Present status of the EUR document the challenge of new incorporations

International Nuclear Information System (INIS)

Alomar, F.

1998-01-01

EUR (European Utilities Requirements) Document is in process, with DTN's active participation since the beginning. Two new Utilities representing non-European Union Countries (Switzerland and Russia) have joined the EUR Document Group of Sponsoring Utilities, whose members up to now belonged to nine utilities from European Union Countries. Although, in general terms, this incorporation is enriching, this late arrival does present problems due to the fact that the document is now under discussion the incorporation of different technological practices, and last but not least, different Licensing Approaches. Should be remembered that currently an overall review by the different Regulatory Bodies is in process and an intervention by the E.C. is being prepared. Both inside and outside of the European Continent, other Utilities have also shown their interest in the EUR Document. EUR Document Volume 3 sets a compliance evaluation between Projects from different Nuclear Island Manufactures and EUR's Top Tier Requirements (established in Volume 1) and Detailed Requirements (established in Volume 2). Presently a comparison is being carried out for three Nuclear Island Suppliers: ABB, NPI (KWU and Framatome Joint Venture) and Westinghouse. In the near future it is foreseen to initiate compliance evaluation for two more N.I. suppliers: General Electric and Rosenergatom. Challenges of these new incorporations are analyzed in what follows. (Author)

40 CFR 98.344 - Monitoring and QA/QC requirements.

Science.gov (United States)

2010-07-01

... Other Technical Requirements For Weighing and Measuring Devices” NIST Handbook 44 (2009)(incorporated by... Natural Gas by Gas Chromatography (incorporated by reference, see § 98.7). (3) ASTM D1946-90 (Reapproved 2006), Standard Practice for Analysis of Reformed Gas by Gas Chromatography (incorporated by reference...

Incorporating A Structured Writing Process into Existing CLS Curricula.

Science.gov (United States)

Honeycutt, Karen; Latshaw, Sandra

2014-01-01

Good communication and critical thinking are essential skills for all successful professionals, including Clinical Laboratory Science/Medical Laboratory Science (CLS/MLS) practitioners. Professional programs can incorporate writing assignments into their curricula to improve student written communication and critical thinking skills. Clearly defined, scenario-focused writing assignments provide student practice in clearly articulating responses to proposed problems or situations, researching and utilizing informational resources, and applying and synthesizing relevant information. Assessment rubrics, structured feedback, and revision writing methodologies help guide students through the writing process. This article describes how a CLS Program in a public academic medical center, located in the central United States (US) serving five centrally-located US states has incorporated writing intensive assignments into an existing 11-month academic year using formal, informal and reflective writing to improve student written communication and critical thinking skills. Faculty members and employers of graduates assert that incorporating writing intensive requirements have better prepared students for their professional role to effectively communicate and think critically.

Analysis of the cement clinker produced with incorporation of petroleum sludge

Science.gov (United States)

Benlamoudi, A.; Kadir, A. Abdul; Khodja, M.; Nuruddin, M. F.

2018-04-01

Very limited researches have been conducted on the incorporation of petroleum sludge waste into cement clinker production even though this waste may contain similar components to those of clinker raw materials. In this research, petroleum sludge was integrated into cement plant as raw material to produce the cement clinker. As results, incorporation of 5% of this waste was able to produce an acceptable quality of cement. Despite the use of petroleum sludge has decreased the properties of the produced clinker, but it still fit the requirements.

Incorporating other texts: Intertextuality in Malaysian CSR reports

Directory of Open Access Journals (Sweden)

Kumaran Rajandran

2016-11-01

Full Text Available In Malaysia, corporate social responsibility (CSR is relatively new but corporations have been required to engage in and disclose their CSR. A typical genre for disclosure is CSR reports and these reports often refer to other texts. The article investigates the act of referencing to other texts or intertextuality in Malaysian CSR reports. It creates an archive of CEO Statements and Environment Sections in CSR reports and studies the archive for keywords, which can identify the incorporated texts. The function of these texts is examined in relation to Malaysia’s corporate context. CSR reports contain explicit references to documents (policies, regulations, reports, research, standards and to individuals/groups (CEOs, stakeholders, expert organizations. The incorporated texts display variation in corporate control, which organizes these texts along an intertextual cline. The cline helps to identify corporate and non-corporate sources among the texts. The selection of incorporated texts may reflect government and stock exchange demands. The texts are not standardized and are relevant for the CSR domain and corporations, where these texts monitor and justify CSR performance. Yet, the incorporated texts may perpetuate inexact reporting because corporations select the texts and the parts of texts to refer to. Since these texts have been employed to scrutinize initiatives and results, CSR reports can claim to represent the “truth” about a corporation’s CSR. Hence, intertextuality serves corporate interests.

Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals

KAUST Repository

Abdelhady, Ahmed L.

2016-01-02

Controllable doping of semiconductors is a fundamental technological requirement for electronic and optoelectronic devices. As intrinsic semiconductors, hybrid perovskites have so far been a phenomenal success in photovoltaics. The inability to dope these materials heterovalently (or aliovalently) has greatly limited their wider utilizations in electronics. Here we show an efficient in situ chemical route that achieves the controlled incorporation of trivalent cations (Bi3+, Au3+, or In3+) by exploiting the retrograde solubility behavior of perovskites. We term the new method dopant incorporation in the retrograde regime. We achieve Bi3+ incorporation that leads to bandgap tuning (∼300 meV), 104 fold enhancement in electrical conductivity, and a change in the sign of majority charge carriers from positive to negative. This work demonstrates the successful incorporation of dopants into perovskite crystals while preserving the host lattice structure, opening new avenues to tailor the electronic and optoelectronic properties of this rapidly emerging class of solution-processed semiconductors. © 2016 American Chemical Society.

Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals

KAUST Repository

Abdelhady, Ahmed L.; Saidaminov, Makhsud I.; Banavoth, Murali; Adinolfi, Valerio; Voznyy, Oleksandr; Katsiev, Khabiboulakh; Alarousu, Erkki; Comin, Riccardo; Dursun, Ibrahim; Sinatra, Lutfan; Sargent, Edward H.; Mohammed, Omar F.; Bakr, Osman

2016-01-01

Controllable doping of semiconductors is a fundamental technological requirement for electronic and optoelectronic devices. As intrinsic semiconductors, hybrid perovskites have so far been a phenomenal success in photovoltaics. The inability to dope these materials heterovalently (or aliovalently) has greatly limited their wider utilizations in electronics. Here we show an efficient in situ chemical route that achieves the controlled incorporation of trivalent cations (Bi3+, Au3+, or In3+) by exploiting the retrograde solubility behavior of perovskites. We term the new method dopant incorporation in the retrograde regime. We achieve Bi3+ incorporation that leads to bandgap tuning (∼300 meV), 104 fold enhancement in electrical conductivity, and a change in the sign of majority charge carriers from positive to negative. This work demonstrates the successful incorporation of dopants into perovskite crystals while preserving the host lattice structure, opening new avenues to tailor the electronic and optoelectronic properties of this rapidly emerging class of solution-processed semiconductors. © 2016 American Chemical Society.

Incorporation of podoplanin into HIV released from HEK-293T cells, but not PBMC, is required for efficient binding to the attachment factor CLEC-2

Science.gov (United States)

2010-01-01

Background Platelets are associated with HIV in the blood of infected individuals and might modulate viral dissemination, particularly if the virus is directly transmitted into the bloodstream. The C-type lectin DC-SIGN and the novel HIV attachment factor CLEC-2 are expressed by platelets and facilitate HIV transmission from platelets to T-cells. Here, we studied the molecular mechanisms behind CLEC-2-mediated HIV-1 transmission. Results Binding studies with soluble proteins indicated that CLEC-2, in contrast to DC-SIGN, does not recognize the viral envelope protein, but a cellular factor expressed on kidney-derived 293T cells. Subsequent analyses revealed that the cellular mucin-like membranous glycoprotein podoplanin, a CLEC-2 ligand, was expressed on 293T cells and incorporated into virions released from these cells. Knock-down of podoplanin in 293T cells by shRNA showed that virion incorporation of podoplanin was required for efficient CLEC-2-dependent HIV-1 interactions with cell lines and platelets. Flow cytometry revealed no evidence for podoplanin expression on viable T-cells and peripheral blood mononuclear cells (PBMC). Podoplanin was also not detected on HIV-1 infected T-cells. However, apoptotic bystander cells in HIV-1 infected cultures reacted with anti-podoplanin antibodies, and similar results were obtained upon induction of apoptosis in a cell line and in PBMCs suggesting an unexpected link between apoptosis and podoplanin expression. Despite the absence of detectable podoplanin expression, HIV-1 produced in PBMC was transmitted to T-cells in a CLEC-2-dependent manner, indicating that T-cells might express an as yet unidentified CLEC-2 ligand. Conclusions Virion incorporation of podoplanin mediates CLEC-2 interactions of HIV-1 derived from 293T cells, while incorporation of a different cellular factor seems to be responsible for CLEC-2-dependent capture of PBMC-derived viruses. Furthermore, evidence was obtained that podoplanin expression is

Incorporation of podoplanin into HIV released from HEK-293T cells, but not PBMC, is required for efficient binding to the attachment factor CLEC-2

Directory of Open Access Journals (Sweden)

Münch Jan

2010-05-01

Full Text Available Abstract Background Platelets are associated with HIV in the blood of infected individuals and might modulate viral dissemination, particularly if the virus is directly transmitted into the bloodstream. The C-type lectin DC-SIGN and the novel HIV attachment factor CLEC-2 are expressed by platelets and facilitate HIV transmission from platelets to T-cells. Here, we studied the molecular mechanisms behind CLEC-2-mediated HIV-1 transmission. Results Binding studies with soluble proteins indicated that CLEC-2, in contrast to DC-SIGN, does not recognize the viral envelope protein, but a cellular factor expressed on kidney-derived 293T cells. Subsequent analyses revealed that the cellular mucin-like membranous glycoprotein podoplanin, a CLEC-2 ligand, was expressed on 293T cells and incorporated into virions released from these cells. Knock-down of podoplanin in 293T cells by shRNA showed that virion incorporation of podoplanin was required for efficient CLEC-2-dependent HIV-1 interactions with cell lines and platelets. Flow cytometry revealed no evidence for podoplanin expression on viable T-cells and peripheral blood mononuclear cells (PBMC. Podoplanin was also not detected on HIV-1 infected T-cells. However, apoptotic bystander cells in HIV-1 infected cultures reacted with anti-podoplanin antibodies, and similar results were obtained upon induction of apoptosis in a cell line and in PBMCs suggesting an unexpected link between apoptosis and podoplanin expression. Despite the absence of detectable podoplanin expression, HIV-1 produced in PBMC was transmitted to T-cells in a CLEC-2-dependent manner, indicating that T-cells might express an as yet unidentified CLEC-2 ligand. Conclusions Virion incorporation of podoplanin mediates CLEC-2 interactions of HIV-1 derived from 293T cells, while incorporation of a different cellular factor seems to be responsible for CLEC-2-dependent capture of PBMC-derived viruses. Furthermore, evidence was obtained that

Biological evaluation of nanosilver incorporated cellulose pulp for hygiene products

Energy Technology Data Exchange (ETDEWEB)

Kavitha Sankar, P.C.; Ramakrishnan, Reshmi; Rosemary, M.J., E-mail: rosemarymj@lifecarehll.com

2016-04-01

Cellulose pulp has a visible market share in personal hygiene products such as sanitary napkins and baby diapers. However it offers good surface for growth of microorganisms. Huge amount of research is going on in developing hygiene products that do not initiate microbial growth. The objective of the present work is to produce antibacterial cellulose pulp by depositing silver nanopowder on the cellulose fiber. The silver nanoparticles used were of less than 100 nm in size and were characterised using transmission electron microscopy and X-ray powder diffraction studies. Antibacterial activity of the functionalized cellulose pulp was proved by JIS L 1902 method. The in-vitro cytotoxicity, in-vivo vaginal irritation and intracutaneous reactivity studies were done with silver nanopowder incorporated cellulose pulp for introducing a new value added product to the market. Cytotoxicity evaluation suggested that the silver nanoparticle incorporated cellulose pulp is non-cytotoxic. No irritation and skin sensitization were identified in animals tested with specific extracts prepared from the test material in the in-vivo experiments. The results indicated that the silver nanopowder incorporated cellulose pulp meets the requirements of the standard practices recommended for evaluating the biological reactivity and has good biocompatibility, hence can be classified as a safe hygiene product. - Highlights: • Different amounts of silver nanoparticles (0.2 g–0.4 g/napkin) were added to cellulose pulp. • The silver nanoparticle incorporated cellulose pulp was proved to be antibacterial by JIS L 1902 method. • The minimum concentration of silver required for antibacterial activity with no cytotoxicity has been found out. • In-vivo vaginal irritation and intracutaneous reactivity studies confirmed the biocompatibility of the material.

Biological evaluation of nanosilver incorporated cellulose pulp for hygiene products

International Nuclear Information System (INIS)

Kavitha Sankar, P.C.; Ramakrishnan, Reshmi; Rosemary, M.J.

2016-01-01

Cellulose pulp has a visible market share in personal hygiene products such as sanitary napkins and baby diapers. However it offers good surface for growth of microorganisms. Huge amount of research is going on in developing hygiene products that do not initiate microbial growth. The objective of the present work is to produce antibacterial cellulose pulp by depositing silver nanopowder on the cellulose fiber. The silver nanoparticles used were of less than 100 nm in size and were characterised using transmission electron microscopy and X-ray powder diffraction studies. Antibacterial activity of the functionalized cellulose pulp was proved by JIS L 1902 method. The in-vitro cytotoxicity, in-vivo vaginal irritation and intracutaneous reactivity studies were done with silver nanopowder incorporated cellulose pulp for introducing a new value added product to the market. Cytotoxicity evaluation suggested that the silver nanoparticle incorporated cellulose pulp is non-cytotoxic. No irritation and skin sensitization were identified in animals tested with specific extracts prepared from the test material in the in-vivo experiments. The results indicated that the silver nanopowder incorporated cellulose pulp meets the requirements of the standard practices recommended for evaluating the biological reactivity and has good biocompatibility, hence can be classified as a safe hygiene product. - Highlights: • Different amounts of silver nanoparticles (0.2 g–0.4 g/napkin) were added to cellulose pulp. • The silver nanoparticle incorporated cellulose pulp was proved to be antibacterial by JIS L 1902 method. • The minimum concentration of silver required for antibacterial activity with no cytotoxicity has been found out. • In-vivo vaginal irritation and intracutaneous reactivity studies confirmed the biocompatibility of the material.

Optimum sizing of wind-battery systems incorporating resource uncertainty

International Nuclear Information System (INIS)

Roy, Anindita; Kedare, Shireesh B.; Bandyopadhyay, Santanu

2010-01-01

The inherent uncertainty of the wind is a major impediment for successful implementation of wind based power generation technology. A methodology has been proposed in this paper to incorporate wind speed uncertainty in sizing wind-battery system for isolated applications. The uncertainty associated with the wind speed is incorporated using chance constraint programming approach. For a pre-specified reliability requirement, a deterministic equivalent energy balance equation may be derived from the chance constraint that allows time series simulation of the entire system. This results in a generation of the entire set of feasible design options, satisfying different system level constraints, on a battery capacity vs. generator rating diagram, also known as the design space. The proposed methodology highlights the trade-offs between the wind turbine rating, rotor diameter and the battery size for a given reliability of power supply. The optimum configuration is chosen on the basis of the minimum cost of energy (US$/kWh). It is shown with the help of illustrative examples that the proposed methodology is generic and flexible to incorporate alternate sub-component models. (author)

Staphylococcus aureus Sortase A-Mediated Incorporation of Peptides: Effect of Peptide Modification on Incorporation.

Directory of Open Access Journals (Sweden)

Silvie Hansenová Maňásková

Full Text Available The endogenous Staphylococcus aureus sortase A (SrtA transpeptidase covalently anchors cell wall-anchored (CWA proteins equipped with a specific recognition motif (LPXTG into the peptidoglycan layer of the staphylococcal cell wall. Previous in situ experiments have shown that SrtA is also able to incorporate exogenous, fluorescently labelled, synthetic substrates equipped with the LPXTG motif (K(FITCLPETG-amide into the bacterial cell wall, albeit at high concentrations of 500 μM to 1 mM. In the present study, we have evaluated the effect of substrate modification on the incorporation efficiency. This revealed that (i by elongation of LPETG-amide with a sequence of positively charged amino acids, derived from the C-terminal domain of physiological SrtA substrates, the incorporation efficiency was increased by 20-fold at 10 μM, 100 μM and 250 μM; (ii Substituting aspartic acid (E for methionine increased the incorporation of the resulting K(FITCLPMTG-amide approximately three times at all concentrations tested; (iii conjugation of the lipid II binding antibiotic vancomycin to K(FITCLPMTG-amide resulted in the same incorporation levels as K(FITCLPETG-amide, but much more efficient at an impressive 500-fold lower substrate concentration. These newly developed synthetic substrates can potentially find broad applications in for example the in situ imaging of bacteria; the incorporation of antibody recruiting moieties; the targeted delivery and covalent incorporation of antimicrobial compounds into the bacterial cell wall.

Optimal Incorporation Level of Dietary Alternative Phosphate (MgHPO and Requirement for Phosphorus in Juvenile Far Eastern Catfish (

Directory of Open Access Journals (Sweden)

Tae-Hyun Yoon

2015-01-01

Full Text Available A growth trial was conducted to determine the optimal incorporation level of dietary magnesium hydrogen phosphate (MHP, MgHPO4, which was manufactured from swine manure and phosphorus (P, required by juvenile far eastern catfish (Silurus asotus. Graded MHP of 0.5%, 1.0%, 1.5%, and 2.0%, and 2.0% monocalcium phosphate (MCP each was added to the basal diet (control in lieu of cellulose to become the range of available P (AP from 0.4% to 0.8% of which diets were designated as control, MHP0.5, MHP1.0, MHP1.5, MHP2.0, and MCP, respectively. Control diet contained fish meal (20%, soybean meal (40%, wheat flour (27%, corn gluten meal (5%, fish oil (2% and soy oil (2% as main ingredients. Following a 24 h fasting, 540 fish with a mean body weight of 11.8 g were randomly allotted to 6 groups in triplicate, whereby 18 tanks (0.4×0.6×0.36 cm, water volume of 66 L were prepared. The feeding experiment lasted for 8 weeks. Fish group fed the control diet showed the lowest weight gain (WG and feed efficiency (FE among treatments. The WG was, however, not significantly different (p>0.05 from that of fish group fed MHP0.5. Fish group fed MHP2.0 showed the highest WG and FE of which values were not significantly different from those of fish groups fed diets MHP1.0 and MHP1.5 as well as MCP (p>0.05 except fish groups fed control and MHP0.5. Aspartate aminotransferase was significantly decreased with an increase in available P, while alanine aminotransferase did not show a significant difference among treatment. The highest inorganic P in plasma was observed in fish fed MHP2.0. From the present results, a second-order regression analysis revealed that the optimal dietary MHP level and the AP requirement were found to be 1.62% and 0.7%, respectively.

Incorporating a Socio-Ecological-Technological Systems (SETS) perspective into the adaptive management framework

Science.gov (United States)

Incorporating a social-ecological-technological systems (SETS) perspective to the adaptive management process requires that stakeholders and managers conceptualize restoration projects as part of coupled human and natural systems and assess underlying social drivers and accrued b...

Incorporating Active Learning and Student Inquiry into an Introductory Merchandising Class

Science.gov (United States)

Lee, Hyun-Hwa; Hines, Jean D.

2012-01-01

Many educators believe that student learning is enhanced when they are actively involved in classroom activities that require student inquiry. The purpose of this paper is to report on three student inquiry projects that were incorporated into a merchandising class with the focus on making students responsible for their learning, rather than the…

Performance Requirements for the Double Shell Tank (DST) System

International Nuclear Information System (INIS)

SMITH, D.F.

2001-01-01

This document identifies the upper-level Double-Shell Tank (DST) System functions and bounds the associated performance requirements. The functions and requirements are provided along with supporting bases. These functions and requirements, in turn, will be incorporated into specifications for the DST System

Incorporation of [h]leucine and [h]valine into protein of freshwater bacteria: field applications.

Science.gov (United States)

Jørgensen, N O

1992-11-01

Incorporation of leucine and valine into proteins of freshwater bacteria as a measure of bacterial production was tested in two eutrophic Danish lakes and was related to bacterial production measured by thymidine incorporation. In a depth profile (0 to 8 m) in Frederiksborg Castle Lake, incorporation of 100 nM leucine and valine gave similar rates of protein production. In terms of carbon, this production was about 50% lower than incorporation of 10 nM thymidine. In another depth profile in the same lake, incorporations of 10 nM valine and 100 nM leucine were identical, but differed from incorporations of 10 nM leucine and 100 nM valine. Bacterial carbon production calculated from incorporations of 10 nM thymidine and 10 nM leucine was similar, whereas 10 nM valine and 100 nM leucine and valine indicated an up to 2.4-fold-higher rate of carbon production. In a diel study in Lake Bagsvaerd, incorporation of 100 nM leucine and valine indicated a similar protein production, but the calculated carbon production was about 1.9-fold higher than the production based on uptake of 10 nM thymidine. Different diel changes in incorporation of the two amino acids and in incorporation of thymidine were observed. In both lakes, concentrations of naturally occurring leucine and valine were activity of a H isotope added at a concentration of 100 nM usually was diluted a maximum of 5%. Net assimilation of natural free amino acids in the lakes sustained 8 to 69% of the net bacterial carbon requirement, estimated from incorporation of leucine, valine, or thymidine. The present results indicate that incorporation of leucine and valine permits realistic measurements of bacterial production in freshwater environments.

Structural and functional characterization of Rpn12 identifies residues required for Rpn10 proteasome incorporation.

Science.gov (United States)

Boehringer, Jonas; Riedinger, Christiane; Paraskevopoulos, Konstantinos; Johnson, Eachan O D; Lowe, Edward D; Khoudian, Christina; Smith, Dominique; Noble, Martin E M; Gordon, Colin; Endicott, Jane A

2012-11-15

The ubiquitin-proteasome system targets selected proteins for degradation by the 26S proteasome. Rpn12 is an essential component of the 19S regulatory particle and plays a role in recruiting the extrinsic ubiquitin receptor Rpn10. In the present paper we report the crystal structure of Rpn12, a proteasomal PCI-domain-containing protein. The structure helps to define a core structural motif for the PCI domain and identifies potential sites through which Rpn12 might form protein-protein interactions. We demonstrate that mutating residues at one of these sites impairs Rpn12 binding to Rpn10 in vitro and reduces Rpn10 incorporation into proteasomes in vivo.

Incorporating functional requirements into the structural design of the Defense Waste Processing Facility

International Nuclear Information System (INIS)

Hsiu, F.J.; Ng, C.K.; Almuti, A.M.

1986-01-01

Vitrification Building-type structures have unique features and design needs. The structural design requires new concepts and custom detailing. The above special structural designs have demonstrated the importance of the five design considerations listed in the introduction. Innovative ideas and close coordination are required to achieve the design objectives. Many of these innovations have been applied to the DWPF facility which is a first of a kind

Requirements for internal contamination monitoring units

International Nuclear Information System (INIS)

Werner, E.; Beyer, D.; Doerfel, H.; Erlenbach, H.; Fischbach, G.; Henrichs, K.; Keller, K.D.; Koenig, K.; Riedel, W.; Scheler, R.; Schieferdecker, H.

1994-01-01

For the evaluation of internal contamination by officially authorized monitoring units according to section 63 (6) of the German radiation protection ordinance, a directive will be prepared in order to define uniform requirements for the laboratories in charge of incorporation monitoring by appointment of the relevant authorities. These requirements refer to equipment, to performance of measurements, to interpretation of measured values, to quality control as well as to documentation and to delivery of results. The duties of such laboratories comprise measurements of radioactivity, evaluation of intakes of radionuclides and of the resulting internal radiation dose, but also transmission of results to the employer, to the central dose registry, and under certain circumstances to the authorities. Among the requirements to be met by the laboratory for incorporation control are a sufficient measuring efficiency, the implementation of in-house checks, and the participation in intercomparison programs. For the accomplishment of such duties the laboratory needs appropriate apparatus, rooms, facilities, and staffing. (orig.) [de

From Words to Action: Incorporation of Sustainability in Architectural Education

Directory of Open Access Journals (Sweden)

Badiossadat Hassanpour

2017-10-01

Full Text Available Schools of architecture play a major role in motivating and inspiring students to gain competencies in sustainability through pedagogical practices. However, at the operational level, the incorporation of sustainability within architectural programmes needs to be integrated into both the curricula and teaching methods. There are few studies on how architectural programmes’ curricula and pedagogical practices can be institutionally articulated, as well as on how the required coherency among components can be empowered operationally. Since the interrelation of the courses form the structure of the curricula and provide certain inputs for the students’ knowledge and skill, any operational risk can harm the quality assurance. Therefore, an operational framework aimed for a coordinated incorporation of sustainability in architectural programmes is required. In order to achieve this, scrutinising substantial equivalence programmes could provide constructive outcomes for the improvement of the existing programmes and future experiences for students. In order to determine the articulation of sustainability issues in architectural education, in this research, a recently accredited school in the Eastern Mediterranean region was chosen as a case study. The study includes an analysis of course descriptions, teaching methods, and teacher and student perceptions about the incorporation of sustainability into the courses. Also, jury sessions’ evaluation criteria are assessed as a pedagogical tool. Then, the horizontal and vertical articulation of courses within the curricula and their coordination were studied accordingly. The findings reveal that horizontal and vertical relations between different course types that share similar learning objectives are very important. However, this relation and continuum should be perceivable by students, tutors, and the relevant stakeholders; otherwise, any attempt would remain superficial. Accordingly, the association

Developing an institutional framework to incorporate ecosystem services into decision making-Proceedings of a workshop

Science.gov (United States)

Hogan, Dianna; Arthaud, Greg; Brookshire, David; Gunther, Tom; Pincetl, Stephanie; Shapiro, Carl; Van Horne, Bea

2011-01-01

The routine and effective incorporation of ecosystem services information into resource management decisions requires a careful consideration of the value of goods and services provided by natural systems. A multidisciplinary workshop was held in October 2008 on "Developing an Institutional Framework to Incorporate Ecosystem Services into Decision Making." This report summarizes that workshop, which focused on examining the relationship between an institutional framework and consideration of ecosystem services in resource management decision making.

Getting Grip on Security Requirements Elicitation by Structuring and Reusing Security Requirements Sources

Directory of Open Access Journals (Sweden)

Christian Schmitt

2015-07-01

Full Text Available This paper presents a model for structuring and reusing security requirements sources. The model serves as blueprint for the development of an organization-specific repository, which provides relevant security requirements sources, such as security information and knowledge sources and relevant compliance obligations, in a structured and reusable form. The resulting repository is intended to be used by development teams during the elicitation and analysis of security requirements with the goal to understand the security problem space, incorporate all relevant requirements sources, and to avoid unnecessary effort for identifying, understanding, and correlating applicable security requirements sources on a project-wise basis. We start with an overview and categorization of important security requirements sources, followed by the description of the generic model. To demonstrate the applicability and benefits of the model, the instantiation approach and details of the resulting repository of security requirements sources are presented.

30 CFR 785.16 - Permits incorporating variances from approximate original contour restoration requirements for...

Science.gov (United States)

2010-07-01

... approximate original contour restoration requirements for steep slope mining. 785.16 Section 785.16 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL... approximate original contour restoration requirements for steep slope mining. (a) The regulatory authority may...

Numeral Incorporation in Japanese Sign Language

Science.gov (United States)

Ktejik, Mish

2013-01-01

This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

The Value of Incorporating Emotional Intelligence Skills in the Education of Accounting Students

Directory of Open Access Journals (Sweden)

Greg Jones

2009-06-01

Full Text Available The tasks and skills that are required of accounting practitioners in today’s global business environment havechanged significantly since the early 1990s. No longer are accounting practitioners required merely toundertake the tasks necessary for information provision, such as bookkeeping, data analysis and taxpreparation. Instead, they are now in a more encompassing position which has extended their roles intoinformation facilitation, thus repositioning accountants as knowledge professionals rather than accountingtechnicians. This in turn suggests a need for a greater emphasis on incorporating components of emotionalintelligence in accounting education. However, as accounting students are generally not aware of thisexpanded role, those who are attracted into accounting courses may not possess the appropriate aptitude thatwould provide a good foundation for developing the skills now required in the professional accountingenvironment. Therefore, it is important that the teaching of accounting should incorporate strategies thatenable students to understand and the need for developing these necessary, but often missing, competencies.This paper reports on two independent studies conducted at an Australian university which suggest thatincorporating emotional intelligence skills into the education of accounting students, by providing a variety oflearning environments and tasks, may be beneficial to accounting graduates as they seek employment.

Identified adjustability dimensions when generating a product specific requirements specification by requirements reuse

DEFF Research Database (Denmark)

Hauksdóttir, Dagný; Mortensen, Niels Henrik; Nielsen, Poul Erik

2014-01-01

. An extensive state of the art is included to introduce the presented methods related to each adjustability dimensions. The options for implementing each adjustability dimensions in a requirement reuse approach are illustrated along with a discussion regarding the benefits and issues resulting from each option....... This discussion should help practitioners to better understand the possible methods that can be implemented and to design a user friendly and sustainable approach. A case study, describing how the dimensions are incorporated in two requirements reuse approaches, for Danfoss Solar Inverters (SI) and Danfoss...

Connected vehicle impacts on transportation planning technical memorandum #6: skills and expertise required to incorporate connected vehicles into transportation planning.

Science.gov (United States)

2016-02-08

Professional development and training are essential to the incorporation of connected/automated vehicles (C/AV) into the : transportation planning process. In order to guarantee a successful deployment, transportation planning agencies and their : st...

IDEA-system - a new computer based expert system for incorporation monitoring

International Nuclear Information System (INIS)

Doerfel, H.

2005-01-01

Full text: There is an increasing number of national and international recommendations and guidelines for incorporation monitoring (ICRP Publications, IAEA Safety Reports, ISO Standards, etc.). These recommendations cover different phases of incorporation monitoring and they provide general requirements for the measuring techniques, the monitoring procedures and for the procedures to evaluate intakes and doses from the monitoring results. There is, however, still a strong need for giving guidance to the dosimetrists on how to apply all the regulations properly. Thus, the EU project IDEAS was launched in order to provide general guidelines for the assessment of internal dose from incorporation monitoring data. These guidelines have recently been discussed in a virtual workshop on the internet (www.ideas-workshop.de) and they are being considered by ICRP for possible adoption in the near future. Recently, in the Karlsruhe Research Centre, a computer-based expert system has been developed for assisting dosimetrists in applying the relevant recommendations and guidelines for incorporation monitoring and internal dosimetry. The expert system gives guidance to the user with respect to: planning of monitoring (estimation of potential exposures, decision on the requirements of monitoring, definition of optimum measuring techniques and monitoring intervals); performing routine and special monitoring and evaluation of primary monitoring results. The evaluation of primary monitoring results is done according to the IDEAS guidelines in a threestage procedure according to the expected level of exposure (E = committed effective dose): standard evaluation with default or site specific parameter values (E 6 mSv). With these well-defined procedures the expert system follows the aim, that all recommendations and guidelines are applied properly and thus: internal exposures of more than 1 mSv are very likely to be detected in all situations; the results in terms of committed effective

NON FUNCTIONAL REQUIREMENT TRACEABILITY AUTOMATION-AN MOBILE MULTIMEDIA APPROACH

OpenAIRE

J. Selvakumar; M. Rajaram

2012-01-01

Requirements Engineering (RE) is the area of software engineering that deals with the discovery and specification of the objectives for the system under development and the environment in which it is used including the human activities it supports. Requirement Elicitation is process of gathering requirements from stakeholders. Incorporating RE to identify non Functional Requirements (NFR) in early stages of design and implementation avoids ambiguities, conflicting requirement and other defect...

