WorldWideScience

Sample records for nuclear industry update

  1. Fitness for duty in the nuclear industry: Update of the technical issues 1996

    International Nuclear Information System (INIS)

    Durbin, N.; Grant, T.

    1996-05-01

    The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about which there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC's rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC

  2. Fitness for duty in the nuclear industry: Update of the technical issues 1996

    Energy Technology Data Exchange (ETDEWEB)

    Durbin, N.; Grant, T. [eds.] [Battelle Seattle Research Center, WA (United States)

    1996-05-01

    The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about which there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC`s rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC.

  3. Responsability of nuclear industry

    International Nuclear Information System (INIS)

    Cadiz Deleito, J.C.

    1985-01-01

    Since the beginning of nuclear industry, civil responsibility with damages to the public health and properties was a critical problem, because the special conditions of this industry (nuclear accident, damages could be very high but probability of these events is very low). Legal precepts, universally accepted, in the first 60 years for all countries interested in nuclear energy are being revised, then 20 years of experience. The civil responsibility limited is being questioned and indemnities updated. (author)

  4. Uranium industry update

    International Nuclear Information System (INIS)

    Poissonnet, M.

    1994-01-01

    Canada is the world's largest producer of uranium. With stockpiles becoming depleted, new sources of production will soon be needed. Production in Ontario was expected to cease in 1996, leaving decommissioning as the main activity there. Present production in Canada is almost entirely from the Athabasca basin in Saskatchewan, and mainly from three mines, Key Lake and Rabbit Lake (both owned by Cameco and Uranerz), and Cluff Lake (owned by Cogema). Following hearings in 1993, extensions to Cluff Lake and Rabbit Lake, and a new project at McClean Lake (by Minatco) received environmental approval, while the Midwest project as presented by Denison was rejected, but Cogema was revising it (at the time of the conference). An environmental impact statement for Cigar Lake was due to be submitted to the Assessment panel in October 1994. The author regrets that discussion of 'natural analogues' has created confusion between uranium mining and nuclear waste disposal in the public mind. 2 ills

  5. Passive Nuclear Plants Program (UPDATE)

    International Nuclear Information System (INIS)

    Chimeno, M. A.

    1998-01-01

    The light water passive plants program (PCNP), today Advanced Nuclear Power Plants Program (PCNA), was constituted in order to reach the goals of the Spanish Electrical Sector in the field of advanced nuclear power plants, optimize the efforts of all Spanish initiatives, and increase joint presence in international projects. The last update of this program, featured in revision 5th of the Program Report, reflects the consolidation of the Spanish sector's presence in International programs of the advanced power plants on the basis of the practically concluded American ALWR program. Since the beginning of the program , the PCNP relies on financing from the Electrical sector, Ocide, SEPI-Endesa, Westinghouse, General Electric, as well as from the industrial cooperators, Initec, UTE (Initec- Empresarios Agrupados), Ciemat, Enusa, Ensa and Tecnatom. The program is made up of the following projects, already concluded: - EPRI's Advanced Light Water Plants Certification Project - Westinghouse's AP600 Project - General Electric's SBWR Project (presently paralyzed) and ABWR project Currently, the following project are under development, at different degrees of advance: - EPP project (European Passive Plant) - EBWR project (European Advanced Boiling Water Reactor)

  6. Process industry properties in nuclear industry

    International Nuclear Information System (INIS)

    Zheng Hualing

    2005-01-01

    In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)

  7. Spanish nuclear industry

    International Nuclear Information System (INIS)

    1994-01-01

    In this book published to commemorate the twentieth anniversary of the Spanish Nuclear Society, it is included a report on the Spanish Nuclear Industry. The Spanish Companies and Organizations in nuclear world are: CIEMAT, Empresarios Agrupados, ENRESA, ENUSA, ENDESA, Grupo Iberdrola, LAINSA, INITEC AND TECNATOM. Activities, history and research programs of each of them are included

  8. Spain's nuclear components industry

    International Nuclear Information System (INIS)

    Kaibel, E.

    1985-01-01

    Spanish industrial participation in supply of components for nuclear power plants has grown steadily over the last fifteen years. The share of Spanish companies in work for the five second generation nuclear power plants increased to 50% of total capital investments. The necessity to maintain Spanish technology and production in the nuclear field is emphasized

  9. Nuclear industry technology boomerang

    International Nuclear Information System (INIS)

    Scholler, R.W.

    1987-01-01

    The benefits to the medical, pharmaceutical, semiconductor, computer, video, bioscience, laser, defense, and numerous high-tech industries from nuclear technology development fallout are indeed numerous and increase every day. Now those industries have made further progress and improvements that, in return, benefit the nuclear industry. The clean-air and particle-free devices and enclosures needed for protection and decontamination are excellent examples

  10. Nuclear power industry

    International Nuclear Information System (INIS)

    1999-01-01

    This press dossier presented in Shanghai (China) in April 1999, describes first the activities of the Framatome group in the people's republic of China with a short presentation of the Daya Bay power plant and of the future Ling Ao project, and with a description of the technological cooperation with China in the nuclear domain (technology transfers, nuclear fuels) and in other industrial domains (mechanics, oil and gas, connectors, food and agriculture, paper industry etc..). The general activities of the Framatome group in the domain of energy (nuclear realizations in France, EPR project, export activities, nuclear services, nuclear fuels, nuclear equipments, industrial equipments) and of connectors engineering are presented in a second and third part with the 1998 performances. (J.S.)

  11. Nuclear techniques in industry

    International Nuclear Information System (INIS)

    Hammad, F.H.

    1994-01-01

    Nuclear techniques are utilized in almost every industry. The discussion in this paper includes discussions on tracer methods and uses nucleonic control systems technology; non-destructive testing techniques and radiation technology. 1 fig., 2 tabs

  12. Nuclear measurements in industry

    International Nuclear Information System (INIS)

    Rozsa, S.

    1989-01-01

    In this book the author provides a description of nuclear measurements in industry, covering the physical principles, methods, instruments and equipment, and industrial applications. One of the great advantages of industrial nuclear measurements is that their use ensures the optimum use of raw material. The increasing cost of raw materials makes it essential to adhere strictly to the standards and prescriptions related to the product and this is possible only by the application of continuous and accurate measurements. As a result, the importance of nuclear instruments is rapidly growing particularly in fields where the application of alternative methods is not possible. This is illustrated by several practical examples described in the book. Similarly important are nuclear measuring the process control equipment which serve to optimize the use of energy in industrial processes

  13. Nuclear technology review 2005 update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-08-15

    The year 2004 marked the 50th anniversary of civilian nuclear power generation. While the current outlook for nuclear energy remains mixed, there is clearly a sense of rising expectations. Both the OECD International Energy Agency and the IAEA adjusted their medium-term projections for nuclear power upwards. The IAEA now projects 423 - 592 GW(e) of nuclear power installed worldwide in 2030, compared to 366 GW(e) at the end of 2004. This is driven by nuclear power's performance record, by growing energy needs around the world coupled with rising oil and natural gas prices, by new environmental constraints including entry-into-force of the Kyoto Protocol, by concerns about energy supply security in a number of countries, and by ambitious expansion plans in several key countries. National research on advanced reactor designs continues on all reactor categories - water cooled, gas cooled, liquid metal cooled, and hybrid systems. Five members of the US-initiated Generation IV International Forum (GIF) signed a framework agreement on international collaboration in research and development on Generation IV nuclear energy systems in February 2005. The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 23 members. It completed a series of case studies testing its assessment methodology and the final report on the updated INPRO methodology was published in December. The realization of the International Thermonuclear Experimental Reactor, ITER, came closer with the announcement on 28 June 2005 by the ITER parties. The aim of ITER is to demonstrate the scientific and technological feasibility of fusion energy by constructing a functional fusion power plant. Nuclear technology developments are rapid and cover many fields of application. Not all can be covered in this update review, but certain key areas and trends are covered where these are seen to be of significant interest to IAEA Member States, and which are of relevance to and have

  14. Nuclear technology review 2005 update

    International Nuclear Information System (INIS)

    2005-08-01

    The year 2004 marked the 50th anniversary of civilian nuclear power generation. While the current outlook for nuclear energy remains mixed, there is clearly a sense of rising expectations. Both the OECD International Energy Agency and the IAEA adjusted their medium-term projections for nuclear power upwards. The IAEA now projects 423 - 592 GW(e) of nuclear power installed worldwide in 2030, compared to 366 GW(e) at the end of 2004. This is driven by nuclear power's performance record, by growing energy needs around the world coupled with rising oil and natural gas prices, by new environmental constraints including entry-into-force of the Kyoto Protocol, by concerns about energy supply security in a number of countries, and by ambitious expansion plans in several key countries. National research on advanced reactor designs continues on all reactor categories - water cooled, gas cooled, liquid metal cooled, and hybrid systems. Five members of the US-initiated Generation IV International Forum (GIF) signed a framework agreement on international collaboration in research and development on Generation IV nuclear energy systems in February 2005. The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 23 members. It completed a series of case studies testing its assessment methodology and the final report on the updated INPRO methodology was published in December. The realization of the International Thermonuclear Experimental Reactor, ITER, came closer with the announcement on 28 June 2005 by the ITER parties. The aim of ITER is to demonstrate the scientific and technological feasibility of fusion energy by constructing a functional fusion power plant. Nuclear technology developments are rapid and cover many fields of application. Not all can be covered in this update review, but certain key areas and trends are covered where these are seen to be of significant interest to IAEA Member States, and which are of relevance to and have

  15. Nuclear industry chart

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    As part of a survey on Switzerland a pull-out organisation chart is presented of the nuclear industry showing Swiss government bodies and industrial concerns. Their interests, connections with each other and their associations with international and other national organizations and firms are indicated. (U.K.)

  16. Nuclear industry and territories

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2016-01-01

    Nuclear industry being composed of plants, laboratories, nuclear power stations, uranium mines, power lines and fluxes of materials from one facility to another is a strong shaper of the national territory. Contrary to other European countries, French nuclear industry is present all over the national territory. In 64 departments out of 101 there is at least one enterprise whose half of the revenues depends on nuclear activities. The advantage of such a geographical dispersion is when a nuclear activity is given up the social impact is less important: people tend to find a new job in the same region. French Nuclear power plants are generally set in remote places where population density is low and being the first employer by far of the area and being a major contributor to the city revenues, they are perceived as a key element the local population is proud of. In Germany, nuclear power plants are set inside dense industrial regions and appear as an industry just like any other.(A.C.)

  17. Industrial safety glasses -- an update.

    Science.gov (United States)

    Sherr, A E

    1980-02-01

    A review is presented of recent significant developments in industrial protective eyewear. Many of these developments apply to everyday practice. The new plastic protective, prescription, and plano lenses are discussed, and their merits presented. Needs for protection in the ultraviolet and near-infrared portions of the electromagnetic spectrum are described. It is shown that such spectral protection is now available in plastic lenses, but care must be taken to insure that the plastic has the required ultraviolet and near-infrared absorption. Eye protection standards have been improved. Specific changes in the standards are discussed.

  18. Nuclear power industry, 1981

    International Nuclear Information System (INIS)

    1981-12-01

    The intent of this publication is to provide a single volume of resource material that offers a timely, comprehensive view of the nuclear option. Chapter 1 discusses the development of commercial nuclear power from a historical perspective, reviewing the factors and events that have and will influence its progress. Chapters 2 through 5 discuss in detail the nuclear powerplant and its supporting fuel cycle, including various aspects of each element from fuel supply to waste management. Additional dimension is brought to the discussion by Chapters 6 and 7, which cover the Federal regulation of nuclear power and the nuclear export industry. This vast body of thoroughly documented information offers the reader a useful tool in evaluating the record and potential of nuclear energy in the United States

  19. Industrial nuclear property

    International Nuclear Information System (INIS)

    Lepetre, M.

    1976-01-01

    The first requests for patents for the use of nuclear power filed in France in 1939. This paper reviews the regulations on industrial nuclear property in various countries. The patenting system in several socialist countries is characterized by the fact that inventions on the production and use of radioactive materials may not be patented. This equally applies in India. In the United States, this type of invention may be patented except for those involving military uses and which must be notified to the federal authorities. In France, all industrial nuclear property is grouped under the same body, Brevatome, created in 1958, which enables the allocation of rights to be negotiated between the different interested parties, the Atomic Energy Commission (CEA), Electricite de France (EDF) and private industry. Under the Euratom Treaty, all inventions, even those governed by secrecy in Member countries, must be communicated to the Commission of the European Communities. (NEA) [fr

  20. Nuclear Industry in China

    Energy Technology Data Exchange (ETDEWEB)

    Cong, W., E-mail: eweike@263.net.cn [Bureau of Geology, China National Nuclear Corporation, Beijing (China)

    2014-05-15

    The paper presents an overview of the present situation and future plans for the development of nuclear power in China. In particular it looks at the present electricity generation system, future demand and plans for nuclear power plants to meet the increasing demands for electrical power in the country. It summarizes the state of uranium exploration activities and planned production of uranium resources, both nationally and internationally. In addition, it provides a brief overview of the existing administrative situation in the nuclear power industry in China and sets out the main challenges to future development. (author)

  1. Nuclear weapons industry

    International Nuclear Information System (INIS)

    Bertsch, K.A.; Shaw, L.S.

    1984-01-01

    This unique study was written specifically as a reference source for institutional investors concerned about the threat posed to their stock portfolios by the debate over nuclear arms production. The authors focus their analysis on the 26 leading companies in the field. The perspective is neutral and refreshing. Background information on strategic policy, arms control and disarmament, and the influence of the industry on defense policy and the economy is presented rationally. The study also discusses the economic significance of both the conversion from military to civilian production and nuclear freeze initiatives. An appendix contains a fact-filled guide to nuclear weapon systems

  2. Industrial nuclear gauges

    International Nuclear Information System (INIS)

    Bennerstedt, T.

    1986-01-01

    A great number of industrial nuclear gauges are used in Sweden. The administrative routines for testing, approval and licensing are briefly described. Safety standards, including basic ICRP criteria, are summarized and a theoretical background to the various measuring techniques is given. Numerous practical examples are given. (author)

  3. Nuclear data sheets update for A = 197

    Energy Technology Data Exchange (ETDEWEB)

    Chunmei, Zhou [Chinese Nuclear Data Center, Beijing, BJ (China)

    1996-06-01

    The Nuclear Data Sheet for A = 197 has been carried out on the basis of the nuclear reaction and decay experiments leading to all the nuclei with mass number A = 197 since cutoff date of the last evaluation, December 1989. Most evaluation data have been updated or revised. The nuclei of updated data mainly are {sup 197}Hg, {sup 197}Pb, {sup 197}Bi and {sup 197}Po. The adopted levels and adopted gamma radiations for all nuclei are shown in the tables.

  4. Industry plots nuclear revival

    International Nuclear Information System (INIS)

    Nogee, A.

    1984-01-01

    A successful revival of the nuclear power industry will require standardization and a reduction in the number of companies managing construction, according to Atomic Industrial Forum spokesmen. In describing the concept of a few superutilities to build nuclear plants, they emphasize the need for a nuclear culture among construction management. Future plant designs emphasize small scale, with design, engineering, licensing, financing, operator training, and paperwork completed before the sale. Utilities continue to pursue economy-of-scale despite the evidence that small-scale reactors can be economical and are more appropriate for fluctuating demand growth. Financiers want more say in construction plans in the future, while utilities want to establish generating subsidiaries for wholesale power sales

  5. The World Nuclear Industry Status Report 2013

    International Nuclear Information System (INIS)

    Schneider, Mycle; Froggatt, Antony; Hosokawa, Komei; Thomas, Steve; Yamaguchi, Yukio; Hazemann, Julie; Bradford, Peter A.

    2013-07-01

    Two years after the Fukushima disaster started unfolding on 11 March 2011, its impact on the global nuclear industry has become increasingly visible. Global electricity generation from nuclear plants dropped by a historic 7 percent in 2012, adding to the record drop of 4 percent in 2011. This World Nuclear Industry Status Report 2013 (WNISR) provides a global overview of the history, the current status and the trends of nuclear power programs worldwide. It looks at nuclear reactor units in operation and under construction. Annex 1 provides 40 pages of detailed country-by-country information. A specific chapter assesses the situation in potential newcomer countries. For the second time, the report looks at the credit-rating performance of some of the major nuclear companies and utilities. A more detailed chapter on the development patterns of renewable energies versus nuclear power is also included. Annex 6 provides an overview table with key data on the world nuclear industry by country. The 2013 edition of the World Nuclear Industry Status Report also includes an update on nuclear economics as well as an overview of the status, on-site and off-site, of the challenges triggered by the Fukushima disaster. However, this report's emphasis on recent post-Fukushima developments should not obscure an important fact: as previous editions (see www.WorldNuclearReport.org) detail, the world nuclear industry already faced daunting challenges long before Fukushima, just as the U.S. nuclear power industry had largely collapsed before the 1979 Three Mile Island accident. The nuclear promoters' invention that a global nuclear renaissance was flourishing until 3/11 is equally false: Fukushima only added to already grave problems, starting with poor economics. The performance of the nuclear industry over the year from July 2012 to July 2013 is summed up in this report

  6. The World Nuclear Industry Status Report 2004

    International Nuclear Information System (INIS)

    Schneider, Mycle; Froggatt, Antony

    2004-12-01

    Fifty years ago, in September 1954, the head of the US Atomic Energy Commission stated that nuclear energy would become 'too cheap to meter': The cost to produce energy by nuclear power plants would be so low that the investment into electricity meters would not be justified. By coincidence the US prophecy came within three months of the announcement of the world's first nuclear power plant being connected to the grid in.. the then Soviet Union. In June 2004, the international nuclear industry celebrated the anniversary of the grid connection at the site of the world's first power reactor in Obninsk, Russia, under the original slogan '50 Years of Nuclear Power - The Next 50 Years'. This report aims to provide a solid basis for analysis into the prospects for the nuclear power industry. Twelve years ago, the Worldwatch Institute in Washington, WISE-Paris and Greenpeace International published the World Nuclear Industry Status Report 1992. In the current international atmosphere of revival of the nuclear revival debate - it has been a periodically recurring phenomenon for the past twenty years - two of the authors of the 1992 report, now independent consultants, have carried out an updated review of the status of the world nuclear industry. The performance of the nuclear industry over the past year is summed up in this report

  7. Nuclear Industry Family Study

    International Nuclear Information System (INIS)

    1993-01-01

    This is a copy of the U.K.A.E.A. Question and Answer brief concerning an epidemiological study entitled the Nuclear Industry Family Study, to investigate the health of children of AEA, AWE, and BNFL Workers. The study is being carried out by an independent team of medical research workers from the London School of Hygiene and Tropical Medicine, and the Imperial Cancer Research Fund. (UK)

  8. News from nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    2008-01-01

    A cooperation agreement has been signed between Indian and French governments concerning energy and research. This agreement opens the Indian market to Areva for the supply of power reactors. Areva will face Russian and American competitors. Areva is already present in India in the sectors of power transmission and distribution, it employs 3500 people and operates 8 industrial plants. Areva and Northrop Grumman have signed an agreement to build the biggest site on American soil dedicated to the manufacturing of big nuclear components like reactor vessels, steam generators and pressurizers. An opinion poll shows that 78% Americans favor the use of nuclear energy for producing electricity, while 24% are opposed to it and that nuclear power plants are considered safe by 78% of the population. The Areva-Bechtel corporation has signed an agreement with Unistar Nuclear Energy for doing the preliminary studies for the construction of an EPR near the Calvert Cliffs site. More than 500 engineers are working on the project that benefit from the feedback experience of 4 EPR that are presently being built in Finland, France and China. The European Commission wants the European Union to play a major role in nuclear safety, a task group has been created whose purpose is to define new regulations illustrating common priorities and approaches for unifying national nuclear safety standards among the member states. (A.C.)

  9. Nuclear industry almanac v.1

    International Nuclear Information System (INIS)

    Greenhalgh, G.; Jeffs, E.

    1982-01-01

    Nuclear Industry Almanac. National energy profiles of 17 Western European countries are given, concentrating on electricity supply and the role nuclear power plays in meeting the demand for electric power. The nuclear industries of Austria, Belgium, Finland, France, Germany, Italy, the Netherlands, Spain, Sweden, Switzerland and the United Kingdom are described and addresses of establishments and industries are listed. (U.K.)

  10. Pumps for nuclear industry

    International Nuclear Information System (INIS)

    Tanguy, L.

    1978-01-01

    In order to meet the requirements of nuclear industry for the transfer of corrosive, toxic, humidity sensitive or very pure gases, different types of pumps were developped and commercialized. Their main characteristics are to prevent pollution of the transfered fluid by avoiding any contact between this fluid and the lubricated parts of the machine, and to prevent a contamination of the atmosphere or of the fluid by a total tightness. Patellar pumps have been particularly developped because the metallic bellows are quite reliable and resistant in this configuration. Two types are described: patellar pumps without friction and barrel pumps whose pistons are provided with rings sliding in the cylinders without lubrication [fr

  11. Nuclear industry will soon surface

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    The Japan Atomic Industrial Forum has carried out the annual survey of nuclear industry from the very inception of the development of nuclear power in Japan. The aim is to research and analyze nuclear-related expenditures, sales and manpower, as well as the future prospect of mining and manufacturing industries, electric utilities, trading companies and other related industries. The 19th fact-finding survey investigated into the actual conditions of the nuclear industry from April, 1977, to March, 1978. The number of companies surveyed increased by 75 from the previous year to 1,244, of which 883 or 71% responded to the questions. 501 companies did the business in the field of nuclear power. The first thing to be pointed out about the economic conditions of the nuclear industry is that the nuclear related expenditures increased in electric utilities, mining and manufacturing industries and trading companies, and exceeded 1 trillion yen mark for the first time in the private sector. It is likely that the current nuclear-related activities of mining and manufacturing industries will soon increase, but it will not be easy to wipe off the cumulative deficit of the industries. The employees increased by more than 7% in the nuclear-related sectors of electric utilities and mining and manufacturing industries. The facilities of nuclear supply industry were operated at the average rate of 50%. (Kako, I.)

  12. Obsolescence in nuclear industry

    International Nuclear Information System (INIS)

    Mondal, U.

    2000-01-01

    Most nuclear plants around the world are roughly 15 to 30 years old. The design and procurement of CANDU plants took place from the late 60's to mid 80's (i.e., 20 to 30 years vintage). Most equipment originally installed in these plants is obsolete or the manufactures are out of business or their production has been discontinued due to technological evolution. In order to maintain operation of nuclear plants with safety integrity and commercial viability, certain spare parts must be available at the plant all the time. The objective of this paper is to identify an optimum, cost-effective approach that solves obsolescence problem efficiently and without duplicating efforts. The Nuclear Utility Obsolescence Group (NUOG) has embarked upon the following major tasks: Developing a Guideline for use by the utilities that addresses obsolescence; Collection of obsolescence data in a database (Web-based) to be shared by all members; Motivation of the suppliers to engage them in obsolescence solutions; Increase in awareness among the utility management to consider obsolescence as a priority issue and allocate funds to address them pro-actively; and Coordination with other industry groups (EPRI, INPO, NEI, BWROG etc.) to avoid duplication of effort in obsolescence resolution process. The NUOG strategy is based upon the principles of sharing. It advocates sharing of obsolescence solutions and concerns among the utilities. Candu Owners Group Inc. (COG) has initiated self-assessment of obsolescence in the members' plants. The purpose of self-assessment is to provide baseline information that would help identification of obsolescence and coordination of their solutions. The following areas are covered in the self-assessment initiative: Identification of obsolete components in selected systems in the plant. Assess effectiveness of the current obsolescence identification process and in resolution of obsolescence Issues in the plant. Identification of common Candu plant design

  13. Nuclear technology review 2003 update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-09-01

    Worldwide there were 441 nuclear power plants (NPPs) operating at the end of 2002.These supplied 16% of global electricity generation in 2002, down slightly from 16.2% in 2001.1 Table 1 summarizes world nuclear experience as of the end of 2002. The global energy availability factor for NPPs rose to 83.4% in 2001, from 82.1% in 2000 and 74.2% in 1991. In 2002, upratings calculated from data on the IAEA's Power Reactor Information System (PRIS) totalled approximately 672 MW(e), of which the United States of America accounted for 574 MW(e) and the United Kingdom accounted for 98 MW(e).The United States Nuclear Regulatory Commission (NRC) expects applications for 2270 MW(e) worth of upratings over the next five years. Six new NPPs were connected to the grid in 2000, three in 2001, and six in 2002. There were three retirements in 2000: Chernobyl-3 in Ukraine and two units at Hinkley Point A in the United Kingdom.There were no retirements in 2001 and four in 2002:Kozloduy-1 and -2 in Bulgaria and Bradwell units A and B in the UK. In 2002, construction started on seven new NPPs: six in India and one in the Democratic People's Republic of Korea. This issue covers the following topics: Medium-Term Projections; Sustainable Development; Resources And Fuel; Decommissioning; Advanced Designs; Research Reactors; Waste From Non-Power Applications; Nuclear Knowledge; Matters Of Interest To The IAEA Arising From The World Summit On Sustainable Development; International Project On Innovative Nuclear Reactors And Fuel Cycles (INPRO); Knowledge Management; Key Commitments, Targets And Timetables From The Johannesburg Plan Of Implementation; Management Of The Natural Resource Base.

  14. Nuclear technology review 2003 update

    International Nuclear Information System (INIS)

    2003-09-01

    Worldwide there were 441 nuclear power plants (NPPs) operating at the end of 2002.These supplied 16% of global electricity generation in 2002, down slightly from 16.2% in 2001.1 Table 1 summarizes world nuclear experience as of the end of 2002. The global energy availability factor for NPPs rose to 83.4% in 2001, from 82.1% in 2000 and 74.2% in 1991. In 2002, upratings calculated from data on the IAEA's Power Reactor Information System (PRIS) totalled approximately 672 MW(e), of which the United States of America accounted for 574 MW(e) and the United Kingdom accounted for 98 MW(e).The United States Nuclear Regulatory Commission (NRC) expects applications for 2270 MW(e) worth of upratings over the next five years. Six new NPPs were connected to the grid in 2000, three in 2001, and six in 2002. There were three retirements in 2000: Chernobyl-3 in Ukraine and two units at Hinkley Point A in the United Kingdom.There were no retirements in 2001 and four in 2002:Kozloduy-1 and -2 in Bulgaria and Bradwell units A and B in the UK. In 2002, construction started on seven new NPPs: six in India and one in the Democratic People's Republic of Korea. This issue covers the following topics: Medium-Term Projections; Sustainable Development; Resources And Fuel; Decommissioning; Advanced Designs; Research Reactors; Waste From Non-Power Applications; Nuclear Knowledge; Matters Of Interest To The IAEA Arising From The World Summit On Sustainable Development; International Project On Innovative Nuclear Reactors And Fuel Cycles (INPRO); Knowledge Management; Key Commitments, Targets And Timetables From The Johannesburg Plan Of Implementation; Management Of The Natural Resource Base

  15. Nuclear energy and the nuclear industry

    International Nuclear Information System (INIS)

    1979-01-01

    These notes have been prepared by the Department of Energy to provide information and to answer questions often raised about nuclear energy and the nuclear industry and in the hope that they will contribute to the public debate about the future of nuclear energy in the UK. The subject is dealt with under the headings; contribution of nuclear power, energy forecasts, nuclear fuels and reactor types, cost, thermal reactor strategy, planning margin, safety, nuclear licensing, unlike an atomic bomb, radiation, waste disposal, transport of nuclear materials, emergency arrangements at nuclear sites, siting of nuclear stations, security of nuclear installations, world nuclear programmes, international regulation and non-proliferation, IAEA safeguards arrangements in the UK, INFCE, and uranium supplies. (U.K.)

  16. Industrial Applications of Nuclear Energy

    International Nuclear Information System (INIS)

    2017-01-01

    This publication provides a detailed overview of the potential use of nuclear energy for industrial systems and/or processes which have a strong demand for process heat/steam and power, and on the mapping of nuclear power reactors proposed for various industrial applications. It describes the technical concepts for combined nuclear-industrial complexes that are being pursued in various Member States, and presents the concepts that were developed in the past to be applied in connection with some major industries. It also provides an analysis of the energy demand in various industries and outlines the potential that nuclear energy may have in major industrial applications such as process steam for oil recovery and refineries, hydrogen generation, and steel and aluminium production. The audience for this publication includes academia, industry, and government agencies.

  17. Q2/Q3 2016 Solar Industry Update

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, David; Boff, Daniel; Margolis, Robert

    2016-10-11

    This technical presentation provides an update on the major trends that occurred in the solar industry in the Q2 and Q3 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  18. Q2/Q3 2017 Solar Industry Update

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, David J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hoskins, Jack [Dept. of Energy (DOE), Washington DC (United States); Margolis, Robert M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-10-24

    This technical presentation provides an update on the major trends that occurred in the solar industry in Q2 and Q3 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  19. Q4 2016/Q1 2017 Solar Industry Update

    Energy Technology Data Exchange (ETDEWEB)

    Margolis, Robert; Feldman, David; Boff, Daniel

    2017-05-17

    This technical presentation provides an update on the major trends that occurred in the solar industry in the fourth quarter of 2016 and the first quarter of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  20. Q3/Q4 2016 Solar Industry Update

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, David; Boff, Daniel; Margolis, Robert

    2016-12-21

    This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  1. Q4 2017/Q1 2018 Solar Industry Update

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, David J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hoskins, Jack [U.S. Department of Energy

    2018-05-16

    This technical presentation provides an update on the major trends that occurred in the solar industry in Q4 2017 and Q1 2018. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  2. Q3/Q4 2017 Solar Industry Update

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, David J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hoskins, Jack [Dept. of Energy (DOE), Washington DC (United States); Margolis, Robert M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2018-02-15

    This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  3. The nuclear industry in Canada

    International Nuclear Information System (INIS)

    Anderson, D.; Broughton, W.

    1992-01-01

    The nuclear industry in Canada comprises three identifiable groups: (1) Atomic Energy of Canada Limited (AECL), (2) electrical utilities that use nuclear power plants, (3) private engineering and manufacturing companies. At the end of World War II, AECL was charged with investigating and developing peaceful uses of atomic power. Included in the results is the Canada deuterium uranium (CANDU) reactor, a peculiarly Canadian design. The AECL maintains research capability and operates as the prime nuclear steam supply system supplier. Utilities in three Canadian provinces operate nuclear power plants, New Brunswick, Quebec, and Ontario, with the majority in Ontario. From the beginning of the nuclear program in Canada, private industry has been an important partner to AECL and the utilities, filling roles as manufacturing subcontractors and as component designers. The prime objective of this paper is to illuminate the role of private industry in developing and maintaining a competitive world-class nuclear industry

  4. An updated nuclear criticality slide rule

    International Nuclear Information System (INIS)

    Hopper, C.M.; Broadhead, B.L.

    1998-04-01

    This Volume 2 contains the functional version of the updated nuclear criticality slide rule (more accurately, sliding graphs) that is referenced in An Updated Nuclear Criticality Slide Rule: Technical Basis, NUREG/CR-6504, Vol. 1 (ORNL/TM-13322/V1). This functional slide rule provides a readily usable open-quotes in-handclose quotes method for estimating pertinent nuclear criticality accident information from sliding graphs, thereby permitting (1) the rapid estimation of pertinent criticality accident information without laborious or sophisticated calculations in a nuclear criticality emergency situation, (2) the appraisal of potential fission yields and external personnel radiation exposures for facility safety analyses, and (3) a technical basis for emergency preparedness and training programs at nonreactor nuclear facilities. The slide rule permits the estimation of neutron and gamma dose rates and integrated doses based upon estimated fission yields, distance from the fission source, and time-after criticality accidents for five different critical systems. Another sliding graph permits the estimation of critical solution fission yields based upon fissile material concentration, critical vessel geometry, and solution addition rate. Another graph provides neutron and gamma dose-reduction factors for water, steel, and concrete. Graphs from historic documents are provided as references for estimating critical parameters of various fissile material systems. Conversion factors for various English and metric units are provided for quick reference

  5. The nuclear industry in France

    International Nuclear Information System (INIS)

    Degot, D.

    1981-02-01

    The French nuclear industry is organized around the following main participants: - The E.D.F., owners, industrial architects and operators of the power stations, - The C.E.A. for research and development, with its subsidiary the COGEMA, who deal with all problems involving the fuel cycle, - The Industry with FRAMATOME in charge of the manufacture of nuclear boilers, and ALSTHOM-ATLANTIQUE in charge of turbo-generator units. This paper deals with the activities covered by FRAMATOME and its industrial environment. The standardization of PWR power stations built by French industry and the possibilities of exporting PWR power stations are given a brief mention [fr

  6. The World Nuclear Industry Status Report 2017

    International Nuclear Information System (INIS)

    Schneider, Mycle; Froggatt, Antony; Hazemann, Julie; Katsuta, Tadahiro; Ramana, M.V.; Rodriguez, Juan C.; Ruedinger, Andreas; Stienne, Agnes

    2017-09-01

    The World Nuclear Industry Status Report 2017 (WNISR2017) provides a comprehensive overview of nuclear power plant data, including information on operation, production and construction. The WNISR assesses the status of new-build programs in current nuclear countries as well as in potential newcomer countries. The WNISR2017 edition includes a new assessment from an equity analyst view of the financial crisis of the nuclear sector and some of its biggest industrial players. The Fukushima Status Report provides not only an update on onsite and offsite issues six years after the beginning of the catastrophe, but also the latest official and new independent cost evaluations of the disaster. Focus chapters provide in-depth analysis of France, Japan, South Korea, the United Kingdom and the United States. The Nuclear Power vs. Renewable Energy chapter provides global comparative data on investment, capacity, and generation from nuclear, wind and solar energy. Finally, Annex 1 presents a country-by-country overview of all other countries operating nuclear power plants

  7. Nuclear engine system simulation (NESS) program update

    International Nuclear Information System (INIS)

    Scheil, C.M.; Pelaccio, D.G.; Petrosky, L.J.

    1993-01-01

    The second phase of development of a Nuclear Thermal Propulsion (NTP) engine system design analysis code has been completed. The standalone, versatile Nuclear Engine System Simulation (NESS) code provides an accurate, detailed assessment of engine system operating performance, weight, and sizes. The critical information is required to support ongoing and future engine system and stage design study efforts. This recent development effort included incorporation of an updated solid-core nuclear thermal reactor model that yields a reduced core weight and higher fuel power density when compared to a NERVA type reactor. NESS can now analyze expander, gas generator, and bleed cycles, along with multi-redundant propellant pump feed systems. Performance and weight of efficient multi-stage axial turbopump can now be determined, in addition to the traditional centrifugal pump

  8. WIMS nuclear data library and its updating

    Energy Technology Data Exchange (ETDEWEB)

    Bakhtyar, S; Salahuddin, A; Arshad, M

    1995-10-01

    This report gives a brief overview of the status of reactor physics computer code WIMS-D/4 and its library. It presents the details of WIMS-D/4 Library Update Project (WLUP), initiated by International Atomic Energy Agency (IAEA) with the goal of providing updated nuclear data library to the user of WIMS-D/4. The WLUP was planned to be executed in several stages. In this report the calculations performed for the first stage are presented. A number of benchmarks for light water and heavy water lattices proposed by IAEA have been analysed and the results have been compared with the average of experimental values, the IAEA reference values and the average of calculated results from different international laboratories. (author) 8 figs.

  9. WIMS nuclear data library and its updating

    International Nuclear Information System (INIS)

    Bakhtyar, S.; Salahuddin, A.; Arshad, M.

    1995-10-01

    This report gives a brief overview of the status of reactor physics computer code WIMS-D/4 and its library. It presents the details of WIMS-D/4 Library Update Project (WLUP), initiated by International Atomic Energy Agency (IAEA) with the goal of providing updated nuclear data library to the user of WIMS-D/4. The WLUP was planned to be executed in several stages. In this report the calculations performed for the first stage are presented. A number of benchmarks for light water and heavy water lattices proposed by IAEA have been analysed and the results have been compared with the average of experimental values, the IAEA reference values and the average of calculated results from different international laboratories. (author) 8 figs

  10. The financing of nuclear industry

    International Nuclear Information System (INIS)

    Cazauran, B.

    1978-01-01

    Having first recalled the usual financing rules related to the economic activities, the author analyses the applying of those rules in the nuclear field, taking into account the specific characteristics of this industrial branch [fr

  11. Nuclear industry takes off

    International Nuclear Information System (INIS)

    Du Plessis, A.; Stevens, R.C.B.

    1982-01-01

    For more than a decade irradiation sterilisation of medical and pharmaceutical products proved a highly successful semi-commercial operation at Pelindaba, until it made way recently for the first full-scale radiation processing industry in SA - a classic case of science transferring technology to industry

  12. U.S. nuclear industry

    International Nuclear Information System (INIS)

    Sherman, R.

    1979-01-01

    At present, 72 power reactors are in the condition of being able to operate in U.S., and the total installation capacity has reached 55 million kW, which is equivalent to about 9.5% of the total power generation capacity in U.S. The nuclear power stations produced 12.5% of the total electricity consumption in 1978. Especially in the north eastern part of the U.S., the nuclear power generation occupied 42% of the total power generation at the time of recent peak load, and 47 million barrels of crude oil and 517 million dollars of foreign currency were able to be saved. Moreover, 96 plants amounting to 105 million kW are under construction, and 30 plants of 35 million kW were ordered. Electric power companies, nuclear reactor makers, nuclear fuel and other related industries believe the merits of nuclear power generation and expect that it will flourish if a certain problem is solved. Especially serious problem to which the U.S. nuclear industry is facing now is the problem of uncertainty. Many orders of nuclear power plants have been canceled, and the constructions have been postponed. The capability of the U.S. nuclear industry to construct more than the required facilities, and its extent and the necessary conditions have been investigated by the Atomic Industrial Forum. The important national and international problems of atomic energy are discussed. (Kako, I.)

  13. The World Nuclear Industry Status Report 2014

    International Nuclear Information System (INIS)

    Schneider, Mycle; Froggatt, Antony; Ayukawa, Yurika; Burnie, Shaun; Piria, Raffaele; Thomas, Steve; Hazemann, Julie; Suzuki, Tatsujiro

    2014-07-01

    The World Nuclear Industry Status Report 2014 provides a comprehensive overview of nuclear power plant data, including information on operation, production and construction. The WNISR assesses the status of new-build programs in current nuclear countries as well as in potential newcomer countries. A 20-page chapter on nuclear economics looks at the rapidly changing market conditions for nuclear power plants, whether operating, under construction, or in the planning stage. Reactor vendor strategies and the 'Hinkley Point C Deal' are analyzed in particular. The performance on financial markets of major utilities is documented. The WNISR2013 featured for the first time a Fukushima Status Report that triggered widespread media and analyst attention. The 2014 edition entirely updates that Fukushima chapter. The Nuclear Power vs. Renewable Energy chapter that provides comparative data on investment, capacity, and generation has been greatly extended by a section on system issues. How does nuclear power perform in systems with high renewable energy share? Is this the end of traditional baseload/ peak-load concepts? Finally, the 45-page Annex 1 provides a country-by-country overview of all 31 countries operating nuclear power plants, with extended Focus sections on China, Japan, and the United States

  14. Industrial applications of nuclear technology

    International Nuclear Information System (INIS)

    Vargas, Celso

    2010-01-01

    Industrial applications of nuclear technology have been very diverse worldwide. This type of technology has begun to introduce in Costa Rica to evaluate and improve different industrial processes. These applications have been classified into two or three categories, according to the criteria used. Nucleonic control systems, the gamma logging and radiotracers are determined. (author) [es

  15. The nuclear industry within the Community

    International Nuclear Information System (INIS)

    1989-11-01

    As part of its 1989 working programme, the European Commission undertook to update the provisional nuclear programme in the view of the expected changes from the single European market. This document complies with that commitment and deals exclusively with the problems of the industry engaged in the design and construction of electro-nuclear power stations. Having analysed the context and prospects for the medium and long term development of nuclear investments, in particular in relation to the establishment of a ''common electricity market'', the practical possibility of opening up the equipment and services market is examined. Actions to be taken within the Community are indicated. Finally, the standard for power stations equipped with fast neutron breeder reactors, where European efforts are directed towards a single development project, is presented. (UK)

  16. Radioactive wastes of Nuclear Industry

    International Nuclear Information System (INIS)

    1995-01-01

    This conference studies the radioactive waste of nuclear industry. Nine articles and presentations are exposed here; the action of the direction of nuclear installations safety, the improvement of industrial proceedings to reduce the waste volume, the packaging of radioactive waste, the safety of radioactive waste disposal and environmental impact studies, a presentation of waste coming from nuclear power plants, the new waste management policy, the international panorama of radioactive waste management, the international transport of radioactive waste, finally an economic analysis of the treatment and ultimate storage of radioactive waste. (N.C.)

  17. Russian nuclear industry exports

    International Nuclear Information System (INIS)

    Gorbatchev, A.

    2016-01-01

    Rosatom is the world leader for the export of nuclear technologies. 34 reactors of Russian technology are being built or planned worldwide. Most reactors proposed by Rosatom are third generation VVER-1200 units with an electric power output of 1200 MWe. Although the nuclear island is always built by Rosatom, the remain of the plant can be subcontracted to other enterprises and European companies are sought because they would bring a european quality touch to Russian works. One of the main assets of Rosatom is to propose an integrated offer from supplying nuclear fuel to managing nuclear waste via the turnkey building of nuclear power plants. Another important asset is the financial assistance of the Russian state through state credit or the support from Russian national banks that appears to be a decisive advantage in the international competition to win markets. We have to temper the Russian export perspectives by noting that most projects are set in countries that are prone to instabilities and that the economic crisis affecting Russia has a negative impact on its financial means. (A.C.)

  18. Special issue: the nuclear industry in Europe

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    This special issue contains papers on the following topics: French nuclear policy; nuclear energy development in Europe; nuclear diversification; Alsthom-Atlantique in the nuclear field; 1981 nuclear electricity generation; EDF siting policy; the N4 model of the 1300 MW series; Creys-Malville; the nuclear industry in Europe; pumps in the nuclear industry [fr

  19. Human capital in nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    2010-01-01

    On June 7, 2010, as part of the Atomexpo 2010 exhibition, a round-table discussion took place on the topic Human capital in the nuclear industry: challenges and solutions. The article summarizes reports made during the meeting. Tatiana Kozhevnikova, deputy director general of the Rosatom Corporation, made a report about the strategy and best human resource management practices in member companies of the Corporation. She briefly described the state of the human capital in the Russian nuclear industry and outlined the key provisions of the human resource management strategy. Attendees to the round-table discussion elaborated further on the key statements of the report. The discussion has given an evidence that the Russian nuclear industry is giving an enormous importance to human resource management and is firmly intended on successfully tacking the issues associated with the provision of sufficient staff for the industry's safe and efficient development [ru

  20. Nuclear industry review

    International Nuclear Information System (INIS)

    1982-01-01

    This review examines the consequences of projected excess electrical generating capacity for the maintenance of an independent nuclear power capability in Canada. Although consumption of electricity will continue to grow at rages well below historical averages, significant additions to capacity will be required in all parts of Canada in the 1990s. CANDU reactors are an attractive option for meeting load growth, particularly east of Manitoba. However, the absence of domestic orders in the 1980s may threaten the maintenance of this option. Even the most optimistic projections indicate that only one supplier of each component will remain in the nuclear business in the 1990s

  1. South Korea's nuclear fuel industry

    International Nuclear Information System (INIS)

    Clark, R.G.

    1990-01-01

    March 1990 marked a major milestone for South Korea's nuclear power program, as the country became self-sufficient in nuclear fuel fabrication. The reconversion line (UF 6 to UO 2 ) came into full operation at the Korea Nuclear Fuel Company's fabrication plant, as the last step in South Korea's program, initiated in the mid-1970s, to localize fuel fabrication. Thus, South Korea now has the capability to produce both CANDU and pressurized water reactor (PWR) fuel assemblies. This article covers the nuclear fuel industry in South Korea-how it is structures, its current capabilities, and its outlook for the future

  2. Transition in the nuclear industry

    International Nuclear Information System (INIS)

    Olyniec, J.H.

    1985-01-01

    Not long ago, nuclear energy was forecast to be the dominant force in the utility industry. An environmentally safe clean and inexpensive way to produce electricity would be welcomed by all. Civil engineering challenges on the leading edge of technology awaited the designer and constructor. As we now know, changes within the past 10 years have taken place that radically alter this outlook. Energy demand, thought to be ever increasing, was shocked by the rising costs. Plant construction delays, coupled with ever increasing regulatory requirements and higher interest rates, fueled the spiral or more cost. Economy of operation became overwhelmed by utility debt burden. Where is the nuclear utility industry now and what direction can we foresee. this symposium addresses the nuclear industry past, present, and future. The first session highlights some lessons learned from past experiences that must be applied in the future to be beneficial. Existing and future challenges are presented in the sessions on plant modifications and nuclear waste and decommissioning. The final session looks at the nuclear industry in transition from the perspectives of the different segments that make up the industry

  3. Update on nuclear structure effects in light muonic atoms

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, Oscar Javier, E-mail: javierh@triumf.ca; Dinur, Nir Nevo; Ji, Chen; Bacca, Sonia [TRIUMF (Canada); Barnea, Nir [The Hebrew University, Racah Institute of Physics (Israel)

    2016-12-15

    We present calculations of the nuclear structure corrections to the Lamb shift in light muonic atoms, using state-of-the-art nuclear potentials. We outline updated results on finite nucleon size contributions.

  4. Nuclear energy and the nuclear energy industry

    International Nuclear Information System (INIS)

    Bromova, E.; Vargoncik, D.; Sovadina, M.

    2013-01-01

    A popular interactive multimedia publication on nuclear energy in Slovak. 'Nuclear energy and energy' is a modern electronic publication that through engaging interpretation, combined with a number of interactive elements, explains the basic principles and facts of the peaceful uses of nuclear energy. Operation of nuclear power plants, an important part of the energy resources of developed countries, is frequently discussed topic in different social groups. Especially important is truthful knowledgeability of the general public about the benefits of technical solutions, but also on the risks and safety measures throughout the nuclear industry. According to an online survey 'Nuclear energy and energy' is the most comprehensive electronic multimedia publication worldwide, dedicated to the popularization of nuclear energy. With easy to understand texts, interactive and rich collection of accessories stock it belongs to modern educational and informational titles of the present time. The basic explanatory text of the publication is accompanied by history and the present time of all Slovak nuclear installations, including stock photos. For readers are presented the various attractions legible for the interpretation, which help them in a visual way to make a more complete picture of the concerned issue. Each chapter ends with a test pad where the readers can test their knowledge. Whole explanatory text (72 multimedia pages, 81,000 words) is accompanied by a lot of stock of graphic materials. The publication also includes 336 photos in 60 thematic photo galleries, 45 stock charts and drawings, diagrams and interactive 31 videos and 3D models.

  5. FPGA remote update for nuclear environments

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Ana; Pereira, Rita C.; Sousa, Jorge; Carvalho, Paulo F.; Correia, Miguel; Rodrigues, Antonio P.; Carvalho, Bernardo B.; Goncalves, Bruno [Instituto de Plasmasbe Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, 1049-001 Lisboa, (Portugal); Correia, Carlos M.B.A. [Centro de Instrumentacao, Dept. de Fisica, Universidade de Coimbra, 3004-516 Coimbra, (Portugal)

    2015-07-01

    The Instituto de Plasmas e Fusao Nuclear (IPFN) has developed dedicated re-configurable modules based on field programmable gate array (FPGA) devices for several nuclear fusion machines worldwide. Moreover, new Advanced Telecommunication Computing Architecture (ATCA) based modules developed by IPFN are already included in the ITER catalogue. One of the requirements for re-configurable modules operating in future nuclear environments including ITER is the remote update capability. Accordingly, this work presents an alternative method for FPGA remote programing to be implemented in new ATCA based re-configurable modules. FPGAs are volatile devices and their programming code is usually stored in dedicated flash memories for properly configuration during module power-on. The presented method is capable to store new FPGA codes in Serial Peripheral Interface (SPI) flash memories using the PCIexpress (PCIe) network established on the ATCA back-plane, linking data acquisition endpoints and the data switch blades. The method is based on the Xilinx Quick Boot application note, adapted to PCIe protocol and ATCA based modules. (authors)

  6. Environmental management in nuclear industry

    International Nuclear Information System (INIS)

    Pillai, K.C.; Bhat, I.S.

    1988-01-01

    Safety of the environment is given due attention right at the design state of nuclear energy installations. Besides this engineered safety environmental protection measures are taken on (a) site selection criteria (b) waste management practices (c) prescribing dose limits for the public (d) having intensive environmental surveillance programme and (e) emergency preparedness. The paper enumerates the application of these protection measures in the environmental management to make the nuclear industry as an example to follow in the goal of environmental safety. (author)

  7. Nuclear techniques in industry

    International Nuclear Information System (INIS)

    Barnette, P.

    The long term development and successful utilization of the Tongonan geothermal field for electric power generation is ultimately a function of the response of the reservoir to extensive exploitation. A field drawdown test of several years duration has been planned to test this response. A number of nuclear chemical techniques have been incorporated into this to assist in quantitatively tracing the subsurface movements of both reservoir and reinjected fluids; and to provide an early warning of changes in the physical and chemical properties of the reservoir fluids with respect to natural recharge. The programme will be implemented by Philippine Atomic Energy Commission (PAEC) under contract to Philippine National Oil Company - Energy Development Corporation (PNOC-EDC). (author)

  8. Nuclear industry and radioecological safety

    International Nuclear Information System (INIS)

    Semenov, V. G.

    2006-01-01

    The beginning of XXI century is marked with increasing public concern over impact of man-made activity, including nuclear technologies, on the environment. Currently, the anthropocentric principle is applied in the course of the radioecological safety guaranteeing for the environment, which postulates that human protectability serves as guarantee of the environmental one. However, this principle correctness is called in question recently. The ecocentric principle is proposed as an alternative doctrine, defining balance between human importance and that of any other elements of biota. The system recommended isn't intended for the regulatory standards development yet, because of substantial gaps in scientific knowledge. Nevertheless, renunciation of the anthropocentric principle can result in unwarranted tightened regulatory basis, decreasing of nuclear industry evolution rates, and, consequently, breaching of societal and economical priorities. It is obvious that for the safety guaranteeing, nuclear industry shouldn't stand out against a background of other fields of human activity involved hazard factors. Therefore, new conceptions applying within the regulatory system is to be weighted and exclude formal using of discussion theses. More than semi-centennial experience of the anthropocentric approach applying serves as an evidence of safe protection of ecosystems against radiation exposure that ensures safe ecological development of nuclear power industry and other fields of nuclear technologies application. (author)

  9. New Brunswick Power Nuclear Corporation update 2005

    International Nuclear Information System (INIS)

    White, R.M.; Eagles, E.R.; Pilkington, W.S.

    2005-01-01

    A brief presentation will be made on the operations and business activities over the previous year with a discussion of the current status of the NB Power group of companies. The New Brunswick Government has implemented the new 'Electricity Act' which has resulted restructuring of NB Power, opening of the electricity market to wholesale completion and the separation of the transmission system operation from NB Power. On October 1, 2005 the restructuring of NB Power was implemented to change NB Power from a single integrated utility into NB Power Holding Corporation with four subsidiary operating companies including NB Power Nuclear Corporation, NB Power Distribution and Customer Service Corporation, NB Power Transmission Corporation and NB Power Generation Corporation. As part of the Electricity Act, the transmission system reliability, operation and market control functions have been moved into a separate company, the NB System Operator, outside of the NB Power group of companies. A review of Point Lepreau's operational activities will include presentation of the capacity factor, availability and safety results with a summary of significant issues, planned outages and unplanned outages. An update on the current status of Power Reactor Operating License renewal and the strategies for renewal timing will be presented. Planning for refurbishment has continued with a major focus on addressing the recommendations made by Dr. Robin Jeffrey in his report to the Province of New Brunswick. These recommendations included three options for replacement of the Point Lepreau capacity and energy; 1) improve refurbishment contract arrangements with AECL, 2) solicit external investment in refurbishment and the station and 3) update the case for fossil fuel alternatives. The NB Power Holding Corporation Board of Directors have provided the appropriate information on the options to the owner (Province of New Brunswick) for consideration. A decision on the future of the Point Lepreau

  10. The UK nuclear power industry

    International Nuclear Information System (INIS)

    Collier, J. G.

