People transfer-sinequanon for nuclear technology transfer

International Nuclear Information System (INIS)

Ahmed, M.

1977-01-01

The main obstacles facing the developing countries which wish to adopt sophisticated nuclear technology can be the following: lack of trained personnel, lack of entrepreneurs and capital, and bureaucracy. Of these the greatest problem is undoubtedly the lack of trained manpower. Urgently required skilled manpower may be obtained through training of selected persons in foreign countries on a crash program of nuclear energy. Exchange of expertise can also take place among the developing countries themselves. Another problem particularly peculiar to the poor developing countries is the lack of entrepreneurs and capital. It therefore becomes necessary to attract entrepreneurs from abroad with all the benefit of managerial know-how and capital transfer that it entails. Exchange of scientist, teachers, managerial and administrative personnel between the developed and developing countries and also among the developing countries themselves is therefore essential for an effective transfer of nuclear technology

Pakistan's experience in transfer of nuclear technology

International Nuclear Information System (INIS)

Ahmad Khan, Nunir

1977-01-01

Of all technologies, nuclear technology is perhaps the most interdisciplinary in character as it encompasses such varied fields as nuclear physics, reactor physics, mechanical, electrical electronics controls, metallurgical and even civil and geological engineering. When we speak of transfer of acquisition of nuclear technology we imply cumulative know-how in many fields, most of which are not nuclear per se but are essential for building the necessry infrastructure and back-up facilities for developing and implementing any nuclear energy program. In Pakistan, efforts on utilization of nuclear energy for peaceful applications were initiated about twenty years ago. During these years stepwise development of nuclear technology has taken place. The experience gained by Pakistan so far in transfer of nuclear technology is discussed. Suggestions have been made for continuing the transfer of this most essential technology from the advanced to the developing countries while making sure that necessary safeguard requirements are fullfilled

Technology transfer from Canadian nuclear laboratories

International Nuclear Information System (INIS)

MacDonald, R.D.; Evans, W.; MacEwan, J.R.; Melvin, J.G.

1985-09-01

Canada has developed a unique nuclear power system, the CANDU reactor. AECL - Research Company (AECL-RC) has played a key role in the CANDU program by supplying its technology to the reactor's designers, constructors and operators. This technology was transferred from our laboratories to our sister AECL companies and to domestic industries and utilities. As CANDUs were built overseas, AECL-RC made its technology available to foreign utilities and agencies. Recently the company has embarked on a new transfer program, commercial R and D for nuclear and non-nuclear customers. During the years of CANDU development, AECL-RC has acquired the skills and technology that are especially valuable to other countries embarking on their own nuclear programs. This report describes AECL-RC's thirty years' experience with the transfer of technology

The transfer of nuclear technology: necessities and limitations

International Nuclear Information System (INIS)

Haunschild, H.-H.

1978-01-01

Political and economical importance of the transfer of nuclear technologies to less developed countries is examined. Energy needs of the world create the necessity of technology transfer. Three levels are distinguished: 1) Basic elements of cooperation are agreed between the two Governments, 2) scientific cooperation and 3) industrial cooperation. Technology transfer is more than mere technology export. Limitations of nuclear technology transfer are: the lack of infrastructure, the high price of a nuclear power station but above all the problem of proliferation. In conclusion the solution of international problems of nuclear energy is the concept of cooperation on the basis of equal rights

Success in nuclear technology transfer: A Canadian perspective

International Nuclear Information System (INIS)

Lawson, D.S.; Stevens, J.E.S.; Boulton, J.

1986-10-01

Technology transfer has played a significant part in the expansion of nuclear power to many countries of the world. Canada's involvement in nuclear technology transfer spans four decades. The experience gained through technology transfer, initially to Canadian industry and then to other countries in association with the construction of CANDU nuclear power plants, forms a basis from which to assess the factors which contribute to successful technology transfer. A strong commitment from all parties, in terms of both financial and human resources, is essential to success. Detailed planning of both the scope and timing of the technology transfer program is also required together with an assessment of the impact of the introduction of nuclear power on other sectors of the economy. (author)

In vitro manipulation techniques of porcine embryos: a meta-analysis related to transfers, pregnancies and piglets.

Science.gov (United States)

Liu, Ying; Li, Juan; Løvendahl, Peter; Schmidt, Mette; Larsen, Knud; Callesen, Henrik

2015-03-01

During the last 17 years, considerable advancements have been achieved in the production of pigs, transgenic and non-transgenic, by methods of somatic cell nuclear transfer, in vitro fertilisation, intracytoplasmic sperm injection, microinjection and sperm-mediated gene transfer by artificial insemination. Therefore, a review of the overall efficiency for the developmental competence of embryos produced by these in vitro methods would be useful in order to obtain a more thorough overview of this growing area with respect to its development and present status. In this review a meta-analysis was used to analyse data collected from all published articles with a focus on zygotes and embryos for transfer, pregnancy, full-term development and piglets born. It was generally concluded that an increasing level of in vitro manipulation of porcine embryos decreased the overall efficiency for production of piglets. The techniques of nuclear transfer have been developed markedly through the increasing number of studies performed, and the results have become more stable. Prolonged in vitro culture period did not lead to any negative effect on nuclear transfer embryos after their transfer and it resulted in a similar or even higher litter size. More complete information is needed in future scientific articles about these in vitro manipulation techniques to establish a more solid basis for the evaluation of their status and to reveal and further investigate any eventual problems.

The applications of nuclear techniques in nuclear medicine

International Nuclear Information System (INIS)

Zhao Huiyang

1986-01-01

There are a great deal of advanced techniques in nuclear medicine imaging, because many recent achivements of nuclear techniques have been applied to medicine in recent years. This paper presents the effects of nuclear techniques in development of nuclear medicine imaging. The first part describes radiopharmaceuticals and nuclear medicine imaging including commonly used 99m Tc labeled agents and cyclotron produced radionuclides for organ imaging. The second part describes nuclear medicine instrucments, including PECT, SPECT, MRI ect.; and discussions on the advantages, disadvantages and present status

Nucleolar ultrastructure in bovine nuclear transfer embryos

DEFF Research Database (Denmark)

Kanka, J; Smith, S D; Soloy, E

1999-01-01

in nuclear morphology as a transformation of the nucleolus precursor body into a functional rRNA synthesising nucleolus with a characteristic ultrastructure. We examined nucleolar ultrastructure in bovine in vitro produced (control) embryos and in nuclear transfer embryos reconstructed from a MII phase...... at 1 hr after fusion and, by 3 hr after fusion, it was restored again. At this time, the reticulated fibrillo-granular nucleolus had an almost round shape. The nucleolar precursor body seen in the two-cell stage nuclear transfer embryos consisted of intermingled filamentous components and secondary...... time intervals after fusion. In the two-cell stage nuclear transfer embryo, the originally reticulated nucleolus of the donor blastomere had changed into a typical nucleolar precursor body consisting of a homogeneous fibrillar structure. A primary vacuole appeared in the four-cell stage nuclear...

Modularization and nuclear power. Report by the Technology Transfer Modularization Task Team

International Nuclear Information System (INIS)

1985-06-01

This report describes the results of the work performed by the Technology Transfer Task Team on Modularization. This work was performed as part of the Technology Transfer work being performed under Department of Energy Contract 54-7WM-335406, between December, 1984 and February, 1985. The purpose of this task team effort was to briefly survey the current use of modularization in the nuclear and non-nuclear industries and to assess and evaluate the techniques available for potential application to nuclear power. A key conclusion of the evaluation was that there was a need for a study to establish guidelines for the future development of Light Water Reactor, High Temperature Gas Reactor and Liquid Metal Reactor plants. The guidelines should identify how modularization can improve construction, maintenance, life extension and decommissioning

Nuclear energy technology transfer: the security barriers

International Nuclear Information System (INIS)

Rinne, R.L.

1975-08-01

The problems presented by security considerations to the transfer of nuclear energy technology are examined. In the case of fusion, the national security barrier associated with the laser and E-beam approaches is discussed; for fission, the international security requirements, due to the possibility of the theft or diversion of special nuclear materials or sabotage of nuclear facilities, are highlighted. The paper outlines the nuclear fuel cycle and terrorist threat, examples of security barriers, and the current approaches to transferring technology. (auth)

Nuclear techniques in hydrology

International Nuclear Information System (INIS)

Moser, H.

1976-01-01

The nuclear techniques used in hydrology are usually tracer techniques based on the use of nuclides either intentionally introduced into, or naturally present in the water. The low concentrations of these nuclides, which must be detected in groundwater and surface water, require special measurement techniques for the concentrations of radioactive or of stable nuclides. The nuclear techniques can be used most fruitfully in conjunction with conventional methods for the solution of problems in the areas of hydrology, hydrogeology and glacier hydrology. Nuclear techniques are used in practice in the areas of prospecting for water, environment protection and engineering hydrogeology. (orig.) [de

Proliferative lifespan is conserved after nuclear transfer.

Science.gov (United States)

Clark, A John; Ferrier, Patricia; Aslam, Samena; Burl, Sarah; Denning, Chris; Wylie, Diana; Ross, Arlene; de Sousa, Paul; Wilmut, Ian; Cui, Wei

2003-06-01

Cultured primary cells exhibit a finite proliferative lifespan, termed the Hayflick limit. Cloning by nuclear transfer can reverse this cellular ageing process and can be accomplished with cultured cells nearing senescence. Here we describe nuclear transfer experiments in which donor cell lines at different ages and with different proliferative capacities were used to clone foetuses and animals from which new primary cell lines were generated. The rederived lines had the same proliferative capacity and rate of telomere shortening as the donor cell lines, suggesting that these are innate, genetically determined, properties that are conserved by nuclear transfer.

Transferring nuclear knowledge - An international partnership

International Nuclear Information System (INIS)

Badawy, I.I.

2007-01-01

Full text: The fast decrease of coal, oil and natural gas as energy resources is pushing the world towards the use of nuclear energy. The expectation of growth in the nuclear field seems to be a great challenge -specially- in developing countries which are in hard need of acquiring nuclear knowledge and nuclear technology as well. In this situation, various factors would have great influence on the implementation of nuclear projects -in particular- for electricity generation. As a matter of fact, it is essential for each country to have its own strategy for national development. In practice, the implementation of such a strategy would need the collective efforts of specialized and efficient human resources for executing the tasks. This would need cooperation with, and/or technical aid of developed countries and international organizations. There are various parameters that may contribute in the national development in a country, the most important of which are the development in science and technology. Then, the industrial development becomes essential for the nuclear industry. In order to achieve this, the information acquiring and knowledge transfer are fundamental tools. The partnership between developed and developing countries would mean cooperation and aid directed to nuclear technology and knowledge transfer; and specialized technical training in the nuclear industry. Supplier countries might need to use high technology in implementing nuclear safeguards commitments, but with minimum side effects. This paper investigates some factors that may have influence on transferring peaceful uses of nuclear knowledge and/or nuclear technology; such as establishing and sustaining the national nuclear workforce, building of public understanding and public acceptance of nuclear science and technology. Also, it discusses the importance of activating and strengthening the international regime of partnership for the welfare and prosperity of human kind; with specific

Transfer of Canadian nuclear regulatory technology

International Nuclear Information System (INIS)

Harvie, J.D.

1985-10-01

This paper discusses the Canadian approach to the regulation of nuclear power reactors, and its possible application to CANDU reactors in other countries. It describes the programs which are in place to transfer information on licensing matters to egulatory agencies in other countries, and to offer training on nuclear safety regulation as it is practised in Canada. Experience to date in the transfer of regulatory technology is discussed. 5 refs

Legal aspects of the transfer of nuclear technology

International Nuclear Information System (INIS)

Sartorelli, C.

1980-03-01

The paper stresses the importance of nuclear technology transfer and describes the legal instruments for transfer of technical and scientific technology, particularly from the contractual viewpoint. A description follows of the setting-up of national joint ventures for nuclear power plant projects with emphasis on technological know-how to enable operation of plants in compliance with safety standards. The possibility is discussed of the export of nuclear technology, and finally mention is made of a proposal for a 'code of conduct' on such transfers in the framework of the United Nations, having regard to the 'London agreements' on nuclear exports. (NEA) [fr

Robust techniques for polarization and detection of nuclear spin ensembles

Science.gov (United States)

Scheuer, Jochen; Schwartz, Ilai; Müller, Samuel; Chen, Qiong; Dhand, Ish; Plenio, Martin B.; Naydenov, Boris; Jelezko, Fedor

2017-11-01

Highly sensitive nuclear spin detection is crucial in many scientific areas including nuclear magnetic resonance spectroscopy, magnetic resonance imaging (MRI), and quantum computing. The tiny thermal nuclear spin polarization represents a major obstacle towards this goal which may be overcome by dynamic nuclear spin polarization (DNP) methods. The latter often rely on the transfer of the thermally polarized electron spins to nearby nuclear spins, which is limited by the Boltzmann distribution of the former. Here we utilize microwave dressed states to transfer the high (>92 % ) nonequilibrium electron spin polarization of a single nitrogen-vacancy center (NV) induced by short laser pulses to the surrounding 13C carbon nuclear spins. The NV is repeatedly repolarized optically, thus providing an effectively infinite polarization reservoir. A saturation of the polarization of the nearby nuclear spins is achieved, which is confirmed by the decay of the polarization transfer signal and shows an excellent agreement with theoretical simulations. Hereby we introduce the polarization readout by polarization inversion method as a quantitative magnetization measure of the nuclear spin bath, which allows us to observe by ensemble averaging macroscopically hidden polarization dynamics like Landau-Zener-Stückelberg oscillations. Moreover, we show that using the integrated solid effect both for single- and double-quantum transitions nuclear spin polarization can be achieved even when the static magnetic field is not aligned along the NV's crystal axis. This opens a path for the application of our DNP technique to spins in and outside of nanodiamonds, enabling their application as MRI tracers. Furthermore, the methods reported here can be applied to other solid state systems where a central electron spin is coupled to a nuclear spin bath, e.g., phosphor donors in silicon and color centers in silicon carbide.

Development of nuclear technology transfer - Korea as a recipient

International Nuclear Information System (INIS)

Sung, N.C.

1988-01-01

Korea, as a recipient of nuclear technology transfer, has good experience of progressively building up its indigenous capability of nuclear technology through three stages of technology transfer, namely: technology transfer under the turn-key approach, component approach, and integrated technology transfer with a local prime contractor. Here, each stage of experience of technology transfer, with Korea as a recipient, is presented

JAERI Nuclear Engineering School and technology transfer

International Nuclear Information System (INIS)

Nishimura, Kazuaki; Kawaguchi, Chiyoji

1978-01-01

A method is introduced to evaluate the degree of nuclear technology transfer; that is, the output powers of Japanese nuclear reactors constructed in these 20 years are chronologically plotted in a semi-log figure. All reactors plotted are classified into imported and domestic ones according to a value of domestication factor. A space between two historical trajectories of reactor construction may be interpreted as one of the measures indicating the degree of nuclear technology transfer. In connection with this method, historical change of educational and training courses in Nuclear Engineering School of Japan Atomic Energy Research Institute is reviewed in this report. (author)

Transfer of nuclear technology from Spain

International Nuclear Information System (INIS)

Madrid, G.

1985-01-01

Technology transfer from Spain is possible in several fields of nuclear technology ranging from the head end of the fuel cycle (ENUSA) to the back end (ENRESA). The advantages of such a transfer are emphasized

An Effective Method For Nuclear Technology Transfer

International Nuclear Information System (INIS)

Jeon, Jan Pung

1987-01-01

Three basic entities involved in the implementation of nuclear projects are the Owner, Regulatory Authority and Nuclear Industry. Their ultimate objective is to secure the safe, reliable and economical nuclear energy. For s successful nuclear power program, the owner should maintain a good relationship with the other entities and pursue an optimization of the objectives. On the other hand, he should manage projects along the well - planned paths in order to effectively learn the nuclear technology. One of the problems in the nuclear projects of developing countries was the absence of long - term technology development program, a limited local participation and the technical incapability. For the effective technology transfer, a motivation of the technology supplier and a readiness of the recipient to accommodate such technologies are required. Advanced technology is usually developed at considerable expense with the expectation that the developer will use it in furthering his own business. Therefore, he tends to be reluctant to transfer it to the others, particularly, to the potential competitors. There is a disinclination against further technology transfer beyond the minimum contractual obligation or the requirements by Government Regulatory. So, an additional commercial incentive must be provided to the developer

Method for somatic cell nuclear transfer in zebrafish.

Science.gov (United States)

Siripattarapravat, Kannika; Cibelli, Jose B

2011-01-01

Somatic cell nuclear transfer (SCNT) has been a well-known technique for decades and widely applied to generate identical animals, including ones with genetic alterations. The system has been demonstrated successfully in zebrafish. The elaborated requirements of SCNT, however, limit reproducibility of the established model to a few groups in zebrafish research community. In this chapter, we meticulously outline each step of the published protocol as well as preparations of equipments and reagents used in zebrafish SCNT. All describable detailed-tips are elaborated in texts and figures. Copyright © 2011 Elsevier Inc. All rights reserved.

Nuclear technology transfer adapted to the needs of developing countries

International Nuclear Information System (INIS)

Martin, A.; Nentwich, D.

1983-01-01

The paper explains the build-up of nuclear know-how in the Federal Republic of Germany after 1955, when activities in the nuclear field became permitted. Furthermore, it shows the development of nuclear technology transfer via the increasing number of nuclear power plants exported. The inevitable interrelationship between the efficient transfer of know-how and long-term nuclear co-operation is demonstrated. Emphasis is put on the adaptation of nuclear technology transfer to the needs of the recipient countries. Guidelines to achieve the desired goal are given. (author)

International nuclear technology transfer

International Nuclear Information System (INIS)

Cartwright, P.; Rocchio, J.P.

1978-01-01

Light water reactors (LWRs), originally developed in the United States, became the nuclear workhorses for utilities in Europe and Japan largely because the U.S. industry was willing and able to transfer its nuclear know-how abroad. In this international effort, the industry had the encouragement and support of the U.S. governement. In the case of the boiling water reactor (BWR) the program for technology transfer was developed in response to overseas customer demands for support in building local designs and manufacturing capabilities. The principal vehicles have been technology exchange agreements through which complete engineering and manufacturing information is furnished covering BWR systems and fuel. Agreements are held with companies in Germany, Japan, Italy, and Sweden. In recent years, a comprehensive program of joint technology development with overseas manufacturers has begun. The rapidly escalating cost of nuclear research and development make it desirable to minimize duplication of effort. These joint programs provide a mechanism for two or more parties jointly to plan a development program, assign work tasks among themselves, and exchange test results. Despite a slower-than-hoped-for start, nuclear power today is playing a significant role in the economic growth of some developing countries, and can continue to do so. Roughly half of the 23 free world nations that have adopted LWRs are developing countries

Heat transfer coefficient testing in nuclear fuel rod bundles with mixing vane grids

International Nuclear Information System (INIS)

Conner, Michael E.; Smith, L. David III; Holloway, Mary V.; Beasley, Donald E.

2005-01-01

An air heat transfer test facility was developed to test the heat transfer downstream of support grids in simulated PWR nuclear fuel rod bundles. The goal of this testing is to study the single-phase heat transfer coefficients downstream of grids with mixing vanes in a square-pitch rod bundle. The technique developed utilizes fully-heated grid spans and a specially designed thermocouple holder that can be moved axially down the rod bundle and aximuthally within a test rod. From this testing, the axial and aximuthally varying heat transfer coefficient can be determined. Different grid designs are tested and compared to determine the heat transfer enhancement associated with key grid features such as mixing vanes. (author)

Ploidy of Bovine Nuclear Transfer Blastocysts Blastomere Donors

DEFF Research Database (Denmark)

Booth, P J; VIUFF, D; THOMSEN, P D

2000-01-01

The higher rate of embryonic loss in nuclear transfer compared to in vitro produced embryos may be due to chromosome abnormalities that occur during preimplantation in vitro devel- opment. Because little is known about ploidy errors in nuclear transfer embryos, this was ex- amined using embryos...... cultured until day 7 at which time blastocyst nuclei were extracted and chromosome abnormalities were evaluated by fluorescent in situ hybridization using two probes that bind to the subcentromeric regions on chromosomes 6 and 7. In 16 nuclear transfer blastocysts generated from 5 donor embryos, 53.8 6 20...... comprised mainly triploid (8.2 6 10.3 [0–26.3]: SD [range]) and tetraploid (10.6 6 19.9 [0–54.9]) nuclei with other ploidy com- binations accounting for only 0.9 6 2.1 [0–2.1]% of deviant nuclei. The proportion of com- pletely normal nuclear transfer embryos was no less than those produced by in vitro...

Informationization nuclear apparatus communication technique

International Nuclear Information System (INIS)

Yu Tiqi; Fang Zongliang; Wen Qilin

2006-01-01

The paper explains the request of communication ability in nuclear technique application area. Based on the actuality of nuclear apparatus communication ability, and mainly combining with the development of communication technique, the authors analyzes the application trend of communication technique applying in nuclear apparatus, for the apparatus and system needing communication ability, they need selecting suitable communication means to make them accomplish the task immediately and effectively. (authors)

Heat Transfer Enhancement By Three-Dimensional Surface Roughness Technique In Nuclear Fuel Rod Bundles

Science.gov (United States)

Najeeb, Umair

This thesis experimentally investigates the enhancement of single-phase heat transfer, frictional loss and pressure drop characteristics in a Single Heater Element Loop Tester (SHELT). The heater element simulates a single fuel rod for Pressurized Nuclear reactor. In this experimental investigation, the effect of the outer surface roughness of a simulated nuclear rod bundle was studied. The outer surface of a simulated fuel rod was created with a three-dimensional (Diamond-shaped blocks) surface roughness. The angle of corrugation for each diamond was 45 degrees. The length of each side of a diamond block is 1 mm. The depth of each diamond block was 0.3 mm. The pitch of the pattern was 1.614 mm. The simulated fuel rod had an outside diameter of 9.5 mm and wall thickness of 1.5 mm and was placed in a test-section made of 38.1 mm inner diameter, wall thickness 6.35 mm aluminum pipe. The Simulated fuel rod was made of Nickel 200 and Inconel 625 materials. The fuel rod was connected to 10 KW DC power supply. The Inconel 625 material of the rod with an electrical resistance of 32.3 kO was used to generate heat inside the test-section. The heat energy dissipated from the Inconel tube due to the flow of electrical current flows into the working fluid across the rod at constant heat flux conditions. The DI water was employed as working fluid for this experimental investigation. The temperature and pressure readings for both smooth and rough regions of the fuel rod were recorded and compared later to find enhancement in heat transfer coefficient and increment in the pressure drops. Tests were conducted for Reynold's Numbers ranging from 10e4 to 10e5. Enhancement in heat transfer coefficient at all Re was recorded. The maximum heat transfer co-efficient enhancement recorded was 86% at Re = 4.18e5. It was also observed that the pressure drop and friction factor increased by 14.7% due to the increased surface roughness.

Experience in transfer of nuclear technology

International Nuclear Information System (INIS)

Beckurts, K.H.

1977-01-01

Nuclear energy development in the Federal Republic of Germany was initiated in 1955. In spite of this late start, the country now has a broad potential in all branches of peaceful nuclear technology. Turkey nuclear power plants are erected by German industry, and the country has the basic technology at its disposal for all stages of the nuclear fuel cycle. In the areas of uranium enrichment and reprocessing, multilateral joint ventures with European countries have been formed. The country also has an active development program for advanced reactors. In general areas of technology transfer and development aid, in the nuclear field, there are interrelated activities of both government and industry. The government has concluded bilateral agreements with a number of countires e.g. Argentina, Brazil, India, Iran and Pakistan, covering the general field of nuclear science; in the framework of these agreements, which are being carried out mainly by the nuclear research centers at Juelich and Karlsruhe, active cooperation in research, development, education, and training are being pursued. The nonproliferation of nuclear weapons is a major objective of the Federal government which strongly affects its policies for international nuclear trade. The paper describes the nuclear technology potential available in the Federal Republic of Germany and reviews experience gathered in cooperation with developing countries. Future policies for nuclear technology transfer are discussed with special reference to the role of national R and D laboratories

Review of somatic cell nuclear transfer in pig | Muenthaisong ...

African Journals Online (AJOL)

It is now more than 8 years, since the first cloned pig from nuclear transfer was reported. Success of somatic cell nuclear transfer (SCNT) in pig is still low compared to that in bovine. Embryonic and neonatal abnormalities of cloned piglets are probably a result of incorrect or incomplete reprogramming of the transferred ...

Nuclear Medicine and Application of Nuclear Techniques in Medicine

International Nuclear Information System (INIS)

Wiharto, Kunto

1996-01-01

The use of nuclear techniques medicine covers not only nuclear medicine and radiology in strict sense but also determination of body mineral content by neutron activation analysis and x-ray fluorescence technique either in vitro or in vivo, application of radioisotopes as tracers in pharmacology and biochemistry, etc. This paper describes the ideal tracer in nuclear medicine, functional and morphological imaging, clinical aspect and radiation protection in nuclear medicine. Nuclear technique offers facilities and chances related to research activities and services in medicine. The development of diagnostic as well as therapeutic methods using monoclonal antibodies labeled with radioisotope will undoubtedly play an important role in the disease control

Nuclear techniques in analytical chemistry

CERN Document Server

Moses, Alfred J; Gordon, L

1964-01-01

Nuclear Techniques in Analytical Chemistry discusses highly sensitive nuclear techniques that determine the micro- and macro-amounts or trace elements of materials. With the increasingly frequent demand for the chemical determination of trace amounts of elements in materials, the analytical chemist had to search for more sensitive methods of analysis. This book accustoms analytical chemists with nuclear techniques that possess the desired sensitivity and applicability at trace levels. The topics covered include safe handling of radioactivity; measurement of natural radioactivity; and neutron a

Nuclear response functions at large energy and momentum transfer

International Nuclear Information System (INIS)

Bertozzi, W.; Moniz, E.J.; Lourie, R.W.

1991-01-01

Quasifree nucleon processes are expected to dominate the nuclear electromagnetic response function for large energy and momentum transfers, i.e., for energy transfers large compared with nuclear single particle energies and momentum transfers large compared with typical nuclear momenta. Despite the evident success of the quasifree picture in providing the basic frame work for discussing and understanding the large energy, large momentum nuclear response, the limits of this picture have also become quite clear. In this article a selected set of inclusive and coincidence data are presented in order to define the limits of the quasifree picture more quantitatively. Specific dynamical mechanisms thought to be important in going beyond the quasifree picture are discussed as well. 75 refs, 37 figs

Human somatic cell nuclear transfer and cloning.

Science.gov (United States)

2012-10-01

This document presents arguments that conclude that it is unethical to use somatic cell nuclear transfer (SCNT) for infertility treatment due to concerns about safety; the unknown impact of SCNT on children, families, and society; and the availability of other ethically acceptable means of assisted reproduction. This document replaces the ASRM Ethics Committee report titled, "Human somatic cell nuclear transfer (cloning)," last published in Fertil Steril 2000;74:873-6. Copyright © 2012 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Communications Received from Certain Member States Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology. Nuclear Transfers and Nuclear-Related Dual-Use Transfers

International Nuclear Information System (INIS)

1993-04-01

The Director General has received a Note Verbale dated 5 March 1993 from the Ministry of Foreign Affairs of the Slovak Republic. The purpose of the Note Verbale is to provide information on that Governments' guidelines for Nuclear Transfers and for Transfers of of Nuclear-related Dual-use Equipment, Material and Related Technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Note Verbale is annexed hereto [fr

Communications Received from Certain Member States Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology. Nuclear Transfers and Nuclear-Related Dual-Use Transfers

International Nuclear Information System (INIS)

1993-04-01

The Director General has received a Note Verbale dated 5 March 1993 from the Ministry of Foreign Affairs of the Slovak Republic. The purpose of the Note Verbale is to provide information on that Governments' guidelines for Nuclear Transfers and for Transfers of of Nuclear-related Dual-use Equipment, Material and Related Technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Note Verbale is annexed hereto [es

Transfer coefficients in a four-cusp duct simulating a typical nuclear reactor channel degraded by accident

International Nuclear Information System (INIS)

Souza Dutra, A. de.

1985-01-01

An experimental study on forced convection in a four-cusp duct simulating a typical nuclear reactor channel degraded by accident is presented. Transfer coefficients were obtained by using the analogy between heat and mass tranfer, with the naphtalene sublimation technique. The experiment consisted in forcing air past a four-cusp naphthalene moulded duct. Mass transfer coefficients were determined in nondimensional form as Sherwood number. Experimental curves correlating the Sherwood number with a nondimensional length, x + , were obtained for Reynolds number varying from 891 to 30.374. This range covers typical flow rates that are expected to exist in a degraded nuclear reactor core. (Author) [pt

Communications Received from Certain Member States Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology. Nuclear Transfers and Nuclear-Related Dual-Use Transfers

International Nuclear Information System (INIS)

1993-04-01

The Director General has received a Note Ver bale dated 5 March 1993 from the Ministry of Foreign Affairs of the Slovak Republic. The purpose of the Note Ver bale is to provide information on that Governments' guidelines for Nuclear Transfers and for Transfers of of Nuclear-related Dual-use Equipment, Material and Related Technology. In the light of the wish expressed at the end of each Note Ver bale, the text of the Note Ver bale is annexed hereto

Technology transfer assessment in the nuclear agreement Brazil-Germany

International Nuclear Information System (INIS)

Cecchi, J.C.

1985-04-01

The three main arguments utilized in the Nuclear Brazil-Germany Agreement celebrated in 1975 were the following: a) the low Brazilian hydroelectric potential insufficient to attend the increasing of electrical energy demand; b) the low cost of nuclear energy related to hydroelectric energy: c) and finally, the nuclear technology transfer, involving inclusive the fuel cycle and that could permit to Brazil self-sufficiency in the nuclear energy field. Thus, this work intends to describe and discussing the 'technology transfer strategy' trying to understand and showing which are its main characteristics, and also which are the real actuals results. (author) [pt

Use of nuclear techniques for improving livestock production and health in Sri Lanka: A review of studies conducted and strategies for technology transfer

International Nuclear Information System (INIS)

Perera, B.M.A.O.; Abeygunawardena, H.

2000-01-01

The use of nuclear techniques for studies on livestock production in Sri Lanka commenced in the 1970's with the establishment of Radioimmunoassay(RIA) technique for measuring reproductive hormones in the blood and milk of buffaloes, cattle and goats. Progesterone measurement was used in a series of studies to monitor reproductive status of ruminants under small-holder farming conditions in different agro-ecological zones, to identify the major constraints and to test methods for improving fertility. Thereafter, other isotopic techniques were established and used together with conventional methods for studies on nutrition, environmental physiology and disease control. In the early 1980's the nuclear-related technique of Enzyme-linked Immunosorbent Assay (ELISA) was established and applied for studies on the immune response of buffaloes to Toxocara vitulorum infection. Subsequently, ELISA techniques were used for studies on sero-epidomology and control of important viral and bacterial disease of cattle and buffaloes (rotavirus infection, haemorrhagic specticaemia, brucellosis, rinderpest and foot-and-mouth disease). The most recent development has been the use of ELISA for diagnosing viral diseases of poultry. In order to transfer the findings from research to the end-users, a multi disciplinary programme was launched in 1995, with the focus on improving buffalo production. Selected farms in three regions of the country participated in the testing, modification and evaluation of appropriate technology packages aimed at imroving the productivity and health of their animals in a sustainable and economically feasible manner. They were provided assistance to upgrade their operations to the status of farms, which are now serving as demonstration sites and training locations for other farmers (AU)

Nuclear techniques in industry

International Nuclear Information System (INIS)

Hammad, F.H.

1994-01-01

Nuclear techniques are utilized in almost every industry. The discussion in this paper includes discussions on tracer methods and uses nucleonic control systems technology; non-destructive testing techniques and radiation technology. 1 fig., 2 tabs

Dry Transfer Systems for Used Nuclear Fuel

Energy Technology Data Exchange (ETDEWEB)

Brett W. Carlsen; Michaele BradyRaap

2012-05-01

The potential need for a dry transfer system (DTS) to enable retrieval of used nuclear fuel (UNF) for inspection or repackaging will increase as the duration and quantity of fuel in dry storage increases. This report explores the uses for a DTS, identifies associated general functional requirements, and reviews existing and proposed systems that currently perform dry fuel transfers. The focus of this paper is on the need for a DTS to enable transfer of bare fuel assemblies. Dry transfer systems for UNF canisters are currently available and in use for transferring loaded canisters between the drying station and storage and transportation casks.

Facility and application of nuclear and supplementary analytical techniques at Dalat Nuclear Research Institute

International Nuclear Information System (INIS)

Nguyen Mong Sinh; Ho Manh Dung; Nguyen Thanh Binh

2006-01-01

The main applications of the nuclear and supplementary analytical techniques (N and SATs) in the Dalat Nuclear Research Institute (DNRI) and the facilities for the techniques are presented. The NATs in DNRI include the neutron activation analysis (NAA) with instrumental, radiochemical and prompt gamma methods (INAA, RNAA, PGNAA), the X-ray fluorescence analysis (XRFA) and the low-level counting and spectrometry. The sample irradiation sites for NAA, the automatic and manual pneumatic transfer systems, were installed at channels 7-1 and 13-2 and rotary rack on the Dalat research reactor. An ORTEC automatic sample changer (model ASC2) for γ-ray counting was equipped. A computer software for NAA based on the k 0 -standardization method for calculation of elemental concentration was developed. The low-level counting and spectrometry techniques have been setup. The devices required for sampling, sample preparation and data processing have also been equipped. The applications of N and SATs for determination of elemental composition, particularly important in providing data so-called trace elements, radionuclides and multi-element have been enlarged for objects of geology, archaeology, bio-agriculture, health-nutrition and environment. The implementation a quality system for N and SATs has been planned and initiated. (author)

International conference on isotopic and nuclear analytical techniques for health and environment. Book of abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

Decision makers and stakeholders are becoming increasingly dependent on reliable chemical measurements that serve as a basis for decisions related to health, consumer safety, commerce, environment protection and compliance to regulations. Several millions of analytical results are produced annually, thus consuming appreciable amounts of resources. Reliability of these data is of major concern if cost-benefit figures are applied. Nuclear and isotopic analytical techniques (NATs) have been supported by the IAEA as part of their mandate to foster the peaceful use of nuclear energy for many years. Nuclear analytical laboratories have been installed and upgraded through Technical Co-operation assistance in many Member State laboratories. These techniques, including INAA, XRF, PIXE, stable and radioisotopes, spectrometroscopy, etc. have been applied to a wide range of subjects with varying success. Nuclear analytical techniques, featuring some intrinsic quality control aspects, such as multi-nuclide analysis, frequently serve as 'reference methods' to cross-check critical results. As nuclear properties of elements are targeted, matrix problems seem to be negligible to a great extent. The International Conference on Isotopic and Nuclear Analytical Techniques for Health and Environment was held 10-13 June 2003 in Vienna, Austria. The main purpose of this Conference was to bring together scientists, technologists, representatives of industry and regulatory authorities to exchange information and review the status of current developments and applications of isotopic and nuclear analytical techniques, and to discuss future trends and developments. A further objective is to identify potential opportunities for developing countries for applying isotopic and nuclear analytical techniques in health and environmental studies, and to consider the promotion and transfer of such technology. International developments and trends in health care, nutrition, and environmental monitoring

Heat Transfer and Cooling Techniques at Low Temperature

CERN Document Server

Baudouy, B

2014-07-17

The first part of this chapter gives an introduction to heat transfer and cooling techniques at low temperature. We review the fundamental laws of heat transfer (conduction, convection and radiation) and give useful data specific to cryogenic conditions (thermal contact resistance, total emissivity of materials and heat transfer correlation in forced or boiling flow for example) used in the design of cooling systems. In the second part, we review the main cooling techniques at low temperature, with or without cryogen, from the simplest ones (bath cooling) to the ones involving the use of cryocoolers without forgetting the cooling flow techniques.

Heat Transfer and Cooling Techniques at Low Temperature

Energy Technology Data Exchange (ETDEWEB)

Baudouy, B [Saclay (France)

2014-07-01

The first part of this chapter gives an introduction to heat transfer and cooling techniques at low temperature. We review the fundamental laws of heat transfer (conduction, convection and radiation) and give useful data specific to cryogenic conditions (thermal contact resistance, total emissivity of materials and heat transfer correlation in forced or boiling flow for example) used in the design of cooling systems. In the second part, we review the main cooling techniques at low temperature, with or without cryogen, from the simplest ones (bath cooling) to the ones involving the use of cryocoolers without forgetting the cooling flow techniques.

Considerations on technology transfer process in nuclear power industry for developing countries

International Nuclear Information System (INIS)

Castro, I.P.

2000-01-01

Nuclear know-how cannot possibly be developed globally in developing countries, so technology transfer is the only conceivable way to make nuclear power accessible to these countries. Technology transfer process accounts for three mayor steps, namely acquisition, assimilation and diffusion, so a serious nuclear power program should comprise all of them. Substantial national efforts should be made by developing countries in financial, industrial, scientific, organizational and many other aspects in order to succeed a profitable technology transfer, but developing countries cannot make it by themselves. Finance is the biggest problem for developing world nuclear power projects. Human resource qualification is another important aspect of the nuclear power technology transfer, where technology receptor countries should prepare thousands of professionals in domestic and foreign schools. Challenge for nuclear power deployment is economical, but also social and political. Developed countries should be open to cooperate with developing countries in meeting their needs for nuclear power deployment that should be stimulated and coordinated by an international body which should serve as mediator for nuclear power technology transfer. This process must be carried out on the basis of mutual benefits, in which the developed world can exploit the fast growing market of energy in the developing world, but with the necessary condition of the previous preparation of our countries for this technology transfer. (author)

Cloning mice and ES cells by nuclear transfer from somatic stem cells and fully differentiated cells.

Science.gov (United States)

Wang, Zhongde

2011-01-01

Cloning animals by nuclear transfer (NT) has been successful in several mammalian species. In addition to cloning live animals (reproductive cloning), this technique has also been used in several species to establish cloned embryonic stem (ntES) cell lines from somatic cells. It is the latter application of this technique that has been heralded as being the potential means to produce isogenic embryonic stem cells from patients for cell therapy (therapeutic cloning). These two types of cloning differ only in the steps after cloned embryos are produced: for reproductive cloning the cloned embryos are transferred to surrogate mothers to allow them to develop to full term and for therapeutic cloning the cloned embryos are used to derive ntES cells. In this chapter, a detailed NT protocol in mouse by using somatic stem cells (neuron and skin stem cells) and fully differentiated somatic cells (cumulus cells and fibroblast cells) as nuclear donors is described.

Siemens technology transfer and cooperation in the nuclear fuel area

International Nuclear Information System (INIS)

Holley, H.-P.; Fuchs, J. H.; Rothenbuecher, R. A.

1997-01-01

Siemens is a full-range supplier in the area of nuclear power generation with broad experience and activities in the field of nuclear fuel. Siemens has developed advanced fuel technology for all types fuel assemblies used throughout the world and has significant experience worldwide in technology transfer in the field of nuclear fuel. Technology transfer and cooperation has ranged between the provision of mechanical design advice for a specific fuel design and the erection of complete fabrication plants for commercial operation in 3 countries. In the following the wide range of Siemens' technology transfer activities for both fuel design and fuel fabrication technologies are shown

Experimental techniques in nuclear and particle physics

International Nuclear Information System (INIS)

Tavernier, Stefaan

2010-01-01

The book is based on a course in nuclear and particle physics that the author has taught over many years to physics students, students in nuclear engineering and students in biomedical engineering. It provides the basic understanding that any student or researcher using such instruments and techniques should have about the subject. After an introduction to the structure of matter at the subatomic scale, it covers the experimental aspects of nuclear and particle physics. Ideally complementing a theoretically-oriented textbook on nuclear physics and/or particle physics, it introduces the reader to the different techniques used in nuclear and particle physics to accelerate particles and to measurement techniques (detectors) in nuclear and particle physics. The main subjects treated are: interactions of subatomic particles in matter; particle accelerators; basics of different types of detectors; and nuclear electronics. The book will be of interest to undergraduates, graduates and researchers in both particle and nuclear physics. For the physicists it is a good introduction to all experimental aspects of nuclear and particle physics. Nuclear engineers will appreciate the nuclear measurement techniques, while biomedical engineers can learn about measuring ionising radiation, the use of accelerators for radiotherapy. What's more, worked examples, end-of-chapter exercises, and appendices with key constants, properties and relationships supplement the textual material. (orig.)

Cloning animals by somatic cell nuclear transfer – biological factors

Science.gov (United States)

Tian, X Cindy; Kubota, Chikara; Enright, Brian; Yang, Xiangzhong

2003-01-01

Cloning by nuclear transfer using mammalian somatic cells has enormous potential application. However, somatic cloning has been inefficient in all species in which live clones have been produced. High abortion and fetal mortality rates are commonly observed. These developmental defects have been attributed to incomplete reprogramming of the somatic nuclei by the cloning process. Various strategies have been used to improve the efficiency of nuclear transfer, however, significant breakthroughs are yet to happen. In this review we will discuss studies conducted, in our laboratories and those of others, to gain a better understanding of nuclear reprogramming. Because cattle are a species widely used for nuclear transfer studies, and more laboratories have succeeded in cloning cattle than any other specie, this review will be focused on somatic cell cloning of cattle. PMID:14614770

Non-Destructive Techniques in the Tacis and Phare Nuclear Safety Programmes

International Nuclear Information System (INIS)

Bieth, Michel

2002-01-01

Decisions regarding the verification of design plant lifetime and potential license renewal periods involve a determination of the component and circuit condition. In Service Inspection of key reactor components becomes a crucial consideration for continued safe plant operation. The determination of the equipment properties by Non Destructive Techniques during periodic intervals is an important aspect of the assessment of fitness-for-service and safe operation of nuclear power plants The Tacis and Phare were established since 1991 by the European Union as support mechanisms through which projects could be identified and addressed satisfactorily. In Nuclear Safety, the countries mainly concerned are Russia, Ukraine, Armenia, and Kazakhstan for the Tacis programme, and Bulgaria, Czech Republic, Hungary, Slovak Republic, Lithuania, Romania and Slovenia for the Phare programme. The Tacis and Phare programs concerning the Nuclear Power Plants consist of: - On Site Assistance and Operational Safety, - Design Safety, - Regulatory Authorities, - Waste management, and are focused on reactor safety issues, contributing to the improvement in the safety of East European reactors and providing technology and safety culture transfer. The main parts of these programmes are related to the On-Site Assistance and to the Design Safety of VVER and RBMK Nuclear power plants where Non Destructive Techniques for In Service Inspection of the primary circuit components are addressed. (authors)

Soil transfer function obtention by Wiener's optimum filter

International Nuclear Information System (INIS)

Flores Ruiz, J.H.

1987-01-01

Transfer function in nuclear power plant Laguna Verde, Veracruz, using Wiener filter. This paper deal with identification of complex structural and soil-interaction systems often are modeling in nuclear industry. Nonparametric identification techniques are used to analyse the response of a class nonlinear vibrations. Efficient computational algorithms and experimental techniques based input-output system methods such as the Wiener-Kernel approach and least-square regression techniques are applied to get the transfer function in nuclear power plant Laguna Verde, Veracruz (Mexico) (Author)

Development of Measurement Techniques For Strengthening Nuclear Safeguards

International Nuclear Information System (INIS)

Badawy, I.

2007-01-01

The strategy of nuclear safeguards is based on the accounting and control of nuclear materials, nuclear technologies and activities in a State in order to attain its ''Legal'' goals of the application of atomic energy. The present paper investigates the development in the measurement techniques used in the verification and control of NMs for the purpose of strengthening safeguards. Its focus is to review the recent nuclear measurement techniques used for the identification and verification of nuclear materials.The different levels of verification and the accuracy of these techniques are discussed. The implementation of stregthened safeguards; and nuclear materials verification and control in the world are mentioned. Also, the recently proposed measures to enhance the ability to detect undeclared nuclear materials, nuclear activities and facilities that would need advanced measurement techniques are indicated.

Nuclear techniques in medicine

International Nuclear Information System (INIS)

Basson, J.K.

1984-01-01

The use of nuclear techniques in medicine has, also in South Africa, increased enormously, especially as regards diagnosis and reseach. In 1983 in vivo tests with radioisotopes were carried out and also in vitro tests, mainly by radioimmunoassay. Therapy with open and sealed radioactive sources was concentrated mainly on cancer treatments. In 1983 NUCOR supported 83 research projects in the life sciences. Imaging of organs or tissues in the body with nuclear techniques has developed into the most important application of nuclear medicine, with the development of even more specific labelled compounds as the main objective. Radioimmunoassay is at an exciting watershed, now that labelled monoclonal antibodies with high specificity for early diagnosis (also in cancer) and even localised radiotherapy have become available. The establishment of the 200 MeV open-sector cyclotron by the National Accelerator Centre also for medical purposes will, in addition to the large-scale production of the protonrich isotopes, also make a substantial contribution to radiotherapy with nuclear particles such as neutrons, protons and helium-3

Nuclear transfer to prevent mitochondrial DNA disorders : revisiting the debate on reproductive cloning

NARCIS (Netherlands)

Bredenoord, A. L.; Dondorp, W.; Pennings, G.; De Wert, G.

