WorldWideScience

Sample records for northern engineering centre

  1. Limitation of Piston Centre Shift in Free Piston Stirling Engines

    Energy Technology Data Exchange (ETDEWEB)

    Van der Woude, R.R. [ECN Energy in the Built Environment and Networks, Petten (Netherlands)

    2006-09-15

    Piston centre shift is one of the phenomena setting Free Piston engines apart from traditional kinematic engines. In kinematic engines the piston centre position is determined by the design of the engine's internal mechanisms. In Free Piston engines however, the piston's mid-stroke position is determined by the balance of forces acting on the piston, in particular flexure and gas pressure forces. As a result, a mean pressure difference across the piston emerging during engine operation will cause the piston mid-stroke position to shift away from the geometrical centre. This process will continue until a new balance is reached with the flexure forces counteracting the new mean pressure balance. Yet, before the new equilibrium is reached, the resulting piston centre shift may have grown to such an extent that piston overstrokes have become inevitable. In order to limit piston centre shift and prevent piston overstrokes, several solutions have been proposed in the past. Popular solutions include ingenious mechanisms to vent gas between the spaces separated by the piston, in an attempt to limit the pressure difference. Enatec however has adopted a different approach by applying a precisely determined clearance between the piston and cylinder. With the right shape the clearance effectively limits the mean pressure difference across the piston and therefore limits the extent of the piston centre drift. Taking benefit of tightly controlled tolerances of both piston and cylinder, Enatec has demonstrated the effectiveness of this simple concept in series produced engines.

  2. Centre for nuclear engineering University of Toronto annual report 1984

    International Nuclear Information System (INIS)

    1984-12-01

    The annual report of the Centre for Nuclear Engineering, University of Toronto covers the following subjects: message from the Dean; Chairman's message; origins of the centre; formation of the centre; new nuclear appointments; and activities of the centre, 1984

  3. Northern Resource Centre: a first step toward a University of the North

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    The Science Council of Canada has argued that there is a need for a balanced science policy for northern development. Objectives would be to promote the welfare of northern people, especially the indigenous peoples, through encouragement of appropriate developments designed to aid, where the people desire, community development, the retention of traditional life styles and cultures, as well as opportunities for participation in wage activities which support this general objective. This objective encompasses the extension of appropriate health and dental care, housing, and municipal services. Additionally, environmental considerations including land-use policies, should be important components in the decision-making process for northern projects. Renewable energy resource development should have a higher priority than at present. The goal is the economic and social sufficiency of northern communities. Economically viable nonrenewable resource projects should be encouraged. Recommendations to be followed for establishing the Northern Resource Centre are described. (MCW)

  4. Establishing a `Centre for Engineering Experimentation and Design Simulation': a step towards restructuring engineering education in India

    Science.gov (United States)

    Venkateswarlu, P.

    2017-07-01

    Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with necessary skills to create and advance knowledge that meets global standards. To achieve this goal, this paper proposes establishing a central facility, 'Centre for Engineering Experimentation and Design Simulation' (CEEDS) in autonomous engineering colleges in India. The centre will be equipped with the most recent technology resources and computational facilities where students execute novel interdisciplinary product-oriented projects benefiting both industry and society. Students undertake two projects: a short-term project aimed at an engineering solution to a problem in energy, health and environment and the other a major industry-supported project devoted to a product that enhances innovation and creativity. The paper presents the current status, the theoretical and pedagogical foundation for the centre's relevance, an activity plan and its implementation in the centre for product-based learning with illustrative examples.

  5. Critical needs for piston engine overhaul centre in Malaysia

    Science.gov (United States)

    Khairuddin, M. H.; Yahya, M. Y.; Johari, M. K.

    2017-12-01

    Piston engine overhaul centre (PEOC) is the branch of aviation Maintenance, Repair and Overhaul (MRO) providers, which plays a pivotal role in maintaining the fleet of business and commercial aircraft in the world. The centre typically offers three main MRO capabilities: airframe, engine and component services. Companies holding a PEOC(s) are all subjected to stringent procedures and conditions regulated and audited by the International Civil Aviation Organization. Currently, piston engine maintenance and repair for Asian countries is conducted only in Singapore. The focus of this study is to establish the needs for a PEOC in Malaysia, which will cater almost all small local aircraft companies such as transport and flying school companies.

  6. NNC's engineering development centre at Risley

    International Nuclear Information System (INIS)

    Garnsey, R.

    1994-01-01

    NNC's Engineering Development Centre (EDC) provides specialist engineering, manufacturing and development support to customers. EDC is located at Risley, near Warrington, but its operation are closely integrated into the Company's overall business activities based at its headquarters in Knutsford, Cheshire, fifteen miles away. EDC's facilities and expertise were originally developed to support the UK's nuclear power station construction programme. However, EDC professionals have since applied their specialist expertise to the benefit of new customers in line with the Company's diversification and a large and growing proportion of work is now in support of the defence and process industries. (author)

  7. Nano-engineered pinning centres in YBCO superconducting films

    Energy Technology Data Exchange (ETDEWEB)

    Crisan, A., E-mail: adrian.crisan@infim.ro [National Institute for Materials Physics Bucharest, 105 bis Atomistilor Str., 077125 Magurele (Romania); School of Metallurgy and Materials, University of Birmingham, Edgbaston, B15 2TT Birmingham (United Kingdom); Dang, V.S. [School of Metallurgy and Materials, University of Birmingham, Edgbaston, B15 2TT Birmingham (United Kingdom); Nano and Energy Center, VNU Hanoi University of Science, 334 Nguyen Trai, Thanh Xuan, Hanoi (Viet Nam); Mikheenko, P. [School of Metallurgy and Materials, University of Birmingham, Edgbaston, B15 2TT Birmingham (United Kingdom); Department of Physics, University of Oslo, P.O. Box 1048 Blindern, N-0316 Oslo (Norway)

    2017-02-15

    Highlights: • Power applications of YBCO films/coated conductors in technological relevant magnetic fields requires nano-engineered pinning centre. • Three approaches have been proposed: substrate decoration, quasi-multilayers, and targets with secondary phase nano-inclusions. • Combination of all three approaches greatly increased critical current in YBCO films. • Bulk pinning force, pinning potential, and critical current density are estimated and discussed in relation with the type and strength of pinning centres related to the defects evidenced by Transmission Electron Microscopy. - Abstract: For practical applications of superconducting materials in applied magnetic fields, artificial pinning centres in addition to natural ones are required to oppose the Lorentz force. These pinning centres are actually various types of defects in the superconductor matrix. The pinning centres can be categorised on their dimension (volume, surface or point) and on their character (normal cores or Δκ cores). Different samples have been produced by Pulsed Laser Deposition, with various thicknesses, temperatures and nanostructured additions to the superconducting matrix. They have been characterized by SQUID Magnetic Properties Measurement System and Physical Properties Measurement System, as well as by Transmission Electron Microscopy (TEM). Correlations between pinning architecture, TEM images, and critical currents at various fields and field orientations will be shown for a large number of YBa{sub 2}Cu{sub 3}O{sub x} films with various types and architectures of artificial pinning centres.

  8. `Googling' Terrorists: Are Northern Irish Terrorists Visible on Internet Search Engines?

    Science.gov (United States)

    Reilly, P.

    In this chapter, the analysis suggests that Northern Irish terrorists are not visible on Web search engines when net users employ conventional Internet search techniques. Editors of mass media organisations traditionally have had the ability to decide whether a terrorist atrocity is `newsworthy,' controlling the `oxygen' supply that sustains all forms of terrorism. This process, also known as `gatekeeping,' is often influenced by the norms of social responsibility, or alternatively, with regard to the interests of the advertisers and corporate sponsors that sustain mass media organisations. The analysis presented in this chapter suggests that Internet search engines can also be characterised as `gatekeepers,' albeit without the ability to shape the content of Websites before it reaches net users. Instead, Internet search engines give priority retrieval to certain Websites within their directory, pointing net users towards these Websites rather than others on the Internet. Net users are more likely to click on links to the more `visible' Websites on Internet search engine directories, these sites invariably being the highest `ranked' in response to a particular search query. A number of factors including the design of the Website and the number of links to external sites determine the `visibility' of a Website on Internet search engines. The study suggests that Northern Irish terrorists and their sympathisers are unlikely to achieve a greater degree of `visibility' online than they enjoy in the conventional mass media through the perpetration of atrocities. Although these groups may have a greater degree of freedom on the Internet to publicise their ideologies, they are still likely to be speaking to the converted or members of the press. Although it is easier to locate Northern Irish terrorist organisations on Internet search engines by linking in via ideology, ideological description searches, such as `Irish Republican' and `Ulster Loyalist,' are more likely to

  9. Access to yellow fever travel vaccination centres in England, Wales, and Northern Ireland: A geographical study.

    Science.gov (United States)

    Petersen, Jakob; Simons, Hilary; Patel, Dipti

    More than 700,000 trips were made by residents in England, Wales, and Northern Ireland (EWNI) in 2015 to tropical countries endemic for yellow fever, a potentially deadly, yet vaccine-preventable disease transmitted by mosquitoes. The aim of this study was to map the geographical accessibility of yellow fever vaccination centres (YFVC) in EWNI. The location of 3208 YFVC were geocoded and the average geodetic distance to nearest YFVC was calculated for each population unit. Data on trips abroad and centres were obtained regionally for EWNI and nationally for the World Top20 countries in terms of travel. The mean distance to nearest YFVC was 2.4 km and only 1% of the population had to travel more than 16.1 km to their nearest centre. The number of vaccines administered regionally in EWNI was found correlated with the number of trips to yellow fever countries. The number of centres per 100,000 trips was 6.1 in EWNI, which was below United States (12.1) and above the rest of Top20 countries. The service availability was in line with demand regionally. With the exception of remote, rural areas, yellow fever vaccination services were widely available with only short distances to cover for the travelling public. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  10. Human factors engineering applied to Control Centre Design of a research nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Larissa P. de; Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R., E-mail: larissapfarias@ymail.com [Instituto de Engenharia Nuclear (DENN/SEESC/IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab, de Usabilidade e Confiabilidade Humana; Monteiro, Beany G. [Universidade Federal do Rio Janeiro (UFRJ), Rio Janeiro, RJ (Brazil). Departamento de Desenho Industrial

    2017-07-01

    The Human Factors Engineering (HFE) program is an essential aspect for the design of nuclear installations. The overall aim of the HFE program is the improvement of the operational reliability and safety of plant operation. The HFE program main purpose is to ensure that human factor practices are incorporated into the plant design, emphasizing man-machine interface issues and design improvement of the nuclear reactor Control Centre. The Control Centre of nuclear reactor is a combination of control rooms, control suites and local control stations, which are functionally connected and located on the reactor site. The objective of this paper is to present a design approach for the Control Centre of a nuclear reactor used to produce radioisotopes and for nuclear research, including human factor issues. The design approach is based on participatory design principles, using human factor standards, ergonomic guidelines, and the participation of a multidisciplinary team during all design phases. Using the information gathered, an initial sketch 3D of the Control Centre was developed. (author)

  11. Human factors engineering applied to Control Centre Design of a research nuclear reactor

    International Nuclear Information System (INIS)

    Farias, Larissa P. de; Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R.; Monteiro, Beany G.

    2017-01-01

    The Human Factors Engineering (HFE) program is an essential aspect for the design of nuclear installations. The overall aim of the HFE program is the improvement of the operational reliability and safety of plant operation. The HFE program main purpose is to ensure that human factor practices are incorporated into the plant design, emphasizing man-machine interface issues and design improvement of the nuclear reactor Control Centre. The Control Centre of nuclear reactor is a combination of control rooms, control suites and local control stations, which are functionally connected and located on the reactor site. The objective of this paper is to present a design approach for the Control Centre of a nuclear reactor used to produce radioisotopes and for nuclear research, including human factor issues. The design approach is based on participatory design principles, using human factor standards, ergonomic guidelines, and the participation of a multidisciplinary team during all design phases. Using the information gathered, an initial sketch 3D of the Control Centre was developed. (author)

  12. Association of manual or engine-driven glide path preparation with canal centring and apical transportation: a systematic review.

    Science.gov (United States)

    Hartmann, R C; Peters, O A; de Figueiredo, J A P; Rossi-Fedele, G

    2018-04-28

    The role and effect of glide path preparation in root canal treatment remain controversial. This systematic review aims to compare apical transportation and canal centring of different glide path preparation techniques, with or without subsequent engine-driven root canal preparation. A database search in PubMed, PubMed Central, Embase, Scopus, EBSCO Dentistry & Oral Sciences Source and Virtual Health Library was conducted, using appropriate key words to identify the effect of glide path preparation (or its absence) on apical transportation and canal centring. An assessment for the risk of bias in included studies was carried out. Amongst 2146 studies, 18 satisfied the inclusion criteria. Nine studies assessed glide path preparation per se, comparing apical transportation and canal centring of rotary systems and/or manual files; eleven further investigations examined the efficacy of the glide path prior to final canal preparation with different engine-driven systems. Risk of bias and other study design features with potential influence on study outcomes and clinical implications were assessed. Based on the available evidence, and within the limitation of the studies included, preparation of a glide path using rotary sequences performs similarly (in most of the component studies) or significantly better than manual preparation when assessing apical transportation or canal centring. When compared to the absence of a glide path, canal shaping following glide path preparation was of similar, or significantly better quality, in regard to apical transportation or canal centring. © 2018 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  13. UK Renal Registry 16th annual report: chapter 14 2012 multisite dialysis access audit in England, Northern Ireland and Wales and 2011 PD one year follow-up: national and centre-specific analyses.

    Science.gov (United States)

    Briggs, Victoria; Pitcher, David; Shaw, Catriona; Fluck, Richard; Wilkie, Martin

    2013-01-01

    Dialysis access should be timely, minimise complications and maintain functionality. Good functional access is required for renal replacement therapy (RRT) to be successful. The aim of the combined vascular and peritoneal dialysis access audit was to examine practice patterns with respect to dialysis access and highlight variations in practice between renal centres. The UK Renal Registry collected centre-specific information on vascular and peritoneal access outcome measures including patient demographics, dialysis access type (at start of dialysis and three months after start of dialysis), surgical assessment and access functionality. The combined access audit covered incident haemodialysis (HD) and peritoneal dialysis (PD) patients in 2012 from England, Northern Ireland and Wales. Centres who had reported data on incident PD patients for the previous audit in 2011 were additionally asked to provide one year follow up data for this group. Fifty-one centres in England, Wales and Northern Ireland (representing 82% of all centres) returned data on first access from 3,720 incident HD patients and 1,018 incident PD patients. A strong relationship was seen between surgical assessment and the likelihood of starting HD with an arteriovenous fistula (AVF). Type of first access was related to the length of time known to renal services with higher numbers of AVFs and PD catheters used in patients known to renal services for at least one year. Three month and one year outcomes of HD and PD access were poorly reported. This audit provides information on important patient related outcome measures with the potential to lead to an improvement in access provision. This represents an important advance, however data collection remains suboptimal. There is wide practice variation across the England, Wales and Northern Ireland in provision of both HD and PD access which requires further exploration. © 2014 S. Karger AG, Basel.

  14. Power supply for pumping systems in northern Chile: Photovoltaics as alternative to grid extension and diesel engines

    International Nuclear Information System (INIS)

    Chueco-Fernandez, Francisco J.; Bayod-Rujula, Angel A.

    2010-01-01

    This paper examines and compares the cost-effectiveness to energize pumping systems in remote areas on northern Chile by means of photovoltaic systems, diesel engines and grid extension. Variables such as the distance to the power grid, the voltage grid, the prices of electricity and fuel, and the required investments, are taken into account. The comparison is made for wide range of variable values, distances and pumping requirements. The results obtained are useful for choosing the best alternative for the power supply of pumping systems in wells in Northern Chile. (author)

  15. Institutional profile: the London Centre for Nanotechnology.

    Science.gov (United States)

    Weston, David; Bontoux, Thierry

    2009-12-01

    Located in the London neighborhoods of Bloomsbury and South Kensington, the London Centre for Nanotechnology is a UK-based multidisciplinary research center that operates at the forefront of science and technology. It is a joint venture between two of the world's leading institutions, UCL and Imperial College London, uniting their strong capabilities in the disciplines that underpin nanotechnology: engineering, the physical sciences and biomedicine. The London Centre for Nanotechnology has a unique operating model that accesses and focuses the combined skills of the Departments of Chemistry, Physics, Materials, Medicine, Electrical and Electronic Engineering, Mechanical Engineering, Chemical Engineering, Biochemical Engineering and Earth Sciences across the two universities. It aims to provide the nanoscience and nanotechnology required to solve major problems in healthcare, information processing, energy and the environment.

  16. Engineering NV centres in Synthetic Diamond

    International Nuclear Information System (INIS)

    Matthew Markham

    2014-01-01

    The quantum properties of the nitrogen vacancy (NV) centre in diamond has prompted rapid growth in diamond research. This initial growth was driven by the fact the NV centre provides an 'easy' to manipulate quantum system along with opening up the possibility of a new material to deliver a solid state quantum computer. The NV defect is now moving from a quantum curiosity to a commercial development platform for a range of application such as as gyroscopes, timing and magnetometry as well as the more traditional quantum technologies such as quantum encryption and quantum simulation. These technologies are pushing the development needs of the material, and the processing of that material. The paper will describes the advances in CVD diamond synthesis with special attention to getting NV defects close to the surface of the diamond and how to process the material for diamond quantum optical applications. (author)

  17. The Karlsruhe Nuclear Research Centre is being re-equipped

    International Nuclear Information System (INIS)

    Boehm, H.; Koerting, K.; Huncke, W.; Knapp, W.

    1986-01-01

    The Nuclear Research Centre in Karlsruhe was established over 25 years ago for the express purpose of studying nuclear engineering and its peaceful use. This goal has been achieved - what now. For some time a change has been taking place at the Research Centre: in the direction of man and environmental engineering. 'Bild der Wwissenschaft' has talked to Professor Horst Boehm, the chairman of the Nuclear Centre, about this change and the new areas of research to be concentrated on. (orig.) [de

  18. Plastic ingestion by the northern fulmar (Fulmarus glacialis) in Iceland

    NARCIS (Netherlands)

    Kuehn, S.; Franeker, van J.A.

    2012-01-01

    In 2011, northern fulmars (Fulmarus glacialis) from Iceland were used to test the hypothesis that plastic debris decreases at northern latitudes in the Atlantic when moving away from major human centres of coastal and marine activities. Stomach analyses of Icelandic fulmars confirm that plastic

  19. CANDU 9 Control Centre Mockup

    International Nuclear Information System (INIS)

    Webster, A.; Macbeth, M.J.

    1996-01-01

    This paper provides a summary of the design process being followed, the benefits of applying a systematic design using human factors engineering, presents an overview of the CANDU 9 control centre mockup facility, illustrates the control centre mockup with photographs of the 3D CADD model and the full scale mockup, and provides an update on the current status of the project. (author)

  20. Wind energy centre at Gujarat State, India. Business plan

    International Nuclear Information System (INIS)

    Van Hulle, F.; Jansen, J.C.; Prasad, N.S.; Suresh, R.

    1997-07-01

    The report describes the business plan for the establishment of a Wind Energy Centre in Gujarat. This Wind Energy Center has to provide a reliable delivery of a range of development and technical quality assurance services to the wind energy industry in northern India on the basis of sustained operations and recovery of all operating costs and - contingent on the way the Centre is financed - at least part of the initial investment costs. Core activities of the Wind Energy Centre are: Research and development supporting activities for the wind energy sector; Testing and certification of wind energy equipment; Consultancy, monitoring and information services; and Training courses on wind energy technology and implementation. The wind energy centre aims with its services at a number of customers: the manufacturing industry, wind farm developers and governmental authorities. An exploration of the market for the services of the envisaged wind energy centre shows that the concept is financially viable. A set of assumptions has been made about the growth rate of the installed wind power capacity in Northern India and about the number of wind turbine manufacturing companies in the target area of the centre. From these assumptions the total number of new wind turbine types coming on the Indian market annually is derived for a period of ten years. These figures have served as a basis for the determination of the required manpower and facilities of the centre for design and development support activities, feasibility and siting studies, testing and certification. Furthermore a projection has been made for providing expert manpower capacity for carrying out R and D, consultancy and other services. 14 tabs., 1 ref

  1. UICEE Centre for Problem Based Learning (UCPBL) at Aalborg University

    DEFF Research Database (Denmark)

    Fink, Flemming Kobberøe; Enemark, Stig; Moesby, Egon

    2002-01-01

    University is considered to have a strong position in Problem-Based Learning (PBL) with many years of experience. Within engineering education co-operation with industry has also always been a field of high importance for Aalborg University and part of the PBL concept. An increasing number of universities...... and engineering schools worldwide are consequently seeking consultancy and cooperation with Aalborg University. The establishment of UCPBL is therefore welcomed as a possibility to merge these activities into one organisational structure and to strengthen the effort of improving engineering education......UICEE Centre for Problem-Based Learning (UCPBL) is a global centre for Problem-Based Learning located at Aalborg University, Denmark UCPBL is established as a partner to the UNESCO International Centre for Engineering Education (UICEE) located at Monash University, Melbourne, Australia. Aalborg...

  2. Canadian Meteorological Centre (CMC) Daily Snow Depth Analysis Data, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of a Northern Hemisphere subset of the Canadian Meteorological Centre (CMC) operational global daily snow depth analysis. Data include daily...

  3. Iron anchors of Northern Odisha, east coast India: Maritime contacts with European countries

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Patnaik, S.K.; Acharya, S.B.

    to setup their trade centre at Odisha. Subsequently, the Dutch, French and English came to Odisha for maritime trade. During the end of the 19th century ports of northern Odisha were declined. In order to study the remains of maritime activities of northern...

  4. Human-centred radiological software techniques supporting improved nuclear safety

    International Nuclear Information System (INIS)

    Szoeke, Istvan; Johnsen, Terje

    2013-01-01

    The Institute for Energy Technology (IFE) is an international research foundation for energy and nuclear technology. IFE is also the host for the international OECD Halden Reactor Project. The Software Engineering Department in the Man Technology Organisation at IFE is a leading international centre of competence for the development and evaluation of human-centred technologies, process visualisation, and the lifecycle of high integrity software important to safety. This paper is an attempt to give a general overview of the current, and some of the foreseen, research and development of human-centred radiological software technologies at the Software Engineering department to meet with the need of improved radiological safety for not only nuclear industry but also other industries around the world. (author)

  5. UK Renal Registry 17th Annual Report: Chapter 10 2013 Multisite Dialysis Access Audit in England, Northern Ireland and Wales and 2012 PD One Year Follow-up: National and Centre-specific Analyses.

    Science.gov (United States)

    Rao, Anirudh; Pitcher, David; Fluck, Richard; Kumwenda, Mick

    2015-01-01

    Dialysis access should be timely, minimize complications and maintain functionality. The aim of the second combined vascular and peritoneal dialysis access audit was to examine practice patterns with respect to dialysis access and highlight variations in practice between renal centres. The UK Renal Registry collected centre-specific information on incident vascular and peritoneal dialysis access outcome measures in patients from England, Wales and Northern Ireland (EW&NI), including patient demographics, dialysis access type (at start of dialysis and three months after start of dialysis), surgical assessment and access functionality. Centres who had reported data on incident PD patients for the previous 2012 audit were additionally asked to provide one year follow up data for this group. The findings were compared to the audit measures stated in Renal Association clinical practice guidelines for dialysis access. Fifty-seven centres in EW&NI (representing 92% of all centres) returned data on first access from 3,663 incident HD patients and 1,022 incident PD patients. A strong relationship was seen between surgical assessment and the likelihood of starting HD with an arteriovenous fistula (AVF). Twenty-four centres were at least two standard deviations below the 65% target for incident patients starting haemodialysis on AVF and only eight centres (14%) were within two standard deviations of the 85% target for prevalent haemodialysis patients on AVF. There was wide practice variation across the UK in provision of both HD and PD access which requires further exploration.

  6. Main research activities at the Institute of Energy Process Engineering Research Centre Juelich Germany

    International Nuclear Information System (INIS)

    Achenbach, E.

    1995-06-01

    This report summarizes four lectures been held during the author's seven-week stay at the Department of High Temperature Engineering in the period from February 2nd to March 23rd in 1995 under the JAERI foreign researcher inviting program. Though the Institute of Energy Process Engineering(IEV) in the Research Centre Juelich(KFA), has recently changed the subject of research from nuclear technology of high-temperature gas-cooled reactors(HTGRs) to fuel cell technology, there are many common items of research. In particular, the following topics presented in the lectures are of mutual interest: 1)Methane-steam reforming used at JAERI as HTGR heat utilization system and applied at KFA to internal reforming in the high temperature Solid Oxide Fuel Cell(SOFC), 2)Technology and modeling of high temperature electrolysis at JAERI as the inverse process of the SOFC developed at KFA, 3)Flow simulation of branched systems treated at JAERI for the development of high temperature heat exchangers and performed at KFA with respect to the SOFC manifold system, 4)Fundamental aspects of heat and mass transfer. The report should help to create a basis of discussing the above mentioned problems and to stimulate the research work at JAERI. (author)

  7. DGNB certified Healthcare Centres

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Larsen, Tine Steen

    2015-01-01

    for sustainability and wants a certification. This research investigates the decision‐making and design process (DMaDP) behind four DGNB certified Healthcare Centres (HCC) in Northern Jutland in Denmark. In general, knowledge about the DMaDP is important. However it is important to know what part DGNB plays...... a dialog about DGNB and energy concept is important even before anyone start sketching. Experiences with the different approaches will be further outlined in the paper.Future research has the intention to collect further knowledge about DGNB and DMaDP in practise. This project was limited to Healthcare...

  8. Investigation of the current requirements engineering practices among software developers at the Universiti Utara Malaysia Information Technology (UUMIT) centre

    Science.gov (United States)

    Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Abdullah, Inam

    2016-08-01

    Requirements Engineering (RE) is a systemic and integrated process of eliciting, elaborating, negotiating, validating and managing of the requirements of a system in a software development project. UUM has been supported by various systems developed and maintained by the UUM Information Technology (UUMIT) Centre. The aim of this study was to assess the current requirements engineering practices at UUMIT. The main problem that prompted this research is the lack of studies that support software development activities at the UUMIT. The study is geared at helping UUMIT produce quality but time and cost saving software products by implementing cutting edge and state of the art requirements engineering practices. Also, the study contributes to UUM by identifying the activities needed for software development so that the management will be able to allocate budget to provide adequate and precise training for the software developers. Three variables were investigated: Requirement Description, Requirements Development (comprising: Requirements Elicitation, Requirements Analysis and Negotiation, Requirements Validation), and Requirement Management. The results from the study showed that the current practice of requirement engineering in UUMIT is encouraging, but still need further development and improvement because a few RE practices were seldom practiced.

  9. The nuclear research centre at Bariloche, Argentina

    International Nuclear Information System (INIS)

    Abriata, J.P.

    2001-01-01

    The nuclear research centre at Bariloche (CAB) is one of the four centres under the Atomic Energy Commission of Argentina (CNEA). The research programme of CAB addresses various issues like nuclear reactor development, nuclear fuel and fuel cycle, applications of radioisotopes and radiation, and waste management. There is also a basic nuclear science component. The human resource development in the areas of physics and nuclear engineering is done in an associated Balseiro Institute which has undergraduate and graduate programmes as well as doctoral and postdoctoral research. The Centre interacts well with the society and provides services in the nuclear area. It has a close interaction with the nuclear sector of Argentina as also with many international organisations. Regulatory control over the Centre is carried out by the Nuclear Regulatory Authority of Argentina. (author)

  10. Wind energy centre at Mithapur, Gujarat, India. Technical report

    International Nuclear Information System (INIS)

    Van Hulle, F.; Van der Borg, N.; Prasad, N.S.; Suresh, R.; Rajsekhar, B.

    1997-07-01

    The report describes the design and set-up of a Wind Energy Centre in Gujarat. This Wind Energy Centre has to provide a reliable delivery of a range of development and technical quality assurance services to the wind energy industry in northern India. Infrastructural and organizational requirements of the centre have been defined as per the demands expressed by the industry. This include, site and land, building, equipment - hardware/software, manpower, etc. A suitable site has been identified on the western coast of Gujarat (in the vicinity of Mithapur). Based on the feedback from the industry and keeping in mind the possibilities and state-of-the-art followed in intemationally accepted centres, a range of activities including research and development, support to indigenisation, testing and certification, as well as training have been addressed. Facilities include the following: (1) Test site: test pads, building, roads, power collection system, meteo-towers etc; (2) Mobile test equipment: basic measurement sets, transportable meteo-towers, auxiliary equipment; and (3) Blade test facility: building, foundation, loading and measuring facilities. At full capacity the centre will employ approximately 20 people. 3 figs., 4 tabs

  11. Abstract EPSM-ABEC 2011 Conference

    International Nuclear Information System (INIS)

    2011-01-01

    The Engineering and Physical Science in Medicine and The Australian Biomedical Engineering College Conference, was held at Darwin, Australia from 14 to 18 August, 2011, Darwin Convention Centre, Northern Territory, Australia.

  12. 23rd June 2010 - University of Bristol Head of the Aerospace Engineering Department and Professor of Aerospace Dynamics N. Lieven visiting CERN control centre with Beams Department Head P. Collier, visiting the LHC superconducting magnet test hall with R. Veness and CMS control centre with Collaboration Spokesperson G. Tonelli and CMS User J. Goldstein.

    CERN Multimedia

    Jean-Claude Gadmer

    2010-01-01

    23rd June 2010 - University of Bristol Head of the Aerospace Engineering Department and Professor of Aerospace Dynamics N. Lieven visiting CERN control centre with Beams Department Head P. Collier, visiting the LHC superconducting magnet test hall with R. Veness and CMS control centre with Collaboration Spokesperson G. Tonelli and CMS User J. Goldstein.

  13. The Imperial College Thermophysical Properties Data Centre

    Science.gov (United States)

    Angus, S.; Cole, W. A.; Craven, R.; de Reuck, K. M.; Trengove, R. D.; Wakeham, W. A.

    1986-07-01

    The IUPAC Thermodynamic Tables Project Centre in London has at its disposal considerable expertise on the production and utilization of high-accuracy equations of state which represent the thermodynamic properties of substances. For some years they have been content to propagate this information by the traditional method of book production, but the increasing use of the computer in industry for process design has shown that an additional method was needed. The setting up of the IUPAC Transport Properties Project Centre, also at Imperial College, whose products would also be in demand by industry, afforded the occasion for a new look at the problem. The solution has been to set up the Imperial College Thermophysical Properties Data Centre, which embraces the two IUPAC Project Centres, and for it to establish a link with the existing Physical Properties Data Service of the Institution of Chemical Engineers, thus providing for the dissemination of the available information without involving the Centres in problems such as those of marketing and advertising. This paper outlines the activities of the Centres and discusses the problems in bringing their products to the attention of industry in suitable form.

  14. Sexospécificités | Page 213 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Integrated pest management yields economic and health benefits. Potato farmers in the province of Carchi in northern Ecuador suffer a number of health problems caused by high exposure to chemical insecticides. With funding from Canada's International Development Research Centre (IDRC) and other donors, ...

  15. BrisSynBio: a BBSRC/EPSRC-funded Synthetic Biology Research Centre.

    Science.gov (United States)

    Sedgley, Kathleen R; Race, Paul R; Woolfson, Derek N

    2016-06-15

    BrisSynBio is the Bristol-based Biotechnology and Biological Sciences Research Council (BBSRC)/Engineering and Physical Sciences Research Council (EPSRC)-funded Synthetic Biology Research Centre. It is one of six such Centres in the U.K. BrisSynBio's emphasis is on rational and predictive bimolecular modelling, design and engineering in the context of synthetic biology. It trains the next generation of synthetic biologists in these approaches, to facilitate translation of fundamental synthetic biology research to industry and the clinic, and to do this within an innovative and responsible research framework. © 2016 The Author(s).

  16. The Australian centre for RF bioeffects research (ACRBR) - an NHMRC centre of research excellence

    International Nuclear Information System (INIS)

    Wood, A.; Croft, R.; Abramson, M.; Anderson, V.; Cosic, I.; Finnie, J.; McKenzie, R.

    2004-01-01

    Full text: The Australian Centre for Radiofrequency Bioeffects Research (ACRBR) is a newly established multi-institutional research centre which seeks to research questions pertaining to possible health effects of exposure to radiofrequency devices, such as mobile phones and which is funded under the Australian National Health and Medical Research Council (NHMRC) Centres of Research Excellence funding program. The Centre of Research Excellence in Electromagnetic Energy is combining the efforts of engineers, epidemiologists, physicists, psychophysiologists and veterinary pathologists from RMIT University, the Institute of Medical and Veterinary Science in South Australia (IMVS), Monash University, Swinburne University of Technology and Telstra Research Laboratories (TRL). The centre is funded at $2.5 M over five years and will undertake a program of research to address the issue of exposure to radiofrequency (RF) devices and health. It will also train new scientists, keep the community informed of ongoing developments and help the development of government policies in this area of considerable public concern. The 5-year program has the following components: Neurobiology: One important area where there is a perceived research gap is in the area of potential neurological effects, which will hence be a major focus of this Centre. The proposed studies range from in vitro and in vivo research studies of RF effects on neuron and neural system functioning in rodents, to that of RF effects on simple neural function, cognition and subjective report in humans. The latter series of studies have been developed to account for the consensus view that more emphasis needs to be placed on possible differences in RF population sensitivity (e.g. youth versus aged, and ' electromagnetic hypersensitives'). Epidemiological studies are an important tool in studying the impact on public health from exposure of whole populations to modern radio technologies. Cancer outcomes in this area of

  17. The economic contribution of the Northern Ontario School of Medicine to communities participating in distributed medical education.

    Science.gov (United States)

    Hogenbirk, John C; Robinson, David R; Hill, Mary Ellen; Pong, Raymond W; Minore, Bruce; Adams, Ken; Strasser, Roger P; Lipinski, Joe

    2015-01-01

    The economic contribution of medical schools to major urban centres can be substantial, but there is little information on the contribution to the economy of participating communities made by schools that provide education and training away from major cities and academic health science centres. We sought to assess the economic contribution of the Northern Ontario School of Medicine (NOSM) to northern Ontario communities participating in NOSM's distributed medical education programs. We developed a local economic model and used actual expenditures from 2007/08 to assess the economic contribution of NOSM to communities in northern Ontario. We also estimated the economic contribution of medical students or residents participating in different programs in communities away from the university campuses. To explore broader economic effects, we conducted semistructured interviews with leaders in education, health care and politics in northern Ontario. The total economic contribution to northern Ontario was $67.1 million based on $36.3 million in spending by NOSM and $1.0 million spent by students. Economic contributions were greatest in the university campus cities of Thunder Bay ($26.7 million) and Sudbury ($30.4 million), and $0.8-$1.2 million accrued to the next 3 largest population centres. Communities might realize an economic contribution of $7300-$103 900 per pair of medical learners per placement. Several of the 59 interviewees remarked that the dollar amount could be small to moderate but had broader economic implications. Distributed medical education at the NOSM resulted in a substantial economic contribution to participating communities.

  18. Description of the Nuclear Training Centre

    International Nuclear Information System (INIS)

    Wagadarikar, V.K.

    1974-01-01

    The Department of Atomic Energy, Government of India has developed an on-going programme for constructing and operating heavy water moderated, natural uranium fuelled power stations of the CANDU-type. With the view to train personnel required for operation and maintenance of these stations, a Nuclear Training Centre has been set up at the site of the Rajasthan Atomic Power Station. A description of the nuclear training centre with its facilities is given. The training programme for engineers, operators, mechanical, electrical and control maintainers etc. is given in detail, along with the actual syllabi for respective courses. Examples of the typical field check list are provided. (K.B.)

  19. Effects of extreme global warming in Northern Europe

    DEFF Research Database (Denmark)

    Drews, Martin; Christensen, Jens Hesselbjerg

    2015-01-01

    In this Climate Research (CR) Special, the Centre for Regional Change in the Earth System (CRES) brings together scientific expertise (ranging from climate to social sciences) with practitioners and stakeholders to present thematic research addressing gaps in (1) our understanding of climate-syst...... in this CR Special highlight potential effects of extreme global warming with a focus on Denmark and northern Europe....

  20. Cross currents : hydroelectricity and the engineering of northern Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Manore, J.L. [Calgary Univ., AB (Canada)

    1999-05-01

    The history of hydroelectric development in northern Ontario was reviewed and analysed with special emphasis on the developments along the Mattagami and Abitibi Rivers. The objective was to examine the important factors that shaped modern hydroelectric development in Canada. System builders, the privately owned Nesbitt Thomson Company, the publicly owned Hydro Electric Power Corporation of Ontario and the eventual evolution of the single power system under Ontario Hydro are chronicled. Broad historical themes such as the technological impacts, regionalism, indigenous rights, plus environmental and economic issues are examined, in addition to an appreciation of the importance of electricity in the manufacturing sector of Ontario, the impact of hydroelectric development on the northern environment and on the northern First Nations, who rely on rivers for their subsistence. Until fairly recently, government policies and interpretations of law often excluded the recognition of Aboriginal uses of river systems, thereby limiting First Nations` peoples ability to practice traditional ways of life. In essence, the book is an account of how the northeastern power system in Ontario shaped the social, political and natural environments and how the development of northeastern power sources by southern power developers shaped the regional interactions between Ontario`s north and south. refs., figs.

  1. Cross currents : hydroelectricity and the engineering of northern Ontario

    International Nuclear Information System (INIS)

    Manore, J.L.

    1999-01-01

    The history of hydroelectric development in northern Ontario was reviewed and analysed with special emphasis on the developments along the Mattagami and Abitibi Rivers. The objective was to examine the important factors that shaped modern hydroelectric development in Canada. System builders, the privately owned Nesbitt Thomson Company, the publicly owned Hydro Electric Power Corporation of Ontario and the eventual evolution of the single power system under Ontario Hydro are chronicled. Broad historical themes such as the technological impacts, regionalism, indigenous rights, plus environmental and economic issues are examined, in addition to an appreciation of the importance of electricity in the manufacturing sector of Ontario, the impact of hydroelectric development on the northern environment and on the northern First Nations, who rely on rivers for their subsistence. Until fairly recently, government policies and interpretations of law often excluded the recognition of Aboriginal uses of river systems, thereby limiting First Nations' peoples ability to practice traditional ways of life. In essence, the book is an account of how the northeastern power system in Ontario shaped the social, political and natural environments and how the development of northeastern power sources by southern power developers shaped the regional interactions between Ontario's north and south. refs., figs

  2. The Management Advisory Committee of the Inspection Validation Centre - fifth report

    International Nuclear Information System (INIS)

    1988-07-01

    The Management Advisory Committee of the Inspection Validation Centre (IVC/MAC) was set up by the Chairman of the UKAEA early in 1983 with terms of reference to review the policy, scope, procedure and operation of the Inspection Validation Centre, to supervise its operation and to advise and report to the UKAEA appropriately. The Inspection Validation Centre (IVC) has been established at the UKAEA Northern Research Laboratories, Risley for the purpose of validating the procedures, equipment and personnel proposed by the CEGB for use in the ultrasonic inspection at various stages of the fabrication, erection and operation of the CEGB's PWR reactor pressure vessel and such other components as are identified by the CEGB. This report, for 1987/8, states that the IVC has continued to make progress in the provision of the validation services as specified. (author)

  3. The role of the University of Calgary in the development of a centre of excellence in petroleum technology

    International Nuclear Information System (INIS)

    Moore, G.; Chakma, A.

    1996-01-01

    The role of the University of Calgary's Department of Chemical and Petroleum Engineering in developing a world centre of excellence in petroleum engineering in Calgary, was discussed. Reasons for the failure of previous efforts to establish a Department of Petroleum Engineering at the University were explained. High participation levels in the existing Department of Chemical and Petroleum Reservoir Engineering's water-flooding, and reservoir engineering programs were noted. Support for the development of a centre of excellence in petroleum engineering from government and industry, with specific reference to the the recently instituted, government sponsored, ACCESS program, was described. Problems in maintaining a University Faculty with a wide range of petroleum expertise were noted. Current plans for the development of a Conjoint Centre of Applied Petroleum Technology in conjunction with the Southern Alberta Institute of Technology were described. The joint effort between the two institutions appeared to be the most promising avenue to date to realize the dream of Calgary as a world center of excellence in petroleum engineering, preparing future workers in the petroleum industry at all levels, from technologists to post-doctoral fellows

  4. UK Renal Registry 18th Annual Report: Chapter 11 2014 Multisite Dialysis Access Audit in England, Northern Ireland and Wales and 2013 PD One Year Follow-up: National and Centre-specific Analyses.

    Science.gov (United States)

    Rao, Anirudh; Evans, Rebecca; Wilkie, Martin; Fluck, Richard; Kumwenda, Mick

    2016-01-01

    Data are presented from the third combined vascular and peritoneal dialysis access audit. In 2014, 53 centres in England, Wales and Northern Ireland (out of 62) returned data on first access from 4,339 incident haemodialysis (HD) patients and 1,090 incident peritoneal dialysis (PD) patients. Of the 5,429 incident patients, 20.1% started dialysis on PD, 27.8% started with an arteriovenous fistula (AVF), 1.0% with an arteriovenous graft (AVG), 27.1% on a tunnelled line (TL) and 24.0% on a non-tunnelled line (NTL). Older patients (565 years) were more likely to start haemodialysis using AVF compared to their younger counterparts (36.2% vs. 32.8%). Thirteen of the nineteen centres (68%) using the physician led percutaneous insertion technique had over 20% of their incident patients starting on PD when compared to only seven out of fourteen centres (50%) which used single technique (open surgical or laparoscopic) for their PD catheter insertion. Wide variations were apparent between centres for use of AVF as the first haemodialysis access ranging from 10–54%. Eight of the 49 centres were achieving close to the 65% target for AV fistula in their incident patients. Length of time known to nephrology services and likelihood of commencing dialysis using either an AVF or a PD catheter are strongly associated. Patients who were known to a nephrologist for over one year were more likely to start dialysis with AVF, as compared to those who were referred between 90–365 days (39.2% vs. 24.6%). Similarly, patients who were known to a nephrologist between 90 days and one year were more likely to start on PD when compared to patients who were referred report demonstrates wide variations in practice between centres across several domains in the provision of dialysis access and further work will be required to understand the underlying reasons.

  5. A model for facilitating translational research and development in China: Call for establishing a Hong Kong Branch of the Chinese National Engineering Research Centre for Biomaterials

    Directory of Open Access Journals (Sweden)

    Liming Bian

    2014-10-01

    Full Text Available With significant improvements in living standards in China and the aging population that accompanies these improvements, the market demand for high-quality orthopaedic biomaterials for clinical applications is tremendous and growing rapidly. There are major efforts to promote cooperation between different scientific institutes with complementary strengths for the further development of the biomaterial industry in China to achieve the technological level of developed countries. An excellent example is that the Ministry of Science and Technology of the People's Republic of China (MOST; Beijing, China established the Chinese National Engineering Research Centres (CNERCs, which serve as a major initiative in driving basic and applied technological research and development (R&D in mainland China. To create a win-win situation with Hong Kong, the MOST and the Hong Kong Innovation and Technology Commission are jointly establishing the Hong Kong Branch of the CNERCs. Through an amicable arrangement, the Chinese University of Hong Kong (CUHK; Shatin, Hong Kong and the Chinese National Engineering Research Centre for Biomaterials (i.e., Main Centre in Chengdu, People's Republic of China have decided to apply to establish the Hong Kong Branch of the CNERC for Biomaterials at the CUHK. The effort in establishing the Hong Kong Branch of Biomaterials seeks to promote further collaboration with the Main Centre with the goals of promoting synergy and a win-win cooperation between mainland China and Hong Kong in scientific research, talent cultivation, clinically driven novel biomaterials product design, and preclinical and clinical testing. It will thus become a model for the successful collaboration between the Hong Kong research institutions and the mainland CNERCs in the area of biomaterials. Such initiatives will facilitate close collaboration in translational medicine associated with biomaterial development and application.

  6. 19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

  7. Pattern of psychoactive substance use in the northern region of ...

    African Journals Online (AJOL)

    Pattern of psychoactive substance use in the northern region of Nigeria. ... African Journal of Drug and Alcohol Studies ... The purpose of this study was to assess the pattern of psychoactive substance use among inmates at Kiru Rehabilitation Centre, Kano in the North Central Region of Nigeria, to determine the extent of ...

  8. Proposal for an ecoradiological centre model

    International Nuclear Information System (INIS)

    Perovic, S.M.; Zunic, Z.; Demajo, M.; Konjevic, N.

    1998-01-01

    The problem of establishing an optimal Ecoradiological Centre Model is studied in some detail for the town of Kotor which is under the protection of the World Cultural and Natural Heritage. The proposed structure of the Centre is analyzed from the view of Engineering, Education and Scientific parameters. This Model is suitable for implementation as a network Centre Model for the state of Montenegro. Further, the modelling strategy of the ecoradiological condition control of natural, construction, bio and technological systems is elaborated. The proposal includes the ecoradiological monitoring, radioactive and electromagnetic radiation processing and protection for different natural zones as well as their different geostructures, aerial and hydrogeological conditions. The programme also includes all housing objects (hotels, flats, houses, office premises etc.). Here will also be presented the radiation protection and recommendations for the implementation of Title VII of the European Basic Safety Standards Directive (BSS), concerning significant increase in exposure due to natural radiation sources. Also, the proposal of Local Radiation Protection for the town of Kotor is presented. Our proposal for an Ecoradiological Centre Model presented here is in a form of a pilot programme, applicable also for other towns and states. (author)

  9. Spatial and temporal distribution of rabies in the northern zone of ...

    African Journals Online (AJOL)

    A retrospective study was carried out to investigate the occurrence and distribution patterns of rabies cases in northern Tanzania. Data on laboratory confirmed brain samples and associated case reports submitted to the Arusha Veterinary Investigation Centre, for a period of ten years (1993-2002) was retrieved and ...

  10. IAEA establishes International Seismic Safety Centre

    International Nuclear Information System (INIS)

    2008-01-01

    Full text: The IAEA today officially inaugurated an international centre to coordinate efforts for protecting nuclear installations against the effects of earthquakes. The International Seismic Safety Centre (ISSC), which has been established within the IAEA's Department of Nuclear Safety and Security, will serve as a focal point on seismic safety for nuclear installations worldwide. ISSC will assist countries on the assessment of seismic hazards of nuclear facilities to mitigate the consequences of strong earthquakes. 'With safety as our first priority, it is vital that we pool all expert knowledge available worldwide to assist nuclear operators and regulators to be well prepared for coping with major seismic events,' said Antonio Godoy, Acting Head of the IAEA's Engineering Safety Section and leader of the ISSC. 'The creation of the ISSC represents the culmination of three decades of the IAEA's active and recognized involvement in this matter through the development of an updated set of safety standards and the assistance to Member States for their application.' To further seismic safety at nuclear installations worldwide, the ISSC will: - Promote knowledge sharing among the international community in order to avoid or mitigate the consequences of extreme seismic events on nuclear installations; - Support countries through advisory services and training courses; and - Enhance seismic safety by utilizing experience gained from previous seismic events in member states. The centre is supported by a scientific committee of high-level experts from academic, industrial and nuclear safety authorities that will advise the ISSC on implementation of its programme. Experts have been nominated from seven specialized areas, including geology and tectonics, seismology, seismic hazard, geotechnical engineering, structural engineering, equipment, and seismic risk. Japan and the United States have both contributed initial funds for creation of the centre, which will be based at

  11. Professor Sir Mark Walport Government Chief Scientific Adviser Head of Government Science and Engineering Profession Chief Executive Designate of UK Research and Innovation United Kingdom of Great Britain and Northern Ireland

    CERN Multimedia

    Bennett, Sophia Elizabeth

    2017-01-01

    Professor Sir Mark Walport Government Chief Scientific Adviser Head of Government Science and Engineering Profession Chief Executive Designate of UK Research and Innovation United Kingdom of Great Britain and Northern Ireland

  12. Sylvain Dufour | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... European Initiatives; Special Advisor to the President, and Senior Program Officer, Earth Sciences. Previously, he was Northern Region Manager for Geocon Inc. in Calgary and Yellowknife. He is a member of the Order of Engineers of Québec, and a member of the Order of Chartered Professional Accountants of Québec.

  13. Expose Mechanical Engineering Students to Biomechanics Topics

    Science.gov (United States)

    Shen, Hui

    2011-01-01

    To adapt the focus of engineering education to emerging new industries and technologies nationwide and in the local area, a biomechanics module has been developed and incorporated into a mechanical engineering technical elective course to expose mechanical engineering students at ONU (Ohio Northern University) to the biomedical engineering topics.…

  14. THE ELUSIVENESS OF LEARNER-CENTRED TEACHING

    Directory of Open Access Journals (Sweden)

    Ervin Kovačević

    2016-03-01

    Full Text Available This research will explore teaching styles of university professors. Teaching style is an umbrella term for teaching decisions made during the entire teaching process – planning, delivery, and evaluation. Contemporary university teachers are advised to adopt the learner-centred teaching style which is assumed to produce remarkable possibilities. In the Fall Semester 2015 fifty-two respondents in different faculties of International University of Sarajevo were surveyed using The Principles of Adult Learning Scale inventory designed by Gary J. Conti. Inventory scores were calculated according to guidelines suggested by the author of the inventory. The scores revealed that majority of respondents strongly supported teacher-centred rather than learner-centred styles of instruction. Scores were analysed on gender lines and across three different faculties, namely: Arts and Social Sciences; Business and Administration; Engineering and Natural Sciences. In all five groups none of the seven teaching style indicators was found to conform with the learner-centred teaching criteria. There was no statistically significant difference between the two genders’ preference for a teaching style. And there was no statistically significant difference between teaching style preference across the three different faculties.The results of this research imply that the learner-centred style of instruction is not frequently implemented. Secondly, the results indicate that the requirements necessary for proper application of the learner-centred teaching style are not easy to meet in current written and unwritten norms. Finally, the results show that traditional teaching styles, which have been preserved in different scientific fields, still predominate in universities.

  15. The Role of Mathematics Learning Centres in Engineering Education.

    Science.gov (United States)

    Fuller, Milton

    2002-01-01

    Points out the diminishing demand for mathematics undergraduate programs and the strong trend in engineering education to make greater use of computer coursework such as Mathcad, Matlab, and other software systems for the mathematical and statistical components of engineering programs. Describes the changing role of mathematics learning centers…

  16. Child Abuse in Northern Sri Lanka.

    Science.gov (United States)

    Sathiadas, M G; Mayoorathy, S; Varuni, K; Ranganathan, Shalini Sri

    2017-02-01

    To identify areas of deficiencies and gaps in child protection services in Northern Sri Lanka. Also, to help in recommending strategies, programmes of interventions for addressing issues of child abuse and advice the legal system. A retrospective study was done to determine the socio-demographic details, type of abuse, clinical profile, relationship of the perpetrator and nature of abuse among children admitted to a tertiary care centre from 2009 through 2014, a period after cessation of a 60-y conflict. Data were obtained from hospital based records and records maintained at the district probation office. Seven hundred twenty cases were referred to the tertiary care centre with abuse. Majority of the children were from the Jaffna district, the northern city of the war affected area and mean age of the children affected was 14.5 ± 2.6 y. Females were affected more than the males and 352 children were seen following sexual abuse. The clinical examination showed penetrative injury in 15 %. The perpetrator was known in 70 % of the situations and the victim was coerced into a relationship for abuse. Attempted suicide was seen in significant numbers during the immediate post war period and school dropout and delinquent behaviour was seen in later years. The problem of child abuse is considerable in this region and there is an urgent need to strengthen the services offered to the victims. Urgent steps are needed to safeguard these children, especially in the war affected areas.

  17. Assuring measurement quality in person-centred healthcare

    Science.gov (United States)

    Pendrill, L. R.

    2018-03-01

    Is it realistic to aspire to the same kind of quality-assurance of measurement in person-centred care, currently being implemented in healthcare globally, as is established in the physical sciences and engineering? Ensuring metrological comparability (‘traceability’) and reliably declaring measurement uncertainty when assessing patient ability or increased social capital are however challenging for subjective measurements often characterised by large dispersion. Drawing simple analogies between ‘instruments’ in the social sciences—questionnaires, ability tests, etc—and engineering instruments such as thermometers does not go far enough. A possible way forward, apparently equally applicable to both physical and social measurement, seems to be to model inferences in terms of performance metrics of a measurement system. Person-centred care needs person-centred measurement and a full picture of the measurement process when man acts as a measurement instrument is given in the present paper. This complements previous work by presenting the process, step by step, from the observed indication (e.g. probability of success, P success, of achieving a task), through restitution with Rasch measurement theory, to the measurand (e.g. task difficulty). Rasch invariant measure theory can yield quantities—‘latent’ (or ‘explanatory’) variables such as task challenge or person ability—with characteristics akin to those of physical quantities. Metrological references for comparability via traceability and reliable estimates of uncertainty and decision risks are then in reach even for perceptive measurements (and other qualitative properties). As a case study, the person-centred measurement of cognitive ability is examined, as part of the EU project EMPIR 15HLT04 NeuroMet, for Alzheimer’s, where better analysis of correlations with brain atrophy is enabled thanks to the Rasch metrological approach.

  18. Training centres in Latin America

    International Nuclear Information System (INIS)

    1959-01-01

    least one integrated atomic energy training centre should be established completely equipped with all the special facilities which are characteristic and essential to such an establishment. Approximate cost of the facilities $40000000; annual budget $7 500 000. Staff required: 250 scientists and engineers, approximately 500 supporting personnel and possibly 450 administrative and operating personnel

  19. Training centres in Latin America

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-04-15

    least one integrated atomic energy training centre should be established completely equipped with all the special facilities which are characteristic and essential to such an establishment. Approximate cost of the facilities $40000000; annual budget $7 500 000. Staff required: 250 scientists and engineers, approximately 500 supporting personnel and possibly 450 administrative and operating personnel

  20. The phylogeographical history of the Iberian steppe plant Ferula loscosii (Apiaceae): a test of the abundant-centre hypothesis.

    Science.gov (United States)

    Pérez-Collazos, E; Sanchez-Gómez, P; Jiménez, F; Catalán, P

    2009-03-01

    The geology and climate of the western Mediterranean area were strongly modified during the Late Tertiary and the Quaternary. These geological and climatic events are thought to have induced changes in the population histories of plants in the Iberian Peninsula. However, fine-scale genetic spatial architecture across western Mediterranean steppe plant refugia has rarely been investigated. A population genetic analysis of amplified fragment length polymorphism variation was conducted on present-day, relict populations of Ferula loscosii (Apiaceae). This species exhibits high individual/population numbers in the middle Ebro river valley and, according to the hypothesis of an abundant-centre distribution, these northern populations might represent a long-standing/ancestral distribution centre. However, our results suggest that the decimated southern and central Iberian populations are more variable and structured than the northeastern ones, representing the likely vestiges of an ancestral distribution centre of the species. Phylogeographical analysis suggests that F. loscosii likely originated in southern Spain and then migrated towards the central and northeastern ranges, further supporting a Late Miocene southern-bound Mediterranean migratory way for its oriental steppe ancestors. In addition, different glacial-induced conditions affected the southern and northern steppe Iberian refugia during the Quaternary. The contrasting genetic homogeneity of the Ebro valley range populations compared to the southern Iberian ones possibly reflects more severe bottlenecks and subsequent genetic drift experienced by populations of the northern Iberia refugium during the Pleistocene, followed by successful postglacial expansion from only a few founder plants.

  1. Scientific and technical publications of Juelich Research Centre, January 1988-June 1992

    International Nuclear Information System (INIS)

    1992-01-01

    The scientific and technical publications of Juelich Research Centre from January 1988 through June 1992 are listed under the following headings: General publications; Mathematics, computers, cybernetics; General physics; Atomic and nuclear physics; Solid state physics; Materials; Analytical chemistry; Engineering; Reactor Engineering; Metrology; Biology; Biotechnology; Agriculture; Energy; Medicine; Ecology; Plasma physics and fusion reactor technology; Physico-chemistry; Nuclear chemistry and radiochemistry; Chemical engineering; Electrical engineering, electronics; Geosciences. There is an author's index with report numbers (JUEL-, JUEL-BIBL-, JUEL-CONF, JUEL-SPEZ). (orig./BBR) [de

  2. Report on the IAEA advisory group meeting on network of nuclear reaction data centres

    Energy Technology Data Exchange (ETDEWEB)

    Pronyaev, V G; Schwerer, O [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria)

    2000-08-01

    This report summarizes the IAEA Advisory Group Meeting (AGM) on Network of Nuclear Reaction Data Centres, hold at the Institute of Physics and Power Engineering, Obninsk, Russia, 15 to 19 May 2000. The meeting was attended by 28 participants from 13 co-operating data centres from seven Member States and two International Organizations. The report contains a meeting summary, the conclusions and actions, progress and status reports of the participating data centres and working papers considered at the meeting. (author)

  3. Jacobs Engineering Group Inc. receives architectural and engineering design contract from Stanford Linear Accelerator Centre

    CERN Multimedia

    2004-01-01

    "Jacobs Engineering Group Inc. announced that a subsidiary company won a contract from Stanford Linear Accelerator Center (SLAC), to provide architectural and engineering design services for the Linac Coherent Light Source (LCLS) conventional facilities" (1/2 page)

  4. Active Learning in Engineering Education: A (Re)Introduction

    Science.gov (United States)

    Lima, Rui M.; Andersson, Pernille Hammar; Saalman, Elisabeth

    2017-01-01

    The informal network "Active Learning in Engineering Education" (ALE) has been promoting Active Learning since 2001. ALE creates opportunity for practitioners and researchers of engineering education to collaboratively learn how to foster learning of engineering students. The activities in ALE are centred on the vision that learners…

  5. An Introduction to Sustainable Development in the Engineering Curriculum

    OpenAIRE

    Penlington, Roger; Steiner, Simon

    2014-01-01

    This resource was originally created by The Higher Education Academy Engineering Subject Centre. Authored by Roger Penlington and Simon Steiner, the Guide has been updated and is now released by the Centre for Engineering and Design Education at Loughborough University [http://cede.lboro.ac.uk] as an online resource with a companion resource compendium. This guide is intended to stimulate thought and consideration amongst those who: as members of teaching staff, may wish to introduce EngSD in...

