

    Vaurio, J.K.

    2001-01-01

    Methods are developed for analysing systems that comprise mutually exclusive events by fault tree techniques that accept only statistically independent basic events. Techniques based on equivalent models and numerical transformations are presented for phased missions and for systems with component-caused system-level common cause failures. Numerical examples illustrate the methods

  8. Seismic Margin Assessment for Research Reactor using Fragility based Fault Tree Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kwag, Shinyoung; Oh, Jinho; Lee, Jong-Min; Ryu, Jeong-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The research reactor has been often subjected to external hazards during the design lifetime. Especially, a seismic event can be one of significant threats to the failure of structure system of the research reactor. This failure is possibly extended to the direct core damage of the reactor. For this purpose, the fault tree for structural system failure leading to the core damage under an earthquake accident is developed. The failure probabilities of basic events are evaluated as fragility curves of log-normal distributions. Finally, the plant-level seismic margin is investigated by the fault tree analysis combining with fragility data and the critical path is identified. The plant-level probabilistic seismic margin assessment using the fragility based fault tree analysis was performed for quantifying the safety of research reactor to a seismic hazard. For this, the fault tree for structural system failure leading to the core damage of the reactor under a seismic accident was developed. The failure probabilities of basic events were evaluated as fragility curves of log-normal distributions.

  9. A Rigorous, Compositional, and Extensible Framework for Dynamic Fault Tree Analysis

    NARCIS (Netherlands)

    Boudali, H.; Sandhu, R.; Crouzen, Pepijn; Stoelinga, Mariëlle Ida Antoinette

    Fault trees (FT) are among the most prominent formalisms for reliability analysis of technical systems. Dynamic FTs extend FTs with support for expressing dynamic dependencies among components. The standard analysis vehicle for DFTs is state-based, and treats the model as a CTMC, a continuous-time

  10. Criteria for evaluating protection from single points of failure for partially expanded fault trees

    International Nuclear Information System (INIS)

    Aswani, D.; Badreddine, B.; Malone, M.; Gauthier, G.; Proietty, J.

    2008-01-01

    Fault tree analysis (FTA) is a technique that describes the combinations of events in a system which result in an undesirable outcome. FTA is used as a tool to quantitatively assess a system's probability for an undesirable outcome. Time constraints from concept to production in modern engineering often limit the opportunity for a thorough statistical analysis of a system. Furthermore, when undesirable outcomes are considered such as hazard to human(s), it becomes difficult to identify strict statistical targets for what is acceptable. Consequently, when hazard to human(s) is concerned a common design target is to protect the system from single points of failure (SPOF) which means that no failure mode caused by a single event, concern, or error has a critical consequence on the system. Such a design target is common with 'by-wire' systems. FTA can be used to verify if a system is protected from SPOF. In this paper, sufficient criteria for evaluating protection from SPOF for partially expanded fault trees are proposed along with proof. The proposed criteria consider potential interactions between the lowest drawn events of a partial fault tree expansion which otherwise easily leads to an overly optimistic analysis of protection from SPOF. The analysis is limited to fault trees that are coherent and static

  11. Mapping and Visiting in Functional and Object-oriented Programming

    DEFF Research Database (Denmark)

    Nørmark, Kurt; Thomsen, Bent; Thomsen, Lone Leth

    2008-01-01

    Mapping and visiting represent different programming styles for traversals of collections of data.  Mapping is rooted in the functional programming paradigm, and visiting is rooted in the object-oriented programming paradigm.  This paper explores the similarities and differences between mapping...... and visiting, seen across the traditions in the two different programming paradigms. The paper is concluded with recommendations for mapping and visiting in programming languages that support both the functional and the object-oriented paradigms....

  12. Concurrent object-oriented programming: The MP-Eiffel approach

    OpenAIRE

    Silva, Miguel Augusto Mendes Oliveira e

    2004-01-01

    This article evaluates several possible approaches for integrating concurrency into object-oriented programming languages, presenting afterwards, a new language named MP-Eiffel. MP-Eiffel was designed attempting to include all the essential properties of both concurrent and object-oriented programming with simplicity and safety. A special care was taken to achieve the orthogonality of all the language mechanisms, allowing their joint use without unsafe side-effects (such as inh...

  13. Etomica: an object-oriented framework for molecular simulation.

    Science.gov (United States)

    Schultz, Andrew J; Kofke, David A

    2015-03-30

    We describe the design of an object-oriented library of software components that are suitable for constructing simulations of systems of interacting particles. The emphasis of the discussion is on the general design of the components and how they interact, and less on details of the programming interface or its implementation. Example code is provided as an aid to understanding object-oriented programming structures and to demonstrate how the framework is applied. © 2015 Wiley Periodicals, Inc.

  14. Object oriented run control for the CEBAF data acquisition system

    International Nuclear Information System (INIS)

    Quarrie, D.R.; Heyes, G.; Jastrzembski, E.; Watson, W.A. III

    1992-01-01

    After an extensive evaluation, the Eiffel object oriented language has been selected for the design and implementation of the run control portion of the CEBAF Data Acquisition System. The OSF/Motif graphical user interface toolkit and Data Views process control system have been incorporated into this framework. in this paper, the authors discuss the evaluation process, the status of the implementation and the lessons learned, particularly in the use of object oriented techniques

  15. Application of Fault Tree Analysis for Estimating Temperature Alarm Circuit Reliability

    International Nuclear Information System (INIS)

    El-Shanshoury, A.I.; El-Shanshoury, G.I.

    2011-01-01

    Fault Tree Analysis (FTA) is one of the most widely-used methods in system reliability analysis. It is a graphical technique that provides a systematic description of the combinations of possible occurrences in a system, which can result in an undesirable outcome. The presented paper deals with the application of FTA method in analyzing temperature alarm circuit. The criticality failure of this circuit comes from failing to alarm when temperature exceeds a certain limit. In order for a circuit to be safe, a detailed analysis of the faults causing circuit failure is performed by configuring fault tree diagram (qualitative analysis). Calculations of circuit quantitative reliability parameters such as Failure Rate (FR) and Mean Time between Failures (MTBF) are also done by using Relex 2009 computer program. Benefits of FTA are assessing system reliability or safety during operation, improving understanding of the system, and identifying root causes of equipment failures

  16. Fault tree construction of hybrid system requirements using qualitative formal method

    International Nuclear Information System (INIS)

    Lee, Jang-Soo; Cha, Sung-Deok

    2005-01-01

    When specifying requirements for software controlling hybrid systems and conducting safety analysis, engineers experience that requirements are often known only in qualitative terms and that existing fault tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. In this paper, we propose Causal Requirements Safety Analysis (CRSA) as a technique to qualitatively evaluate causal relationship between software faults and physical hazards. This technique, extending qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and relationship among them. Using a simplified electrical power system as an example, we describe step-by-step procedures of conducting CRSA. Our experience of applying CRSA to perform fault tree analysis on requirements for the Wolsong nuclear power plant shutdown system indicates that CRSA is an effective technique in assisting safety engineers

  17. System Analysis by Mapping a Fault-tree into a Bayesian-network

    Science.gov (United States)

    Sheng, B.; Deng, C.; Wang, Y. H.; Tang, L. H.

    2018-05-01

    In view of the limitations of fault tree analysis in reliability assessment, Bayesian Network (BN) has been studied as an alternative technology. After a brief introduction to the method for mapping a Fault Tree (FT) into an equivalent BN, equations used to calculate the structure importance degree, the probability importance degree and the critical importance degree are presented. Furthermore, the correctness of these equations is proved mathematically. Combining with an aircraft landing gear’s FT, an equivalent BN is developed and analysed. The results show that richer and more accurate information have been achieved through the BN method than the FT, which demonstrates that the BN is a superior technique in both reliability assessment and fault diagnosis.

  18. OBJECT-ORIENTED PROGRAMMING IN SCHOOL COURSE OF INFORMATICS

    Directory of Open Access Journals (Sweden)

    Хамид Абдулович Гербеков

    2017-12-01

    Full Text Available In article approaches to training of student in object-oriented programming in the environment of the Windows operating system are considered. The analysis of the literature on the programming and the modern school textbook on informatics, and also theoretical material on object-oriented programming within the informative line “Algorithmization and programming” of school course of informatics is for this purpose carried out. The object-oriented approached essentially differs from structured programming in fact that the object-oriented programming paradigm is more open and scalable. It doesn’t mean that transition to the object-oriented approach to programming demands a failure from all algorithm applied in case of structural pro-applications of all earlier found and tested method and receptions. On the contrary new elements are always based on prior experience. Object approach creates a set of essential convenience which under other conditions can’t provide. Object-oriented programming in the environment of the Windows operating system to interest student from the first lesson and to do training fascinating and interesting because student can control object which the modern students face since the childhood on the personal computers, pads and phones.

  19. DG TO FT - AUTOMATIC TRANSLATION OF DIGRAPH TO FAULT TREE MODELS

    Science.gov (United States)

    Iverson, D. L.

    1994-01-01

    Fault tree and digraph models are frequently used for system failure analysis. Both types of models represent a failure space view of the system using AND and OR nodes in a directed graph structure. Each model has its advantages. While digraphs can be derived in a fairly straightforward manner from system schematics and knowledge about component failure modes and system design, fault tree structure allows for fast processing using efficient techniques developed for tree data structures. The similarities between digraphs and fault trees permits the information encoded in the digraph to be translated into a logically equivalent fault tree. The DG TO FT translation tool will automatically translate digraph models, including those with loops or cycles, into fault tree models that have the same minimum cut set solutions as the input digraph. This tool could be useful, for example, if some parts of a system have been modeled using digraphs and others using fault trees. The digraphs could be translated and incorporated into the fault trees, allowing them to be analyzed using a number of powerful fault tree processing codes, such as cut set and quantitative solution codes. A cut set for a given node is a group of failure events that will cause the failure of the node. A minimum cut set for a node is any cut set that, if any of the failures in the set were to be removed, the occurrence of the other failures in the set will not cause the failure of the event represented by the node. Cut sets calculations can be used to find dependencies, weak links, and vital system components whose failures would cause serious systems failure. The DG TO FT translation system reads in a digraph with each node listed as a separate object in the input file. The user specifies a terminal node for the digraph that will be used as the top node of the resulting fault tree. A fault tree basic event node representing the failure of that digraph node is created and becomes a child of the terminal

  20. Comparing Two Different Approaches to the Modeling of the Common Cause Failures in Fault Trees

    International Nuclear Information System (INIS)

    Vukovic, I.; Mikulicic, V.; Vrbanic, I.

    2002-01-01

    The potential for common cause failures in systems that perform critical functions has been recognized as very important contributor to risk associated with operation of nuclear power plants. Consequentially, modeling of common cause failures (CCF) in fault trees has become one among the essential elements in any probabilistic safety assessment (PSA). Detailed and realistic representation of CCF potential in fault tree structure is sometimes very challenging task. This is especially so in the cases where a common cause group involves more than two components. During the last ten years the difficulties associated with this kind of modeling have been overcome to some degree by development of integral PSA tools with high capabilities. Some of them allow for the definition of CCF groups and their automated expanding in the process of Boolean resolution and generation of minimal cutsets. On the other hand, in PSA models developed and run by more traditional tools, CCF-potential had to be modeled in the fault trees explicitly. With explicit CCF modeling, fault trees can grow very large, especially in the cases when they involve CCF groups with 3 or more members, which can become an issue for the management of fault trees and basic events with traditional non-integral PSA models. For these reasons various simplifications had to be made. Speaking in terms of an overall PSA model, there are also some other issues that need to be considered, such as maintainability and accessibility of the model. In this paper a comparison is made between the two approaches to CCF modeling. Analysis is based on a full-scope Level 1 PSA model for internal initiating events that had originally been developed by a traditional PSA tool and later transferred to a new-generation PSA tool with automated CCF modeling capabilities. Related aspects and issues mentioned above are discussed in the paper. (author)

  1. Irregular recurrence of large earthquakes along the san andreas fault: evidence from trees.

    Science.gov (United States)

    Jacoby, G C; Sheppard, P R; Sieh, K E

    1988-07-08

    Old trees growing along the San Andreas fault near Wrightwood, California, record in their annual ring-width patterns the effects of a major earthquake in the fall or winter of 1812 to 1813. Paleoseismic data and historical information indicate that this event was the "San Juan Capistrano" earthquake of 8 December 1812, with a magnitude of 7.5. The discovery that at least 12 kilometers of the Mojave segment of the San Andreas fault ruptured in 1812, only 44 years before the great January 1857 rupture, demonstrates that intervals between large earthquakes on this part of the fault are highly variable. This variability increases the uncertainty of forecasting destructive earthquakes on the basis of past behavior and accentuates the need for a more fundamental knowledge of San Andreas fault dynamics.

  2. Method of reliability allocation based on fault tree analysis and fuzzy math in nuclear power plants

    International Nuclear Information System (INIS)

    Chen Zhaobing; Deng Jian; Cao Xuewu

    2005-01-01

    Reliability allocation is a kind of a difficult multi-objective optimization problem. It can not only be applied to determine the reliability characteristic of reactor systems, subsystem and main components but also be performed to improve the design, operation and maintenance of nuclear plants. The fuzzy math known as one of the powerful tools for fuzzy optimization and the fault analysis deemed to be one of the effective methods of reliability analysis can be applied to the reliability allocation model so as to work out the problems of fuzzy characteristic of some factors and subsystem's choice respectively in this paper. Thus we develop a failure rate allocation model on the basis of the fault tree analysis and fuzzy math. For the choice of the reliability constraint factors, we choose the six important ones according to practical need for conducting the reliability allocation. The subsystem selected by the top-level fault tree analysis is to avoid allocating reliability for all the equipment and components including the unnecessary parts. During the reliability process, some factors can be calculated or measured quantitatively while others only can be assessed qualitatively by the expert rating method. So we adopt fuzzy decision and dualistic contrast to realize the reliability allocation with the help of fault tree analysis. Finally the example of the emergency diesel generator's reliability allocation is used to illustrate reliability allocation model and improve this model simple and applicable. (authors)

  3. Object oriented development of engineering software using CLIPS

    Science.gov (United States)

    Yoon, C. John

    1991-01-01

    Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

  4. RELOSS, Reliability of Safety System by Fault Tree Analysis

    International Nuclear Information System (INIS)

    Allan, R.N.; Rondiris, I.L.; Adraktas, A.

    1981-01-01

    1 - Description of problem or function: Program RELOSS is used in the reliability/safety assessment of any complex system with predetermined operational logic in qualitative and (if required) quantitative terms. The program calculates the possible system outcomes following an abnormal operating condition and the probability of occurrence, if required. Furthermore, the program deduces the minimal cut or tie sets of the system outcomes and identifies the potential common mode failures. 4. Method of solution: The reliability analysis performed by the program is based on the event tree methodology. Using this methodology, the program develops the event tree of a system or a module of that system and relates each path of this tree to its qualitative and/or quantitative impact on specified system or module outcomes. If the system being analysed is subdivided into modules the program assesses each module in turn as described previously and then combines the module information to obtain results for the overall system. Having developed the event tree of a module or a system, the program identifies which paths lead or do not lead to various outcomes depending on whether the cut or the tie sets of the outcomes are required and deduces the corresponding sets. Furthermore the program identifies for a specific system outcome, the potential common mode failures and the cut or tie sets containing potential dependent failures of some components. 5. Restrictions on the complexity of the problem: The present dimensions of the program are as follows. They can however be easily modified: Maximum number of modules (equivalent components): 25; Maximum number of components in a module: 15; Maximum number of levels of parentheses in a logical statement: 10 Maximum number of system outcomes: 3; Maximum number of module outcomes: 2; Maximum number of points in time for which quantitative analysis is required: 5; Maximum order of any cut or tie set: 10; Maximum order of a cut or tie of any

  5. An Integrated Approach of Model checking and Temporal Fault Tree for System Safety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Kwang Yong; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2009-10-15

    Digitalization of instruments and control systems in nuclear power plants offers the potential to improve plant safety and reliability through features such as increased hardware reliability and stability, and improved failure detection capability. It however makes the systems and their safety analysis more complex. Originally, safety analysis was applied to hardware system components and formal methods mainly to software. For software-controlled or digitalized systems, it is necessary to integrate both. Fault tree analysis (FTA) which has been one of the most widely used safety analysis technique in nuclear industry suffers from several drawbacks as described in. In this work, to resolve the problems, FTA and model checking are integrated to provide formal, automated and qualitative assistance to informal and/or quantitative safety analysis. Our approach proposes to build a formal model of the system together with fault trees. We introduce several temporal gates based on timed computational tree logic (TCTL) to capture absolute time behaviors of the system and to give concrete semantics to fault tree gates to reduce errors during the analysis, and use model checking technique to automate the reasoning process of FTA.

  6. Reliability Analysis of Core Protection Calculator System by Combining Petri Net and Fault Tree

    International Nuclear Information System (INIS)

    Kim, Hyejin; Kim, Jonghyun

    2013-01-01

    This paper proposes an approach to analyzing the reliability of digital systems by combining Petri net (PN) and Fault tree. The Petri net allows modeling event dependencies and interaction, to represent the time sequence, and to model assumptions for dynamic events. The Petri net model can be straightforwardly transformed to fault tree using the gate. Then, the FT can be integrated into the existing PSA. This paper applies the approach to the reliability analysis of Core Protection Calculator System (CPCS). Digital technology is replacing the analog instrumentation and control (I and C) systems in both new and upgraded nuclear power plants. As digital systems are introduced to nuclear power plants, issues related with reliability analyses of these digital systems are being raised. One of these issues is that static fault tree (FT) and event tree (ET) approach cannot properly account for dynamic interactions in the digital systems, such as multiple top events, logic loops and time delay. Many methods have been proposed to solve the problems, but there is no single method that is universally accepted for the application to the current generation probabilistic safety analysis (PSA)

  7. Reliability Analysis of Core Protection Calculator System by Combining Petri Net and Fault Tree

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyejin; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    This paper proposes an approach to analyzing the reliability of digital systems by combining Petri net (PN) and Fault tree. The Petri net allows modeling event dependencies and interaction, to represent the time sequence, and to model assumptions for dynamic events. The Petri net model can be straightforwardly transformed to fault tree using the gate. Then, the FT can be integrated into the existing PSA. This paper applies the approach to the reliability analysis of Core Protection Calculator System (CPCS). Digital technology is replacing the analog instrumentation and control (I and C) systems in both new and upgraded nuclear power plants. As digital systems are introduced to nuclear power plants, issues related with reliability analyses of these digital systems are being raised. One of these issues is that static fault tree (FT) and event tree (ET) approach cannot properly account for dynamic interactions in the digital systems, such as multiple top events, logic loops and time delay. Many methods have been proposed to solve the problems, but there is no single method that is universally accepted for the application to the current generation probabilistic safety analysis (PSA)

  8. Fault Tree Analysis with Temporal Gates and Model Checking Technique for Qualitative System Safety Analysis

    International Nuclear Information System (INIS)

    Koh, Kwang Yong; Seong, Poong Hyun

    2010-01-01

    Fault tree analysis (FTA) has suffered from several drawbacks such that it uses only static gates and hence can not capture dynamic behaviors of the complex system precisely, and it is in lack of rigorous semantics, and reasoning process which is to check whether basic events really cause top events is done manually and hence very labor-intensive and time-consuming for the complex systems while it has been one of the most widely used safety analysis technique in nuclear industry. Although several attempts have been made to overcome this problem, they can not still do absolute or actual time modeling because they adapt relative time concept and can capture only sequential behaviors of the system. In this work, to resolve the problems, FTA and model checking are integrated to provide formal, automated and qualitative assistance to informal and/or quantitative safety analysis. Our approach proposes to build a formal model of the system together with fault trees. We introduce several temporal gates based on timed computational tree logic (TCTL) to capture absolute time behaviors of the system and to give concrete semantics to fault tree gates to reduce errors during the analysis, and use model checking technique to automate the reasoning process of FTA

  9. Realization of multi-parameter and multi-state in fault tree computer-aided building software

    International Nuclear Information System (INIS)

    Guo Xiaoli; Tong Jiejuan; Xue Dazhi

    2004-01-01

    More than one parameter and more than one failed state of a parameter are often involved in building fault tree, so it is necessary for fault tree computer-aided building software to deal with multi-parameter and multi-state. Fault Tree Expert System (FTES) has the target of aiding the FT-building work of hydraulic systems. This paper expatiates on how to realize multi-parameter and multi-state in FTES with focus on Knowledge Base and Illation Engine. (author)

  10. An Object-Oriented Approach of Keyword Querying over Fuzzy XML

    Directory of Open Access Journals (Sweden)

    Ting Li

    2016-09-01

    Full Text Available As the fuzzy data management has become one of the main research topics and directions, the question of how to obtain the useful information by means of keyword query from fuzzy XML documents is becoming a subject of an increasing needed investigation. Considering the keyword query methods on crisp XML documents, smallest lowest common ancestor (SLCA semantics is one of the most widely accepted semantics. When users propose the keyword query on fuzzy XML documents with the SLCA semantics, the query results are always incomplate, with low precision, and with no possibilities values returned. Most of keyword query semantics on XML documents only consider query results matching all keywords, yet users may also be interested in the query results matching partial keywords. To overcome these limitations, in this paper, we investigate how to obtain more comprehensive and meaningful results of keyword querying on fuzzy XML documents. We propose a semantics of object-oriented keyword querying on fuzzy XML documents. First, we introduce the concept of "object tree", analyze different types of matching result object trees and find the "minimum result object trees" which contain all keywords and "result object trees" which contain partial keywords. Then an object-oriented keyword query algorithm ROstack is proposed to obtain the root nodes of these matching result object trees, together with their possibilities. At last, experiments are conducted to verify the effectiveness and efficiency of our proposed algorithm.

  11. A heretic's view of the object-oriented paradigm

    DEFF Research Database (Denmark)

    Galle, Per

    1998-01-01

    A basic assumption of the object-oriented paradigm of computer programming and database thinking is that objects (including classes) are dynamic: classes have objects as instances which can be created, modified, and deleted. I argue that this leads to unnecessary conceptual difficulties, and sugg......A basic assumption of the object-oriented paradigm of computer programming and database thinking is that objects (including classes) are dynamic: classes have objects as instances which can be created, modified, and deleted. I argue that this leads to unnecessary conceptual difficulties......, and suggest that although real world entities are undeniably dynamic and perishable, much may be gained by assuming that the objects we use for thinking about them are static. This, it is submitted, may prove to facilitate both practical system development and theoretical pursuits of a mathematically sound...... object-oriented data model....

  12. Object-Oriented Programming in the Beta Programming Language

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann; Møller-Pedersen, Birger; Nygaard, Kristen

    This is a book on object-oriented programming and the BETA programming language. Object-oriented programming originated with the Simula languages developed at the Norwegian Computing Center, Oslo, in the 1960s. The first Simula language, Simula I, was intended for writing simulation programs....... Simula I was later used as a basis for defining a general purpose programming language, Simula 67. In addition to being a programming language, Simula1 was also designed as a language for describing and communicating about systems in general. Simula has been used by a relatively small community for many...... years, although it has had a major impact on research in computer science. The real breakthrough for object-oriented programming came with the development of Smalltalk. Since then, a large number of programming languages based on Simula concepts have appeared. C++ is the language that has had...

  13. ZLIB++: Object Oriented Numerical Library for Differential Algebra

    International Nuclear Information System (INIS)

    Yan, Yiton T

    2003-01-01

    New software engineering tools and object-oriented design have a great impact on the software development process. but in high energy physics all major packages were implemented in FORTRAN and porting of these codes to another language is rather complicated, primarily because of their huge size and heavy use of FORTRAN mathematical libraries. But some intrinsic accelerator concepts, such as nested structure of modern accelerators, look very pretty when implemented with the object-oriented approach. In this paper the authors present the object-oriented version of ZLIB, numerical library for differential algebra, and show how the modern approaches can simplify the development and support of accelerator codes, decrease code size, and allow description of complex mathematical transformations by simple language

  14. ZLIB++: Object-oriented numerical library for differential algebra

    International Nuclear Information System (INIS)

    Malitsky, N.; Reshetov, A.; Yan, Y.

    1994-01-01

    New software engineering tools and object-oriented design have a great impact on the software development process. But in high energy physics all major packages were implemented in FORTRAN and porting of these codes to another language is rather complicated, primarily because of their huge size and heavy use of FORTRAN mathematical libraries. But some intrinsic accelerator concepts, such as nested structure of modern accelerators, look very pretty when implemented with the object-oriented approach. In this paper we present the object-oriented version of ZLIB, numerical library for differential algebra and show how the modern approaches can simplify the development and support of accelerator codes, decrease code size, and allow description of complex mathematical transformations by simple language

  15. Towards a general object-oriented software development methodology

    Science.gov (United States)

    Seidewitz, ED; Stark, Mike

    1986-01-01

    Object diagrams were used to design a 5000 statement team training exercise and to design the entire dynamics simulator. The object diagrams are also being used to design another 50,000 statement Ada system and a personal computer based system that will be written in Modula II. The design methodology evolves out of these experiences as well as the limitations of other methods that were studied. Object diagrams, abstraction analysis, and associated principles provide a unified framework which encompasses concepts from Yourdin, Booch, and Cherry. This general object-oriented approach handles high level system design, possibly with concurrency, through object-oriented decomposition down to a completely functional level. How object-oriented concepts can be used in other phases of the software life-cycle, such as specification and testing is being studied concurrently.