Preclinical experiments are currently performed to examine the feasibility of several types of nuclear transfer to prevent mitochondrial DNA (mtDNA) disorders. Whereas the two most promising types of nuclear transfer to prevent mtDNA disorders, spindle transfer and pronuclear transfer, do not amount

Nuclear and related techniques in the control of communicable diseases

International Nuclear Information System (INIS)

1991-07-01

The IAEA has a programme component entitled ''Nuclear Techniques in Communicable Diseases'', the aims of which are to encourage research in the development of new methods of controlling communicable diseases and to transfer the technology to institutes in endemic regions. Implementation of the programme component includes information exchange through publications, symposiums and seminars. The two most recent seminars were held in Bombay in November 1988 and Belo Horizonte in November 1989, and a selection of the papers presented have been published in this Technical Document. Refs, figs and tabs

Experimental techniques in nuclear and particle physics

CERN Document Server

Tavernier, Stefaan

2009-01-01

The book is based on a course in nuclear and particle physics that the author has taught over many years to physics students, students in nuclear engineering and students in biomedical engineering. It provides the basic understanding that any student or researcher using such instruments and techniques should have about the subject. After an introduction to the structure of matter at the subatomic scale, it covers the experimental aspects of nuclear and particle physics. Ideally complementing a theoretically-oriented textbook on nuclear physics and/or particle physics, it introduces the reader to the different techniques used in nuclear and particle physics to accelerate particles and to measurement techniques (detectors) in nuclear and particle physics. The main subjects treated are: interactions of subatomic particles in matter; particle accelerators; basics of different types of detectors; and nuclear electronics. The book will be of interest to undergraduates, graduates and researchers in both particle and...

Technical knowledge/skill transfer in nuclear power plant manufacturer

International Nuclear Information System (INIS)

Arima, Hiroshi; Sagawa, Wataru; Ogawa, Yukio

2009-01-01

Due to environmental concerns such as global warming, needs for nuclear power is increasing. However, many expert engineers and technicians are now entering a period of retirement. And due to weak demands of new plant construction for long years, opportunity for technology learning/experience had been lost. Therefore, to secure human resource and to develop their ability are urgent issues for nuclear industries. Hitachi nuclear division continues efforts for technology transfer and human resource training. This paper describes the following two activities. (1) Improvement of common technical basis, and implementation of PDCA cycle, (2) Development of supporting tools to accelerate technology transfer through OJT (On the Job Training). (author)

Numerical Chromosome Errors in Day 7 Somatic Nuclear Transfer Bovine Blastocysts

DEFF Research Database (Denmark)

Booth, Paul J.; VIUFF, Dorte; Tan, Shijian

2002-01-01

Day 7 bovine somatic nuclear transfer (NT) embryos reconstructed from granulosa cells were examined for numerical chromosome aberrations as a potential cause of the high embryonic and fetal loss observed in such embryos after transfer. The NT embryos were reconstructed using a zona-free manipulat......Day 7 bovine somatic nuclear transfer (NT) embryos reconstructed from granulosa cells were examined for numerical chromosome aberrations as a potential cause of the high embryonic and fetal loss observed in such embryos after transfer. The NT embryos were reconstructed using a zona...

Technology transfer in the Spanish nuclear programme

International Nuclear Information System (INIS)

Perez-Naredo, F.

1983-01-01

The paper describes the process of technology transfer under the Spanish nuclear programme and its three generations of nuclear power plants during the last 20 years, with special reference to the nine new plants equipped with Westinghouse pressurized water reactors and the rising level of national involvement in these stations. It deals with the development of Westinghouse Nuclear's organization in Spain, referring to its staff and to the manufacturers who supply equipment for the programme, going into particular detail where problems of quality assurance are concerned. In conclusion, it summarizes the present capacity of Spanish industry in various areas connected with the design, manufacture and construction of nuclear power plants. (author)

Analysing CMS transfers using Machine Learning techniques

CERN Document Server

Diotalevi, Tommaso

2016-01-01

LHC experiments transfer more than 10 PB/week between all grid sites using the FTS transfer service. In particular, CMS manages almost 5 PB/week of FTS transfers with PhEDEx (Physics Experiment Data Export). FTS sends metrics about each transfer (e.g. transfer rate, duration, size) to a central HDFS storage at CERN. The work done during these three months, here as a Summer Student, involved the usage of ML techniques, using a CMS framework called DCAFPilot, to process this new data and generate predictions of transfer latencies on all links between Grid sites. This analysis will provide, as a future service, the necessary information in order to proactively identify and maybe fix latency issued transfer over the WLCG.

Development of nuclear fuel microsphere handling techniques and equipment

International Nuclear Information System (INIS)

Mack, J.E.; Suchomel, R.R.; Angelini, P.

1979-01-01

Considerable progress has been made in the development of microsphere handling techniques and equipment for nuclear applications. Work at Oak Ridge National Laboratory with microspherical fuel forms dates back to the early sixties with the development of the sol-gel process. Since that time a number of equipment items and systems specifically related to microsphere handling and characterization have been identified and developed for eventual application in a remote recycle facility. These include positive and negative pressure transfer systems, samplers, weighers, a blender-dispenser, and automated devices for particle size distribution and crushing strength analysis. The current status of these and other components and systems is discussed

Heat transfer and fluid flow in nuclear systems

CERN Document Server

Fenech, Henri

1982-01-01

Heat Transfer and Fluid in Flow Nuclear Systems discusses topics that bridge the gap between the fundamental principles and the designed practices. The book is comprised of six chapters that cover analysis of the predicting thermal-hydraulics performance of large nuclear reactors and associated heat-exchangers or steam generators of various nuclear systems. Chapter 1 tackles the general considerations on thermal design and performance requirements of nuclear reactor cores. The second chapter deals with pressurized subcooled light water systems, and the third chapter covers boiling water reacto

Powder metallurgy techniques in nuclear technology

International Nuclear Information System (INIS)

Mardon, P.G.

1983-01-01

The nuclear application of conventional powder metallurgy routes is centred on the fabrication of ceramic fuels. The stringent demands in terms of product performance required by the nuclear industry militate against the use of conventional powder metallurgy to produce metallic components such as the fuel cladding. However, the techniques developed in powder metallurgy find widespread application throughout nuclear technology. Illustrations of the use of these techniques are given in the fields of absorber materials, ceramic cladding materials, oxide fuels, cermet fuels, and the disposal of highly active waste. (author)

Model of tritium transfer into environment by the personnel of nuclear enterprises

International Nuclear Information System (INIS)

Batalin, J.; Krechetova, A.

2004-01-01

One of the ways of radionuclide transfer from a nuclear enterprise into an environment is analysed. This way of transfer is the transport of radionuclides by the personnel of a nuclear enterprise. During an active work in a nuclear enterprise the personnel accumulate radionuclides from the air of industrial premises. Accumulated radionuclides are released from the organism into an environment according to the effective period of half-draw. The main part of radionuclides is transferred from the organism of professional workers into an environment: first of all into the air and on furniture of their dwellings and later - into the organisms of their family members. In this way contamination of workers' dwellings and irradiation of their family members exceed the contamination through air and water. The model is confirmed as an example of tritium transfer from nuclear enterprises. (author)

International co-operation and the transfer of nuclear technology

International Nuclear Information System (INIS)

di Primio, J.C.

1977-01-01

The transfer of technology from developed countries is usually done through industrial enterprises. The local industrialization of imported technology does not necessarily imply that full benefit is extracted from its application. A pre-established scientific and technical infrastructure is needed to understand and incorporate it, and to develop methods for improvement and use at the industrial level, in the frame of national conditions. The transference of nuclear technology has recently shown new concepts for implementation. It is becoming a rule that massive industrial nuclear technology transfer to developing nations is tied to a requirement for simultaneous assistance in creating or promoting the infrastructure. An example of international co-operation to meet this requirement is the Argentine-German Agreement for the Peaceful Applications of Nuclear Energy. Since 1971 this has been used to strengthen the scientific and technical programmes of the Argentine Atomic Energy Commission in the relevant fields of industrial applications. The objectives and implementation of the agreement are described: co-operative actions were initially directed to the infrastructure needed to support the nuclear fuel cycle industry. The results achieved during the period 1971-1976 are critically analysed. This analysis has influenced the selection of future co-operative projects as well as the extension of the co-operation to other nuclear fields of common interest. (author)

A transferability study of the EPR-tooth-dosimetry technique

International Nuclear Information System (INIS)

Sholom, S.; Chumak, V.; Desrosiers, M.; Bouville, A.

2006-01-01

The transferability of a measurement protocol from one laboratory to another is an important feature of any mature, standardised protocol. The electron paramagnetic resonance (EPR)-tooth dosimetry technique that was developed in Scientific Center for Radiation Medicine, AMS (Ukraine) (SCRM) for routine dosimetry of Chernobyl liquidators has demonstrated consistent results in several inter-laboratory measurement comparisons. Transferability to the EPR dosimetry laboratory at the National Inst. of Standards and Technology (NIST) was examined. Several approaches were used to test the technique, including dose reconstruction of SCRM-NIST inter-comparison samples. The study has demonstrated full transferability of the technique and the possibility to reproduce results in a different laboratory environment. (authors)

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Security background checks for secure transfer of nuclear... PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security background checks for secure transfer of nuclear materials. Licensees are excepted from the security...

Nuclear and nuclear reprogramming during the first cell cycle in bovine nuclear transfer embryos

DEFF Research Database (Denmark)

Østrup, Olga; Petrovicova, Ida; Strejcek, Frantisek

2009-01-01

Abstract The immediate events of genomic reprogramming at somatic cell nuclear transfer (SCNT) are to high degree unknown. This study was designed to evaluate the nuclear and nucleolar changes during the first cell cycle. Bovine SCNT embryos were produced from starved bovine fibroblasts and fixed......, somatic cell nuclei introduced into enucleated oocytes displayed chromatin condensation, partial nuclear envelope breakdown, nucleolar desegregation and transcriptional quiescence already at 0.5 hpa. Somatic cell cytoplasm remained temporally attached to introduced nucleus and nucleolus was partially...... restored indicating somatic influence in the early SCNT phases. At 1-3 hpa, chromatin gradually decondensed toward the nucleus periphery and nuclear envelope reformed. From 4 hpa, the somatic cell nucleus gained a PN-like appearance and displayed NPBs suggesting ooplasmic control of development....

Cloning of ES cells and mice by nuclear transfer.

Science.gov (United States)

Wakayama, Sayaka; Kishigami, Satoshi; Wakayama, Teruhiko

2009-01-01

We have been able to develop a stable nuclear transfer (NT) method in the mouse, in which donor nuclei are directly injected into the oocyte using a piezo-actuated micromanipulator. Although the piezo unit is a complex tool, once mastered it is of great help not only in NT experiments, but also in almost all other forms of micromanipulation. Using this technique, embryonic stem (ntES) cell lines established from somatic cell nuclei can be generated relatively easily from a variety of mouse genotypes and cell types. Such ntES cells can be used not only for experimental models of human therapeutic cloning but also as a means of preserving mouse genomes instead of preserving germ cells. Here, we describe our most recent protocols for mouse cloning.

Literature survey of heat transfer enhancement techniques in refrigeration applications

Energy Technology Data Exchange (ETDEWEB)

Jensen, M.K.; Shome, B. [Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Mechanical Engineering, Aeronautical Engineering and Mechanics

1994-05-01

A survey has been performed of the technical and patent literature on enhanced heat transfer of refrigerants in pool boiling, forced convection evaporation, and condensation. Extensive bibliographies of the technical literature and patents are given. Many passive and active techniques were examined for pure refrigerants, refrigerant-oil mixtures, and refrigerant mixtures. The citations were categorized according to enhancement technique, heat transfer mode, and tube or shell side focus. The effects of the enhancement techniques relative to smooth and/or pure refrigerants were illustrated through the discussion of selected papers. Patented enhancement techniques also are discussed. Enhanced heat transfer has demonstrated significant improvements in performance in many refrigerant applications. However, refrigerant mixtures and refrigerant-oil mixtures have not been studied extensively; no research has been performed with enhanced refrigerant mixtures with oil. Most studies have been of the parametric type; there has been inadequate examination of the fundamental processes governing enhanced refrigerant heat transfer, but some modeling is being done and correlations developed. It is clear that an enhancement technique must be optimized for the refrigerant and operating condition. Fundamental processes governing the heat transfer must be examined if models for enhancement techniques are to be developed; these models could provide the method to optimize a surface. Refrigerant mixtures, with and without oil present, must be studied with enhancement devices; there is too little known to be able to estimate the effects of mixtures (particularly NARMs) with enhanced heat transfer. Other conclusions and recommendations are offered.

A biofilm microreactor system for simultaneous electrochemical and nuclear magnetic resonance techniques

International Nuclear Information System (INIS)

Renslow, Ryan S.; Babauta, Jerome T.; Majors, Paul D.; Mehta, Hardeep S.; Ewing, R. James; Ewing, Thomas; Mueller, Karl T.; Beyenal, Haluk

2014-01-01

In order to fully understand electrochemically active biofilms and the limitations to their scale-up in industrial biofilm reactors, a complete picture of the microenvironments inside the biofilm is needed. Nuclear magnetic resonance (NMR) techniques are ideally suited for the study of biofilms and for probing their microenvironments because these techniques allow for non-invasive interrogation and in situ monitoring with high resolution. By combining NMR with simultaneous electrochemical techniques, it is possible to sustain and study live electrochemically active biofilms. Here, we introduce a novel biofilm microreactor system that allows for simultaneous electrochemical and NMR techniques (EC-NMR) at the microscale. Microreactors were designed with custom radiofrequency resonator coils, which allowed for NMR measurements of biofilms growing on polarized gold electrodes. For an example application of this system, we grew Geobacter sulfurreducens biofilms. NMR was used to investigate growth media flow velocities, which were compared to simulated laminar flow, and electron donor concentrations inside the biofilms. We use Monte Carlo error analysis to estimate standard deviations of the electron donor concentration measurements within the biofilm. The EC-NMR biofilm microreactor system can ultimately be used to correlate extracellular electron transfer rates with metabolic reactions and explore extracellular electron transfer mechanisms

Microscopic description of pair transfer between two superfluid Fermi systems: Combining phase-space averaging and combinatorial techniques

Science.gov (United States)

Regnier, David; Lacroix, Denis; Scamps, Guillaume; Hashimoto, Yukio

2018-03-01

In a mean-field description of superfluidity, particle number and gauge angle are treated as quasiclassical conjugated variables. This level of description was recently used to describe nuclear reactions around the Coulomb barrier. Important effects of the relative gauge angle between two identical superfluid nuclei (symmetric collisions) on transfer probabilities and fusion barrier have been uncovered. A theory making contact with experiments should at least average over different initial relative gauge-angles. In the present work, we propose a new approach to obtain the multiple pair transfer probabilities between superfluid systems. This method, called phase-space combinatorial (PSC) technique, relies both on phase-space averaging and combinatorial arguments to infer the full pair transfer probability distribution at the cost of multiple mean-field calculations only. After benchmarking this approach in a schematic model, we apply it to the collision 20O+20O at various energies below the Coulomb barrier. The predictions for one pair transfer are similar to results obtained with an approximated projection method, whereas significant differences are found for two pairs transfer. Finally, we investigated the applicability of the PSC method to the contact between nonidentical superfluid systems. A generalization of the method is proposed and applied to the schematic model showing that the pair transfer probabilities are reasonably reproduced. The applicability of the PSC method to asymmetric nuclear collisions is investigated for the 14O+20O collision and it turns out that unrealistically small single- and multiple pair transfer probabilities are obtained. This is explained by the fact that relative gauge angle play in this case a minor role in the particle transfer process compared to other mechanisms, such as equilibration of the charge/mass ratio. We conclude that the best ground for probing gauge-angle effects in nuclear reaction and/or for applying the proposed

The effect of the number of transferred embryos, the interval between nuclear transfer and embryo transfer, and the transfer pattern on pig cloning efficiency.

Science.gov (United States)

Rim, Chol Ho; Fu, Zhixin; Bao, Lei; Chen, Haide; Zhang, Dan; Luo, Qiong; Ri, Hak Chol; Huang, Hefeng; Luan, Zhidong; Zhang, Yan; Cui, Chun; Xiao, Lei; Jong, Ui Myong

2013-12-01

To improve the efficiency of producing cloned pigs, we investigated the influence of the number of transferred embryos, the culturing interval between nuclear transfer (NT) and embryo transfer, and the transfer pattern (single oviduct or double oviduct) on cloning efficiency. The results demonstrated that transfer of either 150-200 or more than 200NT embryos compared to transfer of 100-150 embryos resulted in a significantly higher pregnancy rate (48 ± 16, 50 ± 16 vs. 29 ± 5%, pcloning efficiency is achieved by adjusting the number and in vitro culture time of reconstructed embryos as well as the embryo transfer pattern. Copyright © 2013 Elsevier B.V. All rights reserved.

Technical knowledge/skill transfer in nuclear division of Hitachi group

International Nuclear Information System (INIS)

Arima, Hiroshi

2008-01-01

Due to environmental concerns such as global warming, needs the nuclear power is increasing. However, many expert engineers and technicians are now entering a period of retirement. And due to weak demands of new plant construction for long years, opportunity for technology learning/experience had been lost. Therefore, to secure human resource and to develop their ability are urgent issues for nuclear industries. Hitachi nuclear division continues efforts for technology transfer and human resource training. This paper describes the following two activities. (1) Improvement of common technical basis, and implementation of PDCA cycle. (2) Development of supporting tools to accelerate technology transfer through OJT (On the Job Training). (author)

Nuclear techniques in agriculture

International Nuclear Information System (INIS)

Bhagwat, S.G.

2012-01-01

Crops provide us food grains and many other products. Demand for food and other agricultural products is increasing. There is also need for improvement of quality of the agricultural produce. There are several technologies in use for achieving the goal of increasing the quantity and quality of agricultural produce. Nuclear techniques provide us with an option which has certain advantages. The characteristics of crop plants are determined by the genetic make up of the plant. Traditionally the genetic make up was modified using conventional breeding techniques such as cross breeding to improve crops for yield, disease resistance, stress tolerance, resistance to insect pests or to improve quality. New varieties of crops are produced which replace the earlier ones and thus the demands are met. The process of development of new varieties is long and time consuming. Nuclear technique called mutation breeding provides an efficient way of breeding new varieties or improving the older ones. This technique merely enhances the process of occurrence of mutations. In nature mutations occur at a rate of approximately one in a million, while when mutations are induced using radiations such as gamma rays the efficiency of inducing mutations is enhanced. Useful mutations are selected, the mutants are evaluated and developed as a new variety. In the Nuclear Agriculture and Biotechnology Division (NA and BTD) this technique has been used to develop mutants of many crop plants. The mutants can be used to develop a variety directly or by using it in further breeding programme. Using these approaches the NA and BTD has developed 40 new varieties of crops such as groundnut, mungbean, urid, pigeon pea, mustard, soybean, sunflower, cowpea, jute. These varieties are developed in collaboration with other agricultural institutions and are popular among the farming community. The method of mutation breeding can be applied to many other crops for improvement. There is increasing interest among

Introduction to nuclear techniques in agronomy and plant biology

International Nuclear Information System (INIS)

Vose, P.B.

1980-01-01

A scientific textbook concerning the use of nuclear techniques in agricultural and biological studies has been written. In the early chapters, basic radiation physics principles are described including the nature of isotopes and radiation, nuclear reactions, working with radioisotopes, detection systems and instrumentation, radioassay and tracer techniques. The remaining chapters describe the applications of various nuclear techniques including activation analysis for biological samples, X-ray fluorescence spectrography for plants and soils, autoradiography, isotopes in soils studies, isotopic tracers in field experimentation, nuclear techniques in plant function and soil water studies and radiation-induced mutations in plant breeding. The principles and methods of these nuclear techniques are described in a straightforward manner together with details of many possible agricultural and biological studies which students could perform. (U.K.)

Fuel transfer system for a nuclear reactor

International Nuclear Information System (INIS)

Katz, L.R.; Marshall, J.R.; Desmarchais, W.E.

1977-01-01

Disclosed is a fuel transfer system for moving nuclear reactor fuel assemblies from a new fuel storage pit to a containment area containing the nuclear reactor, and for transferring spent fuel assemblies under water from the reactor to a spent fuel storage area. The system includes an underwater track which extends through a wall dividing the fuel building from the reactor containment and a car on the track serves as the vehicle for moving fuel assemblies between these two areas. The car is driven by a motor and linkage extending from an operating deck to a chain belt drive on the car. A housing pivotally mounted at its center on the car is hydraulically actuated to vertically receive a fuel assembly which then is rotated to a horizontal position to permit movement through the wall between the containment and fuel building areas. Return to the vertical position provides for fuel assembly removal and the reverse process is repeated when transferring an assembly in the opposite direction. Limit switches used in controlling operation of the system are designed to be replaced from the operating deck when necessary by tools designed for this purpose. 5 claims, 8 figures

A swivelling transfer device for nuclear reactors

International Nuclear Information System (INIS)

Allain, Albert; Mulot, Pierre; Filloleau, Etienne

1974-01-01

The invention relates to a swivelling transfer device for fuel-assemblies. According to the invention, the device comprises, within a protective enclosure, a swivelling system comprising two sets of rails rotatable about an axis and so arranged that the lower and thereof penetrates into the extensions of the extremities of ramps dipped into the reactor and into a storage enclosure. This can apply to the transfer of nuclear reactor fuel assemblies, in particular for reactors of the molten sodium fast neutron type [fr

A new MV bus transfer scheme for nuclear power plants

International Nuclear Information System (INIS)

Chang, C.K.

2015-01-01

The auxiliary power system of many generating stations consists of offsite power supply system and onsite power supply system, including emergency diesel generators (EDG) to provide secure power to auxiliary loads. If a normal power supply fails to supply power, then the power source is transferred to a standby power supply. In the case of nuclear power plants (NPP), the unit auxiliary transformer (UAT) and standby auxiliary transformer (SAT) - or station service transformer - are installed and powered from 2 offsite power circuits to meet regulatory requirements. The transfer methods of a motor bus from a normal source to a standby source used in power generating stations are fast bus transfer, in-phase transfer, or residual transfer. Fast bus transfer method is the most popular and residual voltage transfer method that is used as a backup in medium voltage buses in general. The use of the advanced technology like open circuit voltage prediction and digital signal processing algorithms can improve the reliability of fast transfer scheme. However, according to the survey results of the recent operation records in nuclear power plants, there were many instances where the fast transfer scheme has failed. To assure bus transfer in any conditions and circumstances, un-interruptible bus transfer scheme utilizing the state of the art medium voltage UPS (Un-interruptible Power Supply) is discussed and elaborated

INTERNATIONAL TECHNOLOGY TRANSFER AND LOCALIZATION: SUCCESS STORIES IN NUCLEAR BRANCH

Directory of Open Access Journals (Sweden)

Yulia V. Chernyakhovskaya

2016-01-01

Full Text Available countries are considering nuclear power industry development [2, p. 3; 3, p. 3; 4]. For newcomer-countries it is of great importance to stimulate the national industry through NPP projects implementation based on technology transfer and localization (TTL. The study and systematization of world experience is useful in purpose to elaborate the national industry development programs. Objectives. The aim of article is to determine success factors of TTL; tasks: 1 to study TTL international experience in the fi eld of nuclear power technologies; 2 on the ground of the world practice to analyze preconditions, contents, stages, arrangement modes, formats and results of TTL. Methods. The following methods are utilized in the study: analysis and synthesis including problem-chronological, cause and eff ect and logical analysis and historical-diachronic method (method of periodization. Results. The following conclusions presented below have been made on the basis of the three cases study related to nuclear industry development using TTL (France, South Korea and China. Conclusions. The TTL success factors includes: Government support that provides long-term governmental development plan of nuclear power and industry for nuclear power based on TTL, and an appropriate international cooperation (under favorable conditions of “NPP buyers market”; Complex approach to implementation of the national TTL program and NPP construction projects: signing of NPP construction contracts with vendors stipulating technology transfer; NPP designing and constructing should be performed jointly with training and transferring of technical documentation and software. Technology transfer cooperation should be implemented through the licenses agreements and setting up joint ventures; Public acceptance and support.

Indirect techniques in nuclear astrophysics

International Nuclear Information System (INIS)

Mukhamedzhanov, A.M.; Tribble, R.E.; Blokhintsev, L.D.; Cherubini, S.; Spitaleri, C.; Kroha, V.; Nunes, F.M.

2005-01-01

It is very difficult or often impossible to measure in the lab conditions nuclear cross sections at astrophysically relevant energies. That is why different indirect techniques are used to extract astrophysical information. In this talk different experimental possibilities to get astrophysical information using radioactive and stable beams will be addressed. 1. The asymptotic normalization coefficient (ANC) method. 2. Radiative neutron captures are determined by the spectroscopic factors (SP). A new experimental technique to determine the neutron SPs will be addressed. 3. 'Trojan Horse' is another unique indirect method, which allows one to extract the astrophysical factors for direct and resonant nuclear reactions at astrophysically relevant energies. (author)

Mapping air pollution. Application of nuclear techniques

International Nuclear Information System (INIS)

Parr, R.M.; Stone, S.F.; Zeisler, R.

1996-01-01

Nuclear techniques have important applications in the study of air pollution and many of its components. However, it is in the study of airborne particulate matter (APM) that nuclear analytical techniques find many of their most important applications. This article focuses on those applications, and on the work of the IAEA in this important field of study. 2 figs

Application of fieldbus techniques in nuclear power plants

International Nuclear Information System (INIS)

Wang Xu; Chen Hang; Yu Shuxin; Zhang Xinli

2012-01-01

The successful application experience of fieldbus techniques in thermal power plants and nuclear power plants are outlined first. And then, the application of fieldbus techniques in domestic 3rd-generation nuclear power plant (NPP) project is discussed. After that, the solution to the potential problems of fieldbus techniques application in NPP is provided. (authors)

Variance-reduction technique for Coulomb-nuclear thermalization of energetic fusion products in hot plasmas

International Nuclear Information System (INIS)

DeVeaux, J.C.; Miley, G.H.

1982-01-01

A variance-reduction technique involving use of exponential transform and angular-biasing methods has been developed. Its purpose is to minimize the variance and computer time involved in estimating the mean fusion product (fp) energy deposited in a hot, multi-region plasma under the influence of small-energy transfer Coulomb collisions and large-energy transfer nuclear elastic scattering (NES) events. This technique is applicable to high-temperature D- 3 He, Cat. D and D-T plasmas which have highly energetic fps capable of undergoing NES. A first application of this technique is made to a D- 3 He Field Reversed Mirror (FRM) where the Larmor radius of the 14.7 MeV protons are typically comparable to the plasma radius (plasma radius approx. 2 fp gyroradii) and the optimistic fp confinement (approx. 45% of 14.7 MeV protons) previously predicted is vulnerable to large orbit perturbations induced by NES. In the FRM problem, this variance reduction technique is used to estimate the fractional difference in the average fp energy deposited in the closed-field region, E/sub cf/, with and without NES collisions

Non destructive assay techniques applied to nuclear materials

International Nuclear Information System (INIS)

Gavron, A.

2001-01-01

Nondestructive assay is a suite of techniques that has matured and become precise, easily implementable, and remotely usable. These techniques provide elaborate safeguards of nuclear material by providing the necessary information for materials accounting. NDA techniques are ubiquitous, reliable, essentially tamper proof, and simple to use. They make the world a safer place to live in, and they make nuclear energy viable. (author)

Knowledge transfer in Swedish Nuclear Power Plants in connection with retirements

International Nuclear Information System (INIS)

Larsson, Annika; Ohlsson, Kjell; Roos, Anna

2007-01-01

This report displays how the Swedish nuclear power plants Forsmark, Oskarshamn and Ringhals work with knowledge management. The report also consists of a literature review of appropriate ways to extract tacit knowledge as well as methods to transfer competence. The report is made up of a smaller number of interviews at the nuclear power plants in combination with a questionnaire distributed to a larger number of people at the plants. The results of the interview study is that only one of the Swedish nuclear power plants have a programme to transfer knowledge from older staff to newer. This is, however, not a programme for everyone. Another plant has a programme for knowledge building, but only for their specialists. At both plants, which lack a programme, the interviewees request more structure in knowledge transfer; even though they feel the current way of transferring knowledge with mentors works well. Besides more structure, interviewees present a wish to have more time for knowledge transfer as well as the opportunity to recruit more than needed. Recruiting more than needed is however not very simple due to multiple causes such as nominal sizing departments and a difficulty of recruiting people to work far from larger cities. The way things are now, many feel too under-staffed and under a lot of time pressure daily to also have time for knowledge transfer besides their normal work

Status and developing of nuclear emergency response techniques in China

International Nuclear Information System (INIS)

Jiangang, Zhang; Bing, Zhao; Rongyao, Tang; Xiaoxiao, Xu

2008-01-01

Full text: Nuclear Emergency preparedness and response in China is consistent with international basic principle of nuclear safety and emergency response. Nuclear emergency response techniques in China developed with nuclear power from 1980s. The status of nuclear emergency techniques in China are: 1) China have plentiful experiences and abilities in the fields of nuclear facility emergency planning and preparedness, nuclear accident consequence assessment, emergency monitoring, and emergency advisory; 2) Emergency assistance ability in China has a foundation, however it cannot satisfy national requirement; 3) Emergency planning and preparedness is not based on hazard assessment; 4) Remote monitoring and robot techniques in not adaptable to the requirements of nuclear emergency response; 5) A consistent emergency assessment system is lack in China. In this paper, it is analyzed what is the developing focal points of nuclear emergency response techniques in China, and it is proposed that the main points are: a) To develop the research of emergency preparedness on the base of hazard analysis; b) To improve remote monitoring and robot ability during nuclear emergency; c) To develop the response technique research with anti-terrorism. (author)

Transfer of nuclear technology: A designer-contractor's perspective

International Nuclear Information System (INIS)

See Hoye, D.; Hedges, K.R.; Hink, A.D.

2000-01-01

The paper presents the successful Canadian experience in developing a nuclear power technology - CANDU - and exporting it. Consideration is paid to technology that has to be transferred, receiver country objectives and mechanisms and organizational framework. (author)

Upper-limb biomechanical analysis of wheelchair transfer techniques in two toilet configurations.

Science.gov (United States)

Tsai, Chung-Ying; Boninger, Michael L; Bass, Sarah R; Koontz, Alicia M

2018-06-01

Using proper technique is important for minimizing upper limb kinetics during wheelchair transfers. The objective of the study was to 1) evaluate the transfer techniques used during toilet transfers and 2) determine the impact of technique on upper limb joint loading for two different toilet configurations. Twenty-six manual wheelchair users (23 men and 3 women) performed transfers in a side and front wheelchair-toilet orientation while their habitual transfer techniques were evaluated using the Transfer Assessment Instrument. A motion analysis system and force sensors were used to record biomechanical data during the transfers. More than 20% of the participants failed to complete five transfer skills in the side setup compared to three skills in the front setup. Higher quality skills overall were associated with lower peak forces and moments in both toilet configurations (-0.68 perform these skills correctly (p ≤ 0.04). In the front setup, positioning the wheelchair within three inches of the transfer target was associated with reduced peak trailing forces and moments across all three upper limb joints (p = 0.02). Transfer skills training, making toilet seats level with the wheelchair seat, positioning the wheelchair closer to the toilet and mounting grab bars in a more ideal location for persons who do sitting pivot transfers may facilitate better quality toilet transfers. Published by Elsevier Ltd.

Design guide for heat transfer equipment in water-cooled nuclear reactor systems

International Nuclear Information System (INIS)

1975-07-01

Information pertaining to design methods, material selection, fabrication, quality assurance, and performance tests for heat transfer equipment in water-cooled nuclear reactor systems is given in this design guide. This information is intended to assist those concerned with the design, specification, and evaluation of heat transfer equipment for nuclear service and the systems in which this equipment is required. (U.S.)

Conversion from film to image plates for transfer method neutron radiography of nuclear fuel

Energy Technology Data Exchange (ETDEWEB)

Craft, Aaron E.; Papaioannou, Glen C.; Chichester, David L.; Williams, Walter J.

2017-02-01

This paper summarizes efforts to characterize and qualify a computed radiography (CR) system for neutron radiography of irradiated nuclear fuel at Idaho National Laboratory (INL). INL has multiple programs that are actively developing, testing, and evaluating new nuclear fuels. Irradiated fuel experiments are subjected to a number of sequential post-irradiation examination techniques that provide insight into the overall behavior and performance of the fuel. One of the first and most important of these exams is neutron radiography, which provides more comprehensive information about the internal condition of irradiated nuclear fuel than any other non-destructive technique to date. Results from neutron radiography are often the driver for subsequent examinations of the PIE program. Features of interest that can be evaluated using neutron radiography include irradiation-induced swelling, isotopic and fuel-fragment redistribution, plate deformations, and fuel fracturing. The NRAD currently uses the foil-film transfer technique with film for imaging fuel. INL is pursuing multiple efforts to advance its neutron imaging capabilities for evaluating irradiated fuel and other applications, including conversion from film to CR image plates. Neutron CR is the current state-of-the-art for neutron imaging of highly-radioactive objects. Initial neutron radiographs of various types of nuclear fuel indicate that radiographs can be obtained of comparable image quality currently obtained using film. This paper provides neutron radiographs of representative irradiated fuel pins along with neutron radiographs of standards that informed the qualification of the neutron CR system for routine use. Additionally, this paper includes evaluations of some of the CR scanner parameters and their effects on image quality.

Heat and mass transfer and hydrodynamics in two-phase flows in nuclear power plants

International Nuclear Information System (INIS)

Styrikovich, M.A.; Polonskii, V.S.; Tsiklauri, G.V.

1986-01-01

This book examines nuclear power plant equipment from the point of view of heat and mass transfer and the behavior of impurities contained in water and in steam, with reference to real water regimes of nuclear power plants. The transfer processes of equipment are considered. Heat and mass transfer are analyzed in the pre-crisis regions of steam-generating passages with non-permeable surfaces, and in capillary-porous structures. Attention is given to forced convection boiling crises and top post-DNB heat transfer. Data on two-phase hydrodynamics in straight and curved channels are correlated and safety aspects of nuclear power plants are discussed

Role of a national research organization in the transfer of nuclear technology

International Nuclear Information System (INIS)

Ahmad, Ishaq

1977-01-01

Nuclear technology holds great promise for developing countries because it can contribute to national development. The developing countries, however, lack the resources and expertise to develop nuclear technology through their own efforts. A national research organization devoted to the promotion and utilization of nucler technology can provide an effective channel for the transfer of nuclear technology. The problems which the national research organization is likely to face in executing its tasks as an agent for the transfer of technology are discussed. An appreciation of these problems would enable the organization to restructure its priorities so as to achieve maximum effectiveness. The various ways by which the national research organization can speed up the task of transfer of technology are also discussed

Heat Transfer in Pebble-Bed Nuclear Reactor Cores Cooled by Fluoride Salts

Science.gov (United States)

Huddar, Lakshana Ravindranath

With electricity demand predicted to rise by more than 50% within the next 20 years and a burgeoning world population requiring reliable emissions-free base-load electricity, can we design advanced nuclear reactors to help meet this challenge? At the University of California, Berkeley (UCB) Fluoride-salt-cooled High Temperature Reactors (FHR) are currently being investigated. FHRs are designed with better safety and economic characteristics than conventional light water reactors (LWR) currently in operation. These reactors operate at high temperature and low pressure making them more efficient and safer than LWRs. The pebble-bed FHR (PB-FHR) variant includes an annular nuclear reactor core that is filled with randomly packed pebble fuel. It is crucial to characterize the heat transfer within this unique geometry as this informs the safety limits of the reactor. The work presented in this dissertation focused on furthering the understanding of heat transfer in pebble-bed nuclear reactor cores using fluoride salts as a coolant. This was done through experimental, analytical and computational techniques. A complex nuclear system with a coolant that has never previously been in commercial use requires experimental data that can directly inform aspects of its design. It is important to isolate heat transfer phenomena in order to understand the underlying physics in the context of the PB-FHR, as well as to make decisions about further experimental work that needs to be done in support of developing the PB-FHR. Certain organic oils can simulate the heat transfer behaviour of the fluoride salt if relevant non-dimensional parameters are matched. The advantage of this method is that experiments can be done at a much lower temperature and at a smaller geometric scale compared to FHRs, thereby lowering costs. In this dissertation, experiments were designed and performed to collect data demonstrating similitude. The limitations of these experiments were also elucidated by

Development of the fundamental techniques for nuclear forensics

Energy Technology Data Exchange (ETDEWEB)

Park, Jongho; Song, Kyuseok; Ha, Younggeun; Lee, Sunyoung; Choi, Heedong

2013-08-15

The main goal of this project is to develop the fundamental techniques of physical and chemical analysis of the target materials, and data interpretation methods to identify the origin and the production attributions of intercepted illicit nuclear or radioactive materials. This also includes production of analytical data for domestic nuclear materials to be used in establishment of national nuclear material data library. As the result of the R and D of this project, we developed the analytical techniques for H and O isotopes to identify the origin of the target samples, the techniques of chemical treatments of water type and soil type samples, and the fundamental research on the gamma spectroscopy for nuclear forensics. We also performed the study on the national collaboration plan on nuclear forensics, and fundamental research and the target materials and analytical requirements for analytical data production of domestic nuclear materials to construct a national data library. Most of the R and D's in the schedule of this project have not been performed due to the early termination of the project by the decision of the government.

Development of the fundamental techniques for nuclear forensics

International Nuclear Information System (INIS)

Park, Jongho; Song, Kyuseok; Ha, Younggeun; Lee, Sunyoung; Choi, Heedong

2013-08-01

The main goal of this project is to develop the fundamental techniques of physical and chemical analysis of the target materials, and data interpretation methods to identify the origin and the production attributions of intercepted illicit nuclear or radioactive materials. This also includes production of analytical data for domestic nuclear materials to be used in establishment of national nuclear material data library. As the result of the R and D of this project, we developed the analytical techniques for H and O isotopes to identify the origin of the target samples, the techniques of chemical treatments of water type and soil type samples, and the fundamental research on the gamma spectroscopy for nuclear forensics. We also performed the study on the national collaboration plan on nuclear forensics, and fundamental research and the target materials and analytical requirements for analytical data production of domestic nuclear materials to construct a national data library. Most of the R and D's in the schedule of this project have not been performed due to the early termination of the project by the decision of the government

Improvement of ground water management and protection through the use of isotope and Nuclear Techniques

International Nuclear Information System (INIS)

El Samad, O.

2009-01-01

To establish nuclear techniques for the study and management of water resources including technology transfer; to develop a national strategy for the use of isotope techniques in water management and development studies; to develop a water mangement framework; to solve problems related to water shortage, overexploitation, management and rapid quality deterioration; to evaluate the sources, recharge rates and renewal of ground water reservoires; to resolve the problems of mixed aquifers, the quantity of mixing and the exchange reactions between groundwater reservoirs and their matrix; to strengthen the role of the CNRS within national instituions and water authorities. (author)

A practical approach to the transfer of nuclear technology

International Nuclear Information System (INIS)

Segerberg, F.

1978-01-01

The paper deals specifically with the transfer of light-water reactor technology to a developing country. The technology transfer scheme presented assumes that Sweden is the supplier of this technology. The basis of the proposed approach is that hardware deliveries for nuclear power plants in the recipient country should constitute an activity in parallel with the general technology transfer. It is pointed out that the developing countries form a very heterogeneous group with respect to industrial capability. On the other hand the supplier nations are not a homogeneous group. Sweden's most relevant characteristics as supplier nation can be summarized under the following headings: (i) fairly small and highly industrialized country; (ii) concentration on nuclear power to cover increasing electricity demands; (iii) independent reactor technology; (iv) well-established infrastructure with regard to component manufacturing; (v) political neutrality. It follows that each combination of two countries constitutes a unique example. The nuclear technology transfer schemes must consequently be extremely flexible. The paper outlines a 'modular' system. This concept means that the supplier offers a great variety of independent courses, training opportunities, facilities etc. which can then be combined into a package meeting the wishes of the recipient nation. The components in a Swedish package of this kind are elaborated. The paper ends with the general conclusion that Sweden has so far been successful in combining high national ambitions with limited manpower and limited financial resources. The underlying efficiency and flexibility will hopefully make Sweden an attractive partner for developing countries. (author)

Perspectives of heat transfer enhancement in nuclear reactors toward nanofluids applications

International Nuclear Information System (INIS)

Rocha, Marcelo S.; Cabral, Eduardo L.L.; Sabundjian, Gaiane

2013-01-01

Nanofluids are colloidal suspensions of nanoparticles in a base fluid with interesting physical properties and large potential for heat transfer enhancement in thermal systems among other applications. There are an increasing number of nanofluids investigations concerning many aspects of synthesis and fabrication technologies, physical properties, and special applications. Results demonstrate that physical properties like high thermal conductivities and high critical heat flux (CHF) of some nanofluids classifies them as potential working fluids for high heat flux transportation in special systems, including thermal management of microelectronic devices (MEMS) and nuclear reactors. Understanding the importance of such investigations for the knowledge development of nuclear engineering a new research is being conducted at the Nuclear Engineering Center (CEN) of the Nuclear and Energy Research Institute (IPEN/CNEN-SP) to analyze the application potentiality of some nanofluids in nuclear systems for heat transfer enhancement under ionizing radiation influence. In this work a revision of theoretical and experimental studies of nanofluids is performed and its potentiality for using in future generations of nuclear reactors is highlighted showing the status of the research at present. (author)

Nuclear Effects in Neutrino Interactions at Low Momentum Transfer

Energy Technology Data Exchange (ETDEWEB)

Miltenberger, Ethan Ryan [Univ. of Minnesota, Minneapolis, MN (United States)

2015-05-01

This is a study to identify predicted effects of the carbon nucleus environment on neutrino - nucleus interactions with low momentum transfer. A large sample of neutrino interaction data collected by the MINERvA experiment is analyzed to show the distribution of charged hadron energy in a region with low momentum transfer. These distributions reveal a major discrepancy between the data and a popular interaction model with only the simplest Fermi gas nuclear effects. Detailed analysis of systematic uncertainties due to energy scale and resolution can account for only a little of the discrepancy. Two additional nuclear model effects, a suppression/screening effect (RPA), and the addition of a meson exchange current process (MEC), are shown to improve the description of the data.

Nuclear transfer to prevent mitochondrial DNA disorders: revisiting the debate on reproductive cloning.

Science.gov (United States)

Bredenoord, A L; Dondorp, W; Pennings, G; De Wert, G

2011-02-01

Preclinical experiments are currently performed to examine the feasibility of several types of nuclear transfer to prevent mitochondrial DNA (mtDNA) disorders. Whereas the two most promising types of nuclear transfer to prevent mtDNA disorders, spindle transfer and pronuclear transfer, do not amount to reproductive cloning, one theoretical variant, blastomere transfer does. This seems the most challenging both technically and ethically. It is prohibited by many jurisdictions and also the scientific community seems to avoid it. Nevertheless, this paper examines the moral acceptability of blastomere transfer as a method to prevent mtDNA disorders. The reason for doing so is that most objections against reproductive cloning refer to reproductive adult cloning, while blastomere transfer would amount to reproductive embryo cloning. After clarifying this conceptual difference, this paper examines whether the main non-safety objections brought forward against reproductive cloning also apply in the context of blastomere transfer. The conclusion is that if this variant were to become safe and effective, dismissing it because it would involve reproductive cloning is unjustified. Nevertheless, as it may lead to more complex ethical appraisals than the other variants, researchers should initially focus on the development of the other types of nuclear transfer to prevent mtDNA disorders. Copyright © 2010 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Towards convective heat transfer enhancement: surface modification, characterization and measurement techniques

NARCIS (Netherlands)

Taha, T.J.; Thakur, D.B.; van der Meer, Theodorus H.

2012-01-01

In this work, heat transfer surface modification and heat transfer measurement technique is developed. Heat transfer investigation was aimed to study the effect of carbon nano fibers (extremely high thermal conductive material) on the enhancement level in heat transfer. Synthesis of these carbon

Acoustic techniques in nuclear safeguards

International Nuclear Information System (INIS)

Olinger, C.T.; Sinha, D.N.

1995-01-01

Acoustic techniques can be employed to address many questions relevant to current nuclear technology needs. These include establishing and monitoring intrinsic tags and seals, locating holdup in areas where conventional radiation-based measurements have limited capability, process monitoring, monitoring containers for corrosion or changes in pressure, and facility design verification. These acoustics applications are in their infancy with respect to safeguards and nuclear material management, but proof-of-principle has been demonstrated in many of the areas listed

Technology transfer by industry for the construction of nuclear power plants

International Nuclear Information System (INIS)

Frewer, H.; Altvater, W.

1977-01-01

The construction of nuclear power plants call for a wide sphere of industrial activities, nuclear as well as conventional. For a specific country the ways and methods of developing an industrial nuclear power program and reaching the target of independence, will widely differ, depending on the size of the country, the economic situation, the already existing industrial manufacturing and engineering capacities, the time schedule of the program and the type of contracting. The experience in effective technology transfer for the strengthening and setting up the national industry, and the engineering capacities, needed for the construction of nuclear power plants up to the largest size existing today are considered. The German nuclear power industry gained this experience in connection with the turn-key supply of the first units in various countries. The prerequisites and national nuclear power programs were different. Based on a successful technological development, including standardization, the German nuclear power industry could meet the demand and different approaches in these countries. The main features and practices followed for the transfer of technology is described for three different cases, namely Argentina, Brazil and Iran. (author)

Contribution of nuclear techniques towards a sustainable agriculture

International Nuclear Information System (INIS)

Muniz Ugarte, O.

