WorldWideScience

Sample records for nonoxide refractory compounds

  1. Modern materials based on refractory compounds

    International Nuclear Information System (INIS)

    Kosolapova, T.Ya.

    1979-01-01

    Discussed are the existing methods for synthesizing powders of binary refractory compounds and high-productivity techniques which hold promise as regards the manufacture of highly disperse and pure powders. Plasmochemical synthesis is shown to be an effective method for obtaining practically all carbides, nitrides and borides. A description is given of three main methods for obtaining single crystals of refractory compounds (TiN, TiC, ZrC, ZrB 2 , NbC) fairly perfect in structure and composition. These processes include deposition from vapour-gas phase, melting in arc plasma and crystallization from solutions in metallic melts. The advantages have been shown of the self-propagating high-temperature synthesis of refractory compounds, ensuring the manufacture of products, close in composition to stoichiometric ones simultaneously with forming of items. Mechanical, thermal, abrasive, and resistive characteristics of the above materials are presented

  2. Fire and explosion hazards of refractory compound powders

    International Nuclear Information System (INIS)

    Krivtsov, V.A.; Kostina, E.S.

    1978-01-01

    Data on fire and explosion hazards of refractory compound powders (HfC, ZrC,LaB 6 , ZrN, etc.) are presented. It is shown that refractory compounds can be fire- and exposion hazardous in various degrees. Qualitative and quantitative estimations of one of fire-hazard characteristics - smoldering temperature - are presented

  3. Refractory compounds for repairing coke-oven brickwork

    Energy Technology Data Exchange (ETDEWEB)

    Hanganu, M.; Dragomir, C. (and others)

    1984-01-01

    A number of refractory compounds are presented, based on aluminium phosphate, phosphoric acid, sodium silicate and fire-clay and mullitic zirconium mastic, including their composition, properties and application (by impregnation, spray application or pouring), which are suitable for repairing various types of coke-oven brickwork. The results obtained are given.

  4. Optimization of the Technological Synthesis of Refractory Compounds

    Science.gov (United States)

    Gaidar, S. M.; Karelina, M. Yu.; Prikhod'ko, V. M.; Volkov, A. A.

    2017-12-01

    The results of experimental studies, which are related to the regulation of the fractional composition of refractory compounds by roll milling in using controlled roll opening and unbalanced peripheral speeds of rollers, are reported. The content of prepared fine, middle, and coarse fractions is within 50-80%; in this case, the milling time of synthesis products is less than the time of ball milling by an order of magnitude. The application of roll milling for refining the products of self-propagating high-temperature synthesis can be most efficient in using together with heat-generating reactor to solve the main problem of self-propagating synthesis (SHS), which is a problem for recent several decades (the problem is the creation of intense automated production of refractory compounds in using continuous manufacturing cycle within a energotechnological system with the recovery of a great quantity of heat released during SHS).

  5. Transformations in refractory compounds, caused by high pressures and temperatures

    International Nuclear Information System (INIS)

    Zajnulin, Yu.G.; Alyamovskij, S.I.; Shvejkin, G.P.

    1979-01-01

    Considered is the effect of high pressures and temperatures on structural features of refractory carbides, nitrides and monooxides of transition metals. The results are discussed on the basis of one component of the theory on daltonides and bertollides by N.S. Kurnakov - the theory of imaginary compounds, developed by G.B. Bokij. Several new ideas, resulting from this consideration, are formulated, It is shown that at high pressures and temperatures it is possible to obtain new electron modifications of compounds and to expand sufficiently the region of the existance of variable composition phases. The concept on imaginary compounds is shown to be true. A supposition is made on realization of numerous imaginary compounds at high pressures and temperatures. Other ways of production of imaginary compounds are recommended

  6. Biodesulfurization of refractory organic sulfur compounds in fossil fuels.

    Science.gov (United States)

    Soleimani, Mehran; Bassi, Amarjeet; Margaritis, Argyrios

    2007-01-01

    The stringent new regulations to lower sulfur content in fossil fuels require new economic and efficient methods for desulfurization of recalcitrant organic sulfur. Hydrodesulfurization of such compounds is very costly and requires high operating temperature and pressure. Biodesulfurization is a non-invasive approach that can specifically remove sulfur from refractory hydrocarbons under mild conditions and it can be potentially used in industrial desulfurization. Intensive research has been conducted in microbiology and molecular biology of the competent strains to increase their desulfurization activity; however, even the highest activity obtained is still insufficient to fulfill the industrial requirements. To improve the biodesulfurization efficiency, more work is needed in areas such as increasing specific desulfurization activity, hydrocarbon phase tolerance, sulfur removal at higher temperature, and isolating new strains for desulfurizing a broader range of sulfur compounds. This article comprehensively reviews and discusses key issues, advances and challenges for a competitive biodesulfurization process.

  7. Structure, preparation and properties of refractory compounds and systems

    International Nuclear Information System (INIS)

    Holleck, H.; Thuemmler, F.

    1977-01-01

    At the beginning of this report the possibilities of hardness optimization of refractory carbides are generally discussed. Three papers deal with TaC-basis refractories and hard metals. In particular, carbides with very low nonmetal/metal ratios and composites with hard phases formed by decomposition of tantalum carbonitrides are discussed. Another contribution reports investigations concerning the influence of the microstructure on the hardness of polycristaline mixed carbides. In a series of four papers, results are presented on the work of optimization conventional WC hard metals by introduction of a Fe,Co,Ni-binder: The influence of composition, carbon content and sintering conditions, as well as the wetting behaviour between carbides and binder metals are discussed. Phase relations in the refractory nitride and refractory nitride-binder metal systems as well as phase stabilities of ordered transition metal phases are reported in three papers, fundamental in character. Finally, the work concerning chemical analysis of refractory systems is described. (orig.) [de

  8. Oxidation of refractory sulfur compounds over Ti-containing mesoporous molecular sieves prepared by using a fluorosilicon compound.

    Science.gov (United States)

    Jeong, Kwang-Eun; Cho, Chin-Soo; Chae, Ho-Jeong; Kim, Chul-Ung; Jeong, Soon-Yong

    2010-05-01

    Titanium containing mesoporous molecular sieve (Ti-MMS) catalysts were studied for the oxidative desulfurization of refractory sulfur compounds. Ti-MMS catalysts were synthesized from fluorosilicon compounds and Ti with the hydrolysis reaction of H2SiF6 in an ammonia-surfactant mixed solution. The solid products were characterized by XRD, XRF, nitrogen adsorption, and diffuse reflectance UV-vis spectroscopy. Effects of Ti loading and oxidant/sulfur mole ratio, and sulfur species on ODS activity were investigated.

  9. Study of impurity composition of some compounds of refractory metals by instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Kaganov, L.K.; Dzhumakulov, D.T.; Mukhamedshina, N.M.

    1994-01-01

    The compounds of refractory transition metals find wide application in all fields of engineering, in particular in microelectronics to manufacture contact-barrier layers of thin-film current-conducting systems of silicon instruments, large and very large scale integrated circuits. Production of such materials is realted with the need to apply the analytical control methods that allow to determine a large number of elements with high reliability. The instrumental neutron-activation techniques have been developed to determine impurity composition of the following compounds: MoSi 2 , WSi 2 , TiB 2 , NbB 2 , TiC, NbC

  10. SUPPLEMENTARY INFORMATION Non-oxidative methane ...

    Indian Academy of Sciences (India)

    dell

    SUPPLEMENTARY INFORMATION. Non-oxidative methane dehydroaromatization reaction over highly active α-MoC1-x ZSM-5 derived from pretreatment. BUDDE PRADEEP KUMAR, ARVIND KUMAR SINGH and SREEDEVI UPADHYAYULA*. Heterogeneous Catalysis & Reaction Engineering Laboratory, Department of ...

  11. Identification of compounds that selectively target highly chemotherapy refractory neuroblastoma cancer stem cells.

    Science.gov (United States)

    Díaz-Carballo, David; Acikelli, Ali Haydar; Bardenheuer, Walter; Gustmann, Sebastian; Malak, Sascha; Stoll, Raphael; Kedziorski, Thorsten; Nazif, Mhd Ali; Jastrow, Holger; Wennemuth, Gunter; Dammann, Philip; Feigel, Martin; Strumberg, Dirk

    2014-09-01

    Relapse of cancer months or years after an apparently successful therapy is probably caused by cancer stem cells (CSCs) due to their intrinsic features like dormant periods, radiorefraction, and acquired multidrug resistance (MDR) phenotypes, among other mechanisms of cellular drug evasiveness. Thus, the lack of currently efficacious interventions remains a major problem in the treatment of malignancies, together with the inability of existing drugs to destroy specifically CSCs. Neuroblastomas per se are highly chemotherapy-refractory extracranial tumors in infants with very low survival rates. So far, no effective cytostatics against this kind of tumors are clinically available. Therefore, we have put much effort into the development of agents to efficiently combat this malignancy. For this purpose, we tested several compounds isolated from Cuban propolis on induced CSCs (iCSC) derived from LAN-1 neuroblastoma cells which expressed several characteristics of tumor-initiating cells both in in-vitro and in-vivo models. Some small molecules such as flavonoids and polycyclic polyprenylated acylphloroglucinols (PPAP) were isolated using successive RT-HPLC cycles and identified employing mass spectrometry and NMR spectroscopic techniques. Their cytotoxicity was first screened in sensitive cell systems by MTT proliferation assays and afterwards studied in less sensitive neuroblastoma iCSC models. We found several compounds with considerable anti-iCSC activity, most of them belonging to the PPAP class. The majority of the compounds act in a pleiotropic manner on the molecular biology of tumors although their specific targets remain unclear. Nevertheless, two substances, one of them a flavonoid, induced a strong disruption of tubulin polymerization. In addition, an unknown compound strongly inhibited replicative enzymes like toposimerases I/II and DNA polymerase. Here, we report for the first time cytotoxic activities of small molecules isolated from Caribbean propolis

  12. Refractory materials based on compounds of Mg, Zr, Si and Ca

    International Nuclear Information System (INIS)

    Drygalska, E.; Piech, J.; Szczerba, J.

    2003-01-01

    Basic refractory materials modified with zirconium oxide or calcium zirconate find application in metallurgy and ceramic industry. Fundamental raw material for ZrO 2 production is zirconia sand, while synthetic calcium zirconate is produced in reaction of zirconium oxide with calcium oxide. Regarding these facts new highly refractory composite materials CZ and DZ were obtained from mixtures of zirconia sand and limestone of dolomite. These composite materials may contain stabilised ZrO 2 and/or calcium zirconate. Among other important components are periclase and calcium orthosilicates. All these phases have high melting points (above 2000 o C). This work describes thermal and technological properties and microstructure of CZ and DZ materials. The use of calcareous raw materials (limestone and dolomite) yields materials with good hydration resistance. These composites may be used as an additive modifying properties of magnesia products. (author)

  13. Self-propagating high temperature synthesis as a method of determination of formation heat of refractory compounds

    International Nuclear Information System (INIS)

    Maslov, V.M.; Neganov, A.S.; Borovinskaya, I.P.; Merzhanov, A.G.

    1978-01-01

    Determination possibility of formation heats of refractory compounds in the process of direct synthesis from elements in a special calorimeter in the combustion regime is studied. Determined are formation heats of carbides - ZrCsub(0.92), Hf Csub(0.93), TaCsub(0.86), borides - ZrB 2 , HfB 2 NbB, NbB 2 , TaB, TaB 2 , MoB and silicides - ZrSi, ZrSi 2 , MoSi 2 . The results of chemical and x-ray phase analyses of the synthesized compounds are also given. Total error of formation heat determination methods does not surpass 2.0%

  14. Electronic computer prediction of properties of binary refractory transition metal compounds on the base of their simplificated electronic structure

    International Nuclear Information System (INIS)

    Kutolin, S.A.; Kotyukov, V.I.

    1979-01-01

    An attempt is made to obtain calculation equations of macroscopic physico-chemical properties of transition metal refractory compounds (density, melting temperature, Debye characteristic temperature, microhardness, standard formation enthalpy, thermo-emf) using the method of the regression analysis. Apart from the compound composition the argument of the regression equation is the distribution of electron bands of d-transition metals, created by the energy electron distribution in the simplified zone structure of transition metals and approximated by Chebishev polynoms, by the position of Fermi energy on the map of distribution of electron band energy depending upon the value of quasi-impulse, multiple to the first, second and third Brillouin zone for transition metals. The maximum relative error of the regressions obtained as compared with the literary data is 15-20 rel.%

  15. Environmental Effects on Non-oxide Ceramics

    Science.gov (United States)

    Jacobson, Nathan S.; Opila, Elizabeth J.

    1997-01-01

    Non-oxide ceramics such as silicon carbide (SiC) and silicon nitride (Si3N4) are promising materials for a wide range of high temperature applications. These include such diverse applications as components for heat engines, high temperature electronics, and re-entry shields for space vehicles. Table I lists a number of selected applications. Most of the emphasis here will be on SiC and Si3N4. Where appropriate, other non-oxide materials such as aluminum nitride (AlN) and boron nitride (BN) will be discussed. Proposed materials include both monolithic ceramics and composites. Composites are treated in more detail elsewhere in this volume, however, many of the oxidation/corrosion reactions discussed here can be extended to composites. In application these materials will be exposed to a wide variety of environments. Table I also lists reactive components of these environments.It is well-known that SiC and Si3N4 retain their strength to high temperatures. Thus these materials have been proposed for a variety of hot-gas-path components in combustion applications. These include heat exchanger tubes, combustor liners, and porous filters for coal combustion products. All combustion gases contain CO2, CO, H2, H2O, O2, and N2. The exact gas composition is dependent on the fuel to air ratio or equivalence ratio. (Equivalence ratio (EQ) is a fuel-to-air ratio, with total hydrocarbon content normalized to the amount of O2 and defined by EQ=1 for complete combustion to CO2 and H2O). Figure 1 is a plot of equilibrium gas composition vs. equivalence ratio. Note that as a general rule, all combustion atmospheres are about 10% water vapor and 10% CO2. The amounts of CO, H2, and O2 are highly dependent on equivalence ratio.

  16. Crystal-free Formation of Non-Oxide Optical Fiber

    Science.gov (United States)

    Nabors, Sammy A.

    2015-01-01

    Researchers at NASA Marshall Space Flight Center have devised a method for the creation of crystal-free nonoxide optical fiber preforms. Non-oxide fiber optics are extensively used in infrared transmitting applications such as communication systems, chemical sensors, and laser fiber guides for cutting, welding and medical surgery. However, some of these glasses are very susceptible to crystallization. Even small crystals can lead to light scatter and a high attenuation coefficient, limiting their usefulness. NASA has developed a new method of non-oxide fiber formation that uses axial magnetic fields to suppress crystallization. The resulting non-oxide fibers are crystal free and have lower signal attenuation rates than silica based optical fibers.

  17. Fiber Fabrication Facility for Non-Oxide and Specialty Glasses

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Unique facility for the research, development, and fabrication of non-oxide and specialty glasses and fibers in support of Navy/DoD programs.DESCRIPTION:...

  18. Non-oxidative conversion of methane into higher hydrocarbons over ...

    Indian Academy of Sciences (India)

    SOURABH MISHRA

    2017-09-27

    Sep 27, 2017 ... ... in the Design and Development of Catalysts and their Applications ... of methane (natural gas) into transportable chemicals ... molybdenum (Mo) catalyst under non-oxidative condi- ... Micromeritics ASAP 2010 apparatus at liquid nitrogen tem- ... fixed-bed tubular reactor (500 mm length & 15 mm ID) at.

  19. A rapid dissolution procedure to aid initial nuclear forensics investigations of chemically refractory compounds and particles prior to gamma spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Reading, David G., E-mail: d.reading@noc.soton.ac.uk [GAU-Radioanalytical Laboratories, Ocean and Earth Science, University of Southampton, National Oceanography Centre, European Way, Southampton SO14 3ZH (United Kingdom); Croudace, Ian W.; Warwick, Phillip E. [GAU-Radioanalytical Laboratories, Ocean and Earth Science, University of Southampton, National Oceanography Centre, European Way, Southampton SO14 3ZH (United Kingdom); Britton, Richard [AWE plc, Aldermaston, Reading, Berkshire, RG7 4PR (United Kingdom)

    2015-11-05

    A rapid and effective preparative procedure has been evaluated for the accurate determination of low-energy (40–200 keV) gamma-emitting radionuclides ({sup 210}Pb, {sup 234}Th, {sup 226}Ra, {sup 235}U) in uranium ores and uranium ore concentrates (UOCs) using high-resolution gamma ray spectrometry. The measurement of low-energy gamma photons is complicated in heterogeneous samples containing high-density mineral phases and in such situations activity concentrations will be underestimated. This is because attenuation corrections, calculated based on sample mean density, do not properly correct where dense grains are dispersed within a less dense matrix (analogous to a nugget effect). The current method overcomes these problems using a lithium tetraborate fusion that readily dissolves all components including high-density, self-attenuating minerals/compounds. This is the ideal method for dissolving complex, non-volatile components in soils, rocks, mineral concentrates, and other materials where density reduction is required. Lithium borate fusion avoids the need for theoretical efficiency corrections or measurement of matrix matched calibration standards. The resulting homogeneous quenched glass produced can be quickly dissolved in nitric acid producing low-density solutions that can be counted by gamma spectrometry. The effectiveness of the technique is demonstrated using uranium-bearing Certified Reference Materials and provides accurate activity concentration determinations compared to the underestimated activity concentrations derived from direct measurements of a bulk sample. The procedure offers an effective solution for initial nuclear forensic studies where complex refractory minerals or matrices exist. It is also significantly faster, safer and simpler than alternative approaches. - Highlights: • Low energy gamma photons (<200 keV) are attenuated in U-bearing compounds. • Corrections based on bulk density do not yield accurate activity

  20. Technological pretreatment of the synchysite non-oxidized ore

    Science.gov (United States)

    Munkhtsetseg, B.; Burmaa, G.

    2013-06-01

    Mongolia has rich deposits of rare, precious, and poly-metallic ores. Nowadays, it is important to research separation of rare earth elements oxides concentrates from the ores, analyze their unique physical chemical characteristics, and purified it. Our investigation on raw materials focuses on rare earth non-oxidized ores. Main mineral in this rock sample is Synchysite (LnCa(CO3)2F. We did technological and thermal pretreatment: direct sulphurization (H2SO4), sulphurization with subsequent roasting (800°C+H2SO4), sulphurization prior to roasting (H2SO4+650°C). Sulphurization method based on dissolution of rare earth mineral into sulfuric acid (93%) according to the reaction. The amount of rare earth element oxides is almost 10 times greater (29.16%) after direct sulphurization process, almost 8 times greater (21.14%) after sulphurization with subsequent roasting, and almost 20 times greater (44.62%) after sulphurization prior to roasting process. After those technological pretreatment raw material's micro elements Thorium and Uranium contents are reduced as follows: H2SO4>800°C+H2SO4>H2SO4+650°C. These results show that cerium group rare earth elements have very good solubility in water at +2°C temperature and decreasing micro elements content uranium and thorium good pretreatment condition is prior to roasting (H2SO4+650°C) of synchysite non-oxidized ore.

  1. Refractory vasculitis

    NARCIS (Netherlands)

    Rutgers, Bram; Kallenberg, Cees G. M.

    Refractory vasculitis occurs in 4-5% of patients with anti-neutrophil cytoplasmic antibody associated vasculitis (AAV). Differences between therapies used for refractory disease are mostly reflected in the percentages of complete and partial remissions, but also in the number of serious side

  2. Upgrading non-oxidized carbon nanotubes by thermally decomposed hydrazine

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Pen-Cheng, E-mail: wangpc@ess.nthu.edu.tw [Department of Engineering and System Science, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Graduate Program for Science and Technology of Synchrotron Light Source, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Liao, Yu-Chun [Department of Engineering and System Science, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Graduate Program for Science and Technology of Synchrotron Light Source, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); National Synchrotron Radiation Research Center, 101 Hsin-Ann Road, Hsinchu Science Park, Hsinchu 30076, Taiwan (China); Liu, Li-Hung [Department of Engineering and System Science, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Lai, Yu-Ling; Lin, Ying-Chang [National Synchrotron Radiation Research Center, 101 Hsin-Ann Road, Hsinchu Science Park, Hsinchu 30076, Taiwan (China); Hsu, Yao-Jane [Graduate Program for Science and Technology of Synchrotron Light Source, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); National Synchrotron Radiation Research Center, 101 Hsin-Ann Road, Hsinchu Science Park, Hsinchu 30076, Taiwan (China)

    2014-06-01

    We found that the electrical properties of conductive thin films based on non-oxidized carbon nanotubes (CNTs) could be further improved when the CNTs consecutively underwent a mild hydrazine adsorption treatment and then a sufficiently effective thermal desorption treatment. We also found that, after several rounds of vapor-phase hydrazine treatments and baking treatments were applied to an inferior single-CNT field-effect transistor device, the device showed improvement in I{sub on}/I{sub off} ratio and reduction in the extent of gate-sweeping hysteresis. Our experimental results indicate that, even though hydrazine is a well-known reducing agent, the characteristics of our hydrazine-exposed CNT samples subject to certain treatment conditions could become more graphenic than graphanic, suggesting that the improvement in the electrical and electronic properties of CNT samples could be related to the transient bonding and chemical scavenging of thermally decomposed hydrazine on the surface of CNTs.

  3. Upgrading non-oxidized carbon nanotubes by thermally decomposed hydrazine

    Science.gov (United States)

    Wang, Pen-Cheng; Liao, Yu-Chun; Liu, Li-Hung; Lai, Yu-Ling; Lin, Ying-Chang; Hsu, Yao-Jane

    2014-06-01

    We found that the electrical properties of conductive thin films based on non-oxidized carbon nanotubes (CNTs) could be further improved when the CNTs consecutively underwent a mild hydrazine adsorption treatment and then a sufficiently effective thermal desorption treatment. We also found that, after several rounds of vapor-phase hydrazine treatments and baking treatments were applied to an inferior single-CNT field-effect transistor device, the device showed improvement in Ion/Ioff ratio and reduction in the extent of gate-sweeping hysteresis. Our experimental results indicate that, even though hydrazine is a well-known reducing agent, the characteristics of our hydrazine-exposed CNT samples subject to certain treatment conditions could become more graphenic than graphanic, suggesting that the improvement in the electrical and electronic properties of CNT samples could be related to the transient bonding and chemical scavenging of thermally decomposed hydrazine on the surface of CNTs.

  4. Exposure to lead in water and cysteine non-oxidative metabolism in Pelophylax ridibundus tissues

    International Nuclear Information System (INIS)

    Kaczor, Marta; Sura, Piotr; Bronowicka-Adamska, Patrycja; Wróbel, Maria

    2013-01-01

    Chronic, low-level exposure to metals is an increasing global problem. Lead is an environmentally persistent toxin that causes many lead-related pathologies, directly affects tissues and cellular components or exerts an effect of the generation of reactive oxygen species causing a diminished level of available sulfhydryl antioxidant reserves. Cysteine is one of substrates in the synthesis of glutathione – the most important cellular antioxidant, and it may also undergo non-oxidative desulfuration that produces compounds containing sulfane sulfur atoms. The aim of the experiment was to examine changes of the non-oxidative metabolism of cysteine and the levels of cysteine and glutathione in the kidneys, heart, brain, liver and muscle of Marsh frogs (Pelophylax ridibundus) exposed to 28 mg/L Pb(NO 3 ) 2 for 10 days. The activities of sulfurtransferases, enzymes related to the sulfane sulfur metabolism – 3-mercaptopyruvate sulfurtransfearse, γ-cystathionase and rhodanese – were detected in tissue homogenates. The activity of sulfurtransferases was much higher in the kidneys of frogs exposed to lead in comparison to control frogs, not exposed to lead. The level of sulfane sulfur remained unchanged. Similarly, the total level of cysteine did not change significantly. The total levels of glutathione and the cysteine/cystine and GSH/GSSG ratios were elevated. Thus, it seems that the exposure to lead intensified the metabolism of sulfane sulfur and glutathione synthesis in the kidneys. The results presented in this work not only confirm the participation of GSH in the detoxification of lead ions and/or products appearing in response to their presence, such as reactive oxygen species, but also indicate the involvement of sulfane sulfur and rhodanese in this process (e.g. brain). As long as the expression of enzymatic proteins (rhodanese, MPST and CST) is not examined, no answer will be provided to the question whether changes in their activity are due to differences

  5. Exposure to lead in water and cysteine non-oxidative metabolism in Pelophylax ridibundus tissues

    Energy Technology Data Exchange (ETDEWEB)

    Kaczor, Marta [Jagiellonian University Medical College, Kopernika 7, 31-034 Krakow (Poland); Sura, Piotr [Department of Human Developmental Biology, Jagiellonian University Medical College, Kopernika 7, 31-034 Krakow (Poland); Bronowicka-Adamska, Patrycja [Jagiellonian University Medical College, Kopernika 7, 31-034 Krakow (Poland); Wrobel, Maria, E-mail: mbwrobel@cyf-kr.edu.pl [Jagiellonian University Medical College, Kopernika 7, 31-034 Krakow (Poland)

    2013-02-15

    Chronic, low-level exposure to metals is an increasing global problem. Lead is an environmentally persistent toxin that causes many lead-related pathologies, directly affects tissues and cellular components or exerts an effect of the generation of reactive oxygen species causing a diminished level of available sulfhydryl antioxidant reserves. Cysteine is one of substrates in the synthesis of glutathione - the most important cellular antioxidant, and it may also undergo non-oxidative desulfuration that produces compounds containing sulfane sulfur atoms. The aim of the experiment was to examine changes of the non-oxidative metabolism of cysteine and the levels of cysteine and glutathione in the kidneys, heart, brain, liver and muscle of Marsh frogs (Pelophylax ridibundus) exposed to 28 mg/L Pb(NO{sub 3}){sub 2} for 10 days. The activities of sulfurtransferases, enzymes related to the sulfane sulfur metabolism - 3-mercaptopyruvate sulfurtransfearse, {gamma}-cystathionase and rhodanese - were detected in tissue homogenates. The activity of sulfurtransferases was much higher in the kidneys of frogs exposed to lead in comparison to control frogs, not exposed to lead. The level of sulfane sulfur remained unchanged. Similarly, the total level of cysteine did not change significantly. The total levels of glutathione and the cysteine/cystine and GSH/GSSG ratios were elevated. Thus, it seems that the exposure to lead intensified the metabolism of sulfane sulfur and glutathione synthesis in the kidneys. The results presented in this work not only confirm the participation of GSH in the detoxification of lead ions and/or products appearing in response to their presence, such as reactive oxygen species, but also indicate the involvement of sulfane sulfur and rhodanese in this process (e.g. brain). As long as the expression of enzymatic proteins (rhodanese, MPST and CST) is not examined, no answer will be provided to the question whether changes in their activity are due to

  6. Self-consistent electronic structure of the refractory metal ZrB2, a pseudographite intercalation compound

    International Nuclear Information System (INIS)

    Johnson, D.L.; Harmon, B.N.; Liu, S.H.

    1980-01-01

    The self-consistent band structure of ZrB 2 has been evaluated using the KKR method. It is noted that a large charge transfer is not necessary to explain many of the experimental results which can be understood in terms of the band structure and the bonding nature of the wave functions. X-ray photoemission spectra and optical reflectance measurements are compared with the calculated density of states and joint density of states, respectively. The calculations are also discussed with reference to nuclear quadrupole experiments, Hall effect measurements, and the electronic specific heat. The similarities to intercalated graphite and related compounds are discussed and the strong bonding as reflected in the hardness and high melting point is considered

  7. Polymer derived non-oxide ceramics modified with late transition metals.

    Science.gov (United States)

    Zaheer, Muhammad; Schmalz, Thomas; Motz, Günter; Kempe, Rhett

    2012-08-07

    This tutorial review highlights the methods for the preparation of metal modified precursor derived ceramics (PDCs) and concentrates on the rare non-oxide systems enhanced with late transition metals. In addition to the main synthetic strategies for modified SiC and SiCN ceramics, an overview of the morphologies, structures and compositions of both, ceramic materials and metal (nano) particles, is presented. Potential magnetic and catalytic applications have been discussed for the so manufactured metal containing non-oxide ceramics.

  8. Non-oxidative and oxidative torrefaction characterization and SEM observations of fibrous and ligneous biomass

    International Nuclear Information System (INIS)

    Chen, Wei-Hsin; Lu, Ke-Miao; Lee, Wen-Jhy; Liu, Shih-Hsien; Lin, Ta-Chang

    2014-01-01

    Highlights: • Non-oxidative and oxidative torrefaction of biomass is studied. • Two fibrous biomasses and two ligneous biomasses are tested. • SEM observations of four biomasses are provided. • Fibrous biomass is more sensitive to O 2 concentration than ligneous biomass. • The performance of non-oxidative torrefaction is better than that of oxidative torrefaction. - Abstract: Oxidative torrefaction is a method to reduce the operating cost of upgrading biomass. To understand the potential of oxidative torrefaction and its impact on the internal structure of biomass, non-oxidative and oxidative torrefaction of two fibrous biomass materials (oil palm fiber and coconut fiber) and two ligneous ones (eucalyptus and Cryptomeria japonica) at 300 °C for 1 h are studied and compared with each other. Scanning electron microscope (SEM) observations are also performed to explore the impact of torrefaction atmosphere on the lignocellulosic structure of biomass. The results indicate that the fibrous biomass is more sensitive to O 2 concentration than the ligneous biomass. In oxidative torrefaction, an increase in O 2 concentration decreases the solid yield. The energy yield is linearly proportional to the solid yield, which is opposite to the behavior of non-oxidative torrefaction. The performance of non-oxidative torrefaction is better than that of oxidative torrefaction. As a whole, ligneous biomass can be torrefied in oxidative environments at lower O 2 concentrations, whereas fibrous biomass is more suitable for non-oxidative torrefaction

  9. Nonoxidized, biologically active parathyroid hormone determines mortality in hemodialysis patients

    DEFF Research Database (Denmark)

    Tepel, Martin; Armbruster, Franz Paul; Grön, Hans Jürgen

    2013-01-01

    Background: It was shown that nonoxidized PTH (n-oxPTH) is bioactive, whereas the oxidation of PTH results in a loss of biological activity. Methods: In this study we analyzed the association of n-oxPTH on mortality in hemodialysis patients using a recently developed assay system. Results......: Hemodialysis patients (224 men, 116 women) had a median age of 66 years. One hundred seventy patients (50%) died during the follow-up period of 5 years. Median n-oxPTH levels were higher in survivors (7.2 ng/L) compared with deceased patients (5.0 ng/L; P = .002). Survival analysis showed an increased survival...... in the highest n-oxPTH tertile compared with the lowest n-oxPTH tertile (χ(2), 14.3; P = .0008). Median survival was 1702 days in the highest n-oxPTH tertile, whereas it was only 453 days in the lowest n-oxPTH tertile. Multivariable-adjusted Cox regression showed that higher age increased odds for death, whereas...

  10. Nonoxidative free fatty acid disposal is greater in young women than men.

    Science.gov (United States)

    Koutsari, Christina; Basu, Rita; Rizza, Robert A; Nair, K Sreekumaran; Khosla, Sundeep; Jensen, Michael D

    2011-02-01

    Large increases in systemic free fatty acid (FFA) availability in the absence of a corresponding increase in fatty acid oxidation can create a host of metabolic abnormalities. These adverse responses are thought to be the result of fatty acids being shunted into hepatic very low-density lipoprotein-triglyceride production and/or intracellular lipid storage and signaling pathways because tissues are forced to increase nonoxidative FFA disposal. The objective of the study was to examine whether variations in postabsorptive nonoxidative FFA disposal within the usual range predict insulin resistance and hypertriglyceridemia. We measured: systemic FFA turnover using a continuous iv infusion of [9-10, (3)H]palmitate; substrate oxidation with indirect calorimetry combined with urinary nitrogen excretion; whole-body and peripheral insulin sensitivity with the labeled iv glucose tolerance test minimal model. the study was conducted at the Mayo Clinic General Clinical Research Center. Participants included healthy, postabsorptive, nonobese adults (21 women and 21 men). There were no interventions. Nonoxidative FFA disposal (micromoles per minute), defined as the FFA disappearance rate minus fatty acid oxidation. Women had 64% greater nonoxidative FFA disposal rate than men but a better lipid profile and similar insulin sensitivity. There was no significant correlation between nonoxidative FFA disposal and whole-body sensitivity, peripheral insulin sensitivity, or fasting serum triglyceride concentrations in men or women. Healthy nonobese women have greater rates of nonoxidative FFA disposal than men, but this does not appear to relate to adverse health consequences. Understanding the sex-specific interaction between adipose tissue lipolysis and peripheral FFA removal will help to discover new approaches to treat FFA-induced abnormalities.

  11. Ambient Pressure Hydrodesulfurization of Refractory Sulfur Compounds in Highly Sensitive μ-Reactor Platform Coupled to a Time-of-Flight Mass Spectrometer

    DEFF Research Database (Denmark)

    Christoffersen, Ann-Louise N.; Bodin, Anders; Elkjær, Christian F.

    2018-01-01

    the refractory sulfur from different petroleum streams mostly found in the form of the alkyl-substituted dibenzothiophenes (β-DBTs). In this work we demonstrate how a setup dedicated to testing minute amounts (nanogram) of well-defined catalytic systems in μ-reactors can be used in the gas-phase HDS of the model...

  12. Refractory metal based superalloys

    International Nuclear Information System (INIS)

    Alonso, Paula R.; Vicente, Eduardo E.; Rubiolo, Gerardo H.

    1999-01-01

    Refractory metals are looked as promising materials for primary circuits in fission reactors and even as fusion reactor components. Indeed, superalloys could be developed which take advantage of their high temperature properties together with the benefits of a two- phase (intermetallic compound-refractory metal matrix) coherent structure. In 1993, researchers of the Office National d'Etudes et de Recherches Aerospatiales of France reported the observation of such a coherent structure in the Ta-Ti-Zr-Al-Nb-Mo system although the exact composition is not reported. The intermetallic compound would be Ti 2 AlMo based. However, the formation of this compound and its possible coexistence with a disordered bcc phase in the ternary system Ti-Al-Mo is a controversial subject in the related literature. In this work we develop a technique to obtain homogeneous alloys samples with 50 Ti-25 Al-25 Mo composition. The resulting specimens were characterized by optical and electronic metallography (SEM), microprobe composition measurements (EPMA) and X-ray diffraction (XRD) analyses. The results show the evidence for a bcc (A2→B2) ordering reaction in the Ti-Al-Mo system in the 50 Ti-25 Al-25 Mo composition. (author)

  13. Microbially-mediated method for synthesis of non-oxide semiconductor nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Phelps, Tommy J.; Lauf, Robert J.; Moon, Ji-Won; Rondinone, Adam Justin; Love, Lonnie J.; Duty, Chad Edward; Madden, Andrew Stephen; Li, Yiliang; Ivanov, Ilia N.; Rawn, Claudia Jeanette

    2017-09-19

    The invention is directed to a method for producing non-oxide semiconductor nanoparticles, the method comprising: (a) subjecting a combination of reaction components to conditions conducive to microbially-mediated formation of non-oxide semiconductor nanoparticles, wherein said combination of reaction components comprises i) anaerobic microbes, ii) a culture medium suitable for sustaining said anaerobic microbes, iii) a metal component comprising at least one type of metal ion, iv) a non-metal component comprising at least one non-metal selected from the group consisting of S, Se, Te, and As, and v) one or more electron donors that provide donatable electrons to said anaerobic microbes during consumption of the electron donor by said anaerobic microbes; and (b) isolating said non-oxide semiconductor nanoparticles, which contain at least one of said metal ions and at least one of said non-metals. The invention is also directed to non-oxide semiconductor nanoparticle compositions produced as above and having distinctive properties.

  14. Microbially-mediated method for synthesis of non-oxide semiconductor nanoparticles

    Science.gov (United States)

    Phelps, Tommy J.; Lauf, Robert J.; Moon, Ji Won; Rondinone, Adam J.; Love, Lonnie J.; Duty, Chad Edward; Madden, Andrew Stephen; Li, Yiliang; Ivanov, Ilia N.; Rawn, Claudia Jeanette

    2014-06-24

    The invention is directed to a method for producing non-oxide semiconductor nanoparticles, the method comprising: (a) subjecting a combination of reaction components to conditions conducive to microbially-mediated formation of non-oxide semiconductor nanoparticles, wherein said combination of reaction components comprises i) anaerobic microbes, ii) a culture medium suitable for sustaining said anaerobic microbes, iii) a metal component comprising at least one type of metal ion, iv) a non-metal component containing at least one non-metal selected from the group consisting of S, Se, Te, and As, and v) one or more electron donors that provide donatable electrons to said anaerobic microbes during consumption of the electron donor by said anaerobic microbes; and (b) isolating said non-oxide semiconductor nanoparticles, which contain at least one of said metal ions and at least one of said non-metals. The invention is also directed to non-oxide semiconductor nanoparticle compositions produced as above and having distinctive properties.

  15. Brain nonoxidative carbohydrate consumption is not explained by export of an unknown carbon source

    DEFF Research Database (Denmark)

    Rasmussen, Peter; Nyberg, Nils; Jaroszewski, Jerzy W

    2010-01-01

    Brain activation provokes nonoxidative carbohydrate consumption and during exercise it is dominated by the cerebral uptake of lactate resulting in that up to approximately 1 mmol/ 100 g of glucose equivalents cannot be accounted for by cerebral oxygen uptake. The fate of this 'extra' carbohydrate...... be accounted for by changes in the NMR-derived plasma metabolome across the brain.Journal of Cerebral Blood Flow & Metabolism advance online publication, 24 February 2010; doi:10.1038/jcbfm.2010.25....

  16. High alumina refractories

    International Nuclear Information System (INIS)

    Simao, L.C.; Lopes, A.B.; Galvao Filho, N.B.; Souza, R.B. de

    1989-01-01

    High alumina refractories with 92 to 96.5% Al 2 O 3 were produced using brown and white fused as aggregate. Those refractories present only alumina-α and mullite as crystalline mineralogical phase. Other physical and chemical characteristics are similar to the ones found in refractories produced in Brazil, Japan and U.S.A. The most important physical and chemical tests used for the characterization of the raw materials and refractories, complemented by those realized at high temperatures, plus X-ray Difractometry and optical microscopy are presented, besides the refractory formulation and main parameters of production [pt

  17. Non-oxidic nanoscale composites: single-crystalline titanium carbide nanocubes in hierarchical porous carbon monoliths.

    Science.gov (United States)

    Sonnenburg, Kirstin; Smarsly, Bernd M; Brezesinski, Torsten

    2009-05-07

    We report the preparation of nanoscale carbon-titanium carbide composites with carbide contents of up to 80 wt%. The synthesis yields single-crystalline TiC nanocubes 20-30 nm in diameter embedded in a hierarchical porous carbon matrix. These composites were generated in the form of cylindrical monoliths but can be produced in various shapes using modern sol-gel and nanocasting methods in conjunction with carbothermal reduction. The monolithic material is characterized by a combination of microscopy, diffraction and physisorption. Overall, the results presented in this work represent a concrete design template for the synthesis of non-oxidic nanoscale composites with high surface areas.

  18. Influence of fuel composition on the non-oxidizing heating of steel in a waste gas atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Minkler, W [LOI Industrieofenanlagen G.m.b.H., Essen (Germany, F.R.)

    1979-04-01

    On the basis of a number of graphs and data on theoretical combustion temperatures and the difference between the heating value of the fuel and the waste gas in respect of 1 m/sup 3/ of waste gas, the author demonstrates the influence of fuel composition on the non-oxidizing heating of steel in a waste gas atmosphere derived from five different fuels. A rotary-hearth furnace is described for the non-oxidizing heating of pressings from plain carbon and alloy steel.

  19. Metabolic basis of ethanol-induced cytotoxicity in recombinant HepG2 cells: Role of nonoxidative metabolism

    International Nuclear Information System (INIS)

    Wu Hai; Cai Ping; Clemens, Dahn L.; Jerrells, Thomas R.; Ansari, G.A. Shakeel; Kaphalia, Bhupendra S.

    2006-01-01

    Chronic alcohol abuse, a major health problem, causes liver and pancreatic diseases and is known to impair hepatic alcohol dehydrogenase (ADH). Hepatic ADH-catalyzed oxidation of ethanol is a major pathway for the ethanol disposition in the body. Hepatic microsomal cytochrome P450 (CYP2E1), induced in chronic alcohol abuse, is also reported to oxidize ethanol. However, impaired hepatic ADH activity in a rat model is known to facilitate a nonoxidative metabolism resulting in formation of nonoxidative metabolites of ethanol such as fatty acid ethyl esters (FAEEs) via a nonoxidative pathway catalyzed by FAEE synthase. Therefore, the metabolic basis of ethanol-induced cytotoxicity was determined in HepG2 cells and recombinant HepG2 cells transfected with ADH (VA-13), CYP2E1 (E47) or ADH + CYP2E1 (VL-17A). Western blot analysis shows ADH deficiency in HepG2 and E47 cells, compared to ADH-overexpressed VA-13 and VL-17A cells. Attached HepG2 cells and the recombinant cells were incubated with ethanol, and nonoxidative metabolism of ethanol was determined by measuring the formation of FAEEs. Significantly higher levels of FAEEs were synthesized in HepG2 and E47 cells than in VA-13 and VL-17A cells at all concentrations of ethanol (100-800 mg%) incubated for 6 h (optimal time for the synthesis of FAEEs) in cell culture. These results suggest that ADH-catalyzed oxidative metabolism of ethanol is the major mechanism of its disposition, regardless of CYP2E1 overexpression. On the other hand, diminished ADH activity facilitates nonoxidative metabolism of ethanol to FAEEs as found in E47 cells, regardless of CYP2E1 overexpression. Therefore, CYP2E1-mediated oxidation of ethanol could be a minor mechanism of ethanol disposition. Further studies conducted only in HepG2 and VA-13 cells showed lower ethanol disposition and ATP concentration and higher accumulation of neutral lipids and cytotoxicity (apoptosis) in HepG2 cells than in VA-13 cells. The apoptosis observed in HepG2 vs

  20. Refractory bin for burning

    Energy Technology Data Exchange (ETDEWEB)

    McPherson, D.L.; McPherson, T.L.

    1989-12-26

    This patent describes a refractory bin. It has a generally rectangular horizontal cross sectional configuration. It has wall structures each comprising an upper and a lower pair of elongated horizontal vertically spaced generally parallel support beams each having a vertical flange defining a support edge along its upper surface, a first generally rectangular refractory panel arranged with its lower edge at the bottom of the bin and with its outer surface in flat face contacting relation with the vertical flanges of the lower pair of support beams, a plurality of brackets each having a horizontal part and a vertical part and being secured to the outer surface of the first refractory panel.

  1. Refractoriness in human atria

    DEFF Research Database (Denmark)

    Skibsbye, Lasse; Jespersen, Thomas; Christ, Torsten

    2016-01-01

    BACKGROUND: Refractoriness of cardiac cells limits maximum frequency of electrical activity and protects the heart from tonic contractions. Short refractory periods support major arrhythmogenic substrates and augmentation of refractoriness is therefore seen as a main mechanism of antiarrhythmic...... drugs. Cardiomyocyte excitability depends on availability of sodium channels, which involves both time- and voltage-dependent recovery from inactivation. This study therefore aims to characterise how sodium channel inactivation affects refractoriness in human atria. METHODS AND RESULTS: Steady......-state activation and inactivation parameters of sodium channels measured in vitro in isolated human atrial cardiomyocytes were used to parameterise a mathematical human atrial cell model. Action potential data were acquired from human atrial trabeculae of patients in either sinus rhythm or chronic atrial...

  2. Colectomy for refractory constipation

    DEFF Research Database (Denmark)

    Raahave, Dennis; Loud, Franck Bjørn; Christensen, Elsebeth

    2010-01-01

    OBJECTIVE: This study evaluated the type of colectomy, postoperative complications, functional results, and satisfaction in patients with constipation refractory to conservative therapy. Further, colonic transit time (CTT), faecal load (coprostasis), and colon length (redundancies) were compared ...

  3. Skeletal muscle insulin signaling defects downstream of phosphatidylinositol 3-kinase at the level of akt are associated with impaired nonoxidative glucose disposal in HIV lipodystrophy

    DEFF Research Database (Denmark)

    Haugaard, Steen B.; Andersen, Ove; Madsbad, Sten

    2005-01-01

    More than 40% of HIV-infected patients on highly active antiretroviral therapy (HAART) experience fat redistribution (lipodystrophy), a syndrome associated with insulin resistance primarily affecting insulin-stimulated nonoxidative glucose metabolism (NOGM(ins)). Skeletal muscle biopsies, obtained...

  4. Simultaneous determination of ethanol's four types of non-oxidative metabolites in human whole blood by liquid chromatography tandem mass spectrometry

    DEFF Research Database (Denmark)

    Zhang, Xinyu; Zheng, Feng; Lin, Zebin

    2017-01-01

    The importance of ethanol non-oxidative metabolites as the specific biomarkers of alcohol consumption in clinical and forensic settings is increasingly acknowledged. Simultaneous determination of these metabolites can provide a wealth of information like drinking habit and history, but it was dif......The importance of ethanol non-oxidative metabolites as the specific biomarkers of alcohol consumption in clinical and forensic settings is increasingly acknowledged. Simultaneous determination of these metabolites can provide a wealth of information like drinking habit and history...

  5. Refractory Materials for Flame Deflector Protection System Corrosion Control: Refractory Ceramics Literature Survey

    Science.gov (United States)

    Calle, Luz Marina; Hintze, Paul E.; Parlier, Christopher R.; Curran, Jerome P.; Kolody, Mark; Perusich, Stephen; Whitten, Mary C.; Trejo, David; Zidek, Jason; Sampson, Jeffrey W.; hide

    2009-01-01

    Ceramics can be defmed as a material consisting of hard brittle properties produced from inorganic and nonmetallic minerals made by firing at high temperatures. These materials are compounds between metallic and nonmetallic elements and are either totally ionic, or predominately ionic but having some covalent character. This definition allows for a large range of materials, not all applicable to refractory applications. As this report is focused on potential ceramic materials for high temperature, aggressive exposure applications, the ceramics reviewed as part of this report will focus on refractory ceramics specifically designed and used for these applications. Ceramic materials consist of a wide variety of products. Callister (2000) 1 characterized ceramic materials into six classifications: glasses, clay products, refractories, cements, abrasives, and advanced ceramics. Figure 1 shows this classification system. This review will focus mainly on refractory ceramics and cements as in general, the other classifications are neither applicable nor economical for use in large structures such as the flame trench. Although much work has been done in advanced ceramics over the past decade or so, these materials are likely cost prohibitive and would have to be fabricated off-site, transported to the NASA facilities, and installed, which make these even less feasible. Although the authors reviewed the literature on advanced ceramic refractories 2 center dot 3 center dot 4 center dot 5 center dot 6 center dot 7 center dot 8 center dot 9 center dot 10 center dot 11 center dot 12 after the review it was concluded that these materials should not be ' the focus of this report. A review is in progress on materials and systems for prefabricated refractory ceramic panels, but this review is focusing more on typical refractory materials for prefabricated systems, which could make the system more economically feasible. Refractory ceramics are used for a wide variety of applications

  6. Exfoliation of non-oxidized graphene flakes for scalable conductive film.

    Science.gov (United States)

    Park, Kwang Hyun; Kim, Bo Hyun; Song, Sung Ho; Kwon, Jiyoung; Kong, Byung Seon; Kang, Kisuk; Jeon, Seokwoo

    2012-06-13

    The increasing demand for graphene has required a new route for its mass production without causing extreme damages. Here we demonstrate a simple and cost-effective intercalation based exfoliation method for preparing high quality graphene flakes, which form a stable dispersion in organic solvents without any functionalization and surfactant. Successful intercalation of alkali metal between graphite interlayers through liquid-state diffusion from ternary KCl-NaCl-ZnCl(2) eutectic system is confirmed by X-ray diffraction and X-ray photoelectric spectroscopy. Chemical composition and morphology analyses prove that the graphene flakes preserve their intrinsic properties without any degradation. The graphene flakes remain dispersed in a mixture of pyridine and salts for more than 6 months. We apply these results to produce transparent conducting (∼930 Ω/□ at ∼75% transmission) graphene films using the modified Langmuir-Blodgett method. The overall results suggest that our method can be a scalable (>1 g/batch) and economical route for the synthesis of nonoxidized graphene flakes.

  7. An engineered non-oxidative glycolysis pathway for acetone production in Escherichia coli.

    Science.gov (United States)

    Yang, Xiaoyan; Yuan, Qianqian; Zheng, Yangyang; Ma, Hongwu; Chen, Tao; Zhao, Xueming

    2016-08-01

    To find new metabolic engineering strategies to improve the yield of acetone in Escherichia coli. Results of flux balance analysis from a modified Escherichia coli genome-scale metabolic network suggested that the introduction of a non-oxidative glycolysis (NOG) pathway would improve the theoretical acetone yield from 1 to 1.5 mol acetone/mol glucose. By inserting the fxpk gene encoding phosphoketolase from Bifidobacterium adolescentis into the genome, we constructed a NOG pathway in E.coli. The resulting strain produced 47 mM acetone from glucose under aerobic conditions in shake-flasks. The yield of acetone was improved from 0.38 to 0.47 mol acetone/mol glucose which is a significant over the parent strain. Guided by computational analysis of metabolic networks, we introduced a NOG pathway into E. coli and increased the yield of acetone, which demonstrates the importance of modeling analysis for the novel metabolic engineering strategies.

  8. Droplet size prediction in ultrasonic nebulization for non-oxide ceramic powder synthesis.

    Science.gov (United States)

    Muñoz, Mariana; Goutier, Simon; Foucaud, Sylvie; Mariaux, Gilles; Poirier, Thierry

    2018-03-01

    Spray pyrolysis process has been used for the synthesis of non-oxide ceramic powders from liquid precursors in the Si/C/N system. Particles with a high thermal stability and with variable composition and size distribution have been obtained. In this process, the mechanisms involved in precursor decomposition and gas phase recombination of species are still unknown. The final aim of this work consists in improving the whole process comprehension by an experimental/modelling approach that helps to connect the synthesized particles characteristics to the precursor properties and process operating parameters. It includes the following steps: aerosol formation by a piezoelectric nebulizer, its transport and the chemical-physical phenomena involved in the reaction processes. This paper focuses on the aerosol characterization to understand the relationship between the liquid precursor properties and the liquid droplet diameter distribution. Liquids with properties close to the precursor of interest (hexamethyldisilazane) have been used. Experiments have been performed using a shadowgraphy technique to determine the drop size distribution of the aerosol. For all operating parameters of the nebulizer device and liquids used, bimodal droplet size distributions have been obtained. Correlations proposed in the literature for the droplet size prediction by ultrasonic nebulization were used and adapted to the specific nebulizer device used in this study, showing rather good agreement with experimental values. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Uranium mobility in non-oxidizing brines: field and experimental evidence

    International Nuclear Information System (INIS)

    Giblin, A.M.; Appleyard, E.C.

    1987-01-01

    The present distribution of U in the Wollaston Sediments in Saskatchewan can be related to the movement of brines as revealed in Na-Ca-Mg-Cl-metasomes. Experiments were conducted at 60 and 200 0 C under stringently non-oxidizing conditions using solvents ranging from distilled water to a Ca-Na-K brine formulated to simulate the major element composition of the Salton Sea geothermal brines. The experiments were conducted on natural pitchblende (UOsub(2.67)) and synthetic uraninite (UOsub(2.01)). Natural pitchblende was more strongly dissolved than the synthetic uraninite, and the synthetic Salton Sea brine was a more potent solvent than distilled water, 1:4 diluted Salton Sea brine, or pure NaCl brine. Within analytical limits of detection the dissolved U is present in the uranous (U 4+ ) state. The evidence demonstrates empirically the mechanism of dissolution of naturally occurring U minerals in reduced brines and describes a geological case where this appears to have happened. (author)

  10. Spinning of refractory metals

    International Nuclear Information System (INIS)

    Chang Wenkua; Zheng Han

    1989-01-01

    The effects of spinning process parameters including max. pass percentage reduction, spinning temperature, feed rate, lubricant and annealing technology on the quality of shaped components are summarized and discussed in the present paper. The above mentioned parameters are adopted in the process of spinning of barrel-shaped and specially shaped components of refractory metals and their alloys W, Mo, Nb, Zr, TZM molybdenum alloy, C-103, C-752 niobium alloy etc. The cause of leading to usual defects of spun products of refractory metals such as lamellar as 'scaling', crack, swelling, wrinkle, etc. have been analysed and the ways to eliminate the defects have been put forward. 8 figs., 5 tabs. (Author)

  11. Super Refractory Status Epilepticus

    African Journals Online (AJOL)

    user

    et al did retrospective cohort study from 1 January st. 1994 to 31 March 1998 at Presbyterian Medical. Centre in Columbia, to determine the frequency, risk factors and impact on the outcome of RSE. They found out that 69% of seizures recurred after. Key Words: Super refractory status epilepticus, Zambia. Medical Journal of ...

  12. Plasma deposition of refractories

    International Nuclear Information System (INIS)

    Kudinov, V.V.; Ivanov, V.M.

    1981-01-01

    The problems of deposition, testing and application of plasma coating of refractory metals and oxides are considered. The process fundamentals, various manufacturing procedures and equipment for their realization are described in detail. Coating materials are given (Al, Mg, Al 2 O 3 , ZrO 2 , MgAlO 4 ) which are used in reactor engineering and their designated purposes are shown [ru

  13. Sustained nonoxidative glucose utilization and depletion of glycogen in reperfused canine myocardium

    International Nuclear Information System (INIS)

    Schwaiger, M.; Neese, R.A.; Araujo, L.

    1989-01-01

    Ischemically injured reperfused myocardium is characterized by increased 18F-fluorodeoxyglucose uptake as demonstrated by positron emission tomography. To elucidate the metabolic fate of exogenous glucose entering reperfused myocardium, D-[6-14C] glucose and L-[U-13C] lactate were used to determine glucose uptake, glucose oxidation and the contribution of exogenous glucose to lactate production. The pathologic model under investigation consisted of a 3 h balloon occlusion of the left anterior descending coronary artery followed by 24 h of reperfusion in canine myocardium. The extent and severity of myocardial injury after the ischemia and reperfusion were assessed by histochemical evaluation (triphenyltetrazolium chloride and periodic acid-Schiff stains). Thirteen intervention and four control dogs were studied. The glucose uptake in the occluded/reperfused area was significantly enhanced compared with that in control dogs (0.40 +/- 0.14 versus 0.15 +/- 0.10 mumol/ml, respectively). In addition, a significantly greater portion of the glucose extracted immediately entered glycolysis in the intervention group (75%) than in the control dogs (33%). The activity of the nonoxidative glycolytic pathway was markedly increased in the ischemically injured reperfused area, as evidenced by the four times greater lactate release in this area compared with the control value. The dual carbon-labeled isotopes showed that 57% of the exogenous glucose entering glycolysis was being converted to lactate. Exogenous glucose contributed to greater than 90% of the observed lactate production. This finding was confirmed by the histochemical finding of sustained glycogen depletion in the occlusion/reperfusion area. The average area of glycogen depletion (37%) significantly exceeded the average area of necrosis

  14. Physical and chemical mechanism underlying ultrasonically enhanced hydrochloric acid leaching of non-oxidative roasting of bastnaesite.

    Science.gov (United States)

    Zhang, Dongliang; Li, Mei; Gao, Kai; Li, Jianfei; Yan, Yujun; Liu, Xingyu

    2017-11-01

    In this study, we investigated an alternative to the conventional hydrochloric acid leaching of roasted bastnaesite. The studies suggested that the rare earth oxyfluorides in non-oxidatively roasted bastnaesite can be selectively leached only at elevated temperatures Further, the Ce(IV) in oxidatively roasted bastnaesite does not leach readily at low temperatures, and it is difficult to induce it to form a complex with F - ions in order to increase the leaching efficiency. Moreover, it is inevitably reduced to Ce(III) at elevated temperatures. Thus, the ultrasonically-assisted hydrochloric acid leaching of non-oxidatively roasted bastnaesite was studied in detail, including, the effects of several process factors and the, physical and chemical mechanisms underlying the leaching process. The results show that the leaching rate for the ultrasonically assisted process at 55°C (65% rare earth oxides) is almost the same as that for the conventional leaching process at 85°C. Based on the obtained results, it is concluded that ultrasonic cavitation plays a key role in the proposed process, resulting not only in a high shear stress, which damages the solid surface, but also in the formation of hydroxyl radicals (OH) and hydrogen peroxide (H 2 O 2 ). Standard electrode potential analysis and experimental results indicate that Ce(III) isoxidized by the hydroxyl radicals to Ce(IV), which can be leached with F - ions in the form of a complex, and that the Ce(IV) can subsequently be reduced to Ce(III) by the H 2 O 2. This prevents the Cl - ions in the solution from being oxidized to form chlorine. These results imply that the ultrasonically-assisted process can be used for the leaching of non-oxidatively roasted bastnaesite at low temperatures in the absence of a reductant. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Colectomy for refractory constipation

    DEFF Research Database (Denmark)

    Raahave, Dennis; Loud, Franck Bjørn; Christensen, Elsebeth

    2010-01-01

    OBJECTIVE: This study evaluated the type of colectomy, postoperative complications, functional results, and satisfaction in patients with constipation refractory to conservative therapy. Further, colonic transit time (CTT), faecal load (coprostasis), and colon length (redundancies) were compared...... had at hemicolectomy, 11 patients a subtotal colectomy and 3 patients an ileostomy. Two patients had an anastomotic leak and one died. In 11 patients, further surgery was necessary, because of recurrent constipation. Abdominal pain disappeared and defecation patterns improved significantly to 1-4 per...

  16. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Young, W.R.

    1984-01-01

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  17. Refractory status epilepticus

    Directory of Open Access Journals (Sweden)

    Sanjay P Singh

    2014-01-01

    Full Text Available Refractory status epilepticus is a potentially life-threatening medical emergency. It requires early diagnosis and treatment. There is a lack of consensus upon its semantic definition of whether it is status epilepticus that continues despite treatment with benzodiazepine and one antiepileptic medication (AED, i.e., Lorazepam + phenytoin. Others regard refractory status epilepticus as failure of benzodiazepine and 2 antiepileptic medications, i.e., Lorazepam + phenytoin + phenobarb. Up to 30% patients in SE fail to respond to two antiepileptic drugs (AEDs and 15% continue to have seizure activity despite use of three drugs. Mechanisms that have made the treatment even more challenging are GABA-R that is internalized during status epilepticus and upregulation of multidrug transporter proteins. All patients of refractory status epilepticus require continuous EEG monitoring. There are three main agents used in the treatment of RSE. These include pentobarbital or thiopental, midazolam and propofol. RSE was shown to result in mortality in 35% cases, 39.13% of patients were left with severe neurological deficits, while another 13% had mild neurological deficits.

  18. Refractory status epilepticus

    Science.gov (United States)

    Singh, Sanjay P; Agarwal, Shubhi; Faulkner, M

    2014-01-01

    Refractory status epilepticus is a potentially life-threatening medical emergency. It requires early diagnosis and treatment. There is a lack of consensus upon its semantic definition of whether it is status epilepticus that continues despite treatment with benzodiazepine and one antiepileptic medication (AED), i.e., Lorazepam + phenytoin. Others regard refractory status epilepticus as failure of benzodiazepine and 2 antiepileptic medications, i.e., Lorazepam + phenytoin + phenobarb. Up to 30% patients in SE fail to respond to two antiepileptic drugs (AEDs) and 15% continue to have seizure activity despite use of three drugs. Mechanisms that have made the treatment even more challenging are GABA-R that is internalized during status epilepticus and upregulation of multidrug transporter proteins. All patients of refractory status epilepticus require continuous EEG monitoring. There are three main agents used in the treatment of RSE. These include pentobarbital or thiopental, midazolam and propofol. RSE was shown to result in mortality in 35% cases, 39.13% of patients were left with severe neurological deficits, while another 13% had mild neurological deficits. PMID:24791086

  19. A Nonoxidative Electrochemical Sensor Based on a Self-Doped Polyaniline/Carbon Nanotube Composite for Sensitive and Selective Detection of the Neurotransmitter Dopamine: A Review

    Directory of Open Access Journals (Sweden)

    Rishi R. Parajuli

    2008-12-01

    Full Text Available Most of the current techniques for in vivo detection of dopamine exploit the ease of oxidation of this compound. The major problem during the detection is the presence of a high concentration of ascorbic acid that is oxidized at nearly the same potential as dopamine on bare electrodes. Furthermore, the oxidation product of dopamine reacts with ascorbic acid present in samples and regenerates dopamine again, which severely limits the accuracy of the detection. Meanwhile, the product could also form a melanin-like insulating film on the electrode surface, which decreases the sensitivity of the electrode. Various surface modifications on the electrode, new materials for making the electrodes, and new electrochemical techniques have been exploited to solve these problems. Recently we developed a new electrochemical detection method that did not rely on direct oxidation of dopamine on electrodes, which may naturally solve these problems. This approach takes advantage of the high performance of our newly developed poly(anilineboronic acid/carbon nanotube composite and the excellent permselectivity of the ion-exchange polymer Nafion. The high affinity binding of dopamine to the boronic acid groups of the polymer affects the electrochemical properties of the polyaniline backbone, which act as the basis for the transduction mechanism of this non-oxidative dopamine sensor. The unique reduction capability and high conductivity of single-stranded DNA functionalized single-walled carbon nanotubes greatly improved the electrochemical activity of the polymer in a physiologically-relevant buffer, and the large surface area of the carbon nanotubes increased the density of the boronic acid receptors. The high sensitivity and selectivity of the sensor show excellent promise toward molecular diagnosis of Parkinson's disease. In this review, we will focus on the discussion of this novel detection approach, the new interferences in this detection approach, and how to

  20. Refractory chronic cluster headache

    DEFF Research Database (Denmark)

    Mitsikostas, Dimos D; Edvinsson, Lars; Jensen, Rigmor H

    2014-01-01

    Chronic cluster headache (CCH) often resists to prophylactic pharmaceutical treatments resulting in patients' life damage. In this rare but pragmatic situation escalation to invasive management is needed but framing criteria are lacking. We aimed to reach a consensus for refractory CCH definition...... for clinical and research use. The preparation of the final consensus followed three stages. Internal between authors, a larger between all European Headache Federation members and finally an international one among all investigators that have published clinical studies on cluster headache the last five years...

  1. Slagging gasifier refractories. A new pathway to longer refractory life

    Energy Technology Data Exchange (ETDEWEB)

    Schnake, Mark [Harbinson-Walker Refractories Company, Mexico, MO (United States)

    2013-07-01

    Solid fuel slagging gasification to convert coal or petroleum coke feedstocks into syngas has rapidly evolved over the last 25 years. The gasifier is a high temperature, high pressure reaction chamber. Operating temperatures are between 1250 and 1575 C. Pressures will be between 20.4 and 68 atm. Syngas has been typically used for chemical feedstocks, fuel for power plants, or for steam and hydrogen generation in other industrial applications. Ash which comes from the solid fuel during gasification has many impurities. It melts during the gasifier reactor operation forming a liquid that penetrates the refractory lining. Given time, the refractory will wear away from thermal spalling, structural spalling, or overheating of the refractory. In some cases, all three wear mechanisms are seen in the same gasifier lining. Industry users have identified refractory life as one major limiting factor in worldwide use of this technology. Users have stated if the refractory liner can increase on-line availability of the gasifier operation, more industry acceptance of this technology is possible. Harbison-Walker Refractories Company will review destructive factors affecting lining life and discuss new refractory materials that have dramatically increased gasifier lining life and reliability. New refractory materials will be presented and supported by field trial results and post mortem analysis.

  2. Refractory benign esophageal strictures

    Directory of Open Access Journals (Sweden)

    Gopal Goyal

    2016-01-01

    Full Text Available Refractory benign esophageal stricture (RBES is a frequently encountered problem worldwide. These strictures arise from various causes such as corrosive injury, radiation therapy, peptic origin, ablative therapy, and after surgery. Most strictures can be treated successfully with endoscopic dilatation using bougies or balloons, with only a few complications. Those patients who fail after serial dilatation with bougies or balloons will come to the category of refractory strictures. Dilatation combined with intralesional steroid injections can be considered for peptic strictures, whereas incisional therapy has been demonstrated to be effective for short anastomotic strictures. When these therapeutic options do not resolve the stenosis, stent placement should be considered. Self-bougienage can be proposed to a selected group of patients with a proximal stenosis. Most of the patients of RBES respond to above-mentioned treatment and occasional patient may require surgery as the final treatment option. This review aims to provide a comprehensive approach toward endoscopic management of RBESs based on current literature and personal experience.

  3. Approaches to refractory epilepsy

    Directory of Open Access Journals (Sweden)

    Jerome Engel

    2014-01-01

    Full Text Available Epilepsy is one of the most common serious neurological conditions, and 30 to 40% of people with epilepsy have seizures that are not controlled by medication. Patients are considered to have refractory epilepsy if disabling seizures continue despite appropriate trials of two antiseizure drugs, either alone or in combination. At this point, patients should be referred to multidisciplinary epilepsy centers that perform specialized diagnostic testing to first determine whether they are, in fact, pharmacoresistant, and then, if so, offer alternative treatments. Apparent pharmacoresistance can result from a variety of situations, including noncompliance, seizures that are not epileptic, misdiagnosis of the seizure type or epilepsy syndrome, inappropriate use of medication, and lifestyle issues. For patients who are pharmacoresistant, surgical treatment offers the best opportunity for complete freedom from seizures. Surgically remediable epilepsy syndromes have been identified, but patients with more complicated epilepsy can also benefit from surgical treatment and require more specialized evaluation, including intracranial EEG monitoring. For patients who are not surgical candidates, or who are unwilling to consider surgery, a variety of other alternative treatments can be considered, including peripheral or central neurostimulation, ketogenic diet, and complementary and alternative approaches. When such alternative treatments are not appropriate or effective, quality of life can still be greatly improved by the psychological and social support services offered by multidisciplinary epilepsy centers. A major obstacle remains the fact that only a small proportion of patients with refractory epilepsy are referred for expert evaluation and treatment.