  16. Humanoid Robotics: Real-Time Object Oriented Programming

    Science.gov (United States)

    Newton, Jason E.

    2005-01-01

    Programming of robots in today's world is often done in a procedural oriented fashion, where object oriented programming is not incorporated. In order to keep a robust architecture allowing for easy expansion of capabilities and a truly modular design, object oriented programming is required. However, concepts in object oriented programming are not typically applied to a real time environment. The Fujitsu HOAP-2 is the test bed for the development of a humanoid robot framework abstracting control of the robot into simple logical commands in a real time robotic system while allowing full access to all sensory data. In addition to interfacing between the motor and sensory systems, this paper discusses the software which operates multiple independently developed control systems simultaneously and the safety measures which keep the humanoid from damaging itself and its environment while running these systems. The use of this software decreases development time and costs and allows changes to be made while keeping results safe and predictable.

  17. C++, objected-oriented programming, and astronomical data models

    Science.gov (United States)

    Farris, A.

    1992-01-01

    Contemporary astronomy is characterized by increasingly complex instruments and observational techniques, higher data collection rates, and large data archives, placing severe stress on software analysis systems. The object-oriented paradigm represents a significant new approach to software design and implementation that holds great promise for dealing with this increased complexity. The basic concepts of this approach will be characterized in contrast to more traditional procedure-oriented approaches. The fundamental features of objected-oriented programming will be discussed from a C++ programming language perspective, using examples familiar to astronomers. This discussion will focus on objects, classes and their relevance to the data type system; the principle of information hiding; and the use of inheritance to implement generalization/specialization relationships. Drawing on the object-oriented approach, features of a new database model to support astronomical data analysis will be presented.

  18. An object-oriented simulation package for power plants

    International Nuclear Information System (INIS)

    Robinson, J.T.; Otaduy, P.J.

    1987-01-01

    This paper describes the application of object-oriented programming to the simulation of continuous/discrete processes such as nuclear power plants. Systems are modeled using this technique as a collection of objects that communicate by passing messages, which invoke methods that describe the state and dynamic behavior of objects. The objects themselves generally correspond to actual plant components, thus minimizing the representational mismatch between actual and modeled systems and facilitating their validation. Several concepts of object-oriented programming, in particular classes, inheritance, and message passing, have proved to be very useful for simulation. The use of these features are discussed and illustrated with examples

  19. Virtual classes: a powerful mechanism in object-oriented programming

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann; Møller-Pedersen, Birger

    1989-01-01

    The notions of class, subclass and virtual procedure are fairly well understood and recognized as some of the key concepts in object-oriented programming. The possibility of modifying a virtual procedure in a subclass is a powerful technique for specializing the general properties of the superclass....... In most object-oriented languages, the attributes of an object may be references to objects and (virtual) procedures. In Simula and BETA it is also possible to have class attributes. The power of class attributes has not yet been widely recognized. In BETA a class may also have virtual class attributes...

  20. Elements of a Reversible Object-Oriented Language

    DEFF Research Database (Denmark)

    Schultz, Ulrik Pagh; Axelsen, Holger Bock

    2016-01-01

    This paper presents initial ideas for the design and implementation of a reversible object-oriented language based on extending Janus with object-oriented concepts such as classes that encapsulate behavior and state, inheritance, virtual dispatching, as well as constructors. We show that virtual...... dispatching is a reversible decision mechanism easily translatable to a standard reversible programming model such as Janus, and we argue that reversible management of state can be accomplished using reversible constructors. The language is implemented in terms of translation to standard Janus programs....

  1. Query Processing and Interlinking of Fuzzy Object-Oriented Database

    OpenAIRE

    Shweta Dwivedi; Santosh Kumar

    2017-01-01

    Due to the many limitation and poor data handling in the existing relational database, the software professional and researchers moves towards the object-oriented database which has much better capability to handling the real and complex real world data i.e. clear and crisp data and also have the capability to perform some huge and complex queries in an effective manner. On the other hand, a new approach in database is introduced named as Fuzzy Object-Oriented Database (FOOD); it has all the ...

  2. The GENIE Universal, Object-Oriented Neutrino Generator

    International Nuclear Information System (INIS)

    Andreopoulos, C.

    2006-01-01

    A Universal Object-Oriented/C++ Neutrino Monte Carlo Generator (GENIE) is briefly described. The purpose of this large scale software system is to become the 'canonical' Monte Carlo for Neutrino Interaction Physics whose validity will extend to all neutrino types and nuclear targets in the energy range from few MeV to few hundred GeV. GENIE attempts to unify the Monte Carlo generation approaches used by a host of different, smaller procedural systems in a modern object-oriented software design. It is already a mature software system that currently consists of ∼100,000 lines of C++ code (∼350 classes organised in ∼40 packages)

  3. An object-oriented approach to evaluating multiple spectral models

    International Nuclear Information System (INIS)

    Majoras, R.E.; Richardson, W.M.; Seymour, R.S.

    1995-01-01

    A versatile, spectroscopy analysis engine has been developed by using object-oriented design and analysis techniques coupled with an object-oriented language, C++. This engine provides the spectroscopist with the choice of several different peak shape models that are tailored to the type of spectroscopy being performed. It also allows ease of development in adapting the engine to other analytical methods requiring more complex peak fitting in the future. This results in a program that can currently be used across a wide range of spectroscopy applications and anticipates inclusion of future advances in the field. (author) 6 refs.; 1 fig

  4. The Software Bus, an Object-Oriented Data Exchange System

    International Nuclear Information System (INIS)

    Akerbaek, T.; Louka, M.

    1996-01-01

    This document describes the Software Bus System, developed for object-oriented task to task communication in a TCP/IP based network. The Software Bus is a set of library functions, developed to be used for the Picasso-3 UIMS, and as a general purpose tool for dynamically interfacing programs at run-time. The Software Bus offers a high level object-oriented data exchange mechanism that relieves the application programmer of the low level TCP/IP-programming and communication protocol handling. The Software Bus is currently available under several UNIX platforms and a version for Windows NT is planned for late 1996. (author)

  5. An intelligent dynamic simulation environment: An object-oriented approach

    International Nuclear Information System (INIS)

    Robinson, J.T.; Kisner, R.A.

    1988-01-01

    This paper presents a prototype simulation environment for nuclear power plants which illustrates the application of object-oriented programming to process simulation. Systems are modeled using this technique as a collection of objects which communicate via message passing. The environment allows users to build simulation models by selecting iconic representations of plant components from a menu and connecting them with the aid of a mouse. Models can be modified graphically at any time, even as the simulation is running, and the results observed immediately via real-time graphics. This prototype illustrates the use of object-oriented programming to create a highly interactive and automated simulation environment. 9 refs., 4 figs

  6. PC-based support programs coupled with the sets code for large fault tree analysis

    International Nuclear Information System (INIS)

    Hioki, K.; Nakai, R.

    1989-01-01

    Power Reactor and Nuclear Fuel Development Corporation (PNC) has developed four PC programs: IEIQ (Initiating Event Identification and Quantification), MODESTY (Modular Even Description for a Variety of Systems), FAUST (Fault Summary Tables Generation Program) and ETAAS (Event Tree Analysis Assistant System). These programs prepare the input data for the SETS (Set Equation Transformation System) code and construct and quantify event trees (E/Ts) using the output of the SETS code. The capability of these programs is described and some examples of the results are presented in this paper. With these PC programs and the SETS code, PSA can now be performed with more consistency and less manpower

  7. The integration of expert-defined importance factors to enrich Bayesian Fault Tree Analysis

    International Nuclear Information System (INIS)

    Darwish, Molham; Almouahed, Shaban; Lamotte, Florent de

    2017-01-01

    This paper proposes an analysis of a hybrid Bayesian-Importance model for system designers to improve the quality of services related to Active Assisted Living Systems. The proposed model is based on two factors: failure probability measure of different service components and, an expert defined degree of importance that each component holds for the success of the corresponding service. The proposed approach advocates the integration of expert-defined importance factors to enrich the Bayesian Fault Tree Analysis (FTA) approach. The evaluation of the proposed approach is conducted using the Fault Tree Analysis formalism where the undesired state of a system is analyzed using Boolean logic mechanisms to combine a series of lower-level events.

  8. RADYBAN: A tool for reliability analysis of dynamic fault trees through conversion into dynamic Bayesian networks

    International Nuclear Information System (INIS)

    Montani, S.; Portinale, L.; Bobbio, A.; Codetta-Raiteri, D.

    2008-01-01

    In this paper, we present RADYBAN (Reliability Analysis with DYnamic BAyesian Networks), a software tool which allows to analyze a dynamic fault tree relying on its conversion into a dynamic Bayesian network. The tool implements a modular algorithm for automatically translating a dynamic fault tree into the corresponding dynamic Bayesian network and exploits classical algorithms for the inference on dynamic Bayesian networks, in order to compute reliability measures. After having described the basic features of the tool, we show how it operates on a real world example and we compare the unreliability results it generates with those returned by other methodologies, in order to verify the correctness and the consistency of the results obtained

  9. Post Fire Safe Shutdown Analysis Using a Fault Tree Logic Model

    International Nuclear Information System (INIS)

    Yim, Hyun Tae; Park, Jun Hyun

    2005-01-01

    Every nuclear power plant should have its own fire hazard analysis including the fire safe shutdown analysis. A safe shutdown (SSD) analysis is performed to demonstrate the capability of the plant to safely shut down for a fire in any given area. The basic assumption is that there will be fire damage to all cables and equipment located within a common fire area. When evaluating the SSD capabilities of the plant, based on a review of the systems, equipment and cables within each fire area, it should be determined which shutdown paths are either unaffected or least impacted by a postulated fire within the fire area. Instead of seeking a success path for safe shutdown given all cables and equipment damaged by a fire, there can be an alternative approach to determine the SSD capability: fault tree analysis. This paper introduces the methodology for fire SSD analysis using a fault tree logic model

  10. The use of fault tree analysis to minimize research reactor downtime

    International Nuclear Information System (INIS)

    Dodd, B.; Wang, C.H.; Anderson, T.V.

    1984-01-01

    For many reasons it is often highly desirable to maintain a research reactor in a continuously operable state and in the event of any failures to minimize the length of the reactor downtime. In order to keep the length of future downtimes to less than ten days for the sixteen year old OSU TRIGA reactor, a fault tree analysis was performed for all of the systems required to maintain the reactor operational. As a result of this analysis, it was possible to determine the critical parts and key components. By examining the availability and delivery times for each of these items, it was then possible to make reasoned decisions relating to the advance purchase of spare parts. This paper outlines the above process, along with examples of fault trees developed, and a recent history of the efficacy of this technique. (author)

  11. Selection the Optimum Suppliers Compound Using a Mixed Model of MADM and Fault Tree Analysis

    Directory of Open Access Journals (Sweden)

    Meysam Azimian

    2017-03-01

    Full Text Available In this paper, an integrated approach of MADM and fault tree analysis (FTA is provided for determining the most reliable combination of suppliers for a strategic product in IUT University. At first, risks of suppliers is estimated by defining the indices for evaluating them, determining their relative status indices and using satisfying and SAW methods. Then, intrinsic risks of utilized equipments in the products are qualified and the final integrated risk for equipments is determined. Finally, through all the different scenarios, the best composition of equipment suppliers is selected by defining the palpable top events and fault tree analysis. The contribution of this paper is about proposing an integrated method of MADM and FTA to determine the most reliable suppliers in order to minimize the final risk of providing a product.

  12. SAFTAC, Monte-Carlo Fault Tree Simulation for System Design Performance and Optimization

    International Nuclear Information System (INIS)

    Crosetti, P.A.; Garcia de Viedma, L.

    1976-01-01

    1 - Description of problem or function: SAFTAC is a Monte Carlo fault tree simulation program that provides a systematic approach for analyzing system design, performing trade-off studies, and optimizing system changes or additions. 2 - Method of solution: SAFTAC assumes an exponential failure distribution for basic input events and a choice of either Gaussian distributed or constant repair times. The program views the system represented by the fault tree as a statistical assembly of independent basic input events, each characterized by an exponential failure distribution and, if used, a constant or normal repair distribution. 3 - Restrictions on the complexity of the problem: The program is dimensioned to handle 1100 basic input events and 1100 logical gates. It can be re-dimensioned to handle up to 2000 basic input events and 2000 logical gates within the existing core memory

  13. A Study on Landslide Risk Management by Applying Fault Tree Logics

    Directory of Open Access Journals (Sweden)

    Kazmi Danish

    2017-01-01

    Full Text Available Slope stability is one of the focal areas of curiosity to geotechnical designers and also appears logical for the application of probabilistic approaches since the analysis lead to a “probability of failure”. Assessment of the existing slopes in relation with risks seems to be more meaningful when concerning with landslides. Probabilistic slope stability analysis (PSSA is the best option in covering the landslides events. The intent here is to bid a probabilistic framework for quantified risk analysis with human uncertainties. In this regard, Fault Tree Analysis is utilized and for prediction of risk levels, consequences of the failures of the reference landslides have been taken. It is concluded that logics of fault trees is best fit, to clinch additional categories of uncertainty; like human, organizational, and knowledge related. In actual, the approach has been used in bringing together engineering and management performances and personnel, to produce reliability in slope engineering practices.

  14. San Onofre/Zion auxiliary feedwater system seismic fault tree modeling

    International Nuclear Information System (INIS)

    Najafi, B.; Eide, S.

    1982-02-01

    As part of the study for the seismic evaluation of the San Onofre Unit 1 Auxiliary Feedwater System (AFWS), a fault tree model was developed capable of handling the effect of structural failure of the plant (in the event of an earthquake) on the availability of the AFWS. A compatible fault tree model was developed for the Zion Unit 1 AFWS in order to compare the results of the two systems. It was concluded that if a single failure of the San Onofre Unit 1 AFWS is to be prevented, some weight existing, locally operated locked open manual valves have to be used for isolation of a rupture in specific parts of the AFWS pipings

  15. Methodology for reliability allocation based on fault tree analysis and dualistic contrast

    Institute of Scientific and Technical Information of China (English)

    TONG Lili; CAO Xuewu

    2008-01-01

    Reliability allocation is a difficult multi-objective optimization problem.This paper presents a methodology for reliability allocation that can be applied to determine the reliability characteristics of reactor systems or subsystems.The dualistic contrast,known as one of the most powerful tools for optimization problems,is applied to the reliability allocation model of a typical system in this article.And the fault tree analysis,deemed to be one of the effective methods of reliability analysis,is also adopted.Thus a failure rate allocation model based on the fault tree analysis and dualistic contrast is achieved.An application on the emergency diesel generator in the nuclear power plant is given to illustrate the proposed method.

  16. Using SETS to find minimal cut sets in large fault trees

    International Nuclear Information System (INIS)

    Worrell, R.B.; Stack, D.W.

    1978-01-01

    An efficient algebraic algorithm for finding the minimal cut sets for a large fault tree was defined and a new procedure which implements the algorithm was added to the Set Equation Transformation System (SETS). The algorithm includes the identification and separate processing of independent subtrees, the coalescing of consecutive gates of the same kind, the creation of additional independent subtrees, and the derivation of the fault tree stem equation in stages. The computer time required to determine the minimal cut sets using these techniques is shown to be substantially less than the computer time required to determine the minimal cut sets when these techniques are not employed. It is shown for a given example that the execution time required to determine the minimal cut sets can be reduced from 7,686 seconds to 7 seconds when all of these techniques are employed

  17. Algorithms and programs for evaluating fault trees with multi-state components

    International Nuclear Information System (INIS)

    Wickenhaeuser, A.

    1989-07-01

    Part 1 and 2 of the report contain a summary overview of methods and algorithms for the solution of fault tree analysis problems. The following points are treated in detail: Treatment of fault tree components with more than two states. Acceleration of the solution algorithms. Decomposition and modularization of extensive systems. Calculation of the structural function and the exact occurrence probability. Treatment of statistical dependencies. A flexible tool to be employed in solving these problems is the method of forming Boolean variables with restrictions. In this way, components with more than two states can be treated, the possibilities of forming modules expanded, and statistical dependencies treated. Part 3 contains descriptions of the MUSTAFA, MUSTAMO, PASPI, and SIMUST computer programs based on these methods. (orig./HP) [de

  18. Material control study: a directed graph and fault tree procedure for adversary event set generation

    International Nuclear Information System (INIS)

    Lambert, H.E.; Lim, J.J.; Gilman, F.M.

    1978-01-01

    In work for the United States Nuclear Regulatory Commission, Lawrence Livermore Laboratory is developing an assessment procedure to evaluate the effectiveness of a potential nuclear facility licensee's material control (MC) system. The purpose of an MC system is to prevent the theft of special nuclear material such as plutonium and highly enriched uranium. The key in the assessment procedure is the generation and analysis of the adversary event sets by a directed graph and fault-tree methodology

  19. Failure rate modeling using fault tree analysis and Bayesian network: DEMO pulsed operation turbine study case

    Energy Technology Data Exchange (ETDEWEB)

    Dongiovanni, Danilo Nicola, E-mail: danilo.dongiovanni@enea.it [ENEA, Nuclear Fusion and Safety Technologies Department, via Enrico Fermi 45, Frascati 00040 (Italy); Iesmantas, Tomas [LEI, Breslaujos str. 3 Kaunas (Lithuania)

    2016-11-01

    Highlights: • RAMI (Reliability, Availability, Maintainability and Inspectability) assessment of secondary heat transfer loop for a DEMO nuclear fusion plant. • Definition of a fault tree for a nuclear steam turbine operated in pulsed mode. • Turbine failure rate models update by mean of a Bayesian network reflecting the fault tree analysis in the considered scenario. • Sensitivity analysis on system availability performance. - Abstract: Availability will play an important role in the Demonstration Power Plant (DEMO) success from an economic and safety perspective. Availability performance is commonly assessed by Reliability Availability Maintainability Inspectability (RAMI) analysis, strongly relying on the accurate definition of system components failure modes (FM) and failure rates (FR). Little component experience is available in fusion application, therefore requiring the adaptation of literature FR to fusion plant operating conditions, which may differ in several aspects. As a possible solution to this problem, a new methodology to extrapolate/estimate components failure rate under different operating conditions is presented. The DEMO Balance of Plant nuclear steam turbine component operated in pulse mode is considered as study case. The methodology moves from the definition of a fault tree taking into account failure modes possibly enhanced by pulsed operation. The fault tree is then translated into a Bayesian network. A statistical model for the turbine system failure rate in terms of subcomponents’ FR is hence obtained, allowing for sensitivity analyses on the structured mixture of literature and unknown FR data for which plausible value intervals are investigated to assess their impact on the whole turbine system FR. Finally, the impact of resulting turbine system FR on plant availability is assessed exploiting a Reliability Block Diagram (RBD) model for a typical secondary cooling system implementing a Rankine cycle. Mean inherent availability

  20. Failure rate modeling using fault tree analysis and Bayesian network: DEMO pulsed operation turbine study case

    International Nuclear Information System (INIS)

    Dongiovanni, Danilo Nicola; Iesmantas, Tomas

    2016-01-01

    Highlights: • RAMI (Reliability, Availability, Maintainability and Inspectability) assessment of secondary heat transfer loop for a DEMO nuclear fusion plant. • Definition of a fault tree for a nuclear steam turbine operated in pulsed mode. • Turbine failure rate models update by mean of a Bayesian network reflecting the fault tree analysis in the considered scenario. • Sensitivity analysis on system availability performance. - Abstract: Availability will play an important role in the Demonstration Power Plant (DEMO) success from an economic and safety perspective. Availability performance is commonly assessed by Reliability Availability Maintainability Inspectability (RAMI) analysis, strongly relying on the accurate definition of system components failure modes (FM) and failure rates (FR). Little component experience is available in fusion application, therefore requiring the adaptation of literature FR to fusion plant operating conditions, which may differ in several aspects. As a possible solution to this problem, a new methodology to extrapolate/estimate components failure rate under different operating conditions is presented. The DEMO Balance of Plant nuclear steam turbine component operated in pulse mode is considered as study case. The methodology moves from the definition of a fault tree taking into account failure modes possibly enhanced by pulsed operation. The fault tree is then translated into a Bayesian network. A statistical model for the turbine system failure rate in terms of subcomponents’ FR is hence obtained, allowing for sensitivity analyses on the structured mixture of literature and unknown FR data for which plausible value intervals are investigated to assess their impact on the whole turbine system FR. Finally, the impact of resulting turbine system FR on plant availability is assessed exploiting a Reliability Block Diagram (RBD) model for a typical secondary cooling system implementing a Rankine cycle. Mean inherent availability

  1. The Combined Application of Fault Trees and Turbine Cycle Simulation in Generation Risk Assessment

    International Nuclear Information System (INIS)

    Heo, Gyun Young; Park, Jin Kyun

    2009-01-01

    The paper describes a few ideas developed for the framework to quantify human errors taking place during the test and maintenance (T and M) in a secondary system of nuclear power plants, which was presented in the previous meeting. GRA-HRE (Generation Risk Assessment for Human Related Events) is composed of four essential components, the human error interpreter, the frequency estimator, the risk estimator, and the derate estimator. The proposed GRA gave emphasis on explicitly considering human errors, performing fault tree analysis including the entire balance-of-plant side, and quantifying electric loss under abnormal plant configurations. In terms of the consideration of human errors, it was hard to distinguish the effects of human errors from other failure modes in the conventional GRA because the human errors were implicitly involved in mechanical failure mode. Since the risk estimator in GRA-HRE separately deals with the basic events representing human error modes such as control failure, wrong object, omission, wrong action, etc., we can recognize their relative importance comparing with other types of mechanical failures. Other specialties in GRA-HRE came from the combined application of fault tree analysis and turbine cycle simulation. The previous study suggested that we would use the fault tree analysis with the top events designated by system's malfunction such as 'feedwater system failure' to develop the risk estimator. However, this approach could not clearly provide the path of propagation of human errors, and it was difficult to present the failure logics in some cases. In order to overcome these bottlenecks, the paper is going to propose the modified idea to setup top events and to explain how to make use of turbine cycle simulation to complete the fault trees in a cooperative manner

  2. MOCUS, Minimal Cut Sets and Minimal Path Sets from Fault Tree Analysis

    International Nuclear Information System (INIS)

    Fussell, J.B.; Henry, E.B.; Marshall, N.H.

    1976-01-01

    1 - Description of problem or function: From a description of the Boolean failure logic of a system, called a fault tree, and control parameters specifying the minimal cut set length to be obtained MOCUS determines the system failure modes, or minimal cut sets, and the system success modes, or minimal path sets. 2 - Method of solution: MOCUS uses direct resolution of the fault tree into the cut and path sets. The algorithm used starts with the main failure of interest, the top event, and proceeds to basic independent component failures, called primary events, to resolve the fault tree to obtain the minimal sets. A key point of the algorithm is that an and gate alone always increases the number of path sets; an or gate alone always increases the number of cut sets and increases the size of path sets. Other types of logic gates must be described in terms of and and or logic gates. 3 - Restrictions on the complexity of the problem: Output from MOCUS can include minimal cut and path sets for up to 20 gates

  3. Fault-Tree Modeling of Safety-Critical Network Communication in a Digitalized Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Hun; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of)

    2015-10-15

    To achieve technical self-reliance for nuclear I and C systems in Korea, the Advanced Power Reactor 1400 (APR-1400) man-machine interface system (MMIS) architecture was developed by the Korea Atomic Energy Research Institute (KAERI). As one of the systems in the developed MMIS architecture, the Engineered Safety Feature-Component Control System (ESF-CCS) employs a network communication system for the transmission of safety-critical information from group controllers (GCs) to loop controllers (LCs) to effectively accommodate the vast number of field controllers. The developed fault-tree model was then applied to several case studies. As an example of the development of a fault-tree model for ESF-CCS signal failure, the fault-tree model of ESF-CCS signal failure for CS pump PP01A in the CSAS condition was designed by considering the identified hazardous states of network failure that would result in a failure to provide input signals to the corresponding LC. The quantitative results for four case studies demonstrated that the probability of overall network communication failure, which was calculated as the sum of the failure probability associated with each failure cause, contributes up to 1.88% of the probability of ESF-CCS signal failure for the CS pump considered in the case studies.

  4. Learning Object-Orientation through ICT-mediated Apprenticeship

    DEFF Research Database (Denmark)

    Fjuk, A.; Berge, O.; Bennedsen, J.

    2004-01-01

    In this paper, we show how sociocultural theories inform the design of a course in object-oriented programming. An essential learning objective within this philosophy is the programming processes as such. To move toward this learning goal, the course design incorporates a combination of the so...

  5. Object Oriented and Functional Programming for Symbolic Manipulation

    OpenAIRE

    Vlasov, Alexander Yu.

    1999-01-01

    The advantages of mixed approach with using different kinds of programming techniques for symbolic manipulation are discussed. The main purpose of approach offered is merge the methods of object oriented programming that convenient for presentation data and algorithms for user with advantages of functional languages for data manipulation, internal presentation, and portability of software.