INCORPORATING GOOD LAND GOVERNANCE IN THE DISASTER REGION OF YOGYAKARTA

Directory of Open Access Journals (Sweden)

Sunarno Sunarno

2016-03-01

Full Text Available Land is one of the most major capitals in our life. Without it, sustainability of human existence is very impossible. Unfortunately, land problems in Indonesia have unique challenges compared to other countries. Many of kinds of challenges are in the form of the natural disasters. This paper is going to measure how well the principles of good governance has been incorporated in the Yogyakarta Special Region Land administration System generally by studying on the Merapi Disaster Mitigation, particularly in how  land planning for the Merapi Disaster’s victims is performed. The research methodology employs a combined research method, it means that fundamental principles in process and its output of both the doctrinal and non doctrinal approaches is synergized to based on the research’s activity unites. Configuration of  the land administration systems in achieving people prosperity has been affected by evolution of political, cultural, and legal awareness of local communities and central government policy. To conclude, incorporating a disaster response based land policy principles requires an integrated law and policy making system among parties through the implementation of good governance principle in the record of public participation voices and sustainable development interests. Notable reports illustrate that the good land governance incorporation encouraged and inspired land planning system to be more efficient and effective. Particularly in the natural disaster mitigation and reconstruction, incorporating good land governance principles furthermore encourages land policy makers to achieve the responsive land management in line with social demands and sustainable development programs.

Incorporating Sustainability into Site Closure - A Field Example

Science.gov (United States)

Austrins, L. M.; West, J.

2013-12-01

Long term management of former chemical production facilities can be a costly and time consuming element of site closure, however, implementation of creative measures to introduce sustainability and reduce the need for onsite presence can be successfully incorporated into the site closure process. A case study demonstrating this involves a facility located in Sarnia, Ontario, which was an active multi chemical production facility from the 1940s, until it was decommissioned and sold between 2005 and 2010. The facility consisted of 322 acres of production areas. Several elements which allowed for reduced onsite presence and lower management costs were incorporated into the site decommissioning plan, including; phased remediation planning, and selection of sustainable components as part of remediation, surface water management, and groundwater management. The sustainability and management modifications were successfully negotiated and approved by the local regulatory agency. Due to the size and complexity of the site, a holistic approach for the facility was needed and included the development of a comprehensive decision matrix. Each remediation alternative incorporated sustainable practices. Ex-situ remediation consisted of excavation of contaminated subsurface medium and consolidation at a 4.7 acre onsite soil treatment area designed specifically for the site closure process. In-situ remediation consisted of injection of amendment into the native soils using hydraulic fracture and injection. When the plant was an active operating facility, groundwater management required active pumping and groundwater treatment through a series of carbon treatment units. Active pumping has been replaced by passive hydraulic control through the use of tree plantations.

Ionic liquid pretreatment of poplar wood at room temperature: swelling and incorporation of nanoparticles.

Science.gov (United States)

Lucas, Marcel; Macdonald, Brian A; Wagner, Gregory L; Joyce, Stephen A; Rector, Kirk D

2010-08-01

Lignocellulosic biomass offers economic and environmental advantages over corn starch for biofuels production. However, its fractionation currently requires energy-intensive pretreatments, due to the lignin chemical resistance and complex cell wall structure. Recently, ionic liquids have been used to dissolve biomass at high temperatures. In this study, thin sections of poplar wood were swollen by ionic liquid (1-ethyl-3-methylimidazolium acetate) pretreatment at room temperature. The samples contract when rinsed with deionized water. The controlled expansion and contraction of the wood structure can be used to incorporate enzymes and catalysts deep into the wood structure for improved pretreatments and accelerated cellulose hydrolysis. As a proof of concept, silver and gold nanoparticles of diameters ranging from 20 to 100 nm were incorporated at depths up to 4 mum. Confocal surface-enhanced Raman images at different depths show that a significant number of nanoparticles were incorporated into the pretreated sample, and they remained on the samples after rinsing. Quantitative X-ray fluorescence microanalyses indicate that the majority of nanoparticle incorporation occurs after an ionic liquid pretreatment of less than 1 h. In addition to improved pretreatments, the incorporation of materials and chemicals into wood and paper products enables isotope tracing, development of new sensing, and imaging capabilities.

Herpes Simplex Virus Type 1 Glycoprotein B Requires a Cysteine Residue at Position 633 for Folding, Processing, and Incorporation into Mature Infectious Virus Particles

Science.gov (United States)

Laquerre, Sylvie; Anderson, Dina B.; Argnani, Rafaela; Glorioso, Joseph C.

1998-01-01

intermolecular interactions with the wild-type molecule. Together, these experiments confirmed that a disulfide bridge involving Cys-633 and Cys-596 is not essential for oligomerization but rather is required for proper folding and maintenance of a gB domain essential to complete posttranslational modification, transport, and incorporation into mature virus particles. PMID:9573262

Host thin films incorporating nanoparticles

Science.gov (United States)

Qureshi, Uzma

The focus of this research project was the investigation of the functional properties of thin films that incorporate a secondary nanoparticulate phase. In particular to assess if the secondary nanoparticulate material enhanced a functional property of the coating on glass. In order to achieve this, new thin film deposition methods were developed, namely use of nanopowder precursors, an aerosol assisted transport technique and an aerosol into atmospheric pressure chemical vapour deposition system. Aerosol assisted chemical vapour deposition (AACVD) was used to deposit 8 series of thin films on glass. Five different nanoparticles silver, gold, ceria, tungsten oxide and zinc oxide were tested and shown to successfully deposit thin films incorporating nanoparticles within a host matrix. Silver nanoparticles were synthesised and doped within a titania film by AACVD. This improved solar control properties. A unique aerosol assisted chemical vapour deposition (AACVD) into atmospheric pressure chemical vapour deposition (APCVD) system was used to deposit films of Au nanoparticles and thin films of gold nanoparticles incorporated within a host titania matrix. Incorporation of high refractive index contrast metal oxide particles within a host film altered the film colour. The key goal was to test the potential of nanopowder forms and transfer the suspended nanopowder via an aerosol to a substrate in order to deposit a thin film. Discrete tungsten oxide nanoparticles or ceria nanoparticles within a titanium dioxide thin film enhanced the self-cleaning and photo-induced super-hydrophilicity. The nanopowder precursor study was extended by deposition of zinc oxide thin films incorporating Au nanoparticles and also ZnO films deposited from a ZnO nanopowder precursor. Incorporation of Au nanoparticles within a VO: host matrix improved the thermochromic response, optical and colour properties. Composite VC/TiC and Au nanoparticle/V02/Ti02 thin films displayed three useful

System 80+{trademark} standard design incorporates radiation protection lessons learned

Energy Technology Data Exchange (ETDEWEB)

Crom, T.D.; Naugle, C.L. [Duke Engineering & Services, Inc., Charlotte, NC (United States); Turk, R.S. [ABB Combustion Engineering Nuclear Power, Windsor, CT (United States)

1995-03-01

Many lessons have been learned from the current generation of nuclear plants in the area of radiation protection. The following paper will outline how the lessons learned have been incorporated into the design and operational philosophy of the System 80+{trademark} Standard Design currently under development by ABB Combustion Engineering (ABB-CE) with support from Duke Engineering and Services, Inc. and Stone and Webster Engineering Corporation in the Balance-of-Plant design. The System 80+{trademark} Standard Design is a complete nuclear power plant for national and international markets, designed in direct response to utility needs for the 1990`s, and scheduled for Nuclear Regulatory Commission (NRC) Design Certification under the new standardization rule (10 CFR Part 52). System 80+{trademark} is a natural extension of System 80{sup R} technology, an evolutionary change based on proven Nuclear Steam Supply System (NSSS) in operation at Palo Verde in Arizona and under construction at Yonggwang in the Republic of Korea. The System 80+{trademark} Containment and much of the Balance of Plant design is based upon Duke Power Company`s Cherokee Plant, which was partially constructed in the late 1970`s, but, was later canceled (due to rapid declined in electrical load growth). The System 80+{trademark} Standard Design meets the requirements given in the Electric Power Research Institute (EPRI) Advanced Light Water Reactor (ALWR) Requirements Document. One of these requirements is to limit the occupational exposure to 100 person-rem/yr. This paper illustrates how this goal can be achieved through the incorporation of lessons learned, innovative design, and the implementation of a common sense approach to operation and maintenances practices.

Simplified Technique for Incorporating a Metal Mesh into Record Bases for Mandibular Implant Overdentures.

Science.gov (United States)

Godoy, Antonio; Siegel, Sharon C

2015-12-01

Mandibular implant-retained overdentures have become the standard of care for patients with mandibular complete edentulism. As part of the treatment, the mandibular implant-retained overdenture may require a metal mesh framework to be incorporated to strengthen the denture and avoid fracture of the prosthesis. Integrating the metal mesh framework as part of the acrylic record base and wax occlusion rim before the jaw relation procedure will avoid the distortion of the record base and will minimize the chances of processing errors. A simplified method to incorporate the mesh into the record base and occlusion rim is presented in this technique article. © 2015 by the American College of Prosthodontists.

Controlled structure and properties of silicate nanoparticle networks for incorporation of biosystem components

International Nuclear Information System (INIS)

Sakai-Kato, Kumiko; Kawanishi, Toru; Hasegawa, Toshiaki; Takaoka, Akio; Kato, Masaru; Toyo'oka, Toshimasa; Utsunomiya-Tate, Naoko

2011-01-01

Inorganic nanoparticles are of technological interest in many fields. We created silicate nanoparticle hydrogels that effectively incorporated biomolecules that are unstable and involved in complicated reactions. The size of the silicate nanoparticles strongly affected both the physical characteristics of the resulting hydrogel and the activity of biomolecules incorporated within the hydrogel. We used high-resolution transmission electron microscopy (TEM) to analyze in detail the hydrogel network patterns formed by the silicate nanoparticles. We obtained clear nanostructured images of biomolecule-nanoparticle composite hydrogels. The TEM images also showed that larger silicate nanoparticles (22 nm) formed more loosely associated silicate networks than did smaller silicate nanoparticles (7 nm). The loosely associated networks formed from larger silicate nanoparticles might facilitate substrate diffusion through the network, thus promoting the observed increased activity of the entrapped biomolecules. This doubled the activity of the incorporated biosystems compared with that of biosystems prepared by our own previously reported method. We propose a reaction scheme to explain the formation of the silicate nanoparticle networks. The successful incorporation of biomolecules into the nanoparticle hydrogels, along with the high level of activity exhibited by the biomolecules required for complicated reaction within the gels, demonstrates the nanocomposites' potential for use in medical applications.

Incorporating X–ray summing into gamma–gamma signature quantification

International Nuclear Information System (INIS)

Britton, R.; Jackson, M.J.; Davies, A.V.

2016-01-01

A method for quantifying coincidence signatures has been extended to incorporate the effects of X–ray summing, and tested using a high–efficiency γ–γ system. An X–ray library has been created, allowing all possible γ, X–ray and conversion electron cascades to be generated. The equations for calculating efficiency and cascade summing corrected coincidence signature probabilities have also been extended from a two γ, two detector ‘special case’ to an arbitrarily large system. The coincidence library generated is fully searchable by energy, nuclide, coincidence pair, γ multiplicity, cascade probability and the half–life of the cascade, allowing the user to quickly identify coincidence signatures of interest. The method and software described is inherently flexible, as it only requires evaluated nuclear data, an X–ray library, and accurate efficiency characterisations to quickly and easily calculate coincidence signature probabilities for a variety of systems. Additional uses for the software include the fast identification of γ coincidence signals with required multiplicities and branching ratios, identification of the optimal coincidence signatures to measure for a particular system, and the calculation of cascade summing corrections for single detector systems. - Highlights: • Method for incorporating X-ray summing into coincidence measurements developed. • Calculation routines have been extended to an arbitrarily large detector system, and re-written to take advantage of multiple computing cores. • Data collected in list-mode with all events timestamped for offline coincidence analysis. • Coincidence analysis of environmental samples will dramatically improve the detection sensitivity achievable.

33 CFR 230.17 - Filing requirements.

Science.gov (United States)

2010-07-01

... supplement, district commanders will establish a time schedule for each step of the process based upon considerations listed in 40 CFR 1501.8 and upon other management considerations. The time required from the... reviews by division and the incorporation of division's comments in the EIS. HQUSACE and/or division will...

77 FR 3152 - New Mexico: Final Authorization of State-Initiated Changes and Incorporation-by-Reference of...

Science.gov (United States)

2012-01-23

... relations, Penalties, Reporting and recordkeeping requirements, Water pollution control, Water supply... Mexico: Final Authorization of State-Initiated Changes and Incorporation-by-Reference of State Hazardous.... SUMMARY: During a review of New Mexico's regulations, the EPA identified a variety of State-initiated...

15 CFR 923.45 - Air and water pollution control requirements.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Air and water pollution control....45 Air and water pollution control requirements. The program must incorporate, by reference or otherwise, all requirements established by the Federal Water Pollution Control Act, as amended (Clean Water...

Deuterium incorporation into Escherichia-coli proteins

DEFF Research Database (Denmark)

Lederer, H.; May, R. P.; Kjems, Jørgen

1986-01-01

Neutron small-angle scattering studies of single protein subunits in a protein-DNA complex require the adjustment of the neutron scattering-length densities of protein and DNA, which is attainable by specific deuteration of the protein. The neutron scattering densities of unlabelled DNA and DNA......-dependent RNA polymerase of Escherichia coli match when RNA polymerase is isolated from cells grown in a medium containing 46% D2O and unlabelled glucose as carbon source. Their contrasts vanish simultaneously in a dialysis buffer containing 65% D2O. An expression was evaluated which allows the calculation...... of the degree of deuteration and match point of any E. coli protein from the D2O content of the growth medium, taking the 2H incorporation into RNA polymerase amino acids to be representative for all amino acids in E. coli proteins. The small-angle scattering results, on which the calculation of the degree...

Utility requirements for HTGRs

International Nuclear Information System (INIS)

Nicholls, D.R.

1997-01-01

Eskom, the state utility of South Africa, is currently evaluating the technical and economic feasibility of the helium cooled Pebble Bed Modular Reactor with a closed cycle gas turbine power conversion system for future power generating additions to its electric system. This paper provides an overview of the Eskom system including the needs of the utility for future generation capacity and the key performance requirements necessary for incorporation of this gas cooled reactor plant. (author)

Requirements Modeling with Agent Programming

Science.gov (United States)

Dasgupta, Aniruddha; Krishna, Aneesh; Ghose, Aditya K.

Agent-oriented conceptual modeling notations are highly effective in representing requirements from an intentional stance and answering questions such as what goals exist, how key actors depend on each other, and what alternatives must be considered. In this chapter, we review an approach to executing i* models by translating these into set of interacting agents implemented in the CASO language and suggest how we can perform reasoning with requirements modeled (both functional and non-functional) using i* models. In this chapter we particularly incorporate deliberation into the agent design. This allows us to benefit from the complementary representational capabilities of the two frameworks.

Temporal succession in carbon incorporation from macromolecules by particle-attached bacteria in marine microcosms: Particle-attached bacteria incorporating organic carbon

Energy Technology Data Exchange (ETDEWEB)

Mayali, Xavier [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Stewart, Benjamin [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mabery, Shalini [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Weber, Peter K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-12-21

Here, we investigated bacterial carbon assimilation from stable isotope-labelled macromolecular substrates (proteins; lipids; and two types of polysaccharides, starch and cellobiose) while attached to killed diatom detrital particles during laboratory microcosms incubated for 17 days. Using Chip-SIP (secondary ion mass spectrometry analysis of RNA microarrays), we identified generalist operational taxonomic units (OTUs) from the Gammaproteobacteria, belonging to the genera Colwellia, Glaciecola, Pseudoalteromonas and Rheinheimera, and from the Bacteroidetes, genera Owenweeksia and Maribacter, that incorporated the four tested substrates throughout the incubation period. Many of these OTUs exhibited the highest isotope incorporation relative to the others, indicating that they were likely the most active. Additional OTUs from the Gammaproteobacteria, Bacteroidetes and Alphaproteobacteria exhibited generally (but not always) lower activity and did not incorporate all tested substrates at all times, showing species succession in organic carbon incorporation. We also found evidence to suggest that both generalist and specialist OTUs changed their relative substrate incorporation over time, presumably in response to changing substrate availability as the particles aged. This pattern was demonstrated by temporal succession from relatively higher starch incorporation early in the incubations, eventually switching to higher cellobiose incorporation after 2 weeks.

Optimisation of petroleum refinery water network systems retrofit incorporating reuse, regeneration and recycle strategies

Energy Technology Data Exchange (ETDEWEB)

Khor, Cheng Seong; Shah, Nilay [Imperial College London (United Kingdom); Mahadzir, Shuhaimi [Universiti Teknologi Petronas (Malaysia); Elkamel, Ali [University of Waterloo (Canada)

2012-02-15

Increasingly strict environmental regulations have given rise to higher requirements for operating efficiency and optimization and water has become a vital resource in the refining process and allied industries. Due to this high demand for water, plants may be exposed to supply interruptions and shortages in the future. Major concerns in the petroleum refining industry are the scarcity of fresh water supply and increasingly rigid rules on wastewater discharge, which have resulted from concerns over the environmental impact. This paper presents the efforts made to develop an optimization framework for design of petroleum refinery water network systems and retrofitting that incorporates reuse, regeneration, and recycling strategies. This framework includes the complementary advantage of water pinch analysis (WPA). Water minimization strategies were incorporated as first postulates in a superstructural representation that includes all feasible flow-sheet options for taking advantage of water reuse, regeneration and recycling opportunities. Additionally, a post-optimization analysis was carried out to evaluate the repeated treatment processes required to identify the most efficient retrofit option.

Aspects of the incorporation of spatial data into radioecological and restoration analysis

International Nuclear Information System (INIS)

Beresford, N.A.; Wright, S.M.; Howard, B.J.; Crout, N.M.J.; Arkhipov, A.; Voigt, G.

2002-01-01

In the last decade geographical information systems have been increasingly used to incorporate spatial data into radioecological analysis. This has allowed the development of models with spatially variable outputs. Two main approaches have been adopted in the development of spatial models. Empirical Tag based models applied across a range of spatial scales utilize underlying soil type maps and readily available radioecological data. Soil processes can also be modelled to allow the dynamic prediction of radionuclide soil to plant transfer. We discuss a dynamic semi-mechanistic radiocaesium soil to plant-transfer model, which utilizes readily available spatially variable soil parameters. Both approaches allow the identification of areas that may be vulnerable to radionuclide deposition, therefore enabling the targeting of intervention measures. Improved estimates of radionuclide fluxes and ingestion doses can be achieved by incorporating spatially varying inputs such as agricultural production and dietary habits in to these models. In this paper, aspects of such models, including data requirements, implementation and outputs are discussed and critically evaluated. The relative merits and disadvantages of the two spatial model approaches adopted within radioecology are discussed. We consider the usefulness of such models to aid decision-makers and access the requirements and potential of further application within radiological protection. (author)

Early Quantitative Assessment of Non-Functional Requirements

NARCIS (Netherlands)

Kassab, M.; Daneva, Maia; Ormandjieva, O.

2007-01-01

Non-functional requirements (NFRs) of software systems are a well known source of uncertainty in effort estimation. Yet, quantitatively approaching NFR early in a project is hard. This paper makes a step towards reducing the impact of uncertainty due to NRF. It offers a solution that incorporates

Measurement of trifluralin volatilization in the field: Relation to soil residue and effect of soil incorporation

International Nuclear Information System (INIS)

Bedos, C.; Rousseau-Djabri, M.F.; Gabrielle, B.; Flura, D.; Durand, B.; Barriuso, E.; Cellier, P.

2006-01-01

Volatilization may represent a major dissipation pathway for pesticides applied to soils or crops. A field experiment (September, 2002), consisted in volatilization fluxes measurements during 6 days, covering the periods before and after soil incorporation carried out 24 h after trifluralin spraying on bare soil. Evolution of concentration in soil was measured during 101 days, together with soil physical and meteorological variables. Volatilization fluxes were very high immediately after application (1900 ng m -2 s -1 ), decreased down to 100 ng m -2 s -1 in the following 24 h. Soil incorporation strongly abated trifluralin concentration in the air. 99% of the total volatilization losses recorded over the 6 days following application occurred before incorporation. Volatilization fluxes evidenced a diurnal cycle driven by environmental conditions. Soil trifluralin residues could still be quantified 101 days after application. Our results highlight the caution required when using soil degradation half-life values in the field for volatile compounds. - Losses by volatilization contribute significantly to soil dissipation of the herbicide trifluralin before its soil incorporation

Challenges for Incorporation of additional safeguards requirements in a fuel fabrication facility in Japan

International Nuclear Information System (INIS)

Ishikawa, Tadatsugu; Suzuki, Katsuyuki

2004-01-01

Recent introduction of strengthened SG measure (i.e.: SNRI (Short Notice Random Inspection)) necessitated semi-real-time reporting including non-prescribed data in the FA for vital processes. These requirements have been bet by endeavors of both Inspectorates and operators. Using the integrated databases it will also be possible to produce most of reports required for safeguards purposes on a semi-real time basis, albeit with additional investment for softwares. However, in order to fully enjoy the advancements of information technology it is necessary to streamline the legal and procedural platform in addition to technical matters, in particular what are 'must' for safeguards and abolish if they are not really needed anymore. (author)

Quantification of N-acetylcysteamine activated methylmalonate incorporation into polyketide biosynthesis

Directory of Open Access Journals (Sweden)

Stephan Klopries

2013-04-01

Full Text Available Polyketides are biosynthesized through consecutive decarboxylative Claisen condensations between a carboxylic acid and differently substituted malonic acid thioesters, both tethered to the giant polyketide synthase enzymes. Individual malonic acid derivatives are typically required to be activated as coenzyme A-thioesters prior to their enzyme-catalyzed transfer onto the polyketide synthase. Control over the selection of malonic acid building blocks promises great potential for the experimental alteration of polyketide structure and bioactivity. One requirement for this endeavor is the supplementation of the bacterial polyketide fermentation system with tailored synthetic thioester-activated malonates. The membrane permeable N-acetylcysteamine has been proposed as a coenzyme A-mimic for this purpose. Here, the incorporation efficiency into different polyketides of N-acetylcysteamine activated methylmalonate is studied and quantified, showing a surprisingly high and transferable activity of these polyketide synthase substrate analogues in vivo.

43 CFR 46.110 - Incorporating consensus-based management.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Incorporating consensus-based management... § 46.110 Incorporating consensus-based management. (a) Consensus-based management incorporates direct... carry out those plans and activities. For the purposes of this Part, consensus-based management involves...

Incorporation of an item/material attribute system into PAMTRAK

International Nuclear Information System (INIS)

Anspach, D.A.; Waddoups, I.G.; Fox, E.T.

1994-01-01

The Department of Energy (DOE) mission is changing due to the number of nuclear weapon reductions by the United States and the former Soviet Union with long-term storage requirements for DOE sites increasing. New technology to ensure the integrity of special nuclear material (SNM) in storage is available to sites to supplement manual physical inventories. This allows them to decrease operating costs while keeping radiation exposure at minimal levels. We have developed a generic, real time, personnel tracking and material monitoring system named PAMTRAK. Such a system can significantly reduce the number of required, manual physical inventories at DOE sites while increasing assurance that an insider has not diverted or stolen material. Until recently Pamtrak used only material monitoring devices that provided location/containment attributes. However, Westinghouse Electric Corp. and Metrox, Inc. have recently developed hard-wired item/material attribute systems that monitor both temperature and weight. We have incorporated both of these systems into PAMTRAK. If a site employed one of these item/material attribute systems, it could decrease its manual inventory frequency to three years. This paper describes how a site might implement such a system to meet the DOE's requirements

Calculating Electrical Requirements for Direct Current Electric Actuators

Science.gov (United States)

2017-11-29

equation 1. The moment of inertia must be a composite value of all rotating masses including the load, actuator components, and the motor rotor . Both...to the torque required to accelerate, there is a load torque, TL. The load torque is a composite value representing the torque required to overcome...values can typically be incorporated into a conservative composite efficiency value that provides reasonably accurate results. Since this report

Incorporating uncertainty in RADTRAN 6.0 input files.

Energy Technology Data Exchange (ETDEWEB)

Dennis, Matthew L.; Weiner, Ruth F.; Heames, Terence John (Alion Science and Technology)

2010-02-01

Uncertainty may be introduced into RADTRAN analyses by distributing input parameters. The MELCOR Uncertainty Engine (Gauntt and Erickson, 2004) has been adapted for use in RADTRAN to determine the parameter shape and minimum and maximum of the distribution, to sample on the distribution, and to create an appropriate RADTRAN batch file. Coupling input parameters is not possible in this initial application. It is recommended that the analyst be very familiar with RADTRAN and able to edit or create a RADTRAN input file using a text editor before implementing the RADTRAN Uncertainty Analysis Module. Installation of the MELCOR Uncertainty Engine is required for incorporation of uncertainty into RADTRAN. Gauntt and Erickson (2004) provides installation instructions as well as a description and user guide for the uncertainty engine.

Exploiting strain to enhance the Bi incorporation in GaAs-based III/V semiconductors using MOVPE

Science.gov (United States)

Nattermann, L.; Ludewig, P.; Sterzer, E.; Volz, K.

2017-07-01

Bi containing III/V semiconductors are frequently mentioned for their importance as part of the next generation of optoelectronic devices. Bi containing ternary and quaternary materials like Ga(AsBi), Ga(NAsBi) or Ga(PAsBi) are promising candidates to meet the requirements for new laser structures for telecommunications and solar cell applications. However, in previous studies it was determined that the incorporation of sufficient amounts of Bi still poses a challenge, especially when using MOVPE (metalorganic vapour phase epitaxy) as the growth technique. In order to figure out which mechanisms are responsible for the limitation of Bi incorporation, this work deals with the question of whether there is a relationship between strain, induced by the large Bi atoms, and the saturation level of Bi incorporation in Ga(AsBi). Ga(NAsBi) structures were grown by MOVPE at a low temperature, 400 °C, and compared to Ga(PAsBi) as well as Ga(AsBi) growth. By using the two group V atoms P and N, which have a smaller covalent radius than Bi, the effect of local strain compensation was investigated systematically. The comparison of Bi incorporation in the two quaternary materials systems proved the importance of local strain for the limitation of Bi incorporation, in addition to other effects, like Bi surface coverage and hydrocarbon groups at the growth surface. This, of course, also opens up ways to strain-state-engineer the Bi incorporation in semiconductor alloys.

Authorization basis requirements comparison report

Energy Technology Data Exchange (ETDEWEB)

Brantley, W.M.

1997-08-18

The TWRS Authorization Basis (AB) consists of a set of documents identified by TWRS management with the concurrence of DOE-RL. Upon implementation of the TWRS Basis for Interim Operation (BIO) and Technical Safety Requirements (TSRs), the AB list will be revised to include the BIO and TSRs. Some documents that currently form part of the AB will be removed from the list. This SD identifies each - requirement from those documents, and recommends a disposition for each to ensure that necessary requirements are retained when the AB is revised to incorporate the BIO and TSRs. This SD also identifies documents that will remain part of the AB after the BIO and TSRs are implemented. This document does not change the AB, but provides guidance for the preparation of change documentation.

Authorization basis requirements comparison report

International Nuclear Information System (INIS)

Brantley, W.M.

1997-01-01

The TWRS Authorization Basis (AB) consists of a set of documents identified by TWRS management with the concurrence of DOE-RL. Upon implementation of the TWRS Basis for Interim Operation (BIO) and Technical Safety Requirements (TSRs), the AB list will be revised to include the BIO and TSRs. Some documents that currently form part of the AB will be removed from the list. This SD identifies each - requirement from those documents, and recommends a disposition for each to ensure that necessary requirements are retained when the AB is revised to incorporate the BIO and TSRs. This SD also identifies documents that will remain part of the AB after the BIO and TSRs are implemented. This document does not change the AB, but provides guidance for the preparation of change documentation

What Is "Competence" and How Should Education Incorporate New Technology's Tools to Generate "Competent Civic Agents"

Science.gov (United States)

Haste, Helen

2009-01-01

This article addresses the competences needed in twenty-first-century life, especially in relation to civic participation, and the educational requirements to foster them in young people. New technologies are widely used by young people for informal social interaction, video game-playing and giving voice to their views. Incorporation of these…

Photosynthetic incorporation of 14C by Stevia rebaudiana

International Nuclear Information System (INIS)

Ferraresi, M. de L.; Ferraresi Filho, O.; Bracht, A.

1985-01-01

The photosynthetic incorporation of 14 by Stevia rebaudiana specimens was investigated. The 14 C incorporation, when the isotope was furnished to the plant in form of 14 CO 2 , was rapid. After 24 hours, the radioactivity has been incorporated into a great number of compounds including pigments, terpenes, glucose, cellulose and also stevioside and its derivatives. (M.A.C.) [pt

Incorporation of safety interlocks in commercial robotics for handling of nuclear materials

International Nuclear Information System (INIS)

Moore, F.W.

1986-01-01

Current robotic systems have been developed primarily for the automotive and electronic industry. The adaptation of these commercial robotic systems to applications in the manufacturing of nuclear fuel requires the addition of safety interlocks as to the handling and accountability of nuclear materials. Also, additional safety interlocks are required when the robots are operated in containment enclosures that are environmentally sealed. Interlocks have been incorporated into a commercial robot. The robotic system has been installed in the containment enclosure as part of the pellet storage subsystem into the Secure Automated Fabrication (SAF) facility currently being built by Westinghouse Hanford Company (WHC) for the US Department of Energy (DOE). The system has been installed in the Fuel Cycle Plant and is scheduled for initial operational testing in 1986

Incorporation of safety interlocks in commercial robotics for handling of nuclear materials

International Nuclear Information System (INIS)

Moore, F.W.

