WorldWideScience

Sample records for numeric entry tasks

  1. Residents' numeric inputting error in computerized physician order entry prescription.

    Science.gov (United States)

    Wu, Xue; Wu, Changxu; Zhang, Kan; Wei, Dong

    2016-04-01

    Computerized physician order entry (CPOE) system with embedded clinical decision support (CDS) can significantly reduce certain types of prescription error. However, prescription errors still occur. Various factors such as the numeric inputting methods in human computer interaction (HCI) produce different error rates and types, but has received relatively little attention. This study aimed to examine the effects of numeric inputting methods and urgency levels on numeric inputting errors of prescription, as well as categorize the types of errors. Thirty residents participated in four prescribing tasks in which two factors were manipulated: numeric inputting methods (numeric row in the main keyboard vs. numeric keypad) and urgency levels (urgent situation vs. non-urgent situation). Multiple aspects of participants' prescribing behavior were measured in sober prescribing situations. The results revealed that in urgent situations, participants were prone to make mistakes when using the numeric row in the main keyboard. With control of performance in the sober prescribing situation, the effects of the input methods disappeared, and urgency was found to play a significant role in the generalized linear model. Most errors were either omission or substitution types, but the proportion of transposition and intrusion error types were significantly higher than that of the previous research. Among numbers 3, 8, and 9, which were the less common digits used in prescription, the error rate was higher, which was a great risk to patient safety. Urgency played a more important role in CPOE numeric typing error-making than typing skills and typing habits. It was recommended that inputting with the numeric keypad had lower error rates in urgent situation. An alternative design could consider increasing the sensitivity of the keys with lower frequency of occurrence and decimals. To improve the usability of CPOE, numeric keyboard design and error detection could benefit from spatial

  2. Early Numerical Competence and Number Line Task Performance in Kindergarteners

    Science.gov (United States)

    Fanari, Rachele; Meloni, Carla; Massidda, Davide

    2017-01-01

    This work aims to evaluate the relationship between early numerical competence in kindergarteners and their numerical representations as measured by the number line task (NLT). Thirty-four 5-year-old children participated in the study. Children's early performance on symbolic and non-symbolic numerical tasks was considered to determine which was a…

  3. Negative Feedback for Small Capacitive Touchscreen Interfaces: A Usability Study for Data Entry Tasks.

    Science.gov (United States)

    Parikh, S P; Esposito, J M

    2012-01-01

    Touchscreen technology has become pervasive in the consumer product arena over the last decade, offering some distinct advantages such as software reconfigurable interfaces and the removal of space consuming mice and keyboards. However, there are significant drawbacks to these devices that have limited their adoption by some users. Most notably, standard touchscreens demand the user's visual attention and require them to look at the input device to avoid pressing the wrong button. This issue is particularly important for mobile, capacitive sensing, nonstylus devices, such as the iPhone where small button sizes can generate high error rates. While previous work has shown the benefits of augmenting such interfaces with audio or vibrotactile feedback, only positive feedback (confirmation of button presses) has been considered. In this paper, we present a simple prototype interface that provides negative vibrotactile feedback. By negative, we mean feedback is generated when an inactive or ambiguous part of the screen, such as the area between two buttons, is touched. First, we present a usability study comparing positive and negative vibrotactile feedback for a benchmark numerical data entry task. The difference in performance is not statistically significant, implying negative feedback provides comparable benefits. Next, based on the experimenter's observations and the users comments, we introduce a multimodal feedback strategy-combining complementary positive audio and negative vibrotactile signals. User tests on a text entry experiment show that, with multimodal feedback, users exhibit a (statistically significant) 24 percent reduction in corrective key presses, as compared to positive audio feedback alone. Exit survey comments indicate that users favor multimodal feedback.

  4. Numerical Approach for Goaf-Side Entry Layout and Yield Pillar Design in Fractured Ground Conditions

    Science.gov (United States)

    Jiang, Lishuai; Zhang, Peipeng; Chen, Lianjun; Hao, Zhen; Sainoki, Atsushi; Mitri, Hani S.; Wang, Qingbiao

    2017-11-01

    Entry driven along goaf-side (EDG), which is the development of an entry of the next longwall panel along the goaf-side and the isolation of the entry from the goaf with a small-width yield pillar, has been widely employed in China over the past several decades . The width of such a yield pillar has a crucial effect on EDG layout in terms of the ground control, isolation effect and resource recovery rate. Based on a case study, this paper presents an approach for evaluating, designing and optimizing EDG and yield pillar by considering the results from numerical simulations and field practice. To rigorously analyze the ground stability, the numerical study begins with the simulation of goaf-side stress and ground conditions. Four global models with identical conditions, except for the width of the yield pillar, are built, and the effect of pillar width on ground stability is investigated by comparing aspects of stress distribution, failure propagation, and displacement evolution during the entire service life of the entry. Based on simulation results, the isolation effect of the pillar acquired from field practice is also considered. The suggested optimal yield pillar design is validated using a field test in the same mine. Thus, the presented numerical approach provides references and can be utilized for the evaluation, design and optimization of EDG and yield pillars under similar geological and geotechnical circumstances.

  5. Numerical modelling of radon-222 entry into houses: An outline of techniques and results

    DEFF Research Database (Denmark)

    Andersen, C.E.

    2001-01-01

    Numerical modelling is a powerful tool for studies of soil gas and radon-222 entry into houses. It is the purpose of this paper to review some main techniques and results. In the past, modelling has focused on Darcy flow of soil gas (driven by indoor–outdoor pressure differences) and combined...... diffusive and advective transport of radon. Models of different complexity have been used. The simpler ones are finite-difference models with one or two spatial dimensions. The more complex models allow for full three-dimensional and time dependency. Advanced features include: soil heterogeneity, anisotropy......, fractures, moisture, non-uniform soil temperature, non-Darcy flow of gas, and flow caused by changes in the atmospheric pressure. Numerical models can be used to estimate the importance of specific factors for radon entry. Models are also helpful when results obtained in special laboratory or test structure...

  6. Experimental and Numerical Study of Water Entry Supercavity Influenced by Turbulent Drag-Reducing Additives

    Directory of Open Access Journals (Sweden)

    Chen-Xing Jiang

    2014-04-01

    Full Text Available The configurational and dynamic characteristics of water entry supercavities influenced by turbulent drag-reducing additives were studied through supercavitating projectile approach, experimentally and numerically. The projectile was projected vertically into water and aqueous solution of CTAC with weight concentrations of 100, 500, and 1000 ppm, respectively, using a pneumatic nail gun. The trajectories of the projectile and the supercavity configuration were recorded by a high-speed CCD camera. Besides, water entry supercavities in water and CTAC solution were numerically simulated based on unsteady RANS scheme, together with application of VOF multiphase model. The Cross viscosity model was adopted to represent the fluid property of CTAC solution. It was obtained that the numerical simulation results are in consistence with experimental data. Numerical and experimental results all show that the length and diameter of supercavity in drag-reducing solution are larger than those in water, and the drag coefficient is smaller than that in water; the maintaining time of supercavity is longer in solution as well. The surface tension plays an important role in maintaining the cavity. Turbulent drag-reducing additives have the potential in enhancement of supercavitation and drag reduction.

  7. Numerical study of water entry supercavitating flow around a vertical circular cylinder influenced by turbulent drag-reducing additives

    International Nuclear Information System (INIS)

    Jiang, C X; Cheng, J P; Li, F C

    2015-01-01

    This paper attempts to introduce a numerical simulation procedure to simulate water-entry problems influenced by turbulent drag-reducing additives in a viscous incompressible medium. Firstly we performed a numerical investigation on water-entry supercavities in water and turbulent drag-reducing solution at the impact velocity of 28.4 m/s to confirm the accuracy of the numerical method. Based on the verification, projectile entering water and turbulent drag-reducing solution at relatively high velocity of 142.7 m/s (phase transition is considered) is simulated. The cross viscosity equation was adopted to represent the shear-thinning characteristic of aqueous solution of drag-reducing additives. The configuration and dynamic characteristics of water entry supercavity, flow resistance were discussed respectively. It was obtained that the numerical simulation results are in consistence with experimental data. Numerical results show that the supercavity length in drag-reducing solution is larger than one in water and the velocity attenuates faster at high velocity than at low velocity; the influence of drag-reducing solution is more obvious at high impact velocity. Turbulent drag-reducing additives have the great potential for enhancement of supercavity

  8. Building Predictive Human Performance Models of Skill Acquisition in a Data Entry Task

    National Research Council Canada - National Science Library

    Fu, Wai-Tat; Gonzalez, Cleotilde; Healy, Alice F; Kole, James A; Bourne, Jr., Lyle E

    2006-01-01

    .... Since data entry is a central component in most human-machine interaction, a predictive model of performance will provide useful information that informs interface design and effectiveness of training...

  9. The distance effect in numerical memory-updating tasks.

    Science.gov (United States)

    Lendínez, Cristina; Pelegrina, Santiago; Lechuga, Teresa

    2011-05-01

    Two experiments examined the role of numerical distance in updating numerical information in working memory. In the first experiment, participants had to memorize a new number only when it was smaller than a previously memorized number. In the second experiment, updating was based on an external signal, which removed the need to perform any numerical comparison. In both experiments, distance between the memorized number and the new one was manipulated. The results showed that smaller distances between the new and the old information led to shorter updating times. This graded facilitation suggests that the process by which information is substituted in the focus of attention involves maintaining the shared features between the new and the old number activated and selecting other new features to be activated. Thus, the updating cost may be related to amount of new features to be activated in the focus of attention.

  10. Numerical analysis of capillary compensated micropolar fluid lubricated hole-entry journal bearings

    Directory of Open Access Journals (Sweden)

    Nathi Ram

    2016-06-01

    Full Text Available The micropolar lubricated symmetric/asymmetric hole-entry bearings using capillary restrictor have been analyzed in the present work. Reynolds equation for micropolar lubricant has been derived and solved by FEM. The results have been computed using selected parameters of micropolar lubricant for hole-entry hydrostatic/hybrid journal bearings. A significant increase in damping and stiffness coefficients is observed for bearings having micropolar parameter N2=0.9, lm=10 than similar bearings under Newtonian lubricant. The threshold speed gets increased when symmetric bearing lubricated under micropolar fluid than Newtonian lubricant. The threshold speed gets increased when symmetric bearing lubricated under micropolar fluid than Newtonian lubricant.

  11. Ability of aphasic individuals to perform numerical processing and calculation tasks

    Directory of Open Access Journals (Sweden)

    Gabriela De Luccia

    2014-03-01

    Full Text Available Objective To compare performance on EC301 battery calculation task between aphasic subjects and normal controls of the same sex, age, and education. Method Thirty-two aphasic patients who had suffered a single left hemisphere stroke were evaluated. Forty-four healthy volunteers were also selected. All subjects underwent a comprehensive arithmetic battery to assess their numerical and calculation skills. Performances on numerical processing and calculation tasks were then analyzed. Results Aphasic individuals showed changes in their ability to perform numerical processing and calculation tasks that were not observed in the healthy population. Conclusion Compared with healthy subjects of the same age and education level, individuals with aphasia had difficulty performing various tasks that involved numerical processing and calculation.

  12. Negative priming in a numerical Piaget-like task as evidenced by ERP.

    Science.gov (United States)

    Daurignac, Elsa; Houdé, Olivier; Jouvent, Roland

    2006-05-01

    Inhibition is a key executive function in adults and children for the acquisition and expression of cognitive abilities. Using event-related potentials in a priming adaptation of a Piaget-like numerical task taken from developmental psychology, we report a negative priming effect in adults measured just after the cognitive inhibition of a misleading strategy, the visuospatial length-equals-number bias. This effect was determined in the N200 information processing stage through increased N200 amplitude. We show here that for accuracy in numerical quantification, the adult brain still had to control the child-like cognition biases that are stored in a kind of "developmental memory."

  13. Channelized relevance vector machine as a numerical observer for cardiac perfusion defect detection task

    Science.gov (United States)

    Kalayeh, Mahdi M.; Marin, Thibault; Pretorius, P. Hendrik; Wernick, Miles N.; Yang, Yongyi; Brankov, Jovan G.

    2011-03-01

    In this paper, we present a numerical observer for image quality assessment, aiming to predict human observer accuracy in a cardiac perfusion defect detection task for single-photon emission computed tomography (SPECT). In medical imaging, image quality should be assessed by evaluating the human observer accuracy for a specific diagnostic task. This approach is known as task-based assessment. Such evaluations are important for optimizing and testing imaging devices and algorithms. Unfortunately, human observer studies with expert readers are costly and time-demanding. To address this problem, numerical observers have been developed as a surrogate for human readers to predict human diagnostic performance. The channelized Hotelling observer (CHO) with internal noise model has been found to predict human performance well in some situations, but does not always generalize well to unseen data. We have argued in the past that finding a model to predict human observers could be viewed as a machine learning problem. Following this approach, in this paper we propose a channelized relevance vector machine (CRVM) to predict human diagnostic scores in a detection task. We have previously used channelized support vector machines (CSVM) to predict human scores and have shown that this approach offers better and more robust predictions than the classical CHO method. The comparison of the proposed CRVM with our previously introduced CSVM method suggests that CRVM can achieve similar generalization accuracy, while dramatically reducing model complexity and computation time.

  14. Mathematics anxiety reduces default mode network deactivation in response to numerical tasks

    Directory of Open Access Journals (Sweden)

    Belinda ePletzer

    2015-04-01

    Full Text Available Mathematics anxiety is negatively related to mathematics performance, thereby threatening the professional success. Preoccupation with the emotional content of the stimuli may consume working memory resources, which may be reflected in decreased deactivation of areas associated with the default mode network (DMN activated during self-referential and emotional processing. The common problem is that math anxiety is usually associated with poor math performance, so that any group differences are difficult to interpret.Here we compared the BOLD-response of 18 participants with high (HMAs and 18 participants with low mathematics anxiety (LMAs matched for their mathematical performance to two numerical tasks (number comparison, number bisection. During both tasks, we found stronger deactivation within the DMN in LMAs compared to HMAs, while BOLD-response in task-related activation areas did not differ between HMAs and LMAs. The difference in DMN deactivation between the HMA and LMA group was more pronounced in stimuli with additional requirement on inhibitory functions, but did not differ between number magnitude processing and arithmetic fact retrieval.

  15. Mathematics anxiety reduces default mode network deactivation in response to numerical tasks.

    Science.gov (United States)

    Pletzer, Belinda; Kronbichler, Martin; Nuerk, Hans-Christoph; Kerschbaum, Hubert H

    2015-01-01

    Mathematics anxiety is negatively related to mathematics performance, thereby threatening the professional success. Preoccupation with the emotional content of the stimuli may consume working memory resources, which may be reflected in decreased deactivation of areas associated with the default mode network (DMN) activated during self-referential and emotional processing. The common problem is that math anxiety is usually associated with poor math performance, so that any group differences are difficult to interpret. Here we compared the BOLD-response of 18 participants with high (HMAs) and 18 participants with low mathematics anxiety (LMAs) matched for their mathematical performance to two numerical tasks (number comparison, number bisection). During both tasks, we found stronger deactivation within the DMN in LMAs compared to HMAs, while BOLD-response in task-related activation areas did not differ between HMAs and LMAs. The difference in DMN deactivation between the HMA and LMA group was more pronounced in stimuli with additional requirement on inhibitory functions, but did not differ between number magnitude processing and arithmetic fact retrieval.

  16. Patterns of brain and cardiovascular activation while solving rule-discovery and rule-application numeric tasks.

    Science.gov (United States)

    Sosnowski, Tytus; Rynkiewicz, Andrzej; Wordecha, Małgorzata; Kępkowicz, Anna; Majewska, Adrianna; Pstrągowska, Aleksandra; Oleksy, Tomasz; Wypych, Marek; Marchewka, Artur

    2017-07-01

    It is known that solving mental tasks leads to tonic increase in cardiovascular activity. Our previous research showed that tasks involving rule application (RA) caused greater tonic increase in cardiovascular activity than tasks requiring rule discovery (RD). However, it is not clear what brain mechanisms are responsible for this difference. The aim of two experimental studies was to compare the patterns of brain and cardiovascular activity while both RD and the RA numeric tasks were being solved. The fMRI study revealed greater brain activation while solving RD tasks than while solving RA tasks. In particular, RD tasks evoked greater activation of the left inferior frontal gyrus and selected areas in the parietal, and temporal cortices, including the precuneus, supramarginal gyrus, angular gyrus, inferior parietal lobule, and the superior temporal gyrus, and the cingulate cortex. In addition, RA tasks caused larger increases in HR than RD tasks. The second study, carried out in a cardiovascular laboratory, showed greater increases in heart rate (HR), systolic blood pressure (SBP), diastolic blood pressure (DBP), and mean arterial pressure (MAP) while solving RA tasks than while solving RD tasks. The results support the hypothesis that RD and RA tasks involve different modes of information processing, but the neuronal mechanism responsible for the observed greater cardiovascular response to RA tasks than to RD tasks is not completely clear. Copyright © 2017. Published by Elsevier B.V.

  17. Age-related increase in brain activity during task-related and -negative networks and numerical inductive reasoning.

    Science.gov (United States)

    Sun, Li; Liang, Peipeng; Jia, Xiuqin; Qi, Zhigang; Li, Kuncheng

    2014-01-01

    Recent neuroimaging studies have shown that elderly adults exhibit increased and decreased activation on various cognitive tasks, yet little is known about age-related changes in inductive reasoning. To investigate the neural basis for the aging effect on inductive reasoning, 15 young and 15 elderly subjects performed numerical inductive reasoning while in a magnetic resonance (MR) scanner. Functional magnetic resonance imaging (fMRI) analysis revealed that numerical inductive reasoning, relative to rest, yielded multiple frontal, temporal, parietal, and some subcortical area activations for both age groups. In addition, the younger participants showed significant regions of task-induced deactivation, while no deactivation occurred in the elderly adults. Direct group comparisons showed that elderly adults exhibited greater activity in regions of task-related activation and areas showing task-induced deactivation (TID) in the younger group. Our findings suggest an age-related deficiency in neural function and resource allocation during inductive reasoning.

  18. Dual-task interference effects on cross-modal numerical order and sound intensity judgments: the more the louder?

    Science.gov (United States)

    Alards-Tomalin, Doug; Walker, Alexander C; Nepon, Hillary; Leboe-McGowan, Launa C

    2017-09-01

    In the current study, cross-task interactions between number order and sound intensity judgments were assessed using a dual-task paradigm. Participants first categorized numerical sequences composed of Arabic digits as either ordered (ascending, descending) or non-ordered. Following each number sequence, participants then had to judge the intensity level of a target sound. Experiment 1 emphasized processing the two tasks independently (serial processing), while Experiments 2 and 3 emphasized processing the two tasks simultaneously (parallel processing). Cross-task interference occurred only when the task required parallel processing and was specific to ascending numerical sequences, which led to a higher proportion of louder sound intensity judgments. In Experiment 4 we examined whether this unidirectional interaction was the result of participants misattributing enhanced processing fluency experienced on ascending sequences as indicating a louder target sound. The unidirectional finding could not be entirely attributed to misattributed processing fluency, and may also be connected to experientially derived conceptual associations between ascending number sequences and greater magnitude, consistent with conceptual mapping theory.

  19. Development of a stereolithography (STL input and computer numerical control (CNC output algorithm for an entry-level 3-D printer

    Directory of Open Access Journals (Sweden)

    Brown, Andrew

    2014-08-01

    Full Text Available This paper presents a prototype Stereolithography (STL file format slicing and tool-path generation algorithm, which serves as a data front-end for a Rapid Prototyping (RP entry- level three-dimensional (3-D printer. Used mainly in Additive Manufacturing (AM, 3-D printers are devices that apply plastic, ceramic, and metal, layer by layer, in all three dimensions on a flat surface (X, Y, and Z axis. 3-D printers, unfortunately, cannot print an object without a special algorithm that is required to create the Computer Numerical Control (CNC instructions for printing. An STL algorithm therefore forms a critical component for Layered Manufacturing (LM, also referred to as RP. The purpose of this study was to develop an algorithm that is capable of processing and slicing an STL file or multiple files, resulting in a tool-path, and finally compiling a CNC file for an entry-level 3- D printer. The prototype algorithm was implemented for an entry-level 3-D printer that utilises the Fused Deposition Modelling (FDM process or Solid Freeform Fabrication (SFF process; an AM technology. Following an experimental method, the full data flow path for the prototype algorithm was developed, starting with STL data files, and then processing the STL data file into a G-code file format by slicing the model and creating a tool-path. This layering method is used by most 3-D printers to turn a 2-D object into a 3-D object. The STL algorithm developed in this study presents innovative opportunities for LM, since it allows engineers and architects to transform their ideas easily into a solid model in a fast, simple, and cheap way. This is accomplished by allowing STL models to be sliced rapidly, effectively, and without error, and finally to be processed and prepared into a G-code print file.

  20. Flanking Magnitudes: Dissociation between Numerosity and Numerical Value in a Selective Attention Task

    Science.gov (United States)

    Naparstek, Sharon; Safadi, Ziad; Lichtenstein-Vidne, Limor; Henik, Avishai

    2015-01-01

    The current research examined whether peripherally presented numerical information can affect the speed of number processing. In 2 experiments, participants were presented with a target matrix flanked by a distractor matrix and were asked to perform a comparative judgment (i.e., decide whether the target was larger or smaller than the reference…

  1. Numerical

    Directory of Open Access Journals (Sweden)

    M. Boumaza

    2015-07-01

    Full Text Available Transient convection heat transfer is of fundamental interest in many industrial and environmental situations, as well as in electronic devices and security of energy systems. Transient fluid flow problems are among the more difficult to analyze and yet are very often encountered in modern day technology. The main objective of this research project is to carry out a theoretical and numerical analysis of transient convective heat transfer in vertical flows, when the thermal field is due to different kinds of variation, in time and space of some boundary conditions, such as wall temperature or wall heat flux. This is achieved by the development of a mathematical model and its resolution by suitable numerical methods, as well as performing various sensitivity analyses. These objectives are achieved through a theoretical investigation of the effects of wall and fluid axial conduction, physical properties and heat capacity of the pipe wall on the transient downward mixed convection in a circular duct experiencing a sudden change in the applied heat flux on the outside surface of a central zone.

  2. Advanced Physical Models and Numerical Algorithms to Enable High-Fidelity Aerothermodynamic Simulations of Planetary Entry Vehicles on Emerging Distributed Heterogeneous Computing Architectures

    Data.gov (United States)

    National Aeronautics and Space Administration — The design and qualification of entry systems for planetary exploration largely rely on computational simulations. However, state-of-the-art modeling capabilities...

  3. Similarity-based interference in a working memory numerical updating task: age-related differences between younger and older adults.

    Science.gov (United States)

    Pelegrina, Santiago; Borella, Erika; Carretti, Barbara; Lechuga, M Teresa

    2012-01-01

    Similarity among representations held simultaneously in working memory (WM) is a factor which increases interference and hinders performance. The aim of the current study was to investigate age-related differences between younger and older adults in a working memory numerical updating task, in which the similarity between information held in WM was manipulated. Results showed a higher susceptibility of older adults to similarity-based interference when accuracy, and not response times, was considered. It was concluded that older adults' WM difficulties appear to be due to the availability of stored information, which, in turn, might be related to the ability to generate distinctive representations and to the process of binding such representations to their context when similar information has to be processed in WM.

  4. Analytical and numerical models for estimating the effect of exhaust ventilation on radon entry in houses with basements or crawl spaces

    International Nuclear Information System (INIS)

    Mowris, R.J.

    1986-08-01

    Mechanical exhaust ventilation systems are being installed in newer, energy-efficient houses and their operation can increase the indoor-outdoor pressure differences that drive soil gas and thus radon entry. This thesis presents simplified models for estimating the pressure driven flow of radon into houses with basements or crawl spaces, due to underpressures induced by indoor-outdoor temperature differences, wind, or exhaust ventilation. A two-dimensional finite difference model is presented and used to calculate the pressure field and soil gas flow rate into a basement situated in soil of uniform permeability. A simplified analytical model is compared to the finite difference model with generally very good agreement. Another simplified model is presented for houses with a crawl space. Literature on radon research is also reviewed to show why pressure driven flow of soil gas is considered to be the major source of radon entry in houses with higher-than-average indoor radon concentrations. Comparisons of measured vs. calculated indoor radon concentrations for a house with a basement showed the simplified basement model underpredicting on average by 25%. For a house with a crawl space the simplified crawl space model overpredicted by 23% when the crawl space vents are open and 48% when the crawl space vents are sealed

  5. Project Fog Drops 5. Task 1: A numerical model of advection fog. Task 2: Recommendations for simplified individual zero-gravity cloud physics experiments

    Science.gov (United States)

    Rogers, C. W.; Eadie, W. J.; Katz, U.; Kocmond, W. C.

    1975-01-01

    A two-dimensional numerical model was used to investigate the formation of marine advection fog. The model predicts the evolution of potential temperature, horizontal wind, water vapor content, and liquid water content in a vertical cross section of the atmosphere as determined by vertical turbulent transfer and horizontal advection, as well as radiative cooling and drop sedimentation. The model is designed to simulate the formation, development, or dissipation of advection fog in response to transfer of heat and moisture between the atmosphere and the surface as driven by advection over horizontal discontinuities in the surface temperature. Results from numerical simulations of advection fog formation are discussed with reference to observations of marine fog. A survey of candidate fog or cloud microphysics experiments which might be performed in the low gravity environment of a shuttle-type spacecraft in presented. Recommendations are given for relatively simple experiments which are relevent to fog modification problems.

  6. Project Analysis of Aerodynamics Configuration of Re-entry Сapsule-shaped Body Based on Numerical Methods for Newtonian Flow Theory

    Directory of Open Access Journals (Sweden)

    V. E. Minenko

    2015-01-01

    Full Text Available The article objective is to review the basic design parameters of space capsule (SC to select a rational shape at the early stages of design.The choice is based on the design parameters such as a volume filling factor (volumetric efficiency of shape, aerodynamic coefficients, margin of stability, and centering characteristics.The aerodynamic coefficients are calculated by a numerical method based on approximate Newton's theory. A proposed engineering technique uses this theory to calculate aerodynamic characteristics of the capsule shapes. The gist of the technique is in using a developed programme to generate capsule shapes and provide numerical calculation of aerodynamic characteristics. The accuracy of the calculation, performed according to proposed technique, tends to the results obtained by analytical integral dependencies according to the Newtonian technique.When considering the stability of the capsule shapes the paper gives a diagram of the aerodynamic forces acting on the SC in the descent phase, and using the aerodynamically-shaped SC "Soyuz" as an example analyses a dangerous moment of flow at adverse angles of attack.After determining a design center-of-mass position to meet the stability requirements it is necessary at the early stage, before starting the SC layout work, to evaluate the complexity of bringing the center-of-mass to the specified point. In this regard have been considered such design parameters of the shape as a volume-centering and surface-centering coefficients.Next, using the above engineering technique are calculated aerodynamic characteristics of capsule shapes similar to the well-known SC "Soyuz", "Zarya 2" and the command module "Apollo".All calculated design parameters are summarized in the table. Currently, among the works cited in foreign publications concerning the contours of winged configuration of the type "Space Shuttle" some papers are close to the proposed technique.Application of the proposed

  7. Texting while driving: is speech-based text entry less risky than handheld text entry?

    Science.gov (United States)

    He, J; Chaparro, A; Nguyen, B; Burge, R J; Crandall, J; Chaparro, B; Ni, R; Cao, S

    2014-11-01

    Research indicates that using a cell phone to talk or text while maneuvering a vehicle impairs driving performance. However, few published studies directly compare the distracting effects of texting using a hands-free (i.e., speech-based interface) versus handheld cell phone, which is an important issue for legislation, automotive interface design and driving safety training. This study compared the effect of speech-based versus handheld text entries on simulated driving performance by asking participants to perform a car following task while controlling the duration of a secondary text-entry task. Results showed that both speech-based and handheld text entries impaired driving performance relative to the drive-only condition by causing more variation in speed and lane position. Handheld text entry also increased the brake response time and increased variation in headway distance. Text entry using a speech-based cell phone was less detrimental to driving performance than handheld text entry. Nevertheless, the speech-based text entry task still significantly impaired driving compared to the drive-only condition. These results suggest that speech-based text entry disrupts driving, but reduces the level of performance interference compared to text entry with a handheld device. In addition, the difference in the distraction effect caused by speech-based and handheld text entry is not simply due to the difference in task duration. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. US Ports of Entry

    Data.gov (United States)

    Department of Homeland Security — HSIP Non-Crossing Ports-of-Entry A Port of Entry is any designated place at which a CBP officer is authorized to accept entries of merchandise to collect duties, and...

  9. Entry and exit decisions under uncertainty

    DEFF Research Database (Denmark)

    Kongsted, Hans Christian

    1996-01-01

    This paper establishes the general deterministic limit that corresponds to Dixit's model of entry and exit decisions under uncertainty. The interlinked nature of decisions is shown to be essential also in the deterministic limit. A numerical example illustrates the result......This paper establishes the general deterministic limit that corresponds to Dixit's model of entry and exit decisions under uncertainty. The interlinked nature of decisions is shown to be essential also in the deterministic limit. A numerical example illustrates the result...

  10. Adaptive Text Entry for Mobile Devices

    DEFF Research Database (Denmark)

    Proschowsky, Morten Smidt

    The reduced size of many mobile devices makes it difficult to enter text with them. The text entry methods are often slow or complicated to use. This affects the performance and user experience of all applications and services on the device. This work introduces new easy-to-use text entry methods...... for mobile devices and a framework for adaptive context-aware language models. Based on analysis of current text entry methods, the requirements to the new text entry methods are established. Transparent User guided Prediction (TUP) is a text entry method for devices with one dimensional touch input. It can...... be touch sensitive wheels, sliders or similar input devices. The interaction design of TUP is done with a combination of high level task models and low level models of human motor behaviour. Three prototypes of TUP are designed and evaluated by more than 30 users. Observations from the evaluations are used...

  11. Jesus' Entry into Jerusalem

    Directory of Open Access Journals (Sweden)

    Juho Sankamo

    2014-12-01

    Full Text Available This article intends to contribute to the understanding of Jesus’ entry into Jerusalem. The author studies the entry, which is found in all the Gospels, in its Jewish context. The author argues that Jesus’ entry into Jerusalem on an ass is to be understood as a prophetic sign which was primarily meant to convey a message to the Jews.

  12. ELECTRA © Launch and Re-Entry Safety Analysis Tool

    Science.gov (United States)

    Lazare, B.; Arnal, M. H.; Aussilhou, C.; Blazquez, A.; Chemama, F.

    2010-09-01

    French Space Operation Act gives as prime objective to National Technical Regulations to protect people, properties, public health and environment. In this frame, an independent technical assessment of French space operation is delegated to CNES. To perform this task and also for his owns operations CNES needs efficient state-of-the-art tools for evaluating risks. The development of the ELECTRA© tool, undertaken in 2007, meets the requirement for precise quantification of the risks involved in launching and re-entry of spacecraft. The ELECTRA© project draws on the proven expertise of CNES technical centers in the field of flight analysis and safety, spaceflight dynamics and the design of spacecraft. The ELECTRA© tool was specifically designed to evaluate the risks involved in the re-entry and return to Earth of all or part of a spacecraft. It will also be used for locating and visualizing nominal or accidental re-entry zones while comparing them with suitable geographic data such as population density, urban areas, and shipping lines, among others. The method chosen for ELECTRA© consists of two main steps: calculating the possible reentry trajectories for each fragment after the spacecraft breaks up; calculating the risks while taking into account the energy of the fragments, the population density and protection afforded by buildings. For launch operations and active re-entry, the risk calculation will be weighted by the probability of instantaneous failure of the spacecraft and integrated for the whole trajectory. ELECTRA©’s development is today at the end of the validation phase, last step before delivery to users. Validation process has been performed in different ways: numerical application way for the risk formulation; benchmarking process for casualty area, level of energy of the fragments entries and level of protection housing module; best practices in space transportation industries concerning dependability evaluation; benchmarking process for

  13. Double entry bookkeeping vs single entry bookkeeping

    Directory of Open Access Journals (Sweden)

    Ileana Andreica

    2016-11-01

    Full Text Available Abstract: A financial management eficiently begin, primarily, with an accounting record kept in the best possible conditions, this being conditioned on the adoption of a uniform forms, rational, clear and simple accounting. Throughout history, there have been known two forms of accounting: the simple and double entry. Romanian society after 1990 underwent a substantial change in social structure, the sector on which put a great emphasis being private, that of small manufacturers, peddler, freelance, who work independently and authorized or as associative form (family enterprises, various associations (owners, tenants, etc., liberal professions, etc.. They are obliged to keep a simple bookkeeping, because they have no juridical personality. Companies with legal personality are required to keep double entry bookkeeping; therefore, knowledge and border demarcation between the two forms of organisation of accounting is an essential. The material used for this work is mainly represented by the financial and accounting documents, by the analysis of the economic, by legislative updated sources, and as the method was used the comparison method, using hypothetical data, in case of an authorized individual and a legal entity. Based on the chosen material, an authorized individual (who perform single entry accounting system and a juridical entity (who perform double entry accounting system were selected comparative case studies, using hypothetical data, were analysed advantages and disadvantages in term of fiscal, if using two accounting systems, then were highlighted some conclusion that result.

  14. Double entry bookkeeping vs single entry bookkeeping

    OpenAIRE

    Ileana Andreica

    2016-01-01

    Abstract: A financial management eficiently begin, primarily, with an accounting record kept in the best possible conditions, this being conditioned on the adoption of a uniform forms, rational, clear and simple accounting. Throughout history, there have been known two forms of accounting: the simple and double entry. Romanian society after 1990 underwent a substantial change in social structure, the sector on which put a great emphasis being private, that of small manufacturers, ped...

  15. Border Crossing Entry Data

    Data.gov (United States)

    Department of Transportation — The Bureau of Transportation Statistics (BTS) Border Crossing/Entry Data provides summary statistics for inbound crossings at the U.S.-Canadian and the U.S.-Mexican...

  16. Models of radon entry: A review

    International Nuclear Information System (INIS)

    Gadgil, A.J.

    1991-08-01

    This paper reviews existing models of radon entry into houses. The primary mechanism of radon entry in houses with high indoor concentrations is, in most cases, convective entry of radon bearing soil-gas from the surrounding soil. The driving force for this convective entry is the small indoor-outdoor pressure difference arising from the stack effect and other causes. Entry points for the soil-gas generally are the cracks or gaps in the building substructure, or though other parts of the building shell in direct contact with the soil, although entry may also occur by flow though permeable concrete or cinder block walls of the substructure. Models using analytical solutions to idealized geometrical configurations with simplified boundary conditions obtain analytical tractability of equations to be solved at the cost of severe approximations; their strength is in the insights they offer with their solutions. Models based on lumped parameters attempt to characterize the significant physical behavioral characteristics of the soil-gas and radon flow. When realistic approximations are desired for the boundary conditions and terms in the governing equations, numerical models must be used; these are usually based on finite difference or finite element solutions to the governing equations. Limited data are now available for experimental verification of model predictions. The models are briefly reviewed and their strengths and limitations are discussed

  17. Analysis and Optimization of Entry Stability in Underground Longwall Mining

    Directory of Open Access Journals (Sweden)

    Yubing Gao

    2017-11-01

    Full Text Available For sustainable utilization of limited coal resources, it is important to increase the coal recovery rate and reduce mine accidents, especially those occurring in the entry (gateroad. Entry stabilities are vital for ventilation, transportation and other essential services in underground coal mining. In the present study, a finite difference model was built to investigate stress evolutions around the entry, and true triaxial tests were carried out at the laboratory to explore entry wall stabilities under different mining conditions. The modeling and experimental results indicated that a wide coal pillar was favorable for entry stabilities, but oversize pillars caused a serious waste of coal resources. As the width of the entry wall decreased, the integrated vertical stress, induced by two adjacent mining panels, coupled with each other and experienced an increase on the entry wall, which inevitably weakened the stability of the entry. Therefore, mining with coal pillars always involves a tradeoff between economy and safety. To address this problem, an innovative non-pillar mining technique by optimizing the entry surrounding structures was proposed. Numerical simulation showed that the deformation of the entry roof decreased by approximately 66% after adopting the new approach, compared with that using the conventional mining method. Field monitoring indicated that the stress condition of the entry was significantly improved and the average roof pressure decreased by appropriately 60.33% after adopting the new technique. This work provides an economical and effective approach to achieve sustainable exploitation of underground coal resources.

  18. Entry and Exit.

    Science.gov (United States)

    1987-03-01

    1. Introduction R Analyses of industrial competition have attained a new vigor with the application of game -theoretic methods. The process of... competition is represented in models that reflect genuine struggles for entry, market power, and continuing survival. Dynamics and informational effects are...presents a few of the models developed recently to study competitive processes that affect a firm’s entry into a market , and the decision to exit. The

  19. Automated Re-Entry System using FNPEG

    Science.gov (United States)

    Johnson, Wyatt R.; Lu, Ping; Stachowiak, Susan J.

    2017-01-01

    This paper discusses the implementation and simulated performance of the FNPEG (Fully Numerical Predictor-corrector Entry Guidance) algorithm into GNC FSW (Guidance, Navigation, and Control Flight Software) for use in an autonomous re-entry vehicle. A few modifications to FNPEG are discussed that result in computational savings -- a change to the state propagator, and a modification to cross-range lateral logic. Finally, some Monte Carlo results are presented using a representative vehicle in both a high-fidelity 6-DOF (degree-of-freedom) sim as well as in a 3-DOF sim for independent validation.

  20. Entry: direct control or regulation?

    NARCIS (Netherlands)

    Perotti, E.; Vorage, M.

    2009-01-01

    We model a setting in which citizens form coalitions to seek preferential entry to a given market. The lower entry the higher firm profits and political contributions, but the lower social welfare. Politicians choose to either control entry directly and be illegally bribed, or regulate entry using a

  1. Quick look report, Entry 3: Three Mile Island Unit 2, October 16, 1980

    International Nuclear Information System (INIS)

    1981-07-01

    This report summarizes tasks performed during the third entry at Three Mile Island Unit 2. During the entry into containment, which was made on October 16, 1980, additional beta, gamma, and neutron surveys were performed to supplement data obtained on previous entries. In addition, several maintenance tasks were completed including testing the operation of both equipment hatch doors, replacing a loose parts monitor system pre-amplifier, and removing a source range monitor. The five-man entry team accomplished these tasks in about 1-1/2 hours

  2. Exclusive Dealing and Entry

    OpenAIRE

    João Leão

    2008-01-01

    This paper examines the use of exclusive dealing agreements to prevent the entry of rival firms. An exclusive dealing agreement is a contract between a buyer and a seller where the buyer commits to buy a good exclusively from the seller. One main concern of the literature is to explain how an incumbent seller is able to persuade the buyers to sign an exclusive dealing agreement that deters the entry of a more efficient rival seller. We propose a new explanation when the buyers are downstream ...

  3. Lobbying on entry

    NARCIS (Netherlands)

    Perotti, E.C.; Volpin, P.

    2004-01-01

    We develop a model of endogenous lobby formation in which wealth inequality and political accountability undermine entry and financial development. Incumbents seek a low level of effective investor protection to prevent potential entrants from raising capital. They succeed because they can promise

  4. Atmospheric Entry Studies for Uranus

    Science.gov (United States)

    Agrawal, P.; Allen, G. A.; Hwang, H. H.; Marley, M. S.; McGuire, M. K.; Garcia, J. A.; Sklyanskiy, E.; Huynh, L. C.; Moses, R. W.

    2014-07-01

    To better understand the technology requirements for Uranus atmospheric entry probe, Entry Vehicle Technology project funded an internal study with a multidisciplinary team from NASA Ames, Langley and JPL. The results of this study are communicated.

  5. Border Crossing/Entry Data

    Data.gov (United States)

    Department of Transportation — The dataset is known as “Border Crossing/Entry Data.” The Bureau of Transportation Statistics (BTS) Border Crossing/Entry Data provides summary statistics to the...

  6. Summary analysis of the Gemini entry aerodynamics

    Science.gov (United States)

    Whitnah, A. M.; Howes, D. B.

    1972-01-01

    The aerodynamic data that were derived in 1967 from the analysis of flight-generated data for the Gemini entry module are presented. These data represent the aerodynamic characteristics exhibited by the vehicle during the entry portion of Gemini 2, 3, 5, 8, 10, 11, and 12 missions. For the Gemini, 5, 8, 10, 11, and 12 missions, the flight-generated lift-to-drag ratios and corresponding angles of attack are compared with the wind tunnel data. These comparisons show that the flight generated lift-to-drag ratios are consistently lower than were anticipated from the tunnel data. Numerous data uncertainties are cited that provide an insight into the problems that are related to an analysis of flight data developed from instrumentation systems, the primary functions of which are other than the evaluation of flight aerodynamic performance.

  7. Representation of Numerical and Non-Numerical Order in Children

    Science.gov (United States)

    Berteletti, Ilaria; Lucangeli, Daniela; Zorzi, Marco

    2012-01-01

    The representation of numerical and non-numerical ordered sequences was investigated in children from preschool to grade 3. The child's conception of how sequence items map onto a spatial scale was tested using the Number-to-Position task (Siegler & Opfer, 2003) and new variants of the task designed to probe the representation of the alphabet…

  8. Dividing attention between tasks : Testing whether explicit payoff functions elicit optimal dual-task performance

    NARCIS (Netherlands)

    Farmer, George D.; Janssen, C.P.|info:eu-repo/dai/nl/412781654; Nguyen, Anh T; Brumby, Duncan P.

    2018-01-01

    We test people's ability to optimize performance across two concurrent tasks. Participants performed a number entry task while controlling a randomly moving cursor with a joystick. Participants received explicit feedback on their performance on these tasks in the form of a single combined score.

  9. Assessing the Usability of Six Data Entry Mobile Interfaces for Caregivers: A Randomized Trial.

    Science.gov (United States)

    Ehrler, Frederic; Haller, Guy; Sarrey, Evelyne; Walesa, Magali; Wipfli, Rolf; Lovis, Christian

    2015-12-15

    There is an increased demand in hospitals for tools, such as dedicated mobile device apps, that enable the recording of clinical information in an electronic format at the patient's bedside. Although the human-machine interface design on mobile devices strongly influences the accuracy and effectiveness of data recording, there is still a lack of evidence as to which interface design offers the best guarantee for ease of use and quality of recording. Therefore, interfaces need to be assessed both for usability and reliability because recording errors can seriously impact the overall level of quality of the data and affect the care provided. In this randomized crossover trial, we formally compared 6 handheld device interfaces for both speed of data entry and accuracy of recorded information. Three types of numerical data commonly recorded at the patient's bedside were used to evaluate the interfaces. In total, 150 health care professionals from the University Hospitals of Geneva volunteered to record a series of randomly generated data on each of the 6 interfaces provided on a smartphone. The interfaces were presented in a randomized order as part of fully automated data entry scenarios. During the data entry process, accuracy and effectiveness were automatically recorded by the software. Various types of errors occurred, which ranged from 0.7% for the most reliable design to 18.5% for the least reliable one. The length of time needed for data recording ranged from 2.81 sec to 14.68 sec, depending on the interface. The numeric keyboard interface delivered the best performance for pulse data entry with a mean time of 3.08 sec (SD 0.06) and an accuracy of 99.3%. Our study highlights the critical impact the choice of an interface can have on the quality of recorded data. Selecting an interface should be driven less by the needs of specific end-user groups or the necessity to facilitate the developer's task (eg, by opting for default solutions provided by commercial

  10. Advertising and generic market entry.

    Science.gov (United States)

    Königbauer, Ingrid

    2007-03-01

    The effect of purely persuasive advertising on generic market entry and social welfare is analysed. An incumbent has the possibility to invest in advertising which affects the prescribing physician's perceived relative qualities of the brand-name and the generic version of the drug. Advertising creates product differentiation and can induce generic market entry which is deterred without differentiation due to strong Bertrand competition. However, over-investment in advertising can deter generic market entry under certain conditions and reduces welfare as compared to accommodated market entry.

  11. Entry-Control Systems Handbook

    International Nuclear Information System (INIS)

    1978-09-01

    The function of an entry-control system in a total Physical Protection System is to allow the movement of authorized personnel and material through normal access routes, yet detect and delay unauthorized movement of personnel and material from uncontrolled areas. The ten chapters of this handbook cover: introduction, credentials, personnel identity verification systems, special nuclear materials monitors, metal detectors, explosives sensors, package search systems, criteria for selection of entry-control equipment, machine-aided manual entry-control systems, and automated entry-control systems. A system example and its cost are included as an appendix

  12. Determining Data Entry Points For Javascript-rich Web applications

    Directory of Open Access Journals (Sweden)

    George Maksimovich Noseevich

    2013-02-01

    Full Text Available The paper is devoted the task of automatic crawling of javascript-rich web applications for data entry points. A new technique is proposed, which combines dynamic and static javascript code analysis. Testing the proposed technique on real world web applications such as Twitter, Youtube and Reddit has confirmed its applicability for analysis of modern web applications.

  13. Aerothermodynamics of blunt body entry vehicles

    Science.gov (United States)

    Hollis, Brian R.; Borrelli, Salvatore

    2012-01-01

    In this chapter, the aerothermodynamic phenomena of blunt body entry vehicles are discussed. Four topics will be considered that present challenges to current computational modeling techniques for blunt body environments: turbulent flow, non-equilibrium flow, rarefied flow, and radiation transport. Examples of comparisons between computational tools to ground and flight-test data will be presented in order to illustrate the challenges existing in the numerical modeling of each of these phenomena and to provide test cases for evaluation of computational fluid dynamics (CFD) code predictions.

  14. Spacecraft Demand Tasking and Skip Entry Responsive Maneuvers

    Science.gov (United States)

    2011-06-01

    geomagnetic -induced variations in density and temperature arising due to the solar cycle and related space weather phenomena. As a result, the...perfectly elastic…the tangential velocity is constant and the normal velocity is reversed ,” whereas diffuse collusions are composed of air molecules...Th_first_vec3(:,2) ) set(gca,’XDir’,’ reverse ’) legend(’\\itL/D\\rm =1.0’,’\\itL/D\\rm =1.5’,’\\itL/D\\rm =2.0’,’Location’,’Southwest’); title(’Minimum

  15. Efficient Numerical Methods for Nonequilibrium Re-Entry Flows

    Science.gov (United States)

    2014-01-14

    right-hand side is the only quadratic operation). The number of sub- iterations , kmax, used in this update needs to be chosen for optimal convergence and...Upper Symmetric Gauss - Seidel Method for the Euler and Navier-Stokes Equations,”, AIAA Journal, Vol. 26, No. 9, pp. 1025-1026, Sept. 1988. 11Edwards, J.R...Candler, “The Solution of the Navier-Stokes Equations Using Gauss - Seidel Line Relaxation,” Computers and Fluids, Vol. 17, No. 1, pp. 135-150, 1989

  16. The Onset of Representation and Entry into Stage 6 of Object Permanence Development

    Science.gov (United States)

    Campos, Joseph J.; Ramsay, Douglas S.

    1978-01-01

    Attempts to determine whether infants' performance in two search tasks is related to their entry into Stage 6 of object permanence development (thereby testing Piaget's claim that only Stage 6 infants possess the capacity for representation). (BD)

  17. Instrument Formatting with Computer Data Entry in Mind.

    Science.gov (United States)

    Boser, Judith A.; And Others

    Different formats for four types of research items were studied for ease of computer data entry. The types were: (1) numeric response items; (2) individual multiple choice items; (3) multiple choice items with the same response items; and (4) card column indicator placement. Each of the 13 experienced staff members of a major university's Data…

  18. Entry Threat and Entry Deterrence: The Timing of Broadband Rollout

    OpenAIRE

    Mo Xiao; Peter F. Orazem

    2007-01-01

    Past empirical literature provides strong evidence that competition increases when new firms enter a market. However, rarely have economists been able to examine how competition changes with the threat of entry. This paper uses the evolution of the zip code level market structure of facilities-based broadband providers from 1999 to 2004 to investigate how a firm adjusts its entry strategy when facing the threat of additional entrants. We identify the potential entrant into a local market as t...

  19. Quick look report, entry 4: Three Mile Island Unit 2, November 13, 1980

    International Nuclear Information System (INIS)

    Eidam, G.E.

    1981-06-01

    This report summarizes tasks performed during entry 4 at Three Mile Island Unit 2. During the entry into containment, which was made on November 13, 1980, additional beta and gamma surveys were conducted to supplement data acquired on previous entries. A decontamination test was completed on Elevation 305. Power receptables tested on Elevation 305 were deenergized, but receptacles on Elevation 347 were energized. Still photography was acquired of Elevations 305 and 347. During the entry, 86 still photographs were taken. Videotaping (color and black and white) was done on Elevations 305 and 347, but lighting on both elevations was insufficient for high-quality video

  20. Corporate Author Entries. Revision 5

    International Nuclear Information System (INIS)

    Hendricks, P.L.

    1986-05-01

    This reference authority has been created and is maintained to provide standard forms for recording the names of organizations consistently in bibliographic citations. This revision includes approximately 42,000 entries established since 1973

  1. Exploiting Herpes Simplex Virus Entry for Novel Therapeutics

    Directory of Open Access Journals (Sweden)

    Deepak Shukla

    2013-06-01

    Full Text Available Herpes Simplex virus (HSV is associated with a variety of diseases such as genital herpes and numerous ocular diseases. At the global level, high prevalence of individuals who are seropositive for HSV, combined with its inconspicuous infection, remains a cause for major concern. At the molecular level, HSV entry into a host cell involves multiple steps, primarily the interaction of viral glycoproteins with various cell surface receptors, many of which have alternate substitutes. The molecular complexity of the virus to enter a cell is also enhanced by the existence of different modes of viral entry. The availability of many entry receptors, along with a variety of entry mechanisms, has resulted in a virus that is capable of infecting virtually all cell types. While HSV uses a wide repertoire of viral and host factors in establishing infection, current therapeutics aimed against the virus are not as diversified. In this particular review, we will focus on the initial entry of the virus into the cell, while highlighting potential novel therapeutics that can control this process. Virus entry is a decisive step and effective therapeutics can translate to less virus replication, reduced cell death, and detrimental symptoms.

  2. Network Competition and Entry Deterrence

    OpenAIRE

    Calzada, Joan; Valletti, Tommaso

    2005-01-01

    We develop a model of logit demand that extends to a multi-firm industry the traditional duopoly framework of network competition with access charges. Firstly, we show that, when incumbents do not face the threat of entry and compete in prices, they inefficiently establish the reciprocal access charge below cost. This inefficiency disappears if incumbents compete in utilities instead of prices. Secondly, we study how incumbents change their choices under the threat of entry when they determin...

  3. Currency union entries and trade

    OpenAIRE

    Nitsch, Volker

    2005-01-01

    Recent research suggests that adopting a common currency increases bilateral trade. In this paper, I explore experiences of currency union entry in the post-war period and find no effect on trade. Previous results derived from a large panel data set (covering more than 200 countries from 1948 through 1997) appear to depend crucially on the assumption of symmetry between currency union exits and entries: While countries leaving a currency union experience significant declines in trade, currenc...

