WorldWideScience

Sample records for numerous family based

  1. Finger-Based Numerical Skills Link Fine Motor Skills to Numerical Development in Preschoolers.

    Science.gov (United States)

    Suggate, Sebastian; Stoeger, Heidrun; Fischer, Ursula

    2017-12-01

    Previous studies investigating the association between fine-motor skills (FMS) and mathematical skills have lacked specificity. In this study, we test whether an FMS link to numerical skills is due to the involvement of finger representations in early mathematics. We gave 81 pre-schoolers (mean age of 4 years, 9 months) a set of FMS measures and numerical tasks with and without a specific finger focus. Additionally, we used receptive vocabulary and chronological age as control measures. FMS linked more closely to finger-based than to nonfinger-based numerical skills even after accounting for the control variables. Moreover, the relationship between FMS and numerical skill was entirely mediated by finger-based numerical skills. We concluded that FMS are closely related to early numerical skill development through finger-based numerical counting that aids the acquisition of mathematical mental representations.

  2. SMD-based numerical stochastic perturbation theory

    Energy Technology Data Exchange (ETDEWEB)

    Dalla Brida, Mattia [Universita di Milano-Bicocca, Dipartimento di Fisica, Milan (Italy); INFN, Sezione di Milano-Bicocca (Italy); Luescher, Martin [CERN, Theoretical Physics Department, Geneva (Switzerland); AEC, Institute for Theoretical Physics, University of Bern (Switzerland)

    2017-05-15

    The viability of a variant of numerical stochastic perturbation theory, where the Langevin equation is replaced by the SMD algorithm, is examined. In particular, the convergence of the process to a unique stationary state is rigorously established and the use of higher-order symplectic integration schemes is shown to be highly profitable in this context. For illustration, the gradient-flow coupling in finite volume with Schroedinger functional boundary conditions is computed to two-loop (i.e. NNL) order in the SU(3) gauge theory. The scaling behaviour of the algorithm turns out to be rather favourable in this case, which allows the computations to be driven close to the continuum limit. (orig.)

  3. SMD-based numerical stochastic perturbation theory

    International Nuclear Information System (INIS)

    Dalla Brida, Mattia; Luescher, Martin

    2017-01-01

    The viability of a variant of numerical stochastic perturbation theory, where the Langevin equation is replaced by the SMD algorithm, is examined. In particular, the convergence of the process to a unique stationary state is rigorously established and the use of higher-order symplectic integration schemes is shown to be highly profitable in this context. For illustration, the gradient-flow coupling in finite volume with Schroedinger functional boundary conditions is computed to two-loop (i.e. NNL) order in the SU(3) gauge theory. The scaling behaviour of the algorithm turns out to be rather favourable in this case, which allows the computations to be driven close to the continuum limit. (orig.)

  4. SMD-based numerical stochastic perturbation theory

    Science.gov (United States)

    Dalla Brida, Mattia; Lüscher, Martin

    2017-05-01

    The viability of a variant of numerical stochastic perturbation theory, where the Langevin equation is replaced by the SMD algorithm, is examined. In particular, the convergence of the process to a unique stationary state is rigorously established and the use of higher-order symplectic integration schemes is shown to be highly profitable in this context. For illustration, the gradient-flow coupling in finite volume with Schrödinger functional boundary conditions is computed to two-loop (i.e. NNL) order in the SU(3) gauge theory. The scaling behaviour of the algorithm turns out to be rather favourable in this case, which allows the computations to be driven close to the continuum limit.

  5. Numerical continuation of families of heteroclinic connections between periodic orbits in a Hamiltonian system

    Science.gov (United States)

    Barrabés, E.; Mondelo, J. M.; Ollé, M.

    2013-10-01

    This paper is devoted to the numerical computation and continuation of families of heteroclinic connections between hyperbolic periodic orbits (POs) of a Hamiltonian system. We describe a method that requires the numerical continuation of a nonlinear system that involves the initial conditions of the two POs, the linear approximations of the corresponding manifolds and a point in a given Poincaré section where the unstable and stable manifolds match. The method is applied to compute families of heteroclinic orbits between planar Lyapunov POs around the collinear equilibrium points of the restricted three-body problem in different scenarios. In one of them, for the Sun-Jupiter mass parameter, we provide energy ranges for which the transition between different resonances is possible.

  6. Numerical simulations of a family of the coupled viscous Burgers, equation using the lattice Boltzmann method

    International Nuclear Information System (INIS)

    He, Y B; Tang, X H

    2016-01-01

    In this paper, in order to extend the lattice Boltzmann method (LBM) to deal with more nonlinear systems, a one-dimensional and five-velocity lattice Boltzmann scheme with an amending function for a family of the coupled viscous Burgers’ equation (CVBE) is proposed. With the Taylor and Chapman–Enskog expansion, a family of the CVBE is recovered correctly from the lattice Boltzmann equation through selecting the equilibrium distribution functions and amending functions properly. The method is applied to some test examples with an analytical solution. The results are compared with those obtained by the finite difference method (FDM); it is shown that the numerical solutions agree well with the analytical solutions and the errors obtained by the present method are smaller than the FDM. Furthermore, some problems without analytical solutions are numerically studied by the present method and the FDM. The results show that the numerical solutions of the LBM are in good agreement with those obtained by the FDM, which can validate the effectiveness and stability of the LBM. (paper: classical statistical mechanics, equilibrium and non-equilibrium)

  7. Developing product families based on architectures

    DEFF Research Database (Denmark)

    Harlou, Ulf

    2006-01-01

    family master plan (PFMP). The PFMP aims at modelling product families and especially variety of product families. The results of this thesis build on research literature and experiences from the industrial partners. Extensive verifications of the theory contributions, models and tools have been carried......The subject of this PhD thesis is development of product families based on architectures. Companies are introducing more and more product variants to fulfil the market demands. These new variants add complexity to many of the processes and systems in the companies. Reuse of standard designs (i.......e. design entities) and re-use of the way new products are developed can simplify the processes and systems. Case studies show that reuse can lead to reduction of cost and time-to-market of new products. One of the means for managing reuse of standard designs within product families are architectures...

  8. A Numerical Study of Quantization-Based Integrators

    Directory of Open Access Journals (Sweden)

    Barros Fernando

    2014-01-01

    Full Text Available Adaptive step size solvers are nowadays considered fundamental to achieve efficient ODE integration. While, traditionally, ODE solvers have been designed based on discrete time machines, new approaches based on discrete event systems have been proposed. Quantization provides an efficient integration technique based on signal threshold crossing, leading to independent and modular solvers communicating through discrete events. These solvers can benefit from the large body of knowledge on discrete event simulation techniques, like parallelization, to obtain efficient numerical integration. In this paper we introduce new solvers based on quantization and adaptive sampling techniques. Preliminary numerical results comparing these solvers are presented.

  9. Numerical

    Directory of Open Access Journals (Sweden)

    M. Boumaza

    2015-07-01

    Full Text Available Transient convection heat transfer is of fundamental interest in many industrial and environmental situations, as well as in electronic devices and security of energy systems. Transient fluid flow problems are among the more difficult to analyze and yet are very often encountered in modern day technology. The main objective of this research project is to carry out a theoretical and numerical analysis of transient convective heat transfer in vertical flows, when the thermal field is due to different kinds of variation, in time and space of some boundary conditions, such as wall temperature or wall heat flux. This is achieved by the development of a mathematical model and its resolution by suitable numerical methods, as well as performing various sensitivity analyses. These objectives are achieved through a theoretical investigation of the effects of wall and fluid axial conduction, physical properties and heat capacity of the pipe wall on the transient downward mixed convection in a circular duct experiencing a sudden change in the applied heat flux on the outside surface of a central zone.

  10. Comparison of GPU-Based Numerous Particles Simulation and Experiment

    International Nuclear Information System (INIS)

    Park, Sang Wook; Jun, Chul Woong; Sohn, Jeong Hyun; Lee, Jae Wook

    2014-01-01

    The dynamic behavior of numerous grains interacting with each other can be easily observed. In this study, this dynamic behavior was analyzed based on the contact between numerous grains. The discrete element method was used for analyzing the dynamic behavior of each particle and the neighboring-cell algorithm was employed for detecting their contact. The Hertzian and tangential sliding friction contact models were used for calculating the contact force acting between the particles. A GPU-based parallel program was developed for conducting the computer simulation and calculating the numerous contacts. The dam break experiment was performed to verify the simulation results. The reliability of the program was verified by comparing the results of the simulation with those of the experiment

  11. Numerical analysis of a polysilicon-based resistive memory device

    KAUST Repository

    Berco, Dan; Chand, Umesh

    2018-01-01

    This study investigates a conductive bridge resistive memory device based on a Cu top electrode, 10-nm polysilicon resistive switching layer and a TiN bottom electrode, by numerical analysis for $$10^{3}$$103 programming and erase simulation cycles

  12. Family based dispatching with batch availability

    NARCIS (Netherlands)

    van der Zee, D.J.

    2013-01-01

    Family based dispatching rules seek to lower set-up frequencies by grouping (batching) similar types of jobs for joint processing. Hence shop flow times may be improved, as less time is spent on set-ups. Motivated by an industrial project we study the control of machines with batch availability,

  13. Treating Emotionally Disturbed Youth: Home-Based Family Focused Intervention.

    Science.gov (United States)

    Anders-Cibik, Pamela; And Others

    Home-based intervention services for emotionally disturbed youth are also commonly known as in-home services, family-centered services, family-based services, intensive family services, or family preservation services. They have developed as a way to deal with serious family problems that often result in the removal of a child or adolescent from…

  14. Where are family theories in family-based obesity treatment?: conceptualizing the study of families in pediatric weight management

    Science.gov (United States)

    Skelton, JA; Buehler, C; Irby, MB; Grzywacz, JG

    2014-01-01

    Family-based approaches to pediatric obesity treatment are considered the ‘gold-standard,’ and are recommended for facilitating behavior change to improve child weight status and health. If family-based approaches are to be truly rooted in the family, clinicians and researchers must consider family process and function in designing effective interventions. To bring a better understanding of family complexities to family-based treatment, two relevant reviews were conducted and are presented: (1) a review of prominent and established theories of the family that may provide a more comprehensive and in-depth approach for addressing pediatric obesity; and (2) a systematic review of the literature to identify the use of prominent family theories in pediatric obesity research, which found little use of theories in intervention studies. Overlapping concepts across theories include: families are a system, with interdependence of units; the idea that families are goal-directed and seek balance; and the physical and social environment imposes demands on families. Family-focused theories provide valuable insight into the complexities of families. Increased use of these theories in both research and practice may identify key leverage points in family process and function to prevent the development of or more effectively treat obesity. The field of family studies provides an innovative approach to the difficult problem of pediatric obesity, building on the long-established approach of family-based treatment. PMID:22531090

  15. Numeral eddy current sensor modelling based on genetic neural network

    International Nuclear Information System (INIS)

    Yu Along

    2008-01-01

    This paper presents a method used to the numeral eddy current sensor modelling based on the genetic neural network to settle its nonlinear problem. The principle and algorithms of genetic neural network are introduced. In this method, the nonlinear model parameters of the numeral eddy current sensor are optimized by genetic neural network (GNN) according to measurement data. So the method remains both the global searching ability of genetic algorithm and the good local searching ability of neural network. The nonlinear model has the advantages of strong robustness, on-line modelling and high precision. The maximum nonlinearity error can be reduced to 0.037% by using GNN. However, the maximum nonlinearity error is 0.075% using the least square method

  16. Numerical solution of modified differential equations based on symmetry preservation.

    Science.gov (United States)

    Ozbenli, Ersin; Vedula, Prakash

    2017-12-01

    In this paper, we propose a method to construct invariant finite-difference schemes for solution of partial differential equations (PDEs) via consideration of modified forms of the underlying PDEs. The invariant schemes, which preserve Lie symmetries, are obtained based on the method of equivariant moving frames. While it is often difficult to construct invariant numerical schemes for PDEs due to complicated symmetry groups associated with cumbersome discrete variable transformations, we note that symmetries associated with more convenient transformations can often be obtained by appropriately modifying the original PDEs. In some cases, modifications to the original PDEs are also found to be useful in order to avoid trivial solutions that might arise from particular selections of moving frames. In our proposed method, modified forms of PDEs can be obtained either by addition of perturbation terms to the original PDEs or through defect correction procedures. These additional terms, whose primary purpose is to enable symmetries with more convenient transformations, are then removed from the system by considering moving frames for which these specific terms go to zero. Further, we explore selection of appropriate moving frames that result in improvement in accuracy of invariant numerical schemes based on modified PDEs. The proposed method is tested using the linear advection equation (in one- and two-dimensions) and the inviscid Burgers' equation. Results obtained for these tests cases indicate that numerical schemes derived from the proposed method perform significantly better than existing schemes not only by virtue of improvement in numerical accuracy but also due to preservation of qualitative properties or symmetries of the underlying differential equations.

  17. Implementing Families of Implicit Chebyshev Methods with Exact Coefficients for the Numerical Integration of First- and Second-Order Differential Equations

    National Research Council Canada - National Science Library

    Mitchell, Jason

    2002-01-01

    A method is presented for the generation of exact numerical coefficients found in two families of implicit Chebyshev methods for the numerical integration of first- and second-order ordinary differential equations...

  18. Likelihood-Based Inference of B Cell Clonal Families.

    Directory of Open Access Journals (Sweden)

    Duncan K Ralph

    2016-10-01

    Full Text Available The human immune system depends on a highly diverse collection of antibody-making B cells. B cell receptor sequence diversity is generated by a random recombination process called "rearrangement" forming progenitor B cells, then a Darwinian process of lineage diversification and selection called "affinity maturation." The resulting receptors can be sequenced in high throughput for research and diagnostics. Such a collection of sequences contains a mixture of various lineages, each of which may be quite numerous, or may consist of only a single member. As a step to understanding the process and result of this diversification, one may wish to reconstruct lineage membership, i.e. to cluster sampled sequences according to which came from the same rearrangement events. We call this clustering problem "clonal family inference." In this paper we describe and validate a likelihood-based framework for clonal family inference based on a multi-hidden Markov Model (multi-HMM framework for B cell receptor sequences. We describe an agglomerative algorithm to find a maximum likelihood clustering, two approximate algorithms with various trade-offs of speed versus accuracy, and a third, fast algorithm for finding specific lineages. We show that under simulation these algorithms greatly improve upon existing clonal family inference methods, and that they also give significantly different clusters than previous methods when applied to two real data sets.

  19. GPU based numerical simulation of core shooting process

    Directory of Open Access Journals (Sweden)

    Yi-zhong Zhang

    2017-11-01

    Full Text Available Core shooting process is the most widely used technique to make sand cores and it plays an important role in the quality of sand cores. Although numerical simulation can hopefully optimize the core shooting process, research on numerical simulation of the core shooting process is very limited. Based on a two-fluid model (TFM and a kinetic-friction constitutive correlation, a program for 3D numerical simulation of the core shooting process has been developed and achieved good agreements with in-situ experiments. To match the needs of engineering applications, a graphics processing unit (GPU has also been used to improve the calculation efficiency. The parallel algorithm based on the Compute Unified Device Architecture (CUDA platform can significantly decrease computing time by multi-threaded GPU. In this work, the program accelerated by CUDA parallelization method was developed and the accuracy of the calculations was ensured by comparing with in-situ experimental results photographed by a high-speed camera. The design and optimization of the parallel algorithm were discussed. The simulation result of a sand core test-piece indicated the improvement of the calculation efficiency by GPU. The developed program has also been validated by in-situ experiments with a transparent core-box, a high-speed camera, and a pressure measuring system. The computing time of the parallel program was reduced by nearly 95% while the simulation result was still quite consistent with experimental data. The GPU parallelization method can successfully solve the problem of low computational efficiency of the 3D sand shooting simulation program, and thus the developed GPU program is appropriate for engineering applications.

  20. Numerical analysis of a polysilicon-based resistive memory device

    KAUST Repository

    Berco, Dan

    2018-03-08

    This study investigates a conductive bridge resistive memory device based on a Cu top electrode, 10-nm polysilicon resistive switching layer and a TiN bottom electrode, by numerical analysis for $$10^{3}$$103 programming and erase simulation cycles. The low and high resistive state values in each cycle are calculated, and the analysis shows that the structure has excellent retention reliability properties. The presented Cu species density plot indicates that Cu insertion occurs almost exclusively along grain boundaries resulting in a confined isomorphic conductive filament that maintains its overall shape and electric properties during cycling. The superior reliability of this structure may thus be attributed to the relatively low amount of Cu migrating into the RSL during initial formation. In addition, the results show a good match and help to confirm experimental measurements done over a previously demonstrated device.

  1. Numerical Model based Reliability Estimation of Selective Laser Melting Process

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2014-01-01

    Selective laser melting is developing into a standard manufacturing technology with applications in various sectors. However, the process is still far from being at par with conventional processes such as welding and casting, the primary reason of which is the unreliability of the process. While...... of the selective laser melting process. A validated 3D finite-volume alternating-direction-implicit numerical technique is used to model the selective laser melting process, and is calibrated against results from single track formation experiments. Correlation coefficients are determined for process input...... parameters such as laser power, speed, beam profile, etc. Subsequently, uncertainties in the processing parameters are utilized to predict a range for the various outputs, using a Monte Carlo method based uncertainty analysis methodology, and the reliability of the process is established....

  2. Operational Numerical Weather Prediction systems based on Linux cluster architectures

    International Nuclear Information System (INIS)

    Pasqui, M.; Baldi, M.; Gozzini, B.; Maracchi, G.; Giuliani, G.; Montagnani, S.

    2005-01-01

    The progress in weather forecast and atmospheric science has been always closely linked to the improvement of computing technology. In order to have more accurate weather forecasts and climate predictions, more powerful computing resources are needed, in addition to more complex and better-performing numerical models. To overcome such a large computing request, powerful workstations or massive parallel systems have been used. In the last few years, parallel architectures, based on the Linux operating system, have been introduced and became popular, representing real high performance-low cost systems. In this work the Linux cluster experience achieved at the Laboratory far Meteorology and Environmental Analysis (LaMMA-CNR-IBIMET) is described and tips and performances analysed

  3. A Family of Symmetric Linear Multistep Methods for the Numerical Solution of the Schroedinger Equation and Related Problems

    International Nuclear Information System (INIS)

    Anastassi, Z. A.; Simos, T. E.

    2010-01-01

    We develop a new family of explicit symmetric linear multistep methods for the efficient numerical solution of the Schroedinger equation and related problems with oscillatory solution. The new methods are trigonometrically fitted and have improved intervals of periodicity as compared to the corresponding classical method with constant coefficients and other methods from the literature. We also apply the methods along with other known methods to real periodic problems, in order to measure their efficiency.

  4. Teaching evidence based medicine in family medicine

    Directory of Open Access Journals (Sweden)

    Davorka Vrdoljak

    2012-05-01

    Full Text Available The concept of evidence based medicine (EBM as the integrationof clinical expertise, patient values and the best evidence was introduced by David Sackett in the 1980’s. Scientific literature in medicine is often marked by expansion, acummulation and quick expiration. Reading all important articles to keep in touch with relevant information is impossible. Finding the best evidence that answers a clinical question in general practice (GP in a short time is not easy. Five useful steps are described –represented by the acronym “5A+E”: assess, ask, acquire, appraise, apply and evaluate.The habit of conducting an evidence search “on the spot’’ is proposed. Although students of medicine at University of Split School of Medicine are taught EBM from the first day of their study and in all courses, their experience of evidence-searching and critical appraisal of the evidence, in real time with real patient is inadequate. Teaching the final-year students the practical use of EBM in a GP’s office is different and can have an important role in their professional development. It can positively impact on quality of their future work in family practice (or some other medical specialty by acquiring this habit of constant evidence-checking to ensure that best practice becomes a mechanism for life-long learning. Conclusion. EBM is a foundation stone of every branch of medicine and important part of Family Medicine as scientific and professional discipline. To have an EB answer resulting from GP’s everyday work is becoming a part of everyday practice.

  5. Numerical determination of families of three-dimensional double-symmetric periodic orbits in the restricted three-body problem. Pt. 1

    International Nuclear Information System (INIS)

    Kazantzis, P.G.

    1979-01-01

    New families of three-dimensional double-symmetric periodic orbits are determined numerically in the Sun-Jupiter case of the restricted three-body problem. These families bifurcate from the 'vertical-critical' orbits (αsub(ν) = -1, csub(ν) = 0) of the 'basic' plane families i. g 1 g 2 h, a, m and I. Further the numerical procedure employed in the determination of these families has been described and interesting results have been pointed out. Also, computer plots of the orbits of these families have been shown in conical projections. (orig.)

  6. Family Involvement in School-Based Dysphagia Management

    Science.gov (United States)

    Angell, Maureen E.; Bailey, Rita L.; Nicholson, Joanna K.; Stoner, Julia B.

    2009-01-01

    This article provides a practitioner-friendly synthesis of existing literature on family involvement in the management of dysphagia for school-age. Research reviewed includes family perspectives on programs, therapists, and characteristics that comprise effective family involvement in school-based dysphagia management programs. Also included are…

  7. A textbook of computer based numerical and statistical techniques

    CERN Document Server

    Jaiswal, AK

    2009-01-01

    About the Book: Application of Numerical Analysis has become an integral part of the life of all the modern engineers and scientists. The contents of this book covers both the introductory topics and the more advanced topics such as partial differential equations. This book is different from many other books in a number of ways. Salient Features: Mathematical derivation of each method is given to build the students understanding of numerical analysis. A variety of solved examples are given. Computer programs for almost all numerical methods discussed have been presented in `C` langu

  8. A NUMERICAL STUDY OF UNIVERSALITY AND SELF-SIMILARITY IN SOME FAMILIES OF FORCED LOGISTIC MAPS

    NARCIS (Netherlands)

    Rabassa, Pau; Jorba, Angel; Carles Tatjer, Joan

    We explore different two-parametric families of quasi-periodically Forced Logistic Maps looking for universality and self-similarity properties. In the bifurcation diagram of the one-dimensional Logistic Map, it is well known that there exist parameter values s(n) where the 2(n)-periodic orbit is

  9. Fully Numerical Methods for Continuing Families of Quasi-Periodic Invariant Tori in Astrodynamics

    Science.gov (United States)

    Baresi, Nicola; Olikara, Zubin P.; Scheeres, Daniel J.

    2018-01-01

    Quasi-periodic invariant tori are of great interest in astrodynamics because of their capability to further expand the design space of satellite missions. However, there is no general consent on what is the best methodology for computing these dynamical structures. This paper compares the performance of four different approaches available in the literature. The first two methods compute invariant tori of flows by solving a system of partial differential equations via either central differences or Fourier techniques. In contrast, the other two strategies calculate invariant curves of maps via shooting algorithms: one using surfaces of section, and one using a stroboscopic map. All of the numerical procedures are tested in the co-rotating frame of the Earth as well as in the planar circular restricted three-body problem. The results of our numerical simulations show which of the reviewed procedures should be preferred for future studies of astrodynamics systems.

  10. A Method of Numerical Control Equipment Appearance Design Based on Product Identity

    Science.gov (United States)

    Zhu, Zhijuan; Zhou, Qi; Li, Bin; Visser, Steve

    Research on numerical control (NC) equipment has been more and more abundant; however, there are few existing studies in the field of appearance design for NC equipments. This paper provided a method to generate new appearance design of NC equipments based on product identity (PI). For the purpose of providing guidelines to generate new concept of NC equipment design, this paper, therefore, took the DMG Company (a Germen NC equipment company) as a case, examined the total products of this company from two aspects: Product Image and Product Family. Task 1 was an evaluate task about the Product Image by using the semantic differential (SD) evaluation method; Task 2 was a study task about Product Family to find out features of the products and classify these features. During the Task 2, several features have been found out and summarized, and these features were classified into 3 different levels according to their frequency and importance. In the end, two appearance design samples have been generated based on the analysis above to prove the application of the research.

  11. Using the noninformative families in family-based association tests : A powerful new testing strategy

    NARCIS (Netherlands)

    Lange, C; DeMeo, D; Silverman, EK; Weiss, ST; Laird, NM

    2003-01-01

    For genetic association studies with multiple phenotypes, we propose a new strategy for multiple testing with family-based association tests (FBATs). The strategy increases the power by both using all available family data and reducing the number of hypotheses tested while being robust against

  12. Acculturation-Based and Everyday Family Conflict in Chinese American Families

    Science.gov (United States)

    Juang, Linda P.; Syed, Moin; Cookston, Jeffrey T.; Wang, Yijie; Kim, Su Yeong

    2012-01-01

    Everyday conflict (studied primarily among European American families) is viewed as an assertion of autonomy from parents that is normative during adolescence. Acculturation-based conflict (studied primarily among Asian- and Latino-heritage families) is viewed as a threat to relatedness with parents rather than the normative assertion of autonomy.…

  13. LED-based Photometric Stereo: Modeling, Calibration and Numerical Solutions

    DEFF Research Database (Denmark)

    Quéau, Yvain; Durix, Bastien; Wu, Tao

    2018-01-01

    We conduct a thorough study of photometric stereo under nearby point light source illumination, from modeling to numerical solution, through calibration. In the classical formulation of photometric stereo, the luminous fluxes are assumed to be directional, which is very difficult to achieve in pr...

  14. An Energy Based Numerical Approach to Phase Change Problems

    DEFF Research Database (Denmark)

    Hauggaard-Nielsen, Anders Boe; Damkilde, Lars; Krenk, Steen

    1996-01-01

    Phase change problems, occurring e.g. in melting, casting and freezing processes, are often characterized by a very narrow transition zone with very lareg changes in heat capacity and conductivity. This leads to problems in numerical procedures, where the transition zone propagates through a mesh...

  15. A family systems-based model of organizational intervention.

    Science.gov (United States)

    Shumway, Sterling T; Kimball, Thomas G; Korinek, Alan W; Arredondo, Rudy

    2007-04-01

    Employee assistance professionals are expected to be proficient at intervening in organizations and creating meaningful behavioral change in interpersonal functioning. Because of their training in family systems theories and concepts, marriage and family therapists (MFTs) are well suited to serve organizations as "systems consultants." Unfortunately, the authors were unable to identify any family systems-based models for organizational intervention that have been empirically tested and supported. In this article, the authors present a family systems-based model of intervention that they developed while working in an employee assistance program (EAP). They also present research that was used to refine the model and to provide initial support for its effectiveness.

  16. Theoretical frameworks informing family-based child and adolescent obesity interventions

    DEFF Research Database (Denmark)

    Alulis, Sarah; Grabowski, Dan

    2017-01-01

    into focus. However, the use of theoretical frameworks to strengthen these interventions is rare and very uneven. OBJECTIVE AND METHOD: To conduct a qualitative meta-synthesis of family-based interventions for child and adolescent obesity to identify the theoretical frameworks applied, thus understanding how...... inconsistencies and a significant void between research results and health care practice. Based on the analysis, this article proposes three themes to be used as focus points when designing future interventions and when selecting theories for the development of solid, theory-based frameworks for application...... cognitive, self-efficacy and Family Systems Theory appeared most frequently. The remaining 24 were classified as theory-related as theoretical elements of self-monitoring; stimulus control, reinforcement and modelling were used. CONCLUSION: The designs of family-based interventions reveal numerous...

  17. Numerical Relativity for Space-Based Gravitational Wave Astronomy

    Science.gov (United States)

    Baker, John G.

    2011-01-01

    In the next decade, gravitational wave instruments in space may provide high-precision measurements of gravitational-wave signals from strong sources, such as black holes. Currently variations on the original Laser Interferometer Space Antenna mission concepts are under study in the hope of reducing costs. Even the observations of a reduced instrument may place strong demands on numerical relativity capabilities. Possible advances in the coming years may fuel a new generation of codes ready to confront these challenges.

  18. Analysis of control rod behavior based on numerical simulation

    International Nuclear Information System (INIS)

    Ha, D. G.; Park, J. K.; Park, N. G.; Suh, J. M.; Jeon, K. L.

    2010-01-01

    The main function of a control rod is to control core reactivity change during operation associated with changes in power, coolant temperature, and dissolved boron concentration by the insertion and withdrawal of control rods from the fuel assemblies. In a scram, the control rod assemblies are released from the CRDMs (Control Rod Drive Mechanisms) and, due to gravity, drop rapidly into the fuel assemblies. The control rod insertion time during a scram must be within the time limits established by the overall core safety analysis. To assure the control rod operational functions, the guide thimbles shall not obstruct the insertion and withdrawal of the control rods or cause any damage to the fuel assembly. When fuel assembly bow occurs, it can affect both the operating performance and the core safety. In this study, the drag forces of the control rod are estimated by a numerical simulation to evaluate the guide tube bow effect on control rod withdrawal. The contact condition effects are also considered. A full scale 3D model is developed for the evaluation, and ANSYS - commercial numerical analysis code - is used for this numerical simulation. (authors)

  19. Validation of a numerical algorithm based on transformed equations

    International Nuclear Information System (INIS)

    Xu, H.; Barron, R.M.; Zhang, C.

    2003-01-01

    Generally, a typical equation governing a physical process, such as fluid flow or heat transfer, has three types of terms that involve partial derivatives, namely, the transient term, the convective terms and the diffusion terms. The major difficulty in obtaining numerical solutions of these partial differential equations is the discretization of the convective terms. The transient term is usually discretized using the first-order forward or backward differencing scheme. The diffusion terms are usually discretized using the central differencing scheme and no difficulty arises since these terms involve second-order spatial derivatives of the flow variables. The convective terms are non-linear and contain first-order spatial derivatives. The main difference between various numerical algorithms is the discretization of the convective terms. In the present study, an alternative approach to discretizing the governing equations is presented. In this algorithm, the governing equations are first transformed by introducing an exponential function to eliminate the convective terms in the equations. The proposed algorithm is applied to simulate some fluid flows with exact solutions to validate the proposed algorithm. The fluid flows used in this study are a self-designed quasi-fluid flow problem, stagnation in plane flow (Hiemenz flow), and flow between two concentric cylinders. The comparisons with the power-law scheme indicate that the proposed scheme exhibits better performance. (author)

  20. Introducing a new family of short-range potentials and their numerical solutions using the asymptotic iteration method

    Science.gov (United States)

    Assi, I. A.; Sous, A. J.

    2018-05-01

    The goal of this work is to derive a new class of short-range potentials that could have a wide range of physical applications, specially in molecular physics. The tridiagonal representation approach has been developed beyond its limitations to produce new potentials by requiring the representation of the Schrödinger wave operator to be multidiagonal and symmetric. This produces a family of Hulthén potentials that has a specific structure, as mentioned in the introduction. As an example, we have solved the nonrelativistic wave equation for the new four-parameter short-range screening potential numerically using the asymptotic iteration method, where we tabulated the eigenvalues for both s -wave and arbitrary l -wave cases in tables.

  1. CASTING IMPROVEMENT BASED ON METAHEURISTIC OPTIMIZATION AND NUMERICAL SIMULATION

    Directory of Open Access Journals (Sweden)

    Radomir Radiša

    2017-12-01

    Full Text Available This paper presents the use of metaheuristic optimization techniques to support the improvement of casting process. Genetic algorithm (GA, Ant Colony Optimization (ACO, Simulated annealing (SA and Particle Swarm Optimization (PSO have been considered as optimization tools to define the geometry of the casting part’s feeder. The proposed methodology has been demonstrated in the design of the feeder for casting Pelton turbine bucket. The results of the optimization are dimensional characteristics of the feeder, and the best result from all the implemented optimization processes has been adopted. Numerical simulation has been used to verify the validity of the presented design methodology and the feeding system optimization in the casting system of the Pelton turbine bucket.

  2. Does Students' Financial Behaviour Differ Based on Their Family Income?

    OpenAIRE

    Dorjana Nano; Teuta Llukani

    2015-01-01

    This study investigates the differences on Financial Behaviour among Albanian university students based on their family income. The main objectives of this study are: i) firstly, to assess the level of financial behaviour of Albanian university students; ii) to examine whether the financial behaviour differs based on the level of students family income; and ii) finally, , to provide some conclusions and policy implications with regard to financial behaviour. An instrument comprised of specifi...

  3. Family-based behavioural intervention for obese children.

    Science.gov (United States)

    Epstein, L H

    1996-02-01

    The family environment can contribute to the development of obesity. Parenting styles may influence the development of food preferences and the ability of a child to regulate intake. Parents and other family members arrange a common, shared environment that may be conducive to overeating or a sedentary lifestyle. Family members serve as models, and reinforce and support the acquisition and maintenance of eating and exercise behaviours. Family-based interventions are needed to modify these variables in treating obese children. We have made significant progress in developing interventions that target obese 8-12 year-old children, completing four 10-year follow-up studies that provide support for two factors that are useful in childhood obesity treatment. First, our research suggests that the direct involvement of at least one parent as an active participant in the weight loss process improves short- and long-term weight regulation. Second, our research suggests that increasing activity is important for maintenance of long-term weight control. Correlational analyses on the 10-year database suggest that family and friend support for behaviour change are related to long-term outcome. Family-based obesity treatment provides interventions for both children and their parents, but children benefit more from treatment than their parents. These positive results provide an encouraging basis for optimism that further development of interventions, based on newer research on family processes and behaviour changes, can be useful in treating childhood obesity.

  4. Evaluation of Gene-Based Family-Based Methods to Detect Novel Genes Associated With Familial Late Onset Alzheimer Disease

    Directory of Open Access Journals (Sweden)

    Maria V. Fernández

    2018-04-01

    Full Text Available Gene-based tests to study the combined effect of rare variants on a particular phenotype have been widely developed for case-control studies, but their evolution and adaptation for family-based studies, especially studies of complex incomplete families, has been slower. In this study, we have performed a practical examination of all the latest gene-based methods available for family-based study designs using both simulated and real datasets. We examined the performance of several collapsing, variance-component, and transmission disequilibrium tests across eight different software packages and 22 models utilizing a cohort of 285 families (N = 1,235 with late-onset Alzheimer disease (LOAD. After a thorough examination of each of these tests, we propose a methodological approach to identify, with high confidence, genes associated with the tested phenotype and we provide recommendations to select the best software and model for family-based gene-based analyses. Additionally, in our dataset, we identified PTK2B, a GWAS candidate gene for sporadic AD, along with six novel genes (CHRD, CLCN2, HDLBP, CPAMD8, NLRP9, and MAS1L as candidate genes for familial LOAD.

  5. Teaching numerical methods with IPython notebooks and inquiry-based learning

    KAUST Repository

    Ketcheson, David I.

    2014-01-01

    A course in numerical methods should teach both the mathematical theory of numerical analysis and the craft of implementing numerical algorithms. The IPython notebook provides a single medium in which mathematics, explanations, executable code, and visualizations can be combined, and with which the student can interact in order to learn both the theory and the craft of numerical methods. The use of notebooks also lends itself naturally to inquiry-based learning methods. I discuss the motivation and practice of teaching a course based on the use of IPython notebooks and inquiry-based learning, including some specific practical aspects. The discussion is based on my experience teaching a Masters-level course in numerical analysis at King Abdullah University of Science and Technology (KAUST), but is intended to be useful for those who teach at other levels or in industry.

  6. Numerical methods for characterization of synchrotron radiation based on the Wigner function method

    Directory of Open Access Journals (Sweden)

    Takashi Tanaka

    2014-06-01

    Full Text Available Numerical characterization of synchrotron radiation based on the Wigner function method is explored in order to accurately evaluate the light source performance. A number of numerical methods to compute the Wigner functions for typical synchrotron radiation sources such as bending magnets, undulators and wigglers, are presented, which significantly improve the computation efficiency and reduce the total computation time. As a practical example of the numerical characterization, optimization of betatron functions to maximize the brilliance of undulator radiation is discussed.

  7. A calculation method for RF couplers design based on numerical simulation by microwave studio

    International Nuclear Information System (INIS)

    Wang Rong; Pei Yuanji; Jin Kai

    2006-01-01

    A numerical simulation method for coupler design is proposed. It is based on the matching procedure for the 2π/3 structure given by Dr. R.L. Kyhl. Microwave Studio EigenMode Solver is used for such numerical simulation. the simulation for a coupler has been finished with this method and the simulation data are compared with experimental measurements. The results show that this numerical simulation method is feasible for coupler design. (authors)

  8. Numerical Experiments Based on the Catastrophe Model of Solar Eruptions

    Science.gov (United States)

    Xie, X. Y.; Ziegler, U.; Mei, Z. X.; Wu, N.; Lin, J.

    2017-11-01

    On the basis of the catastrophe model developed by Isenberg et al., we use the NIRVANA code to perform the magnetohydrodynamics (MHD) numerical experiments to look into various behaviors of the coronal magnetic configuration that includes a current-carrying flux rope used to model the prominence levitating in the corona. These behaviors include the evolution in equilibrium heights of the flux rope versus the change in the background magnetic field, the corresponding internal equilibrium of the flux rope, dynamic properties of the flux rope after the system loses equilibrium, as well as the impact of the referential radius on the equilibrium heights of the flux rope. In our calculations, an empirical model of the coronal density distribution given by Sittler & Guhathakurta is used, and the physical diffusion is included. Our experiments show that the deviation of simulations in the equilibrium heights from the theoretical results exists, but is not apparent, and the evolutionary features of the two results are similar. If the flux rope is initially locate at the stable branch of the theoretical equilibrium curve, the flux rope will quickly reach the equilibrium position in the simulation after several rounds of oscillations as a result of the self-adjustment of the system; and the flux rope lose the equilibrium if the initial location of the flux rope is set at the critical point on the theoretical equilibrium curve. Correspondingly, the internal equilibrium of the flux rope can be reached as well, and the deviation from the theoretical results is somewhat apparent since the approximation of the small radius of the flux rope is lifted in our experiments, but such deviation does not affect the global equilibrium in the system. The impact of the referential radius on the equilibrium heights of the flux rope is consistent with the prediction of the theory. Our calculations indicate that the motion of the flux rope after the loss of equilibrium is consistent with which

  9. Problem-Based Instructional Strategy and Numerical Ability as Determinants of Senior Secondary Achievement in Mathematics

    Science.gov (United States)

    Badru, Ademola K.

    2016-01-01

    The study investigated Problem-based Instructional Strategy and Numerical ability as determinants of Senior Secondary Achievement in Mathematics. This study used 4 x 2 x 2 non-randomised control group Pretest-Posttest Quasi-experimental Factorial design. It consisted of two independent variables (treatment and Numerical ability) and one moderating…

  10. A Numerical Matrix-Based method in Harmonic Studies in Wind Power Plants

    DEFF Research Database (Denmark)

    Dowlatabadi, Mohammadkazem Bakhshizadeh; Hjerrild, Jesper; Kocewiak, Łukasz Hubert

    2016-01-01

    In the low frequency range, there are some couplings between the positive- and negative-sequence small-signal impedances of the power converter due to the nonlinear and low bandwidth control loops such as the synchronization loop. In this paper, a new numerical method which also considers...... these couplings will be presented. The numerical data are advantageous to the parametric differential equations, because analysing the high order and complex transfer functions is very difficult, and finally one uses the numerical evaluation methods. This paper proposes a numerical matrix-based method, which...

  11. Defect-based graphene nanoribbon photodetectors: A numerical study

    Energy Technology Data Exchange (ETDEWEB)

    Zarei, M. H.; Sharifi, M. J., E-mail: m-j-sharifi@sbu.ac.ir [Department of Electrical Engineering, Shahid Beheshti University, Tehran 1983963113 (Iran, Islamic Republic of)

    2016-06-07

    Recently, some photodetectors based on graphene have been proposed. In all of these works, current generation was carried out by separation of photo-excited carriers using an electric field, either internal or external. In this work, a new method of producing current which is based on different transmission coefficients for electrons and holes when they travel toward any of the two contacts is proposed. To this end, a single Stone–Wales defect close to one of the two contacts was used to break the channel symmetry. In order to confirm the idea, the non-equilibrium Green's function formalism in real space in conjunction with the tight binding method was used in simulations. In addition, to clarify the results, we present a classical model in which different diffusion constants are assumed for the left going and the right going carriers. Additional simulations for different positions of the defect, different lengths of the ribbon, and different bias voltages were performed, and the results are included in this study.

  12. Energy-based numerical models for assessment of soil liquefaction

    Directory of Open Access Journals (Sweden)

    Amir Hossein Alavi

    2012-07-01

    Full Text Available This study presents promising variants of genetic programming (GP, namely linear genetic programming (LGP and multi expression programming (MEP to evaluate the liquefaction resistance of sandy soils. Generalized LGP and MEP-based relationships were developed between the strain energy density required to trigger liquefaction (capacity energy and the factors affecting the liquefaction characteristics of sands. The correlations were established based on well established and widely dispersed experimental results obtained from the literature. To verify the applicability of the derived models, they were employed to estimate the capacity energy values of parts of the test results that were not included in the analysis. The external validation of the models was verified using statistical criteria recommended by researchers. Sensitivity and parametric analyses were performed for further verification of the correlations. The results indicate that the proposed correlations are effectively capable of capturing the liquefaction resistance of a number of sandy soils. The developed correlations provide a significantly better prediction performance than the models found in the literature. Furthermore, the best LGP and MEP models perform superior than the optimal traditional GP model. The verification phases confirm the efficiency of the derived correlations for their general application to the assessment of the strain energy at the onset of liquefaction.

  13. Numerical Analysis of Modeling Based on Improved Elman Neural Network

    Directory of Open Access Journals (Sweden)

    Shao Jie

    2014-01-01

    Full Text Available A modeling based on the improved Elman neural network (IENN is proposed to analyze the nonlinear circuits with the memory effect. The hidden layer neurons are activated by a group of Chebyshev orthogonal basis functions instead of sigmoid functions in this model. The error curves of the sum of squared error (SSE varying with the number of hidden neurons and the iteration step are studied to determine the number of the hidden layer neurons. Simulation results of the half-bridge class-D power amplifier (CDPA with two-tone signal and broadband signals as input have shown that the proposed behavioral modeling can reconstruct the system of CDPAs accurately and depict the memory effect of CDPAs well. Compared with Volterra-Laguerre (VL model, Chebyshev neural network (CNN model, and basic Elman neural network (BENN model, the proposed model has better performance.

  14. Lifecycle-Based Swarm Optimization Method for Numerical Optimization

    Directory of Open Access Journals (Sweden)

    Hai Shen

    2014-01-01

    Full Text Available Bioinspired optimization algorithms have been widely used to solve various scientific and engineering problems. Inspired by biological lifecycle, this paper presents a novel optimization algorithm called lifecycle-based swarm optimization (LSO. Biological lifecycle includes four stages: birth, growth, reproduction, and death. With this process, even though individual organism died, the species will not perish. Furthermore, species will have stronger ability of adaptation to the environment and achieve perfect evolution. LSO simulates Biological lifecycle process through six optimization operators: chemotactic, assimilation, transposition, crossover, selection, and mutation. In addition, the spatial distribution of initialization population meets clumped distribution. Experiments were conducted on unconstrained benchmark optimization problems and mechanical design optimization problems. Unconstrained benchmark problems include both unimodal and multimodal cases the demonstration of the optimal performance and stability, and the mechanical design problem was tested for algorithm practicability. The results demonstrate remarkable performance of the LSO algorithm on all chosen benchmark functions when compared to several successful optimization techniques.

  15. Brief Family Based Intervention for Substance Abusing Adolescents

    Science.gov (United States)

    Hernandez, Lynn; Rodriguez, Ana Maria; Spirito, Anthony

    2015-01-01

    Synopsis Research has consistently shown that a lack of parental involvement in the activities of their children predicts initiation and escalation of substance use. Parental monitoring, as well as youth disclosure about their whereabouts, parent child communication, positive parenting and family management strategies, e.g., consistent limit setting, and parental communication about and disapproval of substance use, have all been shown to protect against adolescent substance abuse and substance problems. Given the empirical evidence, family and parenting approaches to preventing and intervening on adolescent substance misuse have received support in the literature. This article discusses the theoretical foundations as well as the application of the Family Check-up, a brief family-based intervention for adolescent substance use. PMID:26092741

  16. Hindi Numerals.

    Science.gov (United States)

    Bright, William

    In most languages encountered by linguists, the numerals, considered as a paradigmatic set, constitute a morpho-syntactic problem of only moderate complexity. The Indo-Aryan language family of North India, however, presents a curious contrast. The relatively regular numeral system of Sanskrit, as it has developed historically into the modern…

  17. Engaging families in physical activity research: a family-based focus group study.

    Science.gov (United States)

    Brown, Helen Elizabeth; Schiff, Annie; van Sluijs, Esther M F

    2015-11-25

    Family-based interventions present a much-needed opportunity to increase children's physical activity levels. However, little is known about how best to engage parents and their children in physical activity research. This study aimed to engage with the whole family to understand how best to recruit for, and retain participation in, physical activity research. Families (including a 'target' child aged between 8 and 11 years, their parents, siblings, and others) were recruited through schools and community groups. Focus groups were conducted using a semi-structured approach (informed by a pilot session). Families were asked to order cards listing the possible benefits of, and the barriers to, being involved in physical activity research and other health promotion activities, highlighting the items they consider most relevant, and suggesting additional items. Duplicate content analysis was used to identify transcript themes and develop a coding frame. Eighty-two participants from 17 families participated, including 17 'target' children (mean age 9.3 ± 1.1 years, 61.1% female), 32 other children and 33 adults (including parents, grandparents, and older siblings). Social, health and educational benefits were cited as being key incentives for involvement in physical activity research, with emphasis on children experiencing new things, developing character, and increasing social contact (particularly for shy children). Children's enjoyment was also given priority. The provision of child care or financial reward was not considered sufficiently appealing. Increased time commitment or scheduling difficulties were quoted as the most pertinent barriers to involvement (especially for families with several children), but parents commented these could be overcome if the potential value for children was clear. Lessons learned from this work may contribute to the development of effective recruitment and retention strategies for children and their families. Making the wide

  18. Family-based hip-hop to health: outcome results.

    Science.gov (United States)

    Fitzgibbon, Marian L; Stolley, Melinda R; Schiffer, Linda; Kong, Angela; Braunschweig, Carol L; Gomez-Perez, Sandra L; Odoms-Young, Angela; Van Horn, Linda; Christoffel, Katherine Kaufer; Dyer, Alan R

    2013-02-01

    This pilot study tested the feasibility of Family-Based Hip-Hop to Health, a school-based obesity prevention intervention for 3-5-year-old Latino children and their parents, and estimated its effectiveness in producing smaller average changes in BMI at 1-year follow-up. Four Head Start preschools administered through the Chicago Public Schools were randomly assigned to receive a Family-Based Intervention (FBI) or a General Health Intervention (GHI). Parents signed consent forms for 147 of the 157 children enrolled. Both the school-based and family-based components of the intervention were feasible, but attendance for the parent intervention sessions was low. Contrary to expectations, a downtrend in BMI Z-score was observed in both the intervention and control groups. While the data reflect a downward trend in obesity among these young Hispanic children, obesity rates remained higher at 1-year follow-up (15%) than those reported by the National Health and Nutrition Examination Survey (2009-2010) for 2-5-year-old children (12.1%). Developing evidence-based strategies for obesity prevention among Hispanic families remains a challenge. Copyright © 2012 The Obesity Society.

  19. Numerical simulation of CICC design based on optimization of ratio of copper to superconductor

    International Nuclear Information System (INIS)

    Jiang Huawei; Li Yuan; Yan Shuailing

    2007-01-01

    For cable-in-conduit conductor (CICC) structure design, a numeric simulation is proposed for conductor configuration based on optimization of ratio of copper to superconductor. The simulation outcome is in agreement with engineering design one. (authors)

  20. Family-Based Approaches to Cardiovascular Health Promotion.

    Science.gov (United States)

    Vedanthan, Rajesh; Bansilal, Sameer; Soto, Ana Victoria; Kovacic, Jason C; Latina, Jacqueline; Jaslow, Risa; Santana, Maribel; Gorga, Elio; Kasarskis, Andrew; Hajjar, Roger; Schadt, Eric E; Björkegren, Johan L; Fayad, Zahi A; Fuster, Valentin

    2016-04-12

    Cardiovascular disease is the leading cause of mortality in the world, and the increasing burden is largely a consequence of modifiable behavioral risk factors that interact with genomics and the environment. Continuous cardiovascular health promotion and disease prevention throughout the lifespan is critical, and the family is a central entity in this process. In this review, we describe the potential rationale and mechanisms that contribute to the importance of family for cardiovascular health promotion, focusing on: 1) mutual interdependence of the family system; 2) shared environment; 3) parenting style; 4) caregiver perceptions; and 5) genomics. We conclude that family-based approaches that target both caregivers and children, encourage communication among the family unit, and address the structural and environmental conditions in which families live and operate are likely to be the most effective approach to promote cardiovascular health. We describe lessons learned, future implications, and applications to ongoing and planned studies. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  1. [Family-Based Trauma-Focused Cognitive Behavioral Therapy with Three Siblings of a Refugee Family].

    Science.gov (United States)

    Bohnacker, Isabelle; Goldbeck, Lutz

    2017-10-01

    Family-Based Trauma-Focused Cognitive Behavioral Therapy with Three Siblings of a Refugee Family The possibility and relevance of a joint trauma-therapy with siblings has yet received little attention in research and clinical practice. The following case study presents a joint family-based trauma-focused therapy process with a refugee family. All three siblings suffered from post-traumatic stress disorder (PTSD) before treatment. The treatment followed the manual of Trauma Focused Cognitive Behavioral Therapy (TF-CBT; Cohen, Mannarino, Deblinger, 2009). Measures were the short version of the Child and Adolescent Trauma Screen (CATS 7-17), as well as the Teacher's Report Form (TRF). After 18 treatment sessions together with the mother, all three children did no longer meet PTSD criteria. Benefits of the joint therapy were for all three siblings to be sharing and imitating each other's coping strategies. Furthermore, the protective factor of social support after experiencing a traumatic event became evident. The apprehension of the therapist not being sufficiently neutral towards all three siblings was not observed.

  2. Numerical Calculation of Transport Based on the Drift-Kinetic Equation for Plasmas in General Toroidal Magnetic Geometry: Numerical Methods

    International Nuclear Information System (INIS)

    Reynolds, J. M.; Lopez-Bruna, D.

    2009-01-01

    In this report we continue with the description of a newly developed numerical method to solve the drift kinetic equation for ions and electrons in toroidal plasmas. Several numerical aspects, already outlined in a previous report [Informes Tecnicos Ciemat 1165, mayo 2009], will be treated now in more detail. Aside from discussing the method in the context of other existing codes, various aspects will be now explained from the viewpoint of numerical methods: the way to solve convection equations, the adopted boundary conditions, the real-space meshing procedures along with a new software developed to build them, and some additional questions related with the parallelization and the numerical integration. (Author) 16 refs

  3. Numerical methods in finance and economics a MATLAB-based introduction

    CERN Document Server

    Brandimarte, Paolo

    2006-01-01

    A state-of-the-art introduction to the powerful mathematical and statistical tools used in the field of financeThe use of mathematical models and numerical techniques is a practice employed by a growing number of applied mathematicians working on applications in finance. Reflecting this development, Numerical Methods in Finance and Economics: A MATLAB?-Based Introduction, Second Edition bridges the gap between financial theory and computational practice while showing readers how to utilize MATLAB?--the powerful numerical computing environment--for financial applications.The author provides an essential foundation in finance and numerical analysis in addition to background material for students from both engineering and economics perspectives. A wide range of topics is covered, including standard numerical analysis methods, Monte Carlo methods to simulate systems affected by significant uncertainty, and optimization methods to find an optimal set of decisions.Among this book''s most outstanding features is the...

  4. Anorexia Nervosa in Adolescence and Maudsley Family-Based Treatment

    Science.gov (United States)

    Hurst, Kim; Read, Shelly; Wallis, Andrew

    2012-01-01

    Anorexia nervosa is a serious psychiatric disorder that usually occurs in adolescence. The course of the illness can be protracted. Current empirical evidence suggests that the Maudsley Family-Based Treatment (MFBT) is efficacious for adolescents. MFBT empowers parents as a crucial treatment resource to assist in their child's recovery. The…

  5. Time-Based Work Interference with Family and Emotional ...

    African Journals Online (AJOL)

    This study investigated the relationship between time-based work interference with family and emotional exhaustion among female teachers. 304 female secondary school teachers between the ages of 26 to 54 years (M= 40.37 and SD =4.09) with educational qualifications ranging from National Certification of Education to ...

  6. Evidence-Based Family-School Interventions with Preschool Children

    Science.gov (United States)

    Bates, Stacey L.

    2005-01-01

    Fifteen studies of family-school interventions with preschool children conducted between 1980 and 2002, and published in peer-reviewed journals, were reviewed and evaluated according to the criteria developed by the Task Force on Evidence-Based Intervention in School Psychology (Division 16 and Society for the Study of School Psychology Task…

  7. A family of four stages embedded explicit six-step methods with eliminated phase-lag and its derivatives for the numerical solution of the second order problems

    Science.gov (United States)

    Simos, T. E.

    2017-11-01

    A family of four stages high algebraic order embedded explicit six-step methods, for the numerical solution of second order initial or boundary-value problems with periodical and/or oscillating solutions, are studied in this paper. The free parameters of the new proposed methods are calculated solving the linear system of equations which is produced by requesting the vanishing of the phase-lag of the methods and the vanishing of the phase-lag's derivatives of the schemes. For the new obtained methods we investigate: • Its local truncation error (LTE) of the methods.• The asymptotic form of the LTE obtained using as model problem the radial Schrödinger equation.• The comparison of the asymptotic forms of LTEs for several methods of the same family. This comparison leads to conclusions on the efficiency of each method of the family.• The stability and the interval of periodicity of the obtained methods of the new family of embedded finite difference pairs.• The applications of the new obtained family of embedded finite difference pairs to the numerical solution of several second order problems like the radial Schrödinger equation, astronomical problems etc. The above applications lead to conclusion on the efficiency of the methods of the new family of embedded finite difference pairs.

  8. Intra-Familial Stigmatization: An Adverse Outcome of a Family-Based Health Education Intervention to Reduce Childhood Obesity

    Science.gov (United States)

    Hoeeg, Didde; Grabowski, Dan; Christensen, Ulla

    2018-01-01

    Purpose: To treat childhood obesity, health education interventions are often aimed at the whole family. However, such interventions seem to have a relatively limited effect on weight loss. The purpose of this paper is to examine how families enrolled in a family-based health education intervention manage the intervention in their daily lives and…

  9. A family of memristor-based reactance-less oscillators

    KAUST Repository

    Zidan, Mohammed A.

    2013-05-03

    In this paper, we present for the first time a family of memristor-based reactance-less oscillators (MRLOs). The proposed oscillators require no reactive components, that is, inductors or capacitors, rather, the ‘resistance storage’ property of memristor is exploited to generate the oscillation. Different types of MRLO family are presented, and for each type, closed form expressions are derived for the oscillation condition, oscillation frequency, and range of oscillation. Derived equations are further verified using transient circuit simulations. A comparison between different MRLO types is also discussed. In addition, detailed fabrication steps of a memristor device and experimental results for the first MRLO physical realization are presented.

  10. A family of memristor-based reactance-less oscillators

    KAUST Repository

    Zidan, Mohammed A.; Omran, Hesham; Smith, Casey; Syed, Ahad; Radwan, Ahmed Gomaa; Salama, Khaled N.

    2013-01-01

    In this paper, we present for the first time a family of memristor-based reactance-less oscillators (MRLOs). The proposed oscillators require no reactive components, that is, inductors or capacitors, rather, the ‘resistance storage’ property of memristor is exploited to generate the oscillation. Different types of MRLO family are presented, and for each type, closed form expressions are derived for the oscillation condition, oscillation frequency, and range of oscillation. Derived equations are further verified using transient circuit simulations. A comparison between different MRLO types is also discussed. In addition, detailed fabrication steps of a memristor device and experimental results for the first MRLO physical realization are presented.

  11. A comprehensive family-based replication study of schizophrenia genes

    DEFF Research Database (Denmark)

    Aberg, Karolina A; Liu, Youfang; Bukszár, Jozsef

    2013-01-01

     768 control subjects from 6 databases and, after quality control 6298 individuals (including 3286 cases) from 1811 nuclear families. MAIN OUTCOMES AND MEASURES Case-control status for SCZ. RESULTS Replication results showed a highly significant enrichment of SNPs with small P values. Of the SNPs...... in an independent family-based replication study that, after quality control, consisted of 8107 SNPs. SETTING Linkage meta-analysis, brain transcriptome meta-analysis, candidate gene database, OMIM, relevant mouse studies, and expression quantitative trait locus databases. PATIENTS We included 11 185 cases and 10...

  12. A model for fine mapping in family based association studies.

    Science.gov (United States)

    Boehringer, Stefan; Pfeiffer, Ruth M

    2009-01-01

    Genome wide association studies for complex diseases are typically followed by more focused characterization of the identified genetic region. We propose a latent class model to evaluate a candidate region with several measured markers using observations on families. The main goal is to estimate linkage disequilibrium (LD) between the observed markers and the putative true but unobserved disease locus in the region. Based on this model, we estimate the joint distribution of alleles at the observed markers and the unobserved true disease locus, and a penetrance parameter measuring the impact of the disease allele on disease risk. A family specific random effect allows for varying baseline disease prevalences for different families. We present a likelihood framework for our model and assess its properties in simulations. We apply the model to an Alzheimer data set and confirm previous findings in the ApoE region.

  13. Pilot of "Families for Health": community-based family intervention for obesity.

    Science.gov (United States)

    Robertson, W; Friede, T; Blissett, J; Rudolf, M C J; Wallis, M; Stewart-Brown, S

    2008-11-01

    To develop and evaluate "Families for Health", a new community based family intervention for childhood obesity. Programme development, pilot study and evaluation using intention-to-treat analysis. Coventry, England. 27 overweight or obese children aged 7-13 years (18 girls, 9 boys) and their parents, from 21 families. Families for Health is a 12-week programme with parallel groups for parents and children, addressing parenting, lifestyle change and social and emotional development. Change in baseline BMI z score at the end of the programme (3 months) and 9-month follow-up. Attendance, drop-out, parents' perception of the programme, child's quality of life and self-esteem, parental mental health, parent-child relationships and lifestyle changes were also measured. Attendance rate was 62%, with 18 of the 27 (67%) children completing the programme. For the 22 children with follow-up data (including four who dropped out), BMI z score was reduced by -0.18 (95% CI -0.30 to -0.05) at 3 months and -0.21 (-0.35 to -0.07) at 9 months. Statistically significant improvements were observed in children's quality of life and lifestyle (reduced sedentary behaviour, increased steps and reduced exposure to unhealthy foods), child-parent relationships and parents' mental health. Fruit and vegetable consumption, participation in moderate/vigorous exercise and children's self-esteem did not change significantly. Topics on parenting skills, activity and food were rated as helpful and used with confidence by most parents. Families for Health is a promising new childhood obesity intervention. Definitive evaluation of its clinical effectiveness by randomised controlled trial is now required.

  14. Functional-analytic and numerical issues in splitting methods for total variation-based image reconstruction

    International Nuclear Information System (INIS)

    Hintermüller, Michael; Rautenberg, Carlos N; Hahn, Jooyoung

    2014-01-01

    Variable splitting schemes for the function space version of the image reconstruction problem with total variation regularization (TV-problem) in its primal and pre-dual formulations are considered. For the primal splitting formulation, while existence of a solution cannot be guaranteed, it is shown that quasi-minimizers of the penalized problem are asymptotically related to the solution of the original TV-problem. On the other hand, for the pre-dual formulation, a family of parametrized problems is introduced and a parameter dependent contraction of an associated fixed point iteration is established. Moreover, the theory is validated by numerical tests. Additionally, the augmented Lagrangian approach is studied, details on an implementation on a staggered grid are provided and numerical tests are shown. (paper)

  15. A family of quantization based piecewise linear filter networks

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    1992-01-01

    A family of quantization-based piecewise linear filter networks is proposed. For stationary signals, a filter network from this family is a generalization of the classical Wiener filter with an input signal and a desired response. The construction of the filter network is based on quantization...... of the input signal x(n) into quantization classes. With each quantization class is associated a linear filter. The filtering at time n is carried out by the filter belonging to the actual quantization class of x(n ) and the filters belonging to the neighbor quantization classes of x(n) (regularization......). This construction leads to a three-layer filter network. The first layer consists of the quantization class filters for the input signal. The second layer carries out the regularization between neighbor quantization classes, and the third layer constitutes a decision of quantization class from where the resulting...

  16. Obfuscation Framework Based on Functionally Equivalent Combinatorial Logic Families

    Science.gov (United States)

    2008-03-01

    of Defense, or the United States Government . AFIT/GCS/ENG/08-12 Obfuscation Framework Based on Functionally Equivalent Combinatorial Logic Families...time, United States policy strongly encourages the sale and transfer of some military equipment to foreign governments and makes it easier for...Proceedings of the International Conference on Availability, Reliability and Security, 2007. 14. McDonald, J. Todd and Alec Yasinsac. “Of unicorns and random

  17. The effect of numerical techniques on differential equation based chaotic generators

    KAUST Repository

    Zidan, Mohammed A.

    2012-07-29

    In this paper, we study the effect of the numerical solution accuracy on the digital implementation of differential chaos generators. Four systems are built on a Xilinx Virtex 4 FPGA using Euler, mid-point, and Runge-Kutta fourth order techniques. The twelve implementations are compared based on the FPGA used area, maximum throughput, maximum Lyapunov exponent, and autocorrelation confidence region. Based on circuit performance and the chaotic response of the different implementations, it was found that less complicated numerical solution has better chaotic response and higher throughput.

  18. Numerical solution of the unsteady diffusion-convection-reaction equation based on improved spectral Galerkin method

    Science.gov (United States)

    Zhong, Jiaqi; Zeng, Cheng; Yuan, Yupeng; Zhang, Yuzhe; Zhang, Ye

    2018-04-01

    The aim of this paper is to present an explicit numerical algorithm based on improved spectral Galerkin method for solving the unsteady diffusion-convection-reaction equation. The principal characteristics of this approach give the explicit eigenvalues and eigenvectors based on the time-space separation method and boundary condition analysis. With the help of Fourier series and Galerkin truncation, we can obtain the finite-dimensional ordinary differential equations which facilitate the system analysis and controller design. By comparing with the finite element method, the numerical solutions are demonstrated via two examples. It is shown that the proposed method is effective.

  19. A natural approach to convey numerical digits using hand activity recognition based on hand shape features

    Science.gov (United States)

    Chidananda, H.; Reddy, T. Hanumantha

    2017-06-01

    This paper presents a natural representation of numerical digit(s) using hand activity analysis based on number of fingers out stretched for each numerical digit in sequence extracted from a video. The analysis is based on determining a set of six features from a hand image. The most important features used from each frame in a video are the first fingertip from top, palm-line, palm-center, valley points between the fingers exists above the palm-line. Using this work user can convey any number of numerical digits using right or left or both the hands naturally in a video. Each numerical digit ranges from 0 to9. Hands (right/left/both) used to convey digits can be recognized accurately using the valley points and with this recognition whether the user is a right / left handed person in practice can be analyzed. In this work, first the hand(s) and face parts are detected by using YCbCr color space and face part is removed by using ellipse based method. Then, the hand(s) are analyzed to recognize the activity that represents a series of numerical digits in a video. This work uses pixel continuity algorithm using 2D coordinate geometry system and does not use regular use of calculus, contours, convex hull and datasets.

  20. Optimal design of a composite space shield based on numerical simulations

    International Nuclear Information System (INIS)

    Son, Byung Jin; Yoo, Jeong Hoon; Lee, Min Hyung

    2015-01-01

    In this study, optimal design of a stuffed Whipple shield is proposed by using numerical simulations and new penetration criterion. The target model was selected based on the shield model used in the Columbus module of the international space station. Because experimental results can be obtained only in the low velocity region below 7 km/s, it is required to derive the Ballistic limit curve (BLC) in the high velocity region above 7 km/s by numerical simulation. AUTODYN-2D, the commercial hydro-code package, was used to simulate the nonlinear transient analysis for the hypervelocity impact. The Smoothed particle hydrodynamics (SPH) method was applied to projectile and bumper modeling to represent the debris cloud generated after the impact. Numerical simulation model and selected material properties were validated through a quantitative comparison between numerical and experimental results. A new criterion to determine whether the penetration occurs or not is proposed from kinetic energy analysis by numerical simulation in the velocity region over 7 km/s. The parameter optimization process was performed to improve the protection ability at a specific condition through the Design of experiment (DOE) method and the Response surface methodology (RSM). The performance of the proposed optimal design was numerically verified.

  1. Family-Based Benchmarking of Copy Number Variation Detection Software.

    Science.gov (United States)

    Nutsua, Marcel Elie; Fischer, Annegret; Nebel, Almut; Hofmann, Sylvia; Schreiber, Stefan; Krawczak, Michael; Nothnagel, Michael

    2015-01-01

    The analysis of structural variants, in particular of copy-number variations (CNVs), has proven valuable in unraveling the genetic basis of human diseases. Hence, a large number of algorithms have been developed for the detection of CNVs in SNP array signal intensity data. Using the European and African HapMap trio data, we undertook a comparative evaluation of six commonly used CNV detection software tools, namely Affymetrix Power Tools (APT), QuantiSNP, PennCNV, GLAD, R-gada and VEGA, and assessed their level of pair-wise prediction concordance. The tool-specific CNV prediction accuracy was assessed in silico by way of intra-familial validation. Software tools differed greatly in terms of the number and length of the CNVs predicted as well as the number of markers included in a CNV. All software tools predicted substantially more deletions than duplications. Intra-familial validation revealed consistently low levels of prediction accuracy as measured by the proportion of validated CNVs (34-60%). Moreover, up to 20% of apparent family-based validations were found to be due to chance alone. Software using Hidden Markov models (HMM) showed a trend to predict fewer CNVs than segmentation-based algorithms albeit with greater validity. PennCNV yielded the highest prediction accuracy (60.9%). Finally, the pairwise concordance of CNV prediction was found to vary widely with the software tools involved. We recommend HMM-based software, in particular PennCNV, rather than segmentation-based algorithms when validity is the primary concern of CNV detection. QuantiSNP may be used as an additional tool to detect sets of CNVs not detectable by the other tools. Our study also reemphasizes the need for laboratory-based validation, such as qPCR, of CNVs predicted in silico.

