Gestational weight gain and nutritional state of the newborn: a descriptive study

Directory of Open Access Journals (Sweden)

Kelen Cristina Ramos dos SANTOS

Full Text Available The objective was to characterize puerperal women in relation to gestational weight gain and their newborns in accordance with the nutritional state at birth. This is a descriptive, quantitative and retrospective study approved by the Ethics Committee at the institution responsible. The collection of data was from December 2012 to May 2013. The sample was composed of 24 puerperal women and their children. The participants presented an average age of 26.5 (DP=5.4 years, 79.2% white; 91.7% married; 58.3% multiparous; 75% with a level of education between secondary school and higher education; 58.3% with a low family income; 54.1% presented an altered pre-gestational nutritional state and 75% obtained an inadequate gestational weight gain. 79.2% of the newborns were classified as Adequate for Gestational Age (AIG. The newborns classified as Large for Gestational Age (GIG were from pregnant women that had excessive weight gain or were overweight. It was concluded that health professionals should be attentive to nutritional deviations with the intention of avoiding complications for maternal/fetal health.

Hartree-Fock description of superdeformed states

International Nuclear Information System (INIS)

Dobaczewski, J.; Meyer, J.

1991-10-01

The discovery of superdeformation has been preceded by theoretical predictions made in Nilsson-Strutinsky calculations and a description of the phenomenon still constitutes an exciting challenge to the theory of nuclear collective motion. In particular, a determination of electromagnetic transition rates requires a knowledge of microscopic collective wave functions, which can be achieved by using the Hartree-Fock (HF) theory and the generator coordinate method (GCM). In this study we present results of our calculations concerning the properties and superdeformed states in the mercury region. Using the GCM, we diagonalize the microscopic two-body hamiltonian within the basis set of constrained HF+BCS wave functions. The GCM provides values for the energy of the ground and excited states including the shape isomer which take into account the effect of correlations in the collective degree of freedom. The GCM will also allow us to discuss the qualitative modifications of the shape isomeric stability as induced by changes in pairing correlations

Graphical representation of objects' states for the PF linac control system

International Nuclear Information System (INIS)

Mejuev, I.; Abe, I.; Nakahara, K.

1995-01-01

This paper describes our approach for creating of a graphical representation of the states of accelerator objects. For every object which needs to display its state dynamics we create a chart element. Any changes in the object state are immediately represented on the chart of this object. We use the objects dependencies facility supplied by Smalltalk to keep track of the objects' states changes. This allows us to remove any graphics related features from the Object Model of the accelerator. Thus, the Object Model can be developed separately and reused in a number of applications. (author)

A descriptive analysis of quantitative indices for multi-objective block layout

Directory of Open Access Journals (Sweden)

Amalia Medina Palomera

2013-01-01

Full Text Available Layout generation methods provide alternative solutions whose feasibility and quality must be evaluated. Indices must be used to distinguish the feasible solutions (involving different criteria obtained for block layout to identify s solution’s suitability, according to set objectives. This paper provides an accurate and descriptive analysis of the geometric indices used in designing facility layout (during block layout phase. The indices studied here have advantages and disadvantages which should be considered by an analyst before attempting to resolve the facility layout problem. New equations are proposed for measuring geometric indices. The analysis revealed redundant indices and that a minimum number of indices covering overall quality criteria may be used when selecting alternative solutions.

Detailed description of a state system for accounting for and control of nuclear material at the state level

International Nuclear Information System (INIS)

Jones, R.J.

1985-02-01

The purpose of this document is to provide a detailed description of the technical elements of a system for the accounting for and control of nuclear material at the State Authority level which can be used by a state in the establishment of a national system for nuclear material accounting and control. It is expected that a state system designed along the lines described also will assist the IAEA in carrying out its safeguards responsibilities. The scope of this document is limited to descriptions of the technical elements of a state level system concerned with Laws and Regulations, the Information System, and the Establishment of Requirements for Nuclear Material Accounting and Control. The discussion shows the relationship of these technical elements at the state level to the principal elements of an SSAC at the facility levels

Ecological aspects od electromagnetic irradiation effects of biological objects

International Nuclear Information System (INIS)

Volobuev, A.P.; Donnik, I.M.; Alekseenko, N.N.

2005-01-01

General description of electromagnetic field effects on biological objects depending on its frequency properties is stated in the paper. Basic principles of low frequency field effect (10 -1 -0 2 Hz) are detailed. General and specific regularities of biological objects response to a low frequency field on subcell, cell, and system levels were considered taking into account their functional state. (author)

Compositional mining of multiple object API protocols through state abstraction.

Science.gov (United States)

Dai, Ziying; Mao, Xiaoguang; Lei, Yan; Qi, Yuhua; Wang, Rui; Gu, Bin

2013-01-01

API protocols specify correct sequences of method invocations. Despite their usefulness, API protocols are often unavailable in practice because writing them is cumbersome and error prone. Multiple object API protocols are more expressive than single object API protocols. However, the huge number of objects of typical object-oriented programs poses a major challenge to the automatic mining of multiple object API protocols: besides maintaining scalability, it is important to capture various object interactions. Current approaches utilize various heuristics to focus on small sets of methods. In this paper, we present a general, scalable, multiple object API protocols mining approach that can capture all object interactions. Our approach uses abstract field values to label object states during the mining process. We first mine single object typestates as finite state automata whose transitions are annotated with states of interacting objects before and after the execution of the corresponding method and then construct multiple object API protocols by composing these annotated single object typestates. We implement our approach for Java and evaluate it through a series of experiments.

Technique for description of nonrotational excited states in a semiphenomenological nuclear theory

International Nuclear Information System (INIS)

Krutov, V.A.

1985-01-01

A non-standard technique for microscopic description of excited nonrotational states is considered; it is suitable for inseparable force application. Besides, an additional binding operator, mixing quasi-particle excitations and E1-resonance states, is considered. Instead of the standard technique of state ''collectivization'' of the random phase approximation type it is used the so-called ''method of bound amplitudes''

Modelling object typicality in description logics - [Workshop on Description Logics

CSIR Research Space (South Africa)

Britz, K

2009-07-01

Full Text Available than those not in C. This is a technical construction which allows us to order the entire domain, instead of only the members of C. This leads us to take as starting point a finite set of preference orders f j : j 2 J g on objects in the application... domain, with index set J . If j prefers any object in C to any object outside of C, we call j a C-order. To ensure that the subsumption relations eventually generated are rational [4, 14], we assume the preference orders to be a modular partial...

Towards Integration of Object-Oriented Languages and State Machines

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann

1999-01-01

The goal of this paper is to obtain a one-to-one correspondence between state machines as e.g. used in UML and object-oriented programming languages. A proposal is made for a language mechanism that makes it possible for an object to change its virtual bindings at run-time. A state of an object may...... then be represented as a set of virtual bindings.One advantage of object-orientation is that it provides an integrating perspective on many phases of software development, including analysis, design and implementation. For the static set of OO language constructs there is almost a one-to-one correspondence between...... analysis/design notations and OO programming languages. No such correspondence exists for the dynamic aspects, but the proposed state-mechanism is a contribution to a better cor respondence. The proposal is based on previous work by Antero Taivalsaari and compared to the more complex features for changing...

Another comment on 'relativistic description of quark-antiquark bound states'

International Nuclear Information System (INIS)

Lucha, W.; Rupprecht, H.; Schoeberl, F.F.

1991-04-01

We point out some ambiguities in the treatment of fermion-antifermion bound states by solving the reduced Salpeter equation in coordinate space. Our observations allow to cast some doubt on the validity of the conclusion of Gara et al. that moving from a nonrelativistic to a relativistic description makes things worse. (authors)

Use of state variables in the description of irradiation creep and deformation of metals

International Nuclear Information System (INIS)

Hart, E.W.; Li, C.Y.

1976-01-01

The understanding of the effects of irradiation on metal creep and deformation are not yet satisfactory, owing in part to the limitations on experimentation in radiation environment. Because of such limitations, theoretical considerations must play a strong role. Virtually all of the theoretical considerations currently employed are based on micro-mechanical models for the deformation behavior. The recent theoretical and experimental development of a plastic equation of state for metal deformation has led to the identification of some of the principal micro-mechanisms in phenomenological terms. The role of the individual mechanisms can be related to the state variables of the description, and those variables are directly accessible measurable quantities. This paper explores how irradiation might affect this description. It is shown that the radiation flux and the radiation fluence are expected to affect different components of the equation of state. The resultant description makes considerable use of the information developed in radiation-free environment. 5 fig

Critically Important Object Security System Element Model

Directory of Open Access Journals (Sweden)

I. V. Khomyackov

2012-03-01

Full Text Available A stochastic model of critically important object security system element has been developed. The model includes mathematical description of the security system element properties and external influences. The state evolution of the security system element is described by the semi-Markov process with finite states number, the semi-Markov matrix and the initial semi-Markov process states probabilities distribution. External influences are set with the intensity of the Poisson thread.

Design and implementation of an XML based object-oriented detector description database for CMS

International Nuclear Information System (INIS)

Liendl, M.

2003-04-01

This thesis deals with the development of a detector description database (DDD) for the compact muon solenoid (CMS) experiment at the large hadron collider (LHC) located at the European organization for nuclear research (CERN). DDD is a fundamental part of the CMS offline software with its main applications, simulation and reconstruction. Both are in need of different models of the detector in order to efficiently solve their specific tasks. In the thesis the requirements to a detector description database are analyzed and the chosen solution is described in detail. It comprises the following components: an XML based detector description language, a runtime system that implements an object-oriented transient representation of the detector, and an application programming interface to be used by client applications. One of the main aspects of the development is the design of the DDD components. The starting point is a domain model capturing concisely the characteristics of the problem domain. The domain model is transformed into several implementation models according to the guidelines of the model driven architecture (MDA). Implementation models and appropriate refinements thereof are foundation for adequate implementations. Using the MDA approach, a fully functional prototype was realized in C++ and XML. The prototype was successfully tested through seamless integration into both the simulation and the reconstruction framework of CMS. (author)

Parachuting from fixed objects: descriptive study of 106 fatal events in BASE jumping 1981-2006.

Science.gov (United States)

Westman, A; Rosén, M; Berggren, P; Björnstig, U

2008-06-01

To analyse the characteristics of fatal incidents in fixed object sport parachuting (building, antenna, span, earth (BASE) jumping) and create a basis for prevention. Descriptive epidemiological study. Data on reported fatal injury events (n = 106) worldwide in 1981-2006 retrieved from the BASE fatality list. Human, equipment and environmental factors. Identification of typical fatal incident and injury mechanisms for each of the four fixed object types of BASE jumping (building, antenna, span, earth). Human factors included parachutist free fall instability (loss of body control before parachute deployment), free fall acrobatics and deployment failure by the parachutist. Equipment factors included pilot chute malfunction and parachute malfunction. In cliff jumping (BASE object type E), parachute opening towards the object jumped was the most frequent equipment factor. Environmental factors included poor visibility, strong or turbulent winds, cold and water. The overall annual fatality risk for all object types during the year 2002 was estimated at about one fatality per 60 participants. Participants in BASE jumping should target risk factors with training and technical interventions. The mechanisms described in this study should be used by rescue units to improve the management of incidents.

42 CFR 457.710 - State plan requirements: Strategic objectives and performance goals.

Science.gov (United States)

2010-10-01

.... The State's strategic objectives, performance goals and performance measures must include a common... 42 Public Health 4 2010-10-01 2010-10-01 false State plan requirements: Strategic objectives and...) ALLOTMENTS AND GRANTS TO STATES Strategic Planning, Reporting, and Evaluation § 457.710 State plan...

Voice analysis as an objective state marker in bipolar disorder

DEFF Research Database (Denmark)

Faurholt-Jepsen, M.; Busk, Jonas; Frost, M.

2016-01-01

Changes in speech have been suggested as sensitive and valid measures of depression and mania in bipolar disorder. The present study aimed at investigating (1) voice features collected during phone calls as objective markers of affective states in bipolar disorder and (2) if combining voice...... features, automatically generated objective smartphone data on behavioral activities and electronic self-monitored data were collected from 28 outpatients with bipolar disorder in naturalistic settings on a daily basis during a period of 12 weeks. Depressive and manic symptoms were assessed using...... and electronic self-monitored data increased the accuracy, sensitivity and specificity of classification of affective states slightly. Voice features collected in naturalistic settings using smartphones may be used as objective state markers in patients with bipolar disorder....

Developmental changes in children’s processing of redundant modifiers in definite object descriptions

Directory of Open Access Journals (Sweden)

Ruud Koolen

2016-12-01

Full Text Available This paper investigates developmental changes in children’s processing of redundant information in definite object descriptions. In two experiments, children of two age groups (six or seven, and nine or ten years old were presented with pictures of sweets. In the first experiment (pairwise comparison, two identical sweets were shown, and one of these was described with a redundant modifier. After the description, the children had to indicate the sweet they preferred most in a forced-choice task. In the second experiment (graded rating, only one sweet was shown, which was described with a redundant color modifier in half of the cases (e.g., the blue sweet and in the other half of the cases simply as the sweet. This time, the children were asked to indicate on a 5-point rating scale to what extent they liked the sweets. In both experiments, the results showed that the younger children had a preference for the sweets described with redundant information, while redundant information did not have an effect on the preferences for the older children. These results imply that children are learning to distinguish between situations in which redundant information carries an implicature and situations in which this is not the case.

Generating descriptive visual words and visual phrases for large-scale image applications.

Science.gov (United States)

Zhang, Shiliang; Tian, Qi; Hua, Gang; Huang, Qingming; Gao, Wen

2011-09-01

Bag-of-visual Words (BoWs) representation has been applied for various problems in the fields of multimedia and computer vision. The basic idea is to represent images as visual documents composed of repeatable and distinctive visual elements, which are comparable to the text words. Notwithstanding its great success and wide adoption, visual vocabulary created from single-image local descriptors is often shown to be not as effective as desired. In this paper, descriptive visual words (DVWs) and descriptive visual phrases (DVPs) are proposed as the visual correspondences to text words and phrases, where visual phrases refer to the frequently co-occurring visual word pairs. Since images are the carriers of visual objects and scenes, a descriptive visual element set can be composed by the visual words and their combinations which are effective in representing certain visual objects or scenes. Based on this idea, a general framework is proposed for generating DVWs and DVPs for image applications. In a large-scale image database containing 1506 object and scene categories, the visual words and visual word pairs descriptive to certain objects or scenes are identified and collected as the DVWs and DVPs. Experiments show that the DVWs and DVPs are informative and descriptive and, thus, are more comparable with the text words than the classic visual words. We apply the identified DVWs and DVPs in several applications including large-scale near-duplicated image retrieval, image search re-ranking, and object recognition. The combination of DVW and DVP performs better than the state of the art in large-scale near-duplicated image retrieval in terms of accuracy, efficiency and memory consumption. The proposed image search re-ranking algorithm: DWPRank outperforms the state-of-the-art algorithm by 12.4% in mean average precision and about 11 times faster in efficiency.

The Development of Innovation Systems as an Object with the State Regulation

Directory of Open Access Journals (Sweden)

Melnyk Alexander G.

2017-09-01

Full Text Available The article examines the processes of structuring the environment for the development of innovation systems in terms of the formation of a State regulated object. A methodological approach to definition of the State regulation at the primary, secondary and tertiary levels of structuring the environment of innovation systems has been suggested, based on the premise of the objective nature of the integration of social environment and market mechanisms into the structure of an object with the State regulation for the development of innovation systems. The definition of innovative systems as an object with the State regulation in terms of structural-organizational and functional areas of their expansion has been presented. A model for the progressive extension of the State regulated object by means of the development of innovation systems at the primary, secondary and tertiary levels of the structuring of environment in the process of formation of the institutional and technological structures of innovation systems has been proposed.

Unambiguous discrimination of mixed states: A description based on system-ancilla coupling

International Nuclear Information System (INIS)

Zhou, Xiang-Fa; Zhang, Yong-Sheng; Guo, Guang-Can

2007-01-01

We propose a general description for the unambiguous discrimination of mixed states according to the system-environment coupling, and present a procedure to reduce this to a standard semidefinite programming problem. In the two-state case, we introduce the canonical vectors and partly simplify the problem to the case of discrimination between pairs of canonical vectors. By considering the positivity of the 2x2 matrices, we obtain a series of new upper bounds for the total success probability, which depends on both the prior probabilities and specific state structures

Voice analysis as an objective state marker in bipolar disorder

DEFF Research Database (Denmark)

Faurholt-Jepsen, M.; Busk, Jonas; Frost, M.

2016-01-01

features with automatically generated objective smartphone data on behavioral activities (for example, number of text messages and phone calls per day) and electronic self-monitored data (mood) on illness activity would increase the accuracy as a marker of affective states. Using smartphones, voice...... features, automatically generated objective smartphone data on behavioral activities and electronic self-monitored data were collected from 28 outpatients with bipolar disorder in naturalistic settings on a daily basis during a period of 12 weeks. Depressive and manic symptoms were assessed using...... to be more accurate, sensitive and specific in the classification of manic or mixed states with an area under the curve (AUC)=0.89 compared with an AUC=0.78 for the classification of depressive states. Combining voice features with automatically generated objective smartphone data on behavioral activities...

Controlling Business Object States in Business Process Models to Support Compliance

OpenAIRE

Peņicina, L

2016-01-01

The doctoral thesis addresses the existing gap between business process models and states of business objects. Existing modelling methods such as BPMN and ArchiMate lack an explicitly declarative approach for capturing states of business objects and laws of state transitions. This gap hinders the compliance of business process models with regulations imposed internally or externally, and can result in potential legal problems for organizations. Also this g...

Physics 3204. Course Description.

Science.gov (United States)

Newfoundland and Labrador Dept. of Education.

A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

Model potential for the description of metal/organic interface states

Science.gov (United States)

Armbrust, Nico; Schiller, Frederik; Güdde, Jens; Höfer, Ulrich

2017-01-01

We present an analytical one-dimensional model potential for the description of electronic interface states that form at the interface between a metal surface and flat-lying adlayers of π-conjugated organic molecules. The model utilizes graphene as a universal representation of these organic adlayers. It predicts the energy position of the interface state as well as the overlap of its wave function with the bulk metal without free fitting parameters. We show that the energy of the interface state depends systematically on the bond distance between the carbon backbone of the adayers and the metal. The general applicability and robustness of the model is demonstrated by a comparison of the calculated energies with numerous experimental results for a number of flat-lying organic molecules on different closed-packed metal surfaces that cover a large range of bond distances. PMID:28425444

Multi-objective optimization of linear multi-state multiple sliding window system

International Nuclear Information System (INIS)

Konak, Abdullah; Kulturel-Konak, Sadan; Levitin, Gregory

2012-01-01

This paper considers the optimal element sequencing in a linear multi-state multiple sliding window system that consists of n linearly ordered multi-state elements. Each multi-state element can have different states: from complete failure up to perfect functioning. A performance rate is associated with each state. The failure of type i in the system occurs if for any i (1≤i≤I) the cumulative performance of any r i consecutive elements is lower than w i . The element sequence strongly affects the probability of any type of system failure. The sequence that minimizes the probability of certain type of failure can provide high probability of other types of failures. Therefore the optimization problem for the multiple sliding window system is essentially multi-objective. The paper formulates and solves the multi-objective optimization problem for the multiple sliding window systems. A multi-objective Genetic Algorithm is used as the optimization engine. Illustrative examples are presented.

A Large-Scale 3D Object Recognition dataset

DEFF Research Database (Denmark)

Sølund, Thomas; Glent Buch, Anders; Krüger, Norbert

2016-01-01

geometric groups; concave, convex, cylindrical and flat 3D object models. The object models have varying amount of local geometric features to challenge existing local shape feature descriptors in terms of descriptiveness and robustness. The dataset is validated in a benchmark which evaluates the matching...... performance of 7 different state-of-the-art local shape descriptors. Further, we validate the dataset in a 3D object recognition pipeline. Our benchmark shows as expected that local shape feature descriptors without any global point relation across the surface have a poor matching performance with flat...

Description of a stable scheme for steady-state coupled Monte Carlo–thermal–hydraulic calculations

International Nuclear Information System (INIS)

Dufek, Jan; Eduard Hoogenboom, J.

2014-01-01

Highlights: • A stable coupling scheme for steady-state MC–TH calculations is described. • The coupling scheme is based on the stochastic approximation method. • The neutron flux (or power) distribution is relaxed using a variable step-size. - Abstract: We provide a detailed description of a numerically stable and efficient coupling scheme for steady-state Monte Carlo neutronic calculations with thermal–hydraulic feedback. While we have previously derived and published the stochastic approximation based method for coupling the Monte Carlo criticality and thermal–hydraulic calculations, its possible implementation has not been described in a step-by-step manner. As the simple description of the coupling scheme was repeatedly requested from us, we have decided to make it available via this note

Effect of the shape of a nano-object on quantum-size states

International Nuclear Information System (INIS)

Dzyuba, Vladimir; Kulchin, Yurii; Milichko, Valentin

2012-01-01

In this paper, we propose an original functional method that makes it easy to determine the effect of any deviation in the shape of a nano-object from the well-studied shape (e.g., spherical) on the quantum characteristics of charge localized inside the nano-object. The maximum dimension of the object is determined by the magnitude of influence of quantum-size effects on quantum states of charge, and is limited by 100 nm. This method is ideologically similar to the perturbation theory, but the perturbation of the surface shape, rather than the potential, is used. Unlike the well-known variational methods of theoretical physics, this method is based on the assumption that the physical quantity is a functional of surface shape. Using the method developed, we present the quantum-size state of charges for two different complex shapes of nano-objects. The results from analyzing the quantum-size states of charge in the nano-objects with a deformed spherical shape indicated that the shape perturbations have a larger effect on the probability density of locating a particle inside the nano-object than on the surface energy spectrum and quantum density of the states.

Fundamental Objectives and Directives Principles of State Policy: A ...

African Journals Online (AJOL)

Corruption is a term that is eclectic. It is a global phenomenon that has paired itself with both past and present civilizations. Financial corruption is a variant of this obnoxious ill of modern state, Nigeria not being an exception. The provisions of the Fundamental Objectives and Directive Principles of State policy in the ...

Multi-objective evolutionary optimisation for product design and manufacturing

CERN Document Server

2011-01-01

Presents state-of-the-art research in the area of multi-objective evolutionary optimisation for integrated product design and manufacturing Provides a comprehensive review of the literature Gives in-depth descriptions of recently developed innovative and novel methodologies, algorithms and systems in the area of modelling, simulation and optimisation

The Development of Innovation Systems as an Object with the State Regulation

OpenAIRE

Melnyk Alexander G.

2017-01-01

The article examines the processes of structuring the environment for the development of innovation systems in terms of the formation of a State regulated object. A methodological approach to definition of the State regulation at the primary, secondary and tertiary levels of structuring the environment of innovation systems has been suggested, based on the premise of the objective nature of the integration of social environment and market mechanisms into the structure of an object with the St...

A novel binary shape context for 3D local surface description

Science.gov (United States)

Dong, Zhen; Yang, Bisheng; Liu, Yuan; Liang, Fuxun; Li, Bijun; Zang, Yufu

2017-08-01

3D local surface description is now at the core of many computer vision technologies, such as 3D object recognition, intelligent driving, and 3D model reconstruction. However, most of the existing 3D feature descriptors still suffer from low descriptiveness, weak robustness, and inefficiency in both time and memory. To overcome these challenges, this paper presents a robust and descriptive 3D Binary Shape Context (BSC) descriptor with high efficiency in both time and memory. First, a novel BSC descriptor is generated for 3D local surface description, and the performance of the BSC descriptor under different settings of its parameters is analyzed. Next, the descriptiveness, robustness, and efficiency in both time and memory of the BSC descriptor are evaluated and compared to those of several state-of-the-art 3D feature descriptors. Finally, the performance of the BSC descriptor for 3D object recognition is also evaluated on a number of popular benchmark datasets, and an urban-scene dataset is collected by a terrestrial laser scanner system. Comprehensive experiments demonstrate that the proposed BSC descriptor obtained high descriptiveness, strong robustness, and high efficiency in both time and memory and achieved high recognition rates of 94.8%, 94.1% and 82.1% on the considered UWA, Queen, and WHU datasets, respectively.

22 CFR 92.2 - Description of overseas notarial functions of the Department of State, record of acts.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Description of overseas notarial functions of the Department of State, record of acts. 92.2 Section 92.2 Foreign Relations DEPARTMENT OF STATE LEGAL... officers of the Department of State is similar to the function of a notary public in the United States. See...

The description-experience gap and its relation to instructional control: Do people rely more on their experience than in objective descriptions?

Directory of Open Access Journals (Sweden)

Álvaro Viúdez

2017-11-01

Full Text Available The present work aims to reveal contradictory results obtained on two different fields; particularly from two studies conducted on the description-experience gap field showing that descriptions are neglected when personal experience is available (1,2, and several others conducted on the instructional control field getting to the opposite conclusion (3–8. To account for this contradiction, we hypothesized that participants from the studies of Jessup, Bishara and Busemeyer (1 and Lejarraga and Gonzalez (2 relied on their experience rather than on the descriptions because of the difficult, demanding nature of the probabilistic descriptions they faced. Enriched descriptions were created in our experiment to assess the contribution of this factor to the differential influence of the descriptions in choice behavior. Nonetheless, our hypothesis did not find support in the results and further research is needed to account for the aforementioned contradiction.

Lexical references to sensory modalities in verbal descriptions of people and objects by congenitally blind, late blind and sighted adults.

Science.gov (United States)

Chauvey, Valérie; Hatwell, Yvette; Verine, Bertrand; Kaminski, Gwenael; Gentaz, Edouard

2012-01-01

Some previous studies have revealed that while congenitally blind people have a tendency to refer to visual attributes ('verbalism'), references to auditory and tactile attributes are scarcer. However, this statement may be challenged by current theories claiming that cognition is linked to the perceptions and actions from which it derives. Verbal productions by the blind could therefore differ from those of the sighted because of their specific perceptual experience. The relative weight of each sense in oral descriptions was compared in three groups with different visual experience Congenitally blind (CB), late blind (LB) and blindfolded sighted (BS) adults. Participants were asked to give an oral description of their mother and their father, and of four familiar manually-explored objects. The number of visual references obtained when describing people was relatively high, and was the same in the CB and BS groups ("verbalism" in the CB). While references to touch were scarce in all groups, the CB referred to audition more frequently than the LB and the BS groups. There were, by contrast, no differences between groups in descriptions of objects, and references to touch dominated the other modalities. The relative weight of each modality varies according to the cognitive processes involved in each task. Long term memory, internal representations and information acquired through social communication, are at work in the People task, seem to favour visual references in both the blind and the sighted, whereas the congenitally blind also refer often to audition. By contrast, the perceptual encoding and working memory at work in the Objects task enhance sensory references to touch in a similar way in all groups. These results attenuate the impact of verbalism in blindness, and support (albeit moderately) the idea that the perceptual experience of the congenitally blind is to some extent reflected in their cognition.

Lexical references to sensory modalities in verbal descriptions of people and objects by congenitally blind, late blind and sighted adults.

Directory of Open Access Journals (Sweden)

Valérie Chauvey

Full Text Available BACKGROUND: Some previous studies have revealed that while congenitally blind people have a tendency to refer to visual attributes ('verbalism', references to auditory and tactile attributes are scarcer. However, this statement may be challenged by current theories claiming that cognition is linked to the perceptions and actions from which it derives. Verbal productions by the blind could therefore differ from those of the sighted because of their specific perceptual experience. The relative weight of each sense in oral descriptions was compared in three groups with different visual experience Congenitally blind (CB, late blind (LB and blindfolded sighted (BS adults. METHODOLOGY/PRINCIPAL FINDINGS: Participants were asked to give an oral description of their mother and their father, and of four familiar manually-explored objects. The number of visual references obtained when describing people was relatively high, and was the same in the CB and BS groups ("verbalism" in the CB. While references to touch were scarce in all groups, the CB referred to audition more frequently than the LB and the BS groups. There were, by contrast, no differences between groups in descriptions of objects, and references to touch dominated the other modalities. CONCLUSION/SIGNIFICANCE: The relative weight of each modality varies according to the cognitive processes involved in each task. Long term memory, internal representations and information acquired through social communication, are at work in the People task, seem to favour visual references in both the blind and the sighted, whereas the congenitally blind also refer often to audition. By contrast, the perceptual encoding and working memory at work in the Objects task enhance sensory references to touch in a similar way in all groups. These results attenuate the impact of verbalism in blindness, and support (albeit moderately the idea that the perceptual experience of the congenitally blind is to some extent

Quantum Description of Optical Devices Used in Interferometry

Directory of Open Access Journals (Sweden)

P. Kucera

2007-09-01

Full Text Available A quantum-mechanical description of the phase shifters, retarders, mirrors and beam splitters is given in the paper. The description is then applied on two types of states. On a coherent state, a classical-like state, and on a number state, hence the strict quantum state. The quantum description of a beam splitter can be found in the literature. However the description does not treat with the polarization concept. The paper is aimed to introduce quantum description of an arbitrary oriented retarder and give a description of a beam splitter which treats with the polarization.

Level crossing analysis of chemically induced dynamic nuclear polarization: Towards a common description of liquid-state and solid-state cases

Energy Technology Data Exchange (ETDEWEB)

Sosnovsky, Denis V.; Ivanov, Konstantin L., E-mail: ivanov@tomo.nsc.ru [International Tomography Centre of SB RAS, Institutskaya 3a, 630090, Novosibirsk (Russian Federation); Novosibirsk State University, Pirogova 2, 630090, Novosibirsk (Russian Federation); Jeschke, Gunnar [Institut für Physikalische Chemie, ETH Zürich, Vladimir-Prelog-Weg 2, CH-8093 Zürich (Switzerland); Matysik, Jörg [Institut für Analytische Chemie, Universität Leipzig, Linnéstr. 3, D-04103 Leipzig (Germany); Vieth, Hans-Martin [International Tomography Centre of SB RAS, Institutskaya 3a, 630090, Novosibirsk (Russian Federation); Institut für Experimentalphysik, Freie Universität Berlin, Arnimallee 14, D-14195 Berlin (Germany)

2016-04-14

Chemically Induced Dynamic Nuclear Polarization (CIDNP) is an efficient method of creating non-equilibrium polarization of nuclear spins by using chemical reactions, which have radical pairs as intermediates. The CIDNP effect originates from (i) electron spin-selective recombination of radical pairs and (ii) the dependence of the inter-system crossing rate in radical pairs on the state of magnetic nuclei. The CIDNP effect can be investigated by using Nuclear Magnetic Resonance (NMR) methods. The gain from CIDNP is then two-fold: it allows one to obtain considerable amplification of NMR signals; in addition, it provides a very useful tool for investigating elusive radicals and radical pairs. While the mechanisms of the CIDNP effect in liquids are well established and understood, detailed analysis of solid-state CIDNP mechanisms still remains challenging; likewise a common theoretical frame for the description of CIDNP in both solids and liquids is missing. Difficulties in understanding the spin dynamics that lead to the CIDNP effect in the solid-state case are caused by the anisotropy of spin interactions, which increase the complexity of spin evolution. In this work, we propose to analyze CIDNP in terms of level crossing phenomena, namely, to attribute features in the CIDNP magnetic field dependence to Level Crossings (LCs) and Level Anti-Crossings (LACs) in a radical pair. This approach allows one to describe liquid-state CIDNP; the same holds for the solid-state case where anisotropic interactions play a significant role in CIDNP formation. In solids, features arise predominantly from LACs, since in most cases anisotropic couplings result in perturbations, which turn LCs into LACs. We have interpreted the CIDNP mechanisms in terms of the LC/LAC concept. This consideration allows one to find analytical expressions for a wide magnetic field range, where several different mechanisms are operative; furthermore, the LAC description gives a way to determine CIDNP sign

Emission-line galaxies and quasars in the southern hemisphere. I. Description and applications of an objective-prism survey

International Nuclear Information System (INIS)

Smith, M.G.

1975-01-01

A selection of objects from the first plates of a low-dispersion, objective-prism survey for emission-line galaxies and quasars is used to illustrate the application of the survey to the following lines of research in extragalactic astronomy: quasi-stellar objects, Seyfert galaxies, instabilities in galaxies produced by tidal interaction or explosive events, and rates of star formation and the general chemical evolution of galaxies. Included in the discussion is a description of how the survey provides a new, purely optical, color-independent method for the direct isolation of bright, high-redshift QSOs with strong emission lines (Lα is often directly visible on the Schmidt-survey plates). The newly discovered objects used for illustration are a radio-quiet QSO of redshift 2.07, a luminous, class 2 Seyfert galaxy, a compact blue emission-line galaxy with a jet or streamer, yet with no obvious interacting companion, and a blue galaxy with Hβ flux 50 times that of 30 Doradus, and low metal abundances, which is undergoing a very intense burst of star formation. These objects are to be discussed in greater detail in subsequent papers in this series

Description logics of context

CSIR Research Space (South Africa)

Klarman, S

2013-05-01

Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

Macroscopic description of complex adaptive networks coevolving with dynamic node states

Science.gov (United States)

Wiedermann, Marc; Donges, Jonathan F.; Heitzig, Jobst; Lucht, Wolfgang; Kurths, Jürgen

2015-05-01

In many real-world complex systems, the time evolution of the network's structure and the dynamic state of its nodes are closely entangled. Here we study opinion formation and imitation on an adaptive complex network which is dependent on the individual dynamic state of each node and vice versa to model the coevolution of renewable resources with the dynamics of harvesting agents on a social network. The adaptive voter model is coupled to a set of identical logistic growth models and we mainly find that, in such systems, the rate of interactions between nodes as well as the adaptive rewiring probability are crucial parameters for controlling the sustainability of the system's equilibrium state. We derive a macroscopic description of the system in terms of ordinary differential equations which provides a general framework to model and quantify the influence of single node dynamics on the macroscopic state of the network. The thus obtained framework is applicable to many fields of study, such as epidemic spreading, opinion formation, or socioecological modeling.

一种基于并行对象的可视化描述%A Visual Description Based on Concurrent Objects

Institute of Scientific and Technical Information of China (English)

黄永忠; 李国巨; 郭金庚

2001-01-01

This paper puts forward a visual concurrent programming model based on concurrent objects,which absorbs the basic thought of UML,class diagram is used to describe concurrent classes,shared classes ,general classes in SPC++ and the relationships among these olasses. Through the visual description system can generate the code framework automatically.

Generating description with multi-feature fusion and saliency maps of image

Science.gov (United States)

Liu, Lisha; Ding, Yuxuan; Tian, Chunna; Yuan, Bo

2018-04-01

Generating description for an image can be regard as visual understanding. It is across artificial intelligence, machine learning, natural language processing and many other areas. In this paper, we present a model that generates description for images based on RNN (recurrent neural network) with object attention and multi-feature of images. The deep recurrent neural networks have excellent performance in machine translation, so we use it to generate natural sentence description for images. The proposed method uses single CNN (convolution neural network) that is trained on ImageNet to extract image features. But we think it can not adequately contain the content in images, it may only focus on the object area of image. So we add scene information to image feature using CNN which is trained on Places205. Experiments show that model with multi-feature extracted by two CNNs perform better than which with a single feature. In addition, we make saliency weights on images to emphasize the salient objects in images. We evaluate our model on MSCOCO based on public metrics, and the results show that our model performs better than several state-of-the-art methods.

Descriptions of health states associated with increasing severity and frequency of hypoglycemia: a patient-level perspective

Directory of Open Access Journals (Sweden)

Harris SB

2013-09-01

Full Text Available Stewart B Harris,1 Kamlesh Khunti,2 Mona Landin-Olsson,3 Claus B Galbo-Jørgensen,4 Mette Bøgelund,4 Barrie Chubb,5 Jens Gundgaard,6 Marc Evans71Schulich School of Medicine and Dentistry, Western University, London, ON, Canada; 2Diabetes Research Unit, University of Leicester, Leicester, UK; 3Department of Medicine, Helsingborg Hospital, Lund University, Lund, Sweden; 4Incentive, Holte Stationsvej, Holte, Denmark; 5EU Health Economics and Outcomes Research, Novo Nordisk Ltd, Crawley, UK; 6Health Economics and HTA, Novo Nordisk A/S, Søborg, Denmark; 7Department of Diabetes, University Hospital Llandough, Cardiff, UKAims: We sought to develop descriptions of health states associated with daytime and nocturnal hypoglycemia in a structured fashion from the patient's perspective under different combinations of severity and frequency of hypoglycemic events.Methods: An expert meeting followed by two patient focus groups was used to develop comprehensive descriptions of acute consequences of severe and non-severe, daytime and nocturnal hypoglycemia. Patients with diabetes (type 1 = 85, type 2 = 162 from a survey panel then validated these descriptions and assessed how often they worried and took different actions to prevent hypoglycemia. Severity and frequency of hypoglycemia were compared with respect to how often people worried and took actions to prevent an event. The effect of hypoglycemia on 35 different life activities was quantitatively compared for patients who had and had not experienced a severe hypoglycemic event.Results: At least 95% of respondents agreed that the detailed patient-level descriptions of health states accurately reflected their experience of severe and non-severe, daytime and nocturnal hypoglycemia, thereby validating these descriptions. Respondents who had experienced a severe hypoglycemic event were generally more adversely affected in their worries and actions and life events than those who experienced only non

Deep-Inelastic Final States in a Space-Time Description of Shower Development and Hadronization

OpenAIRE

Ellis, John; Geiger, Klaus; Kowalski, Henryk

1996-01-01

We extend a quantum kinetic approach to the description of hadronic showers in space, time and momentum space to deep-inelastic $ep$ collisions, with particular reference to experiments at HERA. We follow the history of hard scattering events back to the initial hadronic state and forward to the formation of colour-singlet pre-hadronic clusters and their decays into hadrons. The time evolution of the space-like initial-state shower and the time-like secondary partons are treated similarly, an...

MATHEMATICAL SUPPORT OF THE INTELLIGENT INFORMATION SYSTEM OF ASSESSING THE OBJECT STATE

Directory of Open Access Journals (Sweden)

Sofiia Yakubovska

2017-11-01

Full Text Available At present, information technologies (IT are intensively used all over the world in various sectors, and today medical institutions cannot do without them when organizing the process of medical diagnostic. The IT efficiency is determined by the degree of their intellectualization that is by including knowledge bases as their component and by the transition from data processing to the processing of knowledge. The efficiency of making decisions in various areas of activity is determined by the quality and quick delivery of information. Medicine constitutes no exception in this sense. The advanced level of computer technology, applied tools, diagnostics on the basis of automated systems of decision support made it possible to solve the tasks of assessing the state of the object at a qualitatively new level. The subject matter of this study is to ensure the mathematical support of the intelligent information system (IS of assessing the state of the object. The object is understood as a patient who came through a myocardial infarction (MI. The goal of the study is to develop mathematical support of the intelligent IS of assessing and predicting a patient’s condition. To achieve the stated goal, the following tasks were solved: statistically valid and uncorrelated signs were specified; these signs enable distinguishing the group of patients who survived from those who died, “decisive rules” were formulated for predicting the MI clinical outcome. In the process of the study, the mathematical IT of assessing the state of the object was developed. The following result was obtained: the suggested mathematical models for predicting the outcome of myocardial infarction that were developed with the use of the method of discriminant function and took into account human blood values can prevent sudden coronary death and improve the diagnostic efficiency. Conclusions. Mathematical models were developed to predict the state of the object in the event of

Poetry magazines: description of an object

Directory of Open Access Journals (Sweden)

Carlos Battilana

2015-02-01

Full Text Available This article sets out to examine different mechanisms of poetry magazines as objects of reflections per se. Literary magazines have a cartographical quality in the sense that they organize the map of a group of works and authors. A magazine produces a critical system of selection. Far from suggesting a stable nature of literary magazines, each of their interventions influences a concrete community and temporality in different ways, which turns each historical moment into a stimulus whose effects are not known beforehand.

A Descriptive Analysis of Care Provided by Law Enforcement Prior to EMS Arrival in the United States.

Science.gov (United States)

Klassen, Aaron B; Core, S Brent; Lohse, Christine M; Sztajnkrycer, Matthew D

2018-04-01

Study Objectives Law enforcement is increasingly viewed as a key component in the out-of-hospital chain of survival, with expanded roles in cardiac arrest, narcotic overdose, and traumatic bleeding. Little is known about the nature of care provided by law enforcement prior to the arrival of Emergency Medical Services (EMS) assets. The purpose of the current study was to perform a descriptive analysis of events reported to a national EMS database. This study was a descriptive analysis of the 2014 National Emergency Medical Services Information System (NEMSIS) public release research data set, containing EMS emergency response data from 41 states. Code E09_02 1200 specifically identifies care provided by law enforcement prior to EMS arrival. A total of 25,835,729 unique events were reported. Of events in which pre-arrival care was documented, 2.0% received prior aid by law enforcement. Patients receiving law enforcement care prior to EMS arrival were more likely to be younger (52.8 [SD=23.3] years versus 58.7 [SD=23.3] years), male (54.8% versus 46.7%), and white (80.3% versus 77.5%). Basic Life Support (BLS) EMS response was twice as likely in patients receiving prior aid by law enforcement. Multiple-casualty incidents were five times more likely with prior aid by law enforcement. Compared with prior aid by other services, law enforcement pre-arrival care was more likely with motor vehicle accidents, firearm assaults, knife assaults, blunt assaults, and drug overdoses, and less likely at falls and childbirths. Cardiac arrest was significantly more common in patients receiving prior aid by law enforcement (16.5% versus 2.6%). Tourniquet application and naloxone administration were more common in the law enforcement prior aid group. Where noted, law enforcement pre-arrival care occurs in 2.0% of EMS patient encounters. The majority of cases involve cardiac arrest, motor vehicle accidents, and assaults. Better understanding of the nature of law enforcement care is

Topological BF field theory description of topological insulators

International Nuclear Information System (INIS)

Cho, Gil Young; Moore, Joel E.

2011-01-01

Research highlights: → We show that a BF theory is the effective theory of 2D and 3D topological insulators. → The non-gauge-invariance of the bulk theory yields surface terms for a bosonized Dirac fermion. → The 'axion' term in electromagnetism is correctly obtained from gapped surfaces. → Generalizations to possible fractional phases are discussed in closing. - Abstract: Topological phases of matter are described universally by topological field theories in the same way that symmetry-breaking phases of matter are described by Landau-Ginzburg field theories. We propose that topological insulators in two and three dimensions are described by a version of abelian BF theory. For the two-dimensional topological insulator or quantum spin Hall state, this description is essentially equivalent to a pair of Chern-Simons theories, consistent with the realization of this phase as paired integer quantum Hall effect states. The BF description can be motivated from the local excitations produced when a π flux is threaded through this state. For the three-dimensional topological insulator, the BF description is less obvious but quite versatile: it contains a gapless surface Dirac fermion when time-reversal-symmetry is preserved and yields 'axion electrodynamics', i.e., an electromagnetic E . B term, when time-reversal symmetry is broken and the surfaces are gapped. Just as changing the coefficients and charges of 2D Chern-Simons theory allows one to obtain fractional quantum Hall states starting from integer states, BF theory could also describe (at a macroscopic level) fractional 3D topological insulators with fractional statistics of point-like and line-like objects.