1997-01-01

The papers mentions the main nuclear techniques applied in order to achieve a sustainable agriculture, the technical support given to Cuba by the IAEA mainly in training and in the creation of a infrastructure (Laboratories) to enable the application of nuclear techniques to agricultural research related to soil fertility, plant nutrition and water usage

Somatic cell nuclear transfer: Infinite reproduction of a unique diploid genome

International Nuclear Information System (INIS)

Kishigami, Satoshi; Wakayama, Sayaka; Hosoi, Yoshihiko; Iritani, Akira; Wakayama, Teruhiko

2008-01-01

In mammals, a diploid genome of an individual following fertilization of an egg and a spermatozoon is unique and irreproducible. This implies that the generated unique diploid genome is doomed with the individual ending. Even as cultured cells from the individual, they cannot normally proliferate in perpetuity because of the 'Hayflick limit'. However, Dolly, the sheep cloned from an adult mammary gland cell, changes this scenario. Somatic cell nuclear transfer (SCNT) enables us to produce offspring without germ cells, that is, to 'passage' a unique diploid genome. Animal cloning has also proven to be a powerful research tool for reprogramming in many mammals, notably mouse and cow. The mechanism underlying reprogramming, however, remains largely unknown and, animal cloning has been inefficient as a result. More momentously, in addition to abortion and fetal mortality, some cloned animals display possible premature aging phenotypes including early death and short telomere lengths. Under these inauspicious conditions, is it really possible for SCNT to preserve a diploid genome? Delightfully, in mouse and recently in primate, using SCNT we can produce nuclear transfer ES cells (ntES) more efficiently, which can preserve the eternal lifespan for the 'passage' of a unique diploid genome. Further, new somatic cloning technique using histone-deacetylase inhibitors has been developed which can significantly increase the previous cloning rates two to six times. Here, we introduce SCNT and its value as a preservation tool for a diploid genome while reviewing aging of cloned animals on cellular and individual levels

Somatic cell nuclear transfer: infinite reproduction of a unique diploid genome.

Science.gov (United States)

Kishigami, Satoshi; Wakayama, Sayaka; Hosoi, Yoshihiko; Iritani, Akira; Wakayama, Teruhiko

2008-06-10

In mammals, a diploid genome of an individual following fertilization of an egg and a spermatozoon is unique and irreproducible. This implies that the generated unique diploid genome is doomed with the individual ending. Even as cultured cells from the individual, they cannot normally proliferate in perpetuity because of the "Hayflick limit". However, Dolly, the sheep cloned from an adult mammary gland cell, changes this scenario. Somatic cell nuclear transfer (SCNT) enables us to produce offspring without germ cells, that is, to "passage" a unique diploid genome. Animal cloning has also proven to be a powerful research tool for reprogramming in many mammals, notably mouse and cow. The mechanism underlying reprogramming, however, remains largely unknown and, animal cloning has been inefficient as a result. More momentously, in addition to abortion and fetal mortality, some cloned animals display possible premature aging phenotypes including early death and short telomere lengths. Under these inauspicious conditions, is it really possible for SCNT to preserve a diploid genome? Delightfully, in mouse and recently in primate, using SCNT we can produce nuclear transfer ES cells (ntES) more efficiently, which can preserve the eternal lifespan for the "passage" of a unique diploid genome. Further, new somatic cloning technique using histone-deacetylase inhibitors has been developed which can significantly increase the previous cloning rates two to six times. Here, we introduce SCNT and its value as a preservation tool for a diploid genome while reviewing aging of cloned animals on cellular and individual levels.

Fluxes of radionuclides in the agricultural production after a nuclear accident: countermeasures and decontamination techniques

International Nuclear Information System (INIS)

Jouve, A.

1997-01-01

This thesis deals with the radiological consequences of a nuclear accident through the radioactive contamination of the food chain and the subsequent countermeasures for decreasing the fluxes of radionuclides and decontaminating agricultural lands. After a brief summary of the radioprotection ground and context in case of a nuclear accident, this work surveys existing data on the fluxes of radionuclides in soils and from soil to plants. The research work focuses on both the prediction of the fluxes of radionuclides and possible countermeasures: the measurement of the bioavailability of radionuclides in the soil solution, its use in a mathematical expression to quantify the soil-to-plant transfer of caesium and strontium, and the perspectives of an innovative technique of soil decontamination. The obtained results show that based on 4 coefficients, it is possible to predict crop contamination within a 3 % confidence interval: the fluid solid distribution coefficient of radionuclides kd, the amount of chemical analogues of caesium and strontium, i.e. potassium and calcium, respectively, soil pH and a constant characterising the plant species that is concerned. However, it generally appears from soil to plant transfer studies that the reduction of the fluxes of radionuclides is not a promising way of radiological exposure mitigation after a nuclear accident. The work performed shows that it is more efficient to tackle the source of the contamination, i.e. decontaminate the soil. The proposed technique of soil scraping using a turf harvester appears to be the most advantageous among the tested options, for the decontamination of peat-bog meadows. (author)

Nuclear fuel pellet transfer escalator

International Nuclear Information System (INIS)

Huggins, T.B. Sr.; Roberts, E.; Edmunds, M.O.

1991-01-01

This patent describes a nuclear fuel pellet escalator for loading nuclear fuel pellets into a sintering boat. It comprises a generally horizontally-disposed pellet transfer conveyor for moving pellets in single file fashion from a receiving end to a discharge end thereof, the conveyor being mounted about an axis at its receiving end for pivotal movement to generally vertically move its discharge end toward and away from a sintering boat when placed below the discharge end of the conveyor, the conveyor including an elongated arm swingable vertically about the axis and having an elongated channel recessed below an upper side of the arm and extending between the receiving and discharge ends of the conveyor; a pellet dispensing chute mounted to the arm of the conveyor at the discharge end thereof and extending therebelow such that the chute is carried at the discharge end of the conveyor for generally vertical movement therewith toward and away from the sintering boat

Recent advances in nuclear techniques for environmental radioactivity monitoring

International Nuclear Information System (INIS)

Kumar, Ajay; Tripathi, R.M.

2016-01-01

The environmental radioactivity monitoring was first started in the late 1950s following the global fallout from testing of nuclear weapons in the atmosphere. Nuclear analytical techniques are generally classified into two categories: destructive and non-destructive. Destructive techniques are carried out through several analytical methods such as α-spectrometry, liquid Scintillation counting system, solid state nuclear track detector, spectrophotometry, fluorimetry, atomic absorption spectrometry (AAS), inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma optical emission spectrometry (ICP-OES), chromatography techniques, electro-analytical techniques etc. However, nondestructive methods include gamma spectrometry, X-Ray fluorescence (XRF) spectrometry, neutron activation analysis (NAA) etc. The development of radiochemical methods and measurement techniques using alpha and gamma spectrometry have been described in brief

How do laboratory embryo transfer techniques affect IVF outcomes? A review of current literature.

Science.gov (United States)

Sigalos, George; Triantafyllidou, Olga; Vlahos, Nikos

2017-04-01

Over the last few years, many studies have focused on embryo selection methods, whereas little attention has been given to the standardization of the procedure of embryo transfer. In this review, several parameters of the embryo transfer procedure are examined, such as the: (i) culture medium volume and loading technique; (ii) syringe and catheters used for embryo transfer; (iii) viscosity and composition of the embryo transfer medium; (iv) environment of embryo culture; (v) timing of embryo transfer; (vi) and standardization of the embryo transfer techniques. The aim of this manuscript is to review these factors and compare the existing embryo transfer techniques and highlight the need for better embryo transfer standardization.

Nuclear forensics: strategies and analytical techniques

International Nuclear Information System (INIS)

Marin, Rafael C.; Sarkis, Jorge E.S.; Pestana, Rafael C.B.

2013-01-01

The development of nuclear forensics as a field of science arose in response to international demand for methods to investigate the illicit trafficking of nuclear materials. After being seized, unknown nuclear material is collected and analyzed by a set of analytical methods. The fingerprints of these materials can be identified and further used during the investigations. Data interpretation is an extensive process aiming to validate the hypotheses made by the experts, and can help confirm the origin of seized nuclear materials at the end of the process or investigation. This work presents the set of measures and analytical methods that have been inherited by nuclear forensics from several fields of science. The main characteristics of these methods are evaluated and the analytical techniques employed to determine the fingerprint of nuclear materials are described. (author)

Economics on nuclear techniques application in industry

International Nuclear Information System (INIS)

Kato, Masao

1979-01-01

The economics of the application of nuclear techniques to industry is discussed. Nuclear techniques were applied to gauging (physical measurement), analysis, a radioactive tracer method, electrolytic dissociation, and radiography and were found to be very economical. They can be applied to manufacturing, mining, oceano-engineering, environmental engineering, and construction, all of which have a great influence on economics. However, because the application of a radioactive tracer technique does not have a direct influence on economics, it is difficult to estimate how beneficial it is. The cost-benefit ratio method recommended by IAEA was used for economical calculations. Examples of calculations made in gauging and analysis are given. (Ueda, J.)

Heat transfer enhancement for spent nuclear fuel assembly disposal packages using metallic void fillers: A prevention technique for solidification shrinkage-induced interfacial gaps

Energy Technology Data Exchange (ETDEWEB)

Park, Yongsoo, E-mail: yspark@alum.mit.edu; McKrell, Thomas J.; Driscoll, Michael J.

2017-06-15

This study considers replacing the externally accessible void spaces inside a disposal package containing a spent nuclear fuel assembly (SNFA) with high heat conducting metal to increase the effective thermal conductivity of the package and simplify the heat transfer mechanism inside the package by reducing it to a conduction dominant problem. The focus of the study is on preventing the gaps adjacent to the walls of the package components, produced by solidification shrinkage of poured liquid metal. We approached the problem by providing a temporary coating layer on the components to avoid direct build-up of thick metal oxides on their surface to promote metallic bonding at the interfaces under a non-inert environment. Laboratory scale experiments without SNFA were performed with Zn coated low carbon steel canisters and Zamak-3 void filler under two different filling temperature conditions – below and above the melting point of Zn (designated BMP and AMP respectively). Gap formation was successfully prevented in both cases while we confirmed an open gap in a control experiment, which used an uncoated canister. Minor growth of Al-Fe intermetallic phases was observed at the canister/filler interface of the sample produced under the BMP condition while their growth was significant and showed irregularly distributed morphology in the sample produced under the AMP condition, which has a potential to mitigate excessive residual stresses caused by shrinkage prevention. A procedure for the full-scale application was specified based on the results. - Highlights: •A void filling technique is introduced to enhance SNFA package heat transfer. •The technique is demonstrated via experiments using the Fe-Al-Zn system. •A procedure for the full scale application is proposed based on the results.

Use of nuclear techniques in studies of soil-plant relationships

International Nuclear Information System (INIS)

Hardarson, G.

1990-01-01

The major limitation facing researchers in the developing countries when trying to benefit from the use of isotope and radiation methods for solving problems in their countries is the lack of technical information. Training courses are very efficient for transferring technology to the developing countries. The Soil Fertility, Irrigation and Crop Production Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture and the Soil Science Unit of the IAEA Seibersdorf Laboratory have technical responsibility for organizing training courses on the use of isotopes in soil fertility and plant nutrition research. These courses have been held annually since 1978 until the present with two additional specialized courses conducted in the years 1985 and 1986 on biological nitrogen fixation. This manual was compiled from some of the lectures and practical exercises presented at these courses. Contents: Stable and radioactive isotopes. Field experimentation in isotope-aided studies. Sample preparation techniques of biological material for isotope analysis. Methods for 15 N determination. Isotope techniques in soil fertility and plant nutrition studies. Use of 15 N methodology to assess biological nitrogen fixation. Techniques in studies of photosynthesis. Use of neutron water and gamma density gauges in soil water studies. Refs, figs and tabs

A facile alternative technique for large-area graphene transfer via sacrificial polymer

Directory of Open Access Journals (Sweden)

Eric Auchter

2017-12-01

Full Text Available A novel method of transferring large-area graphene sheets onto a variety of substrates using Formvar (polyvinyl formal is presented. Due to the ease at which formvar can be dissolved in chloroform this method allows for a consistent, a clean, and a more rapid transfer than other techniques including the PMMA assisted one. This novel transfer method is demonstrated by transferring large-area graphene onto a range of substrates including commercial TEM grids, silicon dioxide and glass. Raman spectroscopy was used to confirm the presence of graphene and characterize the morphological properties of the large-area sheets. SEM and AFM analyses demonstrated the effectiveness of our rapid transfer technique for clean crystalline large-area graphene sheets. The removal of the sacrificial polymer was found to be one to two orders of magnitude faster than PMMA methods. Ultimately this facile transfer technique offers new opportunities for a wide range of applications for large-area graphene through the utilization of a new sacrificial polymer.

Handling and transfer operations for partially-spent nuclear fuel

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, J K [PUSPATI, Kuala Lumpur (Malaysia)

1983-12-01

This project involved the handling and transfer of partially-spent reactor fuel from the Oregon State University TRIGA Reactor in Corvallis, Oregon to Hanford Engineering Development Laboratory in Richland, Washington. The method of handling is dependent upon the burn-up history of the fuel elements. Legal constraints imposed by standing U.S. nuclear regulations determine the selection of transport containers, transportation procedures, physical security arrangements in transit and nuclear material accountability documentation. Results of in-house safety evaluations of the project determine the extent of involvement of pertinent nuclear regulatory authorities. The actual handling activities and actual radiation dose rates are also presented.

Time-series-analysis techniques applied to nuclear-material accounting

International Nuclear Information System (INIS)

Pike, D.H.; Morrison, G.W.; Downing, D.J.

1982-05-01

This document is designed to introduce the reader to the applications of Time Series Analysis techniques to Nuclear Material Accountability data. Time series analysis techniques are designed to extract information from a collection of random variables ordered by time by seeking to identify any trends, patterns, or other structure in the series. Since nuclear material accountability data is a time series, one can extract more information using time series analysis techniques than by using other statistical techniques. Specifically, the objective of this document is to examine the applicability of time series analysis techniques to enhance loss detection of special nuclear materials. An introductory section examines the current industry approach which utilizes inventory differences. The error structure of inventory differences is presented. Time series analysis techniques discussed include the Shewhart Control Chart, the Cumulative Summation of Inventory Differences Statistics (CUSUM) and the Kalman Filter and Linear Smoother

Nuclear analysis techniques as a component of thermoluminescence dating

Energy Technology Data Exchange (ETDEWEB)

Prescott, J R; Hutton, J T; Habermehl, M A [Adelaide Univ., SA (Australia); Van Moort, J [Tasmania Univ., Sandy Bay, TAS (Australia)

1997-12-31

In luminescence dating, an age is found by first measuring dose accumulated since the event being dated, then dividing by the annual dose rate. Analyses of minor and trace elements performed by nuclear techniques have long formed an essential component of dating. Results from some Australian sites are reported to illustrate the application of nuclear techniques of analysis in this context. In particular, a variety of methods for finding dose rates are compared, an example of a site where radioactive disequilibrium is significant and a brief summary is given of a problem which was not resolved by nuclear techniques. 5 refs., 2 tabs.

Nuclear analysis techniques as a component of thermoluminescence dating

Energy Technology Data Exchange (ETDEWEB)

Prescott, J.R.; Hutton, J.T.; Habermehl, M.A. [Adelaide Univ., SA (Australia); Van Moort, J. [Tasmania Univ., Sandy Bay, TAS (Australia)

1996-12-31

In luminescence dating, an age is found by first measuring dose accumulated since the event being dated, then dividing by the annual dose rate. Analyses of minor and trace elements performed by nuclear techniques have long formed an essential component of dating. Results from some Australian sites are reported to illustrate the application of nuclear techniques of analysis in this context. In particular, a variety of methods for finding dose rates are compared, an example of a site where radioactive disequilibrium is significant and a brief summary is given of a problem which was not resolved by nuclear techniques. 5 refs., 2 tabs.

Expression of a transferred nuclear gene in a mitochondrial genome

Directory of Open Access Journals (Sweden)

Yichun Qiu

2014-08-01

Full Text Available Transfer of mitochondrial genes to the nucleus, and subsequent gain of regulatory elements for expression, is an ongoing evolutionary process in plants. Many examples have been characterized, which in some cases have revealed sources of mitochondrial targeting sequences and cis-regulatory elements. In contrast, there have been no reports of a nuclear gene that has undergone intracellular transfer to the mitochondrial genome and become expressed. Here we show that the orf164 gene in the mitochondrial genome of several Brassicaceae species, including Arabidopsis, is derived from the nuclear ARF17 gene that codes for an auxin responsive protein and is present across flowering plants. Orf164 corresponds to a portion of ARF17, and the nucleotide and amino acid sequences are 79% and 81% identical, respectively. Orf164 is transcribed in several organ types of Arabidopsis thaliana, as detected by RT-PCR. In addition, orf164 is transcribed in five other Brassicaceae within the tribes Camelineae, Erysimeae and Cardamineae, but the gene is not present in Brassica or Raphanus. This study shows that nuclear genes can be transferred to the mitochondrial genome and become expressed, providing a new perspective on the movement of genes between the genomes of subcellular compartments.

Transfer of nuclear technology to the developing countries

International Nuclear Information System (INIS)

Cisse, A.M.

1977-01-01

The increased Agency assistance for transfer of nuclear technology is essential for the developing countries and especially Africa. It would have a beneficial effect on the implementation of training programmes. The introduction of teaching in nuclear physics at universities in Nigeria, Tanzania and Madagascar should be extended to other universities in order further to orientate African students towards nuclear sciences. In the peaceful uses of atomic energy the African States are concentrating their activities in the spheres of agriculture and medicine. The Agency assists these countries in programmes in agriculture and the exploitation of natural resources, including water. The introduction of radioisotope techniques should be accelerated at all existing agricultural research centres. Services of this kind exist in a few countries, including Senegal, Kenya, the Ivory Coast, Morocco and the Sudan. Radioisotopes employed there make it possible, in particular, to trace the movement of fertilizers from soil to plant and to measure soil humidity. Ionizing radiations can be used to produce genetic effects for the purpose of creating hew varieties of important crop plants and selecting varieties requiring less water for their growth. Such activities are naturally of the greatest interest to the African continent which, as a whole, lives basically from agriculture. The guarantee of food supplies during the next decade is a subject of concern for Africa, and the prevention of losses of foodstuffs is one of the main objectives of African policy.Food irradiation projects are being conducted in Ghana (on cocoa beans) and in Nigeria (on sweet potatoes) with the support of Agency research projects. The Agency's project on the radiation preservation of fish, at present being implemented in countries in Asia, could - provided that the results are satisfactory - have important economic repercussions for the African countries.In the medical sphere, the improvement in health

Heat transfer and mechanical interactions in fusion nuclear systems

International Nuclear Information System (INIS)

Nygren, R.E.

1984-01-01

This general review of design issues in heat transfer and mechanical interactions of the first wall, blanket and shield systems of tokamak and mirror fusion reactors begins with a brief introduction to fusion nuclear systems. The design issues are summarized in tables and the following examples are described to illustrate these concerns: the surface heating of limiters, heat transfer from solid breeders, MHD effects in liquid metal blankets, mechanical loads from electromagnetic transients and remote maintenance

Nuclear analytical techniques in medicine

International Nuclear Information System (INIS)

Cesareo, R.

1988-01-01

This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future

Nuclear techniques in food production

International Nuclear Information System (INIS)

Merlin, J.P.C.

1975-01-01

This study is divided into three parts. The first, devoted to the use of radiations in food production, deals especially with artificial mutagenesis, selectors taking advantage of altered hereditary features in plants from irradiated seed; sterilization of animals to eliminate harmful insects (male sterilization technique); the lethal power of radiations used for the production of animal vaccins, attenuated by irradiation, against organisms which infest or degrade food products. Part two shows that radioactive atoms used as tracers to reveal migrations and chemical transformations of products such as fertilizers and pesticides can speed up all kinds of agronomical research. Their possibilities in research on animal feeding and to detect poisonous substances in foodstuffs are also mentioned. The last part is devoted to the use of nuclear techniques in irrigation and more precisely in the study of underground water flows soil moisture and lastly the future of nuclear desalination [fr

Nuclear analytical techniques in medicine

Energy Technology Data Exchange (ETDEWEB)

Cesareo, R.

1988-01-01

This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future.

Heat Transfer Coefficient Variations in Nuclear Fuel Rod Bundles

International Nuclear Information System (INIS)

Conner, Michael E.; Holloway, Mary V.

2007-01-01

The single-phase heat transfer performance of a PWR nuclear fuel rod bundle is enhanced by the use of mixing vanes attached to the downstream edges of the support grid straps. This improved single-phase performance will delay the onset of nucleate boiling, thereby reducing corrosion and delaying crud-related issues. This paper presents the variation in measured single-phase heat transfer coefficients (HTC) for several grid designs. Then, this variation is compared with observations of actual in-core crud patterns. While crud deposition is a function of a number of parameters including rod heat flux, the HTC is assumed to be a primary factor in explaining why crud deposition is a local phenomenon on nuclear fuel rods. The data from this study will be used to examine this assumption by providing a comparison between HTC variations and crud deposition patterns. (authors)

Nuclear structure effects in multi-nucleon transfer and sequential fission reactions

International Nuclear Information System (INIS)

Biswas, D.C.

2001-01-01

The role of the nuclear structure in multi-nucleon transfer and sequential fission reactions has been discussed. The recent results on multi-nucleon transfer and transfer induced fission reaction, have brought out many interesting features in understanding the reaction mechanism and collective dynamics of heavy ion reactions. The structure of the projectile nucleus has strong influence on the transfer of multi-nucleons and/or clusters from the projectile to the target. The mechanism of multi-nucleon transfer between two heavy nuclei is a complex process which has a strong dependence on the ground state Q-value of the reaction as well as on the number of transferred nucleons

Use of nuclear techniques in biological control

International Nuclear Information System (INIS)

Greany, Patrick D.; Carpenter, James E.

2000-01-01

As pointed out by Benbrook (1996), pest management is at a crossroads, and there is a great need for new, biointensive pest management strategies. Among these approaches, biological control is a keystone. However, because of increasing concerns about the introduction of exotic natural enemies of insect pests and weeds (Howarth 1991, Delfosse 1997), the overall thrust of biological control has moved toward augmentative biological control, involving releases of established natural enemy species (Knipling 1992). This in turn has created a need to develop more cost-effective mass rearing technologies for beneficial insects. Nuclear techniques could play an especially important role in augmentative biological control, not only in facilitating mass rearing, but in several other ways, as indicated below. Recognising the potential value for use of nuclear techniques in biological control, the Insect and Pest Control Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, sponsored a Consultants' Group Meeting on this subject in April 1997. The Group produced a document entitled Use of Nuclear Techniques in Biological Control: Managing Pests, Facilitating Trade and Protecting the Environment. The consultants included the authors of this paper as well as Ernest Delfosse (at that time, with the USDA-APHIS National Biological Control Institute), Garry Hill (Intl. Institute for Biological Control), Sinthya Penn (Beneficial Insectary), and Felipe Jeronimo (USDA-APHIS PPQ, Guatemala). The remarks presented in this paper reflect the thoughts presented by these consultants and other participants at the IAEA-sponsored meeting. Several potential uses for nuclear techniques were identified by the Consultants' Group, including: 1) improvements in rearing media (either artificial diets or natural hosts/prey), 2) provision of sterilised natural prey to be used as food during shipment, to ameliorate concerns relating to the

Process techniques of charge transfer time reduction for high speed CMOS image sensors

International Nuclear Information System (INIS)

Cao Zhongxiang; Li Quanliang; Han Ye; Qin Qi; Feng Peng; Liu Liyuan; Wu Nanjian

2014-01-01

This paper proposes pixel process techniques to reduce the charge transfer time in high speed CMOS image sensors. These techniques increase the lateral conductivity of the photo-generated carriers in a pinned photodiode (PPD) and the voltage difference between the PPD and the floating diffusion (FD) node by controlling and optimizing the N doping concentration in the PPD and the threshold voltage of the reset transistor, respectively. The techniques shorten the charge transfer time from the PPD diode to the FD node effectively. The proposed process techniques do not need extra masks and do not cause harm to the fill factor. A sub array of 32 × 64 pixels was designed and implemented in the 0.18 μm CIS process with five implantation conditions splitting the N region in the PPD. The simulation and measured results demonstrate that the charge transfer time can be decreased by using the proposed techniques. Comparing the charge transfer time of the pixel with the different implantation conditions of the N region, the charge transfer time of 0.32 μs is achieved and 31% of image lag was reduced by using the proposed process techniques. (semiconductor devices)

Order of 28 March 1980 on the transfer to ENUSA of duties of the Junta de Energia Nuclear connected with the nuclear fuel cycle

International Nuclear Information System (INIS)

1980-01-01

In implementation of the Royal Decree of 7 December 1979 the Minister of Industry and Energy made this Order regulating the transfer to ENUSA (National Uranium Undertaking) of the Junta de Energia Nuclear's duties relating to the nuclear fuel cycle. The Order sets up, within the Ministry of Industry and Energy, a Transfer Commission responsible for establishing the directives prior to the measures to be taken by the Ministry concerning the transfer to ENUSA of the duties, personnel and establishments of the Junta connected with the nuclear fuel cycle. It will also determine the dates of such transfer, according to the order of priority laid down in the Order. (NEA) [fr

Techniques and methods in nuclear materials traceability

International Nuclear Information System (INIS)

Persiani, P.J.

1996-01-01

The nonproliferation community is currently addressing concerns that the access to special nuclear materials may increase the illicit trafficking in weapons-usable materials from civil and/or weapons material stores and/or fuel cycles systems. Illicit nuclear traffic usually involves reduced quantities of nuclear materials perhaps as samplings of a potential protracted diversionary flow from sources to users. To counter illicit nuclear transactions requires the development of techniques and methods in nuclear material traceability as an important phase of a broad forensic analysis capability. This report discusses how isotopic signatures and correlation methods were applied to determine the origins of Highly Enriched Uranium (HEU) and Plutonium samples reported as illicit trafficking in nuclear materials

Human somatic cell nuclear transfer and reproductive cloning: an Ethics Committee opinion.

Science.gov (United States)

2016-04-01

This document presents arguments that conclude that it is unethical to use somatic cell nuclear transfer (SCNT) for infertility treatment due to concerns about safety; the unknown impact of SCNT on children, families, and society; and the availability of other ethically acceptable means of assisted reproduction. This document replaces the ASRM Ethics Committee report titled, "Human somatic cell nuclear transfer and cloning," last published in Fertil Steril 2012;98:804-7. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Introduction to nuclear techniques in agronomy and plant biology

International Nuclear Information System (INIS)

Vose, P.B.

1980-01-01

The subject is covered in chapters, entitled: nature of isotopes and radiation; nuclear reactions; working with radioisotopes; detection systems and instrumentation; radioassay; radioisotopes and tracer principles; stable isotopes as tracers - mainly the use of 15 N; activation analysis for biological samples; x-ray fluorescence spectrography for plants and soils; autoradiography; isotopes in soils studies; isotopic tracers in field experimentation; nuclear techniques in plant science; nuclear techniques for soil water; radiation and other induced mutation in plant breeding. (author)

Handling and transfer operations for partially-spent nuclear fuel

International Nuclear Information System (INIS)

Ibrahim, J.K.

1983-01-01

This project involved the handling and transfer of partially-spent reactor fuel from the Oregon State University TRIGA Reactor in Corvallis, Oregon to Hanford Engineering Development Laboratory in Richland, Washington. The method of handling is dependent upon the burn-up history of the fuel elements. Legal constraints imposed by standing U.S. nuclear regulations determine the selection of transport containers, transportation procedures, physical security arrangements in transit and nuclear material accountability documentation. Results of in-house safety evaluations of the project determine the extent of involvement of pertinent nuclear regulatory authorities. The actual handling activities and actual radiation dose rates are also presented (author)

Technical and economic benefits of nuclear techniques in ore processing

International Nuclear Information System (INIS)

1989-08-01

This report is the outcome of an Advisory Group Meeting organized by the Agency and hosted by the Institute of Physics and Nuclear Techniques, the Academy of Mining and Metallurgy in Krakow, Poland. The purpose of the meeting was to assess the technical and economic benefits of applying nuclear techniques in ore processing industry. Nucleonic control systems and nuclear on-line analytical techniques as well as radioisotope tracer tests and their applications in metallic ore-processing, coal production, and cement fabrication were discussed. This report contains a summary and the presentations dealing with nuclear techniques for process control made at this meeting. Using a number of case-histories as examples, it illustrates technical and economic benefits obtainable by the installation of nuclear process control instrumentation. It is expected to be useful for everybody dealing with ore and coal production, but especially for administrative personnel and engineers who plan and implement national development programmes related to mineral resources. Refs, figs and tabs

Gas separation techniques in nuclear facilities

International Nuclear Information System (INIS)

Hioki, Hideaki; Morisue, Tetsuo; Ohno, Masayoshi

1983-01-01

The literatures concerning the gas separation techniques which are applied to the waste gases generated from nuclear power plants and nuclear fuel reprocessing plants, uranium enrichment and the instrumentation of nuclear facilities are reviewed. The gas permeability and gas separation performance of membranes are discussed in terms of rare gas separation. The investigation into the change of the gas permeability and mechanical properties of membranes with exposure to radiation is reported. The theoretical investigation of the separating cells used for the separation of rare gas and the development of various separating cells are described, and the theoretical and experimental investigations concerning rare gas separation using cascades are described. The application of membrane method to nuclear facilities is explained showing the examples of uranium enrichment, the treatment of waste gases from nuclear reactor buildings and nuclear fuel reprocessing plants, the monitoring of low level β-emitters in stacks, the detection of failed fuels and the detection of water leak in fast breeder reactors. (Yoshitake, I.)

Cuban agriculture and nuclear techniques

International Nuclear Information System (INIS)

Labrada Remon, A.; Perez Talavera, S.

1997-01-01

The application of nuclear techniques to agriculture emerged in Cuba at the end of the 60s. At the beginning only few researchers used these techniques for stimulating or mutational purposes. At the end of the 80 s systematic research began for its possible application to existing agricultural problems among which we can highlight radiomutable genesis and the determination of diagnostic damage of seeds by x-rays, plant nutrition and soil fertility, efficient water use, animal nutrition, reproduction and health as well as pest control

Nuclear techniques in the study of East Coast fever (Theileria parva infection of cattle)

International Nuclear Information System (INIS)

Irvin, A.D.

1984-01-01

Nuclear techniques have been used in a variety of ways to study East Coast fever of cattle caused by the protozoan parasite Theileria parva. Macroschizonts, piroplasms and sporozoites have been radiolabelled by using different nucleic acid precursors, particularly 3 H-hypoxanthine and 3 H-thymidine. These studies have helped to elucidate cyclic changes occurring during parasite development in bovine lymphoid cells and in tick salivary glands. Attempts to attenuate parasites by irradiation have been partially successful in the case of sporozoites, and more attention should be given to an attempt to induce attenuation by irradiation of developing rather than mature sporozoites. Irradiation of macroschizont-infected cells does not appear to offer a means towards vaccine development but has proved a valuable technique in elucidating immunological mechanisms. The study of these mechanisms has also been greatly helped by nuclear techniques such as radioimmunoassay and 51 Cr-release assays. Irradiation of laboratory mice, particularly athymic nude strains, has resulted in immunosuppression of the host so that macroschizont-infected bovine lymphoid cells will grow as tumours following subcutaneous inoculation. Schizonts do not transfer to mouse cells and, until this can be achieved, the use of an athymic mouse model for East Coast fever is limited. (author)

Nuclear spin off

International Nuclear Information System (INIS)

1984-01-01

The focus for nuclear energy research in the UK has been mainly the generation of electricity. However, nuclear technology is also applied in many areas other than energy production. Nuclear Spin Off shows how technology has been transferred to industry, agriculture, medicine and other areas, creating considerable material benefit. Nuclear research has produced revolutionary new materials and measuring and detection techniques. This film shows a wide range of uses. (author)

Linear circuit transfer functions an introduction to fast analytical techniques

CERN Document Server

Basso, Christophe P

2016-01-01

Linear Circuit Transfer Functions: An introduction to Fast Analytical Techniques teaches readers how to determine transfer functions of linear passive and active circuits by applying Fast Analytical Circuits Techniques. Building on their existing knowledge of classical loop/nodal analysis, the book improves and expands their skills to unveil transfer functions in a swift and efficient manner. Starting with simple examples, the author explains step-by-step how expressing circuits time constants in different configurations leads to writing transfer functions in a compact and insightful way. By learning how to organize numerators and denominators in the fastest possible way, readers will speed-up analysis and predict the frequency resp nse of simple to complex circuits. In some cases, they will be able to derive the final expression by inspection, without writing a line of algebra. Key features: * Emphasizes analysis through employing time constant-based methods discussed in other text books but not widely us...

Chirality transfer technique between liquid crystal microdroplets using microfluidic systems

Science.gov (United States)

Guo, Jin-kun; Lee, Doyeon; Song, Jang-kun

2018-02-01

Cholesteric liquid crystal (LC) microdroplet is applied in many areas, such as tunable laser, biosensor, information display and security identification, due to its unique optical properties. The topological structure, defects, and photonic crystallinity in the cholesteric liquid crystal (LC) microdroplet can be controlled through the chirality. Here we report an interesting phenomenon that chirality information can be shared among dispersed LC microdroplets in surfactant aqueous solution, which is driven by the transferring of chiral dopant molecules. As a result, we developed an artificial molecule transfer technology which could in situ vary the material composition within the isolated dispersed microdroplets. The molecular transfer is switchable and the transfer speed is controllable by tuning the molecular solubility in continuous phase. Based on this technique, we manipulated, forward and backward, the topological evolution and the photonic crystal band-gap of the dispersed LC droplet. This technique is an easy and powerful experimental tool, and it may be applicable to other fields in optical application, biology, chemistry and material science.

Technology transfer. Its contribution to the Canadian nuclear industry

International Nuclear Information System (INIS)

Perryman, E.C.W.

1977-01-01

Technology transfer from the Laboratories of Atomic Energy of Canada Limited is discussed in relation to the birth and growth of the Canadian Nuclear Industry. The evolution of the laboratories and their changing emphasis during the commercialization of the CANDU reactor system is described

Participation of the national industry within a nuclear power plant program by technology transfer from the point of view of the main contractor

International Nuclear Information System (INIS)

Kopp, H.

1986-04-01

The broad scope of components needed in a nuclear power plant with various technical requirements offer a big opportunity for the participation of local industries in the construction of such plants. Depending on the existing capability of the industrial enterprises, the scope of national participation can be increased by technology transfer on all technical areas to be applied for the construction of NPPs. Such technology requires as basis a nuclear program of the country determined and supported by the government and the utilities. This program has to be defined as realistic as even possible adjoined to the future energy demand of the country. Furthermore the available capability, existing qualifications and equipment of the national industry have to be considered. On the basis of these fundamental requirements a tailormade technology transfer program has to be elaborated in close cooperation with an experienced main contractor of the plant and his partners for such technology transfer and should be established afterwards. This program has to consider not only the goal to achieve finally the independent production of components and equipment for NPPs or the construction of complete power plant units itself, but also the economic benefit of such a program for the country. The costs of technology transfer and the necessary investment of the national industry required for the manufacture of nuclear components have to be thoroughly investigated, based on the expected scope of products to be manufactured for the nuclear power plants according to the nuclear program. Furthermore the application of the technology transferred for other components e.g. for conventional power stations, mineral-oil or chemical industrial plants has to be considered. By a tailormade nuclear technology transfer program, executed by qualified and experienced partners not only the quality of the products of the national industry for NPPs will be improved, but also the general standard regarding

Scintigraphic instruments and techniques in nuclear medicine

International Nuclear Information System (INIS)

Bornand, B.; Soussaline, F.

1977-03-01

The development of new radiopharmaceuticals, cyclotron-produced radionuclides and improvement of detector, scanner and gamma camera characteristics have enable a remarkable recent progress in scintigraphic techniques for organ visualization and functional studies. Using a variety of techniques, positron cameras, section scanners, gamma holography, tomographic imaging appear to be playing an increasing important role. Data processing techniques, for example image processing and three dimensional reconstruction have significantly increased their impact. The principal research work and advances in technique achieved up to 1972 are summarized and the subjects which have been further exploited are outlined. The main section comprises references and abstracts of articles from scientific journals and conference proceedings (191 articles and 221 papers mentioned) for the period 1972-1975 to illustrate advances in this domain: Excerpta Medica (Nuclear Medicine) Abstract Journals and Nuclear Science Abstracts (1972-1975) were used as abstracting publications. This survey is completed with an index of authors and subject-matters. Eleven thesis are mentionned in an appendix [fr

Nuclear techniques used in agricultural research in Turkey

International Nuclear Information System (INIS)

Halitligil, M.B.

1999-01-01

Nuclear techniques that are in use in agricultural research in Turkey are : a.) techniques for monitoring and assessing the environmental pollution - such as monitoring the pesticides residues in food and soil using 14 C labelled pesticide's ; also plant root investigations using 32 P; b.) techniques for reducing the impact of increased plant productivity - such as the use of N tagged chemicals for optimizing the N fertilizer use and to determine the N 2 - fixation capacities of legumes. Also improving the water management practices - such as the determination of soil water , soil moisture characteristic cures and the leaching in soils by using the neutron probe; c.) techniques for agricultural resource development - such as the use of 60 Co and 137 Cs for obtaining new genotypes. The benefits and disadvantages of the application of nuclear techniques in agricultural research will be reviewed

Technique of nuclear reactors controls

International Nuclear Information System (INIS)

Weill, J.

1953-12-01

This report deal about 'Techniques of control of the nuclear reactors' in the goal to achieve the control of natural uranium reactors and especially the one of Saclay. This work is mainly about the measurement into nuclear parameters and go further in the measurement of thermodynamic variables,etc... putting in relief the new features required on behalf of the detectors because of their use in the thermal neutrons flux. In the domain of nuclear measurement, we indicate the realizations and the results obtained with thermal neutron detectors and for the measurement of ionizations currents. We also treat the technical problem of the start-up of a reactor and of the reactivity measurement. We give the necessary details for the comprehension of all essential diagrams and plans put on, in particular, for the reactor of Saclay. (author) [fr

Nuclear power costs in the build, operate, transfer approach

International Nuclear Information System (INIS)

Aybers, M.N.; Sahin, B.

1990-01-01

The costs of nuclear power are discussed with special reference to the economic problems faced by developing countries, and the relative merit of a new accounting approach, viz., the build, operate, transfer contract model, which was proposed in Turkey for the Akkuyu nuclear power project, is illustrated. In this context, the general methodology of calculating nuclear power costs is summarized and a capital cost analysis for a 986 MW pressurized water reactor plant is given in terms of constant monetary units for the above contract model and the turnkey contract model. Adjustment of the costs taking into account regional conditions such as inflation and higher interest rates is also indicated. (orig.) [de

Achievements obtained in agricultural research by using nuclear techniques in Turkey

International Nuclear Information System (INIS)

Halitligil, M. B.

2002-01-01

Ankara Nuclear Research Center in Agriculture and Animal Sciences (ANRCAAS) is one of the four unique research centers belonging to Turkish Atomic Energy Authority. ANRCAAS is unique because it is the only center in Turkey which uses nuclear techniques as a tool to solve problems for agriculture or animal sciences which cannot be solved using conventional techniques. Training and Research in the areas of agriculture, animal science, food preservation and sterilization via nuclear techniques are among the objectives of the Center. In this paper, the research activities carried out and the achievements so far obtained in the agricultural specialties of Plant Breeding, Soil Fertility and Plant Nutrition, Plant Protection and Pesticide Residues -all by using nuclear techniques- are provided

Nuclear techniques and professional education at InSTEC

International Nuclear Information System (INIS)

Díaz Rizo, Oscar; D’Alessandro Rodríguez, Katia; Gelen Rudnikas, Alina; López Pino, Neivy; Borroto Portela, Jorge; Domínguez Catasús, Judith; Abreu Díaz, Aida M.

2015-01-01

The paper includes the most relevant results obtained by InSTEC´s Group of Nuclear Applications in the last 25 years, in the development of nuclear techniques and its application in different social areas. The impact of applied research on graduated and post graduated education in nuclear careers as well as the social recognition of the university community are presented. (author)

A fermionic molecular dynamics technique to model nuclear matter

International Nuclear Information System (INIS)

Vantournhout, K.; Jachowicz, N.; Ryckebusch, J.

2009-01-01

Full text: At sub-nuclear densities of about 10 14 g/cm 3 , nuclear matter arranges itself in a variety of complex shapes. This can be the case in the crust of neutron stars and in core-collapse supernovae. These slab like and rod like structures, designated as nuclear pasta, have been modelled with classical molecular dynamics techniques. We present a technique, based on fermionic molecular dynamics, to model nuclear matter at sub-nuclear densities in a semi classical framework. The dynamical evolution of an antisymmetric ground state is described making the assumption of periodic boundary conditions. Adding the concepts of antisymmetry, spin and probability distributions to classical molecular dynamics, brings the dynamical description of nuclear matter to a quantum mechanical level. Applications of this model vary from investigation of macroscopic observables and the equation of state to the study of fundamental interactions on the microscopic structure of the matter. (author)

Nuclear measurements, techniques and instrumentation industrial applications plasma physics and nuclear fusion. 1980-1994. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

1995-04-01

This catalogue lists all sales publications of the International Atomic Energy Agency dealing with Nuclear Measurements, Techniques and Instrumentation, with Industrial Applications (of Nuclear Physics and Engineering), and with Plasma Physics and Nuclear Fusion, issued during the period 1980-1994. Most publications are in English. Proceedings of conferences, symposia, and panels of experts may contain some papers in other languages (French, Russian, or Spanish), but all papers have abstracts in English. Price quotes are in Austrian Schillings, do not include local taxes, and are subject to change without notice. Contents cover the three main categories of (i) Nuclear Measurements, Techniques and Instrumentation (Physics, Chemistry, Dosimetry Techniques, Nuclear Analytical Techniques, Research Reactors and Particle Accelerator Applications, Nuclear Data); (ii) Industrial Applications (Radiation Processing, Radiometry, Tracers); and (iii) Plasma Physics and Nuclear Fusion

Nuclear measurements, techniques and instrumentation industrial applications plasma physics and nuclear fusion, 1980-1993. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

1994-01-01

This catalogue lists all sales publications of the International Atomic Energy Agency dealing with Nuclear Measurements, Techniques and Instrumentation, with Industrial Applications (of Nuclear Physics and Engineering), and with Plasma Physics and Nuclear Fusion, issued during the period 1980-1993. Most publications are in English. Proceedings of conferences, symposia, and panels of experts may contain some papers in other languages (French, Russian, or Spanish), but all papers have abstracts in English. Price quotes are in Austrian Schillings, do not include local taxes, and are subject to change without notice. Contents cover the three main categories of (I) Nuclear Measurements, Techniques and Instrumentation (Physics, Chemistry, Dosimetry Techniques, Nuclear Analytical Techniques, Research Reactors and Particle Accelerator Applications, Nuclear Data); (ii) Industrial Applications (Radiation Processing, Radiometry, Tracers); and (iii) Plasma Physics and Nuclear Fusion

Influences of somatic donor cell sex on and embryo development following somatic cell nuclear transfer in pigs

Directory of Open Access Journals (Sweden)

Jae-Gyu Yoo

2017-04-01

Full Text Available Objective The present study investigates pre- and post-implantation developmental competence of nuclear-transferred porcine embryos derived from male and female fetal fibroblasts. Methods Male and female fetal fibroblasts were transferred to in vitro-matured enucleated oocytes and in vitro and in vivo developmental competence of reconstructed embryos was investigated. And, a total of 6,789 female fibroblast nuclear-transferred embryos were surgically transferred into 41 surrogate gilts and 4,746 male fibroblast nuclear-transferred embryos were surgically transferred into 25 surrogate gilts. Results The competence to develop into blastocysts was not significantly different between the sexes. The mean cell number of female and male cloned blastocysts obtained by in vivo culture (143.8±10.5 to 159.2±14.8 was higher than that of in vitro culture of somatic cell nuclear transfer (SCNT groups (31.4±8.3 to 33.4±11.1. After embryo transfer, 5 pregnant gilts from each treatment delivered 15 female and 22 male piglets. The average birth weight of the cloned piglets, gestation length, and the postnatal survival rates were not significantly different (p<0.05 between sexes. Conclusion The present study found that the sex difference of the nuclear donor does not affect the developmental rate of porcine SCNT embryos. Furthermore, postnatal survivability of the cloned piglets was not affected by the sex of the donor cell.

An improved heat transfer configuration for a solid-core nuclear thermal rocket engine

International Nuclear Information System (INIS)

Clark, J.S.; Walton, J.T.; Mcguire, M.L.

1992-07-01

Interrupted flow, impingement cooling, and axial power distribution are employed to enhance the heat-transfer configuration of a solid-core nuclear thermal rocket engine. Impingement cooling is introduced to increase the local heat-transfer coefficients between the reactor material and the coolants. Increased fuel loading is used at the inlet end of the reactor to enhance heat-transfer capability where the temperature differences are the greatest. A thermal-hydraulics computer program for an unfueled NERVA reactor core is employed to analyze the proposed configuration with attention given to uniform fuel loading, number of channels through the impingement wafers, fuel-element length, mass-flow rate, and wafer gap. The impingement wafer concept (IWC) is shown to have heat-transfer characteristics that are better than those of the NERVA-derived reactor at 2500 K. The IWC concept is argued to be an effective heat-transfer configuration for solid-core nuclear thermal rocket engines. 11 refs

Tracer techniques in estimating nuclear materials holdup

International Nuclear Information System (INIS)

Pillay, K.K.S.

1987-01-01

Residual inventory of nuclear materials remaining in processing facilities (holdup) is recognized as an insidious problem for safety of plant operations and safeguarding of special nuclear materials (SNM). This paper reports on an experimental study where a well-known method of radioanalytical chemistry, namely tracer technique, was successfully used to improve nondestructive measurements of holdup of nuclear materials in a variety of plant equipment. Such controlled measurements can improve the sensitivity of measurements of residual inventories of nuclear materials in process equipment by several orders of magnitude and the good quality data obtained lend themselves to developing mathematical models of holdup of SNM during stable plant operations

Nuclear techniques in agriculture in the Philippines

International Nuclear Information System (INIS)

Medina, F.I.S. III; Medina, V.F.O.