  2. Efficient family-based model checking via variability abstractions

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar; Al-Sibahi, Ahmad Salim; Brabrand, Claus

    2016-01-01

    with the abstract model checking of the concrete high-level variational model. This allows the use of Spin with all its accumulated optimizations for efficient verification of variational models without any knowledge about variability. We have implemented the transformations in a prototype tool, and we illustrate......Many software systems are variational: they can be configured to meet diverse sets of requirements. They can produce a (potentially huge) number of related systems, known as products or variants, by systematically reusing common parts. For variational models (variational systems or families...... of related systems), specialized family-based model checking algorithms allow efficient verification of multiple variants, simultaneously, in a single run. These algorithms, implemented in a tool Snip, scale much better than ``the brute force'' approach, where all individual systems are verified using...

  3. Numerical Problems and Agent-Based Models for a Mass Transfer Course

    Science.gov (United States)

    Murthi, Manohar; Shea, Lonnie D.; Snurr, Randall Q.

    2009-01-01

    Problems requiring numerical solutions of differential equations or the use of agent-based modeling are presented for use in a course on mass transfer. These problems were solved using the popular technical computing language MATLABTM. Students were introduced to MATLAB via a problem with an analytical solution. A more complex problem to which no…

  4. Simulation of Supersonic Base Flows: Numerical Investigations Using DNS, LES, and URANS

    Science.gov (United States)

    2006-10-01

    global instabilities were found for a two-dimensional bluff body with a blunt base by Hannemann & Oertel (1989). Oertel (1990) found that the... Hannemann , K. & Oertel, H. 1989 Numerical simulation of the absolutely and convectively unstable wake. J. Fluid Mech. 199, 55–88. Harris, P. J. 1997

  5. Numerical Analysis of an All-optical Logic XOR gate based on an active MZ interferometer

    DEFF Research Database (Denmark)

    Nielsen, Mads Lønstrup; Mørk, Jesper; Fjelde, T.

    2002-01-01

    are investigated numerically for a Mach-Zehnder interferometer (MZI) based XOR gate. For bit-rates up to 40 Gb/s, the synchronization tolerance of a MZI XOR gate is determined by the pulse width for RZ format. For the NRZ format, the tolerance decreases as the rise/fall-time approaches the timeslot. The gate...

  6. Structure of unilamellar vesicles: Numerical analysis based on small-angle neutron scattering data

    International Nuclear Information System (INIS)

    Zemlyanaya, E. V.; Kiselev, M. A.; Zbytovska, J.; Almasy, L.; Aswal, V. K.; Strunz, P.; Wartewig, S.; Neubert, R.

    2006-01-01

    The structure of polydispersed populations of unilamellar vesicles is studied by small-angle neutron scattering for three types of lipid systems, namely, single-, two-and four-component vesicular systems. Results of the numerical analysis based on the separated-form-factor model are reported

  7. [Family Climate, Parental Partner Relationships and Symptom Formation in Children - Mentalisation- Based Family Therapy for Childhood Headache].

    Science.gov (United States)

    Hantel-Quitmann, Wolfgang; Weidtmann, Katja

    2016-01-01

    The emotional family climate is considered both an effective risk and protective factor for child development. Factors such as negative experiences parents made during their childhood or adolescence, which can reoccur as intergenerational transmission, a low partnership quality and a high level of conflict seem to be particularly relevant for the quality of the emotional family climate. Consequently, the relationship between partners, as the core relation within families, is particularly important for the family climate and subsequently for the development of the child. For this reason, problems in parent relationships should receive special attention in family therapeutic interventions. Mentalisation-based family therapy (MBF-T) offers promising approaches in this context. The key principles of mentalisation are introduced and the links between family and mentalisation are presented, followed by information on the history, objectives and the procedures of MBF-T. A case study of a family therapy, in which a child suffers from chronic headache, illustrates the connection and interrelation between family climate, family conflicts and the parental relationship, and it will further show the importance of mentalisation-based elements for therapeutic treatments.

  8. Are single-parent families different from two-parent families in the treatment of adolescent bulimia nervosa using family-based treatment?

    Science.gov (United States)

    Doyle, Angela Celio; McLean, Carmen; Washington, Blaine N; Hoste, Renee Rienecke; le Grange, Daniel

    2009-03-01

    To examine whether family-based treatment (FBT) for adolescent bulimia nervosa (BN), which emphasizes family involvement in helping to reduce binge eating and purging behaviors, is differentially efficacious in single-parent families versus two-parent families. Forty-one adolescents (97.6% female; 16.0 +/- 1.7 years old) with either BN (n = 18) or subthreshold BN (n = 23) were randomized to FBT as part of a larger randomized controlled trial studying treatments for adolescent BN. Two-parent (n = 27; 65.9%) and single-parent (n = 14; 34.2%) families were compared on demographic variables, presence of comorbid psychiatric illnesses, and symptoms of BN at baseline, post, and 6-month follow-up. ANOVA and chi-square analyses revealed no statistically significant differences between two-parent and single-parent families on any variables with the exception of ethnicity, for which a greater proportion of Caucasians and Hispanic families had two- parent families compared with African-American families (chi(2) = 8.68, p = .01). These findings suggest that FBT may be an appropriate and efficacious treatment for single-parent families as well as two-parent families, despite the reliance on parental intervention to reduce bulimic symptoms and normalize eating patterns.

  9. Advanced numerical simulation based on a non-local micromorphic model for metal forming processes

    Directory of Open Access Journals (Sweden)

    Diamantopoulou Evangelia

    2016-01-01

    Full Text Available An advanced numerical methodology is developed for metal forming simulation based on thermodynamically-consistent nonlocal constitutive equations accounting for various fully coupled mechanical phenomena under finite strain in the framework of micromorphic continua. The numerical implementation into ABAQUS/Explicit is made for 2D quadrangular elements thanks to the VUEL users’ subroutine. Simple examples with presence of a damaged area are made in order to show the ability of the proposed methodology to describe the independence of the solution from the space discretization.

  10. A Community-Based Intervention Program to Enhance Family Communication and Family Well-being: The Learning Families Project in Hong Kong.

    Science.gov (United States)

    Shen, Chen; Wan, Alice; Kwok, Lit Tung; Pang, Sally; Wang, Xin; Stewart, Sunita M; Lam, Tai Hing; Chan, Sophia Siu Chee

    2017-01-01

    Family communication is important to maintain family relationships and family well-being. To enhance family communication and family well-being, a community-based "Learning Families Project," based on the social ecological model was developed in Kwun Tong in Hong Kong, a district with high prevalence of family problems. This quasi-experimental study included two nearby government subsidized low-rent housing estates separated by busy main roads, as the intervention [Tsui Ping (South) Estate] and control (Shun Tin Estate) estate. The main intervention was resident training programs, such as talks, day camps, and thematic activities. No program was implemented in the control estate. Participants in the intervention group received assessments before the intervention (T1), immediately after the intervention (T2), and 6 weeks after the intervention (T3). Control group participants were assessed at baseline (March to April 2011) and follow-up (December 2011 to March 2012). Assessments of family communication (time and perceived adequacy) and family well-being (harmony, happiness, and health) at T1 and T3 were obtained in the intervention group to examine within-group changes. In addition, these differences in outcomes in the intervention group were compared with those in the control group to examine the effectiveness of the intervention. Family communication time and perceived communication adequacy increased significantly in the intervention group ( n  = 515) with a small effect size (Cohen effect d : 0.10 and 0.24, respectively). Compared with the control group ( n  = 476), the improvements in family communication time and perceived communication adequacy (Cohen effect d : 0.13 and 0.14, respectively), and perceived family harmony and happiness (Cohen effect d : 0.12 and 0.12, respectively) were significantly greater in the intervention group, adjusting for age and education, suggesting the intervention was effective in improving family communication and

  11. Solution of AntiSeepage for Mengxi River Based on Numerical Simulation of Unsaturated Seepage

    Science.gov (United States)

    Ji, Youjun; Zhang, Linzhi; Yue, Jiannan

    2014-01-01

    Lessening the leakage of surface water can reduce the waste of water resources and ground water pollution. To solve the problem that Mengxi River could not store water enduringly, geology investigation, theoretical analysis, experiment research, and numerical simulation analysis were carried out. Firstly, the seepage mathematical model was established based on unsaturated seepage theory; secondly, the experimental equipment for testing hydraulic conductivity of unsaturated soil was developed to obtain the curve of two-phase flow. The numerical simulation of leakage in natural conditions proves the previous inference and leakage mechanism of river. At last, the seepage control capacities of different impervious materials were compared by numerical simulations. According to the engineering actuality, the impervious material was selected. The impervious measure in this paper has been proved to be effectible by hydrogeological research today. PMID:24707199

  12. Solution of AntiSeepage for Mengxi River Based on Numerical Simulation of Unsaturated Seepage

    Directory of Open Access Journals (Sweden)

    Youjun Ji

    2014-01-01

    Full Text Available Lessening the leakage of surface water can reduce the waste of water resources and ground water pollution. To solve the problem that Mengxi River could not store water enduringly, geology investigation, theoretical analysis, experiment research, and numerical simulation analysis were carried out. Firstly, the seepage mathematical model was established based on unsaturated seepage theory; secondly, the experimental equipment for testing hydraulic conductivity of unsaturated soil was developed to obtain the curve of two-phase flow. The numerical simulation of leakage in natural conditions proves the previous inference and leakage mechanism of river. At last, the seepage control capacities of different impervious materials were compared by numerical simulations. According to the engineering actuality, the impervious material was selected. The impervious measure in this paper has been proved to be effectible by hydrogeological research today.

  13. Numerical simulation of multi-dimensional two-phase flow based on flux vector splitting

    Energy Technology Data Exchange (ETDEWEB)

    Staedtke, H.; Franchello, G.; Worth, B. [Joint Research Centre - Ispra Establishment (Italy)

    1995-09-01

    This paper describes a new approach to the numerical simulation of transient, multidimensional two-phase flow. The development is based on a fully hyperbolic two-fluid model of two-phase flow using separated conservation equations for the two phases. Features of the new model include the existence of real eigenvalues, and a complete set of independent eigenvectors which can be expressed algebraically in terms of the major dependent flow parameters. This facilitates the application of numerical techniques specifically developed for high speed single-phase gas flows which combine signal propagation along characteristic lines with the conservation property with respect to mass, momentum and energy. Advantages of the new model for the numerical simulation of one- and two- dimensional two-phase flow are discussed.

  14. How does family functioning effect the outcome of family based treatment for adolescents with severe anorexia nervosa?

    Science.gov (United States)

    Wallis, Andrew; Miskovic-Wheatley, Jane; Madden, Sloane; Rhodes, Paul; Crosby, Ross D; Cao, Li; Touyz, Stephen

    2017-01-01

    The aim of this research was to investigate the relationship between family functioning, adolescent-parent attachment and remission, as well as changes in these variables over time for adolescents with severe anorexia nervosa treated with family based treatment (FBT). Understanding how families respond to treatment is important because the family will be the ongoing context for psychosocial development in the longer term. The relationship between family functioning and outcome is also an important variable because it is potentially modifiable during treatment and this may improve outcome. Fifty-seven female adolescents treated with FBT in a randomised controlled trial were assessed at baseline, FBT session 20 and 12-months post FBT session 20. Data on family functioning and adolescent-parent attachment was collected from patients and their parents at each time point. A series of regression analyses were used to determine the relationship between family functioning and comorbidity at baseline, and the relationship with remission status over time. Repeat measure mixed-effects models were used to assess changes in family functioning and attachment quality over time. Greater adolescent perceived family functioning impairment was positively related to psychiatric comorbidity at the start of treatment. Conversely, better family functioning predicted higher self-esteem and stronger attachment quality. Adolescent's reporting better general family functioning, communication and problem solving were more likely to be remitted at session 20, but not at 12-month follow-up. There was no overall improvement in family functioning for any respondent either during treatment or at follow-up, and no significant relationship between change and remission at either session 20 or follow-up. The adolescent's perspective on family functioning at the start of treatment impacts on a positive outcome. Addressing family issues earlier in FBT may be important for some patients. Further

  15. GIS-based two-dimensional numerical simulation of rainfall-induced debris flow

    Directory of Open Access Journals (Sweden)

    C. Wang

    2008-02-01

    Full Text Available This paper aims to present a useful numerical method to simulate the propagation and deposition of debris flow across the three dimensional complex terrain. A depth-averaged two-dimensional numerical model is developed, in which the debris and water mixture is assumed to be continuous, incompressible, unsteady flow. The model is based on the continuity equations and Navier-Stokes equations. Raster grid networks of digital elevation model in GIS provide a uniform grid system to describe complex topography. As the raster grid can be used as the finite difference mesh, the continuity and momentum equations are solved numerically using the finite difference method. The numerical model is applied to simulate the rainfall-induced debris flow occurred in 20 July 2003, in Minamata City of southern Kyushu, Japan. The simulation reproduces the propagation and deposition and the results are in good agreement with the field investigation. The synthesis of numerical method and GIS makes possible the solution of debris flow over a realistic terrain, and can be used to estimate the flow range, and to define potentially hazardous areas for homes and road section.

  16. Effectiveness of Family, Child, and Family-Child Based Intervention on ADHD Symptoms of Students with Disabilities

    Science.gov (United States)

    Malekpour, Mokhtar; Aghababaei, Sara; Hadi, Samira

    2014-01-01

    The aim of the present study was to investigate and compare the effectiveness of family, child, and family-child based intervention on the rate of ADHD symptoms in third grade students. The population for this study was all of students with ADHD diagnoses in the city of Isfahan, Iran. The multistage random sampling method was used to select the 60…

  17. Generalized model for Memristor-based Wien family oscillators

    KAUST Repository

    Talukdar, Abdul Hafiz Ibne

    2012-07-23

    In this paper, we report the unconventional characteristics of Memristor in Wien oscillators. Generalized mathematical models are developed to analyze four members of the Wien family using Memristors. Sustained oscillation is reported for all types though oscillating resistance and time dependent poles are present. We have also proposed an analytical model to estimate the desired amplitude of oscillation before the oscillation starts. These Memristor-based oscillation results, presented for the first time, are in good agreement with simulation results. © 2011 Elsevier Ltd.

  18. Field-based dynamic light scattering microscopy: theory and numerical analysis.

    Science.gov (United States)

    Joo, Chulmin; de Boer, Johannes F

    2013-11-01

    We present a theoretical framework for field-based dynamic light scattering microscopy based on a spectral-domain optical coherence phase microscopy (SD-OCPM) platform. SD-OCPM is an interferometric microscope capable of quantitative measurement of amplitude and phase of scattered light with high phase stability. Field-based dynamic light scattering (F-DLS) analysis allows for direct evaluation of complex-valued field autocorrelation function and measurement of localized diffusive and directional dynamic properties of biological and material samples with high spatial resolution. In order to gain insight into the information provided by F-DLS microscopy, theoretical and numerical analyses are performed to evaluate the effect of numerical aperture of the imaging optics. We demonstrate that sharp focusing of fields affects the measured diffusive and transport velocity, which leads to smaller values for the dynamic properties in the sample. An approach for accurately determining the dynamic properties of the samples is discussed.

  19. An analytically based numerical method for computing view factors in real urban environments

    Science.gov (United States)

    Lee, Doo-Il; Woo, Ju-Wan; Lee, Sang-Hyun

    2018-01-01

    A view factor is an important morphological parameter used in parameterizing in-canyon radiative energy exchange process as well as in characterizing local climate over urban environments. For realistic representation of the in-canyon radiative processes, a complete set of view factors at the horizontal and vertical surfaces of urban facets is required. Various analytical and numerical methods have been suggested to determine the view factors for urban environments, but most of the methods provide only sky-view factor at the ground level of a specific location or assume simplified morphology of complex urban environments. In this study, a numerical method that can determine the sky-view factors ( ψ ga and ψ wa ) and wall-view factors ( ψ gw and ψ ww ) at the horizontal and vertical surfaces is presented for application to real urban morphology, which are derived from an analytical formulation of the view factor between two blackbody surfaces of arbitrary geometry. The established numerical method is validated against the analytical sky-view factor estimation for ideal street canyon geometries, showing a consolidate confidence in accuracy with errors of less than 0.2 %. Using a three-dimensional building database, the numerical method is also demonstrated to be applicable in determining the sky-view factors at the horizontal (roofs and roads) and vertical (walls) surfaces in real urban environments. The results suggest that the analytically based numerical method can be used for the radiative process parameterization of urban numerical models as well as for the characterization of local urban climate.

  20. Advances in family-based interventions in the neonatal ICU.

    Science.gov (United States)

    Welch, Martha G; Myers, Michael M

    2016-04-01

    Despite advances in medical care, preterm infants remain at risk for many adverse outcomes. This article reviews findings from several recent neonatal ICU (NICU) interventions and a trial of a novel nurture-based approach, Family Nurture Intervention (FNI). Recent trials reviewed here find positive effects of a variety of family-related interventions focused on parental guidance. These interventions target prescribed physical activities with infants, parents' stress, and the parents' ability to recognize their positive and negative behaviors with their infants. Beneficial effects include reductions in parenting stress, maternal anxiety, and depression. A different approach, FNI, is aimed at establishing mother-infant emotional connection. As in other trials, FNI also decreased maternal symptoms of anxiety and depression, and increased maternal sensitivity. Additionally, FNI led to positive short and long-term effects on infant neurobehavioral outcomes at term and 18 months. A number of recent parent-based NICU interventions have been effective at reducing preterm parent stress. Another, FNI, has positive effects on both maternal and infant outcomes and promises to be cost-effective. Future decreases in long-term morbidity in preterm infants will increasingly rely on nonmedical interventions. Therefore, the rigorous development and testing of such interventions should be a high priority in perinatology research.

  1. Evaluation of a Family-based Substance Abuse Prevention Program Targeted for the Middle School Years.

    Science.gov (United States)

    Abbey, Antonia; Pilgrim, Colleen; Hendrickson, Peggy; Buresl, Sue

    2000-01-01

    Evaluates family-based substance abuse prevention program implemented in a rural community for families with middle school students. In comparison with nonparticipants, students had higher family cohesion, less family fighting, greater school attachment, higher self-esteem, and believed alcohol should be consumed at an older age, at one-year…

  2. Attachment-based interventions for families with young children.

    Science.gov (United States)

    Woodhouse, Susan S

    2018-05-21

    Given a large body of research indicating links between child attachment and later mental health outcomes, interventions that promote children's secure attachment to their caregivers have the potential to contribute to prevention of psychopathology and promotion of well-being. A number of attachment-based interventions have been developed to support parents, enhance caregiving quality, and promote children's attachment security with the aim of improving children's mental health. There is now a growing evidence base to support the efficacy of a number of these interventions. The present literature review and introduction to the special issue on attachment-based interventions for families with young children describes key aspects of attachment theory and research that form the theoretical and empirical background for attachment-based interventions, and introduces seven case studies illustrating five different attachment-based interventions. The case studies represent a variety of attachment-based models, including both group and individual treatments, and show applications across a range of caregiver contexts. © 2018 Wiley Periodicals, Inc.

  3. Reliability-Based Stability Analysis of Rock Slopes Using Numerical Analysis and Response Surface Method

    Science.gov (United States)

    Dadashzadeh, N.; Duzgun, H. S. B.; Yesiloglu-Gultekin, N.

    2017-08-01

    While advanced numerical techniques in slope stability analysis are successfully used in deterministic studies, they have so far found limited use in probabilistic analyses due to their high computation cost. The first-order reliability method (FORM) is one of the most efficient probabilistic techniques to perform probabilistic stability analysis by considering the associated uncertainties in the analysis parameters. However, it is not possible to directly use FORM in numerical slope stability evaluations as it requires definition of a limit state performance function. In this study, an integrated methodology for probabilistic numerical modeling of rock slope stability is proposed. The methodology is based on response surface method, where FORM is used to develop an explicit performance function from the results of numerical simulations. The implementation of the proposed methodology is performed by considering a large potential rock wedge in Sumela Monastery, Turkey. The accuracy of the developed performance function to truly represent the limit state surface is evaluated by monitoring the slope behavior. The calculated probability of failure is compared with Monte Carlo simulation (MCS) method. The proposed methodology is found to be 72% more efficient than MCS, while the accuracy is decreased with an error of 24%.

  4. NUMERICAL SIMULATION OF ELECTRICAL IMPEDANCE TOMOGRAPHY PROBLEM AND STUDY OF APPROACH BASED ON FINITE VOLUME METHOD

    Directory of Open Access Journals (Sweden)

    Ye. S. Sherina

    2014-01-01

    Full Text Available This research has been aimed to carry out a study of peculiarities that arise in a numerical simulation of the electrical impedance tomography (EIT problem. Static EIT image reconstruction is sensitive to a measurement noise and approximation error. A special consideration has been given to reducing of the approximation error, which originates from numerical implementation drawbacks. This paper presents in detail two numerical approaches for solving EIT forward problem. The finite volume method (FVM on unstructured triangular mesh is introduced. In order to compare this approach, the finite element (FEM based forward solver was implemented, which has gained the most popularity among researchers. The calculated potential distribution with the assumed initial conductivity distribution has been compared to the analytical solution of a test Neumann boundary problem and to the results of problem simulation by means of ANSYS FLUENT commercial software. Two approaches to linearized EIT image reconstruction are discussed. Reconstruction of the conductivity distribution is an ill-posed problem, typically requiring a large amount of computation and resolved by minimization techniques. The objective function to be minimized is constructed of measured voltage and calculated boundary voltage on the electrodes. A classical modified Newton type iterative method and the stochastic differential evolution method are employed. A software package has been developed for the problem under investigation. Numerical tests were conducted on simulated data. The obtained results could be helpful to researches tackling the hardware and software issues for medical applications of EIT.

  5. Numerical Simulations Of Catastrophic Disruption Of Porous Bodies: Application To Dark-type Asteroids And Kuiper-belt Family Formation

    Science.gov (United States)

    Michel, Patrick; Jutzi, M.; Richardson, D. C.; Benz, W.

    2010-10-01

    Asteroids of dark (e.g. C, D) taxonomic classes as well as Kuiper Belt objects and comets are believed to have high porosity, not only in the form of large voids but also in the form of micro-pores. The presence of such microscale porosity introduces additional physics in the impact process. We have enhanced our 3D SPH hydrocode, used to simulate catastrophic breakups, with a model of porosity [1] and validated it at small scale by comparison with impact experiments on pumice targets [2]. Our model is now ready to be applied to a large range of problems. In particular, accounting for the gravitational phase of an impact, we can study the formation of dark-type asteroid families, such as Veritas, and Kuiper-Belt families, such as Haumea. Recently we characterized for the first time the catastrophic impact energy threshold, usually called Q*D, as a function of the target's diameter, porosity, material strength and impact speed [3]. Regarding the mentioned families, our preliminary results show that accounting for porosity leads to different outcomes that may better represent their properties and constrain their definition. In particular, for Veritas, we find that its membership may need some revision [4]. The parameter space is still large, many interesting families need to be investigated and our model will be applied to a large range of cases. PM, MJ and DCR acknowledge financial support from the French Programme National de Planétologie, NASA PG&G "Small Bodies and Planetary Collisions" and NASA under Grant No. NNX08AM39G issued through the Office of Space Science, respectively. [1] Jutzi et al. 2008. Icarus 198, 242-255; [2] Jutzi et al. 2009. Icarus 201, 802-813; [3] Jutzi et al. 2010. Fragment properties at the catastrophic disruption threshold: The effect of the parent body's internal structure, Icarus 207, 54-65; [4] Michel et al. 2010. Icarus, submitted.

  6. "Physically-based" numerical experiment to determine the dominant hillslope processes during floods?

    Science.gov (United States)

    Gaume, Eric; Esclaffer, Thomas; Dangla, Patrick; Payrastre, Olivier

    2016-04-01

    To study the dynamics of hillslope responses during flood event, a fully coupled "physically-based" model for the combined numerical simulation of surface runoff and underground flows has been developed. A particular attention has been given to the selection of appropriate numerical schemes for the modelling of both processes and of their coupling. Surprisingly, the most difficult question to solve, from a numerical point of view, was not related to the coupling of two processes with contrasted kinetics such as surface and underground flows, but to the high gradient infiltration fronts appearing in soils, source of numerical diffusion, instabilities and sometimes divergence. The model being elaborated, it has been successfully tested against results of high quality experiments conducted on a laboratory sandy slope in the early eighties, which is still considered as a reference hillslope experimental setting (Abdul & Guilham). The model appeared able to accurately simulate the pore pressure distributions observed in this 1.5 meter deep and wide laboratory hillslope, as well as its outflow hydrograph shapes and the measured respective contributions of direct runoff and groundwater to these outflow hydrographs. Based on this great success, the same model has been used to simulate the response of a theoretical 100-meter wide and 10% sloped hillslope, with a 2 meter deep pervious soil and impervious bedrock. Three rain events have been tested: a 100 millimeter rainfall event over 10 days, over 1 day or over one hour. The simulated responses are hydrologically not realistic and especially the fast component of the response, that is generally observed in the real-world and explains flood events, is almost absent of the simulated response. Thinking a little about the whole problem, the simulation results appears totally logical according to the proposed model. The simulated response, in fact a recession hydrograph, corresponds to a piston flow of a relatively uniformly

  7. Perceived Family Resources Based on Number of Members with ADHD

    Science.gov (United States)

    Corwin, Melinda; Mulsow, Miriam; Feng, Du

    2012-01-01

    Objective: This study examines how the number of family members with ADHD affects other family members' perceived resources. Method: A total of 40 adolescents diagnosed with ADHD and their mothers, fathers, and adolescent siblings living in the household participated. Hierarchical linear modeling was used to analyze family-level data from a total…

  8. Quantity estimation based on numerical cues in the mealworm beetle (Tenebrio molitor

    Directory of Open Access Journals (Sweden)

    Pau eCarazo

    2012-11-01

    Full Text Available In this study, we used a biologically relevant experimental procedure to ask whether mealworm beetles (Tenebrio molitor are spontaneously capable of assessing quantities based on numerical cues. Like other insect species, mealworm beetles adjust their reproductive behaviour (i.e. investment in mate guarding according to the perceived risk of sperm competition (i.e. probability that a female will mate with another male. To test whether males have the ability to estimate numerosity based on numerical cues, we staged matings between virgin females and virgin males in which we varied the number of rival males the experimental male had access to immediately preceding mating as a cue to sperm competition risk (from 1 to 4. Rival males were presented sequentially, and we controlled for continuous cues by ensuring that males in all treatments were exposed to the same amount of male-male contact. Males exhibited a marked increase in the time they devoted to mate guarding in response to an increase in the number of different rival males they were exposed to. Since males could not rely on continuous cues we conclude that they kept a running tally of the number of individuals they encountered serially, which meets the requirements of the basic ordinality and cardinality principles of proto-counting. Our results thus offer good evidence of ‘true’ numerosity estimation or quantity estimation and, along with recent studies in honey-bees, suggest that vertebrates and invertebrates share similar core systems of non-verbal numerical representation.

  9. Online Monitoring System of Air Distribution in Pulverized Coal-Fired Boiler Based on Numerical Modeling

    Science.gov (United States)

    Żymełka, Piotr; Nabagło, Daniel; Janda, Tomasz; Madejski, Paweł

    2017-12-01

    Balanced distribution of air in coal-fired boiler is one of the most important factors in the combustion process and is strongly connected to the overall system efficiency. Reliable and continuous information about combustion airflow and fuel rate is essential for achieving optimal stoichiometric ratio as well as efficient and safe operation of a boiler. Imbalances in air distribution result in reduced boiler efficiency, increased gas pollutant emission and operating problems, such as corrosion, slagging or fouling. Monitoring of air flow trends in boiler is an effective method for further analysis and can help to appoint important dependences and start optimization actions. Accurate real-time monitoring of the air distribution in boiler can bring economical, environmental and operational benefits. The paper presents a novel concept for online monitoring system of air distribution in coal-fired boiler based on real-time numerical calculations. The proposed mathematical model allows for identification of mass flow rates of secondary air to individual burners and to overfire air (OFA) nozzles. Numerical models of air and flue gas system were developed using software for power plant simulation. The correctness of the developed model was verified and validated with the reference measurement values. The presented numerical model for real-time monitoring of air distribution is capable of giving continuous determination of the complete air flows based on available digital communication system (DCS) data.

  10. Online Monitoring System of Air Distribution in Pulverized Coal-Fired Boiler Based on Numerical Modeling

    Directory of Open Access Journals (Sweden)

    Żymełka Piotr

    2017-12-01

    Full Text Available Balanced distribution of air in coal-fired boiler is one of the most important factors in the combustion process and is strongly connected to the overall system efficiency. Reliable and continuous information about combustion airflow and fuel rate is essential for achieving optimal stoichiometric ratio as well as efficient and safe operation of a boiler. Imbalances in air distribution result in reduced boiler efficiency, increased gas pollutant emission and operating problems, such as corrosion, slagging or fouling. Monitoring of air flow trends in boiler is an effective method for further analysis and can help to appoint important dependences and start optimization actions. Accurate real-time monitoring of the air distribution in boiler can bring economical, environmental and operational benefits. The paper presents a novel concept for online monitoring system of air distribution in coal-fired boiler based on real-time numerical calculations. The proposed mathematical model allows for identification of mass flow rates of secondary air to individual burners and to overfire air (OFA nozzles. Numerical models of air and flue gas system were developed using software for power plant simulation. The correctness of the developed model was verified and validated with the reference measurement values. The presented numerical model for real-time monitoring of air distribution is capable of giving continuous determination of the complete air flows based on available digital communication system (DCS data.

  11. MZ twin pairs or MZ singletons in population family-based GWAS? More power in pairs

    NARCIS (Netherlands)

    Minica, C.C.; Boomsma, D.I.; Vink, J.M.; Dolan, C.V.

    2014-01-01

    Family-based genome-wide association studies (GWAS) involve testing the genetic association of (many) genetic variants with the phenotype of interest, while taking into account the relatedness among family members. Occasionally in family-based GWAS, including monozygotic (MZ) twins, the data from

  12. The Melbourne Family Support Program: evidence-based strategies that prepare family caregivers for supporting palliative care patients

    Science.gov (United States)

    Hudson, Peter; Aranda, Sanchia

    2014-01-01

    Background A key component of palliative care is support for family caregivers. Although some family caregivers identify positive aspects, the impact is typically burdensome; they are prone to physical and psychological morbidity, financial disadvantage and social isolation. Outcomes of systematic reviews have highlighted the importance of investment in family caregiver intervention research. Purpose To provide an overview of the development, evaluation and outcomes arising from of a programme of research (The Melbourne Family Support Program (FSP)), which focused on reducing the psychosocial burden of family caregivers. Methods Developmental work involved a systematic literature review; focus groups with family caregivers and health professionals; and identification of a conceptual framework. Following a pilot randomised controlled trial (RCT), a programme of psychoeducational intervention studies was developed and tested; one via RCT, the others via prepost test. Results Four psychoeducational interventions, incorporating one-to-one and group format delivery, conducted in both the home and inpatient hospital/hospice were evaluated. Statistically significant outcomes included improvements in family caregivers’ preparedness, competence, positive emotions, more favourable levels of psychological wellbeing and a reduction in unmet needs. Internationally endorsed guidelines for the psychosocial support of family caregivers were produced and several resources were constructed. Fifteen publications in international peer-reviewed journals have arisen from this programme. Conclusions The interventions and resources from the Melbourne FSP provide several evidenced-based and clinically relevant approaches that focus on reducing the psychosocial burden of the caregiving role. In several instances, however, more rigorous methodological testing is advocated. PMID:24644195

  13. Numerical Solution of Piecewise Constant Delay Systems Based on a Hybrid Framework

    Directory of Open Access Journals (Sweden)

    H. R. Marzban

    2016-01-01

    Full Text Available An efficient numerical scheme for solving delay differential equations with a piecewise constant delay function is developed in this paper. The proposed approach is based on a hybrid of block-pulse functions and Taylor’s polynomials. The operational matrix of delay corresponding to the proposed hybrid functions is introduced. The sparsity of this matrix significantly reduces the computation time and memory requirement. The operational matrices of integration, delay, and product are employed to transform the problem under consideration into a system of algebraic equations. It is shown that the developed approach is also applicable to a special class of nonlinear piecewise constant delay differential equations. Several numerical experiments are examined to verify the validity and applicability of the presented technique.

  14. Numerical tilting compensation in microscopy based on wavefront sensing using transport of intensity equation method

    Science.gov (United States)

    Hu, Junbao; Meng, Xin; Wei, Qi; Kong, Yan; Jiang, Zhilong; Xue, Liang; Liu, Fei; Liu, Cheng; Wang, Shouyu

    2018-03-01

    Wide-field microscopy is commonly used for sample observations in biological research and medical diagnosis. However, the tilting error induced by the oblique location of the image recorder or the sample, as well as the inclination of the optical path often deteriorates the imaging quality. In order to eliminate the tilting in microscopy, a numerical tilting compensation technique based on wavefront sensing using transport of intensity equation method is proposed in this paper. Both the provided numerical simulations and practical experiments prove that the proposed technique not only accurately determines the tilting angle with simple setup and procedures, but also compensates the tilting error for imaging quality improvement even in the large tilting cases. Considering its simple systems and operations, as well as image quality improvement capability, it is believed the proposed method can be applied for tilting compensation in the optical microscopy.

  15. A Numerical-Analytical Approach Based on Canonical Transformations for Computing Optimal Low-Thrust Transfers

    Science.gov (United States)

    da Silva Fernandes, S.; das Chagas Carvalho, F.; Bateli Romão, J. V.

    2018-04-01

    A numerical-analytical procedure based on infinitesimal canonical transformations is developed for computing optimal time-fixed low-thrust limited power transfers (no rendezvous) between coplanar orbits with small eccentricities in an inverse-square force field. The optimization problem is formulated as a Mayer problem with a set of non-singular orbital elements as state variables. Second order terms in eccentricity are considered in the development of the maximum Hamiltonian describing the optimal trajectories. The two-point boundary value problem of going from an initial orbit to a final orbit is solved by means of a two-stage Newton-Raphson algorithm which uses an infinitesimal canonical transformation. Numerical results are presented for some transfers between circular orbits with moderate radius ratio, including a preliminary analysis of Earth-Mars and Earth-Venus missions.

  16. An Effective Way to Control Numerical Instability of a Nonordinary State-Based Peridynamic Elastic Model

    Directory of Open Access Journals (Sweden)

    Xin Gu

    2017-01-01

    Full Text Available The constitutive modeling and numerical implementation of a nonordinary state-based peridynamic (NOSB-PD model corresponding to the classical elastic model are presented. Besides, the numerical instability problem of the NOSB-PD model is analyzed, and a penalty method involving the hourglass force is proposed to control the instabilities. Further, two benchmark problems, the static elastic deformation of a simple supported beam and the elastic wave propagation in a two-dimensional rod, are discussed with the present method. It proves that the penalty instability control method is effective in suppressing the displacement oscillations and improving the accuracy of calculated stress fields with a proper hourglass force coefficient, and the NOSB-PD approach with instability control can analyze the problems of structure deformation and elastic wave propagation well.

  17. Numerical simulation of terahertz generation and detection based on ultrafast photoconductive antennas

    Science.gov (United States)

    Chen, Long-chao; Fan, Wen-hui

    2011-08-01

    The numerical simulation of terahertz generation and detection in the interaction between femtosecond laser pulse and photoconductive material has been reported in this paper. The simulation model based on the Drude-Lorentz theory is used, and takes into account the phenomena that photo-generated electrons and holes are separated by the external bias field, which is screened by the space-charge field simultaneously. According to the numerical calculation, the terahertz time-domain waveforms and their Fourier-transformed spectra are presented under different conditions. The simulation results indicate that terahertz generation and detection properties of photoconductive antennas are largely influenced by three major factors, including photo-carriers' lifetime, laser pulse width and pump laser power. Finally, a simple model has been applied to simulate the detected terahertz pulses by photoconductive antennas with various photo-carriers' lifetimes, and the results show that the detected terahertz spectra are very different from the spectra radiated from the emitter.

  18. Applications of Kalman filters based on non-linear functions to numerical weather predictions

    Directory of Open Access Journals (Sweden)

    G. Galanis

    2006-10-01

    Full Text Available This paper investigates the use of non-linear functions in classical Kalman filter algorithms on the improvement of regional weather forecasts. The main aim is the implementation of non linear polynomial mappings in a usual linear Kalman filter in order to simulate better non linear problems in numerical weather prediction. In addition, the optimal order of the polynomials applied for such a filter is identified. This work is based on observations and corresponding numerical weather predictions of two meteorological parameters characterized by essential differences in their evolution in time, namely, air temperature and wind speed. It is shown that in both cases, a polynomial of low order is adequate for eliminating any systematic error, while higher order functions lead to instabilities in the filtered results having, at the same time, trivial contribution to the sensitivity of the filter. It is further demonstrated that the filter is independent of the time period and the geographic location of application.

  19. Applications of Kalman filters based on non-linear functions to numerical weather predictions

    Directory of Open Access Journals (Sweden)

    G. Galanis

    2006-10-01

    Full Text Available This paper investigates the use of non-linear functions in classical Kalman filter algorithms on the improvement of regional weather forecasts. The main aim is the implementation of non linear polynomial mappings in a usual linear Kalman filter in order to simulate better non linear problems in numerical weather prediction. In addition, the optimal order of the polynomials applied for such a filter is identified. This work is based on observations and corresponding numerical weather predictions of two meteorological parameters characterized by essential differences in their evolution in time, namely, air temperature and wind speed. It is shown that in both cases, a polynomial of low order is adequate for eliminating any systematic error, while higher order functions lead to instabilities in the filtered results having, at the same time, trivial contribution to the sensitivity of the filter. It is further demonstrated that the filter is independent of the time period and the geographic location of application.

  20. Developing group investigation-based book on numerical analysis to increase critical thinking student’s ability

    Science.gov (United States)

    Maharani, S.; Suprapto, E.

    2018-03-01

    Critical thinking is very important in Mathematics; it can make student more understanding mathematics concept. Critical thinking is also needed in numerical analysis. The Numerical analysis's book is not yet including critical thinking in them. This research aims to develop group investigation-based book on numerical analysis to increase critical thinking student’s ability, to know the quality of the group investigation-based book on numerical analysis is valid, practical, and effective. The research method is Research and Development (R&D) with the subject are 30 student college department of Mathematics education at Universitas PGRI Madiun. The development model used is 4-D modified to 3-D until the stage development. The type of data used is descriptive qualitative data. Instruments used are sheets of validation, test, and questionnaire. Development results indicate that group investigation-based book on numerical analysis in the category of valid a value 84.25%. Students response to the books very positive, so group investigation-based book on numerical analysis category practical, i.e., 86.00%. The use of group investigation-based book on numerical analysis has been meeting the completeness criteria classical learning that is 84.32 %. Based on research result of this study concluded that group investigation-based book on numerical analysis is feasible because it meets the criteria valid, practical, and effective. So, the book can be used by every mathematics academician. The next research can be observed that book based group investigation in other subjects.

  1. Evidence for shared susceptibility to epilepsy and psychosis: a population-based family study.

    LENUS (Irish Health Repository)

    Clarke, Mary C

    2012-05-01

    There is emerging evidence of an etiological overlap between a range of neurodevelopmental disorders, including schizophrenia and epilepsy. Here we investigate shared familial vulnerability to psychotic illness and epilepsy in a family-based study.

  2. Numerical Calabi-Yau metrics

    International Nuclear Information System (INIS)

    Douglas, Michael R.; Karp, Robert L.; Lukic, Sergio; Reinbacher, Rene

    2008-01-01

    We develop numerical methods for approximating Ricci flat metrics on Calabi-Yau hypersurfaces in projective spaces. Our approach is based on finding balanced metrics and builds on recent theoretical work by Donaldson. We illustrate our methods in detail for a one parameter family of quintics. We also suggest several ways to extend our results

  3. Family-based clusters of cognitive test performance in familial schizophrenia

    Directory of Open Access Journals (Sweden)

    Partonen Timo

    2004-07-01

    Full Text Available Abstract Background Cognitive traits derived from neuropsychological test data are considered to be potential endophenotypes of schizophrenia. Previously, these traits have been found to form a valid basis for clustering samples of schizophrenia patients into homogeneous subgroups. We set out to identify such clusters, but apart from previous studies, we included both schizophrenia patients and family members into the cluster analysis. The aim of the study was to detect family clusters with similar cognitive test performance. Methods Test scores from 54 randomly selected families comprising at least two siblings with schizophrenia spectrum disorders, and at least two unaffected family members were included in a complete-linkage cluster analysis with interactive data visualization. Results A well-performing, an impaired, and an intermediate family cluster emerged from the analysis. While the neuropsychological test scores differed significantly between the clusters, only minor differences were observed in the clinical variables. Conclusions The visually aided clustering algorithm was successful in identifying family clusters comprising both schizophrenia patients and their relatives. The present classification method may serve as a basis for selecting phenotypically more homogeneous groups of families in subsequent genetic analyses.

  4. Numerical simulation of nanofluids based on power-law fluids with flow and heat transfer

    Science.gov (United States)

    Li, Lin; Jiang, Yongyue; Chen, Aixin

    2017-04-01

    In this paper, we investigate the heat transfer of nanofluids based on power-law fluids and movement of nanoparticles with the effect of thermophoresis in a rotating circular groove. The velocity of circular groove rotating is a constant and the temperature on the wall is kept to be zero all the time which is different from the temperature of nanofluids in the initial time. The effects of thermophoresis and Brownian diffusion are considered in temperature and concentration equations, and it is assumed that the thermal conductivity of nanofluids is a function of concentration of nanoparticles. Based on numerical results, it can be found that nanofluids improve the process of heat transfer than base fluids in a rotating circular groove. The enhancement of heat transfer increases as the power law index of base fluids decreases.

  5. Optical asymmetric cryptography based on elliptical polarized light linear truncation and a numerical reconstruction technique.

    Science.gov (United States)

    Lin, Chao; Shen, Xueju; Wang, Zhisong; Zhao, Cheng

    2014-06-20

    We demonstrate a novel optical asymmetric cryptosystem based on the principle of elliptical polarized light linear truncation and a numerical reconstruction technique. The device of an array of linear polarizers is introduced to achieve linear truncation on the spatially resolved elliptical polarization distribution during image encryption. This encoding process can be characterized as confusion-based optical cryptography that involves no Fourier lens and diffusion operation. Based on the Jones matrix formalism, the intensity transmittance for this truncation is deduced to perform elliptical polarized light reconstruction based on two intensity measurements. Use of a quick response code makes the proposed cryptosystem practical, with versatile key sensitivity and fault tolerance. Both simulation and preliminary experimental results that support theoretical analysis are presented. An analysis of the resistance of the proposed method on a known public key attack is also provided.

  6. Extremum-Seeking Control and Applications A Numerical Optimization-Based Approach

    CERN Document Server

    Zhang, Chunlei

    2012-01-01

    Extremum seeking control tracks a varying maximum or minimum in a performance function such as a cost. It attempts to determine the optimal performance of a control system as it operates, thereby reducing downtime and the need for system analysis. Extremum Seeking Control and Applications is divided into two parts. In the first, the authors review existing analog optimization based extremum seeking control including gradient, perturbation and sliding mode based control designs. They then propose a novel numerical optimization based extremum seeking control based on optimization algorithms and state regulation. This control design is developed for simple linear time-invariant systems and then extended for a class of feedback linearizable nonlinear systems. The two main optimization algorithms – line search and trust region methods – are analyzed for robustness. Finite-time and asymptotic state regulators are put forward for linear and nonlinear systems respectively. Further design flexibility is achieved u...

  7. The numerical evaluation on non-radiative multiphonon transition rate from different electronic bases

    International Nuclear Information System (INIS)

    Zhu Bangfen.

    1985-10-01

    A numerical calculation on the non-radiative multiphonon transition probability based on the adiabatic approximation (AA) and the static approximation (SA) has been accomplished in a model of two electronic levels coupled to one phonon mode. The numerical results indicate that the spectra based on different approximations are generally different apart from those vibrational levels which are far below the classical crossing point. For large electron-phonon coupling constant, the calculated transition rates based on AA are more reliable; on the other hand, for small transition coupling the transition rates near or beyond the cross region are quite different for two approximations. In addition to the diagonal non-adiabatic potential, the mixing and splitting of the original static potential sheets are responsible for the deviation of the transition rates based on different approximations. The relationship between the transition matrix element and the vibrational level shift, the Huang-Rhys factor, the separation of the electronic levels and the electron-phonon coupling is analysed and discussed. (author)

  8. The numerical computation of seismic fragility of base-isolated Nuclear Power Plants buildings

    International Nuclear Information System (INIS)

    Perotti, Federico; Domaneschi, Marco; De Grandis, Silvia

    2013-01-01

    Highlights: • Seismic fragility of structural components in base isolated NPP is computed. • Dynamic integration, Response Surface, FORM and Monte Carlo Simulation are adopted. • Refined approach for modeling the non-linearities behavior of isolators is proposed. • Beyond-design conditions are addressed. • The preliminary design of the isolated IRIS is the application of the procedure. -- Abstract: The research work here described is devoted to the development of a numerical procedure for the computation of seismic fragilities for equipment and structural components in Nuclear Power Plants; in particular, reference is made, in the present paper, to the case of isolated buildings. The proposed procedure for fragility computation makes use of the Response Surface Methodology to model the influence of the random variables on the dynamic response. To account for stochastic loading, the latter is computed by means of a simulation procedure. Given the Response Surface, the Monte Carlo method is used to compute the failure probability. The procedure is here applied to the preliminary design of the Nuclear Power Plant reactor building within the International Reactor Innovative and Secure international project; the building is equipped with a base isolation system based on the introduction of High Damping Rubber Bearing elements showing a markedly non linear mechanical behavior. The fragility analysis is performed assuming that the isolation devices become the critical elements in terms of seismic risk and that, once base-isolation is introduced, the dynamic behavior of the building can be captured by low-dimensional numerical models

  9. BULLYING BEHAVIOUR OF ADOLESCENTS BASED ON GENDER, GANG AND FAMILY

    Directory of Open Access Journals (Sweden)

    Kadek Ayu Erika

    2017-06-01

    Full Text Available Introduction: Bullying is a social problem which is part of aggressive violent behaviour done continuously and have negative impact to victims and its subject and happened at school. This study aimed to know the description of knowledge and adolescents behavior about bullying based on their age, gang, and family. Methods: This study used analytic descriptive design with number of sample was 246 adolescents from grade 1, 2, 3 of senior high school which used stratified random sampling. Instruments of this study were knowledge questioner, and modified of The Bullying Prevalence Questionnaire in guttman and likert scale. Data analysis used cross tabulation. Result: Data show that adolescents have a good knowledge (93.9% and less (6.1%. Bullying subjects were 93.9% and victims 94.7%. Forms of verbal bullying indicated the subjects (93.1% and victims (92.3%. Bullying subjects majority occurred in males (94.1% and women become victims (96.3%. Numbers of bullying subjects do not have a gang (94.5%, while those with gang as victims (95.2%. There were five adolescents who live in stepfamilies become subjects and victims of bullying. Conclusion: The majority of adolescents have good knowledge about bullying, bullying form the vast majority were verbal bullying with subjects and victims of bullying who occurs in all classes. The majority of bullying subjects do not have a gang, and as the majority of victims have a gang. Almost all adolescents with different family types become subjects and victims of bullying. Therefore, an intensive educational effort and spiritual needs to be done to change the behavior of adolescents to be adolescents with well character.

  10. The Behaviour of Fracture Growth in Sedimentary Rocks: A Numerical Study Based on Hydraulic Fracturing Processes

    Directory of Open Access Journals (Sweden)

    Lianchong Li

    2016-03-01

    Full Text Available To capture the hydraulic fractures in heterogeneous and layered rocks, a numerical code that can consider the coupled effects of fluid flow, damage, and stress field in rocks is presented. Based on the characteristics of a typical thin and inter-bedded sedimentary reservoir, China, a series of simulations on the hydraulic fracturing are performed. In the simulations, three points, i.e., (1 confining stresses, representing the effect of in situ stresses, (2 strength of the interfaces, and (3 material properties of the layers on either side of the interface, are crucial in fracturing across interfaces between two adjacent rock layers. Numerical results show that the hydrofracture propagation within a layered sequence of sedimentary rocks is controlled by changing in situ stresses, interface properties, and lithologies. The path of the hydraulic fracture is characterized by numerous deflections, branchings, and terminations. Four types of potential interaction, i.e., penetration, arrest, T-shaped branching, and offset, between a hydrofracture and an interface within the layered rocks are formed. Discontinuous composite fracture segments resulting from out-of-plane growth of fractures provide a less permeable path for fluids, gas, and oil than a continuous planar composite fracture, which are one of the sources of the high treating pressures and reduced fracture volume.

  11. A numerical homogenization method for heterogeneous, anisotropic elastic media based on multiscale theory

    KAUST Repository

    Gao, Kai

    2015-06-05

    The development of reliable methods for upscaling fine-scale models of elastic media has long been an important topic for rock physics and applied seismology. Several effective medium theories have been developed to provide elastic parameters for materials such as finely layered media or randomly oriented or aligned fractures. In such cases, the analytic solutions for upscaled properties can be used for accurate prediction of wave propagation. However, such theories cannot be applied directly to homogenize elastic media with more complex, arbitrary spatial heterogeneity. Therefore, we have proposed a numerical homogenization algorithm based on multiscale finite-element methods for simulating elastic wave propagation in heterogeneous, anisotropic elastic media. Specifically, our method used multiscale basis functions obtained from a local linear elasticity problem with appropriately defined boundary conditions. Homogenized, effective medium parameters were then computed using these basis functions, and the approach applied a numerical discretization that was similar to the rotated staggered-grid finite-difference scheme. Comparisons of the results from our method and from conventional, analytical approaches for finely layered media showed that the homogenization reliably estimated elastic parameters for this simple geometry. Additional tests examined anisotropic models with arbitrary spatial heterogeneity in which the average size of the heterogeneities ranged from several centimeters to several meters, and the ratio between the dominant wavelength and the average size of the arbitrary heterogeneities ranged from 10 to 100. Comparisons to finite-difference simulations proved that the numerical homogenization was equally accurate for these complex cases.

  12. Ground-based PIV and numerical flow visualization results from the Surface Tension Driven Convection Experiment

    Science.gov (United States)

    Pline, Alexander D.; Werner, Mark P.; Hsieh, Kwang-Chung

    1991-01-01

    The Surface Tension Driven Convection Experiment (STDCE) is a Space Transportation System flight experiment to study both transient and steady thermocapillary fluid flows aboard the United States Microgravity Laboratory-1 (USML-1) Spacelab mission planned for June, 1992. One of the components of data collected during the experiment is a video record of the flow field. This qualitative data is then quantified using an all electric, two dimensional Particle Image Velocimetry (PIV) technique called Particle Displacement Tracking (PDT), which uses a simple space domain particle tracking algorithm. Results using the ground based STDCE hardware, with a radiant flux heating mode, and the PDT system are compared to numerical solutions obtained by solving the axisymmetric Navier Stokes equations with a deformable free surface. The PDT technique is successful in producing a velocity vector field and corresponding stream function from the raw video data which satisfactorily represents the physical flow. A numerical program is used to compute the velocity field and corresponding stream function under identical conditions. Both the PDT system and numerical results were compared to a streak photograph, used as a benchmark, with good correlation.

  13. Numerical Simulation of the Interaction between Phosphorus and Sediment Based on the Modified Langmuir Equation

    Directory of Open Access Journals (Sweden)

    Pengjie Hu

    2018-06-01

    Full Text Available Phosphorus is the primary factor that limits eutrophication of surface waters in aquatic environments. Sediment particles have a strong affinity to phosphorus due to the high specific surface areas and surface active sites. In this paper, a numerical model containing hydrodynamics, sediment, and phosphorus module based on improved Langmuir equation is established, where the processes of adsorption and desorption are considered. Through the statistical analysis of the physical experiment data, the fitting formulas of two important parameters in the Langmuir equation are obtained, which are the adsorption coefficient, ka, and the ratio k between the adsorption coefficient and the desorption coefficient. In order to simulate the experimental flume and get a constant and uniform water flow, a periodical numerical flume is built by adding a streamwise body force, Fx. The adsorbed phosphorus by sediment and the dissolved phosphorus in the water are separately added into the Advection Diffusion equation as a source term to simulate the interaction between them. The result of the numerical model turns out to be well matched with that of the physical experiment and can thus provide the basis for further analysis. With the application of the numerical model to some new and relative cases, the conclusion will be drawn through an afterwards analysis. The concentration of dissolved phosphorus proves to be unevenly distributed along the depth and the maximum value approximately appears in the 3/4 water depth because both the high velocity in the top layer and the high turbulence intensity in the bottom layer can promote sediment adsorption on phosphorus.

  14. A Community-Based Intervention Program to Enhance Family Communication and Family Well-being: The Learning Families Project in Hong Kong

    Directory of Open Access Journals (Sweden)

    Chen Shen

    2017-09-01

    Full Text Available BackgroundFamily communication is important to maintain family relationships and family well-being. To enhance family communication and family well-being, a community-based “Learning Families Project,” based on the social ecological model was developed in Kwun Tong in Hong Kong, a district with high prevalence of family problems.MethodsThis quasi-experimental study included two nearby government subsidized low-rent housing estates separated by busy main roads, as the intervention [Tsui Ping (South Estate] and control (Shun Tin Estate estate. The main intervention was resident training programs, such as talks, day camps, and thematic activities. No program was implemented in the control estate. Participants in the intervention group received assessments before the intervention (T1, immediately after the intervention (T2, and 6 weeks after the intervention (T3. Control group participants were assessed at baseline (March to April 2011 and follow-up (December 2011 to March 2012. Assessments of family communication (time and perceived adequacy and family well-being (harmony, happiness, and health at T1 and T3 were obtained in the intervention group to examine within-group changes. In addition, these differences in outcomes in the intervention group were compared with those in the control group to examine the effectiveness of the intervention.ResultsFamily communication time and perceived communication adequacy increased significantly in the intervention group (n = 515 with a small effect size (Cohen effect d: 0.10 and 0.24, respectively. Compared with the control group (n = 476, the improvements in family communication time and perceived communication adequacy (Cohen effect d: 0.13 and 0.14, respectively, and perceived family harmony and happiness (Cohen effect d: 0.12 and 0.12, respectively were significantly greater in the intervention group, adjusting for age and education, suggesting the intervention was effective in improving

  15. Nutrient-based dietary patterns, family history, and colorectal cancer.

    Science.gov (United States)

    Turati, Federica; Edefonti, Valeria; Bravi, Francesca; Ferraroni, Monica; Franceschi, Silvia; La Vecchia, Carlo; Montella, Maurizio; Talamini, Renato; Decarli, Adriano

    2011-11-01

    The effect of dietary habits on colorectal cancer (CRC) risk may be modified by a family history of CRC. We analyzed data from an Italian case-control study, including 1953 CRC cases and 4154 controls. Odds ratios (OR) and 95% confidence intervals (CI) for combined categories of family history and tertiles of two a posteriori dietary patterns were derived using multiple logistic regression models. Compared with individuals without family history and in the lowest tertile category of the 'starch-rich' pattern, the ORs of CRC were 1.38 (95% CI: 1.19-1.61) for the group without family history and in the highest tertile, 2.89 (95% CI: 2.30-3.64) for the one with family history and in the lowest tertile, and 4.00 (95% CI: 3.03-5.27) for the one with family history and in the highest tertile. Compared with individuals without family history and in the highest tertile of the 'vitamins and fiber' pattern, the ORs were 1.29 (95% CI: 1.12-1.48) for the group without family history and in the lowest tertile, 2.89 (95% CI: 2.30-3.64) for the one with family history and in the highest tertile, and 3.74 (95% CI: 2.85-4.91) for the one with family history and in the lowest tertile. Family history of CRC and 'starch-rich' or 'vitamins and fiber' patterns has an independent effect on CRC risk in our population. However, as having a family history plausibly implies shared environmental and/or genetic risk factors, our results could not exclude that dietary habits can modify genetic susceptibility to CRC.

  16. Free Software Development. 3. Numerical Description of Soft Acid with Soft Base Titration

    OpenAIRE

    Lorentz JÄNTSCHI; Horea Iustin NAŞCU

    2002-01-01

    The analytical methods of qualitative and quantitative determination of ions in solutions are very flexible to automation. The present work is focus on modeling the process of titration and presents a numerical simulation of acid-base titration. A PHP program to compute all iterations in titration process that solves a 3th rank equation to find value of pH for was built and is available through http internet protocol at the address: http://vl.academicdirect.org/molecular_dynamics/ab_titra...

  17. Numerical simulation and impact assessment of a groundwater pollution based on MODFLOW

    International Nuclear Information System (INIS)

    Liu Dongxu; Si Gaohua; Zheng Junfang; Yu Jing; Liu Yong; Chen Jianjie; Ma Jinzhu

    2013-01-01

    Based on MODFLOW, SRTM3 DEM data and GIS tool, a saturated-zone groundwater flow and radionuclide transport numerical model in a research area had been developed to evaluate the migration trend and environmental impact. The results showed that 3 H transporting with the groundwater had a fast velocity and a pulse concentration which can not reduce to acceptable level within short times. that may cause groundwater pollution in downstream region. However, 90 Sr was transported slowly with the groundwater, and may only cause a pollution area of about 200 m around the source. (authors)

  18. Numerical methods and inversion algorithms in reservoir simulation based on front tracking

    Energy Technology Data Exchange (ETDEWEB)

    Haugse, Vidar

    1999-04-01

    This thesis uses front tracking to analyse laboratory experiments on multiphase flow in porous media. New methods for parameter estimation for two- and three-phase relative permeability experiments have been developed. Up scaling of heterogeneous and stochastic porous media is analysed. Numerical methods based on front tracking is developed and analysed. Such methods are efficient for problems involving steep changes in the physical quantities. Multi-dimensional problems are solved by combining front tracking with dimensional splitting. A method for adaptive grid refinement is developed.

  19. Response of multiferroic composites inferred from a fast-Fourier-transform-based numerical scheme

    International Nuclear Information System (INIS)

    Brenner, Renald; Bravo-Castillero, Julián

    2010-01-01

    The effective response and the local fields within periodic magneto-electric multiferroic composites are investigated by means of a numerical scheme based on fast Fourier transforms. This computational framework relies on the iterative resolution of coupled series expansions for the magnetic, electric and strain fields. By using an augmented Lagrangian formulation, a simple and robust procedure which makes use of the uncoupled Green operators for the elastic, electrostatics and magnetostatics problems is proposed. Its accuracy is assessed in the cases of laminated and fibrous two-phase composites for which analytical solutions exist

  20. Research on numerical control system based on S3C2410 and MCX314AL

    Science.gov (United States)

    Ren, Qiang; Jiang, Tingbiao

    2008-10-01

    With the rapid development of micro-computer technology, embedded system, CNC technology and integrated circuits, numerical control system with powerful functions can be realized by several high-speed CPU chips and RISC (Reduced Instruction Set Computing) chips which have small size and strong stability. In addition, the real-time operating system also makes the attainment of embedded system possible. Developing the NC system based on embedded technology can overcome some shortcomings of common PC-based CNC system, such as the waste of resources, low control precision, low frequency and low integration. This paper discusses a hardware platform of ENC (Embedded Numerical Control) system based on embedded processor chip ARM (Advanced RISC Machines)-S3C2410 and DSP (Digital Signal Processor)-MCX314AL and introduces the process of developing ENC system software. Finally write the MCX314AL's driver under the embedded Linux operating system. The embedded Linux operating system can deal with multitask well moreover satisfy the real-time and reliability of movement control. NC system has the advantages of best using resources and compact system with embedded technology. It provides a wealth of functions and superior performance with a lower cost. It can be sure that ENC is the direction of the future development.

  1. Numerical model of the influence function of deformable mirrors based on Bessel Fourier orthogonal functions

    International Nuclear Information System (INIS)

    Li Shun; Zhang Sijiong

    2014-01-01

    A numerical model is presented to simulate the influence function of deformable mirror actuators. The numerical model is formed by Bessel Fourier orthogonal functions, which are constituted of Bessel orthogonal functions and a Fourier basis. A detailed comparison is presented between the new Bessel Fourier model, the Zernike model, the Gaussian influence function and the modified Gaussian influence function. Numerical experiments indicate that the new numerical model is easy to use and more accurate compared with other numerical models. The new numerical model can be used for describing deformable mirror performances and numerical simulations of adaptive optics systems. (research papers)

  2. Ecologically Based Family Therapy Outcome with Substance Abusing Runaway Adolescents

    Science.gov (United States)

    Slesnick, N.; Prestopnik, J.L.

    2005-01-01

    Runaway youth report a broader range and higher severity of substance-related, mental health and family problems relative to non-runaway youth. Most studies to date have collected self-report data on the family and social history; virtually no research has examined treatment effectiveness with this population. This study is a treatment development…

  3. A Dynamic Operation Permission Technique Based on an MFM Model and Numerical Simulation

    International Nuclear Information System (INIS)

    Akio, Gofuku; Masahiro, Yonemura

    2011-01-01

    It is important to support operator activities to an abnormal plant situation where many counter actions are taken in relatively short time. The authors proposed a technique called dynamic operation permission to decrease human errors without eliminating creative idea of operators to cope with an abnormal plant situation by checking if the counter action taken is consistent with emergency operation procedure. If the counter action is inconsistent, a dynamic operation permission system warns it to operators. It also explains how and why the counter action is inconsistent and what influence will appear on the future plant behavior by a qualitative influence inference technique based on a model by the Mf (Multilevel Flow Modeling). However, the previous dynamic operation permission is not able to explain quantitative effects on plant future behavior. Moreover, many possible influence paths are derived because a qualitative reasoning does not give a solution when positive and negative influences are propagated to the same node. This study extends the dynamic operation permission by combining the qualitative reasoning and the numerical simulation technique. The qualitative reasoning based on an Mf model of plant derives all possible influence propagation paths. Then, a numerical simulation gives a prediction of plant future behavior in the case of taking a counter action. The influence propagation that does not coincide with the simulation results is excluded from possible influence paths. The extended technique is implemented in a dynamic operation permission system for an oil refinery plant. An MFM model and a static numerical simulator are developed. The results of dynamic operation permission for some abnormal plant situations show the improvement of the accuracy of dynamic operation permission and the quality of explanation for the effects of the counter action taken

  4. Numerical analysis of liquid metal MHD flows through circular pipes based on a fully developed modeling

    International Nuclear Information System (INIS)

    Zhang, Xiujie; Pan, Chuanjie; Xu, Zengyu

    2013-01-01

    Highlights: ► 2D MHD code based on a fully developed modeling is developed and validated by Samad analytical results. ► The results of MHD effect of liquid metal through circular pipes at high Hartmann numbers are given. ► M type velocity profile is observed for MHD circular pipe flow at high wall conductance ratio condition. ► Non-uniform wall electrical conductivity leads to high jet velocity in Robert layers. -- Abstract: Magnetohydrodynamics (MHD) laminar flows through circular pipes are studied in this paper by numerical simulation under the conditions of Hartmann numbers from 18 to 10000. The code is developed based on a fully developed modeling and validated by Samad's analytical solution and Chang's asymptotic results. After the code validation, numerical simulation is extended to high Hartmann number for MHD circular pipe flows with conducting walls, and numerical results such as velocity distribution and MHD pressure gradient are obtained. Typical M-type velocity is observed but there is not such a big velocity jet as that of MHD rectangular duct flows even under the conditions of high Hartmann numbers and big wall conductance ratio. The over speed region in Robert layers becomes smaller when Hartmann numbers increase. When Hartmann number is fixed and wall conductance ratios change, the dimensionless velocity is through one point which is in agreement with Samad's results, the locus of maximum value of velocity jet is same and effects of wall conductance ratio only on the maximum value of velocity jet. In case of Robert walls are treated as insulating and Hartmann walls as conducting for circular pipe MHD flows, there is big velocity jet like as MHD rectangular duct flows of Hunt's case 2

  5. Numerical study of base pressure characteristic curve for a four-engine clustered nozzle configuration

    Science.gov (United States)

    Wang, Ten-See

    1993-07-01

    Excessive base heating has been a problem for many launch vehicles. For certain designs such as the direct dump of turbine exhaust in the nozzle section and at the nozzle lip of the Space Transportation Systems Engine (STME), the potential burning of the turbine exhaust in the base region has caused tremendous concern. Two conventional approaches have been considered for predicting the base environment: (1) empirical approach, and (2) experimental approach. The empirical approach uses a combination of data correlations and semi-theoretical calculations. It works best for linear problems, simple physics and geometry. However, it is highly suspicious when complex geometry and flow physics are involved, especially when the subject is out of historical database. The experimental approach is often used to establish database for engineering analysis. However, it is qualitative at best for base flow problems. Other criticisms include the inability to simulate forebody boundary layer correctly, the interference effect from tunnel walls, and the inability to scale all pertinent parameters. Furthermore, there is a contention that the information extrapolated from subscale tests with combustion is not conservative. One potential alternative to the conventional methods is computational fluid dynamics (CFD), which has none of the above restrictions and is becoming more feasible due to maturing algorithms and advancing computer technology. It provides more details of the flowfield and is only limited by computer resources. However, it has its share of criticisms as a predictive tool for base environment. One major concern is that CFD has not been extensively tested for base flow problems. It is therefore imperative that CFD be assessed and benchmarked satisfactorily for base flows. In this study, the turbulent base flowfield of a experimental investigation for a four-engine clustered nozzle is numerically benchmarked using a pressure based CFD method. Since the cold air was the

  6. Thermal transport in phosphorene and phosphorene-based materials: A review on numerical studies

    Science.gov (United States)

    Hong, Yang; Zhang, Jingchao; Zeng, Xiao Cheng

    2018-03-01

    The recently discovered two-dimensional (2D) layered material phosphorene has attracted considerable interest as a promising p-type semiconducting material. In this article, we review the recent advances in numerical studies of the thermal properties of monolayer phosphorene and phosphorene-based heterostructures. We first briefly review the commonly used first-principles and molecular dynamics (MD) approaches to evaluate the thermal conductivity and interfacial thermal resistance of 2D phosphorene. Principles of different steady-state and transient MD techniques have been elaborated on in detail. Next, we discuss the anisotropic thermal transport of phosphorene in zigzag and armchair chiral directions. Subsequently, the in-plane and cross-plane thermal transport in phosphorene-based heterostructures such as phosphorene/silicon and phosphorene/graphene is summarized. Finally, the numerical research in the field of thermal transport in 2D phosphorene is highlighted along with our perspective of potentials and opportunities of 2D phosphorenes in electronic applications such as photodetectors, field-effect transistors, lithium ion batteries, sodium ion batteries, and thermoelectric devices.