Objective Versus Subjective Military Pilot Selection Methods in the United States of America

Science.gov (United States)

2015-12-14

a computerized test designed to assess pilot skills by measuring spatial orientation and psychomotor skills and multitasking . The second is the...AFRL-SA-WP-SR-2015-0028 Objective Versus Subjective Military Pilot Selection Methods in the United States of America Joe...September 2014 4. TITLE AND SUBTITLE Objective Versus Subjective Military Pilot Selection Methods in the United States of America 5a. CONTRACT

Physically coupling two objects in a bimanual task alters kinematics but not end-state comfort.

Science.gov (United States)

Hughes, Charmayne M L; Haddad, Jeffrey M; Franz, Elizabeth A; Zelaznik, Howard N; Ryu, Joong Hyun

2011-06-01

People often grasp objects with an awkward grip to ensure a comfortable hand posture at the end of the movement. This end-state comfort effect is a predominant constraint during unimanual movements. However, during bimanual movements the tendency for both hands to satisfy end-state comfort is affected by factors such as end-orientation congruency and task context. Although bimanual end-state comfort has been examined when the hands manipulate two independent objects, no research has examined end-state comfort when the hands are required to manipulate two physically-coupled objects. In the present experiment, kinematics and grasp behavior during a unimanual and bimanual reaching and placing tasks were examined, when the hands manipulate two physically-connected objects. Forty-five participants were assigned to one of three groups; unimanual, bimanual no-spring (the objects were not physically connected), and bimanual spring (the objects were connected by a spring), and instructed to grasp and place objects in various end-orientations, depending on condition. Physically connecting the objects did not affect end-state comfort prevalence. However, it resulted in decreased interlimb coupling. This finding supports the notion of a flexible constraint hierarchy, in which action goals guide the selection of lower level action features (i.e., hand grip used for grasping), and the particular movements used to accomplish that goal (i.e., interlimb coupling) are controlled throughout the movement.

Modelling object typicality in description logics

CSIR Research Space (South Africa)

Britz, K

2009-12-01

Full Text Available in the context under consideration, than those lower down. For any given class C, we assume that all objects in the appli- cation domain that are in (the interpretation of) C are more typical of C than those not in C. This is a technical construction which... to be modular partial orders, i.e. reflexive, transitive, anti- symmetric relations such that, for all a, b, c in ∆I , if a and b are incomparable and a is strictly below c, then b is also strictly below c. Modular partial orders have the effect...

Swing damped movement of suspended objects

International Nuclear Information System (INIS)

Jones, J.F.; Petterson, B.J.; Werner, J.C.

1990-01-01

Transportation of large objects such as nuclear waste shipping casks using overhead cranes can induce pendular motion of the object. Residual oscillation from transportation typically must be damped or allowed to decay before the next process can take place. By properly programming the acceleration of the transporting device (e.g., crane) an oscillation damped transport and swing free stop are obtainable. This report reviews the theory associated with formulating such oscillation damped trajectories for a simply suspended object (e.g., simple pendulum). In addition, the use of force servo damping to eliminate initial oscillation of simply suspended objects is discussed. This is often needed to provide a well defined initial state for the system prior to executing an oscillation damped move. Also included are descriptions of experiments using a CIMCORP XR6100 gantry robot and results from these experiments. Finally, sources of error resulting in small residual oscillations are identified and possible solutions presented

Preliminary site description Forsmark area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Skagius, Kristina [ed.

2005-06-01

The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

Preliminary site description Forsmark area - version 1.2

International Nuclear Information System (INIS)

Skagius, Kristina

2005-06-01

The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

Object-oriented biomedical system modelling--the language.

Science.gov (United States)

Hakman, M; Groth, T

1999-11-01

The paper describes a new object-oriented biomedical continuous system modelling language (OOBSML). It is fully object-oriented and supports model inheritance, encapsulation, and model component instantiation and behaviour polymorphism. Besides the traditional differential and algebraic equation expressions the language includes also formal expressions for documenting models and defining model quantity types and quantity units. It supports explicit definition of model input-, output- and state quantities, model components and component connections. The OOBSML model compiler produces self-contained, independent, executable model components that can be instantiated and used within other OOBSML models and/or stored within model and model component libraries. In this way complex models can be structured as multilevel, multi-component model hierarchies. Technically the model components produced by the OOBSML compiler are executable computer code objects based on distributed object and object request broker technology. This paper includes both the language tutorial and the formal language syntax and semantic description.

State-of-the-art Versus Time-triggered Object Tracking in Advanced Driver Assistance Systems

Directory of Open Access Journals (Sweden)

Moritz Koplin

2013-04-01

Full Text Available Most state-of-the-art driver assistance systems cannot guarantee that real-time images of object states are updated within a given time interval, because the object state observations are typically sampled by uncontrolled sensors and transmitted via an indeterministic bus system such as CAN. To overcome this shortcoming, a paradigm shift toward time-triggered advanced driver assistance systems based on a deterministic bus system, such as FlexRay, is under discussion. In order to prove the feasibility of this paradigm shift, this paper develops different models of a state-of-the-art and a time-triggered advanced driver assistance system based on multi-sensor object tracking and compares them with regard to their mean performance. The results show that while the state-of-the-art model is advantageous in scenarios with low process noise, it is outmatched by the time-triggered model in the case of high process noise, i.e., in complex situations with high dynamic.

State-Ademe contracts on objectives and performance 2016-2019. Synthesis

International Nuclear Information System (INIS)

2016-04-01

This publication indicates the main strategic orientations of the ADEME from 2016 to 2019 as they have been defined in contracts between the French State and this public agency. It indicates how this agency promotes and supports innovation and prepares the future of the ecological and energy transition, and how it contributes to the collective expertise for an ecological and energy transition. It also presents operational objectives by distinguishing transverse, thematic (energy, climate change and air quality, circular economy) and support (governance, budgetary, financial and logistic management) objectives

Prevalence of onchocerciasis in Edo State, Nigeria | Onowhakpor ...

African Journals Online (AJOL)

Objective: To determine the prevalence of onchocerciasis in endemic areas in Edo State,Nigeria. Methodology: A descriptive cross-sectional study was conducted among 658 respondents residing in onchocerciasis endemic areas of Edo State using a pre-tested interviewers' administered questionnaire and examination of ...

Static Object Detection Based on a Dual Background Model and a Finite-State Machine

Directory of Open Access Journals (Sweden)

Heras Evangelio Rubén

2011-01-01

Full Text Available Detecting static objects in video sequences has a high relevance in many surveillance applications, such as the detection of abandoned objects in public areas. In this paper, we present a system for the detection of static objects in crowded scenes. Based on the detection of two background models learning at different rates, pixels are classified with the help of a finite-state machine. The background is modelled by two mixtures of Gaussians with identical parameters except for the learning rate. The state machine provides the meaning for the interpretation of the results obtained from background subtraction; it can be implemented as a look-up table with negligible computational cost and it can be easily extended. Due to the definition of the states in the state machine, the system can be used either full automatically or interactively, making it extremely suitable for real-life surveillance applications. The system was successfully validated with several public datasets.

Matrix product state description of Halperin states

Science.gov (United States)

Crépel, V.; Estienne, B.; Bernevig, B. A.; Lecheminant, P.; Regnault, N.

2018-04-01

Many fractional quantum Hall states can be expressed as a correlator of a given conformal field theory used to describe their edge physics. As a consequence, these states admit an economical representation as an exact matrix product state (MPS) that was extensively studied for the systems without any spin or any other internal degrees of freedom. In that case, the correlators are built from a single electronic operator, which is primary with respect to the underlying conformal field theory. We generalize this construction to the archetype of Abelian multicomponent fractional quantum Hall wave functions, the Halperin states. These can be written as conformal blocks involving multiple electronic operators and we explicitly derive their exact MPS representation. In particular, we deal with the caveat of the full wave-function symmetry and show that any additional SU(2) symmetry is preserved by the natural MPS truncation scheme provided by the conformal dimension. We use our method to characterize the topological order of the Halperin states by extracting the topological entanglement entropy. We also evaluate their bulk correlation lengths, which are compared to plasma analogy arguments.

Paths and partitions: Combinatorial descriptions of the parafermionic states

Science.gov (United States)

Mathieu, Pierre

2009-09-01

The Zk parafermionic conformal field theories, despite the relative complexity of their modes algebra, offer the simplest context for the study of the bases of states and their different combinatorial representations. Three bases are known. The classic one is given by strings of the fundamental parafermionic operators whose sequences of modes are in correspondence with restricted partitions with parts at distance k -1 differing at least by 2. Another basis is expressed in terms of the ordered modes of the k -1 different parafermionic fields, which are in correspondence with the so-called multiple partitions. Both types of partitions have a natural (Bressoud) path representation. Finally, a third basis, formulated in terms of different paths, is inherited from the solution of the restricted solid-on-solid model of Andrews-Baxter-Forrester. The aim of this work is to review, in a unified and pedagogical exposition, these four different combinatorial representations of the states of the Zk parafermionic models. The first part of this article presents the different paths and partitions and their bijective relations; it is purely combinatorial, self-contained, and elementary; it can be read independently of the conformal-field-theory applications. The second part links this combinatorial analysis with the bases of states of the Zk parafermionic theories. With the prototypical example of the parafermionic models worked out in detail, this analysis contributes to fix some foundations for the combinatorial study of more complicated theories. Indeed, as we briefly indicate in ending, generalized versions of both the Bressoud and the Andrews-Baxter-Forrester paths emerge naturally in the description of the minimal models.

40 CFR 233.11 - Program description.

Science.gov (United States)

2010-07-01

... organization and structure of the State agency (agencies) which will have responsibility for administering the... under § 233.10 shall include: (a) A description of the scope and structure of the State's program. The... will coordinate its enforcement strategy with that of the Corps and EPA; (h) A description of the...

A coarse grained description of time evolution: Irreversible state reduction and time-energy relation

International Nuclear Information System (INIS)

Bonifacio, R.; Milan Univ.

1983-05-01

We show that a proper coarse-grained description of time evolution leads to a finite difference equation with step tau for the density operator. This implies state reduction to the diagonal form in the energy representation and a quasi ergodic behaviour of quantum mechanical ensemble averages. An intrinsic time-energy relation tauΔE>=(h/2π)/2 is proposed, and its equivalence to a time quantization is discussed. (author)

Investigating Music Information Objects

Science.gov (United States)

Weissenberger, Lynnsey K.

2016-01-01

This dissertation, titled "Investigating Music Information Objects," is a study of the nature, description, representations, and ideas related to music information objects (MIOs). This research study investigates how music practitioners from various traditions describe and conceptualize MIOs, using a theoretical framework to classify…

RISK AS AN OBJECT OF STATE REGULATION

Directory of Open Access Journals (Sweden)

Perfilyev A. A.

2016-09-01

Full Text Available The purpose of this article is to consider the possible mechanism of enterprise risk management from macroeconomic perspective. The need for investment risk management from the standpoint of the economy as a whole is determined by the following circumstances. Financial market conditions affecting the investment decisions of companies raises the financial markets in the category of the main sources of investment resources. This creates a state's interest in the effect on these sources, but it doesn't have effective ways to influence the investors’ decisions. Transition of regulator from influencing the cash flows to the regulation of investment activity creates a new paradigm for the financial management of the economy, which is based on a well-known fact that in the global economy the demand for goods and services is presented as a demand, mediated by investment decisions. The motives and mechanisms of investment decisions in a closed economy are well described by modern financial theory. In financial theory a mechanism of financial risk management is developed primarily from the standpoint of an investor, ignoring the problem in a broader context - within whole financial market of a country. Expanding the area of investment decisions international financial markets generate a need for new approaches to study of investment risks of corporations, which in this field are connected with country risk and should be considered as an object of state regulation. An analysis of fundamentals of the financial theory about the behavior of the investor, the state and the role of global financial markets in the choice of investors reveals that investment motives of corporations and mechanisms of regulators' influence on the cash flow are loosely bound in the matter of the volume of investments, which ones agree to implement, while others expect to receive. In our view, there is a need for a mechanism allowing the state to influence the investment decisions

The Description of Health Among Iraqi Refugee Women in the United States.

Science.gov (United States)

Salman, Khlood F; Resick, Lenore K

2015-08-01

The purpose of this study was to understand the description of health among Iraqi women refugees, their health status, and health experiences during resettlement in the United States. Twelve women, ages 21-67 years old, who resettled in the United States during or after 2003 where interviewed. The women described health as a gift determined by God, the ability to function, the absence of physical symptoms, and the need to feel safe and secure in the context of resettlement. Although the Iraqi women valued health, during the resettlement process, seeking safety and feeling secure were the foremost priorities. Findings revealed that this is a vulnerable population which has experienced the violence of war and, as a result, have unique physical, mental, economic, and social concerns related to health. Implications are for a multidisciplinary approach to best meet the unique individual health needs of this vulnerable population.

Dynamic information processing states revealed through neurocognitive models of object semantics

Science.gov (United States)

Clarke, Alex

2015-01-01

Recognising objects relies on highly dynamic, interactive brain networks to process multiple aspects of object information. To fully understand how different forms of information about objects are represented and processed in the brain requires a neurocognitive account of visual object recognition that combines a detailed cognitive model of semantic knowledge with a neurobiological model of visual object processing. Here we ask how specific cognitive factors are instantiated in our mental processes and how they dynamically evolve over time. We suggest that coarse semantic information, based on generic shared semantic knowledge, is rapidly extracted from visual inputs and is sufficient to drive rapid category decisions. Subsequent recurrent neural activity between the anterior temporal lobe and posterior fusiform supports the formation of object-specific semantic representations – a conjunctive process primarily driven by the perirhinal cortex. These object-specific representations require the integration of shared and distinguishing object properties and support the unique recognition of objects. We conclude that a valuable way of understanding the cognitive activity of the brain is though testing the relationship between specific cognitive measures and dynamic neural activity. This kind of approach allows us to move towards uncovering the information processing states of the brain and how they evolve over time. PMID:25745632

The Visual Object Tracking VOT2016 Challenge Results

KAUST Repository

Kristan, Matej

2016-11-02

The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment. The dataset, the evaluation kit as well as the results are publicly available at the challenge website (http://votchallenge.net).

The Visual Object Tracking VOT2016 Challenge Results

KAUST Repository

Kristan, Matej; Leonardis, Aleš; Matas, Jiři; Felsberg, Michael; Pflugfelder, Roman; Čehovin, Luka; Vojí r̃, Tomá š; Hä ger, Gustav; Lukežič, Alan; Ferná ndez, Gustavo; Gupta, Abhinav; Petrosino, Alfredo; Memarmoghadam, Alireza; Garcia-Martin, Alvaro; Solí s Montero, André s; Vedaldi, Andrea; Robinson, Andreas; Ma, Andy J.; Varfolomieiev, Anton; Alatan, Aydin; Erdem, Aykut; Ghanem, Bernard; Liu, Bin; Han, Bohyung; Martinez, Brais; Chang, Chang-Ming; Xu, Changsheng; Sun, Chong; Kim, Daijin; Chen, Dapeng; Du, Dawei; Mishra, Deepak; Yeung, Dit-Yan; Gundogdu, Erhan; Erdem, Erkut; Khan, Fahad; Porikli, Fatih; Zhao, Fei; Bunyak, Filiz; Battistone, Francesco; Zhu, Gao; Roffo, Giorgio; Subrahmanyam, Gorthi R. K. Sai; Bastos, Guilherme; Seetharaman, Guna; Medeiros, Henry; Li, Hongdong; Qi, Honggang; Bischof, Horst; Possegger, Horst; Lu, Huchuan; Lee, Hyemin; Nam, Hyeonseob; Chang, Hyung Jin; Drummond, Isabela; Valmadre, Jack; Jeong, Jae-chan; Cho, Jae-il; Lee, Jae-Yeong; Zhu, Jianke; Feng, Jiayi; Gao, Jin; Choi, Jin Young; Xiao, Jingjing; Kim, Ji-Wan; Jeong, Jiyeoup; Henriques, Joã o F.; Lang, Jochen; Choi, Jongwon; Martinez, Jose M.; Xing, Junliang; Gao, Junyu; Palaniappan, Kannappan; Lebeda, Karel; Gao, Ke; Mikolajczyk, Krystian; Qin, Lei; Wang, Lijun; Wen, Longyin; Bertinetto, Luca; Rapuru, Madan Kumar; Poostchi, Mahdieh; Maresca, Mario; Danelljan, Martin; Mueller, Matthias; Zhang, Mengdan; Arens, Michael; Valstar, Michel; Tang, Ming; Baek, Mooyeol; Khan, Muhammad Haris; Wang, Naiyan; Fan, Nana; Al-Shakarji, Noor; Miksik, Ondrej; Akin, Osman; Moallem, Payman; Senna, Pedro; Torr, Philip H. S.; Yuen, Pong C.; Huang, Qingming; Martin-Nieto, Rafael; Pelapur, Rengarajan; Bowden, Richard; Laganiè re, Robert; Stolkin, Rustam; Walsh, Ryan; Krah, Sebastian B.; Li, Shengkun; Zhang, Shengping; Yao, Shizeng; Hadfield, Simon; Melzi, Simone; Lyu, Siwei; Li, Siyi; Becker, Stefan; Golodetz, Stuart; Kakanuru, Sumithra; Choi, Sunglok; Hu, Tao; Mauthner, Thomas; Zhang, Tianzhu; Pridmore, Tony; Santopietro, Vincenzo; Hu, Weiming; Li, Wenbo; Hü bner, Wolfgang; Lan, Xiangyuan; Wang, Xiaomeng; Li, Xin; Li, Yang; Demiris, Yiannis; Wang, Yifan; Qi, Yuankai; Yuan, Zejian; Cai, Zexiong; Xu, Zhan; He, Zhenyu; Chi, Zhizhen

2016-01-01

The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment. The dataset, the evaluation kit as well as the results are publicly available at the challenge website (http://votchallenge.net).

Object grammars and random generation

Directory of Open Access Journals (Sweden)

I. Dutour

1998-12-01

Full Text Available This paper presents a new systematic approach for the uniform random generation of combinatorial objects. The method is based on the notion of object grammars which give recursive descriptions of objects and generalize context-freegrammars. The application of particular valuations to these grammars leads to enumeration and random generation of objects according to non algebraic parameters.

XML as a format of expression of Object-Oriented Petri Nets

Directory of Open Access Journals (Sweden)

Petr Jedlička

2004-01-01

Full Text Available A number of object-oriented (OO variants have so far been devised for Petri Nets (PN. However, none of these variants has ever been described using an open, independent format – such as XML. This article suggests several possibilities and advantages of such a description. The outlined XML language definition for the description of object-oriented Petri Nets (OOPN is based on XMI (description of UML object-oriented models, SOX (simple description of general OO systems and PNML (an XML-based language used for the description of structured and modular PN. For OOPN, the XML form of description represents a standard format for storing as well as for transfer between various OOPN-processing (analysis, simulation, ... tools.

Problem of identifying an object in a robotics scene from an imprecise verbal description

Energy Technology Data Exchange (ETDEWEB)

Farreny, H; Prade, H

1983-01-01

The authors investigate the problem of relating imprecise and incomplete verbal descriptions to noisy high-level features supplied by an image analyzer. Pattern-matching problems are specially addressed. The proposed approach allows the direct processing of human-like descriptions. Moreover, the imprecision due to the use of natural language expressions or to the noisiness of the image analyzer, is taken into account. 26 references.

Objective classification of latent behavioral states in bio-logging data using multivariate-normal hidden Markov models.

Science.gov (United States)

Phillips, Joe Scutt; Patterson, Toby A; Leroy, Bruno; Pilling, Graham M; Nicol, Simon J

2015-07-01

Analysis of complex time-series data from ecological system study requires quantitative tools for objective description and classification. These tools must take into account largely ignored problems of bias in manual classification, autocorrelation, and noise. Here we describe a method using existing estimation techniques for multivariate-normal hidden Markov models (HMMs) to develop such a classification. We use high-resolution behavioral data from bio-loggers attached to free-roaming pelagic tuna as an example. Observed patterns are assumed to be generated by an unseen Markov process that switches between several multivariate-normal distributions. Our approach is assessed in two parts. The first uses simulation experiments, from which the ability of the HMM to estimate known parameter values is examined using artificial time series of data consistent with hypotheses about pelagic predator foraging ecology. The second is the application to time series of continuous vertical movement data from yellowfin and bigeye tuna taken from tuna tagging experiments. These data were compressed into summary metrics capturing the variation of patterns in diving behavior and formed into a multivariate time series used to estimate a HMM. Each observation was associated with covariate information incorporating the effect of day and night on behavioral switching. Known parameter values were well recovered by the HMMs in our simulation experiments, resulting in mean correct classification rates of 90-97%, although some variance-covariance parameters were estimated less accurately. HMMs with two distinct behavioral states were selected for every time series of real tuna data, predicting a shallow warm state, which was similar across all individuals, and a deep colder state, which was more variable. Marked diurnal behavioral switching was predicted, consistent with many previous empirical studies on tuna. HMMs provide easily interpretable models for the objective classification of

Web of Objects Based Ambient Assisted Living Framework for Emergency Psychiatric State Prediction

Science.gov (United States)

Alam, Md Golam Rabiul; Abedin, Sarder Fakhrul; Al Ameen, Moshaddique; Hong, Choong Seon

2016-01-01

Ambient assisted living can facilitate optimum health and wellness by aiding physical, mental and social well-being. In this paper, patients’ psychiatric symptoms are collected through lightweight biosensors and web-based psychiatric screening scales in a smart home environment and then analyzed through machine learning algorithms to provide ambient intelligence in a psychiatric emergency. The psychiatric states are modeled through a Hidden Markov Model (HMM), and the model parameters are estimated using a Viterbi path counting and scalable Stochastic Variational Inference (SVI)-based training algorithm. The most likely psychiatric state sequence of the corresponding observation sequence is determined, and an emergency psychiatric state is predicted through the proposed algorithm. Moreover, to enable personalized psychiatric emergency care, a service a web of objects-based framework is proposed for a smart-home environment. In this framework, the biosensor observations and the psychiatric rating scales are objectified and virtualized in the web space. Then, the web of objects of sensor observations and psychiatric rating scores are used to assess the dweller’s mental health status and to predict an emergency psychiatric state. The proposed psychiatric state prediction algorithm reported 83.03 percent prediction accuracy in an empirical performance study. PMID:27608023

31 CFR 601.2 - Description of paper.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Description of paper. 601.2 Section... ENGRAVING AND PRINTING, DEPARTMENT OF THE TREASURY DISTINCTIVE PAPER FOR UNITED STATES CURRENCY AND OTHER SECURITIES § 601.2 Description of paper. The paper utilized in the printing of United States currency and...

7 CFR 2903.7 - Project objectives.

Science.gov (United States)

2010-01-01

... AGRICULTURE BIODIESEL FUEL EDUCATION PROGRAM Program Description § 2903.7 Project objectives. (a) Successful... 7 Agriculture 15 2010-01-01 2010-01-01 false Project objectives. 2903.7 Section 2903.7 Agriculture... following objectives: (1) Enhance current efforts to collect and disseminate biodiesel information; (2...

Flood risk management in Flanders: from flood risk objectives to appropriate measures through state assessment

Directory of Open Access Journals (Sweden)

Verbeke Sven

2016-01-01

Full Text Available In compliance with the EU Flood Directive to reduce flood risk, flood risk management objectives are indispensable for the delineation of necessary measures. In Flanders, flood risk management objectives are part of the environmental objectives which are judicially integrated by the Decree on Integrated Water Policy. Appropriate objectives were derived by supporting studies and extensive consultation on a local, regional and policy level. Under a general flood risk objective sub-objectives are formulated for different aspects: water management and safety, shipping, ecology, and water supply. By developing a risk matrix, it is possible to assess the current state of flood risk and to judge where action is needed to decrease the risk. Three different states of flood risk are distinguished: a acceptable risk, where no action is needed, b intermediate risk where the risk should be reduced by cost efficient actions, and c unacceptable risk, where action is necessary. For each particular aspect, the severity of the consequences of flooding is assessed by quantifiable indicators, such as economic risk, people at risk and ecological flood tolerance. The framework also allows evaluating the effects of the implemented measures and the autonomous development such as climate change and land use change. This approach gives a quantifiable assessment of state, and enables a prioritization of flood risk measures for the reduction of flood risk in a cost efficient and sustainable way.

Predicting biological system objectives de novo from internal state measurements

Directory of Open Access Journals (Sweden)

Maranas Costas D

2008-01-01

Full Text Available Abstract Background Optimization theory has been applied to complex biological systems to interrogate network properties and develop and refine metabolic engineering strategies. For example, methods are emerging to engineer cells to optimally produce byproducts of commercial value, such as bioethanol, as well as molecular compounds for disease therapy. Flux balance analysis (FBA is an optimization framework that aids in this interrogation by generating predictions of optimal flux distributions in cellular networks. Critical features of FBA are the definition of a biologically relevant objective function (e.g., maximizing the rate of synthesis of biomass, a unit of measurement of cellular growth and the subsequent application of linear programming (LP to identify fluxes through a reaction network. Despite the success of FBA, a central remaining challenge is the definition of a network objective with biological meaning. Results We present a novel method called Biological Objective Solution Search (BOSS for the inference of an objective function of a biological system from its underlying network stoichiometry as well as experimentally-measured state variables. Specifically, BOSS identifies a system objective by defining a putative stoichiometric "objective reaction," adding this reaction to the existing set of stoichiometric constraints arising from known interactions within a network, and maximizing the putative objective reaction via LP, all the while minimizing the difference between the resultant in silico flux distribution and available experimental (e.g., isotopomer flux data. This new approach allows for discovery of objectives with previously unknown stoichiometry, thus extending the biological relevance from earlier methods. We verify our approach on the well-characterized central metabolic network of Saccharomyces cerevisiae. Conclusion We illustrate how BOSS offers insight into the functional organization of biochemical networks

Advisory processes and their descriptive data

Directory of Open Access Journals (Sweden)

Milan Mišovič

2005-01-01

Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

Dual descriptions of supersymmetry breaking

International Nuclear Information System (INIS)

Intrilligator, K.; Thomas, S.

1996-08-01

Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

Kinetic and spectral descriptions of autoionization phenomena associated with atomic processes in plasmas

Science.gov (United States)

Jacobs, Verne L.

2017-06-01

This investigation has been devoted to the theoretical description and computer modeling of atomic processes giving rise to radiative emission in energetic electron and ion beam interactions and in laboratory plasmas. We are also interested in the effects of directed electron and ion collisions and of anisotropic electric and magnetic fields. In the kinetic-theory description, we treat excitation, de-excitation, ionization, and recombination in electron and ion encounters with partially ionized atomic systems, including the indirect contributions from processes involving autoionizing resonances. These fundamental collisional and electromagnetic interactions also provide particle and photon transport mechanisms. From the spectral perspective, the analysis of atomic radiative emission can reveal detailed information on the physical properties in the plasma environment, such as non-equilibrium electron and charge-state distributions as well as electric and magnetic field distributions. In this investigation, a reduced-density-matrix formulation is developed for the microscopic description of atomic electromagnetic interactions in the presence of environmental (collisional and radiative) relaxation and decoherence processes. Our central objective is a fundamental microscopic description of atomic electromagnetic processes, in which both bound-state and autoionization-resonance phenomena can be treated in a unified and self-consistent manner. The time-domain (equation-of-motion) and frequency-domain (resolvent-operator) formulations of the reduced-density-matrix approach are developed in a unified and self-consistent manner. This is necessary for our ultimate goal of a systematic and self-consistent treatment of non-equilibrium (possibly coherent) atomic-state kinetics and high-resolution (possibly overlapping) spectral-line shapes. We thereby propose the introduction of a generalized collisional-radiative atomic-state kinetics model based on a reduced

The structured-objective rorschach test (sort occupational profile for state accountants

Directory of Open Access Journals (Sweden)

J. J. Gouws

1996-06-01

Full Text Available The objective of this study was to provide an occupational profile of performance on the Structured-Objective Rorschach Test (SORT by state accountants for use in guidance, election and placement of personnel. The sample comprised accountants and auditors from the financial sections in various state institutions who were selected for the Senior Financial Management Course at the University of Stellenbosch. As all participants were considered successful in their occupation and no significant differences were found between the profiles of various age and year groups, the SORT profile obtained for the total group can be used as a predictor to determine and evaluate the personality traits that are important in the profession of state accountant. Opsomming Die doel van hierdie studie was die daarstelling van 'n beroepsprofiel van staatsrekenmeesters se prestasie op die Gestruktureerd-Objektiewe Rorschachtoets (SORT wat vir voorligting/ keuring en plasing van personeel gebruik kan word. Die steekproef is saamgestel uit rekenmeesters en ouditeure van die finansiele afdelings in verskeie staatsinstansies wat geselekteer is vir die Senior Finansiele Bestuurskursus by die Universiteit van Stellenbosch. Aangesien alle deelnemers as suksesvol in hulle beroep beskou is en geen beduidende verskille in die profiele van verskillende ouderdomsgroepe en jaargroepe gevind is nie, kan die SORT profiel van die totale groep as 'n voorspeller gebruik word vir die bepaling en evaluering van die persoonlikheidseienskappe wat belangrik is in die beroep van staatsrekenmeester.

NONLINEAR MODELS FOR DESCRIPTION OF CACAO FRUIT GROWTH WITH ASSUMPTION VIOLATIONS

Directory of Open Access Journals (Sweden)

JOEL AUGUSTO MUNIZ

2017-01-01

Full Text Available Cacao (Theobroma cacao L. is an important fruit in the Brazilian economy, which is mainly cultivated in the southern State of Bahia. The optimal stage for harvesting is a major factor for fruit quality and the knowledge on its growth curves can help, especially in identifying the ideal maturation stage for harvesting. Nonlinear regression models have been widely used for description of growth curves. However, several studies in this subject do not consider the residual analysis, the existence of a possible dependence between longitudinal observations, or the sample variance heterogeneity, compromising the modeling quality. The objective of this work was to compare the fit of nonlinear regression models, considering residual analysis and assumption violations, in the description of the cacao (clone Sial-105 fruit growth. The data evaluated were extracted from Brito and Silva (1983, who conducted the experiment in the Cacao Research Center, Ilheus, State of Bahia. The variables fruit length, diameter and volume as a function of fruit age were studied. The use of weighting and incorporation of residual dependencies was efficient, since the modeling became more consistent, improving the model fit. Considering the first-order autoregressive structure, when needed, leads to significant reduction in the residual standard deviation, making the estimates more reliable. The Logistic model was the most efficient for the description of the cacao fruit growth.

Description and comparison of pharmacy technician training programs in the United States.

Science.gov (United States)

Anderson, Douglas C; Draime, Juanita A; Anderson, Timothy S

2016-01-01

To describe pharmacy technician training programs in the United States and to compare pharmacy technician program characteristics between programs with and without a pharmacist on faculty and between programs with different accreditation status. Descriptive, cross-sectional study. Not applicable. United States pharmacy technician programs. Not applicable. Student class size, faculty credentials, coursework components, program length, tuition rates, and admission criteria. Currently, there are more than 698 pharmacy technician programs across 1114 campuses, with complete data available for 216 programs. Programs varied widely in terms of class sizes, faculty credentials, and admission criteria. Programs with pharmacists on faculty were significantly less expensive than were those without pharmacists (P = 0.009). Accreditation had no impact on tuition prices. This is the first study of its kind to describe and characterize pharmacy technician training programs. There is relatively little control of technician training by the profession of pharmacy. The quality of these programs in terms of student outcomes is unknown, and it should be explored. Rigorous debate and discussion is needed regarding the future of pharmacy technician roles and the training required for those roles. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Description of occupant behaviour in building energy simulation: state-of-art and concepts for improvements

DEFF Research Database (Denmark)

Fabi, Valentina; Andersen, Rune Vinther; Corgnati, Stefano Paolo

2011-01-01

of basic assumptions that affect the results. Therefore, the calculated energy performance may differ significantly from the real energy consumption. One of the key reasons is the current inability to properly model occupant behaviour and to quantify the associated uncertainties in building performance...... predictions. By consequence, a better description of parameters related to occupant behaviour is highly required. In this paper, the state of art in occupant behaviour modelling within energy simulation tools is analysed and some concepts related to possible improvements of simulation tools are proposed...

Qualitative Description and Quantitative Optimization of Tactical Reconnaissance Agents System Organization

Directory of Open Access Journals (Sweden)

Xiong Li

2012-08-01

Full Text Available In this paper, the problem of qualitative description and quantitative optimization for tactical reconnaissance agents system organization is considered with objective of higher teamwork efficiency and more reasonable task balancing strategies. By analyzing tactical reconnaissance system and its environment, task-(role-entity agent mapping mechanism and agents in system organization, the system framework is qualitatively described. By transforming the system into an interaction task request-service mechanism queuing system, a Markov chain of system state transition is obtained, since its state transition process in interaction is Markov process and accords with real tactical reconnaissance behaviors. By solving the state transition equations, the inherent relationship of tactical reconnaissance agents is found and the optimized system configuration is obtained. The established simulation demonstration system proves that the proposed approach and model are feasible and effective.

Model-based object classification using unification grammars and abstract representations

Science.gov (United States)

Liburdy, Kathleen A.; Schalkoff, Robert J.

1993-04-01

The design and implementation of a high level computer vision system which performs object classification is described. General object labelling and functional analysis require models of classes which display a wide range of geometric variations. A large representational gap exists between abstract criteria such as `graspable' and current geometric image descriptions. The vision system developed and described in this work addresses this problem and implements solutions based on a fusion of semantics, unification, and formal language theory. Object models are represented using unification grammars, which provide a framework for the integration of structure and semantics. A methodology for the derivation of symbolic image descriptions capable of interacting with the grammar-based models is described and implemented. A unification-based parser developed for this system achieves object classification by determining if the symbolic image description can be unified with the abstract criteria of an object model. Future research directions are indicated.

Entering Freshman Transfer and Career Students: A Comparison of Selected Educational Objectives with Recommendations for Transfer and Academic Advisement.

Science.gov (United States)

Padula, Mary S.

The descriptive study investigated the extent to which entering freshman students and transfer students at Borough of Manhattan Community College (BMCC) are enrolled in degree programs that are compatible with their stated educational objectives, transfer intents, and degree intents. Subjects (N=376) enrolled in a mandatory orientation course were…

Perceiving the target's state or state provoked by the target? An analysis of the descriptive and evaluative knowledge in person perception.

Science.gov (United States)

Mignon, Astrid; Mollaret, Patrick

2012-12-01

In line with the theory of traits as generalized affordances, the present article argues that target's states (TSs) and states provoked by a target (other's states (OSs) towards target) are two components of the meaning of traits referring, respectively, to a descriptive and to an evaluative knowledge of people. A preliminary study confirmed that TS and OS were equally representative of a trait. Two studies were designed to study the effects of practising the use of traits as either TS or OS categories (an induction procedure) on a subsequent person perception task, requiring participants to rate photographed targets on a series of traits. Results show that both the differentiation between targets and evaluative consistency of ratings were enhanced under the OS condition compared to TS and control (with no practice of traits) conditions. Importantly, Study 2 tends to show that the effects of the induction procedure are not limited to the practised traits but also generalize to unpractised traits. Implications of these findings for social perception research are discussed. ©2011 The British Psychological Society.

34 CFR 364.42 - What objectives and information must be included in the State plan?

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What objectives and information must be included in the State plan? 364.42 Section 364.42 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION STATE...

Engineering Ethics Education : Its Necessity, Objectives, Methods, Current State, and Challenges

Science.gov (United States)

Fudano, Jun

The importance of engineering ethics education has become widely recognized in the industrialized countries including Japan. This paper examines the background against which engineering ethics education is required, and reviews its objectives, methods, and challenges, as well as its current state. In pointing out important issues associated with the apparent acceptance and quantitative development of ethics education, especially after the establishment of the Japan Accreditation Board for Engineering Education in 1999, the author stresses that the most serious problem is the lack of common understanding on the objectives of engineering ethics education. As a strategy to improve the situation, the so-called “Ethics-across-the-Curriculum” approach is introduced. The author also claims that business/organization ethics which is consistent with engineering ethics should be promoted in Japan.

Quantum objective realism

International Nuclear Information System (INIS)

Bednorz, Adam

2015-01-01

The question of whether quantum measurements reflect some underlying objective reality has no generally accepted answer. We show that a description of such reality is possible under natural conditions such as linearity and causality, although in terms of moments and cumulants of finite order and without relativistic invariance. The proposed construction of observations’ probability distribution originates from weak, noninvasive measurements, with detection error replaced by some external finite noise. The noise allows us to construct microscopic objective reality, but remains dynamically decoupled and hence unobservable at the macroscopic level. (paper)

Radiochemical Facility Laboratory (RFL). Description of the installation and reprogramming of its objectives

International Nuclear Information System (INIS)

Bonini, Alberto; Dominguez, C.; Dell'Occhio, Leonor A.; Stankevicius, Alejandro

1999-01-01

A description is made of a laboratory that will be used to characterize radioactive wastes, to study the burnup of fuel elements, to make isotopic analysis by mass spectroscopy and to recover fissile materials from the production of fission 99 Mo. The equipment and the ventilation system are also described. (author)

Inheritance conditions for object life cycle diagrams

NARCIS (Netherlands)

Lipeck, U.W.; Saake, Gunter; Hartel, Peter; Vossen, G.; Jungclaus, Ralf; Wieringa, Roelf J.; Feenstra, Remco

Inheritance is the main principle in object-oriented design methods to support structuring and reuse of object behaviour descriptions. Most proposals restrict the formal use of inheritance to method interfaces and method effect specifcations. We propose to extend the inheritance relation to cover

Invariant Hough Random Ferns for Object Detection and Tracking

Directory of Open Access Journals (Sweden)

Yimin Lin

2014-01-01

Full Text Available This paper introduces an invariant Hough random ferns (IHRF incorporating rotation and scale invariance into the local feature description, random ferns classifier training, and Hough voting stages. It is especially suited for object detection under changes in object appearance and scale, partial occlusions, and pose variations. The efficacy of this approach is validated through experiments on a large set of challenging benchmark datasets, and the results demonstrate that the proposed method outperforms state-of-the-art conventional methods such as bounding-box-based and part-based methods. Additionally, we also propose an efficient clustering scheme based on the local patches’ appearance and their geometric relations that can provide pixel-accurate, top-down segmentations from IHRF back-projections. This refined segmentation can be used to improve the quality of online object tracking because it avoids the drifting problem. Thus, an online tracking framework based on IHRF, which is trained and updated in each frame to distinguish and segment the object from the background, is established. Finally, the experimental results on both object segmentation and long-term object tracking show that this method yields accurate and robust tracking performance in a variety of complex scenarios, especially in cases of severe occlusions and nonrigid deformations.

Adobe Boxes: Locating Object Proposals Using Object Adobes.

Science.gov (United States)

Fang, Zhiwen; Cao, Zhiguo; Xiao, Yang; Zhu, Lei; Yuan, Junsong

2016-09-01

Despite the previous efforts of object proposals, the detection rates of the existing approaches are still not satisfactory enough. To address this, we propose Adobe Boxes to efficiently locate the potential objects with fewer proposals, in terms of searching the object adobes that are the salient object parts easy to be perceived. Because of the visual difference between the object and its surroundings, an object adobe obtained from the local region has a high probability to be a part of an object, which is capable of depicting the locative information of the proto-object. Our approach comprises of three main procedures. First, the coarse object proposals are acquired by employing randomly sampled windows. Then, based on local-contrast analysis, the object adobes are identified within the enlarged bounding boxes that correspond to the coarse proposals. The final object proposals are obtained by converging the bounding boxes to tightly surround the object adobes. Meanwhile, our object adobes can also refine the detection rate of most state-of-the-art methods as a refinement approach. The extensive experiments on four challenging datasets (PASCAL VOC2007, VOC2010, VOC2012, and ILSVRC2014) demonstrate that the detection rate of our approach generally outperforms the state-of-the-art methods, especially with relatively small number of proposals. The average time consumed on one image is about 48 ms, which nearly meets the real-time requirement.

30 CFR 250.235 - If a State objects to the EP's coastal zone consistency certification, what can I do?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false If a State objects to the EP's coastal zone... EP's coastal zone consistency certification, what can I do? If an affected State objects to the coastal zone consistency certification accompanying your proposed EP within the timeframe prescribed in...

Spacetime quantum probabilities II: Relativized descriptions and Popperian propensities

Science.gov (United States)

Mugur-Schächter, M.

1992-02-01

In the first part of this work(1) we have explicated the spacetime structure of the probabilistic organization of quantum mechanics. We have shown that each quantum mechanical state, in consequence of the spacetime characteristics of the epistemic operations by which the observer produces the state to be studied and the processes of qualification of these, brings in a tree-like spacetime structure, a “quantum mechanical probability tree,” that transgresses the theory of probabilities as it now stands. In this second part we develop the general implications of these results. Starting from the lowest level of cognitive action and creating an appropriate symbolism, we construct a “relativizing epistemic syntax,” a “general method of relativized conceptualization” where—systematically—each description is explicitly referred to the epistemic operations by which the observer produces the entity to be described and obtains qualifications of it. The method generates a typology of increasingly complex relativized descriptions where the question of realism admits of a particularly clear pronouncement. Inside this typology the epistemic processes that lie—UNIVERSALLY—at the basis of any conceptualization, reveal a tree-like spacetime structure. It appears in particular that the spacetime structure of the relativized representation of a probabilistic description, which transgresses the nowadays theory of probabilities, is the general mould of which the quantum mechanical probability trees are only particular realizations. This entails a clear definition of the descriptional status of quantum mechanics. While the recognition of the universal cognitive content of the quantum mechanical formalism opens up vistas toward mathematical developments of the relativizing epistemic syntax. The relativized representation of a probabilistic description leads with inner necessity to a “morphic” interpretation of probabilities that can be regarded as a formalized and

[Female homicide victims in Recife, Pernambuco State, Brazil, 2009-2010: a descriptive study].

Science.gov (United States)

Silva, Maria Arleide da; Cabral Filho, José Eulálio; Amorim, Melania Maria Ramos; Falbo Neto, Gilliatt Hanois

2013-02-01

This study investigated the epidemiological profile of female homicide victims in Recife, Pernambuco State, Northeast Brazil. An observational descriptive and prospective study included all homicides from March 2009 to February 2010 with female victims from Recife, 10 to 49 years of age. A questionnaire was used to record socioeconomic, demographic, and biological risk factors. Relatives of the victims were interviewed, and data were collected from death certificates. We identified 60 homicides during the study period. Most victims were adult women with brown skin color and low schooling and low income. Other characteristics included smoking in 39.7%, alcohol and illicit drugs in 48.3% and 24.1%, respectively, and physical and/or sexual violence in the 12 months prior to the murder in 29.3%. Firearms were used in 69% of these homicides.

Unified description of astrophysical properties of neutron stars independent of the equation of state

Science.gov (United States)

Pappas, George

2015-12-01

In recent years, a lot of work was done that has revealed some very interesting properties of neutron stars. One can relate the first few multipole moments of a neutron star, or quantities that can be derived from them, with relations that are independent of the equation of state (EoS). This is a very significant result that has great implications for the description of neutron stars and in particular for the description of the spacetime around them. Additionally, it was recently shown that there is a four-parameter analytic spacetime, known as the two-soliton spacetime, which can accurately capture the properties of the geometry around neutron stars. This allows for the possibility of describing in a unified formalism the astrophysically relevant properties of the spacetime around a neutron star independently of the particulars of the EoS for the matter of the star. More precisely, the description of these astrophysical properties is done using an EoS omniscient spacetime that can describe the exterior of any neutron star. In the present work, we investigate properties such as the location of the innermost stable circular orbit RISCO (or the surface of the star when the latter overcomes the former), the various frequencies of perturbed circular equatorial geodesics, the efficiency of an accretion disc, its temperature distribution, and other properties associated with the emitted radiation from the disc, in a way that holds for all possible choices of a realistic EoS for the neutron star. Furthermore, we provide proof of principle that if one were to measure the right combinations of pairs of these properties, with the additional knowledge of the mass of the neutron star, one could determine the EoS of the star.