  4. Numerical relativity

    International Nuclear Information System (INIS)

    Piran, T.

    1982-01-01

    There are many recent developments in numerical relativity, but there remain important unsolved theoretical and practical problems. The author reviews existing numerical approaches to solution of the exact Einstein equations. A framework for classification and comparison of different numerical schemes is presented. Recent numerical codes are compared using this framework. The discussion focuses on new developments and on currently open questions, excluding a review of numerical techniques. (Auth.)

  5. Entry of soil gas and radon into houses

    International Nuclear Information System (INIS)

    Andersen, C.E.

    1992-04-01

    Entry of soil gas and radon into houses has been investigated by experiments conducted at radon test structures and numerical or analytical modelling. The numerical model solves the steady-state equations for Darcy flow of soil-gas and combined diffusive and advective transport of radon. Model calculations were compared with results from field experiments conducted at Risoe National Laboratory, and it was found that there was good agreement between measured and modelled pressure coupling and radon concentration profiles. Discrepancies regarding absolute values of soil-gas entry rates and radon concentrations were observed. The numerical model has been used to study the importance of soil and building related factors on radon entry rates into slab-on-grade houses. It was found that, for a house with a 3 mm perimeter crack along the floor-wall joint, the entry was mainly determined by the soil permeability and building related factors such as house depressurization and presence of a capillary breaking layer of gravel below the slab. In a house with a bare soil floor, the diffusivity of the soil was found to be of principal importance for the entry rate even for moderate permeabilities. An analytical model was developed for the purpose of studying soil-gas entry rates into houses in response to non-static driving forces. It is based on the analogy between a 'buried drain' and a basement house with a perimeter crack. The structure was depressurized sinusoidally in time and the frequency dependent pressure couplings were measured. There was fairly good agreement between theoretical and experimental results. (LN) (26 tabs., 30 ills., 66 refs.)

  6. Numerical Estimation in Preschoolers

    Science.gov (United States)

    Berteletti, Ilaria; Lucangeli, Daniela; Piazza, Manuela; Dehaene, Stanislas; Zorzi, Marco

    2010-01-01

    Children's sense of numbers before formal education is thought to rely on an approximate number system based on logarithmically compressed analog magnitudes that increases in resolution throughout childhood. School-age children performing a numerical estimation task have been shown to increasingly rely on a formally appropriate, linear…

  7. Text Entry by Gazing and Smiling

    Directory of Open Access Journals (Sweden)

    Outi Tuisku

    2013-01-01

    Full Text Available Face Interface is a wearable prototype that combines the use of voluntary gaze direction and facial activations, for pointing and selecting objects on a computer screen, respectively. The aim was to investigate the functionality of the prototype for entering text. First, three on-screen keyboard layout designs were developed and tested (n=10 to find a layout that would be more suitable for text entry with the prototype than traditional QWERTY layout. The task was to enter one word ten times with each of the layouts by pointing letters with gaze and select them by smiling. Subjective ratings showed that a layout with large keys on the edge and small keys near the center of the keyboard was rated as the most enjoyable, clearest, and most functional. Second, using this layout, the aim of the second experiment (n=12 was to compare entering text with Face Interface to entering text with mouse. The results showed that text entry rate for Face Interface was 20 characters per minute (cpm and 27 cpm for the mouse. For Face Interface, keystrokes per character (KSPC value was 1.1 and minimum string distance (MSD error rate was 0.12. These values compare especially well with other similar techniques.

  8. Mars Atmospheric Entry Integrated Navigation with Partial Intermittent Measurements

    Directory of Open Access Journals (Sweden)

    Tai-shan Lou

    2017-01-01

    Full Text Available Signal degradation suffered by the vehicle is a combination brownout and blackout during Mars atmospheric entry. The communications brownout means that signal fades and blackout means that the signal is lost completely. The communications brownout and blackout periods are analyzed and predicted with an altitude and velocity profiles. In the brownout period, the range measurements between the vehicle and the orbiters are modeled as intermittent measurements with the radio signal arrival probabilities, which are distributed as a Rayleigh distribution of the electron number density around the entry vehicle. A new integrated navigation strategy during the Mars atmospheric entry phase is proposed to consider the probabilities of the radio measurements in the communications brownout and blackout periods under the IMU/beacon scenario based on the information filter with intermittent measurements. Numerical navigation simulations are designed to show the performance of the proposed navigation strategy under the integrated navigation scenario.

  9. Numerical analysis

    CERN Document Server

    Khabaza, I M

    1960-01-01

    Numerical Analysis is an elementary introduction to numerical analysis, its applications, limitations, and pitfalls. Methods suitable for digital computers are emphasized, but some desk computations are also described. Topics covered range from the use of digital computers in numerical work to errors in computations using desk machines, finite difference methods, and numerical solution of ordinary differential equations. This book is comprised of eight chapters and begins with an overview of the importance of digital computers in numerical analysis, followed by a discussion on errors in comput

  10. Numerical relativity

    CERN Document Server

    Shibata, Masaru

    2016-01-01

    This book is composed of two parts: First part describes basics in numerical relativity, that is, the formulations and methods for a solution of Einstein's equation and general relativistic matter field equations. This part will be helpful for beginners of numerical relativity who would like to understand the content of numerical relativity and its background. The second part focuses on the application of numerical relativity. A wide variety of scientific numerical results are introduced focusing in particular on the merger of binary neutron stars and black holes.

  11. Automated entry technologies for confined space work activities: A survey.

    Science.gov (United States)

    Botti, Lucia; Ferrari, Emilio; Mora, Cristina

    2017-04-01

    Work in confined spaces poses a significant risk to workers and rescuers involved in the emergency response when an accident occurs. Despite several standards and regulations define the safety requirements for such activities, injuries, and fatalities still occur. Furthermore, the on-site inspections after accidents often reveal that both employers and employees fail to implement safe entry procedures. Removing the risk is possible by avoiding the worker entry, but many activities require the presence of the operator inside the confined space to perform manual tasks. The following study investigates the available technologies for hazardous confined space work activities, e.g., cleaning, inspecting, and maintenance tasks. The aim is to provide a systematic review of the automated solutions for high-risk activities in confined spaces, considering the non-man entry as the most effective confined space safety strategy. Second, this survey aims to provide suggestions for future research addressing the design of new technologies. The survey consists of about 60 papers concerning innovative technologies for confined space work activities. The document review shows that several solutions have been developed and automation can replace the workers for a limited number of hazardous tasks. Several activities still require the manual intervention due to the complex characteristics of confined spaces, e.g., to remove the remains of the automatic cleaning process from the bottom of a tank. The results show that available technologies require more flexibility to adapt to such occupational environments and further research is needed.

  12. Entry Facilitation by Environmental Groups

    NARCIS (Netherlands)

    van der Made, Allard; Schoonbeek, Lambert

    We consider a model of vertical product differentiation where consumers care about the environmental damage their consumption causes. An environmental group is capable of increasing consumers' environmental concern via a costly campaign. We show that the prospect of such a campaign can induce entry

  13. Ebola virus host cell entry.

    Science.gov (United States)

    Sakurai, Yasuteru

    2015-01-01

    Ebola virus is an enveloped virus with filamentous structure and causes a severe hemorrhagic fever in human and nonhuman primates. Host cell entry is the first essential step in the viral life cycle, which has been extensively studied as one of the therapeutic targets. A virus factor of cell entry is a surface glycoprotein (GP), which is an only essential viral protein in the step, as well as the unique particle structure. The virus also interacts with a lot of host factors to successfully enter host cells. Ebola virus at first binds to cell surface proteins and internalizes into cells, followed by trafficking through endosomal vesicles to intracellular acidic compartments. There, host proteases process GPs, which can interact with an intracellular receptor. Then, under an appropriate circumstance, viral and endosomal membranes are fused, which is enhanced by major structural changes of GPs, to complete host cell entry. Recently the basic research of Ebola virus infection mechanism has markedly progressed, largely contributed by identification of host factors and detailed structural analyses of GPs. This article highlights the mechanism of Ebola virus host cell entry, including recent findings.

  14. Entry and exit of bacterial outer membrane proteins.

    Science.gov (United States)

    Misra, Rajeev

    2015-08-01

    The sites of new outer membrane protein (OMP) deposition and the fate of pre-existing OMPs are still enigmatic despite numerous concerted efforts. Rassam et al. identified mid-cell regions as the primary entry points for new OMP insertion in clusters, driving the pre-existing OMP clusters towards cell poles for long-term storage. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Numerical Development

    Science.gov (United States)

    Siegler, Robert S.; Braithwaite, David W.

    2016-01-01

    In this review, we attempt to integrate two crucial aspects of numerical development: learning the magnitudes of individual numbers and learning arithmetic. Numerical magnitude development involves gaining increasingly precise knowledge of increasing ranges and types of numbers: from non-symbolic to small symbolic numbers, from smaller to larger…

  16. Hindi Numerals.

    Science.gov (United States)

    Bright, William

    In most languages encountered by linguists, the numerals, considered as a paradigmatic set, constitute a morpho-syntactic problem of only moderate complexity. The Indo-Aryan language family of North India, however, presents a curious contrast. The relatively regular numeral system of Sanskrit, as it has developed historically into the modern…

  17. Chemotherapy Order Entry by a Clinical Support Pharmacy Technician in an Outpatient Medical Day Unit.

    Science.gov (United States)

    Neville, Heather; Broadfield, Larry; Harding, Claudia; Heukshorst, Shelley; Sweetapple, Jennifer; Rolle, Megan

    2016-01-01

    Pharmacy technicians are expanding their scope of practice, often in partnership with pharmacists. In oncology, such a shift in responsibilities may lead to workflow efficiencies, but may also cause concerns about patient risk and medication errors. The primary objective was to compare the time spent on order entry and order-entry checking before and after training of a clinical support pharmacy technician (CSPT) to perform chemotherapy order entry. The secondary objectives were to document workflow interruptions and to assess medication errors. This before-and-after observational study investigated chemotherapy order entry for ambulatory oncology patients. Order entry was performed by pharmacists before the process change (phase 1) and by 1 CSPT after the change (phase 2); order-entry checking was performed by a pharmacist during both phases. The tasks were timed by an independent observer using a personal digital assistant. A convenience sample of 125 orders was targeted for each phase. Data were exported to Microsoft Excel software, and timing differences for each task were tested with an unpaired t test. Totals of 143 and 128 individual orders were timed for order entry during phase 1 (pharmacist) and phase 2 (CSPT), respectively. The mean total time to perform order entry was greater during phase 1 (1:37 min versus 1:20 min; p = 0.044). Totals of 144 and 122 individual orders were timed for order-entry checking (by a pharmacist) in phases 1 and 2, respectively, and there was no difference in mean total time for order-entry checking (1:21 min versus 1:20 min; p = 0.69). There were 33 interruptions not related to order entry (totalling 39:38 min) during phase 1 and 25 interruptions (totalling 30:08 min) during phase 2. Three errors were observed during order entry in phase 1 and one error during order-entry checking in phase 2; the errors were rated as having no effect on patient care. Chemotherapy order entry by a trained CSPT appeared to be just as safe and

  18. Numerical analysis

    CERN Document Server

    Rao, G Shanker

    2006-01-01

    About the Book: This book provides an introduction to Numerical Analysis for the students of Mathematics and Engineering. The book is designed in accordance with the common core syllabus of Numerical Analysis of Universities of Andhra Pradesh and also the syllabus prescribed in most of the Indian Universities. Salient features: Approximate and Numerical Solutions of Algebraic and Transcendental Equation Interpolation of Functions Numerical Differentiation and Integration and Numerical Solution of Ordinary Differential Equations The last three chapters deal with Curve Fitting, Eigen Values and Eigen Vectors of a Matrix and Regression Analysis. Each chapter is supplemented with a number of worked-out examples as well as number of problems to be solved by the students. This would help in the better understanding of the subject. Contents: Errors Solution of Algebraic and Transcendental Equations Finite Differences Interpolation with Equal Intervals Interpolation with Unequal Int...

  19. Flavivirus Entry Receptors: An Update

    Directory of Open Access Journals (Sweden)

    Manuel Perera-Lecoin

    2013-12-01

    Full Text Available Flaviviruses enter host cells by endocytosis initiated when the virus particles interact with cell surface receptors. The current model suggests that flaviviruses use at least two different sets of molecules for infectious entry: attachment factors that concentrate and/or recruit viruses on the cell surface and primary receptor(s that bind to virions and direct them to the endocytic pathway. Here, we present the currently available knowledge regarding the flavivirus receptors described so far with specific attention to C-type lectin receptors and the phosphatidylserine receptors, T-cell immunoglobulin and mucin domain (TIM and TYRO3, AXL and MER (TAM. Their role in flavivirus attachment and entry as well as their implication in the virus biology will be discussed in depth.

  20. Numerical analysis

    CERN Document Server

    Scott, L Ridgway

    2011-01-01

    Computational science is fundamentally changing how technological questions are addressed. The design of aircraft, automobiles, and even racing sailboats is now done by computational simulation. The mathematical foundation of this new approach is numerical analysis, which studies algorithms for computing expressions defined with real numbers. Emphasizing the theory behind the computation, this book provides a rigorous and self-contained introduction to numerical analysis and presents the advanced mathematics that underpin industrial software, including complete details that are missing from most textbooks. Using an inquiry-based learning approach, Numerical Analysis is written in a narrative style, provides historical background, and includes many of the proofs and technical details in exercises. Students will be able to go beyond an elementary understanding of numerical simulation and develop deep insights into the foundations of the subject. They will no longer have to accept the mathematical gaps that ex...

  1. Fundamental study on the size and inter-key spacing of numeric keys for touch screen.

    Science.gov (United States)

    Harada, H; Katsuura, T; Kikuchi, Y

    1996-12-01

    The purpose of this study was to reveal the optimum size and inter-key spacing of numeric square keys for touch screens. Six male students (22-25 years old) and three female students (21-24 years old) volunteered as subjects for this experiment. Each subject took part in data entry tasks using numeric square keys of touch devices. The sizes of keys were 6, 12, 21, 30 and 39 mm and each the inter-key spacing was 0, 3, 6, 12 and 21 mm. Response times with key sizes of 6 and 12 mm were significantly slower than with key sizes of 21 and 30 mm (p touch screens should be more than 21 mm and optimum inter-key spacing should be from 3 to 6 mm. Optimum key size, however, must be selected with regard to the limitation of screen size.

  2. Predicting the Diversity of Foreign Entry Modes

    DEFF Research Database (Denmark)

    Hashai, Niron; Geisler Asmussen, Christian; Benito, Gabriel

    2007-01-01

    diversity across value chain activities and host markets. Analyzing a sample of Israeli based firms we show that larger firms exhibit a higher degree of entry mode diversity both across value chain activities and across host markets. Higher levels of knowledge intensity are also associated with more......This paper expands entry mode literature by referring to multiple modes exerted in different value chain activities within and across host markets, rather than to a single entry mode at the host market level. Scale of operations and knowledge intensity are argued to affect firms' entry mode...... diversity in firms' entry modes across both dimensions....

  3. Entry decisions in the generic pharmaceutical industry.

    Science.gov (United States)

    Morton, F M

    1999-01-01

    Data on all generic drug entries in the period 1984-1994 are used to estimate which markets heterogeneous potential entrants will decide to enter. I find that organizational experience predicts entry. Firms tend to enter markets with supply and demand characteristics similar to the firm's existing drugs. Larger revenue markets, markets with more hospital sales, and products that treat chronic conditions attract more entry. The simultaneous nature of entry leads to an additional interpretation: specialization is profitable because of the severe risk to profits when a market is "overentered." However, I am unable to make any conclusions about the efficiency of entry decisions.

  4. COMPARATIVE CHARACTERISTICS OF STRATEGIES ON ENTRY TO FOREIGN MARKET

    Directory of Open Access Journals (Sweden)

    A. S. Morozova

    2009-01-01

    Full Text Available A company must have distinctly described alternatives for taking strategically correct decisions. For this reason the purpose of the paper is to provide comparative characteristics and systematize strategies on entry to foreign market. It is necessary to select the required criteria and carry out multi-criterion analysis in order to arrange systematization and comparative characteristics of  numerous institutional forms being established within the framework of export, cooperation or integration, main strategies on entry to foreign market. The paper contains an analysis and systematization prepared in accordance with the following criteria: strategic purpose of entry to foreign market, time factor in respect of entry to foreign market, distribution of  company’s business-cycle stages among countries, level of investments, form of investments, distribution of investment and management level among countries, risk level, market involvement, legal grounds for foreign activity, status of a subject entering foreign market. The paper makes it possible to give comparative characteristics of the analyzed strategies.

  5. Atmospheric Entry Experiments at IRS

    Science.gov (United States)

    Auweter-Kurtz, M.; Endlich, P.; Herdrich, G.; Kurtz, H.; Laux, T.; Löhle, S.; Nazina, N.; Pidan, S.

    2002-01-01

    Entering the atmosphere of celestial bodies, spacecrafts encounter gases at velocities of several km/s, thereby being subjected to great heat loads. The thermal protection systems and the environment (plasma) have to be investigated by means of computational and ground facility based simulations. For more than a decade, plasma wind tunnels at IRS have been used for the investigation of TPS materials. Nevertheless, ground tests and computer simulations cannot re- place space flights completely. Particularly, entry mission phases encounter challenging problems, such as hypersonic aerothermodynamics. Concerning the TPS, radiation-cooled materials used for reuseable spacecrafts and ablator tech- nologies are of importance. Besides the mentioned technologies, there is the goal to manage guidance navigation, con- trol, landing technology and inflatable technologies such as ballutes that aim to keep vehicles in the atmosphere without landing. The requirement to save mass and energy for planned interplanetary missions such as Mars Society Balloon Mission, Mars Sample Return Mission, Mars Express or Venus Sample Return mission led to the need for manoeuvres like aerocapture, aero-breaking and hyperbolic entries. All three are characterized by very high kinetic vehicle energies to be dissipated by the manoeuvre. In this field flight data are rare. The importance of these manoeuvres and the need to increase the knowledge of required TPS designs and behavior during such mission phases point out the need of flight experiments. As result of the experience within the plasma diagnostic tool development and the plasma wind tunnel data base, flight experiments like the PYrometric RE-entry EXperiment PYREX were developed, fully qualified and successfully flown. Flight experiments such as the entry spectrometer RESPECT and PYREX on HOPE-X are in the conceptual phase. To increase knowledge in the scope of atmospheric manoeuvres and entries, data bases have to be created combining both

  6. Numerical analysis

    CERN Document Server

    Brezinski, C

    2012-01-01

    Numerical analysis has witnessed many significant developments in the 20th century. This book brings together 16 papers dealing with historical developments, survey papers and papers on recent trends in selected areas of numerical analysis, such as: approximation and interpolation, solution of linear systems and eigenvalue problems, iterative methods, quadrature rules, solution of ordinary-, partial- and integral equations. The papers are reprinted from the 7-volume project of the Journal of Computational and Applied Mathematics on '/homepage/sac/cam/na2000/index.html<

  7. Planetary entry, descent, and landing technologies

    Science.gov (United States)

    Pichkhadze, K.; Vorontsov, V.; Polyakov, A.; Ivankov, A.; Taalas, P.; Pellinen, R.; Harri, A.-M.; Linkin, V.

    2003-04-01

    Martian meteorological lander (MML) is intended for landing on the Martian surface in order to monitor the atmosphere at landing point for one Martian year. MMLs shall become the basic elements of a global network of meteorological mini-landers, observing the dynamics of changes of the atmospheric parameters on the Red Planet. The MML main scientific tasks are as follows: (1) Study of vertical structure of the Martian atmosphere throughout the MML descent; (2) On-surface meteorological observations for one Martian year. One of the essential factors influencing the lander's design is its entry, descent, and landing (EDL) sequence. During Phase A of the MML development, five different options for the lander's design were carefully analyzed. All of these options ensure the accomplishment of the above-mentioned scientific tasks with high effectiveness. CONCEPT A (conventional approach): Two lander options (with a parachute system + airbag and an inflatable airbrake + airbag) were analyzed. They are similar in terms of fulfilling braking phases and completely analogous in landing by means of airbags. CONCEPT B (innovative approach): Three lander options were analyzed. The distinguishing feature is the presence of inflatable braking units (IBU) in their configurations. SELECTED OPTION (innovative approach): Incorporating a unique design approach and modern technologies, the selected option of the lander represents a combination of the options analyzed in the framework of Concept B study. Currently, the selected lander option undergoes systems testing (Phase D1). Several MMLs can be delivered to Mars in frameworks of various missions as primary or piggybacking payload: (1) USA-led "Mars Scout" (2007); (2) France-led "NetLander" (2007/2009); (3) Russia-led "Mars-Deimos-Phobos sample return" (2007); (4) Independent mission (currently under preliminary study); etc.

  8. Numerical Relativity

    Science.gov (United States)

    Baker, John G.

    2009-01-01

    Recent advances in numerical relativity have fueled an explosion of progress in understanding the predictions of Einstein's theory of gravity, General Relativity, for the strong field dynamics, the gravitational radiation wave forms, and consequently the state of the remnant produced from the merger of compact binary objects. I will review recent results from the field, focusing on mergers of two black holes.

  9. Numerical Optimization.

    Science.gov (United States)

    1988-01-01

    TASK AREA & WORK UNIT NUMBERS Dipartimento di Matematica -G.--iattelnuoz .’ Universita di Roma "La Sapienze" rlnlRr% Pnmaq (Tt-al’g) I$. CONTROLLING...guaranteed. 3. Adminisrtrative actions The following investigators are working on the contract: (i) Francesco Zirilli Dipartimento di Matematica "G...Castelnuovo" Universiti di Roma "La Sapienza" 00185 Romna (Italy) (ii) Filippo Aluffi-Pentini Dipartimento di Matematica Universiti di Barn 80125 Bari (Italy

  10. Automated entry control system for nuclear facilities

    International Nuclear Information System (INIS)

    Ream, W.K.; Espinoza, J.

    1985-01-01

    An entry control system to automatically control access to nuclear facilities is described. The design uses a centrally located console, integrated into the regular security system, to monitor the computer-controlled passage into and out of sensitive areas. Four types of entry control points are used: an unmanned enclosed portal with metal and SNM detectors for contraband detection with positive personnel identification, a bypass portal for contraband search after a contraband alarm in a regular portal also with positive personnel identification, a single door entry point with positive personnel identification, and a single door entry point with only a magnetic card-type identification. Security force action is required only as a response to an alarm. The integration of the entry control function into the security system computer is also described. The interface between the entry control system and the monitoring security personnel utilizing a color graphics display with touch screen input is emphasized. 2 refs., 7 figs

  11. Numerical relativity

    CERN Document Server

    Nakamura, T

    1993-01-01

    In GR13 we heard many reports on recent. progress as well as future plans of detection of gravitational waves. According to these reports (see the report of the workshop on the detection of gravitational waves by Paik in this volume), it is highly probable that the sensitivity of detectors such as laser interferometers and ultra low temperature resonant bars will reach the level of h ~ 10—21 by 1998. in this level we may expect the detection of the gravitational waves from astrophysical sources such as coalescing binary neutron stars once a year or so. Therefore the progress in numerical relativity is urgently required to predict the wave pattern and amplitude of the gravitational waves from realistic astrophysical sources. The time left for numerical relativists is only six years or so although there are so many difficulties in principle as well as in practice.

  12. Entry Mode Choice in Emerging Markets

    OpenAIRE

    Gundersen, Anne Kathrine Navestad

    2012-01-01

    As the mature markets of developed economies have become increasingly saturated, firms are turning their attention towards emerging markets for further enterprise growth. However, these countries often present significant challenges for foreign entrants, forcing firms to adapt their strategies to the new context. While MNEs? entry mode choice is an extensively studied field, there is a deficit in the entry mode research on SMEs, and even more so when it comes to entry into emerging markets in...

  13. Optimal firm growth under the threat of entry

    Science.gov (United States)

    Kort, Peter M.; Wrzaczek, Stefan

    2015-01-01

    The paper studies the incumbent-entrant problem in a fully dynamic setting. We find that under an open-loop information structure the incumbent anticipates entry by overinvesting, whereas in the Markov perfect equilibrium the incumbent slightly underinvests in the period before the entry. The entry cost level where entry accommodation passes into entry deterrence is lower in the Markov perfect equilibrium. Further we find that the incumbent’s capital stock level needed to deter entry is hump shaped as a function of the entry time, whereas the corresponding entry cost, where the entrant is indifferent between entry and non-entry, is U-shaped. PMID:26435573

  14. An Innovative Approach for Gob-Side Entry Retaining in Thick Coal Seam Longwall Mining

    Directory of Open Access Journals (Sweden)

    Manchao He

    2017-11-01

    Full Text Available Gob-side entry retaining (GER is a popular non-pillar mining technique regarding how to reserve a gateroad for the use of next panel mining. When used in thick coal seams, the conventional entry retaining method requires a huge amount of filling materials and may cause entry (gateroad accidents. Thus, an innovative non-pillar longwall mining approach is introduced. First, structural and mechanical models were built to explore the mechanism of the new approach. The modeling results indicate that effective bulking of the gob roof and reasonable support of the entry roof were key governing factors in improving entry stabilities and reducing roof deformations. Accordingly, a directional roof fracturing technique was proposed to contribute to gob roof caving, and a constant resistance and large deformation anchor (CRLDA cable was used to stabilize the entry roof. Subsequently, the evolutionary laws of the roof structure and stresses were explored using numerical simulation. It was found that the structure of the surrounding rocks around the retained entry changed significantly after roof fracturing. The stress-bearing center was transferred to the gob area, and the entry roof was in a low stress environment after adopting the approach. Finally, the approach was tested on a thick coal seam longwall mining panel. Field monitoring indicates that the retained entry was in a stable state and the index of the retained entry met the requirement of the next mining panel. This work provides an effective and economical approach to non-pillar longwall mining in thick coal seams.

  15. Strategic Entry Deterrence Modeling: Literature Review

    OpenAIRE

    D. A. Seliverstov

    2017-01-01

    The prime focus in this article is on key findings concerning theoretical aspects of strategic behavior by incumbents to deter market entry of new firms. The author summarizes main lines of scientific research in the topic which give an insight into the patterns of the incumbent’s impact on the behavior of the entrants, the entry deterrence instruments and the consequences of these actions. Today the free entry markets are considered to be a rare phenomenon. The market entry of new firms is a...

  16. Energy Information Data Base: corporate author entries

    International Nuclear Information System (INIS)

    1980-06-01

    One of the controls for information entered into the data bases created and maintained by the DOE Technical Information Center is the standardized name for the corporate entity or the corporate author. The purpose of Energy Information Data Base: Corporate Author Entries is to provide a means for the consistent citing of the names of organizations in bibliographic records. These entries serve as guides for users of the DOE/RECON computerized data bases who want to locate information originating in particular organizations. The entries in this revision include the corporate entries used in report bibliographic citations since 1973 and list approximately 28,000 corporate sources

  17. Cutting through - open entries require proper support

    Energy Technology Data Exchange (ETDEWEB)

    Peng, S.S. [West Virginia University, Morgantown, WV (USA). Mining Engineering Dept.

    2000-06-01

    The paper explains the applications of open entries in mining and different roof techniques to relieve longwall abutment pressures. The primary support for the open (or cut-through) entries and recovery rooms are normally similar to other development entries in the same mines. The supplementary supports installed can be divided into the following three types: complete backfill of open entries, supplemental roof and/or rib-bolt reinforcement only - no standing support and rows of standing support with or without supplemental roof and/or rib-bolt reinforcement. 3 figs.

  18. Gene Therapy Targeting HIV Entry

    Directory of Open Access Journals (Sweden)

    Chuka Didigu

    2014-03-01

    Full Text Available Despite the unquestionable success of antiretroviral therapy (ART in the treatment of HIV infection, the cost, need for daily adherence, and HIV-associated morbidities that persist despite ART all underscore the need to develop a cure for HIV. The cure achieved following an allogeneic hematopoietic stem cell transplant (HSCT using HIV-resistant cells, and more recently, the report of short-term but sustained, ART-free control of HIV replication following allogeneic HSCT, using HIV susceptible cells, have served to both reignite interest in HIV cure research, and suggest potential mechanisms for a cure. In this review, we highlight some of the obstacles facing HIV cure research today, and explore the roles of gene therapy targeting HIV entry, and allogeneic stem cell transplantation in the development of strategies to cure HIV infection.

  19. Border Crossing/Entry Data - Border Crossing/Entry Data Time Series tool

    Data.gov (United States)

    Department of Transportation — The dataset is known as “Border Crossing/Entry Data.” The Bureau of Transportation Statistics (BTS) Border Crossing/Entry Data provides summary statistics to the...

  20. An Application of Fuzzy Theory to Technical Competency Analysis for the Entry-Level Electronic Technician.

    Science.gov (United States)

    Chang, Liang-Te; And Others

    A study was conducted to develop the electronic technical competencies of duty and task analysis by using a revised DACUM (Developing a Curriculum) method, a questionnaire survey, and a fuzzy synthesis operation. The revised DACUM process relied on inviting electronics trade professionals to analyze electronic technology for entry-level…

  1. Exploring Self-Efficacy among Entry-Level and Advanced BSW Students

    Science.gov (United States)

    Simmons, Christopher; Fisher, Amy Killen; Barnard, Marie; Allen, Susan C.

    2017-01-01

    This study compared a sample of entry-level and advanced BSW students, who completed pretest and posttest self-efficacy measures, to assess their level of confidence in performing social work tasks after 15 weeks of instruction. By the end of the semester, only advanced students made significant gains in self-efficacy beliefs, and they showed a…

  2. Aerothermodynamics of Blunt Body Entry Vehicles. Chapter 3

    Science.gov (United States)

    Hollis, Brian R.; Borrelli, Salvatore

    2011-01-01

    In this chapter, the aerothermodynamic phenomena of blunt body entry vehicles are discussed. Four topics will be considered that present challenges to current computational modeling techniques for blunt body environments: turbulent flow, non-equilibrium flow, rarefied flow, and radiation transport. Examples of comparisons between computational tools to ground and flight-test data will be presented in order to illustrate the challenges existing in the numerical modeling of each of these phenomena and to provide test cases for evaluation of Computational Fluid Dynamics (CFD) code predictions.

  3. Energy Data Base: corporate author entries

    International Nuclear Information System (INIS)

    Hendricks, P.L.

    1982-08-01

    Corporate author entries provide a means for consistent citing of the names of organizations in bibliographic records in the data bases of the DOE Technical Information Center. These entries serve as guides for users of the DOE/RECON computerized data bases who want to locate information originating in particular organizations

  4. Strategic Entry Deterrence Modeling: Literature Review

    Directory of Open Access Journals (Sweden)

    D. A. Seliverstov

    2017-01-01

    Full Text Available The prime focus in this article is on key findings concerning theoretical aspects of strategic behavior by incumbents to deter market entry of new firms. The author summarizes main lines of scientific research in the topic which give an insight into the patterns of the incumbent’s impact on the behavior of the entrants, the entry deterrence instruments and the consequences of these actions. Today the free entry markets are considered to be a rare phenomenon. The market entry of new firms is associated with significant entry costs, which allow the incumbents to take advantage of their dominant position and derive positive economic profits. In case of entry threat by potential competitors the incumbents take strategic actions aimed at deterring entry and preserving their dominant position. Among the most efficient strategic actions one can emphasize the erection of additional barriers to entry for the newcomers through producing the limit output and price, investments in sunk assets, capacity expansion and product differentiation. Meanwhile by taking strategic actions the incumbents are not always trying to affect the entrant’s costs and profit directly, they often aim at changing the entrant’s expectations regarding future intentions of the incumbents to preserve dominant position.

  5. 40 CFR 170.112 - Entry restrictions.

    Science.gov (United States)

    2010-07-01

    ...-entry interval applies, including, but not limited to, soil, water, air, or surfaces of plants; and (2...-entry activity, the agricultural employer shall provide a decontamination site in accordance with § 170... running water for routine and emergency decontamination and mechanical devices that would reduce the...

  6. Entry and Competition in Differentiated Products Markets

    NARCIS (Netherlands)

    Schaumans, C.B.C.; Verboven, F.L.

    2011-01-01

    We propose a methodology for estimating the competition effects from entry when firms sell differentiated products. We first derive precise conditions under which Bres- nahan and Reiss'entry threshold ratios (ETRs) can be used to test for the presence and to measure the magnitude of competition

  7. On Entry Deterrence and Imperfectly Observable Commitment

    DEFF Research Database (Denmark)

    Poulsen, Anders

    2001-01-01

    We analyse a simple entry-deterrence game, where a `Potential Intruder' only imperfectly observes the decision of an `Incumbent' to commit or to not commit to fight any entry by the Potential Intruder. Our game generalises the one studied in Bonanno (1992) by allowing for a richer information tec...

  8. Foreign Entry and Heterogeneous Growth of Firms

    DEFF Research Database (Denmark)

    Deng, Paul Duo; Jefferson, Gary H.

    We adopt the framework of Schumpeterian creative destruction formalized by Aghion et al. (2009) to analyze the impact of foreign entry on the productivity growth of domestic firms. In the face of foreign entry, domestic firms exhibit heterogeneous patterns of growth depending on their technologic...... manufacturing. Our empirical results confirm that foreign entry indeed generates strong heterogeneous growth patterns among domestic firms.......We adopt the framework of Schumpeterian creative destruction formalized by Aghion et al. (2009) to analyze the impact of foreign entry on the productivity growth of domestic firms. In the face of foreign entry, domestic firms exhibit heterogeneous patterns of growth depending on their technological...... distance from foreign firms. Domestic firms with smaller technological distance from their foreign counterparts tend to experience faster productivity growth, while firms with larger technological distance tend to lag further behind. We test this hypothesis using a unique firm-level data of Chinese...

  9. Decision paths in complex tasks

    Science.gov (United States)

    Galanter, Eugene

    1991-01-01

    Complex real world action and its prediction and control has escaped analysis by the classical methods of psychological research. The reason is that psychologists have no procedures to parse complex tasks into their constituents. Where such a division can be made, based say on expert judgment, there is no natural scale to measure the positive or negative values of the components. Even if we could assign numbers to task parts, we lack rules i.e., a theory, to combine them into a total task representation. We compare here two plausible theories for the amalgamation of the value of task components. Both of these theories require a numerical representation of motivation, for motivation is the primary variable that guides choice and action in well-learned tasks. We address this problem of motivational quantification and performance prediction by developing psychophysical scales of the desireability or aversiveness of task components based on utility scaling methods (Galanter 1990). We modify methods used originally to scale sensory magnitudes (Stevens and Galanter 1957), and that have been applied recently to the measure of task 'workload' by Gopher and Braune (1984). Our modification uses utility comparison scaling techniques which avoid the unnecessary assumptions made by Gopher and Braune. Formula for the utility of complex tasks based on the theoretical models are used to predict decision and choice of alternate paths to the same goal.

  10. Numerical analysis

    CERN Document Server

    Jacques, Ian

    1987-01-01

    This book is primarily intended for undergraduates in mathematics, the physical sciences and engineering. It introduces students to most of the techniques forming the core component of courses in numerical analysis. The text is divided into eight chapters which are largely self-contained. However, with a subject as intricately woven as mathematics, there is inevitably some interdependence between them. The level of difficulty varies and, although emphasis is firmly placed on the methods themselves rather than their analysis, we have not hesitated to include theoretical material when we consider it to be sufficiently interesting. However, it should be possible to omit those parts that do seem daunting while still being able to follow the worked examples and to tackle the exercises accompanying each section. Familiarity with the basic results of analysis and linear algebra is assumed since these are normally taught in first courses on mathematical methods. For reference purposes a list of theorems used in the t...

  11. Computerized provider order entry systems.

    Science.gov (United States)

    2001-01-01

    Computerized provider order entry (CPOE) systems are designed to replace a hospital's paper-based ordering system. They allow users to electronically write the full range of orders, maintain an online medication administration record, and review changes made to an order by successive personnel. They also offer safety alerts that are triggered when an unsafe order (such as for a duplicate drug therapy) is entered, as well as clinical decision support to guide caregivers to less expensive alternatives or to choices that better fit established hospital protocols. CPOE systems can, when correctly configured, markedly increase efficiency and improve patient safety and patient care. However, facilities need to recognize that currently available CPOE systems require a tremendous amount of time and effort to be spent in customization before their safety and clinical support features can be effectively implemented. What's more, even after they've been customized, the systems may still allow certain unsafe orders to be entered. Thus, CPOE systems are not currently a quick or easy remedy for medical errors. ECRI's Evaluation of CPOE systems--conducted in collaboration with the Institute for Safe Medication Practices (ISMP)--discusses these and other related issues. It also examines and compares CPOE systems from three suppliers: Eclipsys Corp., IDX Systems Corp., and Siemens Medical Solutions Health Services Corp. Our testing focuses primarily on the systems' interfacing capabilities, patient safeguards, and ease of use.

  12. Three-Dimensional Flow Behavior Inside the Submerged Entry Nozzle

    Science.gov (United States)

    Real-Ramirez, Cesar Augusto; Carvajal-Mariscal, Ignacio; Sanchez-Silva, Florencio; Cervantes-de-la-Torre, Francisco; Diaz-Montes, Jesus; Gonzalez-Trejo, Jesus

    2018-05-01

    According to various authors, the surface quality of steel depends on the dynamic conditions that occur within the continuous casting mold's upper region. The meniscus, found in that upper region, is where the solidification process begins. The liquid steel is distributed into the mold through a submerged entry nozzle (SEN). In this paper, the dynamic behavior inside the SEN is analyzed by means of physical experiments and numerical simulations. The particle imaging velocimetry technique was used to obtain the vector field in different planes and three-dimensional flow patterns inside the SEN volume. Moreover, large eddy simulation was performed, and the turbulence model results were used to understand the nonlinear flow pattern inside the SEN. Using scaled physical and numerical models, quasi-periodic behavior was observed due to the interaction of two three-dimensional vortices that move inside the SEN lower region located between the exit ports of the nozzle.

  13. Entry, Descent, and Landing With Propulsive Deceleration

    Science.gov (United States)

    Palaszewski, Bryan

    2012-01-01

    The future exploration of the Solar System will require innovations in transportation and the use of entry, descent, and landing (EDL) systems at many planetary landing sites. The cost of space missions has always been prohibitive, and using the natural planetary and planet s moons atmospheres for entry, descent, and landing can reduce the cost, mass, and complexity of these missions. This paper will describe some of the EDL ideas for planetary entry and survey the overall technologies for EDL that may be attractive for future Solar System missions.

  14. Technical Area 55 Entry Control System (ECS)

    International Nuclear Information System (INIS)

    Beaumont, A.; Brundige, E.; DesJardin, R.; Rivera, R.

    1984-01-01

    The exchange badge system which was used at the Plutonium Facility located in Technical Area 55 was replaced on a trial basis with an automated Entry Control System. As a result of the success of the trial system, a new system incorporating expanded features and increased reliability is being implemented. The new Entry Control System incorporates several features not previously available in relatively inexpensive entry systems. The reliability of the system is enhanced by redundant microprocessors incorporating bubble memory for nonvolatile storage of the system data base. The badge readers incorporate dual communication lines to two different controllers to further increase the total system reliability

  15. Physical security workshop summary: entry control

    International Nuclear Information System (INIS)

    Eaton, M.J.

    1982-01-01

    Entry control hardware has been used extensively in the past to assist security forces in separating the authorized from the unauthorized at the plant perimeter. As more attention is being focused on the insider threat, these entry control elements are being used to extend the security inspectors' presence into the plant by compartmentalizing access and monitoring vital components. This paper summarizes the experiences expressed by the participants at the March 16 to 19, 1982 INMM Physical Protection Workshop in utilizing access control and contraband detection hardware for plant wide entry control applications

  16. Automation of Command and Data Entry in a Glovebox Work Volume: An Evaluation of Data Entry Devices

    Science.gov (United States)

    Steele, Marianne K.; Nakamura, Gail; Havens, Cindy; LeMay, Moira

    1996-01-01

    The present study was designed to examine the human-computer interface for data entry while performing experimental procedures within a glovebox work volume in order to make a recommendation to the Space Station Biological Research Project for a data entry system to be used within the Life Sciences Glovebox. Test subjects entered data using either a manual keypad, similar to a standard computer numerical keypad located within the glovebox work volume, or a voice input system using a speech recognition program with a microphone headset. Numerical input and commands were programmed in an identical manner between the two systems. With both electronic systems, a small trackball was available within the work volume for cursor control. Data, such as sample vial identification numbers, sample tissue weights, and health check parameters of the specimen, were entered directly into procedures that were electronically displayed on a video monitor within the glovebox. A pen and paper system with a 'flip-chart' format for procedure display, similar to that currently in use on the Space Shuttle, was used as a baseline data entry condition. Procedures were performed by a single operator; eight test subjects were used in the study. The electronic systems were tested under both a 'nominal' or 'anomalous' condition. The anomalous condition was introduced into the experimental procedure to increase the probability of finding limitations or problems with human interactions with the electronic systems. Each subject performed five test runs during a test day: two procedures each with voice and keypad, one with and one without anomalies, and one pen and paper procedure. The data collected were both quantitative (times, errors) and qualitative (subjective ratings of the subjects).

  17. A case study of multi-seam coal mine entry stability analysis with strength reduction method.

    Science.gov (United States)

    Tulu, Ihsan Berk; Esterhuizen, Gabriel S; Klemetti, Ted; Murphy, Michael M; Sumner, James; Sloan, Michael

    2016-03-01

    In this paper, the advantage of using numerical models with the strength reduction method (SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated. A coal mine under variable topography from the Central Appalachian region is used as a case study. At this mine, unexpected roof conditions were encountered during development below previously mined panels. Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels. Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries. The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations. The SRM-calculated stability factors were compared with observations made during the site visits, and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case. It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.

  18. Entry Mode and Performance of Nordic Firms

    DEFF Research Database (Denmark)

    Wulff, Jesper

    2015-01-01

    including the proposed moderating effect, on average, yield higher post-entry performance. This study sheds light on inconsistent results found in previous research investigating the impact of international experience and has practical implications for managerial decision-making.......This study investigates whether the relationship between mode of international market entry and non-location bound international experience is weaker for firms that are large or have a high foreign to total sales ratio, labeled multinational experience. Empirical evidence based on 250 foreign...... market entries made by Norwegian, Danish and Swedish firms suggests that the association between equity mode choice and non-location bound international experience diminishes in the presence of higher levels of multinational experience. Furthermore, firms whose entry mode choice is predicted by the model...

  19. Border Crossing/Entry Data - Boarder Crossing

    Data.gov (United States)

    Department of Transportation — Border Crossing/Entry Data provides summary statistics for incoming crossings at the U.S.-Canadian and the U.S.-Mexican border at the port level. Data are available...

  20. Market entry strategies into the BRIC countries

    DEFF Research Database (Denmark)

    Boyd, Britta; Dyhr Ulrich, Anna Marie

    2014-01-01

    Based on a sample of 177 exporting SMEs, this study investigates what market entry strategy is used by Danish family and non-family businesses. From a resource-based view, three critical internal factors (risk, flexibility and control) affecting the entry mode choice into the BRIC markets...... are analysed. The effective management of firms’ resources and capabilities is influenced by the perception of these internal factors when expanding into foreign markets. Our results confirmed that family firms build up longer lasting relationships in the host country by choosing high commitment entry modes...... when entering the BRIC markets. In contrast, family firms choose high commitment entry modes which involve high risk and low flexibility when entering the BRIC markets. Further implications discuss the suitability of export strategies to BRIC markets for managers of Danish family and non-family firms....

  1. Energy Information Data Base: corporate author entries

    International Nuclear Information System (INIS)

    1980-03-01

    One of the controls for information entered into the data bases created and maintained by the DOE Technical Information Center is the standardized name for the corporate entity or the corporate author. The purpose of Energy Information Data Base: Corporate Author Entries (TID-4585-R1) and this supplemental list of authorized or standardized corporate entries is to provide a means for the consistent citing of the names of organizations in bibliographic records. In general, an entry in Corporate Author Entries consists of the seven-digit code number assigned to the particular corporate entity, the two-letter country code, the largest element of the corporate name, the location of the corporate entity, and the smallest element of the corporate name (if provided). This supplement [DOE/TIC-4585-R1(Suppl.5)] contains additions to the base document (TID-4585-R1) and is intended to be used with that publication

  2. Tactile Data Entry System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Building on our successful Phase I Tactile Data Entry program, Barron Associates proposes development of a Glove-Enabled Computer Operations (GECO) system to permit...

  3. Performance of an Orifice Compensated Two-Lobe Hole-Entry Hybrid Journal Bearing

    Directory of Open Access Journals (Sweden)

    J. Sharana Basavaraja

    2008-01-01

    Full Text Available The work presented in this paper aims to study the performance of a two-lobe hole-entry hybrid journal bearing system compensated by orifice restrictors. The Reynolds equation governing the flow of lubricant in the clearance space between the journal and bearing together with the equation of flow through an orifice restrictor has been solved using FEM and Galerkin's method. The bearing performance characteristics results have been simulated for an orifice compensated nonrecessed two-lobe hole-entry hybrid journal bearing symmetric configuration for the various values of offset factor (, restrictor design parameter (2, and the value of external load (0. Further, a comparative study of the performance of a two-lobe hole-entry hybrid journal bearing system with a circular hole-entry symmetric hybrid journal bearing system has also been carried out so that a designer has a better flexibility in choosing a suitable bearing configuration. The simulated numerical results indicate that for the two-lobe symmetric hole-entry hybrid journal bearing system with an offset factor ( greater than one provides 30 to 50 percent larger values of direct stiffness and direct damping coefficients as compared to a circular symmetric hole-entry hybrid journal bearing system.

  4. "Exclusive Dealing Contract and Inefficient Entry Threat"

    OpenAIRE

    Noriyuki Yanagawa; Ryoko Oki

    2008-01-01

    This paper examines the effects of exclusive dealing contracts in a simple model with manufacturers-distributors relations. We consider entrants in both manufacturing and distribution sectors. It is well-known that a potential entry threat is welfare increasing under homogenous price competition, even though the potential entrant is less productive. This paper reexamines this intuition by employing the above model. We show that the entry threat of a less-productive manufacturer is welfare dec...

  5. Nipah virus entry can occur by macropinocytosis

    International Nuclear Information System (INIS)

    Pernet, Olivier; Pohl, Christine; Ainouze, Michelle; Kweder, Hasan; Buckland, Robin

    2009-01-01

    Nipah virus (NiV) is a zoonotic biosafety level 4 paramyxovirus that emerged recently in Asia with high mortality in man. NiV is a member, with Hendra virus (HeV), of the Henipavirus genus in the Paramyxoviridae family. Although NiV entry, like that of other paramyxoviruses, is believed to occur via pH-independent fusion with the host cell's plasma membrane we present evidence that entry can occur by an endocytic pathway. The NiV receptor ephrinB2 has receptor kinase activity and we find that ephrinB2's cytoplasmic domain is required for entry but is dispensable for post-entry viral spread. The mutation of a single tyrosine residue (Y304F) in ephrinB2's cytoplasmic tail abrogates NiV entry. Moreover, our results show that NiV entry is inhibited by constructions and drugs specific for the endocytic pathway of macropinocytosis. Our findings could potentially permit the rapid development of novel low-cost antiviral treatments not only for NiV but also HeV.

  6. Analysis of Mechanical Energy Transport on Free-Falling Wedge during Water-Entry Phase

    Directory of Open Access Journals (Sweden)

    Wen-Hua Wang

    2012-01-01

    Full Text Available For better discussing and understanding the physical phenomena and body-fluid interaction of water-entry problem, here mechanical-energy transport (wedge, fluid, and each other of water-entry model for free falling wedge is studied by numerical method based on free surface capturing method and Cartesian cut cell mesh. In this method, incompressible Euler equations for a variable density fluid are numerically calculated by the finite volume method. Then artificial compressibility method, dual-time stepping technique, and Roe's approximate Riemann solver are applied in the numerical scheme. Furthermore, the projection method of momentum equations and exact Riemann solution are used to calculate the fluid pressure on solid boundary. On this basis, during water-entry phase of the free-falling wedge, macroscopic energy conversion of overall body-fluid system and microscopic energy transformation in fluid field are analyzed and discussed. Finally, based on test cases, many useful conclusions about mechanical energy transport for water entry problem are made and presented.

  7. Water Entry and Exit of Horizontal Cylinder in Free Surface Flow

    International Nuclear Information System (INIS)

    Hafsia, Zouhaier; Maalel, Khlifa; Mnasri, Chokri; Mohamed, Omri

    2009-01-01

    This paper describes two-dimensional numerical simulations of the water entry and exit of horizontal circular cylinder at constant velocity. The deformation of free surface is described by Navier-Stokes (N S) equations of incompressible and viscous fluid with additional transport equation of the volume-of-fluid (VOF). The motion of the cylinder is modeled by the associated momentum source term implemented in the Phoenicis (Parabolic Hyperbolic Or Elliptic Numerical Integration Code Series) code. The domain is discretized by a fixed Cartesian grid using a finite volume method and the cylinder is represented and cut cell method. The simulated results are compared with the numerical results of Lin (2007). This comparison shows good agreement in terms of free surface evolution for water exit and sinking. However, for water entry, the jet flow simulated by Lin is not reproduced. The free surface deformation around the cylinder in downward direction is accurately predicted

  8. Membrane rafts: a potential gateway for bacterial entry into host cells.

    Science.gov (United States)

    Hartlova, Anetta; Cerveny, Lukas; Hubalek, Martin; Krocova, Zuzana; Stulik, Jiri

    2010-04-01

    Pathogenic bacteria have developed various mechanisms to evade host immune defense systems. Invasion of pathogenic bacteria requires interaction of the pathogen with host receptors, followed by activation of signal transduction pathways and rearrangement of the cytoskeleton to facilitate bacterial entry. Numerous bacteria exploit specialized plasma membrane microdomains, commonly called membrane rafts, which are rich in cholesterol, sphingolipids and a special set of signaling molecules which allow entry to host cells and establishment of a protected niche within the host. This review focuses on the current understanding of the raft hypothesis and the means by which pathogenic bacteria subvert membrane microdomains to promote infection.