    1995-01-01

    In the United Kingdom, nuclear power plants are operated by three companies: Nuclear Electric (NE), Scottish Nuclear (SN), and British Nuclear Fuels plc (BNFL). The state-operated power industry was privatized in 1989 with the exception of nuclear power generation activities, which were made part of the newly founded (state-owned) NE and SN. At the same time, a moratorium on the construction of new nuclear power plants was agreed. Only Sizewell B, the first plant in the UK to be equipped with a pressurized water reactor, was to be completed. That unit was first synchronized with the power grid on February 14, 1995. Another decision in 1989 provided for a review to be conducted in 1994 of the future of the peaceful uses of nuclear power in the country. The results of the review were presented by the government in a white paper on May 9, 1995. Accordingly, NE and SN will be merged and privatized in 1996; the headquarters of the new holding company will be in Scotland. The review does not foresee the construction of more nuclear power plants. However, NE hopes to gain a competitive edge over other sources of primary energy as a result of this privatization, and advocates construction of a dual-unit plant identical with Sizewell B so as to avoid recurrent design and development costs. Outside the UK, the company plans to act jointly with the reactor vendor, Westinghouse, especially in the Pacific region; a bid submitted by the consortium has been shortisted by the future operator of the Lungmen nuclear power plant project in Taiwan. In upgrading the safety of nuclear power plants in Eastern Europe, the new company will be able to work through existing contacts of SN. (orig.) [de

  11. Computer systems and nuclear industry

    International Nuclear Information System (INIS)

    Nkaoua, Th.; Poizat, F.; Augueres, M.J.

    1999-01-01

    This article deals with computer systems in nuclear industry. In most nuclear facilities it is necessary to handle a great deal of data and of actions in order to help plant operator to drive, to control physical processes and to assure the safety. The designing of reactors requires reliable computer codes able to simulate neutronic or mechanical or thermo-hydraulic behaviours. Calculations and simulations play an important role in safety analysis. In each of these domains, computer systems have progressively appeared as efficient tools to challenge and master complexity. (A.C.)

  12. Nuclear process steam for industry

    International Nuclear Information System (INIS)

    Seddon, W.A.

    1981-11-01

    A joint industrial survey funded by the Bruce County Council, the Ontario Energy Corporation and Atomic Energy of Canada Limited was carried out with the cooperation of Ontario Hydro and the Ontario Ministry of Industry and Tourism. Its objective was to identify and assess the future needs and interest of energy-intensive industries in an Industrial Energy Park adjacent to the Bruce Nuclear Power Development. The Energy Park would capitalize on the infrastructure of the existing CANDU reactors and Ontario Hydro's proven and unique capability to produce steam, as well as electricity, at a cost currently about half that from a comparable coal-fired station. Four industries with an integrated steam demand of some 1 x 10 6 lb/h were found to be prepared to consider seriously the use of nuclear steam. Their combined plants would involve a capital investment of over $200 million and provide jobs for 350-400 people. The high costs of transportation and the lack of docking facilities were considered to be the major drawbacks of the Bruce location. An indication of steam prices would be required for an over-all economic assessment

  13. The political economy of the nuclear industry

    International Nuclear Information System (INIS)

    Falk, J.

    1981-01-01

    The changing international context, in particular declining estimates of nuclear capacity and a depression in the nuclear reactor market will influence prospects for a nuclear industry in Australia. Effects of the opposition by trade unions and community groups to uranium mining are discussed. The relationship between political decisions and the economics of the nuclear power industry is stressed

  14. Corrosion management in nuclear industry

    International Nuclear Information System (INIS)

    Kamachi Mudali, U.

    2012-01-01

    Corrosion is a major degradation mechanism of metals and alloys which significantly affects the global economy with an average loss of 3.5% of GDP of several countries in many important industrial sectors including chemical, petrochemical, power, oil, refinery, fertilizer etc. The demand for higher efficiency and achieving name plate capacity, in addition to ever increasing temperatures, pressures and complexities in equipment geometry of industrial processes, necessitate utmost care in adopting appropriate corrosion management strategies in selecting, designing, fabricating and utilising various materials and coatings for engineering applications in industries. Corrosion control and prevention is an important focus area as the savings achieved from practicing corrosion control and prevention would bring significant benefits to the industry. Towards this, advanced corrosion management strategies starting from design, manufacturing, operation, maintenance, in-service inspection and online monitoring are essential. At the Indira Gandhi Centre for Atomic Research (IGCAR) strategic corrosion management efforts have been pursued in order to provide solutions to practical problems emerging in the plants, in addition to innovative efforts to provide insight into mechanism and understanding of corrosion of various engineering materials and coatings. In this presentation the author highlights how the nuclear industry benefited from the practical approach to successful corrosion management, particularly with respect to fast breeder reactor programme involving both reactor and associated reprocessing plants. (author)

  15. Capitalizing the contribution of the nuclear industry

    International Nuclear Information System (INIS)

    Donnadieu, G.

    1984-01-01

    The main contributions of the French nuclear industry to the country, and ways to make the most of them are presented. The advantages acquired include the nuclear power stations built; mastering of the combustion cycle; a powerful, well structured nuclear construction industry; and a nuclear-industrial complex giving France an important industrial potential. It is recommended that the industrial and research effort be maintained. The proposed strategy consists of defining an electronuclear program and associated economic development program and sticking to them; promoting exports; possibly merging certain industrial capacities; and strengthening the national position and independence concerning the fuel cycle [fr

  16. Future jobs in nuclear industry

    International Nuclear Information System (INIS)

    Asquier, S.

    2017-01-01

    CEA leads research on fast reactors in the framework of Generation-4 reactors, it also brings technical support to industrial partners like EDF or AREVA for today operating reactors. Computerized simulation is strongly developed in order to get reliable computers codes able to simulate mechanical behavior of new materials or neutron transport in new reactor cores. CEA is also in charge of the dismantling and remediation of its own nuclear facilities, today about 1000 people work on the dismantling of 35 facilities. CEA is also participating in fusion research programs. This broad range of activities makes CEA an important recruiter of competencies in a lot of domains from nuclear engineering to biological impact of radiations via computer sciences. (A.C.)

  17. The nuclear industries in the European community

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    The paper discusses the nuclear industries within the European Community. The strategic importance of nuclear energy is outlined, along with the economic benefits of nuclear power. The objectives of the Community's nuclear programme are described, and include nuclear requirements in Europe, uranium supplies and management of radioactive waste. (UK)

  18. Enhanced security in the nuclear industry

    International Nuclear Information System (INIS)

    Frappier, G.

    2007-01-01

    This article describes the security in the nuclear industry. After 9/11, Canada's nuclear regulator - the Canadian Nuclear Safety Commission (CNSC) - determined that the entire industry (including its own organization) faced a need for significant enhancements in their approach to security.

  19. Directory of the French nuclear industry

    International Nuclear Information System (INIS)

    2002-10-01

    This directory includes data sheets on the French companies operating in the nuclear industry. It begins with an introduction containing information on the French nuclear industry: 1 - nuclear power development in France (national energy plan, history, organization, economic advantages, reactors); 2 - French operator: Electricite de France (EdF); 3 - the industry (Areva, Cogema, mining activities, uranium chemistry and enrichment, processing, recycling, engineering, services, Framatome ANP); 4 - R and D and knowledge dissemination: French atomic energy commission (CEA); 5 - nuclear safety, security, control and regulation: nuclear safety authority (ASN), general direction of nuclear safety and radioprotection (DGSNR), institute of radioprotection and nuclear safety (IRSN), radioactive wastes, ANDRA's role; 6 - associations: French atomic forum (FAF), French nuclear industry trade association (GIIN), French nuclear energy society (SFEN), French radiation protection society (SFRP). Then, the data sheets of the directory follows. (J.S.)

  20. Nuclear power industry and environment

    International Nuclear Information System (INIS)

    Sivintsev, Yu.V.

    1979-01-01

    Estimated is the environmental impact of the developing nuclear power in the UK. The radiation levels of the population due to natural and artificial sources are considered. Among the natural sources singled out are the following ones: 238 U occuring in the surface layer of the earth-crust, 40 K which is the component of man muscles and which is the most important source of internal irradiation, and the cosmic radiation as well. Among the man-made radiation sources the dominant ones are X-ray diagnostics, nuclear tests and radioactive fall-out resulted from them. It is stated that nowdays the dose, caused by nuclear power industry in the UK, constitutes approximately 0.5 mrem/yr, which is considerably less than the dose variations due to residence change within the country or frequency of X-ray diagnostical examinations. The high level of the risk for the population in the NPS vicinity and for the personnel is estimated with the help of linear extrapolation of ''dose-response'' curve regarding the natural variations caused by residence variations and occupational hazard. According to the ICRP data, the risk of late effects is 10 -4 for man-rem. Considered are the existing and perspective management methods for NPS the high-level radioactive wastes in the UK as well as the equipment

  1. Nuclear power industry and environment

    Energy Technology Data Exchange (ETDEWEB)

    Sivintsev, Yu V

    1979-01-01

    Estimated is the environmental impact of the developing nuclear power in the UK. The radiation levels of the population due to natural and artificial sources are considered. Among the natural sources singled out are the following ones: /sup 238/U occuring in the surface layer of the earth-crust, /sup 40/K which is the component of man muscles and which is the most important source of internal irradiation, and the cosmic radiation as well. Among the man-made radiation sources the dominant ones are X-ray diagnostics, nuclear tests and radioactive fall-out resulted from them. It is stated that nowdays the dose, caused by nuclear power industry in the UK, constitutes approximately 0.5 mrem/y, which is considerably less than the dose variations due to residence change within the country or frequency of X-ray diagnostical examinations. The high level of the risk for the population in the NPS vicinity and for the personnel is estimated with the help of linear extrapolation of ''dose-response'' curve regarding the natural variations caused by residence variations and occupational hazard. According to the ICRP data, the risk of late effects is 10/sup -4/ for man-rem. Considered are the existing and perspective management methods for NPS the high-level radioactive wastes in the UK as well as the equipment.

  2. Chemical sensors for nuclear industry

    International Nuclear Information System (INIS)

    Gnanasekaran, K.I.

    2012-01-01

    Development of chemical sensors for detection of gases at trace levels for applications in nuclear industry will be highlighted. The sensors have to be highly sensitive, reliable and rugged with long term stability to operate in harsh industrial environment. Semiconductor and solid electrolyte based electrochemical sensors satisfy the requirements. Physico-chemical aspects underlying the development of H 2 sensors in sodium and in cover gas circuit of the Fast breeder reactors for its smooth functioning, NH 3 and H 2 S sensors for use in Heavy water production industries and NO x sensors for spent fuel reprocessing plants will be presented. Development of oxygen sensors to monitor the oxygen level in the reactor containments and sodium sensors for detection of sodium leakages will also be discussed. The talk will focus the general aspects of identification of the sensing material for the respective analyte species, development of suitable chemical route for preparing them as fine powders, the need for configuring them in thick film or thin film geometries and their performance. Pulsed laser deposition method, an elegant technique to prepare the high quality thin films of multicomponent oxides is demonstrated for preparation of nanostructured thin films of complex oxides and its use in tailoring the morphology of the complex sensing material in the desired form by optimizing the in-situ growth conditions. (author)

  3. Implications of nuclear industry globalization for chinese nuclear industry: opportunities and challenges

    International Nuclear Information System (INIS)

    Guo Zhifeng; Ding Qihua; Wang Zheng

    2014-01-01

    In recent years, globalization of the world nuclear industry has developed into a new phase. Chinese nuclear industry will be inevitably integrated into this trend. Globalization will bring both positive and adverse effects on Chinese nuclear industry. Facing the fierce competition, Chinese companies must rise to many challenges to enter the global nuclear market. And China need to make scientific decisions and take effective measures in various fields of nuclear industry to realized the goal of global development. (authors)

  4. Manipulating meanings. [Advertising by the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Burgess, J. (University College, London (United Kingdom). Dept. of Geography)

    Nuclear industry advertising in the United Kingdom is becoming more and more frequent, and is often controversial. The content and impact of recent campaigns are considered, especially the advertisement which portrays nuclear power as beneficial to the greenhouse effect. (author).

  5. Market competition in the nuclear industry

    International Nuclear Information System (INIS)

    Taylor, M.

    2008-01-01

    The nuclear industry provides a wide variety of specialized equipment and services to support the construction and operation of nuclear power plants (NPPs). This includes the supply of NPPs themselves, the range of materials and services required in the nuclear fuel cycle, and the services and equipment needed for maintenance and upgrading. The markets to provide these have changed substantially as they have evolved from the government-led early stages of the nuclear industry to predominantly competitive, commercial markets today. (author)

  6. Industrial application of nuclear techniques in Australia

    International Nuclear Information System (INIS)

    Easey, J.F.

    1981-01-01

    The applications of nuclear techniques in Australia was reviewed - the work has been to aid: mining and mineral sector, the manufacturing, chemical and petroleum industries, hydrology and sedimentology

  7. Low Energy Nuclear Reactions: 2007 Update

    Science.gov (United States)

    Krivit, Steven B.

    2007-03-01

    This paper presents an overview of low energy nuclear reactions, a subset of the field of condensed matter nuclear science. Condensed matter nuclear science studies nuclear effects in and/or on condensed matter, including low energy nuclear reactions, an entirely new branch of science that gained widespread attention and notoriety beginning in 1989 with the announcement of a previously unrecognized source of energy by Martin Fleischmann and Stanley Pons that came to be known as cold fusion. Two branches of LENR are recognized. The first includes a set of reactions like those observed by Fleischmann and Pons that use palladium and deuterium and yield excess heat and helium-4. Numerous mechanisms have been proposed to explain these reactions, however there is no consensus for, or general acceptance of, any of the theories. The claim of fusion is still considered speculative and, as such, is not an ideal term for this work. The other branch is a wide assortment of nuclear reactions that may occur with either hydrogen or deuterium. Anomalous nuclear transmutations are reported that involve light as well as heavy elements. The significant questions that face this field of research are: 1) Are LENRs a genuine nuclear reaction? 2) If so, is there a release of excess energy? 3) If there is, is the energy release cost-effective?

  8. Status of Chinese NPP Industry and Nuclear Fuel Cycle Policy

    Energy Technology Data Exchange (ETDEWEB)

    Gao, R. X. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Ko, W. I.; Kim, S. K. [Univ. of Science and Technology, Daejeon (Korea, Republic of)

    2013-05-15

    China still extended their experiences to both domestic and overseas so far. Chinese State Council approved its 'Medium and Long-term Nuclear Power Development Plan' in November 2007, indicating further definition for nuclear energy as indispensable energy option and future self-reliance development of nuclear industry. China intends to become self-sufficient not only in NPPs capacity, but also in the fuel production for all those plants. There are currently 17 NPPs in operation, and 28 NPPs under construction. However, domestic uranium mining supplying is currently less than a quarter of nuclear fuel demands. This paper investigated and summarized the updated status of NPP industry in China and Nuclear Fuel Cycle(NFC) policy. There still remain a number of technical innovation and comprehensive challenges for this nuclear developing country in the long-term, but its large ambitions and dramatic improvements toward future should not be ignored. As shown in this paper, the most suitable approach for China to achieve both environmentally-friendly power supplying and increasing energy demands meeting simultaneously must be considered. Nuclear energy now was recognized as the most potential and optimal way of energy supply system. In addition, to accommodate such a high-speed NPP construction in China, it should also focus on when and how spent nuclear fuel should be reprocessed. Finally, the nuclear back-end fuel cycle policy should be established, taking into accounts of all costs, uranium resource security, spent fuel management, proliferation resistance and environmental impact.

  9. Union innovation in Ontario's nuclear industry

    International Nuclear Information System (INIS)

    MacKinnon, D.

    2003-01-01

    Over the last decade the Power Worker's Union (PWU) has embarked on a number of innovative approaches that have provided significant benefit to the nuclear industry. These include advanced labour relations approaches, equity participation and groundbreaking skills training initiatives. This presentation outlines these and other initiatives in the context of the union's view of the nuclear generation industry's future. (author)

  10. The Nuclear Criticality Information System: An update

    International Nuclear Information System (INIS)

    Koponen, B.L.

    1991-07-01

    The US Department of Energy's Nuclear Criticality Information System (NCIS) has served the criticality community for the past ten years with publications and with an online information system. NCIS provides a mean for widely distributed nuclear criticality specialists to communicate and work together instantly. Users of the system may receive assistance from all members of the NCIS community, which provides a much broader base of support than is available at any single site. When unified by NCIS, these diverse specialists provide a resource that has proven to be very useful in the safe handling of fissile material. NCIS also is a source of current nuclear criticality safety information; the rapid access of such up-to-date information on the handling of fissile materials outside of nuclear reactors is international in scope, extending beyond political and geographical boundaries

  11. The world nuclear industry status report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, M.; Froggatt, A

    2007-11-15

    The status and perspectives of the nuclear industry in the world have been subject to a large number of publications and considerable media attention over the last few years. The present report attempts to provide solid elements of key information for intelligent analysis and informed decision-making. As of 1 November 2007 there are 439 nuclear reactors operating in the world. That is five less than five years ago. There are 32 units listed by the International Atomic Energy Agency (IAEA) as 'under construction'. That is about 20 less than in the late 1990's. In 1989 a total of 177 nuclear reactors had been operated in what are now the 27 EU Member States. That number shrank to 146 units as of 1 November 2007. In 1992 the Worldwatch Institute in Washington, WISE-Paris and Greenpeace International published the first World Nuclear Industry Status Report. As a first updated review in 2004 showed the 1992 analyses proved correct. In reality, the combined installed nuclear capacity of the 436 units operating in the world in the year 2000 was less than 352,000 megawatts - to be compared with the forecast of the International Atomic Energy Agency (IAEA) from the 1970's of up to 4,450,000 megawatts. Today the 439 worldwide operating reactors total 371,000 megawatts. Nuclear power plants provide 16% of the electricity, 6% of the commercial primary energy and 2-3% of the final energy in the world - the tendency is downwards - less than hydropower alone. Twenty-one of the 31 countries operating nuclear power plants decreased their share of nuclear power within the electricity mix if compared with 2003. The average age of the operating power plants is 23 years. Some nuclear utilities envisage reactor lifetimes of 40 years or more. Considering the fact that the average age of all 117 units that have already been closed is equally about 22 years, the doubling of the operational lifetime seems already rather optimistic. However, we have assumed an average

  12. The world nuclear industry status report 2007

    International Nuclear Information System (INIS)

    Schneider, M.; Froggatt, A.

    2007-11-01

    The status and perspectives of the nuclear industry in the world have been subject to a large number of publications and considerable media attention over the last few years. The present report attempts to provide solid elements of key information for intelligent analysis and informed decision-making. As of 1 November 2007 there are 439 nuclear reactors operating in the world. That is five less than five years ago. There are 32 units listed by the International Atomic Energy Agency (IAEA) as 'under construction'. That is about 20 less than in the late 1990's. In 1989 a total of 177 nuclear reactors had been operated in what are now the 27 EU Member States. That number shrank to 146 units as of 1 November 2007. In 1992 the Worldwatch Institute in Washington, WISE-Paris and Greenpeace International published the first World Nuclear Industry Status Report. As a first updated review in 2004 showed the 1992 analyses proved correct. In reality, the combined installed nuclear capacity of the 436 units operating in the world in the year 2000 was less than 352,000 megawatts - to be compared with the forecast of the International Atomic Energy Agency (IAEA) from the 1970's of up to 4,450,000 megawatts. Today the 439 worldwide operating reactors total 371,000 megawatts. Nuclear power plants provide 16% of the electricity, 6% of the commercial primary energy and 2-3% of the final energy in the world - the tendency is downwards - less than hydropower alone. Twenty-one of the 31 countries operating nuclear power plants decreased their share of nuclear power within the electricity mix if compared with 2003. The average age of the operating power plants is 23 years. Some nuclear utilities envisage reactor lifetimes of 40 years or more. Considering the fact that the average age of all 117 units that have already been closed is equally about 22 years, the doubling of the operational lifetime seems already rather optimistic. However, we have assumed an average lifetime of 40 years

  13. The Canadian nuclear industry - a national asset

    International Nuclear Information System (INIS)

    1985-03-01

    The economic importance of the Canadian nuclear industry in saving costs and creating jobs is expounded. The medical work of Atomic Energy of Canada Limited is also extolled. The Canadian Nuclear Association urges the federal government to continue to support the industry at home, and to continue to promote nuclear exports. This report was prepared in response to the Federal Finance Minister's 'A New Direction for Canada'

  14. Status of nuclear power industry in Ukraine

    International Nuclear Information System (INIS)

    Kadenko, I.M.; Vlasenko, M.I.

    2007-01-01

    There are five nuclear power plants and sites (NPPs) with 15 units in operation, 3 units under decommissioning and 1 drastically known as the 'Shelter' object in Ukraine. Ukraine has ambitions plans to develop nuclear industry based on own mineral, human financial resources as well as world wide international cooperation with nuclear countries

  15. The Canadian nuclear power industry. Background paper

    International Nuclear Information System (INIS)

    Nixon, A.

    1993-12-01

    Nuclear power, the production of electricity from uranium through nuclear fission, is by far the most prominent segment of the nuclear industry. The value of the electricity produced, $3.7 billion in Canada in 1992, far exceeds the value of any other product of the civilian nuclear industry. Power production employs many more people than any other sector, the capital investment is much greater, and nuclear power plants are much larger and more visible than uranium mining and processing facilities. They are also often located close to large population centres. This paper provides an overview of some of the enormously complex issues surrounding nuclear power. It describes the Canadian nuclear power industry, addressing i particular its performance so far and future prospects. (author). 1 tab

  16. The Canadian nuclear power industry. Background paper

    Energy Technology Data Exchange (ETDEWEB)

    Nixon, A [Library of Parliament, Ottawa, ON (Canada). Science and Technology Div.

    1993-12-01

    Nuclear power, the production of electricity from uranium through nuclear fission, is by far the most prominent segment of the nuclear industry. The value of the electricity produced, $3.7 billion in Canada in 1992, far exceeds the value of any other product of the civilian nuclear industry. Power production employs many more people than any other sector, the capital investment is much greater, and nuclear power plants are much larger and more visible than uranium mining and processing facilities. They are also often located close to large population centres. This paper provides an overview of some of the enormously complex issues surrounding nuclear power. It describes the Canadian nuclear power industry, addressing i particular its performance so far and future prospects. (author). 1 tab.

  17. Update on the USNRC's nuclear plant analyzer

    International Nuclear Information System (INIS)

    Laats, E.T.

    1987-01-01

    The Nuclear Plant Analyzer (NPA) is the U.S. Nuclear Regulatory Commission's (NRC's) state-of-the-art nuclear reactor simulation capability. This computer software package integrates high fidelity nuclear reactor simulation codes such as the TRAC and RELAPS series of codes with color graphics display techniques and advanced workstation hardware. An overview of this program was given at the 1984 Summer Computer Simulation Conference (SCSC), with selected topics discussed at the 1985 and 1986 SCSCs. This paper addresses these activities and related experiences. First, The Class VI computer implementation is discussed. The trade-offs between gaining significantly greater computational speed and central memory, with the loss of performance due to many more simultaneous users is shown. Second, the goal of the super-minicomputer implementation is to produce a very cost-effective system that utilizes advanced (multi-dimensional, two-phase coolant) simulation capabilities at real wall-clock simulation times. Benchmarking of the initial super-minicomputer implementation is discussed. Finally, the technical and economic feasibility is addressed for implementing the super-minicomputer version of the NPA with the RELAPS simulation code onto the Black Fox full scope nuclear power plant simulator

  18. Preliminary cost estimating for the nuclear industry

    International Nuclear Information System (INIS)

    Klumpar, I.V.; Soltz, K.M.

    1985-01-01

    The nuclear industry has higher costs for personnel, equipment, construction, and engineering than conventional industry, which means that cost estimation procedures may need adjustment. The authors account for the special technical and labor requirements of the nuclear industry in making adjustments to equipment and installation cost estimations. Using illustrative examples, they show that conventional methods of preliminary cost estimation are flexible enough for application to emerging industries if their cost structure is similar to that of the process industries. If not, modifications can provide enough engineering and cost data for a statistical analysis. 9 references, 14 figures, 4 tables

  19. Update on the USNRC's Nuclear Plant Analyzer

    International Nuclear Information System (INIS)

    Laats, E.T.

    1987-01-01

    The Nuclear Plant Analyzer (NPA) is the US Nuclear Regulatory Commission's (NRC's) state-of-the-art nuclear reactor simulation capability. This computer software package integrates high fidelity nuclear reactor simulation codes such as the TRAC and RELAP5 series of codes with color graphics display techniques and advanced workstation hardware. An overview of this program was given at the 1984 Summer Computer Simulation Conference (SCSC), with selected topics discussed at the 1985 and 1986 SCSCs. Since the 1984 presentation, major redirections of this NRC program have been taken. The original NPA system was developed for operation on a Control Data Corporation CYBER 176 computer, technology that is some 10 to 15 years old. The NPA system has recently been implemented on Class VI computers to gain increased computational capabilities, and is now being implemented on super-minicomputers for use by the scientific community and possibly by the commercial nuclear power plant simulator community. This paper addresses these activities and related experiences. First, the Class VI computer implementation is discussed. The trade-offs between gaining significantly greater computational speed and central memory, with the loss of performance due to many more simultaneous users is shown. Second, the goal of the super-minicomputer implementation is to produce a very cost-effective system that utilizes advanced (multi-dimensional, two-phase coolant) simulation capabilities at real wall-clock simulation times. Benchmarking of the initial super-minicomputer implementation is discussed. Finally, the technical and economic feasibility is addressed for implementing the super-minicomputer version of the NPA with the RELAP5 simulation code onto the Black Fox full scope nuclear power plant simulator

  20. Nuclear energy and the nuclear industry

    International Nuclear Information System (INIS)

    Chester, K.

    1982-01-01

    In order to make a real contribution to the nuclear energy debate (is nuclear energy the limitless solution to man's energy problems or the path to man's destruction) people must be aware of the facts. The Science Reference Library (SRL) has a collection of the primary sources of information on nuclear energy - especially journals. This guideline aims to draw attention to the up-to-date literature on nuclear energy and its technology, freely available for consultation in the main Holborn reading room. After explanations of where to look for particular types of information and the SRL classification, the booklet gives lists and brief notes on the sources held. These are abstracting and indexing periodicals and periodicals. Reports, conference proceedings, patents, bibliographies, directories, year-books and buyer's guides are covered very briefly but not listed. Nuclear reactor data and organisations are also listed with brief details of each. (U.K.)

  1. The worldwide nuclear industry and its markets

    International Nuclear Information System (INIS)

    Mons, L.

    2000-06-01

    The world nuclear industry has entered a phase of low activity since the beginning of the 90's. The opening of electricity markets to competition, the reserve of part of the public opinion with respect to nuclear energy and the competition of other power production sources explain the lack of dynamism of nuclear markets. In this context of uncertainties, the nuclear sector has started a re-structuration in depth with new strategic trends which will be decisive for the perenniality of the nuclear industry. The front-end of the fuel cycle is disturbed by production over-capacities which lead to strong tensions on prices. The veering of the German and Belgian policies has had strong impacts on the spent fuels reprocessing activity and the reactor construction activity is in decline in Europe and in the US. On the other hand, services are developing with the extension of the service life of nuclear plants and the waste management and dismantling markets are emerging. The main stakes that the occidental nuclear actors have to face today are: improving the competitiveness of nuclear industry, mastering the management of long-living radioactive wastes, proving the safeness of nuclear power, countering the arrival of Asian competitors. In front of these stakes, the nuclear actors have to take initiatives such as: concentration, vertical integration, technological innovation, communication, diversification etc.. This study examines the overall segments of the world nuclear industry. It comprises also a behaviour and strategy analysis of 13 major actors of this sector. (J.S.)

  2. NIASA: Nuclear Industry Association of South Africa

    International Nuclear Information System (INIS)

    Mollard, P.; Louf, P.H.; Gentet, G.; Doix, G.

    2015-01-01

    NIASA (Nuclear Industry Association of South Africa) aims at promoting the highest standards in the development and use of nuclear technologies. NIASA was founded in 2007. South-Africa has a long history in nuclear activity since the construction of the first nuclear power plant ever built on African soil was commissioned in 1984 in South-Africa (Koeberg plant equipped with two 900 MW reactors). There is also an important center for nuclear research near Pretoria that was founded in 1948 to regulate the prospecting for uranium. NECSA (South African Nuclear Energy Corporation is a state-owned public company) that manages nuclear research, operates the Safari-1 (2 MWe - commissioned in 1965) research reactor and manages the national radioactive waste center located at Vaalputs. The South African nuclear industry employs about 4000 people. (A.C.)

  3. US nuclear policy and business trend of Japan's nuclear industries

    International Nuclear Information System (INIS)

    Matsuo, Yuji

    2010-01-01

    As several countries in the east-Asia and middle-east area have been taking an increasing interest in the deployment of nuclear power generation, Japan's nuclear industries have promoted international business activities including the success in the bid of second nuclear power plants in Vietnam. While there are plans for more than thirty of new reactors in the US, the lifetime extension of existing aged reactors, development of non-existing natural gas and trend of greenhouse gases reduction measures have dampened these plans and probably most of new units will not start construction by 2030. This article reviewed the details of US's new nuclear power introduction, trend of recent government's policies, future perspective of nuclear power construction and business trend of Japan's nuclear industries. Japan's industries should be flexible regarding nuclear power as one option to realize low-carbon society. (T. Tanaka)

  4. Working in nuclear industry? why not?

    International Nuclear Information System (INIS)

    Brechet, Y.

    2017-01-01

    Today 200 nuclear reactors are being built or scheduled in the world and despite this, nuclear energy in western countries seems to collapse under the weights of prejudices and false ideas. No matter what the opponents say, nuclear energy is safe and clean and is a bringer of jobs. In France nuclear industry is one of a few industrial sectors that have been spared by massive de-industrialization. Nuclear energy as a carbon-free energy, has an important role to play to mitigate climate warming by working with renewable energies to provide a reliable electric power. This future is a new future for nuclear energy as new challenges have to be overcome, for instance nuclear energy has to adapt itself to the intermittency of wind and solar energies, nuclear industry has to be innovative and has to fully appropriate numerical technologies. Nuclear industry is a promising sector that proposes interesting scientific and technical jobs and is also a vital interest for the country. (A.C.)

  5. Atomic nanoscale technology in the nuclear industry

    CERN Document Server

    Woo, Taeho

    2011-01-01

    Developments at the nanoscale are leading to new possibilities and challenges for nuclear applications in areas ranging from medicine to international commerce to atomic power production/waste treatment. Progress in nanotech is helping the nuclear industry slash the cost of energy production. It also continues to improve application reliability and safety measures, which remain a critical concern, especially since the reactor disasters in Japan. Exploring the new wide-ranging landscape of nuclear function, Atomic Nanoscale Technology in the Nuclear Industry details the breakthroughs in nanosca

  6. Nuclear industry: a young sector of excellence

    International Nuclear Information System (INIS)

    Varin, P.

    2017-01-01

    Nuclear industry is the 3. industrial sector in France and is the good reason why the French energy mix is largely carbon-free. The medium term challenges that faces nuclear industry in this country is first to succeed the extensive refit of nuclear power plants with a view on getting the extension of their operating life and secondly to recruit the skilled staff nuclear industry needs. About 8000 jobs dispatched in the 2500 enterprises that forms the nuclear sector will be available each year up to 2020. The age pyramid shows that numerous retirements are expected in the years to come so the issue of skill and knowledge transfer is looming. 25% of recruitment will be made on the basis of work-study contracts particularly for technical jobs. Concerning recruitment, the nuclear sector is competing with other high-tech sectors like aeronautics or the automobile sector, which make things harder. The image that nuclear industry wants to promote of itself is the image of a young, modern, high-tech industry that appeared less than 50 years ago and whose main purpose is to provide a carbon-free electricity to an avid world. (A.C.)

  7. Update on DOE's Nuclear Energy University Program

    International Nuclear Information System (INIS)

    Lambregts, Marsha J.

    2009-01-01

    The Nuclear Energy University Program (NEUP) Office assists the U.S. Department of Energy Office of Nuclear Energy (DOE-NE) by administering its University Program. To promote accountable relationships between universities and the Technical Integration Offices (TIOs)/Technology Development Offices (TDOs), a process was designed and administered which includes two competitive Requests for Proposals (RFPs) and two Funding Opportunity Announcements (FOAs) in the following areas: (1) Research and Development (R and D) Grants, (2) Infrastructure improvement, and (3) Scholarships and Fellowships. NEUP will also host periodic reviews of university mission-specific R and D that document progress, reinforce accountability, and assess return on investment; sponsor workshops that inform universities of the Department's research needs to facilitate continued alignment of university R and D with NE missions; and conduct communications activities that foster stakeholder trust, serve as a catalyst for accomplishing NEUP objectives, and provide national visibility of NEUP activities and accomplishments. Year to date efforts to achieve these goals will be discussed.

  8. Low energy nuclear reactions: 2007 update

    International Nuclear Information System (INIS)

    Krivit, S. B.

    2007-01-01

    Introduction: This paper presents an overview of the field of low energy nuclear reactions (LENR), a branch of condensed matter nuclear science. It explains some of the various terminologies that have been used to describe this field since it debuted as 'cold fusion' in 1989. The paper also reviews some of the most interesting news and developments regarding low energy nuclear reaction experiments and theory, and some of the sociological and political trends that have affected the field over the last 18 years. It concludes with a list of resources and information for scientists, journalists and decision makers. Understanding the Nature of the Reactions The worldwide LENR research effort includes 200 researchers in 13 nations. Over the last 18 years, 12 international conferences have been held, as well as 7 regional conferences in Italy, 14 in Russia and 7 in Japan. The significant questions that face this field of research are: a) Are LENRs a genuine nuclear reaction? b) If so, is there a release of excess energy? and c) Are transmutations possible? If the answers to these questions turn out to be positive, the next questions will be: d) Is the energy release cost-effective? and e) Are the transmutations useful? Despite the fact that repeatability and reproducibility are challenging, the required parameters for achieving the excess heat effect are well understood. First, a high atomic loading ratio of D into Pd is required. In most conditions, 0.90 is the minimum threshold required to produce an excess heat effect. Second, a high electrical current density in the cathode is needed, 250 mA/cm 2 under most conditions. The third requirement is for some kind of dynamic trigger to impose a deuterium flux in, on or around the cathode. The challenge that researchers face is how to achieve these conditions. Some of the Most Interesting Research Developments Work by Stanislaw Szpak, Pamela Boss and Frank Gordon at the U.S. Navy's SPAWAR Systems Center in San Diego has

  9. An industry update: the latest news in therapeutic delivery.

    Science.gov (United States)

    Harris, Elaine

    2017-11-01

    The present industry update covers the period 1-31 July 2017. Information was sourced primarily from company press releases, regulatory and patent agencies, scientific literature and various news websites. There was positive approval news this month for GlaxoSmithKline for its new self-injecting treatment for systemic lupus erythematosus but less positive news for Ocular Therapeutix, a new drug application for its treatment for postoperative ocular pain, DEXTENZA™ was rejected for a second time. Endo Pharmaceuticals agreed to withdraw its opioid formulation Opana ® Er due to abuse concerns. Collaborations for novel therapeutic delivery research were announced this month by Takeda and BioSurfaces, Catelent and Rutgers University, Lilly and Purdue University and Titan Pharmaceuticals with Walter Reed and the Southwest Research Institute. A number of companies announced significant financing deals to allow for the clinical development of products with enhanced delivery options including Sebacia and Diasome.

  10. An industry update: the latest developments in Therapeutic delivery.

    Science.gov (United States)

    Steinbach, Oliver C

    2018-05-01

    The present industry update covers the period of 1 January-31 January 2018, with information sourced from company press releases, regulatory and patent agencies as well as scientific literature. Several public offerings (Gecko, Insmed), licensing (Foresee) and commercialization agreements (Alnylam, Collegium Pharmaceutical) as well as patent filings (Elute) continue to prove the sustained investments in the drug delivery market. In increasing numbers, more effective ways to deliver the active ingredient to the right location and the right dose through devices (Boehringer Ingelheim's Respimat, Medtronics' SynchroMedII) or improved compound properties through formulation (Aquestive Therapeutics' PharmFilm, Noven Pharmaceuticals' transdermal patch) are reaching the market. Furthering biologics and gene delivery (Avacta, Bracco) proves that novel drug delivery technologies are successfully addressing more challenging drug formats.

  11. Update of the Nuclear Criticality Slide Rule for the Emergency Response to a Nuclear Criticality Accident

    Science.gov (United States)

    Duluc, Matthieu; Bardelay, Aurélie; Celik, Cihangir; Heinrichs, Dave; Hopper, Calvin; Jones, Richard; Kim, Soon; Miller, Thomas; Troisne, Marc; Wilson, Chris

    2017-09-01

    AWE (UK), IRSN (France), LLNL (USA) and ORNL (USA) began a long term collaboration effort in 2015 to update the nuclear criticality Slide Rule for the emergency response to a nuclear criticality accident. This document, published almost 20 years ago, gives order of magnitude estimates of key parameters, such as number of fissions and doses (neutron and gamma), useful for emergency response teams and public authorities. This paper will present, firstly the motivation and the long term objectives for this update, then the overview of the initial configurations for updated calculations and preliminary results obtained with modern 3D codes.

  12. Update of the Nuclear Criticality Slide Rule for the Emergency Response to a Nuclear Criticality Accident

    Directory of Open Access Journals (Sweden)

    Duluc Matthieu

    2017-01-01

    Full Text Available AWE (UK, IRSN (France, LLNL (USA and ORNL (USA began a long term collaboration effort in 2015 to update the nuclear criticality Slide Rule for the emergency response to a nuclear criticality accident. This document, published almost 20 years ago, gives order of magnitude estimates of key parameters, such as number of fissions and doses (neutron and gamma, useful for emergency response teams and public authorities. This paper will present, firstly the motivation and the long term objectives for this update, then the overview of the initial configurations for updated calculations and preliminary results obtained with modern 3D codes.

  13. Nuclear industry chart no. 21 - France

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    A fold-out chart shows the relationship between the government bodies and industrial concerns. Nuclear power plant orders under the 1970-84 programme are tabulated. A directory is included of national bodies, firms and establishments. (U.K.)

  14. Trends in risk management in nuclear industry

    International Nuclear Information System (INIS)

    Kim, Inn Seock

    1996-01-01

    Safety management may be classified into three dimensions: risk management, accident management, and emergency management. This paper addresses the recent trends of safety management in nuclear industry, focussing on risk management and accident management

  15. Hazard and safety in the nuclear industry

    International Nuclear Information System (INIS)

    Tadmor, J.

    1978-01-01

    Although the number of victims in the nuclear industry has been extremely low as compared with the number of victims in other spheres of human activity society has been willing to put up with a high number of accidents resulting in few victims per accident but refuses to accept an extremely rare accident resulting in a high number of victims. The U.S. nuclear industry is spending almost 2000 dollars for each reduction of a man x rem unit and this investment raises the ''man-life value'' in the nuclear industry to 10 million dollars as compared with 10,000 to 20,000 dollars spent in other activities (roentgen, early cancer detection, etc.). To reduce the exaggerated burden placed on the nuclear industry the safety expenditures should be spread over a maximum possible range of human activities. (B.G.)

  16. US nuclear power industry overview

    International Nuclear Information System (INIS)

    Wood, C.J.

    1995-01-01

    The electric utilities in the United States are facing a number of challenges as deregulation proceeds. Cost control is one of these challenges that impacts directly the operators of nuclear power plants. This presentation reviews recent data on the performance of nuclear power plants and discusses technical developments to reduce operating costs, with particular reference to low-level radioactive waste issues

  17. Nuclear industry (Finance) Act 1981

    International Nuclear Information System (INIS)

    1981-01-01

    The purpose of the Act is to enable British Nuclear Fuels Limited to make borrowings backed by Government guarantees in order to finance its ten year investment programme. More specifically, the Act raises the financial limit applicable to British Nuclear Fuels Limited from pound 500 million to pound 1,000 million. (NEA) [fr

  18. Nuclear industry project audit and countermeasures

    International Nuclear Information System (INIS)

    Li Yongxin; Zhang Jian

    2012-01-01

    With China's increasing use of nuclear energy, nuclear power related construction projects related to the deepening of the audit, some of the nuclear industry in construction field of the dominant issues have been more effective containment, such as inflated workload, high-set fixed standards, to improve billing unit price, which overestimate the risk calculation tools and behavior completed audit of the accounts have been able to escape his stuff. However, some nuclear industry construction field with a hidden problem because of its hidden nature, not easily found, and some even have intensified the trend. Construction funds to the country such problems caused by the loss of waste is enormous, to the breeding of corruption provided the soil is fertile, if not promptly and effectively to stop the breeding will spread. This paper on the current construction of the nuclear industry in several major areas of the hidden problems are discussed, and the angle from the audit of appropriate countermeasures. (authors)

  19. The World Nuclear Industry Status Report 2012

    International Nuclear Information System (INIS)

    Schneider, Mycle; Froggatt, Antony; Hazemann, Julie

    2012-07-01

    Twenty years after its first edition, World Nuclear Industry Status Report 2012 portrays an industry suffering from the cumulative impacts of the world economic crisis, the Fukushima disaster, ferocious competitors and its own planning and management difficulties. The report provides a global overview of the history, the current status and trends of nuclear power programs in the world. It looks at units in operation and under construction. Annex 1 also provides detailed country-by-country information. A specific chapter assesses the situation in potential newcomer countries. For the first time, the report looks at the credit-rating performance of some of the major nuclear companies and utilities. A more detailed chapter on the development patterns of renewable energies versus nuclear power is also included. The performance of the nuclear industry over the 18 months since the beginning of 2011 is summed up in this report

  20. Nuclear data sheets update for A = 80

    International Nuclear Information System (INIS)

    Singh, B.

    1992-01-01

    Nuclear spectroscopic information for known nuclides of mass number 80 (Zn, Ga, Ge, As, Se, Br, Kr, Rb, Sr, Y, Zr) have been evaluated and presented together with adopted energies and Jπ of levels in these nuclei. No data are yet available for excited states in 80 Zn and 80 Y. This evaluation represents a revision of earlier ones (82Si20,75Gr19). No data are available for 80 Ni, but calculations of %β - n and T 1/2 (g.s.) using RPA method have been reported by 89Kr02. A severe disagreement is noted in the systematics (85Wa02) and measured (82De36,81LKi12) Q(ε) of 80 Y decay. A remeasurement of this value is required to clarify the difference of about 2 Mev

  1. Options contracts in the nuclear fuel industry

    International Nuclear Information System (INIS)

    Fuller, D.M.

    1995-01-01

    This article discusses options trading in the nuclear fuels industry. Although there now exists no formal options market in the nuclear industry, flexibilities, or embedded options, are actually quite common in the long-term supply contracts. The value of these flexibilities can be estimated by applying the methods used to evaluate options. The method used is the Black-Scholes Model, and it is applied to a number of examples

  2. Continuous improvement methods in the nuclear industry

    International Nuclear Information System (INIS)

    Heising, Carolyn D.

    1995-01-01

    The purpose of this paper is to investigate management methods for improved safety in the nuclear power industry. Process improvement management, methods of business process reengineering, total quality management, and continued process improvement (KAIZEN) are explored. The anticipated advantages of extensive use of improved process oriented management methods in the nuclear industry are increased effectiveness and efficiency in virtually all tasks of plant operation and maintenance. Important spin off include increased plant safety and economy. (author). 6 refs., 1 fig

  3. Personal radiation protection in nuclear industry

    International Nuclear Information System (INIS)

    Gol'dshtejn, D.S.; Koshcheev, V.S.

    1983-01-01

    Specific peculiarities of organization of personal radiation protection at various nuclear industry enterprises when dealing with radioactive and other toxic substances are illuminated. Effect of heatin.g and cooling microclimate is discussed. Medical and technical requirements for personal protection means and tasks of personal protection in the field of nuclear industry are considered in short along with some peculiarities of application of different kinds of personal protection means and psychological aspects of personnel protection

  4. Student involvement and research for the nuclear industry

    International Nuclear Information System (INIS)

    Ginniff, M.E.

    1980-01-01

    Nuclear engineering is one of the modern and rapidly advancing technologies. Those already involved in it are continually updating their knowledge to keep abreast of the developments. Of course the sound basic principles of engineering still apply but the scene of application can be transformed in a few years. In fact, because of this, many engineers from more traditional industries often express the view that presently the total range of nuclear engineering is research and development. How can students be trained for such a rapidly advancing technology. Is not the answer early involvement. Effective early involvement for students can only come about by the close co-operation and involvement of the staff of universities and industry. The theme is developed. (author)

  5. Human resources in the Japanese nuclear industry

    International Nuclear Information System (INIS)

    Katayama, M.

    1995-01-01

    Japan is becoming rapidly a nation with an elderly population. Japanese students are turning away from the manufacturing industries, including the nuclear industry, and turning towards more service oriented industries that are considered to be cleaner and to pay better. Studies have been performed to devise ways to attract young workers to the nuclear industry, which is projected to continue to grown under the current long range energy plants. The paper summarizes the findings and recommendations of the recent studies conducted by the nuclear industry and academic circles. All studies point out that insufficient emphasis is placed on science in the present Japanese educational programme and that implementation of effective programmes to revitalize education in science is most urgently needed to keep Japan in the forefront of high technology. Utilization of advanced computer technology and automation is promoted to improve working conditions and efficiency in the nuclear industry. In addition, the establishment of a professional status of engineers and technicians will be vital for an effective utilization of qualified workers in the nuclear industry. (author). 3 refs, 1 tab

  6. Privatisation of the UK's nuclear power industry: nuclear's triple challenge

    International Nuclear Information System (INIS)

    Fraser, W.R.I.

    1997-01-01

    At the British Nuclear Congress in December 1996, Lord Fraser of Caryllie, then UK energy minister, set out the three key issues the nuclear industry must tackle for a successful future: (1) increased competition from other energy sources, (2) a growing world market for its skills and (3) a continuing tough regulatory regime. Nuclear power, with electricity generated in the UK rising to 25%, has responded well to competition from other energy sources, and also to the further competition generated by privatisation which has already generated benefits for the public. As other countries with nuclear programmes diversify and upgrade their technology this will create new export opportunities for Britain over and above those already in existence, notably by BNFL in Japan. Other areas that Britain has to offer relate to safety improvements, notably in eastern Europe, and decommissioning, in which Magnox Electric is one of the few operators in the world with experience in decommissioning a full scale commercial reactor. The regulatory framework for the nuclear industry will continue to be as rigorous as ever, but, however the industry is structured, it should be noted that commercial success and continued safe operations are inextricably linked. The industry must operate within the framework of the development of international treaties and agreements in the nuclear field. The Government will continue to take a close interest in the safety, security and prosperity of the nuclear industry, and help Britain as a whole to be a successful and influential player in the international nuclear community. (UK)

  7. Long-Term Nuclear Industry Outlook - 2004

    Energy Technology Data Exchange (ETDEWEB)

    Reichmuth, Barbara A.; Wood, Thomas W.; Johnson, Wayne L.

    2004-09-30

    The nuclear industry has become increasingly efficient and global in nature, but may now be poised at a crossroads between graceful decline and profound growth as a viable provider of electrical energy. Predicted population and energy-demand growth, an increased interest in global climate change, the desire to reduce the international dependence on oil as an energy source, the potential for hydrogen co-generation using nuclear power reactors, and the improved performance in the nuclear power industry have raised the prospect of a “nuclear renaissance” in which nuclear power would play an increasingly more important role in both domestic and international energy market. This report provides an assessment of the role nuclear-generated power will plan in the global energy future and explores the impact of that role on export controls.

  8. Dikkers Valves for nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    Most countries have adopted the ASME Boiler and Pressure Vessel Code Section III, as the basis of their national requirements for licensing nuclear components. This Code gives clear directives for defining design requirements coupled with a controlled manufacturing system. It has always been and still is the policy of Dikkers to manufacture high-quality products. Dikkers manufacture nuclear products in accordance with this Code, Section III; indeed many features exceed these minimum requirements. At the Nuclex Exhibition in Basel, Dikkers Valves BV will exhibit its main products for use in nuclear power plants. (Auth.)

  9. Nuclear industry chart no. 20 - Sweden

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    A folding chart is presented of the Swedish nuclear industry, which shows the government bodies, companies, utilities and other groups who participate in the nuclear field. Their special interests and activities and affiliations with each other and with international organisations are indicated. (U.K.)

  10. Organization of the German nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Corporate ownership within the German nuclear industry has evolved constantly during the last decade, and recent acquisitions and mergers, reunification of the country, as well as preparation for a unified European power market, have led to many significant changes during the past two years. The country's nuclear industry continues to struggle under an increasingly anti-nuclear political environment, yet nuclear power provided more than one-third of Germany's total electricity generation in 1991. As in many countries, particularly in western Europe, many German companies involved in different facets of the nuclear industry are interrelated. Usually as a means of horizontal or vertical integration, the country's nuclear utilities own, directly or indirectly, shares in uranium mining projects; conversion, enrichment, and fabrication companies; or other utilities' nuclear power plants. The utilities own partial interests in companies in supporting industries as well, including transportation firms, waste management companies, uranium broker/traders, and nuclear equipment manufacturers. While the majority of the companies owned are German, numerous investments are made in non-German firms also

  11. Hanford spent nuclear fuel project update

    Energy Technology Data Exchange (ETDEWEB)

    Williams, N.H.

    1997-08-19

    Twenty one hundred metric tons of spent nuclear fuel (SNF) are currently stored in the Hanford Site K Basins near the Columbia River. The deteriorating conditions of the fuel and the basins provide engineering and management challenges to assure safe current and future storage. DE and S Hanford, Inc., part of the Fluor Daniel Hanford, Inc. lead team on the Project Hanford Management Contract, is constructing facilities and systems to move the fuel from current pool storage to a dry interim storage facility away from the Columbia River, and to treat and dispose of K Basins sludge, debris and water. The process starts in K Basins where fuel elements will be removed from existing canisters, washed, and separated from sludge and scrap fuel pieces. Fuel elements will be placed in baskets and loaded into Multi-Canister Overpacks (MCOs) and into transportation casks. The MCO and cask will be transported to the Cold Vacuum Drying Facility, where free water within the MCO will be removed under vacuum at slightly elevated temperatures. The MCOs will be sealed and transported via the transport cask to the Canister Storage Building.

  12. Westinghouse support for Spanish nuclear industry

    International Nuclear Information System (INIS)

    Rebollo, R.

    1999-01-01

    One of the major commitments Westinghouse has with the nuclear industry is to provide to the utilities the support necessary to have their nuclear units operating at optimum levels of availability and safety. This article outlines the organization the Energy Systems Business Unit of Westinghouse has in place to fulfill this commitment and describes the evolution of the support Westinghouse is providing to the operation o f the Spanish Nuclear Power plants. (Author)

  13. The World Nuclear Industry Status Report: 1992

    International Nuclear Information System (INIS)

    Flavin, Christopher; Lenssen, Nicholas; Froggatt, Antony; Willis, John; Kondakji, Assad; Schneider, Mycle

    1992-05-01

    The World Nuclear Industry Status Report provides a comprehensive overview of nuclear power plant data, including information on operation, production and construction. The WNISR assesses the status of new-build programs in current nuclear countries as well as in potential newcomer countries. This first WNISR Report was issued in 1992 in a joint publication with WISE-Paris, Greenpeace International and the World Watch Institute, Washington

  14. Nuclear fuel cycle. International overview. Updating of volume 1

    International Nuclear Information System (INIS)

    1985-01-01

    It is presented the updating of the vol.I of the 'Nuclear fuel cycle - International overview' series which informs about the nuclear fuel cycle in the main countries that supply and /or use nuclear energy. It intends to serve the managerial staff since it gives a global view of the fuel cycle as well as its extent in each of the countries focalized. Information about Japan, Federal Republic of Germany, United Kingdon, France and Canada are presented. At first a summary about the situation of each country is presented and then all data for each country is presented in a tree - graphyic type, using an analysis and synthesis method, developed at the Nuclear Information Center, Brazil. (E.G.) [pt

  15. The American nuclear power industry. A handbook

    International Nuclear Information System (INIS)

    Pearman, W.A.; Starr, P.

    1984-01-01

    This book presents an overview of the history and current organization of the American nuclear power industry. Part I focuses on development of the industry, including the number, capacity, and type of plants in commercial operation as well as those under construction. Part II examines the safety, environmental, antitrust, and licensing issues involved in the use of nuclear power. Part III presents case studies of selected plants, such as Three Mile Island and Seabrook, to illustrate some of the issues discussed. The book also contains a listing of the Nuclear Regulatory Commission libraries and a subject index

  16. Prospects of nuclear industry in Latin American

    International Nuclear Information System (INIS)

    Brito, S.; Consentino, J.; Eibenschuts, J.; Gasparian, A.E.; Lepecki, W.; Mueller, A.E.F.; Spitalnik, J.

    1984-01-01

    The prospects of nuclear generation in Latin America are presented. It is mentioned that prior to the implementation of a nuclear power programme a legal, organizational and industrial infrastructure has to be developed as a condition for an effetive technology transfer. It is also mentioned that by the expansion of regional cooperation, existing experience and know-how in Latin America nuclear industry, specially regarding small and medium power reactors, could become an important development factor for the whole region. (R.S.) [pt

  17. Nuclear industry is ready for digitalization

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2017-01-01

    Nuclear industry is now embracing the digital revolution by adapting existing digital technologies concerning big data, additive manufacturing, connected objects or enhanced reality to the constraints of nuclear industry. The expected benefits will be manifold: to assure and improve the competitiveness of new reactors, to accelerate the implementation of innovations, to develop preventive maintenance, and to allow a better communication between teams working on the same project. In some big enterprises a chief digital officer has been commissioned to prioritize the introduction of digital technologies in industrial projects. (A.C.)