  6. Clinical Views: Object-Oriented Views for Clinical Databases

    Science.gov (United States)

    Portoni, Luisa; Combi, Carlo; Pinciroli, Francesco

    1998-01-01

    We present here a prototype of a clinical information system for the archiving and the management of multimedia and temporally-oriented clinical data related to PTCA patients. The system is based on an object-oriented DBMS and supports multiple views and view schemas on patients' data. Remote data access is supported too.

  7. Improving Object-Oriented Methods by using Fuzzy Logic

    NARCIS (Netherlands)

    Marcelloni, Francesco; Aksit, Mehmet

    2000-01-01

    Object-oriented methods create software artifacts through the application of a large number or rules. Rules are typically formulated in two-valued logic. There are a number of problems on how rules are defined and applied in current methods. First, two-valued logic can capture completely neither

  8. Object Oriented Software Development Using A Use-Cases Approach

    African Journals Online (AJOL)

    This paper presents a systematic approach to the analysis and design of an online banking system using the Use-Cases method of Jacobson. This analysis and design method will support the development of highly effective reuseable code, thus bringing the benefits of object orientation into important software projects.

  9. Java Test Driver Generation from Object-Oriented Interaction Traces

    NARCIS (Netherlands)

    M.M. Bonsangue (Marcello); F.S. de Boer (Frank); A. Gruener; M. Steffen

    2009-01-01

    htmlabstractIn the context of test-driven development for object-oriented programs, mock objects are increasingly used for unit testing. Several Java mock object frameworks exist, which all have in common that mock objects, realizing the test environment, are directly specied at the Java program

  10. The Need for Killer Examples for Object-Oriented Frameworks

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Christensen, Henrik Bærbak

    2003-01-01

    In this paper, we argue in favor of introducing object-oriented frameworks as an important topic in our software engineering teaching. Frameworks provide a basis for students to build interesting and impressive programs even with small programming effort at the introductory level. Frameworks...

  11. Remote sensing object-oriented approaches coupled with ...

    African Journals Online (AJOL)

    Hence the combined use of new generation sensor imagery and the employment of object-oriented image classification techniques provided more accurate information on Melia invasion in the study area. This is an encouraging result given the high degree of intermingling of Melia with other plants at the study site.

  12. Predicting class testability using object-oriented metrics

    NARCIS (Netherlands)

    M. Bruntink (Magiel); A. van Deursen (Arie)

    2004-01-01

    textabstractIn this paper we investigate factors of the testability of object-oriented software systems. The starting point is given by a study of the literature to obtain both an initial model of testability and existing OO metrics related to testability. Subsequently, these metrics are evaluated

  13. Model-Based Software Testing for Object-Oriented Software

    Science.gov (United States)

    Biju, Soly Mathew

    2008-01-01

    Model-based testing is one of the best solutions for testing object-oriented software. It has a better test coverage than other testing styles. Model-based testing takes into consideration behavioural aspects of a class, which are usually unchecked in other testing methods. An increase in the complexity of software has forced the software industry…

  14. Automating the Object-Oriented Software Development Process: Workshop Report

    NARCIS (Netherlands)

    Aksit, Mehmet; Tekinerdogan, B.

    1998-01-01

    Cost-effective realization of robust, adaptable and reusable software systems demands efficient and effective management of the overall software production process. Current object-oriented methods are not completely formalized and lack the ability of reasoning about the quality of processes and

  15. Automating the Object-Oriented Software Development Process: Workshop Report

    NARCIS (Netherlands)

    Aksit, Mehmet; Demeyer, S.; Bosch, H.G.P.; Tekinerdogan, B.

    Cost-effective realization of robust, adaptable and reusable software systems demands efficient and effective management of the overall software production process. Current object-oriented methods are not completely formalized and lack the ability of reasoning about the quality of processes and

  16. Real-time object-oriented programming: studies and proposals

    International Nuclear Information System (INIS)

    Fouquier, Gilles

    1996-01-01

    This thesis contributes to the introduction of real-time features in object-oriented programming. Object-oriented programming favours modularity and reusability. Therefore, its application to real-time introduces many theoretical and conceptual problems. To deal with these problems, a new real-time object-oriented programming model is presented. This model is based on the active object model which allows concurrence and maintains the encapsulation property. The real-time aspect is treated by replacing the concept of task by the concept of method processing and by associating a real-time constraint to each message (priority or deadline). The set of all the running methods is scheduled. This model, called ATOME, contains several sub-models to deal with the usual concurrence control integrating their priority and deadline processing. The classical HPF and EDF scheduling avoid priority or deadline inversion. This model and its variants are new proposals to program real-time applications in the object-oriented way, therefore easing reusability and code writing. The feasibility of this approach is demonstrated by extending and existing active object-based language to real-time, in using the rules defined in the ATOME model. (author) [fr

  17. Automatic Verification of Transactions on an Object-Oriented Database

    NARCIS (Netherlands)

    Spelt, D.; Balsters, H.

    1998-01-01

    In the context of the object-oriented data model, a compiletime approach is given that provides for a significant reduction of the amount of run-time transaction overhead due to integrity constraint checking. The higher-order logic Isabelle theorem prover is used to automatically prove which

  18. A Deductive and Typed Object-Oriented Language

    NARCIS (Netherlands)

    Bal, C.M.R.; Balsters, H.

    1993-01-01

    In this paper we introduce a logical query language extended with object-oriented typing facilities. This language, called DTL (from DataTypeLog), can be seen as an extension of Datalog equipped with complex objects, object identities, and multiple inheritance based on Cardelli type theory. The

  19. Engineering Object-Oriented Semantics Using Graph Transformations

    NARCIS (Netherlands)

    Kastenberg, H.; Kleppe, A.G.; Rensink, Arend

    In this paper we describe the application of the theory of graph transformations to the practise of language design. We have defined the semantics of a small but realistic object-oriented language (called TAAL) by mapping the language constructs to graphs and their operational semantics to graph

  20. Static analysis of unbounded structures in object-oriented programs

    NARCIS (Netherlands)

    Grabe, Immo

    2012-01-01

    In this thesis we investigate different techniques and formalisms to address complexity introduced by unbounded structures in object-oriented programs. We give a representation of a weakest precondition calculus for abstract object creation in dynamic logic. Based on this calculus we define symbolic

  1. Quick Prototyping of Educational Software: An Object-Oriented Approach.

    Science.gov (United States)

    Wong, Simon C-H

    1994-01-01

    Introduces and demonstrates a quick-prototyping model for educational software development that can be used by teachers developing their own courseware using an object-oriented programming system. Development of a courseware package called "The Match-Maker" is explained as an example that uses HyperCard for quick prototyping. (Contains…

  2. Object-Oriented Analysis, Structured Analysis, and Jackson System Development

    NARCIS (Netherlands)

    Van Assche, F.; Wieringa, Roelf J.; Moulin, B.; Rolland, C

    1991-01-01

    Conceptual modeling is the activity of producing a conceptual model of an actual or desired version of a universe of discourse (UoD). In this paper, two methods of conceptual modeling are compared, structured analysis (SA) and object-oriented analysis (OOA). This is done by transforming a model

  3. A new object-oriented interface to MDSplus

    International Nuclear Information System (INIS)

    Manduchi, G.; Fredian, T.; Stillerman, J.

    2010-01-01

    The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

  4. From Functions to Object-Orientation by Abstraction

    OpenAIRE

    Diertens, Bob

    2012-01-01

    In previous work we developed a framework of computational models for function and object execution. The models on an higher level of abstraction in this framework allow for concurrent execution of functions and objects. We show that the computational model for object execution complies with the fundamentals of object-orientation.

  5. A new object-oriented interface to MDSplus

    Energy Technology Data Exchange (ETDEWEB)

    Manduchi, G., E-mail: gabriele.manduchi@igi.cnr.i [Consorzio RFX, Euratom-ENEA Association, Corso Stati Uniti 4, Padova 35127 (Italy); Fredian, T.; Stillerman, J. [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States)

    2010-07-15

    The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

  6. Object-oriented design and programming in medical decision support.

    Science.gov (United States)

    Heathfield, H; Armstrong, J; Kirkham, N

    1991-12-01

    The concept of object-oriented design and programming has recently received a great deal of attention from the software engineering community. This paper highlights the realisable benefits of using the object-oriented approach in the design and development of clinical decision support systems. These systems seek to build a computational model of some problem domain and therefore tend to be exploratory in nature. Conventional procedural design techniques do not support either the process of model building or rapid prototyping. The central concepts of the object-oriented paradigm are introduced, namely encapsulation, inheritance and polymorphism, and their use illustrated in a case study, taken from the domain of breast histopathology. In particular, the dual roles of inheritance in object-oriented programming are examined, i.e., inheritance as a conceptual modelling tool and inheritance as a code reuse mechanism. It is argued that the use of the former is not entirely intuitive and may be difficult to incorporate into the design process. However, inheritance as a means of optimising code reuse offers substantial technical benefits.

  7. Object-Oriented Scientific Programming with Fortran 90

    Science.gov (United States)

    Norton, C.

    1998-01-01

    Fortran 90 is a modern language that introduces many important new features beneficial for scientific programming. We discuss our experiences in plasma particle simulation and unstructured adaptive mesh refinement on supercomputers, illustrating the features of Fortran 90 that support the object-oriented methodology.

  8. Component Composability Issues in Object-Oriented Programming

    NARCIS (Netherlands)

    Aksit, Mehmet; Tekinerdogan, B.

    1997-01-01

    Building software from reusable components is considered important in reducing development costs. Object-oriented languages such as C++, Smalltalk and Java, however, are not capable of expressing certain aspects of applications in a composable way. Software engineers may experience difficulties in

  9. PREP KITT, System Reliability by Fault Tree Analysis. PREP, Min Path Set and Min Cut Set for Fault Tree Analysis, Monte-Carlo Method. KITT, Component and System Reliability Information from Kinetic Fault Tree Theory

    International Nuclear Information System (INIS)

    Vesely, W.E.; Narum, R.E.

    1997-01-01

    1 - Description of problem or function: The PREP/KITT computer program package obtains system reliability information from a system fault tree. The PREP program finds the minimal cut sets and/or the minimal path sets of the system fault tree. (A minimal cut set is a smallest set of components such that if all the components are simultaneously failed the system is failed. A minimal path set is a smallest set of components such that if all of the components are simultaneously functioning the system is functioning.) The KITT programs determine reliability information for the components of each minimal cut or path set, for each minimal cut or path set, and for the system. Exact, time-dependent reliability information is determined for each component and for each minimal cut set or path set. For the system, reliability results are obtained by upper bound approximations or by a bracketing procedure in which various upper and lower bounds may be obtained as close to one another as desired. The KITT programs can handle independent components which are non-repairable or which have a constant repair time. Any assortment of non-repairable components and components having constant repair times can be considered. Any inhibit conditions having constant probabilities of occurrence can be handled. The failure intensity of each component is assumed to be constant with respect to time. The KITT2 program can also handle components which during different time intervals, called phases, may have different reliability properties. 2 - Method of solution: The PREP program obtains minimal cut sets by either direct deterministic testing or by an efficient Monte Carlo algorithm. The minimal path sets are obtained using the Monte Carlo algorithm. The reliability information is obtained by the KITT programs from numerical solution of the simple integral balance equations of kinetic tree theory. 3 - Restrictions on the complexity of the problem: The PREP program will obtain the minimal cut and

  10. Application of fault tree methodology to modeling of the AP1000 plant digital reactor protection system

    International Nuclear Information System (INIS)

    Teolis, D.S.; Zarewczynski, S.A.; Detar, H.L.

    2012-01-01

    The reactor trip system (RTS) and engineered safety features actuation system (ESFAS) in nuclear power plants utilizes instrumentation and control (IC) to provide automatic protection against unsafe and improper reactor operation during steady-state and transient power operations. During normal operating conditions, various plant parameters are continuously monitored to assure that the plant is operating in a safe state. In response to deviations of these parameters from pre-determined set points, the protection system will initiate actions required to maintain the reactor in a safe state. These actions may include shutting down the reactor by opening the reactor trip breakers and actuation of safety equipment based on the situation. The RTS and ESFAS are represented in probabilistic risk assessments (PRAs) to reflect the impact of their contribution to core damage frequency (CDF). The reactor protection systems (RPS) in existing nuclear power plants are generally analog based and there is general consensus within the PRA community on fault tree modeling of these systems. In new plants, such as AP1000 plant, the RPS is based on digital technology. Digital systems are more complex combinations of hardware components and software. This combination of complex hardware and software can result in the presence of faults and failure modes unique to a digital RPS. The United States Nuclear Regulatory Commission (NRC) is currently performing research on the development of probabilistic models for digital systems for inclusion in PRAs; however, no consensus methodology exists at this time. Westinghouse is currently updating the AP1000 plant PRA to support initial operation of plants currently under construction in the United States. The digital RPS is modeled using fault tree methodology similar to that used for analog based systems. This paper presents high level descriptions of a typical analog based RPS and of the AP1000 plant digital RPS. Application of current fault

  11. How to avoid the generation of logic loops in the construction of fault trees

    International Nuclear Information System (INIS)

    Demichela, M.; Piccinini, N.; Ciarambino, I.; Contini, S.

    2004-01-01

    Generation of an infinite series of identical sub-trees may occur during the construction of a Fault Tree (FT) when one item of equipment in a plant is considered several times in the same sub-tree in the course of the tree extraction from a HazOp (Hazard Operability analysis) analysis. Generation of loops in the construction of an FT can be avoided by means of an ad hoc logical analysis in which certain simple rules of syntax are taken into account. A radical solution, however, can be obtained if identification of unwanted events in a process plant is not undertaken with conventional procedures, such as HazOp (Operability Analysis with guide words, failure mode and effect analysis (FMEA) etc.), but with a more modern and structured version, such as Recursive Operability Analysis (ROA), which is both systematic and complete, and allows direct extraction of logic trees, (FT, event trees, etc.) for subsequent quantification. This feature means that, by contrast with conventional operability analysis, the congruence of the ROA itself can be checked. The ROA method is illustrated in this paper with the aid of some simple examples

  12. Object-oriented spatial-temporal association rules mining on ocean remote sensing imagery

    International Nuclear Information System (INIS)

    Xue, C J; Dong, Q; Ma, W X

    2014-01-01

    Using the long term marine remote sensing imagery, we develop an object-oriented spatial-temporal association rules mining framework to explore the association rules mining among marine environmental elements. Within the framework, two key issues are addressed. They are how to effectively deal with the related lattices and how to reduce the related dimensions? To deal with the first key issues, this paper develops an object-oriented method for abstracting marine sensitive objects from raster pixels and for representing them with a quadruple. To deal with the second key issues, by embedding the mutual information theory, we construct the direct association pattern tree to reduce the related elements at the first step, and then the Apriori algorithm is used to discover the spatio-temporal associated rules. Finally, Pacific Ocean is taken as a research area and multi- marine remote sensing imagery in recent three decades is used as a case study. The results show that the object-oriented spatio-temporal association rules mining can acquire the associated relationships not only among marine environmental elements in same region, also among the different regions. In addition, the information from association rules mining is much more expressive and informative in space and time than traditional spatio-temporal analysis

  13. Mobile Game Development: Object-Orientation or Not

    DEFF Research Database (Denmark)

    Zhang, Weishan; Han, Dong; Kunz, Thomas

    2007-01-01

    technology is the prevalent programming paradigm, most of the current mobile games are developed with object-orientation (OO) technologies. Intuitively OO is not a perfect paradigm for embedded software. Questions remain such as how OO and to what degree OO will affect the performance, executable file size......Mobile games are one of the primary entertainment applications at present. Limited by scarce resources, such as memory, CPU, input and output, etc, mobile game development is more difficult than desktop application development, with performance as one of the top critical requirements. As object-oriented...... for the development of mobile device applications (but normal for usual desktop applications). We then apply some optimization strategies along the way of structural programming. The experiment shows that the total jar file size of these five optimized games decreases 71%, the lines of codes decreases 59...

  14. Towards Integration of Object-Oriented Languages and State Machines

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    1999-01-01

    The goal of this paper is to obtain a one-to-one correspondence between state machines as e.g. used in UML and object-oriented programming languages. A proposal is made for a language mechanism that makes it possible for an object to change its virtual bindings at run-time. A state of an object may...... then be represented as a set of virtual bindings.One advantage of object-orientation is that it provides an integrating perspective on many phases of software development, including analysis, design and implementation. For the static set of OO language constructs there is almost a one-to-one correspondence between...... analysis/design notations and OO programming languages. No such correspondence exists for the dynamic aspects, but the proposed state-mechanism is a contribution to a better cor respondence. The proposal is based on previous work by Antero Taivalsaari and compared to the more complex features for changing...

  15. Object-oriented simulation for the Superconducting Super Collider

    International Nuclear Information System (INIS)

    Zhou, Jiasheng; Chung, Moon-Jung

    1992-10-01

    This paper describes the design and implementation of an object-oriented simulation environment called OZ for the Superconducting Super Collider (SSC). The design applies object-oriented technology to data visualization, behavior modelling, dynamic simulation and version control. A meta class structure is proposed to model different types of objects in large systems by their functionality. OZ provides a direct-manipulation user interface which allows the user to visualize the data as an object in the database and interactively model the component of the system. Modelling can be exercised at different levels of the class hierarchy and then can be dynamically bound into a system for simulation. Inheritance is used to derive new configurations of the system or subsystem from the existing one, and specify an object's behavior. Delegation is used to construct a system by instantiating existing objects and ''stealing'' their methods by delegators

  16. Object-oriented software design in semiautomatic building extraction

    Science.gov (United States)

    Guelch, Eberhard; Mueller, Hardo

    1997-08-01

    Developing a system for semiautomatic building acquisition is a complex process, that requires constant integration and updating of software modules and user interfaces. To facilitate these processes we apply an object-oriented design not only for the data but also for the software involved. We use the unified modeling language (UML) to describe the object-oriented modeling of the system in different levels of detail. We can distinguish between use cases from the users point of view, that represent a sequence of actions, yielding in an observable result and the use cases for the programmers, who can use the system as a class library to integrate the acquisition modules in their own software. The structure of the system is based on the model-view-controller (MVC) design pattern. An example from the integration of automated texture extraction for the visualization of results demonstrate the feasibility of this approach.

  17. Expert reasoning within an object-oriented framework

    International Nuclear Information System (INIS)

    Bohn, S.J.; Pennock, K.A.

    1991-10-01

    A large number of contaminated waste sites across the United States await site remediation efforts. These sites can be physically complex, composed of multiple, possibly interacting, contaminants distributed throughout one or more media. The Remedial Action Assessment System (RAAS) is being designed and developed to support decisions concerning the selection of remediation alternatives. The goal of this system is to broaden the consideration of remediation alternatives, while reducing the time and cost of making these considerations. The Remedial Action Assessment System was designed and constructed using object-oriented techniques. It is a hybrid system which uses a combination of quantitative and qualitative reasoning to consider and suggest remediation alternatives. the reasoning process that drives this application is centered around an object-oriented organization of remediation technology information. This paper briefly describes the waste remediation problem and then discusses the information structure and organization RAAS utilizes to address it. 4 refs., 4 figs

  18. Object-oriented user interfaces for personalized mobile learning

    CERN Document Server

    Alepis, Efthimios

    2014-01-01

    This book presents recent research in mobile learning and advanced user interfaces. It is shown how the combination of this fields can result in personalized educational software that meets the requirements of state-of-the-art mobile learning software. This book provides a framework that is capable of incorporating the software technologies, exploiting a wide range of their current advances and additionally investigating ways to go even further by providing potential solutions to future challenges. The presented approach uses the well-known Object-Oriented method in order to address these challenges. Throughout this book, a general model is constructed using Object-Oriented Architecture. Each chapter focuses on the construction of a specific part of this model, while in the conclusion these parts are unified. This book will help software engineers build more sophisticated personalized software that targets in mobile education, while at the same time retaining a high level of adaptivity and user-friendliness w...

  19. PSYCHE: An Object-Oriented Approach to Simulating Medical Education

    Science.gov (United States)

    Mullen, Jamie A.

    1990-01-01

    Traditional approaches to computer-assisted instruction (CAI) do not provide realistic simulations of medical education, in part because they do not utilize heterogeneous knowledge bases for their source of domain knowledge. PSYCHE, a CAI program designed to teach hypothetico-deductive psychiatric decision-making to medical students, uses an object-oriented implementation of an intelligent tutoring system (ITS) to model the student, domain expert, and tutor. It models the transactions between the participants in complex transaction chains, and uses heterogeneous knowledge bases to represent both domain and procedural knowledge in clinical medicine. This object-oriented approach is a flexible and dynamic approach to modeling, and represents a potentially valuable tool for the investigation of medical education and decision-making.

  20. Object-oriented biomedical system modelling--the language.

    Science.gov (United States)

    Hakman, M; Groth, T

    1999-11-01

    The paper describes a new object-oriented biomedical continuous system modelling language (OOBSML). It is fully object-oriented and supports model inheritance, encapsulation, and model component instantiation and behaviour polymorphism. Besides the traditional differential and algebraic equation expressions the language includes also formal expressions for documenting models and defining model quantity types and quantity units. It supports explicit definition of model input-, output- and state quantities, model components and component connections. The OOBSML model compiler produces self-contained, independent, executable model components that can be instantiated and used within other OOBSML models and/or stored within model and model component libraries. In this way complex models can be structured as multilevel, multi-component model hierarchies. Technically the model components produced by the OOBSML compiler are executable computer code objects based on distributed object and object request broker technology. This paper includes both the language tutorial and the formal language syntax and semantic description.

  1. NPA4K development system using object-oriented methodology

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwang Seong; Hahn, Do Hee

    2000-11-01

    NPA4K consists of module programs with several components for various functions. Software components have to be developed systematically by compartment criteria and design method. In this paper, the understandings of a typical Object-Oriented Methodology , UML(Unified Modeling Language), the procedure for NPA4K program development and the architecture for long-term development of NPA4K are introduced.

  2. Object Oriented Toolbox for Modelling and Simulation of Dynamical Systems

    DEFF Research Database (Denmark)

    Poulsen, Mikael Zebbelin; Wagner, Falko Jens; Thomsen, Per Grove

    1998-01-01

    This paper presents the results of an ongoing project, dealing with design and implementation of a simulation toolbox based on object oriented modelling techniques. The paper describes an experimental implementation of parts of such a toolbox in C++, and discusses the experiences drawn from that ...... that process. Essential to the work is the focus on simulation of complex dynamical systems, from modelling the single components/subsystems to building complete systemssuch a toolbox in C++, and discusses the experiences drawn from that process....

  3. NPA4K development system using object-oriented methodology

    International Nuclear Information System (INIS)

    Jeong, Kwang Seong; Hahn, Do Hee

    2000-11-01

    NPA4K consists of module programs with several components for various functions. Software components have to be developed systematically by compartment criteria and design method. In this paper, the understandings of a typical Object-Oriented Methodology , UML(Unified Modeling Language), the procedure for NPA4K program development and the architecture for long-term development of NPA4K are introduced

  4. An object-oriented software interface to VME

    International Nuclear Information System (INIS)

    Thomas, Timothy L; Gottlieb, Eric; Gold, Michael

    1996-01-01

    In the next millennium, data acquisition tasks for high energy physics will increasingly rely on distributed processing and the VME bus. To provide transparent, general-purpose access to VME hardware modules through a VME-embedded processor, we have created a simple, portable, easily configured object-oriented interface to the VME bus. This software is particularly well-suited for hardware development, providing rapid engineering level access to the VME interface of prototype modules. (author)

  5. Analyzing the Implicit Computational Complexity of object-oriented programs

    OpenAIRE

    Marion , Jean-Yves; Péchoux , Romain

    2008-01-01

    International audience; A sup-interpretation is a tool which provides upper bounds on the size of the values computed by the function symbols of a program. Sup-interpretations have shown their interest to deal with the complexity of first order functional programs. This paper is an attempt to adapt the framework of sup-interpretations to a fragment of object-oriented programs, including loop and while constructs and methods with side effects. We give a criterion, called brotherly criterion, w...

  6. Objects as closures: Abstract semantics of object oriented languages

    Science.gov (United States)

    Reddy, Uday S.

    1989-01-01

    We discuss denotational semantics of object-oriented languages, using the concept of closure widely used in (semi) functional programming to encapsulate side effects. It is shown that this denotational framework is adequate to explain classes, instantiation, and inheritance in the style of Simula as well as SMALLTALK-80. This framework is then compared with that of Kamin, in his recent denotational definition of SMALLTALK-80, and the implications of the differences between the two approaches are discussed.

  7. Objects as closures - Abstract semantics of object oriented languages

    Science.gov (United States)

    Reddy, Uday S.

    1988-01-01

    The denotational semantics of object-oriented languages is discussed using the concept of closure widely used in (semi) functional programming to encapsulate side effects. It is shown that this denotational framework is adequate to explain classes, instantiation, and inheritance in the style of Simula as well as SMALLTALK-80. This framework is then compared with that of Kamin (1988), in his recent denotational definition of SMALLTALK-80, and the implications of the differences between the two approaches are discussed.