  7. A Numerical Study of Aerodynamic Performance and Noise of a Bionic Airfoil Based on Owl Wing

    Directory of Open Access Journals (Sweden)

    Xiaomin Liu

    2014-08-01

    Full Text Available Noise reduction and efficiency enhancement are the two important directions in the development of the multiblade centrifugal fan. In this study, we attempt to develop a bionic airfoil based on the owl wing and investigate its aerodynamic performance and noise-reduction mechanism at the relatively low Reynolds number. Firstly, according to the geometric characteristics of the owl wing, a bionic airfoil is constructed as the object of study at Reynolds number of 12,300. Secondly, the large eddy simulation (LES with the Smagorinsky model is adopted to numerically simulate the unsteady flow fields around the bionic airfoil and the standard NACA0006 airfoil. And then, the acoustic sources are extracted from the unsteady flow field data, and the Ffowcs Williams-Hawkings (FW-H equation based on Lighthill's acoustic theory is solved to predict the propagation of these acoustic sources. The numerical results show that the lift-to-drag ratio of bionic airfoil is higher than that of the traditional NACA 0006 airfoil because of its deeply concave lower surface geometry. Finally, the sound field of the bionic airfoil is analyzed in detail. The distribution of the A-weighted sound pressure levels, the scaled directivity of the sound, and the distribution of dP/dt on the airfoil surface are provided so that the characteristics of the acoustic sources could be revealed.

  8. Theoretical and numerical studies on the transport of transverse beam quality in plasma-based accelerators

    International Nuclear Information System (INIS)

    Mehrling, Timon Johannes

    2014-11-01

    This work examines effects, which impact the transverse quality of electron-beams in plasma-based accelerators, by means of theoretical and numerical methods. Plasma-based acceleration is a promising candidate for future particle accelerator technologies. In plasma-based acceleration, highly intense laser beams or high-current relativistic particle beams are focused into a plasma to excite plasma-waves with extreme transverse and longitudinal electric fields. The amplitude of these fields exceed with 10-100 GV/m the ones in today's radio-frequency accelerators by several orders of magnitude, hence, in principle allowing for accordingly shorter and cheaper accelerators based on plasma. Despite the tremendous progress in the recent decade, beams from plasma accelerators are not yet achieving the quality as demanded for pivotal applications of relativistic electron-beams, e.g. free-electron lasers (FELs).Studies within this work examine how the quality can be optimized in the production of the beams and preserved during the acceleration and transport to the interaction region. Such studies cannot be approached purely analytical but necessitate numerical methods, such as the Particle-In-Cell (PIC) method, which can model kinetic, electrodynamic and relativistic plasma phenomena. However, this method is computationally too expensive for parameter-scans in three-dimensional geometries. Hence, a quasi-static PIC code was developed in connection with this work, which is significantly more effective than the full PIC method for a class of problems in plasma-based acceleration.The evolution of the emittance of beams which are injected into plasma modules was studied in this work by means of theoretical and the above numerical methods. It was shown that the beam parameters need to be matched accurately into the focusing plasma-channel in order to allow for beam-quality preservation. This suggested that new extraction and injection-techniques are required in staged plasma

  9. Work-based assessment within Malta’s specialist training programme in family medicine

    OpenAIRE

    Sammut, Mario R.; Abela, Gunther

    2014-01-01

    The Specialist Training Programme in Family Medicine (STPFM) – Malta was drawn up by the Malta College of Family Doctors in 2006, approved by Malta’s Specialist Accreditation Committee, and launched in 2007 by the Primary Health Care Department and the Malta College of Family Doctors. This article regarding the work-based assessment of specialist training in family medicine in Malta was prepared by consulting various local / international documents and publications tha...

  10. CONTROL BASED ON NUMERICAL METHODS AND RECURSIVE BAYESIAN ESTIMATION IN A CONTINUOUS ALCOHOLIC FERMENTATION PROCESS

    Directory of Open Access Journals (Sweden)

    Olga L. Quintero

    Full Text Available Biotechnological processes represent a challenge in the control field, due to their high nonlinearity. In particular, continuous alcoholic fermentation from Zymomonas mobilis (Z.m presents a significant challenge. This bioprocess has high ethanol performance, but it exhibits an oscillatory behavior in process variables due to the influence of inhibition dynamics (rate of ethanol concentration over biomass, substrate, and product concentrations. In this work a new solution for control of biotechnological variables in the fermentation process is proposed, based on numerical methods and linear algebra. In addition, an improvement to a previously reported state estimator, based on particle filtering techniques, is used in the control loop. The feasibility estimator and its performance are demonstrated in the proposed control loop. This methodology makes it possible to develop a controller design through the use of dynamic analysis with a tested biomass estimator in Z.m and without the use of complex calculations.

  11. Numerical simulation of base flow of a long range flight vehicle

    Science.gov (United States)

    Saha, S.; Rathod, S.; Chandra Murty, M. S. R.; Sinha, P. K.; Chakraborty, Debasis

    2012-05-01

    Numerical exploration of base flow of a long range flight vehicle is presented for different flight conditions. Three dimensional Navier-Stokes equations are solved along with k-ɛ turbulence model using commercial CFD software. Simulation captured all essential flow features including flow separation at base shoulder, shear layer formation at the jet boundary, recirculation at the base region etc. With the increase in altitude, the plume of the rocket exhaust is seen to bulge more and more and caused more intense free stream and rocket plume interaction leading to higher gas temperature in the base cavity. The flow field in the base cavity is investigated in more detail, which is found to be fairly uniform at different instant of time. Presence of the heat shield is seen to reduce the hot gas entry to the cavity region due to different recirculation pattern in the base region. Computed temperature history obtained from conjugate heat transfer analysis is found to compare very well with flight measured data.

  12. A numerical method for PCM-based pin fin heat sinks optimization

    International Nuclear Information System (INIS)

    Pakrouh, R.; Hosseini, M.J.; Ranjbar, A.A.; Bahrampoury, R.

    2015-01-01

    Highlights: • Optimization of PCM-based heat sink by using the Taguchi method. • Derivation of optimal PCM percentage to reach the maximum critical time. • Optimization is performed for four different critical temperatures. • Effective design factors are fins’ height and fins’ number. • The optimum configuration depends on geometric properties and the critical temperature. - Abstract: This paper presents a numerical investigation on geometric optimization of PCM-based pin fin heat sinks. Paraffin RT44HC is used as PCM while the fins and heat sink base is made of aluminum. The fins act as thermal conductivity enhancers (TCEs). The main goal of the study is to obtain the configurations that maximize the heat sink operational time. An approach witch couples Taguchi method with numerical simulations is utilized for this purpose. Number of fins, fins height, fins thickness and the base thickness are parameters which are studied for optimization. In this study natural convection and PCM volume variation during melting process are considered in the simulations. Optimization is performed for different critical temperatures of 50 °C, 60 °C, 70 °C and 80 °C. Results show that a complex relation exists between PCM and TCE volume percentages. The optimal case strongly depends on the fins’ number, fins’ height and thickness and also the critical temperature. The optimum PCM percentages are found to be 60.61% (corresponds to 100 pin fin heat sink with 4 mm thick fins) for critical temperature of 50 °C and 82.65% (corresponds to 100 pin fin heat sink with 2 mm thick fins) for other critical temperatures

  13. The Melbourne Family Support Program: evidence-based strategies that prepare family caregivers for supporting palliative care patients.

    Science.gov (United States)

    Hudson, Peter; Aranda, Sanchia

    2014-09-01

    A key component of palliative care is support for family caregivers. Although some family caregivers identify positive aspects, the impact is typically burdensome; they are prone to physical and psychological morbidity, financial disadvantage and social isolation. Outcomes of systematic reviews have highlighted the importance of investment in family caregiver intervention research. To provide an overview of the development, evaluation and outcomes arising from of a programme of research (The Melbourne Family Support Program (FSP)), which focused on reducing the psychosocial burden of family caregivers. Developmental work involved a systematic literature review; focus groups with family caregivers and health professionals; and identification of a conceptual framework. Following a pilot randomised controlled trial (RCT), a programme of psychoeducational intervention studies was developed and tested; one via RCT, the others via prepost test. Four psychoeducational interventions, incorporating one-to-one and group format delivery, conducted in both the home and inpatient hospital/hospice were evaluated. Statistically significant outcomes included improvements in family caregivers' preparedness, competence, positive emotions, more favourable levels of psychological wellbeing and a reduction in unmet needs. Internationally endorsed guidelines for the psychosocial support of family caregivers were produced and several resources were constructed. Fifteen publications in international peer-reviewed journals have arisen from this programme. The interventions and resources from the Melbourne FSP provide several evidenced-based and clinically relevant approaches that focus on reducing the psychosocial burden of the caregiving role. In several instances, however, more rigorous methodological testing is advocated. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  14. Generalized model for Memristor-based Wien family oscillators

    KAUST Repository

    Talukdar, Abdul Hafiz Ibne; Radwan, Ahmed G.; Salama, Khaled N.

    2012-01-01

    In this paper, we report the unconventional characteristics of Memristor in Wien oscillators. Generalized mathematical models are developed to analyze four members of the Wien family using Memristors. Sustained oscillation is reported for all types

  15. Numerical Simulation for Mechanical Behavior of Asphalt Pavement with Graded Aggregate Base

    Directory of Open Access Journals (Sweden)

    Dongliang He

    2018-01-01

    Full Text Available The performance of asphalt pavement is determined by the combination of its material properties, road structure, and loading configurations. A DEM numerical simulation study was conducted to determine stress distribution and deformation behavior of asphalt pavement with graded aggregate base under standard traffic loading. Stress contour and displacement contour were presented via a self-made program. Compressive stress concentrated area located in both sides of wheel, while tensile stress concentrated area appeared in lower part of the asphalt layer. The traffic loading transferred downward by graded aggregate base and to both sides at the same time, and has a trend to expand gradually with increasing depth within graded aggregate base. Therefore, stress was well distributed in the subgrade soil layer with a great action scope, and the value decreased obviously because of the stress dispersion of graded aggregate base. Vertical displacement was the main displacement of the asphalt layer, and on the both sides of traffic loading, displacement was downward and inclined slightly to the central of loading. Vertical and horizontal deformations included in both graded aggregate base layers, and displacement extended to both sides gradually with increasing depth corresponding to stress-distribution trends. Vertical displacement was dominated in the subgrade soil layer which was relatively small.

  16. Numeric processor and text manipulator for the ''MASTER CONTROL'' data-base-management system

    International Nuclear Information System (INIS)

    Kuhn, R.W.

    1976-01-01

    The numeric and text processor of the MASTER CONTROL (MCP) data-base-management system permits the user to define fields and arrays that are functionally dependent on the data retained in a data base. This allows the storage of only the essential and unique information and data, and the calculation of derivable quantities as required. The derived quantity can be expressed as an arithmetic expression, that is, a functional relationship. Functions can be multiply subscripted and can be embedded within other functions at up to 58 levels. They can be stored either semi-permanently in a repertoire of functional relations, or they can be defined interactively from a terminal and used immediately for searching on the derived value. The processor also permits the conversion of literal strings into numbers, and vice versa. In addition, the user can define dictionaries that allow the expansion of keyed sentinels associated with records in the data base into fully descriptive expressions. This option can be used for cost-effective searching and data compaction. The functional definitions are reduced to Polish notation and stored in a disk file from which they are either retrieved on demand and evaluated according to the data of records specified or used in any given MASTER CONTROL command. The language used for the definitions of the numeric processor is essentially FORTRAN; most of the standard functions and over two dozen special functions are thus available. The functional processor provides a powerful technique for the integration of text and data for energy research and for scientific and technological work in general. MASTER CONTROL is operational at the Lawrence Livermore Laboratory (LLL) and at the Los Alamos Scientific Laboratory (LASL). 6 figures, 1 table

  17. Numerical investigation of complex flooding schemes for surfactant polymer based enhanced oil recovery

    Science.gov (United States)

    Dutta, Sourav; Daripa, Prabir

    2015-11-01

    Surfactant-polymer flooding is a widely used method of chemical enhanced oil recovery (EOR) in which an array of complex fluids containing suitable and varying amounts of surfactant or polymer or both mixed with water is injected into the reservoir. This is an example of multiphase, multicomponent and multiphysics porous media flow which is characterized by the spontaneous formation of complex viscous fingering patterns and is modeled by a system of strongly coupled nonlinear partial differential equations with appropriate initial and boundary conditions. Here we propose and discuss a modern, hybrid method based on a combination of a discontinuous, multiscale finite element formulation and the method of characteristics to accurately solve the system. Several types of flooding schemes and rheological properties of the injected fluids are used to numerically study the effectiveness of various injection policies in minimizing the viscous fingering and maximizing oil recovery. Numerical simulations are also performed to investigate the effect of various other physical and model parameters such as heterogeneity, relative permeability and residual saturation on the quantities of interest like cumulative oil recovery, sweep efficiency, fingering intensity to name a few. Supported by the grant NPRP 08-777-1-141 from the Qatar National Research Fund (a member of The Qatar Foundation).

  18. L{sub 1/2} regularization based numerical method for effective reconstruction of bioluminescence tomography

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xueli, E-mail: xlchen@xidian.edu.cn, E-mail: jimleung@mail.xidian.edu.cn; Yang, Defu; Zhang, Qitan; Liang, Jimin, E-mail: xlchen@xidian.edu.cn, E-mail: jimleung@mail.xidian.edu.cn [School of Life Science and Technology, Xidian University, Xi' an 710071 (China); Engineering Research Center of Molecular and Neuro Imaging, Ministry of Education (China)

    2014-05-14

    Even though bioluminescence tomography (BLT) exhibits significant potential and wide applications in macroscopic imaging of small animals in vivo, the inverse reconstruction is still a tough problem that has plagued researchers in a related area. The ill-posedness of inverse reconstruction arises from insufficient measurements and modeling errors, so that the inverse reconstruction cannot be solved directly. In this study, an l{sub 1/2} regularization based numerical method was developed for effective reconstruction of BLT. In the method, the inverse reconstruction of BLT was constrained into an l{sub 1/2} regularization problem, and then the weighted interior-point algorithm (WIPA) was applied to solve the problem through transforming it into obtaining the solution of a series of l{sub 1} regularizers. The feasibility and effectiveness of the proposed method were demonstrated with numerical simulations on a digital mouse. Stability verification experiments further illustrated the robustness of the proposed method for different levels of Gaussian noise.

  19. Numerical Simulation of Recycled Concrete Using Convex Aggregate Model and Base Force Element Method

    Directory of Open Access Journals (Sweden)

    Yijiang Peng

    2016-01-01

    Full Text Available By using the Base Force Element Method (BFEM on potential energy principle, a new numerical concrete model, random convex aggregate model, is presented in this paper to simulate the experiment under uniaxial compression for recycled aggregate concrete (RAC which can also be referred to as recycled concrete. This model is considered as a heterogeneous composite which is composed of five mediums, including natural coarse aggregate, old mortar, new mortar, new interfacial transition zone (ITZ, and old ITZ. In order to simulate the damage processes of RAC, a curve damage model was adopted as the damage constitutive model and the strength theory of maximum tensile strain was used as the failure criterion in the BFEM on mesomechanics. The numerical results obtained in this paper which contained the uniaxial compressive strengths, size effects on strength, and damage processes of RAC are in agreement with experimental observations. The research works show that the random convex aggregate model and the BFEM with the curve damage model can be used for simulating the relationship between microstructure and mechanical properties of RAC.

  20. Risk assessment of storm surge disaster based on numerical models and remote sensing

    Science.gov (United States)

    Liu, Qingrong; Ruan, Chengqing; Zhong, Shan; Li, Jian; Yin, Zhonghui; Lian, Xihu

    2018-06-01

    Storm surge is one of the most serious ocean disasters in the world. Risk assessment of storm surge disaster for coastal areas has important implications for planning economic development and reducing disaster losses. Based on risk assessment theory, this paper uses coastal hydrological observations, a numerical storm surge model and multi-source remote sensing data, proposes methods for valuing hazard and vulnerability for storm surge and builds a storm surge risk assessment model. Storm surges in different recurrence periods are simulated in numerical models and the flooding areas and depth are calculated, which are used for assessing the hazard of storm surge; remote sensing data and GIS technology are used for extraction of coastal key objects and classification of coastal land use are identified, which is used for vulnerability assessment of storm surge disaster. The storm surge risk assessment model is applied for a typical coastal city, and the result shows the reliability and validity of the risk assessment model. The building and application of storm surge risk assessment model provides some basis reference for the city development plan and strengthens disaster prevention and mitigation.

  1. CFD-DEM based numerical simulation of liquid-gas-particle mixture flow in dam break

    Science.gov (United States)

    Park, Kyung Min; Yoon, Hyun Sik; Kim, Min Il

    2018-06-01

    This study investigates the multiphase flow of a liquid-gas-particle mixture in dam break. The open source codes, OpenFOAM and CFDEMproject, were used to reproduce the multiphase flow. The results of the present study are compared with those of previous results obtained by numerical and experimental methods, which guarantees validity of present numerical method to handle the multiphase flow. The particle density ranging from 1100 to 2500 kg/m3 is considered to investigate the effect of the particle density on the behavior of the free-surface and the particles. The particle density has no effect on the liquid front, but it makes the particle front move with different velocity. The time when the liquid front reach at the opposite wall is independent of particle density. However, such time for particle front decrease as particle density increases, which turned out to be proportional to particle density. Based on these results, we classified characteristics of the movement by the front positions of the liquid and the particles. Eventually, the response of the free-surface and particles to particle density is identified by three motion regimes of the advancing, overlapping and delaying motions.

  2. Numerical approximations for the molecular beam epitaxial growth model based on the invariant energy quadratization method

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Xiaofeng, E-mail: xfyang@math.sc.edu [Department of Mathematics, University of South Carolina, Columbia, SC 29208 (United States); Zhao, Jia, E-mail: zhao62@math.sc.edu [Department of Mathematics, University of South Carolina, Columbia, SC 29208 (United States); Department of Mathematics, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599 (United States); Wang, Qi, E-mail: qwang@math.sc.edu [Department of Mathematics, University of South Carolina, Columbia, SC 29208 (United States); Beijing Computational Science Research Center, Beijing (China); School of Materials Science and Engineering, Nankai University, Tianjin (China)

    2017-03-15

    The Molecular Beam Epitaxial model is derived from the variation of a free energy, that consists of either a fourth order Ginzburg–Landau double well potential or a nonlinear logarithmic potential in terms of the gradient of a height function. One challenge in solving the MBE model numerically is how to develop proper temporal discretization for the nonlinear terms in order to preserve energy stability at the time-discrete level. In this paper, we resolve this issue by developing a first and second order time-stepping scheme based on the “Invariant Energy Quadratization” (IEQ) method. The novelty is that all nonlinear terms are treated semi-explicitly, and the resulted semi-discrete equations form a linear system at each time step. Moreover, the linear operator is symmetric positive definite and thus can be solved efficiently. We then prove that all proposed schemes are unconditionally energy stable. The semi-discrete schemes are further discretized in space using finite difference methods and implemented on GPUs for high-performance computing. Various 2D and 3D numerical examples are presented to demonstrate stability and accuracy of the proposed schemes.

  3. The Effectiveness of Role Theory Based Group Counseling on Family Function of Families With Slow-Learning Children

    Directory of Open Access Journals (Sweden)

    فرناز حوله کیان

    2015-12-01

    Full Text Available The purpose of this study was to examine the effectiveness of group counseling based on the role theory on function of families with slow-learningchildren. The present study is a Quasi - experimental research with pre-test and post - test, and with experimental and control groups. Statistical population in cludes all mothers of slow - learning children in thecity of Hamadan. A sample of 30 subjects selected through available sampling method from high schools with equal numbers of both genders. Based on cloning features were allocated in experimental and control groups. The experimental group received 10 group counseling and control group was placed in the waiting list. Data collection instrument is family function questionnaire. Descriptive statistics, covariance analysis and t-test were applied to analyze data. It was found that there is a significant difference between post-test of experimental and control group (p<0/001. t-test showed significant difference in effectiveness of role theory group counseling for mothers with slow-learning girl and boy (p<0/001. So we can conclude that group counseling based on the role theory is effective on improving the function of families with slow-learning children. In addition, this effectivenessis different for families of slow-learning children based on the gender of child.

  4. Analyzing asteroid reflectance spectra with numerical tools based on scattering simulations

    Science.gov (United States)

    Penttilä, Antti; Väisänen, Timo; Markkanen, Johannes; Martikainen, Julia; Gritsevich, Maria; Muinonen, Karri

    2017-04-01

    We are developing a set of numerical tools that can be used in analyzing the reflectance spectra of granular materials such as the regolith surface of atmosphereless Solar system objects. Our goal is to be able to explain, with realistic numerical scattering models, the spectral features arising when materials are intimately mixed together. We include the space-weathering -type effects in our simulations, i.e., mixing host mineral locally with small inclusions of another material in small proportions. Our motivation for this study comes from the present lack of such tools. The current common practice is to apply a semi-physical approximate model such as some variation of Hapke models [e.g., 1] or the Shkuratov model [2]. These models are expressed in a closed form so that they are relatively fast to apply. They are based on simplifications on the radiative transfer theory. The problem is that the validity of the model is not always guaranteed, and the derived physical properties related to particle scattering properties can be unrealistic [3]. We base our numerical tool into a chain of scattering simulations. Scattering properties of small inclusions inside an absorbing host matrix can be derived using exact methods solving the Maxwell equations of the system. The next step, scattering by a single regolith grain, is solved using a geometrical optics method accounting for surface reflections, internal absorption, and possibly the internal diffuse scattering. The third step involves the radiative transfer simulations of these regolith grains in a macroscopic planar element. The chain can be continued next with shadowing simulation over the target surface elements, and finally by integrating the bidirectional reflectance distribution function over the object's shape. Most of the tools in the proposed chain already exist, and one practical task for us is to tie these together into an easy-to-use toolchain that can be publicly distributed. We plan to open the

  5. Evaluation of a population-based approach to familial colorectal cancer.

    Science.gov (United States)

    Parfrey, P S; Dicks, E; Parfrey, O; McNicholas, P J; Noseworthy, H; Woods, M O; Negriin, C; Green, J

    2017-05-01

    As Newfoundland has the highest rate of familial colorectal cancer (CRC) in the world, we started a population-based clinic to provide colonoscopic and Lynch syndrome (LS) screening recommendations to families of CRC patients based on family risk. Of 1091 incident patients 51% provided a family history. Seventy-two percent of families were at low or intermediate-low risk of CRC and colonoscopic screening recommendations were provided by letter. Twenty-eight percent were at high and intermediate-high risk and were referred to the genetic counsellor, but only 30% (N = 48) were interviewed by study end. Colonoscopy was recommended more frequently than every 5 years in 35% of families. Lower family risk was associated with older age of proband but the frequency of screening colonoscopy recommendations varied across all age groups, driven by variability in family history. Twenty-four percent had a high MMR predict score for a Lynch syndrome mutation, and 23% fulfilled the Provincial Program criteria for LS screening. A population-based approach in the provision of colonoscopic screening recommendations to families at risk of CRC was limited by the relatively low response rate. A family history first approach to the identification of LS families was inefficient. © 2016 The Authors. Clinical Genetics published by John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Two dimensional fully nonlinear numerical wave tank based on the BEM

    Science.gov (United States)

    Sun, Zhe; Pang, Yongjie; Li, Hongwei

    2012-12-01

    The development of a two dimensional numerical wave tank (NWT) with a rocker or piston type wavemaker based on the high order boundary element method (BEM) and mixed Eulerian-Lagrangian (MEL) is examined. The cauchy principle value (CPV) integral is calculated by a special Gauss type quadrature and a change of variable. In addition the explicit truncated Taylor expansion formula is employed in the time-stepping process. A modified double nodes method is assumed to tackle the corner problem, as well as the damping zone technique is used to absorb the propagation of the free surface wave at the end of the tank. A variety of waves are generated by the NWT, for example; a monochromatic wave, solitary wave and irregular wave. The results confirm the NWT model is efficient and stable.

  7. A hybrid bird mating optimizer algorithm with teaching-learning-based optimization for global numerical optimization

    Directory of Open Access Journals (Sweden)

    Qingyang Zhang

    2015-02-01

    Full Text Available Bird Mating Optimizer (BMO is a novel meta-heuristic optimization algorithm inspired by intelligent mating behavior of birds. However, it is still insufficient in convergence of speed and quality of solution. To overcome these drawbacks, this paper proposes a hybrid algorithm (TLBMO, which is established by combining the advantages of Teaching-learning-based optimization (TLBO and Bird Mating Optimizer (BMO. The performance of TLBMO is evaluated on 23 benchmark functions, and compared with seven state-of-the-art approaches, namely BMO, TLBO, Artificial Bee Bolony (ABC, Particle Swarm Optimization (PSO, Fast Evolution Programming (FEP, Differential Evolution (DE, Group Search Optimization (GSO. Experimental results indicate that the proposed method performs better than other existing algorithms for global numerical optimization.

  8. Wavelet Analysis on Turbulent Structure in Drag-Reducing Channel Flow Based on Direct Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Xuan Wu

    2013-01-01

    Full Text Available Direct numerical simulation has been performed to study a polymer drag-reducing channel flow by using a discrete-element model. And then, wavelet analyses are employed to investigate the multiresolution characteristics of velocity components based on DNS data. Wavelet decomposition is applied to decompose velocity fluctuation time series into ten different frequency components including approximate component and detailed components, which show more regular intermittency and burst events in drag-reducing flow. The energy contribution, intermittent factor, and intermittent energy are calculated to investigate characteristics of different frequency components. The results indicate that energy contributions of different frequency components are redistributed by polymer additives. The energy contribution of streamwise approximate component in drag-reducing flow is up to 82%, much more than 25% in the Newtonian flow. Feature of turbulent multiscale structures is shown intuitively by continuous wavelet transform, verifying that turbulent structures become much more regular in drag-reducing flow.

  9. Free Software Development. 3. Numerical Description of Soft Acid with Soft Base Titration

    Directory of Open Access Journals (Sweden)

    Lorentz JÄNTSCHI

    2002-12-01

    Full Text Available The analytical methods of qualitative and quantitative determination of ions in solutions are very flexible to automation. The present work is focus on modeling the process of titration and presents a numerical simulation of acid-base titration. A PHP program to compute all iterations in titration process that solves a 3th rank equation to find value of pH for was built and is available through http internet protocol at the address: http://vl.academicdirect.org/molecular_dynamics/ab_titrations/v1.1/ The method allows expressing the value of pH in any point of titration process and permits to observe the equivalence point of titration.

  10. Application of the results of experimental and numerical turbulent flow researches based on pressure pulsations analysis

    Science.gov (United States)

    Kovalnogov, Vladislav N.; Fedorov, Ruslan V.; Khakhalev, Yuri A.; Khakhaleva, Larisa V.; Chukalin, Andrei V.

    2017-07-01

    The numerical investigation of the turbulent flow with the impacts, based on a modified Prandtl mixing-length model with using of the analysis of pulsations of pressure, calculation of structure and a friction factor of a turbulent flow is made. These results under the study allowed us to propose a new design of a cooled turbine blade and gas turbine mobile. The turbine blade comprises a combined cooling and cylindrical cavity on the blade surface, and on the inner surfaces of the cooling channels too damping cavity located on the guide vanes of the compressor of a gas turbine engine, increase the supply of gas-dynamic stability of the compressor of a gas turbine engine, reduce the resistance of the guide blades, and increase the efficiency of the turbine engine.

  11. Numerical simulation and experiments of precision bar cutting based on high speed and restrained state

    International Nuclear Information System (INIS)

    Song, J.L.; Li, Y.T.; Liu, Z.Q.; Fu, J.H.; Ting, K.L.

    2009-01-01

    According to the disadvantages of conventional bar cutting technology such as low-cutting speed, inferior section quality, high-processing cost and so on, a kind of novel precision bar cutting technology has been proposed. The cutting mechanism has also been analyzed. Finite element numerical simulation of the bar cutting process under different working conditions has been carried out with DEFORM. The stress and strain fields at different cutting speed and the variation curves of the cutting force and appropriate cutting parameters have been obtained. Scanning electron microscopy analysis of the cutting surface showed that the finite-element simulation result is correct and better cutting quality can be obtained with the developed bar cutting technology and equipment based on high speed and restrained state

  12. Numerical Investigation on Electron and Ion Transmission of GEM-based Detectors

    Science.gov (United States)

    Bhattacharya, Purba; Sahoo, Sumanya Sekhar; Biswas, Saikat; Mohanty, Bedangadas; Majumdar, Nayana; Mukhopadhyay, Supratik

    2018-02-01

    ALICE at the LHC is planning a major upgrade of its detector systems, including the TPC, to cope with an increase of the LHC luminosity after 2018. Different R&D activities are currently concentrated on the adoption of the Gas Electron Multiplier (GEM) as the gas amplification stage of the ALICE-TPC upgrade version. The major challenge is to have low ion feedback in the drift volume as well as to ensure a collection of good percentage of primary electrons in the signal generation process. In the present work, Garfield simulation framework has been adopted to numerically estimate the electron transparency and ion backflow fraction of GEM-based detectors. In this process, extensive simulations have been carried out to enrich our understanding of the complex physical processes occurring within single, triple and quadruple GEM detectors. A detailed study has been performed to observe the effect of detector geometry, field configuration and magnetic field on the above mentioned characteristics.

  13. Theoretical and numerical studies of TWR based on ESFR core design

    International Nuclear Information System (INIS)

    Zhang, Dalin; Chen, Xue-Nong; Flad, Michael; Rineiski, Andrei; Maschek, Werner

    2013-01-01

    Highlights: • The traveling wave reactor (TWR) is studied based on the core design of the European Sodium-cooled Fast Reactor (ESFR). • The conventional fuel shuffling technique is used to produce a continuous radial fuel movement. • A stationary self sustainable nuclear fission power can be established asymptotically by only loading natural or depleted uranium. • The multi-group deterministic neutronic code ERANOS is applied. - Abstract: This paper deals with the so-called traveling wave reactor (TWR) based on the core design of the European Sodium-cooled Fast Reactor (ESFR). The current concept of TWR is to use the conventional radial fuel shuffling technique to produce a continuous radial fuel movement so that a stationary self sustainable nuclear fission power can be established asymptotically by only loading fertile material consisting of natural or depleted uranium. The core design of ESFR loaded with metallic uranium fuel without considering the control mechanism is used as a practical application example. The theoretical studies focus mainly on qualitative feasibility analyses, i.e. to identify out in general essential parameter dependences of such a kind of reactor. The numerical studies are carried out more specifically on a certain core design. The multi-group deterministic neutronic code ERANOS with the JEFF3.1 data library is applied as a basic tool to perform the neutronics and burn-up calculations. The calculations are performed in a 2-D R-Z geometry, which is sufficient for the current core layout. Numerical results of radial fuel shuffling indicate that the asymptotic k eff parabolically varies with the shuffling period, while the burn-up increases linearly. Typical shuffling periods investigated in this study are in the range of 300–1000 days. The important parameters, e.g. k eff , the burn-up, the power peaking factor, and safety coefficients are calculated

  14. A physiologically-inspired model of numerical classification based on graded stimulus coding

    Directory of Open Access Journals (Sweden)

    John Pearson

    2010-01-01

    Full Text Available In most natural decision contexts, the process of selecting among competing actions takes place in the presence of informative, but potentially ambiguous, stimuli. Decisions about magnitudes—quantities like time, length, and brightness that are linearly ordered—constitute an important subclass of such decisions. It has long been known that perceptual judgments about such quantities obey Weber’s Law, wherein the just-noticeable difference in a magnitude is proportional to the magnitude itself. Current physiologically inspired models of numerical classification assume discriminations are made via a labeled line code of neurons selectively tuned for numerosity, a pattern observed in the firing rates of neurons in the ventral intraparietal area (VIP of the macaque. By contrast, neurons in the contiguous lateral intraparietal area (LIP signal numerosity in a graded fashion, suggesting the possibility that numerical classification could be achieved in the absence of neurons tuned for number. Here, we consider the performance of a decision model based on this analog coding scheme in a paradigmatic discrimination task—numerosity bisection. We demonstrate that a basic two-neuron classifier model, derived from experimentally measured monotonic responses of LIP neurons, is sufficient to reproduce the numerosity bisection behavior of monkeys, and that the threshold of the classifier can be set by reward maximization via a simple learning rule. In addition, our model predicts deviations from Weber Law scaling of choice behavior at high numerosity. Together, these results suggest both a generic neuronal framework for magnitude-based decisions and a role for reward contingency in the classification of such stimuli.

  15. Numerical simulation and comparison of nonlinear self-focusing based on iteration and ray tracing

    Science.gov (United States)

    Li, Xiaotong; Chen, Hao; Wang, Weiwei; Ruan, Wangchao; Zhang, Luwei; Cen, Zhaofeng

    2017-05-01

    Self-focusing is observed in nonlinear materials owing to the interaction between laser and matter when laser beam propagates. Some of numerical simulation strategies such as the beam propagation method (BPM) based on nonlinear Schrödinger equation and ray tracing method based on Fermat's principle have applied to simulate the self-focusing process. In this paper we present an iteration nonlinear ray tracing method in that the nonlinear material is also cut into massive slices just like the existing approaches, but instead of paraxial approximation and split-step Fourier transform, a large quantity of sampled real rays are traced step by step through the system with changing refractive index and laser intensity by iteration. In this process a smooth treatment is employed to generate a laser density distribution at each slice to decrease the error caused by the under-sampling. The characteristics of this method is that the nonlinear refractive indices of the points on current slice are calculated by iteration so as to solve the problem of unknown parameters in the material caused by the causal relationship between laser intensity and nonlinear refractive index. Compared with the beam propagation method, this algorithm is more suitable for engineering application with lower time complexity, and has the calculation capacity for numerical simulation of self-focusing process in the systems including both of linear and nonlinear optical media. If the sampled rays are traced with their complex amplitudes and light paths or phases, it will be possible to simulate the superposition effects of different beam. At the end of the paper, the advantages and disadvantages of this algorithm are discussed.

  16. Familial risk of epilepsy: a population-based study

    Science.gov (United States)

    Peljto, Anna L.; Barker-Cummings, Christie; Vasoli, Vincent M.; Leibson, Cynthia L.; Hauser, W. Allen; Buchhalter, Jeffrey R.

    2014-01-01

    Almost all previous studies of familial risk of epilepsy have had potentially serious methodological limitations. Our goal was to address these limitations and provide more rigorous estimates of familial risk in a population-based study. We used the unique resources of the Rochester Epidemiology Project to identify all 660 Rochester, Minnesota residents born in 1920 or later with incidence of epilepsy from 1935–94 (probands) and their 2439 first-degree relatives who resided in Olmsted County. We assessed incidence of epilepsy in relatives by comprehensive review of the relatives’ medical records, and estimated age-specific cumulative incidence and standardized incidence ratios for epilepsy in relatives compared with the general population, according to proband and relative characteristics. Among relatives of all probands, cumulative incidence of epilepsy to age 40 was 4.7%, and risk was increased 3.3-fold (95% confidence interval 2.75–5.99) compared with population incidence. Risk was increased to the greatest extent in relatives of probands with idiopathic generalized epilepsies (standardized incidence ratio 6.0) and epilepsies associated with intellectual or motor disability presumed present from birth, which we denoted ‘prenatal/developmental cause’ (standardized incidence ratio 4.3). Among relatives of probands with epilepsy without identified cause (including epilepsies classified as ‘idiopathic’ or ‘unknown cause’), risk was significantly increased for epilepsy of prenatal/developmental cause (standardized incidence ratio 4.1). Similarly, among relatives of probands with prenatal/developmental cause, risk was significantly increased for epilepsies without identified cause (standardized incidence ratio 3.8). In relatives of probands with generalized epilepsy, standardized incidence ratios were 8.3 (95% confidence interval 2.93–15.31) for generalized epilepsy and 2.5 (95% confidence interval 0.92–4.00) for focal epilepsy. In relatives of

  17. UAV based hydromorphological mapping of a river reach to improve hydrodynamic numerical models

    Science.gov (United States)

    Lükő, Gabriella; Baranya, Sándor; Rüther, Nils

    2017-04-01

    Unmanned Aerial Vehicles (UAVs) are increasingly used in the field of engineering surveys. In river engineering, or in general, water resources engineering, UAV based measurements have a huge potential. For instance, indirect measurements of the flow discharge using e.g. large-scale particle image velocimetry (LSPIV), particle tracking velocimetry (PTV), space-time image velocimetry (STIV) or radars became a real alternative for direct flow measurements. Besides flow detection, topographic surveys are also essential for river flow studies as the channel and floodplain geometry is the primary steering feature of the flow. UAVs can play an important role in this field, too. The widely used laser based topographic survey method (LIDAR) can be deployed on UAVs, moreover, the application of the Structure from Motion (SfM) method, which is based on images taken by UAVs, might be an even more cost-efficient alternative to reveal the geometry of distinct objects in the river or on the floodplain. The goal of this study is to demonstrate the utilization of photogrammetry and videogrammetry from airborne footage to provide geometry and flow data for a hydrodynamic numerical simulation of a 2 km long river reach in Albania. First, the geometry of the river is revealed from photogrammetry using the SfM method. Second, a more detailed view of the channel bed at low water level is taken. Using the fine resolution images, a Matlab based code, BASEGrain, developed by the ETH in Zürich, will be applied to determine the grain size characteristics of the river bed. This information will be essential to define the hydraulic roughness in the numerical model. Third, flow mapping is performed using UAV measurements and LSPIV method to quantitatively asses the flow field at the free surface and to estimate the discharge in the river. All data collection and analysis will be carried out using a simple, low-cost UAV, moreover, for all the data processing, open source, freely available

  18. Numerical analysis

    CERN Document Server

    Scott, L Ridgway

    2011-01-01

    Computational science is fundamentally changing how technological questions are addressed. The design of aircraft, automobiles, and even racing sailboats is now done by computational simulation. The mathematical foundation of this new approach is numerical analysis, which studies algorithms for computing expressions defined with real numbers. Emphasizing the theory behind the computation, this book provides a rigorous and self-contained introduction to numerical analysis and presents the advanced mathematics that underpin industrial software, including complete details that are missing from most textbooks. Using an inquiry-based learning approach, Numerical Analysis is written in a narrative style, provides historical background, and includes many of the proofs and technical details in exercises. Students will be able to go beyond an elementary understanding of numerical simulation and develop deep insights into the foundations of the subject. They will no longer have to accept the mathematical gaps that ex...

  19. Assessment of damage localization based on spatial filters using numerical crack propagation models

    International Nuclear Information System (INIS)

    Deraemaeker, Arnaud

    2011-01-01

    This paper is concerned with vibration based structural health monitoring with a focus on non-model based damage localization. The type of damage investigated is cracking of concrete structures due to the loss of prestress. In previous works, an automated method based on spatial filtering techniques applied to large dynamic strain sensor networks has been proposed and tested using data from numerical simulations. In the simulations, simplified representations of cracks (such as a reduced Young's modulus) have been used. While this gives the general trend for global properties such as eigen frequencies, the change of more local features, such as strains, is not adequately represented. Instead, crack propagation models should be used. In this study, a first attempt is made in this direction for concrete structures (quasi brittle material with softening laws) using crack-band models implemented in the commercial software DIANA. The strategy consists in performing a non-linear computation which leads to cracking of the concrete, followed by a dynamic analysis. The dynamic response is then used as the input to the previously designed damage localization system in order to assess its performances. The approach is illustrated on a simply supported beam modeled with 2D plane stress elements.

  20. High Performance Computation of a Jet in Crossflow by Lattice Boltzmann Based Parallel Direct Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Jiang Lei

    2015-01-01

    Full Text Available Direct numerical simulation (DNS of a round jet in crossflow based on lattice Boltzmann method (LBM is carried out on multi-GPU cluster. Data parallel SIMT (single instruction multiple thread characteristic of GPU matches the parallelism of LBM well, which leads to the high efficiency of GPU on the LBM solver. With present GPU settings (6 Nvidia Tesla K20M, the present DNS simulation can be completed in several hours. A grid system of 1.5 × 108 is adopted and largest jet Reynolds number reaches 3000. The jet-to-free-stream velocity ratio is set as 3.3. The jet is orthogonal to the mainstream flow direction. The validated code shows good agreement with experiments. Vortical structures of CRVP, shear-layer vortices and horseshoe vortices, are presented and analyzed based on velocity fields and vorticity distributions. Turbulent statistical quantities of Reynolds stress are also displayed. Coherent structures are revealed in a very fine resolution based on the second invariant of the velocity gradients.

  1. Validation of a numerical 3-D fluid-structure interaction model for a prosthetic valve based on experimental PIV measurements.

    Science.gov (United States)

    Guivier-Curien, Carine; Deplano, Valérie; Bertrand, Eric

    2009-10-01

    A numerical 3-D fluid-structure interaction (FSI) model of a prosthetic aortic valve was developed, based on a commercial computational fluid dynamics (CFD) software program using an Arbitrary Eulerian Lagrangian (ALE) formulation. To make sure of the validity of this numerical model, an equivalent experimental model accounting for both the geometrical features and the hydrodynamic conditions was also developed. The leaflet and the flow behaviours around the bileaflet valve were investigated numerically and experimentally by performing particle image velocimetry (PIV) measurements. Through quantitative and qualitative comparisons, it was shown that the leaflet behaviour and the velocity fields were similar in both models. The present study allows the validation of a fully coupled 3-D FSI numerical model. The promising numerical tool could be therefore used to investigate clinical issues involving the aortic valve.

  2. Predictors and Moderators of Outcome in Family-Based Treatment for Adolescent Bulimia Nervosa

    Science.gov (United States)

    Le Grange, Daniel; Crosby, Ross D.; Lock, James

    2008-01-01

    The predictors and moderators of treatment outcome for adolescents with bulimia nervosa (BN) are explored among those who participated in family based treatment or individual supportive psychotherapy. It is concluded that family-based treatment of BN may be most effective in those cases with low levels of eating disorder psychopathology.

  3. Empirically Supported Family-Based Treatments for Conduct Disorder and Delinquency in Adolescents

    Science.gov (United States)

    Henggeler, Scott W.; Sheidow, Ashli J.

    2012-01-01

    Several family-based treatments of conduct disorder and delinquency in adolescents have emerged as evidence-based and, in recent years, have been transported to more than 800 community practice settings. These models include multisystemic therapy, functional family therapy, multidimensional treatment foster care, and, to a lesser extent, brief…

  4. Teaming up for Literacy: Examining Participants' Contributions to a Collaborative Family-Based Program

    Science.gov (United States)

    Kumar, Tracey

    2016-01-01

    This study of participants' contributions to a university-based family literacy program was informed by both "funds of knowledge" (Moll, 1992) and "multiple literacies" (Auerbach, 1995). The study examined participants' contributions to the design, implementation, and evaluation of a university-based family literacy program. In…

  5. Home Based Care | Chukwukelu | Nigerian Journal of Family Practice

    African Journals Online (AJOL)

    Cost considerations thus tend to shift the burden of both acute and long-term care to the family. In the very poor countries, health centres are overwhelmed, staff are not paid for months, drugs and equipment are often unavailable, patients' expectations of service quality are not met, etc. Most common ailments are therefore ...

  6. Development of Numerical Analysis Techniques Based on Damage Mechanics and Fracture Mechanics

    International Nuclear Information System (INIS)

    Chang, Yoon Suk; Lee, Dock Jin; Choi, Shin Beom; Kim, Sun Hye; Cho, Doo Ho; Lee, Hyun Boo

    2010-04-01

    The scatter of measured fracture toughness data and transferability problems among different crack configurations as well as geometry and loading conditions are major obstacles for application of fracture mechanics. To address these issues, recently, concerns on the local approach employing reliable micro-mechanical damage models are being increased again in connection with a progress of computational technology. In the present research, as part of development of fracture mechanical evaluation model for material degradation of reactor pressure boundary, several investigations on fracture behaviors were carried out. Especially, a numerical scheme to determine key parameters consisting both cleavage and ductile fracture estimate models was changed efficiently by incorporating a genetic algorithm. Also, with regard to the well-known master curve, newly reported methods such as bimodal master curve, randomly inhomogeneous master curve and single point estimation were reviewed to deal with homogeneous and inhomogeneous material characteristics. A series of preliminary finite element analyses was conducted to examine the element size effect on micro-mechanical models. Then, a new thickness correction equation was derived from parametric three-dimensional numerical simulations, which was founded on the current test standard, ASTM E1921, but could lead to get more realistic fracture toughness values. As a result, promising modified master curves as well as fracture toughness diagrams to convert data between pre-cracked V-notched and compact tension specimens were generated. Moreover, a user-subroutine in relation to GTN(Gurson-Tvergaard-Needleman) model was made by adopting Hill's 48 yield potential theory. By applying GTN model combined with the subroutine to small punch specimens, the effect of inhomogeneous properties on fracture behaviors of miniature specimens was confirmed. Therefore, it is anticipated that the aforementioned enhanced research results can be utilized

  7. An efficient soil water balance model based on hybrid numerical and statistical methods

    Science.gov (United States)

    Mao, Wei; Yang, Jinzhong; Zhu, Yan; Ye, Ming; Liu, Zhao; Wu, Jingwei

    2018-04-01

    Most soil water balance models only consider downward soil water movement driven by gravitational potential, and thus cannot simulate upward soil water movement driven by evapotranspiration especially in agricultural areas. In addition, the models cannot be used for simulating soil water movement in heterogeneous soils, and usually require many empirical parameters. To resolve these problems, this study derives a new one-dimensional water balance model for simulating both downward and upward soil water movement in heterogeneous unsaturated zones. The new model is based on a hybrid of numerical and statistical methods, and only requires four physical parameters. The model uses three governing equations to consider three terms that impact soil water movement, including the advective term driven by gravitational potential, the source/sink term driven by external forces (e.g., evapotranspiration), and the diffusive term driven by matric potential. The three governing equations are solved separately by using the hybrid numerical and statistical methods (e.g., linear regression method) that consider soil heterogeneity. The four soil hydraulic parameters required by the new models are as follows: saturated hydraulic conductivity, saturated water content, field capacity, and residual water content. The strength and weakness of the new model are evaluated by using two published studies, three hypothetical examples and a real-world application. The evaluation is performed by comparing the simulation results of the new model with corresponding results presented in the published studies, obtained using HYDRUS-1D and observation data. The evaluation indicates that the new model is accurate and efficient for simulating upward soil water flow in heterogeneous soils with complex boundary conditions. The new model is used for evaluating different drainage functions, and the square drainage function and the power drainage function are recommended. Computational efficiency of the new

  8. Numerical Analysis of Hydrodynamics for Bionic Oscillating Hydrofoil Based on Panel Method

    Directory of Open Access Journals (Sweden)

    Gang Xue

    2016-01-01

    Full Text Available The kinematics model based on the Slender-Body theory is proposed from the bionic movement of real fish. The Panel method is applied to the hydrodynamic performance analysis innovatively, with the Gauss-Seidel method to solve the Navier-Stokes equations additionally, to evaluate the flexible deformation of fish in swimming accurately when satisfying the boundary conditions. A physical prototype to mimic the shape of tuna is developed with the revolutionized technology of rapid prototyping manufacturing. The hydrodynamic performance for rigid oscillating hydrofoil is analyzed with the proposed method, and it shows good coherence with the cases analyzed by the commercial software Fluent and the experimental data from robofish. Furthermore, the hydrodynamic performance of coupled hydrofoil, which consisted of flexible fish body and rigid caudal fin, is analyzed with the proposed method. It shows that the caudal fin has great influence on trailing vortex shedding and the phase angle is the key factor on hydrodynamic performance. It is verified that the shape of trailing vortex is similar to the image of the motion curve at the trailing edge as the assumption of linear vortex plane under the condition of small downwash velocity. The numerical analysis of hydrodynamics for bionic movement based on the Panel method has certain value to reveal the fish swimming mechanism.

  9. The Numerical Simulation of the Crack Elastoplastic Extension Based on the Extended Finite Element Method

    Directory of Open Access Journals (Sweden)

    Xia Xiaozhou

    2013-01-01

    Full Text Available In the frame of the extended finite element method, the exponent disconnected function is introduced to reflect the discontinuous characteristic of crack and the crack tip enrichment function which is made of triangular basis function, and the linear polar radius function is adopted to describe the displacement field distribution of elastoplastic crack tip. Where, the linear polar radius function form is chosen to decrease the singularity characteristic induced by the plastic yield zone of crack tip, and the triangle basis function form is adopted to describe the displacement distribution character with the polar angle of crack tip. Based on the displacement model containing the above enrichment displacement function, the increment iterative form of elastoplastic extended finite element method is deduced by virtual work principle. For nonuniform hardening material such as concrete, in order to avoid the nonsymmetry characteristic of stiffness matrix induced by the non-associate flowing of plastic strain, the plastic flowing rule containing cross item based on the least energy dissipation principle is adopted. Finally, some numerical examples show that the elastoplastic X-FEM constructed in this paper is of validity.

  10. LSSVM-Based Rock Failure Criterion and Its Application in Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Changxing Zhu

    2015-01-01

    Full Text Available A rock failure criterion is very important for the prediction of the failure of rocks or rock masses in rock mechanics and engineering. Least squares support vector machines (LSSVM are a powerful tool for addressing complex nonlinear problems. This paper describes a LSSVM-based rock failure criterion for analyzing the deformation of a circular tunnel under different in situ stresses without assuming a function form. First, LSSVM was used to represent the nonlinear relationship between the mechanical properties of rock and the failure behavior of the rock in order to construct a rock failure criterion based on experimental data. Then, this was used in a hypothetical numerical analysis of a circular tunnel to analyze the mechanical behavior of the rock mass surrounding the tunnel. The Mohr-Coulomb and Hoek-Brown failure criteria were also used to analyze the same case, and the results were compared; these clearly indicate that LSSVM can be used to establish a rock failure criterion and to predict the failure of a rock mass during excavation of a circular tunnel.

  11. Spontaneous Synchronization in Two Mutually Coupled Memristor-Based Chua’s Circuits: Numerical Investigations

    Directory of Open Access Journals (Sweden)

    Eleonora Bilotta

    2014-01-01

    Full Text Available Chaotic dynamics of numerous memristor-based circuits is widely reported in literature. Recently, some works have appeared which study the problem of synchronization control of these systems in a master-slave configuration. In the present paper, the spontaneous dynamic behavior of two chaotic memristor-based Chua’s circuits, mutually interacting through a coupling resistance, was studied via computer simulations in order to study possible self-organized synchronization phenomena. The used memristor is a flux controlled memristor with a cubic nonlinearity, and it can be regarded as a time-varying memductance. The memristor, in effect, retains memory of its past dynamic and any difference in the initial conditions of the two circuits results in different values of the corresponding memductances. In this sense, due to the memory effect of the memristor, even if coupled circuits have the same parameters they do not constitute two completely identical chaotic oscillators. As is known, for nonidentical chaotic systems, in addition to complete synchronizations (CS other weaker forms of synchronization which provide correlations between the signals of the two systems can also occur. Depending on initial conditions and coupling strength, both chaotic and nonchaotic synchronization are observed for the system considered in this work.

  12. Prediction of 222 Rn exhalation rates from phosphogypsum based stacks. Part II: preliminary numerical results

    International Nuclear Information System (INIS)

    Rabi, Jose A.; Mohamad, Abdulmajeed A.

    2004-01-01

    The first part of this paper proposes a steady-state 2-D model for 222 Rn transport in phosphogypsum stacks. In this second part, the dimensionless model equations are solved numerically with the help of an existing finite-volume simulator that has been successfully used to solve heat and mass transfer problems in porous media. As a test case, a rectangular shaped stack is considered in order to verify the ability of the proposed parametric approach to account for concurrent effects on the 222 Rn exhalation into the local atmosphere. Air flow is supposed to be strictly buoyancy driven and the ground is assumed to be impermeable to 222 Rn and at a higher temperature under the stack base. Dimensionless controlling parameters are set to representative values and results are presented for Grashof number in the range 10 6 ≤Gr≤ 10 8 , corresponding to very small to small temperature differences between incoming air and ground underneath the stack base. For the particular set of parameters and inasmuch as Gr increases, streamlines presented basically the same pattern while internal isotherms and iso concentration lines remained almost unchanged. Total average Sherwood number proved to be rather insensitive to Gr while total average Nusselt increased slightly with Gr. (author)

  13. Displacement-Based Seismic Design Procedure for Framed Buildings with Dissipative Braces Part II: Numerical Results

    International Nuclear Information System (INIS)

    Mazza, Fabio; Vulcano, Alfonso

    2008-01-01

    For a widespread application of dissipative braces to protect framed buildings against seismic loads, practical and reliable design procedures are needed. In this paper a design procedure based on the Direct Displacement-Based Design approach is adopted, assuming the elastic lateral storey-stiffness of the damped braces proportional to that of the unbraced frame. To check the effectiveness of the design procedure, presented in an associate paper, a six-storey reinforced concrete plane frame, representative of a medium-rise symmetric framed building, is considered as primary test structure; this structure, designed in a medium-risk region, is supposed to be retrofitted as in a high-risk region, by insertion of diagonal braces equipped with hysteretic dampers. A numerical investigation is carried out to study the nonlinear static and dynamic responses of the primary and the damped braced test structures, using step-by-step procedures described in the associate paper mentioned above; the behaviour of frame members and hysteretic dampers is idealized by bilinear models. Real and artificial accelerograms, matching EC8 response spectrum for a medium soil class, are considered for dynamic analyses

  14. Numerical study of shear thickening fluid with discrete particles embedded in a base fluid

    Directory of Open Access Journals (Sweden)

    W Zhu

    2016-09-01

    Full Text Available The Shear Thickening Fluid (STF is a dilatant material, which displays non-Newtonian characteristics in its unique ability to transit from a low viscosity fluid to a high viscosity fluid. The research performed investigates the STF behavior by modeling and simulation of the interaction between the base flow and embedded rigid particles when subjected to shear stress. The model considered the Lagrangian description of the rigid particles and the Eulerian description of fluid flow. The numerical analysis investigated key parameters such as applied flow acceleration, particle distribution and arrangement, volume concentration of particles, particle size, shape and their behavior in a Newtonian and non-Newtonian fluid base. The fluid-particle interaction model showed that the arrangement, size, shape and volume concentration of the particles had a significant effect on the behavior of the STF. Although non-conclusive, the addition of particles in non-Newtonian fluids showed a promising trend of improved shear thickening effects at high shear strain rates.

  15. Scour Monitoring System for Subsea Pipeline Based on Active Thermometry: Numerical and Experimental Studies

    Directory of Open Access Journals (Sweden)

    Jun Du

    2013-01-01

    Full Text Available A scour monitoring system for subsea pipeline based on active thermometry is proposed in this paper. The temperature reading of the proposed system is based on a distributed Brillouin optical fiber sensing technique. A thermal cable acts as the main component of the system, which consists of a heating belt, armored optical fibers and heat-shrinkable tubes which run parallel to the pipeline. The scour-induced free span can be monitored through different heat transfer behaviors of in-water and in-sediment scenarios during heating and cooling processes. Two sets of experiments, including exposing different lengths of the upper surface of the pipeline to water and creating free spans of various lengths, were carried out in laboratory. In both cases, the scour condition was immediately detected by the proposed monitoring system, which confirmed the system is robust and very sensitive. Numerical study of the method was also investigated by using the finite element method (FEM with ANSYS, resulting in reasonable agreement with the test data. This brand new system provides a promising, low cost, highly precise and flexible approach for scour monitoring of subsea pipelines.

  16. Numerical simulation of residual stress in laser based additive manufacturing process

    Science.gov (United States)

    Kalyan Panda, Bibhu; Sahoo, Seshadev

    2018-03-01

    Minimizing the residual stress build-up in metal-based additive manufacturing plays a pivotal role in selecting a particular material and technique for making an industrial part. In beam-based additive manufacturing, although a great deal of effort has been made to minimize the residual stresses, it is still elusive how to do so by simply optimizing the processing parameters, such as beam size, beam power, and scan speed. Amid different types of additive manufacturing processes, Direct Metal Laser Sintering (DMLS) process uses a high-power laser to melt and sinter layers of metal powder. The rapid solidification and heat transfer on powder bed endows a high cooling rate which leads to the build-up of residual stresses, that will affect the mechanical properties of the build parts. In the present work, the authors develop a numerical thermo-mechanical model for the measurement of residual stress in the AlSi10Mg build samples by using finite element method. Transient temperature distribution in the powder bed was assessed using the coupled thermal to structural model. Subsequently, the residual stresses were estimated with varying laser power. From the simulation result, it found that the melt pool dimensions increase with increasing the laser power and the magnitude of residual stresses in the built part increases.

  17. Numerical simulation of Trichel pulses of negative DC corona discharge based on a plasma chemical model

    Science.gov (United States)

    Chen, Xiaoyue; Lan, Lei; Lu, Hailiang; Wang, Yu; Wen, Xishan; Du, Xinyu; He, Wangling

    2017-10-01

    A numerical simulation method of negative direct current (DC) corona discharge based on a plasma chemical model is presented, and a coaxial cylindrical gap is adopted. There were 15 particle species and 61 kinds of collision reactions electrons involved, and 22 kinds of reactions between ions are considered in plasma chemical reactions. Based on this method, continuous Trichel pulses are calculated on about a 100 us timescale, and microcosmic physicochemical process of negative DC corona discharge in three different periods is discussed. The obtained results show that the amplitude of Trichel pulses is between 1-2 mA, and that pulse interval is in the order of 10-5 s. The positive ions produced by avalanche ionization enhanced the electric field near the cathode at the beginning of the pulse, then disappeared from the surface of cathode. The electric field decreases and the pulse ceases to develop. The negative ions produced by attachment slowly move away from the cathode, and the electric field increases gradually until the next pulse begins to develop. The positive and negative ions with the highest density during the corona discharge process are O4+ and O3- , respectively.

  18. Numerical estimation of ultrasonic production of hydrogen: Effect of ideal and real gas based models.

    Science.gov (United States)

    Kerboua, Kaouther; Hamdaoui, Oualid

    2018-01-01

    Based on two different assumptions regarding the equation describing the state of the gases within an acoustic cavitation bubble, this paper studies the sonochemical production of hydrogen, through two numerical models treating the evolution of a chemical mechanism within a single bubble saturated with oxygen during an oscillation cycle in water. The first approach is built on an ideal gas model, while the second one is founded on Van der Waals equation, and the main objective was to analyze the effect of the considered state equation on the ultrasonic hydrogen production retrieved by simulation under various operating conditions. The obtained results show that even when the second approach gives higher values of temperature, pressure and total free radicals production, yield of hydrogen does not follow the same trend. When comparing the results released by both models regarding hydrogen production, it was noticed that the ratio of the molar amount of hydrogen is frequency and acoustic amplitude dependent. The use of Van der Waals equation leads to higher quantities of hydrogen under low acoustic amplitude and high frequencies, while employing ideal gas law based model gains the upper hand regarding hydrogen production at low frequencies and high acoustic amplitudes. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Micro-mechanics based damage mechanics for 3D Orthogonal Woven Composites: Experiment and Numerical Modelling

    KAUST Repository

    Saleh, Mohamed Nasr

    2016-01-08

    Damage initiation and evolution of three-dimensional (3D) orthogonal woven carbon fibre composite (3DOWC) is investigated experimentally and numerically. Meso-scale homogenisation of the representative volume element (RVE) is utilised to predict the elastic properties, simulate damage initiation and evolution when loaded in tension. The effect of intra-yarns transverse cracking and shear diffused damage on the in-plane transverse modulus and shear modulus is investigated while one failure criterion is introduced to simulate the matrix damage. The proposed model is based on two major assumptions. First, the effect of the binder yarns, on the in-plane properties, is neglected, so the 3DOWC unit cell can be approximated as a (0o/90o) cross-ply laminate. Second, a micro-mechanics based damage approach is used at the meso-scale, so damage indicators can be correlated, explicitly, to the density of cracks within the material. Results from the simulated RVE are validated against experimental results along the warp (0o direction) and weft (90o direction). This approach paves the road for more predictive models as damage evolution laws are obtained from micro mechanical considerations and rely on few well-defined material parameters. This largely differs from classical damage mechanics approaches in which the evolution law is obtained by retrofitting experimental observations.

  20. Micro-mechanics based damage mechanics for 3D Orthogonal Woven Composites: Experiment and Numerical Modelling

    KAUST Repository

    Saleh, Mohamed Nasr; Lubineau, Gilles; Potluri, Prasad; Withers, Philip; Soutis, Constantinos

    2016-01-01

    Damage initiation and evolution of three-dimensional (3D) orthogonal woven carbon fibre composite (3DOWC) is investigated experimentally and numerically. Meso-scale homogenisation of the representative volume element (RVE) is utilised to predict the elastic properties, simulate damage initiation and evolution when loaded in tension. The effect of intra-yarns transverse cracking and shear diffused damage on the in-plane transverse modulus and shear modulus is investigated while one failure criterion is introduced to simulate the matrix damage. The proposed model is based on two major assumptions. First, the effect of the binder yarns, on the in-plane properties, is neglected, so the 3DOWC unit cell can be approximated as a (0o/90o) cross-ply laminate. Second, a micro-mechanics based damage approach is used at the meso-scale, so damage indicators can be correlated, explicitly, to the density of cracks within the material. Results from the simulated RVE are validated against experimental results along the warp (0o direction) and weft (90o direction). This approach paves the road for more predictive models as damage evolution laws are obtained from micro mechanical considerations and rely on few well-defined material parameters. This largely differs from classical damage mechanics approaches in which the evolution law is obtained by retrofitting experimental observations.

  1. Evaluation of physics-based numerical modelling for diverse design architecture of perovskite solar cells

    Science.gov (United States)

    Mishra, A. K.; Catalan, Jorge; Camacho, Diana; Martinez, Miguel; Hodges, D.

    2017-08-01

    Solution processed organic-inorganic metal halide perovskite based solar cells are emerging as a new cost effective photovoltaic technology. In the context of increasing the power conversion efficiency (PCE) and sustainability of perovskite solar cells (PSC) devices, we comprehensively analyzed a physics-based numerical modelling for doped and un-doped PSC devices. Our analytics emphasized the role of different charge carrier layers from the view point of interfacial adhesion and its influence on charge extraction rate and charge recombination mechanism. Morphological and charge transport properties of perovskite thin film as a function of device architecture are also considered to investigate the photovoltaic properties of PSC. We observed that photocurrent is dominantly influenced by interfacial recombination process and photovoltage has functional relationship with defect density of perovskite absorption layer. A novel contour mapping method to understand the characteristics of current density-voltage (J-V) curves for each device as a function of perovskite layer thickness provide an important insight about the distribution spectrum of photovoltaic properties. Functional relationship of device efficiency and fill factor with absorption layer thickness are also discussed.

  2. Numerical simulation of transitional flow on a wind turbine airfoil with RANS-based transition model

    Science.gov (United States)

    Zhang, Ye; Sun, Zhengzhong; van Zuijlen, Alexander; van Bussel, Gerard

    2017-09-01

    This paper presents a numerical investigation of transitional flow on the wind turbine airfoil DU91-W2-250 with chord-based Reynolds number Rec = 1.0 × 106. The Reynolds-averaged Navier-Stokes based transition model using laminar kinetic energy concept, namely the k - kL - ω model, is employed to resolve the boundary layer transition. Some ambiguities for this model are discussed and it is further implemented into OpenFOAM-2.1.1. The k - kL - ω model is first validated through the chosen wind turbine airfoil at the angle of attack (AoA) of 6.24° against wind tunnel measurement, where lift and drag coefficients, surface pressure distribution and transition location are compared. In order to reveal the transitional flow on the airfoil, the mean boundary layer profiles in three zones, namely the laminar, transitional and fully turbulent regimes, are investigated. Observation of flow at the transition location identifies the laminar separation bubble. The AoA effect on boundary layer transition over wind turbine airfoil is also studied. Increasing the AoA from -3° to 10°, the laminar separation bubble moves upstream and reduces in size, which is in close agreement with wind tunnel measurement.