  4. Autoradiographic study of corrosion of refractories

    International Nuclear Information System (INIS)

    Lisenenkova, S.B.; Kucheryavyi, M.N.; Bursteva, T.A.

    1988-01-01

    A comparative study was made of the character of the interaction between a container-glass melt consisting of sodium calcium silicate and refractories in various furnace sections using an autoradiographic method. Static tests were conducted on specimens of the following refractories: chrome-aluminum-zircon, Bakor 41, corundum, a high alumina refractory, and a refractory based on tin dioxide. The specimens were activated by calcium 45. Autoradiography and photomicrography indicated that an intrinsic feature of all refractories was that calcium from the melt penetrated the refractories along the weak link; for fused-cast refractories, the glass phase; and for sintered refractories, through the binder and cracks

  5. Performance assessment of refractory samples in the Los Alamos Controlled Air Incinerator

    International Nuclear Information System (INIS)

    Hutchins, D.A.; Borduin, L.C.; Koenig, R.A.; Vavruska, J.S.; Warner, C.L.

    1986-01-01

    A refractory evaluation project was initiated in 1979 to study the performance of six selected refractory materials within the Los Alamos Controlled Air Incinerator (CAI). Determining refractory resistance to thermal shock, chemical attack, and plutonium uptake was of particular interest. The experimental refractories were subjected to a variety of waste materials, including transuranic (TRU) contaminated wastes, highly chlorinated compounds and alkaline metal salts of perchlorate, chlorate, nitrate and oxylate, over the six year period of this study. Results of this study to date indicate that the use of high alumina, and possibly specialty plastic refractories, is advisable for the lining of incinerators used for the thermal destruction of diverse chemical compounds. 12 refs., 4 tabs

  6. The Role of Refractory Dissolved Organic Matter in Ocean Carbon Sequestration

    DEFF Research Database (Denmark)

    Jørgensen, Linda

    The ocean assimilates a large amount of atmospheric CO2 and is potentially a buffer for climate change. A fraction of the assimilated CO2 is incorporated into algal biomass and further converted into refractory dissolved organic matter (DOM). Carbon bound in refractory DOM has the potential...... studies the prokaryotic production and degradation of oceanic refractory DOM and discusses the reasons for the persistent nature of this large DOM fraction. The first two papers investigate the microbial carbon pump, i.e. prokaryotic transfor-mation of organic carbon into refractory DOM. The results show...... DOM compounds in the ocean are rare—possibly too rare to sustain viable uptake and assimilation. Hence, the dilute concentration of individual compounds is a possible explanation for the apparent refractory nature of most DOM in the ocean. Understanding the mechanisms that control the quality...

  7. HosA, a MarR Family Transcriptional Regulator, Represses Nonoxidative Hydroxyarylic Acid Decarboxylase Operon and Is Modulated by 4-Hydroxybenzoic Acid.

    Science.gov (United States)

    Roy, Ajit; Ranjan, Akash

    2016-02-23

    Members of the Multiple antibiotic resistance Regulator (MarR) family of DNA binding proteins regulate transcription of a wide array of genes required for virulence and pathogenicity of bacteria. The present study reports the molecular characterization of HosA (Homologue of SlyA), a MarR protein, with respect to its target gene, DNA recognition motif, and nature of its ligand. Through a comparative genomics approach, we demonstrate that hosA is in synteny with nonoxidative hydroxyarylic acid decarboxylase (HAD) operon and is present exclusively within the mutS-rpoS polymorphic region in nine different genera of Enterobacteriaceae family. Using molecular biology and biochemical approach, we demonstrate that HosA binds to a palindromic sequence downstream to the transcription start site of divergently transcribed nonoxidative HAD operon and represses its expression. Furthermore, in silico analysis showed that the recognition motif for HosA is highly conserved in the upstream region of divergently transcribed operon in different genera of Enterobacteriaceae family. A systematic chemical search for the physiological ligand revealed that 4-hydroxybenzoic acid (4-HBA) interacts with HosA and derepresses HosA mediated repression of the nonoxidative HAD operon. Based on our study, we propose a model for molecular mechanism underlying the regulation of nonoxidative HAD operon by HosA in Enterobacteriaceae family.

  8. Refractory chronic migraine

    DEFF Research Database (Denmark)

    Martelletti, Paolo; Katsarava, Zaza; Lampl, Christian

    2014-01-01

    The debate on the clinical definition of refractory Chronic Migraine (rCM) is still far to be concluded. The importance to create a clinical framing of these rCM patients resides in the complete disability they show, in the high risk of serious adverse events from acute and preventative drugs...... and in the uncontrolled application of therapeutic techniques not yet validated.The European Headache Federation Expert Group on rCM presents hereby the updated definition criteria for this harmful subset of headache disorders. This attempt wants to be the first impulse towards the correct identification...... of these patients, the correct application of innovative therapeutic techniques and lastly aim to be acknowledged as clinical entity in the next definitive version of the International Classification of Headache Disorders 3 (ICHD-3 beta)....

  9. Refractory gastroesophageal reflux disease

    Science.gov (United States)

    Subramanian, Charumathi Raghu; Triadafilopoulos, George

    2015-01-01

    Gastroesophageal reflux disease (GERD) is a condition that develops when the reflux of stomach contents into the esophagus causes troublesome symptoms, esophageal injury, and/or complications. Use of proton pump inhibitors (PPI) remains the standard therapy for GERD and is effective in most patients. Those whose symptoms are refractory to PPIs should be evaluated further and other treatment options should be considered, according to individual patient characteristics. Response to PPIs could be total (no symptoms), partial (residual breakthrough symptoms), or absent (no change in symptoms). Patients experiencing complete response do not usually need further management. Patients with partial response can be treated surgically or by using emerging endoscopic therapies. Patients who exhibit no response to PPI need further evaluation to rule out other causes. PMID:25274499

  10. Sorption techniques for production of high purity refractory metals

    International Nuclear Information System (INIS)

    Shatalov, V.V.; Peganov, V.A.; Logvinenko, I.A.; Molchanova, T.V.

    2004-01-01

    A consideration is given to potentialities of sorption processes tot provide a high quality of refractory metal and their alloys when using hydrometallurgical methods for raw material processing. The efficiency of application of ion exchange technology is shown for complex solutions reprocessing for various types of polymetallic raw materials, among them uranium ores, enriched concentrates of refractory metal ores, intermediate products, waste solutions. Based on investigation results on the behaviour of elements in process solutions and the mechanism of their sorption and elution, the process of pure chemical compounds production are developed which provide thereafter manufacturing compact metals. The flowsheets developed are mastered on a commercial scale [ru

  11. Updates in Refractory Status Epilepticus

    Science.gov (United States)

    Mahulikar, Advait; Suchdev, Kushak; Shah, Aashit

    2018-01-01

    Refractory status epilepticus is defined as persistent seizures despite appropriate use of two intravenous medications, one of which is a benzodiazepine. It can be seen in up to 40% of cases of status epilepticus with an acute symptomatic etiology as the most likely cause. New-onset refractory status epilepticus (NORSE) is a recently coined term for refractory status epilepticus where no apparent cause is found after initial testing. A large proportion of NORSE cases are eventually found to have an autoimmune etiology needing immunomodulatory treatment. Management of refractory status epilepticus involves treatment of an underlying etiology in addition to intravenous anesthetics and antiepileptic drugs. Alternative treatment options including diet therapies, electroconvulsive therapy, and surgical resection in case of a focal lesion should be considered. Short-term and long-term outcomes tend to be poor with significant morbidity and mortality with only one-third of patients reaching baseline neurological status. PMID:29854452

  12. Mite allergoids coupled to nonoxidized mannan from Saccharomyces cerevisae efficiently target canine dendritic cells for novel allergy immunotherapy in veterinary medicine.

    Science.gov (United States)

    Soria, Irene; Alvarez, Javier; Manzano, Ana I; López-Relaño, Juan; Cases, Bárbara; Mas-Fontao, Ana; Cañada, F Javier; Fernández-Caldas, Enrique; Casanovas, Miguel; Jiménez-Barbero, Jesús; Palomares, Oscar; Viñals-Flórez, Luis M; Subiza, José L

    2017-08-01

    We have recently reported that grass pollen allergoids conjugated with nonoxidized mannan of Saccharomyces cerevisae using glutaraldehyde results in a novel hypoallergenic mannan-allergen complex with improved properties for allergen vaccination. Using this approach, human dendritic cells show a better allergen uptake and cytokine profile production (higher IL-10/IL-4 ratio) for therapeutic purposes. Here we aim to address whether a similar approach can be extended to dogs using canine dendritic cells. Six healthy Spanish Greyhound dogs were used as blood donors to obtain canine dendritic cells (DC) derived from peripheral blood monocytes. Allergens from Dermatophagoides farinae mite were polymerized and conjugated with nonoxidized mannan. Nuclear magnetic resonance (NMR), gel electrophoresis (SDS-PAGE), immunoblotting and IgE-ELISA inhibition studies were conducted to evaluate the main characteristics of the allergoid obtained. Mannan-allergen conjugate and controls were assayed in vitro for canine DC uptake and production of IL-4 and IL-10. The results indicate that the conjugation of D. farinae allergens with nonoxidized mannan was feasible using glutaraldehyde. The resulting product was a polymerized structure showing a high molecular weight as detected by NMR and SDS-PAGE analysis. The mannan-allergen conjugate was hypoallergenic with a reduced reactivity with specific dog IgE. An increase in both allergen uptake and IL-10/IL-4 ratio was obtained when canine DCs were incubated with the mannan-allergen conjugate, as compared with the control allergen preparations (unmodified D. farinae allergens and oxidized mannan-allergen conjugate). We conclude that hypoallergenic D. farinae allergens coupled to nonoxidized mannan is a novel allergen preparation suitable for canine allergy immunotherapy targeting dendritic cells. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  13. Reaction of strontium zirconate with refractory borides and carbides

    International Nuclear Information System (INIS)

    Bowker, J.C.; Lane, J.E.

    1990-01-01

    The chemical compatibility of the potential oxide ceramic matrix material, strontium zirconate, and several different potential nonoxide ceramic reinforcement materials was studied by elevated temperature reaction. Results are presented in this paper

  14. Simultaneous determination of ethanol's four types of non-oxidative metabolites in human whole blood by liquid chromatography tandem mass spectrometry.

    Science.gov (United States)

    Zhang, Xinyu; Zheng, Feng; Lin, Zebin; Johansen, Sys Stybe; Yu, Tianfang; Liu, Yuming; Huang, Zhibin; Li, Jiaolun; Yan, Jie; Rao, Yulan

    2017-04-22

    The importance of ethanol non-oxidative metabolites as the specific biomarkers of alcohol consumption in clinical and forensic settings is increasingly acknowledged. Simultaneous determination of these metabolites can provide a wealth of information like drinking habit and history, but it was difficult to achieve because of their wide range of polarity. This work describes development and validation of a simple liquid chromatography tandem mass spectrometry (LC-MS/MS) assay for 4 types of ethanol non-oxidative metabolites (ethyl glucuronide, ethyl sulfate, fatty acid ethyl esters and phosphatidylethanols) in 50 μL of human whole blood. Pretreatment method, column and MS conditions were optimized. For the first time, the four types of ethanol non-oxidative metabolites with enormous discrepancies of property were simultaneously extracted and analyzed in one run within 40 min. The limits of detections (LODs) were among 0.1-10 ng/mL, and good linearity was obtained. Deviations in precision and accuracy were all lower than 15% at three QC levels. This method was then applied to two forensic samples, resulting in information on drinking habits and drinking time which were very useful for the interpretation of the blood alcohol results. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. The uniformity study of non-oxide thin film at device level using electron energy loss spectroscopy

    Science.gov (United States)

    Li, Zhi-Peng; Zheng, Yuankai; Li, Shaoping; Wang, Haifeng

    2018-05-01

    Electron energy loss spectroscopy (EELS) has been widely used as a chemical analysis technique to characterize materials chemical properties, such as element valence states, atoms/ions bonding environment. This study provides a new method to characterize physical properties (i.e., film uniformity, grain orientations) of non-oxide thin films in the magnetic device by using EELS microanalysis on scanning transmission electron microscope. This method is based on analyzing white line ratio of spectra and related extended energy loss fine structures so as to correlate it with thin film uniformity. This new approach can provide an effective and sensitive method to monitor/characterize thin film quality (i.e., uniformity) at atomic level for thin film development, which is especially useful for examining ultra-thin films (i.e., several nanometers) or embedded films in devices for industry applications. More importantly, this technique enables development of quantitative characterization of thin film uniformity and it would be a remarkably useful technique for examining various types of devices for industrial applications.

  16. In vitro antibacterial activity of oxide and non-oxide bioceramics for arthroplastic devices: II. Fourier transform infrared spectroscopy.

    Science.gov (United States)

    Boschetto, Francesco; Toyama, Nami; Horiguchi, Satoshi; Bock, Ryan M; McEntire, Bryan J; Adachi, Tetsuya; Marin, Elia; Zhu, Wenliang; Mazda, Osam; Bal, B Sonny; Pezzotti, Giuseppe

    2018-04-30

    The metabolic response of Gram-positive Staphylococcus epidermidis (S. epidermidis) bacteria to bioceramic substrates was probed by means of Fourier transform infrared spectroscopy (FTIR). Oxide zirconia-toughened alumina (ZTA) and non-oxide silicon nitride (Si3N4) substrates were tested. Bacteria exposed to silica glass substrates were used as a control. S. epidermidis, a major cause of periprosthetic infections, was screened to obtain a precise time-lapse knowledge of its molecular composition and to mechanistically understand its interaction with different substrates. At the molecular level, the structure of proteins, lipids, nucleic acid, and aromatic amino acids evolved with time in response to different substrates. In combination with statistical validation and local pH measurements, a chemical lysis mechanism was spectroscopically observed in situ on the Si3N4 substrates. Utilization of FTIR in this study avoided fluorescence noise which occurred while probing the ZTA samples with Raman spectroscopy in a companion paper. The substrate-driven dynamics of polysaccharide and peptide variations in the bacterial cell wall, peculiar to Si3N4 bioceramics, are elucidated.

  17. Machining refractory alloys: an overview

    International Nuclear Information System (INIS)

    Christopher, J.D.

    1984-01-01

    Nontraditional machining is a generic term for those material removal processes that differ drastically from the historic operations such as turning, milling, drilling, tapping, and grinding. The use of primary energy modes other than mechanical, such as thermal, electrical, and chemical, sets these operations apart and reinforces their nontraditional label. Several of these newer processes have been very successful in machining close tolerance parts from refractory materials. This paper provides a general overview of both traditional and nontraditional aspects of machining refractory materials. 11 figures, 7 tables

  18. Refractories for steel-works

    International Nuclear Information System (INIS)

    Villanova, R.A.; Galant, C.L.; Haas, C.; Rosenbaum, V.

    The routine procedures utilized for quality control of refractory materials used by PIRATINI's steel-works, are presented ' under an objetive and practical maner. The attention of the paper is concentrated upon the following' refractory types with higher consume: silicon-aluminous; aluminous; basic magnesia; basic chrom-magnesia. All steps of utilization are described, including specification, supplies programation, storage; sampling; physical tests, and also aplication procedures. Results from routine analysis during a six month period, by ' means of X-Ray Quantometry, using the fusion pearls procedure, are presented compared with Atomic Absorption [pt

  19. SINTERED REFRACTORY TUNGSTEN ALLOYS. Gesinterte hochschmelzende wolframlegierungen

    Energy Technology Data Exchange (ETDEWEB)

    Kieffer, R.; Sedlatschek, K.; Braun, H.

    1971-12-15

    Dependence of the melting point of the refractory metals on their positions in the periodic system - alloys of tungsten with other refractory metals - sintering of the alloys - processing of the alloys - technological properties.

  20. Compatibility of refractory materials with boiling sodium

    International Nuclear Information System (INIS)

    Meacham, S.A.

    1976-01-01

    The program employed to determine the compatibility of commercially available refractories with boiling sodium is described. The effects of impurities contained within the refractory material, and their relations with the refractory's physical stability are discussed. Also, since consideration of refractories for use as an insulating material within Liquid Metal Fast Breeder Reactor Plants (LMFBR's) is currently under investigation; recommendations, based upon this program, are presented

  1. REFRACTORY THROMBOCYTOPENIA AND NEUTROPENIA: A DIAGNOSTIC CHALLENGE

    OpenAIRE

    Emmanuel Gyan; François Dreyfus; Pierre Fenaux

    2015-01-01

    Background. The 2008 WHO classification identified refractory cytopenia with unilineage dysplasia (RCUD) as a composite entity encompassing refractory anemia, refractory thrombocytopenia (RT), and refractory neutropenia (RN), characterized by 10% or more dysplastic cells in the bone marrow respective lineage. The diagnosis of RT and RN is complicated by several factors.  Diagnosing RT first requires exclusion of familial thrombocytopenia, chronic auto-immune thrombocytopenia, concomitant medi...

  2. Refractory disease in autoimmune diseases

    NARCIS (Netherlands)

    Vasconcelos, Carlos; Kallenberg, Cees; Shoenfeld, Yehuda

    Refractory disease (RD) definition has different meanings but it is dynamic, according to knowledge and the availability of new drugs. It should be differentiated from severe disease and damage definitions and it must take into account duration of adequate therapy and compliance of the patient. It

  3. Development status of metallic, dispersion and non-oxide advanced and alternative fuels for power and research reactors

    International Nuclear Information System (INIS)

    2003-09-01

    eighties until the present days. The aspects of HTGR fuels, as well as partitioning and transmutation (P and T) of minor actinides and relative specific fuels have not been addressed. The International Atomic Energy Agency's (IAEA) Division of Nuclear Fuel Cycle and Waste Technology has been closely involved for many years in the above mentioned activities in the framework of the Advisory Group on Advanced Fuel Technology and Performance (fast reactor fuels) and Technical Working Group on Water Reactor Fuel Performance and Technology (thermal power reactor fuels). Apart from the progress made during the last decade, this report summarizes technological approaches, out-of-pile and in-pile properties of many types of advanced non-oxide fuels. It is expected that the report will provide IAEA Member States and their nuclear engineers with useful information and will preserve knowledge in the area for future developments. The review was prepared by a group of experts in the field from Germany, India and the Russian Federation and supported by information from specialists in Japan, Switzerland and the IAEA engaged in non-oxide fuel developments and related subjects

  4. Magnesium compounds

    Science.gov (United States)

    Kramer, D.A.

    2007-01-01

    Seawater and natural brines accounted for about 52 percent of U.S. magnesium compounds production in 2006. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from sea-water by Premier Chemicals in Florida; from well brines in Michigan by Martin Marietta and Rohm and Haas; and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from brucite by Applied Chemical Magnesias in Texas, from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta and Rohm and Haas from their operations mentioned above. About 59 percent of the magnesium compounds consumed in the United States was used for refractories that are used mainly to line steelmaking furnaces. The remaining 41 percent was consumed in agricultural, chemical, construction, environmental and industrial applications.

  5. Interventional embolization for refractory hyperthyroidism

    International Nuclear Information System (INIS)

    Jiang Guomin; Zhang Yunping; Chen Yaxian; Zhao Jinwei; Yang Weihuai; Chen Jinluo

    2001-01-01

    Objective: To evaluate the clinical effects of the thyroid artery embolization for refractory hyperthyroidism. Methods: Super selective catheterization and interventional embolization of thyroid superior and inferior arteries were performed with PVA microspheres and Gelfoam particles. Changes of function and size of thyroid were investigated after embolization. Results: The procedures were succeeded in all 21 patients. Followed up by 3-12 months, serum level of thyroid hormones dropped significantly (median FT 3 from 17.1 pmol/L to 7.44 pmol/L, median FT 4 from 51.1 pmol/L to 23.3 pmol/L, P< 0.01). The size of thyroid glands decreased remarkably. Symptoms of hyperthyroidism were controlled in 4 patients and were effectively controlled through low dose antithyroid medication in 17 patients. No serious complications occurred. Conclusions: Thyroid artery embolization is a new safe and effective method for refractory hyperthyroidism

  6. Wetting of refractory metals with copper base alloys

    International Nuclear Information System (INIS)

    Anikeev, E.F.; Kostikov, V.I.; Chepelenko, V.N.; Batov, V.M.

    1978-01-01

    The effect is studied of phosphorus upon the wetting of molybdenum, niobium and tantalum by an alloy of the system copper-silver (10%) as a function of contact time and phosphorus concentration. Experiments have been conducted in vacuum of 5x10 -4 mm Hg at 900 deg C. It is established that the introduction of phosphorus into a copper-silver alloy improves the wetting of molybdenum, niobium and tantalum. Formation of intermetallic compounds on the alloy-refractory metal interface can be avoided by adjusting the time of contact of the solder with molybdenum, niobium and tantalum. As a solder with 2.9% phosphorus spreads well over copper, it is suggested to use said solder for brazing copper and the investigated refractory metals in items intended for service at temperatures of up to 600 deg C

  7. Reaction-transport simulations of non-oxidative methane conversion with continuous hydrogen removal: Homogeneous-heterogeneous methane reaction pathways

    International Nuclear Information System (INIS)

    Li, Lin; Borry, Richard W.; Iglesia, Enrique

    2000-01-01

    Detailed kinetic-transport models were used to explore thermodynamic and kinetic barriers in the non-oxidative conversion of CH4 via homogeneous and homogeneous-heterogeneous pathways and the effects of continuous hydrogen removal and of catalytic sites on attainable yields of useful C2-C10 products. The homogeneous kinetic model combines separately developed models for low-conversion pyrolysis and for chain growth to form large aromatics and carbon. The H2 formed in the reaction decreases CH4 pyrolysis rates and equilibrium conversions and it favors the formation of lighter products. The removal of H2 along tubular reactors with permeable walls increases reaction rates and equilibrium CH4 conversions. C2-C10 yields reach values greater than 90 percent at intermediate values of dimensionless transport rates (delta=1-10), defined as the ratio hydrogen transport and methane conversion rates. Homogeneous reactions require impractical residence times, even with H2 removal, because of slow initiation and chain transfer rates. The introduction of heterogeneous chain initiation pathways using surface sites that form methyl radicals eliminates the induction period without influencing the homogeneous product distribution. Methane conversion, however, occurs predominately in the chain transfer regime, within which individual transfer steps and the formation of C2 intermediates become limited by thermodynamic constraints. Catalytic sites alone cannot overcome these constraints. Catalytic membrane reactors with continuous H2 removal remove these thermodynamic obstacles and decrease the required residence time. Reaction rates become limited by homogeneous reactions of C2 products to form C6+ aromatics. Higher delta values lead to subsequent conversion of the desired C2-C10 products to larger polynuclear aromatics. We conclude that catalytic methane pyrolysis at the low temperatures required for restricted chain growth and the elimination of thermodynamics constraints via

  8. A Review on Recent Advances on Magnesia-Doloma Refractories by Nano-Technology.

    Directory of Open Access Journals (Sweden)

    Salman Ghasemi-Kahrizsangi

    2017-07-01

    Full Text Available Due to exhibiting an excellent chemical resistance against basic environments at high temperature, good thermal shock resistance, thermodynamic stability in the presence of carbon, and a suitable abrasion resistance, MgO-CaO refractories are widely used in argon-oxygen decarburization furnaces in the metallurgy industry and cement rotary kilns. Furthermore, MgO-CaO refractories are beneficial to removing inclusions from molten steels; thus, they have been considered to be one of the effective refractory types for processing clean steel products. Also, MgO-CaO materials have become one of the attractive steelmaking refractories because of their low cost and high ore reserves.  However, in spite of these primary advantages, the application of MgO-CaO refractories has not been popular due to its tendency to hydration when exposed to the atmosphere.  In world most of MgO-CaO bricks producers used of organic components such as tar, pitch, and peck for produce MgO-CaO refractories. But during the application of these bricks in steel and cement and industrials, they released CO and CO2 gases to air and pollute the atmosphere. For this reason, recently some researcher investigate the effect of additive nanoparticles on MgO-CaO refractories performance. They reported the used of Nano-additive have acceptable results and additive nanoparticles can replace by aforementioned environment contaminating organic compounds. In this study, we reviewed all effort that done for improving the hydration resistance of MgO-CaO refractories by application of Nano-additives with an emphasis on the beneficial the use of additives nanoparticle for reduction of environmental pollution by various industries which used of MgO-CaO refractory bricks.

  9. Emergency Surgery for Refractory Status Epilepticus.

    Science.gov (United States)

    Botre, Abhijeet; Udani, Vrajesh; Desai, Neelu; Jagadish, Spoorthy; Sankhe, Milind

    2017-08-15

    Management of refractory status epilepticus in children is extremely challenging. Two children with medically refractory status epilepticus, both of whom had lesional pathology on MRI and concordant data on EEG and PET scan. Emergency hemispherotomy performed in both patients. A complete, sustained seizure freedom obtained postoperatively. Emergency surgery is a treatment option in selected cases of drug refractory status epilepticus with lesional pathology and concordant data.

  10. Merits of using andalusite-based refractories compared to bauxite-based refractories

    OpenAIRE

    Nyoka, M.; Brazier, D.; Courtney, T.; Parry, R.A.

    2013-01-01

    Historically bauxite-based refractories have been used in applications where andalusite-based refractories could work. Bauxite-based refractories were chosen over andalusite-based refractories mainly because of the availability of low-cost Chinese bauxite and also because many furnaces were designed by international companies that cannot easily access high-quality products. Currently, the availability of low-cost bauxite is under threat as a result of high export duties and tariffs as well as...

  11. Development of refractory concrete for extreme conditions

    International Nuclear Information System (INIS)

    Pundiene, I; Antonovich, V; Stonys, R; Demidova-Buiziniene, I

    2011-01-01

    Comparative analysis is provided for the properties of medium-cement refractory concrete with microsilica based on mullite filler in relation to different type of deflocculant. The effect of different deflocculants on refractory concrete structure formation, hydration, rheology, strength and heat resistance is discussed. Corrosion resistance test, determined that samples with hybrid deflocculant showed better resistance for slag penetration than samples with only the sodium tripolyphosphate or polycarboxylate ether deflocculant. Moreover, a composition of hybrid deflocculant let to control the rate of the hydration process and to get features of refractory refractory concrete.

  12. Refractory, Abrasive and Other Industrial Mineral Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes refractory, abrasive, and other industrial minerals operations in the United States. The data represent commodities covered by the Minerals...

  13. Refractory organic substances in the environment

    National Research Council Canada - National Science Library

    Frimmel, F. H

    2002-01-01

    ... and its Quality Control in Fractions of Refractory Organic Substances and the Corresponding Original Water Samples 39 Introduction 39 Description of Analytical Methods 41 Sample Treatment 41 Fl...

  14. Genetics Home Reference: iron-refractory iron deficiency anemia

    Science.gov (United States)

    ... refractory iron deficiency anemia Iron-refractory iron deficiency anemia Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Iron-refractory iron deficiency anemia is one of many types of anemia , which ...

  15. Management of refractory status epilepticus in adults

    Science.gov (United States)

    Rossetti, Andrea O.; Lowenstein, Daniel H.

    2011-01-01

    Summary Refractory status epilepticus (RSE) can be defined as status epilepticus that continues despite treatment with benzodiazepines and one antiepileptic drug. RSE should be treated promptly to prevent morbidity and mortality; however, scarce evidence is available to support the choice of specific treatments. Major independent outcome predictors are age (not modifiable) and etiology (that should be actively targeted). Recent recommendations for adults, relying upon limited evidence, suggest that RSE treatment aggressiveness should be tailored to the clinical situation: to minimize ICU-related complications, focal RSE without major consciousness impairment might initially be approached more conservatively; conversely, early induction of pharmacological coma is advisable in generalized-convulsive forms. At this stage, midazolam, propofol or barbiturates represent the most used alternatives. Several other treatments, such as additional anesthetics, other antiepileptic or immunomodulatory compounds, or non-pharmacological approaches (electroconvulsive treatment, hypothermia), have been used in protracted RSE. Treatment lasting weeks or months may sometimes result in a good outcome, as in selected cases after cerebral anoxia and encephalitis. Well-designed prospective studies of this condition are urgently needed. PMID:21939901

  16. Plasticity enhancement mechanisms in refractory metals and intermetallics

    International Nuclear Information System (INIS)

    Gibala, R.; Chang, H.; Czarnik, C.M.; Edwards, K.M.; Misra, A.

    1993-01-01

    Plasticity enhancement associated with surface films and precipitates or dispersoids in bcc refractory metals is operative in ordered intermetallic compounds. Some results are given for NiAl and MoSi 2 -based materials. The monotonic and cyclic plasticity of NiAl at room temperature can be enhanced by surface films. Ductile second phases also enhance the plasticity of NiAl. MoSi 2 exhibits similar effects of surface films and dispersoids, but primarily at elevated temperatures. The plasticity enhancement is associated with enhanced dislocation generation from constrained deformation at the film-substrate or precipitate/dispersoid-matrix interface of the composite systems

  17. Ductile mandrel and parting compound facilitate tube drawing

    Science.gov (United States)

    Burt, W. R., Jr.; Mayfield, R. M.; Polakowski, N. H.

    1966-01-01

    Refractory tubing is warm drawn over a solid ductile mandrel with a powder parting compound packed between mandrel and the tubes inner surface. This method applies also to the coextrusion of a billet and a ductile mandrel.

  18. Refractory metal particles in refractory inclusions in the Allende meteorite

    International Nuclear Information System (INIS)

    Fuchs, L.H.; Blander, M.

    1980-01-01

    An examination of refractory metal particles in five calcium-aluminum-rich inclusions in the Allende meteorite indicates a complex variety of compositions and large departures from equilibrium. These particles appear to have been primordial condensates which were isolated from the nebula and from each other at different times by cocondensing oxides. Selective diffusion and/or oxidation of the more oxidizable metals (Mo, W, Fe and Ni), phase segregations into different alloy phases (fcc, bcc, hcp and perhaps ordered phases) and the formation of metastable condensates appears to have been involved in the modification of these materials to their present state. Only a small fraction of our observations cannot be reconciled with this picture because of a lack of knowledge of some of the phase equilibria which might have bee involved

  19. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Laing

    2005-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  20. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Jun Wei

    2005-03-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  1. Carbothermic reduction of refractory metals

    International Nuclear Information System (INIS)

    Anderson, R.N.; Parlee, N.A.D.

    1976-01-01

    The reduction of stable refractory metal oxides by carbon is generally unacceptable since the product is usually contaminated with carbides. The carbide formation may be avoided by selecting a solvent metal to dissolve the reactive metal as it is produced and reduce its chemical activity below that required for carbide formation. This approach has been successfully applied to the oxides of Si, Zr, Ti, Al, Mg, and U. In the case where a volatile suboxide, a carbonyl reaction, or a volatile metal occur, the use of the solvent metal appears satisfactory to limit the loss of material at low pressures. In several solute--solvent systems, vacuum evaporation is used to strip the solvent metal from the alloy to give the pure metal

  2. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr.; Alireza Rezaie

    2003-12-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  3. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Alireza Rezaie

    2003-12-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  4. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Alireza Rezaie; Xiaoting Liang; Musa Karakus; Jun Wei

    2005-12-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected or developed that reacted with the gasifier environment to form protective surfaces in

  5. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-10-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected/developed that either react with the gasifier environment to form protective surfaces in

  6. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick; Musa Karakus; Alireza Rezaie

    2004-03-30

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  7. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  8. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  9. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-01-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  10. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-04-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  11. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  12. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr.; Alireza Rezaie

    2004-04-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  13. Novel vaccines targeting dendritic cells by coupling allergoids to nonoxidized mannan enhance allergen uptake and induce functional regulatory T cells through programmed death ligand 1.

    Science.gov (United States)

    Sirvent, Sofía; Soria, Irene; Cirauqui, Cristina; Cases, Bárbara; Manzano, Ana I; Diez-Rivero, Carmen M; Reche, Pedro A; López-Relaño, Juan; Martínez-Naves, Eduardo; Cañada, F Javier; Jiménez-Barbero, Jesús; Subiza, Javier; Casanovas, Miguel; Fernández-Caldas, Enrique; Subiza, José Luis; Palomares, Oscar

    2016-08-01

    Allergen immunotherapy (AIT) is the only curative treatment for allergy. AIT faces pitfalls related to efficacy, security, duration, and patient compliance. Novel vaccines overcoming such inconveniences are in demand. We sought to study the immunologic mechanisms of action for novel vaccines targeting dendritic cells (DCs) generated by coupling glutaraldehyde-polymerized grass pollen allergoids to nonoxidized mannan (PM) compared with glutaraldehyde-polymerized allergoids (P) or native grass pollen extracts (N). Skin prick tests and basophil activation tests with N, P, or PM were performed in patients with grass pollen allergy. IgE-blocking experiments, flow cytometry, confocal microscopy, cocultures, suppression assays, real-time quantitative PCR, ELISAs, and ELISpot assays were performed to assess allergen capture by human DCs and T-cell responses. BALB/c mice were immunized with PM, N, or P. Antibody levels, cytokine production by splenocytes, and splenic forkhead box P3 (FOXP3)(+) regulatory T (Treg) cells were quantified. Experiments with oxidized PM were also performed. PM displays in vivo hypoallergenicity, induces potent blocking antibodies, and is captured by human DCs much more efficiently than N or P by mechanisms depending on mannose receptor- and dendritic cell-specific intercellular adhesion molecule 3-grabbing nonintegrin-mediated internalization. PM endorses human DCs to generate functional FOXP3(+) Treg cells through programmed death ligand 1. Immunization of mice with PM induces a shift to nonallergic responses and increases the frequency of splenic FOXP3(+) Treg cells. Mild oxidation impairs these effects in human subjects and mice, demonstrating the essential role of preserving the carbohydrate structure of mannan. Allergoids conjugated to nonoxidized mannan represent suitable vaccines for AIT. Our findings might also be of the utmost relevance to development of therapeutic interventions in other immune tolerance-related diseases. Copyright

  14. ELABORATION PROCESS OF REFRACTORY MATERIALS BY REACTIVE PROJECTION OF OXIDE, PEROXIDE AND METALS

    OpenAIRE

    Pilatti , M.; Cransveld , J.; Raymond , G.; Plumat , E.; Duvigneaud , P.

    1986-01-01

    A device has been set up for spraying with accuracy a compound having a controlled grain size of refractory oxide, peroxide and metals. The refractory material is obtained by melting and recristallisation on a preheated substrate. Composition in the CaO.Al2O3 system and in the CaO-Al2O3-ZrO2 system have been synthesized. They have been analysed by X-ray diffraction and SEM. Dense and well cristallized materials have been deposited. This process can be successfully applied for the repair of a ...

  15. Synthesis, Structure, and Properties of Refractory Hard-Metal Borides

    Science.gov (United States)

    Lech, Andrew Thomas

    As the limits of what can be achieved with conventional hard compounds, such as tungsten carbide, are nearing reach, super-hard materials are an area of increasing industrial interest. The refractory hard metal borides, such as ReB2 and WB4, offer an increasingly attractive alternative to diamond and cubic boron nitride as a next-generation tool material. In this Thesis, a thorough discussion is made of the progress achieved by our laboratory towards understanding the synthesis, structure, and properties of these extremely hard compounds. Particular emphasis is placed on structural manipulation, solid solution formation, and the unique crystallographic manifestations of what might also be called "super-hard metals".

  16. Refractories for Industrial Processing. Opportunities for Improved Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hayden, H. Wayne [Metals Manufacture Process and Controls Technology, Inc., Oak Ridge, TN (United States); Angelini, Peter [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Moore, Robert E. [R.E. Moore Associates, Maricopa, AZ (United States); Headrick, William L. [R.E. Moore Associates, Maricopa, AZ (United States)

    2005-01-01

    Refractories are a class of materials of critical importance to manufacturing industries with high-temperature unit processes. This study describes industrial refractory applications and identifies refractory performance barriers to energy efficiency for processing. The report provides recommendations for R&D pathways leading to improved refractories for energy-efficient manufacturing and processing.

  17. Plasma spraying of refractory metals and refractory hard materials. State of the art

    International Nuclear Information System (INIS)

    Eschnauer, H.; Lugscheider, E.; Jaeger, D.

    1989-01-01

    Suitable spraying processes for manufacturing refractory metals, refractory hard materials as well as spray materials with refractory components are the VPS- and IPS-spraying techniques. The advantages of these special spraying process variations are described. The reactive spraying materials are systematically organized. The characteristical properties used in purpose of improving the substrate surfaces are explained. Finally some examples of the latest results of research concerning plasma spraying of reactive materials are shown. 16 refs., 10 figs. (Author)

  18. Powder metallurgy of refractory metals

    International Nuclear Information System (INIS)

    Eck, R.

    1979-01-01

    This paper reports on the powder metallurgical methods for the production of high-melting materials, such as pure metals and their alloys, compound materials with a tungsten base and hard metals from liquid phase sintered carbides. (author)

  19. Modeling of Oxidized PTH (oxPTH) and Non-oxidized PTH (n-oxPTH) Receptor Binding and Relationship of Oxidized to Non-Oxidized PTH in Children with Chronic Renal Failure, Adult Patients on Hemodialysis and Kidney Transplant Recipients

    DEFF Research Database (Denmark)

    Hocher, Berthold; Oberthür, Dominik; Slowinski, Torsten

    2013-01-01

    Background: The biological properties of oxidized and non-oxidized PTH are substantially different. Oxidized PTH (oxPTH) loses its PTH receptor-stimulating properties, whereas non-oxidized PTH (n-oxPTH) is a full agonist of the receptor. This was described in more than 20 well published studies i......PTH measures describes most likely oxidative stress in patients with renal failure rather than the PTH hormone status. This, however, needs to be demonstrated in further clinical studies. © 2013 S. Karger AG, Basel......., we performed modeling of the interaction of either oxPTH or n-oxPTH with the PTH receptor using biophysical structure approaches. Results: The children had the highest mean as well as maximum n-oxPTH concentrations as compared to adult patients (both patients on dialysis as well as kidney transplant......-oxPTH. This indicated that PTH oxidation may induce refolding of PTH and hence alters PTH-PTH receptor interaction via oxidation induced three-dimensional structure alteration of PTH. Conclusion: A huge proportion of circulating PTH measured by current state-of-the-art assay systems is oxidized and thus...

  20. Zirconium determination in refractories (gravimetric method)

    International Nuclear Information System (INIS)

    Capiotto, N.; Narahashi, Y.; Perish, C.G.; Souza, J.R.

    1991-01-01

    The zirconium determination in refractories is described, consisting in two separation methods for eliminating the interferences. The formatted product is calcined at 1100 0 C and determined gravimetrically as Zr P z 07. (author)

  1. Testing Consent Order on Refractory Ceramic Fibers

    Science.gov (United States)

    This notice announces that EPA has signed signed an enforceable testing consent order under the Toxic Substances Control Act (TSCA), 15 U.S.C. section 2601 at seq., with three of the primary producers of refractory ceramic fibers (RCF).

  2. Zirconium determination in refractories (gravimetric method)

    International Nuclear Information System (INIS)

    Capiotto, N.; Narahashi, Y.; Perish, P.G.; Souza, J.R. de

    1991-01-01

    A gravimetric method for zirconium determination in refractories is described. X-ray fluorescence analysis is also employed in this experiment and considerations about interfering elements are presented. (M.V.M.)

  3. Prognostic Factors for Refractory Status Epilepticus

    Directory of Open Access Journals (Sweden)

    J. Gordon Millichap

    2013-03-01

    Full Text Available Researchers at the Mayo Clinic, Rochester, MN studied the outcome and identified prognostic factors for refractory status epilepticus (RSE in 54 adult patients, median age 52 years [range 18-93].

  4. Forming Refractory Insulation On Copper Wire

    Science.gov (United States)

    Setlock, J.; Roberts, G.

    1995-01-01

    Alternative insulating process forms flexible coat of uncured refractory insulating material on copper wire. Coated wire formed into coil or other complex shape. Wire-coating apparatus forms "green" coat on copper wire. After wire coiled, heating converts "green" coat to refractory electrical insulator. When cured to final brittle form, insulating material withstands temperatures above melting temperature of wire. Process used to make coils for motors, solenoids, and other electrical devices to be operated at high temperatures.

  5. Refractory hypertension: definition, prevalence, and patient characteristics.

    Science.gov (United States)

    Acelajado, Maria Czarina; Pisoni, Roberto; Dudenbostel, Tanja; Dell'Italia, Louis J; Cartmill, Falynn; Zhang, Bin; Cofield, Stacey S; Oparil, Suzanne; Calhoun, David A

    2012-01-01

    Among patients with resistant hypertension (RHTN), there are those whose blood pressure (BP) remains uncontrolled in spite of maximal medical therapy. This retrospective analysis aims to characterize these patients with refractory hypertension. Refractory hypertension was defined as BP that remained uncontrolled after ≥3 visits to a hypertension clinic within a minimum 6-month follow-up period. Of the 304 patients referred for RHTN, 29 (9.5%) remained refractory to treatment. Patients with refractory hypertension and those with controlled RHTN had similar aldosterone levels and plasma renin activity (PRA). Patients with refractory hypertension had higher baseline BP (175±23/97±15 mm Hg vs 158±25/89±15 mm Hg; P=.001/.005) and heart rate, and higher rates of prior stroke and congestive heart failure. During follow-up, the BP of patients with refractory hypertension remained uncontrolled (168.4±14.8/93.8±17.7 mm Hg) in spite of use of an average of 6 antihypertensive medications, while those of patients with controlled RHTN decreased to 129.3±11.2/77.6±10.8 mm Hg. Spironolactone reduced the BP by 12.9±17.8/6.6±13.7 mm Hg in patients with refractory hypertension and by 24.1±16.7/9.2±12.0 mm Hg in patients with controlled RHTN. In patients with RHTN, approximately 10% remain refractory to treatment. Similar aldosterone and PRA levels and a diminished response to spironolactone suggest that aldosterone excess does not explain the treatment failure. © 2011 Wiley Periodicals, Inc.

  6. Refractories for exhaust gas scrubbers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Primary metal smelters are recovering a greater percentage of their stack emissions because of increased global environmental pressures. Copper and nickel producers processing sulfide ore are under particular scrutiny for sulfur dioxide emissions. The use of various acid plant designs and associated scrubbers to capture the gas is commonplace. Failure of acid plant or sulfur dioxide control devices can be very expensive, both in terms of repair costs and lost production. Close attention should be paid to ensure smooth, long term and proper operation of these vessels. With INCO flash furnace shops smelter gases are treated immediately upon leaving the furnace in a particulate scrubber where the gases are cooled and de-dusted in a water spray chamber. The amount of chlorine and fluorine in the waste gas can vary widely, ranging from non-existent to being a major source of concern for refractory wear. Developed specifically for use in hazardous waste incinerators burning fluorine-containing materials, spall-resistant, high-purity alimina bricks were installed in various gas cleaning units in copper smelting plants. Because of the materials's combination of abrasion resistance, thermal cycling resistance, and chemical durability under conditions of variable SO(3) and fluorine attack, the material has proven to be more than adequate for the challenges of gas cleaning equipment. 2 refs.

  7. REFRACTORY THROMBOCYTOPENIA AND NEUTROPENIA: A DIAGNOSTIC CHALLENGE

    Directory of Open Access Journals (Sweden)

    Emmanuel Gyan

    2015-02-01

    Full Text Available Background. The 2008 WHO classification identified refractory cytopenia with unilineage dysplasia (RCUD as a composite entity encompassing refractory anemia, refractory thrombocytopenia (RT, and refractory neutropenia (RN, characterized by 10% or more dysplastic cells in the bone marrow respective lineage. The diagnosis of RT and RN is complicated by several factors.  Diagnosing RT first requires exclusion of familial thrombocytopenia, chronic auto-immune thrombocytopenia, concomitant medications, viral infections, or hypersplenism. Diagnosis of RN should also be made after ruling out differential diagnoses such as ethnic or familial neutropenia, as well as acquired, drug-induced, infection-related or malignancy-related neutropenia. An accurate quantification of dysplasia should be performed in order to distinguish RT or RN from the provisional entity named idiopathic cytopenia of unknown significance (ICUS. Cytogenetic analysis, and possibly in the future somatic mutation analysis (of genes most frequently mutated in MDS, and flow cytometry analysis aberrant antigen expression on myeloid cells may help in this differential diagnosis. Importantly, we and others found that, while isolated neutropenia and thrombocytopenia are not rare in MDS, those patients can generally be classified (according to WHO 2008 classification as refractory cytopenia with multilineage dysplasia or refractory anemia with excess blasts, while RT and RN (according to WHO 2008 are quite rare.These results suggest in particular that identification of RT and RN as distinct entities could be reconsidered in future WHO classification updates.

  8. Refractory migraine in a headache clinic population

    Directory of Open Access Journals (Sweden)

    Fernandez-Torron Roberto

    2011-08-01

    Full Text Available Abstract Background Many migraineurs who seek care in headache clinics are refractory to treatment, despite advances in headache therapies. Epidemiology is poorly characterized, because diagnostic criteria for refractory migraine were not available until recently. We aimed to determine the frequency of refractory migraine in patients attended in the Headache Unit in a tertiary care center, according to recently proposed criteria. Methods The study population consisted of a consecutive sample of 370 patients (60.8% females with a mean age of 43 years (range 14-86 evaluated for the first time in our headache unit over a one-year period (between October 2008 and October 2009. We recorded information on clinical features, previous treatments, Migraine Disability Assessment Score (MIDAS, and final diagnosis. Results Overall migraine and tension-type headache were found in 46.4% and 20.5% of patients, respectively. Refractory migraine was found in 5.1% of patients. In refractory migraineurs, the mean MIDAS score was 96, and 36.8% were medication-overusers. Conclusions Refractory migraine is a relatively common and very disabling condition between the patients attended in a headache unit. The proposed operational criteria may be useful in identifying those patients who require care in headache units, the selection of candidates for combinations of prophylactic drugs or invasive treatments such as neurostimulation, but also to facilitate clinical studies in this patient group.

  9. Time-resolved analysis of particle emissions from residential biomass combustion - Emissions of refractory black carbon, PAHs and organic tracers

    Science.gov (United States)

    Nielsen, Ingeborg E.; Eriksson, Axel C.; Lindgren, Robert; Martinsson, Johan; Nyström, Robin; Nordin, Erik Z.; Sadiktsis, Ioannis; Boman, Christoffer; Nøjgaard, Jacob K.; Pagels, Joakim

    2017-09-01

    Time-resolved particle emissions from a conventional wood stove were investigated with aerosol mass spectrometry to provide links between combustion conditions, emission factors, mixing state of refractory black carbon and implications for organic tracer methods. The addition of a new batch of fuel results in low temperature pyrolysis as the fuel heats up, resulting in strong, short-lived, variable emission peaks of organic aerosol-containing markers of anhydrous sugars, such as levoglucosan (fragment at m/z 60). Flaming combustion results in emissions dominated by refractory black carbon co-emitted with minor fractions of organic aerosol and markers of anhydrous sugars. Full cycle emissions are an external mixture of larger organic aerosol-dominated and smaller thinly coated refractory black carbon particles. A very high burn rate results in increased full cycle mass emission factors of 66, 2.7, 2.8 and 1.3 for particulate polycyclic aromatic hydrocarbons, refractory black carbon, total organic aerosol and m/z 60, respectively, compared to nominal burn rate. Polycyclic aromatic hydrocarbons are primarily associated with refractory black carbon-containing particles. We hypothesize that at very high burn rates, the central parts of the combustion zone become air starved, leading to a locally reduced combustion temperature that reduces the conversion rates from polycyclic aromatic hydrocarbons to refractory black carbon. This facilitates a strong increase of polycyclic aromatic hydrocarbons emissions. At nominal burn rates, full cycle emissions based on m/z 60 correlate well with organic aerosol, refractory black carbon and particulate matter. However, at higher burn rates, m/z 60 does not correlate with increased emissions of polycyclic aromatic hydrocarbons, refractory black carbon and organic aerosol in the flaming phase. The new knowledge can be used to advance source apportionment studies, reduce emissions of genotoxic compounds and model the climate impacts of

  10. [Surgery of refractory ischemic arrhythmia].

    Science.gov (United States)

    Viganò, M; Graffigna, A; Salerno, G

    1992-03-01

    Since June 1980, 138 patients have undergone surgical treatment for refractory ventricular tachycardia due to ischemic heart disease. Electrically guided surgical ablation (EGSA) of the focus was performed in 117 patients, while 14 patients underwent application of automatic implantable cardioverter-defibrillator (AICD), and 8 patients underwent heart transplantation. During the whole period considered, among the EGSA patients an operative mortality of 13 patients was observed (11.4%), with a late mortality of another 14 patients (13.4%). Two early and six late recurrences were described, and 4 cases of sudden or unexplained death, with 2 cases clearly due to an arrhythmic event. Multivariate analysis showed preoperative ejection fraction lower than 25% as a powerful predictor of early mortality (32% vs 0%). Actuarial survival rate of patients with LVEF lower than 25% was 67 +/- 12% vs 95 +/- 2% at one year and 37 +/- 25% vs 94 +/- 8% at 8 years. A high operative mortality was then observed in patients who underwent aneurysmectomy alone or visually guided procedures as compared to electrically guided procedures (75% or 3 deaths out of 4 patients vs 8.5% or 10 out of 113 patients, respectively). Patients who received an AICD with or without associated procedures showed 1 case of in-hospital mortality and no late mortality; in 6 patients at least one shock was delivered; in two patients the AICD was implanted during an EGSA procedure, due to multiple or difficult origins of the arrhythmias. Of patients who underwent heart transplantation one case of later mortality was observed due to malignancy.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. Refractory versus resistant hypertension: Novel distinctive phenotypes

    Science.gov (United States)

    Dudenbostel, Tanja; Siddiqui, Mohammed; Gharpure, Nitin; Calhoun, David A.

    2017-01-01

    Resistant hypertension (RHTN) is relatively common with an estimated prevalence of 10-20% of treated hypertensive patients. It is defined as blood pressure (BP) >140/90 mmHg treated with ≥3 antihypertensive medications, including a diuretic, if tolerated. Refractory hypertension is a novel phenotype of severe antihypertensive treatment failure. The proposed definition for refractory hypertension, i.e. BP >140/90 mmHg with use of ≥5 different antihypertensive medications, including a diuretic and a mineralocorticoid receptor antagonist (MRA) has been applied inconsistently. In comparison to RHTN, refractory hypertension seems to be less prevalent than RHTN. This review focuses on current knowledge about this novel phenotype compared with RHTN including definition, prevalence, mechanisms, characteristics and comorbidities, including cardiovascular risk. In patients with RHTN excess fluid retention is thought to be a common mechanism for the development of RHTN. Recently, evidence has emerged suggesting that refractory hypertension may be more of neurogenic etiology due to increased sympathetic activity as opposed to excess fluid retention. Treatment recommendations for RHTN are generally based on use and intensification of diuretic therapy, especially with the combination of a long-acting thiazide-like diuretic and an MRA. Based on findings from available studies, such an approach does not seem to be a successful strategy to control BP in patients with refractory hypertension and effective sympathetic inhibition in such patients, either with medications and/or device based approaches may be needed. PMID:29034321

  12. Refractory of Furnaces to Reduce Environmental Impact

    Science.gov (United States)

    Hanzawa, Shigeru

    2011-10-01

    The energy load of furnaces used in the manufacturing process of ceramics is quite large. Most of the environmental impact of ceramics manufacturing is due to the CO2 produced from this high energy load. To improve this situation, R&D has focused on furnace systems and techniques of control in order to reduce energy load. Since furnaces are comprised of refractory, consideration of their mechanical and thermal characteristics is important. Herein are described several refractory types which were chosen through comparison of the characteristics which contribute to heat capacity reduction, heat insulating reinforcement and high emissivity, thereby improving thermal radiation heat transfer efficiency to the ceramic articles. One selected refractory material which will reduce the environmental impact of a furnace, chosen considering low heat capacity and high emissivity characteristics, is SiC. In this study, thermal radiation heat transfer efficiency improvement and its effect on ceramic articles in the furnace and oxidation behaviour were investigated at 1700K. A high density SiC refractory, built into the furnace at construction, has relatively high oxidation durability and has the ability to reduce environmental impact-CO2 by 10 percent by decreasing the furnace's energy load. However, new oxidation prevention techniques for SiC will be necessary for long-term use in industrial furnaces, because passive to active oxidation transition behaviour of commercial SiC refractory is coming to close ideal.

  13. Stochastic histories of refractory interstellar dust

    International Nuclear Information System (INIS)

    Liffman, K.; Chayton, D.D.

    1988-01-01

    The authors calculate histories for refractory dust particles in the interstellar medium. The double purposes are to learn something of the properties of interstellar dust as a system and to evaluate with specific assumptions the cosmic chemical memory interpretation of a specific class of isotopic anomalies. They assemble the profile of a particle population from a large number of stochastic, or Monte Carlo, histories of single particles, which are necessarily taken to be independent with this approach. They specify probabilities for each of the events that may befall a given particle and unfold its history by a sequence of random numbers. They assume that refractory particles are created only by thermal condensation within stellar material during its ejection from stars, and that these refractory particles can be destroyed only by being sputtered to a size too small for stability or by being incorporated into the formation of new stars. In order to record chemical detail, the authors take each new refractory particle to consist of a superrefractory core plus a more massive refractory mantle. They demonstrate that these superrefractory cores have effective lifetimes much longer than the turnover time of dust mass against sputtering. As examples of cosmic chemical memory they evaluate the 16 O-richness of interstellar aluminum and mechanisms for the 48 Ca/ 50 Ti correlation. Several related consequences of this approach are discussed

  14. Tungsten and refractory metals 3, proceedings

    International Nuclear Information System (INIS)

    Bose, A.; Dowding, R.J.

    1996-01-01

    The Third International Conference on Tungsten and Refractory Metals was held in Greater Washington DC at the McLean Hilton, McLean Virginia, on November 15--16, 1995. This meeting was the third in a series of conferences held in the Washington DC area. The first meeting was in 1992 and was entitled ''International Conference on Tungsten and Tungsten Alloys.'' In 1994, the scope of the meeting was expanded to include other refractory metals such as molybdenum, iridium, rhenium, tantalum and niobium. The tremendous success of that meeting was the primary motivation for this Conference. The broader scope (the inclusion of other refractory metals and alloys) of the Conference was kept intact for this meeting. In fact, it was felt that the developments in the technology of these materials required a common forum for the interchange of current research information. The papers presented in this meeting examined the rapid advancements in the technology of refractory metals, with special emphasis on the processing, structure, and properties. Among the properties there was emphasis on both quasi-static and dynamic rates. Another topic that received considerable interest was the area of refractory carbides and tungsten-copper composites. One day of concurrent session was necessary to accommodate all of the presentations

  15. Refractory of Furnaces to Reduce Environmental Impact

    International Nuclear Information System (INIS)

    Hanzawa, Shigeru

    2011-01-01

    The energy load of furnaces used in the manufacturing process of ceramics is quite large. Most of the environmental impact of ceramics manufacturing is due to the CO 2 produced from this high energy load. To improve this situation, R and D has focused on furnace systems and techniques of control in order to reduce energy load. Since furnaces are comprised of refractory, consideration of their mechanical and thermal characteristics is important. Herein are described several refractory types which were chosen through comparison of the characteristics which contribute to heat capacity reduction, heat insulating reinforcement and high emissivity, thereby improving thermal radiation heat transfer efficiency to the ceramic articles. One selected refractory material which will reduce the environmental impact of a furnace, chosen considering low heat capacity and high emissivity characteristics, is SiC. In this study, thermal radiation heat transfer efficiency improvement and its effect on ceramic articles in the furnace and oxidation behaviour were investigated at 1700K. A high density SiC refractory, built into the furnace at construction, has relatively high oxidation durability and has the ability to reduce environmental impact-CO 2 by 10 percent by decreasing the furnace's energy load. However, new oxidation prevention techniques for SiC will be necessary for long-term use in industrial furnaces, because passive to active oxidation transition behaviour of commercial SiC refractory is coming to close ideal.

  16. Role of Oxygen in Ionic Liquid Gating on Two-Dimensional Cr2Ge2Te6: A Non-oxide Material.

    Science.gov (United States)

    Chen, Yangyang; Xing, Wenyu; Wang, Xirui; Shen, Bowen; Yuan, Wei; Su, Tang; Ma, Yang; Yao, Yunyan; Zhong, Jiangnan; Yun, Yu; Xie, X C; Jia, Shuang; Han, Wei

    2018-01-10

    Ionic liquid gating can markedly modulate a material's carrier density so as to induce metallization, superconductivity, and quantum phase transitions. One of the main issues is whether the mechanism of ionic liquid gating is an electrostatic field effect or an electrochemical effect, especially for oxide materials. Recent observation of the suppression of the ionic liquid gate-induced metallization in the presence of oxygen for oxide materials suggests the electrochemical effect. However, in more general scenarios, the role of oxygen in the ionic liquid gating effect is still unclear. Here, we perform ionic liquid gating experiments on a non-oxide material: two-dimensional ferromagnetic Cr 2 Ge 2 Te 6 . Our results demonstrate that despite the large increase of the gate leakage current in the presence of oxygen, the oxygen does not affect the ionic liquid gating effect on  the channel resistance of Cr 2 Ge 2 Te 6 devices (ionic liquid gating is more effective on the modulation of the channel resistances compared to the back gating across the 300 nm thick SiO 2 .

  17. Linkages between the life-history evolution of tropical and temperate birds and the resistance of cultured skin fibroblasts to oxidative and non-oxidative chemical injury.

    Science.gov (United States)

    Jimenez, Ana Gabriela; Harper, James M; Queenborough, Simon A; Williams, Joseph B

    2013-04-15

    A fundamental challenge facing physiological ecologists is to understand how variation in life history at the whole-organism level might be linked to cellular function. Thus, because tropical birds have higher annual survival and lower rates of metabolism, we hypothesized that cells from tropical species would have greater cellular resistance to chemical injury than cells from temperate species. We cultured dermal fibroblasts from 26 tropical and 26 temperate species of birds and examined cellular resistance to cadmium, H(2)O(2), paraquat, thapsigargin, tunicamycium, methane methylsulfonate (MMS) and UV light. Using ANCOVA, we found that the values for the dose that killed 50% of cells (LD(50)) from tropical birds were significantly higher for H(2)O(2) and MMS. When we tested for significance using a generalized least squares approach accounting for phylogenetic relationships among species to model LD(50), we found that cells from tropical birds had greater tolerance for Cd, H(2)O(2), paraquat, tunicamycin and MMS than cells from temperate birds. In contrast, tropical birds showed either lower or no difference in tolerance to thapsigargin and UV light in comparison with temperate birds. These findings are consistent with the idea that natural selection has uniquely fashioned cells of long-lived tropical bird species to be more resistant to forms of oxidative and non-oxidative stress than cells from shorter-lived temperate species.

  18. Bifunctional composite catalysts using Co3O4 nanofibers immobilized on nonoxidized graphene nanoflakes for high-capacity and long-cycle Li-O2 batteries.

    Science.gov (United States)

    Ryu, Won-Hee; Yoon, Taek-Han; Song, Sung Ho; Jeon, Seokwoo; Park, Yong-Joon; Kim, Il-Doo

    2013-09-11

    Designing a highly efficient catalyst is essential to improve the electrochemical performance of Li-O2 batteries for long-term cycling. Furthermore, these batteries often show significant capacity fading due to the irreversible reaction characteristics of the Li2O2 product. To overcome these limitations, we propose a bifunctional composite catalyst composed of electrospun one-dimensional (1D) Co3O4 nanofibers (NFs) immobilized on both sides of the 2D nonoxidized graphene nanoflakes (GNFs) for an oxygen electrode in Li-O2 batteries. Highly conductive GNFs with noncovalent functionalization can facilitate a homogeneous dispersion in solution, thereby enabling simple and uniform attachment of 1D Co3O4 NFs on GNFs without restacking. High first discharge capacity of 10 500 mAh/g and superior cyclability for 80 cycles with a limited capacity of 1000 mAh/g were achieved by (i) improved catalytic activity of 1D Co3O4 NFs with large surface area, (ii) facile electron transport via interconnected GNFs functionalized by Co3O4 NFs, and (iii) fast O2 diffusion through the ultrathin GNF layer and porous Co3O4 NF networks.

  19. Intravenous Foscarnet With Topical Cidofovir for Chronic Refractory Genital Herpes in a Patient With AIDS.

    Science.gov (United States)

    Usoro, Agnes; Batts, Alfreda; Sarria, Juan C

    2015-01-01

    Few case reports have documented the use of topical cidofovir for refractory genital herpes simplex virus (HSV) ulcers in human immunodeficiency virus (HIV) infected patients. This drug formulation lacks a standardized concentration or even a procedural outline as to how it should be compounded. We aim to discuss the utilization of topical cidofovir in addition to presenting a procedural means of compounding it for treatment of refractory genital HSV ulcers. Our patient completed 21 days of intravenous foscarnet and 13 days of topical cidofovir with clinical improvement in the penile and scrotal ulcers. Genital herpes is a concern in patients with HIV because it generally manifests as a persistent infection. Physicians should be aware that when patients fail to respond to the conventional treatment regimens for genital HSV in a timely manner, other options are available, such as topical cidofovir as an adjuvant to systemic antivirals.

  20. Intravenous Foscarnet With Topical Cidofovir for Chronic Refractory Genital Herpes in a Patient With AIDS

    Directory of Open Access Journals (Sweden)

    Agnes Usoro BSN

    2015-12-01

    Full Text Available Few case reports have documented the use of topical cidofovir for refractory genital herpes simplex virus (HSV ulcers in human immunodeficiency virus (HIV infected patients. This drug formulation lacks a standardized concentration or even a procedural outline as to how it should be compounded. We aim to discuss the utilization of topical cidofovir in addition to presenting a procedural means of compounding it for treatment of refractory genital HSV ulcers. Our patient completed 21 days of intravenous foscarnet and 13 days of topical cidofovir with clinical improvement in the penile and scrotal ulcers. Genital herpes is a concern in patients with HIV because it generally manifests as a persistent infection. Physicians should be aware that when patients fail to respond to the conventional treatment regimens for genital HSV in a timely manner, other options are available, such as topical cidofovir as an adjuvant to systemic antivirals.

  1. Theoretical and practical aspects about corrosion of refractories used in steel metallurgy: part 3: characterization of commercial refractories

    International Nuclear Information System (INIS)

    Braganca, S.R.

    2012-01-01

    In this study, it was reviewed the main aspects found in the literature about refractories corrosion, evaluating the feasibility of certain tests and relating them with experimental results. The physical properties and microstructure of commercial refractories were analyzed, considering the differences between them and the quality implications and probable life of the refractory. Thus, it was studied the various types of refractories used as lining on steel ladle. Magnesia-carbon and doloma-carbon refractories were analyzed, highlighting the differences between them. The examined refractory showed characteristics favoring high resistance to corrosion process, presenting a series of properties to be selected in accordance with industry practice. (author)

  2. Cannabidiol as potential treatment in refractory pediatric epilepsy.

    Science.gov (United States)

    Paolino, Maria Chiara; Ferretti, Alessandro; Papetti, Laura; Villa, Maria Pia; Parisi, Pasquale

    2016-01-01

    In recent years there has been great scientific and public interest focused on the therapeutic potential of compounds derived from cannabis for the treatment of refractory epilepsy in children. From in vitro and in vivo studies on animal models, cannabidiol (CBD) appears to be a promising anticonvulsant drug with a favorable side-effect profile. In humans, CBD efficacy and safety is not supported by well-designed trials and its use has been described by anecdotal reports. It will be necessary to investigate CBD safety, pharmacokinetics and interaction with other anti-epileptic drugs (AEDs) alongside performing double-blinded placebo-controlled trials in order to obtain conclusive data on its efficacy and safety in children.

  3. Friction measurements of steel on refractory bricks

    International Nuclear Information System (INIS)

    Eiselstein, L.E.

    1981-08-01

    During startup or shutdown of a pool-type LMFBR, substantial shear stresses may arise between the base of the steel reactor vessel and the refractory brick support base. The magnitude of these stresses, which result from differences in thermal expansion, can be estimated if the friction coefficient is known. This report describes experiments to determine friction coefficients between 2 1/4 Cr-1Mo steel and several refractory materials and to examine effects to contact pressure, temperature, sliding velocity, lubricants, and surface condition

  4. Chemical analysis of refractories by plasma spectrometry

    International Nuclear Information System (INIS)

    Coutinho, C.A.

    1990-01-01

    X-ray spectrometry has been, since the last two or three decades, the traditional procedure for the chemical analysis of refractories, due to its high degree of accuracy and speed to produce analytical results. An interesting alternative to X-ray fluorescence is provided by the Inductively Coupled Plasma Spectrometry technique, for those laboratories where wet chemistry facilities are already available or process control is not required at high speed, or investiment costs have to be low. This paper presents results obtained by plasma spectroscopy for the analysis of silico - aluminous refractories, showing calibration curves, precion and detection limits. Considerations and comparisons with X-ray fluorescence are also made. (author) [pt

  5. Improvements in or relating to refractory materials

    International Nuclear Information System (INIS)

    Peckett, J.W.A.

    1980-01-01

    A process is described for the production of a refractory material which includes heating an intermediate material containing carbon to cause a thermally induced reaction involving carbon in the intermediate material, wherein the intermediate material has been produced by heating a shaped gel precipitated gel, and the carbon in the intermediate material for participating in the thermally induced reaction has been produced from a gelling agent, or a derivative thereof, incorporated in the gel during gel precipitation. As examples, the refractory material may comprise uranium/plutonium oxide, or uranium/plutonium carbide, or thorium/uranium carbide, or tungsten carbide, or tungsten carbide/cobalt metal. (author)

  6. Statistical experimental design for refractory coatings

    International Nuclear Information System (INIS)

    McKinnon, J.A.; Standard, O.C.