  6. Mutual aid: native employment centre swings into action with help from industry

    International Nuclear Information System (INIS)

    Lorenz, A.

    1998-01-01

    Establishment of the First Nations Employment and Training Centre on the Tsuu Tina Reserve, near Calgary, was recently announced by the Indian Resource Council, an organization that represents most of Canada's oil and gas producing tribes. The Centre is a result of cooperation between the Council and the Canadian Association of Petroleum Producers (CAPP). Its objective is to identify training needs in the industry and then deliver the training commensurate with those needs. It will maintain a database of employment information, serve as a referral agency and work towards the overall goal of self-sufficiency. The training centre will be the hub of a wheel from which training programs at various First Nations colleges and reserves will branch off. Resources and expertise will be provided by the Southern Alberta Institute of Technology and the Petroleum Industry Training Service. Interest in the new Centre is high as more than 50 inquiries have been received in the first week following the announcement. Self-sufficiency is high on the Indian Resources Council's agenda. Not surprisingly, the new employment and training centre is seen as an important first step towards building a skilled work force that will, in due course, lead to self-sufficiency. The intensive consultation between First Nations leaders and industry representatives that preceded the establishment of the Centre is also expected to improve relations between the sometimes contradictory interests of industry and First Nations in the resource-rich countryside of western and northern Canada

  7. Laser writing of coherent colour centres in diamond

    Science.gov (United States)

    Chen, Yu-Chen; Salter, Patrick S.; Knauer, Sebastian; Weng, Laiyi; Frangeskou, Angelo C.; Stephen, Colin J.; Ishmael, Shazeaa N.; Dolan, Philip R.; Johnson, Sam; Green, Ben L.; Morley, Gavin W.; Newton, Mark E.; Rarity, John G.; Booth, Martin J.; Smith, Jason M.

    2017-02-01

    Optically active point defects in crystals have gained widespread attention as photonic systems that could be applied in quantum information technologies. However, challenges remain in the placing of individual defects at desired locations, an essential element of device fabrication. Here we report the controlled generation of single negatively charged nitrogen-vacancy (NV-) centres in diamond using laser writing. Aberration correction in the writing optics allows precise positioning of the vacancies within the diamond crystal, and subsequent annealing produces single NV- centres with a probability of success of up to 45 ± 15%, located within about 200 nm of the desired position in the transverse plane. Selected NV- centres display stable, coherent optical transitions at cryogenic temperatures, a prerequisite for the creation of distributed quantum networks of solid-state qubits. The results illustrate the potential of laser writing as a new tool for defect engineering in quantum technologies, and extend laser processing to the single-defect domain.

  8. 7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

  9. WISB: Warwick Integrative Synthetic Biology Centre.

    Science.gov (United States)

    McCarthy, John

    2016-06-15

    Synthetic biology promises to create high-impact solutions to challenges in the areas of biotechnology, human/animal health, the environment, energy, materials and food security. Equally, synthetic biologists create tools and strategies that have the potential to help us answer important fundamental questions in biology. Warwick Integrative Synthetic Biology (WISB) pursues both of these mutually complementary 'build to apply' and 'build to understand' approaches. This is reflected in our research structure, in which a core theme on predictive biosystems engineering develops underpinning understanding as well as next-generation experimental/theoretical tools, and these are then incorporated into three applied themes in which we engineer biosynthetic pathways, microbial communities and microbial effector systems in plants. WISB takes a comprehensive approach to training, education and outreach. For example, WISB is a partner in the EPSRC/BBSRC-funded U.K. Doctoral Training Centre in synthetic biology, we have developed a new undergraduate module in the subject, and we have established five WISB Research Career Development Fellowships to support young group leaders. Research in Ethical, Legal and Societal Aspects (ELSA) of synthetic biology is embedded in our centre activities. WISB has been highly proactive in building an international research and training network that includes partners in Barcelona, Boston, Copenhagen, Madrid, Marburg, São Paulo, Tartu and Valencia. © 2016 The Author(s).

  10. Sustainability in Design Engineering Education; Experiences in Northern Europe

    NARCIS (Netherlands)

    Dewulf, K.; Wever, R.; Boks, C.; Bakker, C.; D'hulster, F.

    2009-01-01

    In recent years, the implementation of sustainability into the curricula of engineering has become increasingly important. This paper focuses on the experiences of integrating sustainability in Design Engineering education in the academic bachelor programs at Delft University of Technology in The

  11. Proceedings of the Scientific Meeting in Nuclear Instrumentation Engineering

    International Nuclear Information System (INIS)

    Achmad Suntoro; Rony Djokorayono; Ferry Sujatno; Utaja

    2010-11-01

    The Proceeding of the Scientific Meeting in Nuclear Instrumentation Engineering held on Nov, 30, 2010 by the Centre for Nuclear Instrumentation Engineering - National Nuclear Energy Agency. The Proceedings of the Scientific Contains 40 papers Consist of Nuclear Instrumentation Engineering for Industry, Environment, and Nuclear Facilities. (PPIKSN)

  12. Decomobil, Deliverable 3.6, Human Centred Design for Safety Critical Transport Systems

    OpenAIRE

    PAUZIE, Annie; MENDOZA, Lucile; SIMOES, Anabela; BELLET, Thierry; MOREAU, Fabien

    2014-01-01

    The scientific seminar on 'Human Centred Design for Safety Critical Transport Systems' organized in the framework of DECOMOBIL has been held the 8th of September 2014 in Lisbon, Portugal, hosted by ADI/ISG. The aims of the event were to present the scientific problematic related to the safety of the complex transport systems and the increasing importance of human-­centred design, with a specific focus on Resilience Engineering concept, a new approach to safety management in highly complex sys...

  13. Master's degree in nuclear engineering by videotaped courses

    International Nuclear Information System (INIS)

    Corradini, M.L.; Vogelsang, W.F.

    1991-01-01

    In 1986, a group of northern midwest utilities met with faculty from the nuclear engineering department at the University of Wisconsin (UW) to discuss the possibility of offering graduate courses by videotape for academic credit and earning a master's degree. Four years later, two utility employees from Northern States Power (NSP) and Wisconsin Electric Power Companies (WEPCO) graduated from the University of Wisconsin with master's degrees earned entirely by taking videotape graduate courses at their individual nuclear power plant sites. Within these 4 years, more than a dozen videotaped graduate courses were developed by the faculty of the department in a formalized master's degree program in nuclear engineering and engineering physics. This paper outlines the program's development and its current features

  14. Environmental gamma radiation levels around various DAE research centres

    International Nuclear Information System (INIS)

    Takale, R.A.; Swarnakar, M.; Shetty, P.G.; Sahu, S.K.; Pandit, G.G.

    2014-01-01

    This paper presents the gamma radiation levels of four research centres viz. Bhabha Atomic Research Centre (BARC), Trombay; Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam; Variable Energy Cyclotron Centre (VECC), Kolkata; Raja Ramanna Centre for Advanced Technology (RRCAT), Indore; and an industry Board of Radiation and Isotope Technology (BRIT), Vashi. BARC is India's premier nuclear research facility and is a multi-disciplinary research centre with extensive infrastructure for advanced research and development (R and D). IGCAR, Kalpakkam is engaged in scientific research and advanced engineering programme towards the development of Fast Breeder Reactor technology. VECC Kolkata is dedicated to carry out frontier R and D in the fields of Accelerator Science and Technology, Nuclear Science (Theoretical and Experimental), and Material Science etc. RRCAT, Indore has rapidly grown into a premier institute for R and D in lasers, accelerators and their applications. BRIT, Vashi unit is involved in production, development, and supply of radioisotope based products and provision of isotope applications, radiation processing, radio analytical services etc. With an objective to keep a watch on the prevailing environmental background gamma radiation level around all the DAE installations, routine monitoring programme are being carried out using the Thermo Luminescent Dosimeters (TLDs). TLDs provide the simple, inexpensive and precise measurement of small, integrated, external gamma radiation dose rate. The general practice of this programme is to observe the outdoor gamma radiation levels. This paper summarizes the methodology and gamma radiation levels of four research centres viz. BARC, IGCAR, VECC, RRCAT and an industry BRIT, Vashi

  15. Northern perspectives on medical elective tourism: a qualitative study

    Science.gov (United States)

    Coke, Sarah; Kuper, Ayelet; Richardson, Lisa; Cameron, Anita

    2016-01-01

    Background: The Royal College of Physicians and Surgeons of Canada recognizes education to be necessary for doctors to provide culturally safe care. Communities in northern Canada have large populations of Aboriginal people and other marginalized groups. Our goal was to identify the elements of appropriate predeparture curricula for these medical trainees. Methods: We conducted our study in Kenora, Ontario. With the help of a core collaborative group and the support of the local Aboriginal Health Access Centre, we interviewed a purposive sample of community members about their interactions with trainees from southern Canada. Aboriginal and non-Aboriginal researchers with roots in northern and southern Canada brought perspectives to the inductive analysis. Results: We conducted 17 semistructured interviews between February and March 2014. Participants felt that southern trainees were inadequately educated in northern politics, society and history. They identified 2 more themes: determinants of health affecting the local Aboriginal population, and provider and patient factors affecting delivery of culturally competent care. Participants also shared ideas on how best to implement this content into curricula. Interpretation: Providing culturally competent care to northern communities is a complex process requiring education. Using a collaborative method, we were able to delineate the experiences of members of a northern community and identify knowledge gaps of southern trainees travelling there. Our results provide a foundation for the content and structure of formal predeparture curricula to enable such trainees to provide culturally safe care. PMID:27398374

  16. Northern perspectives on medical elective tourism: a qualitative study.

    Science.gov (United States)

    Coke, Sarah; Kuper, Ayelet; Richardson, Lisa; Cameron, Anita

    2016-01-01

    The Royal College of Physicians and Surgeons of Canada recognizes education to be necessary for doctors to provide culturally safe care. Communities in northern Canada have large populations of Aboriginal people and other marginalized groups. Our goal was to identify the elements of appropriate predeparture curricula for these medical trainees. We conducted our study in Kenora, Ontario. With the help of a core collaborative group and the support of the local Aboriginal Health Access Centre, we interviewed a purposive sample of community members about their interactions with trainees from southern Canada. Aboriginal and non-Aboriginal researchers with roots in northern and southern Canada brought perspectives to the inductive analysis. We conducted 17 semistructured interviews between February and March 2014. Participants felt that southern trainees were inadequately educated in northern politics, society and history. They identified 2 more themes: determinants of health affecting the local Aboriginal population, and provider and patient factors affecting delivery of culturally competent care. Participants also shared ideas on how best to implement this content into curricula. Providing culturally competent care to northern communities is a complex process requiring education. Using a collaborative method, we were able to delineate the experiences of members of a northern community and identify knowledge gaps of southern trainees travelling there. Our results provide a foundation for the content and structure of formal predeparture curricula to enable such trainees to provide culturally safe care.

  17. Sri Lanka : tous les projets | Page 5 | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sujet: Internet, LANGUAGE BARRIER, ASIAN LANGUAGES, COMPUTER PROGRAMS, SOFTWARE ENGINEERING, INFORMATION SOCIETY. Région: ... Les télécentres et autres projets locaux de technologies de l'information et de la communication (TIC) ont connu une croissance exceptionnelle au Sri Lanka. Date de ...

  18. The metallurgy, science and engineering

    International Nuclear Information System (INIS)

    Pineau, A.; Quere, Y.

    2011-01-01

    Metallurgy, the science of metals and the technical discipline concerned with the production, shaping and assembling of metals, is one of the major assets of European economy. The French metallurgy industry - from producers (steel, light alloys, ...) to users (car, aviation, nuclear industries, ...) -- has achieved in many of its sectors a world-class level of excellence, based on high-quality research centres that are recognized both for their theoretical and experimental academic work. By contrast, public research is insufficiently concerned with engineering. In 2004, this industry employed 1 800 000 persons, 220 000 of which worked as engineers and managers in 45 000 companies, with a turnover of 420 billion euros. This state of grace is starting to decline. We are undergoing, in this sector as in others, a de-industrialization that affects upstream activities: courses in these disciplines, which have been previously outstanding, have partially disappeared; laboratories have shrunk; expertise has been dispersed; students are staying away from a discipline they consider 'unfruitful', like many other engineering sciences. Simultaneously, further up in this sector, decision centres have moved away from production centres and away from our country. France still maintains a few important R and D centres within international groups in spite of France's decreasing weight in world production. However, these groups see the future of R and D as being centred in the emerging countries (China, India...). The main users (transport, energy, ...) are losing their experts as are the technical centres on which rely a large network of small and medium businesses. The consequences are alarming in view of the already noticeable loss of technical control. This trend can and must be reversed. Because of its presence in many industrial sectors and its excellence, metallurgy - including both research and industry - is an essential activity in which France should remain a major player

  19. Muslims in Mango (Northern Togo) : some aspects: writing and prayer : some notes on a film

    NARCIS (Netherlands)

    Rouveroy van Nieuwaal, van E.A.B.; Rouveroy van Nieuwaal-Baerends, van E.A.

    1986-01-01

    The film 'Muslims in Mango', which was made during fieldwork among the Anufom in the period 1969-1971, gives an impression of how Islam manifests itself in northern Togo. It centres upon two aspects, writing and prayer. The present report deals briefly with the origins of the Anufom, literacy and

  20. Bhabha Atomic Research Centre: annual report 1986-87

    International Nuclear Information System (INIS)

    1987-01-01

    The Research and Development (R and D) work and achievements of the Bhabha Atomic Research Centre, Bombay, during the financial year 1986-1987 are reported. The R and D activities of BARC cover the entire nuclear fuel cycle, production and use of radioisotopes, radiation protection and also basic research in several disciplines. The report is presented in the chapters entitled: Physical Sciences, Chemical Sciences, Materials and Materials Science, Life Sciences, Radioisotopes, Reactors, Fuel Cycle, Health and Safety, Electronics and Instrumentation, Engineering and General Services. At the end of each chapter are listed the journal articles published, the paper presented at conferences, symposia etc. and technical reports issued by the scientists of BARC in the subject field indicated by the title of the chapter. The R and D work of the outstation units of BARC, namely, Nuclear Research Laboratory at Srinagar, High Altitute Research Laboratory at Gulmarg, Variable Energy Cyclotron Centre at Calcutta and Gauribidanur Seismic Array near Bangalore are also described in the report. The report concludes with a brief account of: (1) transfer of technologies developed at the Centre, (2) activities related to human resource development for nuclear programmes of the country, and (3) progress of design and construction work of Centre for Advanced Technology at Indore. (M.G.B.)

  1. Occupational Sequences: Auto Engines 1. AT 121.

    Science.gov (United States)

    Korb, A. W.; And Others

    In an attempt to individualize an automotive course, the Vocational-Technical Division of Northern Montana College has developed Occupational Sequences for an engine rebuilding course. Occupational Sequences, a learning or teaching aid, is an analysis of numbered operations involved in engine rebuilding. Job sheets, included in the book, provide a…

  2. Challenges in successfully developing three regional radiotherapy centres. The NCCI experience

    International Nuclear Information System (INIS)

    Greenham, Stuart

    2011-01-01

    Full text: This presentation will provide an overview of the processes, experience, challenges and success involved in the establishment of the North Coast Cancer Institute (NCCI). The NCCI is a network of three Integrated Oncology centres in Northern New South Wales offering integrated Medical, Radiation and Haematology outpatient services. NCCI was developed as part of the introduction of radiotherapy into a region previously without access to a local radiotherapy service and as a result with poor radiotherapy utilisation and referral rates. NCCI commenced radiotherapy services in Coffs Harbour in May 2007 followed by Port Macquarie in August of the same year and finally in Lismore in May 20 I O. Radiotherapy services commenced with Intensity Modulated Radiotherapy and Image guided radiotherapy as standard of care for some disease sites with remote access to planning systems and electronic workflow process supporting the treatment process. Forming a small team to simultaneously design, build and establish two new treatment centres to take advantage of the most contemporary treatment modalities while also planning for a third centre was a significant challenge. The challenges and successful outcomes will be discussed as part of this presentation.

  3. All India Seminar on Biomedical Engineering 2012

    CERN Document Server

    Bhatele, Mukta

    2013-01-01

    This book is a collection of articles presented by researchers and practitioners, including engineers, biologists, health professionals and informatics/computer scientists, interested in both theoretical advances and applications of information systems, artificial intelligence, signal processing, electronics and other engineering tools in areas related to biology and medicine in the All India Seminar on Biomedical Engineering 2012 (AISOBE 2012), organized by The Institution of Engineers (India), Jabalpur Local Centre, Jabalpur, India during November 3-4, 2012. The content of the book is useful to doctors, engineers, researchers and academicians as well as industry professionals.

  4. K-Ar ages of Early Miocene arc-type volcanoes in northern New Zealand

    International Nuclear Information System (INIS)

    Hayward, B.W.; Black, P.M.; Smith, I.E.M.; Ballance, P.F.; Itaya, T.; Doi, M.; Takagi, M.; Bergman, S.; Adams, C.J.; Herzer, R.H.; Robertson, D.J.

    2001-01-01

    Understanding the temporal and spatial development of the Early Miocene Northland Volcanic Arc is critical to interpreting the patterns of volcanic activity in northern New Zealand through the Late Cenozoic. The northwesterly trending arc is considered to have developed above a southwest-dipping subduction system. The distribution of its constituent eruptive centres is described in terms of an eastern belt that extends along the eastern side of Northland and a complementary broad western belt which includes subaerial and submarine volcanic edifices. Critical examination of all 216 K-Ar ages available, including 180 previously unpublished ages, and their assessment against tectonic, lithostratigraphic, seismic stratigraphic, and biostratigraphic constraints, leads us to deduce a detailed chronology of periods of activity for the various Early (and Middle) Miocene arc-type volcanic complexes and centres of northern New Zealand: Waipoua Shield Volcano Complex (19-18 Ma, Altonian); Kaipara Volcanic Complex (23-16 Ma, Waitakian-Altonian); Manukau Volcanic Complex (c. 23-15.5 Ma, Waitakian-Clifdenian); North Cape Volcanic Centre (23-18 Ma, Waitakian-Altonian); Whangaroa Volcanic Complex (22.5-17.5 Ma, Waitakian-Altonian); Taurikura Volcanic Complex (22-15.5 Ma, Otaian-Clifdenian); Parahaki Dacites (22.5-18 Ma, Waitakian-Altonian); Kuaotunu Volcanic Complex (18.5-11 Ma, Altonian-Waiauan). In general, volcanic activity does not show geographic migration with time, and the western (25-15.5 Ma) and eastern (23-11 Ma) belts appear to have developed concurrently. (author). 123 refs., 9 figs., 1 tab

  5. Annual Report 1991. Institute for systems engineering and informatics

    International Nuclear Information System (INIS)

    1992-01-01

    The report presents the achievements of the Institute for Systems Engineering and Informatics (ISEI) of the Joint Research Centre (JRC) of the Commission of the European Communities (CEC) for 1991. The JRC is a European scientific and technical research centre established by the member states of the CEC. Its four sites in Belgium (Geel), Germany (Karlsruhe), the Netherland (Petten) and Italy (Ispra) house 8 institutes, each with its own focus of expertise. ISEI, based at Ispra, was created in 1990 by the merger of the Institute for Systems Engineering (ISE) and the Centre for Information Technologies and Electronics (CITE). The main areas of activity of the Institute are: - Industrial and Environmental Risk, - Nuclear Safeguards, -Fusion Reactor Systems Integration and Safety, - Solar Energy Systems and Energy Management, - Advanced Computing, - Informatic services

  6. Northern pipelines : backgrounder

    International Nuclear Information System (INIS)

    2002-04-01

    Most analysts agree that demand for natural gas in North America will continue to grow. Favourable market conditions created by rising demand and declining production have sparked renewed interest in northern natural gas development. The 2002 Annual Energy Outlook forecasted U.S. consumption to increase at an annual average rate of 2 per cent from 22.8 trillion cubic feet to 33.8 TCF by 2020, mostly due to rapid growth in demand for electric power generation. Natural gas prices are also expected to increase at an annual average rate of 1.6 per cent, reaching $3.26 per thousand cubic feet in 2020. There are currently 3 proposals for pipelines to move northern gas to US markets. They include a stand-alone Mackenzie Delta Project, the Alaska Highway Pipeline Project, and an offshore route that would combine Alaskan and Canadian gas in a pipeline across the floor of the Beaufort Sea. Current market conditions and demand suggest that the projects are not mutually exclusive, but complimentary. The factors that differentiate northern pipeline proposals are reserves, preparedness for market, costs, engineering, and environmental differences. Canada has affirmed its role to provide the regulatory and fiscal certainty needed by industry to make investment decisions. The Government of the Yukon does not believe that the Alaska Highway Project will shut in Mackenzie Delta gas, but will instead pave the way for development of a new northern natural gas industry. The Alaska Highway Pipeline Project will bring significant benefits for the Yukon, the Northwest Territories and the rest of Canada. Unresolved land claims are one of the challenges that has to be addressed for both Yukon and the Northwest Territories, as the proposed Alaska Highway Pipeline will travel through traditional territories of several Yukon first Nations. 1 tab., 4 figs

  7. Book collections in the library of the Gama Research Centre

    International Nuclear Information System (INIS)

    Widodo, R.U.; Soeratman, S.

    1976-01-01

    Book collection in the library of Gama Atomic Energy Research Centre, National Atomic Energy Agency in December 1974 is grouped according to Universal Decimal Classification. In accordance with the function of the library most of the collections are on physics, mathematics, and engineering. Authors and subjects are alphabetically indexed in the last part of the catalog. (author)

  8. Particular mechanism for continuously varying the compression ratio for an internal combustion engine

    Science.gov (United States)

    Raţiu, S.; Cătălinoiu, R.; Alexa, V.; Miklos, I.; Cioată, V.

    2018-01-01

    Variable compression ratio (VCR) is a technology to adjust the compression ratio of an internal combustion engine while the engine is in operation. The paper proposes the presentation of a particular mechanism allowing the position of the top dead centre to be changed, while the position of the bottom dead centre remains fixed. The kinematics of the mechanism is studied and its trajectories are graphically represented for different positions of operation.

  9. Community Documentation Centre on Industrial Risk. Bulletin no. 8

    International Nuclear Information System (INIS)

    Masera, M.; Rasmussen, K.

    1993-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  10. Community Documentation Centre on Industrial Risk. Bulletin no. 4

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1991-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  11. Community Documentation Centre on Industrial Risk. Bulletin no. 10

    International Nuclear Information System (INIS)

    Perschke, A.; Kirchsteiger, C.

    1996-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  12. Community Documentation Centre on Industrial Risk. Bulletin no. 5

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1991-11-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  13. Community Documentation Centre on Industrial Risk. Bulletin no. 7

    International Nuclear Information System (INIS)

    Gow, H.B.F.; Carditello, I.

    1993-04-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  14. Community Documentation Centre on Industrial Risk. Bulletin no. 9

    International Nuclear Information System (INIS)

    Perschke, A.

    1995-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  15. Community Documentation Centre on Industrial Risk. Bulletin no. 6

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1992-06-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  16. Community Documentation Centre on Industrial Risk. Bulletin no. 11

    International Nuclear Information System (INIS)

    Perschke, A.; Kirchsteiger, C.; Carnevali, C.

    1997-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  17. Reservoir engineering assessment of Dubti geothermal field, Northern Tendaho Rift, Ethiopia

    Energy Technology Data Exchange (ETDEWEB)

    Battistelli, A.; Ferragina, C. [Aquater S.p.A. (ENI Group), San Lorenzo in Campo (Italy); Yiheyis, A.; Abatneh, W. [Ethiopian Institute of Geological Surveys, Addis Ababa (Ethiopia); Calore, C. [International Institute for Geothermal Research, Pisa (Italy)

    2002-06-01

    Following on from surface exploration surveys performed during the 1970s and early 1980s, exploration drilling was carried out in the Tendaho Rift, in Central Afar (Ethiopia), from October 1993 to June 1995. Three deep and one shallow well were drilled in the central part of the Northern Tendaho Rift to verify the existence of a geothermal reservoir and its possible utilisation for electric power generation. The project was jointly financed by the Ethiopian Ministry of Mines and Energy and the Italian Ministry for Foreign Affairs. Project activities were performed by the Ethiopian Institute of Geological Surveys and Aquater SpA. The main reservoir engineering data discussed in this paper were collected during drilling and testing of the above four wells, three of which are located inside the Dubti Cotton Plantation, in which a promising hydrothermal area was identified by surface exploration surveys. Drilling confirmed the existence of a liquid-dominated shallow reservoir inside the Dubti Plantation, characterised by a boiling -point-for-depth temperature distribution down to about 500 m depth. The main permeable zones in the Sedimentary Sequence, which is made up of lacustrine deposits, are located in correspondence to basalt lava flow interlayerings, or at the contact between volcanic and sedimentary rocks. At depth, the basaltic lava flows that characterise the Afar Stratoid Series seem to have low permeability, with the exception of fractured zones associated with sub-vertical faults. Two different upflows of geothermal fluids have been inferred: one flow connected to the Dubti fault feeds the shallow reservoir crossed by wells TD-2 and TD-4, where a maximum temperature of 245{sup o}C was recorded; the second flow seems to be connected with a fault located east of well TD-1, where the maximum recorded temperature was 270{sup o}C. A schematic conceptual model of the Dubti hydrothermal area, as derived from reservoir engineering studies integrated with geological

  18. Designed by Engineers: An analysis of interactionaries with engineering students

    Directory of Open Access Journals (Sweden)

    Henrik Artman

    2014-12-01

    Full Text Available The aim of this study is to describe and analyze learning taking place in a collaborative design exercise involving engineering students. The students perform a time-constrained, open-ended, complex interaction design task, an “interactionary”. A multimodal learning perspective is used. We have performed detailed analyses of video recordings of the engineering students, including classifying aspects of interaction. Our results show that the engineering students carry out and articulate their design work using a technology-centred approach and focus more on the function of their designs than on aspects of interaction. The engineering students mainly make use of ephemeral communication strategies (gestures and speech rather than sketching in physical materials. We conclude that the interactionary may be an educational format that can help engineering students learn the messiness of design work. We further identify several constraints to the engineering students’ design learning and propose useful interventions that a teacher could make during an interactionary. We especially emphasize interventions that help engineering students-retain aspects of human-centered design throughout the design process. This study partially replicates a previous study which involved interaction design students.

  19. The Stirling engine mechanism optimization

    Directory of Open Access Journals (Sweden)

    Jiří Podešva

    2016-03-01

    Full Text Available A special type of the gas engine with external combustion is called Stirling engine. The mechanism has two pistons with two volumes inside. The pistons are connected together through cooler, regenerator and warmer. The engine effectivity depends on the piston movement behaviour. The usual sinusoidal time curve leads to low effectiveness. The quick movement from lower to upper position with a certain delay in both top and bottom dead centres is more effective. The paper deals with three types of mechanisms, analyzing the piston movement, and their behavior. Special emphasize is taken to the piston movement regime.

  20. Feasibility study for the Nuclear Research Centre of the Nuclear Energy Commission

    International Nuclear Information System (INIS)

    1985-01-01

    The feasibility study was carried out in order to evaluate the possibility of building a Nuclear Research Centre in Uruguay, which would support a wide range of nuclear related technological activities. A market research was carried out, of the products to be manufactured at the Nuclear Centre, regarding the size of production. A detailed list of the main products considered is enclosed. The siting study was performed through the analysis of the incidental factors, such as environment, technical scope and socio-ecomonic factors. An engineering study for the main installations was done. The investment and financial sources were also studied

  1. CMS tracker slides into centre stage

    CERN Document Server

    2006-01-01

    As preparations for the magnet test and cosmic challenge get underway, a prototype tracker has been carefully inserted into the centre of CMS. The tracker, in its special platform, is slowly inserted into the centre of CMS. The CMS prototype tracker to be used for the magnet test and cosmic challenge coming up this summer has the same dimensions -2.5 m in diameter and 6 m in length- as the real one and tooling exactly like it. However, the support tube is only about 1% equipped, with 2 m2 of silicon detectors installed out of the total 200 m2. This is already more than any LEP experiment ever used and indicates the great care needed to be taken by engineers and technicians as these fragile detectors were installed and transported to Point 5. Sixteen thousand silicon detectors with a total of about 10 million strips will make up the full tracker. So far, 140 modules with about 100 000 strips have been implanted into the prototype tracker. These silicon strips will provide precision tracking for cosmic muon...

  2. A new Cyrtanthus species(Amaryllidaceae: Cyrtantheae endemic to the Albany Centre, Eastern Cape, South Africa

    Directory of Open Access Journals (Sweden)

    D. A. Snijman

    2003-09-01

    Full Text Available Cyrtanthus macmasteri Snijman is a rare new species from the Albany Centre of endemism. Eastern Cape. South Africa. Most closely related to C.  galpinii Baker, and autumn-flowering species with a single or rarely-flowered inflorescence from the northern regions of southern Africa. C macmasteri is distinguished by a 3 to 6-flowered inflorescence. It grows on steep banks of the Great Kei River and its tributaries and flowers in summer.

  3. Bhabha Atomic Research Centre annual report : 1989

    International Nuclear Information System (INIS)

    1991-01-01

    The main thrust of the various research and development (R and D) activities of the Bhabha Atomic Research Centre (BARC), Bombay, is towards the implementation of India's nuclear power programme. To that end, its R and D activities cover the entire nuclear fuel cycle, reactor technology; applications of radioisotopes and radiations in agriculture, medicine and industries; and radiation protection in nuclear installations. The report presents in summarised form the R and D activities carried out during 1989 in the chapters entitled: Physical Sciences, Chemical Sciences, Materials and Materials Sciences, Radioisotopes, Reactors, Fuel Cycle, Radiological Safety and Protection, Electronics and Instrumentation, Engineering Services, Life Sciences and General. At the end of each chapter, a list of publications by the staff scientists in the corresponding subject field is given. The list includes published journal articles and technical reports, and papers presented at conferences, symposia etc. The report also covers the R and D activities of the outstation units of BARC, namely, Nuclear Research Laboratory, Srinagar; High Altitude Research Laboratory, Gulmarg; and Variable Energy Cyclotron Centre, Calcutta. BARC is also engaged in basic an applied research in frontier areas of science such as plasma and fusion physics, accelerators and lasers, high temperature superconductivity, condensed matter physics, high pressure physics, high resolution spectroscopy, chemical reaction dynamics and laser induced chemistry, electronics and robotics: radiation biology, and genetic engineering. Report is illustrated with a number of figures, graphs, and coloured pictures. (M.G.B.) figs., refs

  4. Controlling the Didactic Relation: A Case in Process Engineering Education

    Science.gov (United States)

    Jaako, Juha

    2014-01-01

    A case study was conducted during 1994-2013 on several groups of process engineering students to see what was needed to transform a single course from a teacher-centred to a student-centred learning environment (SCLE). Development work was done incrementally, using Herbart's didactic triangle as a theoretical framework. The effects of the…

  5. Greenhouse engineering: New technologies and approaches

    NARCIS (Netherlands)

    Montero, J.I.; Henten, van E.J.; Son, J.E.; Castilla, N.

    2011-01-01

    Firstly, this article discusses the greenhouse engineering situation in three geographic areas which are relevant in the field of protected cultivation: Northern Asia, The Netherlands and the Mediterranean. For each area, the prevailing greenhouse type and equipment is briefly described. Secondly,

  6. Diagnostic and laboratory test ordering in Northern Portuguese Primary Health Care: a cross-sectional study

    Science.gov (United States)

    Sá, Luísa; Teixeira, Andreia Sofia Costa; Tavares, Fernando; Costa-Santos, Cristina; Couto, Luciana; Costa-Pereira, Altamiro; Hespanhol, Alberto Pinto; Santos, Paulo

    2017-01-01

    Objectives To characterise the test ordering pattern in Northern Portugal and to investigate the influence of context-related factors, analysing the test ordered at the level of geographical groups of family physicians and at the level of different healthcare organisations. Design Cross-sectional study. Setting Northern Primary Health Care, Portugal. Participants Records about diagnostic and laboratory tests ordered from 2035 family physicians working at the Northern Regional Health Administration, who served approximately 3.5 million Portuguese patients, in 2014. Outcomes To determine the 20 most ordered diagnostic and laboratory tests in the Northern Regional Health Administration; to identify the presence and extent of variations in the 20 most ordered diagnostic and laboratory tests between the Groups of Primary Care Centres and between health units; and to study factors that may explain these variations. Results The 20 most ordered diagnostic and laboratory tests almost entirely comprise laboratory tests and account for 70.9% of the total tests requested. We can trace a major pattern of test ordering for haemogram, glucose, lipid profile, creatinine and urinalysis. There was a significant difference (P<0.001) in test orders for all tests between Groups of Primary Care Centres and for all tests, except glycated haemoglobin (P=0.06), between health units. Generally, the Personalised Healthcare Units ordered more than Family Health Units. Conclusions The results from this study show that the most commonly ordered tests in Portugal are laboratory tests, that there is a tendency for overtesting and that there is a large variability in diagnostic and laboratory test ordering in different geographical and organisational Portuguese primary care practices, suggesting that there may be considerable potential for the rationalisation of test ordering. The existence of Family Health Units seems to be a strong determinant in decreasing test ordering by Portuguese family

  7. Jose f Regional Underground Research Centre: a new and attractive location for interdisciplinary teaching, research and training in the field of nuclear engineering

    International Nuclear Information System (INIS)

    Pacovsky, J.; Vasicek, R.

    2010-10-01

    The Jose f Gallery, located in the central Bohemia region of the Czech Republic (not far from the capital, Prague), was first excavated in 1981 as an exploration complex for the potential mining of gold. In 2007, the gallery was substantially reconstructed to house the Jose f Underground Educational Facility (Jose f UEF), which subsequently became an autonomous workplace under the direction of the Czech Technical University in Prague. At the beginning of 2010, the UEF was renamed the Jose f Regional Underground Research Centre (Jose f URC) which, along with the extensive underground complex, features modern above-ground facilities. One of the most important roles of this research centre is to provide practical -in situ- instruction in the fields of geotechnical engineering, geology, geochemistry, radiochemistry and radioecology. The training of future experts in this authentic underground setting involves the participation of several other Czech universities and numerous experienced specialists from outside the academic sphere. The IAEA has recently added the Jose f URC to its prestigious list of international training centres involved in the Training in and demonstration of waste disposal technologies in underground research facilities - A network of centres of excellence project. In addition to teaching and training, the Jose f URC is heavily involved in a wide range of research and development activities. The Jose f URC underground facilities are currently being used for research purposes as part of several European Union International experimental projects addressing various issues related to deep repository radioactive waste disposal (TIMODAZ - FP6, Forge - FP7, PETRUS II - FP7) as well as for hosting domestic projects supported by the Czech Ministry of Industry and Trade and the Czech Science Foundation. The Jose f URC is also working in close cooperation with the private construction sector providing practical training in underground construction

  8. Jose f Regional Underground Research Centre: a new and attractive location for interdisciplinary teaching, research and training in the field of nuclear engineering

    Energy Technology Data Exchange (ETDEWEB)

    Pacovsky, J.; Vasicek, R., E-mail: Pacovsky@fsv.cvut.c [Czech Technical University in Prague, Faculty of Civil Engineering, Centre of Experimental Geotechnics, Thakurova 7, 166-29 Prague 6 (Czech Republic)

    2010-10-15

    The Jose f Gallery, located in the central Bohemia region of the Czech Republic (not far from the capital, Prague), was first excavated in 1981 as an exploration complex for the potential mining of gold. In 2007, the gallery was substantially reconstructed to house the Jose f Underground Educational Facility (Jose f UEF), which subsequently became an autonomous workplace under the direction of the Czech Technical University in Prague. At the beginning of 2010, the UEF was renamed the Jose f Regional Underground Research Centre (Jose f URC) which, along with the extensive underground complex, features modern above-ground facilities. One of the most important roles of this research centre is to provide practical -in situ- instruction in the fields of geotechnical engineering, geology, geochemistry, radiochemistry and radioecology. The training of future experts in this authentic underground setting involves the participation of several other Czech universities and numerous experienced specialists from outside the academic sphere. The IAEA has recently added the Jose f URC to its prestigious list of international training centres involved in the Training in and demonstration of waste disposal technologies in underground research facilities - A network of centres of excellence project. In addition to teaching and training, the Jose f URC is heavily involved in a wide range of research and development activities. The Jose f URC underground facilities are currently being used for research purposes as part of several European Union International experimental projects addressing various issues related to deep repository radioactive waste disposal (TIMODAZ - FP6, Forge - FP7, PETRUS II - FP7) as well as for hosting domestic projects supported by the Czech Ministry of Industry and Trade and the Czech Science Foundation. The Jose f URC is also working in close cooperation with the private construction sector providing practical training in underground construction

  9. Introducing Knowledge Management in Study Program of Nuclear Engineering

    International Nuclear Information System (INIS)

    Pleslic, S.

    2012-01-01

    Nuclear engineering is the branch of engineering concerning application of the fission as well as the fusion of atomic nuclei, and the application of other sub-atomic physics, based on the principles of nuclear physics. In the sub-field of nuclear fission there are many investigations of interactions and maintaining of systems and components like nuclear reactors and nuclear power plants. The field also includes the study of different applications of ionizing radiation (medicine, agriculture...), nuclear safety, the problems of thermodynamics transport, nuclear materials and nuclear fuels, and other related technologies like radioactive waste management. In the area of nuclear science and engineering a big amount of knowledge has been accumulated over the last decades. Different levels of nuclear knowledge were considered in different ways and they were taught to different parts of population as a general human culture and as a general scientific-technical-technological culture (high schools, nuclear information centres, training centres, universities...). An advanced level of nuclear knowledge has been accumulated by many experienced workers, specialists and experts in all nuclear and nuclear-related fields and applications. In the last 20 years knowledge management has established itself as a discipline of enabling individuals, teams and whole organizations to create, share and apply knowledge collectively and systematically, with goal to better achieve their objectives. Also, knowledge management became key strategic approach for management of intellectual assets and knowledge that can improve safety, efficiency and innovation, and lead to preserve and enhance current knowledge. Knowledge management could be applied in education, training, networking, human resource development and capacity building, sharing, pooling and transferring knowledge form centres of knowledge to centres of growth. Considering the critical importance of nuclear knowledge it is important

  10. Impacts of northern climate changes on Arctic engineering practice

    International Nuclear Information System (INIS)

    Esch, D.C.

    1993-01-01

    Potential impacts of climate changes on engineering design practices in the Arctic are discussed with reference to permafrost engineering aspects, hydrology, and coastal and sea ice processes. Permafrost generally remains thermally stable only when mean annual air temperature remains 2-4 degrees below zero and the original surface conditions remain unchanged. It has been demonstrated that a temperature rise of only 1-2 degrees is very critical. The many different climate change forecasts make it difficult to design structures in permafrost with definite levels of confidence over a project's lifetime (i.e. up to 50 years). Consequences of climate warming on transportation-related structures can be estimated to a certain degree by examining experience with natural permafrost surfaces affected by land clearing or with structures built in permafrost. Melting of permafrost will be accompanied by surface settlements, slumping of slopes and banks, and creation of thaw pits and ponds, with eventual distress to many surface structures such as pavements and foundations. Designing for a warmer climate is illustrated for the case of the Bethel Highway, the first in Alaska to be designed for a progressively warmer climate. Increased water flows both from ice melting and increased precipitation in a warmer climate will make forecasting of discharge levels in drainage basins a difficult task. Of great concern to engineers is the potential for increased erosion and sediment loadings in streams. In coastal engineering, the effects of rising sea levels, increased open-water areas, and more severe storms foreseen in a warmer climate will require heavier and more elevated shore protection. On the other hand, shipping and offshore operations will be made easier. 9 refs., 4 figs

  11. Oral Assessment in Engineering Education

    DEFF Research Database (Denmark)

    Jensen, Bogi Bech

    2010-01-01

    This paper describes an oral assessment technique that has been used for over 20 years at the Centre of Maritime Studies and Engineering in the Faroe Islands. The technique has proven less laborious for the examiners and the students agree that this technique not only assesses their surface...

  12. Engineering and science highlights of the KAT-7 radio telescope

    NARCIS (Netherlands)

    Foley, A. R.; Alberts, T.; Armstrong, R. P.; Barta, A.; Bauermeister, E. F.; Bester, H.; Blose, S.; Booth, R. S.; Botha, D. H.; Buchner, S. J.; Carignan, C.; Cheetham, T.; Cloete, K.; Coreejes, G.; Crida, R. C.; Cross, S. D.; Curtolo, F.; Dikgale, A.; de Villiers, M. S.; du Toit, L. J.; Esterhuyse, S. W. P.; Fanaroff, B.; Fender, R. P.; Fijalkowski, M.; Fourie, D.; Frank, B.; George, D.; Gibbs, P.; Goedhart, S.; Grobbelaar, J.; Gumede, S. C.; Herselman, P.; Hess, K. M.; Hoek, N.; Horrell, J.; Jonas, J. L.; Jordaan, J. D. B.; Julie, R.; Kapp, F.; Kotzé, P.; Kusel, T.; Langman, A.; Lehmensiek, R.; Liebenberg, D.; Liebenberg, I. J. V.; Loots, A.; Lord, R. T.; Lucero, D. M.; Ludick, J.; Macfarlane, P.; Madlavana, M.; Magnus, L.; Magozore, C.; Malan, J. A.; Manley, J. R.; Marais, L.; Marais, N.; Marais, S. J.; Maree, M.; Martens, A.; Mokone, O.; Moss, V.; Mthembu, S.; New, W.; Nicholson, G. D.; van Niekerk, P. C.; Oozeer, N.; Passmoor, S. S.; Peens-Hough, A.; Pińska, A. B.; Prozesky, P.; Rajan, S.; Ratcliffe, S.; Renil, R.; Richter, L. L.; Rosekrans, D.; Rust, A.; Schröder, A. C.; Schwardt, L. C.; Seranyane, S.; Serylak, M.; Shepherd, D. S.; Siebrits, R.; Sofeya, L.; Spann, R.; Springbok, R.; Swart, P. S.; Thondikulam, Venkatasubramani L.; Theron, I. P.; Tiplady, A.; Toruvanda, O.; Tshongweni, S.; van den Heever, L.; van der Merwe, C.; van Rooyen, R.; Wakhaba, S.; Walker, A. L.; Welz, M.; Williams, L.; Wolleben, M.; Woudt, P. A.; Young, N. J.; Zwart, J. T. L.

    2016-01-01

    The construction of the seven-dish Karoo Array Telescope (KAT-7) array in the Karoo region of the Northern Cape in South Africa was intended primarily as an engineering prototype for technologies and techniques applicable to the MeerKAT telescope. This paper looks at the main engineering and

  13. Development of the Advanced CANDU Reactor control centre

    International Nuclear Information System (INIS)

    Malcolm, S.; Leger, R.

    2004-01-01

    The next generation CANDU control centre is being designed for the Advanced CANDU Reactor (ACR) station. The design is based upon the recent Qinshan control room with further upgrades to meet customer needs with respect to high capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This evolutionary design includes the long proven functionality at several existing CANDU control centres such as the 4-unit station at Darlington, with advanced features made possible by new control and display technology. Additionally, ACR control centres address characteristics resulting from Human Factors Engineering (HFE) analysis of control centre operations in order to further enhance personnel awareness of system and plant status. Statistics show that up to 70% of plant significant events, which have caused plant outages, have a root cause attributable to the human from such sources as complex interfaces, procedures, maintenance and management practices. Consequently, special attention is made for the application of HFE throughout the ACR design process. The design process follows a systematic analytical approach to define operations staff information and information presentation requirements. The resultant human-system interfaces (HSI) such as those for monitoring, annunciation and control information are then verified and validated against the system design requirements to provide a high confidence level that adequate and correct information is being provided in a timely manner to support the necessary operational tasks. The ACR control centre provides plant staff with an improved operability capability due to the combination of systematic design and enhanced operating features. Significant design processes (i.e. development) or design features which contribute to this improved operability, include: Design Process: Project HFE Program Plan - intent, scope, timeliness and interfacing; HFE aspects of design process - procedures and instructions

  14. Development of the advanced CANDU reactor control centre

    International Nuclear Information System (INIS)

    Malcolm, S.; Leger, R.

    2004-01-01

    The next generation CANDU control centre is being designed for the Advanced CANDU Reactor (ACR) station. The design is based upon the recent Qinshan control room with further upgrades to meet customer needs with respect to high capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This evolutionary design includes the long proven functionality at several existing CANDU control centres such as the 4-unit station at Darlington, with advanced features made possible by new control and display technology. Additionally, ACR control centres address characteristics resulting from Human Factors Engineering (HFE) analysis of control centre operations in order to further enhance personnel awareness of system and plant status. Statistics show that up to 70% of plant significant events, which have caused plant outages, have a root cause attributable to the human from such sources as complex interfaces, procedures, maintenance and management practices. Consequently, special attention is made for the application of HFE throughout the ACR design process. The design process follows a systematic analytical approach to define operations staff information and information presentation requirements. The resultant human-system interfaces (HSI) such as those for monitoring, annunciation and control information are then verified and validated against the system design requirements to provide a high confidence level that adequate and correct information is being provided in a timely manner to support the necessary operational tasks. The ACR control centre provides plant staff with an improved operability capability due to the combination of systematic design and enhanced operating features. Significant design processes (i.e. development) or design features which contribute to this improved operability, include: Design Process: Project HFE Program Plan - intent, scope, timeliness and interfacing; HFE aspects of design process - procedures and instructions

  15. Humanitarian engineering in the engineering curriculum

    Science.gov (United States)

    Vandersteen, Jonathan Daniel James

    There are many opportunities to use engineering skills to improve the conditions for marginalized communities, but our current engineering education praxis does not instruct on how engineering can be a force for human development. In a time of great inequality and exploitation, the desire to work with the impoverished is prevalent, and it has been proposed to adjust the engineering curriculum to include a larger focus on human needs. This proposed curriculum philosophy is called humanitarian engineering. Professional engineers have played an important role in the modern history of power, wealth, economic development, war, and industrialization; they have also contributed to infrastructure, sanitation, and energy sources necessary to meet human need. Engineers are currently at an important point in time when they must look back on their history in order to be more clear about how to move forward. The changing role of the engineer in history puts into context the call for a more balanced, community-centred engineering curriculum. Qualitative, phenomenographic research was conducted in order to understand the need, opportunity, benefits, and limitations of a proposed humanitarian engineering curriculum. The potential role of the engineer in marginalized communities and details regarding what a humanitarian engineering program could look like were also investigated. Thirty-two semi-structured research interviews were conducted in Canada and Ghana in order to collect a pool of understanding before a phenomenographic analysis resulted in five distinct outcome spaces. The data suggests that an effective curriculum design will include teaching technical skills in conjunction with instructing about issues of social justice, social location, cultural awareness, root causes of marginalization, a broader understanding of technology, and unlearning many elements about the role of the engineer and the dominant economic/political ideology. Cross-cultural engineering development

  16. British Engineers and Africa 1875-1914

    DEFF Research Database (Denmark)

    Andersen, Casper

    the imperial diasporas, identities and networks that developed as the British engineering profession established connections on the African continent. Using a wide range of primary sources that include correspondence, diaries, technical reports, institutional minutes and periodicals, Andersen reconstructs...... the networks and activities of Britain's engineers while focusing on London as a centre of imperial expansion. By treating Britain and the empire as an interconnected zone heanalyses the ways in whichideas , people and technologies circulated during the critical period....

  17. A computational study of free-piston diesel engine combustion

    Energy Technology Data Exchange (ETDEWEB)

    Mikalsen, R.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, Newcastle University, Devonshire Building, Newcastle upon Tyne, NE1 7RU (United Kingdom)

    2009-07-15

    This paper investigates the in-cylinder gas motion, combustion process and nitrogen oxide formation in a free-piston diesel engine and compares the results to those of a conventional engine, using a computational fluid dynamics engine model. Enhanced radial gas flow (squish and reverse squish) around top dead centre is found for the free-piston engine compared to a conventional engine, however it is found that this has only minor influence on the combustion process. A higher heat release rate from the pre-mixed combustion phase due to an increased ignition delay was found, along with potential reductions in nitrogen oxides emissions formation for the free-piston engine. (author)

  18. Manche centre

    International Nuclear Information System (INIS)

    1997-05-01

    After a general presentation of radioactivity and radioactive wastes and of the French national agency for the management of radioactive wastes (ANDRA), this brochure gives a general overview of the Manche low- and medium-level radioactive waste disposal centre: principles of storage safety, waste containers (first confinement barrier), storage facility and cover (second confinement barrier), the underground (third confinement barrier), the impact of the centre on its environment, and the control of radioactivity in the vicinity of the centre. (J.S.)

  19. Nuclear technology centre. Preserving and developing competence and resources

    International Nuclear Information System (INIS)

    Tiren, I.

    1995-01-01

    The Royal Institute of Technology in Stockholm provides one third of Sweden's capacity for engineering studies and technical research at the post-high-school level. Altogether, the institute includes about 8000 students and 900 active postgraduate students and has a staff of nearly 2500. The research activities cover a broad spectrum of the natural sciences and technology, as well as architecture, industrial economics, urban planning, work science and environmental technology. In 1993, a Nuclear Technology Centre was established at the institute. The purpose of this Centre is to stimulate education and research in nuclear technology in order to contribute to the preservation and development of competence in the nuclear field. The formation of the Centre should be regarded as one of several recent initiatives aimed at maintaining a high level of safety and reliability in the operation of nuclear power plants at a time when there are political manoeuvres to phase out nuclear energy in Sweden. The paper summarizes the motives that led to the formation of the Centre, its goals and organization, and its initial activities and results. The paper may be of interest to similar organizations in other countries which are also faced with uncertainties regarding the future of existing nuclear power plants or of current programmes, and which consider that co-operation between the industry and universities is an important factor in ensuring the quality of technological development. (author). 4 refs

  20. CLINICAL PROFILE AND COMMON CAUSES OF HAEMOLYTIC ANAEMIA IN A TERTIARY CARE HOSPITAL, NORTHERN KERALA

    OpenAIRE

    Jog Antony; Reeta J; Sreelakshmi S; Rohit Mathew4; Adarsh Surendran

    2016-01-01

    BACKGROUND Haemolytic anaemia is a well-recognised clinical problem. This study looks into the clinical profile of haemolytic anaemia and also attempts to find out the common underlying causative disease. It also tries to group the patients according to the clinical manifestations and underlying causes. MATERIALS AND METHODS This is a hospital-based observational study conducted in a tertiary care centre in Northern Kerala. Forty-four adult patients with clinical manifestati...

  1. Association between maternal depression and child stunting in Northern Ghana: a cross-sectional study.

    Science.gov (United States)

    Wemakor, Anthony; Mensah, Kofi Akohene

    2016-08-24

    Stunting indicates failure to attain genetic potential for height and is a well-documented indicator for poor growth. Depression is common in women of reproductive age and women's mental health problems may affect the growth of young children. We examined the association between maternal depression and stunting in mother-child pairs attending Child Welfare Clinic (CWC) in Northern Ghana. An analytical cross-sectional study was performed involving mothers (15-45 years) and their children (0-59 months) who attended CWC at Bilpeila Health Centre, Tamale, Ghana. Socio-demographic data were collected using a semi-structured questionnaire, maternal depression was measured using Centre for Epidemiological Studies Depression Screening Scale, and anthropometry was conducted on children following standard procedures. The association between maternal depression and child stunting was examined in logistic regression adjusting for potential confounders. Prevalence rates of child stunting and maternal depression were estimated at 16.1 and 27.8 % respectively in Northern Ghana. Mothers with depression when compared with those without depression tended to be younger, be currently unmarried, belong to the poorest household wealth tertile, and were more likely to have low birth weight babies, so these characteristics were adjusted for. In an adjusted multivariate logistic regression model, children of depressed mothers were almost three times more likely to be stunted compared to children of non-depressed mothers (Adjusted OR = 2.48, 95 % CI 1.29-4.77, p = 0.0011). There is a high prevalence of depression among mothers in Northern Ghana which is associated with child stunting. Further studies are needed to identify the determinants of maternal depression and to examine its association with child stunting to inform nutrition programming.

  2. Living through conflict and post-conflict: experiences of health workers in northern Uganda and lessons for people-centred health systems.

    Science.gov (United States)

    Namakula, Justine; Witter, Sophie

    2014-09-01

    Providing people-centred health systems--or any systems at all--requires specific measures to protect and retain healthcare workers during and after the conflict. This is particularly important when health staff are themselves the target of violence and abduction, as is often the case. This article presents the perspective of health workers who lived through conflict in four districts of northern Uganda--Pader, Gulu, Amuru, and Kitgum. These contained more than 90% of the people displaced by the decades of conflict, which ended in 2006. The article is based on 26 in-depth interviews, using a life history approach. This participatory tool encouraged participants to record key events and decisions in their lives, and to explore areas such as their decision to become a health worker, their employment history, and their experiences of conflict and coping strategies. These were analyzed thematically to develop an understanding of how to protect and retain staff in these challenging contexts. During the conflict, many health workers lost their lives or witnessed the death of their friends and colleagues. They also experienced abduction, ambush and injury. Other challenges included disconnection from social and professional support systems, displacement, limited supplies and equipment, increased workload and long working days and lack of pay. Health workers were not passive in the face of these challenges, however. They adopted a range of safety measures, such as mingling with community members, sleeping in the bush, and frequent change of sleeping place, in addition to psychological and practical coping strategies. Understanding their motivation and their views provides an important insight how to maintain staffing and so to continue to offer essential health care during difficult times and in marginalized areas. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2014; all rights reserved.

  3. The ideal Atomic Centre; Le Centre Atomique ideal

    Energy Technology Data Exchange (ETDEWEB)

    Mas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The author presents considerations which should prove to be of interest to all those who have to design, to construct and to operate a nuclear research centre. A large number of the ideas presented can also be applied to non-nuclear scientific research centres. In his report the author reviews: various problems with which the constructor is faced: ground-plan, infrastructure, buildings and the large units of scientific equipment in the centre, and those problems facing the director: maintenance, production, supplies, security. The author stresses the relationship which ought to exist between the research workers and the management. With this aim in view he proposes the creation of National School for Administration in Research which would train administrative executives for public or private organisations; they would be specialised in the fields of fundamental or applied research. (author) [French] L'auteur propose une base de reflexions a tous ceux qui doivent concevoir, realiser et faire vivre un Centre d'Etudes Nucleaires. Un grand nombre des idees exprimees peut d'ailleurs s'appliquer a un Centre d'Etudes Scientifiques non nucleaires. Dans son ouvrage, l'auteur passe en revue les differents problemes qui se posent au constructeur: plan, masse, infrastructure, batiments et grands appareils du Centre, et ceux qu'a a resoudre le directeur: entretien, fabrication, approvisionnements, securite. L'auteur insiste sur l'aspect des rapports qui doivent exister entre les chercheurs et ceux qui les administrent. Il propose a cette fin la creation d'une Ecole Nationale d'Administration de la Recherche qui formerait des cadres administratifs pour les organismes publics ou prives, specialises dans la Recherche fondamentale ou appliquee. (auteur)

  4. A review on chitosan centred scaffolds and their applications in tissue engineering.

    Science.gov (United States)

    Ahmed, Shakeel; Annu; Sheikh, Javed; Ali, Akbar

    2018-05-03

    The diversity and availability of biopolymer and increased clinical demand for safe scaffolds lead to an increased interest in fabricating scaffolds in order to achieve fruitful progress in tissue engineering. Due to biocompatibility, biodegradability, inherent antimicrobial character, chitosan has drawn ample consideration in recent years. Chitosan is a biopolymer obtained by de-acetylation of chitin extracted from shells of crustaceans and fungi. Due to the presence of reactive functionality in the molecular chain chitosan can be modified either chemically or physically to fabricate the tailor-made scaffolds having desired properties for tissue engineering centered applications. In this review chitosan, its properties and role either virgin, chemically or physically modified, 2D or 3D scaffolds for tissue engineering application have been highlighted. Copyright © 2017. Published by Elsevier B.V.

  5. Factors controlling the redox potential of ZnCe6 in an engineered bacterioferritin photochemical 'reaction centre'.

    Science.gov (United States)

    Mahboob, Abdullah; Vassiliev, Serguei; Poddutoori, Prashanth K; van der Est, Art; Bruce, Doug

    2013-01-01

    Photosystem II (PSII) of photosynthesis has the unique ability to photochemically oxidize water. Recently an engineered bacterioferritin photochemical 'reaction centre' (BFR-RC) using a zinc chlorin pigment (ZnCe6) in place of its native heme has been shown to photo-oxidize bound manganese ions through a tyrosine residue, thus mimicking two of the key reactions on the electron donor side of PSII. To understand the mechanism of tyrosine oxidation in BFR-RCs, and explore the possibility of water oxidation in such a system we have built an atomic-level model of the BFR-RC using ONIOM methodology. We studied the influence of axial ligands and carboxyl groups on the oxidation potential of ZnCe6 using DFT theory, and finally calculated the shift of the redox potential of ZnCe6 in the BFR-RC protein using the multi-conformational molecular mechanics-Poisson-Boltzmann approach. According to our calculations, the redox potential for the first oxidation of ZnCe6 in the BRF-RC protein is only 0.57 V, too low to oxidize tyrosine. We suggest that the observed tyrosine oxidation in BRF-RC could be driven by the ZnCe6 di-cation. In order to increase the efficiency of tyrosine oxidation, and ultimately oxidize water, the first potential of ZnCe6 would have to attain a value in excess of 0.8 V. We discuss the possibilities for modifying the BFR-RC to achieve this goal.