1994-01-01

Nuclear techniques, both isotopic tracers and radiation have been utilized in the Philippine agricultural research and development to improve food production, reduce food losses and protect the environment. The Philippine Nuclear Research Institute (PNRI), a government agency has been mandated to promote the peaceful application of nuclear energy to accelerate national development. It takes the lead role in nuclear assisted agricultural research and development and has adopted a two-pronged approach for food and agricultural R and D by increasing productivity through crop improvement by mutation breeding, soil management and fertilizer uptake studies, livestock improvement; and reducing losses by pest control and food irradiation

Innovative health solutions using nuclear techniques

International Nuclear Information System (INIS)

Bailey, Dale

2013-01-01

Australian nuclear medicine is currently amongst the highest standard of anywhere in the world. Its origins here are firmly entrenched in Internal Medicine, with its emphasis on physiology and function, unlike many other countries such as the USA where a Radiology orientation dominates. In addition, Australia has been well served by extremely competent and innovative physical scientists working in universities, government research facilities (e.g., AAEC, ANSTO) and tertiary referral hospitals who have established their main affiliations as being within the highly multidisciplinary nuclear medicine community. Nuclear medicine in the past 10-15 years has experienced a massive shift towards 'hybrid' imaging - where two (or more) complementary imaging modalities, such as X-ray CT and a Positron Emission Tomography (PET) or Single Photon Emission Computed Tomography (SPECT) scanner, are combined into a functionally single device which provides high resolution spatial anatomical (form, or structure) and radionuclide distribution (function) images. In addition, the nuclear imaging techniques maintain their quantitative characteristics and thus combined structure-function imaging results in a significant improvement in diagnostic capability - looking beyond simple forms to quantifying degree of disease, e.g., malignancy of a cancer. Recently, PET scanners have been combined with NMR Imaging (MRI) and these will provide new areas of application, especially in magnetic resonance spectroscopy and radionuclide imaging. The techniques are extremely valuable in monitoring response to treatment, allowing treatments to be changed if proving ineffective. In addition, new techniques are emerging using radionuclides for therapy, combined with the improvements in imaging. This permits exquisite targeting and optimal patient selection. This talk will highlight a number of these achievements and ask the question as to what is holding back developments in Australia at present.

Nuclear measurements, techniques and instrumentation, industrial applications, plasma physics and nuclear fusion 1986-1996. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

1997-03-01

This catalogue lists all sales publications of the International Atomic Energy Agency dealing with Nuclear Measurements, Techniques, and Instrumentation, Industrial Applications, Plasma Physics and Nuclear Fusion, issued during the period 1986-1996. Most publications are in English. Proceedings of conferences, symposia and panels of experts may contain some papers in languages other than English (French, Russian or Spanish), but all of these papers have abstracts in English. Contents cover the three main areas of (i) Nuclear Measurements, Techniques and Instrumentation (Physics, Dosimetry Techniques, Nuclear Analytical Techniques, Research Reactor and Particle Accelerator Applications, and Nuclear Data), (ii) Industrial Applications (Radiation Processing, Radiometry, and Tracers), and (iii) Plasma Physics and Controlled Thermonuclear Fusion

Internal transfers of special nuclear material - March 1975

International Nuclear Information System (INIS)

Anon.

1976-01-01

Paragraph 70.51(e) of 10 CFR Part 70 requires, with certain exceptions stated in the rule, that each licensee authorized to possess more than one effective kilogram of special nuclear material (SNM) maintain certain procedures. These procedures are to include: (1) records of the quantities of SNM added to or removed from the process; (2) documentation of all transfers of SNM between material-balance areas to show the identity and quantity of SNM transferred; (3) requirements for authorized signatures on each document used to record the transfer of SNM between material-balance areas; and (4) means for control of and accounting for internal transfer documents. Paragraph 70.58(e) requires licensees to establish, maintain, and follow a system for measuring the SNM transferred between material-balance areas and item-control areas. Paragraph 70.58(f) requires that licensees have a program that evaluates and controls the quality of their measurement system. Additionally, all licensees authorized to possess SNM must comply with paragraph 70.51(b) of 10 CFR Part 70. That rule requires licensees to keep records showing, among other things, the inventory of all SNM in their possession and its location. This guide sets forth acceptable methods for controlling and documenting transfers of SNM within a plant site in order to meet the requirements listed above

Heat transfer burnout in tube-type fuel elements of nuclear power reactors

International Nuclear Information System (INIS)

Subbotin, V.; Alexeev, G.; Peskov, O.; Sapankevic, A.

1976-01-01

The conditions are formulated under which the results of the experimental research of the boilino. water heat transfer burnout carried out on models may be applied to fuel elements of nuclear reactors. Experimental material providing data on the heat transfer burnout was expanded by the results of measurements of the uneven (cosine) longitudinal distribution of heat sources. The results of the effects of helical fins or wires on heat transfer burnout are presented. (F.M.)

Heat transfer burnout in tube-type fuel elements of nuclear power reactors

Energy Technology Data Exchange (ETDEWEB)

Subbotin, V; Alexeev, G; Peskov, O; Sapankevic, A

1976-08-01

The conditions are formulated under which the results of the experimental research of the boiling. water heat transfer burnout carried out on models may be applied to fuel elements of nuclear reactors. Experimental material providing data on the heat transfer burnout was expanded by the results of measurements of the uneven (cosine) longitudinal distribution of heat sources. The results of the effects of helical fins or wires on heat transfer burnout are presented.

Nuclear analysis techniques and environmental sciences

International Nuclear Information System (INIS)

1997-10-01

31 theses are collected in this book. It introduced molecular activation analysis micro-PIXE and micro-probe analysis, x-ray fluorescence analysis and accelerator mass spectrometry. The applications about these nuclear analysis techniques are presented and reviewed for environmental sciences

Nuclear techniques using radioactive beams for biophysical studies

CERN Document Server

Stachura, Monika Kinga

Perturbed angular correlation of "-rays (PAC) spectroscopy and nuclear magnetic resonance measured by !-decay (betaNMR) spectroscopy are two very sensitive and, among life-scientists, infrequently encountered nuclear techniques. Both of them belong to the family of hyperfine techniques, which allow for measurements of the interactions of extra-nuclear electromagnetic fields with the nuclear moments. In this way - they can provide useful information about the local structure of the investigated systems. The first part of the work presented here focuses on investigating the fundamental chemistry of heavy metal ion - protein interactions mainly with PAC spectroscopy. A variety of questions concerning both the function of metal ions in natural systems and in synthetic biomolecules on the one hand and the toxic effects of some metal ions on the other were addressed, the results of which are described in four different papers. Paper I is a review article entitled ”Selected applications of perturbed angular correl...

10th Australian conference on nuclear techniques of analysis. Proceedings

International Nuclear Information System (INIS)

1998-01-01

These proceedings contains abstracts and extended abstracts of 80 lectures and posters presented at the 10th Australian conference on nuclear techniques of analysis hosted by the Australian National University in Canberra, Australia from 24-26 of November 1997. The conference was divided into sessions on the following topics : ion beam analysis and its applications; surface science; novel nuclear techniques of analysis, characterization of thin films, electronic and optoelectronic material formed by ion implantation, nanometre science and technology, plasma science and technology. A special session was dedicated to new nuclear techniques of analysis, future trends and developments. Separate abstracts were prepared for the individual presentation included in this volume

10th Australian conference on nuclear techniques of analysis. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

These proceedings contains abstracts and extended abstracts of 80 lectures and posters presented at the 10th Australian conference on nuclear techniques of analysis hosted by the Australian National University in Canberra, Australia from 24-26 of November 1997. The conference was divided into sessions on the following topics : ion beam analysis and its applications; surface science; novel nuclear techniques of analysis, characterization of thin films, electronic and optoelectronic material formed by ion implantation, nanometre science and technology, plasma science and technology. A special session was dedicated to new nuclear techniques of analysis, future trends and developments. Separate abstracts were prepared for the individual presentation included in this volume.

Fuel transfer manipulator for liquid metal nuclear reactors

International Nuclear Information System (INIS)

Sturges, R.H.

1983-01-01

A manipulator for transferring fuel assemblies between inclined fuel chutes of a liquid metal nuclear reactor installation. Hoisting means are mounted on a mount supported by beams pivotably attached by pins to the mount and to the floor in such a manner that pivoting of the beams causes movement and tilting of a hoist tube between positions of alignment with the inclined chutes. (author)

Hyperfine interactions measured by nuclear orientation technique

International Nuclear Information System (INIS)

Brenier, R.

1982-01-01

This report concerns the use of hyperfine interaction to magnetism measurements and to the determination of the nuclear structure of Terbium isotopes by the low temperature nuclear orientation technique. In the first part we show that the rhodium atom does not support any localized moment in the chromium matrix. The hyperfine magnetic field at the rhodium nuclear site follows the Overhauser distribution, and the external applied magnetic field supports a negative Knight shift of 16%. In the second part we consider the structure of neutron deficient Terbium isotopes. We introduce a coherent way of evaluation and elaborate a new nuclear thermometer. The magnetic moments allows to strike on the studied states configuration. The analysis of our results shows a decrease of the nuclear deformation for the lighter isotopes [fr

The transfer from nuclear development

International Nuclear Information System (INIS)

Smith, L.

1993-01-01

The Department of Energy's task of cleaning up the extensive nuclear weapons complex is of such enormous proportions that there can be no definitive solution that can be adjusted to a predictable cost. The cleanup and disposition of hazardous wastes in many cases will take thirty or more years. In the near term, the economic impact affecting the communities and large number of displaced workers is a significant concern to the Department and the nation. However, before a useful transfer of DOE land, facilities, and sites to the public for economic development can be realized, a consistent and comprehensive process of compliance with regulatory requirements needs to be established. The simultaneous pursuit of these goals creates an unprecedented challenge to the Department of Energy and the US

Nuclear Knowledge Creation and Transfer in Enriched Learning Environments: A Practical Approach

International Nuclear Information System (INIS)

Ruiz, F.; Gonzalez, J.; Delgado, J.L.

2016-01-01

Full text: Technology, the social nature of learning and the generational learning style are conforming new models of training that are changing the roles of the instructors, the channels of communication and the proper learning content of the knowledge to be transferred. New training methodologies are being using in the primary and secondary education and “Vintage” classroom learning does not meet the educational requirements of these methodologies; therefore, it’s necessary to incorporate them in the Knowledge Management processes used in the nuclear industry. This paper describes a practical approach of an enriched learning environment with the purpose of creating and transferring nuclear knowledge. (author

Technology transfer of nuclear power development in developing countries: Case study of China

International Nuclear Information System (INIS)

He Jiachen; Shen Wenquan; Zhang Luqing

2000-01-01

This paper describes the specific experiences in the technology transfer of nuclear power in China, a country that both imported and developed indigenous nuclear technology. Based on this experience some recommendations are presented that should be considered particularly by the developing countries. (author)

Industrial application of nuclear techniques in Australia

International Nuclear Information System (INIS)

Easey, J.F.

1981-01-01

The applications of nuclear techniques in Australia was reviewed - the work has been to aid: mining and mineral sector, the manufacturing, chemical and petroleum industries, hydrology and sedimentology

Seismic analysis with FEM for fuel transfer system of PWR nuclear power plant

International Nuclear Information System (INIS)

Jia Xiaofeng; Liu Pengliang; Bi Xiangjun; Ji Shunying

2012-01-01

In the PWR nuclear power plant, the function of the fuel transfer system (FTS) is to transfer the fuel assembly between the reactor building and the fuel building. The seismic analysis of the transfer system structure should be carried out to ensure the safety under OBE and SSE. Therefore, the ANASYS 12.0 software is adopted to construct the finite element analysis model for the fuel transfer system in a million kilowatt nuclear power plant. For the various configurations of FTS in the operating process, the stresses of the main structures, such as the transfer tube, fuel assembly container, fuel conveyor car, lifting frame in the reactor building, lifting frame in the fuel building, support and guide structure of conveyor car and the lifting frame in both buildings, are computed. The stresses are combined with the method of square root of square sum (SRSS) and assessed under various seismic conditions based on RCCM code, the results of the assessment satisfy the code. The results show that the stresses of the fuel transfer system structure meet the strength requirement, meanwhile, it can withstand the earthquake well. (authors)

Improved biomass utilization through the use of nuclear techniques

International Nuclear Information System (INIS)

1988-10-01

Biomass is a major by-product resource of agriculture and food manufacturing, but it is under-utilized as a source of food, fibre, and chemicals. Nuclear techniques provide unique tools for studies of the capabilities of micro-organisms in methane digestor operation and in the transformation of lignocellulosic materials to useful products. Nuclear techniques have also been effectively employed as mutagenic agents in the preparation of more efficient microbial strains for the conversion of biomass. This report reviews the variety and diversity of such applications with focus on the development of microbial processes to utilize agricultural wastes and by-products. The value of nuclear techniques is manifestly demonstrated in the production of efficient microbial mutant strains, in the tracing of metabolic pathways, in the monitoring of lignin degradation and also of fermenter operation. Refs, figs and tabs

Improvement of mouse cloning using nuclear transfer-derived embryonic stem cells and/or histone deacetylase inhibitor.

Science.gov (United States)

Wakayama, Sayaka; Wakayama, Teruhiko

2010-01-01

Nuclear transfer-derived ES (ntES) cell lines can be established from somatic cell nuclei with a relatively high success rate. Although ntES cells have been shown to be equivalent to ES cells, there are ethical objections concerning human cells, such as the use of fresh oocyte donation from young healthy woman. In contrast, the use of induced pluripotent stem (iPS) cells for cloning poses few ethical problems and is a relatively easy technique compared with nuclear transfer. Therefore, although there are several reports proposing the use of ntES cells as a model of regenerative medicine, the use of these cells in preliminary medical research is waning. However, in theory, 5 to 10 donor cells can establish one ntES cell line and, once established, these cells will propagate indefinitely. These cells can be used to generate cloned animals from ntES cell lines using a second round of NT. Even in infertile and "unclonable" strains of mice, we can generate offspring from somatic cells by combining cloning with ntES technology. Moreover, cloned offspring can be generated potentially even from the nuclei of dead bodies or freeze-dried cells via ntES cells, such as from an extinct frozen animal. Currently, only the ntES technology is available for this purpose, because all other techniques, including iPS cell derivation, require significant numbers of living donor cells. This review describes how to improve the efficiency of cloning, the establishment of clone-derived embryonic stem cells and further applications.

Knowledge Transfer and Leadership Development in Coordination with Young Generation in Nuclear (YGN) Societies

International Nuclear Information System (INIS)

Batra, Chirayu; Janin, Denis

2017-01-01

IYNC in a Nutshell: The mission - IYNC (International Youth Nuclear Congress) is the global network of a new generation of nuclear professionals to: •Communicate the benefits of nuclear science and applications •Promote the peaceful use of nuclear power •Provide a platform for networking •Facilitate knowledge transfer between generations and across boundaries; The structure - IYNC is a non-profit organization run by: •11 Officers •Board of Directors •50 National Representatives (e.g. YGN) •20 Members at Large •Dedicated committees and team for projects (30+) → more than 80 volunteers; The activities - •Biannual Congress (IYNCWiN18) •Grants Committee •YGN Startup & Support •Bulletin, Newsletter – sign up www.iync.org •Innovation4Nuclear (I4N) •Nuclear4Climate •Annual Board of Directors. YGN (Young Generation Network): What is a YGN? • A group of young professionals and students interested in nuclear science and technology; Benefits: •Knowledge transfer •Train the future international leaders •Networking •Attracts, develops and retains young professionals

Technology transfer in the CNEA: Between 'supply-slide' and nuclear plan

International Nuclear Information System (INIS)

Enriquez, Santiago N

2012-01-01

This paper reflects on linkage activities and technology transfer of Atomic Energy National Commission (CNEA). Given that the CNEA was a S and T institution, which was pioneer in activities to reach out the productive sector; it will show that, since 1961, the year of the creation of the Service of Technical Assistance to Industry (SATI) -; until today -where the Law 23.877 of Promotion of the Technological Innovation is fully implemented, different modes of technology transfer based on certain S and T policies are detected. First, it will describe the characteristics of the technology transfer made by SATI, and its connection with the political decisions made by the Department of Metallurgy of CNEA to relate the domestic industry and the Nuclear Plan. In a second instance, it will describe the effects on the technology transfer after the disabling of the Nuclear Plan in 1994, the enforcement of Law 23,877 in CNEA and progressive deactivation of SATI. Finally, it will reflect on the two main stages of technology transfer in CNEA for potential S and T policies (author)

Several problems and their countermeasures of recent developments in nuclear techniques in China

International Nuclear Information System (INIS)

Xia Yuanfu

1993-01-01

The nuclear technique that is developing at top speed in China is introduced. Several characteristics of recent international developments in nuclear techniques are discussed and a precise classification is suggested. Particularly the present problems and their countermeasures of recent developments in nuclear techniques in China are explored

Development capacity of pre- and postpubertal pig oocytes evaluated by somatic cell nuclear transfer and parthenogenetic activation

DEFF Research Database (Denmark)

Skovsgaard, Hanne; Li, Rong; Liu, Ying

2013-01-01

Most of the porcine oocytes used for in vitro studies are collected from gilts. Our aims were to study development capacity of gilt v. sow oocytes (pre- and postpubertal respectively) using 2 techniques illustrating development competence [parthenogenetic activation (PA) and somatic cell nuclear...... transfer (SCNT)], and to describe a simple method to select the most competent oocytes. Inside-ZP diameter of in vitro-matured gilt oocytes was measured (µm; small ≤110; medium >110; large ≥120). Gilt and sow oocytes were morphologically grouped as good (even cytoplasm, smooth cell membrane, visible...

Nuclear techniques of analysis in diamond synthesis and annealing

Energy Technology Data Exchange (ETDEWEB)

Jamieson, D. N.; Prawer, S.; Gonon, P.; Walker, R.; Dooley, S.; Bettiol, A.; Pearce, J. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1996-12-31

Nuclear techniques of analysis have played an important role in the study of synthetic and laser annealed diamond. These measurements have mainly used ion beam analysis with a focused MeV ion beam in a nuclear microprobe system. A variety of techniques have been employed. One of the most important is nuclear elastic scattering, sometimes called non-Rutherford scattering, which has been used to accurately characterise diamond films for thickness and composition. This is possible by the use of a database of measured scattering cross sections. Recently, this work has been extended and nuclear elastic scattering cross sections for both natural boron isotopes have been measured. For radiation damaged diamond, a focused laser annealing scheme has been developed which produces near complete regrowth of MeV phosphorus implanted diamonds. In the laser annealed regions, proton induced x-ray emission has been used to show that 50 % of the P atoms occupy lattice sites. This opens the way to produce n-type diamond for microelectronic device applications. All these analytical applications utilize a focused MeV microbeam which is ideally suited for diamond analysis. This presentation reviews these applications, as well as the technology of nuclear techniques of analysis for diamond with a focused beam. 9 refs., 6 figs.

Nuclear techniques of analysis in diamond synthesis and annealing

Energy Technology Data Exchange (ETDEWEB)

Jamieson, D N; Prawer, S; Gonon, P; Walker, R; Dooley, S; Bettiol, A; Pearce, J [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1997-12-31

Nuclear techniques of analysis have played an important role in the study of synthetic and laser annealed diamond. These measurements have mainly used ion beam analysis with a focused MeV ion beam in a nuclear microprobe system. A variety of techniques have been employed. One of the most important is nuclear elastic scattering, sometimes called non-Rutherford scattering, which has been used to accurately characterise diamond films for thickness and composition. This is possible by the use of a database of measured scattering cross sections. Recently, this work has been extended and nuclear elastic scattering cross sections for both natural boron isotopes have been measured. For radiation damaged diamond, a focused laser annealing scheme has been developed which produces near complete regrowth of MeV phosphorus implanted diamonds. In the laser annealed regions, proton induced x-ray emission has been used to show that 50 % of the P atoms occupy lattice sites. This opens the way to produce n-type diamond for microelectronic device applications. All these analytical applications utilize a focused MeV microbeam which is ideally suited for diamond analysis. This presentation reviews these applications, as well as the technology of nuclear techniques of analysis for diamond with a focused beam. 9 refs., 6 figs.

Nuclear techniques of analysis in diamond synthesis and annealing

International Nuclear Information System (INIS)

Jamieson, D. N.; Prawer, S.; Gonon, P.; Walker, R.; Dooley, S.; Bettiol, A.; Pearce, J.

1996-01-01

Nuclear techniques of analysis have played an important role in the study of synthetic and laser annealed diamond. These measurements have mainly used ion beam analysis with a focused MeV ion beam in a nuclear microprobe system. A variety of techniques have been employed. One of the most important is nuclear elastic scattering, sometimes called non-Rutherford scattering, which has been used to accurately characterise diamond films for thickness and composition. This is possible by the use of a database of measured scattering cross sections. Recently, this work has been extended and nuclear elastic scattering cross sections for both natural boron isotopes have been measured. For radiation damaged diamond, a focused laser annealing scheme has been developed which produces near complete regrowth of MeV phosphorus implanted diamonds. In the laser annealed regions, proton induced x-ray emission has been used to show that 50 % of the P atoms occupy lattice sites. This opens the way to produce n-type diamond for microelectronic device applications. All these analytical applications utilize a focused MeV microbeam which is ideally suited for diamond analysis. This presentation reviews these applications, as well as the technology of nuclear techniques of analysis for diamond with a focused beam. 9 refs., 6 figs

Toshiba's developments on construction techniques of nuclear power plants

International Nuclear Information System (INIS)

Hayashi, Y.; Itoh, N.

1987-01-01

Reliable and economic energy supplies are fundamental requirements of energy policies in Japan. To accomplish these needs, nuclear power plants are being increased in Japan. In recent years, construction cost increases and schedule extensions have affected the capital cost of nuclear energy, compared with fossil power plants, due to lower costs of oil and coal. On the other hand, several severe regulations have been applied to nuclear power plant designs. High-quality and cooperative engineering and harmonized design of equipment and parts are strongly required. Therefore, reduced construction costs and scheduling, as well as higher quality and reliability, are the most important items for nuclear industry. Toshiba has developed new construction techniques, as well as design and engineering tools for control and management, that demonstrate the positive results achieved in the shorter construction period of 1100-MW(electric) nuclear power plants. The normal construction period so far is 64 months, whereas the current construction period is 52 months. (New construction techniques are partially applied). In future years, the construction period will be lowered to 48 months. (New construction techniques are fully applied). A construction period is defined as time from the start of rock inspection to the start of commercial operation

Techniques used for charged particle nuclear data evaluation at CNDC

International Nuclear Information System (INIS)

Zhuang Youxiang; Sun Zuxun

1993-01-01

The methods and techniques used for Charged Particle Nuclear Data (CPND) evaluation at Chinese Nuclear Data Center (CNDC) are summarized, including compilation and evaluation of experimental data, nuclear reaction theory and model calculation, systematics research and comprehensive recommendation etc

Handmade cloning: the future way of nuclear tranfer?

DEFF Research Database (Denmark)

Vajta, Gabor

2007-01-01

The topic of this review is an alternative technique for somatic cell nuclear transfer. Removal of the zona pellucida facilitates manipulations of mammalian oocytes and early embryos, and problems related to their subsequent culture are commonly overestimated. This approach enables radical...... modifications to somatic cell nuclear transfer, and the   handmade cloning (HMC) technique is now successfully applied to an increasing numbers of species. HMC radically decreases costs and the need for a skilled workforce; furthermore, it increases productivity, enables cryopreservation, and results in birth...

Nuclear techniques in animal agriculture

International Nuclear Information System (INIS)

Young, B.A.

1981-01-01

Nuclear technology plays an integral part in research to improve the health and productivity of animals. The use of radioisotopes and ionizing radiations in animal agriculture is briefly reviewed. The radioimmunoassay techniques give the opportunity of measuring and following precisely hormonal patterns in animals over the reproductive cycle. Simply by analysing a sample of blood, milk, or other body fluid, minute hormone concentrations can be assayed and the reproductive status of the animal assessed. The radioimmunoassay procedure uses antigens which are isotopically labelled, usually with 125 I, and antibodies specifically developed for each hormone. The onset of sexual maturity, of oestrus, or the influence of environmental, nutritional or other factors on the reproductive state of an animal can be studied. An example of the use of the radioimmunoassay technique is illustrated in the coordinated research program of the IAEA which focuses on improving domestic buffalo production. Nuclear techniques, particularly the use of stable and radioactive tracers are providing important insights into the functioning of the digestive system of ruminants, its qualitative dynamics and metabolism. For assessing the products of the rumen, particularly volatile fatty acids which become an energy source, and microbial proteins which become a protein source for the animal, materials labelled with 14 C, 3 H, 35 S, 15 N and 32 P are used. As an illustrative example, the results of one study of nitrogen metabolism, microbial protein and rumen bypass protein synthesis in cattle are shown

Applications of nuclear techniques and research 1990

International Nuclear Information System (INIS)

1990-01-01

The application of nuclear techniques, i.e. those techniques where use is made of isotopes and radiation, continues to contribute to progress in science, technology, agriculture, industry and medicine. Nuclear applications found their way into the IAEA's activities from the very beginning, and their promotion constitutes today a substantial fraction of the IAEA's Technical Co-operation and Research Contract Programmes. The 1990 selection is opened by a review of the role and function of the IAEA's Research Contract Programme, which is one of the Agency's most effective tools for promoting and developing nuclear applications. Applications in agriculture are covered in two articles dealing respectively with issues affecting the acceptance of food irradiation by governments, the food industry and consumers and with the use of radiation to induce plant mutation, a practical tool available to plant breeders in their effort to develop better quality crops. The following article deals with a typical nuclear application in medicine, i.e. the use of radionuclides in the diagnosis of lung diseases and in investigations related to the respiratory function. The use of environmental isotopes to assess the energy potential of geothermal fields is the next subject, a good example of nuclear methods applied to the evaluation of natural resources. The 1990 review concludes with a presentation prepared by the Third World Academy of Sciences on magnetic fusion research activity in the developing countries and its connection with the IAEA's own fusion programme

Nuclear techniques for bulk and surface analysis of materials

International Nuclear Information System (INIS)

D'Agostino, M.D.; Kamykowski, E.A.; Kuehne, F.J.; Padawer, G.M.; Schneid, E.J.; Schulte, R.L.; Stauber, M.C.; Swanson, F.R.

1978-01-01

A review is presented summarizing several nondestructive bulk and surface analysis nuclear techniques developed in the Grumman Research Laboratories. Bulk analysis techniques include 14-MeV-neutron activation analysis and accelerator-based neutron radiography. The surface analysis techniques include resonant and non-resonant nuclear microprobes for the depth profile analysis of light elements (H, He, Li, Be, C, N, O and F) in the surface of materials. Emphasis is placed on the description and discussion of the unique nuclear microprobe analytical capacibilities of immediate importance to a number of current problems facing materials specialists. The resolution and contrast of neutron radiography was illustrated with an operating heat pipe system. The figure shows that the neutron radiograph has a resolution of better than 0.04 cm with sufficient contrast to indicate Freon 21 on the inner capillaries of the heat pipe and pooling of the liquid at the bottom. (T.G.)

Proceedings of firsts workshop on Nuclear and related techniques in health

International Nuclear Information System (INIS)

1997-01-01

The book presents papers submitted to the first Workshop on Nuclear and related techniques in health that was holder at the first International Symposium on Nuclear and Related Techniques in Agriculture, held in Havana, Cuba, on October 28 th and 30 th, 1997

Nuclear reactor power for an electrically powered orbital transfer vehicle

Science.gov (United States)

Jaffe, L.; Beatty, R.; Bhandari, P.; Chow, E.; Deininger, W.; Ewell, R.; Fujita, T.; Grossman, M.; Kia, T.; Nesmith, B.

1987-01-01

To help determine the systems requirements for a 300-kWe space nuclear reactor power system, a mission and spacecraft have been examined which utilize electric propulsion and this nuclear reactor power for multiple transfers of cargo between low earth orbit (LEO) and geosynchronous earth orbit (GEO). A propulsion system employing ion thrusters and xenon propellant was selected. Propellant and thrusters are replaced after each sortie to GEO. The mass of the Orbital Transfer Vehicle (OTV), empty and dry, is 11,000 kg; nominal propellant load is 5000 kg. The OTV operates between a circular orbit at 925 km altitude, 28.5 deg inclination, and GEO. Cargo is brought to the OTV by Shuttle and an Orbital Maneuvering Vehicle (OMV); the OTV then takes it to GEO. The OTV can also bring cargo back from GEO, for transfer by OMV to the Shuttle. OTV propellant is resupplied and the ion thrusters are replaced by the OMV before each trip to GEO. At the end of mission life, the OTV's electric propulsion is used to place it in a heliocentric orbit so that the reactor will not return to earth. The nominal cargo capability to GEO is 6000 kg with a transit time of 120 days; 1350 kg can be transferred in 90 days, and 14,300 kg in 240 days. These capabilities can be considerably increased by using separate Shuttle launches to bring up propellant and cargo, or by changing to mercury propellant.

Nuclear reactor power for an electrically powered orbital transfer vehicle

International Nuclear Information System (INIS)

Jaffe, L.; Beatty, R.; Bhandari, P.

1987-01-01

To help determine the systems requirements for a 300-kWe space nuclear reactor power system, a mission and spacecraft have been examined which utilize electric propulsion and this nuclear reactor power for multiple transfers of cargo between low Earth orbit (LEO) and geosynchronous Earth orbit (GEO). A propulsion system employing ion thrusters and xenon propellant was selected. Propellant and thrusters are replaced after each sortie to GEO. The mass of the Orbital Transfer Vehicle (OTV), empty and dry, is 11,000 kg; nominal propellant load is 5000 kg. The OTV operates between a circular orbit at 925 km altitude, 28.5 deg inclination, and GEO. Cargo is brought to the OTV by Shuttle and an Orbital Maneuvering Vehicle (OMV); the OTV then takes it to GEO. The OTV can also bring cargo back from GEO, for transfer by OMV to the Shuttle. OTV propellant is resupplied and the ion thrusters are replaced by the OMV before each trip to GEO. At the end of mission life, the OTV's electric propulsion is used to place it in a heliocentric orbit so that the reactor will not return to Earth. The nominal cargo capability to GEO is 6000 kg with a transit time of 120 days; 1350 kg can be transferred in 90 days, and 14,300 kg in 240 days. These capabilities can be considerably increased by using separate Shuttle launches to bring up propellant and cargo, or by changing to mercury propellant

The main achievements of the 'Systematic approach for nuclear knowledge transfer and preservation in Romania' project

International Nuclear Information System (INIS)

Balaceanu, V.; Constantin, M.; Apostol, M.

2009-01-01

The objective of this paper is to highlight the main results of the Contract No. 13971/RO which was performed in the frame of the IAEA Coordinated Research Program (CRP) on 'Comparative Analysis of Methods and Tools for Nuclear Knowledge Preservation'. The title of the Romanian project was 'Systematic approach for Nuclear Knowledge Transfer and Preservation in Romania'. The partners which were involved in this Program: Bulgaria (Kozloduy NPP and Technical University of Sofia), Canada (Chalk River Laboratories, AECL), Jordan (Water Authority of Jordan), the Philippines (Philippines Nuclear Research Institute), Romania (Institute for Nuclear Research), the Russian Federation (Inter DCM. Corp., a subsidiary of RRC Kurchatov Institute) and the European Commission (Institute of Energy, DG Joint Research). Among the main results obtained in this work we must specify the development of an INR short/medium strategy concerning the professional knowledge management, based on an assessment of the status of the knowledge transfer and preservation. This documentation was made using some adequate tools like a specific questionnaire for highlighting the experts' motivation for transferring their knowledge and an appropriate method for the knowledge loss risk assessment. Therewith, we mention our participation in the developing of an IAEA TEC-DOC concerning the problem of nuclear knowledge transfer and preservation. (authors)

Polarization transfer from polarized nuclear spin to μ- spin in muonic atom

International Nuclear Information System (INIS)

Kuno, Yoshitaka; Nagamine, Kanetada; Yamazaki, Toshimitsu.

1987-02-01

A theoretical study of polarization transfer from an initially-polarized nuclear spin to a μ - spin in a muonic atom is given. The switching of the hyperfine interaction at excited muonic states as well as at the ground 1s state is taken into account. The upper state of hyperfine doublet at the muonic 1s state is considered to proceed down to the lower state. It is found that as the hyperfine interaction becomes effective at higher excited muonic orbitals, a less extent of polarization is transferred from the nuclear spin to the μ - spin. The theoretical values obtained are compared with the recent experiment of μ - repolarization in a polarized 209 Bi target. (author)

Improving animal productivity by nuclear techniques

International Nuclear Information System (INIS)

Garcia, M.; Jayasuriya, M.C.N.; Perera, B.M.A.O.

1995-01-01

The IAEA and FAO have run a joint programme for 30 years to assist national agricultural research systems in member states to develop, test and apply nuclear and related techniques for improving the productivity of livestock. Applications of nuclear technologies for improving livestock productivity include: use of radioimmunoassay in animal nutrition researches, animal production, and evaluating feeding and management systems through reproductive performance in a field. Geographic coverage and the type of livestock studies are: grazing animals (cattle, goats and sheep) in Africa, Latin America and Asia, as well as buffalo production in Asia. 6 refs, 8 figs, 6 tabs

Romanian knowledge transfer network in nuclear physics and engineering - REFIN

International Nuclear Information System (INIS)

Ghitescu, Petre; Prisecaru, Ilie

2007-01-01

According to the requirements of the Romanian Nuclear Programme regarding the education and training of the skilled personnel for the nuclear facilities, a knowledge transfer network named REFIN (in Romanian: Retea Educationala in Fizica si Ingineria Nucleara) was developed since 2005. The knowledge target field is nuclear physics and engineering. The main objective of this network is to develop an effective, flexible and modern educational system in the nuclear physics and engineering area which could meet the requirements of all known types of nuclear facilities and therewith be redundant with the perspectives of the European Research Area (FP7, EURATOM). A global strategy was proposed in order to harmonize the curricula between the network facilities to implement pilot modern teaching programs (courses/modules), to introduce advanced learning methods (as Systematic Approach to Training, e-learning and distance-learning), to strengthen and better use the existing research infrastructures of the research institutes in network. The education and training strategy is divided into several topics: university engineering , master, post-graduate, Ph.D. degree, post-doctoral activity, training for industry, improvement. For the first time in our country, a modular scheme is used allowing staff with different technical background to participate at different levels. In this respect, the European system with transferable credits (ECTS) is used. Based on this strategy, courses in 'Radioactive Waste Management' and 'Numerical and Experimental Methods in Reactor Physics' for both MS students and for industry. This way the training activity which a student attends will allow him or her to be involved, depending on specific professional needs, into a flexible educational scheme. This scheme will ensure competence and enhancement and also the possibility of qualification development and a better mobility on labour market. This kind of activity is already in progress in the

Characterizing convective heat transfer using infrared thermography and the heated-thin-foil technique

International Nuclear Information System (INIS)

Stafford, Jason; Walsh, Ed; Egan, Vanessa

2009-01-01

Convective heat transfer, due to axial flow fans impinging air onto a heated flat plate, is investigated with infrared thermography to assess the heated-thin-foil technique commonly used to quantify two-dimensional heat transfer performance. Flow conditions generating complex thermal profiles have been considered in the analysis to account for dominant sources of error in the technique. Uncertainties were obtained in the measured variables and the influences on the resultant heat transfer data are outlined. Correction methods to accurately account for secondary heat transfer mechanisms were developed and results show that as convective heat transfer coefficients and length scales decrease, the importance of accounting for errors increases. Combined with flow patterns that produce large temperature gradients, the influence of heat flow within the foil on the resultant heat transfer becomes significant. Substantial errors in the heat transfer coefficient are apparent by neglecting corrections to the measured data for the cases examined. Methods to account for these errors are presented here, and demonstrated to result in an accurate measurement of the local heat transfer map on the surface

Studies of heat transfer having relevance to nuclear reactor containment cooling by buoyancy-driven air flow

Energy Technology Data Exchange (ETDEWEB)

Jackson, J. D.; Li, J.; Wang, J. [The Univ., of Manchester, Manchester (United Kingdom)

2003-07-01

Two separate effects experiments concerned with buoyancy-influenced convective heat transfer in vertical passages which have relevance to the problem of nuclear reactor containment cooling by means of buoyancy-driven airflow are described. A feature of each is that local values of heat transfer coefficient are determined on surfaces maintained at uniform temperature. Experimental results are presented which highlight the need for buoyancy-induced impairment of turbulent convective heat transfer to be accounted for in the design of such passive cooling systems. A strategy is presented for predicting the heat removal by combined convective and radiative heat transfer from a full scale nuclear reactor containment shell using such experimental results.

The project of Esfahan Nuclear Technology Center (ENTEC) and the transfer of nuclear tecnology in Iran

International Nuclear Information System (INIS)

Khazaneh, Reza

1977-01-01

In 1974, the Atomic Energy Organization of Iran (AEOI) decided to set up a Nuclear Technology Center on Esfahan (ENTEC) in collaboration with France's Technicatome Company and the CEA. This center is scheduled to go into operation during 1976-1980. The purposes for setting up ENTEC are threefold: a. to give scientific and technical support to the operation of nuclear power plants and nuclear industries in Iran. b. to carry out research and development in the area of nuclear technology on an industrial level. c. to give supplementary education and training to the manpower needs for the AEOI. To carry out the program of technology transfer, temporary laboratories have been set up in Tehran for engineers, technicians and training programs have been organized primarily in France. The ENTEC project will also include a school for education of junior scientists and engineers in the field of nuclear technology

Comparison of encryption techniques between chaos theory and password for wireless power transfer system: A review

Science.gov (United States)

Hussin, N. H.; Azizan, M. M.; Ali, A.; Albreem, M. A. M.

2017-09-01

This paper reviews the techniques used in Wireless power transfer (WPT). WPT is one of the most useful ways to transfer power. Based on power transfer distances, the WPT system can be divided into three categories, namely, near, medium, and far fields. Inductive coupling and capacitive coupling contactless techniques are used in the near-field WPT. Magnetic resonant coupling technique is used in the medium-field WPT. Electromagnetic radiation is used in the far-field WPT. In addition, energy encryption plays a major role in ensuring that power is transferred to the true receiver. Therefore, this paper reviews the energy encryption techniques in WPT system. A comparison between different technique shows that the distance, efficiency, and number of receivers are the main factors in selecting the suitable energy encryption technique.

Theory of nuclear heavy-ion direct transfer reactions

International Nuclear Information System (INIS)

Crowley, B.J.B.

1979-01-01

We review the distorted-wave approach to direct transfer reactions and draw attention to some of the shortcomings of current theories. We show that a reformulated form of the distorted-wave Born approximation (DWBA) for transfer can lead to important simplifications of the theory, which are valid for nuclear heavy-ion induced reactions at energies > or approx. =MeV/nucleon. In particular, in the semiclassical limit, it leads to a new and simple formula for the transfer t-matrix which includes all the essential physics while offering several important advantages over standard ''full-recoil finite-range'' DWBA. One such advantage is that the new formula is more transparent in that it is amendable to interpretation and analytical manipulation. At high-energy it is shown to reduce to one earlier deduced using eikonal-DWBA. The conditions for the validity of the new theory are discussed in detail. They are shown to be generally well satisfied for small-mass transfer between heavy-ions at energies at or above those particularly favour transfer (> or approx. =10 MeV/nucleon for transfer of valence nucleons). The restriction to small mass is not due to any recoil approximation; in fact, it is only a necessary restriction at certain energies. The theory treats recoil exactly. Consideration of the optimum dynamical conditions for transfer leads to a set of matching conditions. The presence of hitherto neglected absorption, arising from dynamical effects of poor matching, it suggested and qualitatively discussed. Condition under which such absorption may be neglected are derived. Results of numerical calculations are presented showing that the theory is capable of good agreement with standard full-recoil finite-range DWBA, and that it is capable of giving at least as good an account of experimental data for nucleon-transfer between heavy-ions at energies approx.10 MeV/nucleon

Development of indigenous technology at CNEN in the fields of nuclear medicine, nuclear detectors, instrumentation, radioisotope production and application of nuclear techniques

International Nuclear Information System (INIS)

Mafra, O.

1990-01-01

The main objectives of the program developed at CNEN in the field of nuclear medicine, nuclear detectors, instrumentation, radioisotope production and application of nuclear technique are described. (E.G.) [pt

Successful cloning of coyotes through interspecies somatic cell nuclear transfer using domestic dog oocytes.

Science.gov (United States)

Hwang, Insung; Jeong, Yeon Woo; Kim, Joung Joo; Lee, Hyo Jeong; Kang, Mina; Park, Kang Bae; Park, Jung Hwan; Kim, Yeun Wook; Kim, Woo Tae; Shin, Taeyoung; Hyun, Sang Hwan; Jeung, Eui-Bae; Hwang, Woo Suk

2013-01-01

Interspecies somatic cell nuclear transfer (iSCNT) is an emerging assisted reproductive technology (ART) for preserving Nature's diversity. The scarcity of oocytes from some species makes utilisation of readily available oocytes inevitable. In the present study, we describe the successful cloning of coyotes (Canis latrans) through iSCNT using oocytes from domestic dogs (Canis lupus familiaris or dingo). Transfer of 320 interspecies-reconstructed embryos into 22 domestic dog recipients resulted in six pregnancies, from which eight viable offspring were delivered. Fusion rate and cloning efficiency during iSCNT cloning of coyotes were not significantly different from those observed during intraspecies cloning of domestic dogs. Using neonatal fibroblasts as donor cells significantly improved the cloning efficiency compared with cloning using adult fibroblast donor cells (Pcloning of coyotes in the present study holds promise for cloning other endangered species in the Canidae family using similar techniques. However, there are still limitations of the iSCNT technology, as demonstrated by births of morphologically abnormal coyotes and the clones' inheritance of maternal domestic dog mitochondrial DNA.

On-line Monitoring and Calibration Techniques in Nuclear Power Plants

International Nuclear Information System (INIS)

Hashemian, H.M.

2011-01-01

Years of research, testing and experience in the field of sensor diagnostics have yielded many technologies which offer financial as well as operational benefits to the nuclear industry. Among these technologies are On-Line Monitoring (OLM) and On-Line Calibration of critical process monitoring sensors such as resistance temperature detectors (RTD), thermocouples, and pressure transmitters to name a few. The remote access and verification of these sensors have been shown to limit the exposure of maintenance personnel to harsh environments while at the same time effectively and efficiently diagnosing the health and performance of these sensors. In addition to sensors, technologies exist in determining not only the health of instrumentation and control (I and C) cabling that carries the signals from these sensors, but also these same cable testing techniques can be used in the remote evaluation of many end devices used in safety related operations as well. Given these advances in sensor system monitoring techniques it would seem to follow that nuclear utilities from around the world would be applying these tried and true techniques to optimize up time and to provide additional confidence in the output of processing sensors. However, although several of the world's regulatory bodies have approved of the concept of these techniques, few utilities have undertaken to fully embrace on-line monitoring and on-line calibration of nuclear process sensors. In the United States efforts are now underway, with representatives of the U.S. nuclear industry and nuclear power plant vendors to obtain generic NRC licensing for the use of OLM in nuclear power plants. If approved, generic licensing will help pave the way toward greater implementation of OLM and its related calibration techniques. (author)

Gravity-driven flow and heat transfer in a spent nuclear fuel storage pool

International Nuclear Information System (INIS)

Gay, R.R.

1983-01-01

The GFLOW code analyzes a three-dimensional rectangular porous medium by dividing the porous medium into a number of nodes or cells specified by the user. The finite difference form of the fluid conservation equations is solved for each node by application of a modified ''marker and cell'' numerical technique. The existence of spent nuclear fuel in any node is modeled by using a porosity value less than unity in that node and by including a surface heat transfer term in the fluid energy equation. In addition, local pressure losses due to grid spaces or other planar flow obstructions can be modeled by local loss coefficients. Heat conduction in the fuel is simulated by a fast running implicit finite difference model of the fuel, gap, and clad regions of the fuel rod

Industrial applications of radioisotopes: techniques and procedures of (NTIS) Nuclear Techniques Industrial Service

International Nuclear Information System (INIS)

Smith, S.W.; Kruger, J.

1985-06-01

Radioisotope handling procedures followed by personnel of the Nuclear Techniques Industrial Service (NTIS) during the conduction of investigations in industry are described. Possible radiological implications as a result of the various measuring techniques and different types of plants are discussed. Conditions under which permanent authorization has been granted for the use of radioisotopes are mentioned

Conference on Techniques of Nuclear and Conventional Analysis and Applications

International Nuclear Information System (INIS)

2012-01-01

Full text : With their wide scope, particularly in the areas of environment, geology, mining, industry and life sciences; analysis techniques are of great importance in research as fundamental and applied. The Conference on Techniques for Nuclear and Conventional Analysis and Applications (TANCA) are Registered in the national strategy of opening of the University and national research centers on their local, national and international levels. This conference aims to: Promoting nuclear and conventional analytical techniques; Contribute to the creation of synergy between the different players involved in these techniques include, Universities, Research Organizations, Regulatory Authorities, Economic Operators, NGOs and others; Inform and educate potential users of the performance of these techniques; Strengthen exchanges and links between researchers, industry and policy makers; Implement a program of inter-laboratory comparison between Moroccan one hand, and their foreign counterparts on the other; Contribute to the research training of doctoral students and postdoctoral scholars. Given the relevance and importance of the issues related to environment and impact on cultural heritage, this fourth edition of TANCA is devoted to the application of analytical techniques for conventional and nuclear Questions ied to environment and its impact on cultural heritage.