    2000-01-01

    The production of refractory coatings on metal casting moulds is critically dependent on the development of suitable rheological characteristics, such as viscosity and thixotropy, in the initial coating slurry. In this paper, the basic concepts of mixture design and analysis are applied to the formulation of a refractory coating, with illustration by a worked example. Experimental data of coating viscosity versus composition are fitted to a statistical model to obtain a reliable method of predicting the optimal formulation of the coating. Copyright (2000) The Australian Ceramic Society

  7. Refractory disease in antineutrophil cytoplasmic antibodies associated vasculitis

    NARCIS (Netherlands)

    Rutgers, Abraham; Kallenberg, Cornelis

    Purpose of review Induction treatment of antineutrophil cytoplasmic antibodies (ANCA) associated vasculitis (AAV) is not always successful and nonresponding patients are considered refractory. Recent findings Refractory disease should be subdefined to the treatment that was received.

  8. Iatrogenic colorectal Kaposi sarcoma complicating a refractory ...

    African Journals Online (AJOL)

    Kaposi sarcoma is a mesenchymal tumor associated to a human herpes virus-8. It often occurs in human immunodeficiency virus-positive subjects. Colorectal localization is rare. We report the case of a colorectal Kaposi sarcoma complicating a refractory ulcerative colitis treated with surgery after the failure of ...

  9. Decision Making during the Psychological Refractory Period

    NARCIS (Netherlands)

    Zylberberg, Ariel; Ouellette, Brian; Sigman, Mariano; Roelfsema, Pieter R.

    2012-01-01

    In spite of its massively parallel architecture [1], the human brain is fundamentally limited if required to perform two tasks at the same time [2, 3]. This limitation can be studied with the psychological refractory period (PRP) paradigm, where two stimuli that require speeded responses occur in

  10. Service life prediction for refractory materials

    Czech Academy of Sciences Publication Activity Database

    Boccaccini, D. N.; Cannio, M.; Volkov-Husović, T. D.; Kamseu, E.; Romagnoli, M.; Veronesi, P.; Leonelli, C.; Dlouhý, Ivo; Boccaccini, A. R.

    2008-01-01

    Roč. 43, č. 12 (2008), s. 4079-4090 ISSN 0022-2461 R&D Projects: GA ČR(CZ) GA106/05/0495 Institutional research plan: CEZ:AV0Z20410507 Keywords : refractory materials * ultrasonic velocity * fracture toughness Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 1.181, year: 2008

  11. Bone hydatid disease refractory to nitazoxanide treatment

    NARCIS (Netherlands)

    Schipper, Hans G.; Simsek, Suat; van Agtmael, Michiel A.; van Lienden, Krijn P.

    2009-01-01

    We report a patient with bone hydatid disease that was refractory to both long-term daily treatment with albendazole, combined with cimetidine or administered as monotherapy ( approximately 15 years) and a relatively short course of nitazoxanide combined with albendazole (3 months). Despite

  12. Clinical Features of Refractory Ascites in Outpatients

    Directory of Open Access Journals (Sweden)

    Wanda Regina Caly

    Full Text Available OBJECTIVES: To present the clinical features and outcomes of outpatients who suffer from refractory ascites. METHODS: This prospective observational study consecutively enrolled patients with cirrhotic ascites who submitted to a clinical evaluation, a sodium restriction diet, biochemical blood tests, 24 hour urine tests and an ascitic fluid analysis. All patients received a multidisciplinary evaluation and diuretic treatment. Patients who did not respond to the diuretic treatment were controlled by therapeutic serial paracentesis, and a transjugular intrahepatic portosystemic shunt was indicated for patients who required therapeutic serial paracentesis up to twice a month. RESULTS: The most common etiology of cirrhosis in both groups was alcoholism [49 refractory (R and 11 non-refractory ascites (NR]. The majority of patients in the refractory group had Child-Pugh class B cirrhosis (p=0.034. The nutritional assessment showed protein-energy malnutrition in 81.6% of the patients in the R group and 35.5% of the patients in the NR group, while hepatic encephalopathy, hernia, spontaneous bacterial peritonitis, upper digestive hemorrhage and type 2 hepatorenal syndrome were present in 51%, 44.9%, 38.8%, 38.8% and 26.5% of the patients in the R group and 9.1%, 18.2%, 0%, 0% and 0% of the patients in the NR group, respectively (p=0.016, p=0.173, p=0.012, p=0.012, and p=0.100, respectively. Mortality occurred in 28.6% of the patients in the R group and in 9.1% of the patients in the NR group (p=0.262. CONCLUSION: Patients with refractory ascites were malnourished, suffered from hernias, had a high prevalence of complications and had a high postoperative death frequency, which was mostly due to infectious processes.

  13. Potential refractory alloy requirements for space nuclear power applications

    International Nuclear Information System (INIS)

    Cooper, R.H. Jr.

    1984-01-01

    In reviewing design requirements for refractory alloys for space nuclear applications, several key points are identified. First, the successful utilization of refractory alloys is considered an enabling requirement for the successful deployment of high efficiency, lightweight, and small space nuclear systems. Second, the recapture of refractory alloy nuclear technology developed in the 1960s and early 1970s appears to be a pacing activity in the successful utilization of refractory alloys. Third, the successful application of refractory alloys for space nuclear applications will present a significant challenge to both the materials and the systems design communities

  14. Modeling of Oxidized PTH (oxPTH and Non-oxidized PTH (n-oxPTH Receptor Binding and Relationship of Oxidized to Non-Oxidized PTH in Children with Chronic Renal Failure, Adult Patients on Hemodialysis and Kidney Transplant Recipients

    Directory of Open Access Journals (Sweden)

    Berthold Hocher

    2013-07-01

    Full Text Available Background: The biological properties of oxidized and non-oxidized PTH are substantially different. Oxidized PTH (oxPTH loses its PTH receptor-stimulating properties, whereas non-oxidized PTH (n-oxPTH is a full agonist of the receptor. This was described in more than 20 well published studies in the 1970s and 80s. However, PTH oxidation has been ignored during the development of PTH assays for clinical use so far. Even the nowadays used third generation assay systems do not consider oxidation of PTH We recently developed an assay to differentiate between oxPTH and n-oxPTH. In the current study we established normal values for this assay system. Furthermore, we compare the ratio of oxPTH to n-oxPTH in different population with chronic renal failure: 620 children with renal failure stage 2-4 of the 4C study, 342 adult patients on dialysis, and 602 kidney transplant recipients. In addition, we performed modeling of the interaction of either oxPTH or n-oxPTH with the PTH receptor using biophysical structure approaches. Results: The children had the highest mean as well as maximum n-oxPTH concentrations as compared to adult patients (both patients on dialysis as well as kidney transplant recipients. The relationship between oxPTH and n-oxPTH of individual patients varied substantially in all three populations with renal impairment. The analysis of n-oxPTH in 89 healthy control subjects revealed that n-oxPTH concentrations in patient with renal failure were higher as compared to healthy adult controls (2.25-fold in children with renal failure, 1.53-fold in adult patients on dialysis, and 1.56-fold in kidney transplant recipients, respectively. Computer assisted biophysical structure modeling demonstrated, however, minor sterical- and/or electrostatic changes in oxPTH and n-oxPTH. This indicated that PTH oxidation may induce refolding of PTH and hence alters PTH-PTH receptor interaction via oxidation induced three-dimensional structure alteration of

  15. Pharmacotherapy for Refractory and Super-Refractory Status Epilepticus in Adults.

    Science.gov (United States)

    Holtkamp, Martin

    2018-03-01

    Patients with prolonged seizures that do not respond to intravenous benzodiazepines and a second-line anticonvulsant suffer from refractory status epilepticus and those with seizures that do not respond to continuous intravenous anesthetic anticonvulsants suffer from super-refractory status epilepticus. Both conditions are associated with significant morbidity and mortality. A strict pharmacological treatment regimen is urgently required, but the level of evidence for the available drugs is very low. Refractory complex focal status epilepticus generally does not require anesthetics, but all intravenous non-anesthetizing anticonvulsants may be used. Most descriptive data are available for levetiracetam, phenytoin and valproate. Refractory generalized convulsive status epilepticus is a life-threatening emergency, and long-term clinical consequences are eminent. Administration of intravenous anesthetics is mandatory, and drugs acting at the inhibitory gamma-aminobutyric acid (GABA) A receptor such as midazolam, propofol and thiopental/pentobarbital are recommended without preference for one of those. One in five patients with anesthetic treatment does not respond and has super-refractory status epilepticus. With sustained seizure activity, excitatory N-methyl-d-aspartate (NMDA) receptors are increasingly expressed post-synaptically. Ketamine is an antagonist at this receptor and may prove efficient in some patients at later stages. Neurosteroids such as allopregnanolone increase sensitivity at GABA A receptors; a Phase 1/2 trial demonstrated safety and tolerability, but randomized controlled data failed to demonstrate efficacy. Adjunct ketogenic diet may contribute to termination of difficult-to-treat status epilepticus. Randomized controlled trials are needed to increase evidence for treatment of refractory and super-refractory status epilepticus, but there are multiple obstacles for realization. Hitherto, prospective multicenter registries for pharmacological

  16. An unusual case of refractory wheeze

    Science.gov (United States)

    Ramesh, Venkat; Acharya, Vishak; Pai, Narasimha; Krishnan, Ananda

    2015-01-01

    A 37-year-old man presented with a history of episodic wheeze and breathlessness of 3 years’ duration refractory to treatment. Physical examination revealed diffuse expiratory polyphonic rhonchi while the remainder of the examination including the cardiac examination was reported as normal. Pulmonary function testing revealed mild obstruction with bronchodilator reversibility. The patient was discharged on a 6-month course of antitubercular treatment (ATT) as bronchial brush cytology (obtained via bronchoscopy) was positive for acid-fast bacilli. The patient presented after completing 6 months of ATT with persistent symptoms, a loud S1 and a mid-diastolic murmur at the apex. High-resolution CT of the chest showed bilateral dependent ground glass opacities. An echocardiogram revealed a left atrial myxoma, and normal RV size and pressures. The patient underwent successful surgical removal of the same, and made a complete recovery. Refractory wheeze is a very unusual presentation of a left atrial myxoma. PMID:25733086

  17. An unusual case of refractory wheeze

    OpenAIRE

    Ramesh, Venkat; Acharya, Vishak; Pai, Narasimha; Krishnan, Ananda

    2015-01-01

    A 37-year-old man presented with a history of episodic wheeze and breathlessness of 3?years? duration refractory to treatment. Physical examination revealed diffuse expiratory polyphonic rhonchi while the remainder of the examination including the cardiac examination was reported as normal. Pulmonary function testing revealed mild obstruction with bronchodilator reversibility. The patient was discharged on a 6-month course of antitubercular treatment (ATT) as bronchial brush cytology (obtaine...

  18. Molecular Determinants of Hormone Refractory Prostate Cancer

    Science.gov (United States)

    2017-07-01

    receptor is no longer essential for survival, collectively termed androgen pathway independent prostate cancer (APIPC) (Nelson, 2012). A subset of these...Reciprocal feedback regulation of PI3K and androgen receptor signaling in PTEN-deficient prostate cancer . Cancer Cell. 2011 May 17;19(5):575-86. Chen J, Li...2005a). The androgen receptor and signal-transduction pathways in hormone-refractory prostate cancer . Part 1: Modifications to the androgen receptor

  19. Barrier Coatings for Refractory Metals and Superalloys

    International Nuclear Information System (INIS)

    SM Sabol; BT Randall; JD Edington; CJ Larkin; BJ Close

    2006-01-01

    In the closed working fluid loop of the proposed Prometheus space nuclear power plant (SNPP), there is the potential for reaction of core and plant structural materials with gas phase impurities and gas phase transport of interstitial elements between superalloy and refractory metal alloy components during service. Primary concerns are surface oxidation, interstitial embrittlement of refractory metals and decarburization of superalloys. In parallel with kinetic investigations, this letter evaluates the ability of potential coatings to prevent or impede communication between reactor and plant components. Key coating requirements are identified and current technology coating materials are reviewed relative to these requirements. Candidate coatings are identified for future evaluation based on current knowledge of design parameters and anticipated environment. Coatings were identified for superalloys and refractory metals to provide diffusion barriers to interstitial transport and act as reactive barriers to potential oxidation. Due to their high stability at low oxygen potential, alumina formers are most promising for oxidation protection given the anticipated coolant gas chemistry. A sublayer of iridium is recommended to provide inherent diffusion resistance to interstitials. Based on specific base metal selection, a thin film substrate--coating interdiffusion barrier layer may be necessary to meet mission life

  20. Perspectives on environmental protection of refractory metals

    International Nuclear Information System (INIS)

    Perking, R.A.

    1992-01-01

    Alloys of refractory metals which combine high strength to weight ratios with useful low-temperature toughness and ductility have been designed to meet the requirements for the next generation of high-temperature aerospace structural materials with one exception: long term resistance to oxidation. It is considered unlikely that refractory metal alloys can be modified to possess useful resistance to oxidation as bulk materials or that coating can be designed to provide high reliability fail-safe protection for the structural alloys developed to date. Recent developments indicate that bulk alloys of W and Mo can be designed to possess short term resistance to oxidation, providing a base material which can be coated to extend useful life with fail-safe protection in the event of random coating failures. Current research on silicide coatings indicates that significant improvements in coating reliability and performance also are feasible. The technical basis for these conclusions is presented in this paper and the direction of future work that could lead to environmentally stable refractory metal alloy/coating systems is discussed

  1. Barrier Coatings for Refractory Metals and Superalloys

    Energy Technology Data Exchange (ETDEWEB)

    SM Sabol; BT Randall; JD Edington; CJ Larkin; BJ Close

    2006-02-23

    In the closed working fluid loop of the proposed Prometheus space nuclear power plant (SNPP), there is the potential for reaction of core and plant structural materials with gas phase impurities and gas phase transport of interstitial elements between superalloy and refractory metal alloy components during service. Primary concerns are surface oxidation, interstitial embrittlement of refractory metals and decarburization of superalloys. In parallel with kinetic investigations, this letter evaluates the ability of potential coatings to prevent or impede communication between reactor and plant components. Key coating requirements are identified and current technology coating materials are reviewed relative to these requirements. Candidate coatings are identified for future evaluation based on current knowledge of design parameters and anticipated environment. Coatings were identified for superalloys and refractory metals to provide diffusion barriers to interstitial transport and act as reactive barriers to potential oxidation. Due to their high stability at low oxygen potential, alumina formers are most promising for oxidation protection given the anticipated coolant gas chemistry. A sublayer of iridium is recommended to provide inherent diffusion resistance to interstitials. Based on specific base metal selection, a thin film substrate--coating interdiffusion barrier layer may be necessary to meet mission life.

  2. IMPROVED CORROSION RESISTANCE OF ALUMINA REFRACTORIES

    Energy Technology Data Exchange (ETDEWEB)

    John P. Hurley; Patty L. Kleven

    2001-09-30

    The initial objective of this project was to do a literature search to define the problems of refractory selection in the metals and glass industries. The problems fall into three categories: Economic--What do the major problems cost the industries financially? Operational--How do the major problems affect production efficiency and impact the environment? and Scientific--What are the chemical and physical mechanisms that cause the problems to occur? This report presents a summary of these problems. It was used to determine the areas in which the EERC can provide the most assistance through bench-scale and laboratory testing. The final objective of this project was to design and build a bench-scale high-temperature controlled atmosphere dynamic corrosion application furnace (CADCAF). The furnace will be used to evaluate refractory test samples in the presence of flowing corrodents for extended periods, to temperatures of 1600 C under controlled atmospheres. Corrodents will include molten slag, steel, and glass. This test should prove useful for the glass and steel industries when faced with the decision of choosing the best refractory for flowing corrodent conditions.

  3. Process technology - rare and refractory metals

    International Nuclear Information System (INIS)

    Gupta, C.K.; Bose, D.K.

    1989-01-01

    India has fairly rich resreves of rare and refractory metals. Abundant sources of ilmenite, rutile, zircon and rare earths are found in the placer deposits of the southern and eastern coasts of the country. Columbite-tantalite occur in mica and the mining belts of Bihar and cassiterite deposits are found in Bastar (Madhya Pradesh). Vanadium as a minor associate occurs in bauxites and in the vast deposits of titaniferrous magnetites. Over the years, research and development and pilot plant works in many research organisations in India have built up a sound technological base in the country for process metallurgy of many refractory and rare earth metals starting from their indigenous sources. The present paper provides a comprehensive view of the developments that have taken place till now on the processing of various refractory and rare earth metals with particular reference to the extensive work carried out at the Department of Atomic Energy. The coverage includes mineral benification separation of individual elements, preparation of pure intermediates, techniques of reduction to metal and final purification. The paper also reviews some of the recent developments that have been taken place in these fields and the potential application of these metals in the foreseeable future. (author). 22 refs., 18 fi g., 7 tabs

  4. Nanostructured refractory thin films for solar applications

    Science.gov (United States)

    Ollier, E.; Dunoyer, N.; Dellea, O.; Szambolics, H.

    2014-08-01

    Selective solar absorbers are key elements of all solar thermal systems. Solar thermal panels and Concentrated Solar Power (CSP) systems aim respectively at producing heat and electricity. In both cases, a surface receives the solar radiation and is designed to have the highest optical absorption (lowest optical reflectivity) of the solar radiation in the visible wavelength range where the solar intensity is the highest. It also has a low emissivity in the infrared (IR) range in order to avoid radiative thermal losses. Current solutions in the state of the art usually consist in deposited interferential thin films or in cermets [1]. Structured surfaces have been proposed and have been simulated because they are supposed to be more efficient when the solar radiation is not normal to the receiving surface and because they could potentially be fabricated with refractory materials able to sustain high operating temperatures. This work presents a new method to fabricate micro/nanostructured surfaces on molybdenum (refractory metal with a melting temperature of 2623°C). This method now allows obtaining a refractory selective surface with an excellent optical selectivity and a very high absorption in the visible range. This high absorption performance was obtained by achieving a double structuration at micro and nano scales thanks to an innovative process flow.

  5. Refractory castables Al2O3-MgO advanced boron-containing

    International Nuclear Information System (INIS)

    Morbioli, G.G.; Braulio, M.A.L.; Pandolfelli, V.C.

    2011-01-01

    Alumina-magnesia refractory castables present high corrosion resistance mainly due to the in situ spinel (MgAl 2 O 4 ) formation. For the steel industry, the earlier its generation the best would be the castable's working performance. Taking this aspect into account, alternatives to replace silica fume, which is the most traditional liquid former inducer in this system, were evaluated in this study, by adding boron-containing compounds. Faster spinel and calcium hexaaluminate (CA 6 ) formation was attained through a transient liquid, ensuring remarkable castable's creep resistance and hot modulus of rupture. In this context, a novel route to design in situ spinel forming castable is presented, with great potential to increase the performance of this class of refractory. (author)

  6. Application of metal oxide refractories for melting and casting reactive metals

    International Nuclear Information System (INIS)

    Jessen, N.C. Jr.; Holcombe, C.E. Jr.; Townsend, A.B.

    1979-01-01

    Extensive investigations have been conducted to develop metal oxide refractories for containment of molten uranium and uranium alloys. Since uranium and uranium alloys are readily susceptable to the formation of complex oxides, carbides, nitrides, intermetallic compounds, and suboxide reactions, severe problems exist for the production of quality castings. These contamination reactions are dependent on temperature, pressure, and molten metal interfacial reactions. The need for high purity metals to meet specification repeatedly has resulted in the development of improved metal oxide refractories and sophisticated furnace controls. Applications of Y 2 O 3 for use as a crucible and mold coating, precision molds and cores, and high temperature castable ceramics are discussed. Experimental results on melt impurity levels, thermal controls during melting, surface interactions and casting quality are presented

  7. Removal of Refractory Organics from Biologically Treated Landfill Leachate by Microwave Discharge Electrodeless Lamp Assisted Fenton Process

    Directory of Open Access Journals (Sweden)

    Jiuyi Li

    2015-01-01

    Full Text Available Biologically treated leachate usually contains considerable amount of refractory organics and trace concentrations of xenobiotic pollutants. Removal of refractory organics from biologically treated landfill leachate by a novel microwave discharge electrodeless lamp (MDEL assisted Fenton process was investigated in the present study in comparison to conventional Fenton and ultraviolet Fenton processes. Conventional Fenton and ultraviolet Fenton processes could substantially remove up to 70% of the refractory organics in a membrane bioreactor treated leachate. MDEL assisted Fenton process achieved excellent removal performance of the refractory components, and the effluent chemical oxygen demand concentration was lower than 100 mg L−1. Most organic matters were transformed into smaller compounds with molecular weights less than 1000 Da. Ten different polycyclic aromatic hydrocarbons were detected in the biologically treated leachate, most of which were effectively removed by MDEL-Fenton treatment. MDEL-Fenton process provides powerful capability in degradation of refractory and xenobiotic organic pollutants in landfill leachate and could be adopted as a single-stage polishing process for biologically treated landfill leachate to meet the stringent discharge limit.

  8. Evaluation of the reusing of MGO-C refractory brick in refractory mixes

    International Nuclear Information System (INIS)

    Silva, R.D.S. da; Braganca, S.R.

    2012-01-01

    The residue from the use of MgO-C refractories in electric arc furnace presents, mostly, magnesium oxide in its composition and some slag contamination and impurities from the process of electrofusion scrap iron/steel. In this study, it was studied the characteristics of this residue and reused through its introduction into a commercial refractory mix, employed as material of coating and repair. This refractory mix was tested by thermogravimetric analysis, compressive strength, evaluation of plasticity and porosity as well as aspects of its installation, such as adhesion in situ. Results showed that there potential for reuse with the introduction of the waste in commercial mix was 30%, with little loss of compressive strength and plasticity. (author)

  9. Diagnosis and management of refractory celiac disease: a systematic review.

    Science.gov (United States)

    Labidi, Asma; Serghini, Meriem; Karoui, Sami; Boubaker, Jalel; Filali, Azza

    2013-01-01

    Refractory celiac disease is defined by persisting malabsorptive symptoms in spite of a strict gluten free diet for at least 6 to 12 months. Alternatives to gluten free diet seem to be still controversial. To describe the clinical and epidemiologic aspects of refractory celiac disease, and to identify therapeutic options in this condition. Systematic review and critical analysis of observational studies, clinical trials and case reports that focused on diagnosis and management of refractory celiac disease. Refractory celiac disease can be classified as type 1 or type 2 according to the phenotype of intraepithelial lymphocytes. Great complications such as enteropathy-associated T-cell lymphoma may occur in a subgroup of these patients mainly in refractory celiac disease type 2. Curative therapies are still lacking. Refractory celiac disease remains a diagnosis of exclusion. Its prognosis remains still dismal by the absence yet of curative therapies. However, some new treatments seem to hold promise during few cohort-studies.

  10. Temperature and Thermal Stress Analysis of Refractory Products

    Directory of Open Access Journals (Sweden)

    Shaoyang Shi

    2013-05-01

    Full Text Available Firstly current status of temperature and thermal stress research of refractory product at home and aboard are analyzed. Finite element model of two classical refractory products is building by using APDL language. Distribution law of temperature and thermal stress of two typical refractory products-ladles and tundish are analyzed and their structures are optimized. Stress of optimal structure is dropped obviously, and operation life is increased effectively.

  11. Handbook of industrial refractories technology principles, types, properties and applications

    CERN Document Server

    Caniglia, Stephen

    1989-01-01

    Encompasses the entire range of industrial refractory materials and forms: properties and their measurement, applications, manufacturing, installation and maintenance techniques, quality assurance, and statistical process control.

  12. Refractory Coated/Lined Low Density Structures, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This project addresses the development of refractory coated or lined low density structures applicable for advanced future propulsion system technologies. The...

  13. An investigation into mineral processing of north Semnan refractory earth

    International Nuclear Information System (INIS)

    Aslani, S.; Samin-Bani-Hashemi, H.R.; Taghi-Zadeh, O.

    2002-01-01

    This paper is dealing with refractory earth of North Semnan. Having an area of 2000 square kilometers, Semnan province is mainly formed by sedimentary rocks with a verity of refractory earth, red earth and kaolin containing heavy minerals. The refractory earth of this area contains a considerable rate of aluminum oxide in shape of dia spore minerals, behemoth and gybsite along with heavy minerals of iron and titanium. To improve the quality of refractory earth, in order to be used in related industries, these minerals have to be separated. To assess the quality of refractory earth of North Semnan as the raw materials of refractory industries, their genesis and mineralogy properties have been precisely studied. Based on the rate of aluminium oxide of the refractory earth of North Semnan mines, a suitable mineral deposit has been selected for more investigation. Using XRD and X RF methods along with electronic and photo microscopes, the refractory earth and heavy minerals of them have been assessed. The elementary laboratory experiments of fragmentation and magnetic separation have been performed. It has been proved that the iron minerals can be separated and, therefore, the quality of the refractory earth can be improved. The separation of titanium minerals has to be investigated with other methods

  14. Bulk Vitrification Castable Refractory Block Protection Study

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Beck, Andrew E.; Brouns, Thomas M.; Caldwell, Dustin D.; Elliott, Michael L.; Matyas, Josef; Minister, Kevin BC; Schweiger, Michael J.; Strachan, Denis M.; Tinsley, Bronnie P.; Hollenberg, Glenn W.

    2005-05-01

    Bulk vitrification (BV) was selected for a pilot-scale test and demonstration facility for supplemental treatment to accelerate the cleanup of low-activity waste (LAW) at the Hanford U.S. DOE Site. During engineering-scale (ES) tests, a small fraction of radioactive Tc (and Re, its nonradioactive surrogate) were transferred out of the LAW glass feed and molten LAW glass, and deposited on the surface and within the pores of the castable refractory block (CRB). Laboratory experiments were undertaken to understand the mechanisms of the transport Tc/Re into the CRB during vitrification and to evaluate various means of CRB protection against the deposition of leachable Tc/Re. The tests used Re as a chemical surrogate for Tc. The tests with the baseline CRB showed that the molten LAW penetrates into CRB pores before it converts to glass, leaving deposits of sulfates and chlorides when the nitrate components decompose. Na2O from the LAW reacts with the CRB to create a durable glass phase that may contain Tc/Re. Limited data from a single CRB sample taken from an ES experiment indicate that, while a fraction of Tc/Re is present in the CRB in a readily leachable form, most of the Tc/Re deposited in the refractory is retained in the form of a durable glass phase. In addition, the molten salts from the LAW, mainly sulfates, chlorides, and nitrates, begin to evaporate from BV feeds at temperatures below 800 C and condense on solid surfaces at temperatures below 530 C. Three approaches aimed at reducing or preventing the deposition of soluble Tc/Re within the CRB were proposed: metal lining, sealing the CRB surface with a glaze, and lining the CRB with ceramic tiles. Metal liners were deemed unsuitable because evaluations showed that they can cause unacceptable distortions of the electric field in the BV system. Sodium silicate and a low-alkali borosilicate glaze were selected for testing. The glazes slowed down molten salt condensate penetration, but did little to reduce the

  15. Oral tranexamic acid lightens refractory melasma.

    Science.gov (United States)

    Tan, Aaron Wei Min; Sen, Priya; Chua, Sze Hon; Goh, Boon Kee

    2017-08-01

    Melasma is a common acquired hyperpigmentary disorder, particularly among Asians and Hispanics, but its exact pathomechanism is poorly understood. Tranexamic acid has been found to lighten melasma by interfering with the interaction of melanocytes and keratinocytes by inhibiting the plasminogen/plasmin system. The aim was to evaluate the therapeutic effects of oral tranexamic acid in the treatment of melasma refractory to topical skin-lightening agents. This retrospective study analyses patients with melasma recruited from a tertiary dermatological centre in Singapore between 1 August 2009 and 31 March 2011. The patients chosen had refractory melasma treated with oral tranexamic acid 250 mg twice daily in addition to pre-existing combination topical therapy. Objective assessment using the physician's global assessment and melasma area and severity index (MASI) scores were performed based on a post-hoc analysis of photographic records by three independent physicians. A paired t-test was used to evaluate the changes in the MASI scores pre-therapy and post-treatment. Statistical significance was defined as P tranexamic acid for a mean period of 3.7 ± 0.33 months, in addition to combination topical therapy. Their mean age was 47.2 ± 1.61 years. The mean MASI scores after tranexamic acid treatment (2.7 ± 1.6) were significantly lower (P tranexamic acid can serve as a safe and useful adjunct in the treatment of refractory melasma. © 2016 The Australasian College of Dermatologists.

  16. Morphology study of refractory carbide powders

    International Nuclear Information System (INIS)

    Vavrda, J.; Blazhikova, Ya.

    1982-01-01

    Refractory carbides were investigated using JSM-U3 electron microscope of Joelco company at 27 KV accelerating voltage. Some photographs of each powder were taken with different enlargements to characterise the sample upon the whole. It was shown that morphological and especially topographic study of powders enables to learn their past history (way of fabrication and treatment). The presence of steps of compact particle fractures and cracks is accompanied by occurence of fine dispersion of carbides subjected to machining after facrication. On the contrary, the character of crystallographic surfaces and features of surface growth testify to the way of crystallization

  17. Refractory overactive bladder: Beyond oral anticholinergic therapy

    Science.gov (United States)

    Glinski, Ronald W.; Siegel, Steven

    2007-01-01

    Objectives: In this review, we discuss the treatment of refractory overactive bladder (OAB) that has not adequately responded to medication therapy and we propose an appropriate care pathway to the treatment of OAB. We also attempt to address the cost of OAB treatments. Materials and Methods: A selective expert review of the current literature on the subject of refractory OAB using MEDLINE was performed and the data is summarized. We also review our experience in treating refractory OAB. The role and outcomes of various treatment options for refractory OAB are discussed and combined therapy with oral anticholinergics is explored. Emerging remedies including intravesical botulinum toxin injection and pudendal neuromodulation are also reviewed, along with conventional surgical options. Results: In general behavioral therapy, pelvic floor electrical stimulation, magnetic therapy and posterior tibial nerve stimulation (PTNS), have shown symptom decreases in 50-80% of patients with OAB. Depending on the study, combination therapy with oral anticholinergics seems to improve efficacy of behavioral therapy and PTNS in approximately 10-30%. In multicenter, long-term randomized controlled trials, sacral neuromodulation has been shown to improve symptoms of OAB and OAB incontinence in up to 80% of the patients treated. Studies involving emerging therapies such as pudendal serve stimulation suggest that there may be a 15-20% increase in efficacy over sacral neuromodulation, but long-term studies are not yet available. Another emerging therapy, botulinum toxin, is also showing similar success in reducing OAB symptoms in 80-90% of patients. Surgical approaches, such as bladder augmentation, are a last resort in the treatment of OAB and are rarely used at this point unless upper tract damage is a concern and all other treatment options have been exhausted. Conclusion: The vast majority of OAB patients can be managed successfully by behavioral options with or without

  18. Refractory overactive bladder: Beyond oral anticholinergic therapy

    Directory of Open Access Journals (Sweden)

    Ronald W Glinski

    2007-01-01

    Full Text Available Objectives: In this review, we discuss the treatment of refractory overactive bladder (OAB that has not adequately responded to medication therapy and we propose an appropriate care pathway to the treatment of OAB. We also attempt to address the cost of OAB treatments. Materials and Methods: A selective expert review of the current literature on the subject of refractory OAB using MEDLINE was performed and the data is summarized. We also review our experience in treating refractory OAB. The role and outcomes of various treatment options for refractory OAB are discussed and combined therapy with oral anticholinergics is explored. Emerging remedies including intravesical botulinum toxin injection and pudendal neuromodulation are also reviewed, along with conventional surgical options. Results: In general behavioral therapy, pelvic floor electrical stimulation, magnetic therapy and posterior tibial nerve stimulation (PTNS, have shown symptom decreases in 50-80% of patients with OAB. Depending on the study, combination therapy with oral anticholinergics seems to improve efficacy of behavioral therapy and PTNS in approximately 10-30%. In multicenter, long-term randomized controlled trials, sacral neuromodulation has been shown to improve symptoms of OAB and OAB incontinence in up to 80% of the patients treated. Studies involving emerging therapies such as pudendal serve stimulation suggest that there may be a 15-20% increase in efficacy over sacral neuromodulation, but long-term studies are not yet available. Another emerging therapy, botulinum toxin, is also showing similar success in reducing OAB symptoms in 80-90% of patients. Surgical approaches, such as bladder augmentation, are a last resort in the treatment of OAB and are rarely used at this point unless upper tract damage is a concern and all other treatment options have been exhausted. Conclusion: The vast majority of OAB patients can be managed successfully by behavioral options with or

  19. Refractory concentrate gold leaching: Cyanide vs. bromine

    Science.gov (United States)

    Dadgar, Ahmad

    1989-12-01

    Gold extraction, recovery and economics for two refractory concentrates were investigated using cyanide and bromine reagents. Gold extractions for cyanide leaching (24-48 hours) and bromine leaching (six hours) were the same and ranged from 94 to 96%. Gold recoveries from bromine pregnant solutions using carbon adsorption, ion exchange, solvent extraction, and zinc and aluminum precipitation methods were better than 99.9%. A preliminary economic analysis indicates that chemical costs for cyanidation and bromine process are 11.70 and 11.60 respectively, per tonne of calcine processed.

  20. Refractory reverse amblyopia with atropine penalization

    Directory of Open Access Journals (Sweden)

    Preeti Ajit Patil

    2010-01-01

    Full Text Available Pharmacological penalization with atropine has been shown to be equally effective as conventional occlusion therapy in the treatment of amblyopia in children. Reverse amblyopia of the sound eye with atropine penalization has been reported before, but is more common in cases where the effect is augmented with optical penalization and is mostly reversible. We report a case of reverse amblyopia with atropine penalization, in a 4-year-old girl, which was refractory to treatment. This report highlights the need for strict monitoring of the vision in the sound eye and regular follow-up in children undergoing amblyopia treatment.

  1. Radioactive iodine-refractory differentiated thyroid cancer: an uncommon but challenging situation

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Angelica; Iglesias, Laura; Schlumberger, Martin J. [Institut Gustave Roussy, Univ. Paris-Saclay, Villejuif (France); Klain, Michele [Univ. Federico II di Napoli (Italy); Pitoia, Fabian [Division of Endocrinology, Hospital de Clinicas, Univ. of Buenos Aires (Argentina)

    2017-01-15

    Radioiodine (RAI)-refractory thyroid cancer is an uncommon entity, occurring with an estimated incidence of 4-5 cases/year/million people. RAI refractoriness is more frequent in older patients, in those with large metastases, in poorly differentiated thyroid cancer, and in those tumors with high 18-fluorodeoxyglucose uptake on PET/CT. These patients have a 10-year survival rate of less than 10%. In recent years, new therapeutic agents with molecular targets have become available, with multi kinase inhibitors (MKIs) being the most investigated drugs. Two of these compounds, sorafenib and lenvatinib, have shown significant objective response rates and have significantly improved the progression-free survival in the two largest published prospective trials on MKI use. However, no overall survival benefit has been achieved yet. This is probably related to the crossover that occurs in most patients who progress on placebo treatment to the open treatment of these studies. In consequence, the challenge is to correctly identify which patients will benefit from these treatments. It is also crucial to understand the appropriate timing to initiate MKI treatment and when to stop it. The purpose of this article is to define RAI refractoriness, to summarize which therapies are available for this condition, and to review how to select patients who are suitable for them. (author)

  2. Extracorporeal membrane oxygenation for refractory cardiac arrest

    Directory of Open Access Journals (Sweden)

    Steven A Conrad

    2017-01-01

    Full Text Available Extracorporeal cardiopulmonary resuscitation (ECPR is the use of rapid deployment venoarterial (VA extracorporeal membrane oxygenation to support systemic circulation and vital organ perfusion in patients in refractory cardiac arrest not responding to conventional cardiopulmonary resuscitation (CPR. Although prospective controlled studies are lacking, observational studies suggest improved outcomes compared with conventional CPR when ECPR is instituted within 30-60 min following cardiac arrest. Adult and pediatric patients with witnessed in-hospital and out-of-hospital cardiac arrest and good quality CPR, failure of at least 15 min of conventional resuscitation, and a potentially reversible cause for arrest are candidates. Percutaneous cannulation where feasible is rapid and can be performed by nonsurgeons (emergency physicians, intensivists, cardiologists, and interventional radiologists. Modern extracorporeal systems are easy to prime and manage and are technically easy to manage with proper training and experience. ECPR can be deployed in the emergency department for out-of-hospital arrest or in various inpatient units for in-hospital arrest. ECPR should be considered for patients with refractory cardiac arrest in hospitals with an existing extracorporeal life support program, able to provide rapid deployment of support, and with resources to provide postresuscitation evaluation and management.

  3. Evaluation of olivine refractories for TES

    Science.gov (United States)

    Gay, B. M.; Cochrane, R. L.; Palmour, H., III; Paisley, M. J.

    1982-02-01

    The principal objectives of this program are to (1) experimentally determine the degree of improvement in thermal and mechanical performance that can be obtained with an olivine thermal storage brick made of domestic materials using advanced processing techniques compared with state-of-the-art as represented by commercial European bricks, (2) conduct an assessment of existing German ceramic process technology and determine its adaptability to domestic raw materials and manufacturing practices, and (3) investigate, on a limited basis, method for further improvement of domestic-olivine brick. To date, accomplishments include (1) installation of improved, computer-based instrumentation, (2) the use of this system to determine performance characteristics of a set of heat storage refractories under cyclic use conditions, (3) acquisition of the services of a knowledgeable European consultant, (4) continued lab-scale process/property optimization studies, and (5) comparative testing of olivine-based and magnesite-based heat storage refractories in the calorimetric test facility at Purdue University.

  4. Engineering data bases for refractory alloys

    International Nuclear Information System (INIS)

    Cooper, R.H. Jr.; Harms, W.O.

    1985-01-01

    Refractory alloys based on niobium, molybdenum, tantalum, and tungsten are required for the multi-100kW(e) space nuclear reactor power concepts that have been assessed in the SP-100 Program because of the extremely high temperatures involved. A review is presented of the technology efforts on the candidate refractory alloys in the areas of availability/fabricability, mechanical properties, irradiation effects, and compatibility. Of the niobium-base alloys, only Nb-1Zr has a data base that is sufficiently comprehensive for the high level of confidence required in the reference-alloy selection process for the reactor concept to be tested in the Ground Engineering System (GES) Phase of the SP-100 Program. Based on relatively short-term tests, the alloy PWC-11 (Nb-1Zr-0.1C) appears to have significantly greater creep strength than Nb-1Zr; however, concerns as to whether this precipitation-hardened alloy will remain thermally stable during seven years of full-power reactor operation need to be resolved. Additional information on the reference GES alloy will be needed for the detailed engineering design of a space power system and the fabrication of prototypical GES test components. Expedient development and demonstration of an adequate total manufacturing capability will be required if a high risk of significant schedule slippages and cost overruns is to be avoided. 4 refs., 1 fig., 3 tabs

  5. Preparation of reactive and refractory metal powders (Paper No. 25)

    International Nuclear Information System (INIS)

    Sundaram, C.V.; Sharma, B.P.; Krishnan, T.S.

    1979-01-01

    In devising processes for the preparation of refractory and reactive metal powders, one has to reckon with many relevant factors. The choice of specific flowsheets is governed by the characteristics of the metal compounds and the reducing agents, the purity required and achievable in the as-reduced powder, the need for further refining of the metal, the possibilities of chemical/physical/mechanical comminution of the purified metal without contamination, and the end application of the powder metal. Micron size zirconium powder used as trigger material in photo-flash bulbs and detonator compositions, tantalum powder of controlled particle size and high purity for the production of electrolytic capacitors, and beryllium metal powder for the preparation of hot pressed powder metallurgy components are illustrative of the variety of reactive metal powders for industrial applications. The work carried out at the Bhabha Atomic Research Centre, Bombay, on the preparation of special metal powders, with particular emphasis on Group IV and V metals and also beryllium is presented. Reduction of metal oxides with alkaline earth metals/hydrides, reduction of metal halides with sodium/magnesium, vacuum arc and electron beam melt purification followed by comminution by hydrogen embrittlement/mechanical comminution are among the processes discussed. (auth.)

  6. Intraepithelial lymphocytes in refractory celiac disease : lost in transition

    NARCIS (Netherlands)

    Schmitz, Frederike

    2014-01-01

    Refractory coeliac disease type II (RCDII) is a severe complication of coeliac disease. Whereas celiac disease can successfully be treated by the strict avoidance of gluten, refractory celiac patients show no remission despite a gluten-free diet. The pathology of RCDII is only partially understood,

  7. Ketogenic diet in 3 cases of childhood refractory status epilepticus

    DEFF Research Database (Denmark)

    Sort, Rune; Born, Alfred P; Pedersen, Karen N.

    2013-01-01

    Refractory status epilepticus (RSE) in children is associated with a significant risk of death or neurological morbidity. Recently attention has been drawn to the ketogenic diet (KD) as an acute treatment, as it has shown promise in controlling seizures in otherwise refractory status epilepticus...

  8. Refractory alloy technology for space nuclear power applications

    International Nuclear Information System (INIS)

    Cooper, R.H. Jr.; Hoffman, E.E.

    1984-01-01

    Purpose of this symposium is twofold: (1) to review and document the status of refractory alloy technology for structural and fuel-cladding applications in space nuclear power systems, and (2) to identify and document the refractory alloy research and development needs for the SP-100 Program in both the short and the long term. In this symposium, an effort was made to recapture the space reactor refractory alloy technology that was cut off in midstream around 1973 when the national space nuclear reactor program began in the early 1960s, was terminated. The six technical areas covered in the program are compatibility, processing and production, welding and component fabrication, mechanical and physical properties, effects of irradiation, and machinability. The refractory alloys considered are niobium, molybdenum, tantalum, and tungsten. Thirteen of the 14 pages have been abstracted separately. The remaining paper summarizes key needs for further R and D on refractory alloys

  9. Refractory alloy technology for space nuclear power applications

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, R.H. Jr.; Hoffman, E.E. (eds.)

    1984-01-01

    Purpose of this symposium is twofold: (1) to review and document the status of refractory alloy technology for structural and fuel-cladding applications in space nuclear power systems, and (2) to identify and document the refractory alloy research and development needs for the SP-100 Program in both the short and the long term. In this symposium, an effort was made to recapture the space reactor refractory alloy technology that was cut off in midstream around 1973 when the national space nuclear reactor program began in the early 1960s, was terminated. The six technical areas covered in the program are compatibility, processing and production, welding and component fabrication, mechanical and physical properties, effects of irradiation, and machinability. The refractory alloys considered are niobium, molybdenum, tantalum, and tungsten. Thirteen of the 14 pages have been abstracted separately. The remaining paper summarizes key needs for further R and D on refractory alloys. (DLC)

  10. NOvel Refractory Materials for High Alkali, High Temperature Environments

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, J.G.; Griffin, R. (MINTEQ International, Inc.)

    2011-08-30

    Refractory materials can be limited in their application by many factors including chemical reactions between the service environment and the refractory material, mechanical degradation of the refractory material by the service environment, temperature limitations on the use of a particular refractory material, and the inability to install or repair the refractory material in a cost effective manner or while the vessel was in service. The objective of this project was to address the need for new innovative refractory compositions by developing a family of novel MgO-Al2O3 spinel or other similar magnesia/alumina containing unshaped refractory composition (castables, gunnables, shotcretes, etc) utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques (in-situ phase formation, altered conversion temperatures, accelerated reactions, etc). This family of refractory compositions would then be tailored for use in high-temperature, highalkaline industrial environments like those found in the aluminum, chemical, forest products, glass, and steel industries. A research team was formed to carry out the proposed work led by Oak Ridge National Laboratory (ORNL) and was comprised of the academic institution Missouri University of Science and Technology (MS&T), and the industrial company MINTEQ International, Inc. (MINTEQ), along with representatives from the aluminum, chemical, glass, and forest products industries. The two goals of this project were to produce novel refractory compositions which will allow for improved energy efficiency and to develop new refractory application techniques which would improve the speed of installation. Also methods of hot installation were sought which would allow for hot repairs and on-line maintenance leading to reduced process downtimes and eliminating the need to cool and reheat process vessels.

  11. Talimogene Laherparepvec and Nivolumab in Treating Patients With Refractory Lymphomas or Advanced or Refractory Non-melanoma Skin Cancers

    Science.gov (United States)

    2018-05-21

    Adenoid Cystic Carcinoma; Adnexal Carcinoma; Apocrine Carcinoma; Eccrine Porocarcinoma; Extraocular Cutaneous Sebaceous Carcinoma; Hidradenocarcinoma; Keratoacanthoma; Malignant Sweat Gland Neoplasm; Merkel Cell Carcinoma; Microcystic Adnexal Carcinoma; NK-Cell Lymphoma, Unclassifiable; Non-Melanomatous Lesion; Paget Disease; Papillary Adenocarcinoma; Primary Cutaneous Mucinous Carcinoma; Refractory Anaplastic Large Cell Lymphoma; Refractory Mature T-Cell and NK-Cell Non-Hodgkin Lymphoma; Refractory Mycosis Fungoides; Refractory Primary Cutaneous T-Cell Non-Hodgkin Lymphoma; Refractory T-Cell Non-Hodgkin Lymphoma; Sezary Syndrome; Signet Ring Cell Carcinoma; Skin Basal Cell Carcinoma; Skin Basosquamous Cell Carcinoma; Skin Squamous Cell Carcinoma; Spiradenocarcinoma; Squamous Cell Carcinoma of Unknown Primary Origin; Stage III Skin Cancer; Stage IV Skin Cancer; Sweat Gland Carcinoma; Trichilemmocarcinoma; Vulvar Squamous Cell Carcinoma

  12. A view on the European Refractory Industry

    Directory of Open Access Journals (Sweden)

    Kreuels, N.

    2009-10-01

    Full Text Available The author refers to the basic role of the Refractory Industry within the context from raw material to the use of products and outlines the major important political, economic and technical impact of the future.

    En el presente artículo se revisa la situación actual de la industria refractaria en Europa y se dan unas perspectivas de futuro para el sector, destacando su importancia política, económica y técnica. Dentro de este contexto se da una visión tanto de la situación de las materias primas como de los distintos uso de los productos refractarios y sus tendencias de futuro.

  13. Gastric cancer associated with refractory cytomegalovirus gastritis.

    Science.gov (United States)

    Ueno, Masayuki; Shimodate, Yuichi; Yamamoto, Shumpei; Yamamoto, Hiroshi; Mizuno, Motowo

    2017-12-01

    Cytomegalovirus (CMV) sometimes causes gastritis, especially in immunocompromised patients, but whether CMV gastritis promotes the development of gastric cancer is unknown. Here, we report a case of gastric cancer that developed in the presence of CMV gastritis, which had been present for at least 4 years and was refractory to treatment. An 80-year-old woman had noted epigastric discomfort and appetite loss. Esophagogastroduodenoscopy revealed a shallow geographical ulcer extending from the upper body to the pylorus. Histological findings of the biopsy and serology were suggestive of CMV gastritis. Serum anti-Helicobacter pylori antibody test was positive, suggesting co-infection with CMV and H. pylori. Her gastritis was unimproved with repeated antiviral therapy and eradication of H. pylori. Thirty months later, wide-spread gastric cancer had developed. We suggest the possibility that the addition of chronic inflammation of CMV infection to H. pylori-induced gastritis facilitated the development of gastric cancer.

  14. Directed light fabrication of refractory metals

    International Nuclear Information System (INIS)

    Lewis, G.K.; Thoma, D.J.; Nemec, R.B.; Milewski, J.O.

    1997-01-01

    Directed Light Fabrication (DLF) is a metal, rapid fabrication process that fuses metal powders to full density into a solid replica of a computer modeled component. It has been shown feasible for forming nearly any metal and also intermetallics to near net shape with a single process. DLF of refractory pure metals is feasible, bypassing the extensive series of conventional processing steps used for processing these high melting point materials. Tungsten, tantalum, and rhenium were processed and show a continuous resolidified microstructure. Porosity was a problem for the tantalum and rhenium powders produced by chemical reduction processes but not for the tungsten powder spherodized in a plasma arc. Chemical analysis of powder compared to the DLF deposit showed reductions in carbon, oxygen and hydrogen, indicating that process parameters may also be optimized for evolution of residual gases in the deposits

  15. Status Epilepticus and Refractory Status Epilepticus Management

    Science.gov (United States)

    Abend, Nicholas S.; Bearden, David; Helbig, Ingo; McGuire, Jennifer; Narula, Sona; Panzer, Jessica A.; Topjian, Alexis; Dlugos, Dennis J.

    2014-01-01

    Status epilepticus (SE) describes persistent or recurring seizures without a return to baseline mental status, and is a common neurologic emergency. SE can occur in the context of epilepsy or may be symptomatic of a wide range of underlying etiologies. The clinician’s aim is to rapidly institute care that simultaneously stabilizes the patient medically, identifies and manages any precipitant conditions, and terminates seizures. Seizure management involves “emergent” treatment with benzodiazepines followed by “urgent” therapy with other anti-seizure medications. If seizures persist then refractory SE is diagnosed and management options include additional anti-seizure medications or infusions of midazolam or pentobarbital. This paper reviews the management of pediatric SE and RSE. PMID:25727508

  16. Transscleral Diode Laser Cyclophotocoagulation in Refractory Glaucoma

    Directory of Open Access Journals (Sweden)

    Gülfidan Bitirgen

    2012-12-01

    Full Text Available Pur po se: To evaluate the safety and efficacy of transscleral diode laser cyclophotocoagulation (TSDLC in advanced glaucoma refractory to medical or surgical treatment. Ma te ri al and Met hod: The data of subjects who were treated with TSDLC between 2009 and 2011 were retrospectively reviewed. Intraocular pressure before and after treatment, visual acuity, the number of medications and complications were analysed. Success was defined as final IOP of 6-22 mmHg with or without antiglaucomatous medications. Re sults: Thirty seven eyes of 37 patients were included in the study. Mean age of patients and mean follow-up time were 61.73±17.13 years (range: 19-80 years and 8.06±5.81 months (range: 3-22 months, respectively. Mean pretreatment IOP was 38.68±8.94 mmHg and IOP was 26.46±11.34 mmHg (p <0.01 at the second week, whereas it was 24.97±10.84 mmHg (p<0.01 at the last visit. IOP of less than 22 mmHg was achieved in 40.5% of eyes at the last visit. Mean treatment number per eye was 1.48±0.73, and more than one treatment was required in 13 (35.1% eyes. Preoperative and postoperative mean total antiglaucomatous medications were 3.14±1.18 and 2.76±1.23, respectively. No phthisis bulbi or persistent hypotonia developed during the follow-up period. Dis cus si on: TSDLC is an effective and safe method for the treatment of refractory glaucoma. It also served to reduce the number of antiglaucoma medications, thus improving both the quality of life of the patients and their compliance to therapy. (Turk J Ophthalmol 2012; 42: 434-7

  17. Destruction of Refractory Carbon in Protoplanetary Disks

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Dana E.; Blake, Geoffrey A. [Division of Geological and Planetary Sciences, California Institute of Technology, 1200 E. California Blvd., Pasadena, CA 91125 (United States); Bergin, Edwin A. [Department of Astronomy, University of Michigan, 1085 S. University, Ann Arbor, MI 48109-1107 (United States); Ciesla, Fred J. [Department of Geophysical Sciences, The University of Chicago, 5734 South Ellis Ave., Chicago, IL 60637 (United States); Visser, Ruud [European Southern Observatory, Karl-Schwarzschild-Str. 2, D-85748, Garching (Germany); Lee, Jeong-Eun [School of Space Research, Kyung Hee University, 1732, Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 17104 (Korea, Republic of)

    2017-08-10

    The Earth and other rocky bodies in the inner solar system contain significantly less carbon than the primordial materials that seeded their formation. These carbon-poor objects include the parent bodies of primitive meteorites, suggesting that at least one process responsible for solid-phase carbon depletion was active prior to the early stages of planet formation. Potential mechanisms include the erosion of carbonaceous materials by photons or atomic oxygen in the surface layers of the protoplanetary disk. Under photochemically generated favorable conditions, these reactions can deplete the near-surface abundance of carbon grains and polycyclic aromatic hydrocarbons by several orders of magnitude on short timescales relative to the lifetime of the disk out to radii of ∼20–100+ au from the central star depending on the form of refractory carbon present. Due to the reliance of destruction mechanisms on a high influx of photons, the extent of refractory carbon depletion is quite sensitive to the disk’s internal radiation field. Dust transport within the disk is required to affect the composition of the midplane. In our current model of a passive, constant- α disk, where α = 0.01, carbon grains can be turbulently lofted into the destructive surface layers and depleted out to radii of ∼3–10 au for 0.1–1 μ m grains. Smaller grains can be cleared out of the planet-forming region completely. Destruction may be more effective in an actively accreting disk or when considering individual grain trajectories in non-idealized disks.

  18. Esquizofrenia refratária Refractory schizophrenia

    Directory of Open Access Journals (Sweden)

    Helio Elkis

    2007-10-01

    Full Text Available OBJETIVO: O propósito deste artigo é o de revisar vários aspectos da esquizofrenia refratária levando em conta questões relacionadas à definição, aspectos clínicos, correlatos psicobiológicos, tratamentos farmacológicos e não farmacológicos, assim como preditores de resposta terapêutica. MÉTODO: Pesquisa no Medline, assim como artigos dos autores. RESULTADOS E CONCLUSÕES: Pelo menos um terço dos pacientes com esquizofrenia são refratários a tratamento com antipsicóticos e as evidências apontam a clozapina em monoterapia como a principal opção nesses casos. A politerapia com antipsicóticos não tem apoio em evidências. Ensaios clínicos recentes mostraram que a potencialização da clozapina com outros antipsicóticos não é superior ao placebo.OBJECTIVE: The aim of the present paper is to review the various aspects of refractory schizophrenia regarding issues such as definitions, clinical aspects, psychobiological correlates, pharmacological and non-pharmacological treatment options and predictors of treatment response. METHOD: Medline search as well as articles of the authors. RESULTS AND CONCLUSIONS: Refractory schizophrenia affects at least one third of patients with schizophrenia and the best evidence shows that is monotherapy with clozapine remains the mainstay for the treatment of such condition. Antipsychotic polipharmacy is not supported by current evidence and recent clinical trials have shown that clozapine augmentation with antipsychotics has no benefit over placebo.

  19. High-Density Infrared Surface Treatments of Refractories

    Energy Technology Data Exchange (ETDEWEB)

    Tiegs, T.N.

    2005-03-31

    Refractory materials play a crucial role in all energy-intensive industries and are truly a crosscutting technology for the Industries of the Future (IOF). One of the major mechanisms for the degradation of refractories and a general decrease in their performance has been the penetration and corrosion by molten metals or glass. Methods and materials that would reduce the penetration, wetting, and corrosive chemistry would significantly improve refractory performance and also maintain the quality of the processed liquid, be it metal or glass. This report presents the results of an R&D project aimed at investigating the use of high-density infrared (HDI) heating to surface treat refractories to improve their performance. The project was a joint effort between Oak Ridge National Laboratory (ORNL) and the University of Missouri-Rolla (UMR). HDI is capable of heating the near-surface region of materials to very high temperatures where sintering, diffusion, and melting can occur. The intended benefits of HDI processing of refractories were to (1) reduce surface porosity (by essentially sealing the surface to prevent liquid penetration), (2) allow surface chemistry changes to be performed by bonding an adherent coating onto the underlying refractory (in order to inhibit wetting and/or improve corrosion resistance), and (3) produce noncontact refractories with high-emissivity surface coatings.

  20. Refractory myasthenia gravis - clinical profile, comorbidities and response to rituximab.

    Science.gov (United States)

    Sudulagunta, Sreenivasa Rao; Sepehrar, Mona; Sodalagunta, Mahesh Babu; Settikere Nataraju, Aravinda; Bangalore Raja, Shiva Kumar; Sathyanarayana, Deepak; Gummadi, Siddharth; Burra, Hemanth Kumar

    2016-01-01

    Introduction: Myasthenia gravis (MG) is an antibody mediated autoimmune neuromuscular disorder characterized by fatigable muscle weakness. A proportion of myasthenia gravis patients are classified as refractory due to non responsiveness to conventional treatment. This retrospective study was done to evaluate clinical profile, epidemiological, laboratory, and features of patients with MG and mode of management using rituximab and complications. Methods: Data of myasthenia gravis patients admitted or presented to outpatient department (previous medical records) with MG between January 2008 and January 2016 were included. A total of 512 patients fulfilled the clinical and diagnostic criteria of myasthenia gravis of which 76 patients met the diagnostic certainty for refractory myasthenia gravis and were evaluated. Results: Out of 76 refractory MG patients, 53 (69.73%) patients fulfilled all the three defined criteria. The median age of onset of the refractory MG group was 36 years with a range of 27-53 years. In our study 25 patients (32.89%) belonged to the age group of 21-30 years. Anti-MuSK antibodies were positive in 8 non-refractory MG patients (2.06%) and 36 refractory MG patients (47.36%). Mean HbA 1C was found to be 8.6±2.33. The dose of administered prednisone decreased by a mean of 59.7% ( p =3.3x10 -8 ) to 94.6% ( p =2.2x10 -14 ) after the third cycle of rituximab treatment. Conclusion: The refractory MG patients are most commonly female with an early age of onset, anti-MuSK antibodies, and thymomas. Refractory MG patients have higher prevalence and poor control (HbA 1C >8%) of diabetes mellitus and dyslipidemia probably due to increased steroid usage. Rituximab is very efficient in treatment of refractory MG with adverse effects being low.

  1. Organolanthanoid compounds

    International Nuclear Information System (INIS)

    Schumann, H.

    1984-01-01

    Up to little more than a decade ago organolanthanoid compounds were still a curiosity. Apart from the description of an isolated number of cyclopentadienyl and indenyl derivatives, very few significant contributions had been made to this interesting sector of organometallic chemistry. However, subsequent systematic studies using modern preparative and analytical techniques, together with X-ray single crystal structure determinations, enabled the isolation and characterization of a large number of very interesting homoleptic and heteroleptic compounds in which the lanthanoid is bound to hydrogen, to substituted or unsubstituted cyclopentadienyl groups, to allyl or alkynyl groups, or even to phosphorus ylides, trimethylsilyl, and carbonylmetal groups. These compounds, which are all extremely sensitive to oxygen and water, open up new possibilities in the field of catalysis and have great potential in organic synthesis - as recent studies with pentamethylcyclopentadienyl derivatives, organolanthanoid(II) compounds, and hexamethyllanthanoid complexes have already shown. (orig.) [de

  2. Typical corrosion of alumina refractory in aluminum reflow oven

    International Nuclear Information System (INIS)

    Baldo, Jaoa B.

    2014-01-01

    The refractory linings of furnaces for secondary melting of aluminum, are exposed to intense attack by the molten metal. This occurs, because molten aluminum has a strong reducing power over the refractory oxide components, particularly Fe 2 O 3 , SiO 2 and TiO 2 . In this work, based on X-ray diffraction and scanning electron microscopy, it is presented a post mortem study of the mechanisms that lead to a premature wear of a 80% Al2O3 chemically bonded refractory bricks, used in the metal line of an aluminum re-melting furnace. The SEM analysis demonstrated that the oxides SiO 2 and TiO 2 contained in the refractory were reduced and transformed into their metallic elements causing an intense structural spalling. (author)

  3. Proceedings of the Conference on Refractory Alloying Elements in Superalloys

    International Nuclear Information System (INIS)

    1984-01-01

    Some papers about the use of refractory metals in superalloys are presented. Mechanical properties, thermodynamics properties, use for nuclear fuels and corrosion resistance of those alloys are studied. (E.G.) [pt

  4. Lightweight cordierite–mullite refractories with low coefficients of ...

    Indian Academy of Sciences (India)

    of thermal conductivity and high mechanical properties ... compositions and microstructures of lightweight refractories were measured by X-ray .... of matrices were determined by calibration with EDAX ZAF .... Guzman I Ya 2003 Glass Ceram.

  5. Ketogenic Diet in Super-Refractory Status Epilepticus

    OpenAIRE

    Smith, Garnett; Press, Craig A.

    2017-01-01

    Researchers from the Children’s National Health System in Washington, D.C. studied the feasibility, rate of complications, and effect on seizures of initiating the Ketogenic Diet (KD) in pediatric patients with Super-Refractory Status Epilepticus (SRSE).

  6. Effectiveness of botulinum toxin A in treatment of refractory erythromelalgia

    Directory of Open Access Journals (Sweden)

    Kuan-Hsiang Lin

    2013-05-01

    Full Text Available Erythromelalgia is characterized by intense burning pain, erythema, and heat in affected areas after precipitating factors such as warm temperature or stress. It is refractory to treatment in some situations. We describe a woman with adenosquamous cell carcinoma of the lung and medically refractory erythromelalgia. The symptoms of erythromelalgia presented as refractory to any medical treatment. Due to the unresponsive nature of her condition, botulinum toxin type A (onabotulinumtoxin A was injected over both of her cheeks, periodically for six cycles. Her symptoms responded dramatically to subcutaneous and intradermal injection of botulinum toxin type A. Repetitive injection demonstrated consistent and reproducible responses, and the efficacy was maintained for approximately 1 month. No adverse effects or complications were noted. Botulinum toxin type A might be safe and effective as an alternative treatment for refractory erythromelalgia, but further large-scale studies are required.

  7. Refractory absence epilepsy associated with GLUT-1 deficiency syndrome.

    LENUS (Irish Health Repository)

    Byrne, Susan

    2011-05-01

    GLUT-1 deficiency syndrome (GLUT-1 DS) is a disorder of cerebral glucose transport associated with early infantile epilepsy and microcephaly. We report two boys who presented with refractory absence epilepsy associated with hypoglycorrhachia, both of whom have genetically confirmed GLUT-1 DS. We propose that these children serve to expand the phenotype of GLUT-1 DS and suggest that this condition should be considered as a cause of refractory absence seizures in childhood.

  8. [Therapy-resistant and therapy-refractory arterial hypertension].

    Science.gov (United States)

    Wallbach, M; Koziolek, M J

    2018-05-02

    Therapy-resistant and therapy-refractory arterial hypertension differ in prevalence, pathogenesis, prognosis and therapy. In both cases, a structured approach is required, with the exclusion of pseudoresistance and, subsequently, secondary hypertension. Resistant hypertension has been reported to be more responsive to intensified diuretic therapy, whereas refractory hypertension is presumed to require sympathoinhibitory therapy. Once the general measures and the drug-based step-up therapy have been exhausted, interventional procedures are available.

  9. Response properties of the refractory auditory nerve fiber.

    Science.gov (United States)

    Miller, C A; Abbas, P J; Robinson, B K

    2001-09-01

    The refractory characteristics of auditory nerve fibers limit their ability to accurately encode temporal information. Therefore, they are relevant to the design of cochlear prostheses. It is also possible that the refractory property could be exploited by prosthetic devices to improve information transfer, as refractoriness may enhance the nerve's stochastic properties. Furthermore, refractory data are needed for the development of accurate computational models of auditory nerve fibers. We applied a two-pulse forward-masking paradigm to a feline model of the human auditory nerve to assess refractory properties of single fibers. Each fiber was driven to refractoriness by a single (masker) current pulse delivered intracochlearly. Properties of firing efficiency, latency, jitter, spike amplitude, and relative spread (a measure of dynamic range and stochasticity) were examined by exciting fibers with a second (probe) pulse and systematically varying the masker-probe interval (MPI). Responses to monophasic cathodic current pulses were analyzed. We estimated the mean absolute refractory period to be about 330 micros and the mean recovery time constant to be about 410 micros. A significant proportion of fibers (13 of 34) responded to the probe pulse with MPIs as short as 500 micros. Spike amplitude decreased with decreasing MPI, a finding relevant to the development of computational nerve-fiber models, interpretation of gross evoked potentials, and models of more central neural processing. A small mean decrement in spike jitter was noted at small MPI values. Some trends (such as spike latency-vs-MPI) varied across fibers, suggesting that sites of excitation varied across fibers. Relative spread was found to increase with decreasing MPI values, providing direct evidence that stochastic properties of fibers are altered under conditions of refractoriness.

  10. Refractory metal joining for first wall applications

    Science.gov (United States)

    Cadden, C. H.; Odegard, B. C.

    2000-12-01

    The potential use of high temperature coolant (e.g. 900°C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000°C to 1275°C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

  11. Design of Refractory High-Entropy Alloys

    Science.gov (United States)

    Gao, M. C.; Carney, C. S.; Doğan, Ö. N.; Jablonksi, P. D.; Hawk, J. A.; Alman, D. E.

    2015-11-01

    This report presents a design methodology for refractory high-entropy alloys with a body-centered cubic (bcc) structure using select empirical parameters (i.e., enthalpy of mixing, atomic size difference, Ω-parameter, and electronegativity difference) and CALPHAD approach. Sixteen alloys in equimolar compositions ranging from quinary to ennead systems were designed with experimental verification studies performed on two alloys using x-ray diffraction, energy-dispersive spectroscopy, and scanning electron microscopy. Two bcc phases were identified in the as-cast HfMoNbTaTiVZr, whereas multiple phases formed in the as-cast HfMoNbTaTiVWZr. Observed elemental segregation in the alloys qualitatively agrees with CALPHAD prediction. Comparisons of the thermodynamic mixing properties for liquid and bcc phases using the Miedema model and CALPHAD are presented. This study demonstrates that CALPHAD is more effective in predicting HEA formation than empirical parameters, and new single bcc HEAs are suggested: HfMoNbTiZr, HfMoTaTiZr, NbTaTiVZr, HfMoNbTaTiZr, HfMoTaTiVZr, and MoNbTaTiVZr.

  12. Ketogenic Diet in Refractory Childhood Epilepsy

    Directory of Open Access Journals (Sweden)

    Amerins Weijenberg MD

    2018-05-01

    Full Text Available Background: Ketogenic diet in children with epilepsy has a considerable impact on daily life and is usually adopted for at least 3 months. Our aim was to evaluate whether the introduction of an all-liquid ketogenic diet in an outpatient setting is feasible, and if an earlier assessment of its efficacy can be achieved. Methods: The authors conducted a prospective, observational study in a consecutive group of children with refractory epilepsy aged 2 to 14 years indicated for ketogenic diet. Ketogenic diet was started as an all-liquid formulation of the classical ketogenic diet, KetoCal 4:1 LQ, taken orally or by tube. After 6 weeks, the liquid diet was converted into solid meals. The primary outcome parameter was time-to-response (>50% seizure reduction. Secondary outcome parameters were time to achieve stable ketosis, the number of children showing a positive response, and the retention rate at 26 weeks. Results: Sixteen children were included. Four of them responded well with respect to seizure frequency, the median time-to-response was 14 days (range 7-28 days. The mean time to achieve stable ketosis was 7 days. The retention rate at 26 weeks was 50%. Of the 8 children who started this protocol orally fed, 6 completed it without requiring a nasogastric tube. Conclusions: Introduction of ketogenic diet with a liquid formulation can be accomplished in orally fed children without major complications. It allowed for fast and stable ketosis.