Metodology of identification parameters of models control objects of automatic trailing system

Directory of Open Access Journals (Sweden)

I.V. Zimchuk

2017-04-01

Full Text Available The determining factor for the successful solution of the problem of synthesis of optimal control systems of different processes are adequacy of mathematical model of control object. In practice, the options can differ from the objects taken priori, causing a need to clarification of them. In this context, the article presents the results of the development and application of methods parameters identification of mathematical models of control object of automatic trailing system. The stated problem in the article is solved provided that control object is fully controlled and observed, and a differential equation of control object is known a priori. The coefficients of this equation to be determined. Identifying quality criterion is to minimize the integral value of squared error of identification. The method is based on a description of the dynamics of the object in space state. Equation of identification synthesized using the vector-matrix representation of model. This equation describes the interconnection of coefficients of matrix state and control with inputs and outputs of object. The initial data for calculation are the results of experimental investigation of the reaction of phase coordinates of control object at a typical input signal. The process of calculating the model parameters is reduced to solving the system of equations of the first order each. Application the above approach is illustrated in the example identification of coefficients transfer function of control object first order. Results of digital simulation are presented, they are confirming the justice of set out mathematical calculations. The approach enables to do the identification of models of one-dimensional and multidimensional objects and does not require a large amount of calculation for its implementation. The order of identified model is limited capabilities of measurement phase coordinates of corresponding control object. The practical significance of the work is

Deep-inelastic final states in a space-time description of shower development and hadronization

International Nuclear Information System (INIS)

Ellis, J.

1996-06-01

We extend a quantum kinetic approach to the description of hadronic showers in space, time and momentum space to deep-inelastic ep collisions, with particular reference to experiments at HERA. We follow the history of hard scattering events back to the initial hadronic state and forward to the formation of colour-singlet pre-hadronic clusters and their decays into hadrons. The time evolution of the space-like initial-state shower and the time-like secondary partons are treated similarly, and cluster formation is treated using a spatial criterion motivated by confinement and a non-perturbative model for hadronization. We calculate the time evolution of particle distributions in rapidity, transverse and longitudinal space. We also compare the transverse hadronic energy flow and the distribution of observed hadronic masses with experimental data from HERA, finding encouraging results, and discuss the background to large-rapidity-gap events. The techniques developed in this paper may be applied in the future to more complicated processes such as eA, pp, pA and AA collisions. (orig.)

Deep-inelastic final states in a space-time description of shower development and hadronization

International Nuclear Information System (INIS)

Ellis, J.; Geiger, K.; Kowalski, H.

1996-01-01

We extend a quantum kinetic approach to the description of hadronic showers in space, time, and momentum space to deep-inelastic ep collisions, with particular reference to experiments at DESY HERA. We follow the history of hard scattering events back to the initial hadronic state and forward to the formation of color-singlet prehadronic clusters and their decays into hadrons. The time evolution of the spacelike initial-state shower and the timelike secondary partons are treated similarly, and cluster formation is treated using a spatial criterion motivated by confinement and a nonperturbative model for hadronization. We calculate the time evolution of particle distributions in rapidity, transverse, and longitudinal space. We also compare the transverse hadronic energy flow and the distribution of observed hadronic masses with experimental data from HERA, finding encouraging results, and discuss the background to large-rapidity-gap events. The techniques developed in this paper may be applied in the future to more complicated processes such as eA, pp, pA, and AA collisions. copyright 1996 The American Physical Society

A quantitative description of state-level taxation of oil and gas production in the continental U.S

International Nuclear Information System (INIS)

Weber, Jeremy G.; Wang, Yongsheng; Chomas, Maxwell

2016-01-01

We provide a quantitative description of state-level taxation of oil and gas production in the continental U.S. for 2004–2013. Aggregate revenues from production taxes nearly doubled in real terms over the period, reaching $10.3 billion and accounting for 20% of tax receipts in the top ten revenue states. The average state had a tax rate of 3.6%; nationally, the average dollar of production was taxed at 4.2%. The oil-specific rate estimated for the study period is $2.4 per barrel or $5.5 per ton of carbon. Lastly, state-level tax rates are two-thirds higher in states excluding oil and gas wells from local property taxes, suggesting that the policies are substitutes for one another. - Highlights: •State tax revenue from oil and gas production nearly doubled from 2004 to 2013. •Nationally, the typical dollar of production is taxed at 4.2%. •The rate applied to the typical dollar of production did not increase over time. •On average oil is taxed at $2.4 per barrel or $5.5 per ton of carbon. •State tax rates are two-thirds higher where oil and gas are not taxed as property.

Elaboration of methods for assessment of radio-ecological safety state of objects, situated on the territories contaminated with Chernobyl radionuclides

International Nuclear Information System (INIS)

Saltanov, Eugene; Saltanova, Irina

2008-01-01

The main purpose of assessment of radio-ecological state of object is to elaborate recommendations to reduce both radiation dose and negative action of other contaminators on human organism. The basis of objects' ecological safety assessment is considering complex influence of multiple negative factors, such as radioactive contamination, firstly, and air, water, soil and noise pollution, secondly. The objects of assessments are social, industrial, rural enterprises and their production: school buildings and territories, all kinds of recreational institutions, civil buildings, etc. The described method is embodied in a computer program, which enables calculation of integral indicator of contamination and gives information about object's safety state. The results of the work may be proposed to the corresponding supervisor institutions as a prototype of practical guidance to control ecological state of the objects and territories. Particularly, the proposed methods are necessary to determine the order of measures, normally undertaken to deactivate objects, and to provide unified approach to radio-ecological safety assessment of objects, situated in the territories contaminated with Chernobyl radionuclides. (author)

Classification of quantum relativistic orientable objects

Energy Technology Data Exchange (ETDEWEB)

Gitman, D M [Instituto de Fisica, Universidade de Sao Paulo, Caixa Postal 66318-CEP, 05315-970, Sao Paulo, SP (Brazil); Shelepin, A L, E-mail: gitman@dfn.if.usp.br, E-mail: alex@shelepin.msk.ru [Moscow Institute of Radio Engineering, Electronics and Automation, Prospect Vernadskogo, 78, 117454 Moscow (Russian Federation)

2011-01-15

Extending our previous work 'Fields on the Poincare group and quantum description of orientable objects' (Gitman and Shelepin 2009 Eur. Phys. J. C 61 111-39), we consider here a classification of orientable relativistic quantum objects in 3+1 dimensions. In such a classification, one uses a maximal set of ten commuting operators (generators of left and right transformations) in the space of functions on the Poincare group. In addition to the usual six quantum numbers related to external symmetries (given by left generators), there appear additional quantum numbers related to internal symmetries (given by right generators). Spectra of internal and external symmetry operators are interrelated, which, however, does not contradict the Coleman-Mandula no-go theorem. We believe that the proposed approach can be useful for the description of elementary spinning particles considered as orientable objects. In particular, it gives a group-theoretical interpretation of some facts of the existing phenomenological classification of spinning particles.

Classification of quantum relativistic orientable objects

International Nuclear Information System (INIS)

Gitman, D M; Shelepin, A L

2011-01-01

Extending our previous work 'Fields on the Poincare group and quantum description of orientable objects' (Gitman and Shelepin 2009 Eur. Phys. J. C 61 111-39), we consider here a classification of orientable relativistic quantum objects in 3+1 dimensions. In such a classification, one uses a maximal set of ten commuting operators (generators of left and right transformations) in the space of functions on the Poincare group. In addition to the usual six quantum numbers related to external symmetries (given by left generators), there appear additional quantum numbers related to internal symmetries (given by right generators). Spectra of internal and external symmetry operators are interrelated, which, however, does not contradict the Coleman-Mandula no-go theorem. We believe that the proposed approach can be useful for the description of elementary spinning particles considered as orientable objects. In particular, it gives a group-theoretical interpretation of some facts of the existing phenomenological classification of spinning particles.

Economic estimation of risk and compensation of damage from accidents in power engineering objects

International Nuclear Information System (INIS)

Lesnykh, V.V.

1996-01-01

Place and basic peculiarities of the task relative to compensation of damage due to accidents in the problem on technical-economical studies of the power engineering objects, including NPPs, are analyzed. Certain approaches in the task of the risk economical estimates and basic provisions of the economical damage compensation system are presented. Description of imitated and analytical approach in the task of estimating financial state is given and certain study results are presented. 11 refs., 8 figs

UO3 plant turnover - facility description document

International Nuclear Information System (INIS)

Clapp, D.A.

1995-01-01

This document was developed to provide a facility description for those portions of the UO 3 Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI

Non-convex multi-objective optimization

CERN Document Server

Pardalos, Panos M; Žilinskas, Julius

2017-01-01

Recent results on non-convex multi-objective optimization problems and methods are presented in this book, with particular attention to expensive black-box objective functions. Multi-objective optimization methods facilitate designers, engineers, and researchers to make decisions on appropriate trade-offs between various conflicting goals. A variety of deterministic and stochastic multi-objective optimization methods are developed in this book. Beginning with basic concepts and a review of non-convex single-objective optimization problems; this book moves on to cover multi-objective branch and bound algorithms, worst-case optimal algorithms (for Lipschitz functions and bi-objective problems), statistical models based algorithms, and probabilistic branch and bound approach. Detailed descriptions of new algorithms for non-convex multi-objective optimization, their theoretical substantiation, and examples for practical applications to the cell formation problem in manufacturing engineering, the process design in...

Users' Satisfaction with Library Services: A Case Study of Delta State University Library

Science.gov (United States)

Ikolo, Violet E.

2015-01-01

The study focused on users' satisfaction with library services at the Delta State University main Library, Abraka, Delta State. The objective was to find out if users are satisfied with the services, facilities, the library environment, information sources and staff of the library. Using the descriptive survey design, the population for the study…

Soft Biometrics; Human Identification Using Comparative Descriptions.

Science.gov (United States)

Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

2014-06-01

Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

Primary Numbers Database for ATLAS Detector Description Parameters

CERN Document Server

Vaniachine, A; Malon, D; Nevski, P; Wenaus, T

2003-01-01

We present the design and the status of the database for detector description parameters in ATLAS experiment. The ATLAS Primary Numbers are the parameters defining the detector geometry and digitization in simulations, as well as certain reconstruction parameters. Since the detailed ATLAS detector description needs more than 10,000 such parameters, a preferred solution is to have a single verified source for all these data. The database stores the data dictionary for each parameter collection object, providing schema evolution support for object-based retrieval of parameters. The same Primary Numbers are served to many different clients accessing the database: the ATLAS software framework Athena, the Geant3 heritage framework Atlsim, the Geant4 developers framework FADS/Goofy, the generator of XML output for detector description, and several end-user clients for interactive data navigation, including web-based browsers and ROOT. The choice of the MySQL database product for the implementation provides addition...

Efficient Identification of Objects Carrying Elements of High-Order Symmetry By Using Correlated Orbital Angular Momentum (OAM States

Directory of Open Access Journals (Sweden)

Sergienko Alexander V.

2014-01-01

The potential for efficient identification of objects carrying elements of high-order symmetry using correlated orbital angular momentum (OAM states is demonstrated. The enhanced information capacity of this approach allows the recognition of specific spatial symmetry signatures present in objects with the use of fewer resources than in a conventional pixel-by-pixel imaging, representing the first demonstration of compressive sensing using OAM states. This approach demonstrates the capability to quickly evaluate multiple Fourier coefficients directly linked with the symmetry features of the object. The results suggest further application in small-scale biological contexts where symmetry and small numbers of noninvasive measurements are important.

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

An Object Model for Integrating Diverse Remote Sensing Satellite Sensors: A Case Study of Union Operation

Directory of Open Access Journals (Sweden)

Chuli Hu

2014-01-01

Full Text Available In the Earth Observation sensor web environment, the rapid, accurate, and unified discovery of diverse remote sensing satellite sensors, and their association to yield an integrated solution for a comprehensive response to specific emergency tasks pose considerable challenges. In this study, we propose a remote sensing satellite sensor object model, based on the object-oriented paradigm and the Open Geospatial Consortium Sensor Model Language. The proposed model comprises a set of sensor resource objects. Each object consists of identification, state of resource attribute, and resource method. We implement the proposed attribute state description by applying it to different remote sensors. A real application, involving the observation of floods at the Yangtze River in China, is undertaken. Results indicate that the sensor inquirer can accurately discover qualified satellite sensors in an accurate and unified manner. By implementing the proposed union operation among the retrieved sensors, the inquirer can further determine how the selected sensors can collaboratively complete a specific observation requirement. Therefore, the proposed model provides a reliable foundation for sharing and integrating multiple remote sensing satellite sensors and their observations.

Quadrant I description of current conditions

International Nuclear Information System (INIS)

1990-09-01

In accordance with the requirements of the Consent Decree issued by the Ohio Attorney General's office on August 29, 1989 and with the RCRA Section 3008(h) Consent Order issued by the US Environmental Protection Agency, Region V (USEPA) on September 29, 1989, this report, which provides a Description of Current Conditions within Quadrant I of the Portsmouth Gaseous Diffusion Plant (PORTS) located in Piketon, Ohio, has been developed and submitted for approval. The objectives of this report are to provide data concerning: (1) the current state of knowledge of the environmental setting of Quadrant I of PORTS including ground water, surface water, soil and air; and (2) the extent of known, potential and suspected contamination of these segments of the environment in Quadrant I of the facility. This report is the initial step in the comprehensive RCRA Facility Investigation (RFI) currently underway at PORTS, and will provide a foundation for all subsequent activities related to the RFI in Quadrant I

Shelters. History, state and forecasting

International Nuclear Information System (INIS)

Geras'ko, V.N.; Klyuchnikov, A.A.; Korneev, A.A.

1997-01-01

For the first time were made attempt to systematize the result of scientific investigations in object 'Shelter' for the ten last years since the accident on 4-th unit of Chernobyl NPP. These materials contain the detailed analyses of the accident, the diagnostic of destroyed unit, the description of control systems, the results of investigations fuel-containing materials characteristics, there placement and state of nuclear and radiation safety. The results of inspect the building constructions, which are base of new defence construction present in this book. Were made the analyse of the influence on environment the 'Shelter' and estimated the consequences of accident on the object. Were estimated the projects, presented on the competition of implementation object 'Shelter', examined the perspective on realization of these projects

The Athena data dictionary and description language

International Nuclear Information System (INIS)

Bazan, Alain; Bouedo, Thierry; Ghez, Philippe; Marino, Massimo; Tull, Craig

2003-01-01

Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customize the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships,...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. We present here details of our work and experience to date on the Athena Definition Language and Athena Data Dictionary. (authors)

AutoBD: Automated Bi-Level Description for Scalable Fine-Grained Visual Categorization.

Science.gov (United States)

Yao, Hantao; Zhang, Shiliang; Yan, Chenggang; Zhang, Yongdong; Li, Jintao; Tian, Qi

Compared with traditional image classification, fine-grained visual categorization is a more challenging task, because it targets to classify objects belonging to the same species, e.g. , classify hundreds of birds or cars. In the past several years, researchers have made many achievements on this topic. However, most of them are heavily dependent on the artificial annotations, e.g., bounding boxes, part annotations, and so on . The requirement of artificial annotations largely hinders the scalability and application. Motivated to release such dependence, this paper proposes a robust and discriminative visual description named Automated Bi-level Description (AutoBD). "Bi-level" denotes two complementary part-level and object-level visual descriptions, respectively. AutoBD is "automated," because it only requires the image-level labels of training images and does not need any annotations for testing images. Compared with the part annotations labeled by the human, the image-level labels can be easily acquired, which thus makes AutoBD suitable for large-scale visual categorization. Specifically, the part-level description is extracted by identifying the local region saliently representing the visual distinctiveness. The object-level description is extracted from object bounding boxes generated with a co-localization algorithm. Although only using the image-level labels, AutoBD outperforms the recent studies on two public benchmark, i.e. , classification accuracy achieves 81.6% on CUB-200-2011 and 88.9% on Car-196, respectively. On the large-scale Birdsnap data set, AutoBD achieves the accuracy of 68%, which is currently the best performance to the best of our knowledge.Compared with traditional image classification, fine-grained visual categorization is a more challenging task, because it targets to classify objects belonging to the same species, e.g. , classify hundreds of birds or cars. In the past several years, researchers have made many achievements on this topic

Crosswalking EAD: Collaboration in Archival Description

Directory of Open Access Journals (Sweden)

Amy McCrory

2005-09-01

Full Text Available Different library departments must work together, both formally and informally, in implementing encoded archival description and in repackaging descriptive information about archival collections to other formats, particularly machine-readable cataloging. The authors, one a technical services librarian and the other a special collections archivist, describe their experiences collaborating in these processes at The Ohio State University. Although other institutions may differ in their organizational structure, the authors hope to provide technical guidance, as well as a model of collaboration between archivists and technical services personnel. Careful dialogue and planning are essential to transcend the traditional divide between archival and library descriptive practices and systems.

[Changes in functional state during occupational activities in workers at objects for chemical weapons destruction].

Science.gov (United States)

2010-01-01

The authors studied functional state before and after the working shift in workers at objects for chemical weapons destruction, analyzed changes in central and peripheral hemodynamics parameters, vegetative regulation of heart rhythm, stabilographic and psychophysiologic values.

A Linear Programming Model to Optimize Various Objective Functions of a Foundation Type State Support Program.

Science.gov (United States)

Matzke, Orville R.

The purpose of this study was to formulate a linear programming model to simulate a foundation type support program and to apply this model to a state support program for the public elementary and secondary school districts in the State of Iowa. The model was successful in producing optimal solutions to five objective functions proposed for…

MULTIPLE OBJECTS

Directory of Open Access Journals (Sweden)

A. A. Bosov

2015-04-01

Full Text Available Purpose. The development of complicated techniques of production and management processes, information systems, computer science, applied objects of systems theory and others requires improvement of mathematical methods, new approaches for researches of application systems. And the variety and diversity of subject systems makes necessary the development of a model that generalizes the classical sets and their development – sets of sets. Multiple objects unlike sets are constructed by multiple structures and represented by the structure and content. The aim of the work is the analysis of multiple structures, generating multiple objects, the further development of operations on these objects in application systems. Methodology. To achieve the objectives of the researches, the structure of multiple objects represents as constructive trio, consisting of media, signatures and axiomatic. Multiple object is determined by the structure and content, as well as represented by hybrid superposition, composed of sets, multi-sets, ordered sets (lists and heterogeneous sets (sequences, corteges. Findings. In this paper we study the properties and characteristics of the components of hybrid multiple objects of complex systems, proposed assessments of their complexity, shown the rules of internal and external operations on objects of implementation. We introduce the relation of arbitrary order over multiple objects, we define the description of functions and display on objects of multiple structures. Originality.In this paper we consider the development of multiple structures, generating multiple objects.Practical value. The transition from the abstract to the subject of multiple structures requires the transformation of the system and multiple objects. Transformation involves three successive stages: specification (binding to the domain, interpretation (multiple sites and particularization (goals. The proposed describe systems approach based on hybrid sets

Registration of Space Objects

Science.gov (United States)

Schmidt-Tedd, Bernhard

2017-07-01

Space objects are subject to registration in order to allocate "jurisdiction and control" over those objects in the sovereign-free environment of outer space. This approach is similar to the registration of ships in view of the high sea and for aircrafts with respect to the international airspace. Registration is one of the basic principles of space law, starting with UN General Assembly Resolution 1721 B (XVI) of December 20, 1961, followed by Resolution 1962 (XVIII) of December 13, 1963, then formulated in Article VIII of the Outer Space Treaty of 1967 and as specified in the Registration Convention of 1975. Registration of space objects can be seen today as a principle of customary international law, relevant for each spacefaring state. Registration is divided into a national and an international level. The State Party establishes a national registry for its space objects, and those registrations have to be communicated via diplomatic channel to the UN Register of space objects. This UN Register is handled by the UN Office for Outer Space Affairs (UNOOSA) and is an open source of information for space objects worldwide. Registration is linked to the so-called launching state of the relevant space object. There might be more than one launching state for the specific launch event, but only one state actor can register a specific space object. The state of registry gains "jurisdiction and control" over the space object and therefore no double registration is permissible. Based on the established UN Space Law, registration practice was subject to some adaptions due to technical developments and legal challenges. After the privatization of the major international satellite organizations, a number of non-registrations had to be faced. The state actors reacted with the UN Registration Practice Resolution of 2007 as elaborated in the Legal Subcommittee of UNCOPUOS, the Committee for the Peaceful Use of Outer Space. In this context an UNOOSA Registration Information

Effects of Climate Change on Poultry Production in Ondo State ...

African Journals Online (AJOL)

The study assessed the effects of climate change on poultry production in Ondo State, Nigeria. Eighty three (83) poultry farmers were interviewed to elicit relevant information in line with the objectives of the study. Descriptive statistics and inferential statistical tools were used for data analysis. Findings revealed that majority ...

Feedback produces divergence from prospect theory in descriptive choice.

Science.gov (United States)

Jessup, Ryan K; Bishara, Anthony J; Busemeyer, Jerome R

2008-10-01

A recent study demonstrated that individuals making experience-based choices underweight small probabilities, in contrast to the overweighting observed in a typical descriptive paradigm. We tested whether trial-by-trial feedback in a repeated descriptive paradigm would engender choices more correspondent with experiential or descriptive paradigms. The results of a repeated gambling task indicated that individuals receiving feedback underweighted small probabilities, relative to their no-feedback counterparts. These results implicate feedback as a critical component during the decision-making process, even in the presence of fully specified descriptive information. A model comparison at the individual-subject level suggested that feedback drove individuals' decision weights toward objective probability weighting.

RETRIEVAL EQUIPMENT DESCRIPTIONS

International Nuclear Information System (INIS)

J. Steinhoff

1997-01-01

The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

From learning objects to learning activities

DEFF Research Database (Denmark)

Dalsgaard, Christian

2005-01-01

This paper discusses and questions the current metadata standards for learning objects from a pedagogical point of view. From a social constructivist approach, the paper discusses how learning objects can support problem based, self-governed learning activities. In order to support this approach......, it is argued that it is necessary to focus on learning activities rather than on learning objects. Further, it is argued that descriptions of learning objectives and learning activities should be separated from learning objects. The paper presents a new conception of learning objects which supports problem...... based, self-governed activities. Further, a new way of thinking pedagogy into learning objects is introduced. It is argued that a lack of pedagogical thinking in learning objects is not solved through pedagogical metadata. Instead, the paper suggests the concept of references as an alternative...

Objective and Essential Elements of a State's Nuclear Security Regime. Nuclear Security Fundamentals

International Nuclear Information System (INIS)

2013-01-01

The possibility that nuclear material or other radioactive material could be used for criminal purposes or intentionally used in an unauthorized manner cannot be ruled out in the current global situation. States have responded to this risk by engaging in a collective commitment to strengthen the protection and control of such material and to respond effectively to nuclear security events. States have agreed to strengthen existing instruments and have established new international legal instruments to enhance nuclear security worldwide. Nuclear security is fundamental in the management of nuclear technologies and in applications where nuclear material or other radioactive material is used or transported. Through its nuclear security programme, the IAEA supports States to establish, maintain and sustain an effective nuclear security regime. The IAEA has adopted a comprehensive approach to nuclear security. This recognizes that an effective national nuclear security regime builds on: the implementation of relevant international legal instruments; information protection; physical protection; material accounting and control; detection of and response to trafficking in such material; national response plans; and contingency measures. With its Nuclear Security Series, the IAEA aims to assist States in implementing and sustaining such a regime in a coherent and integrated manner. The IAEA Nuclear Security Series comprises: Nuclear Security Fundamentals, which include the objective and essential elements of a State's nuclear security regime; Recommendations; Implementing Guides; and Technical Guidance. Each State carries the full responsibility for nuclear security. Specifically, each State has the responsibility to provide for the security of nuclear material and other radioactive material and their associated facilities and activities; to ensure the security of such material in use, storage, or in transport; to combat illicit trafficking and the inadvertent movement of

Corporate social responsibility investment and social objectives : An examination on social welfare investment of chinese state owned enterprises

NARCIS (Netherlands)

Bo, H.; Li, T.; Toolsema-Veldman, Linda

We apply the theory of corporate social responsibility to analyse social welfare investment undertaken by Chinese State Owned Enterprises (SOEs). We present a simple theoretical model to illustrate how the presence of social objectives in the firm's objective function changes its investment

Planning for people? An evaluation of objectives for managing visitors at wildlife refuges in the United States

Science.gov (United States)

Jeffrey J. Brooks; Robert Massengale

2011-01-01

This study evaluates the quality of planning objectives for visitor services as written in Comprehensive Conservation Plans for the National Wildlife Refuge System of the United States. Planners in the U.S. Fish and Wildlife Service are predominantly writing public use objectives that address wildlife recreation and education. Results indicate that planners are writing...

The athena data dictionary and description language

International Nuclear Information System (INIS)

Bazan, A.; Ghez, P.; Le Flour, T.; Lieunard, S.; Tull, C.

2001-01-01

The authors have developed a data object description tool suite and service for Athena consisting of: a language grammar based upon an extended proper subset of IDL 2.0, a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface, and several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. The authors present here details of the work and experience to date on the Athena Definition Language and Athena Data Dictionary

Category-specificity in visual object recognition

DEFF Research Database (Denmark)

Gerlach, Christian

2009-01-01

binding of shape elements into elaborate shape descriptions) and selection (among competing representations in visual long-term memory), which are held to be differentially affected by the structural similarity between objects. Drawing on evidence from clinical studies, experimental studies...

Channels as Objects in Concurrent Object-Oriented Programming

Directory of Open Access Journals (Sweden)

Joana Campos

2011-10-01

Full Text Available There is often a sort of a protocol associated to each class, stating when and how certain methods should be called. Given that this protocol is, if at all, described in the documentation accompanying the class, current mainstream object-oriented languages cannot provide for the verification of client code adherence against the sought class behaviour. We have defined a class-based concurrent object-oriented language that formalises such protocols in the form of usage types. Usage types are attached to class definitions, allowing for the specification of (1 the available methods, (2 the tests clients must perform on the result of methods, and (3 the object status - linear or shared - all of which depend on the object's state. Our work extends the recent approach on modular session types by eliminating channel operations, and defining the method call as the single communication primitive in both sequential and concurrent settings. In contrast to previous works, we define a single category for objects, instead of distinct categories for linear and for shared objects, and let linear objects evolve into shared ones. We introduce a standard sync qualifier to prevent thread interference in certain operations on shared objects. We formalise the language syntax, the operational semantics, and a type system that enforces by static typing that methods are called only when available, and by a single client if so specified in the usage type. We illustrate the language via a complete example.

Multi-objective based on parallel vector evaluated particle swarm optimization for optimal steady-state performance of power systems

DEFF Research Database (Denmark)

Vlachogiannis, Ioannis (John); Lee, K Y

2009-01-01

In this paper the state-of-the-art extended particle swarm optimization (PSO) methods for solving multi-objective optimization problems are represented. We emphasize in those, the co-evolution technique of the parallel vector evaluated PSO (VEPSO), analysed and applied in a multi-objective problem...

Partial Evaluation for Class-Based Object-Oriented Languages

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh

2001-01-01

Object-oriented programming facilitates the development of generic software, but at a significant cost in terms of performance. We apply partial evaluation to object-oriented programs, to automatically map generic software into specific implementations. In this paper we give a concise, formal...... description of a simple partial evaluator for a minimal object-oriented language, and give directions for extending this partial evaluator to handle realistic programs....

Towards C++ object libraries for accelerator physics

International Nuclear Information System (INIS)

Michelotti, L.

1992-01-01

This paper concerns creation of libraries of reusable objects in the language C ++ for doing accelerator design and analysis. The C ++ language possesses features which lend themselves to writing portable, scientific solftware. The two libraries of C ++ classes (objects) which have been under development are (1) MXYZPTLK, which implements automatic differentiation and (2) BEAMLINE, which provides objects for modeling beam line and accelerator components. A description of the principle classes in these two libraries is presented

Microscopic description of the three major bands in transitional nuclei

International Nuclear Information System (INIS)

Pineda S, R.L.

1986-01-01

The author has extended the Coherent Phonon Model to the description of the three major bands in medium heavy transitional nuclei. The model assumes an axially symmetric deformed ground intrinsic state for the description of the low lying yrast levels of the ground band, while the excited bands are generated by intrinsic excitations of the ground band. Good angular momentum states are generated by the Peierls-Yoccoz angular momentum projection method

Stochastic final-state dynamics of widening entanglement-a possible description of quantum measurement

International Nuclear Information System (INIS)

Eriksson, Karl-Erik

2009-01-01

The measurement process of quantum mechanics is analysed in the scattering theory of quantum field theory. A matrix of bilinear forms of the scattering amplitudes (the R-matrix) is used as the basic descriptive tool. The measurement process is viewed as a final-state interaction described through a series of linear stochastic mappings of the R-matrix, not changing the observable to be measured. The unknown details of the measurement apparatus enter through the stochasticity of the mappings. Although linear in terms of the R-matrix, the mappings are nonlinear in the density matrix, which is obtainable from the R-matrix through normalization. The eigenstates of the observable are the attractors of the mapping process. This result, known from previous generalizations of quantum mechanics, is obtained here within linear quantum mechanics. The conclusion is that the measurement process can be understood within relativistic quantum field theory itself without any generalization or metatheory.

Thermal solar energy in Spain. State of the art and objectives

International Nuclear Information System (INIS)

Glenn, Jaouen

2006-01-01

According the Kyoto protocol, Spain has to reduce its CO 2 emissions at 330 millions of tons (a decrease of 18 % from the level of 2003). From the european commission policy, the energy resources will be of 12 % of renewable energies. In this context, Spain developed an energy policy in favor of the solar energy. This document provides information on: the energy market in Spain, the thermal solar energy operating, the CO 2 emissions, the state of the art in the domain in spain, the 2010 objectives, the programs and the assistance, some data on the solar market in comparison with the Europe. (A.L.B.)

BWR Full Integral Simulation Test (FIST) program: facility description report

International Nuclear Information System (INIS)

Stephens, A.G.

1984-09-01

A new boiling water reactor safety test facility (FIST, Full Integral Simulation Test) is described. It will be used to investigate small breaks and operational transients and to tie results from such tests to earlier large-break test results determined in the TLTA. The new facility's full height and prototypical components constitute a major scaling improvement over earlier test facilities. A heated feedwater system, permitting steady-state operation, and a large increase in the number of measurements are other significant improvements. The program background is outlined and program objectives defined. The design basis is presented together with a detailed, complete description of the facility and measurements to be made. An extensive component scaling analysis and prediction of performance are presented

Parametric description of the quantum measurement process

Science.gov (United States)

Liuzzo-Scorpo, P.; Cuccoli, A.; Verrucchi, P.

2015-08-01

We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical crossover. Focusing upon projective measures, and exploiting the connection between large-N quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

A Cross-cultural Comparison of Objectivity in Childhood Games: Iran and the United States.

Science.gov (United States)

Rastegarpour, Ali

2011-07-01

Games have been introduced as a means for studying cross-cultural differences and societies. This paper presents a case study in analogous games played by children in two different countries with two different cultures - Iran and the United States. Four examples are presented to demonstrate that games played by Iranian children are subject to less objectivity in their rules. Therefore, nonobjectivity may be a phenomenon that has roots in the society and the many differences between the two societies may very well be the results of this fundamental difference. If the presence of objectivity in childhood game rules could be, in actuality, indicative of objectivity in social and civil interactions in the everyday lives of the people, the direction of causality remains to be established. In other words, it remains unclear whether the games influence the culture or are influenced by the mandates of the society.

Detailed description of an SSAC at the facility level for light water moderated (off-load refueled) power reactor facilities

International Nuclear Information System (INIS)

Jones, R.J.

1985-03-01

This report is intended to provide the technical details of an effective State Systems of Accounting for and Control of Nuclear Material (SSAC) which Member States may use, if they wish, to establish and maintain their SSACs. It is expected that systems designed along the lines described would be effective in meeting the objectives of both national and international systems for nuclear material accounting and control. This document accordingly provides a detailed description of a system for the accounting for and control of nuclear material in an off-load refueled light water moderated power reactor facility which can be used by a facility operator to establish his own system to comply with a national system for nuclear material accounting and control and to facilitate application of IAEA safeguards. The scope of this document is limited to descriptions of the following elements: (1) Nuclear Material Measurements; (2) Measurement Quality; (3) Records and Reports; (4) Physical Inventory Taking; (5) Material Balance Closing

Quantum description of microscopic and macroscopic systems: Old problems and recent investigations

International Nuclear Information System (INIS)

Ghirardi, G.C.

1986-04-01

We review some open problems and some proposed solutions which are encountered in the quantum description of the microscopic systems, of the macroscopic ones, and of the interactions between these two types of objects. We describe a recent attempt allowing a unified description of all phenomena, reproducing the quantum mechanical situation for microscopic systems and inducing in a completely consistent way the classical behaviour of macro object and the phenomena of wave packet reduction in the system-apparatus interaction. (author)

Effects of freezing-thawing on sensory descriptive profiles of cooked poultry breast meat

Directory of Open Access Journals (Sweden)

ZHUANG Hong

2014-12-01

Full Text Available Freezing is a common method used by consumers to extend meat shelf life and by researchers to allow for subsequent meat quality assessments and processing.However,the effects of freezing on the sensory quality of cooked poultry breast meat are not well documented.The objective of this study was to compare sensory quality profiles of fresh and frozen/thawed chicken breast fillets (pectoralis major.Breast fillets were removed from carcasses within 24 h postmortem and either cooked from a fresh state or placed in a -20℃ freezer.Frozen samples were thawed by three different methods:thawing during cooking directly from a frozen state (0 h,thawing in 20℃ water for 2 h prior to cooking (2 h,or thawing at 4℃ for 24 h prior to cooking (24 h.A control treatment with fillets cooked directly from a fresh state was used.Fillets were cooked to an endpoint temperature of 78℃ and sensory quality was evaluated by trained descriptive panelists using 0~15 universal intensity scales.Results show that there were not treatment differences (P>0.05 in the average intensity scores for any of the descriptive flavor attributes or for 5 of the descriptive texture attributes (cohesiveness,hardness,juiciness,wad size,and wetness of wad.However,the intensity scores for cohesiveness of mass,rate of breakdown,and chewiness were significantly different among the treatments (P<0.05.Cohesiveness of mass intensity scores for 0h and 24 h fillets were significantly higher than 2 h samples.Fillets cooked directly from a frozen state (0 h had significantly higher intensity scores for rate of breakdown and chewiness than fresh controls and 2 h samples,respectively.These results indicate that freezing-thawing does not affect sensory flavor quality;however,it may change the texture attributes of cooked chicken breast meat products.The effects on meat texture depend on thawing methods prior to cooking.

Color Feature-Based Object Tracking through Particle Swarm Optimization with Improved Inertia Weight.

Science.gov (United States)

Guo, Siqiu; Zhang, Tao; Song, Yulong; Qian, Feng

2018-04-23

This paper presents a particle swarm tracking algorithm with improved inertia weight based on color features. The weighted color histogram is used as the target feature to reduce the contribution of target edge pixels in the target feature, which makes the algorithm insensitive to the target non-rigid deformation, scale variation, and rotation. Meanwhile, the influence of partial obstruction on the description of target features is reduced. The particle swarm optimization algorithm can complete the multi-peak search, which can cope well with the object occlusion tracking problem. This means that the target is located precisely where the similarity function appears multi-peak. When the particle swarm optimization algorithm is applied to the object tracking, the inertia weight adjustment mechanism has some limitations. This paper presents an improved method. The concept of particle maturity is introduced to improve the inertia weight adjustment mechanism, which could adjust the inertia weight in time according to the different states of each particle in each generation. Experimental results show that our algorithm achieves state-of-the-art performance in a wide range of scenarios.

Relational description of the measurement process in quantum field theory

International Nuclear Information System (INIS)

Gambini, Rodolfo; Porto, Rafael A.

2002-01-01

We have recently introduced a realistic, covariant, interpretation for the reduction process in relativistic quantum mechanics. The basic problem for a covariant description is the dependence of the states on the frame within which collapse takes place. A suitable use of the causal structure of the devices involved in the measurement process allowed us to introduce a covariant notion for the collapse of quantum states. However, a fully consistent description in the relativistic domain requires the extension of the interpretation to quantum fields. The extension is far from straightforward. Besides the obvious difficulty of dealing with the infinite degrees of freedom of the field theory, one has to analyse the restrictions imposed by causality concerning the allowed operations in a measurement process. In this paper we address these issues. We shall show that, in the case of partial causally connected measurements, our description allows us to include a wider class of causal operations than the one resulting from the standard way of computing conditional probabilities. This alternative description could be experimentally tested. A verification of this proposal would give stronger support to the realistic interpretations of the states in quantum mechanics. (author)

The Athena Data Dictionary and Description Language

CERN Document Server

Bazan, A; Ghez, P; Marino, M; Tull, C

2003-01-01

Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customise the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships, ...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic...

Object recognition and concept learning with Confucius

Energy Technology Data Exchange (ETDEWEB)

Cohen, B; Sammut, C

1982-01-01

A learning program produces, as its output, a Boolean function which describes a concept. The function returns true if and only if the argument is an object which satisfies the logical expression in the body of the function. The learning program's input is a set of objects which are instances of the concept to be learnt. The paper describes an algorithm devised to learn concept descriptions in this form. 15 references.

The state manager

International Nuclear Information System (INIS)

Defendini, A.; Jones, R.; Matheys, J.P.; Vyvre, P.V.; Vascotto, A.

1992-01-01

The State Manager system (SM) is a set of tools, developed at CERN, for the control of large data-acquisition systems. A dedicated object-based language is used to describe the various components of the data-acquisition system. Each component is declared in terms of finite state machines and sequences of parametrized actions to be performed for operations such as the start and end of a run. The description, written by the user, is translated into Ada to produce a run-control program capable of controlling processes in a distributed environment. A Motif-based graphical interface to the control program displays the current state of all the components and can be used to control the overall data-acquisition system. The SM has been used by several experiments both at CERN and other organizations. We present here the architecture of the SM, some design choices, and the experience acquired from its use. (author)

Analysis of Respiratory Sounds: State of the Art

Directory of Open Access Journals (Sweden)

Sandra Reichert

2008-01-01

Full Text Available Objective This paper describes state of the art, scientific publications and ongoing research related to the methods of analysis of respiratory sounds. Methods and material Review of the current medical and technological literature using Pubmed and personal experience. Results The study includes a description of the various techniques that are being used to collect auscultation sounds, a physical description of known pathologic sounds for which automatic detection tools were developed. Modern tools are based on artificial intelligence and on technics such as artificial neural networks, fuzzy systems, and genetic algorithms… Conclusion The next step will consist in finding new markers so as to increase the efficiency of decision aid algorithms and tools.

The timing of marriage vis-à-vis coresidence and childbearing in Europe and the United States

NARCIS (Netherlands)

J.A. Holland (Jennifer)

2017-01-01

textabstractOBJECTIVE These descriptive findings extend Holland's (2013) marriage typology by linking the timing of marriage, childbearing, and cohabitation, and apply it to a range of European countries and the United States. The meaning of marriage is organized around six ideal types: Direct

Category-specificity in visual object recognition

DEFF Research Database (Denmark)

Gerlach, Christian

2009-01-01

Are all categories of objects recognized in the same manner visually? Evidence from neuropsychology suggests they are not: some brain damaged patients are more impaired in recognizing natural objects than artefacts whereas others show the opposite impairment. Category-effects have also been...... demonstrated in neurologically intact subjects, but the findings are contradictory and there is no agreement as to why category-effects arise. This article presents a Pre-semantic Account of Category Effects (PACE) in visual object recognition. PACE assumes two processing stages: shape configuration (the...... binding of shape elements into elaborate shape descriptions) and selection (among competing representations in visual long-term memory), which are held to be differentially affected by the structural similarity between objects. Drawing on evidence from clinical studies, experimental studies...

Ritualized Space and Objects of Sacrosanctity

DEFF Research Database (Denmark)

2010-01-01

: such areas, buildings, places, and objects, stand out as ritualized physical structures. In the West, historically, such traditions have included hierarchies of sacred places (e.g. Jerusalem, Mecca, Rome), defined by mythical events and religious memory; sacred bodies (dead or alive) as manifested......The idea that formalized performative acts may manifest sacrosanctity spatially or in specific physical objects is often brought out in descriptions of ritual practices. Rituals of sanctification or dedication of sacred areas, temples, churches, and objects of veneration provide well-known examples...... by different kinds of ordination or initiation (e.g. saints, kings, priests, ordinary Christians); sacred buildings, places, and objects (churches and monasteries with their precincts including graveyards; various kinds of vessels, reliquaries, altars, crucifixes, books, thrones, statues, pictures, etc). Each...

[Life quality parameters in prenosologic evaluation of health state in residents of protective measures area near objects of storage and destruction of chemical weapons].

Science.gov (United States)

Filippov, V L; Nechaeva, E N

2014-01-01

The article presents results of life quality assessment and subjective evaluation data on health state, used for prenosologic evaluation of health state in residents of protective measures area near objects of storage and destruction of chemical weapons. Considering specific features of residence near potentially dangerous objects, the authors conducted qualitative evaluation of satisfaction with various life facets, with taking into account the objects specificity, established correlation between life quality and self-evaluation of health with factors influencing public health state.

Deep hierarchical attention network for video description

Science.gov (United States)

Li, Shuohao; Tang, Min; Zhang, Jun

2018-03-01

Pairing video to natural language description remains a challenge in computer vision and machine translation. Inspired by image description, which uses an encoder-decoder model for reducing visual scene into a single sentence, we propose a deep hierarchical attention network for video description. The proposed model uses convolutional neural network (CNN) and bidirectional LSTM network as encoders while a hierarchical attention network is used as the decoder. Compared to encoder-decoder models used in video description, the bidirectional LSTM network can capture the temporal structure among video frames. Moreover, the hierarchical attention network has an advantage over single-layer attention network on global context modeling. To make a fair comparison with other methods, we evaluate the proposed architecture with different types of CNN structures and decoders. Experimental results on the standard datasets show that our model has a more superior performance than the state-of-the-art techniques.

The Dante pulse sequence description by product operators formalism

International Nuclear Information System (INIS)

Velloso, Marcia Helena Rodrigues; Villar, Daniel Figueroa

1999-01-01

The objective of this work is to supply a didactic example of the application of the product operators formalism for the description of the DANTE (delays alternating with mutation for tailored excitation) pulse sequence

Multiparty Compatibility for Concurrent Objects

Directory of Open Access Journals (Sweden)

Roly Perera

2016-06-01

Full Text Available Objects and actors are communicating state machines, offering and consuming different services at different points in their lifecycle. Two complementary challenges arise when programming such systems. When objects interact, their state machines must be "compatible", so that services are requested only when they are available. Dually, when objects refine other objects, their state machines must be "compliant", so that services are honoured whenever they are promised. In this paper we show how the idea of multiparty compatibility from the session types literature can be applied to both of these problems. We present an untyped language in which concurrent objects are checked automatically for compatibility and compliance. For simple objects, checking can be exhaustive and has the feel of a type system. More complex objects can be partially validated via test cases, leading to a methodology closer to continuous testing. Our proof-of-concept implementation is limited in some important respects, but demonstrates the potential value of the approach and the relationship to existing software development practices.