1986-01-01

The adaptation of commercial robotic systems to applications in the manufacturing of nuclear fuel has required the addition of safety interlocks as to the handling and accountability of nuclear materials. Also, additional safety interlocks are required when the robots are operated in containment enclosures that are environmentally sealed. Interlocks have been incorporated in a commercial robot which was modified and with additional interlocks into the existing robotic control system. The robotic system has been installed in the containment enclosure as part of the pellet storage subsystem in the Secure Automated Fabrication facility currently being built by Westinghouse Hanford Company for the US Department of Energy. The system has been installed in the Fuel Cycle Plant and is scheduled for initial operational testing in 1986

Performance requirements for the double-shell tank system: Phase 1

International Nuclear Information System (INIS)

Claghorn, R.D.

1998-01-01

This document establishes performance requirements for the double-shell tank system. These requirements, in turn, will be incorporated in the System Specification for the Double-Shell Tank System (Grenard and Claghorn 1998). This version of the document establishes requirements that are applicable to the first phase (Phase 1) of the Tank Waste Remediation System (TWRS) mission described in the TWRS Mission Analysis Report (Acree 1998). It does not specify requirements for either the Phase 2 mission or the double-shell tank system closure period

75 FR 52472 - Spectrum Requirements for Advanced Medical Technologies

Science.gov (United States)

2010-08-26

... medical devices. Under this framework, the rules for MedRadio service incorporates the MICS ``core'' band... Requirements for Advanced Medical Technologies AGENCY: Federal Communications Commission. ACTION: Final rule.... (Medtronic) regarding rules for the Medical Device Radiocommunication (MedRadio) service. The Commission...

Rapid mass spectrometric analysis of 15N-Leu incorporation fidelity during preparation of specifically labeled NMR samples

DEFF Research Database (Denmark)

Truhlar, Stephanie M E; Cervantes, Carla F; Torpey, Justin W

2008-01-01

. MALDI TOF-TOF MS/MS data provide additional information that shows where the "extra" (15)N labels are incorporated, which can be useful in confirming ambiguous assignments. The described procedure provides a rapid technique to monitor the fidelity of selective labeling that does not require a lot...

48 CFR 2852.102-270 - Incorporation in full text.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Incorporation in full text... 2852.102-270 Incorporation in full text. JAR provisions or clauses shall be incorporated in solicitations and contracts in full text. ...

40 CFR 76.4 - Incorporation by reference.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Incorporation by reference. 76.4 Section 76.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES EMISSION REDUCTION PROGRAM § 76.4 Incorporation by reference. (a) The...

48 CFR 1952.102-2 - Incorporation in full text.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Incorporation in full text... Clauses 1952.102-2 Incorporation in full text. All IAAR provisions and clauses shall be incorporated in solicitations and/or contracts in full text. ...

75 FR 59321 - Reports, Forms, and Recordkeeping Requirements

Science.gov (United States)

2010-09-27

... itself of the exemption. The rule requires: ``S595.6 Modifier Identification (a) Any motor vehicle repair... individual, partnership, or corporate name of the motor vehicle repair business. (2) Residence address of the motor vehicle repair business and State of incorporation if applicable. (3) A statement that the motor...

22 CFR 212.13 - Incorporation by reference.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Incorporation by reference. 212.13 Section 212.13 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT PUBLIC INFORMATION Publication in the Federal Register § 212.13 Incorporation by reference. For purposes of this subpart B, USAID matters which...

Effect of organoclay incorporation on dental resin morphology

International Nuclear Information System (INIS)

Oliveira, Nadja M.S.; Reis, Romulo P.B.; Leite, Itamara F.; Morais, Crislene R.S.; Silva, Suedina M.L.

2009-01-01

The objective of the present work was to incorporate nanosilicates in commercial dental resins in order to prepare dental nanocomposites competitive as commercial nanoparticulates dental resins. Thus, a silicate, Cloisite 20A (C20A), was incorporated in a microhybrid dental resin (Z100) and morphological properties of the nanocomposites evaluated as a function of the incorporation method and the amount of filler employed. The samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results evidence that nanocomposites have been obtained and according to SEM results, the morphology of microhybrid resin was modified when C20A nanoparticulate was incorporated improve the size distribution and reduce the agglomeration of the particles. (author)

40 CFR 98.164 - Monitoring and QA/QC requirements.

Science.gov (United States)

2010-07-01

... Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and... Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal (incorporated by reference, see... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Hydrogen Production § 98.164 Monitoring and QA/QC requirements...

40 CFR 59.412 - Incorporations by reference.

Science.gov (United States)

2010-07-01

... Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants, incorporation by reference approved for § 59.401, Nuclear coating. (5) ASTM Method D 4082-89, Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants, incorporation...

An efficient protocol for incorporation of an unnatural amino acid in perdeuterated recombinant proteins using glucose-based media

Energy Technology Data Exchange (ETDEWEB)

Venditti, Vincenzo; Fawzi, Nicolas L.; Clore, G. Marius, E-mail: mariusc@mail.nih.gov [National Institutes of Health, Laboratory of Chemical Physics, National Institute of Diabetes and Digestive and Kidney Diseases (United States)

2012-03-15

The in vivo incorporation of unnatural amino acids into proteins is a well-established technique requiring an orthogonal tRNA/aminoacyl-tRNA synthetase pair specific for the unnatural amino acid that is incorporated at a position encoded by a TAG amber codon. Although this technology provides unique opportunities to engineer protein structures, poor protein yields are usually obtained in deuterated media, hampering its application in the protein NMR field. Here, we describe a novel protocol for incorporating unnatural amino acids into fully deuterated proteins using glucose-based media (which are relevant to the production, for example, of amino acid-specific methyl-labeled proteins used in the study of large molecular weight systems). The method consists of pre-induction of the pEVOL plasmid encoding the tRNA/aminoacyl-tRNA synthetase pair in a rich, H{sub 2}O-based medium prior to exchanging the culture into a D{sub 2}O-based medium. Our protocol results in high level of isotopic incorporation ({approx}95%) and retains the high expression level of the target protein observed in Luria-Bertani medium.

Incorporation of a Chemical Equilibrium Equation of State into LOCI-Chem

Science.gov (United States)

Cox, Carey F.

2005-01-01

Renewed interest in development of advanced high-speed transport, reentry vehicles and propulsion systems has led to a resurgence of research into high speed aerodynamics. As this flow regime is typically dominated by hot reacting gaseous flow, efficient models for the characteristic chemical activity are necessary for accurate and cost effective analysis and design of aerodynamic vehicles that transit this regime. The LOCI-Chem code recently developed by Ed Luke at Mississippi State University for NASA/MSFC and used by NASA/MSFC and SSC represents an important step in providing an accurate, efficient computational tool for the simulation of reacting flows through the use of finite-rate kinetics [3]. Finite rate chemistry however, requires the solution of an additional N-1 species mass conservation equations with source terms involving reaction kinetics that are not fully understood. In the equilibrium limit, where the reaction rates approach infinity, these equations become very stiff. Through the use of the assumption of local chemical equilibrium the set of governing equations is reduced back to the usual gas dynamic equations, and thus requires less computation, while still allowing for the inclusion of reacting flow phenomenology. The incorporation of a chemical equilibrium equation of state module into the LOCI-Chem code was the primary objective of the current research. The major goals of the project were: (1) the development of a chemical equilibrium composition solver, and (2) the incorporation of chemical equilibrium solver into LOCI-Chem. Due to time and resource constraints, code optimization was not considered unless it was important to the proper functioning of the code.

Incorporating Topography into Landscape Continuity Analysis—Hong Kong Island as a Case Study

OpenAIRE

Levin, Noam; Singer, Matan; Lai, Poh

2013-01-01

The increase in population and the expansion of built-up areas into natural and agricultural areas results in more than just loss of open spaces surrounding cities. Reduced accessibility to nature, visual intrusion of buildings into natural viewsheds, and changes in runoff requires us to assess these impacts on open spaces. Our aim in this paper was to examine and demonstrate how topography can be incorporated into modeling and analyzing environmental impacts of cities. Taking Hong Kong Islan...

Differentiating leucine incorporation of

NARCIS (Netherlands)

Yokokawa, T.; Sintes, E.; de Corte, D.; Olbrich, K.; Herndl, G.J.

2012-01-01

The abundance (based on catalyzed reporter deposition-fluorescence in situ hybrid ization, CARD-FISH) and leucine incorporation rates of Archaea and Bacteria were determined throughout the water column in the eastern Atlantic. Bacteria dominated throughout the water column, although their

From Unnatural Amino Acid Incorporation to Artificial Metalloenzymes

KAUST Repository

Makki, Arwa A.

2016-12-04

purification protocol was developed first. The purification protocol uses a combination of heat precipitation and three-phase-partitioning (TPP). It provides high yield and purity without requiring any tag. Building on the favourable properties of fluorescent proteins, the non-metal binding, highly stable host-scaffold mTFP* was generated through rational design. The incorporation of artificial metal binding sites, the allowed the selective formation of artificial metalloenzymes, which show catalytic activity and moderat to good chiral induction in the Diels-Alder Cyclization and Friedl-Crafts Acylation Chapter 4 of the thesis describes the use of UAA incorporation to generate artificial metal binding sites. Computational studies and homology modelling successfully highlighted several positions in mTFP*, which are particularly suitable for UAA incorporation without any disruption of the protein structure. Application of a functional orthogonal aaRS/tRNA pair developed by P.G. Schultz and co-workers allowed the site-specific incorporation of UAAs in the host protein framework. Changes in fluorescence intensity revealed preferences of varieous UAAs for specific incorporations sites. The three UAAs, pIF, pAzF, and pEynF were incorporated into mTFP* in good yields, while pBF does only deliver low protein yields. A successfully established on-protein MIYAURA borylation reaction allows convert well-incorporated pIF into pBF circumventing the problem of low expression yields. Chapter 5 details the use of the azide-functionality of pAzF for the bioconjugation of artificial metal-binding cofactors through CuAAC. The triazole ring formed during this reaction serves as an additional moderate σ -donor/π –acceptor ligand of the metal binding site. We demonstrated the potential of site-specific modifications within the protein host with a versatile subset of artificial cofactors. Following transition metal binding, the newly created metal sites show catalytic activities that nature does

In vitro performance of Ag-incorporated hydroxyapatite and its adhesive porous coatings deposited by electrostatic spraying.

Science.gov (United States)

Gokcekaya, Ozkan; Webster, Thomas J; Ueda, Kyosuke; Narushima, Takayuki; Ergun, Celaletdin

2017-08-01

Bacterial infection of implanted materials is a significant complication that might require additional surgical operations for implant retrieval. As an antibacterial biomaterial, Ag-containing hydroxyapatite (HA) may be a solution to reduce the incidences of implant associated infections. In this study, pure, 0.2mol% and 0.3mol% Ag incorporated HA powders were synthesized via a precipitation method. Colloidal precursor dispersions prepared from these powders were used to deposit porous coatings onto titanium and stainless steel substrates via electrostatic spraying. The porous coating layers obtained with various deposition times and heat treatment conditions were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Scratch tests were conducted to assess the adhesion strength of the coating. Antibacterial activity of Ag-incorporated HA was tested towards Escherichia coli (E. coli) at various incubation times. Osteoblast adhesion on Ag-incorporated HA was evaluated to assess biocompatibility. Improvement in adhesion strength of the coating layer was observed after the heat treatment process due to mutual ionic diffusion at the interface. The Ag-incorporated HA killed all viable E. coli after 24h of incubation, whereas no antibacterial activity was detected with pure HA. In addition, in vitro cell culture tests demonstrated osteoblast adhesion similar to pure HA, which indicated good cytocompatibility. In summary, results of this study provided significant promise for the future study of Ag-incorporated HA for numerous medical applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Recommendation for the application of the guideline for incorporation monitoring in nuclear medicine; Empfehlung fuer die Anwendung der Richtlinie zur Inkorporationsueberwachung in der Nuklearmedizin

Energy Technology Data Exchange (ETDEWEB)

Schoenmuth, T. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V. (VKTA), Dresden (Germany); Dalheimer, A. [Bundesamt fuer Strahlenschutz (Germany); Eckardt, J. [Universitaetsklinikum Muenster (Germany); Eschner, W. [Universitaetsklinikum Koeln (Germany); Kratzel, U. [LfU Bayern (Germany); Lassmann, M. [Universitaetsklinikum Wuerzburg (Germany); Lauterbach, H. [Universitaetsklinikum Jena (Germany); Dettmann, K.

2009-07-01

For the use of open radioactive materials in the nuclear medicine a recommendation should give assistance by the judgement of the draught suggested by the user according to the guideline 'Incorporation monitoring' to the responsible authorities. To the evaluation of the requirement for a regular monitoring the document delivers recommendations for incorporation factors or use of threshold value measurements. (orig.)

Physical and Antimicrobial Properties of Starch-PVA Blend Films as Affected by the Incorporation of Natural Antimicrobial Agents

Directory of Open Access Journals (Sweden)

Amalia Cano

2015-12-01

Full Text Available In this work, active films based on starch and PVA (S:PVA ratio of 2:1 were developed by incorporating neem (NO and oregano essential oils (OEO. First, a screening of the antifungal effectiveness of different natural extracts (echinacea, horsetail extract, liquid smoke and neem seed oil against two fungus (P. expansum and A. niger was carried out. The effect of NO and OEO incorporation on the films’ physical and antimicrobial properties was analyzed. Only composite films containing OEO exhibited antibacterial and antifungal activity. Antibacterial activity occurred at low OEO concentration (6.7%, while antifungal effect required higher doses of OEO in the films. Incorporation of oils did not notably affect the water sorption capacity and water vapor barrier properties of S-PVA films, but reduced their transparency and gloss, especially at the highest concentrations. The mechanical response of the S-PVA films was also negatively affected by oil incorporation but this was only relevant at the highest oil ratio (22%. S-PVA films with 6.7% of OEO exhibited the best physical properties, without significant differences with respect to the S-PVA matrix, while exhibiting antibacterial activity. Thus, the use of OEO as a natural antimicrobial incorporated into starch-PVA films represents a good and novel alternative in food packaging applications.

Physical and Antimicrobial Properties of Starch-PVA Blend Films as Affected by the Incorporation of Natural Antimicrobial Agents.

Science.gov (United States)

Cano, Amalia; Cháfer, Maite; Chiralt, Amparo; González-Martínez, Chelo

2015-12-26

In this work, active films based on starch and PVA (S:PVA ratio of 2:1) were developed by incorporating neem (NO) and oregano essential oils (OEO). First, a screening of the antifungal effectiveness of different natural extracts (echinacea, horsetail extract, liquid smoke and neem seed oil) against two fungus ( P. expansum and A. niger ) was carried out. The effect of NO and OEO incorporation on the films' physical and antimicrobial properties was analyzed. Only composite films containing OEO exhibited antibacterial and antifungal activity. Antibacterial activity occurred at low OEO concentration (6.7%), while antifungal effect required higher doses of OEO in the films. Incorporation of oils did not notably affect the water sorption capacity and water vapor barrier properties of S-PVA films, but reduced their transparency and gloss, especially at the highest concentrations. The mechanical response of the S-PVA films was also negatively affected by oil incorporation but this was only relevant at the highest oil ratio (22%). S-PVA films with 6.7% of OEO exhibited the best physical properties, without significant differences with respect to the S-PVA matrix, while exhibiting antibacterial activity. Thus, the use of OEO as a natural antimicrobial incorporated into starch-PVA films represents a good and novel alternative in food packaging applications.

Concentration-Dependent Patterns of Leucine Incorporation by Coastal Picoplankton

Science.gov (United States)

Alonso, Cecilia; Pernthaler, Jakob

2006-01-01

Coastal pelagic environments are believed to feature concentration gradients of dissolved organic carbon at a microscale, and they are characterized by pronounced seasonal differences in substrate availability for the heterotrophic picoplankton. Microbial taxa that coexist in such habitats might thus differ in their ability to incorporate substrates at various concentrations. We investigated the incorporation patterns of leucine in four microbial lineages from the coastal North Sea at concentrations between 0.1 and 100 nM before and during a spring phytoplankton bloom. Community bulk incorporation rates and the fraction of leucine-incorporating cells in the different populations were analyzed. Significantly fewer bacterial cells incorporated the amino acid before (13 to 35%) than during (23 to 47%) the bloom at all but the highest concentration. The incorporation rate per active cell in the prebloom situation was constant above 0.1 nM added leucine, whereas it increased steeply with substrate concentration during the bloom. At both time points, a high proportion of members of the Roseobacter clade incorporated leucine at all concentrations (55 to 80% and 86 to 94%, respectively). In contrast, the fractions of leucine-incorporating cells increased substantially with substrate availability in bacteria from the SAR86 clade (8 to 31%) and from DE cluster 2 of the Flavobacteria-Sphingobacteria (14 to 33%). The incorporation patterns of marine Euryarchaeota were between these extremes (30 to 56% and 48 to 70%, respectively). Our results suggest that the contribution of microbial taxa to the turnover of particular substrates may be concentration dependent. This may help us to understand the specific niches of coexisting populations that appear to compete for the same resources. PMID:16517664

Requirements engineering for trust management: Model, methodology, and reasoning

NARCIS (Netherlands)

Giorgini, P.; Massacci, F.; Mylopoulos, J.; Zannone, N.

2006-01-01

A number of recent proposals aim to incorporate security engineering into mainstream software engineering. Yet, capturing trust and security requirements at an organizational level, as opposed to an IT system level, and mapping these into security and trust management policies is still an open

Defining and incorporating basic nursing care actions into the electronic health record.

Science.gov (United States)

Englebright, Jane; Aldrich, Kelly; Taylor, Cathy R

2014-01-01

To develop a definition of basic nursing care for the hospitalized adult patient and drive uptake of that definition through the implementation of an electronic health record. A team of direct care nurses, assisted by subject matter experts, analyzed nursing theory and regulatory requirements related to basic nursing care. The resulting list of activities was coded using the Clinical Care Classification (CCC) system and incorporated into the electronic health record system of a 170-bed community hospital. Nine basic nursing care activities were identified as a result of analyzing nursing theory and regulatory requirements in the framework of a hypothetical "well" patient. One additional basic nursing care activity was identified following the pilot implementation in the electronic health record. The pilot hospital has successfully passed a post-implementation regulatory review with no recommendations related to the documentation of basic patient care. This project demonstrated that it is possible to define the concept of basic nursing care and to distinguish it from the interdisciplinary, problem-focused plan of care. The use of the electronic health record can help clarify, document, and communicate basic care elements and improve uptake among nurses. This project to define basic nursing care activities and incorporate into the electronic health record represents a first step in capturing meaningful data elements. When fully implemented, these data could be translated into knowledge for improving care outcomes and collaborative processes. © 2013 Sigma Theta Tau International.

[Modeling of the financial reserves required by the livestock disease compensation fund of Lower Saxony for rebates in the course of disease outbreaks incorporating spatial restriction zones].

Science.gov (United States)

Denzin, Nicolai; Gerdes, Ursula

2015-01-01

One of the tasks of the livestock disease compensation funds of the federal states in Germany is the financial compensation of livestock holders for livestock losses and costs incurred for disease control measures due to certain diseases. Usually, one half of these services are financed through financial reserves built up with the contributions paid by the owners of the respective animal species. The other half is covered by the federal state itself. But there is hardly any reference to how to calculate aforementioned financial reserves. Basically, following an approach presented recently regarding estimations concerning the compensation fund of the federal state of Saxony-Anhalt, in a stochastic modeling of the required reserves concerning the fund of Lower Saxony the anticipated costs within the spatial restriction zones allocated to outbreaks were incorporated for the first time. The overall costs (including the federal state's stakes), the share of the comnensation fund (required reserves) and the the partial costs for a total of 25 categories and subcategories and subcategories of livestock species making up the latter were estimated. It became evident that overall costs/the share of the fund were particularly determined among the diseases by foot-and-mouth disease and among the cost factors by the costs incurred for the compensation of livestock value within the areas surrounding the outbreaks in which all susceptible animals are killed (culling zone). The 80th, 90 and 95th percentile of the established probability distribution of the overall costs referred to a financial volume of about 312, 409 and 540 million euro, while the respective percentiles of the probability distribution of the required reserves of the compensation fund amounted to 175, 225 and 296 million euro.

Incorporation of fluconazole in copolymer PMMA-g-PEG derivatives

International Nuclear Information System (INIS)

Silveira, B.M.; Santos, V.M.R. dos; Novack, K.M.; Lopes, S.A.

2014-01-01

The graft copolymer PMMA-g-PEG went through chemical transformations in its chain through acetylation, halogenation, methylation and esterification followed by hydrolysis reactions. Subsequently, the copolymer PMMA-g-PEG derivatives passed through the process of emulsification and incorporation of the drug fluconazole. Derivatives copolymers were characterized by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) after incorporation in order to evaluate their effectiveness. The efficiency of incorporation was observed and it was also verified that the complexity of polymer chain influence in the incorporated fluconazole content. (author)

Incorporating Feminist Standpoint Theory

DEFF Research Database (Denmark)

Ahlström, Kristoffer

2005-01-01

As has been noted by Alvin Goldman, there are some very interesting similarities between his Veritistic Social Epistemology (VSE) and Sandra Harding’s Feminist Standpoint Theory (FST). In the present paper, it is argued that these similarities are so significant as to motivate an incorporation...

Uranyl incorporation into calcite and aragonite: XAFS and luminescence studies

International Nuclear Information System (INIS)

Reeder, R.J.; Nugent, M.; Lamble, G.M.; Tait, C.D.; Morris, D.E.

2000-01-01

X-ray absorption, luminescence, and Raman spectroscopic studies of U(VI)-containing calcite and aragonite show that the UO 2 2+ ion, the dominant and mobile form of dissolved uranium in near-surface waters, has a disordered and apparently less stable coordination environment when incorporated into calcite in comparison to aragonite, both common polymorphs of CaCO 3 . Their findings suggest that calcite, a widely distributed authigenic mineral in soils and near-surface sediments and a principal weathering product of concrete-based containment structures, is not likely to be a suitable host for the long-term sequestration of U(VI). The more stable coordination provided by aragonite suggests that its long-term retention should be favored in this phase, until it inverts to calcite. Consequently, future remobilization of U(VI) coprecipitated with calcium carbonate minerals should not be ruled out in assessments of contaminated sites. Their observation of a similar equatorial coordination of UO 2 2+ in aragonite and the dominant aqueous species [UO 2 (CO 3 ) 3 4- ] but a different coordination in calcite indicates that a change in UO 2 2+ coordination is required for its incorporation into calcite. This may explain the observed preferential uptake of U(VI) by aragonite relative to calcite

Remediation of metal polluted mine soil with compost: Co-composting versus incorporation

International Nuclear Information System (INIS)

Tandy, Susan; Healey, John R.; Nason, Mark A.; Williamson, Julie C.; Jones, Davey L.

2009-01-01

Trace element contamination of post-industrial sites represents a major environmental problem and sustainable management options for remediating them are required. This study compared two strategies for immobilizing trace elements (Cu, Pb, Zn, and As) in mine spoil: (1) co-composting contaminated soil with organic wastes and (2) conventional incorporation of mature compost into contaminated soil. Sequential chemical extraction of the soil was performed to determine temporal changes in trace element fractionation and bioavailability during composting and plant growth. We show that mine spoil can be co-composted successfully and this action causes significant shifts in metal availability. However, co-composting did not lead to significant differences in metal partitioning in soil or in plant metal uptake compared with simply mixing mine spoil with mature compost. Both treatments promoted plant growth and reduced metal accumulation in plants. We conclude that co-composting provides little additional benefit for remediating trace-element-polluted soil compared with incorporation of compost. - Co-composting did not provide enhanced stabilization of trace elements over the conventional addition of compost to contaminated land

Full incorporation of Strattice™ Reconstructive Tissue Matrix in a reinforced hiatal hernia repair: a case report

Directory of Open Access Journals (Sweden)

Freedman Bruce E

2012-08-01

Full Text Available Abstract Introduction A non-cross-linked porcine acellular dermal matrix was used to reinforce an esophageal hiatal hernia repair. A second surgery was required 11 months later to repair a slipped Nissen; this allowed for examination of the hiatal hernia repair and showed the graft to be well vascularized and fully incorporated. Case presentation A 71-year-old Caucasian woman presented with substernal burning and significant dysphagia. An upper gastrointestinal series revealed a type III complex paraesophageal hiatal hernia. She underwent laparoscopic surgery to repair a hiatal hernia that was reinforced with a xenograft (Strattice™ Reconstructive Tissue Matrix, LifeCell, Branchburg, NJ, USA along with a Nissen fundoplication. A second surgery was required to repair a slipped Nissen; this allowed for examination of the hiatal repair and graft incorporation 11 months after the initial surgery. Conclusion In this case, a porcine acellular dermal matrix was an effective tool to reinforce the crural hiatal hernia repair. The placement of the mesh and method of fixation are believed to be crucial to the success of the graft. It was found to be well vascularized 11 months after the original placement with no signs of erosion, stricture, or infection. Further studies and long-term follow-up are required to support the findings of this case report.

Waste management system requirements document

International Nuclear Information System (INIS)

1991-02-01

This volume defines the top level requirements for the Mined Geologic Disposal System (MGDS). It is designed to be used in conjunction with Volume 1 of the WMSR, General System Requirements. It provides a functional description expanding the requirements allocated to the MGDS in Volume 1 and elaborates on each requirement by providing associated performance criteria as appropriate. Volumes 1 and 4 of the WMSR provide a minimum set of requirements that must be satisfied by the final MGDS design. This document sets forth specific requirements that must be fulfilled. It is not the intent or purpose of this top level document to describe how each requirement is to be satisfied in the final MGDS design. Each subsequent level of the technical document hierarchy must provide further guidance and definition as to how each of these requirements is to be implemented in the design. It is expected that each subsequent level of requirements will be significantly more detailed. Section 2 of this volume provides a functional description of the MGDS. Each function is addressed in terms of requirements, and performance criteria. Section 3 provides a list of controlling documents. Each document cited in a requirement of Chapter 2 is included in this list and is incorporated into this document as a requirement on the final system. The WMSR addresses only federal requirements (i.e., laws, regulations and DOE orders). State and local requirements are not addressed. However, it will be specifically noted at the potentially affected WMSR requirements that there could be additional or more stringent regulations imposed by a state or local requirements or administering agency over the cited federal requirements

40 CFR 98.314 - Monitoring and QA/QC requirements.

Science.gov (United States)

2010-07-01

... requirements. (a) You must measure your consumption of calcined petroleum coke using plant instruments used for.... Alternatively, facilities can measure monthly carbon contents of the petroleum coke using ASTM D3176-89... Nitrogen in Laboratory Samples of Coal (incorporated by reference, see § 98.7). (d) For quality assurance...

Reduced incorporation of the influenza B virus BM2 protein in virus particles decreases infectivity

International Nuclear Information System (INIS)

Jackson, David; Zuercher, Thomas; Barclay, Wendy

2004-01-01

BM2 is the fourth integral membrane protein encoded by the influenza B virus genome. It is synthesized late in infection and transported to the plasma membrane from where it is subsequently incorporated into progeny virus particles. It has recently been reported that BM2 has ion channel activity and may be the functional homologue of the influenza A virus M2 protein acting as an ion channel involved in viral entry. Using a reverse genetic approach it was not possible to recover virus which lacked BM2. A recombinant influenza B virus was generated in which the BM2 AUG initiation codon was mutated to GUG. This decreased the efficiency of translation of BM2 protein such that progeny virions contained only 1/8 the amount of BM2 seen in wild-type virus. The reduction in BM2 incorporation resulted in a reduction in infectivity although there was no concomitant decrease in the numbers of virions released from the infected cells. These data imply that the incorporation of sufficient BM2 protein into influenza B virions is required for infectivity of the virus particles

Safety Design Requirements for The Interior Architecture of Scientific Research Laboratories

International Nuclear Information System (INIS)

ElDib, A.A.

2014-01-01

The paper discusses one of the primary objectives of interior architecture design of research laboratories (specially those using radioactive materials) where it should provide a safe, accessible environment for laboratory personnel to conduct their work. A secondary objective is to allow for maximum flexibility for safe research. Therefore, health and safety hazards must be anticipated and carefully evaluated so that protective measures can be incorporated into the interior architectural design of these facilities wherever possible. The interior architecture requirements discussed in this paper illustrate some of the basic health and safety design features required for new and remodeled laboratories.The paper discusses one of the primary objectives of interior architecture design of research laboratories (specially those using radioactive materials) where it should provide a safe, accessible environment for laboratory personnel to conduct their work. A secondary objective is to allow for maximum flexibility for safe research. Therefore, health and safety hazards must be anticipated and carefully evaluated so that protective measures can be incorporated into the interior architectural design of these facilities wherever possible. The interior architecture requirements discussed in this paper illustrate some of the basic health and safety design features required for new and remodeled laboratories.

76 FR 22648 - Resolution Plans and Credit Exposure Reports Required

Science.gov (United States)

2011-04-22

..., information regarding the Covered Company's overall organizational structure and related information... thinking detailing how, in practice, it could be resolved under the Bankruptcy Code. As a result, the... plans. Organizational structure information required in Section 252.4 may be incorporated by reference...

Incorporating land-use requirements and environmental constraints in low-carbon electricity planning for California.

Science.gov (United States)

Wu, Grace C; Torn, Margaret S; Williams, James H

2015-02-17

The land-use implications of deep decarbonization of the electricity sector (e.g., 80% below 1990 emissions) have not been well-characterized quantitatively or spatially. We assessed the operational-phase land-use requirements of different low-carbon scenarios for California in 2050 and found that most scenarios have comparable direct land footprints. While the per MWh footprint of renewable energy (RE) generation is initially higher, that of fossil and nuclear generation increases over time with continued fuel use. We built a spatially explicit model to understand the interactions between resource quality and environmental constraints in a high RE scenario (>70% of total generation). We found that there is sufficient land within California to meet the solar and geothermal targets, but areas with the highest quality wind and solar resources also tend to be those with high conservation value. Development of some land with lower conservation value results in lower average capacity factors, but also provides opportunity for colocation of different generation technologies, which could significantly improve land-use efficiency and reduce permitting, leasing, and transmission infrastructure costs. Basing siting decisions on environmentally-constrained long-term RE build-out requirements produces significantly different results, including better conservation outcomes, than implied by the current piecemeal approach to planning.

Framework for optimal power flow incorporating dynamic system security

International Nuclear Information System (INIS)

El-Kady, M.A.; Owayedh, M.S.