  13. Refractory metal joining for first wall applications

    International Nuclear Information System (INIS)

    Cadden, C.H.; Odegard, B.C.

    2000-01-01

    The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking

  14. Refractory metal joining for first wall applications

    Energy Technology Data Exchange (ETDEWEB)

    Cadden, C.H. E-mail: chcadde@sandia.gov; Odegard, B.C

    2000-12-01

    The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

  15. Ketogenic Diet in Refractory Childhood Epilepsy

    Science.gov (United States)

    Weijenberg, Amerins; van Rijn, Margreet; de Koning, Tom J.; Brouwer, Oebele F.

    2018-01-01

    Background: Ketogenic diet in children with epilepsy has a considerable impact on daily life and is usually adopted for at least 3 months. Our aim was to evaluate whether the introduction of an all-liquid ketogenic diet in an outpatient setting is feasible, and if an earlier assessment of its efficacy can be achieved. Methods: The authors conducted a prospective, observational study in a consecutive group of children with refractory epilepsy aged 2 to 14 years indicated for ketogenic diet. Ketogenic diet was started as an all-liquid formulation of the classical ketogenic diet, KetoCal 4:1 LQ, taken orally or by tube. After 6 weeks, the liquid diet was converted into solid meals. The primary outcome parameter was time-to-response (>50% seizure reduction). Secondary outcome parameters were time to achieve stable ketosis, the number of children showing a positive response, and the retention rate at 26 weeks. Results: Sixteen children were included. Four of them responded well with respect to seizure frequency, the median time-to-response was 14 days (range 7-28 days). The mean time to achieve stable ketosis was 7 days. The retention rate at 26 weeks was 50%. Of the 8 children who started this protocol orally fed, 6 completed it without requiring a nasogastric tube. Conclusions: Introduction of ketogenic diet with a liquid formulation can be accomplished in orally fed children without major complications. It allowed for fast and stable ketosis. PMID:29872664

  16. Optimizing thermal shock resistance of layered refractories

    Energy Technology Data Exchange (ETDEWEB)

    Hein, Jarno; Kuna, Meinhard [Institute of Mechanics and Fluid Dynamics, Technical University Bergakademie Freiberg, Lampadiusstrasse 4, 09599 Freiberg (Germany)

    2012-06-15

    Severe thermal shocks may cause critical thermal stresses and failure in refractories or ceramic materials. To increase the thermal shock resistance, layered material structures are suggested. In order to optimize properties of these alternative structures, thermo-mechanical simulations are required. In this study, a finite difference method (FDM) is used for solving the partial differential equation of heat conduction with spatially varying parameters. The optimization of the strip's thermal shock resistance is exemplarily done on a 10 layered strip subjected to constant temperature jump on the top surface. Each layer can be set with different porous Al{sub 2}O{sub 3} and MgO ceramics, whose material properties are theoretically determined. In this study, an improved optimization method is developed that consists of a combination and sequence of Monte Carlo simulations and evolution strategies to overcome certain disadvantages of both techniques. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  17. Production of lightweight refractory material by hydrothermal process

    International Nuclear Information System (INIS)

    Sulejmani, Ramiz B.

    2002-01-01

    Many different processes of production of lightweight refractories are well known over the World. Traditional production of lightweight refractories is by addition of combustibles or by a special frothing process. This work is concerned with hydrothermal of lightweight refractories from rice husk ash. The rice husk ash, used in present investigations were from Kocani region, R. Macedonia. The chemical analysis of the rice husk ash shows that it contains 91,8 - 93,7% SiO 2 and some alkaline and alkaline earth oxides. Microscopic and X - ray diffraction examinations of the rice husk ash have shown that it is composed of cristobalite, tridimite and amorphous silica. The composition of the mixture for lightweight refractory brick production is 93,4% rice husk ash and 6,6% Ca(OH) 2 . The mixtures were well mixed, moistened and pressed at 5 - 10 MPa. The hydrothermal reactions between calcium hydroxide and rice husk ash over the temperature range 80 - 160 o C were investigated. The period of autoclave treatment was from 2 to 72 h. After the hydrothermal treatment of the samples, the mineralogical composition, bulk density, density, cold crushing strength, porosity, refractoriness and thermal expansion were examined. Analysing the properties of the obtained samples it can be concluded that from rice husk ash and calcium hydroxide under hydrothermal condition it is possible to obtain lightweight acid refractory material with high quality.(Author)

  18. Development of AZS refractories for the glass industry

    International Nuclear Information System (INIS)

    Guzman, A.M.; Rodriguez, P.

    2004-01-01

    Refractory materials can support high temperatures, thermal strength and the contact with aggressive environments, for this reason they are widely used in the cement, glass and steel industry. Commercial AZS (alumina-zirconia-silica) refractories are a good alternative in refractory materials for the glass industry' because they can support the aggressive conditions during liquid processing of glass. However, another problem encountered in glass industry is contamination by refractory' material that fall into the molten glass, which can produce a series of defects in the final product. This research was conducted to develop new formulations of AZS refractories with different amounts of ZrO 2 with the purpose of improving the characteristics, properties and the work conditions in the glass melting furnaces and, at the same time, lower the costs this type of refractories. The results obtained indicate that the composition with low content of ZrO 2 can provide better properties than the commercial product, with some modifications in the particle size distribution. Copyright (2004) AD-TECH - International Foundation for the Advancement of Technology Ltd

  19. Multipurpose Compound

    Science.gov (United States)

    1983-01-01

    Specially formulated derivatives of an unusual basic compound known as Alcide may be the answer to effective treatment and prevention of the disease bovine mastitis, a bacterial inflammation of a cow's mammary gland that results in loss of milk production and in extreme cases, death. Manufactured by Alcide Corporation the Alcide compound has killed all tested bacteria, virus and fungi, shortly after contact, with minimal toxic effects on humans or animals. Alcide Corporation credits the existence of the mastitis treatment/prevention products to assistance provided the company by NERAC, Inc.

  20. Polymer compound

    NARCIS (Netherlands)

    1995-01-01

    A Polymer compound comprising a polymer (a) that contains cyclic imidesgroups and a polymer (b) that contains monomer groups with a 2,4-diamino-1,3,5-triazine side group. According to the formula (see formula) whereby themole percentage ratio of the cyclic imides groups in the polymer compoundwith

  1. Mesoionic Compounds

    Indian Academy of Sciences (India)

    Organic Chemistry. Kamatak University,. Dharwad. Her research interests are synthesis, reactions and synthetic utility of sydnones. She is currently working on electrochemical and insecticidal/antifungal activities for some of these compounds. Keywords. Aromaticity, mesoionic hetero- cycles, sydnones, tandem re- actions.

  2. Laboratory studies of refractory metal oxide smokes

    International Nuclear Information System (INIS)

    Nuth, J.A.; Nelson, R.N.; Donn, B.

    1989-01-01

    Studies of the properties of refractory metal oxide smokes condensed from a gas containing various combinations of SiH4, Fe(CO)5, Al(CH3)3, TiCl4, O2 and N2O in a hydrogen carrier stream at 500 K greater than T greater than 1500 K were performed. Ultraviolet, visible and infrared spectra of pure, amorphous SiO(x), FeO(x), AlO(x) and TiO(x) smokes are discussed, as well as the spectra of various co-condensed amorphous oxides, such as FE(x)SiO(y) or Fe(x)AlO(y). Preliminary studies of the changes induced in the infrared spectra of iron-containing oxide smokes by vacuum thermal annealing suggest that such materials become increasingly opaque in the near infrared with increased processing: hydration may have the opposite effect. More work on the processing of these materials is required to confirm such a trend: this work is currently in progress. Preliminary studies of the ultraviolet spectra of amorphous Si2O3 and MgSiO(x) smokes revealed no interesting features in the region from 200 to 300 nm. Studies of the ultraviolet spectra of both amorphous, hydrated and annealed SiO(x), TiO(x), AlO(x) and FeO(x) smokes are currently in progress. Finally, data on the oxygen isotopic composition of the smokes produced in the experiments are presented, which indicate that the oxygen becomes isotopically fractionated during grain condensation. Oxygen in the grains is as much as 3 percent per amu lighter than the oxygen in the original gas stream. The authors are currently conducting experiments to understand the mechanism by which fractionation occurs

  3. Managing refractory Crohn's disease: challenges and solutions

    Directory of Open Access Journals (Sweden)

    Tanida S

    2015-04-01

    Full Text Available Satoshi Tanida, Keiji Ozeki, Tsutomu Mizoshita, Hironobu Tsukamoto, Takahito Katano, Hiromi Kataoka, Takeshi Kamiya, Takashi Joh Department of Gastroenterology and Metabolism, Nagoya City University Graduate School of Medical Sciences, Aichi Prefecture, Japan Abstract: The goals of treatment for active Crohn's disease (CD are to achieve clinical remission and improve quality of life. Conventional therapeutics for moderate-to-severe CD include 5-aminosalicylic acid, corticosteroids, purine analogs, azathioprine, and 6-mercaptopurine. Patients who fail to respond to conventional therapy are treated with tumor necrosis factor (TNF-α inhibitors such as infliximab and adalimumab, but their efficacy is limited due to primary nonresponse or loss of response. It is suggested that this requires switch to another TNF-α inhibitor, a combination therapy with TNF-α blockade plus azathioprine, or granulocyte and monocyte adsorptive apheresis, and that other therapeutic options having different mechanisms of action, such as blockade of inflammatory cytokines or adhesion molecules, are needed. Natalizumab and vedolizumab are neutralizing antibodies directed against integrin a4 and a4ß7, respectively. Ustekinumab is a neutralizing antibody directed against the receptors for interleukin-12 and interleukin-23. Here, we provide an overview of therapeutic treatments that are effective and currently available for CD patients, as well as some that likely will be available in the near future. We also discuss the advantages of managing patients with refractory CD using a combination of TNF-α inhibitors plus azathioprine or intensive monocyte adsorptive apheresis. Keywords: adalimumab, granulocyte and monocyte adsorptive apheresis, combination therapy, complete remission

  4. Intrathecal chemotherapy for refractory disseminated medulloblastoma.

    Science.gov (United States)

    Yoshimura, Junichi; Nishiyama, Kenichi; Mori, Hiroshi; Takahashi, Hideaki; Fujii, Yukihiko

    2008-05-01

    To analyze the effect of intrathecal (IT) chemotherapy for disseminated medulloblastoma. Twenty-one patients received IT chemotherapy using the chemotherapeutic agents of methotrexate (MTX) and nitrosoureas (ACNU, MCNU) including nine patients for residual leptomeningeal lesions after initial surgery and radiation, and 12 for a recurrence with leptomeningeal dissemination. Of these 21 patients, 12 received a lumbar and/or ventricular bolus injection of the chemotherapeutic agents, one received the ventriculolumbar perfusion of the agents, and eight received both the perfusion and bolus injection. The doses ranged from 6-7 mg/m(2) of ACNU for perfusion and 3-3.5 mg/m(2) of ACNU, MCNU, or MTX for the bolus injection, and the cycles were administered from 3 to 12 times for perfusion and from 5 to 54 times for the bolus injection. The effects of chemotherapy were assessed by both radiological and cytological examinations, and the clinical symptoms were also assessed. Radiological and/or cytological responses were observed in 10 of 21 patients (47.6%), including seven cases demonstrating a complete remission. The 5-year overall survival rate and 5-year survival rate after dissemination were 61.5 and 46.4%, respectively. Five patients who received a lumbar bolus injection of nitrosoureas experienced paraplegia and double incontinence. One patient who received a ventricular injection of nitrosoureas experienced truncal ataxia. IT chemotherapy was found to be effective in some cases with refractory disseminated medulloblastoma and it seems to be an appropriate treatment choice for leptomeningeal recurrence. However, the frequent bolus injections of nitrosoureas should be avoided to prevent the side effects.

  5. Directed light fabrication of refractory metals and alloys

    International Nuclear Information System (INIS)

    Fonseca, J.C.; Lewis, G.K.; Dickerson, P.G.; Nemec, R.B.

    1999-01-01

    This report covers deposition of refractory pure metals and alloys using the Directed Light Fabrication (DLF) process and represents progress in depositing these materials through September 1998. In extending the DLF process technology to refractory metals for producing fully dense, structurally sound deposits, several problems have become evident. (1) Control of porosity in DLF-deposited refractory metal is difficult because of gases, apparently present in commercially purchased refractory metal powder starting materials. (2) The radiant heat from the molten pool during deposition melts the DLF powder feed nozzle. (3) The high reflectivity of molten refractory metals, at the Nd-YAG laser wavelength (1.06microm), produces damaging back reflections to the optical train and fiber optic delivery system that can terminate DLF processing. (4) The current limits on the maximum available laser power to prevent back reflection damage limit the parameter range available for densification of refractory metals. The work to date concentrated on niobium, W-25Re, and spherodized tungsten. Niobium samples, made from hydride-dehydride powder, had minimal gas porosity and the deposition parameters were optimized; however, test plates were not made at this time. W-25Re samples, containing sodium and potassium from a precipitation process, were made and porosity was a problem for all samples although minimized with some process parameters. Deposits made from potassium reduced tungsten that was plasma spherodized were made with minimized porosity. Results of this work indicate that further gas analysis of starting powders and de-gassing of starting powders and/or gas removal during deposition of refractory metals is required

  6. Directed light fabrication of refractory metals and alloys

    International Nuclear Information System (INIS)

    Fonseca, J.C.; Lewis, G.K.; Dickerson, P.G.; Nemec, R.B.

    1999-01-01

    This report covers work performed under Order No. FA0000020 AN Contract DE-AC12-76SN00052 for deposition of refractory pure metals and alloys using the Directed Light Fabrication (DLF) process and represents the progress in depositing these materials through September 1998. In extending the DLF process technology to refractory metals for producing fully dense, structurally sound deposits, several problems have become evident. 1. Control of porosity in DLF-deposited refractory metal is difficult because of gases, apparently present in commercially purchased refractory metal powder starting materials. 2. The radiant heat from the molten pool during deposition melts the DLF powder feed nozzle. 3. The high reflectivity of molten refractory metals, at the Nd-YAG laser wavelength (1.06microm), produces damaging back reflections to the optical train and fiber optic delivery system that can terminate DLF processing. 4. The current limits on the maximum available laser power to prevent back reflection damage limit the parameter range available for densification of refractory metals. The work to date concentrated on niobium, W-25Re, and spherodized tungsten. Niobium samples, made from hydride-dehydride powder, had minimal gas porosity and the deposition parameters were optimized; however, test plates were not made at this time. W-25Re samples, containing sodium and potassium from a precipitation process, were made and porosity was a problem for all samples although minimized with some process parameters. Deposits made from potassium reduced tungsten that was plasma spherodized were made with minimized porosity. Results of this work indicate that further gas analysis of starting powders and de-gassing of starting powders and/or gas removal during deposition of refractory metals is required

  7. Compound odontoma

    Directory of Open Access Journals (Sweden)

    Monica Yadav

    2012-01-01

    Full Text Available Odontomas have been extensively reported in the dental literature, and the term refers to tumors of odontogenic origin. Though the exact etiology is still unknown, the postulated causes include: local trauma, infection, inheritance and genetic mutation. The majority of the lesions are asymptomatic; however, may be accompanied with pain and swelling as secondary complaints in some cases. Here, we report a case of a compound odontome in a 14 year old patient.

  8. Selective adsorption of refractory sulfur species on active carbons and carbon based CoMo catalyst.

    Science.gov (United States)

    Farag, Hamdy

    2007-03-01

    Adsorption technique could be a reliable alternative in removing to a certain remarkable extent the sulfur species from the feedstock of petroleum oil. The performance of various carbons on adsorption of model sulfur compounds in a simulated feed solution and the sulfur containing compounds in the real gas oil was evaluated. The adsorption experiments have been carried out in a batch scale at ambient temperature and under the atmospheric pressure. In general, the most refractory sulfur compounds in the hydrotreatment reactions were selectively removed and adsorbed. It was found that the adsorbents affinities to dibenzothiophene and 4,6-dimethyldibenzothiophene were much more favored and pronounced than the aromatic matrices like fluorene, 1-methylnaphthalene and 9-methylanthracene. Among the sulfur species, 4,6-dimethyldibenzothiophene was the highest to be removed in terms of both selectivity and capacity over all the present adsorbents. The studied adsorbents showed significant capacities for the polyaromatic thiophenes. The electronic characteristics seem to play a certain role in such behavior. Regeneration of the used adsorbent was successfully attained either by washing it with toluene or by the release of the adsorbates through heat treatment. A suggested adsorptive removal process of sulfur compounds from petroleum distillate over carbon supported CoMo catalyst was discussed.

  9. A 197Au and 57Fe Moessbauer study of the roasting of refractory gold ores

    International Nuclear Information System (INIS)

    Wagner, F.E.; Marion, P.

    1989-01-01

    The transformation of chemically bound gold into metallic gold during industrial scale roasting of an arsenical gold ore concentrate from the Fairview Mine, Eastern Transvaal, has been studied quantitatively by 197 Au Moessbauer spectroscopy. The iron compounds in the concentrate, mainly FeAsS and FeS 2 , and their transformations during roasting have been studied by 57 Fe Moessbauer spectroscopy. The bound gold is found to convert into the metal in parallel to the decomposition of FeAsS and the increase in cyanide leachability. This shows that the refractory character of the ore is caused by the chemical bonding of the gold rather than by the physical inclusion of small, discrete metallic particles in the matrix of FeAsS or FeS 2 . The ratio of the f-factors of gold bound in the FeAsS component of a refractory ore and of metallic gold was determined to be f(Au:FeAsS)/f(Au)=1.48 ± 0.09. (orig.)

  10. Surgical disconnection of patent paraumbilical vein in refractory hepatic encephalopathy.

    Science.gov (United States)

    Ishikawa, Yoshinori; Yoshida, Hiroshi; Mamada, Yasuhiro; Taniai, Nobuhiko; Bando, Koichi; Mizuguchi, Yoshiaki; Kakinuma, Daisuke; Kanda, Tomohiro; Akimaru, Koho; Tajiri, Takashi

    2008-06-01

    Refractory hepatic encephalopathy (HE) frequently develops in patients with cirrhosis and portal-systemic shunt. Recently, patients with refractory HE associated with portal-systemic shunt have been treated with interventional radiology. We describe a promising new treatment for portal-systemic shunt, ligation of the patent paraumbilical vein (PUV) after partial splenic embolization, in patients with refractory HE. Four patients with cirrhosis (3 women and 1 man; mean age, 56 years) and refractory HE due to a patent PUV were studied. Patency of the PUV had recurred in 1 patient after primary occlusion by interventional radiological procedures. The Child-Pugh class was B in 2 patients and C in 2. Before the present treatment, all patients had been hospitalized at least 3 times because of recurrent HE. Partial splenic embolization was performed in all patients to decrease portal venous pressure before surgery. Surgical ligation of the patent PUV was performed under epidural anesthesia. The patent PUV was carefully skeletonized and doubly ligated. Esophageal varices were evaluated with upper gastrointestinal endoscopy before and after surgery. The mean follow-up duration was 15.8 months. After ligation, there were no clinically significant complications. Esophageal varices were unchanged. The serum ammonia level was higher before surgery (162.3 +/- 56.4 mug/dL, mean +/- SD) than after surgery (41.8 +/- 20.2 mug/dL; p=0.0299). No patient had symptoms of HE. Ligation of the patent PUV is an effective treatment for patients with refractory HE.

  11. Treatment of Refractory Idiopathic Supraorbital Neuralgia Using Percutaneous Pulsed Radiofrequency.

    Science.gov (United States)

    Luo, Fang; Lu, Jingjing; Ji, Nan

    2018-02-26

    No ideal therapeutic method currently exists for refractory idiopathic supraorbital neuralgia patients who do not respond to conservative therapy, including medications and nerve blocks. Pulsed radiofrequency is a neuromodulation technique that does not produce sequelae of nerve damage after treatment. However, the efficacy of percutaneous pulsed radiofrequency for the treatment of refractory idiopathic supraorbital neuralgia is still not clear. The purpose of our study was to evaluate the efficacy and safety of pulsed radiofrequency treatment of the supraorbital nerve for refractory supraorbital neuralgia patients. We prospectively investigated the long-term effects of ultrasound-guided percutaneous pulsed radiofrequency in the treatment of 22 refractory idiopathic supraorbital neuralgia patients. A reduction in the verbal pain numeric rating scale score of more than 50% was used as the standard of effectiveness. The effectiveness rates at different time points within 2 years were calculated. After a single pulsed radiofrequency treatment, the effectiveness rate at 1 and 3 months was 77%, and the rates at 6 months, 1 year, and 2 years were 73%, 64%, and 50%, respectively. Except for a small portion of patients (23%) who experienced mild upper eyelid ecchymosis that gradually disappeared after approximately 2 weeks, no obvious complications were observed. In conclusion, the results of our study demonstrate that for patients with refractory idiopathic supraorbital neuralgia, percutaneous pulsed radiofrequency may be an effective and safe treatment choice. © 2018 World Institute of Pain.

  12. Resistant and Refractory Hypertension: Antihypertensive Treatment Resistance vs Treatment Failure

    Science.gov (United States)

    Siddiqui, Mohammed; Dudenbostel, Tanja; Calhoun, David A.

    2017-01-01

    Resistant or difficult to treat hypertension is defined as high blood pressure that remains uncontrolled with 3 or more different antihypertensive medications, including a diuretic. Recent definitions also include controlled blood pressure with use of 4 or more medications as also being resistant to treatment. Recently, refractory hypertension, an extreme phenotype of antihypertensive treatment failure has been defined as hypertension uncontrolled with use of 5 or more antihypertensive agents, including a long-acting thiazide diuretic and a mineralocorticoid receptor antagonist. Patients with resistant vs refractory hypertension share similar characteristics and comorbidities, including obesity, African American race, female sex, diabetes, coronary heart disease, chronic kidney disease, and obstructive sleep apnea. Patients with refractory vs resistant hypertension tend to be younger and are more likely to have been diagnosed with congestive heart failure. Refractory hypertension might also differ from resistant hypertension in terms of underlying cause. Preliminary evidence suggests that refractory hypertension is more likely to be neurogenic in etiology (ie, heightened sympathetic tone), vs a volume-dependent hypertension that is more characteristic of resistant hypertension in general. PMID:26514749

  13. Development of alumino-silicate refractories in Ghana

    International Nuclear Information System (INIS)

    Kisiedu, A. K.; Tetteh, D.M.B.; Obiri, H. A.; Brenya, E. F.; Ayensu, A.

    2008-01-01

    Alumino-silicate (bauxite), andalusite, kaolin and clay were investigated for suitability in production of alumina, mullite and fireclay brick refractories. The raw materials were characterized by X-ray diffraction, differential thermal and silicate analyses. The x-ray diffraction analysis of alumina and mullite refractories fired at 1450 0 C, and fireclay bricks fired at 1350 0 C, indicated presence of corundum and alpha-alumina crystals. The values of thermal (fired) shrinkage, crushing, strength, porosity, water absorption and bulk density determined were 31.1%, 2.3 x 10 3 kg/m 3 , 4.86 x 10 6 N/m 2 and 13.2 % for mullite; 30.2%, 2.4 x 10 3 kg/m 3 , 3.20 x 10 6 N/m 2 and W = 12.8 % for alumina; and 25.2 %, 2.1 x 10 3 kg/m 3 , 2.61 x 10 6 N/m 2 and W = 11.8% for fireclay, respectively. Bauxite, andalusite and special kaolin were identified as potential raw materials for developing alumina and mullite refractories for construction of high temperature kilns and furnaces operating at 1350 0 C. The clay and kaolin minerals could be used to produce fireclay refractories for construction of incinerators operating at maximum temperatures of about 1000 0 C. The performance of the refractories was demonstrated by producing bricks to construct kilns and incinerators for the ceramic industry and hospitals. (au)

  14. REFRACTORY CEPHALEA AND RHINITIS FOLLOWING DENTAL IMPLANT

    Directory of Open Access Journals (Sweden)

    ENRIQUE COSCARÓN-BLANCO

    2018-05-01

    Full Text Available INTRODUCTION: Dental implants are prosthetic devices that are inserted into the thickness of the bone of the maxilla for osseointegration using a screw system. They are increasingly used for both functional and aesthetic reasons. As in any medical or surgical procedure, there are some typical risks and possible sequelae that must be explained and prevented. However, sometimes not-associated-with-implantation rare complications that can cause great morbidity and decrease in the quality of life of the implant recipient can occur. A case of an unusual complication is reported,MATERIAL AND METHODS: A 65-year-old woman presented with a permanent mainly right-sided bilateral nasal obstruction with frequent watery rhinorrhea and headache with retro-orbital and infraorbital irradiation refractory to broad-spectrum antibiotic treatment, corticosteroids and analgesics that she associated with a dental implant two weeks before. . Sinusitis or implant-related complication were ruled out by the dentist and her Primary Care Physician, and therefore she was referred to otorhinolaryngological assessment after radiological study with maxillary sinuses free of disease. The physical examination demostrated inferior obstructive hypertrophic turbinates from the anterior third and thick clear rhinorrhea. After topic tetracaine with adrenaline ,retraction of the turbinates revealed a screw that after breaking the floor of the right nostril entered the thickness of the inferior turbinate. In the left nostril, soil procidence is identified with turbinal contact. An orthopantomography demonstrated the findings described above, highlighting also how the implant was inserted into the skeleton of the inferior turbinate. The sympthoms resolved after removal of the implant. Topical oxymetazoline and corticosteroids provided little relief meanwhile. DISCUSSION AND CONCLUSIONS: The functional objectives sought with dental implants can be compromised by complications such as the

  15. Prevalence and Clinical Characteristics of Refractory Hypertension.

    Science.gov (United States)

    Armario, Pedro; Calhoun, David A; Oliveras, Anna; Blanch, Pedro; Vinyoles, Ernest; Banegas, Jose R; Gorostidi, Manuel; Segura, Julián; Ruilope, Luis M; Dudenbostel, Tanja; de la Sierra, Alejandro

    2017-12-07

    We aimed to estimate the prevalence of refractory hypertension (RfH) and to determine the clinical differences between these patients and resistant hypertensives (RH). Secondly, we assessed the prevalence of white-coat RfH and clinical differences between true- and white-coat RfH patients. The present analysis was conducted on the Spanish Ambulatory Blood Pressure Monitoring Registry database containing 70 997 treated hypertensive patients. RH and RfH were defined by the presence of elevated office blood pressure (≥140 and/or 90 mm Hg) in patients treated with at least 3 (RH) and 5 (RfH) antihypertensive drugs. White-coat RfH was defined by RfH with normal (<130/80 mm Hg) 24-hour blood pressure. A total of 11.972 (16.9%) patients fulfilled the standard criteria of RH, and 955 (1.4%) were considered as having RfH. Compared with RH patients, those with RfH were younger, more frequently male, and after adjusting for age and sex, had increased prevalence of target organ damage, and previous cardiovascular disease. The prevalence of white coat RfH was lower than white-coat RH (26.7% versus 37.1%, P <0.001). White-coat RfH, in comparison with those with true RfH, showed a lower prevalence of both left ventricular hypertrophy (22% versus 29.7%; P =0.018) and microalbuminuria (28.3% versus 42.9%; P =0.047). The prevalence of RfH was low and these patients had a greater cardiovascular risk profile compared with RH. One out of 4 patients with RfH have normal 24-hour blood pressure and less target organ damage, thus indicating the important role of ambulatory blood pressure monitoring in guiding antihypertensive therapy in difficult-to-treat patients. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

  16. Palbociclib in Treating Patients With Relapsed or Refractory Rb Positive Advanced Solid Tumors, Non-Hodgkin Lymphoma, or Histiocytic Disorders With Activating Alterations in Cell Cycle Genes (A Pediatric MATCH Treatment Trial)

    Science.gov (United States)

    2018-05-15

    Advanced Malignant Solid Neoplasm; RB1 Positive; Recurrent Childhood Ependymoma; Recurrent Ewing Sarcoma; Recurrent Glioma; Recurrent Hepatoblastoma; Recurrent Kidney Wilms Tumor; Recurrent Langerhans Cell Histiocytosis; Recurrent Malignant Germ Cell Tumor; Recurrent Malignant Glioma; Recurrent Medulloblastoma; Recurrent Neuroblastoma; Recurrent Non-Hodgkin Lymphoma; Recurrent Osteosarcoma; Recurrent Peripheral Primitive Neuroectodermal Tumor; Recurrent Rhabdoid Tumor; Recurrent Rhabdomyosarcoma; Recurrent Soft Tissue Sarcoma; Refractory Ependymoma; Refractory Ewing Sarcoma; Refractory Glioma; Refractory Hepatoblastoma; Refractory Langerhans Cell Histiocytosis; Refractory Malignant Germ Cell Tumor; Refractory Malignant Glioma; Refractory Medulloblastoma; Refractory Neuroblastoma; Refractory Non-Hodgkin Lymphoma; Refractory Osteosarcoma; Refractory Peripheral Primitive Neuroectodermal Tumor; Refractory Rhabdoid Tumor; Refractory Rhabdomyosarcoma; Refractory Soft Tissue Sarcoma

  17. Neuroimaging in refractory epilepsy. Current practice and evolving trends

    International Nuclear Information System (INIS)

    Ramli, N.; Rahmat, K.; Lim, K.S.; Tan, C.T.

    2015-01-01

    Highlights: • Neuroimaging is imperative in diagnostic work up and therapeutic assessment of refractory epilepsy. • Identification of epileptogenic zone on EEG, MRI and functional imaging improves the success of surgery. • High performance MRI greatly enhanced metabolic information and elucidate brain functions. • Optimisation of epilepsy protocols in structural and functional MRI are presented in this article. - Abstract: Identification of the epileptogenic zone is of paramount importance in refractory epilepsy as the success of surgical treatment depends on complete resection of the epileptogenic zone. Imaging plays an important role in the locating and defining anatomic epileptogenic abnormalities in patients with medically refractory epilepsy. The aim of this article is to present an overview of the current MRI sequences used in epilepsy imaging with special emphasis of lesion seen in our practices. Optimisation of epilepsy imaging protocols are addressed and current trends in functional MRI sequences including MR spectroscopy, diffusion tensor imaging and fusion MR with PET and SPECT are discussed

  18. Neuroimaging in refractory epilepsy. Current practice and evolving trends

    Energy Technology Data Exchange (ETDEWEB)

    Ramli, N. [Department of Biomedical Imaging, University Malaya Research Imaging Centre (Malaysia); Rahmat, K., E-mail: katt_xr2000@yahoo.com [Department of Biomedical Imaging, University Malaya Research Imaging Centre (Malaysia); Lim, K.S.; Tan, C.T. [Neurology Unit, Department of Medicine, University Malaya, Kuala Lumpur (Malaysia)

    2015-09-15

    Highlights: • Neuroimaging is imperative in diagnostic work up and therapeutic assessment of refractory epilepsy. • Identification of epileptogenic zone on EEG, MRI and functional imaging improves the success of surgery. • High performance MRI greatly enhanced metabolic information and elucidate brain functions. • Optimisation of epilepsy protocols in structural and functional MRI are presented in this article. - Abstract: Identification of the epileptogenic zone is of paramount importance in refractory epilepsy as the success of surgical treatment depends on complete resection of the epileptogenic zone. Imaging plays an important role in the locating and defining anatomic epileptogenic abnormalities in patients with medically refractory epilepsy. The aim of this article is to present an overview of the current MRI sequences used in epilepsy imaging with special emphasis of lesion seen in our practices. Optimisation of epilepsy imaging protocols are addressed and current trends in functional MRI sequences including MR spectroscopy, diffusion tensor imaging and fusion MR with PET and SPECT are discussed.

  19. Beta-blockers in cirrhosis and refractory ascites

    DEFF Research Database (Denmark)

    Kimer, Nina; Feineis, Martin; Møller, Søren

    2015-01-01

    OBJECTIVE: It is currently discussed if beta-blockers exert harmful effects and increase mortality in patients with cirrhosis and refractory ascites. In this study, we provide an overview of the available literature in this field in combination with a retrospective analysis of 61 patients...... trials (9 trials on propranolol, 1 case-control study and 4 retrospective analyses) were identified. One trial suggested an increased mortality in patients treated with beta-blockers and refractory ascites. The results of the remaining trials were inconclusive. No increase in mortality among beta-blocker......-treated patients was found in the present retrospective analysis. CONCLUSIONS: Treatment with beta-blockers may increase mortality in patients with cirrhosis and refractory ascites. However, the current evidence is sparse and high-quality studies are warranted to clarify the matter....

  20. Depression in patients with refractory temporal lobe epilepsy

    Directory of Open Access Journals (Sweden)

    Eleonora Borges Gonçalves

    2011-10-01

    Full Text Available OBJECTIVE: To evaluate the comorbidity of depressive disorders in patients with refractory temporal lobe epilepsy (TLE. METHOD: We evaluated 25 consecutive patients with refractory TLE (16 women and 9 men, using semi-structured psychiatric interviews, according to the International Classification of Diseases (ICD-10, and the Beck Depression Inventory. RESULTS: Seventeen of 25 patients (68% had depressive disorder: 6 with dysthymia, three with major depressive episodes and 8 with recurrent depressive disorders. Two (8% were diagnosed with mixed anxiety and depression. Only 5 of 17 patients (29.4% were previously diagnosed with depressive disorder and received prior antidepressant treatment. Duration of epilepsy was significantly higher in patients with depressive disorder (p=0.016, but there was no relationship between depression and seizure frequency. CONCLUSION: This study confirmed that depressive disorders are common and underdiagnosed in patients with TLE refractory to AEDs. Patients with longer duration of epilepsy are at higher risk of having depression.

  1. Felbamate in an adult population with severe refractory epilepsy.

    LENUS (Irish Health Repository)

    Kearney, H

    2011-04-05

    Felbamate (FBM) is efficacious in treating patients with refractory epilepsy but was withdrawn due to cases of aplastic anaemia, hepatic failure and five reported deaths. FBM is currently used in specialist centres and is only being used in one Irish centre to date. This papers aim is to review the efficacy and safety experience of FBM in Irish adult patients with refractory epilepsy. A retrospective chart review was done on patients\\' medical records. Patients were subdivided into responders and non responders based on change in seizure frequency and side effects were recorded for all. Of the 13 patients on FBM nine patients responded to FBM, four patients did not. FBM is a safe and efficacious alternative in an Irish adult population with refractory epilepsy. However close monitoring is still required given the potential fatal side effects that are possible with this anticonvulsant.

  2. Alkali metal-refractory metal biphase electrode for AMTEC

    Science.gov (United States)

    Williams, Roger M. (Inventor); Bankston, Clyde P. (Inventor); Cole, Terry (Inventor); Khanna, Satish K. (Inventor); Jeffries-Nakamura, Barbara (Inventor); Wheeler, Bob L. (Inventor)

    1989-01-01

    An electrode having increased output with slower degradation is formed of a film applied to a beta-alumina solid electrolyte (BASE). The film comprises a refractory first metal M.sup.1 such as a platinum group metal, suitably platinum or rhodium, capable of forming a liquid or a strong surface adsorption phase with sodium at the operating temperature of an alkali metal thermoelectric converter (AMTEC) and a second refractory metal insoluble in sodium or the NaM.sup.1 liquid phase such as a Group IVB, VB or VIB metal, suitably tungsten, molybdenum, tantalum or niobium. The liquid phase or surface film provides fast transport through the electrode while the insoluble refractory metal provides a structural matrix for the electrode during operation. A trilayer structure that is stable and not subject to deadhesion comprises a first, thin layer of tungsten, an intermediate co-deposited layer of tungsten-platinum and a thin surface layer of platinum.

  3. High Throughput Drug Sensitivity Assay and Genomics- Guided Treatment of Patients With Relapsed or Refractory Acute Leukemia

    Science.gov (United States)

    2018-02-28

    Acute Leukemia of Ambiguous Lineage; Recurrent Adult Acute Lymphoblastic Leukemia; Recurrent Adult Acute Myeloid Leukemia; Recurrent Childhood Acute Lymphoblastic Leukemia; Recurrent Childhood Acute Myeloid Leukemia; Refractory Acute Myeloid Leukemia; Refractory Adult Acute Lymphoblastic Leukemia; Refractory Childhood Acute Lymphoblastic Leukemia

  4. Research on refractory, reactive and rare metals in BARC

    International Nuclear Information System (INIS)

    Banerjee, Srikumar

    2016-01-01

    Material processing activities were given a due thrust in Atomic Energy Programme right from the beginning. Initially research was primarily focused on metals such as uranium, thorium and zirconium which are of direct relevance to the nuclear programme. Having attained the success in processing these metals from the indigenous resources, the scope and range of material processing activities were enhanced and broadened considerably in the subsequent years. Having mastered the Kroll process for zirconium extraction, the same process was adopted in laboratory and in pilot scales for the extraction of titanium. With the experience gained in processing and handling reactive metals, flow sheet development of group V-A and VI-A metals was taken up. This presentation will summarise how different unit operations for the processing of Mo, V, Ta, W and Nb were developed and optimized. These elements have the same crystal structure (bcc), high melting points, similar chemical interactions with other elements, generally exhibiting high ductile to brittle transition temperatures and have similar alloying behavior. The general approach of processing and purification of these metals for improving the strength and ductability are discussed. The principles for the development of protective coatings on these reactive metals are also covered. The manufacturing process for the multi-filamentary superconducting cable made out of Niobium is described to illustrate the success story of the development of entire chain of operations leading to the final deployable product meeting the exacting specifications. The challenges faced in the development of beryllium, another reactive and toxic metal is briefly discussed. In order to exploit the sizeable resources of rare earth elements in India, research on processing of rare earths was initiated quite early. In the recent past there have been efforts on separation of individual rare earth elements and in preparing rare earth compounds and inter

  5. Ketogenic diet treatment for pediatric super-refractory status epilepticus.

    Science.gov (United States)

    Appavu, Brian; Vanatta, Lisa; Condie, John; Kerrigan, John F; Jarrar, Randa

    2016-10-01

    We aimed to study whether ketogenic diet (KD) therapy leads to resolution of super-refractory status epilepticus in pediatric patients without significant harm. A retrospective review was performed at Phoenix Children's Hospital on patients with super-refractory status epilepticus undergoing ketogenic diet therapy from 2011 to 2015. Ten children with super-refractory status epilepticus, ages 2-16 years, were identified. 4/10 patients had immune mediated encephalitis, including Rasmussen encephalitis, anti-N-methyl-d-aspartate receptor encephalitis, and post-infectious mycoplasma encephalitis. Other etiologies included Lennox Gastaut Syndrome, non-ketotic hyperglycinemia, PCDH19 and GABRG2 genetic epilepsy, New Onset Refractory Status Epilepticus, and Febrile Infection-Related Epilepsy Syndrome. 4/10 patients' EEG features suggested focal with status epilepticus, and 6/10 suggested generalized with status epilepticus. Median hospital length was 61days and median ICU length was 27days. The median number of antiepileptic medications prior to diet initiation was 3.0 drugs, and the median after ketogenic diet treatment was 3.5 drugs. Median duration of status epilepticus prior to KD was 18days. 9/10 patients had resolution of super-refractory status epilepticus in a median of 7days after diet initiation. 8/9 patients were weaned off anesthesia within 15days of diet initiation, and within 1day of achieving ketonuria. 1/10 patients experienced side effects on the diet requiring supplementation. Most patients achieved resolution of status epilepticus on KD therapy, suggesting it could be an effective therapy that can be utilized early in the treatment of children with super refractory status epilepticus. Copyright © 2016. Published by Elsevier Ltd.

  6. Refractory experience in circulating fluidized bed combustors, Task 7

    Energy Technology Data Exchange (ETDEWEB)

    Vincent, R.Q.

    1989-11-01

    This report describes the results of an investigation into the status of the design and selection of refractory materials for coal-fueled circulating fluidized-bed combustors. The survey concentrated on operating units in the United States manufactured by six different boiler vendors: Babcock and Wilcox, Combustion Engineering, Foster Wheeler, Keeler Dorr-Oliver, Pyropower, and Riley Stoker. Information was obtained from the boiler vendors, refractory suppliers and installers, and the owners/operators of over forty units. This work is in support of DOE's Clean Coal Technology program, which includes circulating fluidized-bed technology as one of the selected concepts being evaluated.

  7. Evaluation of refractory materials for a nuclear waste incinerator

    International Nuclear Information System (INIS)

    Grotzky, V.K.; Kneale, P.A.; Teter, A.R.

    1980-01-01

    An experiment to find a suitable refractory lining for a nuclear waste incinerator has been completed. Eleven brick and six castable products were analyzed by optical and scanning microscopy. All the materials were fashioned into cup shapes and subjected to temperatures ranging from 800 to 1200 0 C for as long as six weeks. Some of the cups were charged weekly with pellets made from ash materials that would contact an incinerator liner. Refractory products containing a high percentage of aluminum oxide had the greatest resistance to cracking and slag buildup. 35 figures

  8. MICROWAVE MEASUREMENT OF REFRACTORY MATERIALS AT HIGH-TEMPERATURE

    International Nuclear Information System (INIS)

    Kharkovsky, S.; Zoughi, R.; Smith, J.; Davis, B.; Limmer, R.

    2009-01-01

    Knowledge of the electrical behavior of refractory materials may enable the development and optimization of microwave nondestructive techniques to detect and evaluate changes in their physical properties while the materials are in service. This paper presents the results of a limited and preliminary investigation in which two refractory materials (dense chrome and dense zircon) were subjected to increasing temperature in a furnace and in which a frequency-modulated continuous-wave radar operating in the frequency range of 8-18 GHz radar was used to evaluate their attenuation properties.

  9. Microwave Measurement of Refractory Materials at High-Temperature

    Science.gov (United States)

    Kharkovsky, S.; Zoughi, R.; Smith, J.; Davis, B.; Limmer, R.

    2009-03-01

    Knowledge of the electrical behavior of refractory materials may enable the development and optimization of microwave nondestructive techniques to detect and evaluate changes in their physical properties while the materials are in service. This paper presents the results of a limited and preliminary investigation in which two refractory materials (dense chrome and dense zircon) were subjected to increasing temperature in a furnace and in which a frequency-modulated continuous-wave radar operating in the frequency range of 8-18 GHz radar was used to evaluate their attenuation properties.

  10. Refractory metal component technology for in-core sensor design

    International Nuclear Information System (INIS)

    Cannon, C.P.

    1986-02-01

    Within recent years, an increasing concern over reactor safety has prompted tests that characterize reactor core environments during transient conditions. Such tests include the Loss-of-Fluid-Tests (Idaho National Engineering Lab (INEL)), Severe Fuel Damage Tests (INEL), Core Debris Rubble Tests (Sandia National Laboratories (SNL)), and similar tests performed by foreign nations. The in-core sensors for these tests require refractory metal components to be compatible with electrical insulator materials as well as materials comprising highly corrosive service mediums. This paper presents the refractory metal technology utilized to provide basic sensor designs in the above mentioned reactor tests

  11. Pembrolizumab in Treating Younger Patients With Recurrent, Progressive, or Refractory High-Grade Gliomas, Diffuse Intrinsic Pontine Gliomas, Hypermutated Brain Tumors, Ependymoma or Medulloblastoma

    Science.gov (United States)

    2018-06-18

    Constitutional Mismatch Repair Deficiency Syndrome; Lynch Syndrome; Malignant Glioma; Progressive Ependymoma; Progressive Medulloblastoma; Recurrent Brain Neoplasm; Recurrent Childhood Ependymoma; Recurrent Diffuse Intrinsic Pontine Glioma; Recurrent Medulloblastoma; Refractory Brain Neoplasm; Refractory Diffuse Intrinsic Pontine Glioma; Refractory Ependymoma; Refractory Medulloblastoma

  12. Efficacy and Safety of Rituximab in Children with Refractory Nephrotic Syndrome; A Multicenter Clinical Trial

    Directory of Open Access Journals (Sweden)

    Yo Han Ahn

    2014-06-01

    Conclusions: In this interim analysis of clinical trial to evaluate the efficacy and safety of RTX in children with refractory NS, RTX treatment for refractory NS was safe and effective, especially in patients with DNS.

  13. Long-term effects of electrical neurostimulation in patients with unstable angina : Refractory to conventional therapies

    NARCIS (Netherlands)

    de Vries, Jessica; DeJongste, Mike J. L.; Zijlstra, Felix; Staal, Michiel

    2007-01-01

    Background. Patients with unstable angina pectoris may become refractory to conventional therapies. Electrical neurostimulation with transcutaneous electrical stimulation and/or spinal cord stimulation has been shown to be effective for patients with refractory unstable angina pectoris in hospital

  14. Long-term evaluation of treatment of chronic, therapeutically refractory tinnitus by neurostimulation

    NARCIS (Netherlands)

    Staal, M. J.; Holm, A. F.; Mooij, J. J. A.; Albers, F. W. J.; Bartels, H.

    2007-01-01

    Objective: Long-term evaluation of treatment of chronic, therapeutically refractory tinnitus by means of chronic electrical stimulation of the vestibulocochlear nerve. Patients: Inclusion criteria were severe, chronic, therapeutically refractory, unilateral tinnitus and severe hearing loss at the

  15. Iron-Refractory Iron Deficiency Anemia

    Directory of Open Access Journals (Sweden)

    Ebru Yılmaz Keskin

    2015-03-01

    Full Text Available Demir, oksijenin taşınması, DNA sentezi ve hücre çoğalması gibi çeşitli biyolojik reaksiyonlar için vazgeçilmez olduğundan, yaşam için zorunludur. Demir metabolizması ve bu elementin düzenlenmesiyle ilgili bilgilerimiz, son yıllarda belirgin şekilde değişmiştir. Demir metabolizması ile ilgili yeni bozukluklar tanımlanmış ve demirin başka bozuklukların kofaktörü olduğu anlaşılmaya başlamıştır. Hemokromatozis ve demir tedavisine dirençli demir eksikliği anemisi (IRIDA; “iron-refractory iron deficiency anemia” gibi genetik durumlar üzerinde yapılan çalışmalar, vücuttaki demir dengesini kontrol eden moleküler mekanizmalar ile ilgili önemli ipuçları sunmuştur. Bu ilerlemeler, gelecekte, hem genetik hem de kazanılmış demir bozukluklarının daha etkili şekilde tedavi edilmesi amacıyla kullanılabilir. IRIDA, demir eksikliği ile giden durumlarda, hepsidin üretimini baskılayan matriptaz-2’yi kodlayan TMPRSS6 genindeki mutasyonlardan kaynaklanmaktadır. Hastalığın tipik özellikleri, hipokrom, mikrositer anemi, çok düşük ortalama eritrosit hacmi, oral demir tedavisine yanıtsızlık (veya yetersiz yanıt ve parenteral demire kısmi yanıttır. Klasik demir eksikliği anemisinin aksine, serum ferritin değeri genellikle hafif düşük ya da normal aralıkta; serum ve idrar hepsidin değerleri ise, aneminin derecesi ile orantısız şekilde yüksek bulunur. Şimdiye kadar literatürde bildirilmiş olguların sayısı 100’ü geçmediği halde, IRIDA’nın, “atipik” mikrositik anemilerin en sık nedeni olduğu düşünülmektedir. Bu derlemenin amacı, IRIDA hakkındaki güncel bilgileri araştırıcılar ile paylaşmak ve bu alandaki farkındalıklarını arttırmaktır.

  16. Compound odontoma

    Directory of Open Access Journals (Sweden)

    José Marcelo Vargas Pinto

    2008-01-01

    Full Text Available Odontomas are the most common types of odontogenic tumors, as they are considered more as a developmental anomaly (hamartoma than as a true neoplasia. The aim of the present study is to describe a clinical case of compound odontoma, analyzing its most commonsigns, its region of location, the decade of life and patient’s gender, disorders that may occur as well as the treatment proposed. In order to attain this objective, the method was description of the present clinical case and bibliographic revision, arriving at the result that the treatment for this type of lesion invariably is surgical removal (enucleation and curettage and the prognosis is excellent. The surgical result was followed up in the post-operative period by radiographic exam, and it was possible to conclude that there was complete cicatrization and tissue repair.

  17. Magnesium compounds

    Science.gov (United States)

    Kramer, D.A.

    2012-01-01

    Seawater and natural brines accounted for about 57 percent of magnesium compounds produced in the United States in 2011. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties LLC from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia LLC in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash Wendover LLC and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma Inc. in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its brine operation in Michigan.

  18. Selective oxidation of refractory sulfur compounds for the production of low sulfur transportation fuel

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwang-Eun; Kim, Tae-Wan; Kim, Joo-Wan; Chae, Ho-Jeong; Kim, Chul-Ung; Jeong, Soon-Yong [Korea Research Institute of Chemical Technology, Daejeon (Korea, Republic of); Park, Young-Kwon [University of Seoul, Seoul (Korea, Republic of)

    2013-03-15

    The current technologies for achieving low sulfur in diesel fuel are based on hydrotreating, which requires high temperature, high pressure and excessive supply of hydrogen. Oxidative desulfurization (ODS) is considered one of the promising new methods for super deep desulfurization, which could be carried out under very mild conditions (atmospheric pressure, <100 .deg.. C) without consumption of hydrogen. In this paper, development status of ODS process by major licensors are described as well as general concepts of ODS reaction. In addition, the ODS process has been categorized into single phasic and biphasic system according to the oxidants involved. Recent trends in both systems are reviewed in detail and future work is also proposed.

  19. Selective oxidation of refractory sulfur compounds for the production of low sulfur transportation fuel

    International Nuclear Information System (INIS)

    Jeong, Kwang-Eun; Kim, Tae-Wan; Kim, Joo-Wan; Chae, Ho-Jeong; Kim, Chul-Ung; Jeong, Soon-Yong; Park, Young-Kwon

    2013-01-01

    The current technologies for achieving low sulfur in diesel fuel are based on hydrotreating, which requires high temperature, high pressure and excessive supply of hydrogen. Oxidative desulfurization (ODS) is considered one of the promising new methods for super deep desulfurization, which could be carried out under very mild conditions (atmospheric pressure, <100 .deg.. C) without consumption of hydrogen. In this paper, development status of ODS process by major licensors are described as well as general concepts of ODS reaction. In addition, the ODS process has been categorized into single phasic and biphasic system according to the oxidants involved. Recent trends in both systems are reviewed in detail and future work is also proposed

  20. X-ray photoelectron spectroscopy study of radiofrequency-sputtered refractory compound steel interfaces

    Science.gov (United States)

    Wheeler, D. R.; Brainard, W. A.

    1978-01-01

    Radiofrequency sputtering was used to deposit Mo2C, Mo2B5, and MoSi2 coatings on 440C steel substrates. Both sputter etched and preoxidized substrates were used, and the films were deposited with and without a substrate bias of -300 V. The composition of the coatings was measured as a function of depth by X-ray photoelectron spectroscopy combined with argon ion etching. In the interfacial region there was evidence that bias produced a graded interface in Mo2B5 but not in Mo2C. Oxides of iron and of all film constituents except carbon were presented in all cases but the iron oxide concentration was higher and the layer thicker on the preoxidized substrates. The film and iron oxides were mixed in the MoSi2 and Mo2C films but layered in the Mo2B5 film. The presence of mixed oxides correlates with enhanced film adhesion.

  1. Characterization of ferric arsenate-sulfate compounds: Implications for arsenic control in refractory gold processing residues

    Czech Academy of Sciences Publication Activity Database

    Paktunc, D.; Majzlan, J.; Palatinus, Lukáš; Dutrizac, J.; Klementová, Mariana; Poirier, G.

    2013-01-01

    Roč. 98, č. 4 (2013), s. 554-565 ISSN 0003-004X Institutional support: RVO:68378271 Keywords : arsenic * ferric arsenate sulfate * autoclave residue * hydrometallurgy Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.059, year: 2013

  2. Research technique and experimental device for thermal conductivity measurements of refractory compounds

    International Nuclear Information System (INIS)

    Vishnevetskaya, I.A.; Petrov, V.A.

    1977-01-01

    Proposed is a new axial technique for determining thermal conductivity coefficient of solids at temperatures above 1000 deg C with the use of internal heating of specimens by passing electric current and with experimental determining the thermal flows on the lateral side of the working section of the specimen. This method is usable for investigating the thermal conductivity of materials whose surface radiation characteristics are unknown or unstable and for carrying out experiments not only in vacuum, but also in various atmospheres. The overall fiducial error of the results of the method is evaluated at 4-5 % within the range of temperatures between 1200 and 2300 K. A description of the experimental installation is given

  3. Testing of the melter lid refractory for the West Valley Demonstration Project (WVDP)

    International Nuclear Information System (INIS)

    Gupta, A.; Jain, V.; Mahoney, J.L.; Holman, T.M.

    1991-01-01

    Monofrax H and Mulfrax 202 refractory were tested for potential application as the melter lid refractory for the WVDP. Resistance to spalling and corrosion by the slurry and offgas salts were primary criteria for selection. Test specimens were subjected to thermal cycling between 450 and 1,100C for five weeks. Visual examination indicated some corrosion but no spalling. SEM/EDS analysis was performed to determine the glass/refractory interface corrosion mechanism. The refractory selection basis will be discussed

  4. Outcomes in Children Treated with Pentobarbital Infusion for Refractory and Super-Refractory Status Epilepticus.

    Science.gov (United States)

    Erklauer, Jennifer; Graf, Jeanine; McPherson, Mona; Anderson, Anne; Wilfong, Angus; Minard, Charles G; Loftis, Laura

    2018-03-26

    Functional neurologic outcome for children with refractory and super-refractory status epilepticus has not been well defined. Retrospective chart review including children age 0-17 years who received pentobarbital infusion from 2003 to 2016 for status epilepticus. Outcomes were defined in terms of mortality, need for new medical technology assistance at hospital discharge and functional neurologic outcome determined by pediatric cerebral performance category score (PCPC). Potential patient characteristics associated with functional neurologic outcome including age, sex, ethnicity, etiology of the status epilepticus, and duration of pentobarbital infusion were evaluated. Forty children met inclusion criteria. In-hospital mortality was 30% (12/40). Of survivors, 21% (6/28) returned to baseline PCPC while half (14/28) declined in function ≥ 2 PCPC categories at hospital discharge. 25% (7/28) of survivors required tracheostomy and 27% (7/26) required new gastrostomy. Seizures persisted at discharge for most patients with new onset status epilepticus while the majority of patients with known epilepsy returned to baseline seizure frequency. Etiology (p = 0.015), PCPC at admission (p = 0.0006), new tracheostomy (p = 0.012), and new gastrostomy tube (p = 0.012) were associated with increase in PCPC score ≥ 2 categories in univariable analysis. Duration of pentobarbital infusion (p = 0.005) and length of hospital stay (p = 0.056) were longer in patients who demonstrated significant decline in neurologic function. None of these variables maintained statistical significance when multiple logistic regression model adjusting for PCPC score at admission was applied. At long-term follow-up, 36% (8/22) of children demonstrated improvement in PCPC compared to discharge and 23% (5/22) showed deterioration including three additional deaths. Mortality in this population was high. The majority of children experienced some degree of disability at discharge. Despite

  5. Bone marrow immunophenotyping by flow cytometry in refractory cytopenia of childhood

    NARCIS (Netherlands)

    A.M. Aalbers (Anna Maartje); M.M. van den Heuvel-Eibrink (Marry); I. Baumann (Irith); M.N. Dworzak (Michael); H. Hasle (Henrik); F. Locatelli (Franco); B. de Moerloose (Barbara); M. Schmugge; E. Mejstříková (Ester); M. Nováková (Michaela); M. Zecca (Marco); C.M. Zwaan (Christian Michel); J.G. te Marvelde (Jeroen); A.W. Langerak (Anton); J.J.M. van Dongen (Jacques); R. Pieters (Rob); C.M. Niemeyer (Charlotte); V.H.J. van der Velden (Vincent)

    2015-01-01

    textabstractRefractory cytopenia of childhood is the most common type of childhood myelodysplastic syndrome. Because the majority of children with refractory cytopenia have a normal karyotype and a hypocellular bone marrow, differentiating refractory cytopenia from the immune-mediated bone marrow

  6. Clinical and etiological profile of refractory rickets from western India.

    Science.gov (United States)

    Joshi, Rajesh R; Patil, Shailesh; Rao, Sudha

    2013-07-01

    To present clinical and etiological profile of refractory rickets from Mumbai. Case records of 36 patients presenting over 2½ y with refractory rickets were evaluated with respect to clinical presentation, biochemical, radiological features and where needed, ophthalmological examination, ultrasonography and special tests on blood and urine. Twenty three (63 %) patients had renal tubular acidosis (RTA)-distal RTA in 20 and proximal RTA in 3 patients; 5 (14 %) had vitamin D dependent rickets (VDDR I in 2 and VDDR II in 3 patients), 4 (11 %) had chronic renal failure (CRF) and 2 each (6 %) had hypophosphatemic rickets and chronic liver disease as cause of refractory rickets. A significant proportion of patients with RTA and VDDR showed skeletal changes of rickets in the first 2 y of life, while those with hypophosphatemic rickets presented later. Patients with hypophosphatemic rickets had predominant involvement of lower limbs, normal blood calcium and PTH levels and phosphorus leak in urine. All patients with RTA presented with failure to thrive, polyuria and marked rickets; blood alkaline phosphatase levels being normal in almost 50 % patients. Three (75 %) patients with rickets due to CRF had GFR rickets inspite of taking high dose of vitamin D orally. Refractory rickets is a disorder of multiple etiologies; a good history and clinical examination supplemented with appropriate investigations helps to determine its cause.

  7. Anaesthesia for left thoracoscopic sympathectomy for refractory long ...

    African Journals Online (AJOL)

    ... mutations including life-threatening cardiac arrhythmias and sudden death. Left thoracoscopic sympathectomy is an effective treatment for patients who are refractory to medical therapy or who need frequent epicardial internal cardio defibrillator intervention. The authors report three cases, one adult and two children, who ...

  8. Productivity Costs in Patients with Refractory Chronic Rhinosinusitis

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L.; Schlosser, Rodney J.; Hwang, Peter H.; Mace, Jess C.; Soler, Zachary M.

    2014-01-01

    Objective Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Study Design Prospective, multi-institutional, observational cohort study. Methods The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US National Census and the 2013 US Department of Labor statistics. Results A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism was 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r=0.440; p=0.001). Conclusion Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. PMID:24619604

  9. [Nursing management of a refractory cardiac death donor].

    Science.gov (United States)

    Kaufmann, Marion

    2016-09-01

    The nursing management of a refractory circulatory death donor is a new procedure which forms an integral part of patient care. It comprises technical and organisational aspects, and requires a conceptual, ethical and deontological effort. Copyright © 2016. Published by Elsevier Masson SAS.

  10. Clinical outcomes of intravenous immunoglobulin therapy in refractory uveitis.

    Science.gov (United States)

    Garcia-Geremias, M; Carreño, E; Epps, S J; Lee, R W J; Dick, A D

    2015-04-01

    Intravenous immunoglobulin (IVIg) therapy has multiple mechanisms of immunomodulatory action. We wished therefore to assess its efficacy in a spectrum of patients with refractory uveitis. Retrospective review of clinical charts was conducted to document response to IVIg treatment in consecutive patients with treatment-refractory uveitis. Main outcome measures were control of intraocular inflammation, visual acuity, progression of the disease, and complications. Four (two male) patients, with a mean age at the beginning of the treatment of 47 years (range: 39-64), were included in the study. Indication for treatment was patients with active non-infectious uveitis refractory to steroids and immunomodulatory therapy. All patients received a course of 0.5 g/kg per day of IVIg for three consecutive days, repeating this course at a mean of 11 week (range: 2-39 weeks) intervals when indicated clinically. The median duration of the IVIg therapy was 7 months (range: 3-14 months). In three patients treatment resulted in stabilisation and prevention of progression of the disease, and additionally in two patients it facilitated a decrease in prednisolone dose. Treatment failed to induce long-term remission in one patient with recurrence of macular oedema. IVIg was well tolerated with neither immediate nor longer-term adverse events observed. In three out of four cases IVIg was an effective adjunctive therapy and well tolerated for the management of treatment-refractory uveitis.

  11. Evaluation of nutritional status in children with refractory epilepsy

    Directory of Open Access Journals (Sweden)

    Testolin G

    2006-04-01

    Full Text Available Abstract Background children affected by refractory epilepsy could be at risk of malnutrition because of feeding difficulties (anorexia, chewing, swallowing difficulties or vomiting and chronic use of anticonvulsants, which may affect food intake and energy metabolism. Moreover, their energy requirement may be changed as their disabilities would impede normal daily activities. The aim of the present study was to evaluate nutritional status, energy metabolism and food intake in children with refractory epilepsy. Methods 17 children with refractory epilepsy (13 boys and 4 girls; mean age 9 ± 3,2 years; Body Mass Index 15,7 ± 3,6 underwent an anthropometric assessment, body composition evaluation by dual-energy X-ray absorptiometry, detailed dietetic survey and measurement of resting energy expenditure by indirect calorimetry. Weight-for-age, height-for-age (stunting and weight-for-height (wasting were estimated compared to those of a reference population of the same age. Results 40% of children were malnourished and 24% were wasted. The nutritional status was worse in the more disabled children. Dietary intake resulted unbalanced (18%, 39%, 43% of total daily energy intake derived respectively from protein, lipid and carbohydrate. Adequacy index [nutrient daily intake/recommended allowance (RDA × 100] was Conclusion many children with refractory epilepsy would benefit from individual nutritional assessment and management as part of their overall care.

  12. Issues Impacting Refractory Service Life in Biomass/Waste Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, J.P.; Kwong, K.-S.; Powell, C.A.

    2007-03-01

    Different carbon sources are used, or are being considered, as feedstock for gasifiers; including natural gas, coal, petroleum coke, and biomass. Biomass has been used with limited success because of issues such as ash impurity interactions with the refractory liner, which will be discussed in this paper.

  13. Immunomodulatory therapy in refractory/recurrent ovarian cancer

    Directory of Open Access Journals (Sweden)

    Chao-Yu Chen

    2015-04-01

    Conclusion: IMT alone or add-on to palliative/salvage chemotherapy for refractory/recurrent EOC achieves a substantial disease stabilizing rate without severe toxicity, which might be a potential option in selected patients. The ALC 1 month after IMT could be an early indicator to disease stabilization.

  14. Productivity costs in patients with refractory chronic rhinosinusitis.

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L; Schlosser, Rodney J; Hwang, Peter H; Mace, Jess C; Soler, Zachary M

    2014-09-01

    Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Prospective, multi-institutional, observational cohort study. The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 U.S. National Census and the 2013 U.S. Department of Labor statistics. A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism were 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r = 0.440; p = 0.001). Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

  15. Role of rectal myomectomy in refractory chronic constipation ...

    African Journals Online (AJOL)

    Background: To assess the role of diagnostic and therapeutic value of anorectal myectomy in cases of chronic refractory constipation. Materials and Methods: Twenty-eight patients 11 months to 9 years of age presenting with chronic constipation, with contrast enema showing dilated rectum and sigmoid colon were included ...

  16. Viscosity measurements of molten refractory metals using an electrostatic levitator

    International Nuclear Information System (INIS)

    Ishikawa, Takehiko; Paradis, Paul-François; Okada, Junpei T; Watanabe, Yuki

    2012-01-01

    Viscosities of several refractory metals (titanium, nickel, zirconium, niobium, ruthenium, rhodium, hafnium, iridium and platinum) and terbium have been measured by the oscillation drop method with an improved procedure. The measured data were less scattered than our previous measurements. Viscosities at their melting temperatures showed good agreement with literature values and some predicted values. (paper)

  17. Stimulus intensity and the psychological refractory period II auditive stimuli

    NARCIS (Netherlands)

    Koster, W.G.; Schuur, van R.

    1970-01-01

    In experiments in which stimuli are presented closely spaced in time, subjects exhibit a limitation in the transmission of the signals. The result is either a delayed response or a less accurate response. This phenomenon has been called the psychological refractory phase (Telford, 1931). It is

  18. Brentuximab Vedotin Treatment for Primary Refractory Hodgkin Lymphoma

    Directory of Open Access Journals (Sweden)

    Hung-Bo Wu

    2013-01-01

    Full Text Available Up to 40% of patients with advanced Hodgkin lymphoma (HL become refractory or relapsed after current standard chemotherapy, among which primary refractory HL confers a particularly poor outcome. With intensive salvage chemotherapy and autologous stem cell transplantation, the long-term remission rate for these patients was only 30%, but more selective treatments with higher therapeutic index are needed. We report the experience of using a new anti-CD30 immunotoxin, brentuximab vedotin, in salvage treatment of a 30-year-old woman with primary refractory Hodgkin lymphoma. The patient presented with SVC syndrome due to the bulky mediastinal tumor and was confirmed to have classical Hodgkin lymphoma, nodular sclerosis type, stage IIIA. The tumor responded to induction chemotherapy transiently, but local progression was noted during subsequent cycles of treatment. Salvage radiotherapy to the mediastinal tumor, obtained no remission but was followed by rapid in-field progression and then lung metastasis. She declined stem cell transplantation and received salvage brentuximab vedotin (BV therapy, which induced dramatic shrinkage of tumor without significant side effects. Serial followup of PET/CT imaging confirmed a rapid and continuous complete remission for 12 months. Although durability of the remission needs further observation, this case illustrates the excellent efficacy of brentuximab vedotin in primary refractory Hodgkin lymphoma.