  3. Prostate cancer risk prediction based on complete prostate cancer family history

    OpenAIRE

    Albright, Frederick; Stephenson, Robert A; Agarwal, Neeraj; Teerlink, Craig C; Lowrance, William T; Farnham, James M; Albright, Lisa A Cannon

    2014-01-01

    Background Prostate cancer (PC) relative risks (RRs) are typically estimated based on status of close relatives or presence of any affected relatives. This study provides RR estimates using extensive and specific PC family history. Methods A retrospective population-based study was undertaken to estimate RRs for PC based on complete family history of PC. A total of 635,443 males, all with ancestral genealogy data, were analyzed. RRs for PC were determined based upon PC rates estimated from ma...

  4. Numerical Simulations of Slow Stick Slip Events with PFC, a DEM Based Code

    Science.gov (United States)

    Ye, S. H.; Young, R. P.

    2017-12-01

    Nonvolcanic tremors around subduction zone have become a fascinating subject in seismology in recent years. Previous studies have shown that the nonvolcanic tremor beneath western Shikoku is composed of low frequency seismic waves overlapping each other. This finding provides direct link between tremor and slow earthquakes. Slow stick slip events are considered to be laboratory scaled slow earthquakes. Slow stick slip events are traditionally studied with direct shear or double direct shear experiment setup, in which the sliding velocity can be controlled to model a range of fast and slow stick slips. In this study, a PFC* model based on double direct shear is presented, with a central block clamped by two side blocks. The gauge layers between the central and side blocks are modelled as discrete fracture networks with smooth joint bonds between pairs of discrete elements. In addition, a second model is presented in this study. This model consists of a cylindrical sample subjected to triaxial stress. Similar to the previous model, a weak gauge layer at a 45 degrees is added into the sample, on which shear slipping is allowed. Several different simulations are conducted on this sample. While the confining stress is maintained at the same level in different simulations, the axial loading rate (displacement rate) varies. By varying the displacement rate, a range of slipping behaviour, from stick slip to slow stick slip are observed based on the stress-strain relationship. Currently, the stick slip and slow stick slip events are strictly observed based on the stress-strain relationship. In the future, we hope to monitor the displacement and velocity of the balls surrounding the gauge layer as a function of time, so as to generate a synthetic seismogram. This will allow us to extract seismic waveforms and potentially simulate the tremor-like waves found around subduction zones. *Particle flow code, a discrete element method based numerical simulation code developed by

  5. MATHEMATICAL MODELING AND NUMERICAL SOLUTION OF IRON CORROSION PROBLEM BASED ON CONDENSATION CHEMICAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Basuki Widodo

    2012-02-01

    Full Text Available Corrosion process is a natural case that happened at the various metals, where the corrosion process in electrochemical can be explained by using galvanic cell. The iron corrosion process is based on the acidity degree (pH of a condensation, iron concentration and condensation temperature of electrolyte. Those are applied at electrochemistry cell. The iron corrosion process at this electrochemical cell also able to generate electrical potential and electric current during the process takes place. This paper considers how to build a mathematical model of iron corrosion, electrical potential and electric current. The mathematical model further is solved using the finite element method. This iron corrosion model is built based on the iron concentration, condensation temperature, and iteration time applied. In the electric current density model, the current based on electric current that is happened at cathode and anode pole and the iteration time applied. Whereas on the potential  electric model, it is based on the beginning of electric potential and the iteration time applied. The numerical results show that the part of iron metal, that is gristle caused by corrosion, is the part of metal that has function as anode and it has some influences, such as time depth difference, iron concentration and condensation temperature on the iron corrosion process and the sum of reduced mass during corrosion process. Moreover, difference influence of time and beginning electric potential has an effect on the electric potential, which emerges during corrosion process at the electrochemical cell. Whereas, at the electrical current is also influenced by difference of depth time and condensation temperature applied.Keywords: Iron Corrosion, Concentration of iron, Electrochemical Cell and Finite Element Method

  6. When Military Parents Come Home: Building "Strong Families Strong Forces," a Home-Based Intervention for Military Families with Very Young Children

    Science.gov (United States)

    Paris, Ruth; Acker, Michelle L.; Ross, Abigail M.; DeVoe, Ellen R.

    2011-01-01

    The long wars in Afghanistan and Iraq have presented unique challenges to military-connected families with very young children, yet few evidence-based services are available to support these families through deployment and reintegration. Although many military families have shown remarkable resilience throughout the intense demands of the wars,…

  7. A GIS-based numerical simulation of the March 2014 Oso landslide fluidized motion

    Science.gov (United States)

    Fukuoka, H.; Ogbonnaya, I.; Wang, C.

    2014-12-01

    Sliding and flowing are the major movement type after slope failures. Landslides occur when slope-froming material moves downhill after failing along a sliding surface. Most debris flows originally occur in the form of rainfall-induced landslides before they move into valley channel. Landslides that mobilize into debris flows usually are characterized by high-speed movement and long run-out distance and may present the greatest risk to human life. The 22 March 2014 Oso landslide is a typical case of landside transformint to debris flow. The landslide was triggered on the edge of a plateau about 200 m high composed of glacial sediments after excessive prolonged rainfall of 348 in March 2014. After its initiation, portions of the landslide materials transitioned into a rapidly moving debris flow which traveled long distances across the downslope floodplain. U.S. Geological Survey estimated the volume of the slide to be about 7 million m3, and it traveled about 1 km from the toe of the slope. The apparent friction angle measured by the energy line drawn from the crown of the head scarp to the toe of the deposits which reached largest distance, was only 5~6 degrees. we performed two numerical modeling to predicting the runout distance and to get insight into the behaviour of the landslide movement. One is GIS-based revised Hovland's 3D limit equilibrium model which is used to simulate the movement and stoppage of a landslide. In this research, sliding is defined by a slip surface which cuts through the slope, causing the mass of earth to move above it. The factor of safety will be calculated step by step during the sliding process simulation. Stoppage is defined by the factor of safety much greater than one and the velocity equal zero. The other is GIS-based depth-averaged 2D numerical model using a coupled viscous and Coulomb type law to simulate a debris flow from initiation to deposition. We compared our simulaiton results with the results of preliminary computer

  8. An Empirical Study on the Moderate Scale of Food-production-based Family Farm in Guangxi

    Institute of Scientific and Technical Information of China (English)

    Yaogui WU

    2016-01-01

    The moderate scale family farm is the future agricultural business entity in China,and the scale of family farm is a key factor affecting its development.With Guigang City in Guangxi as a point for the study,from the perspective of maximizing income of rural households,this paper uses production function model to calculate the moderate scale of food-production-based family farm at 5.7 ha,and makes policy recommendations.

  9. Experimental and numerical studies on liquid wicking into filter papers for paper-based diagnostics

    International Nuclear Information System (INIS)

    Liu, Zhi; Hu, Jie; Zhao, Yimeng; Qu, Zhiguo; Xu, Feng

    2015-01-01

    Paper-based diagnostics have shown promising potential applications in human disease surveillance and food safety analysis at the point-of-care (POC). The liquid wicking behavior in diagnostic fibrous paper plays an important role in development of paper-based diagnostics. In the current study, we performed experimental and numerical research on the liquid wicking height and mass with three width strips into filter paper. The effective porosity could be conveniently measured in the light of the linear correlation between wicking height and mass by the experimental system. A modified model with considering evaporation effect was proposed to predict wicking height and mass. The predicted wicking height and mass using the evaporation model was much closer to the experimental data compared with the model without evaporation. The wicking speed initially decreased significantly and then maintained at a constant value at lower level. The evaporation effect tends to reduce the wicking flow speed. More wicking mass could be obtained at larger strip width but the corresponding reagent loss became significant. The proposed model with evaporation paved a way to understanding the fundamental of fluid flow in diagnostic paper and was essential to provide meaningful and useful reference for the research and development of paper-based diagnostics devices. - Highlights: • A model with considering evaporation was proposed to predict wicking height and mass. • Flow characteristics of filter paper were experimentally and theoretically studied. • Effective porosity could be conveniently measured by the experimental platform. • The evaporation effect tended to reduce the wicking flow speed

  10. INS VNTR is not associated with childhood obesity in 1,023 families: a family-based study.

    Science.gov (United States)

    Bouatia-Naji, Nabila; De Graeve, Franck; Brönner, Günter; Lecoeur, Cécile; Vatin, Vincent; Durand, Emmanuelle; Lichtner, Peter; Nguyen, Thuy T; Heude, Barbara; Weill, Jacques; Lévy-Marchal, Claire; Hebebrand, Johannes; Froguel, Philippe; Meyre, David

    2008-06-01

    Previous studies have described genetic associations of the insulin gene variable number tandem repeat (INS VNTR) variant with childhood obesity and associated phenotypes. We aimed to assess the contribution of INS VNTR genotypes to childhood obesity and variance of insulin resistance, insulin secretion, and birth weight using family-based design. Participants were either French or German whites. We used transmission disequilibrium tests (TDTs) for assessing binary traits and quantitative pedigree disequilibrium tests for assessing continuous traits. In contrast to previous findings, we did not observe any familial association with childhood obesity (T = 50%, P = 0.77) in the 1,023 families tested. In French obese children, INS VNTR did not associate with fasting insulin levels (P = 0.23) and class I allele showed only borderline association with increased insulin secretion index at 30 min (P = 0.03). INS VNTR did not associate with birth weight in obese children (P = 0.98) and TDT analyses in 350 French families with history of low birth weight (LBW) showed no association with this condition (P = 0.92). In summary, our study, the largest performed so far, does not support the previously reported associations between INS VNTR and childhood obesity, insulin resistance, or birth weight, and does not suggest any major role for this variant in modulating these traits.

  11. Numerical simulation of diffuse double layer around microporous electrodes based on the Poisson–Boltzmann equation

    International Nuclear Information System (INIS)

    Kitazumi, Yuki; Shirai, Osamu; Yamamoto, Masahiro; Kano, Kenji

    2013-01-01

    Graphical abstract: - Highlights: • Diffuse double layers overlap with each other in the micropore. • The overlapping of the diffuse double layer affects the double layer capacitance. • The electric field becomes weak in the micropore. • The electroneutrality is unsatisfactory in the micropore. - Abstract: The structure of the diffuse double layer around a nm-sized micropore on porous electrodes has been studied by numerical simulation using the Poisson–Boltzmann equation. The double layer capacitance of the microporous electrode strongly depends on the electrode potential, the electrolyte concentration, and the size of the micropore. The potential and the electrolyte concentration dependence of the capacitance is different from that of the planner electrode based on the Gouy's theory. The overlapping of the diffuse double layer becomes conspicuous in the micropore. The overlapped diffuse double layer provides the mild electric field. The intensified electric field exists at the rim of the orifice of the micropore because of the expansion of the diffuse double layers. The characteristic features of microporous electrodes are caused by the heterogeneity of the electric field around the micropores

  12. MATSIM -The Development and Validation of a Numerical Voxel Model based on the MATROSHKA Phantom

    Science.gov (United States)

    Beck, Peter; Rollet, Sofia; Berger, Thomas; Bergmann, Robert; Hajek, Michael; Latocha, Marcin; Vana, Norbert; Zechner, Andrea; Reitz, Guenther

    The AIT Austrian Institute of Technology coordinates the project MATSIM (MATROSHKA Simulation) in collaboration with the Vienna University of Technology and the German Aerospace Center. The aim of the project is to develop a voxel-based model of the MATROSHKA anthro-pomorphic torso used at the International Space Station (ISS) as foundation to perform Monte Carlo high-energy particle transport simulations for different irradiation conditions. Funded by the Austrian Space Applications Programme (ASAP), MATSIM is a co-investigation with the European Space Agency (ESA) ELIPS project MATROSHKA, an international collaboration of more than 18 research institutes and space agencies from all over the world, under the science and project lead of the German Aerospace Center. The MATROSHKA facility is designed to determine the radiation exposure of an astronaut onboard ISS and especially during an ex-travehicular activity. The numerical model developed in the frame of MATSIM is validated by reference measurements. In this report we give on overview of the model development and compare photon and neutron irradiations of the detector-equipped phantom torso with Monte Carlo simulations using FLUKA. Exposure to Co-60 photons was realized in the standard ir-radiation laboratory at Seibersdorf, while investigations with neutrons were performed at the thermal column of the Vienna TRIGA Mark-II reactor. The phantom was loaded with passive thermoluminescence dosimeters. In addition, first results of the calculated dose distribution within the torso are presented for a simulated exposure in low-Earth orbit.

  13. Numerical model and analysis of an energy-based system using microwaves for vision correction

    Science.gov (United States)

    Pertaub, Radha; Ryan, Thomas P.

    2009-02-01

    A treatment system was developed utilizing a microwave-based procedure capable of treating myopia and offering a less invasive alternative to laser vision correction without cutting the eye. Microwave thermal treatment elevates the temperature of the paracentral stroma of the cornea to create a predictable refractive change while preserving the epithelium and deeper structures of the eye. A pattern of shrinkage outside of the optical zone may be sufficient to flatten the central cornea. A numerical model was set up to investigate both the electromagnetic field and the resultant transient temperature distribution. A finite element model of the eye was created and the axisymmetric distribution of temperature calculated to characterize the combination of controlled power deposition combined with surface cooling to spare the epithelium, yet shrink the cornea, in a circularly symmetric fashion. The model variables included microwave power levels and pulse width, cooling timing, dielectric material and thickness, and electrode configuration and gap. Results showed that power is totally contained within the cornea and no significant temperature rise was found outside the anterior cornea, due to the near-field design of the applicator and limited thermal conduction with the short on-time. Target isothermal regions were plotted as a result of common energy parameters along with a variety of electrode shapes and sizes, which were compared. Dose plots showed the relationship between energy and target isothermic regions.

  14. Numerical flow models and their calibration using tracer based ages: Chapter 10

    Science.gov (United States)

    Sanford, W.

    2013-01-01

    Any estimate of ‘age’ of a groundwater sample based on environmental tracers requires some form of geochemical model to interpret the tracer chemistry (chapter 3) and is, therefore, referred to in this chapter as a tracer model age. the tracer model age of a groundwater sample can be useful for obtaining information on the residence time and replenishment rate of an aquifer system, but that type of data is most useful when it can be incorporated with all other information that is known about the groundwater system under study. groundwater fl ow models are constructed of aquifer systems because they are usually the best way of incorporating all of the known information about the system in the context of a mathematical framework that constrains the model to follow the known laws of physics and chemistry as they apply to groundwater flow and transport. It is important that the purpose or objective of the study be identified first before choosing the type and complexity of the model to be constructed, and to make sure such a model is necessary. The purpose of a modelling study is most often to characterize the system within a numerical framework, such that the hydrological responses of the system can be tested under potential stresses that might be imposed given future development scenarios. As this manual discusses dating as it applies to old groundwater, most readers are likely to be interested in studying regional groundwater flow systems and their water resource potential.

  15. Multi-dimensional scavenging analysis of a free-piston linear alternator based on numerical simulation

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Jinlong; Zuo, Zhengxing; Li, Wen; Feng, Huihua [School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081 (China)

    2011-04-15

    A free-piston linear alternator (FPLA) is being developed by the Beijing Institute of Technology to improve the thermal efficiency relative to conventional crank-driven engines. A two-stroke scavenging process recharges the engine and is crucial to realizing the continuous operation of a free-piston engine. In order to study the FPLA scavenging process, the scavenging system was configured using computational fluid dynamics. As the piston dynamics of the FPLA are different to conventional crank-driven two-stroke engines, a time-based numerical simulation program was built using Matlab to define the piston's motion profiles. A wide range of design and operating options were investigated including effective stroke length, valve overlapping distance, operating frequency and charging pressure to find out their effects on the scavenging performance. The results indicate that a combination of high effective stroke length to bore ratio and long valve overlapping distance with a low supercharging pressure has the potential to achieve high scavenging and trapping efficiencies with low short-circuiting losses. (author)

  16. The human otitis media with effusion: a numerical-based study.

    Science.gov (United States)

    Areias, B; Parente, M P L; Santos, C; Gentil, F; Natal Jorge, R M

    2017-07-01

    Otitis media is a group of inflammatory diseases of the middle ear. Acute otitis media and otitis media with effusion (OME) are its two main types of manifestation. Otitis media is common in children and can result in structural alterations in the middle ear which will lead to hearing losses. This work studies the effects of an OME on the sound transmission from the external auditory meatus to the inner ear. The finite element method was applied on the present biomechanical study. The numerical model used in this work was built based on the geometrical information obtained from The visible ear project. The present work explains the mechanisms by which the presence of fluid in the middle ear affects hearing by calculating the magnitude, phase and reduction of the normalized umbo velocity and also the magnitude and phase of the normalized stapes velocity. A sound pressure level of 90 dB SPL was applied at the tympanic membrane. The harmonic analysis was performed with the auditory frequency varying from 100 Hz to 10 kHz. A decrease in the response of the normalized umbo and stapes velocity as the tympanic cavity was filled with fluid was obtained. The decrease was more accentuated at the umbo.

  17. Cell light scattering characteristic numerical simulation research based on FDTD algorithm

    Science.gov (United States)

    Lin, Xiaogang; Wan, Nan; Zhu, Hao; Weng, Lingdong

    2017-01-01

    In this study, finite-difference time-domain (FDTD) algorithm has been used to work out the cell light scattering problem. Before beginning to do the simulation contrast, finding out the changes or the differences between normal cells and abnormal cells which may be cancerous or maldevelopment is necessary. The preparation of simulation are building up the simple cell model of cell which consists of organelles, nucleus and cytoplasm and setting up the suitable precision of mesh. Meanwhile, setting up the total field scattering field source as the excitation source and far field projection analysis group is also important. Every step need to be explained by the principles of mathematic such as the numerical dispersion, perfect matched layer boundary condition and near-far field extrapolation. The consequences of simulation indicated that the position of nucleus changed will increase the back scattering intensity and the significant difference on the peak value of scattering intensity may result from the changes of the size of cytoplasm. The study may help us find out the regulations based on the simulation consequences and the regulations can be meaningful for early diagnosis of cancers.

  18. An Energy-Efficient Cluster-Based Vehicle Detection on Road Network Using Intention Numeration Method

    Directory of Open Access Journals (Sweden)

    Deepa Devasenapathy

    2015-01-01

    Full Text Available The traffic in the road network is progressively increasing at a greater extent. Good knowledge of network traffic can minimize congestions using information pertaining to road network obtained with the aid of communal callers, pavement detectors, and so on. Using these methods, low featured information is generated with respect to the user in the road network. Although the existing schemes obtain urban traffic information, they fail to calculate the energy drain rate of nodes and to locate equilibrium between the overhead and quality of the routing protocol that renders a great challenge. Thus, an energy-efficient cluster-based vehicle detection in road network using the intention numeration method (CVDRN-IN is developed. Initially, sensor nodes that detect a vehicle are grouped into separate clusters. Further, we approximate the strength of the node drain rate for a cluster using polynomial regression function. In addition, the total node energy is estimated by taking the integral over the area. Finally, enhanced data aggregation is performed to reduce the amount of data transmission using digital signature tree. The experimental performance is evaluated with Dodgers loop sensor data set from UCI repository and the performance evaluation outperforms existing work on energy consumption, clustering efficiency, and node drain rate.

  19. An energy-efficient cluster-based vehicle detection on road network using intention numeration method.

    Science.gov (United States)

    Devasenapathy, Deepa; Kannan, Kathiravan

    2015-01-01

    The traffic in the road network is progressively increasing at a greater extent. Good knowledge of network traffic can minimize congestions using information pertaining to road network obtained with the aid of communal callers, pavement detectors, and so on. Using these methods, low featured information is generated with respect to the user in the road network. Although the existing schemes obtain urban traffic information, they fail to calculate the energy drain rate of nodes and to locate equilibrium between the overhead and quality of the routing protocol that renders a great challenge. Thus, an energy-efficient cluster-based vehicle detection in road network using the intention numeration method (CVDRN-IN) is developed. Initially, sensor nodes that detect a vehicle are grouped into separate clusters. Further, we approximate the strength of the node drain rate for a cluster using polynomial regression function. In addition, the total node energy is estimated by taking the integral over the area. Finally, enhanced data aggregation is performed to reduce the amount of data transmission using digital signature tree. The experimental performance is evaluated with Dodgers loop sensor data set from UCI repository and the performance evaluation outperforms existing work on energy consumption, clustering efficiency, and node drain rate.

  20. Numerical study of natural convection in a horizontal cylinder filled with water-based alumina nanofluid.

    Science.gov (United States)

    Meng, Xiangyin; Li, Yan

    2015-01-01

    Natural heat convection of water-based alumina (Al2O3/water) nanofluids (with volume fraction 1% and 4%) in a horizontal cylinder is numerically investigated. The whole three-dimensional computational fluid dynamics (CFD) procedure is performed in a completely open-source way. Blender, enGrid, OpenFOAM and ParaView are employed for geometry creation, mesh generation, case simulation and post process, respectively. Original solver 'buoyantBoussinesqSimpleFoam' is selected for the present study, and a temperature-dependent solver 'buoyantBoussinesqSimpleTDFoam' is developed to ensure the simulation is more realistic. The two solvers are used for same cases and compared to corresponding experimental results. The flow regime in these cases is laminar (Reynolds number is 150) and the Rayleigh number range is 0.7 × 10(7) ~ 5 × 10(7). By comparison, the average natural Nusselt numbers of water and Al2O3/water nanofluids are found to increase with the Rayleigh number. At the same Rayleigh number, the Nusselt number is found to decrease with nanofluid volume fraction. The temperature-dependent solver is found better for water and 1% Al2O3/water nanofluid cases, while the original solver is better for 4% Al2O3/water nanofluid cases. Furthermore, due to strong three-dimensional flow features in the horizontal cylinder, three-dimensional CFD simulation is recommended instead of two-dimensional simplifications.

  1. Numerical Investigation on Electron and Ion Transmission of GEM-based Detectors

    Directory of Open Access Journals (Sweden)

    Bhattacharya Purba

    2018-01-01

    Full Text Available ALICE at the LHC is planning a major upgrade of its detector systems, including the TPC, to cope with an increase of the LHC luminosity after 2018. Different R&D activities are currently concentrated on the adoption of the Gas Electron Multiplier (GEM as the gas amplification stage of the ALICE-TPC upgrade version. The major challenge is to have low ion feedback in the drift volume as well as to ensure a collection of good percentage of primary electrons in the signal generation process. In the present work, Garfield simulation framework has been adopted to numerically estimate the electron transparency and ion backflow fraction of GEM-based detectors. In this process, extensive simulations have been carried out to enrich our understanding of the complex physical processes occurring within single, triple and quadruple GEM detectors. A detailed study has been performed to observe the effect of detector geometry, field configuration and magnetic field on the above mentioned characteristics.

  2. Elastic full waveform inversion based on the homogenization method: theoretical framework and 2-D numerical illustrations

    Science.gov (United States)

    Capdeville, Yann; Métivier, Ludovic

    2018-05-01

    Seismic imaging is an efficient tool to investigate the Earth interior. Many of the different imaging techniques currently used, including the so-called full waveform inversion (FWI), are based on limited frequency band data. Such data are not sensitive to the true earth model, but to a smooth version of it. This smooth version can be related to the true model by the homogenization technique. Homogenization for wave propagation in deterministic media with no scale separation, such as geological media, has been recently developed. With such an asymptotic theory, it is possible to compute an effective medium valid for a given frequency band such that effective waveforms and true waveforms are the same up to a controlled error. In this work we make the link between limited frequency band inversion, mainly FWI, and homogenization. We establish the relation between a true model and an FWI result model. This relation is important for a proper interpretation of FWI images. We numerically illustrate, in the 2-D case, that an FWI result is at best the homogenized version of the true model. Moreover, it appears that the homogenized FWI model is quite independent of the FWI parametrization, as long as it has enough degrees of freedom. In particular, inverting for the full elastic tensor is, in each of our tests, always a good choice. We show how the homogenization can help to understand FWI behaviour and help to improve its robustness and convergence by efficiently constraining the solution space of the inverse problem.

  3. Science-Based Approach for Advancing Marine and Hydrokinetic Energy: Integrating Numerical Simulations with Experiments

    Science.gov (United States)

    Sotiropoulos, F.; Kang, S.; Chamorro, L. P.; Hill, C.

    2011-12-01

    The field of MHK energy is still in its infancy lagging approximately a decade or more behind the technology and development progress made in wind energy engineering. Marine environments are characterized by complex topography and three-dimensional (3D) turbulent flows, which can greatly affect the performance and structural integrity of MHK devices and impact the Levelized Cost of Energy (LCoE). Since the deployment of multi-turbine arrays is envisioned for field applications, turbine-to-turbine interactions and turbine-bathymetry interactions need to be understood and properly modeled so that MHK arrays can be optimized on a site specific basis. Furthermore, turbulence induced by MHK turbines alters and interacts with the nearby ecosystem and could potentially impact aquatic habitats. Increased turbulence in the wake of MHK devices can also change the shear stress imposed on the bed ultimately affecting the sediment transport and suspension processes in the wake of these structures. Such effects, however, remain today largely unexplored. In this work a science-based approach integrating state-of-the-art experimentation with high-resolution computational fluid dynamics is proposed as a powerful strategy for optimizing the performance of MHK devices and assessing environmental impacts. A novel numerical framework is developed for carrying out Large-Eddy Simulation (LES) in arbitrarily complex domains with embedded MHK devices. The model is able to resolve the geometrical complexity of real-life MHK devices using the Curvilinear Immersed Boundary (CURVIB) method along with a wall model for handling the flow near solid surfaces. Calculations are carried out for an axial flow hydrokinetic turbine mounted on the bed of rectangular open channel on a grid with nearly 200 million grid nodes. The approach flow corresponds to fully developed turbulent open channel flow and is obtained from a separate LES calculation. The specific case corresponds to that studied

  4. Numerical Upscaling of Solute Transport in Fractured Porous Media Based on Flow Aligned Blocks

    Science.gov (United States)

    Leube, P.; Nowak, W.; Sanchez-Vila, X.

    2013-12-01

    High-contrast or fractured-porous media (FPM) pose one of the largest unresolved challenges for simulating large hydrogeological systems. The high contrast in advective transport between fast conduits and low-permeability rock matrix, including complex mass transfer processes, leads to the typical complex characteristics of early bulk arrivals and long tailings. Adequate direct representation of FPM requires enormous numerical resolutions. For large scales, e.g. the catchment scale, and when allowing for uncertainty in the fracture network architecture or in matrix properties, computational costs quickly reach an intractable level. In such cases, multi-scale simulation techniques have become useful tools. They allow decreasing the complexity of models by aggregating and transferring their parameters to coarser scales and so drastically reduce the computational costs. However, these advantages come at a loss of detail and accuracy. In this work, we develop and test a new multi-scale or upscaled modeling approach based on block upscaling. The novelty is that individual blocks are defined by and aligned with the local flow coordinates. We choose a multi-rate mass transfer (MRMT) model to represent the remaining sub-block non-Fickian behavior within these blocks on the coarse scale. To make the scale transition simple and to save computational costs, we capture sub-block features by temporal moments (TM) of block-wise particle arrival times to be matched with the MRMT model. By predicting spatial mass distributions of injected tracers in a synthetic test scenario, our coarse-scale solution matches reasonably well with the corresponding fine-scale reference solution. For predicting higher TM-orders (such as arrival time and effective dispersion), the prediction accuracy steadily decreases. This is compensated to some extent by the MRMT model. If the MRMT model becomes too complex, it loses its effect. We also found that prediction accuracy is sensitive to the choice of

  5. Psychotic disorder and educational achievement: a family-based analysis.

    Science.gov (United States)

    Frissen, Aleida; Lieverse, Ritsaert; Marcelis, Machteld; Drukker, Marjan; Delespaul, Philippe

    2015-10-01

    Early social and cognitive alterations in psychotic disorder, associated with familial liability and environmental exposures, may contribute to lower than expected educational achievement. The aims of the present study were to investigate (1) how differences in educational level between parents and their children vary across patients, their healthy siblings, and healthy controls (effect familial liability), and across two environmental risk factors for psychotic disorder: childhood trauma and childhood urban exposure (effect environment) and (2) to what degree the association between familial liability and educational differential was moderated by the environmental exposures. Patients with a diagnosis of non-affective psychotic disorder (n = 629), 552 non-psychotic siblings and 326 healthy controls from the Netherlands and Belgium were studied. Participants reported their highest level of education and that of their parents. Childhood trauma was assessed with the Dutch version of the Childhood Trauma Questionnaire-Short Form. Urban exposure, expressed as population density, was rated across five levels. Overall, participants had a higher level of education than their parents. This difference was significantly reduced in the patient group, and the healthy siblings displayed intergenerational differences that were in between those of controls and patients. Higher levels of childhood urban exposure were also associated with a smaller intergenerational educational differential. There was no evidence for differential sensitivity to childhood trauma and childhood urbanicity across the three groups. Intergenerational difference in educational achievements is decreased in patients with psychotic disorder and to a lesser extent in siblings of patients with psychotic disorder, and across higher levels of childhood urban exposure. More research is required to better understand the dynamics between early social and cognitive alterations in those at risk in relation to progress

  6. Numerical algorithms based on Galerkin methods for the modeling of reactive interfaces in photoelectrochemical (PEC) solar cells

    Science.gov (United States)

    Harmon, Michael; Gamba, Irene M.; Ren, Kui

    2016-12-01

    This work concerns the numerical solution of a coupled system of self-consistent reaction-drift-diffusion-Poisson equations that describes the macroscopic dynamics of charge transport in photoelectrochemical (PEC) solar cells with reactive semiconductor and electrolyte interfaces. We present three numerical algorithms, mainly based on a mixed finite element and a local discontinuous Galerkin method for spatial discretization, with carefully chosen numerical fluxes, and implicit-explicit time stepping techniques, for solving the time-dependent nonlinear systems of partial differential equations. We perform computational simulations under various model parameters to demonstrate the performance of the proposed numerical algorithms as well as the impact of these parameters on the solution to the model.

  7. Engaging the Community Cultural Wealth of Latino Immigrant Families in a Community-Based Program

    Science.gov (United States)

    Gil, Elizabeth

    2017-01-01

    The purpose of this qualitative case study utilizing ethnographic methods was to understand how family members' participation in Digital Home, a community-based technology program in an urban mid-sized Midwestern city, built on and fostered Latino immigrant families' community cultural wealth (Yosso, 2005) in order to increase their abilities to…

  8. Preventing Family and Educational Disconnection through Wilderness-Based Therapy Targeting Youth at Risk

    Science.gov (United States)

    Ronalds, Lisa; Allen-Craig, Sandy

    2008-01-01

    In an effort to address the issue of youth homelessness in Australia, Regional Extended Family Services (REFS) have developed a wilderness-based therapeutic intervention. REFS aim to provide early intervention services for young people at risk of homelessness, and their families. This study examined the outcomes of the REFS wilderness program by…

  9. The Construction of Job Families Based on Company Specific PAQ Job Dimensions.

    Science.gov (United States)

    Taylor, L. R.; Colbert, G. A.

    1978-01-01

    Research is presented on the construction of job families based on Position Analysis Questionnaire data. The data were subjected to a component analysis. Results were interpreted as sufficiently encouraging to proceed with analyses of validity generalization within the job families. (Editor/RK)

  10. A Family-Based Intervention for Preschoolers: Evaluating Sibling Outcomes. Data Trends #130

    Science.gov (United States)

    Research and Training Center on Family Support and Children's Mental Health, 2006

    2006-01-01

    "Data Trends" reports present summaries of research on mental health services for children and adolescents and their families. The article summarized in this "Data Trends" discusses family-based interventions and how they may have both direct and indirect effects. While the measurement of direct outcomes for a targeted group is important, a…

  11. Numerical analysis of thermo-hydro-mechanical (THM) processes in the clay based material

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xuerui

    2016-10-06

    Clay formations are investigated worldwide as potential host rock for the deep geological disposal of high-level radioactive waste (HLW). Usually bentonite is preferred as the buffer and backfill material in the disposal system. In the disposal of HLW, heat emission is one of the most important issues as it can generate a series of complex thermo-hydro-mechanical (THM) processes in the surrounding materials and thus change the material properties. In the context of safety assessment, it is important to understand the thermally induced THM interactions and the associated change in material properties. In this work, the thermally induced coupled THM behaviours in the clay host rock and in the bentonite buffer as well as the corresponding coupling effects among the relevant material properties are numerically analysed. A coupled non-isothermal Richards flow mechanical model and a non-isothermal multiphase flow model were developed based on the scientific computer codes OpenGeoSys (OGS). Heat transfer in the porous media is governed by thermal conduction and advective flow of the pore fluids. Within the hydraulic processes, evaporation, vapour diffusion, and the unsaturated flow field are considered. Darcy's law is used to describe the advective flux of gas and liquid phases. The relative permeability of each phase is considered. The elastic deformation process is modelled by the generalized Hooke's law complemented with additional strain caused by swelling/shrinkage behaviour and by temperature change. In this study, special attention has been paid to the analysis of the thermally induced changes in material properties. The strong mechanical and hydraulic anisotropic properties of clay rock are described by a transversely isotropic mechanical model and by a transversely isotropic permeability tensor, respectively. The thermal anisotropy is described by adoption of the bedding-orientation-dependent thermal conductivity. The dependency of the thermal

  12. Numerical analysis of thermo-hydro-mechanical (THM) processes in the clay based material

    International Nuclear Information System (INIS)

    Wang, Xuerui

    2016-01-01

    Clay formations are investigated worldwide as potential host rock for the deep geological disposal of high-level radioactive waste (HLW). Usually bentonite is preferred as the buffer and backfill material in the disposal system. In the disposal of HLW, heat emission is one of the most important issues as it can generate a series of complex thermo-hydro-mechanical (THM) processes in the surrounding materials and thus change the material properties. In the context of safety assessment, it is important to understand the thermally induced THM interactions and the associated change in material properties. In this work, the thermally induced coupled THM behaviours in the clay host rock and in the bentonite buffer as well as the corresponding coupling effects among the relevant material properties are numerically analysed. A coupled non-isothermal Richards flow mechanical model and a non-isothermal multiphase flow model were developed based on the scientific computer codes OpenGeoSys (OGS). Heat transfer in the porous media is governed by thermal conduction and advective flow of the pore fluids. Within the hydraulic processes, evaporation, vapour diffusion, and the unsaturated flow field are considered. Darcy's law is used to describe the advective flux of gas and liquid phases. The relative permeability of each phase is considered. The elastic deformation process is modelled by the generalized Hooke's law complemented with additional strain caused by swelling/shrinkage behaviour and by temperature change. In this study, special attention has been paid to the analysis of the thermally induced changes in material properties. The strong mechanical and hydraulic anisotropic properties of clay rock are described by a transversely isotropic mechanical model and by a transversely isotropic permeability tensor, respectively. The thermal anisotropy is described by adoption of the bedding-orientation-dependent thermal conductivity. The dependency of the thermal

  13. Removing barriers to rehabilitation: Theory-based family intervention in community settings after brain injury.

    Science.gov (United States)

    Stejskal, Taryn M

    2012-01-01

    Rehabilitation professionals have become increasingly aware that family members play a critical role in the recovery process of individuals after brain injury. In addition, researchers have begun to identify a relationship between family member caregivers' well-being and survivors' outcomes. The idea of a continuum of care or following survivors from inpatient care to community reintegration has become an important model of treatment across many hospital and community-based settings. In concert with the continuum of care, present research literature indicates that family intervention may be a key component to successful rehabilitation after brain injury. Yet, clinicians interacting with family members and survivors often feel confounded about how exactly to intervene with the broader family system beyond the individual survivor. Drawing on the systemic nature of the field of marriage and family therapy (MFT), this article provides information to assist clinicians in effectively intervening with families using theory-based interventions in community settings. First, a rationale for the utilization of systems-based, as opposed to individual-based, therapies will be uncovered. Second, historically relevant publications focusing on family psychotherapy and intervention after brain injury are reviewed and their implications discussed. Recommendations for the utilization of systemic theory-based principles and strategies, specifically cognitive behavioral therapy (CBT), narrative therapy (NT), and solution-focused therapy (SFT) will be examined. Descriptions of common challenges families and couples face will be presented along with case examples to illustrate how these theoretical frameworks might be applied to these special concerns postinjury. Finally, the article concludes with an overview of the ideas presented in this manuscript to assist practitioners and systems of care in community-based settings to more effectively intervene with the family system as a whole

  14. Numerical Simulation of an Oscillatory-Type Tidal Current Powered Generator Based on Robotic Fish Technology

    Directory of Open Access Journals (Sweden)

    Ikuo Yamamoto

    2017-10-01

    Full Text Available The generation of clean renewable energy is becoming increasingly critical, as pollution and global warming threaten the environment in which we live. While there are many different kinds of natural energy that can be harnessed, marine tidal energy offers reliability and predictability. However, harnessing energy from tidal flows is inherently difficult, due to the harsh environment. Current mechanisms used to harness tidal flows center around propeller-based solutions but are particularly prone to failure due to marine fouling from such as encrustations and seaweed entanglement and the corrosion that naturally occurs in sea water. In order to efficiently harness tidal flow energy in a cost-efficient manner, development of a mechanism that is inherently resistant to these harsh conditions is required. One such mechanism is a simple oscillatory-type mechanism based on robotic fish tail fin technology. This uses the physical phenomenon of vortex-induced oscillation, in which water currents flowing around an object induce transverse motion. We consider two specific types of oscillators, firstly a wing-type oscillator, in which the optimal elastic modulus is being sort. Secondly, the optimal selection of shape from 6 basic shapes for a reciprocating oscillating head-type oscillator. A numerical analysis tool for fluid structure-coupled problems—ANSYS—was used to select the optimum softness of material for the first type of oscillator and the best shape for the second type of oscillator, based on the exhibition of high lift coefficients. For a wing-type oscillator, an optimum elastic modulus for an air-foil was found. For a self-induced vibration-type mechanism, based on analysis of vorticity and velocity distribution, a square-shaped head exhibited a lift coefficient of more than two times that of a cylindrically shaped head. Analysis of the flow field clearly showed that the discontinuous flow caused by a square-headed oscillator results in

  15. Testing for direct genetic effects using a screening step in family-based association studies

    Directory of Open Access Journals (Sweden)

    Sharon M Lutz

    2013-11-01

    Full Text Available In genome wide association studies (GWAS, families based studies tend to have less power to detect genetic associations than population based studies, such as case-control studies. This can be an issue when testing if genes in a family based GWAS have a direct effect on the phenotype of interest or if the genes act indirectly through a secondary phenotype. When multiple SNPs are tested for a direct effect in the family based study, a screening step can be used to minimize the burden of multiple comparisons in the causal analysis. We propose a 2-stage screening step that can be incorporated into the family based association test (FBAT approach similar to the conditional mean model approach in the VanSteen-algorithm [1]. Simulations demonstrate that the type 1 error is preserved and this method is advantageous when multiple markers are tested. This method is illustrated by an application to the Framingham Heart Study.

  16. Engaging Mexican Origin Families in a School-Based Preventive Intervention

    Science.gov (United States)

    Mauricio, Anne M.; Gonzales, Nancy A.; Millsap, Roger E.; Meza, Connie M.; Dumka, Larry E.; Germán, Miguelina; Genalo, M. Toni

    2009-01-01

    This study describes a culturally sensitive approach to engage Mexican origin families in a school-based, family-focused preventive intervention trial. The approach was evaluated via assessing study enrollment and intervention program participation, as well as examining predictors of engagement at each stage. Incorporating traditional cultural values into all aspects of engagement resulted in participation rates higher than reported rates of minority-focused trials not emphasizing cultural sensitivity. Family preferred language (English or Spanish) or acculturation status predicted engagement at all levels, with less acculturated families participating at higher rates. Spanish-language families with less acculturated adolescents participated at higher rates than Spanish-language families with more acculturated adolescents. Other findings included two-way interactions between family language and the target child’s familism values, family single- vs. dual-parent status, and number of hours the primary parent worked in predicting intervention participation. Editors’ Strategic Implications: The authors present a promising approach—which requires replication—to engaging and retaining Mexican American families in a school-based prevention program. The research also highlights the importance of considering acculturation status when implementing and studying culturally tailored aspects of prevention models. PMID:18004659

  17. Evaluation of the base/subgrade soil under repeated loading : phase I--laboratory testing and numerical modeling of geogrid reinforced bases in flexible pavement.

    Science.gov (United States)

    2009-10-01

    This report documents the results of a study that was conducted to characterize the behavior of geogrid reinforced base : course materials. The research was conducted through an experimental testing and numerical modeling programs. The : experimental...

  18. Validation of numerical model for cook stove using Reynolds averaged Navier-Stokes based solver

    Science.gov (United States)

    Islam, Md. Moinul; Hasan, Md. Abdullah Al; Rahman, Md. Mominur; Rahaman, Md. Mashiur

    2017-12-01

    Biomass fired cook stoves, for many years, have been the main cooking appliance for the rural people of developing countries. Several researches have been carried out to the find efficient stoves. In the present study, numerical model of an improved household cook stove is developed to analyze the heat transfer and flow behavior of gas during operation. The numerical model is validated with the experimental results. Computation of the numerical model is executed the using non-premixed combustion model. Reynold's averaged Navier-Stokes (RaNS) equation along with the κ - ɛ model governed the turbulent flow associated within the computed domain. The computational results are in well agreement with the experiment. Developed numerical model can be used to predict the effect of different biomasses on the efficiency of the cook stove.

  19. An Adjoint-based Numerical Method for a class of nonlinear Fokker-Planck Equations

    KAUST Repository

    Festa, Adriano; Gomes, Diogo A.; Machado Velho, Roberto

    2017-01-01

    Here, we introduce a numerical approach for a class of Fokker-Planck (FP) equations. These equations are the adjoint of the linearization of Hamilton-Jacobi (HJ) equations. Using this structure, we show how to transfer the properties of schemes for HJ equations to the FP equations. Hence, we get numerical schemes with desirable features such as positivity and mass-preservation. We illustrate this approach in examples that include mean-field games and a crowd motion model.

  20. Numerical stability for velocity-based 2-phase formulation for geotechnical dynamic analysis

    OpenAIRE

    Mieremet, M.M.J.

    2015-01-01

    As a master student in AppliedMathematics at the Delft University of Technology I am highly educated in Numerical Analysis. My interest in this field even mademe choose elective courses such as Advanced Numerical Methods, Applied Finite Elements and Computational Fluid Dynamics. In my search for a challenging graduationproject I chose a research proposal on the material point method, an extension of the finite element method that is well-suited for problems involving large deformations. The p...

  1. An Adjoint-based Numerical Method for a class of nonlinear Fokker-Planck Equations

    KAUST Repository

    Festa, Adriano

    2017-03-22

    Here, we introduce a numerical approach for a class of Fokker-Planck (FP) equations. These equations are the adjoint of the linearization of Hamilton-Jacobi (HJ) equations. Using this structure, we show how to transfer the properties of schemes for HJ equations to the FP equations. Hence, we get numerical schemes with desirable features such as positivity and mass-preservation. We illustrate this approach in examples that include mean-field games and a crowd motion model.

  2. Reaching common ground: a patient-family-based conceptual framework of quality EOL care.

    Science.gov (United States)

    Howell, Doris; Brazil, Kevin

    2005-01-01

    Improvement in the quality of end-of-life (EOL) care is a priority health care issue since serious deficiencies in quality of care have been reported across care settings. Increasing pressure is now focused on Canadian health care organizations to be accountable for the quality of palliative and EOL care delivered. Numerous domains of quality EOL care upon which to create accountability frameworks are now published, with some derived from the patient/family perspective. There is a need to reach common ground on the domains of quality EOL care valued by patients and families in order to develop consistent performance measures and set priorities for health care improvement. This paper describes a meta-synthesis study to develop a common conceptual framework of quality EOL care integrating attributes of quality valued by patients and their families.

  3. A protein relational database and protein family knowledge bases to facilitate structure-based design analyses.

    Science.gov (United States)

    Mobilio, Dominick; Walker, Gary; Brooijmans, Natasja; Nilakantan, Ramaswamy; Denny, R Aldrin; Dejoannis, Jason; Feyfant, Eric; Kowticwar, Rupesh K; Mankala, Jyoti; Palli, Satish; Punyamantula, Sairam; Tatipally, Maneesh; John, Reji K; Humblet, Christine

    2010-08-01

    The Protein Data Bank is the most comprehensive source of experimental macromolecular structures. It can, however, be difficult at times to locate relevant structures with the Protein Data Bank search interface. This is particularly true when searching for complexes containing specific interactions between protein and ligand atoms. Moreover, searching within a family of proteins can be tedious. For example, one cannot search for some conserved residue as residue numbers vary across structures. We describe herein three databases, Protein Relational Database, Kinase Knowledge Base, and Matrix Metalloproteinase Knowledge Base, containing protein structures from the Protein Data Bank. In Protein Relational Database, atom-atom distances between protein and ligand have been precalculated allowing for millisecond retrieval based on atom identity and distance constraints. Ring centroids, centroid-centroid and centroid-atom distances and angles have also been included permitting queries for pi-stacking interactions and other structural motifs involving rings. Other geometric features can be searched through the inclusion of residue pair and triplet distances. In Kinase Knowledge Base and Matrix Metalloproteinase Knowledge Base, the catalytic domains have been aligned into common residue numbering schemes. Thus, by searching across Protein Relational Database and Kinase Knowledge Base, one can easily retrieve structures wherein, for example, a ligand of interest is making contact with the gatekeeper residue.

  4. Exploring the potential of a family-based prevention intervention to reduce alcohol use and violence within HIV-affected families in Rwanda.

    Science.gov (United States)

    Chaudhury, Sumona; Brown, Felicity L; Kirk, Catherine M; Mukunzi, Sylvere; Nyirandagijimana, Beatha; Mukandanga, Josee; Ukundineza, Christian; Godfrey, Kalisa; Ng, Lauren C; Brennan, Robert T; Betancourt, Theresa S

    2016-03-01

    HIV-affected families report higher rates of harmful alcohol use, intimate partner violence (IPV) and family conflict, which can have detrimental effects on children. Few evidence-based interventions exist to address these complex issues in Sub-Saharan Africa. This mixed methods study explores the potential of a family-based intervention to reduce IPV, family conflict and problems related to alcohol use to promote child mental health and family functioning within HIV-affected families in post-genocide Rwanda. A family home-visiting, evidence-based intervention designed to identify and enhance resilience and communication in families to promote mental health in children was adapted and developed for use in this context for families affected by caregiver HIV in Rwanda. The intervention was adapted and developed through a series of pilot study phases prior to being tested in open and randomized controlled trials (RCTs) in Rwanda for families affected by caregiver HIV. Quantitative and qualitative data from the RCT are explored here using a mixed methods approach to integrate findings. Reductions in alcohol use and IPV among caregivers are supported by qualitative reports of improved family functioning, lower levels of violence and problem drinking as well as improved child mental health, among the intervention group. This mixed methods analysis supports the potential of family-based interventions to reduce adverse caregiver behaviors as a major mechanism for improving child well-being. Further studies to examine these mechanisms in well-powered trials are needed to extend the evidence-base on the promise of family-based intervention for use in low- and middle-income countries.

  5. Family vs Village-Based: Intangible View on the Sustainable of Seaweed Farming

    Science.gov (United States)

    Teniwut, Wellem A.; Teniwut, Yuliana K.; Teniwut, Roberto M. K.; Hasyim, Cawalinya L.

    2017-10-01

    Compare to other fishery activities for instance fish mariculture and catching fisheries, seaweed farming is considered easier. Also, the market for seaweed is wider and will keep growing. Thus, makes seaweed farming as one of the fastest commodity to improve the welfare of a coastal community. There are technical and non-technical factors in seaweed farming management, for non-technical on this intangible factors vary between family-based and village-based management, therefore aimed of this study was to simulate farmers decision to choose between family-based and village-based on seaweed managing system trigger by intangible factors. We conducted our study in Southeast Maluku, data collecting conducted from October to December 2016 by depth interview and questionnaires on seaweed farmers. We used logistic regression to compare each intangible factors on family and village-based seaweed farming management. The result showed that for family-based management farmers were willing to transfer their knowledge among each member in the household. For village-based revealed that farmers with higher education background tend to work on village-based, also, the result also stated that in village-based management member were those who have better capability and skill, at the same time village-based management had a small probability for conflict to occur compared to family-based.

  6. Numerical simulation on ferrofluid flow in fractured porous media based on discrete-fracture model

    Science.gov (United States)

    Huang, Tao; Yao, Jun; Huang, Zhaoqin; Yin, Xiaolong; Xie, Haojun; Zhang, Jianguang

    2017-06-01

    Water flooding is an efficient approach to maintain reservoir pressure and has been widely used to enhance oil recovery. However, preferential water pathways such as fractures can significantly decrease the sweep efficiency. Therefore, the utilization ratio of injected water is seriously affected. How to develop new flooding technology to further improve the oil recovery in this situation is a pressing problem. For the past few years, controllable ferrofluid has caused the extensive concern in oil industry as a new functional material. In the presence of a gradient in the magnetic field strength, a magnetic body force is produced on the ferrofluid so that the attractive magnetic forces allow the ferrofluid to be manipulated to flow in any desired direction through the control of the external magnetic field. In view of these properties, the potential application of using the ferrofluid as a new kind of displacing fluid for flooding in fractured porous media is been studied in this paper for the first time. Considering the physical process of the mobilization of ferrofluid through porous media by arrangement of strong external magnetic fields, the magnetic body force was introduced into the Darcy equation and deals with fractures based on the discrete-fracture model. The fully implicit finite volume method is used to solve mathematical model and the validity and accuracy of numerical simulation, which is demonstrated through an experiment with ferrofluid flowing in a single fractured oil-saturated sand in a 2-D horizontal cell. At last, the water flooding and ferrofluid flooding in a complex fractured porous media have been studied. The results showed that the ferrofluid can be manipulated to flow in desired direction through control of the external magnetic field, so that using ferrofluid for flooding can raise the scope of the whole displacement. As a consequence, the oil recovery has been greatly improved in comparison to water flooding. Thus, the ferrofluid

  7. Numerical simulation of the gasification based biomass cofiring on a 600 MW pulverized coal boiler

    Energy Technology Data Exchange (ETDEWEB)

    Yang, R.; Dong, C.Q.; Yang, Y.P.; Zhang, J.J. [Key Laboratory of Condition Monitoring and Control for Power Plant Equipment, Ministry of Education, Beijing (China); North China Electric Power Univ., Beijing (China). Key Laboratory of Security and Clean Energy Technology

    2008-07-01

    Biomass cofiring is the practice of supplementing a base fuel with biomass fuels such as wood waste, short rotation woody crops, short rotation herbaceous crops, alfalfa stems, various types of manure, landfill gas and wastewater treatment gas. The practice began in the 1980s and is becoming commonplace in Europe and the United States. The benefits include reduced carbon dioxide emissions and other airborne emissions such as nitrous oxides (NOx), sulphur dioxide and trace metals; potential for reduced fuel cost; and supporting economic development among wood products and agricultural industries in a given service area. However, technical challenges remain when biomass is directly cofired with coal. These include limited percentage of biomass for cofiring; fuel preparation, storage, and delivery; ash deposition and corrosion associated with the high alkali metal and chlorine content in biomass; fly ash utilization; and impacts on the selective catalytic reduction (SCR) system. This study involved a numerical simulation of cofiring coal and biomass gas in a 600 MWe tangential PC boiler using Fluent software. Combustion behaviour and pollutant formation in the conventional combustion and cofiring cases were compared. The study revealed that reduced NOx emissions can be achieved when producer gas is injected from the lowest layer burner. The nitrogen monoxide (NO) removal rate was between 56.64 and 70.37 per cent. In addition, slagging can be reduced because of the lower temperature. It was concluded that the convection heat transfer area should be increased or the proportion of biomass gas should be decreased to achieve higher boiler efficiency. 8 refs., 4 tabs., 8 figs.

  8. Family-based intervention for controlling childhood obesity: An experience among Iranian children

    Directory of Open Access Journals (Sweden)

    Fatemeh Esfarjani

    2013-01-01

    Conclusions: The family-based lifestyle program had limited but desirable effects on anthropometric and metabolic outcomes of the obese children. We suggest that a longer period of intervention may have more favorable results.

  9. Experimental and numerical studies on laser-based powder deposition of slurry erosion resistant materials

    Science.gov (United States)

    Balu, Prabu

    cracking issue, and 3) the effect of composition and composition gradient of Ni and WC on the slurry erosion resistance over a wide range of erosion conditions. This thesis presents a set of numerical and experimental methods in order to address the challenges mentioned above. A three-dimensional (3-D) computational fluid dynamics (CFD) based powder flow model and three vision based techniques were developed in order to visualize the process of feeding the Ni-WC powder in the LBPD process. The results provide the guidelines for efficiently feeding the Ni-WC composite powder into the laser-formed molten pool. The finite element (FE) based experimentally verified 3-D thermal and thermo-mechanical models are developed in order to understand the thermal and stress evolutions in Ni-WC composite material during the LBPD process. The models address the effect of the process variables, preheating temperature, and different mass fractions of WC in Ni on thermal cycles and stress distributions within the deposited material. The slurry erosion behavior of the single and multilayered deposits of Ni-WC composite material produced by the LBPD process is investigated using an accelerated slurry erosion testing machine and a 3-D FE dynamic model. The verified model is used to identify the appropriate composition and composition gradient of Ni-WC composite material required to achieve erosion resistance over a wide range of erosion conditions.

  10. Using incomplete trios to boost confidence in family based association studies

    Directory of Open Access Journals (Sweden)

    Varsha eDhankani

    2016-03-01

    Full Text Available Most currently available family based association tests are designed to account only for nuclear families with complete genotypes for parents as well as offspring. Due to the availability of increasingly less expensive generation of whole genome sequencing information, genetic studies are able to collect data for more families and from large family cohorts with the goal of improving statistical power. However, due to missing genotypes, many families are not included in the family based association tests, negating the benefits of large scale sequencing data. Here, we present the CIFBAT method to use incomplete families in Family Based Association Test (FBAT to evaluate robustness against missing data. CIFBAT uses quantile intervals of the FBAT statistic by randomly choosing valid completions of incomplete family genotypes based on Mendelian inheritance rules. By considering all valid completions equally likely and computing quantile intervals over several randomized iterations, CIFBAT avoids assumption of a homogeneous population structure or any particular missingness pattern in the data. Using simulated data, we show that the quantile intervals computed by CIFBAT are useful in validating robustness of the FBAT statistic against missing data and in identifying genomic markers with higher precision. We also propose a novel set of candidate genomic markers for uterine related abnormalities from analysis of familial whole genome sequences, and provide validation for a previously established set of candidate markers for Type 1 diabetes. We have provided a software package that incorporates TDT, robustTDT, FBAT and CIFBAT. The data format proposed for the software uses half the memory space that the standard FBAT format (PED files use, making it efficient for large scale genome wide association studies.

  11. Multiplicative noise removal through fractional order tv-based model and fast numerical schemes for its approximation

    Science.gov (United States)

    Ullah, Asmat; Chen, Wen; Khan, Mushtaq Ahmad

    2017-07-01

    This paper introduces a fractional order total variation (FOTV) based model with three different weights in the fractional order derivative definition for multiplicative noise removal purpose. The fractional-order Euler Lagrange equation which is a highly non-linear partial differential equation (PDE) is obtained by the minimization of the energy functional for image restoration. Two numerical schemes namely an iterative scheme based on the dual theory and majorization- minimization algorithm (MMA) are used. To improve the restoration results, we opt for an adaptive parameter selection procedure for the proposed model by applying the trial and error method. We report numerical simulations which show the validity and state of the art performance of the fractional-order model in visual improvement as well as an increase in the peak signal to noise ratio comparing to corresponding methods. Numerical experiments also demonstrate that MMAbased methodology is slightly better than that of an iterative scheme.

  12. Review of performance-based incentives in community-based family planning programmes

    Science.gov (United States)

    Bellows, Nicole M; Askew, Ian; Bellows, Benjamin

    2015-01-01

    Background One strategy for improving family planning (FP) uptake at the community level is the use of performance-based incentives (PBIs), which offer community distributors financial incentives to recruit more users of FP. This article examines the use of PBIs in community-based FP programmes via a literature search of the peer-reviewed and grey literature conducted in April 2013. Results A total of 28 community-based FP programmes in 21 countries were identified as having used PBIs. The most common approach was a sales commission model where distributors received commission for FP products sold, while a referral payment model for long-term methods was also used extensively. Six evaluations were identified that specifically examined the impact of the PBI in community-based FP programmes. Overall, the results of the evaluations are mixed and more research is needed; however, the findings suggest that easy-to-understand PBIs can be successful in increasing the use of FP at the community level. Conclusion For future use of PBIs in community-based FP programmes it is important to consider the ethics of incentivising FP and ensuring that PBIs are non-coercive and choice-enhancing. PMID:25037703

  13. Small Private Online Research: A Proposal for A Numerical Methods Course Based on Technology Use and Blended Learning

    Science.gov (United States)

    Cepeda, Francisco Javier Delgado

    2017-01-01

    This work presents a proposed model in blended learning for a numerical methods course evolved from traditional teaching into a research lab in scientific visualization. The blended learning approach sets a differentiated and flexible scheme based on a mobile setup and face to face sessions centered on a net of research challenges. Model is…

  14. A Spreadsheet-Based Visualized Mindtool for Improving Students' Learning Performance in Identifying Relationships between Numerical Variables

    Science.gov (United States)

    Lai, Chiu-Lin; Hwang, Gwo-Jen

    2015-01-01

    In this study, a spreadsheet-based visualized Mindtool was developed for improving students' learning performance when finding relationships between numerical variables by engaging them in reasoning and decision-making activities. To evaluate the effectiveness of the proposed approach, an experiment was conducted on the "phenomena of climate…

  15. Numerical Methods for the Optimization of Nonlinear Residual-Based Sungrid-Scale Models Using the Variational Germano Identity

    NARCIS (Netherlands)

    Maher, G.D.; Hulshoff, S.J.

    2014-01-01

    The Variational Germano Identity [1, 2] is used to optimize the coefficients of residual-based subgrid-scale models that arise from the application of a Variational Multiscale Method [3, 4]. It is demonstrated that numerical iterative methods can be used to solve the Germano relations to obtain

  16. A numerical study into the effects of elongated capsules on the healing efficiency of liquid-based systems

    NARCIS (Netherlands)

    Mookhoek, S.D.; Fischer, H.R.; Zwaag, S. van der

    2009-01-01

    In this numerical study the release of healing agent for liquid-based self-healing systems for elongated microcapsules is studied and compared with that for the usual spherical capsules. It is shown that a high aspect ratio and a proper spatial orientation of the elongated capsules have a positive

  17. Teaching and Learning Numerical Analysis and Optimization: A Didactic Framework and Applications of Inquiry-Based Learning

    Science.gov (United States)

    Lappas, Pantelis Z.; Kritikos, Manolis N.

    2018-01-01

    The main objective of this paper is to propose a didactic framework for teaching Applied Mathematics in higher education. After describing the structure of the framework, several applications of inquiry-based learning in teaching numerical analysis and optimization are provided to illustrate the potential of the proposed framework. The framework…

  18. A numerical model for the thermal history of rocks based on confined horizontal fission tracks

    DEFF Research Database (Denmark)

    Jensen, Peter Klint; Hansen, Kirsten; Kunzendorf, Helmar

    1992-01-01

    A numerical model for determination of the thermal history of rocks is presented. It is shown that the thermal history may be uniquely determined as a piece-by-piece linear function on the basis of etched confined, horizontal fission track length distributions, their surface densities, and the ur......A numerical model for determination of the thermal history of rocks is presented. It is shown that the thermal history may be uniquely determined as a piece-by-piece linear function on the basis of etched confined, horizontal fission track length distributions, their surface densities...

  19. Numerical simulation of terahertz-wave propagation in photonic crystal waveguide based on sapphire shaped crystal

    International Nuclear Information System (INIS)

    Zaytsev, Kirill I; Katyba, Gleb M; Mukhina, Elena E; Kudrin, Konstantin G; Karasik, Valeriy E; Yurchenko, Stanislav O; Kurlov, Vladimir N; Shikunova, Irina A; Reshetov, Igor V

    2016-01-01

    Terahertz (THz) waveguiding in sapphire shaped single crystal has been studied using the numerical simulations. The numerical finite-difference analysis has been implemented to characterize the dispersion and loss in the photonic crystalline waveguide containing hollow cylindrical channels, which form the hexagonal lattice. Observed results demonstrate the ability to guide the THz-waves in multi-mode regime in wide frequency range with the minimal power extinction coefficient of 0.02 dB/cm at 1.45 THz. This shows the prospectives of the shaped crystals for highly-efficient THz waveguiding. (paper)

  20. Family meals and eating practices among mothers in Santos, Brazil: A population-based study.

    Science.gov (United States)

    Sato, Priscila de Morais; Lourenço, Bárbara Hatzlhoffer; Trude, Angela Cristina Bizzotto; Unsain, Ramiro Fernandez; Pereira, Patrícia Rocha; Martins, Paula Andrea; Scagliusi, Fernanda Baeza

    2016-08-01

    This study investigates family meals among mothers and explores associations between eating with family and sociodemographic characteristics, body mass index, and eating practices. A population-based cross-sectional study, using complex cluster-sampling, was conducted in the city of Santos, Brazil with 439 mothers. Frequency of family meals was assessed by asking if mothers did or did not usually have a) breakfast, b) lunch, and c) dinner with family. Linear regression analyses were conducted for the number of meals eaten with family per day and each of the potential explanatory variables, adjusting for the mother's age. Poisson regression with robust variance was used to analyze each factor associated with eating with family as classified categorically: a) sharing meals with family, b) not eating any meals with family. Only 16.4% (n = 72) of participants did not eat any meals with family. From the 83.6% (n = 367) of mothers that had at least one family meal per day, 69.70% (n = 306) ate dinner with their families. Mothers aged ≥40 years reported significantly fewer meals eaten with family compared to mothers aged 30-39 years (β: -0.26, p = 0.04). Having family meals was 54% more prevalent among mothers with ≥12 years of education (PR for no meals eaten with family: 0.54, 95% CI: 0.30; 0.96, p = 0.03), when compared to mothers with less than nine years of education. Eating no meals with family was 85% more prevalent among mothers who reported that eating was one of the biggest pleasures in their lives (PR: 1.85, 95% CI: 1.21; 2.82, p = 0.004). We suggest the need for further research investigating the effects of family meals on mothers' health through nutritional and phenomenological approaches. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Recruiting and retaining family caregivers to a randomized controlled trial on mindfulness-based stress reduction.

    Science.gov (United States)

    Whitebird, Robin R; Kreitzer, Mary Jo; Lewis, Beth A; Hanson, Leah R; Crain, A Lauren; Enstad, Chris J; Mehta, Adele

    2011-09-01

    Caregivers for a family member with dementia experience chronic long-term stress that may benefit from new complementary therapies such as mindfulness-based stress reduction. Little is known however, about the challenges of recruiting and retaining family caregivers to research on mind-body based complementary therapies. Our pilot study is the first of its kind to successfully recruit caregivers for a family member with dementia to a randomized controlled pilot study of mindfulness-based stress reduction. The study used an array of recruitment strategies and techniques that were tailored to fit the unique features of our recruitment sources and employed retention strategies that placed high value on establishing early and ongoing communication with potential participants. Innovative recruitment methods including conducting outreach to health plan members and generating press coverage were combined with standard methods of community outreach and paid advertising. We were successful in exceeding our recruitment goal and retained 92% of the study participants at post-intervention (2 months) and 90% at 6 months. Recruitment and retention for family caregiver interventions employing mind-body based complementary therapies can be successful despite many challenges. Barriers include cultural perceptions about the use and benefit of complementary therapies, cultural differences with how the role of family caregiver is perceived, the use of group-based designs requiring significant time commitment by participants, and travel and respite care needs for busy family caregivers. Copyright © 2011 Elsevier Inc. All rights reserved.

  2. Family Law Reform to Challenge Gender-Based Violence: A ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    -based Women's Learning Partnership (WLP), building on its 15-year history of ... Women's Learning Partnership for Rights, Development, and Peace, Ltd. Pays d' institution. United States. Site internet. http://www.learningpartnership.org ...

  3. [The relationship-based meaning of teenage pregnancy in Bogotá regarding the family system].

    Science.gov (United States)

    Barreto-Hauzeur, Eliane; Sáenz-Lozada, María L; Velandia-Sepulveda, Fabiola; Gómez-González, Jeny

    2013-01-01

    Ascertaining the meaning of teenage pregnancy for teenagers and their immediate families. This was an analytical, cross-sectional, exploratory, qualitative study. Data was obtained through in-depth interviews with 10 pregnant teenagers and their immediate families, plus a focus group involving another 12 pregnant teenagers. Analysis by category revealed a tenuous limit between adolescents' narrative identity and a lack of such identity and identity based on the concept of family. Pregnancy provokes a series of responses within families, including fear in a pregnant adolescent and her partner, disappointment on the part of the parents, social isolation and eventual acceptance and redefinition of such pregnancy. Pregnancy can provide the means for an adolescent to redress a deficit in her emotional needs, such condition keeping the family together at the expense of a teenager's emancipation and may represent an intergenerational legacy.