2006-01-01

This paper introduces a novel framework and methodologies which are capable of tackling the complex issue of power system economy versus security in a practical and effective manner. At heart of achieving such a challenging and far-reaching objective is the incorporation of the Dyanamic Security Assessment (DSA) into production optimization techniques using the Transient Energy Function (TEF) method. In addition, and in parallel with the already well established concept of the system security, two new concepts pertaining to power system performance will be introduced in this paper, namely the concept of system dynamic susceptibility, which measures the level of systems weakness to a particular contingency and the concept of system consequent restorability, which measures the extent of contingency severity in terms of the required subsequent system restoration work should a particular contingency occur. (author)

Activity incorporation into zinc doped PWR oxides

International Nuclear Information System (INIS)

Maekelae, Kari

1998-01-01

Activity incorporation into the oxide layers of PWR primary circuit constructional materials has been studied in Halden since 1993. The first zinc injection tests showed that zinc addition resulted in thinner oxide layers on new metal surfaces and reduced further incorporation of activity into already existing oxides. These tests were continued to find out the effects of previous zinc additions on the pickup of activity onto the surface oxides which were subsequently exposed to zinc-free coolant. The results showed that previous zinc addition will continue to reduce the rate of Co-60 build-up on out-of-core surfaces in subsequent exposure to zinc-free coolants. However, the previous Zn free test was performed for a relatively short period of time and the water chemistry programme was continued to find out the long term effects for extended periods without zinc. The activity incorporation into the stainless steel oxides started to increase as soon as zinc dosing to the coolant was stopped. The Co-60 concentration was lowest on all of the coupons which were first oxidised in Zn containing primary coolant. After the zinc injection period the thickness of the oxides increased, but activity in the oxide films did not increase at the same rate. This could indicate that zinc in the oxide blocks the adsorption sites for Co-60 incorporation. The Co-60 incorporation rate into the oxides on Inconel 600 seemed to be linear whether the oxide was pre-oxidised with or without Zn. The results indicate that zinc can either replace or prevent cobalt transport in the oxides. The results show that for zinc injection to be effective it should be carried out continuously. Furthermore the actual mechanism by which Zn inhibits the activity incorporation into the oxides is still not clear. Therefore, additional work has to follow with specified materials to verify the conclusions drawn in this work. (author)

Radiological accidents: methodologies of radio nuclides dis incorporation

International Nuclear Information System (INIS)

Jimenez F, E. A.; Paredes G, L.; Cortes, A.

2014-08-01

Derived of the radioactive or nuclear material management, exists the risk that accidents can happen where people cases are presented with internal radioactive contamination, who will receive specialized medical care to accelerate the radioactive dis incorporation with the purpose of diminishing the absorbed dose and the associate biological effects. In this work treatments of radioactive dis incorporation were identified, in function of the radionuclide, radiation type, radioactive half life, biological half life, critical organ, ingestion duct and patient type. The factor time is decisive for the effectiveness of the selected treatment in the blockade stage (before the accident) or dis incorporation (after the accident); this factor is related with the radioactive and biological half lives. So to achieve dis incorporation efficiencies of more to 70%, the patient clinical treatment will begin before the first third of the biological half life of the radionuclide that generated the internal contamination. (Author)

Quantum-Mechanical Methods for Quantifying Incorporation of Contaminants in Proximal Minerals

Directory of Open Access Journals (Sweden)

Lindsay C. Shuller-Nickles

2014-07-01

Full Text Available Incorporation reactions play an important role in dictating immobilization and release pathways for chemical species in low-temperature geologic environments. Quantum-mechanical investigations of incorporation seek to characterize the stability and geometry of incorporated structures, as well as the thermodynamics and kinetics of the reactions themselves. For a thermodynamic treatment of incorporation reactions, a source of the incorporated ion and a sink for the released ion is necessary. These sources/sinks in a real geochemical system can be solids, but more commonly, they are charged aqueous species. In this contribution, we review the current methods for ab initio calculations of incorporation reactions, many of which do not consider incorporation from aqueous species. We detail a recently-developed approach for the calculation of incorporation reactions and expand on the part that is modeling the interaction of periodic solids with aqueous source and sink phases and present new research using this approach. To model these interactions, a systematic series of calculations must be done to transform periodic solid source and sink phases to aqueous-phase clusters. Examples of this process are provided for three case studies: (1 neptunyl incorporation into studtite and boltwoodite: for the layered boltwoodite, the incorporation energies are smaller (more favorable for reactions using environmentally relevant source and sink phases (i.e., ΔErxn(oxides > ΔErxn(silicates > ΔErxn(aqueous. Estimates of the solid-solution behavior of Np5+/P5+- and U6+/Si4+-boltwoodite and Np5+/Ca2+- and U6+/K+-boltwoodite solid solutions are used to predict the limit of Np-incorporation into boltwoodite (172 and 768 ppm at 300 °C, respectively; (2 uranyl and neptunyl incorporation into carbonates and sulfates: for both carbonates and sulfates, it was found that actinyl incorporation into a defect site is more favorable than incorporation into defect-free periodic

Phosphate incorporation in organic compounds in roots of maize

Energy Technology Data Exchange (ETDEWEB)

Michalik, I; Ivanko, S [Vysoka Skola Polnohospodarska, Nitra (Czechoslovakia)

1976-01-01

/sup 32/P incorporation and metabolism was investigated for short exposure times of 1 sec, 10 sec and 1, 10, 30 and 120 min. By stepwise extraction with a methanol-chloroform-formic acid-water mixture, various fractions of P compounds were obtained. Low-molecular acid-soluble P compounds were separated by one-dimensional paper chromatography. Of the total amount of /sup 32/P absorbed by the roots of maize in the form of phosphate ions during the short incubation time of 1 sec, more than 33% was incorporated into organic compounds. With increasing incubation time, the proportion of /sup 32/P in low-molecular organic compounds increased with the decreasing proportion of inorganic phosphorus. In the 1 sec, exposure incorporation was found in 3 low-molecular organic compounds only, namely ATP, ADP and diphosphoglyceric acid. The /sup 32/P incorporation into ATP and ADP, in contrast with incorporation into diphosphoglyceric acid, increased markedly with increased exposure time.

Phosphate incorporation in organic compounds in roots of maize

International Nuclear Information System (INIS)

Michalik, I.; Ivanko, S.

1976-01-01

32 P incorporation and metabolism was investigated for short exposure times of 1 sec, 10 sec and 1, 10, 30 and 120 min. By stepwise extraction with a methanol-chloroform-formic acid-water mixture, various fractions of P compounds were obtained. Low-molecular acid-soluble P compounds were separated by one-dimensional paper chromatography. Of the total amount of 32 P absorbed by the roots of maize in the form of phosphate ions during the short incubation time of 1 sec, more than 33% was incorporated into organic compounds. With increasing incubation time, the proportion of 32 P in low-molecular organic compounds increased with the decreasing proportion of inorganic phosphorus. In the 1 sec, exposure incorporation was found in 3 low-molecular organic compounds only, namely ATP, ADP and diphosphoglyceric acid. The 32 P incorporation into ATP and ADP, in contrast with incorporation into diphosphoglyceric acid, increased markedly with increased exposure time. (author)

36 CFR 13.320 - Preference to Cook Inlet Region, Incorporated.

Science.gov (United States)

2010-07-01

... Region, Incorporated. 13.320 Section 13.320 Parks, Forests, and Public Property NATIONAL PARK SERVICE... to Cook Inlet Region, Incorporated. (a) The Cook Inlet Region, Incorporated (CIRI), in cooperation with village corporations within the Cook Inlet region when appropriate, will have a right of first...

Clarification of TMI action plan requirements. Requirements for emergency response capability

International Nuclear Information System (INIS)

1983-01-01

This document, Supplement 1 to NUREG-0737, is a letter from D. G. Eisenhut, Director of the Division of Licensing, NRR, to licensees of operating power reactors, applicants for operating licenses, and holders of construction permits forwarding post-TMI requirements for emergency response capability which have been approved for implementation. On October 30, 1980, the NRC staff issued NUREG-0737, which incorporated into one document all TMI-related items approved for implementation by the Commission at that time. In this NRC report, additional clarification is provided regarding Safety Parameter Display Systems, Detailed Control Room Design Reviews, Regulatory Guide 1.97 (Revision 2) - Application to Emergency Response Facilities, Upgrade of Emergency Operating Procedures, Emergency Response Facilities, and Meteorological Data

40 CFR 174.525 - E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false E. coli B-D-glucuronidase enzyme as a... E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption from the requirement of a tolerance. Residues of E. coli B-D-glucuronidase enzyme are exempt from the...

Dopant Adsorption and Incorporation at Irradiated GaN Surfaces

Science.gov (United States)

Sun, Qiang; Selloni, Annabella; Myers, Thomas; Doolittle, W. Alan

2006-03-01

Mg and O are two of the common dopants in GaN, but, in spite of extensive investigation, the atomic scale understanding of their adsorption and incorporation is still incomplete. In particular, high-energy electron irradiation, such as occurring during RHEED, has been reported to have an important effect on the incorporation of these impurities, but no study has addressed the detailed mechanisms of this effect yet. Here we use DFT calculations to study the adsorption and incorporation of Mg and O at the Ga- and N-polar GaN surfaces under various Ga, Mg and O coverage conditions as well as in presence of light or electron beam-induced electronic excitation. We find that the adsorption and incorporation of the two impurities have opposite surface polarity dependence: substitutional Mg prefers to incorporate at the GaN(0001) surface, while O prefers to adsorb and incorporate at the N-polar surface. In addition, our results indicate that in presence of light irradiation the tendency of Mg to surface-segregate is reduced. The O adsorption energy on the N-polar surface is also significantly reduced, consistent with the experimental observation of a much smaller concentration of oxygen in the irradiated samples.

Incorporating Duration Information in Activity Recognition

Science.gov (United States)

Chaurasia, Priyanka; Scotney, Bryan; McClean, Sally; Zhang, Shuai; Nugent, Chris

Activity recognition has become a key issue in smart home environments. The problem involves learning high level activities from low level sensor data. Activity recognition can depend on several variables; one such variable is duration of engagement with sensorised items or duration of intervals between sensor activations that can provide useful information about personal behaviour. In this paper a probabilistic learning algorithm is proposed that incorporates episode, time and duration information to determine inhabitant identity and the activity being undertaken from low level sensor data. Our results verify that incorporating duration information consistently improves the accuracy.

Blasting detonators incorporating semiconductor bridge technology

Energy Technology Data Exchange (ETDEWEB)

Bickes, R.W. Jr.

1994-05-01

The enormity of the coal mine and extraction industries in Russia and the obvious need in both Russia and the US for cost savings and enhanced safety in those industries suggests that joint studies and research would be of mutual benefit. The author suggests that mine sites and well platforms in Russia offer an excellent opportunity for the testing of Sandia`s precise time-delay semiconductor bridge detonators, with the potential for commercialization of the detonators for Russian and other world markets by both US and Russian companies. Sandia`s semiconductor bridge is generating interest among the blasting, mining and perforation industries. The semiconductor bridge is approximately 100 microns long, 380 microns wide and 2 microns thick. The input energy required for semiconductor bridge ignition is one-tenth the energy required for conventional bridgewire devices. Because semiconductor bridge processing is compatible with other microcircuit processing, timing and logic circuits can be incorporated onto the chip with the bridge. These circuits can provide for the precise timing demanded for cast effecting blasting. Indeed tests by Martin Marietta and computer studies by Sandia have shown that such precise timing provides for more uniform rock fragmentation, less fly rock, reduce4d ground shock, fewer ground contaminants and less dust. Cost studies have revealed that the use of precisely timed semiconductor bridges can provide a savings of $200,000 per site per year. In addition to Russia`s vast mineral resources, the Russian Mining Institute outside Moscow has had significant programs in rock fragmentation for many years. He anticipated that collaborative studies by the Institute and Sandia`s modellers would be a valuable resource for field studies.

Context incorporation using context-aware language features

OpenAIRE

Vlachostergiou, Aggeliki; Marandianos, George; Kollias, Stefanos

2017-01-01

This paper investigates the problem of context incorporation into human language systems and particular in Sentiment Analysis (SA) systems. So far, the analysis of how different features, when incorporated into such systems, improve their performance, has been discussed in a number of studies. However, a complete picture of their effectiveness remains unexplored. With this work, we attempt to extend the pool of the context - aware language features at the sentence level and to provide the ...

Spike protein assembly into the coronavirion: exploring the limits of its sequence requirements

International Nuclear Information System (INIS)

Bosch, Berend Jan; Haan, Cornelis A.M. de; Smits, Saskia L.; Rottier, Peter J.M.

2005-01-01

The coronavirus spike (S) protein, required for receptor binding and membrane fusion, is incorporated into the assembling virion by interactions with the viral membrane (M) protein. Earlier we showed that the ectodomain of the S protein is not involved in this process. Here we further defined the requirements of the S protein for virion incorporation. We show that the cytoplasmic domain, not the transmembrane domain, determines the association with the M protein and suffices to effect the incorporation into viral particles of chimeric spikes as well as of foreign viral glycoproteins. The essential sequence was mapped to the membrane-proximal region of the cytoplasmic domain, which is also known to be of critical importance for the fusion function of the S protein. Consistently, only short C-terminal truncations of the S protein were tolerated when introduced into the virus by targeted recombination. The important role of the about 38-residues cytoplasmic domain in the assembly of and membrane fusion by this approximately 1300 amino acids long protein is discussed

Cross sections required for FMIT dosimetry

International Nuclear Information System (INIS)

Gold, R.; McElroy, W.N.; Lippincott, E.P.; Mann, F.M.; Oberg, D.L.; Roberts, J.H.; Ruddy, F.H.

1980-01-01

The Fusion Materials Irradiation Test (FMIT) facility, currently under construction, is designed to produce a high flux of high energy neutrons for irradiation effects experiments on fusion reactor materials. Characterization of the flux-fluence-spectrum in this rapidly varying neutron field requires adaptation and extension of currently available dosimetry techniques. This characterization will be carried out by a combination of active, passive, and calculational dosimetry. The goal is to provide the experimenter with accurate neutron flux-fluence-spectra at all positions in the test cell. Plans have been completed for a number of experimental dosimetry stations and provision for these facilities has been incorporated into the FMIT design. Overall needs of the FMIT irradiation damage program delineate goal accuracies for dosimetry that, in turn, create new requirements for high energy neutron cross section data. Recommendations based on these needs have been derived for required cross section data and accuracies

Incorporation of Uranium into Hematite during Crystallization from Ferrihydrite

Science.gov (United States)

2014-01-01

Ferrihydrite was exposed to U(VI)-containing cement leachate (pH 10.5) and aged to induce crystallization of hematite. A combination of chemical extractions, TEM, and XAS techniques provided the first evidence that adsorbed U(VI) (≈3000 ppm) was incorporated into hematite during ferrihydrite aggregation and the early stages of crystallization, with continued uptake occurring during hematite ripening. Analysis of EXAFS and XANES data indicated that the U(VI) was incorporated into a distorted, octahedrally coordinated site replacing Fe(III). Fitting of the EXAFS showed the uranyl bonds lengthened from 1.81 to 1.87 Å, in contrast to previous studies that have suggested that the uranyl bond is lost altogether upon incorporation into hematite. The results of this study both provide a new mechanistic understanding of uranium incorporation into hematite and define the nature of the bonding environment of uranium within the mineral structure. Immobilization of U(VI) by incorporation into hematite has clear and important implications for limiting uranium migration in natural and engineered environments. PMID:24580024

40 CFR 89.309 - Analyzers required for gaseous emissions.

Science.gov (United States)

2010-07-01

...). (ii) The quench interference must be less than 3.0 percent as measured in § 89.318. (b) Other gas... following requirements must be incorporated in each system used for testing under this subpart. (1) Carbon... span gases for the NOX measurement system must pass through the NO2 to NO converter. (d) The...

Tuning hardness in calcite by incorporation of amino acids.

Science.gov (United States)

Kim, Yi-Yeoun; Carloni, Joseph D; Demarchi, Beatrice; Sparks, David; Reid, David G; Kunitake, Miki E; Tang, Chiu C; Duer, Melinda J; Freeman, Colin L; Pokroy, Boaz; Penkman, Kirsty; Harding, John H; Estroff, Lara A; Baker, Shefford P; Meldrum, Fiona C

2016-08-01

Structural biominerals are inorganic/organic composites that exhibit remarkable mechanical properties. However, the structure-property relationships of even the simplest building unit-mineral single crystals containing embedded macromolecules-remain poorly understood. Here, by means of a model biomineral made from calcite single crystals containing glycine (0-7 mol%) or aspartic acid (0-4 mol%), we elucidate the origin of the superior hardness of biogenic calcite. We analysed lattice distortions in these model crystals by using X-ray diffraction and molecular dynamics simulations, and by means of solid-state nuclear magnetic resonance show that the amino acids are incorporated as individual molecules. We also demonstrate that nanoindentation hardness increased with amino acid content, reaching values equivalent to their biogenic counterparts. A dislocation pinning model reveals that the enhanced hardness is determined by the force required to cut covalent bonds in the molecules.

Relationship between the rate of hepatic sterol synthesis and the incorporation of [3H]water

International Nuclear Information System (INIS)

Pullinger, C.R.; Gibbons, G.F.

1983-01-01

The true rate of sterol synthesis in liver cells was determined by measurement of the weight of desmosterol produced over a given time period during incubations in the presence of triparanol. The simultaneous presence of tritiated water ( 3 H 2 O) during the incubations permitted a direct observation of the weight of tritium incorporated into a given mass of newly synthesized sterol. The incorporation of tritium per atom of sterol carbon (H/C ratio) was lower than some previously reported values and suggests that a sizeable proportion of the reducing equivalents (NADPH) required for sterol synthesis arises via the pentose phosphate pathway. The H/C ratio changed significantly with length of the incubation period. The value of the ratio was also dependent upon whether the acetyl-CoA units utilized for sterol synthesis were derived predominantly from a carbohydrate or a fatty acid source

Incorporating Twitter, Instagram, and Facebook in Economics Classrooms

Science.gov (United States)

Al-Bahrani, Abdullah; Patel, Darshak

2015-01-01

Social media is one of the most current and dynamic developments in education. In general, the field of economics has lagged behind other disciplines in incorporating technologies in the classroom. In this article, the authors provide a guide for economics educators on how to incorporate Twitter, Instagram, and Facebook inside and outside of the…

Policy and Policy Formulation Considerations for Incorporation of Secure Mobile Devices in USMC Ground Combat Units

Science.gov (United States)

2014-09-01

Defense Information Systems Network Flag Panel, and its GIG waiver request within 14 days or be subject to censorship and punitive action (Office...can disproportionately affect the outcome of an engagement. Balancing the requirements of GIG security while also incorporating technologies which...classified the paradigm of the industrial age as the division of labor and economies of scale in his 1776 The Wealth of Nations, and it was on these

Incorporating Standardized Colleague Simulations in a Clinical Assessment Course and Evaluating the Impact on Interprofessional Communication.

Science.gov (United States)

Shrader, Sarah; Dunn, Brianne; Blake, Elizabeth; Phillips, Cynthia

2015-05-25

To determine the impact of incorporating standardized colleague simulations on pharmacy students' confidence and interprofessional communication skills. Four simulations using standardized colleagues portraying attending physicians in inpatient and outpatient settings were integrated into a required course. Pharmacy students interacted with the standardized colleagues using the Situation, Background, Assessment, Request/Recommendation (SBAR) communication technique and were evaluated on providing recommendations while on simulated inpatient rounds and in an outpatient clinic. Additionally, changes in student attitudes and confidence toward interprofessional communication were assessed with a survey before and after the standardized colleague simulations. One hundred seventy-one pharmacy students participated in the simulations. Student interprofessional communication skills improved after each simulation. Student confidence with interprofessional communication in both inpatient and outpatient settings significantly improved. Incorporation of simulations using standardized colleagues improves interprofessional communication skills and self-confidence of pharmacy students.

Incorporating travel time reliability into the Highway Capacity Manual.

Science.gov (United States)

2014-01-01

This final report documents the activities performed during SHRP 2 Reliability Project L08: Incorporating Travel Time Reliability into the Highway Capacity Manual. It serves as a supplement to the proposed chapters for incorporating travel time relia...

American Society of Mechanical Engineers' N stamp requirements

International Nuclear Information System (INIS)

Row, P.D.

1977-01-01

Incorporated with ASME Section III, Nuclear Power Plant Components, is an Appendix on Quality Assurance Systems which includes provision for ASME surveys. Manufacturers and installers passing the survey successfully receive an N Symbol Stamp and an ASME Certificate of Authorization. An outline is given of the prerequisites for a survey to be scheduled and of the requirements and procedures adopted by the survey team. (U.K.)

Synthesis and in vitro evaluation of novel isatin- incorporated ...

African Journals Online (AJOL)

incorporated thiadiazole hybrids as potential anti-breast ... Abstract. Purpose: To synthesis and characterize some novel isatin-incorporated ... Results: Compounds 3a, 3c, 3d, 3g and 3j showed anticancer activity in both MTT and SRB assay.

Np Incorporation into Uranyl Alteration Phases: A Quantum Mechanical Approach

International Nuclear Information System (INIS)

L.C. Huller; R.C. Win; U.Ecker

2006-01-01

Neptunium is a major contributor to the long-term radioactivity in a geologic repository for spent nuclear fuel (SNF) due to its long half-life (2.1 million years). The mobility of Np may be decreased by incorporation into the U 6+ phases that form during the corrosion of SNF. The ionic radii of Np (0.089nm) and U (0.087nm) are similar, as is their chemistry. Experimental studies have shown Np can be incorporated into uranyl phases at concentrations of ∼ 100 ppm. The low concentration of Np in the uranyl phases complicates experimental detection and presents a significant challenge for determining the incorporation mechanism. Therefore, we have used quantum mechanical calculations to investigate incorporation mechanisms and evaluate the energetics of Np substituting for U. CASTEP, a density functional theory based code that uses plane waves and pseudo-potentials, was used to calculate optimal H positions, relaxed geometry, and energy of different uranyl phases. The incorporation energy for Np in uranyl alteration phases was calculated for studtite, [(UO 2 )O 2 (H 2 O) 2 ](H 2 ) 2 , and boltwoodite, HK(UO 2 )(SiO 4 )* 1.5(H 2 O). Studtite is the rare case of a stable uranyl hydroxyl-peroxide mineral that forms in the presence of H 2 O 2 from the radiolysis of H 2 O. For studtite, two incorporation mechanisms were evaluated: (1) charge-balanced substitution of Np 5+ and H + for one U 6+ , and (2) direct substitution of Np 6+ for U 6+ . For boltwoodite, the H atomic positions prior to Np incorporation were determined, as well as the Np incorporation mechanisms and the corresponding substitution energies. The preferential incorporation of Np into different structure types of U 6+ minerals was also investigated. Quantum mechanical substitution energies have to be derived at Np concentrations higher than the ones found in experiments or expected in a repository. However, the quantum mechanical results are crucial for subsequent empirical force-field and Monte

Engineering the bone-ligament interface using polyethylene glycol diacrylate incorporated with hydroxyapatite.

Science.gov (United States)

Paxton, Jennifer Z; Donnelly, Kenneth; Keatch, Robert P; Baar, Keith

2009-06-01

Ligaments and tendons have previously been tissue engineered. However, without the bone attachment, implantation of a tissue-engineered ligament would require it to be sutured to the remnant of the injured native tissue. Due to slow repair and remodeling, this would result in a chronically weak tissue that may never return to preinjury function. In contrast, orthopaedic autograft reconstruction of the ligament often uses a bone-to-bone technique for optimal repair. Since bone-to-bone repairs heal better than other methods, implantation of an artificial ligament should also occur from bone-to-bone. The aim of this study was to investigate the use of a poly(ethylene glycol) diacrylate (PEGDA) hydrogel incorporated with hydroxyapatite (HA) and the cell-adhesion peptide RGD (Arg-Gly-Asp) as a material for creating an in vitro tissue interface to engineer intact ligaments (i.e., bone-ligament-bone). Incorporation of HA into PEG hydrogels reduced the swelling ratio but increased mechanical strength and stiffness of the hydrogels. Further, HA addition increased the capacity for cell growth and interface formation. RGD incorporation increased the swelling ratio but decreased mechanical strength and stiffness of the material. Optimum levels of cell attachment were met using a combination of both HA and RGD, but this material had no better mechanical properties than PEG alone. Although adherence of the hydrogels containing HA was achieved, failure occurs at about 4 days with 5% HA. Increasing the proportion of HA improved interface formation; however, with high levels of HA, the PEG HA composite became brittle. This data suggests that HA, by itself or with other materials, might be well suited for engineering the ligament-bone interface.

Incorporating parametric uncertainty into population viability analysis models

Science.gov (United States)

McGowan, Conor P.; Runge, Michael C.; Larson, Michael A.

2011-01-01

Uncertainty in parameter estimates from sampling variation or expert judgment can introduce substantial uncertainty into ecological predictions based on those estimates. However, in standard population viability analyses, one of the most widely used tools for managing plant, fish and wildlife populations, parametric uncertainty is often ignored in or discarded from model projections. We present a method for explicitly incorporating this source of uncertainty into population models to fully account for risk in management and decision contexts. Our method involves a two-step simulation process where parametric uncertainty is incorporated into the replication loop of the model and temporal variance is incorporated into the loop for time steps in the model. Using the piping plover, a federally threatened shorebird in the USA and Canada, as an example, we compare abundance projections and extinction probabilities from simulations that exclude and include parametric uncertainty. Although final abundance was very low for all sets of simulations, estimated extinction risk was much greater for the simulation that incorporated parametric uncertainty in the replication loop. Decisions about species conservation (e.g., listing, delisting, and jeopardy) might differ greatly depending on the treatment of parametric uncertainty in population models.

The need to incorporate health information technology into physicians' education and professional development.

Science.gov (United States)

Graham-Jones, Pierce; Jain, Sachin H; Friedman, Charles P; Marcotte, Leah; Blumenthal, David

2012-03-01

Nationwide, as physicians and health care systems adopt electronic health records, health information technology is becoming integral to the practice of medicine. But current medical education and professional development curricula do not systematically prepare physicians to use electronic health records and the data these systems collect. We detail how training in meaningful use of electronic health records could be incorporated into physician training, from medical school, through licensure and board certification, to continuing medical education and the maintenance of licensure and board certification. We identify six near-term opportunities for professional organizations to accelerate the integration of health information technology into their requirements.

Incorporation of unique molecular identifiers in TruSeq adapters improves the accuracy of quantitative sequencing.

Science.gov (United States)

Hong, Jungeui; Gresham, David

2017-11-01

Quantitative analysis of next-generation sequencing (NGS) data requires discriminating duplicate reads generated by PCR from identical molecules that are of unique origin. Typically, PCR duplicates are identified as sequence reads that align to the same genomic coordinates using reference-based alignment. However, identical molecules can be independently generated during library preparation. Misidentification of these molecules as PCR duplicates can introduce unforeseen biases during analyses. Here, we developed a cost-effective sequencing adapter design by modifying Illumina TruSeq adapters to incorporate a unique molecular identifier (UMI) while maintaining the capacity to undertake multiplexed, single-index sequencing. Incorporation of UMIs into TruSeq adapters (TrUMIseq adapters) enables identification of bona fide PCR duplicates as identically mapped reads with identical UMIs. Using TrUMIseq adapters, we show that accurate removal of PCR duplicates results in improved accuracy of both allele frequency (AF) estimation in heterogeneous populations using DNA sequencing and gene expression quantification using RNA-Seq.

Therapy for incorporated radionuclides: scope and need

International Nuclear Information System (INIS)

Smith, V.H.

1981-03-01

In the United States the recent termination of funding for research on therapy for incorporated radionuclides has virtually halted progress on improved or new agents and procedures for removing radioactivity from the body. Research was eliminated, but is still needed on new removal agents, improved delivery system, in vitro test systems, and the toxicology of treatments. For many radionuclides, no adequate therapy exists. The relationship between radionuclide removal and reduction in cancer risk is still unanswered. Without proper research support, needed improvements in the treatment for incorporated radionuclides in the US are uncertain

EFFECT OF INCORPORATING EXPANDED POLYSTYRENE ...

African Journals Online (AJOL)

2012-11-03

Nov 3, 2012 ... Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of ... structure. [1] reported that the standard workability tests are not suitable for the polystyrene aggregate concrete since they are sensitive to the unit weight of concrete. [2] made ...

Salinity controls on Na incorporation in Red Sea planktonic foraminifera

Science.gov (United States)

Mezger, E. M.; de Nooijer, L. J.; Boer, W.; Brummer, G. J. A.; Reichart, G. J.

2016-12-01

Whereas several well-established proxies are available for reconstructing past temperatures, salinity remains challenging to assess. Reconstructions based on the combination of (in)organic temperature proxies and foraminiferal stable oxygen isotopes result in relatively large uncertainties, which may be reduced by application of a direct salinity proxy. Cultured benthic and planktonic foraminifera showed that Na incorporation in foraminiferal shell calcite provides a potential independent proxy for salinity. Here we present the first field calibration of such a potential proxy. Living planktonic foraminiferal specimens from the Red Sea surface waters were collected and analyzed for their Na/Ca content using laser ablation quadrupole inductively coupled plasma mass spectrometry. Using the Red Sea as a natural laboratory, the calibration covers a broad range of salinities over a steep gradient within the same water mass. For both Globigerinoides ruber and Globigerinoides sacculifer calcite Na/Ca increases with salinity, albeit with a relatively large intraspecimen and interspecimen variability. The field-based calibration is similar for both species from a salinity of 36.8 up to 39.6, while values for G. sacculifer deviate from this trend in the northernmost transect. It is hypothesized that the foraminifera in the northernmost part of the Red Sea are (partly) expatriated and hence should be excluded from the Na/Ca-salinity calibration. Incorporation of Na in foraminiferal calcite therefore provides a potential proxy for salinity, although species-specific calibrations are still required and more research on the effect of temperature is needed.

TMI-2 fuel canister interface requirements for INEL. Revision 1

International Nuclear Information System (INIS)

Wilkins, D.E.; Martz, D.E.; Reno, H.W.

1984-06-01

This report focuses on fuel canister interface requirements at INEL which should be incorporated into the canister design criteria. The requirements will ensure compatibility with existing INEL structures and equipment to be used for receipt, unloading, and storage of fuel canisters. INEL can and does receive and store radioactive materials in many different forms, including reactor fuel. INEL requires detailed descriptions of canisters and casks. Therefore, requirements listed represent engineering design features which will simplify the handling and storage operations; consequently, they are not to be viewed as absolute or non-negotiable. However, the core acquisition contract was negotiated with certain storage assumptions which effect costs of storage. Deviations from those assumptions which significantly effect costs would require approval by DOE-Idaho. If some stated requirements are too restrictive, modifications based on sound engineering principles may be negotiated with INEL. 11 figures

75 FR 17737 - Industrial Economics, Incorporated; Transfer of Data

Science.gov (United States)

2010-04-07

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2010-0194; FRL-8820-2] Industrial Economics... (CBI) by the submitter, will be transferred to Industrial Economics, Incorporated in accordance with 40 CFR 2.307(h)(3) and 2.308(i)(2). Industrial Economics, Incorporated has been awarded multiple...

Role of Glycol Chitosan-incorporated Ursolic Acid Nanoparticles in ...

African Journals Online (AJOL)

Purpose: To investigate the effect of ursolic acid (UA)-incorporated glycol chitosan (GC) nanoparticles on inhibition of human osteosarcoma. Methods: U2OS and Saos-2 osteosarcoma cells were transfected with ursolic acid (UA) incorporated glycol chitosan (GC) nanoparticles. Ultraviolet (UV) spectrophotometry was used ...