  6. Canadian Irradiation Centre

    International Nuclear Information System (INIS)

    1987-05-01

    The Canadian Irradiation Centre is a non-profit cooperative project between Atomic Energy of Canada Limited, Radiochemical Company and Universite du Quebec, Institut Armand-Frappier, Centre for Applied Research in Food Science. The Centre's objectives are to develop, demonstrate and promote Canada's radiation processing technology and its applications by conducting applied research; training technical, professional and scientific personnel; educating industry and government; demonstrating operational and scientific procedures; developing processing procedures and standards, and performing product and market acceptance trials. This pamphlet outlines the history of radoation technology and the services offered by the Canadian Irradiation Centre

  7. Atomic energy training centres in Latin America. Report of IAEA Mission

    International Nuclear Information System (INIS)

    1959-01-01

    as soon as possible. The cost of new facilities might be of the order of $ 7,500,000, with an annual budget of approximately $ 650,000. Staff required: 40 scientists and 175 employees; (3) whenever it appears feasible to gather necessary staff of high creative ability and established productivity and when funds can be made available for facilities, equipment and operating costs, at least one integrated atomic energy training centre should be established completely equipped with all the special facilities which are characteristic and essential to such an establishment. Approximate cost of the facilities $ 40,000,000; annual budget $7,500,000. Staff required: 250 scientists and engineers, approximately 500 supporting personnel and possibly 450 administrative and operating personnel

  8. Atomic energy training centres in Latin America. Report of IAEA Mission

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-01-15

    as soon as possible. The cost of new facilities might be of the order of $ 7,500,000, with an annual budget of approximately $ 650,000. Staff required: 40 scientists and 175 employees; (3) whenever it appears feasible to gather necessary staff of high creative ability and established productivity and when funds can be made available for facilities, equipment and operating costs, at least one integrated atomic energy training centre should be established completely equipped with all the special facilities which are characteristic and essential to such an establishment. Approximate cost of the facilities $ 40,000,000; annual budget $7,500,000. Staff required: 250 scientists and engineers, approximately 500 supporting personnel and possibly 450 administrative and operating personnel.

  9. CMS Centre at CERN

    CERN Multimedia

    2007-01-01

    A new "CMS Centre" is being established on the CERN Meyrin site by the CMS collaboration. It will be a focal point for communications, where physicists will work together on data quality monitoring, detector calibration, offline analysis of physics events, and CMS computing operations. Construction of the CMS Centre begins in the historic Proton Synchrotron (PS) control room. The historic Proton Synchrotron (PS) control room, Opened by Niels Bohr in 1960, will be reused by CMS to built its control centre. TThe LHC@FNAL Centre, in operation at Fermilab in the US, will work very closely with the CMS Centre, as well as the CERN Control Centre. (Photo Fermilab)The historic Proton Synchrotron (PS) control room is about to start a new life. Opened by Niels Bohr in 1960, the room will be reused by CMS to built its control centre. When finished, it will resemble the CERN Contro...

  10. Human-centred Governance

    DEFF Research Database (Denmark)

    Bason, Christian

    2017-01-01

    Design approaches are now being applied all over the world as a powerful approach to innovating public policies and services. Christian Bason, author of Leading public design: Discovering human-centred governance, argues that by bringing design methods into play, public managers can lead change...... with citizens at the centre, and discover a new model for steering public organisations: human-centred governance....

  11. The fall of the Northern Unicorn: Tangential motions in the Galactic Anti-centre with SDSS and Gaia

    OpenAIRE

    de Boer, T. J. L.; Belokurov, V.; Koposov, S. E.

    2017-01-01

    We present the first detailed study of the behaviour of the stellar proper motion across the entire Galactic Anti-centre area visible in the Sloan Digital Sky Survey data. We use recalibrated SDSS astrometry in combination with positions from {\\it Gaia} DR1 to provide tangential motion measurements with a systematic uncertainty $

  12. Prospects of biogas as dual fuel in small diesel engines

    International Nuclear Information System (INIS)

    Singh, Irvinder; Mittal, V.K.

    1992-01-01

    A study was conducted on diesel engines to find out the effect of induction rate of biogas on engine performance indices. The results of dual fuel engine performance was compared with diesel mode for various levels of biogas induction rate (0.3 to 7.2 l/s) engine load (20% to full load) and injection timing (20.6 to 48 before top dead centre). At full and 80% brake load, the best energy mix between diesel and biogas was 1.5:1 and 4:1 respectively. (author). 7 refs., 7 figs., 4 tabs

  13. The Northern arc of Eridani’s Debris Ring as seen by ALMA

    OpenAIRE

    Booth, Mark; Dent, William R. F.; Jordán, Andrés; Lestrade, Jean-François; Hales, Antonio S.; Wyatt, Mark C.; Casassus, Simon; Ertel, Steve; Greaves, Jane; Kennedy, Grant M.; Matrà, Luca; Augereau, Jean-Charles; Villard, Eric

    2017-01-01

    We present the first Atacama Large Millimeter/submillimeter Array (ALMA) observations of the closest known extrasolar debris disc. This disc orbits the star ε Eri, a K-type star just 3.2 pc away. Due to the proximity of the star, the entire disc cannot fit within the ALMA field of view. Therefore, the observations have been centred 18" North of the star, providing us with a clear detection of the Northern arc of the ring, at a wavelength of 1.3 mm. The observed disc emission is found to be na...

  14. CCS-MIP: Low cost Customizable Control Centre

    Science.gov (United States)

    Labezin, Christian; Vielcanet, Pierre

    1994-01-01

    The positioning and station keeping of French national satellites are among the main missions of CNES French Space Agency CNES. The related experience and skills of the Toulouse Space Centre are reknown and often required at international level for a wide range of missions. CISI, a software engineering company, has been contributing during the last 20 years to the development of the French space programs, particularly in the field of space missions ground control segments. The CCS-MIP system, presented here, is a satellite positioning and station-keeping system designed to answer the CNES multi-mission needs, easily adaptable for a wide range of applications.

  15. Energy alternatives for irrigation pumping: an economic analysis for northern India.

    OpenAIRE

    Bhatia R

    1984-01-01

    ILO pub-WEP pub. Working paper presenting an economic analysis of alternative energy sources for irrigation pumping in Northern India - considers economic and technical aspects of photovoltaic pumping systems, solar energy systems, electric power, dual-fuel and diesel engines, Biogas and wind power; discusses economic and social development aspects. Abbreviations, bibliography, glossary and tables.

  16. Mechanical Engineering at RWTH Aachen University: Professional Curriculum Development and Teacher Training

    Science.gov (United States)

    Henning, Klaus; Bornefeld, Gero; Brall, Stefan

    2007-01-01

    This paper offers a multi-perspective view on engineering education at RWTH Aachen University: curriculum design, examples of newly developed teaching methods for engineering curricula, and teaching competencies and teacher qualification. It is based on the theories of student-centred learning, project learning, social skills, etc., but the paper…

  17. The School for Nuclear Engineering is 25 years old: Where teachers go to school

    International Nuclear Information System (INIS)

    Knapp, W.

    1986-01-01

    For a quarter of a century the School for Nuclear Engineering at the Karlsruhe Nuclear Research Centre has provided further education in all areas of nuclear engineering. The courses are attended by all kinds of people: school teachers, shift managers in nuclear power stations and engineers from the Third World, for example. (orig.) [de

  18. Sustaining Global Pressures: Women in Science and Engineering

    Indian Academy of Sciences (India)

    Women in Science and Engineering. (SGPW 2008). Next Generation. Challenges and Opportunities. January 3 - 5, 2008. Venue. SRI Convention Centre,. Anupuram, Kalpakkam,. Tamil Nadu, India www.iwsakalpakkam.com. Organised by. Indian Women Scientists' Association (IWSA). Kalpakkam Branch. IWSA. IN DA.

  19. UAE: power generation in Dubai and the Northern Emirates

    International Nuclear Information System (INIS)

    1990-01-01

    This report is concerned with power generation in Dubai and the Northern Emirates as it is carried out by the Federal Ministry of Electricity and Water whose Head Office is in Dubai, Dubai Electricity Company - DEC - and the Sharjah Electricity and Water Department. These utilities run a number of diesel engine, steam turbine and gas turbine power stations and desalination plants, individual details of which are listed. (Author)

  20. 18 January 2011 - The British Royal Academy of Engineering in the LHC tunnel with CMS Collaboration Spokesperson G. Tonelli and Beams Department Head P. Collier; in the CERN Control Centre with P. Collier and LHC superconducting magnet test hall with Technology Department Head F. Bordry.

    CERN Multimedia

    Jean-Claude Gadmer

    2011-01-01

    18 January 2011 - The British Royal Academy of Engineering in the LHC tunnel with CMS Collaboration Spokesperson G. Tonelli and Beams Department Head P. Collier; in the CERN Control Centre with P. Collier and LHC superconducting magnet test hall with Technology Department Head F. Bordry.

  1. Bhabha Atomic Research Centre: annual report 1988

    International Nuclear Information System (INIS)

    1989-12-01

    The research and development (R and D) work carried out in the Bhabha Atomic Research Centre (BARC), Bombay during 1988 is summarised and presented in the sections entitled Physical Sciences, Chemical Sciences, Materials and Materials Science, Radioisotopes, Reactors, Fuel cycle, Radiological Safety and Protection, Electronics and Instrumentation, Engineering Services, Life Sciences and General. At the end of each section a list of publications is also given. The R and D work of the outstation units of BARC, namely, Nuclear Research Laboratory, Srinagar; High Altitute Research Laboratory, Gulmarg and Variable Energy Cyclotron Centre, Calcutta are also described in this report. Some of the highlights of the work during the year are: (1) Medium Energy Heavy Ion Accelerator (MEHIA) facility set up jointly by BARC and the Tata Institute of Fundamental Research (TIFR) at TIFR premises became fully operational in September 1988. A number of new compositions of high temperature supconducting materials were synthesized. The highest transition temperature achieved was 125 K. Research work to improve the quality of sintered uranium oxide pellets achieved the purpose. Nuclear fuels were fabricated by using sol-gel process. R and D work for 235 MWe and 500 MWe PHWR type reactors is continuing. Conceptual design of the fuel handling system for the prototype fast breeder reactor was finalised. 233 U+Al alloy fuel for Kamini reactor was fabricated. Progress has been made in industrial applications of enzymes. Various applications of radioisotopes are being continued. Certain technologies and processes developed in the Centre were transferred to commercial agencies for large scale exploitation. (M.G.B.)

  2. Engineering spin-wave channels in submicrometer magnonic waveguides

    Directory of Open Access Journals (Sweden)

    XiangJun Xing

    2013-03-01

    Full Text Available Based on micromagnetic simulations and model calculations, we demonstrate that degenerate well and barrier magnon modes can exist concurrently in a single magnetic waveguide magnetized perpendicularly to the long axis in a broad frequency band, corresponding to copropagating edge and centre spin waves, respectively. The dispersion relations of these magnon modes clearly show that the edge and centre modes possess much different wave characteristics. By tailoring the antenna size, the edge mode can be selectively activated. If the antenna is sufficiently narrow, both the edge and centre modes are excited with considerable efficiency and propagate along the waveguide. By roughening the lateral boundary of the waveguide, the characteristics of the relevant channel can be easily engineered. Moreover, the coupling of the edge and centre modes can be conveniently controlled by scaling the width of the waveguide. For a wide waveguide with a narrow antenna, the edge and centre modes travel relatively independently in spatially-separate channels, whereas for a narrow strip, these modes strongly superpose in space. These discoveries might find potential applications in emerging magnonic devices.

  3. Nutritional status, dietary habits, nutritional knowledge and self-care assessment in a group of older adults attending community centres in Pavia, Northern Italy.

    Science.gov (United States)

    Turconi, G; Rossi, M; Roggi, C; Maccarini, L

    2013-02-01

    The population of industrialised countries is ageing as a consequence of an increase in life expectancy. As a result of the increasing ageing process, the assessment of nutritional status and dietary habits, as well as the assessment of self-care, is needed to plan selected actions aimed at improving the quality of life in the third and fourth life spans. A cross-sectional study was carried out on a randomly selected sample of 200 healthy older adults (≥65 years old), attending community centres for older people in Pavia, Northern Italy. Ninety-two percent of the recruited subjects participated in the survey. Anthropometric measurements and the Mini Nutritional Assessment were performed. Dietary habits, nutritional knowledge and self-care were investigated using a questionnaire administered by two dietitians. The majority of subjects were low socio-economic status and overweight [mean (SD) body mass index = 28.4 (4.3) kg/m(2) ], 12% were malnourished according to their Mini Nutritional Assessment score and the majority of the arm muscle circumference measurements were below the 10th percentile, predicting accelerated loss of lean mass, even in the healthy independently living older adults. Only 30% of the sample had adequate dietary habits, whereas the ability to self-care was good for the whole sample. The unhealthy and unbalanced diet, frequently too rich in sugar and fats and low in protein intake, might explain being overweight and the loss of lean mass in the study subjects. © 2012 The Authors Journal of Human Nutrition and Dietetics © 2012 The British Dietetic Association Ltd.

  4. RTEMS Centre - Support and Maintenance Centre to RTEMS Operating System

    Science.gov (United States)

    Silva, H.; Constantino, A.; Freitas, D.; Coutinho, M.; Faustino, S.; Mota, M.; Colaço, P.; Sousa, J.; Dias, L.; Damjanovic, B.; Zulianello, M.; Rufino, J.

    2009-05-01

    RTEMS CENTRE - Support and Maintenance Centre to RTEMS Operating System is a joint ESA/Portuguese Task Force initiative to develop a support and maintenance centre to the Real-Time Executive for Multiprocessor Systems (RTEMS). This paper gives a high level visibility of the progress, the results obtained and the future work in the RTEMS CENTRE [6] and in the RTEMS Improvement [7] projects. RTEMS CENTRE started officially in November 2006, with the RTEMS 4.6.99.2 version. A full analysis of RTEMS operating system was produced. The architecture was analysed in terms of conceptual, organizational and operational concepts. The original objectives [1] of the centre were primarily to create and maintain technical expertise and competences in this RTOS, to develop a website to provide the European Space Community an entry point for obtaining support (http://rtemscentre.edisoft.pt), to design, develop, maintain and integrate some RTEMS support tools (Timeline Tool, Configuration and Management Tools), to maintain flight libraries and Board Support Packages, to develop a strong relationship with the World RTEMS Community and finally to produce some considerations in ARINC-653, DO-178B and ECSS E-40 standards. RTEMS Improvement is the continuation of the RTEMS CENTRE. Currently the RTEMS, version 4.8.0, is being facilitated for a future qualification. In this work, the validation material is being produced following the Galileo Software Standards Development Assurance Level B [5]. RTEMS is being completely tested, errors analysed, dead and deactivated code removed and tests produced to achieve 100% statement and decision coverage of source code [2]. The SW to exploit the LEON Memory Management Unit (MMU) hardware will be also added. A brief description of the expected implementations will be given.

  5. Teaching ethics to engineers: ethical decision making parallels the engineering design process.

    Science.gov (United States)

    Bero, Bridget; Kuhlman, Alana

    2011-09-01

    In order to fulfill ABET requirements, Northern Arizona University's Civil and Environmental engineering programs incorporate professional ethics in several of its engineering courses. This paper discusses an ethics module in a 3rd year engineering design course that focuses on the design process and technical writing. Engineering students early in their student careers generally possess good black/white critical thinking skills on technical issues. Engineering design is the first time students are exposed to "grey" or multiple possible solution technical problems. To identify and solve these problems, the engineering design process is used. Ethical problems are also "grey" problems and present similar challenges to students. Students need a practical tool for solving these ethical problems. The step-wise engineering design process was used as a model to demonstrate a similar process for ethical situations. The ethical decision making process of Martin and Schinzinger was adapted for parallelism to the design process and presented to students as a step-wise technique for identification of the pertinent ethical issues, relevant moral theories, possible outcomes and a final decision. Students had greatest difficulty identifying the broader, global issues presented in an ethical situation, but by the end of the module, were better able to not only identify the broader issues, but also to more comprehensively assess specific issues, generate solutions and a desired response to the issue.

  6. Function of Train Traction Department and Railway Vehicles in Logistic Centres

    Directory of Open Access Journals (Sweden)

    Velimir Kolar

    2007-05-01

    Full Text Available The increasing globalization has spread the production locationsto every part of the world thus increasing even more therole of transport in determining the price and quality of a product.Therefore, the producers and carriers join together moreand more frequently through the supply chains. Railway carriershave a very significant role in supply chains, both throughorganization of transport and forming the trains as final products,and through forming the logistic centres. Logistic centresare the starting and the final railway stations but also the meetingpoints of the national carrier with other carriers (sea, road,river as well as other railway carriers and they also represent informationcentres. For the quality of service at logistic centres, itis important to have well organized operation of train traction.In order to keep up the regulmity of trains and the quality oftransport at logistic centres, among other things, it is necessaryto provide an optimal number of locomotives and to providethe technical inspection place. Special attention should be paidto the organization of work peiformed by the engine staff At logisticcentres it is possible to organize high-quality technical inspectionof wagons thus increasing the traffic safety.

  7. Annual conference on engineering and the physical sciences in medicine

    International Nuclear Information System (INIS)

    Le Heron, J.

    1999-01-01

    The venue for the 1998 annual conference on Engineering and the Physical Sciences in Medicine was the Wrest Point Casino Convention Centre, Hobart, from 15 to 19 November. Jointly sponsored by the Australasian College of Physical Scientists and Engineers in Medicine, the College of Biomedical Engineers and the Society of Medical and Biomedical Engineering, this meeting is a major forum for professionals working in these areas in Australasia. The theme for the conference was Relevance beyond rationalism - charting a course for the future. This reviewer will consider only those presentations concerned with the use of radiation in medicine. (author)

  8. International Conference for Innovation in Biomedical Engineering and Life Sciences

    CERN Document Server

    Usman, Juliana; Mohktar, Mas; Ahmad, Mohd

    2016-01-01

    This volumes presents the proceedings of ICIBEL 2015, organized by the Centre for Innovation in Medical Engineering (CIME) under Innovative Technology Research Cluster, University of Malaya. It was held in Kuala Lumpur, Malaysia, from 6-8 December 2015. The ICIBEL 2015 conference promotes the latest researches and developments related to the integration of the Engineering technology in medical fields and life sciences. This includes the latest innovations, research trends and concerns, challenges and adopted solution in the field of medical engineering and life sciences. .

  9. Birth centre confinement at the Queen Victoria Medical Centre. I. Obstetric and neonatal outcome.

    Science.gov (United States)

    Campbell, J; Hudson, H; Lumley, J; Morris, N; Rao, J; Spensley, J

    1981-10-03

    A review of hte first 175 confinements at the Queen Victoria Medical Centre Birth Centre is presented. The design, structure and function of hte Birth Centre is described and the safety of the programme demonstrated. Seventy-four pregnancies (42%) accepted for Birth Centre confinement required transfer because of antepartum or intrapartum complications. There were satisfactory obstetric and neonatal outcomes in all pregnancies. The first year's experience has allowed a reassessment of the risk factors, which will permit greater use of the Birth Centre without any increases risk to mothers or babies.

  10. The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay

    International Nuclear Information System (INIS)

    Debiesse, J.

    1958-01-01

    The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' was created (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author) [fr

  11. The Search for Centre

    Science.gov (United States)

    Nunes, April

    2006-01-01

    This paper acknowledges the importance of a dancer's centre but likewise highlights the problematic nature of the communication of this concept from dance teacher to student. After a brief introduction of orthodox approaches in finding centre, this paper suggests a method of locating centre through the ancient somatic technique.

  12. Conceptual planning and designing of a greywater recycling system for a nursery house and a daycare centre in Karagwe, Tanzania

    OpenAIRE

    Shrestha, Sudina

    2017-01-01

    Engineers without Borders (EWB) Finland started a project to plan, conceptualize and design a nursery centre and a daycare centre in Kayanga, Tanzania. During the planning phase, EWB Finland was informed about inconsistent water supply in the area of the site.Hence, this thesis was designed to overcome the insufficiency of water in the site location. The presumed value of water consumption for the site indicated a large percentage of greywater generation that are usually drained down the ...

  13. The modest seismicity of the northern Red Sea rift

    Science.gov (United States)

    Mitchell, Neil C.; Stewart, Ian C. F.

    2018-05-01

    Inferring tectonic movements from earthquakes (`seismotectonics') relies on earthquakes faithfully recording tectonic motions. In the northern half of the Red Sea, however, events of magnitude 5.0 and above are almost entirely absent from global catalogues, even though GPS and other plate motion data suggest that the basin is actively rifting at ˜10 mm yr-1. Seismic moments computed here from event magnitudes contributed to the International Seismology Centre (ISC) suggest that the moment release rate is more than an order of magnitude smaller than for the southern Red Sea and for the Southwest Indian Ridge (SWIR), which is spreading at a comparable rate to the central Red Sea and is more remote from recording stations. A smaller moment release rate in the northern Red Sea might be anticipated from its smaller spreading rate, but seismic coupling coefficients, which account for spreading rate variations, are also one order of magnitude smaller than for the other two areas. We explore potential explanations for this apparently reduced seismicity. The northern Red Sea is almost continuously covered with thick evaporites and overlying Plio-Pleistocene sediments. These deposits may have reduced the thickness of the seismogenic layer, for example, by elevating lithosphere temperatures by a thermal blanketing effect or by leading to excess pore fluid pressures that reduce effective stress. The presence of subdued seismicity here implies that tectonic movements can in places be poorly recorded by earthquake data and requires that alternative data be sought when investigating the active tectonics of sedimented rifts in particular.

  14. Earthquake engineering and structural dynamics studies at Bhabha Atomic Research Centre

    International Nuclear Information System (INIS)

    Reddy, G.R.; Parulekar, Y.M.; Sharma, A.; Dubey, P.N.; Vaity, K.N.; Kukreja, Mukhesh; Vaze, K.K.; Ghosh, A.K.; Kushwaha, H.S.

    2007-01-01

    Earthquake Engineering and structural Dynamics has gained the attention of many researchers throughout the world and extensive research work is performed. Linear behaviour of structures, systems and components (SSCs) subjected to earthquake/dynamic loading is clearly understood. However, nonlinear behaviour of SSCs subjected to earthquake/dynamic loading need to be understood clearly and design methods need to be validated experimentally. In view of this, three major areas in earthquake engineering and structural dynamics identified for research includes: design and development of passive devices to control the seismic/dynamic response of SSCs, nonlinear behaviour of piping systems subjected to earthquake loading and nonlinear behavior of RCC structures under seismic excitation or dynamic loading. BARC has performed extensive work and also being continued in the above-identified areas. The work performed is helping for clearer understanding of nonlinear behavior of SSCs as well as in developing new schemes, methodologies and devices to control the earthquake response of SSCs. (author)

  15. The Aube centre; Le Centre de l`Aube

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This educational booklet is devoted to a general presentation of the Aube radioactive wastes storage centre. After a short presentation of the Andra, the French national agency for the management of radioactive wastes, it gives some general information about radioactive wastes (origin, classification), containers (quality assurance and different types), wastes transportation (planning, safety), and about the Aube centre itself: description, treatment and conditioning of drums (compacting and injection), storage facilities, geological situation of the site, and environmental controls. (J.S.)

  16. Improved operability of the CANDU 9 control centre

    International Nuclear Information System (INIS)

    Macbeth, M. J.; Webster, A.

    1996-01-01

    The next generation CANDU nuclear power plant being designed by AECL is the 900 MWe class CANDU 9 station. It is based upon the Darlington CANDU station design which is among the world leaders in capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This Control Centre design includes the proven functionality of existing CANDU control centres (including the Wolsong 2,3, and 4 control centre improvements, such as the Emergency Core Cooling panels), the characteristics identified by systematic design with human factors analysis of operations requirements and the advanced features needed to improve station operability which is made possible by the application of new technology. The CANDU 9 Control Centre provides plant staff with an improved operability capability due to the combination of proveness, systematic design with human factors engineering and enhanced operating features. Significant features which contribute to this improved operability include: · Standard NSP, BOP and F/H panels with controls and indicators integrated by a standard display/presentation philosophy. · Common plant parameter signal database for extensive monitoring, checking, display and annunciation. · Powerful annunciation system allowing alarm filtering, prioritizing and interrogation to enhance staff recognition of events, plant state and required corrective procedural actions. · The use of an overview display to present immediate and uncomplicated plant status information to facilitate operator awareness of unit status in a highly readable and recognizable format. · Extensive cross checking of similar process parameters amongst themselves, with the counterpart safety system parameters and as well as with 'signature' values obtained from known steady state conditions. · Powerful calculation capabilities, using the plant wide database, providing immediate recognizable and readable and readable output data on plant state information and plant state change

  17. Client Centred Desing

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Nielsen, Janni; Levinsen, Karin

    2008-01-01

    In this paper we argue for the use of Client Centred preparation phases when designing complex systems. Through Client Centred Design human computer interaction can extend the focus on end-users to alse encompass the client's needs, context and resources....

  18. The IAEA International Seismic Safety Centre and IAEA safety standards for site evaluation and design of NPPs

    International Nuclear Information System (INIS)

    Godoy, A.; Sollogoub, P; )

    2009-01-01

    This presentation covers the following topics: 'Lessons learned' from the occurrence of strong natural events, (tsunamis, earthquakes, hurricanes, etc.) The International Seismic Safety Centre as a global focal point for the nuclear engineering community in those fields. A need for international cooperation, openness and transparency – Sharing of experience

  19. Engineered Geothermal System Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Petty, Susan

    2014-06-19

    In June 2009, AltaRock Energy began field work on a project supported by the U.S. Department of Energy entitled “Use of Multiple Stimulations to Improve Economics of Engineered Geothermal Systems in Shallow High Temperature Intrusives.” The goal of the project was to develop an Engineered Geothermal System (EGS) in the portion of The Geysers geothermal field operated by the Northern California Power Agency (NCPA). The project encountered several problems while deepening Well E-7 which culminated in the suspension of field activities in September 2009. Some of the problems encountered are particular to The Geysers area, while others might be encountered in any geothermal field, and they might be avoided in future operations.

  20. SAP Nuclear Competence Centre

    International Nuclear Information System (INIS)

    Andrlova, Z.

    2009-01-01

    In this issue we continue and introduce the SAP Nuclear Competence Centre and its head Mr. Igor Dzama. SAP Nuclear Competence Centrum is one of the fi rst competence centres outside ENEL headquarters. It should operate in Slovakia and should have competencies within the whole Enel group. We are currently dealing with the issues of organisation and funding. We are trying to balance the accountability to the NPP directors and to the management of the competence centres at Enel headquarters; we are looking at the relations between the competence centres within the group and defining the services that we will provide for the NPPs. author)

  1. Large-scale fuel cycle centres

    International Nuclear Information System (INIS)

    Smiley, S.H.; Black, K.M.

    1977-01-01

    The US Nuclear Regulatory Commission (NRC) has considered the nuclear energy centre concept for fuel cycle plants in the Nuclear Energy Centre Site Survey 1975 (NECSS-75) Rep. No. NUREG-0001, an important study mandated by the US Congress in the Energy Reorganization Act of 1974 which created the NRC. For this study, the NRC defined fuel cycle centres as consisting of fuel reprocessing and mixed-oxide fuel fabrication plants, and optional high-level waste and transuranic waste management facilities. A range of fuel cycle centre sizes corresponded to the fuel throughput of power plants with a total capacity of 50,000-300,000MW(e). The types of fuel cycle facilities located at the fuel cycle centre permit the assessment of the role of fuel cycle centres in enhancing the safeguard of strategic special nuclear materials - plutonium and mixed oxides. Siting fuel cycle centres presents a smaller problem than siting reactors. A single reprocessing plant of the scale projected for use in the USA (1500-2000t/a) can reprocess fuel from reactors producing 50,000-65,000MW(e). Only two or three fuel cycle centres of the upper limit size considered in the NECSS-75 would be required in the USA by the year 2000. The NECSS-75 fuel cycle centre evaluation showed that large-scale fuel cycle centres present no real technical siting difficulties from a radiological effluent and safety standpoint. Some construction economies may be achievable with fuel cycle centres, which offer opportunities to improve waste-management systems. Combined centres consisting of reactors and fuel reprocessing and mixed-oxide fuel fabrication plants were also studied in the NECSS. Such centres can eliminate shipment not only of Pu but also mixed-oxide fuel. Increased fuel cycle costs result from implementation of combined centres unless the fuel reprocessing plants are commercial-sized. Development of Pu-burning reactors could reduce any economic penalties of combined centres. The need for effective fissile

  2. Sustainable Development in the Engineering Curriculum: Teaching and Learning Resources

    OpenAIRE

    Penlington, Roger; Steiner, Simon

    2014-01-01

    This repository of teaching and learning resources is a companion to the 2nd edition of “An Introduction to Sustainable Development in the Engineering Curriculum”, by Roger Penlington and Simon Steiner, originally created by The Higher Education Academy Engineering Subject Centre, Loughborough University. \\ud The purpose of this collection of teaching and learning re-sources is to provide access, with a brief resumé, to materials in curricula reform, recognition awards, and university movemen...

  3. Northern employment

    International Nuclear Information System (INIS)

    Zavitz, J.

    1997-01-01

    Hiring practices and policies and employment opportunities that were available in the Beaufort Sea and MacKenzie Delta project for local residents and for people from southern Canada were dealt with in this chapter. Depending on the source, Northern hiring was a mere token, or a genuine and successful effort on the part of the companies to involve the native population and to share with them the benefits of the project. The fact remains that opening up job opportunities for Northerners was not easily attained, and would never have been realized without the involvement of government and community organizations. Government also played a major role in developing policies and training regimes. By the end of exploration operations, the hiring of Northern residents in the oil and gas industry had become a requirement of drilling applications. Training programs were also created to ensure that Northern residents received the means necessary to take advantage of Northern employment opportunities

  4. Effects of unstratified and centre-stratified randomization in multi-centre clinical trials.

    Science.gov (United States)

    Anisimov, Vladimir V

    2011-01-01

    This paper deals with the analysis of randomization effects in multi-centre clinical trials. The two randomization schemes most often used in clinical trials are considered: unstratified and centre-stratified block-permuted randomization. The prediction of the number of patients randomized to different treatment arms in different regions during the recruitment period accounting for the stochastic nature of the recruitment and effects of multiple centres is investigated. A new analytic approach using a Poisson-gamma patient recruitment model (patients arrive at different centres according to Poisson processes with rates sampled from a gamma distributed population) and its further extensions is proposed. Closed-form expressions for corresponding distributions of the predicted number of the patients randomized in different regions are derived. In the case of two treatments, the properties of the total imbalance in the number of patients on treatment arms caused by using centre-stratified randomization are investigated and for a large number of centres a normal approximation of imbalance is proved. The impact of imbalance on the power of the study is considered. It is shown that the loss of statistical power is practically negligible and can be compensated by a minor increase in sample size. The influence of patient dropout is also investigated. The impact of randomization on predicted drug supply overage is discussed. Copyright © 2010 John Wiley & Sons, Ltd.

  5. Centre for Engineering Research Inc. - 1995 annual report

    International Nuclear Information System (INIS)

    Rubuliak, S.; Bridges, L.

    1995-01-01

    Highlights of some of C-FER's research projects in the energy industry were presented. Accomplishments in 1995 were underscored by tangible results creating value through engineering innovation, realizing strategic advantages, and enhancing system safety and reliability. Among the projects described was the success of the first field test of an AQWANOT (trademark) prototype for downhole separation of water and oil. The test demonstrated the feasibility of combining hydrocyclones and a modified multi-stream downhole pump for simultaneous oil production, downhole water separation and same-well reinjection of 'produced' water. The technology has potential in offshore prospects, as well as for natural gas producers. C-FER's software entitled PIRAMID (pipeline risk analysis for maintenance and inspection decisions) quantifies the impact of in-line inspections on the probability of line failure due to metal loss by corrosion and uses the information to optimize tool selection, defect repair criteria and inspection intervals. C-FER's special environments laboratory (SEL), a facility for tests requiring safe containment of toxic and flammable gases and explosions, was described. A financial summary of the company's operations was included. tabs., figs

  6. RTEMS CENTRE- RTEMS Improvement

    Science.gov (United States)

    Silva, Helder; Constantino, Alexandre; Freitas, Daniel; Coutinho, Manuel; Faustino, Sergio; Sousa, Jose; Dias, Luis; Zulianello, Marco

    2010-08-01

    During the last two years, EDISOFT's RTEMS CENTRE team [1], jointly with the European Space Agency and with the support of the worldwide RTEMS community [2], have been developing an activity to facilitate the qualification of the real-time operating system RTEMS (Real-Time Operating System for Multiprocessor Systems). This paper intends to give a high level visibility of the progress and the results obtained in the RTEMS Improvement [3] activity. The primary objective [4] of the project is to improve the RTEMS product, its documentation and to facilitate the qualification of RTEMS for future space missions, taking into consideration the specific operational requirements. The sections below provide a brief overview of the RTEMS operating system and the activities performed in the RTEMS Improvement project, which includes the selection of API managers to be qualified, the tailoring process, the requirements analysis, the reverse engineering and design of the RTEMS, the quality assurance process, the ISVV activities, the test campaign, the results obtained, the criticality analysis and the facilitation of qualification process.

  7. A national collaboration process: Finnish engineering education for the benefit of people and environment.

    Science.gov (United States)

    Takala, A; Korhonen-Yrjänheikki, K

    2013-12-01

    The key stakeholders of the Finnish engineering education collaborated during 2006-09 to reform the system of education, to face the challenges of the changing business environment and to create a national strategy for the Finnish engineering education. The work process was carried out using participatory work methods. Impacts of sustainable development (SD) on engineering education were analysed in one of the subprojects. In addition to participatory workshops, the core part of the work on SD consisted of a research with more than 60 interviews and an extensive literature survey. This paper discusses the results of the research and the work process of the Collaboration Group in the subproject of SD. It is suggested that enhancing systematic dialogue among key stakeholders using participatory work methods is crucial in increasing motivation and commitment in incorporating SD in engineering education. Development of the context of learning is essential for improving skills of engineering graduates in some of the key abilities related to SD: systemic- and life-cycle thinking, ethical understanding, collaborative learning and critical reflection skills. This requires changing of the educational paradigm from teacher-centred to learner-centred applying problem- and project-oriented active learning methods.

  8. Defining and describing birth centres in the Netherlands - a component study of the Dutch Birth Centre Study.

    Science.gov (United States)

    Hermus, M A A; Boesveld, I C; Hitzert, M; Franx, A; de Graaf, J P; Steegers, E A P; Wiegers, T A; van der Pal-de Bruin, K M

    2017-07-03

    During the last decade, a rapid increase of birth locations for low-risk births, other than conventional obstetric units, has been seen in the Netherlands. Internationally some of such locations are called birth centres. The varying international definitions for birth centres are not directly applicable for use within the Dutch obstetric system. A standard definition for a birth centre in the Netherlands is lacking. This study aimed to develop a definition of birth centres for use in the Netherlands, to identify these centres and to describe their characteristics. International definitions of birth centres were analysed to find common descriptions. In July 2013 the Dutch Birth Centre Questionnaire was sent to 46 selected Dutch birth locations that might qualify as birth centre. Questions included: location, reason for establishment, women served, philosophies, facilities that support physiological birth, hotel-facilities, management, environment and transfer procedures in case of referral. Birth centres were visited to confirm the findings from the Dutch Birth Centre Questionnaire and to measure distance and time in case of referral to obstetric care. From all 46 birth locations the questionnaires were received. Based on this information a Dutch definition of a birth centre was constructed. This definition reads: "Birth centres are midwifery-managed locations that offer care to low risk women during labour and birth. They have a homelike environment and provide facilities to support physiological birth. Community midwives take primary professional responsibility for care. In case of referral the obstetric caregiver takes over the professional responsibility of care." Of the 46 selected birth locations 23 fulfilled this definition. Three types of birth centres were distinguished based on their location in relation to the nearest obstetric unit: freestanding (n = 3), alongside (n = 14) and on-site (n = 6). Transfer in case of referral was necessary for all

  9. International Conference on Artificial Intelligence and Evolutionary Algorithms in Engineering Systems

    CERN Document Server

    Dash, Subhransu; Panigrahi, Bijaya

    2015-01-01

      The book is a collection of high-quality peer-reviewed research papers presented in Proceedings of International Conference on Artificial Intelligence and Evolutionary Algorithms in Engineering Systems (ICAEES 2014) held at Noorul Islam Centre for Higher Education, Kumaracoil, India. These research papers provide the latest developments in the broad area of use of artificial intelligence and evolutionary algorithms in engineering systems. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. It presents invited papers from the inventors/originators of new applications and advanced technologies.

  10. The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay; Formation des scientifiques et des techniciens au Centre d'Etudes Nucleaires de Saclay

    Energy Technology Data Exchange (ETDEWEB)

    Debiesse, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' waeated (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author)Fren. [French] Les besoins considerables actuels et previsibles en chercheurs et scientifiques necessites par l'avevement de l'energie nucleaire imposaient au Commissariat a I'Energie atomique un effort particulier pour augmenter la formation quantitative et qualitative des scientifiques. Les moyens les plus divers ont ete mis en oeuvre: 1- Creation de l'Institut National des Sciences et Techniques Nucleaires par decret de la Presidence du Conseil et de l'Education Nationale en date du 18.6.57. Cet Institut d'Enseignement Superieur (250 etudiants) donne des cours en: genie atomique, mecanique quantique, theorie et technique des Accelerateurs de particules, metallurgie speciale, radiobiologie

  11. The fully integrated biomedical engineering programme at Eindhoven University of Technology

    NARCIS (Netherlands)

    Slaaf, D.W.; Genderen, van M.H.P.

    2009-01-01

    The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a

  12. Birth centre confinement at the Queen Victoria Medical Centre: four years' experience.

    Science.gov (United States)

    Morris, N; Campbell, J; Biro, M A; Lumley, J; Rao, J; Spensley, J

    1986-06-09

    A review of the first four years of the functioning of the birth centre at the Queen Victoria Medical Centre is presented. In that time, 1040 pregnant women were accepted for confinement there. Of these, 52 withdrew for non-obstetric reasons, while 470 were transferred to alternative obstetrical care--274 because of antepartum complications and 196 because of intrapartum problems. Therefore, 518 women were delivered in the birth centre. The care of the women is entrusted almost entirely to a team of midwives and this review demonstrates an enviable safety record.

  13. OBSTACLES TO FAMILY PLANNING USE AMONG RURAL WOMEN IN ATIAK HEALTH CENTER IV, AMURU DISTRICT, NORTHERN UGANDA

    Science.gov (United States)

    Ouma, S.; Turyasima, M.; Acca, H.; Nabbale, F.; Obita, K. O.; Rama, M.; Adong, C. C.; Openy, A.; Beatrice, M. O.; Odongo-Aginya, E. I.; Awor, S.

    2016-01-01

    Background Uganda’s rapid population growth (3.2%) since 1948 has placed more demands on health sector and lowered living standard of Ugandans resulting into 49% of people living in acute poverty especially in post conflict Northern Uganda. The population rise was due to low use of contraceptive methods (21% in rural areas and 43% in urban areas) and coupled with high unmet need for family planning (41%). This indicated poor access to reproductive health services. Effective use of family planning could reduce the rapid population growth. Objective To determine obstacles to family planning use among rural women in Northern Uganda. Design A descriptive cross-sectional analytical study. Setting Atiak Health Centre IV, Amuru District, rural Northern Uganda. Subjects Four hundred and twenty four females of reproductive ages were selected from both Inpatient and Outpatient Departments of Atiak Health Centre IV. Results There was high level of awareness 418 (98.6%), positive attitude 333 (78.6%) and fair level of utilisation 230 (54.2%) of family planning. However, significant obstacles to family planning usage included; long distance to Health facility, unavailability of preferred contraceptive methods, absenteeism of family planning providers, high cost of managing side effects, desire for big family size, children dying less than five years old, husbands forbidding women from using family planning and lack of community leaders’ involvement in family planning programme. Conclusions In spites of the high level of awareness, positive attitude, and free family planning services, there were obstacles that hindered family planning usage among these rural women. However, taking services close to people, reducing number of children dying before their fifth birthday, educating men about family planning, making sure family planning providers and methods are available, reducing cost of managing side effects and involving community leaders will improve utilisation of family

  14. OBSTACLES TO FAMILY PLANNING USE AMONG RURAL WOMEN IN ATIAK HEALTH CENTER IV, AMURU DISTRICT, NORTHERN UGANDA.

    Science.gov (United States)

    Ouma, S; Turyasima, M; Acca, H; Nabbale, F; Obita, K O; Rama, M; Adong, C C; Openy, A; Beatrice, M O; Odongo-Aginya, E I; Awor, S

    Uganda's rapid population growth (3.2%) since 1948 has placed more demands on health sector and lowered living standard of Ugandans resulting into 49% of people living in acute poverty especially in post conflict Northern Uganda. The population rise was due to low use of contraceptive methods (21% in rural areas and 43% in urban areas) and coupled with high unmet need for family planning (41%). This indicated poor access to reproductive health services. Effective use of family planning could reduce the rapid population growth. To determine obstacles to family planning use among rural women in Northern Uganda. A descriptive cross-sectional analytical study. Atiak Health Centre IV, Amuru District, rural Northern Uganda. Four hundred and twenty four females of reproductive ages were selected from both Inpatient and Outpatient Departments of Atiak Health Centre IV. There was high level of awareness 418 (98.6%), positive attitude 333 (78.6%) and fair level of utilisation 230 (54.2%) of family planning. However, significant obstacles to family planning usage included; long distance to Health facility, unavailability of preferred contraceptive methods, absenteeism of family planning providers, high cost of managing side effects, desire for big family size, children dying less than five years old, husbands forbidding women from using family planning and lack of community leaders' involvement in family planning programme. In spites of the high level of awareness, positive attitude, and free family planning services, there were obstacles that hindered family planning usage among these rural women. However, taking services close to people, reducing number of children dying before their fifth birthday, educating men about family planning, making sure family planning providers and methods are available, reducing cost of managing side effects and involving community leaders will improve utilisation of family planning and thus reduce the rapid population growth and poverty.

  15. International research centre launched

    International Nuclear Information System (INIS)

    1965-01-01

    Full text: The first scientific research and educational institution to be set up on a completely international basis was officially inaugurated in Trieste on 5 October 1964 by the Director General of IAEA, Dr. Sigvard Eklund, when he opened the first seminar of the International Centre for Theoretical Physics. As evidence of the international nature of the institution he noted that the scientists who would work and teach there during the first year represented sixteen different countries. By the end of 1964, the Centre building was nearing completion and three of the five floors were occupied. A successful symposium had been held on the subject of plasma physics, and a score of professors and fellows were at work, from Bulgaria, Czechoslovakia, Greece, India, Japan, Jordan, the Netherlands, Norway, Pakistan, Poland, the United Kingdom, and the United States. A dozen scientific papers had been issued as preprints. The main purpose of the Centre is to foster the advancement of theoretical physics through training and research; at first the chief subject will be high-energy and elementary particle physics. Plasma physics, low energy physics and solid-state physics will also be dealt with. Special attention is paid to the needs of the developing countries. Of the 25 fellows selected for the academic year 1964-65, more than half are from South America, Africa and Asia. In conjunction with the Research Centre, there is an Advanced School for theoretical Physics to provide graduate training for fellows who need such preparation before they embark upon research. The Centre works under the guidance of a Scientific Council comprising the president, Prof. M. Sandoval-Vallarta (Nuclear Energy Commission of Mexico); Prof. A. Abragam (Saclay, France); Prof. R. Oppenheimer (Institute for Advanced Study, Princeton, USA); Dr. V. Soloviev (Dubna, USSR); Prof V.F. Weiskopf (Director General, CERN) ; Prof Abdus Salam (Imperial College, London) ; Prof. P. Budini (University of Trieste

  16. Design and Implementation of a Virtual Calculation Centre (VCC for Engineering Students

    Directory of Open Access Journals (Sweden)

    Alaeddine Mokri

    2010-02-01

    Full Text Available Most of the academic institutions in all over the world provide their attendees with databases where courses and other materials could be uploaded, downloaded and checked by the faculty and students. Those materials are mostly PDF files, MS Word files, MS power point presentations or downloadable computer programs. Even though those databases are very beneficial, they need to be improved to meet the students’ needs, especially in engineering faculties where students may need thermo-physical properties of some substances, charts, diagrams, conversion factors and so forth. In addition, many students see it cumbersome downloading and installing a computer program that they do not need often in their studies. As an attempt to satisfy the academic community needs in the faculty of Engineering in Abou Bekr Belkaid University (Tlemcen, Algeria, we had to devise some Web technologies and techniques to design an interactive virtual space wherein many engineering-related Web applications are accessible on-line. Students and professors can access on-line to properties of many substances, convert physical quantities from and into a variety of units, exploit computer programs on-line without installing them, generate tables and charts, and also, they can use diagrams on-line by means of the mouse. The set of those applications is called a Virtual Calculation Center. This paper goes through the different services that could be implemented in a Virtual Calculation Center, and describes the techniques and technologies used to build those applications.

  17. The Australian Centre for Minesite Rehabilitation Research - an initiative to meet the strategic research needs for sustainable mining rehabilitation

    International Nuclear Information System (INIS)

    Bell, L.C.

    1996-01-01

    The Australian Centre for Minesite Rehabilitation Research (ACMRR) was established through a mining industry initiative to meet the need of industry governments and the community for sustainable systems for land affected by exploration, mining and mineral processing activities. The Centre, which is a consortium of the major groups associated with mining rehabilitation research in Australia, has a focus on both strategic research and technology transfer and combines a wide range of multidisciplinary skills covering engineering and the physical and biological sciences. The paper briefly describes the goals, structure, expertise and research and technology transfer activities of the Centre. The major research program areas of waste rock dump and final void stability, acid mine drainage, tailings disposal and remediation of ecosystem reconstruction are described in the context of national priorities. 3 refs., 1 fig

  18. Les télécentres, centres de communications polyvalents | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    12 juil. 2011 ... ... la raison de leur absence et beaucoup répondent qu'ils ont eu une ... fournisseur de service Internet du télécentre, qui se trouve à Maputo ... Le télécentre s'est révélé être un fournisseur de services utile et recherché par les ...

  19. Results of measurements of emission from internal combustion engines

    International Nuclear Information System (INIS)

    Dimitrovski, Mile; Jovanovska, Vangelica

    1999-01-01

    A mathematical model for solving the emission from internal combustion engines on the cross roads are made. The exhausted pipes from vehicles are substituted with a pipe in a centre of the cross road. This model is proved with measurement made on vehicles in the city of Bitola (Macedonia). (Author)

  20. Role of nuclear engineering in the national power complex

    International Nuclear Information System (INIS)

    Petros'yants, A.M.; Baturov, B.B.

    1981-01-01

    Role of nuclear power in power engineering and fuel-power system of the country in the whole is discussed. Economic advantages of NPP's as compared with thermal power plants for district heating (TPP) are grounded. Advisability of combined production of thermal and electric power at TPP as compared with separate heat generation at NPP for district heating and electric power generation at NPP is reported. Data on perspectives of development of nuclear engineering in the light of ''Main directions of economic and social development of the USSR in 1981-1985 and up to 1990'' are presented. It is concluded that nuclear power introduction into national economy would bring important technical, economic and social consequences. Large-scale NPP construction would result in radical revision of the industry structure in the whole fuel-power system including output and transport on the base of modern technology and recent scientific-technical achievements providing essential economic and national economic effect essentially higher labour productivity in fuel power branches of industry. Besides, nuclear engineering creates conditions for better preservation of environment, reduction of expenditures for power and fuel transport, bringing industry centres nearer to centres of energy consumption as well as pre-conditions for removing threat of the so-called ''power hunger'' [ru

  1. Training centres - organization and management

    International Nuclear Information System (INIS)

    Kovar, P.

    1986-01-01

    In the lecture 'Training centres - organization and management' some principles and requirements which influence the organization, management and activity pattern of nuclear training centres, are briefly introduced. It is demonstrated, step by step, how these general principles are implemented in the development of the Czechoslovak nuclear power programme, it means, how the training of the NPP personnel proceeds in Czechoslovak nuclear training centres. General principles which are selected: a connection between the capacity of the training centre and the scope and needs of the nuclear power programme, a position of the training center within the institutional set-up, a structure and organization of the training system which complies with the system of NPP construction, reflect the pattern and the activity of the nuclear training centre and nuclear power technical level, a research group of workers in the nuclear training centre, main tasks and technical facilities, management of the training process and a transfer of knowledge and research results into the training process. The lecture is supplemented by pictures and slides. (orig.)

  2. Visualising Digital Video Libraries for TV Broadcasting Industry: A User-Centred Approach

    OpenAIRE

    HAESEN, Mieke; MESKENS, Jan; CONINX, Karin

    2009-01-01

    Finding a suitable video fragment in a vast video archive is mostly a complex task. Even professional users have to skim many hours of stored video data before they find the desired content. In this paper, we present a user-centred software engineering approach that is employed to create a novel news video explorer for TV broadcasting industry. This approach helps to ensure the balance between the tech-nological progress in the field of information retrieval on the one hand and the needs and ...

  3. Practical experience and economic aspects of small wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Workshop proceedings presented cover operating experience and development of wind turbines installed in the UK by Northern Engineering Industries plc companies, the Howden aerogenerator installed in Orkney, and the commissioning of a vertical-axis generator in a remote location. The National Wind Turbine Test Centre, the Caithness Wind Project, the South of Scotland Electricity Board's activities, economics of small scale wind power and commercialisation are discussed.

  4. Northern New Mexico regional airport market feasibility

    Energy Technology Data Exchange (ETDEWEB)

    Drake, R.H.; Williams, D.S.

    1998-06-01

    This report is about the market for airline travel in northern New Mexico. Interest in developing a northern New Mexico regional airport has periodically surfaced for a number of years. The New Mexico State Legislature passed a memorial during the 1998 Second Session calling for the conduct of a study to determine the feasibility of building a new regional airport in NNM. This report is a study of the passenger market feasibility of such an airport. In addition to commercial passenger market feasibility, there are other feasibility issues dealing with siting, environmental impact, noise, economic impact, intermodal transportation integration, region-wide transportation services, airport engineering requirements, and others. These other feasibility issues are not analyzed in any depth in this report although none were discovered to be show-stoppers as a by-product of the authors doing research on the passenger market itself. Preceding the need for a detailed study of these other issues is the determination of the basic market need for an airport with regular commercial airline service in the first place. This report is restricted to an in-depth look at the market for commercial passenger air service in NNM. 20 figs., 8 tabs.

  5. The fully integrated biomedical engineering programme at Eindhoven University of Technology.

    Science.gov (United States)

    Slaaf, D W; van Genderen, M H P

    2009-05-01

    The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a bachelor-master's programme with two different master's degrees: Master's Degree in Biomedical Engineering and Master's Degree in Medical Engineering. Recently, the programme has adopted semester programming, has included a major and minor in the bachelor's degree phase, and a true bachelor's degree final project. Details about the programme and data about where graduates find jobs are provided in this paper.

  6. Call Centre- Computer Telephone Integration

    Directory of Open Access Journals (Sweden)

    Dražen Kovačević

    2012-10-01

    Full Text Available Call centre largely came into being as a result of consumerneeds converging with enabling technology- and by the companiesrecognising the revenue opportunities generated by meetingthose needs thereby increasing customer satisfaction. Regardlessof the specific application or activity of a Call centre, customersatisfaction with the interaction is critical to the revenuegenerated or protected by the Call centre. Physical(v, Call centreset up is a place that includes computer, telephone and supervisorstation. Call centre can be available 24 hours a day - whenthe customer wants to make a purchase, needs information, orsimply wishes to register a complaint.

  7. Cost savings from a telemedicine model of care in northern Queensland, Australia.

    Science.gov (United States)

    Thaker, Darshit A; Monypenny, Richard; Olver, Ian; Sabesan, Sabe

    2013-09-16

    To conduct a cost analysis of a telemedicine model for cancer care (teleoncology) in northern Queensland, Australia, compared with the usual model of care from the perspective of the Townsville and other participating hospital and health services. Retrospective cost-savings analysis; and a one-way sensitivity analysis performed to test the robustness of findings in net savings. Records of all patients managed by means of teleoncology at the Townsville Cancer Centre (TCC) and its six rural satellite centres in northern Queensland, Australia between 1 March 2007 and 30 November 2011. Costs for set-up and staffing to manage the service, and savings from avoidance of travel expenses for specialist oncologists, patients and their escorts, and for aeromedical retrievals. There were 605 teleoncology consultations with 147 patients over 56 months, at a total cost of $442 276. The cost for project establishment was $36 000, equipment/maintenance was $143 271, and staff was $261 520. The estimated travel expense avoided was $762 394; this figure included the costs of travel for patients and escorts of $658 760, aeromedical retrievals of $52 400 and travel for specialists of $47 634, as well as an estimate of accommodation costs for a proportion of patients of $3600. This resulted in a net saving of $320 118. Costs would have to increase by 72% to negate the savings. The teleoncology model of care at the TCC resulted in net savings, mainly due to avoidance of travel costs. Such savings could be redirected to enhancing rural resources and service capabilities. This teleoncology model is applicable to geographically distant areas requiring lengthy travel.

  8. Addressing the challenges of patient-centred design

    Directory of Open Access Journals (Sweden)

    Karen LaBat

    2009-11-01

    Full Text Available Patient-centred design is a relatively new term, but a longstanding concept in clinical practice. This discussion looks at patient-centred design and explores the relationships of patient-centred design to universal design, user-centred design and the newer human-centred design. It also explores why interdisciplinary approaches are needed for patient-centred design and how interdisciplinary collaboration works to address the challenges of patient centred design. Successful patient-centred solutions can grow from collaborations which include shared visions, understanding of both the nature and degree of variation in the patient,materials, and the designed solution, clear regular communication among all parties with careful definition of terms, and respect for the inherent cultures of all disciplines involved.

  9. Impact of war on child health in northern Syria: the experience of Médecins Sans Frontières.

    Science.gov (United States)

    Meiqari, Lana; Hoetjes, Maartje; Baxter, Louisa; Lenglet, Annick

    2018-03-01

    Few data are available to evaluate the impact of Syrian war on civilian population; to describe this impact on child health, this article uses data from Médecins Sans Frontières-Operational Centre Amsterdam's activities in Tal-Abyad and Kobane cities, northern Syria (2013-2016). Data were obtained from routine medical datasets and narrative reports, for out-patient clinics, immunisation, nutritional monitoring and assessments, and in-patient care, and were analysed quantitatively and qualitatively. Infections were the largest contributor to morbidity. The proportion of war on the health of children; • Médecins Sans Frontières (MSF-OCA) has worked in northern Syria during different times since 2013. What is New • Quantitative and qualitative analysis of MSF's routine medical data and situtation reports show that one fifth of all consultations in children war, e.g. thalassemia.

  10. Neighbourhood Centres – Organisation, Management and Finance

    DEFF Research Database (Denmark)

    Larsen, Jacob Norvig

    to identify different financial models and analyse economic sustainability. As regards organisational and management models data were collected through documentary sources and by means of personal interviews and field visits to ten centres. Even within the analysed limited population of centres economic...... public subsidy. Some of the centres have high number of users on a daily basis, whereas others are only rarely used. It is explored how organisation, management and financial set-up differs among the centres. Quantitative data on financial issues and annual accounts of fifteen centres were analysed...... and institutional sustainability varies significantly. In organisational terms centres range from fully-integrated in the municipal administration to independent voluntary managed centres. In terms of financial, or economic, models variation is less pronounced as all centres to some degree are dependent on current...

  11. Academic Design Of Canada's Energy Systems And Nuclear Science Research Centre

    International Nuclear Information System (INIS)

    Bereznai, G.; Perera, S.

    2010-01-01

    The University of Ontario Institute of Technology (UOIT) is at the forefront of alternative energy and nuclear research that focuses on the energy challenges that are faced by the province of Ontario, the industrial heartland of Canada. While the university was established as recently as 2002 and opened its doors to its first students in 2003, it has already developed a comprehensive set of undergraduate and graduate programs, and a reputation for research intensiveness. UOIT offers dedicated programs in nuclear engineering and energy systems engineering to ensure a continued supply of trained employees in these fields. The ability to provide talented and skilled personnel to the energy sector has emerged as a critical requirement of ensuring Ontario's energy future, and to meet this need UOIT requires additional teaching and research space in order to offer its energy related programs. The Governments of Canada and of the Province of Ontario recognized UOIT's achievements and contributions to post-secondary education in the field of clean energy in general and nuclear power in particular, and as part of the economic stimuli funded by both levels of government, approved $45 M CAD for the construction of a 10,000 m 2 'Energy Systems and Nuclear Science Research Centre' at UOIT. The building is scheduled to be ready for occupancy in the summer of 2011. The paper presents the key considerations that lead to the design of the building, and gives details of the education and research programs that were the key in determining the design and layout of the research centre. (authors)

  12. 100% of the World Ocean Floor Mapped by 2030 - Contribution of the South and West Pacific Regional Data Assembly and Coordination Centre to the Seabed 2030 Initiative

    Science.gov (United States)

    Lamarche, G.; Neil, H.; Stagpoole, V. M.; Greenland, A.; Mackay, K.; Black, J.; Griffin, E.

    2017-12-01

    The Seabed 2030 SaWPac Centre (South and West Pacific Ocean Regional Data Assembly and Coordination Centre) has been formed to generate new high resolution ocean floor maps of the western and southern Pacific Ocean. The centre is part of the joint Nippon Foundation and the General Bathymetric Chart of the Oceans (GEBCO) initiative to produce a definitive map of the World Ocean floor by 2030, empowering the world to make policy decisions, use the ocean sustainability and undertake scientific research based on detailed bathymetric information of the Earth's seabed. The SaWPac Centre is based at NIWA Wellington (New Zealand) and includes a collaborative partnership with GNS Science and Land Information New Zealand. It is responsible for the region from South America to Australia, north of latitude 50°S to 10° north of the Equator and the western part of the Northern Pacific Ocean to Russia. The region includes the world's deepest trenches and also covers some of the remotest oceans where bathymetric data form existing ship tracks is spaced up to 100 km apart. The challenge for the SaWPac Centre is to collate and combine all the available bathymetric data from the numerous nations that have surveyed in the region. The centre will also promote efforts to collect new data and contribute to map products generated by the Seabed 2030 global mapping project.