  4. Vesicle Motion during Sustained Exocytosis in Chromaffin Cells: Numerical Model Based on Amperometric Measurements.

    Directory of Open Access Journals (Sweden)

    Daungruthai Jarukanont

    Full Text Available Chromaffin cells release catecholamines by exocytosis, a process that includes vesicle docking, priming and fusion. Although all these steps have been intensively studied, some aspects of their mechanisms, particularly those regarding vesicle transport to the active sites situated at the membrane, are still unclear. In this work, we show that it is possible to extract information on vesicle motion in Chromaffin cells from the combination of Langevin simulations and amperometric measurements. We developed a numerical model based on Langevin simulations of vesicle motion towards the cell membrane and on the statistical analysis of vesicle arrival times. We also performed amperometric experiments in bovine-adrenal Chromaffin cells under Ba2+ stimulation to capture neurotransmitter releases during sustained exocytosis. In the sustained phase, each amperometric peak can be related to a single release from a new vesicle arriving at the active site. The amperometric signal can then be mapped into a spike-series of release events. We normalized the spike-series resulting from the current peaks using a time-rescaling transformation, thus making signals coming from different cells comparable. We discuss why the obtained spike-series may contain information about the motion of all vesicles leading to release of catecholamines. We show that the release statistics in our experiments considerably deviate from Poisson processes. Moreover, the interspike-time probability is reasonably well described by two-parameter gamma distributions. In order to interpret this result we computed the vesicles' arrival statistics from our Langevin simulations. As expected, assuming purely diffusive vesicle motion we obtain Poisson statistics. However, if we assume that all vesicles are guided toward the membrane by an attractive harmonic potential, simulations also lead to gamma distributions of the interspike-time probability, in remarkably good agreement with experiment. We

  5. Vesicle Motion during Sustained Exocytosis in Chromaffin Cells: Numerical Model Based on Amperometric Measurements.

    Science.gov (United States)

    Jarukanont, Daungruthai; Bonifas Arredondo, Imelda; Femat, Ricardo; Garcia, Martin E

    2015-01-01

    Chromaffin cells release catecholamines by exocytosis, a process that includes vesicle docking, priming and fusion. Although all these steps have been intensively studied, some aspects of their mechanisms, particularly those regarding vesicle transport to the active sites situated at the membrane, are still unclear. In this work, we show that it is possible to extract information on vesicle motion in Chromaffin cells from the combination of Langevin simulations and amperometric measurements. We developed a numerical model based on Langevin simulations of vesicle motion towards the cell membrane and on the statistical analysis of vesicle arrival times. We also performed amperometric experiments in bovine-adrenal Chromaffin cells under Ba2+ stimulation to capture neurotransmitter releases during sustained exocytosis. In the sustained phase, each amperometric peak can be related to a single release from a new vesicle arriving at the active site. The amperometric signal can then be mapped into a spike-series of release events. We normalized the spike-series resulting from the current peaks using a time-rescaling transformation, thus making signals coming from different cells comparable. We discuss why the obtained spike-series may contain information about the motion of all vesicles leading to release of catecholamines. We show that the release statistics in our experiments considerably deviate from Poisson processes. Moreover, the interspike-time probability is reasonably well described by two-parameter gamma distributions. In order to interpret this result we computed the vesicles' arrival statistics from our Langevin simulations. As expected, assuming purely diffusive vesicle motion we obtain Poisson statistics. However, if we assume that all vesicles are guided toward the membrane by an attractive harmonic potential, simulations also lead to gamma distributions of the interspike-time probability, in remarkably good agreement with experiment. We also show that

  6. Cloud-Based Numerical Weather Prediction for Near Real-Time Forecasting and Disaster Response

    Science.gov (United States)

    Molthan, Andrew; Case, Jonathan; Venners, Jason; Schroeder, Richard; Checchi, Milton; Zavodsky, Bradley; Limaye, Ashutosh; O'Brien, Raymond

    2015-01-01

    The use of cloud computing resources continues to grow within the public and private sector components of the weather enterprise as users become more familiar with cloud-computing concepts, and competition among service providers continues to reduce costs and other barriers to entry. Cloud resources can also provide capabilities similar to high-performance computing environments, supporting multi-node systems required for near real-time, regional weather predictions. Referred to as "Infrastructure as a Service", or IaaS, the use of cloud-based computing hardware in an on-demand payment system allows for rapid deployment of a modeling system in environments lacking access to a large, supercomputing infrastructure. Use of IaaS capabilities to support regional weather prediction may be of particular interest to developing countries that have not yet established large supercomputing resources, but would otherwise benefit from a regional weather forecasting capability. Recently, collaborators from NASA Marshall Space Flight Center and Ames Research Center have developed a scripted, on-demand capability for launching the NOAA/NWS Science and Training Resource Center (STRC) Environmental Modeling System (EMS), which includes pre-compiled binaries of the latest version of the Weather Research and Forecasting (WRF) model. The WRF-EMS provides scripting for downloading appropriate initial and boundary conditions from global models, along with higher-resolution vegetation, land surface, and sea surface temperature data sets provided by the NASA Short-term Prediction Research and Transition (SPoRT) Center. This presentation will provide an overview of the modeling system capabilities and benchmarks performed on the Amazon Elastic Compute Cloud (EC2) environment. In addition, the presentation will discuss future opportunities to deploy the system in support of weather prediction in developing countries supported by NASA's SERVIR Project, which provides capacity building

  7. Numerical Analyses of Subsoil-structure Interaction in Original Non-commercial Software based on FEM

    Science.gov (United States)

    Cajka, R.; Vaskova, J.; Vasek, J.

    2018-04-01

    For decades attention has been paid to interaction of foundation structures and subsoil and development of interaction models. Given that analytical solutions of subsoil-structure interaction could be deduced only for some simple shapes of load, analytical solutions are increasingly being replaced by numerical solutions (eg. FEM – Finite element method). Numerical analyses provides greater possibilities for taking into account the real factors involved in the subsoil-structure interaction and was also used in this article. This makes it possible to design the foundation structures more efficiently and still reliably and securely. Currently there are several software that, can deal with the interaction of foundations and subsoil. It has been demonstrated that non-commercial software called MKPINTER (created by Cajka) provides appropriately results close to actual measured values. In MKPINTER software stress-strain analysis of elastic half-space by means of Gauss numerical integration and Jacobean of transformation is done. Input data for numerical analysis were observed by experimental loading test of concrete slab. The loading was performed using unique experimental equipment which was constructed in the area Faculty of Civil Engineering, VŠB-TU Ostrava. The purpose of this paper is to compare resulting deformation of the slab with values observed during experimental loading test.

  8. Lateral control required for satisfactory flying qualities based on flight tests of numerous airplanes

    Science.gov (United States)

    Gilruth, R R; Turner, W N

    1941-01-01

    Report presents the results of an analysis made of the aileron control characteristics of numerous airplanes tested in flight by the National Advisory Committee for Aeronautics. By the use of previously developed theory, the observed values of pb/2v for the various wing-aileron arrangements were examined to determine the effective section characteristics of the various aileron types.

  9. The effect of numerical techniques on differential equation based chaotic generators

    KAUST Repository

    Zidan, Mohammed A.; Radwan, Ahmed G.; Salama, Khaled N.

    2012-01-01

    In this paper, we study the effect of the numerical solution accuracy on the digital implementation of differential chaos generators. Four systems are built on a Xilinx Virtex 4 FPGA using Euler, mid-point, and Runge-Kutta fourth order techniques

  10. Numerical Study of Wind Turbine Wake Modeling Based on a Actuator Surface Model

    DEFF Research Database (Denmark)

    Zhou, Huai-yang; Xu, Chang; Han, Xing Xing

    2017-01-01

    In the Actuator Surface Model (ALM), the turbine blades are represented by porous surfaces of velocity and pressure discontinuities to model the action of lifting surfaces on the flow. The numerical simulation is implemented on FLUENT platform combined with N-S equations. This model is improved o...

  11. Waveform model for an eccentric binary black hole based on the effective-one-body-numerical-relativity formalism

    Science.gov (United States)

    Cao, Zhoujian; Han, Wen-Biao

    2017-08-01

    Binary black hole systems are among the most important sources for gravitational wave detection. They are also good objects for theoretical research for general relativity. A gravitational waveform template is important to data analysis. An effective-one-body-numerical-relativity (EOBNR) model has played an essential role in the LIGO data analysis. For future space-based gravitational wave detection, many binary systems will admit a somewhat orbit eccentricity. At the same time, the eccentric binary is also an interesting topic for theoretical study in general relativity. In this paper, we construct the first eccentric binary waveform model based on an effective-one-body-numerical-relativity framework. Our basic assumption in the model construction is that the involved eccentricity is small. We have compared our eccentric EOBNR model to the circular one used in the LIGO data analysis. We have also tested our eccentric EOBNR model against another recently proposed eccentric binary waveform model; against numerical relativity simulation results; and against perturbation approximation results for extreme mass ratio binary systems. Compared to numerical relativity simulations with an eccentricity as large as about 0.2, the overlap factor for our eccentric EOBNR model is better than 0.98 for all tested cases, including spinless binary and spinning binary, equal mass binary, and unequal mass binary. Hopefully, our eccentric model can be the starting point to develop a faithful template for future space-based gravitational wave detectors.

  12. An open trial of Acceptance-based Separated Family Treatment (ASFT) for adolescents with anorexia nervosa.

    Science.gov (United States)

    Timko, C Alix; Zucker, Nancy L; Herbert, James D; Rodriguez, Daniel; Merwin, Rhonda M

    2015-06-01

    Family based-treatments have the most empirical support in the treatment of adolescent anorexia nervosa; yet, a significant percentage of adolescents and their families do not respond to manualized family based treatment (FBT). The aim of this open trial was to conduct a preliminary evaluation of an innovative family-based approach to the treatment of anorexia: Acceptance-based Separated Family Treatment (ASFT). Treatment was grounded in Acceptance and Commitment Therapy (ACT), delivered in a separated format, and included an ACT-informed skills program. Adolescents (ages 12-18) with anorexia or sub-threshold anorexia and their families received 20 treatment sessions over 24 weeks. Outcome indices included eating disorder symptomatology reported by the parent and adolescent, percentage of expected body weight achieved, and changes in psychological acceptance/avoidance. Half of the adolescents (48.0%) met criteria for full remission at the end of treatment, 29.8% met criteria for partial remission, and 21.3% did not improve. Overall, adolescents had a significant reduction in eating disorder symptoms and reached expected body weight. Treatment resulted in changes in psychological acceptance in the expected direction for both parents and adolescents. This open trial provides preliminary evidence for the feasibility, acceptability, and efficacy of ASFT for adolescents with anorexia. Directions for future research are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Family homework and school-based sex education: delaying early adolescents' sexual behavior.

    Science.gov (United States)

    Grossman, Jennifer M; Frye, Alice; Charmaraman, Linda; Erkut, Sumru

    2013-11-01

    Early sexual activity can undermine adolescents' future school success and health outcomes. The purpose of this study was to assess the role of a family homework component of a comprehensive sex education intervention in delaying sexual initiation for early adolescents and to explore what social and contextual factors prevent adolescents from completing these family homework activities. This mixed methods study included 6th- and 7th-grade survey responses from 706 students at 11 middle school schools receiving a sex education intervention, as well as interviews from a subset of 33, 7th-grade students from the larger sample. Adolescents who completed more family homework assignments were less likely to have vaginal intercourse in 7th grade than those who completed fewer assignments, after controlling for self-reports of having had vaginal intercourse in 6th grade and demographic variables. Participants' explanations for not completing assignments included personal, curriculum, and family-based reasons. Family homework activities designed to increase family communication about sexual issues can delay sex among early adolescents and contribute to school-based sex education programs. Successful sex education programs must identify and address barriers to family homework completion. © 2013, American School Health Association.

  14. Relative Risks for Lethal Prostate Cancer Based on Complete Family History of Prostate Cancer Death.

    Science.gov (United States)

    Albright, Frederick S; Stephenson, Robert A; Agarwal, Neeraj; Cannon-Albright, Lisa A

    2017-01-01

    There are few published familial relative risks (RR) for lethal prostate cancer. This study estimates RRs for lethal prostate cancer based on comprehensive family history data, with the goal of improving identification of those men at highest risk of dying from prostate cancer. We used a population-based genealogical resource linked to a statewide electronic SEER cancer registry and death certificates to estimate relative risks (RR) for death from prostate cancer based upon family history. Over 600,000 male probands were analyzed, representing a variety of family history constellations of lethal prostate cancer. RR estimates were based on the ratio of the observed to the expected number of lethal prostate cancer cases using internal rates. RRs for lethal prostate cancer based on the number of affected first-degree relatives (FDR) ranged from 2.49 (95% CI: 2.27, 2.73) for exactly 1 FDR to 5.30 (2.13, 10.93) for ≥3 affected FDRs. In an absence of affected FDRs, increased risk was also significant for increasing numbers of affected second-degree or third degree relatives. Equivalent risks were observed for similar maternal and paternal family history. This study provides population-based estimates of lethal prostate cancer risk based on lethal prostate cancer family history. Many family history constellations associated with two to greater than five times increased risk for lethal prostate cancer were identified. These lethal prostate cancer risk estimates hold potential for use in identification, screening, early diagnosis, and treatment of men at high risk for death from prostate cancer. Prostate77:41-48, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  15. A quasi-experimental evaluation of a school-based intervention for children experiencing family disruption.

    Science.gov (United States)

    Abel, Eileen Mazur; Chung-Canine, Unju; Broussard, Karen

    2013-01-01

    Despite the fact that children are negatively impacted by family separation and divorce (Amato, 2001 ; Dreman & Shemi, 2004 ; Kelly, 2000 ) there is a paucity of information regarding evidence-based social work practice with children coping with family disruption. In order to address this gap, the authors describe the process and outcomes of a quasi-experimental evaluation (N = 79) designed to reduce the behavioral, emotional, and academic problems that children often face when experiencing divorce or parental separation. Results of data analysis (paired t-tests, independent t-tests, and analysis of variance) suggest (p < .05) that the intervention is effective in helping children cope with family disruption.

  16. What is the evidence for using family based interventions to prevent stroke recurrence?

    Science.gov (United States)

    Lawrence, Maggie; McVey, Caroline; Kerr, Susan

    Stroke has a devastating impact on individuals and families. Risk factors for recurrence include lifestyle behaviours such as smoking, excessive alcohol consumption, an unhealthy diet and physical inactivity. This article describes a programme of research that aims to gather and synthesise the evidence required to inform the development and evaluation of a family centred, behavioural intervention designed to address lifestyle risk factors for recurrent stroke. We present an overview of the research undertaken to develop the evidence base. This included a survey of stroke nurse practice, a focus group study with people who had had a stroke as well as their family members, and a systematic review of the efficacy of lifestyle interventions.

  17. Attachment-based family therapy for depressed and suicidal adolescents: theory, clinical model and empirical support.

    Science.gov (United States)

    Ewing, E Stephanie Krauthamer; Diamond, Guy; Levy, Suzanne

    2015-01-01

    Attachment-Based Family Therapy (ABFT) is a manualized family-based intervention designed for working with depressed adolescents, including those at risk for suicide, and their families. It is an empirically informed and supported treatment. ABFT has its theoretical underpinnings in attachment theory and clinical roots in structural family therapy and emotion focused therapies. ABFT relies on a transactional model that aims to transform the quality of adolescent-parent attachment, as a means of providing the adolescent with a more secure relationship that can support them during challenging times generally, and the crises related to suicidal thinking and behavior, specifically. This article reviews: (1) the theoretical foundations of ABFT (attachment theory, models of emotional development); (2) the ABFT clinical model, including training and supervision factors; and (3) empirical support.

  18. The family house control system based on Raspberry Pi

    Directory of Open Access Journals (Sweden)

    Sysala Tomas

    2017-01-01

    Full Text Available The article deals with the design and implementation of a smart household based on simple wireless modules, which are monitoring (collecting data and controlling smart household supporting devices. The central unit processes measured parameters, and in relation to resulting values, a pre-set action is performed. Those actions variety can be configured by user via the user interface so that a set of smart rules for reaction on by household devices generated stimuli or problems can be created. That all together composes a control system based on Raspberry Pi, which manages indoor and outdoor temperature measurement, the lighting control, RF transmitter, jalousie, motion sensor control etc. There is a GUI for a PC and for a mobile phone as a part of that system.

  19. Numerical Simulation and Experimental Study of Deep Bed Corn Drying Based on Water Potential

    Directory of Open Access Journals (Sweden)

    Zhe Liu

    2015-01-01

    Full Text Available The concept and the model of water potential, which were widely used in agricultural field, have been proved to be beneficial in the application of vacuum drying model and have provided a new way to explore the grain drying model since being introduced to grain drying and storage fields. Aiming to overcome the shortcomings of traditional deep bed drying model, for instance, the application range of this method is narrow and such method does not apply to systems of which pressure would be an influential factor such as vacuum drying system in a way combining with water potential drying model. This study established a numerical simulation system of deep bed corn drying process which has been proved to be effective according to the results of numerical simulation and corresponding experimental investigation and has revealed that desorption and adsorption coexist in deep bed drying.

  20. A Novel Machine Learning Strategy Based on Two-Dimensional Numerical Models in Financial Engineering

    Directory of Open Access Journals (Sweden)

    Qingzhen Xu

    2013-01-01

    Full Text Available Machine learning is the most commonly used technique to address larger and more complex tasks by analyzing the most relevant information already present in databases. In order to better predict the future trend of the index, this paper proposes a two-dimensional numerical model for machine learning to simulate major U.S. stock market index and uses a nonlinear implicit finite-difference method to find numerical solutions of the two-dimensional simulation model. The proposed machine learning method uses partial differential equations to predict the stock market and can be extensively used to accelerate large-scale data processing on the history database. The experimental results show that the proposed algorithm reduces the prediction error and improves forecasting precision.

  1. Analysis of stresses on buried pipeline subjected to landslide based on numerical simulation and regression analysis

    Energy Technology Data Exchange (ETDEWEB)

    Han, Bing; Jing, Hongyuan; Liu, Jianping; Wu, Zhangzhong [PetroChina Pipeline RandD Center, Langfang, Hebei (China); Hao, Jianbin [School of Petroleum Engineering, Southwest Petroleum University, Chengdu, Sichuan (China)

    2010-07-01

    Landslides have a serious impact on the integrity of oil and gas pipelines in the tough terrain of Western China. This paper introduces a solving method of axial stress, which uses numerical simulation and regression analysis for the pipelines subjected to landslides. Numerical simulation is performed to analyze the change regularity of pipe stresses for the five vulnerability assessment indexes, which are: the distance between pipeline and landslide tail; the thickness of landslide; the inclination angle of landslide; the pipeline length passing through landslide; and the buried depth of pipeline. A pipeline passing through a certain landslide in southwest China was selected as an example to verify the feasibility and effectiveness of this method. This method has practical applicability, but it would need large numbers of examples to better verify its reliability and should be modified accordingly. Also, it only considers the case where the direction of the pipeline is perpendicular to the primary slip direction of the landslide.

  2. An integral equation-based numerical solver for Taylor states in toroidal geometries

    Science.gov (United States)

    O'Neil, Michael; Cerfon, Antoine J.

    2018-04-01

    We present an algorithm for the numerical calculation of Taylor states in toroidal and toroidal-shell geometries using an analytical framework developed for the solution to the time-harmonic Maxwell equations. Taylor states are a special case of what are known as Beltrami fields, or linear force-free fields. The scheme of this work relies on the generalized Debye source representation of Maxwell fields and an integral representation of Beltrami fields which immediately yields a well-conditioned second-kind integral equation. This integral equation has a unique solution whenever the Beltrami parameter λ is not a member of a discrete, countable set of resonances which physically correspond to spontaneous symmetry breaking. Several numerical examples relevant to magnetohydrodynamic equilibria calculations are provided. Lastly, our approach easily generalizes to arbitrary geometries, both bounded and unbounded, and of varying genus.

  3. Numerical Study of Tire Hydroplaning Based on Power Spectrum of Asphalt Pavement and Kinetic Friction Coefficient

    OpenAIRE

    Shengze Zhu; Xiuyu Liu; Qingqing Cao; Xiaoming Huang

    2017-01-01

    Hydroplaning is a driving phenomenon threating vehicle’s control stability and safety. It happens when tire rolls on wet pavement with high speed that hydrodynamic force uplifts the tire. Accurate numerical simulation to reveal the mechanism of hydroplaning and evaluate the function of relevant factors in this process is significant. In order to describe the friction behaviors of tire-pavement interaction, kinetic friction coefficient curve of tire rubber and asphalt pavement was obtained by ...

  4. Microstructure-based numerical modeling method for effective permittivity of ceramic/polymer composites

    Science.gov (United States)

    Jylhä, Liisi; Honkamo, Johanna; Jantunen, Heli; Sihvola, Ari

    2005-05-01

    Effective permittivity was modeled and measured for composites that consist of up to 35vol% of titanium dioxide powder dispersed in a continuous epoxy matrix. The study demonstrates a method that enables fast and accurate numerical modeling of the effective permittivity values of ceramic/polymer composites. The model requires electrostatic Monte Carlo simulations, where randomly oriented homogeneous prism-shaped inclusions occupy random positions in the background phase. The computation cost of solving the electrostatic problem by a finite-element code is decreased by the use of an averaging method where the same simulated sample is solved three times with orthogonal field directions. This helps to minimize the artificial anisotropy that results from the pseudorandomness inherent in the limited computational domains. All the required parameters for numerical simulations are calculated from the lattice structure of titanium dioxide. The results show a very good agreement between the measured and numerically calculated effective permittivities. When the prisms are approximated by oblate spheroids with the corresponding axial ratio, a fairly good prediction for the effective permittivity of the mixture can be achieved with the use of an advanced analytical mixing formula.

  5. Cohesive Zone Model Based Numerical Analysis of Steel-Concrete Composite Structure Push-Out Tests

    Directory of Open Access Journals (Sweden)

    J. P. Lin

    2014-01-01

    Full Text Available Push-out tests were widely used to determine the shear bearing capacity and shear stiffness of shear connectors in steel-concrete composite structures. The finite element method was one efficient alternative to push-out testing. This paper focused on a simulation analysis of the interface between concrete slabs and steel girder flanges as well as the interface of the shear connectors and the surrounding concrete. A cohesive zone model was used to simulate the tangential sliding and normal separation of the interfaces. Then, a zero-thickness cohesive element was implemented via the user-defined element subroutine UEL in the software ABAQUS, and a multiple broken line mode was used to define the constitutive relations of the cohesive zone. A three-dimensional numerical analysis model was established for push-out testing to analyze the load-displacement curves of the push-out test process, interface relative displacement, and interface stress distribution. This method was found to accurately calculate the shear capacity and shear stiffness of shear connectors. The numerical results showed that the multiple broken lines mode cohesive zone model could describe the nonlinear mechanical behavior of the interface between steel and concrete and that a discontinuous deformation numerical simulation could be implemented.

  6. Pricing index-based catastrophe bonds: Part 1: Formulation and discretization issues using a numerical PDE approach

    Science.gov (United States)

    Unger, André J. A.

    2010-02-01

    This work is the first installment in a two-part series, and focuses on the development of a numerical PDE approach to price components of a Bermudan-style callable catastrophe (CAT) bond. The bond is based on two underlying stochastic variables; the PCS index which posts quarterly estimates of industry-wide hurricane losses as well as a single-factor CIR interest rate model for the three-month LIBOR. The aggregate PCS index is analogous to losses claimed under traditional reinsurance in that it is used to specify a reinsurance layer. The proposed CAT bond model contains a Bermudan-style call feature designed to allow the reinsurer to minimize their interest rate risk exposure on making substantial fixed coupon payments using capital from the reinsurance premium. Numerical PDE methods are the fundamental strategy for pricing early-exercise constraints, such as the Bermudan-style call feature, into contingent claim models. Therefore, the objective and unique contribution of this first installment in the two-part series is to develop a formulation and discretization strategy for the proposed CAT bond model utilizing a numerical PDE approach. Object-oriented code design is fundamental to the numerical methods used to aggregate the PCS index, and implement the call feature. Therefore, object-oriented design issues that relate specifically to the development of a numerical PDE approach for the component of the proposed CAT bond model that depends on the PCS index and LIBOR are described here. Formulation, numerical methods and code design issues that relate to aggregating the PCS index and introducing the call option are the subject of the companion paper.

  7. Variability Abstractions: Trading Precision for Speed in Family-Based Analyses

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar; Brabrand, Claus; Wasowski, Andrzej

    2015-01-01

    Family-based (lifted) data-flow analysis for Software Product Lines (SPLs) is capable of analyzing all valid products (variants) without generating any of them explicitly. It takes as input only the common code base, which encodes all variants of a SPL, and produces analysis results corresponding...

  8. Variability-Specific Abstraction Refinement for Family-Based Model Checking

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar; Wasowski, Andrzej

    2017-01-01

    and property, while the number of possible scenarios is very large. In this work, we present an automatic iterative abstraction refinement procedure for family-based model checking. We use Craig interpolation to refine abstract variational models based on the obtained spurious counterexamples (traces...

  9. The importance of longitudinal studies in family medicine: experiences of two practice-based research networks.

    NARCIS (Netherlands)

    Weel, C. van; Weel-Baumgarten, E.M. van; Mold, J.

    2006-01-01

    BACKGROUND: For evidence-based decision making in family practice, it is essential to know the long-term (natural) course of common diseases and their outcomes under care and treatment. This article, based on a research methodology workshop, aims to raise awareness and interest in longitudinal

  10. A multivariate family-based association test using generalized estimating equations : FBAT-GEE

    NARCIS (Netherlands)

    Lange, C; Silverman, SK; Xu, [No Value; Weiss, ST; Laird, NM

    In this paper we propose a multivariate extension of family-based association tests based on generalized estimating equations. The test can be applied to multiple phenotypes and to phenotypic data obtained in longitudinal studies without making any distributional assumptions for the phenotypic

  11. Family, employment, and individual resource-based antecedents of maternal work-family enrichment from infancy through middle childhood.

    Science.gov (United States)

    Zhou, Nan; Buehler, Cheryl

    2016-07-01

    This study used data from the National Institute of Child Health and Human Development (NICHD) Study of Early Child Care and Youth Development (N = 1,019) to examine family, employment, and individual antecedents of maternal work-family enrichment from infancy through middle childhood. Work-family conflict and important confounding factors were controlled. From the family domain, higher income-to-needs ratio and social support were associated with higher work-family enrichment. From the employment domain, greater job rewards, benefits of employment for children, and work commitment were associated with higher work-family enrichment. From the individual domain, higher maternal education and extroversion were associated with higher work-family enrichment. No family, employment, and individual characteristics were associated with work-family conflict across time except for partner intimacy. In general, the results supported antecedents of work-family enrichment that supply needed resources. The present study contributed to the literature by identifying antecedents of maternal work-family enrichment across early child developmental stages, which goes beyond examinations of particular life stages and a work-family conflict perspective. Implications for theory and practice are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  12. Family, Employment, and Individual Resource-Based Antecedents of Maternal Work-Family Enrichment from Infancy through Middle Childhood

    Science.gov (United States)

    Zhou, Nan; Buehler, Cheryl

    2015-01-01

    This study used data from the NICHD Study of Early Child Care and Youth Development (N = 1,019) to examine family, employment, and individual antecedents of maternal work-family enrichment from infancy through middle childhood. Work-family conflict and important confounding factors were controlled. From the family domain, higher income-to-needs ratio and social support were associated with higher work-family enrichment. From the employment domain, greater job rewards, benefits of employment for children, and work commitment were associated with higher work-family enrichment. From the individual domain, higher maternal education and extroversion were associated with higher work-family enrichment. No family, employment, and individual characteristics were associated with work-family conflict across time except for partner intimacy. In general, the results supported antecedents of work-family enrichment that supply needed resources. The present study contributed to the literature by identifying antecedents of maternal work-family enrichment across early child developmental stages, which goes beyond examinations of particular life stages and a work-family conflict perspective. Implications for theory and practice are discussed. PMID:26641483

  13. Scattered Families : Transnational family life of Afghan refugees in the Netherlands in the light of the human rights based protection of the family

    NARCIS (Netherlands)

    Muller, P.H.A.M|info:eu-repo/dai/nl/165624647

    2009-01-01

    This study focuses on family life of Afghan refugees in the Netherlands, within and across borders. While family life constitutes a foundation in the lives of human beings, the disruption of the family through external causes has a huge impact on the people involved. In the case of refugees, many of

  14. Investigation of the Rock Fragmentation Process by a Single TBM Cutter Using a Voronoi Element-Based Numerical Manifold Method

    Science.gov (United States)

    Liu, Quansheng; Jiang, Yalong; Wu, Zhijun; Xu, Xiangyu; Liu, Qi

    2018-04-01

    In this study, a two-dimensional Voronoi element-based numerical manifold method (VE-NMM) is developed to analyze the granite fragmentation process by a single tunnel boring machine (TBM) cutter under different confining stresses. A Voronoi tessellation technique is adopted to generate the polygonal grain assemblage to approximate the microstructure of granite sample from the Gubei colliery of Huainan mining area in China. A modified interface contact model with cohesion and tensile strength is embedded into the numerical manifold method (NMM) to interpret the interactions between the rock grains. Numerical uniaxial compression and Brazilian splitting tests are first conducted to calibrate and validate the VE-NMM models based on the laboratory experiment results using a trial-and-error method. On this basis, numerical simulations of rock fragmentation by a single TBM cutter are conducted. The simulated crack initiation and propagation process as well as the indentation load-penetration depth behaviors in the numerical models accurately predict the laboratory indentation test results. The influence of confining stress on rock fragmentation is also investigated. Simulation results show that radial tensile cracks are more likely to be generated under a low confining stress, eventually coalescing into a major fracture along the loading axis. However, with the increase in confining stress, more side cracks initiate and coalesce, resulting in the formation of rock chips at the upper surface of the model. In addition, the peak indentation load also increases with the increasing confining stress, indicating that a higher thrust force is usually needed during the TBM boring process in deep tunnels.

  15. Understanding of Object Detection Based on CNN Family and YOLO

    Science.gov (United States)

    Du, Juan

    2018-04-01

    As a key use of image processing, object detection has boomed along with the unprecedented advancement of Convolutional Neural Network (CNN) and its variants since 2012. When CNN series develops to Faster Region with CNN (R-CNN), the Mean Average Precision (mAP) has reached 76.4, whereas, the Frame Per Second (FPS) of Faster R-CNN remains 5 to 18 which is far slower than the real-time effect. Thus, the most urgent requirement of object detection improvement is to accelerate the speed. Based on the general introduction to the background and the core solution CNN, this paper exhibits one of the best CNN representatives You Only Look Once (YOLO), which breaks through the CNN family’s tradition and innovates a complete new way of solving the object detection with most simple and high efficient way. Its fastest speed has achieved the exciting unparalleled result with FPS 155, and its mAP can also reach up to 78.6, both of which have surpassed the performance of Faster R-CNN greatly. Additionally, compared with the latest most advanced solution, YOLOv2 achieves an excellent tradeoff between speed and accuracy as well as an object detector with strong generalization ability to represent the whole image.

  16. Parameter Estimation for Partial Differential Equations by Collage-Based Numerical Approximation

    Directory of Open Access Journals (Sweden)

    Xiaoyan Deng

    2009-01-01

    into a minimization problem of a function of several variables after the partial differential equation is approximated by a differential dynamical system. Then numerical schemes for solving this minimization problem are proposed, including grid approximation and ant colony optimization. The proposed schemes are applied to a parameter estimation problem for the Belousov-Zhabotinskii equation, and the results show that the proposed approximation method is efficient for both linear and nonlinear partial differential equations with respect to unknown parameters. At worst, the presented method provides an excellent starting point for traditional inversion methods that must first select a good starting point.

  17. A numerical study of crack initiation in a bcc iron system based on dynamic bifurcation theory

    International Nuclear Information System (INIS)

    Li, Xiantao

    2014-01-01

    Crack initiation under dynamic loading conditions is studied under the framework of dynamic bifurcation theory. An atomistic model for BCC iron is considered to explicitly take into account the detailed molecular interactions. To understand the strain-rate dependence of the crack initiation process, we first obtain the bifurcation diagram from a computational procedure using continuation methods. The stability transition associated with a crack initiation, as well as the connection to the bifurcation diagram, is studied by comparing direct numerical results to the dynamic bifurcation theory [R. Haberman, SIAM J. Appl. Math. 37, 69–106 (1979)].

  18. Numerical modelling of softwood time-dependent behaviour based on microstructure

    DEFF Research Database (Denmark)

    Engelund, Emil Tang

    2010-01-01

    The time-dependent mechanical behaviour of softwood such as creep or relaxation can be predicted, from knowledge of the microstructural arrangement of the cell wall, by applying deformation kinetics. This has been done several times before; however, often without considering the constraints defined...... by the basic physical mechanism behind the time-dependent behaviour. The mechanism causing time-dependency is thought to be sliding of the microfibrils past each other as a result breaking and re-bonding of hydrogen bonds. This can be incorporated in a numerical model by only allowing time-dependency in shear...

  19. Research of power fuel low-temperature vortex combustion in industrial boiler based on numerical modelling

    Directory of Open Access Journals (Sweden)

    Orlova K.Y.

    2017-01-01

    Full Text Available The goal of the presented research is to perform numerical modelling of fuel low-temperature vortex combustion in once-through industrial steam boiler. Full size and scaled-down furnace model created with FIRE 3D software and was used for the research. All geometrical features were observed. The baseline information for the low-temperature vortex furnace process are velocity and temperature of low, upper and burner blast, air-fuel ratio, fuel consumption, coal dust size range. The obtained results are: temperature and velocity three dimensional fields, furnace gases and solid fuel ash particles concentration.

  20. A Numerical Method for Partial Differential Algebraic Equations Based on Differential Transform Method

    Directory of Open Access Journals (Sweden)

    Murat Osmanoglu

    2013-01-01

    Full Text Available We have considered linear partial differential algebraic equations (LPDAEs of the form , which has at least one singular matrix of . We have first introduced a uniform differential time index and a differential space index. The initial conditions and boundary conditions of the given system cannot be prescribed for all components of the solution vector here. To overcome this, we introduced these indexes. Furthermore, differential transform method has been given to solve LPDAEs. We have applied this method to a test problem, and numerical solution of the problem has been compared with analytical solution.

  1. Description of an identification method of thermocouple time constant based on application of recursive numerical filtering to temperature fluctuation

    International Nuclear Information System (INIS)

    Bernardin, B.; Le Guillou, G.; Parcy, JP.

    1981-04-01

    Usual spectral methods, based on temperature fluctuation analysis, aiming at thermocouple time constant identification are using an equipment too much sophisticated for on-line application. It is shown that numerical filtering is optimal for this application, the equipment is simpler than for spectral methods and less samples of signals are needed for the same accuracy. The method is described and a parametric study was performed using a temperature noise simulator [fr

  2. Semi-empirical γ-ray peak efficiency determination including self-absorption correction based on numerical integration

    International Nuclear Information System (INIS)

    Noguchi, M.; Takeda, K.; Higuchi, H.

    1981-01-01

    A method of γ-ray efficiency determination for extended (plane or bulk) samples based on numerical integration of point source efficiency is studied. The proposed method is widely applicable to samples of various shapes and materials. The geometrical factor in the peak efficiency can easily be corrected for by simply changing the integration region, and γ-ray self-absorption is also corrected by the absorption coefficients for the sample matrix. (author)

  3. Feasibility of Recruiting Families into a Heart Disease Prevention Program Based on Dietary Patterns

    Directory of Open Access Journals (Sweden)

    Tracy L. Schumacher

    2015-08-01

    Full Text Available Offspring of parents with a history of cardiovascular disease (CVD inherit a similar genetic profile and share diet and lifestyle behaviors. This study aimed to evaluate the feasibility of recruiting families at risk of CVD to a dietary prevention program, determine the changes in diet achieved, and program acceptability. Families were recruited into a pilot parallel group randomized controlled trial consisting of a three month evidence-based dietary intervention, based on the Mediterranean and Portfolio diets. Feasibility was assessed by recruitment and retention rates, change in diet by food frequency questionnaire, and program acceptability by qualitative interviews and program evaluation. Twenty one families were enrolled over 16 months, with fourteen families (n = 42 individuals completing the study. Post-program dietary changes in the intervention group included small daily increases in vegetable serves (0.8 ± 1.3 and reduced usage of full-fat milk (−21%, cheese (−12% and meat products (−17%. Qualitative interviews highlighted beneficial changes in food purchasing habits. Future studies need more effective methods of recruitment to engage families in the intervention. Once engaged, families made small incremental improvements in their diets. Evaluation indicated that feedback on diet and CVD risk factors, dietetic counselling and the resources provided were appropriate for a program of this type.

  4. Feasibility of Recruiting Families into a Heart Disease Prevention Program Based on Dietary Patterns.

    Science.gov (United States)

    Schumacher, Tracy L; Burrows, Tracy L; Thompson, Deborah I; Spratt, Neil J; Callister, Robin; Collins, Clare E

    2015-08-21

    Offspring of parents with a history of cardiovascular disease (CVD) inherit a similar genetic profile and share diet and lifestyle behaviors. This study aimed to evaluate the feasibility of recruiting families at risk of CVD to a dietary prevention program, determine the changes in diet achieved, and program acceptability. Families were recruited into a pilot parallel group randomized controlled trial consisting of a three month evidence-based dietary intervention, based on the Mediterranean and Portfolio diets. Feasibility was assessed by recruitment and retention rates, change in diet by food frequency questionnaire, and program acceptability by qualitative interviews and program evaluation. Twenty one families were enrolled over 16 months, with fourteen families (n = 42 individuals) completing the study. Post-program dietary changes in the intervention group included small daily increases in vegetable serves (0.8 ± 1.3) and reduced usage of full-fat milk (-21%), cheese (-12%) and meat products (-17%). Qualitative interviews highlighted beneficial changes in food purchasing habits. Future studies need more effective methods of recruitment to engage families in the intervention. Once engaged, families made small incremental improvements in their diets. Evaluation indicated that feedback on diet and CVD risk factors, dietetic counselling and the resources provided were appropriate for a program of this type.

  5. Gene Environment Interactions and Predictors of Colorectal Cancer in Family-Based, Multi-Ethnic Groups.

    Science.gov (United States)

    Shiao, S Pamela K; Grayson, James; Yu, Chong Ho; Wasek, Brandi; Bottiglieri, Teodoro

    2018-02-16

    For the personalization of polygenic/omics-based health care, the purpose of this study was to examine the gene-environment interactions and predictors of colorectal cancer (CRC) by including five key genes in the one-carbon metabolism pathways. In this proof-of-concept study, we included a total of 54 families and 108 participants, 54 CRC cases and 54 matched family friends representing four major racial ethnic groups in southern California (White, Asian, Hispanics, and Black). We used three phases of data analytics, including exploratory, family-based analyses adjusting for the dependence within the family for sharing genetic heritage, the ensemble method, and generalized regression models for predictive modeling with a machine learning validation procedure to validate the results for enhanced prediction and reproducibility. The results revealed that despite the family members sharing genetic heritage, the CRC group had greater combined gene polymorphism rates than the family controls ( p relation to gene-environment interactions in the prevention of CRC.

  6. Improving Access to Quality Care in Family Planning: WHO's Four Cornerstones of Evidence-based Guidance

    Institute of Scientific and Technical Information of China (English)

    Shang-chun WU; Yan ZOU; K Church; O Meirik

    2007-01-01

    The four cornerstones of guidance in technique service of family planning are established by WHO based on high quality evidences. They have been updated according to the appearing new evidences, and the consensuses were reached by the international experts in this field. The four documents include Medical Eligibility Criteria for Contraceptive Use, Selected Practice Recommendations for Contraceptive Use, Decision-making Tool for Family Planning Clients and Providers and The Global Handbook for Family Planning Providers. The first two documents mainlyface to the policy-makers and programme managers and were treated as the important references for creating the local guideline. The other two documents were developed for the front-line health-care and family planning providers at different levels, which include plenty of essential technical information to help providers improve their ability in service delivery and counselling. China paid great attention to the introduction and application of WHO guidelines. As soon as the newer editions of these documents were available, the Chinese version would be followed. WHO guidelines have been primarily adapted with the newly issued national guideline, The Clinical Practical Skill Guidelines- Family Planning Part, which was established by China Medical Association. At the same time, the WHO guidelines have been introduced to some of the linicians and family planning providers at different levels. In the future, more special training courses will be introduced to the township level based on the needs of grassroot providers.

  7. Family Physician Readiness for Value-Based Payments: Does Ownership Status Matter?

    Science.gov (United States)

    Robertson-Cooper, Heidy; Neaderhiser, Bradley; Happe, Laura E; Beveridge, Roy A

    2017-10-01

    Value-based payments are rapidly replacing fee-for-service arrangements, necessitating advancements in physician practice capabilities and functions. The objective of this study was to examine potential differences among family physicians who are owners versus employed with respect to their readiness for value-based payment models. The authors surveyed more than 550 family physicians from the American Academy of Family Physician's membership; nearly 75% had made changes to participate in value-based payments. However, owners were significantly more likely to report that their practices had made no changes in value-based payment capabilities than employed physicians (owners 35.2% vs. employed 18.1%, P value-based practice capabilities were not as advanced as the employed physician group: (1) quality improvement strategies, (2) human capital investment, and (3) identification of high-risk patients. Specifically, the employed physician group reported more quality improvement strategies, including quality measures, Plan-Do-Study-Act, root cause analysis, and Lean Six Sigma (P value-based payments, consideration of different population health management needs according to ownership status has the potential to support the adoption of value-based care delivery for family physicians.

  8. Intergenerational patterns of family violence related to alcohol abuse: a genogram-based study

    Directory of Open Access Journals (Sweden)

    Cláudia Silveira Tondowski

    2014-12-01

    Full Text Available The objective of this study was to analyze intergenerational patterns of alcohol related violence (ARV. An intentional sample comprising 42 family members was selected according to a set of criteria, including history of ARV. A genogram based on anonymous semi-structured taped interviews was created. The Content Analysis pointed to different patterns of repetition of intergenerational ARV. The most recurrent ones were those of lineal consanguinity (father/son and through marriage. We observed similarities over the generations of each family as regards the pattern of alcohol consumption; the type of violence; the family reaction and the family life cycle in which ARV was intensified. Our results confirm the intergenerational reproduction of ARV. In conclusion, it is important to create intervention strategies to prevent intergenerational repetition of this association of behaviors.

  9. Temperature prediction in a coal fired boiler with a fixed bed by fuzzy logic based on numerical solution

    International Nuclear Information System (INIS)

    Biyikoglu, A.; Akcayol, M.A.; Oezdemir, V.; Sivrioglu, M.

    2005-01-01

    In this study, steady state combustion in boilers with a fixed bed has been investigated. Temperature distributions in the combustion chamber of a coal fired boiler with a fixed bed are predicted using fuzzy logic based on data obtained from the numerical solution method for various coal and air feeding rates. The numerical solution method and the discretization of the governing equations of two dimensional turbulent flow in the combustion chamber and one dimensional coal combustion in the fixed bed are explained. Control Volume and Finite Difference Methods are used in the discretization of the equations in the combustion chamber and in the fixed bed, respectively. Results are presented as contours within the solution domain and compared with numerical ones. Comparison of the results shows that the difference between the numerical solution and fuzzy logic prediction throughout the computational domain is less than 1.5%. The statistical coefficient of multiple determinations for the investigated cases is about 0.9993 to 0.9998. This accuracy degree is acceptable in predicting the temperature values. So, it can be concluded that fuzzy logic provides a feasible method for defining the system properties

  10. THE COOPERATIVE WORK AND FAMILY FARMING ECOLOGICALLY BASED: ACTIONS FOR SUSTAINABLE DEVELOPMENT FROM THE LOCAL REALITY

    Directory of Open Access Journals (Sweden)

    Fabiana da Silva Andersson

    2012-11-01

    Full Text Available This study aimed to characterize the associated farmers to Cooperativa Sul Ecológica de Agricultores Familiares Ltda., and to understand the organization of the cooperative institution. For this, we conducted semi-structured interviews with the family farmers ecological base and development agents along Cooperative, together the use of secondary sources. Since the Cooperative presents their work ethics and press for horizontal beginning, it allows collective decision making. In addition, your audience - family farmers ecological base - has an active history of sustainable and cooperative work. Therefore, we can measure both the public research on the family farm as the institution Cooperativa Sul Ecológica actual actions and what Costabeber & Caporal established as ecologically based agriculture.

  11. Family-based processes associated with adolescent distress, substance use and risky sexual behavior in families affected by maternal HIV.

    Science.gov (United States)

    Lester, Patricia; Stein, Judith A; Bursch, Brenda; Rice, Eric; Green, Sara; Penniman, Typhanye; Rotheram-Borus, Mary Jane

    2010-01-01

    The present study investigated how maternal HIV and mediating family processes are associated with adolescent distress, substance use, and risky sexual behavior. Mother-adolescent (ages 12-21) dyads (N = 264) were recruited from neighborhoods where the HIV-affected families resided (161 had mothers with HIV). Mediating family processes were youth aggressive conflict style, maternal bonding, maternal role reversal expectations, and overall family functioning. Results of structural equation modeling indicated that youth aggressive conflict resolution style was strongly associated with adolescent distress, substance use, and risky sexual behavior. In HIV-affected families, youth less frequently reported using an aggressive conflict resolution style and more frequently reported positive maternal bonds; their mothers reported less positive family functioning than control families. Finally, maternal distress indirectly affected adolescent distress and risk behavior via youth aggressive conflict resolution style.

  12. Numerical simulation of conjugate heat transfer in electronic cooling and analysis based on field synergy principle

    International Nuclear Information System (INIS)

    Cheng, Y.P.; Lee, T.S.; Low, H.T.

    2008-01-01

    In this paper, the conjugate heat transfer in electronic cooling is numerically simulated with the newly proposed algorithm CLEARER on collocated grid. Because the solid heat source and substrate are isolated from the boundary, special attention is given to deal with the velocity and temperature in the solid region in the full field computation. The influence of openings on the substrate, heat source height and their distribution along the substrate on the maximum temperature and overall Nusselt number is investigated. The numerical results show that the openings on the substrate can enhance the heat transfer as well as increasing the heat source height, meanwhile, by arranging the heat sources coarsely in the front part and densely in the rear part of the substrate, the thermal performance can also be increased. Then the results are analyzed from the viewpoint of field synergy principle, and it is shown that the heat transfer improvement can all be attributed to the better synergy between the velocity field and temperature field, which may offer some guidance in the design of electronic devices

  13. Numerical modelling of levee stability based on coupled mechanical, thermal and hydrogeological processes

    Directory of Open Access Journals (Sweden)

    Dwornik Maciej

    2016-01-01

    Full Text Available The numerical modelling of coupled mechanical, thermal and hydrogeological processes for a soil levee is presented in the paper. The modelling was performed for a real levee that was built in Poland as a part of the ISMOP project. Only four parameters were changed to build different flood waves: the water level, period of water increase, period of water decrease, and period of low water level after the experiment. Results of numerical modelling shows that it is possible and advisable to calculate simultaneously changes of thermal and hydro-mechanical fields. The presented results show that it is also possible to use thermal sensors in place of more expensive pore pressure sensors, with some limitations. The results of stability analysis show that the levee is less stable when the water level decreases, after which factor of safety decreases significantly. For all flooding wave parameters described in the paper, the levee is very stable and factor of safety variations for any particular stage were not very large.

  14. Families, Powered On: Improving Family Engagement in Early Childhood Education through Technology. Policy Brief

    Science.gov (United States)

    Daugherty, Lindsay; Dossani, Rafiq; Johnson, Erin-Elizabeth; Wright, Cameron

    2014-01-01

    Family engagement in the education of young children is associated with numerous positive outcomes for those children, and parents and other family members play an important role as "teachers" during the time children spend outside the classroom. Home-based involvement (e.g., a parent-led educational activity), school-based involvement…

  15. Genomic prediction in families of perennial ryegrass based on genotyping-by-sequencing

    DEFF Research Database (Denmark)

    Ashraf, Bilal

    In this thesis we investigate the potential for genomic prediction in perennial ryegrass using genotyping-by-sequencing (GBS) data. Association method based on family-based breeding systems was developed, genomic heritabilities, genomic prediction accurancies and effects of some key factors wer...... explored. Results show that low sequencing depth caused underestimation of allele substitution effects in GWAS and overestimation of genomic heritability in prediction studies. Other factors susch as SNP marker density, population structure and size of training population influenced accuracy of genomic...... prediction. Overall, GBS allows for genomic prediction in breeding families of perennial ryegrass and holds good potential to expedite genetic gain and encourage the application of genomic prediction...

  16. A Review of Technology-Based Youth and Family-Focused Interventions.

    Science.gov (United States)

    MacDonell, Kathleen Watson; Prinz, Ronald J

    2017-06-01

    In the past 10 years, mental and behavioral health has seen a proliferation of technology-based interventions in the form of online and other computer-delivered programs. This paper focuses on technology-based treatment and preventive interventions aimed at benefitting children and adolescents via either involving the parents and families, or only the youth. The review considered only technology-based interventions that had at least one published study with a randomized controlled trial design. Questions being addressed included: (1) What are the technology-based interventions in the mental/behavioral health area that have been systematically evaluated in published studies? (2) What are the common and unique characteristics of these interventions and their application with respect to sample characteristics, target problems, and technology characteristics (platforms, structures, elements, and communication formats)? and (3) Which intervention approaches and strategies have accrued the greatest evidence? The review identified 30 technology-based psychosocial interventions for children and families, 19 of which were parent or family-focused (32 studies) and 11 of which were youth-focused (in 13 studies). For the parent/family-focused interventions, greatest promise was found in those that addressed either youth behavioral problems or depressive/anxious symptoms, as well as more general bolstering of parenting efficacy. The youth-focused interventions showed some promise in reducing depressive/anxious symptoms. Advantages and disadvantages of the technology-based approaches were considered, and areas for future research and development were discussed.

  17. Simplex-based optimization of numerical and categorical inputs in early bioprocess development: Case studies in HT chromatography.

    Science.gov (United States)

    Konstantinidis, Spyridon; Titchener-Hooker, Nigel; Velayudhan, Ajoy

    2017-08-01

    Bioprocess development studies often involve the investigation of numerical and categorical inputs via the adoption of Design of Experiments (DoE) techniques. An attractive alternative is the deployment of a grid compatible Simplex variant which has been shown to yield optima rapidly and consistently. In this work, the method is combined with dummy variables and it is deployed in three case studies wherein spaces are comprised of both categorical and numerical inputs, a situation intractable by traditional Simplex methods. The first study employs in silico data and lays out the dummy variable methodology. The latter two employ experimental data from chromatography based studies performed with the filter-plate and miniature column High Throughput (HT) techniques. The solute of interest in the former case study was a monoclonal antibody whereas the latter dealt with the separation of a binary system of model proteins. The implemented approach prevented the stranding of the Simplex method at local optima, due to the arbitrary handling of the categorical inputs, and allowed for the concurrent optimization of numerical and categorical, multilevel and/or dichotomous, inputs. The deployment of the Simplex method, combined with dummy variables, was therefore entirely successful in identifying and characterizing global optima in all three case studies. The Simplex-based method was further shown to be of equivalent efficiency to a DoE-based approach, represented here by D-Optimal designs. Such an approach failed, however, to both capture trends and identify optima, and led to poor operating conditions. It is suggested that the Simplex-variant is suited to development activities involving numerical and categorical inputs in early bioprocess development. © 2017 The Authors. Biotechnology Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. EXPERIMENTAL STUDIES AND NUMERICAL ANALYSIS FOR THE DEFORMATIONSTRENGTH CHARACTERISTICS OF RAMMED MICRO-PILES WITH A BROADENED AGGREGATE BASE

    Directory of Open Access Journals (Sweden)

    V. S. Alekhin

    2016-01-01

    Full Text Available Objectives. Experimental and theoretical determination of dependencies of strength characteristics of bored micropiles with a pedestal formed by rammed rubble on: casing diameter, fraction, and volume of crushed stone for collapsing macroporous clays. Method. Laboratory and field experiments were carried out; numerical calculations in two-dimensional and threedimensional arrangement for the determination of strain-stress analysis of the foundation using a MIDAS GTS_NX software system, implementing the finite element method and developed for complex geotechnical problems; some recommendations for implementation are provided. Results The dependence of the load-bearing capacity of bored micropiles on a broadened base of rammed aggregate with vertical loading is determined. At the maximum broadening diameter of 3.5 of the micropiles shaft the load-bearing capacity of the subsoil is increased by between 1.8 and 6 times compared with micropiles without broadening depending on the diameter of the pile shaft. During the experimental and numerical studies of the dependencies of deformation-strength parameters of the deep foundation works consisting of a bored micropile with a broadened base, namely the pile diameter, aggregate particle size and volume, seal diameter of the subsoil soil half-space, as well as the development of the theory of formation of the end broadening geometry of rammed aggregate in the form of an ellipsoid of revolution were established. Conclusion The full-scale measurements of the broadening of bored micropiles showed that their shape is close to an ellipsoid of revolution, and the ratio of semi-axes is directly dependent on the characteristics of soil and gravel volume, which was taken into account in the construction of the finite element model in the numerical simulation experiment.The results of numerical studies of the bored micropile loading with broadened base on the MIDAS GTS show good agreement with the results of the

  19. Family-based treatment of eating disorders in adolescents: current insights

    Directory of Open Access Journals (Sweden)

    Rienecke RD

    2017-06-01

    Full Text Available Renee D Rienecke1–3 1Department of Pediatrics, 2Department of Psychiatry and Behavioral Sciences, College of Medicine, Medical University of South Carolina, Charleston, SC, 3Department of Psychiatry, University of Michigan Health System, Ann Arbor, MI, USA Abstract: Eating disorders are serious illnesses associated with significant morbidity and mortality. Family-based treatment (FBT has emerged as an effective intervention for adolescents with anorexia nervosa, and preliminary evidence suggests that it may be efficacious in the treatment of adolescents with bulimia nervosa. Multifamily therapy for anorexia nervosa provides a more intensive experience for families needing additional support. This review outlines the three phases of treatment, key tenets of family-based treatment, and empirical support for FBT. In addition, FBT in higher levels of care is described, as well as challenges in the implementation of FBT and recent adaptations to FBT, including offering additional support to eating-disorder caregivers. Future research is needed to identify families for whom FBT does not work, determine adaptations to FBT that may increase its efficacy, develop ways to improve treatment adherence among clinicians, and find ways to support caregivers better during treatment. Keywords: eating disorders, adolescents, family-based therapy, anorexia nervosa, bulimia nervosa

  20. A family-based joint test for mean and variance heterogeneity for quantitative traits.

    Science.gov (United States)

    Cao, Ying; Maxwell, Taylor J; Wei, Peng

    2015-01-01

    Traditional quantitative trait locus (QTL) analysis focuses on identifying loci associated with mean heterogeneity. Recent research has discovered loci associated with phenotype variance heterogeneity (vQTL), which is important in studying genetic association with complex traits, especially for identifying gene-gene and gene-environment interactions. While several tests have been proposed to detect vQTL for unrelated individuals, there are no tests for related individuals, commonly seen in family-based genetic studies. Here we introduce a likelihood ratio test (LRT) for identifying mean and variance heterogeneity simultaneously or for either effect alone, adjusting for covariates and family relatedness using a linear mixed effect model approach. The LRT test statistic for normally distributed quantitative traits approximately follows χ(2)-distributions. To correct for inflated Type I error for non-normally distributed quantitative traits, we propose a parametric bootstrap-based LRT that removes the best linear unbiased prediction (BLUP) of family random effect. Simulation studies show that our family-based test controls Type I error and has good power, while Type I error inflation is observed when family relatedness is ignored. We demonstrate the utility and efficiency gains of the proposed method using data from the Framingham Heart Study to detect loci associated with body mass index (BMI) variability. © 2014 John Wiley & Sons Ltd/University College London.

  1. Numerical relativity

    International Nuclear Information System (INIS)

    Piran, T.

    1982-01-01

    There are many recent developments in numerical relativity, but there remain important unsolved theoretical and practical problems. The author reviews existing numerical approaches to solution of the exact Einstein equations. A framework for classification and comparison of different numerical schemes is presented. Recent numerical codes are compared using this framework. The discussion focuses on new developments and on currently open questions, excluding a review of numerical techniques. (Auth.)

  2. The home-based maternal record: a tool for family involvement in health care.

    Science.gov (United States)

    Shah, P M; Shah, K P; Belsey, M A

    1988-04-01

    The home-based maternal record offers an opportunity for family involvement in health care. Home-based records of maternal health have been used in several developing countries, and have led to increased detection and monitoring of women at high risk for complications during pregnancy. Home-based cards that include menstrual information remind health workers to educate and motivate women for family planning, and serve as a source of health statistics. Records that use pictures and symbols have been used by illiterate traditional birth attendants, and had an accurate completion rate of over 90%. The WHO has prepared a prototype record and guidelines for local adaptation. The objectives were to provide continuity of care throughout pregnancy, ensure recognition of at-risk women, encourage family participation in health care, an provide data on maternal health, breastfeeding, and family planning. The guidelines have been evaluated and results show that the records have improved the coverage, acceptability, and quality of MCH/FP care. The records have also led to an increase in diagnosis and referral of at-risk women and newborns, and the use of family planning and tetanus toxoid immunization has increased in the 13 centers where the reports are being used. Focus group discussions have shown that mothers, community members, primary health workers, and doctors and nurses liked the records. It is important to adapt criteria for high-risk conditions to the local areas where the records will be used to ensure the relevance of risk diagnosis. The evidence shows that home-based maternal and child records can be an important tool in the promotion of self-reliance and family participation in health care. In addition, home-based records can be used for the implementation of primary health care at the local level, and serve as a resource for data collection.

  3. Numerical simulation of interior ballistic process of railgun based on the multi-field coupled model

    Directory of Open Access Journals (Sweden)

    Qinghua Lin

    2016-04-01

    Full Text Available Railgun launcher design relies on appropriate models. A multi-field coupled model of railgun launcher was presented in this paper. The 3D transient multi-field was composed of electromagnetic field, thermal field and structural field. The magnetic diffusion equations were solved by a finite-element boundary-element coupling method. The thermal diffusion equations and structural equations were solved by a finite element method. A coupled calculation was achieved by the transfer data from the electromagnetic field to the thermal and structural fields. Some characteristics of railgun shot, such as velocity skin effect, melt-wave erosion and magnetic sawing, which are generated under the condition of large-current and high-speed sliding electrical contact, were demonstrated by numerical simulation.

  4. A numerical model for the thermal history of rocks based on confined horizontal fission tracks

    International Nuclear Information System (INIS)

    Jensen, P.K.; Kunzendorf, Helmar; Hansen, Kirsten

    1992-01-01

    A numerical model for determination of the thermal history of rocks is presented. It is shown that the thermal history may be uniquely determined as a piece-by-piece linear function on the basis of etched confined, horizontal fission track length distributions, their surface densities, and the uranium content. The initial track length distribution is taken into account. A relation between the measured track length distribution and age is given which includes correction for partial annealing. The annealing model used is the fanning Arrhenius plot. It is shown that track length distributions measured in transmitted light are biased favouring short tracks compared with measurements in reflected light. Testing of the model is performed on apatites from a tuffaceous sandstone from Bornholm (Denmark) yielding an estimate of the thermal history for the period of about 280 Ma back in time. (author)

  5. Hydrodynamic Influence Dabanhu River Bridge Holes Widening Based on Two-Dimensional Finite Element Numerical Model

    Science.gov (United States)

    Li, Dong Feng; Bai, Fu Qing; Nie, Hui

    2018-06-01

    In order to analyze the influence of bridge holes widening on hydrodynamic such as water level, a two-dimensional mathematical model was used to calculate the hydrodynamic factors, river network flow velocity vector distribution is given, water level and difference of bridge widening before and after is calculated and charted, water surface gradient in seven different river sections near the upper reaches of bridges is counted and revealed. The results of hydrodynamic calculation indicate that The Maximum and the minimum deducing numerical value of the water level after bridge widening is 0.028m, and 0.018m respective. the seven sections water surface gradient becomes smaller until it becomes negative, the influence of bridge widening on the upstream is basically over, the range of influence is about 450m from the bridge to the upstream. reach

  6. Enhancing the numerical aperture of lenses using ZnO nanostructure-based turbid media

    International Nuclear Information System (INIS)

    Khokhra, Richa; Barman, Partha Bir; Kumar, Rajesh; Kumar, Manoj; Rawat, Nitin; Jang, Hwanchol; Lee, Heung-No

    2013-01-01

    Nanosheets, nanoparticles, and microstructures of ZnO were synthesized via a wet chemical method. ZnO films with a thickness of 44–46 μm were fabricated by spray coating, and these have been investigated for their potential use in turbid lens applications. A morphology-dependent comparative study of the transmittance of ZnO turbid films was conducted. Furthermore, these ZnO turbid films were used to enhance the numerical aperture (NA) of a Nikon objective lens. The variation in NA with different morphologies was explained using size-dependent scattering by the fabricated films. A maximum NA of around 1.971 of the objective lens with a turbid film of ZnO nanosheets was achieved. (paper)

  7. A numerical simulation of wheel spray for simplified vehicle model based on discrete phase method

    Directory of Open Access Journals (Sweden)

    Xingjun Hu

    2015-07-01

    Full Text Available Road spray greatly affects vehicle body soiling and driving safety. The study of road spray has attracted increasing attention. In this article, computational fluid dynamics software with widely used finite volume method code was employed to investigate the numerical simulation of spray induced by a simplified wheel model and a modified square-back model proposed by the Motor Industry Research Association. Shear stress transport k-omega turbulence model, discrete phase model, and Eulerian wall-film model were selected. In the simulation process, the phenomenon of breakup and coalescence of drops were considered, and the continuous and discrete phases were treated as two-way coupled in momentum and turbulent motion. The relationship between the vehicle external flow structure and body soiling was also discussed.

  8. Numerical Study of Electrostatic Field Distortion on LPTPC End-Plates based on Bulk Micromegas Modules

    Directory of Open Access Journals (Sweden)

    Bhattacharya Purba

    2018-01-01

    Full Text Available The R&D activities for the linear collider TPC (LC-TPC are currently working on the adoption of the micro pattern devices for the gaseous amplification stage. Several beam tests have been carried out at DESY with a 5 GeV electron beam in a 1 T superconducting magnet. We worked on a large prototype TPC with an end-plate that was built, for the first time, using seven resistive bulk Micromegas modules. During experiments, reduced signal sensitivity was observed at the boundary of these modules. Electrostatic field distortion near the module boundaries was considered to be the possible major reason behind these observations. In the present work, we will explore this hypothesis through numerical simulation. Our aim has been to understand the origin of distortions observed close to the edges of the test beam modules and to explore the possibility of using the Garfield simulation framework for investigating a phenomenon as complex as distortion.

  9. Study on blast furnace cooling stave for various refractory linings based on numerical modeling

    International Nuclear Information System (INIS)

    Mohanty, T R; Sahoo, S K; Moharana, M K

    2016-01-01

    Cooling technology for refractory lining of blast furnace is very important for the metallurgical industry, because it can substantially increase output and operation life of furnaces. A three dimensional mathematical model for the temperature field of the blast furnace stave cooler with refractory lining has been developed and analyzed. The temperature and heat dissipated by stave cooler is examined by using the finite element method. The cast steel stave is studied and computational analysis is made to know the effect of the cooling water velocity, temperature, and the lining material on the maximum temperature of the stave hot surface. The refractory lining materials, which are used in this experiment, are high alumina bricks with different stave materials (copper, aluminum and cast iron). The obtained numerical calculations are compared with that obtained from experiments performed at Rourkela Steel Plant, Odisha taking a stave in belly zone having maximum heat load shows very good agreement. (paper)

  10. Saturation of THz detection in InGaAs-based HEMTs: a numerical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mahi, A. [Centre Universitaire Nour Bachir, B.P. 900, 32000 El Bayadh (Algeria); Palermo, C., E-mail: christophe.palermo@umontpellier.fr [University of Montpellier, IES, UMR 5214, 34000 Montpellier (France); CNRS, IES, UMR 5214, 34000 Montpellier (France); Marinchio, H. [University of Montpellier, IES, UMR 5214, 34000 Montpellier (France); CNRS, IES, UMR 5214, 34000 Montpellier (France); Belgachi, A. [University of Bechar, Bechar 08000 (Algeria); Varani, L. [University of Montpellier, IES, UMR 5214, 34000 Montpellier (France); CNRS, IES, UMR 5214, 34000 Montpellier (France)

    2016-11-01

    By numerical simulations, we investigate the large-signal photoresponse of InGaAs high electron mobility transistors submitted to THz radiations. The used pseudo-2D hydrodynamic model considers electron density and velocity conservations equations. A third equation is solved, in order to describe average energy conservation or to maintain it constantly equal to its thermal equilibrium value. In both cases, the calculated photoresponse increases with the incoming power density for its smallest values. For the higher values, a saturation of the photoresponse is observed, in agreement with experimental results, only when the energy conservation is accounted for. This allows to relate the limitation of the transistor detection features to electron heating phenomenon.