  9. Order Entry Protocols Are an Amenable Target for Workflow Automation.

    Science.gov (United States)

    Tudor, James; Klochko, Chad; Patel, Milind; Siegal, Daniel

    2018-04-21

    Order entry protocol selection of advanced imaging studies is labor-intensive, can disrupt workflow, and may displace staff from more valuable tasks. The aim of this study was to explore and compare the behaviors of radiologic technologists and radiologists when determining protocol to identify opportunities for workflow automation. A data set of over 273,000 cross-sectional examination orders from four hospitals within our health system was created. From this data set, we isolated the 12 most frequently requested examinations, which represent almost 50% of the entirety of advanced imaging volume. Intergroup comparisons were made between behavior of radiologic technologists and radiologists or residents when determining protocol. Frequencies of changes were calculated. Common parameters of changed examinations were identified. The overall change rate for both radiologists and residents (4%) is very low and comparable to the overall change rate of radiologic technologists (1%). The change rates for the 12 most ordered examinations were calculated and compared individually. Most examinations that underwent change involved a patient with a low estimated glomerular filtration rate, a patient with a contrast allergy, or a provider ordering a general examination but in fact wanting an organ-specific protocol or an angiographic study. Order entry protocol selection of the most frequently ordered advanced imaging examinations was rarely a value-added activity because these examinations are rarely changed. Changes follow predictable patterns that make order entry protocol selection of most radiology orders for advanced imaging amenable to workflow automation. Copyright © 2018 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  10. Medical student satisfaction, coping and burnout in direct-entry versus graduate-entry programmes.

    Science.gov (United States)

    DeWitt, Dawn; Canny, Benedict J; Nitzberg, Michael; Choudri, Jennifer; Porter, Sarah

    2016-06-01

    There is ongoing debate regarding the optimal length of medical training, with concern about the cost of prolonged training. Two simultaneous tracks currently exist in Australia: direct entry from high school and graduate entry for students with a bachelor degree. Medical schools are switching to graduate entry based on maturity, academic preparedness and career-choice surety. We tested the assumption that graduate entry is better by exploring student preferences, coping, burnout, empathy and alcohol use. From a potential pool of 2188 participants, enrolled at five Australian medical schools, a convenience sample of 688 (31%) first and second year students completed a survey in the middle of the academic year. Participants answered questions about demographics, satisfaction and coping and completed three validated instruments. Over 90% of students preferred their own entry-type, though more graduate-entry students were satisfied with their programme (82.4% versus 65.3%, p students in self-reported coping or in the proportion of students meeting criteria for burnout (50.7% versus 51.2%). Direct-entry students rated significantly higher for empathy (concern, p = 0.022; personal distress, p = 0.031). Graduate-entry students reported significantly more alcohol use and hazardous drinking (30.0% versus 22.8%; p = 0.017). Our multi-institution data confirm that students are generally satisfied with their choice of entry pathway and do not confirm significant psychosocial benefits of graduate entry. Overall, our data suggest that direct-entry students cope with the workload and psychosocial challenges of medical school, in the first 2 years, as well as graduate-entry students. Burnout and alcohol use should be addressed in both pathways. Despite studies showing similar academic outcomes, and higher total costs, more programmes in Australia are becoming graduate entry. Further research on non-cognitive issues and outcomes is needed so that universities, government

  11. 19 CFR 151.41 - Information on entry summary.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Information on entry summary. 151.41 Section 151... Products § 151.41 Information on entry summary. On the entry summary for petroleum or petroleum products in.... If the exact volumetric quantity cannot be determined in advance, the entry summary may be made for...

  12. Numerical Analysis Objects

    Science.gov (United States)

    Henderson, Michael

    1997-08-01

    The Numerical Analysis Objects project (NAO) is a project in the Mathematics Department of IBM's TJ Watson Research Center. While there are plenty of numerical tools available today, it is not an easy task to combine them into a custom application. NAO is directed at the dual problems of building applications from a set of tools, and creating those tools. There are several "reuse" projects, which focus on the problems of identifying and cataloging tools. NAO is directed at the specific context of scientific computing. Because the type of tools is restricted, problems such as tools with incompatible data structures for input and output, and dissimilar interfaces to tools which solve similar problems can be addressed. The approach we've taken is to define interfaces to those objects used in numerical analysis, such as geometries, functions and operators, and to start collecting (and building) a set of tools which use these interfaces. We have written a class library (a set of abstract classes and implementations) in C++ which demonstrates the approach. Besides the classes, the class library includes "stub" routines which allow the library to be used from C or Fortran, and an interface to a Visual Programming Language. The library has been used to build a simulator for petroleum reservoirs, using a set of tools for discretizing nonlinear differential equations that we have written, and includes "wrapped" versions of packages from the Netlib repository. Documentation can be found on the Web at "http://www.research.ibm.com/nao". I will describe the objects and their interfaces, and give examples ranging from mesh generation to solving differential equations.

  13. Single Pilot Workload Management During Cruise in Entry Level Jets

    Science.gov (United States)

    Burian, Barbara K.; Pruchnicki, Shawn; Christopher, Bonny; Silverman, Evan; Hackworth, Carla; Rogers, Jason; Williams, Kevin; Drechsler, Gena; Runnels, Barry; Mead, Andy

    2013-01-01

    Advanced technologies and automation are important facilitators of single pilot operations, but they also contribute to the workload management challenges faced by the pilot. We examined task completion, workload management, and automation use in an entry level jet (ELJ) flown by single pilots. Thirteen certificated Cessna Citation Mustang (C510-S) pilots flew an instrument flight rules (IFR) experimental flight in a Cessna Citation Mustang simulator. At one point participants had to descend to meet a crossing restriction prior to a waypoint and prepare for an instrument approach into an un-towered field while facilitating communication from a lost pilot who was flying too low for ATC to hear. Four participants experienced some sort of difficulty with regard to meeting the crossing restriction and almost half (n=6) had problems associated with the instrument approach. Additional errors were also observed including eight participants landing at the airport with an incorrect altimeter setting.

  14. Entry control system for large populations

    International Nuclear Information System (INIS)

    Merillat, P.D.

    1982-01-01

    An Entry Control System has been developed which is appropriate for use at an installation with a large population requiring access over a large area. This is accomplished by centralizing the data base management and enrollment functions and decentralizing the guard-assisted, positive personnel identification and access functions. Current information pertaining to all enrollees is maintained through user-friendly enrollment stations. These stations may be used to enroll individuals, alter their area access authorizations, change expiration dates, and other similar functions. An audit trail of data base alterations is provided to the System Manager. Decentrailized systems exist at each area to which access is controlled. The central system provides these systems with the necessary entry control information to allow them to operate microprocessor-driven entry control devices. The system is comprised of commercially available entry control components and is structured such that it will be able to incorporate improved devices as technology porogresses. Currently, access is granted to individuals who possess a valid credential, have current access authorization, can supply a memorized personal identification number, and whose physical hand dimensions match their profile obtained during enrollment. The entry control devices report misuses as security violations to a Guard Alarm Display and Assessment System

  15. Financial Performance of Entry Mode Decisions

    DEFF Research Database (Denmark)

    Boyd, Britta; Dyhr Ulrich, Anna Marie; Hollensen, Svend

    2012-01-01

    Based on a survey of 170 Danish SMEs the paper examines influences on entry mode choices and the financial outcome of these decisions. The main research objectives are divided into two steps: Step 1: To determine the factors influencing the choice of foreign entry modes by Danish companies. Step ...... and implications are provided for companies willing to invest more into foreign markets in order to achieve a higher degree of control and better financial results.......Based on a survey of 170 Danish SMEs the paper examines influences on entry mode choices and the financial outcome of these decisions. The main research objectives are divided into two steps: Step 1: To determine the factors influencing the choice of foreign entry modes by Danish companies. Step 2......: To determine the relationship between the choice of entry mode and export performance, measured in terms of financial outcome. Drawing from transaction cost theory the authors develop and test a model where different factors affect the level of control chosen by the parent company. This study contributes...

  16. Atmospheric Entry Studies for Venus Missions: 45 Sphere-Cone Rigid Aeroshells and Ballistic Entries

    Science.gov (United States)

    Prabhu, Dinesh K.; Spilker, Thomas R.; Allen, Gary A., Jr.; Hwang, Helen H.; Cappuccio, Gelsomina; Moses, Robert W.

    2013-01-01

    The present study considers direct ballistic entries into the atmosphere of Venus using a 45deg sphere-cone rigid aeroshell, a legacy shape that has been used successfully in the past in the Pioneer Venus Multiprobe Mission. For a number of entry mass and heatshield diameter combinations (i.e., various ballistic coefficients) and entry velocities, the trajectory space in terms of entry flight path angles between skip out and -30deg is explored with a 3DoF trajectory code, TRAJ. From these trajectories, the viable entry flight path angle space is determined through the use of mechanical and thermal performance limits on the thermal protection material and science payload; the thermal protection material of choice is entry-grade carbon phenolic, for which a material thermal response model is available. For mechanical performance, a 200 g limit is placed on the peak deceleration load experienced by the science instruments, and 10 bar is assumed as the pressure limit for entry-grade carbon-phenolic material. For thermal performance, inflection points in the total heat load distribution are used as cut off criteria. Analysis of the results shows the existence of a range of critical ballistic coefficients beyond which the steepest possible entries are determined by the pressure limit of the material rather than the deceleration load limit.

  17. Basic study on the rectangular numeric keys for touch screen.

    Science.gov (United States)

    Harada, H; Katsuura, T; Kikuchi, Y

    1997-06-01

    The present study was conducted to examine the optimum inter-key spacing of numeric rectangular keys for touch screens. Six male students (22-25 years old) and three female students (21-24 years old) participated in the experiment. Each subject performed the data entry task using rectangular keys of touch devices. These keys were arranged in both horizontal and vertical layouts. The sizes of the rectangular keys in both layouts were 12 x 21 mm and 15 x 39 mm, and each of the inter-key spacing of each key was 0, 3, 6, 12 and 21 mm. The response time with inter-key spacing of 3 mm was significantly faster than with the inter-key spacing of 0, 12 and 21 mm (p < 0.05). Keys of vertical position produced faster response time than that of horizontal position. The subjective ratings showed that the inter-key spacing of 6 mm was significantly better than the inter-key spacing of 0, 3, 12 and 21 mm (p < 0.05).

  18. Does attention speed up processing? Decreases and increases of processing rates in visual prior entry.

    Science.gov (United States)

    Tünnermann, Jan; Petersen, Anders; Scharlau, Ingrid

    2015-03-02

    Selective visual attention improves performance in many tasks. Among others, it leads to "prior entry"--earlier perception of an attended compared to an unattended stimulus. Whether this phenomenon is purely based on an increase of the processing rate of the attended stimulus or if a decrease in the processing rate of the unattended stimulus also contributes to the effect is, up to now, unanswered. Here we describe a novel approach to this question based on Bundesen's Theory of Visual Attention, which we use to overcome the limitations of earlier prior-entry assessment with temporal order judgments (TOJs) that only allow relative statements regarding the processing speed of attended and unattended stimuli. Prevalent models of prior entry in TOJs either indirectly predict a pure acceleration or cannot model the difference between acceleration and deceleration. In a paradigm that combines a letter-identification task with TOJs, we show that indeed acceleration of the attended and deceleration of the unattended stimuli conjointly cause prior entry. © 2015 ARVO.

  19. Soil gas and radon entry into a simple test structure: Comparison of experimental and modelling results

    DEFF Research Database (Denmark)

    Andersen, C.E.; Søgaard-Hansen, J.; Majborn, B.

    1994-01-01

    A radon test structure has been established at a field site at Riso National Laboratory. Measurements have been made of soil gas entry rates, pressure couplings and radon depletion. The experimental results have been compared with results obtained from measured soil parameters and a two......-dimensional steady-state numerical model of Darcy flow and combined diffusive and advective transport of radon. For most probe locations, the calculated values of the pressure couplings and the radon depletion agree well with the measured values, thus verifying important elements of the Darcy flow approximation......, and the ability of the model to treat combined diffusive and advective transport of radon. However, the model gives an underestimation of the soil gas entry rate. Even if it is assumed that the soil has a permeability equal to the highest of the measured values, the model underestimates the soil gas entry rate...

  20. Modes and orders of market entry

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2012-01-01

    (first-mover or follower). Invention is understood as the conversion of human creativity, time and financial resources into new ideas. Innovation in turn reflects the practical and financial return on such investments. While there is little disagreement about what an innovator strategy is, imitative......This paper focuses on the initial questions of how and when to enter a market from the perspective of a firm. By entry mode is meant a firm’s strategy (innovation or imitation) for entering the market in response to environmental changes. Entry order refers to the related issue of market timing...... strategies are more ambiguous. Based on a corporate technology and innovation strategy perspective, the paper reconceptualises and extends existing modes and orders of market entry, and in particular clarifies the ambiguity associated with imitative strategies. Four distinct imitator strategies...

  1. Automatic Retrieval of Newly Instructed Cue-Task Associations Seen in Task-Conflict Effects in the First Trial after Cue-Task Instructions.

    Science.gov (United States)

    Meiran, Nachshon; Pereg, Maayan

    2017-01-01

    Novel stimulus-response associations are retrieved automatically even without prior practice. Is this true for novel cue-task associations? The experiment involved miniblocks comprising three phases and task switching. In the INSTRUCTION phase, two new stimuli (or familiar cues) were arbitrarily assigned as cues for up-down/right-left tasks performed on placeholder locations. In the UNIVALENT phase, there was no task cue since placeholder's location afforded one task but the placeholders were the stimuli that we assigned as task cues for the following BIVALENT phase (involving target locations affording both tasks). Thus, participants held the novel cue-task associations in memory while executing the UNIVALENT phase. Results show poorer performance in the first univalent trial when the placeholder was associated with the opposite task (incompatible) than when it was compatible, an effect that was numerically larger with newly instructed cues than with familiar cues. These results indicate automatic retrieval of newly instructed cue-task associations.

  2. Form, its meaning, and dictionary entries

    Directory of Open Access Journals (Sweden)

    Violetta Koseska-Toszewa

    2015-11-01

    It is worth stressing that distinguishing between the form and its meaning in comparing the material 6 languages belonging to three different groups of Slavic languages (as is the case in the MONDILEX Project will allow us to avoid numeorus substantiva mistakes and erroneous conclusions. Hence dictionary entries should be verified and made uniform in that respect before they are “digitalized”... Distinction between the form and its meaning in a dictionary entry is fully possible, as shown by works of Z. Saloni (2002 and A.Przepiórkowski (2008.

  3. Foreign entry, cultural barriers and learning

    NARCIS (Netherlands)

    H.G. Barkema (Harry); J.H.J. Bell (John); J.M.E. Pennings

    1996-01-01

    textabstractThis paper examines the longevity of foreign entries. Hypotheses are developed on the mode (start-ups vs. acquisitions) and ownership structure (wholly owned vs. joint ventures) in relation to cultural distance. The hypotheses are tested within a framework of organizational learning,

  4. Entry modes of European firms in Vietnam

    Directory of Open Access Journals (Sweden)

    Daniel Simonet

    2012-09-01

    Full Text Available Purpose: The purpose of the paper is to explore the entry modes of EU firms setting up operations in Vietnam. Design/methodology/approach: we use a case study approach on Haymarket, Cadbury, Creative Education, Fairchild, Aventis and Artemisinin and Farming International using interviews from managerial professionals in Vietnam. Findings: Despite the fact that Vietnam has been opening up for more than 20 years, licensing is the preferred entry mode because of the risks involved in venturing with local firms; that preference signals a low level commitment and a high perception of risk and state interference. In line with Vietnam transition to state - rather than private market - capitalism, a foreign company opting for a joint-venture will do so with a state-owned rather than privately-owned company. The choice of a subsidiary can be explained by the lack of trust in partners and institutions, not by improvement in the socio-political environment. Limitations: In determining the entry mode strategy, the paper focuses on the Uppsala school’s “psychic distance” (e.g. cultural distance, lack of trust rather than on firm-specific advantages (Rugman, 1980; 2006. Key-words: international entry mode; emerging markets; subsidiary; joint-venture; India; Vietnam

  5. Correlation Between Entry Requirements and Academic ...

    African Journals Online (AJOL)

    In this study, the investigator examines the correlation between entry requirements and academic performance of undergraduate students at the University of Buea. The quality of performance on the Cameroon General Certificate Examination at the Advanced Level is the predictor while the criterion is the cumulative grade ...

  6. Flavivirus cell entry and membrane fusion

    NARCIS (Netherlands)

    Smit, Jolanda M.; Moesker, Bastiaan; Rodenhuis-Zybert, Izabela; Wilschut, Jan

    2011-01-01

    Flaviviruses, such as dengue virus and West Nile virus, are enveloped viruses that infect cells through receptor-mediated endocytosis and fusion from within acidic endosomes. The cell entry process of flaviviruses is mediated by the viral E glycoprotein. This short review will address recent

  7. Women's Entry into Teaching: Myths and Realities.

    Science.gov (United States)

    Russell, Dorothy S.

    1979-01-01

    The author reviews the entry of women into the teaching profession in nineteenth-century America, noting that, while the primary motivation for encouraging women to teach was that they could be paid less than men, this economic justification was obscured by sentimental pronouncements about women's superior moral and nurturant power. (SJL)

  8. Perceptions regarding strategic and structural entry barriers

    NARCIS (Netherlands)

    Lutz, C.H.M.; Kemp, R.G.M.; Dijkstra, S.G.

    2010-01-01

    This article uses factor analysis to identify the underlying dimensions of strategic and structural entry barriers. We find that, in the perception of firms, both types of barriers are important and that the effectiveness of strategic barriers depends on attributes of the market structure. Based on

  9. Perceptions regarding strategic and structural entry barriers

    NARCIS (Netherlands)

    Lutz, Clemens H. M.; Kemp, Ron G. M.; Dijkstra, S. Gerhard

    This article uses factor analysis to identify the underlying dimensions of strategic and structural entry barriers. We find that, in the perception of firms, both types of barriers are important and that the effectiveness of strategic barriers depends on attributes of the market structure. Based on

  10. Infectious Entry Pathway of Enterovirus B Species

    Directory of Open Access Journals (Sweden)

    Varpu Marjomäki

    2015-12-01

    Full Text Available Enterovirus B species (EV-B are responsible for a vast number of mild and serious acute infections. They are also suspected of remaining in the body, where they cause persistent infections contributing to chronic diseases such as type I diabetes. Recent studies of the infectious entry pathway of these viruses revealed remarkable similarities, including non-clathrin entry of large endosomes originating from the plasma membrane invaginations. Many cellular factors regulating the efficient entry have recently been associated with macropinocytic uptake, such as Rac1, serine/threonine p21-activated kinase (Pak1, actin, Na/H exchanger, phospholipace C (PLC and protein kinase Cα (PKCα. Another characteristic feature is the entry of these viruses to neutral endosomes, independence of endosomal acidification and low association with acidic lysosomes. The biogenesis of neutral multivesicular bodies is crucial for their infection, at least for echovirus 1 (E1 and coxsackievirus A9 (CVA9. These pathways are triggered by the virus binding to their receptors on the plasma membrane, and they are not efficiently recycled like other cellular pathways used by circulating receptors. Therefore, the best “markers” of these pathways may be the viruses and often their receptors. A deeper understanding of this pathway and associated endosomes is crucial in elucidating the mechanisms of enterovirus uncoating and genome release from the endosomes to start efficient replication.

  11. Energy Information Data Base: corporate author entries

    International Nuclear Information System (INIS)

    1978-06-01

    The DOE Energy Information Data Base has been created and is maintained by the DOE Technical Information Center. One of the controls for information entered into the base is the standardized name of the corporate entity or the corporate author. The purpose of this list of authorized or standardized corporate entries is to provide a means for the consistent citing of the names of organizations in bibliographic records. It also serves as a guide for users who retrieve information from a bibliographic data base and who want to locate information originating in particular organizations. This authority is a combination of entries established by the Technical Information Center and the International Atomic Energy Agency's International Nuclear Information System (INIS). The format calls, in general, for the name of the organization represented by the literature being cataloged to be cited as follows: the largest element, the place, the smallest element, e.g., Brigham Young Univ., Provo, Utah (USA), Dept. of Chemical Engineering. Code numbers are assigned to each entry to provide manipulation by computer. Cross references are used to reflect name changes and invalid entries

  12. Radiation Database for Earth and Mars Entry

    Science.gov (United States)

    2008-11-17

    state which mainly determines its polarizability . ∆r2 = r2u− r2l is the difference between Radiation Database for Earth and Mars Entry RTO-EN-AVT...NO A← X (0,0) band in the presence of argon and nitrogen. Journal of Quantitative Spectroscopy and Radiative Transfer, 47:375–390, 1992. Radiation

  13. 76 FR 15841 - Entry of Merchandise

    Science.gov (United States)

    2011-03-22

    ... DEPARTMENT OF HOMELAND SECURITY Bureau of Customs and Border Protection DEPARTMENT OF THE TREASURY 19 CFR Part 141 Entry of Merchandise CFR Correction In Title 19 of the Code of Federal Regulations, Parts 141 to 199, revised as of April 1, 2010, on page 6, the second general authority citation for part...

  14. Anthropologists and Broadcasting: Roles and Entry Strategies

    Science.gov (United States)

    Eiselein, E. B.; Topper, Martin

    1976-01-01

    The article describes some of the roles open to anthropologists in radio and television. Entry strategies for occupying these roles include taking the first step in approaching the broadcast station, learning about broadcasting, and communicating anthropology to the broadcasters. (Author/NQ)

  15. Cognitive task analysis

    NARCIS (Netherlands)

    Schraagen, J.M.C.

    2000-01-01

    Cognitive task analysis is defined as the extension of traditional task analysis techniques to yield information about the knowledge, thought processes and goal structures that underlie observable task performance. Cognitive task analyses are conducted for a wide variety of purposes, including the

  16. Differential Effects of Aging on Autobiographical Memory Tasks

    Directory of Open Access Journals (Sweden)

    Katinka Dijkstra

    2016-05-01

    Full Text Available This study examined the role of aging in the recall and recognition of autobiographical memories. Young and older adults submitted personal events during a period of 3 months to an Internet diary. After this period, they performed a cued-recall test based on what, who, and where retrieval cues. Three months later, participants completed a recognition test in which the descriptions of half the entries were altered. The results indicated no age differences on the cued-recall task, but several age differences on the recognition task. Older adults were more susceptible to accept altered entries as authentic, particularly when these changes had been subtle. However, despite their lower performance, older adults were more confident with the accuracy of their decisions. The results suggest that different mechanisms underlie the recall and recognition of autobiographical memories, and that only tasks that subtly tap into source monitoring abilities are affected by cognitive aging processes.

  17. Standard work for room entry: Linking lean, hand hygiene, and patient-centeredness.

    Science.gov (United States)

    O'Reilly, Kristin; Ruokis, Samantha; Russell, Kristin; Teves, Tim; DiLibero, Justin; Yassa, David; Berry, Hannah; Howell, Michael D

    2016-03-01

    Healthcare-associated infections are costly and fatal. Substantial front-line, administrative, regulatory, and research efforts have focused on improving hand hygiene. While broad agreement exists that hand hygiene is the most important single approach to infection prevention, compliance with hand hygiene is typically only about 40%(1). Our aim was to develop a standard process for room entry in the intensive care unit that improved compliance with hand hygiene and allowed for maximum efficiency. We recognized that hand hygiene is a single step in a substantially more complicated process of room entry. We applied Lean engineering techniques to develop a standard process that included both physical steps and also standard communication elements from provider to patients and families and created a physical environment to support this. We observed meaningful improvement in the performance of the new standard as well as time savings for clinical providers with each room entry. We also observed an increase in room entries that included verbal communication and an explanation of what the clinician was entering the room to do. The design and implementation of a standardized room entry process and the creation of an environment that supports that new process has resulted in measurable positive outcomes on the medical intensive care unit, including quality, patient experience, efficiency, and staff satisfaction. Designing a process, rather than viewing tasks that need to happen in close proximity in time (either serially or in parallel) as unrelated, simplifies work for staff and results in higher compliance to individual tasks. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Technical highlights of the availability and entry projects of the U.S. Department of Energy's Radon Research Program

    International Nuclear Information System (INIS)

    Tanner, A.B.; Olsen, C.R.

    1992-01-01

    Projects concerned with 226 Rn and 222 Rn occurrence have found that: (1) severe indoor 222 Rn concentrations are associated with U-bearing shear zones; (2) surface γ ray surveys correlate with 222 Rn in soil gas; (3) sorption is important in dry soils and some building materials; (4) organically bound 226 Ra can be the principal source of 222 Rn in soil gas; and (5) passive detectors may seriously underestimate 222 Rn concentrations in the ground. Correlations enable reasonable prediction of Rn diffusion coefficient and soil permeability changes with changing soil moisture. Instrumental test structures permit monitoring the effects of important environmental variables on Rn entry. Multidimensional numerical models are being used to account for soil moisture, absorption, adsorption, diffusion and advection in Rn transport towards buildings. Other numerical models predict 222 Rn entry on the basis of 226 Rn concentration, emanation coefficient, and soil permeability, and show that the pressure gradients decrease sharply with distance from the entry cracks. (author)

  19. An Analysis of the Feasible Entry Mode for Tottenham Hotspur’s Entry into China

    OpenAIRE

    Zhang, Lei

    2013-01-01

    An increasing number of European football clubs has developed global strategies with an emphasis on the Chinese market, which seems to be a shortcut to their global success. In order to achieve an effective expansion, the selection of appropriate entry modes should be conducted cautiously. This paper aims to select feasible entry modes for Tottenham Hotspur F.C., an emerging power in the Premier League, to enter into the Chinese market. A framework that combines different theories based ...

  20. Market Entry Strategies : Case: McDonald's entry on the Russian market

    OpenAIRE

    Karataev, Oleg

    2015-01-01

    The thesis considers the entry strategy and development of the company McDonald's into international markets. The theoretical aspects of the entry strategy of the company into the international markets. Analyzes the key features of the development of McDonald's in Russia. Investigated the prospects of the company in international markets. In theoretic part there was regarded some important aspects of international strategic management, such as: strategic alternatives, elements and levels o...

  1. Variable Entry Biased Paracentric Hemispherical Deflector: Experimental results on energy resolution for different entry positions

    Science.gov (United States)

    Dogan, Mevlut; Ulu, Melike; Gennerakis, Giannis; Zouros, Theo J. M.

    2014-04-01

    A new hemispherical deflector analyzer (HDA) which is designed for electron energy analysis in atomic collisions has been constructed and tested. Using the crossed beam technique at the electron spectrometer, test measurements were performed for electron beam (200 eV) - Helium atoms interactions. These first experimental results show that the paracentric entries give almost twice as good resolution as that for the conventional entry. Supporting simulations of the entire lens+HDA spectrometer are found in relatively good agreement with experiment.

  2. On the complexity of numerical analysis

    DEFF Research Database (Denmark)

    Miltersen, Peter Bro; Allender, Eric; Burgisser, Peter

    2009-01-01

    an integer N, decide whether N>0. • In the Blum-Shub-Smale model, polynomial time computation over the reals (on discrete inputs) is polynomial-time equivalent to PosSLP, when there are only algebraic constants. We conjecture that using transcendental constants provides no additional power, beyond nonuniform...... reductions to PosSLP, and we present some preliminary results supporting this conjecture. • The Generic Task of Numerical Computation is also polynomial-time equivalent to PosSLP. We prove that PosSLP lies in the counting hierarchy. Combining this with work of Tiwari, we obtain that the Euclidean Traveling......We study two quite different approaches to understanding the complexity of fundamental problems in numerical analysis: • The Blum-Shub-Smale model of computation over the reals. • A problem we call the “Generic Task of Numerical Computation,” which captures an aspect of doing numerical computation...

  3. The Double-entry Bookkeeping Committee of 1914 and the Brazilian Public Accounting System

    Directory of Open Access Journals (Sweden)

    Tiago Villac Adde

    2014-12-01

    Full Text Available The history of Brazilian accounting has not been explored at length. Through a historical survey, this article presents the history of the Double-entry Bookkeeping Committee of 1914. After the Proclamation of the Republic was announced in 1889, the government started to expand its administrative bodies, necessitating the introduction of a bureaucracy able to perform new functions. In the same period, Brazil experienced a strong economic development with the development of its coffee industry. In 1905, under the leadership of Carlos de Carvalho, São Paulo State Treasury bookkeeping tasks were introduced under a double-entry bookkeeping system and through accrual and financial accounting. Double-entry bookkeeping practices in the federal public accounting system, although enshrined in law since 1808, were only fully realized after the creation of the Double-entry Bookkeeping Committee in 1914. In that same year, due to the negotiation of a second funding loan, English creditor bank auditors requested a balance of the National Treasury from the Minister of Finance Rivadávia Corrêa. Because the balance had not been prepared in eight years, the Double-entry Bookkeeping Committee was established in June of 1914, and this body completed a technical audit of Revenues and Expenditures. The committee also conducted the state administration's first Asset and Liability audit since the colonial era. The Double-entry Bookkeeping Committee of 1914 spearheaded changes to the Brazilian public accounting system, including the creation of the Public Accounting Code in 1922 and the approval of Central Accounting Office of the Republic regulation in 1924, strengthening and ascribing perpetuity to practices adopted after 1914.

  4. In Situ Magnetohydrodynamic Energy Generation for Planetary Entry Vehicles

    Science.gov (United States)

    Ali, H. K.; Braun, R. D.

    2014-06-01

    This work aims to study the suitability of multi-pass entry trajectories for harnessing of vehicle kinetic energy through magnetohydrodynamic power generation from the high temperature entry plasma. Potential mission configurations are analyzed.

  5. 15 CFR 2011.204 - Entry of specialty sugars.

    Science.gov (United States)

    2010-01-01

    ... UNITED STATES TRADE REPRESENTATIVE ALLOCATION OF TARIFF-RATE QUOTA ON IMPORTED SUGARS, SYRUPS AND... present a certificate to the appropriate customs official at the date of entry of specialty sugars. Entry...

  6. Task demand, task management, and teamwork

    Energy Technology Data Exchange (ETDEWEB)

    Braarud, Per Oeivind; Brendryen, Haavar

    2001-03-15

    The current approach to mental workload assessment in process control was evaluated in 3 previous HAMMLAB studies, by analysing the relationship between workload related measures and performance. The results showed that subjective task complexity rating was related to team's control room performance, that mental effort (NASA-TLX) was weakly related to performance, and that overall activity level was unrelated to performance. The results support the argument that general cognitive measures, i.e., mental workload, are weakly related to performance in the process control domain. This implies that other workload concepts than general mental workload are needed for valid assessment of human reliability and for valid assessment of control room configurations. An assessment of task load in process control suggested that how effort is used to handle task demand is more important then the level of effort invested to solve the task. The report suggests two main workload related concepts with a potential as performance predictors in process control: task requirements, and the work style describing how effort is invested to solve the task. The task requirements are seen as composed of individual task demand and team demand. In a similar way work style are seen as composed of individual task management and teamwork style. A framework for the development of the concepts is suggested based on a literature review and experiences from HAMMLAB research. It is suggested that operational definitions of workload concepts should be based on observable control room behaviour, to assure a potential for developing performance-shaping factors. Finally an explorative analysis of teamwork measures and performance in one study indicated that teamwork concepts are related to performance. This lends support to the suggested development of team demand and teamwork style as elements of a framework for the analysis of workload in process control. (Author)

  7. Dependency of radon entry on pressure difference

    International Nuclear Information System (INIS)

    Kokotti, H.; Kalliokoski, P.

    1992-01-01

    Radon levels, ventilation rate and pressure differences were monitored continuously in four apartment houses with different ventilation systems. Two of them were ventilated by mechanical exhaust, one by mechanical supply and exhaust, and one by natural ventilation. The two-storey houses were constructed from concrete elements on a slab and located on a gravel esker. It was surprising to find that increasing the ventilation rate increased levels of radon in the apartments. Increased ventilation caused increased outdoor-indoor pressure difference, which in turn increased the entry rate of radon and counteracted the diluting effect of ventilation. The increase was significant when the outdoor-indoor pressure difference exceeded 5 Pa. Especially in the houses with mechanical exhaust ventilation the pressure difference was the most important factor of radon entry rate, and contributed up to several hundred Bq m -3 h -1 . (Author)

  8. Lunar Entry Downmode Options for Orion

    Science.gov (United States)

    Smith, Kelly M.; Rea, Jeremy

    2016-01-01

    For Exploration Missions 1 and 2, the Orion capsules will be entering the Earth's atmosphere with speeds in excess of 11 km/s. In the event of a degraded Guidance, Navigation, and Control system, attempting the nominal guided entry may be inadvisable due to the potential for failures that result in a loss of vehicle (or crew, when crew are aboard). In such a case, a method of assuring Earth capture, water landing, and observence of trajectory constraints (heating, loads) is desired. Such a method should also be robust to large state uncertainty and variations in entry interface states. This document will explore four approaches evaluated and their performance in ensuring a safe return of the Orion capsule in the event of onboard system degradation.

  9. Available hardware for automated entry control

    International Nuclear Information System (INIS)

    Holmes, J.P.

    1990-01-01

    Automated entry control has become an increasingly important issue at facilities where budget constraints are limiting options for manned entry control points. Ongoing work at Sandia National Laboratories is attempting to establish a data base for use by facility security managers working the problem of how to maintain security on a limited budget. Sandia National Laboratories conducted a performance test of the following biometric verifiers: (1) voice verifier by Alpha Microsystems of Santa Ana, California; (2) signature dynamics verifier by Autosig Systems of Irving, Texas; (3) voice verifier by Ecco Industries of Danvers, Massachusetts (now International Electronics); (4) retinal pattern verifier by EyeDentify of Portland, Oregon; (5) fingerprint verifier by Identix of Sunnyvale, California; and (6) hand geometry verifier by Recognition Systems of San Jose, California

  10. Cell entry of hepatitis C virus

    International Nuclear Information System (INIS)

    Bartosch, Birke; Cosset, Francois-Loic

    2006-01-01

    Hepatitis C virus (HCV), an important human pathogen, is an enveloped, positive-stranded RNA virus classified in the hepacivirus genus of the Flaviviridae family. Cell attachment of flaviviruses generally leads to endocytosis of bound virions. Systems that support HCV replication and particle formation in vitro are emerging only now, 16 years after the discovery of the virus. Albeit this limitation, the route of HCV cell entry as well as 'capture' molecules involved in low-affinity interactions for the initial contact of HCV with target cells and potential high-affinity receptor candidates that may mediate HCV trafficking and fusion has been described. The objective of this review is to summarize the contribution of different HCV model systems to our current knowledge about structure of the HCV GPs E1 and E2 and their roles in cell entry comprising cell attachment, interactions with cellular receptors, endocytosis, and fusion

  11. Guessing lexicon entries using finite-state methods

    OpenAIRE

    Koskenniemi, Kimmo Matti

    2018-01-01

    A practical method for interactive guessing of LEXC lexicon entries is presented. The method is based on describing groups of similarly inflected words using regular expressions. The patterns are compiled into a finite-state transducer (FST) which maps any word form into the possible LEXC lexicon entries which could generate it. The same FST can be used (1) for converting conventional headword lists into LEXC entries, (2) for interactive guessing of entries, (3) for corpus-assisted interactiv...

  12. RITD - Re-entry: Inflatable Technology Development in Russian Collaboration

    Science.gov (United States)

    Heilimo, J.; Harri, A.-M.; Aleksashkin, S.; Koryanov, V.; Arruego, I.; Schmidt, W.; Haukka, H.; Finchenko, V.; Martynov, M.; Ostresko, B.; Ponomarenko, A.; Kazakovtsev, V.; Martin, S.; Siili, T.

    2014-04-01

    A new generation of inflatable Entry, Descent and Landing System (EDLS) for Mars has been developed. It is used in both the initial atmospheric entry and atmospheric descent before the semi-hard impact of the penetrator into Martian surface. The EDLS applicability to Earth's atmosphere is studied by the EU/RITD [1] project. Project focuses on the analysis and tests of the transonic behaviour of this compact and light weight payload entry system at the Earth re-entry.

  13. Entry Regulations, Product Differentiation and Determinants of Market Structure

    OpenAIRE

    Maican, Florin; Orth, ´Matilda

    2013-01-01

    We use a dynamic oligopoly model of entry and exit to evaluate how entry regulations affect profitability and market structure in retail. The model incorporates demand and store-level heterogeneity. Based on unique data for all retail food stores in Sweden, we find that the average entry costs for small and large stores are 10 and 18 percent lower, respectively, in markets with liberal compared with restrictive regulations. Counterfactual simulations show that lower entry costs in restrictive...

  14. Entry regulations, welfare and determinants of market structure

    OpenAIRE

    Maican, Florin; Orth, Matilda

    2015-01-01

    We use a dynamic oligopoly model of entry and exit with store-type differentiation to evaluate how entry regulations affect profitability, market structure and welfare. Based on unique data for all retail food stores in Sweden, we estimate demand, recover variable profits, and estimate entry costs and fixed costs by store type. Counterfactual policy experiments show that welfare increases when competition is enhanced by lower entry costs. Protecting small stores by imposing licensing fees on ...

  15. ABLATION AND CHEMICAL ALTERATION OF COSMIC DUST PARTICLES DURING ENTRY INTO THE EARTH’S ATMOSPHERE

    Energy Technology Data Exchange (ETDEWEB)

    Rudraswami, N. G.; Prasad, M. Shyam; Dey, S.; Fernandes, D. [National Institute of Oceanography (Council of Scientific and Industrial Research), Dona Paula, Goa 403004 (India); Plane, J. M. C.; Feng, W.; Carrillo-Sánchez, J. D., E-mail: rudra@nio.org [School of Chemistry, University of Leeds, Leeds LS2 9JT (United Kingdom)

    2016-12-01

    Most dust-sized cosmic particles undergo ablation and chemical alteration during atmospheric entry, which alters their original properties. A comprehensive understanding of this process is essential in order to decipher their pre-entry characteristics. The purpose of the study is to illustrate the process of vaporization of different elements for various entry parameters. The numerical results for particles of various sizes and various zenith angles are treated in order to understand the changes in chemical composition that the particles undergo as they enter the atmosphere. Particles with large sizes (> few hundred μ m) and high entry velocities (>16 km s{sup −1}) experience less time at peak temperatures compared to those that have lower velocities. Model calculations suggest that particles can survive with an entry velocity of 11 km s{sup −1} and zenith angles (ZA) of 30°–90°, which accounts for ∼66% of the region where particles retain their identities. Our results suggest that the changes in chemical composition of MgO, SiO{sub 2}, and FeO are not significant for an entry velocity of 11 km s{sup −1} and sizes <300 μ m, but the changes in these compositions become significant beyond this size, where FeO is lost to a major extent. However, at 16 km s{sup −1} the changes in MgO, SiO{sub 2}, and FeO are very intense, which is also reflected in Mg/Si, Fe/Si, Ca/Si, and Al/Si ratios, even for particles with a size of 100 μ m. Beyond 400 μ m particle sizes at 16 km s{sup −1}, most of the major elements are vaporized, leaving the refractory elements, Al and Ca, suspended in the troposphere.

  16. ABLATION AND CHEMICAL ALTERATION OF COSMIC DUST PARTICLES DURING ENTRY INTO THE EARTH’S ATMOSPHERE

    International Nuclear Information System (INIS)

    Rudraswami, N. G.; Prasad, M. Shyam; Dey, S.; Fernandes, D.; Plane, J. M. C.; Feng, W.; Carrillo-Sánchez, J. D.

    2016-01-01

    Most dust-sized cosmic particles undergo ablation and chemical alteration during atmospheric entry, which alters their original properties. A comprehensive understanding of this process is essential in order to decipher their pre-entry characteristics. The purpose of the study is to illustrate the process of vaporization of different elements for various entry parameters. The numerical results for particles of various sizes and various zenith angles are treated in order to understand the changes in chemical composition that the particles undergo as they enter the atmosphere. Particles with large sizes (> few hundred μ m) and high entry velocities (>16 km s −1 ) experience less time at peak temperatures compared to those that have lower velocities. Model calculations suggest that particles can survive with an entry velocity of 11 km s −1 and zenith angles (ZA) of 30°–90°, which accounts for ∼66% of the region where particles retain their identities. Our results suggest that the changes in chemical composition of MgO, SiO 2 , and FeO are not significant for an entry velocity of 11 km s −1 and sizes <300 μ m, but the changes in these compositions become significant beyond this size, where FeO is lost to a major extent. However, at 16 km s −1 the changes in MgO, SiO 2 , and FeO are very intense, which is also reflected in Mg/Si, Fe/Si, Ca/Si, and Al/Si ratios, even for particles with a size of 100 μ m. Beyond 400 μ m particle sizes at 16 km s −1 , most of the major elements are vaporized, leaving the refractory elements, Al and Ca, suspended in the troposphere.

  17. Incumbent innovation and entry by spinoff

    OpenAIRE

    Falck, Oliver; Heblich, Stephan

    2008-01-01

    This paper takes a different perspective toward the escape entry incentive of incumbent firms to innovate. New entrants spawned from incumbents are not necessarily a threat; they can complement incumbents' production by commercializing knowledge incumbents are not willing or able to exploit. Accordingly, incumbent innovation determines exploitable knowledge externalities for spinoffs while, at the same time, spinoffs are expected to influence incumbent innovation. To overcome this problem of ...

  18. Advertising, Competition and Entry in Media Industries

    OpenAIRE

    Crampes, Claude; Haritchabalet, Carole; Jullien, Bruno

    2006-01-01

    This paper presents a model of media competition with free entry when media operators are financed both from advertisers and customers. The relation between advertising receipts and sales receipts, which are both complementary and antagonist, is different if media operators impose a price or a quantity to advertisers. When consumers dislike advertising, media operators are better off setting an advertising price than an advertising quantity. We establish a relationship between the equilibrium...

  19. System for histogram entry, retrieval, and plotting

    International Nuclear Information System (INIS)

    Kellogg, M.; Gallup, J.M.; Shlaer, S.; Spencer, N.

    1977-10-01

    This manual describes the systems for producing histograms and dot plots that were designed for use in connection with the Q general-purpose data-acquisition system. These systems allow for the creation of histograms; the entry, retrieval, and plotting of data in the form of histograms; and the dynamic display of scatter plots as data are acquired. Although the systems are designed for use with Q, they can also be used as a part of other applications. 3 figures

  20. Numerical Optimization in Microfluidics

    DEFF Research Database (Denmark)

    Jensen, Kristian Ejlebjærg

    2017-01-01

    Numerical modelling can illuminate the working mechanism and limitations of microfluidic devices. Such insights are useful in their own right, but one can take advantage of numerical modelling in a systematic way using numerical optimization. In this chapter we will discuss when and how numerical...... optimization is best used....

  1. Methods of numerical relativity

    International Nuclear Information System (INIS)

    Piran, T.

    1983-01-01

    Numerical Relativity is an alternative to analytical methods for obtaining solutions for Einstein equations. Numerical methods are particularly useful for studying generation of gravitational radiation by potential strong sources. The author reviews the analytical background, the numerical analysis aspects and techniques and some of the difficulties involved in numerical relativity. (Auth.)

  2. Filovirus tropism: Cellular molecules for viral entry

    Directory of Open Access Journals (Sweden)

    Ayato eTakada

    2012-02-01

    Full Text Available In human and nonhuman primates, filoviruses (Ebola and Marburg viruses cause severe hemorrhagic fever.Recently, other animals such as pigs and some species of fruit bats have also been shown to be susceptible to these viruses. While having a preference for some cell types such as hepatocytes, endothelial cells, dendritic cells, monocytes, and macrophages, filoviruses are known to be pantropic in infection of primates. The envelope glycoprotein (GP is responsible for both receptor binding and fusion of the virus envelope with the host cell membrane. It has been demonstrated that filovirus GP interacts with multiple molecules for entry into host cells, whereas none of the cellular molecules so far identified as a receptor/coreceptor fully explains filovirus tissue tropism and host range. Available data suggest that the mucin-like region (MLR on GP plays an important role in attachment to the preferred target cells, whose infection is likely involved in filovirus pathogenesis, whereas the MLR is not essential for the fundamental function of the GP in viral entry into cells in vitro. Further studies elucidating the mechanisms of cellular entry of filoviruses may shed light on the development of strategies for prophylaxis and treatment of Ebola and Marburg hemorrhagic fevers.

  3. 31 CFR 337.6 - Conversions to book-entry.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Conversions to book-entry. 337.6... HOUSING ADMINISTRATION DEBENTURES Certificated Debentures § 337.6 Conversions to book-entry. Upon implementation of the book-entry debenture system, to be announced in advance by separate public notice, all new...

  4. 32 CFR 643.11 - Rights of entry.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Rights of entry. 643.11 Section 643.11 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE General § 643.11 Rights of entry. Pending the signing of the formal instrument, no right of entry will be...

  5. 19 CFR 141.18 - Entry by nonresident corporation.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Entry by nonresident corporation. 141.18 Section....18 Entry by nonresident corporation. A nonresident corporation (i.e., one which is not incorporated... entry is located who is authorized to accept service of process against that corporation or, in the case...

  6. 19 CFR 151.63 - Information on entry summary.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Information on entry summary. 151.63 Section 151.63 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF... Information on entry summary. Each entry summary covering wool or hair subject to duty at a rate per clean...

  7. Atmospheric Entry Studies for Venus Missions: 45 deg Sphere-Cone Rigid Aeroshells and Ballistic Entries

    Science.gov (United States)

    Prabu, Dinesh K.; Allen, Gary A., Jr.; Cappuccio, Gelsomina; Spilker, Thomas R.; Hwang, Helen H.; Moses, Robert W.

    2013-01-01

    The present study considers ballistic entries into the atmosphere of Venus using a 45deg sphere-cone rigid aeroshell, a legacy shape that has been used successfully in the past in the Pioneer Venus Multiprobe Mission. For a number of entry mass and capsule diameter combinations (i.e., various ballistic coefficients) and entry velocities, the trajectory space in terms of entry flight path angles between skip out and -30 is explored with a 3DOF trajectory code, TRAJ. Assuming that the thermal protection material of choice is carbon phenolic of flight heritage, the entry flight path angle space is constrained a posteriori by the mechanical and thermal performance parameters of the material. For mechanical performance, a 200 g limit is placed on the peak deceleration load and 10 bar is assumed as the limit for heritage carbon-phenolic material. It is shown that both constraints cannot be active simultaneously. For thermal performance, a heat flux 2.5 kW/sq cm is utilized as a threshold below which the heritage carbon phenolic is considered mass inefficient. Using these constraints, viable entry flight path angle corridors are determined. Analysis of the results also hints at the existence of a range of "critical" ballistic coefficients beyond which the steepest possible entries are determined by the pressure limit of 10 bar. The results are verified against known performance of the various probes used in the Pioneer Venus mission. It is anticipated that the results presented here will serve as a baseline in the development of a new class of ablative materials for future Venus missions.

  8. Attacking 22 entries in rugby union: running demands and differences between successful and unsuccessful entries.

    Science.gov (United States)

    Tierney, P; Tobin, D P; Blake, C; Delahunt, E

    2017-12-01

    Global Positioning System (GPS) technology is commonly utilized in team sports, including rugby union. It has been used to describe the average running demands of rugby union. This has afforded an enhanced understanding of the physical fitness requirements for players. However, research in team sports has suggested that training players relative to average demands may underprepare them for certain scenarios within the game. To date, no research has investigated the running demands of attacking 22 entries in rugby union. Additionally, no research has been undertaken to determine whether differences exist in the running intensity of successful and unsuccessful attacking 22 entries in rugby union. The first aim of this study was to describe the running intensity of attacking 22 entries. The second aim of this study was to investigate whether differences exist in the running intensity of successful and unsuccessful attacking 22 entries. Running intensity was measured using meters per minute (m min -1 ) for (a) total distance, (b) running distance, (c) high-speed running distance, and (d) very high-speed running distance. This study provides normative data for the running intensity of attacking 22 entries in rugby union. Forwards achieved greater high-speed running intensity in successful (3.6 m min -1 ) compared to unsuccessful (1.8 m min -1 ) attacking 22 entries. Forwards should try and achieve greater high-speed running intensity in attacking 22 entries to increase the likelihood of successful outcomes during this period of gameplay. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Project Tasks in Robotics

    DEFF Research Database (Denmark)

    Sørensen, Torben; Hansen, Poul Erik

    1998-01-01

    Description of the compulsary project tasks to be carried out as a part of DTU course 72238 Robotics......Description of the compulsary project tasks to be carried out as a part of DTU course 72238 Robotics...

  10. Preentry communication design elements for outer planets atmospheric entry probe

    Science.gov (United States)

    1976-01-01

    Four related tasks are discussed for data transmission from a probe prior to entering the atmosphere of Jupiter to an orbiting spacecraft in a trajectory past the planet: (1) link analysis and design; (2) system conceptual design; (3) Doppler measurement analysis; and (4) an electronically despun antenna. For tasks 1, 3, and 4, an analytical approach was developed and combined with computational capability available to produce quantitative results corresponding to requirements and constraints given by NASA, ARC. One constraint having a major impact on the numerical results of the link analysis was the assumption of a nonsteerable antenna on a spinning orbiter. Other constraints included the interplanetary trajectory and the approach trajectory. Because the Jupiter Orbiter Probe (JOP) program is currently in a state of evolution, all requirements and constraints applied during this study are subject to change. However, the relationships of parameters as developed will remain valid and will aid in planning Jupiter missions.

  11. Task assignment and coaching

    OpenAIRE

    Dominguez-Martinez, S.

    2009-01-01

    An important task of a manager is to motivate her subordinates. One way in which a manager can give incentives to junior employees is through the assignment of tasks. How a manager allocates tasks in an organization, provides information to the junior employees about his ability. Without coaching from a manager, the junior employee only has information about his past performance. Based on his past performance, a talented junior who has performed a difficult task sometimes decides to leave the...

  12. Functional Task Test (FTT)

    Science.gov (United States)

    Bloomberg, Jacob J.; Mulavara, Ajitkumar; Peters, Brian T.; Rescheke, Millard F.; Wood, Scott; Lawrence, Emily; Koffman, Igor; Ploutz-Snyder, Lori; Spiering, Barry A.; Feeback, Daniel L.; hide

    2009-01-01

    This slide presentation reviews the Functional Task Test (FTT), an interdisciplinary testing regimen that has been developed to evaluate astronaut postflight functional performance and related physiological changes. The objectives of the project are: (1) to develop a set of functional tasks that represent critical mission tasks for the Constellation Program, (2) determine the ability to perform these tasks after space flight, (3) Identify the key physiological factors that contribute to functional decrements and (4) Use this information to develop targeted countermeasures.

  13. Finger-Based Numerical Skills Link Fine Motor Skills to Numerical Development in Preschoolers.

    Science.gov (United States)

    Suggate, Sebastian; Stoeger, Heidrun; Fischer, Ursula

    2017-12-01

    Previous studies investigating the association between fine-motor skills (FMS) and mathematical skills have lacked specificity. In this study, we test whether an FMS link to numerical skills is due to the involvement of finger representations in early mathematics. We gave 81 pre-schoolers (mean age of 4 years, 9 months) a set of FMS measures and numerical tasks with and without a specific finger focus. Additionally, we used receptive vocabulary and chronological age as control measures. FMS linked more closely to finger-based than to nonfinger-based numerical skills even after accounting for the control variables. Moreover, the relationship between FMS and numerical skill was entirely mediated by finger-based numerical skills. We concluded that FMS are closely related to early numerical skill development through finger-based numerical counting that aids the acquisition of mathematical mental representations.