  18. A view from the nuclear industry

    International Nuclear Information System (INIS)

    Berry, R.J.

    1989-01-01

    The Conference is reminded that the nuclear industry regards occupational radiation-induced cancer as a putative rather than a demonstrated hazard at current dose levels. Although epidemiological studies have shown possible dose-response correlation, all such studies of nuclear industry personnel show an overall risk of malignant disease lower than that for the general public. Doses to workers in the nuclear industry have been reducing since the 1970s, largely in consequence of the optimisation of radiation protection and the injunction ''to keep doses as low as reasonably achievable'' without reduction in occupational dose limits over this period. It is argued that further reduction in individual dose limits will act to increase collective dose. The nuclear industry no longer has either the highest individual average or collective radiation doses to its workforce within British industry; higher average individual doses occur in the non-coal mining industry and the collective dose to coal miners is greater than that of nuclear fuel cycle workers and comparable to the sum of collective doses to fuel cycle and power generation workers. (author)

  19. The nuclear industry and the young generation

    International Nuclear Information System (INIS)

    Hanti, A.

    2000-01-01

    The European Nuclear Society was founded in 1975. It is a federation of 25 nuclear societies from 24 countries-stretching from the Atlantic to the Urals and on across Russia to the Pacific. Through Russia's membership in the Pacific Nuclear Council. ENS is directly linked to that area, too. ENS comprises more than 20 000 professionals from industry, power stations, research centers and authorities, working to advance nuclear energy. ENS has three Member Societies in Australia, Israel and Morocco. Also it has collaboration agreements with the American Nuclear Society, the Argentinean Nuclear Energy Association, the Canadian and the Chinese Nuclear Societies. ENS is doing pioneering work with its Young Generation Network, standing for positive measures to recruit and educate young people as engineers, technicians and skilled staff ion the nuclear field: from school to university and in industry. The goals of the YGN are: to promote the establishment of national Young Generation networks; to promote the exchange of knowledge between older and younger generation cross-linked all over Europe; to encourage young people in nuclear technology to provide a resource for the future; to communicate nuclear issues to the public (general public, media, politicians). (N.C.)

  20. Situation of nuclear industry in Japan

    International Nuclear Information System (INIS)

    2002-08-01

    This document is a reprint of a note published by the nuclear service of the French embassy in Japan. It evokes the present day situation of nuclear facilities in Japan, the public acceptance and its attitude in front of accidents, the national energy program, the deregulation and competitiveness of nuclear power, the carrying out of the nuclear program, the future reactors, the fast neutron reactors, the dismantling activities, the fuel enrichment and reprocessing of spent fuels, the use of MOX fuel, the off-site storage, the vitrified and radiological wastes, the geological disposal of wastes, the prospects of the nuclear program, the companies involved in the Japan nuclear industry, the French-Japanese bilateral cooperation, and the ITER project in the domain of nuclear fusion. (J.S.)

  1. Nuclear industry - challenges in chemical engineering

    International Nuclear Information System (INIS)

    Sen, S.; Sunder Rajan, N.S.; Balu, K.; Garg, R.K.; Murthy, L.G.K.; Ramani, M.P.S.; Rao, M.K.; Sadhukhan, H.K.; Venkat Raj, V.

    1978-01-01

    As chemical engineering processes and operations are closely involved in many areas of nuclear industry, the chemical engineer has a vital role to play in its growth and development. An account of the major achievements of the Indian chemical engineers in this field is given with view of impressing upon the faculty members of the Indian universities the need for taking appropriate steps to prepare chemical engineers suitable for nuclear industry. Some of the major achievements of the Indian chemical engineers in this field are : (1) separation of useful minerals from beach sand, (2) preparation of thorium nitrate of nuclear purity from monazite, (3) processing of zircon sand to obtain nuclear grade zirconium and its separation from hafnium to obtain zirconium metal sponge, (4) recovery of uranium from copper tailings, (5) economic recovery of nuclear grade uranium from low grade uranium ores found in India, (6) fuel reprocessing, (7) chemical processing of both low and high level radioactive wastes. (M.G.B.)

  2. Assurance of durable nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Fortescue, P [General Atomic Co.

    1976-10-01

    The problem of conservation of fuel resources resulting in a need for reactor systems with more economical fuel cycles, is discussed. Breeders and advanced converters are first considered. An examination is then made of symbiotic arrangements to form a self-sufficient power-producing complex. An illustration is given of a gas breeder-HTGR combination. The ratio of HTGR to breeder thermal power is calculated for a self-sufficient combination without provision of industry expansion, and also when allowing for industry expansion. It is shown that fuel resources can be extended and become most rapidly useful by proper portions of LWRs, fast breeders, and HTGRs.

  3. IEC ready for turnaround in nuclear industry

    International Nuclear Information System (INIS)

    Schomberg, R.; Corte, E.; Thompson, I.

    2005-01-01

    The activity of IEC Technical Committee (TC) 45 (Nuclear Instrumentation) in conditions of turnaround in nuclear industry is considered. TC 45's main task is to lay down a comprehensive strategy for itself and its two subcommittees as well as to improve the relevance of the nuclear safety standards. Subcommittee 45A develops standards that apply to the electronic and electrical functions and associated systems and equipment used in the instrumentation and control systems of nuclear energy generation facilities. Subcommittee 45B develops and issues standards covering all aspects of instrumentation associated with radiation protection including radiation detectors, radiation monitoring, dosimetry and radiology [ru

  4. What nuclear industry after Fukushima?

    International Nuclear Information System (INIS)

    Barre, Bertrand

    2011-01-01

    Nuclear power experienced a fast growth during the 70's and 80's, but a quasi-stagnation during the 90's. Since the beginning of the 21. century, a so-called renaissance could be witnessed, fuelled by concerns about energy security of supply, volatility of oil and gas prices, fear of an incoming 'peak oil', and, last but not least, the threat of global climate change due to the anthropogenic emissions of greenhouse effect gases. Then, on March 11 2011, a monster earthquake followed by a violent tsunami triggered an accident which all but destroyed four nuclear reactors on the Fukushima-Daiichi site, on the east coast of Honshu, the main Japanese island. There was meltdown in three reactor cores, hydrogen explosions which blew off the upper structures of four reactor buildings, and massive radioactive contamination of a spread of land north-west of the site as well as radioactive releases to the ocean. This accident triggered reactions of various intensities throughout the world, awakening the fears, and questions raised 25 years before by the Chernobyl accident. But the tsunami did not make the fundamentals of the renaissance disappear. After a pause, to fully learn lessons from the accident, the renaissance is likely to start again, all the much since the 'third generation' nuclear plants would have survived unscathed the Fukushima earthquake and tsunami. (author)

  5. Knowledge management for nuclear industry operating organizations

    International Nuclear Information System (INIS)

    2006-10-01

    The nuclear energy sector is characterized by lengthy time frames and technical excellence. Early nuclear plants were designed to operate for 40 years but their service life now frequently extends between 50 and 60 years. Decommissioning and decontamination of nuclear plants will also be spread over several years resulting in a life cycle - from cradle to grave - in excess of 100 years, which gives rise to two challenges for the nuclear industry: (1) Retention of existing skills and competencies for a period of over fifty years, particularly in countries where no new nuclear power plants are being planned; and (2) Development of new skills and competencies in the areas of decommissioning and radioactive waste management in many industrialized countries if younger workers cannot continue to be attracted to the nuclear disciplines. As many nuclear experts around the world are retiring, they are taking with them a substantial amount of knowledge and corporate memory. Typically, these retirees are individuals who can answer questions very easily and who possess tacit knowledge never before extracted from them. The loss of such employees who hold knowledge critical to either operations or safety poses a clear internal threat to the safe and reliable operation of nuclear power plants (NPPs). Therefore, the primary challenge of preserving such knowledge is to determine how best to capture tacit knowledge and transfer it to successors. These problems are exacerbated by the deregulation of energy markets around the world. The nuclear industry is now required to reduce its costs dramatically in order to compete with generators that have different technology life cycle profiles. In many countries, government funding has been dramatically reduced or has disappeared altogether while the profit margins of generators have been severely squeezed. The result has been lower electricity prices but also the loss of expertise as a result of downsizing to reduce salary costs, a loss of

  6. Industry Update: the latest developments in therapeutic delivery.

    Science.gov (United States)

    Steinbach, Oliver C

    2013-05-01

    The present industry update covers the period 2-28 February 2013, with information sourced from company press releases, regulatory and patent agencies, as well as from scientific literature. With the US presidential inauguration in January, the inevitable 'fiscal cliff' and with the healthcare reform taking shape, there are many challenges ahead for the world's largest healthcare market. Healthcare providers are preparing for the 'accountable care organizations' paradigm shift and it has been reported that the pharmaceutical industry is low in public perception; only 'for-profit' health insurers rank lower according to a survey recently published. Although in 2012 one could still observe a decline in the overall number of drug delivery partnering deals announced, there has been a slight recovery, thus, meaning a repeat of the lows of 2011 have not been witnessed. The experts expect a reversed trend in 2013 as larger companies seek to refill pipelines with new candidates and drug-delivery solutions. There is a lot of emphasis on altered oral delivery profiles to provide patient compliance. This is indicated by the recent licensing deals, such as that between Radius Health Inc. and 3M, TissueGen and Biomedical Structures, and new financing rounds of companies, such as SKL, Catalent and BioActiva. Injectable technology, including needle-free delivery, continues to be prevalent in deals, such as those between Clearside and Kala until compelling alternatives to the delivery of biologicals are available. Alternative routes of administration, such as nasal, buccal (Kala), sublingual (Stallergenes) see growing interest; however, bioavailability and reproducible dosing will continue to be a challenge in the foreseeable future.

  7. An industry update: the latest developments in therapeutic delivery.

    Science.gov (United States)

    Steinbach, Oliver C

    2017-10-01

    The present industry update covers the period 1-30 June 2017, with information sourced from company press releases, regulatory and patent agencies as well as scientific literature. The combination of drug and devices such as improved, safer injectables (see various market reports, companies Adamis and Baxter), patches (Microdermis) and (nano)carriers are moving increasingly from the R&D stage into clinical trials and toward the market. This addresses increased safety and effectiveness requirements, limiting physico-chemical properties of active ingredients, cost-effectiveness and patient comfort through ease of use. Further attention in the market is on local delivery methods (such as intraocular by Icon Bioscience, Glaukos) and the sheer infinite possibilities of nanotechnology such as LDL nanocarriers, microneedles and hydrogel cubes. Another 21st century key technology area is mobile applications (Vital Art and Science) and connected devices (SmartPill, Pop Test Devices) which are increasingly finding their way into the drug delivery field to enable, for example, closed loop monitoring of drug dosing in trials and of patients with their care providers. Not surprisingly companies are increasingly utilizing convergence to combine their diverse capabilities (Vetter Pharma/Microdermis, TXCell/Lentigen Technology).

  8. IEA-NEA Nuclear Technology Road-map Update - Asia Stakeholder Engagement Workshop

    International Nuclear Information System (INIS)

    Tam, Cecilia; ); Paillere, Henri; ); Guoxing, Gu; Tianmin, Xin; Autebert, Remy; Murphy, Paul; Barkatullah, Nadira; Nkong-Njock, Vincent; Dubinsky, Melissa; Cordero, Didier

    2014-01-01

    In 2010, the International Energy Agency (IEA) and the Nuclear Energy Agency (NEA) released a Nuclear Energy Technology Road-map which outlined the steps needed to accelerate the development of nuclear power and its role in achieve deep greenhouse-gas emissions reduction. Both the global energy sector and the outlook for nuclear have changed significantly since then and an update of this Road-map is currently underway. The IEA and NEA held a stakeholder dialogue meeting focused on nuclear develop in Asia on 25 February 2014 in Hong Kong. The meeting brought together key stakeholders from industry, government, finance and other relevant organisations from Asia and beyond to help define and prioritise key items to be discussed in the IEA/NEA's Nuclear Road-map Update. One of the expected outcomes of this intensive brainstorming and Road-map development session was to discus key targets, milestones, policy measures and other actions needed to support the development and deployment of nuclear power. The workshop was organized in 3 sessions dealing with: Session 1 - Technology development needs for nuclear (Reactor technology, Fuel cycle and decommissioning); Session 2 - Breakout Discussion: - Group I: Financing nuclear. This session focussed on today's reality for financing nuclear and the current economics of nuclear. Mechanisms such as government loan guarantees, vendor financing and role of export credit agencies were discussed. Participants were asked to share lessons learnt and current practices on financing nuclear as well as recommendations (if needed) for additional policy support or changes in technology development (e.g. SMR) which would facilitate greater deployment of nuclear technologies. - Group II: Nuclear regulation and safety. This session focussed on regulatory needs for enhanced security and regulation for new build programmes, institutional development requirements for new nuclear countries. Safety research following the Fukushima Daiichi accident

  9. Corrosion issues in nuclear industry today

    International Nuclear Information System (INIS)

    Cattant, F.; Crusset, D.; Feron, D.

    2008-01-01

    In the context of global warming, nuclear energy is a carbon-free source of power and so is a meaningful option for energy production without CO 2 emissions. Currently, there are more than 440 commercial nuclear reactors, accounting for about 15% of electric power generation in the world, and there has not been a major accident in over 20 years. The world's fleet of nuclear power plants is, on average, more than 20 years old. Even though the design life of a nuclear power plant is typically 30 or 40 years, it is quite feasible that many nuclear power plants will be able to operate for longer than this. The re-emergence of nuclear power today is founded on the present generation of nuclear reactors meeting the demands of extended service life, ensuring the cost competitiveness of nuclear power and matching enhanced safety requirements. Nuclear power plant engineers should be able to demonstrate such integrity and reliability of their system materials and components as to enable nuclear power plants to operate beyond their initial design life. Effective waste management is another challenge for sustainable nuclear energy today; more precisely, a solution is needed for the management of high-level and long-lived intermediate-level radioactive waste over the very long term. Most nuclear countries are currently gathering the data needed to assess the feasibility of a deep geological waste repository, including the prediction of the behaviour of materials over several thousands of years. The extended service life of nuclear power plants and the need for permanent disposal for nuclear waste are today's key issues in the nuclear industry. We focus here on the major role that corrosion plays in these two factors, and on the French approaches to these two issues. (authors)

  10. Future trends for electrolysers in nuclear industry

    International Nuclear Information System (INIS)

    Manifar, T.; Robinson, J.; Ozemoyah, P.; Robinson, V.; Suppiah, S.; Boniface, H.

    2011-01-01

    The nuclear industry, through the application of electrolysers, can provide a solution to energy shortage with its competitive cost and can be one of the major future sources of hydrogen production with zero carbon emission. In addition, development of complementary, yet critical processes for upgrading or detritiation of the heavy water in the nuclear industry can be advanced with the application of electrolysers. Regardless of the technology, the electrolyser's development and application are facing many technical challenges including radiation and catalysis. In this paper, three main types of electrolysers are discussed along with their advantages and disadvantages. Proton Exchange Membrane (PEM) electrolysers look promising for hydrogen (or its isotopes) production. For this reason, Atomic Energy of Canada Limited (AECL) in collaboration with Tyne Engineering has started design and fabrication of PEM electrolysers with more than 60 Nm 3 /hr hydrogen production capacity for the application in nuclear industry. This electrolyser is being designed to withstand high concentrations of tritium. (author)

  11. Activities of nuclear human resource development in nuclear industry

    International Nuclear Information System (INIS)

    Tsujikura, Yonezo

    2010-01-01

    Since 2007, the JAIF (Japan Atomic Industrial Forum) had established the nuclear energy human resource development council to make analysis of the issue on nuclear human resource development. The author mainly contributed to develop its road map as a chairman of working group. Questionnaire survey to relevant parties on issues of nuclear human resource development had been conducted and the council identified the six relevant issues and ten recommendations. Both aspects for career design and skill-up program are necessary to develop nuclear human resource at each developing step and four respective central coordinating hubs should be linked to each sector participating in human resource development. (T. Tanaka)

  12. Diffusion of information about the nuclear industry

    International Nuclear Information System (INIS)

    Galvan, C.G.

    1983-01-01

    The diffusion of nuclear technology means a development of a large network of activities (e.g. capital goods, construction, metallurgical and chemical industries) than a path for solving energy problems. Its ties with the arms race cause specific non-proliferation problems. A close state-capital articulation emerges, which strengthens the subsumption of labour and introduces new processes of social control. Already fulfilled investments give impulse to this tendency. The Tlatelolco regime, banishing nuclear weapons from Latin America, seems to establish a pre-condition for a regional solution to the problems thus arising. But, besides the imperfect adhesion to the Treaty, technical and political reasons obstruct a regional integration of the nuclear fuel cycle. Among other things, a lack of regional integration in other industries makes nuclear expansion more dependent on extra-regional technological ties. (Author) [pt

  13. Big problems for Swedish nuclear industry

    International Nuclear Information System (INIS)

    Holmstroem, Anton; Runesson, Linda

    2006-01-01

    A report of the problems for Swedish nuclear industry the summer of 2006. A detailed description of the 25th of July incident at Forsmark 1 is provided. The incident was classified as level two on the INIS scale. The other Swedish nuclear plants were subject to security evaluations in the aftermath, and at Forsmark 2 similar weaknesses were found in the security system (ml)

  14. Burgundy, the exemplary success of nuclear industry

    International Nuclear Information System (INIS)

    Hugue, Didier

    2013-01-01

    This article comments the successful activity of mechanical and metallurgical industries in the French region of Burgundy in relationship with the nuclear sector. This is notably due to equipment renewal and to the continuity of the French nuclear program. Consequences are also positive for subcontracting small and medium-sized companies of the region. Collaborative action for exports is also an opportunity for the concerned companies, whether big or small

  15. Nuclear industry prepares fore shortage of engineers

    International Nuclear Information System (INIS)

    Gauker, Lynn.

    1991-01-01

    It is predicted that the Canadian nuclear industry will experience a shortage of qualified personnel within the next five to ten years. The reasons for this prediction are as follows: enrollment in engineering courses, particularly five courses in nuclear engineering has been declining; immigration can no longer be expected to fill the gap; the workforce is aging. Solutions may include promotional campaigns, student employment programs, and educating workers to a professional level

  16. The nuclear industry and its European markets

    International Nuclear Information System (INIS)

    1998-01-01

    This study gives an overview of the worldwide nuclear energy demand and reviews the different markets which are classified as 'mature' (uranium extraction, enrichment, conversion and reactors building), 'developing' (reprocessing, MOX fuel fabrication, maintenance and services) and 'emerging' (waste treatment and dismantling). Then, the study analyzes the evolution of demand and the answers of companies and presents the strategies and performances of nuclear industry leaders. (J.S.)

  17. The rebirth of the US nuclear industry

    International Nuclear Information System (INIS)

    Pitron, G.

    2008-01-01

    Fought during a long time by ecologists but recently rehabilitated by politicians, the US civil nuclear industry has started its comeback in the first power-consuming country of the world. Utilities and industrialists are already in action, and the first cooperation agreements with foreign groups, like EdF or Areva, have been signed. After three decades of stagnation, the US nuclear industry has to re-launch its fuel cycle activities, from the fuel enrichment to the waste management, and the recruitment of a new competent manpower is one of the main concerns. (J.S.)

  18. The nuclear industry - pollution and risks

    International Nuclear Information System (INIS)

    Fremlin, J.H.

    1985-01-01

    Unlike other power sources, the only pollution from the nuclear industry is radioactive pollution, which on average in Britain represents 0.2% of the annual dose due to natural background radiation. This 0.2% is not spread uniformly over the population and there is genuine concern about its effects where it is most concentrated. The only significant doses of radiation to the general public due to the nuclear industry are derived from the spent-fuel reprocessing plant at Sellafield, and in particular from the concentration of Caesium-134 and Caesium-137 in fish, Ruthenium-106 in edible seaweeds and plutonium in shellfish and in silt. The concern about the possible escape of high-level wastes stored at the Sellafield site is discussed, and the hazard compared with that dangerous chemicals stored at other industrial sites. The effects of pollution by the nuclear industry, based on the conventional and generally accepted view of radiation risks, add up to a few deaths per year in the 50 million population of England and Wales from an industry producing 15% of the electricity needs of those countries. When this is compared with the risk associated with other methods of electricity production, the author concludes that replacement by nuclear power of any major source of power using fossil fuel, with the possible exception of natural gas, would save lives

  19. C. The nuclear industry in Europe

    International Nuclear Information System (INIS)

    1976-01-01

    Most of the European states have made a large commitment to nuclear power. In some aspects, such as fast breeder technology and oxide fuel reprocessing, they clearly lead the rest of the world. The industry is highly competitive, and is able to win contracts over US firms, even though the products offered are basically of US designs. It is also characterised by a large degree of co-operation and dependency amongst member countries. Many developments and services are of a joint nature. To ensure growth in the industry, and reduce foreign involvement, many of the governments have bought large segments of domestic companies, often from US firms. Government agencies themselves have transformed their service departments (such as those involved in the fuel cycle business) so that they now operate under the guise of commercial enterprises. These steps have arisen principally because of the large financial commitments normally associated with nuclear power. As a result of this, and despite the recent economic depression, the nuclear industry in Europe generally appears healthy. It does not seem to be suffering to the same extent from the problems that the industry in the USA is currently facing. Even though some states are experiencing a decrease in the projected rate of growth of energy demand, expectations are that an increasing proportion of energy requirements in most European countries will be met from nuclear power. The industry, both for the construction of generating capacity and fuel cycle services, is anticipating growth and financial profit

  20. The European nuclear industry - an overview

    International Nuclear Information System (INIS)

    Berke, Claus

    1994-01-01

    In his talk, the President of Foratom, Dr. Claus Berke, reviews the present state of the nuclear industry in Europe. The European nuclear park is still the largest of any region in the world. In some countries, there has been a moratorium on new construction in recent years. This has made life for the supplying industry very difficult. One positive side-effect o at has been a significant rationalisation of the industry. In the course of this the previous vertical integration within European states has given place to the creation of important new transnational structures. In his talk, Dr. Berke describes some of the most important facets of the 'Europeanisation' of the industry, both in the area of power-plants and of the nuclear fuel-cycle. He also describes the increasing cooperation between utilities and suppliers in Western Europe and the operators of nuclear power plant in Eastern Europe, which is aimed at introducing a safety culture and an institutional framework in the East as close as possible to that which exists in Western Europe. Dr. Berke concludes that, over the coming years, both economic and environmental arguments will start to reverse the present political opposition, in many European countries, to new building programmes, and that the industry is likely be in a healthier state by the end of the decade

  1. Overview of the Russian nuclear industry

    International Nuclear Information System (INIS)

    2008-02-01

    In 2004, President Poutine decided to replace the atomic energy ministry (Minatom) by the federal atomic energy agency (Rosatom). Several projects were launched during the next two years which aimed at bringing back Russia to the fore front of the world leaders of nuclear energy use and nuclear technology export. In 2007, Rosatom agency was changed to a public holding company and a new company, named Atomenergoprom, was created which gathers all civil nuclear companies (AtomEnergoMash for the exploitation of power plants, Technabsexport (Tenex) specialized in enrichment or Atomstryexport in charge of export activities). Thus, Rosatom is at the head of all civilian and military nuclear companies, of all research centers, and of all nuclear and radiological safety facilities. In 2006, Russian nuclear power plants supplied 15.8% of the whole power consumption. Russia wishes to develop its nuclear program with the construction of new reactors in order to reach a nuclear electricity share of 25% from now to 2020. This paper presents first the 2007 institutional reform of the Russian atomic sector, and the three sectorial federal programmes: 1 - development of the nuclear energy industrial complex for the 2007-2010 era and up to 2015 (future power plants, nuclear fuel centers and reactor prototypes), 2 - nuclear safety and radioprotection for the 2008-2015 era (waste management, remedial actions, radiation protection), 3 - military program (confidential). Then, the paper presents: the international actions (export of Russian technology, cooperation agreements, non-proliferation), the situation of the existing nuclear park (reactors in operation, stopped, under construction and in project), the fuel cycle activities (production of natural uranium, enrichment, fuel fabrication, spent fuel storage, reprocessing, waste management), the nuclear R and D in Russia, and the nuclear safety authority. (J.S.)

  2. The nuclear industry in the European Community

    International Nuclear Information System (INIS)

    Gasterstaedt, N.

    1990-01-01

    In its reference program of 1984, the Commission presented the guidelines for the objectives in the field of nuclear electricity production within the Community. In addition, the effects have been investigated which concern the realization of these objectives for all persons involved in nuclear energy: local government, utility companies and industry. The question of nuclear energy is part of the general energy policy. Therefore, the reference program of 1984 was one of the elements which has been considered up to 1995 by the Council when defining the objectives for energy economy. The guidelines of the Commission in the reference program of 1984 are still valid today. It is important, however, to check the effects of the completion of the internal market on nuclear industry. Therefore, the Commission announced in its working program of 1989 that it will revise the reference nuclear program with regard to the prospects of the European internal market. The present document fulfills this obligation. The problems of the industry for the design and construction of nuclear power plants are treated intentionally. After the Commission for Economic and Social Affairs has given its statement, the commission will publish the document officially. (orig./UA) [de

  3. Ranking French nuclear industry on international market

    International Nuclear Information System (INIS)

    Labbe, B.

    1987-01-01

    Based on the success of its own ambitious nuclear power station program, France has been able to export its technology to many parts of the world, providing everything from individual components to complete power stations on a turnkey basis. Industrial partners who regurarly work together have set up the necessary structures to ensure the dovetailing of their activities during joint operations on the foreign market. These structures are matched to the needs of individual clients, and can be dispensed with completely in cases where a sole supplier is involved. Not one single unit under construction has been halted and no contract cancelled after the Chernobyl accident. France, like Japan and the USSR, is pressing on with its nuclear power program. China has ordered two PWR units for Daya Bay, while Britain has decided to construct its first PWR at Sizewell. Although a number of countries have deferred decisions in this field, this has been mainly on financial grounds. The French nuclear power industry has demonstrated its mastery of the technology, which can now be placed at the disposal of countries wishing to build nuclear power units, to improve their existing nuclear capacity, to develop parts of this future-oriented industry, or to supply their power stations with advanced nuclear fuel

  4. Competitiveness in Canada's nuclear industry

    International Nuclear Information System (INIS)

    Mirwald, R.

    1997-01-01

    Cameco, now a publicly traded company, mines and processes uranium. The mines are mostly in northern Saskatchewan. In 1996, Cameco increased its market share to about 15% of the western world's U 3 O 8 , and more than 20% of conversion to UF 6 . Cameco is the only commercial converter of uranium for Candu reactors. In 1996, sales were C$591 million. Net earnings last year were C$137.5 million - a fourfold increase over six years earlier - and long-term debt had been reduced to C$200 million. Cameco's position is secured by its substantial ownership position in Cigar Lake and McArthur River, the richest uranium deposits in the world. To answer questions by investors, Cameco has had to provide good public information about uranium and nuclear power

  5. Updated on effluents releases of the CEA nuclear fuel cycle facilities - 1995 to 2010 period

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Nelson Luiz Dias [Centro Tecnologico da Marinha em Sao Paulo (CTMSP) Sao Paulo, SP (Brazil)

    2011-07-01

    The environmental impact assessment of the Centro Experimental Aramar (CEA) facilities has been presented in a former work, based on the measured effluent releases data, for the period from 1995 to 2007. This work shows the update up to 2010. The effluents releases to the environment result from the routine operation of CEA nuclear fuel cycle facilities (LEI - Isotopic Enrichment Laboratory, USIDE - Pilot Plant for Industrial Verification of Uranium Enrichment and LABMAT - Nuclear Materials Laboratory). Basically, this work presents the radioactive release source terms, as described at the CEA Effluent Report sent to the National Commission for Nuclear Energy (CNEN) each semester, and a historical assessment of the critical group annual doses from 1995 up to 2010. The assessed doses are compared to the maximum dose constraint as well as to the exemption level specified by CNEN. (author)

  6. Updated on effluents releases of the CEA nuclear fuel cycle facilities - 1995 to 2010 period

    International Nuclear Information System (INIS)

    Ferreira, Nelson Luiz Dias

    2011-01-01

    The environmental impact assessment of the Centro Experimental Aramar (CEA) facilities has been presented in a former work, based on the measured effluent releases data, for the period from 1995 to 2007. This work shows the update up to 2010. The effluents releases to the environment result from the routine operation of CEA nuclear fuel cycle facilities (LEI - Isotopic Enrichment Laboratory, USIDE - Pilot Plant for Industrial Verification of Uranium Enrichment and LABMAT - Nuclear Materials Laboratory). Basically, this work presents the radioactive release source terms, as described at the CEA Effluent Report sent to the National Commission for Nuclear Energy (CNEN) each semester, and a historical assessment of the critical group annual doses from 1995 up to 2010. The assessed doses are compared to the maximum dose constraint as well as to the exemption level specified by CNEN. (author)

  7. National standards for the nuclear industry

    International Nuclear Information System (INIS)

    Laing, W.R.; Corbin, L.T.

    1981-01-01

    Standards needs for the nuclear industry are being met by a number of voluntary organizations, such as ANS, ASTM, AWS, ASME, and IEEE. The American National Standards Institute (ANSI) coordinates these activities and approves completed standards as American National Standards. ASTM has two all-nuclear committees, E-10 and C-26. A C-26 subcommittee, Test Methods, has been active in writing analytical chemistry standards for twelve years. Thirteen have been approved as ANSI standards and others are ready for ballot. Work is continuing in all areas of the nuclear fuel cycle

  8. Laser robot in the nuclear industry

    International Nuclear Information System (INIS)

    Contre, M.

    1987-05-01

    Possibilities of power lasers for welding, cutting, drilling, plugging surface treatment and hard-facing are reviewed. CO 2 and Nd:YAG lasers only have adequate power for nuclear applications. Radiation effects on lasers and contamination problems are examined. Then examples of applications to nuclear industry are given: PWR fuel fabrication, oxide thickness measurement in Magnox reactors, laser cutting of a cylindrical piece of steel on the bottom of a fuel channel in a gas graphite reactor, nuclear plant dismantling and fuel reprocessing. 51 refs [fr

  9. Microprocessors applications in the nuclear industry

    International Nuclear Information System (INIS)

    Ethridge, C.D.

    1980-01-01

    Microprocessors in the nuclear industry, particularly at the Los Alamos Scientific Laboratory, have been and are being utilized in a wide variety of applications ranging from data acquisition and control for basic physics research to monitoring special nuclear material in long-term storage. Microprocessor systems have been developed to support weapons diagnostics measurements during underground weapons testing at the Nevada Test Site. Multiple single-component microcomputers are now controlling the measurement and recording of nuclear reactor operating power levels. The CMOS microprocessor data-acquisition instrumentation has operated on balloon flights to monitor power plant emissions. Target chamber mirror-positioning equipment for laser fusion facilities employs microprocessors

  10. Crisis in the French nuclear industry

    International Nuclear Information System (INIS)

    Nectoux, F.

    1991-02-01

    This report discusses the economics of the French nuclear power industry. It considers the dominant position of nuclear power in the French energy system, stresses the scale and causes of the current (1990) economic crisis and dispels the popular misconceptions on the cost efficiency of the French programme. The evidence is based on widely available French documents and articles. The report begins by looking at the background of nuclear power in France then discusses the problem of overcapacity, the technical problems and fall in load factors, generating costs and electricity prices and finally, strategic issues are considered. (UK)

  11. Ion exchange in the nuclear power industry

    International Nuclear Information System (INIS)

    Lehto, J.

    1993-01-01

    Ion exchangers are used in many fields in the nuclear power industry. At nuclear power plants, organic ion exchange resins are mainly used for the removal of ionic and particulate contaminants from the primary circuit, condensate and fuel storage pond waters. Ion exchange resins are used for the solidification of low- and medium-active nuclear waste solutions. The number of applications of zeolites, and other inorganic ion exchangers, in the separation of radionuclides from nuclear waste solutions has been increasing since the 1980s. In nuclear fuel reprocessing plants, ion exchange is used for the solidification of low- and medium-active waste solutions, as well as for the partitioning of radioactive elements for further use. (Author)

  12. Nuclear relations with administrations of industry services

    International Nuclear Information System (INIS)

    Bernardez Garcia, A.

    2011-01-01

    The object of the article is to try to answer to the following question that can arise to the holder of a nuclear power station: What Administration of Industry must I myself direct to be able to support my complementary facilities of Industrial Security inside the in force legality?. The raised discussion arise between if the competent administration for the legal steps, is the Central Administration across his delegates and sub delegates of government, or is of the Territorial Services of Industry of Autonomous communities. (Author)

  13. An industry update: the latest developments in therapeutic delivery.

    Science.gov (United States)

    Simpson, Iain

    2018-01-01

    This industry update covers the period from 1 September through 30 September 2017, and is based on information sourced from company press releases, scientific literature, patents and various news websites. The month saw the US FDA approve three new molecular entities, Aliqopa (copanlisib dihydrochloride) (Bayer Healthcare); Solosec (secnidazole) (Symbiomix Therapeutics) and Verzenio (abemaciclib) (Eli Lilly and Co). Intarcia Therapeutics Inc. has its application for approval of a novel drug device combination of exenatide for the treatment of diabetes rejected by FDA but said that it will work to address the concerns and refile the application. The impact of biosimilars in the market is steadily increasing with seven biosimilars approved in the USA and Sandoz hoping to add to this with its announcement that FDA has accepted its Biologics License Application for a biosimilar version of Roche's Rituxan. Circassia announced positive top line results of a respiratory drug, Duaklir (for the treatment of chronic obstructive pulmonary disease) and Sarepta (for its new treatment for Duchenne muscular dystrophy). Axovant Sciences Ltd announced the failure if its drug Intepirdine in the treatment of Alzheimer's, adding to a growing list of drug failures in this area. There were a number of developments in the area of oncology with Bristol-Myers Squibb and Infinity Pharmaceuticals announcing an expansion of their collaboration looking at combination treatments, as well as Eli Lilly and Co's approval for Verzenio. Rani Therapeutics and Intra-Cellular Therapies announced successful funding rounds to support their drug programs. Allergan announced a novel licensing deal for its dry eye drug, Restasis, which it hopes would allow it to stave off patent challenges from several companies looking to develop generic versions of the drug. New research suggests that loss of sense of smell can be linked to an increased risk of developing Parkinson's disease.

  14. Reviewing industrial safety in nuclear power plants

    International Nuclear Information System (INIS)

    1990-02-01

    This document contains guidance and reference materials for Operational Safety Review Team (OSART) experts, in addition to the OSART Guidelines (TECDOC-449), for use in the review of industrial safety activities at nuclear power plants. It sets out objectives for an excellent industrial safety programme, and suggests investigations which should be made in evaluating industrial safety programmes. The attributes of an excellent industrial safety programme are listed as examples for comparison. Practical hints for reviewing industrial safety are discussed, so that the necessary information can be obtained effectively through a review of documents and records, discussions with counterparts, and field observations. There are several annexes. These deal with major features of industrial safety programmes such as safety committees, reporting and investigation systems and first aid and medical facilities. They include some examples which are considered commendable. The document should be taken into account not only when reviewing management, organization and administration but also in the review of related areas, such as maintenance and operations, so that all aspects of industrial safety in an operating nuclear power plant are covered

  15. Psychological attitudes of nuclear industry workers

    International Nuclear Information System (INIS)

    Faes, M.; Stoppie, J.

    1976-01-01

    An investigation was carried out within the frame of occupational medicine on the psychological attitudes of workers in the nuclear industry towards ionizing radiations. Three aspects were considered: awareness of the danger; feeling of safety in the working environment; workers' feelings following incidents or accidents; satisfaction level felt by the workers in the plant [fr

  16. Knowledge preservation in the nuclear industry

    International Nuclear Information System (INIS)

    Yanev, Y.

    2004-01-01

    The paper presents examples of knowledge loss in different areas related to attrition, retirements or layoff as well as the consequences of the loss of knowledge. The nature of the so called tacit knowledge and its role as a barrier to knowledge preservation is discussed. Strategies for knowledge preservation in the nuclear industry are presented

  17. High performance structural ceramics for nuclear industry

    International Nuclear Information System (INIS)

    Pujari, Vimal K.; Faker, Paul

    2006-01-01

    A family of Saint-Gobain structural ceramic materials and products produced by its High performance Refractory Division is described. Over the last fifty years or so, Saint-Gobain has been a leader in developing non oxide ceramic based novel materials, processes and products for application in Nuclear, Chemical, Automotive, Defense and Mining industries

  18. The human factor in the nuclear industry

    International Nuclear Information System (INIS)

    Colas, Armand

    1998-01-01

    After having evoked the progressive reduction and stabilization of significant incidents occurring every year in French nuclear power plants, and the challenges faced by nuclear energy (loss of public confidence, loss of competitiveness), and then outlined the importance of safety to overcome these challenges, the author comments EDF's approach to the human factor. He first highlights the importance of information and communication towards the population. He briefly discusses the meaning of human factors for the nuclear industry, sometimes perceived as the contribution people to the company's safety and performance. He comments the evolution observed in the perception of human error in different industrial or technical environments and situations, and outlines what is at stake to reduce the production of faults and organize a 'hunt for latent defects'

  19. The nuclear industry's communication efforts viewed from outside the industry

    International Nuclear Information System (INIS)

    Tuck, Moira

    1995-01-01

    This paper describes the attitude towards nuclear power of a company specialised in behavioural communication, not employed exclusively by the nuclear power industry. Only one of it's clients has a nuclear interest and that is Eskom, South Africa electricity utility which runs 21 active power stations of which 13 are fossil-fueled, 2 hydro, 2 pump storage stations, 3 gas turbine stations and 1 nuclear. This company is a firm believer in the nuclear energy option for some very practical reasons and one or two abstract reasons. The practical reasons are the ones well known, the world needs ever-increasing amounts of base load energy in order to increase the quality of life. The world also needs clean energy so that the planet can be preserved beyond the next generation. The abstract reasons are perhaps 'not so often' thought about by nuclear, communication practitioners: in harnessing nuclear energy for the service of mankind humans have captured a miracle. The harnessing of nuclear energy is a mark of man's ability to think conceptually, to walk in the realms of the unseen and bring back from those realms a tool of progress. In more prosaic terms, the loss of nuclear expertise would, very simply be a retrogression of the human race. As behavioural communication specialist it s our job to find ways for our clients to speak truthfully about their endeavours to the hearts of their audience. It is not our job to (nor will we) either lie or cover up for our clients. That which is wrong is wrong and cannot be painted rightly spoken words or clever videos or ingenious advertising. In all cases our advice to our clients has been to assume that people will not argue against the greater good of humanity. And there is much about nuclear power that contributes to the greater good: of humanity. 'That is the factor that, is common to all of us in this room today and all our colleagues in the industry. W have only to tell the truth with words that our target audiences can

  20. A telerobot for the nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    Industrial robots are not widely used in the nuclear industry. More use is made of telemanipulators, in which tasks are performed under total human control via a master-slave actuation system. AEA Technology have developed a Nuclear Engineered Advanced TEle Robot (NEATER), a telerobot which combines industrial robot technology with the skills of a human operator. It has been designed for use in radioactive decommissioning work and has a number of radiation tolerant properties. NEATER can be operated in a pure robotic mode using a standard computer controller and software. Or it can operate as a telerobot in a remote control mode via a television input. In this mode the operator controls the robot's movement by using a joystick or a simple six degrees of freedom input device. (UK)

  1. The future of the nuclear plant industry

    International Nuclear Information System (INIS)

    Franklin, N.L.

    Against the background of world-wide controversy, the future of nuclear power in the United Kingdom is discussed. The various forecasts of electricity demand are considered in relation to the need for long-term planning in the nuclear industry. It is considered that towards the end of the century uranium will be in short supply for technical or political reasons, and that the emphasis would then be on the use of fast reactors (assuming nuclear power to be politically acceptable at that time). A possible UK programme is outlined, and the question of cooperation with other countries is referred to. Thermal reactors for use in the middle term are discussed. The possibilities of export are considered briefly. The effects of world economic recession, public opposition on environmental and other grounds, and the possibility of misuse of nuclear materials are considered. (U.K.)

  2. Exporting nuclear engineering and the industry's viewpoint

    International Nuclear Information System (INIS)

    Barthelt, K.

    1986-01-01

    Nuclear energy offers all possibilities to reduce the energy problems in the world which arise with the world-wide increasing population and the energy demand connected with it. The Federal Republic of Germany lives on the exports of refined technical methods which also include nuclear engineering. The exports of nuclear engineering should lead to a technology transfer with guidance and training on an equal basis between the industrial and developing countries. The preconditions of exporting nuclear-technical systems are a well-functioning domestic market and a certain support by the government, especially with regard to giving guarantees for the special exports risks of these big projects. On the other hand, exports are also needed in order to be able to continue providing high-level technology for the domestic market. (UA) [de

  3. Nuclear industry after the Fukushima accident

    International Nuclear Information System (INIS)

    Branche, Thomas; Billes-Garabedian, Laurent; Salha, Bernard; Behar, Christophe; Dupuis, Marie-Claude; Labalette, Thibaud; Lagarde, Dominique; Planchais, Bernard; West, Jean-Pierre; Stubler, Jerome; Lancia, Bruno; Machenaud, Herve; Einaudi, Andre; Anglaret, Philippe; Brachet, Yves; Bonnave, Philippe; Knoche, Philippe; Gasquet, Denis

    2013-01-01

    This special dossier about the situation of nuclear industry two years after the Fukushima accident comprises 15 contributions dealing with: the nuclear industry two years after the Fukushima accident (Bernard Salha); a low-carbon electricity at a reasonable cost (Christophe Behar); nuclear engineering has to gain even more efficiency (Thomas Branche); how to dispose off the most radioactive wastes (Marie-Claude Dupuis, Thibaud Labalette); ensuring the continuation for more than 40 years onward (Denis Gasquet); developing and investing in the future (Philippe Knoche); more than just signing contracts (Dominique Lagarde); immersed power plants, an innovative concept (Bernard Planchais); R and D as a source of innovation for safety and performances (Jean-Pierre West); dismantlement, a very long term market (Jerome Stubler, Bruno Lancia); a reference industrial model (Herve Machenaud); recruiting and training (Andre Einaudi); a diversity of modern reactors and a world market in rebirth (Philippe Anglaret); an industrial revolution is necessary (Yves Brachet); contracts adapted to sensible works (Philippe Bonnave)

  4. UK strategy for nuclear industry LLW - 16393

    International Nuclear Information System (INIS)

    Clark, Matthew; Fisher, Joanne

    2009-01-01

    In March 2007 the UK Government and devolved administrations (for Scotland, Wales and Northern Ireland, from here on referred to as 'Government') published their policy for the management of solid low level waste ('the Policy'). The Policy sets out a number of core principles for the management of low level waste (LLW) and charges the Nuclear Decommissioning Authority with developing a UK-wide strategy in the case of LLW from nuclear sites. The UK Nuclear Industry LLW Strategy has been developed within the framework of the principles set out in the policy. A key factor in the development of this strategy has been the strategic partnership the NDA shares with the Low Level Waste Repository near Drigg (LLWR), who now have a role in developing strategy as well as delivering an optimised waste management service at the LLWR. The strategy aims to support continued hazard reduction and decommissioning by ensuring uninterrupted capability and capacity for the management and disposal of LLW in the UK. The continued availability of a disposal route for LLW is considered vital by both the nuclear industry and non-nuclear industry low level waste producers. Given that the UK will generate significantly more low level waste (∼ 3.1 million m 3 ) than there is capacity at the LLWR (∼0.75 million m 3 ), developing alternative effective ways to manage LLW is critical. The waste management hierarchy is central to the strategy, which includes strategic goals at all levels of the hierarchy to improve its application across the industry. (authors)

  5. UNENE: an update on nuclear education and research

    International Nuclear Information System (INIS)

    Shalaby, B.A.; Snell, V.G.; Rouben, B.

    2011-01-01

    University Network for Excellence in Nuclear Engineering (known as UNENE) was created in 2002 as a partnership between Industry and universities with the objectives of establishing a nuclear R and D program in universities to train and develop Highly Qualified Personnel (HQP) to address the demographic gap and to create a sustainable source of expertise for independent industry and public consultation. Seven years into its creation, UNENE is now a well established and fully functional framework with programs mainly focussing on education and research serving the industry at large. The educational component is in the form of an M. Eng program mainly catering for working profession's by being offered on weekends and using distance learning tools. It is intended to enhance competencies and build knowledge for students. The R and D programs are lead by Industrial Research chairs (IRCs) and other prominent researchers in areas of importance to the industry. This paper examines the above topics and its outcomes as of March 2010. (author)

  6. UNENE: an update on nuclear education and research

    Energy Technology Data Exchange (ETDEWEB)

    Shalaby, B.A.; Snell, V.G.; Rouben, B., E-mail: basma.shalaby@rogers.com, E-mail: vgsolutions@rogers.com, E-mail: rouben@alum.mit.edu [University Network for Excellence in Nuclear Engineering (UNENE), Hamilton, Ontario (Canada)

    2011-09-15

    University Network for Excellence in Nuclear Engineering (known as UNENE) was created in 2002 as a partnership between Industry and universities with the objectives of establishing a nuclear R and D program in universities to train and develop Highly Qualified Personnel (HQP) to address the demographic gap and to create a sustainable source of expertise for independent industry and public consultation. Seven years into its creation, UNENE is now a well established and fully functional framework with programs mainly focussing on education and research serving the industry at large. The educational component is in the form of an M. Eng program mainly catering for working profession's by being offered on weekends and using distance learning tools. It is intended to enhance competencies and build knowledge for students. The R and D programs are lead by Industrial Research chairs (IRCs) and other prominent researchers in areas of importance to the industry. This paper examines the above topics and its outcomes as of March 2010. (author)

  7. UNENE: an update on nuclear education and research

    International Nuclear Information System (INIS)

    Shalaby, B.A.; Snell, V.G.; Rouben, B.

    2010-01-01

    University Network of Excellence in Nuclear Engineering (known as UNENE) was created in 2002 as a partnership between Industry and universities with the objectives of establishing a nuclear R and D program in universities, train and develop Highly Qualified Personnel (HQP) to address the demographic gap, and to create a sustainable source of expertise for independent industry and public consultation. Seven years into its creation, UNENE is now a well established and fully functional framework with programs mainly focussing on education and research serving the industry at large. The educational component is in the form of an M. Eng. program mainly catering for working professionals by being offered on weekends and using distance-learning tools. It is intended to enhance competencies and build knowledge for students. The R and D programs are led by Industrial Research chairs (IRCs) and other prominent researchers in areas of importance to the industry. This paper examines the above topics and its outcomes as of March 2010. (author)

  8. The World Nuclear Industry Status Report 2015

    International Nuclear Information System (INIS)

    Schneider, Mycle; Froggatt, Antony; Hazemann, Julie; Katsuta, Tadahiro; Ramana, M.V.; Thomas, Steve; Porritt, Jonathon

    2015-07-01

    The World Nuclear Industry Status Report 2015 provides a comprehensive overview of nuclear power plant data, including information on operation, production and construction. The WNISR assesses the status of new-build programs in current nuclear countries as well as in potential newcomer countries. Japan without nuclear power for a full calendar year for the first time since the first commercial nuclear power plant started up in the country 50 years ago. Nuclear plant construction starts plunge from fifteen in 2010 to three in 2014. 62 reactors under construction - five fewer than a year ago - of which at least three-quarters delayed. In 10 of the 14 building countries all projects are delayed, often by years. Five units have been listed as 'under construction' for over 30 years. Share of nuclear power in global electricity mix stable at less than 11% for a third year in a row. AREVA, technically bankrupt, downgraded to 'junk' by Standard and Poor's, sees its share value plunge to a new historic low on 9 July 2015-a value loss of 90 percent since 2007 China, Germany, Japan-three of the world's four largest economies-plus Brazil, India, Mexico, the Netherlands, and Spain, now all generate more electricity from non-hydro renewables than from nuclear power. These eight countries represent more than three billion people or 45 percent of the world's population. In the UK, electricity output from renewable sources, including hydropower, overtook the output from nuclear. Compared to 1997, when the Kyoto Protocol on climate change was signed, in 2014 there was an additional 694 TWh per year of wind power and 185 TWh of solar photovoltaics- each exceeding nuclear's additional 147 TWh

  9. Political crisis poses problems for nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Mitev, Lubomir [NucNet, Brussels (Belgium)

    2014-11-15

    The political crisis in Ukraine has given rise to several problematic issues for the nuclear industry, including the country's obvious dependence on Russia for nuclear fuel supplies and the transport of nuclear material. A 2013 report by the Polish Institute of International Affairs (PIIA) concluded that Ukraine will lean towards the development of ''intensive cooperation'' with Western nuclear regulators and companies as it seeks to increase its control over the sector and reduce its dependency on Russia. The PIIA report said the gas crises of 2006 and 2009, and especially the current destabilisation of the country, have highlighted Ukraine's ''excessive and problematic dependence'' on energy supply from Russia. The 'Energy Strategy of Ukraine Until 2030' assumes that the share of nuclear energy will remain the same in 2030 as it was in 2005 - about 50 % of the energy mix. To achieve its goals, Ukraine's strategy envisages several priority actions. Firstly, work should begin on identification of three or four sites for new nuclear stations. Secondly, the plan says that Khmelnistki-3 and -4 should be completed by 2016. Thirdly, the plan envisages six gigawatts of new nuclear capacity becoming operational between 2019 and 2021. Finally, lifetime extensions are planned for South Ukraine units 1 to 3, Zaporozhye units 1 to 6, Rovno units 2 and 3 and Khmelnitski-1.

  10. Nuclear engineering. Stable industry for bright minds

    International Nuclear Information System (INIS)

    Geisler, Maja

    2009-01-01

    The Deutsches Atomforum (DAtF) invited 35 students and graduate students for 'colloquies for professional orientation' to Luenen on March 8-11, 2009. Another 39 students were guests in Speyer between March 15 and 18 this year. Participants included graduates in physics, chemistry, radiation protection, and mechanical engineering as well as students of process engineering, electrical engineering and environmental technology. The colloquies for professional orientation are a service provided by the Informationskreis Kernenergie (IK) to member firms of DAtF. At the same time, the IK in this way fulfils its duty to promote young scientists and engineers within the framework of the DAtF's basic public relations activities. After all, nuclear technology in Germany is not about to end its life. Firms with international activities are in urgent need of highly qualified young staff members. Personnel is needed for a variety of activities ranging from nuclear power plant construction to fuel fabrication to waste management and the demolition and disposal of nuclear power plants. All these areas are in need of new qualified staff. Some 750 students so far have attended the DAtF colloquies for professional orientation since 2002. Many participants were hired by industries straight away or were given opportunities as trainees or students preparing their diploma theses in the nuclear industry. These contacts with the nuclear industry should not remain a one-off experience for the students. For this reason, the IK invites the participants in colloquies again this year to attend the Annual Meeting on Nuclear Technology in Dresden on May 12-14, 2009. (orig.)

  11. Nuclear industry prospects: A Canadian perspective

    International Nuclear Information System (INIS)

    Morden, Reid

    1995-01-01

    Canada, with its proven, safe and versatile CANDU reactor is well poised for the second half-century of nuclear fission. Canada's nuclear pedigree goes back to the turn-of-the-century work of Ernest Rutherford in Montreal. This year, Canada's nuclear industry celebrates the 50th anniversary of the start-up of its first research reactor at Chalk River. Last year, the pioneering work of Bert ram Blockhouse in Physics was honoured with a Nobel Prize. Future international success for the nuclear industry, such as has been achieved here in Korea, depends on continued cooperative and collaborative team work between the public and private sectors, continued strong research and development backing by the government, and new strategic partnerships. The biggest challenge is financing for the emerging markets. The brightness or dimness of future prospects are relative to the intensity of the lessons learned from history. In Canada we have a fairly long nuclear pedigree, It goes back almost a century to 1898, when Ernest Rutherford set up a world centre at McGill University in Montreal for research into the structure of the atom and into radioactivity

  12. Quality management certification for the nuclear industry

    International Nuclear Information System (INIS)

    Wilmer, T.J.

    1993-01-01

    Historically for safety critical items, the United Kingdom nuclear companies either conducted their own inspection and audit of suppliers or sub-contracted staff to do so on their behalf. However, it is becoming unrealistic for these services to be undertaken in-house for economic reasons. The power industry is looking outside its own immediate expertise to that of 3rd Party Certification Bodies. There is a danger of introducing an element of risk unless the Certification Body really does understand the industry and its requirements. The Nuclear Installations Inspectorate (NII) makes it mandatory for nuclear installations to have in place Quality management systems that meet the requirements of BS 5882. This standard requires the use of quality assurance programmes and a greater degree of understanding of nuclear regulations and codes of practice than is required by BS 5750. This is a very significant factor, recognising as it does the need to harmonise the management interface between an operator of a nuclear installation and suppliers to that same installation. (author)

  13. Domestic safeguards in the nuclear industry

    International Nuclear Information System (INIS)

    Uhrig, R.E.