  13. Through-life engineering services motivation, theory, and practice

    CERN Document Server

    Roy, Rajkumar

    2015-01-01

    Demonstrating the latest research and analysis in the area of through-life engineering services (TES), this book utilizes case studies and expert analysis from an international array of practitioners and researchers – who together represent multiple manufacturing sectors: aerospace, railway and automotive – to maximize reader insights into the field of through-life engineering services. As part of the EPSRC Centre in Through-life Engineering Services program to support the academic and industrial community, this book presents an overview of non-destructive testing techniques and applications and provides the reader with the information needed to assess degradation and possible automation of through-life engineering service activities . The latest developments in maintenance-repair-overhaul (MRO) are presented with emphasis on cleaning technologies, repair and overhaul approaches and planning and digital assistance. The impact of these technologies on sustainable enterprises is also analyzed. This book wil...

  14. Energy centre microgrid model

    Energy Technology Data Exchange (ETDEWEB)

    Pasonen, R.

    2011-09-15

    A simulation model of Energy centre microgrid made with PSCAD simulation software version 4.2.1 has been built in SGEM Smart Grids and Energy Markets (SGEM) work package 6.6. Microgrid is an autonomous electric power system which can operate separate from common distribution system. The idea of energy centre microgrid concept was considered in Master of Science thesis 'Community Microgrid - A Building block of Finnish Smart Grid'. The name of energy centre microgrid comes from a fact that production and storage units are concentrated into a single location, an energy centre. This centre feeds the loads which can be households or industrial loads. Power direction flow on the demand side remains same compared to the current distribution system and allows to the use of standard fuse protection in the system. The model consists of photovoltaic solar array, battery unit, variable frequency boost converter, inverter, isolation transformer and demand side (load) model. The model is capable to automatically switch to islanded mode when there is a fault in outside grid and back to parallel operation mode when fault is removed. The modelled system responses well to load changes and total harmonic distortion related to 50Hz base frequency is kept under 1.5% while operating and feeding passive load. (orig.)

  15. The CERN Control Centre Setting Standards for the 21st Century

    CERN Document Server

    Manglunki, Django

    2008-01-01

    In 2003, CERN decided to build a unified control centre to replace four of its control rooms: the â€ワMeyrin Control Room” which controlled the PS complex, the â€ワPrevessin Control Room” (PCR) which controlled the SPS and until 2000 LEP, the Technical Control Room (TCR), and the Cryogenics Control Room (QCR). After first contemplating a possible implementation next to the â€ワGlobe of Science and Innovation”, it was decided for budgetary reasons to build the new CERN Control Centre (CCC) on the same location as the PCR. This represented a 50% saving in construction costs as most of the technical infrastructure (computer network, water, electricity, ventilation) was already in place, but added stringent time constraints: civil engineering could not begin before the SPS shutdown in November 2004, yet the room had to be ready for the accelerator operations to resume in March 2006. Although this presented a strict construction schedule, it allowed the project to be completely driven by th...

  16. RTEMS CENTRE- Support and Maintenance CENTRE to RTEMS Operating System

    Science.gov (United States)

    Silva, H.; Constantino, A.; Coutunho, M.; Freitas, D.; Faustino, S.; Mota, M.; Colaço, P.; Zulianello, M.

    2008-08-01

    RTEMS stands for Real-Time Operating System for Multiprocessor Systems. It is a full featured Real Time Operating System that supports a variety of open APIs and interface standards. It provides a high performance environment for embedded applications, including a fixed-priority preemptive/non-preemptive scheduler, a comprehensive set of multitasking operations and a large range of supported architectures. Support and maintenance CENTRE to RTEMS operating system (RTEMS CENTRE) is a joint initiative of ESA-Portugal Task force, aiming to build a strong technical competence in the space flight (on- board) software, to offer support, maintenance and improvements to RTEMS. This paper provides a high level description of the current and future activities of the RTEMS CENTRE. It presents a brief description of the RTEMS operating system, a description of the tools developed and distributed to the community [1] and the improvements to be made to the operating system, including facilitation for the qualification of RTEMS (4.8.0) [2] for the space missions.

  17. Bhabha Atomic Research Centre : annual report 1990

    International Nuclear Information System (INIS)

    1992-01-01

    Research and development (R and D) activities of the Bhabha Atomic Research Centre (BARC) carried out during 1990 are reported. The main thrust of the R and D activities of BARC is on : (1)providing support to the nuclear power programme, (2)designing, building and utilising research reactors, (3)working in related frontline technologies, and also (4)basic research in frontier areas of science. These activities are described in brief under the chapters entitled : (1)Physical Sciences (2)Chemical Sciences (3)Materials and Material Science (4)Radioisotopes (5)Reactions (6)Fuel Cycle (7)Radiological Safety and Protection (8)Electronics and Instrumentation (9)Engineering Services (10)Life Sciences and (11)General. At the end of each chapter a list of papers and reports published in the subject field indicated by the title of the chapter is given. (N.B.). figs., tabs

  18. Development of assessment procedures at the CEGB's nuclear power training centre

    International Nuclear Information System (INIS)

    Chapman, C.R.; Harris, N.D.C.

    1986-01-01

    The work of a power station engineer can be considered under four aspects: technology, diagnosis action and communication. The development, validation and use of assessment procedures can successfully incorporate the same aspects. The purposes of assessment are reporting training achievement and giving feedback to course members and tutorial staff. The development of standardized procedures to produce, evaluate and mark assessments and to optimize feedback ensures objectivity and uniformity. This has been achieved at the Central Electricity Generating Board's Nuclear Power Training Centre by enlisting an educational consultant to provide guidance and assist in training the resident tutors in assessment procedures. (author)

  19. Geological and engineering analysis of residual soil for forewarning landslide from highland area in northern Thailand

    Science.gov (United States)

    Thongkhao, Thanakrit; Phantuwongraj, Sumet; Choowong, Montri; Thitimakorn, Thanop; Charusiri, Punya

    2015-11-01

    One devastating landslide event in northern Thailand occurred in 2006 at Ban Nong Pla village, Chiang Klang highland of Nan province after, a massive amount of residual soil moved from upstream to downstream, via creek tributaries, into a main stream after five days of unusual heavy rainfall. In this paper, the geological and engineering properties of residual soil derived fromsedimentary rocks were analyzed and integrated. Geological mapping, electrical resistivity survey and test pits were carried out along three transect lines together with systematic collection of undisturbed and disturbed residual soil samples. As a result, the average moisture content in soil is 24.83% with average specific gravity of 2.68,whereas the liquid limit is 44.93%, plastic limit is 29.35% and plastic index is 15.58%. The cohesion of soil ranges between 0.096- 1.196 ksc and the angle of internal friction is between 11.51 and 35.78 degrees. This suggests that the toughness properties of soil change when moisture content increases. Results from electrical resistivity survey reveal that soil thicknesses above the bedrock along three transects range from 2 to 9 m. The soil shear strength reach the rate of high decreases in the range of 72 to 95.6% for residual soil from shale, siltstone and sandstone, respectively. Strength of soil decreaseswhen the moisture content in soil increases. Shear strength also decreases when the moisture content changes. Therefore, the natural soil slope in the study area will be stable when the moisture content in soil level is equal to one, but when the moisture content between soil particle increases, strength of soil will decrease resulting in soil strength decreasing.

  20. National Strategies for Staff and Faculty Development in Engineering Education in Denmark

    DEFF Research Database (Denmark)

    Vinther, Ole; Kolmos, Anette

    2002-01-01

    Increasing emphasis is being placed on establishing teaching and learninge centres at the institutional level with the stated objective of improving the quality of teaching and education. The article describes Denmark´s IPN, which consists of five engineering colleges and three universities...

  1. The politics of patient-centred care.

    Science.gov (United States)

    Kreindler, Sara A

    2015-10-01

    Despite widespread belief in the importance of patient-centred care, it remains difficult to create a system in which all groups work together for the good of the patient. Part of the problem may be that the issue of patient-centred care itself can be used to prosecute intergroup conflict. This qualitative study of texts examined the presence and nature of intergroup language within the discourse on patient-centred care. A systematic SCOPUS and Google search identified 85 peer-reviewed and grey literature reports that engaged with the concept of patient-centred care. Discourse analysis, informed by the social identity approach, examined how writers defined and portrayed various groups. Managers, physicians and nurses all used the discourse of patient-centred care to imply that their own group was patient centred while other group(s) were not. Patient organizations tended to downplay or even deny the role of managers and providers in promoting patient centredness, and some used the concept to advocate for controversial health policies. Intergroup themes were even more obvious in the rhetoric of political groups across the ideological spectrum. In contrast to accounts that juxtaposed in-groups and out-groups, those from reportedly patient-centred organizations defined a 'mosaic' in-group that encompassed managers, providers and patients. The seemingly benign concept of patient-centred care can easily become a weapon on an intergroup battlefield. Understanding this dimension may help organizations resolve the intergroup tensions that prevent collective achievement of a patient-centred system. © 2013 John Wiley & Sons Ltd.

  2. Variational analysis and aerospace engineering mathematical challenges for the aerospace of the future

    CERN Document Server

    Mohammadi, Bijan; Pironneau, Olivier; Cipolla, Vittorio

    2016-01-01

    This book presents papers surrounding the extensive discussions that took place from the ‘Variational Analysis and Aerospace Engineering’ workshop held at the Ettore Majorana Foundation and Centre for Scientific Culture in 2015. Contributions to this volume focus on advanced mathematical methods in aerospace engineering and industrial engineering such as computational fluid dynamics methods, optimization methods in aerodynamics, optimum controls, dynamic systems, the theory of structures, space missions, flight mechanics, control theory, algebraic geometry for CAD applications, and variational methods and applications. Advanced graduate students, researchers, and professionals in mathematics and engineering will find this volume useful as it illustrates current collaborative research projects in applied mathematics and aerospace engineering.

  3. Communications strategy for the Chernobyl Centre

    International Nuclear Information System (INIS)

    Kurilchik, Mykola; Green, Len

    2000-01-01

    This Communications Strategy was developed for the International Chernobyl Centre (ICC) as part of a joint UK/Ukraine project, sponsored by the Department of Trade and Industry and NNC Limited. The Plan was developed during four weeks of workshop discussions in the UK between staff from the centre and experienced PR Professionals from NNC Limited. The requirements for a sustained communications activity at the ICC go much further than simply enhancing or promoting the Centre's scientific and technical activities. Raising sufficient awareness of the Centre among potential funding agents and commercial partners is critical to its future development as a major centre for international co-operation and research. It is only through establishing and developing effective communications that the Centre will become well enough known and understood both within the Ukraine, and internationally, to secure its long term future. However, as the workshop programme unfolded, it also became clear that communications was in itself a legitimate and necessary function of the Centre, and part of the foundations of its existence. The Centre has a fundamental role as an 'information exchange', collecting and communicating information from within the Ukraine to the rest of the world, and interpreting world interest and attitudes to the Ukraine Government and nuclear industry. As such compliments the efforts of individual power plant and corporate PR functions within the Ukraine nuclear energy sector

  4. A Blueprint for Success: A Model for Developing Engineering Education in the UK

    Directory of Open Access Journals (Sweden)

    Melanie Rose Nova King

    2014-03-01

    Full Text Available This paper details the emergence and development of the ‘Centre for Engineering and Design Education’ (CEDE at Loughborough University, UK, and provides a blueprint for success. With ample evidence that such a Centre can prove to be a highly effective support mechanism for discipline-specific academics and can develop and maintain valuable national and international networks and collaborations along with considerable esteem for the host university. The CEDE is unique in the UK and has achieved considerable success and recognition within the local engineering education community and beyond for the past 16 years. Here we discuss the historical background of the Centre’s development, the context in which it operates, and its effective management and operation strategy. The success it has enjoyed is described through examples, with much evidence of the generation of a significant amount of external funding; the development of high quality learning spaces; learning technology systems, open source software and improvements in curriculum design; a strong record of research and publication on the pedagogy of engineering; strong links with industry and employers; and a wealth of connections and know-how built up over the years. This paper provides the institutions with a model blueprint for success in developing engineering education.

  5. Discussion on 'Centres of excellence' in Africa

    International Nuclear Information System (INIS)

    Riad, S.

    1999-01-01

    In Africa, Centres of Excellence should be oriented to build up scientific and technological capacity in the four topics of international Monitoring System related technologies, namely, seismic monitoring, hydro acoustic monitoring, infrasound monitoring and radionuclides monitoring. Training programs on these topics should be a major objective. A network of such centres should be established in a number of African countries. Centres should be equipped with means and materials for on-line course dispatch to interested training centres or research institutions. African centres should develop strong relationship among themselves through information and data exchange and sharing, harmonization of training programs. National data centres may be established as a component of the African Centre of Excellence. States Signatories may authorize the establishment of a specific fund to support the activities of the African center

  6. Dewatering of planned Key Lake open pits in northern Saskatchewan

    International Nuclear Information System (INIS)

    Unland, W.; Holl, N.

    1980-01-01

    The engineering design and experience gained so far with a dewatering system for an open-pit uranium mine planned at Key Lake in Northern Saskatchewan are presented. An extensive unconfined overburden aquifer is hydraulically connected with the underlying Athabasca Formation and basement rocks, both of relatively low hydraulic conductivity. The overburden aquifer is embedded in a bedrock trough, with the deepest depression between the planned pits. Hydrogeological data were used in a numerical dewatering model simulating groundwater flow at different stages of the pit development. Based on the model results, the enginering design had to provide for different pumping rates, varying between 1.0 and 0.21 m 3 /sec. This problem was solved by using a double line pressure system. The design concept for the complete peripheral discharge system and the well design used for 26 dewatering wells are discussed. (auth)

  7. Global network on engineering education research and expertise in PBL

    DEFF Research Database (Denmark)

    Enemark, Stig; Kolmos, Anette; Moesby, Egon

    2006-01-01

    in order to facilitate better access to and co-operation within the PBL area. One of the absolute important tasks for UCPBL is to provide evidence for the effectiveness of PBL worldwide. Thus, there is a special attempt to establish links between engineering education researchers in this field....... This involves considerations concerning what is engineering education research – and how do we promote research based staff and educational development.......The UCPBL Centre for Problem Based Learning is based at Aalborg University, Denmark, known world-wide for its successful educational approach based on problem oriented project work. Due to more than 30 years of experience in utilizing PBL-learning principles in Engineering Education, an increasing...

  8. SYNBIOCHEM Synthetic Biology Research Centre, Manchester – A UK foundry for fine and speciality chemicals production

    Directory of Open Access Journals (Sweden)

    Le Feuvre RA

    2016-12-01

    Full Text Available The UK Synthetic Biology Research Centre, SYNBIOCHEM, hosted by the Manchester Institute of Biotechnology at the University of Manchester is delivering innovative technology platforms to facilitate the predictable engineering of microbial bio-factories for fine and speciality chemicals production. We provide an overview of our foundry activities that are being applied to grand challenge projects to deliver innovation in bio-based chemicals production for industrial biotechnology.

  9. European Master of Science in Nuclear Engineering

    International Nuclear Information System (INIS)

    Moons, F.; Safieh, J.; Giot, M.; Mavko, B.; Sehgal, B.R.; Schaefer, A.; Goethem, G. van; D'haeseleer, W.

    2004-01-01

    The need to preserve, enhance or strengthen nuclear knowledge is worldwide recognised since a couple of years. It appears that within the European university education and training network, nuclear engineering is presently sufficiently covered, although somewhat fragmented. To take up the challenges of offering top quality, new, attractive and relevant curricula, higher education institutions should cooperate with industry, regulatory bodies and research centres, and more appropriate funding a.o. from public and private is to be re-established. More, European nuclear education and training should benefit from links with international organisations like IAEA, OECD-NEA and others, and should include world-wide cooperation with academic institutions and research centres. The European master in nuclear engineering guarantees a high quality nuclear education in Europe by means of stimulating student and instructor exchange, through mutual checks of the quality of the programmes offered, by close collaboration with renowned nuclear-research groups at universities and laboratories. The concept for a nuclear master programme consists of a solid basket of recommended basic nuclear science and engineering courses, but also contains advanced courses as well as practical training. Some of the advanced courses also serve as part of the curricula for doctoral programmes. A second important issue identified is Continued Professional Development. In order to achieve the objectives and practical goals described above, the ENEN association was formed. This international, non-profit association is be considered as a step towards a virtual European Nuclear University symbolising the active collaboration between various national institutions pursuing nuclear education. (author)

  10. APPRAISAL OF INFORMATION NEEDS OF ENGINEERS IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Utari Budihardjo

    2011-12-01

    Full Text Available This paper discusses reports of the surveys on information needs of engineers which have been conducted in Indonesia in the last ten years. It also covers technological transformation in Indonesia, such as micro level technology indicator within 10 strategic industries. Various data centers! iriformation centres of different subjects are included in this paper. Based on the above mention surveys, it is concluded that: 1. Communication among information providers and engineers, especially those who are dealing with research and development is still weak. 2. Most engineers in Indonesia are lacking ofiriformation about the availability of S&T information sources in the country.3. Information/data centers are seattered diverse in various subjects and they haven't been linked each other yet. 4. So far, the qualitiy of S&T data/information provided has not met with the industrial development needs in the country. 5 Promotion on information sources haven't reached all engineers especially those who are dealing with R&D activities.

  11. The Aube centre

    International Nuclear Information System (INIS)

    1996-07-01

    This educational booklet is devoted to a general presentation of the Aube radioactive wastes storage centre. After a short presentation of the Andra, the French national agency for the management of radioactive wastes, it gives some general information about radioactive wastes (origin, classification), containers (quality assurance and different types), wastes transportation (planning, safety), and about the Aube centre itself: description, treatment and conditioning of drums (compacting and injection), storage facilities, geological situation of the site, and environmental controls. (J.S.)

  12. Wind Erosion Induced Soil Degradation in Northern China: Status, Measures and Perspective

    Directory of Open Access Journals (Sweden)

    Zhongling Guo

    2014-12-01

    Full Text Available Soil degradation is one of the most serious ecological problems in the world. In arid and semi-arid northern China, soil degradation predominantly arises from wind erosion. Trends in soil degradation caused by wind erosion in northern China frequently change with human activities and climatic change. To decrease soil loss by wind erosion and enhance local ecosystems, the Chinese government has been encouraging residents to reduce wind-induced soil degradation through a series of national policies and several ecological projects, such as the Natural Forest Protection Program, the National Action Program to Combat Desertification, the “Three Norths” Shelter Forest System, the Beijing-Tianjin Sand Source Control Engineering Project, and the Grain for Green Project. All these were implemented a number of decades ago, and have thus created many land management practices and control techniques across different landscapes. These measures include conservation tillage, windbreak networks, checkerboard barriers, the Non-Watering and Tube-Protecting Planting Technique, afforestation, grassland enclosures, etc. As a result, the aeolian degradation of land has been controlled in many regions of arid and semiarid northern China. However, the challenge of mitigating and further reversing soil degradation caused by wind erosion still remains.

  13. GiveMe Shelter: a people-centred design process for promoting independent inquiry-led learning in engineering

    Science.gov (United States)

    Dyer, Mark; Grey, Thomas; Kinnane, Oliver

    2017-11-01

    It has become increasingly common for tasks traditionally carried out by engineers to be undertaken by technicians and technologist with access to sophisticated computers and software that can often perform complex calculations that were previously the responsibility of engineers. Not surprisingly, this development raises serious questions about the future role of engineers and the education needed to address these changes in technology as well as emerging priorities from societal to environmental challenges. In response to these challenges, a new design module was created for undergraduate engineering students to design and build temporary shelters for a wide variety of end users from refugees, to the homeless and children. Even though the module provided guidance on principles of design thinking and methods for observing users needs through field studies, the students found it difficult to respond to needs of specific end users but instead focused more on purely technical issues.

  14. Analysis of different research activities and description of parties within the Swedish Knowledge Centre for Renewable Transportation Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Lundgren, Joakim [Bio4Energy, Luleaa (Sweden); Wallberg, Ola [Lund Univ., Lund (Sweden)

    2012-07-01

    The Swedish Knowledge Centre for Renewable Transportation Fuels (f3) is a nationwide centre, which through cooperation and a systems approach will contribute to the development of sustainable fossil free fuels for transportation. The centre will, through joint efforts by the centre partners, perform syntheses of current research about the production of renewable fuels as well as supplementing research, such as comparative systems analyses of fuels, processes, raw materials and plant design. f3 provides a platform for collaboration between centre partners, with a common vision of sustainable fuels for transportation and common objectives. The centre partners include Sweden's most active universities and research institutes within the field, as well as a number of highly relevant industrial companies. New fuels will be an important component of a strategy to reduce both greenhouse gas emissions and our dependence on petroleum. The Swedish Government has established a vision for the Swedish transport industry to function without fossil fuels by 2030. Such a development requires a concerted response, with participation from all stake holders. Swedish researchers in various disciplines and at various colleges and institutes have a unique breadth and they are at the forefront in several areas of knowledge appropriate for a centre for renewable fuels. Through collaboration, f3 should help to link engineering and systems research and communicate results and conclusions from these research efforts. Within the f3 centre, several parties with different research activities are represented. This document is a snapshot of the different parties at the end of 2011 where the stake holders are described and their current research is highlighted. Also, the different projects conducted by the parties have been categorized and presented at the end of the document.

  15. Ankara Historic City Centre Restoration Site Conservation Plan, its Characteristics, and Rationales for its Revocation

    Directory of Open Access Journals (Sweden)

    Mehmet Tuncer

    2013-12-01

    Full Text Available This is a comprehensive evaluation of the 1: 5000 Ankara Historic City Centre Restoration Site Conservation Master Development Plan and the 1: 1000 Conservation Implementation Plans, which have become a matter of litigation against the Ankara Metropolitan Municipality, filed by various non-governmental organizations, universities, the Union of Chambers of Turkish Architects and Engineers (TMMOB and public institutions; in terms of the environment, transportation and traffic as regards the entirety of the planned location, and the integrity of the plan, based on conservation-reclamation planning essentials and public interest. Thus the Ulus Ankara Historic City Centre Restoration Site Conservation Master Development and Implementation Plan and Plan Notes as ratified by the Ankara Metropolitan Municipality and Conservation Board, are examined in this context in terms of restoration site, protected site, conservation site, interaction and transition sites and historic and cultural properties.

  16. Benchmarking care for very low birthweight infants in Ireland and Northern Ireland.

    LENUS (Irish Health Repository)

    Murphy, B P

    2012-01-31

    BACKGROUND: Benchmarking is that process through which best practice is identified and continuous quality improvement pursued through comparison and sharing. The Vermont Oxford Neonatal Network (VON) is the largest international external reference centre for very low birth weight (VLBW) infants. This report from 2004-7 compares survival and morbidity throughout Ireland and benchmarks these results against VON. METHODS: A standardised VON database for VLBW infants was created in 14 participating centres across Ireland and Northern Ireland. RESULTS: Data on 716 babies were submitted in 2004, increasing to 796 babies in 2007, with centres caring for from 10 to 120 VLBW infants per year. In 2007, mortality rates in VLBW infants varied from 4% to 19%. Standardised mortality ratios indicate that the number of deaths observed was not significantly different from the number expected, based on the characteristics of infants treated. There was no difference in the incidence of severe intraventricular haemorrhage between all-Ireland and VON groups (5% vs 6%, respectively). All-Ireland rates for chronic lung disease (CLD; 15-21%) remained lower than rates seen in the VON group (24-28%). The rates of late onset nosocomial infection in the all-Ireland group (25-26%) remained double those in the VON group (12-13%). DISCUSSION: This is the first all-Ireland international benchmarking report in any medical specialty. Survival, severe intraventricular haemorrhage and CLD compare favourably with international standards, but rates of nosocomial infection in neonatal units are concerning. Benchmarking clinical outcomes is critical for quality improvement and informing decisions concerning neonatal intensive care service provision.

  17. Centre for urban ecotechnology in ``Oeksnehallen``

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Lord Mayor`s Department of the municipality of Copenhagen, Denmark, has with support from this project made a proposal for the establishment of the Centre for Urban Ecotechnology in ``Oeksnehallen``, located in the Vesterbro area of the city. The centre should contribute to the dissemination of knowledge on ecological techniques (regarding passive solar energy etc.) to the inhabitants of Vesterbro and other citizens of Copenhagen, and also serve as a centre in an European context. The ecological demonstration centre will cover an area of two thousand square meters and will also include a cafe, a room for showing coloured slides, facilities for exhibitions created by the center and interested firms etc. The centre should play an important role as part of the ecological concept of urban renewal in Vesterbro. (author).

  18. Netherlands Reactor Centre

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Briefly reviews the last year's work of the twenty year old Netherlands Reactor Centre (RCN) in the fields of reactor safety, fissile material, nuclear fission, non-nuclear energy systems and overseas co-operation. The annual report thus summarised is the last one to appear under the name of RCN. The terms of reference of the organisation having been broadened to include research into energy supply in general, it is to be known in future as the Netherlands Energy Research Centre (ECN). (D.J.B.)

  19. European master degree in nuclear engineering

    International Nuclear Information System (INIS)

    Ghitescu, Petre; Prisecaru, Ilie

    2003-01-01

    In order to preserve and to improve the quality of nuclear engineering education and training in Europe, as well to ensure the safe and economic operation of nuclear power plants, the European Nuclear Engineering Network Program (ENEN) started in 2002. It is a program aiming to establish and maintain a set of criteria for specific curricula of nuclear engineering education, in particular, for an European Master Degree in Nuclear Engineering (EMNE). The ENEN program is financed by the FP5 and has the wide support of IAEA, OECD and EU Commission departments dealing with the nuclear engineering knowledge management. The promising results up to now determined the creation of the Asian Nuclear Engineering Network (ANEN) in July 2003 and of the World Nuclear University (WNU) starting in September 2003. The paper presents the future structure of EMNE which will allow the harmonization of the curricula of the universities of Europe until the Bologna Convention will be fully accepted and operational in all European countries. The ENEN program has taken into consideration the curricula of 22 universities and research centres from 15 different European countries and proposed a feasible scheme which allows the undergraduates with a weak to strong nuclear background to continue their graduate education in the nuclear engineering field towards EMNE. As one of the contractors of this program, University 'Politehnica' of Bucharest brings its contribution and actively takes part in all activities establishing the EMNE. (author)

  20. Fuel cycle centres

    International Nuclear Information System (INIS)

    Hagen, M.

    1977-01-01

    The concept of co-locating and integrating fuel cycle facilities at one site is discussed. This concept offers considerable advantages, especially in minimizing the amount of radioactive material to be transported on public roads. Safeguards and physical protection as relating to such an integrated system of facilities are analysed in detail, also industrial and commercial questions. An overall risk-benefit evaluation turns out to be in favour of fuel cycle centres. These centres seem to be specifically attractive with regard to the back end of the fuel cycle, including on-site disposal of radioactive wastes. The respective German approach is presented as an example. Special emphasis is given to the site selection procedures in this case. Time scale and cost for the implementation of this concept are important factors to be looked at. Since participation of governmental institutions in these centres seems to be indispensable their respective roles as compared to industry must be clearly defined. The idea of adjusting fuel cycle centres to regional rather than national use might be an attractive option, depending on the specific parameters in the region, though results of existing multinational ventures are inconclusive in this respect. Major difficulties might be expected e.g. because of different national safety regulations and standards as well as commercial conditions among partner countries. Public acceptance in the host country seems to be another stumbling block for the realization of this type of multinational facilities

  1. PM 2.5 and NO 2 assessment in 21 European study centres of ECRHS II: annual means and seasonal differences

    Science.gov (United States)

    Hazenkamp-von Arx, Marianne E.; Götschi, Thomas; Ackermann-Liebrich, Ursula; Bono, Roberto; Burney, Peter; Cyrys, Josef; Jarvis, Deborah; Lillienberg, Linnea; Luczynska, Christina; Maldonado, Jose A.; Jaén, Angeles; de Marco, Roberto; Mi, Yahong; Modig, Lars; Bayer-Oglesby, Lucy; Payo, Felix; Soon, Argo; Sunyer, Jordi; Villani, Simona; Weyler, Joost; Künzli, Nino

    The follow-up of cohorts of adults from more than 20 European centres of the former ECRHS I (1989-1992) investigates long-term effects of exposure to ambient air pollution on respiratory health, in particular asthma and change of pulmonary function. Since PM 2.5 is not routinely monitored in Europe, we measured PM 2.5 concentrations in 21 participating centres to estimate 'background' exposure in these cities. Winter (November-February), summer (May-August) and annual mean (all months) values of PM 2.5 were determined from measuring periods between June 2000 and November 2001. Sampling was conducted for 7 days per month for a year. Annual and winter mean concentrations of PM 2.5 vary substantially being lowest in Iceland and highest in centres in Northern Italy. Annual mean concentrations ranged from 3.7 to 44.9 μg m -3, winter mean concentrations from 4.8 to 69.2 μg m -3, and summer mean concentrations from 3.3 to 23.1 μg m -3. Seasonal variability occurred but did not follow the same pattern across all centres. Therefore, ranking of centres varied from summer to winter. Simultaneously, NO 2 concentrations were measured using passive sampling tubes. Annual mean NO 2 concentrations range from 4.9 to 72.1 μg m -3 with similar seasonal variations across centres and constant ranking of centres between seasons. The correlation between annual NO 2 and PM 2.5 concentrations is fair (Spearman correlation coefficient rs=0.75), but when considered as monthly means the correlation is far less consistent and varies substantially between centres. The range of PM 2.5 mass concentrations obtained in ECRHS II is larger than in other current cohort studies on long-term effects of air pollution. This substantial variation in PM 2.5 exposure will improve statistical power in future multi-level health analyses and to some degree may compensate for the lack of information on within-city variability. Seasonal means may be used to indicate potential differences in the toxicity

  2. Preparation of emergency care centre exercises

    International Nuclear Information System (INIS)

    Schnadt, H.; Miska, H.

    2011-01-01

    Setup and operation of emergency care centres (sometimes also addressed as emergency reception centres) are part of emergency response in the environs of nuclear power plants. The preparation of an exercise scenario for such a centre is very demanding on the responsible agency. Therefore, a computer code has been developed which helps to translate the exercise objectives into instructions for figurants which simulate the affected population. These instructions are intended to steer a determined flow of people through the emergency care centre by providing fictitious radiological readings and by injecting the demand for additional actions of response personnel by statements and questions. (orig.)

  3. 19 September 2011 - Japan Science and Technology Agency President K. Kitazawa visiting the LHC superconducting magnet test hall with engineer M. Bajko; the ATLAS visitor centre with Collaboration Former Spokesperson P. Jenni and Senior Scientist T. Kondo; signing the guest book with Adviser R.Voss and Head of International Relations F. Pauss.

    CERN Multimedia

    2011-01-01

    19 September 2011 - Japan Science and Technology Agency President K. Kitazawa visiting the LHC superconducting magnet test hall with engineer M. Bajko; the ATLAS visitor centre with Collaboration Former Spokesperson P. Jenni and Senior Scientist T. Kondo; signing the guest book with Adviser R.Voss and Head of International Relations F. Pauss.

  4. Council celebrates CERN Control Centre

    CERN Multimedia

    2006-01-01

    With the unveiling of its new sign, the CERN Control Centre was officially inaugurated on Thursday 16 March. To celebrate its startup, CERN Council members visited the sleek centre, a futuristic-looking room filled with a multitude of monitoring screens.

  5. Predictive piston motion control in a free-piston internal combustion engine

    Energy Technology Data Exchange (ETDEWEB)

    Mikalsen, R.; Jones, E.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, Newcastle University, Newcastle upon Tyne, NE1 7RU England (United Kingdom)

    2010-05-15

    A piston motion controller for a free-piston internal combustion engine is presented. To improve dynamic performance in the control of the piston motion and engine compression ratio, the controller response is determined from a prediction of engine top dead centre error rather than the measured value from the previous cycle. The proposed control approach showed superior performance compared with that of standard PI feedback control known from the literature due to a reduced control action time delay. The manipulation of fuel injection timing to reduce in-cylinder pressure peaks and cycle-to-cycle variations was also studied, indicating that with the piston motion estimation, the injection timing is a powerful control variable for this purpose. (author)

  6. A Bibliometric Analysis of Climate Engineering Research

    Science.gov (United States)

    Belter, C. W.; Seidel, D. J.

    2013-12-01

    The past five years have seen a dramatic increase in the number of media and scientific publications on the topic of climate engineering, or geoengineering, and some scientists are increasingly calling for more research on climate engineering as a possible supplement to climate change mitigation and adaptation strategies. In this context, understanding the current state of climate engineering research can help inform policy discussions and guide future research directions. Bibliometric analysis - the quantitative analysis of publications - is particularly applicable to fields with large bodies of literature that are difficult to summarize by traditional review methods. The multidisciplinary nature of the published literature on climate engineering makes it an ideal candidate for bibliometric analysis. Publications on climate engineering are found to be relatively recent (more than half of all articles during 1988-2011 were published since 2008), include a higher than average percentage of non-research articles (30% compared with 8-15% in related scientific disciplines), and be predominately produced by countries located in the Northern Hemisphere and speaking English. The majority of this literature focuses on land-based methods of carbon sequestration, ocean iron fertilization, and solar radiation management and is produced with little collaboration among research groups. This study provides a summary of existing publications on climate engineering, a perspective on the scientific underpinnings of the global dialogue on climate engineering, and a baseline for quantitatively monitoring the development of climate engineering research in the future.

  7. Completing the cycle : Energy and Resource Recovery Centres

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, D. [Pearl Earth Sciences, Corp., Ajax, Ontario (Canada)]. E-mail: ddickson@pearlearth.com

    2006-07-01

    Pearl Earth Sciences, Corp.'s Energy and Resource Recovery Centres support technologies that will provide long-term environmental and economical benefits to industry and society at large. Using a closed-loop production process with zero emissions we offer producers of waste a solution for their end of life products. Our prime goals are to have the flexibility to respond to individual waste market challenges using innovative ultra-high-temperature plasma conversion technology and to focus on the production of value-added industrial products such as a clean synthesis gas (ProGaz), Hydrogen, metals and other recovered materials. The syn-gas with its high hydrogen content can be used in the emerging 'distributed power generation' markets, to power automotive, stationary and portable fuel cells, as well as Internal Combustion Engine (ICE) vehicles; chemical processing or direct feed to a pipeline.

  8. Completing the cycle : Energy and Resource Recovery Centres

    International Nuclear Information System (INIS)

    Dickson, D.

    2006-01-01

    Pearl Earth Sciences, Corp.'s Energy and Resource Recovery Centres support technologies that will provide long-term environmental and economical benefits to industry and society at large. Using a closed-loop production process with zero emissions we offer producers of waste a solution for their end of life products. Our prime goals are to have the flexibility to respond to individual waste market challenges using innovative ultra-high-temperature plasma conversion technology and to focus on the production of value-added industrial products such as a clean synthesis gas (ProGaz), Hydrogen, metals and other recovered materials. The syn-gas with its high hydrogen content can be used in the emerging 'distributed power generation' markets, to power automotive, stationary and portable fuel cells, as well as Internal Combustion Engine (ICE) vehicles; chemical processing or direct feed to a pipeline

  9. A Multi-Proxy Analysis of two Loess-Paleosol Sequences in the Northern Harz Foreland

    Science.gov (United States)

    Krauss, Lydia; Zens, Joerg; Zeeden, Christian; Schulte, Philipp; Eckmeier, Eileen; Lehmkuhl, Frank

    2016-04-01

    Within the second phase of the "Collaborative Research Centre 806 (CRC806) - Our Way to Europe - Culture-Environment Interaction and Human Mobility in the Late Quaternary" two loess-paleosol sections in the northern Harz foreland are being investigated. The region is part of the Northern European loess belt. The northern edge of the loess distribution is characterized by an interlocking of Weichselian silt and sand sized aeolian sediments. To the south the Northern European loess belt is limited by the central German uplands (Mittelgebirge). Here the continuous loess cover disperses into separated loess basins. In comparison to relatively long, continuous and intensively studied sections, e.g. along the Rhine river, investigations on loess-paleosol sequences in the northern Harz foreland have been sparse so far. In 2006 REINECKE created an overview of Pleistocene landscape developments by investigating terrace sequences and loess sections in this area. Due to improvements of research methods over the last ten years, the two loess-paleosol sequences Hecklingen and Zilly are being reinvestigated. Aiming towards a better understanding of the paleoenvironmental conditions during the Weichselian in an area close to the Scandinavian ice sheet, results from grain size, geochemical (XRF, CNS) and color measurements are combined. The results show an increased input of aeolian material during the last glacial maximum and the last cover loess period, supporting the theory of dryer and colder conditions during this time frame. Further, we can see a stronger short distant input within the recent soil and during the last glacial maximum in both profiles. In Hecklingen this is also observed within the MIS 3 soil material. Since soil material dating to the MIS 3 is present, we can assume that surface processes where less intrusive during the MIS 3 and 2 as in e.g. the Lower Rhine Embayment. REINECKE, V. (2006): Untersuchungen zur mittel- und jungpleistozänen Reliefentwicklung und

  10. Recent trends in superalloys research for critical aero-engine components

    Energy Technology Data Exchange (ETDEWEB)

    Remy, Luc [Mine ParisTech, CNRS UMR 7633, 91 - Evry (France). Centre des Materiaux; Guedou, Jean-Yves [Snecma Safran Group, Moissy-Cramayel (France). Materials and Processes Dept.

    2010-07-01

    This paper is a brief survey of common research activity on superalloys for aero-engines between Snecma and Mines ParisTech Centre des Materiaux during recent years. First in disks applications, the development of new powder metallurgy superalloys is shown. Then grain boundary engineering is investigated in a wrought superalloy. Secondly, design oriented research on single crystals blades is shown: a damage model for low cycle fatigue is used for life prediction when cracks initiated at casting pores. The methodology developed for assessing coating life is illustrated for thermal barrier coating deposited on AMI single crystal superalloy. (orig.)

  11. [Human Papilloma Virus (HPV), cervical cancer incidence and screening uptake: differences among Northern, Central and Southern Italy].

    Science.gov (United States)

    Giorgi Rossi, Paolo; Chini, Francesco; Borgia, Piero; Guasticchi, Gabriella; Carozzi, Francesca Maria; Confortini, Massimo; Angeloni, Claudio; Buzzoni, Carlotta; Buonaguro, Franco Maria

    2012-01-01

    this article presents a review of evidences about Human Papillomavirus (HPV) and cervical cancer in Italy, highlighting geographical differences. two systematic reviews recently published were updated, one collecting studies on the prevalence of HPV types in Italy in the general population and the other collecting prevalence of HPV types in cervical pathologic samples.The search was updated to 31.10.2010 and performed exclusively in MedLine and references in retrieved papers. the prevalence of HPV types has been related with the incidence of cervical cancer and the spread of Pap tests and screening programs. the prevalence high risk HPV types is 8%in studies with population-based random sample, with no significant difference between Centre-North and South-Islands, however, the prevalence is slightly higher in the South than the Centre-North for women up to 54 years of age, whereas in older women the ratio is reversed. HPV 16 is the most common type, while HPV 18 is less frequent, 5% and 1% respectively. The average of HPV 16 positivity is 64% and 68% in CIN2/3 and invasive cancer respectively, while the average of HPV 18 is 7% and 11% in CIN2/3 and invasive cancer respectively. There are no significant differences by geographical area.The incidence of invasive cervical cancer in Italy has been decreasing in recent years changing from 9.2 to 7.7 per 100,000 inhabitants in 10 years. The incidence is lower in South-Islands. Pap test coverage is over 80% in Centre-North and less than 60%in South-Islands. cervical cancer incidence is lower in Southern Italy, while the Pap test coverage is much higher in Centre-Northern Italy. This paradox, until now, has been interpreted as a consequence of a lower HPV prevalence in Southern than Northern regions. Recent studies on HPV prevalence do not confirm this hypothesis. Our interpretation is that in Southern Italy we are facing an epidemiologic scenario in transition where the low cancer incidence is the consequence of a low HPV

  12. Nature: a colour comparison between Northern South Africa and Northern Australia

    CSIR Research Space (South Africa)

    Baumbach, J

    2009-10-01

    Full Text Available During 1983 DSTO in Australia measured the reflectances of grass, trees and soil in northern Australia, using a custom-build spectroradiometer. During 2002 CSIR in South Africa performed similar measurements in northern South Africa, using a...

  13. The Centres for Environment-friendly Energy Research (FME)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    High expectations for Norway's Centres for Environment-friendly Energy Research (FME).The FME centres address a broad range of areas, allcentral to developing the energy sector of the future. The activities of the eight centres established in 2009 focus on renewable energy, raising energy efficiency, energy planning, and carbon capture and storage (CCS). In 2011 three new FME centres were established which focus on social science-related energy research. The FME scheme is a direct follow-up of the broad-based political agreement on climate policy achieved in the Storting in January 2008, and of the national RandD Energi21 strategy submitted in February 2008 to the Ministry of Petroleum and Energy. In April 2008 the Research Council of Norway's Executive Board decided to launch a process to establish centres for environment-friendly energy research, and a funding announcement was issued that same year. In 2010 it was decided that additional FME centres would be established in the field of social science-related energy research. After a thorough assessment of each project (based on feasibility, scientific merit, potential to generate value creation and innovation, and composition of the consortium) eight applicants were selected to become FME centres in February 2009. A new call for proposals was issued in 2010, and three more centres were awarded FME status in February 2011. The objective of the FME scheme is to establish time-limited research centres which conduct concentrated, focused and long-term research of high international calibre in order to solve specific challenges in the energy sphere. The selected centres must exhibit higher goals, a longer-term perspective and a more concentrated focus than is required under other funding instruments for the same scientific area. The make-up of the centres is critical to achieving this objective. The centres bring together Norway's leading research institutions and key players in private enterprise, the

  14. Training and teaching with SILOETTE reactor and associated simulators at the Nuclear Research Centre of Grenoble

    International Nuclear Information System (INIS)

    Destot, M.

    1983-10-01

    Thanks to its three reactors SILOE (35 MW), MELUSINE (8 MW) and SILOETTE (100 KW), the Reactor Department of the Nuclear Research Centre of Grenoble has gained a considerable experience in the operation and utilization of research and material testing reactors. Inside of this general framework, the Reactor Department of Grenoble has built up a training and teaching centre that has been permanently active since 1975, with the aim of satisfying the considerable needs arising from the development of electro-nuclear power stations. The course is mainly intended for engineers and technicians who will be responsible for running power stations. A thorough series of practical exercices, carried out in the SILOETTE training reactor and in a PWR or in a Gas Cooled Reactor Simulator, desmonstrates the application of the theorical courses and familiarises the trainees with the behaviour of reactors and power stations

  15. The centre of mass of a triangular plate

    International Nuclear Information System (INIS)

    Sluesarenko, Viktor; Rojas, Roberto; Fuster, Gonzalo

    2008-01-01

    We present a derivation for the coordinates of the centre of mass-or centre of gravity-of a homogeneous triangular plate by using scaling and symmetry. We scale the triangular plate by a factor of 2 and divide its area into four plates identical to the original. By symmetry, we assert that the centre of mass of two identical masses lies at the midpoint of the line joining their centres of mass. By relating the centres of mass of the original to those of the scaled plates, we find the coordinates of the centre of mass as the solution of an algebraic equation

  16. Community Documentation Centre on Industrial Risk. Volume 3 (consolidated volume containing also content of vol. 1 and 2)

    International Nuclear Information System (INIS)

    1990-09-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  17. Hydropower engineering. Paper no. IGEC-1-005

    International Nuclear Information System (INIS)

    Cervantes, M.

    2005-01-01

    Hydropower, one of the corner stones of sustainable energy development, is the largest renewable source of energy. There is a large demand worldwide for people trained to design, operate, maintain and optimise hydropower systems. Hydro Power University, a name which encompasses both education, research and development within hydropower in Sweden, offers a unique and broad international masters programme within hydropower engineering including civil, mechanical and electrical engineering. The programme is the result of a close collaboration between Lulea University of Technology and Uppsala University, at the research and education level. This master programme, Hydropower Engineering, is open to both Swedish and foreign students free of charge. It aims to provide students with state of the art knowledge and experience on parts of the hydropower system such as turbine technology, generator design, rotor dynamics, tribology, dams/dam safety, maintenance and operation and environmental aspects. World unique laboratory experiments are offered to the students at Porjus and Alvkarleby, Sweden. The Porjus Hydropower Centre offers world unique facilities: two full scale turbines of 10 MW each, one with the latest generator technology - Powerformer. The turbines are exclusively dedicated for use in education, research and development. State of the art in measurement technology is available. Both units are at the centre of each education programme offered by the Hydro Power University. In Alvkarleby, spillways, discharge capacity and turbines model testing can be undertaken at the Vattenfall laboratory also with state of the art experimental material and highly qualified staff. The large number of applications from developing countries indicates a need of scholarships, which needs to be resolved for the development of hydropower. (author)

  18. The Bruce Energy Centre

    International Nuclear Information System (INIS)

    Jones, R.I.

    1982-06-01

    The Bruce Energy Centre Development Corporation is a joint venture of the Ontario Energy Corporation and 6 private companies formed to market surplus steam from the Bruce Nuclear Power Development. The corporation will also sell or lease land near Bruce NPD. The Bruce Energy Centre has an energy output of 900 BTU per day per dollar invested. Potential customers include greenhouse operators, aquaculturalists, food and beverage manufacturers, and traditional manufacturers

  19. Launch of the London Centre for Nanotechnology.

    Science.gov (United States)

    Aeppli, Gabriel; Pankhurst, Quentin

    2006-12-01

    Is nanomedicine an area with the promise that its proponents claim? Professors Gabriel Aeppli and Quentin Pankhurst explore the issues in light of the new London Centre for Nanotechnology (LCN)--a joint enterprise between Imperial College and University College London--opened on November 7, 2006. The center is a multidisciplinary research initiative that aims to bridge the physical, engineering and biomedical sciences. In this interview, Professor Gabriel Aeppli, LCN co-Director, and Deputy Director Professor Quentin Pankhurst discuss the advent and future role of the LCN with Nanomedicine's Morag Robertson. Professor Aeppli was formerly with NEC, Bell Laboratories and MIT and has more than 15 years' experience in the computer and telecommunications industry. Professor Pankhurst is a physicist with more than 20 years' experience of working with magnetic materials and nanoparticles, who now works closely with clinicians and medics on innovative healthcare applications. He also recently formed the new start-up company Endomagnetics Inc.

  20. Visits to Tier-1 Computing Centres

    CERN Multimedia

    Dario Barberis

    At the beginning of 2007 it became clear that an enhanced level of communication is needed between the ATLAS computing organisation and the Tier-1 centres. Most usual meetings are ATLAS-centric and cannot address the issues of each Tier-1; therefore we decided to organise a series of visits to the Tier-1 centres and focus on site issues. For us, ATLAS computing management, it is most useful to realize how each Tier-1 centre is organised, and its relation to the associated Tier-2s; indeed their presence at these visits is also very useful. We hope it is also useful for sites... at least, we are told so! The usual participation includes, from the ATLAS side: computing management, operations, data placement, resources, accounting and database deployment coordinators; and from the Tier-1 side: computer centre management, system managers, Grid infrastructure people, network, storage and database experts, local ATLAS liaison people and representatives of the associated Tier-2s. Visiting Tier-1 centres (1-4). ...

  1. Patient-centred outcomes research: perspectives of patient stakeholders.

    Science.gov (United States)

    Chhatre, Sumedha; Gallo, Joseph J; Wittink, Marsha; Schwartz, J Sanford; Jayadevappa, Ravishankar

    2017-11-01

    To elicit patient stakeholders' experience and perspectives about patient-centred care. Qualitative. A large urban healthcare system. Four patient stakeholders who are prostate cancer survivors. Experience and perspectives of patient stakeholders regarding patient-centred care and treatment decisions. Our patient stakeholders represented a diverse socio-demographic group. The patient stakeholders identified engagement and dialogue with physicians as crucial elements of patient-centred care model. The degree of patient-centred care was observed to be dependent on the situations. High severity conditions warranted a higher level of patient involvement, compared to mild conditions. They agreed that patient-centred care should not mean that patients can demand inappropriate treatments. An important attribute of patient-centred outcomes research model is the involvement of stakeholders. However, we have limited knowledge about the experience of patient stakeholders in patient-centred outcomes research. Our study indicates that patient stakeholders offer a unique perspective as researchers and policy-makers aim to precisely define patient-centred research and care.

  2. Smart work centres in rural areas

    DEFF Research Database (Denmark)

    Lorentzen, Anne Birte

    This paper discusses the establishment of telework centres as an element in local development strategies in rural areas, with a particular view to two new telework centres in region North Denmark. The paper argues that telework centres do not represent an easy solution to problems of local...... development and environmental sustainability, and further, that technology may not even be the most important feature needed to make them function as such....

  3. Titan's Stratospheric Condensibles at High Northern Latitudes During Northern Winter

    Science.gov (United States)

    Anderson, Carrie; Samuelson, R.; Achterberg, R.

    2012-01-01

    The Infrared Interferometer Spectrometer (IRIS) instrument on board Voyager 1 caught the first glimpse of an unidentified particulate feature in Titan's stratosphere that spectrally peaks at 221 per centimeter. Until recently, this feature that we have termed 'the haystack,' has been seen persistently at high northern latitudes with the Composite Infrared Spectrometer (CIRS) instrument onboard Cassini, The strength of the haystack emission feature diminishes rapidly with season, becoming drastically reduced at high northern latitudes, as Titan transitions from northern winter into spring, In contrast to IRIS whose shortest wavenumber was 200 per centimeter, CIRS extends down to 10 per centimeter, thus revealing an entirely unexplored spectral region in which nitrile ices have numerous broad lattice vibration features, Unlike the haystack, which is only found at high northern latitudes during northern winter/early northern spring, this geometrically thin nitrile cloud pervades Titan's lower stratosphere, spectrally peaking at 160 per centimeter, and is almost global in extent spanning latitudes 85 N to 600 S, The inference of nitrile ices are consistent with the highly restricted altitude ranges over which these features are observed, and appear to be dominated by a mixture of HCN and HC3N, The narrow range in altitude over which the nitrile ices extend is unlike the haystack, whose vertical distribution is significantly broader, spanning roughly 70 kilometers in altitude in Titan's lower stratosphere, The nitrile clouds that CIRS observes are located in a dynamically stable region of Titan's atmosphere, whereas CH4 clouds, which ordinarily form in the troposphere, form in a more dynamically unstable region, where convective cloud systems tend to occur. In the unusual situation where Titan's tropopause cools significantly from the HASI 70.5K temperature minimum, CH4 should condense in Titan's lower stratosphere, just like the aforementioned nitrile clouds, although

  4. The ideal Atomic Centre

    International Nuclear Information System (INIS)

    Mas, R.

    1965-01-01

    The author presents considerations which should prove to be of interest to all those who have to design, to construct and to operate a nuclear research centre. A large number of the ideas presented can also be applied to non-nuclear scientific research centres. In his report the author reviews: various problems with which the constructor is faced: ground-plan, infrastructure, buildings and the large units of scientific equipment in the centre, and those problems facing the director: maintenance, production, supplies, security. The author stresses the relationship which ought to exist between the research workers and the management. With this aim in view he proposes the creation of National School for Administration in Research which would train administrative executives for public or private organisations; they would be specialised in the fields of fundamental or applied research. (author) [fr

  5. Prospects for enhancement of critical current of HTSC: thin films with artificial pinning centres

    Energy Technology Data Exchange (ETDEWEB)

    Mozhaev, P.B. (Institute of Physics and Technology RAS, Moscow (Russian Federation)); Mozhaev, J.E.; Khoryushin, A.V.; Bindslev Hansen, J.; Jacobsen, C.S. (Technical Univ. of Denmark, Dept. of Physics, Kgs. Lyngby (Denmark)); Kotelyanskil, I.M.; Luzanov, V.A. (Institute of Radio Engineering and Electronics RAS, Moscow (Russian Federation)); Puriy, A.V. (Moscow Institute of Physics and Technology, Moscow (Russian Federation)); Yurchenko, V.; Johansen, T. (Univ. of Oslo, Dept. of Physics, Oslo (Norway))

    2008-10-15

    Improvement of the critical current of YBCO thin films and heterostructures remains one of the main tasks for fabrication of modern superconducting wires and connectors. Possible ways of achieving the goal are choice of superconductor composition, engineering of artificial pinning centres, and combination of the superconducting layer with other materials. The team of the Department of Physics at Technical University of Denmark is working in all these fields and this paper is a short review of our achievements in an attempt to improve the critical current density of YBCO thin films. (au)

  6. Regional differences in renal replacement therapy in northern Norway 2000-2012.

    Science.gov (United States)

    Norum, Jan; Leivestad, Torbjørn; Eriksen, Bjørn Odvar; Skår, Siw; Fagerheim, Anne; Reisæter, Anna Varberg

    2015-01-01

    Distance from residence location to a centre for renal replacement therapy (RRT) may influence patients' quality of life and prognosis. Northern Norway constitutes 45% of Norway's landmass, but has less than 10% of the population. In this study, we analysed all patients in northern Norway consecutively registered in the Norwegian Renal Registry during 2000-2012. A total of 634 patients (Nordland County 321 patients, Troms County 215 patients and Finnmark County 98 patients) were investigated. There were more smokers (31% vs. 22%) and patients with diabetes (32% vs. 22%) in Finnmark, but the difference did not reach statistical significance. Patients undergoing RRT and living in Finnmark County had a significantly worse outcome (P=0.03). The median survivals after initiation of RRT were 3.8 years (Finnmark), 6.4 years (Troms) and 5.4 years (Nordland), respectively. The most common causes of death were cardiovascular disease (53%), infections (16%), withdrawal from therapy (15%) and malignancy (13%). In a Cox analysis, age (P<0.0001), diabetes (P=0.008) and smoking at any time (P<0.004) were individual factors correlated with inferior prognosis. Age, smoking and diabetes were prognostic factors. Residents of the northernmost county (Finnmark) experienced an inferior prognosis. Long distance from residence location to hospital may be another factor, but this could not be documented. Preventive strategies should be improved.

  7. 'No more strangers': Investigating the experiences of women, midwives and others during the establishment of a new model of maternity care for remote dwelling aboriginal women in northern Australia.

    Science.gov (United States)

    Josif, Cathryn M; Barclay, Lesley; Kruske, Sue; Kildea, Sue

    2014-03-01

    to describe the experiences of women, midwives and others during the establishment of a new model of maternity care for remote dwelling Aboriginal women transferred to a regional centre in northern Australia for maternity care and birth. a mixed method design within a Participatory Action Research approach was used. Qualitative findings are presented here. Data for this paper were collected from semi-structured interviews, field notes and observations and analysed thematically. the 'top end' of the Northern Territory of Australia. a total of 66 participants included six MGP midwives, two Aboriginal Health Workers and one Senior Aboriginal Woman working in the new model; eight hospital midwives; 34 Department of Health staff, three staff from other agencies; and 12 remote dwelling Aboriginal women who used the service. the study generated one overarching theme, it's not a perfect system but it's changing. This encompassed improvements to the services evident to all participants. Core themes related to the previous maternity service which was described as the arduous journey, the new model was seen as a new way of working and a resultant very different journey occurred for Aboriginal women using the service. there was a dissonance between the previous culture of maternity services and the woman centred focus of the new model. Over 12 months initial resistance to the new model diminished and it became highly valued. The transfer of information between the regional service and remote community health centres improved as did the safety and quality of care. Aboriginal women can access continuity of carer in the regional centre for the first time and reported a more positive experience with maternity services. The new model appears to have changed the cultural responsiveness of the regional maternity service; and care provided for remote dwelling women within this service. The qualitative findings inform others seeking to implement a similar model of care for remote

  8. CENTRE FOR GEOMETRICAL METROLOGY

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    The objective of this Annual Report is to give a general introduction to CGM as well as to give an account of the tasks carried out using the facilities of CGM's Instrument Centre during 1998 and 1999.......The objective of this Annual Report is to give a general introduction to CGM as well as to give an account of the tasks carried out using the facilities of CGM's Instrument Centre during 1998 and 1999....

  9. Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia

    International Nuclear Information System (INIS)

    Lisovsky, I.; Baklanov, A.; Jacovlev, V.; Prutskov, V.; Bergman, R.