The United States nuclear plant reliability data program: Its description and status

International Nuclear Information System (INIS)

Wise, M.J.

1975-01-01

The American National Standards Institute Subcommittee N18-20 has developed and implemented the United States Nuclear Plant Reliability Data System (NPRDS). The NPRDS is designed to accumulate, store, analyse, and report reliability and failure statistics on systems and components of nuclear power plants related to nuclear safety. Input data to the NPRDS consist of engineering, operating, and failure information submitted on a voluntary basis by participating utilities. Prior to entry into the computerized data base, the data are thoroughly checked for accuracy by both the submitting organizations and the NPRDS operating contractor. The data base is the source of various periodic output reports to the nuclear power industry and is utilized to produce special reports upon request. The present data base represents data accumulated from about thirty nuclear units with additional units expected to begin submitting data immediately. The objective is to have essentially all operating nuclear units in the United States of America participating in the program by the end of 1975. The first NPRDS annual reports containing meaningful reliability and failure statistics are expected to be produced following the end of 1975. (author)

Congress ANPCONT: descriptive and evaluative bibliometric analysis of the articles published from 2007 to 2011 - doi: 10.4025/enfoque.v31i3.16946

Directory of Open Access Journals (Sweden)

Eduardo Bona Safe de Matos

2012-12-01

Full Text Available The analysis of congresses, scientific journals and scientific production is held in different areas of science, with objective of understanding the authors’ profile, the production characteristics or evaluate those qualities. Despite using different methods and tools, the objectives commonly propose to develop the science and characterization of the production in different areas. This paper is aimed with two objectives related to two different areas of the bibliometrics, evaluative and descriptive, characterizing its differential. The general objective consists in the analysis and understanding of the characteristics of the works published in the Congress ANPCONT, and the specific objectives are the showing of the authors’ profile, of the productions and use the of the references. The methods used are bibliometrics and, for the descriptive analysis it is applied the Lotka Law, which determines the productivity of the authors. For the evaluative analysis it is applied the study of the typology of the references used. As a result, in respect to the authors profile, thy are, in general, connected to the academy, professors and doctors, with predominance of author from Universidade de São Paulo, Fucape Business School and Universidade Regional de Blumenau. In respect to the descriptive analysis, the production does not adjust to the Lotka Law, and in respect to the evaluative analysis is observed that there is a predominance of use of international papers in the researches. It is concluded that the production demonstrated a development during the years, and some authors, universities and states are highlighted in the congress production.

Geological evolution, palaeoclimate and historical development of the Forsmark and Laxemar-Simpevarp areas. Site descriptive modelling SDM-Site

Energy Technology Data Exchange (ETDEWEB)

Soederbaeck, Bjoern [ed.

2008-06-15

The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The site investigations started in 2002 and were completed in 2007. The analysis and modelling of data from the site investigations, which have taken place during and after these investigations, provide a foundation for the development of an integrated, multidisciplinary site descriptive model (SDM) for each of the two sites. A site descriptive model constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere, as well as those natural processes that affect or have affected their long-term development. Hitherto, a number of reports presenting preliminary site descriptive models for Forsmark and Laxemar-Simpevarp have been published. In these reports, the evolutionary and historical aspects of the site were included in a separate chapter. The present report comprises a further elaboration of the evolutionary and historical information included in the preliminary SDM reports, but presented here in a separate, supplementary report to the final site description, SDM-Site. The report is common to the two investigated areas, and the overall objective is to describe the long-term geological evolution, the palaeoclimate, and the post-glacial development of ecosystems and of the human population at the two sites. The report largely consists of a synthesis of information derived from the scientific literature and other sources not related to the site investigations. However, considerable information from the site investigations that has contributed to our understanding of the past development at each site is also included. This unique synthesis of both published information in a regional perspective and new site-specific information breaks new ground in our understanding

Geological evolution, palaeoclimate and historical development of the Forsmark and Laxemar-Simpevarp areas. Site descriptive modelling SDM-Site

International Nuclear Information System (INIS)

Soederbaeck, Bjoern

2008-06-01

The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The site investigations started in 2002 and were completed in 2007. The analysis and modelling of data from the site investigations, which have taken place during and after these investigations, provide a foundation for the development of an integrated, multidisciplinary site descriptive model (SDM) for each of the two sites. A site descriptive model constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere, as well as those natural processes that affect or have affected their long-term development. Hitherto, a number of reports presenting preliminary site descriptive models for Forsmark and Laxemar-Simpevarp have been published. In these reports, the evolutionary and historical aspects of the site were included in a separate chapter. The present report comprises a further elaboration of the evolutionary and historical information included in the preliminary SDM reports, but presented here in a separate, supplementary report to the final site description, SDM-Site. The report is common to the two investigated areas, and the overall objective is to describe the long-term geological evolution, the palaeoclimate, and the post-glacial development of ecosystems and of the human population at the two sites. The report largely consists of a synthesis of information derived from the scientific literature and other sources not related to the site investigations. However, considerable information from the site investigations that has contributed to our understanding of the past development at each site is also included. This unique synthesis of both published information in a regional perspective and new site-specific information breaks new ground in our understanding

Mining skeletal phenotype descriptions from scientific literature.

Directory of Open Access Journals (Sweden)

Tudor Groza

Full Text Available Phenotype descriptions are important for our understanding of genetics, as they enable the computation and analysis of a varied range of issues related to the genetic and developmental bases of correlated characters. The literature contains a wealth of such phenotype descriptions, usually reported as free-text entries, similar to typical clinical summaries. In this paper, we focus on creating and making available an annotated corpus of skeletal phenotype descriptions. In addition, we present and evaluate a hybrid Machine Learning approach for mining phenotype descriptions from free text. Our hybrid approach uses an ensemble of four classifiers and experiments with several aggregation techniques. The best scoring technique achieves an F-1 score of 71.52%, which is close to the state-of-the-art in other domains, where training data exists in abundance. Finally, we discuss the influence of the features chosen for the model on the overall performance of the method.

An objective interpretation of Lagrangian quantum mechanics

International Nuclear Information System (INIS)

Roberts, K.V.

1978-01-01

Unlike classical mechanics, the Copenhagen interpretation of quantum mechanics does not provide an objective space-time picture of the actual history of a physical system. This paper suggests how the conceptual foundations of quantum mechanics can be reformulated, without changing the mathematical content of the theory or its detailed agreement with experiment and without introducing any hidden variables, in order to provide an objective, covariant, Lagrangian description of reality which is deterministic and time-symmetric on the microscopic scale. The basis of this description can be expressed either as an action functional or as a summation over Feynman diagrams or paths. The probability laws associated with the quantum-mechanical measurement process, and the asymmetry in time of the principles of macroscopic causality and of the laws of statistical mechanics, are interpreted as consequences of the particular boundary conditions that apply to the actual universe. The objective interpretation does not include the observer and the measurement process among the fundamental concepts of the theory, but it does not entail a revision of the ideas of determinism and of time, since in a Lagrangian theory both initial and final boundary conditions on the action functional are required. (author)

New development of the projected shell model and description of low-lying collective states in transitional nuclei

International Nuclear Information System (INIS)

Chen, F. Q.; Sun, Y.

2013-01-01

Description of the interplay between different nuclear shapes is an interesting but challenging problem. The original projected shell model (PSM) is applicable to nuclei with fixed shapes. We extend the PSM by superimposing (angular-momentum- and particle-number-) projected product wave functions in the spirit of the generate coordinate method. With this development, the Gd isotopes across the N = 90 region are studied, and the results indicate spectroscopic features of shape phase transition with varying neutron number. In order to illustrate the shape distribution in microscopic wave functions, we introduce a deformation representation and show that the collectively excited K π = 0 + states in the Gd isotopes have characters of shape vibration. (authors)

Reconsidering the risk assessment concept: Standardizing the impact description as a building block for vulnerability assessment

Directory of Open Access Journals (Sweden)

K. Hollenstein

2005-01-01

Full Text Available Risk assessments for natural hazards are becoming more widely used and accepted. Using an extended definition of risk, it becomes obvious that performant procedures for vulnerability assessments are vital for the success of the risk concept. However, there are large gaps in knowledge about vulnerability. To alleviate the situation, a conceptual extension of the scope of existing and new models is suggested. The basis of the suggested concept is a stadardization of the output of hazard assessments. This is achieved by defining states of the target objects that depend on the impact and at the same time affect the object's performance characteristics. The possible state variables can be related to a limited set of impact descriptors termed generic impact description interface. The concept suggests that both hazard and vulnerability assessment models are developed according to the specification of this interface, thus facilitating modularized risk assessments. Potential problems related to the application of the concept include acceptance issues and the lacking accuracy of transformation of outputs of existing models. Potential applications and simple examples for adapting existing models are briefly discussed.

Hanford Waste Vitrification Plant quality assurance program description: Overview and applications

International Nuclear Information System (INIS)

Caplinger, W.H.

1990-12-01

This document describes the Hanford Waste Vitrification Plant Project Quality Assurance Program. This program is being implemented to ensure the acceptability of high-level radioactive canistered waste forms produced by the Hanford Waste Vitrification Plant for disposal in a licensed federal repository. The Hanford Waste Vitrification Plant Quality Assurance Program is comprised of this Quality Assurance Program Description as well as the associated contractors' quality assurance programs. The objective of this Quality Assurance Program Description is to provide the Hanford Waste Vitrification Plant Project participants with guidance and direction for program implementation while satisfying the US Department of Energy Office of Civilian Radioactive Waste Management needs in repository licensing activities with regard to canistered waste forms. To accomplish this objective, this description will be prepared in three parts: Part 1 - Overview and applications document; Part 2 - Development and qualification of the canistered waste form; Part 3 - Production of canistered waste forms. Part 1 describes the background, strategy, application, and content of the Hanford Waste Vitrification Plant Quality Assurance Program. This Quality Assurance Program Description, when complete, is designed to provide a level of confidence in the integrity of the canistered waste forms. 8 refs

77 FR 24200 - Clean Air Act Operating Permit Program; Petitions for Objection to State Operating Permits for...

Science.gov (United States)

2012-04-23

... Objection to State Operating Permits for Consolidated Environmental Management, Inc.--Nucor Steel Louisiana... Management, Inc.--Nucor Steel Louisiana (``Nucor'') in Saint James Parish, Louisiana. Pursuant to sections... Environmental Management, Inc.--Nucor Steel Louisiana (``Nucor'') is available electronically at: http://www.epa...

Contextual object understanding through geospatial analysis and reasoning (COUGAR)

Science.gov (United States)

Douglas, Joel; Antone, Matthew; Coggins, James; Rhodes, Bradley J.; Sobel, Erik; Stolle, Frank; Vinciguerra, Lori; Zandipour, Majid; Zhong, Yu

2009-05-01

Military operations in urban areas often require detailed knowledge of the location and identity of commonly occurring objects and spatial features. The ability to rapidly acquire and reason over urban scenes is critically important to such tasks as mission and route planning, visibility prediction, communications simulation, target recognition, and inference of higher-level form and function. Under DARPA's Urban Reasoning and Geospatial ExploitatioN Technology (URGENT) Program, the BAE Systems team has developed a system that combines a suite of complementary feature extraction and matching algorithms with higher-level inference and contextual reasoning to detect, segment, and classify urban entities of interest in a fully automated fashion. Our system operates solely on colored 3D point clouds, and considers object categories with a wide range of specificity (fire hydrants, windows, parking lots), scale (street lights, roads, buildings, forests), and shape (compact shapes, extended regions, terrain). As no single method can recognize the diverse set of categories under consideration, we have integrated multiple state-of-the-art technologies that couple hierarchical associative reasoning with robust computer vision and machine learning techniques. Our solution leverages contextual cues and evidence propagation from features to objects to scenes in order to exploit the combined descriptive power of 3D shape, appearance, and learned inter-object spatial relationships. The result is a set of tools designed to significantly enhance the productivity of analysts in exploiting emerging 3D data sources.

Description of the Charge Transfer States at the Pentacene/C60 Interface: Combining Range-Separated Hybrid Functionals with the Polarizable Continuum Model

KAUST Repository

Zheng, Zilong

2016-06-24

Density functional theory (DFT) approaches based on range-separated hybrid functionals are currently methods of choice for the description of the charge-transfer (CT) states in organic donor/acceptor solar cells. However, these calculations are usually performed on small-size donor/acceptor complexes and as result do not account for electronic polarization effects. Here, using a pentacene/C60 complex as a model system, we discuss the ability of long-range corrected (LCR) hybrid functionals in combination with the polarizable continuum model (PCM) to determine the impact of the solid-state environment on the CT states. The CT energies are found to be insensitive to the interactions with the dielectric medium when a conventional time-dependent DFT/PCM (TDDFT/PCM) approach is used. However, a decrease in the energy of the CT state in the framework of LRC functionals can be obtained by using a smaller range-separated parameter when going from an isolated donor/acceptor complex to the solid-state case.

Passage from a pure state description to the microcanonical ...

Indian Academy of Sciences (India)

ensemble distribution (microcanonical distribution) has no memory of the initial state. In .... state is not erased as the subspace is still state-dependent and no statistical mechanics ... using in the present context, even for pure states, the entropy.

‘Neptune’ between ‘Hesperus’ and ‘Vulcan’: On descriptive names and non-existence

OpenAIRE

Arrieta Urtizberea, Agustín

2005-01-01

[EN]This work will focus on some aspects of descriptive names. The New Theory of Reference, in line with Kripke, takes descriptive names to be proper names. I will argue in this paper that descriptive names and certain theory in reference to them, even when it disagrees with the New Theory of Reference, can shed light on our understanding of (some) non-existence statements. I define the concept of descriptive name for hypothesised object (DNHO). My thesis being that DNHOs are, ...

Transport properties site descriptive model. Guidelines for evaluation and modelling

International Nuclear Information System (INIS)

Berglund, Sten; Selroos, Jan-Olof

2004-04-01

This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive modelling of

Electronic Excitations in Solution: The Interplay between State Specific Approaches and a Time-Dependent Density Functional Theory Description.

Science.gov (United States)

Guido, Ciro A; Jacquemin, Denis; Adamo, Carlo; Mennucci, Benedetta

2015-12-08

We critically analyze the performances of continuum solvation models when coupled to time-dependent density functional theory (TD-DFT) to predict solvent effects on both absorption and emission energies of chromophores in solution. Different polarization schemes of the polarizable continuum model (PCM), such as linear response (LR) and three different state specific (SS) approaches, are considered and compared. We show the necessity of introducing a SS model in cases where large electron density rearrangements are involved in the excitations, such as charge-transfer transitions in both twisted and quadrupolar compounds, and underline the very delicate interplay between the selected polarization method and the chosen exchange-correlation functional. This interplay originates in the different descriptions of the transition and ground/excited state multipolar moments by the different functionals. As a result, the choice of both the DFT functional and the solvent polarization scheme has to be consistent with the nature of the studied electronic excitation.

Empirical study on mutual fund objective classification.

Science.gov (United States)

Jin, Xue-jun; Yang, Xiao-lan

2004-05-01

Mutual funds are usually classified on the basis of their objectives. If the activities of mutual funds are consistent with their stated objectives, investors may look at the latter as signals of their risks and incomes. This work analyzes mutual fund objective classification in China by statistical methods of distance analysis and discriminant analysis; and examines whether the stated investment objectives of mutual funds adequately represent their attributes to investors. That is, if mutual funds adhere to their stated objectives, attributes must be heterogeneous between investment objective groups and homogeneous within them. Our conclusion is to some degree, the group of optimized exponential funds is heterogeneous to other groups. As a whole, there exist no significant differences between different objective groups; and 50% of mutual funds are not consistent with their objective groups.

Objective and Essential Elements of a State's Nuclear Security Regime. Nuclear Security Fundamentals (Chinese Edition)

International Nuclear Information System (INIS)

2014-01-01

The possibility that nuclear material or other radioactive material could be used for criminal purposes or intentionally used in an unauthorized manner cannot be ruled out in the current global situation. States have responded to this risk by engaging in a collective commitment to strengthen the protection and control of such material and to respond effectively to nuclear security events. States have agreed to strengthen existing instruments and have established new international legal instruments to enhance nuclear security worldwide. Nuclear security is fundamental in the management of nuclear technologies and in applications where nuclear material or other radioactive material is used or transported. Through its nuclear security programme, the IAEA supports States to establish, maintain and sustain an effective nuclear security regime. The IAEA has adopted a comprehensive approach to nuclear security. This recognizes that an effective national nuclear security regime builds on: the implementation of relevant international legal instruments; information protection; physical protection; material accounting and control; detection of and response to trafficking in such material; national response plans; and contingency measures. With its Nuclear Security Series, the IAEA aims to assist States in implementing and sustaining such a regime in a coherent and integrated manner. The IAEA Nuclear Security Series comprises: Nuclear Security Fundamentals, which include the objective and essential elements of a State's nuclear security regime; Recommendations; Implementing Guides; and Technical Guidance. Each State carries the full responsibility for nuclear security. Specifically, each State has the responsibility to provide for the security of nuclear material and other radioactive material and their associated facilities and activities; to ensure the security of such material in use, storage, or in transport; to combat illicit trafficking and the inadvertent movement of

Objective and Essential Elements of a State's Nuclear Security Regime. Nuclear Security Fundamentals (Arabic Edition)

International Nuclear Information System (INIS)

2014-01-01

The possibility that nuclear material or other radioactive material could be used for criminal purposes or intentionally used in an unauthorized manner cannot be ruled out in the current global situation. States have responded to this risk by engaging in a collective commitment to strengthen the protection and control of such material and to respond effectively to nuclear security events. States have agreed to strengthen existing instruments and have established new international legal instruments to enhance nuclear security worldwide. Nuclear security is fundamental in the management of nuclear technologies and in applications where nuclear material or other radioactive material is used or transported. Through its nuclear security programme, the IAEA supports States to establish, maintain and sustain an effective nuclear security regime. The IAEA has adopted a comprehensive approach to nuclear security. This recognizes that an effective national nuclear security regime builds on: the implementation of relevant international legal instruments; information protection; physical protection; material accounting and control; detection of and response to trafficking in such material; national response plans; and contingency measures. With its Nuclear Security Series, the IAEA aims to assist States in implementing and sustaining such a regime in a coherent and integrated manner. The IAEA Nuclear Security Series comprises: Nuclear Security Fundamentals, which include the objective and essential elements of a State's nuclear security regime; Recommendations; Implementing Guides; and Technical Guidance. Each State carries the full responsibility for nuclear security. Specifically, each State has the responsibility to provide for the security of nuclear material and other radioactive material and their associated facilities and activities; to ensure the security of such material in use, storage, or in transport; to combat illicit trafficking and the inadvertent movement of

Objective and Essential Elements of a State's Nuclear Security Regime. Nuclear Security Fundamentals (Spanish Edition)

International Nuclear Information System (INIS)

2014-01-01

The possibility that nuclear material or other radioactive material could be used for criminal purposes or intentionally used in an unauthorized manner cannot be ruled out in the current global situation. States have responded to this risk by engaging in a collective commitment to strengthen the protection and control of such material and to respond effectively to nuclear security events. States have agreed to strengthen existing instruments and have established new international legal instruments to enhance nuclear security worldwide. Nuclear security is fundamental in the management of nuclear technologies and in applications where nuclear material or other radioactive material is used or transported. Through its nuclear security programme, the IAEA supports States to establish, maintain and sustain an effective nuclear security regime. The IAEA has adopted a comprehensive approach to nuclear security. This recognizes that an effective national nuclear security regime builds on: the implementation of relevant international legal instruments; information protection; physical protection; material accounting and control; detection of and response to trafficking in such material; national response plans; and contingency measures. With its Nuclear Security Series, the IAEA aims to assist States in implementing and sustaining such a regime in a coherent and integrated manner. The IAEA Nuclear Security Series comprises: Nuclear Security Fundamentals, which include the objeurity Fundamentals, which include the objective and essential elements of a State's nuclear security regime; Recommendations; Implementing Guides; and Technical Guidance. Each State carries the full responsibility for nuclear security. Specifically, each State has the responsibility to provide for the security of nuclear material and other radioactive material and their associated facilities and activities; to ensure the security of such material in use, storage, or in transport; to combat illicit

Objective and Essential Elements of a State's Nuclear Security Regime. Nuclear Security Fundamentals (French Edition)

International Nuclear Information System (INIS)

2014-01-01

The possibility that nuclear material or other radioactive material could be used for criminal purposes or intentionally used in an unauthorized manner cannot be ruled out in the current global situation. States have responded to this risk by engaging in a collective commitment to strengthen the protection and control of such material and to respond effectively to nuclear security events. States have agreed to strengthen existing instruments and have established new international legal instruments to enhance nuclear security worldwide. Nuclear security is fundamental in the management of nuclear technologies and in applications where nuclear material or other radioactive material is used or transported. Through its nuclear security programme, the IAEA supports States to establish, maintain and sustain an effective nuclear security regime. The IAEA has adopted a comprehensive approach to nuclear security. This recognizes that an effective national nuclear security regime builds on: the implementation of relevant international legal instruments; information protection; physical protection; material accounting and control; detection of and response to trafficking in such material; national response plans; and contingency measures. With its Nuclear Security Series, the IAEA aims to assist States in implementing and sustaining such a regime in a coherent and integrated manner. The IAEA Nuclear Security Series comprises: Nuclear Security Fundamentals, which include the objective and essential elements of a State's nuclear security regime; Recommendations; Implementing Guides; and Technical Guidance. Each State carries the full responsibility for nuclear security. Specifically, each State has the responsibility to provide for the security of nuclear material and other radioactive material and their associated facilities and activities; to ensure the security of such material in use, storage, or in transport; to combat illicit trafficking and the inadvertent movement of

Historic Buildings and Modern Technology: The California State Library Remodels for Automation--A Case Study.

Science.gov (United States)

Hudson, Kathy

1987-01-01

Provides background on the California State Library, a description of the Library and Courts Building, and a summary of automation objectives. Concerns in renovation to accommodate a modern library are then discussed: (1) environment; (2) electrical and telephone circuitry; (3) data and voice communications; (4) physical factors; and (5)…

The OKS persistent in-memory object manager

International Nuclear Information System (INIS)

Jones, R.; Mapelli, L.; Soloviev, I.

1998-01-01

The OKS (Object Kernel Support) is a library to support a simple, active persistent in-memory object manager. It is suitable for applications which need to create persistent structured information with fast access but do not require full database functionality. It can be used as the frame of configuration databases and real-time object managers for Data Acquisition and Detector Control Systems in such fields as setup, diagnostics and general configuration description. OKS is based on an object model that supports objects, classes, associations, methods, inheritance, polymorphism, object identifiers, composite objects, integrity constraints, schema evolution, data migration and active notification. OKS stores the class definitions and their instances in portable ASCII files. It provides query facilities, including indices support. The OKS has a C++ API (Application Program Interface) and includes Motif based GUI applications to design class schema and to manipulate objects. OKS has been developed on top of the Rogue Wave Tools h++ C++ class library

Irreducible descriptive sets of attributes for information systems

KAUST Repository

Moshkov, Mikhail

2010-01-01

The maximal consistent extension Ext(S) of a given information system S consists of all objects corresponding to attribute values from S which are consistent with all true and realizable rules extracted from the original information system S. An irreducible descriptive set for the considered information system S is a minimal (relative to the inclusion) set B of attributes which defines exactly the set Ext(S) by means of true and realizable rules constructed over attributes from the considered set B. We show that there exists only one irreducible descriptive set of attributes. We present a polynomial algorithm for this set construction. We also study relationships between the cardinality of irreducible descriptive set of attributes and the number of attributes in S. The obtained results will be useful for the design of concurrent data models from experimental data. © 2010 Springer-Verlag.

A prospective descriptive study of the management of miscarriages ...

African Journals Online (AJOL)

Objective: To assess the current management of incomplete miscarriage at Harare and Parirenyatwa Hospitals and to determine the proportion of patients with incomplete miscarriage managed with Manual Vacuum Aspiration (MVA), sharp curettage or medical evacuation. Design: A prospective descriptive study.

Job Analysis, Job Descriptions, and Performance Appraisal Systems.

Science.gov (United States)

Sims, Johnnie M.; Foxley, Cecelia H.

1980-01-01

Job analysis, job descriptions, and performance appraisal can benefit student services administration in many ways. Involving staff members in the development and implementation of these techniques can increase commitment to and understanding of the overall objectives of the office, as well as communication and cooperation among colleagues.…

Microscopic description and excitation of unitary analog states

Energy Technology Data Exchange (ETDEWEB)

Kisslinger, L S [Carnegie-Mellon Univ., Pittsburgh, Pa. (USA); Van Giai, N [Paris-11 Univ., 91 - Orsay (France). Inst. de Physique Nucleaire

1977-12-05

A microscopic investigation in a self-consistent particle-hole model reveals approximate unitary analog states in spite of large symmetry breaking. The K-nucleus elastic scattering and (K/sup -/, ..pi../sup -/) excitation of these states are studied, showing strong surface effects.

78 FR 6817 - Clean Air Act Operating Permit Program; Petition for Objection to State Operating Permit for...

Science.gov (United States)

2013-01-31

... Wisconsin Public Service Corporation--JP Pulliam Plant. Pursuant to section 505(b)(2) of the Act, a... ENVIRONMENTAL PROTECTION AGENCY [FRL 9774-6] Clean Air Act Operating Permit Program; Petition for Objection to State Operating Permit for Wisconsin Public Service Corporation--JP Pulliam Plant AGENCY...

GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

Energy Technology Data Exchange (ETDEWEB)

PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

2002-05-31

THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Can state-of-the-art HVS-based objective image quality criteria be used for image reconstruction techniques based on ROI analysis?

Science.gov (United States)

Dostal, P.; Krasula, L.; Klima, M.

2012-06-01

Various image processing techniques in multimedia technology are optimized using visual attention feature of the human visual system. Spatial non-uniformity causes that different locations in an image are of different importance in terms of perception of the image. In other words, the perceived image quality depends mainly on the quality of important locations known as regions of interest. The performance of such techniques is measured by subjective evaluation or objective image quality criteria. Many state-of-the-art objective metrics are based on HVS properties; SSIM, MS-SSIM based on image structural information, VIF based on the information that human brain can ideally gain from the reference image or FSIM utilizing the low-level features to assign the different importance to each location in the image. But still none of these objective metrics utilize the analysis of regions of interest. We solve the question if these objective metrics can be used for effective evaluation of images reconstructed by processing techniques based on ROI analysis utilizing high-level features. In this paper authors show that the state-of-the-art objective metrics do not correlate well with subjective evaluation while the demosaicing based on ROI analysis is used for reconstruction. The ROI were computed from "ground truth" visual attention data. The algorithm combining two known demosaicing techniques on the basis of ROI location is proposed to reconstruct the ROI in fine quality while the rest of image is reconstructed with low quality. The color image reconstructed by this ROI approach was compared with selected demosaicing techniques by objective criteria and subjective testing. The qualitative comparison of the objective and subjective results indicates that the state-of-the-art objective metrics are still not suitable for evaluation image processing techniques based on ROI analysis and new criteria is demanded.

Representing Objects using Global 3D Relational Features for Recognition Tasks

DEFF Research Database (Denmark)

Mustafa, Wail

2015-01-01

representations. For representing objects, we derive global descriptors encoding shape using viewpoint-invariant features obtained from multiple sensors observing the scene. Objects are also described using color independently. This allows for combining color and shape when it is required for the task. For more...... robust color description, color calibration is performed. The framework was used in three recognition tasks: object instance recognition, object category recognition, and object spatial relationship recognition. For the object instance recognition task, we present a system that utilizes color and scale...

Industrial robots with sensors and object recognition systems

International Nuclear Information System (INIS)

Koehler, G.W.

1978-01-01

The previous development and the present status of industrial robots equipped with sensors and object recognition systems are described. This type of equipment allows flexible automation of many work stations in which industrial robots of the first generation, which are unable to react to changes in their respective environments automatically, apart from their being linked to other machines, could not be used because of the prevailing boundary conditions. A classification system facilitates an overview of the large number of technical solutions now available. The manifold possibilities of application of this equipment are demonstrated by a number of examples. As a result of the present state of development of the components required, and in view also of economic reasons, there is a trend towards special designs for a small number of specific purposes and towards stripped-down object recognition. systems with limited applications. A fitting description is offered of the term 'robot', which is now being used in various contexts, and an indication is made of the capabilities and components a machine to be called robot should have as a minimum. Finally, reference is made to some potential lines of development serving to reduce expediture and accelerate recognition processes. (orig.) [de

Hiding State in CλaSH Hardware Descriptions

NARCIS (Netherlands)

Gerards, Marco Egbertus Theodorus; Baaij, C.P.R.; Kuper, Jan; Kooijman, Matthijs

Synchronous hardware can be modelled as a mapping from input and state to output and a new state, such mappings are referred to as transition functions. It is natural to use a functional language to implement transition functions. The CaSH compiler is capable of translating transition functions to

75 FR 19968 - Clean Air Act Operating Permit Program; Petition for Objection to State Operating Permit for...

Science.gov (United States)

2010-04-16

... Objection to State Operating Permit for Public Service Company of Colorado--Hayden Station AGENCY... of Colorado dba Xcel Energy (Xcel)--Hayden Power Station. Pursuant to section 505(b)(2) of the Clean.... Additionally, the final order for Public Service Company of Colorado--Hayden Power Station, is available...

A multi-objective optimization problem for multi-state series-parallel systems: A two-stage flow-shop manufacturing system

International Nuclear Information System (INIS)

Azadeh, A.; Maleki Shoja, B.; Ghanei, S.; Sheikhalishahi, M.

2015-01-01

This research investigates a redundancy-scheduling optimization problem for a multi-state series parallel system. The system is a flow shop manufacturing system with multi-state machines. Each manufacturing machine may have different performance rates including perfect performance, decreased performance and complete failure. Moreover, warm standby redundancy is considered for the redundancy allocation problem. Three objectives are considered for the problem: (1) minimizing system purchasing cost, (2) minimizing makespan, and (3) maximizing system reliability. Universal generating function is employed to evaluate system performance and overall reliability of the system. Since the problem is in the NP-hard class of combinatorial problems, genetic algorithm (GA) is used to find optimal/near optimal solutions. Different test problems are generated to evaluate the effectiveness and efficiency of proposed approach and compared to simulated annealing optimization method. The results show the proposed approach is capable of finding optimal/near optimal solution within a very reasonable time. - Highlights: • A redundancy-scheduling optimization problem for a multi-state series parallel system. • A flow shop with multi-state machines and warm standby redundancy. • Objectives are to optimize system purchasing cost, makespan and reliability. • Different test problems are generated and evaluated by a unique genetic algorithm. • It locates optimal/near optimal solution within a very reasonable time

End-state comfort trumps handedness in object manipulation.

Science.gov (United States)

Coelho, Chase J; Studenka, Breanna E; Rosenbaum, David A

2014-04-01

A goal of research on human perception and performance is to explore the relative importance of constraints shaping action selection. The present study concerned the relative importance of two constraints that have not been directly contrasted: (1) the tendency to grasp objects in ways that afford comfortable or easy-to-control final postures; and (2) the tendency to grasp objects with the dominant rather than the nondominant hand. We asked participants to reach out and grasp a horizontal rod whose left or right end was to be placed into a target after a 90° rotation. In one condition, we told participants which hand to use and let them choose an overhand or underhand initial grasp. In another condition, we told participants which grasp to use and let them choose either hand. Participants sacrificed hand preference to perform the task in a way that ensured a comfortable or easy to control thumb-up posture at the time of object placement, indicating that comfort trumped handedness. A second experiment confirmed that comfort was indeed higher for thumb-down postures than thumb-up postures. A third experiment confirmed that the choice data could be linked to objective performance differences. The results point to the importance of identifying constraint weightings for action selection and support an account of hand selection that ascribes hand preference to sensitivity to performance differences. The results do not support the hypothesis that hand preference simply reflects a bias to use the dominant hand.

77 FR 58988 - Clean Air Act Operating Permit Program; Petition for Objection to State Operating Permit for...

Science.gov (United States)

2012-09-25

... Objection to State Operating Permit for Cheyenne Light, Fuel & Power, Wygen II Power Plant AGENCY... to Cheyenne Light, Fuel & Power (CLF&P) for their Wygen II power plant (Wygen II). Pursuant to... final Order, the Petition, and other supporting information. You may view the hard copies Monday through...

The Emergence of Objects from Mathematical Practices

Science.gov (United States)

Font, Vicenc; Godino, Juan D.; Gallardo, Jesus

2013-01-01

The nature of mathematical objects, their various types, the way in which they are formed, and how they participate in mathematical activity are all questions of interest for philosophy and mathematics education. Teaching in schools is usually based, implicitly or explicitly, on a descriptive/realist view of mathematics, an approach which is not…

A framework for efficient spatial web object retrieval

DEFF Research Database (Denmark)

Wu, Dinging; Cong, Gao; Jensen, Christian S.

2012-01-01

The conventional Internet is acquiring a geospatial dimension. Web documents are being geo-tagged and geo-referenced objects such as points of interest are being associated with descriptive text documents. The resulting fusion of geo-location and documents enables new kinds of queries that take...

Nature and origin of Herbig-Haro objects

International Nuclear Information System (INIS)

Schwartz, R.D.; Arizona Univ., Tucson)

1985-01-01

A brief description of the nature of Herbig-Haro nebulae is given, and the shock-wave origin of the nebulae is discussed. Kinematical evidence suggests that Herbig-Haro objects are ejected in bipolar flows from young stars. Evidence from infrared observations of the stars that excite Herbig-Haro objects is summarized; these stars appear to be T Tauri stars. The origin of these nebulae is discussed emphasizing energy required to power them, and a number of questions are posed pertaining to outflow mechanisms associated with the exciting stars

Water Resources Research Grant Program project descriptions, fiscal year 1987

Science.gov (United States)

,

1987-01-01

This report contains information on the 34 new projects funded by the United States Geological Survey 's Water Resources Research Grant Program in fiscal year 1987 and on 3 projects completed during the year. For the new projects, the report gives the grant number, project title, performing organization, principal investigator(s), and a project description that includes: (1) identification of water related problems and problem-solution approach (2) contribution to problem solution, (3) objectives, and (4) approach. The 34 projects include 12 in the area of groundwater quality problems, 12 in the science and technology of water quality management, 1 in climate variability and the hydrologic cycle, 4 in institutional change in water resources management, and 5 in surface water management. For the three completed projects, the report furnishes the grant number; project title; performing organization; principal investor(s); starting data; data of receipt of final report; and an abstract of the final report. Each project description provides the information needed to obtain a copy of the final report. The report contains tables showing: (1) proposals received according to area of research interest, (2) grant awards and funding according to area of research interest, (3) proposals received according to type of submitting organization, and (4) awards and funding according to type of organization. (Author 's abstract)

Real Objects Can Impede Conditional Reasoning but Augmented Objects Do Not.

Science.gov (United States)

Sato, Yuri; Sugimoto, Yutaro; Ueda, Kazuhiro

2018-03-01

In this study, Knauff and Johnson-Laird's (2002) visual impedance hypothesis (i.e., mental representations with irrelevant visual detail can impede reasoning) is applied to the domain of external representations and diagrammatic reasoning. We show that the use of real objects and augmented real (AR) objects can control human interpretation and reasoning about conditionals. As participants made inferences (e.g., an invalid one from "if P then Q" to "P"), they also moved objects corresponding to premises. Participants who moved real objects made more invalid inferences than those who moved AR objects and those who did not manipulate objects (there was no significant difference between the last two groups). Our results showed that real objects impeded conditional reasoning, but AR objects did not. These findings are explained by the fact that real objects may over-specify a single state that exists, while AR objects suggest multiple possibilities. Copyright © 2017 Cognitive Science Society, Inc.

30 CFR 250.272 - If a State objects to the DPP's or DOCD's coastal zone consistency certification, what can I do?

Science.gov (United States)

2010-07-01

... coastal zone consistency certification, what can I do? 250.272 Section 250.272 Mineral Resources MINERALS... objects to the DPP's or DOCD's coastal zone consistency certification, what can I do? If an affected State objects to the coastal zone consistency certification accompanying your proposed or disapproved DPP or...

Description of low-lying states in odd-odd deformed nuclei taking account of the coupling with core rotations and vibrations. 1

International Nuclear Information System (INIS)

Kvasil, J.; Hrivnacova, I.; Nesterenko, V.O.

1990-01-01

The microscopic approach for description of low-lyinig states in deformed odd-odd nuclei is formulated as a generalization of the quasiparticle-phonon model (QPM) with including the rotational degrees of freedom and n-p interaction between external nucleons into the QPM. In comparison with other models, the approach proposed includes all three the most important effects coupling with rotational and vibrational degrees of freedom of doubly-even core and p-n interaction mentioned above even treates them on the microscopic base. 36 refs

Improving Students' Achievement in Writing Descriptive Text by Using Movie Posters

OpenAIRE

Saleha, Ayu -; -, Sumarsih -

2014-01-01

This study concerns on Improving Students' Achievement in Writing Descriptive Text by Using Movie Posters. The underlying objective of this study is to investigate whether teaching descriptive by using movie posters potentially improves students' skill. The research was conducted by using Classroom Action Research (CAR). The subject of the research was class X of SMA SWASTA UTAMA MEDAN. The number of the students was 28. The procedure of the research was administrated into two cycles which ea...

Descriptive Research

DEFF Research Database (Denmark)

Wigram, Anthony Lewis

2003-01-01

Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

Receptive fields selection for binary feature description.

Science.gov (United States)

Fan, Bin; Kong, Qingqun; Trzcinski, Tomasz; Wang, Zhiheng; Pan, Chunhong; Fua, Pascal

2014-06-01

Feature description for local image patch is widely used in computer vision. While the conventional way to design local descriptor is based on expert experience and knowledge, learning-based methods for designing local descriptor become more and more popular because of their good performance and data-driven property. This paper proposes a novel data-driven method for designing binary feature descriptor, which we call receptive fields descriptor (RFD). Technically, RFD is constructed by thresholding responses of a set of receptive fields, which are selected from a large number of candidates according to their distinctiveness and correlations in a greedy way. Using two different kinds of receptive fields (namely rectangular pooling area and Gaussian pooling area) for selection, we obtain two binary descriptors RFDR and RFDG .accordingly. Image matching experiments on the well-known patch data set and Oxford data set demonstrate that RFD significantly outperforms the state-of-the-art binary descriptors, and is comparable with the best float-valued descriptors at a fraction of processing time. Finally, experiments on object recognition tasks confirm that both RFDR and RFDG successfully bridge the performance gap between binary descriptors and their floating-point competitors.

Model-based recognition of 3-D objects by geometric hashing technique

International Nuclear Information System (INIS)

Severcan, M.; Uzunalioglu, H.

1992-09-01

A model-based object recognition system is developed for recognition of polyhedral objects. The system consists of feature extraction, modelling and matching stages. Linear features are used for object descriptions. Lines are obtained from edges using rotation transform. For modelling and recognition process, geometric hashing method is utilized. Each object is modelled using 2-D views taken from the viewpoints on the viewing sphere. A hidden line elimination algorithm is used to find these views from the wire frame model of the objects. The recognition experiments yielded satisfactory results. (author). 8 refs, 5 figs

Hydrogeological Site Descriptive Model - a strategy for its development during Site Investigations

Energy Technology Data Exchange (ETDEWEB)

Rhen, Ingvar [SWECO VIAK AB, Goeteborg (Sweden); Follin, Sven [SF GeoLogic AB, Stockholm (Sweden); Hermanson, Jan [Golder Associates, Stockholm (Sweden)

2003-04-01

The report is to present a strategy for the development of the Site Descriptive Hydrogeological Model within the SKB Site Investigation Programme. The report, and similar reports from the Geology, Rock Mechanics, Thermal properties, Hydrogeochemistry, Transport Properties and Surface Ecosystem disciplines are intended to guide SKB Site Descriptive Modelling but also to provide the authorities with an overview of how the modelling should be performed. Thus the objectives of this report are to: provide guidelines for the modelling of different sites resulting in consistent handling of modelling issues during the Site Investigations, provide a structure for the modelling sequence that is suitable for the establishment of a Site Descriptive model and provide some necessary details that should be considered in a Site Descriptive model.

Hydrogeological Site Descriptive Model - a strategy for its development during Site Investigations

International Nuclear Information System (INIS)

Rhen, Ingvar; Follin, Sven; Hermanson, Jan

2003-04-01

The report is to present a strategy for the development of the Site Descriptive Hydrogeological Model within the SKB Site Investigation Programme. The report, and similar reports from the Geology, Rock Mechanics, Thermal properties, Hydrogeochemistry, Transport Properties and Surface Ecosystem disciplines are intended to guide SKB Site Descriptive Modelling but also to provide the authorities with an overview of how the modelling should be performed. Thus the objectives of this report are to: provide guidelines for the modelling of different sites resulting in consistent handling of modelling issues during the Site Investigations, provide a structure for the modelling sequence that is suitable for the establishment of a Site Descriptive model and provide some necessary details that should be considered in a Site Descriptive model

Objective Color Classification of Ecstasy Tablets by Hyperspectral Imaging

NARCIS (Netherlands)

Edelman, Gerda; Lopatka, Martin; Aalders, Maurice

2013-01-01

The general procedure followed in the examination of ecstasy tablets for profiling purposes includes a color description, which depends highly on the observers' perception. This study aims to provide objective quantitative color information using visible hyperspectral imaging. Both self-manufactured

Transmutation Fuel Campaign Description and Status

International Nuclear Information System (INIS)

Jon Carmack; Kemal O. Pasamehmetoglu

2008-01-01

This report contains a technical summary package in response to a Level 2 milestone in the transmutation fuel campaign (TFC) management work-package calling for input to the Secretarial decision. At present, the form of the Secretarial decision package is not fully defined, and it is not clear exactly what will be required from the TFC as a final input. However, it is anticipated that a series of technical and programmatic documents will need to be provided in support of a wider encompassing document on GNEP technology development activities. The TFC technical leadership team provides this report as initial input to the secretarial decision package which is being developed by the Technical Integration Office (TIO) in support of Secretarial decision. This report contains a summary of the TFC execution plan with a work breakdown structure, high level schedule, major milestones, and summary description of critical activities in support of campaign objectives. Supporting documents referenced in this report but provided under separate cover include: (1) An updated review of the state-of-the art for transmutation fuel development activities considering national as well as international fuel research and development testing activities. (2) A definition of the Technology Readiness Level (TRL) used to systematically define and execute the transmutation fuel development activities

A report to Congress on Nuclear Regulatory research: Project descriptions for FY87

International Nuclear Information System (INIS)

1987-02-01

The report presents project descriptions of NRC research projects funded in Fiscal Year 1987. The individual project descriptions presented in this report are divided into six major groups of related projects. These groups, called issues, are as follows: Severe Accident, Risk and Reliability, Thermal Hydraulic Transients, Plant Aging and Life Extension, Seismic Research, and Waste Management. Within each issue, the project descriptions are further divided into subgroups, called subissues. An overview is provided prior to each issue and subissue giving a statement of the problem being addressed and the research objectives

Fuzzy Multi-objective Linear Programming Approach

Directory of Open Access Journals (Sweden)

Amna Rehmat

2007-07-01

Full Text Available Traveling salesman problem (TSP is one of the challenging real-life problems, attracting researchers of many fields including Artificial Intelligence, Operations Research, and Algorithm Design and Analysis. The problem has been well studied till now under different headings and has been solved with different approaches including genetic algorithms and linear programming. Conventional linear programming is designed to deal with crisp parameters, but information about real life systems is often available in the form of vague descriptions. Fuzzy methods are designed to handle vague terms, and are most suited to finding optimal solutions to problems with vague parameters. Fuzzy multi-objective linear programming, an amalgamation of fuzzy logic and multi-objective linear programming, deals with flexible aspiration levels or goals and fuzzy constraints with acceptable deviations. In this paper, a methodology, for solving a TSP with imprecise parameters, is deployed using fuzzy multi-objective linear programming. An example of TSP with multiple objectives and vague parameters is discussed.