    1979-01-01

    The Energy Reorganization Act of 1974 brought about markedly increased security requirements at nuclear power plants. NRC established a threat level against which the security forces were expected to defend. It is asserted that an inadequate legal basis exists for the NRC requirement that nuclear plants be defended by the use of deadly force, if necessary, and that complex issues such as apprehension, retention, and pursuit of intruders are left vague. Security measures patterned after the airline industry, resolution of the deadly force issue, and definition of a creditable threat level are proposed

  14. Economics on nuclear techniques application in industry

    International Nuclear Information System (INIS)

    Kato, Masao

    1979-01-01

    The economics of the application of nuclear techniques to industry is discussed. Nuclear techniques were applied to gauging (physical measurement), analysis, a radioactive tracer method, electrolytic dissociation, and radiography and were found to be very economical. They can be applied to manufacturing, mining, oceano-engineering, environmental engineering, and construction, all of which have a great influence on economics. However, because the application of a radioactive tracer technique does not have a direct influence on economics, it is difficult to estimate how beneficial it is. The cost-benefit ratio method recommended by IAEA was used for economical calculations. Examples of calculations made in gauging and analysis are given. (Ueda, J.)

  15. Nuclear techniques in coal and chemical industries

    International Nuclear Information System (INIS)

    Elbern, A.W.; Leal, C.A.

    1980-01-01

    The use of nuclear techniques for the determination of important parameters in industrial installations is exemplified; advantages of these techniques over other methods conventionally used are pointed out. The use of radiotracers in the study of physical and chemical phenomena occurring in the chemical industry is discussed. It is also shown that, using certain radioisotopes, it is possible to construct devices which enable, for example, the determination of the ash content in coal samples. These devices are economical and easy to be installed for the on-line control during coal transportation. (C.L.B.) [pt

  16. NLSdb-major update for database of nuclear localization signals and nuclear export signals.

    Science.gov (United States)

    Bernhofer, Michael; Goldberg, Tatyana; Wolf, Silvana; Ahmed, Mohamed; Zaugg, Julian; Boden, Mikael; Rost, Burkhard

    2018-01-04

    NLSdb is a database collecting nuclear export signals (NES) and nuclear localization signals (NLS) along with experimentally annotated nuclear and non-nuclear proteins. NES and NLS are short sequence motifs related to protein transport out of and into the nucleus. The updated NLSdb now contains 2253 NLS and introduces 398 NES. The potential sets of novel NES and NLS have been generated by a simple 'in silico mutagenesis' protocol. We started with motifs annotated by experiments. In step 1, we increased specificity such that no known non-nuclear protein matched the refined motif. In step 2, we increased the sensitivity trying to match several different families with a motif. We then iterated over steps 1 and 2. The final set of 2253 NLS motifs matched 35% of 8421 experimentally verified nuclear proteins (up from 21% for the previous version) and none of 18 278 non-nuclear proteins. We updated the web interface providing multiple options to search protein sequences for NES and NLS motifs, and to evaluate your own signal sequences. NLSdb can be accessed via Rostlab services at: https://rostlab.org/services/nlsdb/. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  17. Update neutron nuclear data evaluation for 236,238Np

    International Nuclear Information System (INIS)

    Chen, Guochang; Wang, Jimin; Yu, Baosheng; Cao, Wentian; Tang, Guo-you

    2015-01-01

    The nuclear data with high accuracy for actinides play an important role in nuclear technology applications, including reactor design and operation, fuel cycle, estimation of the amount of minor actinides (MAs) in high burnup reactors and to research to transmute the MAs to short half-lived nuclides or stable ones. The nuclides of 236 Np are generated via the α-decay of 240 Am or 237 Np(n, 2n) and 237 Np(d, t) reactions. And the nuclides of 238 Np are generated via the α-decay of 242 Am or 237 Np(n, γ) and 237 Np(d, p) reactions. In the present work, according to the systematic trend of the total cross section and elastic cross section etc. of different Np isotopes, and based on the neutron optical model parameters (OMP) of 237 Np, a new set of neutron optical model parameters were obtained for 236,238 Np. Based on the new set OMP and the systematic trend of the cross sections of different Np isotopes, a full set of 236,238 Np neutron nuclear data has been updated and improved by theoretical calculation. The present result has significant improvements over the data in CENDL-3.1

  18. An analysis of nuclear plant operating costs: A 1991 update

    International Nuclear Information System (INIS)

    1991-05-01

    This report updates a 1988 Energy Information Administration (EIA) report which examined trends in nonfuel operating costs at the Nation's nuclear power plants. Nonfuel operating costs are comprised of operating and maintenance (O ampersand M) costs and capital expenditures incurred after a plant begins operating. Capital expenditures are typically called ''capital additions'' because the costs are added to the utility's rate base and recovered as a depreciation expense over several years, the number of years being regulated by State Public Utility Commissions. These costs consist of large maintenance expenditures needed to keep a plant operational as well as those needed to make plant modifications mandated by the Nuclear Regulatory Commission (NRC) or implemented at the utility's discretion. The 1988 report found that from 1974 through 1984, the last year for which data were available, nuclear power plant nonfuel operating costs escalated by 14 percent annually in real terms. The objective of the present study was to determine whether trends in nonfuel operating costs have changed since 1984, if there was any change in the underlying factors influencing these costs, and if so, how these changes affect the basic conclusions of the 1988 report. The general trends are encouraging: Total nonfuel operating costs peaked in 1984 and have been lower since that time; O ampersand M costs have been rising, but at a much lower rate than seen from 1974 through 1984; capital additions costs have actually been declining. 9 figs., 12 tabs

  19. The nuclear industry and public hearings

    International Nuclear Information System (INIS)

    Mansillon, Y.

    2007-01-01

    Major decisions about the French nuclear industry have been made, it is often said, without sufficiently informing and consulting the population. Laws in 1995 and 2002 provide for public hearings in order to inform the public and obtain its reactions to big projects of national interest. The responsibility for organizing a hearing is vested in an independent administrative authority, the National Commission of Public Debate (CNDP). Within 2 years, 5 issues related to the nuclear industry have been referred to it: 1) the ITER project at Cadarache in april 2003, 2) the George-Besse-II project to replace the present uranium enrichment plant at Tricastin in april 2004, 3) the research reactor Jules-Horowitz project at Cadarache in july 2004, 4) the EPR project at Flamanville in november 2004, and 5) the management of radioactive wastes in february 2005. The hearings already represent a fundamental innovation compared with earlier practices

  20. Evolution of stainless steels in nuclear industry

    International Nuclear Information System (INIS)

    Tavassoli, Farhad

    2010-01-01

    Starting with the stainless steels used in the conventional industry, their adoption and successive evolutions in the nuclear industry, from one generation of nuclear reactors to another, is presented. Specific examples for several steels are given, covering fabrication procedures, qualification methods, property databases and design allowable stresses, to show how the ever-increasing demands for better performance and reliability, in particular under neutron irradiation, have been met. Particular attention is paid to the austenitic stainless steels types 304L, 316L, 316L(N), 316L(N)-IG, titanium stabilized grade 321, precipitation strengthened alloy 800, conventional and low activation ferritic/martensitic steels and their oxygen dispersion strengthening (ODS) derivatives. For each material, the evolution of the associated filler metal and welding techniques are also presented. (author)

  1. Computer aided design for the nuclear industry

    International Nuclear Information System (INIS)

    Basson, Keith

    1986-01-01

    The paper concerns the new computer aided design (CAD) centre for the United Kingdom nuclear industry, and its applications. A description of the CAD system is given, including the current projects at the CAD centre. Typical applications of the 3D CAD plant based models, stress analysis studies, and the extraction of data from CAD drawings to produce associated documentation, are all described. Future developments using computer aided design systems are also considered. (U.K.)

  2. Problems and prospects of nuclear power industry

    International Nuclear Information System (INIS)

    Karelin, A.I.

    2001-01-01

    A consideration is given to problems associated with operating nuclear power plants in many countries and building new NPPs. A special attention is given to safety operation of nuclear plants, to reprocessing and transportation of spent nuclear fuel as well as to radioactive waste disposal. In connection with difficulties in solving the above-mentioned problems a proposition is made to resume work on designing NPPs with the use of nuclear liquid salt reactors based on molten fuel fluoride salts. Advantages and disadvantages of fuel compositions of LiF-BeF 2 -UF 4 -(ThF 4 ) are listed. It is recommended that fundamental studies be carried out into such compositions as KF + CsF; BaF 2 + KF + NaF; AlF 3 + Na 3 AlF 6 , eutectics on the basis of tin and zinc fluorides and their complex salts of M x Sn(Zn)F y . An international program is suggested to be developed to find some way out of crisis of nuclear power industry using research efforts in homogeneous liquid salt nuclear underground reactors with a U(233)-Th fuel cycle [ru

  3. Nuclear energy and the steel industry

    International Nuclear Information System (INIS)

    Barnes, R.S.

    1977-01-01

    Fossil fuels represent a large part of the cost of iron and steel making and their increasing cost has stimulated investigation of methods to reduce the use of fossil fuels in the steel industry. Various iron and steel making routes have been studied by the European Nuclear Steelmaking Club (ENSEC) and others to determine to what extent they could use energy derived from a nuclear reactor to reduce the amount of fossil fuel consumed. The most promising concept is a High-Temperature Gas-Cooled Nuclear Reactor heating helium to a temperature sufficient to steam reform hydrocarbons into reducing gases for the direct reduction of iron ores. It is proposed that the reactor/reformer complex should be separate from the direct-reduction plant/steelworks and should provide reducing gas by pipeline, not only to a number of steel works but to other industrial users. The composition of suitable reducing gases and the methods of producing them from various feedstocks are discussed. Highly industrialised countries with large steel and chemical industries have shown greatest interest in the concept, but those countries with large iron-ore reserves and growing direct capacity should consider the future value of the High-Temperature Gas-Cooled Reactor as a means of extending the life of their gas reserves. (author)

  4. Competency assessments for nuclear industry personnel

    International Nuclear Information System (INIS)

    2004-04-01

    In 1996, the IAEA published Technical Reports Series No. 380, Nuclear Power Plant Personnel Training and its Evaluation: A Guidebook. This publication provides guidance for the development, implementation and evaluation of training programmes for all nuclear power plant personnel using the systematic approach to training (SAT) methodology. The SAT methodology has since been adopted and used for the development and implementation of training programmes for all types of nuclear facility and activities in the nuclear industry. The IAEA Technical Working Group on Training and Qualification of Nuclear Power Plant Personnel recommended that an additional publication be prepared to provide further guidance concerning competency assessments used for measuring the knowledge, skills and attitudes of personnel as the result of training. This publication has been prepared in response to that recommendation. A critical component of SAT (as part of the implementation phase) is the assessment of whether personnel have achieved the standards identified in the training objectives. The nuclear industry spends a significant amount of resources conducting competency assessments. Competency assessments are used for employee selection, trainee assessment, qualification, requalification and authorization (in some Member States the terminology may be 'certification' or 'licensing'), and job advancement and promotion. Ineffective testing methods and procedures, or inappropriate interpretation of test results, can have significant effects on both human performance and nuclear safety. Test development requires unique skills and, as with any skill, training and experience are needed to develop and improve them. Test item and examination development, use, interpretation of results and examination refinement, like all other aspects of SAT, should be part of an ongoing, systematic process. This publication is primarily intended for use by personnel responsible for developing and administering

  5. Corrosion engineering in nuclear power industry

    International Nuclear Information System (INIS)

    Prazak, M.; Tlamsa, J.; Jirousova, D.; Silber, K.

    1990-01-01

    Corrosion problems in nuclear power industry are discussed from the point of view of anticorrosion measures, whose aim is not only increasing the lifetime of the equipment but, first of all, securing ecological safety. A brief description is given of causes of corrosion damage that occurred at Czechoslovak nuclear power plants and which could have been prevented. These involve the corrosion of large-volume radioactive waste tanks made of the CSN 17247 steel and of waste piping of an ion exchange station made of the same material, a crack in a steam generator collector, contamination of primary circuit water with iron, and corrosion of CrNi corrosion-resistant steel in a spent fuel store. It is concluded that if a sufficient insight into the corrosion relationships exists and a reasonable volume of data is available concerning the corrosion state during the nuclear facility performance, the required safety can be achieved without adopting extremely costly anticorrosion measures. (Z.M.)

  6. Localization and indigenization of China nuclear power industry

    International Nuclear Information System (INIS)

    Zhang Xingfa

    2009-01-01

    It points out that China needs to develop nuclear power to solve the shortage of energy source. Localization and independence is the key for the development of nuclear power industry. Localized and independent nuclear power possesses economical competitiveness. China has the condition and capability to realize localization and independence of nuclear power industry. Technology introduction, adaptation and assimilation can enhance the R and D capability of China's nuclear power industry, and speed up the process of localization and independence. (authors)

  7. The structure of the nuclear industry

    International Nuclear Information System (INIS)

    Leaist, G.T.; Morisette, E.F.

    1981-01-01

    Since 1952, when Canadians began to study the application of reactors to power generation, the CANDU reactor design and the manufacturing and and engineering capability supporting it have evolved into a world-class technology. At present, Atomic Energy of Canada Ltd. works directly with provincial electrical utilities in developing their power reactor requirements. It assumes responsibility for the detailed design of the nuclear steam supply system of stations, undertakes some procurement activities, and may represent the utilities in licensing applications. The detailed design and supply of components for the remainder of the nuclear steam plant, as well as for the secondary plant, are provided in Ontario by Ontario Hydro together with manufacturers, and in Quebec and New Brunswick by private firms. Canadian utilities have always assumed the project managment function themselves, but with export sales AECL has taken turnkey responsiblity for either the nuclear steam plant or the complete power station. AECL owns design specifications and other documentation, the use of which it can license, but manufacturing technology resides with Canadian industry. Canadian manufacturers have supported AECL design licensing initiatives overseas. The Canadian nuclear industry's major problem is the current lack of a vigorous domestic market combined with an uncertain international one

  8. Subcontracting in nuclear industry - legal aspects

    International Nuclear Information System (INIS)

    Leger, M.

    2012-01-01

    This article describes the legal framework of subcontracting in France. Subcontracting is considered as a normal mode of functioning for an enterprise: an enterprise contracts another enterprise to do what it can not do itself or does not want to do. According to the 1975 law, cascade subcontracting is allowed but subcontractors have to be accepted by the payer. In some cases the payer can share responsibility when the subcontracting enterprises do not comply to obligations like the payment of some taxes. The main subcontractor who is the one who contracted with the payer is the only one responsible for the right execution of the whole contract. In nuclear industry there are 2 exceptions to the freedom of subcontracting. The first one concerns radiation protection: in a nuclear facility the person in charge of radioprotection must be chosen among the staff. The second concerns the operations and activities that are considered important for radiation protection, it is forbidden to subcontract them. In some cases like maintenance in nuclear sector the law imposes some qualification certification for subcontracting enterprises. The end of the article challenges the common belief about subcontracting in nuclear industry. (A.C.)

  9. Situation of nuclear industry in Japan

    International Nuclear Information System (INIS)

    2004-03-01

    This document presents the situation of nuclear industry in Japan: cooperation with France in the domain of the fuel cycle (in particular the back-end) and of for the industrial R and D about fast reactors and nuclear safety; present day situation characterized by a series of incidents in the domain of nuclear safety and by an administrative reorganization of the research and safety organizations; power of local representatives, results of April 2003 elections, liberalization of the electric power sector, impact of the TEPCO affair (falsification of safety reports) on the nuclear credibility, re-start up of the Monju reactor delayed by judicial procedures, stopping of the program of MOX fuel loading in Tepco's reactors, discovery of weld defects in the newly built Rokkasho-mura reprocessing plant, an ambitious program of reactors construction, the opportunity of Russian weapons dismantling for the re-launching of sodium-cooled fast reactors; the competition between France and Japan for the setting up of ITER reactor and its impact of the French/Japanese partnership. (J.S.)

  10. Industrial aspects of nuclear energy: French experience

    International Nuclear Information System (INIS)

    Lebreton, G.

    1986-11-01

    France decides to develop nuclear energy on a wide scale about 12 years ago. To cope with this ambitious program, the roles have been distributed within a very cohesive organization, as follows: EDF, the french national electricity utility is owner, prime contractor, and plant operator. The Atomic Energy Commission, CEA performs part of the research and development work, and supplies the necessary technical support to the safety authorities. A few leading industrial firms design and build the major parts of the nuclear power plants. Among them is Framatome, which is responsible for the design, manufacture, erection, and startup of nuclear steam supply systems (the NSSSs), and related auxiliaries. Alsthom is responsible for the supply of the turbine and its auxiliaries. It would not be proper to describe the French nuclear industry without focussing our attention on the care given to transfer of technology. Technology transfer agreements can take several forms, but local factors have to be taken into account. These forms are discussed in this paper. A typical and highly significant example (KNU 9-10 project) is given

  11. The industrial nuclear fuel cycle in Argentina

    International Nuclear Information System (INIS)

    Koll, J.H.; Kittl, J.E.; Parera, C.A.; Coppa, R.C.; Aguirre, E.J.

    1977-01-01

    The nuclear power program of Argentina for the period 1976-85 is described, as a basis to indicate fuel requirements and the consequent implementation of a national fuel cycle industry. Fuel cycle activities in Argentina were initiated as soon as 1951-2 in the prospection and mining activities through the country. Following this step, yellow-cake production was initiated in plants of limited capacity. National production of uranium concentrate has met requirements up to the present time, and will continue to do so until the Sierra Pintada Industrial Complex starts operation in 1979. Presently, there is a gap in local production of uranium dioxide and fuel elements for the Atucha power station, which are produced abroad using Argentine uranium concentrate. With its background, the argentine program for the installation of nuclear fuel cycle industries is described, and the techno-economical implications considered. Individual projects are reviewed, as well as the present and planned infrastructure needed to support the industrial effort [es

  12. Nuclear power program information and data. UPDATE, March--April 1979

    International Nuclear Information System (INIS)

    1979-01-01

    UPDATE is published every two months by the Division of Nuclear Power Development to provide a quick reference source on the current status of nuclear power plant construction and operation in the United States, and for information on the economics, fuel requirements and performance of nuclear generating units. Similar information is included on other means of electric generation as they relate to nuclear power

  13. UPDATE: Nuclear Power Program information and data, July-August 1979

    International Nuclear Information System (INIS)

    1979-01-01

    UPDATE is published every two months by the Division of Nuclear Power Development to provide a quick reference source on the current status of nuclear power plant construction and operation in the United States, and for information on the economics, fuel requirements and performance of nuclear generating units. Similar information is included on other means of electric generation as they relate to nuclear power

  14. Nuclear industry - challenges in chemical engineering

    International Nuclear Information System (INIS)

    Sen, S.; Sunder Rajan, N.S.; Balu, K.; Garg, R.K.; Murthy, L.G.K.; Ramani, M.P.S.; Rao, M.K.; Sadhukhan, H.K.; Venkat Raj, V.

    1978-01-01

    Chemical engineering processes and operations are closely involved in every step of the nuclear fuel cycle. Starting from mining and milling of the ore through the production of fuel and other materials and their use in nuclear reactors, fuel reprocessing, fissile material recycle and treatment and disposal of fission product wastes, each step presents a challenge to the chemical engineer to evolve and innovate processes and techniques for more efficient utilization of the energy in the atom. The requirement of high recovery of the desired components at high purity levels is in itself a challenge. ''Nuclear Grade'' specifications for materials put a requirement which very few industries can satisfy. Recovery of uranium and thorium from low grade ores, of heavy water from raw water, etc. are examples. Economical and large scale separation of isotopes particularly those of heavy elements is a task for which processess are under various stages of development. Further design of chemical plants such as fuel reprocessing plants and high level waste treatment plants, which are to be operated and maintained remotely due to the high levels of radio-activity call for engineering skills which are being continually evolved. In the reactor, analysis of the fluid mechanics and optimum design of heat removal system are other examples where a chemical engineer can play a useful role. In addition to the above, the activities in the nuclear industry cover a very wide range of chemical engineering applications, such as desalination and other energy intensive processes, radioisotope and radiation applications in industry, medicine and agriculture. (auth.)

  15. Nuclear instrumentation for the industrial measuring systems

    International Nuclear Information System (INIS)

    Normand, S.

    2010-01-01

    This work deals with nuclear instrumentation and its application to industry, power plant fuel reprocessing plant and finally with homeland security. The first part concerns the reactor instrumentation, in-core and ex-core measurement system. Ionization Uranium fission chamber will be introduced with their acquisition system especially Campbell mode system. Some progress have been done on regarding sensors failure foresee. The second part of this work deals with reprocessing plant and associated instrumentation for nuclear waste management. Proportional counters techniques will be discussed, especially Helium-3 counter, and new development on electronic concept for reprocessing nuclear waste plant (one electronic for multipurpose acquisition system). For nuclear safety and security for human and homeland will be introduce. First we will explain a new particular approach on operational dosimetric measurement and secondly, we will show new kind of organic scintillator material and associated electronics. Signal treatment with real time treatment is embedded, in order to make neutron gamma discrimination possible even in solid organic scintillator. Finally, the conclusion will point out future, with most trends in research and development on nuclear instrumentation for next years. (author) [fr

  16. Mobile robotics application in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Jones, S.L.; White, J.R. [REMOTEC, Inc., Oak Ridge, TN (United States)

    1995-03-01

    Mobile robots have been developed to perform hazardous operations in place of human workers. Applications include nuclear plant inspection/maintenance, decontamination and decommissioning police/military explosive ordinance disposal (EOD), hostage/terrorist negotiations and fire fighting. Nuclear facilities have proven that robotic applications can be cost-effective solutions to reducing personnel exposure and plant downtime. The first applications of mobile robots in the nuclear industry began in the early 1980`s, with the first vehicles being one of a kind machines or adaptations of commercial EOD robots. These activities included efforts by numerous commercial companies, the U.S. Nuclear Regulatory Commission, EPRI, and several national laboratories. Some of these efforts were driven by the recovery and cleanup activities at TMI which demonstrated the potential and need for a remote means of performing surveillance and maintenance tasks in nuclear plants. The use of these machines is now becoming commonplace in nuclear facilities throughout the world. The hardware maturity and the confidence of the users has progressed to the point where the applications of mobile robots is not longer considered a novelty. These machines are being used in applications where the result is to help achieve more aggressive goals for personnel radiation exposure and plant availability, perform tasks more efficiently, and allow plant operators to retrieve information from areas previously considered inaccessible. Typical examples include surveillance in high radiation areas (during operation and outage activities), radiation surveys, waste handling, and decontamination evolutions. This paper will discuss this evolution including specific applications experiences, examples of currently available technology, and the benefits derived from the use of mobile robotic vehicles in commercial nuclear power facilities.

  17. Mobile robotics application in the nuclear industry

    International Nuclear Information System (INIS)

    Jones, S.L.; White, J.R.

    1995-01-01

    Mobile robots have been developed to perform hazardous operations in place of human workers. Applications include nuclear plant inspection/maintenance, decontamination and decommissioning police/military explosive ordinance disposal (EOD), hostage/terrorist negotiations and fire fighting. Nuclear facilities have proven that robotic applications can be cost-effective solutions to reducing personnel exposure and plant downtime. The first applications of mobile robots in the nuclear industry began in the early 1980's, with the first vehicles being one of a kind machines or adaptations of commercial EOD robots. These activities included efforts by numerous commercial companies, the U.S. Nuclear Regulatory Commission, EPRI, and several national laboratories. Some of these efforts were driven by the recovery and cleanup activities at TMI which demonstrated the potential and need for a remote means of performing surveillance and maintenance tasks in nuclear plants. The use of these machines is now becoming commonplace in nuclear facilities throughout the world. The hardware maturity and the confidence of the users has progressed to the point where the applications of mobile robots is not longer considered a novelty. These machines are being used in applications where the result is to help achieve more aggressive goals for personnel radiation exposure and plant availability, perform tasks more efficiently, and allow plant operators to retrieve information from areas previously considered inaccessible. Typical examples include surveillance in high radiation areas (during operation and outage activities), radiation surveys, waste handling, and decontamination evolutions. This paper will discuss this evolution including specific applications experiences, examples of currently available technology, and the benefits derived from the use of mobile robotic vehicles in commercial nuclear power facilities

  18. Update to nuclear data standards for nuclear measurements. Summary report of a consultants` meeting

    Energy Technology Data Exchange (ETDEWEB)

    Wienke, H. [ed.; International Atomic Energy Agency, Vienna (Austria). Nuclear Data Section; Carlson, A. D. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Chiba, S. [Japan Atomic Energy Research Inst., Tokai (Japan); Hambsch, F. J. [Institute for Reference Materials and Measurements, Geel (Belgium); Olsson, N. [Department of Neutron Research, Uppsala Univ., Uppsala (Sweden); Smirnov, A. N. [V.G. Khlopin Radium Inst., St. Petersburg (Russian Federation)

    1997-05-01

    This document is an update of the 1991 NEANDC/INDC Nuclear Standards File (INDC(SEC)-101) to indicate the status and extension of cross section standards for the {sup 10}B(n,{alpha}) reaction in the energy region below 20 Mev; and the H(n,n), {sup 235}U9(n,f), {sup 238}U(n,f), and {sup 209}Bi(n,f) reactions for selected energy regions above 20 Mev. Refs, figs, tabs.

  19. Update to nuclear data standards for nuclear measurements. Summary report of a consultants' meeting

    International Nuclear Information System (INIS)

    Wienke, H.; Chiba, S.; Hambsch, F.J.; Olsson, N.; Smirnov, A.N.

    1997-05-01

    This document is an update of the 1991 NEANDC/INDC Nuclear Standards File (INDC(SEC)-101) to indicate the status and extension of cross section standards for the 10 B(n,α) reaction in the energy region below 20 Mev; and the H(n,n), 235 U9(n,f), 238 U(n,f), and 209 Bi(n,f) reactions for selected energy regions above 20 Mev. Refs, figs, tabs

  20. The changing structure of the electric power industry: An update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The U. S. electric power industry today is on the road to restructuring a road heretofore uncharted. While parallels can be drawn from similar journeys taken by the airline industry, the telecommunications industry, and, most recently, the natural gas industry, the electric power industry has its own unique set of critical issues that must be resolved along the way. The transition will be from a structure based on a vertically integrated and regulated monopoly to one equipped to function successfully in a competitive market. The long-standing traditional structure of the electric power industry is the result of a complex web of events that have been unfolding for over 100 years. Some of these events had far-reaching and widely publicized effects. Other major events took the form of legislation. Still other events had effects that are less obvious in comparison (e.g., the appearance of technologies such as transformers and steam and gas turbines, the invention of home appliances, the man-made fission of uranium), and it is likely that their significance in the history of the industry has been obscured by the passage of time. Nevertheless, they, too, hold a place in the underpinnings of today`s electric industry structure. The purpose of this report, which is intended for both lay and technical readers, is twofold. First, it is a basic reference document that provides a comprehensive delineation of the electric power industry and its traditional structure, which has been based upon its monopoly status. Second, it describes the industry`s transition to a competitive environment by providing a descriptive analysis of the factors that have contributed to the interest in a competitive market, proposed legislative and regulatory actions, and the steps being taken by the various components of the industry to meet the challenges of adapting to and prevailing in a competitive environment.

  1. The changing structure of the electric power industry: An update

    International Nuclear Information System (INIS)

    1996-12-01

    The U. S. electric power industry today is on the road to restructuring a road heretofore uncharted. While parallels can be drawn from similar journeys taken by the airline industry, the telecommunications industry, and, most recently, the natural gas industry, the electric power industry has its own unique set of critical issues that must be resolved along the way. The transition will be from a structure based on a vertically integrated and regulated monopoly to one equipped to function successfully in a competitive market. The long-standing traditional structure of the electric power industry is the result of a complex web of events that have been unfolding for over 100 years. Some of these events had far-reaching and widely publicized effects. Other major events took the form of legislation. Still other events had effects that are less obvious in comparison (e.g., the appearance of technologies such as transformers and steam and gas turbines, the invention of home appliances, the man-made fission of uranium), and it is likely that their significance in the history of the industry has been obscured by the passage of time. Nevertheless, they, too, hold a place in the underpinnings of today's electric industry structure. The purpose of this report, which is intended for both lay and technical readers, is twofold. First, it is a basic reference document that provides a comprehensive delineation of the electric power industry and its traditional structure, which has been based upon its monopoly status. Second, it describes the industry's transition to a competitive environment by providing a descriptive analysis of the factors that have contributed to the interest in a competitive market, proposed legislative and regulatory actions, and the steps being taken by the various components of the industry to meet the challenges of adapting to and prevailing in a competitive environment

  2. Update on the Pharmaceutical Industry | McDonald | Southern ...

    African Journals Online (AJOL)

    ... Times published a supplement on the pharmaceutical industry on 30 November 2003. This has been an extremely dynamic environment and one that will be affected by impending legislative change. The objective of the survey was to provide some insight into the current status of the industry – special attention was paid ...

  3. Update on the Pharmaceutical Industry | McDonald | Southern ...

    African Journals Online (AJOL)

    The Sunday Times Business Times published a supplement on the pharmaceutical industry on 30 November 2003. This has been an extremely dynamic environment and one that will be affected by impending legislative change. The objective of the survey was to provide some insight into the current status of the industry ...

  4. Education for the nuclear power industry: Swedish perspective

    International Nuclear Information System (INIS)

    Blomgren, J.

    2005-01-01

    In the Swedish nuclear power industry staff, very few newly employed have a deep education in reactor technology. To remedy this, a joint education company, Nuclear Training and Safety Center (KSU), has been formed. To ensure that nuclear competence will be available also in a long-term perspective, the Swedish nuclear power industry and the Swedish Nuclear Power Inspectorate (SKI) have formed a joint center for support of universities, the Swedish Nuclear Technology Center (SKC). The activities of these organisations, their links to universities, and their impact on the competence development for the nuclear power industry will be outlined. (author)

  5. Commercial basis to nuclear industry skills

    International Nuclear Information System (INIS)

    King, Mike

    1989-01-01

    The United Kingdom Atomic Energy Authority (UKAEA) has considerable experience in measurement and control systems which it has designed for nuclear reactor use. It is now using this experience to help other industries needing to monitor variables such as flow, level, position, conductivity, thickness, temperature, density, sound, vibrations, light, movement, pressure, strain and radiation. Recently British Nuclear Fuels sought UKAEA's help to solve a process measurement problem at the Sellafield encapsulation plant which is used to recycle unspent fuel and immobilise liquid wastes using a cementation process. The level and specific gravity of the liquid waste slurry must be accurately measured before the correct amount of solidifying material can be added. The solution to this problem, using pneumacator technology, is described. (author)

  6. Industrial fans used in nuclear facilities

    International Nuclear Information System (INIS)

    Carlson, J.A.

    1987-01-01

    Industrial fans are widely used in nuclear facilities, and their most common use is in building ventilation. To control the spread of contamination, airflows are maintained at high levels. Therefore, the selection of the fan and fan control are important to the safety of people, equipment and the environment. As a result, 80% of all energy used in nuclear facilities is fan energy. Safety evolves from the durability, control and redundancy in the system. In new or retrofit installations, testing and qualification of fans and systems are completed prior to start-up. Less important but necessary is the energy conservation aspect of fan selection and installations. Fan efficiency, type of control and system installation are evaluated for energy use

  7. Nuclear challenges in Asia, an industrial perception

    International Nuclear Information System (INIS)

    Tiffou, Jean-Pierre

    2015-01-01

    The author first gives a brief overview of military programmes implemented by India, China, Pakistan and North Korea to develop and manufacture the various vectors of nuclear weapons (submarines, missiles, bombers), the objective being (not always reached) to possess a nuclear triad (intercontinental ground-based missiles, submarines, and bombers). In this respect, the author briefly comments the evolutions of defence budgets, discusses the evolutions of the Chinese defence industry since the end of World War II (strong relationship with USSR, emergence of other various trade relationships, a more independent production but with a search for new technological partnerships). The author then discusses whether China is a threatening military power, more particularly for some Asian countries like Japan and South Korea

  8. Nuclear energy for technology and industry

    International Nuclear Information System (INIS)

    Kemeny, L.G.

    1987-01-01

    It is a sad commentary on the complete lack of informed realism of the Government and people of Australia that, after thirty years of vacillation and political chicanery, nuclear technology, one of this nation's potential ''sunrise industries'' is in its death throes. Whilst our third world neighbours, in particular Indonesia, Malaysia, the Philippines, the People's Republic of China and even impoverished Bangladesh are making giant strides to develop an autonomous expertise Australia's potential has been dissipated and its opportunities for leadership and technology transfer lost. By chance this paper was written some weeks before the nuclear accident at Chernobyl (U.S.S.R.) and many years after accidents at the Three Mile Island nuclear power plant (U.S.A.) and the plutonium production reactor at Windscale (U.K.). None of these incidents alter the basic arguments or conclusions contained in this manuscript. (See Appendix). The year 1986 might represent the final opportunity for concerned professionals to seek to improve the quality of public education and information to end ''the war against the atom''. It will be necessary to re-motivate the public and private sector of a demoralised technology and to launch it on a road of responsible and successful expansion unshackled by beaurocratic interference. It is the purpose of this paper to examine why the first three decades of nuclear technology in Australia have been so singularly unsuccessful and to discuss a coherent and rational implementation of plans and policies for the future. (author)

  9. Design of nuclear instruments for industrial use

    International Nuclear Information System (INIS)

    Maggio, G.E.

    1988-01-01

    Following an introduction to the atomic structure and the radioactive desintegration, the applications of radioisotopic sealed sources are described. The laws that govern the interaction of radiation with matter and the statistics applied to the radioactive measurements are presented. Different measurement techniques, basic equations of design, the way to provide the activity calculation of a source and the detector's characteristics are given, according to the parameters to be measured and the conditions imposed. Finally, the principles of operation and the most important characteristics of different nuclear instruments to be used in industrial measurements are described. (Author) [es

  10. Government intervention in the Canadian nuclear industry

    International Nuclear Information System (INIS)

    Doern, G.B.

    1980-01-01

    Several facets of government intervention in the Canadian nuclear industry are examined by reviewing the general historical evolution of intervention since the Second World War and by a more detailed analysis of three case studies. The case studies are the public sector - private sector content of the initial CANDU reactor program in the 1950's, the regulation of the health and safety of uranium miners in the late 1960's and early 1970's, and the Ontario Hydro decision in 1978 to enter into longer-term (40 year) contracts for uranium for its power reactors. (auth)

  11. Government intervention in the Canadian nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Doern, G B [Carleton Univ., Ottawa, Ontario (Canada). School of Public Administration

    1980-01-01

    Several facets of government intervention in the Canadian nuclear industry are examined by reviewing the general historical evolution of intervention since the Second World War and by a more detailed analysis of three case studies. The case studies are the public sector - private sector content of the initial CANDU reactor program in the 1950's, the regulation of the health and safety of uranium miners in the late 1960's and early 1970's, and the Ontario Hydro decision in 1978 to enter into longer-term (40 year) contracts for uranium for its power reactors.

  12. Nuclear analytical techniques in Cuban Sugar Industry

    International Nuclear Information System (INIS)

    Diaz Riso, O.; Griffith Martinez, J.

    1996-01-01

    This paper is a review concerning the applications of Nuclear Analytical Techniques in the Cuban sugar industry. The most complete elemental composition of final molasses (34 elements ) and natural zeolites (38) this last one employed as an auxiliary agent in sugar technological processes has been performed by means of Instrumental Neutron Activation Analysis (INAA) and X-Ray Fluorescence Analysis (XRFA). The trace elements sugar cane soil plant relationship and elemental composition of different types of Cuban sugar (rawr, blanco directo and refine) were also studied. As a result, valuable information referred to the possibilities of using these products in animal and human foodstuff so as in other applications are given

  13. Fibre optic cable in the nuclear industry

    International Nuclear Information System (INIS)

    Roberts, Berwyn

    1987-01-01

    The uses of optical fibre cables to transmit light signals include medical applications and telecommunications. In the nuclear industry the applications include process control and monitoring, conventional datacoms, security fencing and sensors. Time division multiplexing is described and currently available fibre optic multipexers are listed and explained. Single and multimode fibres are mentioned. Fibre optics are also used in cryogenics, to monitor the integrity of the storage vessels for cryogenic liquids. The uses of fibre optics at Hartlepool, Heysham I and Torness are mentioned in particular. (UK)

  14. Economical state of nuclear industries in 1980

    International Nuclear Information System (INIS)

    1982-01-01

    The Japan Atomic Industrial Forum, Inc., has carried out the survey of the actual state of atomic energy industries in Japan every year, and the 22nd survey was performed on the state in 1980. In this survey, the atomic energy industries are classified into electric power business, mining and manufacture, and trading companies. The actual results of expenditures, sales, the investment in facilities, backlogs, the volume of business, the number of employees and so on were surveyed by questionnaire, respectively. The data show the history of the atomic energy industries for a quarter of a century, and are utilized to search for the problems. The period of survey was from April 1, 1980, to March 31, 1981. The number of enterprises surveyed was 1234, and 924 companies replied, accordingly, the ratio of reply was 75%. 546 enterprises among the 924 had some results related to atomic energy, therefore, the results of survey were classified, totalized, examined and analyzed, based on the survey papers of these 546 enterprises. As for the Japanese economy, the real growth of economy was 3.8%, the index of mining and manufacturing production increased by 4.6%, but total energy consumption decreased by 4.4%, as compared with the previous year. One nuclear power plant began the operation, and 4000 centrifuges are operated in the uranium enrichment pilot plant. The trends of expenditures, sales and employees are shown. (Kako, I.)

  15. Update on the status of life extension in U.S. Nuclear Power Plants

    International Nuclear Information System (INIS)

    Hevia Ruperez, F.; Lehnert, D.F.; Gregor, F.E.

    1997-01-01

    The purpose of this paper is to provide an update on the status of key activities that may affect the plant life extension option for U.S. nuclear power plants and to explain how the progress on the regulatory and technical developments may affect the world-wide nuclear industry. Establishing a predictable and stable regulatory process is the final piece that is needed by U.S. utilities to confidently consider the plant life extension option in their strategic planning. Certain technical issues were also identified in the previous studies where additional investigation would benedict the U.S. nuclear power industry's understanding of an aging effect and/or capability to demonstrate that the aging effect can be effectively managed. It is concluded that the lessons learned from the U.S. industry activities and the associated interactions with the NRC are leading to a positive indication that U.S. utilities believe the differences between the NRC and industry on the implementation of the amended license renewal rule can be successfully resolved and the that many utilities generally are interested in pursuing the life extension option as part of their strategic planning. The methodology and guidance developed in the U.S. for performing integrated plant assessments and evaluating time-limited aging analyses will be of significant interest to utilities and regulators in other countries. They will undoubtedly lay the foundation for an acceptable approach for demonstrating that aging processes are being processes are being effectively managed by plant programs and that safety margins or bases will be maintained during an extended operating period. (Author)

  16. Problems of nuclear industry in Japan

    International Nuclear Information System (INIS)

    Yoshiyama, Hirokichi

    1976-01-01

    The past twenty years growth of Japanese reactor plant makers is historically reviewed in the first part of this report. The first ten years were devoted for the construction of research reactors and for the design studies of power plants. The next ten years were devoted for the construction of power stations. Total income and expenditures of Japanese makers for these two periods are presented. It is emphasized that expenditures always exceeded income. The second part previews the projected growth of nuclear power generation. Generating capacities of 49,000 MW at 1985 and 90,000 MW at 1990 is assumed. To meet this demand, Japanese makers must have the ability of supplying about 8000 MW per year and the number of personnel (at present, about 9,000) must be increased to 25,000 in next ten years. The third part discusses the roles of plant makers. Establishment of safe and reliable technology, promotion of standardization, improvement of economical bases, and the promotion of associated industries (such as nuclear fuel makers and operator training institutions) are the main subjects. The roles of government are also shortly discussed. The rest of this paper shortly discusses about the participation to the national project (ATR, FBR, and centrifuge enrichment) and about future problems in growing to an exporting industry. (Aoki, K.)

  17. Instructional skills evaluation in nuclear industry training

    International Nuclear Information System (INIS)

    Mazour, T.J.; Ball, F.M.

    1985-11-01

    This report provides information to nuclear power plant training managers and their staffs concerning the job performance requirements of instructional personnel to implement prformance-based training programs (also referred to as the Systems Approach Training). The information presented in this report is a compilation of information and lessons learned in the nuclear power industry and in other industries using performance-based training programs. The job performance requirements in this report are presented as instructional skills objectives. The process used to develop the instructional skills objectives is described. Each objective includes an Instructional Skills Statement describing the behavior that is expected and an Instructional Skills Standard describing the skills/knowledge that the individual should possess in order to have achieved mastery. The instructional skills objectives are organized according to the essential elements of the Systems Approach to Training and are cross-referenced to three categories of instructional personnel: developers of instruction, instructors, and instructional managers/supervisors. Use of the instructional skills objectives is demonstrated for reviewing instructional staff training and qualification programs, developing criterion-tests, and reviewing the performance and work products of individual staff members. 22 refs

  18. JAERI FEL applications in nuclear energy industries

    International Nuclear Information System (INIS)

    Minehara, Eisuke J.

    2005-01-01

    The JAERI FEL has first discovered the new FEL lasing of 255fs ultra fast pulse, 6-9% high efficiency, 1GW high peak power, a few kilowatts average power, and wide tunability of medium and far infrared wavelength regions at the same time. Using the new lasing and energy-recovery linac technology, we could extend a more powerful and more efficient free-electron laser (FEL) than 10kW and 25%, respectively, for nuclear energy industries, and others. In order to realize such a tunable, highly-efficient, high average power, high peak power and ultra-short pulse FEL, we need the efficient and powerful FEL driven by the JAERI compact, stand alone and zero boil-off super-conducting RF linac with an energy-recovery geometry. Our discussions on the FEL will cover the application of non-thermal peeling, cutting, and drilling to prevent cold-worked stress-corrosion cracking failures in nuclear energy and other heavy industries. (author)

  19. Coating technologies in the nuclear industry

    International Nuclear Information System (INIS)

    Kaae, J.L.

    1993-01-01

    Metallic, ceramic, and organic coatings are so commonly used in modern industry that virtually everyone can name several applications in which coatings are employed. Thus, it is no surprise that coating technologies are widely employed in the nuclear industry. Some of these technologies utilize processes that are mature and well developed, and others utilize processes that are new and state of the art. In this paper, five generic coating processes that include almost all vapor deposition processes are described, and then applications of each of these processes for deposition of specific materials in nuclear applications are described. These latter selections, of course, are very subjective, and others will be able to name other applications. Because of their wide range of application, coating technologies are considered to be national critical technologies. The generic coating processes that cover almost all vapor deposition technologies are as follows: (1) stationary substrate chemical vapor deposition; (2) fluidized bed chemical vapor deposition; (3) plasma-assisted chemical deposition; (4) sputtering; (5) evaporation

  20. Learning curve estimation techniques for nuclear industry

    International Nuclear Information System (INIS)

    Vaurio, Jussi K.

    1983-01-01

    Statistical techniques are developed to estimate the progress made by the nuclear industry in learning to prevent accidents. Learning curves are derived for accident occurrence rates based on actuarial data, predictions are made for the future, and compact analytical equations are obtained for the statistical accuracies of the estimates. Both maximum likelihood estimation and the method of moments are applied to obtain parameters for the learning models, and results are compared to each other and to earlier graphical and analytical results. An effective statistical test is also derived to assess the significance of trends. The models used associate learning directly to accidents, to the number of plants and to the cumulative number of operating years. Using as a data base nine core damage accidents in electricity-producing plants, it is estimated that the probability of a plant to have a serious flaw has decreased from 0.1 to 0.01 during the developmental phase of the nuclear industry. At the same time the frequency of accidents has decreased from 0.04 per reactor year to 0.0004 per reactor year

  1. High nitrogen stainless steels for nuclear industry

    International Nuclear Information System (INIS)

    Kamachi Mudali, U.

    2016-01-01

    Nitrogen alloying in stainless steels (SS) has myriad beneficial effects, including solid solution strengthening, precipitation effects, phase control and corrosion resistance. Recent years have seen a rapid development of these alloys with improved properties owing to advances in processing technologies. Furthermore, unlimited demands for high-performance advanced steels for special use in advanced applications renewed the interest in high nitrogen steels (HNS). The combination of numbers of attractive properties such as strength, fracture toughness, wear resistance, workability, magnetic properties and corrosion resistance of HNS has given a unique advantage and offers a number of prospective applications in different industries. Based on extensive studies carried out at IGCAR, nitrogen alloyed type 304LN SS and 316LN SS have been chosen as materials of construction for many engineering components of fast breeder reactor (FBR) and associated reprocessing plants. HNS austenitic SS alloys are used as structural/reactor components, i.e., main vessel, inner vessel, control plug, intermediate heat exchanger and main sodium piping for fast breeder reactor. HNS type 304LN SS is a candidate material for continuous dissolver, nuclear waste storage tanks, pipings, etc. for nitric acid service under highly corrosive conditions. Recent developments towards the manufacturing and properties of HNS alloys for application in nuclear industry are highlighted in the presentation. (author)

  2. Environmental issues and the nuclear industry

    International Nuclear Information System (INIS)

    Castle, P.

    1995-01-01

    Health safety and environmental liabilities of the 'nuclear industry' reflect those of industry in general and may broadly be divided into two areas: criminal liability for regulatory non-compliance; and civil liability for damage caused to persons and their property (for example, neighbours, employees etc). In addition, environmental liability may be incurred as a result of powers of the regulatory authorities to clean up contamination and to recoup the cost. These are in addition to the regime of strict liability imposed, where relevant, by the Nuclear Installations Act 1965. In the case of environmental liabilities, 'owners;, 'occupiers', 'persons responsible', 'persons in control' may all be held to be liable and for the most part these terms remain undefined both under English law and European Community (now European Union) law. This potentially has ramifications for current and former owners and operators, their boards and senior managers, other employees, parent companies, shareholders and their lenders and investors - of particular relevance in the context of privatization. (author)

  3. Future contracts in the nuclear fuel industry

    International Nuclear Information System (INIS)

    Fuller, D.M.

    1995-01-01

    In a modern futures market, standardized contracts for future delivery of a commodity are traded through an exchange that establishes contract terms and the rules of trading. The futures contract itself is simply an agreement between a buyer and a seller in which the seller is obligated to deliver and the buyer is obligated to accept a predetermined quantity of a specified commodity at a given location on a certain date in the future for a set price. Organized futures markets aid in price discovery; provide a risk management tool for those with commercial interests in a commodity; create speculative opportunities; and contribute to competitiveness, efficiency, and fairness in trading. There are, at present, no standardized futures contracts in the nuclear fuel industry, although the concept has been discovered for years. The idea has been raised again recently in relation to the disposition of Russian uranium. Some adaptation of traditional futures contracts, traded on an exchange composed of nuclear fuel industry participants, could provide many of the benefits found in other commodity futures markets

  4. Nuclear Regulator Knowledge Management in a Dynamic Nuclear Industry Environment

    International Nuclear Information System (INIS)

    Turner, J.

    2016-01-01

    Full text: The paper outlines the experiences to date in developing mature knowledge management within the UK’s nuclear regulatory body The Office for Nuclear Regulation (ONR). In 2010 concerns over the loss of knowledge due to the age profile within the organization instigated a review of knowledge management and the development of a knowledge management initiative. Initially activities focused on knowledge capture but in order to move to through life knowledge transfer, knowledge management was then aligned with organizational resilience initiatives. A review of progress highlighted the need to better engage the whole organization to achieve the desired level of maturity for knowledge management. Knowledge management activities now cover organizational culture and environment and all aspects of organizational resilience. Benefits to date include clear understanding of core knowledge requirements, better specifications for recruitment and training and the ability to deploy new regulatory approaches. During the period of implementing the knowledge management programme ONR undertook several organizational changes in moving to become a separate statutory body. The UK nuclear industry was in a period of increased activity including the planning of new nuclear reactors. This dynamic environment caused challenges for embedding knowledge management within ONR which are discussed in the paper. (author

  5. JAIF formulates policy for strengthening foundation of nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    With recognition that conditions surrounding the nuclear industry are becoming severe with the slowdown in the growth of the Japanese economy, the Japan Atomic Industrial Forum has been discussing ways and means of strengthening the foundations of the nuclear industry. A subcommittee of the Power Reactor Development Committee has been formed. It comprizes two divisions. The first division focused on economic and social prospects for the future and other basic questions. The second division dealt with specific problems viewed from the position of the nuclear quipment supply industry and measures to resolve them. The report was prepared based on the studies done by the two divisions, and focusing on the strengthening of the basis of the nuclear industry through the year 2010. The report estimates that construction of nuclear power plants will be less than 2 units a year in the coming five year period, and will continue at about 2 units a year until about the year 2000. From this outlook, it discusses the work facing the nuclear industry and the steps to be taken to reduce nuclear power generation costs, efficient research and development and the promotion of international cooperation. The report covers four sections: the position of nuclear power development in the national economy; the present state and tasks of the nuclear industry and the nuclear equipment supply industry; measures for maintaining and strengthening the foundations of the nuclear industry, and the tasks to be done. (Nogami, K.)

  6. A practicable signal processing algorithm for industrial nuclear instrument

    International Nuclear Information System (INIS)

    Tang Yaogeng; Gao Song; Yang Wujiao

    2006-01-01

    In order to reduce the statistical error and to improve dynamic performances of the industrial nuclear instrument, a practicable method of nuclear measurement signal processing is developed according to industrial nuclear measurement features. The algorithm designed is implemented with a single-chip microcomputer. The results of application in (radiation level gauge has proved the effectiveness of this method). (authors)

  7. Statistical handbook for Canada's upstream petroleum industry: '96 updates

    International Nuclear Information System (INIS)

    1997-01-01

    The Statistical Handbook of CAPP is an annual compilation of useful information about the Canadian petroleum and natural gas industry. It has been published since 1955, and is a key source of upstream petroleum statistics. It presents a historical summary of the petroleum industry''s progress and provides detailed statistical information on the production and consumption of petroleum, petroleum products, natural gas and natural gas liquids, imports and exports, land sales, pipelines, reserves, drilling and refinery activities, and prices in Canada. The information, mostly in tabular form, is based on the latest available data (generally up to and including 1996). For the first time in 1997, the Handbook is also made available in CD-ROM format (EXCEL 5.0). Plans are also underway to publish the Handbook on a secure site on the Internet

  8. UPDATE: nuclear power program information and data, July-September 1983

    International Nuclear Information System (INIS)

    1983-11-01

    UPDATE is published to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate

  9. 78 FR 71675 - Update of the Office of Nuclear Reactor Regulation's Electronic Operating Reactor Correspondence

    Science.gov (United States)

    2013-11-29

    ... NUCLEAR REGULATORY COMMISSION [NRC-2013-0260] Update of the Office of Nuclear Reactor Regulation's Electronic Operating Reactor Correspondence The U.S. Nuclear Regulatory Commission (NRC) is issuing this Federal Register notice to inform the public of a slight change in the manner of distribution of publicly available operating reactor licensing...

  10. Analysis on Japanese nuclear industrial technologies and their military implications

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H S; Yang, M H; Kim, H J. and others

    2000-10-01

    This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months.

  11. Analysis on Japanese nuclear industrial technologies and their military implications

    International Nuclear Information System (INIS)

    Kim, H. S.; Yang, M. H.; Kim, H. J. and others

    2000-10-01

    This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months

  12. Analysis on Japanese nuclear industrial technologies and their military implications

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. S.; Yang, M. H.; Kim, H. J. and others

    2000-10-01

    This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months.

  13. Nuclear industrial and power complex of Kazakhstan

    International Nuclear Information System (INIS)

    Shemanskiy, V.A.; Cherepnin, Yu.S.; Zelenski, D.I.; Papafanasopulo, G.A.

    1997-01-01

    While selecting the national power supply strategy of economic potential development four factors are laid in the basis of discussions and technical and economic decisions: effect either power complexes on people health, consequences environmental, economics and resources existence. Atomic power requires the balanced approach to power politics which, by that, avoids the dependence on any energy source. The existing electric power generation structure in Kazakhstan is Featured by the following numbers: -TEPP on coal - 79%; - TEPP on gas-black-oil fuel - 12-13%; - HEPP - 6-7%; - Atomic PP - about 0.7%. The ground for nuclear power development is considerable uranium deposits and rather developed atomic industry. Kazakhstan atomic industry includes: - uranium extractive enterprise - State Holding Company 'Tselinnyi Mining-Chemical Plant' (SHC 'TCMP'), Stepnoy Ore Division (SOD), Central ore Division 6 (COD 6), KASKOR (Aktau); - plant on fuel pellets production for APP (JSC 'UMP'); - plants on production of rare and rare-earth metals - Irtysh Chemical and Metallurgical (JSC 'CMP') and Ulba Metallurgical Plant (JSC 'UMP'); - Mangyshlak Power Plant (MAEK); - Scientific Complex of NNC RK of Ministry of Science-Academy of Science. About 25% of world deposits and uranium resources are concentrated in Kazakhstan bowels. The scientific potential of atomic production complex of the Republic of Kazakhstan is concentrated in NNC RK divisions (IAE and INP) and at JSC 'UMP' and MAEK enterprises. Ministry Energy and Nature Resources is a Board responsible for the development of atomic industry and power branches. Atomic Energy Agency of the Republic Kazakhstan performs the independent effective state supervision and control providing safety of atomic industry power installations operation

  14. Dialogue between the nuclear industry and environmentalists is the key

    International Nuclear Information System (INIS)

    Padley, P.J.