  19. USE OF STRUCTURAL MRI IN PATIENTS WITH MEDICALLY REFRACTORY SEIZURES

    Directory of Open Access Journals (Sweden)

    Ara G. Kaprelyan

    2012-12-01

    Full Text Available Introduction: Refractory epilepsy is common in patients with structural brain lesions including acquired disorders and genetic abnormalities. Recently, MRI is a precise diagnostic tool for recognition of different structural causes underlying medically intractable seizures.Objective: To evaluate the usefulness of MRI for detection of brain lesions associated with refractory epilepsy.Material and methods: 49 patients (20M and 29F; aged 48.6±24.7 years with refractory epilepsy were included in the study. They presented with partial (46.0%, secondary (31.0% or primary (23.0% generalized tonic-clonic seizures. Clinical diagnosis was based on the revised criteria of ILAE. Structural neuroimaging (MRI, EEG recording, and neurological examination were performed.Results: MRI detected different structural brain abnormalities totally in 36 (73.5% patients, including cerebral tumors (21p, cerebrovascular accidents (5p, hyppocampal sclerosis (3p, developmental malformations (2p, postencephalitic lesions (2p, arachnoid cysts (2p, and tuberous sclerosis (1p. Neuroimaging revealed normal findings in 13 (27.5% cases. EEG recordings showed focal epileptic activity in 38 (77.6% patients, including 33 cases with and 5 without structural brain abnormalities.Conclusion: This study revealed that structural brain lesions are commonly associated with refractory epilepsy. We suggested that MRI is a useful diagnostic method for assessment of patients with uncontrolled seizures or altered epileptic pattern.

  20. Refractory thermowell for continuous high temperature measurement of molten metal

    International Nuclear Information System (INIS)

    Thiesen, T.J.

    1992-01-01

    This patent describes a vessel for handling molten metal having an interior refractory lining, apparatus for continuous high temperature measurement of the molten metal. It comprises a thermowell; the thermowell containing a multiplicity of thermocouples; leads being coupled to a means for continuously indicating the temperature of the molten metal in the vessel

  1. Penetration and Effectiveness of Micronized Copper in Refractory Wood Species.

    Science.gov (United States)

    Civardi, Chiara; Van den Bulcke, Jan; Schubert, Mark; Michel, Elisabeth; Butron, Maria Isabel; Boone, Matthieu N; Dierick, Manuel; Van Acker, Joris; Wick, Peter; Schwarze, Francis W M R

    2016-01-01

    The North American wood decking market mostly relies on easily treatable Southern yellow pine (SYP), which is being impregnated with micronized copper (MC) wood preservatives since 2006. These formulations are composed of copper (Cu) carbonate particles (CuCO3·Cu(OH)2), with sizes ranging from 1 nm to 250 μm, according to manufacturers. MC-treated SYP wood is protected against decay by solubilized Cu2+ ions and unreacted CuCO3·Cu(OH)2 particles that successively release Cu2+ ions (reservoir effect). The wood species used for the European wood decking market differ from the North American SYP. One of the most common species is Norway spruce wood, which is poorly treatable i.e. refractory due to the anatomical properties, like pore size and structure, and chemical composition, like pit membrane components or presence of wood extractives. Therefore, MC formulations may not suitable for refractory wood species common in the European market, despite their good performance in SYP. We evaluated the penetration effectiveness of MC azole (MCA) in easily treatable Scots pine and in refractory Norway spruce wood. We assessed the effectiveness against the Cu-tolerant wood-destroying fungus Rhodonia placenta. Our findings show that MCA cannot easily penetrate refractory wood species and could not confirm the presence of a reservoir effect.

  2. Refractory primary immune thrombocytopenia with subsequent del(5q) MDS

    DEFF Research Database (Denmark)

    Bech Mortensen, Thomas; Frederiksen, Henrik; Marcher, Claus Werenberg

    2017-01-01

    A patient with refractory primary immune thrombocytopenia (ITP) characterised by severe skin and mucosal bleedings was treated with several ITP-directed therapies including cyclophosphamide. He later developed therapy-related del(5q) myelodysplastic syndrome with no dysplastic morphological featu...

  3. Use of sedation to relieve refractory symptoms in dying patients ...

    African Journals Online (AJOL)

    Indications. Agitated delirium was the most common reason (45%) for using sedation, followed by intractable vomiting due to inoperable malignant intestinal obstruction in 25% of patients. Three patients with persistent convulsions or myoclonic jerking and 2 patients with severe refractory dyspnoea required some sedation.

  4. On calculation of lattice parameters of refractory metal solid solutions

    International Nuclear Information System (INIS)

    Barsukov, A.D.; Zhuravleva, A.D.; Pedos, A.A.

    1995-01-01

    Technique for calculating lattice periods of solid solutions is suggested. Experimental and calculation values of lattice periods of some solid solutions on the basis of refractory metals (V-Cr, Nb-Zr, Mo-W and other) are presented. Calculation error was correlated with experimental one. 7 refs.; 2 tabs

  5. Aborted and refractory status epilepticus in children : A comparative analysis

    NARCIS (Netherlands)

    Lambrechtsen, Florise A. C. P.; Buchhalter, Jeffrey R.

    Purpose: The aims of this retrospective study were: (1) to compare the demographics, clinical characteristics, etiology, and EEG findings of status epilepticus aborted with medication (ASE) and refractory status epilepticus (RSE), (2) to describe the treatment response of status epilepticus (SE),

  6. Clinical and microbiological features of refractory periodontitis subjects.

    Science.gov (United States)

    Colombo, A P; Haffajee, A D; Dewhirst, F E; Paster, B J; Smith, C M; Cugini, M A; Socransky, S S

    1998-02-01

    The purpose of this investigation was to compare the clinical parameters and the site prevalence and levels of 40 subgingival species in successfully treated and refractory periodontitis subjects. 94 subjects received scaling and root planing and if needed, periodontal surgery and systemically administered tetracycline. 28 refractory subjects showed mean full mouth attachment loss and/or > 3 sites showing attachment loss > 2.5 mm within 1 year post-therapy. 66 successfully treated subjects showed mean attachment level gain and no sites with attachment loss > 2.5 mm. Baseline subgingival plaque samples were taken from the mesial aspect of each tooth and the presence and levels of 40 subgingival taxa were determined using whole genomic DNA probes and checkerboard DNA-DNA hybridization. The mean levels and % of sites colonized by each species (prevalence) was computed for each subject and differences between groups sought using the Mann-Whitney test. Most of the 40 species tested, including Actinobacillus actinomycetemcomitans, Porphyromonas gingivalis, Treponema denticola and Bacteroides forsythus, were equally or less prevalent in the refractory group. Prevotella nigrescens was significantly more prevalent in successfully treated subjects, while refractory subjects harbored a larger proportion of Streptococcus species, particularly Streptococcus constellatus. The odds of a subject being refractory was 8.6 (p or = 3.5% of the total DNA probe count. Since few microbiological differences existed between treatment outcome groups using DNA probes to known species, the predominant cultivable microbiota of 33 subgingival samples from 14 refractory subjects was examined. 85% of the 1649 isolates were identified using probes to 69 recognized subgingival species. The remaining unidentified strains were classified by analyzing 16S rRNA gene sequences. Many sequenced isolates were of taxa not considered a common part of the oral microbiota such as Acinetobacter baumanni

  7. Transient refractory material dissolution by a volumetrically-heated melt

    Energy Technology Data Exchange (ETDEWEB)

    Seiler, Jean Marie, E-mail: jean-marie.seiler@cea.fr [CEA, DEN, DTN, 17 Rue des Martyrs, 38054 Grenoble Cedex 9 (France); Ratel, Gilles [CEA, DEN, DTN, 17 Rue des Martyrs, 38054 Grenoble Cedex 9 (France); Combeau, Hervé [Institut Jean Lamour, UMR 7198, Lorraine University, Ecole des Mines de Nancy, Parc de Saurupt, 54042 Nancy Cedex (France); Gaus-Liu, Xiaoyang; Kretzschmar, Frank; Miassoedov, Alexei [Karlsruhe Institut of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2014-12-15

    Highlights: • We describe a test investigating ceramic dissolution by a molten non-eutectic melt. • The evolution of the interface temperature between melt and refractory is measured. • A theoretical model describing dissolution kinetics is proposed. • When dissolution stops, interface temperature is the liquidus temperature of the melt. - Abstract: The present work addresses the question of corium–ceramic interaction in a core catcher during a core-melt accident in a nuclear power plant. It provides an original insight into transient aspects concerning dissolution of refractory material by a volumetrically heated pool. An experiment with simulant material (LIVECERAM) is presented. Test results clearly show that dissolution of solid refractory material can occur in a non-eutectic melt at a temperature which is lower than the melting temperature of the refractory material. During the dissolution transient, the interface temperature rises above the liquidus temperature, corresponding to the instantaneous average composition of the melt pool. With constant power dissipation in the melt and external cooling of the core-catcher, a final steady-state situation is reached. Dissolution stops when the heat flux (delivered by the melt to the refractory) can be removed by conduction through the residual thickness of the ceramic, with T{sub interface} = T{sub liquidus} (calculated for the average composition of the final liquid pool). The final steady state corresponds to a uniform pool composition and uniform interface temperature distribution. Convection in the pool is governed by natural thermal convection and the heat flux distribution is therefore similar to what would be obtained for a single component pool. An interpretation of the experiment with two model-based approaches (0D and 1D) is presented. The mass transfer kinetics between the interface and the bulk is controlled by a diffusion sublayer within the boundary layer. During the dissolution transient

  8. Illness identity in young adults with refractory epilepsy.

    Science.gov (United States)

    Luyckx, Koen; Oris, Leen; Raymaekers, Koen; Rassart, Jessica; Moons, Philip; Verdyck, Ludo; Mijnster, Teus; Mark, Ruth E

    2018-03-01

    Refractory epilepsy is an intrusive condition with important implications for daily functioning in emerging and young adulthood. The present study examined the degree to which refractory epilepsy is integrated in one's identity, and examined how such a sense of illness identity was related to health-related quality of life (HRQOL). A total of 121 18- to 40-year-old patients with refractory epilepsy (56.2% women) completed self-report questionnaires assessing the four illness identity states of acceptance, enrichment, engulfment, and rejection (Illness Identity Questionnaire (IIQ)); HRQOL (Quality of Life in Epilepsy Inventory - 31); and seizure frequency and severity (Liverpool Seizure Severity Scale (LSSS)). Illness identity scores were compared with a sample of 191 patients with a nonneurological chronic disease (congenital heart disease). Hierarchical regression analyses were conducted to assess the predictive value of illness identity for HRQOL when simultaneously controlling for demographic and clinical features. Patients with refractory epilepsy scored higher on rejection and engulfment and lower on acceptance when compared with patients with congenital heart disease. Further, seizure severity and number of medication side-effects were positively related to engulfment and negatively to acceptance. Finally, when simultaneously controlling for various demographic and clinical variables, illness identity significantly predicted HRQOL (with engulfment being the strongest and most consistent predictor). The extent to which patients with refractory epilepsy succeed in integrating their illness into their identity may have important implications for HRQOL. Clinicians should be especially attentive for signs that patients feel engulfed by their epilepsy. Copyright © 2018 Elsevier Inc. All rights reserved.

  9. Immunomodulatory therapy in refractory/recurrent ovarian cancer.

    Science.gov (United States)

    Chen, Chao-Yu; Lai, Chyong-Huey; Yang, Lan-Yan; Tang, Yun-Hsin; Chou, Hung-Hsueh; Chang, Chee-Jen; Lin, Cheng-Tao

    2015-04-01

    To investigate the efficacy and toxicity of immunomodulatory therapy (IMT) alone or as an add-on to palliative/salvage chemotherapy in patients with refractory/recurrent epithelial ovarian cancer (EOC). We retrospectively analyzed the efficacy and toxicity of IMT in 15 patients with refractory/recurrent EOC who had previously received multiple chemotherapy regimens. The median age of the patients was 56 years (range, 41-75 years). Three patients were platinum-sensitive, two were platinum-resistant, and the remaining 10 patients were refractory to platinum-based front-line chemotherapy. IMT consisted of picibanil (OK-432) on Day 1, interleukin-2 and/or interferon-α on Day 2 administered by subcutaneous injection (every week or 2-weekly). Five patients never received metronomic oral cyclophosphamide. After IMT, three patients achieved partial remission (PR, lasting for 11 months, ≥ 12 months, and 16 months), and six patients had stable disease (SD). The disease stabilizing rate (PR+SD) was 60% (3/3 in platinum-sensitive and 6/12 in platinum-resistant/refractory patients). The absolute lymphocyte count (ALC) at 1 month after IMT was significantly higher in the PR+SD group (median 1242.0/μL) than in the progression group (median 325.0/μL) (p = 0.012). No ≥ Grade 3 toxicities were observed. The median post-IMT survival time was 12 months (range, 2-39 months). IMT alone or add-on to palliative/salvage chemotherapy for refractory/recurrent EOC achieves a substantial disease stabilizing rate without severe toxicity, which might be a potential option in selected patients. The ALC 1 month after IMT could be an early indicator to disease stabilization. Copyright © 2015. Published by Elsevier B.V.

  10. Ixabepilone: a new chemotherapeutic option for refractory metastatic breast cancer

    Directory of Open Access Journals (Sweden)

    Shannon Puhalla

    2008-09-01

    Full Text Available Shannon Puhalla, Adam BrufskyUPMC Magee-Womens Cancer Program, University of Pittsburgh, Pittsburgh, Pennsylvania, USAAbstract: Taxane therapy is commonly used in the treatment of metastatic breast cancer. However, most patients will eventually become refractory to these agents. Ixabepilone is a newly approved chemotherapeutic agent for the treatment of metastatic breast cancer. Although it targets microtubules similarly to docetaxel and paclitaxel, ixabepilone has activity in patients that are refractory to taxanes. This review summarizes the pharmacology of ixapebilone and clinical trials with the drug both as a single agent and in combination. Data were obtained using searches of PubMed and abstracts of the annual meetings of the American Society of Clinical Oncology and the San Antonio Breast Cancer Symposium from 1995 to 2008. Ixapebilone is a semi-synthetic analog of epothilone B that acts to induce apoptosis of cancer cells via the stabilization of microtubules. Phase I clinical trials have employed various dosing schedules ranging from daily to weekly to 3-weekly. Dose-limiting toxicites included neuropathy and neutropenia. Responses were seen in a variety of tumor types. Phase II studies verified activity in taxane-refractory metastatic breast cancer. The FDA has approved ixabepilone for use as monotherapy and in combination with capecitabine for the treatment of metastatic breast cancer. Ixabepilone is an efficacious option for patients with refractory metastatic breast cancer. The safety profile is similar to that of taxanes, with neuropathy and neutropenia being dose-limiting. Studies are ongoing with the use of both iv and oral formulations and in combination with other chemotherapeutic and biologic agents.Keywords: ixabepilone, epothilone, metastatic breast cancer, taxane-refractory

  11. Vernakalant selectively prolongs atrial refractoriness with no effect on ventricular refractoriness or defibrillation threshold in pigs.

    Science.gov (United States)

    Bechard, Jeff; Gibson, John Ken; Killingsworth, Cheryl R; Wheeler, Jeffery J; Schneidkraut, Marlowe J; Huang, Jian; Ideker, Raymond E; McAfee, Donald A

    2011-03-01

    Vernakalant is a novel antiarrhythmic agent that has demonstrated clinical efficacy for the treatment of atrial fibrillation. Vernakalant blocks, to various degrees, cardiac sodium and potassium channels with a pattern that suggests atrial selectivity. We hypothesized, therefore, that vernakalant would affect atrial more than ventricular effective refractory period (ERP) and have little or no effect on ventricular defibrillation threshold (DFT). Atrial and ventricular ERP and ventricular DFT were determined before and after treatment with vernakalant or vehicle in 23 anesthetized male mixed-breed pigs. Vernakalant was infused at a rate designed to achieve stable plasma levels similar to those in human clinical trials. Atrial and ventricular ERP were determined by endocardial extrastimuli delivered to the right atria or right ventricle. Defibrillation was achieved using external biphasic shocks delivered through adhesive defibrillation patches placed on the thorax after 10 seconds of electrically induced ventricular fibrillation. The DFT was estimated using the Dixon "up-and-down" method. Vernakalant significantly increased atrial ERP compared with vehicle controls (34 ± 8 versus 9 ± 7 msec, respectively) without significantly affecting ventricular ERP or DFT. This is consistent with atrial selective actions and supports the conclusion that vernakalant does not alter the efficacy of electrical defibrillation.

  12. Comparative evaluation of the locally manufactured low-alumina fireclay refractories

    International Nuclear Information System (INIS)

    Mohammad, D.; Ahmed, W.; Khan, M.I.

    2007-01-01

    Properties of domestically produced low-alumina refractories commonly known as medium duty fireclay refractories were studied and a comparative evaluation was performed. Refractory properties such as density, porosity, cold strength, reheat change and deformation at high-temperature were determined. Significant differences were discovered between these products sold as medium duty fireclay refractories. One brand marketed as medium duty refractory was found to be too inferior to be designated as medium duty firebrick. Absence of any standards and lack of awareness on the part of users of the various test methods appear to be the cause of this situation. (author)

  13. Evaluation of Alternative Refractory Materials for the Main Flame Deflectors at KSC Launch Complexes

    Science.gov (United States)

    Calle, Luz Marina; Trejo, David; Rutkowsky, Justin

    2006-01-01

    The deterioration of the refractory materials used to protect the KSC launch complex steel base structures from the high temperatures during launches results in frequent and costly repairs and safety hazards. KSC-SPEC-P-0012, Specification for Refractory Concrete, is ineffective in qualifying refractory materials. This study of the specification and of alternative refractory materials recommends a complete revision of the specification and further investigation of materials that were found to withstand the environment of the Solid Rocket Booster main flame deflector better than the refractory materials in current use in terms of compressive strength, tensile strength, modulus of rupture, shrinkage, and abrasion.

  14. Migration of TRU-containing slag into candidate refractories for waste management

    International Nuclear Information System (INIS)

    Seymour, W.C.

    1978-11-01

    Results of initial tests on transuranic migration into commercial refractories are reported. Five castable refractories and a plastic-bonded refractory were tested using the cup test method. Initial results indicate that castable materials will not survive conditions expected in the slagging pyrolysis unit; plastic refractories appear to have better performance. The major mechanism of migration into the tested refractories is pore penetration. Al 2 O 3 and Al 2 O 3 -Cr 2 O 3 phases appear resistant to chemical diffusion of transuranics. 2 figures, 16 tables

  15. Isotopically modified compounds

    International Nuclear Information System (INIS)

    Kuruc, J.

    2009-01-01

    In this chapter the nomenclature of isotopically modified compounds in Slovak language is described. This chapter consists of following parts: (1) Isotopically substituted compounds; (2) Specifically isotopically labelled compounds; (3) Selectively isotopically labelled compounds; (4) Non-selectively isotopically labelled compounds; (5) Isotopically deficient compounds.

  16. Medical versus surgical treatment for refractory or recurrent peptic ulcer.

    Science.gov (United States)

    Gurusamy, Kurinchi Selvan; Pallari, Elena

    2016-03-29

    Refractory peptic ulcers are ulcers in the stomach or duodenum that do not heal after eight to 12 weeks of medical treatment or those that are associated with complications despite medical treatment. Recurrent peptic ulcers are peptic ulcers that recur after healing of the ulcer. Given the number of deaths due to peptic ulcer-related complications and the long-term complications of medical treatment (increased incidence of fracture), it is unclear whether medical or surgical intervention is the better treatment option in people with recurrent or refractory peptic ulcers. To assess the benefits and harms of medical versus surgical treatment for people with recurrent or refractory peptic ulcer. We searched the specialised register of the Cochrane Upper GI and Pancreatic Diseases group, the Cochrane Central Register of Controlled Trials (CENTRAL) in the Cochrane Library, MEDLINE, EMBASE, Science Citation Index Expanded, and trials registers until September 2015 to identify randomised trials and non-randomised studies, using search strategies. We also searched the references of included studies to identify further studies. We considered randomised controlled trials and non-randomised studies comparing medical treatment with surgical treatment in people with refractory or recurrent peptic ulcer, irrespective of language, blinding, or publication status for inclusion in the review. Two review authors independently identified trials and extracted data. We planned to calculate the risk ratio, mean difference, standardised mean difference, or hazard ratio with 95% confidence intervals using both fixed-effect and random-effects models with Review Manager 5 based on intention-to-treat analysis. We included only one non-randomised study published 30 years ago in the review. This study included 77 participants who had gastric ulcer and in whom medical therapy (histamine H2 receptor blockers, antacids, and diet) had failed after an average duration of treatment of 29 months. The

  17. New applications and novel processing of refractory metal alloys

    International Nuclear Information System (INIS)

    Briant, C.L.

    2001-01-01

    Refractory metals have often been limited in their application because of their propensity to oxidize and to undergo a loos of yield strength at elevated temperatures. However, recent developments in both processing and alloy composition have opened the possibility that these materials might be used in structural applications that were not considered possible in the past. At the same time, the use of refractory metals in the electronics industry is growing, particularly with the use of tantalum as a diffusion barrier for copper metallization. Finally, the application of grain boundary engineering to the problem of intergranular fracture in these materials may allow processes to be developed that will produce alloys with a greater resistance to fracture. (author)

  18. Performance of refractory alloy-clad fuel pins

    International Nuclear Information System (INIS)

    Dutt, D.S.; Cox, C.M.; Millhollen, M.K.

    1984-12-01

    This paper discusses objectives and basic design of two fuel-cladding tests being conducted in support of SP-100 technology development. Two of the current space nuclear power concepts use conventional pin type designs, where a coolant removes the heat from the core and transports it to an out-of-core energy conversion system. An extensive irradiation testing program was conducted in the 1950's and 1960's to develop fuel pins for space nuclear reactors. The program emphasized refractory metal clad uranium nitride (UN), uranium carbide (UC), uranium oxide (UO 2 ), and metal matrix fuels (UCZr and BeO-UO 2 ). Based on this earlier work, studies presented here show that UN and UO 2 fuels in conjunction with several refractory metal cladding materials demonstrated high potential for meeting space reactor requirements and that UC could serve as an alternative but higher risk fuel

  19. Direct brazing of ceramics, graphite, and refractory metals

    International Nuclear Information System (INIS)

    Canonico, D.A.; Cole, N.C.; Slaughter, G.M.

    1976-03-01

    ORNL has been instrumental in the development of brazing filler metals for joining ceramics, graphite, and refractory metals for application at temperatures above 1000 0 C. The philosophy and techniques employed in the development of these alloys are presented. A number of compositions are discussed that have been satisfactorily used to braze ceramics, graphite, and refractory metals without a prior surface treatment. One alloy, Ti--25 percent Cr--21 percent V, has wet and flowed on aluminum oxide and graphite. Further, it has been utilized in making brazes between different combinations of the three subject materials. The excellent flowability of this alloy and alloys from the Ti--Zr--Ge system is evidenced by the presence of filler metal in the minute pores of the graphite and ceramics

  20. Method for hot pressing irregularly shaped refractory articles

    Science.gov (United States)

    Steinkamp, William E.; Ballard, Ambrose H.

    1982-01-01

    The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

  1. Unusual cause of respiratory distress misdiagnosed as refractory asthma

    Directory of Open Access Journals (Sweden)

    Al-Otair Hadil

    2006-01-01

    Full Text Available We report a young lady, who was labeled as a case of refractory asthma for a few years, based on history of shortness of breath on minimal exertion, noisy breathing and normal chest radiograph. Repeated upper airway exam by an otolaryngologist and computerized tomography scan, were normal. On presentation to our hospital, she was diagnosed to have fixed upper airway obstruction, based on classical flow-volume loop findings. Fibroptic bronchoscopy revealed a web-shaped subglottic stenosis. The histopathology of a biopsy taken from that area, showed non-specific inflammation. No cause for this stenosis could be identified. The patient was managed with rigid bronchoscopy dilatation, without recurrence. We report this case as idiopathic subglottic stenosis, that was misdiagnosed as refractory bronchial asthma, stressing the importance of performing spirometry in the clinic.

  2. Omeprazole for Refractory Gastroesophageal Reflux Disease during Pregnancy and Lactation

    Directory of Open Access Journals (Sweden)

    John K Marshall

    1998-01-01

    Full Text Available Symptomatic gastroesophageal reflux is a common complication of pregnancy and lactation. However, the safety of many effective medical therapies, including oral proton pump inhibitors, has not been well defined. The administration of oral omeprazole to a 41-year-old female during the third trimester of pregnancy, after ranitidine and cisapride failed to control her refractory gastroesophageal reflux, is reported. No adverse fetal effects were apparent, and the patient elected to continue omeprazole therapy (20 mg/day while breastfeeding. Peak omeprazole concentrations in breast milk (58 nM, 3 h after ingestion were less than 7% of the peak serum concentration (950 nM at 4 h, indicating minimal secretion. Although omeprazole is a potentially useful therapy for refractory gastroesophageal reflux during pregnancy and lactation, further data are needed to define better its safety and efficacy.

  3. Classical management of refractory adult immune (idiopathic) thrombocytopenic purpura.

    Science.gov (United States)

    McMillan, R

    2002-03-01

    Treatment of chronic immune (idiopathic) thrombocytopenic purpura with corticosteroids and/or splenectomy results in safe platelet counts in over 70% of patients without additional treatment. Therapy of patients who are refractory to these two treatments may be difficult. The treatment approach to refractory ITP patients, described in this report, is arbitrarily divided into four levels: levels 1 through 3 represent treatments with increasing side effects; level 4 therapy may be tried when the others have failed. Patients undergoing these treatments may require concomitant intravenous gammaglobulin, high-dose corticosteroids or platelets, to maintain the platelet count in the setting of mucosal bleeding or severe thrombocytopenia. Copyright 2002, Elsevier Science Ltd. All rights reserved.

  4. Low-Chrome/Chrome Free Refractories for Slagging Gasifiers

    International Nuclear Information System (INIS)

    Bennett, J.P.; Kwong, K.-S.; Powell, C.P.; Thomas, H.; Petty, A.V. Jr.

    2007-01-01

    Gasifiers are containment vessels used to react carbon-containing materials with oxygen and water, producing syngas (CO and H2) that is used in chemical and power production. It is also a potential source of H2 in a future hydrogen economy. Air cooled slagging gasifiers are one type of gasifier, operating at temperatures from 1275-1575 C and at pressures of 400 psi or higher. They typically use coal or petroleum coke as the carbon source, materials which contain ash impurities that liquefy at the gasification temperatures, producing liquid slag in quantities of 100 or more tons/day, depending on the carbon fed rate and the percent ash present in the feedstock. The molten slag is corrosive to refractory linings, causing chemical dissolution and spalling. The refractory lining is composed of chrome oxide, alumina, and zirconia; and is replaced every 3-24 months. Gasifier users would like greater on-line availability and reliability of gasifier liners, something that has impacted gasifier acceptance by industry. Research is underway at NETL to improve refractory service life and to develop a no-chrome or low-chrome oxide alternative refractory liner. Over 250 samples of no- or low-chrome oxide compositions have been evaluated for slag interactions by cup testing; with potential candidates for further studies including those with ZrO2, Al2O3, and MgO materials. The development of improved liner materials is necessary if technologies such as IGCC and DOE's Near Zero Emissions Advanced Fossil Fuel Power Plant are to be successful and move forward in the marketplace

  5. Oral cyclosporine therapy for refractory severe vernal keratoconjunctivitis

    Directory of Open Access Journals (Sweden)

    Nikhil S Gokhale

    2012-01-01

    Full Text Available We report the success of oral cyclosporine therapy in a patient with severe vision-threatening vernal keratoconjunctivitis. A child presented with severe allergy which was not controlled with topical steroids, cyclosporine and mast cell stabilizers. Oral steroids were required repeatedly to suppress inflammation. Child showed a dramatic improvement and stabilization with oral cyclosporine therapy. Oral cyclosporine therapy can be tried in severe vision-threatening allergy refractory to conventional therapy.

  6. Chronic, refractory CRPS involving 3 limbs: a case report.

    Science.gov (United States)

    Zyluk, A

    2013-06-01

    We report the case of a 26-year-old woman with CRPS involving consecutively 3 extremities during 8 years. None of the treatments used was effective and each CRPS episode resulted in persistence and chronification of the disease. We suggest that this patient presents a specific subtype of the disease, called "chronic, refractory CRPS" which is extremely severe, disabling and resistant to treatment. © Georg Thieme Verlag KG Stuttgart · New York.

  7. Evaluation of nutritional status in children with refractory epilepsy

    OpenAIRE

    Bertoli, S.; Cardinali, S.; Veggiotti, P.; Trentani, C.; Testolin, G.; Tagliabue, A.

    2006-01-01

    Abstract Background children affected by refractory epilepsy could be at risk of malnutrition because of feeding difficulties (anorexia, chewing, swallowing difficulties or vomiting) and chronic use of anticonvulsants, which may affect food intake and energy metabolism. Moreover, their energy requirement may be changed as their disabilities would impede normal daily activities. The aim of the present study was to evaluate nutritional status, energy metabolism and food intake in children with ...

  8. Association of interleukin 17 / angiotensin II with refractory ...

    African Journals Online (AJOL)

    Table 2 Multiple linear regression analysis showing relationship between IL 17, Ang II and mean arterial pressure in hemodialysis patients. Variables. B t value. P value. IL 17. 6.320. 10.221. 0.000. Ang II. 0.143. 2.442. 0.017. Discussion. This study aimed to investigate the association between. IL 17 and the risk of refractory ...

  9. Percutaneous radiofrequency treatment for refractory anteromedial pain of osteoarthritic knees.

    Science.gov (United States)

    Ikeuchi, Masahiko; Ushida, Takahiro; Izumi, Masashi; Tani, Toshikazu

    2011-04-01

    Although severe knee osteoarthritis with refractory pain is commonly treated surgically, this is often not an option for patients with poor health status or unwillingness to undergo major surgery. We examined the efficacy of radiofrequency application to sensory nerves as a novel alternative treatment for refractory knee pain. This study was an open-label, nonrandomized, and controlled study. Patients complaining of refractory anteromedial knee pain associated with radiological osteoarthritis (moderate or severe) were included. They were assigned to one of two groups: those receiving radiofrequency thermocoagulation (N = 18) or those receiving nerve block (N = 17), depending on the time period that they were referred to the clinic. Radiofrequency current or local anesthetics was applied to the medial retinacular nerve and the infrapatellar branch of the saphenous nerve. Western Ontario McMaster Universities osteoarthritis index score, pain visual analog scale (VAS), and patient's global assessment were assessed with a minimum follow-up of 6 months.   Radiofrequency treatment significantly decreased knee pain as measured by VAS for 12 weeks compared with the control group. In terms of responders, more patients in the RF group responded to the treatment than in the control group. The differences were statistically significant at 4 weeks, 8 weeks, and 12 weeks in pain VAS. Eight patients (44%) treated with radiofrequency rated excellent or good but only three (18%) in the control group rated good, although the difference was not statistically significant. Some patients were able to benefit substantially from radiofrequency treatment. Even if its effective period is limited, radiofrequency application is a promising treatment to alleviate refractory anteromedial knee pain with osteoarthritis. Further experience and technical improvements are needed to establish its role in the management of knee osteoarthritis. Wiley Periodicals, Inc.

  10. Managing trichomonal vaginitis refractory to conventional treatment with metronidazole.

    OpenAIRE

    Ahmed-Jushuf, I H; Murray, A E; McKeown, J

    1988-01-01

    Three patients with vulvovaginitis caused by Trichomonas vaginalis, which was refractory to conventional treatment with metronidazole are described. The T vaginalis strain isolated from one patient was resistant to metronidazole (minimum inhibitory concentration (MIC) more than 100 mg/l) under aerobic conditions, although under anaerobic conditions it was as susceptible as a normal reference strain. The effect of the concomitant use of other medication and the influence of other vaginal patho...

  11. Development of a Refractory High Entropy Superalloy (Postprint)

    Science.gov (United States)

    2016-03-17

    hardened with HfC precipitates [2], Co-Re- or Co-Al-W-based alloys [3] or two-phase ( FCC + L12) refractory superalloys based on platinum group metals...Ni-based superalloys consisting of cuboids with the ordered L12 structure embedded in an FCC solid-solution matrix. Based on this microstructural...and 5). A comparison of the average atomic radii with the measured lattice parameters allows us to conclude that the disordered BCC phase forming

  12. Performance Evaluation of Refractory Composite Coatings in Potassium Rich Environment

    Directory of Open Access Journals (Sweden)

    Kristina BRINKIENĖ

    2016-09-01

    Full Text Available A laboratory scale method was used to study the performance of reinforced cement composites in potassium rich environment of biomass combustion. Buckwheat husk (BH was used as potential source of unexploited biomass product applicable as biomass derived fuel. In order to enhance the alkali effect on the properties of the investigated materials, the solution of potassium carbonate (K2CO3 was selected as potassium rich aggressive environment. Two reinforced cement composites as potential repair coatings for restoration of damaged refractory surfaces with different composition of aggregate were used in corrosion tests. Performance of refractory coatings was evaluated by analysing the microstructure of the treated composites as well as mechanical properties. Energy-dispersive X-ray spectroscopy (SEM/EDS and optical microscopy were used to study the microstructure in the corroded region of the refractory coatings. Long term studies in the solution of 1M K2CO3 for 56 months have demonstrated that composite with the additive of fluid cracking catalyst of oil refinery and petrochemical industries is more durable in the potassium rich environment.DOI: http://dx.doi.org/10.5755/j01.ms.22.3.8348

  13. Colonic exclusion and combined therapy for refractory constipation.

    Science.gov (United States)

    Peng, Hong-Yun; Xu, Ai-Zhong

    2006-12-28

    To investigate the therapeutic effectiveness of colonic exclusion and combined therapy for refractory constipation. Thirty-two patients with refractory constipation were randomly divided into treatment group (n = 14) and control group (n = 18). Fourteen patients in treatment group underwent colonic exclusion and end-to-side colorectal anastomosis. Eighteen patients in control group received subtotal colectomy and end-to-end colorectal anastomosis. The therapeutic effects of the operations were assessed by comparing the surgical time, incision length, volume of blood losses, hospital stay, recovery rate and complication incidence. All patients received long-term follow-up. All operations were successful and patients recovered fully after the operations. In comparison of treatment group and control group, the surgical time (h), incision length (cm), volume of blood losses (mL), hospital stay (d) were 87 +/- 16 min vs 194 +/- 23 min (t = 9.85), 10.4 +/- 0.5 cm vs 21.2 +/- 1.8 cm (t = 14.26), 79.5 +/- 31.3 mL vs 286.3 +/- 49.2 mL (t = 17.24), and 11.8 +/- 2.4 d vs 18.6 +/- 2.6 d (t = 6.91), respectively (P 0.05), 21.4% vs 33.3% (P = 0.73 > 0.05), respectively. Colonic exclusion has better therapeutic efficacy on refractory constipation. It has many advantages such as shorter surgical time, smaller incision, fewer blood losses and shorter hospital stay.

  14. Adalimumab for the treatment of refractory noninfectious paediatric uveitis.

    Science.gov (United States)

    Muñoz-Gallego, Alicia; Barral, Estefanía; Enríquez, Eugenia; Tejada, Pilar; Barceló, Ana; de Inocencio, Jaime

    2017-06-01

    To report the experience of our center with the use of adalimumab (ADA) for the treatment of severe refractory noninfectious paediatric uveitis. The study is a retrospective case series of all paediatric patients with refractory uveitis who were treated with ADA at the Paediatric Uveitis Unit of our center from 2008 to 2015. We present 12 patients (6 Juvenile idiopathic arthritis-associated uveitis, 4 idiopathic panuveitis, 1 early-onset sarcoidosis-associated panuveitis, and 1 intermediate uveitis), with uveitis in 19/24 eyes. Once ADA therapy was started, all the patients presented improved activity according to Standardization of Uveitis Nomenclature (SUN) criteria. Nine out of the 12 patients had structural damage before ADA could be started: cataract (n = 4), glaucoma (n = 2), cystic macular edema (n = 1), exudative retinal detachment (n = 1), and optic disk edema (n = 5). Visual acuity improved or maintained stable in 17/19 affected eyes, and only 2 eyes decreased its visual acuity because of structural damage, which was already present before ADA therapy. In our experience, ADA presents a good safety profile and is efficacious in the treatment of paediatric patients with different forms of refractory noninfectious uveitis.

  15. A refractory metal gate approach for micronic CMOS technology

    International Nuclear Information System (INIS)

    Lubowiecki, V.; Ledys, J.L.; Plossu, C.; Balland, B.

    1987-01-01

    In the future, devices scaling down, integration density and performance improvements are going to bring a number of conventional circuit design and process techniques to their fundamental limits. To avoid any severe limitations in MOS ULSI (Ultra Large Scale Integration) technologies, interconnection materials and schemes are required to emerge, in order to face the Megabits memory field. Among those, the gate approach will obviously take a keyrole, when the operating speed of ULSI chips will reach the practical upper limits imposed by parasitic resistances and capacitances which stem from the circuit interconnect wiring. Even if fairly suitable for MOS process, doped polycrystalline silicon is being gradually replaced by refractory metal silicide or polycide structures, which match better with low resistivity requirements. However, as we approach the submicronic IC's, higher conductivity materials will be paid more and more attention. Recently, works have been devoted and published on refractory metal gate technologies. Molybdenum or tungsten, deposited either by CVD or PVD methods, are currently reported even if some drawbacks in their process integration still remain. This paper is willing to present such an approach based on tungsten (more reliable than Molybdenum deposited by LPCVD (giving more conductive and more stable films than PVD). Deposition process will be first described. Then CMOS process flow will allow us to focus on specific refractory metal gate issues. Finally, electrical and physical properties will be assessed, which will demonstrate the feasibility of such a technology as well as the compatibility of the tungsten with most of the usual techniques

  16. Evaluation of nutritional status in children with refractory epilepsy.

    Science.gov (United States)

    Bertoli, S; Cardinali, S; Veggiotti, P; Trentani, C; Testolin, G; Tagliabue, A

    2006-04-26

    children affected by refractory epilepsy could be at risk of malnutrition because of feeding difficulties (anorexia, chewing, swallowing difficulties or vomiting) and chronic use of anticonvulsants, which may affect food intake and energy metabolism. Moreover, their energy requirement may be changed as their disabilities would impede normal daily activities. The aim of the present study was to evaluate nutritional status, energy metabolism and food intake in children with refractory epilepsy. 17 children with refractory epilepsy (13 boys and 4 girls; mean age 9 +/- 3,2 years; Body Mass Index 15,7 +/- 3,6) underwent an anthropometric assessment, body composition evaluation by dual-energy X-ray absorptiometry, detailed dietetic survey and measurement of resting energy expenditure by indirect calorimetry. Weight-for-age, height-for-age (stunting) and weight-for-height (wasting) were estimated compared to those of a reference population of the same age. 40% of children were malnourished and 24% were wasted. The nutritional status was worse in the more disabled children. Dietary intake resulted unbalanced (18%, 39%, 43% of total daily energy intake derived respectively from protein, lipid and carbohydrate). Adequacy index [nutrient daily intake/recommended allowance (RDA) x 100] was nutritional assessment and management as part of their overall care.

  17. Corrosion assessment of refractory materials for high temperature waste vitrification

    International Nuclear Information System (INIS)

    Marra, J.C.; Congdon, J.W.; Kielpinski, A.L.

    1995-01-01

    A variety of vitrification technologies are being evaluated to immobilize radioactive and hazardous wastes following years of nuclear materials production throughout the Department of Energy (DOE) complex. The compositions and physical forms of these wastes are diverse ranging from inorganic sludges to organic liquids to heterogeneous debris. Melt and off-gas products can be very corrosive at the high temperatures required to melt many of these waste streams. Ensuring material durability is required to develop viable treatment processes. Corrosion testing of materials in some of the anticipated severe environments is an important aspect of the materials identification and selection process. Corrosion coupon tests on typical materials used in Joule heated melters were completed using glass compositions with high salt contents. The presence of chloride in the melts caused the most severe attack. In the metal alloys, oxidation was the predominant corrosion mechanism, while in the tested refractory material enhanced dissolution of the refractory into the glass was observed. Corrosion testing of numerous different refractory materials was performed in a plasma vitrification system using a surrogate heterogeneous debris waste. Extensive corrosion was observed in all tested materials

  18. Transjugular intrahepatic portosystemic stent-shunt procedure for refractory ascites

    International Nuclear Information System (INIS)

    Zhu Wenke; Shan Hong; Zhu Kangshun; Jiang Zaibo; Li Zhengran; Huang Mingsheng; Guan Shouhai; Shen Xinying

    2004-01-01

    Objective: To assess the clinical efficacy of TIPS in the treatment of patients with refractory ascites and investigate the clinical factors associated with TIPS. Methods: 21 consecutive patients with refractory ascites, 16 men and 5 women with mean age of 45 years (range 22-69 years) were followed up for an average of 337 days (range 50-1323 days). Ascites/abdomen circumference, serum parameters, stents function, time of followed up and survival rate were analyzed. Results: The ascites was significantly reduced as compared with basal values (P<0.05). 81% and 91% patients had no or mild ascites during 3 to 6 months and 9 to 12 after TIPS respectively. According to responses to treatment within 3 months, using Logistic regression predicated the control of ascites with relation to Child class C for severe prognosis (P<0.05). There were significant change in serum sodium, serum creatinine as compared with baseline at follow-up (P<0.05). Their mortality were 14% during follow-up for 3 months, 20% in 6 and the survival rate was 72% at 1 year. According to COX regression analysis showed that age, Child class C, serum albumin, hepatic encephalopathy, serum total bilirubin were related to severe prognosis; but only hepatic encephalopathy and Child class C had an effect on survival rate. Conclusion: TIPS is an effective method for refractory ascite caused by hepatitis cirrhosis, and also effective for patients with functional renal failure but retaining of liver compensation

  19. Advances in multidisciplinary individualized treatment of refractory hepatic alveolar echinococcosis

    Directory of Open Access Journals (Sweden)

    ABUDUAINI Abulizi

    2015-04-01

    Full Text Available Hepatic alveolar echinococcosis (HAE is a zoonotic parasitic disease that seriously threatens the population in western China and compromises patients′ quality of life. With the continuous improvement in radical resection rate in recent years, late-stage HAE patients that were incurable in the past now have the opportunity for radical resection. However, patients who are not suitable candidates for radical resection still suffer from various complications and poor quality of life. Therefore, HAE is still considered a refractory and complex disease. The simple empirical treatment model provided by traditional professional discussion is unable to satisfy the treatment of advanced refractory HAE as it is unable to integrate specialized, standardized clinical skills for diagnosis and treatment. Multidisciplinary individualized treatment (MDT organically integrates the advantages of the available treatment into a reasonable individualized comprehensive treatment regimen. This review summarizes the advances in MDT for HAE as the best option to increase long-term survival, and suggests MDT as the first-line treatment for late-stage refractory hepatic alveolar echinococcosis.

  20. Super-refractory status epilepticus in West China.

    Science.gov (United States)

    Tian, L; Li, Y; Xue, X; Wu, M; Liu, F; Hao, X; Zhou, D

    2015-07-01

    This study aims to determine the general frequency, mortality, and risk factors of super-refractory status epilepticus (SRSE) versus non-refractory status epilepticus (NRSE) and refractory status epilepticus (RSE). This work is a retrospective study. Clinical data of patients who were diagnosed with status epilepticus (SE) in the neurological ward and neuro-intensive care unit of West China Hospital from January 2009 to December 2012 were collected and analyzed. A total of 98 patients were included in the study. The percentages of NRSE, RSE, and SRSE were 67.3%, 20.4%, and 12.2%, respectively. Convulsive SE was the main seizure type among the three groups. The most common cause of NRSE was related to epilepsy (EP). However, 67.7% of SRSE cases were caused by acute encephalitis. Moreover, 47% of SE and 40% of RSE cases had a history of EP, whereas only 8.3% of SRSE cases had such history (P  0.05). The general mortality of SE was 7.1%, whereas that of SRSE was 50%. During follow-up, most SRSE patients who survived have developed symptomatic EP. This study was the first to use the statistical percentage of SRSE. Approximately 12.2% of SE cases will result in SRSE, which is a challenging medical situation for doctors. Patients with first episodes and acute encephalitis were also prone to develop SRSE. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  1. Treatment of refractory chylothorax with externalized pleuroperitoneal shunts in children.

    Science.gov (United States)

    Wolff, A B; Silen, M L; Kokoska, E R; Rodgers, B M

    1999-09-01

    Traditional therapy for refractory chylothorax in the pediatric population has included pleurodesis and thoracic duct ligation. These procedures are associated with high morbidity and questionable success rates. We retrospectively reviewed our experience with 15 patients who underwent treatment for chylous effusions using pleuroperitoneal shunts with exteriorized pump chambers. Mean patient age at time of shunt placement was 2.1 (0.1 to 11.5) years and the most common indication (7 of 15) was refractory chylothorax following surgical correction of congenital heart disease. Mean chylothorax duration before shunt placement was 76 (5 to 810) days and shunts were in place for an average of 104 (12 to 365) days. A total of 19 chylous effusions (pleural or pericardial) were treated with shunts. Nine of 11 right-sided chylothoraces, 5 of 6 left-sided chylothoraces, and 2 of 2 chylopericardia resolved with shunt therapy (84% total). Pleuroperitoneal shunting failed to clear the effusion in 3 children. There were six episodes of shunt malfunction that were repaired and two episodes of infection. Inguinal or umbilical hernia developed in 4 patients. Externalized pleuroperitoneal shunting is a safe, effective, and minimally invasive treatment for children with refractory chylous effusions.

  2. Evaluation of nutritional status in children with refractory epilepsy

    Science.gov (United States)

    Bertoli, S; Cardinali, S; Veggiotti, P; Trentani, C; Testolin, G; Tagliabue, A

    2006-01-01

    Background children affected by refractory epilepsy could be at risk of malnutrition because of feeding difficulties (anorexia, chewing, swallowing difficulties or vomiting) and chronic use of anticonvulsants, which may affect food intake and energy metabolism. Moreover, their energy requirement may be changed as their disabilities would impede normal daily activities. The aim of the present study was to evaluate nutritional status, energy metabolism and food intake in children with refractory epilepsy. Methods 17 children with refractory epilepsy (13 boys and 4 girls; mean age 9 ± 3,2 years; Body Mass Index 15,7 ± 3,6) underwent an anthropometric assessment, body composition evaluation by dual-energy X-ray absorptiometry, detailed dietetic survey and measurement of resting energy expenditure by indirect calorimetry. Weight-for-age, height-for-age (stunting) and weight-for-height (wasting) were estimated compared to those of a reference population of the same age. Results 40% of children were malnourished and 24% were wasted. The nutritional status was worse in the more disabled children. Dietary intake resulted unbalanced (18%, 39%, 43% of total daily energy intake derived respectively from protein, lipid and carbohydrate). Adequacy index [nutrient daily intake/recommended allowance (RDA) × 100] was nutritional assessment and management as part of their overall care. PMID:16640779

  3. Toll-like receptor 2 expression in refractory periapical lesions.

    Science.gov (United States)

    Desai, S V; Love, R M; Rich, A M; Seymour, G J

    2011-10-01

    To investigate the expression of TLR2 in refractory periapical lesions. Refractory periapical lesion biopsies were histopathologically and clinically categorized into asymptomatic periapical granuloma (n=10), symptomatic periapical granuloma (n=10) or periapical cyst (n=10) and prepared for immunohistochemical staining using antibodies to TLR2, CD3 and CD19 or staining with methyl green pyronin. Sections were viewed under light microscopy and the presence or absence of the target cells was correlated with the histopathological and clinical data. Additionally, TLR2 expression was quantified by counting TLR(+) cells. Various mononuclear inflammatory cells in the bacteria-induced periapical lesions were reactive to TLR2 antibody, with many showing morphological similarities to lymphocytes and plasma cells. Lymphocytes were the most numerous cells in the inflammatory infiltrate. In refractory periapical granuloma, CD3(+) T cells were more numerous, whereas in periapical cysts, CD19(+) B cells were more numerous. There was a statistically significant (Pperiapical granuloma than asymptomatic periapical granuloma or periapical cyst. The presence of TLR-expressing cells in periapical granulomas and cysts provides further evidence that periapical cysts are likely to be sustained by the immune system via reaction to bacterial antigens. © 2011 International Endodontic Journal.

  4. Sub-micrometer refractory carbonaceous particles in the polar stratosphere

    Science.gov (United States)

    Schütze, Katharina; Wilson, James Charles; Weinbruch, Stephan; Benker, Nathalie; Ebert, Martin; Günther, Gebhard; Weigel, Ralf; Borrmann, Stephan

    2017-10-01

    Eleven particle samples collected in the polar stratosphere during SOLVE (SAGE III Ozone loss and validation experiment) from January until March 2000 were characterized in detail by high-resolution transmission and scanning electron microscopy (TEM/SEM) combined with energy-dispersive X-ray microanalysis. A total of 4202 particles (TEM = 3872; SEM = 330) were analyzed from these samples, which were collected mostly inside the polar vortex in the altitude range between 17.3 and 19.9 km. Particles that were volatile in the microscope beams contained ammonium sulfates and hydrogen sulfates and dominated the samples. Some particles with diameters ranging from 20 to 830 nm were refractory in the electron beams. Carbonaceous particles containing additional elements to C and O comprised from 72 to 100 % of the refractory particles. The rest were internal mixtures of these materials with sulfates. The median number mixing ratio of the refractory particles, expressed in units of particles per milligram of air, was 1.1 (mg air)-1 and varied between 0.65 and 2.3 (mg air)-1. Most of the refractory carbonaceous particles are completely amorphous, a few of the particles are partly ordered with a graphene sheet separation distance of 0.37 ± 0.06 nm (mean value ± standard deviation). Carbon and oxygen are the only detected major elements with an atomic O/C ratio of 0.11 ± 0.07. Minor elements observed include Si, S, Fe, Cr and Ni with the following atomic ratios relative to C: Si/C: 0.010 ± 0.011; S/C: 0.0007 ± 0.0015; Fe/C: 0.0052 ± 0.0074; Cr/C: 0.0012 ± 0.0017; Ni/C: 0.0006 ± 0.0011 (all mean values ± standard deviation).High-resolution element distribution images reveal that the minor elements are distributed within the carbonaceous matrix; i.e., heterogeneous inclusions are not observed. No difference in size, nanostructure and elemental composition was found between particles collected inside and outside the polar vortex. Based on chemistry and nanostructure

  5. Rubber compounding and processing

    CSIR Research Space (South Africa)

    John, MJ

    2014-06-01

    Full Text Available This chapter presents an overview on the compounding and processing techniques of natural rubber compounds. The introductory portion deals with different types of rubbers and principles of rubber compounding. The primary and secondary fillers used...

  6. NOVEL REFRACTORY MATERIALS FOR HIGH ALKALI, HIGH TEMPERATURE ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James Gordon [ORNL; Smith, Jeffrey D [ORNL; O' Hara, Kelley [University of Missouri, Rolla; Rodrigues-Schroer, Angela [Minteq International, Inc.; Colavito, [Minteq International, Inc.

    2012-08-01

    A project was led by Oak Ridge National Laboratory (ORNL) in collaboration with a research team comprised of the academic institution Missouri University of Science and Technology (MS&T), and the industrial company MINTEQ International, Inc. (MINTEQ), along with representatives from the aluminum, chemical, glass, and forest products industries. The project was to address the need for new innovative refractory compositions by developing a family of novel MgO-Al 2O3, MgAl2O4, or other similar spinel structured or alumina-based unshaped refractory compositions (castables, gunnables, shotcretes, etc.) utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques (in-situ phase formation, altered conversion temperatures, accelerated reactions, etc). This family of refractory compositions would then be tailored for use in high-temperature, high-alkaline industrial environments like those found in the aluminum, chemical, forest products, glass, and steel industries. Both practical refractory development experience and computer modeling techniques were used to aid in the design of this new family of materials. The newly developed materials were expected to offer alternative material choices for high-temperature, high-alkali environments that were capable of operating at higher temperatures (goal of increasing operating temperature by 100-200oC depending on process) or for longer periods of time (goal of twice the life span of current materials or next process determined service increment). This would lead to less process down time, greater energy efficiency for associated manufacturing processes (more heat kept in process), and materials that could be installed/repaired in a more efficient manner. The overall project goal was a 5% improvement in energy efficiency (brought about through a 20% improvement in thermal efficiency) resulting in a savings of 3.7 TBtu/yr (7.2 billion ft3 natural gas) by the year 2030. Additionally, new

  7. Efficacy of infliximab in refractory posterior uveitis in Behcet's disease patients

    OpenAIRE

    Ayman K. El Garf; Amira A. Shahin; Sherif A. Shawky; Mohammed A. Azim; Dina A. Effat; Sherry K. Abdelrahman

    2018-01-01

    Aim of the work: Ocular manifestations are the main cause of morbidity in Behcet's disease (BD). Infliximab (IFX), a chimeric monoclonal antibody directed against tumor necrosis factor-alpha, may be efficient in refractory uveitis due to BD. The aim of this study was to assess the efficacy and safety of IFX in the treatment of patients with BD-associated refractory posterior uveitis (PU). Patient and Methods: Twenty patients with refractory Behcet's PU received IFX therapy as intravenous infu...

  8. The effect of various sintering temperature on used refractory towards its physical properties

    Science.gov (United States)

    Sudibyo; Wulandari, Y. R.; Amin, M.; Azhar

    2018-01-01

    The used magnesia refractory from the kiln of cement industry was successfully recycled to new refractory using Kaolin as an adhesive. In this work, the temperatures of sintering were varied from 1000°C to 1500°C. The result shows that the increment temperature effects in sintering process will enhance refractory physical properties such as bulk density, cold crushing strength or pressure strength and thermal conductivity. Meanwhile, the porosity was decreased as the increase of the sintering temperature.

  9. Removal of nitrogen compounds from Brazilian petroleum samples by oxidation followed by liquid-liquid extraction

    Energy Technology Data Exchange (ETDEWEB)

    Conceicao, L.; Pergher, S.B.C. [Universidade Regional Integrada do Alto Uruguai e das Misses (URI), Erechim, RS (Brazil). Dept. de Quimica], E-mail: pergher@uricer.edu.br; Oliveira, J.V. [Universidade Regional Integrada do Alto Uruguai e das Misses (URI), Erechim, RS (Brazil). Dept. de Engenharia dos Alimentos; Souza, W.F. [Petroleo Brasileiro S.A. (CENPES/PETROBRAS), Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    2009-10-15

    This work reports liquid-liquid extraction of nitrogen compounds from oxidized and non-oxidized Brazilian petroleum samples. The experiments were accomplished in a laboratory-scale liquid-liquid apparatus in the temperature range of 303 K-323 K, using methanol, n-methyl-2-pyrrolidone (NMP) and N,Ndimethylformamide (DMF), and their mixtures as extraction solvents, employing solvent to sample volume ratios of 1:2, 1:1 and 2:1, exploring up to three separation stages. Results show that an increase in temperature, solvent to oil ratio, and number of equilibrium stages greatly improves the nitrogen removal from the oxidized sample (from 2600 to 200 ppm). The employed oxidation scheme is thus demonstrated to be an essential and efficient step of sample preparation for the selective liquid-liquid removal of nitrogen compounds. It is shown that the use of mixtures of DMF and NMP as well their use as co-solvents with methanol did not prove to be useful for selective nitrogen extraction since great oil losses were observed in the final process. (author)

  10. Theoretical and practical aspects about corrosion of refractories used in steel metallurgy: part 3: characterization of commercial refractories; Aspectos teoricos e praticos sobre a corrosao de refratarios utilizados na metalurgia: caracterizacao de refratarios comerciais

    Energy Technology Data Exchange (ETDEWEB)

    Braganca, S.R., E-mail: saulorb@ufrgs.br [Universidade Federal do Rio Grande Sul (DEMAT/UFRGS), RS (Brazil)

    2012-07-01

    In this study, it was reviewed the main aspects found in the literature about refractories corrosion, evaluating the feasibility of certain tests and relating them with experimental results. The physical properties and microstructure of commercial refractories were analyzed, considering the differences between them and the quality implications and probable life of the refractory. Thus, it was studied the various types of refractories used as lining on steel ladle. Magnesia-carbon and doloma-carbon refractories were analyzed, highlighting the differences between them. The examined refractory showed characteristics favoring high resistance to corrosion process, presenting a series of properties to be selected in accordance with industry practice. (author)

  11. Mechanical activation of ceramic powders and its influence on the quality of the refractory linings

    International Nuclear Information System (INIS)

    Ceganac, Z.; Acimovic, Z.; Andric, Lj.; Petrov, M.; Mihajlovic, S.

    2003-01-01

    In the paper we present results of the investigation of the influence of mechanical activation of ceramic powders-talc and alumina, on the quality of refractory linings for casting applications. It is shown that additional fine grinding of ceramic powders increases the quality of the refractory lining. Grinding and activation of the particles with various granulations contributes to the creation of the homogenous continuous layer of refractory lining on the sand moulds and cores, as well as on the evaporating polystyrene patterns for applications in the Lost foam casting process. Refractory linings obtained within the activation of particles procedure have better adherence to moulds, cores and evaporating patterns. (Original)

  12. Characterization of refractory brick based on local raw material from Lampung Province - Indonesia

    Science.gov (United States)

    Amin, Muhammad; Suryana, Yayat I.; Isnugroho, Kusno; Aji, Bramantyo B.; Birawidha, David C.; Hendronursito, Yusup

    2018-04-01

    Refractories are non-metallic inorganic materials that are difficult to melt at high temperatures and used in high-temperature casting industries. Refractories are classified into their constituent mineral feed stocks, refractories having typical plot properties commonly called fire bricks. In the manufacture of refractory bricks that exist in the market during the use of mangrove materials derived from abroad that is from China. In this research the refractory brick materials used are quartz sand, feldspart, kaolin, bentonite, and ball clay. All materials come from local Lampung Province - Indonesia. The experiment, there are 7 kinds of experimental composition, made of plot shape with size 230 mm, 65 mm in thickness, 114 mm height mould using manual press machine with 10 tons power and burning at 1400°C for 5 hours. Refractory brick product is done by physical test in the form of porosity, specific gravity, compressive strength and XRF and SEM characteristics. The result of XRF characteristic of refractory brick composition of 1 to 5 compared to the refractory brick type SK 34 in the market and the result of composition 1 is a composition close to refractory brick composition type SK 34 namely SiO2 is 54.21 %, Al2O3 is 25.38 % and test Physical of Bulk density is 2.25 g/cm3, porosity is 18.98 % and compressive strength is 325 kg/cm2.

  13. Rapid clozapine titration in treatment-refractory bipolar disorder.

    Science.gov (United States)

    Ifteni, Petru; Correll, Christoph U; Nielsen, Jimmi; Burtea, Victoria; Kane, John M; Manu, Peter

    2014-09-01

    Clozapine is effective in treatment-refractory bipolar disorder (BD). Guidelines recommend slow titration to prevent seizures, hypotension and myocarditis, but this stance is not supported by comparative data. To evaluate the safety and effectiveness of rapid clozapine titration in BD. Analysis of a consecutive cohort of treatment-refractory BD patients with mixed/manic episode admitted on alternate days to one of two units of a psychiatric hospital. On one unit, clozapine was started at 25mg followed by 25-50mg as needed every 6h (maximum=100mg/day) on day 1, followed by increases of 25-100mg/day. On the other unit, clozapine was initiated with 25mg in day 1, followed by increases of 25-50mg/day. The primary outcome was the number of days from starting clozapine until readiness for discharge, adjusted in logistic regression for the number of antipsychotics tried during the hospitalization, psychotropic co-treatments and presence of psychotic features. Patients subject to rapid (N=44) and standard (N=23) titration were similar in age, gender, smoking status, body mass index, illness severity at baseline and discharge, and highest clozapine dose. Clozapine was discontinued due to hypotension (N=1) and pneumonia (N=1) during rapid titration, and for excessive sedation (N=1) in each titration group. The number of hospital days from starting clozapine until readiness for discharge was 3.8 days shorter in the rapid titration group (12.7±6.3 vs. 16.5±5.8, p=0.0077). Rapid clozapine titration appeared safe and effective for treatment-refractory BD. The potential for shorter hospital stays justifies prospective trials of this method. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Correlation between Corneal Thickness and Degree of Myopic Refractory Error

    Directory of Open Access Journals (Sweden)

    A Mortazavi

    2005-01-01

    Full Text Available Background: corneal thickness is an important factor in refractive surgeries such as Radial Keratotomy (RK, Photo Refractive Keratotomy (PRK and Laser Insitu Keratomileusis (LASIK. This study evaluated the correlation between this factor and the degree of myopic refractory error. Methods: In this cross-sectional study, 224 myopic eyes (112 patients which had undergone LASIK operation were assessed. These patients had referred to Aban Eye Clinic, Isfahan, Iran, during August and September 2002. Corneal thickness was measured by ORB SCAN Topoghraphy, and cycloplegic refraction was performed with autorefratometery and retinoscopy. Suspected keratoconus cases and hyperopic patients were excluded. Results: The patients' age was 27.2 ± 1.36 in men (N = 35 and 30.13 ± 1.04 in women (N = 77. Mean value of myopic refractory error in male patients was 5.1 ± 0.24D and in female patients was 3.8 ± 0.36D. Mean of corneal thickness was 540 ± 5.25 µM and 530 ± 5.88 µM in male and female patients respectively. There was no correlation between the degree of myopia and corneal thickness in any of the patients. Also in this research, no relations between the age and myopia were found. Right eye (P > 0.5, r = 0.124 Left eye (P > 0.5, r = 0.104. Conclusion: Based on our findings, corneal thickness and myopic refectory error do not seem to have any relations. (r = 0.039, p = 0.684. Keywords: Corneal Thickness, Cornea, Myopia, LASIK, Refractory Error

  15. First Ti-XANES analyses of refractory inclusions from Murchison

    International Nuclear Information System (INIS)

    Simon, S.B.; Sutton, S.R.; Grossman, L.

    2009-01-01

    Ti valence in refractory phases is an important recorder of redox conditions in the early solar nebula. We report the valence of Ti in pyroxene, spinel and hibonite in spinel-hibonite and spinel-pyroxene inclusions and in a coarse hibonite grain. A system of solar composition is so reducing that Ti 3+ and Ti 4+ can coexist, making the valence of Ti a valuable indicator of f O2 conditions during formation of nebular materials. The Ti 3+ /Ti 4+ ratios observed in the Ti-rich phases fassaite and rhoenite in coarse-grained refractory inclusions from CV3 chondrites have been shown to be quantitatively consistent with formation in a gas of solar composition (log f O2 = IW-6.8), but these are the only objects in chondrites for which this is the case. Here, we report the valence of Ti in various phases in refractory inclusions from the Murchison CM2 chondrite. The second-highest temperature, major-element-bearing phase predicted to condense from a gas of solar composition, hibonite (ideally CaAl 12 O 19 ), can contain significant amounts of Ti, but the hibonite structure can have oxygen vacancies, so calculation of Ti valence from stoichiometry of electron probe analyses is not recommended for hibonite. To date, the only reported measurement of Ti valence in meteoritic hibonite was done by electron spin resonance, on coarse crystals from a Murchison hibonite-perovskite-melilite inclusion. Spinel and most of the pyroxene in CM inclusions contain too little Ti for derivation of Ti 3+ /Ti 4+ ratios from electron probe analyses. X-ray absorption near edge spectroscopy (XANES), however, allows determination of Ti valence in relatively Ti-poor phases. In the present work, we apply synchrotron microXANES to a large hibonite grain from Murchison and to spinel-hibonite (sp-hib) and spinel-pyroxene (sp-pyx) inclusions from Murchison, refractory materials whose Ti 3+ /Ti 4+ ratios have not been previously measured. Analysis of these samples allows comparison of Ti valence of (1

  16. Cost reduction with maintenance ECT in refractory bipolar disorder.

    Science.gov (United States)

    Bonds, C; Frye, M A; Coudreaut, M F; Cunningham, M; Spearing, M; McGuire, M; Guze, B

    1998-03-01

    A case report of outpatient maintenance electroconvulsive therapy (ECT) is presented in a patient with bipolar disorder type I refractory to conventional medication treatment but responsive to ECT. A cost comparison is made showing substantial savings when outpatient maintenance ECT is used in lieu of inpatient hospitalization with ECT. A detailed life chart illustrating multiple medication trials that failed to stabilize the patient accompanies the financial summary. This case highlights the advantages of outpatient maintenance ECT for bipolar depression particularly with regard to safety, efficacy, and significant health care cost reduction.

  17. Glatiramer Acetate-associated Refractory Immune Thrombocytopenic Purpura

    Directory of Open Access Journals (Sweden)

    Iftach Sagy

    2016-04-01

    Full Text Available We present a case of glatiramer acetate-associated refractory immune thrombocytopenic purpura (ITP in a female patient with multiple sclerosis. A search of MEDLINE/PubMed did not find any connection between glatiramer acetate and thrombocytopenia, specifically ITP. The autoimmune reaction was resistant to conservative ITP treatment, and was eventually managed only by splenectomy. To the best of our knowledge, this is the first report of glatiramer acetate-associated ITP. Physicians should be aware of this condition, and consider performing routine blood counts at the beginning of glatiramer acetate treatment.

  18. Novel Engineered Refractory Materials for Advanced Reactor Applications

    International Nuclear Information System (INIS)

    Shannon, Steven; Eapen, Jacob; Maria, Jon-Paul; Weber, William

    2016-01-01

    This report summarizes the results of DOE-NEUP grant 10-853. The project spanned 48 months (36 months under the original grant plus a 12 month no cost extension). The overarching goal of this work was to fabricate and characterize refractory materials engineered at the atomic scale with emphasis on their tolerance to accumulated radiation damage. With an emphasis on nano-scale structure, this work included atomic scale simulation to study the underlying mechanisms for modified radiation tolerance at these atomic scales.

  19. Determination of refractory trace elements in Chinese meteorites by RNAA

    International Nuclear Information System (INIS)

    Kraehenbuehl, U.; Burger, M.

    1989-01-01

    Some refractory trace elements are important target elements for spallation reactions in meteorites. These elements also serve to characterize the investigated meteorites. The elements Ti, Y, Zr, Hf, W and Ta were measured after radiochemical separation in chondrites from China. After acid digestion of the irradiated samples, the group separations were obtained by precipitation reactions. The necessary radiochemical purification of the pure β emitter Y was realized on a Lewatite OC 1026 column. For all the other elements discrete gamma radiation was measured. (orig.)