  14. High energy physics program: Task A, Experiment and theory; Task B, Numerical simulation

    International Nuclear Information System (INIS)

    1993-01-01

    This report discusses research in High Energy Physics at Florida State University. Contained in this paper are: highlights of activities during the past few years; five year summary; fixed target experiments; collider experiments; SSC preparation, detector development and detector construction; computing, networking and VAX upgrade to ALPHA; and particle theory programs

  15. Task assignment and coaching

    NARCIS (Netherlands)

    Dominguez-Martinez, S.

    2009-01-01

    An important task of a manager is to motivate her subordinates. One way in which a manager can give incentives to junior employees is through the assignment of tasks. How a manager allocates tasks in an organization, provides information to the junior employees about his ability. Without coaching

  16. [Is the ICU staff satisfied with the computerized physician order entry? A cross-sectional survey study].

    Science.gov (United States)

    Fumis, Renata Rego Lins; Costa, Eduardo Leite Vieira; Martins, Paulo Sergio; Pizzo, Vladimir; Souza, Ivens Augusto; Schettino, Guilherme de Paula Pinto

    2014-01-01

    To evaluate the satisfaction of the intensive care unit staff with a computerized physician order entry and to compare the concept of the computerized physician order entry relevance among intensive care unit healthcare workers. We performed a cross-sectional survey to assess the satisfaction of the intensive care unit staff with the computerized physician order entry in a 30-bed medical/surgical adult intensive care unit using a self-administered questionnaire. The questions used for grading satisfaction levels were answered according to a numerical scale that ranged from 1 point (low satisfaction) to 10 points (high satisfaction). The majority of the respondents (n=250) were female (66%) between the ages of 30 and 35 years of age (69%). The overall satisfaction with the computerized physician order entry scored 5.74±2.14 points. The satisfaction was lower among physicians (n=42) than among nurses, nurse technicians, respiratory therapists, clinical pharmacists and diet specialists (4.62±1.79 versus 5.97±2.14, phealthcare workers were satisfied, albeit not entirely, with the computerized physician order entry. The overall users' satisfaction with computerized physician order entry was lower among physicians compared to other healthcare professionals. The factors associated with satisfaction included the belief that digitalization decreased the workload and contributed to the intensive care unit quality with a user-friendly and accurate system and that digitalization provided concise information within a reasonable time frame.

  17. Exporting Complex Digital Products: Motives and Entry Modes

    DEFF Research Database (Denmark)

    Rask, Morten

    2005-01-01

    When the product is digital, it will most often be distributed directly to the customer through the Internet, and therefore the entry modes, considered in this paper, are different flavors of the entry mode called direct export: Virtual export channel are generally understood as the entry mode fo...... for digital product providers. However other types of entry modes like what wee call direct digital export with F2F-sales, direct digital export with F2F-support and virtual sales subsidiary are entry modes that respond to a higher degree of pre- and after-sales complexity....

  18. Some Numerical Characteristics of Image Texture

    Directory of Open Access Journals (Sweden)

    O. Samarina

    2012-05-01

    Full Text Available Texture classification is one of the basic images processing tasks. In this paper we present some numerical characteristics to the images analysis and processing. It can be used at the solving of images classification problems, their recognition, problems of remote sounding, biomedical images analysis, geological researches.

  19. Effects of Froude number and geometry on water entry of a 2-D ellipse

    Science.gov (United States)

    Zhang, Xu; Liu, Pei-qing; Qu, Qiu-lin; Wang, Rui; Agarwal, Ramesh K.

    2018-05-01

    By using the finite volume method with volume of fluid model and global dynamic mesh technique, the effects of Froude number and geometry on the water entry process of a 2-D ellipse are investigated numerically. For the time history of the vertical force, the computational fluid dynamics (CFD) results match the experimental data much better than the classical potential-flow theories due to the consideration of the viscosity, turbulence, surface tension, gravity, and compressibility. The results show that the position of peak pressure on ellipse shifts from the spray root to the bottom of ellipse at a critical time. The critical time changes with the geometry and Froude number. By studying the vertical force, the ellipse water entry process can be divided into the initial and late stages based on the critical dimensionless time of about 0.1. The geometry of the ellipse plays a dominant role in the initial stage, while the Froude number is more important in the late stage of entry. The classical Wagner theory is extended to the ellipse water entry, and the predicted maximum value of vertical force coefficient in the initial stage is 4πa/b that matches the CFD results very well, where a and b are the horizontal axis and vertical axis of the ellipse parallel and perpendicular to the initial calm water surface, respectively.

  20. Competitive Dynamics of Market Entry: Scale and Survival

    Directory of Open Access Journals (Sweden)

    John W. UPSON

    2017-06-01

    Full Text Available Market entry is the essence of strategy and is largely viewed as a dichotomous event: entry or no entry. What has not been acknowledged is the uniqueness of each market entry. Our study highlights the scale of market entry in the context of multipoint competition. We assert that entry scale varies based on the risk of market incumbent retaliation. Theory suggests that when risk associated with retaliation are low, firms enter with large scale and when associated risks are high, firms enter with low scale. Further, survival is viewed as dependent on following theory. We argue and find supporting evidence that firms behave in the opposite manner and do so to their own benefit, thereby revealing a unique discrepancy between theory and practice among 75 product market entries by 27 firms.

  1. Hepatitis C virus utilizes VLDLR as a novel entry pathway.

    Science.gov (United States)

    Ujino, Saneyuki; Nishitsuji, Hironori; Hishiki, Takayuki; Sugiyama, Kazuo; Takaku, Hiroshi; Shimotohno, Kunitada

    2016-01-05

    Various host factors are involved in the cellular entry of hepatitis C virus (HCV). In addition to the factors previously reported, we discovered that the very-low-density lipoprotein receptor (VLDLR) mediates HCV entry independent of CD81. Culturing Huh7.5 cells under hypoxic conditions significantly increased HCV entry as a result of the expression of VLDLR, which was not expressed under normoxic conditions in this cell line. Ectopic VLDLR expression conferred susceptibility to HCV entry of CD81-deficient Huh7.5 cells. Additionally, VLDLR-mediated HCV entry was not affected by the knockdown of cellular factors known to act as HCV receptors or HCV entry factors. Because VLDLR is expressed in primary human hepatocytes, our results suggest that VLDLR functions in vivo as an HCV receptor independent of canonical CD81-mediated HCV entry.

  2. Improving secondary prevention screening in clinical encounters using mhealth among prelicensure master's entry clinical nursing students.

    Science.gov (United States)

    FitzGerald, Leah Z; Rorie, Anne; Salem, Benissa E

    2015-04-01

    To determine the feasibility and acceptability of a mHealth application among nursing students for health promotion and secondary prevention health recommendations for hospitalized adult patients. A pretest-posttest design with a convenience sample of 169 prelicensure master's entry clinical nursing students in a large urban public university. Survey questions assessed intention to use, perceived usefulness, perceived ease of use, subjective norm, voluntariness, clinical area relevance, output quality, and result demonstrability of the United States Preventive Services Task Force (USPSTF) evidence-based practice guidelines via the mHealth application. Descriptive statistics and frequencies were used to explore sociodemographics; paired t-tests were used to evaluate pre- and posttest differences. Pre- and posttest significant differences (p technology among prelicensure master's entry clinical nursing students in order to engage and foster translational learning and improve dissemination of secondary prevention screening guidelines among hospitalized patients. © 2015 Sigma Theta Tau International.

  3. Cardiac re-entry dynamics and self-termination in DT-MRI based model of Human Foetal Heart

    Science.gov (United States)

    Biktasheva, Irina V.; Anderson, Richard A.; Holden, Arun V.; Pervolaraki, Eleftheria; Wen, Fen Cai

    2018-02-01

    The effect of human foetal heart geometry and anisotropy on anatomy induced drift and self-termination of cardiac re-entry is studied here in MRI based 2D slice and 3D whole heart computer simulations. Isotropic and anisotropic models of 20 weeks of gestational age human foetal heart obtained from 100μm voxel diffusion tensor MRI data sets were used in the computer simulations. The fiber orientation angles of the heart were obtained from the orientation of the DT-MRI primary eigenvectors. In a spatially homogeneous electrophysiological monodomain model with the DT-MRI based heart geometries, cardiac re-entry was initiated at a prescribed location in a 2D slice, and in the 3D whole heart anatomy models. Excitation was described by simplified FitzHugh-Nagumo kinetics. In a slice of the heart, with propagation velocity twice as fast along the fibres than across the fibers, DT-MRI based fiber anisotropy changes the re-entry dynamics from pinned to an anatomical re-entry. In the 3D whole heart models, the fiber anisotropy changes cardiac re-entry dynamics from a persistent re-entry to the re-entry self-termination. The self-termination time depends on the re-entry’s initial position. In all the simulations with the DT-MRI based cardiac geometry, the anisotropy of the myocardial tissue shortens the time to re-entry self-termination several folds. The numerical simulations depend on the validity of the DT-MRI data set used. The ventricular wall showed the characteristic transmural rotation of the helix angle of the developed mammalian heart, while the fiber orientation in the atria was irregular.

  4. PDBsum: Structural summaries of PDB entries

    OpenAIRE

    Laskowski, Roman A.; Jabłońska, Jagoda; Pravda, Lukáš; Vařeková, Radka Svobodová; Thornton, Janet M.

    2017-01-01

    Abstract PDBsum is a web server providing structural information on the entries in the Protein Data Bank (PDB). The analyses are primarily image‐based and include protein secondary structure, protein‐ligand and protein‐DNA interactions, PROCHECK analyses of structural quality, and many others. The 3D structures can be viewed interactively in RasMol, PyMOL, and a JavaScript viewer called 3Dmol.js. Users can upload their own PDB files and obtain a set of password‐protected PDBsum analyses for e...

  5. The Timing of Entry into New Markets

    OpenAIRE

    Debra J. Aron

    1991-01-01

    Under what circumstances will a successful incumbent in a related market be the first to enter a new market? We present a model in which the order of entry into new markets has long run effects on the firms' profits. We assume that a firm that is successfully producing in a related market has valuable information about the demand in the new market. By his choice of location in product space in the new market the incumbent reveals information about the demand to the potential entrant. Thus, th...

  6. PDBsum: Structural summaries of PDB entries.

    Science.gov (United States)

    Laskowski, Roman A; Jabłońska, Jagoda; Pravda, Lukáš; Vařeková, Radka Svobodová; Thornton, Janet M

    2018-01-01

    PDBsum is a web server providing structural information on the entries in the Protein Data Bank (PDB). The analyses are primarily image-based and include protein secondary structure, protein-ligand and protein-DNA interactions, PROCHECK analyses of structural quality, and many others. The 3D structures can be viewed interactively in RasMol, PyMOL, and a JavaScript viewer called 3Dmol.js. Users can upload their own PDB files and obtain a set of password-protected PDBsum analyses for each. The server is freely accessible to all at: http://www.ebi.ac.uk/pdbsum. © 2017 The Protein Society.

  7. Business entry and window of opportunity

    DEFF Research Database (Denmark)

    Tegtmeier, Silke; Kurczewska, Agnieszka

    2017-01-01

    with a positive influence, namely having an entrepreneurial role model and having attended seminars about starting a business. In our model, these factors support waiting longer before starting a business. In light of these results, we call for a more experimental approach in entrepreneurship education.......This paper explores the nascence period - the time between idea generation and business entry -among women entrepreneurs with a graduate degree. To address this research problem and to better understand the specifics of a window of opportunity, we combine selected theories of human and social...

  8. Probabilistic numerics and uncertainty in computations.

    Science.gov (United States)

    Hennig, Philipp; Osborne, Michael A; Girolami, Mark

    2015-07-08

    We deliver a call to arms for probabilistic numerical methods : algorithms for numerical tasks, including linear algebra, integration, optimization and solving differential equations, that return uncertainties in their calculations. Such uncertainties, arising from the loss of precision induced by numerical calculation with limited time or hardware, are important for much contemporary science and industry. Within applications such as climate science and astrophysics, the need to make decisions on the basis of computations with large and complex data have led to a renewed focus on the management of numerical uncertainty. We describe how several seminal classic numerical methods can be interpreted naturally as probabilistic inference. We then show that the probabilistic view suggests new algorithms that can flexibly be adapted to suit application specifics, while delivering improved empirical performance. We provide concrete illustrations of the benefits of probabilistic numeric algorithms on real scientific problems from astrometry and astronomical imaging, while highlighting open problems with these new algorithms. Finally, we describe how probabilistic numerical methods provide a coherent framework for identifying the uncertainty in calculations performed with a combination of numerical algorithms (e.g. both numerical optimizers and differential equation solvers), potentially allowing the diagnosis (and control) of error sources in computations.

  9. RAFCON: A Graphical Tool for Engineering Complex, Robotic Tasks

    Science.gov (United States)

    2016-10-09

    manipulation , vision, navigation, etc.). All these components need to be coordi- nated both in terms of communication and task flow. ROS [1] is a common...editing, is an important supportive feature of a programming tool for robots. How- ever, this is not an easy feature to achieve, as bigger state... children of a HierarchyState can be considered as a flat state machine on its own with a single entry state. ConcurrencyStates are also ContainerStates

  10. A Cognitive Analysis of Armor Procedural Task Training

    Science.gov (United States)

    1982-03-01

    Verbal Behavior, 8, 323-343. Craik , F. I. M., & Lockhart , R. S. (1972). Levels of processing : A framework for memory research. Journal of Verbal Learning...concep- tual or meaningful) coding of the task to be learned (e.g., Bjork, 1975; Craik & Lockhart , 1972; Melton & Martin, 1972). In order to remember a...were several serious problems with applying this approach in the context of entry- level military training. In particular, the soldier did not always

  11. Energy Data Base corporate author entries

    International Nuclear Information System (INIS)

    Hendricks, P.L.

    1984-04-01

    The US Department of Energy is one of three agencies funding the major portion of government-supported research. One of the ways to locate the results of this research is to find reports in the Energy Data Base (EDB), the comprehensive data base of the Office of Scientific and Technical Information, Technical Information Center, and in publications derived therefrom by referring to the corporate organization performing the research. This information field has been established as an index point retrievable in on-line searching and is included as an index in printed publications. To provide consistent citing of names in bibliographic entries, this authority has been created and maintained as a means of entry of corporate names into the EDB. To locate such information, one can (1) use the seven-digit code number assigned to the corporate entity of interest (enter, for example, IC=9506086) or (2) use one word at a time from the corporate name given (enter, for example, CS=Dominion)

  12. Transport Task Force Leadership, Task 4

    International Nuclear Information System (INIS)

    Callen, J.D.

    1991-07-01

    The Transport Task Force (TTF) was initiated as a broad-based US magnetic fusion community activity during the fall of 1988 to focus attention on and encourage development of an increased understanding of anomalous transport in tokamaks. The overall TTF goal is to make progress on Characterizing, Understanding and Identifying how to Reduce plasma transport in tokamaks -- to CUIR transport

  13. 75 FR 82241 - Technical Correction: Completion of Entry and Entry Summary-Declaration of Value

    Science.gov (United States)

    2010-12-30

    ... Entry Summary-- Declaration of Value AGENCY: Customs and Border Protection, Department of Homeland... manner by which the declared transaction value on imported merchandise was determined. This requirement... whether the transaction value of imported merchandise is determined on the basis of the price paid by the...

  14. Improved MPSP Method-based Cooperative Re-entry Guidance for Hypersonic Gliding Vehicles

    Directory of Open Access Journals (Sweden)

    Chu Haiyan

    2017-01-01

    Full Text Available A computationally sufficient technique is used to solve the 3-D cooperative re-entry guidance problem for hypersonic gliding vehicles. Due to the poor surrounding adaptive ability of the traditional cooperative guidance methods, a novel methodology, named as model predictive static programming (MPSP, is used to solve a class of finite-horizon optimal control problems with hard terminal constraints. The main feature of this guidance law is that it is capable of hitting the target with high accuracy for each one of the cooperative vehicles at the same time. In addition, it accurately satisfies variable constraints. Performance of the proposed MPSP-based guidance is demonstrated in 3-D nonlinear dynamics scenario. The numerical simulation results show that the proposed cooperative re-entry guidance methodology has the advantage of computational efficiency and better robustness against the perturbations.

  15. Task 7: ADPAC User's Manual

    Science.gov (United States)

    Hall, E. J.; Topp, D. A.; Delaney, R. A.

    1996-01-01

    The overall objective of this study was to develop a 3-D numerical analysis for compressor casing treatment flowfields. The current version of the computer code resulting from this study is referred to as ADPAC (Advanced Ducted Propfan Analysis Codes-Version 7). This report is intended to serve as a computer program user's manual for the ADPAC code developed under Tasks 6 and 7 of the NASA Contract. The ADPAC program is based on a flexible multiple- block grid discretization scheme permitting coupled 2-D/3-D mesh block solutions with application to a wide variety of geometries. Aerodynamic calculations are based on a four-stage Runge-Kutta time-marching finite volume solution technique with added numerical dissipation. Steady flow predictions are accelerated by a multigrid procedure. An iterative implicit algorithm is available for rapid time-dependent flow calculations, and an advanced two equation turbulence model is incorporated to predict complex turbulent flows. The consolidated code generated during this study is capable of executing in either a serial or parallel computing mode from a single source code. Numerous examples are given in the form of test cases to demonstrate the utility of this approach for predicting the aerodynamics of modem turbomachinery configurations.

  16. "Photographing money" task pricing

    Science.gov (United States)

    Jia, Zhongxiang

    2018-05-01

    "Photographing money" [1]is a self-service model under the mobile Internet. The task pricing is reasonable, related to the success of the commodity inspection. First of all, we analyzed the position of the mission and the membership, and introduced the factor of membership density, considering the influence of the number of members around the mission on the pricing. Multivariate regression of task location and membership density using MATLAB to establish the mathematical model of task pricing. At the same time, we can see from the life experience that membership reputation and the intensity of the task will also affect the pricing, and the data of the task success point is more reliable. Therefore, the successful point of the task is selected, and its reputation, task density, membership density and Multiple regression of task positions, according to which a nhew task pricing program. Finally, an objective evaluation is given of the advantages and disadvantages of the established model and solution method, and the improved method is pointed out.

  17. Board Task Performance

    DEFF Research Database (Denmark)

    Minichilli, Alessandro; Zattoni, Alessandro; Nielsen, Sabina

    2012-01-01

    identify three board processes as micro-level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings....... The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes...... and board task performance....

  18. Analytic Development of a Reference Profile for the First Entry in a Skip Atmospheric Entry

    Science.gov (United States)

    Garcia-Llama, Eduardo

    2010-01-01

    This note shows that a feasible reference drag profile for the first entry portion of a skip entry can be generated as a polynomial expression of the velocity. The coefficients of that polynomial are found through the resolution of a system composed of m + 1 equations, where m is the degree of the drag polynomial. It has been shown that a minimum of five equations (m = 4) are required to establish the range and the initial and final conditions on velocity and flight path angle. It has been shown that at least one constraint on the trajectory can be imposed through the addition of one extra equation in the system, which must be accompanied by the increase in the degree of the drag polynomial. In order to simplify the resolution of the system of equations, the drag was considered as being a probability density function of the velocity, with the velocity as a distribution function of the drag. Combining this notion with the introduction of empirically derived constants, it has been shown that the system of equations required to generate the drag profile can be successfully reduced to a system of linear algebraic equations. For completeness, the resulting drag profiles have been flown using the feedback linearization method of differential geometric control as a guidance law with the error dynamics of a second order homogeneous equation in the form of a damped oscillator. Satisfactory results were achieved when the gains in the error dynamics were changed at a certain point along the trajectory that is dependent on the velocity and the curvature of the drag as a function of the velocity. Future work should study the capacity to update the drag profile in flight when dispersions are introduced. Also, future studies should attempt to link the first entry, as presented and controlled in this note, with a more standard control concept for the second entry, such as the Apollo entry guidance, to try to assess the overall skip entry performance. A guidance law that includes

  19. Aerothermodynamics of generic re-entry vehicle with a series of aerospikes at nose

    Science.gov (United States)

    Yadav, Rajesh; Velidi, Gurunadh; Guven, Ugur

    2014-03-01

    Re-entry of a blunt nosed vehicle is one of the most intriguing problems in any space programme. Especially in light of various space tourism possibilities, there are many works concerning re-entry of commercial blunt nosed space vehicles. In this paper, a generic blunt body re-entry model represented by a hemisphere-cylinder, fitted axisymmetrically with an aerodisk aerospike at the nose is investigated numerically with commercially available control volume based axisymmetric flow solver. The scaled down re-entry model has a base diameter of 40 mm and an overall length of 100 mm. A 6 mm diameter aerospike fitted axisymmetrically at the nose has a hemispherical cap from which another aerospike of 4 mm diameter protrudes which again has a hemispherical cap. Two dimensional compressible, axisymmetric Navier Stokes Equations are solved for a turbulent hypersonic flow of a 5 species, chemically reacting air in thermal equilibrium with free stream conditions of Mach no., static pressure and temperature of 10.1, 16,066 Pa and 216.65 K, respectively. The results are compared with that of re-entry model without any aerospike. Among the cases investigated, the spiked blunt body having two aerospikes in series with lengths l1 and l2 equal to 30 and 20 respectively and overall length-to-diameter ratio of 1.5 showed a favourable reduction in the peak reattachment heat flux along with high reduction in aerodynamic drag and thus stands as a prospective case for blunt body nose configuration for hypersonic flight.

  20. Rhythm production at school entry as a predictor of poor reading and spelling at the end of first grade.

    Science.gov (United States)

    Lundetræ, Kjersti; Thomson, Jenny M

    2018-01-01

    Rhythm plays an organisational role in the prosody and phonology of language, and children with literacy difficulties have been found to demonstrate poor rhythmic perception. This study explored whether students' performance on a simple rhythm task at school entry could serve as a predictor of whether they would face difficulties in word reading and spelling at the end of grade 1. The participants were 479 Norwegian 6-year-old first graders randomized as controls in the longitudinal RCT on track (n = 1171). Rhythmic timing and pre-reading skills were tested individually at school entry on a digital tablet. On the rhythm task, the students were told to tap a drum appearing on the screen to two different rhythms (2 Hz paced and 1.5 Hz paced). Children's responses were recorded as they tapped on the screen with their index finger. Significant group differences were found in rhythm tapping ability measured at school entry, when groups were defined upon whether children went on to score above or below the 20th percentile reading and spelling thresholds in national assessment tests at the end of grade one. Inclusion of the school-entry rhythmic tapping measure into a model of classification accuracy for above or below threshold reading and spelling improved accuracy of classification by 6.2 and 9.2% respectively.

  1. DECOVALEX II PROJECT Technical Report - Task 2C

    International Nuclear Information System (INIS)

    Jing, L.; Stephansson, O.; Chijimatzu, M.; Tsang, C.F.

    1999-05-01

    The DECOVALEX II project is an international co-operative research project supported by a number of national radioactive waste management organizations of different countries. The project studied four tasks: Task 1: numerical simulation of the RCF3 pump test at Sellafield, UK; Task 2: numerical simulation of the in situ T-H-M experiment at Kamaishi Mine, Japan; Task 3: monitoring of current development in rock fracture research; and Task 4: report on treatment of T-H-M processes in Performance Assessment works for nuclear waste repositories. The project started in 1995 and is scheduled to be finalised in March, 1999. This report concerns the Task 2 of the DECOVALEX H project. Task 2 of the DECOVALEX II project is the numerical modelling of the in-situ T-H-M experiment of a fractured rock - buffer - heater system at Kamaishi Mine, Japan. The experiment was carried out inside a test pit drilled in the floor of a 5 x 7 m alcove excavated near an existing drift at the 550 m level. The test pit has a circular cross section of diameter 1.7 m and a depth of 5 m, filled with bentonite which contains an electric heater. Four research teams studied Task 2 with different computational models. The task is divided into three sub-tasks: Task 2A, Task 2B and Task 2C. Task 2A was defined as a blind prediction to the coupled hydro-mechanical behaviour of the fractured rocks due to the excavation of the test pit. The calibration of the numerical models against measured results of pore pressures, flow rates and rock deformation before filling up of the test pit formed Task 2B. These two sub-tasks were performed to establish well calibrated fields of hydraulic conductivity and mechanical deformability of the fractured rocks at the test site. They were necessary for further simulations on interactions between the rock and buffer materials during heating experiments, as required for Task 2C, with a higher level of confidence on rock mass models. Presented in this report is the

  2. DECOVALEX II PROJECT Technical Report - Task 2C

    Energy Technology Data Exchange (ETDEWEB)

    Jing, L.; Stephansson, O. [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Civil and Environmental Engineering; Boergesson, L. [Clay Technology AB, IDEON Research Center, Lund (Sweden); Chijimatzu, M. [Japan Nuclear Cycle Development Inst., Ibaraki (Japan). Waste Management and Fuel Cycle Research Center; Kautsky, F. [Swedish Nuclear Power Inspectorate (SKI), Stockholm (Sweden); Tsang, C.F. [Lawrence Berkeley National Laboratory, Berkeley, CA (United States). Earth Science Div.

    1999-05-01

    The DECOVALEX II project is an international co-operative research project supported by a number of national radioactive waste management organizations of different countries. The project studied four tasks: Task 1: numerical simulation of the RCF3 pump test at Sellafield, UK; Task 2: numerical simulation of the in situ T-H-M experiment at Kamaishi Mine, Japan; Task 3: monitoring of current development in rock fracture research; and Task 4: report on treatment ofT-H-M processes in Performance Assessment works for nuclear waste repositories. The project started in 1995 and is scheduled to be finalised in March, 1999. This report concerns the Task 2 of the DECOVALEX H project. Task 2 of the DECOVALEX II project is the numerical modelling of the in-situ T-H-M experiment of a fractured rock - buffer - heater system at Kamaishi Mine, Japan. The experiment was carried out inside a test pit drilled in the floor of a 5 x 7 m alcove excavated near an existing drift at the 550 m level. The test pit has a circular cross section of diameter 1.7 m and a depth of 5 m, filled with bentonite which contains an electric heater. Four research teams studied Task 2 with different computational models. The task is divided into three sub-tasks: Task 2A, Task 2B and Task 2C. Task 2A was defined as a blind prediction to the coupled hydro-mechanical behaviour of the fractured rocks due to the excavation of the test pit. The calibration of the numerical models against measured results of pore pressures, flow rates and rock deformation before filling up of the test pit formed Task 2B. These two sub-tasks were performed to establish well calibrated fields of hydraulic conductivity and mechanical deformability of the fractured rocks at the test site. They were necessary for further simulations on interactions between the rock and buffer materials during heating experiments, as required for Task 2C, with a higher level of confidence on rock mass models. Presented in this report is the definition

  3. Reducing number entry errors: solving a widespread, serious problem.

    Science.gov (United States)

    Thimbleby, Harold; Cairns, Paul

    2010-10-06

    Number entry is ubiquitous: it is required in many fields including science, healthcare, education, government, mathematics and finance. People entering numbers are to be expected to make errors, but shockingly few systems make any effort to detect, block or otherwise manage errors. Worse, errors may be ignored but processed in arbitrary ways, with unintended results. A standard class of error (defined in the paper) is an 'out by 10 error', which is easily made by miskeying a decimal point or a zero. In safety-critical domains, such as drug delivery, out by 10 errors generally have adverse consequences. Here, we expose the extent of the problem of numeric errors in a very wide range of systems. An analysis of better error management is presented: under reasonable assumptions, we show that the probability of out by 10 errors can be halved by better user interface design. We provide a demonstration user interface to show that the approach is practical.To kill an error is as good a service as, and sometimes even better than, the establishing of a new truth or fact. (Charles Darwin 1879 [2008], p. 229).

  4. Visas for entry and stays in the Host States

    CERN Multimedia

    DG Unit

    2010-01-01

    1. What is a visa? A visa is an administrative document authorising nationals of countries subject to the visa requirement to transit, enter and stay in a foreign country. The numerous types of visa include in particular: a) Short-stay visas (the Schengen C-type visa), which allows their holders to enter and reside in the Schengen Area1) for a continuous or a non-continuous period not exceeding 3 months within any six-month period with effect from initial entry into the Schengen Area; b) Long-stay visas (D-type visa or national visa for the purposes of taking up employment), which are required for stays of over three months, allowing the holder to obtain a legitimation document (titre de séjour) from the Host States: A “carte de légitimation” issued by the Swiss Federal Department of Foreign Affairs; A “titre de séjour spécial” issued by the French Ministry of Foreign and European Affairs. Since 5 April 2010...

  5. Validated Competency Task Lists for General Merchandise Retailing, Food Service Management, and Business and Personal Services Marketing.

    Science.gov (United States)

    Faught, Suzanne G.

    This publication contains competency task lists that address principal entry-level and career-sustaining jobs in the occupational categories of general merchandise retailing, food service management, and business and personal services marketing. Section I, Development of the Competency Task Lists, provides details on how the competencies were…

  6. An automated entry control system for nuclear facilities

    International Nuclear Information System (INIS)

    Ream, W.K.; Espinoza, J.

    1985-01-01

    An entry control system to automatically control access to nuclear facilities is described. The design uses a centrally located console, integrated into the regular security system, to monitor the computer-controlled passage into and out of sensitive areas. Four types of entry control points are used: an unmanned enclosed portal with metal and SNM detectors for contraband detection with positive personnel identification, a bypass portal for contraband search after a contraband alarm in a regular portal also with positive personnel identification, a single door entry point with positive personnel identification, and a single door entry point with only a magnetic card-type identification. Security force action is required only as a response to an alarm. The integration of the entry control function into the security system computer is also described. The interface between the entry control system and the monitoring security personnel utilizing a color graphics display with touch screen input is emphasized

  7. Orthopoxvirus species and strain differences in cell entry

    Energy Technology Data Exchange (ETDEWEB)

    Bengali, Zain; Satheshkumar, P.S. [Laboratory of Viral Diseases, National Institute of Allergy and Infectious Diseases, National Institutes of Health, Bethesda, MD 20892-3210 (United States); Moss, Bernard, E-mail: bmoss@nih.gov [Laboratory of Viral Diseases, National Institute of Allergy and Infectious Diseases, National Institutes of Health, Bethesda, MD 20892-3210 (United States)

    2012-11-25

    Vaccinia virus (VACV) enters cells by a low pH endosomal route or by direct fusion with the plasma membrane. We previously found differences in entry properties of several VACV strains: entry of WR was enhanced by low pH, reduced by bafilomycin A1 and relatively unaffected by heparin, whereas entry of IHD-J, Copenhagen and Elstree were oppositely affected. Since binding and entry modes may have been selected by specific conditions of in vitro propagation, we now examined the properties of three distinct, recently isolated cowpox viruses and a monkeypox virus as well as additional VACV and cowpox virus strains. The recent isolates were more similar to WR than to other VACV strains, underscoring the biological importance of endosomal entry by orthopoxviruses. Sequence comparisons, gene deletions and gene swapping experiments indicated that viral determinants, other than or in addition to the A26 and A25 'fusion-suppressor' proteins, impact entry properties.

  8. Denying Foreign Bank Entry: Implications For Bank Interest Margins

    OpenAIRE

    Ross Levine

    2003-01-01

    This paper examines the impact of restricting foreign bank entry on bank net interest margins while controlling for (a) impediments to domestic bank entry, (b) the degree of foreign bank ownership of the domestic banking industry, (c) an array of bank-specific characteristics, (c) banking sectorconcentration, and (d) various country traits. Using data on almost 1200 banks across 47 countries, the results suggest that restricting foreign bank entry boosts bank net interest margins. Also, restr...

  9. The Internationalization of Chinese Firms: Entry Mode Choice

    OpenAIRE

    Zhang, Xu

    2010-01-01

    Chinese firms and other emerging markets firms aim to select a favourable entry mode to start or expand their international business, thus this is significant issue for research. This study demonstrates that the Chinese firms’ choice of entry mode is determined by internal-factors, external-factors and transaction cost factors. This is illustrated through the investigation of a case study of the Haier Group’s choice of entry mode and internationalization. Therefore, four processes of choice o...

  10. Entry Restrictions, Corruption and Extortion in the Context of Transition

    OpenAIRE

    Inna Cabelkova

    2001-01-01

    This paper argues that even temporary barriers to entry present at the very beginning of transition may lead to permanent extortion development. Entry restrictions, if binding, lead to excess profits, which create an incentive to extort. The emergence of extortionists reduces the expected profit from production, making producers expect extortion in the future. If, after this adaptation of expectations, the government removes the barriers to entry, only a few new firms will enter the market. H...

  11. Supporting complex search tasks

    DEFF Research Database (Denmark)

    Gäde, Maria; Hall, Mark; Huurdeman, Hugo

    2015-01-01

    , is fragmented at best. The workshop addressed the many open research questions: What are the obvious use cases and applications of complex search? What are essential features of work tasks and search tasks to take into account? And how do these evolve over time? With a multitude of information, varying from...

  12. Task leaders reports

    International Nuclear Information System (INIS)

    Loriaux, E.F.; Jehee, J.N.T.

    1995-01-01

    Report on CRP-OSS Task 4.1.1. ''Survey of existing documentation relevant to this programme's goals'' and report on CRP-OSS Task 4.1.2. ''Survey of existing Operator Support Systems and the experience with them'' are presented. 2 tabs

  13. Report on an Investigation into an Entry Level Clinical Doctorate for the Genetic Counseling Profession and a Survey of the Association of Genetic Counseling Program Directors.

    Science.gov (United States)

    Reiser, Catherine; LeRoy, Bonnie; Grubs, Robin; Walton, Carol

    2015-10-01

    The master's degree is the required entry-level degree for the genetic counseling profession in the US and Canada. In 2012 the Association of Genetic Counseling Program Directors (AGCPD) passed resolutions supporting retention of the master's as the entry-level and terminal degree and opposing introduction of an entry-level clinical doctorate (CD) degree. An AGCPD workgroup surveyed directors of all 34 accredited training programs with the objective of providing the Genetic Counseling Advanced Degrees Task Force (GCADTF) with information regarding potential challenges if master's programs were required to transition to an entry-level CD. Program demographics, projected ability to transition to an entry-level CD, factors influencing ability to transition, and potential effects of transition on programs, students and the genetic counseling workforce were characterized. Two programs would definitely be able to transition, four programs would close, thirteen programs would be at risk to close and fourteen programs would probably be able to transition with varying degrees of difficulty. The most frequently cited limiting factors were economic, stress on clinical sites, and administrative approval of a new degree/program. Student enrollment under an entry-level CD model was projected to decrease by 26.2 %, negatively impacting the workforce pipeline. The results further illuminate and justify AGCPD's position to maintain the master's as the entry-level degree.

  14. Free Entry and Social Inefficiency under Co-opetition

    OpenAIRE

    Hattori, Keisuke; Yoshikawa, Takeshi

    2013-01-01

    We investigate the social desirability of free entry in the co-opetition model in which firms compete in a homogeneous product market while sharing common property resources that affect market size or consumers' willingness to pay for products. We show that free entry leads to socially excessive or insufficient entry into the market in the case of non-commitment co-opetition, depending on the magnitude of "business stealing" and "common property" effects of entry. On the other hand, in the ca...

  15. The choice of foreign entry modes in a control perspective

    DEFF Research Database (Denmark)

    Dyhr Ulrich, Anna Marie; Boyd, Britta; Hollensen, Svend

    The aim of this article is to investigate the choice of entry modes for international markets in a control perspective. A survey from The Confederation of Danish Industry with 234 Danish small- and medium sized enterprises served as a data base. The entry modes are categorized into three groups...... depending on the control that the company has over its activities abroad. The paper examines selected factors that influence the ‘entry modes’ of Danish SMEs in different strategic settings. Results show that the most deciding factor for the choice of high control entry mode (subsidiary) was the factor...

  16. Methodological aspects of journaling a dynamic adjusting entry model

    Directory of Open Access Journals (Sweden)

    Vlasta Kašparovská

    2011-01-01

    Full Text Available This paper expands the discussion of the importance and function of adjusting entries for loan receivables. Discussion of the cyclical development of adjusting entries, their negative impact on the business cycle and potential solutions has intensified during the financial crisis. These discussions are still ongoing and continue to be relevant to members of the professional public, banking regulators and representatives of international accounting institutions. The objective of this paper is to evaluate a method of journaling dynamic adjusting entries under current accounting law. It also expresses the authors’ opinions on the potential for consistently implementing basic accounting principles in journaling adjusting entries for loan receivables under a dynamic model.

  17. Regulated portals of entry into the cell

    Science.gov (United States)

    Conner, Sean D.; Schmid, Sandra L.

    2003-03-01

    The plasma membrane is the interface between cells and their harsh environment. Uptake of nutrients and all communication among cells and between cells and their environment occurs through this interface. `Endocytosis' encompasses several diverse mechanisms by which cells internalize macromolecules and particles into transport vesicles derived from the plasma membrane. It controls entry into the cell and has a crucial role in development, the immune response, neurotransmission, intercellular communication, signal transduction, and cellular and organismal homeostasis. As the complexity of molecular interactions governing endocytosis are revealed, it has become increasingly clear that it is tightly coordinated and coupled with overall cell physiology and thus, must be viewed in a broader context than simple vesicular trafficking.

  18. Access, entry and researcher-participant position

    DEFF Research Database (Denmark)

    Louw, Arnt Vestergaard

    2015-01-01

    This article reports on methodological experiences obtained in an anthropologically inspired qualitative study among students of carpentry in Denmark. On the one hand the article deals with methodological issues of doing anthropological research among students of carpentry, while on the other...... it deals with the research findings that such a research design produced. As well as the methodological issues of researcher access, entry and participant position in the field, this article reports on the following questions: What kinds of implicit expectations of the students are embedded in the way...... the school introduces and initiates the programme? What kinds of effects does this have on the motivation of the students? How do the terms and professional language of the profession work on the individual students in including and excluding ways? These specific descriptions of classroom pedagogy, inspired...

  19. Radon entry into a simple test structure

    DEFF Research Database (Denmark)

    Andersen, C.E.; Søgaard-Hansen, J.; Majborn, B.

    1992-01-01

    A simple test structure for studies of radon entry into houses has been constructed at a field site at Riso National Laboratory. It consists of a 40 1, stainless-steel cylinder placed in a 0.52 m deep quadratic excavation with a side length of 2.4 m. The excavation is lined with an airtight...... membrane, and soil gas enters the cylinder through a changeable interface in the bottom. The depressurisation of the cylinder is controlled by a mass-flow controller, thereby limiting the influence of natural driving forces. Pressures, temperatures and radon concentrations are measured continuously...... in the cylinder and in selected locations in the soil. In this paper, the test structure is described, and initial results concerning the transport of soil gas and radon under steady-state conditions are reported. It is found that the soil in the vicinity of the structure is partially depleted with respect...

  20. Multisensory Information Boosts Numerical Matching Abilities in Young Children

    Science.gov (United States)

    Jordan, Kerry E.; Baker, Joseph

    2011-01-01

    This study presents the first evidence that preschool children perform more accurately in a numerical matching task when given multisensory rather than unisensory information about number. Three- to 5-year-old children learned to play a numerical matching game on a touchscreen computer, which asked them to match a sample numerosity with a…

  1. The Mental Representation of Numerical Fractions: Real or Integer?

    Science.gov (United States)

    Bonato, Mario; Fabbri, Sara; Umilta, Carlo; Zorzi, Marco

    2007-01-01

    Numerical fractions are commonly used to express ratios and proportions (i.e., real numbers), but little is known about how they are mentally represented and processed by skilled adults. Four experiments employed comparison tasks to investigate the distance effect and the effect of the spatial numerical association of response codes (SNARC) for…

  2. Passive Earth Entry Vehicle Landing Test

    Science.gov (United States)

    Kellas, Sotiris

    2017-01-01

    Two full-scale passive Earth Entry Vehicles (EEV) with realistic structure, surrogate sample container, and surrogate Thermal Protection System (TPS) were built at NASA Langley Research Center (LaRC) and tested at the Utah Test and Training Range (UTTR). The main test objective was to demonstrate structural integrity and investigate possible impact response deviations of the realistic vehicle as compared to rigid penetrometer responses. With the exception of the surrogate TPS and minor structural differences in the back shell construction, the two test vehicles were identical in geometry and both utilized the Integrated Composite Stiffener Structure (ICoSS) structural concept in the forward shell. The ICoSS concept is a lightweight and highly adaptable composite concept developed at NASA LaRC specifically for entry vehicle TPS carrier structures. The instrumented test vehicles were released from a helicopter approximately 400 m above ground. The drop height was selected such that at least 98% of the vehicles terminal velocity would be achieved. While drop tests of spherical penetrometers and a low fidelity aerodynamic EEV model were conducted at UTTR in 1998 and 2000, this was the first time a passive EEV with flight-like structure, surrogate TPS, and sample container was tested at UTTR for the purpose of complete structural system validation. Test results showed that at a landing vertical speed of approximately 30 m/s, the test vehicle maintained structural integrity and enough rigidity to penetrate the sandy clay surface thus attenuating the landing load, as measured at the vehicle CG, to less than 600 g. This measured deceleration was found to be in family with rigid penetrometer test data from the 1998 and 2000 test campaigns. Design implications of vehicle structure/soil interaction with respect to sample container and sample survivability are briefly discussed.

  3. Two Bistable Switches Govern M Phase Entry.

    Science.gov (United States)

    Mochida, Satoru; Rata, Scott; Hino, Hirotsugu; Nagai, Takeharu; Novák, Béla

    2016-12-19

    The abrupt and irreversible transition from interphase to M phase is essential to separate DNA replication from chromosome segregation. This transition requires the switch-like phosphorylation of hundreds of proteins by the cyclin-dependent kinase 1 (Cdk1):cyclin B (CycB) complex. Previous studies have ascribed these switch-like phosphorylations to the auto-activation of Cdk1:CycB through the removal of inhibitory phosphorylations on Cdk1-Tyr15 [1, 2]. The positive feedback in Cdk1 activation creates a bistable switch that makes mitotic commitment irreversible [2-4]. Here, we surprisingly find that Cdk1 auto-activation is dispensable for irreversible, switch-like mitotic entry due to a second mechanism, whereby Cdk1:CycB inhibits its counteracting phosphatase (PP2A:B55). We show that the PP2A:B55-inhibiting Greatwall (Gwl)-endosulfine (ENSA) pathway is both necessary and sufficient for switch-like phosphorylations of mitotic substrates. Using purified components of the Gwl-ENSA pathway in a reconstituted system, we found a sharp Cdk1 threshold for phosphorylation of a luminescent mitotic substrate. The Cdk1 threshold to induce mitotic phosphorylation is distinctly higher than the Cdk1 threshold required to maintain these phosphorylations-evidence for bistability. A combination of mathematical modeling and biochemical reconstitution show that the bistable behavior of the Gwl-ENSA pathway emerges from its mutual antagonism with PP2A:B55. Our results demonstrate that two interlinked bistable mechanisms provide a robust solution for irreversible and switch-like mitotic entry. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. CHARACTERISTICS OF MANAGED ENTRY AGREEMENTS IN AUSTRALIA.

    Science.gov (United States)

    Robinson, Maxine F; Mihalopoulos, Cathrine; Merlin, Tracy; Roughead, Elizabeth

    2018-01-01

    Australia relies on managed entry agreements (MEAs) for many medicines added to the national Pharmaceutical Benefits Scheme (PBS). Previous studies of Australian MEAs examined public domain documents and were not able to provide a comprehensive assessment of the types and operation of MEAs. This study used government documents approved for release to examine the implementation and administration of MEAs implemented January 2012 to May 2016. We accessed documents for medicines with MEAs on the PBS between January 2012 and May 2016. Data were extracted on Anatomical Therapeutic Classification (ATC), type of MEA (financial, financial with outcomes, outcomes, and subcategories within each group), implementation and administration methods, source of MEA recommendation, and type of economic analysis. Of all medication indication pairs (MIPs) recommended for listing, one-third had MEAs implemented. Our study of eighty-seven MIPs had 170 MEAs in place. The Government's expert health technology assessment (HTA) committee recommended MEAs for 90 percent of the eighty-seven MIPs. A total of 81 percent of MEAs were simple financial agreements: the majority either discounts (32 percent) or reimbursement caps (43 percent). Outcome-based MEAs were least common (5 percent). Ninety-two percent of MEAs were implemented and operated through legal agreements. Approximately half of the MIPs were listed on the basis of accepted claims of cost-minimization. Forty-nine percent of medicines were in ATC L group. Advice from HTA evaluations strongly influences the implementation of ways to manage uncertainties while providing access to medicines. The government relied primarily on simple financial agreements for the managed entry of medicines for which there were perceived risks.

  5. The influence of initial conditions of water-entry on ricochet phenomenon

    Energy Technology Data Exchange (ETDEWEB)

    Guoming, Chen; Jinfu, Feng; Junhua, Hu; An, Liu [Aeronautics and Astronautics Engineering College, Air Force Engineering University, Xi’an, 710038 (China); Yongli, Li, E-mail: 18192081790@163.com [Engineering University of CAPF, Xi’an 710086 (China)

    2017-08-15

    The ricochet phenomenon of the water-entry of the water–air crossing vehicle is investigated by both experiments and numerical simulations. Experiments and numerical simulations of the water-entry process with different inclination angles, velocities, and attack angles are performed. The whole ricochet progress and the changing rules of angular acceleration, angular velocity, and displacement are obtained and analyzed by numerical simulation for a deeper understanding of ricochet phenomenon. The experiment is carried out to study the underwater trajectory by changing the initial condition only. The experimental results are in good agreement with the simulations. The results show that: (1) A small inclination angle causes the trajectory to bend upward, favoring the ricochet phenomenon. (2) A large velocity value also favors the ricochet phenomenon, making it occur more easily and quickly, but lower velocities are insufficient to provide the necessary kinetic energy. (3) The ricochet phenomenon is more likely to occur under a negative attack angle that causes the trajectory to bend upward, but a positive angle balances the underwater trajectory. These results can provide guidance to design a new water–air cross vehicle. (paper)

  6. Numerical methods using Matlab

    CERN Document Server

    Lindfield, George

    2012-01-01

    Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board. Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of use

  7. The entry-level physical therapist: a case for COMFORT communication training.

    Science.gov (United States)

    Goldsmith, Joy; Wittenberg-Lyles, Elaine; Frisby, Brandi N; Platt, Christine Small

    2015-01-01

    Entry-level physical therapists provide clinical care for patients with functional mobility limitations. Their care spans the continuum of settings, disease processes, and diagnoses. Although effective communication skills are required to conduct physical therapy work, there is limited instruction provided in physical therapy education and students receive little exposure to seriously or chronically ill patients. The goal of this study was to assess the effects of communication training for the entry-level physical therapist facing palliative and end-of-life communication with patients/families. A pre-post survey design and narrative writing were used to assess the effect of the COMFORT communication training curriculum provided to doctorally trained, graduating physical therapists. The study demonstrated decreased student apprehension about communicating with dying patients and their families, and a comparison of mean scores reflecting the students' communication knowledge, confidence, and behaviors increased in a positive direction. As students became more willing to communicate, they were also more adept at integrating task and relational messages, as well as assimilating emotional support messages for patients and families. This study shows promise for the feasibility and utilization of the COMFORT curriculum for entry-level physical therapists. Further research should address the integration of COMFORT earlier into physical therapy education, as well as assess evidence of COMFORT communication skills in the clinical context.

  8. An Examination of Market Entry Perspectives in Emerging Markets

    Directory of Open Access Journals (Sweden)

    Marvin O. Bates

    2017-11-01

    Full Text Available Purpose – The purpose of this article is to describe the marketing-oriented market entry approaches that businesses are currently using across the three levels of the world economic pyramid (i.e., WEP. These levels are the Top-tier, the Middle-tier, and the Base of the Pyramid-tier (i.e., BoP-tier. Methodology – The literature of the BoP was reviewed, and market entry approaches were itemized across the three WEP levels. Secondly, BoP strategic theorists including Prahalad identified the need for a BoP marketing focus replacing the traditional 4Ps marketing approach (i.e., Product, Price, Place and Promotion with the BoP-specific 4As marketing approach (i.e., Awareness, Affordability, Access and Availability. This 4As marketing approach is discussed. Findings – New marketing-oriented market-entry approaches are proposed for each of the three WEP levels. These approaches are based on where in the WEP the firm currently exists, and where in the WEP the firm desires to refocus market-entry activities; identified approaches include: inter-country expansion, intra-country entry, adjacent market entry, and extended market entry. Secondly, the absence of a clearly articulated marketing strategy for middle-tier markets was observed. Practical implications – This article has two specific applications. First, it summarizes the evolving market entry perspectives to provide a context for future market research in both emerging markets and the pre-emerging BoP markets. Second, the future requirement for an articulated marketing strategy for middle-tier markets is suggested. Originality – This article examined existing market entry approaches across all three levels of the WEP, inclusive of the BoP economic level. The language used to clarify market entry movements was extended, providing a specificity of description not previously found in either the existing market entry or BoP literature.

  9. Numerical challenges of short range wake field calculations

    Energy Technology Data Exchange (ETDEWEB)

    Lau, Thomas; Gjonaj, Erion; Weiland, Thomas [Technische Universitaet Darmstadt (Germany). Institut fuer Theorie Elektromagnetischer Felder (TEMF)

    2011-07-01

    For present and future accelerator projects with ultra short bunches the accurate and reliable calculation of short range wake fields is an important issue. However, the numerical calculation of short range wake fields is a numerical challenging task. The presentation gives an overview over the numerical challenges and techniques for short range wake field calculations. Finally, some simulation results obtained by the program PBCI developed at the TU Darmstadt are presented.

  10. THE BANDWAGON EFFECT OF LEADERS' ENTRY STRATEGIES ON FOLLOWERS' ENTRY STRATEGIES

    OpenAIRE

    Kaplan, Tugba

    2017-01-01

    Firms, whichhave to compete with global firms in domestic market, try to internationalizefor gaining competitive advantage. The aim of this study is to recommend a conceptual framework to explain thedynamics of internationalization process of leader and follower firms thatinternationalize from an emerging country. In this study, author tries tofigure out the determinants of entrymode decisions of follower firms. In addition, bandwagon effect of leaders'entry mode strategies on followers&...

  11. Generic cognitive adaptations to task interference in task switching

    NARCIS (Netherlands)

    Poljac, E.; Bekkering, H.

    2009-01-01

    The present study investigated how the activation of previous tasks interferes with the execution of future tasks as a result of temporal manipulations. Color and shape matching tasks were organized in runs of two trials each. The tasks were specified by a cue presented before a task run, cueing

  12. Energy Efficient Task Light

    DEFF Research Database (Denmark)

    Logadottir, Asta; Ardkapan, Siamak Rahimi; Johnsen, Kjeld

    2014-01-01

    The objectives of this work is to develop a task light for office lighting that fulfils the minimum requirements of the European standard EN12464 - 1 : Light and lighting – Lighting of work places, Part 1: Indoor workplaces and the Danish standard DS 700 : Lys og belysning I arbejdsrum , or more...... specifically the requirements that apply to the work area and the immediate surrounding area. By providing a task light that fulfils the requirements for task lighting and the immediate surrounding area, the general lighting only needs to provide the illuminance levels required for background lighting...... and thereby a reduction in installed power for general lighting of about 40 % compared to the way illuminance levels are designed in an office environment in Denmark today. This lighting strategy is useful when the placement of the task area is not defined in the space before the lighting is design ed...