    1987-01-01

    'Nuclear energy - the good news for British Industry' was the title of a meeting organised by the Confederation of British Industry in July 1987. This article summarizes the contributions of each of the speakers. Between them they produced figures on the importance of the nuclear industry in various countries including the USA, France and the United Kingdom. The risks were mentioned, also the public fears following the accident at Chernobyl. The UK policy on the disposal of nuclear waste is summarized. The disposal is not technically difficult, only politically so because of adverse public opinion. These points also emerged; the nuclear industry must liaise with environmentalists and the UK manufacturing industry needs low cost energy which the nuclear industry could supply. However, the long-term development of nuclear power is only possible if there are no more reactor accidents leading to injury by radioactivity. (U.K.)

  15. SFC/SFBMN guidelines update for nuclear cardiology procedures: stress testing in adults and children

    International Nuclear Information System (INIS)

    Manrique, A.; Marie, P.Y.; Maunoury, Ch.; Acar, Ph.; Agostini, D.

    2002-01-01

    The guidelines update for nuclear cardiology procedures are studied in this article. We find the minimum technique conditions for the stress testing practice, the recommendations for the different ischemia activation tests, the choice of the stress test. (N.C.)

  16. Japanese steel mills update and expectations to Canadian coal industry

    International Nuclear Information System (INIS)

    Yamaguchi, I.

    2008-01-01

    Kobe Steel's (Kobelco) corporate strategy includes expanding from only-one product such as high tensile strength steel sheet, and enlarging overseas production capacity through joint ventures and technical alliances. A new steel making process from low quality iron ore and steaming coal called ITmk3 has been developed by Kobe Steel that does not require any coke, reduces carbon dioxide emissions by 20 per cent, and reduces the cost of transporting slag. This strategy and technology was presented along with the changes surrounding the Japanese steel industry and raw materials market. These changes include the rise of emerging oil-producing countries; world steel production and exports; the rise in prices of resources; and the slowdown of the United States economy. The current situation of Japanese crude steel production, pig-iron production, and coke expansion plans were also presented. The presentation also outlined expectation's of the Canadian coal industry with reference to Canadian coal imports to Japan. tabs., figs

  17. Europairs project: creating an alliance of nuclear and non-nuclear industries for developing nuclear cogeneration

    International Nuclear Information System (INIS)

    Hittner, Dominique; Bogusch, Edgar; Viala, Celine; Angulo, Carmen; Chauvet, Vincent; Fuetterer, Michael A.; De Groot, Sander; Von Lensa, Werner; Ruer, Jacques; Griffay, Gerard; Baaten, Anton

    2010-01-01

    Developers of High Temperature Reactors (HTR) worldwide acknowledge that the main asset for market breakthrough is its unique ability to address growing needs for industrial cogeneration of heat and power (CHP) owing to its high operating temperature and flexibility, adapted power level, modularity and robust safety features. HTR are thus well suited to most of the non-electric applications of nuclear energy, which represent about 80% of total energy consumption. This opens opportunities for reducing CO 2 emissions and securing energy supply which are complementary to those provided by systems dedicated to electricity generation. A strong alliance between nuclear and process heat user industries is a necessity for developing a nuclear system for the conventional process heat market, much in the same way as the electronuclear development required a close partnership with utilities. Initiating such an alliance is one of the objectives of the EUROPAIRS project just started in the frame of the EURATOM 7. Framework Programme (FP7) under AREVA coordination. Within EUROPAIRS, process heat user industries express their requirements whereas nuclear industry will provide the performance window of HTR. Starting from this shared information, an alliance will be forged by assessing the feasibility and impact of nuclear CHP from technical, industrial, economical, licensing and sustainability perspectives. This assessment work will allow pointing out the main issues and challenges for coupling an HTR with industrial process heat applications. On this basis, a Road-map will be elaborated for achieving an industrially relevant demonstration of such a coupling. This Road-map will not only take into consideration the necessary nuclear developments, but also the required adaptations of industrial application processes and the possible development of heat transport technologies from the nuclear heat source to application processes. Although only a small and short project (21 months

  18. The World Nuclear Industry Status Report 2016

    International Nuclear Information System (INIS)

    Schneider, Mycle; Froggatt, Antony; Hazemann, Julie; Katsuta, Tadahiro; Ramana, M.V.; Fairlie, Ian; Maltini, Fulcieri; Thomas, Steve; Kaaberger, Tomas

    2016-07-01

    The World Nuclear Industry Status Report 2015 provides a comprehensive overview of nuclear power plant data, including information on operation, production and construction. The WNISR assesses the status of new-build programs in current nuclear countries as well as in potential newcomer countries. Nuclear power generation in the world increased by 1.3%, entirely due to a 31% increase in China. Ten reactors started up in 2015-more than in any other year since 1990-of which eight were in China. Construction on all of them started prior to the Fukushima disaster. Eight construction starts in the world in 2015-to which China contributed six-down from 15 in 2010 of which 10 were in China. No construction starts in the world in the first half of 2016. The number of units under construction is declining for the third year in a row, from 67 reactors at the end of 2013 to 58 by mid-2016, of which 21 are in China. China spent over US$100 billion on renewables in 2015, while investment decisions for six nuclear reactors amounted to US$18 billion. Eight early closure decisions taken in Japan, Sweden, Switzerland, Taiwan and the U.S. Nuclear phase-out announcements in the U.S. (California) and Taiwan. In nine of the 14 building countries all projects are delayed, mostly by several years. Six projects have been listed for over a decade, of which three for over 30 years. China is no exception here, at least 10 of 21 units under construction are delayed. With the exception of United Arab Emirates and Belarus, all potential newcomer countries delayed construction decisions. Chile suspended and Indonesia abandoned nuclear plans. AREVA has accumulated US$11 billion in losses over the past five years. French government decides euro 5.6 billion bailout and breaks up the company. Share value 95 percent below 2007 peak value. State utility EDF struggles with US$ 41.5 billion debt, downgraded by S and P. Chinese utility CGN, EDF partner for Hinkley Point C, loses 60% of its share value

  19. Energy policy and nuclear power. Expectations of the power industry

    International Nuclear Information System (INIS)

    Harig, H.D.

    1995-01-01

    In the opinion of the power industry, using nuclear power in Germany is a responsible attitude, while opting out of nuclear power is not. Electricity utilities will build new nuclear power plants only if the structural economic and ecological advantages of nuclear power are preserved and can be exploited in Germany. The power industry will assume responsibility for new complex, capital-intensive nuclear plants only if a broad societal consensus about this policy can be reached in this country. The power industry expects that the present squandering of nuclear power resources in Germany will be stopped. The power industry is prepared to contribute to finding a speedy consensus in energy policy, which would leave open all decisions which must not be taken today, and which would not constrain the freedom of decision of coming generations. The electricity utilities remain committed proponents of nuclear power. However, what they sell to their customers is electricity, not nuclear power. (orig.) [de

  20. The development of Chinese power industry and its nuclear power

    International Nuclear Information System (INIS)

    Zhou Dabin

    2002-01-01

    The achievements and disparity of Chinese power industry development is introduced. The position and function of nuclear power in Chinese power industry is described. Nuclear power will play a role in ensuring the reliable and safe supply of primary energy in a long-term and economic way. The development prospects of power source construction in Chinese power industry is presented. Challenge and opportunity in developing nuclear power in China are discussed

  1. Environmental impact of the nuclear industry in China

    International Nuclear Information System (INIS)

    Pan Ziqiang; Wang Zhibo; Chen Zhuzhou; Zhang Yongxing; Xie Jianlun

    1996-01-01

    Since its foundation in 1955, the nuclear industry has become a comprehensive industrial, scientific and technical system in China. The nuclear industry has obviously brought great profit to the country, but how much environmental effect it has caused is a question of common interest which we should answer. This report shows the environmental assessment of the nuclear fuel cycle in China. (author). 4 refs, 1 fig., 22 tabs

  2. Quantification practices in the nuclear industry

    International Nuclear Information System (INIS)

    1986-01-01

    In this chapter the quantification of risk practices adopted by the nuclear industries in Germany, Britain and France are examined as representative of the practices adopted throughout Europe. From this examination a number of conclusions are drawn about the common features of the practices adopted. In making this survey, the views expressed in the report of the Task Force on Safety Goals/Objectives appointed by the Commission of the European Communities, are taken into account. For each country considered, the legal requirements for presentation of quantified risk assessment as part of the licensing procedure are examined, and the way in which the requirements have been developed for practical application are then examined. (author)

  3. Nuclear analytical techniques in Cuban sugar industry

    International Nuclear Information System (INIS)

    Diaz R, O.; Griffith M, J.

    1997-01-01

    This paper is a review concerning the application of Nuclear Analytical Techniques in the Cuban sugar industry. The most complete elemental composition of final molasses (34 elements) and natural zeolites (38) this last one employed as an auxiliary agent in sugar technological processe4s has been performed by means of instrumental Neutron Activation Analysis (INAA) and X-Ray Fluorescence Analysis (XRFA). The trace elemental sugar cane soill-plant relationship and elemental composition of different types of Cuban sugar (raw, blanco-directo and refine) were also studied. As a result, valuable information referred to the possibilities of using these products in animal and human foodstuff so as in the other applications are given. (author). 34 refs., 6 figs., 1 tab

  4. Nuclear energy in a low carbon future: updating the IEA/NEA nuclear technology road-map

    International Nuclear Information System (INIS)

    Paillere, H.; Cameron, R.; ); Tam, C.; )

    2014-01-01

    The Nuclear Technology road-map is one of 20 technology road-maps which the International Energy Agency (IEA) has published. The 2010 road-map, produced jointly by the IEA and the OECD Nuclear Energy Agency (NEA), came out in a year which saw 16 new construction starts, a number that had not been reached since 1985. The IEA's Energy Technology Perspectives (ETP) 'Blue Map' scenario, also published in 2010, projected at that time that the installed world nuclear capacity would need to reach 1200 GW (gross) by 2050 as part of a global effort to de-carbonise the electricity sector assuming least cost optimisation. The 'nuclear renaissance' then stalled for a number of reasons which include the consequences of the accident at the Fukushima Daiichi nuclear power plant in March 2011 on public acceptance and energy policies. The economic crisis that was already looming in 2010, as well as delays and cost overruns in the first Generation III new build projects in Europe also played a role in the significant drop in new projects. Finally, the US shale gas revolution and the potential role that unconventional oil and gas could play have also changed the prospects for nuclear development in many countries. Four years after the publication of the first road-map, the IEA and the NEA are updating the nuclear energy road-map, taking into account the recent challenges facing the development of this technology. The presentation of this paper will explain the process followed to update the road-map, through stakeholder engagement workshops that took place between January and April 2014. It will most importantly provide some insight into its contents and preliminary milestones and recommendations. The draft of the road-map will be peer-reviewed over the summer and will be published at the end of 2014. The vision developed in the road-map still relates to the contribution that nuclear energy can make to the de-carbonisation of the power system, described in

  5. Industrial development - consequences about the implantation of Brazilian Nuclear Program

    International Nuclear Information System (INIS)

    Syllus, C.

    1987-07-01

    The strategy to promote the growing industry participation in the Brazilian Nuclear Program, the difficulties, the measurements adopted for overcoming and the results obtained in terms of industrial development, are presented. (M.C.K.) [pt

  6. Germany, an industrialized country, and nuclear power

    International Nuclear Information System (INIS)

    Wartenberg, L. v.

    2001-01-01

    The question of the future of nuclear power in Germany, and the agreement between the federal government and industry of June 14, 2000 about the future operation of plants, are important far beyond the confines of this sector of industry. In times of economic globalization and of competition among national economies, questions of location have become key issues in meeting future challenges. For this purpose, there must be more freedom for the economy; entrepreneurial action must be regarded as a positive duty to be fulfilled by society. Personal responsibility and competition, with room for self-responsibility, must not be hampered further by interventions and red tape. This applies to all sectors of the economy, in particular to the power supply sector, as is borne out by the current debate about the quota regulations for cogeneration systems (CHP). Social justice, one of the most important unifying forces in this modern society, must be interpreted as solidarity. This solidarity must be sought also in an international context. Supplying the basic necessities to all inhabitants of this earth requires all sources of energy, also in the interest of achieving sustainability. This term should be interpreted, above and beyond its meaning in environmental protection, as a concept in all areas of politics, implying that the future must be taken into account in all decisions made today. In the light of the problems associated with establishing a worldwide sustainable power supply system, inter alia meeting the objectives of climate protection, continuity of supply, and economic viability, there is no way around nuclear power. Free decisions are required in the sense of sustainable economic management, and the political boundary conditions must be created for this to be possible. (orig.) [de

  7. Updated tool for nuclear criticality accident emergency response

    International Nuclear Information System (INIS)

    Broadhead, B.L.; Hopper, C.M.

    1995-01-01

    Some 20 yr ago a hand-held slide rule was developed at the Oak Ridge Y-12 Plant to aid in the response to several postulated nuclear criticality accidents. These assumed accidents involved highly enriched uranium in either a bare metal or a uranyl nitrate system. The slide rule consisted of a sliding scale based on the total fission yield and four corresponding dose indicators: (1) a prompt radiation dose relationship as a function of distance; (2) a delayed fission product gamma dose rate relationship as a function of time and distance; (3) the total dose relationship with time and distance; and (4) the I-min integrated dose relationship with time and distance. The original slide rule was generated assuming very simplistic numerical procedures such as the inverse-square relationship of dose with distance and the Way-Wigner relationship to express the time dependence of the dose. The simple prescriptions were tied to actual dose measurements from similar systems to yield a meaningful, yet simple approach to emergency planning and response needs. This paper describes the application of an advanced procedure to the updating of the original slide rule for five critical systems. These five systems include (a) an unreflected sphere of 93.2 wt% enriched uranium metal, (b) an unreflected sphere of 93.2 wt% enriched uranyl nitrate solution with a H/ 235 U ratio of 500, (c) an unreflected sphere of damp 93.2 wt% enriched uranium oxide with a H/ 235 U ratio of 10, (d) an unreflected sphere of 4.95 wt% enriched uranyl fluoride solution having a H/ 235 U ratio of 410, and (e) an unreflected sphere of damp 5 wt% enriched uranium dioxide having a H/ 235 U ratio of 200

  8. The nuclear power industry: financial considerations

    International Nuclear Information System (INIS)

    Leward, S.J.

    1984-01-01

    It is important not to allow the present liquidity crisis to escalate into economic and political dislocations that could result in a prolonged cessation of necessary capital investment. In assessing the future growth of nuclear power in other parts of the world, it may be instructive to consider the plight of the U.S. industry and the parallels that are apparent. In the United States, electric utility debt is growing too fast; a structural imbalance has developed even on the better corporate balance sheets; and cash flow or internal generation has diminished, particularly as the time needed to complete nuclear plants has extended, thereby precluding revenue production for as long as 10 to 15 years from the beginning of construction. Newcomers to the lending business may have little appetite to lend in unfavorable climates, and regulatory (political) bodies may irresponsibly allow unproductive use of resources and refuse to adopt difficult but essential economic policies to preserve the financial integrity of the borrower. These issues are relevant in the examination of any lender/borrower relationship, whether it be between sovereign nations, banker and borrower, or vendor and vendee. (author)

  9. Bacterial laccase: recent update on production, properties and industrial applications.

    Science.gov (United States)

    Chauhan, Prakram Singh; Goradia, Bindi; Saxena, Arunika

    2017-10-01

    Laccases (benzenediol: oxygen oxidoreductase, EC 1.10.3.2) are multi-copper enzymes which catalyze the oxidation of a wide range of phenolic and non-phenolic aromatic compounds in the presence or absence of a mediator. Till date, laccases have mostly been isolated from fungi and plants, whereas laccase from bacteria has not been well studied. Bacterial laccases have several unique properties that are not characteristics of fungal laccases such as stability at high temperature and high pH. Bacteria produce these enzymes either extracellularly or intracellularly and their activity is in a wide range of temperature and pH. It has application in pulp biobleaching, bioremediation, textile dye decolorization, pollutant degradation, biosensors, etc. Hence, comprehensive information including sources, production conditions, characterization, cloning and biotechnological applications is needed for the effective understanding and application of these enzymes at the industrial level. The present review provides exhaustive information of bacterial laccases reported till date.

  10. The nuclear industry and the NPT: a perspective from Washington

    International Nuclear Information System (INIS)

    Porter, D.J.

    1987-01-01

    Whilst exporting nuclear reactors, the nuclear industry in the United States and other nuclear exporting countries also supports the Non-Proliferation Treaty. The nuclear industry needs the IAEA safeguards and the NPT as these allow the nuclear trade to be conducted in an orderly fashion. Non-sensitive equipment, materials and technology can be made available to other nations which adhere to the NPT. Indeed article IV of the NPT encourages this. Many developing countries do not, however, have the money to pay for the imported technology. This article looks at the current situation in the world where nuclear technology has been, is being, or will be, transferred. (U.K.)

  11. Organization, structure, and performance in the US nuclear power industry

    International Nuclear Information System (INIS)

    Lester, R.K.

    1986-01-01

    Several propositions are advanced concerning the effects of industry organization and structure on the economic performance of the American commercial nuclear power industry. Both the electric utility industry and the nuclear power plant supply industry are relatively high degree of horizontal disaggregation. The latter is also characterized by an absence of vertical integration. The impact of each of these factors on construction and operating performance is discussed. Evidence is presented suggesting that the combination of horizontal and vertical disaggregation in the industry has had a significant adverse effect on economic performance. The relationship between industrial structure and regulatory behavior is also discussed. 43 references, 4 figures, 9 tables

  12. Canadian fuel cell commercialization roadmap update : progress of Canada's hydrogen and fuel cell industry

    International Nuclear Information System (INIS)

    Filbee, S.; Karlsson, T.

    2009-01-01

    Hydrogen and fuel cells are considered an essential part of future low-carbon energy systems for transportation and stationary power. In recognition of this, Industry Canada has worked in partnership with public and private stakeholders to provide an update to the 2003 Canadian Fuel Cell Commercialization Roadmap to determine infrastructure requirements for near-term markets. The update includes technology and market developments in terms of cost and performance. This presentation included an overview of global hydrogen and fuel cell markets as background and context for the activities of the Canadian industry. Approaches toward commercial viability and mass market success were also discussed along with possible scenarios and processes by which these mass markets could develop. Hydrogen and fuel cell industry priorities were outlined along with recommendations for building a hydrogen infrastructure

  13. Industry based performance indicators for nuclear power plants

    International Nuclear Information System (INIS)

    Connelly, E.M.; Van Hemel, S.B.; Haas, P.M.

    1990-07-01

    This report presents the results of the first phase of a two-phase study, performed with the goal of developing indirect (leading) indicators of nuclear power plant safety, using other industries as a model. It was hypothesized that other industries with similar public safety concerns could serve as analogs to the nuclear power industry. Many process industries have many more years of operating experience, and many more plants than the nuclear power industry, and thus should have accumulated much useful safety data. In Phase 1, the investigators screened a variety of potential industry analogs and chose the chemical/petrochemical manufacturing industry as the primary analog for further study. Information was gathered on safety programs and indicators in the chemical industry, as well as in the nuclear power industry. Frameworks were selected for the development of indicators which could be transferred from the chemical to the nuclear power environment, and candidate sets of direct and indirect safety indicators were developed. Estimates were made of the availability and quality of data in the chemical industry, and plans were developed for further investigating and testing these candidate indicators against safety data in both the chemical and nuclear power industries in Phase 2. 38 refs., 4 figs., 7 tabs

  14. Nuclear industry will be short of engineers

    International Nuclear Information System (INIS)

    Yates, M.

    1990-01-01

    This article discusses the potential shortage of nuclear engineers due to reduction of educational and training facilities and difficulty in attracting minorities into nuclear engineering. The article reports on recommendations from the National Research Council Nuclear Education Study Committee on attracting minorities to nuclear engineering, increasing DOE fellowships, funding for research and development, involvement of utilities and vendors, and support of the American Nuclear Society's advocacy of nuclear engineering education

  15. Vapor explosion studies for nuclear and non-nuclear industries

    Energy Technology Data Exchange (ETDEWEB)

    Taleyarkhan, Rusi P. [Arden L. Bement, Jr. Professor Nuclear Engineering, School of Nuclear Engineering, 1290 Nuclear Engineering Building, Room 108C, Purdue University, West Lafayette, IN 47905 (United States)]. E-mail: rusi@purdue.edu

    2005-05-01

    Energetic melt-water explosions are a well-established contributor to risk for nuclear reactors, and even more so for the metal casting industry. In-depth studies were undertaken in an industry-national laboratory collaborative effort to understand the root causes of explosion triggering and to evaluate methods for prevention. The steam explosion triggering studies (SETS) facility was devised and implemented for deriving key insights into explosion prevention. Data obtained indicated that onset of base surface-entrapment induced explosive boiling-caused trigger shocks is a result of complex combination of surface wettability, type of coating (organic versus inorganic), degree of coating wearoff, existence of bypass pathways for pressure relief, charring and non-condensable gas (NCG) release potential. Of these parameters NCGs were found to play a preeminent role on explosion prevention by stabilizing the melt-water steam interface and acting as a shock absorber. The role of NCGs was experimentally confirmed using SETS for their effect on stable film boiling using a downward facing heated body through which gases were injected. The presence of NCGs in the steam film layer caused a significant delay in the transitioning of film-to-nucleate boiling. The role of NCGs on explosion prevention was thereafter demonstrated more directly by introducing molten metal drops into water pools with and without NCG bubbling. Whereas spontaneous and energetic explosions took place without NCG injection, only benign quenching occurred in the presence of NCGs. Gravimetric analyses of organic coatings which are known to prevent explosion onset were also found to release significant NCGs during thermal attack by melt in the presence of water. These findings offer a novel, simple, cost-effective technique for deriving fundamental insights into melt-water explosions as well as for explosion prevention under most conditions of interest to metal casting, and possibly for nuclear reactor

  16. A new context for the nuclear research and industry

    International Nuclear Information System (INIS)

    2000-01-01

    Pascal Colombani, general administrator of the CEA, develops in this presentation the situation of the nuclear industry to introduce the new orientations of the CEA group. The energy context, the deregulation impacts, the energy dependence and the greenhouse effect project are discussed before the presentation of the research programs and the necessary reorganizing of the nuclear industry. (A.L.B.)

  17. Considerations about the licensing process of special nuclear industrial facilities

    Energy Technology Data Exchange (ETDEWEB)

    Talarico, M.A., E-mail: talaricomarco@hotmail.com [Marinha do Brasil, Rio de Janeiro, RJ (Brazil). Coordenacao do Porgrama de Submarino com Propulsao Nuclear; Melo, P.F. Frutuoso e [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2015-07-01

    This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

  18. Considerations about the licensing process of special nuclear industrial facilities

    International Nuclear Information System (INIS)

    Talarico, M.A.; Melo, P.F. Frutuoso e

    2015-01-01

    This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

  19. 77 FR 15142 - Updated Nuclear Regulatory Commission Fiscal Years 2008-2013 Strategic Plan

    Science.gov (United States)

    2012-03-14

    ... 2008-2013 Strategic Plan AGENCY: Nuclear Regulatory Commission. ACTION: Strategic plan. SUMMARY: The U...-1614, Volume 5, ``U.S. Nuclear Regulatory Commission, Fiscal Years [FY] 2008-2013 Strategic Plan,'' dated February 2012. The updated FY 2008-2013 strategic plan describes the agency's mission and...

  20. Health and safety record of the nuclear industry

    International Nuclear Information System (INIS)

    Carter, M.W.; Carruthers, E.; Button, J.C.E.

    1975-09-01

    This paper examines the claim of the nuclear industry to have an excellent safety record, in terms of health and accident records of workers in the industry. It does not consider accidents which have not resulted in harm to the workers' health. The nuclear industry is considered to include all work with ionising radiations and radioactive materials, in education, research, medicine and industry. Since 'safety' is not an absolute concept, comparisons are made with the published records of other industries, and a study is made of the performance of the nuclear industry in relation to its own safety criteria. Data are presented on the radiation exposure of nuclear workers in Europe, America, India and Australia, in relation to the internationally recommended limits, and there is some discussion of the risks involved in these limits. The death rate in parts of the nuclear industry in America, the United Kingdom, and Australia is presented and compared with the death rate for other industries in those countries, and a listing is made of deaths caused by radiation in the period 1945 to 1968. Injury rates for the US and Australian nuclear industries are also compared with the injury rates for other industries in these countries. Consideration is given to the safety record of individual components of the nuclear industry (using the wide definition of this industry given above), special attention being given to health records of uranium miners, plutonium workers and radiologists. Although there are difficulties in obtaining sufficiently detailed information of this kind it is considered that the data presented, relative to any reasonable standard, demonstrate that the nuclear industry has a safety record to be proud of. (author)

  1. Business environment of nuclear power industry in Korea

    International Nuclear Information System (INIS)

    Lee, Yoon Young

    2003-01-01

    In Korea, there are total of 18 Nuclear Power Plants in operation as of the end of 2002 and 6 more plants are under construction. The first project for the Advanced Power Reactor (APR) 1400 nuclear power plant is being launched to provide reliable electricity economical competitiveness in Korea. The competitive business environment both globally and in Korea, where the power industry is undergoing significant restructuring, is requiring the Korean nuclear industry to continually improve the economic associated with nuclear power. Introduction of the APR 1400 design and continued improvement of local capabilities are two of the ways that the industry is responding to the challenge. (author)

  2. Status of Korean nuclear industry and Romania-Korea cooperation in nuclear field

    International Nuclear Information System (INIS)

    Myung-Key, Lee

    2005-01-01

    Current status of electric power in Korea is characterized by the end of August 2004 by a total installed capacity of about 62,000 MW while the total electricity generation is about 342,000 GWh. The installed capacity of nuclear power is 17,716 MW, sharing 29% of total installed capacity and presenting 38% of total electricity generation in Korea. In accordance with the provisions of the Long Term Energy Plan during the past 40 years, the installed capacity in Korea has been drastically increased. In the 1960's, major sources of electricity generation were locally-mined anthracite coal and hydro, but in the 1970's it was the imported oil. However, through diversification policy the dependence of the imported oil has been rapidly reduced and the share of coal , gas and nuclear generation has been steadily increased. According to the long-term power development plan updated last year, which is extended to 2017, the installed capacity in the year 2017 will be about 88,000 MW. At that time nuclear power will become the largest, sharing 30% and the shares of coal and gas fired power will be steadily decreased. Concerning the Nuclear Power Projects, there are four different nuclear power sites along the coast of Korean peninsula, Yonggwang, Kori, Wolsong and Ulchin. In addition to the currently operating 20 nuclear power plants, there are 6 more nuclear power plants under construction at Shin-Wolsong and Shin-Kori sites. Our efforts to enhance the technology, economy and safety of the nuclear power plants will be continuously pursued. Wolsong unclear power units 1, 2, 3 and 4 are CANDU type reactors which are same type as Romanian Cernavoda nuclear power plants. Operational performance, in terms of capacity factor of NPPs, has remained well above the world average and recorded 91.4% last year. Also, last year, the frequency of unplanned trip was 0.6 time per reactor. In 2004, ten NPPs achieved OCTF, which stands for One Cycle Trouble Free in 2004. Wolsong unit 1

  3. Development and issues of nuclear industry in Taiwan

    International Nuclear Information System (INIS)

    Kuangchi Liu

    1994-01-01

    Industrial and economic developments in Taiwan have achieved a so-called 'miracle' in the last decades. Endeavors by the private enterprise, prudent planning by the government, and the devoted efforts by the diligent and creative labor forces have been credited jointly with the result. To develop a sustainable nuclear industry in support of an efficient and safe power generation and other applications of nuclear energy in Taiwan, continuing efforts from the private industry, government and each individual of the nuclear industry will be required. In this paper, milestones of the past and major issues for future developments will be discussed

  4. Radiation safety in nuclear industry in retrospect and perspective

    International Nuclear Information System (INIS)

    Pan Ziqiang

    1993-01-01

    More than 30 years have passed since the starting up of nuclear industry in China from the early 1950's. Over the past 30-odd years, nuclear industry has always kept a good record in China thanks to the policy of 'quality first, safety first' clearly put forward for nuclear industry from the outset and a lot of suitable effective measures taken over that period. Internationally, there is rapid progress in radiation protection and nuclear safety (hereafter refereed to as radiation safety) and a number of new concepts in the field of radiation protection have been advanced. Nuclear industry is developing based on the international standardization. To ensure the further development of nuclear utility, radiation safety needs to be further strengthened

  5. Human performance in the nuclear industry

    International Nuclear Information System (INIS)

    Koncz, Steven M.

    2015-01-01

    Management of employees human performance in the Nuclear Industry is endemic to their safety when working. In the United Kingdom it has been a key focus since 2003. Employees were made aware through a detailed program of workshops, of the error prevention methods and how to apply them. The use of effective incident barriers became embedded in the safety culture. The methodology implemented was personal ownership, to enable self assessment of behaviors, attitudes and beliefs. When put in place, there are many specific barriers, which can reduce the chances of an error occurring. They come under the headings of organisational, procedural and physical barriers. All of these were used in some way and continue to be reinforced on a daily basis. Specific barriers are applied in specific situations. However, some general ones are also effective. In common use are the Take 2 or Take 5 Minutes, point of work risk assessments. Applying the human performance barrier Independent Verification (I.V.) would result in 'Take 3 and I.V.' This would independently double check the risk assessment. New ways of thinking are required to continuously improve and evolve. Results of the error reduction process included; reduced workload, increased plant reliability, efficiencies and productivity. (author)

  6. Human performance in the nuclear industry

    International Nuclear Information System (INIS)

    Koncz, S.M.

    2015-01-01

    Management of employees human performance in the Nuclear Industry is endemic to their safety when working. In the United Kingdom it has been a key focus since 2003. Employees were made aware through a detailed program of workshops, of the error prevention methods and how to apply them. The use of effective incident barriers became embedded in the safety culture. The methodology implemented was personal ownership, to enable self assessment of behaviors, attitudes and beliefs. When put in place, there are many specific barriers, which can reduce the chances of an error occurring. They come under the headings of organisational, procedural and physical barriers. All of these were used in some way and continue to be reinforced on a daily basis. Specific barriers are applied in specific situations. However, some general ones are also effective. In common use are the Take 2 or Take 5 Minutes, point of work risk assessments. Applying the human performance barrier Independent Verification (I.V.) would result in 'Take 3 and I.V.' This would independently double check the risk assessment. New ways of thinking are required to continuously improve and evolve. Results of the error reduction process included; reduced workload, increased plant reliability, efficiencies and productivity. (author)

  7. Instilling professionalism in the nuclear industry

    International Nuclear Information System (INIS)

    Widen, W.C.; Keeley, W.A.

    1990-01-01

    The American nuclear industry has implemented many technical changes in the past TMI decade. Equipment and facilities have been improved, procedures have been rewritten and refined, and operational personnel have bolstered their technical expertise. This paper reports that to place an increased focus upon professional -- the attitude, demeanor, and conscientiousness with which everyone conduct their jobs --- Westinghouse implemented the Conduct of Operations training program at the Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP). The program began by involving plant operations personnel in an intensive one-day training session using case studies to emphasize that it is people who determine the safety and effectiveness of our work environment. The case studies made it apparent that the human element is the factor common in all of these incidents. And, in these cases, when people became too removed from and/or complacent to automation, tragedy resulted. Finally, several organizations were explored in which a positive work culture and ethic is imbued so deeply and completely within the work force that it would be unthinkable to oppose the culture. Also, during the seminar session, work groups compiled their goals and values for good conduct of operations. In particular, each work group listed its standards for good conduct of operations as well as those factors necessary in the working environment to achieve their standard

  8. Radioactive waste: the poisoned legacy of the nuclear industry

    International Nuclear Information System (INIS)

    Rousselet, Y.

    2011-01-01

    The nuclear industry produces a huge amount of radioactive waste from one end to the other of the nuclear cycle: i.e. from mining uranium to uranium enrichment through reactor operating, waste reprocessing and dismantling nuclear power plants. Nuclear power is now being 'sold' to political leaders and citizens as an effective way to deal with climate change and ensure security of energy supplies. Nonetheless, nuclear energy is not a viable solution and is thus a major obstacle to the development of clean energy for the future. In addition to safety and security issues, the nuclear industry is, above all, faced with the huge problem of how to deal with the waste it produces and for which it has no solution. This ought to put a brake on the nuclear industry, but instead, against all expectations, its development continues to gather pace. (author)

  9. Industrial Hazardous Waste Management In Egypt-the baseline study: An Updated review

    International Nuclear Information System (INIS)

    Farida M, S.

    1999-01-01

    Increased industrialization over the past decades in Egypt has resulted in an increased and uncontrolled generation of industrial hazardous waste. This was not accompanied by any concerted efforts to control these wastes. Consequently, no system for handling or disposing of industrial wastes, in general, and industrial hazardous wastes, in specific, exists. In 1993, a baseline report was formulated to assess the overall problem of industrial hazardous waste management in Egypt. Consequently, recommendations for priority actions were identified and the main components of a national hazardous waste system under the provision of Law 4/ 1994 were presented. This paper provides an updated review of this report in light of the proposed technical, legal and institutional guidelines to help in the realization of such a needed waste management system in Egypt

  10. The information of the nuclear industry before and during the nuclear debate

    International Nuclear Information System (INIS)

    Borgstroem, P.

    1978-10-01

    A review of the organization and resources for information and public relations, which the nuclear industry have at its disposal in Sweden as well as in other countries. Furthermore, pre-nuclear organizations in the Northern Countries, which are not financed by the nuclear industry are discussed. (E.R.)

  11. Decision making in the digital age: the nuclear industry response

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, G. [Energy Group, Kepner-Tregoe, Inc. (Canada)

    2002-07-01

    Ten years ago, the consequences of a prolonged outage - or of choosing a costly alternative - could usually be recovered from the ratepayers without major difficulty. But today, as in the rest of industrial America, poorly crafted decisions have very real economic consequences. This paper discusses the decision making process within the nuclear industry in the age of industry deregulation.

  12. Decision making in the digital age: the nuclear industry response

    International Nuclear Information System (INIS)

    Edelman, G.

    2002-01-01

    Ten years ago, the consequences of a prolonged outage - or of choosing a costly alternative - could usually be recovered from the ratepayers without major difficulty. But today, as in the rest of industrial America, poorly crafted decisions have very real economic consequences. This paper discusses the decision making process within the nuclear industry in the age of industry deregulation

  13. Ecknomic benefits arising from the Canadian nuclear industry

    International Nuclear Information System (INIS)

    1982-03-01

    This document is a collection of surveys of the Canadian nuclear industry, with forecasts covering a number of possible scenarios. Topics covered include uranium mining and processing; economic benefits arising from the design, manufacture and construction of CANDU generating stations; employment and economic activity in the Canadian nqclear industry; and an overview of the remainder of the industry

  14. Usage of industrial robots in nuclear power industry

    International Nuclear Information System (INIS)

    Matsuo, Yoshio; Hamada, Kenjiro

    1982-01-01

    Japan is now at the top level in the world in robot technology.Its application to nuclear power field is one of the most expected. However, their usage spreads over various types of nuclear power plants, their manufacture and operation, and other areas such as fuel reprocessing plants and reactor plant decommissioning. The robots as used for the operation of BWR nuclear power plants, already developed and under development, are described: features in the nuclear-power usage of robots, the robots used currently for automatic fuel exchange, the replacement of control rod drives and in-service inspection; the robots under development for travelling inspection device and the inspection of main steam-relief safety valves, future development of robots. By robot usage, necessary personnel, work period and radiation exposure can be greatly reduced, and safety and reliability are also raised. (Mori, K.)

  15. Environmental effects from the nuclear industry

    International Nuclear Information System (INIS)

    1975-01-01

    Since 1969 several meetings have been convened to study the possibility of using high-level radiation in waste treatment. It was agreed that ionizing radiation offered some compromise as a feasible technology for a certain unique purpose, but economic considerations mitigated any overwhelming enthusiasm for early industrial realization. Recently a significant change has taken place in the world energy supply picture, and the expanded projection of nuclear power generation affects the analysis of comparative economic feasibility of ionizing radiation treatment of wastes. In addition, increased consideration of environmental quality not only calls for the re-evaluation of conventional waste treatment technologies, but also the development of more effective means where conventional methods might be unsatisfactory. As a result of several allied considerations, it was thought necessary and timely to review the status of research and development in the application of ionizing radiation to waste treatment and to consider the environmental implication of the proposed technology. Accordingly, the Symposium on the Use of High-Level Radiation in Waste Treatment - Status and Prospects was convened by the IAEA, in co-operation with the Government of the Federal Republic of Germany and the Bayerische Landesanstalt fur Bodenkultur und Pflanzenbau. Forty-eight papers were presented in eight sessions covering the current technology of waste-water treatment and re-use, radiosensitivity of micro-organisms, disinfection and microbiological control, physical and chemical modification of aqueous pollutants, technological and economic considerations, pilot-plant design and operating experiences, and radiation treatment of gaseous and solid wastes

  16. Status of the civilian nuclear industry in Asia

    International Nuclear Information System (INIS)

    Heim, Alexandre; Laconde, Thibault

    2011-01-01

    The main nuclear actors in Asia are China, South Korea, India and Japan. The authors indicate the share of nuclear energy in their energy mix, the number of operating reactors, the total installed power, and the number of projects. Then, for each of these four countries, and for Pakistan and Taiwan, they propose a brief history of the nuclear program and briefly present its current status. They also evoke the official reactions after the Fukushima accident. Finally, they briefly discuss some issues for the development of civilian nuclear industry in Asia: uranium supplies, nuclear waste processing, development of a national nuclear sector

  17. Standards development for the nuclear industry

    International Nuclear Information System (INIS)

    Domondon, D.B.

    The ushering of nuclear era in the Philippines with the construction of the PNPP-I (Philippine Nuclear Power Plant) necessitates the evolvement and use of nuclear standards as a tool for safety evaluation in the licensing process. The Department of Nuclear Regulation and Safeguards under the Philippine Atomic Energy Commission has as one of its responsibilities the establishment of regulatory standards to ensure safe operation of nuclear facilities. This article points out the needs for nuclear standards and the steps in standard development which involve an enormous amount of resources in terms of manpower, expertise and money. The staff of the Department of Nuclear Regulations and Safeguards (DNRS) does not intend to engage in the original development of standards; rather, it reviews standards in use elsewhere, specifically in the U.S. and adopts to local conditions. (author)

  18. Deeline and Fail: The ailing nuclear power industry

    International Nuclear Information System (INIS)

    Stoler, P.

    1985-01-01

    Peter Stoler, a Time correspondent, believes that if the government had regulated the nuclear power industry more strictly instead of being so friendly to it, the industry would be better off today. But Stoler thinks the dying industry can and should be saved. Better management, learning from foreign experience plus more governmental concern with safety are the main prescriptions. Most of the book contains a detailed history of the industry

  19. Potential industrial market for process heat from nuclear reactors

    International Nuclear Information System (INIS)

    Barnes, R.W.

    1976-07-01

    A specific segment of industrial process heat use has been examined in detail to identify individual plant locations throughout the United states where nuclear generated steam may be a viable alternative. Five major industries have been studied: paper, chemicals, petroleum, rubber, and primary metals. For these industries, representing 75 percent of the total industrial steam consumption, the individual plant locations within the U.S. using steam in large quantities have been located and characterized as to fuel requirements

  20. Integrated project management information systems: the French nuclear industry experience

    International Nuclear Information System (INIS)

    Jacquin, J.-C.; Caupin, G.-M.

    1990-01-01

    The article discusses the desirability of integrated project management systems within the French nuclear power industry. Change in demand for nuclear generation facilities over the last two decades has necessitated a change of policy concerning organization, cost and planning within the industry. Large corporate systems can benefit from integrating equipment and bulk materials tracking. Project management for the nuclear industry will, in future, need to incorporate computer aided design tools and project management information systems data bases as well as equipment and planning data. (UK)

  1. Integrated project management information systems: the French nuclear industry experience

    Energy Technology Data Exchange (ETDEWEB)

    Jacquin, J.-C.; Caupin, G.-M.

    1990-03-01

    The article discusses the desirability of integrated project management systems within the French nuclear power industry. Change in demand for nuclear generation facilities over the last two decades has necessitated a change of policy concerning organization, cost and planning within the industry. Large corporate systems can benefit from integrating equipment and bulk materials tracking. Project management for the nuclear industry will, in future, need to incorporate computer aided design tools and project management information systems data bases as well as equipment and planning data. (UK).

  2. Funding nuclear power research 1956 to 2015. Update

    International Nuclear Information System (INIS)

    Anon.

    2016-01-01

    In the debates about the use and the benefits of nuclear power plants the allegation is being made that nuclear power to this day had received public subsidies. That was the only reason why electricity from nuclear power plants was economically viable. That statement is wrong. A brief overview is given about the public funds for nuclear energy research and development. In relation to the electricity production less than 0.16 Euro Cents per kilowatt-hour have been spend by public funds for R and D.

  3. Optimalisation of national industry participation in nuclear power plant construction

    International Nuclear Information System (INIS)

    Sriyana

    2008-01-01

    A study of national industry participation based on recent data has already been conducted. The current industry data is used to estimate the optimum level of national industry participation in nuclear power plant (NPP) construction based on the prior study. The purpose of the study is to give a figure of the optimum level of national industry participation in NPP construction. The scope of the study is the NPP construction project in related to the potency of national industry to participate in the project. The methodology used in the study are literature study, web surfing for industrial data, and on-the-spot industry survey that are potential to participate in NPP construction. In addition to that, discussion with expertise of industrial practitioner was also conducted. The study concludes that (1) based on the recent national industry capability provided and compared to prior similar study, it is estimated that the level of national industry participation in the first NPP construction with the capacity of 1000 MWe PWR is about 40%. (2) to accelerate NPP technology transfer, we need to build a small size NPP. The nuclear island will be developed by BATAN in cooperation with national industry and the non-nuclear island will be developed by national industry. Universities and other academicians should be involved to support and keep the sustainability of man power availability in developing the NPP technology. (author)

  4. French nuclear industry exportations: companies and organisations, achievements and projects

    International Nuclear Information System (INIS)

    Faudon, V.; Pailler, S.; Miniere, D.; Pouget-Abadie, X.; Journes, F.; Ouali, F.; Brochard, D.; Choho, T.; Lagarde, D.; Anglaret, P.; Kottman, G.; Mockly, D.; Ouzounian, G.; Cordier, P.Y.; Prenez, J.C.; Arpino, J.M.; Jaouen, C.; Jolly, B.

    2013-01-01

    This document gathers a series of short articles in which the following players: French Nuclear Safety Authority (ASN), Electricity of France (EdF), French Alternative Energies and Atomic Energy Commission (CEA), AREVA, ALSTOM, the Association of French Nuclear Industry Exporters (AIFEN), the National Radioactive Waste Management Agency (ANDRA) and the French Society of Nuclear Energy (SFEN) present their competencies in their respective fields and their strategies and commercial offers for exports. 2 articles are dedicated to the achievements of the French nuclear industry in China and another details the cooperation between SFEN and its foreign counterparts. Another article briefly presents the EPR and ATMEA reactors. (A.C.)

  5. World nuclear power generation market and prospects of industry reorganization

    International Nuclear Information System (INIS)

    Murakami, Tomoko

    2007-01-01

    In late years there are many trends placing nuclear energy with important energy in various countries in the world due to a remarkable rise to an energy price, importance of energy security and a surge of recognition to a global environment problem. Overseas nuclear industry's acquisition by a Japanese nuclear power plant maker and its capital or business tie-up with an overseas company, were announced in succession in 2006. A nuclear power plant maker has played an extremely important role supporting wide technology in all stages of a design, construction, operation and maintenance in a nuclear power generation business. After having surveyed the recent trend of world nuclear power generation situation, a background and the summary of these acquisition/tie-ups made were investigated and analyzed to consider the influence that movement of such an industry gives a world nuclear power generation market. (T. Tanaka)

  6. Report of nuclear utility industry responses to Kemeny Commission recommendations

    International Nuclear Information System (INIS)

    1989-02-01

    The purpose of this paper is to provide a report of nuclear utility industry progress in responding to the recommendations of the President's Commission on the Accident at Three Mile Island (The Kemeny Commission). On April 11, 1979, in response to TMI, President Carter established a Commission to conduct '.... a comprehensive study and investigation of the recent accident involving the nuclear power facility on Three Mile Island in Pennsylvania'. The Commission was chaired by Dr. John G. Kemeny, then President of Dartmouth College. (A list of all members of The Kemeny Commission is provided in Attachment to the Appendix ). The report of the commission's findings and recommendations was transmitted to the President in October 1979. During this same period, the nuclear utility industry responded to TMI by creating the Institute of Nuclear Power Operations (INPO) with a mission to promote the highest levels of safety and reliability - to promote excellence - in the operation of nuclear electric generating plants. In addition, the Nuclear Safety Analysis Center (NSAC) was established at the Electric Power Research Institute (EPRI to evaluate the accident and assist in determining the best industry response. In a White House paper (and press release) of December 7 1979, the President announced that he agreed fully with the spirit and intent of al the Kemeny Commission recommendations and requested that the industry and The Nuclear Regulatory Commission (NRC) comply with the recommendations. The President also recognized the industry initiative in establishing INPO and called for several actions involving the Institute; the President directed the Department of Energy and other government agencies to provide assistance to INPO and the industry. An overall status of the nuclear utility industry responses to Kemeny Commission recommendations in the key areas directly related to nuclear plant operations is provided below. A more detailed status of industry responses to the

  7. Report of nuclear utility industry responses to Kemeny Commission recommendations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-02-15

    The purpose of this paper is to provide a report of nuclear utility industry progress in responding to the recommendations of the President's Commission on the Accident at Three Mile Island (The Kemeny Commission). On April 11, 1979, in response to TMI, President Carter established a Commission to conduct '.... a comprehensive study and investigation of the recent accident involving the nuclear power facility on Three Mile Island in Pennsylvania'. The Commission was chaired by Dr. John G. Kemeny, then President of Dartmouth College. (A list of all members of The Kemeny Commission is provided in Attachment to the Appendix ). The report of the commission's findings and recommendations was transmitted to the President in October 1979. During this same period, the nuclear utility industry responded to TMI by creating the Institute of Nuclear Power Operations (INPO) with a mission to promote the highest levels of safety and reliability - to promote excellence - in the operation of nuclear electric generating plants. In addition, the Nuclear Safety Analysis Center (NSAC) was established at the Electric Power Research Institute (EPRI to evaluate the accident and assist in determining the best industry response. In a White House paper (and press release) of December 7 1979, the President announced that he agreed fully with the spirit and intent of al the Kemeny Commission recommendations and requested that the industry and The Nuclear Regulatory Commission (NRC) comply with the recommendations. The President also recognized the industry initiative in establishing INPO and called for several actions involving the Institute; the President directed the Department of Energy and other government agencies to provide assistance to INPO and the industry. An overall status of the nuclear utility industry responses to Kemeny Commission recommendations in the key areas directly related to nuclear plant operations is provided below. A more detailed status of industry responses to the

  8. Diverting indirect subsidies from the nuclear industry to the photovoltaic industry: Energy and financial returns

    International Nuclear Information System (INIS)

    Zelenika-Zovko, I.; Pearce, J.M.

    2011-01-01

    Nuclear power and solar photovoltaic energy conversion often compete for policy support that governs economic viability. This paper compares current subsidization of the nuclear industry with providing equivalent support to manufacturing photovoltaic modules. Current U.S. indirect nuclear insurance subsidies are reviewed and the power, energy and financial outcomes of this indirect subsidy are compared to equivalent amounts for indirect subsidies (loan guarantees) for photovoltaic manufacturing using a model that holds economic values constant for clarity. The preliminary analysis indicates that if only this one relatively ignored indirect subsidy for nuclear power was diverted to photovoltaic manufacturing, it would result in more installed power and more energy produced by mid-century. By 2110 cumulative electricity output of solar would provide an additional 48,600 TWh over nuclear worth $5.3 trillion. The results clearly show that not only does the indirect insurance liability subsidy play a significant factor for nuclear industry, but also how the transfer of such an indirect subsidy from the nuclear to photovoltaic industry would result in more energy over the life cycle of the technologies. - Highlights: → The indirect insurance liability subsidy has been quantified over the life cycle of the U.S. nuclear fleet. → It was found to play a significant factor in the economics of the nuclear industry. → A transfer of such an indirect subsidy from the nuclear to photovoltaic industry would result in significantly more energy over the life cycle of the technologies.

  9. Manpower development in the US nuclear power industry

    International Nuclear Information System (INIS)

    Todreas, N.E.; Foulke, L.R.

    1985-01-01

    This paper reviews the history and current status of the university nuclear education sector and the utility training sector of the United States (US) nuclear power industry. Recently, the number of programs in the university nuclear education sector has declined, and the remaining programs are in need of both strong governmental and industrial assistance if they are to remain a stable source for educating nuclear engineers and health physicists to staff the resurgence of the nuclear power industry. The utility training sector has undergone remarkable development since the TMI-2 accident. Programs to recruit, train, and qualify the variety of personnel needed, as well as the steps to accredit these programs, are being developed on a systematic, industry-wide basis. A number of new technologies for educating and training personnel are emerging which may be used to create or improve learning environments. Manpower development for the US nuclear power industry is a shared responsibility among the universities, the nuclear utilities, and the nuclear suppliers. This shared responsibility can continue to be best discharged by enhancement of the interaction among all parties with respect to evaluating the proper level of cognitive development within the utility training program

  10. Spanish Nuclear Industry in Lungmen Project

    International Nuclear Information System (INIS)

    Alomar, F.

    1998-01-01

    Spain's Advanced Nuclear Reactors Programs, under DTN's leadership, has meant an active participation the American Design of Advanced Nuclear Power Plants, in both General Electric and Westinghouse Programs. This collaboration has given to the Companies, which directly involved, an in-depth knowledge of both Development Programs, as well as it has allowed to establish relationships with Nuclear Island DTN's coordination. These Companies included a broad sample of Spanish Companies most interest in the Nuclear Field: DTN representing Spanish Utilities with Nuclear Assets; Empresarios Agrupados and INITEC as a Joint Venture, representing Spanish A/E; Equipos Nucleares, S.A., representing Nuclear Components Manufacturers; Tecnatom, representing Nuclear Services and Engineering and CIEMAT as National Laboratory. Taiwan Electric Power has awarded its two 1300 MWe Lungmen Units to General Electric. Knowledge acquired by these Spanish Companies along FOAKE First of kind then Engineering has allowed them to bid for some authorities in Lungmen NPP and in some cases to get important awards. Furthermore, the good working relationship which has been established has made way for other Spanish Companies to bid for other Project Packages. On a case by case basis the response of Spanish manufacturer has been irregular . In some instances manufactures have stopped manufacturing nuclear components, and in other instances a distinct lack of interest has been detected. (Author)

  11. Annual report 1999 - Brazil Nuclear Industry (INB)

    International Nuclear Information System (INIS)

    2000-01-01

    This document presents the 1999 annual report covering the following activities: nuclear fuel, resources and application, ISO 9001, environment social activities, personnel, financial indicators, and countability

  12. Japan's nuclear industry; taking off in the mist

    International Nuclear Information System (INIS)

    1979-01-01

    This survey of the nuclear industry aimed at investigating the results and prospects of nuclear energy-related sales, expenditures and manpower in electric utilities, mining and manufacturing industries and trading companies in Japan, so that the study of the economic aspects of the nuclear industry and the analysis of problems may contribute to the sound development of the industry and provide with fundamental informations for interested persons in all sectors. It covers the fiscal year 1978, and is the 20th of a series of annual investigations. The fiscal year 1978 began with the court ruling on the Ikata case, and ended with the impact of the accident in the Three Mile Island plant, USA. As for the results of survey, the answers to questionnaire, the trend of expenditures, the trend of sales, the trend of manpower, the prospects for the future, and the flow of money in the nuclear industry are reported. The gross expenditures in private industries increased by 41% to 1,450 billion yen in comparison with the previous fiscal year. Sales exceeded expenditures by 12,600 million yen in mining and manufacturing industries. Manpower increased by 9% in electric utilities and 7% in mining and manufacturing industries. The construction of 3 nuclear power plants is due to start in fiscal 1978. (Kako, I.)

  13. Skoda JS's proposal for Slovak nuclear power industry

    International Nuclear Information System (INIS)

    Borovec, J.