  20. Welding and joining of single crystals of BCC refractory metals

    International Nuclear Information System (INIS)

    Hiraoka, Yutaka; Fujii, Tadayuki

    1989-01-01

    Welding and joining is one of key technologies for the wider utilizations of a material. In the present work, the applicability of welding and joining for a single crystal of BCC refractory metal was investigated. Electron-beam welding and tungsten-inert-gas welding by a melt-run technique, and high-temperature brazing by using brazing metals such as Mo-40%Ru alloy, vanadium or platinum were conducted for molybdenum single crystal which had been prepared by means of secondary recrystallization. 12 refs.,12 figs., 2 tabs. (Author)

  1. Trace Element Abundances in Refractory Inclusions from Antarctic Micrometeorites

    Science.gov (United States)

    Greshake, A.; Hoppe, P.; Bischoff, A.

    1995-09-01

    Refractory inclusions are charcteristic components in carbonaceous chondrites. Therefore, refractory inclusions found in micrometeorites can give important hints about the relationship between micrometeorites and carbonaceous chondrites. So far, only a few inclusions were found in micrometeorites [1-4]. In this study we report the first trace element analysis of perovskite and fassaite found in micrometeorites. We studied two Antarctic micrometeorites by ASEM, EMP, and SIMS. The first particle is 120 micrometers in size mainly consisting of a fine-grained matrix of dehydrated former phyllosilikates that enclose a 5 micrometers sized perovskite [5]. The perovskite is surrounded by a 1 micrometers thick rim of ilmenite and contains up to 1.3 wt% FeO as determined by EMP. The trace element abundances were determined by SIMS following the procedure described by [6]. The REE pattern of the perovskite is shown in Fig. 1. The pattern is closely related to the Group II pattern with its typical depletion of the more refractory REEs [7]. It is also very similar to the REE abundances of perovskite from Murchison (CM) [8] and CH-chondrites [9]. This may indicate a relationship between this micrometeorite and components in carbonaceous chondrites. The second micrometeorite is 100 micrometers in size consisting of a fine-grained (20 micrometers across) and a coarse-grained (80 micrometers across) area. Both areas contain fassaite with different chemical compositions. The particle was previously analyzed by Lindstrom and Kloeck [1] without knowing the mineralogy. We carried out SIMS analysis of each area of the micrometeorite separately. The TEE patterns of these two areas are similar and show in general a Group III pattern (20-30x CI) in which the more refractory REEs are not fractionated. The negative Eu anomaly is much more apparent in the coarse-grained area and no Yb anomaly is apparent in one of the areas. This is the first CAI of a micrometeorite showing a Group III REE

  2. Relationship between mechanical characteristics and thermal shock stability of refractories

    International Nuclear Information System (INIS)

    Volkov-Husovic, T.; Raic, K.

    2003-01-01

    Thermal stability of the refractory material with the content of 60 % Al 2 O 3 was investigated. Water quench test (JUS.B.D8.319) was applied as experimental method for thermal stability testing. Damage of porous materials is commonly related to a modification of strength that is mostly a reduction. This is linked with characteristics related to pore space. Mechanical characteristics are considered such as compressive strength, dynamic modulus of elasticity and resistance parameters resulting from resonance frequency measurements, as well as ultrasonic velocity. (Original)

  3. Rescue Therapy for Refractory Vasospasm after Subarachnoid Hemorrhage

    Science.gov (United States)

    Durrant, Julia C.; Hinson, Holly E.

    2014-01-01

    Vasospasm and delayed cerebral ischemia remain to be the common causes of increased morbidity and mortality after aneurysmal subarachnoid hemorrhage. The majority of clinical vasospasm responds to hemodynamic augmentation and direct vascular intervention; however, a percentage of patients continue to have symptoms and neurological decline. Despite suboptimal evidence, clinicians have several options in treating refractory vasospasm in aneurysmal subarachnoid hemorrhage (aSAH), including cerebral blood flow enhancement, intra-arterial manipulations, and intra-arterial and intrathecal infusions. This review addresses standard treatments as well as emerging novel therapies aimed at improving cerebral perfusion and ameliorating the neurologic deterioration associated with vasospasm and delayed cerebral ischemia. PMID:25501582

  4. Crack resistance of tungsten strengthened by dispersed refractory oxides

    International Nuclear Information System (INIS)

    Babak, A.V.; Uskov, E.I.

    1984-01-01

    Investigation results are presented for crack resistance of commercial tungsten, obtained during specimen testing at temperatures of 20 deg C to Tsub(cr) (upper boundary of temperature range of ductile-brittle transition). Comparison of s-n diagrams and temperature dependences of crack resistance are conducted for commercial tungsten and tungsten strengthened by refractory oxides. It is shown that dispersion hardening increases crack resistance in the temperature range of 20 to 2000 deg C but the upper boundary of ductile-brittle shifts to the side of higher temperatures

  5. Novel Engineered Refractory Materials for Advanced Reactor Applications

    Energy Technology Data Exchange (ETDEWEB)

    Shannon, Steven [North Carolina State Univ., Raleigh, NC (United States); Eapen, Jacob [North Carolina State Univ., Raleigh, NC (United States); Maria, Jon-Paul [North Carolina State Univ., Raleigh, NC (United States); Weber, William [Univ. of Tennessee, Knoxville, TN (United States)

    2016-03-14

    This report summarizes the results of DOE-NEUP grant 10-853. The project spanned 48 months (36 months under the original grant plus a 12 month no cost extension). The overarching goal of this work was to fabricate and characterize refractory materials engineered at the atomic scale with emphasis on their tolerance to accumulated radiation damage. With an emphasis on nano-scale structure, this work included atomic scale simulation to study the underlying mechanisms for modified radiation tolerance at these atomic scales.

  6. Sanskrit Compound Processor

    Science.gov (United States)

    Kumar, Anil; Mittal, Vipul; Kulkarni, Amba

    Sanskrit is very rich in compound formation. Typically a compound does not code the relation between its components explicitly. To understand the meaning of a compound, it is necessary to identify its components, discover the relations between them and finally generate a paraphrase of the compound. In this paper, we discuss the automatic segmentation and type identification of a compound using simple statistics that results from the manually annotated data.

  7. Response to parenteral iron therapy distinguish unexplained refractory iron deficiency anemia from iron-refractory iron deficiency anemia.

    Science.gov (United States)

    Akin, M; Sarbay, H; Guler, S; Balci, Y I; Polat, A

    2016-04-01

    We evaluated that response to parenteral iron therapy could be helpful in distinguishing the types of iron deficiency anemia. This study analyzed responses to IV iron sucrose therapy of 15 children with unexplained refractory iron deficiency anemia (URIDA). We compared the results at diagnosis, 6 weeks and 6 months after the therapy. Results were compared with responses of 11 patients' results with iron-refractory iron deficiency anemia (IRIDA) from our previous study. Six weeks after the start of treatment, ferritin, MCV, MCH and Hb values were in normal range in 10 patients. The increase in Hb, MCH, MCV, and ferritin values ranged 2.6-3.5 g/dL, 1.7-4.2 pg, 2-9 fL, and 13-25 ng/mL, respectively. In five patients, Hb, MCH, and MCV mean (range) values [11.2 g/dL (11-12.2), 24.5 pg (24-25.6), and 67 fL (65-70)] were nearly normal but ferritin mean (range) values [9.8 ng/mL (8-11)] were below normal. Six weeks after the start of treatment, Hb, MCH, MCV and ferritin values of patients with IRIDA were increased. The increase in Hb, MCH, MCV, and ferritin values ranged 0.8-2.7 g/dL, 1.7-4.2 pg, 2-9 fL, and 13-25 ng/mL, respectively. IRIDA is only partially responsive to parenteral iron supplementation. In conclusion, this study demonstrated that the response to intravenous iron therapy for the URIDA cases improved blood parameters more effectively than hereditary IRIDA. Response to parenteral iron therapy would be helpful to distinguish unexplained refractory IDA from hereditary IRIDA for clinicians who do not have access to hepcidin or TMPRS6 mutation analysis. © 2016 John Wiley & Sons Ltd.

  8. Iodine I 131 Monoclonal Antibody BC8 Before Autologous Stem Cell Transplant in Treating Patients With Relapsed or Refractory Hodgkin Lymphoma or Non-Hodgkin Lymphoma

    Science.gov (United States)

    2017-11-15

    Recurrent B-Cell Non-Hodgkin Lymphoma; Recurrent Hodgkin Lymphoma; Recurrent T-Cell Non-Hodgkin Lymphoma; Refractory B-Cell Non-Hodgkin Lymphoma; Refractory Hodgkin Lymphoma; Refractory T-Cell Non-Hodgkin Lymphoma

  9. Cometary dust: the diversity of primitive refractory grains.

    Science.gov (United States)

    Wooden, D H; Ishii, H A; Zolensky, M E

    2017-07-13

    Comet dust is primitive and shows significant diversity. Our knowledge of the properties of primitive cometary particles has expanded significantly through microscale investigations of cosmic dust samples (anhydrous interplanetary dust particles (IDPs), chondritic porous (CP) IDPs and UltraCarbonaceous Antarctic micrometeorites, Stardust and Rosetta ), as well as through remote sensing ( Spitzer IR spectroscopy). Comet dust are aggregate particles of materials unequilibrated at submicrometre scales. We discuss the properties and processes experienced by primitive matter in comets. Primitive particles exhibit a diverse range of: structure and typology; distribution of constituents; concentration and form of carbonaceous and refractory organic matter; Mg- and Fe-contents of the silicate minerals; sulfides; existence/abundance of type II chondrule fragments; high-temperature calcium-aluminium inclusions and ameboid-olivine aggregates; and rarely occurring Mg-carbonates and magnetite, whose explanation requires aqueous alteration on parent bodies. The properties of refractory materials imply there were disc processes that resulted in different comets having particular selections of primitive materials. The diversity of primitive particles has implications for the diversity of materials in the protoplanetary disc present at the time and in the region where the comets formed.This article is part of the themed issue 'Cometary science after Rosetta'. © 2017 The Authors.

  10. Brazing refractory metals used in high-temperature nuclear instrumentation

    International Nuclear Information System (INIS)

    Palmer, A. J.; Woolstenhulme, C. J.

    2009-01-01

    As part of the U. S. Department of Energy (DOE)-sponsored Next Generation Nuclear Project (NGNP) currently ongoing at Idaho National Laboratory (INL), the irradiation performance of candidate high-temperature gas reactor fuels and materials is being evaluated at INL's Advanced Test Reactor (ATR). The design of the first Advanced Gas Reactor (AGR-1) TRISO fuel experiment, currently being irradiated in the ATR, required development of special techniques for brazing niobium and molybdenum. Brazing is one technique used to join refractory metals to each other and to stainless steel alloys. Although brazing processes are well established, it is difficult to braze niobium, molybdenum, and most other refractory metals because they quickly develop adherent oxides when exposed to room-temperature air. Specialized techniques and methods were developed by INL to overcome these obstacles. This paper describes the techniques developed for removing these oxides, as well as the ASME Section IX-qualified braze procedures that were developed as part of the AGR-1 project. All brazes were made using an induction coil with an inert or reducing atmosphere at low pressure. Other parameters, such as filler metals, fluxes used, and general setup procedures, are also discussed. (authors)

  11. Cyclosporine treatment of steroid-refractory ulcerative colitis during pregnancy.

    Science.gov (United States)

    Branche, Julien; Cortot, Antoine; Bourreille, Arnaud; Coffin, Benoît; de Vos, Martine; de Saussure, Philippe; Seksik, Philippe; Marteau, Philippe; Lemann, Marc; Colombel, Jean-Frédéric

    2009-07-01

    Cyclosporine is considered a safe and effective treatment of severe steroid-refractory ulcerative colitis (UC). However, few data are available concerning its safety profile in pregnant women. We report here the experience of 5 GETAID centers. In a retrospective study data on patients with severe UC treated with cyclosporine during pregnancy were extracted from medical records of consecutive patients treated between 2001 and 2007. Eight patients (median age 30.5 years old) were identified. At the time of flare-up the median duration of pregnancy was 11.5 weeks of gestation (range 4-25). Seven patients had pancolitis. All patients had more than 3 commonly used clinical and biological severity criteria. Three patients had severe endoscopic lesions and 5 patients had not. All patients received intravenous corticosteroids for at least 7 days before introduction of cyclosporine. Two patients received azathioprine during treatment with cyclosporine. No severe infections or other complications due to treatment were observed. Treatment was effective in 7/8 patients. One patient received infliximab due to cyclosporine therapy failure with a good outcome. No colectomy was performed during pregnancy. Seven pregnancies were conducted to term, but 1 in utero death occurred due to maternal absence of S-protein. Two newborns were premature, including 1 case of hypotrophy. No malformations were observed. In our experience, treatment with cyclosporine for steroid-refractory UC during pregnancy can be considered safe and effective.

  12. Effect of methazolamide in patients with refractory uveitic macular edema

    Directory of Open Access Journals (Sweden)

    Yun-Bin Jiang

    2017-07-01

    Full Text Available AIM:To evaluate the efficacy and safety of methazolamide in treating refractory uveitic macular edema. METHODS: Retrospective self-controlled study was designed. A total of 15 patients(20 eyeswith refractory uveitic macular edema which used methazolamide as adjuvant therapy were enrolled in Shanghai First People's Hospital from January 2015 to June 2016. The changes of central macular thickness(CMTand best corrected visual acuity(BCVAwere observed at baseline and 2, 4, 8wk after treatment. We also focused on the incidence of complications and relapse. RESULTS: The CMT was 445.95±154.10μm, 338.83±138.34μm, 251.50±40.20μm, 244.90±35.68μm at baseline, 2, 4 and 8wk after treatment, respectively. The differences among them were statistically significant(F=15.467, PF=5.208, PCONCLUSION: Methazolamide is beneficial in improving macular edema and vision in 4wk. When the cumulative dose is more than 1400mg, we need pay attention to the complications. After discontinuing methazolamide for 1wk, macular edema relapsed in some patients, and more than half of patients recurred after 3mo. So the patients should be followed closely in 3mo after withdrawal of methazolamide.

  13. [Underlying Mechanisms and Management of Refractory Gastroesophageal Reflux Disease].

    Science.gov (United States)

    Lee, Kwang Jae

    2015-08-01

    The prevalence of gastroesophageal reflux disease (GERD) in South Korea has increased over the past 10 years. Patients with erosive reflux disease (ERD) shows better response to proton pump inhibitors (PPIs) than those with non-erosive reflux disease (NERD). NERD is a heterogeneous condition, showing pathological gastroesophageal reflux or esophageal hypersensitivity to reflux contents. NERD patients with pathological gastroesophageal reflux or hypersensitivity to acid may respond to PPIs. However, many patients with esophageal hypersensitivity to nonacid or functional heartburn do not respond to PPIs. Therefore, careful history and investigations are required when managing patients with refractory GERD who show poor response to conventional dose PPIs. Combined pH-impedance studies and a PPI diagnostic trial are recommended to reveal underlying mechanisms of refractory symptoms. For those with ongoing reflux-related symptoms, split dose administration, change to long-acting PPIs or PPIs less influenced by CYP2C19 genotypes, increasing dose of PPIs, and the addition of alginate preparations, prokinetics, selective serotonin reuptake inhibitors, or tricyclic antidepressants can be considered. Pain modulators, selective serotonin reuptake inhibitors, or tricyclic antidepressants are more likely to be effective for those with reflux-unrelated symptoms. Surgery or endoscopic per oral fundoplication may be effective in selected patients.

  14. Processing of Refractory Metal Alloys for JOYO Irradiations

    International Nuclear Information System (INIS)

    RF Luther; ME Petrichek

    2006-01-01

    This is a summary of the refractory metal processing experienced by candidate Prometheus materiats as they were fabricated into specimens destined for testing within the JOYO test reactor, ex-reactor testing at Oak Ridge National Laboratory (ORNL), or testing within the NRPCT. The processing is described for each alloy from the point of inception to the point where processing was terminated due to the cancellation of Naval Reactor's involvement in the Prometheus Project. The alloys included three tantalum-base alloys (T-111, Ta-10W, and ASTAR-811C), a niobium-base alloy, (FS-85), and two molybdenum-rhenium alloys, one containing 44.5 w/o rhenium, and the other 47.5 w/o rhenium. Each of these alloys was either a primary candidate or back-up candidate for cladding and structural applications within the space reactor. Their production was intended to serve as a forerunner for large scale production ingots that were to be procured from commercial refractory metal vendors such as Wah Chang

  15. New-Onset Refractory Status Epilepticus: More Investigations, More Questions

    Directory of Open Access Journals (Sweden)

    Philippe Dillien

    2016-06-01

    Full Text Available A 27-year-old previously healthy woman was admitted to the hospital with recurrent seizures. Status epilepticus developed that became refractory to third-line therapy with propofol and barbiturates. The patient had a very extensive diagnostic workup including autoimmune, viral and genetic investigations. A tentative immune therapy was proposed with high doses of steroids and plasma exchanges. Our patient had an inherited heterozygous single nucleotide variant in the sequence c.1280A>G [p.Lys427Arg] of the SMC3 gene that was insufficient to explain the seizures. Surprisingly, IgM antibodies against Japanese encephalitis virus were positive on the serum drawn 11 days after symptom onset, as detected by ELISA and the immunofluorescence antibody (IFA technique. IgG antibodies were also positive using the IFA technique, but not with ELISA. The same investigations as well as the detection of the viral genome by the q-RT-PCR technique were negative on cerebrospinal fluid. Despite the suspicion of a viral infection, we concluded that our patient had a new-onset refractory status epilepticus of cryptogenic origin. Termination of the status epilepticus was obtained after 47 days, with a possible benefit from the introduction of ketamine.

  16. Brazing Refractory Metals Used In High-Temperature Nuclear Instrumentation

    International Nuclear Information System (INIS)

    Palmer, A.J.; Woolstenhulme, C.J.

    2009-01-01

    As part of the U. S. Department of Energy (DOE) sponsored Next Generation Nuclear Project (NGNP) currently ongoing at Idaho National Laboratory (INL), the irradiation performance of candidate high-temperature gas reactor fuels and materials is being evaluated at INL's Advanced Test Reactor (ATR). The design of the first Advanced Gas Reactor (AGR 1) experiment, currently being irradiated in the ATR, required development of special techniques for brazing niobium and molybdenum. Brazing is one technique used to join refractory metals to each other and to stainless steel alloys. Although brazing processes are well established, it is difficult to braze niobium, molybdenum, and most other refractory metals because they quickly develop adherent oxides when exposed to room-temperature air. Specialized techniques and methods were developed by INL to overcome these obstacles. This paper describes the techniques developed for removing these oxides, as well as the ASME Section IX-qualified braze procedures that were developed as part of the AGR-1 project. All brazes were made using an induction coil with an inert or reducing atmosphere at low pressure. Other parameters, such as filler metals, fluxes used, and general setup procedures, are also discussed

  17. Brazing refractory metals used in high-temperature nuclear instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, A. J. [Idaho National Laboratory, MS 3840, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Woolstenhulme, C. J. [EG and G Services, Inc., (United States)

    2009-07-01

    As part of the U. S. Department of Energy (DOE)-sponsored Next Generation Nuclear Project (NGNP) currently ongoing at Idaho National Laboratory (INL), the irradiation performance of candidate high-temperature gas reactor fuels and materials is being evaluated at INL's Advanced Test Reactor (ATR). The design of the first Advanced Gas Reactor (AGR-1) TRISO fuel experiment, currently being irradiated in the ATR, required development of special techniques for brazing niobium and molybdenum. Brazing is one technique used to join refractory metals to each other and to stainless steel alloys. Although brazing processes are well established, it is difficult to braze niobium, molybdenum, and most other refractory metals because they quickly develop adherent oxides when exposed to room-temperature air. Specialized techniques and methods were developed by INL to overcome these obstacles. This paper describes the techniques developed for removing these oxides, as well as the ASME Section IX-qualified braze procedures that were developed as part of the AGR-1 project. All brazes were made using an induction coil with an inert or reducing atmosphere at low pressure. Other parameters, such as filler metals, fluxes used, and general setup procedures, are also discussed. (authors)

  18. Investigation of aluminosilicate refractory for solid oxide fuel cell applications

    Science.gov (United States)

    Gentile, Paul Steven

    Stationary solid oxide fuel cells (SOFCs) have been demonstrated to provide clean and reliable electricity through electro-chemical conversion of various fuel sources (CH4 and other light hydrocarbons). To become a competitive conversion technology the costs of SOFCs must be reduced to less than $400/kW. Aluminosilicate represents a potential low cost alternative to high purity alumina for SOFC refractory applications. The objectives of this investigation are to: (1) study changes of aluminosilicate chemistry and morphology under SOFC conditions, (2) identify volatile silicon species released by aluminosilicates, (3) identify the mechanisms of aluminosilicate vapor deposition on SOFC materials, and (4) determine the effects of aluminosilicate vapors on SOFC electrochemical performance. It is shown thermodynamically and empirically that low cost aluminosilicate refractory remains chemically and thermally unstable under SOFC operating conditions between 800°C and 1000°C. Energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) of the aluminosilicate bulk and surface identified increased concentrations of silicon at the surface after exposure to SOFC gases at 1000°C for 100 hours. The presence of water vapor accelerated surface diffusion of silicon, creating a more uniform distribution. Thermodynamic equilibrium modeling showed aluminosilicate remains stable in dry air, but the introduction of water vapor indicative of actual SOFC gas streams creates low temperature (active anode interface.

  19. Open and Laparoscopic Colposuspension in Girls with Refractory Urinary Incontinence

    Directory of Open Access Journals (Sweden)

    Barbara Anna Dobrowolska-Glazar

    2017-12-01

    Full Text Available IntroductionLower urinary tract symptoms (LUTS are very common in children. Standard treatments consist of urotherapy, antibiotic prophylaxis, anti-muscarinics, physical therapy, and the treatment of coexisting constipation. A small group of girls also present with stress incontinence or with stress-induced urge incontinence. In cases of persistent LUTS due to congenital bladder neck insufficiency (BNI, surgical treatment might be considered. The aim of this paper is to assess the results of open and laparoscopic colposuspension in children with refractory urinary incontinence (UI.Materials and methodsThe results of 18 open and 18 laparoscopic consecutive colposuspensions were analyzed. All patients had UI and failed conservative treatment. BNI was proven by repeated perineal ultrasound and video-urodynamic study. The laparoscopic procedure was performed preperitoneally and the open procedure was via a transverse lower abdominal incision. The same postoperative protocol was used in both groups.ResultsThe mean operation time was 65 min for the open and 90 min for the lap procedure (p < 0.05. Full success was achieved in 7/18 in the open and in 8/18 in the lap group and partial response was seen in 3/18 and in 5/18, respectively (p = 0.64. No intraoperative complications occurred in this cohort.ConclusionOpen and laparoscopic colposuspension can be used to treat refractory UI in children with BNI when non-invasive methods fail.

  20. Mechanical and Physicochemical Evaluation of Alkaleri Fireclay for Refractory Application

    Directory of Open Access Journals (Sweden)

    Job Ajala Amkpa

    2017-04-01

    Full Text Available The mechanical, chemical and physical property of Alkaleri fireclay was investigated for its appropriateness for refractory application. The chemical composition was performed and analyzed using the X-ray fluorescence (XRF spectrometer Bench top XRF analyzer technique. Chemical property result indicated that the clay contained 67.4 % silica (SiO2, 30.06 % aluminum (Al2O3, and other impurities. The clay was subjected to mechanical activation through sintering process at varied sintering temperatures of 900 °C, 1000 °C, 1100 °C and 1200 °C. At the best sintering temperature of 1200 °C, the cold crushing strength (CCS was 17.82 MPa, in the physical properties; apparent porosity was 22.8 %, bulk density was 1.8 g/cm3, and firing shrinkage was 8.9 %. The Alkaleri clay belongs to alumino-silicate fireclay group and therefore, suitable materials for refractory application of ladle, kiln dryer, boilers, cook stoves, furnace lining and bricks.

  1. Thermodynamics of carbon deoxidation and aluminium deoxidation of refractory metals

    International Nuclear Information System (INIS)

    Garg, S.P.; Sundaram, C.V.

    1975-01-01

    Carbon has been used for removing the last traces of oxygen from many refractory metals by evaporation of CO at high temperature and vacuum. Similar purification can also be achieved employing aluminium deoxidation by evaporation of Al 2 Osub(g). In the present paper a theoretical thermodynamic approach has been attempted to evaluate the deoxidation tendencies of refractory metals of groups IV to VI by these two processes. Expressions have been theoretically derived, relating the concentration product of carbon and oxygen in the metal (which is a measure of the carbon deoxidation tendency of the metal) with temperature and pressure, for various M-C-O systems. Similarly the relative vapour pressure values of Alsub(2)Osub(g),Alsub(g)andMO(g) (suboxide of the metal) over various M-Al-O systems have been calculated as a function of aluminium and oxygen contents of the metal. From these analyses, it has been shown that a substantial amount of oxygen can be removed from M-Al-O alloys by aluminium deoxidation. The estimated values are compared with the reported values based on experiment. (author)

  2. Bevacizumab: an option for refractory epistaxis in hereditary haemorrhagic telangiectasia.

    Science.gov (United States)

    Amann, Arno; Steiner, Normann; Gunsilius, Eberhard

    2015-08-01

    Recurrent epistaxis in hereditary haemorrhagic telangiectasia (HHT) patients significantly decreases their quality of life. Treatment in therapy refractory patients is limited although various options have been tested so far. Herein, one patient is described that was treated for HHT for over 20 years with only intermediate benefits. As epistaxis duration and frequency increased continuously, bevacizumab 5 mg/kg was administered every 2 weeks. During the time of treatment (six doses) and up to 3 month afterwards clinical symptoms, blood pressure, cardiac output, pulmonary arterial hypertension (PAH), bleeding duration and frequency were assessed as criteria for treatment benefit. Duration and frequency of epistaxis decreased immediately after the first application resulting in reduced need of blood transfusions. After completion of six cycles, a further decrease in frequency and duration of bleeding was noted. Cardiac output and PAH decreased or remained stable, respectively, during time and after treatment. No increase in blood pressure could be found but a significant increase in heart rate was experienced after completion of all six applications. Unfortunately, the patient died due to a cerebral abscess. Bevacizumab led to an improvement of HHT related epistaxis, refractory to other treatments.

  3. External bioresorbable airway rigidification to treat refractory localized tracheomalacia.

    Science.gov (United States)

    Gorostidi, François; Reinhard, Antoine; Monnier, Philippe; Sandu, Kishore

    2016-11-01

    Our study evaluates the efficacy of extraluminal bioresorbable plates to treat refractory localized airway malacia in patients undergoing corrective surgery for complex multilevel laryngotracheal stenosis. Retrospective case series. Secondary malacic airway segments were characterized (severity, site, type) by a dynamic transnasal flexible laryngotracheobronchoscopy before surgery. Extraluminal bioresorbable plates were used to stabilize the malacic segment through a transcervical approach under intraoperative flexible endoscopic guidance. Results were evaluated subjectively and by a postoperative dynamic endoscopy. We report our experience in seven patients (6 children, 1 adult). External tracheal stiffening allowed complete or partial resolution of refractory proximal airway malacia in six of seven complex cases described (result in one case is awaited). It allowed quick decannulation in four of seven patients who experienced multiple previous failures. Decannulation failures were due to recurrence of stenosis. With up to 2 years of follow-up, we report no direct complications related to the presence of extraluminal bioresorbable plates around the airway. Extraluminal biodegradable tracheal stiffening represents a valid therapeutic option in select cases of upper airway malacia. It can be highly useful in cases of complex multilevel airway obstructions. External stiffening needs to be planned on a case-to-case basis according to the type of malacia and must be performed under endoscopic guidance. 4. Laryngoscope, 126:2605-2610, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

  4. Atopy: a risk factor of refractory mycoplasma pneumoniae pneumonia?

    Science.gov (United States)

    Bao, Yi-Xiao; Li, Jing; Tian, Ye; Liu, Quang-Hua; Bao, Jun

    2017-11-01

    To investigate the relationship of pathogen DNA copies with clinic and laboratory features among children with Mycoplasma pneumoniae (MP) pneumonia. A total of 95 enrolled children with MP pneumonia were assigned into the high-MP-load group (>10 6 /mL) and the low-MP-load group (≤10 6 /mL) according to MP-DNA copies in bronchoalveolar lavage fluid (BALF). Clinical characteristics and any allergy history were collected. Aeroallergens and food allergens were detected with a skin test. Serum IgE and eosinophil cationic protein (ECP) were assessed using enzyme immunoassay. BALF levels of IL-4, IFN-γ, IL-8 and TNF-α were assessed by ELISA. Compared with the low-MP-load group, 72.7% in the high-MP-load group developed refractory MP pneumonia who failed to respond to at least 1-week treatment with macrolides (72.7% vs 41.9%, P = 0.005). More children in the high-load group than those in the low-load group presented with extrapulmonary manifestations, lung consolidation, pleural effusion and atopic conditions including any allergy history, positive findings of aeroallergen test and increased serum IgE and ECP (P  0.05). Atopy may be a risk factor for the presence and severity of refractory MP pneumonia due to the high pathogen load in airway. © 2016 John Wiley & Sons Ltd.

  5. Synthesis of refractory organic matter in the ionized gas phase of the solar nebula.

    Science.gov (United States)

    Kuga, Maïa; Marty, Bernard; Marrocchi, Yves; Tissandier, Laurent

    2015-06-09

    In the nascent solar system, primitive organic matter was a major contributor of volatile elements to planetary bodies, and could have played a key role in the development of the biosphere. However, the origin of primitive organics is poorly understood. Most scenarios advocate cold synthesis in the interstellar medium or in the outer solar system. Here, we report the synthesis of solid organics under ionizing conditions in a plasma setup from gas mixtures (H2(O)-CO-N2-noble gases) reminiscent of the protosolar nebula composition. Ionization of the gas phase was achieved at temperatures up to 1,000 K. Synthesized solid compounds share chemical and structural features with chondritic organics, and noble gases trapped during the experiments reproduce the elemental and isotopic fractionations observed in primitive organics. These results strongly suggest that both the formation of chondritic refractory organics and the trapping of noble gases took place simultaneously in the ionized areas of the protoplanetary disk, via photon- and/or electron-driven reactions and processing. Thus, synthesis of primitive organics might not have required a cold environment and could have occurred anywhere the disk is ionized, including in its warm regions. This scenario also supports N2 photodissociation as the cause of the large nitrogen isotopic range in the solar system.

  6. The diffusion bonding of silicon carbide and boron carbide using refractory metals

    International Nuclear Information System (INIS)

    Cockeram, B.V.

    1999-01-01

    Joining is an enabling technology for the application of structural ceramics at high temperatures. Metal foil diffusion bonding is a simple process for joining silicon carbide or boron carbide by solid-state, diffusive conversion of the metal foil into carbide and silicide compounds that produce bonding. Metal diffusion bonding trials were performed using thin foils (5 microm to 100 microm) of refractory metals (niobium, titanium, tungsten, and molybdenum) with plates of silicon carbide (both α-SiC and β-SiC) or boron carbide that were lapped flat prior to bonding. The influence of bonding temperature, bonding pressure, and foil thickness on bond quality was determined from metallographic inspection of the bonds. The microstructure and phases in the joint region of the diffusion bonds were evaluated using SEM, microprobe, and AES analysis. The use of molybdenum foil appeared to result in the highest quality bond of the metal foils evaluated for the diffusion bonding of silicon carbide and boron carbide. Bonding pressure appeared to have little influence on bond quality. The use of a thinner metal foil improved the bond quality. The microstructure of the bond region produced with either the α-SiC and β-SiC polytypes were similar

  7. Sub-micrometer refractory carbonaceous particles in the polar stratosphere

    Directory of Open Access Journals (Sweden)

    K. Schütze

    2017-10-01

    Full Text Available Eleven particle samples collected in the polar stratosphere during SOLVE (SAGE III Ozone loss and validation experiment from January until March 2000 were characterized in detail by high-resolution transmission and scanning electron microscopy (TEM/SEM combined with energy-dispersive X-ray microanalysis. A total of 4202 particles (TEM  =  3872; SEM  =  330 were analyzed from these samples, which were collected mostly inside the polar vortex in the altitude range between 17.3 and 19.9 km. Particles that were volatile in the microscope beams contained ammonium sulfates and hydrogen sulfates and dominated the samples. Some particles with diameters ranging from 20 to 830 nm were refractory in the electron beams. Carbonaceous particles containing additional elements to C and O comprised from 72 to 100 % of the refractory particles. The rest were internal mixtures of these materials with sulfates. The median number mixing ratio of the refractory particles, expressed in units of particles per milligram of air, was 1.1 (mg air−1 and varied between 0.65 and 2.3 (mg air−1. Most of the refractory carbonaceous particles are completely amorphous, a few of the particles are partly ordered with a graphene sheet separation distance of 0.37 ± 0.06 nm (mean value ± standard deviation. Carbon and oxygen are the only detected major elements with an atomic O∕C ratio of 0.11 ± 0.07. Minor elements observed include Si, S, Fe, Cr and Ni with the following atomic ratios relative to C: Si∕C: 0.010 ± 0.011; S∕C: 0.0007 ± 0.0015; Fe∕C: 0.0052 ± 0.0074; Cr∕C: 0.0012 ± 0.0017; Ni∕C: 0.0006 ± 0.0011 (all mean values ± standard deviation.High-resolution element distribution images reveal that the minor elements are distributed within the carbonaceous matrix; i.e., heterogeneous inclusions are not observed. No difference in size, nanostructure and elemental composition was found between

  8. Rapid pacing results in changes in atrial but not in ventricular refractoriness

    NARCIS (Netherlands)

    Schoonderwoerd, BA; Van Gelder, IC; Tieleman, RG; Bel, KJ; Crijns, HJGM

    It is well known that atrial tachycardia causes atrial electrical remodeling, characterized by shortening of atrial effective refractory periods (AERPs) and loss of physiological adaptation of AERP to rate. However, the nature and time course of changes in ventricular effective refractory periods

  9. Iron Refractory Iron Deficiency Anaemia: A Rare Cause of Iron Deficiency Anaemia

    LENUS (Irish Health Repository)

    McGrath, T

    2018-01-01

    We describe the case of a 17-month-old boy with a hypochromic microcytic anaemia, refractory to oral iron treatment. After exclusion of dietary and gastrointestinal causes of iron deficiency, a genetic cause for iron deficiency was confirmed by finding two mutations in the TMPRSS6 gene, consistent with a diagnosis of iron-refractory iron deficiency anaemia (IRIDA).

  10. RESULTS OF OUTPATIENT PROGRAM ON EFFECTIVE THERAPY OF REFRACTORY ARTERIAL HYPERTENSION

    Directory of Open Access Journals (Sweden)

    M. M. Batyushin

    2015-12-01

    Full Text Available Aim. To increase in efficacy of antihypertensive therapy in patients with refractory arterial hypertension (HT.Material and methods. Patients with refractory HT were revealed during first month of program. The causes of refractory HT were analyzed. Combined antihypertensive therapy was prescribed to reach target level of blood pressure (BP. This therapy lasted 24 weeks and included angiotensin converting enzyme (ACE inhibitor, thiazid diuretic (indapamide and dihydropyridine calcium antagonist (nifedipine XL.Results. 200 patients with refractory HT were revealed. True refractory HT took place in 59,9% of patients and pseudo refractory HT – in 40,1% of patients. Lack of diuretics or combined antihypertensive therapy were the main reason of insufficient BP control. Proposed 3-drugs therapy resulted in reduction of systolic BP from 190 to 132 Hg mm and diastolic BP from 104 to 81 Hg mm. Target level of BP was reached in 94% patients. There were no side effects which demanded to stop therapy.Conclusion. High incidence of pseudorefractory HT (40,1% is revealed. Significant prevalence of renal disturbances especially chronic interstitial inflammatory could be responsible for refractory HT development. Use of 3-drugs therapy (ACE inhibitor, indapamide and nifedipine XL provides effective control of BP in refractory and pseudorefractory HT.

  11. Development of electro fused aggregates for use in refractories for the burning zone of cement kilns

    International Nuclear Information System (INIS)

    Ferreira, Luis Leonardo Horne Curimbaba

    2006-01-01

    Electro fused aggregates are largely used in refractory production due to the better performance reached when they are employed. In this work electro fused aggregates were designed for application in refractories for the burning zone of cement kilns. Initially reaction evaluation was conducted aiming the identification of the most prone refractory systems when single refractory phases react with Portland cement phases at high temperatures. In the next step, raw materials of the best refractory systems were electro fused to generate different aggregate compositions. The electro fused aggregates properties were evaluated and the classified ones were used to produce refractory bricks for the burning zone of cement kilns. General characteristics of these bricks were measured and compared with a standard magnesia-spinel refractory. Aggregates of the system Mg O - TiO 2 - Ca O, more specifically aggregates belonged to the compatibility triangle Mg O - Mg 2 TiO 4 - CaTiO 3 , showed suitable characteristics for development of refractories for the burning zone cement kilns. (author)

  12. A randomized controlled trial of the ketogenic diet in refractory childhood epilepsy

    NARCIS (Netherlands)

    Lambrechts, D.A.J.E.; de Kinderen, R.J.A.; Vles, J.S.H.; de Louw, A.J.A.; Aldenkamp, A.P.; Majoie, H.J.M.

    2017-01-01

    Objective: To evaluate the efficacy and tolerability of the ketogenic diet (KD) during the first 4 months of a randomized controlled trial (RCT) in refractory epilepsy patients aged 1–18 years. Methods: Children and adolescents with refractory epilepsy, not eligible for epilepsy surgery, were

  13. Antipsychotic Polypharmacy in a Treatment-Refractory Schizophrenia Population Receiving Adjunctive Treatment With Electroconvulsive Therapy

    DEFF Research Database (Denmark)

    Kristensen, Diana; Hageman, Ida; Bauer, Jeanett

    2013-01-01

    Antipsychotic polypharmacy (APP) is frequent, but its pattern is unknown in treatment-refractory schizophrenia-spectrum patients receiving electroconvulsive therapy (ECT).......Antipsychotic polypharmacy (APP) is frequent, but its pattern is unknown in treatment-refractory schizophrenia-spectrum patients receiving electroconvulsive therapy (ECT)....

  14. RESULTS OF OUTPATIENT PROGRAM ON EFFECTIVE THERAPY OF REFRACTORY ARTERIAL HYPERTENSION

    Directory of Open Access Journals (Sweden)

    M. M. Batyushin

    2007-01-01

    Full Text Available Aim. To increase in efficacy of antihypertensive therapy in patients with refractory arterial hypertension (HT.Material and methods. Patients with refractory HT were revealed during first month of program. The causes of refractory HT were analyzed. Combined antihypertensive therapy was prescribed to reach target level of blood pressure (BP. This therapy lasted 24 weeks and included angiotensin converting enzyme (ACE inhibitor, thiazid diuretic (indapamide and dihydropyridine calcium antagonist (nifedipine XL.Results. 200 patients with refractory HT were revealed. True refractory HT took place in 59,9% of patients and pseudo refractory HT – in 40,1% of patients. Lack of diuretics or combined antihypertensive therapy were the main reason of insufficient BP control. Proposed 3-drugs therapy resulted in reduction of systolic BP from 190 to 132 Hg mm and diastolic BP from 104 to 81 Hg mm. Target level of BP was reached in 94% patients. There were no side effects which demanded to stop therapy.Conclusion. High incidence of pseudorefractory HT (40,1% is revealed. Significant prevalence of renal disturbances especially chronic interstitial inflammatory could be responsible for refractory HT development. Use of 3-drugs therapy (ACE inhibitor, indapamide and nifedipine XL provides effective control of BP in refractory and pseudorefractory HT.

  15. Genetics of refractoriness to Plasmodium falciparum in the mosquito Anopheles stephensi

    NARCIS (Netherlands)

    Feldmann, A.M.; Gemert, Geert-Jan van; Vegte-Bolmer, Marga G. van de; Jansen, Ritsert C.

    1998-01-01

    We previously selected a line of the malaria vector mosquito Anopheles stephensi refractory (resistant) to the human malaria parasite Plasmodium falciparum, using in vitro infections with P. falciparum gametocytes. This report presents data on the genetic background of refractoriness. The results of

  16. Ten patients with refractory status epilepticus in an intensive care department

    NARCIS (Netherlands)

    ter Maaten, JC; van Schijndel, RJM; Heimans, JJ; Schreuder, WO

    1998-01-01

    Status epilepticus (SE) is a serious disease, associated with a high morbidity and mortality, particularly if refractory to initial therapy. We describe the clinical manifestations and outcome in ten cases with refractory SE admitted to our medical intensive care unit. Three of these selected group

  17. Defining refractory migraine: results of the RHSIS Survey of American Headache Society members.

    Science.gov (United States)

    Schulman, Elliott A; Peterlin, B Lee; Lake, Alvin E; Lipton, Richard B; Hanlon, Alexandra; Siegel, Sherry; Levin, Morris; Goadsby, Peter J; Markley, Herbert G

    2009-04-01

    To gauge consensus regarding a proposed definition for refractory migraine proposed by Refractory Headache Special Interest Section, and where its use would be most appropriate. Headache experts have long recognized that a subgroup of headache sufferers remains refractory to treatment. Although different groups have proposed criteria to define refractory migraine, the definition remains controversial. The Refractory Headache Special Interest Section of the American Headache Society developed a definition through a consensus process, assisted by a literature review and initial membership survey. A 12-item questionnaire was distributed at the American Headache Society meeting in 2007 during a platform session and at the Refractory Headache Special Interest Section symposium. The same questionnaire was subsequently sent to all American Headache Society members via e-mail. A total of 151 responses from AHS members form the basis of this report. The survey instrument was designed using Survey Monkey. Frequencies and percentages of the survey were used to describe survey responses. American Headache Society members agreed that a definition for refractory migraine is needed (91%) that it should be added to the International Classification of Headache Disorders-2 (86%), and that refractory forms of non-migraine headache disorders should be defined (87%). Responders believed a refractory migraine definition would be of greatest value in selecting patients for clinical drug trials. The current refractory migraine definition requires a diagnosis of migraine, interference with function or quality of life despite modification of lifestyle factors, and adequate trials of acute and preventive medicines with established efficacy. The proposed criteria for the refractory migraine definition require failing 2 preventive medications to meet the threshold for failure. Although 42% of respondents agreed with the working definition of refractory migraine, 43% favored increasing the

  18. Importance of elastic finite-size effects: Neutral defects in ionic compounds

    Science.gov (United States)

    Burr, P. A.; Cooper, M. W. D.

    2017-09-01

    Small system sizes are a well-known source of error in density functional theory (DFT) calculations, yet computational constraints frequently dictate the use of small supercells, often as small as 96 atoms in oxides and compound semiconductors. In ionic compounds, electrostatic finite-size effects have been well characterized, but self-interaction of charge-neutral defects is often discounted or assumed to follow an asymptotic behavior and thus easily corrected with linear elastic theory. Here we show that elastic effects are also important in the description of defects in ionic compounds and can lead to qualitatively incorrect conclusions if inadequately small supercells are used; moreover, the spurious self-interaction does not follow the behavior predicted by linear elastic theory. Considering the exemplar cases of metal oxides with fluorite structure, we show that numerous previous studies, employing 96-atom supercells, misidentify the ground-state structure of (charge-neutral) Schottky defects. We show that the error is eliminated by employing larger cells (324, 768, and 1500 atoms), and careful analysis determines that elastic, not electrostatic, effects are responsible. The spurious self-interaction was also observed in nonoxide ionic compounds irrespective of the computational method used, thereby resolving long-standing discrepancies between DFT and force-field methods, previously attributed to the level of theory. The surprising magnitude of the elastic effects is a cautionary tale for defect calculations in ionic materials, particularly when employing computationally expensive methods (e.g., hybrid functionals) or when modeling large defect clusters. We propose two computationally practicable methods to test the magnitude of the elastic self-interaction in any ionic system. In commonly studied oxides, where electrostatic effects would be expected to be dominant, it is the elastic effects that dictate the need for larger supercells: greater than 96 atoms.

  19. Comparison of Refractory Performance in Black Liquor Gasifiers and a Smelt Test System

    International Nuclear Information System (INIS)

    Peascoe, RA

    2001-01-01

    Prior laboratory corrosion studies along with experience at the black liquor gasifier in New Bern, North Carolina, clearly demonstrate that serious material problems exist with the gasifier's refractory lining. Mullite-based and alumina-based refractories used at the New Bern facility suffered significant degradation even though they reportedly performed adequately in smaller scale systems. Oak Ridge National Laboratory's involvement in the failure analysis, and the initial exploration of suitable replacement materials, led to the realization that a simple and reliable, complementary method for refractory screening was needed. The development of a laboratory test system and its suitability for simulating the environment of black liquor gasifiers was undertaken. Identification and characterization of corrosion products were used to evaluate the test system as a rapid screening tool for refractory performance and as a predictor of refractory lifetime. Results from the test systems and pl ants were qualitatively similar

  20. Tocilizumab treatment for refractory uveitis-related cystoid macular edema.

    Science.gov (United States)

    Adán, Alfredo; Mesquida, Marina; Llorenç, Victor; Espinosa, Gerard; Molins, Blanca; Hernández, Maria V; Pelegrín, Laura

    2013-11-01

    This retrospective study investigated the efficacy of tocilizumab (TCZ), a fully humanized antibody that binds both to soluble and membrane bound IL-6 receptors, for the treatment of uveitis-related cystoid macular edema (CME) refractory to immunomodulatory therapy. Five refractory patients with uveitis-related CME who received TCZ between January and August 2012 were included. All patients received 8 mg/kg TCZ at 4-week intervals. Data regarding patient demographics, use of immunosuppressive drugs, biologic agents or intravitreal therapies prior to TCZ infusions were collected. Main outcome measure was central foveal thickness (CFT) measured by optical coherence tomography at 6 months. Secondary outcome measures were degree of anterior and posterior chamber inflammation (Standardization of Uveitis Nomenclature Working Group criteria) and visual acuity (logarithm of the minimum angle of resolution [log-MAR]) at month 6. Adverse events (AEs) related to TCZ therapy were also assessed. Eight eyes from five patients (all females) were included. Mean age was 49.4 years (range, 30-68). Mean follow-up was 8.4 months (range, 6-12). Before TCZ, all patients received and failed conventional immunosuppressive therapy and had received at least another biologic agent. Uveitis diagnoses were Birdshot chorioretinopathy (n = 3), juvenile idiopathic arthritis (JIA)-associated uveitis (n = 1), and idiopathic panuveitis (n = 1). Mean evolution of CME was 13.4 years (range, 2-30). Mean baseline CFT (95% confidence interval) was 602 ± 236 μm at baseline, 386 ± 113 μm at month 1 (p = 0.006), 323 ± 103 μm at month 3 (p = 0.026), and 294.5 ± 94.5 μm at month 6 (p = 0.014). Median best-corrected visual acuity (BCVA) improved from 0.66 ± 0.57 at baseline to 0.47 ± 0.62 at month 6 (p = 0.035). After 6 months, an improvement of ≥ 2 lines of BCVA was observed in 50% of eyes (p = 0.028) remained stable in 25% and worsened in none of the patients. Sustained uveitis remission was

  1. Meta-analysis of adjunctive levetiracetam in refractory partial sei

    Directory of Open Access Journals (Sweden)

    ZHANG Ying

    2012-10-01

    Full Text Available Objective To evaluate the effects and tolerability of adjunctive levetiracetam (LEV in refractory partial seizures. Methods Relevant research articles about randomized controlled trials of adjunctive LEV in refractory partial seizures from January 1998 to December 2010 were retrieved from Cochrane Library, MEDLINE, EMbase, Social Sciences Citation Index (SSCI, VIP, Chinese National Knowledge Infrastructure (CNKI database, China Biology Medicine (CBM. Two reviewers independently evaluated the quality of the included articles and abstracted the data. A Meta-analysis was conducted by using RevMan 5.0 software. Results According to the enrollment criteria, eleven prospective, randomized controlled clinical trials with a total of 1192 in LEV group and 789 in placebo group were finally selected. The reduction in three endpoints (a 50% or greater reduction of partial seizure frequency per week, a 75% or greater reduction of partial seizure frequency per week and seizure free was significant in LEV group than placebo group. There was no significance between LEV group and placebo group in the withdrawl rate (1000 mg/d: OR = 1.180, 95%CI: 0.690-2.010, P = 0.540; 2000 mg/d: OR = 1.530, 95%CI: 0.770-3.030, P = 0.230; 3000 mg/d: OR = 1.000, 95% CI: 0.620-1.600, P = 1.000. The following adverse events were associated with LEV: somnolence (OR = 1.720, 95%CI: 1.280-2.310, P = 0.000, dizziness (OR = 1.490, 95%CI: 1.000-2.220, P = 0.050, asthenia (OR = 1.670, 95%CI: 1.140-2.240, P = 0.008, nasopharyngitis (OR = 1.120, 95% CI: 0.710-1.760, P = 0.630, psychiatric and behavioral abnormalities (OR = 2.120, 95% CI: 1.370-3.280, P = 0.000. Conclusion LEV is effective and well tolerated when added to existing therapy in patients with refractory partial seizures compared with control drugs. Further studies are needed to identify the effects of monotherapy of LEV in partial seizures.

  2. Developing the Pediatric Refractory Epilepsy Questionnaire: a pilot study.

    Science.gov (United States)

    Purusothaman, Vaishnavi; Ryther, Robin C C; Bertrand, Mary; Harker, Lisa A; Jeffe, Donna B; Wallendorf, Michael; Smyth, Matthew D; Limbrick, David D

    2014-08-01

    Up to 14% of children with epilepsy continue to experience seizures despite having appropriate medical therapy and develop medically refractory epilepsy (MRE). Assessing clinical outcomes and therapeutic efficacy in children with MRE undergoing palliative epilepsy surgery has been challenging because of the lack of a quantitative instrument capable of estimating the clinical status of these patients. The ideal instrument would at once consider seizure control, neurodevelopment, caregiver burden, and quality of life. The purpose of this study was to develop and pilot the Pediatric Refractory Epilepsy Questionnaire (PREQ), a quantitative instrument to assess the severity and individual burden of epilepsy in children with MRE undergoing palliative epilepsy treatments. The caregivers of 25 patients with MRE completed the PREQ and the Quality of Life in Childhood Epilepsy (QOLCE) measure and participated in a semistructured interview. Medical records of the patients were reviewed, an Early Childhood Epilepsy Severity Scale (E-CHESS) score was calculated, and a Global Assessment of Severity of Epilepsy (GASE) score was obtained for each patient. The initial PREQ was modified based on the analysis of responses, association with previously validated scales, comments from caregivers, and expertise of the PREQ panelists. Pediatric Refractory Epilepsy Questionnaire subscale scores were calculated based on clinical paradigm and compared with independent measures of seizure severity and quality of life. Significant correlations were observed between the seizure severity subscale and the GASE score (r=0.55) and between the mood subscale and the well-being score (r=0.61) on the QOLCE. Significant correlations were also observed between the caregiver rating of seizure severity and the GASE score (r=0.53), the social activity score (r=0.57), and the behavior score (r=0.43) on the QOLCE. Correlations between the caregiver rating of quality of life and the quality of life score (r=0

  3. Steam explosion studies with single drops of molten refractory materials

    International Nuclear Information System (INIS)

    Nelson, L.S.

    1980-01-01

    Laser heating, levitation melting, and metal combustion were used to prepare individual drops of molten refractory materials which simulate LWR fuel melt products. Drop temperatures ranged from approx. = 1500 to > 3000K. These drops, several millimeters in diameter, were injected into water and subjected to pressure transients (approx. = 1MPa peak pressures) generated by a submerged exploding bridgewire. Molten oxides of Fe, Al and Zr could be induced to explode with bridgewire initiation. High speed films showed the explosions with exceptional clarity, and pressure transducer records could be correlated with individual frames in the films. Pressure spikes one or two MPa high were generated whenever an explosion occurred. Debris particles were mostly spheroidal, with diameters in the range 10 to 1000 μm

  4. Treatment-refractory anxiety; definition, risk factors, and treatment challenges

    Science.gov (United States)

    Roy-Byrne, Peter

    2015-01-01

    A sizable proportion of psychiatric patients will seek clinical evaluation and treatment for anxiety symptoms reportedly refractory to treatment. This apparent lack of response is either due to “pseudo-resistance” (a failure to have received and adhered to a recognized and effective treatment or treatments for their condition) or to true “treatment resistance.” Pseudo-resistance can be due to clinician errors in selecting and delivering an appropriate treatment effectively, or to patient nonadherence to a course of treatment. True treatment resistance can be due to unrecognized exogenous anxiogenic factors (eg, caffeine overuse, sleep deprivation, use of alcohol or marijuana) or an incorrect diagnosis (eg, atypical bipolar illness, occult substance abuse, attention deficit-hyperactivity disorder). Once the above factors are eliminated, treatment should focus on combining effective medications and cognitive behavioral therapy, combining several medications (augmentation), or employing novel medications or psychotherapies not typically indicated as first-line evidence-based anxiety treatments. PMID:26246793

  5. Low-dose aripiprazole for refractory burning mouth syndrome.

    Science.gov (United States)

    Umezaki, Yojiro; Takenoshita, Miho; Toyofuku, Akira

    2016-01-01

    We report a case of refractory burning mouth syndrome (BMS) ameliorated with low dose of aripiprazole. The patient was a 66-year-old female who had suffered from chronic burning pain in her tongue for 13 months. No abnormality associated with the burning sensation was detected in the laboratory tests and the oral findings. Considering the clinical feature and the history together, we diagnosed the burning sensation as BMS. The BMS pain was decreased by aripiprazole (powder) 1.0 mg/d, though no other antidepressants had satisfying pain relief. It could be supposed that the efficacy of aripiprazole is caused by dopamine stabilization in this case, and BMS might have a subtype that is reactive to aripiprazole. Further studies are needed to confirm the efficacy of aripiprazole for BMS.

  6. Rivastigmine for refractory REM behavior disorder in mild cognitive impairment.

    Science.gov (United States)

    Brunetti, Valerio; Losurdo, Anna; Testani, Elisa; Lapenta, Leonardo; Mariotti, Paolo; Marra, Camillo; Rossini, Paolo Maria; Della Marca, Giacomo

    2014-03-01

    Mild Cognitive Impairment (MCI) and REM Behavior Disorder (RBD) are both associated with a degeneration of ponto-medullary cholinergic pathways. We conducted a placebo-controlled, cross-over pilot trial of Rivastigmine (RVT) in 25 consecutive patients with MCI, who presented RBD refractory to conventional first-line treatments (melatonin up to 5 mg/day and clonazepam up to 2 mg/day). RVT treatment was followed by a significant reduction of RBD episodes when compared with placebo. Our data suggest that, in MCI patients with RBD resistant to conventional therapies (muscle relaxants benzodiazepines or melatonin,) treatment with RVT may induce a reduction in the frequency of RBD episodes compared to placebo.

  7. Refractory metal alloys and composites for space power systems

    International Nuclear Information System (INIS)

    Stephens, J.R.; Petrasek, D.W.; Titran, R.H.

    1994-01-01

    Space power requirements for future NASA and other United States missions will range from a few kilowatts to megawatts of electricity. Maximum efficiency is a key goal of any power system in order to minimize weight and size so that the space shuttle may be used a minimum number of times to put the power supply into orbit. Nuclear power has been identified as the primary power source to meet these high levels of electrical demand. One method to achieve maximum efficiency is to operate the power supply, energy conversion system, and related components at relatively high temperatures. NASA Lewis Research Center has undertaken a research program on advanced technology of refractory metal alloys and composites that will provide base line information for space power systems in the 1900's and the 21st century. Basic research on the tensile and creep properties of fibers, matrices, and composites will be discussed

  8. Refractory Hyperlactatemia with Organ Insufficiency in Lipid Storage Myopathy.

    Science.gov (United States)

    Xu, Yuanda; Zhou, Li; Liang, Weibo; He, Weiqun; Liu, Xiaoqing; Liang, Xiuling; Zhong, Nanshan; Li, Yimin

    2015-08-01

    Lipid storage myopathy is a metabolic disorder characterized by abnormal lipid accumulation in muscle fibers and progressive muscle weakness. Here, we report the case of a 17-year-old woman with progressive muscle weakness, refractory hyperlactatemia, and multiple organ insufficiency. Severe pneumonia was the initial diagnosis. After anti-infective treatment, fluid resuscitation, and mechanical ventilation, the patient's symptoms improved but hyperlactatemia and muscle weakness persisted. She was empirically treated with carnitine. Biochemical tests, electromyography, and muscle biopsy confirmed lipid storage myopathy. After 7 weeks of treatment, the patient resumed normal daily life. An empirical treatment with carnitine may be beneficial for patients before an accurate diagnosis of lipid storage myopathy is made.

  9. Supra-recommendation Treatment of Super-refractory Status Epilepticus.

    Science.gov (United States)

    Vyas, Devashish Dhiren; Dash, Gopal Krishna

    2016-06-01

    A 28-year old female was admitted with recurrent seizures following 2 days of febrile illness, after which she developed status epilepticus. Midazolam and later thiopentone infusions were started after failure of regular intravenous antiepileptics. Burst suppression was achieved at doses of 3 mg/kg/hr for midazolam and 6 mg/kg/hr of thiopentone. Adjunctive medications included methylprednisolone, intravenous immunoglobulin and acyclovir. Imaging and biochemical parameters were normal. She required 3 cycles of midazolam and 2 cycles of thiopentone for complete cessation of seizures. She recovered with mild attentional and recent memory deficits on follow up. Treatment of super-refractory status epilepticus requires individualized regimens and may need doses beyond conventional limits. To the best of our knowledge, there is no such reported case from India.

  10. Treatment-refractory anxiety; definition, risk factors, and treatment challenges.

    Science.gov (United States)

    Roy-Byrne, Peter

    2015-06-01

    A sizable proportion of psychiatric patients will seek clinical evaluation and treatment for anxiety symptoms reportedly refractory to treatment. This apparent lack of response is either due to "pseudo-resistance" (a failure to have received and adhered to a recognized and effective treatment or treatments for their condition) or to true "treatment resistance." Pseudo-resistance can be due to clinician errors in selecting and delivering an appropriate treatment effectively, or to patient nonadherence to a course of treatment. True treatment resistance can be due to unrecognized exogenous anxiogenic factors (eg, caffeine overuse, sleep deprivation, use of alcohol or marijuana) or an incorrect diagnosis (eg, atypical bipolar illness, occult substance abuse, attention deficit-hyperactivity disorder). Once the above factors are eliminated, treatment should focus on combining effective medications and cognitive behavioral therapy, combining several medications (augmentation), or employing novel medications or psychotherapies not typically indicated as first-line evidence-based anxiety treatments.

  11. Neurobiochemical mechanisms of a ketogenic diet in refractory epilepsy

    Directory of Open Access Journals (Sweden)

    Patricia Azevedo de Lima

    2014-12-01

    Full Text Available A ketogenic diet is an important therapy used in the control of drug-refractory seizures. Many studies have shown that children and adolescents following ketogenic diets exhibit an over 50% reduction in seizure frequency, which is considered to be clinically relevant. These benefits are based on a diet containing high fat (approximately 90% fat for 24 months. This dietary model was proposed in the 1920s and has produced variable clinical responses. Previous studies have shown that the mechanisms underlying seizure control involve ketone bodies, which are produced by fatty acid oxidation. Although the pathways involved in the ketogenic diet are not entirely clear, the main effects of the production of ketone bodies appear to be neurotransmitter modulation and antioxidant effects on the brain. This review highlights the impacts of the ketogenic diet on the modulation of neurotransmitters, levels of biogenic monoamines and protective antioxidant mechanisms of neurons. In addition, future perspectives are proposed.

  12. Assessment and management of refractory breathlessness in interstitial lung disease.

    Science.gov (United States)

    Speakman, Lucy; Walthall, Helen

    2017-09-02

    Interstitial lung disease (ILD) refers to a cluster of fibroinflammatory conditions. There are limited treatment options and most patients have severe dyspnoea. The prognosis is poor. This study aims to evaluate current literature on the assessment and management of refractory breathlessness in ILD. Few tools are available to assess dyspnoea in advanced respiratory disease. Holistic assessment requires a combination of tools but there are few disease specific tools. The role of opioids is well established in the reduction of breathlessness, but there is insufficient evidence that benzodiazepines are beneficial. Non-pharmcolological breathlessness intervention services can give patients mastery of their disease, reduced distress due to breathlessness and were more cost effective. More research on holistic interventions for use in advanced disease needs to be done. Patient-reported outcome measures could elicit valuable evidence to describe the benefit of breathlessness management services in advanced respiratory disease.

  13. MDX-010 in Treating Patients With Recurrent or Refractory Lymphoma

    Science.gov (United States)

    2014-05-22

    Adult Grade III Lymphomatoid Granulomatosis; B-cell Chronic Lymphocytic Leukemia; Cutaneous B-cell Non-Hodgkin Lymphoma; Extranodal Marginal Zone B-cell Lymphoma of Mucosa-associated Lymphoid Tissue; Intraocular Lymphoma; Nodal Marginal Zone B-cell Lymphoma; Recurrent Adult Burkitt Lymphoma; Recurrent Adult Diffuse Large Cell Lymphoma; Recurrent Adult Diffuse Mixed Cell Lymphoma; Recurrent Adult Diffuse Small Cleaved Cell Lymphoma; Recurrent Adult Grade III Lymphomatoid Granulomatosis; Recurrent Adult Hodgkin Lymphoma; Recurrent Adult Immunoblastic Large Cell Lymphoma; Recurrent Adult Lymphoblastic Lymphoma; Recurrent Grade 1 Follicular Lymphoma; Recurrent Grade 2 Follicular Lymphoma; Recurrent Mantle Cell Lymphoma; Recurrent Marginal Zone Lymphoma; Refractory Hairy Cell Leukemia; Small Intestine Lymphoma; Splenic Marginal Zone Lymphoma; Testicular Lymphoma; Waldenström Macroglobulinemia

  14. Epidural blood patch for refractory low CSF pressure headache

    DEFF Research Database (Denmark)

    Madsen, Søren Aalbæk; Fomsgaard, Jonna Storm; Jensen, Rigmor

    2011-01-01

    primary effect parameter was total headache burden defined as area under the curve (AUC: intensity × duration) and as secondary effect parameters we identified: intensity (VAS 0-10), frequency (days per month), duration in hours (total hours/month) and also medication days (days on medication...... of non-invasive/conservative measures and invasive measures with epidural blood patch providing the cornerstone of the invasive measures. In the present pilot study we therefore aimed to evaluate the treatment efficacy of epidural blood patch (EBP) in treatment-refractory low-pressure headache. Our......Once believed an exceedingly rare disorder, recent evidence suggests that low cerebrospinal fluid (CSF) pressure headache has to be considered an important cause of new daily persistent headaches, particularly among young and middle-aged individuals. Treatment of low CSF pressure headache consists...

  15. Epidural blood patch for refractory low CSF pressure headache

    DEFF Research Database (Denmark)

    Madsen, Søren Aalbæk; Fomsgaard, Jonna Storm; Jensen, Rigmor

    2011-01-01

    of non-invasive/conservative measures and invasive measures with epidural blood patch providing the cornerstone of the invasive measures. In the present pilot study we therefore aimed to evaluate the treatment efficacy of epidural blood patch (EBP) in treatment-refractory low-pressure headache. Our......Once believed an exceedingly rare disorder, recent evidence suggests that low cerebrospinal fluid (CSF) pressure headache has to be considered an important cause of new daily persistent headaches, particularly among young and middle-aged individuals. Treatment of low CSF pressure headache consists...... primary effect parameter was total headache burden defined as area under the curve (AUC: intensity × duration) and as secondary effect parameters we identified: intensity (VAS 0-10), frequency (days per month), duration in hours (total hours/month) and also medication days (days on medication...

  16. Study of Refractory Status Epilepticus from a Tertiary Care Center.

    Science.gov (United States)

    Kohli, Sahil; Pasangulapati, Suresh Babu; Yoganathan, Sangeetha; Rynjah, Gideon Lyngsyun; Prabhakar, A T; Aaron, Sanjith; Alexander, Mathew; Mathew, Vivek

    2017-01-01

    To determine the proportion of refractory status epilepticus (RSE) and super-RSE (SRSE) among patients with status epilepticus (SE) and to analyze RSE and non-RSE (NRSE) in terms of etiology and predictors for RSE. Patients were identified from discharge summaries database with keywords of SE and records of the portable electroencephalogram (EEG) machine from January 2011 to March 2016. Two hundred and eighteen events were included in the study with 114 (52.3%) males, bimodal age preponderance age status epilepticus severity score (STESS) was predictive for RSE ( P = 0.001). On multivariate analysis, de novo seizures ( P = 0.009) and abnormal EEG at admission ( P = 0.03) were predictive for RSE. Fifty patients had RSE (22.9%), of which 17 went on to become SRSE (7.8%). Unfavorable STESS score was predictive for RSE on bivariate analysis. On multivariate analysis, de novo seizures and abnormal initial EEG were predictors of RSE.