  8. Implementing interactive computing in an object-oriented environment

    Directory of Open Access Journals (Sweden)

    Frederic Udina

    2000-04-01

    Full Text Available Statistical computing when input/output is driven by a Graphical User Interface is considered. A proposal is made for automatic control of computational flow to ensure that only strictly required computations are actually carried on. The computational flow is modeled by a directed graph for implementation in any object-oriented programming language with symbolic manipulation capabilities. A complete implementation example is presented to compute and display frequency based piecewise linear density estimators such as histograms or frequency polygons.

  9. Object oriented software development in the atlas collaboration

    International Nuclear Information System (INIS)

    Schaffer, A.

    1994-01-01

    For more than a year a group within the Atlas Collaboration has been investigating the possibilities of the application of object oriented methodology and program development to the software of Atlas. Recently this group has been joined by members of the CMS Collaboration in the submission of a proposal to the DRDC at CERN to find a common solution for the software development environment for LHC. This talk will discuss the progress achieved so far and the future perspective

  10. Query Migration from Object Oriented World to Semantic World

    Directory of Open Access Journals (Sweden)

    Nassima Soussi

    2016-06-01

    Full Text Available In the last decades, object-oriented approach was able to take a large share of databases market aiming to design and implement structured and reusable software through the composition of independent elements in order to have programs with a high performance. On the other hand, the mass of information stored in the web is increasing day after day with a vertiginous speed, exposing the currently web faced with the problem of creating a bridge so as to facilitate access to data between different applications and systems as well as to look for relevant and exact information wished by users. In addition, all existing approach of rewriting object oriented languages to SPARQL language rely on models transformation process to guarantee this mapping. All the previous raisons has prompted us to write this paper in order to bridge an important gap between these two heterogeneous worlds (object oriented and semantic web world by proposing the first provably semantics preserving OQLto-SPARQL translation algorithm for each element of OQL Query (SELECT clause, FROM clause, FILTER constraint, implicit/ explicit join and union/intersection SELECT queries.

  11. A gridding method for object-oriented PIC codes

    International Nuclear Information System (INIS)

    Gisler, G.; Peter, W.; Nash, H.; Acquah, J.; Lin, C.; Rine, D.

    1993-01-01

    A simple, rule-based gridding method for object-oriented PIC codes is described which is not only capable of dealing with complicated structures such as multiply-connected regions, but is also computationally faster than classical gridding techniques. Using, these smart grids, vacant cells (e.g., cells enclosed by conductors) will never have to be stored or calculated, thus avoiding the usual situation of having to zero electromagnetic fields within conductors after valuable cpu time has been spent in calculating the fields within these cells in the first place. This object-oriented gridding technique makes use of encapsulating characteristics of actual physical objects (particles, fields, grids, etc.) in C ++ classes and supporting software reuse of these entities through C ++ class inheritance relations. It has been implemented in the form of a simple two-dimensional plasma particle-in-cell code, and forms the initial effort of an AFOSR research project to develop a flexible software simulation environment for particle-in-cell algorithms based on object-oriented technology

  12. A new Object-oriented Interface to MDSplus

    Energy Technology Data Exchange (ETDEWEB)

    Manduchi, G. [Associazione EURATOM-ENEA sulla Fusione, Padua (Italy); Fredian, T. [MIT Plasma Science and Fusion Center, Littleton, NH (United States); Stillerman, J. [MIT Plasma Science and Fusion Center, Cambridge, MA (United States)

    2009-07-01

    The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multi platform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in UML. Based on this description the new API has been implemented so far in C++, Python, and Java. Fortran 90 and Matlab interfaces are foreseen in 2009. The new API provides: - Data Type Management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances; - Pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus Object API be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus. Moreover, the UML graphical definition proved an effective and unambiguous way of documenting the system components. This document is composed of an abstract followed by the presentation transparencies. (authors)

  13. The Performance of an Object-Oriented, Parallel Operating System

    Directory of Open Access Journals (Sweden)

    David R. Kohr, Jr.

    1994-01-01

    Full Text Available The nascent and rapidly evolving state of parallel systems often leaves parallel application developers at the mercy of inefficient, inflexible operating system software. Given the relatively primitive state of parallel systems software, maximizing the performance of parallel applications not only requires judicious tuning of the application software, but occasionally, the replacement of specific system software modules with others that can more readily respond to the imposed pattern of resource demands. To assess the feasibility of application and performance tuning via malleable system software and to understand the performance penalties for detailed operating system performance data capture, we describe a set of performance instrumentation techniques for parallel, object-oriented operating systems and a set of performance experiments with Choices, an experimental, object-oriented operating system designed for use with parallel sys- tems. These performance experiments show that (a the performance overhead for operating system data capture is modest, (b the penalty for malleable, object-oriented operating systems is negligible, but (c techniques are needed to strictly enforce adherence of implementation to design if operating system modules are to be replaced.

  14. Status of the object-oriented EGS interface project

    International Nuclear Information System (INIS)

    Yacout, A.M.; Dunn, W.L.; Nelson, W.R.; Lui, P.; Bielajew, A.F.; Hirayama, H.; Namito, Y.

    2000-01-01

    The object-oriented EGS interface project seeks to simplify - using modern object-oriented and visual user interface techniques - the geometry and scoring aspects of the process of running the EGS code. The project will create an extremely user-friendly EGS package that retains and exploits the well documented physics advantages of EGS but removes the requirement that the user write HOWFAR and AUSGAB subroutines to define the geometry and scoring aspects of each new problem. In addition, several physics enhancements will be incorporated in EGS5. Although EGS5 will be able to be used in the traditional way - in a stand-alone fashion with users writing their own geometry and scoring subroutines - it is designed to be used in a completely new way - linked to a user interface through which users can manage all aspects of problem specification and code operation. This paper concentrates on the object-oriented user interface, which will dramatically simplify defining problem-specific detail for EGS. The 'EGS5 + VUI1' package will allow users to solve independent problems by run-time linking of the EGS5 code with class libraries that encapsulate the geometry and scoring aspects of each problem. Some simple example problems are considered in order to illustrate features of the EGS5 + VUI1 package. (author)

  15. Knowledge-based simulation using object-oriented programming

    Science.gov (United States)

    Sidoran, Karen M.

    1993-01-01

    Simulations have become a powerful mechanism for understanding and modeling complex phenomena. Their results have had substantial impact on a broad range of decisions in the military, government, and industry. Because of this, new techniques are continually being explored and developed to make them even more useful, understandable, extendable, and efficient. One such area of research is the application of the knowledge-based methods of artificial intelligence (AI) to the computer simulation field. The goal of knowledge-based simulation is to facilitate building simulations of greatly increased power and comprehensibility by making use of deeper knowledge about the behavior of the simulated world. One technique for representing and manipulating knowledge that has been enhanced by the AI community is object-oriented programming. Using this technique, the entities of a discrete-event simulation can be viewed as objects in an object-oriented formulation. Knowledge can be factual (i.e., attributes of an entity) or behavioral (i.e., how the entity is to behave in certain circumstances). Rome Laboratory's Advanced Simulation Environment (RASE) was developed as a research vehicle to provide an enhanced simulation development environment for building more intelligent, interactive, flexible, and realistic simulations. This capability will support current and future battle management research and provide a test of the object-oriented paradigm for use in large scale military applications.

  16. EMEN2: an object oriented database and electronic lab notebook.

    Science.gov (United States)

    Rees, Ian; Langley, Ed; Chiu, Wah; Ludtke, Steven J

    2013-02-01

    Transmission electron microscopy and associated methods, such as single particle analysis, two-dimensional crystallography, helical reconstruction, and tomography, are highly data-intensive experimental sciences, which also have substantial variability in experimental technique. Object-oriented databases present an attractive alternative to traditional relational databases for situations where the experiments themselves are continually evolving. We present EMEN2, an easy to use object-oriented database with a highly flexible infrastructure originally targeted for transmission electron microscopy and tomography, which has been extended to be adaptable for use in virtually any experimental science. It is a pure object-oriented database designed for easy adoption in diverse laboratory environments and does not require professional database administration. It includes a full featured, dynamic web interface in addition to APIs for programmatic access. EMEN2 installations currently support roughly 800 scientists worldwide with over 1/2 million experimental records and over 20 TB of experimental data. The software is freely available with complete source.

  17. Interactive system design using the complementarity of axiomatic design and fault tree analysis

    International Nuclear Information System (INIS)

    Heo, Gyun Young; Do, Sung Hee; Lee, Tae Sik

    2007-01-01

    To efficiently design safety-critical systems such as nuclear power plants, with requirement of high reliability, methodologies allowing for rigorous interactions between the synthesis and analysis processes have been proposed. This paper attempts to develop a reliability-centered design framework through an interactive process between Axiomatic Design (AD) and Fault Tree Analysis (FTA). Integrating AD and FTA into a single framework appears to be a viable solution, as they compliment each other with their unique advantages. AD provides a systematic synthesis tool while FTA is commonly used as a safety analysis tool. These methodologies build a design process that is less subjective, and they enable designers to develop insights that lead to solutions with improved reliability. Due to the nature of the two methodologies, the information involved in each process is complementary: a success tree versus a fault tree. Thus, at each step a system using AD is synthesized, and its reliability is then quantified using the FT derived from the AD synthesis process. The converted FT provides an opportunity to examine the completeness of the outcome from the synthesis process. This study presents an example of the design of a Containment Heat Removal System (CHRS). A case study illustrates the process of designing the CHRS with an interactive design framework focusing on the conversion of the AD process to FTA

  18. Decision tree and PCA-based fault diagnosis of rotating machinery

    Science.gov (United States)

    Sun, Weixiang; Chen, Jin; Li, Jiaqing

    2007-04-01

    After analysing the flaws of conventional fault diagnosis methods, data mining technology is introduced to fault diagnosis field, and a new method based on C4.5 decision tree and principal component analysis (PCA) is proposed. In this method, PCA is used to reduce features after data collection, preprocessing and feature extraction. Then, C4.5 is trained by using the samples to generate a decision tree model with diagnosis knowledge. At last the tree model is used to make diagnosis analysis. To validate the method proposed, six kinds of running states (normal or without any defect, unbalance, rotor radial rub, oil whirl, shaft crack and a simultaneous state of unbalance and radial rub), are simulated on Bently Rotor Kit RK4 to test C4.5 and PCA-based method and back-propagation neural network (BPNN). The result shows that C4.5 and PCA-based diagnosis method has higher accuracy and needs less training time than BPNN.

  19. Reliability analysis of the solar array based on Fault Tree Analysis

    International Nuclear Information System (INIS)

    Wu Jianing; Yan Shaoze

    2011-01-01

    The solar array is an important device used in the spacecraft, which influences the quality of in-orbit operation of the spacecraft and even the launches. This paper analyzes the reliability of the mechanical system and certifies the most vital subsystem of the solar array. The fault tree analysis (FTA) model is established according to the operating process of the mechanical system based on DFH-3 satellite; the logical expression of the top event is obtained by Boolean algebra and the reliability of the solar array is calculated. The conclusion shows that the hinges are the most vital links between the solar arrays. By analyzing the structure importance(SI) of the hinge's FTA model, some fatal causes, including faults of the seal, insufficient torque of the locking spring, temperature in space, and friction force, can be identified. Damage is the initial stage of the fault, so limiting damage is significant to prevent faults. Furthermore, recommendations for improving reliability associated with damage limitation are discussed, which can be used for the redesigning of the solar array and the reliability growth planning.

  20. Improving reliability of state estimation programming and computing suite based on analyzing a fault tree

    Directory of Open Access Journals (Sweden)

    Kolosok Irina

    2017-01-01

    Full Text Available Reliable information on the current state parameters obtained as a result of processing the measurements from systems of the SCADA and WAMS data acquisition and processing through methods of state estimation (SE is a condition that enables to successfully manage an energy power system (EPS. SCADA and WAMS systems themselves, as any technical systems, are subject to failures and faults that lead to distortion and loss of information. The SE procedure enables to find erroneous measurements, therefore, it is a barrier for the distorted information to penetrate into control problems. At the same time, the programming and computing suite (PCS implementing the SE functions may itself provide a wrong decision due to imperfection of the software algorithms and errors. In this study, we propose to use a fault tree to analyze consequences of failures and faults in SCADA and WAMS and in the very SE procedure. Based on the analysis of the obtained measurement information and on the SE results, we determine the state estimation PCS fault tolerance level featuring its reliability.

  1. Reliability analysis of the solar array based on Fault Tree Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Wu Jianing; Yan Shaoze, E-mail: yansz@mail.tsinghua.edu.cn [State Key Laboratory of Tribology, Department of Precision Instruments and Mechanology, Tsinghua University,Beijing 100084 (China)

    2011-07-19

    The solar array is an important device used in the spacecraft, which influences the quality of in-orbit operation of the spacecraft and even the launches. This paper analyzes the reliability of the mechanical system and certifies the most vital subsystem of the solar array. The fault tree analysis (FTA) model is established according to the operating process of the mechanical system based on DFH-3 satellite; the logical expression of the top event is obtained by Boolean algebra and the reliability of the solar array is calculated. The conclusion shows that the hinges are the most vital links between the solar arrays. By analyzing the structure importance(SI) of the hinge's FTA model, some fatal causes, including faults of the seal, insufficient torque of the locking spring, temperature in space, and friction force, can be identified. Damage is the initial stage of the fault, so limiting damage is significant to prevent faults. Furthermore, recommendations for improving reliability associated with damage limitation are discussed, which can be used for the redesigning of the solar array and the reliability growth planning.

  2. Human Factors Reliability Analysis for Assuring Nuclear Safety Using Fuzzy Fault Tree

    International Nuclear Information System (INIS)

    Eisawy, E.A.-F. I.; Sallam, H.

    2016-01-01

    In order to ensure effective prevention of harmful events, the risk assessment process cannot ignore the role of humans in the dynamics of accidental events and thus the seriousness of the consequences that may derive from them. Human reliability analysis (HRA) involves the use of qualitative and quantitative methods to assess the human contribution to risk. HRA techniques have been developed in order to provide human error probability values associated with operators’ tasks to be included within the broader context of system risk assessment, and are aimed at reducing the probability of accidental events. Fault tree analysis (FTA) is a graphical model that displays the various combinations of equipment failures and human errors that can result in the main system failure of interest. FTA is a risk analysis technique to assess likelihood (in a probabilistic context) of an event. The objective data available to estimate the likelihood is often missing, and even if available, is subject to incompleteness and imprecision or vagueness. Without addressing incompleteness and imprecision in the available data, FTA and subsequent risk analysis give a false impression of precision and correctness that undermines the overall credibility of the process. To solve this problem, qualitative justification in the context of failure possibilities can be used as alternative for quantitative justification. In this paper, we introduce the approach of fuzzy reliability as solution for fault tree analysis drawbacks. A new fuzzy fault tree method is proposed for the analysis of human reliability based on fuzzy sets and fuzzy operations t-norms, co-norms, defuzzification, and fuzzy failure probability. (author)

  3. Application of fault tree analysis for customer reliability assessment of a distribution power system

    International Nuclear Information System (INIS)

    Abdul Rahman, Fariz; Varuttamaseni, Athi; Kintner-Meyer, Michael; Lee, John C.

    2013-01-01

    A new method is developed for predicting customer reliability of a distribution power system using the fault tree approach with customer weighted values of component failure frequencies and downtimes. Conventional customer reliability prediction of the electric grid employs the system average (SA) component failure frequency and downtime that are weighted by only the quantity of the components in the system. These SA parameters are then used to calculate the reliability and availability of components in the system, and eventually to find the effect on customer reliability. Although this approach is intuitive, information is lost regarding customer disturbance experiences when customer information is not utilized in the SA parameter calculations, contributing to inaccuracies when predicting customer reliability indices in our study. Hence our new approach directly incorporates customer disturbance information in component failure frequency and downtime calculations by weighting these parameters with information of customer interruptions. This customer weighted (CW) approach significantly improves the prediction of customer reliability indices when applied to our reliability model with fault tree and two-state Markov chain formulations. Our method has been successfully applied to an actual distribution power system that serves over 2.1 million customers. Our results show an improved benchmarking performance on the system average interruption frequency index (SAIFI) by 26% between the SA-based and CW-based reliability calculations. - Highlights: ► We model the reliability of a power system with fault tree and two-state Markov chain. ► We propose using customer weighted component failure frequencies and downtimes. ► Results show customer weighted values perform superior to component average values. ► This method successfully incorporates customer disturbance information into the model.

  4. Digraph-fault tree methodology for the assessment of material control systems

    International Nuclear Information System (INIS)

    Lambert, H.E.; Lim, J.J.; Gilman, F.M.

    1979-01-01

    The Lawrence Livermore Laboratory, under contract to the United States Nuclear Regulatory Commission, is developing a procedure to assess the effectiveness of material control and accounting systems at nuclear fuel cycle facilities. The purpose of a material control and accounting system is to prevent the theft of special nuclear material such as plutonium or highly enriched uranium. This report presents the use of a directed graph and fault tree analysis methodology in the assessment procedure. This methodology is demonstrated by assessing a simulated material control system design, the Test Bed

  5. Efficient algorithms to assess component and gate importance in fault tree analysis

    International Nuclear Information System (INIS)

    Dutuit, Y.; Rauzy, A.

    2001-01-01

    One of the principal activities of risk assessment is either the ranking or the categorization of structures, systems and components with respect to their risk-significance or their safety-significance. Several measures, so-called importance factors, of such a significance have been proposed for the case where the support model is a fault tree. In this article, we show how binary decision diagrams can be use to assess efficiently a number of classical importance factors. This work completes the preliminary results obtained recently by Andrews and Sinnamon, and the authors. It deals also with the concept of joint reliability importance

  6. Failure mode analysis using state variables derived from fault trees with application

    International Nuclear Information System (INIS)

    Bartholomew, R.J.

    1982-01-01

    Fault Tree Analysis (FTA) is used extensively to assess both the qualitative and quantitative reliability of engineered nuclear power systems employing many subsystems and components. FTA is very useful, but the method is limited by its inability to account for failure mode rate-of-change interdependencies (coupling) of statistically independent failure modes. The state variable approach (using FTA-derived failure modes as states) overcomes these difficulties and is applied to the determination of the lifetime distribution function for a heat pipe-thermoelectric nuclear power subsystem. Analyses are made using both Monte Carlo and deterministic methods and compared with a Markov model of the same subsystem

  7. A general method dealing with correlations in uncertainty propagation in fault trees

    International Nuclear Information System (INIS)

    Qin Zhang

    1989-01-01

    This paper deals with the correlations among the failure probabilities (frequencies) of not only the identical basic events but also other basic events in a fault tree. It presents a general and simple method to include these correlations in uncertainty propagation. Two examples illustrate this method and show that neglecting these correlations results in large underestimation of the top event failure probability (frequency). One is the failure of the primary pump in a chemical reactor cooling system, the other example is an accident to a road transport truck carrying toxic waste. (author)

  8. Fault tree and reliability relationships for analyzing noncoherent two-state systems

    International Nuclear Information System (INIS)

    Alesso, H.P.; Benson, H.J.

    1980-01-01

    Recently, there has been interest in analyzing the noncoherent interactions that result from adversary theft of special nuclear material from reprocessing facilities. The actions of the adversary, acting in conflict with the reprocessing facility's material control and accounting system, may be viewed as a single noncoherent structure. This paper develops a basis for analyzing noncoherent structures by decomposing them into coherent subsystems. Both reliability and fault tree structure functions are used for this analysis. In addition, a bounding criterion is established for the reliability of statistically dependent noncoherent structures. (orig.)

  9. Calculating Nuclear Power Plant Vulnerability Using Integrated Geometry and Event/Fault-Tree Models

    International Nuclear Information System (INIS)

    Peplow, Douglas E.; Sulfredge, C. David; Sanders, Robert L.; Morris, Robert H.; Hann, Todd A.

    2004-01-01

    Since the events of September 11, 2001, the vulnerability of nuclear power plants to terrorist attacks has become a national concern. The results of vulnerability analysis are greatly influenced by the computational approaches used. Standard approximations used in fault-tree analysis are not applicable for attacks, where high component failure probabilities are expected; two methods that do work with high failure probabilities are presented. Different blast modeling approaches can also affect the end results. Modeling the structural details of facility buildings and the geometric layout of components within the buildings is required to yield meaningful results

  10. Results of a directed graph and fault tree assessment of a MC and A system

    International Nuclear Information System (INIS)

    Gilman, F.M.; Lambert, H.E.; Lim, J.J.

    1978-01-01

    An assessment of the effectiveness of the Material Control and Accounting System (MC and A) in a hypothetical nuclear facility, the TEST BED is presented. The key in assessing the TEST BED is the generation of adversary event sets. The adversary event sets are generated and analyzed by a directed graph (digraph) and fault tree procedure. Although the TEST BED is a system hardened against SNM theft, the assessment of the TEST BED finds several major weaknesses, and also indicates possible modifications to correct these weaknesses

  11. SALP-PC, a computer program for fault tree analysis on personal computers

    International Nuclear Information System (INIS)

    Contini, S.; Poucet, A.

    1987-01-01

    The paper presents the main characteristics of the SALP-PC computer code for fault tree analysis. The program has been developed in Fortran 77 on an Olivetti M24 personal computer (IBM compatible) in order to reach a high degree of portability. It is composed of six processors implementing the different phases of the analysis procedure. This particular structure presents some advantages like, for instance, the restart facility and the possibility to develop an event tree analysis code. The set of allowed logical operators, i.e. AND, OR, NOT, K/N, XOR, INH, together with the possibility to define boundary conditions, make the SALP-PC code a powerful tool for risk assessment. (orig.)

  12. A Block-Structure Concurrent Object-Oriented Language

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    1998-01-01

    The BETA programming language has been developed in the Scandinavian tradition for object-orientation based on Simula. In this tradition, support for modeling and design have been important design goals for programming language design. There has thus been two accompanying design criteria for BETA...... of conceptual means for understanding knowledge abuout the real world. It includes means such as concepts and phenomena, identification of objects, identification of classes, classification, generalization/specialization, multiple classification, refence- and part-of-composition, etc. In this paper we...

  13. Data clustering in C++ an object-oriented approach

    CERN Document Server

    Gan, Guojun

    2011-01-01

    Data clustering is a highly interdisciplinary field, the goal of which is to divide a set of objects into homogeneous groups such that objects in the same group are similar and objects in different groups are quite distinct. Thousands of theoretical papers and a number of books on data clustering have been published over the past 50 years. However, few books exist to teach people how to implement data clustering algorithms. This book was written for anyone who wants to implement or improve their data clustering algorithms. Using object-oriented design and programming techniques, Data Clusterin

  14. Predicting class testability using object-oriented metrics

    OpenAIRE

    Bruntink, Magiel; Deursen, Arie

    2004-01-01

    textabstractIn this paper we investigate factors of the testability of object-oriented software systems. The starting point is given by a study of the literature to obtain both an initial model of testability and existing OO metrics related to testability. Subsequently, these metrics are evaluated by means of two case studies of large Java systems for which JUnit test cases exist. The goal of this paper is to define and evaluate a set of metrics that can be used to assess the testability of t...

  15. OKBL: A language for representing object oriented knowledge

    International Nuclear Information System (INIS)

    Matsumoto, Y.; Sugiyai, I.; Ishikawa, K.

    1984-01-01

    Industrial system is operated by using numerous ''operator's knowledge'' about the system. Each knowledge can be regarded as an object and is represented and maintained as an 'ACTOR' and written in a language based on the actor concept. OKBL (Object Oriented Operational KnowledgeBase Management Language) is the language proposed here for this purpose and used in OKBS (a system based on OKBL). The OKBS inference mechanism on the knowledgebase written in OKBL is implemented by message passings among ACTORs. OKBS has been applied to the guidance system for the operators of electric power dispatch control stations

  16. Head First Object-Oriented Analysis and Design

    CERN Document Server

    McLaughlin, Brett D; West, David

    2006-01-01

    "Head First Object Oriented Analysis and Design is a refreshing look at subject of OOAD. What sets this book apart is its focus on learning. The authors have made the content of OOAD accessible, usable for the practitioner." Ivar Jacobson, Ivar Jacobson Consulting "I just finished reading HF OOA&D and I loved it! The thing I liked most about this book was its focus on why we do OOA&D-to write great software!" Kyle Brown, Distinguished Engineer, IBM "Hidden behind the funny pictures and crazy fonts is a serious, intelligent, extremely well-crafted presentation of OO Analysis and Design

  17. Object-Oriented Wavelet-Layered Digital Watermarking Technique

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-yun; YU Jue-bang; LI Ming-yu

    2005-01-01

    In this paper, an object-oriented digital watermarking technique is proposed in the wavelet domain for still images. According to the difference of recognition degree of the human eye to the different region of the image, the image is divided into the interested region and uninterested region of human eye vision in this scheme. Using the relativity of position and the difference to ocular sensitivity of the multiresolution wavelet among each subband, the image is processed with layered watermarking append technique. Experimental results show that the proposed technique successfully survives image processing operations, additive noise and JPEG compression.

  18. A new weighted fuzzy grammar on object oriented database queries

    Directory of Open Access Journals (Sweden)

    Ali Haroonabadi

    2012-08-01

    Full Text Available The fuzzy object oriented database model is often used to handle the existing imprecise and complicated objects for many real-world applications. The main focus of this paper is on fuzzy queries and tries to analyze a complicated and complex query to get more meaningful and closer responses. The method permits the user to provide the possibility of allocating the weight to various parts of the query, which makes it easier to follow better goals and return the target objects.