Transferring nuclear power technology to foster Chinese self-reliance

International Nuclear Information System (INIS)

Levi, J-D.

1998-01-01

Being convinced that nuclear energy will play an important role in meeting its huge future energy demands, China considers that the development of a very strong national nuclear industry capable of covering all aspects of a major national power program is of paramount importance.In this context, China has invited its foreign partners to propose contributions to the studies for this development, in view of establishing a suitable cooperation program with the entire Chinese nuclear power industry, including design institutes, equipment manufacturers, construction companies and plant operators.One of the main objectives defined by the Chinese authorities for the further development of their nuclear industry with some international cooperation is the achievement of a very high level of self-reliance by Chinese industry in all of the following areas: project management, design and engineering, construction, equipment design and manufacturing,operation and maintenance. The major key to reaching this target of overall and long term self reliance lies in the implementation of thorough design know how transfer towards all partners of the Chinese nuclear industry, who shall acquire the necessary capabilities so as to completely master nuclear engineering. While this policy might entail fairly high front end investments by the technology receivers, in terms of industrial infrastructure nad engineering capabilities it is expected to pay off over the long term with the development of a substantial nuclear power plant construction program.(DM)

Nuclear techniques used in soil fertility and plant nutrition

International Nuclear Information System (INIS)

Halitligil, M.B.; Kislal, H.; Sirin, H.; Sirin, C.; Kilicaslan, A.

2004-01-01

Full text: Nuclear techniques, which include the usage of radioactive and stable isotopes, had been used in soil fertility, plant nutrition, plant breeding, plant protection and food preservation research works after 1950s. Ultimately these nuclear techniques contributed greatly in increased plant production. In general, it is possible to separate the nuclear techniques used in soil fertility and plant nutrition into two groups. The first group is the use of radioactive and stable isotopes as a tracer in order to find out the optimum fertilization rate of plants precisely. The second group is the use of neutron probe in determining the soil moisture at different periods of the growing season and at various soil depths precisely without any difficulty. In research works where conventional techniques are used, it is not possible to identify how much of the nutrient taken up by the plant came from applied fertilizer or soil. However, when tracer techniques are used in research works it is possible to identify precisely which amount of the nutrient taken from fertilizer or from soil. Therefore, the nuclear techniques are very important in finding out which variety of fertilizer and how much of it must be used. The determination of the soil moisture is very important in finding the water needs of the plants for a good growth. Soil moisture contents changes often during the growth period, so it must be determined very frequently in order to determine the amount of irrigation that has to be done. Conventional soil moisture determination (gravimetric method) is very laborious especially when it has to be done frequently. However, by using neutron probe soil moisture determinations can be done very easily any time during the plant growth period

Nuclear techniques used in soil fertility and plant nutrition

International Nuclear Information System (INIS)

Halitligil, M.B.

2004-01-01

Nuclear techniques, which include the usage of radioactive and stable isotopes, had been used in soil fertility, plant nutrition, plant breeding, plant protection and food preservation research works after 1950s. Ultimately these nuclear techniques contributed greatly in increased plant production. In general, it is possible to separate the nuclear techniques used in soil fertility and plant nutrition into two groups. The first group is the use of radioactive and stable isotopes as a tracer in order to find out the optimum fertilization rate of plants precisely. The second group is the use of neutron probe in determining the soil moisture at different periods of the growing season and at various soil depths precisely without any difficulty. In research works where conventional techniques are used, it is not possible to identify how much of the nutrient taken up by the plant came from applied fertilizer or soil. However, when tracer techniques are used in research works it is possible to identify precisely which amount of the nutrient taken from fertilizer or from soil. Therefore, the nuclear techniques are very important in finding out which variety of fertilizer and how much of it must be used. The determination of the soil moisture is very important in finding the water needs of the plants for a good growth. Soil moisture contents changes often during the growth period, so it must be determined very frequently in order to determine the amount of irrigation that has to be done. Conventional soil moisture determination (gravimetric method) is very laborious especially when it has to be done frequently. However, by using neutron probe soil moisture determinations can be done very easily any time during the plant growth period. (author)

Robust control technique for nuclear power plants

International Nuclear Information System (INIS)

Murphy, G.V.; Bailey, J.M.

1989-03-01

This report summarizes the linear quadratic Guassian (LQG) design technique with loop transfer recovery (LQG/LTR) for design of control systems. The concepts of return ratio, return difference, inverse return difference, and singular values are summarized. The LQG/LTR design technique allows the synthesis of a robust control system. To illustrate the LQG/LTR technique, a linearized model of a simple process has been chosen. The process has three state variables, one input, and one output. Three control system design methods are compared: LQG, LQG/LTR, and a proportional plus integral controller (PI). 7 refs., 20 figs., 6 tabs

Characterization of Indian cigarette tobacco and its smoke aerosol by nuclear and allied techniques

International Nuclear Information System (INIS)

Shaikh, A.N.; Negi, B.S.; Sadasivan, S.

2002-01-01

Forty brands of tobacco used in Indian cigarettes, 20 brands of bidis (tobacco rolled in wrapper leaves), 15 brands of chewing tobacco and 15 brands of snuff tobacco were analyzed by nuclear and allied techniques. The elements measured into tobacco can be grouped into seven categories from less than 1 ppm to 5% by weight. Concentration level varied from 0.5-5% for (Ca, K, Cl), 400-1500 ppm (Fe), 200-600 ppm (Na), 100-300 ppm (Ti, Mn, Br and Sr), 10-100 ppm (Cu, Zn and Rb), 1-10 ppm (Cr, Ni, Pb and La) and less than 1 ppm (As, Co, Cd, Sb, Hg and Eu). Among the above elements Cr, Ni, As, Cd, Pb, Hg and Sb are considered toxic. The percentage transfer of the elements from cigarette tobacco to smoke particles during smoking was also estimated using a smoking machine and collecting the smoke particles on a filter paper. The results show that Br, Cr, Sb and Zn have high percentage transfer from tobacco to its smoke of the order of 2-15%. Out of these Sb has the highest 15%. Cobalt, Fe and Sc have lowest percentage of transfer of the order of less than 1%. The percent transfer of these elements from tobacco to tobacco smoke is higher in case of bidis (1.5-3.0 times) as compared to cigarettes. In cigarettes also non-filter cigarettes have higher transfer (2-3 times) as compared to filter tip cigarettes. (author)

DOT1L inhibitor improves early development of porcine somatic cell nuclear transfer embryos

DEFF Research Database (Denmark)

Tao, Jia; Zhang, Yu; Zuo, Xiaoyuan

2017-01-01

Incomplete epigenetic reprogramming of the genome of donor cells causes poor early and full-term developmental efficiency of somatic cell nuclear transfer (SCNT) embryos. Previous research indicate that inhibition of the histone H3 K79 methyltransferase DOT1L, using a selective pharmacological...... inhibitor EPZ004777 (EPZ), significantly improved reprogramming efficiency during the generation of mouse induced pluripotent stem cells. However, the roles of DOT1L in porcine nuclear transfer-mediated cellular reprogramming are not yet known. Here we showed that DOT1L inhibition via 0.5 nM EPZ treatment...

Sublimation-assisted graphene transfer technique based on small polyaromatic hydrocarbons

Science.gov (United States)

Chen, Mingguang; Stekovic, Dejan; Li, Wangxiang; Arkook, Bassim; Haddon, Robert C.; Bekyarova, Elena

2017-06-01

Advances in the chemical vapor deposition (CVD) growth of graphene have made this material a very attractive candidate for a number of applications including transparent conductors, electronics, optoeletronics, biomedical devices and energy storage. The CVD method requires transfer of graphene on a desired substrate and this is most commonly accomplished with polymers. The removal of polymer carriers is achieved with organic solvents or thermal treatment which makes this approach inappropriate for application to plastic thin films such as polyethylene terephthalate substrates. An ultraclean graphene transfer method under mild conditions is highly desired. In this article, we report a naphthalene-assisted graphene transfer technique which provides a reliable route to residue-free transfer of graphene to both hard and flexible substrates. The quality of the transferred graphene was characterized with atomic force microscopy, scanning electron microscopy, and Raman spectroscopy. Field effect transistors, based on the naphthalene-transfered graphene, were fabricated and characterized. This work has the potential to broaden the applications of CVD graphene in fields where ultraclean graphene and mild graphene transfer conditions are required.

Application status of on-line nuclear techniques in analysis of coal quality

International Nuclear Information System (INIS)

Cai Shaohui

1993-01-01

Nuclear techniques are favourable for continuous on-line analysis, because they are fast, non-intrusive. They can be used in the adverse circumstances in coal industry. The paper reviews the application status of on-line nuclear techniques in analysis of coal quality and economic benefits derived from such techniques in developed countries

Nuclear activation techniques in the life sciences

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-08-15

The analysis of the elemental composition of biological materials is presently undertaken on a large scale in many countries around the world One recent estimate puts the number of such analyses at six thousand million single-element determinations per year, of which about sixteen million are for the so-called trace elements. Since many of these elements are known to play an important role in relation to health and disease, there is considerable interest in learning more about the ways in which they function in living organisms. Nuclear activation techniques, generally referred to collectively as 'activation analysis' constitute an important group of methods for the analysis of the elemental composition of biological materials. Generally they rely on the use of a research nuclear reactor as a source of neutrons for bombarding small samples of biological material, followed by a measurement of the induced radioactivity to provide an estimate of the concentrations of elements. Other methods of activation with Bremsstrahlung and charged particles may also be used, and have their own special applications. These methods of in vitro analysis are particularly suitable for the study of trace elements. Another important group of methods makes use of neutrons from isotopic neutron sources or neutron generators to activate the whole body, or a part of the body, of a living patient. They are generally used for the study of major elements such as Ca, Na and N. All these techniques have previously been the subject of two symposia organised by the IAEA in 1967 and 1972. The present meeting was held to review some of the more recent developments in this field and also to provide a viewpoint on the current status of nuclear activation techniques vis-a-vis other competing non-nuclear methods of analysis.

NST and NST integration: nuclear science and technique and nano science and technique

International Nuclear Information System (INIS)

Zhao Yuliang; Chai Zhifang; Liu Yuanfang

2008-01-01

Nuclear science is considered as a big science and also the frontier in the 20 th century, it developed many big scientific facilities and many technique platforms (e.g., nuclear reactor, synchrotron radiation, accelerator, etc.) Nuclear Science and Technology (NST) provide us with many unique tools such as neutron beams, electron beams, gamma rays, alpha rays, beta rays, energetic particles, etc. These are efficient and essential probes for studying many technique and scientific issues in the fields of new materials, biological sciences, environmental sciences, life sciences, medical science, etc. Nano Science and Technology (NST) is a newly emerging multidisciplinary science and the frontier in the 21 st century, it is expected to dominate the technological revolution in diverse aspects of our life. It involves diverse fields such as nanomaterials, nanobiological sciences, environmental nanotechnology, nanomedicine, etc. nanotechnology was once considered as a futuristic science with applications several decades in the future and beyond. But, the rapid development of nanotechnology has broken this prediction. For example, diverse types of manufactured nanomaterials or nanostructures have been currently utilized in industrial products, semiconductors, electronics, stain-resistant clothing, ski wax, catalysts, other commodity products such as food, sunscreens, cosmetics, automobile parts, etc., to improve their performance of previous functions, or completely create novel functions. They will also be increasingly utilized in medicines for purposes of clinic therapy, diagnosis, and drug delivery. In the talk, we will discuss the possibility of NST-NST integration: how to apply the unique probes of advanced radiochemical and nuclear techniques in nanoscience and nanotechnology. (authors)

Significant improvement of pig cloning efficiency by treatment with LBH589 after somatic cell nuclear transfer.

Science.gov (United States)

Jin, Jun-Xue; Li, Suo; Gao, Qing-Shan; Hong, Yu; Jin, Long; Zhu, Hai-Ying; Yan, Chang-Guo; Kang, Jin-Dan; Yin, Xi-Jun

2013-10-01

The low success rate of animal cloning by somatic cell nuclear transfer (SCNT) associates with epigenetic aberrancy, including the abnormal acetylation of histones. Altering the epigenetic status by histone deacetylase inhibitors (HDACi) enhances the developmental potential of SCNT embryos. In the current study, we examined the effects of LBH589 (panobinostat), a novel broad-spectrum HDACi, on the nuclear reprogramming and development of pig SCNT embryos in vitro. In experiment 1, we compared the in vitro developmental competence of nuclear transfer embryos treated with different concentrations of LBH589. Embryos treated with 50 nM LBH589 for 24 hours showed a significant increase in the rate of blastocyst formation compared with the control or embryos treated with 5 or 500 nM LBH589 (32.4% vs. 11.8%, 12.1%, and 10.0%, respectively, P < 0.05). In experiment 2, we examined the in vitro developmental competence of nuclear transfer embryos treated with 50 nM LBH589 for various intervals after activation and 6-dimethylaminopurine. Embryos treated for 24 hours had higher rates of blastocyst formation than the other groups. In experiment 3, when the acetylation of H4K12 was examined in SCNT embryos treated for 6 hours with 50 nM LBH589 by immunohistochemistry, the staining intensities of these proteins in LBH589-treated SCNT embryos were significantly higher than in the control. In experiment 4, LBH589-treated nuclear transfer and control embryos were transferred into surrogate mothers, resulting in three (100%) and two (66.7%) pregnancies, respectively. In conclusion, LBH589 enhances the nuclear reprogramming and developmental potential of SCNT embryos by altering the epigenetic status and expression, and increasing blastocyst quality. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

Development of buffalo (Bubalus bubalis embryonic stem cell lines from somatic cell nuclear transferred blastocysts

Directory of Open Access Journals (Sweden)

Syed Mohmad Shah

2015-11-01

Full Text Available We developed buffalo embryonic stem cell lines from somatic cell nuclear transfer derived blastocysts, produced by hand-guided cloning technique. The inner cell mass of the blastocyst was cut mechanically using a Microblade and cultured onto feeder cells in buffalo embryonic stem (ES cell culture medium at 38 °C in a 5% CO2 incubator. The stem cell colonies were characterized for alkaline phosphatase activity, karyotype, pluripotency and self-renewal markers like OCT4, NANOG, SOX2, c-Myc, FOXD3, SSEA-1, SSEA-4, TRA-1-60, TRA-1-81 and CD90. The cell lines also possessed the capability to differentiate across all the three germ layers under spontaneous differentiation conditions.

Practical applications of activation analysis and other nuclear techniques

International Nuclear Information System (INIS)

Lyon, W.S.

1982-01-01

Neeutron activation analysis (NAA) is a versatile, sensitive multielement, usually nondestructive analytical technique used to determine elemental concentrations in a variety of materials. Samples are irradiated with neutrons in a nuclear reactor, removed, and for the nondestructive technique, the induced radioactivity measured. This measurement of γ rays emitted from specific radionuclides makes possible the quantitative determination of elements present. The method is described, advantages and disadvantages listed and a number of examples of its use given. Two other nuclear methods, particle induced x-ray emission and synchrotron produced x-ray fluorescence are also briefly discussed

Use of the neutron activation technique: soil-plant transfer factor

International Nuclear Information System (INIS)

Silva, Wellington Ferrari da; Menezes, Maria Ângela de B.C.; Marques, Douglas José

2017-01-01

Recent studies have demonstrated the importance of the soil-plant transfer factor in the absorption and translocation of chemical elements, thus, it is possible to evaluate a better decision-making in the consecutive plantations. To determine these values, the content of a chemical element present in the plant or part of it with the total content present in the same soil where it is grown is considered. The objective of this study was to determine the concentrations of the chemical elements present in soil, leaf and grains corn, by neutron activation analysis and to compare the different soil-plant transfer factors. The samples were collected in a property located in the region of Biquinhas, MG, and irradiated in the TRIGA MARK I IPR-R1 CDTN / CNEN nuclear reactor. Thus, the concentrations of Br, Ce Fe, K, La, Na, Rb, Zn were determined. The soil-plant transfer factors for the elements found were varied, indicating a greater potassium absorption capacity (K). (author)

Use of the neutron activation technique: soil-plant transfer factor

Energy Technology Data Exchange (ETDEWEB)

Silva, Wellington Ferrari da, E-mail: wferrari250@yahoo.com.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Pós-Graduação em Ciências e Técnicas Nucleares; Menezes, Maria Ângela de B.C., E-mail: menezes@cdtn.br [Centro Desenvolvimento da Tecnologia Nuclear (SERTA/CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Serviço de Técnicas Analíticas. Laboratório de Ativação Neutrônica; Marques, Douglas José, E-mail: douglasjmarques81@yahoo.com.br [Universidade José do Rosário Vellano, Alfenas, MG (Brazil). Setor de Olericultura e Experimentação em Agricultura Orgânica

2017-07-01

Recent studies have demonstrated the importance of the soil-plant transfer factor in the absorption and translocation of chemical elements, thus, it is possible to evaluate a better decision-making in the consecutive plantations. To determine these values, the content of a chemical element present in the plant or part of it with the total content present in the same soil where it is grown is considered. The objective of this study was to determine the concentrations of the chemical elements present in soil, leaf and grains corn, by neutron activation analysis and to compare the different soil-plant transfer factors. The samples were collected in a property located in the region of Biquinhas, MG, and irradiated in the TRIGA MARK I IPR-R1 CDTN / CNEN nuclear reactor. Thus, the concentrations of Br, Ce Fe, K, La, Na, Rb, Zn were determined. The soil-plant transfer factors for the elements found were varied, indicating a greater potassium absorption capacity (K). (author)

Radiation safety in industrial applications of nuclear techniques

International Nuclear Information System (INIS)

Lam, E.S.

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

Radiation safety in industrial applications of nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

Research achievements in Bangladesh agriculture using nuclear techniques

International Nuclear Information System (INIS)

Sattar, M.A.

1997-01-01

Application of isotope and radiation techniques in Bangladesh agriculture has been initiated in 1961 with the establishment of Atomic Energy Agricultural Research Centre, Dhaka under the then Pakistan Atomic Energy Commission. The activity of the centre was strengthened and upgraded to the level of an institute as a constituent organization of Bangladesh Atomic Energy Commission in 1972. It was further reorganized, made an autonomous research organization under the Ministry of Agriculture in 1982 and renamed as Bangladesh Institute of Nuclear Agriculture. The other organizations involved in nuclear agricultural research are Institute of Food and Radiation Biology and Bangladesh Agricultural University. A number of technologies have been developed using nuclear techniques that imparted on agricultural development. Sixteen new crops were developed using physical (200-700 Gy gamma rays) and chemical mutagen (NaN 3 ). Soil fertility and plant nutrition technologies were developed using both stable and radio isotopes. The improved feeding strategies and utilization of locally available low quality feed material (rice straw) were determined using 51 Cr-EDTA and 125 I in order to have better livestock growth and reproduction ability. Several constraints related to nuclear research were identified. Increased government commitment and international cooperation are of the utmost importance for effective utilization of the benefits of nuclear technology and to face the increasing demand for food for the ever increasing population in years to come

Nuclear techniques for the determination of protein content in plant material

International Nuclear Information System (INIS)

Niemann, E.G.

1980-01-01

Elemental analysis for nitrogen has gained in importance over the last decade, as protein improvement and protein control in food and feed has come to be recognized as one of the most promising ways of overcoming deficiencies in food production and distribution. The need for fast and reliable screening methods has stimulated the improvement and automation of classic chemical methods for protein and nitrogen determination and, on the other hand, the development and adaptation of physical and nuclear analysis procedures. After about ten years of work this process has come to a stage where a critical evaluation of the existing methods seems necessary and justified. The present review describes and compares nuclear techniques for nitrogen determination in plant material. These include activation analysis techniques, based on various nuclear reactions, initiated by fast and thermal neutrons, energetic photons, protons, deuterons and α-particles. Other nuclear methods have been applied for nitrogen or protein determination, like ESCA, PIXE, NMR, NQR and Moessbauer spectroscopy, some of which possess good potential as screening methods. Depending on the needs, such as sample size, analysis rate and postulated accuracy, different nuclear techniques may be selected today for nitrogen screening. Some of the techniques discussed have additional potential for carbon or oxygen determination, for measuring depth or lateral N distribution, or for the recognition of the type of chemical N binding. Though most if not all techniques need further development for routine application, they are able to compete with chemical techniques in cost, rate and accuracy. (author)

Cloning of an endangered species (Bos gaurus) using interspecies nuclear transfer.

Science.gov (United States)

Lanza, R P; Cibelli, J B; Diaz, F; Moraes, C T; Farin, P W; Farin, C E; Hammer, C J; West, M D; Damiani, P

2000-01-01

Approximately 100 species become extinct a day. Despite increasing interest in using cloning to rescue endangered species, successful interspecies nuclear transfer has not been previously described, and only a few reports of in vitro embryo formation exist. Here we show that interspecies nuclear transfer can be used to clone an endangered species with normal karyotypic and phenotypic development through implantation and the late stages of fetal growth. Somatic cells from a gaur bull (Bos gaurus), a large wild ox on the verge of extinction, (Species Survival Plan cloned animals was gaurus in origin. The gaur nuclei were shown to direct normal fetal development, with differentiation into complex tissue and organs, even though the mitochondrial DNA (mtDNA) within all the tissue types evaluated was derived exclusively from the recipient bovine oocytes. These results suggest that somatic cell cloning methods could be used to restore endangered, or even extinct, species and populations.

Royal order relating to the transfer of nuclear materials and technology to non-nuclear weapon states

International Nuclear Information System (INIS)

1989-05-01

In implementation of the Act of 1981 on conditions for the export of nuclear materials, equipment and technological data, this Order sets down the detailed mechanisms for such transfers. Its object is to ensure that they will be carried out exclusively for peaceful purposes and in conformity with the NPT [fr

Physics of nuclear radiations concepts, techniques and applications

CERN Document Server

Rangacharyulu, Chary

2013-01-01

Physics of Nuclear Radiations: Concepts, Techniques and Applications makes the physics of nuclear radiations accessible to students with a basic background in physics and mathematics. Rather than convince students one way or the other about the hazards of nuclear radiations, the text empowers them with tools to calculate and assess nuclear radiations and their impact. It discusses the meaning behind mathematical formulae as well as the areas in which the equations can be applied. After reviewing the physics preliminaries, the author addresses the growth and decay of nuclear radiations, the stability of nuclei or particles against radioactive transformations, and the behavior of heavy charged particles, electrons, photons, and neutrons. He then presents the nomenclature and physics reasoning of dosimetry, covers typical nuclear facilities (such as medical x-ray machines and particle accelerators), and describes the physics principles of diverse detectors. The book also discusses methods for measuring energy a...

Proceedings of the Third National Conference on Nuclear Physics and Techniques

International Nuclear Information System (INIS)

Nguyen Thanh Binh; Nguyen Nhi Dien; Tran Kim Hung; Vuong Huu Tan

2000-01-01

The proceedings contains 130 papers of scientists from institutes, universities, enterprises nation-wide in Vietnam. Its subjects include: nuclear physics, theoretical physics, science and technology of nuclear reactor, application of nuclear techniques in industry, agriculture, biology, medicine, geo-hydrology, environmental protection, nuclear equipment, radiation technology, material technology, waste management, ect

Technique for simultaneous adjustment of large nuclear data libraries

International Nuclear Information System (INIS)

Harris, D.R.; Wilson, W.B.

1975-01-01

Adjustment of the nuclear data base to agree with integral observations in design work has been limited in part by problems in the required inversion of matrices. It is shown that this inversion problem can be circumvented and arbitrarily large nuclear data libraries can be adjusted simultaneously when the basic data are uncorrelated. The technique is illustrated by adjusting nuclear data to integral observations made on fast reactor benchmark critical assemblies. 3 tables

Testing techniques in nuclear, petroleum and metallurgic industries

International Nuclear Information System (INIS)

Anon.

1977-01-01

The nondestructive testing techniques by ultrasonic waves, eddy currents, acoustic emission used by Intercontrole (a CEA's affiliated firm in nuclear petrochemical, and engineering site measurements) are presented [fr

Governmental Decree No. 224/1997 of 13 August 1997 on fees levied on nuclear waste producers and on the transfer of such fees to the Nuclear Account

International Nuclear Information System (INIS)

1997-01-01

Nuclear power plants are obliged to pay a fee of CZK 50 per MWe produced. This amount is transferred to the Nuclear Account. The fee return is filed with the Czech Radioactive Repositories Administration. Minor radioactive waste producers only pay the radioactive waste storage cost; this sum is also transferred to the Nuclear Account. Each entity applying with the State Office for Nuclear Safety for a licence regarding activities which are associated with the production of radioactive wastes shall register with the Radioactive Repositories Administration as a prospective radioactive waste producer. (P.A.)

Program of nuclear techniques application (triennial 88-89-90)

International Nuclear Information System (INIS)

1988-01-01

A real analysis of the potentiality and the possibility from Nuclear Energetic Research Institute (IPEN) Sao Paulo, Brazil in realize the researches and developments for offering specialized services of nuclear techniques for using in bioengineering, industry, isotope production, IEA-R1 reactor irradiation and radiation detectors and sensors are described. (author)

Compartment modelling in nuclear medicine: a new program for the determination of transfer coefficients

International Nuclear Information System (INIS)

Hallstadius, L.

1986-01-01

In many investigations concerning transport/exchange of matter in a natural system, e.g. functional studies in nuclear medicine, it is advantageous to relate experimental results to a model of the system. A new computer program is presented for the determination of linear transfer coefficients in a compartment model from experimentally observed time-compartment content curves. The program performs a least-square fit with the specified precision of the observed values as weight factors. The resulting uncertainty in the calculated transfer coefficients may also be assessed. The application of the program in nuclear medicine is demonstrated and discussed. (author)

10 CFR 770.8 - May DOE transfer real property at defense nuclear facilities for economic development at less...

Science.gov (United States)

2010-01-01

... facilities for economic development at less than fair market value? 770.8 Section 770.8 Energy DEPARTMENT OF ENERGY TRANSFER OF REAL PROPERTY AT DEFENSE NUCLEAR FACILITIES FOR ECONOMIC DEVELOPMENT § 770.8 May DOE transfer real property at defense nuclear facilities for economic development at less than fair market...

Proceedings of XIV Workshop on Nuclear Physics. VIII International Symposium on Nuclear and Related Techniques. WONP-NURT 2013

International Nuclear Information System (INIS)

2013-02-01

This year 2013, the XIV Workshop on Nuclear Physics and VIII International Symposium on Nuclear and Related Techniques, WONP-NURT 2013 organized by the Center of Technological Applications and Nuclear Development from 5 to 8 February at the National Museum of Fine Arts. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM

Proceedings of XV Workshop on Nuclear Physics. IX International Symposium on Nuclear and Related Techniques. WONP-NURT 2015

International Nuclear Information System (INIS)

2015-02-01

This year 2015, the XV Workshop on Nuclear Physics and IX International Symposium on Nuclear and Related Techniques, WONP-NURT 2015 organized by the Center of Technological Applications and Nuclear Development from 9 to 13 February at the National Museum of Fine Arts. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM.

Voltage switching technique for detecting nuclear spin polarization in a quantum dot

International Nuclear Information System (INIS)

Takahashi, Ryo; Kono, Kimitoshi; Tarucha, Seigo; Ono, Keiji

2010-01-01

We have introduced a source-drain voltage switching technique for studying nuclear spins in a vertical double quantum dot. Switching the source-drain voltage between the spin-blockade state and the zero-bias Coulomb blockade state can tune the energy difference between the spin singlet and triplet, and effectively turn on/off the hyperfine interaction. Since the change in the nuclear spin state affects the source-drain current, nuclear spin properties can only be detected by transport measurement. Using this technique, we have succeeded in measuring the timescale of nuclear spin depolarization. Furthermore, combining this technique and an RF ac magnetic field, we successfully detected continuous-wave NMR signals of 75 As, 69 Ga, and 71 Ga, which are contained in a quantum dot. (author)

Nuclear techniques in animal production and health

Energy Technology Data Exchange (ETDEWEB)

Moustgaard, J [Institute of Physiology, Endocrinology and Bloodgrouping, The Royal Veterinary and Agricultural University, Copenhagen (Denmark)

1976-07-01

In the fight against animal diseases, especially parasitic infections, nuclear techniques have also proved to be of great value, namely in the production of irradiated vaccines against helminthic diseases. In this context it should be stressed that reduced productivity due to protein loss caused by intestinal parasites is a problem of paramount economic importance in developing as well as developed countries. Recently radioisotopes in the so-called radioimmunoassays have also been applied in determination of the hormonal status of farm animals and to elucidate its relation to the environment and to the physiological and nutritional condition of the animal. This rapidly developing technique may make it possible to control the reproductive performance of cattle and sheep more efficiently than has hitherto been the case. Production of animal protein of a high biological value for human nutrition is still a problem of great concern for the less developed countries. Without doubt the use of nuclear techniques, hand in hand with other research methods, will be of great help in overcoming this condition, always provided that the countries in question possess the necessary equipment and trained personnel.

Nuclear techniques in animal production and health

International Nuclear Information System (INIS)

Moustgaard, J.

1976-01-01

In the fight against animal diseases, especially parasitic infections, nuclear techniques have also proved to be of great value, namely in the production of irradiated vaccines against helminthic diseases. In this context it should be stressed that reduced productivity due to protein loss caused by intestinal parasites is a problem of paramount economic importance in developing as well as developed countries. Recently radioisotopes in the so-called radioimmunoassays have also been applied in determination of the hormonal status of farm animals and to elucidate its relation to the environment and to the physiological and nutritional condition of the animal. This rapidly developing technique may make it possible to control the reproductive performance of cattle and sheep more efficiently than has hitherto been the case. Production of animal protein of a high biological value for human nutrition is still a problem of great concern for the less developed countries. Without doubt the use of nuclear techniques, hand in hand with other research methods, will be of great help in overcoming this condition, always provided that the countries in question possess the necessary equipment and trained personnel

Novel imaging techniques for the nuclear microprobe

International Nuclear Information System (INIS)

Saint, A.

1998-01-01

Many of the developments of the scanning electron microscope (SEM) have been paralleled during the development of the scanning nuclear microprobe. Secondary electrons were used in the early development of both devices to provide specimen imaging due to the large numbers of secondaries produced per incident charged particle. Other imaging contrast techniques have also been developed on both machines. These include X-ray analysis, scattering contrast, transmission microscopy, channelling induced charge and others. The 'cross-section dependent' imaging techniques such as PIXE, RBS, NRA, etc., rely on the beam current on target for a given resolution. This has prompted research and development of brighter ion sources to maintain probe resolution at high beam current. Higher beam current bring problems with beam damage to the specimen. Low beam current techniques however rely on high countrate data collection systems, but this is only for spectroscopy. To produce an image we can increase beam currents to produce live-time images for specimen manipulation and observation. The work presented here will focus on some developments in live-time imaging with a nuclear micro probe that have taken place recently at the School of Physics, Microanalytical Research Centre (MARC), University of Melbourne

Nuclear analytical techniques for on-line elemental analysis in industry

International Nuclear Information System (INIS)

1988-06-01

This report is the result of an advisory group meeting held in Espoo, Finland, 1-5 June, 1987. The purpose of the meeting was to assess the present status and development of nuclear analytical techniques used for industrial process control. The report gives an overview of the different nuclear techniques used for process control and the most important applications. A separate abstract was prepared for each of the 7 papers presented at the meeting. Refs, figs and tabs

Technique of nuclear reactors controls; Technique des controles des reacteurs nucleaires

Energy Technology Data Exchange (ETDEWEB)

Weill, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1953-12-15

This report deal about 'Techniques of control of the nuclear reactors' in the goal to achieve the control of natural uranium reactors and especially the one of Saclay. This work is mainly about the measurement into nuclear parameters and go further in the measurement of thermodynamic variables,etc... putting in relief the new features required on behalf of the detectors because of their use in the thermal neutrons flux. In the domain of nuclear measurement, we indicate the realizations and the results obtained with thermal neutron detectors and for the measurement of ionizations currents. We also treat the technical problem of the start-up of a reactor and of the reactivity measurement. We give the necessary details for the comprehension of all essential diagrams and plans put on, in particular, for the reactor of Saclay. (author) [French] Nous avons aborde le probleme de la ''Technique du Controle des reacteurs nucleaires'' dans le but de realiser le controle du reacteur de Saclay. C'est ainsi que nous avons ete amene a etudier le probleme dans son ensemble, tel qu'il se pose pour tout reacteur a uranium naturel. Ce travail traite principalement du domaine des mesures a caractere nucleaire et s'etend dans le domaine des mesures thermodynamque de niveaux, etc... mettant en relief les caracteristiques nouvelles exigees de la part des detecteurs du fait de leur utilisation dans le flux de neutrons thermiques. Dans le domaine de mesures nucleaires, nous indiquons principalement les realisations et les resultats obtenus pour les detecteurs de neutrons thermiques et pour la mesure de courants d'ionisations. Nous traitons egalement du probleme technique du demarrage d'un reacteur et du probleme de la mesure de la reactivite. Nous donnons les details necessaires a la comrehension de tous les schemas et plans de cablages essentiels mis au point, en particulier, pour le reacteur de Saclay. (auteur)

Production of cloned NIBS (Nippon Institute for Biological Science) and α-1, 3-galactosyltransferase knockout MGH miniature pigs by somatic cell nuclear transfer using the NIBS breed as surrogates

Science.gov (United States)

Shimatsu, Yoshiki; Yamada, Kazuhiko; Horii, Wataru; Hirakata, Atsushi; Sakamoto, Yuji; Waki, Shiori; Sano, Junichi; Saitoh, Toshiki; Sahara, Hisashi; Shimizu, Akira; Yazawa, Hajime; Sachs, David H.; Nunoya, Tetsuo

2013-01-01

Background Nuclear transfer (NT) technologies offer a means for producing the genetically modified pigs necessary to develop swine models for mechanistic studies of disease processes as well as to serve as organ donors for xenotransplantation. Most previous studies have used commercial pigs as surrogates. Method and Results In this study, we established a cloning technique for miniature pigs by somatic cell nuclear transfer (SCNT) using Nippon Institute for Biological Science (NIBS) miniature pigs as surrogates. Moreover, utilizing this technique, we have successfully produced an α-1, 3-galactosyltransferase knockout (GalT-KO) miniature swine. Fibroblasts procured from a NIBS miniature pig fetus were injected into 1312 enucleated oocytes. The cloned embryos were transferred to 11 surrogates of which five successfully delivered 13 cloned offspring; the production efficiency was 1.0% (13/1312). In a second experiment, lung fibroblasts obtained from neonatal GalT-KO MGH miniature swine were used as donor cells and 1953 cloned embryos were transferred to 12 surrogates. Six cloned offspring were born from five surrogates, a production efficiency of 0.3% (6/1953). Conclusions These results demonstrate successful establishment of a miniature pig cloning technique by SCNT using NIBS miniature pigs as surrogates. To our knowledge, this is the first demonstration of successful production of GalT-KO miniature swine using miniature swine surrogates. This technique could help to ensure a stable supply of the cloned pigs through the use of miniature pig surrogates and could expand production in countries with limited space or in facilities with special regulations such as specific pathogen-free or good laboratory practice. PMID:23581451

Revival of extinct species using nuclear transfer: hope for the mammoth, true for the Pyrenean ibex, but is it time for "conservation cloning"?

Science.gov (United States)

Piña-Aguilar, Raul E; Lopez-Saucedo, Janet; Sheffield, Richard; Ruiz-Galaz, Lilia I; Barroso-Padilla, Jose de J; Gutiérrez-Gutiérrez, Antonio

2009-09-01

Recent accomplishments in the fields of nuclear transfer and genomics, such as the cloned offspring production from frozen mouse cells, cryopreserved at not too low temperatures without cryoprotectors; or the sequencing of wooly mammoth genome, have opened the opportunity for the revival of extinct species. As expected, they are receiving a lot of publicity in the media and also scientific attention. Furthermore, it was recently published the "revival" of the first extinct subspecie: the Pyrenean ibex (Capra pyrenaica pyrenaica), a wild goat extinct in 2000. This strengthens the field of cloning as it had been tarnished by induced pluripotent stem cells (iPS) and other methods of reprogramming. However, for biological conservation purposes, cloning is not generally accepted as an alternative for animal conservation, and there is an ongoing debate between reproductive scientists and conservation specialists. Although we believe that nuclear transfer technologies have an opportunity in conservation efforts for some species that are on the brink of extinction and that population status, geographical isolation, reproductive characteristics, and human pressure create a situation that is almost unsustainable. In this article we discuss the barriers in cloning mammoths and cloning controversies in conservation from a zoological perspective, citing the species that might benefit from nuclear transfer techniques in the arduous journey so as not to disappear forever from this, our world.

Korean system of export control to support the commercial nuclear transfer to UAE

International Nuclear Information System (INIS)

Cho, Young Ho

2011-01-01

In December 2009, the Republic of Korea won the contract to build 4 1,400 MW nuclear power reactors worth USD 20 billion in the UAE. The states-owned KEPCO will complete the turnkey project to the UAE including design, engineering, construction, nuclear fuel, operations, maintenance and technical support. Since sensitive nuclear technologies convertible to military purpose can be spread by the transfer of commercial nuclear power plant, it is essential prerequisite to implement nuclear export control tenaciously and effectively. About twenty years have passed since the Republic of Korea introduced export control system in domestic laws and regulations. Marking a major historical milestone in 2009 by ranking among global nuclear suppliers, the Korean government made a major step forward in export control framework to support its next nuclear export goal. (orig.)

Nuclear rotational population patterns in heavy-ion scattering and transfer reactions

Energy Technology Data Exchange (ETDEWEB)

Rasmussen, J O; Stoyer, M A [Lawrence Berkeley Lab., CA (USA); Canto, L F; Donangelo, R [Universidade Federal do Rio de Janeiro, RJ (Brazil); Ring, P [Technische Univ. Muenchen, Garching (Germany, F.R.). Fakultaet fuer Physik

1991-05-01

A model of {sup 239}Pu with decoupled neutron is used for theoretical calculations of rotational population patterns in heavy ion inelastic scattering and one-neutron transfer reactions. The system treated in {sup 90}Zr on {sup 239}Pu at the near-barrier energy of 500 MeV and backscattering angles of 180deg and 140deg. The influence of the complex nuclear optical potential is seen to be very strong, and the Nilsson wave function of the odd neutron produces a distinctive pattern in the transfer reaction. (orig.).

Energy dependence of the Coulomb-nuclear interference at small momentum transfers

International Nuclear Information System (INIS)

Selyugin, O.V.

1997-01-01

The analyzing power of the elastic proton-proton scattering at small momentum transfers and the effect of the Coulomb-nuclear interference are examined on the basis of the available experimental data at p L from 6 up to 200 GeV/c taking account of a phenomenological analysis at p L =6 GeV/c and of the dynamic high energy spin model. The structure of the spin-dependent elastic scattering amplitude at small momentum transfers is obtained. The predictions for the analyzing power at RHIC energies are made

Effect of two activation treatments and age of blastomere karyoplasts on in vitro development of bovine nuclear transfer embryos

DEFF Research Database (Denmark)

Booth, Paul J; Holm, Peter; Vajta, Gabor

2001-01-01

The yield and quality of (a) parthenogenetic blastocysts produced by two activation treatments (cycloheximide [CHX] or 6-dimethylaminopurine [DMAP]) and (b) nuclear transfer blastocysts generated using these two activation treatments and three different ages of karyoplast derived from day 3, 4......, or 5 in vitro produced donor embryos, were examined in order to define an optimal nuclear transfer protocol. The two activation protocols comprised calcium ionophore followed by either CHX or DMAP. Parthenogenetic blastocyst yields were greater (P ....7 +/- 5.1 vs. 31.4 +/- 4.5 [mean +/- SEM]). In contrast, nuclear transfer blastocyst rates per fused embryo were lower (P

Research achievements in Bangladesh agriculture using nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Sattar, M.A. [Bangladesh Institute of Nuclear Agriculture, Mymensingh, (Bangladesh)

1997-10-01

Application of isotope and radiation techniques in Bangladesh agriculture has been initiated in 1961 with the establishment of Atomic Energy Agricultural Research Centre, Dhaka under the then Pakistan Atomic Energy Commission. The activity of the centre was strengthened and upgraded to the level of an institute as a constituent organization of Bangladesh Atomic Energy Commission in 1972. It was further reorganized, made an autonomous research organization under the Ministry of Agriculture in 1982 and renamed as Bangladesh Institute of Nuclear Agriculture. The other organizations involved in nuclear agricultural research are Institute of Food and Radiation Biology and Bangladesh Agricultural University. A number of technologies have been developed using nuclear techniques that imparted on agricultural development. Sixteen new crops were developed using physical (200-700 Gy gamma rays) and chemical mutagen (NaN{sub 3}). Soil fertility and plant nutrition technologies were developed using both stable and radio isotopes. The improved feeding strategies and utilization of locally available low quality feed material (rice straw) were determined using {sup 51}Cr-EDTA and {sup 125}I in order to have better livestock growth and reproduction ability. Several constraints related to nuclear research were identified. Increased government commitment and international cooperation are of the utmost importance for effective utilization of the benefits of nuclear technology and to face the increasing demand for food for the ever increasing population in years to come 32 refs., 1 tab.

Communications Received from Certain Member States Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology. Nuclear Transfers and Nuclear-Related Dual-Use Transfers; Comunicaciones Recibidas De Diversos Estados Miembros Relativas A Las Directrices Para La Exportacion De Tecnologia, Equipo Y Materiales Nucleares. Transferencias Nucleares Y Transferencias De Equipo, Materiales V Tecnologia Afin Al Doble Uso En Materia Nuclear

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-04-15

The Director General has received a Note Verbale dated 5 March 1993 from the Ministry of Foreign Affairs of the Slovak Republic. The purpose of the Note Verbale is to provide information on that Governments' guidelines for Nuclear Transfers and for Transfers of of Nuclear-related Dual-use Equipment, Material and Related Technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Note Verbale is annexed hereto [Spanish] El Director General ha recibido una nota verbal de fecha 5 de marzo de 1993 del Ministerio de Relaciones Exteriores de la RepUblica Eslovaca. El objetivo de la nota verbal es proporcionar informaciOn sobre las Directrices para las transferencias nucleares y las Directrices para la transferencia de equipo, materiales y tecnologia afin al doble uso en materia nuclear, de dicho Gobierno. Atendiendo a los deseos expresados al final de la nota verbal, se adjunta al presente documento el texto de la nota verbal.

Methods and techniques of nuclear in-core fuel management

International Nuclear Information System (INIS)

Jong, A.J. de.

1992-04-01

Review of methods of nuclear in-core fuel management (the minimal critical mass problem, minimal power peaking) and calculational techniques: reactorphysical calculations (point reactivity models, continuous refueling, empirical methods, depletion perturbation theory, nodal computer programs); optimization techniques (stochastic search, linear programming, heuristic parameter optimization). (orig./HP)

Transfer printing techniques for materials assembly and micro/nanodevice fabrication.

Science.gov (United States)

Carlson, Andrew; Bowen, Audrey M; Huang, Yonggang; Nuzzo, Ralph G; Rogers, John A

2012-10-09

Transfer printing represents a set of techniques for deterministic assembly of micro-and nanomaterials into spatially organized, functional arrangements with two and three-dimensional layouts. Such processes provide versatile routes not only to test structures and vehicles for scientific studies but also to high-performance, heterogeneously integrated functional systems, including those in flexible electronics, three-dimensional and/or curvilinear optoelectronics, and bio-integrated sensing and therapeutic devices. This article summarizes recent advances in a variety of transfer printing techniques, ranging from the mechanics and materials aspects that govern their operation to engineering features of their use in systems with varying levels of complexity. A concluding section presents perspectives on opportunities for basic and applied research, and on emerging use of these methods in high throughput, industrial-scale manufacturing. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Solutions obtained to international heat transfer benchmarking problems for nuclear fuel casks using Q/TRAN

International Nuclear Information System (INIS)

Sanchez, L.C.

1987-02-01

In 1985 Sandia National Laboratories participated in the Nuclear Energy Agency Committee on Reactor Physics (NEACRP) Specialists' Meeting on Heat Transfer Assessment of Transportation Packages. The objective of the meeting was to establish a set of model problems for use in comparing the performance of thermal analysis computer codes that may be used in the design of nuclear fuel shipping casks. The selected problems are to be used to compare code results for the thermal phenomena of conduction, convection, and radiation in cask-like problems. Two model problems were used in this study. The first problem required the determination of the steady-state temperatures of a 16 x 16 array of heated and unheated pins (representing fuel and control rod positions) of a simulated PWR fuel assembly. The second problem required the determination of transient temperatures of a finned surface (representing the external surface of a cask) subjected to an internal heat flux and to an external engulfing fire. Solutions to the problems were obtained with the code ''Q/TRAN.'' Solutions and descriptions of the necessary modeling techniques are given in this report

Proceedings of the twenty third national heat and mass transfer conference and first international ISHMT-ASTFE heat and mass transfer conference: souvenir and book of abstracts

International Nuclear Information System (INIS)

2015-01-01

The conference covered various aspects of heat and mass transfer like Aero-thermodynamics, Atmospheric flows, Biological heat and mass transfer, Combustion and reactive flows, Cryogenics, Electronic and photonic cooling, Energy engineering, Environmental engineering, Experimental techniques, Heat transfer enhancement, Heat transfer equipment's, Heat transfer in nuclear applications, Mass transfer, Materials processing and manufacturing, Microscale and nanoscale transport, Multiphase transport and phase change, Multi mode heat transfer, Numerical methods, Refrigeration and air conditioning, Space heat transfer, Transport phenomena in porous media, and Turbulent transport. Papers relevant to INIS are indexed separately

Active neutron technique for detecting attempted special nuclear material diversion

International Nuclear Information System (INIS)

Smith, G.W.; Rice, L.G. III.