  11. Evaluation of dynamic characteristics of hard rock based on numerical simulations of in situ rock tests

    International Nuclear Information System (INIS)

    Yamagami, Yuya; Ikusada, Koji; Jiang, Yujing

    2009-01-01

    In situ rock tests of hard rock of conglomerate in which discontinuities in high angle are dominant were conducted. In this study, in order to confirm the validity of the test results and the test condition, and in order to elucidate the deformation behaviour and the mechanism of shear strength of the rock mass, the numerical simulations of the in situ rock tests by using distinct element method were performed. As a result, it was clarified that the behaviour of the rock mass strongly depends on both geometrical distribution of discontinuities and those mechanical properties. It is thought that a series of evaluation processes showed in this study contribute to improve the reliability of the dynamic characteristic evaluation of the rock mass. (author)

  12. Clinical relevance of apolipoprotein E genotyping based on a family history of Alzheimer's disease.

    Science.gov (United States)

    Luckhoff, Hilmar K; Brand, Theresa; van Velden, Dawid P; Kidd, Martin; Fisher, Leslie R; van Rensburg, Susan J; Kotze, Maritha J

    2015-01-01

    Having a family history of Alzheimer' s disease (AD) may potentiate cumulative risk associated with phenotypic expression of the ε-4 allele of the apolipoprotein E (APOE) gene. In this study, we compared the genotype distribution and allele frequencies of APOE ε-2 (rs7412) and ε -4 (rs429358) in 537 South African individuals participating in a chronic disease screening program, in order to establish whether AD family history modulates the expression of their dyslipidemic effects. Significant differences in the genotype distribution for APOE ε-2 (p=0.034) as well as APOE ε-4 (p=0.038) were found between study participants with (n=67) and without (n=470) a family history of AD. LDL cholesterol levels were inversely associated with physical activity in the study group with a positive family history of AD (pfamilial hypercholesterolemia, clinical inquiry regarding family history was identified as an important determinant of eligibility for APOE genotyping performed in the context of chronic disease risk management. To our knowledge, this is the first study to demonstrate the modulating influence of AD family history on expression of a dyslipidemic phenotype associated with the APOE ε-4 allele. Our findings provide the scientific rationale supporting a novel clinical application for APOE genotyping as a means of identifying a genetic subgroup of dyslipidemic patients set to derive the greatest benefit from early lifestyle-based interventions aimed at decreasing cumulative risk for cardiovascular disease and prevention of AD later in life.

  13. Consumer Feedback following Participation in a Family-Based Intervention for Youth Mental Health

    Directory of Open Access Journals (Sweden)

    Andrew J. Lewis

    2012-01-01

    Full Text Available Background. This paper presents findings derived from consumer feedback, following a multicentre randomised controlled trial for adolescent mental health problems and substance misuse. The paper focuses on the implementation of a family-based intervention, including fidelity of delivery, family members’ experiences, and their suggestions for program improvements. Methods. Qualitative and quantitative data (n=21 were drawn from the Deakin Family Options trial consumer focus groups, which occurred six months after the completion of the trial. Consumer focus groups were held in both metropolitan and regional locations in Victoria, Australia. Findings. Overall reductions in parental isolation, increases in parental self-care, and increased separation/individuation were the key therapeutic features of the intervention. Sharing family experiences with other parents was a key supportive factor, which improved parenting confidence and efficacy and potentially reduced family conflict. Consumer feedback also led to further development of the intervention, with a greater focus on aiding parents to engage adolescents in services and addressing family factors related to adolescent’s mood and anxiety symptoms. Conclusions. Participant feedback provides valuable qualitative data, to monitor the fidelity of treatment implementation within a trial, to confirm predictions about the effective mechanisms of an intervention, and to inform the development of new interventions.

  14. The Fangshan/Family-based Ischemic Stroke Study In China (FISSIC protocol

    Directory of Open Access Journals (Sweden)

    Chen Dafang

    2007-09-01

    Full Text Available Abstract Background The exact etiology of ischemic stroke remains unclear, because multiple genetic predispositions and environmental risk factors may be involved, and their interactions dictate the complexity. Family-based studies provide unique features in design, while they are currently underrepresented for studies of ischemic stroke in developing countries. The Fangshan/Family-based Ischemic Stroke Study In China (FISSIC program aims to conduct a genetic pedigree study of ischemic stroke in rural communities of China. Methods/Design The pedigrees of ischemic stroke with clear documentation are recruited by using the proband-initiated contact method, based on the stroke registry in hospital and communities. Blood samples and detailed information of pedigrees are collected through the health care network in the rural area, and prospective follow-up of the pedigrees cohort is scheduled. Complementary strategies of both family-based design and matched case-spousal control design are used, and comprehensive statistical methods will be implemented to ascertain potential complex genetic and environmental factors and their interactions as well. Discussion This study is complementary to other genetic pedigree studies of ischemic stroke, such as the Siblings With Ischemic Stroke Study (SWISS, which are established in developed countries. We describe the protocol of this family-based genetic epidemiological study that may be used as a new practical guideline and research paradigm in developing countries and facilitate initiatives of stroke study for international collaborations.

  15. The family structure of the Mucorales: a synoptic revision based on comprehensive multigene-genealogies.

    Science.gov (United States)

    Hoffmann, K; Pawłowska, J; Walther, G; Wrzosek, M; de Hoog, G S; Benny, G L; Kirk, P M; Voigt, K

    2013-06-01

    The Mucorales (Mucoromycotina) are one of the most ancient groups of fungi comprising ubiquitous, mostly saprotrophic organisms. The first comprehensive molecular studies 11 yr ago revealed the traditional classification scheme, mainly based on morphology, as highly artificial. Since then only single clades have been investigated in detail but a robust classification of the higher levels based on DNA data has not been published yet. Therefore we provide a classification based on a phylogenetic analysis of four molecular markers including the large and the small subunit of the ribosomal DNA, the partial actin gene and the partial gene for the translation elongation factor 1-alpha. The dataset comprises 201 isolates in 103 species and represents about one half of the currently accepted species in this order. Previous family concepts are reviewed and the family structure inferred from the multilocus phylogeny is introduced and discussed. Main differences between the current classification and preceding concepts affects the existing families Lichtheimiaceae and Cunninghamellaceae, as well as the genera Backusella and Lentamyces which recently obtained the status of families along with the Rhizopodaceae comprising Rhizopus, Sporodiniella and Syzygites. Compensatory base change analyses in the Lichtheimiaceae confirmed the lower level classification of Lichtheimia and Rhizomucor while genera such as Circinella or Syncephalastrum completely lacked compensatory base changes.

  16. High-accuracy phase-field models for brittle fracture based on a new family of degradation functions

    Science.gov (United States)

    Sargado, Juan Michael; Keilegavlen, Eirik; Berre, Inga; Nordbotten, Jan Martin

    2018-02-01

    Phase-field approaches to fracture based on energy minimization principles have been rapidly gaining popularity in recent years, and are particularly well-suited for simulating crack initiation and growth in complex fracture networks. In the phase-field framework, the surface energy associated with crack formation is calculated by evaluating a functional defined in terms of a scalar order parameter and its gradients. These in turn describe the fractures in a diffuse sense following a prescribed regularization length scale. Imposing stationarity of the total energy leads to a coupled system of partial differential equations that enforce stress equilibrium and govern phase-field evolution. These equations are coupled through an energy degradation function that models the loss of stiffness in the bulk material as it undergoes damage. In the present work, we introduce a new parametric family of degradation functions aimed at increasing the accuracy of phase-field models in predicting critical loads associated with crack nucleation as well as the propagation of existing fractures. An additional goal is the preservation of linear elastic response in the bulk material prior to fracture. Through the analysis of several numerical examples, we demonstrate the superiority of the proposed family of functions to the classical quadratic degradation function that is used most often in the literature.

  17. [Information needs of physicians, professional carers and family carers for an evidence-based dementia website].

    Science.gov (United States)

    Komarahadi, Fely L; Ruf, Daniela; Hüll, Michael; Härter, Martin

    2012-01-01

    Despite the demographically driven rapid growth of the number of persons with dementia, in Germany a website is lacking that provides evidence based information about the disease, its burden and therapeutic options to family and professional carers as well as physicians. A website was developed with the objective to give free access to evidence based information concerning the disease and care for patients with dementia. In order to meet the expectations of the user groups an analysis of information needs was performed with 80 physicians, 163 professional carers and 104 family carers. All user groups rated information on symptoms, course and treatment of dementia and support for family carers as important topics. Group differences were found for the need to be informed on financial support, daily care and interaction with patients. The contents of the website will be accommodated to the specific needs of the user groups. © Georg Thieme Verlag KG Stuttgart · New York.

  18. Numerical analysis of the in-well vapor-stripping system demonstration at Edwards Air Force Base

    International Nuclear Information System (INIS)

    White, M.D.; Gilmore, T.J.

    1996-10-01

    Numerical simulations, with the Subsurface Transport Over Multiple Phases (STOMP) simulator, were applied to the field demonstration of an in-well vapor-stripping system at Edwards Air Force Base (AFB), near Mojave, California. The demonstration field site on the Edwards AFB was previously contaminated from traversing groundwater that was contained a varied composition of volatile organic compounds (VOCs), which primarily includes trichloroethylene (TCE). Contaminant TCE originated from surface basin that had been used to collect runoff during the cleaning of experimental rocket powered planes in the 1960s and 1970s. This report documents those simulations and associated numerical analyses. A companion report documents the in- well vapor-stripping demonstration from a field perspective

  19. Numerical Study on Alternating Current Breakdown Mechanism Between Sphere-Sphere Electrodes in Transformer Oil-Based Magnetic Nanofluids.

    Science.gov (United States)

    Lee, Won-Ho; Lee, Jong-Chul

    2018-09-01

    A numerical simulation was developed for magnetic nanoparticles in a liquid dielectric to investigate the AC breakdown voltage of the magnetic nanofluids according to the volume concentration of the magnetic nanoparticles. In prior research, we found that the dielectric breakdown voltage of the transformer oil-based magnetic nanofluids was positively or negatively affected according to the amount of magnetic nanoparticles under a testing condition of dielectric fluids, and the trajectory of the magnetic nanoparticles in a fabricated chip was visualized to verify the related phenomena via measurements and computations. In this study, a numerical simulation of magnetic nanoparticles in an insulating fluid was developed to model particle tracing for AC breakdown mechanisms happened to a sphere-sphere electrode configuration and to propose a possible mechanism regarding the change in the breakdown strength due to the behavior of the magnetic nanoparticles with different applied voltages.

  20. Numerical model of the nanoindentation test based on the digital material representation of the Ti/TiN multilayers

    Directory of Open Access Journals (Sweden)

    Perzyński Konrad

    2015-06-01

    Full Text Available The developed numerical model of a local nanoindentation test, based on the digital material representation (DMR concept, has been presented within the paper. First, an efficient algorithm describing the pulsed laser deposition (PLD process was proposed to realistically recreate the specific morphology of a nanolayered material in an explicit manner. The nanolayered Ti/TiN composite was selected for the investigation. Details of the developed cellular automata model of the PLD process were presented and discussed. Then, the Ti/TiN DMR was incorporated into the finite element software and numerical model of the nanoindentation test was established. Finally, examples of obtained results presenting capabilities of the proposed approach were highlighted.

  1. [Hardware Implementation of Numerical Simulation Function of Hodgkin-Huxley Model Neurons Action Potential Based on Field Programmable Gate Array].

    Science.gov (United States)

    Wang, Jinlong; Lu, Mai; Hu, Yanwen; Chen, Xiaoqiang; Pan, Qiangqiang

    2015-12-01

    Neuron is the basic unit of the biological neural system. The Hodgkin-Huxley (HH) model is one of the most realistic neuron models on the electrophysiological characteristic description of neuron. Hardware implementation of neuron could provide new research ideas to clinical treatment of spinal cord injury, bionics and artificial intelligence. Based on the HH model neuron and the DSP Builder technology, in the present study, a single HH model neuron hardware implementation was completed in Field Programmable Gate Array (FPGA). The neuron implemented in FPGA was stimulated by different types of current, the action potential response characteristics were analyzed, and the correlation coefficient between numerical simulation result and hardware implementation result were calculated. The results showed that neuronal action potential response of FPGA was highly consistent with numerical simulation result. This work lays the foundation for hardware implementation of neural network.

  2. Numerical Simulation of a Novel Sensing Approach Based on Abnormal Blocking by Periodic Grating Strips near the Silicon Wire Waveguide

    Directory of Open Access Journals (Sweden)

    Andrei Tsarev

    2018-05-01

    Full Text Available This paper discusses the physical nature and the numerical modeling of a novel approach of periodic structures for applications as photonic sensors. The sensing is based on the high sensitivity to the cover index change of the notch wavelength. This sensitivity is due to the effect of abnormal blocking of the guided wave propagating along the silicon wire with periodic strips overhead it through the silica buffer. The structure sensing is numerically modeled by 2D and 3D finite difference time domain (FDTD method, taking into account the waveguide dispersion. The modeling of the long structures (more than 1000 strips is accomplished by the 2D method of lines (MoL with a maximal implementation of the analytical feature of the method. It is proved that the effect of abnormal blocking could be used for the construction of novel types of optical sensors.

  3. Evidence-based behavioral interventions to promote diabetes management in children, adolescents, and families.

    Science.gov (United States)

    Hilliard, Marisa E; Powell, Priscilla W; Anderson, Barbara J

    2016-10-01

    As members of multidisciplinary diabetes care teams, psychologists are well-suited to support self-management among youth with Type 1 diabetes (T1D) and Type 2 diabetes (T2D) and their families. Psychological and behavioral interventions can promote adherence to the complex and demanding diabetes care regimen, with the goals of promoting high quality of life, achieving optimal glycemic control, and ultimately preventing disease-related complications. This article reviews well-researched contemporary behavioral interventions to promote optimal diabetes family- and self-management and health outcomes in youth with T1D, in the context of key behavioral theories. The article summarizes the evidence base for established diabetes skills training programs, family interventions, and multisystemic interventions, and introduces emerging evidence for technology and mobile health interventions and health care delivery system interventions. Next steps in behavioral T1D intervention research include tailoring interventions to meet individuals' and families' unique needs and strengths, and systematically evaluating cost-effectiveness to advocate for dissemination of well-developed interventions. Although in its infancy, this article reviews observational and intervention research for youth with T2D and their families and discusses lessons for future research with this population. Interventions for youth with T2D will need to incorporate family members, consider cultural and family issues related to health behaviors, and take into account competing priorities for resources. As psychologists and behavioral scientists, we must advocate for the integration of behavioral health into routine pediatric diabetes care in order to effectively promote meaningful change in the behavioral and medical well-being of youth and families living with T1D and T2D. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  4. Numerical discretization-based estimation methods for ordinary differential equation models via penalized spline smoothing with applications in biomedical research.

    Science.gov (United States)

    Wu, Hulin; Xue, Hongqi; Kumar, Arun

    2012-06-01

    Differential equations are extensively used for modeling dynamics of physical processes in many scientific fields such as engineering, physics, and biomedical sciences. Parameter estimation of differential equation models is a challenging problem because of high computational cost and high-dimensional parameter space. In this article, we propose a novel class of methods for estimating parameters in ordinary differential equation (ODE) models, which is motivated by HIV dynamics modeling. The new methods exploit the form of numerical discretization algorithms for an ODE solver to formulate estimating equations. First, a penalized-spline approach is employed to estimate the state variables and the estimated state variables are then plugged in a discretization formula of an ODE solver to obtain the ODE parameter estimates via a regression approach. We consider three different order of discretization methods, Euler's method, trapezoidal rule, and Runge-Kutta method. A higher-order numerical algorithm reduces numerical error in the approximation of the derivative, which produces a more accurate estimate, but its computational cost is higher. To balance the computational cost and estimation accuracy, we demonstrate, via simulation studies, that the trapezoidal discretization-based estimate is the best and is recommended for practical use. The asymptotic properties for the proposed numerical discretization-based estimators are established. Comparisons between the proposed methods and existing methods show a clear benefit of the proposed methods in regards to the trade-off between computational cost and estimation accuracy. We apply the proposed methods t an HIV study to further illustrate the usefulness of the proposed approaches. © 2012, The International Biometric Society.

  5. The Role of Family in Family Firms

    OpenAIRE

    Marianne Bertrand; Antoinette Schoar

    2006-01-01

    History is replete with examples of spectacular ascents of family businesses. Yet there are also numerous accounts of family businesses brought down by bitter feuds among family members, disappointed expectations between generations, and tragic sagas of later generations unable to manage their wealth. A large fraction of businesses throughout the world are organized around families. Why are family firms so prevalent? What are the implications of family control for the governance, financing an...

  6. Pilot Trial of an Electronic Family Medical History in US Faith-Based Communities.

    Science.gov (United States)

    Newcomb, Patricia; Canclini, Sharon; Cauble, Denise; Raudonis, Barbara; Golden, Paulette

    2014-07-01

    In spite of the acknowledged importance of collecting family health information, methods of collecting, organizing, and storage of pedigree data are not uniformly utilized in practice, though several electronic tools have been developed for the purpose. Using electronic tools to gather health information may empower individuals to take responsibility in managing their family health history. The purpose of this study was to describe the feasibility and outcomes of introducing small groups to the My Family Health Portrait tool in faith-based communities using faith community nurses (FCNs). This pilot project adopted a mixed methods approach to assess the potential of an educational intervention delivered by FCNs for increasing the use of electronic technologies for organizing and storing family health histories among the general public. Treatment and control groups were recruited from four faith-based communities in north Texas using a parallel-groups quasi-experimental design. Qualitative data were gleaned from field notes made by investigators interacting with FCNs and observing their teaching. A majority of respondents believed that knowing one's health history and passing it on to family and medical personnel is important. Those receiving face-to-face instruction on the electronic tool were significantly more likely to have written down family health information than the control group who received only an informational handout (χ(2) = 5.96, P = .015). Barriers to teaching about and using the electronic tool included FCNs' lack of facility with computers in the educational context and FCN and respondent mistrust of electronic storage for family health information. © The Author(s) 2014.

  7. Community Alternatives for Love and Limits (CALL: A community-based family strengthening multi-family intervention program to respond to adolescents at risk

    Directory of Open Access Journals (Sweden)

    David Wilkerson

    2005-12-01

    Full Text Available Family strengthening has become a source of growing interest, research, and program design in the fields of prevention and treatment for problems of youth delinquency, school failure, alcohol, tobacco and other drug abuse (ATOD. Despite many studies that illustrate the positive outcomes of family strengthening programs and family-focused interventions, their use in communities has not advanced commensurate with their promise. This article offers a rationale for why programming efforts should continue to be directed towards family strengthening efforts as opposed to youth-focused only interventions. In addition, a community-based, family-strengthening alternative is described that addresses issues of youth delinquency while reducing barriers associated with availability, accessibility, and cost.

  8. Numerical simulation of groundwater flow at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington

    Science.gov (United States)

    Jones, Joseph L.; Johnson, Kenneth H.; Frans, Lonna M.

    2016-08-18

    Information about groundwater-flow paths and locations where groundwater discharges at and near Puget Sound Naval Shipyard is necessary for understanding the potential migration of subsurface contaminants by groundwater at the shipyard. The design of some remediation alternatives would be aided by knowledge of whether groundwater flowing at specific locations beneath the shipyard will eventually discharge directly to Sinclair Inlet of Puget Sound, or if it will discharge to the drainage system of one of the six dry docks located in the shipyard. A 1997 numerical (finite difference) groundwater-flow model of the shipyard and surrounding area was constructed to help evaluate the potential for groundwater discharge to Puget Sound. That steady-state, multilayer numerical model with homogeneous hydraulic characteristics indicated that groundwater flowing beneath nearly all of the shipyard discharges to the dry-dock drainage systems, and only shallow groundwater flowing beneath the western end of the shipyard discharges directly to Sinclair Inlet.Updated information from a 2016 regional groundwater-flow model constructed for the greater Kitsap Peninsula was used to update the 1997 groundwater model of the Puget Sound Naval Shipyard. That information included a new interpretation of the hydrogeologic units underlying the area, as well as improved recharge estimates. Other updates to the 1997 model included finer discretization of the finite-difference model grid into more layers, rows, and columns, all with reduced dimensions. This updated Puget Sound Naval Shipyard model was calibrated to 2001–2005 measured water levels, and hydraulic characteristics of the model layers representing different hydrogeologic units were estimated with the aid of state-of-the-art parameter optimization techniques.The flow directions and discharge locations predicted by this updated model generally match the 1997 model despite refinements and other changes. In the updated model, most

  9. Strain Localization and Weakening Processes in Viscously Deforming Rocks: Numerical Modeling Based on Laboratory Torsion Experiments

    Science.gov (United States)

    Doehmann, M.; Brune, S.; Nardini, L.; Rybacki, E.; Dresen, G.

    2017-12-01

    Strain localization is an ubiquitous process in earth materials observed over a broad range of scales in space and time. Localized deformation and the formation of shear zones and faults typically involves material softening by various processes, like shear heating and grain size reduction. Numerical modeling enables us to study the complex physical and chemical weakening processes by separating the effect of individual parameters and boundary conditions. Using simple piece-wise linear functions for the parametrization of weakening processes allows studying a system at a chosen (lower) level of complexity (e.g. Cyprych et al., 2016). In this study, we utilize a finite element model to test two weakening laws that reduce the strength of the material depending on either the I) amount of accumulated strain or II) deformational work. Our 2D Cartesian models are benchmarked to single inclusion torsion experiments performed at elevated temperatures of 900 °C and pressures of up to 400 MPa (Rybacki et al., 2014). The experiments were performed on Carrara marble samples containing a weak Solnhofen limestone inclusion at a maximum strain rate of 2.0*10-4 s-1. Our models are designed to reproduce shear deformation of a hollow cylinder equivalent to the laboratory setup, such that material leaving one side of the model in shear direction enters again on the opposite side using periodic boundary conditions. Similar to the laboratory tests, we applied constant strain rate and constant stress boundary conditions.We use our model to investigate the time-dependent distribution of stress and strain and the effect of different parameters. For instance, inclusion rotation is shown to be strongly dependent on the viscosity ratio between matrix and inclusion and stronger ductile weakening increases the localization rate while decreasing shear zone width. The most suitable weakening law for representation of ductile rock is determined by combining the results of parameter tests with

  10. Intracortical stiffness of mid-diaphysis femur bovine bone: lacunar-canalicular based homogenization numerical solutions and microhardness measurements.

    Science.gov (United States)

    Hage, Ilige S; Hamade, Ramsey F

    2017-09-01

    Microscale lacunar-canalicular (L-C) porosity is a major contributor to intracortical bone stiffness variability. In this work, such variability is investigated experimentally using micro hardness indentation tests and numerically using a homogenization scheme. Cross sectional rings of cortical bones are cut from the middle tubular part of bovine femur long bone at mid-diaphysis. A series of light microscopy images are taken along a line emanating from the cross-section center starting from the ring's interior (endosteum) ring surface toward the ring's exterior (periosteum) ring surface. For each image in the line, computer vision analysis of porosity is conducted employing an image segmentation methodology based on pulse coupled neural networks (PCNN) recently developed by the authors. Determined are size and shape of each of the lacunar-canalicular (L-C) cortical micro constituents: lacunae, canaliculi, and Haversian canals. Consequently, it was possible to segment and quantify the geometrical attributes of all individual segmented pores leading to accurate determination of derived geometrical measures such as L-C cortical pores' total porosity (pore volume fraction), (elliptical) aspect ratio, orientation, location, and number of pores in secondary and primary osteons. Porosity was found to be unevenly (but linearly) distributed along the interior and exterior regions of the intracortical bone. The segmented L-C porosity data is passed to a numerical microscale-based homogenization scheme, also recently developed by the authors, that analyses a composite made up of lamella matrix punctuated by multi-inclusions and returns corresponding values for longitudinal and transverse Young's modulus (matrix stiffness) for these micro-sized spatial locations. Hence, intracortical stiffness variability is numerically quantified using a combination of computer vision program and numerical homogenization code. These numerically found stiffness values of the homogenization

  11. Numerical analysis of bifurcations

    International Nuclear Information System (INIS)

    Guckenheimer, J.

    1996-01-01

    This paper is a brief survey of numerical methods for computing bifurcations of generic families of dynamical systems. Emphasis is placed upon algorithms that reflect the structure of the underlying mathematical theory while retaining numerical efficiency. Significant improvements in the computational analysis of dynamical systems are to be expected from more reliance of geometric insight coming from dynamical systems theory. copyright 1996 American Institute of Physics

  12. Dutch home-based pre-reading intervention with children at familial risk of dyslexia

    NARCIS (Netherlands)

    van Otterloo, S.G.; van der Leij, A.

    2009-01-01

    Children (5 and 6 years old, n = 30) at familial risk of dyslexia received a home-based intervention that focused on phoneme awareness and letter knowledge in the year prior to formal reading instruction. The children were compared to a no-training at-risk control group (n = 27), which was selected

  13. Early home-based intervention in the Netherlands for children at familial risk of dyslexia

    NARCIS (Netherlands)

    van Otterloo, S.G.; van der Leij, A.; Henrichs, L.F.

    2009-01-01

    Dutch children at higher familial risk of reading disability received a home-based intervention programme before formal reading instruction started to investigate whether this would reduce the risk of dyslexia. The experimental group (n=23) received a specific training in phoneme awareness and

  14. Dutch Home-Based Pre-Reading Intervention with Children at Familial Risk of Dyslexia

    Science.gov (United States)

    van Otterloo, Sandra G.; van der Leij, Aryan

    2009-01-01

    Children (5 and 6 years old, n = 30) at familial risk of dyslexia received a home-based intervention that focused on phoneme awareness and letter knowledge in the year prior to formal reading instruction. The children were compared to a no-training at-risk control group (n = 27), which was selected a year earlier. After training, we found a small…

  15. Early Home-Based Intervention in the Netherlands for Children at Familial Risk of Dyslexia

    Science.gov (United States)

    van Otterloo, Sandra G.; van der Leij, Aryan; Henrichs, Lotte F.

    2009-01-01

    Dutch children at higher familial risk of reading disability received a home-based intervention programme before formal reading instruction started to investigate whether this would reduce the risk of dyslexia. The experimental group (n = 23) received a specific training in phoneme awareness and letter knowledge. A control group (n = 25) received…

  16. A rate-compatible family of protograph-based LDPC codes built by expurgation and lengthening

    Science.gov (United States)

    Dolinar, Sam

    2005-01-01

    We construct a protograph-based rate-compatible family of low-density parity-check codes that cover a very wide range of rates from 1/2 to 16/17, perform within about 0.5 dB of their capacity limits for all rates, and can be decoded conveniently and efficiently with a common hardware implementation.

  17. Transdiagnostic Theory and Application of Family-Based Treatment for Youth with Eating Disorders

    Science.gov (United States)

    Loeb, Katharine L.; Lock, James; Greif, Rebecca; le Grange, Daniel

    2012-01-01

    This paper describes the transdiagnostic theory and application of family-based treatment (FBT) for children and adolescents with eating disorders. We review the fundamentals of FBT, a transdiagnostic theoretical model of FBT and the literature supporting its clinical application, adaptations across developmental stages and the diagnostic spectrum…

  18. Assessment-Based Intervention for Severe Behavior Problems in a Natural Family Context.

    Science.gov (United States)

    Vaughn, Bobbie J.; Clarke, Shelley; Dunlap, Glen

    1997-01-01

    Functional assessments and assessment-based interventions were conducted with an 8-year-old boy with disabilities and severe problem behavior in the context of two family routines: using the home bathroom and dining in a fast-food restaurant. A multiple baseline design demonstrated the effectiveness of the intervention package as implemented by…

  19. Center-Based Early Head Start and Children Exposed to Family Conflict

    Science.gov (United States)

    Whiteside-Mansell, Leanne; Bradley, Robert; McKelvey, Lorraine; Lopez, Maya

    2009-01-01

    Research Findings: Family conflict is known to be associated with poor development for young children, but many children appear resilient. This study examined the extent to which high-quality center care during early childhood protects children from these negative consequences. Children participating in center-based sites of the Early Head Start…

  20. Manualized Family-Based Treatment for Anorexia Nervosa: A Case Series.

    Science.gov (United States)

    Le Grange, Daniel; Binford, Roslyn; Loeb, Katharine L.

    2005-01-01

    Objective: The purpose of this study was to describe a case series of children and adolescents (mean age = 14.5 years, SD = 2.3; range 9-18) with anorexia nervosa who received manualized family-based treatment for their eating disorder. Method: Forty-five patients with anorexia nervosa were compared pre- and post-treatment on weight and menstrual…

  1. A comparison of etched-geometry and overgrown silicon permeable base transistors by two-dimensional numerical simulations

    Science.gov (United States)

    Vojak, B. A.; Alley, G. D.

    1983-08-01

    Two-dimensional numerical simulations are used to compare etched geometry and overgrown Si permeable base transistors (PTBs), considering both the etched collector and etched emitter biasing conditions made possible by the asymmetry of the etched structure. In PTB devices, the two-dimensional nature of the depletion region near the Schottky contact base grating results in a smaller electron barrier and, therefore, a larger collector current in the etched than in the overgrown structure. The parasitic feedback effects which result at high base-to-emitter bias levels lead to a deviation from the square-law behavior found in the collector characteristics of the overgrown PBT. These structures also have lower device capacitances and smaller transconductances at high base-to-emitter voltages. As a result, overgrown and etched structures have comparable predicted maximum values of the small signal unity short-circuit current gain frequency and maximum oscillation frequency.

  2. Numerically Based Phase Transformation Maps for Dissimilar Aluminum Alloys Joined by Friction Stir-Welding

    Directory of Open Access Journals (Sweden)

    Carter Hamilton

    2018-05-01

    Full Text Available Sheets of aluminum 2017A-T451 and 7075-T651 were friction stir-welded in a butt-weld configuration. An existing computational model of the welding process for temperature distribution and material flow was adapted to estimate the phase transformations that occur across the weld zone. Near the weld center, process temperatures are sufficient to fully dissolve the equilibrium η phase in 7075 and partially dissolve the equilibrium S phase in 2017A. Upon cooling, Guinier–Preston (GP and Guinier–Preston–Bagaryatsky (GPB zones re-precipitate, and hardness recovers. Due to the more complete dissolution of the equilibrium phase in 7075, the hardness recovery skews toward whichever side of the weld, i.e., the advancing or retreating side, represents the 7075 workpiece. Phase transformation maps generated by the numerical simulation align not only with the hardness profiles taken across the weld zone, but also with positron lifetimes obtained through positron annihilation lifetime spectroscopy (PALS. Boundaries between the aluminum matrix and the secondary phases provide open volumes to trap positrons; therefore, positron lifetimes across the weld correspond with the phase transformations that occur in 7075 and 2017A during processing.

  3. An accurate real-time model of maglev planar motor based on compound Simpson numerical integration

    Directory of Open Access Journals (Sweden)

    Baoquan Kou

    2017-05-01

    Full Text Available To realize the high-speed and precise control of the maglev planar motor, a more accurate real-time electromagnetic model, which considers the influence of the coil corners, is proposed in this paper. Three coordinate systems for the stator, mover and corner coil are established. The coil is divided into two segments, the straight coil segment and the corner coil segment, in order to obtain a complete electromagnetic model. When only take the first harmonic of the flux density distribution of a Halbach magnet array into account, the integration method can be carried out towards the two segments according to Lorenz force law. The force and torque analysis formula of the straight coil segment can be derived directly from Newton-Leibniz formula, however, this is not applicable to the corner coil segment. Therefore, Compound Simpson numerical integration method is proposed in this paper to solve the corner segment. With the validation of simulation and experiment, the proposed model has high accuracy and can realize practical application easily.

  4. Numerical simulation of the vertical migration of Microcystis (cyanobacteria colonies based on turbulence drag

    Directory of Open Access Journals (Sweden)

    Hongru Zhao

    2016-11-01

    Full Text Available The vertical migration and accumulation of Microcystis is an important process in water blooms, and colony migration is influenced by colony size and wind-wave disturbance. The vertical migration of Microcystis colonies in turbulence can be simulated in a numerical model. In this study, we model such migration by coupling the colony size and hydrodynamics, including the gravity, colony buoyancy, and the viscous drag force of turbulence. The turbulence intensity was represented by the turbulent kinetic energy (KZ; the larger the KZ, the stronger the wind-wave disturbance. The simulated vertical distribution of Microcystis well agreed with the measured values in a laboratory experiment indicating that our model can simulate the vertical distribution of Microcystis under different hydrodynamic conditions. We also found a size-dependent critical turbulent kinetic energy (TKZ, such that if the turbulent kinetic energy of water exceeds the critical value (i.e., KZ > TKZ, the colonies sink under the drag forces of turbulence; conversely, if KZ < TKZ, the colonies can overcome the turbulent mixing and float. The TKZ of each colony was linearly related to colony diameter. The model is crucial for prediction and prevention of water blooms. The simulated threshold turbulent kinetic energy, at which water blooms disappear in Lake Taihu (a large freshwater lake in the Yangtze Delta, Jiangsu Province, China, was 55.5 cm2 s−2. 

  5. Image-based numerical simulation of the local cyclic deformation behavior around cast pore in steel

    Energy Technology Data Exchange (ETDEWEB)

    Qian, Lihe, E-mail: dlhqian@yahoo.com [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University (China); National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University (China); Cui, Xiaona; Liu, Shuai [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University (China); National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University (China); Chen, Minan [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University (China); Ma, Penghui [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University (China); National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University (China); Xie, Honglan [Shanghai Synchrotron Radiation Facility, Shanghai Institute of Applied Physics (China); Zhang, Fucheng [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University (China); National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University (China); Meng, Jiangying [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University (China)

    2016-12-15

    The local cyclic stress/strain responses around an actual, irregular pore in cast Hadfield steel under fatigue loading are investigated numerically, and compared with those around a spherical and an ellipsoidal pore. The actual pore-containing model takes into account the real shape of the pore imaged via high-resolution synchrotron X-ray computed tomography and combines both isotropic hardening and Bauschinger effects by using the Chaboche's material model, which enables to realistically simulate the cyclic deformation behaviors around actual pore. The results show that the stress and strain energy density concentration factors (K{sub σ} and K{sub E}) around either an actual irregular pore or an idealized pore increase while the strain concentration factor (K{sub ε}) decreases slightly with increasing the number of fatigue cycles. However, all the three parameters, K{sub σ}, K{sub ε} and K{sub E}, around an actual pore are always several times larger than those around an idealized pore, whatever the number of fatigue cycles. It is suggested that the fatigue properties of cast pore-containing materials cannot be realistically evaluated with any idealized pore models. The feasibility of the methodology presented highlights the potential of its application in the micromechanical understanding of fatigue damage phenomena in cast pore-containing materials.

  6. An accurate real-time model of maglev planar motor based on compound Simpson numerical integration

    Science.gov (United States)

    Kou, Baoquan; Xing, Feng; Zhang, Lu; Zhou, Yiheng; Liu, Jiaqi

    2017-05-01

    To realize the high-speed and precise control of the maglev planar motor, a more accurate real-time electromagnetic model, which considers the influence of the coil corners, is proposed in this paper. Three coordinate systems for the stator, mover and corner coil are established. The coil is divided into two segments, the straight coil segment and the corner coil segment, in order to obtain a complete electromagnetic model. When only take the first harmonic of the flux density distribution of a Halbach magnet array into account, the integration method can be carried out towards the two segments according to Lorenz force law. The force and torque analysis formula of the straight coil segment can be derived directly from Newton-Leibniz formula, however, this is not applicable to the corner coil segment. Therefore, Compound Simpson numerical integration method is proposed in this paper to solve the corner segment. With the validation of simulation and experiment, the proposed model has high accuracy and can realize practical application easily.

  7. Numerical simulation of shower cooling tower based on artificial neural network

    International Nuclear Information System (INIS)

    Qi Xiaoni; Liu Zhenyan; Li Dandan

    2008-01-01

    This study was prompted by the need to design towers for applications in which, due to salt deposition on the packing and subsequent blockage, the use of tower packing is not practical. The cooling tower analyzed in this study is void of fill, named shower cooling tower (SCT). However, the present study focuses mostly on experimental investigation of the SCT, and no systematic numerical method is available. In this paper, we first developed a one dimensional model and analyzed the heat and mass transfer processes of the SCT; then we used the concept of artificial neural network (ANN) to propose a computer design tool that can help the designer evaluate the outlet water temperature from a given set of experimentally obtained data. For comparison purposes and accurate evaluation of the predictions, part of the experimental data was used to train the neural network and the remainder to test the model. The results predicted by the ANN model were compared with those of the standard model and the experimental data. The ANN model predicted the outlet water temperature with a MAE (mean absolute error) of 1.31%, whereas the standard one dimensional model showed a MAE of 9.42%

  8. Dry calibration of electromagnetic flowmeters based on numerical models combining multiple physical phenomena (multiphysics)

    Science.gov (United States)

    Fu, X.; Hu, L.; Lee, K. M.; Zou, J.; Ruan, X. D.; Yang, H. Y.

    2010-10-01

    This paper presents a method for dry calibration of an electromagnetic flowmeter (EMF). This method, which determines the voltage induced in the EMF as conductive liquid flows through a magnetic field, numerically solves a coupled set of multiphysical equations with measured boundary conditions for the magnetic, electric, and flow fields in the measuring pipe of the flowmeter. Specifically, this paper details the formulation of dry calibration and an efficient algorithm (that adaptively minimizes the number of measurements and requires only the normal component of the magnetic flux density as boundary conditions on the pipe surface to reconstruct the magnetic field involved) for computing the sensitivity of EMF. Along with an in-depth discussion on factors that could significantly affect the final precision of a dry calibrated EMF, the effects of flow disturbance on measuring errors have been experimentally studied by installing a baffle at the inflow port of the EMF. Results of the dry calibration on an actual EMF were compared against flow-rig calibration; excellent agreements (within 0.3%) between dry calibration and flow-rig tests verify the multiphysical computation of the fields and the robustness of the method. As requiring no actual flow, the dry calibration is particularly useful for calibrating large-diameter EMFs where conventional flow-rig methods are often costly and difficult to implement.

  9. Numerical Study of Tire Hydroplaning Based on Power Spectrum of Asphalt Pavement and Kinetic Friction Coefficient

    Directory of Open Access Journals (Sweden)

    Shengze Zhu

    2017-01-01

    Full Text Available Hydroplaning is a driving phenomenon threating vehicle’s control stability and safety. It happens when tire rolls on wet pavement with high speed that hydrodynamic force uplifts the tire. Accurate numerical simulation to reveal the mechanism of hydroplaning and evaluate the function of relevant factors in this process is significant. In order to describe the friction behaviors of tire-pavement interaction, kinetic friction coefficient curve of tire rubber and asphalt pavement was obtained by combining pavement surface power spectrum and complex modulus of tread rubber through Persson’s friction theory. Finite element model of tire-fluid-pavement was established in ABAQUS, which was composed of a 225-40-R18 radial tire and three types of asphalt pavement covered with water film. Mechanical responses and physical behaviors of tire-pavement interaction were observed and compared with NASA equation to validate the applicability and accuracy of this model. Then contact force at tire-pavement interface and critical hydroplaning speed influenced by tire inflation pressure, water film thickness, and pavement types were investigated. The results show higher tire inflation pressure, thinner water film, and more abundant macrotexture enhancing hydroplaning speed. The results could be applied to predict hydroplaning speed on different asphalt pavement and improve pavement skid resistance design.

  10. Numerical analysis of radiation propagation in innovative volumetric receivers based on selective laser melting techniques

    Science.gov (United States)

    Alberti, Fabrizio; Santiago, Sergio; Roccabruna, Mattia; Luque, Salvador; Gonzalez-Aguilar, Jose; Crema, Luigi; Romero, Manuel

    2016-05-01

    Volumetric absorbers constitute one of the key elements in order to achieve high thermal conversion efficiencies in concentrating solar power plants. Regardless of the working fluid or thermodynamic cycle employed, design trends towards higher absorber output temperatures are widespread, which lead to the general need of components of high solar absorptance, high conduction within the receiver material, high internal convection, low radiative and convective heat losses and high mechanical durability. In this context, the use of advanced manufacturing techniques, such as selective laser melting, has allowed for the fabrication of intricate geometries that are capable of fulfilling the previous requirements. This paper presents a parametric design and analysis of the optical performance of volumetric absorbers of variable porosity conducted by means of detailed numerical ray tracing simulations. Sections of variable macroscopic porosity along the absorber depth were constructed by the fractal growth of single-cell structures. Measures of performance analyzed include optical reflection losses from the absorber front and rear faces, penetration of radiation inside the absorber volume, and radiation absorption as a function of absorber depth. The effects of engineering design parameters such as absorber length and wall thickness, material reflectance and porosity distribution on the optical performance of absorbers are discussed, and general design guidelines are given.

  11. Examination of a board game approach to children's involvement in family-based weight management vs. traditional family-based behavioral counseling in primary care.

    Science.gov (United States)

    Sen, Merve; Uzuner, Arzu; Akman, Mehmet; Bahadir, Aliye Tugba; Borekci, Nazire Oncul; Viggiano, Emanuela

    2018-05-29

    The most effective intervention model for childhood obesity is known as family-based behavioral group treatments. There are also studies that investigate the effects of educational games for children to gain healthy eating and physical exercise habits. The aim of this study was to compare the efficacy of a family-based group treatment with an educational game (Kaledo) intervention in childhood obesity. Kaledo is a board game that was designed to improve nutritional knowledge and healthy life style habits. It is played with nutrition and activity cards that players can select from, and a total score is calculated in the end of the game according to energy intake and expenditure. Obese children between 9 and 12 ages were involved in this study. Participants randomly divided into behavioral and game intervention groups. Clinical evaluation was performed in the first and second counseling in both groups. Marmara University Family Medicine Department Obese Children and Adolescents Interview Form, Physical Activity Evaluation Form, and Three-day Food Record Form were used for this purpose. Strengths and Difficulties Questionnaire-Parent Report Version and Children's Depression Inventory were used for the assessment of psychiatric symptoms. After the clinical evaluation, an education session about healthy eating and physical activity was attended by both groups. After that, for the behavioral groups, parents and children were assigned to different groups, while for the game intervention group, parents were assigned to behavioral sessions and children were assigned to game (Kaledo) sessions. A total of six sessions with 1-h duration and 2-week interval were performed in both groups. Height and weight were measured in each session and analysis was performed on the data of the children who participated in all of the sessions. Although a total of 108 children were clinically evaluated, 52 children and their parents, 26 in the behavioral group and 26 in the game intervention

  12. Derivation Method for the Foundation Boundaries of Hydraulic Numerical Simulation Models Based on the Elastic Boussinesq Solution

    Directory of Open Access Journals (Sweden)

    Jintao Song

    2015-01-01

    Full Text Available The foundation boundaries of numerical simulation models of hydraulic structures dominated by a vertical load are investigated. The method used is based on the stress formula for fundamental solutions to semi-infinite space body elastic mechanics under a vertical concentrated force. The limit method is introduced into the original formula, which is then partitioned and analyzed according to the direction of the depth extension of the foundation. The point load will be changed to a linear load with a length of 2a. Inverse proportion function assumptions are proposed at parameter a and depth l of the calculation points to solve the singularity questions of elastic stress in a semi-infinite space near the ground. Compared with the original formula, changing the point load to a linear load with a length of 2a is more reasonable. Finally, the boundary depth criterion of a hydraulic numerical simulation model is derived and applied to determine the depth boundary formula for gravity dam numerical simulations.

  13. Vegetation structure of plantain-based agrosystems determines numerical dominance in community of ground-dwelling ants.

    Science.gov (United States)

    Dassou, Anicet Gbéblonoudo; Tixier, Philippe; Dépigny, Sylvain; Carval, Dominique

    2017-01-01

    In tropics, ants can represent an important part of animal biomass and are known to be involved in ecosystem services, such as pest regulation. Understanding the mechanisms underlying the structuring of local ant communities is therefore important in agroecology. In the humid tropics of Africa, plantains are cropped in association with many other annual and perennial crops. Such agrosystems differ greatly in vegetation diversity and structure and are well-suited for studying how habitat-related factors affect the ant community. We analysed abundance data for the six numerically dominant ant taxa in 500 subplots located in 20 diversified, plantain-based fields. We found that the density of crops with foliage at intermediate and high canopy strata determined the numerical dominance of species. We found no relationship between the numerical dominance of each ant taxon with the crop diversity. Our results indicate that the manipulation of the densities of crops with leaves in the intermediate and high strata may help maintain the coexistence of ant species by providing different habitat patches. Further research in such agrosystems should be performed to assess if the effect of vegetation structure on ant abundance could result in efficient pest regulation.

  14. A fast quadrature-based numerical method for the continuous spectrum biphasic poroviscoelastic model of articular cartilage.

    Science.gov (United States)

    Stuebner, Michael; Haider, Mansoor A

    2010-06-18

    A new and efficient method for numerical solution of the continuous spectrum biphasic poroviscoelastic (BPVE) model of articular cartilage is presented. Development of the method is based on a composite Gauss-Legendre quadrature approximation of the continuous spectrum relaxation function that leads to an exponential series representation. The separability property of the exponential terms in the series is exploited to develop a numerical scheme that can be reduced to an update rule requiring retention of the strain history at only the previous time step. The cost of the resulting temporal discretization scheme is O(N) for N time steps. Application and calibration of the method is illustrated in the context of a finite difference solution of the one-dimensional confined compression BPVE stress-relaxation problem. Accuracy of the numerical method is demonstrated by comparison to a theoretical Laplace transform solution for a range of viscoelastic relaxation times that are representative of articular cartilage. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  15. Cross-shore profile and coastline changes of a sandy beach in Pieria, Greece, based on measurements and numerical simulation

    Directory of Open Access Journals (Sweden)

    A.M. PROSPATHOPOULOS

    2004-06-01

    Full Text Available In the present work, the changes of cross-shore profile and the coastline of a sandy beach in Pieria, Greece, are studied by using topographic profiles, sediment analysis and a numerical simulation model. The work is motivated by the considerable erosion problems caused to an extended portion of the coast north of the studied area due to the construction of a craft shelter, and its scope is two-fold: to help in understanding the dynamics of the beach based on results of the field work and to proceed a step further, studying the responses of this beach by numerical simulation, utilizing the topographic and sediment field data and measured wave data. The study of the cross-shore profiles, as well as the sediment analysis of the samples obtained along the profiles, revealed the morphological features of the coast under study and provided information concerning the dynamic zones in each profile. The sediment grain size reduces from south to north, following the direction of the longshore currents generated in the area. The results of the numerical simulation concerning the coastline evolution are found to be in agreement with the qualitative estimations and visual observations of existing coastal changes to the broader area.

  16. Family based association analysis of the IL2 and IL15 genes in allergic disorders

    DEFF Research Database (Denmark)

    Christensen, Ulla; Haagerup, Annette; Binderup, Helle

    2006-01-01

    ) identified in a family based association study of two Danish samples comprising a total of 235 families with allergic diseases. None of the IL15 SNPs showed significant association and the haplotype analysis yielded inconsistent results in the two samples. In contrast, the two IL2 SNPs showed association...... both separately and in haplotypes with several atopic phenotypes, most significantly with IgE-mediated allergy. (single SNP P-value 0.0005 for positive skin prick test, haplotype P-value 0.019 for positive RAST test). To our knowledge, this is the first study reporting association between IL2 and Ig...

  17. Decoherence and Noise in Spin-based Solid State Quantum Computers. Approximation-Free Numerical Simulations

    National Research Council Canada - National Science Library

    Harmon, Bruce N; Dobrovitski, Viatcheslav V

    2007-01-01

    ...) have also been developed and applied. Most recently, specific strategies for quantum control have been investigated for realistic systems in order to extend the coherence times for spin-based quantum computing implementations...

  18. Helicopter time-domain electromagnetic numerical simulation based on Leapfrog ADI-FDTD

    Science.gov (United States)

    Guan, S.; Ji, Y.; Li, D.; Wu, Y.; Wang, A.

    2017-12-01

    We present a three-dimension (3D) Alternative Direction Implicit Finite-Difference Time-Domain (Leapfrog ADI-FDTD) method for the simulation of helicopter time-domain electromagnetic (HTEM) detection. This method is different from the traditional explicit FDTD, or ADI-FDTD. Comparing with the explicit FDTD, leapfrog ADI-FDTD algorithm is no longer limited by Courant-Friedrichs-Lewy(CFL) condition. Thus, the time step is longer. Comparing with the ADI-FDTD, we reduce the equations from 12 to 6 and .the Leapfrog ADI-FDTD method will be easier for the general simulation. First, we determine initial conditions which are adopted from the existing method presented by Wang and Tripp(1993). Second, we derive Maxwell equation using a new finite difference equation by Leapfrog ADI-FDTD method. The purpose is to eliminate sub-time step and retain unconditional stability characteristics. Third, we add the convolution perfectly matched layer (CPML) absorbing boundary condition into the leapfrog ADI-FDTD simulation and study the absorbing effect of different parameters. Different absorbing parameters will affect the absorbing ability. We find the suitable parameters after many numerical experiments. Fourth, We compare the response with the 1-Dnumerical result method for a homogeneous half-space to verify the correctness of our algorithm.When the model contains 107*107*53 grid points, the conductivity is 0.05S/m. The results show that Leapfrog ADI-FDTD need less simulation time and computer storage space, compared with ADI-FDTD. The calculation speed decreases nearly four times, memory occupation decreases about 32.53%. Thus, this algorithm is more efficient than the conventional ADI-FDTD method for HTEM detection, and is more precise than that of explicit FDTD in the late time.

  19. Understanding Evapotranspiration Trends and their Driving Mechanisms: An investigation across CONUS based on numerical modeling

    Science.gov (United States)

    Parr, D.; Wang, G.; Fu, C.

    2015-12-01

    As shown by climate models, increasing global temperatures and enhanced greenhouse gas concentration such as CO2 have had major effects on the dynamics of the hydrologic cycle and the surface energy budget, in particular, on evapotranspiration (ET). ET has significant decadal variations whether it be regionally or globally and variations of ET have major environmental and socioeconomic impacts. A number of recent studies have found a global increase in annual mean ET around 7mm per year per decade from about 1982 to the late 1990s. These results correspond with what is expected from an intensification of the hydrological cycle. However, the increasing ET trend did not continue after 1998 and from 1998-2008 this global trend was replaced with a decreasing trend of similar magnitude. This study uses numerical modeling to investigate if similar changing ET trends emerge in the continental U.S and part of northern Mexico. After validating model simulated evaporative fluxes and comparing spatial patterns to the aforementioned studies, various changing trends of different signs are identified across the U.S., and specific regions with strong signals of change are chosen for further examination with the purpose of identifying the root causes of these changing trends and which variables are most influential towards change. Experimental simulations conducted to isolate the most influential factors towards ET reveal that precipitation amount as well as its characteristics have the greatest impact on the ET trends discovered, with other factors like wind and air temperatures displaying less influence over inter-annual trends. This study helps better understand terrestrial ET and it's interactions which will help facilitate better predictions of change in surface climate such as heatwaves and droughts as well as impacts on water resources.

  20. Numerical simulation of divergent rocket-based-combined-cycle performances under the flight condition of Mach 3

    Science.gov (United States)

    Cui, Peng; Xu, WanWu; Li, Qinglian

    2018-01-01

    Currently, the upper operating limit of the turbine engine is Mach 2+, and the lower limit of the dual-mode scramjet is Mach 4. Therefore no single power systems can operate within the range between Mach 2 + and Mach 4. By using ejector rockets, Rocket-based-combined-cycle can work well in the above scope. As the key component of Rocket-based-combined-cycle, the ejector rocket has significant influence on Rocket-based-combined-cycle performance. Research on the influence of rocket parameters on Rocket-based-combined-cycle in the speed range of Mach 2 + to Mach 4 is scarce. In the present study, influences of Mach number and total pressure of the ejector rocket on Rocket-based-combined-cycle were analyzed numerically. Due to the significant effects of the flight conditions and the Rocket-based-combined-cycle configuration on Rocket-based-combined-cycle performances, flight altitude, flight Mach number, and divergence ratio were also considered. The simulation results indicate that matching lower altitude with higher flight Mach numbers can increase Rocket-based-combined-cycle thrust. For another thing, with an increase of the divergent ratio, the effect of the divergent configuration will strengthen and there is a limit on the divergent ratio. When the divergent ratio is greater than the limit, the effect of divergent configuration will gradually exceed that of combustion on supersonic flows. Further increases in the divergent ratio will decrease Rocket-based-combined-cycle thrust.

  1. The Participation of Mothers, Fathers, and Siblings in Family-Based Treatment for Adolescent Anorexia Nervosa.

    Science.gov (United States)

    Hughes, Elizabeth K; Burton, Claire; Le Grange, Daniel; Sawyer, Susan M

    2017-10-27

    In family-based treatment (FBT) for adolescent anorexia nervosa, all family members are encouraged to attend sessions with the understanding that absences negatively impact treatment. There are, however, many obstacles to family members' attendance, and there is no research to indicate whether family member attendance improves treatment outcomes. We examined attendance patterns of 198 families who participated in FBT at a specialist pediatric eating disorders program and assessed the extent to which participation by mothers (n = 194), fathers (n = 175), and siblings (n = 165; 50% female) predicted outcome. All mothers attended at least one session, and 74% attended all sessions. By comparison, 95% of fathers and 73% of siblings attended at least one session, and 33% of fathers and 1% of siblings attended all sessions. The mean proportion of sessions attended was 94% for mothers, 72% for fathers, and 20% for siblings. Over 6 months of treatment, the proportion of mothers who attended each session was largely stable; fathers' attendance declined slowly, and siblings' attendance declined more rapidly. Greater attendance by fathers predicted higher weight and lower eating disorder symptoms in adolescents at end of treatment. Remission at end of treatment was associated with higher attendance by fathers (M = 81% vs. M = 69%). Achieving sustained engagement of the whole family system in FBT is a considerable challenge. However, this study demonstrates that implementing processes that encourage and enable family members to attend treatment sessions could have significant benefits for patient outcomes.

  2. Numerical Simulation of Freak Waves Based on the Four-Order Nonlinear Schr(o)dinger Equation

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yun-qiu; ZHANG Ning-chuan; PEI Yu-guo

    2007-01-01

    A numerical wave model based on the modified four-order nonlinear Schrodinger (NLS) equation in deep water is developed to simulate freak waves. A standard split-step, pseudo-spectral method is used to solve NLS equation. The validation of the model is firstly verified, and then the simulation of freak waves is performed by changing sideband conditions. Results show that freak waves entirely consistent with the definition in the evolution of wave trains are obtained. The possible occurrence mechanism of freak waves is discussed and the relevant characteristics are also analyzed.

  3. Calculation of temperature rise for cable conductor of DCS cabinet power based on theory of numerical thermal transfer

    International Nuclear Information System (INIS)

    Tian Yong; Zhang Longqiang; Yang Zhen; Yu Bin

    2014-01-01

    In order to ensure a long-term reliable operation of the DCS cabinet's 220 V AC power cable, it was needed to confirm whether the conductor temperature rise of power cable meet the requirement of the cable specification. Based on the actual data in site and the theory of numerical heat transfer, conservative model was established, and the conductor temperature was calculated. The calculation results show that the cable arrangement on the cable tray will not lead to the conductor temperature rise of power cable over than the required temperature in technical specification. (authors)

  4. Numerical studies of carbon paper-based vanadium redox flow batteries

    International Nuclear Information System (INIS)

    Won, Seongyeon; Oh, Kyeongmin; Ju, Hyunchul

    2016-01-01

    ABSTRACT: This study analyzed theoretically the effects of a carbon paper (CP)-based electrode on the performance of a vanadium redox flow battery (VRFB). Compared to conventional carbon felt-based electrode materials, the CP-based electrode showed superior characteristics in facilitating the redox reactions of VO"2"+/VO_2"+ and V"2"+/V"3"+ couples, such as better electrochemical activity and higher electronic conductivity. A three-dimensional, non-isothermal VRFB model developed in a previous study was applied to a range of single cell structures equipped with CP-based electrodes and flow channels in the current collectors. The model was then validated using the experimental data measured under the CP- and channel-based VRFB geometries. The model successfully captured the experimental trend that showed a higher discharging performance with increasing number of CP layers used for each electrode. The simulation results clearly showed that the activation overpotentials in the electrodes were reduced significantly using more CP layers, which dominated over the effects of increased mass transport limitation of vanadium ions due to the thicker electrode.

  5. Family Interview to Enable Donation of Organs for Transplantation: Evidence-based Practice.

    Science.gov (United States)

    de Moraes, E L; Dos Santos, M J; de Barros E Silva, L B; de Lima Pilan, L A S; de Lima, E A A; de Santana, A C; Martins, M S

    2018-04-01

    In this study we propose a theoretical and practical basis for the best practices for interviewing relatives of brain-dead eligible organ donors. This investigation was a reflective study of the methodologic factors of the family interview that affect their decision regarding the donation of a deceased patient's organs for transplantation. The articles that formed the empirical basis of the trial were obtained from PubMed, which is a free-access tool of the MEDLINE database of the United States National Library of Medicine. Published articles that allowed us to reflect on evidence-based family interview practice were selected. Thirty-six scientific articles were used to guide our assessment the family interview, providing evidence for its adequate execution in view of the following prerequisites: When should the family interview be performed? Where should it be done? How many and which people should participate in the interview? Who should perform it? How should it be done? Scientific studies offer evidence to donation and transplantation specialists that can help them in their daily work regarding their interactions with relatives in the process of decisionmaking and family consent. Copyright © 2018 Elsevier Inc. All rights reserved.

  6. Gene Environment Interactions and Predictors of Colorectal Cancer in Family-Based, Multi-Ethnic Groups

    Directory of Open Access Journals (Sweden)

    S. Pamela K. Shiao

    2018-02-01

    Full Text Available For the personalization of polygenic/omics-based health care, the purpose of this study was to examine the gene–environment interactions and predictors of colorectal cancer (CRC by including five key genes in the one-carbon metabolism pathways. In this proof-of-concept study, we included a total of 54 families and 108 participants, 54 CRC cases and 54 matched family friends representing four major racial ethnic groups in southern California (White, Asian, Hispanics, and Black. We used three phases of data analytics, including exploratory, family-based analyses adjusting for the dependence within the family for sharing genetic heritage, the ensemble method, and generalized regression models for predictive modeling with a machine learning validation procedure to validate the results for enhanced prediction and reproducibility. The results revealed that despite the family members sharing genetic heritage, the CRC group had greater combined gene polymorphism rates than the family controls (p < 0.05, on MTHFR C677T, MTR A2756G, MTRR A66G, and DHFR 19 bp except MTHFR A1298C. Four racial groups presented different polymorphism rates for four genes (all p < 0.05 except MTHFR A1298C. Following the ensemble method, the most influential factors were identified, and the best predictive models were generated by using the generalized regression models, with Akaike’s information criterion and leave-one-out cross validation methods. Body mass index (BMI and gender were consistent predictors of CRC for both models when individual genes versus total polymorphism counts were used, and alcohol use was interactive with BMI status. Body mass index status was also interactive with both gender and MTHFR C677T gene polymorphism, and the exposure to environmental pollutants was an additional predictor. These results point to the important roles of environmental and modifiable factors in relation to gene–environment interactions in the prevention of CRC.

  7. Parental guided self-help family based treatment for adolescents with anorexia nervosa: A feasibility study.

    Science.gov (United States)

    Lock, James; Darcy, Alison; Fitzpatrick, Kathleen Kara; Vierhile, Molly; Sadeh-Sharvit, Shiri

    2017-09-01

    Family-based treatment (FBT) is an evidence-based treatment for adolescent anorexia nervosa (AN), but many families cannot access it. This study evaluated feasibility, acceptability, and preliminary treatment effects of a parental guided self-help (GSH) version of FBT for adolescent AN. This was a case-series design. Parents of medically stable adolescents (11-18 years) with DSM-5 AN were recruited over 12 months. Parents received online training in parental GSH FBT and 12 20-30 min GSH sessions by phone or online over 6 months. Recruitment, dropout, changes in weight, and eating-related psychopathology were assessed. Analyses used mixed modeling that included all data for all participants. Of the 19 families that participated, most were white (94%) and from intact families (88%). Baseline median BMI (mBMI) percent was 85.01% (SD = 4.31). Participants' mBMI percent increased to 97.31% (SD ± 7.48) at the end of treatment (EOT) (ES = 2.06; CI= 0.13-3.99). Eating-related psychopathology improved by EOT (ES = 0.58; CI=.04-1.21). Dropout rate was 21% during treatment and 33% during follow-up. Parental GSH-FBT is feasible and acceptable to families willing to undertake online treatment. Follow-up data was only available for nine families (47%); thus further systematic evaluation is required before reaching conclusions about the efficacy of this approach. © 2017 Wiley Periodicals, Inc.

  8. Bridges Dynamic Parameters Identification Based On Experimental and Numerical Method Comparison in Regard with Traffic Seismicity

    Science.gov (United States)

    Krkošková, Katarína; Papán, Daniel; Papánová, Zuzana

    2017-10-01

    The technical seismicity negatively affects the environment, buildings and structures. Technical seismicity means seismic shakes caused by force impulse, random process and unnatural origin. The vibration influence on buildings is evaluated in the Eurocode 8 in Slovak Republic, however, the Slovak Technical Standard STN 73 0036 includes solution of the technical seismicity. This standard also classes bridges into the group of structures that are significant in light of the technical seismicity - the group “U”. Using the case studies analysis by FEM simulation and comparison is necessary because of brief norm evaluation of this issue. In this article, determinate dynamic parameters by experimental measuring and numerical method on two real bridges are compared. First bridge, (D201 - 00) is Scaffold Bridge on the road I/11 leading to the city of Čadca and is situated in the city of Žilina. It is eleven - span concrete road bridge. The railway is the obstacle, which this bridge spans. Second bridge (M5973 Brodno) is situated in the part of Žilina City on the road of I/11. It is concrete three - span road bridge built as box girder. The computing part includes 3D computational models of the bridges. First bridge (D201 - 00) was modelled in the software of IDA Nexis as the slab - wall model. The model outputs are natural frequencies and natural vibration modes. Second bridge (M5973 Brodno) was modelled in the software of VisualFEA. The technical seismicity corresponds with the force impulse, which was put into this model. The model outputs are vibration displacements, velocities and accelerations. The aim of the experiments was measuring of the vibration acceleration time record of bridges, and there was need to systematic placement of accelerometers. The vibration acceleration time record is important during the under - bridge train crossing, about the first bridge (D201 - 00) and the vibration acceleration time domain is important during deducing the force

  9. Neurocognitive performance in family-based and case-control studies of schizophrenia

    Science.gov (United States)

    Gur, Ruben C.; Braff, David L.; Calkins, Monica E.; Dobie, Dorcas J.; Freedman, Robert; Green, Michael F.; Greenwood, Tiffany A.; Lazzeroni, Laura C.; Light, Gregory A.; Nuechterlein, Keith H.; Olincy, Ann; Radant, Allen D.; Seidman, Larry J.; Siever, Larry J.; Silverman, Jeremy M.; Sprock, Joyce; Stone, William S.; Sugar, Catherine A.; Swerdlow, Neal R.; Tsuang, Debby W.; Tsuang, Ming T.; Turetsky, Bruce I.; Gur, Raquel E.

    2014-01-01

    Background Neurocognitive deficits in schizophrenia (SZ) are established and the Consortium on the Genetics of Schizophrenia (COGS) investigated such measures as endophenotypes in family-based (COGS-1) and case-control (COGS-2) studies. By requiring family participation, family-based sampling may result in samples that vary demographically and perform better on neurocognitive measures. Methods The Penn computerized neurocognitive battery (CNB) evaluates accuracy and speed of performance for several domains and was administered across sites in COGS-1 and COGS-2. Most tests were included in both studies. COGS-1 included 328 patients with SZ and 497 healthy comparison subjects (HCS) and COGS-2 included 1195 patients and 1009 HCS. Results Demographically, COGS-1 participants were younger, more educated, with more educated parents and higher estimated IQ compared to COGS-2 participants. After controlling for demographics, the two samples produced very similar performance profiles compared to their respective controls. As expected, performance was better and with smaller effect sizes compared to controls in COGS-1 relative to COGS-2. Better performance was most pronounced for spatial processing while emotion identification had large effect sizes for both accuracy and speed in both samples. Performance was positively correlated with functioning and negatively with negative and positive symptoms in both samples, but correlations were attenuated in COGS-2, especially with positive symptoms. Conclusions Patients ascertained through family-based design have more favorable demographics and better performance on some neurocognitive domains. Thus, studies that use case-control ascertainment may tap into populations with more severe forms of illness that are exposed to less favorable factors compared to those ascertained with family-based designs. PMID:25432636

  10. Neurocognitive performance in family-based and case-control studies of schizophrenia.

    Science.gov (United States)

    Gur, Ruben C; Braff, David L; Calkins, Monica E; Dobie, Dorcas J; Freedman, Robert; Green, Michael F; Greenwood, Tiffany A; Lazzeroni, Laura C; Light, Gregory A; Nuechterlein, Keith H; Olincy, Ann; Radant, Allen D; Seidman, Larry J; Siever, Larry J; Silverman, Jeremy M; Sprock, Joyce; Stone, William S; Sugar, Catherine A; Swerdlow, Neal R; Tsuang, Debby W; Tsuang, Ming T; Turetsky, Bruce I; Gur, Raquel E

    2015-04-01

    Neurocognitive deficits in schizophrenia (SZ) are established and the Consortium on the Genetics of Schizophrenia (COGS) investigated such measures as endophenotypes in family-based (COGS-1) and case-control (COGS-2) studies. By requiring family participation, family-based sampling may result in samples that vary demographically and perform better on neurocognitive measures. The Penn computerized neurocognitive battery (CNB) evaluates accuracy and speed of performance for several domains and was administered across sites in COGS-1 and COGS-2. Most tests were included in both studies. COGS-1 included 328 patients with SZ and 497 healthy comparison subjects (HCS) and COGS-2 included 1195 patients and 1009 HCS. Demographically, COGS-1 participants were younger, more educated, with more educated parents and higher estimated IQ compared to COGS-2 participants. After controlling for demographics, the two samples produced very similar performance profiles compared to their respective controls. As expected, performance was better and with smaller effect sizes compared to controls in COGS-1 relative to COGS-2. Better performance was most pronounced for spatial processing while emotion identification had large effect sizes for both accuracy and speed in both samples. Performance was positively correlated with functioning and negatively with negative and positive symptoms in both samples, but correlations were attenuated in COGS-2, especially with positive symptoms. Patients ascertained through family-based design have more favorable demographics and better performance on some neurocognitive domains. Thus, studies that use case-control ascertainment may tap into populations with more severe forms of illness that are exposed to less favorable factors compared to those ascertained with family-based designs.