An Efficient Explicit-time Description Method for Timed Model Checking

Directory of Open Access Journals (Sweden)

Hao Wang

2009-12-01

Full Text Available Timed model checking, the method to formally verify real-time systems, is attracting increasing attention from both the model checking community and the real-time community. Explicit-time description methods verify real-time systems using general model constructs found in standard un-timed model checkers. Lamport proposed an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables to model time requirements. Two methods, the Sync-based Explicit-time Description Method using rendezvous synchronization steps and the Semaphore-based Explicit-time Description Method using only one global variable were proposed; they both achieve better modularity than Lamport's method in modeling the real-time systems. In contrast to timed automata based model checkers like UPPAAL, explicit-time description methods can access and store the current time instant for future calculations necessary for many real-time systems, especially those with pre-emptive scheduling. However, the Tick process in the above three methods increments the time by one unit in each tick; the state spaces therefore grow relatively fast as the time parameters increase, a problem when the system's time period is relatively long. In this paper, we propose a more efficient method which enables the Tick process to leap multiple time units in one tick. Preliminary experimental results in a high performance computing environment show that this new method significantly reduces the state space and improves both the time and memory efficiency.

23 CFR 657.7 - Objective.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Objective. 657.7 Section 657.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS CERTIFICATION OF SIZE AND WEIGHT ENFORCEMENT § 657.7 Objective. The objective of this regulation is the development and operation by each State...

Project «Zero Failure Level». Organization, State, Tasks

International Nuclear Information System (INIS)

Ugryumov, A.

2015-01-01

This paper starts with description of organizational actions and structure of the project. Tree of failures - hierarchical list; VVER-1000 FA failure main features like: change of geometrical form; mechanical damage; leaking FA and post irradiation examination of leaking fuel assemblies VVER-1000 are also presented. At the end author concluded that: 1) Organizational and technical actions are completed. 2) Significant part of works per stage «Determination of current state» is fulfilled. 3) Systematic cause of the main feature of failure – leaking of FA- is the debris damage of fuel rod cladding with foreign objects. 4) It is important to equip NPPs with modern means of FA inspection and means of extraction of foreign objects

Teaching Descriptive Writing through Visualization and the Five Senses

Science.gov (United States)

Carter, Katherine

2015-01-01

The descriptive paragraph and subsequent essay are usually among the first assignments students must complete in composition classes. Typically, students are told to describe their childhood home, a person of importance, a special object, or a summer vacation. Most students, especially learners of English as a foreign language (EFL), have…

Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

Directory of Open Access Journals (Sweden)

جواد رنجبر

2009-12-01

Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

Directory of Open Access Journals (Sweden)

Ida Ayu Mega Cahyani

2018-03-01

Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

Visual object recognition and category-specificity

DEFF Research Database (Denmark)

Gerlach, Christian

This thesis is based on seven published papers. The majority of the papers address two topics in visual object recognition: (i) category-effects at pre-semantic stages, and (ii) the integration of visual elements into elaborate shape descriptions corresponding to whole objects or large object parts...... (shape configuration). In the early writings these two topics were examined more or less independently. In later works, findings concerning category-effects and shape configuration merge into an integrated model, termed RACE, advanced to explain category-effects arising at pre-semantic stages in visual...... in visual long-term memory. In the thesis it is described how this simple model can account for a wide range of findings on category-specificity in both patients with brain damage and normal subjects. Finally, two hypotheses regarding the neural substrates of the model's components - and how activation...

A Descriptive Analysis of Tactical Casualty Care Interventions Performed by Law Enforcement Personnel in the State of Wisconsin, 2010-2015.

Science.gov (United States)

Stiles, Chad M; Cook, Christopher; Sztajnkrycer, Matthew D

2017-06-01

Introduction Based upon military experience, law enforcement has developed guidelines for medical care during high-threat conditions. The purpose of the current study was to provide a descriptive analysis of reported outcomes of law enforcement medical interventions. This was a descriptive analysis of a convenience sample of cases submitted to the Wisconsin Tactical Medicine Initiative (Wisconsin USA), after the provision of successful patient care, between January 2010 and December 2015. The study was reviewed by the Mayo Foundation Institutional Review Board (Rochester, Minnesota USA) and deemed exempt. Nineteen agencies submitted information during the study period. Of the 56 episodes of care reported, four (7.1%) cases involved care provided to injured officers while 52 (92.9%) involved care to injured civilians, including suspects. In at least two cases, on-going threats existed during the provision of medical care to an injured civilian. Law enforcement rendered care prior to Emergency Medical Services (EMS) arrival in all but two cases. The current case series demonstrates the life-saving potential for law enforcement personnel trained and equipped under current Tactical Combat Casualty Care (TCCC)/ Committee on Tactical Emergency Casualty Care (C-TECC) tactical casualty care guidelines. Although originally developed to save the lives of wounded combat personnel, in the civilian sector, the training appears more likely to save victims rather than law enforcement personnel. Stiles CM , Cook C , Sztajnkrycer MD . A descriptive analysis of tactical casualty care interventions performed by law enforcement personnel in the State of Wisconsin, 2010-2015. Prehosp Disaster Med. 2017;32(3):284-288.

Modelling and description of PHEBUS FPT1 experiment with the computer code ASTEC

International Nuclear Information System (INIS)

Tusheva, P.; Kalchev, B.

2005-01-01

The PHEBUS Fission Product (FP) programme was initiated in 1988 after major severe reactor accidents (at Three Mile Island and Chernobyl). The main objective of the programme is to study the release, transport and retention of fission products in an in-pile facility under severe accident conditions in a LWR. This paper covers the FPT 1 experiment description and modelling by the ASTEC code. The main calculated events, the temperature evolution at the middle part of the test bundle, the state of the bundle degradation at the end of calculation and the calculated Hydrogen production are presented and discussed. The obtained results from the ASTEC code calculation show a good agreement between experimental and calculated results. The calculated Hydrogen production is slightly overestimated in comparison with the experimental results

Near-infrared H2 emission from Herbig-Haro objects. I. A survey of low excitation objects

International Nuclear Information System (INIS)

Schwartz, R.D.; Cohen, M.; Williams, P.M.

1987-01-01

A survey for H 2 1-0 S(1) emission in 16 Herbig-Haro (HH) objects and three exciting stars for HH objects is reported. Eleven HH objects which show low-excitation optical spectra exhibit H 2 emission. One object (HH 43) is more than twice as bright as any previously reported HH object. In addition, spectra in the range 1.6-2.55 microns are reported for HH 43 and HH 120, and a 2.0-2.55 micron spectrum is presented for HH 26. The spectra yield estimates of the H 2 density and temperature ranges in these objects. The role of ultraviolet H 2 emission-line fluorescence in HH 43 with respect to cascading among excited vibrational states of the ground electronic state is discussed. Models which may account for the combined ultraviolet, optical, and near-IR spectra of HHs are briefly analyzed. 35 references

XML Diagnostics Description Standard

International Nuclear Information System (INIS)

Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

2006-01-01

A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

37 CFR 2.72 - Amendments to description or drawing of the mark.

Science.gov (United States)

2010-07-01

... drawing of the mark. 2.72 Section 2.72 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND....72 Amendments to description or drawing of the mark. (a) In an application based on use in commerce under section 1(a) of the Act, the applicant may amend the description or drawing of the mark only if...

Fiscal Year 1986 Technical Objective Document (TOD).

Science.gov (United States)

1986-03-01

abilties superior to other IR and manual turrets. - START DATE: FY 88 END DATE: FY 90" PROJECT TITLE: COMPOSITE METAL FIRES EE 62:06 JON: 2673XXXX...TECHNOLOGY: FIRE ELEMENT: INTERACTION DESCRIPTION (TECHNICAL OBJECTIVE) Evaluate a new series of agents "BORALONS" capable of extinguishing metal fires and...PROJECT TITLE: COMPOSITE METAL FIRES PE: 63723 JON: 2104XXXX

Object 'Ukryttya' 1986-2006

International Nuclear Information System (INIS)

Klyuchnikov, A.A.; Krasnov, V.A.; Rud'ko, V.M.; Shcherbin, V.N.

2006-01-01

This monograph summarizes the materials pertaining to 'Ukryttya' Object state. The results of researches of fuel containing materials conditions and of forecast of their future behavior are demonstrated, aerosol characterizations, mechanisms of production of liquid radioactive waste, radiation conditions at SO industrial site and NSC assembly site, as well as analysis of 'Ukryttya' Objects environmental impact, are performed. The conditions of 'Ukryttya' Object building structures are described. Preparation and realization of international projects for conversion of 'Ukryttya' Object into an ecologically safe system, including the 'Ukryttya' Implementation Plan (SIP), are considered

75 FR 66419 - Culturally Significant Objects Imported for Exhibition Determinations: “Object of Devotion...

Science.gov (United States)

2010-10-28

... Determinations: ``Object of Devotion: Medieval English Alabaster Sculpture From the Victoria and Albert Museum... Devotion: Medieval English Alabaster Sculpture from the Victoria and Albert Museum,'' imported from abroad for temporary exhibition within the United States, are of cultural significance. The objects are...

Olkiluoto site description 2006

International Nuclear Information System (INIS)

Andersson, J.; Ahokas, H.; Hudson, J.A.

2007-03-01

This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

Quantum logical description of microsystems

International Nuclear Information System (INIS)

Stachow, E.-W.

1984-01-01

An abstract object language with respect to single microsystems and its pragmatic foundation are considered in a systematic way. The quantum physical restrictions of local operations of a speaker lead to a propositional language which, under certain conditions, can be referred to an individual microsystem. The time dependence of the propositions according to the measuring process is discussed. Finally the language is extended to a space-time description of microsystems. Hereby relativity imposes certain constraints on the validi ty regions of propositions in space-time. Via realization, the language establishes the essential features of quantum physics in Hilbert space. (author)

Crossref an update on article level linking and digital object identifiers

CERN Multimedia

2002-01-01

Description of the CrossRef initiative, "an independent non-profit membership organization that was established by the publishing community to permit article linking based on digital object identifiers (DOIs)" (1 page).

System Design Description PFP Thermal Stabilization

International Nuclear Information System (INIS)

RISENMAY, H.R.

2000-01-01

The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures

Reporting Experiments in Homeopathic Basic Research—Description of the Checklist Development

Directory of Open Access Journals (Sweden)

B. Stock-Schröer

2011-01-01

Full Text Available The objective of this study was to develop a criteria catalogue serving as a guideline for authors to improve quality of reporting experiments in basic research in homeopathy. A Delphi Process was initiated including three rounds of adjusting and phrasing plus two consensus conferences. European researchers who published experimental work within the last 5 years were involved. A checklist for authors provide a catalogue with 23 criteria. The “Introduction” should focus on underlying hypotheses, the homeopathic principle investigated and state if experiments are exploratory or confirmatory. “Materials and methods” should comprise information on object of investigation, experimental setup, parameters, intervention and statistical methods. A more detailed description on the homeopathic substances, for example, manufacture, dilution method, starting point of dilution is required. A further result of the Delphi process is to raise scientists' awareness of reporting blinding, allocation, replication, quality control and system performance controls. The part “Results” should provide the exact number of treated units per setting which were included in each analysis and state missing samples and drop outs. Results presented in tables and figures are as important as appropriate measures of effect size, uncertainty and probability. “Discussion” in a report should depict more than a general interpretation of results in the context of current evidence but also limitations and an appraisal of aptitude for the chosen experimental model. Authors of homeopathic basic research publications are encouraged to apply our checklist when preparing their manuscripts. Feedback is encouraged on applicability, strength and limitations of the list to enable future revisions.

AN ANALYSIS OF STUDENT‘S DESCRIPTIVE TEXT: SYSTEMIC FUNCTIONAL LINGUISTICS PERSPECTIVES

Directory of Open Access Journals (Sweden)

Rizka Maulina Wulandari

2017-12-01

Full Text Available In Indonesia where different languages co-exist, and where English is used as a foreign language, the learners‘ capabilities in writing toward English plays an important role in formulating effective learning method. This descriptive qualitative research aimed to investigate the student‘s errors in writing descriptive text in SFL perspectives. A secondary, yet important, objective of this research is also to design the appropriate pedagogical plans that can be used for junior high school students in Indonesian education based on the result of the research. The results indicated that the student has good control about the schematic structure of descriptive text although many of his idea still uses Indonesian context which make the reader can be confused in understanding his meaning. It can be concluded that there is intervention from L1, that is Indonesian language, while he wrote his descriptive text.. Hence, the study highlighted that cooperative learning could be an option as an appropriate learning method to solve the students problem on writing descriptive text.

Linguistic approach to object recognition by grasping

Energy Technology Data Exchange (ETDEWEB)

Marik, V

1982-01-01

A method for recognizing both the three-dimensional object shapes and their sizes by grasping them with an antropomorphic five-finger artificial hand is described. The hand is equipped with position sensing elements in the joints of the fingers and with a tactile transducer net on the palm surface. The linguistic method uses formal grammars and languages for the pattern description. The recognition is hierarchically arranged, every level being different from the others by a formal language which has been used. On every level the pattern description is generated and verified from the symmetrical and semantical points of view. The results of the implementation of the recognition of cones, pyramides, spheres, prisms and cylinders are presented and discussed. 8 references.

FUNCTIONAL DISABILITY IN EARLY RHEUMATOID-ARTHRITIS - DESCRIPTION AND RISK-FACTORS

NARCIS (Netherlands)

GUILLEMIN, F; SUURMEIJER, T; KROL, B; BOMBARDIER, C; BRIANCON, S; DOEGLAS, D; SANDERMAN, R; VANDENHEUVEL, W

Objective. To provide a description and identify risk factors for functional disability in early rheumatoid arthritis (RA). Methods. A cohort of 337 patients with early RA with disease duration under 5 years was constituted in 2 areas in Fiance and The Netherlands. Examination included the Ritchie

YUCCA MOUNTAIN SITE DESCRIPTION

International Nuclear Information System (INIS)

Simmons, A.M.

2004-01-01

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

Science.gov (United States)

Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

2016-09-01

Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

Construction of the descriptive system for the Assessment of Quality of Life AQoL-6D utility instrument.

Science.gov (United States)

Richardson, Jeffrey R J; Peacock, Stuart J; Hawthorne, Graeme; Iezzi, Angelo; Elsworth, Gerald; Day, Neil A

2012-04-17

Multi attribute utility (MAU) instruments are used to include the health related quality of life (HRQoL) in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL)-6D, MAU instrument. The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM) to meet these dual requirements. The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs.

The influence of object relative size on priming and explicit memory.

Science.gov (United States)

Uttl, Bob; Graf, Peter; Siegenthaler, Amy L

2008-09-01

We investigated the effects of object relative size on priming and explicit memory for color photos of common objects. Participants were presented with color photos of pairs of objects displayed in either appropriate or inappropriate relative sizes. Implicit memory was assessed by speed of object size ratings whereas explicit memory was assessed by an old/new recognition test. Study-to-test changes in relative size reduced both priming and explicit memory and had large effects for objects displayed in large vs. small size at test. Our findings of substantial size-specific influences on priming with common objects under some but not other conditions are consistent with instance views of object perception and priming but inconsistent with structural description views.

ZLIB++: Object-oriented numerical library for differential algebra

International Nuclear Information System (INIS)

Malitsky, N.; Reshetov, A.; Yan, Y.

1994-01-01

New software engineering tools and object-oriented design have a great impact on the software development process. But in high energy physics all major packages were implemented in FORTRAN and porting of these codes to another language is rather complicated, primarily because of their huge size and heavy use of FORTRAN mathematical libraries. But some intrinsic accelerator concepts, such as nested structure of modern accelerators, look very pretty when implemented with the object-oriented approach. In this paper we present the object-oriented version of ZLIB, numerical library for differential algebra and show how the modern approaches can simplify the development and support of accelerator codes, decrease code size, and allow description of complex mathematical transformations by simple language

Reaction Hamiltonian and state-to-state description of chemical reactions

International Nuclear Information System (INIS)

Ruf, B.A.; Kresin, V.Z.; Lester, W.A. Jr.

1985-08-01

A chemical reaction is treated as a quantum transition from reactants to products. A specific reaction Hamiltonian (in second quantization formalism) is introduced. The approach leads to Franck-Condon-like factor, and adiabatic method in the framework of the nuclear motion problems. The influence of reagent vibrational state on the product energy distribution has been studied following the reaction Hamiltonian method. Two different cases (fixed available energy and fixed translational energy) are distinguished. Results for several biomolecular reactions are presented. 40 refs., 5 figs

Observing Participating Observation—A Re-description Based on Systems Theory

Directory of Open Access Journals (Sweden)

Tina Bering Keiding

2010-09-01

Full Text Available Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming a participant and, as such, co-producer of the observed phenomenon. There is no such thing as a neutral or objective description. As observation deals with differences and process meaning, all descriptions are re-constructions and interpretations of the observed. Hence, the idea of neutral descriptions as well as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation. URN: urn:nbn:de:0114-fqs1003119

MONRATE, a descriptive tool for calculation and prediction of re ...

African Journals Online (AJOL)

The objective of the study was to develop an interactive and systematic descriptive tool, MONRATE for calculating and predicting reinfection rates and time of Ascaris lumbricoides following mass chemotherapy using levamisole. Each pupil previously treated was retreated 6 or 7 months after the initial treatment in Ogun ...

Description of deformed nuclei in the sdg boson model

Energy Technology Data Exchange (ETDEWEB)

Li, S.C. [Australian National Univ., Canberra, ACT (Australia). Research School of Physical Sciences; Kuyucak, S. [Australian National Univ., Canberra, ACT (Australia). Research School of Physical Sciences

1996-07-15

We present a study of deformed nuclei in the framework of the sdg interacting boson model utilizing both numerical diagonalization and analytical 1/N expansion techniques. The focus is on the description of high-spin states which have recently become computationally accessible through the use of computer algebra in the 1/N expansion formalism. A systematic study is made of high-spin states in rare-earth and actinide nuclei. (orig.).

Description of deformed nuclei in the sdg boson model

Science.gov (United States)

Li, S. C.; Kuyucak, S.

1996-02-01

We present a study of deformed nuclei in the framework of the sdg interacting boson model utilizing both numerical diagonalization and analytical {1}/{N} expansion techniques. The focus is on the description of high-spin states which have recently become computationally accessible through the use of computer algebra in the {1}/{N} expansion formalism. A systematic study is made of high-spin states in rare-earth and actinide nuclei.

Description of deformed nuclei in the sdg boson model

International Nuclear Information System (INIS)

Li, S.C.; Kuyucak, S.

1996-01-01

We present a study of deformed nuclei in the framework of the sdg interacting boson model utilizing both numerical diagonalization and analytical 1/N expansion techniques. The focus is on the description of high-spin states which have recently become computationally accessible through the use of computer algebra in the 1/N expansion formalism. A systematic study is made of high-spin states in rare-earth and actinide nuclei. (orig.)

Quantum theory as a description of robust experiments: Derivation of the Pauli equation

Energy Technology Data Exchange (ETDEWEB)

De Raedt, Hans [Department of Applied Physics, Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, NL-9747AG Groningen (Netherlands); Katsnelson, Mikhail I.; Donker, Hylke C. [Radboud University Nijmegen, Institute for Molecules and Materials, Heyendaalseweg 135, NL-6525AJ Nijmegen (Netherlands); Michielsen, Kristel, E-mail: k.michielsen@fz-juelich.de [Institute for Advanced Simulation, Jülich Supercomputing Centre, Forschungszentrum Jülich, D-52425 Jülich (Germany); RWTH Aachen University, D-52056 Aachen (Germany)

2015-08-15

It is shown that the Pauli equation and the concept of spin naturally emerge from logical inference applied to experiments on a charged particle under the conditions that (i) space is homogeneous (ii) the observed events are logically independent, and (iii) the observed frequency distributions are robust with respect to small changes in the conditions under which the experiment is carried out. The derivation does not take recourse to concepts of quantum theory and is based on the same principles which have already been shown to lead to e.g. the Schrödinger equation and the probability distributions of pairs of particles in the singlet or triplet state. Application to Stern–Gerlach experiments with chargeless, magnetic particles, provides additional support for the thesis that quantum theory follows from logical inference applied to a well-defined class of experiments. - Highlights: • The Pauli equation is obtained through logical inference applied to robust experiments on a charged particle. • The concept of spin appears as an inference resulting from the treatment of two-valued data. • The same reasoning yields the quantum theoretical description of neutral magnetic particles. • Logical inference provides a framework to establish a bridge between objective knowledge gathered through experiments and their description in terms of concepts.

A description of the roles, activities, and skills of clinical nurse specialists in the United States.

Science.gov (United States)

Scott, R A

1999-07-01

Clinical nurse specialists (CNSs) frequently adapt to meet the challenging and changing needs of patients, families, nurses, physicians, and institutions, thus creating an advance practice role that is problematic in definition and description. The two dilemmas associated with CNSs have been role confusion and ambiguity, and the inability to explicate CNSs' value in economic terms. The purpose of this study was to describe the roles, activities, skills, and the cost-saving and revenue-generating activities of Master's-prepared nurses who function in traditional CNS roles in the United States. A descriptive research design was employed, using Role Theory as a framework to guide the study. The tool used to measure CNS practice included a 68-item instrument. It was pretested and used in two pilot studies. Content validity was supported by three experienced CNSs who were, at the time, in a doctoral nursing program. Instrument reliability was 0.89. Surveys were mailed to all individuals who subscribed (n = 2379) to the Clinical Nurse Specialist Journal. From the convenience sample, 724 CNSs participated, providing a margin of error of +/- 4 percentage points with a 99% confidence level. Regarding the five role components, CNSs reported (listed from most frequently to least frequently) spending time in the role of expert practitioner, educator, consultant, administrator, and researcher. Most of the activities listed in each of the roles were typical of CNS practice. Of the advanced practice roles, the two with the most surprising results were the expert practitioner and administrator roles. The results indicated a trend toward performing advanced skills that have been in the past considered solely medical practice and toward increasing administrative responsibilities. A small number of CNSs were able to identify cost-saving and revenue-generating activities, including the monetary value of the activity.

A Study of the Development of Students' Visualizations of Program State during an Elementary Object-Oriented Programming Course

Science.gov (United States)

Sajaniemi, Jorma; Kuittinen, Marja; Tikansalo, Taina

2008-01-01

Students' understanding of object-oriented (OO) program execution was studied by asking students to draw a picture of a program state at a specific moment. Students were given minimal instructions on what to include in their drawings in order to see what they considered to be central concepts and relationships in program execution. Three drawing…

Unified Modeling Language description of the object-oriented multi-scale adaptive finite element method for Step-and-Flash Imprint Lithography Simulations

International Nuclear Information System (INIS)

Paszynski, Maciej; Gurgul, Piotr; Sieniek, Marcin; Pardo, David

2010-01-01

In the first part of the paper we present the multi-scale simulation of the Step-and-Flash Imprint Lithography (SFIL), a modern patterning process. The simulation utilizes the hp adaptive Finite Element Method (hp-FEM) coupled with Molecular Statics (MS) model. Thus, we consider the multi-scale problem, with molecular statics applied in the areas of the mesh where the highest accuracy is required, and the continuous linear elasticity with thermal expansion coefficient applied in the remaining part of the domain. The degrees of freedom from macro-scale element's nodes located on the macro-scale side of the interface have been identified with particles from nano-scale elements located on the nano-scale side of the interface. In the second part of the paper we present Unified Modeling Language (UML) description of the resulting multi-scale application (hp-FEM coupled with MS). We investigated classical, procedural codes from the point of view of the object-oriented (O-O) programming paradigm. The discovered hierarchical structure of classes and algorithms makes the UML project as independent on the spatial dimension of the problem as possible. The O-O UML project was defined at an abstract level, independent on the programming language used.

A descriptive model of resting-state networks using Markov chains.

Science.gov (United States)

Xie, H; Pal, R; Mitra, S

2016-08-01

Resting-state functional connectivity (RSFC) studies considering pairwise linear correlations have attracted great interests while the underlying functional network structure still remains poorly understood. To further our understanding of RSFC, this paper presents an analysis of the resting-state networks (RSNs) based on the steady-state distributions and provides a novel angle to investigate the RSFC of multiple functional nodes. This paper evaluates the consistency of two networks based on the Hellinger distance between the steady-state distributions of the inferred Markov chain models. The results show that generated steady-state distributions of default mode network have higher consistency across subjects than random nodes from various RSNs.

40 CFR 70.4 - State program submittals and transition.

Science.gov (United States)

2010-07-01

... description in narrative form of the scope, structure, coverage, and processes of the State program. (ii) A description of the organization and structure of the agency or agencies that will have responsibility for... strategies). (5) A complete description of the State's compliance tracking and enforcement program or...

Description of disintegration in a three-body system

CERN Document Server

Takibaev, N Z

2000-01-01

In the frame of approach based on the effective potential of interaction between constituents, description of inelastic transition, in particularly, the processes of system disintegration. Relationship is shown between the approach results and those of the theory of final state interaction where coefficients of reaction gaining factor are determined. (author)

Object orientation affects spatial language comprehension.

Science.gov (United States)

Burigo, Michele; Sacchi, Simona

2013-01-01

Typical spatial descriptions, such as "The car is in front of the house," describe the position of a located object (LO; e.g., the car) in space relative to a reference object (RO) whose location is known (e.g., the house). The orientation of the RO affects spatial language comprehension via the reference frame selection process. However, the effects of the LO's orientation on spatial language have not received great attention. This study explores whether the pure geometric information of the LO (e.g., its orientation) affects spatial language comprehension using placing and production tasks. Our results suggest that the orientation of the LO influences spatial language comprehension even in the absence of functional relationships. Copyright © 2013 Cognitive Science Society, Inc.

Dissociative State and Competence

Directory of Open Access Journals (Sweden)

Yu-Ju Lin

2007-10-01

Full Text Available This report presents the results of forensic evaluation of the civil competence of a case of alleged dissociative identity disorder (DID and discusses whether such dissociative states substantially jeopardize civil competence. A 40-year-old woman claimed that she had had many personalities since her college days. From the age of 37 to 40, she shopped excessively, which left her with millions of dollars of debt. She ascribed her shopping to a certain identity state, over which she had no control. (In this article, we use the term identity state to replace personality as an objective description of a mental state. She thus raised the petition of civil incompetence. During the forensic evaluation, it was found that the identity states were relatively stable and mutually aware of each other. The switch into another identity state was sometimes under voluntary control. The subject showed consistency and continuity in behavioral patterns across the different identity states, and no matter which identity state she was in, there was no evidence of impairment in her factual knowledge of social situations and her capacity for managing personal affairs. We hence concluded that she was civilly competent despite the claimed DID. Considering that the existence and diagnosis of DID are still under dispute and a diagnosis of DID alone is not sufficient to interdict a person's civil right, important clinical and forensic issues remain to be answered.

Robust Object Tracking Using Valid Fragments Selection.

Science.gov (United States)

Zheng, Jin; Li, Bo; Tian, Peng; Luo, Gang

Local features are widely used in visual tracking to improve robustness in cases of partial occlusion, deformation and rotation. This paper proposes a local fragment-based object tracking algorithm. Unlike many existing fragment-based algorithms that allocate the weights to each fragment, this method firstly defines discrimination and uniqueness for local fragment, and builds an automatic pre-selection of useful fragments for tracking. Then, a Harris-SIFT filter is used to choose the current valid fragments, excluding occluded or highly deformed fragments. Based on those valid fragments, fragment-based color histogram provides a structured and effective description for the object. Finally, the object is tracked using a valid fragment template combining the displacement constraint and similarity of each valid fragment. The object template is updated by fusing feature similarity and valid fragments, which is scale-adaptive and robust to partial occlusion. The experimental results show that the proposed algorithm is accurate and robust in challenging scenarios.

Life science research objectives and representative experiments for the space station

Science.gov (United States)

Johnson, Catherine C. (Editor); Arno, Roger D. (Editor); Mains, Richard (Editor)

1989-01-01

A workshop was convened to develop hypothetical experiments to be used as a baseline for space station designer and equipment specifiers to ensure responsiveness to the users, the life science community. Sixty-five intra- and extramural scientists were asked to describe scientific rationales, science objectives, and give brief representative experiment descriptions compatible with expected space station accommodations, capabilities, and performance envelopes. Experiment descriptions include hypothesis, subject types, approach, equipment requirements, and space station support requirements. The 171 experiments are divided into 14 disciplines.

Clean Coal Technology: Region 4 Market Description, South Atlantic

International Nuclear Information System (INIS)

1993-09-01

The Region 4 Market Description Summary provides information that can be used in developing an understanding of the potential markets for clean coal technologies (CCTs) in the South Atlantic Region. This region (which geographically is Federal Region 4) consists of the following eight states: Alabama, Florida, Georgia, Kentucky, Mississippi, North Carolina, South Carolina, and Tennessee. In order to understand the potential market. A description is provided of the region's energy use, power generation capacity, and potential growth. Highlights of state government activities that could have a bearing on commercial deployment of CCTs are also presented. The potential markets characterized in this summary center on electric power generation by investor-owned, cooperative, and municipal electric utilities and involve planned new capacity additions and actions taken by utilities to comply with Phases I and II of the Clean Air Act Amendments (CAAA) of 1990. Regulations, policies, utility business strategies, and organizational changes that could impact the role of CCTs as a utility option are identified and discussed. The information used to develop the Region 4 Market Description is based mainly on an extensive review of plans and annual reports of 29 investor-owned, cooperative, and municipal coal-using electric utilities and public information on strategies and actions for complying with the CAAA of 1990

A Framework for the Flexible Content Packaging of Learning Objects and Learning Designs

Science.gov (United States)

Lukasiak, Jason; Agostinho, Shirley; Burnett, Ian; Drury, Gerrard; Goodes, Jason; Bennett, Sue; Lockyer, Lori; Harper, Barry

2004-01-01

This paper presents a platform-independent method for packaging learning objects and learning designs. The method, entitled a Smart Learning Design Framework, is based on the MPEG-21 standard, and uses IEEE Learning Object Metadata (LOM) to provide bibliographic, technical, and pedagogical descriptors for the retrieval and description of learning…

Frequency and spatial distribution of animal and object hoarder behavior in Curitiba, Paraná State, Brazil

Directory of Open Access Journals (Sweden)

Graziela Ribeiro da Cunha

Full Text Available Abstract: This study aimed to establish the frequency and spatial distribution of animal and object hoarding in Curitiba (Paraná State, the eighth most populous city in Brazil. All hoarding complaints received by the City Secretaries of Health, Environment and Social Assistance between September 2013 and April 2015 were collected (n = 226 and suspicious cases were individually investigated. A total of 113/226 (50% of complaints were confirmed as hoarding cases, representing an overall ratio of 6.45 cases per 100,000 inhabitants in Curitiba, of which 48/113 (42.5% involved object hoarders, 41/113 (36.3% animal hoarders and 24/113 (21.2% both animal and object hoarders. A correlation of total identified cases with neighborhood population density and all population stratums analyzed (total, gender, age was significantly positive (p < 0.01, and with neighborhood mean monthly income (r = -0.2; p = 0.03 significantly negative. A spatial cluster of cases was found in the north of the city (OR = 8.57; p < 0.01. Hoarding cases were relatively frequent in Curitiba and were associated with population distribution patterns and inversely related to neighborhood income.

Entropy of N=2 black holes and their M-brane description

International Nuclear Information System (INIS)

Behrndt, K.; Mohaupt, T.

1997-01-01

In this paper we discuss the M-brane description for an N=2 black hole. This solution is a result of the compactification of M-5-brane configurations over a Calabi-Yau threefold with arbitrary intersection numbers C ABC . In analogy with the D-brane description where one counts open string states we count here open M-2-branes which end on the M-5-brane. copyright 1997 The American Physical Society

Strategies for human-driven robot comprehension of spatial descriptions by older adults in a robot fetch task.

Science.gov (United States)

Carlson, Laura; Skubic, Marjorie; Miller, Jared; Huo, Zhiyu; Alexenko, Tatiana

2014-07-01

This contribution presents a corpus of spatial descriptions and describes the development of a human-driven spatial language robot system for their comprehension. The domain of application is an eldercare setting in which an assistive robot is asked to "fetch" an object for an elderly resident based on a natural language spatial description given by the resident. In Part One, we describe a corpus of naturally occurring descriptions elicited from a group of older adults within a virtual 3D home that simulates the eldercare setting. We contrast descriptions elicited when participants offered descriptions to a human versus robot avatar, and under instructions to tell the addressee how to find the target versus where the target is. We summarize the key features of the spatial descriptions, including their dynamic versus static nature and the perspective adopted by the speaker. In Part Two, we discuss critical cognitive and perceptual processing capabilities necessary for the robot to establish a common ground with the human user and perform the "fetch" task. Based on the collected corpus, we focus here on resolving the perspective ambiguity and recognizing furniture items used as landmarks in the descriptions. Taken together, the work presented here offers the key building blocks of a robust system that takes as input natural spatial language descriptions and produces commands that drive the robot to successfully fetch objects within our eldercare scenario. Copyright © 2014 Cognitive Science Society, Inc.

The influence of object relative size on priming and explicit memory.

Directory of Open Access Journals (Sweden)

Bob Uttl

Full Text Available We investigated the effects of object relative size on priming and explicit memory for color photos of common objects. Participants were presented with color photos of pairs of objects displayed in either appropriate or inappropriate relative sizes. Implicit memory was assessed by speed of object size ratings whereas explicit memory was assessed by an old/new recognition test. Study-to-test changes in relative size reduced both priming and explicit memory and had large effects for objects displayed in large vs. small size at test. Our findings of substantial size-specific influences on priming with common objects under some but not other conditions are consistent with instance views of object perception and priming but inconsistent with structural description views.

ZLIB++: Object Oriented Numerical Library for Differential Algebra

International Nuclear Information System (INIS)

Yan, Yiton T

2003-01-01

New software engineering tools and object-oriented design have a great impact on the software development process. but in high energy physics all major packages were implemented in FORTRAN and porting of these codes to another language is rather complicated, primarily because of their huge size and heavy use of FORTRAN mathematical libraries. But some intrinsic accelerator concepts, such as nested structure of modern accelerators, look very pretty when implemented with the object-oriented approach. In this paper the authors present the object-oriented version of ZLIB, numerical library for differential algebra, and show how the modern approaches can simplify the development and support of accelerator codes, decrease code size, and allow description of complex mathematical transformations by simple language

MENTAL HEALTH OF INCARCERATED WOMEN IN THE STATE OF RIO DE JANEIRO

OpenAIRE

Santos, Márcia Vieira dos; Alves, Valdecyr Herdy; Pereira, Audrey Vidal; Rodrigues, Diego Pereira; Marchiori, Giovanna Rosário Soanno; Guerra, Juliana Vidal Vieira

2017-01-01

ABSTRACT Objective: identifying the factors related to the mental health of women in a prison in the Statey of Rio de Janeiro. Method: a descriptive, exploratory and qualitative study conducted between October 2014 and January 2015 in a female prison in the State of Rio de Janeiro. Forty (40) incarcerated women were interviewed. The information collected was discussed based on content analysis, using a thematic based modality. Results: the following factors that affect the mental health o...

Electron impact excitation of xenon from the metastable state to the excited states

Energy Technology Data Exchange (ETDEWEB)

Jiang Jun; Dong Chenzhong; Xie Luyou; Zhou Xiaoxin [College of Physics and Electronic Engineering, Northwest Normal University, Lanzhou 730070 (China); Wang Jianguo [Institute of Applied Physics and Computational Mathematic, Beijing 100088 (China)], E-mail: dongcz@nwnu.edu.cn

2008-12-28

The electron impact excitation cross sections from the lowest metastable state 5p{sup 5}6sJ = 2 to the six lowest excited states of the 5p{sup 5}6p configuration of xenon are calculated systematically by using the fully relativistic distorted wave method. In order to discuss the effects of target state descriptions on the electron impact excitation cross sections, two correlation models are used to describe the target states based on the multiconfiguration Dirac-Fock (MCDF) method. It is found that the correlation effects play a very important role in low energy impact. For high energy impact, however, the cross sections are not sensitive to the description of the target states, but many more partial waves must be included.

YUCCA MOUNTAIN SITE DESCRIPTION

Energy Technology Data Exchange (ETDEWEB)

A.M. Simmons

2004-04-16

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

An objective approach to determining criteria weights

Directory of Open Access Journals (Sweden)

Milić R. Milićević

2012-01-01

Full Text Available This paper presents an objective approach to determining criteria weights that can be successfully used in multiple criteria models. The methods of entropy, CRITIC and FANMA are presented in this paper as well as a possible combination of the methods of objective and subjective approaches. Although based on different theoretical settings, and therefore with different algorithms of realization, all methods have a decision matrix as a starting point. An objective approach to determining the weight of criteria eliminates the negative impacts of a decision maker on criteria weights as well as on the final solution of multicriteria problems. The main aim of this paper is to systematize description procedures as a kind of help when encountering a problem of determining the criteria weights for solving multicriteria tasks. A possibility of the method application is shown in a numerical example.

Minimum Delay Moving Object Detection

KAUST Repository

Lao, Dong

2017-11-09

We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon it moves in an online manner. Due to unreliability of motion between frames, more than two frames are needed to reliably detect the object. Our method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

Minimum Delay Moving Object Detection

KAUST Repository

Lao, Dong

2017-01-08

We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon it moves in an online manner. Due to unreliability of motion between frames, more than two frames are needed to reliably detect the object. Our method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

Minimum Delay Moving Object Detection

KAUST Repository

Lao, Dong; Sundaramoorthi, Ganesh

2017-01-01

We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon it moves in an online manner. Due to unreliability of motion between frames, more than two frames are needed to reliably detect the object. Our method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

Nylsvley - South African Savanna ecosystem project: objectives, organisation and research programme

CSIR Research Space (South Africa)

Huntley, BJ

1978-03-01

Full Text Available A description of the objectives, organization and research programme of the Savanna Ecosystem Project being undertaken at Nylsvley in the northern Transvaal is presented. The project is a cooperative multi-disciplinary study of the structure...

Object-oriented alarm-filtering system

International Nuclear Information System (INIS)

Corsberg, D.R.; Wilkie, D.

1986-01-01

This paper discusses an alarm-filtering system (AFS) being developed by EG and G Idaho, Inc. for the Advanced Test Reactor (ATR) at the Idaho National Engineering Laboratory. The ultimate goal of this project is to place AFS into ATR's reactor control room to act as an aid during major plant transients. In addition, methods of alarm analysis are investigated based on functional relationships rather than on a historical approach utilizing cause-consequence trees. Artificial intelligence techniques, including object-oriented programming, are also demonstrated as useful in analyzing alarms and alarm sequences. After a brief description of the problem AFS addresses, this paper discusses the design constraints and human factors that influenced the development of the system. The reader is then presented with operational and architectural descriptions of the system as well as what directions the future development of AFS may take. The fact that AFS is being considered as a partial solution to the problems discussed in the next section demonstrates the viability of its underlying technology and approach. 10 refs

7 CFR 3560.602 - Program objectives.

Science.gov (United States)

2010-01-01

... AGRICULTURE DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS On-Farm Labor Housing § 3560.602 Program objectives. In addition to the objectives stated in § 3560.52, on-farm labor housing funds will be used to... 7 Agriculture 15 2010-01-01 2010-01-01 false Program objectives. 3560.602 Section 3560.602...

7 CFR 3560.552 - Program objectives.

Science.gov (United States)

2010-01-01

... AGRICULTURE DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS Off-Farm Labor Housing § 3560.552 Program objectives. (a) In addition to the objectives stated in § 3560.52, off-farm labor housing loan and grant funds... 7 Agriculture 15 2010-01-01 2010-01-01 false Program objectives. 3560.552 Section 3560.552...

40 CFR 408.330 - Applicability; description of the abalone processing subcategory.

Science.gov (United States)

2010-07-01

... abalone processing subcategory. 408.330 Section 408.330 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Abalone Processing Subcategory § 408.330 Applicability; description of the abalone processing... abalone in the contiguous states. ...

Construction of the descriptive system for the assessment of quality of life AQoL-6D utility instrument

Directory of Open Access Journals (Sweden)

Richardson Jeffrey RJ

2012-04-01

Full Text Available Abstract Background Multi attribute utility (MAU instruments are used to include the health related quality of life (HRQoL in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL-6D, MAU instrument. Methods The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM to meet these dual requirements. Results and Discussion The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. Conclusions The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs.

WRAP Module 1 data management system (DMS) software design description (SDD)

Energy Technology Data Exchange (ETDEWEB)

Talmage, P.A.

1995-03-17

The Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) System Design Description (SDD) describes the logical and physical architecture of the system. The WRAP 1 DMS SDD formally partitions the elements of the system described in the WRAP 1 DMS Software requirements specification into design objects and describes the key properties and relationships among the design objects and interfaces with external systems such as the WRAP Plant Control System (PCS). The WRAP 1 DMS SDD can be thought of as a detailed blueprint for implementation activities. The design descriptions contained within this document will describe, in detail, the software products that will be developed to assist the Project W-026, Waste Receiving and Processing Module 1, in their management functions. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility.

WRAP Module 1 data management system (DMS) software design description (SDD)

International Nuclear Information System (INIS)

Talmage, P.A.

1995-01-01

The Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) System Design Description (SDD) describes the logical and physical architecture of the system. The WRAP 1 DMS SDD formally partitions the elements of the system described in the WRAP 1 DMS Software requirements specification into design objects and describes the key properties and relationships among the design objects and interfaces with external systems such as the WRAP Plant Control System (PCS). The WRAP 1 DMS SDD can be thought of as a detailed blueprint for implementation activities. The design descriptions contained within this document will describe, in detail, the software products that will be developed to assist the Project W-026, Waste Receiving and Processing Module 1, in their management functions. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility

Relativistic description of quark-antiquark bound states. Spin-independent treatment

International Nuclear Information System (INIS)

Gara, A.; Durand, B.; Durand, L.; Nickisch, L.J.

1989-01-01

We present the results of a detailed study of light- and heavy-quark--antiquark bound states in the context of the reduced Bethe-Salpeter equation with static vector and scalar interactions. In the present paper, we consider the spin-averaged spectra. Spin effects are considered in a separate paper. We find that this approach, although apparently successful for the heavy-quark b bar b and c bar c states, fails for the s bar s, l bar l, and light-heavy states. The reasons for the failure are intrinsic to the method, as we discuss. Difficulties are already evident for the c bar c states

A thermodynamic description of quarks at the subquark level

International Nuclear Information System (INIS)

Fitzpatrick, G.L.