  17. Radiation treatment of refractory substances in wastewater for recycling water

    International Nuclear Information System (INIS)

    Sekiguchi, Masayuki; Tanabe, Hiroko; Sawai, Teruko

    1997-01-01

    The refractory substances such as molasses pigments and lignin in sewage interfere with recycle system from the secondary effluents from sewage sludge plants, so we investigated the effects of radiation treatment on these substances in sewage. The dialyzed molasses pigments in the wastewater, discharged from baker's yeast factory were easily decomposed and decolorized. When the artificial sewage sample, containing lignin, fumic acid and tannic acid, was irradiated with gamma rays, the TOC was reduced to one-half of its initial value at 10 kGy, and then the pH dropped to near the minimum value. On the other hand, the pH and TOC of sewage influent sample were little affected by gamma ray irradiation. However, the increases of organic acid formation by gamma rays irradiation were observed for both samples: oxalic acid for the artificial sewage sample, and the formic acid and lactic acid for sewage influent sample were produced at lower absorbed doses, respectively. (author)

  18. Refractory epilepsy and basal ganglia: the role of seizure frequency

    Energy Technology Data Exchange (ETDEWEB)

    Bouilleret, V.; Trebossen, R.; Mantzerides, M.; Semah, F.; Ribeiro, M.J. [Service Hospitalier Frederic Joliot, I2BM/DSV, CEA, 91 - Orsay (France); Bouilleret, V. [CHU Bicetre, Unite de Neurophysiologie et d' Epileptologie, AP-HP, 75 - Paris (France); Chassoux, F. [Hopital Saint Anne, Service de Neurochirurgie, 75 - Paris (France); Biraben, A. [CHU, Service de Neurologie, Hopital Pontchaillou, 35 - Rennes (France)

    2008-02-15

    Objectives. - A decrease of [{sup 18}F]Fluoro-L-DOPA uptake in basal ganglia (B.G.) was recently reported in medically refractory epilepsy. The purpose of this study was to assess the involvement of dopaminergic neurotransmission in refractory Temporal Lobe Epilepsy (T.L.E.) and its relationship to glucose metabolism and morphological changes. Methods. - Twelve T.L.E. patients were studied using [{sup 18}F]FDG PET, [{sup 18}F]Fluoro-L-DOPA PET and MRI and compared with healthy control volunteers. Morphological cerebral changes were assessed using Voxel-Based Morphometry (V.B.M.). Student t test statistical maps of functional and morphological differences between patients and controls were obtained using a general linear model. Results. - In T.L.E. patients, [{sup 18}F]Fluoro-L-DOPA uptake was reduced to the same extent in caudate and putamen in both cerebral hemispheres as well as in the substantia nigra (S.N.). These dopaminergic functional alterations occurred without any glucose metabolism changes in these areas. The only mild morphological abnormality was found in striatal regions without any changes in the S.N.. Conclusion. - The present study provides support for dopaminergic neurotransmission involvement in T.L.E.. The discrepancies between G.M.V. atrophy and the pattern of [{sup 18}F]Fluoro-L-DOPA suggest that B.G. involvement is not related to structural subcortical abnormalities. A functional decrease can be ruled out as there was no change of the glycolytic pathway metabolism in these areas. (authors)

  19. Oxcarbazepine for refractory epilepsy: systematic review of the literature.

    Science.gov (United States)

    Saconato, Humberto; Prado, Gilmar Fernandes do; Puga, Maria Eduarda dos Santos; Atallah, Alvaro Nagib

    2009-01-01

    It has been estimated that 50 million people worldwide suffer from epilepsy and around 30% will not achieve adequate control over the disease. The aim was to evaluate the effectiveness of oxcarbazepine for refractory partial or generalized epilepsy. Systematic review. A search was conducted in the PubMed, Lilacs, EMBASE and CENTRAL databases. Studies were analyzed using the Cochrane Collaboration methodology. Four randomized clinical trials of medium to poor methodological quality were included. Among the adult patients, the chances that they would obtain a 50% reduction in seizure frequency were greater after using oxcarbazepine at doses of 600 mg (relative risk, RR 2.11; 95% confidence interval, CI 1.32 to 3.35), 1,200 mg (RR 3.24; 95% CI 2.11 to 4.98) and 2,400 mg (RR 3.83; 95% CI 2.59 to 5.97). Among the children, the response in the group using oxcarbazepine was also greater (RR 2.11; 95% CI 1.32 to 3.35). The oxcarbazepine doses of 1,200 mg (RR 17.59; 95% CI 2.37 to 130.35) and 2,400 mg (RR 25.41; 95% CI 6.26 to 103.10) were effective for keeping patients probably free from seizures, but the dose of 600 mg was not. There was no significant difference between oxcarbazepine and carbamazepine for controlling the crises. There is moderate evidence indicating that oxcarbazepine is effective as an alternative treatment for partial or generalized epilepsy in children and adults who were refractory to previous treatment.

  20. Granisetron transdermal system improves refractory nausea and vomiting in gastroparesis.

    Science.gov (United States)

    Simmons, Kellie; Parkman, Henry P

    2014-06-01

    Symptoms of gastroparesis include nausea and vomiting, which can markedly diminish quality of life. Nausea and vomiting can also make treatment with oral antiemetics problematic. Our aim was to determine whether treatment-resistant nausea and vomiting in patients with gastroparesis improve after granisetron transdermal patch (GTP) therapy. In an open-label pilot study, patients with gastroparesis and symptoms of nausea and vomiting refractory to conventional treatment were treated with GTP. After 2 weeks, patients were asked to assess their therapeutic response using the Clinical Patient Grading Assessment Scale (CPGAS; +7 = completely better; 0 = no change; -7 = very considerably worse). Responders were defined as CPGAS score >0, non-responders as ≤0. Patients (n = 36) were treated with GTP. Of these 36 patients, one patient discontinued treatment due to the GTP not adhering to the skin. Of the remaining 35 patients, 18 improved, 15 remained the same, and two worsened. The average CPGAS score was +1.8 ± 0.4 (SEM) (P < 0.05 vs 0). Of the 18 patients with improvement, the average CPGAS score was +3.7 ± 0.3 (SEM), corresponding to "somewhat" to "moderately better" improvement in nausea/vomiting. Side effects occurred in nine patients: four developed constipation, three patients had skin rash, and two reported headaches. GTP was moderately effective in reducing refractory symptoms of nausea and/or vomiting from gastroparesis in 50% of patients. Mild side effects were reported by 25% of patients. GTP may be an effective treatment for nausea and vomiting in gastroparesis, and further study is warranted.

  1. Arthroscopic treatment of refractory adhesive capsulitis of the shoulder

    Directory of Open Access Journals (Sweden)

    Marcos Rassi Fernandes

    Full Text Available OBJECTIVE: to evaluate the results of arthroscopic treatment of refractory adhesive capsulitis of the shoulder associated as for improved range of motion after a minimum follow up of six years. METHODS: from August 2002 to December 2004, ten patients with adhesive capsulitis of the shoulder resistant to conservative treatment underwent arthroscopic surgery. One interscalene catheter was placed for postoperative analgesia before the procedure. All were in Phase II, with a minimum follow up of two years. The mean age was 52.9 years (39-66, predominantly female (90%, six on the left shoulder. The time between onset of symptoms and surgical treatment ranged from six to 20 months. Four adhesive capsulitis were found to be primary (40% and six secondary (60%. RESULTS: the preoperative mean of active anterior elevation was 92°, of external rotation was 10.5° of the L5 level internal rotation; the postoperative ones were 149°, 40° and T12 level, respectively. Therefore, the average gain was 57° for the anterior elevation, 29.5° for external rotation in six spinous processes. There was a significant difference in movements' gains between the pre and post-operative periods (p<0.001. By the Constant Score (range of motion, there was an increase of 13.8 (average pre to 32 points (average post. CONCLUSION: the arthroscopic treatment proved effective in refractory adhesive capsulitis of the shoulder resistant to conservative treatment, improving the range of joint movements of patients evaluated after a minimum follow up of six years.

  2. Different treatment modalities for refractory vaginismus in western Saudi Arabia.

    Science.gov (United States)

    Fageeh, Wafa M K

    2011-06-01

    Although vaginismus is a common sexual dysfunction in Saudi Arabia, there are limited data concerning the treatment modalities associated with patients with symptoms of vaginismus. This study is aimed to evaluate the presentation and different modalities of management in patients with severe refractory vaginismus in western Saudi Arabia. Successful penetrative sexual intercourse suggesting that common elements of the therapies used were successful. A retrospective study of patients presenting with severe refractory vaginismus treated in Jeddah, Saudi Arabia. The subjects were 15 women with third to fourth degree vaginismus who presented to King Abdulazziz University Hospital between January 1, 2008 and January 1, 2009. The mean age of the participants was 23 years. The mean duration of marriage before seeking medical advice was 12 months. Six patients had undergone conventional therapy successfully. The other six cases, four of which had a previous history of treatment failure, and two who were unresponsive to 4 months of conventional therapy were offered botulinum toxin type A. Five patients who received the Botox therapy had satisfactory intercourse on the same day of the treatment. One patient required a repeat injection after 2 months for recurrent vaginismus. Three of the 15 patients refused the treatment as they were already divorced and had only come in to exclude organic causes for their condition. Vaginismus is an overlooked topic in conservative societies such as Saudi Arabia. For most patients, not knowing who to confide in or where to turn to plays a major role in the under diagnosis of vaginismus. Conventional therapy proved effective in mild and moderate cases, while botulinum toxin has a more rapid effect and was thus more effective in severe cases. © 2011 International Society for Sexual Medicine.

  3. The effect of renal arteries sympathectomy on refractory hypertension

    Directory of Open Access Journals (Sweden)

    Reza Karbasi-Afshar

    2013-06-01

    Full Text Available Background: Sympathetic complex of over-activation kidneys is one of the main causes of primary hypertension (HTN. We aimed to assess the efficacy and safety of sympathectomy using 5Fr mariner catheter ablation on patients with refractory hypertension.Methods: In this prospective cohort study, patients who received three or more anti-hypertensive medications with 160mmHg systolic blood pressure (BP or more were randomly included and divided into 2 groups. Cases in the first group were undergone to renal denervation and the second group was treated by previous antihypertensive medications. Both groups were followed for six month by assessing BP and adverse effects.Results: One hundred and seventeenth patients (54% out of 212 screened patients were included in the first group (renal denervation and 95 patients as the second group. The mean of BP changes in the first group was 35/15 mmHg with standard deviation of 22/11mmHg. (P<0.001 in the second group, the mean changes of BP was not statistically significant. (5/0mmHg± 22/11, P=0.79 for systolic BP and P=0.96 for diastolic BP. 92% of 117 patients in the first group had a favorable BP decrease, which was defined as a 20mmHg or more decrease in BP, in comparison with 15% of 95 patients as controls (P=0.001. There was no observed complication after denervation in the first group.Conclusion: It seems that the sympathetic renal denervation can be an effective and safe method for treatment of refractory hypertensive patients indeed of routine medications although further studies with longer follow up duration and more cases are suggested for confirming this issue.

  4. Phenobarbital for Neonatal Seizures: Response Rate and Predictors of Refractoriness.

    Science.gov (United States)

    Spagnoli, Carlotta; Seri, Stefano; Pavlidis, Elena; Mazzotta, Silvia; Pelosi, Annalisa; Pisani, Francesco

    2016-10-01

    Background Phenobarbital is the first-line choice for neonatal seizures treatment, despite a response rate of approximately 45%. Failure to respond to acute anticonvulsants is associated with poor neurodevelopmental outcome, but knowledge on predictors of refractoriness is limited. Objective To quantify response rate to phenobarbital and to establish variables predictive of its lack of efficacy. Methods We retrospectively evaluated newborns with electrographically confirmed neonatal seizures admitted between January 1999 and December 2012 to the neonatal intensive care unit of Parma University Hospital (Italy), excluding neonates with status epilepticus. Response was categorized as complete (cessation of clinical and electrographic seizures after phenobarbital administration), partial (reduction but not cessation of electrographic seizures with the first bolus, response to the second bolus), or absent (no response after the second bolus). Multivariate analysis was used to identify independent predictors of refractoriness. Results Out of 91 newborns receiving phenobarbital, 57 (62.6%) responded completely, 15 (16.5%) partially, and 19 (20.9%) did not respond. Seizure type (p = 0.02), background electroencephalogram (EEG; p ≤ 0.005), and neurologic examination (p  ≤  0.005) correlated with response to phenobarbital. However, EEG (p  ≤  0.02) and seizure type (p  ≤  0.001) were the only independent predictors. Conclusion Our results suggest a prominent role of neurophysiological variables (background EEG and electrographic-only seizure type) in predicting the absence of response to phenobarbital in high-risk newborns. Georg Thieme Verlag KG Stuttgart · New York.

  5. Clinical features and course of refractory anemia with ring sideroblasts associated with marked thrombocytosis

    Science.gov (United States)

    Broseus, Julien; Florensa, Lourdes; Zipperer, Esther; Schnittger, Susanne; Malcovati, Luca; Richebourg, Steven; Lippert, Eric; Cermak, Jaroslav; Evans, Jyoti; Mounier, Morgane; Raya, José Maria; Bailly, François; Gattermann, Norbert; Haferlach, Torsten; Garand, Richard; Allou, Kaoutar; Besses, Carlos; Germing, Ulrich; Haferlach, Claudia; Travaglino, Erica; Luno, Elisa; Pinan, Maria Angeles; Arenillas, Leonor; Rozman, Maria; Perez Sirvent, Maria Luz; Favre, Bernardine; Guy, Julien; Alonso, Esther; Ahwij, Nuhri; Jerez, Andrés; Hermouet, Sylvie; Maynadié, Marc; Cazzola, Mario; Girodon, François

    2012-01-01

    Background Refractory anemia with ring sideroblasts associated with marked thrombocytosis was proposed as a provisional entity in the 2001 World Health Organization classification of myeloid neoplasms and also in the 2008 version, but its existence as a single entity is contested. We wish to define the clinical features of this rare myelodysplastic/myeloproliferative neoplasm and to compare its clinical outcome with that of refractory anemia with ring sideroblasts and essential thrombocythemia. Design and Methods We conducted a collaborative retrospective study across Europe. Our database included 200 patients diagnosed with refractory anemia with ring sideroblasts and marked thrombocytosis. For each of these patients, each patient diagnosed with refractory anemia with ring sideroblasts was matched for age and sex. At the same time, a cohort of 454 patients with essential thrombocythemia was used to compare outcomes of the two diseases. Results In patients with refractory anemia with ring sideroblasts and marked thrombocytosis, depending on the Janus Kinase 2 V617F mutational status (positive or negative) or platelet threshold (over or below 600×109/L), no difference in survival was noted. However, these patients had shorter overall survival and leukemia-free survival with a lower risk of thrombotic complications than did patients with essential thrombocythemia (P<0.001) but better survival (P<0.001) and a higher risk of thrombosis (P=0.039) than patients with refractory anemia with ring sideroblasts. Conclusions The clinical course of refractory anemia with ring sideroblasts and marked thrombocytosis is better than that of refractory anemia with ring sideroblasts and worse than that of essential thrombocythemia. The higher risk of thrombotic events in this disorder suggests that anti-platelet therapy might be considered in this subset of patients. From a clinical point of view, it appears to be important to consider refractory anemia with ring sideroblasts and

  6. Refractory myasthenia gravis – clinical profile, comorbidities and response to rituximab

    Science.gov (United States)

    Sudulagunta, Sreenivasa Rao; Sepehrar, Mona; Sodalagunta, Mahesh Babu; Settikere Nataraju, Aravinda; Bangalore Raja, Shiva Kumar; Sathyanarayana, Deepak; Gummadi, Siddharth; Burra, Hemanth Kumar

    2016-01-01

    Introduction: Myasthenia gravis (MG) is an antibody mediated autoimmune neuromuscular disorder characterized by fatigable muscle weakness. A proportion of myasthenia gravis patients are classified as refractory due to non responsiveness to conventional treatment. This retrospective study was done to evaluate clinical profile, epidemiological, laboratory, and features of patients with MG and mode of management using rituximab and complications. Methods: Data of myasthenia gravis patients admitted or presented to outpatient department (previous medical records) with MG between January 2008 and January 2016 were included. A total of 512 patients fulfilled the clinical and diagnostic criteria of myasthenia gravis of which 76 patients met the diagnostic certainty for refractory myasthenia gravis and were evaluated. Results: Out of 76 refractory MG patients, 53 (69.73%) patients fulfilled all the three defined criteria. The median age of onset of the refractory MG group was 36 years with a range of 27–53 years. In our study 25 patients (32.89%) belonged to the age group of 21–30 years. Anti-MuSK antibodies were positive in 8 non-refractory MG patients (2.06%) and 36 refractory MG patients (47.36%). Mean HbA1C was found to be 8.6±2.33. The dose of administered prednisone decreased by a mean of 59.7% (p=3.3x10–8) to 94.6% (p=2.2x10–14) after the third cycle of rituximab treatment. Conclusion: The refractory MG patients are most commonly female with an early age of onset, anti-MuSK antibodies, and thymomas. Refractory MG patients have higher prevalence and poor control (HbA1C >8%) of diabetes mellitus and dyslipidemia probably due to increased steroid usage. Rituximab is very efficient in treatment of refractory MG with adverse effects being low. PMID:27790079

  7. Oxidative versus Non-oxidative Decarboxylation of Amino Acids: Conditions for the Preferential Formation of Either Strecker Aldehydes or Amines in Amino Acid/Lipid-Derived Reactive Carbonyl Model Systems.

    Science.gov (United States)

    Zamora, Rosario; León, M Mercedes; Hidalgo, Francisco J

    2015-09-16

    Comparative formation of both 2-phenylethylamine and phenylacetaldehyde as a consequence of phenylalanine degradation by carbonyl compounds was studied in an attempt to understand if the amine/aldehyde ratio can be changed as a function of reaction conditions. The assayed carbonyl compounds were selected because of the presence in the chain of both electron-donating and electron-withdrawing groups and included alkenals, alkadienals, epoxyalkenals, oxoalkenals, and hydroxyalkenals as well as lipid hydroperoxides. The obtained results showed that the 2-phenylethylamine/phenylacetaldehyde ratio depended upon both the carbonyls and the reaction conditions. Thus, it can be increased using electron-donating groups in the chain of the carbonyl compound, small amounts of carbonyl compound, low oxygen content, increasing the pH, or increasing the temperature at pH 6. Opposed conditions (use of electron-withdrawing groups in the chain of the carbonyl compound, large amounts of carbonyl compound, high oxygen contents, low pH values, and increasing temperatures at low pH values) would decrease the 2-phenylethylamine/phenylacetaldehyde ratio, and the formation of aldehydes over amines in amino acid degradations would be favored.

  8. Study on the efficiency of ceramic coating for avoiding oxidation in carbon refractories

    International Nuclear Information System (INIS)

    Santos, I.M.G.; Cruz Junior, F.; Paskocimas, C.A.; Leite, E.R.; Longo, Elson; Varela, J.A.

    1997-01-01

    A ceramic coating made of sodium phosphossilicate and clay was developed to the protection of refractories against carbon oxidation during the pre-heating of siderurgical equipment. This search has the objective of comparing the refractory behaviour with and without coating, according to temperature, time and atmosphere. The results show that the coating is more efficient at higher temperatures. An important point is that the efficiency is smaller after long thermal is that the efficiency is smaller after long thermal treatments and at very aggressive conditions. In spite of this the oxidation is still smaller than in refractory without coating. (author)

  9. Bulk Vitrification Performance Enhancement: Refractory Lining Protection Against Molten Salt Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Schweiger, Michael J.; Evans, Michael B.; Smith, Benjamin T.; Arrigoni, Benjamin M.; Kim, Dong-Sang; Rodriguez, Carmen P.; Yokuda, Satoru T.; Matyas, Josef; Buchmiller, William C.; Gallegos, Autumn B.; Fluegel, Alexander

    2007-08-06

    Bulk vitrification (BV) is a process that heats a feed material that consists of glass-forming solids and dried low-activity waste (LAW) in a disposable refractory-lined metal box using electrical power supplied through carbon electrodes. The feed is heated to the point that the LAW decomposes and combines with the solids to generate a vitreous waste form. This study supports the BV design and operations by exploring various methods aimed at reducing the quantities of soluble Tc in the castable refractory block portion of the refractory lining, which limits the effectiveness of the final waste form.

  10. Central Diabetes Insipidus in Refractory Antineutrophil Cytoplasmic Antibody-associated Vasculitis.

    Science.gov (United States)

    Ohashi, Keiji; Morishita, Michiko; Watanabe, Haruki; Sada, Ken-Ei; Katsuyama, Takayuki; Miyawaki, Yoshia; Katsuyama, Eri; Narazaki, Mariko; Tatebe, Noriko; Watanabe, Katsue; Kawabata, Tomoko; Wada, Jun

    2017-11-01

    We herein describe two cases of refractory antineutrophil cytoplasmic antibody-associated vasculitis (AAV) complicated with diabetes insipidus (DI) possibly related to hypertrophic pachymeningitis (HP). One patient had microscopic polyangiitis and HP, which were refractory to cyclophosphamide, azathioprine, rituximab, mycophenolate mofetil (MMF), and mizoribine. Remission was finally achieved with the use of etanercept, but DI occurred 5 years later. The other patient had granulomatosis with polyangiitis, which that was refractory to cyclophosphamide, methotrexate, MMF, and rituximab. DI subsequently developed, but was successfully treated with etanercept. Dura mater hypertrophy was macroscopically observed in the latter case.

  11. Improvement of castable refractories for RH snorkel; RH shinshitsukanyo futeikeizai no kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Nishi, K.; Obana, T.; Fijii, T.; Shimizu, I. [Harima Ceramics Corp., Hyogo (Japan)

    1999-11-01

    Relating to corrosion of RH submerged nozzle, resistance against iron oxide of monolithic refractories was examined. Corrosion and seepage of refractories were measured by rotating corrosion, refractories include alumina-spinel castable, which is applied to RH under tank, and alumina-magnesia castable, which is generally used for RH, submerged nozzle. Alumina-spinel castable is superior in resistance against iron oxide than alumina-magnesia castable, and the resistance decreased with increase of stainless fiber addition to castable. Alumina-spinel castable without stainless fiber was suitable for bottom end of the dipping pipe. (NEDO)

  12. Determination of Unit Pressure Force in Material Volume in the Course of Refractory Stamping Press Moulding

    Directory of Open Access Journals (Sweden)

    Orłowicz A.W.

    2016-06-01

    Full Text Available The paper presents results of assessment of the unit pressure force within the refractory material volume in the course press-moulding of stampings for refractory precast shapes. The force was evaluated with the use of physical simulation of deformation undergone by lead balls placed in the raw refractory mass subjected to pressing in a metal die. To determine the value of unit pressure force applied to the aggregate grains in the course of stamping press-moulding, physical model of deformation of a sphere induced by the uniaxial stress state was used.

  13. Microstructural features of alumina refractories with mullite-zirconia aggregates

    Directory of Open Access Journals (Sweden)

    Ferrari, C. R.

    2003-02-01

    Full Text Available Refractory materials are often subjected to high temperatures and loads and their performance depends on their microstructural evolution during use. In this context, microstructural changes were monitored in alumina-based refractories containing mullite-zirconia aggregates and heat-treated at 1400°C and 1500°C for 2, 6, and 18 days. With the purpose of inducing in situ mullite formation, bricks containing microsilica were also prepared and heat-treated at 1500°C for 6 days for the sake of comparison. These heat treatments allowed for an evaluation of the use of refractories from the standpoint of temperature and time. In this work, scanning electron microscopy and X-ray diffraction analyses were made to identify the phases in the materials. The Rietveld method was also used for quantitative phase analyses. Interfacial reactions occurred between alumina and aggregates and between alumina and microsilica, causing the system to become mullitized. The effect of in situ-formed mullite was particularly evident in the results of the modulus of rupture of the materials containing microsilica. Creep tests revealed a reduction in the creep rate of materials treated at 1500°C for 18 days.

    El comportamiento de los materiales refractarios, cuando sometidos a altas temperaturas y a grandes esfuerzos mecánicos, está íntimamente relacionado con la evolución microestuctural, durante su uso. En este contexto, fue realizado un estudio de la evolución microestructural de los materiales refractarios de alumina conteniendo diferentes porcentajes de agregado de mullita–circona, sometidos a tratamientos térmicos por 2, 6 y 18 días, en temperaturas de 1400 y 1500oC. Fueron confeccionados, algunos ladrillos conteniendo microsílice, con la idea de se introducir la formación de mullita en situ. Para la comparación de los ladrillos, fueron realizados tratamientos térmicos por un periodo de 6 días en 1500oC. Estos tratamientos térmicos permitieron

  14. [Special penetration needling for refractory peripheral facial paralysis].

    Science.gov (United States)

    Cao, Rongjuan; Qiu, Xiaohu; Xie, Xiaokun

    2018-03-12

    To observe the clinical effect difference between special penetration needling and conventional penetration needling for the refractory peripheral facial paralysis. A total of 97 patients with intractable facial paralysis were randomized into an observation group (49 cases and 2 dropping) and a control group (48 cases and 4 dropping). In the observation group, special penetration needling at an angle about 45° between the penetration needle and paralysis muscle bundle was used, Yangbai (GB 14) through Touwei (ST 8), Yangbai (GB 14) through Shangxing (GV 23), Sizhukong (TE 23) through Yuyao (EX-HN 4), Qianzhen (Extra) through Yingxiang (LI 20), mutual penetration between Yingxiang (LI 20) and Jiache (ST 6). Conventional penetration needling was applied in the control group, Yangbai (GB 14) through Yuyao (EX-HN 4), Cuanzhu (BL 2) through Yuyao (EX-HN 4), mutual penetration between Dicang (ST 4) and Jiache (ST 6), Qianzheng (Extra) through Dicang (ST 4), Sibai (ST 2) through Yingxiang (LI 20). Three groups of electroacupuncture (discontinuous wave, 1 Hz) with tolerance were connected respectively in the two groups, Yangbai (GB 14) and Sizhukong (TE 23), Yangbai (GB 14) and Qianzheng (Extra), Yingxiang (LI 20) and Jiache (ST 6) in the observation group, Yangbai (GB 14) and Cuanzhu (BL 2), Dicang (ST 4) and Jiache (ST 6), Qianzheng (Extra) and Sibai (ST 2) in the control group. TDP was applied in the two groups at the affected Yifeng (TE 17), Jiache (ST 6) and Qianzheng (Extra), which were around the ear. Perpendicular insertion was used at Yifeng (TE 17) at the affected side and Hegu (LI 4) at the healthy side and bilateral Zusanli (ST 36). The needles were retained for 30 min. The treatment was given for 3 courses, once a day and 10 days as a course, 5 days at the interval. House-Brackmann (H-B) facial nerve grading score was recorded before and after treatment. The clinical effects were compared. The H-B scores after treatment in the two groups were higher than

  15. Clinicopathological study on refractory epilepsy treated by several epilepsy surgeries

    Directory of Open Access Journals (Sweden)

    Yan LI

    2018-04-01

    Full Text Available Objective To observe and investigate the clinicopathological features and types of refractory epilepsy treated by several epilepsy surgeries. Methods There were 19 patients with age less than 20 years who underwent 2 (16/19 or 3 (3/19 epilepsy surgeries. After pathological examination, pathological diagnosis and subtype was made according to focal cortical dysplasia (FCD classification proposed by International League Against Epilepsy (ILAE Diagnostic Methods Commission in 2011 and World Health Organization (WHO Classification of Tumors of Central Nervous System in 2007. Results The operation intervals were 1-10 years (average 4.24 years. The pathological diagnoses after first operation were FCDⅠb in 2 cases (2/19, FCDⅡa in 2 cases (2/19, FCDⅢa in one case (1/19, FCDⅢd in one case (1/19, 5 cases of tumor lesions [2 (2/19 of astrocytoma, one (1/19 of oligoastrocytoma, one (1/ 19 of mixed germ cell tumor, one (1/19 of hysembryoplastic neuroepithelial tumor (DNT], one case (1/19 of hamartoma, one case (1/19 of angioma, one case (1/19 of heterotopic gray matter, and 4 cases (4/19 of ulegyria. The last one (1/19 underwent corpus callosal incision. Pathological diagnoses after reoperation were FCDⅢa in 4 cases (4/19, FCDⅢb in 4 cases (4/19, FCDⅢc in one case (1/19, FCDⅢd in 8 cases (8/19, dual pathology (FCDⅢa with oligoastrocytoma and with glial scar and/or ulegyria in 2 cases (2/19. Patients were followed up for 0.50-5.00 years after second or third operation (average 2.34 years, and the results showed Engel Ⅰ in 10 patients (10/19, Engel Ⅱ in 6 patients (6/19 and Engel Ⅲ in 3 patients (3/19. The rate of good prognosis was 84.21%. Conclusions The pathological diagnoses of brain tissue resected from patients accepting several epilepsy surgeries are mainly FCD Ⅲ and dual pathology. It is suggested that the second or third operation would be effective for refractory epilepsy patients who underwent surgery already. DOI: 10

  16. [Refractory heart failure. Models of hospital, ambulatory, and home management].

    Science.gov (United States)

    Oliva, Fabrizio; Alunni, Gianfranco

    2002-08-01

    Chronic heart failure is an enormous and growing public health problem and is reaching epidemic proportions. Its economic impact is dramatic; two thirds of expenses are for hospitalizations and relatively little is being spent for medications and outpatient visits. Most of the hospitalizations, deaths and costs are incurred by a relatively small minority of patients who may be described as having "complex", "advanced", "refractory" or "end-stage" heart failure; however, in essence they are patients who have severe symptoms and/or recurrent hospitalizations and/or emergency department visits despite maximal oral therapy. Many of the recommendations regarding the management of these patients are based more on experience than on evidence from controlled trials. This, because such patients require an individualized therapy which limits their inclusion in large trials and because support is less easily available when testing specific strategies than when testing specific agents. Improving the treatment of this group of patients by optimizing their medical regimen, aggressive monitoring and providing early intervention to avert heart failure can reduce their morbidity, mortality and costs of care. Refractory heart failure is not a single disease and it is extremely unlikely that all patients should be treated in a similar manner; before selecting the appropriate therapy, the clinician must categorize and profile the patient. The first step should be a re-evaluation of the previous treatment because many patients are treated suboptimally. It is also important to identify reversible or precipitating factors. For patients with advanced heart failure, the initial goal of therapy is to improve symptoms; the next goal is to maintain the improvement and to prevent later deterioration. The appropriate treatment plan will reflect the presence of comorbidities, the patients' history regarding previous responses to therapy, their own expectations with regard to daily life. The most

  17. Determination of ferrous and total iron in refractory spinels

    Energy Technology Data Exchange (ETDEWEB)

    Amonette, J.E. [Physical Sciences Division, Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Matyáš, J. [Material Science Department, Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

    2016-03-03

    Accurate and precise determination of the redox state of iron (Fe) in spinels presents a significant challenge due to their refractory nature. The resultant extreme conditions needed to obtain complete dissolution generally oxidize some of the Fe(II) initially present and thus prevent the use of colorimetric methods for Fe(II) measurements. To overcome this challenge we developed a hybrid oxidimetric/colorimetric approach, using Ag(I) as the oxidimetric reagent for determination of Fe(II) and 1,10-phenanthroline as the colorimetric reagent for determination of total Fe. This approach, which allows determination of Fe(II) and total Fe on the same sample, was tested on a series of four geochemical reference materials and then applied to the analysis of Fe(Ni) spinel crystals isolated from simulated high-level-waste (HLW) glass and of several reagent magnetites. Results for the reference materials were in excellent agreement with recommended values, with the exception of USGS BIR-1, for which higher Fe(II) values and lower total Fe values were obtained. The Fe(Ni) spinels showed Fe(II) values at the detection limit (ca. 0.03 wt% Fe) and total Fe values higher than obtained by ICP-AES analysis after decomposition by lithium metaborate/tetraborate fusion. For the magnetite samples, total Fe values were in agreement with reference results, but a wide range in Fe(II) values was obtained indicating various degrees of conversion to maghemite. Formal comparisons of accuracy and precision were made with 13 existing methods. Accuracy for Fe(II) and total Fe was at or near the top of the group. Precision varied with the parameter used to measure it but was generally in the middle to upper part of the group for Fe(II) while that for total Fe ranged from the bottom of the group to near the top. - Highlights: • Refractory samples, such as spinels, are the most difficult for Fe redox analysis. • Oxidimetric(Ag{sup +})/colorimetric (phen) method allows analysis of a single

  18. [Refractory hypertention in a female patient with renal failure].

    Science.gov (United States)

    Zuccalà, A; Losinno, F; Fiorenza, S; Lifrieri, F; Rapanà, R

    2005-01-01

    We report one sixty-seven years-old female who presented with hypertension refractory to antihypertensive drugs. She had an elevated BP for approximately 15 years. In the last 8-10 months her hypertension had become difficult to control. Her BP ranged between 180/100 mmHg and 220/1220 mmHg on atenolol 100 mg once daily, methyldopa 500 mg three times daily, furosemide 25 mg twice daily, doxazosine 4 mg twice daily. When she was referred to our unit serum creatinine was 2.3 mg/dL and she had a mild proteinuria (70 mg/dL) without microematuria. Ultrasonography showed a left kidney size in the low-normal range (LD 11 cm) and a small right kidney (LD 9 cm). Renal angiography showed a severe, ostial stenosis of the left renal artery and a total thrombosis of the right renal artery with a blood supply to the right kidney provided by collateral channels. An ACE-I was added to the therapy but a sharp increase in serum creatinina (up to 6.4 mg/dL) prompted us to withdraw the drug. She underwent a renal angioplasty on the left side and a Palmaz stent was placed. The control angiography showed a good anatomical result. Three months after the manoeuvre the patient was again referred to our unit with headache, nausea vomiting and hyper-tension refractory to amlodipine 10 mg/day, doxazosine 4 mg twice a a day, atenolol 50 mg/day, furosemide 50 mg/day. A doppler ultrasonography and a magnetic resonance angiogram showed no restenosis on the treated artery. An ACE-I was again administered and BP on this drug was 145/90 mmHg after one month and 130/85 after three months. Headache, nausea and vomiting disappeared. Serum creatinina kept unchanged (2.2 mg/dL). Comment. In this case the benefit of angioplasty on blood pressure control was indirect. Apparently the manoeuvre showed no effect on blood pressure, but the angioplasty allowed us to use of an ACE-Inhibitor, without any negative effect on renal function, and thus to adequately control blood pressure.

  19. Ultra light weight refractory material for high temperature applications

    Energy Technology Data Exchange (ETDEWEB)

    Finke, V.; Kern, H. [Rath GmbH, Meissen (Germany); Springer, M. [Aug. Rath jun. GmbH, Vienna (Austria)

    2007-07-01

    The requirements on companies running high temperature processes, i.e. at temperatures about 1000 C and above, have increased dramatically within the last few years. For technological, economical and ecological purposes each application has to be checked carefully. As well the political discussion regarding environmental pollution, greenhouse effect and emission trading and the guidelines for climate and environmental protection exert massive influence on thermal process technology and pose an appropriate challenge for the companies. Next to costs of labour and raw materials the costs for energy and environmental costs play a decisive role more and more. The pressure on the management thereby incurred may have a lasting effect on innovations regarding increase of energy efficiency, decrease of CO{sub 2}-emission and often on non negligible increase of productivity. Mainly against the background of the highly scheduled European aims for emission reduction and also in consideration of the still proceeding globalisation the usage of state-of-the-art refractory technics in thermal process technology is of particular importance for business success, for reducing of environmental impact and last but not least for conservation and safeguarding of jobs in Europe and Germany. The applications for products made from high-temperature insulation wool in high temperature applications have strongly increased during the last five years. Especially the production capacities of polycrystalline wool (aluminium oxide wool e.g. Altra B72) have been doubled within the last three years. Primarily ultra light weight products made from HTIW are used in industrial furnaces with application temperatures above 1000 C and / or with high thermo-mechanical (thermal shock) and chemical exposure. The outstanding and essential advantages of these materials are obviously: Ultra light weight material with high resilience and flexibility, Optimised energy consumption (energy saving up to 50% compared

  20. Significance of MDR1 and multiple drug resistance in refractory human epileptic brain

    Directory of Open Access Journals (Sweden)

    Dini Gabriele

    2004-10-01

    Full Text Available Abstract Background The multiple drug resistance protein (MDR1/P-glycoprotein is overexpressed in glia and blood-brain barrier (BBB endothelium in drug refractory human epileptic tissue. Since various antiepileptic drugs (AEDs can act as substrates for MDR1, the enhanced expression/function of this protein may increase their active extrusion from the brain, resulting in decreased responsiveness to AEDs. Methods Human drug resistant epileptic brain tissues were collected after surgical resection. Astrocyte cell cultures were established from these tissues, and commercially available normal human astrocytes were used as controls. Uptake of fluorescent doxorubicin and radioactive-labeled Phenytoin was measured in the two cell populations, and the effect of MDR1 blockers was evaluated. Frozen human epileptic brain tissue slices were double immunostained to locate MDR1 in neurons and glia. Other slices were exposed to toxic concentrations of Phenytoin to study cell viability in the presence or absence of a specific MDR1 blocker. Results MDR1 was overexpressed in blood vessels, astrocytes and neurons in human epileptic drug-resistant brain. In addition, MDR1-mediated cellular drug extrusion was increased in human 'epileptic' astrocytes compared to 'normal' ones. Concomitantly, cell viability in the presence of cytotoxic compounds was increased. Conclusions Overexpression of MDR1 in different cell types in drug-resistant epileptic human brain leads to functional alterations, not all of which are linked to drug pharmacokinetics. In particular, the modulation of glioneuronal MDR1 function in epileptic brain in the presence of toxic concentrations of xenobiotics may constitute a novel cytoprotective mechanism.

  1. DKK1 is a potential novel mediator of cisplatin-refractoriness in non-small cell lung cancer cell lines

    International Nuclear Information System (INIS)

    Salim, Hogir; Zong, Dali; Hååg, Petra; Novak, Metka; Mörk, Birgitta; Lewensohn, Rolf; Lundholm, Lovisa; Viktorsson, Kristina

    2015-01-01

    Platinum compounds are the mainstay of chemotherapy for lung cancer. Unfortunately treatment failure remains a critical issue since about 60 % of all non-small cell lung cancer (NSCLC) patients display intrinsic platinum resistance. We analyzed global gene expression profiles of NSCLC clones surviving a pulse treatment with cisplatin and mapped deregulated signaling networks in silico by Ingenuity Pathway Analysis (IPA). Further validation was done using siRNA. The pooled cisplatin-surviving NSCLC clones from each of the biological replicates demonstrated heterogeneous gene expression patterns both in terms of the number and the identity of the altered genes. Genes involved in Wnt signaling pathway (Dickkopf-1, DKK1), DNA repair machinery (XRCC2) and cell-cell/cell-matrix interaction (FMN1, LGALS9) were among the top deregulated genes by microarray in these replicates and were validated by q-RT-PCR. We focused on DKK1 which previously was reported to be overexpressed in NSCLC patients. IPA network analysis revealed coordinate up-regulation of several DKK1 transcriptional regulators (TCF4, EZH2, DNAJB6 and HDAC2) in cisplatin-surviving clones from that biological replicate. Knockdown of DKK1 by siRNA sensitized for cisplatin in two different NSCLC cell lines and in ovarian A2780 cells, but not in the A2780 cis subline made resistant to cisplatin by chronic exposure, suggesting a role of DKK1 in intrinsic but not acquired platinum refractoriness. We identified DKK1 as a possible marker of a cisplatin-refractory phenotype and as a potential novel therapeutic target to improve platinum response of NSCLC cells. The online version of this article (doi:10.1186/s12885-015-1635-9) contains supplementary material, which is available to authorized users

  2. On the Structural Characterization of a Series of Novel Ni-Nb-Sn Refractory Alloy Glasses

    National Research Council Canada - National Science Library

    Tokarz, Michelle

    2004-01-01

    Recently refractory alloy glasses of varying Ni, Nb and Sn concentrations were prepared and studied via several characterization method including x-ray diffraction via standard lab arid synchrotron...

  3. Advances in refractories for the metallurgical industries III: proceedings of the international symposium

    Energy Technology Data Exchange (ETDEWEB)

    Allaire, C.; Rigaud, M. [eds.] [Ecole Polytchnique, Montreal, PQ (Canada)

    1999-07-01

    In the three years since the last symposium key innovations have been made in the penetration of monoliths in all sectors of the metallurgical industries. The symposium was presented within the 38th Annual Conference of Metallurgists of the Canadian Institute of Mining, Metallurgy and Petroleum. Broad international coverage was maintained with papers originating from 12 different countries including: Australia, Canada, China, France, Germany, India, Iran, Japan, Korea, Mexico, New Zealand, Norway, and the United States. The 27 papers presented are divided into seven sessions to reflect the interests of the participants. The sessions included mold fluxes I and II, aluminum refractories, alumina castables, andalusite castables, continuous casting of refractories, aluminum refractories II and copper-nickel refineries. One paper on refractories for exhaust gas scrubbers is abstracted separately.

  4. Super-Refractory Status Epilepticus: Report of a Case and Review of the Literature.

    Science.gov (United States)

    Lapenta, Leonardo; Frisullo, Giovanni; Vollono, Catello; Brunetti, Valerio; Giannantoni, Nadia Mariagrazia; Sandroni, Claudio; Di Lella, Giuseppe; Della Marca, Giacomo

    2015-10-01

    Super-refractory status epilepticus (SE; ie, SE continuing or recurring despite 24 hours of general anesthesia) is a severe condition with high percentage of mortality and morbidity. Usually, this condition occurs because of serious brain damage; nevertheless, some patients develop super-refractory SE without identifiable etiology. Although not uncommonly encountered in neurointensive care, scientific data on this condition are still lacking in terms of treatment and prognosis. Herein, we report a case of super-refractory SE with recovery after 50 days, despite electroencephalographic (EEG) and magnetic resonance imaging (MRI) signs traditionally related to poor prognosis. A review of the literature on super-refractory SE is also presented. © EEG and Clinical Neuroscience Society (ECNS) 2014.

  5. Pulsed radiofrequency of brachial plexus under ultrasound guidance for refractory stump pain: a case report

    Directory of Open Access Journals (Sweden)

    Zheng B

    2017-11-01

    Full Text Available Bixin Zheng, Li Song, Hui Liu Department of Pain Management, West China Hospital of Sichuan University, Chengdu, China Abstract: The post-amputation (pain syndrome, including stump pain, phantom limb sensation, and phantom limb pain is common but difficult to treat. Refractory stump pain in the syndrome is an extremely challenging and troublesome clinical condition. Patients respond poorly to drugs, nerve blocks, and other effective treatments like spinal cord stimulation and surgery. Pulsed radiofrequency (PRF technique has been shown to be effective in reducing neuropathic pain. This report describes a patient with persistent and refractory upper limb stump pain being successfully relieved with PRF of brachial plexus under ultrasound guidance after a 6-month follow-up period, suggesting that PRF may be considered as an alternative treatment for refractory stump-neuroma pain. Keywords: ultrasound guidance, pulsed radiofrequency, brachial plexus, refractory stump pain 

  6. Use of perampanel in one case of super-refractory hypoxic myoclonic status: Case report

    Directory of Open Access Journals (Sweden)

    Estevo Santamarina

    2015-01-01

    Conclusion: This case shows the potential utility of PER as a therapeutic option in super-refractory hypoxic status and even its potential use before other aggressive alternatives considering their greater morbidity.

  7. Refractory angina pectoris in end-stage coronary artery disease : Evolving therapeutic concepts

    NARCIS (Netherlands)

    Schoebel, FC; Frazier, OH; Jessurun, GAJ; DeJongste, MJL; Kadipasaoglu, KA; Jax, TW; Heintzen, MP; Cooley, DA; Strauer, BE; Leschke, M

    1997-01-01

    Refractory angina pectoris in coronary artery disease is defined as the persistence of severe anginal symptoms despite maximal conventional antianginal combination therapy. Further, the option to use an invasive revascularization procedure such as percutaneous coronary balloon angioplasty or

  8. Applications of radioisotopes for studying refractory wear-out in Bhilai Steel Plant

    International Nuclear Information System (INIS)

    Dubey, R.S.; Bose, U.P.; Shipstone, A.J.

    1979-01-01

    In Bhilai Steel Plant, investigations were carried out to study the refractory wear-out of (i) hearth bottom of blast furnaces, (ii) roof of open hearth furnaces, and (iii) hot metal mixer lining, by using radioisotope tracer techniques with a view to evaluate the life of the refractory lining at various locations and to help in planning its timely hot and cold repairs. The life of the refractory lining has the effective bearing on the overall production and hence on the economy of the plant. The two radiometric methods employed for studying the erosion of the refractory lining, by using isotope inserted bricks at various positions without damaging the lining are (i) based on recording the penetration of gamma rays emitting from the radioactive isotopes inserted at definite points of the brick lining and, (ii) by detecting the radioactivity of the pig iron or steel arising due to washing away of the respective radioactive isotopes previously inserted in the lining. In hot mixers also radioisotope sources were placed in the critical location of refractory lining and the washing out of radioisotope due to refractory brick wear out was detected by radiogauging at site. It has been found that radiotracer technique with periodic radiogauging is very useful method for tracing the radioisotope source if more than one refractory brick with isotope is placed, as in the case of open hearth furnaces. The results of radioanalysis revealed that radioactivity coming alongwith hot metal steel has been far below the permissible limit of concentration i.e. 20 micro-curie per ton of metal. Further, during dismantling of the residual refractory lining of open hearth furnaces or hot metal mixers, bricks containing radioisotopes have been successfully retrieved for safe disposal. (auth.)

  9. Energy conservation in industrial furnaces with vertical radiation roofs of reinforced refractory concrete

    Energy Technology Data Exchange (ETDEWEB)

    Grafe, E

    1981-01-01

    The paper discusses static systems for furnaces of reinforced refractory concrete, the temperature field over the finned-plate cross section, the calculation of the reinforced refractory concrete, experimental application in a flat open-hearth pusher furnace, a pack heating furnace, and a sinker furnace. There are cantilever beam plates, frames, and drop ceiling elements particularly suited for efficient use of high-performance burners.

  10. Diode and Nd:YAG laser in a case of refractory acne keloidalis nuchae

    Directory of Open Access Journals (Sweden)

    Ravi Kumar Chittoria

    2015-03-01

    Full Text Available Acne keloidalis nuchae (AKN is a disease of unclear etiology that mainly affects males. Medical treatment of AKN is difficult, with refractory cases often requiring ablation by laser or surgical resection. We report herein, a 23-year-old male with refractory AKN treated successfully with combined laser ablation, using an 810-nm diode laser and a 1064-nm Nd:YAG laser.

  11. Morphological differentiation of severe aplastic anaemia from hypocellular refractory cytopenia of childhood

    DEFF Research Database (Denmark)

    Baumann, Irith; Führer, Monika; Behrendt, Sonja

    2012-01-01

    To evaluate the reproducibility and reliability of the histomorphological criteria differentiating severe aplastic anaemia (SAA) and hypoplastic refractory cytopenia of childhood (RCC), the most frequently acquired hypocellular bone marrow conditions of childhood.......To evaluate the reproducibility and reliability of the histomorphological criteria differentiating severe aplastic anaemia (SAA) and hypoplastic refractory cytopenia of childhood (RCC), the most frequently acquired hypocellular bone marrow conditions of childhood....

  12. Symposium on refractory organic substances in the environment - Rose II. Abstracts of oral and poster papers

    Energy Technology Data Exchange (ETDEWEB)

    Frimmel, F H; Abbt-Braun, G [eds.

    2000-07-01

    Again the Deutsche Forschungsgemeinschaft has generously supported the 25 research projects working together on Refractory Organic Substances in the Environment (ROSE). Numerous researchers from universities and research institutes all over Germany focused upon the characterization of refractory organic material from brown water, soil seepage water as well as treated and untreated waste water through the compilation of analytical and biochemical data on the genesis and transformation of the isolated organic material and its interactions with other water constituents. (orig.)

  13. Longstanding refractory pseudophakic cystoid macular edema resolved using intravitreal 0.7 mg dexamethasone implants

    DEFF Research Database (Denmark)

    Brynskov, Troels; Laugesen, Caroline Schmidt; Halborg, Jakob

    2013-01-01

    Refractory pseudophakic cystoid macular edema (PCME) following cataract surgery has long posed a challenge to clinicians, but intravitreal injections with a sustained delivery 0.7 mg dexamethasone implant has emerged as a promising therapy for this condition.......Refractory pseudophakic cystoid macular edema (PCME) following cataract surgery has long posed a challenge to clinicians, but intravitreal injections with a sustained delivery 0.7 mg dexamethasone implant has emerged as a promising therapy for this condition....

  14. Refractory Hypertension: Determination of Prevalence, Risk Factors and Comorbidities in a Large, Population-Based Cohort

    Science.gov (United States)

    Calhoun, David A.; Booth, John N.; Oparil, Suzanne; Irvin, Marguerite R.; Shimbo, Daichi; Lackland, Daniel T.; Howard, George; Safford, Monika M.; Muntner, Paul

    2014-01-01

    Refractory hypertension is an extreme phenotype of antihypertensive treatment failure. Participants in the REasons for Geographic And Racial Differences in Stroke (REGARDS) Study, a large (n=30,239), population-based cohort were evaluated to determine the prevalence of refractory hypertension and associated cardiovascular risk factors and comorbidities. Refractory hypertension was defined as uncontrolled blood pressure (systolic/diastolic ≥ 140/90 mm Hg) on ≥ 5 antihypertensive drug classes. Participants with resistant hypertension (systolic/diastolic ≥140/90 mm Hg on ≥ 3 orhypertensive participants served as comparator groups. Of 14,809 REGARDS participants receiving antihypertensive treatment, 78 (0.5%) had refractory hypertension. The prevalence of refractory hypertension was 3.6% among participants with resistant hypertension(n=2,144) and 41.7% among participants on 5 or more antihypertensive drug classes. Among all hypertensive participants, African American race, male gender, living in the stroke belt or buckle, higher body mass index, lower heart rate, reduced estimated glomerular filtration rate, albuminuria, diabetes and history of stroke and coronary heart disease were associated with refractory hypertension. Compared to resistant hypertension, prevalence ratios for refractory hypertension were increased for African Americans (3.00, 95% CI 1.68 – 5.37) and those with albuminuria (2.22, 95% CI 1.40 – 3.52) and diabetes (2.09, 95% CI 1.32 – 3.31). The median 10-year Framingham risk for coronary heart disease and stroke was higher among participants with refractory hypertension compared to either comparator group. These data indicate that while resistant hypertension is relatively common among treated hypertensive patients, true antihypertensive treatment failure is rare. PMID:24324035

  15. Recent materials compatibility studies in refractory metal-alkali metal systems for space power applications.

    Science.gov (United States)

    Harrison, R. W.; Hoffman, E. E.; Davies, R. L.

    1972-01-01

    Advanced Rankine and other proposed space power systems utilize refractory metals in contact with both single-phase and two-phase alkali metals at elevated temperatures. A number of recent compatibility experiments are described which emphasize the excellent compatibility of refractory metals with the alkali metals, lithium, sodium, and potassium, under a variety of environmental conditions. The alkali metal compatibilities of tantalum-, columbium-, molybdenum-, and tungsten-base alloys are discussed.

  16. Fragmentation process of vitrified ceramic waste (VCW) aiming its incorporation in silico-aluminous refractory concrete for production of refractory bricks

    International Nuclear Information System (INIS)

    Gomes, L.B.; Brandalise, R.N.; Santos, V. dos; Bergmann, C.P.

    2012-01-01

    Ceramic industry generates large amounts of waste, usually disposed in landfills. Reuse could minimize their generation and provides sustainable solutions. However, the energy cost of grinding these waste becomes a hindrance to their reuse. This work aims to obtain particle sizes of vitrified ceramic waste (VCW) using a fast, efficient and low cost fragmentation process as well as its use in refractory concrete. The results shows a wide range of particle size of VCW, which can be used as a promising source of raw material for production of refractory concrete. (author)

  17. Prednisone and vardenafil hydrochloride for refractory levamisole-induced vasculitis.

    Science.gov (United States)

    Mandrell, Joshua; Kranc, Christina L

    2016-08-01

    Levamisole is an immunomodulatory drug that was previously used to treat various medical conditions, including parasitic infections, nephrotic syndrome, and colorectal cancer. Over the last few years, increasing amounts of levamisole have been used as an adulterant in cocaine. Levamisole-cut cocaine has become a concern because it is known to cause a necrotizing purpuric rash, autoantibody production, and life-threatening leukopenia. Mixed histologic findings of vasculitis and thrombosis are characteristic of levamisole-induced purpura. The recommended management of levamisole-induced vasculitis currently involves withdrawal of the culprit along with supportive treatment. We describe a patient with levamisole-induced vasculitis who continued to develop skin lesions despite self-reported cocaine cessation. Complete resolution of cutaneous disease occurred with the addition of oral prednisone and vardenafil hydrochloride, suggesting the possibility of a new treatment option in patients with refractory disease. In addition, we review the clinical presentation, disease course, diagnostic approach, laboratory findings, histology, and management of levamisole-induced vasculitis. The harmful effects of levamisole-cut cocaine are serious enough that public alerts have been issued to increase awareness. Clinicians should consider the possibility of levamisole exposure in cocaine users presenting with any combination of fever, neutropenia, and necrotic skin lesions, especially in acral areas including the ears.

  18. Refractory Seizures in Tramadol Poisoning: A Case Report

    Directory of Open Access Journals (Sweden)

    Mohammad Majidi

    2014-09-01

    Full Text Available Background: Tramadol, an analgesic drug abused by opioid addicts, is also abused accidentally or for suicidal purposes. Tramadol poisoning can induce CNS depression, seizures, coma, and ultimately death. Case: In this report, a 30-year-old male was admitted to the emergency department due to suicidal attempt with ingestion of 14000 mg (140 tablet 100 mg of tramadol. He had history of suicidal attempts in past years as well as depression in his past medical history, but he had not abused tramadol and other drugs in his history. There was no history of epilepsy or head trauma in. He presented with generalized seizures two hours post ingestion, and, then, he was referred to hospital four hours later. Generalized seizures were poorly controlled by multiple medications. Due to respiratory arrest, endotracheal tube was inserted and he was admitted to the ICU immediately. At admission, he experienced hypovolemic shock, hypoglycemia, coma, apnea, refractory seizures, muscle spasms, acute respiratory distress syndrome, coagolative disorder, rhabdomyolysis, and acute renal failure. Despite medical managements, he died 38 days after ingestion. Conclusion: In this report, despite using inhalational anesthetic drugs, seizures continued and were very poorly controlled. Cause of death in this patient can be seen as the side effects of tramadol poisoning.

  19. Development of refractory ceramic using waste of petrochemical catalysts

    International Nuclear Information System (INIS)

    Pedroso, M.A.; Mymrine, V.

    2011-01-01

    The manufacturing of catalytic catalysts by the company FCC SA. for the Brazilian petrochemical industry is 25,000 tons per annum, which after going through the cracking process cannot undergo regeneration any longer, being wasted with humidity near 70%. To increase the economical and environmental efficiency of the use of this rejected catalyst, without preliminary drying, a method of using it as main raw material in composition like kaolin was developed, as well as in ash and glass for the manufacturing of common (regular) and refractory ceramic. The mixture of these components were burnt at temperatures of 1100 deg C, 1200°C, 1250°C and 1300°C. The ceramics with 30% and 40% in weight of wasted catalyst, sintered in 1250 deg C or 1300 deg C have flexion of 10,8 - 12,9 MPa. After burning the mixtures, the chemical interaction of the initial components was determined by the methods of RXD, MEV and EDS, synthesizing new minerals like Diopside Ca(Mg,Al)(Si,Al) 2 O 6 , Nepheline (K,Na)AlSiO 4 , Lazurite Na 8 [Al 2 SiO 4 ] 6 [SO 4 ,S] 2 , Magnetite Fe 3 O 4 , Albite Na Al Si 3 O 8 and high content of vitreous amorphous phase. (author)

  20. Halo Formation During Solidification of Refractory Metal Aluminide Ternary Systems

    Science.gov (United States)

    D'Souza, N.; Feitosa, L. M.; West, G. D.; Dong, H. B.

    2018-02-01

    The evolution of eutectic morphologies following primary solidification has been studied in the refractory metal aluminide (Ta-Al-Fe, Nb-Al-Co, and Nb-Al-Fe) ternary systems. The undercooling accompanying solid growth, as related to the extended solute solubility in the primary and secondary phases can be used to account for the evolution of phase morphologies during ternary eutectic solidification. For small undercooling, the conditions of interfacial equilibrium remain valid, while in the case of significant undercooling when nucleation constraints occur, there is a departure from equilibrium leading to unexpected phases. In Ta-Al-Fe, an extended solubility of Fe in σ was observed, which was consistent with the formation of a halo of μ phase on primary σ. In Nb-Al-Co, a halo of C14 is formed on primary CoAl, but very limited vice versa. However, in the absence of a solidus projection it was not possible to definitively determine the extended solute solubility in the primary phase. In Nb-Al-Fe when nucleation constraints arise, the inability to initiate coupled growth of NbAl3 + C14 leads to the occurrence of a two-phase halo of C14 + Nb2Al, indicating a large undercooling and departure from equilibrium.

  1. Helium-Cooled Refractory Alloys First Wall and Blanket Evaluation

    International Nuclear Information System (INIS)

    Wong, C.P.C.; Nygren, R.E.; Baxi, C.B.; Fogarty, P.; Ghoniem, N.; Khater, H.; McCarthy, K.; Merrill, B.; Nelson, B.; Reis, E.E.; Sharafat, S.; Schleicher, R.; Sze, D.K.; Ulrickson, M.; Willms, S.; Youssef, M.; Zinkel, S.

    1999-01-01

    Under the APEX program the He-cooled system design task is to evaluate and recommend high power density refractory alloy first wall and blanket designs and to recommend and initiate tests to address critical issues. We completed the preliminary design of a helium-cooled, W-5Re alloy, lithium breeder design and the results are reported in this paper. Many areas of the design were assessed, including material selection, helium impurity control, and mechanical, nuclear and thermal hydraulics design, and waste disposal, tritium and safety design. System study results show that at a closed cycle gas turbine (CCGT) gross thermal efficiency of 57.5%, a superconducting coil tokamak reactor, with an aspect ratio of 4, and an output power of 2 GWe, can be projected to have a cost of electricity at 54.6 mill/kWh. Critical issues were identified and we plan to continue the design on some of the critical issues during the next phase of the APEX design study

  2. Refractory Dysphonia Due to Isolated Cricothyroid Muscle Dystonia.

    Science.gov (United States)

    Kraft, Shannon; Childes, Jana; Hillel, Allen; Schindler, Joshua

    2016-07-01

    To demonstrate the utility of electromyography (EMG) in the evaluation and management of treatment-resistant dysphonia. We report a case of refractory dysphonia in which EMG was used to identify and treat isolated cricothyroid (CT) dystonia. The patient, a healthy 43-year-old woman, presented with 9 months of progressive hoarseness. Her symptoms were present across vocal tasks but were particularly bothersome while dictating. On presentation, her voice was rated grade 3, roughness 3, breathiness 1, asthenia 0, and strain 3 (G3R3B1A0S3). Videostroboscopy was remarkable for hyperfunction. Voice therapy was not beneficial despite appropriate effort. Microdirect laryngoscopy revealed no evidence of structural pathology. The patient was referred for EMG because of her normal examination and failure to improve with therapy. The CT muscle demonstrated an increased latency of 750 ms in all vocal tasks. One month after CT injection with 3 units of botulinum toxin (BTX), her voice was improved. Perceptual voice evaluation was rated G1R1B0A0S1. Voice Handicap Index improved from 87 to 35. In the absence of structural pathology, EMG can be a useful adjunct in the diagnosis of dysphonia that persists despite adequate trials of voice therapy. To our knowledge, this is the only report of laryngeal dystonia due to isolated CT dysfunction successfully treated with BTX. Copyright © 2016 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  3. Low-dose aripiprazole for refractory burning mouth syndrome

    Directory of Open Access Journals (Sweden)

    Umezaki Y

    2016-05-01

    Full Text Available Yojiro Umezaki,1 Miho Takenoshita,2 Akira Toyofuku2 1Psychosomatic Dentistry Clinic, Dental Hospital, 2Psychosomatic Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan Abstract: We report a case of refractory burning mouth syndrome (BMS ameliorated with low dose of aripiprazole. The patient was a 66-year-old female who had suffered from chronic burning pain in her tongue for 13 months. No abnormality associated with the burning sensation was detected in the laboratory tests and the oral findings. Considering the clinical feature and the history together, we diagnosed the burning sensation as BMS. The BMS pain was decreased by aripiprazole (powder 1.0 mg/d, though no other antidepressants had satisfying pain relief. It could be supposed that the efficacy of aripiprazole is caused by dopamine stabilization in this case, and BMS might have a subtype that is reactive to aripiprazole. Further studies are needed to confirm the efficacy of aripiprazole for BMS. Keywords: burning mouth syndrome, low-dose aripiprazole, chronic pain

  4. Breakdown resistance of refractory metals compared to copper

    CERN Document Server

    Taborelli, M; Kildemo, M

    2004-01-01

    The behaviour of Mo, W and Cu with respect to electrical breakdown in ultra high vacuum has been investigated by means of a capacitor discharge method. The maximum stable electric field without breakdown and the field enhancement factor, beta have been measured between electrodes of the same material in a sphere/plane geometry for anode and cathode, respectively. The maximum stable field increases as a function of the number of breakdown events for W and Mo. In contrast, no systematic increase is observed for Cu. The highest values obtained are typically 500 MV/m for W, 350 MV/m for Mo and only 180 MV/m for Cu. This conditioning, found for the refractory metals, corresponds to a simultaneous decrease of beta and is therefore related to the field emission properties of the surface and their modification upon sparking. Accordingly, high beta values and no applicable field increase occur for Cu even after repeated breakdown. The results are compared with RF breakdown experiments [1] performed on prototype 30 GHz...

  5. Effects of ionizing radiation of electrical properites of refractory insulators

    International Nuclear Information System (INIS)

    van Lint, V.A.J.; Bunch, J.M.

    1975-01-01

    The Los Alamos Reference Theta Pinch Reactor (RTPR) requires on the first wall an electrical insulator which will withstand transient high voltage at high temperature 10 sec after severe neutron and ionizing irradiation. Few measurements of electrical parameters for heavily disordered refractory insulators have been reported; estimates are made as to whether breakdown strength or conductivity will be degraded by the irradiation. The approach treats separately short-term ionization effects (free and trapped electrons and holes) and long-term gross damage effects (transmutation products and various lattice defects). The following processes could produce unacceptable conduction across the first wall insulator: (a) delayed electronic conductivity 10 sec after the prompt ionization by bremsstrahlung; (b) prompt electronic conductivity from delayed ionization; (c) electronic breakdown; (d) electronic or ionic conductivity due to thermal motion in the disordered material, possibly leading to thermal breakdown. Worst-case calculations based on lower limits to recombination coefficients limit process (a) to sigma much less than 5 x 10 -14 mho/cm. Data on ionization-induced conductivity in insulators predict for process (b) sigma much less than 10 -8 mho/cm. Electronic breakdown generally occurs at fields well above the 10 5 V/cm required for RTPR. Thermal breakdown is negligible due to the short voltage pulse. Ionic and electronic conduction must be studied theoretically and experimentally in the type of highly disordered materials that result from neutron irradiation of the first wall

  6. Non-Contact Measurements of Creep Properties of Refractory Materials

    Science.gov (United States)

    Lee, Jonghyun; Bradshaw, Richard C.; Hyers, Robert W.; Rogers, Jan R.; Rathz, Thomas J.; Wall, James J.; Choo, Hahn; Liaw, Peter

    2006-01-01

    State-of-the-art technologies for hypersonic aircraft, nuclear electric/thermal propulsion for spacecraft, and more efficient jet engines are driving ever more demanding needs for high-temperature (>2000 C) materials. At such high temperatures, creep rises as one of the most important design factors to be considered. Since conventional measurement techniques for creep resistance are limited to about 17OO0C, a new technique is in demand for higher temperatures. This paper presents a non-contact method using electrostatic levitation (ESL) which is applicable to both metallic and non-metallic materials. The samples were rotated quickly enough to cause creep deformation by centrifugal acceleration. The deformation of the samples was captured with a high speed camera and then the images were analyzed to estimate creep resistance. Finite element analyses were performed and compared to the experiments to verify the new method. Results are presented for niobium and tungsten, representative refractory materials at 2300 C and 2700 C respectively.

  7. Thermionic emission of cermets made of refractory carbides

    International Nuclear Information System (INIS)

    Samsonow, G.W.; Bogomol, I.W.; Ochremtschuk, L.N.; Podtschernjajewa, I.A.; Fomenko, W.S.

    1975-01-01

    In order to improve the resistance to thermal variations of refractory carbides having good behavior for thermionic emission, they have been combined with transition metals d. Thermionic emission was studied with cermets in compact samples. Following systems were examined: TiC-Nb, TiC-Mo, TiC-W, ZrC-Nb, ZrC-Mo, ZrC-W, WC-Mo with compositions of: 75% M 1 C-25% M 2 , 50%M 1 C-50%M 2 , 25%M 1 C-75%M 2 . When following the variation of electron emission energy phi versus the composition, it appears that in the range of mixed crystals (M 1 M 2 )C, phi decreases and the resistance to thermal variations of these phases is higher than that of individual carbides. The study of obtained cermets shows that their resistance to thermal variations is largely superior to the one of starting carbides; TiC and ZrC carbides, combined with molybdenum and tungsten support the highest number of thermic cycles

  8. Update of Inpatient Treatment for Refractory Chronic Daily Headache.

    Science.gov (United States)

    Lai, Tzu-Hsien; Wang, Shuu-Jiun

    2016-01-01

    Chronic daily headache (CDH) is a group of headache disorders, in which headaches occur daily or near-daily (>15 days per month) and last for more than 3 months. Important CDH subtypes include chronic migraine, chronic tension-type headache, hemicrania continua, and new daily persistent headache. Other headaches with shorter durations (headache and various psychiatric disorders, such as depression and anxiety. Indications of inpatient treatment for CDH patients include poor responses to outpatient management, need for detoxification for overuse of specific medications (particularly opioids and barbiturates), and severe psychiatric comorbidities. Inpatient treatment usually involves stopping acute pain, preventing future attacks, and detoxifying medication overuse if present. Multidisciplinary integrated care that includes medical staff from different disciplines (e.g., psychiatry, clinical psychology, and physical therapy) has been recommended. The outcomes of inpatient treatment are satisfactory in terms of decreasing headache intensity or frequency, withdrawal from medication overuse, reducing disability, and improving life quality, although long-term relapse is not uncommon. In conclusion, inpatient treatment may be useful for select patients with refractory CDH and should be incorporated in a holistic headache care program.