  13. 18 CFR 33.5 - Proposed accounting entries.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Proposed accounting... § 33.5 Proposed accounting entries. If the applicant is required to maintain its books of account in... present proposed accounting entries showing the effect of the transaction with sufficient detail to...

  14. 36 CFR 228.54 - Single entry sales or permits.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Single entry sales or permits... MINERALS Disposal of Mineral Materials General Provisions § 228.54 Single entry sales or permits. The... plan which describes operating procedures and reclamation measures, unless the requirement is waived by...

  15. 9 CFR 93.220 - Inspection at port of entry.

    Science.gov (United States)

    2010-01-01

    ... CERTAIN ANIMALS, BIRDS, FISH, AND POULTRY, AND CERTAIN ANIMAL, BIRD, AND POULTRY PRODUCTS; REQUIREMENTS FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Poultry Mexico 8 § 93.220 Inspection at port of entry. (a) All poultry offered for entry from Mexico, including such poultry intended for movement through...

  16. 9 CFR 93.426 - Inspection at port of entry.

    Science.gov (United States)

    2010-01-01

    ... CERTAIN ANIMALS, BIRDS, FISH, AND POULTRY, AND CERTAIN ANIMAL, BIRD, AND POULTRY PRODUCTS; REQUIREMENTS FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Ruminants Mexico 10 § 93.426 Inspection at port of entry. (a) All ruminants offered for entry from Mexico, including such ruminants intended for movement...

  17. Foreign Bank Entry and Credit Allocation in Emerging Markets

    NARCIS (Netherlands)

    Degryse, H.A.; Havrylchyk, O.; Jurzyk, E.; Kozak, S.

    2009-01-01

    We employ a unique data set containing bank-specific information to explore how foreign bank entry determines credit allocation in emerging markets. We investigate the impact of the mode of foreign entry (greenfield or takeover) on banks’ portfolio allocation to borrowers with different degrees of

  18. 19 CFR 12.99 - Procedures for permitted entry.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Procedures for permitted entry. 12.99 Section 12.99 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Switchblade Knives § 12.99 Procedures for permitted entry...

  19. Welfare Effects of Entry into International Markets with Licensing

    Science.gov (United States)

    Ferreira, F. A.; Ferreira, Fl.

    2008-10-01

    We study the effects of entry of a foreign firm on domestic welfare in the presence of licensing, when the entrant is technologically inferior to the incumbent. We show that foreign entry increases domestic welfare for intermediate (respectively, sufficiently large) technological differences between the firms under licensing with fixed fee (respectively, output royalty).

  20. 27 CFR 478.23 - Right of entry and examination.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Right of entry and... Administrative and Miscellaneous Provisions § 478.23 Right of entry and examination. (a) Except as provided in... of a criminal investigation of a person or persons other than the licensee, (2) For insuring...

  1. 19 CFR 146.63 - Entry for consumption.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Entry for consumption. 146.63 Section 146.63... TREASURY (CONTINUED) FOREIGN TRADE ZONES Transfer of Merchandise From a Zone § 146.63 Entry for consumption... status may be entered for consumption from a zone. (b) Zone-restricted merchandise. Merchandise in a zone...

  2. The Importance of Prior Probabilities for Entry Page Search

    NARCIS (Netherlands)

    Kraaij, W.; Westerveld, T.H.W.; Hiemstra, Djoerd

    An important class of searches on the world-wide-web has the goal to find an entry page (homepage) of an organisation. Entry page search is quite different from Ad Hoc search. Indeed a plain Ad Hoc system performs disappointingly. We explored three non-content features of web pages: page length,

  3. 46 CFR Sec. 2 - Submission of repair entries.

    Science.gov (United States)

    2010-10-01

    ... MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION A-NATIONAL SHIPPING AUTHORITY GENERAL AGENT'S RESPONSIBILITY IN CONNECTION WITH FOREIGN REPAIR CUSTOM'S ENTRIES Sec. 2 Submission of repair entries. At the... with the District Director of Customs as defined in 19 CFR 1.1(d) an affidavit on Custom's Form 3417...

  4. Task-Driven Comparison of Topic Models.

    Science.gov (United States)

    Alexander, Eric; Gleicher, Michael

    2016-01-01

    Topic modeling, a method of statistically extracting thematic content from a large collection of texts, is used for a wide variety of tasks within text analysis. Though there are a growing number of tools and techniques for exploring single models, comparisons between models are generally reduced to a small set of numerical metrics. These metrics may or may not reflect a model's performance on the analyst's intended task, and can therefore be insufficient to diagnose what causes differences between models. In this paper, we explore task-centric topic model comparison, considering how we can both provide detail for a more nuanced understanding of differences and address the wealth of tasks for which topic models are used. We derive comparison tasks from single-model uses of topic models, which predominantly fall into the categories of understanding topics, understanding similarity, and understanding change. Finally, we provide several visualization techniques that facilitate these tasks, including buddy plots, which combine color and position encodings to allow analysts to readily view changes in document similarity.

  5. Changes in Cerebral Hemodynamics during Complex Motor Learning by Character Entry into Touch-Screen Terminals.

    Directory of Open Access Journals (Sweden)

    Akira Sagari

    Full Text Available Studies of cerebral hemodynamics during motor learning have mostly focused on neurorehabilitation interventions and their effectiveness. However, only a few imaging studies of motor learning and the underlying complex cognitive processes have been performed.We measured cerebral hemodynamics using near-infrared spectroscopy (NIRS in relation to acquisition patterns of motor skills in healthy subjects using character entry into a touch-screen terminal. Twenty healthy, right-handed subjects who had no previous experience with character entry using a touch-screen terminal participated in this study. They were asked to enter the characters of a randomly formed Japanese syllabary into the touch-screen terminal. All subjects performed the task with their right thumb for 15 s alternating with 25 s of rest for 30 repetitions. Performance was calculated by subtracting the number of incorrect answers from the number of correct answers, and gains in motor skills were evaluated according to the changes in performance across cycles. Behavioral and oxygenated hemoglobin concentration changes across task cycles were analyzed using Spearman's rank correlations.Performance correlated positively with task cycle, thus confirming motor learning. Hemodynamic activation over the left sensorimotor cortex (SMC showed a positive correlation with task cycle, whereas activations over the right prefrontal cortex (PFC and supplementary motor area (SMA showed negative correlations.We suggest that increases in finger momentum with motor learning are reflected in the activity of the left SMC. We further speculate that the right PFC and SMA were activated during the early phases of motor learning, and that this activity was attenuated with learning progress.

  6. Numerical Methods in Linguistics

    Indian Academy of Sciences (India)

    guages, and finding relationships by determining the per- centages of .... Hence, inferring language relationships is quite a task. However, some .... Conflicts arise when these speakers of now different languages come into contact again and ...

  7. Entry-to-practice public health nursing competencies: A Delphi method and knowledge translation strategy.

    Science.gov (United States)

    Schofield, Ruth; Chircop, Andrea; Baker, Cynthia; Dietrich Leurer, Marie; Duncan, Susan; Wotton, Donalda

    2018-06-01

    Sustaining and strengthening nurses 'contributions to public and population health in the 21st century depends in part on nursing education. Clearly articulated entry-to-practice competencies will contribute to the capacity of undergraduate nursing education programs to prepare graduates to promote local, national and global population health. The Canadian Association of Schools of Nursing created the Public Health Task Force to develop consensus on core, national entry-to-practice competencies in public health nursing for undergraduate nursing students and to support these competencies with corresponding online teaching strategies. Delphi approach. Nurses with public health experience in education and practice, and representatives from other public health professional organizations across Canada. The three-phased competency development included: 1) an environmental scan; 2) an iterative process to draft competencies; and 3) a modified Delphi process to confirm the final competency framework using face to face consultations and a survey. The knowledge translation strategy involved soliciting submissions of teaching strategies for peer-review and subsequent inclusion in an interactive online resource. 242 public health educators and practitioners participated in the consensus consultation. The final document outlined five competency statements with 19 accompanying indicators. A total of 123 teaching strategies were submitted for the online resource, of which 50 were accepted as exemplary teaching strategies. This competency development process can provide guidance for the development of competencies in other countries, thus strengthening public health nursing education globally. The decision to intentionally level the competencies to entry-to-practice, as opposed to an advanced level, enhanced their application to undergraduate nursing education. The development of the additional inventory of teaching strategies created a sustainable innovative resource for public

  8. An entry and exit model on the energy-saving investment strategy with real options

    International Nuclear Information System (INIS)

    Lin, Tyrone T.; Huang, S.-L.

    2010-01-01

    This paper presents an improved decision model based on the real options approach presented by for the firms that have not yet established energy-saving equipment under the entry and exit strategies. Furthermore, the proposed model takes account of the inevitable equipment renewal and the occurrence of unexpected events under the Poisson jump process. The timing for terminating an investment when continuous operations of that business are unprofitable is also explored to realize the optimal timing of implementing the energy-saving strategy. The future discounted benefit B follows the geometric Brownian motion with the Poisson jump process and the replacement of investment equipment. A numerical analysis is followed by a sensitivity study of various parameters to better realize their impacts on the entry and exit thresholds. The results show that for the jump case, the higher probability of occurrence of unfavorable events will result in a higher entry threshold and lower exit threshold. Investors are forced to request higher benefit thresholds to cover the higher probability of losses brought by unfavorable events.

  9. Atmosphere Assessment for MARS Science Laboratory Entry, Descent and Landing Operations

    Science.gov (United States)

    Cianciolo, Alicia D.; Cantor, Bruce; Barnes, Jeff; Tyler, Daniel, Jr.; Rafkin, Scot; Chen, Allen; Kass, David; Mischna, Michael; Vasavada, Ashwin R.

    2013-01-01

    On August 6, 2012, the Mars Science Laboratory rover, Curiosity, successfully landed on the surface of Mars. The Entry, Descent and Landing (EDL) sequence was designed using atmospheric conditions estimated from mesoscale numerical models. The models, developed by two independent organizations (Oregon State University and the Southwest Research Institute), were validated against observations at Mars from three prior years. In the weeks and days before entry, the MSL "Council of Atmospheres" (CoA), a group of atmospheric scientists and modelers, instrument experts and EDL simulation engineers, evaluated the latest Mars data from orbiting assets including the Mars Reconnaissance Orbiter's Mars Color Imager (MARCI) and Mars Climate Sounder (MCS), as well as Mars Odyssey's Thermal Emission Imaging System (THEMIS). The observations were compared to the mesoscale models developed for EDL performance simulation to determine if a spacecraft parameter update was necessary prior to entry. This paper summarizes the daily atmosphere observations and comparison to the performance simulation atmosphere models. Options to modify the atmosphere model in the simulation to compensate for atmosphere effects are also presented. Finally, a summary of the CoA decisions and recommendations to the MSL project in the days leading up to EDL is provided.

  10. Numerical simulation of radial compressor stage

    Science.gov (United States)

    Syka, T.; Luňáček, O.

    2013-04-01

    Article describes numerical simulations of air flow in radial compressor stage in NUMECA CFD software. In simulations geometry variants with and without seals are used. During tasks evaluating was observed seals influence on flow field and performance parameters of compressor stage. Also is described CFDresults comparison with results from design software based on experimental measurements and monitoring of influence of seals construction on compressor stage efficiency.

  11. Numerical simulation of radial compressor stage

    OpenAIRE

    Luňáček O.; Syka T.

    2013-01-01

    Article describes numerical simulations of air flow in radial compressor stage in NUMECA CFD software. In simulations geometry variants with and without seals are used. During tasks evaluating was observed seals influence on flow field and performance parameters of compressor stage. Also is described CFDresults comparison with results from design software based on experimental measurements and monitoring of influence of seals construction on compressor stage efficiency.

  12. Numerical simulation of radial compressor stage

    Directory of Open Access Journals (Sweden)

    Luňáček O.

    2013-04-01

    Full Text Available Article describes numerical simulations of air flow in radial compressor stage in NUMECA CFD software. In simulations geometry variants with and without seals are used. During tasks evaluating was observed seals influence on flow field and performance parameters of compressor stage. Also is described CFDresults comparison with results from design software based on experimental measurements and monitoring of influence of seals construction on compressor stage efficiency.

  13. The entry of free radicals into polystyrene latex particles

    International Nuclear Information System (INIS)

    Adams, M.E.; Trau, M.; Gilbert, R.C.; Napper, D.R.

    1988-01-01

    Mechanistic understanding of the processes governing the kinetics of emulsion polymerization has both scientific and technical interest. One component of this process that is poorly understood at present is that of free radical entry into latex particles. Measurements were made of the entry rate coefficient as a function of temperature for free radicals entering polystyrene latex particles in seeded emulsion polymerizations initiated by γ-rays. The activation energy for entry was found to be less than 24 ± 3 kJ mol -1 , consistent with entry being controlled by a physical (e.g. diffusional) rather than a chemical process. Measurement of the entry rate coefficient as a function of the γ-ray dose rate suggested that the factors that determine the entry rate when the primary free radicals are uncharged are similar to those that determine the entry rate for charged free radicals derived from chemical initiation by peroxydisulfate. This result was consistent with measurements of the entry rate coefficient of charged free radicals derived from peroxydisulfate; these data were found to be virtually independent of both the extent of the latex surface coverage by the anionic surfactant sodium dodecyl sulfate and the ionic strength of the continuous phase. The data refute several proposals given in the literature for the rate-determining step for entry, being inconsistent with control by collision of free radicals with the latex particles, surfactant desorption, and an electrostatic barrier arising from the colloidal nature of the entering free radical. The origin of the activation energy for entry remains obscure

  14. Contaminated sediment research task: SHC Task 3.61.3

    Science.gov (United States)

    A poster presentation for the SHC BOSC review will summarize the research efforts under Sustainable and Healthy Communities Research Program (SHC) in the Contaminated Sediment Task within the Contaminated Sites Project. For the Task, Problem Summary & Decision Context; Task O...

  15. A numerical library in Java for scientists and engineers

    CERN Document Server

    Lau, Hang T

    2003-01-01

    At last researchers have an inexpensive library of Java-based numeric procedures for use in scientific computation. The first and only book of its kind, A Numeric Library in Java for Scientists and Engineers is a translation into Java of the library NUMAL (NUMerical procedures in ALgol 60). This groundbreaking text presents procedural descriptions for linear algebra, ordinary and partial differential equations, optimization, parameter estimation, mathematical physics, and other tools that are indispensable to any dynamic research group. The book offers test programs that allow researchers to execute the examples provided; users are free to construct their own tests and apply the numeric procedures to them in order to observe a successful computation or simulate failure. The entry for each procedure is logically presented, with name, usage parameters, and Java code included. This handbook serves as a powerful research tool, enabling the performance of critical computations in Java. It stands as a cost-effi...

  16. Comparison of single-entry and double-entry two-step couple screening for cystic fibrosis carriers

    NARCIS (Netherlands)

    tenKate, LP; Verheij, JBGM; Wildhagen, MF; Hilderink, HBM; Kooij, L; Verzijl, JG; Habbema, JDF

    1996-01-01

    Both single-entry two-step (SETS) couple screening and double-entry two-step (DETS) couple screening have been recommended as methods to screen for cystic fibrosis gene carriers. In this paper we compare the expected results from both types of screening. In general, DETS results in a higher

  17. Swiss Army Pathogen: The Salmonella Entry Toolkit

    Directory of Open Access Journals (Sweden)

    Peter J. Hume

    2017-08-01

    Full Text Available Salmonella causes disease in humans and animals ranging from mild self-limiting gastroenteritis to potentially life-threatening typhoid fever. Salmonellosis remains a considerable cause of morbidity and mortality globally, and hence imposes a huge socio-economic burden worldwide. A key property of all pathogenic Salmonella strains is the ability to invade non-phagocytic host cells. The major determinant of this invasiveness is a Type 3 Secretion System (T3SS, a molecular syringe that injects virulence effector proteins directly into target host cells. These effectors cooperatively manipulate multiple host cell signaling pathways to drive pathogen internalization. Salmonella does not only rely on these injected effectors, but also uses several other T3SS-independent mechanisms to gain entry into host cells. This review summarizes our current understanding of the methods used by Salmonella for cell invasion, with a focus on the host signaling networks that must be coordinately exploited for the pathogen to achieve its goal.

  18. HTCC: Broad Range Inhibitor of Coronavirus Entry.

    Directory of Open Access Journals (Sweden)

    Aleksandra Milewska

    Full Text Available To date, six human coronaviruses have been known, all of which are associated with respiratory infections in humans. With the exception of the highly pathogenic SARS and MERS coronaviruses, human coronaviruses (HCoV-NL63, HCoV-OC43, HCoV-229E, and HCoV-HKU1 circulate worldwide and typically cause the common cold. In most cases, infection with these viruses does not lead to severe disease, although acute infections in infants, the elderly, and immunocompromised patients may progress to severe disease requiring hospitalization. Importantly, no drugs against human coronaviruses exist, and only supportive therapy is available. Previously, we proposed the cationically modified chitosan, N-(2-hydroxypropyl-3-trimethylammonium chitosan chloride (HTCC, and its hydrophobically-modified derivative (HM-HTCC as potent inhibitors of the coronavirus HCoV-NL63. Here, we show that HTCC inhibits interaction of a virus with its receptor and thus blocks the entry. Further, we demonstrate that HTCC polymers with different degrees of substitution act as effective inhibitors of all low-pathogenic human coronaviruses.

  19. Intracellular Route of Canine Parvovirus Entry

    Science.gov (United States)

    Vihinen-Ranta, Maija; Kalela, Anne; Mäkinen, Päivi; Kakkola, Laura; Marjomäki, Varpu; Vuento, Matti

    1998-01-01

    The present study was designed to investigate the endocytic pathway involved in canine parvovirus (CPV) infection. Reduced temperature (18°C) or the microtubule-depolymerizing drug nocodazole was found to inhibit productive infection of canine A72 cells by CPV and caused CPV to be retained in cytoplasmic vesicles as indicated by immunofluorescence microscopy. Consistent with previously published results, these data indicate that CPV enters a host cell via an endocytic route and further suggest that microtubule-dependent delivery of CPV to late endosomes is required for productive infection. Cytoplasmic microinjection of CPV particles was used to circumvent the endocytosis and membrane fusion steps in the entry process. Microinjection experiments showed that CPV particles which were injected directly into the cytoplasm, thus avoiding the endocytic pathway, were unable to initiate progeny virus production. CPV treated at pH 5.0 prior to microinjection was unable to initiate virus production, showing that factors of the endocytic route other than low pH are necessary for the initiation of infection by CPV. PMID:9420290

  20. Numerical distance protection

    CERN Document Server

    Ziegler, Gerhard

    2011-01-01

    Distance protection provides the basis for network protection in transmission systems and meshed distribution systems. This book covers the fundamentals of distance protection and the special features of numerical technology. The emphasis is placed on the application of numerical distance relays in distribution and transmission systems.This book is aimed at students and engineers who wish to familiarise themselves with the subject of power system protection, as well as the experienced user, entering the area of numerical distance protection. Furthermore it serves as a reference guide for s

  1. Numerical problems in physics

    CERN Document Server

    Singh, Devraj

    2015-01-01

    Numerical Problems in Physics, Volume 1 is intended to serve the need of the students pursuing graduate and post graduate courses in universities with Physics and Materials Science as subject including those appearing in engineering, medical, and civil services entrance examinations. KEY FEATURES: * 29 chapters on Optics, Wave & Oscillations, Electromagnetic Field Theory, Solid State Physics & Modern Physics * 540 solved numerical problems of various universities and ompetitive examinations * 523 multiple choice questions for quick and clear understanding of subject matter * 567 unsolved numerical problems for grasping concepts of the various topic in Physics * 49 Figures for understanding problems and concept

  2. Entry limitations and heterogeneous tolerances in a Schelling-like segregation model

    International Nuclear Information System (INIS)

    Radi, Davide; Gardini, Laura

    2015-01-01

    In this paper we consider a Schelling-type segregation model with two groups of agents that differ in some aspects, such as religion, political affiliation or color of skin. The first group is identified as the local population, while the second group is identified as the newcomers, whose members want to settle down in the city or country, or more generally a system, already populated by members of the local population. The members of the local population have a limited tolerance towards newcomers. On the contrary, some newcomers, but not all of them, may stand the presence of any amount of members of the local population. The heterogeneous, and partially limited, levels of tolerance trigger an entry and exit dynamics into and from the system of the members of the two groups based on their satisfaction with the number of members of the other group into the system. This entry/exit dynamics is described by a continuous piecewise-differentiable map in two dimensions. The dynamics of the model is characterized by smooth bifurcations as well as by border collision bifurcations. A combination of analytical results and numerical analysis are the main tools used to describe the quite complicated local and global dynamics of the model. The investigation reveals that two factors are the main elements that preclude integration. The first one is a low level of tolerance of the members of the two populations. The second one is an excessive and unbalanced level of tolerance between the two populations. In this last case, to facilitate the integration between members of the two groups, we impose an entry-limitation policy represented by the imposition of a maximum number of newcomers allowed to enter the system. The investigation of the dynamics reveals that the entry-limitation policy is useful to promote integration as it limits the negative effects due to excessive and unbalanced levels of tolerance.

  3. Aerodynamic Interactions of Propulsive Deceleration and Reaction Control System Jets on Mars-Entry Aeroshells

    Science.gov (United States)

    Alkandry, Hicham

    Future missions to Mars, including sample-return and human-exploration missions, may require alternative entry, descent, and landing technologies in order to perform pinpoint landing of heavy vehicles. Two such alternatives are propulsive deceleration (PD) and reaction control systems (RCS). PD can slow the vehicle during Mars atmospheric descent by directing thrusters into the incoming freestream. RCS can provide vehicle control and steering by inducing moments using thrusters on the hack of the entry capsule. The use of these PD and RCS jets, however, involves complex flow interactions that are still not well understood. The fluid interactions induced by PD and RCS jets for Mars-entry vehicles in hypersonic freestream conditions are investigated using computational fluid dynamics (CFD). The effects of central and peripheral PD configurations using both sonic and supersonic jets at various thrust conditions are examined in this dissertation. The RCS jet is directed either parallel or transverse to the freestream flow at different thrust conditions in order to examine the effects of the thruster orientation with respect to the center of gravity of the aeroshell. The physical accuracy of the computational method is also assessed by comparing the numerical results with available experimental data. The central PD configuration decreases the drag force acting on the entry capsule due to a shielding effect that prevents mass and momentum in the hypersonic freestream from reaching the aeroshell. The peripheral PD configuration also decreases the drag force by obstructing the flow around the aeroshell and creating low surface pressure regions downstream of the PD nozzles. The Mach number of the PD jets, however, does not have a significant effect on the induced fluid interactions. The reaction control system also alters the flowfield, surface, and aerodynamic properties of the aeroshell, while the jet orientation can have a significant effect on the control effectiveness

  4. Determination of entry site for acute type A aortic dissection by initial enhanced CT-scan

    International Nuclear Information System (INIS)

    Mase, Takenori; Narumiya, Chihiro; Aoyama, Takahiko; Nagata, Yoshihisa

    2002-01-01

    Acute type A aortic dissection presents a surgical emergency because conservative therapy is not effective in the majority of instances. Enhanced CT-scan of the chest is commonly available and is considered to be an optimal diagnostic method for this disease. The operative strategy is to resect the primary tear to close the entry site of the aortic dissection and replace it with a tubular Dacron graft. Therefore, the existence of the entry site is important in determining the operative procedure. Based on the numerical value of the enhanced CT-scan inspection, the present study seeks to preoperatively identify the location of the presumed entry site in aortic dissection. From May 1996 to June 1999, 21 consecutive patients (Marfan's syndrome excluded) with acute type A aortic dissection underwent surgical treatment. Nineteen patients were preoperatively examined by enhanced CT-scan: 11 men and 8 women, with a mean age of 61 years. CT-scan slices used for early diagnosis were of the ascending aorta, aortic arch, descending aorta, and thoracoabdominal aorta. The largest diameters of the whole and true lumen were measured from cross-sectional aortic images with a personal computer, and the areas of the whole and true lumen were obtained by the manual tracing method. The true ratio was calculated for the largest diameter and area of the whole lumen. The nineteen patients were divided into two groups according to the location of the entry site based on the operating views. Seven patients with the entry site in the ascending aorta were classified as group A, and twelve patients with the entry site further in the aortic arch and descending aorta were classified as group B. Comparisons were performed by non-parametric analysis. Moreover, a discriminant analysis was applied to evaluate the classification between the two groups. The ratio of the largest diameter of the true lumen in group A at the level of the ascending and descending aorta was significantly greater than that

  5. Determination of entry site for acute type A aortic dissection by initial enhanced CT-scan

    Energy Technology Data Exchange (ETDEWEB)

    Mase, Takenori; Narumiya, Chihiro; Aoyama, Takahiko; Nagata, Yoshihisa [Aichi Medical Univ., Nagakute (Japan). School of Medicine

    2002-01-01

    Acute type A aortic dissection presents a surgical emergency because conservative therapy is not effective in the majority of instances. Enhanced CT-scan of the chest is commonly available and is considered to be an optimal diagnostic method for this disease. The operative strategy is to resect the primary tear to close the entry site of the aortic dissection and replace it with a tubular Dacron graft. Therefore, the existence of the entry site is important in determining the operative procedure. Based on the numerical value of the enhanced CT-scan inspection, the present study seeks to preoperatively identify the location of the presumed entry site in aortic dissection. From May 1996 to June 1999, 21 consecutive patients (Marfan's syndrome excluded) with acute type A aortic dissection underwent surgical treatment. Nineteen patients were preoperatively examined by enhanced CT-scan: 11 men and 8 women, with a mean age of 61 years. CT-scan slices used for early diagnosis were of the ascending aorta, aortic arch, descending aorta, and thoracoabdominal aorta. The largest diameters of the whole and true lumen were measured from cross-sectional aortic images with a personal computer, and the areas of the whole and true lumen were obtained by the manual tracing method. The true ratio was calculated for the largest diameter and area of the whole lumen. The nineteen patients were divided into two groups according to the location of the entry site based on the operating views. Seven patients with the entry site in the ascending aorta were classified as group A, and twelve patients with the entry site further in the aortic arch and descending aorta were classified as group B. Comparisons were performed by non-parametric analysis. Moreover, a discriminant analysis was applied to evaluate the classification between the two groups. The ratio of the largest diameter of the true lumen in group A at the level of the ascending and descending aorta was significantly greater than

  6. Optimizing the user interface of a data entry module for an electronic patient record for cardiac rehabilitation: A mixed method usability approach.

    Science.gov (United States)

    van Engen-Verheul, Mariëtte M; Peute, Linda W P; de Keizer, Nicolette F; Peek, Niels; Jaspers, Monique W M

    2016-03-01

    Cumbersome electronic patient record (EPR) interfaces may complicate data-entry in clinical practice. Completeness of data entered in the EPR determines, among other things, the value of computerized clinical decision support (CCDS). Quantitative usability evaluations can provide insight into mismatches between the system design model of data entry and users' data entry behavior, but not into the underlying causes for these mismatches. Mixed method usability evaluation studies may provide these insights, and thus support generating redesign recommendations for improving an EPR system's data entry interface. To improve the usability of the data entry interface of an EPR system with CCDS in the field of cardiac rehabilitation (CR), and additionally, to assess the value of a mixed method usability approach in this context. Seven CR professionals performed a think-aloud usability evaluation both before (beta-version) and after the redesign of the system. Observed usability problems from both evaluations were analyzed and categorized using Zhang et al.'s heuristic principles of good interface design. We combined the think-aloud usability evaluation of the system's beta-version with the measurement of a new usability construct: users' deviations in action sequence from the system's predefined data entry order sequence. Recommendations for redesign were implemented. We assessed whether the redesign improved CR professionals' (1) task efficacy (with respect to the completeness of data they collected), and (2) task efficiency (with respect to the average number of mouse clicks they needed to complete data entry subtasks). With the system's beta version, 40% of health care professionals' navigation actions through the system deviated from the predefined next system action. The causes for these deviations as revealed by the think-aloud method mostly concerned mismatches between the system design model for data entry action sequences and users expectations of these action

  7. Remarks on numerical semigroups

    International Nuclear Information System (INIS)

    Torres, F.

    1995-12-01

    We extend results on Weierstrass semigroups at ramified points of double covering of curves to any numerical semigroup whose genus is large enough. As an application we strengthen the properties concerning Weierstrass weights state in [To]. (author). 25 refs

  8. Numerical semigroups and applications

    CERN Document Server

    Assi, Abdallah

    2016-01-01

    This work presents applications of numerical semigroups in Algebraic Geometry, Number Theory, and Coding Theory. Background on numerical semigroups is presented in the first two chapters, which introduce basic notation and fundamental concepts and irreducible numerical semigroups. The focus is in particular on free semigroups, which are irreducible; semigroups associated with planar curves are of this kind. The authors also introduce semigroups associated with irreducible meromorphic series, and show how these are used in order to present the properties of planar curves. Invariants of non-unique factorizations for numerical semigroups are also studied. These invariants are computationally accessible in this setting, and thus this monograph can be used as an introduction to Factorization Theory. Since factorizations and divisibility are strongly connected, the authors show some applications to AG Codes in the final section. The book will be of value for undergraduate students (especially those at a higher leve...

  9. Advances in Numerical Methods

    CERN Document Server

    Mastorakis, Nikos E

    2009-01-01

    Features contributions that are focused on significant aspects of current numerical methods and computational mathematics. This book carries chapters that advanced methods and various variations on known techniques that can solve difficult scientific problems efficiently.

  10. Introductory numerical analysis

    CERN Document Server

    Pettofrezzo, Anthony J

    2006-01-01

    Written for undergraduates who require a familiarity with the principles behind numerical analysis, this classical treatment encompasses finite differences, least squares theory, and harmonic analysis. Over 70 examples and 280 exercises. 1967 edition.

  11. Introduction to numerical analysis

    CERN Document Server

    Hildebrand, F B

    1987-01-01

    Well-known, respected introduction, updated to integrate concepts and procedures associated with computers. Computation, approximation, interpolation, numerical differentiation and integration, smoothing of data, other topics in lucid presentation. Includes 150 additional problems in this edition. Bibliography.

  12. Task Switching in a Hierarchical Task Structure: Evidence for the Fragility of the Task Repetition Benefit

    Science.gov (United States)

    Lien, Mei-Ching; Ruthruff, Eric

    2004-01-01

    This study examined how task switching is affected by hierarchical task organization. Traditional task-switching studies, which use a constant temporal and spatial distance between each task element (defined as a stimulus requiring a response), promote a flat task structure. Using this approach, Experiment 1 revealed a large switch cost of 238 ms.…

  13. Numerical analysis of bifurcations

    International Nuclear Information System (INIS)

    Guckenheimer, J.

    1996-01-01

    This paper is a brief survey of numerical methods for computing bifurcations of generic families of dynamical systems. Emphasis is placed upon algorithms that reflect the structure of the underlying mathematical theory while retaining numerical efficiency. Significant improvements in the computational analysis of dynamical systems are to be expected from more reliance of geometric insight coming from dynamical systems theory. copyright 1996 American Institute of Physics

  14. Numerical computations with GPUs

    CERN Document Server

    Kindratenko, Volodymyr

    2014-01-01

    This book brings together research on numerical methods adapted for Graphics Processing Units (GPUs). It explains recent efforts to adapt classic numerical methods, including solution of linear equations and FFT, for massively parallel GPU architectures. This volume consolidates recent research and adaptations, covering widely used methods that are at the core of many scientific and engineering computations. Each chapter is written by authors working on a specific group of methods; these leading experts provide mathematical background, parallel algorithms and implementation details leading to

  15. The effects of foreign banks entry in emerging market economies

    Directory of Open Access Journals (Sweden)

    MSc. Florida Veljanoska

    2011-12-01

    Full Text Available This paper investigates the effects of foreign bank entry in emerging markets. We developed a picture of a multinational bank in an emerging markets by combining statistics from several sources, in order to explore broad range of effects that brings foreign bank entry in the developing countries. Some impacts of foreign bank entry have been thoroughly studied, while others are hardly mention. Entry of foreign bank brings large benefits to host country’s financial system and economies at large. This paper is studying those benefits very carefully, by analyzing the impact of foreign bank entry on economy, government, monetary policy, large enterprises, small and medium size enterprises, domestic bank etc. But, we also consider the fact that at the same time, foreign investment in the financial sector, rises some concerns, and therefore we analyze the negative effects as well. At the end we must admit that although there are some negative consequences from foreign bank entry in emerging markets, the benefits that arise from foreign banks penetration are much more, and this trend of foreign bank entry has brought new positive economic impulse in developing world.

  16. Macrophage sphingolipids are essential for the entry of mycobacteria.

    Science.gov (United States)

    Viswanathan, Gopinath; Jafurulla, Md; Kumar, G Aditya; Raghunand, Tirumalai R; Chattopadhyay, Amitabha

    2018-07-01

    Mycobacteria are intracellular pathogens that can invade and survive within host macrophages. Mycobacterial infections remain a major cause of mortality and morbidity worldwide, with serious concerns of emergence of multi and extensively drug-resistant tuberculosis. While significant advances have been made in identifying mycobacterial virulence determinants, the detailed molecular mechanism of internalization of mycobacteria into host cells remains poorly understood. Although several studies have highlighted the crucial role of sphingolipids in mycobacterial growth, persistence and establishment of infection, the role of sphingolipids in the entry of mycobacteria into host cells is not known. In this work, we explored the role of host membrane sphingolipids in the entry of Mycobacterium smegmatis into J774A.1 macrophages. Our results show that metabolic depletion of sphingolipids in host macrophages results in a significant reduction in the entry of M. smegmatis. Importantly, the entry of Escherichia coli into host macrophages under similar conditions remained invariant, implying the specificity of the requirement of sphingolipids in mycobacterial entry. To the best of our knowledge, our results constitute the first report demonstrating the role of host macrophage sphingolipids in the entry of mycobacteria. Our results could help in the development of novel therapeutic strategies targeting sphingolipid-mediated entry of mycobacteria into host cells. Copyright © 2018 Elsevier B.V. All rights reserved.

  17. Landing and Population Hazard Analysis for Stardust Entry in Operations and Entry Planning

    Science.gov (United States)

    Tooley, Jeffrey; Desai, Prasun N.; Lynos, Daniel T.; Hirst, Edward A.; Wahl, Tom E.; Wawrzyniak, Georffery G.

    2006-01-01

    Stardust is a comet sample return mission that successfully returned to Earth on January 15, 2006. Stardust's targeted landing area was the Utah Test and Training Range in the Northwest corner of Utah. Requirements for the risks associated with landing were levied on Stardust by the Utah Test and Training Range and NASA. This paper describes the analysis to verify that these requirements were met and and includes calculation of debris survivability, generation of landing site selection plots, and identification of keep-out zones, as well as appropriate selection of the landing site. Operationally the risk requirements were all met for both of the GOMO-GO polls, so entry was authorized.

  18. Robot task space analyzer

    International Nuclear Information System (INIS)

    Hamel, W.R.; Osborn, J.

    1997-01-01

    Many nuclear projects such as environmental restoration and waste management challenges involve radiation or other hazards that will necessitate the use of remote operations that protect human workers from dangerous exposures. Remote work is far more costly to execute than what workers could accomplish directly with conventional tools and practices because task operations are slow and tedious due to difficulties of remote manipulation and viewing. Decades of experience within the nuclear remote operations community show that remote tasks may take hundreds of times longer than hands-on work; even with state-of-the-art force- reflecting manipulators and television viewing, remote task performance execution is five to ten times slower than equivalent direct contact work. Thus the requirement to work remotely is a major cost driver in many projects. Modest improvements in the work efficiency of remote systems can have high payoffs by reducing the completion time of projects. Additional benefits will accrue from improved work quality and enhanced safety

  19. Performing Task Integration

    DEFF Research Database (Denmark)

    Elkjaer, Bente; Nickelsen, Niels Christian Mossfeldt

    by shared goals and knowledge as well as mutual respect and frequent, timely, accurate and problem-solving ways of communication with the purpose of dealing with the tasks at hand in an integrated way. We introduce and discuss relational coordination theory through a case-study within public healthcare....... Here cross-professional coordination of work was done by scheduled communication twice a day. When we proposed a way for further integration of tasks through an all-inclusive team organization, we were met with resistance. We use the study to discuss whether relational coordination theory is able to do...... away with differences regarding task definitions and working conditions as well as professional knowledge hierarchies and responsibilities for parts and wholes....

  20. Count on dopamine: influences of COMT polymorphisms on numerical cognition

    Directory of Open Access Journals (Sweden)

    Annelise eJúlio-Costa

    2013-08-01

    Full Text Available Catechol-O-methyltransferase (COMT is an enzyme that is particularly important for the metabolism of dopamine. Functional polymorphisms of COMT have been implicated in working memory and numerical cognition. This is an exploratory study that aims at investigating associations between COMT polymorphisms, working memory and numerical cognition. Elementary school children from 2th to 6th grades were divided into two groups according to their COMT val158met polymorphism (homozygous for valine allele [n= 61] versus heterozygous plus methionine homozygous children or met+ group [n=94]. Both groups were matched for age and intelligence. Working memory was assessed through digit span and Corsi blocks. Symbolic numerical processing was assessed through transcoding and single-digit word problem tasks. Non-symbolic magnitude comparison and estimation tasks were used to assess number sense. Between-group differences were found in symbolic and non-symbolic numerical tasks, but not in working memory tasks. Children in the met+ group showed better performance in all numerical tasks while val homozygous children presented slower development of non-symbolic magnitude representations. These results suggest COMT-related dopaminergic modulation may be related not only to working memory, as found in previous studies, but also to the development of magnitude processing and magnitude representations.

  1. Organizing Core Tasks

    DEFF Research Database (Denmark)

    Boll, Karen

    has remained much the same within the last 10 years. However, how the core task has been organized has changed considerable under the influence of various “organizing devices”. The paper focusses on how organizing devices such as risk assessment, output-focus, effect orientation, and treatment...... projects influence the organization of core tasks within the tax administration. The paper shows that the organizational transformations based on the use of these devices have had consequences both for the overall collection of revenue and for the employees’ feeling of “making a difference”. All in all...

  2. Comparable stocks, boundedly rational stock markets and IPO entry rates.

    Directory of Open Access Journals (Sweden)

    Jay Chok

    Full Text Available In this study, we examine how initial public offerings (IPO entry rates are affected when stock markets are boundedly rational and IPO firms infer information from their counterparts in the market. We hypothesize a curvilinear relationship between the number of comparable stocks and initial public offerings (IPO entry rates into the NASDAQ Stock Exchange. Furthermore, we argue that trading volume and changes in stock returns partially mediates the relationship between the number of comparable stocks and IPO entry rates. The statistical evidence provides strong support for the hypotheses.

  3. Japanese subsidiaries in the European Union: Entry modes and performance

    Directory of Open Access Journals (Sweden)

    David Tanganelli

    2014-12-01

    Full Text Available Japanese Foreign Direct Investment (FDI in the European Union and its performance were analysed in this work. Three different FDI or entry modes used by Japanese companies to enter the European market were compared, and the presence of a relationship between the selected entry mode and the performance of the subsidiary was investigated. We found that more than half of the Japanese investments in Europe took the form of new ventures, approximately 40% were joint ventures and less than 6% were acquisitions. We found that no specific entry mode performed better than another.

  4. Development of the alternate entry port for the ATF

    International Nuclear Information System (INIS)

    Parsa, Z.

    1993-05-01

    We discussed a second entry port for the Accelerator Test Facility (ATF) injection system at Brookhaven National Laboratory, which consists of a photocathode rf gun and a straight - ahead beamline directly into the 50 MeV linac. The proposed second entry port should improve the beam quality and lower the emittance needed for FEL (Free Electron Laser), and laser - acceleration experiments. A discussion on the laser driven high brightness photoelectrons through the primary entry port (a low energy 180 degrees achromatic double bend transport line) now in operation, and a beam analysis for the proposed secondary port is also given

  5. Predictive Modeling for NASA Entry, Descent and Landing Missions

    Science.gov (United States)

    Wright, Michael

    2016-01-01

    Entry, Descent and Landing (EDL) Modeling and Simulation (MS) is an enabling capability for complex NASA entry missions such as MSL and Orion. MS is used in every mission phase to define mission concepts, select appropriate architectures, design EDL systems, quantify margin and risk, ensure correct system operation, and analyze data returned from the entry. In an environment where it is impossible to fully test EDL concepts on the ground prior to use, accurate MS capability is required to extrapolate ground test results to expected flight performance.

  6. Physics-Based Modeling of Meteor Entry and Breakup

    Science.gov (United States)

    Prabhu, Dinesh K.; Agrawal, Parul; Allen, Gary A., Jr.; Bauschlicher, Charles W., Jr.; Brandis, Aaron M.; Chen, Yih-Kang; Jaffe, Richard L.; Palmer, Grant E.; Saunders, David A.; Stern, Eric C.; hide

    2015-01-01

    A new research effort at NASA Ames Research Center has been initiated in Planetary Defense, which integrates the disciplines of planetary science, atmospheric entry physics, and physics-based risk assessment. This paper describes work within the new program and is focused on meteor entry and breakup.Over the last six decades significant effort was expended in the US and in Europe to understand meteor entry including ablation, fragmentation and airburst (if any) for various types of meteors ranging from stony to iron spectral types. These efforts have produced primarily empirical mathematical models based on observations. Weaknesses of these models, apart from their empiricism, are reliance on idealized shapes (spheres, cylinders, etc.) and simplified models for thermal response of meteoritic materials to aerodynamic and radiative heating. Furthermore, the fragmentation and energy release of meteors (airburst) is poorly understood.On the other hand, flight of human-made atmospheric entry capsules is well understood. The capsules and their requisite heatshields are designed and margined to survive entry. However, the highest speed Earth entry for capsules is 13 kms (Stardust). Furthermore, Earth entry capsules have never exceeded diameters of 5 m, nor have their peak aerothermal environments exceeded 0.3 atm and 1 kW/sq cm. The aims of the current work are: (i) to define the aerothermal environments for objects with entry velocities from 13 to 20 kms; (ii) to explore various hypotheses of fragmentation and airburst of stony meteors in the near term; (iii) to explore the possibility of performing relevant ground-based tests to verify candidate hypotheses; and (iv) to quantify the energy released in airbursts. The results of the new simulations will be used to anchor said risk assessment analyses. With these aims in mind, state-of-the-art entry capsule design tools are being extended for meteor entries. We describe: (i) applications of current simulation tools to

  7. Time and Number Discrimination in a Bisection Task with a Sequence of Stimuli: A Developmental Approach.

    Science.gov (United States)

    Droit-Volet, Sylvie; Clement, Angelique; Fayol, Michel

    2003-01-01

    This study tested 5- and 8-year-olds and adults in a bisection task with a sequence of stimuli in which time and number co-varied. Findings indicated that the number of stimuli interfered with 5-year-olds' performance on the temporal bisection task. Number interference decreased both with age and counting strategy. In the numerical bisection task,…

  8. The Effects of Describing Antecedent Stimuli and Performance Criteria in Task Analysis Instruction for Graphing

    Science.gov (United States)

    Tyner, Bryan C.; Fienup, Daniel M.

    2016-01-01

    Task analyses are ubiquitous to applied behavior analysis interventions, yet little is known about the factors that make them effective. Numerous task analyses have been published in behavior analytic journals for constructing single-subject design graphs; however, learner outcomes using these task analyses may fall short of what could be…

  9. Parsing a cognitive task: a characterization of the mind's bottleneck.

    Directory of Open Access Journals (Sweden)

    Mariano Sigman

    2005-02-01

    Full Text Available Parsing a mental operation into components, characterizing the parallel or serial nature of this flow, and understanding what each process ultimately contributes to response time are fundamental questions in cognitive neuroscience. Here we show how a simple theoretical model leads to an extended set of predictions concerning the distribution of response time and its alteration by simultaneous performance of another task. The model provides a synthesis of psychological refractory period and random-walk models of response time. It merely assumes that a task consists of three consecutive stages-perception, decision based on noisy integration of evidence, and response-and that the perceptual and motor stages can operate simultaneously with stages of another task, while the central decision process constitutes a bottleneck. We designed a number-comparison task that provided a thorough test of the model by allowing independent variations in number notation, numerical distance, response complexity, and temporal asynchrony relative to an interfering probe task of tone discrimination. The results revealed a parsing of the comparison task in which each variable affects only one stage. Numerical distance affects the integration process, which is the only step that cannot proceed in parallel and has a major contribution to response time variability. The other stages, mapping the numeral to an internal quantity and executing the motor response, can be carried out in parallel with another task. Changing the duration of these processes has no significant effect on the variance.

  10. Comparing the demands of destination entry using Google Glass and the Samsung Galaxy S4 during simulated driving.

    Science.gov (United States)

    Beckers, Niek; Schreiner, Sam; Bertrand, Pierre; Mehler, Bruce; Reimer, Bryan

    2017-01-01

    The relative impact of using a Google Glass based voice interface to enter a destination address compared to voice and touch-entry methods using a handheld Samsung Galaxy S4 smartphone was assessed in a driving simulator. Voice entry (Google Glass and Samsung) had lower subjective workload ratings, lower standard deviation of lateral lane position, shorter task durations, faster remote Detection Response Task (DRT) reaction times, lower DRT miss rates, and resulted in less time glancing off-road than the primary visual-manual interaction with the Samsung Touch interface. Comparing voice entry methods, using Google Glass took less time, while glance metrics and reaction time to DRT events responded to were similar. In contrast, DRT miss rate was higher for Google Glass, suggesting that drivers may be under increased distraction levels but for a shorter period of time; whether one or the other equates to an overall safer driving experience is an open question. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Psychophysiological assessment and correction of spatial disorientation during simulated Orion spacecraft re-entry.

    Science.gov (United States)

    Cowings, Patricia S; Toscano, William B; Reschke, Millard F; Tsehay, Addis

    2018-03-02

    The National Aeronautics and Space Administration (NASA) has identified a potential risk of spatial disorientation, motion sickness, and degraded performance to astronauts during re-entry and landing of the proposed Orion crew vehicle. The purpose of this study was to determine if a physiological training procedure, Autogenic-Feedback Training Exercise (AFTE), can mitigate these adverse effects. Fourteen men and six women were assigned to two groups (AFTE, no-treatment Control) matched for motion sickness susceptibility and gender. All subjects received a standard rotating chair test to determine motion sickness susceptibility; three training sessions on a manual performance task; and four exposures in the rotating chair (Orion tests) simulating angular accelerations of the crew vehicle during re-entry. AFTE subjects received 2 h of training before Orion tests 2, 3, and 4. Motion sickness symptoms, task performance, and physiological measures were recorded on all subjects. Results showed that the AFTE group had significantly lower symptom scores when compared to Controls on test 2 (p = .05), test 3 (p = .03), and test 4 (p = .02). Although there were no significant group differences on task performance, trends showed that AFTE subjects were less impaired than Controls. Heart rate change scores (20 rpm minus baseline) of AFTE subjects indicated significantly less reactivity on Test 4 compared to Test 1 (10.09 versus 16.59, p = .02), while Controls did not change significantly across tests. Results of this study indicate that AFTE may be an effective countermeasure for mitigating spatial disorientation and motion sickness in astronauts. Copyright © 2018. Published by Elsevier B.V.

  12. Data Center Tasking.

    Science.gov (United States)

    Temares, M. Lewis; Lutheran, Joseph A.

    Operations tasking for data center management is discussed. The original and revised organizational structures of the data center at the University of Miami are also described. The organizational strategy addresses the functions that should be performed by the data center, anticipates the specialized skills required, and addresses personnel…

  13. Biomedical applications engineering tasks

    Science.gov (United States)

    Laenger, C. J., Sr.

    1976-01-01

    The engineering tasks performed in response to needs articulated by clinicians are described. Initial contacts were made with these clinician-technology requestors by the Southwest Research Institute NASA Biomedical Applications Team. The basic purpose of the program was to effectively transfer aerospace technology into functional hardware to solve real biomedical problems.

  14. India's Unfinished Telecom Tasks

    Indian Academy of Sciences (India)

    India's Telecom Story is now well known · Indian Operators become an enviable force · At the same time · India Amongst the Leaders · Unfinished Tasks as Operators · LightGSM ON: Innovation for Rural Area from Midas · Broadband Access Options for India · Broadband driven by DSL: still too slow · Is Wireless the answer?

  15. Game Changing Transformable Entry System Technology Applicability to Robotic Venus Science Missions

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovative adpative deployable entry and placement technology (ADEPT), also known as transformable entry system technology (TEST) concept, akin to an umbrella,...

  16. Overview of the Mars Sample Return Earth Entry Vehicle

    Science.gov (United States)

    Dillman, Robert; Corliss, James

    2008-01-01

    NASA's Mars Sample Return (MSR) project will bring Mars surface and atmosphere samples back to Earth for detailed examination. Langley Research Center's MSR Earth Entry Vehicle (EEV) is a core part of the mission, protecting the sample container during atmospheric entry, descent, and landing. Planetary protection requirements demand a higher reliability from the EEV than for any previous planetary entry vehicle. An overview of the EEV design and preliminary analysis is presented, with a follow-on discussion of recommended future design trade studies to be performed over the next several years in support of an MSR launch in 2018 or 2020. Planned topics include vehicle size for impact protection of a range of sample container sizes, outer mold line changes to achieve surface sterilization during re-entry, micrometeoroid protection, aerodynamic stability, thermal protection, and structural materials selection.

  17. 19 CFR 122.26 - Entry and clearance.

    Science.gov (United States)

    2010-04-01

    ... AIR COMMERCE REGULATIONS Private Aircraft § 122.26 Entry and clearance. Private aircraft, as defined... information as set forth in § 122.22(c), and grants electronic clearance via electronic mail or telephone...

  18. Ordering the Senses in a Monolingual Dictionary Entry.

    Science.gov (United States)

    Gold, David L.

    1986-01-01

    Reviews issues to be considered in determining the order of meanings for a lexeme in a dictionary entry and compares techniques for deciding order. Types of ordering include importance, frequency, logical ordering, dominant meaning, syntactic, and historical. (MSE)

  19. Electronic Chemotherapy Order Entry: A Major Cancer Center's Implementation

    OpenAIRE

    Sklarin, Nancy T.; Granovsky, Svetlana; O'Reilly, Eileen M.; Zelenetz, Andrew D.

    2011-01-01

    Implementation of computerized provider order entry for complex chemotherapy regimens supported Memorial Sloan-Kettering Cancer Center's strategic plan to successfully establish a distributive, networked health care delivery system.

  20. 9 CFR 590.430 - Limitation on entry of material.

    Science.gov (United States)

    2010-01-01

    ... conditions as he may prescribe to assure that allowing the entry of such articles will be consistent with the... inventory controls are maintained at all times. Inedible egg products may be processed in official plants...