1979-01-01

The identification of special nuclear material (SNM) diversion is necessary if SNM inventory control is to be maintained at nuclear facilities. (Special nuclear materials are defined for this purpose as either 235 U of 239 Pu.) Direct SNM identification by the detection of natural decay or fission radiation is inadequate if the SNM is concealed by appropriate shielding. The active neutron interrogation technique described combines direct SNM identification by delayed fission neutron (DFN) detection with implied SNM detection by the identification of materials capable of shielding SNM from direct detection. This technique is being developed for application in an unattended material/equipment portal through which items such as electronic instruments, packages, tool boxes, etc., will pass. The volume of this portal will be 41-cm wide, 53-cm high and 76-cm deep. The objective of this technique is to identify an attempted diversion of at least 20 grams of SNM with a measurement time of 30 seconds

Low cost nuclear data printer

International Nuclear Information System (INIS)

Punnachiya, S.; Aungkultewaraksa, S.; Pengphol, S.

1988-01-01

The data printer is essential for nuclear radiation measuring system. A low cost nuclear data printer is developed from an electronic printing calculator. It can transfer the counting data from scaler and printout. The basic concept is that the BCD data is transferred and converted to decimal data sequentially by the interfacing circuit. After the counting time is ended, each digit is transferred to the printing calculator by data bus, digit by digit, until all the data are transferred and printed out. The low cost nuclear data printer consists of a CASIO model HR-8 electronic printing calculator and a printer interface model either NT 2602 or NT 2603 which are designed for printing out 6 digit data from the counter/timer CANBERRA model 1772. In this research the NT 2602 interface is designed only to transfer and printing out data. While the NT 2603 interface is designed to transfer, print out and average data. The NT 2603 can average from 2 to 9 sets of counting data. This data interfacing technique can be applied to work with all scientific instruments having readout as digital display and all kinds of electronic printing calculator

International conference on isotopic and nuclear analytical techniques for health and environment. Unedited papers

International Nuclear Information System (INIS)

2004-01-01

The IAEA has been supporting nuclear and isotopic analytical techniques as part of its mandate to foster the peaceful uses of nuclear energy for many years. Nuclear analytical laboratories have been installed and upgraded through technical co-operation assistance in many laboratories of Member States. These techniques, including INAA, CRF, PIXE, stable isotopes and radioisotopes, α, β, γ spectrometry, Moessbauer spectrometry, etc., have been applied to a wide range of subjects with varying success. Nuclear analytical techniques, featuring some intrinsic quality control aspects, such as multi-nuclide analysis, frequently serve as 'reference methods' to crosscheck critical results. As nuclear properties of elements are targeted, matrix problems seem to be negligible. In light of its continued commitment and support, the IAEA organized the International Conference on Isotopic and Nuclear Analytical Techniques for Health and Environment. Out of 220 from 61 countries who applied for participation, 155 official participants and five observers from 47 countries were in attendance, with 67 from 32 developing countries and 21 from international organizations, including the World Health Organization. Eleven plenary sessions were held. Also conducted was a panel discussion on Human Capacity Development Needs in the Areas of Analytical Quality Control Services (AQCS), Radiochemistry and Nutrition. The scientific sessions were divided into several topics, which reflect some of the important activities of the IAEA's Department of Nuclear Sciences and Applications (NA): - Isotopic and nuclear techniques (general); - Metrology and quality assurance in nuclear measurements; - Nuclear analytical techniques for environmental monitoring; - Radioecology; - Environmental monitoring; - Radiological safety of food and water; - Methodological aspects of stable isotope techniques in health and environment; - Applications of isotopic techniques in health and environment; - New

Nuclear techniques for on-line analysis in the mineral and energy industries

International Nuclear Information System (INIS)

Sowerby, B.D.; Watt, J.S.

1994-01-01

Nuclear techniques are the basis of many on-line analysis systems which are now widely used in the mineral and energy industries. Some of the systems developed by the CSIRO depend entirely on nuclear techniques; others use a combination of nuclear techniques and microwave, capacitance, or ultrasonic techniques. The continuous analysis and rapid response of these CSIRO systems has led to improved control of mining, processing and blending operations, with increased productivity valued at A$50 million per year to Australia, and $90 million per year world wide. This paper reviews developments in nuclear on-line analysis systems by the On-Line Analysis Group in CSIRO at Lucas Heights. Commercialised systems based on this work analyse mineral and coal slurries and determine the ash and moisture contents of coal and coke on conveyors. This paper also reviews two on-line nuclear analysis systems recently developed and licensed to industry, firstly for the determination of the mass flow rates of oil/water/gas mixtures in pipelines, and secondly for determination of the moisture, specific energy, ash and fouling index in low rank coals. 8 refs., 3 tabs., 4 figs

Transfer parameters of fission and activation products present in effluents of nuclear power reactors

International Nuclear Information System (INIS)

Cancio, D.; Menossi, C.A.; Ciallella, N.R.

1978-01-01

The paper presents results of research carried out in Argentina on transfer parameters of fission and activation products which may be present in the effluents of nuclear power reactors. For some nuclides, as Sr-90, Co-137 and I-131, the parameters were obtained by studies of the fallout, from measurements of integrated levels in the environment and in the food chains. Other values are concentration factors derived from laboratory and field experiments. They refer to fish, molluscs, crustaces and fresh water plants, for several fission and activation nuclides. Transfer parameters obtained have been of significant importance for environmental assessments, relating to nuclear installations in Argentina. (author)

Dual winch nuclear fuel transfer system providing more reliable fuel transfer during refueling operations

International Nuclear Information System (INIS)

Meuschke, R.E.; Harper, M.J.; Stefko, D.J.

1991-01-01

This paper describes a nuclear power plant having an auxiliary building, a containment building having the wall, a track extending through a transfer tube within the containment wall, and a fuel transfer system for moving fuel assemblies along the track between the auxiliary building side and the containment building side of the containment wall. It comprises: a car having wheels for movement along spaced rails of the track and further having a carrying basket for one or more fuel assemblies; winch means located on the auxiliary building side of the containment wall and above the water level existing over the track during refueling operations to drive the car along the track; first cable means and second cable means extending substantially vertically downward from the winch means to the tack level; first sheave means for directing the first and the second cable means substantially in the horizontal direction along the track; means for securing the first cable means to the car so that winch pulling force on the first cable means drives the car away from the containment building; second sheave means located near the containment end of the transfer tube

Application of nuclear and allied techniques for the characterisation of forensic samples

International Nuclear Information System (INIS)

Sudersanan, M.; Kayasth, S.R.; Pant, D.R.; Chattopadhyay, N.; Bhattacharyya, C.N.

2002-01-01

Full text: Forensic science deals with the application of various techniques for physics, chemistry and biology for crime investigation. The legal implication of such analysis put considerable restriction on the choice of analytical techniques. Moreover, the unknown nature of the materials, the limited availability of samples and the large number of elements to be analysed put considerable strain on the analytical chemist on the selection of the appropriate technique. The availability of nuclear techniques has considerably enhanced the scope of forensic analysis. This paper deals with the recent results on the use of nuclear and allied analytical techniques for forensic applications. One of the important types of samples of forensic importance pertain to the identification of gunshot residues. The use of nuclear techniques has considerably simplified the interpretation of results through the use of appropriate elements like Ba, Cu, Sb, Zn, As and Sn etc. The combination of non-nuclear techniques for elements like Pb and Ni which are not easily amenable to be analysed by NAA and the use of appropriate separation procedure has led to the use of this method as a valid and versatile analytical procedure. In view of the presence of a large amounts of extraneous materials like cloth, body tissues etc in these samples and the limited availability of materials, the procedures for sample collection, dissolution and analysis have been standardized. Analysis of unknown materials like powders, metallic pieces etc. for the possible presence of nuclear materials or as materials in illicit trafficking is becoming important in recent years. The use of multi-technique approach is important in this case. Use of non-destructive techniques like XRF and radioactive counting enables the preliminary identification of materials and for the detection of radioactivity. Subsequent analysis by NAA or other appropriate analytical methods allows the characterization of the materials. Such

Frontier of Advanced Accelerator Applications and Medical Treatments Using Nuclear Techniques. Abstract

International Nuclear Information System (INIS)

2015-01-01

To address the challenges of research-based practice, developing advanced accelerator applications, and medical treatments using nuclear tecniqoes, researchers from Rajamakala University of Technology Lanna, Office of Atoms for Peace, and Chiang Mai University have joined in hosting this conference. Nuclear medicine, amedical specialty, diagnoses and treats diseases in a safe and painless way. Nuclear techniques can determine medical information that may otherwise be unavailable, require surgery, or necessitate more expensive and invasive diagnostic tests. Advance in nuclear techniques also offer the potential to detect abnormalities at earlier stages, leasding to earlier treatment and a more successful prognosis.

Scintigraphic instruments and techniques in nuclear medicine

International Nuclear Information System (INIS)

Bornand, Bernard; Soussaline, Francoise; CEA, 91 - Orsay

1978-01-01

A short survey of data processing techniques in medical scintigraphy is presented. Three lists of abstracts being firstly from reviews, secondly from proceedings, and thirdly of reports and thesis, are presented as an addendum to the bibliography CEA-BIB-214, for the period 1975 up to march 1977. An index of authors and subjects is included. Finally an appendix with 18 patents is attached. Several bibliographical reviews: Excerpta Medica (Nuclear Medicine) Abstract Journal, INIS Atomindex, Nuclear Science Abstracts, together with a number of special journals and documents, recently published, have been used for this work [fr

Review of nuclear techniques in South African agricultural research: 1963-1984

International Nuclear Information System (INIS)

Marais, P.G.; Kotze, W.A.G.; Joubert, M.E.; Huismans, H.; Brodrick, H.T.

1985-01-01

The use of nuclear techniques in agriculture research in the RSA was reviewed at a National Conference on Nuclear Energy in 1963. Since then, 573 publications on the use of nuclear techniques in agriculture have appeared, which can be classified as follows: zoology; botany; food irradiation; soil and plant relations; soil moisture and ground water studies; and other radiation and tracer applications. A survey of literature on the use of radioactive isotopes in agriculture published between 1973 and 1980, including South African publications, was compiled by the Atomic Energy Board in 1980 but did not include any review of the scientific material

Proceedings of VII International Symposium on Nuclear and Related Techniques. XIII Workshop on Nuclear Physics. WONP-NURT 2011

International Nuclear Information System (INIS)

2011-02-01

This year the XIII Workshop on Nuclear Physics (WONP) and the VII Symposium on Nuclear and Related Techniques (NURT) are organized jointly, by Instituto Superior de Tecnologias y Ciencias Aplicadas and Centro de Aplicaciones Tecnologicas y Desarrollo Nuclear. Both events gather scientists from several countries with top research work on nuclear physics and its applications. WONP has been carried out since 1994 promoting an ever-exchanging exchange between professionals of various nuclear and applied physics fields, those related to environmental and health care. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM

Proceedings of VI International Symposium on Nuclear and Related Techniques. XII Workshop on Nuclear Physics. WONP-NURT 2009

International Nuclear Information System (INIS)

2009-02-01

This year the XII Workshop on Nuclear Physics (WONP) and the VI Symposium on Nuclear and Related Techniques (NURT) are organized jointly, by Instituto Superior de Tecnologias y Ciencias Aplicadas and Centro de Aplicaciones Tecnologicas y Desarrollo Nuclear. Both events gather scientists from several countries with top research work on nuclear physics and its applications. WONP has been carried out since 1994 promoting an ever-exchanging exchange between professionals of various nuclear and applied physics fields, those related to environmental and health care. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM

Monitoring glycolipid transfer protein activity and membrane interaction with the surface plasmon resonance technique.

Science.gov (United States)

Ohvo-Rekilä, Henna; Mattjus, Peter

2011-01-01

The glycolipid transfer protein (GLTP) is a protein capable of binding and transferring glycolipids. GLTP is cytosolic and it can interact through its FFAT-like (two phenylalanines in an acidic tract) motif with proteins localized on the surface of the endoplasmic reticulum. Previous in vitro work with GLTP has focused mainly on the complete transfer reaction of the protein, that is, binding and subsequent removal of the glycolipid from the donor membrane, transfer through the aqueous environment, and the final release of the glycolipid to an acceptor membrane. Using bilayer vesicles and surface plasmon resonance spectroscopy, we have now, for the first time, analyzed the binding and lipid removal capacity of GLTP with a completely label-free technique. This technique is focused on the initial steps in GLTP-mediated transfer and the parameters affecting these steps can be more precisely determined. We used the new approach for detailed structure-function studies of GLTP by examining the glycolipid transfer capacity of specific GLTP tryptophan mutants. Tryptophan 96 is crucial for the transfer activity of the protein and tryptophan 142 is an important part of the proteins membrane interacting domain. Further, we varied the composition of the used lipid vesicles and gained information on the effect of membrane properties on GLTP activity. GLTP prefers to interact with more tightly packed membranes, although GLTP-mediated transfer is faster from more fluid membranes. This technique is very useful for the study of membrane-protein interactions and lipid-transfer rates and it can easily be adapted to other membrane-interacting proteins. Copyright © 2010 Elsevier B.V. All rights reserved.

Heterodyne technique for measuring the amplitude and phase transfer functions of an optical modulator

DEFF Research Database (Denmark)

Romstad, Francis Pascal; Birkedal, Dan; Mørk, Jesper

2002-01-01

In this letter, we propose a technique based on heterodyne detection for accurately and simultaneously measuring the amplitude and phase transfer functions of an optical modulator. The technique is used to characterize an InGaAsp multiple quantum-well electroabsorption modulator. From the measure...... the measurements we derive the small-signal alpha-parameter and the time-dependent chirp for different operation conditions.......In this letter, we propose a technique based on heterodyne detection for accurately and simultaneously measuring the amplitude and phase transfer functions of an optical modulator. The technique is used to characterize an InGaAsp multiple quantum-well electroabsorption modulator. From...

Polymer Light-Emitting Diode Prepared by Floating-Off Film-Transfer Technique

KAUST Repository

Park, Jihoon

2015-12-22

© 2015 Copyright Taylor & Francis Group, LLC. Floating-off film-transfer technique was used for the formation of semiconducting polymer multi-layers and the effect on the performance of polymer light-emitting diode (PLED) was studied. This method made it possible to avoid the solvent compatibility problem that was typically encountered in successive coating of polymeric multilayer by solution processing. F8BT and MEH-PPV were used for electron transporting layer (ETL) and for emissive layer, respectively. Current-voltage-luminance characteristics and luminescence efficiency results showed that the insertion of ETL by floating-off film-transfer technique followed by proper heat treatment resulted in a significant improvement in PLED operation due to its electron-transporting and hole-blocking abilities.

Isotopic Determination of Nuclear Materials Using Nuclear Fission Track Registration Technique and Thermal Ionization Mass Spectrometric Technique

International Nuclear Information System (INIS)

Jeon, Young Sin; Pyo, Hyeong Yeol; Park, Yong Joon; Song, Kyu Seok; Kim, Won Ho; Jee, Kwang Yong

2007-05-01

It is very important to develope the technology for the determination of isotopic ratios of hot particles( 234 U, 235 U, 236 U etc.) detected from swipe samples of various nuclear facilities. This technology is highly competitive internationally and has to be established independently as long as our government maintains atomic energy and treats nuclear materials. In this text, sample pretreatment procedure, gamma-ray counting, alpha or fission track techniques, isotopic analysis of U and Pu, background problems and detection limits for mass determination, and their application to the real swipe sample were described with detailed procedure. This technology would contribute to the Korean economy's high growth rate as well as to superiority of government's leading research and development programs if successfully established

Analysis of archaeological pieces with nuclear techniques

International Nuclear Information System (INIS)

Tenorio, D.

2002-01-01

In this work nuclear techniques such as Neutron Activation Analysis, PIXE, X-ray fluorescence analysis, Metallography, Uranium series, Rutherford Backscattering for using in analysis of archaeological specimens and materials are described. Also some published works and thesis about analysis of different Mexican and Meso american archaeological sites are referred. (Author)

Nuclear techniques in industry

International Nuclear Information System (INIS)

Barnette, P.

The long term development and successful utilization of the Tongonan geothermal field for electric power generation is ultimately a function of the response of the reservoir to extensive exploitation. A field drawdown test of several years duration has been planned to test this response. A number of nuclear chemical techniques have been incorporated into this to assist in quantitatively tracing the subsurface movements of both reservoir and reinjected fluids; and to provide an early warning of changes in the physical and chemical properties of the reservoir fluids with respect to natural recharge. The programme will be implemented by Philippine Atomic Energy Commission (PAEC) under contract to Philippine National Oil Company - Energy Development Corporation (PNOC-EDC). (author)

Fluxes of radionuclides in the agricultural production after a nuclear accident: countermeasures and decontamination techniques; Flux des radionucleides dans les productions agricoles suite a un accident nucleaire: contre-mesures et techniques de rehabilitation

Energy Technology Data Exchange (ETDEWEB)

Jouve, A. [CEA Centre d`Etudes Nucleaires de Cadarache, 13 -Saint-Paul-lez-Durance (France)]|[Universite de Provence, 13 - Marseille (France)

1997-12-31

This thesis deals with the radiological consequences of a nuclear accident through the radioactive contamination of the food chain and the subsequent countermeasures for decreasing the fluxes of radionuclides and decontaminating agricultural lands. After a brief summary of the radioprotection ground and context in case of a nuclear accident, this work surveys existing data on the fluxes of radionuclides in soils and from soil to plants. The research work focuses on both the prediction of the fluxes of radionuclides and possible countermeasures: the measurement of the bioavailability of radionuclides in the soil solution, its use in a mathematical expression to quantify the soil-to-plant transfer of caesium and strontium, and the perspectives of an innovative technique of soil decontamination. The obtained results show that based on 4 coefficients, it is possible to predict crop contamination within a 3 % confidence interval: the fluid solid distribution coefficient of radionuclides kd, the amount of chemical analogues of caesium and strontium, i.e. potassium and calcium, respectively, soil pH and a constant characterising the plant species that is concerned. However, it generally appears from soil to plant transfer studies that the reduction of the fluxes of radionuclides is not a promising way of radiological exposure mitigation after a nuclear accident. The work performed shows that it is more efficient to tackle the source of the contamination, i.e. decontaminate the soil. The proposed technique of soil scraping using a turf harvester appears to be the most advantageous among the tested options, for the decontamination of peat-bog meadows. (author).

Fluxes of radionuclides in the agricultural production after a nuclear accident: countermeasures and decontamination techniques; Flux des radionucleides dans les productions agricoles suite a un accident nucleaire: contre-mesures et techniques de rehabilitation

Energy Technology Data Exchange (ETDEWEB)

Jouve, A [CEA Centre d` Etudes Nucleaires de Cadarache, 13 -Saint-Paul-lez-Durance (France); [Universite de Provence, 13 - Marseille (France)

1998-12-31

This thesis deals with the radiological consequences of a nuclear accident through the radioactive contamination of the food chain and the subsequent countermeasures for decreasing the fluxes of radionuclides and decontaminating agricultural lands. After a brief summary of the radioprotection ground and context in case of a nuclear accident, this work surveys existing data on the fluxes of radionuclides in soils and from soil to plants. The research work focuses on both the prediction of the fluxes of radionuclides and possible countermeasures: the measurement of the bioavailability of radionuclides in the soil solution, its use in a mathematical expression to quantify the soil-to-plant transfer of caesium and strontium, and the perspectives of an innovative technique of soil decontamination. The obtained results show that based on 4 coefficients, it is possible to predict crop contamination within a 3 % confidence interval: the fluid solid distribution coefficient of radionuclides kd, the amount of chemical analogues of caesium and strontium, i.e. potassium and calcium, respectively, soil pH and a constant characterising the plant species that is concerned. However, it generally appears from soil to plant transfer studies that the reduction of the fluxes of radionuclides is not a promising way of radiological exposure mitigation after a nuclear accident. The work performed shows that it is more efficient to tackle the source of the contamination, i.e. decontaminate the soil. The proposed technique of soil scraping using a turf harvester appears to be the most advantageous among the tested options, for the decontamination of peat-bog meadows. (author).

Review Article : Utilization of Environmental Radiochemistry Techniques for Selection and Evaluation of Nuclear Facility Sites

International Nuclear Information System (INIS)

Atta, E.R.; Madbouly, A.M.; Zakaria, Kh.M.

2016-01-01

This research review puts necessary considerations on the available environmental radiochemistry techniques for selection and evaluation of a nuclear facility sites.The main bjective in site evaluation for nuclear facilities in terms of nuclear safety is to protect the site workers, the public and the environment from the effects of ionizing radiation release from nuclear facilities due to accidents. The extreme sensitivity and speed of radiochemical methods make their applications of considerable importance in several fields and they have found many uses. Information about the existed radioactivity in the different nuclear facilities is an essential requirement for their environmental assessment. It is necessary to estimate the various radioactivity levels in the environment through qualitative and quantitative analytical techniques and to assess the potential effects of the nuclear facility in the region by considering the characteristics of sites.The siting and site evaluation requirements are discussed. Emphasis was given to types of radiochemical techniques used for characterization of the site parameters which determine the potential hazards of the site on the facility and the facility on the site. Emphasis has been also given to the quantitative and qualitative analysis of naturally occurring radionuclides for monitoring and control .There are some techniques employed such as radioactive tracer technique, liquid scintillation technique, gamma spectrometry technique, neutron activation analysis technique, fluorimetric technique and isotope hydrology technique.

Nuclear techniques in coal and chemical industries

International Nuclear Information System (INIS)

Elbern, A.W.; Leal, C.A.

1980-01-01

The use of nuclear techniques for the determination of important parameters in industrial installations is exemplified; advantages of these techniques over other methods conventionally used are pointed out. The use of radiotracers in the study of physical and chemical phenomena occurring in the chemical industry is discussed. It is also shown that, using certain radioisotopes, it is possible to construct devices which enable, for example, the determination of the ash content in coal samples. These devices are economical and easy to be installed for the on-line control during coal transportation. (C.L.B.) [pt

Comparison of different bonding techniques for efficient strain transfer using piezoelectric actuators

Science.gov (United States)

Ziss, Dorian; Martín-Sánchez, Javier; Lettner, Thomas; Halilovic, Alma; Trevisi, Giovanna; Trotta, Rinaldo; Rastelli, Armando; Stangl, Julian

2017-04-01

In this paper, strain transfer efficiencies from a single crystalline piezoelectric lead magnesium niobate-lead titanate substrate to a GaAs semiconductor membrane bonded on top are investigated using state-of-the-art x-ray diffraction (XRD) techniques and finite-element-method (FEM) simulations. Two different bonding techniques are studied, namely, gold-thermo-compression and polymer-based SU8 bonding. Our results show a much higher strain-transfer for the "soft" SU8 bonding in comparison to the "hard" bonding via gold-thermo-compression. A comparison between the XRD results and FEM simulations allows us to explain this unexpected result with the presence of complex interface structures between the different layers.

A Dataset and a Technique for Generalized Nuclear Segmentation for Computational Pathology.

Science.gov (United States)

Kumar, Neeraj; Verma, Ruchika; Sharma, Sanuj; Bhargava, Surabhi; Vahadane, Abhishek; Sethi, Amit

2017-07-01

Nuclear segmentation in digital microscopic tissue images can enable extraction of high-quality features for nuclear morphometrics and other analysis in computational pathology. Conventional image processing techniques, such as Otsu thresholding and watershed segmentation, do not work effectively on challenging cases, such as chromatin-sparse and crowded nuclei. In contrast, machine learning-based segmentation can generalize across various nuclear appearances. However, training machine learning algorithms requires data sets of images, in which a vast number of nuclei have been annotated. Publicly accessible and annotated data sets, along with widely agreed upon metrics to compare techniques, have catalyzed tremendous innovation and progress on other image classification problems, particularly in object recognition. Inspired by their success, we introduce a large publicly accessible data set of hematoxylin and eosin (H&E)-stained tissue images with more than 21000 painstakingly annotated nuclear boundaries, whose quality was validated by a medical doctor. Because our data set is taken from multiple hospitals and includes a diversity of nuclear appearances from several patients, disease states, and organs, techniques trained on it are likely to generalize well and work right out-of-the-box on other H&E-stained images. We also propose a new metric to evaluate nuclear segmentation results that penalizes object- and pixel-level errors in a unified manner, unlike previous metrics that penalize only one type of error. We also propose a segmentation technique based on deep learning that lays a special emphasis on identifying the nuclear boundaries, including those between the touching or overlapping nuclei, and works well on a diverse set of test images.

Analysis of cat oocyte activation methods for the generation of feline disease models by nuclear transfer

Directory of Open Access Journals (Sweden)

Herrick Jason R

2009-12-01

Full Text Available Abstract Background Somatic cell nuclear transfer in cats offers a useful tool for the generation of valuable research models. However, low birth rates after nuclear transfer hamper exploitation of the full potential of the technology. Poor embryo development after activation of the reconstructed oocytes seems to be responsible, at least in part, for the low efficiency. The objective of this study was to characterize the response of cat oocytes to various stimuli in order to fine-tune existing and possibly develop new activation methods for the generation of cat disease models by somatic cell nuclear transfer. Methods First, changes in the intracellular free calcium concentration [Ca2+]i in the oocytes induced by a number of artificial stimuli were characterized. The stimuli included electroporation, ethanol, ionomycin, thimerosal, strontium-chloride and sodium (Na+-free medium. The potential of the most promising treatments (with or without subsequent incubation in the presence of cycloheximide and cytochalasin B to stimulate oocyte activation and support development of the resultant parthenogenetic embryos was then evaluated. Finally, the most effective methods were selected to activate oocytes reconstructed during nuclear transfer with fibroblasts from mucopolysaccharidosis I- and alpha-mannosidosis-affected cats. Results All treatments were able to elicit a [Ca2+]i elevation in the ooplasm with various characteristics. Pronuclear formation and development up to the blastocyst stage was most efficiently triggered by electroporation (60.5 +/- 2.9 and 11.5 +/- 1.7% and the combined thimerosal/DTT treatment (67.7 +/- 1.8 and 10.6 +/- 1.9%; incubation of the stimulated oocytes with cycloheximide and cytochalasin B had a positive effect on embryo development. When these two methods were used to activate oocytes reconstructed during nuclear transfer, up to 84.9% of the reconstructed oocytes cleaved. When the 2 to 4-cell embryos (a total of 220 were

New developments in two-phase flow heat transfer with emphasis on nuclear safety research

International Nuclear Information System (INIS)

Mayinger, F.

1987-01-01

The literature on two-phase flow - with and without heat transfer - shows an explosive-like growth of published papers within the last ten years. Many of these papers were published as a result of nuclear safety research. It is impossible to deal with all new developments reported in this extensive literature. So one has to ask: Are there trends of special interest, where this report could be concentrated on? Looking over the situation, there seem to be three very promising fields of research having high actuality, especially for nuclear safety, namely: fluiddynamic and thermodynamic nonequilibrium in steady state, transient conditions, and scaling. The discussion on new developments in two-phase flow heat transfer, therefore, is limited on these subjects

Concerning the application of the nuclear and related techniques

International Nuclear Information System (INIS)

Desdin Garcia, Luis Felipe

1997-01-01

The present work intends to describe briefly, some of the nuclear and connected techniques of greater application in the conditions of developing countries, which are employed in the Center of Studies Applied to the Nuclear Development, and that can be of interest for the Latin-American countries. Within those techniques we have: radiobiology, that consists of the employment of ionizing radiations to induce mutations oriented to the improvement of the cultivations. It mentions the atmospheric contamination generated by the industry of the exposition to metals and toxic waste, and of mortiferous parasites that adapt quickly to the unhealthy environmental conditions. It also enumerates some advantages of the utilization of instruments based on radioisotopic fountains. (S. Grainger) [es

Molecular methods in nuclear medicine therapy

International Nuclear Information System (INIS)

Lee, Kyung Han

2001-01-01

Nuclear medicine has traditionally contributed to molecular oncology by allowing noninvasive monitoring of tumor metabolism, growth and genetic changes, thereby providing a basis for appropriate biology-based treatment planning. However, NM techniques are now being applied as an active therapeutic tool in novel molecular approaches for cancer treatment. Such areas include research on cancer therapy with radiolabeled ligands or oligonucleotides, and utilization of synergism between NM radiotherapy and gene transfer techniques. Here we will focus on novel aspects of nuclear medicine therapy

Operational safety enhancement of Soviet-designed nuclear reactors via development of nuclear power plant simulators and transfer of related technology

International Nuclear Information System (INIS)

Kohut, P.; Epel, L.G.; Tutu, N.K.

1998-01-01

The US Department of Energy (DOE), under the US government's International Nuclear Safety Program (INSP), is implementing a program of developing and providing simulators for many of the Russian and Ukrainian Nuclear Power Plants (NPPs). Pacific Northwest National Laboratory (PNNL) and Brookhaven National Laboratory (BNL) manage and provide technical oversight of the various INSP simulator projects for DOE. The program also includes a simulator technology transfer process to simulator design organizations in Russia and Ukraine. Training programs, installation of new simulators, and enhancements in existing simulators are viewed as providing a relatively fast and cost-effective technology transfer that will result in measurable improvement in the safety culture and operation of NPPs. A review of this program, its present status, and its accomplishments are provided in this paper

Reliability Assessment of Wind Farm Electrical System Based on a Probability Transfer Technique

Directory of Open Access Journals (Sweden)

Hejun Yang

2018-03-01

Full Text Available The electrical system of a wind farm has a significant influence on the wind farm reliability and electrical energy yield. The disconnect switch installed in an electrical system cannot only improve the operating flexibility, but also enhance the reliability for a wind farm. Therefore, this paper develops a probabilistic transfer technique for integrating the electrical topology structure, the isolation operation of disconnect switch, and stochastic failure of electrical equipment into the reliability assessment of wind farm electrical system. Firstly, as the traditional two-state reliability model of electrical equipment cannot consider the isolation operation, so the paper develops a three-state reliability model to replace the two-state model for incorporating the isolation operation. In addition, a proportion apportion technique is presented to evaluate the state probability. Secondly, this paper develops a probabilistic transfer technique based on the thoughts that through transfer the unreliability of electrical system to the energy transmission interruption of wind turbine generators (WTGs. Finally, some novel indices for describing the reliability of wind farm electrical system are designed, and the variance coefficient of the designed indices is used as a convergence criterion to determine the termination of the assessment process. The proposed technique is applied to the reliability assessment of a wind farm with the different topologies. The simulation results show that the proposed techniques are effective in practical applications.

Nuclear techniques and the disposal of non-radioactive solid wastes

International Nuclear Information System (INIS)

Landsberger, S.; Buchholz, B.

1993-01-01

One of the most vital and persistent public health challenges facing local, state, and national governments is the disposal of solid waste produced from industrial, utility, and municipal sources. There is a growing interest in the monitoring, control, and safe disposal of the chemical constituents arising from these sources. For instance, it is now well known that the release of by products from coal-fired power plants - namely airborne particulates, bottom ash, and fly ash - can have adverse effects on air and water quality. It is therefore important that reliable chemical analytical techniques are readily available to assess the impact of widespread disposal practices of organic and inorganic chemicals. The use of nuclear and nuclear-related analytical techniques - such as neutron activation analysis, energy dispersive x-ray fluorescence and particle induced X-ray emission - have become widespread in major areas of science and technology. These methods and techniques have important applications in such work since they can be used for both the determination of specific individual pollutants (e.g. toxic heavy metals) and multi-elemental analyses for source identification and apportionment purposes. Other nuclear techniques, such as isotope tracers, have also had wide acceptance in characterizing diffusion patterns for metals in soil and aqueous environments and water pollution flows. 1 graph., 1 tab

Application of nuclear techniques in agriculture and medicine: the TRNC experience

International Nuclear Information System (INIS)

Senvar, C.; Korkut, F.C.

2002-01-01

As a small island State in the Eastern corner of the Mediterranean, better known for its potential in academia and tourism, the Turkish Republic of Northern Cyprus (TRNC) is not a country which produces or uses nuclear energy. Nevertheless, in order to safeguard against the biological effects of radiation, the TRNC benefits from nuclear sciences and techniques. In order to ensure the safety of agricultural produce, apart from utilizing nuclear medicine and Co60 (cobalt 60) therapy and similar applications, gamma spectrometric measurements are also undertaken by the State Laboratories which is attached to the Ministry of Health and Social Welfare. Similar techniques are used to measure radioactive content in environmental (sea water, soil, rocks, etc.) samples. All facilities in the TRNC which utilize nuclear agents in the field of medicine, including the X-Ray Screening centers, are subject to control and supervision in accordance with relevant regulations and waste disposal is carried out in cooperation with the Turkish Atomic Energy Authority (TAEK). Just as nuclear techniques can be used for peaceful purposes in such fields as agriculture, control of food-borne diseases, medicine and industry, it can also be abused. In awareness of the global threat of the illicit trafficking of nuclear materials and radioactive sources and given its geo-strategic location at the crossroads of Europe, the Middle East and North Africa, the TRNC has taken all the necessary measures, within the context of combating terrorism, to prevent illicit trafficking as such

Enhancement of nuclear heat transfer in a typical pressurized water reactor by new spacer grids

International Nuclear Information System (INIS)

Nazifi, M.; Nematollahi, M.

2007-01-01

The fuel element geometry typically used in nuclear reactor is rod bundle whose rod-to-rod clearance is maintained by grid spacer. The heat generated in the rod by nuclear reaction is removed by coolant, usually in turbulent flow. The coolant moves axially through the subchannels. Fuel spacer grid affects the coolant flow distribution in a fuel rod bundle, and so spacer geometry has a strong influence on a bundle's thermal-hydraulic characteristics such as critical heat flux and pressure drop. An understanding of the detailed structure of the turbulent flow and heat transfer in the rod bundle, used especially as nuclear fuel elements, is of major interest to the nuclear power industry for their safe and reliable operation. The flow mixing devices on grid spacer would enhance the mixing rate between sub-channels and promote the turbulence in subchannel. The present study evaluates the effects of mixing vane shape on flow structure and heat transfer downstream of mixing vane in a sub-channel of fuel assembly, by obtaining velocity and pressure fields, turbulent intensity, flow mixing factors, heat transfer coefficient and friction factor using three-dimensional RANS analysis. Six new shapes mixing vane designed by the authors, are simulated numerically to evaluate the performance in enhancing the heat transfer, in comparison with commercialized split vane. Standard K-epsilon model are used as a turbulence closure model and periodic and symmetry condition are set as boundary conditions. The capability of the model to predict the coolant flow distribution inside rod bundles is shown and discussed on the base of comparison with experimental data for a variety of geometrical and Reynolds number conditions. It is conformed that the turbulence in the sub-channel was significantly promoted by spacer and mixing devices but rapidly decreased to a fully developed level approximately 10 time of hydraulic diameter downstream of the top of spacer. Ring type mixer showed a high

A Computational Study on the Magnetic Resonance Coupling Technique for Wireless Power Transfer

Directory of Open Access Journals (Sweden)

Zakaria N.A.

2017-01-01

Full Text Available Non-radiative wireless power transfer (WPT system using magnetic resonance coupling (MRC technique has recently been a topic of discussion among researchers. This technique discussed more scenarios in mid-range field of wireless power transmission reflected to the distance and efficiency. The WPT system efficiency varies when the coupling distance between two coils involved changes. This could lead to a decisive issue of high efficient power transfer. This paper presents case studies on the relationship of operating range with the efficiency of the MRC technique. Demonstrative WPT system operates at two different frequencies are projected in order to verify performance. The resonance frequencies used are less than 100MHz within range of 10cm to 20cm.

Design considerations for Mars transfer vehicles using nuclear thermal propulsion

Science.gov (United States)

Emrich, William J.

1995-01-01

The design of a Mars Transfer Vehicle (MTV) utilizing nuclear propulsion will require that careful consideration be given to the nuclear radiation environment in which it will operate. The extremely high neutron and gamma fluxes characteristic of nuclear thermal propulsion systems will cause significant heating of the fluid systems in close proximity to the reactor, especially in the lower propellant tanks. Crew radiation doses are also a concern particularly late in a mission when there is less shielding from the propellant tanks. In this study, various vehicle configuration and shielding strategies were examined and the resulting time dependent radiation fields evaluated. A common cluster of three particle bed reactor (PBR) engines were used in all configurations examined. In general, it appears that long, relatively narrow vehicles perform the best from a radiation standpoint, however, good shield optimization will be critical in maintaining a low radiation environment while minimizing the shield weight penalty.

Monte Carlo techniques in diagnostic and therapeutic nuclear medicine

International Nuclear Information System (INIS)

Zaidi, H.

2002-01-01

Monte Carlo techniques have become one of the most popular tools in different areas of medical radiation physics following the development and subsequent implementation of powerful computing systems for clinical use. In particular, they have been extensively applied to simulate processes involving random behaviour and to quantify physical parameters that are difficult or even impossible to calculate analytically or to determine by experimental measurements. The use of the Monte Carlo method to simulate radiation transport turned out to be the most accurate means of predicting absorbed dose distributions and other quantities of interest in the radiation treatment of cancer patients using either external or radionuclide radiotherapy. The same trend has occurred for the estimation of the absorbed dose in diagnostic procedures using radionuclides. There is broad consensus in accepting that the earliest Monte Carlo calculations in medical radiation physics were made in the area of nuclear medicine, where the technique was used for dosimetry modelling and computations. Formalism and data based on Monte Carlo calculations, developed by the Medical Internal Radiation Dose (MIRD) committee of the Society of Nuclear Medicine, were published in a series of supplements to the Journal of Nuclear Medicine, the first one being released in 1968. Some of these pamphlets made extensive use of Monte Carlo calculations to derive specific absorbed fractions for electron and photon sources uniformly distributed in organs of mathematical phantoms. Interest in Monte Carlo-based dose calculations with β-emitters has been revived with the application of radiolabelled monoclonal antibodies to radioimmunotherapy. As a consequence of this generalized use, many questions are being raised primarily about the need and potential of Monte Carlo techniques, but also about how accurate it really is, what would it take to apply it clinically and make it available widely to the medical physics

Safety prediction technique for nuclear power plants

International Nuclear Information System (INIS)

Henry, C.D. III; Anderson, R.T.

1985-01-01

This paper presents a safety prediction technique (SPT) developed by Reliability Technology Associates (RTA) for nuclear power plants. It is based on a technique applied by RTA to assess the flight safety of US Air Force aircraft. The purpose of SPT is to provide a computerized technique for objective measurement of the effect on nuclear plant safety of component failure or procedural, software, or human error. A quantification is determined, called criticality, which is proportional to the probability that a given component or procedural-human action will cause the plant to operate in a hazardous mode. A hazardous mode is characterized by the fact that there has been a failure/error and the plant, its operating crew, and the public are exposed to danger. Whether the event results in an accident, an incident, or merely the exposure to danger is dependent on the skill and reaction of the operating crew as well as external influences. There are three major uses of SPT: (a) to predict unsafe situations so that corrective action can be taken before accidents occur, (b) to quantify the impact of equipment malfunction or procedural, software, or human error on safety and thereby establish priorities for proposed modifications, and (c) to provide a means of evaluating proposed changes for their impact on safety prior to implementation and to provide a method of tracking implemented changes

Production of human CD59-transgenic pigs by embryonic germ cell nuclear transfer

International Nuclear Information System (INIS)

Ahn, Kwang Sung; Won, Ji Young; Park, Jin-Ki; Sorrell, Alice M.; Heo, Soon Young; Kang, Jee Hyun; Woo, Jae-Seok; Choi, Bong-Hwan; Chang, Won-Kyong; Shim, Hosup

2010-01-01

Research highlights: → Human CD59 (hCD59) gene was introduced into porcine embryonic germ (EG) cells. → hCD59-transgenic EG cells were resistant to hyperacute rejection in cytolytic assay. → hCD59-transgenic pigs were produced by EG cell nuclear transfer. -- Abstract: This study was performed to produce transgenic pigs expressing the human complement regulatory protein CD59 (hCD59) using the nuclear transfer (NT) of embryonic germ (EG) cells, which are undifferentiated stem cells derived from primordial germ cells. Because EG cells can be cultured indefinitely in an undifferentiated state, they may provide an inexhaustible source of nuclear donor cells for NT to produce transgenic pigs. A total of 1980 NT embryos derived from hCD59-transgenic EG cells were transferred to ten recipients, resulting in the birth of fifteen piglets from three pregnancies. Among these offspring, ten were alive without overt health problems. Based on PCR analysis, all fifteen piglets were confirmed as hCD59 transgenic. The expression of the hCD59 transgene in the ten living piglets was verified by RT-PCR. Western analysis showed the expression of the hCD59 protein in four of the ten RT-PCR-positive piglets. These results demonstrate that hCD59-transgenic pigs could effectively be produced by EG cell NT and that such transgenic pigs may be used as organ donors in pig-to-human xenotransplantation.

Production of human CD59-transgenic pigs by embryonic germ cell nuclear transfer

Energy Technology Data Exchange (ETDEWEB)

Ahn, Kwang Sung; Won, Ji Young [Department of Physiology, Dankook University School of Medicine, Cheonan (Korea, Republic of); Park, Jin-Ki [Animal Biotechnology Division, National Institute of Animal Science, Suwon (Korea, Republic of); Sorrell, Alice M. [Department of Physiology, Dankook University School of Medicine, Cheonan (Korea, Republic of); Heo, Soon Young; Kang, Jee Hyun [Department of Nanobiomedical Science, Dankook University, Cheonan (Korea, Republic of); Woo, Jae-Seok [Animal Biotechnology Division, National Institute of Animal Science, Suwon (Korea, Republic of); Choi, Bong-Hwan [Genomics and Bioinformatics Division, National Institute of Animal Science, Suwon (Korea, Republic of); Chang, Won-Kyong [Animal Biotechnology Division, National Institute of Animal Science, Suwon (Korea, Republic of); Shim, Hosup, E-mail: shim@dku.edu [Department of Nanobiomedical Science, Dankook University, Cheonan (Korea, Republic of); Institute of Tissue Regeneration Engineering, Dankook University, Cheonan (Korea, Republic of)

2010-10-01

Research highlights: {yields} Human CD59 (hCD59) gene was introduced into porcine embryonic germ (EG) cells. {yields} hCD59-transgenic EG cells were resistant to hyperacute rejection in cytolytic assay. {yields} hCD59-transgenic pigs were produced by EG cell nuclear transfer. -- Abstract: This study was performed to produce transgenic pigs expressing the human complement regulatory protein CD59 (hCD59) using the nuclear transfer (NT) of embryonic germ (EG) cells, which are undifferentiated stem cells derived from primordial germ cells. Because EG cells can be cultured indefinitely in an undifferentiated state, they may provide an inexhaustible source of nuclear donor cells for NT to produce transgenic pigs. A total of 1980 NT embryos derived from hCD59-transgenic EG cells were transferred to ten recipients, resulting in the birth of fifteen piglets from three pregnancies. Among these offspring, ten were alive without overt health problems. Based on PCR analysis, all fifteen piglets were confirmed as hCD59 transgenic. The expression of the hCD59 transgene in the ten living piglets was verified by RT-PCR. Western analysis showed the expression of the hCD59 protein in four of the ten RT-PCR-positive piglets. These results demonstrate that hCD59-transgenic pigs could effectively be produced by EG cell NT and that such transgenic pigs may be used as organ donors in pig-to-human xenotransplantation.

Utilization of analytical techniques in aid the implantation of nuclear installations

International Nuclear Information System (INIS)

Ferreira, M.P.; Sabino, C.V.S.; Avelar, M.M.

1984-01-01

Nuclear, physico-chemical and classic techniques developed and utilized by Centro de Desenvolvimento de Tecnicas Nucleares are presented, as back up to the implementation and operation of nuclear installations related with several parts of fuel cycle from uranium prospecting to waste treatment samples of soils, ores, alloys, plastics, paints, biological materials, air and water were analysed. (M.C.K) [pt

Technical meeting on commercial applications of nuclear analytical techniques. Meeting report

International Nuclear Information System (INIS)

2004-01-01

This report summarizes the findings of the Technical Meeting on the Commercial Applications of Nuclear Analytical Techniques held in Vienna on 23-26 November 2004, where an assessment was initiated of the world capacity and market potentials for neutron activation analysis and nuclear spectroscopy, including an estimation of economic revenues. Industry and governmental agencies were identified as stakeholders for these laboratories. Examples are given of potential benefits of these techniques to the stakeholders. The potentials for commercial applications of neutron activation analysis and nuclear spectroscopy (measurement of alpha, beta and gamma ray emitting radionuclides) are addressed. First estimates are given of the worldwide capacity of these laboratories, suggestions and examples are given for potential markets and the typical organizational and technical constraints are discussed. Two case studies of commercial neutron activation analysis laboratories at a small and a medium-size reactor are given in the 'individual contributions' section of this document. An assessment of other nuclear analytical techniques such as X ray Fluorescence Spectrometry, Particle Induced X ray Emission Spectrometry or Ion Beam Analysis Spectrometry has been completed after a comprehensive collection of background information

Technical meeting on commercial applications of nuclear analytical techniques. Meeting report

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This report summarizes the findings of the Technical Meeting on the Commercial Applications of Nuclear Analytical Techniques held in Vienna on 23-26 November 2004, where an assessment was initiated of the world capacity and market potentials for neutron activation analysis and nuclear spectroscopy, including an estimation of economic revenues. Industry and governmental agencies were identified as stakeholders for these laboratories. Examples are given of potential benefits of these techniques to the stakeholders. The potentials for commercial applications of neutron activation analysis and nuclear spectroscopy (measurement of alpha, beta and gamma ray emitting radionuclides) are addressed. First estimates are given of the worldwide capacity of these laboratories, suggestions and examples are given for potential markets and the typical organizational and technical constraints are discussed. Two case studies of commercial neutron activation analysis laboratories at a small and a medium-size reactor are given in the 'individual contributions' section of this document. An assessment of other nuclear analytical techniques such as X ray Fluorescence Spectrometry, Particle Induced X ray Emission Spectrometry or Ion Beam Analysis Spectrometry has been completed after a comprehensive collection of background information.