  19. The objected oriented programming: application to potential well system

    International Nuclear Information System (INIS)

    Franco Garcia, A.

    1995-01-01

    The Objected Oriented Programming is a new methodology which allows us to organize the code in a different way than the structured languages. This article describes the main characteristics of the Language C++, and advantages in physics computing and in building a graphic user interface. The solution of a classical exercise in one-dimensional Quantum Mechanics: to find out the energy levels and the wave functions of a potential well system, allows us to set a class hierarchy, use the concepts of overloading and polymorphism, and read or write data to disk through the input/output streams. (Author) 4 refs

  20. Beginning Java programming the object-oriented approach

    CERN Document Server

    Baesens, Bart; vanden Broucke, Seppe

    2015-01-01

    A comprehensive Java guide, with samples, exercises, case studies, and step-by-step instruction Beginning Java Programming: The Object Oriented Approach is a straightforward resource for getting started with one of the world's most enduringly popular programming languages. Based on classes taught by the authors, the book starts with the basics and gradually builds into more advanced concepts. The approach utilizes an integrated development environment that allows readers to immediately apply what they learn, and includes step-by-step instruction with plenty of sample programs. Each chapter c

  1. Designing an object-oriented scheme for accelerator equipment control

    International Nuclear Information System (INIS)

    Trofimov, N.N.

    1994-01-01

    The object-oriented analysis (OOA) and design (OOD) formalisms developed by Project Technology Inc. is presented in this report. The method was originated in 1979 with the analysis phase of a large real-time project at Lawrence Berkeley Laboratory and since that time has been used in several large-scale industrial projects. It is supported by the Teamwork CASE package from Cadre Technologies Inc. For introducing basic concepts and definitions of the OOA/OOD, a typical accelerator device example: remotely controllable power supply which is used to power magnets in an accelerator beam transfer line is used through out this report. 18 refs., 18 figs

  2. Dynamic Object Oriented Requirements System (DOORS) System Test Plan

    International Nuclear Information System (INIS)

    JOHNSON, A.L.

    2000-01-01

    The U. S. Department of Energy, Office of River Protection (ORP) will use the Dynamic Object Oriented Requirements System (DOORS) as a tool to assist in identifying, capturing, and maintaining the necessary and sufficient set of requirements for accomplishing the ORP mission. By managing requirements as one integrated set, the ORP will be able to carry out its mission more efficiently and effectively. DOORS is a Commercial-Off-The-Shelf (COTS) requirements management tool. The tool has not been customized for the use of the PIO, at this time

  3. A novice's process of object-oriented programming

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Kölling, Michael

    2006-01-01

    Exposing students to the process of programming is merely implied but not explicitly addressed in texts on programming which appear to deal with 'program' as a noun rather than as a verb.We present a set of principles and techniques as well as an informal but systematic process of decomposing...... a programming problem. Two examples are used to demonstrate the application of process and techniques.The process is a carefully down-scaled version of a full and rich software engineering process particularly suited for novices learning object-oriented programming. In using it, we hope to achieve two things...

  4. Taking an object-oriented view of accelerators

    International Nuclear Information System (INIS)

    Nishimura, H.

    1995-01-01

    It was almost a decade ago that accelerator experts were introduced to the concept of object-oriented programming. This new methodology was expected to play a key role in solving various software problems. Today, there seems be nothing that prevents us from taking advantage of this new technology. In fact, we are often forced to catch up with the computer industry's new standards. This is especially true for graphics programming. While evaluating the benefits of using this new technology, we must also evaluate whether it is as effective as it was claimed. In this paper, we discuss these issues based on experiences at the Advanced Light Source

  5. Managing the BaBar object oriented database

    International Nuclear Information System (INIS)

    Hasan, A.; Trunov, A.

    2001-01-01

    The BaBar experiment stores its data in an Object Oriented federated database supplied by Objectivity/DB(tm). This database is currently 350TB in size and is expected to increase considerably as the experiment matures. Management of this database requires careful planning and specialized tools in order to make the data available to physicists in an efficient and timely manner. The authors discuss the operational issues and management tools that were developed during the previous run to deal with this vast quantity of data at SLAC

  6. Object-Oriented Software Tools for the Construction of Preconditioners

    Directory of Open Access Journals (Sweden)

    Eva Mossberg

    1997-01-01

    Full Text Available In recent years, there has been considerable progress concerning preconditioned iterative methods for large and sparse systems of equations arising from the discretization of differential equations. Such methods are particularly attractive in the context of high-performance (parallel computers. However, the implementation of a preconditioner is a nontrivial task. The focus of the present contribution is on a set of object-oriented software tools that support the construction of a family of preconditioners based on fast transforms. By combining objects of different classes, it is possible to conveniently construct any preconditioner within this family.

  7. Business engineering. Generic Software Architecture in an Object Oriented View

    Directory of Open Access Journals (Sweden)

    Mihaela MURESAN

    2006-01-01

    Full Text Available The generic software architecture offers a solution for the the information system's development and implementation. A generic software/non-software model could be developed by integrating the enterprise blueprint concept (Zachman and the object oriented paradigm (Coad's archetype concept. The standardization of the generic software architecture for various specific software components could be a direction of crucial importance, offering the guarantee of the quality of the model and increasing the efficiency of the design, development and implementation of the software. This approach is also useful for the implementation of the ERP systems designed to fit the user’s particular requirements.

  8. An architecture for object-oriented intelligent control of power systems in space

    Science.gov (United States)

    Holmquist, Sven G.; Jayaram, Prakash; Jansen, Ben H.

    1993-01-01

    A control system for autonomous distribution and control of electrical power during space missions is being developed. This system should free the astronauts from localizing faults and reconfiguring loads if problems with the power distribution and generation components occur. The control system uses an object-oriented simulation model of the power system and first principle knowledge to detect, identify, and isolate faults. Each power system component is represented as a separate object with knowledge of its normal behavior. The reasoning process takes place at three different levels of abstraction: the Physical Component Model (PCM) level, the Electrical Equivalent Model (EEM) level, and the Functional System Model (FSM) level, with the PCM the lowest level of abstraction and the FSM the highest. At the EEM level the power system components are reasoned about as their electrical equivalents, e.g, a resistive load is thought of as a resistor. However, at the PCM level detailed knowledge about the component's specific characteristics is taken into account. The FSM level models the system at the subsystem level, a level appropriate for reconfiguration and scheduling. The control system operates in two modes, a reactive and a proactive mode, simultaneously. In the reactive mode the control system receives measurement data from the power system and compares these values with values determined through simulation to detect the existence of a fault. The nature of the fault is then identified through a model-based reasoning process using mainly the EEM. Compound component models are constructed at the EEM level and used in the fault identification process. In the proactive mode the reasoning takes place at the PCM level. Individual components determine their future health status using a physical model and measured historical data. In case changes in the health status seem imminent the component warns the control system about its impending failure. The fault isolation

  9. The integration methods of fuzzy fault mode and effect analysis and fault tree analysis for risk analysis of yogurt production

    Science.gov (United States)

    Aprilia, Ayu Rizky; Santoso, Imam; Ekasari, Dhita Murita

    2017-05-01

    Yogurt is a product based on milk, which has beneficial effects for health. The process for the production of yogurt is very susceptible to failure because it involves bacteria and fermentation. For an industry, the risks may cause harm and have a negative impact. In order for a product to be successful and profitable, it requires the analysis of risks that may occur during the production process. Risk analysis can identify the risks in detail and prevent as well as determine its handling, so that the risks can be minimized. Therefore, this study will analyze the risks of the production process with a case study in CV.XYZ. The method used in this research is the Fuzzy Failure Mode and Effect Analysis (fuzzy FMEA) and Fault Tree Analysis (FTA). The results showed that there are 6 risks from equipment variables, raw material variables, and process variables. Those risks include the critical risk, which is the risk of a lack of an aseptic process, more specifically if starter yogurt is damaged due to contamination by fungus or other bacteria and a lack of sanitation equipment. The results of quantitative analysis of FTA showed that the highest probability is the probability of the lack of an aseptic process, with a risk of 3.902%. The recommendations for improvement include establishing SOPs (Standard Operating Procedures), which include the process, workers, and environment, controlling the starter of yogurt and improving the production planning and sanitation equipment using hot water immersion.

  10. The fault tree as a tool in safety analysis in nuclear power plants

    International Nuclear Information System (INIS)

    Waddington, J.G.; Wild, A.

    1981-01-01

    Modern safety analysis must be able to identify realistic failure modes based on realistic operation and system malfunction, demonstrate rigorously that adequate independence exists between a malfunctioning system and those other systems required to mitigate the effects of the malfunction, design adequate reliability into systems important to plant safety and to demonstrate rigorously that the design reliability is met in operation, and identify the realistic actions expected of the operator. Fault trees, which have proved to be a powerful tool to achieve these objectives, are inevitably large and must be computerized. However, the computerized system must be simple, must allow merging of branches developed independently, must provide for easy modification and the processing must be economical and easily accessible. A new system for displaying, plotting and analysing fault trees has been developed and implemented on a small computer at AECB to demonstrate the viability of the approach to designers, and to provide a tool to assess licensee's submissions on failure modes of support systems such as electrical, service water and air, and to assess reliability predictions for special safety systems. (author)

  11. Safety analyses of potential exposure in medical irradiation plants by Fuzzy Fault Tree

    International Nuclear Information System (INIS)

    Casamirra, Maddalena; Castiglia, Francesco; Giardina, Mariarosa; Tomarchio, Elio

    2008-01-01

    The results of Fuzzy Fault Tree (FFT) analyses of various accidental scenarios, which involve the operators in potential exposures inside an High Dose Rate (HDR) remote after-loading systems for use in brachytherapy, are reported. To carry out fault tree analyses by means of fuzzy probabilities, the TREEZZY2 computer code is used. Moreover, the HEART (Human Error Assessment and Reduction Technique) model, properly modified on the basis of the fuzzy approach, has been employed to assess the impact of performances haping and error-promoting factors in the context of the accidental events. The assessment of potential dose values for some identified accidental scenarios allows to consider, for a particular event, a fuzzy uncertainty range in potential dose estimate. The availability of lower and upper limits allows evaluating the possibility of optimization of the installation from the point of view of radiation protection. The adequacy of the training and information program for staff and patients (and their family members) and the effectiveness of behavioural rules and safety procedures were tested. Some recommendations on procedures and equipment to reduce the risk of radiological exposure are also provided. (author)

  12. A systematic fault tree analysis based on multi-level flow modeling

    International Nuclear Information System (INIS)

    Gofuku, Akio; Ohara, Ai

    2010-01-01

    The fault tree analysis (FTA) is widely applied for the safety evaluation of a large-scale and mission-critical system. Because the potential of the FTA, however, strongly depends on human skill of analyzers, problems are pointed out in (1) education and training, (2) unreliable quality, (3) necessity of expertise knowledge, and (4) update of FTA results after the reconstruction of a target system. To get rid of these problems, many techniques to systematize FTA activities by applying computer technologies have been proposed. However, these techniques only use structural information of a target system and do not use functional information that is one of important properties of an artifact. The principle of FTA is to trace comprehensively cause-effect relations from a top undesirable effect to anomaly causes. The tracing is similar to the causality estimation technique that the authors proposed to find plausible counter actions to prevent or to mitigate the undesirable behavior of plants based on the model by a functional modeling technique, Multilevel Flow Modeling (MFM). The authors have extended this systematic technique to construct a fault tree (FT). This paper presents an algorithm of systematic construction of FT based on MFM models and demonstrates the applicability of the extended technique by the FT construction result of a cooling plant of nitric acid. (author)

  13. Presentation of common cause failures in fault tree structure of Krsko PSA : an historical overview

    International Nuclear Information System (INIS)

    Vrbanic, I.; Kosutic, I.; Vukovic, I.; Simic, Z.

    2003-01-01

    Failure of multiple components due to a common cause represents one of the most important issues in evaluation of system reliability or unavailability. The frequency of such events has relatively low expectancy, when compared to random failures, which affect individual components. However, in many cases the consequence is a direct loss of safety system or mitigative safety function. For this reason, the modeling of a common cause failure (CCF) and its presentation in fault tree structure is of the uttermost importance in probabilistic safety analyses (PSA). During the past decade, PSA model of Krsko NPP has undergone many small changes and a couple of major ones in fulfilling its basic purpose, which was serving as a tool for providing an appropriate information on the risk associated with actual plant design and operation. All changes to Krsko PSA model were undertaken in order to make it a better tool and / or to make it represent the plant in more accurate manner. The paper provides an overview of changes in CCF modeling in the fault tree structure from the initial PSA model development till present. (author)

  14. Testing digital safety system software with a testability measure based on a software fault tree

    International Nuclear Information System (INIS)

    Sohn, Se Do; Hyun Seong, Poong

    2006-01-01

    Using predeveloped software, a digital safety system is designed that meets the quality standards of a safety system. To demonstrate the quality, the design process and operating history of the product are reviewed along with configuration management practices. The application software of the safety system is developed in accordance with the planned life cycle. Testing, which is a major phase that takes a significant time in the overall life cycle, can be optimized if the testability of the software can be evaluated. The proposed testability measure of the software is based on the entropy of the importance of basic statements and the failure probability from a software fault tree. To calculate testability, a fault tree is used in the analysis of a source code. With a quantitative measure of testability, testing can be optimized. The proposed testability can also be used to demonstrate whether the test cases based on uniform partitions, such as branch coverage criteria, result in homogeneous partitions that is known to be more effective than random testing. In this paper, the testability measure is calculated for the modules of a nuclear power plant's safety software. The module testing with branch coverage criteria required fewer test cases if the module has higher testability. The result shows that the testability measure can be used to evaluate whether partitions have homogeneous characteristics

  15. Timing analysis of safety properties using fault trees with time dependencies and timed state-charts

    International Nuclear Information System (INIS)

    Magott, Jan; Skrobanek, Pawel

    2012-01-01

    Behavior in time domain is often crucial for safety critical systems. Standard fault trees cannot express time-dependent behavior. In the paper, timing analysis of safety properties using fault trees with time dependencies (FTTDs) and timed state-charts is presented. A new version of timed state-charts (TSCs) is also proposed. These state-charts can model the dynamics of technical systems, e.g. controllers, controlled objects, and people. In TSCs, activity and communication times are represented by time intervals. In the proposed approach the structure of FTTD is fixed by a human. Time properties of events and gates of FTTD are expressed by time intervals, and are calculated using TSCs. The minimal and maximal values of these time intervals of FTTD can be calculated by finding paths with minimal and maximal time lengths in TSCs, which is an NP-hard problem. In order to reduce the practical complexity of computing the FTTD time parameters, some reductions of TSCs are defined in the paper, such as sequential, alternative, loop (iteration), and parallel. Some of the reductions are intuitive, in case of others—theorems are required. Computational complexity of each reduction is not greater than linear in the size of reduced TSC. Therefore, the obtained results enable decreasing of the costs of FTTD time parameters calculation when system dynamics is expressed by TSCs. Case study of a railroad crossing with a controller that controls semaphores, gate, light-audio signal close to the gate will be analyzed.

  16. The completeness of fault tree analysis in the presence of dependencies

    International Nuclear Information System (INIS)

    Hughes, R.P.

    1989-02-01

    Existing standard fault tree assessments of systems do not include an assessment of the effects of dependencies in an integrated fashion, but simply add on a ''common cause cut-off''. To support the values used for this cut-off, cut-sets involving certain groups of components susceptible to dependent failure can be assessed using the Distributed Failure Probability method. These rank one contributions do not cover all the possibilities, however, so there is an outstanding need for an integrated procedure for dependent failure assessment of systems which allows for all ranks of cut-set. The purpose of this note is to provide such a procedure which builds upon the standard approach to fault tree analysis. In this standard approach, only a limited number of cut-sets is found, and they are evaluated assuming independence of their components. So, some cut-sets are neglected which could be important contributors to the system failure probability if their components are not independent of each other. The procedure developed therefore deals with this truncation problem and with dependency together. The result is a practical and efficient method for bounding system failure probabilities. The method is a progressive one, whereby this bound is reduced as necessary by a more refined analysis. A simple example is used to illustrate the procedure. (author)

  17. Application fo fault tree methodology in the risk analysis of complex systems

    International Nuclear Information System (INIS)

    Vasconcelos, V. de.

    1984-01-01

    This study intends to describe the fault tree methodology and apply it to risk assessment of complex facilities. In the methodology description, it has been attempted to provide all the pertinent basic information, pointing out its more important aspects like, for instance, fault tree construction, evaluation techniques and their use in risk and reliability assessment of a system. In view of their importance, topics like common mode failures, human errors, data bases used in the calculations, and uncertainty evaluation of the results, will be discussed separately, each one in a chapter. For the purpose of applying the methodology, it was necessary to implement computer codes normally used for this kind of analysis. The computer codes PREP, KITT and SAMPLE, written in FORTRAN IV, were chosen, due to their availability and to the fact that they have been used in important studies of the nuclear area, like Wash-1400. With these codes, the probability of occurence of excessive pressure in the main system of the component test loop - CTC, of CDTN, was evaluated. (Author) [pt

  18. Failure analysis of storage tank component in LNG regasification unit using fault tree analysis method (FTA)

    Science.gov (United States)

    Mulyana, Cukup; Muhammad, Fajar; Saad, Aswad H.; Mariah, Riveli, Nowo

    2017-03-01

    Storage tank component is the most critical component in LNG regasification terminal. It has the risk of failure and accident which impacts to human health and environment. Risk assessment is conducted to detect and reduce the risk of failure in storage tank. The aim of this research is determining and calculating the probability of failure in regasification unit of LNG. In this case, the failure is caused by Boiling Liquid Expanding Vapor Explosion (BLEVE) and jet fire in LNG storage tank component. The failure probability can be determined by using Fault Tree Analysis (FTA). Besides that, the impact of heat radiation which is generated is calculated. Fault tree for BLEVE and jet fire on storage tank component has been determined and obtained with the value of failure probability for BLEVE of 5.63 × 10-19 and for jet fire of 9.57 × 10-3. The value of failure probability for jet fire is high enough and need to be reduced by customizing PID scheme of regasification LNG unit in pipeline number 1312 and unit 1. The value of failure probability after customization has been obtained of 4.22 × 10-6.

  19. Mediman: Object oriented programming approach for medical image analysis

    International Nuclear Information System (INIS)

    Coppens, A.; Sibomana, M.; Bol, A.; Michel, C.

    1993-01-01

    Mediman is a new image analysis package which has been developed to analyze quantitatively Positron Emission Tomography (PET) data. It is object-oriented, written in C++ and its user interface is based on InterViews on top of which new classes have been added. Mediman accesses data using external data representation or import/export mechanism which avoids data duplication. Multimodality studies are organized in a simple database which includes images, headers, color tables, lists and objects of interest (OOI's) and history files. Stored color table parameters allow to focus directly on the interesting portion of the dynamic range. Lists allow to organize the study according to modality, acquisition protocol, time and spatial properties. OOI's (points, lines and regions) are stored in absolute 3-D coordinates allowing correlation with other co-registered imaging modalities such as MRI or SPECT. OOI's have visualization properties and are organized into groups. Quantitative ROI analysis of anatomic images consists of position, distance, volume calculation on selected OOI's. An image calculator is connected to mediman. Quantitation of metabolic images is performed via profiles, sectorization, time activity curves and kinetic modeling. Mediman is menu and mouse driven, macro-commands can be registered and replayed. Its interface is customizable through a configuration file. The benefit of the object-oriented approach are discussed from a development point of view

  20. Ferromanganese Furnace Modelling Using Object-Oriented Principles

    Energy Technology Data Exchange (ETDEWEB)

    Wasboe, S.O.

    1996-12-31

    This doctoral thesis defines an object-oriented framework for aiding unit process modelling and applies it to model high-carbon ferromanganese furnaces. A framework is proposed for aiding modelling of the internal topology and the phenomena taking place inside unit processes. Complex unit processes may consist of a number of zones where different phenomena take place. A topology is therefore defined for the unit process itself, which shows the relations between the zones. Inside each zone there is a set of chemical species and phenomena, such as reactions, phase transitions, heat transfer etc. A formalized graphical methodology is developed as a tool for modelling these zones and their interaction. The symbols defined in the graphical framework are associated with objects and classes. The rules for linking the objects are described using OMT (Object Modeling Technique) diagrams and formal language formulations. The basic classes that are defined are implemented using the C++ programming language. The ferromanganese process is a complex unit process. A general description of the process equipment is given, and a detailed discussion of the process itself and a system theoretical overview of it. The object-oriented framework is then used to develop a dynamic model based on mass and energy balances. The model is validated by measurements from an industrial furnace. 101 refs., 119 figs., 20 tabs.

  1. An application of object-oriented programming to process simulation

    International Nuclear Information System (INIS)

    Robinson, J.T.; Otaduy, P.J.

    1988-01-01

    This paper discusses the application of object-oriented programming to dynamic simulation of continuous processes. Processes may be modeled using this technique as a collection of objects which communicate with each other via message passing. Arriving messages invoke methods that describe the state and/or dynamic behavior of the receiving object. The objects fall into four broad categories actual plant components such as pumps, pipes, and tanks, abstract objects such as heat sources and conductors, plant systems such as flow loops, and simulation control and interface objects. This technique differs from traditional approaches to process simulation, in which the process is represented by either a system of differential equations or a block diagram of mathematical operators. The use of objects minimizes the representational gap between the model and actual process. From the users point of view, construction of a simulation model becomes equivalent to drawing a plant schematic. As an example application, a package developed for the simulation of nuclear power plants is described. The package allows users to build simulation models by selecting iconic representations of plant components from a menu and connecting them with a mouse. Objects for generating a mathematical model of the system and for controlling the simulation are automatically generated, freeing the user to concentrate on describing his process. This example illustrates the use of object-oriented programming to create a highly interactive and automated simulation environment. 2 figs

  2. PAC++: Object-oriented platform for accelerator codes

    International Nuclear Information System (INIS)

    Malitsky, N.; Reshetov, A.; Bourianoff, G.

    1994-06-01

    Software packages in accelerator physics have relatively long life cycles. They had been developed and used for a wide range of accelerators in the past as well as for the current projects. For example, the basic algorithms written in the first accelerator Program TRANSPORT are actual for design of most magnet systems. Most of these packages had been implemented on Fortran. But this language is rather inconvenient as a basic language for large integrated projects that possibly could include real-time data acquisition, data base access, graphic riser interface modules (GUI), arid other features. Some later accelerator programs had been based on object-oriented tools (primarily, C++ language). These range from systems for advanced theoretical studies to control system software. For the new generations of accelerators it would be desirable to have an integrated platform in which all simulation and control tasks will be considered with one point of view. In this report the basic principles of an object-oriented platform for accelerator research software (PAC++) are suggested and analyzed. Primary objectives of this work are to enable efficient self-explaining realization of the accelerator concepts and to provide an integrated environment for the updating and the developing of the code

  3. Channels as Objects in Concurrent Object-Oriented Programming

    Directory of Open Access Journals (Sweden)

    Joana Campos

    2011-10-01

    Full Text Available There is often a sort of a protocol associated to each class, stating when and how certain methods should be called. Given that this protocol is, if at all, described in the documentation accompanying the class, current mainstream object-oriented languages cannot provide for the verification of client code adherence against the sought class behaviour. We have defined a class-based concurrent object-oriented language that formalises such protocols in the form of usage types. Usage types are attached to class definitions, allowing for the specification of (1 the available methods, (2 the tests clients must perform on the result of methods, and (3 the object status - linear or shared - all of which depend on the object's state. Our work extends the recent approach on modular session types by eliminating channel operations, and defining the method call as the single communication primitive in both sequential and concurrent settings. In contrast to previous works, we define a single category for objects, instead of distinct categories for linear and for shared objects, and let linear objects evolve into shared ones. We introduce a standard sync qualifier to prevent thread interference in certain operations on shared objects. We formalise the language syntax, the operational semantics, and a type system that enforces by static typing that methods are called only when available, and by a single client if so specified in the usage type. We illustrate the language via a complete example.

  4. Decision-table development for use with the CAT code for the automated fault-tree construction

    International Nuclear Information System (INIS)

    Wu, J.S.; Salem, S.L.; Apostolakis, G.E.

    1977-01-01

    A library of decision tables to be used in connection with the CAT computer code for the automated construction of fault trees is presented. A decision table is constructed for each component type describing the output of the component in terms of its inputs and its internal states. In addition, a modification of the CAT code that couples it with a fault tree analysis code is presented. This report represents one aspect of a study entitled, 'A General Evaluation Approach to Risk-Benefit for Large Technological Systems, and Its Application to Nuclear Power.'

  5. Object-oriented programming techniques for the AGS Booster

    International Nuclear Information System (INIS)

    Skelly, J.F.

    1991-01-01

    The applications software developed for the control system of the AGS Booster Project was written in the object-oriented language, C++. A the start of the Booster Project, the programming staff of the AGS Controls Section comprised some dozen programmer/analysts, all highly fluent in C but novices in C++. During the coarse of this project, nearly the entire staff converted to using C++ for a large fraction of their assignments. Over 100 C++ software modules are now available for Booster and general AGS use, of which a large fraction are broadly applicable tools. The transition from C to C++ from a managerial perspective is discussed and an overview is provided of the ways in which object classes have been applied in Booster software development

  6. Object-oriented programming techniques for the AGS Booster

    International Nuclear Information System (INIS)

    Skelly, J.F.