1985-01-01

A thermodynamic basis for the description of quarks at the subquark level is proposed. It is suggested that subquarks are ultrarelativistic objects confined to the quark radius R. Thus they experience accelerations of the order a≅c/sup 2//R. But this means that information excluding horizons (iota) comparable to quark radii R, namely iota≅c/sup 2//a≅R, are present. Such horizons force us to describe quarks, at the subquark level, via thermodynamics. This thermodynamic description must involve unconventional negative energy Rindler vacua, rather than the conventional zero energy Minkowski vacuum. In an average thermodynamic sense, these Rindler vacua cancel excess kinetic energy of the subquarks, thereby removing an objection to theories involving subquarks. In any such theory it is necessary to assign an Unruh temperature T, where kT≅(h/2πc)a≅(hc/2πR), to the subquark matter. The author argues that T must be the temperature of the early universe phase transition (probably first order) at which quarks condensed into hadrons. Thus quarks have a temperature T independent of hadron mass. He shows how quark properties may be derived in the foregoing thermodynamic context

Ecosystem description of a drainage area - a strategy in biosphere descriptions during site investigations for a repository of spent nuclear fuel

International Nuclear Information System (INIS)

Lindborg, T.; Lofgren, A.

2004-01-01

During the next few years the Swedish Nuclear Fuel and Waste Management Co. (SKB) performs site investigations at two sites in Sweden for a future repository of spent nuclear fuel. Novel methods based on systems and landscape ecology are developed to understand and model the radionuclide flow in the biosphere using site specific data for a safety assessment. This work describes the strategy for development of a descriptive ecosystem model for the surface ecosystem. The site description is needed to: a) perform a safety assessment that describes and analyzes different scenarios for radionuclide releases into the ecosystem and possible pathways for dispersal or accumulation radionuclides in the ecosystem, b) detect changes caused by the construction of a repository, c) establish a baseline for detecting long-term effects of the repository. The description adopts a site-specific approach focusing on the quantification of the properties that will constitute the descriptive model. The aim is also to present the methodology for determining the properties, to describe the development of the framework for the descriptive ecosystem models by integrating use of different properties, and finally, to present vital data from other site descriptive models such as those for geology or hydrogeology. The safety assessment will use an approach, among other methods, where transport and accumulation of radionuclides will be modelled by quantifying biogeochemical pathways of matter. The descriptive ecosystem model applied to the site was therefore built to describe and quantify processes affecting i.e. turnover of matter in a drainage area. The conclusions from applying this approach was that by have estimating the flow of matter the ecological and physical constrains on the system reduces the potential variations in outcome of future states of the ecosystem and thus also reduces the uncertainties in estimating radionuclide flow and consequences to humans and the environment. (author)

THE SPANISH SCIENTIFIC JOURNALS: A DESCRIPTIVE APPROACH

Directory of Open Access Journals (Sweden)

Melba G. Claudio-González

2017-02-01

Full Text Available The main objective of this article is to present a broad description of Spanish scientific journals. The results were obtained from a survey distributed to 1,280 editors of Spanish scientific journals included in Dulcinea database (2012 edition. The response rate was 43,8%. As specific objectives, the study aimed to characterize scientific journals and to analyze the particularities of a set of parameters that make up the economic, strategic and operational dimensions of the journals in the period studied. The results show that the funding model of the Spanish scientific journals depends mainly on institutional support, that many journals lack a stable organizational structure and rely heavily on volunteer work, and that the debate on the limitations and difficulties affecting the development of open access remains open.

Description of Rhodnius marabaensis sp. n. (Hemiptera, Reduviidae, Triatominae) from Pará State, Brazil

Science.gov (United States)

Souza, Eder dos Santos; Von Atzingen, Noé Carlos Barbosa; Furtado, Maria Betânia; de Oliveira, Jader; Nascimento, Juliana Damieli; Vendrami, Daniel Pagotto; Gardim, Sueli; da Rosa, João Aristeu

2016-01-01

Abstract Rhodnius marabaensis sp. n. was collected on 12 May 2014 in the Murumurú Environmental Reserve in the city of Marabá, Pará State, Brazil. This study was based on previous consultation of morphological descriptions of 19 Rhodnius species and compared to the identification key for the genus Rhodnius. The examination included specimens from 18 Rhodnius species held in the Brazilian National and International Triatomine Taxonomy Reference Laboratory in the Oswaldo Cruz Institute in Rio de Janeiro, Brazil. The morphological characteristics of the head, thorax, abdomen, genitalia, and eggs have been determined. Rhodnius prolixus and Rhodnius robustus were examined in more detail because the BLAST analysis of a cyt-b sequence shows they are closely related to the new species, which also occurs in the northern region of Brazil. The most notable morphological features that distinguish Rhodnius marabaensis sp. n. are the keel-shaped apex of the head, the length of the second segment of the antennae, the shapes of the prosternum, mesosternum and metasternum, the set of spots on the abdomen, the male genitalia, the posterior and ventral surfaces of the external female genitalia, and the morphological characteristics of the eggs. Rhodnius jacundaensis Serra, Serra & Von Atzingen (1980) nomen nudum specimens deposited at the Maraba Cultural Center Foundation - MCCF were examined and considered as a synonym of Rhodnius marabaensis sp. n. PMID:27833419

A retrograde object near Jupiter's orbit

Science.gov (United States)

Connors, M.; Wiegert, P.

2018-02-01

Asteroid 2007 VW266 is among the rare objects with a heliocentric retrograde orbit, and its semimajor axis is within a Hill sphere radius of that of Jupiter. This raised the interesting possibility that it could be in co-orbital retrograde resonance with Jupiter, a second "counter-orbital" object in addition to recently discovered 2015 BZ509. We find instead that the object is in 13/14 retrograde mean motion resonance (also referred to as 13/-14). The object is shown to have entered its present orbit about 1700 years ago, and it will leave it in about 8000 years, both through close approach to Jupiter. Entry and exit states both avoid 1:1 retrograde resonance, but the retrograde nature is preserved. The temporary stable state is due to an elliptic orbit with high inclination keeping nodal passages far from the associated planet. We discuss the motion of this unusual object based on modeling and theory, and its observational prospects.

Principles and objectives for the operation and support of standard nuclear plants

International Nuclear Information System (INIS)

1994-08-01

This publication provides the guiding principles and objectives for the operation and support of standard nuclear plants. They are the basis for designing the processes to operate and support the new plants and to estimate the staffing options. INPO has facilitated and coordinated the development of these principles and objectives under the industry's Strategic Plan for Building New Nuclear Power Plants. The industry's plan, first published in 1990, designates INPO as the lead in achieving the following goals: 1. Establish an institutional framework and approach to implement and maintain a model for life-cycle standardization of a family of plants. 2. Develop standardization objectives and selected standardized function and process descriptions to provide a basis for uniformity in appropriate aspects of the organizational structure; administrative controls; and construction, startup, operating, and maintenance practices. 3. Develop an approach to maintain the standard design and design intent as well as standardized operational approaches in all units within a family of plants over their lifetimes. This document supports these goals. Twelve guiding principles are followed by descriptions of four functions, and after that eight processes with their associated objectives

Costs Systems: Relevance, Feasibility And Usefulness According To Public Officials In The State Of Paraná (Brazil

Directory of Open Access Journals (Sweden)

Luciane Maria Gonçalves Franco

2013-06-01

Full Text Available The aim in this study is to get to know the level of understanding and adoption of cost systems in cities in the State of Paraná. A descriptive study with a qualitative approach was undertaken. Data were collected through the application of a questionnaire in 67 cities in the State of Paraná. Descriptive analysis was used and Spearman’s correlation coefficient was applied to achieve the research objective. Among the study results, the following stand out: the incipient nature of knowledge about the relevance, feasibility and usefulness of a cost system; resulting from public officials’ limited knowledge, mainly about topics related to the budgetary and financial feasibility of adopting cost systems; an environment for the cost system, implemented costs systems and operating systems; although the answers obtained to proposals about cost information and control were significantly coherent.

An Assessment of the State of the Art of Curriculum Materials and a Status Assessment of Training Programs for Robotics/Automated Systems Technicians. Task Analysis and Descriptions of Required Job Competencies of Robotics/Automated Systems Technicians.

Science.gov (United States)

Hull, Daniel M.; Lovett, James E.

This report presents the results of research conducted to determine the current state of the art of robotics/automated systems technician (RAST) training offered in the United States. Section I discusses the RAST curriculum project, of which this state-of-the-art review is a part, and offers a RAST job description. Section II describes the…

The State of Veterinary Dental Education in North America, Canada, and the Caribbean: A Descriptive Study.

Science.gov (United States)

Anderson, Jamie G; Goldstein, Gary; Boudreaux, Karen; Ilkiw, Jan E

Dental disease is important in the population of pets seen by veterinarians. Knowledge and skills related to oral disease and dentistry are critical entry-level skills expected of graduating veterinarians. A descriptive survey on the state of veterinary dental education was sent to respondents from 35 veterinary schools in the United States, Canada, and the Caribbean. Using the online SurveyMonkey application, respondents answered up to 26 questions. Questions were primarily designed to determine the breadth and depth of veterinary dental education from didactic instruction in years 1-3 to the clinical year programs. There was an excellent response to the survey with 86% compliance. Learning opportunities for veterinary students in years 1-3 in both the lecture and laboratory environments were limited, as were the experiences in the clinical year 4, which were divided between community-type practices and veterinary dentistry and oral surgery services. The former provided more hands-on clinical experience, including tooth extraction, while the latter focused on dental charting and periodontal debridement. Data on degrees and certifications of faculty revealed only 12 programs with board-certified veterinary dentists. Of these, seven veterinary schools had residency programs in veterinary dentistry at the time of the survey. Data from this study demonstrate the lack of curricular time dedicated to dental content in the veterinary schools participating in the survey, thereby suggesting the need for veterinary schools to address the issue of veterinary dental education. By graduation, new veterinarians should have acquired the needed knowledge and skills to meet both societal demands and professional expectations.

Talking about relations: Factors influencing the production of relational descriptions

Directory of Open Access Journals (Sweden)

Adriana eBaltaretu

2016-02-01

Full Text Available In a production experiment (Experiment 1 and an acceptability rating one (Experiment 2, we assessed two factors, spatial position and salience, which may influence the production of relational descriptions (such as the ball between the man and the drawer. In Experiment 1, speakers were asked to refer unambiguously to a target object (a ball. In Experiment 1a, we addressed the role of spatial position, more specifically if speakers mention the entity positioned leftmost in the scene as (first relatum. The results showed a preference to start with the left entity, however, only as a trend, which leaves room for other factors that could influence spatial reference. Thus, in the following studies, we varied salience systematically, by making one of the relatum candidates animate (Experiment 1b, and by adding attention capture cues, first subliminally by priming one relatum candidate with a flash (Experiment 1c, then explicitly by using salient colors for objects (Experiment 1d. Results indicate that spatial position played a dominant role. Entities on the left were mentioned more often as (first relatum than those on the right (Experiment 1a, 1b, 1c, 1d. Animacy affected reference production in one out of three studies (in Experiment 1d. When salience was manipulated by priming visual attention or by using salient colors, there were no significant effects (Experiment 1c, 1d. In the acceptability rating study (Experiment 2, participants expressed their preference for specific relata, by ranking descriptions on the basis of how good they thought the descriptions fitted the scene. Results show that participants preferred most the description that had an animate entity as the first mentioned relatum. The relevance of these results for models of reference production is discussed.

Epidemiological overview of HIV/AIDS in pregnant women from a state of northeastern Brazil

OpenAIRE

Silva, Claúdia Mendes da; Alves, Regina de Souza; Santos, Tâmyssa Simões dos; Bragagnollo, Gabriela Rodrigues; Tavares, Clodis Maria; Santos, Amuzza Aylla Pereira dos

2018-01-01

ABSTRACT Objective: To learn the epidemiological characteristics of HIV infection in pregnant women. Method: Descriptive study with quantitative approach. The study population was composed of pregnant women with HIV/AIDS residing in the state of Alagoas. Data were organized into variables and analyzed according to the measures of dispersion parameter relevant to the arithmetic mean and standard deviation (X ± S). Results: Between 2007 and 2015, 773 cases of HIV/AIDS were recorded in pregna...

Description of intruded states in a weak-coupling basis

International Nuclear Information System (INIS)

Arenas Peris, G.E.

1989-01-01

The systematics of intruder states is described in terms of a particle-hole weak-coupling basis, the first-order correction being then reduced to the monopole component of the interaction. The necessary matrix elements can be obtained from experimental data by using a model-consistent method. Calculations are performed for intruder states in the lead region as well as for the Zr isotopes. The agreement with the experimental data is striking in both cases. (Author) [es

Object linking in repositories

Science.gov (United States)

Eichmann, David (Editor); Beck, Jon; Atkins, John; Bailey, Bill

1992-01-01

This topic is covered in three sections. The first section explores some of the architectural ramifications of extending the Eichmann/Atkins lattice-based classification scheme to encompass the assets of the full life cycle of software development. A model is considered that provides explicit links between objects in addition to the edges connecting classification vertices in the standard lattice. The second section gives a description of the efforts to implement the repository architecture using a commercially available object-oriented database management system. Some of the features of this implementation are described, and some of the next steps to be taken to produce a working prototype of the repository are pointed out. In the final section, it is argued that design and instantiation of reusable components have competing criteria (design-for-reuse strives for generality, design-with-reuse strives for specificity) and that providing mechanisms for each can be complementary rather than antagonistic. In particular, it is demonstrated how program slicing techniques can be applied to customization of reusable components.

Retrieving top-k prestige-based relevant spatial web objects

DEFF Research Database (Denmark)

Cao, Xin; Cong, Gao; Jensen, Christian S.

2010-01-01

The location-aware keyword query returns ranked objects that are near a query location and that have textual descriptions that match query keywords. This query occurs inherently in many types of mobile and traditional web services and applications, e.g., Yellow Pages and Maps services. Previous...... of prestige-based relevance to capture both the textual relevance of an object to a query and the effects of nearby objects. Based on this, a new type of query, the Location-aware top-k Prestige-based Text retrieval (LkPT) query, is proposed that retrieves the top-k spatial web objects ranked according...... to both prestige-based relevance and location proximity. We propose two algorithms that compute LkPT queries. Empirical studies with real-world spatial data demonstrate that LkPT queries are more effective in retrieving web objects than a previous approach that does not consider the effects of nearby...

The Visual Object Tracking VOT2015 Challenge Results

KAUST Repository

Kristan, Matej; Matas, Jiri; Leonardis, Ale; Felsberg, Michael; Cehovin, Luka; Fernandez, Gustavo; Vojir, Toma; Hager, Gustav; Nebehay, Georg; Pflugfelder, Roman; Gupta, Abhinav; Bibi, Adel Aamer; Lukezic, Alan; Garcia-Martin, Alvaro; Saffari, Amir; Petrosino, Alfredo; Montero, Andres Solıs; Varfolomieiev, Anton; Baskurt, Atilla; Zhao, Baojun; Ghanem, Bernard; Martinez, Brais; Lee, ByeongJu; Han, Bohyung; Wang, Chaohui; Garcia, Christophe; Zhang, Chunyuan; Schmid, Cordelia; Tao, Dacheng; Kim, Daijin; Huang, Dafei; Prokhorov, Danil; Du, Dawei; Yeung, Dit-Yan; Ribeiro, Eraldo; Khan, Fahad Shahbaz; Porikli, Fatih; Bunyak, Filiz; Zhu, Gao; Seetharaman, Guna; Kieritz, Hilke; Yau, Hing Tuen; Li, Hongdong; Qi, Honggang; Bischof, Horst; Possegger, Horst; Lee, Hyemin; Nam, Hyeonseob; Bogun, Ivan; Jeong, Jae-chan; Cho, Jae-il; Lee, Jae-Yeong; Zhu, Jianke; Shi, Jianping; Li, Jiatong; Jia, Jiaya; Feng, Jiayi; Gao, Jin; Choi, Jin Young; Kim, Ji-Wan; Lang, Jochen; Martinez, Jose M.; Choi, Jongwon; Xing, Junliang; Xue, Kai; Palaniappan, Kannappan; Lebeda, Karel; Alahari, Karteek; Gao, Ke; Yun, Kimin; Wong, Kin Hong; Luo, Lei; Ma, Liang; Ke, Lipeng; Wen, Longyin; Bertinetto, Luca; Pootschi, Mahdieh; Maresca, Mario; Danelljan, Martin; Wen, Mei; Zhang, Mengdan; Arens, Michael; Valstar, Michel; Tang, Ming; Chang, Ming-Ching; Khan, Muhammad Haris; Fan, Nana; Wang, Naiyan; Miksik, Ondrej; Torr, Philip H S; Wang, Qiang; Martin-Nieto, Rafael; Pelapur, Rengarajan; Bowden, Richard; Laganiere, Robert; Moujtahid, Salma; Hare, Sam; Hadfield, Simon; Lyu, Siwei; Li, Siyi; Zhu, Song-Chun; Becker, Stefan; Duffner, Stefan; Hicks, Stephen L; Golodetz, Stuart; Choi, Sunglok; Wu, Tianfu; Mauthner, Thomas; Pridmore, Tony; Hu, Weiming; Hubner, Wolfgang; Wang, Xiaomeng; Li, Xin; Shi, Xinchu; Zhao, Xu; Mei, Xue; Shizeng, Yao; Hua, Yang; Li, Yang; Lu, Yang; Li, Yuezun; Chen, Zhaoyun; Huang, Zehua; Chen, Zhe; Zhang, Zhe; He, Zhenyu; Hong, Zhibin

2015-01-01

The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website.

The Visual Object Tracking VOT2015 Challenge Results

KAUST Repository

Kristan, Matej

2015-12-07

The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website.

Description and status update on GELLO: a proposed standardized object-oriented expression language for clinical decision support.

Science.gov (United States)

Sordo, Margarita; Boxwala, Aziz A; Ogunyemi, Omolola; Greenes, Robert A

2004-01-01

A major obstacle to sharing computable clinical knowledge is the lack of a common language for specifying expressions and criteria. Such a language could be used to specify decision criteria, formulae, and constraints on data and action. Al-though the Arden Syntax addresses this problem for clinical rules, its generalization to HL7's object-oriented data model is limited. The GELLO Expression language is an object-oriented language used for expressing logical conditions and computations in the GLIF3 (GuideLine Interchange Format, v. 3) guideline modeling language. It has been further developed under the auspices of the HL7 Clinical Decision Support Technical Committee, as a proposed HL7 standard., GELLO is based on the Object Constraint Language (OCL), because it is vendor-independent, object-oriented, and side-effect-free. GELLO expects an object-oriented data model. Although choice of model is arbitrary, standardization is facilitated by ensuring that the data model is compatible with the HL7 Reference Information Model (RIM).

The degree of horizontal violence in RNs practicing in New York State.

Science.gov (United States)

Sellers, Kathleen F; Millenbach, Linda; Ward, Kathy; Scribani, Melissa

2012-10-01

This study examined the degree of horizontal violence (HV) among RNs practicing in New York State (NYS). The objective was to determine the knowledge of HV and the degree of being a victim among practicing RNs. A descriptive survey using Briles' Sabotage Savvy Questionnaire, measuring occurrences of HV and nurses' knowledge of HV, was conducted among 2659 RNs in NYS hospitals. Findings demonstrate a significantly greater (P leadership, and individual interventions to address HV helps create a culture of safety.

RuleML-Based Learning Object Interoperability on the Semantic Web

Science.gov (United States)

Biletskiy, Yevgen; Boley, Harold; Ranganathan, Girish R.

2008-01-01

Purpose: The present paper aims to describe an approach for building the Semantic Web rules for interoperation between heterogeneous learning objects, namely course outlines from different universities, and one of the rule uses: identifying (in)compatibilities between course descriptions. Design/methodology/approach: As proof of concept, a rule…

Consumer Preference and Description of Salmon in Four Northern Atlantic Countries and Association with Sensory Characteristics

NARCIS (Netherlands)

Green-Petersen, D.; Hyldig, G.; Sveinsdottir, K.; Schelvis-Smit, A.A.M.; Martinsdottir, E.

2009-01-01

The focus in this article is on the relation between consumer preference and objective description of the product profile of salmon. A consumer study of eight salmon products was carried out in Iceland, Denmark, the Netherlands, and Ireland. In addition, objective sensory profiling using a trained

Consumer preference and description of salmon in four Northern Atlantic countries and association with sensory characteristics

DEFF Research Database (Denmark)

Green-Petersen, Ditte; Hyldig, Grethe; Sveinsdóttir, K.

2009-01-01

The focus in this article is on the relation between consumer preference and objective description of the product profile of salmon. A consumer study of eight salmon products was carried out in Iceland, Denmark, the Netherlands, and Ireland. In addition, objective sensory profiling using a trained...

Traditions and Customs in Community Development: The Case of Nkanu West and Nkanu East Local Government Areas of Enugu State, Nigeria

Science.gov (United States)

Adekola, G.; Egbo, Nwoye Charles

2016-01-01

This study examined the influence of traditions and customs on community development in Nkanu West and Nkanu East Local Government Areas of Enugu State. The study was carried out with three objectives and three null hypotheses. The research adopted descriptive survey design with a population of 2,125 members of community Based Organizations in the…

Holographic description of AdS cosmologies

Energy Technology Data Exchange (ETDEWEB)

Hertog, Thomas [Department of Physics, UCSB, Santa Barbara, CA 93106 (United States); Horowitz, Gary T. [Department of Physics, UCSB, Santa Barbara, CA 93106 (United States)

2005-04-01

To gain insight in the quantum nature of the big bang, we study the dual field theory description of asymptotically anti-de Sitter solutions of supergravity that have cosmological singularities. The dual theories do not appear to have a stable ground state. One regularization of the theory causes the cosmological singularities in the bulk to turn into giant black holes with scalar hair. We interpret these hairy black holes in the dual field theory and use them to compute a finite temperature effective potential. In our study of the field theory evolution, we find no evidence for a 'bounce' from a big crunch to a big bang. Instead, it appears that the big bang is a rare fluctuation from a generic equilibrium quantum gravity state.

Holographic description of AdS cosmologies

International Nuclear Information System (INIS)

Hertog, Thomas; Horowitz, Gary T.

2005-01-01

To gain insight in the quantum nature of the big bang, we study the dual field theory description of asymptotically anti-de Sitter solutions of supergravity that have cosmological singularities. The dual theories do not appear to have a stable ground state. One regularization of the theory causes the cosmological singularities in the bulk to turn into giant black holes with scalar hair. We interpret these hairy black holes in the dual field theory and use them to compute a finite temperature effective potential. In our study of the field theory evolution, we find no evidence for a 'bounce' from a big crunch to a big bang. Instead, it appears that the big bang is a rare fluctuation from a generic equilibrium quantum gravity state

Organic electronic materials: Recent advances in the dft description of the ground and excited states using tuned range-separated hybrid functionals

KAUST Repository

Körzdörfer, Thomas

2014-11-18

Density functional theory (DFT) and its time-dependent extension (TD-DFT) are powerful tools enabling the theoretical prediction of the ground- and excited-state properties of organic electronic materials with reasonable accuracy at affordable computational costs. Due to their excellent accuracy-to-numerical-costs ratio, semilocal and global hybrid functionals such as B3LYP have become the workhorse for geometry optimizations and the prediction of vibrational spectra in modern theoretical organic chemistry. Despite the overwhelming success of these out-of-the-box functionals for such applications, the computational treatment of electronic and structural properties that are of particular interest in organic electronic materials sometimes reveals severe and qualitative failures of such functionals. Important examples include the overestimation of conjugation, torsional barriers, and electronic coupling as well as the underestimation of bond-length alternations or excited-state energies in low-band-gap polymers.In this Account, we highlight how these failures can be traced back to the delocalization error inherent to semilocal and global hybrid functionals, which leads to the spurious delocalization of electron densities and an overestimation of conjugation. The delocalization error for systems and functionals of interest can be quantified by allowing for fractional occupation of the highest occupied molecular orbital. It can be minimized by using long-range corrected hybrid functionals and a nonempirical tuning procedure for the range-separation parameter.We then review the benefits and drawbacks of using tuned long-range corrected hybrid functionals for the description of the ground and excited states of π-conjugated systems. In particular, we show that this approach provides for robust and efficient means of characterizing the electronic couplings in organic mixed-valence systems, for the calculation of accurate torsional barriers at the polymer limit, and for the

Children’s sedentary behaviour: descriptive epidemiology and associations with objectively-measured sedentary time

OpenAIRE

Klitsie, Tessa; Corder, Kirsten; Visscher, Tommy LS; Atkin, Andrew J; Jones, Andrew P; van Sluijs, Esther MF

2013-01-01

Background: Little is known regarding the patterning and socio-demographic distribution of multiple sedentary behaviours in children. The aims of this study were to: 1) describe the leisure-time sedentary behaviour of 9-10 year old British children, and 2) establish associations with objectively-measured sedentary time. Methods. Cross-sectional analysis in the SPEEDY study (Sport, Physical activity and Eating behaviour: Environmental Determinants in Young people) (N=1513, 44.3% boys). Twelve ...

The Dynamic Multi-objective Multi-vehicle Covering Tour Problem

Science.gov (United States)

2013-06-01

144 [38] Coello, Carlos A. Coello, Gary B Lamont, and David A Van Veldhuizen . Evolutionary Algorithms for Solving Multi-Objective Problems. Springer...Traveling Repairperson Problem (DTRP) Policies Proposed by Bertsimas and Van Ryzin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3.3...queuing theory perspective. Table 3.2: DTRP Policies Proposed by Bertsimas and Van Ryzin. Name Description First Come First Serve (FCFS) vehicles

Quality of reporting of descriptive studies in implant dentistry. Critical aspects in design, outcome assessment and clinical relevance

NARCIS (Netherlands)

Meijer, Henny J. A.; Raghoebar, Gerry M.

Objectives: The aim of this study was to conduct a review on quality of reporting on descriptive studies in implant dentistry using the STROBE Statement and to analyse possible changes in quality of reporting on descriptive studies in implant dentistry over time. Material and Methods: A hand search

Investigation of nuclear power safety objects

International Nuclear Information System (INIS)

2003-09-01

It is a report of ground and concept of nuclear safety objects and future issues in Japan, which has investigated by the Committee of Experts on Investigation of Nuclear Safety Objects in the Nuclear Safety Research Association. The report consisted of member of committee, main conclusions and five chapters. The first chapter contains construction of safety objects and range of object, the second chapter qualitative safety objects, the third chapter quantitative safety objects, the forth subsiding objects and the fifth other items under consideration. The qualitative safety objects on individual and society, the quantitative one on effects on health and social cost, aspect of safety objects, relation between radiation protection and safety objects, practical objective values and earthquake are stated. (S.Y.)

A new object-oriented interface to MDSplus

International Nuclear Information System (INIS)

Manduchi, G.; Fredian, T.; Stillerman, J.

2010-01-01

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

A new object-oriented interface to MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G., E-mail: gabriele.manduchi@igi.cnr.i [Consorzio RFX, Euratom-ENEA Association, Corso Stati Uniti 4, Padova 35127 (Italy); Fredian, T.; Stillerman, J. [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States)

2010-07-15

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

Autonomous Space Object Catalogue Construction and Upkeep Using Sensor Control Theory

Science.gov (United States)

Moretti, N.; Rutten, M.; Bessell, T.; Morreale, B.

The capability to track objects in space is critical to safeguard domestic and international space assets. Infrequent measurement opportunities, complex dynamics and partial observability of orbital state makes the tracking of resident space objects nontrivial. It is not uncommon for human operators to intervene with space tracking systems, particularly in scheduling sensors. This paper details the development of a system that maintains a catalogue of geostationary objects through dynamically tasking sensors in real time by managing the uncertainty of object states. As the number of objects in space grows the potential for collision grows exponentially. Being able to provide accurate assessment to operators regarding costly collision avoidance manoeuvres is paramount; the accuracy of which is highly dependent on how object states are estimated. The system represents object state and uncertainty using particles and utilises a particle filter for state estimation. Particle filters capture the model and measurement uncertainty accurately, allowing for a more comprehensive representation of the state’s probability density function. Additionally, the number of objects in space is growing disproportionally to the number of sensors used to track them. Maintaining precise positions for all objects places large loads on sensors, limiting the time available to search for new objects or track high priority objects. Rather than precisely track all objects our system manages the uncertainty in orbital state for each object independently. The uncertainty is allowed to grow and sensor data is only requested when the uncertainty must be reduced. For example when object uncertainties overlap leading to data association issues or if the uncertainty grows to beyond a field of view. These control laws are formulated into a cost function, which is optimised in real time to task sensors. By controlling an optical telescope the system has been able to construct and maintain a catalogue

Description of width and spectra of two relativistic fermions bound states

International Nuclear Information System (INIS)

Sidorov, A.V.; Skachkov, N.B.

1979-01-01

The formalism for relativistic description of two particles with spin 1/2 is constructed. Used is the two-particle three-dimensional equation, obtained by quasipotential approach. Quasipotential equation in the relativistic configurational space with OBEP potential is reduced to the system of partial equations which is the analog of nonrelativistic Hamada-Jonston system. WKB approach is used to calculate mass spectra and leptonic width of mesons in quark model. The results of the study can be applied to the calculation of mass spectra and widths of electromagnetic decays of systems of e + e - , μ + μ - , c anti c, b anti b, N anti N type

41 CFR 101-29.102 - Use of metric system of measurement in Federal product descriptions.

Science.gov (United States)

2010-07-01

... PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.1-General § 101-29.102 Use of metric system of measurement in... measurement in Federal product descriptions. 101-29.102 Section 101-29.102 Public Contracts and Property... Federal agencies to: (a) Maintain close liaison with other Federal agencies, State and local governments...

A Semiotic Framework for the Semantics of Digital Multimedia Learning Objects

DEFF Research Database (Denmark)

May, Michael

2007-01-01

The relevance of semiotics for extending multimedia description schemes will be shown relative to existing strategies for indexing and retrieval. The semiotic framework presented is intended to support a compositional semantics of flexible digital multimedia objects. Besides semiotics insights fr...... Formal Concept Analysis is utilized....

Device for storage of cylindrical objects with quick loading-unloading system

International Nuclear Information System (INIS)

Besnier, J.

1995-01-01

This device comprises one or more co-axial rotative racks with radially distributed alveoles for the storage of cylindrical objects such as small jugs filled with radioactive samples. An opening is managed in each alveole for the ejection of the object towards a receptacle and alveoles are inclined with respect to the rotation axis of the rack to avoid casual fall of the objects. Selective ejection of the samples is obtained with ab toggle lever fitted inside each alveole and controlled by a single pneumatic jack. Details of manufacturing and description of parts are given. (J.S.). 6 refs., 2 figs

A Stochastic Description of Transition Between Granular Flow States

International Nuclear Information System (INIS)

Huang Decai; Sun Gang; Lu Kunquan

2007-01-01

Two-dimensional granular flow in a channel with small exit is studied by molecular dynamics simulations. We firstly define a key area near the exit, which is considered to be the choke area of the system. Then we observe the time variation of the local packing fraction and flow rate in this area for several fixed inflow rate, and find that these quantities change abruptly when the transition from dilute flow state to dense flow state happens. A relationship between the local flow rate and the local packing fraction in the key area is also given. The relationship is a continuous function under the fixed particle number condition, and has the characteristic that the flow rate has a maximum at a moderate packing fraction and the packing fraction is terminated at a high value with negative slope. By use of the relationship, the properties of the flow states under the fixed inflow rate condition are discussed in detail, and the discontinuities and the complex time variation behavior observed in the preexisting works are naturally explained by a stochastic process.

Civil Society as a Self-Organizing Social System and the State: Some Objections to the Hegel Concept

Directory of Open Access Journals (Sweden)

Ludmila J. Grudtsina

2014-03-01

Full Text Available In the present article author attempts by using different scientific methods used in synergy, to propose an alternative formula to the formula of Hegelian distinction of civil society and state, that are not as different and competing with each other systems as well as the necessary elements to each other converge single social system. This scientific idea is presented in an arithmetic progression in civil society - "mass", next level - the civil society itself, realizing itself, advancing and increasingly, next level – the legal state (ideal for which to strive. In this case, the state will not be the term, but the result in the formula. In the conclusion, author concludes that one can not ignore responsibility of authorities, seeking in the modern world to create institutes of civil society. Taking into account that this generally positive process can be used as a special instrument of government, including the effective management of the objective processes in society, where the presence of democratic prerequisites, no matter how weak they are, civil society inevitably grows up.

Tight-Binding Description of Impurity States in Semiconductors

Science.gov (United States)

Dominguez-Adame, F.

2012-01-01

Introductory textbooks in solid state physics usually present the hydrogenic impurity model to calculate the energy of carriers bound to donors or acceptors in semiconductors. This model treats the pure semiconductor as a homogeneous medium and the impurity is represented as a fixed point charge. This approach is only valid for shallow impurities…

A new compiler for the GANIL Data Acquisition description

International Nuclear Information System (INIS)

Saillant, F.; Raine, B.

1997-01-01

An important feature of the GANIL Data Acquisition System is the description of the experiments by means of a language developed at GANIL. The philosophy is to attribute to each element (parameters, spectra, etc) an operational name which will be used at any level of the system. This language references a library of modules to free the user from the technical details of the hardware. This compiler has been recently entirely re-developed using technologies as the object-oriented language (C++) and object-oriented software development method and tool. This enables us to provide a new functionality or to support a new electronic module within a very short delay and without any deep modification of the application. A new Dynamic Library of Modules has been also developed. Its complete description is available on the GANIL WEB site http://ganinfo.in2p3.fr/acquisition/homepage.html. This new compiler brings a lot of new functionalities, among which the most important is the notion of 'register' whatever the module standard is. All the registers described in the module provider's documentation can now be accessed by their names. Another important new feature is the notion of 'function' that can be executed on a module. Also a set of new instructions has been implemented to execute commands on CAMAC crates. Another possibility of this new compiler is to enable the description of specific interfaces with GANIL Data Acquisition System. This has been used to describe the coupling of the CHIMERA Data Acquisition System with the INDRA one through a shared memory in the VME crate. (authors)

Identifying marine pelagic ecosystem management objectives and indicators

DEFF Research Database (Denmark)

Trenkel, Verena M.; Hintzen, Niels T.; Farnsworth, Keith D.

2015-01-01

. Overall 26 objectives were proposed, with 58% agreement in proposed objectives between two workshops. Based on published evidence for pressure-state links, examples of operational objectives and suitable indicators for each of the 26 objectives were then selected. It is argued that given the strong......International policy frameworks such as the Common Fisheries Policy and the European Marine Strategy Framework Directive define high-level strategic goals for marine ecosystems. Strategic goals are addressed via general and operational management objectives. To add credibility and legitimacy...... scale in some cases. In the evidence-based approach used in this study, the selection of species or region specific operational objectives and indicators was based on demonstrated pressure-state links. Hence observed changes in indicators can reliably inform on appropriate management measures. (C) 2015...

[State Hygiene Institute, 1918-1954 organisational structure, objectives and tasks].

Science.gov (United States)

Wieckowska, E

2001-01-01

After Poland regained its independence in 1918, research units were set up to provide scientific assistance to the state health and epidemiological service then being created. Towards the end of 1918 The State Central Hygiene Institute was established and, following successive reorganisations, transformed into the State Hygiene Institute. It operated at Chocimska str. 24 throughout the entire pre-war period, adapting its organisational structure to current needs. As a state public-health institution, it tracked down sources of communicable diseases and the way they were spread, and conducted research to detect cases of Asian cholera and carriers of contagious diseases. It produced vaccinations of other biological products used in the treatment and prevention of epidemics and made a significant contribution to the war on communicable diseases. It also served as the central state institution in charge of inspecting the country's epidemiological condition as well as a scientific-research facility designed to maintain it at a suitable level in accordance with international norms. With various organisational modifications it survived World War Two, its continued existence being maintained by the German occupation authorities. Reactivated after the war it continues to function to this day at its old location - ulica Chocimska 24, where it serves as a scientific-research facility for health and epidemiological services transferred to a separate organisational structure after 1950. Health and sanitary stations became state institutions in charge of anti-epidemic campaigns and were responsible for the country's health and epidemiological situation. In 1954, the State Health Inspectorate co-operating with the Ministry of Health was set up. The State Hygiene Institute functions to this day and it is the supervisory, co-ordinating and scientific-research institution of the State Health and Epidemiological Service.

Object based data access at the D0 experiment

International Nuclear Information System (INIS)

Fuess, S.

1995-11-01

The D OE Experiment at Fermilab is currently participating in the FNAL Computing Division's ''Computing for Analysis Project'' (CAP) to investigate object based data storage and access. Following a short description of the CAP system architecture, the D OE data model is explored. A brief discussion of the method of operation of the CAP system leads into a concluding section

Biologically Inspired Object Localization for a Modular Mobile Robotic System

Directory of Open Access Journals (Sweden)

Zlatogor Minchev

2005-12-01

Full Text Available The paper considers a general model of real biological creatures' antennae, which is practically implemented and tested, over a real element of a mobile modular robotic system - the robot MR1. The last could be utilized in solving of the most classical problem in Robotics - Object Localization. The functionality of the represented sensor system is described in a new and original manner by utilizing the tool of Generalized Nets - a new likelihood for description, modelling and simulation of different objects from the Artificial Intelligence area including Robotics.

Description of the skills acquisition programmes in Abua/Odual local ...

African Journals Online (AJOL)

This paper studied the impact of skills acquisition programmes in human and societal economic development in Abua/Odual Local Government Area in Rivers State. The study adopted a descriptive survey design. One hundred and thirty respondents were randomly selected from 13 skills acquisition centres as participants.

Hardware description languages

Science.gov (United States)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

Simpevarp - site descriptive model version 0

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-11-01

During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

Quality of Austrian and Dutch Falls-Prevention Information: A Comparative Descriptive Study

Science.gov (United States)

Schoberer, Daniela; Mijnarends, Donja M.; Fliedner, Monica; Halfens, Ruud J. G.; Lohrmann, Christa

2016-01-01

Objectives: The aim of this study was to evaluate and compare the quality of written patient information material available in Austrian and Dutch hospitals and nursing homes pertaining to falls prevention. Design: Comparative descriptive study design Setting: Hospitals and nursing homes in Austria and the Netherlands. Method: Written patient…

Application of Resource Description Framework to Personalise Learning: Systematic Review and Methodology

Science.gov (United States)

Jevsikova, Tatjana; Berniukevicius, Andrius; Kurilovas, Eugenijus

2017-01-01

The paper is aimed to present a methodology of learning personalisation based on applying Resource Description Framework (RDF) standard model. Research results are two-fold: first, the results of systematic literature review on Linked Data, RDF "subject-predicate-object" triples, and Web Ontology Language (OWL) application in education…

Description of an open quantum mechanical system

International Nuclear Information System (INIS)

Rotter, I.; Forschungszentrum Rossendorf e.V.

1994-05-01

A model for the description of an open quantum mechanical many-particle system is formulated. It starts from the shell model and treats the continuous states by a coupled channels method. The mixing of the discrete shell model states via the continuum of decay channels results in the genuine decaying states of the system. These states are eigenstates of a non-Hermitean Hamilton operator the eigenvalues of which give both the energies and the widths of the states. All correlations between two particles which are caused by the two-particle residual interaction, are taken into account including those via the continuum. In the formalism describing the open quantum mechanical system, the coupling between the system and its environment appears nonlinearly. If the resonance states start to overlap, a redistribution of the spectroscopic values ('trapping effect') takes place. As a result, the complexity of the system is reduced at high level density, structures in space and time are formed. This redistribution describes, on the one hand, the transition from the well-known nuclear properties at low level density to those at high level density and fits, on the other hand, into the concept of selforganization. (orig.)

Sound Descriptions of Haptic Experiences of Art Work by Deafblind Cochlear Implant Users

Directory of Open Access Journals (Sweden)

Riitta Lahtinen

2018-05-01

Full Text Available Deafblind persons’ perception and experiences are based on their residual auditive and visual senses, and touch. Their haptic exploration, through movements and orientation towards objects give blind persons direct, independent experience. Few studies explore the aesthetic experiences and appreciation of artefacts of deafblind people using cochlear implant (CI technology, and how they interpret and express their perceived aesthetic experience through another sensory modality. While speech recognition is studied extensively in this area, the aspect of auditive descriptions made by CI users are a less-studied domain. This present research intervention describes and analyses five different deafblind people sharing their interpretation of five statues vocally, using sounds and written descriptions based on their haptic explorations. The participants found new and multimodal ways of expressing their experiences, as well as re-experiencing them through technological aids. We also found that the CI users modify technology to better suit their personal needs. We conclude that CI technology in combination with self-made sound descriptions enhance memorization of haptic art experiences that can be re-called by the recording of the sound descriptions. This research expands the idea of auditive descriptions, and encourages user-produced descriptions as artistic supports to traditional linguistic, audio descriptions. These can be used to create personal auditive–haptic memory collections similar to how sighted create photo albums.

Computed tomography: acquisition process, technology and current state

Directory of Open Access Journals (Sweden)

Óscar Javier Espitia Mendoza

2016-02-01

Full Text Available Computed tomography is a noninvasive scan technique widely applied in areas such as medicine, industry, and geology. This technique allows the three-dimensional reconstruction of the internal structure of an object which is lighted with an X-rays source. The reconstruction is formed with two-dimensional cross-sectional images of the object. Each cross-sectional is obtained from measurements of physical phenomena, such as attenuation, dispersion, and diffraction of X-rays, as result of their interaction with the object. In general, measurements acquisition is performed with methods based on any of these phenomena and according to various architectures classified in generations. Furthermore, in response to the need to simulate acquisition systems for CT, software dedicated to this task has been developed. The objective of this research is to determine the current state of CT techniques, for this, a review of methods, different architectures used for the acquisition and some of its applications is presented. Additionally, results of simulations are presented. The main contributions of this work are the detailed description of acquisition methods and the presentation of the possible trends of the technique.

Administrative Management by Objectives. Policy 2100.

Science.gov (United States)

East Allen County Schools, New Haven, IN.

Management-by-objectives (MBO) focuses attention on objectives stated as end accomplishments rather than the activities which bring about those accomplishments. MBO identifies eight major areas of management which become involved in the process: (1) planning, (2) performance appraisal, (3) individual motivation, (4) coordination, (5) control, (6)…

Unified geometric description of black hole thermodynamics

International Nuclear Information System (INIS)

Alvarez, Jose L.; Quevedo, Hernando; Sanchez, Alberto

2008-01-01

In the space of thermodynamic equilibrium states we introduce a Legendre invariant metric which contains all the information about the thermodynamics of black holes. The curvature of this thermodynamic metric becomes singular at those points where, according to the analysis of the heat capacities, phase transitions occur. This result is valid for the Kerr-Newman black hole and all its special cases and, therefore, provides a unified description of black hole phase transitions in terms of curvature singularities.

Efficient Top-k Locality Search for Co-located Spatial Web Objects

DEFF Research Database (Denmark)

Qu, Qiang; Liu, Siyuan; Yang, Bin

2014-01-01

In step with the web being used widely by mobile users, user location is becoming an essential signal in services, including local intent search. Given a large set of spatial web objects consisting of a geographical location and a textual description (e.g., online business directory entries of re...

CODAS object monitoring service

International Nuclear Information System (INIS)

Wheatley, M.R.; Rainford, M.