Agreement between the Government of Australia and the Government of the Republic of the Philippines concerning co-operation in peaceful uses of nuclear energy and the transfer of nuclear material

International Nuclear Information System (INIS)

1983-01-01

Australia and the Philippines, both parties to the Treaty on the Non-Proliferation of Nuclear Weapons, have agreed to cooperate in the peaceful uses of nuclear energy, including research and training, exchange of unclassified information, and projects of mutual interest. The agreement applies to all nuclear material transferred for peaceful purposes between the two countries and to material derived from that transferred material. The treaty entered into force on the 11th May 1982

Polymer Light-Emitting Diode Prepared by Floating-Off Film-Transfer Technique

KAUST Repository

Park, Jihoon; Kim, Eugene

2015-01-01

© 2015 Copyright Taylor & Francis Group, LLC. Floating-off film-transfer technique was used for the formation of semiconducting polymer multi-layers and the effect on the performance of polymer light-emitting diode (PLED) was studied. This method

Role of ooplasm in nuclear and nucleolar remodeling of intergeneric somatic cell nuclear transfer embryos during the first cell cycle

DEFF Research Database (Denmark)

Østrup, Olga; Strejcek, Frantisek; Petrovicova, Ida

2011-01-01

Initially, development of the zygote is under control of the oocyte ooplasm. However, it is presently unknown if and to what extent is the ooplasm able to interact with a transferred somatic cell from another species in the context of interspecies somatic cell nuclear transfer (SCNT). Here, one-c...... in sequence-specific interactions between the ooplasm and chromatin of another genus. In conclusion, the results demonstrate a possible reason why the intergeneric SCNT embryos never reached the full term....

Data retrieval techniques for nuclear power plants

International Nuclear Information System (INIS)

Sozzi, G.L.; Dahl, C.C.; Gross, R.S.; Voeller, J.G. III

1995-01-01

Data retrieval, processing retrieved data, and maintaining the plant documentation system to reflect the as-built condition of the plant are challenging tasks for most existing nuclear facilities. The information management systems available when these facilities were designed and constructed are archaic by today's standards. Today's plant documentation systems generally include hard copy drawings and text, drawings in various CAD formats, handwritten information, and incompatible databases. These existing plant documentation systems perpetuate inefficiency for the plant technical staff in the performance of their daily activities. This paper discusses data retrieval techniques and tools available to nuclear facilities to minimize the impacts of the existing plant documentation system on plant technical staff productivity

Optimizing Nuclear Reactor Operation Using Soft Computing Techniques

NARCIS (Netherlands)

Entzinger, J.O.; Ruan, D.; Kahraman, Cengiz

2006-01-01

The strict safety regulations for nuclear reactor control make it di±cult to implement new control techniques such as fuzzy logic control (FLC). FLC however, can provide very desirable advantages over classical control, like robustness, adaptation and the capability to include human experience into

Application of nuclear techniques in improving agricultural productivity with particular reference to pasture management

International Nuclear Information System (INIS)

Majid Ajorlo; Ramdzani Abdullah

2009-01-01

Nuclear techniques are appropriate tools to settle problems for agriculture or natural resources which cannot be solved using conventional agricultural techniques. In this paper, the research activities carried out and the achievements so far obtained in the agricultural specialties -all by using nuclear techniques- with particular reference to pasture management are discussed. Insect pest control by Sterile Insect Techniques (SIT); soil and water management using neutron moisture probes; determining N-fixation capacity of legumes using N-15 isotope and nuclear methods; soil erosion measurement using of fallout radionuclide such as Cs-137; monitoring the movement of saline water in salt-affected land using isotopes of chlorine; livestock production and health by RIA and ELISA are some of achievements so far obtained in improving agricultural productivity. The ultimate goal of the nuclear technique investigation in agriculture is to use the resources efficiently in obtaining higher plant and livestock yields while increasing the quality and protecting them against insects, diseases and weeds. (Author)

Rabbit embryonic stem cell lines derived from fertilized, parthenogenetic or somatic cell nuclear transfer embryos

International Nuclear Information System (INIS)

Fang, Zhen F.; Gai, Hui; Huang, You Z.; Li, Shan G.; Chen, Xue J.; Shi, Jian J.; Wu, Li; Liu, Ailian; Xu, Ping; Sheng, Hui Z.

2006-01-01

Embryonic stem cells were isolated from rabbit blastocysts derived from fertilization (conventional rbES cells), parthenogenesis (pES cells) and nuclear transfer (ntES cells), and propagated in a serum-free culture system. Rabbit ES (rbES) cells proliferated for a prolonged time in an undifferentiated state and maintained a normal karyotype. These cells grew in a monolayer with a high nuclear/cytoplasm ratio and contained a high level of alkaline phosphate activity. In addition, rbES cells expressed the pluripotent marker Oct-4, as well as EBAF2, FGF4, TDGF1, but not antigens recognized by antibodies against SSEA-1, SSEA-3, SSEA-4, TRA-1-10 and TRA-1-81. All 3 types of ES cells formed embryoid bodies and generated teratoma that contained tissue types of all three germ layers. rbES cells exhibited a high cloning efficiency, were genetically modified readily and were used as nuclear donors to generate a viable rabbit through somatic cell nuclear transfer. In combination with genetic engineering, the ES cell technology should facilitate the creation of new rabbit lines

Cuban advances in the application of nuclear techniques in petroleum prospection

International Nuclear Information System (INIS)

Rodriguez Martinez, Norma; Montero Cabrera, Maria Elena

1997-01-01

Accumulated experience demonstrates how effective is the utilization of nuclear techniques in oil prospection. Until a little while ago the national geophysical service had a wide complex of nuclear and radioactive methods that were including: Methods Neutron compensated Gamma Density Cabotage Gamma and Natural Gamma for evaluating the properties of capacity and filtration of the hydrocarbons reservoirs. Neutronic Impulses Generating Method for determining and specifying the water-oil contact zone within the hydrocarbon deposits, radioactive tracers for: 1- detecting breakdowns in the coating pipeline of the wells, 2- for determining zones of losses of circulation of the fluid in the wells; Furthermore in laboratory conditions are used other nuclear analytical techniques: Neutron Activation Analysis, X-Ray Fluorescence, gamma spectrometry to determine multielemental composition of rocks including the traces elements. The determination, have permitted us to characterize each one of the sequences and they are used as a criterion for their stratigraphic differentiation at the same time, they are techniques-considering their affectation to neutronic methods

Transferring knowledge and know-how from the nuclear power community to the research reactor community

International Nuclear Information System (INIS)

Wijtsma, F.J.

2002-01-01

Question What is the best way of transferring knowledge and know-how from the nuclear power community to the research reactor community, e.g. in the fields of quality assurance, safety culture, etc.? To answer the question on how to transfer knowledge and know-how from the nuclear power community to the research reactor community, one should first try to establish what are the differences and similarities between these types of nuclear facilities. Despite the big difference between the primary objectives of these two kinds of facilities, i.e. electricity production versus providing irradiation services, the underlying safety culture should be comparable. For historical reasons, nuclear power plant management took the lead in establishing fully accepted safety standards. However, research reactors can avail themselves of the wide body of nuclear safety experience accumulated at nuclear power plants. This should be applicable to all nuclear facilities. Nonetheless, in transferring their know-how, safety specialists should take into account the huge differences between critical assemblies, university reactors, small research reactors and multi-purpose high power research reactors. The goal to which a specific facility is dedicated bears heavily upon the outlook of its management Question: How can well run research reactors help problem research reactors? To answer this, a basic question should in turn be posed: Should one help a research reactor with operational difficulties? And, if so, to what extent? Who will benefit? Within the framework of this meeting, one should concentrate on nuclear safety, which is determined by: Safety culture (including quality assurance); The level of training of all staff; Ageing (installation, staff and documentation); The front/back end of the fuel cycle; A strong programme versus extended shutdown; Regulatory (nuclear regulatory) inspectorates; National (international) co-operation; The financial situation prevailing at the

Development of programming techniques for behaviors of nuclear robot in real environment

International Nuclear Information System (INIS)

Tsukune, Hideo; Ogasawara, Tsukasa; Hirukawa, Hirohisa; Kitagaki, Kosei; Onda, Hiromu; Nakamura, Akira

1999-01-01

This study aims at establishment of synthetic autonomous technique on nuclear robot for a basic technique to realize remote control and automation of works in a nuclear plant by means of development on action programming function under actual environment. Before 1997 fiscal year, development of manipulation description system due to contact state transition series, development of mechanical assembly work instruction system using contact actuating system, development of new manipulator system with excellent controllability, development of quasi contact point monitoring method, and development of environmental model construction method using range finder and instruction tree, had been conducted. In 1997 fiscal year, probability of nuclear robot, on synthetic autonomous technique was shown by synthesis of many results on action programming planning function into a prototype system under an actual environment obtained by those developments. (G.K.)

Analysis of Defective Pipings in Nuclear Power Plants and Applications of Guided Ultrasonic Wave Techniques

International Nuclear Information System (INIS)

Koo, Dae Seo; Cheong, Yong Moo; Jung, Hyun Kyu; Park, Chi Seung; Park, Jae Suck; Choi, H. R.; Jung, S. S.

2006-07-01

In order to apply the guided ultrasonic techniques to the pipes in nuclear power plants, the cases of defective pipes of nuclear power plants, were investigated. It was confirmed that geometric factors of pipes, such as location, shape, and allowable space were impertinent for the application of guided ultrasonic techniques to pipes of nuclear power plants. The quality of pipes, supports, signals analysis of weldment/defects, acquisition of accurate defects signals also make difficult to apply the guided ultrasonic techniques to pipes of nuclear power plants. Thus, a piping mock-up representing the pipes in the nuclear power plants were designed and fabricated. The artificial flaws will be fabricated on the piping mock-up. The signals of guided ultrasonic waves from the artificial flaws will be analyzed. The guided ultrasonic techniques will be applied to the inspection of pipes of nuclear power plants according to the basis of signals analysis of artificial flaws in the piping mock-up

Nucleolar remodeling in nuclear transfer embryos

DEFF Research Database (Denmark)

Laurincik, Jozef; Maddox-Hyttel, Poul

2007-01-01

Transcription of the ribosomal RNA (rRNA) genes occurs in the nucleolus and results in ribosome biogenesis. The rRNA gene activation and the associated nucleolus formation may be used as a marker for the activation of the embryonic genome in mammalian embryos and, thus serve to evaluate the devel......Transcription of the ribosomal RNA (rRNA) genes occurs in the nucleolus and results in ribosome biogenesis. The rRNA gene activation and the associated nucleolus formation may be used as a marker for the activation of the embryonic genome in mammalian embryos and, thus serve to evaluate...... nucleoli are not apparent until the 5th cell cycle, whereas in somatic cell nuclear transfer embryos the functional nucleoli emerge already during the 3rd cell cycle. Intergeneric reconstructed embryos produced by the fusion of bovine differentiated somatic cell to a nonactivated ovine cytoplast fail...

Nonlinear analysis techniques of block masonry walls in nuclear power plants

International Nuclear Information System (INIS)

Hamid, A.A.; Harris, H.G.

1986-01-01

Concrete masonry walls have been used extensively in nuclear power plants as non-load bearing partitions serving as pipe supports, fire walls, radiation shielding barriers, and similar heavy construction separations. When subjected to earthquake loads, these walls should maintain their structural integrity. However, some of the walls do not meet design requirements based on working stress allowables. Consequently, utilities have used non-linear analysis techniques, such as the arching theory and the energy balance technique, to qualify such walls. This paper presents a critical review of the applicability of non-linear analysis techniques for both unreinforced and reinforced block masonry walls under seismic loading. These techniques are critically assessed in light of the performance of walls from limited available test data. It is concluded that additional test data are needed to justify the use of nonlinear analysis techniques to qualify block walls in nuclear power plants. (orig.)

Apparatus for transferring nuclear fuel pellets to a plate loader

International Nuclear Information System (INIS)

Huggins, T.B.

1978-01-01

An apparatus is described for transferring nuclear fuel pellets from a grinding machine to a plate loader. It includes a frame, an endless belt fitted to the frame, a control system provided on it for actuating the belt at a preset speed, a V shaped vessel fitted directly above the belt and extending along its length to guide the pellets on the belt and a device to receive the pellets coming from the belt [fr

Application of the neutron noise analysis technique in nuclear power plants

International Nuclear Information System (INIS)

Lescano, Victor H.; Wentzeis, Luis M.

1999-01-01

Using the neutron noise analysis in nuclear power plants, and without producing any perturbation in the normal operation of the plant, information of the vibration state of the reactor internals and the behavior of the operating conditions of the reactor primary circuit can be obtained. In Argentina, the neutron noise analysis technique is applied in customary way in the nuclear power plants Atucha I and Embalse. A database was constructed and vibration frequencies corresponding to different reactor internals were characterized. Reactor internals with particular mechanical vibrations have been detected and localized. In the framing of a cooperation project between Argentina and Germany, we participated in the measurements, analysis and modelisation, using the neutron noise technique, in the Obrigheim and Gundremmingen nuclear power plants. In the nuclear power plant Obrigheim (PWR, 350 M We), correlations between the signals measured from self-power neutron detectors and accelerometers located inside the reactor core, were made. In the nuclear power plant Gundremmingen (BWR, 1200 M We) we participated in the study of a particular mechanical vibration detected in one of the instrumentation tube. (author)

Application condition of optical communication technique in the nuclear power plants

International Nuclear Information System (INIS)

Sakurai, Jun

1999-01-01

As the optical communication technique can process rapidly a lot of information and exclude perfectly error action due to noise, it is adopted gradually to commercial and company communications (containing operational managements in large scale facilities) in worldwide scale in stead of conventional communication technique (containing operational controls and measurements). In application to the nuclear power plants, as forming not only change in properties but also deterioration due to radiation damage in many cases of exposure to various types of radiations such as neutron, gamma-ray, and so forth in difference with conventional using environment, its using range is limited at present. In future, development of optical fibers or elements with excellent high temperature and radiation resistances usable stably at reactor core for a long time is essential. The regular application of the optical communication technique at the nuclear power plants begins just now, which is an expected field for future large development. And, for the old nuclear power plant in present operation, substitution to the optical communication technique in accompany with replace of appliances at periodical inspections will also be conducted. Its response is already required rapidly in the Tokyo Electric Power Co., Ltd.. (G.K.)

Evaluation of biolistic gene transfer methods in vivo using non-invasive bioluminescent imaging techniques

Directory of Open Access Journals (Sweden)

Daniell Henry

2011-06-01

Full Text Available Abstract Background Gene therapy continues to hold great potential for treating many different types of disease and dysfunction. Safe and efficient techniques for gene transfer and expression in vivo are needed to enable gene therapeutic strategies to be effective in patients. Currently, the most commonly used methods employ replication-defective viral vectors for gene transfer, while physical gene transfer methods such as biolistic-mediated ("gene-gun" delivery to target tissues have not been as extensively explored. In the present study, we evaluated the efficacy of biolistic gene transfer techniques in vivo using non-invasive bioluminescent imaging (BLI methods. Results Plasmid DNA carrying the firefly luciferase (LUC reporter gene under the control of the human Cytomegalovirus (CMV promoter/enhancer was transfected into mouse skin and liver using biolistic methods. The plasmids were coupled to gold microspheres (1 μm diameter using different DNA Loading Ratios (DLRs, and "shot" into target tissues using a helium-driven gene gun. The optimal DLR was found to be in the range of 4-10. Bioluminescence was measured using an In Vivo Imaging System (IVIS-50 at various time-points following transfer. Biolistic gene transfer to mouse skin produced peak reporter gene expression one day after transfer. Expression remained detectable through four days, but declined to undetectable levels by six days following gene transfer. Maximum depth of tissue penetration following biolistic transfer to abdominal skin was 200-300 μm. Similarly, biolistic gene transfer to mouse liver in vivo also produced peak early expression followed by a decline over time. In contrast to skin, however, liver expression of the reporter gene was relatively stable 4-8 days post-biolistic gene transfer, and remained detectable for nearly two weeks. Conclusions The use of bioluminescence imaging techniques enabled efficient evaluation of reporter gene expression in vivo. Our results

Transference of know-how for the fabrication of heavy components for nuclear power reactors

International Nuclear Information System (INIS)

Meier, F.

1977-01-01

1) Heavy components for nuclear power reactors. Reactor pressure vessels with total weight of 540 tons; steam generators: heat exchangers with U-type tube bundles, total weight 420 tons. 2) Choice of know-how recipient. Technical criteria, i.e. manufacturing facilities, existing quality assurance system, location of the workshops, possibilities for training, infrastructures. 3. Measures for transferring know-how to a newly established company. Planning and erection of the factory: organisational set up of the company; personnel selection and training; transfer of documentation; transfer of know-how that cannot be transferred in a written form. 4) Contracts for assuring the transfer of know-how. Stipulation of mutual rights and obligations of the know-how owner and receiver in individual contracts: engineering services contract, technical information contract, personnel training contract, license contract. (orig.) [de

Regional Cooperation Agreement for Asia and the Pacific (RCA). A mechanism for nuclear technology transfer

International Nuclear Information System (INIS)

Bin Muslim, N.

1993-01-01

The paper presents the regional cooperation programs of the IAEA which have as purpose to promote the applications of peaceful uses of atomic energy and to transfer technology to the developing countries. The paper focusses on the (RCA) program for Asia and the Pacific, it is considered the most important mechanism for genuine technology transfer. The annex no 1 lists the full text of the Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology, 1987 (13 articles). The annex no.3 lists also the full text of the African Regional Cooperative Agreement for Research, Development and training Related to Nuclear Science and Technology (14 articles). 11 refs., 17 tabs

Applied research on air pollution using nuclear-related analytical techniques

International Nuclear Information System (INIS)

1994-01-01

A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which will run from 1992-1996, and will build upon the experience gained by the Agency from the laboratory support that it has been providing for several years to BAPMoN - the Background Air Pollution Monitoring Network programme organized under the auspices of the World Meterological Organization. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XFR, and PIXE for the analysis of toxic and other trace elements in suspended particulate matter (including air filter samples), rainwater and fog-water samples, and in biological indicators of air pollution (e.g. lichens and mosses). The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for practically-oriented research and monitoring studies on air pollution ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural areas). This document reports the discussions held during the first Research Co-ordination Meeting (RCM) for the CRP which took place at the IAEA Headquarters in Vienna. Refs, figs and tabs

Status and development of nuclear techniques for commercial application in Sichuan

Energy Technology Data Exchange (ETDEWEB)

Chen Hao; Pan Pingchuan; Chen Zhuping; Zhu Yun; Chao Xiaochuan [Sichuan Province Institute of Nuclear Technology Application, Chengdu, Sichuan (China)

2001-03-01

This article presents information on fields of radiation techniques in Sichuan and their potential development in future. Sichuan is one of biggest provinces and is a center of economy and art in the southwest of China. Research of nuclear technology began from 1960. The studies at the beginning had focused on agriculture, radiation chemistry industry and radiation medicine. Over the past 30 years, nuclear techniques are used in a wide range of applications, from food preservation to crosslinking. They play an increasingly valuable and often unique role in Sichuan economy. (J.P.N.)

Status and development of nuclear techniques for commercial application in Sichuan

International Nuclear Information System (INIS)

Chen Hao; Pan Pingchuan; Chen Zhuping; Zhu Yun; Chao Xiaochuan

2001-01-01

This article presents information on fields of radiation techniques in Sichuan and their potential development in future. Sichuan is one of biggest provinces and is a center of economy and art in the southwest of China. Research of nuclear technology began from 1960. The studies at the beginning had focused on agriculture, radiation chemistry industry and radiation medicine. Over the past 30 years, nuclear techniques are used in a wide range of applications, from food preservation to crosslinking. They play an increasingly valuable and often unique role in Sichuan economy. (J.P.N.)

Measurement of the amplitude and phase transfer functions of an optical modulator using a heterodyne technique

DEFF Research Database (Denmark)

Romstad, Francis Pascal; Birkedal, Dan; Mørk, Jesper

2001-01-01

We present a new technique that measures the full amplitude and phase transfer curves of the modulator as a function of the applied bias, from which the small signal α-parameter can be calculated. The technique measures the amplitude and phase transfer functions simultaneously and directly......, compared to techniques where a time-consuming data analysis is necessary to calculate the a-parameter and an additional measurement is necessary to estimate the phase. Additionally, the chirp profile for all operation points can be calculated....

Nuclear Analytical Techniques for Commercial Applications in China

International Nuclear Information System (INIS)

Chai, Z.; Zhang, Z.; Feng, S.; Yang, J.; Ouyang, H.; Feng, X.; Mao, X.

2013-01-01

Since the establishment of the first Chinese nuclear reactor and accelerator in 1958, the nuclear analytical techniques (NATs) in China have dramatically developed in past half century. Nowadays 10 research nuclear reactors and over 100 small accelerators are available in China. Roughly, about 50 % of the machine time is applied for commercial purpose at the moment. The versatile nuclear analytical methods, mainly NAA, PIXE, XRF, etc., in China have been and are being applied widely and extensively in the following three fields: scientific, training, and commercial. This paper will briefly describe the past experience and present status about NATs for commercial applications. Some practical examples to demonstrate the role of NATs in this aspect will be given as well. Basically, the NATs used for the commercial applications in China can be divided into two types, i.e. off-line and on-line. The former mainly includes instrumental neutron activation analysis (INAA) for compositional determination, particle induced X-ray emission (PIXE) also for compositional analysis, accelerator-based mass-spectrometry (AMS) for analysis of C-14, Be-7, Cl-36 and other long-lived radioactive nuclides, solid state nuclear track detector

An experimental investigation of heat transfer enhancement in minichannel: Combination of nanofluid and micro fin structure techniques

DEFF Research Database (Denmark)

Zhang, Ji; Diao, Yanhua; Zhao, Yaohua

2017-01-01

This work experimentally studied the single-phase heat transfer and pressure drop characteristics by using two heat transfer enhancement techniques (micro fin structure and nanofluids) in multiport minichannel flat tube (MMFT). MMFT consisted of numerous parallel rectangular minichannels...... and is widely used in industry as the heat transfer unit of a heat exchanger. Firstly, the enhanced heat transfer performances by individually using one enhancement technique were investigated by testing Nusselt number, friction factor and performance evaluation criterion (PEC). In this section, five MMFTs...... with different micro fin numbers (N = 0, 1, 2, 3 and 4) and nanofluids with three volume concentrations (φ = 0.005%, 0.01% and 0.1%) were used as test sections and working fluids respectively. Secondly, the experiments using two combined enhancement technique were performed. By using conjunctively two...

Radioactive droplet moisture transfer from nuclear power plant spray pool

International Nuclear Information System (INIS)

Elokhin, A.P.

1995-01-01

Problem on transfer of radioactive droplet moisture with an account of its evaporation from the nuclear power plant spray pool (NPP coolant) is considered. Formulae enabling evaluation of droplet and radioactive water admixture lifetime as a whole, as well as the maximum distance (by wind), over which it can extend, are obtained. Recommendations for decrease in the droplet dispersed composition and reduction in scale of radioactive contamination of underlying surface are given. 10 refs.; 3 figs.; 1 tab

Nuclear-derived techniques improve cattle productivity and milk quality in Cameroon

International Nuclear Information System (INIS)

Dixit, Aabha

2016-01-01

Increasing agricultural production and improving the quality of milk and meat are key to combating poverty and increasing food security in Africa. Countries such as Cameroon are increasingly turning to innovative, nuclear and nuclear-derived techniques to control and prevent diseases among livestock, and boost cattle and milk production.

The International Stripa Project: Technology transfer from cooperation in scientific and technological research on nuclear waste disposal

International Nuclear Information System (INIS)

Levich, R.A.; Ferrigan, P.M.; Wilkey, P.L.

1990-01-01

The Nuclear Energy Agency of the organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The objectives of the Stripa Project are to develop techniques for characterizing sites located deep in rock formations that are potentially suitable for the geologic disposal of high-level radioactive wastes and to evaluate particular engineering design considerations that could enhance the long-term safety of a high-level radioactive waste repository in a geologic medium. The purpose of this paper is to briefly summarize the research conducted at Stripa and discuss the ways in which the technology developed for the Stripa Project has been and will be transfered to the United States Civilian Radioactive Waste Management Program's Yucca Mountain Project. 3 refs., 2 figs

Why a criminal ban? Analyzing the arguments against somatic cell nuclear transfer in the Canadian parliamentary debate.

Science.gov (United States)

Caulfield, Timothy; Bubela, Tania

2007-02-01

Somatic cell nuclear transfer (SCNT) remains a controversial technique, one that has elicited a variety of regulatory responses throughout the world. On March 29, 2005, Canada's Assisted Human Reproduction Act came into force. This law prohibits a number of research activities, including SCNT. Given the pluralistic nature of Canadian society, the creation of this law stands as an interesting case study of the policy-making process and how and why a liberal democracy ends up making the relatively rare decision to use a statutory prohibition, backed by severe penalties, to stop a particular scientific activity. In this article, we provide a comprehensive and systematic legal analysis of the legislative process and parliamentary debates associated with the passage of this law.

Knowledge management for sustainable applications of nuclear techniques in Ethiopia: Case study

International Nuclear Information System (INIS)

Belete, Z.

2004-01-01

Full text: Ethiopia is benefiting from applications of nuclear related technologies in agriculture, livestock, water and energy resource assessment, etc. Nuclear techniques are playing a major role in the health sector in terms of diagnosis and therapeutic applications. Cancer is a major cause of death in industrialized countries, and the number of cases in developing countries like Ethiopia is also growing rapidly. Ethiopia according to WHO estimates had over 52,000 patients newly diagnosed with cancer in the year 2000. In the year 2015, this number is projected to increase to over 83,000. The International Atomic Energy Agency (IAEA), through its technical cooperation program supported the establishment of Radiation Therapy Centre at the premises of Black Lion Hospital. The Centre stated work in 1977 with one medical Physicist, three therapy radiographers, and one radiation oncologist. Currently the Radiotherapy Centre is facing a number of constraints among which shortage of trained staff is the major one. The Centre has a capacity to give inpatient services for 20 patients. However, it is giving only outpatient service (limited to 700 patients per annum) due to shortage of trained manpower in the field. Moreover, brachytherapy, the treatment planning, and the mould room equipment are not utilized at all, while the teletherapy and other equipment are under utilised. Cancer patients awaiting treatment services are increasing from time to time (40,000 -50,000). Occurrence of death due to lack of access to medication is therefore becoming high. Noting this, the Agency provided fellowships and training courses on applications of nuclear techniques for diagnostic and therapeutic purposes in the treatment of cancer to limited staff members of the Radiotherapy Centre. In spite of the effort made by the Agency to train personnel in therapeutic applications of nuclear techniques, the number of trained staff remains low. This in turn affects the sustainable application of

Knowledge management for sustainable applications of nuclear techniques in Ethiopia: Case study

International Nuclear Information System (INIS)

Belete, Z.

2004-01-01

Full text: Ethiopia is benefiting from applications of nuclear related technologies in agriculture, livestock, water and energy resource assessment, etc. Nuclear techniques are playing a major role in the health sector in terms of diagnosis and therapeutic applications. Cancer is a major cause of death in industrialized countries, and the number of cases in developing countries like Ethiopia is also growing rapidly. Ethiopia according to WHO estimates had over 52,000 patients newly diagnosed with cancer in the year 2000. In the year 2015, this number is projected to increase to over 83,000. The International Atomic Energy Agency (IAEA), through its technical cooperation program supported the establishment of Radiation Therapy Centre at the premises of Black Lion Hospital. The Centre stated work in 1977 with one medical Physicist, three therapy radiographers, and one radiation oncologist. Currently the Radiotherapy Centre is facing a number of constraints among which shortage of trained staff is the major one. The Centre has a capacity to give inpatient services for 20 patients. However, it is giving only outpatient service (limited to 700 patients per annum) due to shortage of trained manpower in the field. Moreover, brachytherapy, the treatment planning, and the mould room equipment are not utilized at all, while the teletherapy and other equipment are under utilised. Cancer patients awaiting treatment services are increasing from time to time (40,000 - 50,000). Occurrence of death due to lack of access to medication is therefore becoming high. Noting this, the Agency provided fellowships and training courses on applications of nuclear techniques for diagnostic and therapeutic purposes in the treatment of cancer to limited staff members of the Radiotherapy Centre. In spite of the effort made by the Agency to train personnel in therapeutic applications of nuclear techniques, the number of trained staff remains low. This in turn affects the sustainable application

Research on transfer rule of the monitoring of operator in digital main control room of nuclear power plant

International Nuclear Information System (INIS)

Zhang Li; Li Linfeng; Li Pengcheng; Lu Changshen; Huang Weigang; Dai Zhonghua; Huang Yuanzheng; Chen Qingqing

2013-01-01

In the digital main control room of nuclear power plants, monitoring the operating status of the system of reactor is not only one of the most important tasks of the operators, but also the basis and premise of controlling the system of reactor running correctly. After analyzing, inducing, summarizing the data obtained, we found the operators' monitor behavior could be classified as procedure transfer, abnormal transfer, and exchange transfer. The times of exchange transfer is 29% of the total transfer times, abnormal transfer is 14%, regulation transfer is 36%, and others are 21%. (authors)

Three-Dimensional Reconstruction of Nuclear Envelope Architecture Using Dual-Color Metal-Induced Energy Transfer Imaging.

Science.gov (United States)

Chizhik, Anna M; Ruhlandt, Daja; Pfaff, Janine; Karedla, Narain; Chizhik, Alexey I; Gregor, Ingo; Kehlenbach, Ralph H; Enderlein, Jörg

2017-12-26

The nuclear envelope, comprising the inner and the outer nuclear membrane, separates the nucleus from the cytoplasm and plays a key role in cellular functions. Nuclear pore complexes (NPCs), which are embedded in the nuclear envelope, control transport of macromolecules between the two compartments. Here, using dual-color metal-induced energy transfer (MIET), we determine the axial distance between Lap2β and Nup358 as markers for the inner nuclear membrane and the cytoplasmic side of the NPC, respectively. Using MIET imaging, we reconstruct the 3D profile of the nuclear envelope over the whole basal area, with an axial resolution of a few nanometers. This result demonstrates that optical microscopy can achieve nanometer axial resolution in biological samples and without recourse to complex interferometric approaches.

The radiological safety in the use of nuclear technique -activities developed by Centro de Desenvolvimento da Tecnologia Nuclear - CNEN

International Nuclear Information System (INIS)

Wakabayashi, T.; Pereira, E.G.; Hirayama, T.

1991-01-01

The activities developed by the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN supporting the users of nuclear techniques are described. The methodology used and future plans for the group are shown. (E.G.)

Application Of Nuclear Techniques In Environmental Studies And Pollution Control

Energy Technology Data Exchange (ETDEWEB)

EI-Motaium, R A [Plant Research Department, Nuclear Research Ceter, Atomic Energy Authority, Inshas P.O. Box 13759, Cairo (Egypt)

2007-07-01

Environmental pollution has become a world wide concern. One of the main sources of such pollution is sewage wastewater and sludge. Their utilization without proper treatment can pollute the ecosystem (plant, soil, surface and ground water). Sewage wastewater and sludge contains several pollutants such as: pathogens, toxic organic compounds, heavy metals, high level of BOD and COD, seed weed. The reuse of sewage water and sludge in agriculture can lead to the transfer of some of these pollutants into the food chain causing health hazard. In addition, most of these contaminants are not biodegradable, becoming dangerous to plant and human health. Nuclear techniques has recently been used to control environmental pollution. Ionizing radiation provide a fast and reliable means of sewage water and sludge treatment than the conventional methods. Gamma radiation ( {sup 60}Co) and electron beam (accelerator) has been successfully used for alleviation of environmental pollution. Such alleviation includes: disinfection of harmful pathogens, degradation of toxic organic pollutants, destruction of seed weed and reduction of soluble heavy metals, odor and BOD and COD. The use of radioactive and stable isotopes are a useful tools to investigate the contribution of sludge nutrients to plant nutrition. Nitrogen, using {sup 15}N-ammonium sulfate, uptake and translocation by plant from soil amended with sewage sludge was studied under field condition. The contribution of sludge to phosphorus nutrition of plants was quantified using {sup 32}p as tracer. In both cases the principal of isotopic dilution technique was applied. The information generated from these experiments could help preserve the environment. It could help optimize the application rate of sludge to meet plant requirements while avoiding the accumulation of N and P in the soil or leaching to the aquifer. Isotope exchange kinetic technique is used to evaluate nutrients availability from sludge. Neutron moisture meter is

Application Of Nuclear Techniques In Environmental Studies And Pollution Control

International Nuclear Information System (INIS)

EI-Motaium, R.A.

2007-01-01

Environmental pollution has become a world wide concern. One of the main sources of such pollution is sewage wastewater and sludge. Their utilization without proper treatment can pollute the ecosystem (plant, soil, surface and ground water). Sewage wastewater and sludge contains several pollutants such as: pathogens, toxic organic compounds, heavy metals, high level of BOD and COD, seed weed. The reuse of sewage water and sludge in agriculture can lead to the transfer of some of these pollutants into the food chain causing health hazard. In addition, most of these contaminants are not biodegradable, becoming dangerous to plant and human health. Nuclear techniques has recently been used to control environmental pollution. Ionizing radiation provide a fast and reliable means of sewage water and sludge treatment than the conventional methods. Gamma radiation ( 60 Co) and electron beam (accelerator) has been successfully used for alleviation of environmental pollution. Such alleviation includes: disinfection of harmful pathogens, degradation of toxic organic pollutants, destruction of seed weed and reduction of soluble heavy metals, odor and BOD and COD. The use of radioactive and stable isotopes are a useful tools to investigate the contribution of sludge nutrients to plant nutrition. Nitrogen, using 15 N-ammonium sulfate, uptake and translocation by plant from soil amended with sewage sludge was studied under field condition. The contribution of sludge to phosphorus nutrition of plants was quantified using 32 p as tracer. In both cases the principal of isotopic dilution technique was applied. The information generated from these experiments could help preserve the environment. It could help optimize the application rate of sludge to meet plant requirements while avoiding the accumulation of N and P in the soil or leaching to the aquifer. Isotope exchange kinetic technique is used to evaluate nutrients availability from sludge. Neutron moisture meter is used to

Nuclear radioactive techniques applied to materials research

CERN Document Server

Correia, João Guilherme; Wahl, Ulrich

2011-01-01

In this paper we review materials characterization techniques using radioactive isotopes at the ISOLDE/CERN facility. At ISOLDE intense beams of chemically clean radioactive isotopes are provided by selective ion-sources and high-resolution isotope separators, which are coupled on-line with particle accelerators. There, new experiments are performed by an increasing number of materials researchers, which use nuclear spectroscopic techniques such as Mössbauer, Perturbed Angular Correlations (PAC), beta-NMR and Emission Channeling with short-lived isotopes not available elsewhere. Additionally, diffusion studies and traditionally non-radioactive techniques as Deep Level Transient Spectroscopy, Hall effect and Photoluminescence measurements are performed on radioactive doped samples, providing in this way the element signature upon correlation of the time dependence of the signal with the isotope transmutation half-life. Current developments, applications and perspectives of using radioactive ion beams and tech...

Modeling of the heat transfer performance of plate-type dispersion nuclear fuel elements

Science.gov (United States)

Ding, Shurong; Huo, Yongzhong; Yan, XiaoQing

2009-08-01

Considering the mutual actions between fuel particles and the metal matrix, the three-dimensional finite element models are developed to simulate the heat transfer behaviors of dispersion nuclear fuel plates. The research results indicate that the temperatures of the fuel plate might rise more distinctly with considering the particle swelling and the degraded surface heat transfer coefficients with increasing burnup; the local heating phenomenon within the particles appears when their thermal conductivities are too low. With rise of the surface heat transfer coefficients, the temperatures within the fuel plate decrease; the temperatures of the fuel plate are sensitive to the variations of the heat transfer coefficients whose values are lower, but their effects are weakened and slight when the heat transfer coefficients increase and reach a certain extent. Increasing the heat generation rate leads to elevating the internal temperatures. The temperatures and the maximum temperature differences within the plate increase along with the particle volume fractions. The surface thermal flux goes up along with particle volume fractions and heat generation rates, but the effects of surface heat transfer coefficients are not evident.

Review of nuclear data improvement needs for nuclear radiation measurement techniques used at the CEA experimental reactor facilities

Directory of Open Access Journals (Sweden)

Destouches Christophe

2016-01-01

Full Text Available The constant improvement of the neutron and gamma calculation codes used in experimental nuclear reactors goes hand in hand with that of the associated nuclear data libraries. The validation of these calculation schemes always requires the confrontation with integral experiments performed in experimental reactors to be completed. Nuclear data of interest, straight as cross sections, or elaborated ones such as reactivity, are always derived from a reaction rate measurement which is the only measurable parameter in a nuclear sensor. So, in order to derive physical parameters from the electric signal of the sensor, one needs specific nuclear data libraries. This paper presents successively the main features of the measurement techniques used in the CEA experimental reactor facilities for the on-line and offline neutron/gamma flux characterizations: reactor dosimetry, neutron flux measurements with miniature fission chambers and Self Power Neutron Detector (SPND and gamma flux measurements with chamber ionization and TLD. For each technique, the nuclear data necessary for their interpretation will be presented, the main identified needs for improvement identified and an analysis of their impact on the quality of the measurement. Finally, a synthesis of the study will be done.

Role of nuclear techniques in oncological practice in Bangladesh

International Nuclear Information System (INIS)

Jehan, A.H.; Karim, M.A.; Begum, S.M.F.; Khan, H.U.

2004-01-01

Full text: Application of nuclear medicine techniques plays an integral part in the diagnosis, management and follow-up of cancer patients. Scintigraphic studies are able to detect primary and secondary malignant lesions in various organs e.g. bone, thyroid, breast, brain, lung, kidney, liver etc. Nuclear techniques are comparatively simple, non-invasive with minimum cost and radiation exposure. In recent years radio nuclide techniques are being widely accepted by the practicing oncologists especially for diagnosis, accurate assessment of the disease process and treatment planning. Bangladesh Atomic Energy Commission helped in establishing a Central Institute of Nuclear Medicine and Ultrasound and 14 smaller sub centers in the periphery, equipped with SPECT Gamma camera, Ultrasound, RIA, and DEXA facilities. A retrospective analysis of data of clinically diagnosed cancer patients referred to the sub center for diagnosis showed a total of 117 cases, 62 (72.54 %) female and 55 (64.35 %) male in the age group 40-70 years. The incidence of malignancy was calculated based on the age and gender. The highest incidence among the women was of cancer breast (67.74%) followed by liver (11.29%) and thyroid (11.29%). Among the male population, the highest incidence was of cancer prostate (29.09%) followed by liver (9.09%) and renal cell carcinoma (9.09%). As far as therapy is concerned, only cancer thyroid cases were assessed and considered for I-131 therapy with successful results. Of these patients treated with radioiodine, 9 were for primary disease while one patient had bony metastasis also. No death or complication has yet been reported. There is no controlled program for screening cancer patients in Bangladesh, but with assistance from the Nuclear Oncologists it was possible to obtain a raw data on the incidence of different cancers in Bangladesh. This in future may help in the management strategy of various malignancies. (author)

Use of Atomic and Nuclear Techniques in Elemental and Isotopic Analysis

International Nuclear Information System (INIS)

2008-01-01

This book is divided into four chapters which were presented by six authors of the best Arab specialists who have used the atomic and nuclear techniques for a long time and recognized their importance and capabilities in scientific researches. Atomic and Nuclear techniques are very successful in the field of analysis because they are the only way to proceed the analysis process with the requested accuracy and they are the cheapest at the same time. A number of these techniques were collected in this book on the basis of their accuracy and the abundance of using them in the analysis of material components, specially when these elements exist with insignificant percentage as in the case of poisons science, archaeology, nutrition, medicine and other applications.

Quality control of nuclear fuel plates using digital image processing techniques

International Nuclear Information System (INIS)

Salinas, Renato; Radd, Ulrich; Coronado, Harold; Olivares, Luis

2003-01-01

The Chilean Atomic Energy Commission (CCHEN) has developed the technology requires to manufacture low enriched uranium-235 nuclear fuel elements used in non-power reactor applications and in research. These fuel plates are assembled in two nuclear facilities located at La Reina (RECH-1) and Lo Aguirre where the present work was developed. Furthermore since high quality standards have been met, these facilities are able to export these nuclear fuel plates to foreign countries. Each MTR fuel elements consists of 16 low enriched uranium silicide (U 3 Si 2 ) fuel plates. A stringent quality assurance program requires among others, homogeneity measurements of uranium surface density values of these fuel plates, which are traditionally accomplished with optical densitometry methods. We have implemented and alternative technique which uses computer vision to determine uranium surface density values in these fuel plates. Both techniques are compared. Advantages of machine vision methods include considerable time saving and a complete quantitative evaluation of uranium densities as compared to the sparse technique involved in the optical densitometry method (Au)

Utilization technique for advanced nuclear materials database system Data-Free-Way'

International Nuclear Information System (INIS)

Fujita, Mitsutane; Kurihara, Yutaka; Kinugawa, Junichi; Kitajima, Masahiro; Nagakawa, Josei; Yamamoto, Norikazu; Noda, Tetsuji; Yagi, Koichi; Ono, Akira

2001-01-01

Four organizations the National Research Institute for Metals (NRIM), the Japan Atomic Energy Research Institute (JAERI), the Japan Nuclear Fuel Cycle Development Institute (JNC) and Japan Science and Technology Incorporation (JST), conducted the 2nd period joint research for the purpose of development of utilization techniques for advanced nuclear materials database system named 'Data-Free-Way' (DFW), to make more useful system to support research and development of the nuclear materials, from FY 1995 to FY 1999. NRIM intended to fill a data system on diffusion and nuclear data by developing utilization technique on diffusion informations of steels and aluminum and nuclear data for materials for its independent system together with participating in fulfil of the DFW. And, NRIM has entered to a project on wide area band circuit application agreed at the G7 by using technologies cultivated by NRIM, to investigate network application technology with the Michigan State University over the sea under cooperation assistant business of JST, to make results on CCT diagram for welding and forecasting of welding heat history accumulated at NRIM for a long term, to perform development of a simulator assisting optimum condition decision of welding. (G.K.)

Nuclear techniques in agriculture and industry in China

International Nuclear Information System (INIS)

Lu Yanxiao

1993-01-01

The presentation describes the application of nuclear techniques related to information acquisition by radiotracer and isotope-instrument getting physical parameters from measured substances, medical diagnostic information, evolution of novel substances or modification of materials through interaction of ionizing radiation with matter,mutation breeding in agriculture, cancer therapy in medicine, sterilization of medical products

Environmental monitoring in Slovakia using nuclear techniques

International Nuclear Information System (INIS)

Florek, M.; Holy, K.; Sivo, A.; Sykora, I.; Chudy, M.; Richtarikova, M.; Polaskova, A.; Hola, O.; Meresova, J.; Ondo-Estok, D.; Mankovska, B.; Frontasyeva, M.V.; Ermakov, E.V.

2005-01-01

The contamination of the atmosphere of Slovakia by stable elements and also by-,radionuclides as 14 C, 7 Be, 210 Pb and 222 Rn were studied during the last decade using nuclear techniques. The main aims of this research were the better understanding of processes taking place in the atmosphere, the quantification of the atmospheric pollution and its trend, as well as the evaluation of the health risk from this pollution

Transferring aviation human factors technology to the nuclear power industry

International Nuclear Information System (INIS)

Montemerlo, M.D.

1981-01-01

The purpose of this paper is to demonstrate the availability of aviation safety technology and research on problems which are sufficiently similar to those faced by the nuclear power industry that an agressive effort to adapt and transfer that technology and research is warranted. Because of time and space constraints, the scope of this paper is reduced from a discussion of all of aviation safety technology to the human factors of air carrier safety. This area was selected not only because of similarities in the human factors challenges shared by both industries (e.g. selection, training, evaluation, certification, etc.) but because experience in aviation has clearly demonstrated that human error contributes to a substantially greater proportion of accidents and incidents than does equipment failure. The Congress of the United States has placed a great deal of emphasis on investigating and solving human factors problems in aviation. A number of recent examples of this interest and of the resulting actions are described. The opinions of prominent aviation organizations as to the human factors problems most in need of research are presented, along with indications of where technology transfer to the nuclear power industry may be viable. The areas covered include: fatigue, crew size, information transfer, resource management, safety data-bases, the role of automation, voice and data recording systems, crew distractions, the management of safety regulatory agencies, equipment recertification, team training, crew work-load, behavioural factors, human factors of equipment design, medical problems, toxicological factors, the use of simulators for training and certification, determining the causes of human errors, the politics of systems improvement, and importance of both safety and public perception of safety if the industry is to be viable. (author)

Information about the CENA: Agriculture Nuclear Energy Center

International Nuclear Information System (INIS)

1982-10-01

The purposes of the CENA-Brazil is described in this paper such as to develop and absorb techniques and nuclear methods of research interest and agricultural applications; to spread the methods and techniques through the courses, scientific exchange and publications; to develop in permanent character, researches, studies and works of nuclear energy application in agricultural problems and transfer the technology to the public; cooperation programs with the others units and USP-Sao Paulo University in graduation and post-graduation courses. (L.M.J.)