Inhibition of exogenous 3-deoxy-D-manno octulosonate incorporation into lipid A precursor of toluene-treated Salmonella typhimurium cells

International Nuclear Information System (INIS)

Capobianco, J.O.; Darveau, R.P.; Goldman, R.C.; Lartey, P.A.; Pernet, A.G.

1987-01-01

Analogs of 3-deoxy-D-manno-octulosonate (KDO) were designed to inhibit CTP:CMP-KDO cytidylyltransferase (CMP-KDO synthetase). Since these analogs lacked whole-cell antibacterial activity, a permeabilized-cell method was developed to measure intracellular compound activity directly. The method employed a mutant of Salmonella typhimurium defective in KDO-8-phosphate synthetase (kdsA), which accumulated lipid A precursor at 42 0 C. Cells permeabilized with 1% toluene were used to evaluate inhibitor effect on [ 3 H]KDO incorporation into preformed lipid A precursor. KDO incorporation proceeded through the enzymes CMP-DKO synthetase and CMP-KDO:lipid A KDO transferase. Optimum KDO incorporation occurred between pH 8 and 9 and required CTP, prior lipid A precursor accumulation, and a functional kdsB gene product, CMP-KDO synthetase. The apparent K/sub m/ for KDO in this coupled system at pH 7.6 was 1.38 mM. The reaction products isolated and characterized contained 1 and 2 KDO residues per lipid A precursor molecule. Several KDO analogs produced concentration-related reductions of DKO incorporation in toluenized cells with 50% inhibitor concentrations comparable to those obtained in purified CMP-DKO synthetase systems. Two compounds, 8-amino-2-deoxy-KDO (A-60478) and 8-aminomethyl-2-deoxy-KDO (A-60821), competitively inhibited KDO incorporation, displaying K/sub i/s of 4.2 + M for A=60478 and 2.5 + M for A-60821

Technology Requirements for a Square Meter, Arcsecond Resolution Telescope for X-Rays: The SMART-X Mission

Science.gov (United States)

Schwartz, Daniel A.; Allured, Ryan; Bookbinder, Jay A.; Cotroneo, Vincenzo; Forman, William R.; Freeman, Mark D.; McMuldroch, Stuart; Reid, Paul B.; Tananbaum, Harvey; Vikhlinin, Alexey A.;

Ba incorporation in benthic foraminifera

NARCIS (Netherlands)

de Nooijer, L.J.; Brombacher, Anieke; Mewes, A.; Langer, Gerald; Nehrke, G.; Bijma, Jelle; Reichart, G.J.

2017-01-01

Barium (Ba) incorporated in the calcite of many foraminiferal species is proportional to the concentration of Ba in seawater. Since the open ocean concentration of Ba closely follows seawater alkalinity, foraminiferal Ba ∕ Ca can be used to reconstruct the latter. Alternatively, Ba ∕ Ca from

Incorporating Open/Free GIS and GPS Software in Power Transmission Line Routine Work: The Case of Crete and Rhodes

Directory of Open Access Journals (Sweden)

D. Pylarinos

2017-02-01

Full Text Available Geographical Information System (GIS and Global Positioning System (GPS software are widely gaining attention in power system planning and operation. Although commercial systems are increasingly being incorporated in power systems applications, they are yet to be fully incorporated in the routine work of utilities (and especially in the work of crews, due to several reasons such as cost, portability, connectivity, performance/speed, infrastructure etc. This paper focuses on incorporating certain open/free GIS and GPS software in routine transmission line work. The case study is the 150kV transmission systems of the Greek islands of Crete and Rhodes which show increased complexity due to certain localized factors such as Greek legislation, the diverse terrain/routes, the segmented design due to the network’s growth over the years (regarding both voltage levels and routes and the use of different Coordinate Reference Systems (or Geodetic Systems from the Greek state. The main goals of this work was to incorporate open/free software that provided limitless online access points, offline navigation and a user friendly design that wouldn’t require any additional training, programming etc. The basic scheme described in this paper can be followed to provide similar results in other applications.

Analytical chemistry requirements for advanced reactors

International Nuclear Information System (INIS)

Jayashree, S.; Velmurugan, S.

2015-01-01

The nuclear power industry has been developing and improving reactor technology for more than five decades. Newer advanced reactors now being built have simpler designs which reduce capital cost. The greatest departure from most designs now in operation is that many incorporate passive or inherent safety features which require no active controls or operational intervention to avoid accidents in the event of malfunction, and may rely on gravity, natural convection or resistance to high temperatures. India is developing the Advanced Heavy Water Reactor (AHWR) in its plan to utilise thorium in nuclear power program

28 CFR 10.5 - Incorporation of papers previously filed.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Incorporation of papers previously filed... CARRYING ON ACTIVITIES WITHIN THE UNITED STATES Registration Statement § 10.5 Incorporation of papers previously filed. Papers and documents already filed with the Attorney General pursuant to the said act and...

Incorporating wind generation forecast uncertainty into power system operation, dispatch, and unit commitment procedures

Energy Technology Data Exchange (ETDEWEB)

Makarov, Yuri V.; Etingov, Pavel V.; Huang, Zhenyu; Ma, Jiam; Subbarao, Krishnappa [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

2010-07-01

An approach to evaluate the uncertainties of the balancing capacity, ramping capability, and ramp duration requirements is proposed. The approach includes three steps: forecast data acquisition, statistical analysis of retrospective information, and prediction of grid balancing requirements for a specified time horizon and a given confidence level. An assessment of the capacity and ramping requirements is performed using a specially developed probabilistic algorithm based on histogram analysis, incorporating sources of uncertainty - both continuous (wind and load forecast errors) and discrete (forced generator outages and start-up failures). A new method called the ''flying-brick'' technique is developed to evaluate the look-ahead required generation performance envelope for the worst case scenario within a user-specified confidence level. A self-validation process is used to validate the accuracy of the confidence intervals. To demonstrate the validity of the developed uncertainty assessment methods and its impact on grid operation, a framework for integrating the proposed methods with an EMS system is developed. Demonstration through integration with an EMS system illustrates the applicability of the proposed methodology and the developed tool for actual grid operation and paves the road for integration with EMS systems from other vendors. (orig.)

Improving Watershed-Scale Hydrodynamic Models by Incorporating Synthetic 3D River Bathymetry Network

Science.gov (United States)

Dey, S.; Saksena, S.; Merwade, V.

2017-12-01

Digital Elevation Models (DEMs) have an incomplete representation of river bathymetry, which is critical for simulating river hydrodynamics in flood modeling. Generally, DEMs are augmented with field collected bathymetry data, but such data are available only at individual reaches. Creating a hydrodynamic model covering an entire stream network in the basin requires bathymetry for all streams. This study extends a conceptual bathymetry model, River Channel Morphology Model (RCMM), to estimate the bathymetry for an entire stream network for application in hydrodynamic modeling using a DEM. It is implemented at two large watersheds with different relief and land use characterizations: coastal Guadalupe River basin in Texas with flat terrain and a relatively urban White River basin in Indiana with more relief. After bathymetry incorporation, both watersheds are modeled using HEC-RAS (1D hydraulic model) and Interconnected Pond and Channel Routing (ICPR), a 2-D integrated hydrologic and hydraulic model. A comparison of the streamflow estimated by ICPR at the outlet of the basins indicates that incorporating bathymetry influences streamflow estimates. The inundation maps show that bathymetry has a higher impact on flat terrains of Guadalupe River basin when compared to the White River basin.

Microsystem to evaluate the incorporation of 3H-uridine in macrophage RNA

International Nuclear Information System (INIS)

Varesio, L.; Naglich, J.; Brunda, M.J.; Taramelli, D.; Eva, A.

1981-01-01

A method is described for the evaluation of the total 3H-uridine incorporated by macrophages in vitro into trichloroacetic acid (TCA)-precipitable material. The technique is based upon solubilization of the macrophage monolayers by guanidine-HC1, followed by TCA precipitation. The recovery of RNA into the precipitate and the reproducibility of the results were strictly dependent on the use of filtered reagents and on incubation of the TCA precipitate for 2 or more hours at 4 degree C before harvesting. Treatment with quanidine-HC1 did not affect the recovery of labeled RNA. Moreover, we observed that radioactive precipitate had the characteristics of RNA, since its recovery was sensitive to the addition of unlabeled uridine in the culture medium and to the treatment of the macrophages with inhibitors of RNA synthesis, but not of protein synthesis. Tritiated uridine incorporation in microcultures of macrophages can be assessed with this technique, by processing the cells directly in the wells. The main advantages of this procedure are: 1) the radioactivity can be measured by semiautomatic cell harvesters, 2) a small number of macrophages are required, and 3) many samples can be processed simultaneously. Overall, the technique is simple, rapid, and could be successfully adapted to study other metabolic pathways

Performance characterizations of asphalt binders and mixtures incorporating silane additive ZycoTherm

Science.gov (United States)

Hasan, Mohd Rosli Mohd; Hamzah, Meor Othman; Yee, Teh Sek

2017-10-01

Experimental works were conducted to evaluate the properties of asphalt binders and mixtures produced using a relatively new silane additive, named ZycoTherm. In this study, 0.1wt% ZycoTherm was blended with asphalt binder to enable production of asphalt mixture at lower than normal temperatures, as well as improve mix workability and compactability. Asphalt mixture performances towards pavement distresses in tropical climate region were also investigated. The properties of control asphalt binders (60/70 and 80/10 penetration grade) and asphalt binders incorporating 0.1% ZycoTherm were reported based on the penetration, softening point, rotational viscosity, complex modulus and phase angle. Subsequently, to compare the performance of asphalt mixture incorporating ZycoTherm with the control asphalt mixture, cylindrical samples were prepared at recommended temperatures and air voids depending on the binder types and test requirements. The samples were tested for indirect tensile strength (ITS), resilient modulus, dynamic creep, Hamburg wheel tracking and moisture induced damage. From compaction data using the Servopak gyratory compactor, specimen prepared using ZycoTherm exhibit higher workability and compactability compared to the conventional mixture. From the mixture performance test results, mixtures prepared with ZycoTherm showed comparable if not better performance than the control sample in terms of the resistance to moisture damage, permanent deformation and cracking.

Radionuclides incorporation in activated natural nanotubes

International Nuclear Information System (INIS)

Silva, Jose Parra

2016-01-01

Natural palygorskite nanotubes show suitable physical and chemical properties and characteristics to be use as potential nanosorbent and immobilization matrix for the concentration and solidification of radionuclides present in nuclear wastes. In the development process of materials with sorption properties for the incorporation and subsequent immobilization of radionuclides, the most important steps are related with the generation of active sites simultaneously to the increase of the specific surface area and suitable heat treatment to producing the structural folding. This study evaluated the determining parameters and conditions for the activation process of the natural palygorskite nanotubes aiming at the sorption of radionuclides in the nanotubes structure and subsequent evaluation of the parameters involve in the structural folding by heat treatments. The optimized results about the maximum sorption capacity of nickel in activated natural nanotubes show that these structures are apt and suitable for incorporation of radionuclides similar to nickel. By this study is verified that the optimization of the acid activation process is fundamental to improve the sorption capacities for specifics radionuclides by activated natural nanotubes. Acid activation condition optimized maintaining structural integrity was able to remove around 33.3 wt.% of magnesium cations, equivalent to 6.30·10 -4 g·mol -1 , increasing in 42.8% the specific surface area and incorporating the same molar concentration of nickel present in the liquid radioactive waste at 80 min. (author)

78 FR 62930 - Order Providing Broker-Dealers a Temporary Exemption From the Requirements of Certain New...

Science.gov (United States)

2013-10-22

... accurately document their market, credit, and liquidity risk management controls under new paragraph (a)(23...)(2) to Rule 15c3-3 regarding the treatment of customers' free credit balances. Additionally, broker... incorporates certain requirements from Rule 15c3-2 (customers' free credit balances), including the requirement...

78 FR 51078 - Reporting Requirements for Positive Train Control Expenses and Investments

Science.gov (United States)

2013-08-20

...] Reporting Requirements for Positive Train Control Expenses and Investments AGENCY: Surface Transportation... investments and expenses. PTC is an automated system designed to prevent train-to-train collisions and other..., PTC expenditures are incorporated into the R-1 under the category of ``capital investments and...

Studying and Incorporating Efficiency into Gastrointestinal Endoscopy Centers

Directory of Open Access Journals (Sweden)

Lukejohn W. Day

2015-01-01

Full Text Available Efficiency is defined as the use of resources in such a way as to maximize the production of goods and services. Improving efficiency has been the focus of management in many industries; however, it has not been until recently that incorporating efficiency models into healthcare has occurred. In particular, the study and development of improvement projects aimed at enhancing efficiency in GI have been growing rapidly in recent years. This focus on improving efficiency in GI has been spurred by the dramatic rise in the demand for endoscopic procedures as well as the rising number of insured patients requiring GI care coupled at the same time with limited resources in terms of staffing and space in endoscopy centers. This paper will critically review the history of efficiency in endoscopy centers, first by looking at other healthcare industries that have extensively studied and improved efficiency in their fields, examine a number of proposed efficiency metrics and benchmarks in endoscopy centers, and finally discuss opportunities where endoscopy centers could improve their efficiency.

Incorporation of Mobile Application (App) Measures Into the Diagnosis of Smartphone Addiction.

Science.gov (United States)

Lin, Yu-Hsuan; Lin, Po-Hsien; Chiang, Chih-Lin; Lee, Yang-Han; Yang, Cheryl C H; Kuo, Terry B J; Lin, Sheng-Hsuan

2017-07-01

Global smartphone expansion has brought about unprecedented addictive behaviors. The current diagnosis of smartphone addiction is based solely on information from clinical interview. This study aimed to incorporate application (app)-recorded data into psychiatric criteria for the diagnosis of smartphone addiction and to examine the predictive ability of the app-recorded data for the diagnosis of smartphone addiction. Smartphone use data of 79 college students were recorded by a newly developed app for 1 month between December 1, 2013, and May 31, 2014. For each participant, psychiatrists made a diagnosis for smartphone addiction based on 2 approaches: (1) only diagnostic interview (standard diagnosis) and (2) both diagnostic interview and app-recorded data (app-incorporated diagnosis). The app-incorporated diagnosis was further used to build app-incorporated diagnostic criteria. In addition, the app-recorded data were pooled as a score to predict smartphone addiction diagnosis. When app-incorporated diagnosis was used as a gold standard for 12 candidate criteria, 7 criteria showed significant accuracy (area under receiver operating characteristic curve [AUC] > 0.7) and were constructed as app-incorporated diagnostic criteria, which demonstrated remarkable accuracy (92.4%) for app-incorporated diagnosis. In addition, both frequency and duration of daily smartphone use significantly predicted app-incorporated diagnosis (AUC = 0.70 for frequency; AUC = 0.72 for duration). The combination of duration, frequency, and frequency trend for 1 month can accurately predict smartphone addiction diagnosis (AUC = 0.79 for app-incorporated diagnosis; AUC = 0.71 for standard diagnosis). The app-incorporated diagnosis, combining both psychiatric interview and app-recorded data, demonstrated substantial accuracy for smartphone addiction diagnosis. In addition, the app-recorded data performed as an accurate screening tool for app-incorporated diagnosis. © Copyright 2017 Physicians

Wind Power Plant Control Optimisation with Incorporation of Wind Turbines and STATCOMs

DEFF Research Database (Denmark)

Petersen, Lennart; Kryezi, Fitim; Iov, Florin

2015-01-01

This paper addresses a detailed design and tuning of a wind power plant slope voltage control with reactive power contribution of wind turbines and STATCOMS. First, small-signal models of a single wind turbine and the whole wind power plant are developed, being appropriate for voltage control...... assessment. An exemplary wind power plant located in the United Kingdom and the corresponding grid code requirements are used as a base case. The final design and tuning process of the voltage controller results in a guidance, proposed for this particular control architecture. It provides qualitative...... outcomes regarding the impact of system delays, grid conditions and various operating conditions of the wind power plant, with and without incorporation of STATCOMS....

Future CANDU nuclear power plant design requirements document executive summary

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; S. A. Usmani

1996-03-01

The future CANDU Requirements Document (FCRED) describes a clear and complete statement of utility requirements for the next generation of CANDU nuclear power plants including those in Korea. The requirements are based on proven technology of PHWR experience and are intended to be consistent with those specified in the current international requirement documents. Furthermore, these integrated set of design requirements, incorporate utility input to the extent currently available and assure a simple, robust and more forgiving design that enhances the performance and safety. The FCRED addresses the entire plant, including the nuclear steam supply system and the balance of the plant, up to the interface with the utility grid at the distribution side of the circuit breakers which connect the switchyard to the transmission lines. Requirements for processing of low level radioactive waste at the plant site and spent fuel storage requirements are included in the FCRED. Off-site waste disposal is beyond the scope of the FCRED. 2 tabs., 1 fig. (Author) .new

The Deployment of Product-Related Environmental Legislation into Product Requirements

Directory of Open Access Journals (Sweden)

Daniela C. A. Pigosso

2016-04-01

Full Text Available Environmental legislation is increasingly changing its focus from manufacturing-oriented to product-oriented instruments. Compliance with product-related environmental legislation is achieved by the incorporation of environmental requirements into the early phases of the product development process (PDP. Nevertheless, the deployment of product-related environmental legislation into product requirements is still a challenge. This study followed an inductive approach to propose a guideline to support the identification, analysis and deployment of product requirements based on product-related environmental legislation. The guideline is composed of nine steps, clustered into three groups according to their main objective: (A identification of environmental product-related legislation; (B identification of legislative topics to be considered for the deployment of requirements; and (C creation and validation of product requirements. The product requirements deployed are to be considered during the PDP. The guideline was evaluated in an expert consultation in a large manufacturing company, suggesting that it can be used to support the systematization and deployment of product-related environmental requirements.

Incorporating Argumentation through Forensic Science

Science.gov (United States)

Wheeler, Lindsay B.; Maeng, Jennifer L.; Smetana, Lara K.

2014-01-01

This article outlines how to incorporate argumentation into a forensic science unit using a mock trial. Practical details of the mock trial include: (1) a method of scaffolding students' development of their argument for the trial, (2) a clearly outlined set of expectations for students during the planning and implementation of the mock…

Lung cancer risk and exposure from incorporated plutonium

International Nuclear Information System (INIS)

Koshurnikova, N.A.; Bolotnikova, M.G.; Il'in, L.A.

1996-01-01

Coefficients of risk of death from lung cancer caused by incorporated plutonium for the personnel of the Mayak plant, working there since its foundation are obtained. Values of mortality from lung cancer are analysed as well as individual incorporated dose per lung assessed from regular measurement of plutonium in the urine and radiometry of autopsy material and from the results of individual photocontrol of external exposure. It was shown that the risk of death from lung cancer caused by external gamma-irradiation is statistically unreliable, whereas that from disease caused by incorporated plutonium is dose-dependent. The risk of death from lung cancer is two times higher for the personnel with increased level of plutonium carriership as against the level stated in ICRP Publication 60. The conclusion is made that hygienic standards for lung exposure should be specified. 11 refs.; 3 figs.; 5 tabs

Incorporation feasibility of leather residues in bricks

Energy Technology Data Exchange (ETDEWEB)

Aguiar, J.B. [Minho Univ. (Portugal). Civil Engineering Dept.; Valente, A.; Pires, M.J. [Inst. of Development and Innovation Technology of Minho, Braga (Portugal); Tavares, T. [Biological Engineering Dept., Univ. of Minho, Braga (Portugal)

2002-07-01

The footwear industry has strips of leather as one of its by-products. These leather residues, due to their high chromium content, can be regarded as a threat to the environment, particularly if no care is taken with their disposal. With the incorporation of the residues in ceramic products, after trituration, is possible to neutralise the eventual toxicity of chromium. In a laboratory study we produced prismatic bricks using clay from the region and incorporating 1, 3 and 5% (by mass) of leather residues. This corresponds at about 20, 60 and 100% (by apparent volume). The moulds were filled up with paste and, in order to have some compactness, the ceramic paste was compressed with a spatula. After that, it began the process of drying and burning the bricks. They were tested to flexure, compression and leaching. The results showed that the toxicity of chromium disappeared in the bricks. The mechanical tests showed a decrease in strength for the specimens with leather residue. The compressive strength decreases about 22% for 1% of incorporation of leather residue. However, as bricks were lighter and more porous, we can expect that they are better for thermal isolation. (orig.)

Incorporation of Ba in Al and Fe pollucite

Energy Technology Data Exchange (ETDEWEB)

Vance, Eric R., E-mail: erv@ansto.gov.au [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, Locked Bag 2001 Kirrawee DC, NSW 2232 (Australia); Gregg, Daniel J.; Griffiths, Grant J. [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, Locked Bag 2001 Kirrawee DC, NSW 2232 (Australia); Gaugliardo, Paul R. [Centre for Microscopy, Characterisation and Analysis, The University of Western Australia, Crawley, WA 6009 (Australia); Grant, Charmaine [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, Locked Bag 2001 Kirrawee DC, NSW 2232 (Australia)

2016-09-15

Ba, the transmutation product of radioactive Cs, can be incorporated at levels of up to ∼0.07 formula units in Cs{sub (1−2x)}Ba{sub x}AlSi{sub 2}O{sub 6} aluminium pollucite formed by sol-gel methods and sintering at 1400 °C, with more Ba forming BaAl{sub 2}Si{sub 2}O{sub 8} phases. The effect of Ba substitution in pollucite-structured CsFeSi{sub 2}O{sub 6} was also studied and no evidence of Ba substitution in the pollucite structure via cation vacancies or Fe{sup 2+} formation was obtained. The Ba entered a Fe-silicate glass structure. Charge compensation was also attempted with a Cs{sup +} + Fe{sup 3+} ↔ Ba{sup 2+} + Ni{sup 2+} scheme but again the Ba formed a glass and NiO was evident. PCT leaching data showed CsFeSi{sub 2}O{sub 6} to be very leach resistant. - Highlights: • Barium can be incorporated into aluminium pollucite. • Positron annihilation lifetime spectroscopy supports a charge vacancy mechanism of incorporation. • Iron pollucite does not appear to incorporate any barium with either vacancy or charge compensation mechanisms. • Leaching data suggest iron pollucite is very leach resistant.

Functional Requirements for an Electronic Work Package System

Energy Technology Data Exchange (ETDEWEB)

Oxstrand, Johanna H. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-12-01

This document provides a set of high level functional requirements for a generic electronic work package (eWP) system. The requirements have been identified by the U.S. nuclear industry as a part of the Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative. The functional requirements are mainly applied to eWP system supporting Basic and Moderate types of smart documents, i.e., documents that have fields for recording input such as text, dates, numbers, and equipment status, and documents which incorporate additional functionalities such as form field data “type“ validation (e.g. date, text, number, and signature) of data entered and/or self-populate basic document information (usually from existing host application meta data) on the form when the user first opens it. All the requirements are categorized by the roles; Planner, Supervisor, Craft, Work Package Approval Reviewer, Operations, Scheduling/Work Control, and Supporting Functions. The categories Statistics, Records, Information Technology are also included used to group the requirements. All requirements are presented in Section 2 through Section 11. Examples of more detailed requirements are provided for the majority of high level requirements. These examples are meant as an inspiration to be used as each utility goes through the process of identifying their specific requirements. The report’s table of contents provides a summary of the high level requirements.

Alteration of sediments by hyperalkaline K-rich cement leachate: implications for strontium adsorption and incorporation.

Science.gov (United States)

Wallace, Sarah H; Shaw, Samuel; Morris, Katherine; Small, Joe S; Burke, Ian T

2013-04-16

Results are presented from 1 year batch experiments where K-rich hyperalkaline pH 13.5 young cement water (YCW) was reacted with sediments to investigate the effect of high pH, mineral alteration, and secondary mineral precipitation on (90)Sr sorption. After reaction with YCW, Sr sorption was found to be greater than 75% in all samples up to 365 days and 98% in a sample reacted for 365 days at 70 °C. Scanning electron microscopy analysis of sediment samples reacted at room temperature showed surface alteration and precipitation of a secondary phase, likely a K-rich aluminosilicate gel. The presence of Sr-Si(Al) bond distances in Sr K-edge extended X-ray absorption fine structure (EXAFS) analysis suggested that the Sr was present as an inner-sphere adsorption complex. However, sequential extractions found the majority of this Sr was still exchangeable with Mg(2+) at pH 7. For the sample reacted for 1 year at 70 °C, EXAFS analysis revealed clear evidence for ∼6 Sr-Si(Al) backscatters at 3.45 Å, consistent with Sr incorporation into the neoformed K-chabazite phase that was detected by X-ray diffraction and electron microscopy. Once incorporated into chabazite, (90)Sr was not exchangeable with Mg(2+), and chemical leaching with pH 1.5 HNO3 was required to remobilize 60% of the (90)Sr. These results indicate that, in high pH cementitious leachate, there is significantly enhanced Sr retention in sediments due to changes in the adsorption mechanism and incorporation into secondary silicate minerals. This suggests that Sr retention may be enhanced in this high pH zone and that the incorporation process may lead to irreversible exchange of the contaminant over extended time periods.

Quantitative isotope incorporation reveals substrate partitioning in a coastal microbial community.

Science.gov (United States)

Mayali, Xavier; Weber, Peter K

2018-05-01

To quantitatively link microbial identity with biogeochemical function, we carried out 14 simultaneous stable isotope probing experiments with organic and inorganic C and N substrates to measure the isotope incorporation by over one hundred co-occurring eukaryotic and prokaryotic populations in a coastal community. We found that nitrate was the most commonly incorporated substrate, and that light-driven carbon fixation was carried out by some bacterial taxa from the Flavobacteriales and OM60 (NOR5) clade, in addition to photoautotrophic phytoplankton. We found that organisms that incorporated starch, maltose, glucose, lactose and bicarbonate were phylogenetically clustered, suggesting that specific bacterial lineages specialized in the incorporation of these substrates. The data further revealed that coastal microorganisms spanned a range of resource utilization strategies from generalists to specialists and demonstrated a high level of substrate partitioning, with two thirds of taxa exhibiting unique substrate incorporation patterns and the remaining third shared by no more than three OTUs each. Specialists exhibited more extreme incorporation levels (high or low), whereas generalists displayed more intermediate activity levels. These results shed valuable insights into the bottom-up ecological strategies enabling the persistence of high microbial diversity in aquatic ecosystems.

/sup 3/H-UTP incorporation in polytene chromosomes of Chironomus permeabilized cells

Energy Technology Data Exchange (ETDEWEB)

Diez, J L; de la Torre, C [Consejo Superior de Investigacionis Cientificas, Madrid (Spain). Inst. Biologia Celular

1979-01-01

A method is described that allows the cytologic detection of the transcriptional activity of endogenous RNA polymerase in fixed Chironomus polytene chromosomes. /sup 3/H-UTP is preferentially incorporated onto nucleoli and Balbiani rings where transcription is specially high. The former incorporation was sensitive to actinomycin D while incorporation on Balbiani rings was sensitive to ..cap alpha..-amanitin. The label pattern and frequency resemble those detected by /sup 3/H-uridine incorporation in the living state.

40 CFR 174.516 - Coat protein of cucumber mosaic virus; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Coat protein of cucumber mosaic virus; exemption from the requirement of a tolerance. 174.516 Section 174.516 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and Tolerance...

40 CFR 174.515 - Coat Protein of Papaya Ringspot Virus; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Coat Protein of Papaya Ringspot Virus; exemption from the requirement of a tolerance. 174.515 Section 174.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and Tolerance...

40 CFR 174.509 - Bacillus thuringiensis Cry3A protein; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry3A protein; exemption from the requirement of a tolerance. 174.509 Section 174.509 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and Tolerance...

MoO3 incorporation in magnesium aluminosilicate glasses

International Nuclear Information System (INIS)

Tan, Shengheng; Ojovan, Michael I.; Hyatt, Neil C.; Hand, Russell J.

2015-01-01

Molybdate has a very low solubility in silicate and borosilicate glass systems and its excess presence in nuclear waste glass can cause the formation of a readily soluble “yellow phase”. In this study, the incorporation of molybdenum oxide (MoO 3 ) in a magnesium aluminosilicate glass system has been investigated. The prepared glasses show a higher than 90% molybdenum retention rate and up to 5.34 mol% (12.28 wt%) MoO 3 can be incorporated into these glasses without causing visible phase separation. The incorporation of MoO 3 increases glass density, decreases glass transition and crystallisation temperatures and intensifies Raman bands assigned to vibrations of MoO 4 2− units. When excess molybdate is added liquid–liquid phase separation and crystallisation occurs. The separated phase is spherical, 200–400 nm in diameter and randomly dispersed. Based on powder X-ray diffraction, Raman spectroscopy and transmission electron microscopy, the separated phase is identified as MgMoO 4

Thymidine uptake, thymidine incorporation, and thymidine kinase activity in marine bacterium isolates

International Nuclear Information System (INIS)

Jeffrey, W.H.; Paul, J.H.

1990-01-01

One assumption made in bacterial production estimates from [ 3 H]thymidine incorporation is that all heterotrophic bacteria can incorporate exogenous thymidine into DNA. Heterotrophic marine bacterium isolates from Tampa Bay, Fla., Chesapeake Bay, Md., and a coral surface microlayer were examined for thymidine uptake (transport), thymidine incorporation, the presence of thymidine kinase genes, and thymidine kinase enzyme activity. Of the 41 isolates tested, 37 were capable of thymidine incorporation into DNA. The four organisms that could not incorporate thymidine also transported the thymidine poorly and lacked thymidine kinase activity. Attempts to detect thymidine kinase genes in the marine isolates by molecular probing with gene probes made from Escherichia coli and herpes simplex virus thymidine kinase genes proved unsuccessful. To determine if the inability to incorporate thymidine was due to the lack of thymidine kinase, one organism, Vibro sp. strain DI9, was transformed with a plasmid (pGQ3) that contained an E. coli thymidine kinase gene. Although enzyme assays indicated high levels of thymidine kinase activity in transformants, these cells still failed to incorporate exogenous thymidine into DNA or to transport thymidine into cells. These results indicate that the inability of certain marine bacteria to incorporate thymidine may not be solely due to the lack of thymidine kinase activity but may also be due to the absence of thymidine transport systems

Calculated activity incorporated in the therapy with I131

International Nuclear Information System (INIS)

Chica, L.G.; Puerta, J.A.

1998-01-01

By means of the product S(T→ S).A s (T e ), the absorbed dose to thyroid delivered by I 131 incorporated is calculated. Where S(T→ S) is the absorbed dose in the thyroid per nuclear transformation (tn.) of I 131 localized in the thyroid and as a potential function of the mass is expressed. A s (T e ) is the number of tn. of I 131 in the thyroid since the moment of the incorporation until the time T e (the effective middle time); to find A s (T e ) to normal as different pathological conditions, the metabolic model of the iodo proposed by the ICRP is used. Of the expressions of the doses, the incorporated activity, l o , is obtained

Wind Energy Management System EMS Integration Project: Incorporating Wind Generation and Load Forecast Uncertainties into Power Grid Operations

Energy Technology Data Exchange (ETDEWEB)

Makarov, Yuri V.; Huang, Zhenyu; Etingov, Pavel V.; Ma, Jian; Guttromson, Ross T.; Subbarao, Krishnappa; Chakrabarti, Bhujanga B.