  11. Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing

    DEFF Research Database (Denmark)

    Comminal, Raphaël; Serdeczny, Marcin P.; Pedersen, David B.

    2018-01-01

    -based additive manufacturing, as well as the surface roughness of the fabricated part. Under the assumptions of an isothermal Newtonian fluid and a creeping laminar flow, the deposition flow is controlled by two parameters: the gap distance between the extrusion nozzle and the substrate, and the velocity ratio...

  12. Prediction of slope stability based on numerical modeling of stress–strain state of rocks

    Science.gov (United States)

    Kozhogulov Nifadyev, KCh, VI; Usmanov, SF

    2018-03-01

    The paper presents the developed technique for the estimation of rock mass stability based on the finite element modeling of stress–strain state of rocks. The modeling results on the pit wall landslide as a flow of particles along a sloped surface are described.

  13. Numerical taxonomy of the genus Pestivirus based on palindromic nucleotide substitutions in the 5' untranslated region.

    Science.gov (United States)

    Giangaspero, Massimo; Harasawa, Ryô

    2007-12-01

    The palindromic nucleotide substitutions (PNS) at the three variable loci (V1, V2 and V3) in the 5' untranslated region (UTR) of Pestivirus RNA have been considered for taxonomical segregation of species, through the evaluation of 430 genomic sequences. On the basis of qualitative and quantitative secondary structure characteristics, six species have been identified: Bovine viral diarrhea virus 1 (BVDV-1), Bovine viral diarrhea virus 2 (BVDV-2), Classical swine fever virus (CSFV), Border disease virus (BDV), the tentative species Giraffe and a new proposed taxon named Pronghorn. The first step was qualitative and consisted in the characterization of the different positions of the three stems and loops in the 5' UTR sequences of all the strains under consideration belonging to the genus. Secondary structure sequences showing divergent base-pair combinations have been aligned for comparison. Palindromic positions have been characterized according to changes in nucleotide base-pairs identifying low-variable positions (LVP) including base-pairs present in less than 80% of the genus. The second step was quantitative, allowing the identification of genomic groups by clustering the base-pair combinations according to LVP. Relatedness among types was evaluated to identify homogeneous groups. Cross comparisons between types within the genus have been evaluated by computing the divergence percentage thus clarifying borderline and multirelated sequences.

  14. Numerical analysis

    CERN Document Server

    Khabaza, I M

    1960-01-01

    Numerical Analysis is an elementary introduction to numerical analysis, its applications, limitations, and pitfalls. Methods suitable for digital computers are emphasized, but some desk computations are also described. Topics covered range from the use of digital computers in numerical work to errors in computations using desk machines, finite difference methods, and numerical solution of ordinary differential equations. This book is comprised of eight chapters and begins with an overview of the importance of digital computers in numerical analysis, followed by a discussion on errors in comput

  15. Numerical relativity

    CERN Document Server

    Shibata, Masaru

    2016-01-01

    This book is composed of two parts: First part describes basics in numerical relativity, that is, the formulations and methods for a solution of Einstein's equation and general relativistic matter field equations. This part will be helpful for beginners of numerical relativity who would like to understand the content of numerical relativity and its background. The second part focuses on the application of numerical relativity. A wide variety of scientific numerical results are introduced focusing in particular on the merger of binary neutron stars and black holes.

  16. Profiling Fast Healthcare Interoperability Resources (FHIR) of Family Health History based on the Clinical Element Models.

    Science.gov (United States)

    Lee, Jaehoon; Hulse, Nathan C; Wood, Grant M; Oniki, Thomas A; Huff, Stanley M

    2016-01-01

    In this study we developed a Fast Healthcare Interoperability Resources (FHIR) profile to support exchanging a full pedigree based family health history (FHH) information across multiple systems and applications used by clinicians, patients, and researchers. We used previously developed clinical element models (CEMs) that are capable of representing the FHH information, and derived essential data elements including attributes, constraints, and value sets. We analyzed gaps between the FHH CEM elements and existing FHIR resources. Based on the analysis, we developed a profile that consists of 1) FHIR resources for essential FHH data elements, 2) extensions for additional elements that were not covered by the resources, and 3) a structured definition to integrate patient and family member information in a FHIR message. We implemented the profile using an open-source based FHIR framework and validated it using patient-entered FHH data that was captured through a locally developed FHH tool.

  17. Sharing Family Life Information Through Video Calls and Other Information and Communication Technologies and the Association With Family Well-Being: Population-Based Survey.

    Science.gov (United States)

    Shen, Chen; Wang, Man Ping; Chu, Joanna Tw; Wan, Alice; Viswanath, Kasisomayajula; Chan, Sophia Siu Chee; Lam, Tai Hing

    2017-11-23

    The use of information and communication technologies (ICTs) for information sharing among family members is increasing dramatically. However, little is known about the associated factors and the influence on family well-being. The authors investigated the pattern and social determinants of family life information sharing with family and the associations of different methods of sharing with perceived family health, happiness, and harmony (3Hs) in Hong Kong, where mobile phone ownership and Internet access are among the most prevalent, easiest, and fastest in the world. A territory-wide population-based telephone survey was conducted from January to August 2016 on different methods of family life information (ie, information related to family communication, relationships with family members, emotion and stress management) sharing with family members, including face-to-face, phone, instant messaging (IM), social media sites, video calls, and email. Family well-being was assessed by three single items on perceived family health, happiness, and harmony, with higher scores indicating better family well-being. Adjusted prevalence ratios were used to assess the associations of sociodemographic factors with family life information sharing, and adjusted beta coefficients for family well-being. Of 2017 respondents, face-to-face was the most common method to share family life information (74.45%, 1502/2017), followed by IM (40.86%, 824/2017), phone (28.10%, 567/2017), social media sites (11.91%, 240/2017), video calls (5.89%, 119/2017), and email (5.48%, 111/2017). Younger age and higher education were associated with the use of any (at least one) method, face-to-face, IM, and social media sites for sharing family life information (all P for trend face-to-face, and IM (all P for trend face-to-face (beta=0.62, 95% CI 0.45-0.80) and video calls (beta=0.34, 95% CI 0.04-0.65). The combination of face-to-face and video calls was most strongly associated with a higher level of

  18. Family presence during trauma activations and medical resuscitations in a pediatric emergency department: an evidence-based practice project.

    Science.gov (United States)

    Kingsnorth, Jennifer; O'Connell, Karen; Guzzetta, Cathie E; Edens, Jacki Curreri; Atabaki, Shireen; Mecherikunnel, Anne; Brown, Kathleen

    2010-03-01

    The existing family presence literature indicates that implementation of a family presence policy can result in positive outcomes. The purpose of our evidence-based practice project was to evaluate a family presence intervention using the 6 A's of the evidence cycle (ask, acquire, appraise, apply, analyze, and adopt/adapt). For step 1 (ask), we propose the following question: Is it feasible to implement a family presence intervention during trauma team activations and medical resuscitations in a pediatric emergency department using national guidelines to ensure appropriate family member behavior and uninterrupted patient care? Regarding steps 2 through 4 (acquire, appraise, and apply), our demonstration project was conducted in a pediatric emergency department during the implementation of a new family presence policy. Our family presence intervention incorporated current appraisal of literature and national guidelines including family screening, family preparation, and use of family presence facilitators. We evaluated whether it was feasible to implement the steps of our intervention and whether the intervention was safe in ensuring uninterrupted patient care. With regard to step 5 (analyze), family presence was evaluated in 106 events, in which 96 families were deemed appropriate and chose to be present. Nearly all families (96%) were screened before entering the room, and all were deemed appropriate candidates. Facilitators guided the family during all events. One family presence event was terminated. In all cases patient care was not interrupted. Regarding step 6 (adopt/adapt), our findings document the feasibility of implementing a family presence intervention in a pediatric emergency department while ensuring uninterrupted patient care. We have adopted family presence as a standard practice. This project can serve as the prototype for others. Copyright (c) 2010 Emergency Nurses Association. Published by Mosby, Inc. All rights reserved.

  19. Numerically-based ducted propeller design using vortex lattice lifting line theory

    OpenAIRE

    Stubblefield, John M.

    2008-01-01

    CIVINS (Civilian Institutions) Thesis document This thesis used vortex lattice lifting line theory to model an axisymmetrical-ducted propeller with no gap between the duct and the propeller. The theory required to model the duct and its interaction with the propeller were discussed and implemented in Open-source Propeller Design and Analysis Program (OpenProp). Two routines for determining the optimum circulation distribution were considered, and a method based on calculus of variation...

  20. Numerical investigation of aerodynamic performance of darrieus wind turbine based on the magnus effect

    OpenAIRE

    L Khadir; H Mrad

    2016-01-01

    The use of several developmental approaches is the researchers’ major preoccupation with the DARRIEUS wind turbine. This paper presents the first approach and results of a wide computational investigation on the aerodynamics of a vertical axis DARRIEUS wind turbine based on the MAGNUS effect. Consequently, wind tunnel tests were carried out to ascertain overall performance of the turbine and two-dimensional unsteady computational fluid dynamics (CFD) models were generated to help understand t...

  1. A numerical simulation model of valence-change-based resistive switching

    OpenAIRE

    Marchewka, Astrid

    2017-01-01

    Due to their superior scalability and performance, nanoscale resistive switches based on the valence-change mechanism are considered promising candidates for future nonvolatile memory and logic applications. These devices are metal-oxide-metal structures that can be reversibly switched between different resistance states by electrical signals. Typically, they contain one Schottky-like and one ohmic-like metal-oxide contact and exhibit bipolar switching. The switching mechanism and the initial...

  2. A numerical integration-based yield estimation method for integrated circuits

    International Nuclear Information System (INIS)

    Liang Tao; Jia Xinzhang

    2011-01-01

    A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

  3. A numerical integration-based yield estimation method for integrated circuits

    Energy Technology Data Exchange (ETDEWEB)

    Liang Tao; Jia Xinzhang, E-mail: tliang@yahoo.cn [Key Laboratory of Ministry of Education for Wide Bandgap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

    2011-04-15

    A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

  4. Sequence-based heuristics for faster annotation of non-coding RNA families.

    Science.gov (United States)

    Weinberg, Zasha; Ruzzo, Walter L

    2006-01-01

    Non-coding RNAs (ncRNAs) are functional RNA molecules that do not code for proteins. Covariance Models (CMs) are a useful statistical tool to find new members of an ncRNA gene family in a large genome database, using both sequence and, importantly, RNA secondary structure information. Unfortunately, CM searches are extremely slow. Previously, we created rigorous filters, which provably sacrifice none of a CM's accuracy, while making searches significantly faster for virtually all ncRNA families. However, these rigorous filters make searches slower than heuristics could be. In this paper we introduce profile HMM-based heuristic filters. We show that their accuracy is usually superior to heuristics based on BLAST. Moreover, we compared our heuristics with those used in tRNAscan-SE, whose heuristics incorporate a significant amount of work specific to tRNAs, where our heuristics are generic to any ncRNA. Performance was roughly comparable, so we expect that our heuristics provide a high-quality solution that--unlike family-specific solutions--can scale to hundreds of ncRNA families. The source code is available under GNU Public License at the supplementary web site.

  5. "Effects of a Web-Based Intervention on Family Functioning Following Pediatric Traumatic Brain Injury"

    Science.gov (United States)

    Minich, Nori; Taylor, H. Gerry; Kirkwood, Michael; Brown, Tanya Maines; Stancin, Terry; Wade, Shari L

    2015-01-01

    Objective Investigate effectiveness of an online Counselor-Assisted Problem-Solving (CAPS) intervention on family functioning after traumatic brain injury (TBI). Methods Participants were randomized to CAPS (n = 65) or internet resource comparison (IRC; n = 67). CAPS is a counselor-assisted web-based program. IRC was given access to online resources. Outcomes were examined 6 months, 12 months, and 18 months after baseline. Injury severity, age, and SES were examined as moderators. Results A main effect of time was noted for teen-reported conflict and parent-reported problem solving. CAPS had decreased parent-reported conflict and a reduction in parental effective communication. Effects were specific to subsets of the sample. Conclusions CAPS, a family-based problem-solving intervention designed to address problem behaviors, had modest effects on some aspects of family functioning, when compared to IRC. Effects were generally limited to subsets of the families and were not evident across all follow-up assessments. PMID:26461100

  6. Familial Risks of Tourette Syndrome and Chronic Tic Disorders. A Population-Based Cohort Study.

    Science.gov (United States)

    Mataix-Cols, David; Isomura, Kayoko; Pérez-Vigil, Ana; Chang, Zheng; Rück, Christian; Larsson, K Johan; Leckman, James F; Serlachius, Eva; Larsson, Henrik; Lichtenstein, Paul

    2015-08-01

    Tic disorders, including Tourette syndrome (TS) and chronic tic disorders (CTDs), are assumed to be strongly familial and heritable. Although gene-searching efforts are well under way, precise estimates of familial risk and heritability are lacking. Previous controlled family studies were small and typically conducted within specialist clinics, resulting in potential ascertainment biases. They were also underpowered to disentangle genetic from environmental factors that contribute to the observed familiality. Twin studies have been either very small or based on parent-reported tics in population-based (nonclinical) twin samples. To provide unbiased estimates of familial risk and heritability of tic disorders at the population level. In this population cohort, multigenerational family study, we used a validated algorithm to identify 4826 individuals diagnosed as having TS or CTDs (76.2% male) in the Swedish National Patient Register from January 1, 1969, through December 31, 2009. We studied risks for TS or CTDs in all biological relatives of probands compared with relatives of unaffected individuals (matched on a 1:10 ratio) from the general population. Structural equation modeling was used to estimate the heritability of tic disorders. The risk for tic disorders among relatives of probands with tic disorders increased proportionally to the degree of genetic relatedness. The risks for first-degree relatives (odds ratio [OR], 18.69; 95% CI, 14.53-24.05) were significantly higher than for second-degree relatives (OR, 4.58; 95% CI, 3.22-6.52) and third-degree relatives (OR, 3.07; 95% CI, 2.08-4.51). First-degree relatives at similar genetic distances (eg, parents, siblings, and offspring) had similar risks for tic disorders despite different degrees of shared environment. The risks for full siblings (50% genetic similarity; OR, 17.68; 95% CI, 12.90-24.23) were significantly higher than those for maternal half siblings (25% genetic similarity; OR, 4.41; 95

  7. Model for particle masses, flavor mixing, and CP violation, based on spontaneously broken discrete chiral symmetry as the origin of families

    International Nuclear Information System (INIS)

    Adler, S.L.

    1999-01-01

    We construct extensions of the standard model based on the hypothesis that Higgs bosons also exhibit a family structure and that the flavor weak eigenstates in the three families are distinguished by a discrete Z 6 chiral symmetry that is spontaneously broken by the Higgs sector. We study in detail at the tree level models with three Higgs doublets and with six Higgs doublets comprising two weakly coupled sets of three. In a leading approximation of S 3 cyclic permutation symmetry the three-Higgs-doublet model gives a open-quotes democraticclose quotes mass matrix of rank 1, while the six-Higgs-doublet model gives either a rank-1 mass matrix or, in the case when it spontaneously violates CP, a rank-2 mass matrix corresponding to nonzero second family masses. In both models, the CKM matrix is exactly unity in the leading approximation. Allowing small explicit violations of cyclic permutation symmetry generates small first family masses in the six-Higgs-doublet model, and first and second family masses in the three-Higgs-doublet model, and gives a nontrivial CKM matrix in which the mixings of the first and second family quarks are naturally larger than mixings involving the third family. Complete numerical fits are given for both models, flavor-changing neutral current constraints are discussed in detail, and the issues of unification of couplings and neutrino masses are addressed. On a technical level, our analysis uses the theory of circulant and retrocirculant matrices, the relevant parts of which are reviewed. copyright 1998 The American Physical Society

  8. A variational numerical method based on finite elements for the nonlinear solution characteristics of the periodically forced Chen system

    Science.gov (United States)

    Khan, Sabeel M.; Sunny, D. A.; Aqeel, M.

    2017-09-01

    Nonlinear dynamical systems and their solutions are very sensitive to initial conditions and therefore need to be approximated carefully. In this article, we present and analyze nonlinear solution characteristics of the periodically forced Chen system with the application of a variational method based on the concept of finite time-elements. Our approach is based on the discretization of physical time space into finite elements where each time-element is mapped to a natural time space. The solution of the system is then determined in natural time space using a set of suitable basis functions. The numerical algorithm is presented and implemented to compute and analyze nonlinear behavior at different time-step sizes. The obtained results show an excellent agreement with the classical RK-4 and RK-5 methods. The accuracy and convergence of the method is shown by comparing numerically computed results with the exact solution for a test problem. The presented method has shown a great potential in dealing with the solutions of nonlinear dynamical systems and thus can be utilized in delineating different features and characteristics of their solutions.

  9. A new numerical treatment based on Lucas polynomials for 1D and 2D sinh-Gordon equation

    Science.gov (United States)

    Oruç, Ömer

    2018-04-01

    In this paper, a new mixed method based on Lucas and Fibonacci polynomials is developed for numerical solutions of 1D and 2D sinh-Gordon equations. Firstly time variable discretized by central finite difference and then unknown function and its derivatives are expanded to Lucas series. With the help of these series expansion and Fibonacci polynomials, matrices for differentiation are derived. With this approach, finding the solution of sinh-Gordon equation transformed to finding the solution of an algebraic system of equations. Lucas series coefficients are acquired by solving this system of algebraic equations. Then by plugginging these coefficients into Lucas series expansion numerical solutions can be obtained consecutively. The main objective of this paper is to demonstrate that Lucas polynomial based method is convenient for 1D and 2D nonlinear problems. By calculating L2 and L∞ error norms of some 1D and 2D test problems efficiency and performance of the proposed method is monitored. Acquired accurate results confirm the applicability of the method.

  10. Extinction effects of atmospheric compositions on return signals of space-based lidar from numerical simulation

    Science.gov (United States)

    Yao, Lilin; Wang, Fu; Min, Min; Zhang, Ying; Guo, Jianping; Yu, Xiao; Chen, Binglong; Zhao, Yiming; Wang, Lidong

    2018-05-01

    The atmospheric composition induced extinction effect on return signals of space-based lidar remains incomprehensively understood, especially around 355 nm and 2051 nm channels. Here we simulated the extinction effects of atmospheric gases (e.g., H2O, CO2, and O3) and six types of aerosols (clean continental, clean marine, dust, polluted continental, polluted dust, and smoke) on return signals of space-based lidar system at 355 nm, 532 nm, 1064 nm, and 2051 nm channels, based on a robust lidar return signal simulator in combination with radiative transfer model (LBLRTM). Results show significant Rayleigh (molecular) scattering effects in the return signals at 355 nm and 532 nm channels, which markedly decays with increases in wavelength. The spectral transmittance of CO2 is nearly 0, yet the transmittance of H2O is approximately 100% at 2051 nm, which verifies this 2051 nm channel is suitable for CO2 retrieval. The spectral transmittance also reveals another possible window for CO2 and H2O detection at 2051.6 nm, since their transmittance both near 0.5. Moreover the corresponding Doppler return signals at 2051.6 nm channel can be used to retrieve wind field. Thus we suggest 2051 nm channel may better be centered at 2051.6 nm. Using the threshold for the signal-to-noise ratio (SNR) of return signals, the detection ranges for three representative distribution scenarios for the six types of aerosols at four typical lidar channels are determined. The results clearly show that high SNR values can be seen ubiquitously in the atmosphere ranging from the height of aerosol layer top to 25 km at 355 nm, and can been found at 2051.6 nm in the lower troposphere that highly depends on aerosol distribution scenario in the vertical. This indicates that the Doppler space-based lidar system with a double-channel joint detection mode is able to retrieve atmospheric wind field or profile from 0 to 25 km.

  11. Simulation of 2D rarefied gas flows based on the numerical solution of the Boltzmann equation

    Science.gov (United States)

    Poleshkin, Sergey O.; Malkov, Ewgenij A.; Kudryavtsev, Alexey N.; Shershnev, Anton A.; Bondar, Yevgeniy A.; Kohanchik, A. A.

    2017-10-01

    There are various methods for calculating rarefied gas flows, in particular, statistical methods and deterministic methods based on the finite-difference solutions of the Boltzmann nonlinear kinetic equation and on the solutions of model kinetic equations. There is no universal method; each has its disadvantages in terms of efficiency or accuracy. The choice of the method depends on the problem to be solved and on parameters of calculated flows. Qualitative theoretical arguments help to determine the range of parameters of effectively solved problems for each method; however, it is advisable to perform comparative tests of calculations of the classical problems performed by different methods and with different parameters to have quantitative confirmation of this reasoning. The paper provides the results of the calculations performed by the authors with the help of the Direct Simulation Monte Carlo method and finite-difference methods of solving the Boltzmann equation and model kinetic equations. Based on this comparison, conclusions are made on selecting a particular method for flow simulations in various ranges of flow parameters.

  12. A numerical study of multi filament formation in metal-ion based CBRAM

    Directory of Open Access Journals (Sweden)

    Dan Berco

    2016-02-01

    Full Text Available This study investigates the underlying mechanisms of multiple conductive filaments (CF creation in metal-ion based conductive bridge RRAM (CBRAM by using the Metropolis Monte Carlo algorithm and suggests a possible explanation for this phenomenon. The simulation method is demonstrated over a Cu/HfO2 structure, starting from a random initial distribution of oxygen vacancies (OV defects in the resistive switching layer, to a formed CF and ending in a ruptured state. the results indicate that “Hot Spots” (HS, where agglomeration of OV trap like states for electron hopping based conduction induce local heating, create favorable energy conditions to attract diffused metal species originating from the top electrode. While HS may be created and annihilated by random OV generation and recombination processes, the precipitated metal forms a stem out of which a CF could evolve. The CF stem’s final growth stage is mainly driven by drift and diffusion. This process may lead to the formation of one or more CFs as a function of the forming bias voltage. This bias dependence is demonstrated over a large range, where the creation of a single, double and multiple CFs are shown. In addition, the reset process of the multi CF device is presented, and the experimentally observed, step like, gradual CBRAM reset is verified. The simulated results are in good agreement with experimental data and promote the idea that OV defect engineering may be used to improve CBRAM performance.

  13. Numerical investigation of optimized CZTSSe based solar cell in Wx-Amps environment

    Science.gov (United States)

    Mohanty, Soumya Priyadarshini; Padhy, Srinibasa; Chowdhury, Joy; Sing, Udai P.

    2018-05-01

    The CZTSSe is the modified version of CZTS with selenium infusion. It shows maximum efficiency in the band gap from 1 to 1.4 eV. In our present work CZTSSe based solar cell is investigated using Wx-Amps tool. The Mo layer, absorber layer, CdS layer, i-ZnO [4]and Al-ZnO layers with their electrical, optical and material parameters are fitted in the tool. The vital parameters such as carrier density, thickness of the CZTSSe absorber layer, operating temperature, CdS buffer layer thickness and its carrier density on the cell interpretation are calculated. From[4] the simulation results it is apparent that the optimal absorber layer varies from 2.9 µm to 3.7 µm. The temperature variation has a strong influence on the efficiency of the cell. An optimal efficiency of 22% (With Jsc=33 mA/cm2, Voc=0.98 V, and fill factor= 68%) are attained. These results will give some insight for makeing higher efficiency CZTSSe based solar cell.

  14. Numerical investigation of aerodynamic performance of darrieus wind turbine based on the magnus effect

    Directory of Open Access Journals (Sweden)

    L Khadir

    2016-10-01

    Full Text Available The use of several developmental approaches is the researchers’ major preoccupation with the DARRIEUS wind turbine. This paper presents the first approach and results of a wide computational investigation on the aerodynamics of a vertical axis DARRIEUS wind turbine based on the MAGNUS effect. Consequently, wind tunnel tests were carried out to ascertain overall performance of the turbine and two-dimensional unsteady computational fluid dynamics (CFD models were generated to help understand the aerodynamics of this new performance. Accordingly, a moving mesh technique was used where the geometry of the turbine blade was cylinders. The turbine model was created in Gambit modeling software and then read into fluent software for fluid flow analysis. Flow field characteristics are investigated for several values of tip speed ratio (TSR, in this case we generated a new rotational speed ratio between the turbine and cylinder (δ = ωC/ωT. This new concept based on the MAGNUS approach provides the best configuration for better power coefficient values. The positive results of Cp obtained in this study are used to generate energy; on the other hand, the negative values of Cp could be used in order to supply the engines with energy.

  15. Recent developments in family psychoeducation as an evidence-based practice.

    Science.gov (United States)

    Lucksted, Alicia; McFarlane, William; Downing, Donna; Dixon, Lisa

    2012-01-01

    Among potential resources for people with serious mental illnesses (SMI) and their families, professionally delivered family psychoeducation (FPE) is designed to engage, inform, and educate family members, so that they can assist the person with SMI in managing their illness. In this article, we review research regarding FPE outcomes and implementation since 2001, updating the previous review in this journal (McFarlane, Dixon, Lukens, & Lucksted, Journal of Marital and Family Therapy 2003; 29, 223). Research on a range of FPE variations continues to return mostly positive effects for adults with schizophrenia and increasingly, bipolar disorder. More recent studies include functional outcomes as well as the more common relapse and hospitalization. FPE research involving adults with other diagnoses is increasing, as is FPE research outside the United States In both cases, uneven methodologies and multiple FPE variations make drawing conclusions difficult, although the core utility of access to information, skill building, problem solving, and social support often shines though. Since the previous review, several FPE programs for parents of children or youth with mood disorders have also been developed, with limited research showing more positive than null results. Similarly, we review the developing inquiry into early intervention and FPE, short-form FPE, and cost studies involving FPE. The second half of the article updates the paradox of FPE's evidence base versus its persistently low use, via recent implementation efforts. Multiple challenges and facilitating factors across healthcare systems and financing, individual programs and providers, family members, and consumers shape this issue, and we conclude with discussion of the need for empirical evaluation of implementation strategies and models. © 2011 American Association for Marriage and Family Therapy.

  16. Building a framework for theory-based ethnographies for studying intergenerational family food practices.

    Science.gov (United States)

    Visser, Sanne Siete; Hutter, Inge; Haisma, Hinke

    2016-02-01

    The growing rates of (childhood) obesity worldwide are a source concern for health professionals, policy-makers, and researchers. The increasing prevalence of associated diseases-such as diabetes, cardiovascular diseases, and psychological problems-shows the impact of obesity on people's health, already from a young age. In turn, these problems have obvious consequences for the health care system, including higher costs. However, the treatment of obesity has proven to be difficult, which makes prevention an important goal. In this study, we focus on food practices, one of the determinants of obesity. In recent years, it has become increasingly clear that interventions designed to encourage healthy eating of children and their families are not having the desired impact, especially among groups with a lower socioeconomic background (SEB). To understand why interventions fail to have an impact, we need to study the embedded social and cultural constructions of families. We argue that we need more than just decision-making theories to understand this cultural embeddedness, and to determine what cultural and social factors influence the decision-making process. By allowing families to explain their cultural background, their capabilities, and their opportunities, we will gain new insights into how families choose what they eat from a complex set of food choices. We have thus chosen to build a framework based on Sen's capability approach and the theory of cultural schemas. This framework, together with a holistic ethnographic research approach, can help us better understand what drives the food choices made in families. The framework is built to serve as a starting point for ethnographic research on food choice in families, and could contribute to the development of interventions that are embedded in the cultural realities of the targeted groups. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  17. Design and numerical optimization of a mode multiplexer based on few-mode fiber couplers

    International Nuclear Information System (INIS)

    Xie, Yiwei; Fu, Songnian; Liu, Hai; Zhang, Hailiang; Tang, Ming; Liu, Deming; Shum, P

    2013-01-01

    Mode division multiplexing (MDM) transmission based on few-mode fibers (FMFs) appears to be an alternative solution for overcoming the capacity limit of single-mode fibers (SMFs). A FMF coupler-based mode division multiplexer/demultiplexer (MMUX/DeMMUX) is proposed and theoretically investigated after the fabricated FMF is characterized. MMUXs/DeMMUXs with a mode contrast ratio (MCR) of more than 20 dB can be obtained for two-mode multiplexing and three-mode multiplexing over a wavelength span of 60 and 10 nm, respectively. We numerically verify the proposed MMUX/DeMMUX which has the advantages of high MCR, easy fabrication and maintenance, and low wavelength dependence. (paper)

  18. Family-based childhood obesity prevention interventions: a systematic review and quantitative content analysis.

    Science.gov (United States)

    Ash, Tayla; Agaronov, Alen; Young, Ta'Loria; Aftosmes-Tobio, Alyssa; Davison, Kirsten K

    2017-08-24

    A wide range of interventions has been implemented and tested to prevent obesity in children. Given parents' influence and control over children's energy-balance behaviors, including diet, physical activity, media use, and sleep, family interventions are a key strategy in this effort. The objective of this study was to profile the field of recent family-based childhood obesity prevention interventions by employing systematic review and quantitative content analysis methods to identify gaps in the knowledge base. Using a comprehensive search strategy, we searched the PubMed, PsycIFO, and CINAHL databases to identify eligible interventions aimed at preventing childhood obesity with an active family component published between 2008 and 2015. Characteristics of study design, behavioral domains targeted, and sample demographics were extracted from eligible articles using a comprehensive codebook. More than 90% of the 119 eligible interventions were based in the United States, Europe, or Australia. Most interventions targeted children 2-5 years of age (43%) or 6-10 years of age (35%), with few studies targeting the prenatal period (8%) or children 14-17 years of age (7%). The home (28%), primary health care (27%), and community (33%) were the most common intervention settings. Diet (90%) and physical activity (82%) were more frequently targeted in interventions than media use (55%) and sleep (20%). Only 16% of interventions targeted all four behavioral domains. In addition to studies in developing countries, racial minorities and non-traditional families were also underrepresented. Hispanic/Latino and families of low socioeconomic status were highly represented. The limited number of interventions targeting diverse populations and obesity risk behaviors beyond diet and physical activity inhibit the development of comprehensive, tailored interventions. To ensure a broad evidence base, more interventions implemented in developing countries and targeting racial

  19. Hydraulic performance numerical simulation of high specific speed mixed-flow pump based on quasi three-dimensional hydraulic design method

    International Nuclear Information System (INIS)

    Zhang, Y X; Su, M; Hou, H C; Song, P F

    2013-01-01

    This research adopts the quasi three-dimensional hydraulic design method for the impeller of high specific speed mixed-flow pump to achieve the purpose of verifying the hydraulic design method and improving hydraulic performance. Based on the two families of stream surface theory, the direct problem is completed when the meridional flow field of impeller is obtained by employing iterative calculation to settle the continuity and momentum equation of fluid. The inverse problem is completed by using the meridional flow field calculated in the direct problem. After several iterations of the direct and inverse problem, the shape of impeller and flow field information can be obtained finally when the result of iteration satisfies the convergent criteria. Subsequently the internal flow field of the designed pump are simulated by using RANS equations with RNG k-ε two-equation turbulence model. The static pressure and streamline distributions at the symmetrical cross-section, the vector velocity distribution around blades and the reflux phenomenon are analyzed. The numerical results show that the quasi three-dimensional hydraulic design method for high specific speed mixed-flow pump improves the hydraulic performance and reveal main characteristics of the internal flow of mixed-flow pump as well as provide basis for judging the rationality of the hydraulic design, improvement and optimization of hydraulic model

  20. Comparison between two meshless methods based on collocation technique for the numerical solution of four-species tumor growth model

    Science.gov (United States)

    Dehghan, Mehdi; Mohammadi, Vahid

    2017-03-01

    As is said in [27], the tumor-growth model is the incorporation of nutrient within the mixture as opposed to being modeled with an auxiliary reaction-diffusion equation. The formulation involves systems of highly nonlinear partial differential equations of surface effects through diffuse-interface models [27]. Simulations of this practical model using numerical methods can be applied for evaluating it. The present paper investigates the solution of the tumor growth model with meshless techniques. Meshless methods are applied based on the collocation technique which employ multiquadrics (MQ) radial basis function (RBFs) and generalized moving least squares (GMLS) procedures. The main advantages of these choices come back to the natural behavior of meshless approaches. As well as, a method based on meshless approach can be applied easily for finding the solution of partial differential equations in high-dimension using any distributions of points on regular and irregular domains. The present paper involves a time-dependent system of partial differential equations that describes four-species tumor growth model. To overcome the time variable, two procedures will be used. One of them is a semi-implicit finite difference method based on Crank-Nicolson scheme and another one is based on explicit Runge-Kutta time integration. The first case gives a linear system of algebraic equations which will be solved at each time-step. The second case will be efficient but conditionally stable. The obtained numerical results are reported to confirm the ability of these techniques for solving the two and three-dimensional tumor-growth equations.

  1. Design and evaluation of the computer-based training program Calcularis for enhancing numerical cognition

    Directory of Open Access Journals (Sweden)

    Tanja eKäser

    2013-08-01

    Full Text Available This article presents the design and a first pilot evaluation of the computer-based training program Calcularis for children with developmental dyscalculia (DD or difficulties in learning mathematics. The program has been designed according to insights on the typical and atypical development of mathematical abilities. The learning process is supported through multimodal cues, which encode different properties of numbers. To offer optimal learning conditions, a user model completes the program and allows flexible adaptation to a child’s individual learning and knowledge profile. 32 children with difficulties in learning mathematics completed the 6 to 12-weeks computer training. The children played the game for 20 minutes per day for 5 days a week. The training effects were evaluated using neuropsychological tests. Generally, children benefited significantly from the training regarding number representation and arithmetic operations. Furthermore, children liked to play with the program and reported that the training improved their mathematical abilities.

  2. Scheduling of head-sensitive cascaded hydro systems : a comparison based on numerical simulation results

    Energy Technology Data Exchange (ETDEWEB)

    Catalao, J.P.S.; Mariano, S.J.P.S. [Beira Interior Univ., Covilha (Portugal). Dept. of Electromechanical Engineering; Mendes, V.M.F. [Superior Engineering Inst. of Lisbon, Lisbon (Portugal). Dept. of Electrical Engineering and Automation; Ferreira, L.A.F.M. [Technical Univ. of Lisbon, Superior Technical Inst., Lisbon (Portugal). Dept. of Electrical Engineering and Computers

    2008-07-01

    The electric power sector in Portugal and Spain has shifted from a traditional monopoly to a deregulated, competitive energy market. As such, hydroelectric facilities face the optimal challenge of how to make a profit by managing water resources without compromising future potential profit. As such, hydro scheduling is a key activity for hydroelectric power utilities because of its significant economic impact. It involves the optimal management of water inflows and storage in reservoirs. This paper considered the problem of short-term hydro scheduling, concerning head-sensitive cascaded reservoirs, and the algorithmic aspects of its solution. The authors proposed and compared optimization methods based on dynamic programming, and linear and nonlinear network programming. The comparison revealed a negligible extra computational effort in a realistic cascaded hydro system where the head depended on the stored water volume. 17 refs., 3 tabs., 7 figs.

  3. Experimental and Numerical Studies on Tire Tread Block Friction Characteristics Based on a New Test Device

    Directory of Open Access Journals (Sweden)

    J. Wu

    2014-01-01

    Full Text Available A new device was developed for tire tread block slip friction tests. Then the friction characteristics were investigated under different loads and contact roads. Based on this, a friction model for contact between tire tread block and different road surfaces was developed. A finite element slip friction model of rubber block was developed for studying the tread contact stress, stiffness under different pattern slope angles, and ditch radius. Results indicate that friction coefficient between tread and ice road increases when the temperature decreases; different tread patterns have a certain influence on the friction coefficient; its average difference was less than 10%. Different roads impact the coefficient of friction more significantly; the greater the pattern slope, the greater the radial stiffness.

  4. Wave propagation numerical models in damage detection based on the time domain spectral element method

    International Nuclear Information System (INIS)

    Ostachowicz, W; Kudela, P

    2010-01-01

    A Spectral Element Method is used for wave propagation modelling. A 3D solid spectral element is derived with shape functions based on Lagrange interpolation and Gauss-Lobatto-Legendre points. This approach is applied for displacement approximation suited for fundamental modes of Lamb waves as well as potential distribution in piezoelectric transducers. The novelty is the model geometry extension from flat to curved elements for application in shell-like structures. Exemplary visualisations of waves excited by the piezoelectric transducers in curved shell structure made of aluminium alloy are presented. Simple signal analysis of wave interaction with crack is performed. The crack is modelled by separation of appropriate nodes between elements. An investigation of influence of the crack length on wave propagation signals is performed. Additionally, some aspects of the spectral element method implementation are discussed.

  5. Digital image based numerical micromechanics of geocomposites with application to chemical grouting

    Czech Academy of Sciences Publication Activity Database

    Blaheta, Radim; Kohut, Roman; Kolcun, Alexej; Souček, Kamil; Staš, Lubomír; Vavro, Leona

    2015-01-01

    Roč. 77, July 2015 (2015), s. 77-88 ISSN 1365-1609 R&D Projects: GA ČR(CZ) GA105/09/1830; GA MŠk ED1.1.00/02.0070 Institutional support: RVO:68145535 Keywords : geocomposites * upscaling * digital CT image based FEM * identification of material parameters Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.010, year: 2015 http://ac.els-cdn.com/S1365160915000623/1-s2.0-S1365160915000623-main.pdf?_tid=dbf3fe52-038b-11e5-95ad-00000aacb362&acdnat=1432633673_93d2764901fe77ac271ced952119f1aa

  6. Scheduling of head-sensitive cascaded hydro systems : a comparison based on numerical simulation results

    International Nuclear Information System (INIS)

    Catalao, J.P.S.; Mariano, S.J.P.S.; Mendes, V.M.F.; Ferreira, L.A.F.M.

    2008-01-01

    The electric power sector in Portugal and Spain has shifted from a traditional monopoly to a deregulated, competitive energy market. As such, hydroelectric facilities face the optimal challenge of how to make a profit by managing water resources without compromising future potential profit. As such, hydro scheduling is a key activity for hydroelectric power utilities because of its significant economic impact. It involves the optimal management of water inflows and storage in reservoirs. This paper considered the problem of short-term hydro scheduling, concerning head-sensitive cascaded reservoirs, and the algorithmic aspects of its solution. The authors proposed and compared optimization methods based on dynamic programming, and linear and nonlinear network programming. The comparison revealed a negligible extra computational effort in a realistic cascaded hydro system where the head depended on the stored water volume. 17 refs., 3 tabs., 7 figs

  7. Numerical simulation of polishing U-tube based on solid-liquid two-phase

    Science.gov (United States)

    Li, Jun-ye; Meng, Wen-qing; Wu, Gui-ling; Hu, Jing-lei; Wang, Bao-zuo

    2018-03-01

    As the advanced technology to solve the ultra-precision machining of small hole structure parts and complex cavity parts, the abrasive grain flow processing technology has the characteristics of high efficiency, high quality and low cost. So this technology in many areas of precision machining has an important role. Based on the theory of solid-liquid two-phase flow coupling, a solid-liquid two-phase MIXTURE model is used to simulate the abrasive flow polishing process on the inner surface of U-tube, and the temperature, turbulent viscosity and turbulent dissipation rate in the process of abrasive flow machining of U-tube were compared and analyzed under different inlet pressure. In this paper, the influence of different inlet pressure on the surface quality of the workpiece during abrasive flow machining is studied and discussed, which provides a theoretical basis for the research of abrasive flow machining process.

  8. Genetic algorithm for design and manufacture optimization based on numerical simulations applied to aeronautic composite parts

    International Nuclear Information System (INIS)

    Mouton, S.; Ledoux, Y.; Teissandier, D.; Sebastian, P.

    2010-01-01

    A key challenge for the future is to reduce drastically the human impact on the environment. In the aeronautic field, this challenge aims at optimizing the design of the aircraft to decrease the global mass. This reduction leads to the optimization of every part constitutive of the plane. This operation is even more delicate when the used material is composite material. In this case, it is necessary to find a compromise between the strength, the mass and the manufacturing cost of the component. Due to these different kinds of design constraints it is necessary to assist engineer with decision support system to determine feasible solutions. In this paper, an approach is proposed based on the coupling of the different key characteristics of the design process and on the consideration of the failure risk of the component. The originality of this work is that the manufacturing deviations due to the RTM process are integrated in the simulation of the assembly process. Two kinds of deviations are identified: volume impregnation (injection phase of RTM process) and geometrical deviations (curing and cooling phases). The quantification of these deviations and the related failure risk calculation is based on finite element simulations (Pam RTM registered and Samcef registered softwares). The use of genetic algorithm allows to estimate the impact of the design choices and their consequences on the failure risk of the component. The main focus of the paper is the optimization of tool design. In the framework of decision support systems, the failure risk calculation is used for making the comparison of possible industrialization alternatives. It is proposed to apply this method on a particular part of the airplane structure: a spar unit made of carbon fiber/epoxy composite.

  9. Exact solutions, numerical relativity and gravitational radiation

    International Nuclear Information System (INIS)

    Winicour, J.

    1986-01-01

    In recent years, there has emerged a new use for exact solutions to Einstein's equation as checks on the accuracy of numerical relativity codes. Much has already been written about codes based upon the space-like Cauchy problem. In the case of two Killing vectors, a numerical characteristic initial value formulation based upon two intersecting families of null hypersurfaces has successfully evolved the Schwarzschild and the colliding plane wave vacuum solutions. Here the author discusses, in the context of exact solutions, numerical studies of gravitational radiation based upon the null cone initial value problem. Every stage of progress in the null cone approach has been associated with exact solutions in some sense. He begins by briefly recapping this history. Then he presents two new examples illustrating how exact solutions can be useful

  10. Motivators and Barriers to Participation of Ethnic Minority Families in a Family-Based HIV Prevention Program

    Science.gov (United States)

    Pinto, Rogério M.; McKay, Mary M.; Baptiste, Donna; Bell, Carl C.; Madison-Boyd, Sybil; Paikoff, Roberta; Wilson, Marla; Phillips, Daisy

    2010-01-01

    SUMMARY Involving low-income, ethnic minority families in lengthy HIV prevention programs can be challenging. Understanding the motivators and barriers to involvement may help researchers and practitioners design programs that can be used by populations most at risk for HIV exposure. The present study discusses motivators and barriers to involvement in the Collaborative HIV Prevention and Adolescent Mental Health Project (CHAMP), using data from a sample of 118 families that participated at varying levels in the twelve sessions of the program. Most participants chose motivators that reflect their perceptions of individual and/or family needs (“CHAMP might help me, mine, and other families”), and of characteristics of the program, such as CHAMP staff were friendly, CHAMP was fun. Among barriers to involvement, respondents expressed concerns about confidentiality, and about being judged by program staff. Respondents also reported experiencing many stressful events in their families (e.g., death and violence in the family) that may have been barriers to their involvement. Knowing these motivators and barriers, researchers and practitioners can enhance involvement in HIV prevention programs. PMID:20686648

  11. Family PArtners in Lifestyle Support (PALS): Family-Based Weight Loss for African American Adults with Type 2 Diabetes

    Science.gov (United States)

    Samuel-Hodge, Carmen D.; Holder-Cooper, Judith C.; Gizlice, Ziya; Davis, Gwendolyn; Steele, Sonia P.; Keyserling, Thomas C.; Kumanyika, Shiriki K.; Brantley, Phillip J.; Svetkey, Laura P.

    2016-01-01

    Objective To develop and test a family-centered behavioral weight loss intervention for African American adults with type 2 diabetes. Methods In this randomized trial, dyads consisting of African American adult with overweight or obesity and type 2 diabetes (index participant) paired with a family partner with overweight or obesity, but not diagnosed with diabetes, were assigned in a 2:1 ratio to a 20-week special intervention (SI) or delayed intervention (DI) control group. The primary outcome was weight loss among index participants at 20 weeks follow-up. Results One hundred-eight participants (54 dyads – 36 (SI) and 18 (DI) dyads) were enrolled: 81% females; mean age, 51 years; mean weight,103 kg; and mean BMI, 37 kg/m2. At post-intervention, 96 participants (89%) returned for follow-up measures. Among index participants, mean difference in weight loss between groups was −5.0 kg, pfamily interactions, and dietary, physical activity, and diabetes self-care behaviors. SI family partners also had significant weight loss (−3.9 kg (SI) vs. −1.0 kg (DI) p=0.02). Conclusions A family-centered, behavioral weight loss intervention led to clinically significant short-term weight loss among family dyads. PMID:27911049

  12. Adolescent muscle dysmorphia and family-based treatment: a case report.

    Science.gov (United States)

    Murray, Stuart B; Griffiths, Scott

    2015-04-01

    A growing body of evidence suggests that the prevalence of male body dissatisfaction and muscle dysmorphia is rising. To date, however, there is no published evidence on the efficacy of treatments for muscle dysmorphia. We present the case of a 15-year-old boy who met full diagnostic criteria for muscle dysmorphia, whose symptoms were treated into remission with eating disorder-focused, family-based treatment. The age of this patient fell within the time period in which symptoms of muscle dysmorphia are most likely to develop and this case represents the first published case report of family-based treatment for muscle dysmorphia in this age group. Thus, this case report has important implications for clinicians considering treatment options for presentations of muscle dysmorphia when first presenting in adolescence. Implications for the development of treatment guidelines for muscle dysmorphia and for the diagnostic debate surrounding muscle dysmorphia are also discussed. © The Author(s) 2014.

  13. Family based treatment for children with functional somatic symptoms: A systematic literature review

    DEFF Research Database (Denmark)

    Hulgaard, Ditte Roth; Dehlholm-Lambertsen, Birgitte; Rask, Charlotte

    2015-01-01

    Background: Young patients with Functional Somatic Symptoms (FSS) are common and may present in all clinical settings. Clinical presentation varies from self–limiting to severe and disabling symptoms with impairment in several domains of daily life. In daily clinical practice there is no consensus...... on which treatment to offer children and adolescents with FSS. Research in adults shows that different FSS respond to the same kind of treatment, with the effect of cognitive behavioural therapy being well established. In the understanding of mental health issues in children, it is well established...... is broadly defined and encompasses a wide range of interventions. Aims: As part of a PhD study on family based treatment for children with FSS a systematic review of the literature will be performed in which the type and characteristics of existing family based psychological interventions for children...

  14. [Family-based psychosocial interventions for children with attention deficit hyperactivity disorder (ADHD), oppositional defiant disorder, and conduct disorder].

    Science.gov (United States)

    Vuori, Miika; Tuulio-Henriksson, Annamari; Nissinen, Heidi; Autti-Rämö, Ilona

    2015-01-01

    Psychosocial family-based interventions--family therapy, cognitive-behavioral parent training and family-based treatment protocols--are empirically supported treatments for children with attention deficit hyperactivity disorder (ADHD), oppositional defiant disorder, and conduct disorder. Well-researched interventions such as remote and group-based parent training programs relate to improvements in parenting quality, positive parenting, and the child's decreased ADHD and conduct behavioral problems, whereas individual family-based treatments are sometimes required, depending on symptom severity. Specific family-based treatment protocols are tailored for older children and adolescents with severe behavioral and emotional problems. Considering the above, empirically supported programs are used more in Finland, compared to licensed Anglo-American treatment protocols.

  15. Droplet spreading and capillary imbibition in a porous medium: A coupled IB-VOF method based numerical study

    Science.gov (United States)

    Das, Saurish; Patel, H. V.; Milacic, E.; Deen, N. G.; Kuipers, J. A. M.

    2018-01-01

    We investigate the dynamics of a liquid droplet in contact with a surface of a porous structure by means of the pore-scale level, fully resolved numerical simulations. The geometrical details of the solid porous matrix are resolved by a sharp interface immersed boundary method on a Cartesian computational grid, whereas the motion of the gas-liquid interface is tracked by a mass conservative volume of fluid method. The numerical simulations are performed considering a model porous structure that is approximated by a 3D cubical scaffold with cylindrical struts. The effect of the porosity and the equilibrium contact angle (between the gas-liquid interface and the solid struts) on the spreading behavior, liquid imbibition, and apparent contact angle (between the gas-liquid interface and the porous base) are studied. We also perform several simulations for droplet spreading on a flat surface as a reference case. Gas-liquid systems of the Laplace number, La = 45 and La = 144 × 103 are considered neglecting the effect of gravity. We report the time exponent (n) and pre-factor (C) of the power law describing the evolution of the spreading diameter (S = Ctn) for different equilibrium contact angles and porosity. Our simulations reveal that the apparent or macroscopic contact angle varies linearly with the equilibrium contact angle and increases with porosity. Not necessarily for all the wetting porous structures, a continuous capillary drainage occurs, and we find that the rate of the capillary drainage very much depends on the fluid inertia. At La = 144 × 103, numerically we capture the capillary wave induced pinch-off and daughter droplet ejection. We observe that on the porous structure the pinch-off is weak compared to that on a flat plate.

  16. Numerical Analysis on Temperature Rise of a Concrete Arch Dam after Sealing Based on Measured Data

    Directory of Open Access Journals (Sweden)

    Qingbin Li

    2014-01-01

    Full Text Available The thermal boundary conditions in the construction and operation phases of a concrete arch dam are always complex. After sealing, differences between the arch dam temperature and its sealing temperature can cause compressive or tensile stresses. Based on measured temperature of an arch dam located in China, a temperature rise phenomenon (TRP is found in the after-sealed regions of the arch dam. By mining and analyzing the temperature data of various monitoring apparatus embedded in the arch dam, higher environment temperature is considered to be the main cause for the occurrence of the TRP. Mathematical methods for complex thermal boundary conditions, including external boundary conditions and internal heat source conditions, are proposed in this paper. A finite element model is implemented with the concern of the construction phase and operation phase of the arch dam. Results confirm good agreement with the measured temperature and verify the conjecture that the TRP occurs mainly because the external temperature of the arch dam is higher than its sealing temperature.

  17. Numerical analysis of pulsating heat pipe based on separated flow model

    International Nuclear Information System (INIS)

    Kim, Jong Soo; Im, Yong Bin; Bui, Ngoc Hung

    2005-01-01

    The examination on the operating mechanism of a Pulsating Heat Pipe (PHP) using visualization revealed that the working fluid in the PHP oscillated to the axial direction by the contraction and expansion of vapor plugs. This contraction and expansion is due to the formation and extinction of bubbles in the evaporating and condensing section, respectively. In this paper, a theoretical model of PHP was presented. The theoretical model was based on the separated flow model with two liquid slugs and three vapor plugs. The results show that the diameter, surface tension and charge ratio of working fluid have significant effects on the performance of the PHP. The following conclusions were obtained. The periodic oscillations of liquid slugs and vapor plugs were obtained under specified parameters. When the hydraulic diameter of the PHP was increased to d=3 mm, the frequency of oscillation decreased. By increasing the charging ratio from 40 to 60 by volume ratio, the pressure difference between the evaporating section and condensing section increased, the amplitude of oscillation reduced, and the oscillation frequency decreased. The working fluid with higher surface tension resulted in an increase in the amplitude and frequency of oscillation. Also the average temperature of vapor plugs decreased

  18. A Numerical Study of Water Loss Rate Distributions in MDCT-based Human Airway Models

    Science.gov (United States)

    Wu, Dan; Miyawaki, Shinjiro; Tawhai, Merryn H.; Hoffman, Eric A.; Lin, Ching-Long

    2015-01-01

    Both three-dimensional (3D) and one-dimensional (1D) computational fluid dynamics (CFD) methods are applied to study regional water loss in three multi-detector row computed-tomography (MDCT)-based human airway models at the minute ventilations of 6, 15 and 30 L/min. The overall water losses predicted by both 3D and 1D models in the entire respiratory tract agree with available experimental measurements. However, 3D and 1D models reveal different regional water loss rate distributions due to the 3D secondary flows formed at bifurcations. The secondary flows cause local skewed temperature and humidity distributions on inspiration acting to elevate the local water loss rate; and the secondary flow at the carina tends to distribute more cold air to the lower lobes. As a result, the 3D model predicts that the water loss rate first increases with increasing airway generation, and then decreases as the air approaches saturation, while the 1D model predicts a monotonic decrease of water loss rate with increasing airway generation. Moreover, the 3D (or 1D) model predicts relatively higher water loss rates in lower (or upper) lobes. The regional water loss rate can be related to the non-dimensional wall shear stress (τ*) by the non-dimensional mass transfer coefficient (h0*) as h0* = 1.15 τ*0.272, R = 0.842. PMID:25869455

  19. Numerical Analysis of Copper-Indium-Gallium-Diselenide-Based Solar Cells by SCAPS-1D

    Directory of Open Access Journals (Sweden)

    S. Ouédraogo

    2013-01-01

    Full Text Available We used a one-dimensional simulation program Solar Cell Capacitance Simulator in 1 Dimension (SCAPS-1D to investigate Copper-Indium-Gallium-Diselenide- (CIGS- based solar cells properties. Starting with a conventional ZnO-B/i-ZnO/CdS/CIGS structure, we simulated the parameters of current-voltage characteristics and showed how the absorber layer thickness, hole density, and band gap influence the short-circuit current density (Jsc, open-circuit voltage (Voc, fill factor (FF, and efficiency of solar cell. Our simulation results showed that all electrical parameters are greatly affected by the absorber thickness (w below 1000 nm, due to the increase of back-contact recombination and very poor absorption. Increasing hole density (p or absorber band gap (Eg improves Voc and leads to high efficiency, which equals value of 16.1% when p = 1016 cm−3 and Eg=1.2 eV. In order to reduce back-contact recombination, the effect of a very thin layer with high band gap inserted near the back contact and acting as electrons reflector, the so-called back-electron reflector (EBR, has been investigated. The performances of the solar cells are significantly improved, when ultrathin absorbers (w < 500 nm are used; the corresponding gain of Jsc due to the EBR is 3 mA/cm2. Our results are in good agreement with those reported in the literature from experiments.

  20. Automated numerical simulation of biological pattern formation based on visual feedback simulation framework.

    Science.gov (United States)

    Sun, Mingzhu; Xu, Hui; Zeng, Xingjuan; Zhao, Xin

    2017-01-01

    There are various fantastic biological phenomena in biological pattern formation. Mathematical modeling using reaction-diffusion partial differential equation systems is employed to study the mechanism of pattern formation. However, model parameter selection is both difficult and time consuming. In this paper, a visual feedback simulation framework is proposed to calculate the parameters of a mathematical model automatically based on the basic principle of feedback control. In the simulation framework, the simulation results are visualized, and the image features are extracted as the system feedback. Then, the unknown model parameters are obtained by comparing the image features of the simulation image and the target biological pattern. Considering two typical applications, the visual feedback simulation framework is applied to fulfill pattern formation simulations for vascular mesenchymal cells and lung development. In the simulation framework, the spot, stripe, labyrinthine patterns of vascular mesenchymal cells, the normal branching pattern and the branching pattern lacking side branching for lung branching are obtained in a finite number of iterations. The simulation results indicate that it is easy to achieve the simulation targets, especially when the simulation patterns are sensitive to the model parameters. Moreover, this simulation framework can expand to other types of biological pattern formation.

  1. Assessment of adsorbate density models for numerical simulations of zeolite-based heat storage applications

    International Nuclear Information System (INIS)

    Lehmann, Christoph; Beckert, Steffen; Gläser, Roger; Kolditz, Olaf; Nagel, Thomas

    2017-01-01

    Highlights: • Characteristic curves fit for binderless Zeolite 13XBFK. • Detailed comparison of adsorbate density models for Dubinin’s adsorption theory. • Predicted heat storage densities robust against choice of density model. • Use of simple linear density models sufficient. - Abstract: The study of water sorption in microporous materials is of increasing interest, particularly in the context of heat storage applications. The potential-theory of micropore volume filling pioneered by Polanyi and Dubinin is a useful tool for the description of adsorption equilibria. Based on one single characteristic curve, the system can be extensively characterised in terms of isotherms, isobars, isosteres, enthalpies etc. However, the mathematical description of the adsorbate density’s temperature dependence has a significant impact especially on the estimation of the energetically relevant adsorption enthalpies. Here, we evaluate and compare different models existing in the literature and elucidate those leading to realistic predictions of adsorption enthalpies. This is an important prerequisite for accurate simulations of heat and mass transport ranging from the laboratory scale to the reactor level of the heat store.

  2. Modal Parameter Identification and Numerical Simulation for Self-anchored Suspension Bridges Based on Ambient Vibration

    Science.gov (United States)

    Liu, Bing; Sun, Li Guo

    2018-06-01

    This paper chooses the Nanjing-Hangzhou high speed overbridge, a self-anchored suspension bridge, as the research target, trying to identify the dynamic characteristic parameters of the bridge by using the peak-picking method to analyze the velocity response data under ambient excitation collected by 7 vibration pickup sensors set on the bridge deck. The ABAQUS is used to set up a three-dimensional finite element model for the full bridge and amends the finite element model of the suspension bridge based on the identified modal parameter, and suspender force picked by the PDV100 laser vibrometer. The study shows that the modal parameter can well be identified by analyzing the bridge vibration velocity collected by 7 survey points. The identified modal parameter and measured suspender force can be used as the basis of the amendment of the finite element model of the suspension bridge. The amended model can truthfully reflect the structural physical features and it can also be the benchmark model for the long-term health monitoring and condition assessment of the bridge.

  3. Design and Numerical Study of Micropump Based on Induced Electroosmotic Flow

    Directory of Open Access Journals (Sweden)

    Kai Zhang

    2018-01-01

    Full Text Available Induced charge electroosmotic flow is a new electric driving mode. Based on the Navier–Stokes equations and the Poisson–Nernst–Planck (PNP ion transport equations, the finite volume method is adopted to calculate the equations and boundary conditions of the induced charge electroosmotic flow. In this paper, the formula of the induced zeta potential of the polarized solid surface is proposed, and a UDF program suitable for the simulation of the induced charge electroosmotic is prepared according to this theory. At the same time, on the basis of this theory, a cross micropump driven by induced charge electroosmotic flow is designed, and the voltage, electric potential, charge density, and streamline of the induced electroosmotic micropump are obtained. Studies have shown that when the cross-shaped micropump is energized, in the center of the induction electrode near the formation of a dense electric double layer, there exist four symmetrical vortices at the four corners, and they push the solution towards both outlets; it can be found that the average velocity of the solution in the cross-flow microfluidic pump is nonlinear with the applied electric field, which maybe helpful for the practical application of induced electroosmotic flow in the field of micropump.

  4. Experimental and AI-based numerical modeling of contaminant transport in porous media

    Science.gov (United States)

    Nourani, Vahid; Mousavi, Shahram; Sadikoglu, Fahreddin; Singh, Vijay P.

    2017-10-01

    This study developed a new hybrid artificial intelligence (AI)-meshless approach for modeling contaminant transport in porous media. The key innovation of the proposed approach is that both black box and physically-based models are combined for modeling contaminant transport. The effectiveness of the approach was evaluated using experimental and real world data. Artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) were calibrated to predict temporal contaminant concentrations (CCs), and the effect of noisy and de-noised data on the model performance was evaluated. Then, considering the predicted CCs at test points (TPs, in experimental study) and piezometers (in Myandoab plain) as interior conditions, the multiquadric radial basis function (MQ-RBF), as a meshless approach which solves partial differential equation (PDE) of contaminant transport in porous media, was employed to estimate the CC values at any point within the study area where there was no TP or piezometer. Optimal values of the dispersion coefficient in the advection-dispersion PDE and shape coefficient of MQ-RBF were determined using the imperialist competitive algorithm. In temporal contaminant transport modeling, de-noised data enhanced the performance of ANN and ANFIS methods in terms of the determination coefficient, up to 6 and 5%, respectively, in the experimental study and up to 39 and 18%, respectively, in the field study. Results showed that the efficiency of ANFIS-meshless model was more than ANN-meshless model up to 2 and 13% in the experimental and field studies, respectively.

  5. Numerical analysis of viscous effect on ship rolling motions based on CFD

    Directory of Open Access Journals (Sweden)

    LUO Tian

    2017-03-01

    Full Text Available During the ship design procedure, the analysis of ship rolling motions is of great significance because the rolling motions have extraordinary effects on the sea-keeping, maneuverability and stability of a ship. It is difficult to simulate rolling motions due to the effect of viscosity, which causes many nonlinear components in computation. As such, the potential theory used for other ship motions cannot be used for rolling motions. This paper simulates the rolling motions of the DTMB 5512 ship model and the ship transverse section of the S60 ship model with a naoe-FOAM-SJTU solver using the Reynolds Averaged Navier Stokes(RANSmethod based on the OpenFOAM. The results of rolling motions are compared with the experimental data, which confirms the reliability of the meshes and results. For the ship transverse section of the S60 ship model, the damping coefficient is divided into three parts with the Euler and RANS methods:friction, vorticity and wave parts. For the DTMB 5512 ship model, the damping coefficient is also respectively analyzed, including the friction, vorticity, wave and bilge keel parts. The results in this paper show that the vorticity part accounts for the greatest proportion, while the friction part accounts for the least, and the bilge keels reduces the damping moment to a certain extent which shows the effect of rolling parameters on rolling motions and moments.

  6. Quality of web-based family-building information for LGBTQ individuals.

    Science.gov (United States)

    Kreines, Fabiana M; Farr, Alex; Chervenak, Frank A; Grünebaum, Amos

    2018-02-01

    The number of patients who seek health information on the internet is increasing. Rates are particularly high among lesbian, gay, bisexual, transgender and queer (LGBTQ) individuals, due to health care barriers. The aim of this study was to evaluate the quality and inclusivity of web-based information pertaining to LGBTQ family building. The first 100 US-based websites pertaining to LGBTQ family building were identified through a terminology-based internet search. After eliminating 45 websites, 55 websites were found to be eligible. The 2016 Website Information Reliability Evaluation Instrument (of the Office of Disease Prevention and Health Promotion, US Department of Health and Human Services) was used to analyse the quality of information on each website. Websites were analysed for inclusivity of important topics surrounding LGBTQ family building. A total of 46 websites (83.6%) belonged or were related to reproductive services and served as advertisements for their respective owners; nine websites (16.4%) belonged to third parties. No website met more than four of the six major reliability criteria, and 42 websites (76.4%) met only one or two of the six major reliability criteria. When inclusivity was considered, 29 websites (52.7%) mentioned options for transgender individuals and nine websites (16.4%) mentioned adoption. There is a lack of reliable web-based information for LGBTQ family building and a need for improvement in quality and scope. Improvements could lead to a shift in reproductive health care towards better inclusion of and catering to LGBTQ individuals.

  7. Family Involvement as a Priority Element for an Educational Action Based on Dialogic Learning

    Science.gov (United States)

    Valls, Mercè Pañellas; de Nicolás, Montserrat Alguacil; Torremorell, Maria Carme Boqué

    In our society, there is a need for a critical reflection on education and the tasks to be developed by every agent. The family and school are the two main socializing settings of children and adolescents and, therefore, their joint responsibility in their education is a commitment that should be established in an atmosphere of confidence and harmony in order to tend towards a learning community model based on dialogic learning.

  8. Profiling Fast Healthcare Interoperability Resources (FHIR) of Family Health History based on the Clinical Element Models

    OpenAIRE

    Lee, Jaehoon; Hulse, Nathan C.; Wood, Grant M.; Oniki, Thomas A.; Huff, Stanley M.

    2017-01-01

    In this study we developed a Fast Healthcare Interoperability Resources (FHIR) profile to support exchanging a full pedigree based family health history (FHH) information across multiple systems and applications used by clinicians, patients, and researchers. We used previously developed clinical element models (CEMs) that are capable of representing the FHH information, and derived essential data elements including attributes, constraints, and value sets. We analyzed gaps between the FHH CEM ...

  9. Work-family conflict, emotional exhaustion and performance-based self-esteem: reciprocal relationships.

    Science.gov (United States)

    Richter, Anne; Schraml, Karin; Leineweber, Constanze

    2015-01-01

    The three constructs of work-family conflict, emotional exhaustion and performance-based self-esteem are all related to tremendous negative consequences for the individual, the organization as well as for society. Even though there are studies that connect two of those constructs, the prospective relations between all three of them have not been studied yet. We explored the prospective relations between the three constructs in a large Swedish data set representative of the Swedish workforce. Gender differences in the relations were investigated. Longitudinal data with a 2-year time lag were gathered from 3,387 working men and women who responded to the 2006 and 2008 waves of the Swedish Longitudinal Occupational Survey of Health. Four different cross-lagged models were analysed. In the best fitting model, higher levels of work-family conflict at time 1 were associated with an increased level of performance-based self-esteem at time 2, but not with emotional exhaustion, after controlling for having children, gender, education and age. Also, relationships between emotional exhaustion at time 1 and work-family conflict and performance-based self-esteem at time 2 could be established. Furthermore, relationships between performance-based self-esteem time 1 and work-family conflict and emotional exhaustion time 2 were found. Multiple-group analysis did not show any differences in the relations of the tested constructs over time for either men or women. We conclude that the three constructs are interrelated and best understood through a reciprocal model. No differences were found between men and women.