    1992-01-01

    The applications software developed for the control system of the AGS Booster Project was written in the object-oriented language, C++. At the start of the Booster Project, the programming staff of the AGS Controls Section comprised some dozen programmer/analysts, all highly fluent in C but novices in C++. During the course of this project, nearly the entire staff converted to using C++ for a large fraction of their assignments. Over 100 C++ software modules are now available both for Booster and general AGS use, of which a large fraction are broadly applicable tools. The transition from C to C++ from a managerial perspective is discussed and an overview is provided of the ways in which object classes have been applied in Booster software development. (author)

  7. Building a genome database using an object-oriented approach.

    Science.gov (United States)

    Barbasiewicz, Anna; Liu, Lin; Lang, B Franz; Burger, Gertraud

    2002-01-01

    GOBASE is a relational database that integrates data associated with mitochondria and chloroplasts. The most important data in GOBASE, i. e., molecular sequences and taxonomic information, are obtained from the public sequence data repository at the National Center for Biotechnology Information (NCBI), and are validated by our experts. Maintaining a curated genomic database comes with a towering labor cost, due to the shear volume of available genomic sequences and the plethora of annotation errors and omissions in records retrieved from public repositories. Here we describe our approach to increase automation of the database population process, thereby reducing manual intervention. As a first step, we used Unified Modeling Language (UML) to construct a list of potential errors. Each case was evaluated independently, and an expert solution was devised, and represented as a diagram. Subsequently, the UML diagrams were used as templates for writing object-oriented automation programs in the Java programming language.

  8. Object Oriented Approach to Software Development for LHC Experiments

    CERN Multimedia

    Tummers, B J; Day, C; Innocente, V; Mount, R; Visser, E; Burnett, T H; Balke, C

    2002-01-01

    % RD41 \\\\ \\\\ We propose to study the viability of the Object Oriented~(OO) approach for developing the code for LHC experiments. The authors of this proposal will learn the key issues of this approach:~~OO analysis and design. Several methodologies will be studied to select the most appropriate for the High Energy Physics case. Some Computer Aided Software Engineering tools and implementation languages will be evaluated. These studies will be carried out with various well-defined prototypes, some of which have been defined in a preceding study and some of which will be defined in the course of this R\\&D project. We propose to also study in this project how the OO approach enhances a different, and hopefully better, project management. Management tools will be tried and professional training will be organized.

  9. An object-oriented mobile health system with usability features.

    Science.gov (United States)

    Escarfullet, Krystle; Moore, Cantera; Tucker, Shari; Wei, June

    2012-01-01

    Mobile health (m-health) comprises the concept of utilising mobile devices to carry out the task of viewing electronic medical records, reserving medical appointments with a patient's medical provider and electronically refilling prescriptions. This paper aims at developing a m-health system to improve usability from a user's perspective. Specifically, it first developed a m-health model by logically linking characteristics of the m-health system together based on information flows. Then, the system requirements were collected by using a developed questionnaire. These requirements were structured and further in-depth analysis was conducted by using an object-oriented approach based on unified modelling language, such as use-case, sequence and analysis class diagrams. This research will be beneficial to decision makers and developers in the mobile healthcare industry.

  10. An object-oriented extension for debugging the virtual machine

    Energy Technology Data Exchange (ETDEWEB)

    Pizzi, Jr, Robert G. [Univ. of California, Davis, CA (United States)

    1994-12-01

    A computer is nothing more then a virtual machine programmed by source code to perform a task. The program`s source code expresses abstract constructs which are compiled into some lower level target language. When a virtual machine breaks, it can be very difficult to debug because typical debuggers provide only low-level target implementation information to the software engineer. We believe that the debugging task can be simplified by introducing aspects of the abstract design and data into the source code. We introduce OODIE, an object-oriented extension to programming languages that allows programmers to specify a virtual environment by describing the meaning of the design and data of a virtual machine. This specification is translated into symbolic information such that an augmented debugger can present engineers with a programmable debugging environment specifically tailored for the virtual machine that is to be debugged.

  11. Object-oriented design of medical imaging software.

    Science.gov (United States)

    Ligier, Y; Ratib, O; Logean, M; Girard, C; Perrier, R; Scherrer, J R

    1994-01-01

    A special software package for interactive display and manipulation of medical images was developed at the University Hospital of Geneva, as part of a hospital wide Picture Archiving and Communication System (PACS). This software package, called Osiris, was especially designed to be easily usable and adaptable to the needs of noncomputer-oriented physicians. The Osiris software has been developed to allow the visualization of medical images obtained from any imaging modality. It provides generic manipulation tools, processing tools, and analysis tools more specific to clinical applications. This software, based on an object-oriented paradigm, is portable and extensible. Osiris is available on two different operating systems: the Unix X-11/OSF-Motif based workstations, and the Macintosh family.

  12. Ten years of Object-Oriented analysis on H1

    International Nuclear Information System (INIS)

    Laycock, Paul

    2012-01-01

    Over a decade ago, the H1 Collaboration decided to embrace the object-oriented paradigm and completely redesign its data analysis model and data storage format. The event data model, based on the ROOT framework, consists of three layers - tracks and calorimeter clusters, identified particles and finally event summary data - with a singleton class providing unified access. This original solution was then augmented with a fourth layer containing user-defined objects. This contribution will summarise the history of the solutions used, from modifications to the original design, to the evolution of the high-level end-user analysis object framework which is used by H1 today. Several important issues are addressed - the portability of expert knowledge to increase the efficiency of data analysis, the flexibility of the framework to incorporate new analyses, the performance and ease of use, and lessons learned for future projects.

  13. StrateGene: object-oriented programming in molecular biology.

    Science.gov (United States)

    Carhart, R E; Cash, H D; Moore, J F

    1988-03-01

    This paper describes some of the ways that object-oriented programming methodologies have been used to represent and manipulate biological information in a working application. When running on a Xerox 1100 series computer, StrateGene functions as a genetic engineering workstation for the management of information about cloning experiments. It represents biological molecules, enzymes, fragments, and methods as classes, subclasses, and members in a hierarchy of objects. These objects may have various attributes, which themselves can be defined and classified. The attributes and their values can be passed from the classes of objects down to the subclasses and members. The user can modify the objects and their attributes while using them. New knowledge and changes to the system can be incorporated relatively easily. The operations on the biological objects are associated with the objects themselves. This makes it easier to invoke them correctly and allows generic operations to be customized for the particular object.

  14. Analysis of manufacturing based on object oriented discrete event simulation

    Directory of Open Access Journals (Sweden)

    Eirik Borgen

    1990-01-01

    Full Text Available This paper describes SIMMEK, a computer-based tool for performing analysis of manufacturing systems, developed at the Production Engineering Laboratory, NTH-SINTEF. Its main use will be in analysis of job shop type of manufacturing. But certain facilities make it suitable for FMS as well as a production line manufacturing. This type of simulation is very useful in analysis of any types of changes that occur in a manufacturing system. These changes may be investments in new machines or equipment, a change in layout, a change in product mix, use of late shifts, etc. The effects these changes have on for instance the throughput, the amount of VIP, the costs or the net profit, can be analysed. And this can be done before the changes are made, and without disturbing the real system. Simulation takes into consideration, unlike other tools for analysis of manufacturing systems, uncertainty in arrival rates, process and operation times, and machine availability. It also shows the interaction effects a job which is late in one machine, has on the remaining machines in its route through the layout. It is these effects that cause every production plan not to be fulfilled completely. SIMMEK is based on discrete event simulation, and the modeling environment is object oriented. The object oriented models are transformed by an object linker into data structures executable by the simulation kernel. The processes of the entity objects, i.e. the products, are broken down to events and put into an event list. The user friendly graphical modeling environment makes it possible for end users to build models in a quick and reliable way, using terms from manufacturing. Various tests and a check of model logic are helpful functions when testing validity of the models. Integration with software packages, with business graphics and statistical functions, is convenient in the result presentation phase.

  15. EVIO - A lightweight object-oriented I/O package

    International Nuclear Information System (INIS)

    Wolin, E.; Abbott, D.; Gurjyan, V.; Heyes, G.; Jastrzembski, E.; Lawrence, D.; Timmer, C.

    2008-01-01

    The EVIO package implements I/O between disk and an in-memory hierarchical object tree. Tree nodes are either container nodes, holding other nodes, or leaf nodes, containing any amount of data of a single type (int64 t ,..., int8 t , float, double, and string). Trees can easily be constructed using factory methods and stream operators; queried using STL-like algorithms, function object, etc; or modified using tree or node methods. The tree logically maps to XML, and utilities exist to transform between binary and ASCII XML formats. The binary representation is compact, I/O is simple and efficient, and endian conversions are handled automatically. EVIO will be used by the next generation of experiments at Jefferson Lab.

  16. Risk management of PPP project in the preparation stage based on Fault Tree Analysis

    Science.gov (United States)

    Xing, Yuanzhi; Guan, Qiuling

    2017-03-01

    The risk management of PPP(Public Private Partnership) project can improve the level of risk control between government departments and private investors, so as to make more beneficial decisions, reduce investment losses and achieve mutual benefit as well. Therefore, this paper takes the PPP project preparation stage venture as the research object to identify and confirm four types of risks. At the same time, fault tree analysis(FTA) is used to evaluate the risk factors that belong to different parts, and quantify the influencing degree of risk impact on the basis of risk identification. In addition, it determines the importance order of risk factors by calculating unit structure importance on PPP project preparation stage. The result shows that accuracy of government decision-making, rationality of private investors funds allocation and instability of market returns are the main factors to generate the shared risk on the project.

  17. An application of the fault tree analysis for the power system reliability estimation

    International Nuclear Information System (INIS)

    Volkanovski, A.; Cepin, M.; Mavko, B.

    2007-01-01

    The power system is a complex system with its main function to produce, transfer and provide consumers with electrical energy. Combinations of failures of components in the system can result in a failure of power delivery to certain load points and in some cases in a full blackout of power system. The power system reliability directly affects safe and reliable operation of nuclear power plants because the loss of offsite power is a significant contributor to the core damage frequency in probabilistic safety assessments of nuclear power plants. The method, which is based on the integration of the fault tree analysis with the analysis of the power flows in the power system, was developed and implemented for power system reliability assessment. The main contributors to the power system reliability are identified, both quantitatively and qualitatively. (author)

  18. Towards generating ECSS-compliant fault tree analysis results via ConcertoFLA

    Science.gov (United States)

    Gallina, B.; Haider, Z.; Carlsson, A.

    2018-05-01

    Attitude Control Systems (ACSs) maintain the orientation of the satellite in three-dimensional space. ACSs need to be engineered in compliance with ECSS standards and need to ensure a certain degree of dependability. Thus, dependability analysis is conducted at various levels and by using ECSS-compliant techniques. Fault Tree Analysis (FTA) is one of these techniques. FTA is being automated within various Model Driven Engineering (MDE)-based methodologies. The tool-supported CHESS-methodology is one of them. This methodology incorporates ConcertoFLA, a dependability analysis technique enabling failure behavior analysis and thus FTA-results generation. ConcertoFLA, however, similarly to other techniques, still belongs to the academic research niche. To promote this technique within the space industry, we apply it on an ACS and discuss about its multi-faceted potentialities in the context of ECSS-compliant engineering.

  19. Multi-state system in a fault tree analysis of a nuclear based thermochemical hydrogen plant

    International Nuclear Information System (INIS)

    Zhang, Y.

    2008-01-01

    Nuclear-based hydrogen generation is a promising way to supply hydrogen for this large market in the future. This thesis focuses on one of the most promising methods, a thermochemical Cu-Cl cycle, which is currently under development by UOIT, Atomic Energy of Canada Limited (AECL) and the Argonne National Laboratory (ANL). The safety issues of the Cu-Cl cycle are addressed in this thesis. An investigation of major accident scenarios shows that potential tragedies can be avoided with effective risk analysis and safety management programs. As a powerful and systematic tool, fault tree analysis (FTA) is adapted to the particular needs of the Cu-Cl system. This thesis develops a new method that combines FTA with a reliability analysis tool, multi-state system (MSS), to improve the accuracy of FTA and also improve system reliability. (author)

  20. Failure mode effect analysis and fault tree analysis as a combined methodology in risk management

    Science.gov (United States)

    Wessiani, N. A.; Yoshio, F.

    2018-04-01

    There have been many studies reported the implementation of Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) as a method in risk management. However, most of the studies usually only choose one of these two methods in their risk management methodology. On the other side, combining these two methods will reduce the drawbacks of each methods when implemented separately. This paper aims to combine the methodology of FMEA and FTA in assessing risk. A case study in the metal company will illustrate how this methodology can be implemented. In the case study, this combined methodology will assess the internal risks that occur in the production process. Further, those internal risks should be mitigated based on their level of risks.

  1. Analyses of robot systems using fault and event trees: case studies

    International Nuclear Information System (INIS)

    Khodabandehloo, Koorosh

    1996-01-01

    Safety in the use of robotics outside factories or processing plants has become a matter of great international concern. Domestic robots and those intended to assist nurses and surgeons in hospitals are examples of cases where safety and reliability are considered critical. The safe performance of robot systems depends on many factors, including the integrity of the robot's hardware and software, the way it communicates with sensory and other production equipment, the reliable function of the safety features present and the way the robot interacts with its environment. The use of systematic techniques such as Fault and Event Tree analysis to examine the safety and reliability of a given robotic system is presented. Considerable knowledge is needed before the application of such analysis techniques can be translated into safety specifications or indeed 'fail-safe' design features of robotic systems. The skill and understanding required for the formulation of such specifications is demonstrated here based on a number of case studies

  2. A simple component-connection method for building binary decision diagrams encoding a fault tree

    International Nuclear Information System (INIS)

    Way, Y.-S.; Hsia, D.-Y.

    2000-01-01

    A simple new method for building binary decision diagrams (BDDs) encoding a fault tree (FT) is provided in this study. We first decompose the FT into FT-components. Each of them is a single descendant (SD) gate-sequence. Following the node-connection rule, the BDD-component encoding an SD FT-component can each be found to be an SD node-sequence. By successively connecting the BDD-components one by one, the BDD for the entire FT is thus obtained. During the node-connection and component-connection, reduction rules might need to be applied. An example FT is used throughout the article to explain the procedure step by step. Our method proposed is a hybrid one for FT analysis. Some algorithms or techniques used in the conventional FT analysis or the newer BDD approach may be applied to our case; our ideas mentioned in the article might be referred by the two methods

  3. Analisa Penyebab Keterlambatan Proyek Pembangunan Sidoarjo Town Square Menggunakan Metode Fault Tree Analysis (FTA

    Directory of Open Access Journals (Sweden)

    Ridhati Amalia

    2012-09-01

    Full Text Available Setiap proyek konstruksi pada umumnya  mempunyai rencana pelaksanaan dan jadwal  pelaksanaan tertentu, kapan pelaksanaan proyek  tersebut harus dimulai, kapan proyek tersebut harus diselesaikan,  bagaimana proyek tersebut akan dikerjakan, serta  bagaimana penyediaan sumber dayanya. Diharapkan dalam pelaksanaanya tidak terjadi keterlambatan karena keterlambatan yang terjadi akan mengakibatkan meningkatnya biaya proyek. Namun, dalam pelaksanaan proyek pembangunan Sidoarjo Town Square mengalami keterlambatan. Metode yang direncanakan dalam pembahasan untuk mengetahui faktor yang mempengaruhi terjadinya keterlambatan yaitu Metode Fault Tree  Analysis (FTA dan Method Obtain Cut Set (MOCUS. Didapatkan bahwa item pekerjaan yang mengalami keterlambatan yaitu: pekerjaan struktur GWT STP, pekerjaan finishing fasade dan canopy, dan pekerjaan atap. Dari hasil analisa FTA dari ketiga top event, didapatkan bahwa keterlambatan terjadi dikarenakan  perubahan desain serta perijinan, dimana keduanya akibat faktor penyebab keterlambatan dari pihak owner.

  4. Risk assessment for enterprise resource planning (ERP) system implementations: a fault tree analysis approach

    Science.gov (United States)

    Zeng, Yajun; Skibniewski, Miroslaw J.

    2013-08-01

    Enterprise resource planning (ERP) system implementations are often characterised with large capital outlay, long implementation duration, and high risk of failure. In order to avoid ERP implementation failure and realise the benefits of the system, sound risk management is the key. This paper proposes a probabilistic risk assessment approach for ERP system implementation projects based on fault tree analysis, which models the relationship between ERP system components and specific risk factors. Unlike traditional risk management approaches that have been mostly focused on meeting project budget and schedule objectives, the proposed approach intends to address the risks that may cause ERP system usage failure. The approach can be used to identify the root causes of ERP system implementation usage failure and quantify the impact of critical component failures or critical risk events in the implementation process.

  5. Fault tree analysis: A survey of the state-of-the-art in modeling, analysis and tools

    NARCIS (Netherlands)

    Ruijters, Enno Jozef Johannes; Stoelinga, Mariëlle Ida Antoinette

    2015-01-01

    Fault tree analysis (FTA) is a very prominent method to analyze the risks related to safety and economically critical assets, like power plants, airplanes, data centers and web shops. FTA methods comprise of a wide variety of modelling and analysis techniques, supported by a wide range of software

  6. Fault Tree Analysis: A survey of the state-of-the-art in modeling, analysis and tools

    NARCIS (Netherlands)

    Ruijters, Enno Jozef Johannes; Stoelinga, Mariëlle Ida Antoinette

    2014-01-01

    Fault tree analysis (FTA) is a very prominent method to analyze the risks related to safety and economically critical assets, like power plants, airplanes, data centers and web shops. FTA methods comprise of a wide variety of modelling and analysis techniques, supported by a wide range of software

  7. FAULT TREE ANALYSIS FOR EXPOSURE TO REFRIGERANTS USED FOR AUTOMOTIVE AIR CONDITIONING IN THE U.S.

    Science.gov (United States)

    A fault tree analysis was used to estimate the number of refrigerant exposures of automotive service technicians and vehicle occupants in the United States. Exposures of service technicians can occur when service equipment or automotive air-conditioning systems leak during servic...

  8. Fault Tree Analysis for Safety/Security Verification in Aviation Software

    Directory of Open Access Journals (Sweden)

    Andrew J. Kornecki

    2013-01-01

    Full Text Available The Next Generation Air Traffic Management system (NextGen is a blueprint of the future National Airspace System. Supporting NextGen is a nation-wide Aviation Simulation Network (ASN, which allows integration of a variety of real-time simulations to facilitate development and validation of the NextGen software by simulating a wide range of operational scenarios. The ASN system is an environment, including both simulated and human-in-the-loop real-life components (pilots and air traffic controllers. Real Time Distributed Simulation (RTDS developed at Embry Riddle Aeronautical University, a suite of applications providing low and medium fidelity en-route simulation capabilities, is one of the simulations contributing to the ASN. To support the interconnectivity with the ASN, we designed and implemented a dedicated gateway acting as an intermediary, providing logic for two-way communication and transfer messages between RTDS and ASN and storage for the exchanged data. It has been necessary to develop and analyze safety/security requirements for the gateway software based on analysis of system assets, hazards, threats and attacks related to ultimate real-life future implementation. Due to the nature of the system, the focus was placed on communication security and the related safety of the impacted aircraft in the simulation scenario. To support development of safety/security requirements, a well-established fault tree analysis technique was used. This fault tree model-based analysis, supported by a commercial tool, was a foundation to propose mitigations assuring the gateway system safety and security. 

  9. An Overview of Risk Quantification Issues for Digitalized Nuclear Power Plants using a Static Fault Tree

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hyun Gook; Kim, Man Cheol; Lee, Seung Jun; Lee, Ho Jung; Eom, Heung Seop; Chol, Jong Gyun; Jang, Seung Cheol [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-08-15

    Risk caused by safety-critical instrumentation and control (I and C) systems considerably affects overall plant risk. As digitalization of safety-critical systems in nuclear power plants progresses, a risk model of a digitalized safety system is required and must be included in a plant safety model in order to assess this risk effect on the plant. Unique features of a digital system cause some challenges in risk modeling. This article aims at providing an overview of the issues related to the development of a static fault-tree-based risk model. We categorize the complicated issues of digital system probabilistic risk assessment (PRA) into four groups based on their characteristics: hardware module issues, software issues, system issues, and safety function issues. Quantification of the effect of these issues dominates the quality of a developed risk model. Recent research activities for addressing various issues, such as the modeling framework of a software-based system, the software failure probability and the fault coverage of a self monitoring mechanism, are discussed. Although these issues are interrelated and affect each other, the categorized and systematic approach suggested here will provide a proper insight for analyzing risk from a digital system

  10. Object-Oriented Approach to Modeling Units of Pneumatic Systems

    Directory of Open Access Journals (Sweden)

    Yu. V. Kyurdzhiev

    2014-01-01

    Full Text Available The article shows the relevance of the approaches to the object-oriented programming when modeling the pneumatic units (PU.Based on the analysis of the calculation schemes of aggregates pneumatic systems two basic objects, namely a cavity flow and a material point were highlighted.Basic interactions of objects are defined. Cavity-cavity interaction: ex-change of matter and energy with the flows of mass. Cavity-point interaction: force interaction, exchange of energy in the form of operation. Point-point in-teraction: force interaction, elastic interaction, inelastic interaction, and inter-vals of displacement.The authors have developed mathematical models of basic objects and interactions. Models and interaction of elements are implemented in the object-oriented programming.Mathematical models of elements of PU design scheme are implemented in derived from the base class. These classes implement the models of flow cavity, piston, diaphragm, short channel, diaphragm to be open by a given law, spring, bellows, elastic collision, inelastic collision, friction, PU stages with a limited movement, etc.A numerical integration of differential equations for the mathematical models of PU design scheme elements is based on the Runge-Kutta method of the fourth order. On request each class performs a tact of integration i.e. calcu-lation of the coefficient method.The paper presents an integration algorithm of the system of differential equations. All objects of the PU design scheme are placed in a unidirectional class list. Iterator loop cycle initiates the integration tact of all the objects in the list. One in four iteration makes a transition to the next step of integration. Calculation process stops when any object shows a shutdowns flag.The proposed approach was tested in the calculation of a number of PU designs. With regard to traditional approaches to modeling, the authors-proposed method features in easy enhancement, code reuse, high reliability

  11. What object-oriented programming may be - and what it does not have to be

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann; Møller-Pedersen, Birger

    1988-01-01

    A conceptual framework for object-oriented programming is presented. The framework is independent of specific programming language constructs. It is illustrated how this framework is reflected in an object-oriented language and the language mechanisms are compared with the corresponding elements...... of other object-oriented languages. Main issues of object-oriented programming are considered on the basis of the framework presented here....

  12. α-Cut method based importance measure for criticality analysis in fuzzy probability – Based fault tree analysis

    International Nuclear Information System (INIS)

    Purba, Julwan Hendry; Sony Tjahyani, D.T.; Widodo, Surip; Tjahjono, Hendro

    2017-01-01

    Highlights: •FPFTA deals with epistemic uncertainty using fuzzy probability. •Criticality analysis is important for reliability improvement. •An α-cut method based importance measure is proposed for criticality analysis in FPFTA. •The α-cut method based importance measure utilises α-cut multiplication, α-cut subtraction, and area defuzzification technique. •Benchmarking confirm that the proposed method is feasible for criticality analysis in FPFTA. -- Abstract: Fuzzy probability – based fault tree analysis (FPFTA) has been recently developed and proposed to deal with the limitations of conventional fault tree analysis. In FPFTA, reliabilities of basic events, intermediate events and top event are characterized by fuzzy probabilities. Furthermore, the quantification of the FPFTA is based on fuzzy multiplication rule and fuzzy complementation rule to propagate uncertainties from basic event to the top event. Since the objective of the fault tree analysis is to improve the reliability of the system being evaluated, it is necessary to find the weakest path in the system. For this purpose, criticality analysis can be implemented. Various importance measures, which are based on conventional probabilities, have been developed and proposed for criticality analysis in fault tree analysis. However, not one of those importance measures can be applied for criticality analysis in FPFTA, which is based on fuzzy probability. To be fully applied in nuclear power plant probabilistic safety assessment, FPFTA needs to have its corresponding importance measure. The objective of this study is to develop an α-cut method based importance measure to evaluate and rank the importance of basic events for criticality analysis in FPFTA. To demonstrate the applicability of the proposed measure, a case study is performed and its results are then benchmarked to the results generated by the four well known importance measures in conventional fault tree analysis. The results

  13. Probabilistic Risk Assessment of Hydraulic Fracturing in Unconventional Reservoirs by Means of Fault Tree Analysis: An Initial Discussion

    Science.gov (United States)

    Rodak, C. M.; McHugh, R.; Wei, X.