2010-01-01

The power system balancing process, which includes the scheduling, real time dispatch (load following) and regulation processes, is traditionally based on deterministic models. Since the conventional generation needs time to be committed and dispatched to a desired megawatt level, the scheduling and load following processes use load and wind and solar power production forecasts to achieve future balance between the conventional generation and energy storage on the one side, and system load, intermittent resources (such as wind and solar generation), and scheduled interchange on the other side. Although in real life the forecasting procedures imply some uncertainty around the load and wind/solar forecasts (caused by forecast errors), only their mean values are actually used in the generation dispatch and commitment procedures. Since the actual load and intermittent generation can deviate from their forecasts, it becomes increasingly unclear (especially, with the increasing penetration of renewable resources) whether the system would be actually able to meet the conventional generation requirements within the look-ahead horizon, what the additional balancing efforts would be needed as we get closer to the real time, and what additional costs would be incurred by those needs. To improve the system control performance characteristics, maintain system reliability, and minimize expenses related to the system balancing functions, it becomes necessary to incorporate the predicted uncertainty ranges into the scheduling, load following, and, in some extent, into the regulation processes. It is also important to address the uncertainty problem comprehensively by including all sources of uncertainty (load, intermittent generation, generators’ forced outages, etc.) into consideration. All aspects of uncertainty such as the imbalance size (which is the same as capacity needed to mitigate the imbalance) and generation ramping requirement must be taken into account. The latter

Instruction of the CSN on the requirements of the system of management of the nuclear power plants

International Nuclear Information System (INIS)

Cid, R.; Santo, A. de; Gil Montes, B.; Toca, A.

2008-01-01

The Western European Nations Regulatory Authorities (WENRA) performed a nuclear safety requirements harmonization task, as a result of this work and its implementation, the Spanish Nuclear Safety Counsel (CSN) has the commitment to issue its own Regulation Safety Instructions) to identify the WENRA to level nuclear safety requirements, and to incorporate it in the Spanish regulatory pyramid. However, the Spain nuclear installations meet these requirements through the original criteria to fulfill the regulation of the country that supply the NSSS design, these requirements are not incorporated in our regulation. One of the issues, identified by WENRA, is the implementation of the management system requirements in accord with the IAEA GS-R-3 The Management System for Facilities and Activities. As these regards, the CSN has developed a Safety Instruction, basically endorsing the IAEA GS-R-3. The Safety Instruction is actually in a phase of external comments and should be issued by june 2008. This paper describes the bases for the Safety Instruction, summarises the requirements that would meet the management system for nuclear installations and the activities to perform for its implementations. (Author)

Understanding the relationship between Kano model's customer satisfaction scores and self-stated requirements importance.

Science.gov (United States)

Mkpojiogu, Emmanuel O C; Hashim, Nor Laily

2016-01-01

Customer satisfaction is the result of product quality and viability. The place of the perceived satisfaction of users/customers for a software product cannot be neglected especially in today competitive market environment as it drives the loyalty of customers and promotes high profitability and return on investment. Therefore understanding the importance of requirements as it is associated with the satisfaction of users/customers when their requirements are met is worth the pain considering. It is necessary to know the relationship between customer satisfactions when their requirements are met (or their dissatisfaction when their requirements are unmet) and the importance of such requirement. So many works have been carried out on customer satisfaction in connection with the importance of requirements but the relationship between customer satisfaction scores (coefficients) of the Kano model and users/customers self-stated requirements importance have not been sufficiently explored. In this study, an attempt is made to unravel the underlying relationship existing between Kano model's customer satisfaction indexes and users/customers self reported requirements importance. The results of the study indicate some interesting associations between these considered variables. These bivariate associations reveal that customer satisfaction index (SI), and average satisfaction coefficient (ASC) and customer dissatisfaction index (DI) and average satisfaction coefficient (ASC) are highly correlated (r = 96 %) and thus ASC can be used in place of either SI or DI in representing customer satisfaction scores. Also, these Kano model's customer satisfaction variables (SI, DI, and ASC) are each associated with self-stated requirements importance (IMP). Further analysis indicates that the value customers or users place on requirements that are met or on features that are incorporated into a product influences the level of satisfaction such customers derive from the product. The

Digital video technologies and their network requirements

Energy Technology Data Exchange (ETDEWEB)

R. P. Tsang; H. Y. Chen; J. M. Brandt; J. A. Hutchins

1999-11-01

Coded digital video signals are considered to be one of the most difficult data types to transport due to their real-time requirements and high bit rate variability. In this study, the authors discuss the coding mechanisms incorporated by the major compression standards bodies, i.e., JPEG and MPEG, as well as more advanced coding mechanisms such as wavelet and fractal techniques. The relationship between the applications which use these coding schemes and their network requirements are the major focus of this study. Specifically, the authors relate network latency, channel transmission reliability, random access speed, buffering and network bandwidth with the various coding techniques as a function of the applications which use them. Such applications include High-Definition Television, Video Conferencing, Computer-Supported Collaborative Work (CSCW), and Medical Imaging.

GDP-tubulin incorporation into growing microtubules modulates polymer stability.

Science.gov (United States)

Valiron, Odile; Arnal, Isabelle; Caudron, Nicolas; Job, Didier

2010-06-04

Microtubule growth proceeds through the endwise addition of nucleotide-bound tubulin dimers. The microtubule wall is composed of GDP-tubulin subunits, which are thought to come exclusively from the incorporation of GTP-tubulin complexes at microtubule ends followed by GTP hydrolysis within the polymer. The possibility of a direct GDP-tubulin incorporation into growing polymers is regarded as hardly compatible with recent structural data. Here, we have examined GTP-tubulin and GDP-tubulin incorporation into polymerizing microtubules using a minimal assembly system comprised of nucleotide-bound tubulin dimers, in the absence of free nucleotide. We find that GDP-tubulin complexes can efficiently co-polymerize with GTP-tubulin complexes during microtubule assembly. GDP-tubulin incorporation into microtubules occurs with similar efficiency during bulk microtubule assembly as during microtubule growth from seeds or centrosomes. Microtubules formed from GTP-tubulin/GDP-tubulin mixtures display altered microtubule dynamics, in particular a decreased shrinkage rate, apparently due to intrinsic modifications of the polymer disassembly properties. Thus, although microtubules polymerized from GTP-tubulin/GDP-tubulin mixtures or from homogeneous GTP-tubulin solutions are both composed of GDP-tubulin subunits, they have different dynamic properties, and this may reveal a novel form of microtubule "structural plasticity."

Isotope incorporation in broad-snouted caimans (crocodilians

Directory of Open Access Journals (Sweden)

Stephane Caut

2013-05-01

The trophic ecology and migration of vertebrate species have been increasingly studied using stable isotope analysis. However, this approach requires knowledge on how dietary isotopic values are reflected in consumers' tissues. To date, this information has only been obtained for a handful of ectotherms; in particular, little is known about crocodilians. In this study, diet-tissue discrimination factors (DTDFs and carbon and nitrogen stable isotope turnover rates were estimated for plasma, red blood cells (RBCs, and muscle obtained from broad-snouted caimans (Caiman latirostris. Individuals were fed two different control diets for 189 days. DTDFs for δ15N (Δ15N and δ13C (Δ13C ranged from −2.24‰ to 0.39‰ and from −0.52‰ to 1.06‰, respectively. Isotope turnover rates in tissues, expressed as half-lives, ranged from 11 to 71 days, with plasmaincorporation data should help inform future interpretations of isotopic values obtained in the field for this taxon.

Active Microwave Metamaterials Incorporating Ideal Gain Devices

Directory of Open Access Journals (Sweden)

Hao Xin

2010-12-01

Full Text Available Incorporation of active devices/media such as transistors for microwave and gain media for optics may be very attractive for enabling desired low loss and broadband metamaterials. Such metamaterials can even have gain which may very well lead to new and exciting physical phenomena. We investigate microwave composite right/left-handed transmission lines (CRLH-TL incorporating ideal gain devices such as constant negative resistance. With realistic lumped element values, we have shown that the negative phase constant of this kind of transmission lines is maintained (i.e., left-handedness kept while gain can be obtained (negative attenuation constant of transmission line simultaneously. Possible implementation and challenging issues of the proposed active CRLH-TL are also discussed.

Adsorption, Desorption, Surface Diffusion, Lattice Defect Formation, and Kink Incorporation Processes of Particles on Growth Interfaces of Colloidal Crystals with Attractive Interactions

Directory of Open Access Journals (Sweden)

Yoshihisa Suzuki

2016-07-01

Full Text Available Good model systems are required in order to understand crystal growth processes because, in many cases, precise incorporation processes of atoms or molecules cannot be visualized easily at the atomic or molecular level. Using a transmission-type optical microscope, we have successfully observed in situ adsorption, desorption, surface diffusion, lattice defect formation, and kink incorporation of particles on growth interfaces of colloidal crystals of polystyrene particles in aqueous sodium polyacrylate solutions. Precise surface transportation and kink incorporation processes of the particles into the colloidal crystals with attractive interactions were observed in situ at the particle level. In particular, contrary to the conventional expectations, the diffusion of particles along steps around a two-dimensional island of the growth interface was not the main route for kink incorporation. This is probably due to the number of bonds between adsorbed particles and particles in a crystal; the number exceeds the limit at which a particle easily exchanges its position to the adjacent one along the step. We also found novel desorption processes of particles from steps to terraces, attributing them to the assistance of attractive forces from additionally adsorbing particles to the particles on the steps.

Incorporating contact angles in the surface tension force with the ACES interface curvature scheme

Science.gov (United States)

Owkes, Mark

2017-11-01

In simulations of gas-liquid flows interacting with solid boundaries, the contact line dynamics effect the interface motion and flow field through the surface tension force. The surface tension force is directly proportional to the interface curvature and the problem of accurately imposing a contact angle must be incorporated into the interface curvature calculation. Many commonly used algorithms to compute interface curvatures (e.g., height function method) require extrapolating the interface, with defined contact angle, into the solid to allow for the calculation of a curvature near a wall. Extrapolating can be an ill-posed problem, especially in three-dimensions or when multiple contact lines are near each other. We have developed an accurate methodology to compute interface curvatures that allows for contact angles to be easily incorporated while avoiding extrapolation and the associated challenges. The method, known as Adjustable Curvature Evaluation Scale (ACES), leverages a least squares fit of a polynomial to points computed on the volume-of-fluid (VOF) representation of the gas-liquid interface. The method is tested by simulating canonical test cases and then applied to simulate the injection and motion of water droplets in a channel (relevant to PEM fuel cells).

Evidence that Vpu modulates HIV-1 Gag-envelope interaction towards envelope incorporation and infectivity in a cell type dependent manner.

Directory of Open Access Journals (Sweden)

Archana Gautam

Full Text Available The HIV-1 Vpu is required for efficient virus particle release from the plasma membrane and intracellular CD4 degradation in infected cells. In the present study, we found that the loss of virus infectivity as a result of envelope (Env incorporation defect caused by a Gag matrix (MA mutation (L30E was significantly alleviated by introducing a start codon mutation in vpu. Inactivation of Vpu partially restored the Env incorporation defect imposed by L30E substitution in MA. This effect was found to be comparable in cell types such as 293T, HeLa, NP2 and GHOST as well as in peripheral blood mononuclear cells (PBMC and monocyte-derived macrophages (MDM. However, in HeLa cells BST-2 knockdown was found to further alleviate the effect of Vpu inactivation on infectivity of L30E mutant. Our data demonstrated that the impaired infectivity of virus particles due to Env incorporation defect caused by MA mutation was modulated by start codon mutation in Vpu.

Incorporation of mammalian actin into microfilaments in plant cell nucleus

Directory of Open Access Journals (Sweden)

Paves Heiti

2004-04-01

Full Text Available Abstract Background Actin is an ancient molecule that shows more than 90% amino acid homology between mammalian and plant actins. The regions of the actin molecule that are involved in F-actin assembly are largely conserved, and it is likely that mammalian actin is able to incorporate into microfilaments in plant cells but there is no experimental evidence until now. Results Visualization of microfilaments in onion bulb scale epidermis cells by different techniques revealed that rhodamine-phalloidin stained F-actin besides cytoplasm also in the nuclei whereas GFP-mouse talin hybrid protein did not enter the nuclei. Microinjection of fluorescently labeled actin was applied to study the presence of nuclear microfilaments in plant cells. Ratio imaging of injected fluorescent rabbit skeletal muscle actin and phalloidin staining of the microinjected cells showed that mammalian actin was able to incorporate into plant F-actin. The incorporation occurred preferentially in the nucleus and in the perinuclear region of plant cells whereas part of plant microfilaments, mostly in the periphery of cytoplasm, did not incorporate mammalian actin. Conclusions Microinjected mammalian actin is able to enter plant cell's nucleus, whereas incorporation of mammalian actin into plant F-actin occurs preferentially in the nucleus and perinuclear area.

Growth Inhibition of Sporomusa ovata by Incorporation of Benzimidazole Bases into Cobamides

Science.gov (United States)

Mok, Kenny C.

2013-01-01

Phenolyl cobamides are unique members of a class of cobalt-containing cofactors that includes vitamin B12 (cobalamin). Cobamide cofactors facilitate diverse reactions in prokaryotes and eukaryotes. Phenolyl cobamides are structurally and chemically distinct from the more commonly used benzimidazolyl cobamides such as cobalamin, as the lower axial ligand is a phenolic group rather than a benzimidazole. The functional significance of this difference is not well understood. Here we show that in the bacterium Sporomusa ovata, the only organism known to synthesize phenolyl cobamides, several cobamide-dependent acetogenic metabolisms have a requirement or preference for phenolyl cobamides. The addition of benzimidazoles to S. ovata cultures results in a decrease in growth rate when grown on methanol, 3,4-dimethoxybenzoate, H2 plus CO2, or betaine. Suppression of native p-cresolyl cobamide synthesis and production of benzimidazolyl cobamides occur upon the addition of benzimidazoles, indicating that benzimidazolyl cobamides are not functionally equivalent to the phenolyl cobamide cofactors produced by S. ovata. We further show that S. ovata is capable of incorporating other phenolic compounds into cobamides that function in methanol metabolism. These results demonstrate that S. ovata can incorporate a wide range of compounds as cobamide lower ligands, despite its preference for phenolyl cobamides in the metabolism of certain energy substrates. To our knowledge, S. ovata is unique among cobamide-dependent organisms in its preferential utilization of phenolyl cobamides. PMID:23417488

Incorporation and Effects of Nanoparticles in a Supramolecular Polymer

Science.gov (United States)

2016-05-01

polymerizations and main-chain supramolecular polymers . Macromolecules. 2009;42:6823–6835. 17. Wojtecki RJ, Meador MA, Rowan SJ. Using the dynamic bond...ARL-TR-7687 ● MAY 2016 US Army Research Laboratory Incorporation and Effects of Nanoparticles in a Supramolecular Polymer by...Laboratory Incorporation and Effects of Nanoparticles in a Supramolecular Polymer by Alice M Savage Oak Ridge Institute of Science and Education

Incorporating political socialization theory into baccalaureate nursing education.

Science.gov (United States)

Brown, S G

1996-01-01

Political socialization theory explains how an individual develops a political belief system. As the health care system undergoes dramatic changes, nursing faculty should use political socialization theory to enhance the education of student nurses. A political thread can be woven through the nursing curricula, and students can be socialized to the political role. The new generation of nurses must incorporate a political component into their professional role identity. Political socialization theory can guide nursing faculty as knowledge of the political system and political skills are incorporated into nursing curricula.

Selective incorporation of 5-hydroxytryptophan into proteins in mammalian cells

Science.gov (United States)

Zhang, Zhiwen; Alfonta, Lital; Schultz, Peter G

2014-02-25

This invention provides methods and compositions for incorporation of an unnatural amino acid into a peptide using an orthogonal aminoacyl tRNA synthetase/tRNA pair. In particular, an orthogonal pair is provided to incorporate 5-hydroxy-L-tryptophan in a position encoded by an opal mutation.

Enhancement of antibacterial activity in nanofillers incorporated PSF/PVP membranes

Science.gov (United States)

Pramila, P.; Gopalakrishnan, N.

2018-04-01

An attempt has been made to investigate the nanofillers incorporated polysulfone (PSF) and polyvinylpyrrolidone (PVP) polymer membranes prepared by phase inversion method. Initially, the nanofillers, viz, Zinc Oxide (ZnO) nanoparticle, Graphene Oxide-Zinc Oxide (GO-ZnO) nanocomposite were synthesized and then directly incorporated into PSF/PVP blend during the preparation of membranes. The prepared membranes have been subjected to FE-SEM, AFM, BET, contact angle, tensile test and anti-bacterial studies. Significant membrane morphologies and nanoporous properties have been observed by FE-SEM and BET, respectively. It has been observed that hydrophilicity, mechanical strength and water permeability of the ZnO and GO-ZnO incorporated membranes were enhanced than bare membrane. Antibacterial activity was assessed by measuring the inhibition zones formed around the membrane by disc-diffusion method using Escherichia coli (gram-negative) as a model bacterium. Again, it has been observed that nanofillers incorporated membrane exhibits high antibacterial performance compared to bare membrane.

Incorporating Feminism into Rehabilitation Counselor Education

Science.gov (United States)

Jeon, Mookyong

2015-01-01

Purpose: The author describes how rehabilitation counselor educators can incorporate the feminist perspective in teaching rehabilitation counselors-in-training by exploring history, core values, and training methods of feminism. Method: Based on a literature review, the author compares philosophy and concepts of rehabilitation counseling and…

Onondaga Noun Incorporation: Some Notes on the Interdependence of Syntax and Semantics

Science.gov (United States)

Woodbury, Hanni

1975-01-01

In Onondaga and all northern Iroquoian languages, nouns can be incorporated into verbs. The function of this is semantic as well as syntactic. It is semantic in that the sense of an incorporated noun will be narrower than its unincorporated counterpart regardless of modifiers. Incorporation changes the transformational structure of the sentence.…

[3H] Thymidine incorporation to estimate growth rates of anaerobic bacterial strains

International Nuclear Information System (INIS)

Winding, A.

1992-01-01

The incorporation of [ 3 H] thymidine by axenic cultures of anaerobic bacteria was investigated as a means to measure growth. The three fermentative strains and one of the methanogenic strains tested incorporated [ 3 H] thymidine during growth. It is concluded that the [ 3 H] thymidine incorporation method underestimates bacterial growth in anaerobic environments

Requirements for facilities transferring or receiving select agents. Final rule.

Science.gov (United States)

2001-08-31

CDC administers regulations that govern the transfer of certain biological agents and toxins ("select agents"). These regulations require entities that transfer or receive select agents to register with CDC and comply with biosafety standards contained in the Third Edition of the CDC/NIH publication "Biosafety in Microbiological and Biomedical Laboratories ("BMBL")." On October 28,1999, CDC published a Notice of Proposed Rulemaking ("NPRM") seeking both to revise the biosafety standards facilities must follow when handling select agents and to provide new biosecurity standards for such facilities. These new standards are contained in the Fourth Edition of BMBL, which the NPRM proposed to incorporate by reference, thereby replacing the Third Edition. No comments were received in response to this proposal. CDC is therefore amending its regulations to incorporate the Fourth Edition.

Digital terrain model generalization incorporating scale, semantic and cognitive constraints

Science.gov (United States)

Partsinevelos, Panagiotis; Papadogiorgaki, Maria

2014-05-01

Cartographic generalization is a well-known process accommodating spatial data compression, visualization and comprehension under various scales. In the last few years, there are several international attempts to construct tangible GIS systems, forming real 3D surfaces using a vast number of mechanical parts along a matrix formation (i.e., bars, pistons, vacuums). Usually, moving bars upon a structured grid push a stretching membrane resulting in a smooth visualization for a given surface. Most of these attempts suffer either in their cost, accuracy, resolution and/or speed. Under this perspective, the present study proposes a surface generalization process that incorporates intrinsic constrains of tangible GIS systems including robotic-motor movement and surface stretching limitations. The main objective is to provide optimized visualizations of 3D digital terrain models with minimum loss of information. That is, to minimize the number of pixels in a raster dataset used to define a DTM, while reserving the surface information. This neighborhood type of pixel relations adheres to the basics of Self Organizing Map (SOM) artificial neural networks, which are often used for information abstraction since they are indicative of intrinsic statistical features contained in the input patterns and provide concise and characteristic representations. Nevertheless, SOM remains more like a black box procedure not capable to cope with possible particularities and semantics of the application at hand. E.g. for coastal monitoring applications, the near - coast areas, surrounding mountains and lakes are more important than other features and generalization should be "biased"-stratified to fulfill this requirement. Moreover, according to the application objectives, we extend the SOM algorithm to incorporate special types of information generalization by differentiating the underlying strategy based on topologic information of the objects included in the application. The final

A Collaborative Approach to Incorporating Statistics in the Physiology Classroom

Science.gov (United States)

Potterfield, April; Majerus, Mary

2008-01-01

Both the National Science Education Standards (NSES) and the National Council of Teachers of Mathematics (NCTM) recommend appropriately incorporating mathematics into other disciplines (NRC 1996; NRC 2003; NCTM 2000). With this in mind, an interdisciplinary, inquiry-based project was undertaken to incorporate mathematical analysis of data into a…

Synthesis and characterization of Au incorporated Alq3 nanowires

Science.gov (United States)

Khan, Mohammad Bilal; Ahmad, Sultan; Parwaz, M.; Rahul, Khan, Zishan H.

2018-05-01

We report the synthesis and characterization of pure and Au incorporated Alq3 nanowires. These nanowires are synthesized using thermal vapor transport method. The luminescence intensity of Au incorporated Alq3 nanowires are recorded to be higher than that of pure Alq3 nanowires, which is found to increase with the increase in Au concentration. Fluorescence quenching is also observed when Au concentration is increased beyond the certain limit.

Conceptualising how SMEs incorporate green content in their websites

OpenAIRE

Craig M. Parker; Emilia Bellucci; Luba Torlina; Ambika Zutshi; Bardo Fraunholz

2014-01-01

This paper presents a framework on how Small and Medium Enterprises (SMEs) can proactively incorporate content relating to their ecological responsibility (or green) activities in their websites. SME studies offer limited guidance on, and conceptualisation of, how organisations can incorporate different types of content into their website designs. This paper addresses this problem by presenting the results of an exploratory, qualitative content analysis of Australian SME websites where emerge...

Review of grid code frequency requirements for wind farms

Energy Technology Data Exchange (ETDEWEB)

El Itani, S.; Joos, G. [McGill Univ., Montreal, PQ (Canada)

2010-07-01

This paper presented frequency grid code requirements for the connection of wind farms to power systems at the high voltage level. The necessity of ensuring that connected wind farms will contribute to the secure operation of the power system in a manner similar to conventional generators has led to the development of several grid code requirements (GCRs) for the integration of wind farms to the grid. These provisions are in place to ensure that wind projects do not negatively impact system stability and reliability. A comparative overview of the main requirements was conducted, looking at national and regional codes from areas with high wind penetration levels. These requirements provide wind farms with the control and regulation capabilities encountered in conventional power plants, which is necessary for the safe, reliable, and economic operation of the system. These requirements have heavily influenced the development of wind turbine generator (WTGs) technology over the last decade. It was concluded that modern WTGs are capable of meeting all the requirements thus far set for active power and ramp rates, extended frequency range, and frequency response required for functional incorporation into modern power grids. 17 refs., 6 tabs., 11 figs.

40 CFR 174.502 - Bacillus thuringiensis Cry1A.105 protein; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry1A.105 protein; exemption from the requirement of a tolerance. 174.502 Section 174.502 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and...

Physicochemical and Antioxidant Properties of Chitosan Films Incorporated with Cinnamon Oil

Directory of Open Access Journals (Sweden)

Marco A. López-Mata

2015-01-01

Full Text Available Chitosan films (CF with cinnamon bark oil (CO incorporated at 0% (control, 0.25%, 0.5%, and 1.0% v/v were prepared by an emulsion method. The films were characterized based on their physical properties (solubility, water vapor permeability, optical property, and microstructure and antioxidant properties (DPPH, ABTS, and its protective effects on human erythrocytes. The results showed that the incorporation of 0.5 and 1.0% of CO into the CF significantly decreased its solubility to 22% of the control (p<0.05. The water vapor permeability of the CF-CO was significantly reduced to 40% with low concentrations of CO (0.25% incorporated into the CF. In general, the films presented a yellow coloration and an increase in transparency with the incorporation of CO into the CF. It was also observed that the incorporation of CO increased the antioxidant activity between 6.0-fold and 14.5-fold compared to the control, and the protective capacity against erythrocyte hemolysis increased by as much as 80%.

Semiconducting compounds and devices incorporating same

Science.gov (United States)

Marks, Tobin J.; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

2016-01-19

Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

Microstructural analysis of clayey ceramic incorporated with fluorescent lamp glass

International Nuclear Information System (INIS)

Morais, A.S.C.; Caldas, T.C.C.; Pereira, P.S.; Monteiro, S.N.; Vieira, C.M.F.

2011-01-01

This study aims to evaluate the effect of the incorporation of glass powder fluorescent lamp, from a decontamination process, in the microstructure of clayey ceramic. Formulations were prepared with incorporation of the waste in amounts of up to 10 wt.% into the clayey body. Specimens were prepared by uniaxial mold-press at 20 MPa and then fired at 850 and 1050°C. After firing, the microstructure of the ceramics was evaluated by optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results showed that the incorporation of glass powder into the clayey body changes the microstructure of the ceramics. (author)

An effective technique for the software requirements analysis of NPP safety-critical systems, based on software inspection, requirements traceability, and formal specification

International Nuclear Information System (INIS)

Koo, Seo Ryong; Seong, Poong Hyun; Yoo, Junbeom; Cha, Sung Deok; Yoo, Yeong Jae

2005-01-01

A thorough requirements analysis is indispensable for developing and implementing safety-critical software systems such as nuclear power plant (NPP) software systems because a single error in the requirements can generate serious software faults. However, it is very difficult to completely analyze system requirements. In this paper, an effective technique for the software requirements analysis is suggested. For requirements verification and validation (V and V) tasks, our technique uses software inspection, requirement traceability, and formal specification with structural decomposition. Software inspection and requirements traceability analysis are widely considered the most effective software V and V methods. Although formal methods are also considered an effective V and V activity, they are difficult to use properly in the nuclear fields as well as in other fields because of their mathematical nature. In this work, we propose an integrated environment (IE) approach for requirements, which is an integrated approach that enables easy inspection by combining requirement traceability and effective use of a formal method. The paper also introduces computer-aided tools for supporting IE approach for requirements. Called the nuclear software inspection support and requirements traceability (NuSISRT), the tool incorporates software inspection, requirement traceability, and formal specification capabilities. We designed the NuSISRT to partially automate software inspection and analysis of requirement traceability. In addition, for the formal specification and analysis, we used the formal requirements specification and analysis tool for nuclear engineering (NuSRS)

THE INCORPORATION OF RADIOACTIVITY FROM GLYCINE-C$sup 14$ BY MAMMALIAN SPERMATOZOA

Energy Technology Data Exchange (ETDEWEB)

Graves, C. N.

1962-05-15

The metabolic pathways of glycine incorporation were investigated by biochemical and radibautographic methods. Results show that glycine is utilized hy bovine spermatoza and is incorporated into all fractions of the sperm cell. Incorporation into the nucleic acid fraction and especially into thymine indicates that there is a turnover in the desoxyribenucleic acid during storage of bovine spermatoza. (C.H.)

Controlled nitrogen incorporation in GaNSb alloys

Directory of Open Access Journals (Sweden)

M. J. Ashwin

2011-09-01

Full Text Available The incorporation of N in molecular-beam epitaxy of GaNxSb1−x alloys with x ⩽ 0.022 has been investigated as a function of temperature (325–400°C and growth rate 0.25–1.6 μmh−1. At fixed growth rate, the incorporated N fraction increases as the temperature is reduced until a maximum N content for the particular growth rate reached. At each temperature, there is a range of growth rates over which the N content is inversely proportional to the growth rate; the results are understood in terms of a kinetic model. The systematic growth rate- and temperature-dependence enables the N content and resulting band gap to be controlled.

Fluorine incorporation during Si solid phase epitaxy

International Nuclear Information System (INIS)

Impellizzeri, G.; Mirabella, S.; Romano, L.; Napolitani, E.; Carnera, A.; Grimaldi, M.G.; Priolo, F.

2006-01-01

We have investigated the F incorporation and segregation in preamorphized Si during solid phase epitaxy (SPE) at different temperatures and for several implanted-F energies and fluences. The Si samples were amorphized to a depth of 550 nm by implanting Si at liquid nitrogen temperature and then enriched with F at different energies (65-150 keV) and fluences (0.07-5 x 10 14 F/cm 2 ). Subsequently, the samples were regrown by SPE at different temperatures: 580, 700 and 800 deg. C. We have found that the amount of F incorporated after SPE strongly depends on the SPE temperature and on the energy and fluence of the implanted-F, opening the possibility to tailor the F profile during SPE

Method Development for Efficient Incorporation of Unnatural Amino Acids

KAUST Repository

Harris, Paul D.

2014-04-01

The synthesis of proteins bearing unnatural amino acids has the potential to enhance and elucidate many processes in biochemistry and molecular biology. There are two primary methods for site specific unnatural amino acid incorporation, both of which use the cell’s native protein translating machinery: in vitro chemical acylation of suppressor tRNAs and the use of orthogonal amino acyl tRNA synthetases. Total chemical synthesis is theoretically possible, but current methods severely limit the maximum size of the product protein. In vivo orthogonal synthetase methods suffer from the high cost of the unnatural amino acid. In this thesis I sought to address this limitation by increasing cell density, first in shake flasks and then in a bioreactor in order to increase the yield of protein per amount of unnatural amino acid used. In a parallel project, I used the in vitro chemical acylation system to incorporate several unnatural amino acids, key among them the fluorophore BODIPYFL, with the aim of producing site specifically fluorescently labeled protein for single molecule FRET studies. I demonstrated successful incorporation of these amino acids into the trial protein GFP, although incorporation was not demonstrated in the final target, FEN1. This also served to confirm the effectiveness of a new procedure developed for chemical acylation.

Method Development for Efficient Incorporation of Unnatural Amino Acids

KAUST Repository

Harris, Paul D.