    1999-05-01

    This Technical Report, being part of the INTAS project 96-1802, constitutes a comprehensive presentation - covering basic results from separate contributions as specified below - of work performed during the first period (February 1998- February 1999). The aim of the INTAS project 96-1802: 'Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia' is to assess the potential risk of environmental radioactive contamination from nuclear units in north-west Russia and resulting impacts on population and terrestrial ecosystems in the north. The work focuses mainly on airborne radioactive contamination, but some case studies also deal with accidental leakage from terrestrial nuclear sites to soil and coastal waters. The present material comprises in more detail the contributions from participants no.4 and no.5 based on the four internal reports referred to below: (1) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in north-west Russia: 'Determination of the list of typical sources of danger emergency radioactive releases in an environment in connection with military activity in the North of Russia.' Technical report no.1 of the team no.5. St.-Petersburg State Technical University, St.-Petersburg. July 1998. 43 p.; (2) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in North-west Russia: 'Analysis and description of source-term characteristics for accident linked with airborne radioactive releases from Kola Nuclear Power Plant. Establishing a network facility at INEP for communication among the INTAS Project participants.' Technical report no.1 of the team no.4. Kola Science Centre, Apatity. August 1998. 56 p.; (3) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in

  10. Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia

    Energy Technology Data Exchange (ETDEWEB)

    Lisovsky, I. [St. Petersburg State Technical Univ. (Russian Federation); Baklanov, A. [Inst. of the Northern Ecology Problems (INEP) (Russian Federation); Jacovlev, V. [St. Petersburg State Technical Univ. (Russian Federation); Prutskov, V. [Ministry of Defence (Russian Federation). First Central Research Inst. of Naval Shipbuilding; Tarasov, I. [Ministry of Defence (Russian Federation). 23 State Marine Project Inst.; Blecher, A. [State Unitary Enterprise (Russian Federation). Research Inst. of Industrial and Marine Medicine; Zvonariev, B.; Kuchin, N.; Rubanov, S.; Sergeiev, I. [State Scientific Centre (Russian Federation). Central Research Inst. of A. Krylov; Morozov, S.; Koshkin, V.; Fedorenko, Yu.; Rigina, O. [Inst. of the Northern Ecology Problems (INEP) (Russian Federation); Bergman, R. [ed.] [Defence Research Establishment, Umeaa (Sweden). Div. of NBC Defence

    1999-05-01

    This Technical Report, being part of the INTAS project 96-1802, constitutes a comprehensive presentation - covering basic results from separate contributions as specified below - of work performed during the first period (February 1998- February 1999). The aim of the INTAS project 96-1802: `Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia` is to assess the potential risk of environmental radioactive contamination from nuclear units in north-west Russia and resulting impacts on population and terrestrial ecosystems in the north. The work focuses mainly on airborne radioactive contamination, but some case studies also deal with accidental leakage from terrestrial nuclear sites to soil and coastal waters. The present material comprises in more detail the contributions from participants no.4 and no.5 based on the four internal reports referred to below: (1) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in north-west Russia: `Determination of the list of typical sources of danger emergency radioactive releases in an environment in connection with military activity in the North of Russia.` Technical report no.1 of the team no.5. St.-Petersburg State Technical University, St.-Petersburg. July 1998. 43 p.; (2) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in North-west Russia: `Analysis and description of source-term characteristics for accident linked with airborne radioactive releases from Kola Nuclear Power Plant. Establishing a network facility at INEP for communication among the INTAS Project participants.` Technical report no.1 of the team no.4. Kola Science Centre, Apatity. August 1998. 56 p.; (3) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in

  11. Proceedings of chemical engineering in nuclear technology - national seminar on recent advances in fuel cycle technologies: book of abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    Kalpakkam Regional Centre of Indian Institute of Chemical Engineers is embarking on conducting a series of national seminars on Chemical Engineering in Nuclear Technology 2014. For CHEMENT-2014 the theme was Seminar on recent advances in fuel cycle technologies. The topics covered included research and development, modeling and simulation and equipment development. Papers relevant to INIS are indexed separately

  12. The "magic" of tutorial centres in Hong Kong: An analysis of media marketing and pedagogy in a tutorial centre

    Science.gov (United States)

    Koh, Aaron

    2014-12-01

    Why do more than three-quarters of Hong Kong's senior secondary students flock to tutorial centres like moths to light? What is the "magic" that is driving the popularity of the tutorial centre enterprise? Indeed, looking at the ongoing boom of tutorial centres in Hong Kong (there are almost 1,000 of them), it is difficult not to ask these questions. This paper examines the phenomenon of tutorial centres in Hong Kong and seeks to understand what draws students to these centres. Combining theories of marketing semiotics and emotion studies, the author investigates the pivotal role of media marketing in generating the "magic" of tutorial centres, whose advertising strategy includes, for example, a display of billboard posters featuring stylishly-dressed "celebrity teachers". The author reviews some of the literature available on the subject of tutorial centres. In a case study approach, he then maps out the pedagogy he observed in an English tutorial class, seeking heuristic insights into the kind of teaching students in the study were looking for. He argues that part of the "magical" attraction of what are essentially "cram schools" is their formulaic pedagogy of teaching and reinforcing exam skills. Finally, the paper considers the social implications of the tutorial centre industry in terms of media marketing of education and unequal access to tutorial services.

  13. Norway's centres for environment-friendly energy research (CEERs)

    Energy Technology Data Exchange (ETDEWEB)

    2009-07-01

    In February 2009 Norway's Minister of Petroleum and Energy announced the establishment of eight new Centres for Environment-friendly Energy Research (CEERs). The centres form national teams within the areas of offshore wind energy, solar energy, energy efficiency, bio energy, energy planning and design, and carbon capture and storage. These centres are: BIGCCS Centre - International CCS Research Centre; Centre for Environmental Design of Renewable Energy (CEDREN); Bioenergy Innovation Centre (CenBio); Norwegian Centre for Offshore Wind Energy (NORCOW E); Norwegian Research Centre for Offshore Wind Technology (NOWITECH); The Norwegian Research Centre for Solar Cell Technology; SUbsurface CO{sub 2} storage - Critical Elements and Superior Strategy (SUCCESS) The Research Centre on Zero Emission Buildings - ZEB (AG)

  14. Introducing the PET Centre Prague

    International Nuclear Information System (INIS)

    Belohlavek, O.

    2001-01-01

    The PET Centre Prague (www.homolka.cz/nm) was established in 1999 as the outcome of a joint project of the public Na Homolce Hospital and the Nuclear Research Institute Rez, plc, the Czech radiopharmaceutical producer. Technical and financial assistance was provided by the International Atomic Energy Agency, which perceived the Centre as its model project that could serve as a guide for the development of PET centres in countries sharing a comparable level of development with the Czech Republic. The article maps the history of the project, its design, workplace lay-out and equipment, radiation protection arrangements and spectrum of the first approx. 3000 investigations. (author)

  15. Logistics centres development in Latvia

    Directory of Open Access Journals (Sweden)

    I. Kabashkin

    2007-12-01

    Full Text Available In the situation where a large increase in trade and freight transport volumes in the Baltic Sea region (BSR is expected and in which the BSR is facing a major economic restructuring, eff orts to achieve more integrated and sustainable transport and communication links within the BSR are needed. One of these eff orts is the development of logistics centres (LCs and their networking, which will continue to have an impact on improving communication links, spatial planning practices and approaches, logistics chain development and the promotion of sustainable transport modes. These factors will refl ect on logistics processes both in major gateway cities and in remote BSR areas. The importance of logistics systems as a whole is not seen clearly enough. Logistics actors see that logistics operations are not appreciated as much as other fi elds of activity. In addition, logistics centres and the importance of logistics activities to the business life of areas and the employment rate should be brought up better. In the paper main goal and tasks of national approach to LCs development are discussed. Strategic focus of new activities in this area is on the integration of various networks within and between logistics centres in order to improve and develop the quality of logistics networks as well as to spatially widen the networking activities. The key objectives are to integrate the links between logistics centres, ports and other logistics operators in a functional and sustainable way, to promote spatial integration by creating sustainable and integrated approaches to spatial planning of logistics centres and transport infrastructure, to improve ICT-based networking and communication practices of the fi elds of transport and logistics and to increase the competence of logistics centres and associated actors by organising educational and training events. The current activities include, for example, the creation of measures for transport networking and

  16. Trends in Data Centre Energy Consumption under the European Code of Conduct for Data Centre Energy Efficiency

    Directory of Open Access Journals (Sweden)

    Maria Avgerinou

    2017-09-01

    Full Text Available Climate change is recognised as one of the key challenges humankind is facing. The Information and Communication Technology (ICT sector including data centres generates up to 2% of the global CO2 emissions, a number on par to the aviation sector contribution, and data centres are estimated to have the fastest growing carbon footprint from across the whole ICT sector, mainly due to technological advances such as the cloud computing and the rapid growth of the use of Internet services. There are no recent estimations of the total energy consumption of the European data centre and of their energy efficiency. The aim of this paper is to evaluate, analyse and present the current trends in energy consumption and efficiency in data centres in the European Union using the data submitted by companies participating in the European Code of Conduct for Data Centre Energy Efficiency programme, a voluntary initiative created in 2008 in response to the increasing energy consumption in data centres and the need to reduce the related environmental, economic and energy supply security impacts. The analysis shows that the average Power Usage Effectiveness (PUE of the facilities participating in the programme is declining year after year. This confirms that voluntary approaches could be effective in addressing climate and energy issue.

  17. Global warming considerations in northern Boreal forest ecosystems

    International Nuclear Information System (INIS)

    Slaughter, C.W.

    1993-01-01

    The northern boreal forests of circumpolar lands are of special significance to questions of global climate change. Throughout its range, these forests are characterized by a relatively few tree species, although they may exhibit great spatial heterogeneity. Their ecosystems are simpler than temperate systems, and ecosystem processes are strongly affected by interactions between water, the landscape, and the biota. Northern boreal forest vegetation patterns are strongly influenced by forest fires, and distribution of forest generally coincides with occurrence of permafrost. Boreal forest landscapes are extremely sensitive to thermal disruption; global warming may result in lasting thermal and physical degradation of soils, altered rates and patterns of vegetation succession, and damage to engineered structures. A change in fire severity and frequency is also a significant concern. The total carbon pool of boreal forests and their associated peatlands is significant on a global scale; this carbon may amount to 10-20% of the global carbon pool. A change in latitudinal or elevational treeline has been suggested as a probable consequence of global warming. More subtle aspects of boreal forest ecosystems which may be affected by global warming include the depth of the active soil layer, the hydrologic cycle, and biological attributes of boreal stream systems. 48 refs., 2 figs

  18. Colour centres in germanosilicate glass and optical fibres

    International Nuclear Information System (INIS)

    Neustruev, V.B.

    1994-01-01

    This review presents the state of the art of the study of germanium-related colour centres in silica glass and silica-based fibres. Most attention is concentrated on the dominant colour centres such as the Ge-related oxygen-deficient centres and paramagnetic Ge(n) centres, all of them having ultraviolet absorption bands. The hypothetical models and formation mechanisms proposed so far for these colour centres are discussed in detail. The origins of the models and formation mechanisms and their weak and strong points are analysed. The origin of the less well studied Ge-related colour centres in the visible spectral range (GeH, GeX, drawing-dependent defects) is also discussed. (author)

  19. Strategies for the Cooperation of Educational Institutions and Companies in Mechanical Engineering

    Science.gov (United States)

    Kettunen, Juha

    2006-01-01

    Purpose: The purpose of this study is to analyse the strategic planning of the Centre for Mechanical Engineering, which is a joint venture of educational institutions and companies in Southwest Finland. Design/methodology/approach: The paper presents the strategies of focus and cost efficiency and how the selected strategies can be adjusted…

  20. HISTORIC CENTRE(S OF BARCELONA: PRACTICAL AND SYMBOLIC ELEMENTS IN TRADITIONAL URBAN SPACE

    Directory of Open Access Journals (Sweden)

    Verónica Martínez Robles

    2007-09-01

    The model of compact city that Barcelona aims, has required the renewal of its historical areas, and in order to improve their level of centrality, taking into account, that in addition of its historical centre “Ciutat Vella”, Barcelona contains diverse traditional neighborhoods each of them having their own historical centre. The difference centre‐periphery should also be perceived among these other historical centers. Integration should not be confused with standardization, neither differentiation with segregation.

  1. Person-centred healthcare research: a personal influence

    Directory of Open Access Journals (Sweden)

    * Corresponding author: University of Windesheim, Zwolle, The Netherlands Email: am.vandenberg@windesheim.nl Submitted for publication: 3rd November 2017 Accepted for publication: 12th March 2018 Published: 16th May 2018 https://doi.org/10.19043/ipdj.81.011 Abstract Context: This critical reflection is about the positive effects for educational and research settings of participation in a two-day programme entitled ‘Using participatory action research and appreciative inquiry to research healthcare practice’. Aims: To reflect on the journey of positive developments in research and education that started with participation in this programme. Using Caring Conversations (Dewar, 2011 as a reflective framework of questions, this article discusses the journey in order to encourage others to consider the approach of appreciative inquiry to bring to life the concept of co-creation in research and education. Conclusions and implications for practice: Participation in this programme has led to the implementation of a variety of actions in educational and research settings. Central to all these actions is an appreciative approach to co-creation as a counterpart to today’s prevailing problem-based viewpoint. A possible factor behind these developments was the power of vulnerability experienced during the programme, a shared process of transformational learning. Implications for practice: This critical reflection: Provides an invitation to shift from a problem-based focus to a positive revolution Provides an appreciative reflective story about the power of vulnerability as an inspiration for others to move out of their comfort zone and seek to discover their own exceptionality Supports a shift from a facilitator-led to a co-creation approach in doing research and teaching with older adults Keywords: Emotional touchpoints, appreciative inquiry, Caring Conversations, practice development, co-creation, transformational learning theory   IDEAS AND INFLUENCES Person-centred healthcare research: a personal influence Hazel M. Chapman

    2018-05-01

    Full Text Available This commentary assesses the contribution made by the person-centred healthcare research of McCormack et al (2017 to research methodology and our ability to evaluate an organisation’s claims to be person-centred. It discusses the importance of person-centred ethical approaches within rigorous research methodologies.

  2. Creating Learning Environment Connecting Engineering Design and 3D Printing

    Science.gov (United States)

    Pikkarainen, Ari; Salminen, Antti; Piili, Heidi

    Engineering education in modern days require continuous development in didactics, pedagogics and used practical methods. 3D printing provides excellent opportunity to connect different engineering areas into practice and produce learning by doing applications. The 3D-printing technology used in this study is FDM (Fused deposition modeling). FDM is the most used 3D-printing technology by commercial numbers at the moment and the qualities of the technology makes it popular especially in academic environments. For achieving the best result possible, students will incorporate the principles of DFAM (Design for additive manufacturing) into their engineering design studies together with 3D printing. This paper presents a plan for creating learning environment for mechanical engineering students combining the aspects of engineering design, 3D-CAD learning and AM (additive manufacturing). As a result, process charts for carrying out the 3D printing process from technological point of view and design process for AM from engineering design point of view were created. These charts are used in engineering design education. The learning environment is developed to work also as a platform for Bachelor theses, work-training environment for students, prototyping service centre for cooperation partners and source of information for mechanical engineering education in Lapland University of Applied Sciences.

  3. The CCCB is a cultural centre, not a tourist centre

    Directory of Open Access Journals (Sweden)

    Elena Xirau

    2004-04-01

    Full Text Available Last February, Barcelona's Centre of Contemporary Culture (CCCB celebrated its first ten years in existence. During this time, this institution has looked to be a showcase to the most modern and innovative cultural expressions focused on reflecting on the concept of the city. In this interview, Josep Ramoneda offers his personal view, as the CCCB's director. He talks of how this cultural project was born, of how the concept of the institution took shape in the CCCB, of its relations with Barcelona's Strategic Plan, of how the project has evolved, of the architectural remodelling of the Casa de la Caritat building for its conversion into a cultural centre, of the relations with other institutions and its future.

  4. Presentation of TVO's visitor's centre

    International Nuclear Information System (INIS)

    Aemmaelae, V.M.

    1993-01-01

    There are four nuclear power plant units in Finland, two of which are PWR's owned by Imatran Voima Oy. The two BWR units are located at Olkiluoto and owned by Teollisuuden Voima Oy. This presentation tells about TVO's concept of informing the visitors at Olkiluoto. At the site there are located, in addition to the two nuclear power plant units, the intermediate storage for spent fuel, the repository for low and medium-active waste as well as the training centre. At the Olkiluoto Visitor's Centre all the activities of the company are presented using varied audio-visual aids. The centre has several exhibits and there are also different installations to show how the plant works. (author)

  5. Technical support and emergency centre

    International Nuclear Information System (INIS)

    Bohun, L.; Kapisovsk y, M.

    1997-01-01

    This paper presents technical support and emergency management center which will be on two places: Mochovce NPP Emergency Centre (Technical support center and Support working center) and Reserve Emergency Centre in Levice (Reserve emergency center and Environmental Evaluation Center). The main aims of the emergency management centers are: the management and coordination of all persons and organisations; provision of the all information needed to evaluation of the accident and its mitigation; continuous evaluation of the potential or real radiological consequences; taking measure for an early notification of the governmental bodies and the organizations, warning and protection of the public; and other aims. In the next part the data for technical support and emergency centre are discussed

  6. Patient-centred care: a review for rehabilitative audiologists.

    Science.gov (United States)

    Grenness, Caitlin; Hickson, Louise; Laplante-Lévesque, Ariane; Davidson, Bronwyn

    2014-02-01

    This discussion paper aims to synthesise the literature on patient-centred care from a range of health professions and to relate this to the field of rehabilitative audiology. Through review of the literature, this paper addresses five questions: What is patient-centred care? How is patient-centred care measured? What are the outcomes of patient-centred care? What are the factors contributing to patient-centred care? What are the implications for audiological rehabilitation? Literature review and synthesis. Publications were identified by structured searches in PubMed, Cinahl, Web of Knowledge, and PsychInfo, and by inspecting the reference lists of relevant articles. Few publications from within the audiology profession address this topic and consequently a review and synthesis of literature from other areas of health were used to answer the proposed questions. This paper concludes that patient-centred care is in line with the aims and scope of practice for audiological rehabilitation. However, there is emerging evidence that we still need to inform the conceptualisation of patient-centred audiological rehabilitation. A definition of patient-centred audiological rehabilitation is needed to facilitate studies into the nature and outcomes of it in audiological rehabilitation practice.

  7. Geology of Kubi Algi and Derati mountains, pantellerite bodies of Miocene age from the northern part of the Kenyan Rift Valley

    Science.gov (United States)

    Watkins, R. T.

    The small isolated peaks of Kubi Algi and Derati on the periphery of the Koobi Fora basin, to the north-east of Lake Turkana in northern Kenya, are remnants of silicic peralkaline volcanic centres. Detailed geological maps of the areas of the two mountains are presented. Both are massive bodies of generally aphyric, microgranular pantellerite sharing similar petrography and chemistry. Kubi Algi shows evidence of having formed as an extrusive dome and is considered the source of local pantellerite lava flows, here designated the Il Burrka Formation. Derati mountain can best be interpreted as a denuded plug of a second extrusive centre. The volcanoes were active in the middle Miocene towards the end of a period of regional magmatism extending from late-Oligocene times. The pantellerites are holocrystalline and thus contrast with the normally glassy over-saturated peralkaline rocks from the East African rifts, including older pyroclastic pantellerites of the northern Lake Turkana region. Despite being very finely crystalline, they show mineralogical features seen elsewhere in more slowly cooled, deep-seated, peralkaline granites. A very broad range of feldspar compositions present in the rocks is explained by the interaction of groundwater with the rapidly cooling magma. Of additional interest is the abundance of aegirine, present as a product of primary magmatic crystallization and, in the Derati rock, as a hydrothermal mineral. It contains significant but highly variable amounts of titanium and zirconium, the latter broadly equivalent to typical maximum concentrations reported from peralkaline intrusive complexes.

  8. The Aube centre. 1997 statement

    International Nuclear Information System (INIS)

    1998-09-01

    Since January 1992 the Aube centre ensures the storage of 90% of the short life radioactive wastes produced in France. This educational booklet describes the organization of the activities in the centre from the storage of wastes to the radioactivity surveillance of the environment (air, surface and ground waters, river sediments, plants and milk). (J.S.)

  9. Review of CERN Data Centre Infrastructure

    International Nuclear Information System (INIS)

    Andrade, P; Bell, T; Van Eldik, J; McCance, G; Panzer-Steindel, B; Coelho dos Santos, M; Traylen and, S; Schwickerath, U

    2012-01-01

    The CERN Data Centre is reviewing strategies for optimizing the use of the existing infrastructure and expanding to a new data centre by studying how other large sites are being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote data centres. This paper gives the details on the project's motivations, current status and areas for future investigation.

  10. Review of CERN Data Centre Infrastructure

    CERN Document Server

    Andrade, P; van Eldik, J; McCance, G; Panzer-Steindel, B; Coelho dos Santos, M; Traylen, S; Schwickerath, U

    2012-01-01

    The CERN Data Centre is reviewing strategies for optimizing the use of the existing infrastructure and expanding to a new data centre by studying how other large sites are being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote data centres. This paper gives the details on the project’s motivations, current status and areas for future investigation.

  11. Comparison of planned menus and centre characteristics with foods and beverages served in New York City child-care centres.

    Science.gov (United States)

    Breck, Andrew; Dixon, L Beth; Kettel Khan, Laura

    2016-10-01

    The present study evaluated the extent to which child-care centre menus prepared in advance correspond with food and beverage items served to children. The authors identified centre and staff characteristics that were associated with matches between menus and what was served. Menus were collected from ninety-five centres in New York City (NYC). Direct observation of foods and beverages served to children were conducted during 524 meal and snack times at these centres between April and June 2010, as part of a larger study designed to determine compliance of child-care centres with city health department regulations for nutrition. Child-care centres were located in low-income neighbourhoods in NYC. Overall, 87 % of the foods and beverages listed on the menus or allowed as substitutions were served. Menu items matched with foods and beverages served for all major food groups by >60 %. Sweets and water had lower match percentages (40 and 32 %, respectively), but water was served 68 % of the time when it was not listed on the menu. The staff person making the food and purchasing decisions predicted the match between the planned or substituted items on the menus and the foods and beverages served. In the present study, child-care centre menus included most foods and beverages served to children. Menus planned in advance have potential to be used to inform parents about which child-care centre to send their child or what foods and beverages their enrolled children will be offered throughout the day.

  12. Comparison of planned menus and centre characteristics with foods and beverages served in New York City child-care centres

    Science.gov (United States)

    Breck, Andrew; Dixon, L Beth; Khan, Laura Kettel

    2016-01-01

    Objective The present study evaluated the extent to which child-care centre menus prepared in advance correspond with food and beverage items served to children. The authors identified centre and staff characteristics that were associated with matches between menus and what was served. Design Menus were collected from ninety-five centres in New York City (NYC). Direct observation of foods and beverages served to children were conducted during 524 meal and snack times at these centres between April and June 2010, as part of a larger study designed to determine compliance of child-care centres with city health department regulations for nutrition. Setting Child-care centres were located in low-income neighbourhoods in NYC. Results Overall, 87% of the foods and beverages listed on the menus or allowed as substitutions were served. Menu items matched with foods and beverages served for all major food groups by > 60%. Sweets and water had lower match percentages (40 and 32%, respectively), but water was served 68% of the time when it was not listed on the menu. The staff person making the food and purchasing decisions predicted the match between the planned or substituted items on the menus and the foods and beverages served. Conclusions In the present study, child-care centre menus included most foods and beverages served to children. Menus planned in advance have potential to be used to inform parents about which child-care centre to send their child or what foods and beverages their enrolled children will be offered throughout the day. PMID:27280341

  13. On-line services offered by 'Fachinformationszentrum Chemie' to the chemical engineer

    International Nuclear Information System (INIS)

    Krietsch, W.

    1979-01-01

    An introduction to some basic concepts of computerized literature searches is followed by an account of the data stores at 'Fachinformationszentrum Chemie', insofar as they are of interest to chemical engineers. An example of a dialogue search is presented. Some data banks of affiliated organizations and other information centres are then presented. In conclusion current developments and especially EURONET are considered. (orig.) [de

  14. A reference regional nuclear fuel centre

    International Nuclear Information System (INIS)

    1978-01-01

    A nuclear fuel centre groups the facilities for spent fuel reprocessing, plutonium fuel fabrication, waste conditioning, and interim storage on a single site. The technical aspects of safety and protection, and the socio-economic consequences of two types of centre have been studied. The reference centre has an initial reprocessing capacity of 1500 tonnes. This capacity is quadrupled by the construction of two new units in 15 years. The other centre considered is a quarter of this size. A description is given of the processes used, the personal and capital requirements for construction and operation of the plant, the transport of radioactive waste and products, and the quantities involved. The local radiological impact is low and could be further reduced to a level well below that of natural radioactivity. The resulting increase in economic activity, employment, income redistribution and the new infrastructure requirements are estimated for a rural or semi-rural region. Measures to prevent tension are proposed. The impact of the host country's balance of payments, finances, employment situation and technological knowhow is evaluated. The original centre is compared with equivalent facilities scattered geographically

  15. The Aube storage centre: Annual report 2010

    International Nuclear Information System (INIS)

    2011-01-01

    After a presentation of the Aube storage centre, a storage centre for low and intermediate activity nuclear wastes, this report gives an overview of measures related to nuclear security, to radioprotection and to nuclear safety. It indicates the incidents and accidents which occurred in 2010, describes how the centre's wastes are managed, and indicates the actions performed in terms of public information

  16. Costs, benefits and management options for an invasive alien tree species: the case of mesquite in the Northern Cape, South Africa

    CSIR Research Space (South Africa)

    Wise, RM

    2012-08-01

    Full Text Available and management options for an invasive alien tree species: The case of mesquite in the Northern Cape, South Africa R.M. Wise1?, B.W. van Wilgen2 and D.C. Le Maitre2 1 CSIRO Ecosystem Sciences, GPO Box 284, Canberra, ACT 2601, Australia . 2 Centre for Invasion... determined the net economic impact of mesquite in arid parts of South Africa today and for a range of plausible future scenarios, and identified the pivotal factors driving these outcomes. Our assessment was based on a thorough review of the beneficial...

  17. Mixed municipal solid waste (MSW) treatment in Waste centre Spodnji Stari Grad, Krško

    OpenAIRE

    Kortnik, Jože; Leskovar, Jože

    2015-01-01

    Review paper Received: October 25, 2013 Accepted: November 7, 2013 Mixed municipal solid waste (MSW) treatment in Waste centre Spodnji Stari Grad, Krško Ravnanje z mešanimi komunalnimi odpadki v Zbirnem centru Spodnji Stari Grad, Krško Jože Kortnik1'*, Jože Leskovar2 University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Mining and Geotechnology, Aškerčeva 12, 1000 Ljubljana, Slovenia 2Kostak, d. d., Leskovška cesta 2a, 8270 Krško, Slovenia Correspo...

  18. Conceptual Framework for Educational Disaster Centre "save the Children Life"

    Science.gov (United States)

    Bandrova, T.; Kouteva, M.; Pashova, L.; Savova, D.; Marinova, S.

    2015-08-01

    Millions of people are affected by natural and man-made disasters each year, among which women, children, elderly persons, people with disabilities or special needs, prisoners, certain members of ethnic minorities, people with language barriers, and the impoverished are the most vulnerable population groups in case of emergencies. Many national and international organizations are involved in Early Warning and Crisis Management training, particularly focused on the special target to safe children and improve their knowledge about disasters. The success of these efforts is based on providing the specific information about disaster preparedness and emergency in adapted for children educational materials, accompanied with simple illustrative explanations for easy and fast understanding of the disasters. The active participation of the children in the educational activities through appropriate presenting the information, short training seminars and entertaining games will increase their resilience and will contribute significantly to their preparedness and adequate response in emergency situations. This paper aims to present the conceptual framework of a project for establishing an Educational Disaster Centre (EDC) "Save the children life" at University of Architecture, Civil Engineering and Geodesy (UACEG), providing relevant justification of the necessity to organize such centre in Bulgaria and discussing good practices in Europe and worldwide for children' education and training in case of disastrous event. General concepts for educational materials and children training are shared. Appropriate equipment for the EDC is shortly described.

  19. Leveraging management information in improving call centre productivity

    Directory of Open Access Journals (Sweden)

    Manthisana Mosese

    2016-04-01

    Objectives: This research explored the use of management information and its impact on two fundamental functions namely, improving productivity without compromising the quality of service, in the call centre of a well-known South African fashion retailer, Edcon. Following the implementation of the call centre technology project the research set out to determine how Edcon can transform their call centre to improve productivity and customer service through effective utilisation of their management information. Method: Internal documents and reports were analysed to provide the basis of evaluation between the measures of productivity prior to and post the implementation of a technology project at Edcon’s call centre. Semi-structured in-depth and group interviews were conducted to establish the importance and use of management information in improving productivity and customer service. Results: The results indicated that the availability of management information has indeed contributed to improved efficiency at the Edcon call centre. Although literature claims that there is a correlation between a call centre technology upgrade and improvement in performance, evident in the return on investment being realised within a year or two of implementation, it fell beyond the scope of this study to investigate the return on investment for Edcon’s call centre. Conclusion: Although Edcon has begun realising benefits in improved productivity in their call centre from their available management information, information will continue to play a crucial role in supporting management with informed decisions that will improve the call centre operations. [pdf to follow

  20. Environmental aspects of engineering geological mapping in the United States

    Science.gov (United States)

    Radbruch-Hall, Dorothy H.

    1979-01-01

    Many engineering geological maps at different scales have been prepared for various engineering and environmental purposes in regions of diverse geological conditions in the United States. They include maps of individual geological hazards and maps showing the effect of land development on the environment. An approach to assessing the environmental impact of land development that is used increasingly in the United States is the study of a single area by scientists from several disciplines, including geology. A study of this type has been made for the National Petroleum Reserve in northern Alaska. In the San Francisco Bay area, a technique has been worked out for evaluating the cost of different types of construction and land development in terms of the cost of a number of kinds of earth science factors. ?? 1979 International Association of Engineering Geology.

  1. Centre for Building Simulation. Basis for establishing a centre; Center for Bygningssimulering - Idegrundlag for etablering af center

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Joergen Erik; Karlshoej, J.; Bacher, P.; Johnsen, K.; Olesen, B.W.; Rode, C.; Heller, A.

    2012-12-15

    The purpose of the project was to create the basis for the establishment of a Centre for Building Simulation focusing on the use of advanced building energy simulations to obtain electricity and heat savings. The project of trying to make a Centre for Building Simulation in Denmark was based on interviews with future users and partners with an interest in further development of Denmark's leading position in this field. Friday 29th October, 2010, a ''Workshop on the establishment of the Centre for Building Simulation'' was organized at DTU. Approximately 90 national and international participants were present. The workshop structure and results are described in enclosure 1. The primary purpose of the workshop was to establish consensus on the needs of architects and consultants in Denmark in relation to building simulation, and create the concept for a Danish Centre for Building Simulation. As a result of the workshop the idea grew that the centre will combine research and development activities of the Danish building simulation and develops future intelligent simulation tools with a focus on the use of advanced building energy simulations to achieve sustainable construction. These programs need to interact closely with Building Information Modelling, BIM, where the construction process is connected to a digital building model. In addition, various financing options were considered for the operation of the centre with an initial time horizon of 5-10 years. Based on results from the workshop, interviews with future users and partners, a large application was written to the Danish National Research Council, 7th application round - Centre of Excellence, 29 November 2011 (enclosure 3) entitled ''Centre for Intelligent Building Information Modelling iBIM''. The work on the application resulted in a great deal of knowledge gathered and adapted during the whole process of preparing the application. Unfortunately, the application

  2. EVALUATION OF ENVIRONMENTAL EDUCATION CENTRES- A ...

    African Journals Online (AJOL)

    centres in South Africa revealed that some field .... psychomotor goals suitable for each age group? * Did the officer have a proper ..... education centres, spending two to four weeks at a ... you must be willing to suspend judgement, to hold in ...

  3. Regional differences in renal replacement therapy in northern Norway 2000–2012

    Science.gov (United States)

    Norum, Jan; Leivestad, Torbjørn; Eriksen, Bjørn Odvar; Skår, Siw; Fagerheim, Anne; Reisæter, Anna Varberg

    2015-01-01

    Objective Distance from residence location to a centre for renal replacement therapy (RRT) may influence patients’ quality of life and prognosis. Northern Norway constitutes 45% of Norway's landmass, but has less than 10% of the population. Methods In this study, we analysed all patients in northern Norway consecutively registered in the Norwegian Renal Registry during 2000–2012. A total of 634 patients (Nordland County 321 patients, Troms County 215 patients and Finnmark County 98 patients) were investigated. Results There were more smokers (31% vs. 22%) and patients with diabetes (32% vs. 22%) in Finnmark, but the difference did not reach statistical significance. Patients undergoing RRT and living in Finnmark County had a significantly worse outcome (P=0.03). The median survivals after initiation of RRT were 3.8 years (Finnmark), 6.4 years (Troms) and 5.4 years (Nordland), respectively. The most common causes of death were cardiovascular disease (53%), infections (16%), withdrawal from therapy (15%) and malignancy (13%). In a Cox analysis, age (P<0.0001), diabetes (P=0.008) and smoking at any time (P<0.004) were individual factors correlated with inferior prognosis. Conclusion Age, smoking and diabetes were prognostic factors. Residents of the northernmost county (Finnmark) experienced an inferior prognosis. Long distance from residence location to hospital may be another factor, but this could not be documented. Preventive strategies should be improved. PMID:25672881

  4. Technip juggles with its 25 engineering centers; Technip jongle avec ses 25 centres d'ingenierie

    Energy Technology Data Exchange (ETDEWEB)

    Jemain, A.

    2005-02-01

    Technip company is one of the 5 world leaders of petroleum and petrochemical engineering. It comprises 25 engineering centers distributed in 23 countries. This unique organizing system allows Technip to answer practically all petroleum and petrochemical bids launched anywhere in the wold. The realization of contracts and the respect of respites is based on the combination of an extreme centralization for the control of costs and planning and a deep decentralization through 11 regional business units for the collection, negotiation, and realization of contracts. (J.S.)

  5. Formaldehyde in the Galactic Centre

    International Nuclear Information System (INIS)

    Cohen, R.J.; Few, R.W.

    1981-01-01

    Formaldehyde 6-cm absorption in the direction of the Galactic Centre has been surveyed using the Jodrell Bank MK II radio telescope (beam-width 10 x 9 arcmin). The observations sample the region - 2 0 = 0 and - 0 0 .5 = 0 .5, with a velocity range of 620 km s -1 , a velocity resolution of 2.1 km s -1 and an rms noise level of approximately 0.03 K. The data are presented as contour maps showing line temperature as a function of latitude and velocity (b-V maps) and as a function of longitude and velocity (l-V maps). Similar maps of the line-to-continuum ratio are also presented. The radial distribution of formaldehyde (H 2 CO) in the Galactic Centre region is derived using two different kinematic models which give similar results. Formaldehyde is strongly concentrated in the Galactic Centre in a layer of latitude extent approximately 0 0 .5 and longitude extent approximately 4 0 which contains one quarter of all the H 2 CO in the Galaxy. The distribution is centred on l approximately 1 0 . The individual H 2 CO features are described in detail. (author)

  6. Trophic ecology of largemouth bass and northern pike in allopatric and sympatric assemblages in northern boreal lakes

    Science.gov (United States)

    Soupir, Craig A.; Brown, Michael L.; Kallemeyn, Larry W.

    2000-01-01

    Largemouth bass (Micropterus salmoides) and northern pike (Esox lucius) are top predators in the food chain in most aquatic environments that they occupy; however, limited information exists on species interactions in the northern reaches of largemouth bass distribution. We investigated the seasonal food habits of allopatric and sympatric assemblages of largemouth bass and northern pike in six interior lakes within Voyageurs National Park, Minnesota. Percentages of empty stomachs were variable for largemouth bass (38-54%) and northern pike (34.7-66.7%). Fishes (mainly yellow perch, Perca flavescens) comprised greater than 60% (mean percent mass, MPM) of the northern pike diet during all seasons in both allopatric and sympatric assemblages. Aquatic insects (primarily Odonata and Hemiptera) were important in the diets of largemouth bass in all communities (0.0-79.7 MPM). Although largemouth bass were observed in the diet of northern pike, largemouth bass apparently did not prey on northern pike. Seasonal differences were observed in the proportion of aquatic insects (P = 0.010) and fishes (P = 0.023) in the diets of northern pike and largemouth bass. Based on three food categories, jackknifed classifications correctly classified 77 and 92% of northern pike and largemouth bass values, respectively. Percent resource overlap values were biologically significant (greater than 60%) during at least one season in each sympatric assemblage, suggesting some diet overlap.

  7. Regional Centres for Space Science and Technology Education and ICG Information Centres affiliated to the United Nations

    Science.gov (United States)

    Gadimova, S.; Haubold, H. J.

    2009-06-01

    Based on resolutions of the United Nations General Assembly, Regional Centres for Space Science and Technology Education were established in India, Morocco, Nigeria, Brazil and Mexico. Simultaneously, education curricula were developed for the core disciplines of remote sensing, satellite communications, satellite meteorology, and space and atmospheric science. This paper provides a brief summary on the status of the operation of the regional centres with a view to use them as information centres of the International Committee on Global Navigation Satellite Systems (ICG), and draws attention to their educational activities.

  8. The Structural Integrity Centre

    International Nuclear Information System (INIS)

    Tomkins, B.

    1987-01-01

    The paper concerns the development and work of the Structural Integrity Centre (SIC) at Risley Nuclear Laboratories, United Kingdom. The centre was set up to provide authoritative advice to plant designers and operators on the integrity and life assessment of structures and components across the reactor projects in the United Kingdom. A description is given of the structure and role of the SIC, as well as the Structural Integrity Assessment work. The assessment methods are described for thermally loaded structures and welded structures. Finally, defect significance assessment and environmental effects are outlined. (U.K.)

  9. How European centres diagnose, treat, and prevent CIED infections

    DEFF Research Database (Denmark)

    Bongiorni, Maria Grazia; Marinskis, Germanas; Lip, Gregory Y H

    2012-01-01

    in most centres and is substantially under 2% in the majority of centres interviewed. However, there are still differences in terms of prophylactic antibiotic therapy: 8.9% of the centres administer oxacillin as preoperative treatment, 4.4% of them do not give any antibiotic therapy, all centres use some...

  10. Ecosystem engineering varies spatially: a test of the vegetation modification paradigm for prairie dogs

    Science.gov (United States)

    Baker, Bruce W.; Augustine, David J.; Sedgwick, James A.; Lubow, Bruce C.

    2013-01-01

    Colonial, burrowing herbivores can be engineers of grassland and shrubland ecosystems worldwide. Spatial variation in landscapes suggests caution when extrapolating single-place studies of single species, but lack of data and the need to generalize often leads to ‘model system’ thinking and application of results beyond appropriate statistical inference. Generalizations about the engineering effects of prairie dogs (Cynomys sp.) developed largely from intensive study at a single complex of black-tailed prairie dogs C. ludovicianus in northern mixed prairie, but have been extrapolated to other ecoregions and prairie dog species in North America, and other colonial, burrowing herbivores. We tested the paradigm that prairie dogs decrease vegetation volume and the cover of grasses and tall shrubs, and increase bare ground and forb cover. We sampled vegetation on and off 279 colonies at 13 complexes of 3 prairie dog species widely distributed across 5 ecoregions in North America. The paradigm was generally supported at 7 black-tailed prairie dog complexes in northern mixed prairie, where vegetation volume, grass cover, and tall shrub cover were lower, and bare ground and forb cover were higher, on colonies than at paired off-colony sites. Outside the northern mixed prairie, all 3 prairie dog species consistently reduced vegetation volume, but their effects on cover of plant functional groups varied with prairie dog species and the grazing tolerance of dominant perennial grasses. White-tailed prairie dogs C. leucurus in sagebrush steppe did not reduce shrub cover, whereas black-tailed prairie dogs suppressed shrub cover at all complexes with tall shrubs in the surrounding habitat matrix. Black-tailed prairie dogs in shortgrass steppe and Gunnison's prairie dogs C. gunnisoni in Colorado Plateau grassland both had relatively minor effects on grass cover, which may reflect the dominance of grazing-tolerant shortgrasses at both complexes. Variation in modification of

  11. Scavenger hunt in the CERN Computing Centre

    CERN Multimedia

    CERN Bulletin

    2013-01-01

    Hidden among the racks of servers and disks in the CERN Computing Centre, you’ll find Hawaiian dancers, space aliens, gorillas… all LEGO® figurines! These characters were placed about the Centre for the arrival of Google’s Street View team for the world to discover.   PLEASE NOTE THAT THE COMPETITION IS OVER. ONLY FOR REFERENCE, HERE IS THE ORIGINAL ARTICLE. We’re pleased to announce our first global scavenger hunt! Spot three LEGO® figurines using Google’s Street View and you’ll be entered to win a gift of your choice from our CERN Gift Guide. A LEGO® figurine in the CERN Computing Centre, as seen on Google Street View. Here are the details: Find at least three LEGO® figurines hidden around the CERN Computing Centre using Google Street View.   Take screencaps of the figurines and e-mail the pictures to TreasureHunt-ComputingCentre@cern.ch. This email is no longer active.   The...

  12. The role of the sexual assault centre.

    LENUS (Irish Health Repository)

    Eogan, Maeve

    2013-02-01

    Sexual Assault Centres provide multidisciplinary care for men and women who have experienced sexual crime. These centres enable provision of medical, forensic, psychological support and follow-up care, even if patients chose not to report the incident to the police service. Sexual Support Centres need to provide a ring-fenced, forensically clean environment. They need to be appropriately staffed and available 24 hours a day, 7 days a week to allow prompt provision of medical and supportive care and collection of forensic evidence. Sexual Assault Centres work best within the context of a core agreed model of care, which includes defined multi-agency guidelines and care pathways, close links with forensic science and police services, and designated and sustainable funding arrangements. Additionally, Sexual Assault Centres also participate in patient, staff and community education and risk reduction. Furthermore, they contribute to the development, evaluation and implementation of national strategies on domestic, sexual and gender-based violence.

  13. Propelling Ariane. The Vulcain engines and the solid propellant engines; Propulser Ariane. Les moteurs Vulcain et les moteurs a propergol solide

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1997-12-31

    The development of the Vulcain program was ensured thanks to a European cooperation with an ESA (European Space Agency) financing. The CNES (European Centre for Space Studies) has ensured the technical and financial direction of the program and gave the control of the development to the SEP. The manufacturing of the Vulcain engine is managed under the Arianespace contract, in charge of the marketing of the Ariane 5 launcher. The overall engineering of the engine and its tests were carried out by the SEP in Vernon (France) and Lampoldshausen (Germany) test facilities. SEP has also developed and built the hydrogen turbo-pump, the gas generator and its feeding valves. Several companies are involved in the development of this engine: DASA for the combustion chamber, Fiat Avio for the oxygen turbo-pump, Volvo Aero Corp. for the divergent and the hydrogen and oxygen turbines, Techspace Aero for the chamber injection valves and the drain and hot gases valves, Microtechnica for the electro-valves and check valves, SPE for the firing and start-up equipments, Avica for the feeding lines, Devtec for the supports, and MAN for the cardan and the thermal protection. This paper describes the functioning principle of the Vulcain engine, and of the two solid propellant fuel acceleration stages of the Ariane 5 launcher. Some future projects of the SEP are also described: the dual liquid-fuels engine and the plasma engine. (J.S.)

  14. Visitor centres at nuclear facility sites

    International Nuclear Information System (INIS)

    1993-01-01

    Communications strategies in the nuclear field are often based on the creation of visitor centres at nuclear facility sites. Today, the design, as well as the realization and management of such centres has become a specialized function, and its role is very complementary to the nuclear operator's. It also uses the latest technology in the field of audio-visual, experiment and interactivity. This publication contains the proceedings of an international seminar organized by the OECD Nuclear Energy Agency on the role of visitor centres at nuclear facility sites. It includes the main papers presented at this Seminar

  15. Student-Centred and Teacher-Centred Learning Environment in Pre-Vocational Secondary Education: Psychological Needs, and Motivation

    Science.gov (United States)

    Smit, Karin; de Brabander, Cornelis J.; Martens, Rob L.

    2014-01-01

    In this study the perception of psychological needs and motivation in a student-centred and a teacher-centred learning environment are compared, using Self Determination Theory as a framework. The self-report Intrinsic Motivation Inventory was completed by 230 students (mean age 16.1 years) in pre-vocational secondary education. School records on…

  16. The Recent Infection Testing Algorithm (RITA) in clinical practice: a survey of HIV clinicians in England and Northern Ireland.

    Science.gov (United States)

    Garrett, Nj; Lattimore, S; Gilbart, Vl; Aghaizu, A; Mensah, G; Tosswill, J; Murphy, G; Delpech, V

    2012-08-01

    In order to estimate HIV incidence among high-risk groups, in January 2009 the Health Protection Agency introduced the Recent Infection Testing Algorithm (RITA) in England and Northern Ireland (E&NI), currently the only regions to inform patients of RITA results. This survey of HIV specialists aimed to investigate the role of RITA in patient management and explore clinicians' views on its role in clinical practice and during partner notification. An online questionnaire was distributed to HIV specialists via the British HIV Association membership email list in February 2011. Forty-two HIV specialists from 32 HIV centres responded to the survey among 90 centres enrolled in the programme (response rate 36%). Testing for recent infection was considered standard of care by 83% of respondents, 80% felt confident in interpreting results and 92% discussed results with patients, particularly in the context of a possible HIV seroconversion illness (96%) or when deciding when to start antiretroviral therapy (70%). A third (36%) of specialists were initially concerned that RITA results may cause additional anxiety among patients; however, no adverse events were reported. The majority (90%) felt that results could assist with contact tracing by prioritizing patients with likely recent infection. However, only a few centres have currently incorporated RITA into their HIV partner notification protocols. RITA has been introduced into clinical practice with no reported patient adverse events. Access to results at centre level should be improved. National guidance regarding use of RITA as a tool for contact tracing is required. © 2012 British HIV Association.

  17. Comparing Two Definitions of Work for a Biological Quantum Heat Engine

    International Nuclear Information System (INIS)

    Xu You-Yang; Zhao Shun-Cai; Liu Juan

    2015-01-01

    Systems of photosynthetic reaction centres have been modelled as heat engines, while it has also been reported that the efficiency and power of such heat engines can be enhanced by quantum interference — a trait that has attracted much interest. We compare two definitions of the work of such a photosynthetic heat engine, i.e. definition A used by Weimer et al. and B by Dorfman et al. We also introduce a coherent interaction between donor and acceptor (CIDA) to demonstrate a reversible energy transport. We show that these two definitions of work can impart contradictory results, that is, CIDA enhances the power and efficiency of the photosynthetic heat engine with definition B but not with A. Additionally, we find that both reversible and irreversible excitation-energy transport can be described with definition A, but definition B can only model irreversible transport. As a result, we conclude that definition A is more suitable for photosynthetic systems than definition B. (paper)

  18. The centre of the action

    CERN Multimedia

    2008-01-01

    The CERN Control Centre (CCC) has all the ingredients of an action movie control room: hundreds of screens, technicians buzzing in and out, huge floor-to-ceiling windows revealing the looming vista of a mountain range, flashing lights, microphones… This is the place where not just the LHC, but the whole of CERN’s accelerator complex and technical support is based - truly the centre of the action at CERN.

  19. Defining and describing birth centres in the Netherlands - a component study of the Dutch Birth Centre Study.

    NARCIS (Netherlands)

    Hermus, M.A.A.; Boesveld, I.C.; Hilzert, M.; Franx, A.; Graaf, J.P. de; Steegers, E.A.P.; Wiegers, T.A.; Pal-de Bruin, K.M. van der

    2017-01-01

    Background: During the last decade, a rapid increase of birth locations for low-risk births, other than conventional obstetric units, has been seen in the Netherlands. Internationally some of such locations are called birth centres. The varying international definitions for birth centres are not

  20. Defining and describing birth centres in the Netherlands - a component study of the Dutch Birth Centre Study

    NARCIS (Netherlands)

    Hermus, Marieke A. A.; Boesveld, I. C.; Hitzert, Marrit M; Franx, A.; de Graaf, J. P.; Steegers, E. A P; Wiegers, Therese A.; van der Pal-de Bruin, Karin M.

    2017-01-01

    Background: During the last decade, a rapid increase of birth locations for low-risk births, other than conventional obstetric units, has been seen in the Netherlands. Internationally some of such locations are called birth centres. The varying international definitions for birth centres are not

  1. Current distribution and enhancement of the engineering critical current density in multifilament Bi-2223 tapes

    DEFF Research Database (Denmark)

    Wang, W.G.; Jensen, M.B.; Kindl, B.

    2000-01-01

    The spatial distribution of the critical current density (Jc) and engineering critical current density (Je) along the tape width direction was studied by a cutting technique on Bi-2223 multifilamentary tapes. In general, an increase of Jc towards the centre of the tape was measured. We attribute...... microstructure with a great amount of secondary phases. Local variation of Jc was measured within the centre segment of the tape. This indicates the influence of other factors on Jc, such as filament shape, connectivity of the filaments, and sausaging. Enhancement of Je has been pursued in which average Je of 12...

  2. International Development Research Centre Act Loi sur le Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 juin 2009 ... research includes any scientific or technical inquiry or experimentation that is .... data centres and facilities for research and other activ- ities;. (b) initiate and ..... Loi sur la pension de la fonction publique ne s'applique pas aux ...

  3. Crazy for Ya Ba: methamphetamine use among northern Thai youth.

    Science.gov (United States)

    Cohen, Anjalee

    2014-07-01

    Since the mid-1990s, Thailand has been one of the largest per capita consumers of methamphetamine pills (ya ba - "crazy drug") in the world and one of the leading consumers of methamphetamine in Southeast Asia, with its youth comprising the majority of users. This article examines the socio-cultural context of methamphetamine use among young Thai in order to understand its widespread appeal. The study is based on 18 months of ethnographic research in Chiang Mai, northern Thailand, between 2002 and 2006 and a follow-up field trip in 2011. In-depth interviews were carried out with 211 young people aged between 15 and 25 in institutional and non-institutional settings. Many of the findings derive from participant observation and informal interviews with a small sample of 20 people. Chiang Mai youth have transformed methamphetamine from a labourers' drug centred on economic utility to a multi-purpose youth drug primarily consumed for pleasure and performance. Ya ba appeals to many young Thai due to its positive image as a modern and fashionable consumer commodity, with confidence in these synthetic pills drawing on and mirroring a broader faith in modern (western) medicine. The growing demand for ya ba in northern Thailand is in part a reflection of the changing social values that have accompanied rapid urbanisation and modernisation in Thailand. In their overwhelming aspiration to be modern, young Thai are consuming ya ba not to rebel against the dominant culture, but to keep up with the demands and expectations of a modern capitalist society. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Designing Solutions by a Student Centred Approach: Integration of Chemical Process Simulation with Statistical Tools to Improve Distillation Systems

    Directory of Open Access Journals (Sweden)

    Isabel M. Joao

    2017-09-01

    Full Text Available Projects thematically focused on simulation and statistical techniques for designing and optimizing chemical processes can be helpful in chemical engineering education in order to meet the needs of engineers. We argue for the relevance of the projects to improve a student centred approach and boost higher order thinking skills. This paper addresses the use of Aspen HYSYS by Portuguese chemical engineering master students to model distillation systems together with statistical experimental design techniques in order to optimize the systems highlighting the value of applying problem specific knowledge, simulation tools and sound statistical techniques. The paper summarizes the work developed by the students in order to model steady-state processes, dynamic processes and optimize the distillation systems emphasizing the benefits of the simulation tools and statistical techniques in helping the students learn how to learn. Students strengthened their domain specific knowledge and became motivated to rethink and improve chemical processes in their future chemical engineering profession. We discuss the main advantages of the methodology from the students’ and teachers perspective

  5. Thermoluminescence of Z1 centres in Sr-doped KCl

    International Nuclear Information System (INIS)

    Kamavisdar, V.S.; Moholkar, S.C.; Deshmukh, B.T.

    1980-01-01

    It is well known for alkali halides doped with divalent metal impurities that exposure to high energetic radiation and subsequent F band bleaching leads to the formation of Z 1 centres. Optical absorption measurements have shown that a low concentration of Z 1 centres is produced along with F centres during irradiation without any optical bleaching. Now the question is whether Z 1 centres are really formed along with F centres during irradiation. The aim of the present paper was to study the formation of a small amount of Z 1 centres during irradiation with the help of optical absorption and thermoluminescence measurements. The crystals of KCl:Sr were exposed to γ-rays for different doses. The TL curve for the crystal exposed to a minimum dose of γ-rays shows a TL peak at 457 K and a weak shoulder in the region 400 K to 408 K. The TL curve of the crystal exposed to maximum dose of rays shows the peak at 408 K with a greater intensity. Upon F band bleaching 408 K peak increases in intensity and optical absorption is also broadened. It is shown that the peak at 457 K is due to F centres and the peak at 408 K is due to Z 1 centres. These results clearly show that a small anount of Z 1 centres is really formed along with F centres during irradiation. (author)

  6. Elderly Care Centre

    Science.gov (United States)

    Wagiman, Aliani; Haja Bava Mohidin, Hazrina; Ismail, Alice Sabrina

    2016-02-01

    The demand for elderly centre has increased tremendously abreast with the world demographic change as the number of senior citizens rose in the 21st century. This has become one of the most crucial problems of today's era. As the world progress into modernity, more and more people are occupied with daily work causing the senior citizens to lose the care that they actually need. This paper seeks to elucidate the best possible design of an elderly care centre with new approach in order to provide the best service for them by analysing their needs and suitable activities that could elevate their quality of life. All these findings will then be incorporated into design solutions so as to enhance the living environment for the elderly especially in Malaysian context.

  7. A Process Re-engineering Framework for Reverse Logistics based on a Case Study

    Directory of Open Access Journals (Sweden)

    Hing Kai Chan

    2010-09-01

    Full Text Available Reverse logistics has gained increasing attention in recent years as a channel for companies to achieve operational excellence. The process involves manipulation of returned materials, or even products, which forms a pivotal role in sustainable development throughout the whole supply chains. To make reverse logistics possible, process re-engineering may need to be carried out. However, the processes involved in reengineering are practically complicated. Objectives, benefits, and applicability of any process re-engineering require a careful and detailed strategic planning. This paper aims to propose an easy-to-follow step-by-step framework for practitioners to perform process re-engineering, to learn and identify the critical issues in each step, and to be successful in applying process re-engineering in order to enhance reverse logistics performance. A learner-centred approach is adopted based on a case study of process re-engineering, which is demonstrated in the paper for explanation.

  8. Colour centre-free perovskite single crystals

    International Nuclear Information System (INIS)

    Petit, Pierre-Olivier; Petit, Johan; Goldner, Philippe; Viana, Bruno

    2009-01-01

    Yb 3+ :YAlO 3 (YAP) and Yb 3+ :GdAlO 3 (GAP) are interesting 1 μm high-power laser media thanks to their very good thermo-mechanical properties. However, as-grown perovskite single crystals exhibit colour centres. Parasitic thermal load generated by these centres is deleterious for high-power laser action and can lead to crystal damages. Moreover these defects decrease Yb 3+ lifetime. They are related to trapped holes on the oxygen network. In the present work, several schemes to remove colour centres are presented. Attention is focused on cerium codoping, thermal annealing under reducing atmosphere and growth of non-stoechiometric compounds.

  9. The Tourism Potential of Northern Portugal and Its Relevance for a Regional Branding Strategy

    Directory of Open Access Journals (Sweden)

    Eduardo OLIVEIRA

    2014-12-01

    Full Text Available The purpose of this article is to explore a potential regional branding strategy for the northern part of Portugal, emphasizing the regional tourism potential. Furthermore, it aims to clarify the answers of the following research questions: i is tourism a strategic domain with the potential to integrate a branding strategy at the regional level? ii is a regional branding strategy an engine by which to enable economic and social transformation in the region, thus responding to the contemporary challenges such as weak economic confidence and unemployment? To answer these questions, a content analysis on the policy documents: i Northern Portugal Strategic Guidelines 2014-2020 and ii National Strategic Plan for Tourism 2013-2015 has been performed. In addition, the article details the results of in-depth interviews conducted with two regional entities: i Tourism of Porto and the North of Portugal (TPNP, in charge of national tourism planning and promotion and ii North Regional Coordination and Development Commission (CCDRN, involved in regional planning and development. The findings reinforce the importance of tourism as a strategic domain to boost the economy and create momentum in Northern Portugal. Moreover, tourism is seen by the respondents as a key objective in a regional branding strategy.

  10. Elm Farm Organic Research Centre December 2006

    OpenAIRE

    Sanders, Richard; Whiltley, Andrew; Haigh, Zoe; Clarke, Sarah; Hitchings, Roger; O'Brien, Josie

    2006-01-01

    The Organic Research Centre. Elm Farm Research Centre Bulletin with Technical Updates from The Organic Advisory Service is a regular publication from The Organic Research Centre. The current issue covers: Report from 2006 Cirencester Conference; Quest for more home produced organic food; in a world where bread matters; Improving wheat with plenty of parents; Unlocking the secrets of the ancient (cereal varieties); Brain food- a good read; Not to late to protect the future: The organic...

  11. Documentation Centre of the Association of African Universities.

    Science.gov (United States)

    Chateh, Peter

    This report presents the results of a study of the Documentation Centre of the Association of African Universities (AAU) undertaken to work out proposals for the rational organization of the Centre, and to explore the possibility of computerizing the Centre and linking it with other centers which provide automated documentation services. The…

  12. Northern Ireland gas industry

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R S [Belfast City Council Gas Dept.; Asquith, R S; Brown, J M; McKay, G

    1977-07-01

    Throughout Northern Ireland the production of town gas is derived from hydrocarbon feedstocks. In the larger undertakings in Northern Ireland the feedstock is light distillate; a light petroleum feedstock which is a crude gasoline comprised mainly of pentanes, reformed in catalytic plants. The remaining gas undertakings produce a liquefied petroleum gas (LPG)/air mixture using a mixture of either butane or propane and air. The individual gas units and the type of reforming feedstock are shown. A review of the oil-dependence of town gas and electricity production in Northern Ireland has been considered and is mainly responsible for the high fuel prices experienced in the community. A detailed description of the reforming process has been described, and considerable efforts have been made to optimize the process. In spite of substantial economic savings being made on the processing unit, the gas industry is very susceptible to the changes in oil prices which have escalated rapidly in recent years. The difference in gas prices between the United Kingdom and Northern Ireland indicates that North Sea gas would offer major economic benefits to the gas industry in Northern Ireland, which is operating at a substantial loss at the moment. The industrial concerns, which are dependent on gas and therefore paying high fuel costs, suffer in competition with outside companies. The injection of a moderately cheap natural gas supply to the community may encourage industrial expansion and provide work in a high unemployment area. Although substantial costs must be incurred in distribution pipelines and burner conversions if Northern Ireland changes to natural gas, there appears to be a strong case to introduce North Sea gas in the near future.

  13. Higgs Reconstructed at CERN’s Computer Centre

    CERN Multimedia

    2012-01-01

    Thanks to the enormous computing capacity of the CERN Computer Centre, which hosts about 12,000 servers with 16,000 CPUs (i.e. 64,000 computing cores) and 64,000 hard-disks distributed over 1,100 racks and storing another 22 PB (PetaByte, i.e. 22 million billion bytes) of LHC data during 2011, CERN computing specialists have managed for the first time to reconstruct the “Higgs” (see photo below in which the newly installed racks are highlighted).   In fact, as clear physics evidence of the Higgs is still pending and expected to be established in 2012, the CERN Computer Centre operators have instead rearranged their computer racks in the Computer Centre (Building 513) to spell the word “Higgs”. Bruce Peppa, group leader of the IT/CC group who manages the Computer Centre, said “As many people have noticed, for a few months serious construction work has been going on in the annex to the CERN Computer Centre. With the installation of more servers ...