  1. The Significance of Barriers to Entry in the Construction Industry

    Directory of Open Access Journals (Sweden)

    Gerard de Valence

    2012-11-01

    Full Text Available This research looks at the significance of barriers that firms considering entry into the construction industry might face. Drawing on the microeconomic characteristics of imperfectly competitive and oligopolistic markets the analysis finds that there are a dozen barriers to entry that affect the industry, but their significance depends on the product type. The discussion covers the question of product homogeneity in construction and evidence for the existence of barriers to entry in concentration levels. Barriers to entry specific to construction are then identified, which leads to an analysis of how they operate and their significance (high, medium or low in different market types, thus increasing our understanding of construction industry dynamics.

  2. The state-of-the-art port of entry workshop

    Energy Technology Data Exchange (ETDEWEB)

    Godfrey, B.

    1995-05-01

    The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improving port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.

  3. Effects of Varying Entry Points and Trendelenburg Positioning ...

    African Journals Online (AJOL)

    2018-04-04

    Apr 4, 2018 ... ... made in superior and inferior entry points at supine position at 0° .... Trendelenburg degree, taking all risks into consideration. As a result of our .... patient's position influences the incidence of dysrhythmias during pulmonary.

  4. 19 CFR 141.19 - Declaration of entry.

    Science.gov (United States)

    2010-04-01

    ... of consignee—(1) Authorized agent with knowledge of the facts. When entry is made in a consignee's name by an agent who has knowledge of the facts and who is authorized under a proper power of attorney...

  5. Mechanism of lymphocytic choriomeningitis virus entry into cells.

    Science.gov (United States)

    Borrow, P; Oldstone, M B

    1994-01-01

    The path that the arenavirus lymphocytic choriomeningitis virus (LCMV) uses to enter rodent fibroblastic cell lines was dissected by infectivity and inhibition studies and immunoelectron microscopy. Lysosomotropic weak bases (chloroquine and ammonium chloride) and carboxylic ionophores (monensin and nigericin) inhibited virus entry, assessed as virus nucleoprotein expression at early times post-infection, indicating that the entry process involved a pH-dependent fusion step in intracellular vesicles. That entry occurred in vesicles rather than by direct fusion of virions with the plasma membrane was confirmed by immunoelectron microscopy. The vesicles involved were large (150-300 nm diameter), smooth-walled, and not associated with clathrin. Unlike classical phagocytosis, virus uptake in these vesicles was a microfilament-independent process, as it was not blocked by cytochalasins. LCMV entry into rodent fibroblast cell lines thus involves viropexis in large smooth-walled vesicles, followed by a pH-dependent fusion event inside the cell.

  6. Adapting Mars Entry, Descent and Landing System for Earth

    Science.gov (United States)

    Heilimo, J.; Harri, A.-M.; Aleksashkin, S.; Koryanov, V.; Guerrero, H.; Schmidt, W.; Haukka, H.; Finchenko, V.; Martynov, M.; Ostresko, B.; Ponomarenko, A.; Kazakovtsev, V.; Arruego, I.; Martin, S.; Siili, T.

    2013-09-01

    In 2001 - 2011 an inflatable Entry, Descent and Landing System (EDLS) for Martian atmosphere was developed by FMI and the MetNet team. This MetNet Mars Lander EDLS is used in both the initial deceleration during atmospheric entry and in the final deceleration before the semi-hard impact of the penetrator to Martian surface. The EDLS design is ingenious and its applicability to Earth's atmosphere is studied in the on-going project. In particular, the behavior of the system in the critical transonic aerodynamic (from hypersonic to subsonic) regime will be investigated. This project targets to analyze and test the transonic behavior of this compact and light weight payload entry system to Earth's atmosphere [1]. Scaling and adaptation for terrestrial atmospheric conditions, instead of a completely new design, is a favorable approach for providing a new re-entry vehicle for terrestrial space applications.

  7. ANNOTATED BIBLIOGRAPHY OF ASTRODYNAMICS AND RE-ENTRY MECHANICS,

    Science.gov (United States)

    A selected list of references in the fields of astronautics and re-entry mechanics is classified and discussed, and a comprehensive subject and author index is included for ease in locating the references. (Author)

  8. AIRLINE COMPETITION: Barriers to Entry Continue in Some Domestic Markets

    National Research Council Canada - National Science Library

    1998-01-01

    .... Airline deregulation has led to lower fares and better service for most air travelers largely because of increased competition spurred by the entry of new airlines into the industry and established...

  9. 77 FR 5681 - Establishment of Global Entry Program

    Science.gov (United States)

    2012-02-06

    ...) of the Intelligence Reform and Terrorism Prevention Act of 2004 (IRTPA), 118 Stat. 3638, as amended... major airport authority printed its own signs for Global Entry and strategically placed them throughout...

  10. Simulation of the ATV Re-Entry Obsrvations

    Science.gov (United States)

    Bastida Virgili, B.; Krag, H.; Lips, T.; De Pasquale, E.

    2010-09-01

    The first ATV was launched on 9th March 2008 and, after a successful mission, the last phase was a controlled destructive re-entry on 29th September 2008, shortly after 13:30 UTC, in which the remains of the ATV and its load fell into the South Pacific Ocean. In order to better understand the re-entry processes, an insitu optical observation campaign was launched to record and analyze the ATV controlled re-entry with several instruments on board of two airplanes and also from the ISS. This observation campaign was successful and triggered several different still-ongoing studies on the extraction and analysis of data to draw conclusions on the adequacy of the re-entry break-up and explosion models used for the safety analysis of the ATV re-entry. This paper addresses the validation process for ESA’s model for re-entry survivability and on-ground risk assessment for explosive re-entry events using the observation data. The underlying rationale is to improve the models for the benefit of planning and execution of future controlled re-entries and in risk calculation in case of uncontrolled ones. The re-entry trajectory of the ATV, the explosive event and the trajectories of the fragments are simulated with the existing ESA tools and the EVOLVE explosion model. Additional software has been developed to simulate airborne sensor field of view(FOV) crossings based on the aircraft trajectories, attitude profile, sensor mounts and FOVs. Sensor performance and object radiation are modeled in order to generate synthetic images for the different sensors in the ISS and the two airplanes. These synthetic images and synthetic videos are compared with the available reentry observations of the ATV. This paper will present the software and techniques to generate synthetic imagery. It will give results of the comparison between the simulated and the real trajectories and fragmentation and explain the subsequent validation process of the ESA re-entry tools and the potential

  11. Franchising as a method of entry to the market

    OpenAIRE

    Vargovčíková, Lucie

    2011-01-01

    The subject of presented bachelor thesis is Franchising as a method of entry to the market. The first part of this thesis deals with characteristics of franchising such as the definition of franchising and its advantages and disadvantages for both parties involved. Then there is also provided the current situation of franchising in the Czech Republic. The second part deals with entry into the market by franchising. In this section franchise agreement is mainly mentioned, how to start a franch...

  12. Predictors of student success in entry-level science courses

    Science.gov (United States)

    Singh, Mamta K.

    Although the educational evaluation process is useful and valuable and is supported by the Higher Education Act, a strong research base for program evaluation of college entry-level science courses is still lacking. Studies in science disciplines such as, biology, chemistry, and physics have addressed various affective and demographic factors and their relationships to student achievement. However, the literature contains little information that specifically addresses student biology content knowledge skills (basics and higher order thinking skills) and identifies factors that affect students' success in entry-level college science courses. These gate-keeping courses require detailed evaluation if the goal of an institution is to increase students' performance and success in these courses. These factors are, in fact, a stepping stone for increasing the number of graduates in Science, Technology, Engineering, and Mathematics (STEM) majors. The present study measured students' biology content knowledge and investigated students' performance and success in college biology, chemistry, and physics entry-level courses. Seven variables---gender, ethnicity, high school Grade Point Average (GPA), high school science, college major, school financial aid support, and work hours were used as independent variables and course final performance as a dichotomous dependent variable. The sample comprised voluntary student participants in entry-level science courses. The study attempted to explore eight research questions. Content knowledge assessments, demographic information analysis, multiple regression analysis, and binary logistic regression analysis were used to address research questions. The results suggested that high school GPA was a consistently good predictor of students' performance and success in entry-level science courses. Additionally, high school chemistry was a significant predictor variable for student success in entry-level biology and chemistry courses

  13. ExoMars entry, descent and landing science

    OpenAIRE

    Ferri, F.; Lewis, S. R.; Withers, P.; Aboudan, A.; Bettanini, C.; Colombatti, G.; Debei, S.; Golombek, M.; Harri, A. M.; Komatsu, G.; Leese, M. R.; Mäkinen, T.; Müller-Wodarg, I.; Ori, G. G.; Patel, M. R.

    2011-01-01

    The entry, descent and landing of ExoMars offer a rare (once-per-mission) opportunity to perform in situ investigation of the martian environment over a wide altitude range. Entry, Descent and Landing System (EDLS) measurements can provide essential data for atmospheric scientific investigations.\\ud \\ud We intend to perform atmospheric science measurements by exploiting data from EDLS engineering sensors and exploiting their readings beyond the expected engineering information.

  14. Double Entry Bookkeeping and Kitab-us Siyakat

    OpenAIRE

    Örten, Remzi; Kurt, Ganite; Torun, Salih

    2011-01-01

    It is known that accounting is applied since the existence of human being. When historical development of accounting is examined, recording methods may be summarized as single sided and double sided. The first method used in accounting is the single entry bookkeeping. According to this entry, not all of information related to financial events but important part of them are recorded in a single way. We can specify follow-up of receivable, payable, incomes and expenses as single sided recording...

  15. Finnish market entry planning of franchising Kungfu catering

    OpenAIRE

    Liu, Yun

    2011-01-01

    The purpose of this thesis was to carry out a market entry planning by franchising Kungfu catering in Finland. Kungfu catering was a typical Chinese fast food restaurant, of which there was a gap in Finnish fast food market. McDonald’s and Hesburger were succesful examples of franchise business, experiences of those 2 restaurants were used for reference to create a suitable franchise strategy for Kungfu Finland. Finnish market entry planning of Kungfu Finland has been explained from several a...

  16. Multinationals’ mode of entry with presence of vertical spillovers

    OpenAIRE

    Balsvik, Ragnhild

    2004-01-01

    Multinationals’ mode of foreign expansion may depend on whether or not they expect technological externalities or spillovers to generate new competition. Existing models where ex-post spillovers affect the ex-ante entry choice usually study the choice between exporting and FDI with horizontal spillovers. I consider a monopoly firm with a vertical production structure that has four possible modes of entry, one of which includes outsourcing of intermediate input production to a h...

  17. Response to Competitive Entry: A Rationale for Delayed Defensive Reaction

    OpenAIRE

    Ajay Kalra; Surendra Rajiv; Kannan Srinivasan

    1998-01-01

    Empirical studies examining responses to new product entries come to the puzzling conclusion that, in general, an incumbent reacts to a new entrant after a significant delay. Even easy-to-implement price cuts are observed after significant lag following entry. These findings seem to contradict the existing literature that either implicitly assumes or strongly advocates immediate defensive responses to limit competitive encroachment. When a competing firm enters the market, consumers may be un...

  18. Design features of an automated entry control system

    International Nuclear Information System (INIS)

    Reynolds, D.A.

    1978-01-01

    Features of an entry control system designed to automatically control access to nuclear facilities is described. Control independent of variable human factors is stressed, but security force action is required for assessment and response as a result of an alarm. A design based on a distributed processing capability is utilized. Flexibility and generality are emphasized in an effort to maximize applicability to the entry-control problem faced by nuclear facilities upgrading security as a result of the Safeguards Program

  19. Gender Differences in Entry Wages and Early Career Wages

    OpenAIRE

    Astrid KUNZE

    2003-01-01

    This paper investigates the gender wage gap in entry wages and in the early career for German skilled workers in the period 1975-1990. We use a new administrative longitudinal data source that allows to observe complete work and skill accumulation histories from the beginning for up to 13 years in the labour market. Descriptives show an entry wage differential of 22 percent between male and female full-time workers. Furthermore, the differential stays almost constant throughout the first 8 ei...

  20. Is the ICU staff satisfied with the computerized physician order entry? A cross-sectional survey study

    Science.gov (United States)

    Fumis, Renata Rego Lins; Costa, Eduardo Leite Vieira; Martins, Paulo Sergio; Pizzo, Vladimir; Souza, Ivens Augusto; Schettino, Guilherme de Paula Pinto

    2014-01-01

    Objective To evaluate the satisfaction of the intensive care unit staff with a computerized physician order entry and to compare the concept of the computerized physician order entry relevance among intensive care unit healthcare workers. Methods We performed a cross-sectional survey to assess the satisfaction of the intensive care unit staff with the computerized physician order entry in a 30-bed medical/surgical adult intensive care unit using a self-administered questionnaire. The questions used for grading satisfaction levels were answered according to a numerical scale that ranged from 1 point (low satisfaction) to 10 points (high satisfaction). Results The majority of the respondents (n=250) were female (66%) between the ages of 30 and 35 years of age (69%). The overall satisfaction with the computerized physician order entry scored 5.74±2.14 points. The satisfaction was lower among physicians (n=42) than among nurses, nurse technicians, respiratory therapists, clinical pharmacists and diet specialists (4.62±1.79 versus 5.97±2.14, pdigitalization decreased the workload and contributed to the intensive care unit quality with a user-friendly and accurate system and that digitalization provided concise information within a reasonable time frame. PMID:24770682

  1. Analysis of Ventilation Regimes of the Oblique Wedge-Shaped Surface Piercing Hydrofoil During Initial Water Entry Process

    Directory of Open Access Journals (Sweden)

    Ghadimi Parviz

    2018-03-01

    Full Text Available The suction side of a surface piercing hydrofoil, as a section of a Surface Piercing Propeller (SPP, is usually exposed to three phases of flow consisting air, water, and vapour. Hence, ventilation and cavitation pattern of such section during the initial phase of water entry plays an essential role for the propeller’s operational curves. Accordingly, in the current paper a numerical simulation of a simple surface piercing hydrofoil in the form of an oblique wedge is conducted in three-phase environment by using the coupled URANS and VOF equations. The obtained results are validated against water entry experiments and super-cavitation tunnel test data. The resulting pressure curves and free surface profiles of the wedge water entry are presented for different velocity ratios ranging from 0.12 to 0.64. Non-dimensional forces and efficiency relations are defined in order to present the wedge water entry characteristics. Congruent patterns are observed between the performance curves of the propeller and the wedge in different fully ventilated or partially cavitated operation modes. The transition trend from fully ventilated to partially cavitated operation of the surface piercing section of a SPP is studied and analyzed through wedge’s performance during the transitional period.

  2. Numerical Transducer Modeling

    DEFF Research Database (Denmark)

    Henriquez, Vicente Cutanda

    This thesis describes the development of a numerical model of the propagation of sound waves in fluids with viscous and thermal losses, with application to the simulation of acoustic transducers, in particular condenser microphones for measurement. The theoretical basis is presented, numerical...... manipulations are developed to satisfy the more complicated boundary conditions, and a model of a condenser microphone with a coupled membrane is developed. The model is tested against measurements of ¼ inch condenser microphones and analytical calculations. A detailed discussion of the results is given....

  3. On numerical Bessel transformation

    International Nuclear Information System (INIS)

    Sommer, B.; Zabolitzky, J.G.

    1979-01-01

    The authors present a computer program to calculate the three dimensional Fourier or Bessel transforms and definite integrals with Bessel functions. Numerical integration of systems containing Bessel functions occurs in many physical problems, e.g. electromagnetic form factor of nuclei, all transitions involving multipole expansions at high momenta. Filon's integration rule is extended to spherical Bessel functions. The numerical error is of the order of the Simpson error term of the function which has to be transformed. Thus one gets a stable integral even at large arguments of the transformed function. (Auth.)

  4. Industrial numerical analysis

    International Nuclear Information System (INIS)

    McKee, S.; Elliott, C.M.

    1986-01-01

    The applications of mathematics to industrial problems involves the formulation of problems which are amenable to mathematical investigation, mathematical modelling, the solution of the mathematical problem and the inter-pretation of the results. There are 12 chapters describing industrial problems where mathematics and numerical analysis can be applied. These range from the numerical assessment of the flatness of engineering surfaces and plates, the design of chain links, control problems in tidal power generation and low thrust satellite trajectory optimization to mathematical models in welding. One chapter, on the ageing of stainless steels, is indexed separately. (UK)

  5. Microprocessor multi-task monitor

    International Nuclear Information System (INIS)

    Ludemann, C.A.

    1983-01-01

    This paper describes a multi-task monitor program for microprocessors. Although written for the Intel 8085, it incorporates features that would be beneficial for implementation in other microprocessors used in controlling and monitoring experiments and accelerators. The monitor places permanent programs (tasks) arbitrarily located throughout ROM in a priority ordered queue. The programmer is provided with the flexibility to add new tasks or modified versions of existing tasks, without having to comply with previously defined task boundaries or having to reprogram all of ROM. Scheduling of tasks is triggered by timers, outside stimuli (interrupts), or inter-task communications. Context switching time is of the order of tenths of a milllisecond

  6. Acceptions of the "death"entry in language dictionaries

    Directory of Open Access Journals (Sweden)

    Jessica Camara Siqueira

    2013-08-01

    Full Text Available Language dictionaries present the meaning of an entry in a way not restricted to linguistic information, since we also have interdisciplinary and contextual aspects that dialogue with socio-cultural issues in which the entry is inserted. Considering the potential character of the study of contextual meanings, the “death” entry was chosen to carry out a comparative analysis among language dictionaries. The choice was motivated by the recurrence of this entry in ancient and contemporary dictionaries, and the fact of its having a concept that allows various historical, social and ideological discussions. The goal is to reveal the different nuances of the “death” entry in language dictionaries, observing four main aspects: etymology, diachrony, synonymic construction and meaning of “death” in school dictionaries. Based on lexicographical studies of classical authors, we did a comparative analysis of meanings of “death” in different types of language dictionaries. We found that in each group dictionary we may find traces of ideological choices in the construction of the contextual meaning of the “death” entry.

  7. Three-stage entry game: The strategic effects of advertising

    Directory of Open Access Journals (Sweden)

    Kuzmanović Marija

    2011-01-01

    Full Text Available This paper analyzes the effects of investment in advertising in the three-stage entry game model with one incumbent and one potential entrant firm. It is shown that if a game theory is applied, under particular conditions, advertising can be used as a strategic weapon in the market entry game. Depending on the level of the advertising interaction factor, conditions for over-investment in advertising for strategic purposes are given. Furthermore, three specific cases are analyzed: strictly predatory advertising, informative advertising and the case when one firm’s advertising cannot directly influence the other firm's profit. For each of them, depending on the costs of advertising and marginal costs, equilibrium is determined, and conditions under which it is possible to deter the entry are given. It is shown that if the value of the advertising interaction factor increases, power of using advertising as a weapon to deter entry into the market decreases. Thus, in the case of informative advertising, advertising cannot be used as a tool for deterring entry into the market, while in the case of predatory advertising, it can. Also, we have proved that in the case of strictly informative advertising an over-investment never occurs, while in the two other cases, there is always over-investment either to deter or to accommodate the entry.

  8. Effects ok ikea's entry into a furniture production cluster

    Directory of Open Access Journals (Sweden)

    Vasco Eiriz

    2016-04-01

    Full Text Available The entry of a multinational into a cluster, a geographic agglomeration in a given place or region of predominantly small and medium enterprises specialized in a given industry or related industries, impacts the incumbent in the cluster. Aiming to identify the main effects of a multinational entry on the firms’ strategy in a cluster, it was analyzed the entry of IKEA, a Swedish multinational, into the cluster of furniture production in Paços de Ferreira and Paredes, in Portugal. In this study, the data collection technique to access primary data was a survey. The sample has small enterprises, which is similar to the structure of firms in the studied cluster. Results show that more than half the sample thinks that the entry of the multinational had not affected them. However, the firms that acknowledge a significant impact, assess that impact as negative. The competitiveness factors that have improved more significantly after IKEA’s entry were new product development and exporting strategies. The main responses of incumbent firms to the multinational entry were internationalization and the development of generic strategies of differentiation and focus based on differentiation.

  9. An Entry Flight Controls Analysis for a Reusable Launch Vehicle

    Science.gov (United States)

    Calhoun, Philip

    2000-01-01

    The NASA Langley Research Center has been performing studies to address the feasibility of various single-stage to orbit concepts for use by NASA and the commercial launch industry to provide a lower cost access to space. Some work on the conceptual design of a typical lifting body concept vehicle, designated VentureStar(sup TM) has been conducted in cooperation with the Lockheed Martin Skunk Works. This paper will address the results of a preliminary flight controls assessment of this vehicle concept during the atmospheric entry phase of flight. The work includes control analysis from hypersonic flight at the atmospheric entry through supersonic speeds to final approach and landing at subsonic conditions. The requirements of the flight control effectors are determined over the full range of entry vehicle Mach number conditions. The analysis was performed for a typical maximum crossrange entry trajectory utilizing angle of attack to limit entry heating and providing for energy management, and bank angle to modulation of the lift vector to provide downrange and crossrange capability to fly the vehicle to a specified landing site. Sensitivity of the vehicle open and closed loop characteristics to CG location, control surface mixing strategy and wind gusts are included in the results. An alternative control surface mixing strategy utilizing a reverse aileron technique demonstrated a significant reduction in RCS torque and fuel required to perform bank maneuvers during entry. The results of the control analysis revealed challenges for an early vehicle configuration in the areas of hypersonic pitch trim and subsonic longitudinal controllability.

  10. Effects of periodic atmospheric pressure variation on radon entry into buildings

    Science.gov (United States)

    Tsang, Y. W.; Narasimhan, T. N.

    1992-06-01

    Using a mathematical model, we have investigated the temporal variations of radon entry into a house basement in the presence of time-dependent periodic variations of barometric pressure as well as a persistent small steady depressurization within the basement. The tool for our investigation is an integral finite difference numerical code which can solve for both diffusive and advective flux of radon in the soil gas which is treated as a slightly compressible fluid. Two different boundary conditions at the house basement are considered: (1) a dirt floor basement so that diffusion is equally or more important than advective transport, and (2) an "impermeable" cement basement except for a 1-cm-wide crack near the perimeter of the basement floor; in which case, advective transport of radon flux dominates. Two frequencies of barometric pressure fluctuation with representative values of amplitudes, based on a Fourier decomposition of barometric pressure data, were chosen in this study: one with a short period of 0.5 hour with pressure amplitude of 50 Pa, the other a diurnal variation with a period of 24 hours with the typical pressure amplitude of 250 Pa. For a homogeneous soil medium with soil permeability to air between 10-13 and 10-10 m2, we predict that the barometric fluctuations increase the radon entry into the basement by up to 120% of the steady radon inflow into the basement owing to a steady depressurization of 5 Pa. If soil permeability heterogeneity is present, such as the presence of a thin layer of higher permeability aggregate immediately below the basement floor, radon flux due to atmospheric pumping is further increased. Effects of pressure pumping on radon entry are also compared to diffusion-only transport when the steady depressurization is absent. It is found that contribution to radon entry is significant for the basement crack configuration. In particular, for pressure pumping at 0.5-hour period and for a homogeneous medium of permeability of 10

  11. A roving dual-presentation simultaneity-judgment task to estimate the point of subjective simultaneity

    Directory of Open Access Journals (Sweden)

    Kielan eYarrow

    2016-03-01

    Full Text Available The most popular tasks with which to investigate the perception of subjective synchrony are the temporal order judgment (TOJ and the simultaneity judgment (SJ. Here we discuss a complementary approach – a dual-presentation (2x SJ task – and focus on appropriate analysis methods for a theoretically desirable roving design. Two stimulus pairs are presented on each trial and the observer must select the most synchronous. To demonstrate this approach, in Experiment 1 we tested the 2xSJ task alongside TOJ, SJ and simple reaction-time (RT tasks using audiovisual stimuli. We interpret responses from each task using detection-theoretic models, which assume variable arrival times for sensory signals at critical brain structures for timing perception. All tasks provide similar estimates of the point of subjective simultaneity (PSS on average, and PSS estimates from some tasks were correlated on an individual basis. The 2xSJ task produced lower and more stable estimates of model-based (and thus comparable sensory/decision noise than the TOJ. In Experiment 2 we obtained similar results using RT, TOJ, ternary and 2xSJ tasks for all combinations of auditory, visual and tactile stimuli. In Experiment 3 we investigated attentional prior entry, using both TOJs and 2xSJs. We found that estimates of prior-entry magnitude correlated across these tasks. Overall, our study establishes the practicality of the roving dual-presentation SJ task, but also illustrates the additional complexity of the procedure. We consider ways in which this task might complement more traditional procedures, particularly when it is important to estimate both PSS and sensory/decisional noise.

  12. Numerical analysis using Sage

    CERN Document Server

    Anastassiou, George A

    2015-01-01

    This is the first numerical analysis text to use Sage for the implementation of algorithms and can be used in a one-semester course for undergraduates in mathematics, math education, computer science/information technology, engineering, and physical sciences. The primary aim of this text is to simplify understanding of the theories and ideas from a numerical analysis/numerical methods course via a modern programming language like Sage. Aside from the presentation of fundamental theoretical notions of numerical analysis throughout the text, each chapter concludes with several exercises that are oriented to real-world application.  Answers may be verified using Sage.  The presented code, written in core components of Sage, are backward compatible, i.e., easily applicable to other software systems such as Mathematica®.  Sage is  open source software and uses Python-like syntax. Previous Python programming experience is not a requirement for the reader, though familiarity with any programming language is a p...

  13. Numerical analysis targets

    International Nuclear Information System (INIS)

    Sollogoub, Pierre

    2001-01-01

    Numerical analyses are needed in different steps of the overall design process. Complex models or non-linear reactor core behaviour are important for qualification and/or comparison of results obtained. Adequate models and test should be defined. Fuel assembly, fuel row, and the complete core should be tested for seismic effects causing LOCA and flow-induced vibrations (FIV)

  14. Development of numerical concepts

    Directory of Open Access Journals (Sweden)

    Sabine Peucker

    2013-06-01

    Full Text Available The development of numerical concepts is described from infancy to preschool age. Infants a few days old exhibit an early sensitivity for numerosities. In the course of development, nonverbal mental models allow for the exact representation of small quantities as well as changes in these quantities. Subitising, as the accurate recognition of small numerosities (without counting, plays an important role. It can be assumed that numerical concepts and procedures start with insights about small numerosities. Protoquantitative schemata comprise fundamental knowledge about quantities. One-to-one-correspondence connects elements and numbers, and, for this reason, both quantitative and numerical knowledge. If children understand that they can determine the numerosity of a collection of elements by enumerating the elements, they have acquired the concept of cardinality. Protoquantitative knowledge becomes quantitative if it can be applied to numerosities and sequential numbers. The concepts of cardinality and part-part-whole are key to numerical development. Developmentally appropriate learning and teaching should focus on cardinality and part-part-whole concepts.

  15. Analysis of numerical methods

    CERN Document Server

    Isaacson, Eugene

    1994-01-01

    This excellent text for advanced undergraduates and graduate students covers norms, numerical solution of linear systems and matrix factoring, iterative solutions of nonlinear equations, eigenvalues and eigenvectors, polynomial approximation, and other topics. It offers a careful analysis and stresses techniques for developing new methods, plus many examples and problems. 1966 edition.

  16. Paradoxes in numerical calculations

    Czech Academy of Sciences Publication Activity Database

    Brandts, J.; Křížek, Michal; Zhang, Z.

    2016-01-01

    Roč. 26, č. 3 (2016), s. 317-330 ISSN 1210-0552 R&D Projects: GA ČR GA14-02067S Institutional support: RVO:67985840 Keywords : round-off errors * numerical instability * recurrence formulae Subject RIV: BA - General Mathematics Impact factor: 0.394, year: 2016

  17. Inhibition of Ebola and Marburg Virus Entry by G Protein-Coupled Receptor Antagonists.

    Science.gov (United States)

    Cheng, Han; Lear-Rooney, Calli M; Johansen, Lisa; Varhegyi, Elizabeth; Chen, Zheng W; Olinger, Gene G; Rong, Lijun

    2015-10-01

    Filoviruses, consisting of Ebola virus (EBOV) and Marburg virus (MARV), are among the most lethal infectious threats to mankind. Infections by these viruses can cause severe hemorrhagic fevers in humans and nonhuman primates with high mortality rates. Since there is currently no vaccine or antiviral therapy approved for humans, there is an urgent need to develop prophylactic and therapeutic options for use during filoviral outbreaks and bioterrorist attacks. One of the ideal targets against filoviral infection and diseases is at the entry step, which is mediated by the filoviral glycoprotein (GP). In this report, we screened a chemical library of small molecules and identified numerous inhibitors, which are known G protein-coupled receptor (GPCR) antagonists targeting different GPCRs, including histamine receptors, 5-HT (serotonin) receptors, muscarinic acetylcholine receptor, and adrenergic receptor. These inhibitors can effectively block replication of both infectious EBOV and MARV, indicating a broad antiviral activity of the GPCR antagonists. The time-of-addition experiment and microscopic studies suggest that GPCR antagonists block filoviral entry at a step following the initial attachment but prior to viral/cell membrane fusion. These results strongly suggest that GPCRs play a critical role in filoviral entry and GPCR antagonists can be developed as an effective anti-EBOV/MARV therapy. Infection of Ebola virus and Marburg virus can cause severe illness in humans with a high mortality rate, and currently there is no FDA-approved vaccine or therapeutic treatment available. The 2013-2015 epidemic in West Africa underscores a lack of our understanding in the infection and pathogenesis of these viruses and the urgency of drug discovery and development. In this study, we have identified numerous inhibitors that are known G protein-coupled receptor (GPCR) antagonists targeting different GPCRs. These inhibitors can effectively block replication of both infectious

  18. Task Force report

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    The International Task Force on Prevention of Nuclear Terrorism was formed in 1985 under the auspices of the Nuclear Control Institute. This report is a consensus report of the 26 task force members - all members not necessarily agreeing on every point and all wordings, but in each case a substantial majority did agree. First, the report defines the threat, then establishes the priorities. Short-term recommendations are presented on: (1) protecting nuclear weapons; (2) protecting nuclear materials; (3) protecting nuclear facilities; (4) intelligence programs; (5) civil liberties concerns; (6) controlling nuclear transfers; (7) US - Soviet cooperation; (8) arms control initiatives; (9) convention of physical protection of nuclear material; (10) role of emergency management programs; and (11) role of the media. Brief long-term recommendations are included on (1) international measures, and (2) emerging nuclear technologies. An Appendix, Production of Nuclear Materials Usable in Weapons is presented for further consideration (without recommendations)

  19. Rostering and Task Scheduling

    DEFF Research Database (Denmark)

    Dohn, Anders Høeg

    . The rostering process is non-trivial and especially when service is required around the clock, rostering may involve considerable effort from a designated planner. Therefore, in order to minimize costs and overstaffing, to maximize the utilization of available staff, and to ensure a high level of satisfaction...... as possible to the available staff, while respecting various requirements and rules and while including possible transportation time between tasks. This thesis presents a number of industrial applications in rostering and task scheduling. The applications exist within various contexts in health care....... Mathematical and logic-based models are presented for the problems considered. Novel components are added to existing models and the modeling decisions are justified. In one case, the model is solved by a simple, but efficient greedy construction heuristic. In the remaining cases, column generation is applied...

  20. A Comparative Study of Task-based vs. Task- supported Teaching Approaches in an EFL Context

    Directory of Open Access Journals (Sweden)

    Mahdieh Shafipoor

    2015-09-01

    Full Text Available In spite of the numerous merits of task-based language instruction as claimed by its supporters in the last few decades, task-supported teaching approach as an alternative was introduced. Since then, there have been controversial debates over the superiority of each of these two approaches. Thus, in the current research project, the purpose was to consider these two teaching approaches in the scope of English language teaching, with the purpose of exploring the most efficient one in an Iranian EFL context. To this end, 120 sophomore students, majoring in English language translation course at Islamic Azad University, Shar-e-Qods branch were selected among 4 intact reading comprehension II classes. Next, they were divided into two experimental groups. The first experimental group received task-based instruction and for the second experimental group, task-trusted teaching approach was applied. The results of the data analyses turned out that task-trusted teaching approach was superior to task-based teaching in teaching reading to EFL learners.

  1. The task force process

    International Nuclear Information System (INIS)

    Applegate, J.S.

    1995-01-01

    This paper focuses on the unique aspects of the Fernald Citizens Task Force process that have contributed to a largely successful public participation effort at Fernald. The Fernald Citizens Task Force passed quickly by many procedural issues. Instead, the Task Force concentrated on (a) educating itself about the site, its problems, and possible solutions, and (b) choosing a directed way to approach its mandate: To make recommendations on several open-quotes big pictureclose quotes issues, including future use of the site, cleanup levels, waste disposition, and cleanup priorities. This paper presents the approach used at Fernald for establishing and running a focused site-specific advisory board, the key issues that have been faced, and how these issues were resolved. The success of Fernald in establishing a strong and functioning site-specific advisory board serves as a useful model for other DOE facilities, although the Fernald model is just one of many approaches that can be taken. However, the approach presented here has worked extremely well for Fernald

  2. Gap Task Force

    CERN Multimedia

    Lissuaer, D

    One of the more congested areas in the ATLAS detector is the GAP region (the area between the Barrel Calorimeter and the End Cap calorimeter) where Inner Detector services, LAr Services and some Tile services all must co-habitat in a very limited area. It has been clear for some time that the space in the GAP region is not sufficient to accommodate all that is needed. In the last few month additional problems of routing all the services to Z=0 have been encountered due to the very limited space between the Tile Calorimeter and the first layer of Muon chambers. The Technical Management Board (TMB) and the Executive Board (EB) decided in the middle of March to establish a Task Force to look at this problem and come up with a solution within well-specified guidelines. The task force consisted of experts from the ID, Muon, Liquid Argon and Tile systems in addition to experts from the Technical Coordination team and the Physics coordinator. The task force held many meetings and in general there were some very l...

  3. Mobile Thread Task Manager

    Science.gov (United States)

    Clement, Bradley J.; Estlin, Tara A.; Bornstein, Benjamin J.

    2013-01-01

    The Mobile Thread Task Manager (MTTM) is being applied to parallelizing existing flight software to understand the benefits and to develop new techniques and architectural concepts for adapting software to multicore architectures. It allocates and load-balances tasks for a group of threads that migrate across processors to improve cache performance. In order to balance-load across threads, the MTTM augments a basic map-reduce strategy to draw jobs from a global queue. In a multicore processor, memory may be "homed" to the cache of a specific processor and must be accessed from that processor. The MTTB architecture wraps access to data with thread management to move threads to the home processor for that data so that the computation follows the data in an attempt to avoid L2 cache misses. Cache homing is also handled by a memory manager that translates identifiers to processor IDs where the data will be homed (according to rules defined by the user). The user can also specify the number of threads and processors separately, which is important for tuning performance for different patterns of computation and memory access. MTTM efficiently processes tasks in parallel on a multiprocessor computer. It also provides an interface to make it easier to adapt existing software to a multiprocessor environment.

  4. LHCb computing tasks

    CERN Document Server

    Binko, P

    1998-01-01

    This document describes the computing tasks of the LHCb computing system. It also describes the logistics of the dataflow between the tasks and the detailed requirements for each task, in particular the data sizes and CPU power requirements. All data sizes are calculated assuming that the LHCb experiment will take data about 107 s per year at a frequency of 200 Hz, which gives 2 \\Theta 109 real events per year. The raw event size should not exceed 100 kB (200 TB per year). We will have to generate about 109 MonteCarlo events per year. The current MonteCarlo simulation program based on the GEANT3.21 package requires about 12 s to produce an average event (all CPU times are normalised to a 1000 MIPS processor). The size of an average MonteCarlo event will be about 200 kB (100 TB per year) of simulated data (without the hits). We will start to use the GEANT4 package in 1998. Rejection factors of 8 and 25 are required in the Level-2 and Level-3 triggers respectively, to reduce the frequency of events to 200 Hz. T...

  5. Task analysis and support for problem solving tasks

    International Nuclear Information System (INIS)

    Bainbridge, L.

    1987-01-01

    This paper is concerned with Task Analysis as the basis for ergonomic design to reduce human error rates, rather than for predicting human error rates. Task Analysis techniques usually provide a set of categories for describing sub tasks, and a framework describing the relations between sub-tasks. Both the task type categories and their organisation have implications for optimum interface and training design. In this paper, the framework needed for considering the most complex tasks faced by operators in process industries is discussed such as fault management in unexpected situations, and what is likely to minimise human error in these circumstances. (author)

  6. Intentional and Automatic Numerical Processing as Predictors of Mathematical Abilities in Primary School Children

    Directory of Open Access Journals (Sweden)

    Violeta ePina

    2015-03-01

    Full Text Available Previous studies have suggested that numerical processing relates to mathematical performance, but it seems that such relationship is more evident for intentional than for automatic numerical processing. In the present study we assessed the relationship between the two types of numerical processing and specific mathematical abilities in a sample of 109 children in grades 1 to 6. Participants were tested in an ample range of mathematical tests and also performed both a numerical and a size comparison task. The results showed that numerical processing related to mathematical performance only when inhibitory control was involved in the comparison tasks. Concretely, we found that intentional numerical processing, as indexed by the numerical distance effect in the numerical comparison task, was related to mathematical reasoning skills only when the task-irrelevant dimension (the physical size was incongruent; whereas automatic numerical processing, indexed by the congruency effect in the size comparison task, was related to mathematical calculation skills only when digits were separated by small distance. The observed double dissociation highlights the relevance of both intentional and automatic numerical processing in mathematical skills, but when inhibitory control is also involved.

  7. Effects of noise and task loading on a communication task loading on a communication task

    Science.gov (United States)

    Orrell, Dean H., II

    Previous research had shown the effect of noise on a single communication task. This research has been criticized as not being representative of a real world situation since subjects allocated all of their attention to only one task. In the present study, the effect of adding a loading task to a standard noise-communication paradigm was investigated. Subjects performed both a communication task (Modified Rhyme Test; House et al. 1965) and a short term memory task (Sternberg, 1969) in simulated levels of aircraft noise (95, 105 and 115 dB overall sound pressure level (OASPL)). Task loading was varied with Sternberg's task by requiring subjects to memorize one, four, or six alphanumeric characters. Simulated aircraft noise was varied between levels of 95, 105 and 115 dB OASPL using a pink noise source. Results show that the addition of Sternberg's task and little effect on the intelligibility of the communication task while response time for the communication task increased.

  8. Quality of data entry using single entry, double entry and automated forms processing--an example based on a study of patient-reported outcomes

    DEFF Research Database (Denmark)

    Paulsen, Aksel; Overgaard, Søren; Lauritsen, Jens Martin

    2012-01-01

    The clinical and scientific usage of patient-reported outcome measures is increasing in the health services. Often paper forms are used. Manual double entry of data is defined as the definitive gold standard for transferring data to an electronic format, but the process is laborious. Automated...

  9. The effects of the diurnal atmospheric variability on entry, descent and landing on Mars

    Directory of Open Access Journals (Sweden)

    Marčeta D.

    2014-01-01

    Full Text Available Landing on Mars is extremely challenging task due to the fact that the Martian atmosphere is the most hostile environment in the Solar system to perform the entry, descent and landing (EDL process, because it is thick enough to create substantial heating of the entry vehicle but not thick enough to reduce its velocity to the one necessary for safe landing. Beside this, the atmosphere is very dynamic mainly due to high eccentricity of the Martian orbit, obliquity of the orbital to the equatorial plane and close alignment of the winter solstice and the orbital perihelion. Although seasonal variations of atmospheric parameters are significantly larger than the diurnal, it is very important to analyze diurnal cycles as they can significantly change vertical and horizontal atmospheric profiles in very short time intervals. This can present a serious threat to missions which have very precise timings and specific requirements such as the requirement for the daytime landing to enable ground images acquisition during the descent and landing phase. A 3-degrees-of-freedom trajectory integration routine was combined with the Mars Global Reference Atmospheric Model (Mars-GRAM to identify the dependence of the EDL profiles on the diurnal cycles of atmospheric parameters throughout the Martian year. The obtained results show that the influence of the diurnal cycles is the largest at the equator and decreases relatively symmetrically towards the poles with a slightly stronger influence in the northern hemisphere. Also, there is a significant influence of the orbital position of Mars on the effect of diurnal atmospheric variations which causes that, around the orbital perihelion and winter solstice, there is some kind of inversion of the dependance of optimal entry timing on latitude of the landing site comparing to the rest of the Martian year. [Projekat Ministarstva nauke Republike Srbije, br. 176002

  10. When a Picasso is a "Picasso": the entry point in the identification of visual art.

    Science.gov (United States)

    Belke, B; Leder, H; Harsanyi, G; Carbon, C C

    2010-02-01

    We investigated whether art is distinguished from other real world objects in human cognition, in that art allows for a special memorial representation and identification based on artists' specific stylistic appearances. Testing art-experienced viewers, converging empirical evidence from three experiments, which have proved sensitive to addressing the question of initial object recognition, suggest that identification of visual art is at the subordinate level of the producing artist. Specifically, in a free naming task it was found that art-objects as opposed to non-art-objects were most frequently named with subordinate level categories, with the artist's name as the most frequent category (Experiment 1). In a category-verification task (Experiment 2), art-objects were recognized faster than non-art-objects on the subordinate level with the artist's name. In a conceptual priming task, subordinate primes of artists' names facilitated matching responses to art-objects but subordinate primes did not facilitate responses to non-art-objects (Experiment 3). Collectively, these results suggest that the artist's name has a special status in the memorial representation of visual art and serves as a predominant entry point in recognition in art perception. Copyright 2009 Elsevier B.V. All rights reserved.

  11. Improving laboratory data entry quality using Six Sigma.

    Science.gov (United States)

    Elbireer, Ali; Le Chasseur, Julie; Jackson, Brooks

    2013-01-01

    The Uganda Makerere University provides clinical laboratory support to over 70 clients in Uganda. With increased volume, manual data entry errors have steadily increased, prompting laboratory managers to employ the Six Sigma method to evaluate and reduce their problems. The purpose of this paper is to describe how laboratory data entry quality was improved by using Six Sigma. The Six Sigma Quality Improvement (QI) project team followed a sequence of steps, starting with defining project goals, measuring data entry errors to assess current performance, analyzing data and determining data-entry error root causes. Finally the team implemented changes and control measures to address the root causes and to maintain improvements. Establishing the Six Sigma project required considerable resources and maintaining the gains requires additional personnel time and dedicated resources. After initiating the Six Sigma project, there was a 60.5 percent reduction in data entry errors from 423 errors a month (i.e. 4.34 Six Sigma) in the first month, down to an average 166 errors/month (i.e. 4.65 Six Sigma) over 12 months. The team estimated the average cost of identifying and fixing a data entry error to be $16.25 per error. Thus, reducing errors by an average of 257 errors per month over one year has saved the laboratory an estimated $50,115 a year. The Six Sigma QI project provides a replicable framework for Ugandan laboratory staff and other resource-limited organizations to promote quality environment. Laboratory staff can deliver excellent care at a lower cost, by applying QI principles. This innovative QI method of reducing data entry errors in medical laboratories may improve the clinical workflow processes and make cost savings across the health care continuum.

  12. Neural stem cell-derived exosomes mediate viral entry

    Directory of Open Access Journals (Sweden)

    Sims B

    2014-10-01

    Full Text Available Brian Sims,1,2,* Linlin Gu,3,* Alexandre Krendelchtchikov,3 Qiana L Matthews3,4 1Division of Neonatology, Department of Pediatrics, 2Department of Cell, Developmental, and Integrative Biology, 3Division of Infectious Diseases, Department of Medicine, 4Center for AIDS Research, University of Alabama at Birmingham, Birmingham, AL, USA *These authors contributed equally to this work Background: Viruses enter host cells through interactions of viral ligands with cellular receptors. Viruses can also enter cells in a receptor-independent fashion. Mechanisms regarding the receptor-independent viral entry into cells have not been fully elucidated. Exosomal trafficking between cells may offer a mechanism by which viruses can enter cells.Methods: To investigate the role of exosomes on cellular viral entry, we employed neural stem cell-derived exosomes and adenovirus type 5 (Ad5 for the proof-of-principle study. Results: Exosomes significantly enhanced Ad5 entry in Coxsackie virus and adenovirus receptor (CAR-deficient cells, in which Ad5 only had very limited entry. The exosomes were shown to contain T-cell immunoglobulin mucin protein 4 (TIM-4, which binds phosphatidylserine. Treatment with anti-TIM-4 antibody significantly blocked the exosome-mediated Ad5 entry.Conclusion: Neural stem cell-derived exosomes mediated significant cellular entry of Ad5 in a receptor-independent fashion. This mediation may be hampered by an antibody specifically targeting TIM-4 on exosomes. This set of results will benefit further elucidation of virus/exosome pathways, which would contribute to reducing natural viral infection by developing therapeutic agents or vaccines. Keywords: neural stem cell-derived exosomes, adenovirus type 5, TIM-4, viral entry, phospholipids

  13. NUMERICAL AND ANALYTIC METHODS OF ESTIMATION BRIDGES’ CONSTRUCTIONS

    Directory of Open Access Journals (Sweden)

    Y. Y. Luchko

    2010-03-01

    Full Text Available In this article the numerical and analytical methods of calculation of the stressed-and-strained state of bridge constructions are considered. The task on increasing of reliability and accuracy of the numerical method and its solution by means of calculations in two bases are formulated. The analytical solution of the differential equation of deformation of a ferro-concrete plate under the action of local loads is also obtained.

  14. Numerical model CCC

    International Nuclear Information System (INIS)

    Bodvarsson, G.S.; Lippmann, M.J.

    1980-01-01

    The computer program CCC (conduction-convection-consolidation), developed at Lawrence Berkeley Laboratory, solves numerically the heat and mass flow equations for a fully saturated medium, and computes one-dimensional consolidation of the simulated systems. The model employs the Integrated Finite Difference Method (IFDM) in discretizing the saturated medium and formulating the governing equations. The sets of equations are solved either by an iterative solution technique (old version) or an efficient sparse solver (new version). The deformation of the medium is calculated using the one-dimensional consolidation theory of Terzaghi. In this paper, the numerical code is described, validation examples given and areas of application discussed. Several example problems involving flow through fractured media are also presented

  15. Numerical ecology with R

    CERN Document Server

    Borcard, Daniel; Legendre, Pierre

    2018-01-01

    This new edition of Numerical Ecology with R guides readers through an applied exploration of the major methods of multivariate data analysis, as seen through the eyes of three ecologists. It provides a bridge between a textbook of numerical ecology and the implementation of this discipline in the R language. The book begins by examining some exploratory approaches. It proceeds logically with the construction of the key building blocks of most methods, i.e. association measures and matrices, and then submits example data to three families of approaches: clustering, ordination and canonical ordination. The last two chapters make use of these methods to explore important and contemporary issues in ecology: the analysis of spatial structures and of community diversity. The aims of methods thus range from descriptive to explanatory and predictive and encompass a wide variety of approaches that should provide readers with an extensive toolbox that can address a wide palette of questions arising in contemporary mul...

  16. Numerical simulation in astrophysics

    International Nuclear Information System (INIS)

    Miyama, Shoken

    1985-01-01

    There have been many numerical simulations of hydrodynamical problems in astrophysics, e.g. processes of star formation, supernova explosion and formation of neutron stars, and general relativistic collapse of star to form black hole. The codes are made to be suitable for computing such problems. In astrophysical hydrodynamical problems, there are the characteristics: problems of self-gravity or external gravity acting, objects of scales very large or very short, objects changing by short period or long time scale, problems of magnetic force and/or centrifugal force acting. In this paper, we present one of methods of numerical simulations which may satisfy these requirements, so-called smoothed particle methods. We then introduce the methods briefly. Then, we show one of the applications of the methods to astrophysical problem (fragmentation and collapse of rotating isothermal cloud). (Mori, K.)

  17. Hybrid undulator numerical optimization

    Energy Technology Data Exchange (ETDEWEB)

    Hairetdinov, A.H. [Kurchatov Institute, Moscow (Russian Federation); Zukov, A.A. [Solid State Physics Institute, Chernogolovka (Russian Federation)

    1995-12-31

    3D properties of the hybrid undulator scheme arc studied numerically using PANDIRA code. It is shown that there exist two well defined sets of undulator parameters which provide either maximum on-axis field amplitude or minimal higher harmonics amplitude of the basic undulator field. Thus the alternative between higher field amplitude or pure sinusoidal field exists. The behavior of the undulator field amplitude and harmonics structure for a large set of (undulator gap)/(undulator wavelength) values is demonstrated.

  18. Comments on numerical simulations

    International Nuclear Information System (INIS)

    Sato, T.

    1984-01-01

    The author comments on a couple of things about numerical simulation. One is just about the philosophical discussion that is, spontaneous or driven. The other thing is the numerical or technical one. Frankly, the author didn't want to touch on the technical matter because this should be a common sense one for those who are working at numerical simulation. But since many people take numerical simulation results at their face value, he would like to remind you of the reality hidden behind them. First, he would point out that the meaning of ''driven'' in driven reconnection is different from that defined by Schindler or Akasofu. The author's definition is closer to Axford's definition. In the spontaneous case, for some unpredicted reason an excess energy of the system is suddenly released at a certain point. However, one does not answer how such an unstable state far beyond a stable limit is realized in the magnetotail. In the driven case, there is a definite energy buildup phase starting from a stable state; namely, energy in the black box increases from a stable level subject to an external source. When the state has reached a certain position, the energy is released suddenly. The difference between driven and spontaneous is whether the cause (plasma flow) to trigger reconnection is specified or reconnection is triggered unpredictably. Another difference is that in driven reconnection the reconnection rate is dependent on the speed of the external plasma flow, but in spontaneous reconnection the rate is dependent on the internal condition such as the resistivity

  19. Numerical simulation of plasmas

    International Nuclear Information System (INIS)

    Dnestrovskii, Y.N.; Kostomarov, D.P.

    1986-01-01

    This book contains a modern consistent and systematic presentation of numerical computer simulation of plasmas in controlled thermonuclear fusion. The authors focus on the Soviet research in mathematical modelling of Tokamak plasmas, and present kinetic hydrodynamic and transport models with special emphasis on the more recent hybrid models. Compared with the first edition (in Russian) this book has been greatly revised and updated. (orig./WL)

  20. Numerical analysis II essentials

    CERN Document Server

    REA, The Editors of; Staff of Research Education Association

    1989-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Numerical Analysis II covers simultaneous linear systems and matrix methods, differential equations, Fourier transformations, partial differential equations, and Monte Carlo methods.