2014-01-01

The synthesis of proteins bearing unnatural amino acids has the potential to enhance and elucidate many processes in biochemistry and molecular biology. There are two primary methods for site specific unnatural amino acid incorporation, both of which use the cell’s native protein translating machinery: in vitro chemical acylation of suppressor tRNAs and the use of orthogonal amino acyl tRNA synthetases. Total chemical synthesis is theoretically possible, but current methods severely limit the maximum size of the product protein. In vivo orthogonal synthetase methods suffer from the high cost of the unnatural amino acid. In this thesis I sought to address this limitation by increasing cell density, first in shake flasks and then in a bioreactor in order to increase the yield of protein per amount of unnatural amino acid used. In a parallel project, I used the in vitro chemical acylation system to incorporate several unnatural amino acids, key among them the fluorophore BODIPYFL, with the aim of producing site specifically fluorescently labeled protein for single molecule FRET studies. I demonstrated successful incorporation of these amino acids into the trial protein GFP, although incorporation was not demonstrated in the final target, FEN1. This also served to confirm the effectiveness of a new procedure developed for chemical acylation.

Incorporation of metal nanoparticles into wood substrate and methods

Science.gov (United States)

Rector, Kirk D; Lucas, Marcel

2015-11-04

Metal nanoparticles were incorporated into wood. Ionic liquids were used to expand the wood cell wall structure for nanoparticle incorporation into the cell wall structure. Nanoparticles of elemental gold or silver were found to be effective surface enhanced Raman spectroscopy (SERS) imaging contrast or sensing agents. Nanoparticles of elemental iron were found to be efficient microwave absorbers and caused localized heating for disrupting the integrity of the lignocellulosic matrix. Controls suggest that the localized heating around the iron nanoparticles reduces losses of cellulose in the form of water, volatiles and CO.sub.2. The ionic liquid is needed during the incorporation process at room temperature. The use of small amounts of ionic liquid combined with the absence of an ionic liquid purification step and a lower energy and water use are expected to reduce costs in an up-scaled pretreatment process.

Eliciting and Defining Requirements Based on Metaevaluation: the Case of the CRAS 2008 Census

Directory of Open Access Journals (Sweden)

Edilson Ferneda

2014-10-01

Full Text Available The Brazilian Ministry of Social Development and Fight against Hunger (MDS regularly promotes the evaluation of its social programs, such as those developed in the Reference Centers for Social Assistance (CRAS. Such evaluations make use of a web system that supports the collection and processing of information as well as the dissemination of its results to local, regional and central government officials through the so-called CRAS Census. A meta-evaluation of the CRAS 2008 Census was carried out based on criteria specified by the Joint Committee (1994, from which we elicited requirements that enabled improvements of the web system. The article reports new requirements elicited from the meta-evaluation of the CRAS 2008 Census, held in the period 2009-2010. The approach of meta-evaluation as an alternative source of requirements elicitation took into consideration results from evaluations of social programs in order to identify system problems without the usual need of intense interaction with users. This approach revealed opportunities for improvements in the evaluation process that led to the elicitation of requirements for the computerized system. Some of the elicited features were incorporated into the Census 2010 and others may be incorporated in future censuses.

Neutron secondary-particle production cross sections and their incorporation into Monte-Carlo transport codes

International Nuclear Information System (INIS)

Brenner, D.J.; Prael, R.E.; Little, R.C.

1987-01-01

Realistic simulations of the passage of fast neutrons through tissue require a large quantity of cross-sectional data. What are needed are differential (in particle type, energy and angle) cross sections. A computer code is described which produces such spectra for neutrons above ∼14 MeV incident on light nuclei such as carbon and oxygen. Comparisons have been made with experimental measurements of double-differential secondary charged-particle production on carbon and oxygen at energies from 27 to 60 MeV; they indicate that the model is adequate in this energy range. In order to utilize fully the results of these calculations, they should be incorporated into a neutron transport code. This requires defining a generalized format for describing charged-particle production, putting the calculated results in this format, interfacing the neutron transport code with these data, and charged-particle transport. The design and development of such a program is described. 13 refs., 3 figs

Fiscal year 1997-1998 waste information requirements document

International Nuclear Information System (INIS)

Poppiti, J.A.

1997-01-01

The Waste Information Requirements Document describes the activities of the Tank Waste Remediation System (TWRS) Characterization Project that provide characterization information on Hanford Site waste tanks. The characterization information is required to perform operations and meet the commitments of TWRS end users. These commitments are derived from the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement; the Recommendation 93-5 Implementation Plan to the Defense Nuclear Facilities Safety Board (DNFSB); and other directives as listed in Section 4.0. This Waste Information Requirement Document applies to Fiscal Years 1997 and 1998 activities. Its contents are based on the best information available in August 1997. The format and content are based on the directions of DOE-RL (Sieracki, 1997) and Fluor Daniel Hanford Incorporated (Umek, 1997). Activities, such as the revision of the Tank Characterization Technical Sampling Basis (Brown et al. 1997), the revision of the data quality objectives (DQOs), issue closures, discussions with Ecology, and management decisions may cause subsequent updates to the Waste Information Requirements Document

Wind Energy Management System Integration Project Incorporating Wind Generation and Load Forecast Uncertainties into Power Grid Operations

Energy Technology Data Exchange (ETDEWEB)

Makarov, Yuri V.; Huang, Zhenyu; Etingov, Pavel V.; Ma, Jian; Guttromson, Ross T.; Subbarao, Krishnappa; Chakrabarti, Bhujanga B.

2010-09-01

The power system balancing process, which includes the scheduling, real time dispatch (load following) and regulation processes, is traditionally based on deterministic models. Since the conventional generation needs time to be committed and dispatched to a desired megawatt level, the scheduling and load following processes use load and wind power production forecasts to achieve future balance between the conventional generation and energy storage on the one side, and system load, intermittent resources (such as wind and solar generation) and scheduled interchange on the other side. Although in real life the forecasting procedures imply some uncertainty around the load and wind forecasts (caused by forecast errors), only their mean values are actually used in the generation dispatch and commitment procedures. Since the actual load and intermittent generation can deviate from their forecasts, it becomes increasingly unclear (especially, with the increasing penetration of renewable resources) whether the system would be actually able to meet the conventional generation requirements within the look-ahead horizon, what the additional balancing efforts would be needed as we get closer to the real time, and what additional costs would be incurred by those needs. In order to improve the system control performance characteristics, maintain system reliability, and minimize expenses related to the system balancing functions, it becomes necessary to incorporate the predicted uncertainty ranges into the scheduling, load following, and, in some extent, into the regulation processes. It is also important to address the uncertainty problem comprehensively, by including all sources of uncertainty (load, intermittent generation, generators’ forced outages, etc.) into consideration. All aspects of uncertainty such as the imbalance size (which is the same as capacity needed to mitigate the imbalance) and generation ramping requirement must be taken into account. The latter unique

A maximum principle for the first-order Boltzmann equation, incorporating a potential treatment of voids

International Nuclear Information System (INIS)

Schofield, S.L.

1988-01-01

Ackroyd's generalized least-squares method for solving the first-order Boltzmann equation is adapted to incorporate a potential treatment of voids. The adaptation comprises a direct least-squares minimization allied with a suitably-defined bilinear functional. The resulting formulation gives rise to a maximum principle whose functional does not contain terms of the type that have previously led to difficulties in treating void regions. The maximum principle is derived without requiring continuity of the flux at interfaces. The functional of the maximum principle is concluded to have an Euler-Lagrange equation given directly by the first-order Boltzmann equation. (author)

Between economic and legal analysis of incorporeal things: A critical

African Journals Online (AJOL)

The author uses practical economic examples to argue for the development of common law. The author identifies relevant Roman law principles which justify the legal nature of incorporeal things. It is demonstrated that the value of incorporeal things depends greatly on future circumstances. It is argued in this article that the ...

The biokinetic of incorporates radionuclides; Die Biokinetik von inkorporierten Radionukliden

Energy Technology Data Exchange (ETDEWEB)

Breustedt, Bastian [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Inst. fuer Strahlenforschung; Giussani, Augusto [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). Arbeitsgruppe ' ' Externe und interne Dosimetrie, Biokinetik' '

2017-08-01

Incorporated radionuclides from nuclear accidents, fission product releases or nuclear medical administration are distributed in the human body in organs and tissue, absorbed 9or excreted. The interpretation of incorporation monitoring results and the estimation of the internal doses that cannot be measured directly need mathematical methods and the formulation of biokinetic models.

Incorporating environmental justice measures during environmental impact statement scoping

International Nuclear Information System (INIS)

Imam, J.; Poles, J.S.

1995-01-01

Executive Order 12898, open-quote Federal Actions to Address Environmental Justice in Minority Populations and Low-Income populations,close-quote directs Federal agencies to make environmental justice part of their mission by involving minorities and low-income populations and by identifying and addressing as appropriate disproportionately high and adverse human health and environmental effects of their programs, policies, and activities on minority and low-income populations. In the Presidential Memorandum transmitting the Executive Order it was stated that environmental justice should be taken into consideration under the National Environmental Policy Act of 1969 (NEPA). NEPA, with its systematic approach and requirements for alternatives analysis and comprehensive public participation, has served as one of the main mechanisms for involving the public in environmental decision-making. This paper addresses challenges faced by the Department of Energy in involving minority and low-income populations in the public involvement activities associated with a national-level environmental impact statement (EIS) and suggests ways to improve agencies' incorporation of environmental justice considerations in NEPA scoping

40 CFR 174.524 - Glyphosate Oxidoreductase GOX or GOXv247 in all plants; exemption from the requirement of a...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Glyphosate Oxidoreductase GOX or... REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and Tolerance Exemptions § 174.524 Glyphosate... Glyphosate Oxidoreductase GOX or GOXv247 enzyme in all plants are exempt from the requirement of a tolerance...

Efficient fuzzy Bayesian inference algorithms for incorporating expert knowledge in parameter estimation

Science.gov (United States)

Rajabi, Mohammad Mahdi; Ataie-Ashtiani, Behzad

2016-05-01

Bayesian inference has traditionally been conceived as the proper framework for the formal incorporation of expert knowledge in parameter estimation of groundwater models. However, conventional Bayesian inference is incapable of taking into account the imprecision essentially embedded in expert provided information. In order to solve this problem, a number of extensions to conventional Bayesian inference have been introduced in recent years. One of these extensions is 'fuzzy Bayesian inference' which is the result of integrating fuzzy techniques into Bayesian statistics. Fuzzy Bayesian inference has a number of desirable features which makes it an attractive approach for incorporating expert knowledge in the parameter estimation process of groundwater models: (1) it is well adapted to the nature of expert provided information, (2) it allows to distinguishably model both uncertainty and imprecision, and (3) it presents a framework for fusing expert provided information regarding the various inputs of the Bayesian inference algorithm. However an important obstacle in employing fuzzy Bayesian inference in groundwater numerical modeling applications is the computational burden, as the required number of numerical model simulations often becomes extremely exhaustive and often computationally infeasible. In this paper, a novel approach of accelerating the fuzzy Bayesian inference algorithm is proposed which is based on using approximate posterior distributions derived from surrogate modeling, as a screening tool in the computations. The proposed approach is first applied to a synthetic test case of seawater intrusion (SWI) in a coastal aquifer. It is shown that for this synthetic test case, the proposed approach decreases the number of required numerical simulations by an order of magnitude. Then the proposed approach is applied to a real-world test case involving three-dimensional numerical modeling of SWI in Kish Island, located in the Persian Gulf. An expert

Isotopic incorporation rates and discrimination factors in mantis shrimp crustaceans.

Directory of Open Access Journals (Sweden)

Maya S deVries

Full Text Available Stable isotope analysis has provided insights into the trophic ecology of a wide diversity of animals. Knowledge about isotopic incorporation rates and isotopic discrimination between the consumer and its diet for different tissue types is essential for interpreting stable isotope data, but these parameters remain understudied in many animal taxa and particularly in aquatic invertebrates. We performed a 292-day diet shift experiment on 92 individuals of the predatory mantis shrimp, Neogonodactylus bredini, to quantify carbon and nitrogen incorporation rates and isotope discrimination factors in muscle and hemolymph tissues. Average isotopic discrimination factors between mantis shrimp muscle and the new diet were 3.0 ± 0.6 ‰ and 0.9 ± 0.3 ‰ for carbon and nitrogen, respectively, which is contrary to what is seen in many other animals (e.g. C and N discrimination is generally 0-1 ‰ and 3-4 ‰, respectively. Surprisingly, the average residence time of nitrogen in hemolymph (28.9 ± 8.3 days was over 8 times longer than that of carbon (3.4 ± 1.4 days. In muscle, the average residence times of carbon and nitrogen were of the same magnitude (89.3 ± 44.4 and 72.8 ± 18.8 days, respectively. We compared the mantis shrimps' incorporation rates, along with rates from four other invertebrate taxa from the literature, to those predicted by an allometric equation relating carbon incorporation rate to body mass that was developed for teleost fishes and sharks. The rate of carbon incorporation into muscle was consistent with rates predicted by this equation. Our findings provide new insight into isotopic discrimination factors and incorporation rates in invertebrates with the former showing a different trend than what is commonly observed in other animals.

Formulation of Bioadhesive Carbomer Gel Incorporating Drug ...

African Journals Online (AJOL)

incorporated into carbomer gel and evaluated for drug release. Results: ... localized delivery system for the treatment inflammation and infection in periodontal pockets. ..... loaded with diclofenac sodium for intra- articular administration. J Drug ...

In vitro incorporation of the phage Phi29 connector complex

International Nuclear Information System (INIS)

Fu Chiyu; Prevelige, Peter E.

2009-01-01

The incorporation of the DNA packaging connector complex during lambdoid phage assembly in vivo is strictly controlled-one and only one of the twelve identical icosahedral vertices is differentiated by the inclusion of a portal or connector dodecamer. Proposed control mechanisms include obligate nucleation from a connector containing complex, addition of the connector as the final step during assembly, and a connector-mediated increase in the growth rate. The inability to recapitulate connector incorporation in vitro has made it difficult to obtain direct biochemical evidence in support of one model over another. Here we report the development an in vitro assembly system for the well characterized dsDNA phage Phi29 which results in the co-assembly of connector with capsid and scaffolding proteins to form procapsid-like particles (PLPs). Immuno-electron microscopy demonstrates the specific incorporation of connector vertex in PLPs. The connector protein increases both the yield and the rate of capsid assembly suggesting that the incorporation of the connector in Phi29 likely promotes nucleation of assembly.

Leachability of fired clay brick incorporating with sewage sludge waste

Science.gov (United States)

Kadir, Aeslina Abdul; Salim, Nurul Salhana Abdul; Sarani, Noor Amira; Rahmat, Nur Aqma Izurin; Abdullah, Mohd Mustafa Al Bakri

2017-09-01

Sewage sludge is sewerage from wastewater treatment plants that generates millions tons of sludge ever year. Regarding this activity, it causes lack management of waste which is harmful to the surrounding conditions. Therefore, this study is focuses on the incorporation of sewage sludge waste into fired clay brick to provide an option of disposal method, producing adequate quality of brick as well as limiting the heavy metal leachability to the environment. Sewage sludge brick (SSB) mixtures were incorporated with 0%, 1%, 5%, 10%, 20% and 30% of sewage sludge waste (SSW). Heavy metals of crushed SSB were determined by using Toxicity Characteristic Leaching Procedure (TCLP) according to Method 1311 of United State Environment Protection Agency (USEPA) standard. From the results obtained, up to 20% of SSW could be incorporated into fired clay brick and comply with the USEPA standard. Therefore, this study revealed that by incorporating SSW into fired clay brick it could be an alternative method to dispose the SSW and also could act as a replacement material for brick manufacturing with appropriate mix and design.

Geolocating thermal binoculars based on a software defined camera core incorporating HOT MCT grown by MOVPE

Science.gov (United States)

Pillans, Luke; Harmer, Jack; Edwards, Tim; Richardson, Lee

2016-05-01

Geolocation is the process of calculating a target position based on bearing and range relative to the known location of the observer. A high performance thermal imager with integrated geolocation functions is a powerful long range targeting device. Firefly is a software defined camera core incorporating a system-on-a-chip processor running the AndroidTM operating system. The processor has a range of industry standard serial interfaces which were used to interface to peripheral devices including a laser rangefinder and a digital magnetic compass. The core has built in Global Positioning System (GPS) which provides the third variable required for geolocation. The graphical capability of Firefly allowed flexibility in the design of the man-machine interface (MMI), so the finished system can give access to extensive functionality without appearing cumbersome or over-complicated to the user. This paper covers both the hardware and software design of the system, including how the camera core influenced the selection of peripheral hardware, and the MMI design process which incorporated user feedback at various stages.

Reliability assessment of power pole infrastructure incorporating deterioration and network maintenance

International Nuclear Information System (INIS)

Ryan, Paraic C.; Stewart, Mark G.; Spencer, Nathan; Li, Yue

2014-01-01

There is considerable investment in timber utility poles worldwide, and there is a need to examine the structural reliability and probability based management optimisation of these power distribution infrastructure elements. The work presented in this paper builds on the existing studies in this area through assessment of both treated and untreated timber power poles, with the effects of deterioration and network maintenance incorporated in the analysis. This more realistic assessment approach, with deterioration and maintenance considered, was achieved using event-based Monte Carlo simulation. The output from the probabilistic model is used to illustrate the importance of considering network maintenance in the time-dependent structural reliability assessment of timber power poles. Under wind load, treated and untreated poles designed and maintained in accordance with existing Australian standards were found to have similar failure rates. However, untreated pole networks required approximately twice as many maintenance based pole replacements to sustain the same level of reliability. The effect of four different network maintenance strategies on infrastructure performance was also investigated herein. This assessment highlighted the fact that slight alterations to network maintenance practices can lead to significant changes in performance of timber power pole networks. - Highlights: • A time-dependent structural reliability model was developed for timber power poles. • Deterioration and network maintenance were incorporated into this event based model. • Network maintenance had a significant impact on power pole wind vulnerability. • Treated and untreated poles designed to Australian standards had similar reliability. • Minor alterations to maintenance strategies had large effects on network performance

Incorporating the life course model into MCH nutrition leadership education and training programs.

Science.gov (United States)

Haughton, Betsy; Eppig, Kristen; Looney, Shannon M; Cunningham-Sabo, Leslie; Spear, Bonnie A; Spence, Marsha; Stang, Jamie S

2013-01-01

Life course perspective, social determinants of health, and health equity have been combined into one comprehensive model, the life course model (LCM), for strategic planning by US Health Resources and Services Administration's Maternal and Child Health Bureau. The purpose of this project was to describe a faculty development process; identify strategies for incorporation of the LCM into nutrition leadership education and training at the graduate and professional levels; and suggest broader implications for training, research, and practice. Nineteen representatives from 6 MCHB-funded nutrition leadership education and training programs and 10 federal partners participated in a one-day session that began with an overview of the models and concluded with guided small group discussions on how to incorporate them into maternal and child health (MCH) leadership training using obesity as an example. Written notes from group discussions were compiled and coded emergently. Content analysis determined the most salient themes about incorporating the models into training. Four major LCM-related themes emerged, three of which were about training: (1) incorporation by training grants through LCM-framed coursework and experiences for trainees, and similarly framed continuing education and skills development for professionals; (2) incorporation through collaboration with other training programs and state and community partners, and through advocacy; and (3) incorporation by others at the federal and local levels through policy, political, and prevention efforts. The fourth theme focused on anticipated challenges of incorporating the model in training. Multiple methods for incorporating the LCM into MCH training and practice are warranted. Challenges to incorporating include the need for research and related policy development.

International network on incorporation of ageing effects into PSA

International Nuclear Information System (INIS)

Kirchsteiger, C.; Patrik, M.

2006-01-01

This paper describes the background and status of a new International Network on ''Incorporating Ageing Effects into Probabilistic Safety Assessment''. The Joint Research Centre (JRC) of the European Commission organized in September 2004 the kickoff meeting of this Network at JRC's Institute for Energy in Petten, Netherlands, with the aims to open the APSA Network, to start discussion of ageing issues in relation to incorporating ageing effects into PSA tools and to come to consensus on objectives and work packages of the Network, taking into account the specific expectations of potential Network partners. The presentations and discussions at the meeting confirmed the main conclusion from the previously organized PSAM 7 pre-conference workshop on ''Incorporating PSA into Ageing Management'', Budapest, June 2004, namely that incorporating ageing effects into PSA seems to be more and more a hot topic particularly for risk assessment and ageing management of nuclear power plants operating at advanced age (more than 25-30 years) and for the purpose of plant life extension. However, it also appeared that, especially regarding the situation in Europe, at present there are several on-going feasibility or full studies in this area, but not yet a completed Ageing PSA leading to applications. The project's working method is a NETWORK of operators, industry, research, academia and consultants with an active interest in the area (physical networking via a series of workshops and virtual networking via the Internet). The resulting knowledge should help PSA developers and users to incorporate the effects of equipment ageing into current PSA tools and models, to identify and/or develop most effective corresponding methods, to focus on dominant ageing contributors and components and to promote the use of PSA for ageing management of Nuclear Power Plants. (orig.)

Down the slippery slop: Utility incorporation of environmental externalities

International Nuclear Information System (INIS)

Vandenberg, A.J.; Tempchin, R.S.; Mitnick, S.A.; Harron, A.L.

1993-01-01

Advocates of incorporating environmental externalities in electric utility decision-making have concentrated on new electric generating resources, with some success. Such public utility commission actions compel utilities to consider, explicitly, the cost of sulfur dioxide, carbon dioxide, nitrogen oxides and other emission of power-plants when comparing the economics of new generating resources with those of other resource options (e.g., demand-side management and gas-fired non-utility generator projects). This paper summarizes a study which estimated costs of incorporating externalities in utility system operations. We also present an analysis of the Tellus work in this area, and contrast Tellus' methodology, assumptions and results with our own. Estimates of the cost of incorporating externalities in system operations is rather large, in terms of the increased fuel and purchased power cost that ratepayers would have to bear. For the eight cases we examined, the incorporation of externalities caused fuel and purchased power cost to be 9.3 to 69.5 percent higher, relative to what it would have been under traditional generating unit commitment and dispatch. Furthermore, we believe that these estimates of fuel and purchased power cost increases are conservative. In particular, because our analyses focused on utility system operations in 1995, the key assumption about the fuel cost differential (i.e., coal versus natural gas) probably underestimates the differential in later years, significantly, when virtually all forecasters foresee faster cost escalation rates for gas. In general, the higher the fuel cost differential, the faster cost escalation rates for gas. In general, the higher the fuel cost differential, the greater the cost of an externality policy. Unless the record is set straight soon, the idea that incorporating externalities is virtually costless will further spread in the regulatory community and among government policy-makers

77 FR 12284 - Access to Confidential Business Information; Protection Strategies Incorporated

Science.gov (United States)

2012-02-29

... Business Information; Protection Strategies Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA has authorized its contractor, Protection Strategies Incorporated (PSI) of... Business Information (CBI). DATES: Access to the confidential data occurred on or about February 16, 2012...

Open gas exchange system for simultaneous determination of the apparent CO2 assimilation by means of URAS technique and incorporation of 14C into plants

International Nuclear Information System (INIS)

Schumann, F.; Merbach, W.; Freye, E.; Schilling, G.

1988-01-01

Apparent CO 2 assimilation and 14 C incorporation into intact plants (Hordeum distichon L., Beta vulgaris L., and Vicia faba L.) were simultaneously measured on the same leaf, using a simple combination of the URAS technique (infrared absorption recorder) and 14 CO 2 fumigation in an open system. As a result of 14 C discrimination during the CO 2 incorporation and respiration losses during harvest and post-harvest treatment, the 14 C method gave always lower CO 2 assimilation values (by 17 to 25%) than the URAS technique. Nevertheless, the results obtained by both methods were closely correlated. Therefore, for quantifying the assimilated CO 2 properly and simultaneously tracing the assimilates synthesized from CO 2 , it is not sufficient to measure solely 14 C incorporation, but to combine both techniques. The system presented is qualified to meet these requirements. (author)

Determination of rumen microbial growth in vitro form 32P-labelled phosphate incorporation

International Nuclear Information System (INIS)

Nevel, C.J. Van; Demeyer, D.I.

1977-01-01

The extracellular phosphate pool in incubations of rumen fluid or washed cell suspensions of mixed rumen bacteria (WCS) was labelled with 32 P. From the constant extracellular phosphate pool specific activity and the amount of radioactivity incorporated during incubation, the amount of P incorporated in the microbial fraction was calculated. From the value for nitrogen: P determined in microbial matter, the amount of N incorporated was calculated as a measure of microbial growth. Incorporation of soluble non-protein-N in incubations devoid of substrate protein was 50 and 80% of the values obtained using isotope method for rumen fluid and WCS respectively. Incorporation of 32 P in P-containing microbial components (mainly nucleic acids) was compared with net synthesis of these components in incubations of WCS. When N incorporation, calculated from results obtained using isotope method in incubations with rumen fluid, was compared with the amount of carbohydrate substrate fermented and the type of fermentation, values between 18.3 and 44.6 g N incorporated kg of organic matter fermented were obtained. The use of isotopes for determination of rumen microbial growth in vitro is critically discussed. (author)

40 CFR 174.530 - Bacillus thuringiensis Cry2Ae protein in cotton; temporary exemption from the requirement of a...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry2Ae protein in cotton; temporary exemption from the requirement of a tolerance. 174.530 Section 174.530 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS...

KRYPTON INCORPORATION IN SPUTTERED SILICON FILMS

NARCIS (Netherlands)

GREUTER, MJW; NIESEN, L; HAKVOORT, RA; DEROODE, J; VANVEEN, A; BERNTSEN, AJM; SLOOF, WG

1993-01-01

The incorporation of Kr in sputtered a-Si films has been investigated in a systematic way by varying the Kr to Si flux, yielding Kr concentrations up to 5 at %. Compositions were determined with X-ray microanalysis. A model has been applied to describe the composition of the growing film. The layers

Work plan for the radiological survey for the David Witherspoon, Incorporated, Landfill-1630 site, Knoxville, Tennessee

International Nuclear Information System (INIS)

1996-07-01

This work plan establishes the methods and requirements for performing a radiological survey at the David Witherspoon, Incorporated, Landfill-1630 Site, Knoxville, Tennessee (DWI 1630 Site) in accordance with requirements under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The radiological survey will identify the radiological contamination level of the equipment and debris stored at the DWI 1630 Site. The data generated from the survey activities will support the decisions for characterization of the equipment/debris and aid in subsequent disposition and waste handling. The survey activities to be performed under this work plan include an equipment radiological survey, a walkover survey, and an immunoassay testing for polychlorinated biphenyls (PCBs). This work plan includes a quality assurance (QA)/quality control (QC) project plan, a health and safety (H ampersand S) plan, and a waste management plan

Legal and Ethical Issues around Incorporating Traditional Knowledge in Polar Data Infrastructures

Directory of Open Access Journals (Sweden)

Teresa Scassa

2017-02-01

Full Text Available Human knowledge of the polar region is a unique blend of Western scientific knowledge and local and indigenous knowledge. It is increasingly recognized that to exclude Traditional Knowledge from repositories of polar data would both limit the value of such repositories and perpetuate colonial legacies of exclusion and exploitation. However, the inclusion of Traditional Knowledge within repositories that are conceived and designed for Western scientific knowledge raises its own unique challenges. There is increasing acceptance of the need to make these two knowledge systems interoperable but in addition to the technical challenge there are legal and ethical issues involved. These relate to ‘ownership’ or custodianship of the knowledge; obtaining appropriate consent to gather, use and incorporate this knowledge; being sensitive to potentially different norms regarding access to and sharing of some types of knowledge; and appropriate acknowledgement for data contributors. In some cases, respectful incorporation of Traditional Knowledge may challenge standard conceptions regarding the sharing of data, including through open data licensing. These issues have not been fully addressed in the existing literature on legal interoperability which does not adequately deal with Traditional Knowledge. In this paper we identify legal and ethical norms regarding the use of Traditional Knowledge and explore their application in the particular context of polar data. Drawing upon our earlier work on cybercartography and Traditional Knowledge we identify the elements required in the development of a framework for the inclusion of Traditional Knowledge within data infrastructures.

Influence of incorporated radionuclides on the life span of Drosophila melanogaster

International Nuclear Information System (INIS)

Koshel', N.M.; Vajserman, O.M.; Vojtenko, V.P.; Kutlakhmedov, Yu.O.; Mikhjejev, O.M.

2004-01-01

Influence of incorporated radionuclides ( 137 Cs and 90 Sr) on the life span of Drosophila melanogaster was studied. External irradiation modified the formation of cumulative dose of incorporated radionuclides. All influences leaded to significant (p 90 Sr was higher comparing to 137 Cs

Analysis of 5-iodo-2'-deoxyuridine incorporation in murine melanoma for photon activation therapy

International Nuclear Information System (INIS)

Popenoe, E.A.; Commerford, S.L.; Fairchild, R.G.; Laster, B.H.; Stony Brook University Hospital, New York; Wielopolski, L.; Meek, A.; Gahbauer, R.; Goodman, J.

1990-01-01

Quantitative evaluation of the dose enhancement obtained with analog nucleoside agents such as iododeoxyuridine (IdUrd) requires knowledge of the degree to which the thymidine (Thd) in DNA is replaced by IdUrd. In this investigation, mice were infused wit IdUrd using an intravenous infusion apparatus capable of delivering continuous multi-day infusions without restraining the mice. The absolute incorporation of IdUrd in DNA was measured by 125 IdUrd label, both in whole tissue and extracted DNA, showing a good correlation between levels observed in DNA and whole tissue. Replacement in a Harding-Passey murine melanoma tumor carried in BALB/c mice approached 10 per cent. In addition, a Neutron Activation Analysis (NAA) technique was developed which showed in vitro, a sensitivity sufficient to evaluate the percentage of replacement of Thd by IdUrd in small biological samples with a sensitivity greater than 0.1 ppm, at 1 per cent replacement in mg samples. This method can provide information on iodine substitution in DNA in humans where the use of a radioactive DNA-seeking substance would be undesirable. Analyses of IdUrd incorporation in cultured cells by NAA and 125 I counting showed good agreement. (author). 21 refs.; 2 figs.; 5 tabs

29 CFR 1917.3 - Incorporation by reference.

Science.gov (United States)

2010-07-01

... incorporated by reference in this part, have the same force and effect as other standards in this part. Only... Administration (OSHA), or at the OSHA Docket Office, U.S. Department of Labor, 200 Constitution Avenue, NW., Room...

Measurement of the incorporation rates of four amino acids into proteins for estimating bacterial production.

Science.gov (United States)

Servais, P

1995-03-01

In aquatic ecosystems, [(3)H]thymidine incorporation into bacterial DNA and [(3)H]leucine incorporation into proteins are usually used to estimate bacterial production. The incorporation rates of four amino acids (leucine, tyrosine, lysine, alanine) into proteins of bacteria were measured in parallel on natural freshwater samples from the basin of the river Meuse (Belgium). Comparison of the incorporation into proteins and into the total macromolecular fraction showed that these different amino acids were incorporated at more than 90% into proteins. From incorporation measurements at four subsaturated concentrations (range, 2-77 nm), the maximum incorporation rates were determined. Strong correlations (r > 0.91 for all the calculated correlations) were found between the maximum incorporation rates of the different tested amino acids over a range of two orders of magnitude of bacterial activity. Bacterial production estimates were calculated using theoretical and experimental conversion factors. The productions calculated from the incorporation rates of the four amino acids were in good concordance, especially when the experimental conversion factors were used (slope range, 0.91-1.11, and r > 0.91). This study suggests that the incorporation of various amino acids into proteins can be used to estimate bacterial production.