2001-01-01

The primary Control and Data Acquisition System (CODAS) of JET is based on a TCP/IP network of more than 150 computers. The CODAS computers provide the JET machine control and data acquisition for over 70,000 digital and analog signals. The Object Monitoring Service (OMS) is used by applications for monitoring objects for presentation to the JET machine operators and for the operation of individual software components (such as valve state, access control, mimic definition changes and internal data distribution). Each server typically handles connections from around 60 clients monitoring upwards of 2000 objects. Some servers have over 150 clients and 5000 objects. Acquisition libraries are dynamically linked into a running server as required either to acquire data values for objects or to forward requests to other OMS servers. A mechanism involving dynamic linking allows new libraries to be integrated without stopping or changing running software. OMS provides a very reliable and highly successful 'data-type independent' means of monitoring many different objects. It allows applications to take advantage of new data sources, without the need to change existing code

Using Self-Description to Handle Change in Systems

CERN Document Server

Estrella, Florida; Le Goff, Jean-Marie; McClatchey, Richard; Murray, Steven

2002-01-01

In the web age systems must be flexible, reconfigurable and adaptable in addition to being quick to develop. As a consequence, designing systems to cater for change is becoming not only desirable but required by industry. Allowing systems to be self-describing or description-driven is one way to enable these characteristics. To address the issue of evolvability in designing self-describing systems, this paper proposes a pattern-based, object-oriented, description-driven architecture. The proposed architecture embodies four pillars - first, the adoption of a multi-layered meta-modeling architecture and reflective meta-level architecture, second, the identification of four data modeling relationships that must be made explicit such that they can be examined and modified dynamically, third, the identification of five design patterns which have emerged from practice and have proved essential in providing reusable building blocks for data management, and fourth, the encoding of the structural properties of the fiv...

Object and Objective Lost?

DEFF Research Database (Denmark)

Lopdrup-Hjorth, Thomas

2015-01-01

This paper explores the erosion and problematization of ‘the organization’ as a demarcated entity. Utilizing Foucault's reflections on ‘state-phobia’ as a source of inspiration, I show how an organization-phobia has gained a hold within Organization Theory (OT). By attending to the history...... of this organization-phobia, the paper argues that OT has become increasingly incapable of speaking about its core object. I show how organizations went from being conceptualized as entities of major importance to becoming theoretically deconstructed and associated with all kinds of ills. Through this history......, organizations as distinct entities have been rendered so problematic that they have gradually come to be removed from the center of OT. The costs of this have been rather significant. Besides undermining the grounds that gave OT intellectual credibility and legitimacy to begin with, the organization-phobia...

Descriptive review of tuberculosis surveillance systems across the circumpolar regions

Directory of Open Access Journals (Sweden)

Annie-Claude Bourgeois

2016-04-01

Full Text Available Background: Tuberculosis is highly prevalent in many Arctic areas. Members of the International Circumpolar Surveillance Tuberculosis (ICS-TB Working Group collaborate to increase knowledge about tuberculosis in Arctic regions. Objective: To establish baseline knowledge of tuberculosis surveillance systems used by ICS-TB member jurisdictions. Design: Three questionnaires were developed to reflect the different surveillance levels (local, regional and national; all 3 were forwarded to the official representative of each of the 15 ICS-TB member jurisdictions in 2013. Respondents self-identified the level of surveillance conducted in their region and completed the applicable questionnaire. Information collected included surveillance system objectives, case definitions, data collection methodology, storage and dissemination. Results: Thirteen ICS-TB jurisdictions [Canada (Labrador, Northwest Territories, Nunavik, Nunavut, Yukon, Finland, Greenland, Norway, Sweden, Russian Federation (Arkhangelsk, Khanty-Mansiysk Autonomous Okrug, Yakutia (Sakha Republic, United States (Alaska] voluntarily completed the survey – representing 2 local, 7 regional and 4 national levels. Tuberculosis reporting is mandatory in all jurisdictions, and case definitions are comparable across regions. The common objectives across systems are to detect outbreaks, and inform the evaluation/planning of public health programmes and policies. All jurisdictions collect data on confirmed active tuberculosis cases and treatment outcomes; 11 collect contact tracing results. Faxing of standardized case reporting forms is the most common reporting method. Similar core data elements are collected; 8 regions report genotyping results. Data are stored using customized programmes (n=7 and commercial software (n=6. Nine jurisdictions provide monthly, bi-annual or annual reports to principally government and/or scientific/medical audiences. Conclusion: This review successfully establishes

State of the Low-Carbon Energy Union: Assessing the EU's progress towards its 2030 and 2050 climate objectives

International Nuclear Information System (INIS)

Spencer, Thomas; Pierfederici, Roberta; Sartor, Oliver; Berghmans, Nicolas; Samadi, Sascha; Fischedick, Manfred; Knoop, Katharina; Pye, Steve; Criqui, Patrick; Mathy, Sandrine; Capros, Pantelis; Fragkos, Panagiotis; Bukowski, Maciej; Sniegocki, Aleksander; Virdis, Maria Rosa; Gaeta, Maria; Pollier, Karine; Cassisa, Cyril

2016-11-01

Rather than examining aggregate emissions trends, this study delves deep into the dynamics affecting each sector of the EU energy system. It examines the structural changes taking place in power production, transport, buildings and industry, and benchmarks these with the changes required to reach the 2030 and 2050 targets. In so doing it aims to influence both the ambition and direction of future policy decisions, both at Member State and EU level. In order to assess the adequacy of the EU and its Member States policies with the 2030 and 2050 decarbonization objectives, this study goes beyond the aggregate GHG emissions or energy use figures and analyse the underlying drivers of emission changes, following a sectoral approach (power generation, buildings, industry, and transport). Historical trends of emission drivers are compared with the required long-term deep decarbonization pathways, which provide sectoral 'benchmarks' or 'corridors' against which to analyse the rate and direction of historical change for each Member State and the EU in aggregate. This approach allows the identification of the necessary structural changes in the energy system and policy interventions to reach deep decarbonization, and therefore the comparison with the current policy programs at European and Member State level. The EU has made significant progress in the structural decarbonization of its energy system. However, despite of this progress, the EU is currently 'off-track' to achieve its objectives by 2030 and 2050. First, the rate of change is insufficient across a large number of the indicators assessed. Second, too much of the change in aggregate emissions has been driven by cyclical effects rather than structural decarbonization, notably the impact of the financial crisis and subsequent slow recovery. Third, long-term decarbonization options, for example to decarbonize industrial processes and materials, are not being adequately prepared. While some policies under the EU's 2030

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

Minimum Delay Moving Object Detection

KAUST Repository

Lao, Dong

2017-05-14

This thesis presents a general framework and method for detection of an object in a video based on apparent motion. The object moves, at some unknown time, differently than the “background” motion, which can be induced from camera motion. The goal of proposed method is to detect and segment the object as soon it moves in an online manner. Since motion estimation can be unreliable between frames, more than two frames are needed to reliably detect the object. Observing more frames before declaring a detection may lead to a more accurate detection and segmentation, since more motion may be observed leading to a stronger motion cue. However, this leads to greater delay. The proposed method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms, defined as declarations of detection before the object moves or incorrect or inaccurate segmentation at the detection time. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

50 CFR 660.412 - EFH identifications and descriptions for Pacific salmon.

Science.gov (United States)

2010-10-01

... Pacific salmon. 660.412 Section 660.412 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... COAST STATES West Coast Salmon Fisheries § 660.412 EFH identifications and descriptions for Pacific salmon. Pacific salmon essential fish habitat (EFH) includes all those water bodies occupied or...

Designing concept maps for a precise and objective description of pharmaceutical innovations

Directory of Open Access Journals (Sweden)

Iordatii Maia

2013-01-01

Full Text Available Abstract Background When a new drug is launched onto the market, information about the new manufactured product is contained in its monograph and evaluation report published by national drug agencies. Health professionals need to be able to determine rapidly and easily whether the new manufactured product is potentially useful for their practice. There is therefore a need to identify the best way to group together and visualize the main items of information describing the nature and potential impact of the new drug. The objective of this study was to identify these items of information and to bring them together in a model that could serve as the standard for presenting the main features of new manufactured product. Methods We developed a preliminary conceptual model of pharmaceutical innovations, based on the knowledge of the authors. We then refined this model, using a random sample of 40 new manufactured drugs recently approved by the national drug regulatory authorities in France and covering a broad spectrum of innovations and therapeutic areas. Finally, we used another sample of 20 new manufactured drugs to determine whether the model was sufficiently comprehensive. Results The results of our modeling led to three sub models described as conceptual maps representingi the medical context for use of the new drug (indications, type of effect, therapeutical arsenal for the same indications, ii the nature of the novelty of the new drug (new molecule, new mechanism of action, new combination, new dosage, etc., and iii the impact of the drug in terms of efficacy, safety and ease of use, compared with other drugs with the same indications. Conclusions Our model can help to standardize information about new drugs released onto the market. It is potentially useful to the pharmaceutical industry, medical journals, editors of drug databases and medical software, and national or international drug regulation agencies, as a means of describing the main

Skyrme RPA description of γ-vibrational states in rare-earth nuclei

Directory of Open Access Journals (Sweden)

Nesterenko V.O.

2016-01-01

Full Text Available The lowest γ-vibrational states with Kπ = 2+γ in well-deformed Dy, Er and Yb isotopes are investigated within the self-consistent separable quasiparticle random-phase-approximation (QRPA approach based on the Skyrme functional. The energies Eγ and reduced transition probabilities B(E2γ of the states are calculated with the Skyrme force SV-mas10. We demonstrate the strong effect of the pairing blocking on the energies of γ-vibrational states. It is also shown that collectivity of γ-vibrational states is strictly determined by keeping the Nilsson selection rules in the corresponding lowest 2qp configurations.

Guidelines for Description

NARCIS (Netherlands)

Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

2013-01-01

The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

Documentation for Grants Equal to Tax model: Volume 1, Technical description

International Nuclear Information System (INIS)

1986-01-01

A computerized model, the Grants Equal to Tax (GETT) model, was developed to assist in evaluating the amount of federal grant monies that would go to state and local jurisdictions under the provisions outlined in the Nuclear Waste Policy Act of 1982. The GETT model is capable of forecasting the amount of tax liability associated with all property owned and all activities undertaken by the US Department of Energy (DOE) in site characterization and repository development. The GETT program is a user-friendly, menu-driven model developed using dBASE III/trademark/, a relational data base management system. The data base for GETT consists primarily of eight separate dBASE III/trademark/ files corresponding to each of the eight taxes levied by state and local jurisdictions on business property and activity. Additional smaller files help to control model inputs and reporting options. Volume 1 of the GETT model documentation is a technical description of the program and its capabilities providing (1) descriptions of the data management system and its procedures; (2) formulas for calculating taxes (illustrated with flow charts); (3) descriptions of tax data base variables for the Deaf Smith County, Texas, Richton Dome, Mississippi, and Davis Canyon, Utah, salt sites; and (4) data inputs for the GETT model. 10 refs., 18 figs., 3 tabs

Nuclear Fuel Cycle Objectives

International Nuclear Information System (INIS)

2013-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world'. One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III.A.6 of the IAEA Statute, the safety standards establish 'standards of safety for protection of health and minimization of danger to life and property'. The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on, and application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in member States, implementing organizations, academia and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. The Nuclear Energy Basic Principles is the highest level publication in the IAEA Nuclear Energy Series, and describes the rationale and vision for the peaceful uses of nuclear energy. It presents eight Basic Principles on which nuclear energy systems should be based to fulfil nuclear energy's potential to help meet growing global energy needs. The Nuclear Energy Series Objectives are the second level publications. They describe what needs to be considered and the specific goals to be achieved at different stages of implementation, all of which are consistent with the Basic Principles

Description of climate, surface hydrology, and near-surface hydrogeology. Simpevarp 1.2

International Nuclear Information System (INIS)

Werner, Kent; Bosson, Emma; Berglund, Sten

2005-04-01

This report presents and evaluates the site investigations and primary data on meteorology, surface hydrology and near-surface hydrogeology that are available in the Simpevarp 1.2 'data freeze'. The main objective is to update the previous Simpevarp 1.1 description of the meteorological, surface hydrological and near-surface hydrogeological conditions in the Simpevarp area. Based on the Simpevarp 1.2 dataset, an updated conceptual and descriptive model of the surface and near-surface water flow conditions in the Simpevarp area is presented. In cases where site investigation data are not yet available, regional and/or generic data are used as input to the modelling. GIS- and process-based tools, used for initial quantitative flow modelling, are also presented. The objectives of this initial quantitative modelling are to illustrate, quantify and support the site descriptive model, and also to produce relevant input data to the ecological systems modelling within the SKB SurfaceNet framework.For the Simpevarp 1.2 model, the relevant site investigations include the establishment of one local meteorological station and surface-hydrological stations for discharge measurements, delineation and description of catchment areas, manual discharge measurements in water courses, slug tests in groundwater monitoring wells, and manual groundwater level measurements. In addition, other investigations have also contributed to the modelling, providing data on geometry (including topography), data from surface-based geological investigations and boreholes in Quaternary deposits, and data on the hydrogeological properties of the bedrock. The conceptual and descriptive modelling includes an identification and basic description of type areas, domains and interfaces between domains within the model area. The surface and near-surface flow system is described, including the assignment of hydrogeological properties to HSDs (Hydraulic Soil Domains) of Quaternary deposits based on a

Description of climate, surface hydrology, and near-surface hydrogeology. Simpevarp 1.2

Energy Technology Data Exchange (ETDEWEB)

Werner, Kent [SWECO VIAK AB/Golder Associates AB, Stockholm (Sweden); Bosson, Emma; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

2005-04-01

This report presents and evaluates the site investigations and primary data on meteorology, surface hydrology and near-surface hydrogeology that are available in the Simpevarp 1.2 'data freeze'. The main objective is to update the previous Simpevarp 1.1 description of the meteorological, surface hydrological and near-surface hydrogeological conditions in the Simpevarp area. Based on the Simpevarp 1.2 dataset, an updated conceptual and descriptive model of the surface and near-surface water flow conditions in the Simpevarp area is presented. In cases where site investigation data are not yet available, regional and/or generic data are used as input to the modelling. GIS- and process-based tools, used for initial quantitative flow modelling, are also presented. The objectives of this initial quantitative modelling are to illustrate, quantify and support the site descriptive model, and also to produce relevant input data to the ecological systems modelling within the SKB SurfaceNet framework.For the Simpevarp 1.2 model, the relevant site investigations include the establishment of one local meteorological station and surface-hydrological stations for discharge measurements, delineation and description of catchment areas, manual discharge measurements in water courses, slug tests in groundwater monitoring wells, and manual groundwater level measurements. In addition, other investigations have also contributed to the modelling, providing data on geometry (including topography), data from surface-based geological investigations and boreholes in Quaternary deposits, and data on the hydrogeological properties of the bedrock. The conceptual and descriptive modelling includes an identification and basic description of type areas, domains and interfaces between domains within the model area. The surface and near-surface flow system is described, including the assignment of hydrogeological properties to HSDs (Hydraulic Soil Domains) of Quaternary deposits based on a

A report to Congress Nuclear Regulatory Research: Project descriptions for FY88

International Nuclear Information System (INIS)

1988-08-01

This report has been written in response to a request of the United States Congress that the Nuclear Regulatory Commission prepare and submit to the Congress a summary description of its research projects. Commercial contracts and research efforts at the Department of Energy (DOE) laboratories are assigned a five-digit financial number (FIN). This report provides a project descriptions for each FIN number. The project descriptions are divided into five major sections called program areas. These areas are: integrity of reactor components, prevent damage to reactor cores, reactor containment safety, confirming safety of nuclear waste disposal, and resolving safety issues and developing regulations. An explanation of each program area is given in an overview at the beginning of each section

Biotrans functional and technical description. Report of VIEWLS WP5, modelling studies

International Nuclear Information System (INIS)

Van Tilburg, X.; Egging, R.; Londo, H.M.

2006-01-01

The overall objectives of this project are to provide structured and clear data on the availability and performance of biofuels and to identify the possibilities and strategies towards large scale sustainable production, use and trading of biofuels for the transport sector in Europe, including Central and Eastern European Countries (CEEC). The report supplements the two other reports in the work package: 'Biofuel and Bio-energy implementation scenarios - final report of VIEWLS WP5' (2005) and 'VIEWLS modelling and analysis, technical data for biofuel production chains' (2005). This document contains a functional and technical description of the BioTrans model, accompanied by a description of the system. Section 2 contains a conceptual and functional description of the biofuel model. Section 3 describes the optimisation method in technical terms, discussing aspects like the target function and constraints used. Finally, section 4 discusses the input and output requirements for the BioTrans system

On the microcanonical description D-brane thermodynamics

International Nuclear Information System (INIS)

Meana, Marco Laucelli; Penalba, Jesus Puente

1999-01-01

We study the microcanonical description of string gases in the presence of D-branes. We obtain exact expressions for the single string density of states and draw the regions in phase space where asymptotic approximations are valid. We are able to describe the whole range of energies including the SYM phase of the D-branes and we remark the importance of the infrared cut-off used in the high energy approximations. With the complete expression we can obtain the density of states of the multiple string gas and study its thermal properties, showing that the Hagedorn temperature is maximum for every system and there is never a phase transition whenever there is thermal contact among the strings attached to different D-branes

Descriptive statistics.

Science.gov (United States)

Nick, Todd G

2007-01-01

Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

Theoretical description of high-lying two-electrons states

International Nuclear Information System (INIS)

Greene, C.H.; Cavagnero, M.; Sadeghpour, H.R.

1993-01-01

Within the past two years, experiments on high-lying doubly-excited states in He and H- have shown spectra at energies near excited hydrogenic thresholds having principal quantum numbers in the range N=5--9. While they display some nontrivial complexities, the spectra are tremendously simpler than might be anticipated on the basis of independent electron models, in that only a small fraction of the total number of anticipated resonances are observed experimentally. Moreover, for principal quantum number N that are not too high, specifically N - , the resonance positions are described accurately by adiabatic calculations using hyperspherical coordinates and can be parametrized by a remarkably simple two-electron Rydberg formula. The observed propensity for excitation of only a small subset of the possible resonance states has been codified by several groups into approximate selection rules based on alternative (but apparently equivalent) classification schemes. Comparatively few attempts have been made at quantitative tests of the validity of these rules. The present review describes recent efforts to quantify their accuracy and limitations using R-matrix and quantum defect techniques, and Smith's delay-time matrix. Prospensity rules for exciting different degrees of freedom are found to differ greatly in their degree of validity

Improving Students' Reading Comprehension in Descriptive Text Through Anticipation Guide

OpenAIRE

Nasution, Maya Puspita

2014-01-01

This study concerrns with improving students' reading comprehension in descriptive text through anticipation guide.The objective was to investigate improvement of students' reading comprehension by applying anticipation guide. This research was conducted by using action research method. The subject of the study was grade VII students of SMP SWASTA TAMAN HARAPAN MEDAN totalling to 30 students. They were taught reading comprehension by anticipation guide. The instruments for collecting data wer...

Description of a practice model for pharmacist medication review in a general practice setting

DEFF Research Database (Denmark)

Brandt, Mette; Hallas, Jesper; Hansen, Trine Graabæk

2014-01-01

BACKGROUND: Practical descriptions of procedures used for pharmacists' medication reviews are sparse. OBJECTIVE: To describe a model for medication review by pharmacists tailored to a general practice setting. METHODS: A stepwise model is described. The model is based on data from the medical chart...... no indication (n=47, 23%). Most interventions were aimed at cardiovascular drugs. CONCLUSION: We have provided a detailed description of a practical approach to pharmacists' medication review in a GP setting. The model was tested and found to be usable, and to deliver a medication review with high acceptance...

The group-theoretical approach to the description of nuclear states

International Nuclear Information System (INIS)

Baktybaev, K.

2001-01-01

Study of symmetrical environmental properties, including nuclei, nuclear particles, atoms and molecules has very important, and sometimes determinative meaning. The role of visible symmetry, in other words of the world beauty is generally known, and studied for a long time. The internal symmetry of material world (isotopic, angular, gauge, dynamic etc.), playing vitally important significance for its structure, creation and development has been widely studied for last years. The development of conception of dynamic symmetry and supersymmetry in the structure of nuclear system condition and their supplement under studies of specific nuclei properties is considered in the present article. The next section includes the summary of the main point of dynamic symmetry and its connection to corresponding Lie algebra and techniques of physical operators construction through generators of chosen algebra and its subalgebra. Section 3 states the dynamic-symmetric properties of atomic nuclei collective states, which are described by the model of interactive bosons. Section 4 is dedicated to conception of dynamic supersymmetry, its supplement under structure study of quasi-particle and collective states of nuclei and all interactions. In particular, the theory is applied for study of fermion and boson states in the even isotopes Pd, Dy and Er

fundamental objectives and directives principles of state policy

African Journals Online (AJOL)

Mofasony

and Directive Principles of State policy in the Constitution of the Federal ... The Social Contract theory of the school of jurisprudence opines that the ... privatization process contrary to law and public concerns as expressed by local ... among Nigerians of different ethnic, linguistic, religions or other background and the.

Method for Statically Checking an Object-oriented Computer Program Module

Science.gov (United States)

Bierhoff, Kevin M. (Inventor); Aldrich, Jonathan (Inventor)

2012-01-01

A method for statically checking an object-oriented computer program module includes the step of identifying objects within a computer program module, at least one of the objects having a plurality of references thereto, possibly from multiple clients. A discipline of permissions is imposed on the objects identified within the computer program module. The permissions enable tracking, from among a discrete set of changeable states, a subset of states each object might be in. A determination is made regarding whether the imposed permissions are violated by a potential reference to any of the identified objects. The results of the determination are output to a user.

Appalachia: Goals, Objectives and Development Strategies

Science.gov (United States)

Appalachian Regional Commission, Washington, DC.

Goals, objectives, and strategies for development in the 13 states involved in the Appalachian Regional Commission (ARC) are detailed in this document adopted by ARC in 1977. The regional development plan incorporates earlier evaluation and program design efforts, discussion from an issues report, state comments and development plans, and public…

Elements of a Reversible Object-Oriented Language

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh; Axelsen, Holger Bock

2016-01-01

This paper presents initial ideas for the design and implementation of a reversible object-oriented language based on extending Janus with object-oriented concepts such as classes that encapsulate behavior and state, inheritance, virtual dispatching, as well as constructors. We show that virtual...... dispatching is a reversible decision mechanism easily translatable to a standard reversible programming model such as Janus, and we argue that reversible management of state can be accomplished using reversible constructors. The language is implemented in terms of translation to standard Janus programs....

Description of saturation curves and boiling process of dry air

Directory of Open Access Journals (Sweden)

Vestfálová Magda

2018-01-01

Full Text Available Air is a mixture of gases forming the gas wrap of Earth. It is formed by dry air, moisture and other pollutants. Dry air is a substance whose thermodynamic properties in gaseous state, as well as the thermodynamic properties of its main constituents in gaseous state, are generally known and described in detail in the literature. The liquid air is a bluish liquid and is industrially used to produce oxygen, nitrogen, argon and helium by distillation. The transition between the gaseous and liquid state (the condensation process, resp. boiling process, is usually displayed in the basic thermodynamic diagrams using the saturation curves. The saturation curves of all pure substances are of a similar shape. However, since the dry air is a mixture, the shapes of its saturation curves are modified relative to the shapes corresponding to the pure substances. This paper deals with the description of the dry air saturation curves as a mixture, i.e. with a description of the process of phase change of dry air (boiling process. The dry air saturation curves are constructed in the basic thermodynamic charts based on the values obtained from the literature. On the basis of diagrams, data appearing in various publications are interpreted and put into context with boiling process of dry air.

Superconducting state mechanisms and properties

CERN Document Server

Kresin, Vladimir Z; Wolf, Stuart A

2014-01-01

'Superconducting State' provides a very detailed theoretical treatment of the key mechanisms of superconductivity, including the current state of the art (phonons, magnons, and plasmons). A very complete description is given of the electron-phonon mechanism responsible for superconductivity in the majority of superconducting systems, and the history of its development, as well as a detailed description of the key experimental techniques used to study the superconducting state and determine the mechanisms. In addition, there are chapters describing the discovery and properties of the key superconducting compounds that are of the most interest for science, and applications including a special chapter on the cuprate superconductors. It provides detailed treatments of some very novel aspects of superconductivity, including multiple bands (gaps), the "pseudogap" state, novel isotope effects beyond BCS, and induced superconductivity.

Environmental Compliance and Protection Program Description Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Bechtel Jacobs

2009-02-26

The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

SWORS: a system for the efficient retrieval of relevant spatial web objects

DEFF Research Database (Denmark)

Cao, Xin; Cong, Gao; Jensen, Christian S.

2012-01-01

Spatial web objects that possess both a geographical location and a textual description are gaining in prevalence. This gives prominence to spatial keyword queries that exploit both location and textual arguments. Such queries are used in many web services such as yellow pages and maps services....

How U.S. TV Journalists talk about objectivity in 9/11 Coverage

DEFF Research Database (Denmark)

Mogensen, Kirsten

2007-01-01

The article is based on interviews with some of the journalists who covered the events on September 11, 2001, for ABC, CBS, NBC, CNN, MSNBC and FOX News. They discuss different aspect of objectivity in a professional context including balanced sourcing and a full and fair description....

Nuclear Energy General Objectives

International Nuclear Information System (INIS)

2011-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world'. One way it achieves this objective is to issue publications in various series. Two of these series are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III, paragraph A.6, of the IAEA Statute, the IAEA safety standards establish 'standards of safety for protection of health and minimization of danger to life and property.' The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are primarily written in a regulatory style, and are binding on the IAEA for its own activities. The principal users are Member State regulatory bodies and other national authorities. The IAEA Nuclear Energy Series consists of reports designed to encourage and assist research on, and development and practical application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia and politicians, among others. The information is presented in guides, reports on the status of technology and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The series complements the IAEA's safety standards, and provides detailed guidance, experience, good practices and examples on the five areas covered in the IAEA Nuclear Energy Series. The Nuclear Energy Basic Principles is the highest level publication in the IAEA Nuclear Energy Series and describes the rationale and vision for the peaceful uses of nuclear energy. It presents eight Basic Principles on which nuclear energy systems should be based to fulfil nuclear energy's potential to help meet growing global energy needs. The Nuclear Energy Series Objectives are the second level publications. They describe what needs to be

Genetic Algorithms for the Optimization of Chemical Processes Based on Problem Descriptions

Czech Academy of Sciences Publication Activity Database

Holeňa, Martin; Rodemerck, U.; Čukić, T.; Linke, D.; Dingerdissen, U.

2007-01-01

Roč. 6, č. 4 (2007), s. 615-621 ISSN 1109-2769 R&D Projects: GA ČR GA201/05/0325 Institutional research plan: CEZ:AV0Z10300504 Keywords : computer applications in chemistry * optimization methods * empirical objective function * genetic algorithms * problem-tailoring * formal description language * program generator Subject RIV: IN - Informatics, Computer Science

Model and information abstraction for description-driven systems

International Nuclear Information System (INIS)

Estrella, F.; McClatchey, R.; Kovacs, Z.; Goff, J.-M.L.

2001-01-01

A crucial factor in the creation of adaptable systems dealing with changing requirements is the suitability of the underlying technology in allowing the evolution of the system. A reflective system utilizes an open architecture where implicit system aspects are reified to become explicit first-class (meta-data) objects. These implicit system aspects are often fundamental structures which are inaccessible and immutable, and their reification as meta-data objects can serve as the basis for changes and extensions to the system, making it self-describing. To address the evolvability issue, the author proposes a reflective architecture based on two orthogonal abstractions-model abstraction and information abstraction. In this architecture the modeling abstractions allow for the separation of the description meta-data from the system aspects they represent so that they can be managed and versioned independently, asynchronously and explicitly

METHOD OF GROUP OBJECTS FORMING FOR SPACE-BASED REMOTE SENSING OF THE EARTH

Directory of Open Access Journals (Sweden)

A. N. Grigoriev

2015-07-01

Full Text Available Subject of Research. Research findings of the specific application of space-based optical-electronic and radar means for the Earth remote sensing are considered. The subject matter of the study is the current planning of objects survey on the underlying surface in order to increase the effectiveness of sensing system due to the rational use of its resources. Method. New concept of a group object, stochastic swath and stochastic length of the route is introduced. The overview of models for single, group objects and their parameters is given. The criterion for the existence of the group object based on two single objects is formulated. The method for group objects formation while current survey planning has been developed and its description is presented. The method comprises several processing stages for data about objects with the calculation of new parameters, the stochastic characteristics of space means and validates the spatial size of the object value of the stochastic swath and stochastic length of the route. The strict mathematical description of techniques for model creation of a group object based on data about a single object and onboard special complex facilities in difficult conditions of registration of spatial data is given. Main Results. The developed method is implemented on the basis of modern geographic information system in the form of a software tool layout with advanced tools of processing and analysis of spatial data in vector format. Experimental studies of the forming method for the group of objects were carried out on a different real object environment using the parameters of modern national systems of the Earth remote sensing detailed observation Canopus-B and Resurs-P. Practical Relevance. The proposed models and method are focused on practical implementation using vector spatial data models and modern geoinformation technologies. Practical value lies in the reduction in the amount of consumable resources by means of

User's Manual for the Object User Interface (OUI): An Environmental Resource Modeling Framework

Science.gov (United States)

Markstrom, Steven L.; Koczot, Kathryn M.

2008-01-01

The Object User Interface is a computer application that provides a framework for coupling environmental-resource models and for managing associated temporal and spatial data. The Object User Interface is designed to be easily extensible to incorporate models and data interfaces defined by the user. Additionally, the Object User Interface is highly configurable through the use of a user-modifiable, text-based control file that is written in the eXtensible Markup Language. The Object User Interface user's manual provides (1) installation instructions, (2) an overview of the graphical user interface, (3) a description of the software tools, (4) a project example, and (5) specifications for user configuration and extension.

Process Options Description for Vitrification Flowsheet Model of INEEL Sodium Bearing Waste

International Nuclear Information System (INIS)

Nichols, T.T.; Taylor, D.D.; Lauerhass, L.; Barnes, C.M.

2002-01-01

The technical information required for the development of a basic steady-state process simulation of the vitrification treatment train of sodium bearing waste (SBW) at Idaho National Engineering and Environmental Laboratory (INEEL) is presented. The objective of the modeling effort is to provide the predictive capability required to optimize an entire treatment train and assess system-wide impacts of local changes at individual unit operations, with the aim of reducing the schedule and cost of future process/facility design efforts. All the information required a priori for engineers to construct and link unit operation modules in a commercial software simulator to represent the alternative treatment trains is presented. The information is of a mid- to high-level nature and consists of the following: (1) a description of twenty-four specific unit operations--their operating conditions and constraints, primary species and key outputs, and the initial modeling approaches that will be used in the first year of the simulation's development; (2) three potential configurations of the unit operations (trains) and their interdependencies via stream connections; and (3) representative stream compositional makeups

Process Options Description for Vitrification Flowsheet Model of INEEL Sodium Bearing Waste

Energy Technology Data Exchange (ETDEWEB)

Nichols, T.T.; Taylor, D.D.; Lauerhass, L.; Barnes, C.M.

2002-02-21

The technical information required for the development of a basic steady-state process simulation of the vitrification treatment train of sodium bearing waste (SBW) at Idaho National Engineering and Environmental Laboratory (INEEL) is presented. The objective of the modeling effort is to provide the predictive capability required to optimize an entire treatment train and assess system-wide impacts of local changes at individual unit operations, with the aim of reducing the schedule and cost of future process/facility design efforts. All the information required a priori for engineers to construct and link unit operation modules in a commercial software simulator to represent the alternative treatment trains is presented. The information is of a mid- to high-level nature and consists of the following: (1) a description of twenty-four specific unit operations--their operating conditions and constraints, primary species and key outputs, and the initial modeling approaches that will be used in the first year of the simulation's development; (2) three potential configurations of the unit operations (trains) and their interdependencies via stream connections; and (3) representative stream compositional makeups.

[DESCRIPTIVE STUDY OF DRUGS OF ABUSE IN THE COMPLEJO HOSPITALARIO DE JAEN].

Science.gov (United States)

Alcántara Carrillo, José; Martínez Cañamero, Antonio; Martín Alcaide, Martín Ángel; Caño Garrido, Rosa; Nieto Martos, Manuela; Díaz Barranco, Ángeles

2014-12-01

Drugs is, according to the World Health Organization (WHO), any substance introduced into a living organism by any route is capable of acting on the central nervous system. For decades, drug abuse has increased in the population of our country but not all drugs are an illegal drug. The overall objective is the description of testing for drugs of abuse, and their distribution, as they were made in the Hospital Médico-Quirúrgico (HMQ) and Neurotraumatológico (HNT) of the Hospital of Jaén, in 2012. Secondary objectives analyzed the differences in the tests as variables: sex, months of the year and age of the subject (patient). We carry a description of differences by type of drug and associations of two, three, four or five drugs at once and finally, we study differences detected by drug or therapeutic use is illegal (of abuse). The results indicate a positive per 300 inhabitants, mostly men, adults and Hospital Neurotraumatológico. The most commonly detected drugs are benzodiazepines, alone or in association with cannabis.

Who actually receives cell phone use while driving citations and how much are these laws enforced among states? A descriptive, cross-sectional study.

Science.gov (United States)

Rudisill, Toni M; Zhu, Motao

2016-06-14

While numerous cell phone use while driving laws have been passed among states, little information exists regarding who gets cited for these traffic infractions and how much these laws are enforced at the state-level within the USA. Cross-sectional, descriptive study. 14 states and the District of Columbia. Those receiving cell phone use while driving citations within included states from 2007 to 2013. Demographic characteristics of cited drivers were assessed. Rates of infractions per 100 000 licensed in-state drivers per year for various cell phone use while driving violations were calculated. Drivers were cited for hand-held use violations (n=2.5 million) more than texting (n=14 682) or young driver all cell phone bans (n=342). Among states that provided data for all traffic violations, cell phone use while driving citations comprised 1% of all written citations. Regardless of ban type, males (68.2%) were cited more frequently than females. Drivers 25-64 years of age (90.8%) were more likely to be cited for hand-held phone use. The average yearly rate of infractions per 100 000 licensed in-state drivers from 2010-2013 was 5.8 for texting bans, 2607 for hand-held bans, and 9954 for any traffic violation. Among cited drivers, age and sex differences existed by the type of ban violated. State-level enforcement appeared sparse. Due to the potential serious consequences of cell phone use while driving in the USA, more enforcement and targeted public safety campaigns are likely needed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Radioactive Waste Management Objectives

International Nuclear Information System (INIS)

2011-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world'. One way it achieves this objective is to issue publications in various series. Two of these series are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III, paragraph A.6, of the IAEA Statute, the IAEA safety standards establish 'standards of safety for protection of health and minimization of danger to life and property.' The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are primarily written in a regulatory style, and are binding on the IAEA for its own activities. The principal users are Member State regulatory bodies and other national authorities. The IAEA Nuclear Energy Series consists of reports designed to encourage and assist research on, and development and practical application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia and politicians, among others. The information is presented in guides, reports on the status of technology and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The series complements the IAEA's safety standards, and provides detailed guidance, experience, good practices and examples on the five areas covered in the IAEA Nuclear Energy Series. The Nuclear Energy Basic Principles is the highest level publication in the IAEA Nuclear Energy Series and describes the rationale and vision for the peaceful uses of nuclear energy. It presents eight Basic Principles on which nuclear energy systems should be based to fulfil nuclear energy's potential to help meet growing global energy needs. The Nuclear Energy Series Objectives are the second level publications. They describe what needs to be

Descriptive set theory

CERN Document Server

Moschovakis, YN

1987-01-01

Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

Compact stellar object: the formation and structure

Energy Technology Data Exchange (ETDEWEB)

Duarte, S.B. [Centro Brasileiro de Pesquisas Fisicas (CBPF/MCT), Rio de Janeiro, RJ (Brazil)

2012-07-01

Full text: The formation of compact objects is viewed at the final stages of stellar evolution. The supernova explosion events are then focalized to explain the formation of pulsars, hybrid neutron star and the limit case of the latter, the quark stars. We discuss the stability and structure of these objects in connection with the properties of the hadron and quark-gluon plasma equation of state. The hadron-quark phase transition in deep interior of these objects is discussed taking into account the implications on the density distribution of matter along the radial direction. The role of neutrinos confinement in the ultradense stellar medium in the early stages of pulsar formation is another interesting aspect to be mentioned in this presentation. Recent results for maximum mass of compact stellar objects for different forms of equations of state will be shown, presenting some theoretical predictions for maximum mass of neutron stars allowed by different equations of state assigned to dense stellar medium. Although a density greater than few times the nuclear equilibrium density appears in deep interior of the core, at the crust the density decreases by several orders of magnitude where a variety of hadronic states appears, the 'pasta'-states of hadrons. More externally, a lattice of nuclei can be formed permeated not only by electrons but also by a large amount of free neutrons and protons. These are possible structure of neutron star crust to have the density and pressures with null values at the neutron star surface. The ultimate goal of this talk is to give a short view of the compact star area for students and those who are introducing in this subject. (author)

Recommended procedures and methodology of coal description

Science.gov (United States)

Chao, E.C.; Minkin, J.A.; Thompson, C.L.

1983-01-01

This document is the result of a workshop on coal description held for the Branch of Coal Resources of the U.S. Geological Survey in March 1982. It has been prepared to aid and encourage the field-oriented coal scientist to participate directly in petrographic coal-description activities. The objectives and past and current practices of coal description vary widely. These are briefly reviewed and illustrated with examples. Sampling approaches and techniques for collecting columnar samples of fresh coal are also discussed. The recommended procedures and methodology emphasize the fact that obtaining a good megascopic description of a coal bed is much better done in the laboratory with a binocular microscope and under good lighting conditions after the samples have been cut and quickly prepared. For better observation and cross-checking using a petrographic microscope for identification purposes, an in-place polishing procedure (requiring less than 2 min) is routinely used. Methods for using both the petrographic microscope and an automated image analysis system are also included for geologists who have access to such instruments. To describe the material characteristics of a coal bed in terms of microlithotypes or lithotypes, a new nomenclature of (V), (E), (1), (M). (S). (X1). (X2) and so on is used. The microscopic description of the modal composition of a megascopically observed lithologic type is expressed in terms of (VEIM); subscripts are used to denote the volume percentage of each constituent present. To describe a coal-bed profile, semiquantitative data (without microscopic study) and quantitative data (with microscopic study) are presented in ready-to-understand form. The average total composition of any thickness interval or of the entire coal bed can be plotted on a triangular diagram having V, E, and I+ M +S as the apices. The modal composition of any mixed lithologies such as (X1), (X2), and so on can also be plotted on such a triangular ternary diagram

Quality assurance program description: Hanford Waste Vitrification Plant, Part 1

International Nuclear Information System (INIS)

1992-01-01

This document describes the Department of Energy's Richland Field Office (DOE-RL) quality assurance (QA) program for the processing of high-level waste as well as the Vitrification Project Quality Assurance Program for the design and construction of the Hanford Waste Vitrification Plant (HWVP). It also identifies and describes the planned activities that constitute the required quality assurance program for the HWVP. This program applies to the broad scope of quality-affecting activities associated with the overall HWVP Facility. Quality-affecting activities include designing, purchasing, fabricating, handling, shipping, storing, cleaning, erecting, installing, inspecting, testing, maintaining, repairing, and modifying. Also included are the development, qualification, and production of waste forms which may be safely used to dispose of high-level radioactive waste resulting from national defense activities. The HWVP QA program is made up of many constituent programs that are being implemented by the participating organizations. This Quality Assurance program description is intended to outline and define the scope and application of the major programs that make up the HWVP QA program. It provides a means by which the overall program can be managed and directed to achieve its objectives. Subsequent parts of this description will identify the program's objectives, its scope, application, and structure

Detecting objects in radiographs for homeland security

Science.gov (United States)

Prasad, Lakshman; Snyder, Hans

2005-05-01

We present a general scheme for segmenting a radiographic image into polygons that correspond to visual features. This decomposition provides a vectorized representation that is a high-level description of the image. The polygons correspond to objects or object parts present in the image. This characterization of radiographs allows the direct application of several shape recognition algorithms to identify objects. In this paper we describe the use of constrained Delaunay triangulations as a uniform foundational tool to achieve multiple visual tasks, namely image segmentation, shape decomposition, and parts-based shape matching. Shape decomposition yields parts that serve as tokens representing local shape characteristics. Parts-based shape matching enables the recognition of objects in the presence of occlusions, which commonly occur in radiographs. The polygonal representation of image features affords the efficient design and application of sophisticated geometric filtering methods to detect large-scale structural properties of objects in images. Finally, the representation of radiographs via polygons results in significant reduction of image file sizes and permits the scalable graphical representation of images, along with annotations of detected objects, in the SVG (scalable vector graphics) format that is proposed by the world wide web consortium (W3C). This is a textual representation that can be compressed and encrypted for efficient and secure transmission of information over wireless channels and on the Internet. In particular, our methods described here provide an algorithmic framework for developing image analysis tools for screening cargo at ports of entry for homeland security.

A new Object-oriented Interface to MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G. [Associazione EURATOM-ENEA sulla Fusione, Padua (Italy); Fredian, T. [MIT Plasma Science and Fusion Center, Littleton, NH (United States); Stillerman, J. [MIT Plasma Science and Fusion Center, Cambridge, MA (United States)

2009-07-01

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multi platform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in UML. Based on this description the new API has been implemented so far in C++, Python, and Java. Fortran 90 and Matlab interfaces are foreseen in 2009. The new API provides: - Data Type Management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances; - Pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus Object API be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus. Moreover, the UML graphical definition proved an effective and unambiguous way of documenting the system components. This document is composed of an abstract followed by the presentation transparencies. (authors)

A descriptive study of the reported effects of state-mandated testing on the instructional practices and beliefs of middle school science teachers

Science.gov (United States)

Font-Rivera, Miriam Josefa

The purpose of this study was to investigate the effects of state-level testing on the instructional practices and beliefs of middle school science teachers. The study addressed four questions: (a) What are the beliefs of middle school science teachers regarding the pressure to improve their students' test scores? (b) What are the beliefs of middle school science teachers about how standardized tests influence their class time? (c) What are the attitudes of middle school science teachers toward state testing? and (d) What commonalities emerge from teachers' responses about the state tests? The sample was composed of 86 middle school science teachers from states that have state mandated testing programs in the area of science. Descriptive statistics and an inductive analysis were performed to answer the research questions. Teachers reported that they and their students were under a great amount of pressure to increase test scores from central office administrators and from the school principal. Teachers reported spending considerable time on certain test preparation activities throughout the school year. Teachers reported that the three strongest influences in instructional planning were reviewing the content and skills covered on the state tests prior to the test administration, having to prepare students for state tests, and adjusting the curriculum sequence based on the content tested by the state tests. Multiple-choice items were reported to be the most often used assessment strategy. Teachers reported that state-mandated tests were not very helpful because the test results presented an inaccurate picture of student learning. The categories formed from the teachers' written comments reflected the findings of the survey questions. Comments concentrated on the negative effects of the tests in the areas of pressure, overemphasis on the test, accountability, reduction of instructional time due to test preparation, and negative uses of state-mandated tests

Recent progress in the description of nuclei at and far away from the stability line

International Nuclear Information System (INIS)

Sharma, M.M.

1996-01-01

The relativistic mean-field (RMF) theory has witnessed a significant progress in the description of the ground-state properties of nuclei near the stability line as well as far away from it. In this paper the recent developments which have taken place in the RMF theory especially in the description of exotic nuclei very far away from the stability line is reviewed. (author). 34 refs., 8 figs

40 CFR 415.420 - Applicability; description of the hydrogen cyanide production subcategory.

Science.gov (United States)

2010-07-01

... hydrogen cyanide production subcategory. 415.420 Section 415.420 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Hydrogen Cyanide Production Subcategory § 415.420 Applicability; description of the hydrogen cyanide production subcategory. This subpart applies to discharges to waters of the United States...