    2016-12-01

    The development and combination of horizontal drilling and hydraulic fracturing has unlocked unconventional hydrocarbon reserves around the globe. These advances have triggered a number of concerns regarding aquifer contamination and over-exploitation, leading to scientific studies investigating potential risks posed by directional hydraulic fracturing activities. These studies, balanced with potential economic benefits of energy production, are a crucial source of information for communities considering the development of unconventional reservoirs. However, probabilistic quantification of the overall risk posed by hydraulic fracturing at the system level are rare. Here we present the concept of fault tree analysis to determine the overall probability of groundwater contamination or over-exploitation, broadly referred to as the probability of failure. The potential utility of fault tree analysis for the quantification and communication of risks is approached with a general application. However, the fault tree design is robust and can handle various combinations of regional-specific data pertaining to relevant spatial scales, geological conditions, and industry practices where available. All available data are grouped into quantity and quality-based impacts and sub-divided based on the stage of the hydraulic fracturing process in which the data is relevant as described by the USEPA. Each stage is broken down into the unique basic events required for failure; for example, to quantify the risk of an on-site spill we must consider the likelihood, magnitude, composition, and subsurface transport of the spill. The structure of the fault tree described above can be used to render a highly complex system of variables into a straightforward equation for risk calculation based on Boolean logic. This project shows the utility of fault tree analysis for the visual communication of the potential risks of hydraulic fracturing activities on groundwater resources.

  14. Standardization of transportation classes for object-oriented deployment simulations.

    Energy Technology Data Exchange (ETDEWEB)

    Burke, J. F., Jr.; Howard, D. L.; Jackson, J.; Macal, C. M.; Nevins, M. R.; Van Groningen, C. N.

    1999-07-30

    Many recent efforts to integrate transportation and deployment simulations, although beneficial, have lacked a feature vital for seamless integration: a common data class representation. It is an objective of the Department of Defense (DoD) to standardize all classes used in object-oriented deployment simulations by developing a standard class attribute representation and behavior for all deployment simulations that rely on an underlying class representation. The Extensive Hierarchy and Object Representation for Transportation Simulations (EXHORT) is a collection of three hierarchies that together will constitute a standard and consistent class attribute representation and behavior that could be used directly by a large set of deployment simulations. The first hierarchy is the Transportation Class Hierarchy (TCH), which describes a significant portion of the defense transportation system; the other two deal with infrastructure and resource classes. EXHORT will allow deployment simulations to use the same set of underlying class data, ensure transparent exchanges, reduce the effort needed to integrate simulations, and permit a detailed analysis of the defense transportation system. This paper describes EXHORT's first hierarchy, the TCH, and provides a rationale for why it is a helpful tool for modeling major portions of the defense transportation system.

  15. VLTI auxiliary telescopes: a full object-oriented approach

    Science.gov (United States)

    Chiozzi, Gianluca; Duhoux, Philippe; Karban, Robert

    2000-06-01

    The Very Large Telescope (VLT) Telescope Control Software (TCS) is a portable system. It is now in use or will be used in a whole family of ESO telescopes VLT Unit Telescopes, VLTI Auxiliary Telescopes, NTT, La Silla 3.6, VLT Survey Telescope and Astronomical Site Monitors in Paranal and La Silla). Although it has been developed making extensive usage of Object Oriented (OO) methodologies, the overall development process chosen at the beginning of the project used traditional methods. In order to warranty a longer lifetime to the system (improving documentation and maintainability) and to prepare for future projects, we have introduced a full OO process. We have taken as a basis the United Software Development Process with the Unified Modeling Language (UML) and we have adapted the process to our specific needs. This paper describes how the process has been applied to the VLTI Auxiliary Telescopes Control Software (ATCS). The ATCS is based on the portable VLT TCS, but some subsystems are new or have specific characteristics. The complete process has been applied to the new subsystems, while reused code has been integrated in the UML models. We have used the ATCS on one side to tune the process and train the team members and on the other side to provide a UML and WWW based documentation for the portable VLT TCS.

  16. Object oriented programming techniques applied to device access and control

    International Nuclear Information System (INIS)

    Goetz, A.; Klotz, W.D.; Meyer, J.

    1992-01-01

    In this paper a model, called the device server model, has been presented for solving the problem of device access and control faced by all control systems. Object Oriented Programming techniques were used to achieve a powerful yet flexible solution. The model provides a solution to the problem which hides device dependancies. It defines a software framework which has to be respected by implementors of device classes - this is very useful for developing groupware. The decision to implement remote access in the root class means that device servers can be easily integrated in a distributed control system. A lot of the advantages and features of the device server model are due to the adoption of OOP techniques. The main conclusion that can be drawn from this paper is that 1. the device access and control problem is adapted to being solved with OOP techniques, 2. OOP techniques offer a distinct advantage over traditional programming techniques for solving the device access problem. (J.P.N.)

  17. Recent developments and object-oriented approach in FTU database

    International Nuclear Information System (INIS)

    Bertocchi, A.; Bracco, G.; Buceti, G.; Centioli, C.; Iannone, F.; Manduchi, G.; Nanni, U.; Panella, M.; Stracuzzi, C.; Vitale, V.

    2001-01-01

    During the last two years, the experimental database of Frascati Tokamak Upgrade (FTU) has been changed from several points of view, particularly: (i) the data and the analysis codes have been moved from the IBM main frame to Unix platforms making enabling the users to take advantage of the large quantities of commercial and free software available under Unix (Matlab, IDL, etc); (ii) AFS (Andrew File System) has been chosen as the distributed file system making the data available on all the nodes and distributing the workload; (iii) 'One measure/one file' philosophy (vs. the previous 'one pulse/one file') has been adopted increasing the number of files into the database but, at the same time, allowing the most important data to be available just after the plasma discharge. The client-server architecture has been tested using the signal viewer client jScope. Moreover, an object oriented data model (OODM) of FTU experimental data has been tried: a generalized model in tokamak experimental data has been developed with typical concepts such as abstraction, encapsulation, inheritance, and polymorphism. The model has been integrated with data coming from different databases, building an Object Warehouse to extract, with data mining techniques, meaningful trends and patterns from huge amounts of data

  18. Object-oriented versus logical conventional implementation of a MMIIS

    Science.gov (United States)

    Forte, Anne-Marie; Bernadet, Maurice; Lavaire, Franck; Bizais, Yves J.

    1992-06-01

    The main components of a multimodality medical image interpretation system (MMIIS) are: (1) a user interface, (2) an image database, storing image objects along with their description, (3) expert systems (ES) in various medical imaging domains and particularly in image processing (IP), and (4) an IP actor, toolbox of standard IP procedures. To implement such a system, we are building two prototypes: one with an object-oriented (OO) expert system and one with a classical logical expert system. In these two different approaches, we have to model the medical imaging objects and represent them. Both approaches use an OO data model even if its implementation is different in: (1) the characteristics of each ES, in managing knowledge and inferences (uncertainty, non-monotonicity, backward and forward chaining, meta- knowledge), (2) the environment to implement the different experts and to activate IP procedures, and (3) the communication means between the experts and the other components. In the OO approach, an ES based on smalltalk is used, and in the conventional one an adhoc Prolog ES was built. Our goal is to compare their advantages and disadvantages in implementing a MMIIS.

  19. RF control at SSCL - an object oriented design approach

    International Nuclear Information System (INIS)

    Dohan, D.A.; Osberg, E.; Biggs, R.; Bossom, J.; Chillara, K.; Richter, R.; Wade, D.

    1994-01-01

    The Superconducting Super Collider (SSC) in Texas, the construction of which was stopped in 1994, would have represented a major challenge in accelerator research and development. This paper addresses the issues encountered in the parallel design and construction of the control systems for the RF equipment for the five accelerators comprising the SSC. An extensive analysis of the components of the RF control systems has been undertaken, based upon the Schlaer-Mellor object-oriented analysis and design (OOA/OOD) methodology. The RF subsystem components such as amplifiers, tubes, power supplies, PID loops, etc. were analyzed to produce OOA information, behavior and process models. Using these models, OOD was iteratively applied to develop a generic RF control system design. This paper describes the results of this analysis and the development of 'bridges' between the analysis objects, and the EPICS-based software and underlying VME-based hardware architectures. The application of this approach to several of the SSCL RF control systems is discussed. ((orig.))

  20. VIMOS Instrument Control Software Design: an Object Oriented Approach

    Science.gov (United States)

    Brau-Nogué, Sylvie; Lucuix, Christian

    2002-12-01

    The Franco-Italian VIMOS instrument is a VIsible imaging Multi-Object Spectrograph with outstanding multiplex capabilities, allowing to take spectra of more than 800 objects simultaneously, or integral field spectroscopy mode in a 54x54 arcsec area. VIMOS is being installed at the Nasmyth focus of the third Unit Telescope of the European Southern Observatory Very Large Telescope (VLT) at Mount Paranal in Chile. This paper will describe the analysis, the design and the implementation of the VIMOS Instrument Control System, using UML notation. Our Control group followed an Object Oriented software process while keeping in mind the ESO VLT standard control concepts. At ESO VLT a complete software library is available. Rather than applying waterfall lifecycle, ICS project used iterative development, a lifecycle consisting of several iterations. Each iteration consisted in : capture and evaluate the requirements, visual modeling for analysis and design, implementation, test, and deployment. Depending of the project phases, iterations focused more or less on specific activity. The result is an object model (the design model), including use-case realizations. An implementation view and a deployment view complement this product. An extract of VIMOS ICS UML model will be presented and some implementation, integration and test issues will be discussed.

  1. Field Model: An Object-Oriented Data Model for Fields

    Science.gov (United States)

    Moran, Patrick J.

    2001-01-01

    We present an extensible, object-oriented data model designed for field data entitled Field Model (FM). FM objects can represent a wide variety of fields, including fields of arbitrary dimension and node type. FM can also handle time-series data. FM achieves generality through carefully selected topological primitives and through an implementation that leverages the potential of templated C++. FM supports fields where the nodes values are paired with any cell type. Thus FM can represent data where the field nodes are paired with the vertices ("vertex-centered" data), fields where the nodes are paired with the D-dimensional cells in R(sup D) (often called "cell-centered" data), as well as fields where nodes are paired with edges or other cell types. FM is designed to effectively handle very large data sets; in particular FM employs a demand-driven evaluation strategy that works especially well with large field data. Finally, the interfaces developed for FM have the potential to effectively abstract field data based on adaptive meshes. We present initial results with a triangular adaptive grid in R(sup 2) and discuss how the same design abstractions would work equally well with other adaptive-grid variations, including meshes in R(sup 3).

  2. Object-oriented approach for gas turbine engine simulation

    Science.gov (United States)

    Curlett, Brian P.; Felder, James L.

    1995-01-01

    An object-oriented gas turbine engine simulation program was developed. This program is a prototype for a more complete, commercial grade engine performance program now being proposed as part of the Numerical Propulsion System Simulator (NPSS). This report discusses architectural issues of this complex software system and the lessons learned from developing the prototype code. The prototype code is a fully functional, general purpose engine simulation program, however, only the component models necessary to model a transient compressor test rig have been written. The production system will be capable of steady state and transient modeling of almost any turbine engine configuration. Chief among the architectural considerations for this code was the framework in which the various software modules will interact. These modules include the equation solver, simulation code, data model, event handler, and user interface. Also documented in this report is the component based design of the simulation module and the inter-component communication paradigm. Object class hierarchies for some of the code modules are given.

  3. A Validation of Object-Oriented Design Metrics as Quality Indicators

    Science.gov (United States)

    Basili, Victor R.; Briand, Lionel C.; Melo, Walcelio

    1997-01-01

    This paper presents the results of a study in which we empirically investigated the suits of object-oriented (00) design metrics introduced in another work. More specifically, our goal is to assess these metrics as predictors of fault-prone classes and, therefore, determine whether they can be used as early quality indicators. This study is complementary to the work described where the same suite of metrics had been used to assess frequencies of maintenance changes to classes. To perform our validation accurately, we collected data on the development of eight medium-sized information management systems based on identical requirements. All eight projects were developed using a sequential life cycle model, a well-known 00 analysis/design method and the C++ programming language. Based on empirical and quantitative analysis, the advantages and drawbacks of these 00 metrics are discussed. Several of Chidamber and Kamerer's 00 metrics appear to be useful to predict class fault-proneness during the early phases of the life-cycle. Also, on our data set, they are better predictors than 'traditional' code metrics, which can only be collected at a later phase of the software development processes.

  4. A Conceptual Approach to Teaching Object-Orientation to C Programmers

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann; Torgersen, Mads; Røn, Henrik

    1998-01-01

    This paper describes experiences from a three-day course held as part of a collaborative research project, in which object-oriented programming was taught to a group of engineers who were all proficient C programmers. Our approach to teaching object-oriented programming focuses on conceptual...... modeling, emphasizing that object-orientation is not a bag of solutions and technology; rather, object-orientation is a means to understand, describe (model) and communicate. The paper describes a general approach to teaching object-oriented programming to C-programmers and reports on the experience from...

  5. The first object oriented monitor for intravenous anesthesia.

    Science.gov (United States)

    Cantraine, F R; Coussaert, E J

    2000-01-01

    To describe the design and implementation of "INFUSION TOOLBOX," a software tool to control and monitor multiple intravenous drug infusions simultaneously using pharmacokinetic and pharmacodynamic principles. INFUSION TOOLBOX has been designed to present a graphical interface. Object Oriented design was used and the software was implemented using Smalltalk, to run on a PC. Basic tools are available to manage patient, drugs, pumps and reports. These tools are the PatientPanel, the DrugPanel, the PumpPanel and the HistoryPanel. The screen is built dynamically. The panels may be collapsed or closed to avoid a crowded display. We also built control panels such as the Target ControlPanel which calculates the best infusion sequence to bring the drug concentration in the plasma compartment to a preset value. Before drug delivery, the user enters the patient's data, selects a drug, enters its dilution factor and chooses a pharmacokinetic model. The calculated plasma concentration is continually displayed and updated. The anesthetist may ask for the history of the delivery to obtain a graphic report or to add events to the logbook. A panel targeting the effect is used when a pharmacodynamic model is known. Data files for drugs, pumps and surgery are upgradable. By creating a resizeable ControlPanel we enable the anesthetist to display the information he wishes, when he wishes it. The available panels are diverse enough to meet the anesthetist needs; they may be adapted to the drug used, pumps used and surgery. It is the anesthetist who builds dynamically its different control screens. By adopting an evolutionary solution model we have achieved considerable success in building our drug delivery monitor. In addition we have gained valuable insight into the anesthesia information domain that will allow us to further enhance and expand the system.

  6. Object-oriented process dose modeling for glovebox operations

    International Nuclear Information System (INIS)

    Boerigter, S.T.; Fasel, J.H.; Kornreich, D.E.

    1999-01-01

    The Plutonium Facility at Los Alamos National Laboratory supports several defense and nondefense-related missions for the country by performing fabrication, surveillance, and research and development for materials and components that contain plutonium. Most operations occur in rooms with one or more arrays of gloveboxes connected to each other via trolley gloveboxes. Minimizing the effective dose equivalent (EDE) is a growing concern as a result of steadily declining allowable dose limits being imposed and a growing general awareness of safety in the workplace. In general, the authors discriminate three components of a worker's total EDE: the primary EDE, the secondary EDE, and background EDE. A particular background source of interest is the nuclear materials vault. The distinction between sources inside and outside of a particular room is arbitrary with the underlying assumption that building walls and floors provide significant shielding to justify including sources in other rooms in the background category. Los Alamos has developed the Process Modeling System (ProMoS) primarily for performing process analyses of nuclear operations. ProMoS is an object-oriented, discrete-event simulation package that has been used to analyze operations at Los Alamos and proposed facilities such as the new fabrication facilities for the Complex-21 effort. In the past, crude estimates of the process dose (the EDE received when a particular process occurred), room dose (the EDE received when a particular process occurred in a given room), and facility dose (the EDE received when a particular process occurred in the facility) were used to obtain an integrated EDE for a given process. Modifications to the ProMoS package were made to utilize secondary dose information to use dose modeling to enhance the process modeling efforts

  7. COOMA: AN OBJECT-ORIENTED STOCHASTIC OPTIMIZATION ALGORITHM

    Directory of Open Access Journals (Sweden)

    Stanislav Alexandrovich Tavridovich

    2017-09-01

    Full Text Available Stochastic optimization methods such as genetic algorithm, particle swarm optimization algorithm, and others are successfully used to solve optimization problems. They are all based on similar ideas and need minimal adaptation when being implemented. But several factors complicate the application of stochastic search methods in practice: multimodality of the objective function, optimization with constraints, finding the best parameter configuration of the algorithm, the increasing of the searching space, etc. This paper proposes a new Cascade Object Optimization and Modification Algorithm (COOMA which develops the best ideas of known stochastic optimization methods and can be applied to a wide variety of real-world problems described in the terms of object-oriented models with practically any types of parameters, variables, and associations between objects. The objects of different classes are organized in pools and pools form the hierarchical structure according to the associations between classes. The algorithm is also executed according to the pool structure: the methods of the upper-level pools before changing their objects call the analogous methods of all their subpools. The algorithm starts with initialization step and then passes through a number of iterations during which the objects are modified until the stop criteria are satisfied. The objects are modified using movement, replication and mutation operations. Two-level version of COOMA realizes a built-in self-adaptive mechanism. The optimization statistics for a number of test problems shows that COOMA is able to solve multi-level problems (with objects of different associated classes, problems with multimodal fitness functions and systems of constraints. COOMA source code on Java is available on request.

  8. Handling Emergency Management in [an] Object Oriented Modeling Environment

    Science.gov (United States)

    Tokgoz, Berna Eren; Cakir, Volkan; Gheorghe, Adrian V.

    2010-01-01

    It has been understood that protection of a nation from extreme disasters is a challenging task. Impacts of extreme disasters on a nation's critical infrastructures, economy and society could be devastating. A protection plan itself would not be sufficient when a disaster strikes. Hence, there is a need for a holistic approach to establish more resilient infrastructures to withstand extreme disasters. A resilient infrastructure can be defined as a system or facility that is able to withstand damage, but if affected, can be readily and cost-effectively restored. The key issue to establish resilient infrastructures is to incorporate existing protection plans with comprehensive preparedness actions to respond, recover and restore as quickly as possible, and to minimize extreme disaster impacts. Although national organizations will respond to a disaster, extreme disasters need to be handled mostly by local emergency management departments. Since emergency management departments have to deal with complex systems, they have to have a manageable plan and efficient organizational structures to coordinate all these systems. A strong organizational structure is the key in responding fast before and during disasters, and recovering quickly after disasters. In this study, the entire emergency management is viewed as an enterprise and modelled through enterprise management approach. Managing an enterprise or a large complex system is a very challenging task. It is critical for an enterprise to respond to challenges in a timely manner with quick decision making. This study addresses the problem of handling emergency management at regional level in an object oriented modelling environment developed by use of TopEase software. Emergency Operation Plan of the City of Hampton, Virginia, has been incorporated into TopEase for analysis. The methodology used in this study has been supported by a case study on critical infrastructure resiliency in Hampton Roads.

  9. Object-oriented classification of drumlins from digital elevation models

    Science.gov (United States)

    Saha, Kakoli

    Drumlins are common elements of glaciated landscapes which are easily identified by their distinct morphometric characteristics including shape, length/width ratio, elongation ratio, and uniform direction. To date, most researchers have mapped drumlins by tracing contours on maps, or through on-screen digitization directly on top of hillshaded digital elevation models (DEMs). This paper seeks to utilize the unique morphometric characteristics of drumlins and investigates automated extraction of the landforms as objects from DEMs by Definiens Developer software (V.7), using the 30 m United States Geological Survey National Elevation Dataset DEM as input. The Chautauqua drumlin field in Pennsylvania and upstate New York, USA was chosen as a study area. As the study area is huge (approximately covers 2500 sq.km. of area), small test areas were selected for initial testing of the method. Individual polygons representing the drumlins were extracted from the elevation data set by automated recognition, using Definiens' Multiresolution Segmentation tool, followed by rule-based classification. Subsequently parameters such as length, width and length-width ratio, perimeter and area were measured automatically. To test the accuracy of the method, a second base map was produced by manual on-screen digitization of drumlins from topographic maps and the same morphometric parameters were extracted from the mapped landforms using Definiens Developer. Statistical comparison showed a high agreement between the two methods confirming that object-oriented classification for extraction of drumlins can be used for mapping these landforms. The proposed method represents an attempt to solve the problem by providing a generalized rule-set for mass extraction of drumlins. To check that the automated extraction process was next applied to a larger area. Results showed that the proposed method is as successful for the bigger area as it was for the smaller test areas.

  10. An investigation of the relations between fault tree analysis and cause consequence analysis with special reference to a photometry and conductimetry system

    International Nuclear Information System (INIS)

    Weber, G.

    1980-02-01

    For an automated photometry and conductimetry system, the relations between cause consequence analysis and fault tree analysis have been investigated. It has been shown how failure combinations of a cause consequence diagram and minimal cuts of a fault tree can be identified. This procedure allows a mutual control of fault tree analysis and cause consequence analysis. From a representation of all failure combinations of the system by means of a matrix we obtain a control of our analysis. Moreover, heuristic rules improving and simplifying the cause consequence analysis can be found. Necessary assumptions for the validity of these rules are discussed. Methodologically, the relation of a fault tree and a cause consequence diagram can be represented (under certain conditions) as a relation of a Boolean function and a binary decision tree. (orig.) 891 HP/orig. 892 MKO [de

  11. IMPORTANCE, Minimal Cut Sets and System Availability from Fault Tree Analysis

    International Nuclear Information System (INIS)

    Lambert, H. W.

    1987-01-01

    1 - Description of problem or function: IMPORTANCE computes various measures of probabilistic importance of basic events and minimal cut sets to a fault tree or reliability network diagram. The minimal cut sets, the failure rates and the fault duration times (i.e., the repair times) of all basic events contained in the minimal cut sets are supplied as input data. The failure and repair distributions are assumed to be exponential. IMPORTANCE, a quantitative evaluation code, then determines the probability of the top event and computes the importance of minimal cut sets and basic events by a numerical ranking. Two measures are computed. The first describes system behavior at one point in time; the second describes sequences of failures that cause the system to fail in time. All measures are computed assuming statistical independence of basic events. In addition, system unavailability and expected number of system failures are computed by the code. 2 - Method of solution: Seven measures of basic event importance and two measures of cut set importance can be computed. Birnbaum's measure of importance (i.e., the partial derivative) and the probability of the top event are computed using the min cut upper bound. If there are no replicated events in the minimal cut sets, then the min cut upper bound is exact. If basic events are replicated in the minimal cut sets, then based on experience the min cut upper bound is accurate if the probability of the top event is less than 0.1. Simpson's rule is used in computing the time-integrated measures of importance. Newton's method for approximating the roots of an equation is employed in the options where the importance measures are computed as a function of the probability of the top event, and a shell sort puts the output in descending order of importance

  12. ALICES: an advanced object-oriented software workshop for simulators

    International Nuclear Information System (INIS)

    Sayet, R.L.; Rouault, G.; Pieroux, D.; Houte, U. Van

    1999-01-01

    Reducing simulator development costs while improving model quality, user-friendliness and teaching capabilities, is a major target for many years in the simulation industry. It has led to the development of specific software tools which have been improved progressively following the new features and capabilities offered by the software industry. Unlike most of these software tools, ALICES (which is a French acronym for 'Interactive Software Workshop for the Design of Simulators') is not an upgrade of a previous generation of tools, like putting a graphical front-end to a classical code generator, but a really new development. Its design specification is based on previous experience with different tools as well as on new capabilities of software technology, mainly in Object Oriented Design. This allowed us to make a real technological 'jump' in the simulation industry, beyond the constraints of some traditional approaches. The main objectives behind the development of ALICES were the following: (1) Minimizing the simulator development time and costs: a simulator development consists mainly in developing software. One way to reduce costs is to facilitate reuse of existing software by developing standard components, and by defining interface standards, (2) Insuring that the produced simulator can be maintained and updated at a minimal cost: a simulator must evolve along with the simulated process, and it is then necessary to update periodically the simulator. The cost of an adequate maintenance is highly dependent of the quality of the software workshop, (3) Covering the whole simulator development process: from the data package to the acceptance tests and for maintenance and upgrade activities; with the whole development team, even if it is dispatched at different working sites; respecting the Quality Assurance rules and procedures (CORYS T.E.S.S. and TRACTEBEL are ISO-9001 certified). The development of ALICES was also done to comply with the following two main

  13. Systems analysis programs for hands-on integrated reliability evaluations (SAPHIRE) Version 5.0. Fault tree, event tree, and piping ampersand instrumentation diagram (FEP) editors reference manual: Volume 7

    International Nuclear Information System (INIS)

    McKay, M.K.; Skinner, N.L.; Wood, S.T.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. The Fault Tree, Event Tree, and Piping and Instrumentation Diagram (FEP) editors allow the user to graphically build and edit fault trees, and event trees, and piping and instrumentation diagrams (P and IDs). The software is designed to enable the independent use of the graphical-based editors found in the Integrated Reliability and Risk Assessment System (IRRAS). FEP is comprised of three separate editors (Fault Tree, Event Tree, and Piping and Instrumentation Diagram) and a utility module. This reference manual provides a screen-by-screen guide of the entire FEP System

  14. Comparison of methods for uncertainty analysis of nuclear-power-plant safety-system fault-tree models

    International Nuclear Information System (INIS)

    Martz, H.F.; Beckman, R.J.; Campbell, K.; Whiteman, D.E.; Booker, J.M.