Invisible nuclear; converting nuclear

International Nuclear Information System (INIS)

Park, Jongmoon

1993-03-01

This book consists of 14 chapters which are CNN era and big science, from East and West to North and South, illusory nuclear strategy, UN and nuclear arms reduction, management of armaments, advent of petroleum period, the track of nuclear power generation, view of energy, internationalization of environment, the war over water in the Middle East, influence of radiation and an isotope technology transfer and transfer armament into civilian industry, the end of nuclear period and the nuclear Nonproliferation, national scientific and technological power and political organ and executive organ.

Basic principles of applied nuclear techniques

International Nuclear Information System (INIS)

Basson, J.K.

1976-01-01

The technological applications of radioactive isotopes and radiation in South Africa have grown steadily since the first consignment of man-made radioisotopes reached this country in 1948. By the end of 1975 there were 412 authorised non-medical organisations (327 industries) using hundreds of sealed sources as well as their fair share of the thousands of radioisotope consignments, annually either imported or produced locally (mainly for medical purposes). Consequently, it is necessary for South African technologists to understand the principles of radioactivity in order to appreciate the industrial applications of nuclear techniques [af

Geoelectrical Measurement of Multi-Scale Mass Transfer Parameters

Energy Technology Data Exchange (ETDEWEB)

Day-Lewis, Frederick; Singha, Kamini; Haggerty, Roy; Johnson, Tim; Binley, Andrew; Lane, John

2014-01-16

Mass transfer affects contaminant transport and is thought to control the efficiency of aquifer remediation at a number of sites within the Department of Energy (DOE) complex. An improved understanding of mass transfer is critical to meeting the enormous scientific and engineering challenges currently facing DOE. Informed design of site remedies and long-term stewardship of radionuclide-contaminated sites will require new cost-effective laboratory and field techniques to measure the parameters controlling mass transfer spatially and across a range of scales. In this project, we sought to capitalize on the geophysical signatures of mass transfer. Previous numerical modeling and pilot-scale field experiments suggested that mass transfer produces a geoelectrical signature—a hysteretic relation between sampled (mobile-domain) fluid conductivity and bulk (mobile + immobile) conductivity—over a range of scales relevant to aquifer remediation. In this work, we investigated the geoelectrical signature of mass transfer during tracer transport in a series of controlled experiments to determine the operation of controlling parameters, and also investigated the use of complex-resistivity (CR) as a means of quantifying mass transfer parameters in situ without tracer experiments. In an add-on component to our grant, we additionally considered nuclear magnetic resonance (NMR) to help parse mobile from immobile porosities. Including the NMR component, our revised study objectives were to: 1. Develop and demonstrate geophysical approaches to measure mass-transfer parameters spatially and over a range of scales, including the combination of electrical resistivity monitoring, tracer tests, complex resistivity, nuclear magnetic resonance, and materials characterization; and 2. Provide mass-transfer estimates for improved understanding of contaminant fate and transport at DOE sites, such as uranium transport at the Hanford 300 Area. To achieve our objectives, we implemented a 3

Nuclear techniques in the coal industry. Proceedings of a final research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

With the aim of promoting advanced research and facilitating a more extensive application of nuclear techniques for environmental protection in the exploration and exploitation of coal, the IAEA established the present co-ordinated research programme (CRP) in 1989. This report includes an assessment of the current status and trends in nuclear techniques in the coal industry and the results obtained by the participants at the CRP. Proceedings of the final CRP on ``Nuclear Techniques in Exploration and Exploitation of Coal: On-line and Bulk Analysis and Evaluation of Potential Environmental Pollutants in Coal and Coke``, was held in Krakow, Poland, from 9 to 12 May 1994. Refs, figs, tabs.

Demonstration of laser processing technique combined with water jet technique for retrieval of fuel debris at Fukushima Daiichi Nuclear Power Station

International Nuclear Information System (INIS)

Hanari, Toshihide; Takebe, Toshihiko; Yamada, Tomonori; Daido, Hiroyuki; Ishizuka, Ippei; Ohmori, Shinya; Kurosawa, Koichi; Sasaki, Go; Nakada, Masahiro; Sakai, Hideaki

2017-01-01

In decommissioning of Fukushima Daiichi Nuclear Power Station, a retrieval process of fuel debris in the Primary Containment Vessel by a remote operation is one of the key issues. In this process, prevention of spreading radioactive materials is one of the important considerations. Furthermore, an applicable technique to the process requires keeping of reasonable processing-efficiency. We propose to use the combined technique including a laser light and a water jet as a retrieval technique of the fuel debris. The laser processing technique combined with a repetitive pulsed water jet could perform an efficient retrieval processing. Our experimental result encourages us to promote further development of the technique towards a real application at Fukushima Daiichi Nuclear Power Station. (author)

Knowledge transfer in Swedish Nuclear Power Plants in connection with retirements; Kompetensoeverfoering paa svenska kaernkraftverk i samband med pensionsavgaangar

Energy Technology Data Exchange (ETDEWEB)

Larsson, Annika; Ohlsson, Kjell; Roos, Anna

2007-12-13

This report displays how the Swedish nuclear power plants Forsmark, Oskarshamn and Ringhals work with knowledge management. The report also consists of a literature review of appropriate ways to extract tacit knowledge as well as methods to transfer competence. The report is made up of a smaller number of interviews at the nuclear power plants in combination with a questionnaire distributed to a larger number of people at the plants. The results of the interview study is that only one of the Swedish nuclear power plants have a programme to transfer knowledge from older staff to newer. This is, however, not a programme for everyone. Another plant has a programme for knowledge building, but only for their specialists. At both plants, which lack a programme, the interviewees request more structure in knowledge transfer; even though they feel the current way of transferring knowledge with mentors works well. Besides more structure, interviewees present a wish to have more time for knowledge transfer as well as the opportunity to recruit more than needed. Recruiting more than needed is however not very simple due to multiple causes such as nominal sizing departments and a difficulty of recruiting people to work far from larger cities. The way things are now, many feel too under-staffed and under a lot of time pressure daily to also have time for knowledge transfer besides their normal work.

The selection of probabilistic safety assessment techniques for non-reactor nuclear facilities

International Nuclear Information System (INIS)

Vail, J.

1992-01-01

Historically, the probabilistic safety assessment (PSA) methodology of choice is the well known event tree/fault tree inductive technique. For reactor facilities is has stood the test of time. Some non-reactor nuclear facilities have found inductive methodologies difficult to apply. The stand-alone fault tree deductive technique has been used effectively to analyze risk in nuclear chemical processing facilities and waste handling facilities. The selection between the two choices suggest benefits from use of the deductive method for non-reactor facilities

Moisture measurements in iron ores, in freight cars, through nuclear techniques

International Nuclear Information System (INIS)

Castagnet, A.C.; Said, M.; Duarte, U.

1975-01-01

The possibility and the advantages of using a nuclear technique for measuring on the spot (in the freight cars) and the moisture content of iron ores are described. The measurements included the determination of the volumetric moisture content and the density. From this values, the moisture content in percentage by weight was calculated. Nuclear Chicago d/M Combination Density-Moisture Probe with a 5 mCi Ra/Be source, and a digital portable scaler, were used. The investigated techniques give good results when the measurements are made directly on the ore surface, and has economical advantages over the gravimetric method by sampling. The probable reasons for both, the aleatory scattering of points and the lack of linear correlation between the values of both methods, when the nuclear measurement is made across the car walls are analized

Dictionary of the terms on nuclear scientific technique of France and Korea

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-09-15

This book is a dictionary of the terms on nuclear scientific technique, which defines 3,400 terms and phrases in detailed explanation and lists in order of French, Korean and English. The terms are in alphabetical order, which are collision, elastic collision, nuclear fusion, fusion energy, absorption analysis, absorption curve, neutron, nuclear, radiation, radioactivity, reactor, nuclear disintegration, and so on. This book has appendixes on a standard unit, radiation size and unit, and the table of elements.

Dictionary of the terms on nuclear scientific technique of France and Korea

International Nuclear Information System (INIS)

1984-09-01

This book is a dictionary of the terms on nuclear scientific technique, which defines 3,400 terms and phrases in detailed explanation and lists in order of French, Korean and English. The terms are in alphabetical order, which are collision, elastic collision, nuclear fusion, fusion energy, absorption analysis, absorption curve, neutron, nuclear, radiation, radioactivity, reactor, nuclear disintegration, and so on. This book has appendixes on a standard unit, radiation size and unit, and the table of elements.

A highly efficient method for generation of therapeutic quality human pluripotent stem cells by using naive induced pluripotent stem cells nucleus for nuclear transfer.

Science.gov (United States)

Sanal, Madhusudana Girija

2014-01-01

Even after several years since the discovery of human embryonic stem cells and induced pluripotent stem cells (iPSC), we are still unable to make any significant therapeutic benefits out of them such as cell therapy or generation of organs for transplantation. Recent success in somatic cell nuclear transfer (SCNT) made it possible to generate diploid embryonic stem cells, which opens up the way to make high-quality pluripotent stem cells. However, the process is highly inefficient and hence expensive compared to the generation of iPSC. Even with the latest SCNT technology, we are not sure whether one can make therapeutic quality pluripotent stem cell from any patient's somatic cells or by using oocytes from any donor. Combining iPSC technology with SCNT, that is, by using the nucleus of the candidate somatic cell which got reprogrammed to pluripotent state instead that of the unmodified nucleus of the candidate somatic cell, would boost the efficiency of the technique, and we would be able to generate therapeutic quality pluripotent stem cells. Induced pluripotent stem cell nuclear transfer (iPSCNT) combines the efficiency of iPSC generation with the speed and natural reprogramming environment of SCNT. The new technique may be called iPSCNT. This technique could prove to have very revolutionary benefits for humankind. This could be useful in generating organs for transplantation for patients and for reproductive cloning, especially for childless men and women who cannot have children by any other techniques. When combined with advanced gene editing techniques (such as CRISPR-Cas system) this technique might also prove useful to those who want to have healthy children but suffer from inherited diseases. The current code of ethics may be against reproductive cloning. However, this will change with time as it happened with most of the revolutionary scientific breakthroughs. After all, it is the right of every human to have healthy offspring and it is the question of

A highly efficient method for generation of therapeutic quality human pluripotent stem cells by using naive induced pluripotent stem cells nucleus for nuclear transfer

Directory of Open Access Journals (Sweden)

Madhusudana Girija Sanal

2014-09-01

Full Text Available Even after several years since the discovery of human embryonic stem cells and induced pluripotent stem cells (iPSC, we are still unable to make any significant therapeutic benefits out of them such as cell therapy or generation of organs for transplantation. Recent success in somatic cell nuclear transfer (SCNT made it possible to generate diploid embryonic stem cells, which opens up the way to make high-quality pluripotent stem cells. However, the process is highly inefficient and hence expensive compared to the generation of iPSC. Even with the latest SCNT technology, we are not sure whether one can make therapeutic quality pluripotent stem cell from any patient’s somatic cells or by using oocytes from any donor. Combining iPSC technology with SCNT, that is, by using the nucleus of the candidate somatic cell which got reprogrammed to pluripotent state instead that of the unmodified nucleus of the candidate somatic cell, would boost the efficiency of the technique, and we would be able to generate therapeutic quality pluripotent stem cells. Induced pluripotent stem cell nuclear transfer (iPSCNT combines the efficiency of iPSC generation with the speed and natural reprogramming environment of SCNT. The new technique may be called iPSCNT. This technique could prove to have very revolutionary benefits for humankind. This could be useful in generating organs for transplantation for patients and for reproductive cloning, especially for childless men and women who cannot have children by any other techniques. When combined with advanced gene editing techniques (such as CRISPR-Cas system this technique might also prove useful to those who want to have healthy children but suffer from inherited diseases. The current code of ethics may be against reproductive cloning. However, this will change with time as it happened with most of the revolutionary scientific breakthroughs. After all, it is the right of every human to have healthy offspring and it is

Applications of nuclear techniques relevant for civil security

International Nuclear Information System (INIS)

Valkovi, Vlado

2006-01-01

The list of materials which are subject to inspection with the aim of reducing the acts of terrorism includes explosives, narcotics, chemical weapons, hazardous chemicals and radioactive materials. To this we should add also illicit trafficking with human beings. The risk of nuclear terrorism carried out by sub-national groups is considered not only in construction and/or use of nuclear device, but also in possible radioactive contamination of large urban areas. Modern personnel, parcel, vehicle and cargo inspection systems are non-invasive imaging techniques based on the use of nuclear analytical techniques. The inspection systems use penetrating radiations: hard x-rays (300 keV or more) or gamma-rays from radioactive sources ( 137 Cs and 60 Co with energies from 600 to 1300 keV) that produce a high resolution radiograph of the load. Unfortunately, this information is 'non-specific' in that it gives no information on the nature of objects that do not match the travel documents and are not recognized by a visual analysis of the radiographic picture. Moreover, there are regions of the container where x and gamma-ray systems are 'blind' due to the high average atomic number of the objects irradiated that appear as black spots in the radiographic image. Contrary to that is the use of neutrons; as results of the bombardment, nuclear reactions occur and a variety of nuclear particles, gamma and x-ray radiation is emitted, specific for each element in the bombarded material. The problem of material (explosive, drugs, chemicals, etc.) identification can be reduced to the problem of measuring elemental concentrations. Neutron scanning technology offers capabilities far beyond those of conventional inspection systems. The unique automatic, material specific detection of terrorist threats can significantly increase the security at ports, border-crossing stations, airports, and even within the domestic transportation infrastructure of potential urban targets as well as

Applications of nuclear techniques relevant for civil security

Energy Technology Data Exchange (ETDEWEB)

Valkovi, Vlado [Institute Ruder Boskovi, Zagreb (Croatia)

2006-05-15

The list of materials which are subject to inspection with the aim of reducing the acts of terrorism includes explosives, narcotics, chemical weapons, hazardous chemicals and radioactive materials. To this we should add also illicit trafficking with human beings. The risk of nuclear terrorism carried out by sub-national groups is considered not only in construction and/or use of nuclear device, but also in possible radioactive contamination of large urban areas. Modern personnel, parcel, vehicle and cargo inspection systems are non-invasive imaging techniques based on the use of nuclear analytical techniques. The inspection systems use penetrating radiations: hard x-rays (300 keV or more) or gamma-rays from radioactive sources ({sup 137}Cs and {sup 60}Co with energies from 600 to 1300 keV) that produce a high resolution radiograph of the load. Unfortunately, this information is 'non-specific' in that it gives no information on the nature of objects that do not match the travel documents and are not recognized by a visual analysis of the radiographic picture. Moreover, there are regions of the container where x and gamma-ray systems are 'blind' due to the high average atomic number of the objects irradiated that appear as black spots in the radiographic image. Contrary to that is the use of neutrons; as results of the bombardment, nuclear reactions occur and a variety of nuclear particles, gamma and x-ray radiation is emitted, specific for each element in the bombarded material. The problem of material (explosive, drugs, chemicals, etc.) identification can be reduced to the problem of measuring elemental concentrations. Neutron scanning technology offers capabilities far beyond those of conventional inspection systems. The unique automatic, material specific detection of terrorist threats can significantly increase the security at ports, border-crossing stations, airports, and even within the domestic transportation infrastructure of potential

77 FR 24228 - Condition Monitoring Techniques for Electric Cables Used in Nuclear Power Plants

Science.gov (United States)

2012-04-23

... Used in Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Regulatory guide; issuance... guide, (RG) 1.218, ``Condition Monitoring Techniques for Electric Cables Used in Nuclear Power Plants... of electric cables for nuclear power plants. RG 1.218 is not intended to be prescriptive, instead it...

Nuclear Techniques for Coronary Heart Disease Therapy after Percutaneous Transluminal Coronary Angioplasty

International Nuclear Information System (INIS)

Nurlaila-Z

2005-01-01

Nuclear techniques studies of the heart represent one of the fastest growing areas of research. Several years ago, nuclear medicine cardiac studies were limited for the evaluation and diagnosis of myocardial infarction. Development in radiopharmaceutical-chemistry and instrumentation have made possible advances in nuclear medicine for restenosis cardiovascular therapy after percutaneous transluminal coronary angioplasty.The radionuclide as radiation source can be delivered to the target basically by two techniques, those are catheter-based systems and radioactive stents. For this purpose,it can be use the γ and β emitter radionuclides, in which the β emitter radionuclides is an ideal radionuclide for endovascular therapy. Restenosis after percutaneous transluminal coronary angioplasty can be prevented by using the radioactive stent. This review discusses several techniques which could be used for restenosis cardiovascular therapy. Furthermore, several types of radiopharmaceutical and kinds of radionuclides as well as doses of the compounds for this purpose are also reviewed. (author)

Nuclear techniques in the diagnosis of lung diseases

Energy Technology Data Exchange (ETDEWEB)

Isawa, T

1993-12-31

Lung studies by nuclear techniques have been mostly neglected so far in the developing countries because ``total lung imaging`` was not possible. The availability of radioaerosols had now provided means to do complete lung studies in these countries. IAEA`s effort to make radioaerosol techniques more widely available in the Asian countries has been most noteworthy. Pulmonary tuberculosis is still prevalent in the developing countries, scourge of smoking is becoming increasingly wide spread and atmospheric pollution is on the rise as these countries race towards industrialisation with insufficient technical and financial resources. These conditions would provide a fascinating backdrop of infective, cancerous and pollution-induced conditions of lungs where lung imaging techniques would have a large scope of providing useful service 11 figs, 1 tab

Nuclear techniques in the diagnosis of lung diseases

International Nuclear Information System (INIS)

Isawa, T.

1992-01-01

Lung studies by nuclear techniques have been mostly neglected so far in the developing countries because ''total lung imaging'' was not possible. The availability of radioaerosols had now provided means to do complete lung studies in these countries. IAEA's effort to make radioaerosol techniques more widely available in the Asian countries has been most noteworthy. Pulmonary tuberculosis is still prevalent in the developing countries, scourge of smoking is becoming increasingly wide spread and atmospheric pollution is on the rise as these countries race towards industrialisation with insufficient technical and financial resources. These conditions would provide a fascinating backdrop of infective, cancerous and pollution-induced conditions of lungs where lung imaging techniques would have a large scope of providing useful service

4 years of successful knowledge transfer - the nuclear technology training center of the TUeV Nord Group

International Nuclear Information System (INIS)

Willenbockel, I.; Tietze, U.

2007-01-01

In connection with the 2002 amendment to the German Atomic Energy Act, the topics of generational change and maintenance of competence grew in importance and necessitated new solution approaches. To this end, various activities were launched, with the aim of conducting conceptual analyses of these topics. Examples include the 'National Competence Network for Nuclear Technology' (Nationaler Kompetenzverbund fuer Kerntechnik), various networks established by colleges and universities, the 'Knowledge Management for the Maintenance and Transfer of Competence in Reactor Safety' (Wissensmanagement zum Kompetenzerhalt und -transfer in der Reaktorsicherheit) workshop held in 2001 in Garching near Munich (Germany) and the 'Ad-hoc Workgroup on the Maintenance of Competence' (Ad-hoc-Arbeitskreis Kompetenzerhalt) of the VdTUeV. The nuclear technology departments of the TUeV Nord Group were aware of te challenges associated with the generational change early on. By establishing the 'Nuclear Technology Training Center' (Ausbildungszentrum fuer Kerntechnik, AfK), the TUeV Nord Group intended to ensure the required knowledge transfer during the generational change as well as maintain the renowned high qualification as regards the subject of nuclear technology and thus continue to provide - in the sense of social responsibility - crucial contribution to the long-term safety of nuclear plants. Four years have passed since the training center held the first courses in the fall of 2002. Up to now, more than 350 participants have been trained in the courses conducted by the AfK. In the opinion of the TUeV Nord Group, the activities of the AfK have laid the foundation for a successful change of generations within the group's nuclear technology organizations. (orig.)

Charged-particle transfer reactions and nuclear astrophysics problems

International Nuclear Information System (INIS)

Artemov, S.V.; Yarmukhamedov, R.; Yuldashev, B.S.; Burtebaev, N.; Duysebaev, A.; Kadyrzhanov, K.K.

2002-01-01

In the report a review of the recent results of calculation of the astrophysical S-factors S(E) for the D(α, γ) 6 Li, 3 He(α, γ) 7 Be, 7 Be(p, γ) 8 Be, 12,13 C(p, γ) 13, 14 N and 12 C(p,γ) 16 O* reactions at extremely low energies E, including value E=0 , performed within the framework of a new method taking into account the additional information about the nuclear vertex constant (Nc) (or the respective asymptotic normalization coefficient) are presented. The required values of Nc can be obtained from an analysis of measured differential cross-sections of proton and α-particle transfer reactions (for example A( 3 He,d)B, 6 Li(d, 6 Li)d, 6 Li(α, 6 Li)α, 12 C( 6 Li, d) 16 O* etc.). A comparative analysis between the results obtained by different authors is also done. Taking into account an important role of the NVC's values for the nuclear astrophysical A(p, γ)B and A(α, γ)B reactions, a possibility of obtaining the reliable NVC values for the virtual decay B→A+p and B→A+α from the analysis of differential cross sections both sub- and above-barrier A( 3 He, d) and A( 6,7 Li, 2,3 H)B reactions is discussed in detail. In this line the use the isochronous cyclotron U-150 M, the 'DC-60' heavy ion machine and electrostatic charge-exchanging accelerator UKP-2-1 of Institute of Nuclear Physics of National Nuclear Center of the Republic of Kazakhstan for carrying out the needed experiments is considered and the possibility of the obtained data application for the astrophysical interest is also discussed

Physical and measuring principles of nuclear well logging techniques

International Nuclear Information System (INIS)

Loetzsch, U.; Winkler, R.

1981-01-01

Proceeding from the general task of nuclear geophysics as a special discipline of applied geophyscis, the essential physical problems of nuclear well logging techniques are considered. Particularly, the quantitative relationship between measured values and interesting geologic parameters to be determined are discussed taking into account internal and external perturbation parameters. Resulting from this study, the technological requirements for radiation sources and their shielding, for detectors, electronic circuits in logging tools, signal transmission by cable and recording equipment are derived, and explained on the basis of examples of gamma-gamma and neutron-neutron logging. (author)

Heat transfer and friction correlations required to describe steam--water behavior in nuclear safety studies

International Nuclear Information System (INIS)

Solbrig, C.W.; McFadden, J.H.; Lyczkowski, R.W.; Hughes, E.D.

1975-01-01

The description of two-phase flow is important in nuclear safety studies. Recent two-phase flow descriptions are based upon unequal phase velocities and unequal phase temperatures (UVUT) theories with interphase interaction terms. These theories are more mechanistic than homogeneous theories and require more and different types of correlations than homogeneous theories. The UVUT theories require correlations (or models) which describe wall and interphase mass transfer, friction, momentum transfer, and heat transfer for all flow regimes and heat transfer regimes. A set of correlations is presented in this paper which can be used with UVUT theories. These correlations cover the complete range of parameters needed and in all cases are expected to yield reasonable numbers. (U.S.)

Fuel transfer machine

International Nuclear Information System (INIS)

Bernstein, I.

1978-01-01

A nuclear fuel transfer machine for transferring fuel assemblies through the fuel transfer tube of a nuclear power generating plant containment structure is described. A conventional reversible drive cable is attached to the fuel transfer carriage to drive it horizontally through the tube. A shuttle carrying a sheave at each end is arranged in parallel with the carriage to also travel into the tube. The cable cooperating with the sheaves permit driving a relatively short fuel transfer carriage a large distance without manually installing sheaves or drive apparatus in the tunnel. 8 claims, 3 figures

Nuclear prehistory influence on transfer velocity of 54Mn impurity 'hot' atoms in irradiated metallic iron

International Nuclear Information System (INIS)

Alekseev, I.E.

2007-01-01

Influence of nuclear prehistory on transfer velocity of 54 Mn impurity 'hot'-atoms - got by different nuclear channels: 56 Fe(d, α), 54 Fe(n,p) in irradiated metallic iron - is studied. Irradiation of targets were carried out in U-120 accelerator (energy range 7.3/5.3 MeV, deuteron beam current makes up 5 μA). Mean density of thermal neutron (WWR-M reactor) makes up 8.6·10 13 neutron·cm -2 ·s -1 . It is shown, that transfer velocity of 54 Mn 'hot' atoms is defining by rate of radiation damage of targets in the irradiation process at that a key importance has a bombarding particles type applied for radioactive label getting

Application of artificial intelligence techniques to TRR operation

International Nuclear Information System (INIS)

Ho, L.; Tseng, C.; Chang, S.

1986-01-01

It has been over ten years since TRR had its initial critical. To collect the experiences of shift operators and technique staffs and transfer these experts' knowledge to a computer and build an expert system is a typical application of artificial intelligence techniques to nuclear business. The system can provide the correct information of TRR operation for shift personnel, new staffs and other technical people

National symposium: nuclear technique in industry, medicine, agriculture and environment protection. Abstracts of papers

International Nuclear Information System (INIS)

1995-01-01

The National Symposium 'Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection' has been held in Rynia near Warsaw from 24 to 27 April 1995. Totally 94 lectures have been presented. The actual state of art in Polish investigations have been shown in all branches of applied nuclear sciences. The plenary session devoted to general topics has began the symposium. Further conference has been divided into 18 subject sessions. There were: 1) radiation technologies in environment protection; 2) radiation technologies in materials engineering; 3) radiation preservation in food; 4) radiation techniques for medical use; 5) radiotracers in industrial investigations; 6) radiotracers in water and sewage management and leak control; 7) tracers in hydrology; 8) radiotracers in materials testing; 9) instruments for environment protection, 10) radiometric industrial gages; 11) diagnostic and testing instruments; 12) application of nuclear techniques in materials testing; 13) applications of nuclear techniques in geology and hydrogeology; 14) radioanalytical methods; 15) radiation detectors; 16) radiation measurements; 17) data processing from radiometric experiments; 18) accelerators, isotopes manufacturing, INIS

In vitro oocyte culture and somatic cell nuclear transfer used to produce a live-born cloned goat.

Science.gov (United States)

Ohkoshi, Katsuhiro; Takahashi, Seiya; Koyama, Shin-Ichiro; Akagi, Satoshi; Adachi, Noritaka; Furusawa, Tadashi; Fujimoto, Jun-Ichiro; Takeda, Kumiko; Kubo, Masanori; Izaike, Yoshiaki; Tokunaga, Tomoyuki

2003-01-01

The use of an in vitro culture system was examined for production of somatic cells suitable for nuclear transfer in the goat. Goat cumulus-oocyte complexes were incubated in tissue culture medium TCM-199 supplemented with 10% fetal bovine serum (FBS) for 20 h. In vitro matured (IVM) oocytes were enucleated and used as karyoplast recipients. Donor cells obtained from the anterior pituitary of an adult male were introduced into the perivitelline space of enucleated IVM oocytes and fused by an electrical pulse. Reconstituted oocytes were cultured in chemically defined medium for 9 days. Two hundred and twenty-eight oocytes (70%) were fused with donor cells. After in vitro culture, seven somatic cell nuclear transfer (SCNT) oocytes (3%) developed to the blastocyst stage. SCNT embryos were transferred to the oviducts of recipient females (four 8-cell embryos per female) or uterine horn (two blastocysts per female). One male clone (NT1) was produced at day 153 from an SCNT blastocyst and died 16 days after birth. This study demonstrates that nuclear transferred goat oocytes produced using an in vitro culture system could develop to term and that donor anterior pituitary cells have the developmental potential to produce term offspring. In this study, it suggested that the artificial control of endocrine system in domestic animal might become possible by the genetic modification to anterior pituitary cells.

Technology transfer on long-term radioactive waste management - a feasible option for small nuclear programmes?

International Nuclear Information System (INIS)

Mele, I.; Mathieson, J.

2007-01-01

The EU project CATT - Co-operation and technology transfer on long-term radioactive waste management for Member States with small nuclear programmes investigated the feasibility of countries with small nuclear programmes implementing long-term radioactive waste management solutions within their national borders, through collaboration on technology transfer with those countries with advanced disposal concepts. The main project objective was to analyse the existing capabilities of technology owning Member States and the corresponding requirements of potential technology acquiring Member States and, based on the findings, to develop a number of possible collaboration models and scenarios that could be used in a technology transfer scheme. The project CATT was performed as a specific support action under the EU sixth framework programme and it brought together waste management organisations from six EU Member States: UK, Bulgaria, Germany, Lithuania, Slovenia and Sweden. In addition, the EC Joint Research Centre from the Netherlands also participated as a full partner. The paper summarises the analyses performed and the results obtained within the project. (author)

Application of nuclear techniques in Poland; Perspektywy wykorzystania atomistyki w Polsce

Energy Technology Data Exchange (ETDEWEB)

Chmielewski, A.G.; Owczarczyk, A.; Urbanski, P. [Instytut Chemii i Techniki Jadrowej, Warsaw (Poland); Romanowski, M. [Biuro Studiow i Projektow Techniki Jadrowej `Proatom`, Warsaw (Poland); Stegowski, Z. [Akademia Gorniczo-Hutnicza, Cracow (Poland); Nowak, K. [Osrodek Badawczo-Rozwojowy Izotopow, Swierk-Otwock (Poland); Pachan, A. [Instytut Problemow Jadrowych, Swierk-Otwock (Poland); Tanczyk, R. [Centralne Laboratorium Ochrony Radiologicznej, Warsaw (Poland); Jablonski, R. [Zaklad Techniki Izotopowej `Polon-Izot`, Warsaw (Poland)

1997-12-31

The commercial applications of nuclear techniques in Poland have been presented. The special attention have been paid at: radiation technologies, application of radiometric gages in different branches of industry, tracer techniques, production and application of radiation sources in medicine, industry and material testing. 10 refs, 6 figs, 6 tabs.

Taking a Dive for a Friend - The Decision to Transfer Nuclear Submarine Technology to Canada

National Research Council Canada - National Science Library

Brubaker, Gerald L

1990-01-01

.... national security bureaucracy: President Reagan had approved the transfer of U.S.-developed nuclear submarine propulsion technology to Canada and would inform Prime Minister Brian Mulroney during his visit to Washington later that month...

Transfer coefficients to terrestrial food products in equilibrium assessment models for nuclear installations

International Nuclear Information System (INIS)

Zach, R.

1980-09-01

Transfer coefficients have become virtually indispensible in the study of the fate of radioisotopes released from nuclear installations. These coefficients are used in equilibrium assessment models where they specify the degree of transfer in food chains of individual radioisotopes from soil to plant products and from feed or forage and drinking water to animal products and ultimately to man. Information on transfer coefficients for terrestrial food chain models is very piecemeal and occurs in a wide variety of journals and reports. To enable us to choose or determine suitable values for assessments, we have addressed the following aspects of transfer coefficients on a very broad scale: (1) definitions, (2) equilibrium assumption, which stipulates that transfer coefficients be restricted to equilibrium or steady rate conditions, (3) assumption of linearity, that is the idea that radioisotope concentrations in food products increase linearly with contamination levels in the soil or animal feed, (4) methods of determination, (5) variability, (6) generic versus site-specific values, (7) statistical aspects, (8) use, (9) sources of currently used values, (10) criteria for revising values, (11) establishment and maintenance of files on transfer coefficients, and (12) future developments. (auth)

Legal aspects of nuclear technology transfer in connection with Latin America

International Nuclear Information System (INIS)

Zaldivar, E.

1983-01-01

This paper concerns technology and technology transfers which are becoming increasingly important for developing countries, especially those in South America. The author also points out that developed countries have not implemented the United Nations resolutions concerning dissemination of knowledge on advanced technologies. He stresses that if South American States wish to obtain assistance with nuclear technology from developed countries they should sign and ratify the Non-Proliferation Treaty and the Tlatelolco Treaty. (NEA) [fr

Energy transfer in isolated LHC II studied by femtosecond pump-probe technique

CERN Document Server

Yang Yi; Liu Yuan; Liu Wei Min; Zhu Rong Yi; Qian Shi Xiong; Xu Chun He

2003-01-01

Excitation energy transfer in the isolated light-harvesting chlorophyll (Chl)-a/b protein complex of photosystem II (LHC II) was studied by the one-colour pump-probe technique with femtosecond time resolution. After exciting Chl-b by 638nm beam, the dynamic behaviour shows that the ultrafast energy transfer from Chl-b at positions of B2, B3, and B5 to the corresponding Chl-a molecules in monomeric subunit of LHC II is in the time scale of 230fs. While with the excitation of Chl-a at 678nm, the energy transfer between excitons of Chl-a molecules has the lifetime of about 370 fs, and two other slow decay components are due to the energy transfer between different Chl-a molecules in a monomeric subunit of LHC II or in different subunits, or due to change of molecular conformation. (20 refs).

Applications of one-dimensional or two-dimensional nuclear magnetic resonance to the structural and conformational study of oligosaccharides. Design and adjustment of new techniques

International Nuclear Information System (INIS)

Berthault, Patrick

1988-01-01

Oligosaccharides are natural compounds of huge importance as they intervene in all metabolic processes of cell life. Before the determination of structure-activity relationships, a precise knowledge of their chemical nature is therefore required. Thus, this research thesis aims at describing various experiments of high resolution nuclear magnetic resonance (NMR), and at demonstrating their applications on four oligosaccharides. After a brief description of NMR principles by using a conventional description and also a formalism derived from quantum mechanics, the author outlines the weaknesses of old NMR techniques, and introduces new techniques by using scalar couplings, by processing magnetization transfers with one-dimensional hetero-nuclear experiments. General principles of two-dimensional experiments are then presented and developed in terms of simple correlations, multiple correlations, correlations via double quantum coherencies. Experiments with light water are then described, and different experiments are performed to determine the structure and conformation of each unit. Bipolar interactions are then addressed to highlight proximities between atoms [fr

USING MAGNETIC MOMENTS TO UNVEIL THE NUCLEAR STRUCTURE OF LOW-SPIN NUCLEAR STATES

Directory of Open Access Journals (Sweden)

Diego A. Torres

2011-07-01

Full Text Available The experimental study of magnetic moments for nuclear states near the ground state, I ≤ 2, provides a powerful tool to test nuclear structure models. Traditionally, the use of Coulomb excitation reactions has been used to study low spin states, mostly I = 2. The use of alternative reaction channels, such as α transfer, for the production of radioactive species that, otherwise, will be only produced in future radioactive beam facilities has proved to be an alternative to measure not only excited states with I > 2, but to populate and study long-live radioactive nuclei. This contribution will present the experimental tools and challenges for the use of the transient field technique for the measurement of g factors in nuclear states with I ≤ 2, using Coulomb excitation and α-transfer reactions. Recent examples of experimental results near the N = 50 shell closure, and the experimental challenges for future implementations with radioactive beams, will be discussed.

Technology transfer from nuclear research

International Nuclear Information System (INIS)

1989-01-01

A number of processes, components and instruments developed at the Bhabha Atomic Research Centre, (BARC), Bombay, find application in industry and are available for transfer to private or public sector undertakings for commercial exploitation. The Technology Transfer Group (TTG) constituted in January 1980 identifies such processes and prototypes which can be made available for transfer. This catalogue contains brief descriptions of such technologies and they are arranged under three groups, namely, Group A containing descriptions of technologies already transferred, Group B containing descriptions of technologies ready for transfer and Group C containing descriptions of technology transfer proposals being processed. The position in the above-mentioned groups is as on 1 March 1989. The BARC has also set up a Technology Corner where laboratory models and prototypes of instruments, equipment and components are displayed. These are described in the second part of the catalogue. (M.G.B.)

Analysis of heat and mass transfers in two-phase flow by coupling optical diagnostic techniques

Energy Technology Data Exchange (ETDEWEB)

Lemaitre, P.; Porcheron, E. [Institut de Radioprotection et de Surete Nucleaire, Saclay (France)

2008-08-15

During the course of a hypothetical accident in a nuclear power plant, spraying might be actuated to reduce static pressure in the containment. To acquire a better understanding of the heat and mass transfers between a spray and the surrounding confined gas, non-intrusive optical measurements have to be carried out simultaneously on both phases. The coupling of global rainbow refractometry with out-of-focus imaging and spontaneous Raman scattering spectroscopy allows us to calculate the local Spalding parameter B{sub M}, which is useful in describing heat transfer associated with two-phase flow. (orig.)

Analysis of heat and mass transfers in two-phase flow by coupling optical diagnostic techniques

International Nuclear Information System (INIS)

Lemaitre, P.; Porcheron, E.

2008-01-01

During the course of a hypothetical accident in a nuclear power plant, spraying might be actuated to reduce static pressure in the containment. To acquire a better understanding of the heat and mass transfers between a spray and the surrounding confined gas, non-intrusive optical measurements have to be carried out simultaneously on both phases. The coupling of global rainbow refractometry with out-of-focus imaging and spontaneous Raman scattering spectroscopy allows us to calculate the local Spalding parameter B M , which is useful in describing heat transfer associated with two-phase flow. (orig.)

State of the art report: Underwater examination techniques for spent nuclear fuels

International Nuclear Information System (INIS)

Chun, Yong Bum

1997-06-01

In these days, much efforts are being put to increase the final discharge burnup of PWR fuels. Therefore, the necessity of the inspection of irradiated nuclear fuels assembly during the the refueling outage is greatly increased to evaluate the safe operation and soundness of fuel assemblies in their next cycles in core, and apply the results for safe operation and effective core management. The necessity to evaluate the irradiation performance of indigenous nuclear fuels pushes the relative researchers to the development of on-site fuel inspection techniques and devices which can perform the underwater inspection and measurement of irradiated nuclear fuels during refueling outage. To ensure the technologies, the status of in situ underwater fuel inspection techniques and equipment were investigated and reviewed. Those information provides the fuel inspection capability to evaluate and certificate the performance and integrity of nuclear fuels which leads to the safe operation of NPP. (author). 49 refs., 52 figs

Nuclear techniques in schistosomiasis: Towards a schistosome vaccine

International Nuclear Information System (INIS)

Taylor, D.W.

1986-01-01

The paper reviews recent advances in schistosome research achieved through the application of nuclear techniques and aimed at the development of a vaccine. Two principal areas are discussed: first, immune effector mechanisms; and secondly, the application of hybridoma and recombinant DNA technology to the problem of production of large quantities of parasite antigens suitable for inclusion in an experimental vaccine. (author)

Nuclear techniques in Australian animal production

International Nuclear Information System (INIS)

1976-01-01

In tropical and sub-tropical regions, the production of domestic animals is frequently depressed by the climatic and ecological conditions. These negative effects can be overcome to a great extent by improved methods of animal and land management. In animal research, nuclear techniques are playing an important role in the study of different aspects of nutrition, metabolism, reproduction and health of domestic animals. In response to the need expressed by Member States for more information on these techniques, the Joint FAO/IAEA Division of Atomic Energy in Food and Agriculture and the IAEA's Division of Technical Assistance organized a study tour to Australia, a country which has developed considerable expertise in agricultural and animal research. The purpose of the study tour was to enable veterinary and animal scientists and administrators from developing countries in Asia and the Far East to observe at first hand the ways in which animal production, particularly meat, milk and wool, can be increased in tropical and sub-tropical areas. Fourteen senior scientists and research directors from seven Asian countries (Bangladesh, India, Republic of Korea, Malaysia, Philippines, Sri Lanka and Thailand) participated. The counterpart organizations in Australia were the Australian Development Assistance Agency (ADAA) and the Commonwealth Scientific and Industrial Research Organization (CSIRO). The chief programmer and co-ordinator of the study tour was John E. Vercoe, officer-in-charge of CSIRO's Tropical Cattle Research Centre in Rockhampton, and a former IAEA staff member. The tour was financed by the United Nations Development Programme. The participants visited research facilities of universities, national and state laboratories and commercial cattle producers. The tour started at Sydney and proceeded north along the east coast of Australia to Townsville. On the way, major stops were made in Armidale, Grafton, Wollongbar, Brisbane and Rockhampton. In Rockhampton, a

Impeding Xist expression from the active X chromosome improves mouse somatic cell nuclear transfer

NARCIS (Netherlands)

Inoue, K.; Kohda, T.; Sugimoto, M.; Sado, T.; Ogonuki, N.; Matoba, S.; Shiura, H.; Ikeda, R.; Mochida, K.; Fujii, T.; Sawai, K.; Otte, A.P.; Tian, X.C.; Yang, X.; Ishino, F.; Abe, K.; Ogura, A.

2010-01-01

Cloning mammals by means of somatic cell nuclear transfer (SCNT) is highly inefficient because of erroneous reprogramming of the donor genome. Reprogramming errors appear to arise randomly, but the nature of nonrandom, SCNT-specific errors remains elusive. We found that Xist, a noncoding RNA that

Scoping Study of Machine Learning Techniques for Visualization and Analysis of Multi-source Data in Nuclear Safeguards

Energy Technology Data Exchange (ETDEWEB)

Cui, Yonggang

2018-05-07

In implementation of nuclear safeguards, many different techniques are being used to monitor operation of nuclear facilities and safeguard nuclear materials, ranging from radiation detectors, flow monitors, video surveillance, satellite imagers, digital seals to open source search and reports of onsite inspections/verifications. Each technique measures one or more unique properties related to nuclear materials or operation processes. Because these data sets have no or loose correlations, it could be beneficial to analyze the data sets together to improve the effectiveness and efficiency of safeguards processes. Advanced visualization techniques and machine-learning based multi-modality analysis could be effective tools in such integrated analysis. In this project, we will conduct a survey of existing visualization and analysis techniques for multi-source data and assess their potential values in nuclear safeguards.

Applications of ultrasonic phased array technique during fabrication of nuclear tubing and other components for the Indian nuclear power program

International Nuclear Information System (INIS)

Kapoor, K.

2015-01-01

Ultrasonic phased array technique has been applied in fabrication of nuclear fuel and structural at NFC. The integrity of the nuclear fuel and structural components is most crucial as they are exposed to severe environment during operation leading to rapid degradation of its properties during its lifecycle. Nuclear Fuel Complex has mandate for the fabrication of the nuclear fuel and core structurals for Indian PHWRs/BWR, sub-assemblies for the PFBR and steam generator tubing for PFBR and PHWRs which are the most critical materials for the Indian Nuclear Power program. NDE during fabrication of these materials is thus most crucial as it provides the confidence to the designer for safe operation during its lifetime. Many of these techniques have to be developed in-house to meet unique requirements of high sensitivity, resolution and shape of the components. Some of the advancements in the NDE during the fabrication include use of ultrasonic phased array which is detailed in this paper

The cell agglutination agent, phytohemagglutinin-L, improves the efficiency of somatic nuclear transfer cloning in cattle (Bos taurus).

Science.gov (United States)

Du, Fuliang; Shen, Perng-Chih; Xu, Jie; Sung, Li-Ying; Jeong, B-Seon; Lucky Nedambale, Tshimangadzo; Riesen, John; Cindy Tian, X; Cheng, Winston T K; Lee, Shan-Nan; Yang, Xiangzhong

2006-02-01

One of the several factors that contribute to the low efficiency of mammalian somatic cloning is poor fusion between the small somatic donor cell and the large recipient oocyte. This study was designed to test phytohemagglutinin (PHA) agglutination activity on fusion rate, and subsequent developmental potential of cloned bovine embryos. The toxicity of PHA was established by examining its effects on the development of parthenogenetic bovine oocytes treated with different doses (Experiment 1), and for different durations (Experiment 2). The effective dose and duration of PHA treatment (150 microg/mL, 20 min incubation) was selected and used to compare membrane fusion efficiency and embryo development following somatic cell nuclear transfer (Experiment 3). Cloning with somatic donor fibroblasts versus cumulus cells was also compared, both with and without PHA treatment (150 microg/mL, 20 min). Fusion rate of nuclear donor fibroblasts, after phytohemagglutinin treatment, was increased from 33 to 61% (P cell nuclear donors. The nuclear transfer (NT) efficiency per oocyte used was improved following PHA treatment, for both fibroblast (13% versus 22%) as well as cumulus cells (17% versus 34%; P cloned embryos, both with and without PHA treatment, were subjected to vitrification and embryo transfer testing, and resulted in similar survival (approximately 90% hatching) and pregnancy rates (17-25%). Three calves were born following vitrification and embryo transfer of these embryos; two from the PHA-treated group, and one from non-PHA control group. We concluded that PHA treatment significantly improved the fusion efficiency of somatic NT in cattle, and therefore, increased the development of cloned blastocysts. Furthermore, within a determined range of dose and duration, PHA had no detrimental effect on embryo survival post-vitrification, nor on pregnancy or calving rates following embryo transfer.

Analysis of archaeological pieces with nuclear techniques; Analisis de piezas arqueologicas con tecnicas nucleares

Energy Technology Data Exchange (ETDEWEB)

Tenorio, D [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

2002-07-01

In this work nuclear techniques such as Neutron Activation Analysis, PIXE, X-ray fluorescence analysis, Metallography, Uranium series, Rutherford Backscattering for using in analysis of archaeological specimens and materials are described. Also some published works and thesis about analysis of different Mexican and Meso american archaeological sites are referred. (Author)

Heat transfer enhancement

International Nuclear Information System (INIS)

Hasatani, Masanobu; Itaya, Yoshinori

1985-01-01

In order to develop energy-saving techniques and new energy techniques, and also most advanced techniques by making industrial equipment with high performance, heat transfer performance frequently becomes an important problem. In addition, the improvement of conventional heat transfer techniques and the device of new heat transfer techniques are often required. It is most proper that chemical engineers engage in the research and development for enhancing heat transfer. The research and development for enhancing heat transfer are important to heighten heat exchange efficiency or to cool equipment for preventing overheat in high temperature heat transfer system. In this paper, the techniques of enhancing radiative heat transfer and the improvement of radiative heat transfer characteristics are reported. Radiative heat transfer is proportional to fourth power of absolute temperature, and it does not require any heat transfer medium, but efficient heat-radiation converters are necessary. As the techniques of enhancing radiative heat transfer, the increase of emission and absorption areas, the installation of emissive structures and the improvement of radiative characteristics are discussed. (Kako, I.)