  9. Botulinum toxin in the treatment of refractory vaginismus.

    Science.gov (United States)

    Ghazizadeh, Shirin; Nikzad, Masoomeh

    2004-11-01

    To investigate the efficacy of botulinum toxin injection to treat women with moderate and severe vaginismus. Twenty-four women referred to our clinic from February 2002 to February 2004 (mean age 25 years; range 19-34 years) with third- to fourth-degree vaginismus were recruited for this study. These women had previous unsuccessful treatments. Botulinum toxin (150-400 mIU) was injected into the puborectalis muscles in 3 sites on each side of the vagina. Twenty-three patients (95.8%) had vaginal examinations 1 week postoperatively that showed little or no vaginismus, 18 (75%) achieved satisfactory intercourse after the first injection, 4 (16.7%) had mild pain, 1 was cured after a second injection, 1 patient refused vaginal examination and did not attempt to have coitus, and another had no coitus as a result of her husband's secondary impotence. The women were followed up for a mean of 12.3 months (range 2-24 months), and there were no cases of recurrence. In refractory cases of vaginismus when conventional therapies have failed, local injection of botulinum toxin can be considered. III.

  10. Bee venom treatment for refractory postherpetic neuralgia: a case report.

    Science.gov (United States)

    Lee, Seung Min; Lim, Jinwoong; Lee, Jae-Dong; Choi, Do-Young; Lee, Sanghoon

    2014-03-01

    Bee venom has been reported to have antinociceptive and anti-inflammatory effects in experimental studies. However, questions still remain regarding the clinical use of bee venom. This report describes the successful outcome of bee venom treatment for refractory postherpetic neuralgia. A 72-year-old Korean man had severe pain and hypersensitivity in the region where he had developed a herpes zoster rash 2 years earlier. He was treated with antivirals, painkillers, steroids, and analgesic patches, all to no effect. The patient visited the East-West Pain Clinic, Kyung Hee University Medical Center, to receive collaborative treatment. After being evaluated for bee venom compatibility, he was treated with bee venom injections. A 1:30,000 diluted solution of bee venom was injected subcutaneously along the margins of the rash once per week for 4 weeks. Pain levels were evaluated before every treatment, and by his fifth visit, his pain had decreased from 8 to 2 on a 10-point numerical rating scale. He experienced no adverse effects, and this improvement was maintained at the 3-month, 6-month, and 1-year phone follow-up evaluations. Bee venom treatment demonstrates the potential to become an effective treatment for postherpetic neuralgia. Further large-sample clinical trials should be conducted to evaluate the overall safety and efficacy of this treatment.

  11. Alkaline autoclave leaching of refractory uranium-thorium minerals

    International Nuclear Information System (INIS)

    Milani, S. A.; Sam, S.

    2011-01-01

    This paper deals with the study of an innovative method for processing the Oman placer ores by alkaline leaching in ball mill autoclaves, where grinding and leaching of the refractory minerals take place simultaneously. This was followed by the selective separation of thorium and uranium from lanthanides by autoclave leaching of the hydroxide cake with ammonium carbonate-bicarbonate solutions. The introduced method is based on the fact that thorium and uranium form soluble carbonate complexes with ammonium carbonate, while lanthanides form sparingly soluble double carbonates. It was found that a complete alkaline leaching of Oman placer ores (98.0 P ercent ) was attained at 150 and 175 d egree C within 2.5 and 2h, respectively. Oman placer ores leaching was intensified and accelerated in a ball mill autoclaves as a result of the grinding action of steel balls, removal of the hydroxide layer covering ores grains and the continuous contact of fresh ore grains with alkaline solution. The study of selective carbonate processing of hydroxide cake with ammonium carbonate-bicarbonate solutions on autoclave under pressure revealed that the complete thorium recovery (97.5 P ercent ) with uranium recovery (90.8 P ercent ) and their separation from the lanthanides were attained at 70-80 d egree C during l-2h. The extraction of lanthanides in carbonate solution was low and did not exceed 4.6 P ercent .

  12. Nanostructure formation on refractory metal surfaces irradiated by helium plasmas

    International Nuclear Information System (INIS)

    Takamura, Shuichi; Kajita, Shin; Ohno, Noriyasu

    2013-01-01

    Helium defects on plasma-facing refractory metals like tungsten have been studied in fusion sciences from the view point of the effects on metal surface properties, concentrating on the bubble formation. However, the surface morphology over the lower surface temperature range was found recently to be changed drastically, something like cotton down or arborescence, sometimes called as “fuzz”. The formation process, although still open problem, would be discussed in terms of viscoelastic model with the effect of surface tension, taking account of its thermal properties and nano-bubbles inside the thin fibers. Some physical surface characteristics like electron emission, radiation emissivity and sputtering are quite influenced by its forest-like structure. Unipolar arcing has been newly studied by using such a surface structure which makes its initiation controllable. In the present report, other examples of nanostructure formation in a variety of particle incident conditions have been introduced as well as the possibility of its industrial applications to enhance interdisciplinary interests. (author)

  13. A Study of Super Refractory Status Epilepticus from India.

    Science.gov (United States)

    Misra, Usha K; Kalita, Jayantee; Dubey, Deepanshu

    2017-01-01

    Super refractory status epilepticus (SRSE) is an important and recently recognized neurological emergency. In view of paucity of studies on SRSE, we report the frequency, etiology and outcome of SRSE. In a hospital-based observational study during 2013 to 2016, consecutive patients with SRSE [persistence of status epilepticus (SE) for 24 h or more, or recurrence of SE on weaning of intravenous anesthetic] were included. The demographic, clinical, and laboratory data were obtained and the severity of SE was defined using Status Epilepticus Severity Score (STESS). The outcome was defined as control of SE, hospital death, and functional status at the time of discharge. Fourteen (13%) patients developed SRSE. Their median age was 27.5 (2-70) years and four were below 18 years of age. The etiology of SRSE was metabolic encephalopathy and encephalitis in five patients each, cerebral venous sinus thrombosis in one and miscellaneous disorders in three patients. Six (43%) patients died. The patients with SRSE had higher admission STESS ( p  = 0.04), and longer intensive care unit ( p  < 0.01) and hospital ( p  = 0.004) stay compared to non-SRSE group. The patients with treatable etiology had better outcome. SRSE occurred in 13% patients with SE and 43% of them died. The SRSE patients with treatable etiology had a better outcome.

  14. Remission Achieved in Refractory Advanced Takayasu Arteritis Using Rituximab

    Directory of Open Access Journals (Sweden)

    D. Ernst

    2012-01-01

    Full Text Available A 25-year-old patient was referred due to subclavian stenosis, identified on echocardiography. She presented with exertional dizziness and dyspnoea. Questioning revealed bilateral arm claudication. Examination demonstrated an absent right ulnar pulse and asymmetrical brachial blood pressure. Bruits were evident over both common carotid arteries. Doppler ultrasound and MRI angiograms revealed occlusion or stenosis in multiple large arteries. Takayasu arteritis (TA was diagnosed and induction therapy commenced: 1 mg/kg oral prednisolone and 500 mg/m2 intravenous cyclophosphamide (CYC. Attempts to reduce prednisolone below 15 mg/d proved impossible due to recurring disease activity. Adjuvant azathioprine 100 mg/d was subsequently added. Several weeks later, the patient was admitted with a left homonymous hemianopia. The culprit lesion in the right carotid artery was surgically managed and the patient discharged on azathioprine 150 mg/d and prednisolone 30 mg/d. Despite this, deteriorating exertional dyspnoea and angina pectoris were reported. Reimaging confirmed new stenosis in the right pulmonary artery. Surgical treatment proved infeasible. Given evidence of refractory disease activity on maximal standard therapy, we initiated rituximab, based on recently reported B-cell activity in TA.

  15. Aerodynamic levitator furnace for measuring thermophysical properties of refractory liquids.

    Science.gov (United States)

    Langstaff, D; Gunn, M; Greaves, G N; Marsing, A; Kargl, F

    2013-12-01

    The development of novel contactless aerodynamic laser heated levitation techniques is reported that enable thermophysical properties of refractory liquids to be measured in situ in the solid, liquid, and supercooled liquid state and demonstrated here for alumina. Starting with polished crystalline ruby spheres, we show how, by accurately measuring the changing radius, the known density in the solid state can be reproduced from room temperature to the melting point at 2323 K. Once molten, by coupling the floating liquid drop to acoustic oscillations via the levitating gas, the mechanical resonance and damping of the liquid can be measured precisely with high-speed high-resolution shadow cast imaging. The resonance frequency relates to the surface tension, the decay constant to the viscosity, and the ellipsoidal size and shape of the levitating drop to the density. This unique instrumentation enables these related thermophysical properties to be recorded in situ over the entire liquid and supercooled range of alumina, from the boiling point at 3240 K, until spontaneous crystallization occurs around 1860 K, almost 500 below the melting point. We believe that the utility that this unique instrumentation provides will be applicable to studying these important properties in many other high temperature liquids.

  16. Collosion and Absorption Behaviors of Inclusions on Refractory

    Directory of Open Access Journals (Sweden)

    Ding-Guo Z.

    2017-06-01

    Full Text Available The paper is dedicated to analysis the inclusion behavior in steel using theoretical calculation and simulation of water. The aim is to establish collision and absorption model of inclusions on refractory. The article discusses the variation of critical stay speed and critical shear with the radius of inclusions in the process of colliding, rebounding and absorbing. The results show the critical stay speed and critical shear of alumina respectively surpasses 1 cm·s−1 and 1 N·m−2, while titanium dioxide separately exceeds 4 cm·s−1 and 10 N·m−2 for the inclusions that radius is less than 2.5 μm. If the inclusions occur rebound after colliding, the inclusions that radius is less than 7 μm will still be absorbed by the surface, while the inclusions that radius is more than 10 μm can easily reenter the steel. The model coincides with the water simulation results and it is of good adaptability.

  17. Electrolysis with diamond anodes: Eventually, there are refractory species!

    Science.gov (United States)

    Mena, Ismael F; Cotillas, Salvador; Díaz, Elena; Sáez, Cristina; Rodríguez, Juan J; Cañizares, P; Mohedano, Ángel F; Rodrigo, Manuel A

    2018-03-01

    In this work, synthetic wastewater polluted with ionic liquid 1-butyl-3-methylimidazolium (Bmim) bis(trifluoromethanesulfonyl)imide (NTf 2 ) undergoes four electrolytic treatments with diamond anodes (bare electrolysis, electrolysis enhanced with peroxosulfate promoters, irradiated with UV light and with US) and results obtained were compared with those obtained with the application of Catalytic Wet Peroxide Oxidation (CWPO). Despite its complex heterocyclic structure, Bmim + cation is successfully depleted with the five technologies tested, being transformed into intermediates that eventually can be mineralized. Photoelectrolysis attained the lowest concentration of intermediates, while CWPO is the technology less efficient in their degradation. However, the most surprising result is that concentration of NTf 2 - anion does not change during the five advanced oxidation processes tested, pointing out its strong refractory character, being the first species that exhibits this character in wastewater undergoing electrolysis with diamond. This means that the hydroxyl and sulfate radicals mediated oxidation and the direct electrolysis are inefficient for breaking the C-S, C-F and S-N bounds of the NTf 2 - anion, which is a very interesting mechanistic information to understand the complex processes undergone in electrolysis with diamond. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Refractory Lactic Acidosis in Small Cell Carcinoma of the Lung

    Directory of Open Access Journals (Sweden)

    Daniel J. Oh

    2017-01-01

    Full Text Available Background. Elevated lactate levels in critically ill patients are most often thought to be indicative of relative tissue hypoxia or type A lactic acidosis. Shock, severe anemia, and thromboembolic events can all cause elevated lactate due to tissue hypoperfusion, as well as the mitochondrial dysfunction thought to occur in sepsis and other critically ill states. Malignancy can also lead to elevation in lactate, a phenomenon described as type B lactic acidosis, which is much less commonly encountered in the critically ill. Case Presentation. We present the case of a 73-year-old Caucasian woman with type 2 diabetes and hypertension who presented with abdominal pain, nausea, vomiting, nonbloody diarrhea, and weight loss over five weeks and was found to have unexplained refractory lactic acidosis despite fluids and antibiotics. She was later diagnosed with small cell carcinoma of the lung. Conclusions. In this case report, we describe a critically ill patient whose elevated lactate was incorrectly attributed to her acute illness, when in truth it was an indicator of an underlying, as yet undiagnosed, malignancy. We believe this case is instructive to the critical care clinician as a reminder of the importance of considering malignancy on the differential diagnosis of a patient presenting with elevated lactate out of proportion to their critical illness.

  19. Chemical vapor deposition of refractory metals and ceramics III

    International Nuclear Information System (INIS)

    Gallois, B.M.; Lee, W.Y.; Pickering, M.A.

    1995-01-01

    The papers contained in this volume were originally presented at Symposium K on Chemical Vapor Deposition of Refractory Metals and Ceramics III, held at the Fall Meeting of the Materials Research Society in Boston, Massachusetts, on November 28--30, 1994. This symposium was sponsored by Morton International Inc., Advanced Materials, and by The Department of Energy-Oak Ridge National Laboratory. The purpose of this symposium was to exchange scientific information on the chemical vapor deposition (CVD) of metallic and ceramic materials. CVD technology is receiving much interest in the scientific community, in particular, to synthesize new materials with tailored chemical composition and physical properties that offer multiple functionality. Multiphase or multilayered films, functionally graded materials (FGMs), ''smart'' material structures and nanocomposites are some examples of new classes of materials being produced via CVD. As rapid progress is being made in many interdisciplinary research areas, this symposium is intended to provide a forum for reporting new scientific results and addressing technological issues relevant to CVD materials and processes. Thirty four papers have been processed separately for inclusion on the data base

  20. Methodology for Life Testing of Refractory Metal / Sodium Heat Pipes

    International Nuclear Information System (INIS)

    Martin, James J.; Reid, Robert S.

    2006-01-01

    This work establishes an approach to generate carefully controlled data to find heat pipe operating life with material-fluid combinations capable of extended operation. To accomplish this goal acceleration is required to compress 10 years of operational life into 3 years of laboratory testing through a combination of increased temperature and mass fluence. Specific test series have been identified, based on American Society for Testing and Materials (ASTM) specifications, to investigate long-term corrosion rates. The refractory metal selected for demonstration purposes is a molybdenum-44.5% rhenium alloy formed by powder metallurgy. The heat pipes each have an annular crescent wick formed by hot isostatic pressing of molybdenum-rhenium wire mesh. The heat pipes are filled by vacuum distillation with purity sampling of the completed assembly. Round-the-clock heat pipe tests with 6-month destructive and non-destructive inspection intervals are conducted to identify the onset and level of corrosion. Non-contact techniques are employed to provide power to the evaporator (radio frequency induction heating at 1 to 5 kW per heat pipe) and calorimetry at the condenser (static gas gap coupled water cooled calorimeter). The planned operating temperature range extends from 1123 to 1323 K. Accomplishments before project cancellation included successful development of the heat pipe wick fabrication technique, establishment of all engineering designs, baseline operational test requirements, and procurement/assembly of supporting test hardware systems. (authors)

  1. Morphometric brain characterization of refractory obsessive-compulsive disorder: diffeomorphic anatomic registration using exponentiated Lie algebra.

    Science.gov (United States)

    Tang, Wanjie; Li, Bin; Huang, Xiaoqi; Jiang, Xiaoyu; Li, Fei; Wang, Lijuan; Chen, Taolin; Wang, Jinhui; Gong, Qiyong; Yang, Yanchun

    2013-10-01

    Few studies have used neuroimaging to characterize treatment-refractory obsessive-compulsive disorder (OCD). This study sought to explore gray matter structure in patients with treatment-refractory OCD and compare it with that of healthy controls. A total of 18 subjects with treatment-refractory OCD and 26 healthy volunteers were analyzed by MRI using a 3.0-T scanner and voxel-based morphometry (VBM). Diffeomorphic anatomical registration using exponentiated Lie algebra (DARTEL) was used to identify structural changes in gray matter associated with treatment-refractory OCD. A partial correlation model was used to analyze whether morphometric changes were associated with Yale-Brown Obsessive-Compulsive Scale scores and illness duration. Gray matter volume did not differ significantly between the two groups. Treatment-refractory OCD patients showed significantly lower gray matter density than healthy subjects in the left posterior cingulate cortex (PCC) and mediodorsal thalamus (MD) and significantly higher gray matter density in the left dorsal striatum (putamen). These changes did not correlate with symptom severity or illness duration. Our findings provide new evidence of deficits in gray matter density in treatment-refractory OCD patients. These patients may show characteristic density abnormalities in the left PCC, MD and dorsal striatum (putamen), which should be verified in longitudinal studies. © 2013. Published by Elsevier Inc. All rights reserved.

  2. Enhancement of the life of refractories through the operational experience of plasma torch melter

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Young Pyo [Technology Institute, Korea Radioactive waste Agency (KORAD), Daejeon (Korea, Republic of); Choi, Jaang Young [Chungnam National University, Daejeon (Korea, Republic of)

    2016-06-15

    The properties of wastes for melting need to be considered to minimize the maintenance of refractory and to discharge the molten slags smoothly from a plasma torch melter. When the nonflammable wastes from nuclear facilities such as concrete debris, glass, sand, etc., are melted, they become acid slags with low basicity since the chemical composition has much more acid oxides than basic oxides. A molten slag does not have good characteristics of discharge and is mainly responsible for the refractory erosion due to its low liquidity. In case of a stationary plasma torch melter with a slant tapping port on the wall, a fixed amount of molten slags remains inside of tapping hole as well as the melter inside after tapping out. Nonmetallic slags keep the temperature higher than melting point of metal because metallic slags located on the bottom of melter by specific gravity difference are simultaneously melted when dual mode plasma torch operates in transferred mode. In order to minimize the refractory erosion, the compatible refractories are selected considering the temperature inside the melter and the melting behavior of slags whether to contact or noncontact with molten slags. An acidic refractory shall not be installed in adjacent to a basic refractory for the resistibility against corrosion.

  3. Preparation and characterization of clay bonded high strength silica refractory by utilizing agriculture waste

    International Nuclear Information System (INIS)

    Bhardwaj, A.; Hossain, S.K.S.; Majh, M.R.

    2017-01-01

    Clay bonded silica refractory was prepared by utilizing agriculture waste called rice husk ash (RHA) and refractory grog. Various samples were prepared with different compositions based upon partial replacement of quartz by RHA. Rectangular samples were prepared by following semi dry process prior to pressing in a uniaxial hydraulic press and sintering at a temperature of 1200°C in air atmosphere. Various physical, mechanical and thermal characterizations were done like X-ray diffraction (XRD), scanning electron microscope (SEM), apparent porosity (AP), bulk density (BD), cold crushing strength (CCS), refractoriness and thermal conductivity measurement. The sample utilizing 30% of RHA was considered most optimum composition which produced cold crushing strength of 38MPa and thermal conductivity of 2.08W/mK at 800°C with a considerable good refractoriness. Enhancement in the mechanical as well as thermal properties may be considered as attributed to the amorphous silica which has reacted more easily and efficiently with other material surrounding giving rise to the densification and produced stable crystalline phase to the refractory material. These promising characteristics suggests that the RHA may lead to be used as a potential material for the preparation of clay bonded high strength silica refractories. [es

  4. Reuse of ultrafine mineral wool production waste in the manufacture of refractory concrete.

    Science.gov (United States)

    Stonys, R; Kuznetsov, D; Krasnikovs, A; Škamat, J; Baltakys, K; Antonovič, V; Černašėjus, O

    2016-07-01

    The paper deals with the mineral wool production waste (cupola dust - CD), presents CD characterization and aims to reuse CD in production of refractory concrete with calcium aluminate cement. The study of CD covers its chemical, phase and thermal analyses along with the morphological study and determination of particles size distribution. Zeta-potential, electrical conductivity and pH values of CD suspension are presented in the paper as well. Commercial microsilica additive in refractory concrete has been replaced with cupola dust. Compositions of refractory concrete have been prepared by incorporating 1%, 2% and 3% of CD. The bulk density, ultrasonic wave velocity, cold crushing strength and thermal shock resistance of the created refractory concrete have been determined. Based on experimental results, it has been found that cupola dust may be used for the production of refractory concrete. The environmental impact related to the CD reuse in refractory concrete production has been evaluated as well. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Tioguanine in the treatment of refractory coeliac disease--a single centre experience.

    Science.gov (United States)

    Tack, G J; van Asseldonk, D P; van Wanrooij, R L J; van Bodegraven, A A; Mulder, C J

    2012-08-01

    Refractory coeliac disease type I is a complicated form of coeliac disease characterised by primary or secondary resistance to a gluten-free diet with persisting or reoccurring intestinal villous atrophy and symptoms of malabsorption. Besides corticosteroids, azathioprine has been advocated for the treatment of refractory coeliac disease type I. However, tioguanine (TG) might be better tolerated and more efficacious owing to a simpler metabolism towards bioactivation. To evaluate tolerability and effectiveness of the nonconventional thiopurine derivative TG in refractory coeliac disease type I. Refractory coeliac disease type I patients treated with TG between June 2001 and November 2010 with a follow-up period of at least 1 year were included. Adverse events, laboratory values, 6-thioguanine nucleotide concentrations and rates of both clinical and histological response were evaluated at baseline and during follow-up. Twelve adult refractory coeliac disease type I patients were included. The median TG treatment duration was 14 months. Ten patients tolerated TG treatment on the long term, whereas two patients withdrew treatment due to adverse events. No nodular regenerative hyperplasia of the liver was observed. During follow-up clinical and histological response was observed in 83% and 78%, respectively. Corticosteroid dependency decreased by 50%. Tioguanine appears to be a convenient drug for the treatment of refractory coeliac disease type I based on higher histological and similar clinical response rates as compared with historical conventional therapies. © 2012 Blackwell Publishing Ltd.

  6. When myasthenia gravis is deemed refractory: clinical signposts and treatment strategies

    Science.gov (United States)

    Mantegazza, Renato; Antozzi, Carlo

    2018-01-01

    The prognosis for patients with myasthenia gravis (MG) has improved significantly over the past half century, including substantial reductions in mortality and morbidity. However, approximately 10% of patients fails to respond adequately to current therapies and are considered treatment refractory, or treatment intolerant, and up to 80% have disease that fails to achieve complete stable remission. Although patients with autoantibodies to muscle-specific tyrosine kinase (anti-MuSK positive) are more likely to become treatment refractory than those with autoantibodies to the acetylcholine receptor (anti-AChR positive), each of these serotypes is substantially represented in the refractory MG population. Other risk factors for becoming treatment refractory include history of thymoma or thymectomy and female sex. A modified treatment algorithm for MG is proposed: patients who have disease that fails to respond to the stepwise approach to therapy, are treatment intolerant, or who require chronic rescue measures despite ongoing therapy, should be considered treatment refractory and emerging therapies should be considered. Three emerging monoclonal antibody-based therapies are discussed: the anti-B-cell agent rituximab; the terminal complement activation inhibitor eculizumab; and belimumab, which targets B-cell activating factor. Increased understanding of molecular pathophysiology and accurate antibody subtyping in MG should lead to the use of new therapeutic agents and successful management of treatment-refractory patients. PMID:29403543

  7. Refractory Research Group - U.S. DOE, Albany Research Center [Institution Profile

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, James P.

    2004-09-01

    The refractory research group at the Albany Research Center (ARC) has a long history of conducting materials research within the U.S. Bureau of Mines, and more recently, within the U.S. Dept. of Energy. When under the U.S. Bureau of Mines, research was driven by national needs to develop substitute materials and to conserve raw materials. This mission was accomplished by improving refractory material properties and/or by recycling refractories using critical and strategic materials. Currently, as a U.S. Dept of Energy Fossil Energy field site, research is driven primarily by the need to assist DOE in meeting its vision to develop economically and environmentally viable technologies for the production of electricity from fossil fuels. Research at ARC impacts this vision by: • Providing information on the performance characteristics of materials being specified for the current generation of power systems; • Developing cost-effective, high performance materials for inclusion in the next generation of fossil power systems; and • Solving environmental emission and waste problems related to fossil energy systems. A brief history of past refractory research within the U.S. Bureau of Mines, the current refractory research at ARC, and the equipment and capabilities used to conduct refractory research at ARC will be discussed.

  8. Stable isotopes labelled compounds

    International Nuclear Information System (INIS)

    1982-09-01

    The catalogue on stable isotopes labelled compounds offers deuterium, nitrogen-15, and multiply labelled compounds. It includes: (1) conditions of sale and delivery, (2) the application of stable isotopes, (3) technical information, (4) product specifications, and (5) the complete delivery programme

  9. Study of the degradation in aqueous solution of a refractory organic compound: avermectin type used as pesticide in agriculture.

    Science.gov (United States)

    Boukhrissa, Athir; Ferrag-Siagh, Fatiha; Rouidi, Lina-Mounia; Chemat, Smaïn; Aït-Amar, Hamid

    2017-10-01

    We examined the removal of abamectin by the electro-Fenton (EF) process and the feasibility of biological treatment after degradation. The effect of the operating parameters showed that abamectin (Aba) degradation was enhanced with increasing temperature. Response surface analysis of the central composite design led to the following optimal conditions for the abatement of chemical oxygen demand: 45.5 °C, 5 mg L -1 , 150 mA, and 0.15 mmol L -1 for the temperature, initial Aba concentration, current intensity, and catalyst concentration, respectively. Under these conditions, 68.01% of the organic matter was removed and 94% of Aba was degraded after 5 h and 20 min of electrolysis, respectively. A biodegradability test, which was performed on a solution electrolyzed at 47 °C, 9 mg L -1 , 150 mA, and 0.15 mmol L -1 , confirms that the ratio of biological oxygen demand/chemical oxygen demand increased appreciably from 0.0584 to 0.64 after 5 h of electrolysis. This increased ratio is slightly above the limit of biodegradability (0.4). These results show the relevance of the EF process and its effectiveness for abamectin degradation. We conclude that biological treatment can be combined with the EF process for total mineralization.

  10. Analyses of volatile organic compounds and refractory organic residues coming from the heating of interstellar ice analogues

    Directory of Open Access Journals (Sweden)

    Danger Grégoire

    2014-02-01

    Full Text Available We use Very High Resolution Mass Spectrometry for analyses of the soluble fraction of yellow stuff produced in laboratory. Their analyses show that they are composed of molecules with high molecular weight (m/z>4000. Fragmentations suggest that grafted molecules constitute a part of them. Hexamethylenetetramine derivatives have also been detected. First results and further analytical developments will be presented to facilitate the understanding of the residue composition and of its chemical evolution. Furthermore, we present for the first time the concept of the VAHIIA project which concerns the analysis of volatiles coming from the heating of interstellar ice analogues.

  11. Compounding around the world.

    Science.gov (United States)

    Vail, Jane

    2008-01-01

    Pharmaceutical compounding is universal in its prevalence. Variations in disease patterns, culture, and tradition; the role of government in health care; and the availability of essential equipment and required agents shape a compounding profile unique to each country worldwide. In the following reflections, pharmacists form Argentina, Belgium, Colombia, Germany, Puerto Rico, Spain, and the United States describe their experiences in the compounding setting unique to their practice and their nation. The unifying theme in their comments is the dedication of each contributor to enabling recovery and ensuring the good health of his or her clients.

  12. Radiation therapy treatment of acute refractory renal allograft rejection

    International Nuclear Information System (INIS)

    Godinez, J.; Thisted, R.A.; Woodle, E.S.; Thistlethwaite, J.R.; Powers, C.; Haraf, D.

    1996-01-01

    radiation treatment (median 4, range 1-22), number of transplants (one transplant in 77 %), and concomitant immunosuppressive therapy. Independent factors by the Cox regression model were: Sex (P=0.005), Creatinine levels (P=0.000), HLA-DR (P=0.05), PRA-Max > 70% (P=0.014). Each factor was scored using the integral coefficients to generate four different groups. The overall actuarial graft survival from the initiation of RT was 83% at 1 month, 60% at 1 year and 36% at 5 years. The Kaplan-Meier survival analyzed by groups seems to produce an interpretable separation of the risk factors for graft loss. The number of rejections of pre-RT range from 1-6 (median 2) and post-RT range from 0-3 (median 0). Conclusions: Our experience indicates that radiation therapy provides effective treatment for acute refractory renal allograft rejection. The response to radiation therapy in patients treated with acute refractory renal graft rejection can be predicted by a new scoring system

  13. Hormonotherapy and chemotherapy in hormone refractory prostate cancer

    International Nuclear Information System (INIS)

    Droz, J.

    2004-01-01

    The median survival of patients with metastatic prostate cancer is 3 years, though it is only one year when the tumor is hormone refractory (HRPC). The number of possible problems is great, but the major one is pain. The number of therapeutics is also great. They have only palliative and symptomatic impact. Early hormone suppression in patients with advanced disease may have slight survival impact. Thus, a general scheme of management can be proposed, based on several principles: 1- Early hormone suppression is proposed is metastatic prostate cancer. Hormone suppression is castration or LH-RH agonist. 2- Powerful tools must be used to measure palliative impact: pain and analgesic scales, quality of life evaluation. PSA decrease may only be a surrogate of clinical response evaluation. 3- After first line hormone suppression, indication of further hormone therapy, chemotherapy and radio pharmaceutics is based only on symptomatic progression. It is not based on tumor progression as measured by PSA increase or metastasis evolution, because it is well established that, till now, treatment has only palliative effect. 4- Management of local problems (urinary obstruction, fracture, nerve compression) must be done depending on the situation. 4- Patients must be clearly informed of the palliative end-points, of the therapeutic tools, of the current side effects and goals of treatments. The strategy must be prospectively explained at the early beginning of treatment. Chemotherapy has become a standard treatment in HRPC because it has shown palliative improvement (Mitoxantrone studies), and more recently survival improvement (Docetaxel studies). However new drugs are under development. It will be focussed on drugs acting on EGF-receptor, endothelin-A, proteasome and V EGF. Practical management of HRPC will be discussed

  14. Study of refractory status epilepticus from a tertiary care center

    Directory of Open Access Journals (Sweden)

    Sahil Kohli

    2017-01-01

    Full Text Available Objectives: To determine the proportion of refractory status epilepticus (RSE and super-RSE (SRSE among patients with status epilepticus (SE and to analyze RSE and non-RSE (NRSE in terms of etiology and predictors for RSE. Materials and Methods: Patients were identified from discharge summaries database with keywords of SE and records of the portable electroencephalogram (EEG machine from January 2011 to March 2016. Results: Two hundred and eighteen events were included in the study with 114 (52.3% males, bimodal age preponderance age <5 years 30%, and second peak in age 15–65 years 52.8%, preexisting seizures were present in 34.4% (n = 75. Nearly 77.1% had NRSE (n = 168 and 22.9% had RSE (n = 50. This included 17 patients with SRSE (n = 17, 7.8% of all SE. Central nervous system (CNS infection was a single largest etiological group in SE (69/218, 31.7%. In RSE, autoimmune encephalitis (17/50 and CNS infection (13/50 were the largest groups. De novo seizures (P = 0.007, low sensorium at admission (P = 0.001, low albumin at admission (P = 0.002, and first EEG being abnormal (P = 0.001 were risk factors on bivariate analysis. An unfavorable status epilepticus severity score (STESS was predictive for RSE (P = 0.001. On multivariate analysis, de novo seizures (P = 0.009 and abnormal EEG at admission (P = 0.03 were predictive for RSE. Conclusions: Fifty patients had RSE (22.9%, of which 17 went on to become SRSE (7.8%. Unfavorable STESS score was predictive for RSE on bivariate analysis. On multivariate analysis, de novo seizures and abnormal initial EEG were predictors of RSE.

  15. Minoxidil-associated anorexia in an infant with refractory hypertension.

    Science.gov (United States)

    Vesoulis, Zachary A; Attarian, Stephanie J; Zeller, Brandy; Cole, Francis Sessions

    2014-12-01

    Minoxidil is a potent antihypertensive used as an adjunctive agent in refractory hypertension. It exerts an antihypertensive effect through two mechanisms: selective arterial vasodilation by activation of potassium channels in the vascular smooth muscle and stimulation of carotid and aortic baroreceptors, leading to downstream release of renin and norepinephrine. Although frequently cited in reviews of antihypertensive agents, limited data about the use of minoxidil in neonates are available. We describe an infant girl, born at 35 weeks of gestation, who was diagnosed with idiopathic hypertension after extensive diagnostic evaluation. Adequate blood pressure control was not achieved with captopril, amlodipine, and clonidine. Oliguria secondary to captopril and rapid-onset congestive heart failure due to persistent hypertension led to the introduction of intravenous agents labetalol and nitroprusside. Although adequate blood pressure control was achieved, attempts to transition back to oral agents were unsuccessful, prompting the use of minoxidil as an alternative agent. Although good blood pressure control was achieved, the infant's oral intake plummeted from 210 to 63 ml/kg/day. The anorexia quickly resolved after stopping minoxidil, and she was discharged home at 5 months of age receiving propranolol, amlodipine, and doxazosin. Use of the Naranjo adverse drug reaction probability scale indicated a definite relationship (score of 10) between the patient's development of anorexia and minoxidil therapy. To our knowledge, there have been no previous reports of minoxidil-associated anorexia in preterm or term infants. Clinicians should be aware that anorexia is a possible adverse effect of minoxidil in this patient population when initiating the drug in similar patients. © 2014 Pharmacotherapy Publications, Inc.

  16. Methotrexate: an effective monotherapy for refractory generalized morphea

    Directory of Open Access Journals (Sweden)

    Platsidaki E

    2017-05-01

    Full Text Available Eftychia Platsidaki, Vassiliki Tzanetakou, Anargyros Kouris, Panagiotis G Stavropoulos Department of Dermatology and Venereology, Andreas Syggros Hospital, University of Athens, Athens, Greece Introduction: Morphea is an inflammatory skin disorder characterized by excessive collagen deposition. Although treatment algorithms for morphea subtypes have been suggested, no consistent recommendations are available. This study attempts to evaluate the clinical efficacy of methotrexate (MTX as monotherapy in refractory generalized morphea. Methods: It is a retrospective study, including 20 patients who had already been treated with various topical and systemic therapies with minimal clinical improvement. Patients received orally MTX at a of dosage 15 mg once weekly. Duration of the use, dosage of MTX, and adverse events were recorded. Clinical assessment of skin lesions was performed and documented. Results: The mean disease duration was 27 months before the initiation of MTX treatment. After 12 months of therapy, very good response was achieved in 6 patients (30%, good response in 10 patients (50%, and fair response in 2 patients (10%, while 2 patients (10% had failed treatment. Patients were followed up for a mean time interval of 21 months. No serious adverse event was recorded. Conclusion: MTX has been already proved to be an effective and well-tolerated treatment in pediatric patients with morphea. The majority of the group of adult patients showed very good and good improvement when treated with MTX. Although this is an uncontrolled study, MTX monotherapy was considered a safe and effective treatment for the management of this specific clinical subset of morphea in adults. Keywords: methotrexate, adults, generalized morphea

  17. Stem Cells in the Treatment of Refractory Chronic Migraines

    Directory of Open Access Journals (Sweden)

    Alexander Mauskop

    2017-06-01

    Full Text Available Background: Autologous adipose-derived stromal vascular fraction (SVF, which is rich in mesenchymal stromal cells, has been reported to be effective for the treatment of trigeminal neuropathic pain and chronic migraine and tension-type headaches. It is possible that stem cell activity targets neurogenic inflammation, which is a well-documented aspect of migraine pathogenesis. Methods: Adult patients with severe migraine-related disability as measured by the Migraine Disability Assessment (MIDAS score who failed botulinum toxin injections and at least 3 prophylactic drugs were included in this study. The primary outcome measure was the change in MIDAS score 3 months after treatment. Standard liposuction was performed to obtain adipose tissue, from which SVF was isolated by centrifugation. A sample of each patient’s SVF was tested for the number of nucleated cells and their viability. Between 8 and 10 mL of SVF with 2.5–8.6 million viable cells were injected into the pericranial, neck, and trapezius muscles. Results: One man and 8 women were enrolled in the study. The mean age was 48 years, the mean duration of headaches was 16 years, the mean number of prophylactic drugs tried was 10, and the mean MIDAS score at baseline was 122. Three months after the procedure the mean MIDAS score was 88. Seven out of 9 patients had a decrease in their MIDAS score, but only 2 had meaningful improvement. Conclusion: The use of autologous adipose-derived SVF may be effective in the treatment of chronic refractory migraines. It is possible that the use of allogenic stem cells could offer a more practical and more effective approach.

  18. Effectiveness of intravenous levetiracetam as an adjunctive treatment in pediatric refractory status epilepticus.

    Science.gov (United States)

    Kim, Jon Soo; Lee, Jeong Ho; Ryu, Hye Won; Lim, Byung Chan; Hwang, Hee; Chae, Jong-Hee; Choi, Jieun; Kim, Ki Joong; Hwang, Yong Seung; Kim, Hunmin

    2014-08-01

    Intravenous levetiracetam (LEV) has been shown to be effective and safe in treating adults with refractory status epilepticus (SE). We sought to investigate the efficacy and safety of intravenous LEV for pediatric patients with refractory SE. We performed a retrospective medical-record review of pediatric patients who were treated with intravenous LEV for refractory SE. Clinical information regarding age, sex, seizure type, and underlying neurological status was collected. We evaluated other anticonvulsants that were used prior to administration of intravenous LEV and assessed loading dose, response to treatment, and any adverse events from intravenous LEV administration. Fourteen patients (8 boys and 6 girls) received intravenous LEV for the treatment of refractory SE. The mean age of the patients was 4.4 ± 5.5 years (range, 4 days to 14.6 years). Ten of the patients were neurologically healthy prior to the refractory SE, and the other 4 had been previously diagnosed with epilepsy. The mean loading dose of intravenous LEV was 26 ± 4.6 mg/kg (range, 20-30 mg/kg). Seizure termination occurred in 6 (43%) of the 14 patients. In particular, 4 (57%) of the 7 patients younger than 2 years showed seizure termination. No immediate adverse events occurred during or after infusions. The current study demonstrated that the adjunctive use of intravenous LEV was effective and well tolerated in pediatric patients with refractory SE, even in patients younger than 2 years. Intravenous LEV should be considered as an effective and safe treatment option for refractory SE in pediatric patients.

  19. Refractory heartburn: comparison of intercellular space diameter in documented GERD vs. functional heartburn.

    Science.gov (United States)

    Vela, Marcelo F; Craft, Brandon M; Sharma, Neeraj; Freeman, Janice; Hazen-Martin, Debra

    2011-05-01

    Refractory heartburn despite acid suppression may be explained by ongoing gastroesophageal reflux disease (GERD) or functional heartburn (FH), i.e., symptoms without evidence of GERD. Impedance-pH monitoring (impedance-pH) detects acid and nonacid reflux and is useful for evaluating acid-suppressed, refractory patients. Intercellular space diameter (ISD) of esophageal epithelium measured by transmission electron microscopy (TEM) is a marker of epithelial damage present in both erosive and nonerosive reflux disease. ISD has not been used to study refractory heartburn or FH. Our aim was to compare ISD in healthy controls and refractory heartburn patients with GERD and FH. In refractory heartburn patients (heartburn more than twice/week for at least 2 months despite proton pump inhibitor (PPI) b.i.d.), erosive esophagitis and/or abnormal impedance-pH (increased acid exposure or positive symptom index) defined GERD; normal esophagogastroduodenoscopy (EGD)/impedance-pH defined FH. Asymptomatic, healthy controls had normal EGD and pH-metry. Mean ISD in each subject, determined by blinded TEM of esophageal biopsies, was the average of 100 measurements (10 measurements in each of 10 micrographs). In all, 11 healthy controls, 11 FH, and 15 GERD patients were studied. Mean ISD was significantly higher in GERD compared with controls (0.87 vs. 0.32 μm, P=0.003) and FH (0.87 vs. 0.42 μm, P=0.012). Mean ISD was similar in FH and controls (0.42 vs. 0.32 μm, P=0.1). The proportion of patients with abnormal ISD was significantly higher for GERD compared with FH (60 vs. 9%, P=0.014). ISD is increased in refractory heartburn patients with GERD but not those with FH. Our findings suggest that measurement of ISD by TEM might be a useful tool to distinguish GERD from FH in patients with refractory heartburn.

  20. White-Coat Effect Is Uncommon in Patients With Refractory Hypertension.

    Science.gov (United States)

    Siddiqui, Mohammed; Judd, Eric K; Oparil, Suzanne; Calhoun, David A

    2017-09-01

    Refractory hypertension is a recently described phenotype of antihypertensive treatment failure defined as uncontrolled blood pressure (BP) despite the use of ≥5 different antihypertensive agents, including chlorthalidone and spironolactone. Recent studies indicate that refractory hypertension is uncommon, with a prevalence of ≈5% to 10% of patients referred to a hypertension specialty clinic for uncontrolled hypertension. The prevalence of white-coat effect, that is, uncontrolled automated office BP ≥135/85 mm Hg and controlled out-of-office BP hypertensive patients overall is ≈30% to 40%. The prevalence of white-coat effect among patients with refractory hypertension has not been previously reported. In this prospective evaluation, consecutive patients referred to the University of Alabama at Birmingham Hypertension Clinic for uncontrolled hypertension were enrolled. Refractory hypertension was defined as uncontrolled automated office BP ≥135/85 mm Hg with the use of ≥5 antihypertensive agents, including chlorthalidone and spironolactone. Automated office BP measurements were based on 6 serial readings, done automatically with the use of a BpTRU device unobserved in the clinic. Out-of-office BP measurements were done by 24-hour ambulatory BP monitor. Thirty-four patients were diagnosed with refractory hypertension, of whom 31 had adequate ambulatory BP monitor readings. White-coat effect was present in only 2 patients, or 6.5% of the 31 patients with refractory hypertension, suggesting that white-coat effect is largely absent in patients with refractory hypertension. These findings suggest that white-coat effect is not a common cause of apparent lack of BP control in patients failing maximal antihypertensive treatment. © 2017 American Heart Association, Inc.

  1. Compound Semiconductor Radiation Detectors

    CERN Document Server

    Owens, Alan

    2012-01-01

    Although elemental semiconductors such as silicon and germanium are standard for energy dispersive spectroscopy in the laboratory, their use for an increasing range of applications is becoming marginalized by their physical limitations, namely the need for ancillary cooling, their modest stopping powers, and radiation intolerance. Compound semiconductors, on the other hand, encompass such a wide range of physical and electronic properties that they have become viable competitors in a number of applications. Compound Semiconductor Radiation Detectors is a consolidated source of information on all aspects of the use of compound semiconductors for radiation detection and measurement. Serious Competitors to Germanium and Silicon Radiation Detectors Wide-gap compound semiconductors offer the ability to operate in a range of hostile thermal and radiation environments while still maintaining sub-keV spectral resolution at X-ray wavelengths. Narrow-gap materials offer the potential of exceeding the spectral resolutio...

  2. Hexavalent Chromium Compounds

    Science.gov (United States)

    Learn about chromium, exposure to which can increase your risk of lung cancer and cancer of the paranasal sinuses and nasal cavity. Hexavalent chromium compounds have been used as corrosion inhibitors in a wide variety of products and processes.

  3. MEA 86 Compound data

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data file contains the full raw parameter data for the 86 compounds tested in the developmental MEA assay, as well as Area Under the Curve (AUC) calculations...

  4. Unlock your Compound Management

    OpenAIRE

    Steffen Eller

    2016-01-01

    Pharmaceutical industry faces the increased demand for innovative medicines against various diseases. In this regard, the compound library in pharmaceutical industry is the most valuable asset. However, the compound distribution from the library into the screening plates is often still done manually and binds highly qualified resources to very time-consuming, tedious and error-prone tasks. To overcome these challenges, Chemspeed launched the first automated true one-to-one gravimetric "pi...

  5. Improved cooler design of electric arc furnace refractory in mining industry using thermal analysis modeling and simulation

    International Nuclear Information System (INIS)

    Istadi, I.; Bindar, Y.

    2014-01-01

    Production of steel and nickel using the electric arc furnace should be focused on the intensification of energy. Improvement of energy efficiency of the most consuming facilities was achieved by improving the use of alternative energy minimization such as reducing the heat lost of hot gases, minimizing the heat radiated through refractory linings of metallurgical furnaces, and cooling the highly thermally stressed components. The refractory of electric arc furnace should be modified to achieve the best cooling system of the furnace. In this physical modeling and simulation works, four modification scenarios of wall refractory designs were simulated, i.e. refractory with basic design, refractory with deep plate coolers, refractory with extra plate coolers, and refractory with wall falling film coolers. Finally, the use of deep plate cooler and the existing waffle cooler system was considered to be the best design of efficient electric arc furnace operationally. - Highlights: • Electric arc furnace design should be focused on the intensification of energy. • Refractory of electric arc furnace were modified to achieve the best cooling system. • Four modification scenarios of the wall refractory designs were simulated. • Use of deep plate cooler and existing waffle cooler system is the best cooling

  6. Phenolic Molding Compounds

    Science.gov (United States)

    Koizumi, Koji; Charles, Ted; de Keyser, Hendrik

    Phenolic Molding Compounds continue to exhibit well balanced properties such as heat resistance, chemical resistance, dimensional stability, and creep resistance. They are widely applied in electrical, appliance, small engine, commutator, and automotive applications. As the focus of the automotive industry is weight reduction for greater fuel efficiency, phenolic molding compounds become appealing alternatives to metals. Current market volumes and trends, formulation components and its impact on properties, and a review of common manufacturing methods are presented. Molding processes as well as unique advanced techniques such as high temperature molding, live sprue, and injection/compression technique provide additional benefits in improving the performance characterisitics of phenolic molding compounds. Of special interest are descriptions of some of the latest innovations in automotive components, such as the phenolic intake manifold and valve block for dual clutch transmissions. The chapter also characterizes the most recent developments in new materials, including long glass phenolic molding compounds and carbon fiber reinforced phenolic molding compounds exhibiting a 10-20-fold increase in Charpy impact strength when compared to short fiber filled materials. The role of fatigue testing and fatigue fracture behavior presents some insight into long-term reliability and durability of glass-filled phenolic molding compounds. A section on new technology outlines the important factors to consider in modeling phenolic parts by finite element analysis and flow simulation.

  7. Intraarticular Pulsed Radiofrequency to Treat Refractory Lumbar Facet Joint Pain in Patients with Low Back Pain.

    Science.gov (United States)

    Chang, Min Cheol; Cho, Yun-Woo; Ahn, Da Hyun; Do, Kyung Hee

    2018-04-01

    Many treatment techniques have been used for refractory lumbar facet joint pain; however, their efficacy has been controversial. In this study, we investigated the clinical efficacy and safety of intra-articular pulsed radiofrequency for the treatment of refractory lumbar facet joint pain in patients with low back pain. Twenty patients with refractory lumbar facet joint pain were recruited, and each patient was treated via intra-articular pulsed radiofrequency. The treatment effects were measured with a numerical rating scale, and the technical accuracy of intra-articular pulsed radiofrequency treatment was evaluated independently by 2 radiologists. Any adverse events or complications also were checked. We performed intra-articular pulsed radiofrequency treatment at 48 levels of the lumbar facet joints in 20 patients (5 men and 15 women; mean age, 64.50 ± 10.65 years) with refractory lumbar facet joint pain. Pain scores were significantly reduced at 1 month, 3 months, and 6 months after treatment (P radiofrequency results in all 20 patients, without any serious adverse effects. Treatment using intra-articular pulsed radiofrequency is an alternative to other techniques in patients with refractory lumbar facet joint pain. Copyright © 2018 Elsevier Inc. All rights reserved.

  8. Degradation of Alumina and Magnesia Chrome refractory bricks in Portland cement kiln – Corrected version*

    Directory of Open Access Journals (Sweden)

    Ben Addi K.

    2014-05-01

    Full Text Available In cement plants, the refractory products are particularly confronted to partially liquid oxide phases at temperature ranging between 900°C and 1700°C. All constituents of these products have to resist not only to thermal constraints, but also to the thermochemical solicitations which result from contact material/coating. In order to study the phenomenon of degradation of refractory bricks in cement kilns and to identify the causes of their degradation, we proceed to the examination of industrial cases in cement kiln. Many chemical tests of the degraded refractory bricks have been done and the results acquired were compared to the ones not used. The analysis of the results is doing using different techniques (Loss of ignition, X-ray Fluorescence, X-ray Diffraction. The results show that the degradation of the used bricks in the clinkering and cooling zone is due to the infiltration of aggressive elements such us sulphur, alkali (Na2O, K2O .... The chemical interaction between the Portland clinker phases and refractory material has also an importance on the stability of the coating and consequently on the life of the refractories.

  9. Refractory pulmonary sarcoidosis - proposal of a definition and recommendations for the diagnostic and therapeutic approach.

    Science.gov (United States)

    Korsten, Peter; Strohmayer, Katharina; Baughman, Robert P; Sweiss, Nadera J

    2016-03-01

    Patients with sarcoidosis undergo spontaneous remission or may be effectively controlled with glucocorticoids alone in many cases. Progressive and refractory pulmonary sarcoidoisis constitute more than 10% of patients seen at specialized centers. Pulmonary fibrosis and associated complications, such as infections and pulmonary hypertension are leading causes of mortality. No universal definition of refractoriness exists, we therefore propose classifying patients as having refractory disease when the following criteria are fulfilled: (1) progressive disease despite at least 10 mg of prednisolone or equivalent for at least three months and need for additional disease-modifying anti-sarcoid drugs due to lack of efficacy, drug toxicity or intolerability and (2) treatment started for significant impairment of life due to progressive pulmonary symptoms. Both criteria should be fulfilled. Treatment options in addition to or instead of glucocorticoids for these patients include second- (methotrexate, azathioprine, leflunomide) and third-line agents (infliximab, adalimumab). Other immunmodulating agents can be used, but the evidence is very limited. Newer agents with anti-fibrotic properties, such as pirfenidone or nintedanib, might hold promise also for the pulmonary fibrosis seen in sarcoidosis. Treating physicians have to actively look for potentially treatable complications, such as pulmonary hypertension, cardiac disease or infections before patients should be classified as treatment-refractory. Ultimately, lung transplantation has to be considered as treatment option for patients not responding to medical therapy. In this review, we aim to propose a new definition of refractoriness, describe the associated clinical features and suggest the therapeutic approach.

  10. Development of various welding techniques for refractory and reactive metals and alloys

    International Nuclear Information System (INIS)

    Tonpe, Sunil; Saibaba, N.

    2016-01-01

    Nuclear Fuel Complex (NFC), Hyderabad, India with its excellent manufacturing facilities, produces nuclear fuel and structural components for nuclear reactors. NFC has taken up the challenging job of production of various critical components made out of refractory and reactive metals and alloys for nuclear and aerospace applications as an indigenization import substitute program. Refractory metals are prime candidates for many high temperature aerospace components because of refractory metal's high melting points and inherent creep resistance. The use of refractory metals is often limited because of their poor room temperature properties, inadequate oxidation resistance at elevated temperatures, difficulties associated with joining or welding etc. These advanced materials demand stringent requirement with respect to chemistry, dimensional tolerances, mechanical and metallurgical properties. This paper discusses in detail various welding techniques adopted in NFC for refractory and reactive metals and alloys such as Nb, Zr, Ti, Ta, Zircaloy, Titanium-half alloy etc. to manufacture various components and assemblies required for nuclear and aerospace applications

  11. Refractory status epilepticus and glutamic acid decarboxylase antibodies in adults: presentation, treatment and outcomes.

    Science.gov (United States)

    Khawaja, Ayaz M; Vines, Brannon L; Miller, David W; Szaflarski, Jerzy P; Amara, Amy W

    2016-03-01

    Glutamic acid decarboxylase antibodies (GAD-Abs) have been implicated in refractory epilepsy. The association with refractory status epilepticus in adults has been rarely described. We discuss our experience in managing three adult patients who presented with refractory status epilepticus associated with GAD-Abs. Case series with retrospective chart and literature review. Three patients without pre-existing epilepsy who presented to our institution with generalized seizures between 2013 and 2014 were identified. Seizures proved refractory to first and second-line therapies and persisted beyond 24 hours. Patient 1 was a 22-year-old female who had elevated serum GAD-Ab titres at 0.49 mmol/l (normal: status epilepticus. Causation cannot be established since GAD-Abs may be elevated secondary to concurrent autoimmune diseases or formed de novo in response to GAD antigen exposure by neuronal injury. Based on this report and available literature, there may be a role for immuno- and chemotherapy in the management of refractory status epilepticus associated with GAD-Abs.

  12. Refractories for steelmaking in Japan; Seikoyo taikabutsu no genjo (Nippon ni okeru seikoyo taikabutsu no hensen)

    Energy Technology Data Exchange (ETDEWEB)

    Kataoka, S. [Kurosaki Refractories Co. Ltd., Fukuoka (Japan)

    1996-05-01

    This paper describes changes and the current state of refractories for steel making in Japan. Refractories used for torpedo cars have undergone material improvement and diagnostic technology progress in alumina-SiC-C brick that serve in extending life and reducing unit requirement in furnace materials. The improvement and progress have been achieved under diversification in the methods of preliminary treatment of molten pig iron. In refractories for converters, the MgO-C brick had epoch-making improvement in life because of its excellent spalling and corrosion resistance resulting in expansion of its use. Refractories for iron ladles have been changed largely keeping the pace with progress in steelmaking technologies. Attempts have been made from using acidic refractories including zircon brick material to applying neutral and basic bricks. On the other hand, application of monolithic materials has begun, which has led to realizing the totally monolithic lining together with the progress in the repairing technologies including spraying. Plate materials for sliding gate nozzle to control flow rate of molten steel from an iron ladle now use Al2O3-C as the mainstream after having gone through a number of improvements. Alumina graphite material is used as the mainstream for immersion nozzles and shrouds which are important for continuous casting. 57 refs., 37 figs., 19 tabs.

  13. Effects of Temperature, Oxygen Partial Pressure, and Materials Selection on Slag Infiltration into Porous Refractories for Entrained-Flow Gasifiers

    Science.gov (United States)

    Kaneko, Tetsuya Kenneth

    The penetration rate of molten mineral contents (slag) from spent carbonaceous feedstock into porous ceramic-oxide refractory linings is a critical parameter in determining the lifecycle of integrated gasification combined cycle energy production plants. Refractory linings that withstand longer operation without interruption are desirable because they can mitigate consumable and maintenance costs. Although refractory degradation has been extensively studied for many other high-temperature industrial processes, this work focuses on the mechanisms that are unique to entrained-flow gasification systems. The use of unique feedstock mixtures, temperatures from 1450 °C to 1600 °C, and oxygen partial pressures from 10-7 atm to 10-9 atm pose engineering challenges in designing an optimal refractory material. Experimentation, characterization, and modeling show that gasifier slag infiltration into porous refractory is determined by interactions between the slag and the refractory that either form a physical barrier that impedes fluid flow or induce an increased fluid viscosity that decelerates the velocity of the fluid body. The viscosity of the slag is modified by the thermal profile of the refractory along the penetration direction as well as reactions between the slag and refractory that alter the chemistry, and thereby the thermo-physical properties of the fluid. Infiltration experiments reveal that the temperature gradient inherently present along the refractory lining limits penetration. A refractory in near-isothermal conditions demonstrates deeper slag penetration as compared to one that experiences a steeper thermal profile. The decrease in the local temperatures of the slag as it travels deeper into the refractory increases the viscosity of the fluid, which in turn slows the infiltration velocity of fluid body into the pores of the refractory microstructure. With feedstock mixtures that exhibit high iron-oxide concentrations, a transition-metal-oxide, the oxygen

  14. Microstructural characterization of welded unions of cast refractory steels

    International Nuclear Information System (INIS)

    Garin, Jorge L; Mannheim, Rodolfo L; Cisternas, Victor M; Lazo, Hector M

    2006-01-01

    This work presents a microstructural study of welded unions of cast heat resistant (refractory) steels, type HC (29Cr-2Ni-0,4C) and HD (28Cr-5Ni-0,4C) using quantitative metallography and X-ray diffraction. Two series of alloys were prepared in an induction furnace and cast in sand molds with phenolic resin, in the classic 'Y' shape, with thicknesses of 12, 25 and 50 mm, following ASTM A395. These samples were chemically and micro structurally characterized, in order to verify their chemical composition and the presence and distribution of phases in the material. Test pieces were then cut from the test section of the 'Y' samples to produce the welded unions, which were done with a single and double bevel (X) butt, using a manual arc and one with electrodes AWS E 309 and AWS E 410. These unions were also submitted to thermal treatments of 780 o C, in order to study the forced precipitation of the sigma phase, simulating service conditions in a production environment. The presence and distribution of phases in the fusion zone (welding cord) and in the thermally affected zones (TAZ) next to both sides of the cord were studied. They displayed a relatively low dilution compared to the composition of the electrodes. The presence of austenite in a ferritic matrix, with relatively small amounts of Cr 23 C 6 and Cr 7 C 3 carbides was shown together with an incipient presence of sigma phase. The annealing of the test pieces at temperatures close to those for the use of these materials, resulted in a new sigma precipitation, in different relative amounts, depending on the time of exposure to these temperatures. Sigma phase precipitates in low relative amounts simply from welding, but this event deserves more attention when the material is submitted to post-welding thermal treatments, or more intensely, to prolonged exposures to higher working temperatures. Quantitative metallographic techniques with contrast and coloring of phases can be used to quantify the micro

  15. Radiation hardening and embrittlement of some refractory metals and alloys

    International Nuclear Information System (INIS)

    Fabritsiev, S.; Pokrovskyb

    2007-01-01

    Tungsten is proposed for application in the ITER divertor and limiter as plasma facing material. The tungsten operation temperature in the ITER divertor is relatively high. Hence, the ductile properties of tungsten will be controlled by the low temperature radiation embrittlement. The mechanism of radiation hardening and embrittlement under neutron irradiation at low temperature is well studied for FCC metals, in particular for copper. At the same time, low-temperature radiation hardening of BCC materials, in particular for refractory metals, is less studied. This study presents the results of investigation into radiation hardening and embrittlement of pure metals: W, Mo and Nb, and W-Re and Ta-4W alloys. The materials were in the annealed conditions. The specimens were irradiated in the SM-2 reactor to doses of 10 -4 -10 -1 dpa at 80 C and then tested for tension at 80 C. The study of the stress-strain curves of unirradiated specimens revealed a yield drop for W, Mo, Nb, Ta-4W, W-Re. After the yield drop some metals (Mo,Nb) retain their capability for strain hardening and demonstrate a high elongation (20-50%). Radiation hardening is maximum in Mo (∝400MPa) and minimum in Nb (∝100 MPa). In this case the dependence slope for Nb is similar to that for pure copper irradiated in SM-2 under the same conditions. Ii and Ta-4W have a higher slope. Measurement of electrical resistivity of irradiated specimens showed that for all materials it is increased monotonously with an increase in the irradiation dose. A minimum gain in electrical resistivity with a dose was observed for Nb (∝3% at 0.1 dpa). As for Mo it was essentially higher, i.e. ∝ 30%. The gain was maximum for W-Re alloy. Comparison of radiation hardening dose dependencies obtained in this study with the data for FCC metals (Cu) showed that in spite of the quantitative difference the qualitative behavior of these two classes of metals is similar. (orig.)

  16. A role for very low-dose recombinant activated factor VII in refractory bleeding after cardiac surgery: Lessons from an observational study.

    Science.gov (United States)

    Hoffmann, Till; Assmann, Alexander; Dierksen, Angelika; Roussel, Elisabeth; Ullrich, Sebastian; Lichtenberg, Artur; Albert, Alexander; Sixt, Stephan

    2018-04-18

    Although off-label use of recombinant activated factor VII against refractory bleeding is incorporated in current guideline recommendations, safety concerns persist predominantly with respect to thromboembolic complications. We analyzed the safety and efficacy of recombinant activated factor VII at a very low dose in cardiosurgical patients with refractory bleeding. This prospective study includes 1180 cardiosurgical patients at risk of bleeding. Goal-directed substitution was based on real-time laboratory testing and clinical scoring of the bleeding intensity. All patients who fulfilled the criteria for enhanced risk of bleeding (n = 281) were consequently included in the present analysis. Patients in whom refractory bleeding developed despite substitution with specific hemostatic compounds (n = 167) received a single shot of very low-dose recombinant activated factor VII (≤20 μg/kg). Mortality and risk of thromboembolic complications, and freedom from stroke and acute myocardial infarction in particular, were analyzed (vs patients without recombinant activated factor VII) by multivariable logistic and Cox regression analyses, as well as Kaplan-Meier estimates. There was no increase in rates of mortality (30-day mortality 4.2% vs 7.0% with P = .418; follow-up survival 85.6% at 13.0 [interquartile range, 8.4-15.7] months vs 80.7% at 10.2 [interquartile range, 7.2-16.1] months with P = .151), thromboembolic complications (6.6% vs 9.6% with P = .637), renal insufficiency, need for percutaneous coronary intervention, duration of ventilation, duration of hospital stay, or rehospitalization in patients receiving very low-dose recombinant activated factor VII compared with patients not receiving recombinant activated factor VII. Complete hemostasis without any need for further hemostatic treatment was achieved after very low-dose recombinant activated factor VII administration in the majority of patients (up to 88.6% vs 0% with P factor VII treatment of

  17. Molecular transformation and degradation of refractory dissolved organic matter in the Atlantic and Southern Ocean

    Science.gov (United States)

    Lechtenfeld, Oliver J.; Kattner, Gerhard; Flerus, Ruth; McCallister, S. Leigh; Schmitt-Kopplin, Philippe; Koch, Boris P.

    2014-02-01

    More than 90% of the global ocean dissolved organic carbon (DOC) is refractory, has an average age of 4000-6000 years and a lifespan from months to millennia. The fraction of dissolved organic matter (DOM) that is resistant to degradation is a long-term buffer in the global carbon cycle but its chemical composition, structure, and biochemical formation and degradation mechanisms are still unresolved. We have compiled the most comprehensive molecular dataset of 197 Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) analyses from solid-phase extracted marine DOM covering two major oceans, the Atlantic sector of the Southern Ocean and the East Atlantic Ocean (ranging from 50° N to 70° S). Molecular trends and radiocarbon dating of 34 DOM samples (comprising Δ14C values from -229‰ to -495‰) were combined to model an integrated degradation rate for bulk DOC resulting in a predicted age of >24 ka for the most persistent DOM fraction. First order kinetic degradation rates for 1557 mass peaks indicate that numerous DOM molecules cycle on timescales much longer than the turnover of the bulk DOC pool (estimated residence times of up to ~100 ka) and the range of validity of radiocarbon dating. Changes in elemental composition were determined by assigning molecular formulae to the detected mass peaks. The combination of residence times with molecular information enabled modelling of the average elemental composition of the slowest degrading fraction of the DOM pool. In our dataset, a group of 361 molecular formulae represented the most stable composition in the oceanic environment (“island of stability”). These most persistent compounds encompass only a narrow range of the molecular elemental ratios H/C (average of 1.17 ± 0.13), and O/C (average of 0.52 ± 0.10) and molecular masses (360 ± 28 and 497 ± 51 Da). In the Weddell Sea DOC concentrations in the surface waters were low (46.3 ± 3.3 μM) while the organic radiocarbon was significantly

  18. The recovery of gold from refractory ores by the use of carbon-in-chlorine leaching

    Science.gov (United States)

    Greaves, John N.; Palmer, Glenn R.; White, William W.

    1990-09-01

    Recently, the U.S. Bureau of Mines examined the recovery of gold by chlorination of refractory carbonaceous and sulfidic ores, comparing various treatment methods in which a ground ore pulp is contacted with chlorine gas and activated carbon is added to the pulp for a carbon-in-chlorine leach (CICL). The objective of this research was to demonstrate the basic feasibility of CICL technology. Results showed that the organic carbon deactivating environment of CICL lowers, but does not eliminate, the adsorption of gold on activated carbon. In this environment, the refractory ore is altered, and gold is extracted and then recovered on activated carbon. With highly carbonaceous ores, CICL achieved a higher recovery than with primarily sulfidic refractory ores. Basic cyanide amenability testing of two carbonaceous ores achieved recoveries of only 5.5% and 46%. With CICL treatment, recoveries on carbon were 90% and 92%.

  19. Beneficiation and leaching study of a muti-Au carrier and low grade refractory gold ore

    Science.gov (United States)

    Li, W. J.; Song, Y. S.; Chen, Y.; Cai, L. L.; Zhou, G. Y.

    2017-09-01

    Detailed mineralogy and beneficiation and leaching study of a muti-Au carrier, low grade refractory gold ore from a beneficiation plant in Henan Province, China, was investigated. Mineral liberation analysis, scanning electron microscopy, element phase analysis and etc. by a mineral liberation analyser were used for mineralogical characterization study of this ore. The present work describes an experimental study on the effect of traditional parameters (such as grinding fineness and reagent regimes), middling processing method and flowsheet construction on the total recovery and the assay of the floatation concentrate. Two-step floatation and part of middling combined to the floatation tailing for gold leaching process resulted in high gold grade (g.t-1) and gold recovery (%) for this refractory gold ore. This process opens the possibilities of maximizing Au grade and recoveries in a muti-Au carrier and low grade refractory gold ore where low recoveries are common.

  20. Treatment of refractory/relapsed adult acute lymphoblastic leukemia with bortezomib- based chemotherapy

    Directory of Open Access Journals (Sweden)

    Zhao J

    2015-06-01

    Full Text Available Junmei Zhao,* Chao Wang,* Yongping Song, Yuzhang Liu, Baijun FangHenan Key Lab of Experimental Haematology, Henan Institute of Haematology, Henan Tumor Hospital, Zhengzhou University, Zhengzhou, People’s Republic of China  *These authors contributed equally to this work Abstract: Nine pretreated patients aged >19 years with relapsed/refractory acute lymphoblastic leukemia (ALL were treated with a combination of bortezomib plus chemotherapy before allogeneic hematopoietic stem cell transplantation (allo-HSCT. Eight (88.9% patients, including two Philadelphia chromosome-positive ALL patients, achieved a complete remission. Furthermore, the evaluable patients have benefited from allo-HSCT after response to this reinduction treatment. We conclude that bortezomib-based chemotherapy was highly effective for adults with refractory/relapsed ALL before allo-HSCT. Therefore, this regimen deserves a larger series within prospective trials to confirm these results. Keywords: acute lymphoblastic leukemia, refractory, relapsed, bortezomib