    2004-01-01

    In this presentation author deals with the structure and revenues of the Skoda JS, a.s., as well as productions of the company for nuclear power industry in the Czech Republic, Ukraine and the Slovak Republic

  14. Consideration of nuclear technology development on agricultural industrialization in Xinjiang

    International Nuclear Information System (INIS)

    Xu Fang; Xie Yinghua; Lei Bin

    2010-01-01

    This review describes the application of nuclear technology in Xinjiang agriculture along with industrialization and economic benefit since 1970s. Current problems in this field were analyzed and corresponding advices were presented. (authors)

  15. Supplier quality assurance systems: a study in the nuclear industry

    International Nuclear Information System (INIS)

    Singer, A.J.; Churchill, G.F.; Dale, B.G.

    1988-01-01

    The results are reported of a study which investigated the impact of quality assurance on 13 suppliers to the nuclear industry. The purpose of the study was to determine the benefits and problems of applying quality assurance in the supply of high risk plant items and material for nuclear installations. The paper discusses the problems facing the industry including: multiple audits and inspections, the irritation with having to contend with two quality system standards (namely BS 5750 and BS 5882) and the cost effectiveness of the more stringent quality system and quality control surveillance requirements imposed by the nuclear industry. It is also pointed out that companies supplying non-nuclear industrial customers were dissatisfied with the qualifications, experience and professional competence of some auditors and many inspectors. (author)

  16. Cycle of radionuclides released into waters by the nuclear industry

    International Nuclear Information System (INIS)

    Bovard, A.; Grauby, A.

    1975-01-01

    A review is made of the main radionuclides released by nuclear industry into the aquatic environment. The water-sediment interactions, the uptake of radionuclides by aquatic organisms and the problem of irrigation water are considered [fr

  17. Nuclear industry in a country with a substantial oil reserve

    International Nuclear Information System (INIS)

    Alvarez, R.; Castillo, H.; Costa, D.; Galan, I.; Martinez, M.

    1981-01-01

    The importance of the development of a nuclear industry in a country like Mexico, with a substantial oil reserve is analyzed, taking into account the technical, economical, political, ecological and social aspects of the problem. (author)

  18. Ion exchange in the nuclear industry

    International Nuclear Information System (INIS)

    Bibler, J.P.

    1990-01-01

    Ion exchange is used in nearly every part of the nuclear fuel cycle -- from the purification of uranium from its ore to the final recovery of uranium and transmutation products. Ion exchange also plays a valuable role in the management of nuclear wastes generated in the fuel cycle

  19. Nuclear energy can compete, industry watchers say

    International Nuclear Information System (INIS)

    Cash, C.J.

    1995-01-01

    Nuclear power plants with outstanding operating records and cost-conscious management can continue to compete with other forms of generation as the electricity business becomes more competitive. Natural gas-fired units will set the pricing standard with which nuclear power plants must compete

  20. Perspectives of development in the nuclear industry

    International Nuclear Information System (INIS)

    Barthelt, K.

    1987-01-01

    Modern economy cannot do without electricity, and safe and reliable electricity supply cannot do without nuclear power. This implies that the F.R.G. will continue to build nuclear power stations, and as the power stations of the future benefit from the experience gained with existing plant, there will be continuous improvement in terms of safety, pollution control, and economics. (orig.) [de

  1. Update: nuclear power program information and data, April-June 1982

    International Nuclear Information System (INIS)

    1982-01-01

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interst to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office

  2. Update: nuclear power program information and data, October-December 1981

    International Nuclear Information System (INIS)

    1981-01-01

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office

  3. UPDATE: Nuclear Power Program information and data, July-September 1984

    International Nuclear Information System (INIS)

    1985-02-01

    UPDATE is published by the Office of Converter Reactor Deployment, Office of Nuclear Energy, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Energy and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office

  4. Update: nuclear power program information and data, March-April 1981

    International Nuclear Information System (INIS)

    1981-01-01

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office

  5. UPDATE: nuclear power program information and data, May-June 1981

    International Nuclear Information System (INIS)

    1981-01-01

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current of nuclear status powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new development in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilities quick response for data and information of the type often solicited from this office

  6. Update: nuclear power program information and data, October-December 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office.

  7. Comprehensive survey of the Russian nuclear industry

    International Nuclear Information System (INIS)

    2004-03-01

    This document presents the organization of nuclear activities in the Russian federation: Minatom and its replacement by the federal agency of atomic energy, personnel, nuclear power plants (VVER, RBMK, fast neutron and mixed reactors), availability and power production, export of activities (construction of nuclear power plants in Slovakia, Iran, China, India, project in Viet Nam), expansion of the nuclear power plants park (improvement of plants safety, increase of service life), completion of uncompleted plants, the construction of which was stopped after the Chernobyl accident and the reorganization of the former-USSR, construction of new generation power plants (VVER-640, -1000 and -1500), fuel cycle facilities (geographical distribution, production of natural uranium, conversion and enrichment), fuel fabrication, reprocessing processes and spent fuel storage, management of radioactive wastes (leasing), R and D activities (organizations and institutes), research programs of the international scientific and technical center, nuclear safety authority (Gosatomnadzor - GAN). (J.S.)

  8. The impact of computers on the nuclear utility industry

    International Nuclear Information System (INIS)

    Taylor, J.J.

    1984-01-01

    The applications of computer technology to the nuclear utility industry are discussed in light of recent phenomenal growth of computer hardware and software. Computer applications in existence in the power plants are presented, as well as potential future development for plant design, construction, operation, maintenance and retrofit. Utility concerns are addressed. The study concludes that the applications of computer technology to the nuclear utility industry are highly promising and evolutionary in nature

  9. Cyber security best practices for the nuclear industry

    International Nuclear Information System (INIS)

    Badr, I.

    2012-01-01

    When deploying software based systems, such as, digital instrumentation and controls for the nuclear industry, it is vital to include cyber security assessment as part of architecture and development process. When integrating and delivering software-intensive systems for the nuclear industry, engineering teams should make use of a secure, requirements driven, software development life cycle, ensuring security compliance and optimum return on investment. Reliability protections, data loss prevention, and privacy enforcement provide a strong case for installing strict cyber security policies. (authors)

  10. Radioactive waste management in the VS military nuclear industry

    International Nuclear Information System (INIS)

    Kobal'chuk, O.V.; Kruglov, A.K.; Sokolova, I.D.; Smirnov, Yu.V.

    1989-01-01

    Organization and plans of radioactive waste management in the US military nuclear industry, determining transition from the policy of temporal waste storage to their final and safe disposal are presented. Programs of long-term management of high-level, transuranium and low-level wastes, the problems of the work financing and the structure of management activities related to the radioactive waste processing military nuclear industry enterprises are considered

  11. Cyber security best practices for the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Badr, I. [Rational IBM Software Group, IBM Corporation, Evanston, IL 60201 (United States)

    2012-07-01

    When deploying software based systems, such as, digital instrumentation and controls for the nuclear industry, it is vital to include cyber security assessment as part of architecture and development process. When integrating and delivering software-intensive systems for the nuclear industry, engineering teams should make use of a secure, requirements driven, software development life cycle, ensuring security compliance and optimum return on investment. Reliability protections, data loss prevention, and privacy enforcement provide a strong case for installing strict cyber security policies. (authors)

  12. Applications of neutron radiography for the nuclear power industry

    Energy Technology Data Exchange (ETDEWEB)

    Craft, Aaron E.; Barton, John P.

    2016-11-01

    The World Conference on Neutron Radiography (WCNR) and International Topical Meeting on Neutron Radiography (ITMNR) series have been running over 35 years. The most recent event, ITMNR-8, focused on industrial applications and was the first time this series was hosted in China. In China, more than twenty new nuclear power plants are in construction and plans have been announced to increase the nuclear capacity further by a factor of three within fifteen years. There are additional prospects in many other nations. Neutron tests were vital during previous developments of materials and components for nuclear power applications, as reported in this conference series. For example a majority of the 140 papers in the Proceedings of the First WCNR are for the benefit of the nuclear power industry. Included are reviews of the diverse techniques being applied in Europe, Japan, the United States, and at many other centers. Many of those techniques are being utilized and advanced to the present time. Neutron radiography of irradiated nuclear fuel provides more comprehensive information about the internal condition of irradiated nuclear fuel than any other non-destructive technique to date. Applications include examination of nuclear waste, nuclear fuels, cladding, control elements, and other critical components. In this paper, the techniques developed and applied internationally for the nuclear power industry since the earliest years are reviewed, and the question is asked whether neutron test techniques can be of value in development of the present and future generations of nuclear power plants world-wide.

  13. The right understanding of nuclear power industry

    International Nuclear Information System (INIS)

    Baetjer, K.; Begemann, K.; Bleck, J.; Boikat, U.; Carbonell, P.; Helmers, H.; Kirchner, J.; Muschol, E.; Scheer, J.; Schmitz-Feuerhake, I.

    1978-09-01

    As the abstractor found himself unable to point out all the errors of the book, the statement on the back cover is cited in full wording: A boom for nuclear power - in the next 10 years, 40 nuclear power plants will be built in West Germany alone. It is a wellprepared boom: For 20 years, the public has heard about 'cheap, safe, and clean, nuclear power. Yet in spite of this, there is an ever increasing resistance of the public which finds itself threatened, misinformed and lost - left alone also by natural scientists who do not speak in the controversy or against the nuclear propaganda. Here is where this book intends to help. It was written by a group of scientists, students and staff of Bremen university. For three years, they have followed the public discussion of the nuclear problem, often acting as experts on behalf of citizen's groups. In this book, they refer to the propaganda leaflet '66 questions - 66 answers - for a better understanding of nuclear power', which has been distributed in 200,000 copies. To each of the questions and answers they give a detailed reply from the point of view of nuclear power plant opponents. With a summarizing epilogue and a list of explanations of abbreviations and keywards. (orig./HP) [de

  14. Modelling human resource requirements for the nuclear industry in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Roelofs, Ferry [Nuclear Research and Consultancy Group (NRG) (Netherlands); Flore, Massimo; Estorff, Ulrik von [Joint Research Center (JRC) (Netherlands)

    2017-11-15

    The European Human Resource Observatory for Nuclear (EHRO-N) provides the European Commission with essential data related to supply and demand for nuclear experts in the EU-28 and the enlargement and integration countries based on bottom-up information from the nuclear industry. The objective is to assess how the supply of experts for the nuclear industry responds to the needs for the same experts for present and future nuclear projects in the region. Complementary to the bottom-up approach taken by the EHRO-N team at JRC, a top-down modelling approach has been taken in a collaboration with NRG in the Netherlands. This top-down modelling approach focuses on the human resource requirements for operation, construction, decommissioning, and efforts for long term operation of nuclear power plants. This paper describes the top-down methodology, the model input, the main assumptions, and the results of the analyses.

  15. Modelling human resource requirements for the nuclear industry in Europe

    International Nuclear Information System (INIS)

    Roelofs, Ferry; Flore, Massimo; Estorff, Ulrik von

    2017-01-01

    The European Human Resource Observatory for Nuclear (EHRO-N) provides the European Commission with essential data related to supply and demand for nuclear experts in the EU-28 and the enlargement and integration countries based on bottom-up information from the nuclear industry. The objective is to assess how the supply of experts for the nuclear industry responds to the needs for the same experts for present and future nuclear projects in the region. Complementary to the bottom-up approach taken by the EHRO-N team at JRC, a top-down modelling approach has been taken in a collaboration with NRG in the Netherlands. This top-down modelling approach focuses on the human resource requirements for operation, construction, decommissioning, and efforts for long term operation of nuclear power plants. This paper describes the top-down methodology, the model input, the main assumptions, and the results of the analyses.

  16. The status of ISI in the UK nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Bann, T.; Rogerson, A. [AEA Technology, Risley (United Kingdom). Nuclear NDE Services

    1999-08-01

    This paper reviews the status of in-service inspection (ISI) in UK nuclear power generation industry through the experience of its nuclear utilities. The paper is intended to be a summary of some of the most recent and relevant ISI issues facing the utilities and the solutions devised to address those issues. (orig.)

  17. Fallout: the defence, industrial and technological benefits of nuclear deterrence

    International Nuclear Information System (INIS)

    Tertrais, Bruno

    2015-01-01

    In the current climate of budgetary restrictions, it is fair to question the weight of military nuclear defence spending. Upon examination, however, nuclear deterrence has numerous military, industrial, and technological benefits. It is, in fact, totally intertwined with the other elements of our defence system. (author)

  18. Activities of Japan Nuclear Technology Institute Japanese TSO of Industry

    International Nuclear Information System (INIS)

    Nagata, T.

    2010-01-01

    Nuclear energy is a superior form of energy in that it delivers stable power supplies and counters global warming, and it is important to promote nuclear power generation as the core power sources for a nation. However, the Japanese environment surrounding nuclear energy is changing drastically, following the liberalization of market and recent series of troubles or falsifications shaking public confidence in nuclear energy. In the above mentioned situation, nuclear industries and organizations must fulfill their individual roles, and amass its strength to work toward enhancing industry initiatives for safety activities, securing safe / stable plant operations, restoring public confidence and initiate revitalization of nuclear energy operations. The Japan Nuclear Technology Institute (JANTI) has been established as a new entity for supporting and leading the industry's further progress in March 2005. Members of JANTI are not only utilities but also component manufacturers and constructors. JANTI enhance the technological foundation of nuclear energy based on scientific and rational data, coordinates its use among a wide range of relevant organizations, and helps members enhance their voluntary safety activities. At the same time, it is independent of utilities, and exercises a function of checking industry at the objective, third-party standpoint. As for the activities of JANTI itself, information disclosure and the establishment of a council comprising external members will enhance administration transparency. (author)

  19. The french nuclear industry is looking for an american partner

    International Nuclear Information System (INIS)

    2001-01-01

    In the same time of the nuclear industry revival in USA by the President Bush, TOPCO the holding society which is going to group the main french nuclear society, is looking for an american partner. This report deals with the economic and political aspects of the situation. (A.L.B.)

  20. Activity report 2006 - INB - Brazilian Nuclear Industries Inc

    International Nuclear Information System (INIS)

    2006-01-01

    This document reports the activities of Brazilian Nuclear Industry company during 2006 as follows: uranium isotope enrichment; production of nuclear fuel; mineral resources; finance and administration; planning and sales; quality, safety and environment, communication and social action; economic and financial management

  1. Specific features of occupational medicine in nuclear research and industry

    International Nuclear Information System (INIS)

    Giraud, J.M.; Quesne, B.

    2003-01-01

    Measures to prevent the exposure of personnel to ionising radiation were taken as soon as the first nuclear laboratories were set up. This branch of occupational preventive medicine has since kept pace with advances in research and in the industrial applications of nuclear energy. (authors)

  2. Industrial organization. The government draws a new french nuclear landscape

    International Nuclear Information System (INIS)

    Foucher, N.

    2000-01-01

    This paper presents and explains the new nuclear industry. In order to rationalize Cogema and Framatome are going to be grouped in an holding called Topco with a nuclear pole and an electronic and new technologies pole. Framatome will be split in two parts and its connector technology subsidiary will be introduced on Change. (A.L.B.)

  3. Nuclear power: which industrial approach will preserve a French asset?

    International Nuclear Information System (INIS)

    Machenaud, H.

    2012-01-01

    France's strategic decision in favor of nuclear energy in the 1970's has given rise to an organization of this industry with clearly defined roles and responsibilities for all parties. This has led to the mastering of industrial production of the whole chain from mining to fuel reprocessing and to waste disposal. Nuclear safety was at any stage of the chain the priority number one. The French nuclear industry is present on the international scene and thus maintain its know-how and capacities despite the ups and downs of the nuclear market. Today 240.000 people work in France in the nuclear sector. France has followed a consistent energy policy during the last 50 years and benefits from an important and homogeneous fleet of reactors which has generated a rich feedback experience on reactor operation. The tasks that face the French nuclear industry are: -) to comply with the requirements of the Complementary Safety Assessments that have been performed on all French nuclear facilities, -) to maintain and upgrade the power plants (most of them are facing their 3. decennial overhaul), -) to prepare the nuclear systems of tomorrow, and -) to export the French know-how

  4. Nevada Nuclear Waste Storage Investigations, January-June 1987: An update

    International Nuclear Information System (INIS)

    Tamura, A.T.; Lorenz, J.J.

    1988-03-01

    This update contains information on the Nevada Nuclear Waste Storage Investigations (NNWSI) that was added to the DOE Energy Data Base during the first six months of 1987. The update is categorized by principal NNWSI Project participating organization, and items are arranged in chronological order. Participant-sponsored subcontractor reports, papers, and articles are included in the sponsoring organization's list. The publication following this update will be a supplement to the first bibliography (DOE/TIC-3406) and will include all information retrieved from January 1, 1986, to December 31, 1987. It will be a cumulation of all updates for this two-year interval and will include indexing for: Corporate Author, Personal Author, Subject, Contract Number, Report Number, Order Number Correlation, and Key Word in Context

  5. Korean nuclear industry hit by corruption

    Science.gov (United States)

    Park, Soo Bin

    2013-12-01

    After a four-month investigation, a court in South Korea has indicted 100 officials and suppliers on corruption charges over bogus safety certifications for parts that were supplied to some of the country's 23 nuclear reactors.

  6. The big awakening of nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    2007-01-01

    The Earth's increasing need for energy will lead to a rebirth of nuclear energy all over the world. From now to 2030 the generation of electric power of nuclear origin will double. Beyond, a new generation of reactors, more efficient, will have to take over. In the meantime, reactor manufacturers and power companies, Areva and EdF first, are taking position. The urgency is also to invest in training for the recruitment of young engineers. The next generation of reactors (generation 4) which will be able to better exploit and recycle the fuel with an improved safety, will need 20 more years of research. Two solutions among the sixth proposed are more particularly studied by France: the sodium-cooled FBR and the helium-cooled VHTR. However, the French public opinion asks for more transparency in the nuclear affairs even if no real will for a renunciation of nuclear energy has been expressed so far. (J.S.)

  7. Building world-wide nuclear industry success stories - Safe management of nuclear waste and used nuclear fuel

    International Nuclear Information System (INIS)

    Saint-Pierre, S.

    2005-01-01

    Full text: This WNA Position Statement summarizes the worldwide nuclear industry's record, progress and plans in safely managing nuclear waste and used nuclear fuel. The global industry's safe waste management practices cover the entire nuclear fuel-cycle, from the mining of uranium to the long-term disposal of end products from nuclear power reactors. The Statement's aim is to provide, in clear and accurate terms, the nuclear industry's 'story' on a crucially important subject often clouded by misinformation. Inevitably, each country and each company employs a management strategy appropriate to a specific national and technical context. This Position Statement reflects a confident industry consensus that a common dedication to sound practices throughout the nuclear industry worldwide is continuing to enhance an already robust global record of safe management of nuclear waste and used nuclear fuel. This text focuses solely on modern civil programmes of nuclear-electricity generation. It does not deal with the substantial quantities of waste from military or early civil nuclear programmes. These wastes fall into the category of 'legacy activities' and are generally accepted as a responsibility of national governments. The clean-up of wastes resulting from 'legacy activities' should not be confused with the limited volume of end products that are routinely produced and safely managed by today's nuclear energy industry. On the significant subject of 'Decommissioning of Nuclear Facilities', which is integral to modern civil nuclear power programmes, the WNA will offer a separate Position Statement covering the industry's safe management of nuclear waste in this context. The safe management of nuclear waste and used nuclear fuel is a widespread, well-demonstrated reality. This strong safety record reflects a high degree of nuclear industry expertise and of industry responsibility toward the well-being of current and future generations. Accumulating experience and

  8. Nuclear fuel supply industry in the European Community belgatom

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    Deals with the industrial activities involved in the Nuclear Fuel Cycle in European Economic Community countries and essentially with operations pertaining to commercial light water reactors (LWR's). Various aspects of needs, investments, plant capacities, costs and prices, markets, financing methods, industrial structures, and employment are considered in detail

  9. Trends in occupational exposure within the UK civil nuclear industry

    International Nuclear Information System (INIS)

    Hughes, J.S.

    1996-01-01

    The UK civil nuclear industry was established in the 1950s and workers in the industry have received occupational radiation exposures since that time. Data on occupational exposures over this period show a reduction in annual doses. This trend was initiated by more restrictive statutory dose limitation requirements, and was achieved by greater emphasis on radiation protection methods. (Author)

  10. Estimating Fire Risks at Industrial Nuclear Facilities

    International Nuclear Information System (INIS)

    Coutts, D.A.

    1999-01-01

    The Savannah River Site (SRS) has a wide variety of nuclear production facilities that include chemical processing facilities, machine shops, production reactors, and laboratories. Current safety documentation must be maintained for the nuclear facilities at SRS. Fire Risk Analyses (FRAs) are used to support the safety documentation basis. These FRAs present the frequency that specified radiological and chemical consequences will be exceeded. The consequence values are based on mechanistic models assuming specific fire protection features fail to function as designed

  11. Nuclear dual-purpose plants for industrial energy

    International Nuclear Information System (INIS)

    Klepper, O.H.

    1976-01-01

    One of the major obstacles to extensive application of nuclear power to industrial heat is the difference between the relatively small energy requirements of individual industrial plants and the large thermal capacity of current power reactors. A practical way of overcoming this obstacle would be to operate a centrally located dual-purpose power plant that would furnish process steam to a cluster of industrial plants, in addition to generating electrical power. The present study indicates that even relatively remote industrial plants could be served by the power plant, since it might be possible to convey steam economically as much as ten miles or more. A survey of five major industries indicates a major potential market for industrial steam from large nuclear power stations

  12. History and update of the U.S. program for the management of used nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Isaacs, T. [US Blue Ribbon Commission, Washington, DC (United States)

    2015-07-01

    This paper discusses the history and gives an update of the US program for the management of used nuclear fuel. The key issue in the deliberation was the option of long-term monitored storage versus disposal capability. The decision was to give future generations the option of disposal.

  13. The roles of industry for internationalization of nuclear fuel cycle

    International Nuclear Information System (INIS)

    Choi, Jor-Shan; Oda, Takuji; Tanaka, Satoru; Kuno, Yusuke

    2011-01-01

    To meet increasing energy demand and counter climate change, nuclear energy is expected to expand during the next decades in both developed and developing countries. The Fukushima accident in Japan in March 2011 may dampen the expansion, but it would proceed and continue when the Fukushima lessons are learned. This expansion, most visibly in Asian would be accompanied with complex and intractable challenges to global stability and nuclear security, notably, on 'how to reduce security and proliferation concerns if nuclear power is introduce and when used fuel is generated in less stable regions of the world?' The answers to the question may lie in the possibility of multilateral control of nuclear materials and technologies in the nuclear fuel cycle, including the provision of a 'cradle-to-grave' fuel cycle service, presumably by the nuclear industries and their respective governments. This paper evaluates the importance of such industry-government cooperative initiative and explores into the roles which the nuclear industry should play to ensure that the world would not be 'creating proliferation when expanding the application of nuclear power to emerging nuclear countries'. (author)

  14. Biometrics and smart card based applications for nuclear industry

    International Nuclear Information System (INIS)

    Nishanth Reddy, J.; Dheeraj Reddy, J.; Narender Reddy, J.

    2004-01-01

    Biometrics has emerged as a convenient, foolproof and well-accepted technology for identification around the globe. Nucleonix has developed innovative solutions based on finger scan biometrics for various industries. This paper closely looks into the application areas for the nuclear industry and how it will benefit this industry, in terms of identification, access control, security of PCs and applications, attendance, machinery usage control and other custom applications. (author)

  15. Industrial applications of nuclear techniques in Poland

    International Nuclear Information System (INIS)

    Michalik, J.St.

    1981-01-01

    Application of radioisotope techniques in a number of Polish industries was reviewed. Studies on the usage of radiotracer as an evaluation method for technological processes were carried out and the advantages of such application were discussed

  16. NIC (Nuclear Industry in China) exhibition. Press file

    International Nuclear Information System (INIS)

    1998-01-01

    Framatome participated to the NIC exhibition which took place in Beijing (China) on March 1998. This press dossier was distributed to visitors. It presents in a first part the activities of the Framatome group in people's republic of China (new constructions (Daya Bay, Ling Ao project), technological cooperation and contracts in the nuclear domain, technology transfers in the domain of nuclear fuels, activities and daughter companies in the domain of industrial equipments, Framatome Connectors International (FCI) daughter company in the domain of connectors engineering). Then, the general activities of Framatome in the nuclear, industrial equipment, and connectors engineering domains are summarized in the next 3 parts. (J.S.)

  17. Advances in chemical engineering in nuclear and process industries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    Symposium on Advances in Chemical Engineering in Nuclear and Process Industries dealt with a wide spectrum of areas encompassing various industries such as nuclear, fertilizer, petrochemical, refinery and cement. The topics covered in the symposium dealt with the advancements in the existing fields of science and technologies as well as in some of the emerging technologies such as membrane technology, bio-chemical and photo-chemical engineering etc. with a special emphasis on nuclear related aspects. Papers relevant to INIS are indexed separately.

  18. Advances in chemical engineering in nuclear and process industries

    International Nuclear Information System (INIS)

    1994-06-01

    Symposium on Advances in Chemical Engineering in Nuclear and Process Industries dealt with a wide spectrum of areas encompassing various industries such as nuclear, fertilizer, petrochemical, refinery and cement. The topics covered in the symposium dealt with the advancements in the existing fields of science and technologies as well as in some of the emerging technologies such as membrane technology, bio-chemical and photo-chemical engineering etc. with a special emphasis on nuclear related aspects. Papers relevant to INIS are indexed separately

  19. Environmental racism: the US nuclear industry and native Americans

    International Nuclear Information System (INIS)

    Lehtinen, Ulla

    1997-01-01

    The author argues that the United States nuclear industry has acted in a discriminatory fashion towards Native American peoples and the land they hold as reservations. Both uranium mining and nuclear weapons testing is commonplace and plans now exist to locate a low-level radioactive waste dump in the Mojave desert in California, a sacred site for many native people. Opposition to such plans is growing among the Native Americans, sharpened by their existing commitment to conservation of the environment, but on their own, they are not a lobby powerful enough to oppose the might of the nuclear industry. (UK)

  20. Environmental racism: the US nuclear industry and native Americans

    Energy Technology Data Exchange (ETDEWEB)

    Lehtinen, Ulla [Organization of the Fourth World - First Peoples (Finland)

    1997-03-01

    The author argues that the United States nuclear industry has acted in a discriminatory fashion towards Native American peoples and the land they hold as reservations. Both uranium mining and nuclear weapons testing is commonplace and plans now exist to locate a low-level radioactive waste dump in the Mojave desert in California, a sacred site for many native people. Opposition to such plans is growing among the Native Americans, sharpened by their existing commitment to conservation of the environment, but on their own, they are not a lobby powerful enough to oppose the might of the nuclear industry. (UK).

  1. Fukushima two years after: the 'irresponsible' nuclear industry

    International Nuclear Information System (INIS)

    Froggatt, Antony; McNeill, David; Thomas, Stephen; Teule, Rianne; Blomme, Brian; Erwood, Steve; Schulz, Nina; Encina, Delphine de la; Beranek, Jan; Casper, Kristin; Haverkamp, Jan; Higashizawa, Yasushi; McNevin, Greg; Riccio, Jim; Sekine, Ayako; Stensil, Shawn-Patrick; Suzuki, Kazue; Takada, Hisayo; Tumer, Aslihan; Cowell, Sue

    2013-03-01

    This report demonstrates how the nuclear sector evades responsibility for its failures. The nuclear industry is unlike any other industry: it is not required to fully compensate its victims for the effects of its large, long-lasting, and trans-boundary disasters. In this report, the current status of compensation for victims of the Fukushima disaster is analysed as an example of the serious problems due to lack of accountability for nuclear accidents. The report also looks into the role of nuclear suppliers in the failure of the Fukushima reactors. In addition, this report addresses two main protections for the industry: - Liability conventions and national laws limit the total amount of compensation available and protect nuclear suppliers, the companies that profit from the construction and operation of reactors, from any liability. This caps the funds available for victims at a fraction of real costs and removes incentives for supplier companies to take measures to reduce nuclear risks. - The complexity of and multiple layers in the nuclear supply chain exacerbate the lack of accountability for nuclear suppliers. Even though hundreds of different suppliers are providing components and services that are critical for reactor safety, these companies cannot be held accountable in case of problems. Chapter 1 of this report details the struggle of nuclear victims for fair compensation. Chapter 1 also investigates the role of the nuclear supplier companies in the Fukushima reactors. Chapter 2 gives an overview of the existing international nuclear liability conventions, and maps the impact of these problematic rules, such as capping total compensation, excluding suppliers from accountability, and allowing operators not to have sufficient financial security to cover the damages. Chapter 3 explores the involvement of suppliers throughout the lifetime of a nuclear reactor, and their responsibilities in terms of nuclear risks

  2. Update on the REIPPPP, clean coal, nuclear, natural gas

    CSIR Research Space (South Africa)

    Milazi, Dominic

    2015-12-01

    Full Text Available , clean coal, nuclear, natural gas The Sustainable Energy Resource Handbook Volume 6 Dominic Milazi, Dr Tobias Bischof-Niemz, Abstract Since its release in 2011, the Integrated Resource Plan (IRP 2010-2030), or IRP 2010, has been the authoritative... text setting out South Africa’s electricity plan over the next 20 years. The document indicates timelines on the roll out of key supply side options such as renewable energy, the nuclear, natural gas and coal build programmes, as well as peaking...

  3. Long-range goal setting in the nuclear utility industry

    International Nuclear Information System (INIS)

    Beard, P.M.

    1986-01-01

    The Institute of Nuclear Power Operation's (INPO's) programs support the industry's efforts to improve performance in nuclear plant safety and reliability. The success of these programs can best be measured by the progress of the industry. As utilities focused their attention on nuclear plant performance, the Institute's goal was to make sure its programs and activities provided the best possible support for these efforts. INPO continues to coordinate an industry-wide plant performance indicator program to assist member utilities in assessing station performance. Closely related to this effort is the nuclear industry's establishment of long-range plant performance goals. The US nuclear utility industry currently sends INPO quarterly data on 28 key performance indicators. INPO analyzes these data and provides periodic reports to its members and participants. Selected highlights of INPO's Performance Indicators for the US Nuclear Utility, dated June 1986, are discussed. Throughout 1985, INPO interacted with members, participants, and three external ad hoc review groups to refine the overall performance indicators and to develop background for each unit. By April 1986, each utility had developed long-term goals for each unit. By April 1986, each utility had developed long-term goals for most of the overall indicators. These goals represent a commitment to achievement of excellence when applied to the day-to-day conduct of plant operations, and provide a framework for action

  4. The future of the nuclear industry: a matter of communication

    Energy Technology Data Exchange (ETDEWEB)

    De Waal, H S

    1993-11-01

    Since the very first successes achieved by the early scientists the infant nuclear industry was plagued by an atmosphere of uncertainty, conflict, anxiety and expectations. After the initial euphoria the Chernobyl accident shocked public opinion and perspectives changed. Nuclear energy is experience by the public in three dimensions. Firstly there are the technical realities of the reactor and its fantastically reduced source of power. Secondly, there is a psychological and political meaning, including the association of modern technology with authority, government, and control. The third dimension is the product of old myths about `divine secrets`, mad scientists dreadful pollution and cosmic apocalypse. To a large extent the nuclear industry is at fault for these emotional connotations. An early lapse in the communication process can be blamed for many of the misconceptions. The nuclear industry lost an opportunity by sticking to `vagueness`. Recent trends show that a pattern of conditional acceptance is present in public opinion with regard to the nuclear industry. Possible solutions, including better communication, aggressive marketing, and the training of scientists to become communicators, are discussed. A study was done of community attitudes around Koeberg, and it is concluded that the public must be convinced of the fact that nuclear power is clean, safe, cheap and accepted as such by the industrially developed word. 62 refs., 13 figs.

  5. The future of the nuclear industry: a matter of communication

    International Nuclear Information System (INIS)

    De Waal, H.S.

    1993-11-01

    Since the very first successes achieved by the early scientists the infant nuclear industry was plagued by an atmosphere of uncertainty, conflict, anxiety and expectations. After the initial euphoria the Chernobyl accident shocked public opinion and perspectives changed. Nuclear energy is experience by the public in three dimensions. Firstly there are the technical realities of the reactor and its fantastically reduced source of power. Secondly, there is a psychological and political meaning, including the association of modern technology with authority, government, and control. The third dimension is the product of old myths about 'divine secrets', mad scientists dreadful pollution and cosmic apocalypse. To a large extent the nuclear industry is at fault for these emotional connotations. An early lapse in the communication process can be blamed for many of the misconceptions. The nuclear industry lost an opportunity by sticking to 'vagueness'. Recent trends show that a pattern of conditional acceptance is present in public opinion with regard to the nuclear industry. Possible solutions, including better communication, aggressive marketing, and the training of scientists to become communicators, are discussed. A study was done of community attitudes around Koeberg, and it is concluded that the public must be convinced of the fact that nuclear power is clean, safe, cheap and accepted as such by the industrially developed word. 62 refs., 13 figs

  6. Nuclear fuel industry of the republic of Kazakhstan

    International Nuclear Information System (INIS)

    Parfenov, D.; Dara, S.

    2001-01-01

    National Atomic Company Kazatomprom has been established in 1997 by special presidential decree with the purpose to coordinate the former USSR Nuclear Industry enterprises located on the territory of Kazakhstan. The Government of Kazakhstan entrusts the republican nuclear sector's future to Kazatomprom. Although Kazatomprom is a state-owned company and operates on behalf of the government, it is private in terms of ownership, being organized in a form of a closed type joint stock company, and within its structure there are daughter companies with a certain share of private capital. Formally Kazatomprom has started only a few years ago, but it should not create confusion. Because Kazatomprom has only united the USSR traditional nuclear cycle units, which, I want to emphasize for, count as long history as that of the nuclear industry itself. This fact is the guarantee of high quality production culture inherent to the former USSR Defense Industry

  7. Applications of nuclear methods in the automotive industry

    International Nuclear Information System (INIS)

    Schneider, E.W.; Yusuf, S.O.

    1996-01-01

    Over the years nuclear methods have proved to be a valuable asset to industry in general and to the automotive industry in particular. This paper summarizes some of the most important recent contributions of nuclear technology to the development of vehicles having high quality and long-term durability. Radiotracer methods are used to measure engine oil consumption and the wear rates of inaccessible components. Radiographic and tomographic methods are used to image fluids and structures in engines and accessory components. Tracers are used to understand combustion chemistry and quantify fluid flow. Gauging methods are used for inspection and process control. Nuclear analytical methods are used routinely for materials characterization and problem solving. Although nuclear methods are usually considered as the means of last resort, they can often be applied more easily and quickly than conventional methods when those in industrial engineering and R and D are aware of their unique capabilities. (author). 51 refs., 5 figs

  8. SOVT analysis of the nuclear industry in Mexico

    International Nuclear Information System (INIS)

    Fernandez R, E.; Hernandez B, M. C.

    2011-11-01

    In this work the analysis of strengths, opportunities, vulnerabilities and threats (SOVT) of the nuclear industry in Mexico is presented. This industry presents among its strengths that Mexico is a highly electrified country and has a good established normative mark of nuclear security. Although the Secretaria de Energia in Mexico, with base to the exposed in the Programa Sectorial de Energia 2007-2012, is analyzing the convenience of the generation starting from this source, considering the strong technological dependence of the exterior and the limited federal budget dedicated to this field. As a result of the analysis of the SOVT matrix, were found a great number of strengths that threats, although the vulnerabilities list is major to the strengths, the opportunities list is the bigger. Therefore, the nuclear industry can be a sustainable industry, taking the necessary decisions and taking advantage of the detected opportunities. (Author)

  9. A revolution is underway, nuclear industry will be transformed

    International Nuclear Information System (INIS)

    Le Ngo, B.

    2016-01-01

    Nuclear industry is the third industrial sector in France but it has to cope with a difficult financial situation and internal difficulties. We have to turn these difficulties into an opportunity to re-invent nuclear industry itself. Digit tools concerning 'product life management', big-data or 3-dimension simulations must be fully used to reduce construction or maintenance costs. Tomorrow's nuclear industry will use the additive manufacturing that consists in building 3-dimension objects by adding layer-upon-layer of material and that will reduce by a factor 5 the quantity of materials used in production. A new work organizing including a better cooperation between all the links of a chain of suppliers in order to detect and develop new ideas or find new solutions. (A.C.)

  10. EBSD applications in the steel and nuclear industries

    International Nuclear Information System (INIS)

    Nave, M.D.

    2005-01-01

    EBSD has established itself as an invaluable tool for materials science problem-solving in the steel and nuclear industries. In the steel industry, it increases our understanding of the deformation and recrystallization processes that influence the formability of steel sheets. It is also used to improve welding procedures and identify phases that accelerate corrosion. In the nuclear industry, EBSD plays a central role in extending the life of fuel cladding materials by shedding new light on the mechanisms of hydride formation. It is also used in efforts to improve the processing of material used for the storage of nuclear waste. This presentation provides an overview of EBSD applications within these two industries, emphasizing the broad applicability and practical usefulness of the technique. (author)

  11. Nuclear power and carbon dioxide; The fallacy of the nuclear industry's new propaganda

    Energy Technology Data Exchange (ETDEWEB)

    Mortimer, N. (Sheffield City Polytechnic (UK). School of Urban and Regional Studies)

    The increasingly beleaguered nuclear industry is now highlighting the threat of global warming as a justification for its continued expansion. The industry argues that it produces no carbon dioxide and that nuclear power is therefore a key element in any plan to reduce emissions of this greenhouse gas. However an analysis of the entire nuclear fuel cycle shows that nuclear power is responsible for much larger carbon dioxide emissions than several renewable energy options and efficiency measures. Furthermore, a major expansion of nuclear generating capacity would result in huge increases in CO{sub 2} emissions from the nuclear industry due to the need to mine and process progressively lower quality uranium ores. Nuclear power is an expensive, unsustainable, dangerous and ineffective option in any realistic strategy to combat global warming. (Author).

  12. The EU nuclear industry and FORATOM

    International Nuclear Information System (INIS)

    Taipale, T.

    2012-01-01

    Conclusions: Every human activity involves some risk (transport, medical treatment). No-one can guarantee that accidents will never occur. The industry’s duty and commitment is to ensure safety, to reduce the possibility of an accident and mitigate its consequences. Stringent, independent nuclear safety regulation is essential. We cannot afford to lose nuclear energy in Europe – it is a cost effective and low carbon energy source. Electricity production and distribution does not stop at EU’s borders - need to promote a common pan-European energy market

  13. Regulation of the Canadian nuclear industry

    International Nuclear Information System (INIS)

    Gummer, W.K.

    1982-02-01

    This paper reviews the nuclear regulatory process in Canada in the following context. First, the pertinent factors in the present political and economic environment are identified, including both domestic and international matters. Second, the basis for current Atomic Energy Control Board operations is considered, with reference to both the Atomic Energy Control Act (1946) and the proposed Nuclear Control and Administration Act (Bill C-14, 1977). Some specific areas of the regulatory process are discussed in detail to show where ambiguity or uncertainty may arise: these areas are uranium exploration and mining, occupational health and safety, environmental protection, waste management, heavy water plants and transportation

  14. Manpower requirements in the nuclear power industry, 1982-1991

    International Nuclear Information System (INIS)

    Johnson, R.C.

    1982-09-01

    The objective of this study is to project occupational employment needs, created by growth and employee turnover, for the nuclear power industry over the next decade. Employment data for 1981 were collected in a survey conducted by the Institute of Nuclear Power Operations of its 60 member utilities. The data were analyzed statistically to identify factors that account for variations in power plant staffing and the number of off-site nuclear support personnel employed by a utility. Total employment in the nuclear power industry is predicted to increase from 54,400 in 1981 to 73,600 in 1991. Nuclear generating capacity will increase from 58 to 124 gigawatts, based on the midline forecast of the Energy Information Administration. The projections assume that current regulations will remain in effect and no new plans for additional generating facilities will be initiated

  15. Further activities of safety culture toward nuclear transportation industry

    International Nuclear Information System (INIS)

    Machida, Y.; Shimakura, D.

    2004-01-01

    On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power

  16. Further activities of safety culture toward nuclear transportation industry

    Energy Technology Data Exchange (ETDEWEB)

    Machida, Y.; Shimakura, D. [NSnet, Tokyo (Japan)

    2004-07-01

    On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power.

  17. Chernobyl coverage: how the US media treated the nuclear industry

    International Nuclear Information System (INIS)

    Friedman, S.M.; Gorney, C.M.; Egolf, B.P.

    1992-01-01

    This study attempted to uncover whether enough background information about nuclear power and the nuclear industries in the USA, USSR and Eastern and Western Europe had been included during the first two weeks of US coverage of the Chernobyl accident so that Americans would not be misled in their understanding of and attitudes toward nuclear power in general. It also sought to determine if reporters took advantage of the Chernobyl accident to attack nuclear technology or the nuclear industry in general. Coverage was analysed in five US newspapers and on the evening newscasts of the three major US television networks. Despite heavy coverage of the accident, no more than 25% of the coverage was devoted to information on safety records, history of accidents and current status of nuclear industries. Not enough information was provided to help the public's level of understanding of nuclear power or to put the Chernobyl accident in context. However, articles and newscasts generally balanced use of pro- and anti-nuclear statements, and did not include excessive amounts of fear-inducing and negative information. (author)

  18. HRD System and Experience in the Korean Nuclear Industry

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Byoungkook [KHNP Nuclear Power Education Institute, Busan (Korea, Republic of)

    2012-03-15

    Korea began to nurture its nuclear energy pioneers in the 1950s when the government dispatched personnel in research and policy-making areas to foreign institutions. Then in 1959, KAERI was established and now plays a leading role in nuclear technology R and D. In addition, Korea's first research reactor, TRIGA Mark-II, was built and put into operation in 1962. This paved the way for advancements in operation and technical development of nuclear reactors. In turn, these accomplishments led to the birth of Korea's first commercial reactor, Kori Unit 1, in the 1970s, and HRD in the nuclear industry was put on the right track. However, the Korean nuclear industry remained heavily dependent on nuclear exporting countries such as the US, Canada, and France. Already confident in construction, Korea took the lead in building Kori Units 3 and 4 and Ulchin Units 1 and 2 in the 1980s, but the country was still in need of technological self-reliance. In order to achieve this, Korea proactively launched systematic HRD programs and dispatched nuclear professionals to overseas nuclear facilities to secure individuals competent in the areas of NPP operations, plant design, and major equipment manufacturing. Thanks to its diligent endeavors, Korea's nuclear entities established independent nuclear training institutes in the 1990s and began producing a large number of competent personnel. This allowed the country to ensure not only the best operation and maintenance engineers but also the essential nuclear technology required for plant design and equipment manufacturing. Since the beginning of the 21{sup st} century, Korea has been producing its nuclear personnel on its own and exchanging nuclear training instructors and trainees with other organizations in fields where specialized knowledge is needed. Furthermore, Korea is taking comprehensive nuclear HRD measures in response to the rising demand for human resources that result from ongoing construction of NPPs in

  19. HRD System and Experience in the Korean Nuclear Industry

    International Nuclear Information System (INIS)

    Kang, Byoungkook

    2012-01-01

    Korea began to nurture its nuclear energy pioneers in the 1950s when the government dispatched personnel in research and policy-making areas to foreign institutions. Then in 1959, KAERI was established and now plays a leading role in nuclear technology R and D. In addition, Korea's first research reactor, TRIGA Mark-II, was built and put into operation in 1962. This paved the way for advancements in operation and technical development of nuclear reactors. In turn, these accomplishments led to the birth of Korea's first commercial reactor, Kori Unit 1, in the 1970s, and HRD in the nuclear industry was put on the right track. However, the Korean nuclear industry remained heavily dependent on nuclear exporting countries such as the US, Canada, and France. Already confident in construction, Korea took the lead in building Kori Units 3 and 4 and Ulchin Units 1 and 2 in the 1980s, but the country was still in need of technological self-reliance. In order to achieve this, Korea proactively launched systematic HRD programs and dispatched nuclear professionals to overseas nuclear facilities to secure individuals competent in the areas of NPP operations, plant design, and major equipment manufacturing. Thanks to its diligent endeavors, Korea's nuclear entities established independent nuclear training institutes in the 1990s and began producing a large number of competent personnel. This allowed the country to ensure not only the best operation and maintenance engineers but also the essential nuclear technology required for plant design and equipment manufacturing. Since the beginning of the 21 st century, Korea has been producing its nuclear personnel on its own and exchanging nuclear training instructors and trainees with other organizations in fields where specialized knowledge is needed. Furthermore, Korea is taking comprehensive nuclear HRD measures in response to the rising demand for human resources that result from ongoing construction of NPPs in Korea and the UAE

  20. Industrial experience of irradiated nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    Delange, M.

    1981-01-01

    At the moment and during the next following years, France and La Hague plant particularly, own the greatest amount of industrial experience in the field of reprocessing, since this experience is referred to three types of reactors, either broadly spread all through the world (GCR and LWR) or ready to be greatly developed in the next future (FBR). Then, the description of processes and technologies used now in France, and the examination of the results obtained, on the production or on the security points of view, are a good approach of the actual industrial experience in the field of spent fuel reprocessing. (author)

  1. Corrosion problems in nuclear power industry

    International Nuclear Information System (INIS)

    Flis, J.; Janik-Czachor, M.

    1980-01-01

    Characteristics were given of steels and alloys used in the PWR nuclear power plants and of water used in the primary and secondary systems. Corrosion damages of materials and installations were described. It was indicated that the damages were due mainly to stress corrosion cracking. Main preventive methods were listed. (author)

  2. Separation chemistry for the nuclear industry

    International Nuclear Information System (INIS)

    Musikas, C.; Condamines, N.; Cuillerdier, C.

    1991-01-01

    A review of the actinide and Lanthanide extraction chemistry by N,N-dialkylamides and N,N'-tetraalkylamides is given. It includes the extraction equilibria of inorganic acids. The prospects of using these completely incinerable extractants in the nuclear fuels cycle is discussed

  3. Nuclear energy world Report 2012. September 2013 update

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2013-11-15

    At the end of 2012, 437 nuclear power plants were available for energy supply in 31 countries of the world. This means that the number was unchanged compared to the previous year's number on 31 December 2011. The aggregate gross power of the plants amounted to approx. 392,793 MWe, the aggregate net power, to 372,572 MWe. This indicates a slight increase of gross and net capacity (gross: 389,367 MWe, net: 369,371 MWe). Two units were commissioned in 2012; one unit in China and the Republic of Korea each. Two reactors in Canada resumed commercial operation after a long-term shutdown. The units have been layed-up since the mid 1990ies. Four units were shut down permanently in 2012; 2 units in the United Kingdom, and one unit in Canada and Spain each. The shut-downs in the United Kingdom and Canada have been planned on a long-term base. 68 nuclear generating units - 5 more than at the end of 2011 - were under construction in late 2012 in 14 countries with an aggregate gross power of approx. 70,933 MWe and net power of approx. 66,244 MWe. 9 new projects have been started in 2012 in three countries (China, United Arab Emirates, USA). Worldwide, some 110 new nuclear power plants are in the concrete project design, planning, and licensing phases; in some of these cases license applications have been submitted or contracts have already been signed. Some 100 further projects are planned. Net electricity generation in nuclear power plants worldwide in 2012 achieved a level of approx. 2,350.80 billion (109) kWh (2011: approx. 2,497.10 billion kWh). The main cause for the lower production have been the permanent shut-downs of almost all nuclear power plants in Japan since the natural disaster on 11 March 2011. Since the first generation of electricity in a nuclear power plant in the EBR-I fast breeder (USA) on December 20, 1951, cumulated net production has reached approx. 67,950 billion kWh, and operating experience has grown to some 15,050 reactor years. (orig.)

  4. An Updated Nuclear Equation of State for Neutron Stars and Supernova Simulations

    Science.gov (United States)

    Meixner, M. A.; Mathews, G. J.; Dalhed, H. E.; Lan, N. Q.

    2011-10-01

    We present an updated and improved Equation of State based upon the framework originally developed by Bowers & Wilson. The details of the EoS and improvements are described along with a description of how to access this EOS for numerical simulations. Among the improvements are an updated compressibility based upon recent measurements, the possibility of the formation of proton excess (Ye> 0.5) material and an improved treatment of the nuclear statistical equilibrium and the transition to pasta nuclei as the density approaches nuclear matter density. The possibility of a QCD chiral phase transition is also included at densities above nuclear matter density. We show comparisons of this EOS with the other two publicly available equations of state used in supernova collapse simulations. The advantages of the present EoS is that it is easily amenable to phenomenological parameterization to fit observed explosion properties and to accommodate new physical parameters.

  5. Updated Estimates of the Remaining Market Potential of the U.S. ESCO Industry

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Peter H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Carvallo Bodelon, Juan Pablo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Goldman, Charles A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Murphy, Sean [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Stuart, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

    2017-04-01

    The energy service company (ESCO) industry has a well-established track record of delivering energy and economic savings in the public and institutional buildings sector, primarily through the use of performance-based contracts. The ESCO industry often provides (or helps arrange) private sector financing to complete public infrastructure projects with little or no up-front cost to taxpayers. In 2014, total U.S. ESCO industry revenue was estimated at $5.3 billion. ESCOs expect total industry revenue to grow to $7.6 billion in 2017—a 13% annual growth rate from 2015-2017. Researchers at Lawrence Berkeley National Laboratory (LBNL) were asked by the U.S. Department of Energy Federal Energy Management Program (FEMP) to update and expand our estimates of the remaining market potential of the U.S. ESCO industry. We define remaining market potential as the aggregate amount of project investment by ESCOs that is technically possible based on the types of projects that ESCOS have historically implemented in the institutional, commercial, and industrial sectors using ESCO estimates of current market penetration in those sectors. In this analysis, we report U.S. ESCO industry remaining market potential under two scenarios: (1) a base case and (2) a case “unfettered” by market, bureaucratic, and regulatory barriers. We find that there is significant remaining market potential for the U.S. ESCO industry under both the base and unfettered cases. For the base case, we estimate a remaining market potential of $92-$201 billion ($2016). We estimate a remaining market potential of $190-$333 billion for the unfettered case. It is important to note, however, that there is considerable uncertainty surrounding the estimates for both the base and unfettered cases.

  6. Best practice asset management in the nuclear industry

    International Nuclear Information System (INIS)

    Maxey, Terry M.

    2004-01-01

    Pursuit of operational excellence is the goal of every nuclear plant operator. Implementation of Enterprise Asset Management(EAM) solutions in the nuclear industry has significantly contributed to record performance over the last decade in the areas of reliability and production, nuclear and personnel safety, and production cost. This presentation will outline the scope of best practice EAM implementation and highlight performance results achieved from EAM deployment. It will also explore areas of future opportunity in which EAM solutions will support an era of new nuclear plant construction in the United States

  7. The nuclear industry and the NPT: a Canadian view

    International Nuclear Information System (INIS)

    MacOwen, W.

    1987-01-01

    The effect of Canada's safeguards policy on Canadian industry and on the conduct of Canada's international nuclear trade is examined. When India exploded a nuclear device in 1974 Canada terminated all nuclear collaboration with India and also insisted that other countries renegotiated existing contracts to include more stringent safeguards. This damaged Canada's trading reputation and its position will have to be rebuilt. It is suggested that international agreement on some practicable and comprehensive rules for international trade in nuclear items should be pursued. (U.K.)

  8. Tackling the nuclear manpower shortage: industry, educators must work together

    International Nuclear Information System (INIS)

    Witzig, W.

    1981-01-01

    A 50% decline in graduate enrollment and an increase to 50% of foreign nationals among the nuclear engineering students since 1973 at Pennsylvania State University is typical of national trends, which have led to the closing of 13 undergraduate programs across the country. Penn State's proximity to Three Mile Island had less effect than its interactions with high schools and utilities in keeping the nuclear program as strong as it is. Penn State operates three separate career programs to interest high school students in a nuclear career. Institute of Nuclear Power Operations (INPO) educational assistance reflects industry interest, but more scholarships are needed to broaden student awareness

  9. JAIF's 23rd nuclear industry survey: strengthening industrial foundations under low economic growth

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    Each year since the beginning of nuclear development in Japan, Japan Atomic Industrial Forum has conducted the survey of the nuclear-related aspects in mining and manufacturing industries, electric utilities, trading firms, etc., regarding their expenditures, sales and personnel. The results of the 23rd survey for fiscal 1981 (April, 1981, to March, 1982,) are described. The salient points in the year, as compared with fiscal 1980, are as follows: (trend in expenditures) nuclear-related expenditures exceeded yen2 trillion, up 12 %; the operation and maintenance costs of electric utilities varied, but overall, up 25 %; the nuclear-related expenditures of mining and manufacturing industries were up 34 %; (trend in sales) the new record in mining and manufacturing industries - the sales topped yen1 trillion; the sales of reactor equipments rose by 59 %; the sales by mining and manufacturing industries to electric utilities up 42 %; the nuclear-related exports of mining and manufacturing industries grew by 13 %; the revenues and sales exceeded the expenditures in mining and manufacturing industries. (Mori, K.)

  10. The technical and industrial evolutions in the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Rougeau, J.P.; Guais, J.C.