  14. Centre for urban ecotechnology in ''Oeksnehallen''. [Copenhagen, Denmark

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Lord Mayor's Department of the municipality of Copenhagen, Denmark, has with support from this project made a proposal for the establishment of the Centre for Urban Ecotechnology in ''Oeksnehallen'', located in the Vesterbro area of the city. The centre should contribute to the dissemination of knowledge on ecological techniques (regarding passive solar energy etc.) to the inhabitants of Vesterbro and other citizens of Copenhagen, and also serve as a centre in an European context. The ecological demonstration centre will cover an area of two thousand square meters and will also include a cafe, a room for showing coloured slides, facilities for exhibitions created by the center and interested firms etc. The centre should play an important role as part of the ecological concept of urban renewal in Vesterbro. (author).

  15. An overview of activities of nuclear data physics centre of India (NDPCI)

    International Nuclear Information System (INIS)

    Saxena, Alok

    2015-01-01

    India has a three stage nuclear power programme which requires accurate inputs of nuclear data for design and safe operation of existing as well as for the design of new and innovative reactors. Apart from that nuclear data is required for accelerator shield design, personal dosimetry, radiation safety, production of radioisotopes, radiation damage studies, waste transmutation etc. To cater to various needs of department, the Nuclear Data Physics Centre of India (NDPCI) was formed in 2010-11 to provide a platform for coordinated efforts in all aspects of nuclear data, viz., measurements, analysis, compilation and evaluation involving national laboratories and universities in India. The NDPCI has projects / collaborations with universities and various units of department of atomic energy (DAE) across India involving physicist, radio-chemists, reactor physicists and computer engineers. A number of projects have been awarded under NDPCI to various universities to involve faculties and students in nuclear reactions, nuclear structure and EXFOR compilations. The NDPCI is presently a virtual centre under Board of Research in Nuclear Sciences of DAE and functions through two committees namely Program Implementation Committee and Program Review Committee involving scientists and faculties from various divisions of DAE units and universities. A brief account of NDPCI activities carried out by our researchers is described in this report

  16. Open Access Centre at the Nature Research Centre: a facility for enhancement of scientific research, education and public outreach in Lithuania

    Science.gov (United States)

    Šerpenskienė, Silvija; Skridlaitė, Gražina

    2014-05-01

    etc. Applications for a grant of open access shall be received online in accordance with the established procedure via the NRC website (www.gamtostyrimai.lt). State-of-the-art equipment enables researchers to carry out up-to-date scientific research and educational projects, scientific experiments, graduation and laboratory works. Scientists, researchers and students get the opportunity to deepen their knowledge, conduct new research in the field of natural sciences, to obtain new data to be used for further studies as well as for the development of products of higher added value. Favourable conditions are created for pursuing and developing higher level scientific research, for the implementation of joint and interdisciplinary projects, for enhancing cooperation between business and public institutions as well as between those of studies and science. The implementation of the above mentioned tasks leads to the enhanced competitiveness of Lithuanian scientists and researchers and to dissemination of the high quality scientific knowledge for a society. Tens of students from different universities and researchers from other institutions are using the OAC facilities. "Pan-European coordination action on CO2 Geological Storage (CGS Europe)"; "GEO-SEAS"; "EMODNET"; "Securing the Conservation of biodiversity across Administrative Levels and spatial, temporal, and Ecological Scales (SCALES)"; "Decline Of Fraxinus excelsior in northern Europe" and other projects are being carried out at the OAC so far. This is a contribution to the Open Access Centre activities

  17. Radiological monitoring of northern slopes of Mogoltau

    International Nuclear Information System (INIS)

    Murtazaev, Kh.; Boboev, B.D.; Bolibekov, Sh.; Akhmedov, M.Z.

    2010-01-01

    Present article is devoted to radiological monitoring of northern slopes of Mogoltau. The physicochemical properties of water of northern slopes of Mogoltau were studied. The radiation monitoring of northern slopes of Mogoltau was carried out during several years under various weather conditions. The exposure rate of human settlements of northern part of Mogoltau was defined.

  18. Objective determination of the extratropical transition of tropical cyclones in the Northern Hemisphere

    Directory of Open Access Journals (Sweden)

    Joshua Studholme

    2015-05-01

    Full Text Available Extratropical transition (ET has eluded objective identification since the realisation of its existence in the 1970s. Recent advances in numerical, computational models have provided data of higher resolution than previously available. In conjunction with this, an objective characterisation of the structure of a storm has now become widely accepted in the literature. Here we present a method of combining these two advances to provide an objective method for defining ET. The approach involves applying K-means clustering to isolate different life-cycle stages of cyclones and then analysing the progression through these stages. This methodology is then tested by applying it to five recent years from the European Centre of Medium-Range Weather Forecasting operational analyses. It is found that this method is able to determine the general characteristics for ET in the Northern Hemisphere. Between 2008 and 2012, 54% (±7, 32 of 59 of Northern Hemisphere tropical storms are estimated to undergo ET. There is great variability across basins and time of year. To fully capture all the instances of ET is necessary to introduce and characterise multiple pathways through transition. Only one of the three transition types needed has been previously well-studied. A brief description of the alternate types of transitions is given, along with illustrative storms, to assist with further study.

  19. Teaching and training programmes in nuclear medicine for medical and paramedical personnel at the Radiation Medicine Centre, Bhabha Atomic Research Centre

    International Nuclear Information System (INIS)

    Sharma, S.M.; Raikar, U.R.

    1986-01-01

    Prior to 1976, the Radiation Medicine Centre had conducted 12 short courses of five weeks' duration on medical uses of radioisotopes. A total of 162 medical and scientific personnel attended the courses from various parts of India. Owing to the rapid advances made in nuclear medicine these courses were becoming inadequate, and in 1973 the Centre introduced one-year full time training courses for doctors and science graduates, peparing them for examinations for the Diploma in Radiation Medicine (DRM) and the Diploma in Medical Radioisotope Techniques (DMRIT) of the University of Bombay. By March 1984, 64 doctors and 53 technologists had obtained the DRM and DMRIT. A recent survey indicated that 70% of the DRM physicians and 68% of the DMRIT technologists are employed in nuclear medicine departments. Besides the formal one-year training courses, the Centre has conducted advanced courses of two weeks' duration on scintigraphy and thyroid function tests. The Radiation Medicine Centre has been the regional reference centre in nuclear medicine for the World Health Organization and International Atomic Energy Agency for more than ten years. The Centre has trained sponsored personnel from other countries of the region. The Centre has also organized seven symposia, workshops and seminars, four of them in collaboration with WHO and one with the IAEA. (author)

  20. ABCGheritage project - promoting geotourism in northern Finland, northern Norway and the Kola Peninsula

    Science.gov (United States)

    Pihlaja, Jouni; Johansson, Peter; Lauri, Laura S.

    2014-05-01

    Nature tourism has been a growing business sector in the Barents area during the recent decades. With the purpose to develop nature tourism in a sustainable way, a cooperation project ABCGheritage - Arctic Biological, Cultural and Geological Heritage has been carried out. Project has received partial funding from the EU Kolarctic ENPI program. In the geoheritage part of the project the main activities were aimed to develop pro-environmental ways of geotourism in the area. The three main participants in the geoheritage part of the project are the Geological Survey of Finland, Northern Finland Office, the Geological Institute of the Kola Science Centre of the Russian Academy of Sciences and Bioforsk Soil and Environment from northeastern Norway. The duration of the project is 2012-2014 and most of the work has already been completed even if most of the results are not published yet. Totally ten different tasks have been implemented in the geological part of the project. The largest task has been the preparation of a geological outdoor map and guide book of the Khibiny Tundra locating in the central part of the Kola Peninsula. In Finland already 11 such maps have been published, and the experiences gained during their production have been used in this project, too. Geological heritage trails to the Khibiny Tundra have also been created and they will be drawn on the map. The second concrete result is the Barents Tour for Geotourist -guide, which will be published as a guide book, web pages and an exhibition. The route comprises ca 35 best geological demonstration sites along the circle route from northern Finland to northeastern Norway, from there to Kola Peninsula and then back to Finland. Information of the route will be available for all interested travelers. In addition to the geological outdoor map of the Khibiny Tundra and "Barents Tour for Geotourists"-guide, the primary outputs of the project are the geological nature trails on the field, geological

  1. Centre of the Cell: Science Comes to Life.

    Science.gov (United States)

    Balkwill, Frances; Chambers, Katie

    2015-01-01

    Centre of the Cell is a unique biomedical science education centre, a widening participation and outreach project in London's East End. This article describes Centre of the Cell's first five years of operation, the evolution of the project in response to audience demand, and the impact of siting a major public engagement project within a research laboratory.

  2. The Belgian Nuclear Higher Education Network: Your way to the European Master in Nuclear Engineering

    International Nuclear Information System (INIS)

    Moons, F.; D'haeseleer, W.; Giot, M.

    2004-01-01

    BNEN, the Belgian Nuclear Higher Education Network has been created in 2001 by five Belgian universities and the Belgian Nuclear Research Centre (SCK CEN) as a joint effort to maintain and further develop a high quality programme in nuclear engineering in Belgium. More information: http://www.sckcen.be/BNEN. (author)

  3. Potential of Natural Ventilation in Shopping Centres

    DEFF Research Database (Denmark)

    Diederichsen, Alice; Friis, Kristina; Brohus, Henrik

    2008-01-01

    The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV) in shop......The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV......) in shopping centres with focus on both the achieved IEQ and energy consumptions for air movement. By thermal building simulations it is found that there exists an interesting potential for hybrid ventilation of shopping centres, which can lead to great savings in the electrical energy consumptions...

  4. User-Centred BCI Videogame Design

    OpenAIRE

    Loup-Escande , Emilie; Lotte , Fabien; Loup , Guillaume; Lécuyer , Anatole

    2015-01-01

    International audience; This chapter aims to offer a user-centred methodological framework to guide the design and evaluation of Brain-Computer Interface videogames. This framework is based on the contributions of ergonomics to ensure these games are well suited for their users (i.e., players). It provides methods, criteria and metrics to complete the different phases required by ae human-centred design process. This aims to understand the context of use, specify the user needs and evaluate t...

  5. Optical Methods For Automatic Rating Of Engine Test Components

    Science.gov (United States)

    Pritchard, James R.; Moss, Brian C.

    1989-03-01

    In recent years, increasing commercial and legislative pressure on automotive engine manufacturers, including increased oil drain intervals, cleaner exhaust emissions and high specific power outputs, have led to increasing demands on lubricating oil performance. Lubricant performance is defined by bench engine tests run under closely controlled conditions. After test, engines are dismantled and the parts rated for wear and accumulation of deposit. This rating must be consistently carried out in laboratories throughout the world in order to ensure lubricant quality meeting the specified standards. To this end, rating technicians evaluate components, following closely defined procedures. This process is time consuming, inaccurate and subject to drift, requiring regular recalibration of raters by means of international rating workshops. This paper describes two instruments for automatic rating of engine parts. The first uses a laser to determine the degree of polishing of the engine cylinder bore, caused by the reciprocating action of piston. This instrument has been developed to prototype stage by the NDT Centre at Harwell under contract to Exxon Chemical, and is planned for production within the next twelve months. The second instrument uses red and green filtered light to determine the type, quality and position of deposit formed on the piston surfaces. The latter device has undergone feasibility study, but no prototype exists.

  6. The Belgian nuclear research centre

    International Nuclear Information System (INIS)

    Moons, F.

    2001-01-01

    The Belgian Nuclear Research Centre is almost exclusively devoted to nuclear R and D and services and is able to generate 50% of its resources (out of 75 million Euro) by contract work and services. The main areas of research include nuclear reactor safety, radioactive waste management, radiation protection and safeguards. The high flux reactor BR2 is extensively used to test fuel and structural materials. PWR-plant BR3 is devoted to the scientific analysis of decommissioning problems. The Centre has a strong programme on the applications of radioisotopes and radiation in medicine and industry. The centre has plans to develop an accelerator driven spallation neutron source for various applications. It has initiated programmes to disseminate correct information on issues of nuclear energy production and non-energy nuclear applications to different target groups. It has strong linkages with the IAEA, OECD-NEA and the Euratom. (author)

  7. Institutional Support : Centre for Research and Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

  8. Waste management in primary healthcare centres of Iran.

    Science.gov (United States)

    Mesdaghinia, Alireza; Naddafi, Kazem; Mahvi, Amir Hossein; Saeedi, Reza

    2009-06-01

    The waste management practices in primary healthcare centres of Iran were investigated in the present study. A total of 120 primary healthcare centres located across the country were selected using the cluster sampling method and the current situation of healthcare waste management was determined through field investigation. The quantities of solid waste and wastewater generation per outpatient were found to be 60 g outpatient(-1) day(-1) and 26 L outpatient(-1) day(-1), respectively. In all of the facilities, sharp objects were separated almost completely, but separation of other types of hazardous healthcare solid waste was only done in 25% of the centres. The separated hazardous solid waste materials were treated by incineration, temporary incineration and open burning methods in 32.5, 8.3 and 42.5% of the healthcare centres, respectively. In 16.7% of the centres the hazardous solid wastes were disposed of without any treatment. These results indicate that the management of waste materials in primary healthcare centres in Iran faced some problems. Staff training and awareness, separation of healthcare solid waste, establishment of the autoclave method for healthcare solid waste treatment and construction of septic tanks and disinfection units in the centres that were without access to a sewer system are the major measures that are suggested for improvement of the waste management practices.

  9. The Manche Storage Centre: 2009 annual report

    International Nuclear Information System (INIS)

    2010-01-01

    After a brief presentation of the ANDRA (the French national agency for the management of radioactive wastes), this report presents the CSM installations (CSM stands for Centre de Stockage de la Manche, the Manche storage centre), recalls results and actions in the field of nuclear safety and in the field of radioprotection. It indicates incidents and accidents which occurred in the installations, presents data about the Centre's releases. It presents the waste management and evokes other pollution. It indicates the various actions undertaken for information transparency

  10. Understanding the role of local management in vegetation recovery around pastoral settlements in northern Kenya.

    Science.gov (United States)

    Roba, Hassan G; Oba, Gufu

    2013-04-01

    The recent greening of the Sahel region and increase in vegetation cover around pastoral settlements previously described as "man-made deserts", have raised important questions on the permanency of land degradation associated with the over-exploitation of woody plants. Evidence presented is mostly on increased wetness, while management by local communities has received limited attention. This study evaluated changes in woody vegetation cover around the settlements of Kargi and Korr in northern Kenya, using satellite imagery (1986/2000), ecological ground surveys and interviews with local elders, in order to understand long-term changes in vegetation cover and the role of local community in vegetation dynamics. At both settlements, there were increments in vegetation cover and reduction in the extent of bare ground between 1986 and 2000. At Kargi settlement, there were more tree seedlings in the centre of settlement than further away. Mature tree class was more abundant in the centre of Korr than outside the settlement. The success of the regeneration and recovery of tree cover was attributed to the actions of vegetation management initiative including stringent measures by the local Environmental Management Committees. This study provides good evidence that local partnership is important for sustainable management of resources especially in rural areas where the effectiveness of government initiative is lacking.

  11. Effects and meanings of a person-centred and health-promoting intervention in home care services - a study protocol of a non-randomised controlled trial.

    Science.gov (United States)

    Bölenius, Karin; Lämås, Kristina; Sandman, Per-Olof; Edvardsson, David

    2017-02-16

    The literature indicates that current home care service are largely task oriented with limited focus on the involvement of the older people themselves, and studies show that lack of involvement might reduce older people's quality of life. Person-centred care has been shown to improve the satisfaction with care and quality of life in older people cared for in hospitals and nursing homes, with limited published evidence about the effects and meanings of person-centred interventions in home care services for older people. This study protocol outlines a study aiming to evaluate such effects and meanings of a person-centred and health-promoting intervention in home aged care services. The study will take the form of a non-randomised controlled trial with a before/after approach. It will include 270 older people >65 years receiving home care services, 270 relatives and 65 staff, as well as a matched control group of equal size. All participants will be recruited from a municipality in northern Sweden. The intervention is based on the theoretical concepts of person-centredness and health-promotion, and builds on the four pedagogical phases of: theory apprehension, experimental learning, operationalization, and clinical supervision. Outcome assessments will focus on: a) health and quality of life (primary outcomes), thriving and satisfaction with care for older people; b) caregiver strain, informal caregiving engagement and relatives' satisfaction with care: c) job satisfaction and stress of conscience among care staff (secondary outcomes). Evaluation will be conducted by means of self-reported questionnaires and qualitative research interviews. Person-centred home care services have the potential to improve the recurrently reported sub-standard experiences of home care services, and the results can point the way to establishing a more person-centred and health-promoting model for home care services for older people. NCT02846246 .

  12. Let justice flow : report of the interchurch inquiry into Northern Hydro Development

    Energy Technology Data Exchange (ETDEWEB)

    Aitchison, J.; McKay, S.; Norrie, H.; Eek, A. Van

    2001-07-01

    Aboriginals have always cared for their homeland. Hydroelectric development on the northern Manitoba rivers has resulted in a re engineering of the watersheds and has had a major impact on Aboriginal people. The hydroelectric development in the region supplies approximately 75 per cent of the electricity produced in Manitoba. Environmental and cultural disruption to the people living in the area resulted from the Churchill-Nelson Hydroelectric Project (the Project). The commissioners of the inquiry believe that solutions based on generosity and unwavering justice must be found to avoid a northern crisis. The environmental effects and social trauma caused by the Project were addressed by several presenters at the inquiry, which was held June 21-23, 2001 in Winnipeg and June 24-25, 2001 in Cross Lake, Manitoba. Part II of the report outlined the damages to the watersheds. The governments of Manitoba, Canada, as well as Manitoba Hydro are addressing adverse impacts in this document, but the authors indicated that concerted efforts are required. A list of recommendations was included in the document. The spokespersons for the governments of Manitoba, Canada and Manitoba Hydro had a different perspective concerning whether the adverse conditions were caused by the Project or whether they originated elsewhere. The Northern Flood Agreement (1977) is discussed in the next section, followed by a discussion of the South Indian and Fox Lake First Nation, two of the most affected communities. The panel recommended that rights and benefits comparable to those offered under the Northern Flood Agreement be granted to these people. The restoration of damaged ecosystems and the socio-economic recovery of the affected communities are required to extend the success of the hydroelectric project and attain self-sufficiency. 25 refs.

  13. Let justice flow : report of the interchurch inquiry into Northern Hydro Development

    International Nuclear Information System (INIS)

    Aitchison, J.; McKay, S.; Norrie, H.; Eek, A. Van

    2001-01-01

    Aboriginals have always cared for their homeland. Hydroelectric development on the northern Manitoba rivers has resulted in a re engineering of the watersheds and has had a major impact on Aboriginal people. The hydroelectric development in the region supplies approximately 75 per cent of the electricity produced in Manitoba. Environmental and cultural disruption to the people living in the area resulted from the Churchill-Nelson Hydroelectric Project (the Project). The commissioners of the inquiry believe that solutions based on generosity and unwavering justice must be found to avoid a northern crisis. The environmental effects and social trauma caused by the Project were addressed by several presenters at the inquiry, which was held June 21-23, 2001 in Winnipeg and June 24-25, 2001 in Cross Lake, Manitoba. Part II of the report outlined the damages to the watersheds. The governments of Manitoba, Canada, as well as Manitoba Hydro are addressing adverse impacts in this document, but the authors indicated that concerted efforts are required. A list of recommendations was included in the document. The spokespersons for the governments of Manitoba, Canada and Manitoba Hydro had a different perspective concerning whether the adverse conditions were caused by the Project or whether they originated elsewhere. The Northern Flood Agreement (1977) is discussed in the next section, followed by a discussion of the South Indian and Fox Lake First Nation, two of the most affected communities. The panel recommended that rights and benefits comparable to those offered under the Northern Flood Agreement be granted to these people. The restoration of damaged ecosystems and the socio-economic recovery of the affected communities are required to extend the success of the hydroelectric project and attain self-sufficiency. 25 refs

  14. Gestion du Centre | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le Comité de gestion du Centre (CGC) est composé des membres de la haute direction du CRDI, notamment les directeurs de nos quatre bureaux régionaux et de nos principaux secteurs de programme. Le CGC travaille en collaboration avec le président afin de soutenir la recherche pour le développement, lui fournissant ...

  15. A Preliminary Analysis of Solar Irradiance Measurements at TNB Solar Research Centre for Optimal Orientation of Fixed Solar Panels installed in Selangor Malaysia

    International Nuclear Information System (INIS)

    Hashim, A M; Ahmad, B; Shafie, R M; Rusli, R; Aziz, M A; Hassan, J; Wanik, M Z C; Ali, M A M

    2013-01-01

    The well established rule for orienting fixed solar devices is to face south for places in the northern hemisphere and northwards for the southern hemisphere. However for regions near the equator such as in Selangor Malaysia, the position of the sun at solar noon is always near zenith both to the north and south depending on location and month of year. This paper reports an analysis of global solar radiation data taken at TNB Solar Research Centre, Malaysia. The solar radiation is measured using both shaded and exposed pyranometers together with a pyrheliometer which is mounted on a sun-tracker. The analysis on the solar measurements show that a near regular solar irradiation pattern had occurred often enough during the year to recommend an optimum azimuth orientation of installing the fixed solar panels tilted facing towards east. Even though all the solar measurements were done at a single location in TNBR Solar Research Centre at Bangi, for locations near the equator with similar weather pattern, the recommended azimuth direction of installing fixed solar panels and collectors tilted eastward will also be generally valid.

  16. Pulmonary hypertension: Real-world data from a Portuguese expert referral centre.

    Science.gov (United States)

    Gomes, A; Cruz, C; Rocha, J; Ricardo, M; Vicente, M; Melo, A; Santos, M; Carvalho, L; Gonçalves, F; Reis, A

    2018-04-16

    Pulmonary hypertension (PH) is a heterogeneous, debilitating condition with highly relevant impact on functional capacity, quality of life, and life-expectancy. This study aims to provide long-term data on the Portuguese PH population, by characterising the clinical presentation, evolution, and outcomes of PH patients in a specialised referral centre. Retrospective analysis of a cohort of 101 patients with pre-capillary PH (pcPH) referenced to an expert tertiary care referral centre in northern Portugal from 2002 to 2013. Diagnosis was confirmed by right heart catheterisation (RHC). PH classification followed consensus criteria from the 5th World Symposium in Nice, 2013. The most frequent causes of pcPH were Group 1 PH - pulmonary arterial hypertension (PAH) (54.4%) and Group 4 PH - Chronic thromboembolic pulmonary hypertension (CTEPH) (25.7%); importantly, 17.8% of patients presented PH associated with multiple aetiologies. Targeted therapy was used in 91.1% of patients (48.5% combination therapy). 1-, 3-, and 5-year survival was estimated at 86.6%, 76.7%, and 64.1%, respectively. Survival was significantly better for those ≤40 years old (10.5 vs. 6.4 years; P=0.003) and for women with I/HPAH (9.3 vs. 4.5 years; P=0.039). This study provides long-term, real-world data for the management of PAH and CTEPH in Portugal and demonstrates the importance of dedicated electronic medical records and well defined clinical management protocols for better patient outcomes. Patients presented mostly with intermediate or high risk of mortality, which suggests delayed diagnosis and highlights the need to increase awareness among clinicians. Copyright © 2018 Sociedade Portuguesa de Pneumologia. Published by Elsevier España, S.L.U. All rights reserved.

  17. Airborne remote sensors applied to engineering geology and civil works design investigations

    Science.gov (United States)

    Gelnett, R. H.

    1975-01-01

    The usefulness of various airborne remote sensing systems in the detection and identification of regional and specific geologic structural features that may affect the design and location of engineering structures on major civil works projects is evaluated. The Butler Valley Dam and Blue Lake Project in northern California was selected as a demonstration site. Findings derived from the interpretation of various kinds of imagery used are given.

  18. The Role of Parents' Educational Level and Centre Type in Parent Satisfaction with Early Childhood Care Centres: A Study in Greece

    Science.gov (United States)

    Kelesidou, Sofia; Chatzikou, Maria; Tsiamagka, Evmorfia; Koutra, Evangelia; Abakoumkin, Georgios; Tseliou, Eleftheria

    2017-01-01

    This research examines specific facets of parent satisfaction with childcare centres, namely satisfaction with parent-centre communication and the educational services they provide, as well as respective parent beliefs. These were investigated in relation to centre type (private vs public) and parents' education. Parents of different educational…

  19. Teaching in English at Engineering Education in Denmark

    DEFF Research Database (Denmark)

    Gregersen, Anne

    2017-01-01

    is a collaboration between LearningLab DTU, The Technical University of Denmark, CUCE, Copenhagen University College of Engineering, and AAU, Aalborg University. The purpose of the project has been to develop a concept for an English course that combines language development skills with teaching methodology...... of the internationalisation process that higher education is undergoing, and as a means to further transnational student mobility. The current debate at Danish universities centres upon possible implications of teaching in English for the quality of the courses, including the question of whether the teachers are sufficiently...... equipped to meet the challenges of teaching in English. This paper presents and discusses experience gained from a pilot project initiated by LearningLab DTU and funded by a national fund, “Competency Development of Teachers who are Teaching in English at Engineering Education in Denmark”. The project...

  20. Adaptability of black walnut, black cherry, and Northern red oak to Northern California

    Science.gov (United States)

    Philip M. McDonald

    1987-01-01

    When planted in sheltered sites in northern California, only 49% of black walnut (Juglans nigra L.) and 58% of black cherry (Prunus serotina Ehrh.) survived for 15 years, and 20% of northern red oak (Quercus rubra L.) survived for 10 years. The black walnut trees averaged 0.6 inches diameter at breast...

  1. From the Northern Eurasia Earth Science Partnership Initiative to the Northern Eurasia Future Initiative

    Science.gov (United States)

    Streletskiy, D. A.; Groisman, P. Y.; Shugart, H. H., Jr.; Gulev, S.; Maksyutov, S. S.; Qi, J.

    2017-12-01

    Since 2004, the Northern Eurasia Earth Science Partnership Initiative (NEESPI) - an interdisciplinary program of internationally-supported Earth systems and science research - has addressed large-scale and long-term manifestations of climate and environmental changes over Northern Eurasia and their impact on the Global Earth system. With 40 books and more than 1500 peer-reviewed journal publications to its credit, NEESPI's output can now be used to directly support decision-making for societal needs. Specifically, it was decided to shift gradually the foci of regional studies in Northern Eurasia towards applications with the following major Science Question: "What dynamic and interactive change(s) will affect societal well-being, activities, and health, and what might be the mitigation and adaptation strategies that could support sustainable development and decision-making activities in Northern Eurasia?" To answer this question requires a stronger socio-economic component in the ongoing and future regional studies focused on sustainable societal development under changing climatic and environmental conditions. The NEESPI Research Team has reorganized itself into "Northern Eurasia Future Initiative" (NEFI) and developed a new Science Plan released in June 2016. The Plan underwent a 6-month-long public review and was finalized at the end of 2016. Its description was thereafter split between two review papers: Groisman et al. (2017) and Monier et al. (2017). The first paper describes the Plan rationale and a new set of topical questions. The second paper describes a major modeling approach that will be employed in addressing the "what to do" questions of the NEFI Research (cf., presentation by Monier et al. at this Session). In the current presentation, we outline the new NEFI research foci and present latest NEFI findings including international projects in the Eurasian Arctic, boreal zone, and the Dry Land Belt of Northern Eurasia (cf., also presentations at sister

  2. Addiction research centres and the nurturing of creativity The Norwegian Centre for Addiction Research (SERAF).

    Science.gov (United States)

    Bramness, Jørgen G; Clausen, Thomas; Duckert, Fanny; Ravndal, Edle; Waal, Helge

    2011-08-01

    The Norwegian Centre for Addiction Research (SERAF) at the University of Oslo is a newly established, clinical addiction research centre. It is located at the Oslo University Hospital and has a major focus on opioid dependency, investigating Norwegian opioid maintenance treatment (OMT), with special interest in OMT during pregnancy, mortality, morbidity and criminality before, during and after OMT and alternatives to OMT, such as the use of naltrexone implants. The well-developed health registries of Norway are core assets that also allow the opportunity for other types of substance abuse research. This research includes health services, abuse of prescription drugs and drugs of abuse in connection with traffic. The centre also focuses upon comorbidity, investigating the usefulness and limitations of psychometric instruments, drug abuse in different psychiatric treatment settings and internet-based interventions for hazardous alcohol consumption. © 2010 The Authors, Addiction © 2010 Society for the Study of Addiction.

  3. Resorts, second home owners and distance: a case study in northern Finland

    Directory of Open Access Journals (Sweden)

    Pekka Kauppila

    2010-11-01

    Full Text Available One of the most important factors for the site selection of a second home is the space-time dimension. For example, the popularity of second home tourism in the hinterland of population centres is based on the short distance between second homes and the permanent residence of second home owners. In the case of peripheral resorts, however, the main reason for a large number of second homes is the attractiveness of the area associated with a high level of touristic elements. The study examines the municipalities of residence of the second home owners in four large resorts – Levi, Ruka, Saariselkä and Ylläs – in northern Finland. After analysing the geographical distribution of the owners with maps and diagrams the aim of the paper is to present a distance model for the resorts located in a northern periphery from the viewpoint of the regions of destination. Generally speaking, the model resembles a U-letter. In this respect, the resorts have three zones – day trip, weekend and vacation – and each of them has their own characteristics based on accessibility and regional structure, the number and structure of population (potential owners and land ownership. In the planning context, the proposed model can be utilised as a tool for the marketing of resorts as a second home environment as well as for analysing and comparing the overall attractiveness of resorts.

  4. Engineering toxins for 21st century therapies.

    Science.gov (United States)

    Chaddock, John A; Acharya, K Ravi

    2011-04-01

    'Engineering Toxins for 21st Century Therapies' (9-10 September 2010) was part of the Royal Society International Seminar series held at the Kavli International Centre, UK. Participants were assembled from a range of disciplines (academic, industry, regulatory, public health) to discuss the future potential of toxin-based therapies. The meeting explored how the current structural and mechanistic knowledge of toxins could be used to engineer future toxin-based therapies. To date, significant progress has been made in the design of novel recombinant biologics based on domains of natural toxins, engineered to exhibit advantageous properties. The meeting concluded, firstly that future product development vitally required the appropriate combination of creativity and innovation that can come from the academic, biotechnology and pharma sectors. Second, that continued investigation into understanding the basic science of the toxins and their targets was essential in order to develop new opportunities for the existing products and to create new products with enhanced properties. Finally, it was concluded that the clinical potential for development of novel biologics based on toxin domains was evident. © 2011 The Authors Journal compilation © 2011 FEBS.

  5. International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Otsuka, Naohiko; Dunaeva, Svetlana

    2010-11-01

    The activities of fourteen nuclear data centres are summarized, and their cooperation under the auspices of the International Atomic Energy Agency is described. Each of the centres provides coverage for different geographical zones and/or specific types of nuclear data, thus together providing a complete service for users worldwide. The International Network of Nuclear Reaction Data Centres (NRDC) was established with the objective of providing nuclear physics databases that are required for nuclear technology (encompassing energy and non-energy applications) by coordinating the collection, compilation and dissemination of nuclear data on an international scale. (author)

  6. Japanese maintenance centres strive for greater realism

    International Nuclear Information System (INIS)

    Nedderman, J.

    1987-01-01

    Japanese utilities have devoted considerable efforts to ensuring that realistic plant conditions are simulated at their maintenance centres. In some centres, eg that of Kansai Electric Power Co, realism extends to difficult access, limited lighting and restricted ventilation. (author)

  7. Microsystem engineering of lab-on-a-chip devices

    CERN Document Server

    Geschke, Oliver; Telleman, Pieter

    2006-01-01

    Written on a non-specialist level by an interdisciplinary team of chemists, biologists and engineers from one of Europe's leading centres for microsystem research, the Danish Mikroelektronik Centret (MIC), this is a concise practical introduction to the subject. As such, the book is the first to focus on analytical applications, providing life and analytical scientists, biotechnologists and pharmaceutists with an understanding of the principles behind the design and manufacture of chemical and biochemical microsystems. The text is backed by a chapter devoted to troubleshooting as well as a g

  8. The April 16 2016 Mw7.8 Muisne Earthquake in Ecuador – Preliminary Observations from the EEFIT Reconnaissance Mission of May 24 - June 7

    OpenAIRE

    Franco, G.; Stone, H.; Ahmed, B.; Chian, S. C.; Hughes, F.; Jirouskova, N.; Kaminski, S.; Lopez, J.; van Drunen, N.; Querembas, M.

    2017-01-01

    On April 16 2016 an Mw7.8 earthquake with epicentre 29km south-southeast of Muisne in northern Manabí caused around 700 fatalities, injured 30,000 and destroyed several sections of the towns of Pedernales, Portoviejo, Canoa, Bahía de Caráquez and Manta, most of them important centres of tourism on the coast of Ecuador. During May 24-June 7 a team was deployed by the Earthquake Engineering Field Investigation Team (EEFIT) with the objective of surveying the damage and recording obs...

  9. Solar energy in the Northern Cameroon

    International Nuclear Information System (INIS)

    Djuikom, M.; Ndjomaha, Ch.; Vandenbergh, M.

    2004-01-01

    In 2003, the Cameroon Ministry of the Environment and Forestry has initiated a research project for studying the promotion of renewable energies and their impact on rural development. This work has been realized jointly with the department of Economy and Rural Development of the Agronomic University of Gembloux (Belgium), the Centre Des Etudes de L'Environnement et de Developpement du Cameroun (CEDC, Maroua) and the Institut fur Solare Energieversorgungstechnik (ISET, Germany). This initiative comes when the electricity sector in Cameroon has been facing important changes (Privatization of the national company of electricity, creation of a rural electrification agency, multiplication of the dialogues and seminars around the strategies of promotion for renewable energies, frequent black-outs during the dry season). The first objective of the project is to contribute to a better knowledge of the situation of the use of renewable energies in Cameroon. Therefore, Mrs Marthe Djuikom undertook from July to September 2003 a socio-economic survey on the use of solar energy in the northern Cameroon. The next step will be the creation of an energy program at the CEDC with the following tasks: promotion of photovoltaic technology, support of local and international synergies on the organisational aspects, training, information and coordination of reflexions at the local level for the promotion of rural electrification projects. (authors)

  10. Energy efficiency in U.K. shopping centres

    Science.gov (United States)

    Mangiarotti, Michela

    Energy efficiency in shopping centres means providing comfortable internal environment and services to the occupants with minimum energy use in a cost-effective and environmentally sensitive manner. This research considers the interaction of three factors affecting the energy efficiency of shopping centres: i) performance of the building fabric and services ii) management of the building in terms of operation, control, maintenance and replacement of the building fabric and services, and company's energy policy iii) occupants' expectation for comfort and awareness of energy efficiency. The aim of the investigation is to determine the role of the above factors in the energy consumption and carbon emissions of shopping centres and the scope for reducing this energy usage by changing one or all the three factors. The study also attempts to prioritize the changes in the above factors that are more cost-effective at reducing that energy consumption and identify the benefits and main economic and legal drivers for energy efficiency in shopping centres. To achieve these targets, three case studies have been analysed. Using energy data from bills, the performance of the selected case studies has been assessed to establish trends and current energy consumption and carbon emissions of shopping centres and their related causes. A regression analysis has attempted to break down the energy consumption of the landlords' area by end-use to identify the main sources of energy usage and consequently introduce cost-effective measures for saving energy. A monitoring and occupants' survey in both landlords' and tenants' areas have been carried out at the same time to compare the objective data of the environmental conditions with the subjective impressions of shoppers and shopkeepers. In particular, the monitoring aimed at assessing the internal environment to identify possible causes of discomfort and opportunities for introducing energy saving measures. The survey looked at

  11. Addiction research centres and the nurturing of creativity: National Drug Dependence Treatment Centre, India--a profile.

    Science.gov (United States)

    Ray, Rajat; Dhawan, Anju; Chopra, Anita

    2013-10-01

    The National Drug Dependence Treatment Centre (NDDTC) is a part of the All India Institute of Medical Sciences, a premier autonomous medical university in India. This article provides an account of its origin and its contribution to the field of substance use disorder at the national and international levels. Since its establishment, the NDDTC has played a major role in the development of various replicable models of care, the training of post-graduate students of psychiatry, research, policy development and planning. An assessment of the magnitude of drug abuse in India began in the early 1990s and this was followed by a National Survey on Extent, Patterns and Trends of Drug Abuse in 2004. Several models of clinical care have been developed for population subgroups in diverse settings. The centre played an important role in producing data and resource material which helped to scale up opioid substitution treatment in India. A nationwide database on the profile of patients seeking treatment (Drug Abuse Monitoring System) at government drug treatment centres has also been created. The centre has provided valuable inputs for the Government of India's programme planning. Besides clinical studies, research has also focused on pre-clinical studies. Capacity-building is an important priority, with training curricula and resource material being developed for doctors and paramedical staff. Many of these training programmes are conducted in collaboration with other institutions in the country. The NDDTC has received funding from several national and international organizations for research and scientific meetings, and, most recently (2012), it has been designated as a World Health Organization Collaborating Centre on Substance Abuse. © 2012 The Authors, Addiction © 2012 Society for the Study of Addiction.

  12. Interaction of centres on nucleate boiling

    International Nuclear Information System (INIS)

    Chekanov, V.V.

    1977-01-01

    An experimental set-up is described which enables to analyse the growth of a bubble on a heater, the frequency of succession of the bubbles, etc., by the change in the electric signal from a photomultiplier, onto whose photocathode the bubble is projected. The change in the first moments of the statistical distribution of the corresponding parameters (growth time, frequency of succession, and so on) is adopted as the measure of the external effect on the vapour formation centre. It is shown that for single-bubble boiling the greatest effect is exerted by the acoustic waves produced by the bubble in the growth period; during developed boiling one observes mutual suppression of centres spaced at a distance of the order of the detachment diameter. As the heat flux increases, the correlation of the motion of the interface over the heater surface increases as well. When the correlation radius becomes equal to the centre-to-centre distance, the first crisis sets in. It is suggested that heaters with a variable coefficient of temperature conductance along the heat-releasing surface must withstand high subcritical heat fluxes

  13. Official Centre Hospitality

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sylvain Dufour

    Approved by the Management Executive Committee. - 1 -. Version 3.1.0 effective 2017-06-28. Official Centre Hospitality. 1. Objective. 2. Application. 3. Definitions. 4. Roles and Responsibilities. 5. Authorization. 6. Consultants and Contractors. 7. Reimbursement. 1. Objective. To define the circumstances under which ...

  14. Role of centre vortices in dynamical mass generation

    International Nuclear Information System (INIS)

    Leinweber, Derek B.; Bowman, Patrick O.; Heller, Urs M.; Kusterer, Daniel-Jens; Langfeld, Kurt; Williams, Anthony G.

    2006-01-01

    The mass and renormalization functions of the nonperturbative quark propagator are studied in SU(3) gauge field theory with a Symanzik-improved gluon action and the AsqTad fermion action. Centre vortices in the gauge field are identified by fixing to maximal centre gauge. The role of centre vortices in dynamical mass generation is explored by removing centre vortices from the gauge fields and studying the associated changes in the quark propagator. We find that dynamical mass generation survives in the vortex-removed SU(3) gauge field theory despite the vanishing of the string tension and suppression of the gluon propagator in the infrared suggesting the possibility of decoupling dynamical mass generation from confinement

  15. Reducing cooling energy consumption in data centres and critical facilities

    Science.gov (United States)

    Cross, Gareth

    Given the rise of our everyday reliance on computers in all walks of life, from checking the train times to paying our credit card bills online, the need for computational power is ever increasing. Other than the ever-increasing performance of home Personal Computers (PC's) this reliance has given rise to a new phenomenon in the last 10 years ago. The data centre. Data centres contain vast arrays of IT cabinets loaded with servers that perform millions of computational equations every second. It is these data centres that allow us to continue with our reliance on the internet and the PC. As more and more data centres become necessary due to the increase in computing processing power required for the everyday activities we all take for granted so the energy consumed by these data centres rises. Not only are more and more data centres being constructed daily, but operators are also looking at ways to squeeze more processing from their existing data centres. This in turn leads to greater heat outputs and therefore requires more cooling. Cooling data centres requires a sizeable energy input, indeed to many megawatts per data centre site. Given the large amounts of money dependant on the successful operation of data centres, in particular for data centres operated by financial institutions, the onus is predominantly on ensuring the data centres operate with no technical glitches rather than in an energy conscious fashion. This report aims to investigate the ways and means of reducing energy consumption within data centres without compromising the technology the data centres are designed to house. As well as discussing the individual merits of the technologies and their implementation technical calculations will be undertaken where necessary to determine the levels of energy saving, if any, from each proposal. To enable comparison between each proposal any design calculations within this report will be undertaken against a notional data facility. This data facility will

  16. Australian International Food Security Research Centre | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Australian International Food Security Research Centre. Australian International Food Security Research Centre. http://aciar.gov.au/AIFSC. Cultivate Africa's Future. The Cultivate Africa's Future research partnership is designed to support applied research to combat hunger in sub-Saharan Africa by harnessing the potential ...

  17. Building an applied activation analysis centre

    International Nuclear Information System (INIS)

    Bartosek, J.; Kasparec, I.; Masek, J.

    1972-01-01

    Requirements are defined and all available background material is reported and discussed for the building up of a centre of applied activation analysis in Czechoslovakia. A detailed analysis of potential users and the centre's envisaged availability is also presented as part of the submitted study. A brief economic analysis is annexed. The study covers the situation up to the end of 1972. (J.K.)

  18. Nuclear Power Plant Temelin Technical Support Centre

    International Nuclear Information System (INIS)

    Krizek, K.

    2000-01-01

    The erection of the Technical Support Centre for the Nuclear Power Plant Temelin has been a relatively sophisticated and costly issue. It was by proper use of the existing systems, as e.g. I and C, ISE and other systems, that a robust system has been created that is able to meet any requirements laid on the performance of the Technical Support Centre. The decision of the utility CEZ, a.s. that made it possible to establish the Technical Support Centre at the Nuclear Power Plant Temelin has been a right step which shows the level of safety culture within the utility. (author)

  19. EPR of VHal centres in SrS

    International Nuclear Information System (INIS)

    Seeman, V.; Danilkin, M.; Must, M.; Ots, A.; Paernoja, E.; Pung, L.; Tarkpea, K.

    2006-01-01

    V Hal centres were studied by EPR in SrS doped with halogens after X-raying the samples at 77 K. V Hal centre arises when a hole is captured by sulphide-ion next to a cation vacancy with a halogen ion substituting the opposite sulphide-ion. EPR parameters and thermal decay characteristics are measured for V Cl , V Br , and V I centres. The efficiency of different halogens to produce and stabilise cation vacancies is shown to vary for different alkaline earth sulphides. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  20. Associating science and development - the Trieste Centre

    International Nuclear Information System (INIS)

    Hamende, A.

    1982-01-01

    The International Centre for Theoretical Physics, located in Trieste, Italy, is supported by income from the Italian Government, from UNESCO and from the IAEA. The Centre organizes research sessions, workshops and extended courses on advanced topics in the physical and mathematical sciences and encourages scientists, especially from developing countries, to visit the ICTP for extended periods. With the aim of facilitating the transfer of knowledge to scientists from developing countries, the Centre's current scientific programme is divided up into five major disciplines: physics and energy; physics and frontiers of knowledge; physics and technology; physics and the environment and natural resources; applicable mathematics

  1. Conceptual design and equipment of visitor centres

    International Nuclear Information System (INIS)

    Huettinger, K.

    1993-01-01

    Discussing the needs to be met by a visitor centre, the author develops the strategies to be adopted and defines the items to be included in the information program. The procedure in preparing the layout and design are explained and the media available to provide various levels of information are listed. Principles of selecting and mixing the media are discussed and the functions of the various sections of the centre described. Also included are examples of the costs and time requirements for the establishment of a typical centre. The importance of regular maintenance and updating is emphasized. (author)

  2. Tele-centres as a way of achieving universal access

    DEFF Research Database (Denmark)

    Falch, Morten; Anyimadu, Amos

    2003-01-01

    The success of tele-centres in Ghana is discussed. The tele-centres offer a low cost opportunity to empower local communities in developed and developing countries to meet the challenges of the information society. The tele-centres can also contribute more directly to the supply of non-commercial...

  3. Electronic ignition system for internal combustion engines

    Energy Technology Data Exchange (ETDEWEB)

    Crowder, L W

    1980-11-20

    Mechanical ignition adjustment devices are sensitive to many effects, for example breakage, faults due to manufacturing tolerances, play in the linkage and the effect of a dirty or corrosive environment. It is therefore the purpose of the invention to provide an electronic ignition system which avoids the disadvantages of a mechanical system. The invention provides adjustment of the ignition point, which gives advance of the ignition timing with increasing speed. An output signal is formed, which supersedes the signal supplied by the electronic control system, so that the ignition is advanced. This also occurs with a larger crankshaft angle before top dead centre of the engine. The electronic control system combines with a source of AC time signals which has a generator as electrical transmitter and a DC battery and ignition coil. The rotor of the electrical generator is driven synchronised with the engine. Structural and functional details of the transistor control circuits are given in 5 patent claims.

  4. Commission of the european communities. Joint research centre. Petten Establishment. Annual Report 1977

    International Nuclear Information System (INIS)

    1977 marked the beginning of a new multiannual research programme for the European Commission's Joint research Centre. Regarding the exploitation of HFR (High Flux Reactor), the year was one of steady, on-schedule operation with high utilization, although this fell off slightly in the autumn due to overloading of our capsule project engineering team and manufacturing services. We are pleased to note that the HFR Users' Meeting, held in October, drew about 100 participants from Europe and America and demonstrated a lively interest in the Commission's materials testing reactor. Technical improvements to the plant are being examined as one means of maintaining or even increasing this interest in the 1980's. Following the wishes of the Council of Ministers, new Advisory Committees for Programme Management have been set up for all the Joint Research Centre's activities and those for HFR and High Temperature Materials Programmes have met at Petten. This latter Committee is entirely new to its task, the programme having been served until 1977 by a number of ad hoc meetings of national experts. The work of the Organic Chemistry Laboratory falls under the wings of the Community Reference Bureau Advisory Committee, who have met in Brussels and strongly encouraged the development of the activity

  5. Need and feasibility of telemedicine in non-urban day care centres.

    Science.gov (United States)

    Setia, Monika; DelliFraine, Jami L

    2010-01-01

    There appear to have been no studies of telemedicine in rural day care centres. We have assessed the feasibility of using telemedicine in eight rural day care centres in Pennsylvania, from the day care centres' perspective. The average number of children in these centres was 76 (range 20-150). The centres sent an average of 4.7 children home each month because of illness. Using telephone and face-to-face interviews, we assessed their perceived need for and familiarity with telemedicine, as well as their openness and preparedness for implementing telemedicine. Most day care centres reported a need for telemedicine and were open to learning how to use it. Some centres were concerned about adequate space for the equipment, but overall, the centres felt that their resources were adequate. Telemedicine in rural day care centres appears to be feasible, and would have the potential to save time and money for parents, as well as perhaps improving health care for children in rural areas.

  6. Northern blotting analysis

    DEFF Research Database (Denmark)

    Josefsen, Knud; Nielsen, Henrik

    2011-01-01

    Northern blotting analysis is a classical method for analysis of the size and steady-state level of a specific RNA in a complex sample. In short, the RNA is size-fractionated by gel electrophoresis and transferred by blotting onto a membrane to which the RNA is covalently bound. Then, the membrane...... is analysed by hybridization to one or more specific probes that are labelled for subsequent detection. Northern blotting is relatively simple to perform, inexpensive, and not plagued by artefacts. Recent developments of hybridization membranes and buffers have resulted in increased sensitivity closing...

  7. Treatment of effluent at the Saclay Centre d'Etudes Nucleaires (1960); Le traitement des effluents du Centre d'Etudes Nucleaires de Saclay (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The Centre d'Etudes Nucleaires at Saclay possesses several installations from which liquid radioactive effluent is rejected, and it has thus been found necessary to construct a station for the purification of radioactive liquids and to settle various chemical, analytical and technological problems. This report describes, in the following order: - the disposal possibilities at the Centre d'Etudes Nucleaires, Saclay, - the effluents produced at the centre, - the set-up for collecting effluent, - treatment of the effluent, - results of these treatments. (author) [French] La presence, au Centre d'Etudes Nucleaires de Saclay, de plusieurs installations susceptibles de rejeter des effluents liquides radioactifs a necessite la construction d'une station d'epuration d'eaux radioactives et la mise au point de differents problemes chimiques, analytiques et technologiques. Dans ce rapport, nous exposerons successivement: - les possibilites de rejet du Centre d'Etudes Nucleaires de Saclay, - les effluents du centre, - le dispositif de collecte des effluents, - le traitement de ces effluents, - les resultats de ces traitements. (auteur)

  8. Psycho-oncological care in certified cancer centres--a nationwide analysis in Germany.

    Science.gov (United States)

    Singer, Susanne; Dieng, Sebastian; Wesselmann, Simone

    2013-06-01

    Over the last few years, a nationwide voluntary certification system for cancer centres has been established in Germany. To qualify for certification, cancer centres must provide psycho-oncological care to every patient who needs it. The aim of this study was to find out how many patients have been treated by a psycho-oncologist in the certified centres. All cancer centres in Germany that were re-certified in 2010 provided data documenting how many patients with primary cancer received at least 30 min of psycho-oncological consultation in 2009. Data from n = 456 certified cancer centres were available. In the centres, a total of 36,165 patients were seen by a psycho-oncologist for at least 30 min, representing 37.3% of all patients in the centres. The highest percentage of patients who received psycho-oncological care was found in breast cancer centres (66.7%), and the lowest in prostate cancer centres (6.8%). Half of the patients (50.0%) in gynaecological cancer centres, 37.7% in colon cancer centres and 25.4% in lung cancer centres received psycho-oncological care. Compared with non-certified centres, the proportion of patients receiving psycho-oncological care in certified cancer centres has increased. Copyright © 2012 John Wiley & Sons, Ltd.

  9. Medical applications of accelerators at Tata Memorial Centre

    International Nuclear Information System (INIS)

    Dinshaw, K.A.

    2003-01-01

    The Tata Memorial Centre constitutes the national comprehensive cancer centre for the prevention, diagnosis, treatment and research on cancer. It is well equipped with sophisticated state-of-the-art equipment capable of delivering External Beam Radiotherapy (Ebert) and Brachytherapy. Nearly 400 patients receive Ebert daily at the institute from a team of highly skilled and dedicated radiation oncologists, medical physicists and technologists, making it one of the busiest centres in the country

  10. Occupational deprivation in an asylum centre:

    DEFF Research Database (Denmark)

    Morville, Anne-Le; Erlandsson, Lena-Karin

    2013-01-01

    This article presents a study of three asylum-seeking men from Iran and Afghanistan. It aimed to explore how and if they experienced occupations as occupations in a Danish asylum centre and how their life experience shaped their choice and value of current occupations. In-depth narrative interviews...... explored the participants’ occupational history and its influence on their occupations in the asylum centre. A thematic analysis showed that the participants had been subjected to occupational disruption and deprivation by politically oppressive systems even before their flight. Their occupations...... in Denmark were to a certain extent influenced by their earlier occupations and the current occupational deprivation they all experienced was due to limited possibilities in the centre. Although they tried their best to fill their days and create structure, there was a loss of valued occupations...

  11. Optimal catchment area and primary PCI centre volume revisited

    DEFF Research Database (Denmark)

    Schoos, Mikkel Malby; Pedersen, Frants; Holmvang, Lene

    2015-01-01

    AIMS: The currently stated optimal catchment population for a pPCI centre is 300,000-1,100,000, resulting in 200-800 procedures/year. pPCI centres are increasing in number even within small geographic areas. We describe the organisation and quality of care after merging two high-volume centres...

  12. Preliminary evaluation of the feasibility of artificial recharge in northern Qater

    Science.gov (United States)

    Vecchioli, John

    1976-01-01

    Fresh ground water in northern Qatar occurs as a lens in limestone and dolomite of Eocene age. Natural recharge from precipitation averages 17x106 cubic metres per year whereas current discharge averages 26.6x106 cubic metres per year. Depletion of storage is accompanied by a deterioration in quality due to encroachment of salty water from the Gulf and from underlying formations. Artificial recharge with desalted sea water to permit additional agricultural development appears technically feasible but its practicability needs to be examined further. A hydrogeological appraisal including test drilling, geophysical logging, pumping tests, and a recharge test, coupled with engineering analysis of direct surface storage/distribution of desalted sea water versus aquifer storage/distribution, is recommended.

  13. Some GCM simulation results on present and possible future climate in northern Europe

    Energy Technology Data Exchange (ETDEWEB)

    Raeisaenen, J [Helsinki Univ. (Finland). Dept. of Meteorology

    1996-12-31

    The Intergovernmental Panel on Climate Change initiated in 1993 a project entitled `Evaluation of Regional Climate Simulations`. The two basic aims of this project were to assess the skill of current general circulation models (GCMs) in simulating present climate at a regional level and to intercompare the regional response of various GCMs to increased greenhouse gas concentrations. The public data base established for the comparison included simulation results from several modelling centres, but most of the data were available in the form of time-averaged seasonal means only, and important quantities like precipitation were totally lacking in many cases. This presentation summarizes the intercomparison results for surface air temperature and sea level pressure in northern Europe. The quality of the control simulations and the response of the models to increased CO{sub 2} are addressed in both winter (December-February) and summer (June-August)

  14. Some GCM simulation results on present and possible future climate in northern Europe

    Energy Technology Data Exchange (ETDEWEB)

    Raeisaenen, J. [Helsinki Univ. (Finland). Dept. of Meteorology

    1995-12-31

    The Intergovernmental Panel on Climate Change initiated in 1993 a project entitled `Evaluation of Regional Climate Simulations`. The two basic aims of this project were to assess the skill of current general circulation models (GCMs) in simulating present climate at a regional level and to intercompare the regional response of various GCMs to increased greenhouse gas concentrations. The public data base established for the comparison included simulation results from several modelling centres, but most of the data were available in the form of time-averaged seasonal means only, and important quantities like precipitation were totally lacking in many cases. This presentation summarizes the intercomparison results for surface air temperature and sea level pressure in northern Europe. The quality of the control simulations and the response of the models to increased CO{sub 2} are addressed in both winter (December-February) and summer (June-August)

  15. Empowerment, patient centred care and self-management.

    Science.gov (United States)

    Pulvirenti, Mariastella; McMillan, John; Lawn, Sharon

    2014-06-01

    Patient or person centred care is widely accepted as the philosophy and practice that underpins quality care. An examination of the Australian National Chronic Disease Strategy and literature in the field highlights assumptions about the self-manager as patient and a focus on clinical settings. This paper considers patient or person centred care in the light of empowerment as it is understood in the health promotion charters first established in Alma Ata in 1977. We argue that patient or person centred care can be reconfigured within a social justice and rights framework and that doing so supports the creation of conditions for well-being in the broader context, one that impacts strongly on individuals. These arguments have broader implications for the practice of patient centred care as it occurs between patient and health professional and for creating shared responsibility for management of the self. It also has implications for those who manage their health outside of the health sector. © 2011 John Wiley & Sons Ltd.

  16. Fabrication of single optical centres in diamond-a review

    International Nuclear Information System (INIS)

    Orwa, J.O.; Greentree, A.D.; Aharonovich, I.; Alves, A.D.C.; Van Donkelaar, J.; Stacey, A.; Prawer, S.

    2010-01-01

    Colour centres in diamond are rapidly becoming one of the leading platforms for solid-state quantum information processing applications. This is due in large part to the remarkable properties of the nitrogen-vacancy colour centre. From initial demonstrations of room-temperature single photon generation and spin single spin readout and quantum control, diamond nanocrystals are also finding application in magnetometry and biosensing. This review discusses the state of the art in the creation of isolated and small ensembles of optically active diamond defect centres, including nitrogen and nickel-related centres.

  17. Family-Centred Care in Paediatric and Neonatal Nursing- A Literature Review

    Directory of Open Access Journals (Sweden)

    L.K. Irlam

    2002-09-01

    Full Text Available A literature review of family-centred care in paediatric and neonatal nursing was undertaken as part of a research project. This research intended to ascertain the knowledge and attitudes of paediatric and neonatal qualified nurses and nurse educators towards family-centred care as it pertains to infants and children in hospitals in the Gauteng Province. A definition of family-centred care is difficult to formulate mainly due to the lack of consensus about its meaning. Additionally, the diverse societal contexts within which family-centred care is applied further complicate its definition. Internationally in developed countries, family-centred care is viewed as care, which is parent-led in consultation with the nurse practitioner. A family-centred care model for the South African context needs to be developed with the focus on parent participation, a precursor of family-centred care. This article traces the early developments in parental care for hospitalised children with specific reference to the USA, the UK and South Africa. Precursor concepts in family-centred care are described followed by a cursory overview of the reality of family-centred care, its cultural dimensions and matters of family strengths and choices in family-centred care.

  18. Northern Eurasia Future Initiative (NEFI)

    DEFF Research Database (Denmark)

    Groisman, Pavel; Shugart, Herman; Kicklighter, David

    2017-01-01

    . The Northern Eurasia Future Initiative (NEFI) has been designed as an essential continuation of the Northern Eurasia Earth Science Partnership Initiative (NEESPI), which was launched in 2004. NEESPI sought to elucidate all aspects of ongoing environmental change, to inform societies and, thus, to better...