40 CFR 415.220 - Applicability; description of the titanium dioxide production subcategory.

Science.gov (United States)

2010-07-01

... titanium dioxide production subcategory. 415.220 Section 415.220 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Titanium Dioxide Production Subcategory § 415.220 Applicability; description of the titanium dioxide production subcategory. This subpart applies to discharges to waters of the United States...

Ferromanganese Furnace Modelling Using Object-Oriented Principles

Energy Technology Data Exchange (ETDEWEB)

Wasboe, S.O.

1996-12-31

This doctoral thesis defines an object-oriented framework for aiding unit process modelling and applies it to model high-carbon ferromanganese furnaces. A framework is proposed for aiding modelling of the internal topology and the phenomena taking place inside unit processes. Complex unit processes may consist of a number of zones where different phenomena take place. A topology is therefore defined for the unit process itself, which shows the relations between the zones. Inside each zone there is a set of chemical species and phenomena, such as reactions, phase transitions, heat transfer etc. A formalized graphical methodology is developed as a tool for modelling these zones and their interaction. The symbols defined in the graphical framework are associated with objects and classes. The rules for linking the objects are described using OMT (Object Modeling Technique) diagrams and formal language formulations. The basic classes that are defined are implemented using the C++ programming language. The ferromanganese process is a complex unit process. A general description of the process equipment is given, and a detailed discussion of the process itself and a system theoretical overview of it. The object-oriented framework is then used to develop a dynamic model based on mass and energy balances. The model is validated by measurements from an industrial furnace. 101 refs., 119 figs., 20 tabs.

Site descriptive modelling during characterization for a geological repository for nuclear waste in Sweden

International Nuclear Information System (INIS)

Stroem, A.; Andersson, J.; Skagius, K.; Winberg, A.

2008-01-01

The Swedish programme for geological disposal of spent nuclear fuel is approaching major milestones in the form of permit applications for an encapsulation plant and a deep geologic repository. This paper presents an overview of the bedrock and surface modelling work that comprises a major part of the on-going site characterization in Sweden and that results in syntheses of the sites, called site descriptions. The site description incorporates descriptive models of the site and its regional setting, including the current state of the geosphere and the biosphere as well as natural processes affecting long-term evolution. The site description is intended to serve the needs of both repository engineering with respect to layout and construction, and safety assessment, with respect to long-term performance. The development of site-descriptive models involves a multi-disciplinary interpretation of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and ecosystems using input in the form of available data for the surface and from deep boreholes

Quasi-objects, Cult Objects and Fashion Objects

DEFF Research Database (Denmark)

Andersen, Bjørn Schiermer

2011-01-01

This article attempts to rehabilitate the concept of fetishism and to contribute to the debate on the social role of objects as well as to fashion theory. Extrapolating from Michel Serres’ theory of the quasi-objects, I distinguish two phenomenologies possessing almost opposite characteristics. T...... as a unique opportunity for studying the interchange between these two forms of fetishism and their respective phenomenologies. Finally, returning to Serres, I briefly consider the theoretical consequences of introducing the fashion object as a quasi-object.......This article attempts to rehabilitate the concept of fetishism and to contribute to the debate on the social role of objects as well as to fashion theory. Extrapolating from Michel Serres’ theory of the quasi-objects, I distinguish two phenomenologies possessing almost opposite characteristics....... These two phenomenologies are, so I argue, essential to quasi-object theory, yet largely ignored by Serres’ sociological interpreters. They correspond with the two different theories of fetishism found in Marx and Durkheim, respectively. In the second half of the article, I introduce the fashion object...

Translation of a High-Level Temporal Model into Lower Level Models: Impact of Modelling at Different Description Levels

DEFF Research Database (Denmark)

Kraft, Peter; Sørensen, Jens Otto

2001-01-01

The paper attempts theoretically to clarify the interrelation between various levels of descriptions used in the modelling and the programming of information systems. We suggest an analysis where we characterise the description levels with respect to how precisely they may handle information abou...... and other textual models. We also consider the aptness of models that include procedural mechanisms such as active and object databases...

Bare and effective fluid description in brane world cosmology

Energy Technology Data Exchange (ETDEWEB)

Cruz, Norman [Universidad de Santiago, Departamento de Fisica, Facultad de Ciencia, Casilla 307, Santiago (Chile); Lepe, Samuel; Saavedra, Joel [Pontificia Universidad Catolica de Valparaiso, Instituto de Fisica, Casilla 4950, Valparaiso (Chile); Pena, Francisco [Universidad de La Frontera, Departamento de Ciencias Fisicas, Facultad de Ingenieria, Ciencias y Administracion, Avda. Francisco Salazar 01145, Casilla 54-D, Temuco (Chile)

2010-03-15

An effective fluid description, for a brane world model in five dimensions, is discussed for both signs of the brane tension. We found several cosmological scenarios where the effective equation differs widely from the bare equation of state. For universes with negative brane tension, with a bare fluid satisfying the strong energy condition, the effective fluid can cross the barrier {omega} {sub eff}=-1. (orig.)

Methodology for geometric modelling. Presentation and administration of site descriptive models; Metodik foer geometrisk modellering. Presentation och administration av platsbeskrivande modeller

Energy Technology Data Exchange (ETDEWEB)

Munier, Raymond [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Hermanson, Jan [Golder Associates (Sweden)

2001-03-01

This report presents a methodology to construct, visualise and present geoscientific descriptive models based on data from the site investigations, which the SKB currently performs, to build an underground nuclear waste disposal facility in Sweden. It is designed for interaction with SICADA (SKB:s site characterisation database) and RVS (SKB:s Rock Visualisation System). However, the concepts of the methodology are general and can be used with other tools capable of handling 3D geometries and parameters. The descriptive model is intended to be an instrument where site investigation data from all disciplines are put together to form a comprehensive visual interpretation of the studied rock mass. The methodology has four main components: 1. Construction of a geometrical model of the interpreted main structures at the site. 2. Description of the geoscientific characteristics of the structures. 3. Description and geometrical implementation of the geometric uncertainties in the interpreted model structures. 4. Quality system for the handling of the geometrical model, its associated database and some aspects of the technical auditing. The geometrical model forms a basis for understanding the main elements and structures of the investigated site. Once the interpreted geometries are in place in the model, the system allows for adding descriptive and quantitative data to each modelled object through a system of intuitive menus. The associated database allows each geometrical object a complete quantitative description of all geoscientific disciplines, variabilities, uncertainties in interpretation and full version history. The complete geometrical model and its associated database of object descriptions are to be recorded in a central quality system. Official, new and old versions of the model are administered centrally in order to have complete quality assurance of each step in the interpretation process. The descriptive model is a cornerstone in the understanding of the

Effective liquid drop description for alpha decay of atomic nuclei

International Nuclear Information System (INIS)

Tavares, O.A.P.; Duarte, S.B.; Rodriguez, O.; Guzman, F.; Goncalves, M.; Garcia, F.

1998-06-01

Alpha decay half-lives are presented in the framework of an effective liquid drop model for different combination of mass transfer descriptions and inertia coefficients. Calculated half-life-values for ground-state to ground-state favoured alpha transitions are compared with available, updated experimental data. Results have shown that the present model is very suitable to treat the alpha decay process on equal foot as cluster radioactivity and cold fission processes. Better agreement with the data is found when the sub-set of even-even alpha emitters are considered in the calculation. (author)

29 CFR 1952.220 - Description of the plan as initially approved.

Science.gov (United States)

2010-07-01

... respecting safety and health of employees in all workplaces of the State with the exception of employees of... requirements of the Occupational Safety and Health Act of 1970 and is consistent with the Constitution and laws...) The plan description documents including the Tennessee Occupational Safety and Health Act, the...

Solid-state laser engineering

CERN Document Server

Koechner, Walter

1992-01-01

This book is written from an industrial perspective and provides a detailed discussion of solid-state lasers, their characteristics, design and construction. Emphasis is placed on engineering and practical considerations. The book is aimed mainly at the practicing scientist or engineer who is interested in the design or use of solid-state lasers, but the comprehensive treatment of the subject will make the work useful also to students of laser physics who seek to supplement their theoretical knowledge with engineering information. In order to present the subject as clearly as possible, phenomenological descriptions using models have been used rather than abstract mathematical descriptions. This results in a simplified presentation. The descriptions are enhanced by the inclusion of numerical and technical data, tables and graphs. This new edition has been updated and revised to take account of important new developments, concepts, and technologies that have emerged since the publication of the first and second...

Synchronous Parallel Emulation and Discrete Event Simulation System with Self-Contained Simulation Objects and Active Event Objects

Science.gov (United States)

Steinman, Jeffrey S. (Inventor)

1998-01-01

The present invention is embodied in a method of performing object-oriented simulation and a system having inter-connected processor nodes operating in parallel to simulate mutual interactions of a set of discrete simulation objects distributed among the nodes as a sequence of discrete events changing state variables of respective simulation objects so as to generate new event-defining messages addressed to respective ones of the nodes. The object-oriented simulation is performed at each one of the nodes by assigning passive self-contained simulation objects to each one of the nodes, responding to messages received at one node by generating corresponding active event objects having user-defined inherent capabilities and individual time stamps and corresponding to respective events affecting one of the passive self-contained simulation objects of the one node, restricting the respective passive self-contained simulation objects to only providing and receiving information from die respective active event objects, requesting information and changing variables within a passive self-contained simulation object by the active event object, and producing corresponding messages specifying events resulting therefrom by the active event objects.

Three Object-Oriented enhancement for EPICS

Science.gov (United States)

Osberg, E. A.; Dohan, D. A.; Richter, R.; Biggs, R.; Chillara, K.; Wade, D.; Bossom, J.

1994-12-01

In line with our group's intention of producing software using, where possible, Object-Oriented methodologies and techniques in the development of RF control systems, we have undertaken three projects to enhance the EPICS software environment. Two of the projects involve interfaces to EPICs Channel Access from Object-Oriented languages. The third is an enhancement to the EPICS State Notation Language to better support the Shlaer-Mellor Object-Oriented Analysis and Design Methodology. This paper discusses the motivation, approaches, results and future directions of these three projects.

Portrait of leptospirosis in the State of Acre, Brazil

Directory of Open Access Journals (Sweden)

Eloizy Mariana Dias de Medeiros Cirilo Costa

2017-03-01

Full Text Available Introduction: Leptospirosis is an acute bacterial disease, that has global distribution and manifests itself in subclinical or asymptomatic way, having mild or severe conditions that can lead to the death of the patient. Objective: To identify, among the municipalities of the state of Acre, Brazil, those with the highest incidence of leptospirosis between 2010 and 2015, and in addition, to determine the prevalence of this disease between the sexes. Methods: Descriptive study, of documentary character, with epidemiological base and quantitative approach. It was made by available documents through the Department of Informatics of the Unified Health System of Brazil (DATASUS and also by the Health Secretary of State of Acre (SESACRE. Variables were selected as sex, age and year of notification. Regarding the analysis, it is emphasized that it was quantitative and descriptive and the results were presented in tables built in Microsoft Word. Results: It was found that the capital of the state of Acre, Rio Branco, led every year, contributing to the higher proportion of notifications related to leptospirosis. Regarding gender, there was a predilection for males and among age groups, the period of 20 to 39 years contributes to the greater number of cases of the disease. Conclusion: Leptospirosis is a worldwide public health problem and in the state of Acre, the high rainfall, the agglomeration of low income combined with inadequate sanitation, collaborate to infestation of transmitters animals, providing high rates of the disease. Thus, it appears that these high numbers can probably be attributed to the ineffectiveness of preventive activities, as well as insufficient investment directed to social policies and infrastructure sectors. Keywords: Infectious Disease. Leptospirosis. Prevalence. Incidence.

Brief description of the Wackersdorf Reprocessing Facility

International Nuclear Information System (INIS)

1986-01-01

The DWK is now planning the construction and operation of a facility for the reprocessing of spent fuel elements and the fabrication of mixed-oxide fuel elements which will initially have an average daily throughput of 2 tons (t) of nuclear fuel. The application required by the Atomic Law was submitted to the Bavarian State Ministry for State Development and Environmental Matters on October 28, 1982. According to Par. 3, Section 1, No. 1 of the Atomic Law Procedural Ordinance such an application for permission in accordance with par. 7 AtL must explicitly be accompanied by a safety report which shall make it possible for third parties to make a judgment whether the impacts associated with the facility and its operation could damage their rights. The safety report is intended to present and explain the concept of the facility, the safety-technological design bases, and the operation of the plant, including its operation and safety systems and the impacts and proposed preventive measures. In addition to the detailed presentations in the safety report, Par. 3 of the Atomic Law Procedural Ordinance also requires a brief description of the plant designed for general public understanding, suitable for the design, which will also explain the expected impacts on the general environment and the surrounding area. Hence the brief description presents and explains the following matters: the site; the technology and state of the art for reprocessing of spent nuclear fuel; the structure and function of the proposed facility; safety provisions of the proposed facility and the management of perturbations in operation; the impacts of the facility and its operation on the environment; measures to be taken for dealing with the radioactive wastes; and provisions for ultimate shut-down of the facility

The Development, Field Testing and Evaluation of Three Hierarchies of Behaviorally Stated Objectives for the Chemistry Content of a Course of Instruction in Physical Science for Pre-Service Nursing Students.

Science.gov (United States)

Love, Robert Alden

The purpose of this research was to develop hierarchies of behavioral objectives for the chemistry content of a one-semester course in physical science for preservice associate degree nursing students. Each of three content objectives was expressed by a series of behaviorally stated objectives which included a terminal objective for a unit of…

40 CFR 415.340 - Applicability; description of the chrome pigments production subcategory.

Science.gov (United States)

2010-07-01

... chrome pigments production subcategory. 415.340 Section 415.340 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Chrome Pigments Production Subcategory § 415.340 Applicability; description of the chrome pigments production subcategory. This subpart applies to discharges to waters of the United States and...

Object-oriented sociology and organizing in the face of emergency: Bruno Latour, Graham Harman and the material turn.

Science.gov (United States)

Pierides, Dean; Woodman, Dan

2012-12-01

This paper explores the material turn in sociology and the tools it provides for understanding organizational problems highlighted by the Royal Commission into the 2009 'Black Saturday' bushfires during which 173 people died in the Australian State of Victoria. Often inspired by Bruno Latour's material-semiotic sociology of associations, organization scholars employing these tools focus on the messy details of organization otherwise overlooked by approaches assuming a macroscopic frame of analysis. In Latour's approach no object is reducible to something else - such as nature, the social, or atoms - it is instead a stabilized set of relations. A Latourian approach allows us to highlight how the Royal Commission and macroscopic models of organizing do unwitting damage to their objects of inquiry by purifying the 'natural' from the 'social'. Performative elements in their schemas are mistaken for descriptive ones. However, a long standing critique of this approach claims that it becomes its own form of reduction, to nothing but relations. Graham Harman, in his object-oriented philosophy develops this critique by showing that a 'relationist' metaphysics cannot properly accommodate the capacity of 'objects' to cause or mediate surprises. Through our case of the Victorian Bushfires Royal Commission, we argue that a purely relational model of objects loosens a productive tension between the structural and ephemeral that drives sociological analysis. By drawing on elements of Harman's ontology of objects we argue that it is necessary for material-semiotic sociology to retain a central place for the emergence of sociological objects. © London School of Economics and Political Science 2012.

Genre based Approach to Teach Writing Descriptive Text

Directory of Open Access Journals (Sweden)

Putu Ngurah Rusmawan

2017-10-01

Full Text Available This study aims to discuss how teaching and learning activities were carried out by using Genre based Approach in teaching writing descriptive text at junior high school. This study was conducted in the classroom of VII-1. Therefore, the appropriate design was qualitative research design. The subject of the study was the English teacher. To collect data, the researcher used observation and interview. The finding of the study described that the teaching and learning activities that were carried out by the teacher fulfilled the basic competencies. The teacher carried out the opening teaching activities by greeting, asking the students’ preparation during the lesson, checking the student’s attendance list, and informing the learning objective. The teacher carried out the main teaching activities by informing about how to write a descriptive text, giving, and asking opinions, eliciting the students’ understanding, prompting and directing to do exercises. The teacher carried out the closing teaching activities by directing the student to continue at home and eliciting the students’ reflection of what they could learn at that time.

Discourse Factors Influencing Spatial Descriptions in English and German

Science.gov (United States)

Vorwerg, Constanze; Tenbrink, Thora

The ways in which objects are referred to by using spatial language depend on many factors, including the spatial configuration and the discourse context. We present the results of a web experiment in which speakers were asked to either describe where a specified item was located in a picture containing several items, or which item was specified. Furthermore, conditions differed as to whether the first six configurations were specifically simple or specifically complex. Results show that speakers' spatial descriptions are more detailed if the question is where rather than which, mirroring the fact that contrasting the target item from the others in which tasks may not always require an equally detailed spatial description as in where tasks. Furthermore, speakers are influenced by the complexity of initial configurations in intricate ways: on the one hand, individual speakers tend to self-align with respect to their earlier linguistic strategies; however, also a contrast effect could be identified with respect to the usage of combined projective terms.

On the description of electronic final states in the K-shell ionization by protons

International Nuclear Information System (INIS)

Aashamar, O.; Kocbach, L.

1976-06-01

The choice of free electronic wave functions in the description of K-shell ionization by protons is discussed. The previously known discrepancies between PWBA and SCA results are shown to be entirely due to two different choices of electronic wave functions. Calculations in the SCA framework with Hartree-Fock-Slater wave functions are reported. Some general features of the SCA calculations are discussed. (Auth.)

Quantum mechanics. An epistemological revolution that is revealed in the description of micro-states

International Nuclear Information System (INIS)

Mugur-Schachter, M.

2009-01-01

The author deals with the issue of why quantum mechanics is so difficult to understand. The answer is identified here: the quantum formalism includes the principles of a radical revolution in epistemology. The development of these principles has led to an entire re-shaping of how to generate knowledge in sciences. It is a description of what lays behind quantum mechanics in terms of conceptualization. (A.C.)

Operator symbols in the description of observable-state systems

International Nuclear Information System (INIS)

Lassner, G.A.

1978-01-01

For the observable-state system of finite degree of freedom N topological properties of the kernels and symbols belonging to the considered operators are investigated. For the operators of the observable algebra of rho + (delta) kernels and symbols are distributions and for density matrices p they are smooth functions

Toward Self-Referential Autonomous Learning of Object and Situation Models.

Science.gov (United States)

Damerow, Florian; Knoblauch, Andreas; Körner, Ursula; Eggert, Julian; Körner, Edgar

2016-01-01

Most current approaches to scene understanding lack the capability to adapt object and situation models to behavioral needs not anticipated by the human system designer. Here, we give a detailed description of a system architecture for self-referential autonomous learning which enables the refinement of object and situation models during operation in order to optimize behavior. This includes structural learning of hierarchical models for situations and behaviors that is triggered by a mismatch between expected and actual action outcome. Besides proposing architectural concepts, we also describe a first implementation of our system within a simulated traffic scenario to demonstrate the feasibility of our approach.

State-to-state modeling of non-equilibrium air nozzle flows

Science.gov (United States)

Nagnibeda, E.; Papina, K.; Kunova, O.

2018-05-01

One-dimensional non-equilibrium air flows in nozzles are studied on the basis of the state-to-state description of vibrational-chemical kinetics. Five-component mixture N2/O2/NO/N/O is considered taking into account Zeldovich exchange reactions of NO formation, dissociation, recombination and vibrational energy transitions. The equations for vibrational and chem-ical kinetics in a flow are coupled to the conservation equations of momentum and total energy and solved numerically for different conditions in a nozzle throat. The vibrational distributions of nitrogen and oxygen molecules, number densities of species as well as the gas temperature and flow velocity along a nozzle axis are analysed using the detailed state-to-state flow description and in the frame of the simplified one-temperature thermal equilibrium kinetic model. The comparison of the results showed the influence of non-equilibrium kinetics on macroscopic nozzle flow parameters. In the state-to-state approach, non-Boltzmann vibrational dis-tributions of N2 and O2 molecules with a plateau part at intermediate levels are found. The results are found with the use of the complete and simplified schemes of reactions and the impact of exchange reactions, dissociation and recombination on variation of vibrational level populations, mixture composition, gas velocity and temperature along a nozzle axis is shown.

Correlation Matrix Of Farmers Perceived Objectives In Crop ...

African Journals Online (AJOL)

The study examined the correlation matrix of farmers perceived objectives in crop production in Emohua and Etche local government areas of Rivers State, Nigeria. ... It was found that small holder farmers have multiple objectives which were ...

Spectral types for objects in the Kiso survey. IV - Data for 81 stars

Science.gov (United States)

Wegner, Gary; Mcmahan, Robert K.

1988-01-01

Spectroscopy and spectral types for 81 ultraviolet-excess objects found in the Kiso Schmidt-camera survey are reported. The data were secured with the McGraw-Hill 1.3 m telescope at 8-A resolution covering the wavelength interval 4000 -7200 A using the Mark II spectrograph. Descriptions of the spectra of some of the more peculiar objects found in this sample are given and include 14 sub-dwarfs, 23 definite DA white dwarfs, including a magnetic one, and one DQ whie dwarf, eight quasars and emission-line objects, and a new composite DA + dM system. More spectroscopy of the new cataclysmic variable KUV 01584-0939 and a possibly related object is also described.

Overt attention in natural scenes: objects dominate features.

Science.gov (United States)

Stoll, Josef; Thrun, Michael; Nuthmann, Antje; Einhäuser, Wolfgang

2015-02-01

Whether overt attention in natural scenes is guided by object content or by low-level stimulus features has become a matter of intense debate. Experimental evidence seemed to indicate that once object locations in a scene are known, salience models provide little extra explanatory power. This approach has recently been criticized for using inadequate models of early salience; and indeed, state-of-the-art salience models outperform trivial object-based models that assume a uniform distribution of fixations on objects. Here we propose to use object-based models that take a preferred viewing location (PVL) close to the centre of objects into account. In experiment 1, we demonstrate that, when including this comparably subtle modification, object-based models again are at par with state-of-the-art salience models in predicting fixations in natural scenes. One possible interpretation of these results is that objects rather than early salience dominate attentional guidance. In this view, early-salience models predict fixations through the correlation of their features with object locations. To test this hypothesis directly, in two additional experiments we reduced low-level salience in image areas of high object content. For these modified stimuli, the object-based model predicted fixations significantly better than early salience. This finding held in an object-naming task (experiment 2) and a free-viewing task (experiment 3). These results provide further evidence for object-based fixation selection--and by inference object-based attentional guidance--in natural scenes. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Advances in RGB and RGBD Generic Object Trackers

KAUST Repository

Bibi, Adel

2016-04-01

Visual object tracking is a classical and very popular problem in computer vision with a plethora of applications such as vehicle navigation, human computer interface, human motion analysis, surveillance, auto-control systems and many more. Given the initial state of a target in the first frame, the goal of tracking is to predict states of the target over time where the states describe a bounding box covering the target. Despite numerous object tracking methods that have been proposed in recent years [1-4], most of these trackers suffer a degradation in performance mainly because of several challenges that include illumination changes, motion blur, complex motion, out of plane rotation, and partial or full occlusion, while occlusion is usually the most contributing factor in degrading the majority of trackers, if not all of them. This thesis is devoted to the advancement of generic object trackers tackling different challenges through different proposed methods. The work presented propose four new state-of-the-art trackers. One of which is 3D based tracker in a particle filter framework where both synchronization and registration of RGB and depth streams are adjusted automatically, and three works in correlation filters that achieve state-of-the-art performance in terms of accuracy while maintaining reasonable speeds.

Determining characteristics of artificial near-Earth objects using observability analysis

Science.gov (United States)

Friedman, Alex M.; Frueh, Carolin

2018-03-01

Observability analysis is a method for determining whether a chosen state of a system can be determined from the output or measurements. Knowledge of state information availability resulting from observability analysis leads to improved sensor tasking for observation of orbital debris and better control of active spacecraft. This research performs numerical observability analysis of artificial near-Earth objects. Analysis of linearization methods and state transition matrices is performed to determine the viability of applying linear observability methods to the nonlinear orbit problem. Furthermore, pre-whitening is implemented to reformulate classical observability analysis. In addition, the state in observability analysis is typically composed of position and velocity; however, including object characteristics beyond position and velocity can be crucial for precise orbit propagation. For example, solar radiation pressure has a significant impact on the orbit of high area-to-mass ratio objects in geosynchronous orbit. Therefore, determining the time required for solar radiation pressure parameters to become observable is important for understanding debris objects. In order to compare observability analysis results with and without measurement noise and an extended state, quantitative measures of observability are investigated and implemented.

Virtual learning object and environment: a concept analysis.

Science.gov (United States)

Salvador, Pétala Tuani Candido de Oliveira; Bezerril, Manacés Dos Santos; Mariz, Camila Maria Santos; Fernandes, Maria Isabel Domingues; Martins, José Carlos Amado; Santos, Viviane Euzébia Pereira

2017-01-01

To analyze the concept of virtual learning object and environment according to Rodgers' evolutionary perspective. Descriptive study with a mixed approach, based on the stages proposed by Rodgers in his concept analysis method. Data collection occurred in August 2015 with the search of dissertations and theses in the Bank of Theses of the Coordination for the Improvement of Higher Education Personnel. Quantitative data were analyzed based on simple descriptive statistics and the concepts through lexicographic analysis with support of the IRAMUTEQ software. The sample was made up of 161 studies. The concept of "virtual learning environment" was presented in 99 (61.5%) studies, whereas the concept of "virtual learning object" was presented in only 15 (9.3%) studies. A virtual learning environment includes several and different types of virtual learning objects in a common pedagogical context. Analisar o conceito de objeto e de ambiente virtual de aprendizagem na perspectiva evolucionária de Rodgers. Estudo descritivo, de abordagem mista, realizado a partir das etapas propostas por Rodgers em seu modelo de análise conceitual. A coleta de dados ocorreu em agosto de 2015 com a busca de dissertações e teses no Banco de Teses e Dissertações da Coordenação de Aperfeiçoamento de Pessoal de Nível Superior. Os dados quantitativos foram analisados a partir de estatística descritiva simples e os conceitos pela análise lexicográfica com suporte do IRAMUTEQ. A amostra é constituída de 161 estudos. O conceito de "ambiente virtual de aprendizagem" foi apresentado em 99 (61,5%) estudos, enquanto o de "objeto virtual de aprendizagem" em apenas 15 (9,3%). Concluiu-se que um ambiente virtual de aprendizagem reúne vários e diferentes tipos de objetos virtuais de aprendizagem em um contexto pedagógico comum.

Setting objectives for managing Key deer

Science.gov (United States)

Diefenbach, Duane R.; Wagner, Tyler; Stauffer, Glenn E.

2014-01-01

The U.S. Fish and Wildlife Service (FWS) is responsible for the protection and management of Key deer (Odocoileus virginianus clavium) because the species is listed as Endangered under the Endangered Species Act (ESA). The purpose of the ESA is to protect and recover imperiled species and the ecosystems upon which they depend. There are a host of actions that could possibly be undertaken to recover the Key deer population, but without a clearly defined problem and stated objectives it can be difficult to compare and evaluate alternative actions. In addition, management goals and the acceptability of alternative management actions are inherently linked to stakeholders, who should be engaged throughout the process of developing a decision framework. The purpose of this project was to engage a representative group of stakeholders to develop a problem statement that captured the management problem the FWS must address with Key deer and identify objectives that, if met, would help solve the problem. In addition, the objectives were organized in a hierarchical manner (i.e., an objectives network) to show how they are linked, and measurable attributes were identified for each objective. We organized a group of people who represented stakeholders interested in and potentially affected by the management of Key deer. These stakeholders included individuals who represented local, state, and federal governments, non-governmental organizations, the general public, and local businesses. This stakeholder group met five full days over the course of an eight-week period to identify objectives that would address the following problem:“As recovery and removal from the Endangered Species list is the purpose of the Endangered Species Act, the U.S. Fish and Wildlife Service needs a management approach that will ensure a sustainable, viable, and healthy Key deer population. Urbanization has affected the behavior and population dynamics of the Key deer and the amount and characteristics

Asymptotic behaviour of optimal fraction-rational series of the perturbation theory at description of molecular rotational spectra

International Nuclear Information System (INIS)

Burenin, A.V.

1994-01-01

A possibility is shown of substantial expansion of the choice of asymptotic behaviour of optimal fraction-rational series of the perturbation theory on description of molecular rotational spectra. The expansion permits to hope for substantial improvement of results of using the conception of effective rotational hamiltonian in a fraction-rational form on the description of highly perturbed vibrational states

The appropriateness of XML for diagnostic description

Energy Technology Data Exchange (ETDEWEB)

Neto, A. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)], E-mail: andre.neto@cfn.ist.utl.pt; Lister, J.B. [CRPP-EPFL, Association EURATOM-Confederation Suisse, 1015 Lausanne (Switzerland); Fernandes, H. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Yonekawa, I. [JAEA, Japan Atomic Energy Agency Naka (Japan); Varandas, C.A.F. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)

2007-10-15

A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented.

The appropriateness of XML for diagnostic description

International Nuclear Information System (INIS)

Neto, A.; Lister, J.B.; Fernandes, H.; Yonekawa, I.; Varandas, C.A.F.

2007-01-01

A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented

Efficiency audit for IT-systems of state management strategic objects

Directory of Open Access Journals (Sweden)

Abasov V.A.

2017-06-01

Full Text Available Hackers’ attacks at the end of 2016 and at the beginning of 2017 р. on governmental information and telecommunication systems, including Ministry of Finance in Ukraine, and State Treasury Department, caused vast delays in budgetary payments. They showed «sensitiveness» and insecurity of governmental institutions for cyber-attacks because of control absence of three main security measures, such as technical limitations for downloading programs, limited use of rights for local administrators, systematical software renewals. International experience shows these security measures of governmental IT-systems have to be the audit subject of state financial control authorities. The base of information technology audit was initiated in the studies of І.К. Drozd, S.V. Іvachnenkova, М.М. Benko, Ju.А. Кuxminskiy, А.V. Мamyshev. Simultaneously, the issue of IT-system state audit was examined in theoretical researches partially because there is no practice of such audit in Ukraine. That is why it is necessary to learn international practice of efficiency audit for IT-systems and world standards for establishments of state management sector. The research allowed to propose the methodology of efficiency audit for IT-systems for state institutions; the methodology provides planning and conducting the main procedures on the base of risk estimation of security threats for information systems. The author determines the peculiarities in security risk management for IT-systems by means of risk estimation of security components of IT-systems while conducting efficiency audit. The author sets the method of descending step-by-step detailing for audit estimation of IT-system risk management efficiency at strategic enterprises belonging to state management sector by means of adaptation of ISSAI standard norms. The paper proposes three possible options of management solution concerning IT-system risk management efficiency on the base of information about the

Application of State Analysis and Goal-based Operations to a MER Mission Scenario

Science.gov (United States)

Morris, John Richard; Ingham, Michel D.; Mishkin, Andrew H.; Rasmussen, Robert D.; Starbird, Thomas W.

2006-01-01

State Analysis is a model-based systems engineering methodology employing a rigorous discovery process which articulates operations concepts and operability needs as an integrated part of system design. The process produces requirements on system and software design in the form of explicit models which describe the system behavior in terms of state variables and the relationships among them. By applying State Analysis to an actual MER flight mission scenario, this study addresses the specific real world challenges of complex space operations and explores technologies that can be brought to bear on future missions. The paper first describes the tools currently used on a daily basis for MER operations planning and provides an in-depth description of the planning process, in the context of a Martian day's worth of rover engineering activities, resource modeling, flight rules, science observations, and more. It then describes how State Analysis allows for the specification of a corresponding goal-based sequence that accomplishes the same objectives, with several important additional benefits.

29 CFR 1952.150 - Description of the plan as initially approved.

Science.gov (United States)

2010-07-01

... Carolina § 1952.150 Description of the plan as initially approved. (a) The Department of Labor has been designated by the Governor of North Carolina to administer the plan throughout the State. The Department of... are not covered by the Federal act by virtue of section 4(b)(1) thereof, dockside maritime and...

Evaluating State-of-the-art Object Detector on Challenging Traffic Light Data

DEFF Research Database (Denmark)

Jensen, Morten Bornø; Nasrollahi, Kamal; Moeslund, Thomas B.

2017-01-01

-of-the-art, real-time object detection system You Only Look Once, (YOLO) on the public LISA Traffic Light dataset available through the VIVA-challenge, which contain a high number of annotated traffic lights, captured in varying light and weather conditions. The YOLO object detector achieves an AUC of impres...

Simulation analysis of photometric data for attitude estimation of unresolved space objects

Science.gov (United States)

Du, Xiaoping; Gou, Ruixin; Liu, Hao; Hu, Heng; Wang, Yang

2017-10-01

The attitude information acquisition of unresolved space objects, such as micro-nano satellites and GEO objects under the way of ground-based optical observations, is a challenge to space surveillance. In this paper, a useful method is proposed to estimate the SO attitude state according to the simulation analysis of photometric data in different attitude states. The object shape model was established and the parameters of the BRDF model were determined, then the space object photometric model was established. Furthermore, the photometric data of space objects in different states are analyzed by simulation and the regular characteristics of the photometric curves are summarized. The simulation results show that the photometric characteristics are useful for attitude inversion in a unique way. Thus, a new idea is provided for space object identification in this paper.

Detailed description of an SSAC at the facility level for a low-enriched uranium conversion and fuel fabrication facility

International Nuclear Information System (INIS)

Jones, R.J.

1984-09-01

Some States have expressed a need for more detailed guidance with regard to the technical elements in the design and operation of SSACs for both the national and the international objectives. To meet this need the present document has been prepared, describing the technical elements of an SSAC in considerable detail. The purpose of this document is therefore, to provide a detailed description of a system for the accounting for and control of nuclear material in a model low enriched uranium conversion and fuel fabrication facility which can be used by a facility operator to establish his own system in a way which will provide the necessary information for compliance with a national system for nuclear material accounting and control and for the IAEA to carry out its safeguards responsibilities

Regional hydrogeological simulations using CONECTFLOW. Preliminary site description. Laxemar sub area - version 1.2

International Nuclear Information System (INIS)

Hartley, Lee; Hunter, Fiona; Jackson, Peter; McCarthy, Rachel; Gylling, Bjoern; Marsic, Niko

2006-04-01

The main objective of this study is to support the development of a preliminary Site Description of the Laxemar subarea on a regional-scale based on the available data of November 2004 (Data Freeze L1.2). A more specific objective of this study is to assess the role of both known and less quantified hydrogeological conditions in determining the present-day distribution of saline groundwater in the Laxemar subarea on a regional-scale. An improved understanding of the palaeo-hydrogeology is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. This is to serve as a basis for describing the present hydrogeological conditions on a local-scale, as well as predictions of future hydrogeological conditions. Another objective is to assess the flow-paths from the local-scale model domain, based on the present-day flow conditions, to assess the distribution of discharge and recharge areas connected to the flow at the approximate repository depth to inform the Preliminary Safety Evaluation. Significant new features incorporated in the modelling include: a depth variation in hydraulic properties within the deformation zones; a dependence on rock domain and depth in the rock mass properties in regional-scale models; a more detailed model of the overburden in terms of a layered system of spatially variable thickness made up of several different types of Quaternary deposits has been implemented; and several variants on the position of the watertable have been tried. The motivation for introducing a dependence on rock domain was guided by the hydrogeological interpretation with the aim of honouring the observed differences in hydraulic properties measured at the boreholes

Regional hydrogeological simulations using CONECTFLOW. Preliminary site description. Laxemar sub area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Hartley, Lee; Hunter, Fiona; Jackson, Peter; McCarthy, Rachel [Serco Assurance, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden)

2006-04-15

The main objective of this study is to support the development of a preliminary Site Description of the Laxemar subarea on a regional-scale based on the available data of November 2004 (Data Freeze L1.2). A more specific objective of this study is to assess the role of both known and less quantified hydrogeological conditions in determining the present-day distribution of saline groundwater in the Laxemar subarea on a regional-scale. An improved understanding of the palaeo-hydrogeology is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. This is to serve as a basis for describing the present hydrogeological conditions on a local-scale, as well as predictions of future hydrogeological conditions. Another objective is to assess the flow-paths from the local-scale model domain, based on the present-day flow conditions, to assess the distribution of discharge and recharge areas connected to the flow at the approximate repository depth to inform the Preliminary Safety Evaluation. Significant new features incorporated in the modelling include: a depth variation in hydraulic properties within the deformation zones; a dependence on rock domain and depth in the rock mass properties in regional-scale models; a more detailed model of the overburden in terms of a layered system of spatially variable thickness made up of several different types of Quaternary deposits has been implemented; and several variants on the position of the watertable have been tried. The motivation for introducing a dependence on rock domain was guided by the hydrogeological interpretation with the aim of honouring the observed differences in hydraulic properties measured at the boreholes.

Coherent states and covariant semi-spectral measures

International Nuclear Information System (INIS)

Scutaru, H.

1976-01-01

The close connection between Mackey's theory of imprimitivity systems and the so called generalized coherent states introduced by Perelomov is established. Coherent states give a covariant description of the ''localization'' of a quantum system in the phase space in a similar way as the imprimitivity systems give a covariant description of the localization of a quantum system in the configuration space. The observation that for any system of coherent states one can define a covariant semi-spectral measure made possible a rigurous formulation of this idea. A generalization of the notion of coherent states is given. Covariant semi-spectral measures associated with systems of coherent states are defined and characterized. Necessary and sufficient conditions for a unitary representation of a Lie group to be i) a subrepresentation of an induced one and ii) a representation with coherent states are given (author)

A Qualitative Descriptive Analysis of Collaboration Technology in the Navy

Directory of Open Access Journals (Sweden)

Ryan Wark

2015-10-01

Full Text Available Collaboration technologies enable people to communicate and use information to make organizational decisions. The United States Navy refers to this concept as information dominance. Various collaboration technologies are used by the Navy to achieve this mission. This qualitative descriptive study objectively examined how a matrix oriented Navy activity perceived an implemented collaboration technology. These insights were used to determine whether a specific collaboration technology achieved a mission of information dominance. The study used six collaboration themes as a foundation to include: (a Cultural intelligence, (b Communication, (c Capability, (d Coordination, (e Cooperation, and (f Convergence. It was concluded that collaboration technology was mostly perceived well and helped to achieve some levels of information dominance. Collaboration technology improvement areas included bringing greater awareness to the collaboration technology, revamping the look and feel of the user interface, centrally paying for user and storage fees, incorporating more process management tools, strategically considering a Continuity of Operations, and incorporating additional industry best practices for data structures. Emerging themes of collaboration were collected to examine common patterns identified in the collected data. Emerging themes included acceptance, awareness, search, scope, content, value, tools, system performance, implementation, training, support, usage, structure, complexity, approach, governance/configuration management/policy, and resourcing.

The radar signature of revolution objects in scientific computing

International Nuclear Information System (INIS)

Bonnemason, P.; Le Martret, R.; Scheurer, B.; Stupfel, B.

1990-12-01

This work is motivated by the study of stealthy (or discrete) revolution objects vis-a-vis a radar. Efficient algorithms, specific numerical methods and two original industrial software (SHF 89 and SHF C) have been developed. These are reliable tools in intensive scientific computing. In particular, they have enabled the precise numerical modeling of complex objects, of very general forms, in the field of high frequencies and a thorough understanding of the physics of the problems involved. The purpose of this note is a general description of the work and its context, which is illustrated by examples of numerical applications (presented in Appendix 4). The technical aspects are detailed in reports and publications (a list is attached to this note) [fr

Investigating an outbreak of acute fever in Chuuk, Federated States of Micronesia

Directory of Open Access Journals (Sweden)

Damian Hoy

2014-11-01

Full Text Available Objective: In September 2012, there was an unexpected increase of acute febrile illness (AFI in Chuuk State of the Federated States of Micronesia. At the same time, dengue outbreaks were occurring in two of the Federated States of Micronesia’s other three states. The cause of AFI was suspected to be dengue; however, by the end of October, only one of 39 samples was positive for dengue. The objective of the investigation was to establish the cause of the outbreak. Methods: A line list was created and data analysed by time, place, person and clinical features. Reported symptoms were compared with the published symptoms of several diagnoses and laboratory testing undertaken. Results: Of the 168 suspected cases, 62% were less than 20 years of age and 60% were male. The clinical features of the cases were not typical for dengue but suggestive of respiratory illness. Nasopharyngeal swabs were subsequently collected and found to be positive for influenza. Public health measures were undertaken and the AFI returned to expected levels. Discussion: Clinical diagnosis of acute febrile illness (AFI can often be difficult and misleading. This can mean that opportunities for preventive measures early on in an outbreak are missed. In any outbreak, descriptive epidemiological analyses are valuable in helping to ascertain the cause of the outbreak.

OGC Geographic Information Service Deductive Semantic Reasoning Based on Description Vocabularies Reduction

Directory of Open Access Journals (Sweden)

MIAO Lizhi

2015-09-01

Full Text Available As geographic information interoperability and sharing developing, more and more interoperable OGC (open geospatial consortium Web services (OWS are generated and published through the internet. These services can facilitate the integration of different scientific applications by searching, finding, and utilizing the large number of scientific data and Web services. However, these services are widely dispersed and hard to be found and utilized with executive semantic retrieval. This is especially true when considering the weak semantic description of geographic information service data. Focusing on semantic retrieval and reasoning of the distributed OWS resources, a deductive and semantic reasoning method is proposed to describe and search relevant OWS resources. Specifically, ①description words are extracted from OWS metadata file to generate GISe ontology-database and instance-database based on geographic ontology according to basic geographic elements category, ②a description words reduction model is put forward to implement knowledge reduction on GISe instance-database based on rough set theory and generate optimized instances database, ③utilizing GISe ontology-database and optimized instance-database to implement semantic inference and reasoning of geographic searching objects is used as an example to demonstrate the efficiency, feasibility and recall ration of the proposed description-word-based reduction model.

Microscopic description of inelastic proton scattering from 88Sr

International Nuclear Information System (INIS)

Kouw, L.R.

1987-01-01

A microscopic description of the 88 Sr(p,p') reaction at 25 and 31 MeV, 200 MeV and 65 MeV is given. In the analysis several excited states are considered. For the nuclear structure of these states wave functions calculated from a one broken-pair model in a 4hw model space are used which give in general a good description of the shape of the transition charge and current densities as measured in (e,e') scattering. Also a macroscopic analysis has been made of some collective transitions. For 24, 31 and 65 MeV the effective HJ and the JLM interaction were employed, the effective Paris interaction was used at 200 MeV and the M3YP interaction at 65 MeV. At 65 and 200 MeV some calibration factors were needed. It is shown that the nonlocality of the distortion potential is closely related to the nonlocality of the transition potential. The influence of a spin-orbit potential and nonlocality in the single-particle potential on the electromagnetic current operator is discussed. In an impulse approximation of the electromagnetic coupling the presence of these terms would lead to violation of charge conservation. Starting from a Lagrangian formulation a current operator is derived that conserves explicitly electric charge. (Auth.)

Integration of the Gene Ontology into an object-oriented architecture

Directory of Open Access Journals (Sweden)