    1989-01-01

    The fuel cycle industry is a vital part of nuclear energy generation. Producers in every step of this industry, from uranium to reprocessing are working to adapt their products and services both to the more and more competitive conditions of the market and to the utilities evoluting specific needs. For the next decade, the main trend is uranium economy and reduction of industrial costs. For the longer term, the difficult prevision of nuclear energy developments, in particular with new types of reactors necessitates a true capacity of adaptation both from the utilities and from the fuel cycle industry. Cogema has already demonstrated the ability to adapt its industrial capabilities and therefore can prepare confidently for the future challenges [fr

  11. Updates

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    2011 Chinese online shopping industry continues the momentum of rapid development in 2010, gradually narrowing the gap of the online shopping environment in the region, online shopping growth in some of the second and third tier provinces performed outstandingly. According to the iResearch ECPlus monitoring data,

  12. Addenda to the second update of the Fukushima Daiichi Nuclear Power Station accident. June 1 to August 31, 2011

    International Nuclear Information System (INIS)

    2011-01-01

    These addenda provide the figures and tables for helping readers to understand the article titled 'the second update of the Fukushima Daiichi Nuclear Power Station (NPS) accident' by SHIBUTANI Yu. These figures and tables are mainly referred from 'Additional Report of the Japanese Government to the IAEA - The Accident at the Tokyo Electric Power Company Inc. (TEPCO) Fukushima Daiichi NPS - September 2011, Nuclear Emergency Response Headquarters Government of Japan' and the website of Prime Minster of Japan and His Cabinet, Nuclear and Industrial Safety Agency (NISA), Ministry of Education, Culture, Sports, Science and Technology (MEXT), TEPCO and Japan Atomic Industrial Forum Inc. (JAIF). The contents of this addenda cover (1) summary of 28 learned lessons, (2) status of each unit of Fukushima Daiichi NPS, (3) alternative core cooling system, (4) spent fuel pool alternative cooling system, (5) outline of waste water storage and treatment system, (6) prevention of environmental release of radioactive materials and monitoring, (7) environmental effect caused by the accident, and (8) influence of Fukushima Daiichi accident on electricity supply in Japan. (author)

  13. Risk in Nuclear Industry. Liability for Nuclear Damage. Status of the Problem in the Russian Federation

    International Nuclear Information System (INIS)

    Kovalevich, Oleg M.; Gavrilov, Sergey D.; Voronov, Dmitry B.

    2001-01-01

    Russia is one of a few nuclear power states obtaining the whole number of nuclear fuel cycle (NFC) components - from mining of uranium and on-site electricity production, from NPP spent nuclear fuel processing and extracted fissile materials and radionuclides, which are available in industry, in medicine and in other relevant areas, to radioactive waste processing and disposal. For this reason it is very important to solve the problem of nuclear fuel cycle safety as it is a single system task with an adequate approach for all cycle components. The problem is that NFC facilities are technologically various and refer to different industries (mining, machinery engineering, power engineering, chemistry, etc.). Besides, the above facilities need the development of various scientific bases. The most NFC facilities is directly connected with peaceful use of nuclear energy and with military nuclear industry, as the defense orders stimulated the development of NFC. The specific attention to safety problems at the beginning of nuclear complex foundation adversely affected the state attitude towards the risk in nuclear industry, it has left the traces at present. In our paper we touch upon the problems of risk and the liability for nuclear damage for the third persons. The problems of nuclear damage compensation for nuclear facilities personnel and for the owners (operating organizations) are beyond our subject

  14. EPRI expert system activities for nuclear utility industry application

    International Nuclear Information System (INIS)

    Naser, J.A.

    1990-01-01

    This paper reports on expert systems which have reached a level of maturity where they offer considerable benefits for the nuclear utility industry. The ability of expert systems to enhance expertise makes them an important tool for the nuclear utility industry in the areas of engineering, operations and maintenance. Benefits of expert system applications include comprehensive and consistent reasoning, reduction of time required for activities, retention of human expertise and ability to utilize multiple experts knowledge for an activity. The Electric Power Research Institute (EPRI) has been performing four basic activities to help the nuclear industry take advantage of this expert system technology. The first is the development of expert system building tools which are tailored to nuclear utility industry applications. The second is the development of expert system applications. The third is work in developing a methodology for verification and validation of expert systems. The last is technology transfer activities to help the nuclear utility industry benefit from expert systems. The purpose of this paper is to describe the EPRI activities

  15. Industrial applications of radioisotopes: techniques and procedures of (NTIS) Nuclear Techniques Industrial Service

    International Nuclear Information System (INIS)

    Smith, S.W.; Kruger, J.

    1985-06-01

    Radioisotope handling procedures followed by personnel of the Nuclear Techniques Industrial Service (NTIS) during the conduction of investigations in industry are described. Possible radiological implications as a result of the various measuring techniques and different types of plants are discussed. Conditions under which permanent authorization has been granted for the use of radioisotopes are mentioned

  16. Developing industrial infrastructures to support a programme of nuclear power

    International Nuclear Information System (INIS)

    1988-01-01

    This Guidebook is intended to offer assistance in the many considerations and decisions involved in preparing the national industry for participation in a nuclear power programme. The heavy financial investment, the setting up of certain infrastructures many years ahead of plant construction, plus the high level of technology involved require early and systematic planning. A further purpose of this Guidebook is to serve particularly those decision makers and planners in the various governmental authorities, the technological institutions and in the industries likely to be involved in a nuclear project. These industries include the services of the national engineering resources, the domestic design and manufacturing groups as well as the civil construction companies. These will be responsible for plant erection, testing and commissioning and most of all for the establishment of a framework for quality assurance. All of these are the components of an essential infrastructure necessary to raise the standards of the national industry and to displace increasingly foreign suppliers to the extent possible. In addition, this Guidebook should help to show some of the implications, consequences and options involved in a nuclear power programme. It does not consider the basic decisions for going nuclear, nor does it review the choice of the technology or nuclear process selected for the programme. Instead, it limits itself to a consideration of the nuclear power plant and its essential cycle activities. Figs and tabs

  17. UPDATE: nuclear power program information and data, July-September 1981

    International Nuclear Information System (INIS)

    1981-01-01

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATA is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office

  18. Steel construction in the nuclear reprocessing industry

    International Nuclear Information System (INIS)

    Jordan, G.W.

    1990-01-01

    Over the past decade British Nuclear Fuels plc (BNFL) has pursued a large capital expenditure programme at Sellafield in Cumbria. This has used large quantities of structural steelwork. For example, Thorp plant for reprocessing spend AGR and LWR fuels, due for completion in 1992, has 20,000 tonnes. The design of these plants has been entrusted to BNFL Engineering based at Risley near Warrington, England. These safety-related structures are designed, as required by the Nuclear Installations Inspectorate, to withstand the effects of environmental hazards such as extremes of earthquake, wind, temperature, ice, snow, flooding, and lightning strikes. In some cases they may be subjected to impact loading from possible mishandling of lifted loads such as fuel transportation flasks. Design criteria for these structures have been developed by BNFL Engineering. Some examples are mentioned. (author)

  19. Testing of coatings for the nuclear industry

    International Nuclear Information System (INIS)

    Goldberg, G.

    1977-01-01

    Commercial scale nuclear power generating plant coatings must be able to withstand simultaneous exposure both to high humidity, and to cumulative radiation dosage, at elevated temperatures, for the design life of the plant. The coatings must be decontaminable by means other than by stripping, that is, actual physical removal, and must be of sufficient durability to withstand projected conditions of a loss of coolant accident. Tests to show that coatings are expected to do more than retard corrosion and erosion are described

  20. SKODA Nuclear Machinery - tradition and expertise in nuclear power industry

    International Nuclear Information System (INIS)

    Svitak, F.

    1997-01-01

    The SKODA Nuclear Machinery company is a major manufacturer of nuclear reactor assemblies and supplier of WWER type primary coolant circuits. In the past, the company was nearly a monopolistic manufacturer of WWER reactor assemblies supplied to the Central and East European countries (except the USSR) grouped in the former Council of Mutual Economic Assistance. Over the 1980-1993 period, 21 units of the WWER-440 type and 3 units of the WWER-1000 type were manufactured. The company keeps abreast of technological progress and has been switching to new manufacturing areas, such as compact storage racks for spent fuel pools, hermetic cable bushings, spent fuel storage and transport casks, and cooperation in the manufacture of neutron flux measuring channels. Technological services provided to nuclear power plants constitute another important field of the company's business. The company's combined expertise in Soviet and Western designed PWRs is a considerable asset. (P.A.)

  1. Italian nuclear power industry after nuclear power moratorium: Current state and future prospects

    International Nuclear Information System (INIS)

    Adinolfi, R.; Previti, G.

    1992-01-01

    Following Italy's nuclear power referendum results and their interpretation, all construction and operation activities in the field of nuclear power were suspended by a political decision with consequent heavy impacts on Italian industry. Nevertheless, a 'nuclear presidium' has been maintained, thanks to the fundamental contribution of activities abroad, succeeding in retaining national know-how and developing the new technologies called for the new generation of nuclear power plants equipped with intrinsic and/or passive reactor safety systems

  2. Reliability of structural materials in nuclear industry

    International Nuclear Information System (INIS)

    Pinard Legry, G.

    1996-01-01

    The reliability of nuclear installations is a fundamental point for the exploitation of nuclear energy. It requires an extensive knowledge of the behaviour of materials in the operating conditions and during the expected service life of the installations. In nuclear power plants multiple risks of failure can exist and are expressed by corrosion and deformation phenomena or by modification in the mechanical characteristics of materials. The knowledge of the evolution with time of a given material requires to take into account the data relative to the material itself, to its environment and to the physical conditions of this environment. The study of materials aging needs a more precise knowledge of the kinetics of phenomena at any scale and of their interactions, and a micro- or macro-modeling of their behaviour during long periods of time. This paper gives an overview of the aging phenomena that occur in the structural materials involved in PWR and fast neutron reactors: thermal aging, generalized corrosion, corrosion under constraint, intergranular corrosion, crack growth under loading, wear, irradiation etc.. (J.S.)

  3. Trend analysis in the nuclear maintenance industry

    International Nuclear Information System (INIS)

    Ruemeli, W.A.

    1986-01-01

    The maintenance of nuclear facilities is a demanding, ongoing activity which requires the same level of quality as new construction. Heretofore, many owners and contractors have relied on ''gut feel'' to determine whether maintenance quality was improving or not. However, trend analysis now is becoming a key factor in monitoring plant activities to ensure quality. Literature abounds with descriptions of computerized systems for collecting and sorting data. Even the Nuclear Regulatory Commission (NRC) has concurred, with its endorsement of trend analysis of construction indicators in NUREG 1055 (Ford Amendment Study). Stearns Catalytic has developed a unique system of tend analyses for nuclear plant activities. Aside from its intended purpose of determining the quality trends in maintenance activities, the program also supplies substantial quantitative data for control and management of the quality activities. Trend analysis is a time series analysis of a set of observations arranged in chronological order. The important aspect is the time basis, specifically the analysis of quality indicators over successive periods of time. Many program elements, including surveillances, nonconformances, inspections, and audits, are designed to look at quality indications

  4. Nuclear gauge application in road industry

    Science.gov (United States)

    Azmi Ismail, Mohd

    2017-11-01

    Soil compaction is essential in road construction. The evaluation of the degree of compaction relies on the knowledge of density and moisture of the compacted layers is very important to the performance of the pavement structure. Among the various tests used for making these determinations, the sand replacement density test and the moisture content determination by oven drying are perhaps the most widely used. However, these methods are not only time consuming and need wearisome procedures to obtain the results but also destructive and the number of measurements that can be taken at any time is limited. The test can on be fed back to the construction site the next day. To solve these problems, a nuclear technique has been introduced as a quicker and easier way of measuring the density and moisture of construction materials. Nuclear moisture density gauges have been used for many years in pavement construction as a method of non-destructive density testing The technique which can determine both wet density and moisture content offers an in situ method for construction control at the work site. The simplicity, the speed, and non-destructive nature offer a great advantage for quality control. This paper provides an overview of nuclear gauge application in road construction and presents a case study of monitoring compaction status of in Sedenak - Skudai, Johor rehabilitation projects.

  5. Actual state of the nuclear industry in Japan and trends of nuclear development in the world

    International Nuclear Information System (INIS)

    Anon.

    1999-01-01

    Nuclear industry in Japan established a fixed foundation as a large complex system industry by elapsing about forty years since beginning of its development at top of 1930s. For Japan with little energy resources, nuclear power generation is one of essential choices because not only of keeping energy security but also of response to global warming problem such as global warming protection. Then, in order to intend to promote sound development of the nuclear industry in Japan, further upgrading of technology aimed at maintenance and improvement of safety and formation of understanding and agreement of the peoples must be established. Here was introduced a report on actual state of the nuclear industry in Japan in 1997 fiscal year prepared on February, 1999 by the Japan Atomic Industrial Forum. (G.K.)

  6. The safety of a nuclear industry in South Australia

    International Nuclear Information System (INIS)

    Higson, D.J.

    2016-01-01

    On 19 March 2015, the South Australian Government established a Royal Commission to consider and analyse the potential of South Australia to further participate in the nuclear fuel cycle, whether through the expansion of the current level of exploration, extraction and milling of uranium (the only parts of the nuclear power industry that are currently allowed in Australia) or by undertaking the conversion and enrichment of materials for the nuclear fuel cycle, the generation of electricity from nuclear fuels and/or the management, storage and disposal of nuclear wastes. This provides a timely opportunity to review the performance of the nuclear industry throughout the world, particularly in the safety of electricity generation and waste management, showing that - despite misconceptions about radiological risks and the significance of the accidents that have occurred - the record of this industry is exceptionally good. The Federal and South Australian State governments both have the policy that uranium mining is acceptable providing it is properly regulated. The success of this policy suggests that it is exactly the policy that should be adopted for all other parts of the nuclear fuel cycle, including the generation of electricity.

  7. Deregulation and internationalisation - impact on the Swedish nuclear industry

    International Nuclear Information System (INIS)

    Haukeland, Sverre R.

    2010-01-01

    The deregulation of the Swedish electricity market in 1996 was well known in advance, and the nuclear power plants in Sweden, as well as their main suppliers, made early preparations for a this new situation. In a study - performed by the author at Malardalen University in Sweden - it is concluded that the electricity industry, including the nuclear power plants, was fundamentally transformed in conjunction with market liberalisation. Two large foreign companies, E-on and Fortum, entered the Swedish market and became part-owners of the nuclear plants. After deregulation, the electricity market in Sweden is dominated by these two companies and the large national company Vattenfall. Similarly, Vattenfall has recently grown into an international energy company, acquiring generation capacity in Northern Europe outside of Sweden, including nuclear power plants in Germany. Restructuring of the nuclear industry on the supplier side started in the 1980's, when the Swedish company ASEA and BBC of Switzerland merged to become ABB. Several years later the Swedish nuclear plant supplier ABB-Atom became part of Westinghouse Electric Company, today owned by Toshiba. The Swedish experience thus confirms an international trend of mergers and consolidation in the nuclear industry. (authors)

  8. Establishing a Nuclear Industrial Structure The Spanish Case

    International Nuclear Information System (INIS)

    Palacios, L.

    1989-01-01

    Nuclear industry is nationalistic all over the world. This fact is at first glance rather surprising, since one would guess that the localization drive should start with segments of industry of a less sophisticated nature. The reason probably lies on the fact that nuclear disciplines are new and can be conceived as an easier task for planners than other techniques where industrial relationships are already established. The process of increasing domestic content has important implications and crucial decisions have to be made. A general process of technology transfer has to be assured, investments have to be made in new plant and a sizable number of engineers and technicians has to be trained. Technology transfer in the nuclear field seems to be the practical extent dictated by the availability of raw materials and the economy of scale for some components. Table V lists the content achieved in specific classes of equipment. The process has been successful and has enabled Spanish Industry to be present in the world market. Countries embarking in similar programs have expressed interest in the Spanish process as representative of medium development industry that, by determination and serious work, has achieved an advanced status, overcoming deficiencies that are not normally encountered in more developed societies. Spanish Industry is of course ready to share its experience with interested parties, thus contributing to orient local industries by advising them on the successes achieved as an example to follow, and the mistakes made, to prevent occurrence

  9. The nuclear power industry in the Asia-Pacific region

    International Nuclear Information System (INIS)

    Lester, R.K.

    1984-01-01

    The development of the nuclear reactor industry in the Pacific Basin began in the United States and Canada and spread to Japan and, more recently, to South Korea and Taiwan. The American and Canadian industries face serious economic and political difficulties; indeed, their current plight is so severe that their survival no longer seems assured. Because of the key regional role played up to now by the North American industries, and by the U.S. industry in particular, the realization of this scenario would have important repercussions for nuclear trade and investment throughout the region. In the longer run some basic structural changes would seem likely, with the focal point of industrial strength and technological leadership in the region shifting to Northeast Asia, and to Japan in particular. Already there is evidence of this shift. But the prospect of a smooth, gradual transition toward a new regional industrial structure centered on Japan may be misleading. What is missing from this picture is a full measure of the extent to which nuclear industrial development elsewhere in the region is positively correlated with the trend in the United States. (author)

  10. Update on Canada's nuclear fuel waste management program

    International Nuclear Information System (INIS)

    Allan, C.J.

    1992-09-01

    The Canadian Nuclear Fuel Waste Management Program (CNFWMP) was launched in 1978 as a joint initiative by the governments of Canada and Ontario. Under the program, AECL has been developing and assessing a generic concept to dispose of nuclear fuel waste in plutonic rock of the Canadian Shield. The disposal concept has been referred for review under the Environmental Assessment and Review Process. AECL will submit an Environmental Impact Statement (EIS) to an Environmental Assessment Panel, which was appointed in late 1989. Hearings will be held in areas that have a particular interest in the concept and its application. At the end of the review, the Panel will make recommendations as to the acceptability of the concept and the course of future action. The federal government will decide on the next steps to be taken. In the spring of 1990 public open houses were held to tell prospective participants how to enter the process. Sessions designed to assist the Panel in determining the scope of the EIS took place in the autumn of 1990. In June 1991 the Panel issued for comment a set of draft guidelines for the EIS. More than 30 groups and individuals submitted comments. The final guidelines were issued in March 1992, and AECL expects to submit its EIS to the Panel in 1993. If the concept review is completed by 1995 and if the concept is approved, disposal could begin some time after 2025. (L.L.) (12 refs.)

  11. Nuclear Medicine in Diagnosis of Prosthetic Valve Endocarditis: An Update

    Science.gov (United States)

    Musso, Maria; Petrosillo, Nicola

    2015-01-01

    Over the past decades cardiovascular disease management has been substantially improved by the increasing introduction of medical devices as prosthetic valves. The yearly rate of infective endocarditis (IE) in patient with a prosthetic valve is approximately 3 cases per 1,000 patients. The fatality rate of prosthetic valve endocarditis (PVE) remains stable over the years, in part due to the aging of the population. The diagnostic value of echocardiography in diagnosis is operator-dependent and its sensitivity can decrease in presence of intracardiac devices and valvular prosthesis. The modified Duke criteria are considered the gold standard for diagnosing IE; their sensibility is 80%, but in clinical practice their diagnostic accuracy in PVE is lower, resulting inconclusively in nearly 30% of cases. In the last years, these new imaging modalities have gained an increasing attention because they make it possible to diagnose an IE earlier than the structural alterations occurring. Several studies have been conducted in order to assess the diagnostic accuracy of various nuclear medicine techniques in diagnosis of PVE. We performed a review of the literature to assess the available evidence on the role of nuclear medicine techniques in the diagnosis of PVE. PMID:25695043

  12. Update of Nuclear Waste Policy Act transportation activities

    International Nuclear Information System (INIS)

    Callaghan, E.F.

    1987-01-01

    As directed by the Nuclear Waste Policy Act of 1982 (NWPA), the Department of Energy (DOE) is developing a nationwide system for transporting spent nuclear fuel and high-level radioactive waste from commercial power plants to deep geologic repositories for disposal. Plans for the transportation system will consider the following factors: the President's 1985 decision to co-locate some defense high-level waste with commercial waste in a repository, the NWPA requirement that the private sector be used to the fullest extent possible in developing and operating the system, and the possible approval by Congress of the DOE's proposal for a Monitored Retrievable Storage (MRS) facility, submitted in March 1987. (The MRS, if approved, would provide for the consolidation, packaging, and perhaps the temporary storage of spent fuel from reactors.) The ''Transportation Business Plan'', published in January 1986, reflects these considerations. The transportation system, when operational, will consist of two elements: (1) the cask system, which includes the transportation casks, the vehicular conveyances, tie-downs, and associated equipment for handling the casks; and (2) the transportation support system which is comprised of facilities, equipment, and services to support waste transportation. Development of the transportation system incorporates the following work elements: operational planning, support systems development, cash system development, systems analysis, and institutional activities. This paper focusses on the technical aspects of the system

  13. Risk management of knowledge loss in nuclear industry organizations

    International Nuclear Information System (INIS)

    2006-07-01

    Maintaining nuclear competencies in the nuclear industry and nuclear regulatory authorities will be one of the most critical challenges in the near future. As many nuclear experts around the world are retiring, they are taking with them a substantial amount of knowledge and corporate memory. The loss of such employees who hold knowledge critical to either operations or safety poses a clear internal threat to the safe and reliable operation of nuclear facilities. This publication is intended for senior and middle level managers of nuclear industry operating organizations and provides practical information on knowledge loss risk management. The information provided in this it is based upon the actual experiences of Member State operating organizations and is intended to increase awareness of the need to: develop a strategic approach and action plans to address the potential loss of critical knowledge and skills; provide processes and in conducting risk assessments to determine the potential for loss of critical knowledge caused by the loss of experienced workers; and enable nuclear organizations to utilize this knowledge to improve the skill and competence of new and existing workers In 2004, the IAEA published a report entitled The Nuclear Power Industry's Ageing Workforce: Transfer of Knowledge to the Next Generation (IAEA-TECDOC-1399). That report highlighted some of the knowledge management issues in Member States resulting from the large number of retiring nuclear power plant personnel who had been involved with the commissioning and initial operation of nuclear power plants. This publication complements that report by providing a practical methodology on knowledge loss risk management as one element of an overall strategic approach to workforce management which includes work force planning, recruitment, training, leadership development and knowledge retention

  14. Quantified risk assessment - a nuclear industry viewpoint

    International Nuclear Information System (INIS)

    Thomson, J.R.

    1994-01-01

    This paper presents a brief summary of the methodology used for the assessment of risk arising from fuel handling and dismantling operations in advanced gas-cooled reactor power stations. The difficulties with and problems arising from such risk assessments are discussed. In particular, difficulties arise from (i) the onerous risk criteria that nuclear plants are expected to satisfy, (ii) the necessary complexity of the plant, (iii) the conflicting requirements for the fault consequence assessments to be bounding but not grossly pessimistic, and (iv) areas of fault frequency assessment which contain possibly subjective considerations such as software and common mode failure. (author)

  15. Applications of polyolefins in the nuclear industry

    International Nuclear Information System (INIS)

    Erambert, M.; Goavec, P.

    1984-01-01

    The environment of a nuclear power plant often imposes impossible conditions on wires and cables. Cable manufacturers make great use of polymers, and the properties of the latter are limited in all the fields imposed: radiation, ageing, fire, corrosion. ACOME presents a cross-linked fireproof polyolefin, the properties of which have been verified in long-term tests: with very different ageing temperatures and times, very variable dose rates and very long simultaneous cycles. After all the tests proposed, the mechanical characteristics still made winding on cores possible. The electrical characteristics were very good, and fireproofing was unaffected [fr

  16. Gas processing in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Kovach, J.L.

    1995-02-01

    This article is a brief overview of code requirements in the nuclear air cleaning arena. NRC standards, which employ the various ASME codes, are noted. It is also noted that DOE facilities do not fall under the purview of the NRC and that DOE facilities (especially fuel cycle facilities) typically have broader gas processing activities than for power reactors. The typical differences between DOE facilities` and power reactor facilities` gas processing needs are listed, as are DOE facility components not covered by the ASME AG-1 code.

  17. Intelligent vision in the nuclear industry

    International Nuclear Information System (INIS)

    Luna, F.

    1983-01-01

    General Electric has developed an intelligent microprocessor-based machine vision system that is character font independent and is capable of reading characters that may be variably defined as a result of dirt, misalignment, or scratches incurred during processing. This system, the Alphavision System, was developed at the GE fuel fabrication facility in Wilmington, North Carolina, and has been used to read serial numbers on fuel rods. This paper describes the system and considerations for its use and suggests some potential applications in nuclear materials item accountability

  18. Robots in the nuclear industry: conference report

    International Nuclear Information System (INIS)

    Kochan, Anna.

    1992-01-01

    Current robotic technology is severely challenged by the conditions which nuclear environments present. In such applications, reliability demands are stringent; the environment is highly unstructured; and the ionizing radiation field is extremely hazardous to equipment. But an international conference, held recently in Marseille, indicated clearly that there is no shortage of robotic solutions adapted to these special needs. Organized by the Institut International de Robotique et d'Intelligence Artificelle in Marseille, the conference focused on telerobotics in hostile environments, including sessions on Perception of Environment; Man/machine Interface; and Technologies and Components. (Author)

  19. Fostering of Innovative Talents Based on Disciplinary Construction: HRD Strategy of Chinese Nuclear Power Industry

    International Nuclear Information System (INIS)

    Ye Yuanwei

    2014-01-01

    Workforce challenge to nuclear power industry: • We are facing the aging workforce and talent loss since the tough time of nuclear power industry. • Professional workforce fostering in nuclear power industry always needs a long period of time. • Professional workforce fostering in nuclear power industry is a systematic and interdisciplinary work. Talents fostering in nuclear power industry: Major measures → national overall planning; engineering practice; knowledge management; disciplinary construction; cooperation and communication

  20. The nuclear industry and communication: a personal view

    International Nuclear Information System (INIS)

    Morvan, P.

    1989-01-01

    The nuclear industry should not be hesitant in proclaiming its belief that nuclear energy is justifiable politically, economically and ecologically. Some of the basic principles of company communication with the public as they apply to the nuclear industry, are examined. Security is of the utmost importance at all nuclear sites. The commitment to security must be based on mutual confidence between specialists and the public particularly those living in the vicinity of a nuclear plant. A precise scale by which nuclear incidents can be measured must be defined, indicating their degree of seriousness and consequently what should be done. The public must be immediately informed about nuclear accidents by specialists as unequivocally as possible. It is essential that those who work at nuclear plants be confident and proud of their jobs and the company that employs them. It is impossible to establish and maintain good public relations without a permanent flow of information within the company at all levels. The economic factors, such as increased employment opportunities, must not be overlooked either. (author)

  1. Big-Bang nucleosynthesis with updated nuclear data

    Energy Technology Data Exchange (ETDEWEB)

    Coc, Alain [Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse (CSNSM), CNRS/IN2P3, Universite Paris Sud 11, UMR 8609, Batiment 104, F-91405 Orsay Campus (France); Vangioni, Elisabeth, E-mail: Alain.Coc@csnsm.in2p3.f, E-mail: vangioni@iap.f [Institut d' Astrophysique de Paris, UMR-7095 du CNRS, Universite Pierre et Marie Curie, 98 bis bd Arago, 75014 Paris (France)

    2010-01-01

    Primordial nucleosynthesis is one of the three evidences for the Big-Bang model together with the expansion of the Universe and the Cosmic Microwave Background. There is a good global agreement over a range of nine orders of magnitude between abundances of {sup 4}He, D, {sup 3}He and {sup 7}Li deduced from observations and calculated primordial nucleosynthesis. This comparison was used to determine the baryonic density of the Universe. For this purpose, it is now superseded by the analysis of the Cosmic Microwave Background (CMB) radiation anisotropies. Big-Bang nucleosynthesis remains, nevertheless, a valuable tool to probe the physics of the early Universe. However, the yet unexplained, discrepancy between the calculated and observed lithium primordial abundances, has not been reduced, neither by recent nuclear physics experiments, nor by new observations.

  2. Human factors aspects of advanced instrumentation in the nuclear industry

    International Nuclear Information System (INIS)

    Carter, R.J.

    1989-01-01

    An important consideration in regards to the use of advanced instrumentation in the nuclear industry is the interface between the instrumentation system and the human. A survey, oriented towards identifying the human factors aspects of digital instrumentation, was conducted at a number of United States (US) and Canadian nuclear vendors and utilities. Human factors issues, subsumed under the categories of computer-generated displays, controls, organizational support, training, and related topics were identified. 20 refs., 2 tabs

  3. A. The nuclear power industry in U.S.A

    International Nuclear Information System (INIS)

    1976-01-01

    The nuclear industry in the USA at present is on the defensive - opposition to nuclear power is growing, costs are escalating, new orders are outweighed by cancellations and spent fuel is accumulating as no commercial fuel reprocessing plants are operating. This latter is probably the greatest problem facing the industry and the lack of a decision on the use of mixed oxide fuel is a complicating factor. Other controversial subjects are the safety of power plants, the long term disposal of high level waste, the supply of uranium, enrichment facilities and safeguards. However nuclear power is already supplying 10% of the nations electricity and it may be that some of the current problems stem directly from the rapid growth of the industry. Thus, the current slowing of the growth rate could be advantageous. The industry has an enviable safety record and referenda held in a number of states on various nuclear issues have all suggested that in spite of the well-publicised problems, the public does not want nuclear power to be abandoned or too seriously constrained

  4. Development of the production of special steels for nuclear industries

    International Nuclear Information System (INIS)

    Vieillard-Baron, B.

    1977-01-01

    The development of electro-nuclear industries has a powerful impact on the production of special steels, although the quantity of material applied to the non-conventional parts of nuclear power plants is quite small as compared to the total production requirements in this industrial field. Evolution bears on the product research, development and testing methods, on the technical and marketing services - in particular the establishment of quality control teams and assurance manuals - and the implementation of high performance production equipments. Manufacturing must however take place under normal work load and productivity conditions of production tools, and thus ensure a satisfactory profitability on investments entailed [fr

  5. The chemical industry - a danger to nuclear power plants

    International Nuclear Information System (INIS)

    Voigtsberger, P.

    1976-01-01

    Nuclear power stations could contaminate large areas with radioactivity when destroyed by strong external influences. In Germany, authorities try to cope with this danger firstly by making certain demands on the strength of the reactor shell and secondly by imposing strict safety regulations on dangerous industrial plants in the surroundings of the reactor. In the case of chemical industry, this means: If a chemical plant and a nuclear reactor lie closely together, special stress is given to explosion pretection measures in the form of primary explosion protection, e.g. strong sealing of inflammable gases and liquids handled in the immediate neighbourhood of the reactor. (orig.) [de

  6. Role of high technology in the nuclear industry

    International Nuclear Information System (INIS)

    Cain, D.G.

    1986-01-01

    A discussion of high technology identifies the characteristics which distinguish it from conventional technologies, and the impact high technology will have in the nuclear power industry in the near future. The basic theme is that high technology is an ensemble of competing technological developments that shifts with time and technological innovation. The attributes which current distinguish high technology are compactness, plasticity, convergence, and intelligence. These high technology attributes are presented as a prelude to some examples of high technology developments which are just beginning to penetrate the nuclear industry. Concluding remarks address some of the challenges which must be faced in order to assure that high technology is successfully adapted and used

  7. The Chernobyl Nuclear Power Plant accident: ecotoxicological update

    Science.gov (United States)

    Eisler, R.; Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John

    2003-01-01

    The accident at the Chernobyl, Ukraine, nuclear reactor on 26 April 1986 released large amounts of radiocesium and other radionuclides into the environment, contaminating much of the northern hemisphere, especially Europe. In the vicinity of Chernobyl, at least 30 people died, more than 115,000 others were evacuated, and consumption of milk and other foods was banned because of radiocontamination. At least 14,000 human cancer deaths are expected in Russia, Belarus, and the Ukraine as a direct result of Chernobyl. The most sensitive local ecosystems, as judged by survival, were the soil fauna, pine forest communities, and certain populations of rodents. Elsewhere, fallout from Chernobyl significantly contaminated freshwater and terrestrial ecosystems and flesh and milk of domestic livestock; in many cases, radionuclide concentrations in biological samples exceeded current radiation protection guidelines. Reindeer (Rangifer tarandus) in Scandinavia were among the most seriously afflicted by Chernobyl fallout, probably because their main food during winter (lichens) is an efficient absorber of airborne particles containing radiocesium. Some reindeer calves contaminated with 137Cs from Chernobyl showed 137Cs-dependent decreases in survival and increases in frequency of chromosomal aberrations. Although radiation levels in the biosphere are declining with time, latent effects of initial exposure--including an increased frequency of thyroid and other cancers--are now measurable. The full effect of the Chernobyl nuclear reactor accident on natural resources will probably not be known for at least several decades because of gaps in data on long-term genetic and reproductive effects and on radiocesium cycling and toxicokinetics.

  8. Managing nuclear knowledge and expertise - An industry perspective

    International Nuclear Information System (INIS)

    Garderet, Ph.

    2002-01-01

    Full text: The industrial demand for expertise and qualified personnel in nuclear sciences and technologies will obviously continue to be strong during the next decades: in all cases, a high level of competence will necessarily continue to be required to maintain high performances in operating current nuclear facilities (up to decommissioning) ; moreover, additional skills are to be engaged to conceive new projects or to propose new services for new industrial customers. The industrial needs evidently show some quantitative or qualitative specificities according to the strategy each country has adopted in the past or is adopting now for the use of nuclear power or other nuclear technologies. But the general trends concerning the access to qualified knowledge in nuclear sciences and technologies are globally the same, so concrete actions have to be taken as soon as possible to anticipate difficult situations and overcome the problems. In the countries where nuclear industry has been strongly developed during the past decades (for example France) the problem chiefly concerns the relative ageing of the human workforce and the ability to maintain the accumulated knowledge and replace technical expertise at the very moment when all the technological companies show a significant decline in the number of entrants in all the domain of science and engineering. The problem is reinforced by the fact that (strictly for the same reasons) this phenomenon is observed concurrently within the research laboratories, among the staff of the safety authorities and, more generally, in all the offices engaged in the decision making process about nuclear affairs. Part of the solution to these serious problems stands in the human resources policy that the main nuclear industries have to achieve : internal training through enterprise universities, auto-formation, tutorage of young scientists by seniors, programs of knowledge preservation, international mobility when possible. But more

  9. Building public confidence in the world's nuclear industry

    International Nuclear Information System (INIS)

    Duncan, C.D.

    1996-01-01

    Public confidence in the nuclear industry requires two things, which are trust and understanding. Trust is an emotional response based upon an instinctive reaction. Understanding, on the other hand, is an intellectual response based upon facts. To gain public confidence, both of these levels must be communicated and proactive strategies must be implemented to do this. To achieve this objective will require confidence and courage in communication programs. Each company operating in the nuclear sector must be proactive in building its individual reputation and must not retreat from controversy. Similarly, each industry body must continue the Herculean task of building understanding. The nuclear industry has powerful arguments. ICI, BP or Ford did not achieve their licences to operate by keeping their heads down, they achieved their current market positions by building a positive corporate reputation within their respective industrial contexts over many decades. In order to achieve a similar position for the nuclear industry and the companies, their examples must be followed. If it is continued to 'keep the heads down' in the trenches, public opinion will surely bury within it. (G.K.)

  10. A comparative analysis of managing radioactive waste in the Canadian nuclear and non-nuclear industries

    Energy Technology Data Exchange (ETDEWEB)

    Batters, S.; Benovich, I.; Gerchikov, M. [AMEC NSS Ltd., Toronto, ON (Canada)

    2011-07-01

    Management of radioactive waste in nuclear industries in Canada is tightly regulated. The regulated nuclear industries include nuclear power generation, uranium mining and milling, nuclear medicine, radiation research and education and industrial users of nuclear material (e.g. radiography, thickness gauges, etc). In contrast, management of Naturally Occurring Radioactive Material (NORM) waste is not regulated by the Canadian Nuclear Safety Commission (CNSC), with the exception of transport above specified concentrations. Although these are radioactive materials that have always been present in various concentrations in the environment and in the tissues of every living animal, including humans, the hazards of similar quantities of NORM radionuclides are identical to those of the same or other radionuclides from regulated industries. The concentration of NORM in most natural substances is so low that the associated risk is generally regarded as negligible, however higher concentrations may arise as the result of industrial operations such as: oil and gas production, mineral extraction and processing (e.g. phosphate fertilizer production), metal recycling, thermal electric power generation, water treatment facilities. Health Canada has published the Canadian Guidelines for the Management of Naturally Occurring Radioactive Materials (NORM). This paper presents a comparative analysis of the requirements for management of radioactive waste in the regulated nuclear industries and of the guidelines for management of NORM waste. (author)

  11. A comparative analysis of managing radioactive waste in the Canadian nuclear and non-nuclear industries

    International Nuclear Information System (INIS)

    Batters, S.; Benovich, I.; Gerchikov, M.

    2011-01-01

    Management of radioactive waste in nuclear industries in Canada is tightly regulated. The regulated nuclear industries include nuclear power generation, uranium mining and milling, nuclear medicine, radiation research and education and industrial users of nuclear material (e.g. radiography, thickness gauges, etc). In contrast, management of Naturally Occurring Radioactive Material (NORM) waste is not regulated by the Canadian Nuclear Safety Commission (CNSC), with the exception of transport above specified concentrations. Although these are radioactive materials that have always been present in various concentrations in the environment and in the tissues of every living animal, including humans, the hazards of similar quantities of NORM radionuclides are identical to those of the same or other radionuclides from regulated industries. The concentration of NORM in most natural substances is so low that the associated risk is generally regarded as negligible, however higher concentrations may arise as the result of industrial operations such as: oil and gas production, mineral extraction and processing (e.g. phosphate fertilizer production), metal recycling, thermal electric power generation, water treatment facilities. Health Canada has published the Canadian Guidelines for the Management of Naturally Occurring Radioactive Materials (NORM). This paper presents a comparative analysis of the requirements for management of radioactive waste in the regulated nuclear industries and of the guidelines for management of NORM waste. (author)

  12. Nuclear energy industry in Russia promoting global strategy

    International Nuclear Information System (INIS)

    Kobayashi, Masaharu

    2001-01-01

    Since former USSR disintegrated to birth new Russia on December, 1991, it already passed ten years. As Russian economic hardship affected its nuclear energy development, No.1 reactor of the Rostov nuclear power station (VVER-1000) established its full power operation on September, 2001 after passing eight years of pausing period as a Russian nuclear power station, at dull development of nuclear energy in the world. When beginning of its commercial operation, scale of nuclear power generation under operation in Russia will reach to the fourth one in the world by getting over the one in Germany. Russia also begins international business on reprocessing of spent fuel and intermittent storage. And, Russia positively develops export business of concentrated uranium and nuclear fuel, too. Furthermore, Russia shows some positive initiatives on export of nuclear power station to China, Iran and India, and development on advanced nuclear reactor and nuclear fuel cycle forecast to future. Here was introduced on international developmental development of nuclear energy industry activated recently at delayed time for this ten years. (G.K.)

  13. Nuclear fuel industry in USSR, (1)

    International Nuclear Information System (INIS)

    Kurasaka, Makoto; Kinoshita, Michio.

    1987-01-01

    The data on the atomic energy industries in East European countries have been published variously so far, but their summaries are very few. In order to know about the atomic energy industries in the world, it is necessary to know about those in East European countries, particularly in USSR. The exploration of uranium ore in USSR was begun in 1940s, and the various types of uranium ore have been found. Simultaneously with the extraction of uranium, molybdenum, iron and rare earth can be extracted, and also phosphatic fertilizer can be produced, therefore, even the uranium deposits of low grade are profitable. The accurate quantity of uranium reserves in USSR is unknown, but the confirmed resources seem to be 100,000 - 160,000 tons. The yearly production of uranium in USSR was about 4,500 tons in mid 1970s, and the cumulative production since 1908 was about 135,000 tons. The main uranium production facilities in USSR are in six districts, but there are many other places of medium and small production. For the exploration, the gamma ray measuring instruments carried by walkers, automobiles and aircrafts are used as a rule. As the mining methods, pit mining, open air mining and leaching in the site are carried out. In the uranium deposits in USSR, several hundreds km of mining is carried out on the yearly average. (Kako, I.)

  14. Overview of the Russian nuclear industry; Le panorama nucleaire russe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-02-15

    In 2004, President Poutine decided to replace the atomic energy ministry (Minatom) by the federal atomic energy agency (Rosatom). Several projects were launched during the next two years which aimed at bringing back Russia to the fore front of the world leaders of nuclear energy use and nuclear technology export. In 2007, Rosatom agency was changed to a public holding company and a new company, named Atomenergoprom, was created which gathers all civil nuclear companies (AtomEnergoMash for the exploitation of power plants, Technabsexport (Tenex) specialized in enrichment or Atomstryexport in charge of export activities). Thus, Rosatom is at the head of all civilian and military nuclear companies, of all research centers, and of all nuclear and radiological safety facilities. In 2006, Russian nuclear power plants supplied 15.8% of the whole power consumption. Russia wishes to develop its nuclear program with the construction of new reactors in order to reach a nuclear electricity share of 25% from now to 2020. This paper presents first the 2007 institutional reform of the Russian atomic sector, and the three sectorial federal programmes: 1 - development of the nuclear energy industrial complex for the 2007-2010 era and up to 2015 (future power plants, nuclear fuel centers and reactor prototypes), 2 - nuclear safety and radioprotection for the 2008-2015 era (waste management, remedial actions, radiation protection), 3 - military program (confidential). Then, the paper presents: the international actions (export of Russian technology, cooperation agreements, non-proliferation), the situation of the existing nuclear park (reactors in operation, stopped, under construction and in project), the fuel cycle activities (production of natural uranium, enrichment, fuel fabrication, spent fuel storage, reprocessing, waste management), the nuclear R and D in Russia, and the nuclear safety authority. (J.S.)

  15. 75 FR 44072 - Export and Import of Nuclear Equipment and Material; Updates and Clarifications

    Science.gov (United States)

    2010-07-28

    ... does not feel that placing an additional regulatory compliance burden on the public is warranted at this time. The NRC believes that any questions the public may have regarding compliance with exclusion... globalization of the nuclear industry, U.S. nuclear companies are outsourcing more and more items, including...

  16. Canada's nuclear industry - a leader in the global market

    International Nuclear Information System (INIS)

    Saint-Pierre, G.

    1994-01-01

    The successes of the Canadian nuclear industry at home and abroad are recounted and extolled in this address. It is argued that the industry must become more global in order to compete more effectively in the export market. This means not only setting up operating bases (rather than mere marketing offices) abroad, but also employing nationals of prospective overseas purchasing countries in the headquarters of Canadian companies. Partnership with one or more Asian country may be the key to success

  17. Organizing the Canadian nuclear industry to meet the challenge

    International Nuclear Information System (INIS)

    Lortie, Pierre.

    1983-06-01

    The CANDU reactor is struggling for a share of the dwindling reactor market against formidable and well-established competition. The Canadian nuclear industry has historically depended upon two crown corporations, Atomic Energy of Canada Ltd. and Ontario Hydro, which have taken the lead in designing and engineering the reactor. Crown corporations are not notably successful in marketing, however, and the time has come for the industry to organize itself in preparation for an aggressive export drive

  18. The adventure of nuclear energy: a scientifical and industrial history

    International Nuclear Information System (INIS)

    Reuss, P.

    2007-01-01

    The nuclear energy history is one of the most exciting scientifical and industrial adventure. In France, in a few decades, nuclear energy has become the main energy source for power generation. The aim of this book is to present the stakes of this challenge, to better outline the difficulties that have been encountered all along its development in order to better understand the complexness of such a development. After an overview of the successive advances of atomic and nuclear physics since more than a century, the book describes the genesis of nuclear energy, its industrial developments and its still wide open perspectives. The conclusions makes a status of the advantages and risks linked with this energy source. The book contains also the testimonies of two French nuclear actors: P. Benoist and S. David. The forewords by H. Langevin, daughter of F. and I. Joliot-Curie, stresses on the past and future role of nuclear energy in the live synergy between research and industry. (J.S.)

  19. Women in the new era of nuclear power industry

    International Nuclear Information System (INIS)

    Junko Ogawa

    2009-01-01

    In modern society, it is important that men and women share and equally participate in every aspect of society. Nevertheless the field of nuclear energy and radiation technology is traditionally a man-centric?industry, so women make up very small minority. However, recently even in this nuclear industry, we can sometimes see the phenomena that women are playing an active part.The nuclear industry has a big impact on society. It is necessary that we are accountable for all information given out to the public and we listen and respond to the public's concern. We do this so that nuclear technology will be able to grow and develop smoothly. In such area as better understanding, women working as nuclear engineers, scientists or communicators will be able to act in a significant role because women in general have excellent ability in communication and networking. Women in Nuclear, WiN is a worldwide association for the professional women working in the nuclear energy and radiation applications. WiN was founded in 1993, by European women involved in nuclear industry among the mood of anti-nuclear movement after the Chernobyl accident. The goals of WIN are to improve proper understanding of nuclear energy among the general public by presenting the factual information and to empower members' ability by world-wide exchange of lessons and human relationship. According to the recent data, there are 74 countries with at least one WiN member. and 38 chapters (countries/regions/organizations) that have WiN formal chapter like WIN-Japan, WIN-Korea, WIN-US, for examples. The registered members of WiN Global is about 2500. My presentation will introduce recent activities and topics of WiN Global and WiN Japan. I hope this will be able to convey that women working in nuclear field are indeed gaining in their brilliance and carrying out their mission steadily in our industry now and in the future. (Author)

  20. Civil engineering in the nuclear industry

    International Nuclear Information System (INIS)

    Dexter-Smith, R.

    1991-01-01

    Civil Engineering has an important contribution to make at every stage of the nuclear fuel cycle, from the choice of site and conception of the design of a major power station or fuel plan, through modifications during modifications, during operation, to the final stages of designing and building waste management stores and repositories and the decommissioning of stations and plants. The conference papers published here -twenty four in total - cover many of these stages. All the papers are indexed separately. Two international papers are presented, one on French PWRs, the other on repository design. Four papers look at site investigations, four are concerned with earthquake engineering, four with structural analysis, three with quality assurance, three with design and four with in-service performance and decommissioning. (UK)

  1. Updating Human Factors Engineering Guidelines for Conducting Safety Reviews of Nuclear Power Plants

    International Nuclear Information System (INIS)

    O'Hara, J.M.; Higgins, J.; Fleger, Stephen

    2011-01-01

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodic update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. This paper describes the role of HFE guidelines in the safety review process and the content of the key HFE guidelines used. Then we will present the methodology used to develop HFE guidance and update these documents, and describe the current status of the update program.

  2. Use of an advanced document system in post-refuelling updating of nuclear power plant documentation

    International Nuclear Information System (INIS)

    Puech Suanzes, P.; Cortes Soler, M.

    1993-01-01

    This paper discusses the results of the extensive use of an advanced document system to update documentation prepared by traditional methods and affected by changes in the period between two plant refuellings. The implementation of a system for the capture, retrieval and storage of drawings using optical discs is part of a plan to modernize production and management tools and to thus achieve better control of document configuration. These processes are consequently optimized in that: 1. The deterioration of drawings is detained with the help of an identical, updated, legible, reliable support for all users. 2. The time required to update documentation is reduced. Given the large number of drawings, the implementation method should effectively combine costs and time. The document management tools ensure optical disc storage control so that from the moment a drawing resides in the system, any modification to it is made through the system utilities, thus ensuring quality and reducing schedules. The system described was used to update the electrical drawings of Almaraz Nuclear Power Plant. Changes made during the eighth refuelling of Unit I were incorporated and the time needed to issue the updated drawings was reduced by one month. (author)

  3. Whistleblower litigation: A potential explosion in the nuclear industry

    International Nuclear Information System (INIS)

    Kowitt, A.J.; Panich, D.

    1990-01-01

    This article examines the protection offered nuclear employees and the limits of a nuclear employer's liability under section 210 of the Energy Reorganization Act. The author's warn that review by the US Supreme Court is not necessary but could only serve to expose the nuclear industry to an onslaught of litigation resulting from the assertion by an employee subjected to an adverse employment decision that the employee was engaged in a protected activity and as a result has a right to protection from retaliation by the employer

  4. Hanford K basins spent nuclear fuel project update

    International Nuclear Information System (INIS)

    Williams, N.H.; Hudson, F.G.

    1997-07-01

    Twenty one hundred metric tons of spent nuclear fuel (SNF) are currently stored in the Hanford Site K Basins near the Columbia River. The deteriorating conditions of the fuel and the basins provide engineering and management challenges to assure safe current and future storage. DE and S Hanford, Inc., part of the Fluor Daniel Hanford, Inc. lead team on the Project Hanford Management Contract, is constructing facilities and systems to move the fuel from current pool storage to a dry interim storage facility away from the Columbia River, and to treat and dispose of K Basins sludge, debris and water. The process starts in K Basins where fuel elements will be removed from existing canisters, washed, and separated from sludge and scrap fuel pieces. Fuel elements will be placed in baskets and loaded into Multi-Canister Overpacks (MCOs) and into transportation casks. The MCO and cask will be transported to the Cold Vacuum Drying Facility, where free water within the MCO will be removed under vacuum at slightly elevated temperatures. The MCOs will be sealed and transported via the transport cask to the Canister Storage Building

  5. Updated methodology for nuclear magnetic resonance characterization of shales

    Science.gov (United States)

    Washburn, Kathryn E.; Birdwell, Justin E.

    2013-08-01

    Unconventional petroleum resources, particularly in shales, are expected to play an increasingly important role in the world's energy portfolio in the coming years. Nuclear magnetic resonance (NMR), particularly at low-field, provides important information in the evaluation of shale resources. Most of the low-field NMR analyses performed on shale samples rely heavily on standard T1 and T2 measurements. We present a new approach using solid echoes in the measurement of T1 and T1-T2 correlations that addresses some of the challenges encountered when making NMR measurements on shale samples compared to conventional reservoir rocks. Combining these techniques with standard T1 and T2 measurements provides a more complete assessment of the hydrogen-bearing constituents (e.g., bitumen, kerogen, clay-bound water) in shale samples. These methods are applied to immature and pyrolyzed oil shale samples to examine the solid and highly viscous organic phases present during the petroleum generation process. The solid echo measurements produce additional signal in the oil shale samples compared to the standard methodologies, indicating the presence of components undergoing homonuclear dipolar coupling. The results presented here include the first low-field NMR measurements performed on kerogen as well as detailed NMR analysis of highly viscous thermally generated bitumen present in pyrolyzed oil shale.

  6. Intelligent systems and soft computing for nuclear science and industry

    International Nuclear Information System (INIS)

    Ruan, D.; D'hondt, P.; Govaerts, P.; Kerre, E.E.

    1996-01-01

    The second international workshop on Fuzzy Logic and Intelligent Technologies in Nuclear Science (FLINS) addresses topics related to intelligent systems and soft computing for nuclear science and industry. The proceedings contain 52 papers in different fields such as radiation protection, nuclear safety (human factors and reliability), safeguards, nuclear reactor control, production processes in the fuel cycle, dismantling, waste and disposal, decision making, and nuclear reactor control. A clear link is made between theory and applications of fuzzy logic such as neural networks, expert systems, robotics, man-machine interfaces, and decision-support techniques by using modern and advanced technologies and tools. The papers are grouped in three sections. The first section (Soft computing techniques) deals with basic tools to treat fuzzy logic, neural networks, genetic algorithms, decision-making, and software used for general soft-computing aspects. The second section (Intelligent engineering systems) includes contributions on engineering problems such as knowledge-based engineering, expert systems, process control integration, diagnosis, measurements, and interpretation by soft computing. The third section (Nuclear applications) focusses on the application of soft computing and intelligent systems in nuclear science and industry

  7. Nuclear heat for industrial purposes and district heating

    International Nuclear Information System (INIS)

    1974-01-01

    Studies on the various possibilities for the application of heat from nuclear reactors in the form of district heat or process steam for industrial purposes had been made long before the present energy crisis. Although these studies have indicated technical feasibility and economical justification of such utilization, the availability of relatively cheap oil and difficulties in locating a nuclear heat source inside industrial areas did not stimulate much further development. Since the increase of oil prices, the interest in nuclear heat application is reawakened, and a number of new potential areas have been identified. It now seems generally recognized that the heat from nuclear reactors should play an important role in primary energy supply, not only for electricity production but also as direct heat. At present three broad areas of nuclear heat application are identified: Direct heat utilization in industrial processing requiring a temperature above 800 deg. C; Process steam utilization in various industries, requiring a temperature mainly in the range of 200-300 deg. C; Low temperature and waste heat utilization from nuclear power plants for desalination of sea water and district heating. Such classification is mainly related to the type and characteristics of the heat source or nuclear reactor which could be used for a particular application. Modified high temperature reactor types (HTR) are the candidates for direct heat application, while the LWR reactors can satisfy most of the demands for process steam. Production of waste heat is a characteristic of all thermal power plants, and its utilization is a major challenge in the field of power production

  8. High technology supporting nuclear power industry in CRIEPI

    International Nuclear Information System (INIS)

    Ueda, Nobuyuki

    2009-01-01

    As a central research institute of electric power industry, Central Research Institute of Electric Power Industry (CRIEPI) has carried out R and D on broad range of topics such as power generation, power transmission, power distribution, power application and energy economics and society, aiming to develop prospective and advanced technologies, fundamental reinforce technologies and next-generation core technologies. To realize low-carbon society to cope with enhancement of global environmental issues, nuclear power is highly recommended as large-scale power with low-carbon emission. At the new start of serial explanation on advanced technologies, R and D on electric power industry was outlined. (T. Tanaka)

  9. Hanford K Basins spent nuclear fuels project update

    International Nuclear Information System (INIS)

    Hudson, F.G.