  19. An assessment of the visibility of MeSH-indexed medical web catalogs through search engines.

    Science.gov (United States)

    Zweigenbaum, P; Darmoni, S J; Grabar, N; Douyère, M; Benichou, J

    2002-01-01

    Manually indexed Internet health catalogs such as CliniWeb or CISMeF provide resources for retrieving high-quality health information. Users of these quality-controlled subject gateways are most often referred to them by general search engines such as Google, AltaVista, etc. This raises several questions, among which the following: what is the relative visibility of medical Internet catalogs through search engines? This study addresses this issue by measuring and comparing the visibility of six major, MeSH-indexed health catalogs through four different search engines (AltaVista, Google, Lycos, Northern Light) in two languages (English and French). Over half a million queries were sent to the search engines; for most of these search engines, according to our measures at the time the queries were sent, the most visible catalog for English MeSH terms was CliniWeb and the most visible one for French MeSH terms was CISMeF.

  20. VII International Congress of Engineering Physics

    Science.gov (United States)

    2015-01-01

    In the frame of the fortieth anniversary celebration of the Universidad Autónoma Metropolitana and the Physics Engineering career, the Division of Basic Science and Engineering and its Departments organized the "VII International Congress of Physics Engineering". The Congress was held from 24 to 28 November 2014 in Mexico City, Mexico. This congress is the first of its type in Latin America, and because of its international character, it gathers experts on physics engineering from Mexico and all over the globe. Since 1999, this event has shown research, articles, projects, technological developments and vanguard scientists. These activities aim to spread, promote, and share the knowledge of Physics Engineering. The topics of the Congress were: • Renewable energies engineering • Materials technology • Nanotechnology • Medical physics • Educational physics engineering • Nuclear engineering • High precision instrumentation • Atmospheric physics • Optical engineering • Physics history • Acoustics This event integrates lectures on top trending topics with pre-congress workshops, which are given by recognized scientists with an outstanding academic record. The lectures and workshops allow the exchange of experiences, and create and strengthen research networks. The Congress also encourages professional mobility among all universities and research centres from all countries. CIIF2014 Organizing and Editorial Committee Dr. Ernesto Rodrigo Vázquez Cerón Universidad Autónoma Metropolitana - Azcapotzalco ervc@correo.azc.uam.mx Dr. Luis Enrique Noreña Franco Universidad Autónoma Metropolitana - Azcapotzalco lnf@correo.azc.uam.mx Dr. Alberto Rubio Ponce Universidad Autónoma Metropolitana - Azcapotzalco arp@correo.azc.uam.mx Dr. Óscar Olvera Neria Universidad Autónoma Metropolitana - Azcapotzalco oon@correo.azc.uam.mx Professor Jaime Granados Samaniego Universidad Autónoma Metropolitana - Azcapotzalco jgs@correo.azc.uam.mx Dr. Roberto Tito Hern

  1. Multi-technology control centre to integrate 460 MW renewables

    International Nuclear Information System (INIS)

    2016-01-01

    The new RWE Innogy Aersa Control Centre that has been certified to act as an interface with CECRE (the Renewable Energy Control Centre) since February 2015, connects RWE’s 20 renewable energy facilities with REE, the Spanish Electricity Grid. As a result, it ensures that wind farms, in addition to hydropower and solar plants, can inject the energy generated by its 460 MW installed safely and with no penalties. Green Eagle Solutions, a provider of software solutions for renewable energy companies, has collaborated with RWE in the development of this Control Centre, meeting the high standards of quality and safety required by RWE. This centre uses CompactSCADA® technology to integrate power generation facilities that need to be integrated in a Control Centre to communicate with REE’s CECRE. (Author)

  2. The Future of Leisure Time Centres in Decin

    OpenAIRE

    Hochwalderová, Světluše

    2014-01-01

    This Bachelor thesis deals with the issue of extracurricular education in Decin. The goal of the thesis is to find out whether the conditions for providing extracurricular education in leisure time centres and basic schools can influence the future of leisure time centres. Another goal of the thesis is to map and analyse the offer ot extracurricular activities in leisrue time centres and basic schools. The theoretical part is based on literature, laws, regulations and available resources. The...

  3. The DIY Digital Medical Centre.

    Science.gov (United States)

    Timmis, James Kenneth; Timmis, Kenneth

    2017-09-01

    Healthcare systems worldwide are confronted with major economic, organizational and logistical challenges. Historic evolution of health care has led to significant healthcare sector fragmentation, resulting in systemic inefficiencies and suboptimal resource exploitation. To attain a sustainable healthcare model, fundamental, system-wide improvements that effectively network, and ensure fulfilment of potential synergies between sectors, and include and facilitate coherent strategic planning and organisation of healthcare infrastructure are needed. Critically, they must be specifically designed to sustainably achieve peak performance within the current policy environment for cost-control, and efficiency and quality improvement for service delivery. We propose creation of a new healthcare cluster, to be embedded in existing healthcare systems. It consists of (i) local 24/7 walk-in virtually autonomous do-it-yourself Digital Medical Centres performing routine diagnosis, monitoring, prevention, treatment and standardized documentation and health outcome assessment/reporting, which are online interfaced with (ii) regional 24/7 eClinician Centres providing on-demand clinical supervision/assistance to Digital Medical Centre patients. Both of these are, in turn, online interfaced with (iii) the National Clinical Informatics Centre, which houses the national patient data centre (cloud) and data analysis units that conduct patient- and population-level, personalized and predictive(-medicine) intervention optimization analyses. The National Clinical Informatics Centre also interfaces with biomedical research and prioritizes and accelerates the translation of new discoveries into clinical practice. The associated Health Policy Innovation and Evaluation Centre rapidly integrates new findings with health policy/regulatory discussions. This new cluster would synergistically link all health system components in a circular format, enable not only access by all arms of the health

  4. Consumption of added fats and oils in the European Prospective Investigation into Cancer and Nutrition (EPIC) centres across 10 European countries as assessed by 24-hour dietary recalls.

    Science.gov (United States)

    Linseisen, J; Bergström, E; Gafá, L; González, C A; Thiébaut, A; Trichopoulou, A; Tumino, R; Navarro Sánchez, C; Martínez Garcia, C; Mattisson, I; Nilsson, S; Welch, A; Spencer, E A; Overvad, K; Tjønneland, A; Clavel-Chapelon, F; Kesse, E; Miller, A B; Schulz, M; Botsi, K; Naska, A; Sieri, S; Sacerdote, C; Ocké, M C; Peeters, P H M; Skeie, G; Engeset, D; Charrondière, U R; Slimani, N

    2002-12-01

    To evaluate the consumption of added fats and oils across the European centres and countries participating in the European Prospective Investigation into Cancer and Nutrition (EPIC). 24-Hour dietary recalls were collected by means of standardised computer-guided interviews in 27 redefined EPIC centres across 10 European countries. From an initial number of 36 900 subjects, single dietary recalls from 22 924 women and 13 031 men in the age range of 35-74 years were included. Mean daily intake of added fats and oils varied between 16.2 g (Varese, Italy) and 41.1 g (Malmö, Sweden) in women and between 24.7 g (Ragusa, Italy) and 66.0 g (Potsdam, Germany) in men. Total mean lipid intake by consumption of added fats and oils, including those used for sauce preparation, ranged between 18.3 (Norway) and 37.2 g day-1 (Greece) in women and 28.4 (Heidelberg, Germany) and 51.2 g day-1 (Greece) in men. The Mediterranean EPIC centres with high olive oil consumption combined with low animal fat intake contrasted with the central and northern European centres where fewer vegetable oils, more animal fats and a high proportion of margarine were consumed. The consumption of added fats and oils of animal origin was highest in the German EPIC centres, followed by the French. The contribution of added fats and oils to total energy intake ranged from 8% in Norway to 22% in Greece. The results demonstrate a high variation in dietary intake of added fats and oils in EPIC, providing a good opportunity to elucidate the role of dietary fats in cancer aetiology.

  5. The negatively charged nitrogen-vacancy centre in diamond: the electronic solution

    International Nuclear Information System (INIS)

    Doherty, M W; Hollenberg, L C L; Manson, N B; Delaney, P

    2011-01-01

    The negatively charged nitrogen-vacancy centre is a unique defect in diamond that possesses properties highly suited to many applications, including quantum information processing, quantum metrology and biolabelling. Although the unique properties of the centre have been extensively documented and utilized, a detailed understanding of the physics of the centre has not yet been achieved. Indeed, there persist a number of points of contention regarding the electronic structure of the centre, such as the ordering of the dark intermediate singlet states. Without a detailed model of the centre's electronic structure, the understanding of the system's unique dynamical properties cannot effectively progress. In this work, the molecular model of the defect centre is fully developed to provide a self-consistent model of the complete electronic structure of the centre. The application of the model to describe the effects of electric, magnetic and strain interactions, as well as the variation of the centre's fine structure with temperature, provides an invaluable tool to those studying the centre and a means of designing future empirical and ab initio studies of this important defect.

  6. Proposed purchasing, employment and training policies for northern projects

    International Nuclear Information System (INIS)

    1991-09-01

    Manitoba Hydro is about to embark on a major construction project in the northern part of the province. Important considerations involved in this project include purchasing the necessary materials, products, and services, and employing a suitable work force. An outline is presented of draft policies being considered by Manitoba Hydro to enhance northern-aboriginal and northern participation in its future development projects in northern Manitoba. The policies are presented in four sections: purchasing for northern construction and operation activities; training and employment for construction of a generation station and expansion of a converter station; training and employment for construction of a major north-south transmission line; and training and employment for northern operations and maintenance work at existing facilities. Aspects of these policies include giving preference in purchasing to northern and aboriginal businesses, training initiatives and employee counselling for aboriginal employees, and hiring preferences directed toward northern aboriginals and northern residents

  7. Attitude of Farmers towards Kisan Call Centres

    Directory of Open Access Journals (Sweden)

    Shely Mary Koshy

    2017-09-01

    Full Text Available The present study was conducted to measure the attitude of farmers in Kerala, India towards Kisan Call Centre (KCC. Kisan Call Centre provides free agricultural advisory services to every citizen involved in agriculture through a toll free number. One hundred and fifty farmers who have utilized the Kisan Call Centre service were selected from the database of KCC. The results showed that the respondents had moderately favourable attitude towards KCC followed by highly favourable attitude. The variables digital divide, temporal awareness on KCC, satisfaction towards KCC and utilization of KCC were found to have a positive correlation with the attitude of respondents towards KCC.

  8. Welcoming speech from Dean Faculty of Mechanical Engineering, UMP

    Science.gov (United States)

    Taha, Zahari

    2012-09-01

    In the Name of Allah, the Most Beneficent, the Most Merciful. It is with great pleasure that I welcome the participants of the International Conference of Mechanical Engineering Research 2011. The Prophet Muhammad (peace be upon him) said 'Acquire knowledge and impart it to the people.' (Al Tirmidhi). The quest for knowledge has been from the beginning of time but knowledge only becomes valuable when it is disseminated and applied to benefit humankind. It is hoped that ICMER 2011 will be a platform to gather and disseminate the latest knowledge in mechanical engineering. Academicians, Scientist, Researchers and practitioners of mechanical engineering will be able to share and discuss new findings and applications of mechanical engineering. It is envisaged that the intellectual discourse will result in future collaborations between universities, research institutions and industry both locally and internationally. In particular it is expected that focus will be given to issues on environmental and energy sustainability. Researchers in the mechanical engineering faculty at UMP have a keen interest in technology to harness energy from the ocean. Lowering vehicle emissions has been a primary goal of researchers in the mechanical engineering faculty and the automotive engineering centre as well including developing vehicles using alternative fuels such as biodiesel and renewable sources such as solar driven electric vehicles. Finally I would like to congratulate the organizing committee for their tremendous efforts in organizing the conference. As I wrote this in the Holy Land of Makkah, I pray to Allah swt that the conference will be a success. Prof. Dr. Zahari Taha CEng, MIED, FASc Dean, Faculty of Mechanical Engineering Universiti Malaysia Pahang

  9. The EPFL Plasma Physics Research Centre

    International Nuclear Information System (INIS)

    2001-01-01

    The Plasma Physics Research Centre (CRPP) is a non-departmental unit of the EPFL, and currently employs about 130 people, about 105 on the EPFL site and the rest at the Paul Scherrer Institute, PSI, in Villigen, Switzerland. The CRPP is a National Competence Centre in the field of Plasma Physics. In addition to plasma physics teaching, its missions are primarily the pursuit of scientific research in the field of controlled fusion within the framework of the EURATOM-Swiss Confederation Association and the development of its expertise as well as technology transfer in the field of materials research. As the body responsible for all scientific work on controlled fusion in Switzerland, the CRPP plays a national role of international significance. This document of 6 pages presents the explanation of the Plasma Physics Research Centre' activities (CRPP). (author)

  10. Tax haven or international financial centre? The case of Kenya

    OpenAIRE

    Waris, Attiya

    2014-01-01

    International financial centres are geared to provide optimal conditions for the financial services industry. They encourage activities that can improve a country’s economy, but they may also facilitate money laundering, tax evasion, tax avoidance, and other harmful practices. The Nairobi International Financial Centre and similar centres in Africa can foster development, but also pose significant challenges. Legal and regulatory arrangements determine what types of capital a financial centr...

  11. Historical centres: changing definitions

    Directory of Open Access Journals (Sweden)

    Roberta Lazzarotti

    2014-02-01

    Full Text Available Since the end of the Second World War, the architectural and planning culture has been showing a fluctuating attention to the theme of historical centres and their enhancement. First of all this uneven progress explains the difficulty to reach a homogeneous definition and this is still lacking. During a long phase of this period, the historical parts of the town were considered as objects to be preserved in an integral way, as urban monuments. This is mostly due to the high symbolic value of these settlements, that represent fundamental landmarks. Identity building and empowerment of local communities are indispensable conditions for any development programme, especially in the case of centres or other historic environments at risk of abandonment. The progressive evolution of this concept brings awareness of the impossibility of separating – either in analytical or in planning terms ­ historical centres from their urban and territorial contexts, which are linked by mutual, deep relationships. This article attempts to retrace the steps signaled by the publication of international documents and conventions, from the Charter of Gubbio (1960 to the Charter of Krakow and the European Landscape Convention (2000; they obviously represent particular points of view, not exhaustive of the richness of the positions in the debate, but extremely significant in terms of diffusion and consensus.

  12. Crystalline roof glazing - Westside shopping centre, Berne; Kristalline Dachverglasungen

    Energy Technology Data Exchange (ETDEWEB)

    Enkerli, W.

    2009-07-01

    This illustrated article takes a look at the new shopping and leisure centre on the western outskirts of Berne, Switzerland. In particular, the roof of this unusual building over the motorway with its sloping walls and zig-zag design is looked at. The centre's shopping mall, adventure baths and spa, a multiplex cinema, an old peoples' home and a hotel are briefly discussed, as is the embedding of the centre in its suburban environment. The roof construction with its crystalline skylights is examined and discussed in detail. The centre's building technical services are also briefly commented on.

  13. White-centred retinal haemorrhages (Roth spots).

    OpenAIRE

    Ling, R.; James, B.

    1998-01-01

    Roth spots (white-centred retinal haemorrhages) were classically described as septic emboli lodged in the retina of patients with subacute bacterial endocarditis. Indeed many have considered Roth spots pathognomonic for this condition. More recent histological evidence suggests, however, that they are not foci of bacterial abscess. Instead, they are nonspecific and may be found in many other diseases. A review of the histology and the pathogenesis of these white-centred haemorrhages will be p...

  14. Scheduling participants of Assessment Centres

    DEFF Research Database (Denmark)

    Lysgaard, Jens; Løber, Janni

      Assessment Centres are used as a tool for psychologists and coaches to observe a number of dimensions in a person's behaviour and test his/her potential within a number of chosen focus areas. This is done in an intense course, with a number of different exercises which expose each participant...... Centres usually last two days and involve 3-6 psychologists or trained coaches as assessors. An entire course is composed of a number of rounds, with each round having its individual duration. In each round, the participants are divided into a number of groups with prespecifed pairing of group sizes...

  15. New Cyber Policy Centres for the Global South | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 avr. 2018 ... The Cyber Policy Centres initiative was established in 2017 to strengthen independent policy research institutions in sub-Saharan Africa, Asia, and Latin America by providing support and mentorship to build research and policy capacity in the key areas of digital rights, cybersecurity, and innovation policy.

  16. Impact of Flexibility of Manufacturing System Components on Competitiveness of SMEs in Northern India

    Directory of Open Access Journals (Sweden)

    Shakun Preet Kaur

    2016-01-01

    Full Text Available The present manufacturing environment is characterized by a number of changes which poses challenges to a typical manufacturing unit. Time demands a shift from the traditional manufacturing strategies as they do not fit to present market competition. A flexible systems strategy has to be designed for remaining competitive in the market and perform well. For designing strategies and policies it is important to know the factors that influence performance of the system. The aim of this paper is to assess the impact of the flexibility of manufacturing system components on competitiveness of SMEs in northern India. A questionnaire based survey was conducted in the SMEs across northern India analysing three sectors namely automotive, machine tool and light engineering (mechanical components and equipment. The study contributes to the existing literature by empirically investigating the impact of machine, material handling and worker flexibility on competitiveness of manufacturing firms. This paper presents a Structural Equation Model displaying the impact of flexibility of manufacturing system components on competitiveness of SMEs.

  17. Northern Dimension: Participant Strategies

    Directory of Open Access Journals (Sweden)

    Busygina I.

    2009-01-01

    Full Text Available his article is devoted to the “Northern Dimension” initiative of the EU which also includes North-West Russia, Norway and Iceland. It is noted that the “Northern Dimension” in the theoretical perspective can be considered as part of strategic multi-level interactions between member-states of the EU and Russia. On this basis, the authors analyze implications and effects of the strategic interdependence of all the EU-Russia relation levels.

  18. Northern Dimension: Participant Strategies

    Directory of Open Access Journals (Sweden)

    Busygina Irina

    2009-03-01

    Full Text Available This article is devoted to the “Northern Dimension” initiative of the EU which also includes North-West Russia, Norway and Iceland. It is noted that the “Northern Dimension” in the theoretical perspective can be considered as part of strategic multi-level interactions between member-states of the EU and Russia. On this basis, the authors analyze implications and effects of the strategic interdependence of all the EU-Russia relation levels.

  19. Adjoint administratif (h/f) - Politiques et planification | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    à‑d. les informer au sujet des programmes et des procédures du Centre, des systèmes et des programmes informatiques, organiser des rendez-vous avec des membres clés du personnel du Centre, réacheminer les questions aux personnes-ressources compétentes au Centre, et organiser la création de comptes de ...

  20. The negatively charged nitrogen-vacancy centre in diamond: the electronic solution

    Energy Technology Data Exchange (ETDEWEB)

    Doherty, M W; Hollenberg, L C L [School of Physics, University of Melbourne, Melbourne, Victoria 3010 (Australia); Manson, N B [Laser Physics Centre, Research School of Physics and Engineering, Australian National University, Canberra, Australian Capital Territory 0200 (Australia); Delaney, P, E-mail: marcuswd@unimelb.edu.au [School of Mathematics and Physics, Queen' s University Belfast, Belfast BT7 1NN (United Kingdom)

    2011-02-15

    The negatively charged nitrogen-vacancy centre is a unique defect in diamond that possesses properties highly suited to many applications, including quantum information processing, quantum metrology and biolabelling. Although the unique properties of the centre have been extensively documented and utilized, a detailed understanding of the physics of the centre has not yet been achieved. Indeed, there persist a number of points of contention regarding the electronic structure of the centre, such as the ordering of the dark intermediate singlet states. Without a detailed model of the centre's electronic structure, the understanding of the system's unique dynamical properties cannot effectively progress. In this work, the molecular model of the defect centre is fully developed to provide a self-consistent model of the complete electronic structure of the centre. The application of the model to describe the effects of electric, magnetic and strain interactions, as well as the variation of the centre's fine structure with temperature, provides an invaluable tool to those studying the centre and a means of designing future empirical and ab initio studies of this important defect.

  1. Low-Centred Polygons and Alas-Like Basins as Geological Markers of Warming Trends Late in Mars' History

    Science.gov (United States)

    Soare, R. J.; Conway, S. J.; Godin, E.; Osinski, G.; Hawkswell, J.; Bina, A.

    2017-12-01

    Expansive assemblages of low/high centred (ice-wedge) polygons and (polygonised) flat-floored thermokarst-basins (alases) are ubiquitous on Earth where the permafrost is continuous, metres to decametres-thick and ice rich, i.e. the Tuktoyaktuk Coastlands of northern Canada and the Yamal Peninsula of eastern Russia. These assemblages are geological bellwethers of transient and on occasion, long-term rises of sub-aerial and thaw-generating mean temperatures, for two principal reasons. First, high-centred (ice-wedge) polygons evolve from low-centred (ice-wedge) polygons when ice wedges that have aggraded and uplift overlying sediments above the elevation datum at the polygon centres, degrade, by thaw, and induce the loss of elevation below that datum. Second, thermokarst terrain comprises sediments whose pore volume is exceeded by the presence of water ice. A thermokarst basin (an alas) forms if and only when this ice undergoes thermal destabilisation and where thaw-generated meltwater is lost by evaporation or drainage. Spatially-associated and morphologically-similar assemblages of polygons and basins are commonplace throughout the mid-latitudes of eastern Utopia Planitia (UP), Mars. Under current conditions of extreme aridity, low atmospheric-pressure and frigid mean-temperatures, the widespread formation of ice-rich terrain by freeze-thaw cycling, let alone of near-surface ice-wedges and/or thermokarst basins, seems implausible. Against this environmental backdrop, sublimation seemingly stands alone in being able to revise ice-rich landscapes. However, multiple strands of data point to the possible periglacial-assemblages (PPAs) being youthful but not current in their formation. First, the sub-regional and dark-toned terrain incised by the PPAs is cratered more densely than would be expected. Second, the PPAs reside at a lower relative and absolute elevation than a light-toned and region-wide latitude-dependent mantle that is generally thought to be very recent in

  2. Information Centre Radioactivity Switzerland; Beratungsstelle Radioaktivitaet Schweiz

    Energy Technology Data Exchange (ETDEWEB)

    Mosimann, N.; Balsiger, B.; Burger, M. [Bundesamt fuer Bevoelkerungsschutz (Switzerland). LABOR SPIEZ

    2016-07-01

    The Information Centre Radioactivity Switzerland is meant to assess the radiological condition and serves for psychological-medical care of affected members of the Swiss public following an event of increased radioactivity in the environment. The Centre is structured in a modular way consisting of the following modules: ''Entry Measurement'': The visitors are registered and measured for contamination, ''Decontamination'': Contaminated visitors are decontaminated, ''Additional Measurements'': If required, thyroid and whole body measurements are performed, ''Information'': The visitors are informed about radioactivity, radiation protection, the current situation and their individual next steps, ''Exit'': Administrative release from the Information Centre.

  3. Contribution of lifetime smoking habit in France and Northern Ireland to country and socioeconomic differentials in mortality and cardiovascular incidence: the PRIME Study.

    Science.gov (United States)

    Yarnell, J W G; Patterson, C C; Arveiler, D; Amouyel, P; Ferrières, J; Woodside, J V; Haas, B; Montaye, M; Ruidavets, J B; Kee, F; Evans, A; Bingham, A; Ducimetière, P

    2012-07-01

    This study examines the contribution of lifetime smoking habit to the socioeconomic gradient in all-cause and smoking-related mortality and in cardiovascular incidence in two countries. 10,600 men aged 50-59 years were examined in 1991-4 in centres in Northern Ireland and France and followed annually for 10 years. Deaths and cardiovascular events were documented. Current smoking habit, lifetime smoking (pack-years) and other health behaviours were evaluated at baseline. As socio-occupational coding schemes differ between the countries seven proxy socioeconomic indicators were used. Lifetime smoking habit showed marked associations with most socioeconomic indicators in both countries, but lifetime smoking was more than 10 pack-years greater overall in Northern Ireland and smoking patterns differed. Total mortality was 49% higher in Northern Ireland than in France, and smoking-related mortality and cardiovascular incidence were 93% and 92% higher, respectively. Both lifetime smoking and fibrinogen contributed independently to these differentials, but together explained only 42% of the difference in total mortality between countries, adjusted for both biological and lifestyle confounders. Socioeconomic gradients were steeper for total and smoking-related mortality than for cardiovascular incidence. Residual contributions of lifetime smoking habit ranged from 6% to 34% for the seven proxy indicators of socioeconomic position for total and smoking-related mortality. Socioeconomic gradients in cardiovascular incidence were minimal following adjustment for confounders. In Northern Ireland and France lifetime smoking appeared to explain a significant part of the gradients in total and smoking-related mortality between socioeconomic groups, but the contribution of smoking was generally small for cardiovascular incidence.

  4. Automatic centring and bonding of lenses

    Science.gov (United States)

    Krey, Stefan; Heinisch, J.; Dumitrescu, E.

    2007-05-01

    We present an automatic bonding station which is able to center and bond individual lenses or doublets to a barrel with sub micron centring accuracy. The complete manufacturing cycle includes the glue dispensing and UV curing. During the process the state of centring is continuously controlled by the vision software, and the final result is recorded to a file for process statistics. Simple pass or fail results are displayed to the operator at the end of the process.

  5. Ideologies of sexuality, menstruation and risk: girls' experiences of puberty and schooling in northern Tanzania.

    Science.gov (United States)

    Sommer, Marni

    2009-05-01

    This paper examines girls' voiced experiences of menstruation, puberty and schooling in northern Tanzania. The study was conducted in Moshi and Rombo Districts of Kilimanjaro, a predominantly Chagga region with historically strong support for girls' education. The major question explored was how the onset of menses and puberty may be impacting on girls' school participation, given societal implications of pubertal onset and potentially gender discriminatory school environments. The methodology included a comparative case study using in-depth interviews and participatory research with young women living in urban and rural Kilimanjaro. Along with important findings about how menstrual onset creates challenges for girls attending school emerged findings about the significant gaps in girls' knowledge about body changes, sexual health and HIV/AIDS. These findings underline the importance of identifying new girl-centred approaches to guidance on bodily development and HIV prevention.

  6. F-centre luminescence in nanocrystalline CeO2

    International Nuclear Information System (INIS)

    Aškrabić, S; Dohčević-Mitrović, Z D; Araújo, V D; Ionita, G; De Lima, M M Jr; Cantarero, A

    2013-01-01

    Nanocrystalline CeO 2 powders were synthesized by two cost-effective methods: the self-propagating room temperature (SPRT) method and the precipitation method. Differently prepared samples exhibited different temperature-dependent photoluminescence (PL) in the ultraviolet and visible regions. The PL signals originated from different kinds of oxygen-deficient defect centres with or without trapped electrons (F 0 , F + or F ++ centres). The temperature-dependent PL spectra were measured using different excitation lines, below (457, 488 and 514 nm) or comparable (325 nm) to the ceria optical band gap energy, in order to investigate the positions of intragap localized defect states. Evidence for the presence of F + centres was supported by the signals observed in electron paramagnetic resonance (EPR) measurements. Based on PL and EPR measurements it was shown that F + centres dominate in the CeO 2 sample synthesized by the SPRT method, whereas F 0 centres are the major defects in the CeO 2 sample synthesized by the precipitation method. The luminescence from F ++ states, as shallow trap states, was registered in both samples. Energy level positions of these defect states in the ceria band gap were proposed. (paper)

  7. F-centre luminescence in nanocrystalline CeO2

    Science.gov (United States)

    Aškrabić, S.; Dohčević-Mitrović, Z. D.; Araújo, V. D.; Ionita, G.; de Lima, M. M., Jr.; Cantarero, A.

    2013-12-01

    Nanocrystalline CeO2 powders were synthesized by two cost-effective methods: the self-propagating room temperature (SPRT) method and the precipitation method. Differently prepared samples exhibited different temperature-dependent photoluminescence (PL) in the ultraviolet and visible regions. The PL signals originated from different kinds of oxygen-deficient defect centres with or without trapped electrons (F0, F+ or F++ centres). The temperature-dependent PL spectra were measured using different excitation lines, below (457, 488 and 514 nm) or comparable (325 nm) to the ceria optical band gap energy, in order to investigate the positions of intragap localized defect states. Evidence for the presence of F+ centres was supported by the signals observed in electron paramagnetic resonance (EPR) measurements. Based on PL and EPR measurements it was shown that F+ centres dominate in the CeO2 sample synthesized by the SPRT method, whereas F0 centres are the major defects in the CeO2 sample synthesized by the precipitation method. The luminescence from F++ states, as shallow trap states, was registered in both samples. Energy level positions of these defect states in the ceria band gap were proposed.

  8. The CERN Control Centre is up and running!

    CERN Multimedia

    2006-01-01

    The CERN Control Centre (CCC) that combines all the control rooms for the accelerators, the cryogenic system and the technical infrastructure came into operation on 1st February. This is not a mock-up but the real thing! The CERN Control Centre has been built and put into operation in only 15 months.On 1st February, at 2.00 p.m., Patrick Villeton Pachot started the first Technical Infrastructure shift at the brand new CERN Control Centre. From now on, when you dial 72201 to report a leak or an electrical fault, your call will ring out in the brand new CERN Control Centre. The much anticipated CCC came on line on 1st February, exactly as planned. The 2.00 p.m. shift by the operators of the former Technical Control Room (TCR), now renamed TI for Technical Infrastructure, marked the start of operations at the Centre. The PCR, MCR, TCR and QCR are no more, and all the individual control rooms have been merged into one. And what a control room it is! True to the streamlined image announced when the project was f...

  9. Assessment of ART centres in India: client perspectives.

    Science.gov (United States)

    Sogarwal, Ruchi; Bachani, Damodar

    2009-05-01

    Drug adherence and quality of antiretroviral therapy (ART) services are the keys for the successful ART programme. Hence, an attempt has been made to assess ART centres in India from client perspectives that are receiving services from the centres. Data were gathered through exit interviews with 1366 clients from 27 ART centres that were selected on the basis of drug adherence and client load. Analyses revealed that more than 80 per cent of the clients reported overall satisfaction with the services availed from the centre and 60 per cent reported that the quality of life has improved to a great extent after getting ART. Most of the clients strongly demanded to open ART centre in each district for better access as that will increase drug adherence and eventually control the HIV progression. It has been found that as many as 14% of respondents, ever been on ART, reported non-adherence and 70% of them cited distance and economic factors as the reasons for non-adherence. Study concludes that while majority of the clients were satisfied with ART services, shortage of staff, high level of non-drug adherence, long distances and poor referring system are the weak areas requiring attention.

  10. Rapid health assessments of evacuation centres in areas affected by Typhoon Haiyan

    Directory of Open Access Journals (Sweden)

    Ruth Alma Ramos

    2015-11-01

    Full Text Available Introduction: Typhoon Haiyan caused thousands of deaths and catastrophic destruction, leaving many homeless in Region 8 of the Philippines. A team from the Philippine Field Epidemiology Training Program conducted a rapid health assessment survey of evacuation centres severely affected by Haiyan. Methods: A descriptive study was conducted whereby a convenience sample of evacuation centres were assessed on the number of toilets per evacuee, sanitation, drinking-water, food supply source and medical services. Results: Of the 20 evacuation centres assessed, none had a designated manager. Most were located in schools (70% with the estimated number of evacuees ranging from 15 to 5000 per centre. Only four (20% met the World Health Organization standard for number of toilets per evacuee; none of the large evacuation centres had even half the recommended number of toilets. All of the evacuation centres had available drinking-water. None of the evacuation centres had garbage collection, vector control activities or standby medical teams. Fourteen (70% evacuation centres had onsite vaccination activities for measles, tetanus and polio virus. Many evacuation centres were overcrowded. Conclusion: Evacuation centres are needed in almost every disaster. They should be safely located and equipped with the required amenities. In disaster-prone areas such as the Philippines, schools and community centres should not be designated as evacuation centres unless they are equipped with adequate sanitation services.

  11. Psychiatric rehabilitation in community-based day centres: motivation and satisfaction.

    Science.gov (United States)

    Eklund, Mona; Tjörnstrand, Carina

    2013-11-01

    This study investigated attendees' motivation and motives for participation in day centres and their satisfaction with the rehabilitation, while also addressing the influence of day centre orientation (work- or meeting-place orientation), gender and age. Ninety-three Swedish day centre attendees participated in a cross-sectional study and completed questionnaires about motivation, motives, and satisfaction with the rehabilitation. Data were analysed with non-parametric statistics. The participants were highly motivated for going to the day centre and set clear goals for their rehabilitation. Female gender, but not age, was associated with stronger motivation. The strongest motives for going to the day centre were getting structure to the day and socializing. Attendees at work-oriented day centres more often expressed that they went there to get structure to the day and gain social status. Satisfaction with the rehabilitation was high, and the most common wishes for further opportunities concerned earning money and learning new things. The rehabilitation largely seemed to meet the attendees' needs, but the findings indicated that further developments were desired, such as participation in work on the open market and more work-like occupations in the day centre, accompanied by some kind of remuneration.

  12. Discussion on several geological problems and uranium metallogeny on northern border of northern China block (platform)

    International Nuclear Information System (INIS)

    Chen Hong.

    1987-01-01

    According to the informations from the satellite image and the field investigation the following geological events on the northern border of the Northern China Block are recognized and confirmed, duch as suture zones between blocks, folding-reversed fault zones, back-arc collision zones (faulted zones), transitional zone between platform and geosyncline, magmatic are and the double sturcture composed of NNE trend magmatic active belt and fault-depression belts (basins) of Yenshan-Ximalaya age. On thsee bases the following problems, such as the unique structural environment of uranium mineralization related to abyssal magmatic rocks and Yenshan magmatic active zone (including volcanic belt) on the northern border of the Northern China Block, the metallogenetic modes for urnaium deposits of 'magmatic type' and 'neutralized surface type' in fault-depression zone and the classification of uranium metallogenetic belts and the criteria for such classification are studied and discussed. Several uranium deposits are given for illustrations

  13. Using customer contact centres as relationship marketing instruments

    NARCIS (Netherlands)

    van der Aa, Zanna; Bloemer, Josée; Henseler, Jörg

    2015-01-01

    This article investigates whether, to what extent and how customer contact centres influence customer–firm relationships through customer contact centre quality. The proposed model compiles direct and indirect effects of this form of quality on focal relationship marketing constructs, including

  14. Nuclear research centres - The Egyptian experiment

    International Nuclear Information System (INIS)

    Abdelrazek, I.D.

    2001-01-01

    The Atomic Energy Authority of Egypt has four research centres located at two sites. Its research reactors are devoted to the production of isotopes, neutron beam experiments, activation analysis and materials research. The accelerators are devoted to the production of short lived isotopes for medical applications and materials R and D. Irradiation technology is used for sterilization of medical supplies and food preservation. High level of expertise in those centres is also useful for other developmental activities in Egypt. (author)

  15. Joint Research Centre. Ispra establishment-Italy

    International Nuclear Information System (INIS)

    Angelini, Antonio

    1976-01-01

    A comprehensive review of the work carried out during 1974 and 1975 in the Ispra establishment of the Joint Research Centre is presented. A description of the activity carried out within the context of the running programmes is given. Some of the most relevant scientific and technical achievement are described from the viewpoints of the Scientific Departments of the Centre. The technical and administrative support activities are also presented. A list of publications issued by the Ispra Scientific staff is given

  16. White-centred retinal haemorrhages (Roth spots).

    Science.gov (United States)

    Ling, R; James, B

    1998-10-01

    Roth spots (white-centred retinal haemorrhages) were classically described as septic emboli lodged in the retina of patients with subacute bacterial endocarditis. Indeed many have considered Roth spots pathognomonic for this condition. More recent histological evidence suggests, however, that they are not foci of bacterial abscess. Instead, they are nonspecific and may be found in many other diseases. A review of the histology and the pathogenesis of these white-centred haemorrhages will be provided, along with the work-up of the differential diagnosis.

  17. Family-centred care delivery

    Science.gov (United States)

    Mayo-Bruinsma, Liesha; Hogg, William; Taljaard, Monica; Dahrouge, Simone

    2013-01-01

    Abstract Objective To determine whether models of primary care service delivery differ in their provision of family-centred care (FCC) and to identify practice characteristics associated with FCC. Design Cross-sectional study. Setting Primary care practices in Ontario (ie, 35 salaried community health centres, 35 fee-for-service practices, 32 capitation-based health service organizations, and 35 blended remuneration family health networks) that belong to 4 models of primary care service delivery. Participants A total of 137 practices, 363 providers, and 5144 patients. Main outcome measures Measures of FCC in patient and provider surveys were based on the Primary Care Assessment Tool. Statistical analyses were conducted using linear mixed regression models and generalized estimating equations. Results Patient-reported FCC scores were high and did not vary significantly by primary care model. Larger panel size in a practice was associated with lower odds of patients reporting FCC. Provider-reported FCC scores were significantly higher in community health centres than in family health networks (P = .035). A larger number of nurse practitioners and clinical services on-site were both associated with higher FCC scores, while scores decreased as the number of family physicians in a practice increased and if practices were more rural. Conclusion Based on provider and patient reports, primary care reform strategies that encourage larger practices and more patients per family physician might compromise the provision of FCC, while strategies that encourage multidisciplinary practices and a range of services might increase FCC. PMID:24235195

  18. Non-linear density-dependent effects of an intertidal ecosystem engineer.

    Science.gov (United States)

    Harley, Christopher D G; O'Riley, Jaclyn L

    2011-06-01

    Ecosystem engineering is an important process in a variety of ecosystems. However, the relationship between engineer density and engineering impact remains poorly understood. We used experiments and a mathematical model to examine the role of engineer density in a rocky intertidal community in northern California. In this system, the whelk Nucella ostrina preys on barnacles (Balanus glandula and Chthamalus dalli), leaving empty barnacle tests as a resource (favorable microhabitat) for other species. Field experiments demonstrated that N. ostrina predation increased the availability of empty tests of both barnacle species, reduced the density of the competitively dominant B. glandula, and indirectly increased the density of the competitively inferior C. dalli. Empty barnacle tests altered microhabitat humidity, but not temperature, and presumably provided a refuge from wave action. The herbivorous snail Littorina plena was positively associated with empty test availability in both observational comparisons and experimental manipulations of empty test availability, and L. plena density was elevated in areas with foraging N. ostrina. To explore the effects of variation in N. ostrina predation, we constructed a demographic matrix model for barnacles in which we varied predation intensity. The model predicted that number of available empty tests increases with predation intensity to a point, but declines when predation pressure was strong enough to severely reduce adult barnacle densities. The modeled number of available empty tests therefore peaked at an intermediate level of N. ostrina predation. Non-linear relationships between engineer density and engineer impact may be a generally important attribute of systems in which engineers influence the population dynamics of the species that they manipulate.

  19. Electrically active sodium-related defect centres in silicon

    DEFF Research Database (Denmark)

    Dahl, Espen; Madsbøll, J.; Søiland, A.-K.

    2013-01-01

    Electrically active defect centres related to sodium in silicon have been examined with deep level transient spectroscopy, and their recombination potential analysed with the microwave photoconductive decay technique. In order to investigate the entire silicon band gap for defect centres, both p-...

  20. SSC RIAR is the largest centre of research reactors

    International Nuclear Information System (INIS)

    Kalygin, V.V.

    1997-01-01

    The State Scientific Centre (SSC) ''Research Institute of Atomic Reactors'' (RIAR) is situated 100 km to the south-east from Moscow, in Dimitrovgrad, the Volga Region of the Russian Federation. SSC RIAR is the largest centre of research reactors in Russia. At present there are 5 types of reactor facilities in operation, including two NPP. One of the main tasks the Centre is the investigations on safety increase for power reactors. Broad international connections are available at the Institute. On the basis of the SSC RIAR during 3 years work has been done on the development of the branch training centre (TC) for the training of operation personnel of research and pilot reactors in Russia. (author). 3 tabs

  1. SSC RIAR is the largest centre of research reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kalygin, V V [State Scientific Centre, Research Inst. of Atomic Reactors (Russian Federation)

    1997-10-01

    The State Scientific Centre (SSC) ``Research Institute of Atomic Reactors`` (RIAR) is situated 100 km to the south-east from Moscow, in Dimitrovgrad, the Volga Region of the Russian Federation. SSC RIAR is the largest centre of research reactors in Russia. At present there are 5 types of reactor facilities in operation, including two NPP. One of the main tasks the Centre is the investigations on safety increase for power reactors. Broad international connections are available at the Institute. On the basis of the SSC RIAR during 3 years work has been done on the development of the branch training centre (TC) for the training of operation personnel of research and pilot reactors in Russia. (author). 3 tabs.

  2. Supply Chain Engineering and the Use of a Supporting Knowledge Management Application

    Science.gov (United States)

    Laakmann, Frank

    The future competition in markets will happen between logistics networks and no longer between enterprises. A new approach for supporting the engineering of logistics networks is developed by this research as a part of the Collaborative Research Centre (SFB) 559: "Modeling of Large Networks in Logistics" at the University of Dortmund together with the Fraunhofer-Institute of Material Flow and Logistics founded by Deutsche Forschungsgemeinschaft (DFG). Based on a reference model for logistics processes, the process chain model, a guideline for logistics engineers is developed to manage the different types of design tasks of logistics networks. The technical background of this solution is a collaborative knowledge management application. This paper will introduce how new Internet-based technologies support supply chain design projects.

  3. Unified storage systems for distributed Tier-2 centres

    International Nuclear Information System (INIS)

    Cowan, G A; Stewart, G A; Elwell, A

    2008-01-01

    The start of data taking at the Large Hadron Collider will herald a new era in data volumes and distributed processing in particle physics. Data volumes of hundreds of Terabytes will be shipped to Tier-2 centres for analysis by the LHC experiments using the Worldwide LHC Computing Grid (WLCG). In many countries Tier-2 centres are distributed between a number of institutes, e.g., the geographically spread Tier-2s of GridPP in the UK. This presents a number of challenges for experiments to utilise these centres efficaciously, as CPU and storage resources may be subdivided and exposed in smaller units than the experiment would ideally want to work with. In addition, unhelpful mismatches between storage and CPU at the individual centres may be seen, which make efficient exploitation of a Tier-2's resources difficult. One method of addressing this is to unify the storage across a distributed Tier-2, presenting the centres' aggregated storage as a single system. This greatly simplifies data management for the VO, which then can access a greater amount of data across the Tier-2. However, such an approach will lead to scenarios where analysis jobs on one site's batch system must access data hosted on another site. We investigate this situation using the Glasgow and Edinburgh clusters, which are part of the ScotGrid distributed Tier-2. In particular we look at how to mitigate the problems associated with 'distant' data access and discuss the security implications of having LAN access protocols traverse the WAN between centres

  4. Cost Analysis of Operation Theatre Services at an Apex Tertiary Care Trauma Centre of India.

    Science.gov (United States)

    Siddharth, Vijaydeep; Kumar, Subodh; Vij, Aarti; Gupta, Shakti Kumar

    2015-12-01

    Operating room services are one of the major cost and revenue-generating centres of a hospital. The cost associated with the provisioning of operating department services depends on the resources consumed and the unit costs of those resources. The objective of this study was to calculate the cost of operation theatre services at Jai Prakash Narayan Apex Trauma Centre, AIIMS, New Delhi. The study was carried out at the operation theatre department of Jai Prakash Narayan Apex Trauma Centre (JPNATC), AIIMS from April 2010 to March 2011 after obtaining approval from concerned authorities. This study was observational and descriptive in nature. Traditional (average or gross) costing methodology was used to arrive at the cost for the provisioning of operation theatre (OT) services. Cost was calculated under two heads; as capital and operating cost. Annualised cost of capital assets was calculated according to the methodology prescribed by the World Health Organization and operating costs were taken on actual basis; thereafter, per day cost of OT services was obtained. The average number of surgeries performed in the trauma centre per day is 13. The annual cost of providing operating room services at JPNATC, New Delhi was calculated to be 197,298,704 Indian rupees (INR) (US$ 3,653,679), while the per hour cost was calculated to be INR 22,626.92 (US$ 419). Majority of the expenditures were for human resource (33.63 %) followed by OT capital cost (31.90 %), consumables (29.97 %), engineering maintenance cost (2.55 %), support services operating cost (1.22 %) and support services capital cost (0.73 %). Of the total cost towards the provisioning of OT services, 32.63 % was capital cost while 67.37 % is operating cost. The results of this costing study will help in the future planning of resource allocation within the financial constraints (US$ 1 = INR 54).

  5. Engineering and economic aspects of centalized heating from nuclear boilers

    International Nuclear Information System (INIS)

    Emel'yanov, I.Ya.; Baturov, B.B.; Korytnikov, V.P.; Koryakin, Yu.I.; Chernyaev, V.A.; Kovylyanskij, Ya.A.; Galaktionov, I.V.

    1979-01-01

    Some engineering and economic aspects for deployment of centralized nuclear boilers (NB) in the USSR are considered. Engineering, maintenance and economic features of NB as compared to organic-fuelled boilers and nuclear thermal power plants are discussed. Among major factors governing economic efficiency of NB underlined are oraganic fuel costs, reactor unit power, location relative to heat-consuming centres and capacity factor. It is concluded that NB can be economical for heating large consumers (more than 1500 G kal/hr). At the periphery NB can be competitive already at reactor unit power of several MWth. The development of HTGR type reactor-based nuclear-chemical boilers and lines for heat transport in a chemically bound state (e.g., CH 4 → H 2 +CO 2 +CO → CH 4 ) opens the way for a substantial breakthrow in the centralized NB efficiency

  6. Nitric oxide in a diesel engine. Laser-based detection and interpretation

    International Nuclear Information System (INIS)

    Stoffels, G.G.M.

    1999-01-01

    The main objective of the work described in this thesis is the development of a method to determine the nitric oxide (NO) density with both spatial and temporal resolution during the combustion inside the cylinder of a diesel engine by means of laser diagnostics. As a tool to observe the NO molecules the Laser Induced Fluorescence (LIF) technique is used. This non-intrusive technique allows to detect minority species in combustion with spatial and temporal resolution. The intensity of the fluorescence resulting from the NO molecules, that are excited by the laser radiation is a measure for the amount of NO present in the cylinder of the running engine. The engine used is a one-cylinder, two-stroke, direct injection diesel engine. The engine is made optically accessible by mounting two quartz windows in the cylinder wall through which the laser beam can traverse the combustion chamber. A third window is placed in the centre of the cylinder head and is used to detect the fluorescence. The engine was operated in steady-state, on standard commercial diesel fuel and non-oxygen enriched intake air, in contrast to most other experiments reported in literature. In previously described experiments the research engine was mostly operated in skip-fired mode on a substitute fuel and often extra oxygen was supplied to the intake air. The experiments reported in this thesis have shown that it is possible to observe NO inside the combustion chamber of the two-stroke diesel engine applying the LIF technique. 93 refs

  7. Crossing the borders and the cultural gaps for educating PhDs in software engineering

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Knutas, Antti; Seffah, Ahmed

    2017-01-01

    PhDs and educators. While large universities and research centres have the required expertise and infrastructure to providing a cost-effective training by research as well as covering wide spectrum of software engineering topics, the situation in small universities with limited resources...... is challenging. This is even more difficult for some countries where the discipline of software engineering is totally new, which is the case of emerging countries. This paper describes the Pathways to PhDs project funded by the European Commission. The long-term aim is to support the development, modernization...... and international visibility and excellence of higher education, namely education by research at the PhD level in Europe, while helping partner countries to develop new PhD programs and consolidate existing ones in the field of computing in the area of software engineering. This paper presents the creation...

  8. Operational experience of UNESCO centres for psychosocial rehabilitation

    International Nuclear Information System (INIS)

    Garnets, O.

    2003-01-01

    Community Centres of social and psychological rehabilitation for the population suffered from Chernobyl catastrophe have been created in Ukraine, Russia and Belarus. Objectives assigned to the Community Centres for psychosocial rehabilitation on the affected population were as follows: improving mental health of all age and social groups in the community; encouraging interactions within the community; empowering community members to take control over their lives; developing social responsibility; promoting problem-solving skills. The Community Centres network has developed psychosocial assistance models relevant to post-catastrophe period (aggravated by social and economic crisis) that might be applied to different types of crises in communities

  9. THE JOSEF REGIONAL UNDERGROUND RESEARCH CENTRE (JOSEF URC

    Directory of Open Access Journals (Sweden)

    Dana Pacovská

    2012-07-01

    Full Text Available The Josef Gallery, located in the central Bohemia region of the Czech Republic was first excavated in 1981 as an exploration complex for the potential mining of gold. In 2007, the gallery was substantially reconstructed to house the Josef Underground Educational Facility (Josef UEF, which subsequently became an autonomous workplace under the direction of the Czech Technical University in Prague. At the beginning of 2010, the UEF was renamed the Josef Regional Underground Research Centre (Josef URC which, along with the extensive underground complex, features modern above-ground facilities. One of the most important roles of this research center is to provide practical in-situ instruction in the fields of geotechnical engineering, geology, geochemistry, radiochemistry and radioecology. The training of future experts in this authentic underground setting involves the participation of several other Czech universities and numerous experienced specialists from outside the academic sphere. The IAEA (International Atomic Energy Agency has added the Josef URC to its prestigious list of international training canters involved in the “Training in and Demonstration of Waste Disposal Technologies in Underground Research Facilities – A Network of Centers of Excellence” project.

  10. Tests for qualitative treatment-by-centre interaction using a 'pushback' procedure.

    Science.gov (United States)

    Ciminera, J L; Heyse, J F; Nguyen, H H; Tukey, J W

    1993-06-15

    In multicentre clinical trials using a common protocol, the centres are usually regarded as being a fixed factor, thus allowing any treatment-by-centre interaction to be omitted from the error term for the effect of treatment. However, we feel it necessary to use the treatment-by-centre interaction as the error term if there is substantial evidence that the interaction with centres is qualitative instead of quantitative. To make allowance for the estimated uncertainties of the centre means, we propose choosing a reference value (for example, the median of the ordered array of centre means) and converting the individual centre results into standardized deviations from the reference value. The deviations are then reordered, and the results 'pushed back' by amounts appropriate for the corresponding order statistics in a sample from the relevant distribution. The pushed-back standardized deviations are then restored to the original scale. The appearance of opposite signs among the destandardized values for the various centres is then taken as 'substantial evidence' of qualitative interaction. Procedures are presented using, in any combination: (i) Gaussian, or Student's t-distribution; (ii) order-statistic medians or outward 90 per cent points of the corresponding order statistic distributions; (iii) pooling or grouping and pooling the internally estimated standard deviations of the centre means. The use of the least conservative combination--Student's t, outward 90 per cent points, grouping and pooling--is recommended.

  11. The oral food desensitization in the Italian allergy centres.

    Science.gov (United States)

    Meglio, P; Caminiti, L; Pajno, G B; Dello Iacono, I; Tripodi, S; Verga, M C; Martelli, A

    2015-05-01

    Attempts aimed at inducing food tolerance through oral food desensitization (OFD) for the treatment of IgE-mediated food allergies are increasing. In Italy, a number of allergy centres offer this procedure. To collect information on how these centres are organized, how patients are selected, the methods used to administer OFD and how adverse reactions are managed. A questionnaire was e-mailed to all the Italian allergy centres offering OFD. The survey shows a high degree of variability between centres. A correct diagnosis of food allergy is crucial for selecting patients for OFD. In the Italian allergy centres, oral food challenges are mostly open label (84%), but in 16% of cases they are single-blind (8%) or double-blind (8%). A high proportion of allergy centres (83%) offer OFD to children presenting forms of anaphylaxis triggered by traces--or very low doses--of food allergen. The majority of allergy centres (76%) enroll patients over 3 years of age, with 44% enrolling patients above the age of 5. Not-controlled asthma, unreliability of parents in the management of OFD and/or risk of adverse events, are the main reasons for exclusion from the procedure. Although OFD may sometimes be successful and may be considered a valid alternative to an elimination diet, further randomized controlled trials are needed, in order to clarify some controversial points, such as the characteristics of the child undergoing OFD, and the methods of food preparation and administration. Moreover, further studies should further investigate OFD safety, efficacy and costs.

  12. Spatial aspects of planning logistical centres: The case of the economic centre Feniks in the Posavje Region

    Directory of Open Access Journals (Sweden)

    Jure Zavrtanik

    2009-01-01

    Full Text Available Spatial planning of logistics centres follows specific spatial and infrastructural requirements, conditioned by desired traffic flux and scope. Spatial and environmental limitations of the usual freight handling sites are forcing logistical activities to search for areas that can ensure undisturbed expansion and practically unlimited traffic flows. The consequence of this trend is suburbanisation coupled with all the spatial and environmental effects. Within this framework, set against the awareness of the uniqueness of any particular site, the article points out the significance of a comprehensive and timely spatial and environmental planning of logistical centres. Therefore clear spatial objectives, transparent analytical starting blocks and adequate planning regulation prove to be the imperative in the spatial planning of logistical centres and formulation of the spatial concept. Simultaneously, and with respect to the complexity of spatial developments, the significance of territorial cohesion is emphasised, which is manifested as territorial identity, territorial quality and territorial efficiency.

  13. Modernisation of Radiation Monitoring Room as a Part of Slovenian Emergency Response Centre

    International Nuclear Information System (INIS)

    Sarvari, A.; Mitic, D.

    2003-01-01

    In the year 2002 the Slovenian Nuclear Safety Administration (SNSA) moved to the new premises therefore it had to rearrange some of its rooms for the emergency situation. SNSA does not operate with a dedicated Emergency Response Centre (ERC), instead of it the SNSA has to rearrange the existing rooms in case of an emergency. Modernisation of the equipment, with the help of government of the United Kingdom of Great Britain and Northern Ireland, for the emergency situation was carried out, especially in the monitoring room. The radiation monitoring system, which is placed in the monitoring room, continuously collects, processes and archives the incoming data of exposure to radiation and meteorological parameters on the Slovenian territory (A model national emergency response plan for radiological accidents, IAEA, Vienna, 1993. IAEA-TECDOC-718). In the emergency situation the monitoring room transforms into the room for the Dose Assessment Group (DAG), which is part of ERC (IAEA emergency response network, IAEA, Vienna, 2000, EPR-ERNET (2000)). The modernisation of monitoring room and within the DAG room with new equipment and its purpose is described in this article. Modernisation of the monitoring room and the room for DAG showed to be inevitably needed. Modernisation of the monitoring room has brought the SNSA a sophisticated and reliable system of controlling the external exposure to radiation on the Slovenian territory. The equipment, especially the equipment for the use in the emergency situation, brought novelties for the Dose Assessment Group. The group has now better and easier control of radiation situation in case of an accident. In overall this modernisation has put the Slovenian Nuclear Safety Administration a step forward in having a dedicated Emergency Response Centre, since it does not need to rearrange the room for the Dose Assessment Group. (author)

  14. The CSN's Information Centre: a necessary venture

    International Nuclear Information System (INIS)

    Calvo, A.

    1999-01-01

    Every year, around 10,000 pupils will visit the CSN's Information Centre, an exposition area which was created with the intention of explaining simply but strictly, what radiations are, for what they are used, what risks they hold and how they are controlled. Opened in October, 1998, encouraged by Parliamentary urging, the Centre is a path to CSN Information for citizens to use. (Author)

  15. Optimizing Data Centre Energy and Environmental Costs

    Science.gov (United States)

    Aikema, David Hendrik

    Data centres use an estimated 2% of US electrical power which accounts for much of their total cost of ownership. This consumption continues to grow, further straining power grids attempting to integrate more renewable energy. This dissertation focuses on assessing and reducing data centre environmental and financial costs. Emissions of projects undertaken to lower the data centre environmental footprints can be assessed and the emission reduction projects compared using an ISO-14064-2-compliant greenhouse gas reduction protocol outlined herein. I was closely involved with the development of the protocol. Full lifecycle analysis and verifying that projects exceed business-as-usual expectations are addressed, and a test project is described. Consuming power when it is low cost or when renewable energy is available can be used to reduce the financial and environmental costs of computing. Adaptation based on the power price showed 10--50% potential savings in typical cases, and local renewable energy use could be increased by 10--80%. Allowing a fraction of high-priority tasks to proceed unimpeded still allows significant savings. Power grid operators use mechanisms called ancillary services to address variation and system failures, paying organizations to alter power consumption on request. By bidding to offer these services, data centres may be able to lower their energy costs while reducing their environmental impact. If providing contingency reserves which require only infrequent action, savings of up to 12% were seen in simulations. Greater power cost savings are possible for those ceding more control to the power grid operator. Coordinating multiple data centres adds overhead, and altering at which data centre requests are processed based on changes in the financial or environmental costs of power is likely to increase this overhead. Tests of virtual machine migrations showed that in some cases there was no visible increase in power use while in others power use

  16. Institutional Support: Centre for Economic and Social Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Institutional Support: Centre for Economic and Social Research, Education and Documentation (Burkina Faso). The Centre d'études de documentation et de ... innovations to improve lives and livelihoods. Five world-class research teams are working to develop vaccines for neglected livestock diseases in the Global South.

  17. Agroecology and sustainable food systems: Participatory research to improve food security among HIV-affected households in northern Malawi.

    Science.gov (United States)

    Nyantakyi-Frimpong, Hanson; Mambulu, Faith Nankasa; Bezner Kerr, Rachel; Luginaah, Isaac; Lupafya, Esther

    2016-09-01

    This article shares results from a long-term participatory agroecological research project in northern Malawi. Drawing upon a political ecology of health conceptual framework, the paper explores whether and how participatory agroecological farming can improve food security and nutrition among HIV-affected households. In-depth interviews were conducted with 27 farmers in HIV-affected households in the area near Ekwendeni Trading Centre in northern Malawi. The results show that participatory agroecological farming has a strong potential to meet the food, dietary, labour and income needs of HIV-affected households, whilst helping them to manage natural resources sustainably. As well, the findings reveal that place-based politics, especially gendered power imbalances, are imperative for understanding the human impacts of the HIV/AIDS epidemic. Overall, the study adds valuable insights into the literature on the human-environment dimensions of health. It demonstrates that the onset of disease can radically transform the social relations governing access to and control over resources (e.g., land, labour, and capital), and that these altered social relations in turn affect sustainable disease management. The conclusion highlights how the promotion of sustainable agroecology could help to partly address the socio-ecological challenges associated with HIV/AIDS. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Report of The Science and Engineering Research Council for the year 1989-90

    International Nuclear Information System (INIS)

    1990-01-01

    This twenty-fifth anniversary issue of the Science and Engineering Research Council's (SERC) Annual Report opens by reemphasizing the continuing need to plan research expenditure on a greater than annual basis. Exciting developments in every branch and discipline continue to emerge. This year has seen advances in public relations for SERC with the plans for a science centre on the Royal Observatory, Edinburgh site, and a national essay competition for school children. (UK)

  19. Cooling solutions in an operational data centre: A case study

    International Nuclear Information System (INIS)

    Fakhim, B.; Behnia, M.; Armfield, S.W.; Srinarayana, N.