  1. Handbook of numerical analysis

    CERN Document Server

    Ciarlet, Philippe G

    Mathematical finance is a prolific scientific domain in which there exists a particular characteristic of developing both advanced theories and practical techniques simultaneously. Mathematical Modelling and Numerical Methods in Finance addresses the three most important aspects in the field: mathematical models, computational methods, and applications, and provides a solid overview of major new ideas and results in the three domains. Coverage of all aspects of quantitative finance including models, computational methods and applications Provides an overview of new ideas an

  2. The task-to-task communication between computers

    International Nuclear Information System (INIS)

    Lin Shuzi; Zhang Bingyun; Zhao Weiren

    1992-01-01

    The task-to-task communication is used in the Institute of High Energy Physics. The BES (Beijing Spectrometer) uses the communication mode to take some of the BEPC (Beijing Electron Positron Collider) running parameters needed by BES experiments in a periodic time. The authors describe the principle of transparent task-to-task communication and how to use it in BES on-line data acquisition system

  3. Characterizing Functional Domains for TIM-Mediated Enveloped Virus Entry

    Science.gov (United States)

    Moller-Tank, Sven; Albritton, Lorraine M.; Rennert, Paul D.

    2014-01-01

    ABSTRACT T-cell immunoglobulin and mucin domain 1 (TIM-1) and other TIM family members were recently identified as phosphatidylserine (PtdSer)-mediated virus entry-enhancing receptors (PVEERs). These proteins enhance entry of Ebola virus (EBOV) and other viruses by binding PtdSer on the viral envelope, concentrating virus on the cell surface, and promoting subsequent internalization. The PtdSer-binding activity of the immunoglobulin-like variable (IgV) domain is essential for both virus binding and internalization by TIM-1. However, TIM-3, whose IgV domain also binds PtdSer, does not effectively enhance virus entry, indicating that other domains of TIM proteins are functionally important. Here, we investigate the domains supporting enhancement of enveloped virus entry, thereby defining the features necessary for a functional PVEER. Using a variety of chimeras and deletion mutants, we found that in addition to a functional PtdSer-binding domain PVEERs require a stalk domain of sufficient length, containing sequences that promote an extended structure. Neither the cytoplasmic nor the transmembrane domain of TIM-1 is essential for enhancing virus entry, provided the protein is still plasma membrane bound. Based on these defined characteristics, we generated a mimic lacking TIM sequences and composed of annexin V, the mucin-like domain of α-dystroglycan, and a glycophosphatidylinositol anchor that functioned as a PVEER to enhance transduction of virions displaying Ebola, Chikungunya, Ross River, or Sindbis virus glycoproteins. This identification of the key features necessary for PtdSer-mediated enhancement of virus entry provides a basis for more effective recognition of unknown PVEERs. IMPORTANCE T-cell immunoglobulin and mucin domain 1 (TIM-1) and other TIM family members are recently identified phosphatidylserine (PtdSer)-mediated virus entry-enhancing receptors (PVEERs). These proteins enhance virus entry by binding the phospholipid, PtdSer, present on the viral

  4. Advanced entry guidance algorithm with landing footprint computation

    Science.gov (United States)

    Leavitt, James Aaron

    The design and performance evaluation of an entry guidance algorithm for future space transportation vehicles is presented. The algorithm performs two functions: on-board trajectory planning and trajectory tracking. The planned longitudinal path is followed by tracking drag acceleration, as is done by the Space Shuttle entry guidance. Unlike the Shuttle entry guidance, lateral path curvature is also planned and followed. A new trajectory planning function for the guidance algorithm is developed that is suitable for suborbital entry and that significantly enhances the overall performance of the algorithm for both orbital and suborbital entry. In comparison with the previous trajectory planner, the new planner produces trajectories that are easier to track, especially near the upper and lower drag boundaries and for suborbital entry. The new planner accomplishes this by matching the vehicle's initial flight path angle and bank angle, and by enforcing the full three-degree-of-freedom equations of motion with control derivative limits. Insights gained from trajectory optimization results contribute to the design of the new planner, giving it near-optimal downrange and crossrange capabilities. Planned trajectories and guidance simulation results are presented that demonstrate the improved performance. Based on the new planner, a method is developed for approximating the landing footprint for entry vehicles in near real-time, as would be needed for an on-board flight management system. The boundary of the footprint is constructed from the endpoints of extreme downrange and crossrange trajectories generated by the new trajectory planner. The footprint algorithm inherently possesses many of the qualities of the new planner, including quick execution, the ability to accurately approximate the vehicle's glide capabilities, and applicability to a wide range of entry conditions. Footprints can be generated for orbital and suborbital entry conditions using a pre

  5. Children's Task Engagement during Challenging Puzzle Tasks

    Science.gov (United States)

    Wang, Feihong; Algina, James; Snyder, Patricia; Cox, Martha

    2017-01-01

    We examined children's task engagement during a challenging puzzle task in the presence of their primary caregivers by using a representative sample of rural children from six high-poverty counties across two states. Weighted longitudinal confirmatory factor analysis and structural equation modeling were used to identify a task engagement factor…

  6. Structural and mechanistic studies of measles virus illuminate paramyxovirus entry.

    Directory of Open Access Journals (Sweden)

    Richard K Plemper

    2011-06-01

    Full Text Available Measles virus (MeV, a member of the paramyxovirus family of enveloped RNA viruses and one of the most infectious viral pathogens identified, accounts for major pediatric morbidity and mortality worldwide although coordinated efforts to achieve global measles control are in place. Target cell entry is mediated by two viral envelope glycoproteins, the attachment (H and fusion (F proteins, which form a complex that achieves merger of the envelope with target cell membranes. Despite continually expanding knowledge of the entry strategies employed by enveloped viruses, our molecular insight into the organization of functional paramyxovirus fusion complexes and the mechanisms by which the receptor binding by the attachment protein triggers the required conformational rearrangements of the fusion protein remain incomplete. Recently reported crystal structures of the MeV attachment protein in complex with its cellular receptors CD46 or SLAM and newly developed functional assays have now illuminated some of the fundamental principles that govern cell entry by this archetype member of the paramyxovirus family. Here, we review these advances in our molecular understanding of MeV entry in the context of diverse entry strategies employed by other members of the paramyxovirus family.

  7. Trading Robustness Requirements in Mars Entry Trajectory Design

    Science.gov (United States)

    Lafleur, Jarret M.

    2009-01-01

    One of the most important metrics characterizing an atmospheric entry trajectory in preliminary design is the size of its predicted landing ellipse. Often, requirements for this ellipse are set early in design and significantly influence both the expected scientific return from a particular mission and the cost of development. Requirements typically specify a certain probability level (6-level) for the prescribed ellipse, and frequently this latter requirement is taken at 36. However, searches for the justification of 36 as a robustness requirement suggest it is an empirical rule of thumb borrowed from non-aerospace fields. This paper presents an investigation into the sensitivity of trajectory performance to varying robustness (6-level) requirements. The treatment of robustness as a distinct objective is discussed, and an analysis framework is presented involving the manipulation of design variables to effect trades between performance and robustness objectives. The scenario for which this method is illustrated is the ballistic entry of an MSL-class Mars entry vehicle. Here, the design variable is entry flight path angle, and objectives are parachute deploy altitude performance and error ellipse robustness. Resulting plots show the sensitivities between these objectives and trends in the entry flight path angles required to design to these objectives. Relevance to the trajectory designer is discussed, as are potential steps for further development and use of this type of analysis.

  8. BST2/Tetherin enhances entry of human cytomegalovirus.

    Directory of Open Access Journals (Sweden)

    Kasinath Viswanathan

    2011-11-01

    Full Text Available Interferon-induced BST2/Tetherin prevents budding of vpu-deficient HIV-1 by tethering mature viral particles to the plasma membrane. BST2 also inhibits release of other enveloped viruses including Ebola virus and Kaposi's sarcoma associated herpesvirus (KSHV, indicating that BST2 is a broadly acting antiviral host protein. Unexpectedly however, recovery of human cytomegalovirus (HCMV from supernatants of BST2-expressing human fibroblasts was increased rather than decreased. Furthermore, BST2 seemed to enhance viral entry into cells since more virion proteins were released into BST2-expressing cells and subsequent viral gene expression was elevated. A significant increase in viral entry was also observed upon induction of endogenous BST2 during differentiation of the pro-monocytic cell line THP-1. Moreover, treatment of primary human monocytes with siRNA to BST2 reduced HCMV infection, suggesting that BST2 facilitates entry of HCMV into cells expressing high levels of BST2 either constitutively or in response to exogenous stimuli. Since BST2 is present in HCMV particles we propose that HCMV entry is enhanced via a reverse-tethering mechanism with BST2 in the viral envelope interacting with BST2 in the target cell membrane. Our data suggest that HCMV not only counteracts the well-established function of BST2 as inhibitor of viral egress but also employs this anti-viral protein to gain entry into BST2-expressing hematopoietic cells, a process that might play a role in hematogenous dissemination of HCMV.

  9. Dopamine receptor activation increases HIV entry into primary human macrophages.

    Directory of Open Access Journals (Sweden)

    Peter J Gaskill

    Full Text Available Macrophages are the primary cell type infected with HIV in the central nervous system, and infection of these cells is a major component in the development of neuropathogenesis and HIV-associated neurocognitive disorders. Within the brains of drug abusers, macrophages are exposed to increased levels of dopamine, a neurotransmitter that mediates the addictive and reinforcing effects of drugs of abuse such as cocaine and methamphetamine. In this study we examined the effects of dopamine on HIV entry into primary human macrophages. Exposure to dopamine during infection increased the entry of R5 tropic HIV into macrophages, irrespective of the concentration of the viral inoculum. The entry pathway affected was CCR5 dependent, as antagonizing CCR5 with the small molecule inhibitor TAK779 completely blocked entry. The effect was dose-dependent and had a steep threshold, only occurring above 108 M dopamine. The dopamine-mediated increase in entry required dopamine receptor activation, as it was abrogated by the pan-dopamine receptor antagonist flupenthixol, and could be mediated through both subtypes of dopamine receptors. These findings indicate that the effects of dopamine on macrophages may have a significant impact on HIV pathogenesis. They also suggest that drug-induced increases in CNS dopamine may be a common mechanism by which drugs of abuse with distinct modes of action exacerbate neuroinflammation and contribute to HIV-associated neurocognitive disorders in infected drug abusers.

  10. Bovine parvovirus uses clathrin-mediated endocytosis for cell entry.

    Science.gov (United States)

    Dudleenamjil, Enkhmart; Lin, Chin-Yo; Dredge, Devin; Murray, Byron K; Robison, Richard A; Johnson, F Brent

    2010-12-01

    Entry events of bovine parvovirus (BPV) were studied. Transmission electron micrographs of infected cells showed virus particles in cytoplasmic vesicles. Chemical inhibitors that block certain aspects of the cellular machinery were employed to assess viral dependency upon those cellular processes. Chlorpromazine, ammonium chloride, chloroquine and bafilamicin A1 were used to inhibit acidification of endosomes and clathrin-associated endocytosis. Nystatin was used as an inhibitor of the caveolae pathway. Cytochalasin D and ML-7 were used to inhibit actin and myosin functions, respectively. Nocodazole and colchicine were employed to inhibit microtubule activity. Virus entry was assessed by measuring viral transcription using real-time PCR, synthesis of capsid protein and assembly of infectious progeny virus in the presence of inhibitor blockage. The results indicated that BPV entry into embryonic bovine trachael cells utilizes endocytosis in clathrin-coated vesicles, is dependent upon acidification, and appears to be associated with actin and microtubule dependency. Evidence for viral entry through caveolae was not obtained. These findings provide a fuller understanding of the early cell-entry events of the replication cycle for members of the genus Bocavirus.

  11. Dopamine Receptor Activation Increases HIV Entry into Primary Human Macrophages

    Science.gov (United States)

    Gaskill, Peter J.; Yano, Hideaki H.; Kalpana, Ganjam V.; Javitch, Jonathan A.; Berman, Joan W.

    2014-01-01

    Macrophages are the primary cell type infected with HIV in the central nervous system, and infection of these cells is a major component in the development of neuropathogenesis and HIV-associated neurocognitive disorders. Within the brains of drug abusers, macrophages are exposed to increased levels of dopamine, a neurotransmitter that mediates the addictive and reinforcing effects of drugs of abuse such as cocaine and methamphetamine. In this study we examined the effects of dopamine on HIV entry into primary human macrophages. Exposure to dopamine during infection increased the entry of R5 tropic HIV into macrophages, irrespective of the concentration of the viral inoculum. The entry pathway affected was CCR5 dependent, as antagonizing CCR5 with the small molecule inhibitor TAK779 completely blocked entry. The effect was dose-dependent and had a steep threshold, only occurring above 108 M dopamine. The dopamine-mediated increase in entry required dopamine receptor activation, as it was abrogated by the pan-dopamine receptor antagonist flupenthixol, and could be mediated through both subtypes of dopamine receptors. These findings indicate that the effects of dopamine on macrophages may have a significant impact on HIV pathogenesis. They also suggest that drug-induced increases in CNS dopamine may be a common mechanism by which drugs of abuse with distinct modes of action exacerbate neuroinflammation and contribute to HIV-associated neurocognitive disorders in infected drug abusers. PMID:25268786

  12. Soft Roof Failure Mechanism and Supporting Method for Gob-Side Entry Retaining

    Directory of Open Access Journals (Sweden)

    Hongyun Yang

    2015-10-01

    Full Text Available To study the soft roof failure mechanism and the supporting method for a gateway in a gently inclined coal seam with a dip angle of 16° kept for gob-side entry retaining, and through the methodology of field investigation and numerical and analytical modeling, this paper analyzed the stress evolution law of roof strata at the working face end and determined that the sharp horizontal stress unloading phenomenon along the coal wall side did not appear after the working face advanced. Conversely, the horizontal stress along the gob side instantly decreased and the tensile stress produced, and the vertical stress in the central part of the roof had a higher reduction magnitude as well. An in-depth study indicates that the soft roof of the working face end subsided and seriously separated due to the effect of the front abutment pressure and the roof hanging length above the gob line, as well as certain other factors, including the rapid unloading of the lateral stress, tension and shear on the lower roof rock layer and dynamic disturbance. Those influencing factors also led to rapid crack propagation on a large scale and serious fracturing in the soft roof of the working face end. However, in the gob stress stabilized zone, the soft roof in the gob-side entry retaining has a shearing failure along the filling wall inside affected by the overburden pressure, rock bulking pressure, and roof gravity. To maintain the roof integrity, decrease the roof deformation, and enable the control of the working face end soft roof and the stabilization of the gob-side entry retaining roof, this study suggests that the preferred bolt installation angle for the soft roof situation is 70° based on the rock bolt extrusion strengthening theory.

  13. Toward resolving model-measurement discrepancies of radon entry into houses

    International Nuclear Information System (INIS)

    Garbesi, K.; Lawrence Berkeley Lab., CA

    1994-10-01

    Analysis of the literature indicated that radon transport models significantly and consistently underpredict the advective entry into houses of soil-gas borne radon. Advective entry is the dominant mechanism resulting in high concentrations of radon indoors. The author investigated the source of the model-measurement discrepancy via carefully controlled field experiments conducted at an experimental basement located in natural soil in Ben Lomond, California. Early experiments at the structure confirmed the existence and magnitude of the model-measurement discrepancy, ensuring that it was not merely an artifact of inherently complex and poorly understood field sites. The measured soil-gas entry rate during structure depressurization was found to be an order of magnitude larger than predicted by a current three-dimensional numerical model of radon transport. The exact magnitude of the discrepancy depends on whether the arithmetic or geometric mean of the small-scale measurements of permeability is used to estimate the effective permeability of the soil. This factor is a critical empirical input to the model and was determined for the Ben Lomond site in the typical fashion using single-probe static depressurization measurements at multiple locations. The remainder of the dissertation research tests a hypothesis to explain the observed discrepancy: that soil permeability assessed using relatively small-scale probe measurements does not reflect bulk soil permeability for flows that is likely to occur at larger scales of several meters or more in real houses and in the test structure. The idea is that soil heterogeneity is of a nature that, as flows occur over larger scales, larger scales of heterogeneity are encountered that facilitate larger flux rates, resulting in a scale dependence of effective soil permeability

  14. Numerical estimation in individuals with Down syndrome.

    Science.gov (United States)

    Lanfranchi, Silvia; Berteletti, Ilaria; Torrisi, Erika; Vianello, Renzo; Zorzi, Marco

    2014-10-31

    We investigated numerical estimation in children with Down syndrome (DS) in order to assess whether their pattern of performance is tied to experience (age), overall cognitive level, or specifically impaired. Siegler and Opfer's (2003) number to position task, which requires translating a number into a spatial position on a number line, was administered to a group of 21 children with DS and to two control groups of typically developing children (TD), matched for mental and chronological age. Results suggest that numerical estimation and the developmental transition between logarithm and linear patterns of estimates in children with DS is more similar to that of children with the same mental age than to children with the same chronological age. Moreover linearity was related to the cognitive level in DS while in TD children it was related to the experience level. Copyright © 2014. Published by Elsevier Ltd.

  15. Blink activity and task difficulty.

    Science.gov (United States)

    Tanaka, Y; Yamaoka, K

    1993-08-01

    This study investigated the relationship between task difficulty and blink activity, which includes blink rate, blink amplitude, and blink duration. Two kinds of tasks established two levels of difficulty. In Exp. 1, a mental arithmetic task was used to examine the relationship. Analysis showed that blink rate for a difficult task was significantly higher than that for an easier one. In Exp. 2, a letter-search task (hiragana Japanese alphabet) was used while the other conditions were the same as those in Exp. 1; however, the results of this experiment were not influenced by the difficulty of the task. As results indicate that blink rate is related to not only difficulty but also the nature of the task, the nature of the task is probably dependent on a mechanism in information processing. The results for blink amplitude and blink duration showed no systematic change during either experiment.

  16. Biology task group

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The accomplishments of the task group studies over the past year are reviewed. The purposes of biological investigations, in the context of subseabed disposal, are: an evaluation of the dose to man; an estimation of effects on the ecosystem; and an estimation of the influence of organisms on and as barriers to radionuclide migration. To accomplish these ends, the task group adopted the following research goals: (1) acquire more data on biological accumulation of specific radionuclides, such as those of Tc, Np, Ra, and Sr; (2) acquire more data on transfer coefficients from sediment to organism; (3) Calculate mass transfer rates, construct simple models using them, and estimate collective dose commitment; (4) Identify specific pathways or transfer routes, determine the rates of transfer, and make dose limit calculations with simple models; (5) Calculate dose rates to and estimate irradiation effects on the biota as a result of waste emplacement, by reference to background irradiation calculations. (6) Examine the effect of the biota on altering sediment/water radionuclide exchange; (7) Consider the biological data required to address different accident scenarios; (8) Continue to provide the basic biological information for all of the above, and ensure that the system analysis model is based on the most realistic and up-to-date concepts of marine biologists; and (9) Ensure by way of free exchange of information that the data used in any model are the best currently available

  17. Space in Numerical and Ordinal Information: A Common Construct?

    Directory of Open Access Journals (Sweden)

    Philipp Alexander Schroeder

    2017-12-01

    Full Text Available Space is markedly involved in numerical processing, both explicitly in instrumental learning and implicitly in mental operations on numbers. Besides action decisions, action generations, and attention, the response-related effect of numerical magnitude or ordinality on space is well documented in the Spatial-Numerical Associations of Response Codes (SNARC effect. Here, right- over left-hand responses become relatively faster with increasing magnitude positions. However, SNARC-like behavioral signatures in non-numerical tasks with ordinal information were also observed and inspired new models integrating seemingly spatial effects of ordinal and numerical metrics. To examine this issue further, we report a comparison between numerical SNARC and ordinal SNARC-like effects to investigate group-level characteristics and individual-level deductions from generalized views, i.e., convergent validity. Participants solved order-relevant (before/after classification and order-irrelevant tasks (font color classification with numerical stimuli 1-5, comprising both magnitude and order information, and with weekday stimuli, comprising only ordinal information. A small correlation between magnitude- and order-related SNARCs was observed, but effects are not pronounced in order-irrelevant color judgments. On the group level, order-relevant spatial-numerical associations were best accounted for by a linear magnitude predictor, whereas the SNARC effect for weekdays was categorical. Limited by the representativeness of these tasks and analyses, results are inconsistent with a single amodal cognitive mechanism that activates space in mental processing of cardinal and ordinal information alike. A possible resolution to maintain a generalized view is proposed by discriminating different spatial activations, possibly mediated by visuospatial and verbal working memory, and by relating results to findings from embodied numerical cognition.

  18. Entry into the electricity market: Uncertainty, competition, and mothballing options

    Energy Technology Data Exchange (ETDEWEB)

    Takashima, Ryuta [Department of Nuclear Engineering and Management, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)], E-mail: takashima@n.t.u-tokyo.ac.jp; Goto, Makoto [Department of Industrial and Management Systems Engineering, Waseda University, 3-4-1 Okubo, Shinjyuku-ku, Tokyo 169-8555 (Japan); Kimura, Hiroshi; Madarame, Haruki [Nuclear Professional School, University of Tokyo, 2-22 Shirane, Shirakata, Tokai-mura, Naka-Gun, Ibaraki-ken 319-1188 (Japan)

    2008-07-15

    The present paper analyzes the entry strategies into the electricity market of two firms that have power plants under price uncertainty and competition. We consider the symmetric and asymmetric two firms, which have either a thermal power plant or a nuclear power plant. The differences between the thermal power plant and the nuclear power plant, such as the cost structure and operational flexibility are modeled. The threshold values of market entry are calculated for each firm with either the thermal power plant or the nuclear power plant as the leader or the follower. We show the dependence of cost structures on entry thresholds of the leader and the follower into the electricity market. For various market and cost conditions, the diagrams of the leader are also shown.

  19. Entry into the electricity market: Uncertainty, competition, and mothballing options

    International Nuclear Information System (INIS)

    Takashima, Ryuta; Goto, Makoto; Kimura, Hiroshi; Madarame, Haruki

    2008-01-01

    The present paper analyzes the entry strategies into the electricity market of two firms that have power plants under price uncertainty and competition. We consider the symmetric and asymmetric two firms, which have either a thermal power plant or a nuclear power plant. The differences between the thermal power plant and the nuclear power plant, such as the cost structure and operational flexibility are modeled. The threshold values of market entry are calculated for each firm with either the thermal power plant or the nuclear power plant as the leader or the follower. We show the dependence of cost structures on entry thresholds of the leader and the follower into the electricity market. For various market and cost conditions, the diagrams of the leader are also shown

  20. Mars Science Laboratory Entry Guidance Improvements for Mars 2018 (DRAFT)

    Science.gov (United States)

    Garcia-Llama, Eduardo; Winski, Richard G.; Shidner, Jeremy D.; Ivanov, Mark C.; Grover, Myron R.; Prakash, Ravi

    2011-01-01

    In 2011, the Mars Science Laboratory (MSL) will be launched in a mission to deliver the largest and most capable rover to date to the surface of Mars. A follow on MSL-derived mission, referred to as Mars 2018, is planned for 2018. Mars 2018 goals include performance enhancements of the Entry, Descent and Landing over that of its predecessor MSL mission of 2011. This paper will discuss the main elements of the modified 2018 EDL preliminary design that will increase performance on the entry phase of the mission. In particular, these elements will increase the parachute deploy altitude to allow for more time margin during the subsequent descent and landing phases and reduce the delivery ellipse size at parachute deploy through modifications in the entry reference trajectory design, guidance trigger logic design, and the effect of additional navigation hardware.

  1. Soil and gas and radon entry potentials for substructure surfaces

    International Nuclear Information System (INIS)

    Harrison, J.; Sextro, R.G.

    1990-01-01

    This paper reports on measurement techniques and parameters that describe the potential for areas of a building substructure to have high soil gas and radon entry rates which have been developed. Flows and pressures measured at test holes in substructure surfaces while the substructure was intentionally depressurized were used in a highly simplified electrical circuit to model the substructure/soil network. Data from four New Jersey houses indicate that the soil was a factor of two to six times more resistant to soil gas flow than substructure surfaces, concrete slab floors, including perimeter gaps, cracks, and other penetrations, were approximately five times more resistant to soil gas movement than hollow block walls, and radon entry potentials were highest for slab floors. These indices of entry potential may be useful for characterizing the relative leakiness of below-grade substructure surfaces and for determining the selection and placement of radon control systems

  2. Towards a Market Entry Framework for Digital Payment Platforms

    DEFF Research Database (Denmark)

    Kazan, Erol; Damsgaard, Jan

    2016-01-01

    This study presents a framework to understand and explain the design and configuration of digital payment platforms and how these platforms create conditions for market entries. By embracing the theoretical lens of platform envelopment, we employed a multiple and comparative-case study...... in a European setting by using our framework as an analytical lens to assess market-entry conditions. We found that digital payment platforms have acquired market entry capabilities, which is achieved through strategic platform design (i.e., platform development and service distribution) and technology design...... (i.e., issuing evolutionary and revolutionary payment instruments). The studied cases reveal that digital platforms leverage payment services as a mean to bridge and converge core and adjacent platform markets. In so doing, platform envelopment strengthens firms’ market position in their respective...

  3. Entry and Exit Dynamics of Nascent Business Owners

    DEFF Research Database (Denmark)

    Rocha, Vera; Carneiro, Anabela; Varum, Celeste

    2015-01-01

    results suggest that different exit modes can be predicted by business owners’ entry route. Furthermore, different exit modes exhibit different duration dependence patterns according to the entry mode. Additionally, the paper shows that businesses started after a displacement episode are not necessarily......This paper reports a comprehensive study on the dynamics of nascent business owners using a unique longitudinal matched employer–employee dataset. We follow over 157,000 individuals who leave paid employment and become business owners during the period 1992–2007. The contributions of this paper...... are twofold. First, we analyze both entry and exit, identifying and characterizing different profiles of individuals leaving paid employment to become business owners, and distinguishing exits by dissolution from exits by ownership transfer. Second, we provide new evidence on how particular experiences...

  4. RITD - Adapting Mars Entry, Descent and Landing System for Earth

    Science.gov (United States)

    Haukka, H.; Heilimo, J.; Harri, A.-M.; Aleksashkin, S.; Koryanov, V.; Arruego, I.; Schmidt, W.; Finchenko, V.; Martynov, M.; Ponomarenko, A.; Kazakovtsev, V.; Martin, S.

    2015-10-01

    We have developed an atmospheric re-entry and descent system concept based on inflatable hypersonic decelerator techniques that were originally developed for Mars. The ultimate goal of this EU-funded RITD-project (Re-entry: Inflatable Technology Development) was to assess the benefits of this technology when deploying small payloads from low Earth orbits to the surface of the Earth with modest costs. The principal goal was to assess and develop a preliminary EDLS design for the entire relevant range of aerodynamic regimes expected to be encountered in Earth's atmosphere during entry, descent and landing. Low Earth Orbit (LEO) and even Lunar applications envisaged include the use of the EDLS approach in returning payloads of 4-8 kg down to the surface.

  5. Newcomer innovation during entry in a changing organization

    DEFF Research Database (Denmark)

    Revsbæk, Line

    ” of the organizational culture. Although acknowledging that organizational socialization is about continuity and change in the employing organization (Van Maanen & Schein, 1979), and realizing that the entry of newcomers holds the potential for innovation to the employing organization (Feldman, 2012), the discourse...... values and beliefs” (Feldman, 2012:215). Thus, the “workgroup”, “work processes”, “patterns of social interaction” and “core values” are considered stable units of analysis, which entries of organizational newcomers might affect. This gives rise to a dichotomy of newcomer assimilation versus...... organizational accommodation to organize much of the research on organizational socialization and innovation. The case study presented in this paper investigates organizational entry in a changing organization raising the question of how to understand organizational socialization and newcomer innovation when...

  6. Guidance and Control Algorithms for the Mars Entry, Descent and Landing Systems Analysis

    Science.gov (United States)

    Davis, Jody L.; CwyerCianciolo, Alicia M.; Powell, Richard W.; Shidner, Jeremy D.; Garcia-Llama, Eduardo

    2010-01-01

    The purpose of the Mars Entry, Descent and Landing Systems Analysis (EDL-SA) study was to identify feasible technologies that will enable human exploration of Mars, specifically to deliver large payloads to the Martian surface. This paper focuses on the methods used to guide and control two of the contending technologies, a mid- lift-to-drag (L/D) rigid aeroshell and a hypersonic inflatable aerodynamic decelerator (HIAD), through the entry portion of the trajectory. The Program to Optimize Simulated Trajectories II (POST2) is used to simulate and analyze the trajectories of the contending technologies and guidance and control algorithms. Three guidance algorithms are discussed in this paper: EDL theoretical guidance, Numerical Predictor-Corrector (NPC) guidance and Analytical Predictor-Corrector (APC) guidance. EDL-SA also considered two forms of control: bank angle control, similar to that used by Apollo and the Space Shuttle, and a center-of-gravity (CG) offset control. This paper presents the performance comparison of these guidance algorithms and summarizes the results as they impact the technology recommendations for future study.

  7. Optometry Australia Entry-level Competency Standards for Optometry 2014.

    Science.gov (United States)

    Kiely, Patricia M; Slater, Jared

    2015-01-01

    Competency standards for entry-level to the profession of optometry in Australia were first developed in 1993, revised in 1997 and 2000, and again in 2008, when therapeutic competency standards were introduced but differentiated from the entry-level competencies. Therapeutic competencies were an additional requirement for the purpose of endorsing optometric registration to allow prescription of medicines for conditions of the eye. Recent changes to educational and registration requirements mean that therapeutic competencies are now required at entry-level. To address this and to ensure the standards reflect current best practice, a full revision of the standards was undertaken. A steering committee oversaw the review of the standards, which involved a literature review, workshops with optometrists and broad consultation with stakeholders, including the Optometry Board of Australia, individual optometrists and employers of optometrists, to identify changes needed. Representatives of the profession from Australia and New Zealand and from academia in Australia were involved. A modified document based on the feedback received was circulated to the State Divisions and the National Board of the then Optometrists Association Australia. The updated standards reflect the state of entry to the optometric profession in 2014; competencies for prescribing of scheduled medicines are included, new material has been added, other areas have been modified. The updated entry-level competency standards were adopted on behalf of the profession by the National Board of the then Optometrists Association Australia in March 2014. Competency standards have been updated so that they continue to be current and useful for the profession, individual optometrists and Australian and New Zealand registration authorities for the purposes of accreditation of optometric programs and assessment of overseas-trained optometrists. This paper details the revision process and presents the 2014 version of

  8. The role of digital data entry in participatory environmental monitoring.

    Science.gov (United States)

    Brammer, Jeremy R; Brunet, Nicolas D; Burton, A Cole; Cuerrier, Alain; Danielsen, Finn; Dewan, Kanwaljeet; Herrmann, Thora Martina; Jackson, Micha V; Kennett, Rod; Larocque, Guillaume; Mulrennan, Monica; Pratihast, Arun Kumar; Saint-Arnaud, Marie; Scott, Colin; Humphries, Murray M

    2016-12-01

    Many argue that monitoring conducted exclusively by scientists is insufficient to address ongoing environmental challenges. One solution entails the use of mobile digital devices in participatory monitoring (PM) programs. But how digital data entry affects programs with varying levels of stakeholder participation, from nonscientists collecting field data to nonscientists administering every step of a monitoring program, remains unclear. We reviewed the successes, in terms of management interventions and sustainability, of 107 monitoring programs described in the literature (hereafter programs) and compared these with case studies from our PM experiences in Australia, Canada, Ethiopia, Ghana, Greenland, and Vietnam (hereafter cases). Our literature review showed that participatory programs were less likely to use digital devices, and 2 of our 3 more participatory cases were also slow to adopt digital data entry. Programs that were participatory and used digital devices were more likely to report management actions, which was consistent with cases in Ethiopia, Greenland, and Australia. Programs engaging volunteers were more frequently reported as ongoing, but those involving digital data entry were less often sustained when data collectors were volunteers. For the Vietnamese and Canadian cases, sustainability was undermined by a mismatch in stakeholder objectives. In the Ghanaian case, complex field protocols diminished monitoring sustainability. Innovative technologies attract interest, but the foundation of effective participatory adaptive monitoring depends more on collaboratively defined questions, objectives, conceptual models, and monitoring approaches. When this foundation is built through effective partnerships, digital data entry can enable the collection of more data of higher quality. Without this foundation, or when implemented ineffectively or unnecessarily, digital data entry can be an additional expense that distracts from core monitoring objectives

  9. Numerical Validation of Chemical Compositional Model for Wettability Alteration Processes

    Science.gov (United States)

    Bekbauov, Bakhbergen; Berdyshev, Abdumauvlen; Baishemirov, Zharasbek; Bau, Domenico

    2017-12-01

    Chemical compositional simulation of enhanced oil recovery and surfactant enhanced aquifer remediation processes is a complex task that involves solving dozens of equations for all grid blocks representing a reservoir. In the present work, we perform a numerical validation of the newly developed mathematical formulation which satisfies the conservation laws of mass and energy and allows applying a sequential solution approach to solve the governing equations separately and implicitly. Through its application to the numerical experiment using a wettability alteration model and comparisons with existing chemical compositional model's numerical results, the new model has proven to be practical, reliable and stable.

  10. Video game practice optimizes executive control skills in dual-task and task switching situations.

    Science.gov (United States)

    Strobach, Tilo; Frensch, Peter A; Schubert, Torsten

    2012-05-01

    We examined the relation of action video game practice and the optimization of executive control skills that are needed to coordinate two different tasks. As action video games are similar to real life situations and complex in nature, and include numerous concurrent actions, they may generate an ideal environment for practicing these skills (Green & Bavelier, 2008). For two types of experimental paradigms, dual-task and task switching respectively; we obtained performance advantages for experienced video gamers compared to non-gamers in situations in which two different tasks were processed simultaneously or sequentially. This advantage was absent in single-task situations. These findings indicate optimized executive control skills in video gamers. Similar findings in non-gamers after 15 h of action video game practice when compared to non-gamers with practice on a puzzle game clarified the causal relation between video game practice and the optimization of executive control skills. Copyright © 2012 Elsevier B.V. All rights reserved.

  11. Numerical differential protection

    CERN Document Server

    Ziegler, Gerhard

    2012-01-01

    Differential protection is a fast and selective method of protection against short-circuits. It is applied in many variants for electrical machines, trans?formers, busbars, and electric lines.Initially this book covers the theory and fundamentals of analog and numerical differential protection. Current transformers are treated in detail including transient behaviour, impact on protection performance, and practical dimensioning. An extended chapter is dedicated to signal transmission for line protection, in particular, modern digital communication and GPS timing.The emphasis is then pla

  12. Technology Investments in the NASA Entry Systems Modeling Project

    Science.gov (United States)

    Barnhardt, Michael; Wright, Michael; Hughes, Monica

    2017-01-01

    The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game Changing Development (GCD) Program, is engaged in maturation of fundamental research developing aerosciences, materials, and integrated systems products for entry, descent, and landing(EDL)technologies [1]. To date, the ESM project has published over 200 papers in these areas, comprising the bulk of NASAs research program for EDL modeling. This presentation will provide an overview of the projects successes and challenges, and an assessment of future investments in EDL modeling and simulation relevant to NASAs mission

  13. Electronic Chemotherapy Order Entry: A Major Cancer Center's Implementation.

    Science.gov (United States)

    Sklarin, Nancy T; Granovsky, Svetlana; O'Reilly, Eileen M; Zelenetz, Andrew D

    2011-07-01

    Implementation of a computerized provider order entry system for complex chemotherapy regimens at a large cancer center required intense effort from a multidisciplinary team of clinical and systems experts with experience in all facets of the chemotherapy process. The online tools had to resemble the paper forms used at the time and parallel the successful established process as well as add new functionality. Close collaboration between the institution and the vendor was necessary. This article summarizes the institutional efforts, challenges, and collaborative processes that facilitated universal chemotherapy computerized electronic order entry across multiple sites during a period of several years.

  14. Entry, Descent and Landing Systems Analysis Study: Phase 1 Report

    Science.gov (United States)

    DwyerCianciolo, Alicia M.; Davis, Jody L.; Komar, David R.; Munk, Michelle M.; Samareh, Jamshid A.; Powell, Richard W.; Shidner, Jeremy D.; Stanley, Douglas O.; Wilhite, Alan W.; Kinney, David J.; hide

    2010-01-01

    NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to make in order to successfully land large payloads at Mars for both robotic and human-scale missions. This paper summarizes the motivation, approach and top-level results from Year 1 of the study, which focused on landing 10-50 mt on Mars, but also included a trade study of the best advanced parachute design for increasing the landed payloads within the EDL architecture of the Mars Science Laboratory (MSL) mission

  15. Journal entries facilitating preprofessional scientific literacy and mutualistic symbiotic relationships

    Science.gov (United States)

    Vander Vliet, Valerie J.

    This study explored journal writing as an alternative assessment to promote the development of pre-professional scientific literacy and mutualistic symbiotic relationships between teaching and learning, instruction and assessment, and students and teachers. The larger context of this study is an action reaction project of the attempted transformation of a traditional first year undergraduate pre-professional biology class to sociocultural constructivist principles. The participants were commuter and residential, full and part-time students ranging in age from 18 to 27 and 18/21 were female. The backgrounds of the students varied considerably, ranging from low to upper middle income, including students of Black and Asian heritage. The setting was a medium-sized Midwestern university. The instructor has twenty years of experience teaching Biology at the college level. The data were analyzed using the constant comparative method and the development of grounded theory. The journal entries were analyzed as to their function and form in relationship to the development of multiple aspects of pre-professional scientific literacy. The perceptions of the students as to the significance of the use of journal entries were also determined through the analysis of their use of journal entries in their portfolios and statements in surveys and portfolios. The analysis revealed that journal entries promoted multiple aspects of pre-professional scientific literacy in both students and the instructor and facilitated the development of mutualistic symbiotic relationships between teaching and learning, instruction and assessment, and students and teachers. The function analysis revealed that the journal entries fulfilled the functions intended for the development of multiple aspects of pre-professional scientific literacy. The complexity of journal writing emerged from the form analysis, which revealed the multiple form elements inherent in journal entries. Students perceived journal

  16. The Secret of Guided Missile Re-Entry,

    Science.gov (United States)

    1986-06-25

    I RD-PAI169 598 THE SECRET OF GUIDED MISSILE RE-ENTRY(U) FOREIGN / I TECHNOLOGY DIV NRIGHT-PATTERSON RFB OH J CHEN ET AL. I 25 JUN 96 FTD-ID(RS)T...TECHNOLOGY DIVISION THE SECRET OF GUIDED MISSILE RE-ENTRY by Chen Jingzhong, An Sehua J L 0 7 ’:;85’ ’ 0 *Approved for public release; Distribution...unlimite t d. :. 86 7 034.. FTD- ID(RS)T-0459-86 HUMAN TRANSLATION FTD-ID(RS)T-0459-86 25 June 1986 MICROFICHE NR: F - - 0Q 9? THE SECRET OF GUIDED

  17. A Systematic Assessment of Empirical Research on Foreign Entry Mode

    DEFF Research Database (Denmark)

    Wulff, Jesper

    2016-01-01

    of dimensions. Findings Findings question the frequent use of commonly used measures (e.g. advertising intensity) and control variables (e.g. firm size) and suggest that statements about the importance of mode choice for subsidiary performance may be premature. Methodologically, this study identifies critical...... issues with regard to interpretation of interactions and the entry mode choice set. Research limitations/implications This study limits itself to study the direction of relationships and does not analyze effect sizes. Further, future research may benefit from broadening the entry mode choice by extending...

  18. An Improved Cross-Layering Design for IPv6 Fast Handover with IEEE 802.16m Entry Before Break Handover

    Science.gov (United States)

    Kim, Ronny Yongho; Jung, Inuk; Kim, Young Yong

    IEEE 802.16m is an advanced air interface standard which is under development for IMT-Advanced systems, known as 4G systems. IEEE 802.16m is designed to provide a high data rate and a Quality of Service (QoS) level in order to meet user service requirements, and is especially suitable for mobilized environments. There are several factors that have great impact on such requirements. As one of the major factors, we mainly focus on latency issues. In IEEE 802.16m, an enhanced layer 2 handover scheme, described as Entry Before Break (EBB) was proposed and adopted to reduce handover latency. EBB provides significant handover interruption time reduction with respect to the legacy IEEE 802.16 handover scheme. Fast handovers for mobile IPv6 (FMIPv6) was standardized by Internet Engineering Task Force (IETF) in order to provide reduced handover interruption time from IP layer perspective. Since FMIPv6 utilizes link layer triggers to reduce handover latency, it is very critical to jointly design FMIPv6 with its underlying link layer protocol. However, FMIPv6 based on new handover scheme, EBB has not been proposed. In this paper, we propose an improved cross-layering design for FMIPv6 based on the IEEE 802.16m EBB handover. In comparison with the conventional FMIPv6 based on the legacy IEEE 802.16 network, the overall handover interruption time can be significantly reduced by employing the proposed design. Benefits of this improvement on latency reduction for mobile user applications are thoroughly investigated with both numerical analysis and simulation on various IP applications.

  19. Entry-Item-Quantity-ABC Analysis-Based Multitype Cigarette Fast Sorting System

    Directory of Open Access Journals (Sweden)

    Ying Zhao

    2012-01-01

    Full Text Available Numerous items, small order, and frequent delivery are the characteristics of many distribution centers. Such characteristics generally increase the operating costs of the distribution center. To remedy this problem, this study employs the Entry-Item-Quantity (EIQ method to identify the characteristic of the cigarette distribution center and further analyzes the importance degree of customers and the frequently ordered products by means of EQ/EN/IQ-B/IK statistic charts. Based on these analyses as well as the total replenishment cost optimization model, multipicking strategies and combined multitype picking equipment allocation is then formulated accordingly. With such design scheme, the cigarette picking costs of the distribution center are expected to reduce. Finally, the specific number of equipment is figured out in order to meet the capability demand of the case cigarette distribution center.

  20. The Effects of Physical Manipulatives on Children's Numerical Strategies

    Science.gov (United States)

    Manches, Andrew; O'Malley, Claire

    2016-01-01

    This article focuses on how the representational properties of manipulatives affect the strategies children employ in problem solving. Two studies examined the effect of physical materials on 4-7-year-old children's problem solving strategies in a numerical (i.e., additive composition) task. The first study showed how children not only identified…

  1. Selection of maintenance tasks

    Energy Technology Data Exchange (ETDEWEB)

    Dean, B; Rombos, P [Wardrop (W.L.) and Associates Ltd., Winnipeg, MB (Canada)

    1995-10-01

    Two methodologies for maintenance task selection, Reliability Centre Maintenance (RCM) and Degradation Mode Analysis (DMA), are compared with regard to application in the nuclear industry and potential for application at CANDU nuclear power plants. RCM is the favoured one of the two methodologies. It is more thorough than DMA, is well supported within the US nuclear industry, and - with experience in application - is gaining cost effectiveness. There is interest in the use of RCM in other nations, including France and Japan, and it is already being implemented at Bruce A NGS and Bruce B NGS in Canada. DMA lags behind RCM in development and currently there is little experience to support claims of major benefits at reduced cost. Significant advantages over RCM need to be demonstrated if DMA is to gain acceptance in the nuclear industry. (author). 41 refs., 7 tabs., 8 figs.

  2. Selection of maintenance tasks

    International Nuclear Information System (INIS)

    Dean, B.; Rombos, P.

    1995-10-01

    Two methodologies for maintenance task selection, Reliability Centre Maintenance (RCM) and Degradation Mode Analysis (DMA), are compared with regard to application in the nuclear industry and potential for application at CANDU nuclear power plants. RCM is the favoured one of the two methodologies. It is more thorough than DMA, is well supported within the US nuclear industry, and - with experience in application - is gaining cost effectiveness. There is interest in the use of RCM in other nations, including France and Japan, and it is already being implemented at Bruce A NGS and Bruce B NGS in Canada. DMA lags behind RCM in development and currently there is little experience to support claims of major benefits at reduced cost. Significant advantages over RCM need to be demonstrated if DMA is to gain acceptance in the nuclear industry. (author). 41 refs., 7 tabs., 8 figs

  3. Confidence in Numerical Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Hemez, Francois M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-23

    This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to “forecast,” that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists “think.” This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. “Confidence” derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.

  4. Confidence in Numerical Simulations

    International Nuclear Information System (INIS)

    Hemez, Francois M.

    2015-01-01

    This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to ''forecast,'' that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists ''think.'' This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. ''Confidence'' derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.

  5. Frequency of nursing tasks in medical and surgical wards.

    Science.gov (United States)

    Farquharson, Barbara; Bell, Cheryl; Johnston, Derek; Jones, Martyn; Schofield, Pat; Allan, Julia; Ricketts, Ian; Morrison, Kenny; Johnston, Marie

    2013-09-01

    To explore the frequency of different nursing tasks in medical and surgical wards. The time nurses spend on direct patient care is important for both patients and nurses. However, little is known about the time nurses spend on various nursing tasks. A real-time, repeated measures design conducted amongst 67 (n = 39 medical, n = 28 surgical) UK hospital nurses. Between September 2011 and August 2012 participants completed an electronic diary version of a classification of nursing tasks (WOMBAT) during shifts. A total of 961 real-time measures of nursing task were obtained. Direct patient care [median = 37.5%, interquartile range = 27.8], indirect care (median = 11.1%, interquartile range = 19.4) and medication (median = 11.1%, interquartile range = 18.8) were most commonly reported. Participants were interrupted in 62% of entries (interquartile range = 35), reported adequate time in 78% (interquartile range = 31) and adequate resources in 89% (interquartile range = 36). Ward-related tasks were significantly more frequent on medical wards than surgical wards but otherwise there were no significant differences. Nurses spend the highest proportion of time in direct patient care and majority of this on core nursing activities. Interruptions to tasks are common. Nurses tend to report adequate time/resources. The frequency of nursing tasks is similar in medical and surgical wards. Nurse managers should review the level of interruptions to nurses' work and ensure appropriate levels of supervision. © 2013 John Wiley & Sons Ltd.

  6. Empty Sets as Part of the Numerical Continuum: Conceptual Precursors to the Zero Concept in Rhesus Monkeys

    Science.gov (United States)

    Merritt, Dustin J.; Rugani, Rosa; Brannon, Elizabeth M.

    2009-01-01

    The goal of the current research was to explore whether monkeys possess conceptual precursors necessary for understanding zero. We trained rhesus monkeys on a nonsymbolic numerical matching-to-sample task, and on a numerical ordering task. We then introduced nondifferentially reinforced trials that contained empty sets to determine whether monkeys…

  7. Effects of particle's off-axis position, shape, orientation and entry position on resistance changes of micro Coulter counting devices

    International Nuclear Information System (INIS)

    Qin, Zhenpeng; Zhe, Jiang; Wang, Guo-Xiang

    2011-01-01

    With the recent advance in micro/nano-fabrication technology, micro Coulter counters have been widely used in detecting and characterizing micro- and nanoscale objects. In this paper, the electrical resistance change during translocation of a non-conducting particle through a channel is studied numerically. The numerical results are validated by proven analytical results available in the literature. The effects of particle's off-axis position, shape and orientation, and entry position are studied for particles with a large dynamic range. From the numerical results, a new fitted correlation is proposed that can accurately predict the resistance change caused by off-axis spherical particles regardless of their size. The shape and orientation effects of the electrical resistance change are studied by changing the axis ratio of spheroid particles and their orientation angles. Results show that a particle's shape and orientation have a significant influence on the resistance change. Simulation of an entry effect indicates that a particle starts to induce a resistance change before it enters the channel and still causes a resistance change even after the particle exits the channel completely. This study will offer some guidelines in designing and implementing Coulter counting devices and experiments, and provide insights into explaining experimental results

  8. Essential numerical computer methods

    CERN Document Server

    Johnson, Michael L

    2010-01-01

    The use of computers and computational methods has become ubiquitous in biological and biomedical research. During the last 2 decades most basic algorithms have not changed, but what has is the huge increase in computer speed and ease of use, along with the corresponding orders of magnitude decrease in cost. A general perception exists that the only applications of computers and computer methods in biological and biomedical research are either basic statistical analysis or the searching of DNA sequence data bases. While these are important applications they only scratch the surface of the current and potential applications of computers and computer methods in biomedical research. The various chapters within this volume include a wide variety of applications that extend far beyond this limited perception. As part of the Reliable Lab Solutions series, Essential Numerical Computer Methods brings together chapters from volumes 210, 240, 321, 383, 384, 454, and 467 of Methods in Enzymology. These chapters provide ...

  9. Numerical relativity beyond astrophysics

    Science.gov (United States)

    Garfinkle, David

    2017-01-01

    Though the main applications of computer simulations in relativity are to astrophysical systems such as black holes and neutron stars, nonetheless there are important applications of numerical methods to the investigation of general relativity as a fundamental theory of the nature of space and time. This paper gives an overview of some of these applications. In particular we cover (i) investigations of the properties of spacetime singularities such as those that occur in the interior of black holes and in big bang cosmology. (ii) investigations of critical behavior at the threshold of black hole formation in gravitational collapse. (iii) investigations inspired by string theory, in particular analogs of black holes in more than 4 spacetime dimensions and gravitational collapse in spacetimes with a negative cosmological constant.

  10. Testability of numerical systems

    International Nuclear Information System (INIS)

    Soulas, B.

    1992-01-01

    In order to face up to the growing complexity of systems, the authors undertook to define a new approach for the qualification of systems. This approach is based on the concept of Testability which, supported by system modelization, validation and verification methods and tools, would allow Integrated Qualification process, applied throughout the life-span of systems. The general principles of this approach are introduced in the general case of numerical systems; in particular, this presentation points out the difference between the specification activity and the modelization and validation activity. This approach is illustrated firstly by the study of a global system and then by case of communication protocol as the software point of view. Finally MODEL which support this approach is described. MODEL tool is a commercial tool providing modelization and validation techniques based on Petri Nets with triple extension: Predicate/Transition, Timed and Stochastic Petri Nets

  11. Numerical relativity beyond astrophysics.

    Science.gov (United States)

    Garfinkle, David

    2017-01-01

    Though the main applications of computer simulations in relativity are to astrophysical systems such as black holes and neutron stars, nonetheless there are important applications of numerical methods to the investigation of general relativity as a fundamental theory of the nature of space and time. This paper gives an overview of some of these applications. In particular we cover (i) investigations of the properties of spacetime singularities such as those that occur in the interior of black holes and in big bang cosmology. (ii) investigations of critical behavior at the threshold of black hole formation in gravitational collapse. (iii) investigations inspired by string theory, in particular analogs of black holes in more than 4 spacetime dimensions and gravitational collapse in spacetimes with a negative cosmological constant.

  12. Essays on empirical industrial organization : Entry and innovation

    NARCIS (Netherlands)

    Fernandez Machado, Roxana

    2017-01-01

    The dissertation contains three essays on empirical industrial organization devoted to studying firms' strategic interaction in different settings. The first essay develops an entry model to address an important matter in the area of urban economics: the development of cities. In particular, it

  13. Integrated alarm annunciation and entry control systems -- Survey results

    International Nuclear Information System (INIS)

    Clever, J.J.; Arakaki, L.H.; Monaco, F.M.; Juarros, L.E.; Quintana, G.R.