    1997-01-01

    Twenty one hundred metric tons of spent nuclear fuel are stored in two concrete pools on the Hanford Site, known as the K Basins, near the Columbia River. The deteriorating conditions of the fuel and the basins provide engineering and management challenges to assure safe current and future storage. DE and S Hanford, Inc., part of the Fluor Daniel Hanford, Inc. lead team on the Project Hanford Management Contract, is constructing facilities and systems to move the fuel from current wet pool storage to a dry interim storage facility away from the Columbia River, and to treat and dispose of K Basins sludge, debris and water. The process starts in the K Basins where fuel elements will be removed from existing canisters, washed, and separated from sludge and scrap fuel pieces. Fuel elements will be placed in baskets and loaded into Multi-Canister Overpacks (MCOs) and into transportation casks. The MCO and cask will be transported into the Cold Vacuum Drying Facility, where free water within the MCO will be removed under vacuum at slightly elevated temperatures. The MCOs will be sealed and transported via the transport cask to the Canister Storage Building (CSB) in the 200 Area for staging prior to hot conditioning. The conditioning step to remove chemically bound water is performed by holding the MCO at 300 C under vacuum. This step is necessary to prevent excessive pressure buildup during interim storage that could be caused by corrosion. After conditioning, MCOs will remain in the CSB for interim storage until a national repository is completed

  10. Hanford K Basins spent nuclear fuels project update

    Energy Technology Data Exchange (ETDEWEB)

    Hudson, F.G.

    1997-10-17

    Twenty one hundred metric tons of spent nuclear fuel are stored in two concrete pools on the Hanford Site, known as the K Basins, near the Columbia River. The deteriorating conditions of the fuel and the basins provide engineering and management challenges to assure safe current and future storage. DE and S Hanford, Inc., part of the Fluor Daniel Hanford, Inc. lead team on the Project Hanford Management Contract, is constructing facilities and systems to move the fuel from current wet pool storage to a dry interim storage facility away from the Columbia River, and to treat and dispose of K Basins sludge, debris and water. The process starts in the K Basins where fuel elements will be removed from existing canisters, washed, and separated from sludge and scrap fuel pieces. Fuel elements will be placed in baskets and loaded into Multi-Canister Overpacks (MCOs) and into transportation casks. The MCO and cask will be transported into the Cold Vacuum Drying Facility, where free water within the MCO will be removed under vacuum at slightly elevated temperatures. The MCOs will be sealed and transported via the transport cask to the Canister Storage Building (CSB) in the 200 Area for staging prior to hot conditioning. The conditioning step to remove chemically bound water is performed by holding the MCO at 300 C under vacuum. This step is necessary to prevent excessive pressure buildup during interim storage that could be caused by corrosion. After conditioning, MCOs will remain in the CSB for interim storage until a national repository is completed.

  11. Research on optical applications in nuclear industry

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Shin, Jang Soo; Lee, Sang Mock; Baik, Sung Hoon; Kwon, Seong Ouk; Hong, Suc Kyoung; Kim, Duk Hyeon

    1988-12-01

    The laser fluorometer developed in 1987 has been modified to compensate the inner filter and quenching effects. The signal processing electronic circuit was redesigned and a computer interface was introduced for data processing. It has been already used in routine chemical analysis in the chemical analysis division. Its application to uranium monitoring in conversion plant is being investigated. Also, we found that it can be used in trace analysis of samarium and europium with detection limit of 1 ppb and 0.1 ppb, respectively. The IRMPA/D process of CDF 3 and CHF 3 have been studied. The pressure effects of CDF 3 ,CHF 3 and added buffer gas were investigated. Mainly, the change in reaction rate was examined while varying the pressure of CDF 3 , CHF 3 and buffer gas. The IRMPD reaction ratio of CDF 3 and CHF 3 from below 0.1 torr up to a few torr was studied and the buffer gas pressure effect was investigated at constant pressure of CDF 3 or CHF 3 of 1 torr. Several kinds of buffer gas, Ar, N 2 , and SF 6 , were used to investigate the buffer gas pressure effect. We applied double exposure holographic interferometry, and analyzed qualitatively the distortion due to thermal heat and vibration. The research on holographic remote inspection will be achieved to apply this technique to the nuclear fuel cycle facilities. (Author)

  12. Description of jobs in the nuclear industry

    International Nuclear Information System (INIS)

    Dietrich, K.B.

    1984-01-01

    Indepently of the justified call for safety in nuclear power plants as the prime necessity, the were existence of the Atomic Law must not repeatedly allow restrictive trade agreement regulations or even legal acts which are at the cost of the employers concerned. In the opinion of the OeTV union there were and still are legal objections against the enactment of guidelines. The various passed guidelines and bills lieing at issue include extensive provisions for qualification requirements, examinations and systematical efficiency rating of the occupational groups concerned. These provisions infringe the right of free professional practice and the general rights of privacy. The systematical efficiency rating appears to be particularly critical. Inspite of extensive experience made so far, the question remains unanswered whether statutory instruments in the intendment of Art. 12, Para. 2 AtG could provide more flexible regulations. Finally, the author is expecting that - just like with measures under the Employment Protection Act - members of the works committee must be involved in the elaboration and alteration of guidelines and comparable regulations. (orig./HSCH) [de

  13. Some aspects of automation in nuclear industry

    International Nuclear Information System (INIS)

    Padegaonkar, Varsha; Modi, R.K.; Venkatesh, D.; Ramkumar, M.S.; Ramanujam, A.; Dhumwad, R.K.

    1990-01-01

    Operations with radioactive materials (radioactive solutions, irradiated nuclear fuels, waste, etc.) need very specialised remote handling equipment. There is an increasing tendency to automate jobs that can clearly be planned. These include a surprisingly large number of tasks - especially if one considers using flexible robotic systems that can be performed automatically, remotely safely. One such system, namely, a computer controlled robotic radioactive sample solution handling system is described. It basically consists of a cylindrical co-ordinate type robot (LABOT), a computer controlled storage vault of chemical samples, decapping-capping device for bottles and software. An attempt is being made to give the technician a menu of possible operations and help him for coherent chain of operations. The computer, in addition to operating the robot, the storage vault and other accessories, will also log the operations performed and maintain records. The operations carried out by the robot are that of a chemical laboratory technician like sampling, aliquoting, weighing, storage and recovery of samples, maintenance of records, etc.. The electronic control system and system software are described. (author)

  14. Current status and future prospects on nuclear industry in Korea

    International Nuclear Information System (INIS)

    Lee, Joongjae

    2006-01-01

    It is ny great pleasure to have this chance of speaking at twenty-first KAIF/KNS Annual Conference, with the subject of the current status and future prospects of nuclear industry in Korea. As you all know, since the start of operation in Obninsk, the former Soviet Union, on June 26th, 1954, nuclear generation in the world has expanded continuously for the past 50 years. In 1973, when the first oil crisis hit the world, there were 147 nuclear power plants in operation, supplying only 0.8% of the world energy demand. About 30 years later, by the end of last year, 443 plants were in operation in 32 countries, supplying about 16% of the world power demand. Nuclear power generation is greatly contributing to the energy security of many countries and preservation of global environments. Recently, countries all over the world are becoming aware of the values and importance of nuclear energy which can help respond to energy crises caused by a sharp rise in oil prices and protect the earth from global warming. Due to its high energy density and ability to secure fuel supply at a lower cost, in addition to its cleanliness resulting from almost no emission of greenhouse gases, nuclear power generation is the practical alternative for energy security and the prevention of global warming. However, in the rapidly changing 21st century, the nuclear industries of the world, as well as Korea, are facing more challenges than ever before. The political and social disputes on nuclear generation are continuing while we all are facing urgent challenges, including the concerns about the safety of nuclear generation, procuring site to build nuclear power plants, and the improvement of competitiveness. Please allow me to remind you that it is very important for the world's nuclear societies to cooperate together in order to overcome diverse difficulties along our path and to contribute to the development of mankind and preservation of natural environments with nuclear power as a

  15. Updated United Nations Framework Classification for reserves and resources of extractive industries

    Science.gov (United States)

    Ahlbrandt, T.S.; Blaise, J.R.; Blystad, P.; Kelter, D.; Gabrielyants, G.; Heiberg, S.; Martinez, A.; Ross, J.G.; Slavov, S.; Subelj, A.; Young, E.D.

    2004-01-01

    The United Nations have studied how the oil and gas resource classification developed jointly by the SPE, the World Petroleum Congress (WPC) and the American Association of Petroleum Geologists (AAPG) could be harmonized with the United Nations Framework Classification (UNFC) for Solid Fuel and Mineral Resources (1). The United Nations has continued to build on this and other works, with support from many relevant international organizations, with the objective of updating the UNFC to apply to the extractive industries. The result is the United Nations Framework Classification for Energy and Mineral Resources (2) that this paper will present. Reserves and resources are categorized with respect to three sets of criteria: ??? Economic and commercial viability ??? Field project status and feasibility ??? The level of geologic knowledge The field project status criteria are readily recognized as the ones highlighted in the SPE/WPC/AAPG classification system of 2000. The geologic criteria absorb the rich traditions that form the primary basis for the Russian classification system, and the ones used to delimit, in part, proved reserves. Economic and commercial criteria facilitate the use of the classification in general, and reflect the commercial considerations used to delimit proved reserves in particular. The classification system will help to develop a common understanding of reserves and resources for all the extractive industries and will assist: ??? International and national resources management to secure supplies; ??? Industries' management of business processes to achieve efficiency in exploration and production; and ??? An appropriate basis for documenting the value of reserves and resources in financial statements.

  16. ILK statement about the BMU project of updating nuclear rules and regulations

    International Nuclear Information System (INIS)

    2007-01-01

    In 2003, the German Federal Ministry for the Environment (BMU) started its ''Updating Nuclear Rules and Regulations'' project. Proposals to this effect are currently in revision phase B. They comprise a total of eleven main topics, referred to as modules, under the heading of ''Basic Principles of Safety of Nuclear Power Plants - Safety Requirements in Accordance with the State of the Art.'' The International Nuclear Technology Committee (ILK), in 2005, dealt with the requirements to be met in an up-to-date code of nuclear rules and regulations. Its findings were published in a total of 10 recommendations. The current revision B of the 11 modules contains no discernible incorporation of these recommendations. ILK therefore once more dealt with the BMU project. A summary of its deliberations is available. ILK finds that the safety requirements to be met by nuclear power plants as outlined in the BMU draft are unable to support the implementation of the German Atomic Energy Act. In earlier statements, ILK had written that it deemed updating the code of rules and regulations desirable. The existing draft contains many elements serving this purpose, such as the inclusion of off-power conditions and a more pronounced incorporation of matters of organization and management. The main shortcomings of the present draft are identified and analyzed. (orig.)

  17. Roadmap for human resources for expanded Indian nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Singh, R.K. [Bhabha Atomic Research Centre, Mumbai (India); Indian Nuclear Society (India); Srinivasan, G.R.; Goyal, O.P. [Bhabha Atomic Research Centre, Mumbai (India)

    2011-07-01

    This paper deals with detailed requirement of human resources for all phases of nuclear power plant, for the manufacturing sector and the probable roadmap for achieving India's target. The accident in Fukushima has brought out that only nuclear power that avoids being a threat to the health and safety of the population and the environmental will be acceptable to the society and for this to be achieved human resources could be a single major contributor. India has ambitious plan of achieving 20,000MW by 2020 and 63,000MW by 2050. It is felt out of the three resources men, material and money; the critical shortage would be human resources both in quality and quantity. As per IAEA report (Publication of 2008 edition of energy, electricity and nuclear power estimates for the period of 2030), nuclear capacity must grow to at least 1.8 times current capacity by 2030 if global temperature rises are to be kept at 2°C. Objective of recruiting and training human resources for Indian Industry can be as follows: a) For catering domestic market. b) For catering international market later on for nuclear industries outside India. As India will be an important future international player. The above would require a multiplication of human resources by nearly seven times. In addition it has to be wholesome covering all levels and all skills and all disciplines and stages covering the whole nuclear cycle including regulators. Human resources are required for design and engineering, construction, commissioning, operation, manufacturing and for support services. The manpower for these has to be trained to achieve high quality of nuclear standards. Presently Indian Department of Atomic Energy(DAE) runs several training schools giving one year Post Graduate, tailor made courses. This needs to be multiplied by Joint efforts. Training should be on 'SAT (Systematic Approach to Training)' methodology to ensure focussed, specific, needed to culminate in safe, reliable and

  18. Roadmap for human resources for expanded Indian nuclear industry

    International Nuclear Information System (INIS)

    Singh, R.K.; Srinivasan, G.R.; Goyal, O.P.

    2011-01-01

    This paper deals with detailed requirement of human resources for all phases of nuclear power plant, for the manufacturing sector and the probable roadmap for achieving India's target. The accident in Fukushima has brought out that only nuclear power that avoids being a threat to the health and safety of the population and the environmental will be acceptable to the society and for this to be achieved human resources could be a single major contributor. India has ambitious plan of achieving 20,000MW by 2020 and 63,000MW by 2050. It is felt out of the three resources men, material and money; the critical shortage would be human resources both in quality and quantity. As per IAEA report (Publication of 2008 edition of energy, electricity and nuclear power estimates for the period of 2030), nuclear capacity must grow to at least 1.8 times current capacity by 2030 if global temperature rises are to be kept at 2°C. Objective of recruiting and training human resources for Indian Industry can be as follows: a) For catering domestic market. b) For catering international market later on for nuclear industries outside India. As India will be an important future international player. The above would require a multiplication of human resources by nearly seven times. In addition it has to be wholesome covering all levels and all skills and all disciplines and stages covering the whole nuclear cycle including regulators. Human resources are required for design and engineering, construction, commissioning, operation, manufacturing and for support services. The manpower for these has to be trained to achieve high quality of nuclear standards. Presently Indian Department of Atomic Energy(DAE) runs several training schools giving one year Post Graduate, tailor made courses. This needs to be multiplied by Joint efforts. Training should be on 'SAT (Systematic Approach to Training)' methodology to ensure focussed, specific, needed to culminate in safe, reliable and viable operation of

  19. Enhancing Safety Culture in Complex Nuclear Industry Projects

    International Nuclear Information System (INIS)

    Gotcheva, N.

    2016-01-01

    This paper presents an on-going research project “Management principles and safety culture in complex projects” (MAPS), supported by the Finnish Research Programme on Nuclear Power Plant Safety 2015-2018. The project aims at enhancing safety culture and nuclear safety by supporting high quality execution of complex projects in the nuclear industry. Safety-critical industries are facing new challenges, related to increased outsourcing and complexity in technology, work tasks and organizational structures (Milch and Laumann, 2016). In the nuclear industry, new build projects, as well as modernisation projects are temporary undertakings often carried out by networks of companies. Some companies may have little experience in the nuclear industry practices or consideration of specific national regulatory requirements. In large multinational subcontractor networks, the challenge for assuring nuclear safety arises partly from the need to ensure that safety and quality requirements are adequately understood and fulfilled by each partner. Deficient project management practices and unsatisfactory nuclear safety culture in project networks have been recognised as contributing factors to these challenges (INPO, 2010). Prior evidence indicated that many recent major projects have experienced schedule, quality and financial challenges both in the nuclear industry (STUK, 2011) and in the non-nuclear domain (Ahola et al., 2014; Brady and Davies, 2010). Since project delays and quality issues have been perceived mainly as economic problems, project management issues remain largely understudied in safety research. However, safety cannot be separated from other performance aspects if a systemic view is applied. Schedule and quality challenges may reflect deficiencies in coordination, knowledge and competence, distribution of roles and responsibilities or attitudes among the project participants. It is increasingly understood that the performance of the project network in all

  20. The manufacturing of components for the nuclear industry

    International Nuclear Information System (INIS)

    Fogarty, John

    The experience of one company in the Canadian nuclear industry, a prime supplier of end fittings for CANDU type reactors, is described. Many factors such as work flow and continuity, financing, quality control, and export trade, are dealt with. (E.C.B.)

  1. Qualification of NDE personnel in the nuclear industry

    International Nuclear Information System (INIS)

    Epps, T.N.

    1984-01-01

    There has been evidence of ineffective programs for certifying nondestructive examination (NDE) personnel who conduct periodic inservice examinations in nuclear power plants under ASME Section XI Code requirements. This was brought to the attention of a group from the electric utility industry, the Electric Power Research Institute (EPRI), some NDE consultants and representatives from the American Society of Mechanical Engineers (ASME) by the Nuclear Regulatory Commission (NRC) in a May, 1982 meeting in Bethesda, Maryland. One problem pointed out by the NRC was the lack of a clear definition of qualification requirements for certification of NDE personnel who conduct ASME Section XI Inservice Inspection work in nuclear power plants. The NRC requested that the nuclear industry resolve this problem by formulating definitive qualification requirements for personnel certification that could be made an industry requirement. In June, 1982 the EPRI NDE Subcommittee held a general meeting for utility representatives to discuss the results of the May, 1982 meeting to develop a plan for industry response to the issue. The consensus was that an Ad Hoc Committee of utility representatives be convened to develop a document outlining qualification requirements for vertification of NDE personnel. The Ad Hoc Committee was formally convened on September 29, 1982

  2. US nuclear industry plans squeeze on O and M costs

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    The United States nuclear industry, still the largest in the world with 107 operating commercial plants, wants to squeeze still more fat out of operation and maintenance costs. Success or failure could decide whether many operating units remain competitive with other forms of baseload electricity generation over the coming decade. (Author)

  3. How the nuclear industry keeps it gases clean

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The paper surveys briefly the papers presented at a conference on gas filtration in the nuclear industry. The theory, development, design, use (under various conditions of temperature, humidity, corrosion), performance, cleaning and testing of fibrous, HEPA, metal, packed bed and magnetic filters are included, and the problems, advantages and disadvantages of the various types of filter are discussed. (U.K.)

  4. Intelligent robotics and remote systems for the nuclear industry

    International Nuclear Information System (INIS)

    Wehe, D.K.; Lee, J.C.; Martin, W.R.; Tulenko, J.

    1989-01-01

    The nuclear industry has a recognized need for intelligent, multitask robots to carry out tasks in harsh environments. From 1986 to the present, the number of robotic systems available or under development for use in the nuclear industry has more than doubled. Presently, artificial intelligence (AI) plays a relatively small role in existing robots used in the nuclear industry. Indeed, the lack of intelligence has been labeled the ''Achilles heel'' of all current robotic technology. However, larger-scale efforts are underway to make the multitask robot more sensitive to its environment, more capable to move and perform useful work, and more fully autonomous via the use of AI. In this paper, we review the terminology, the history, and the factors which are motivating the development of robotics and remove systems; discuss the applications related to the nuclear industry; and, finally, examine the state of the art of the technologies being applied to introduce more autonomous capabilities. Much of this latter work can be classified as within the artificial intelligence framework. (orig.)

  5. Technology transfer. Its contribution to the Canadian nuclear industry

    International Nuclear Information System (INIS)

    Perryman, E.C.W.

    1977-01-01

    Technology transfer from the Laboratories of Atomic Energy of Canada Limited is discussed in relation to the birth and growth of the Canadian Nuclear Industry. The evolution of the laboratories and their changing emphasis during the commercialization of the CANDU reactor system is described

  6. The French electromechanical industry in the nuclear sector

    International Nuclear Information System (INIS)

    Barrau, M. de.

    1981-02-01

    A brief paper recounting the extensive changes brought about in electromechanics further to the implementation of the large French nuclear programme and the experience that its implementation has given to this industry, in particular at ALSTHOM-ATLANTIQUE, the only French manufacturer of high power turbo-generating units rated among the big world manufacturers [fr

  7. Some electron beam welding equipments for the nuclear industry

    International Nuclear Information System (INIS)

    Helm, H.; Rodier, R.; Sayegh, G.

    1978-01-01

    Results of various electron beam welding equipment developed for the nuclear industry obtained from a 100 kW electron beam machine to weld thick plates made of stainless steel and reactor steel, and from some equipment with local vacuum to weld pipes onto a pipe wall. (orig.) [de

  8. Big 'Q' in the nuclear industry: A shift in perspective

    International Nuclear Information System (INIS)

    Paschall, C.C.

    1991-01-01

    The nuclear industry's shift toward total quality management, renewed emphasis on stating requirements and achieving consistent performance, is the subject of this paper. The impact of total quality management centers on three outward-focused areas: refined skills, performance, and process management. Process management requires a total change in organizational philosophy, policies, and management practice

  9. Transfer of industry-oriented nuclear technology at NUCOR

    International Nuclear Information System (INIS)

    De Jesus, A.S.M.

    1983-10-01

    The transfer of industry-oriented nuclear technology at the Nuclear Development Corporation of South Africa (Pty) Ltd (NUCOR) is centred in a few divisions only, as most of the NUCOR's program is internally oriented. The industry-oriented activities include radiation technology, production of radioisotopes and application of nuclear techniques in solving problems of industry. The study is concerned mainly with the last of these activities. The general problem of transferring innovative technology is reviewed and a systems approach is used to analyse the transfer process at NUCOR, in terms of the organisation itself and its environment. Organisational strengths and weaknesses are identified and used as a basis to determine opportunities and threats. Possible objectives are formulated and a strategy to meet them is suggested. 'Demand-pull' as opposed to 'technology-push' is advanced as the main triggering mechanism in the transfer of industry-oriented nuclear technology. The importance of marketing this technology, as well as its commercialization, are discussed

  10. Recent Movement, Issues and Some Counter plans in Nuclear Industry

    International Nuclear Information System (INIS)

    Lee, S. K.; Lee, J. K.; Cho, C. S.; Lee, C. C.; Park, C. O.

    2007-01-01

    There is no doubt 'Nuclear Energy' is the only source that can ensure the world's steady development in the foreseeable future. Nowadays is definitely what is called 'renaissance of nuclear.' As energy demand and economy increase, and global climate warms, the trend of nuclear dependency will be accelerated further. With 30 reactors being built around the world today, another 35 or more planned to come online during the next 10 years, and over two hundred further back in the pipeline, the global nuclear industry is clearly going forward strongly. Countries are seeking to replace old reactors as well as expand capacity, and an additional 25 countries are either considering or have already decided to make nuclear energy part of their power generation capacity. On the other hand, as current movement of world nuclear field, Korea has faced to one of the most important times since introducing nuclear power. Twenty nuclear power plants are run in Korea i.e. sixteen PWRs and four PHWRs now, and the capability of nuclear power production has been ranked world number six. In spite of this grand appearance, however, the influencing power on world nuclear society is not well matched to its status since it does not have a special hidden card which can appeal and impact on international community. In the era of nuclear renaissance, paradoxically, Korea is not in the situations of optimistic or pessimistic view. Now let's As energy demand and economy increase, and global climate warms, the trend of nuclear dependency will be accelerated further. With 30 reactors being built around the world today, another 35 or more planned to come online during the next 10 years, and over two hundred further back in the pipeline, the global nuclear industry is clearly going forward strongly. Countries are seeking to replace old reactors as well as expand capacity, and an additional 25 countries are either considering or have already decided to make nuclear energy part of their power generation

  11. Annual and activity report 2005 - INB - Brazilian Nuclear Industries. Nuclear fuel: technology for the essential

    International Nuclear Information System (INIS)

    2005-01-01

    This document reports the activities of Brazilian Nuclear Industry company during 2005 as follows: uranium isotope enrichment; production of nuclear fuel; mineral resources; finance and administration; planning and sales; quality, safety and environment, communication and social action; economic and financial management

  12. The partnership with other nuclear industries is important for the French industry

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2016-01-01

    After the French bid for the construction of a nuclear power plant in the United Arab Emirates (AE) failed in 2011, Assystem, a French engineering company decided to develop in the Middle-East and now has become one of the most important partners of KEPCO, the company in charge of constructing the Barakah plant in AE. In Turkey, Assystem has bought a Turkish enterprise to back the Franco-Japanese SINOP project and to initiate a partnership with Rosatom building the Akkuyu plant. Today Assystem has become an important player in nuclear industry and has been able to bring back to French nuclear industry its experience of different practices and know-how in international nuclear markets. Assystem employs 12.200 staff worldwide and realized a 908 Meuros turnover in 2015. (A.C.)

  13. Nuclear industry and production of energy: arguments for a discussion

    International Nuclear Information System (INIS)

    Sorin, F.

    2004-01-01

    This article reviews the advantages of nuclear energy (nuclear energy increases the energy autonomy of France, provides cheap energy, does not generate greenhouse effect gases and concerns an exporting high-tech industry that generates qualified jobs and added-value to French industry) and highlights its ability to fill the gap before renewable energies are efficient and reliable to produce large amounts of electric power and to face the present and future challenges like the progressive running dry of fossil energy sources or the compliance with the Kyoto agreement. The 2 controversial issues: the consequences of a terrorist attack on a nuclear facility and what to do with radioactive wastes are for the first one exaggerated in public opinion (some figures and facts concerning the resistance of the concrete containment that encloses a PWR type reactor are given in this article) and for the second the disposal in deep underground storage sites appears to be a solution. (A.C.)

  14. Preservation and re-use of nuclear knowledge in the UK nuclear industry

    International Nuclear Information System (INIS)

    Workman, R.

    2004-01-01

    This paper addresses the need for the UK nuclear industry to preserve knowledge generated during the 6 decades of its existence for re-use by future generations. It outlines the major government restructuring of the industry and its impact on knowledge preservation. Work within British Nuclear Fuels plc to meet the knowledge preservation requirements of its business is described. The focus is shown to be the alignment of tacit knowledge - gained through interviews with key specialists - with the explicit knowledge contained within the major knowledge base (Corporate Memory). The creation of knowledge packages to hold key knowledge on core technologies and nuclear plants is described. The paper also covers developments in securing the nuclear skill base through University Research Alliances and the Dalton Nuclear Institute. Returning to the major new challenges ahead it is shown how a knowledge portal could be implemented, linking the knowledge repositories present within the organisations that will feature in the restructured UK nuclear industry in 2005. The UK nuclear industry is facing its greatest challenge in terms of its organisation and commercial interests, at a time when the technical challenges presented by the decommissioning of old nuclear plants and the remediation of its nuclear sites are building up. In terms of knowledge preservation there has never been a greater need to ensure that knowledge associated with the key technologies that underpin the nuclear plants, and the plants themselves, is made available for use now and in the future. The Nuclear Decommissioning Authority [NDA] - a new government body that will come into being in April 2005 - will own the liabilities (the nuclear plants). Those organisations bidding to operate and decommission plants on the UK nuclear sites will utilise the assets to best effect as Site Licensing Companies [SLC] under contract to the NDA. The key asset is knowledge. Knowledge is present in explicit forms within

  15. Radiation safety in industrial applications of nuclear techniques

    International Nuclear Information System (INIS)

    Lam, E.S.

    1981-01-01

    The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

  16. Radiation safety in industrial applications of nuclear techniques

    Energy Technology Data Exchange (ETDEWEB)

    Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

    1981-01-01

    The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

  17. The third update of the Fukushima Daiichi Nuclear Station accident. September 1 through November 30, 2011

    International Nuclear Information System (INIS)

    Shibutani, Yu

    2011-01-01

    This article provides the third update of the Fukushima Daiichi accident that occurred on March 11, 2011. In the report of the first update of the Fukushima Daiichi accident on March 11 through May 31, the situation was reported on both on-site and off-site of the Fukushima Daiichi, including; failed cooldown of decay heat and meltdown of stricken reactors; emergency evacuation of local residents, radioactive contamination, spread of biased rumors by the information closure by government, regional cooperation with China, Taiwan and Korea, and visit of IAEA investigation team to Japan. The report of the second update on June 1 through August 31 reported the issues of, harsh public criticism against government and electric power companies, results of the public opinion poll, a sort of gentlemen's agreements between nuclear power companies and local governments which would be peculiar tradition in Japan, the first revision of the road map to cold shutdown of stricken reactors, and submission of report on Fukushima Daiichi accident to International Atomic Energy Agency (IAEA). This article provides the third update from September 1 through November 30, particularly on the issues of the second revision of the road map where the “cold shutdown” state should be reached before the end of 2011, the overview of governmental organization on the overall energy and nuclear policy, and the establishment of the nuclear disaster response headquarters (HQ) in the Prime Minister's Office. The HQ in collaboration with Tokyo Electric Power Company (TEPCO) decided the framework of road map plans, provision of various assistance and compensation for the residents affected by the nuclear incident, redefinition by the Nuclear Safety Commission for evacuation areas, recovery process of radioactive decontaminated areas, investigation and verification of the Fukushima Daiichi accident, reorganization of TEPCO management and financial system, establishment of damage compensation scheme

  18. Promoting nuclear power, achieving sustainable development of nuclear industry in China

    International Nuclear Information System (INIS)

    Kang, R.

    2006-01-01

    The past 5 decades witnessed the rapid growth of China's nuclear industry. The sustained and rapid economic growth and continuous improvement of people's living standards have placed higher requirements for energy and power supplies. As a safe and clean energy source, nuclear energy has been gradually and widely accepted by the Chinese government and the public. The Chinese government has adopted the policy a ctively pushing forward the nuclear power development , set up the target to reach 40GWe of nuclear power installed capacity by 2020, accounting for about 4% of the total installed capacity in China. In this regard, this paper presents the China's nuclear program to illustrate how China is going to achieve the target. The paper is composed of 3 parts. The first part gives a review of the achievements in nuclear power in the last 20 years. The second part presents China's ''three approach'' strategy for furthering the nuclear power development: carrying out duplication projects at the existing plant sites; introducing GUI technology via international bidding; developing the brand C NP1000 , i.e. Chinese Nuclear Power lOOOMwe class, with China's own intellectual property. This part also explores the ways of securing the fuel supply for nuclear power development. The third part concludes with CNNC's ''3221'' strategy which aims at building a world class conglomerate, and expresses its sincere wish to work with the nuclear community to push the nuclear industry worldwide by strengthening international cooperation

  19. Topics on Education Activities in Japanese Nuclear Industries

    International Nuclear Information System (INIS)

    Kuroiwa, Haruko

    2008-01-01

    The progression of an aging society with fewer children or a foreseeable decrease in population has caused the nuclear power plants under planning canceled or delayed. As a result, the number of students graduating with a nuclear degree began to decrease, while the development of the next generation light water reactor or of the practical use of the fast breeder reactor requires many skilled engineers. Atomic Energy Commission of Japan realized this potential impact of human resources. The Commission submitted the Framework for Nuclear Energy Policy including this issue to the government. The report says that without future talent development, Japan will lose its competitiveness against other industrialized countries, and that without replenishment after a large number of baby boomers retire, the shortage of specialists in the radiation field will occur. In conjunction with the Framework for Nuclear Energy Policy, the Ministry of Education, Culture, Sports, Science and Technology and the Ministry of Economy, Trade and Industry carried out the Nuclear Power Human Resources Development Program in 2007 fiscal year. The program focused on i) Support of educational activities, such as basic nuclear education and research, internship, and preparation of core curriculums and texts for nuclear power, ii) Implementation of research in the basic and infrastructure technology fields supporting the nuclear power (ex. structural strength, material strength, welding, erosion/corrosion, heat transfer, radiation safety). This program will continue till the end of 2009 fiscal year. Besides in order to promote nuclear power acceptance and to secure diversity, effective measures should be taken to support young, women, and foreign researchers and to promote their utilization. Mitsubishi accepts overseas students and researchers as an internship every year, and accelerates the safety architecture in the world. (author)

  20. Topics on Education Activities in Japanese Nuclear Industries

    Energy Technology Data Exchange (ETDEWEB)

    Kuroiwa, Haruko [Mitsubishi Heavy Industries, LTD - MHI, 2-16-5 Kona Minato-K 108-8215 Tokyo (Japan)

    2008-07-01

    The progression of an aging society with fewer children or a foreseeable decrease in population has caused the nuclear power plants under planning canceled or delayed. As a result, the number of students graduating with a nuclear degree began to decrease, while the development of the next generation light water reactor or of the practical use of the fast breeder reactor requires many skilled engineers. Atomic Energy Commission of Japan realized this potential impact of human resources. The Commission submitted the Framework for Nuclear Energy Policy including this issue to the government. The report says that without future talent development, Japan will lose its competitiveness against other industrialized countries, and that without replenishment after a large number of baby boomers retire, the shortage of specialists in the radiation field will occur. In conjunction with the Framework for Nuclear Energy Policy, the Ministry of Education, Culture, Sports, Science and Technology and the Ministry of Economy, Trade and Industry carried out the Nuclear Power Human Resources Development Program in 2007 fiscal year. The program focused on i) Support of educational activities, such as basic nuclear education and research, internship, and preparation of core curriculums and texts for nuclear power, ii) Implementation of research in the basic and infrastructure technology fields supporting the nuclear power (ex. structural strength, material strength, welding, erosion/corrosion, heat transfer, radiation safety). This program will continue till the end of 2009 fiscal year. Besides in order to promote nuclear power acceptance and to secure diversity, effective measures should be taken to support young, women, and foreign researchers and to promote their utilization. Mitsubishi accepts overseas students and researchers as an internship every year, and accelerates the safety architecture in the world. (author)

  1. Nuclear English: Language skills for a globalizing industry

    Energy Technology Data Exchange (ETDEWEB)

    Gorlin, S

    2005-07-01

    Nuclear English is a new course designed for English language learners working in the nuclear industry and in other fields of nuclear science and technology. The textbook is composed of 12 units, each covering a different aspect of the nuclear fuel cycle or a relevant topic such as non-proliferation, safety and the use of radioisotopes in medicine. Nuclear English offers a flexible approach, allowing learners to: Study the units in any order according to professional need or interest; Focus on listening, grammar and pronunciation tasks, which are clearly signposted; Work independently or with other students in a classroom. The other main features of the course are: A audio CD containing authentic interviews with industry specialists. The course covers various accents, including British, American, Australian, South African and Indian; Transcripts of the listening materials; A language orientation test, which learners can take at the start of the course to identify their grammar weaknesses; Teacher-led exercises for working in pairs or groups; A glossary of key terms; An answer key; a downloadable teacher's guide to help teachers maximize the learning potential of the materials (available at: www.world-nuclear-university.org)

  2. Nuclear English: Language skills for a globalizing industry

    International Nuclear Information System (INIS)

    Gorlin, S.

    2005-01-01

    Nuclear English is a new course designed for English language learners working in the nuclear industry and in other fields of nuclear science and technology. The textbook is composed of 12 units, each covering a different aspect of the nuclear fuel cycle or a relevant topic such as non-proliferation, safety and the use of radioisotopes in medicine. Nuclear English offers a flexible approach, allowing learners to: Study the units in any order according to professional need or interest; Focus on listening, grammar and pronunciation tasks, which are clearly signposted; Work independently or with other students in a classroom. The other main features of the course are: A audio CD containing authentic interviews with industry specialists. The course covers various accents, including British, American, Australian, South African and Indian; Transcripts of the listening materials; A language orientation test, which learners can take at the start of the course to identify their grammar weaknesses; Teacher-led exercises for working in pairs or groups; A glossary of key terms; An answer key; a downloadable teacher's guide to help teachers maximize the learning potential of the materials (available at: www.world-nuclear-university.org)

  3. The impact of deregulation on the US nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Baratta, A.J. [Pennsylvania State Univ., Nuclear Safety Center, University Park, PA (United States)

    2001-07-01

    In the United States, the electric utility industry is undergoing a dramatic shift away from a tightly regulated monopoly to a free market system. The impact on the nuclear utility industry of deregulation coupled with recent changes in the nuclear regulatory environment has had a dramatic impact on the future of nuclear power in the United States. Utilities have been broken up into separate generation, transmission, and distribution companies and are now allowed to sell electricity outside of their former service areas. As economic deregulation has occurred, the U.S. Nuclear Regulatory Commission has also adopted a new approach to regulation -- risk informed regulation. The implementation of risk-informed regulation has resulted in the adoption of a new regulatory format that attempts to highlight those areas having greatest risk significance. This paper explores these and other changes that have resulted because of the changing economic and regulatory environment for nuclear energy and examines their impact on the future of nuclear energy in the United States. (author)

  4. The impact of deregulation on the US nuclear industry

    International Nuclear Information System (INIS)

    Baratta, A.J.

    2001-01-01

    In the United States, the electric utility industry is undergoing a dramatic shift away from a tightly regulated monopoly to a free market system. The impact on the nuclear utility industry of deregulation coupled with recent changes in the nuclear regulatory environment has had a dramatic impact on the future of nuclear power in the United States. Utilities have been broken up into separate generation, transmission, and distribution companies and are now allowed to sell electricity outside of their former service areas. As economic deregulation has occurred, the U.S. Nuclear Regulatory Commission has also adopted a new approach to regulation -- risk informed regulation. The implementation of risk-informed regulation has resulted in the adoption of a new regulatory format that attempts to highlight those areas having greatest risk significance. This paper explores these and other changes that have resulted because of the changing economic and regulatory environment for nuclear energy and examines their impact on the future of nuclear energy in the United States. (author)

  5. Nuclear power industry buckles down to meet the competition

    International Nuclear Information System (INIS)

    Strauss, S.D.

    1996-01-01

    This article reports that owners of nuclear plants are beginning to realize that the bottom line dominates in the developing electricity marketplace. Embedded in recent successes is the emerging reorganization of the industry along more functional lines. From the standpoint of generating cost, nuclear power has had an up and down record. Reversing the upward trend that prevailed since the late 1970s, variable production costs at US nuclear stations have now fallen for seven consecutive years. The change has been spurred by the loss of its earlier economic edge and the reality that a deregulated energy market is fast approaching. Comparison with other electric-energy sources shows the need to continue the recent trend for nuclear to remain competitive. This point is underscored by Neil Carnz, CEO of Wolf Creek Nuclear Operating Corp. A leading force behind creation of a utility business alliance, Carnz notes that high capital costs place nuclear plants at a great disadvantage in the market, and labor is the prime area for offsetting it. Stating that some 130,000 people draw paychecks from nuclear-power production, including consultants, some non-utility people, and even regulators, the author contends that this number will have to be reduced by 40,000 to make nuclear power competitive with other forms of electric generation

  6. The evolution of nuclear energy Opportunities for the industry

    International Nuclear Information System (INIS)

    Dominguez, M. T.

    2013-01-01

    At the turn of the XXI century, the world energy context underwent a significant change due mainly to the increases in the demand for energy in the developing countries, a rise in gas prices and increased government support of clean energies in response to environmental issues. these boundary conditions led rapidly to renewed interest in nuclear energy worldwide. The phrase a Renaissance in nuclear energy was included in almost all energy forecasts. Unexpectedly, however, just then years later the panorama changed once again: unconventional gas appeared as new energy source, the world financial crisis hampered investment, and the demand for energy fell. This panorama has lowered expectations with regard to the size of the nuclear energy renaissance to a less buoyant but more balance scenario of nuclear energy deployment that we could now dub as the evolution of nuclear energy. This article describes how fission nuclear energy has continuously been evolving to adjust itself to these changing scenarios, and, in particular, how it is being adapted itself to todays vision of the role of the nuclear energy in the long term. The analysis in this paper focuses on those programs that could bring opportunities for Spanish nuclear industry participation. Starting with the development programs affecting existing reactors already in operation, the analysis moves on the new builds of Light Water Reactors (LWR) Generation III+, to then address, in two sections, Research Reactors and finally, the opportunities presented by Generation IV technologies. The development of fusion technology is not covered in this paper. (Author)

  7. Importance of Advanced Planning of Manufacturing for Nuclear Industry

    Directory of Open Access Journals (Sweden)

    Shykinov Nick

    2016-06-01

    Full Text Available In the context of energy demands by growing economies, climate changes, fossil fuel pricing volatility, and improved safety and performance of nuclear power plants, many countries express interest in expanding or acquiring nuclear power capacity. In the light of the increased interest in expanding nuclear power the supply chain for nuclear power projects has received more attention in recent years. The importance of the advanced planning of procurement and manufacturing of components of nuclear facilities is critical for these projects. Many of these components are often referred to as long-lead items. They may be equipment, products and systems that are identified to have a delivery time long enough to affect directly the overall timing of a project. In order to avoid negatively affecting the project schedule, these items may need to be sourced out or manufactured years before the beginning of the project. For nuclear facilities, long-lead items include physical components such as large pressure vessels, instrumentation and controls. They may also mean programs and management systems important to the safety of the facility. Authorized nuclear operator training, site evaluation programs, and procurement are some of the examples. The nuclear power industry must often meet very demanding construction and commissioning timelines, and proper advanced planning of the long-lead items helps manage risks to project completion time. For nuclear components there are regulatory and licensing considerations that need to be considered. A national nuclear regulator must be involved early to ensure the components will meet the national legal regulatory requirements. This paper will discuss timing considerations to address the regulatory compliance of nuclear long-lead items.

  8. Quantity and quality in nuclear engineering professional skills needed by the nuclear power industry

    International Nuclear Information System (INIS)

    Slember, R.J.

    1990-01-01

    This paper examines the challenge of work force requirements in the context of the full range of issues facing the nuclear power industry. The supply of skilled managers and workers may be a more serious problem if nuclear power fades away than if it is reborn in a new generation. An even greater concern, however, is the quality of education that the industry needs in all its future professionals. Both government and industry should be helping universities adapt their curricula to the needs of the future. This means building a closer relationship with schools that educate nuclear professionals, that is, providing adequate scholarships and funding for research and development programs, offering in-kind services, and encouraging internships and other opportunities for hands-on experience. The goal should not be just state-of-the-art engineering practices, but the broad range of knowledge, issues, and skills that will be required of the nuclear leadership of the twenty-first century

  9. The trilogy nuclear technology-quality-reliability in nuclear energy: the interface technical regulation/industrial norm in the nuclear industry

    International Nuclear Information System (INIS)

    Costa, Jose Ribeiro da

    1995-01-01

    In this paper, it is tried to find out a compatibility among Regulations (mandatory) documents governing Quality Assurance Requirements for the Nuclear Industry (like IAEA/50-C-QA, IAEA/50-SG-QA1, IAEA/50-SG-QA7, and others), with similar documents prescribing same requirements for COnventional Industry (like ISO/900 Series), using the technical support of the prescriptions contained in the IAEA/TR-328 documents. Harmonization and compatibility of these documents is a great deal for Industries engaged -directly or indirectly - in the Nuclear Technology, taking into account that such compatibility can avoid troubles for already ISO/9000 Series Certified Industries in the fulfillment of its contract requirements in the nuclear field. Its also represents in that field a symbiosis between Technical Regulations (mandatory) and Voluntary Standards (Industrial, Consensual Standards). (author). 7 refs., 1 fig., 1 tab

  10. The INSTN trains the future professionals of nuclear industry

    International Nuclear Information System (INIS)

    Correa, P.

    2017-01-01

    The INSTN (Institute for Nuclear Sciences and Nuclear Technologies) is the applied school in nuclear technologies that has been present for 60 years for specialized training and vocational training. The integration of numerical technologies has allowed INSTN to adapt its way of teaching and to overcome difficulties like distances and to propose for instance practical exercises on the ISIS experimental reactor through the web for foreign graduate schools. The INSTN has realized its first SPOC (Small Private Online Course) and is preparing 2 MOOC (Massive Open Online Course). Since 2016, the INSTN has become 1 of the 2 training centers appointed as 'collaborating center' by the IAEA in the field of nuclear technologies and their industrial and radio-pharmaceutical applications. (A.C.)

  11. Perspective on radiation from the nuclear power industry

    International Nuclear Information System (INIS)

    Cohen, B.L.

    1990-01-01

    Methods for estimating the risk of radiation induced cancer mortality to members of the public are outlined for each element of the nuclear power industry - reactor accidents, routine releases from nuclear plants, transport, mining and milling of uranium, and escape of buried radioactive waste (high level and low level). The results are compared with mortality risks from the air pollution and chemical carcinogens released into the ground in generating the same amount of electricity by coal burning - the latter are thousands of times larger. Radiation from nuclear power is also 1,000 times smaller than that from radon in homes. The amount of money spent to avert a death from nuclear power radiation is in the billion dollar range, whereas lives could be saved from radon in homes for 0.00001 times that cost. Medical screening and highway safety programs can save lives for a similarly low cost

  12. SOVT analysis of the nuclear industry in Mexico; Analisis FODA de la industria nuclear en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez R, E.; Hernandez B, M. C., E-mail: edelmiraf@yahoo.com [Instituto Tecnologico de Toluca, Division de Estudios de Posgrado, Av. Instituto Tecnologico s/n, Ex-rancho La Virgen, 52140 Metepec, Estado de Mexico (Mexico)

    2011-11-15

    In this work the analysis of strengths, opportunities, vulnerabilities and threats (SOVT) of the nuclear industry in Mexico is presented. This industry presents among its strengths that Mexico is a highly electrified country and has a good established normative mark of nuclear security. Although the Secretaria de Energia in Mexico, with base to the exposed in the Programa Sectorial de Energia 2007-2012, is analyzing the convenience of the generation starting from this source, considering the strong technological dependence of the exterior and the limited federal budget dedicated to this field. As a result of the analysis of the SOVT matrix, were found a great number of strengths that threats, although the vulnerabilities list is major to the strengths, the opportunities list is the bigger. Therefore, the nuclear industry can be a sustainable industry, taking the necessary decisions and taking advantage of the detected opportunities. (Author)

  13. Consensus together to jointly promote the safe and efficient development of China's Nuclear industry

    International Nuclear Information System (INIS)

    Lei Zengguang

    2012-01-01

    After the development of China's nuclear industry 56 years, and a certain ability to form a strategic advantage for sustainable development, laying a solid foundation for the development of the national nuclear energy. 2011 Japan's Fukushima Daiichi nuclear accident occurred seven. 2011 of the 'Economic and Social Development Twelfth Five Five Year plan' clearly stated: 'on the basis of ensuring efficient and safe development of nuclear power', the development of China's nuclear industry is facing unprecedented opportunities and challenges, requiring the nuclear industry and nuclear academia work together to jointly promote China's nuclear industry safe and efficient, development

  14. Temporary worker in the nuclear power industry: an equity analysis

    International Nuclear Information System (INIS)

    Melville, M.H.

    1981-01-01

    There are clear indications based both on the statistical data and on empirical evidence that the employment of large numbers of temporary workers has become a permanent and growing characteristic of the industry. It appears that the size of that work force has been seriously underestimated and that it receives a disproportionate share of the occupational radiation. In order to stay within the limits governing individual exposure in the workplace, the risk has been spread among a larger segment of the population. These facts raise important and ongoing issues of societal and employer responsibility. By the reckonings of this study, the total number of workers employed on a temporary basis by the nuclear power industry is eighteen times greater than those much more narrowly defined by the Nuclear Regulatory Commission (NRC) as transient workers: individuals hired and terminating employment with two or more employers in one quarter. It is estimated that the whole temporary work force numbered about 23,520 in 1976, over a third (35%) of the industry total, and absorbed 47.5% of the total occupational radiation dose. The problems, then, are not inconsiderable: they affect thousands of individuals, a significant segment of the nuclear power industry's work force, members of society who are subjected to a disproportionate burden of radiation risk. Among the conclusions is that it may be necessary to establish special standards, limitations, and records for temporary workers to ensure adequate health protection, follow-up, and care

  15. The 'Pole Nucleaire Bourgogne' for developing the nuclear components industry

    International Nuclear Information System (INIS)

    Kottmann, G.

    2012-01-01

    The 'Pole Nucleaire Bourgogne' (PNB) is a high-technology and heavy industries cluster in Burgundy with an international calling. It aims at innovating, educating and federating in order to place the French nuclear industry in a leading position. PNB gathers 76 small-, and medium-sized enterprises, most of them operating in the metal sector, in design and in the control/measuring sector. The aim of PNB is to make enterprises work and cooperate on specific topics according to their sectors of activities and their skills. PNB has identified 3 domains of strategical innovations: -) ecological manufacturing and durability of heavy components, -) controls for high performance components, and -) maintenance and dismantling techniques in hostile environments. The various industry sectors represented in PNB allows a cross-fertilization between high-tech industries (aeronautics, energy, transportation)

  16. Managing human resources in the nuclear power industry: Lessons learned

    International Nuclear Information System (INIS)

    2003-08-01

    This report is intended for senior and middle level managers in nuclear operating organizations. Its objectives are to facilitate the recognition of priority issues with respect to managing human resources, and to provide pragmatic ideas regarding improvements. The human resource issues addressed in this report, if not managed effectively, can result in significant performance problems at nuclear power plants. About 10 years ago the IAEA initiated an effort to identify such management issues and to find effective practices to deal with them. This information was provided in IAEA Technical Reports Series No. 369, Management for Excellence in Nuclear Power Plant Performance - A Manual (1994). This report builds upon the information in the subject manual. In the past 10 years there have been significant changes in the nuclear power industry resulting primarily from more competitive energy markets and privatization of nuclear power plant operating organizations. In general, the industry has responded positively to these changes, as indicated by IAEA/WANO performance indicators that show both improved operational and safety performance. This report provides examples of approaches to managing human resources that have been effective in responding to these changes. This report was produced through a series of meetings, where meeting participants were asked to share information regarding effective practices in their organizations with respect to managing human resources. The information provided through these meetings was supplemented with good practices in this area identified through IAEA Operational Safety Review Teams (OSARTs) conducted during the past 10 years

  17. A view from the nuclear fuel reprocessing industry

    International Nuclear Information System (INIS)

    Smith, R.; Hartley, G.

    1982-01-01

    Radiological protection in UK nuclear industry is discussed, with special reference to British Nuclear Fuels Ltd. The following aspects are covered: historical introduction, relevant legislation and general principles; radioactive decay processes (fission, fission products, radio-isotopes, ionising radiations, neutrons); risk assessment (historical, biological radiation effects; ICRP recommendations, dose limits); cost effectiveness of protection; plant design principles; examples of containment (shielding, ventilation and contamination control required for various types of radioactive materials, e.g. fission products, plutonium, depleted uranium; fuel rod storage ponds and decanning caves; fission products at dissolution stage; glovebox handling of Pu operations; critical assembly of fissile materials; surface contamination control; monitoring radiation levels). (U.K.)

  18. The British Nuclear Industry Forum's public affairs campaign

    International Nuclear Information System (INIS)

    Parker, Keith

    2000-01-01

    Full text: In March 1999, BNIF launched a public affairs Campaign with the objective of influencing the views of opinion formers - particularly in the political field - about the case for nuclear energy as a long-term, sustainable component of the UK's energy mix. The Campaign was launched to BNIF's 70 member companies under the slogan, Profiting through Partnership - By Changing the Climate of Opinion. That slogan was chosen to emphasise a key feature of the Campaign approach, which is the importance of an industry speaking collectively with one voice, but with each individual company actively playing its part by spreading the industry's messages to their own local and regional audiences - Members of Parliament, local politicians, local media - to build a groundswell of support for the eventual renewal of nuclear energy in the UK. Our aim was to place the prospect of a new nuclear power station firmly on the political agenda during the lifetime of the next Parliament - that is, in the period 2002-2007. The Campaign was launched at a time when a few encouraging signs were emerging of a growing recognition in Government, Parliament, and in academic and scientific circles that nuclear energy has an important role to play in meeting the energy and environmental challenges of the 21st century. The challenge, in particular, of climate change and the UK Government's commitment to reduce greenhouse gas emissions undertaken at Kyoto and in its election manifesto, gave the industry a strong, positive issue on which to campaign. However, we fully recognised that to make a convincing case for nuclear energy we would also have to address the issues of concern and doubt in the minds of the public and politicians - economic competitiveness, waste management, transport and decommissioning. During the year, BNIF produced a range of Campaign materials, made submissions to several Government and other inquiries and consultations, organised events, meetings and discussions, all with

  19. Applications of nuclear microprobes in the semiconductor industry

    International Nuclear Information System (INIS)

    Takai, M.

    1996-01-01

    Possible nuclear microprobe applications in semiconductor industries are discussed. A unique technique using soft-error mapping and ion beam induced current measurements for reliability testing of dynamic random access memories such as soft-error immunity and noise carrier suppression has been developed for obtaining design parameters of future memory devices. Nano-probes and small installation areas are required for the use of microprobes in the semiconductor industry. Issues arising from microprobe applications such as damage induced by the probe beam are clarified. (orig.)

  20. Towards a nuclear industry boosted by artificial intelligence?

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2017-01-01

    Artificial intelligence (AI) is deemed as the fourth industrial revolution after the steam engine, electric power and the computer. Auto manufacturers invest a lot in AI to develop autonomous vehicles. Nuclear industry that has to deal with a huge amount of data due to the complexity of its installations may benefit from AI in terms of quick handling of complex situations, of reducing the rate of errors, of drawing adequate conclusions through the right crossing of data and of improving decision making. (A.C.)