    2011-01-01

    The rapid growth in data centres - large computing infrastructures containing vast quantities of data processing and storage equipment - has resulted in their consumption of up to 100 times more energy per square metre than office accommodation. The decrease in processing server sizes and the more efficient use of space and server processing are challenging data centre facilities to provide more power and cooling, significantly increasing energy demands. Energy consumption of data centres can be severely and unnecessarily high due to inadequate localised cooling and densely packed server rack layouts. However, as heat dissipation in data centres rises by orders of magnitude, inefficiencies such as air recirculation causing hot spots and flow short-circuiting will have a significant impact on the thermal manageability and energy efficiency of the cooling infrastructure. Therefore, an efficient thermal management of high-powered electronic equipment is a significant challenge for cooling of data centres. To highlight the importance of some of these issues, in this project, an operational data centre has been studied. Field measurements of temperature have been performed. Numerical analysis of flow and temperature fields is conducted in order to evaluate the thermal behaviour of the data centre. A number of undesirable hot spots have been identified. To rectify the problem, a few practical design and remedial solutions to improve the cooling effectiveness have been proposed and examined to allow a reduced air-conditioning power requirement. The findings lead to a better understanding of the cooling issues and the respective proposed solutions allow an improved design for future data centres. - Highlights: → Study of flow and temperature distribution in an operational data centre. → Both field measurements and numerical simulations are conducted. → Numerical simulations are validated by field measurements. → Various modifications to improve the thermal

  20. Politique sociale en Afrique de l'Ouest et du Centre | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Initiative Think tank - Fondation Hewlett. Le CRDI et la Fondation William et Flora Hewlett unissent leurs efforts dans le cadre d'une nouvelle initiative destinée à renforcer les groupes de réflexion et centres de recherche sur les... Voir davantageInitiative Think tank - Fondation Hewlett ...

  1. ATLAS Visitors Centre

    CERN Multimedia

    claudia Marcelloni

    2009-01-01

    ATLAS Visitors Centre has opened its shiny new doors to the public. Officially launched on Monday February 23rd, 2009, the permanent exhibition at Point 1 was conceived as a tour resource for ATLAS guides, and as a way to preserve the public’s opportunity to get a close-up look at the experiment in action when the cavern is sealed.

  2. Between Shame and Lack of Responsibility: The Articulation of Emotions among Female Returnees of Human Trafficking in Northern Vietnam

    Directory of Open Access Journals (Sweden)

    Runa Lazzarino

    2014-11-01

    Full Text Available Drawing on qualitative research conducted with some female residents of a shelter for victims of trafficking located in Lào Cai, an urban centre on the Northern Vietnamese border with China, the intention, in this article, is to explore some of their expressed feelings and emotions. These seem to oscillate between a sense of shame and guilt, and a sense of self-pity and victimization. Such oscillation finds significant correspondence at two broader levels, that of Vietnamese society and of the international ideological discourse of human trafficking, which both present a stigmatizing, yet compassionate, approach to the returnees of trafficking. In this way, the aim is to show how emotions are embedded within socio-political power relations and gender inequalities.

  3. Artificial membrane-binding proteins stimulate oxygenation of stem cells during engineering of large cartilage tissue

    Science.gov (United States)

    Armstrong, James P. K.; Shakur, Rameen; Horne, Joseph P.; Dickinson, Sally C.; Armstrong, Craig T.; Lau, Katherine; Kadiwala, Juned; Lowe, Robert; Seddon, Annela; Mann, Stephen; Anderson, J. L. Ross; Perriman, Adam W.; Hollander, Anthony P.

    2015-06-01

    Restricted oxygen diffusion can result in central cell necrosis in engineered tissue, a problem that is exacerbated when engineering large tissue constructs for clinical application. Here we show that pre-treating human mesenchymal stem cells (hMSCs) with synthetic membrane-active myoglobin-polymer-surfactant complexes can provide a reservoir of oxygen capable of alleviating necrosis at the centre of hyaline cartilage. This is achieved through the development of a new cell functionalization methodology based on polymer-surfactant conjugation, which allows the delivery of functional proteins to the hMSC membrane. This new approach circumvents the need for cell surface engineering using protein chimerization or genetic transfection, and we demonstrate that the surface-modified hMSCs retain their ability to proliferate and to undergo multilineage differentiation. The functionalization technology is facile, versatile and non-disruptive, and in addition to tissue oxygenation, it should have far-reaching application in a host of tissue engineering and cell-based therapies.

  4. The storage of nuclear wastes; General problematic of radioactive waste management; The currently operated ANDRA's storage centres in France; The Aube storage centre (CSA) and the industrial centre for gathering, warehousing and storage (Cires); The Cigeo project - Industrial centre of radioactive waste storage in deep geological layers; From R and D to innovation within the ANDRA

    International Nuclear Information System (INIS)

    Abadie, Pierre-Marie; Tallec, Michele; Legee, Frederic; Krieguer, Jean-Marie; Plas, Frederic

    2016-01-01

    This publication proposes a set of four articles which address various aspects related to the storage of nuclear wastes. The authors respectively propose an overview of the general problematic of nuclear waste management, a detailed description of existing storage sites which are currently operated by the ANDRA with a focus on the Aube storage centre or CSA, and on the industrial centre for gathering, warehousing and storage or Cires (The currently operated ANDRA's storage centres in France - The Aube Storage Centre or CSA, and the Industrial Centre for Regrouping, Warehousing and Storage or CIRES), a comprehensive overview of the current status of the Cigeo project which could become one of the most important technological works in France (The Cigeo project - Industrial centre of radioactive waste storage in deep geological layers), and a presentation showing how the ANDRA is involved in R and D activities and innovation (From R and D to innovation within the ANDRA)

  5. Selecting, engineering and constructing drilling sites at the Geysers geothermal field. Geysers chinetsu ryoiki ni okeru kussaku shikichi no sentei engineering kochiku

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This paper describes some examples of selection, engineering and construction of drilling sites at the Geysers geothermal field in the northern district of California State. Steep landform, thin-layered soil and violent rainfall create unstable conditions bringing about numerous landslide in the field. Selection of a well drilling site appropriate in such conditions is started by analyzing the aerial photographs by technical staff. After site selection, prospecting and soil test are conducted and a working plan in the well site is decided to prepare engineering drawings. In the construction, land preparation, the open-cutting of base-line trench, etc. are carried out. The base-line trench is a large and sufficiently deep one which is open-cut to the front end or the middle of the bottom part of the well plateau. The final construction work is to build a leading casing for interpolating cementing. The well site construction in the Geysers geothermal field is done in consideration of protecting human life, health and properties. 1 fig.

  6. Danish Anaesthesia Allergy Centre - preliminary results

    DEFF Research Database (Denmark)

    Garvey, L H; Roed-Petersen, J; Menné, T

    2001-01-01

    BACKGROUND: Anaphylactoid reactions in anaesthesia are rare and should ideally be investigated in specialist centres. At Gentofte University Hospital, we established such a centre in 1998 as a joint venture between the Departments of Anaesthesiology and Dermatology. We present the methodology...... for chlorhexidine. Only one patient has tested positive to a neuromuscular blocking drug (NMBD) so far. DISCUSSION: Our preliminary results appear to differ in two ways from results usually found in this field. Firstly, only one patient has tested positive for a NMBD and secondly, we have had four patients...

  7. Pickering education centre aids nuclear acceptance

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Activities at the new education centre at Pickering are described. The opening of the Nuclear Communications Centre, in 1978, resulting from a search for an effective means of maintaining public acceptance of Ontario Hydro's extensive nuclear power programme. Activities include participation in the interactive computer games, guided tours of educational exhibits including a model of Pickering A generating station, and displays depicting the Candu fuel cycle, outdoor exhibits of renewable energy sources, and tours of the plant. Outside activities include lectures to schools and citizen, business, or professional groups. (U.K.)

  8. Design Considerations for an Intensive Autism Treatment Centre

    Science.gov (United States)

    Deochand, Neil; Conway, Alissa A.; Fuqua, R. Wayne

    2015-01-01

    Individuals with autistic spectrum disorder (ASD) who display severe and challenging behaviour sometimes require centre-based intensive applied behaviour analysis (ABA) therapy to meet their health, safety and educational needs. Unfortunately, despite the need for centre-based treatment, there is a paucity of empirical research on building and…

  9. The Association of Gum Bleeding with Respiratory Health in a Population Based Study from Northern Europe.

    Directory of Open Access Journals (Sweden)

    Francisco Gómez Real

    Full Text Available There is little knowledge about how oral and respiratory health is interrelated even though the mucosa of the oral cavity and airways constitutes a continuum and the exposures to these are partly similar.To investigate whether gum bleeding is related to asthma, respiratory symptoms and self-reported COPD.A postal questionnaire including questions about respiratory and oral health was sent to general population samples in seven Northern European centres. In 13,409 responders, gum bleeding when brushing teeth was reported always/often by 4% and sometimes by 20%. Logistic regressions accounted for age, smoking, educational level, centre and gender. Effects of BMI, cardio-metabolic diseases, early life factors, gastro-oesophageal reflux, dental hygiene, nasal congestion, and asthma medication were addressed.Gum bleeding always/often was significantly associated with ≥ 3 asthma symptoms (OR 2.58, 95% CI 2.10-3.18, asthma (1.62 [1.23-2.14] and self-reported COPD (2.02 [1.28-3.18]. There was a dose-response relationship between respiratory outcomes and gum bleeding frequency (≥ 3 symptoms: gum bleeding sometimes 1.42 [1.25-1.60], often/always 2.58 [2.10-3.18], and there was no heterogeneity between centres (p(heterogeneity = 0.49. None of the investigated risk factors explained the associations. The observed associations were significantly stronger among current smokers (p(interaction = 0.004.A consistent link between gum bleeding and obstructive airways disease was observed, not explained by common risk factors or metabolic factors. We speculate that oral pathogens might have unfavourable impact on the airways, and that the direct continuity of the mucosa of the oral cavity and the airways reflects a pathway that might provide novel opportunities for interventions.

  10. Person-centred care in nursing documentation.

    LENUS (Irish Health Repository)

    Broderick, Margaret C

    2012-12-07

    BACKGROUND: Documentation is an essential part of nursing. It provides evidence that care has been carried out and contains important information to enhance the quality and continuity of care. Person-centred care (PCC) is an approach to care that is underpinned by mutual respect and the development of a therapeutic relationship between the patient and nurse. It is a core principle in standards for residential care settings for older people and is beneficial for both patients and staff (International Practice Development in Nursing and Healthcare, Chichester, Blackwell, 2008 and The Implementation of a Model of Person-Centred Practice in Older Person Settings, Dublin, Health Service Executive, 2010a). However, the literature suggests a lack of person-centredness within nursing documentation (International Journal of Older People Nursing 2, 2007, 263 and The Implementation of a Model of Person-Centred Practice in Older Person Settings, Dublin, Health Service Executive, 2010a). AIMS AND OBJECTIVES: To explore nursing documentation in long-term care, to determine whether it reflected a person-centred approach to care and to describe aspects of PCC as they appeared in nursing records. METHOD: A qualitative descriptive study using the PCN framework (Person-centred Nursing; Theory and Practice, Oxford, Wiley-Blackwell, 2010) as the context through which nursing assessments and care plans were explored. RESULTS: Findings indicated that many nursing records were incomplete, and information regarding psychosocial aspects of care was infrequent. There was evidence that nurses engaged with residents and worked with their beliefs and values. However, nursing documentation was not completed in consultation with the patient, and there was little to suggest that patients were involved in decisions relating to their care. IMPLICATIONS FOR PRACTICE: The structure of nursing documentation can be a major obstacle to the recording of PCC and appropriate care planning. Documentation

  11. Clarifying the role of mean centring in multicollinearity of interaction effects.

    Science.gov (United States)

    Shieh, Gwowen

    2011-11-01

    Moderated multiple regression (MMR) is frequently employed to analyse interaction effects between continuous predictor variables. The procedure of mean centring is commonly recommended to mitigate the potential threat of multicollinearity between predictor variables and the constructed cross-product term. Also, centring does typically provide more straightforward interpretation of the lower-order terms. This paper attempts to clarify two methodological issues of potential confusion. First, the positive and negative effects of mean centring on multicollinearity diagnostics are explored. It is illustrated that the mean centring method is, depending on the characteristics of the data, capable of either increasing or decreasing various measures of multicollinearity. Second, the exact reason why mean centring does not affect the detection of interaction effects is given. The explication shows the symmetrical influence of mean centring on the corrected sum of squares and variance inflation factor of the product variable while maintaining the equivalence between the two residual sums of squares for the regression of the product term on the two predictor variables. Thus the resulting test statistic remains unchanged regardless of the obvious modification of multicollinearity with mean centring. These findings provide a clear understanding and demonstration on the diverse impact of mean centring in MMR applications. ©2011 The British Psychological Society.

  12. Ordinance on the Finnish Centre of Radiation and Nuclear Safety

    International Nuclear Information System (INIS)

    1990-01-01

    This Ordinance was adopted in implementation of the 1983 Act setting up the Finnish Centre for Radiation and Nuclear Safety and the 1987 Nuclear Energy Act and entered into force on 1 November 1990. The Ordinance specifies the tasks of the Centre, as provided under both Acts, and gives it several supplementary responsibilities. In addition to its overall competence in respect of radiation safety, the Centre will carry out research into and supervise the health effects of radiation and maintain a laboratory for national measurements in that field. The Ordinance also sets out the Centre's organisation chart and the staff duties [fr

  13. Space education in Kiruna, Northern Sweden

    Directory of Open Access Journals (Sweden)

    I. Sandahl

    2005-01-01

    Full Text Available The town of Kiruna in the north of Sweden has a concentration of space activities and space research with, for example, the Swedish Institute of Space Physics, Esrange, the ESA Salmijärvi satellite station, and EISCAT (European Incoherent Scatter Radar Scientific Association. The Department of Space Science is a joint department between the two most northern universities in Sweden, Luleå University of Technology and Umeå University in collaboration with the Swedish Institute of Space Physics. It offers a range of education programmes in the space field. There are bachelor and master programmes in space engineering, and a bridging programme for students without a science background from secondary school. The Department also contributes to courses for teachers, Ph.D. courses and secondary school level courses. One master´s program and a three week summer course are given entirely in English and welcome international students. Thanks to good cooperation with Esrange students can build and fly experiments on high altitude balloons and sounding rockets and also take a large responsibility for the management of the projects. Close interaction with research and industry is an important part of the education.

  14. TTI Phase 2 Institutional Support: Economic Policy Research Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    TTI Phase 2 Institutional Support: Economic Policy Research Centre ... the Economic Policy Research Centre's (EPRC) role as a credible public policy institution in ... IWRA/IDRC webinar on climate change and adaptive water management.

  15. Training of selected categories of personnel in VUJE branch training centre

    International Nuclear Information System (INIS)

    Jacko, J. et al.

    1983-01-01

    The educational and research activity is described of the training centre which trains personnel for nuclear power plants in Czechoslovakia. Educational work includes training of personnel, the development of instructional and training aids, the assignment of tutors, curriculum development and the organization of final examinations. The results of the centre's educational work for the years 1979 to 1982 are tabulated. The research work of the centre is aimed at improving and increasing the effectiveness of the educational and training process. The spaces and equipment of the centre are described as are personnel conditions, the approach of trainees to education and the attitude of managerial staff to the centre's activities. (J.P.)

  16. Family-centred care of children in hospital - a concept analysis

    DEFF Research Database (Denmark)

    Mikkelsen, Gitte; Frederiksen, Kirsten

    2011-01-01

    from 1951 to 2009 resulted in a sample of 25 research articles. Review methods.  A theoretical concept analysis influenced by Risjord's distinction between theoretical and colloquial analyses and based on the principles developed by Morse, Hupcey and Penrod was used to examine the structure...... of professionals and families, mostly represented by mothers. Few attempts have been made to operationalize the concept. Conclusion.  Family-centred care is a partially mature and highly abstract concept. Developing a theory of family-centred care could position the concept in a theoretical context and should also......mikkelsen g. & frederiksen k. (2011) Family-centred care of children in hospital - a concept analysis. Journal of Advanced Nursing67(5), 1152-1162. ABSTRACT: Aim.  This paper reports a concept analysis of family-centred nursing care of hospitalized children. Background.  Family-centred care...

  17. Centre for Political and

    African Journals Online (AJOL)

    user

    and definitions will be published and the data translated into the official ... The Centre provides a terminological and subject-related service to lecturers and ... postgraduate students in international politics, political studies and .... obtain financial contributions (cf. .... making of authoritative and enforceable rules (laws) for.

  18. Implementing Responsibility Centre Budgeting

    Science.gov (United States)

    Vonasek, Joseph

    2011-01-01

    Recently, institutes of higher education (universities) have shown a renewed interest in organisational structures and operating methodologies that generate productivity and innovation; responsibility centre budgeting (RCB) is one such process. This paper describes the underlying principles constituting RCB, its origin and structural elements, and…

  19. India | Page 52 | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    Language French. Read more about Startup : Philippine Community eCentres Network. Language English. Read more about Mise sur pied d'un réseau philippin de télécentres communautaires. Language French. Read more about Compétences, gouvernance et nanotechnologies : pleins feux sur l'Inde. Language French.

  20. The internal combustion engine; a simple solution for pollution from petroleum hydrocarbons

    International Nuclear Information System (INIS)

    Johnson, G.A.

    1992-01-01

    The internal combustion (IC) engine is an indirect cause of groundwater and soil contamination from petroleum hydrocarbons. Leaking underground storage tank systems that are used to store and distribute fuel for automobiles are a major cause of environmental degradation. That same IC engine which has indirectly caused the pollution is an excellent tool for cleaning up environmental contamination from petroleum releases. An extremely flexible clean-up system using an IC engine was designed, constructed and operated to recover free product, treat contaminated soil and remediate groundwater pollution. The treatment system uses the IC engine for vapor extraction, groundwater pumping, spray aeration and incineration. The IC engine is an excellent incinerator. The petroleum vapors are burned in the IC engine with a supplemental propane fuel. The engine drives a power-takeoff unit and provides energy for an air compressor, water pump, electrical generation and other accessories. Using waste to energy methods multiple techniques are being used in combination with different treatment technologies to optimize the remediation. As the remediation progresses the treatment system can be modified to use additional techniques. Another benefit that is directly associated with the IC engine is the presence of excess heat which is helpful in northern climates. The excess heat has many uses including spray aeration and enhanced biological remediation. The IC engine has several limitations and requires an understanding of the physical and chemical properties of the contamination. As with all environmental remediation, a proper understanding of the Hydrogeological System is critical. When properly applied the IC engine has many advantages over other methods of remediation for petroleum hydrocarbons

  1. Culturally responsive engineering education: A case study of a pre-college introductory engineering course at Tibetan Children's Village School of Selakui

    Science.gov (United States)

    Santiago, Marisol Mercado

    Culturally responsive teaching has been argued to be effective in the education of Indigenous youth. This approach emphasizes the legitimacy of a group's cultural heritage, helps to associate abstract academic knowledge with the group's sociocultural context, seeks to incorporate a variety of strategies to engage students who have different learning styles, and strives to integrate multicultural information in the educational contents, among other considerations. In this work, I explore the outcomes of a culturally responsive introductory engineering short course that I developed and taught to Tibetan students at Tibetan Children's Village of Selakui (in Uttarakhand, India). Based on my ethnographic research in Tibetan communities in northern India, I examine two research questions: (a) What are the processes to develop and implement a pre-college culturally responsive introductory engineering course? and (b) How do Tibetan culture and Buddhism influence the engineering design and teamwork of the pre-college Tibetan students who took the course? I designed then taught the course that featured elementary lectures on sustainability, introductory engineering design, energy alternatives, and manufacturing engineering. The course also included a pre-college engineering design project through which Tibetan high school students investigated a problem at the school and designed a possible solution to it. Drawing from postcolonial studies, engineering studies, engineering and social justice, Buddhist studies, and Tibetan studies, I provide an analysis of my findings. Based on my findings, I conclude that my culturally responsive approach of teaching was an effective method to help students feel that their cultural background was respected and included in a pre-college engineering course; however, some students felt resistance toward the teaching approach. In addition, the culturally relevant content that connected with their ways of living in their school, Tibetan

  2. A new visitor centre for CMS

    CERN Document Server

    2001-01-01

    At the inauguration of the new CMS visitor centre. The CMS experiment inaugurated a new visitor centre at its Cessy site on 14 June. This will allow the thousands of people who come to CERN each year to follow the construction of one the Laboratory's flagship experiments first-hand. CERN receives over 20,000 visitors each year. Until recently, many of them were taken on a guided tour of one of the LEP experiments. With the closure of LEP, however, trips underground are no longer possible, and the Visits' Service has put in place a number of other itineraries (Bulletin 46/2000). Since the CMS detector will be almost entirely constructed in a surface hall, it is now taking a big share of the limelight. The CMS visitor centre has been built on a platform overlooking CMS construction. It contains a set of clear descriptive posters describing the experiment, along with a video projection showing animations and movies about CMS construction. In the coming weeks, a display of CMS detector elements will be added, as...

  3. ENEN - European nuclear engineering network

    International Nuclear Information System (INIS)

    Comsa, Olivia; Paraschiva, M.V.; Banutoiu, Maria

    2002-01-01

    The paper presents the main objectives and expected results of European Project FP5 - ENEN - 'European Nuclear Engineering Network'. The underlying objective of the work is safeguarding the nuclear knowledge and expertise through the preservation of higher nuclear engineering education. Co-operation between universities and universities and research centres, will entail a better use of dwindling teaching capacity, scientific equipment and research infrastructure. 'Today, the priorities of the scientific community regarding basic research lie elsewhere than in nuclear sciences. Taken together, these circumstances create a significantly different situation from three to four decades ago when much of the present competence base was in fact generated. In addition, many of the highly competent engineers and scientists, who helped create the present nuclear industry, and its regulatory structure, are approaching retirement age. These competence issues need to be addressed at Community level and a well designed Community research and training programme should play a role that is more important than ever before. This is an area where the concept of an European research area should be further explored'. The outcome from this project should be a clear road map for the way ahead in nuclear engineering education in Europe. The underlying objective of the concerted action is the preservation of nuclear knowledge and expertise through the preservation of higher nuclear engineering education. 'Many diverse technologies, currently serving nations world-wide, would be affected by an inadequate number of future nuclear scientists and engineers. Nuclear technology is widespread and multidisciplinary: nuclear and reactor physics, thermal hydraulics and mechanics, material science, chemistry, health science, information technology and a variety of other areas. Yet the advancement of this technology, with all its associated benefits, will be threatened if not curtailed unless the

  4. Intermediate-term earthquake prediction and seismic zoning in Northern Italy

    International Nuclear Information System (INIS)

    Panza, G.F.; Orozova Stanishkova, I.; Costa, G.; Vaccari, F.

    1993-12-01

    The algorithm CN for intermediate earthquake prediction has been applied to an area in Northern Italy, which has been chosen according to a recently proposed seismotectonic model. Earthquakes with magnitude ≥ 5.4 occur in the area with a relevant frequency and their occurrence is predicted by algorithm CN. Therefore a seismic hazard analysis has been performed using a deterministic procedure, based on the computation of complete synthetic seismograms. The results are summarized in a map giving the distribution of peak ground acceleration, but the complete time series are available, which can be used by civil engineers in the design of new seismo-resistant constructions and in the retrofitting of the existing ones. This risk reduction action should be intensified in connection with warnings issued on the basis of the forward predictions made by CN. (author). Refs, 7 figs, 1 tab

  5. Castor Seed from Melkasa Agricultural Research Centre, East Showa, Ethiopia and it’s biodiesel performance in Four Stroke Diesel Engine

    Directory of Open Access Journals (Sweden)

    Tesfahun Tegegne Akanawa

    2014-05-01

    Full Text Available This study focused in investigating the fuel properties of Castor oil Methyl Ester (CME and its blend with diesel fuel in running a diesel engine. Engine tests have been carried out with the aim of obtaining comparative measures of torque, power, and specific fuel consumption. Castor oil was extracted by using a mechanical pressing machine and trans-esterification was made by methyl alcohol and potassium hydroxide as a catalyst.  So that its viscosity and density were reduced and by increasing its volatility.  By following the procedures given in American Society for Testing and Materials (ASTM book the fuel characteristics were identified whether it fulfil the requirements needed to be used as a fuel in internal combustion engines or not. From the characterization result, it was proved that trans-esterified castor oil was found to be a promising alternative fuel for compression ignition (diesel engines. But the viscosity of CME was still higher and the energy content was a little bit less as compared to petro diesel. To solve these problems CME was blended with petro diesel in some proportion (B5, B10, B20, B40, B80. The torque, power and brake specific fuel consumption performances of CME and its blends with petro diesel were tested in a four stroke diesel engine. The analyzed results were compared with that of petro diesel and found to be very nearly similar, making CME a suiTable alternative fuel for petro diesel.

  6. Seven new species of Begonia (Begoniaceae) in Northern Vietnam and Southern China

    Science.gov (United States)

    Chen, Wen-Hong; Radbouchoom, Sirilak; Nguyen, Hieu Quang; Nguyen, Hiep Tien; Nguyen4, Khang Sinh; Shui, Yu-Min

    2018-01-01

    Abstract Since 2016, KIB (Kunming Institute of Botany) and CPC (Centre for Plant Conservation of Vietnam) have conducted several surveys in the transboundary karst regions in Northern Vietnam and Southern China and seven new species in the genus Begonia Linn. (Begoniaceae) are firstly described. Amongst them, two species, Begonia albopunctata Y.M. Shui, W.H. Chen & H.Q. Nguyen and B. erectocarpa H.Q. Nguyen, Y.M. Shui & W.H. Chen, respectively belong to section Sphenanthera with berry fruits and section Leprosae with clavate berry fruits; four species, B. gulongshanensis Y.M. Shui & W. H. Chen, B. minissima H.Q. Nguyen, Y.M. Shui & W.H. Chen, B. mollissima Y.M. Shui, H.Q. Nguyen & W.H. Chen, B. rhytidophylla Y.M. Shui & W.H. Chen, belong to section Coelocentrum with parietal placentation; one species, Begonia bambusetorum H.Q. Nguyen, Y.M. Shui & W.H. Chen, belongs to section Diploclinium with 3-loculed ovary and capsules. The diagnostic characters of these species are described and illustrated in the text and photographs. PMID:29416422

  7. Northern Cheyenne Reservation Coal Bed Natural Resource Assessment and Analysis of Produced Water Disposal Options

    Energy Technology Data Exchange (ETDEWEB)

    Shaochang Wo; David A. Lopez; Jason Whiteman Sr.; Bruce A. Reynolds

    2004-07-01

    Coalbed methane (CBM) development in the Powder River Basin (PRB) is currently one of the most active gas plays in the United States. Monthly production in 2002 reached about 26 BCF in the Wyoming portion of the basin. Coalbed methane reserves for the Wyoming portion of the basin are approximately 25 trillion cubic feet (TCF). Although coal beds in the Powder River Basin extend well into Montana, including the area of the Northern Cheyenne Indian Reservation, the only CBM development in Montana is the CX Field, operated by the Fidelity Exploration, near the Wyoming border. The Northern Cheyenne Reservation is located on the northwest flank of the PRB in Montana with a total land of 445,000 acres. The Reservation consists of five districts, Lame Deer, Busby, Ashland, Birney, and Muddy Cluster and has a population of 4,470 according to the 2000 Census. The CBM resource represents a significant potential asset to the Northern Cheyenne Indian Tribe. Methane gas in coal beds is trapped by hydrodynamic pressure. Because the production of CBM involves the dewatering of coalbed to allow the release of methane gas from the coal matrix, the relatively large volume of the co-produced water and its potential environmental impacts are the primary concerns for the Tribe. Presented in this report is a study conducted by the Idaho National Engineering and Environmental Laboratory (INEEL) and the Montana Bureau of Mines and Geology (MBMG) in partnership with the Northern Cheyenne Tribe to assess the Tribe’s CBM resources and evaluate applicable water handling options. The project was supported by the U.S. Department of Energy (DOE) through the Native American Initiative of the National Petroleum Technology Office, under contract DEAC07- 99ID13727. Matching funds were granted by the MBMG in supporting the work of geologic study and mapping conducted at MBMG.

  8. The CERN Control Centre is up and running!

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    The CERN Control Centre (CCC) that combines all the control rooms for the accelerators, the cryogenic system and the technical infrastructure came into operation on 1st February. On 1st February, at 2.00 p.m., Patrick Villeton Pachot started the first Technical Infrastructure shift at the brand new CERN Control Centre.

  9. Centre for Educational Technology: The Neglected Basic in ...

    African Journals Online (AJOL)

    In view of the significance of centre for educational technology as the basis for teacher training programme in the colleges of education, precise understanding of the purpose of establishing the centre and its functions needs to be brought to the knowledge of the concern group. Therefore, this paper discusses the functions ...

  10. Aspects of Structure and Dynamics at a Refugee Centre in Denmark

    DEFF Research Database (Denmark)

    Mackrill, Thomas Edward

    1996-01-01

    This article presents an empirical analysis that is part of a practice research project carried out at a Danish Red Cross refugee centre in Copenhagen. It focuses on the relation between the individual refugee and the receiving institution. It points out how the organizational structure...... of a particular refugee centre enables discord between refugees and centre workers as well as among the centre staff. It analyses some of the dynamics of the conflicts that are facilitated by the structure...

  11. Simulations of Multi Combustion Modes Hydrogen Engines for Heavy Duty Trucks

    Directory of Open Access Journals (Sweden)

    Alberto A. Boretti

    2012-01-01

    Full Text Available The paper presents the numerical study of a diesel direct injection heavy duty truck engine converted to hydrogen. The engine has a power turbine connected through a clutch and a continuously variable transmission to the crankshaft. The power turbine may be disconnected and by-passed when it is inefficient or inconvenient to use. The conversion is obtained by replacing the Diesel injector with a hydrogen injector and the glow plug with a jet ignition device. The hydrogen engine operates different modes of combustion depending on the relative phasing of the main injection and the jet ignition. The engine generally operates mostly in Diesel-like mode, with the most part of the main injection following the suitable creation in cylinder conditions by jet ignition. For medium-low loads, better efficienciy is obtained with the gasoline-like mode jet igniting the premixed homogeneous mixture at top dead centre. It’s permitted at higher loads or at very low loads for the excessive peak pressure or the mixture too lean to burn rapidly. The hydrogen engine has better efficiency than Diesel outputs and fuel conversion. Thanks to the larger rate of heat release, it has the opportunity to run closer to stoichiometry and the multi mode capabilities. The critical area for this engine development is found in the design of a hydrogen injector delivering the amount of fuel needed to the large volume cylinder within a Diesel-like injection time.

  12. Climate change between the mid and late Holocene in northern high latitudes – Part 2: Model-data comparisons

    Directory of Open Access Journals (Sweden)

    K. Holmgren

    2010-09-01

    Full Text Available The climate response over northern high latitudes to the mid-Holocene orbital forcing has been investigated in three types of PMIP (Paleoclimate Modelling Intercomparison Project simulations with different complexity of the modelled climate system. By first undertaking model-data comparison, an objective selection method has been applied to evaluate the capability of the climate models to reproduce the spatial response pattern seen in proxy data. The possible feedback mechanisms behind the climate response have been explored based on the selected model simulations. Subsequent model-model comparisons indicate the importance of including the different physical feedbacks in the climate models. The comparisons between the proxy-based reconstructions and the best fit selected simulations show that over the northern high latitudes, summer temperature change follows closely the insolation change and shows a common feature with strong warming over land and relatively weak warming over ocean at 6 ka compared to 0 ka. Furthermore, the sea-ice-albedo positive feedback enhances this response. The reconstructions of temperature show a stronger response to enhanced insolation in the annual mean temperature than winter and summer temperature. This is verified in the model simulations and the behaviour is attributed to the larger contribution from the large response in autumn. Despite a smaller insolation during winter at 6 ka, a pronounced warming centre is found over Barents Sea in winter in the simulations, which is also supported by the nearby northern Eurasian continental and Fennoscandian reconstructions. This indicates that in the Arctic region, the response of the ocean and the sea ice to the enhanced summer insolation is more important for the winter temperature than the synchronous decrease of the insolation.

  13. Academic Drug Discovery Centres

    DEFF Research Database (Denmark)

    Kirkegaard, Henriette Schultz; Valentin, Finn

    2014-01-01

    Academic drug discovery centres (ADDCs) are seen as one of the solutions to fill the innovation gap in early drug discovery, which has proven challenging for previous organisational models. Prior studies of ADDCs have identified the need to analyse them from the angle of their economic...

  14. 7 CFR 457.143 - Northern potato crop insurance-quality endorsement.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Northern potato crop insurance-quality endorsement... Northern potato crop insurance—quality endorsement. The Northern Potato Crop Insurance Quality Endorsement...) Both FCIC and reinsured policies: Northern Potato Crop Insurance Quality Endorsement 1. Definitions...

  15. Executive Summary: Forests of the Northern United States

    Science.gov (United States)

    Stephen R. Shifley; Francisco X. Aguilar; Nianfu Song; Susan I. Stewart; David J. Nowak; Dale D. Gormanson; W. Keith Moser; Sherri Wormstead; Eric J. Greenfield

    2012-01-01

    This executive summary provides an overview of the 200-page report, Forests of the Northern United States, which covers in detail current forest conditions, recent trends, issues, threats and opportunities in the forests in the 20 Northern States. It provides a context for subsequent Northern Forest Futures Project analyses that will forecast alternative future...

  16. Siting, design and cost of shallow land burial facilities in northern New England. Volume 1

    International Nuclear Information System (INIS)

    1985-05-01

    This study investigated the technical feasibility and cost of shallow land burial (SLB) as one low-level radioactive waste disposal option for Maine and the northern New England states of Maine, New Hampshire, and Vermont. The results are presented in five chapters addressing the licensing process for an SLB facility, the siting process, the engineering design, the cost of disposal, and the cost of transportation. Chapter 2 reviews the Federal and State licensing processes and requirements for development of an SLB facility. Included in this discussion are the stages in the life cycle of SLB facility. Chapter 3 provides site selection criteria for Maine and presents a proposed site selection methodology. The site selection criteria are defined and the reasoning behind their selection is explained. Chapter 4 discusses SLB trench and facility designs and costs. To accommodate different waste volume scenarios, differently sized facilities are discussed, representing Maine going-it-alone and a northern New England compact. Designs and costs of scenarios including nuclear power plant decommissioning wastes are also discussed. Cost estimates of licensing, facility construction, operation, closure, and post closure care are presented for the different waste volume scenarios. Chapter 5 presents estimates of what it would cost LLW generators to dispose of their waste in a Maine-only or a northern New England shallow land burial facility. The reliability of the estimates and their sensitivity to changes in waste volume are also discussed. Chapter 6 examines transportation costs

  17. The impact of distance and duration of travel on participation rates and participants' satisfaction: results from a pilot study at one study centre in Pretest 2 of the German National Cohort.

    Science.gov (United States)

    Schweitzer, Aparna; Akmatov, Manas K; Kindler, Florentina; Kemmling, Yvonne; Kreienbrock, Lothar; Krause, Gérard; Pessler, Frank

    2015-08-21

    In this pilot study within the Pretest 2 phase of the German National Cohort, we aimed to (1) test the hypothesis that distance and duration of travel to a study centre may affect participation rates and participants' satisfaction and (2) to obtain data that would help to select recruitment areas around the study centre Hannover with the greatest projected participation rate for the main study. Mixed urban/suburban environment in Northern Germany with approximately 600,000 inhabitants. 4 recruitment areas with divergent estimated mean distances (range, 7-40 km) and duration of travel to the study centre Hannover were selected. 1050 men and women (ratio, 1:1), aged 20-69 years, were randomly selected from the population registries of the 4 recruitment areas and invited by mail to participate in the Pretest 2 study programme at the study centre Hannover, covering a variety of questionnaire-based and physical assessments. 166 individuals participated (16%). All 166 participants completed a travel questionnaire containing 5 items relating to travel duration and satisfaction, amounting to a participation rate of 100% in the questionnaire-based part of the study. Participation rates in the Pretest 2 programme at the study centre Hannover by area ranged from 11% (area farthest from the study centre, estimated median distance 38 km) to 18% (nearest area, 2 km). The odds of non-participation were highest in the area farthest from the study centre (adjusted OR 2.06; p=0.01; CI 1.28 to 3.32). Nonetheless, 97% of participants were satisfied with travel duration. Increasing distance was associated with a lower participation rate. However, acceptance of duration of travel was high, irrespective of distance or duration. Thus, recruiting in farther away locations may select individuals with a greater frustration tolerance for travel to the study centre, perhaps due to a greater interest in participating in health-oriented studies and thus different health-related behaviour

  18. Karlsruhe Nuclear Research Centre. Programme budget 1988

    International Nuclear Information System (INIS)

    1987-01-01

    Following a general survey of tasks, planned activities and developmental trends of the nuclear research centre, the report gives an account of the activities to be performed in the subject fields of main interest, showing the budgeting figures for annual expenditure (for personnel, investments, operating costs) up to the year 1991. Further information explains the infrastructure of the centre and the distribution of overall expenditure as well as the budgetary planning. (UA) [de

  19. Proximity to the treating centre and outcomes following subarachnoid hemorrhage.

    Science.gov (United States)

    O'Kelly, Cian J; Spears, Julian; Urbach, David; Wallace, M Christopher

    2011-01-01

    In the management of subarachnoid hemorrhage (SAH), the potential for early complications and the centralization of limited resources often challenge the delivery of timely neurosurgical care. We sought to determine the impact of proximity to the accepting neurosurgical centre on outcomes following aneurysmal SAH. Using administrative data, we analyzed patients undergoing treatment for aneurysmal subarachnoid hemorrhage at neurosurgical centres in Ontario between 1995 and 2004. We compared mortality for patients receiving treatment at a centre in their county (in-county) versus those treated from outside counties (out-of-county). We also examined the impact of distance from the patient's residence to the treating centre. The mortality rates were significantly lower for in-county versus out-of-county patients (23.5% vs. 27.6%, p=0.009). This advantage remained significant after adjusting for potential confounders (HR=0.84, p=0.01). The relationship between distance from the treating centre and mortality was biphasic. Under 300 km, mortality increased with increasing distance. Over 300 km, a survival benefit was observed. Proximity to the treating neurosurgical centre impacts survival after aneurysmal SAH. These results have significant implications for the triage of these critically ill patients.

  20. Colour centre recovery in yttria-stabilised zirconia: photo-induced versus thermal processes

    Science.gov (United States)

    Costantini, Jean-Marc; Touati, Nadia; Binet, Laurent; Lelong, Gérald; Guillaumet, Maxime; Beuneu, François

    2018-05-01

    The photo-annealing of colour centres in yttria-stabilised zirconia (YSZ) was studied by electron paramagnetic resonance spectroscopy upon UV-ray or laser light illumination, and compared to thermal annealing. Stable hole centres (HCs) were produced in as-grown YSZ single crystals by UV-ray irradiation at room temperature (RT). The HCs produced by 200-MeV Au ion irradiation, as well as the F+-type centres (? centres involving oxygen vacancies) were left unchanged upon UV illumination. In contrast, a significant photo-annealing of the latter point defects was achieved in 1.4-MeV electron-irradiated YSZ by 553-nm laser light irradiation at RT. Almost complete photo-bleaching was achieved by laser irradiation inside the absorption band of ? centres centred at a wavelength 550 nm. Thermal annealing of these colour centres was also followed by UV-visible absorption spectroscopy showing full bleaching at 523 K. Colour-centre evolutions by photo-induced and thermally activated processes are discussed on the basis of charge exchange processes between point defects.

  1. Interim report to the Northern Ecosystem Initiative from the Northern Ecological Monitoring and Assessment Network (EMAN-North)

    International Nuclear Information System (INIS)

    Wakelyn, L.; Eamer, J.

    2001-01-01

    The Northern Ecological Monitoring and Assessment Network (EMAN-North) has received funding for a proposal submitted to the Northern Ecosystems Initiative (NEI) in January 2001. EMAN-North is a network that coordinates ecological monitoring in northern Canada. Its geographic scope comprises 40 per cent of the geographic area of Canada, including Yukon, Northwest Territories and Nunavut, and an area near Churchill, Manitoba. Funding was awarded because the proposed EMAN-North project addressed the NEI priority of Monitoring Ecosystem Status and Trends, and Ecosystem Impacts of Climate Change. The project was also aimed at improving the network's capacity for long-term ecological monitoring, assessment and reporting. Several activities deal specifically with ecological impacts of climate change. This paper described the need and the context for ecological monitoring in northern Canada and defined a strategic direction for EMAN-North. The project will include many individuals involved in ecological monitoring in the north to deliver information on ecosystem changes to decision-makers and the public. refs., tabs., figs

  2. Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse - CSNSM/Centre for nuclear and mass spectroscopy, Activity Report 2007-2009

    International Nuclear Information System (INIS)

    2010-01-01

    The Centre for nuclear and mass spectroscopy (CSNSM) is a CNRS (National Centre for Scientific Research) laboratory affiliated with Paris-Sud University. The CSNSM is involved in pluri-disciplinary activities covering various scientific domains: Nuclear Structure (SNO), Nuclear Astrophysics (AN), Solid State Astrophysics (AS), Solid State Physics (PS) and Chemical Physics of Irradiation. This document presents the activity of the Centre during the 2007-2009 years: Nuclear Astrophysics; Solid State Astrophysics; Physics and Chemistry of Irradiation; Solid State Physics and cryogenic detectors; Solid State Physics, Condensed Matter and Irradiation; Structure of the Atomic Nucleus; Teaching and training activities; Spreading scientific culture; Administrative services; Electronics Group; Computer Department; Mechanics Department; RESET Service (Radiation-Environment-Safety- Maintenance-Work); SEMIRAMIS (ion source and ion beam handling)

  3. Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse - CSNSM/Centre for nuclear and mass spectroscopy, Activity Report 2010-2012

    International Nuclear Information System (INIS)

    2013-07-01

    The Centre for nuclear and mass spectroscopy (CSNSM) is a CNRS (National Centre for Scientific Research) laboratory affiliated with Paris-Sud University. The CSNSM is involved in pluri-disciplinary activities covering various scientific domains: Nuclear Structure (SNO), Nuclear Astrophysics (AN), Solid State Astrophysics (AS), Solid State Physics (PS) and Chemical Physics of Irradiation. This document presents the activity of the Centre during the 2010-2012 years: Nuclear Astrophysics; Solid State Astrophysics; Physics and Chemistry of Irradiation; Solid State Physics Group; Condensed Matter and Irradiation: from fundamental to functional; Structure of the Atomic Nucleus; Teaching activities; Spreading scientific culture; Administrative services; Electronics Group; Computer Department; Mechanics Department; RESET Service (Radiation-Environment-Safety- Maintenance-Work); SEMIRAMIS (ion source and ion beam handling)

  4. Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse - CSNSM/Centre for nuclear and mass spectroscopy, Activity Report 1992-1994

    International Nuclear Information System (INIS)

    2003-01-01

    The Centre for nuclear and mass spectroscopy (CSNSM) is a CNRS (National Centre for Scientific Research) laboratory affiliated with Paris-Sud University. The CSNSM is involved in pluri-disciplinary activities covering various scientific domains: Nuclear Structure (SNO), Nuclear Astrophysics (AN), Solid State Astrophysics (AS), Solid State Physics (PS) and Chemical Physics of Irradiation. This document presents the activity of the Centre during the 1992-1994 years: 1 - Nuclear structure; 2 - Nuclear astrophysics; 3 - Basic symmetries; 4 - Accelerator-based mass spectroscopy; 5 - Solid State Astrophysics; 6 - Physics and Chemistry of Irradiation; 7 - Solid State Physics; 8 - SEMIRAMIS (ion source and ion beam handling); 9 - Computer Department; 10 - Electronics Group; 11 - Mechanics Department; 12 - Permanent training; 13 - Health and safety; 14 - Seminars; 15 - Dissertations; 16 - Publications; 17 - Staff

  5. The Application of Computer Systems Used in Logistics Centres by Courier Companies

    Directory of Open Access Journals (Sweden)

    Tomasz Szczepanik

    2017-06-01

    Full Text Available In the era of pervasive computerization, the need for rapid and uninterrupted transmission and receiving information handling systems is an essential component of business operations. The use of information technology to use the full capabilities of systems supporting the implementation of the basic processes in the logistics centres ensures proper implementation of tasks. Hence, courier companies cooperating with logistic centres have the opportunity to use the information systems used in logistics centres for the execution of the courier business. The purpose of this article is to identify the impact of information systems used in logistics centres for courier companies services. The article presents a class of information systems used in logistics centres and the number of systems used by courier companies. Characterized the impact of information systems to improve the operation of logistics centres and assesses the extent to which the use of the information system of logistics centres affects the information flow in courier companies. The study showed that the use of the IT systems offered by the logistics centres streamlines the efficiency of information flow in the courier service. Research has shown which IT systems logistics centres are use and how their use by courier companies affects the information flow in courier services.

  6. Students' perceptions of the flipped classroom model in an engineering course: a case study

    Science.gov (United States)

    Baytiyeh, Hoda; Naja, Mohamad K.

    2017-11-01

    The flipped classroom model is an innovative educational trend that has been widely adopted in the social sciences but not engineering education. In this model, an active instructional approach shifts the educational strategy from a teacher- to a student-centred approach. The purpose of this study is to compare the learning outcomes of engineering students attending a flipped-model section of the Dynamics of Structures course with students attending a traditional, lecture-based section of the same course taught by the same instructor. The results confirm previous research showing that test scores in the flipped course sections were slightly higher than traditional sections. Although the improvement in test scores was statistically insignificant, student statements indicated that the flipped model promoted a deeper, broader perspective on learning, facilitated problem-solving strategies and improved critical-thinking abilities, self-confidence and teamwork skills, which are needed for a successful engineering career.

  7. System of radiation monitoring of nuclear hazardous facilities in Institute of Atomic Energy of National Nuclear Centre

    International Nuclear Information System (INIS)

    Azarov, V.A.; Meshin, M.M.; Shuklin, G.S.

    1996-01-01

    Issues of radiation monitoring (RM) at reactor complex of Inst. of Atomic Energy (IAE) are discussed in report. The National Nuclear Centre's reactor base consists of 2 complexes situated in 2 different locations: Bajkal-1 and IGR. So far as IAE has common mythology for RM at all hazardous nuclear facilities the issues of RM for Baikal-1 and IGR Radiation monitoring system includes: - personal dosimetric control of personnel, maintaining the reactor systems and research laboratories; RM of industrial buildings; - RM of technical areas of technical area of the facility; sanitary system of dosimetry control (DC); etc. The description of stationary DC system of the complex based on 'System' facility are given. Baikal is surround by sanitary area with radius of 5 km and with its centre in the reactor location. Complexity of studying the radiation status on the territory of Baikal-1 and its surroundings is the result of nuclear testing conducted at the test site in the past, reactor operation with open exhaust of coolant into atmosphere while testing on Nuclear Rocket Engines program as well as global fall out of radionuclides

  8. Sowing pregerminated northern red oak acorns

    Science.gov (United States)

    Richard M. Godman; Gilbert A. Mattson

    1992-01-01

    Northern red oak is extremely difficult to regenerate, although it has produced good acorn crops nearly half of the last 32 years in northern Wisconsin. Field trials have shown that for successful seeding, you must protect acorns from predation by wildlife and sow them when temperatures are most favorable for germination.

  9. Review of CERN Computer Centre Infrastructure

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    The CERN Computer Centre is reviewing strategies for optimizing the use of the existing infrastructure in the future, and in the likely scenario that any extension will be remote from CERN, and in the light of the way other large facilities are today being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote computer centres. This presentation will give the details on the project’s motivations, current status and areas for future investigation.

  10. Computational intelligence in time series forecasting theory and engineering applications

    CERN Document Server

    Palit, Ajoy K

    2005-01-01

    Foresight in an engineering enterprise can make the difference between success and failure, and can be vital to the effective control of industrial systems. Applying time series analysis in the on-line milieu of most industrial plants has been problematic owing to the time and computational effort required. The advent of soft computing tools offers a solution. The authors harness the power of intelligent technologies individually and in combination. Examples of the particular systems and processes susceptible to each technique are investigated, cultivating a comprehensive exposition of the improvements on offer in quality, model building and predictive control and the selection of appropriate tools from the plethora available. Application-oriented engineers in process control, manufacturing, production industry and research centres will find much to interest them in this book. It is suitable for industrial training purposes, as well as serving as valuable reference material for experimental researchers.

  11. Methods in Mapping Usability of Malaysia’s Shopping Centre

    Directory of Open Access Journals (Sweden)

    Abdul Ghani Aida Affina

    2016-01-01

    Full Text Available With more than 200 number of shopping centre in Klang Valley itself, we the consumer actually have vast of choices. Instead of the machineries varieties from the lower class product till the posh one, each of those shopping centres eventually offers the typical product same as others. Those shopping centers are competing with each other and in great endeavour to attract more consumers, to visit and spend. As for the visitor, the typical product and boring ambience seems similar in all malls, and is looking something beyond the standard. Something that promising quality embedded in shopping centre which evokes the various emotions of the user along their journey in malls. This quality is known as usability. Usability; as defined generally is a global user’s experience response with product, environment, service or facilities. It is an assessment in extracting the qualities of shopping centre design. In mapping it, there are a few synthesizing methods to implement it. Therefore, this paper purposely to review the method that been used in usability of Malaysia’s shopping centre research with a few references on previous research done in usability assessment by predecessor’s scholars. With the accentuation on three elements that anchoring what the usability is: effectiveness, efficient and satisfaction, it is hope that this overview can lead other researcher in portraying its relationship with the quality and ‘user friendly’ design of shopping centre.

  12. Culture managers education: system dynamics model of the coworking design centre

    OpenAIRE

    Šviráková, Eva; Soukalová, Radomila; Bednář, Pavel; Danko, Lukáš

    2014-01-01

    Coworking Centre is a concept of joint use of space by individuals working in related spheres that seek their chance in the labour market as freelancers. The strategy for the development of creative region mentions coworking centres as one of its tools. This article aims to create a business model of the Coworking Design Centre. By simulating a coworking centre model we are increasing knowledge of the culture managers about this type of business. We have introduced teaching business using the...

  13. Victims' use of professional services in a Dutch sexual assault centre

    NARCIS (Netherlands)

    Bicanic, I.; Snetselaar, H.; de Jongh, A.; van de Putte, E.

    2014-01-01

    Background: Prior research endorsed the establishment of sexual assault centres in the Netherlands because of the potential benefit for victims’ mental recovery. In 2012, the first Dutch sexual assault centre was founded at the University Medical Center Utrecht. The aim of the centre is to provide

  14. IAEA To Launch Centre On Ocean Acidification

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: The International Atomic Energy Agency (IAEA) is to launch a new centre this summer to address the growing problem of ocean acidification. Operated by the Agency's Monaco Environmental Laboratories, the Ocean Acidification International Coordination Centre will serve the scientific community - as well as policymakers, universities, media and the general public - by facilitating, promoting and communicating global actions on ocean acidification. Growing amounts of carbon dioxide in the Earth's atmosphere are being absorbed in the planet's oceans which increases their acidity. According to the experts, ocean acidification may render most regions of the ocean inhospitable to coral reefs by 2050 if atmospheric carbon dioxide levels continue to increase. This could lead to substantial changes in commercial fish stocks, threatening food security for millions of people as well as the multi-billion dollar fishing industry. International scientists have been studying the effect and possible responses, and the new centre will help coordinate their efforts. ''During the past five years, numerous multinational and national research projects on ocean acidification have emerged and significant research advances have been made,'' said Daud bin Mohamad, IAEA Deputy Director General for Nuclear Sciences and Applications. ''The time is now ripe to provide international coordination to gain the greatest value from national efforts and research investments.'' The centre will be supported by several IAEA Member States and through the Peaceful Uses Initiative, and it will be overseen by an Advisory Board consisting of leading institutions, including the U.N. Intergovernmental Oceanographic Commission, the U.S. National Oceanic and Atmospheric Administration, the U.N. Food and Agriculture Organization, the Fondation Prince Albert II de Monaco, the OA-Reference User Group, as well as leading scientists and economists in the field. The new centre will focus on international

  15. Surface engineering and heat treatment

    International Nuclear Information System (INIS)

    Morton, P.H.

    1991-01-01

    This book is the proceedings of a Conference organised jointly by The Institute of Metals and The Centre for Exploitation of Science and Technology (CEST). It sets out to review this role and point the way to the future by collecting together a series of invited papers written by noted authorities in their fields. The opening review by CEST highlights the economic and industrial importance of Surface Engineering and is followed by a group of four articles devoted to specific branches of industry. Several technical papers then describe various aspects of the development of heat treatment over the last twenty-five years. These are followed by papers describing advances made possible by new technologies such as plasma, laser and ion beam. A separate abstract has been prepared for a paper on materials aspects of ion beam technology. (author)

  16. Envisioning a Future Decision Support System for Requirements Engineering : A Holistic and Human-centred Perspective

    OpenAIRE

    Alenljung, Beatrice

    2008-01-01

    Complex decision-making is a prominent aspect of requirements engineering (RE) and the need for improved decision support for RE decision-makers has been identified by a number of authors in the research literature. The fundamental viewpoint that permeates this thesis is that RE decision-making can be substantially improved by RE decision support systems (REDSS) based on the actual needs of RE decision-makers as well as the actual generic human decision-making activities that take place in th...

  17. African Journals Online: Northern Mariana Islands

    African Journals Online (AJOL)

    African Journals Online: Northern Mariana Islands. Home > African Journals Online: Northern Mariana Islands. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Browse By Category · Browse Alphabetically · Browse By Country · List All Titles · Free to read Titles This ...

  18. Do flow principles of operations management apply to computing centres?

    CERN Document Server

    Abaunza, Felipe; Hameri, Ari-Pekka; Niemi, Tapio

    2014-01-01

    By analysing large data-sets on jobs processed in major computing centres, we study how operations management principles apply to these modern day processing plants. We show that Little’s Law on long-term performance averages holds to computing centres, i.e. work-in-progress equals throughput rate multiplied by process lead time. Contrary to traditional manufacturing principles, the law of variation does not hold to computing centres, as the more variation in job lead times the better the throughput and utilisation of the system. We also show that as the utilisation of the system increases lead times and work-in-progress increase, which complies with traditional manufacturing. In comparison with current computing centre operations these results imply that better allocation of jobs could increase throughput and utilisation, while less computing resources are needed, thus increasing the overall efficiency of the centre. From a theoretical point of view, in a system with close to zero set-up times, as in the c...

  19. Intermodal Logistics Centres and Freight Corridors – Concepts and Trends

    Directory of Open Access Journals (Sweden)

    Norbert Wagener

    2017-09-01

    Full Text Available . Background: The development of international freight corridors, as the Trans European Network and new rail and inland shipping corridors in Asia and Africa, require efficient logistics centres along these corridors which serve as intermodal interfaces and provide a variety of different logistics service functions. The definition of the term logistics centre differs between countries and implies different functionalities. Locations are often selected randomly and business models are opportunity driven, especially in highly dynamic and less regulated new emerging economies. In particular Freight Villages as a special form of logistics centres have a high impact on regional development and serve as cargo generator for freight corridors. Consideration of general principles how to establish Freight Villages could improve the effectiveness of these logistics centres along freight corridors. Methods: Based on a literature review a comprehensive and hierarchical definition of logistics centres will be discussed and applied. From experiences in the development of logistics centres in several countries, especially in Germany and Lithuania, challenges and concepts concerning regulatory framework, determination of location and business and financing models are discussed. Results: Concerning the definition of logistics centres a hierarchical definition is applied which comprises different levels of logistics centres depending on the scope of the value adding and the functionality. As general principles for the development of Freight Villages the active role of the state, master planning, objective location finding, participation and co-operation of different stakeholders in the business model and a stepwise scheme for financing are introduced. Major trends for the future development of Freight Villages are the digitalization of supply chains, the application of new intermodal technologies and of innovative telematics systems, solutions for low emission and

  20. Nuclear research centres in the 21st century. Final report of a meeting

    International Nuclear Information System (INIS)

    2001-11-01

    During the last fifty years, a large number of countries have established nuclear research centres (NRCs) with the mission of developing indigenous expertise in nuclear science and technology, training scientists/engineers for research and development on nuclear power reactors and applications of radioisotopes and radiation, and facilitating commercial exploitation of nuclear technology. Many research centres have developed nuclear expertise on all aspects of nuclear science and technology through setting up and operating large nuclear facilities like research reactors, accelerators, fuel cycle facilities and the like. NRCs have been the cradle for a host of industries dealing with peaceful uses of nuclear energy. By virtue of their multidisciplinary nature, nuclear research centres have also been strategic elements of technology development in many countries and a number of industries have benefited by association with NRCs. For technologies which have already been deployed, there is a belief that less R and D from NRCs is required. Further, incidents like the Chernobyl accident have prompted many countries to re-evaluate the need for nuclear power. With increasing pressure on resources, the NRCs are facing a difficult situation in many countries, particularly in the developed countries. Government support and funding are dwindling and the infrastructure for nuclear R and D has aged as have the personnel. There is an apprehension that nuclear expertise itself may dwindle with time and the benefits of the nuclear science and technology may not be available in the future. The technology is less than 50 years old and there are many new avenues demanding R and D input. Co-operation among NRCs is one route to meet these challenges. Research and development in nuclear science and engineering has an international outlook. The IAEA has been active in promoting international co-operation ever since its formation more than 40 years ago. Towards the end of the last