    1983-04-01

    A comparative evaluation is made of several methods for propagating uncertainties in actual coupled nuclear power plant safety system faults tree models. The methods considered are Monte Carlo simulation, the method of moments, a discrete distribution method, and a bootstrap method. The Monte Carlo method is found to be superior. The sensitivity of the system unavailability distribution to the choice of basic event unavailability distribution is also investigated. The system distribution is also investigated. The system distribution is especially sensitive to the choice of symmetric versus asymmetric basic event distributions. A quick-and dirty method for estimating percentiles of the system unavailability distribution is developed. The method identifies the appropriate basic event distribution percentiles that should be used in evaluating the Boolean system equivalent expression for a given fault tree model to arrive directly at the 5th, 10th, 50th, 90th, and 95th percentiles of the system unavailability distribution

  15. A fuzzy decision tree method for fault classification in the steam generator of a pressurized water reactor

    International Nuclear Information System (INIS)

    Zio, Enrico; Baraldi, Piero; Popescu, Irina Crenguta

    2009-01-01

    This paper extends a method previously introduced by the authors for building a transparent fault classification algorithm by combining the fuzzy clustering, fuzzy logic and decision trees techniques. The baseline method transforms an opaque, fuzzy clustering-based classification model into a fuzzy logic inference model based on linguistic rules which can be represented by a decision tree formalism. The classification model thereby obtained is transparent in that it allows direct interpretation and inspection of the model. An extension in the procedure for the development of the fuzzy logic inference model is introduced to allow the treatment of more complicated cases, e.g. splitted and overlapping clusters. The corresponding computational tool developed relies on a number of parameters which can be tuned by the user to optimally compromise the level of transparency of the classification process and its efficiency. A numerical application is presented with regards to the fault classification in the Steam Generator of a Pressurized Water Reactor.

  16. Quantitative analysis of dynamic fault trees using improved Sequential Binary Decision Diagrams

    International Nuclear Information System (INIS)

    Ge, Daochuan; Lin, Meng; Yang, Yanhua; Zhang, Ruoxing; Chou, Qiang

    2015-01-01

    Dynamic fault trees (DFTs) are powerful in modeling systems with sequence- and function dependent failure behaviors. The key point lies in how to quantify complex DFTs analytically and efficiently. Unfortunately, the existing methods for analyzing DFTs all have their own disadvantages. They either suffer from the problem of combinatorial explosion or need a long computation time to obtain an accurate solution. Sequential Binary Decision Diagrams (SBDDs) are regarded as novel and efficient approaches to deal with DFTs, but their two apparent shortcomings remain to be handled: That is, SBDDs probably generate invalid nodes when given an unpleasant variable index and the scale of the resultant cut sequences greatly relies on the chosen variable index. An improved SBDD method is proposed in this paper to deal with the two mentioned problems. It uses an improved ite (If-Then-Else) algorithm to avoid generating invalid nodes when building SBDDs, and a heuristic variable index to keep the scale of resultant cut sequences as small as possible. To confirm the applicability and merits of the proposed method, several benchmark examples are demonstrated, and the results indicate this approach is efficient as well as reasonable. - Highlights: • New ITE method. • Linear complexity-based finding algorithm. • Heuristic variable index

  17. Analyzing dynamic fault trees derived from model-based system architectures

    International Nuclear Information System (INIS)

    Dehlinger, Josh; Dugan, Joanne Bechta

    2008-01-01

    Dependability-critical systems, such as digital instrumentation and control systems in nuclear power plants, necessitate engineering techniques and tools to provide assurances of their safety and reliability. Determining system reliability at the architectural design phase is important since it may guide design decisions and provide crucial information for trade-off analysis and estimating system cost. Despite this, reliability and system engineering remain separate disciplines and engineering processes by which the dependability analysis results may not represent the designed system. In this article we provide an overview and application of our approach to build architecture-based, dynamic system models for dependability-critical systems and then automatically generate Dynamic Fault Trees (DFT) for comprehensive, toolsupported reliability analysis. Specifically, we use the Architectural Analysis and Design Language (AADL) to model the structural, behavioral and failure aspects of the system in a composite architecture model. From the AADL model, we seek to derive the DFT(s) and use Galileo's automated reliability analyses to estimate system reliability. This approach alleviates the dependability engineering - systems engineering knowledge expertise gap, integrates the dependability and system engineering design and development processes and enables a more formal, automated and consistent DFT construction. We illustrate this work using an example based on a dynamic digital feed-water control system for a nuclear reactor

  18. Comparison between state graphs and fault trees for sequential and repairable systems

    International Nuclear Information System (INIS)

    Soussan, D.; Saignes, P.

    1996-01-01

    In French PSA (Probabilistic Safety Assessment) 1300 for the 1300 Mwe PWR plants carried out by EDF, sequential and reparable systems are modeled with state graphs. This method is particularly convenient for modeling dynamic systems with long-term missions but induces a bad traceability and understandability of models. In the objective of providing elements for rewriting PSA 1300 with only boolean models, EDF has asked CEA to participate to a methodological study. The aim is to carry out a feasibility study of transposition of state graphs models into fault trees on Component Cooling System and Essential Service Water System (CCS/ESWS) and to draw a methodological guide for transposition. The study realized on CCS/ESWS involves two main axes: quantification of cold source loss (as an accident sequence initiating event, called H1); quantification of the CCS/ESWS missions in accident sequences. The subject of this article is to show that this transformation is applicable with minimum distortions of the results and to determine the hypotheses, the conditions and the limits of application of this conversion. (authors). 2 refs

  19. Generation Risk Assessment Using Fault Trees and Turbine Cycle Simulation: Case Studies

    International Nuclear Information System (INIS)

    Heo, Gyun Young; Park, Jin Kyun

    2009-01-01

    Since 2007, Korea Atomic Energy Research Institute and Kyung Hee University have collaborated on the development of the framework to quantify human errors broken out during the test and maintenance (T and M) in secondary systems of nuclear power plants (NPPs). The project entitled 'Development of Causality Analyzer for Maintenance/Test Tasks in Nuclear Power Plants' for OPR1000 on the basis of the proposed framework is still on-going, and will come to fruition by 2010. The overall concept of GRA-HRE (Generation Risk Assessment for Human Related Events) which is the designation of the framework, and the quantification methods for evaluating risk and electric loss have introduced in other references. The originality emerged while implementing GRA-HRE could be evaluated in view of (1) recognizing the relative importance of human errors comparing with other types of mechanical and/or electrical failures, (2) providing the top-down path of the propagation of human errors by designating top events in the fault tree model as trip signals, and (3) analyzing electric loss using turbine cycle simulation. Recently, we were successfully to illustrate the applicability of GRA-HRE by simulating several abnormalities. Since the detailed methodologies were released enough to follow up, this paper is going to only exemplify the case studies

  20. A decision-making framework for protecting process plants from flooding based on fault tree analysis

    International Nuclear Information System (INIS)

    Hauptmanns, Ulrich

    2010-01-01

    The protection of process plants from external events is mandatory in the Seveso Directive. Among these events figures the possibility of inundation of a plant, which may cause a hazard by disabling technical components and obviating operator interventions. A methodological framework for dealing with hazards from potential flooding events is presented. It combines an extension of the fault tree method with generic properties of flooding events in rivers and of dikes, which should be adapted to site-specific characteristics in a concrete case. Thus, a rational basis for deciding whether upgrading is required or not and which of the components should be upgraded is provided. Both the deterministic and the probabilistic approaches are compared. Preference is given to the probabilistic one. The conclusions drawn naturally depend on the scope and detail of the model calculations and the decision criterion adopted. The latter has to be supplied from outside the analysis, e.g. by the analyst himself, the plant operator or the competent authority. It turns out that decision-making is only viable if the boundary conditions for both the procedure of analysis and the decision criterion are clear.

  1. Fault tree analysis of Project S-4404, Upgrade Canyon Exhaust System

    International Nuclear Information System (INIS)

    Browne, E.V.; Low, J.M.; Lux, C.R.

    1992-01-01

    Project S-4404, Upgrade Canyon Exhaust Systems, is a $177 million project with the purpose of upgrading the Exhaust Systems for both F and H Canyon Facilities. This upgrade will replace major portions of the F and H-Canyon exhaust systems, downstream of their respective sand filters with higher capacity and more reliable systems. Because of the high cost, DOE requested Program Control ampersand Integration (PC ampersand I) to examine specific deletions to the project. PC ampersand I requested Nuclear Processes Safety Research (NPSR) to perform an analysis to compare failure rates for the existing F ampersand H Canyon exhaust systems with the proposed exhaust system and specific proposed exhaust system alternatives. The objective of this work was to perform an analysis and compare failure rates for the existing F ampersand H Canyon exhaust systems with the proposed project exhaust system and proposed project alternatives. Based on fault tree analysis, two conclusions are made. First, D ampersand D activities can be eliminated from the project with no significant decrease to exhaust system safety. Deletion of D ampersand D activities would result in a cost savings of $29 million. Second, deletion of DOE Order 6430.1A requirements regarding DBAs would decrease exhaust system safety by a factor of 12

  2. The Development of a Fault Tree Model for Balance of Plant System

    International Nuclear Information System (INIS)

    Hwang, Mee Jeong; Park, Jin Hee; Lim, Ho Gon

    2011-01-01

    In this paper, we propose a fault tree modeling method for BOP (balance of plant) system to develop a combined risk model and trip model, and the application plans of the developed model. Where, the trip means the reactor trip and turbine and generator trip. We have usually modeled the safety-related systems and their supporting systems to assess the risk analysis of a nuclear power plant. However, the BOP system.s condition change induces the risk change. That is, the BOP system.s condition is relevant to plants. performance and affects to the plant risk. The existing model for BOP systems is a simplified system model or SPV (Single-point vulnerability) evaluation model. However, these models are not effective enough to use for the plant's performance evaluation. Also, lately an integrated decision-making framework is required for risk-informed applications. The methods for monitoring the performance of a nuclear power plant differ from the purpose. For example, MSPI (mitigating system performance index) and MR (maintenance rule) use different methods and indexes to monitor the performance. Therefore, for consistent decision-making, it is necessary to develop a risk assessment model including a systems model inducing reactor trip. The system.s model inducing reactor trip and turbine/generator trip is defined as the 'trip model'

  3. Reliability study of the auxiliary feed-water system of a pressurized water reactor by faults tree and Bayesian Network

    International Nuclear Information System (INIS)

    Lava, Deise Diana; Borges, Diogo da Silva; Guimarães, Antonio Cesar Ferreira; Moreira, Maria de Lourdes

    2017-01-01

    This paper aims to present a study of the reliability of the Auxiliary Feed-water System (AFWS) through the methods of Fault Tree and Bayesian Network. Therefore, the paper consists of a literature review of the history of nuclear energy and the methodologies used. The AFWS is responsible for providing water system to cool the secondary circuit of nuclear reactors of the PWR type when normal feeding water system failure. How this system operates only when the primary system fails, it is expected that the AFWS failure probability is very low. The AFWS failure probability is divided into two cases: the first is the probability of failure in the first eight hours of operation and the second is the probability of failure after eight hours of operation, considering that the system has not failed within the first eight hours. The calculation of the probability of failure of the second case was made through the use of Fault Tree and Bayesian Network, that it was constructed from the Fault Tree. The results of the failure probability obtained were very close, on the order of 10 -3 . (author)

  4. Reliability study of the auxiliary feed-water system of a pressurized water reactor by faults tree and Bayesian Network

    Energy Technology Data Exchange (ETDEWEB)

    Lava, Deise Diana; Borges, Diogo da Silva; Guimarães, Antonio Cesar Ferreira; Moreira, Maria de Lourdes, E-mail: deise_dy@hotmail.com, E-mail: diogosb@outlook.com, E-mail: tony@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    This paper aims to present a study of the reliability of the Auxiliary Feed-water System (AFWS) through the methods of Fault Tree and Bayesian Network. Therefore, the paper consists of a literature review of the history of nuclear energy and the methodologies used. The AFWS is responsible for providing water system to cool the secondary circuit of nuclear reactors of the PWR type when normal feeding water system failure. How this system operates only when the primary system fails, it is expected that the AFWS failure probability is very low. The AFWS failure probability is divided into two cases: the first is the probability of failure in the first eight hours of operation and the second is the probability of failure after eight hours of operation, considering that the system has not failed within the first eight hours. The calculation of the probability of failure of the second case was made through the use of Fault Tree and Bayesian Network, that it was constructed from the Fault Tree. The results of the failure probability obtained were very close, on the order of 10{sup -3}. (author)

  5. Fuzzy fault tree assessment based on improved AHP for fire and explosion accidents for steel oil storage tanks.

    Science.gov (United States)

    Shi, Lei; Shuai, Jian; Xu, Kui

    2014-08-15

    Fire and explosion accidents of steel oil storage tanks (FEASOST) occur occasionally during the petroleum and chemical industry production and storage processes and often have devastating impact on lives, the environment and property. To contribute towards the development of a quantitative approach for assessing the occurrence probability of FEASOST, a fault tree of FEASOST is constructed that identifies various potential causes. Traditional fault tree analysis (FTA) can achieve quantitative evaluation if the failure data of all of the basic events (BEs) are available, which is almost impossible due to the lack of detailed data, as well as other uncertainties. This paper makes an attempt to perform FTA of FEASOST by a hybrid application between an expert elicitation based improved analysis hierarchy process (AHP) and fuzzy set theory, and the occurrence possibility of FEASOST is estimated for an oil depot in China. A comparison between statistical data and calculated data using fuzzy fault tree analysis (FFTA) based on traditional and improved AHP is also made. Sensitivity and importance analysis has been performed to identify the most crucial BEs leading to FEASOST that will provide insights into how managers should focus effective mitigation. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. COCOA CMS Object-oriented Code for Optical Alignment

    CERN Document Server

    Arce, P

    2007-01-01

    COCOA is a C++ software that is able to reconstruct the positions, angular orientations, and internal optical parameters of any optical system described by a seamless combination of many different types of optical objects. The program also handles the propagation of uncertainties, which makes it very useful to simulate the system in the design phase. The software is currently in use by the different optical alignment systems of CMS and is integrated in the CMS framework so that it can read the geometry description from simple text files or the CMS XML format, and the input and output data from text files, ROOT trees, or an Oracle or MySQL database.

  7. Design and implementation of visual object-oriented LOGO using Prograph

    OpenAIRE

    Black, Emily M.; Fall, Thierno

    1994-01-01

    This thesis addresses the problem of how best to teach beginning programmers the necessary skills of object oriented programming. There is no established method of introducing object oriented concepts such as encapsulation, inheritance, and polymorphism, or providing an intuitive progression from simple programs to complex problem solving. The approach was to use two commercially available programming languages which we consider exemplify good object oriented programming techniques, to teach ...

  8. Improving Quality in Object-Oriented Software. Systematic Refinement and Translation of Models to Code

    OpenAIRE

    Bunse, C.; Atkinson, C.

    1999-01-01

    The reliable attainment of quality requirements is still a major weakness of the object-oriented development paradigm, with a significant proportion of object-oriented systems either failing to work correctly, or failing to do so in a way that meets non-functional requirements. One of the main reasons for this problem is the discrepancy between the various object-oriented languages/notations typically used during the course of an object-oriented project and the lack of well-defined mappings b...

  9. Principles of object-oriented modeling and simulation with Modelica 2.1

    CERN Document Server

    Fritzson, Peter

    2004-01-01

    A timely introduction to the latest modeling and simulation techniques. Object-oriented modeling is a fast-growing area of modeling and simulation that provides a structured, computer-supported way of doing mathematical and equation-based modeling. Modelica is today's most promising modeling language in that it effectively unifies and generalizes previous object-oriented modeling languages and provides a sound basis for the basic concepts. Principles of Object-Oriented Modeling and Simulation with Modelica 2.1 introduces the latest methods of object-oriented component-based system modeling and

  10. Concept of object-oriented intelligent support for nuclear reactor designing

    International Nuclear Information System (INIS)

    Yoshikawa, H.; Gofuku, A.

    1991-01-01

    A concept of object-oriented intelligent CAD/CAE environment is proposed for the conceptual designing of advanced nuclear reactor system. It is composed of (i) object-oriented frame-structure database which represents the hierarchical relationship of the composite elements of reactor core and the physical properties, and (ii) object-oriented modularization of the elementary calculation processes, which are needed for reactor core design analysis. As an example practise, an object-oriented frame structure is constructed for representing a 3D configuration of a special fuel element of a space reactor design, by using a general-purpose expert system shell ESHELL/X. (author)

  11. Postural and Object-Oriented Experiences Advance Early Reaching, Object Exploration, and Means-End Behavior

    Science.gov (United States)

    Lobo, Michele A.; Galloway, James C.

    2008-01-01

    The effects of 3 weeks of social (control), postural, or object-oriented experiences on 9- to 21-week-old infants' (N = 42) reaching, exploration, and means-end behaviors were assessed. Coders recorded object contacts, mouthing, fingering, attention, and affect from video. Postural and object-oriented experiences advanced reaching, haptic…

  12. Proposed Framework which Uses Object Oriented Principles in Relational Systems: Structure and Formating (Part 2

    Directory of Open Access Journals (Sweden)

    Catalin STRIMBEI

    2006-01-01

    Full Text Available Our approach tries to overcome the limitations of so called “flat nature” of relational systems, in the actual context of actual relational database theories, database systems technologies and object oriented methodologies by proposing an MDA framework to map an object oriented (UML formalized model to object-relational structures of today’s database systems.

  13. Typed Sets as a Basis for Object-Oriented Database Schemas

    NARCIS (Netherlands)

    Balsters, H.; de By, R.A.; Zicari, R.

    The object-oriented data model TM is a language that is based on the formal theory of FM, a typed language with object-oriented features such as attributes and methods in the presence of subtyping. The general (typed) set constructs of FM allow one to deal with (database) constraints in TM. The

  14. Advanced software development workstation: Object-oriented methodologies and applications for flight planning and mission operations

    Science.gov (United States)

    Izygon, Michel

    1993-01-01

    The work accomplished during the past nine months in order to help three different organizations involved in Flight Planning and in Mission Operations systems, to transition to Object-Oriented Technology, by adopting one of the currently most widely used Object-Oriented analysis and Design Methodology is summarized.

  15. An Implementation of the Object-Oriented Concurrent Programming Language SINA

    NARCIS (Netherlands)

    Triphathi, Anand; Berge, Eric; Aksit, Mehmet

    SINA is an object-oriented language for distributed and concurrent programming. The primary focus of this paper is on the object-oriented concurrent programming mechanisms of SINA and their implementation. This paper presents the SINA constructs for concurrent programming and inter-object

  16. Aspects on Teaching/Learning with Object Oriented Programming for Entry Level Courses of Engineering.

    Science.gov (United States)

    de Oliveira, Clara Amelia; Conte, Marcos Fernando; Riso, Bernardo Goncalves

    This work presents a proposal for Teaching/Learning, on Object Oriented Programming for Entry Level Courses of Engineering and Computer Science, on University. The philosophy of Object Oriented Programming comes as a new pattern of solution for problems, where flexibility and reusability appears over the simple data structure and sequential…

  17. Investigating Strain Transfer Along the Southern San Andreas Fault: A Geomorphic and Geodetic Study of Block Rotation in the Eastern Transverse Ranges, Joshua Tree National Park, CA

    Science.gov (United States)

    Guns, K. A.; Bennett, R. A.; Blisniuk, K.

    2017-12-01

    To better evaluate the distribution and transfer of strain and slip along the Southern San Andreas Fault (SSAF) zone in the northern Coachella valley in southern California, we integrate geological and geodetic observations to test whether strain is being transferred away from the SSAF system towards the Eastern California Shear Zone through microblock rotation of the Eastern Transverse Ranges (ETR). The faults of the ETR consist of five east-west trending left lateral strike slip faults that have measured cumulative offsets of up to 20 km and as low as 1 km. Present kinematic and block models present a variety of slip rate estimates, from as low as zero to as high as 7 mm/yr, suggesting a gap in our understanding of what role these faults play in the larger system. To determine whether present-day block rotation along these faults is contributing to strain transfer in the region, we are applying 10Be surface exposure dating methods to observed offset channel and alluvial fan deposits in order to estimate fault slip rates along two faults in the ETR. We present observations of offset geomorphic landforms using field mapping and LiDAR data at three sites along the Blue Cut Fault and one site along the Smoke Tree Wash Fault in Joshua Tree National Park which indicate recent Quaternary fault activity. Initial results of site mapping and clast count analyses reveal at least three stages of offset, including potential Holocene offsets, for one site along the Blue Cut Fault, while preliminary 10Be geochronology is in progress. This geologic slip rate data, combined with our new geodetic surface velocity field derived from updated campaign-based GPS measurements within Joshua Tree National Park will allow us to construct a suite of elastic fault block models to elucidate rates of strain transfer away from the SSAF and how that strain transfer may be affecting the length of the interseismic period along the SSAF.

  18. An object oriented framework of EPICS for MicroTCA based control system

    International Nuclear Information System (INIS)

    Geng, Z.

    2012-01-01

    EPICS (Experimental Physics and Industrial Control System) is a distributed control system platform which has been widely used for large scientific devices control like particle accelerators and fusion plant. EPICS has introduced object oriented (C ++ ) interfaces to most of the core services. But the major part of EPICS, the run-time database, only provides C interfaces, which is hard to involve the EPICS record concerned data and routines in the object oriented architecture of the software. This paper presents an object oriented framework which contains some abstract classes to encapsulate the EPICS record concerned data and routines in C ++ classes so that full OOA (Objected Oriented Analysis) and OOD (Object Oriented Design) methodologies can be used for EPICS IOC design. We also present a dynamic device management scheme for the hot swap capability of the MicroTCA based control system. (authors)

  19. Analytical solutions of linked fault tree probabilistic risk assessments using binary decision diagrams with emphasis on nuclear safety applications

    International Nuclear Information System (INIS)

    Nusbaumer, O. P. M.

    2007-01-01

    This study is concerned with the quantification of Probabilistic Risk Assessment (PRA) using linked Fault Tree (FT) models. Probabilistic Risk assessment (PRA) of Nuclear Power Plants (NPPs) complements traditional deterministic analysis; it is widely recognized as a comprehensive and structured approach to identify accident scenarios and to derive numerical estimates of the associated risk levels. PRA models as found in the nuclear industry have evolved rapidly. Increasingly, they have been broadly applied to support numerous applications on various operational and regulatory matters. Regulatory bodies in many countries require that a PRA be performed for licensing purposes. PRA has reached the point where it can considerably influence the design and operation of nuclear power plants. However, most of the tools available for quantifying large PRA models are unable to produce analytically correct results. The algorithms of such quantifiers are designed to neglect sequences when their likelihood decreases below a predefined cutoff limit. In addition, the rare event approximation (e.g. Moivre's equation) is typically implemented for the first order, ignoring the success paths and the possibility that two or more events can occur simultaneously. This is only justified in assessments where the probabilities of the basic events are low. When the events in question are failures, the first order rare event approximation is always conservative, resulting in wrong interpretation of risk importance measures. Advanced NPP PRA models typically include human errors, common cause failure groups, seismic and phenomenological basic events, where the failure probabilities may approach unity, leading to questionable results. It is accepted that current quantification tools have reached their limits, and that new quantification techniques should be investigated. A novel approach using the mathematical concept of Binary Decision Diagram (BDD) is proposed to overcome these deficiencies

  20. Failure mode and effects analysis and fault tree analysis of surface image guided cranial radiosurgery.

    Science.gov (United States)

    Manger, Ryan P; Paxton, Adam B; Pawlicki, Todd; Kim, Gwe-Ya

    2015-05-01

    Surface image guided, Linac-based radiosurgery (SIG-RS) is a modern approach for delivering radiosurgery that utilizes optical stereoscopic imaging to monitor the surface of the patient during treatment in lieu of using a head frame for patient immobilization. Considering the novelty of the SIG-RS approach and the severity of errors associated with delivery of large doses per fraction, a risk assessment should be conducted to identify potential hazards, determine their causes, and formulate mitigation strategies. The purpose of this work is to investigate SIG-RS using the combined application of failure modes and effects analysis (FMEA) and fault tree analysis (FTA), report on the effort required to complete the analysis, and evaluate the use of FTA in conjunction with FMEA. A multidisciplinary team was assembled to conduct the FMEA on the SIG-RS process. A process map detailing the steps of the SIG-RS was created to guide the FMEA. Failure modes were determined for each step in the SIG-RS process, and risk priority numbers (RPNs) were estimated for each failure mode to facilitate risk stratification. The failure modes were ranked by RPN, and FTA was used to determine the root factors contributing to the riskiest failure modes. Using the FTA, mitigation strategies were formulated to address the root factors and reduce the risk of the process. The RPNs were re-estimated based on the mitigation strategies to determine the margin of risk reduction. The FMEA and FTAs for the top two failure modes required an effort of 36 person-hours (30 person-hours for the FMEA and 6 person-hours for two FTAs). The SIG-RS process consisted of 13 major subprocesses and 91 steps, which amounted to 167 failure modes. Of the 91 steps, 16 were directly related to surface imaging. Twenty-five failure modes resulted in a RPN of 100 or greater. Only one of these top 25 failure modes was specific to surface imaging. The riskiest surface imaging failure mode had an overall RPN-rank of eighth