    1993-10-01

    This report provides the results and analyses of a detailed survey undertaken in Summer 1993 to address integrated intrusion detection alarm annunciation and entry control system issues. This survey was undertaken as a first attempt toward beginning to answer questions about integrated systems and commercial capabilities to meet or partially meet US Department of Energy (DOE) site needs

  14. 7 CFR 319.8-26 - Material refused entry.

    Science.gov (United States)

    2010-01-01

    ... Plant Protection Act (7 U.S.C. 7714 and 7731). Neither the Department of Agriculture nor the inspector... 7 Agriculture 5 2010-01-01 2010-01-01 false Material refused entry. 319.8-26 Section 319.8-26 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION...

  15. 9 CFR 93.806 - Animals refused entry.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Animals refused entry. 93.806 Section 93.806 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS IMPORTATION OF...

  16. Predictors of Student Success in Entry-Level Science Courses

    Science.gov (United States)

    Singh, Mamta K.

    2009-01-01

    Although the educational evaluation process is useful and valuable and is supported by the Higher Education Act, a strong research base for program evaluation of college entry-level science courses is still lacking. Studies in science disciplines such as, biology, chemistry, and physics have addressed various affective and demographic factors and…

  17. Assessing welfare impact of entry into power market

    International Nuclear Information System (INIS)

    Cho, In-Koo; Kim, Hyunsook

    2013-01-01

    This paper calculates the welfare impact of a new entrant based on the location of entry in the Korean electricity market. We use two different models. One is the optimal fuel mix model to estimate the effect of a new entry in the long run. The other is the variable cost minimization model to assess the contribution of an existing installed private generator in the short run. A specific private generator, which has a cost advantage, saves a substantial amount of system-wide variable costs. We show that the right location for a new entrant can save power generation costs significantly, even if a new entrant does not have a cost advantage. - Highlights: • This paper calculates the welfare impact of a new entrant based on the location of entry. • We use two different models to estimate the entry effect. • The minimum and maximum cost savings of a new entrant are about 0.3% and 0.84% of total generation cost. • Even if a new entrant has no cost advantage, its choice of location could save money

  18. On Double-Entry Bookkeeping: The Mathematical Treatment

    Science.gov (United States)

    Ellerman, David

    2014-01-01

    Double-entry bookkeeping (DEB) implicitly uses a specific mathematical construction, the group of differences using pairs of unsigned numbers ("T-accounts"). That construction was only formulated abstractly in mathematics in the nineteenth century, even though DEB had been used in the business world for over five centuries. Yet the…

  19. 30 CFR 840.12 - Right of entry.

    Science.gov (United States)

    2010-07-01

    ... Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PERMANENT PROGRAM... of entry. (a) Within its jurisdiction, the State regulatory authority shall have authority that... mining and reclamation operation without advance notice upon presentation of appropriate credentials. No...

  20. Late entry to antenatal care in New South Wales, Australia

    Directory of Open Access Journals (Sweden)

    Rubin George

    2006-08-01

    Full Text Available Abstract Aims This study aimed to assess the prevalence of women who entered antenatal care (ANC late and to identify factors related to the late entry to ANC in New South Wales (NSW in 2004. Methods The NSW Midwives Data Collection contained data of 85,034 women who gave birth in 2004. Data were downloaded using SAS and transferred to STATA 8.0. Entering ANC after 12 weeks of gestation was classified as late. The Andersen Health Seeking Behaviour Model was used for selection and analyses of related factors. Regression and hierarchical analyses were used to identify significant factors and their relative contributions to the variation of pregnancy duration at entry to ANC. Results 41% of women commenced ANC after 12 weeks of gestation. Inequality existed between groups of women with predisposing characteristics and enabling resources contributed more to the variation in pregnancy duration at entry to ANC than needs. The groups of women with highest risk were teenagers, migrants from developing countries, women living in Western Sydney, Aboriginal and Torres Strait Islanders, women with three or more previous pregnancies and heavy smokers. The high risk groups with largest number of women were migrants from developing countries and women living in Western Sydney. Conclusion A large number of women in NSW entered ANC late in their pregnancies. Efforts to increase early entry to ANC should be targeted on identified high risk groups of women.

  1. 46 CFR 14.305 - Entries in continuous discharge book.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Entries in continuous discharge book. 14.305 Section 14.305 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN SHIPMENT... discharge book. If the merchant mariner holds a continuous discharge book, the master or individual in...

  2. Recent Health Care Use and Medicaid Entry of Medicare Beneficiaries.

    Science.gov (United States)

    Keohane, Laura M; Trivedi, Amal N; Mor, Vincent

    2017-10-01

    To examine the relationship between Medicaid entry and recent health care use among Medicare beneficiaries. We identified Medicare beneficiaries without full Medicaid or use of hospital or nursing home services in 2008 (N = 2,163,387). A discrete survival analysis estimated beneficiaries' monthly likelihood of entry into the full Medicaid program between January 2009 and June 2010. During the 18-month study period, Medicaid entry occurred for 1.1% and 3.7% of beneficiaries who aged into Medicare or originally qualified for Medicare due to disability, respectively. Among beneficiaries who aged into Medicare, 49% of new Medicaid participants had no use of inpatient, skilled nursing facility, or nursing home services during the study period. Individuals who recently used inpatient, skilled nursing facility or nursing home services had monthly rates of 1.9, 14.0, and 38.1 new Medicaid participants per 1,000 beneficiaries, respectively, compared with 0.4 new Medicaid participants per 1,000 beneficiaries with no recent use of these services. Although recent health care use predicted greater likelihood of Medicaid entry, half of new Medicaid participants used no hospital or nursing home care during the study period. These patterns should be considered when designing and evaluating interventions to reform health care delivery for dual-eligible beneficiaries. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. SME's perceptions regarding strategic and structural entry barriers

    NARCIS (Netherlands)

    Lutz, Clemens; Kemp, Ron; Dijkstra, S. Gerhard

    2007-01-01

    Abstract Extant literature discusses a large number of different entry barriers that may hamper market efficiency or entrepreneurial activity. In practice several of these barriers cohere and stem from the same root. Factor analysis is used to identify the underlying dimensions of these barriers. 7

  4. Childhood cancer survivors' school (re)entry: Australian parents' perceptions.

    Science.gov (United States)

    McLoone, J K; Wakefield, C E; Cohn, R J

    2013-07-01

    Starting or returning to school after intense medical treatment can be academically and socially challenging for childhood cancer survivors. This study aimed to evaluate the school (re)entry experience of children who had recently completed cancer treatment. Forty-two semi-structured telephone interviews were conducted to explore parents' perceptions of their child's (re)entry to school after completing treatment (23 mothers, 19 fathers, parent mean age 39.5 years; child mean age 7.76 years). Interviews were analysed using the framework of Miles and Huberman and emergent themes were organised using QSR NVivo8. Parents closely monitored their child's school (re)entry and fostered close relationships with their child's teacher to ensure swift communication of concerns should they arise. The most commonly reported difficulty related to aspects of peer socialisation; survivors either displayed a limited understanding of social rules such as turn taking, or related more to older children or teachers relative to their peers. Additionally, parents placed a strong emphasis on their child's overall personal development, above academic achievement alone. Improved parent, clinician and teacher awareness of the importance of continued peer socialisation during the treatment period is recommended in order to limit the ongoing ramifications this may have on school (re)entry post-treatment completion. © 2013 John Wiley & Sons Ltd.

  5. Competition and entry in banking: implications for capital regulation

    NARCIS (Netherlands)

    Boot, A.W.A.; Marinč, M.

    2006-01-01

    We assess how capital regulation interacts with the degree of competitiveness of the banking industry. We particularly ask two questions: i) how does capital regulation affect (endogenous) entry; and ii) how do (exogenous) changes in the competitive environment affect bank monitoring choices and the

  6. Love me tender: new entry in popular music

    NARCIS (Netherlands)

    Mol, J.; Chiu, M.M.; Wijnberg, N.

    2012-01-01

    The purpose of this paper is to investigate new entry as a process of organizational change against the background of the digital revolution in the music industry. The study analyzes questionnaire data gathered from 131 companies active in the Dutch music industry that collectively engaged in 215

  7. Partial Acquistion as an Entry Mode in Transition Economies

    DEFF Research Database (Denmark)

    Jakobsen, Kristian; Meyer, Klaus E.

    2007-01-01

    Multinational enterprises often acquire stakes in an existing enterprise when entering emerging economies. This paper examines the determinants of entry mode choices with a special focus on these partial acquisitions, which have received little attention in the scholarly literature. We show...... negotiations are subject to significant stakeholder interference. (For more information, please contact: Kristian Jakobsen, Copenhagen Business School, Denmark: kj.int@cbs.dk)...

  8. Does competitive entry structurally change key marketing metrics?

    NARCIS (Netherlands)

    Kornelis, Marcel; Dekimpe, Marnik G.; Leeflang, Peter S. H.

    To what extent does competitive entry create a structural change in key marketing metrics? New players mayjust be a temporal nuisance to incumbents, but could also fundamentally change the latter's performance evolution, or induce them to permanently alter their spending levels and/or pricing

  9. Does competitive entry structurally change key marketing metrics?

    NARCIS (Netherlands)

    Kornelis, M.; Dekimpe, de M.G.; Leeflang, P.S.H.

    2008-01-01

    To what extent does competitive entry create a structural change in keymarketingmetrics? New players may just be a temporal nuisance to incumbents, but could also fundamentally change the latter's performance evolution, or induce them to permanently alter their spending levels and/or pricing

  10. Powdery Mildew Resistance in 268 Entries of Hordeum vulgare

    DEFF Research Database (Denmark)

    Jiang, W.M.; Jørgensen, Jørgen Helms; Torp, J

    1984-01-01

    A collection of 24 'Spontaneum' barley [H. vulgare ssp. spontaneum] entries and one comprising 244 Ethiopian barleys [H. vulgare ssp. vulgare] were tested for resistance to 4 powdery mildew [used by Erysiphe graminis f. sp. hordei] cultures that carried genes for virulence corresponding to most...

  11. 31 CFR 357.0 - Book-entry systems.

    Science.gov (United States)

    2010-07-01

    ... AND BILLS HELD IN LEGACY TREASURY DIRECT General Information § 357.0 Book-entry systems. (a) Treasury... securities are held in a tiered system through securities intermediaries such as financial institutions or... securities are held directly by the Department of the Treasury in accounts maintained in the investor's name...

  12. The role of digital data entry in participatory environmental monitoring

    NARCIS (Netherlands)

    Brammer, Jeremy R.; Brunet, Nicolas D.; Burton, A.C.; Cuerrier, Alain; Danielsen, Finn; Dewan, Kanwaljeet; Herrmann, Thora Martina; Jackson, Micha V.; Kennett, Rod; Larocque, Guillaume; Mulrennan, Monica; Pratihast, Arun Kumar; Saint-Arnaud, Marie; Scott, Colin; Humphries, Murray M.

    2016-01-01

    Many argue that monitoring conducted exclusively by scientists is insufficient to address ongoing environmental challenges. One solution entails the use of mobile digital devices in participatory monitoring (PM) programs. But how digital data entry affects programs with varying levels of

  13. 45 CFR 670.34 - Entry and exit ports.

    Science.gov (United States)

    2010-10-01

    ... ANTARCTIC ANIMALS AND PLANTS Import Into and Export From the United States § 670.34 Entry and exit ports. (a) Any native mammal, native bird, or native plants taken within Antarctica that are imported into or... Orleans, Louisiana. (7) New York, New York. (8) Seattle, Washington. (9) Dallas/Fort Worth, Texas. (10...

  14. Entry Level Systems Analysts: What Does the Industry Want?

    Directory of Open Access Journals (Sweden)

    Donna M. Grant

    2016-06-01

    Full Text Available This study investigates the skill sets necessary for entry level systems analysts. Towards this end, the study combines two sources of data, namely, a content analysis of 200 systems analysts’ online job advertisements and a survey of 20 senior Information Systems (IS professionals. Based on Chi-square tests, the results reveal that most employers prefer entry level systems analysts with an undergraduate Computer Science degree. Furthermore, most of the employers prefer entry level systems analysts to have some years of experience as well as industry certifications. The results also reveal that there is a higher preference for entry level systems analysts who have non-technical and people skills (e.g., problem solving and oral communication. The empirical results from this study will inform IS educators as they develop future systems analysts. Additionally, the results will be useful to the aspiring systems analysts who need to make sure that they have the necessary job skills before graduating and entering the labor market.

  15. Infectious Entry and Neutralization of Pathogenic JC Polyomaviruses

    Directory of Open Access Journals (Sweden)

    Eileen M. Geoghegan

    2017-10-01

    Full Text Available Summary: Progressive multifocal leukoencephalopathy (PML is a lethal brain disease caused by uncontrolled replication of JC polyomavirus (JCV. JCV strains recovered from the brains of PML patients carry mutations that prevent the engagement of sialylated glycans, which are thought to serve as receptors for the infectious entry of wild-type JCV. In this report, we show that non-sialylated glycosaminoglycans (GAGs can serve as alternative attachment receptors for the infectious entry of both wild-type and PML mutant JCV strains. After GAG-mediated attachment, PML mutant strains engage non-sialylated non-GAG co-receptor glycans, such as asialo-GM1. JCV-neutralizing monoclonal antibodies isolated from patients who recovered from PML appear to block infection by preventing the docking of post-attachment co-receptor glycans in an apical pocket of the JCV major capsid protein. Identification of the GAG-dependent/sialylated glycan-independent alternative entry pathway should facilitate the development of infection inhibitors, including recombinant neutralizing antibodies. : Geoghegan et al. show that JC polyomavirus strains that cause brain disease infect cells via a pathway involving a heparin-like attachment receptor and a non-sialylated co-receptor. Candidate therapeutic human monoclonal antibodies neutralize by blocking co-receptor engagement. Keywords: polyomavirus, JC, BK, SV40, progressive multifocal leukoencephalopathy, PML, monoclonal antibody, mAb, virus entry, receptor

  16. Studies on endogenous circulating calcium entry blocker and stimulator

    International Nuclear Information System (INIS)

    Pang, P.K.T.; Yang, M.C.M.

    1986-01-01

    Several synthetic compounds have been studied extensively for their calcium entry blockade and stimulation in smooth muscles. It is hypothesized that there should be endogenous substances which control calcium entry into cells. We recently investigated the effect of some vasoactive hormones on calcium entry. Our studies on rat tail artery helical strip showed that the in vitro vasoconstriction produced by arginine vasopressin (AVP) decreased stepwise with decreasing concentration of both calcium. After exposure of the tail artery to calcium-free Ringer's solution for 1 minute or longer, the tissue lost its ability to respond to AVP. Subsequent addition of calcium to the medium produced immediate contraction. Measurements of low affinity lanthanum resistant pool of calcium with 45 Ca showed that AVP increased calcium uptake by tail artery in a dose-dependent manner. In another study rat tail artery helical strip indicated that the vasorelaxing action of parathyroid hormone (PTH) was related to an inhibition of calcium uptake. AVP or 60 mM potassium chloride increased the low affinity lanthanum resistant pool of calcium in rate tail artery and PTH inhibited the increase. In conclusion, AVP and PTH may behave like endogenous calcium entry stimulator and inhibitor respectively in vascular tissues

  17. Risk Factors for Mosquito House Entry in the Lao PDR

    NARCIS (Netherlands)

    Hiscox, A.F.; Khammanithong, P.; Kaul, S.; Sananikhom, P.; Luthi, R.; Hill, N.; Brey, P.T.; Lindsay, S.W.

    2013-01-01

    Background Construction of the Nam Theun 2 hydroelectric project and flooding of a 450 km2 area of mountain plateau in south-central Lao PDR resulted in the resettlement of 6,300 people to newly built homes. We examined whether new houses would have altered risk of house entry by mosquitoes compared

  18. Becoming Counselors through Growth and Learning: The Entry Transition Process

    Science.gov (United States)

    Wagner, Holly H.; Hill, Nicole R.

    2015-01-01

    This article explored counselor development within the entry transition into counselor education programs using 4 interviews and interpretive dialogues with 8 beginning counselors. Six categories resulted from the authors' grounded theory analysis: Anticipation, Evolving Identity, Growth and Learning, Coping, Choosing to Trust the Process, and…

  19. Orbiter Entry Aerothermodynamics Practical Engineering and Applied Research

    Science.gov (United States)

    Campbell, Charles H.

    2009-01-01

    The contents include: 1) Organization of the Orbiter Entry Aeroheating Working Group; 2) Overview of the Principal RTF Aeroheating Tools Utilized for Tile Damage Assessment; 3) Description of the Integrated Tile Damage Assessment Team Analyses Process; 4) Space Shuttle Flight Support Process; and 5) JSC Applied Aerosciences and CFD Branch Applied Research Interests.

  20. Widening Participation and Contextual Entry Policy in Accounting and Finance

    Science.gov (United States)

    Rowbottom, N.

    2017-01-01

    The paper examines the performance of accounting and finance students entering university via a "widening participation" scheme that seeks to attract students who have been historically under-represented in higher education. Focus is placed on the policy of providing contextual entry offers that recognise that academic qualifications be…

  1. 19 CFR 147.43 - Entry under the Customs laws.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Entry under the Customs laws. 147.43 Section 147.43 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF... the Customs laws. (a) Payment of duties and taxes. Any applicable duties and internal revenue taxes on...

  2. Rupture Loop Annex (RLA) ion exchange vault entry and characterization

    International Nuclear Information System (INIS)

    Ham, J.E.

    1996-01-01

    This engineering report documents the entry and characterization of the Rupture Loop Annex Ion Exchange (RLAIX) Vault located near the 309 Building's Plutonium Recycle Test Reactor (PRTR). Twelve ion exchange columns were found in the vault. Some of which contained transuranics, Cs 137, and Co 60. The characterization information is necessary for future vault cleanout and column disposal

  3. From nascent to actual entrepreneurship: the effect of entry barriers

    NARCIS (Netherlands)

    A.J. van Stel (André); D. Storey (David); A.R.M. Wennekers (Sander); A.R. Thurik (Roy)

    2005-01-01

    textabstractThis exploratory study focuses on the conversion from nascent to actual entrepreneurship and the role of entry barriers in this process. Using data for a sample of countries participating in the Global Entrepreneurship Monitor between 2002 and 2004, we estimate a twoequation model

  4. Oblique water entry of a three dimensional body

    Directory of Open Access Journals (Sweden)

    Scolan Yves-Marie

    2014-12-01

    Full Text Available The problem of the oblique water entry of a three dimensional body is considered. Wagner theory is the theoretical framework. Applications are discussed for an elliptic paraboloid entering an initially flat free surface. A dedicated experimental campaign yields a data base for comparisons. In the present analysis, pressure, force and dynamics of the wetted surface expansion are assessed.

  5. Crown sealing and buckling instability during water entry of spheres

    KAUST Repository

    Marston, J. O.; Truscott, T. T.; Speirs, N. B.; Mansoor, Mohammad M.; Thoroddsen, Sigurdur T

    2016-01-01

    . Furthermore, a comparison between the entry of room-temperature spheres, where the contact line pins around the equator, and Leidenfrost spheres (i.e. an immersed superheated sphere encompassed by a vapour layer), where there is no contact line, indicates

  6. Computing the Alexander Polynomial Numerically

    DEFF Research Database (Denmark)

    Hansen, Mikael Sonne

    2006-01-01

    Explains how to construct the Alexander Matrix and how this can be used to compute the Alexander polynomial numerically.......Explains how to construct the Alexander Matrix and how this can be used to compute the Alexander polynomial numerically....

  7. A novel small molecule inhibitor of hepatitis C virus entry.

    Directory of Open Access Journals (Sweden)

    Carl J Baldick

    Full Text Available Small molecule inhibitors of hepatitis C virus (HCV are being developed to complement or replace treatments with pegylated interferons and ribavirin, which have poor response rates and significant side effects. Resistance to these inhibitors emerges rapidly in the clinic, suggesting that successful therapy will involve combination therapy with multiple inhibitors of different targets. The entry process of HCV into hepatocytes represents another series of potential targets for therapeutic intervention, involving viral structural proteins that have not been extensively explored due to experimental limitations. To discover HCV entry inhibitors, we utilized HCV pseudoparticles (HCVpp incorporating E1-E2 envelope proteins from a genotype 1b clinical isolate. Screening of a small molecule library identified a potent HCV-specific triazine inhibitor, EI-1. A series of HCVpp with E1-E2 sequences from various HCV isolates was used to show activity against all genotype 1a and 1b HCVpp tested, with median EC50 values of 0.134 and 0.027 µM, respectively. Time-of-addition experiments demonstrated a block in HCVpp entry, downstream of initial attachment to the cell surface, and prior to or concomitant with bafilomycin inhibition of endosomal acidification. EI-1 was equally active against cell-culture adapted HCV (HCVcc, blocking both cell-free entry and cell-to-cell transmission of virus. HCVcc with high-level resistance to EI-1 was selected by sequential passage in the presence of inhibitor, and resistance was shown to be conferred by changes to residue 719 in the carboxy-terminal transmembrane anchor region of E2, implicating this envelope protein in EI-1 susceptibility. Combinations of EI-1 with interferon, or inhibitors of NS3 or NS5A, resulted in additive to synergistic activity. These results suggest that inhibitors of HCV entry could be added to replication inhibitors and interferons already in development.

  8. MOTIVATING FACTORS AND THE MODES OF ENTRY IN OTHER MARKETS

    Directory of Open Access Journals (Sweden)

    Jusuf ZEKIRI

    2016-09-01

    Full Text Available Organizations that operate in international markets need to make the most important decisions in order to select a best mode of entry into foreign markets. This paper attempts to clarify some of the issues arising in international market selection. A firm must assess before entering a particular market the motives and  potential factors that play a significant role during the process of decision making for market selection. An overview of the current methodologies for market selection based on the literature on international marketing is provided. Therefore, the main objective of the paper is to outline and discuss the relevant issues and challenges from a theoretical viewpoint related with the possible entry modes into international and global markets. This paper concentrates on secondary sources of research regarding the internationalisation of businesses.  According to the previous literature, scholars have already found out some of determinants influencing the efficiency of foreign entry, such as: economic factors, political risk, legal factors, cultural factor, international experience, etc. A model can be outlined from the theoretical viewpoints about the advantages and disadvantage of each foreign market entry strategy discussed. One of the fundamental steps that need to be taken prior to beginning international marketing is the environmental analysis. There are uncontrollable forces which are external forces upon which the management has no direct control, although it can exert an influence. Internal forces are controllable forces upon which the management administers to adapt to changes in the uncontrollable forces. The conclusion will provide a short summary of identified key elements that need to be considered by management in choosing international markets and their foreign market entry modes.

  9. Children's Executive Function Attenuate the Link Between Maternal Intrusiveness and Internalizing Behaviors at School Entry.

    Science.gov (United States)

    Gueron-Sela, Noa; Bedford, Rachael; Wagner, Nicholas J; Propper, Cathi B

    2017-10-20

    The goal of this study was to examine the independent and interactive roles of harsh-intrusive maternal behaviors and children's executive function in the development of internalizing behaviors across the first years of school. A diverse sample (58% African American, 42% European American) of 137 children (48% female) was followed from kindergarten (age 5 years) through school entry (ages 6-7 years). At age 5, maternal harsh-intrusive parenting behaviors were rated from a mother-child structured play task, and children completed 3 executive function tasks that measured inhibitory control, working memory, and attention set-shifting. Teachers reported on children's internalizing behaviors at ages 5, 6, and 7. Harsh-intrusive parenting behaviors at age 5 years were positively related to internalizing behaviors in the first years of school, whereas high executive function abilities at age 5 years were related to lower internalizing behaviors in the first years of school. In addition, executive function buffered the association between parenting behaviors and internalizing behaviors such that the link between harsh-intrusive parenting and child internalizing behaviors was evident only among children with low executive function and not among children with high executive function. Interventions that focus on reducing negative parenting behaviors and improving children's executive function may prevent internalizing behaviors from increasing during times of social and academic challenge.

  10. Assessing Learning Styles of Graduate Entry Nursing Students as a Classroom Research Activity: A quantitative research study.

    Science.gov (United States)

    Gonzales, Lucia K; Glaser, Dale; Howland, Lois; Clark, Mary Jo; Hutchins, Susie; Macauley, Karen; Close, Jacqueline F; Leveque, Noelle Lipkin; Failla, Kim Reina; Brooks, Raelene; Ward, Jillian

    2017-01-01

    A number of studies across different disciplines have investigated students' learning styles. Differences are known to exist between graduate and baccalaureate nursing students. However, few studies have investigated the learning styles of students in graduate entry nursing programs. . Study objective was to describe graduate entry nursing students' learning styles. A descriptive design was used for this study. The Index of Learning Styles (ILS) was administered to 202 graduate entry nursing student volunteers at a southwestern university. Descriptive statistics, tests of association, reliability, and validity were performed. Graduate nursing students and faculty participated in data collection, analysis, and dissemination of the results. Predominant learning styles were: sensing - 82.7%, visual - 78.7%, sequential - 65.8%, and active - 59.9%. Inter-item reliabilities for the postulated subscales were: sensing/intuitive (α=0.70), visual/verbal (α=0.694), sequential/global (α=0.599), and active/reflective (α=0.572). Confirmatory factor analysis for results of validity were: χ 2 (896)=1110.25, pnursing students. This study provided faculty with numerous opportunities for actively engaging students in data collection, analysis, and dissemination of results. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Composite body movements modulate numerical cognition: Evidence from the motion–numerical compatibility effect

    Directory of Open Access Journals (Sweden)

    Xiaorong eCheng

    2015-11-01

    Full Text Available A recent hierarchical model of numerical processing, initiated by Fischer and Brugger (2011 and Fisher (2012, suggested that situated factors, such as different body postures and body movements, can influence the magnitude representation and bias numerical processing. Indeed, Loetscher and colleagues (2008 found that participants’ behavior in a random number generation (RNG task was biased by head rotations. More small numbers were reported after leftward than rightward head turns, i.e. a motion–numerical compatibility effect. Here, by carrying out two experiments, we explored whether similar motion–numerical compatibility effects exist for movements of other important body components, e.g. arms, and for composite body movements as well, which are basis for complex human activities in many ecologically meaningful situations. In Experiment 1, a motion-numerical compatibility effect was observed for lateral rotations of two body components, i.e., the head and arms. Relatively large numbers were reported after making rightward compared to leftward movements for both lateral head and arm turns. The motion-numerical compatibility effect was observed again in Experiment 2 when participants were asked to perform composite body movements of congruent movement directions, e.g., simultaneous head left turns and arm left turns. However, it disappeared when the movement directions were incongruent, e.g., simultaneous head left turns and arm right turns. Taken together, our results extended Loetscher et al.'s (2008 finding by demonstrating that their effect is effector-general and exists for arm movements. Moreover, our study reveals for the first time that the impact of spatial information on numerical processing induced by each of the two sensorimotor-based situated factors, e.g., a lateral head turn and a lateral arm turn, can cancel each other out.

  12. 9 CFR 381.208 - Poultry products offered for entry and entered to be handled and transported as domestic; entry...

    Science.gov (United States)

    2010-01-01

    ... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported Poultry Products § 381.208... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Poultry products offered for entry and....208 Section 381.208 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF...

  13. Helpful Entry Level Skills Checklist--Revised Manual [and] Helpful Entry Level Skill Checklist--Revised Edition.

    Science.gov (United States)

    Child Development Centers of the Bluegrass, Lexington, KY.

    The Helpful Entry Level Skills Checklist was designed to assist preschool teachers in selecting functional skills that children (including children with disabilities) may need to make a successful transition into the public schools. These skills, for the most part, deal with attending, compliance, ability to follow directions, turn taking, ability…

  14. Task A, High energy physics program experiment and theory: Task B, High energy physics program numerical simulation

    International Nuclear Information System (INIS)

    1990-01-01

    This report discusses progress in experimental and theoretical High Energy Physics at Florida State University. Fixed target experiments, collider experiments, computing, networking, VAX upgrade, SSC preparation, detector development, and particle theory are some of the areas covered

  15. Numerical model SMODERP

    Science.gov (United States)

    Kavka, P.; Jeřábek, J.; Strouhal, L.

    2016-12-01

    The contribution presents a numerical model SMODERP that is used for calculation and prediction of surface runoff and soil erosion from agricultural land. The physically based model includes the processes of infiltration (Phillips equation), surface runoff routing (kinematic wave based equation), surface retention, surface roughness and vegetation impact on runoff. The model is being developed at the Department of Irrigation, Drainage and Landscape Engineering, Civil Engineering Faculty, CTU in Prague. 2D version of the model was introduced in last years. The script uses ArcGIS system tools for data preparation. The physical relations are implemented through Python scripts. The main computing part is stand alone in numpy arrays. Flow direction is calculated by Steepest Descent algorithm and in multiple flow algorithm. Sheet flow is described by modified kinematic wave equation. Parameters for five different soil textures were calibrated on the set of hundred measurements performed on the laboratory and filed rainfall simulators. Spatially distributed models enable to estimate not only surface runoff but also flow in the rills. Development of the rills is based on critical shear stress and critical velocity. For modelling of the rills a specific sub model was created. This sub model uses Manning formula for flow estimation. Flow in the ditches and streams are also computed. Numerical stability of the model is controled by Courant criterion. Spatial scale is fixed. Time step is dynamic and depends on the actual discharge. The model is used in the framework of the project "Variability of Short-term Precipitation and Runoff in Small Czech Drainage Basins and its Influence on Water Resources Management". Main goal of the project is to elaborate a methodology and online utility for deriving short-term design precipitation series, which could be utilized by a broad community of scientists, state administration as well as design planners. The methodology will account for

  16. Effect of episodic and working memory impairments on semantic and cognitive procedural learning at alcohol treatment entry.

    Science.gov (United States)

    Pitel, Anne Lise; Witkowski, Thomas; Vabret, François; Guillery-Girard, Bérengère; Desgranges, Béatrice; Eustache, Francis; Beaunieux, Hélène

    2007-02-01

    Chronic alcoholism is known to impair the functioning of episodic and working memory, which may consequently reduce the ability to learn complex novel information. Nevertheless, semantic and cognitive procedural learning have not been properly explored at alcohol treatment entry, despite its potential clinical relevance. The goal of the present study was therefore to determine whether alcoholic patients, immediately after the weaning phase, are cognitively able to acquire complex new knowledge, given their episodic and working memory deficits. Twenty alcoholic inpatients with episodic memory and working memory deficits at alcohol treatment entry and a control group of 20 healthy subjects underwent a protocol of semantic acquisition and cognitive procedural learning. The semantic learning task consisted of the acquisition of 10 novel concepts, while subjects were administered the Tower of Toronto task to measure cognitive procedural learning. Analyses showed that although alcoholic subjects were able to acquire the category and features of the semantic concepts, albeit slowly, they presented impaired label learning. In the control group, executive functions and episodic memory predicted semantic learning in the first and second halves of the protocol, respectively. In addition to the cognitive processes involved in the learning strategies invoked by controls, alcoholic subjects seem to attempt to compensate for their impaired cognitive functions, invoking capacities of short-term passive storage. Regarding cognitive procedural learning, although the patients eventually achieved the same results as the controls, they failed to automate the procedure. Contrary to the control group, the alcoholic groups' learning performance was predicted by controlled cognitive functions throughout the protocol. At alcohol treatment entry, alcoholic patients with neuropsychological deficits have difficulty acquiring novel semantic and cognitive procedural knowledge. Compared with

  17. Arithmetic and algebraic problem solving and resource allocation: the distinct impact of fluid and numerical intelligence.

    Science.gov (United States)

    Dix, Annika; van der Meer, Elke

    2015-04-01

    This study investigates cognitive resource allocation dependent on fluid and numerical intelligence in arithmetic/algebraic tasks varying in difficulty. Sixty-six 11th grade students participated in a mathematical verification paradigm, while pupil dilation as a measure of resource allocation was collected. Students with high fluid intelligence solved the tasks faster and more accurately than those with average fluid intelligence, as did students with high compared to average numerical intelligence. However, fluid intelligence sped up response times only in students with average but not high numerical intelligence. Further, high fluid but not numerical intelligence led to greater task-related pupil dilation. We assume that fluid intelligence serves as a domain-general resource that helps to tackle problems for which domain-specific knowledge (numerical intelligence) is missing. The allocation of this resource can be measured by pupil dilation. Copyright © 2014 Society for Psychophysiological Research.

  18. Agent independent task planning

    Science.gov (United States)

    Davis, William S.

    1990-01-01

    Agent-Independent Planning is a technique that allows the construction of activity plans without regard to the agent that will perform them. Once generated, a plan is then validated and translated into instructions for a particular agent, whether a robot, crewmember, or software-based control system. Because Space Station Freedom (SSF) is planned for orbital operations for approximately thirty years, it will almost certainly experience numerous enhancements and upgrades, including upgrades in robotic manipulators. Agent-Independent Planning provides the capability to construct plans for SSF operations, independent of specific robotic systems, by combining techniques of object oriented modeling, nonlinear planning and temporal logic. Since a plan is validated using the physical and functional models of a particular agent, new robotic systems can be developed and integrated with existing operations in a robust manner. This technique also provides the capability to generate plans for crewmembers with varying skill levels, and later apply these same plans to more sophisticated robotic manipulators made available by evolutions in technology.

  19. Numerical abilities in fish: A methodological review.

    Science.gov (United States)

    Agrillo, Christian; Miletto Petrazzini, Maria Elena; Bisazza, Angelo

    2017-08-01

    The ability to utilize numerical information can be adaptive in a number of ecological contexts including foraging, mating, parental care, and anti-predator strategies. Numerical abilities of mammals and birds have been studied both in natural conditions and in controlled laboratory conditions using a variety of approaches. During the last decade this ability was also investigated in some fish species. Here we reviewed the main methods used to study this group, highlighting the strengths and weaknesses of each of the methods used. Fish have only been studied under laboratory conditions and among the methods used with other species, only two have been systematically used in fish-spontaneous choice tests and discrimination learning procedures. In the former case, the choice between two options is observed in a biologically relevant situation and the degree of preference for the larger/smaller group is taken as a measure of the capacity to discriminate the two quantities (e.g., two shoals differing in number). In discrimination learning tasks, fish are trained to select the larger or the smaller of two sets of abstract objects, typically two-dimensional geometric figures, using food or social companions as reward. Beyond methodological differences, what emerges from the literature is a substantial similarity of the numerical abilities of fish with those of other vertebrates studied. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Numerical aerodynamic simulation (NAS)

    International Nuclear Information System (INIS)

    Peterson, V.L.; Ballhaus, W.F. Jr.; Bailey, F.R.

    1984-01-01

    The Numerical Aerodynamic Simulation (NAS) Program is designed to provide a leading-edge computational capability to the aerospace community. It was recognized early in the program that, in addition to more advanced computers, the entire computational process ranging from problem formulation to publication of results needed to be improved to realize the full impact of computational aerodynamics. Therefore, the NAS Program has been structured to focus on the development of a complete system that can be upgraded periodically with minimum impact on the user and on the inventory of applications software. The implementation phase of the program is now under way. It is based upon nearly 8 yr of study and should culminate in an initial operational capability before 1986. The objective of this paper is fivefold: 1) to discuss the factors motivating the NAS program, 2) to provide a history of the activity, 3) to describe each of the elements of the processing-system network, 4) to outline the proposed allocation of time to users of the facility, and 5) to describe some of the candidate problems being considered for the first benchmark codes

  1. Cognitive task load analysis : Allocating tasks and designing support

    NARCIS (Netherlands)

    Neerincx, M.A.

    2003-01-01

    We present a method for Cognitive Task Analysis that guides the early stages of software development, aiming at an optimal cognitive load for operators of process control systems. The method is based on a practical theory of cognitive task load and support. In addition to the classical measure

  2. Hybrid task priority-based motion control of a redundant free-floating space robot

    Directory of Open Access Journals (Sweden)

    Cheng ZHOU

    2017-12-01

    Full Text Available This paper presents a novel hybrid task priority-based motion planning algorithm of a space robot. The satellite attitude control task is defined as the primary task, while the least-squares-based non-strict task priority solution of the end-effector plus the multi-constraint task is viewed as the secondary task. Furthermore, a null-space task compensation strategy in the joint space is proposed to derive the combination of non-strict and strict task-priority motion planning, and this novel combination is termed hybrid task priority control. Thus, the secondary task is implemented in the primary task’s null-space. Besides, the transition of the state of multiple constraints between activeness and inactiveness will only influence the end-effector task without any effect on the primary task. A set of numerical experiments made in a real-time simulation system under Linux/RTAI shows the validity and feasibility of the proposed methodology. Keywords: Base attitude control, Hybrid task-priority, Motion planning, Multiple constraints, Redundant space robot

  3. Correlates of academic procrastination: discomfort, task aversiveness, and task capability.

    Science.gov (United States)

    Milgram, N; Marshevsky, S; Sadeh, C

    1995-03-01

    The relationships among five aspects of academic procrastination--behavioral delay, personal upset about the delay, task aversiveness, task capability, and the desire to reduce behavioral delay--were investigated in 10th-grade Israeli students (N = 195). Upset about delay was weakly related to delay itself, and--unlike delay--was strongly related to perceived capability to perform academic tasks and to the desire to change delaying behavior. Students delayed more on academic tasks labeled unpleasant than pleasant, were neutral in between, and were correspondingly more upset about the former than the latter. They more frequently acknowledged reasons for academic procrastination that were less threatening to their self-image (e.g., problems in time management) than reasons that were more threatening (e.g., lack of ability). Interest in reducing delay is related more to self-perceived ability to handle tasks than to time spent procrastinating or reasons given for procrastinating.

  4. Do romantic partners' responses to entry dyspareunia affect women's experience of pain? The roles of catastrophizing and self-efficacy.

    Science.gov (United States)

    Lemieux, Ashley J; Bergeron, Sophie; Steben, Marc; Lambert, Bernard

    2013-09-01

    Entry dyspareunia is a sexual health concern which affects about 21% of women in the general population. Characterized by pain provoked during vaginal penetration, introital dyspareunia has been shown by controlled studies to have a negative impact on the psychological well-being, sexual function, sexual satisfaction, and quality of life of afflicted women. Many cognitive and affective variables may influence the experience of pain and associated psychosexual problems. However, the role of the partner's cognitive responses has been studied very little. The aim of the present study was to examine the associations between partners' catastrophizing and their perceptions of women's self-efficacy at managing pain on one side and women's pain intensity, sexual function, and sexual satisfaction on the other. One hundred seventy-nine heterosexual couples (mean age for women = 31, SD = 10.0; mean age for men = 33, SD = 10.6) in which the woman suffered from entry dyspareunia participated in the study. Both partners completed quantitative measures. Women completed the Pain Catastrophizing Scale and the Painful Intercourse Self-Efficacy Scale. Men completed the significant-other versions of these measures. Dependent measures were women's responses to (i) the Pain Numeric Visual Analog Scale; (ii) the Female Sexual Function Index; and (iii) the Global Measure of Sexual Satisfaction scale. Controlled for women's pain catastrophizing and self-efficacy, results indicate that higher levels of partner-perceived self-efficacy and lower levels of partner catastrophizing are associated with decreased pain intensity in women with entry dyspareunia, although only partner catastrophizing contributed unique variance. Partner-perceived self-efficacy and catastrophizing were not significantly associated with sexual function or satisfaction in women. The findings suggest that partners' cognitive responses may influence the experience of entry dyspareunia for women, pointing

  5. The Effect of Background Music and Background Noise on the Task Performance of Introverts and Extraverts

    Science.gov (United States)

    Cassidy, Gianna; MacDonald, Raymond A. R.

    2007-01-01

    The study investigated the effects of music with high arousal potential and negative affect (HA), music with low arousal potential and positive affect (LA), and everyday noise, on the cognitive task performance of introverts and extraverts. Forty participants completed five cognitive tasks: immediate recall, free recall, numerical and delayed…

  6. Nuclear power plant personnel qualifications and training: TAPS: the task analysis profiling system. Volume 2

    International Nuclear Information System (INIS)

    Jorgensen, C.C.

    1985-06-01

    This report discusses an automated task analysis profiling system (TAPS) designed to provide a linking tool between the behaviors of nuclear power plant operators in performing their tasks and the measurement tools necessary to evaluate their in-plant performance. TAPS assists in the identification of the entry-level skill, knowledge, ability and attitude (SKAA) requirements for the various tasks and rapidly associates them with measurement tests and human factors principles. This report describes the development of TAPS and presents its first demonstration. It begins with characteristics of skilled human performance and proceeds to postulate a cognitive model to formally describe these characteristics. A method is derived for linking SKAA characteristics to measurement tests. The entire process is then automated in the form of a task analysis computer program. The development of the program is detailed and a user guide with annotated code listings and supporting test information is provided

  7. Design and Simulation Tools for Planetary Atmospheric Entry Vehicles, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Atmospheric entry is one of the most critical phases of flight during planetary exploration missions. During the design of an entry vehicle, experimental and...

  8. Analysis of user equilibrium for staggered shifts in a single-entry traffic corridor with no late arrivals

    Science.gov (United States)

    Li, Chuan-Yao; Huang, Hai-Jun; Tang, Tie-Qiao

    2017-05-01

    In this paper, we investigate the effects of staggered shifts on the user equilibrium (UE) state in a single-entry traffic corridor with no late arrivals from the analytical and numerical perspective. The LWR (Lighthill-Whitham-Richards) model and the Greenshields' velocity-density function are used to describe the dynamic properties of traffic flow. Propositions for the properties of flow patterns in UE, and the quasi-analytic solutions for three possible situations in UE are deduced. Numerical tests are carried out to testify the analytical results, where the three-dimensional evolution diagram of traffic flow illustrates that shock and rarefaction wave exist in UE and the space-time diagram indicates that UE solutions satisfy the propagation properties of traffic flow. In addition, the cost curves show that the UE solutions satisfy the UE trip-timing condition.

  9. Promoting Broad and Stable Improvements in Low-Income Children's Numerical Knowledge through Playing Number Board Games

    Science.gov (United States)

    Ramani, Geetha B.; Siegler, Robert S.

    2008-01-01

    Theoretical analyses of the development of numerical representations suggest that playing linear number board games should enhance young children's numerical knowledge. Consistent with this prediction, playing such a game for roughly 1 hr increased low-income preschoolers' (mean age = 5.4 years) proficiency on 4 diverse numerical tasks: numerical…

  10. Neural correlates of the numerical distance effect in children

    Directory of Open Access Journals (Sweden)

    Christophe eMussolin

    2013-10-01

    Full Text Available In number comparison tasks, the performance is better when the distance between the two numbers to compare increases. During development this so-called numerical distance effect decreases with age and the neuroanatomical correlates of these age-related changes are poorly known. Using functional magnetic resonance imaging, we recorded the brain activity changes in children aged from 8 to 14 years while they performed a number comparison task on pairs of Arabic digits and a control colour comparison task on non-numerical symbols. On the one hand, we observed developmental changes in the recruitment of frontal regions and the left intraparietal sulcus, with lower activation as the age increased. On the other hand, we found that a behavioural index of selective sensitivity to the numerical distance effect was positively correlated with higher brain activity in a right lateralized occipito-temporo-parietal network including the intraparietal sulcus. This leads us to propose that the left intraparietal sulcus would be engaged in the refinement of cognitive processes involved in number comparison during development, while the right intraparietal sulcus would underlie the semantic representation of numbers and its activation would be mainly affected by the numerical proximity between them.

  11. Designing for dynamic task allocation

    NARCIS (Netherlands)

    Dongen, van K.; Maanen, van P.P.

    2005-01-01

    Future platforms are envisioned in which human-machine teams are able to share and trade tasks as demands in situations change. It seems that human-machine coordination has not received the attention it deserves by past and present approaches to task allocation. In this paper a simple way to make

  12. Scheduling periodic tasks with slack

    NARCIS (Netherlands)

    Korst, J.H.M.; Aarts, E.H.L.; Lenstra, J.K.

    1997-01-01

    We consider the problem of nonpreemptively scheduling periodic tasks on a minimum number of identical processors, assuming that some slack is allowed in the time between successive executions of a periodic task. We prove that the problem is NP-hard in the strong sense. Necessary and sufficient

  13. Financial Inclusion, Entry Barriers, and Entrepreneurship: Evidence from China

    Directory of Open Access Journals (Sweden)

    Zhaobin Fan

    2017-02-01

    Full Text Available This paper aims at investigating the relationship between financial inclusion and the formation of entrepreneurs, both theoretically and empirically. We first construct a theoretical model to examine how the development of financial inclusion affects the formation of entrepreneurs. The model suggests that the development of financial inclusion can mitigate credit constraints on entrepreneurial activities by reducing information asymmetry in financial transactions, and in addition this effect is greater in industries with lower barriers to entry. Then, using data from 31 provinces and 19 industries in China during the period 2005–2014, we test the impact of financial inclusion on the formation of entrepreneurs. The estimation results confirm the positive effect of financial inclusion development on the formation of entrepreneurs, and indicate that this effect is heterogeneous across industries. Moreover, the development of financial inclusion is often beneficial to the formations of entrepreneurs in sectors with lower entry barriers.

  14. Radio/FADS/IMU integrated navigation for Mars entry

    Science.gov (United States)

    Jiang, Xiuqiang; Li, Shuang; Huang, Xiangyu

    2018-03-01

    Supposing future orbiting and landing collaborative exploration mission as the potential project background, this paper addresses the issue of Mars entry integrated navigation using radio beacon, flush air data sensing system (FADS), and inertial measurement unit (IMU). The range and Doppler information sensed from an orbiting radio beacon, the dynamic pressure and heating data sensed from flush air data sensing system, and acceleration and attitude angular rate outputs from an inertial measurement unit are integrated in an unscented Kalman filter to perform state estimation and suppress the system and measurement noise. Computer simulations show that the proposed integrated navigation scheme can enhance the navigation accuracy, which enables precise entry guidance for the given Mars orbiting and landing collaborative exploration mission.

  15. Targeted steam injection using horizontal wells with limited entry perforations

    Energy Technology Data Exchange (ETDEWEB)

    Boone, T. J.; Youck, D. G.; Sun, S. [Imperial Oil Resources, Calgary, AB (Canada)

    1998-12-31

    An experimental horizontal well using limited-entry perforations as a method for distributing steam to different zones was used to replace ten vertical injection wells. The well was located between rows of vertical wells in a reservoir that has been subjected to more than ten years of operation under cyclic steam stimulation. The limited-entry perforations enabled steam to be targeted at the cold regions of the reservoir. This paper presents an assessment of the well based on theoretical calculations, measured injection pressures and rates and 3-D seismic imaging. All the data collected during the experiment support the conclusion that effective steam distribution along the well has been achieved. It was also concluded that this technology has significant potential for SAGD applications as a mechanism for achieving improved steam distribution at a much reduced cost. 5 refs., 8 figs.

  16. Data entry system for INIS input using a personal computer

    International Nuclear Information System (INIS)

    Ishikawa, Masashi

    1990-01-01

    Input preparation for the INIS (International Nuclear Information System) has been performed by Japan Atomic Energy Research Institute since 1970. Instead of the input data preparation done by worksheets make out with the typewriters, new method with which data can be directly inputted into a diskette using personal computers is introduced. According to the popularization of personal computers and word processors, this system is easily applied to other system, so the outline and the future development on it are described. A shortcoming of this system is that spell-checking and data entry using authority files are hardly performed because of the limitation of hardware resources, and that data code conversion is needed because applied code systems between personal computer and main frame computer are quite different from each other. On the other hand, improving the timelyness of data entry is expected without duplication of keying. (author)

  17. Is parotid saliva sterile on entry to the oral cavity?

    DEFF Research Database (Denmark)

    Schrøder, Stine A; Bardow, Allan; Eickhardt-Dalbøge, Steffen

    2017-01-01

    CONCLUSION: The present study indicates that parotid saliva is sterile on entry to the oral cavity. OBJECTIVES: The objective was to investigate if parotid saliva is sterile on entry to the oral cavity and, thus, prior to contamination by oral bacteria. METHOD: Forty healthy volunteers were...... included in sterile parotid saliva collection. Parotid saliva was collected using a sterile Lashley cup, placed over the papilla of the Stensen´s duct, as well as sterile tubes and syringes for collection. All collections were followed by collection of a positive control sample where some of the sterile...... obtained parotid saliva had been exposed to the contralateral mucosal membranes. All samples parotid saliva, as well as the positive controls, were cultivated, and 10 randomly selected parotid saliva samples underwent polymerase chain reaction (PCR) analyses. RESULTS: In 33 of 40 parotid saliva samples...

  18. HIV/AIDS testing at ports of entry in China.

    Science.gov (United States)

    Lai, Dejian; Hwang, Lu-Yu; Beasley, R Palmer

    2011-05-01

    In 2007 the Chinese government issued regulations requiring HIV/AIDS testing for Chinese citizens returning at ports of entry if they had resided outside China for 1 year or longer. Three years after publication and partial implementation of the regulations, the Chinese government decided to eliminate compulsory HIV/AIDS testing of returning Chinese. We examine the history of China's HIV/AIDS testing regulations on entry-exit populations, showing how China has gradually altered its policy. As of December 2010, the policy of compulsory HIV/AIDS testing of returning Chinese has been abandoned; however, the regulations still compel HIV/AIDS testing for other groups inside China. Our review sheds new light on the dynamics of regulatory changes in the last 3 years. The Chinese experience that we observed may provide useful insights for policymakers in other parts of the world.

  19. Computerized provider order entry in the clinical laboratory

    Science.gov (United States)

    Baron, Jason M.; Dighe, Anand S.

    2011-01-01

    Clinicians have traditionally ordered laboratory tests using paper-based orders and requisitions. However, paper orders are becoming increasingly incompatible with the complexities, challenges, and resource constraints of our modern healthcare systems and are being replaced by electronic order entry systems. Electronic systems that allow direct provider input of diagnostic testing or medication orders into a computer system are known as Computerized Provider Order Entry (CPOE) systems. Adoption of laboratory CPOE systems may offer institutions many benefits, including reduced test turnaround time, improved test utilization, and better adherence to practice guidelines. In this review, we outline the functionality of various CPOE implementations, review the reported benefits, and discuss strategies for using CPOE to improve the test ordering process. Further, we discuss barriers to the implementation of CPOE systems that have prevented their more widespread adoption. PMID:21886891

  20. Computerized provider order entry in the clinical laboratory

    Directory of Open Access Journals (Sweden)

    Jason M Baron

    2011-01-01

    Full Text Available Clinicians have traditionally ordered laboratory tests using paper-based orders and requisitions. However, paper orders are becoming increasingly incompatible with the complexities, challenges, and resource constraints of our modern healthcare systems and are being replaced by electronic order entry systems. Electronic systems that allow direct provider input of diagnostic testing or medication orders into a computer system are known as Computerized Provider Order Entry (CPOE systems. Adoption of laboratory CPOE systems may offer institutions many benefits, including reduced test turnaround time, improved test utilization, and better adherence to practice guidelines. In this review, we outline the functionality of various CPOE implementations, review the reported benefits, and discuss strategies for using CPOE to improve the test ordering process. Further, we discuss barriers to the implementation of CPOE systems that have prevented their more widespread adoption.