  10. Family Aggregation and Heritability of ESRD in Taiwan: A Population-Based Study.

    Science.gov (United States)

    Wu, Hsin Hsu; Kuo, Chang Fu; Li, I Jung; Weng, Cheng Hao; Lee, Cheng Chia; Tu, Kun Hua; Liu, Shou Hsuan; Chen, Yung Chang; Yang, Chih Wei; Luo, Shue Fen; See, Lai Chu; Yu, Kuang Hui; Huang, Lu Hsiang; Zhang, Weiya; Doherty, Michael; Tian, Ya Chung

    2017-11-01

    Aggregation of end-stage renal disease (ESRD) has been observed in families of European origin, as well as those of African origin. However, it is not well documented if this disease aggregates in Asian families. Furthermore, the contribution of genetic factors and shared environmental factors to family aggregation remains unclear. Population-based cross-sectional cohort study. All 23,422,955 individuals registered in the Taiwan National Health Insurance Research Database in 2013. Among these, 47.45%, 57.45%, 47.29%, and 1.51% had a known parent, child, sibling, or twin, respectively. We identified 87,849 patients who had a diagnosis of ESRD. Family history of ESRD. ESRD and heritability defined as the proportion of phenotypic variance attributable to genetic factors. Having an affected first-degree relative with ESRD was associated with an adjusted relative risk of 2.46 (95% CI, 2.32-2.62). Relative risks were 96.38 (95% CI, 48.3-192.34) for twins of patients with ESRD, 2.15 (95% CI, 2.02-2.29) for parents, 2.78 (95% CI, 2.53-3.05) for offspring, 4.96 (95% CI, 4.19-5.88) for siblings, and 1.66 (95% CI, 1.54-1.78) for spouses without genetic similarities. Heritability in this study was 31.1% to 11.4% for shared environmental factors and 57.5% for nonshared environmental factors. This was a registry database study and we did not have detailed information about clinical findings or the definite causes of ESRD. This whole population-based family study in Asia confirmed, in a Taiwanese population, that a family history of ESRD is a strong risk factor for this disease. Moderate heritability was noted and environmental factors were related to disease. Family history of ESRD is an important piece of clinical information. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  11. Effect of Grain Boundaries on the Performance of Thin-Film-Based Polycrystalline Silicon Solar Cells: A Numerical Modeling

    Science.gov (United States)

    Chhetri, Nikita; Chatterjee, Somenath

    2018-01-01

    Solar cells/photovoltaic, a renewable energy source, is appraised to be the most effective alternative to the conventional electrical energy generator. A cost-effective alternative of crystalline wafer-based solar cell is thin-film polycrystalline-based solar cell. This paper reports the numerical analysis of dependency of the solar cell parameters (i.e., efficiency, fill factor, open-circuit voltage and short-circuit current density) on grain size for thin-film-based polycrystalline silicon (Si) solar cells. A minority carrier lifetime model is proposed to do a correlation between the grains, grain boundaries and lifetime for thin-film-based polycrystalline Si solar cells in MATLAB environment. As observed, the increment in the grain size diameter results in increase in minority carrier lifetime in polycrystalline Si thin film. A non-equivalent series resistance double-diode model is used to find the dark as well as light (AM1.5) current-voltage (I-V) characteristics for thin-film-based polycrystalline Si solar cells. To optimize the effectiveness of the proposed model, a successive approximation method is used and the corresponding fitting parameters are obtained. The model is validated with the experimentally obtained results reported elsewhere. The experimentally reported solar cell parameters can be found using the proposed model described here.

  12. Experimental and numerical investigations of Si-based photonic crystals with ordered Ge quantum dots emitters

    International Nuclear Information System (INIS)

    Jannesari, R.

    2014-01-01

    In recent years quasi-two-dimensional (2D) photonic crystals, also known as photonic crystal slabs, have been the subject of extensive research. The present work is based on photonic crystals where a hexagonal 2D lattice of air holes is etched through a silicon-on-insulator (SOI) slab. Light is guided in the horizontal plane using photonic band-gap properties, and index guiding provides the optical confinement in the third dimension. This work discusses photonic crystal slabs with Ge quantum dots (QDs) as internal sources. Ge quantum dots have luminescence around 1500nm, which is well suited for optical fiber communication in a way that is fully compatible with standard silicon technology. QD emission can be controlled by epitaxial growth on a pre-patterned SOI substrate. In this way the position of the QDs is controlled, as well as their homogeneity and spectral emission range. During this thesis, photonic crystal fabrication techniques together with techniques for the alignment of the photonic crystal holes with the QDs positions were developed. The employed techniques involve electron beam lithography (EBL) and inductively-coupled-plasma reactive ion etching (ICP-RIE). Perfect ordering of the QDs position was achieved by employing these techniques for pit patterning and the subsequent growth of Ge dots using molecular beam epitaxy (MBE). A second EBL step was then used for photonic crystal writing, which needed to be aligned with respect to the pit pattern with a precision of about ± 30nm. Micro-photoluminescence spectroscopy was used for the optical characterization of the photonic crystal. The emission from ordered quantum dots in different symmetry positions within a unit cell of photonic crystal was theoretically and experimentally investigated and compared with randomly distributed ones. Besides, different geometrical parameters of photonic crystals were studied. The theoretical investigations were mainly based on the rigorous coupled wave analysis (RCWA

  13. Numerical simulation of countercurrent flow based on two-fluid model

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H.D. [Institute of Nuclear Engineering and Technology, Sun Yat-sen University, Zhuhai 519082 (China); School of Electric Power, South China University of Technology, Guangzhou 510640 (China); Zhang, X.Y., E-mail: zxiaoying@mail.sysu.edu.cn [Institute of Nuclear Engineering and Technology, Sun Yat-sen University, Zhuhai 519082 (China)

    2017-03-15

    Highlights: • Using one-dimensional two-fluid model to help understanding counter-current flow two-phase flows. • Using surface tension model to make the one-dimensional two-fluid flow model well-posed. • Solving the governing equations with a modified SIMPLE algorithm. • Validating code with experimental data and applying it to vertical air/steam countercurrent flow condition - Abstract: In order to improve the understanding of counter-current two-phase flows, a transient analysis code is developed based on one-dimensional two-fluid model. A six equation model has been established and a two phase pressure model with surface tension term, wall drag force and interface shear terms have been used. Taking account of transport phenomenon, heat and mass transfer models of interface were incorporated. The staggered grids have been used in discretization of equations. For validation of the model and code, a countercurrent air-water problem in one experimental horizontal stratified flow has been considered firstly. Comparison of the computed results and the experimental one shows satisfactory agreement. As the full problem for investigation, one vertical pipe with countercurrent flow of steam-water and air-water at same boundary condition has been taken for study. The transient distribution of liquid fraction, liquid velocity and gas velocity for selected positions of steam-water and air-water problem were presented and discussed. The results show that these two simulations have similar transient behavior except that the distribution of gas velocity for steam-water problem have larger oscillation than the one for air-water. The effect of mesh size on wavy characteristics of interface surface was also investigated. The mesh size has significant influence on the simulated results. With the increased refinement, the oscillation gets stronger.

  14. Medical Students' Knowledge of Fertility Awareness-Based Methods of Family Planning.

    Science.gov (United States)

    Danis, Peter G; Kurz, Sally A; Covert, Laura M

    2017-01-01

    Traditional medical school curricula have not addressed fertility awareness-based methods (FABMs) of family planning. The objective of this study was to assess (1) 3-year medical students' knowledge of FABMs of family planning, (2) their confidence in utilizing that knowledge in patient care, and (3) to implement focused education on FABMs to improve knowledge and confidence. Third-year medical students at one institution in the United States were given a 10-question assessment at the beginning of their OB-GYN rotation. Two lectures about FABMs and their clinical applications were given during the rotation. Students were given the same questions at the end of the rotation. Each questionnaire consisted of eight questions to assess a student's knowledge of FABMs and two questions to assess the student's confidence in sharing and utilizing that information in a clinical setting. McNemar's test was used to analyze the data. Two hundred seventy-seven students completed a pretest questionnaire and 196 students completed the posttest questionnaire. Medical knowledge improved from an initial test score of 38.99% to final test score of 53.57% ( p  Medical schools may not include FABMs in OB-GYN curriculum; however, to patients, these methods remain a sought after and valid form of family planning. This study shows that brief, focused education can increase medical students' knowledge of and confidence with FABMs of family planning.

  15. UUCD: a family-based database of ubiquitin and ubiquitin-like conjugation.

    Science.gov (United States)

    Gao, Tianshun; Liu, Zexian; Wang, Yongbo; Cheng, Han; Yang, Qing; Guo, Anyuan; Ren, Jian; Xue, Yu

    2013-01-01

    In this work, we developed a family-based database of UUCD (http://uucd.biocuckoo.org) for ubiquitin and ubiquitin-like conjugation, which is one of the most important post-translational modifications responsible for regulating a variety of cellular processes, through a similar E1 (ubiquitin-activating enzyme)-E2 (ubiquitin-conjugating enzyme)-E3 (ubiquitin-protein ligase) enzyme thioester cascade. Although extensive experimental efforts have been taken, an integrative data resource is still not available. From the scientific literature, 26 E1s, 105 E2s, 1003 E3s and 148 deubiquitination enzymes (DUBs) were collected and classified into 1, 3, 19 and 7 families, respectively. To computationally characterize potential enzymes in eukaryotes, we constructed 1, 1, 15 and 6 hidden Markov model (HMM) profiles for E1s, E2s, E3s and DUBs at the family level, separately. Moreover, the ortholog searches were conducted for E3 and DUB families without HMM profiles. Then the UUCD database was developed with 738 E1s, 2937 E2s, 46 631 E3s and 6647 DUBs of 70 eukaryotic species. The detailed annotations and classifications were also provided. The online service of UUCD was implemented in PHP + MySQL + JavaScript + Perl.

  16. Spatio-Temporal Dynamic Analysis of Sustainable Development in China Based on the Footprint Family

    Science.gov (United States)

    Ma, Caihong; Zhao, Xiangui; Wang, Xiaoyu

    2018-01-01

    The existing index systems on sustainable evaluation are mostly based on a multi index comprehensive evaluation method. The main disadvantage of this approach is that the selection and assignment of evaluation indexes are greatly influenced by subjective factors, which can result in poor comparability of results. By contrast, the Footprint Family (including ecological footprint, carbon footprint, and water footprint) is not affected by subjective factors. The Footprint Family also covers the basic tenets of sustainable development. This paper proposes use of a sustainable development evaluation index system based on the principle of the Footprint Family, and including the ecological pressure index (EPI), the ecological occupancy index (EOI), the ecological economic coordination index (EECI), the GHG (Greenhouse Gas) emission index (CEI), the water resources stress index (WSI), and the sustainable development index (SDI). Furthermore, a standard for grading the evaluated results based on global benchmarks is formulated. The results of an empirical study in China were the following. The development situation deteriorated from 1990 to 2015. The results showed that the SDI decreased from a medium level (grade 5) to a lower-medium level (grade 4). The results of this empirical study also showed that the method of evaluation can avoid the influence of subjective factors and can be used in the evaluation of sustainable development for various temporal and spatial conditions. PMID:29389886

  17. Spatio-Temporal Dynamic Analysis of Sustainable Development in China Based on the Footprint Family.

    Science.gov (United States)

    Zhao, Jing; Ma, Caihong; Zhao, Xiangui; Wang, Xiaoyu

    2018-02-01

    The existing index systems on sustainable evaluation are mostly based on a multi index comprehensive evaluation method. The main disadvantage of this approach is that the selection and assignment of evaluation indexes are greatly influenced by subjective factors, which can result in poor comparability of results. By contrast, the Footprint Family (including ecological footprint, carbon footprint, and water footprint) is not affected by subjective factors. The Footprint Family also covers the basic tenets of sustainable development. This paper proposes use of a sustainable development evaluation index system based on the principle of the Footprint Family, and including the ecological pressure index ( EPI ), the ecological occupancy index ( EOI ), the ecological economic coordination index ( EECI ), the GHG (Greenhouse Gas) emission index ( CEI ), the water resources stress index ( WSI ), and the sustainable development index ( SDI ). Furthermore, a standard for grading the evaluated results based on global benchmarks is formulated. The results of an empirical study in China were the following. The development situation deteriorated from 1990 to 2015. The results showed that the SDI decreased from a medium level (grade 5) to a lower-medium level (grade 4). The results of this empirical study also showed that the method of evaluation can avoid the influence of subjective factors and can be used in the evaluation of sustainable development for various temporal and spatial conditions.

  18. Numerical simulation of ammonium dinitramide (ADN)-based non-toxic aerospace propellant decomposition and combustion in a monopropellant thruster

    International Nuclear Information System (INIS)

    Zhang, Tao; Li, Guoxiu; Yu, Yusong; Sun, Zuoyu; Wang, Meng; Chen, Jun

    2014-01-01

    Highlights: • Decomposition and combustion process of ADN-based thruster are studied. • Distribution of droplets is obtained during the process of spray hit on wire mesh. • Two temperature models are adopted to describe the heat transfer in porous media. • The influences brought by different mass flux and porosity are studied. - Abstract: Ammonium dinitramide (ADN) monopropellant is currently the most promising among all ‘green propellants’. In this paper, the decomposition and combustion process of liquid ADN-based ternary mixtures for propulsion are numerically studied. The R–R distribution model is used to study the initial boundary conditions of droplet distribution resulting from spray hit on a wire mesh based on PDA experiment. To simulate the heat-transfer characteristics between the gas–solid phases, a two-temperature porous medium model in a catalytic bed is used. An 11-species and 7-reactions chemistry model is used to study the catalytic and combustion processes. The final distribution of temperature, pressure, and other kinds of material component concentrations are obtained using the ADN thruster. The results of simulation conducted in the present study are well agree with previous experimental data, and the demonstration of the ADN thruster confirms that a good steady-state operation is achieved. The effects of spray inlet mass flux and porosity on monopropellant thruster performance are analyzed. The numerical results further show that a larger inlet mass flux results in better thruster performance and a catalytic bed porosity value of 0.5 can exhibit the best thruster performance. These findings can serve as a key reference for designing and testing non-toxic aerospace monopropellant thrusters

  19. Quantitative assessment of key parameters in qualitative vulnerability methods applied in karst systems based on an integrated numerical modelling approach

    Science.gov (United States)

    Doummar, Joanna; Kassem, Assaad

    2017-04-01

    In the framework of a three-year PEER (USAID/NSF) funded project, flow in a Karst system in Lebanon (Assal) dominated by snow and semi arid conditions was simulated and successfully calibrated using an integrated numerical model (MIKE-She 2016) based on high resolution input data and detailed catchment characterization. Point source infiltration and fast flow pathways were simulated by a bypass function and a high conductive lens respectively. The approach consisted of identifying all the factors used in qualitative vulnerability methods (COP, EPIK, PI, DRASTIC, GOD) applied in karst systems and to assess their influence on recharge signals in the different hydrological karst compartments (Atmosphere, Unsaturated zone and Saturated zone) based on the integrated numerical model. These parameters are usually attributed different weights according to their estimated impact on Groundwater vulnerability. The aim of this work is to quantify the importance of each of these parameters and outline parameters that are not accounted for in standard methods, but that might play a role in the vulnerability of a system. The spatial distribution of the detailed evapotranspiration, infiltration, and recharge signals from atmosphere to unsaturated zone to saturated zone was compared and contrasted among different surface settings and under varying flow conditions (e.g., in varying slopes, land cover, precipitation intensity, and soil properties as well point source infiltration). Furthermore a sensitivity analysis of individual or coupled major parameters allows quantifying their impact on recharge and indirectly on vulnerability. The preliminary analysis yields a new methodology that accounts for most of the factors influencing vulnerability while refining the weights attributed to each one of them, based on a quantitative approach.

  20. A multiscale MD-FE model of diffusion in composite media with internal surface interaction based on numerical homogenization procedure.

    Science.gov (United States)

    Kojic, M; Milosevic, M; Kojic, N; Kim, K; Ferrari, M; Ziemys, A

    2014-02-01

    Mass transport by diffusion within composite materials may depend not only on internal microstructural geometry, but also on the chemical interactions between the transported substance and the material of the microstructure. Retrospectively, there is a gap in methods and theory to connect material microstructure properties with macroscale continuum diffusion characteristics. Here we present a new hierarchical multiscale model for diffusion within composite materials that couples material microstructural geometry and interactions between diffusing particles and the material matrix. This model, which bridges molecular dynamics (MD) and the finite element (FE) method, is employed to construct a continuum diffusion model based on a novel numerical homogenization procedure. The procedure is general and robust for evaluating constitutive material parameters of the continuum model. These parameters include the traditional bulk diffusion coefficients and, additionally, the distances from the solid surface accounting for surface interaction effects. We implemented our models to glucose diffusion through the following two geometrical/material configurations: tightly packed silica nanospheres, and a complex fibrous structure surrounding nanospheres. Then, rhodamine 6G diffusion analysis through an aga-rose gel network was performed, followed by a model validation using our experimental results. The microstructural model, numerical homogenization and continuum model offer a new platform for modeling and predicting mass diffusion through complex biological environment and within composite materials that are used in a wide range of applications, like drug delivery and nanoporous catalysts.

  1. A multiscale MD–FE model of diffusion in composite media with internal surface interaction based on numerical homogenization procedure

    Science.gov (United States)

    Kojic, M.; Milosevic, M.; Kojic, N.; Kim, K.; Ferrari, M.; Ziemys, A.

    2014-01-01

    Mass transport by diffusion within composite materials may depend not only on internal microstructural geometry, but also on the chemical interactions between the transported substance and the material of the microstructure. Retrospectively, there is a gap in methods and theory to connect material microstructure properties with macroscale continuum diffusion characteristics. Here we present a new hierarchical multiscale model for diffusion within composite materials that couples material microstructural geometry and interactions between diffusing particles and the material matrix. This model, which bridges molecular dynamics (MD) and the finite element (FE) method, is employed to construct a continuum diffusion model based on a novel numerical homogenization procedure. The procedure is general and robust for evaluating constitutive material parameters of the continuum model. These parameters include the traditional bulk diffusion coefficients and, additionally, the distances from the solid surface accounting for surface interaction effects. We implemented our models to glucose diffusion through the following two geometrical/material configurations: tightly packed silica nanospheres, and a complex fibrous structure surrounding nanospheres. Then, rhodamine 6G diffusion analysis through an aga-rose gel network was performed, followed by a model validation using our experimental results. The microstructural model, numerical homogenization and continuum model offer a new platform for modeling and predicting mass diffusion through complex biological environment and within composite materials that are used in a wide range of applications, like drug delivery and nanoporous catalysts. PMID:24578582

  2. A numerically research on energy loss evaluation in a centrifugal pump system based on local entropy production method

    Directory of Open Access Journals (Sweden)

    Hou Hucan

    2017-01-01

    Full Text Available Inspired by wide application of the second law of thermodynamics to flow and heat transfer devices, local entropy production analysis method was creatively introduced into energy assessment system of centrifugal water pump. Based on Reynolds stress turbulent model and energy equation model, the steady numerical simulation of the whole flow passage of one IS centrifugal pump was carried out. The local entropy production terms were calculated by user defined functions, mainly including wall entropy production, turbulent entropy production, and viscous entropy production. The numerical results indicated that the irreversible energy loss calculated by the local entropy production method agreed well with that calculated by the traditional method but with some deviations which were probably caused by high rotatability and high curvature of impeller and volute. The wall entropy production and turbulent entropy production took up large part of the whole entropy production about 48.61% and 47.91%, respectively, which indicated that wall friction and turbulent fluctuation were the major factors in affecting irreversible energy loss. Meanwhile, the entropy production rate distribution was discussed and compared with turbulent kinetic energy dissipation rate distribution, it showed that turbulent entropy production rate increased sharply at the near wall regions and both distributed more uniformly. The blade region in leading edge near suction side, trailing edge and volute tongue were the main regions to generate irreversible exergy loss. This research broadens a completely new view in evaluating energy loss and further optimizes pump using entropy production minimization.

  3. Numerical simulation of the heat extraction in EGS with thermal-hydraulic-mechanical coupling method based on discrete fractures model

    International Nuclear Information System (INIS)

    Sun, Zhi-xue; Zhang, Xu; Xu, Yi; Yao, Jun; Wang, Hao-xuan; Lv, Shuhuan; Sun, Zhi-lei; Huang, Yong; Cai, Ming-yu; Huang, Xiaoxue

    2017-01-01

    The Enhanced Geothermal System (EGS) creates an artificial geothermal reservoir by hydraulic fracturing which allows heat transmission through the fractures by the circulating fluids as they extract heat from Hot Dry Rock (HDR). The technique involves complex thermal–hydraulic–mechanical (THM) coupling process. A numerical approach is presented in this paper to simulate and analyze the heat extraction process in EGS. The reservoir is regarded as fractured porous media consisting of rock matrix blocks and discrete fracture networks. Based on thermal non-equilibrium theory, the mathematical model of THM coupling process in fractured rock mass is used. The proposed model is validated by comparing it with several analytical solutions. An EGS case from Cooper Basin, Australia is simulated with 2D stochastically generated fracture model to study the characteristics of fluid flow, heat transfer and mechanical response in geothermal reservoir. The main parameters controlling the outlet temperature of EGS are also studied by sensitivity analysis. The results shows the significance of taking into account the THM coupling effects when investigating the efficiency and performance of EGS. - Highlights: • EGS reservoir comprising discrete fracture networks and matrix rock is modeled. • A THM coupling model is proposed for simulating the heat extraction in EGS. • The numerical model is validated by comparing with several analytical solutions. • A case study is presented for understanding the main characteristics of EGS. • The THM coupling effects are shown to be significant factors to EGS's running performance.

  4. Estimation of Dynamic Friction Process of the Akatani Landslide Based on the Waveform Inversion and Numerical Simulation

    Science.gov (United States)

    Yamada, M.; Mangeney, A.; Moretti, L.; Matsushi, Y.

    2014-12-01

    Understanding physical parameters, such as frictional coefficients, velocity change, and dynamic history, is important issue for assessing and managing the risks posed by deep-seated catastrophic landslides. Previously, landslide motion has been inferred qualitatively from topographic changes caused by the event, and occasionally from eyewitness reports. However, these conventional approaches are unable to evaluate source processes and dynamic parameters. In this study, we use broadband seismic recordings to trace the dynamic process of the deep-seated Akatani landslide that occurred on the Kii Peninsula, Japan, which is one of the best recorded large slope failures. Based on the previous results of waveform inversions and precise topographic surveys done before and after the event, we applied numerical simulations using the SHALTOP numerical model (Mangeney et al., 2007). This model describes homogeneous continuous granular flows on a 3D topography based on a depth averaged thin layer approximation. We assume a Coulomb's friction law with a constant friction coefficient, i. e. the friction is independent of the sliding velocity. We varied the friction coefficients in the simulation so that the resulting force acting on the surface agrees with the single force estimated from the seismic waveform inversion. Figure shows the force history of the east-west components after the band-pass filtering between 10-100 seconds. The force history of the simulation with frictional coefficient 0.27 (thin red line) the best agrees with the result of seismic waveform inversion (thick gray line). Although the amplitude is slightly different, phases are coherent for the main three pulses. This is an evidence that the point-source approximation works reasonably well for this particular event. The friction coefficient during the sliding was estimated to be 0.38 based on the seismic waveform inversion performed by the previous study and on the sliding block model (Yamada et al., 2013

  5. Prostate cancer risk prediction based on complete prostate cancer family history.

    Science.gov (United States)

    Albright, Frederick; Stephenson, Robert A; Agarwal, Neeraj; Teerlink, Craig C; Lowrance, William T; Farnham, James M; Albright, Lisa A Cannon

    2015-03-01

    Prostate cancer (PC) relative risks (RRs) are typically estimated based on status of close relatives or presence of any affected relatives. This study provides RR estimates using extensive and specific PC family history. A retrospective population-based study was undertaken to estimate RRs for PC based on complete family history of PC. A total of 635,443 males, all with ancestral genealogy data, were analyzed. RRs for PC were determined based upon PC rates estimated from males with no PC family history (without PC in first, second, or third degree relatives). RRs were determined for a variety of constellations, for example, number of first through third degree relatives; named (grandfather, father, uncle, cousins, brothers); maternal, paternal relationships, and age of onset. In the 635,443 males analyzed, 18,105 had PC. First-degree RRs ranged from 2.46 (=1 first-degree relative affected, CI = 2.39-2.53) to 7.65 (=4 first-degree relatives affected, CI = 6.28-9.23). Second-degree RRs for probands with 0 affected first-degree relatives ranged from 1.51 (≥1 second-degree relative affected, CI = 1.47-1.56) to 3.09 (≥5 second-degree relatives affected, CI = 2.32-4.03). Third-degree RRs with 0 affected first- and 0 affected second-degree relatives ranged from 1.15 (≥1 affected third-degree relative, CI = 1.12-1.19) to 1.50 (≥5 affected third-degree relatives, CI = 1.35-1.66). RRs based on age at diagnosis were higher for earlier age at diagnoses; for example, RR = 5.54 for ≥1 first-degree relative diagnosed before age 50 years (CI = 1.12-1.19) and RR = 1.78 for >1 second-degree relative diagnosed before age 50 years, CI = 1.33, 2.33. RRs for equivalent maternal versus paternal family history were not significantly different. A more complete PC family history using close and distant relatives and age at diagnosis results in a wider range of estimates of individual RR that are potentially more accurate than RRs estimated

  6. Effect of occurrence of vitiligo in children over quality of life of their families: A hospital-based study using family dermatology life quality index

    Directory of Open Access Journals (Sweden)

    Pratik Gahalaut

    2018-01-01

    Full Text Available Introduction: Vitiligo in an adult patient has a profound effect on the quality of life (QoL of that particular patient. Although it is known that vitiligo in adult patient affects QoL in their family, very little information is available regarding QoL in a family having children suffering from vitiligo. Materials and Methods: This is a cross-sectional, hospital-based study to ascertain the effect children suffering from vitiligo have on the QoL of their respective families. Study participants were fifty healthy parent/immediate caregivers of fifty corresponding children suffering from vitiligo. The QoL in the family of these vitiliginous children was assessed with the help of Family Dermatology Life Quality Index (FDLQI. Results: There was significantly more impairment of FDLQI among respondents if vitiliginous child was female compared to male. The total FDLQI showed a significant negative correlation with duration of vitiligo in children. Analysis of individual items in FDLQI revealed emotional distress as the most impaired facet of FDLQI and housework as the least affected item. Conclusion: Presence of vitiligo in children affects the QoL of that particular child and his/her family. This impairment of FDLQI is more if the child suffering from vitiligo is female. Treatment of vitiligo in pediatric age group should include psychological counseling and support for the child as well as their parents/caregivers.

  7. Web-based family intervention for overweight children: a pilot study.

    Science.gov (United States)

    Delamater, Alan M; Pulgaron, Elizabeth R; Rarback, Sheah; Hernandez, Jennifer; Carrillo, Adriana; Christiansen, Steven; Severson, Herbert H

    2013-02-01

    Research has shown the efficacy of family-based behavioral interventions for overweight children, but a major difficulty is access to effective treatment programs. The objective of this study was to develop and test the initial feasibility and efficacy of a web-based family program for overweight 8- to 12-year-old children. A website was created using concepts from effective family-based behavioral programs and input from focus groups with overweight children, parents, and pediatricians. The website provided information about obesity and healthy lifestyles, assessment of dietary and physical activity habits, interactive dietary and physical activity games, and instruction in goal-setting and monitoring of goals. Children selected a dietary and physical activity goal and a daily step goal with pedometers. Feasibility and pilot testing over 4 weeks was conducted with 24 overweight children referred by a physician. Outcomes were z-BMI, healthy eating and physical activity, and intrinsic motivation and self-efficacy for weight control. Mean number of logins over the study period was 11.4 for the study sample. Eighteen families (75%) returned for the follow-up assessment. Pre-post analyses for these participants showed improvements in intrinsic motivation, (p=0.05), self-efficacy (p=0.025), physical activity (p=0.005), and healthy lifestyle behaviors (p=0.001). Comparisons between high and low users of the program indicated that high users reduced their BMI while low users increased their BMI over time (p=0.02); high users also improved their dietary intake relative to low users (p=0.04). Consumer satisfaction ratings were high. These pilot findings suggest this is a feasible approach for treatment of overweight children and that children who used the web program frequently improved their BMI and dietary intake.

  8. Numerical Development

    Science.gov (United States)

    Siegler, Robert S.; Braithwaite, David W.

    2016-01-01

    In this review, we attempt to integrate two crucial aspects of numerical development: learning the magnitudes of individual numbers and learning arithmetic. Numerical magnitude development involves gaining increasingly precise knowledge of increasing ranges and types of numbers: from non-symbolic to small symbolic numbers, from smaller to larger…

  9. Comparing the Substance-Dependents’ Profile of the Family Environment with Ordinary Persons for Providing Family Base Intervention

    Directory of Open Access Journals (Sweden)

    F NavabiNejad

    2014-12-01

    Full Text Available Objective: This study was conducted to compare the environment of families with and without substance-dependent members to investigatethe functioning of families with substance-dependent members and also provide them with appropriate treatment strategies. Method: A causative-comparative method followed by an ex post facto design was used in this study. A sample of 50-person suffering from substance-dependent disorder referring to outpatient treatment centers, located in west and east of Tehran, constituted the participants of the study. As well, another 50-person group not suffering from the disorder participated in this study as the former group’s counterpart. The participants answered the questions of environment of family scale (EFS (Moos & Moos, 1986. Findings: The results showed that there was a significant difference between two groups in dimensions of cohesion, conflict, achievement orientation, intellectual-cultural orientation, religious orientation, organization, and control whereas therewas no significant difference between the two groups in dimension of expressiveness, independency, and recreational orientation. Conclusion: The study recommendsthe authorities the application of efficient interventionist treatment strategies appropriate to the characteristics of families having drug-dependent member.

  10. A comparison between rate-and-state friction and microphysical models, based on numerical simulations of fault slip

    Science.gov (United States)

    van den Ende, M. P. A.; Chen, J.; Ampuero, J.-P.; Niemeijer, A. R.

    2018-05-01

    Rate-and-state friction (RSF) is commonly used for the characterisation of laboratory friction experiments, such as velocity-step tests. However, the RSF framework provides little physical basis for the extrapolation of these results to the scales and conditions of natural fault systems, and so open questions remain regarding the applicability of the experimentally obtained RSF parameters for predicting seismic cycle transients. As an alternative to classical RSF, microphysics-based models offer means for interpreting laboratory and field observations, but are generally over-simplified with respect to heterogeneous natural systems. In order to bridge the temporal and spatial gap between the laboratory and nature, we have implemented existing microphysical model formulations into an earthquake cycle simulator. Through this numerical framework, we make a direct comparison between simulations exhibiting RSF-controlled fault rheology, and simulations in which the fault rheology is dictated by the microphysical model. Even though the input parameters for the RSF simulation are directly derived from the microphysical model, the microphysics-based simulations produce significantly smaller seismic event sizes than the RSF-based simulation, and suggest a more stable fault slip behaviour. Our results reveal fundamental limitations in using classical rate-and-state friction for the extrapolation of laboratory results. The microphysics-based approach offers a more complete framework in this respect, and may be used for a more detailed study of the seismic cycle in relation to material properties and fault zone pressure-temperature conditions.

  11. Numerical analysis

    CERN Document Server

    Rao, G Shanker

    2006-01-01

    About the Book: This book provides an introduction to Numerical Analysis for the students of Mathematics and Engineering. The book is designed in accordance with the common core syllabus of Numerical Analysis of Universities of Andhra Pradesh and also the syllabus prescribed in most of the Indian Universities. Salient features: Approximate and Numerical Solutions of Algebraic and Transcendental Equation Interpolation of Functions Numerical Differentiation and Integration and Numerical Solution of Ordinary Differential Equations The last three chapters deal with Curve Fitting, Eigen Values and Eigen Vectors of a Matrix and Regression Analysis. Each chapter is supplemented with a number of worked-out examples as well as number of problems to be solved by the students. This would help in the better understanding of the subject. Contents: Errors Solution of Algebraic and Transcendental Equations Finite Differences Interpolation with Equal Intervals Interpolation with Unequal Int...

  12. Teaching corner: child family health international : the ethics of asset-based global health education programs.

    Science.gov (United States)

    Evert, Jessica

    2015-03-01

    Child Family Health International (CFHI) is a U.S.-based nonprofit, nongovernmental organization (NGO) that has more than 25 global health education programs in seven countries annually serving more than 600 interprofessional undergraduate, graduate, and postgraduate participants in programs geared toward individual students and university partners. Recognized by Special Consultative Status with the United Nations Economic and Social Council (ECOSOC), CFHI utilizes an asset-based community engagement model to ensure that CFHI's programs challenge, rather than reinforce, historical power imbalances between the "Global North" and "Global South." CFHI's programs are predicated on ethical principles including reciprocity, sustainability, humility, transparency, nonmaleficence, respect for persons, and social justice.

  13. Web-based health interventions for family caregivers of elderly individuals: A Scoping Review.

    Science.gov (United States)

    Wasilewski, Marina B; Stinson, Jennifer N; Cameron, Jill I

    2017-07-01

    For the growing proportion of elders globally, aging-related illnesses are primary causes of morbidity causing reliance on family members for support in the community. Family caregivers experience poorer physical and mental health than their non-caregiving counterparts. Web-based interventions can provide accessible support to family caregivers to offset declines in their health and well-being. Existing reviews focused on web-based interventions for caregivers have been limited to single illness populations and have mostly focused on the efficacy of the interventions. We therefore have limited insight into how web-based interventions for family caregiver have been developed, implemented and evaluated across aging-related illness. To describe: a) theoretical underpinnings of the literature; b) development, content and delivery of web-based interventions; c) caregiver usage of web-based interventions; d) caregiver experience with web-based interventions and e) impact of web-based interventions on caregivers' health outcomes. We followed Arksey and O'Malley's methodological framework for conducting scoping reviews which entails setting research questions, selecting relevant studies, charting the data and synthesizing the results in a report. Fifty-three publications representing 32 unique web-based interventions were included. Over half of the interventions were targeted at dementia caregivers, with the rest targeting caregivers to the stroke, cancer, diabetes and general frailty populations. Studies used theory across the intervention trajectory. Interventions aimed to improve a range of health outcomes for caregivers through static and interactive delivery methods Caregivers were satisfied with the usability and accessibility of the websites but usage was generally low and declined over time. Depression and caregiver burden were the most common outcomes evaluated. The interventions ranged in their impact on health and social outcomes but reductions in perception of

  14. Numerical Multilevel Upscaling for Incompressible Flow in Reservoir Simulation: An Element-based Algebraic Multigrid (AMGe) Approach

    DEFF Research Database (Denmark)

    Christensen, Max la Cour; Villa, Umberto; Engsig-Karup, Allan Peter

    2017-01-01

    associated with non-planar interfaces between agglomerates, the coarse velocity space has guaranteed approximation properties. The employed AMGe technique provides coarse spaces with desirable local mass conservation and stability properties analogous to the original pair of Raviart-Thomas and piecewise......We study the application of a finite element numerical upscaling technique to the incompressible two-phase porous media total velocity formulation. Specifically, an element agglomeration based Algebraic Multigrid (AMGe) technique with improved approximation proper ties [37] is used, for the first...... discontinuous polynomial spaces, resulting in strong mass conservation for the upscaled systems. Due to the guaranteed approximation properties and the generic nature of the AMGe method, recursive multilevel upscaling is automatically obtained. Furthermore, this technique works for both structured...

  15. Similarity-based interference in a working memory numerical updating task: age-related differences between younger and older adults.

    Science.gov (United States)

    Pelegrina, Santiago; Borella, Erika; Carretti, Barbara; Lechuga, M Teresa

    2012-01-01

    Similarity among representations held simultaneously in working memory (WM) is a factor which increases interference and hinders performance. The aim of the current study was to investigate age-related differences between younger and older adults in a working memory numerical updating task, in which the similarity between information held in WM was manipulated. Results showed a higher susceptibility of older adults to similarity-based interference when accuracy, and not response times, was considered. It was concluded that older adults' WM difficulties appear to be due to the availability of stored information, which, in turn, might be related to the ability to generate distinctive representations and to the process of binding such representations to their context when similar information has to be processed in WM.

  16. Collective Order within Family; An Axial Phenomenon regarding the Effect of Islamic Teachings on the ‎Economic Action of Family: A Study Based on the Grounded Theory

    Directory of Open Access Journals (Sweden)

    ‎ V. Arshadi

    2016-02-01

    Full Text Available The present article aims to identify the intermediate factors regarding the effect of Islamic teachings on family economic action through an interpretative and multifactorial approach. The method is qualitative and is based on grounded theory method”. Due to the interdisciplinary nature of the matter, a semi-structured interview with 16 experts on Islamic economy, Muslim consumer behavior, educational sciences, psychology and sociology and the issue of values and actions has served as the main research tool. The samples were selected through purposive sampling and snowball method, and interviews were conducted to the point of theoretical saturation. Findings of data analysis in this three steps show that factors such as the synergy of the high quality of transfer of teachings from formal and informal education institutes, high quality of the perception of teachings by family members, high quality of family income resources, and faith and belief in the accountability in the Hereafter can create collective order within family based on the subjective value of Islamic economic teaching. The collective order is influenced by "underlying" and "structural" factors and leads to discretion behavior. This paper is also innovative in terms of its profound look into the formation of economic behavior within the family.

  17. Providing a secure base: parenting children in long-term foster family care.

    Science.gov (United States)

    Schofield, Gillian; Beek, Mary

    2005-03-01

    This paper reports on a longitudinal study of children growing up in long-term foster family care. It focuses attention on the challenges for foster carers in providing a secure base for foster children in middle childhood and early adolescence, who have come predominantly from backgrounds of abuse, neglect, and psychosocial adversity. Separation and loss in the children's lives, often through multiple placements, increase the likelihood of difficulties across a range of development. These children tend to be wary, distrustful, and controlling when they enter foster placements, but need from their carers many of the caregiving qualities most commonly described as providing a secure base in infancy. This study describes a model of parenting which uses four caregiving dimensions that are consistent with attachment theory and research: promoting trust in availability, promoting reflective function, promoting self-esteem, and promoting autonomy. A fifth dimension, promoting family membership, is added, as it reflects the need for children in long-term foster family care to experience the security that comes from a sense of identity and belonging. Qualitative data from the study demonstrates the usefulness of this model as a framework for analysis, but also suggests the potential use of such a framework for working with and supporting foster carers.

  18. Lack of MEF2A Delta7aa mutation in Irish families with early onset ischaemic heart disease, a family based study.

    LENUS (Irish Health Repository)

    Horan, Paul G

    2006-01-01

    BACKGROUND: Ischaemic heart disease (IHD) is a complex disease due to the combination of environmental and genetic factors. Mutations in the MEF2A gene have recently been reported in patients with IHD. In particular, a 21 base pair deletion (Delta7aa) in the MEF2A gene was identified in a family with an autosomal dominant pattern of inheritance of IHD. We investigated this region of the MEF2A gene using an Irish family-based study, where affected individuals had early-onset IHD. METHODS: A total of 1494 individuals from 580 families were included (800 discordant sib-pairs and 64 parent-child trios). The Delta7aa region of the MEF2A gene was investigated based on amplicon size. RESULTS: The Delta7aa mutation was not detected in any individual. Variation in the number of CAG (glutamate) and CCG (proline) residues was detected in a nearby region. However, this was not found to be associated with IHD. CONCLUSION: The Delta7aa mutation was not detected in any individual within the study population and is unlikely to play a significant role in the development of IHD in Ireland. Using family-based tests of association the number of tri-nucleotide repeats in a nearby region of the MEF2A gene was not associated with IHD in our study group.

  19. Analysis of Different Methods for Wave Generation and Absorption in a CFD-Based Numerical Wave Tank

    Directory of Open Access Journals (Sweden)

    Adria Moreno Miquel

    2018-06-01

    Full Text Available In this paper, the performance of different wave generation and absorption methods in computational fluid dynamics (CFD-based numerical wave tanks (NWTs is analyzed. The open-source CFD code REEF3D is used, which solves the Reynolds-averaged Navier–Stokes (RANS equations to simulate two-phase flow problems. The water surface is computed with the level set method (LSM, and turbulence is modeled with the k-ω model. The NWT includes different methods to generate and absorb waves: the relaxation method, the Dirichlet-type method and active wave absorption. A sensitivity analysis has been conducted in order to quantify and compare the differences in terms of absorption quality between these methods. A reflection analysis based on an arbitrary number of wave gauges has been adopted to conduct the study. Tests include reflection analysis of linear, second- and fifth-order Stokes waves, solitary waves, cnoidal waves and irregular waves generated in an NWT. Wave breaking over a sloping bed and wave forces on a vertical cylinder are calculated, and the influence of the reflections on the wave breaking location and the wave forces on the cylinder is investigated. In addition, a comparison with another open-source CFD code, OpenFOAM, has been carried out based on published results. Some differences in the calculated quantities depending on the wave generation and absorption method have been observed. The active wave absorption method is seen to be more efficient for long waves, whereas the relaxation method performs better for shorter waves. The relaxation method-based numerical beach generally results in lower reflected waves in the wave tank for most of the cases simulated in this study. The comparably better performance of the relaxation method comes at the cost of larger computational requirements due to the relaxation zones that have to be included in the domain. The reflections in the NWT in REEF3D are generally lower than the published results for

  20. [The genotype-based haplotype relative risk and transmission disequilibrium test analyses of familial febrile convulsions].

    Science.gov (United States)

    Qi, Y; Wu, X; Guo, Z; Zhang, J; Pan, H; Li, M; Bao, X; Peng, J; Zou, L; Lin, Q

    1999-10-01

    To confirm the linkage of familial febrile convulsions to the short arm of chromosome 6(6p) or the long arm of chromosome 8(8q). The authors finished genotyping of Pst I locus on the coding region of heat shock protein (HSP) 70, 5'untranslated region of HSP70-1, 3' untranslated region of HSP70-2, D8S84 and D8S85. The data were processed by the genotype-based haplotype relative risk(GHRR) and transmission disequilibrium test(TDT) methods in PPAP. Some signs of association and disequilibrium between D8S85 and FC were shown by GHRR and TDT. A suspect linkage of familial febrile convulsions to the long arm of chromosome 8 has been proposed.

  1. On the Power and Limits of Sequence Similarity Based Clustering of Proteins Into Families

    DEFF Research Database (Denmark)

    Wiwie, Christian; Röttger, Richard

    2017-01-01

    Over the last decades, we have observed an ongoing tremendous growth of available sequencing data fueled by the advancements in wet-lab technology. The sequencing information is only the beginning of the actual understanding of how organisms survive and prosper. It is, for instance, equally...... important to also unravel the proteomic repertoire of an organism. A classical computational approach for detecting protein families is a sequence-based similarity calculation coupled with a subsequent cluster analysis. In this work we have intensively analyzed various clustering tools on a large scale. We...... used the data to investigate the behavior of the tools' parameters underlining the diversity of the protein families. Furthermore, we trained regression models for predicting the expected performance of a clustering tool for an unknown data set and aimed to also suggest optimal parameters...

  2. Numerical analysis of splashing fluid using hybrid method of mesh-based and particle-based modelings

    International Nuclear Information System (INIS)

    Tanaka, Nobuatsu; Ogawara, Takuya; Kaneda, Takeshi; Maseguchi, Ryo

    2009-01-01

    In order to simulate splashing and scattering fluid behaviors, we developed a hybrid method of mesh-based model for large-scale continuum fluid and particle-based model for small-scale discrete fluid particles. As for the solver of the continuum fluid, we adopt the CIVA RefIned Multiphase SimulatiON (CRIMSON) code to evaluate two phase flow behaviors based on the recent computational fluid dynamics (CFD) techniques. The phase field model has been introduced to the CRIMSON in order to solve the problem of loosing phase interface sharpness in long-term calculation. As for the solver of the discrete fluid droplets, we applied the idea of Smoothed Particle Hydrodynamics (SPH) method. Both continuum fluid and discrete fluid interact each other through drag interaction force. We verified our method by applying it to a popular benchmark problem of collapse of water column problems, especially focusing on the splashing and scattering fluid behaviors after the column collided against the wall. We confirmed that the gross splashing and scattering behaviors were well reproduced by the introduction of particle model while the detailed behaviors of the particles were slightly different from the experimental results. (author)

  3. Exploring parent attitudes around using incentives to promote engagement in family-based weight management programs

    Directory of Open Access Journals (Sweden)

    Elizabeth Jacob-Files

    2018-06-01

    Full Text Available Incentives can promote adult wellness. We sought to examine whether incentives might help overcome barriers to engagement in child weight management programs and the ideal value, type and recipient of incentives. In 2017, we conducted semi-structured phone interviews with parents of children ≤17 years old, formerly or currently affected by obesity, who had (n = 11 or had never (n = 12 participated in family-based behavioral treatment (FBT for obesity. Interviews explored the range and type of incentives families would be willing to accept. Interview transcripts were coded and data were analyzed using a thematic analysis. We found that some parents were skeptical about receiving cash incentives. However, once treatment-related costs were identified, some became more interested in reimbursement for out of pocket expenditures. Most parents felt up to $100/month would be adequate and that incentives should be tied to changing behaviors, not BMI. Some interviewees expressed preferences for non-cash incentives (e.g. a gift card over cash incentives. Parents were willing to share incentives with adolescents, up to $50/month, but there was concern about incentives affecting a child's intrinsic motivation for behavior change. All parents acknowledged that moderate incentives alone couldn't overcome the realities of structural and familial barriers to engaging in weight management programs. In summary, we identified aspects of an incentive program to promote engagement in FBT that would be desirable and feasible to implement. Future quantitative work can reveal the value and structure of incentives that are effective for improving obesogenic health behaviors and outcomes. Keywords: Behavioral economics, Family-based treatment, Financial incentives, Health incentives, Childhood obesity

  4. Evidence-based development of school-based and family-involved prevention of overweight across Europe

    DEFF Research Database (Denmark)

    Brug, Johannes; Velde, Saskia J. te; Chinapaw, Mai J.M.

    2010-01-01

    balance among school-aged children. Earlier studies have indicated that school and family environments are key determinants of energy-balance behaviors in schoolchildren. Schools are an important setting for health promotion in this age group, but school-based interventions mostly fail to target...... intervention development targeting the most relevant energy balance-related behaviors and their personal, family-environmental and school-environmental determinants applying the Intervention Mapping protocol. The intervention scheme will undergo formative and pilot evaluation in five countries. The results......Background: There is an urgent need for more carefully developed public health measures in order to curb the obesity epidemic among youth. The overall aim of the "EuropeaN Energy balance Research to prevent excessive weight Gain among Youth" (ENERGY)-project is the development and formative...

  5. Numerical Method based on SIMPLE Algorithm for a Two-Phase Flow with Non-condensable Gas

    International Nuclear Information System (INIS)

    Kim, Jong Tae

    2009-08-01

    In this study, a numerical method based on SIMPLE algorithm for a two-phase flow with non-condensable gas has been developed in order to simulate thermal hydraulics in a containment of a nuclear power plant. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields include gas, drops, and continuous liquid. The gas field can contains vapor and non-condensable gases such as air and hydrogen. In order to resolve mixing phenomena of gas species, gas transport equations for each species base on the gas mass fractions are solved with gas phase governing equations such as mass, momentum and energy equations. Methods to evaluate the properties of the gas species were implemented in the code. They are constant or polynomial function based a user input and a property library from Chemkin and JANAF table for gas specific heat. Properties for the gas mixture which are dependent on mole fractions of the gas species were evaluated by a mix rule

  6. Telemedicine of family-based treatment for adolescent anorexia nervosa: A protocol of a treatment development study.

    Science.gov (United States)

    Anderson, Kristen E; Byrne, Catherine; Goodyear, Alexandria; Reichel, Ryan; Le Grange, Daniel

    2015-01-01

    Family-based treatment is an efficacious treatment available for adolescents with anorexia nervosa. Yet the implementation of this treatment, at least in the United States, is challenging due to a limited number of trained family-based treatment therapists and the concentration of these therapists in a limited number of urban centers. The use of telemedicine in the delivery of family-based treatment can increase access to this therapy for this patient population. This two-year treatment development study (December 2013-November 2015) follows a two-wave iterative case series design. The study is ongoing and addresses the treatment needs of families in remote, rural, or underrepresented parts of the United States by delivering family-based treatment via telemedicine (video chat). The first six months of the study was dedicated to selecting a cloud-based secure telemedicine portal for use with participants. Recruitment for the first of two consecutive case series (N = 5) began during month seven. After these five patients completed treatment, a systematic review of treatment via feedback from participants and therapists related to the delivery of this model and use of technology was completed. A second wave of recruitment is underway (N = 5). At the end of both waves (N = 10), and after a second review of treatment, we should be able to establish the feasibility and acceptability of family-based treatment delivered via telemedicine for this patient population. This study is the first attempt to deliver family-based treatment for adolescents with anorexia nervosa via telemedicine. If delivering family-based treatment in this format is feasible, it will provide access to an evidence-based treatment for families heretofore unable to participate in specialist treatment for their child's eating disorder.

  7. Healthy Children, Strong Families 2: A randomized controlled trial of a healthy lifestyle intervention for American Indian families designed using community-based approaches.

    Science.gov (United States)

    Tomayko, Emily J; Prince, Ronald J; Cronin, Kate A; Parker, Tassy; Kim, Kyungmann; Grant, Vernon M; Sheche, Judith N; Adams, Alexandra K

    2017-04-01

    Background/Aims Few obesity prevention trials have focused on young children and their families in the home environment, particularly in underserved communities. Healthy Children, Strong Families 2 is a randomized controlled trial of a healthy lifestyle intervention for American Indian children and their families, a group at very high risk of obesity. The study design resulted from our long-standing engagement with American Indian communities, and few collaborations of this type resulting in the development and implementation of a randomized clinical trial have been described. Methods Healthy Children, Strong Families 2 is a lifestyle intervention targeting increased fruit and vegetable intake, decreased sugar intake, increased physical activity, decreased TV/screen time, and two less-studied risk factors: stress and sleep. Families with young children from five American Indian communities nationwide were randomly assigned to a healthy lifestyle intervention ( Wellness Journey) augmented with social support (Facebook and text messaging) or a child safety control group ( Safety Journey) for 1 year. After Year 1, families in the Safety Journey receive the Wellness Journey, and families in the Wellness Journey start the Safety Journey with continued wellness-focused social support based on communities' request that all families receive the intervention. Primary (adult body mass index and child body mass index z-score) and secondary (health behaviors) outcomes are assessed after Year 1 with additional analyses planned after Year 2. Results To date, 450 adult/child dyads have been enrolled (100% target enrollment). Statistical analyses await trial completion in 2017. Lessons learned Conducting a community-partnered randomized controlled trial requires significant formative work, relationship building, and ongoing flexibility. At the communities' request, the study involved minimal exclusion criteria, focused on wellness rather than obesity, and included an active

  8. The Maudsley Model of Family-Based Treatment for Anorexia Nervosa: A Qualitative Evaluation of Parent-to-Parent Consultation

    Science.gov (United States)

    Rhodes, Paul; Brown, Jac; Madden, Sloane

    2009-01-01

    This article describes the qualitative analysis of a randomized control trial that explores the use of parent-to-parent consultations as an augmentation to the Maudsley model of family-based treatment for anorexia. Twenty families were randomized into two groups, 10 receiving standard treatment and 10 receiving an additional parent-to-parent…

  9. Increasing School Success through Partnership-Based Family Competency Training: Experimental Study of Long-Term Outcomes

    Science.gov (United States)

    Spoth, Richard; Randall, G. Kevin; Shin, Chungyeol

    2008-01-01

    An expanding body of research suggests an important role for parent or family competency training in children's social-emotional learning and related school success. This article summarizes a test of a longitudinal model examining partnership-based family competency training effects on academic success in a general population. Specifically, it…

  10. Association of "ADAM10" and "CAMK2A" Polymorphisms with Conduct Disorder: Evidence from Family-Based Studies

    Science.gov (United States)

    Jian, Xue-Qiu; Wang, Ke-Sheng; Wu, Tie-Jian; Hillhouse, Joel J.; Mullersman, Jerald E.

    2011-01-01

    Twin and family studies have shown that genetic factors play a role in the development of conduct disorder (CD). The purpose of this study was to identify genetic variants associated with CD using a family-based association study. We used 4,720 single nucleotide polymorphisms (SNPs) from the Illumina Panel and 11,120 SNPs from the Affymetrix 10K…

  11. Competency Assessment in Family Medicine Residency: Observations, Knowledge-Based Examinations, and Advancement.

    Science.gov (United States)

    Mainous, Arch G; Fang, Bo; Peterson, Lars E

    2017-12-01

    The Family Medicine (FM) Milestones are competency-based assessments of residents in key dimensions relevant to practice in the specialty. Residency programs use the milestones in semiannual reviews of resident performance from the time of entry into the program to graduation. Using a national sample, we investigated the relationship of FM competency-based assessments to resident progress and the complementarity of milestones with knowledge-based assessments in FM residencies. We used midyear and end-of-year milestone ratings for all FM residents in Accreditation Council for Graduate Medical Education-accredited programs during academic years 2014-2015 and 2015-2016. The milestones contain 22 items across 6 competencies. We created a summative index across the milestones. The American Board of Family Medicine database provided resident demographics and in-training examination (ITE) scores. We linked information to the milestone data. The sample encompassed 6630 FM residents. The summative milestone index increased, on average, for each cohort (postgraduate year 1 [PGY-1] to PGY-2 and PGY-2 to PGY-3) at each assessment. The correlation between the milestone index that excluded the medical knowledge milestone and ITE scores was r  = .195 ( P  ITE scores and composite milestone assessments were higher for residents who advanced than for those who did not. Competency-based assessment using the milestones for FM residents seems to be a viable multidimensional tool to assess the successful progression of residents.

  12. A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS

    Directory of Open Access Journals (Sweden)

    V. I. Milykh

    2016-12-01

    Full Text Available Purpose. The work is dedicated to the presentation of the principle of construction and implementation of an automated synthesis system of the turbo-generator (TG electromagnetic system in the case of its modernization. This is done on the example of changing the number of the stator core slots. Methodology. The basis of the synthesis is a TG basic construction. Its structure includes the mathematical and physical-geometrical models, as well as the calculation model for the FEMM software environment, providing the numerical calculations of the magnetic fields and electromagnetic parameters of TG. The mathematical model links the changing and basic dimensions and parameters of the electromagnetic system, provided that the TG power parameters are ensured. The physical-geometrical model is the geometric mapping of the electromagnetic system with the specified physical properties of its elements. This model converts the TG electromagnetic system in a calculation model for the FEMM program. Results. Testing of the created synthesis system is carried out on the example of the 340 MW TG. The geometric, electromagnetic and power parameters of its basic construction and its new variants at the different numbers of the stator slots are compared. The harmonic analysis of the temporal function of the stator winding EMF is also made for the variants being compared. Originality. The mathematical model, relating the new and base parameters of TG at the changing of the number of the stator slots is created. A Lua script, providing the numerical-field calculations of the TG electromagnetic parameters in the FEMM software environment is worked out. Construction of the constructive and calculation models, the numerical-field calculations and delivery of results are performed by a computer automatically, that ensures high efficiency of the TG design process. Practical value. The considered version of the TG modernization on the example of changing the number of the

  13. Numerical simulation of mid-latitude ionospheric E-region based on SEEK and SEEK-2 observations

    Directory of Open Access Journals (Sweden)

    T. Yokoyama

    2005-10-01

    Full Text Available Observational campaigns of the mid-latitude ionospheric E-region with sounding rockets and ground-based instruments were conducted in 1996 (SEEK and 2002 (SEEK-2. Both of them were successfully conducted to bring important findings about the mid-latitude E-region and quasi-periodic (QP VHF radar echoes. The observational results in the SEEK and the SEEK-2 are compared with numerical simulations and discussed in this paper. While sporadic-E (Es-layers are actually formed by the observed neutral wind, it is difficult for the constant wind shear to produce the sharp Es-layer gradient. However, once they are formed in the lower E-region, they cannot easily be dissipated by the simple diffusive motion. The polarization electric field, calculated under the condition at the rocket launch time, shows similar amplitude and structure to the measurement around the Es-layer altitude. The structure of the plasma density and the electric field above the Es-layer observed in the SEEK-2 showed a wave-like pattern up to an altitude of 150 km. Considering a mapping of the polarization electric field generated within the Es-layers, gravity waves are the possible source of the wave-like structure of the measured electric fields and sub-peaks of the electron density above the main Es-layers. Fluctuation of the measured magnetic field is reproduced by Hall or field-aligned current driven by the polarization electric field. The current theoretical models for QP echoes and the polarization electric field are basically verified by the discussion in this paper. Keywords. Ionospheric irregularities – Mid-latitude ionosphere – Numerical simulation studies

  14. A numerical study of tsunami wave impact and run-up on coastal cliffs using a CIP-based model

    Science.gov (United States)

    Zhao, Xizeng; Chen, Yong; Huang, Zhenhua; Hu, Zijun; Gao, Yangyang

    2017-05-01

    There is a general lack of understanding of tsunami wave interaction with complex geographies, especially the process of inundation. Numerical simulations are performed to understand the effects of several factors on tsunami wave impact and run-up in the presence of gentle submarine slopes and coastal cliffs, using an in-house code, a constrained interpolation profile (CIP)-based model. The model employs a high-order finite difference method, the CIP method, as the flow solver; utilizes a VOF-type method, the tangent of hyperbola for interface capturing/slope weighting (THINC/SW) scheme, to capture the free surface; and treats the solid boundary by an immersed boundary method. A series of incident waves are arranged to interact with varying coastal geographies. Numerical results are compared with experimental data and good agreement is obtained. The influences of gentle submarine slope, coastal cliff and incident wave height are discussed. It is found that the tsunami amplification factor varying with incident wave is affected by gradient of cliff slope, and the critical value is about 45°. The run-up on a toe-erosion cliff is smaller than that on a normal cliff. The run-up is also related to the length of a gentle submarine slope with a critical value of about 2.292 m in the present model for most cases. The impact pressure on the cliff is extremely large and concentrated, and the backflow effect is non-negligible. Results of our work are highly precise and helpful in inverting tsunami source and forecasting disaster.

  15. Fish Individual-based Numerical Simulator (FINS): A particle-based model of juvenile salmonid movement and dissolved gas exposure history in the Columbia River Basin

    International Nuclear Information System (INIS)

    Scheibe, Timothy D.; Richmond, Marshall C.

    2002-01-01

    This paper describes a numerical model of juvenile salmonid migration in the Columbia and Snake Rivers. The model, called the Fish Individual-based Numerical Simulator or FINS, employs a discrete, particle-based approach to simulate the migration and history of exposure to dissolved gases of individual fish. FINS is linked to a two-dimensional (vertically-averaged) hydrodynamic simulator that quantifies local water velocity, temperature, and dissolved gas levels as a function of river flow rates and dam operations. Simulated gas exposure histories can be input to biological mortality models to predict the effects of various river configurations on fish injury and mortality due to dissolved gas supersaturation. Therefore, FINS serves as a critical linkage between hydrodynamic models of the river system and models of biological impacts. FINS was parameterized and validated based on observations of individual fish movements collected using radiotelemetry methods during 1997 and 1998 . A quasi-inverse approach was used to decouple fish swimming movements from advection with the local water velocity, allowing inference of time series of non-advective displacements of individual fish from the radiotelemetry data. Statistical analyses of these displacements are presented, and confirm that strong temporal correlation of fish swimming behavior persists in some cases over several hours. A correlated random-walk model was employed to simulate the observed migration behavior, and parameters of the model were estimated that lead to close correspondence between predictions and observations

  16. Family Functioning and Relationship Quality for Adolescents in Family-based Treatment with Severe Anorexia Nervosa Compared with Non-clinical Adolescents.

    Science.gov (United States)

    Wallis, Andrew; Miskovic-Wheatley, Jane; Madden, Sloane; Rhodes, Paul; Crosby, Ross D; Cao, Li; Touyz, Stephen

    2018-01-01

    This longitudinal study explored family functioning and relationship quality for adolescents with severe anorexia nervosa (AN). An important outcome given healthy family functioning supports effective adolescent development. Fifty-four female adolescents and their parents, treated with family-based treatment after inpatient admission, and 49 non-clinical age-matched adolescents and their parents were compared at assessment and 6 months after session 20. At baseline, AN group mothers and fathers reported poorer family function. AN adolescents were notably similar to controls, reporting poorer function in only one domain. There were no changes for adolescents, an improvement for mothers in the AN group, but an increase in perceived impairment for fathers in both groups, with AN fathers more affected. The similarity in adolescent reports and the increase for fathers over time may indicate that normal adolescent family processes occur even in the midst of serious illness. There is a need to provide intervention to ameliorate the impact of treatment on parents. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association.

  17. Randomized Trial of a Family-based, Automated, Conversational Obesity Treatment Program for Underserved Populations

    Science.gov (United States)

    Wright, J. A.; Phillips, B.D.; Watson, B.L.; Newby, P.K.; Norman, G. J.; Adams, W.G.

    2013-01-01

    Objective To evaluate the acceptability and feasibility of a scalable obesity treatment program integrated with pediatric primary care and delivered using interactive voice technology (IVR) to families from underserved populations. Design and Methods Fifty parent-child dyads (child 9–12 yrs, BMI >95th percentile) were recruited from a pediatric primary care clinic and randomized to either an IVR or a wait-list control (WLC) group. The majority were lower-income, African-American (72%) families. Dyads received IVR calls for 12 weeks. Call content was informed by two evidenced-based interventions. Anthropometric and behavioral variables were assessed at baseline and 3 mo follow-up. Results Forty-three dyads completed the study. IVR parents ate 1 cup more fruit than WLC (p 75% agreed that the calls were useful, made for people like them, credible, and helped them eat healthy foods. Conclusion An obesity treatment program delivered via IVR may be an acceptable and feasible resource for families from underserved populations. PMID:23512915

  18. Outcome parameters associated with perceived helpfulness of family-based treatment for adolescent eating disorders.

    Science.gov (United States)

    Singh, Simar; Accurso, Erin C; Hail, Lisa; Goldschmidt, Andrea B; Le Grange, Daniel

    2018-04-10

    Family-based treatment (FBT) is an efficacious treatment for adolescent eating disorders, yet it is not routinely implemented in clinical practice. Given that consumers play a role in treatment selection, this study sought to examine families' perspectives on FBT and remission markers associated with increased treatment satisfaction across families. Participants were 40 adolescents and 43 caregivers who received outpatient FBT. FBT helpfulness was assessed using a treatment follow-up questionnaire, and eating disorder symptomatology was assessed using percent expected body weight (%EBW) and the eating disorder examination (EDE). Regression analyses were used to assess whether changes in symptoms from baseline to end-of-treatment (EOT) were significantly associated with helpfulness reports. On average, patients and their parents perceived FBT as "quite helpful" and "extremely helpful," respectively. Improvements in all EDE subscales, with the exception of restraint, were significantly associated with adolescent report of helpfulness (all p < .05); increase in %EBW was significantly associated with maternal report of helpfulness (p = .03). There were no significant findings for paternal report. Both patients and their parents perceived FBT as helpful, but patients seemed to prioritize cognitive improvements while mothers prioritized physical improvements in rating their satisfaction with FBT. © 2018 Wiley Periodicals, Inc.

  19. Worksite-based internet multimedia program for family caregivers of persons with dementia.

    Science.gov (United States)

    Beauchamp, Natasha; Irvine, A Blair; Seeley, John; Johnson, Brian

    2005-12-01

    Our goal was to evaluate the efficacy of a multimedia support program delivered over the Internet to employed family caregivers of persons with dementia. The evaluation of this program involved 299 employed family caregivers participating in a pretest-posttest randomized clinical trial with a 30-day follow-up and a waitlist control condition. Validated instruments include the Center for Epidemiologic Studies-Depression scale, the State-Trait Anxiety Inventory, the Caregiver Strain scale from Benjamin Rose, and Positive Aspects of Caregiving used in the nationwide REACH study. Those who viewed Caregiver's Friend: Dealing with Dementia 30 days postexposure demonstrated significant improvements in depression, anxiety, level and frequency of stress, caregiver strain, self-efficacy, and intention to seek help, as well as perceptions of positive aspects of caregiving. Interactive multimedia interventions delivered over the Internet appear to be uniquely suited to provide low-cost, effective, convenient, individually tailored programs that present educational information, cognitive and behavioral skills, and affective learning opportunities. This makes Web-based multimedia a promising avenue for work-life balance programs, employee-assistance providers, and organizations interested in improving family caregiver health and well-being.

  20. Variances in family carers' quality of life based on selected relationship and caregiving indicators: A quantitative secondary analysis.

    Science.gov (United States)

    Naef, Rahel; Hediger, Hannele; Imhof, Lorenz; Mahrer-Imhof, Romy

    2017-06-01

    To determine subgroups of family carers based on family relational and caregiving variables and to explore group differences in relation to selected carer outcomes. Family caregiving in later life holds a myriad of positive and negative outcomes for family members' well-being. However, factors that constitute family carers' experience and explain variances are less well understood. A secondary data analysis using cross-sectional data from a controlled randomised trial with community-dwelling people 80 years or older and their families. A total of 277 paired data sets of older persons and their family carers were included into the analysis. Data were collected via mailed questionnaires and a geriatric nursing assessment. A two-step cluster analysis was performed to determine subgroups. To discern group differences, appropriate tests for differences with Bonferroni correction were used. Two family carer groups were identified. The low-intensity caregiver group (57% of carers) reported high relationship quality and self-perceived ease of caregiving. In contrast, the high-intensity caregiver group (43% of carers) experienced significantly lower relationship quality, felt less prepared and appraised caregiving as more difficult, time intensive and burdensome. The latter cared for older, frailer and more dependent octogenarians and had significantly lower levels of quality of life and self-perceived health compared to the low-intensity caregiver group. A combination of family relational and caregiving variables differentiates those at risk for adverse outcomes. Family carers of frailer older people tend to experience higher strain, lower relationship quality and ability to work together as a family. Nurses should explicitly assess family carer needs, in particular when older persons are frail. Family carer support interventions should address caregiving preparedness, demand and burden, as well as concerns situated in the relationship. © 2016 John Wiley & Sons Ltd.