Guidelines for the Deployment of Product-Related Environmental Legislation into Requirements for the Product Development Process

DEFF Research Database (Denmark)

Ferraz, Mariana; Pigosso, Daniela Cristina Antelmi; Teixeira, Cláudia Echevenguá

2013-01-01

Environmental legislation is increasingly changing its focus from end-of-pipe approaches to a life cycle perspective. Therefore, manufacturing companies are increasingly identifying the need of deploying and incorporating product-related environmental requirements into the product development...... process. This paper presents twelve guidelines, clustered into three groups, to support companies in the identification, analysis and deployment of product requirements from product-related environmental legislation....

40 CFR 174.504 - Bacillus thuringiensis Cry1F protein in cotton; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry1F protein in cotton; exemption from the requirement of a tolerance. 174.504 Section 174.504 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and...

40 CFR 174.517 - Bacillus thuringiensis Cry9C protein in corn; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry9C protein in corn; exemption from the requirement of a tolerance. 174.517 Section 174.517 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and...

40 CFR 174.520 - Bacillus thuringiensis Cry1F protein in corn; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry1F protein in corn; exemption from the requirement of a tolerance. 174.520 Section 174.520 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and...

Review of nuclear piping seismic design requirements

International Nuclear Information System (INIS)

Slagis, G.C.; Moore, S.E.

1994-01-01

Modern-day nuclear plant piping systems are designed with a large number of seismic supports and snubbers that may be detrimental to plant reliability. Experimental tests have demonstrated the inherent ruggedness of ductile steel piping for seismic loading. Present methods to predict seismic loads on piping are based on linear-elastic analysis methods with low damping. These methods overpredict the seismic response of ductile steel pipe. Section III of the ASME Boiler and Pressure Vessel Code stresses limits for piping systems that are based on considerations of static loads and hence are overly conservative. Appropriate stress limits for seismic loads on piping should be incorporated into the code to allow more flexible piping designs. The existing requirements and methods for seismic design of piping systems, including inherent conservations, are explained to provide a technical foundation for modifications to those requirements. 30 refs., 5 figs., 3 tabs

Direct incorporation of guanosine 5'-diphosphate into microtubules without guanosine 5'-triphosphate hydrolysis

International Nuclear Information System (INIS)

Hamel, E.; Batra, J.K.; Lin, C.M.

1986-01-01

Using highly purified calf brain tubulin bearing [8- 14 C]guanosine 5'-diphosphate (GDP) in the exchangeable nucleotide site and heat-treated microtubule-associated proteins, the authors have found that a significant proportion of exchangeable-site GDP in microtubules can be incorporated directly during guanosine 5'-triphosphate (GTP) dependent polymerization of tubulin, without an initial exchange of GDP for GTP and subsequent GTP hydrolysis during assembly. The precise amount of GDP incorporated directly into microtubules is highly dependent on specific reaction conditions, being favored by high tubulin concentrations, low GTP and Mg 2+ concentrations, and exogenous GDP in the reaction mixture. Minimum effects were observed with changes in reaction pH or temperature, changes in concentration of microtubule-associated proteins, alteration of the sulfonate buffer, or the presence of a calcium chelator in the reaction mixture. Under conditions most favorable for direct GDP incorporation, about one-third of the GDP in microtubules is incorporated directly (without GTP hydrolysis) and two-thirds is incorporated hydrolytically (as a consequence of GTP hydrolysis). Direct incorporation of GDP occurs in a constant proportion throughout elongation, and the amount of direct incorporation probably reflects the rapid equilibration of GDP and GTP at the exchangeable site that occurs before the onset of assembly

Radwaste disposal by incorporation in matrix

International Nuclear Information System (INIS)

Curtiss, D.H.; Heacock, H.W.

1976-01-01

A process of safe disposal, handling, or storae of radwaste associated with nuclear power productin is described. A feature of the invention is to incorporate the radwaste in a hardenable, matrix-forming mass employing a cement-type binding agent to which alkali or alkaline-earth silicate is added, among other things, to increase liquid absorption. 9 claims

Light Intensity Regulates LC-PUFA Incorporation into Lipids of Pavlova lutheri and the Final Desaturase and Elongase Activities Involved in Their Biosynthesis.

Science.gov (United States)

Guihéneuf, Freddy; Mimouni, Virginie; Tremblin, Gérard; Ulmann, Lionel

2015-02-04

The microalga Pavlova lutheri is a candidate for the production of omega-3 long-chain polyunsaturated fatty acid (LC-PUFA), due to its ability to accumulate both eicosapentaenoic (EPA) and docosahexaenoic acids. Outstanding questions need to be solved to understand the complexity of n-3 LC-PUFA synthesis and partitioning into lipids, especially its metabolic regulation, and which enzymes and/or abiotic factors control their biosynthesis. In this study, the radioactivity of 14 C-labeled arachidonic acid incorporated into the total lipids of P. lutheri grown under different light intensities and its conversion into labeled LC-PUFA were monitored. The results highlighted for the first time the light-dependent incorporation of LC-PUFA into lipids and the light-dependent activity of the final desaturation and elongation steps required to synthesize and accumulate n-3 C20/C22 LC-PUFA. The incorporation of arachidonic acid into lipids under low light and the related Δ17-desaturation activity measured explain the variations in fatty acid profile of P. lutheri, especially the accumulation of n-3 LC-PUFA such as EPA under low light conditions.

49 CFR 193.2013 - Incorporation by reference.

Science.gov (United States)

2010-10-01

... MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL... incorporated materials are available for inspection in the Pipeline and Hazardous Materials Safety... referenced material 49 CFR Reference A. American Gas Association (AGA): (1) “Purging Principles and Practices...

7 CFR 1755.901 - Incorporation by Reference.

Science.gov (United States)

2010-01-01

...”), incorporation by reference approved for § 1755.902(h). (e) The following Telecommunications Industry Association... AGRICULTURE TELECOMMUNICATIONS POLICIES ON SPECIFICATIONS, ACCEPTABLE MATERIALS, AND STANDARD CONTRACT FORMS... Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable, approved March 10...

Development of procedural requirements for life extension of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Hun; Son, Moon Kyu [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Ham, Cheol Hun [The Catholic University of Korea, Seoul (Korea, Republic of); Chang, Keun Sun [Sunmoon Univ., Asan (Korea, Republic of); Paek, Won Phil [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Cheong, Ji Hwan [Baekseok College Cultural Studies, Cheonan (Korea, Republic of)

2001-03-15

Current status of regulatory aspects of life extension and upgrading of NPPs is reviewed for major foreign countries. Most countries require similar technical requirements; however, procedural aspects differ country by country. Regulatory systems suitable for NPP life extension is investigated. The procedure and requirements for reassessment of design life should be established first; then it can be incorporated into the PSR system. The concept of 'Current Licensing Basis (CLB)' can be adopted in Korea, but further elaboration for terms and definitions is needed for common understanding between interested groups. The procedure for maintenance and backfitting should also be improved. The Systems, Structures, and Components (SSCs) that require development of regulatory requirements for life extension are identified based on extensive analysis of foreign experiences. By analyzing the rules and regulations related to life extension. Basic directions are suggested to harmonize or establish regulatory systems for life extension, two-step licensing, PSR, and backfitting.

Incorporation monitoring during handling of medically used radionuclides; Inkorporationsueberwachung beim Umgang mit medizinisch genutzten Radionukliden

Energy Technology Data Exchange (ETDEWEB)

Buchholz, Werner; Gerstmann, Udo [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). FB Strahlenschutz und Gesundheit; Scholl, Clemens [Landesinstitut fuer Arbeitsgestaltung NRW, Duesseldorf (Germany). Inkorporationsmessstelle; Wanke, Carsten [Medizinische Hochschule Hannover (Germany). Strahlenschutz und Medizinische Physik

2017-08-01

The necessity of incorporation monitoring in nuclear medicine is dependent of the incorporation factor. For important applications, such as Tc-99m diagnostics and the radioiodine therapy specific measuring programs allow the determination of the incorporation factor. These factors are usually marginal so that a periodic monitoring is either not necessary or replaced by simple threshold measurements. Experiences of incorporation measuring stations show that incorporation might occur but does not induce significant doses.

Incorporating Geoethics in Introductory Earth System Science Courses

Science.gov (United States)

Schmitt, J.

2014-12-01

The integrative nature of Earth System Science courses provides extensive opportunities to introduce students to geoethical inquiry focused on globally significant societal issues. Geoscience education has traditionally lagged in its efforts to increase student awareness of the significance of geologic knowledge to understanding and responsibly confronting causes and possible solutions for emergent, newly emerging, and future problems of anthropogenic cause and consequence. Developing an understanding of the human impact on the earth system requires early (lower division) and for geoscience majors, repeated (upper division) curricular emphasis on the interactions of the lithosphere, hydrosphere, atmosphere, biosphere, and pedosphere across space and through time. Capturing the interest of university students in globally relevant earth system issues and their ethical dimensions while first learning about the earth system is an important initial step in bringing geoethical deliberation and awareness to the next generation of geoscientists. Development of a new introductory Earth System Science course replacing a traditional introductory Physical Geology course at Montana State University has involved abandonment of concept-based content organization in favor of a place-based approach incorporating examination of the complex interactions of earth system components and emergent issues and dilemmas deriving from the unique component interactions that characterize each locale. Thirteen different place-based week-long modules (using web- and classroom-based instruction) were developed to ensure cumulative broad coverage across the earth geographically and earth system components conceptually. Each place-based instructional module contains content of societal relevance requiring synthesis, critical evaluation, and reflection by students. Examples include making linkages between deforestation driven by economics and increased seismicity in Haiti, agriculture and development

Mg Incorporation Efficiency in Pulsed MOCVD of N-Polar GaN:Mg

Science.gov (United States)

Marini, Jonathan; Mahaboob, Isra; Hogan, Kasey; Novak, Steve; Bell, L. D.; Shahedipour-Sandvik, F.

2017-10-01

We report on the effect of growth polarity and pulsed or δ -doped growth mode on impurity incorporation in metalorganic chemical vapor deposition-grown GaN. In Ga-polar orientation, up to 12× enhancement in Mg concentration for given Mg flow rate is observed, resulting in enhanced p-type conductivity for these samples. In contrast, this enhancement effect is greatly diminished for N-polar samples, falling off with increasing Mg flow and showing maximum enhancement of 2.7× at 30 nmol/min Mg flow. At higher Mg flow rates, Mg incorporation at normal levels did not correspond to p-type conductivity, which may be due to Mg incorporation at nonacceptor sites. Concentrations of C, O, and Si were also investigated, revealing dependence on Mg flow in N-polar pulsed samples. Carbon incorporation was found to decrease with increasing Mg flow, and oxygen incorporation was found to remain high across varied Mg flow. These effects combine to result in N-polar samples that are not p-type when using the pulsed growth mode.

27 CFR 31.102 - Addition of partners or incorporation of partnership.

Science.gov (United States)

2010-04-01

... incorporation of partnership. 31.102 Section 31.102 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Partnerships § 31.102 Addition of partners or incorporation of partnership. Where a number of persons who have filed a...

Emerging investigator series: As( v ) in magnetite: incorporation and redistribution

Energy Technology Data Exchange (ETDEWEB)

Huhmann, Brittany L. [Department of Civil and Environmental Engineering; University of Iowa; Iowa City; USA; Neumann, Anke [School of Engineering; Newcastle University; Newcastle upon Tyne; UK; Boyanov, Maxim I. [Biosciences Division; Argonne National Laboratory; Argonne; USA; Institute of Chemical Engineering; Kemner, Kenneth M. [Biosciences Division; Argonne National Laboratory; Argonne; USA; Scherer, Michelle M. [Department of Civil and Environmental Engineering; University of Iowa; Iowa City; USA

2017-01-01

As coprecipitated with magnetite remained incorporated over time whereas sorbed As was redistributed and became increasingly incorporated into magnetite, both the absence and presence of aqueous Fe(ii).

Rationally evolving tRNAPyl for efficient incorporation of noncanonical amino acids.

Science.gov (United States)

Fan, Chenguang; Xiong, Hai; Reynolds, Noah M; Söll, Dieter

2015-12-15

Genetic encoding of noncanonical amino acids (ncAAs) into proteins is a powerful approach to study protein functions. Pyrrolysyl-tRNA synthetase (PylRS), a polyspecific aminoacyl-tRNA synthetase in wide use, has facilitated incorporation of a large number of different ncAAs into proteins to date. To make this process more efficient, we rationally evolved tRNA(Pyl) to create tRNA(Pyl-opt) with six nucleotide changes. This improved tRNA was tested as substrate for wild-type PylRS as well as three characterized PylRS variants (N(ϵ)-acetyllysyl-tRNA synthetase [AcKRS], 3-iodo-phenylalanyl-tRNA synthetase [IFRS], a broad specific PylRS variant [PylRS-AA]) to incorporate ncAAs at UAG codons in super-folder green fluorescence protein (sfGFP). tRNA(Pyl-opt) facilitated a 5-fold increase in AcK incorporation into two positions of sfGFP simultaneously. In addition, AcK incorporation into two target proteins (Escherichia coli malate dehydrogenase and human histone H3) caused homogenous acetylation at multiple lysine residues in high yield. Using tRNA(Pyl-opt) with PylRS and various PylRS variants facilitated efficient incorporation of six other ncAAs into sfGFP. Kinetic analyses revealed that the mutations in tRNA(Pyl-opt) had no significant effect on the catalytic efficiency and substrate binding of PylRS enzymes. Thus tRNA(Pyl-opt) should be an excellent replacement of wild-type tRNA(Pyl) for future ncAA incorporation by PylRS enzymes. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Optical characterization of magnesium incorporation in p-GaN layers for core–shell nanorod light-emitting diodes

Science.gov (United States)

Gîrgel, I.; Šatka, A.; Priesol, J.; Coulon, P.-M.; Le Boulbar, E. D.; Batten, T.; Allsopp, D. W. E.; Shields, P. A.

2018-04-01

III-nitride nanostructures are of interest for a new generation of light-emitting diodes (LEDs). However, the characterization of doping incorporation in nanorod (NR) structures, which is essential for creating the p-n junction diodes, is extremely challenging. This is because the established electrical measurement techniques (such as capacitance–voltage or Hall-effect methods) require a simple sample geometry and reliable ohmic contacts, both of which are difficult to achieve in nanoscale devices. The need for homogenous, conformal n-type or p-type layers in core–shell nanostructures magnifies these challenges. Consequently, we demonstrate how a combination of non-contact methods (micro-photoluminescence, micro-Raman and cathodoluminescence), as well as electron-beam-induced-current, can be used to analyze the uniformity of magnesium incorporation in core–shell NRs and make a first estimate of doping levels by the evolution of band transitions, strain and current mapping. These techniques have been used to optimize the growth of core–shell nanostructures for electrical carrier injection, a significant milestone for their use in LEDs.

In vivo incorporation of labeled fatty acids in rat liver lipids after oral administration

International Nuclear Information System (INIS)

Leyton, J.; Drury, P.J.; Crawford, M.A.

1987-01-01

Striking differences were found in the compartmentalization of fatty acids into liver lipid fractions. The saturated fatty acids--lauric, myristic, palmitic and stearic--were incorporated into phosphoglycerides at faster rates with increasing chain lengths, while triglyceride incorporation was almost uniform. The degree of incorporation of the unsaturated fatty acids into phosphoglycerides (structural) compared to triglyceride (storage and energy) was the converse of their oxidation rates. The incorporation of oleic, linoleic and alpha-linolenic acids was mainly into triglyceride, whereas dihomo-gamma-linolenic acid and arachidonic acid were preferentially incorporated into phosphoglycerides. The data suggest that distribution of each fatty acid is different depending on its destination for structural or energy function

Incorporation of T4 bacteriophage in electrospun fibres.

Science.gov (United States)

Korehei, R; Kadla, J

2013-05-01

Antibacterial food packaging materials, such as bacteriophage-activated electrospun fibrous mats, may address concerns triggered by waves of bacterial food contamination. To address this, we investigated several efficient methods for incorporating T4 bacteriophage into electrospun fibrous mats. The incorporation of T4 bacteriophage using simple suspension electrospinning led to more than five orders of magnitude decrease in bacteriophage activity. To better maintain bacteriophage viability, emulsion electrospinning was developed where the T4 bacteriophage was pre-encapsulated in an alginate reservoir via an emulsification process and subsequently electrospun into fibres. This resulted in an increase in bacteriophage viability, but there was still two orders of magnitude drop in activity. Using a coaxial electrospinning process, full bacteriophage activity could be maintained. In this process, a core/shell fibre structure was formed with the T4 bacteriophage being directly incorporated into the fibre core. The core/shell fibre encapsulated bacteriophage exhibited full bacteriophage viability after storing for several weeks at +4°C. Coaxial electrospinning was shown to be capable of encapsulating bacteriophages with high loading capacity, high viability and long storage time. These results are significant in the context of controlling and preventing bacterial infections in perishable foods during storage. © 2013 The Society for Applied Microbiology.

High-Strain Rate Failure Modeling Incorporating Shear Banding and Fracture

Science.gov (United States)

2017-11-22

High Strain Rate Failure Modeling Incorporating Shear Banding and Fracture The views, opinions and/or findings contained in this report are those of...SECURITY CLASSIFICATION OF: 1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND SUBTITLE 13. SUPPLEMENTARY NOTES 12. DISTRIBUTION AVAILIBILITY STATEMENT 6. AUTHORS...Report as of 05-Dec-2017 Agreement Number: W911NF-13-1-0238 Organization: Columbia University Title: High Strain Rate Failure Modeling Incorporating

Biocompatibility of poly(lactic acid) with incorporated graphene-based materials

OpenAIRE

Pinto, Artur Moreira; Moreira, Susana Margarida Gomes; Gonçalves, Inês; Gama, F. M.; Mendes, Adélio; Magalhães, Fernão D.

2013-01-01

The incorporation of graphene-based materials has been shown to improve mechanical properties of poly(lactic acid) (PLA). In this work, PLA films and composite PLA films incorporating two graphene-based materials – graphene oxide (GO) and graphene nanoplatelets (GNP) – were prepared and characterized regarding not only biocompatibility, but also surface topography, chemistry and wettability. The presence of both fillers changed the films surface topography, increasing the roughness, and modif...

Tritiated thymidine incorporation and the growth of heterotrophic bacteria in warm core rings

International Nuclear Information System (INIS)

Ducklow, H.W.; Hill, S.M.

1985-01-01

The time-course of the incorporation rate of [methyl- 3 H]thymidine ([ 3 H]TdR) was established during 6-12 h incubations of natural bacterial populations sampled from the surface layers of warm core Gulf Stream rings. Parallel estimates of changes in cell numbers were made in order to examine the relationships between TdR incorporation and population growth for oceanic bacterial populations. Their results indicate that a conversion factor of 4 x 10 18 cells produced per mole of [ 3 H]TdR incorporated yielded estimates of bacterial production which were within a factor of 2 or 3 of production estimates derived from changes in cell numbers in seawater cultures. The authors observed a significant, direct relationship between the initial rates of TdR incorporation per cell and specific growth rates and conclude that initial short term (15-45 min) assays of TdR incorporation are a valuable tool for studying bacterial production in oceanic waters. In most incubations, the rate of TdR incorporation increased more rapidly than did cell numbers. Very large conversion factor values were derived from these data. The discrepancy between growth determined from TdR incorporation rates and total bacterial numbers in seawater cultures has not been observed in previous studies of coastal, estuarine, or lacustrine bacteria, but was a consistent feature of our studies on oceanic populations

Development and electrochemical characterization of Ni‐P coated tungsten incorporated electroless nickel coatings

Energy Technology Data Exchange (ETDEWEB)

Shibli, S.M.A., E-mail: smashibli@yahoo.com; Chinchu, K.S.

2016-08-01

Ni‐P-W alloy and composite coatings were prepared by incorporation of sodium tungstate/tungsten and Ni‐P coated tungsten into electroless nickel bath respectively. Good inter-particle interactions among the depositing elements i.e. Ni and P with the incorporating tungsten particles were achieved by means of pre-coated tungsten particle by electroless nickel covering prior to its addition into the electroless bath. The pre-coated tungsten particles got incorporated uniformly into the Ni-P matrix of the coating. The particles and the coatings were characterized at different stages by different techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The electroless Ni-P coating incorporated with pre-coated tungsten exhibited considerably high hardness, thickness and deposition rate. The performance and corrosion resistance characteristics of the composite coating incorporated with the nickel coated tungsten were found to be superior over other conventional Ni-P-W ternary alloy coatings currently reported. - Highlights: • An amorphous Ni-P coating was effectively formed on tungsten particles. • Electroless ternary Ni-P-W composite coatings were successfully prepared. • Enhancement in the inter-particle interaction in the Ni-P composite matrix was achieved. • Efficient and uniform incorporation of the composite in the internal layer was evident. • The tungsten incorporated coating possessed effective barrier protection.

Minority Political Incorporation and Policy Outcomes in U.S. School Districts

Science.gov (United States)

Leon, Ana L.

2017-01-01

This study examines if gains in ethnic political representation and incorporation on local school boards result in policy responsiveness, as well as improved student achievement in a way that benefits minorities. By applying the political incorporation framework developed by Browning, Marshall, and Tabb (1984) to the education policy arena, gains…

Emissive sensors and devices incorporating these sensors

Science.gov (United States)

Swager, Timothy M; Zhang, Shi-Wei

2013-02-05

The present invention generally relates to luminescent and/or optically absorbing compositions and/or precursors to those compositions, including solid films incorporating these compositions/precursors, exhibiting increased luminescent lifetimes, quantum yields, enhanced stabilities and/or amplified emissions. The present invention also relates to sensors and methods for sensing analytes through luminescent and/or optically absorbing properties of these compositions and/or precursors. Examples of analytes detectable by the invention include electrophiles, alkylating agents, thionyl halides, and phosphate ester groups including phosphoryl halides, cyanides and thioates such as those found in certain chemical warfare agents. The present invention additionally relates to devices and methods for amplifying emissions, such as those produced using the above-described compositions and/or precursors, by incorporating the composition and/or precursor within a polymer having an energy migration pathway. In some cases, the compositions and/or precursors thereof include a compound capable of undergoing a cyclization reaction.

A Framework Incorporating Community Preferences in Use ...

Science.gov (United States)

The report is intended to assist water quality officials, watershed managers, members of stakeholder groups, and other interested individuals in fully evaluating ecological and socioeconomic objectives and the gains and losses that often are involved in use attainment decisions. In addition, this report enables local, state, and tribal managers to better understand the benefits, as well as the costs, of attaining high water quality, and to incorporate community preferences in decision-making. Specific objectives are (1) to provide an introduction to the CWA and WQS regulation and analyses related to setting or changing designated uses; (2) create a basis for understanding the relationship between use-attainment decisions and the effects on ecosystems, ecosystem services, and ecological benefits; (3) serve as reference for methods that elicit or infer preferences for benefits and costs related to attaining uses and (4) present process for incorporating new approaches in water quality decisions.

Hypericum perforatum incorporated chitosan films as potential bioactive wound dressing material.

Science.gov (United States)

Güneş, Seda; Tıhmınlıoğlu, Funda

2017-09-01

Recent studies in wound dressing applications offer new therapies and promote wound healing process. The aim of this study was to develop Hypericum perforatum (St John's Wort) oil incorporated chitosan films for wound dressing applications. H. perforatum oil as a potential therapeutic agent was encapsulated in chitosan film to achieve a better wound dressing material. Oil incorporated chitosan films were successfully prepared by solvent casting method in different oil concentrations (0.25-1.5%v/v). Water vapor permeability (WVP), mechanical test, swelling behavior and surface hydrophobicity were performed in order to characterize the prepared films. Antimicrobial test was performed by disc diffusion method and the growth inhibition effects of the films including different amount of H. perforatum oil were investigated on Escherichia coli and Staphylococcus aureus. WVP increased with oil incorporation and the highest value was obtained for 0.25% oil concentration.The highest strain value was obtained in 0.25% oil content films although tensile stress decreased with increasing oil content. H. perforatum oil incorporated films had antimicrobial effect on both microorganisms. Chitosan based films had no cytotoxic effects on NIH3T3fibroblast cells and provided a good surface for cell attachment and proliferation. The results showed that the H. perforatum incorporated chitosan films seems to be a potential and novel biomaterial for wound healing applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Concurrent protein synthesis is required for in vivo chitin synthesis in postmolt blue crabs

International Nuclear Information System (INIS)

Horst, M.N.

1990-01-01

Chitin synthesis in crustaceans involves the deposition of a protein-polysaccharide complex at the apical surface of epithelial cells which secrete the cuticle or exoskeleton. The present study involves an examination of in vivo incorporation of radiolabeled amino acids and amino sugars into the cuticle of postmolt blue crabs, Callinectes sapidus. Rates of incorporation of both 3H leucine and 3H threonine were linear with respect to time of incubation. Incorporation of 3H threonine into the endocuticle was inhibited greater than 90% in the presence of the protein synthesis inhibitor, puromycin. Linear incorporation of 14C glucosamine into the cuticle was also demonstrated; a significant improvement of radiolabeling was achieved by using 14C-N-acetylglucosamine as the labeled precursor. Incorporation of 3H-N-acetylglucosamine into the cuticle of postmolt blue crabs was inhibited 89% by puromycin, indicating that concurrent protein synthesis is required for the deposition of chitin in the blue crab. Autoradiographic analysis of control vs. puromycin-treated crabs indicates that puromycin totally blocks labeling of the new endocuticle with 3H glucosamine. These results are consistent with the notion that crustacean chitin is synthesized as a protein-polysaccharide complex. Analysis of the postmolt and intermolt blue crab cuticle indicates that the exoskeleton contains about 60% protein and 40% chitin. The predominant amino acids are arginine, glutamic acid, alanine, aspartic acid, and threonine

40 CFR 174.501 - Bacillus thuringiensis Vip3Aa protein in corn and cotton; exemption from the requirement of a...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Vip3Aa protein in corn and cotton; exemption from the requirement of a tolerance. 174.501 Section 174.501 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS...

40 CFR 174.518 - Bacillus thuringiensis Cry3Bb1 protein in corn; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry3Bb1 protein in corn; exemption from the requirement of a tolerance. 174.518 Section 174.518 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances and...

40 CFR 174.510 - Bacillus thuringiensis Cry1Ac protein in all plants; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry1Ac protein in all plants; exemption from the requirement of a tolerance. 174.510 Section 174.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances...

40 CFR 174.511 - Bacillus thuringiensis Cry1Ab protein in all plants; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry1Ab protein in all plants; exemption from the requirement of a tolerance. 174.511 Section 174.511 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS Tolerances...

Art. 70-71: Incorporation and making available of standard contract terms

NARCIS (Netherlands)

Loos, M.; Colombi Ciacchi, A.

2016-01-01

Incorporation of standard terms is a much-debated issue in almost all legal systems. Any legal instrument on contract law therefore must provide an answer as to when terms are incorporated – but answers may vary considerably from one legal system to the next. In this chapter the provisions of the –

Incorporation of iodine into calcium phosphates with apatitic structure

International Nuclear Information System (INIS)

Coulon, Antoine

2014-01-01

In order to avoid the release of 129 I (long-lived intermediate-level waste) in the environment, we describe a novel material incorporating iodine under the form of iodate in a calcium phosphate based hydroxyapatite. This material is prepared by two synthetic processes: a wet precipitation route followed by a spark plasma sintering and a cementitious route. A high iodine content (with a maximum incorporation rate of 10 wt.%) is reached for both processes, by incorporation of the iodate in the apatitic structure. A monolith with relative density of 88.6% was obtained after shaping of the precipitated powders by spark plasma sintering. This material reveals satisfactory leaching properties, with an initial leaching rate in pure water at 50 C of 10 -2 g.m -2 .j -1 , and a residual leaching rate at 50 C of 10 -5 g.m -2 .j -1 in underground water of potential geological repositories. All in all, this material is a potential candidate for the conditioning of radioactive iodine. (author) [fr

MoO{sub 3} incorporation in magnesium aluminosilicate glasses

Energy Technology Data Exchange (ETDEWEB)

Tan, Shengheng; Ojovan, Michael I.; Hyatt, Neil C.; Hand, Russell J.

2015-03-15

Molybdate has a very low solubility in silicate and borosilicate glass systems and its excess presence in nuclear waste glass can cause the formation of a readily soluble “yellow phase”. In this study, the incorporation of molybdenum oxide (MoO{sub 3}) in a magnesium aluminosilicate glass system has been investigated. The prepared glasses show a higher than 90% molybdenum retention rate and up to 5.34 mol% (12.28 wt%) MoO{sub 3} can be incorporated into these glasses without causing visible phase separation. The incorporation of MoO{sub 3} increases glass density, decreases glass transition and crystallisation temperatures and intensifies Raman bands assigned to vibrations of MoO{sub 4}{sup 2−} units. When excess molybdate is added liquid–liquid phase separation and crystallisation occurs. The separated phase is spherical, 200–400 nm in diameter and randomly dispersed. Based on powder X-ray diffraction, Raman spectroscopy and transmission electron microscopy, the separated phase is identified as MgMoO{sub 4}.

Detection of vitellogenin incorporation into zebrafish oocytes by FITC fluorescence

Directory of Open Access Journals (Sweden)

Yokoi Hayato

2011-04-01

Full Text Available Abstract Background Large volumes of lymph can be collected from the eye-sacs of bubble-eye goldfish. We attempted to induce vitellogenin (Vtg in the eye-sac lymph of bubble-eye goldfish and develop a method for visualizing Vtg incorporation by zebrafish oocytes using FITC-labeling. Methods Estrogen efficiently induced Vtg in the eye-sac lymph of goldfish. After FITC-labeled Vtg was prepared, it was injected into mature female zebrafish. Results Incorporation of FITC-labeled Vtg by zebrafish oocytes was detected in in vivo and in vitro experiments. The embryos obtained from zebrafish females injected with FITC-labeled Vtg emitted FITC fluorescence from the yolk sac and developed normally. Conclusion This method for achieving Vtg incorporation by zebrafish oocytes could be useful in experiments related to the development and endocrinology of zebrafish oocytes.

Technical Note: Effect of Incorporating Expanded Polystyrene ...

African Journals Online (AJOL)

Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of various densities. Workability which is an important property of concrete, aects the rate of placement and the degree of compaction of concrete. Inadequate compaction leads to reduction in both ...

Phenomenological effets of tantalum incorporation into diamond films: Experimental and first principle studies

Energy Technology Data Exchange (ETDEWEB)

Ullah, Mahtab, E-mail: mahtabullah@bzu.edu.pk [Department of Physics, Bahauddin Zakariya University Multan (Pakistan); Rana, Anwar Manzoor; Ahmad, E. [Department of Physics, Bahauddin Zakariya University Multan (Pakistan); Raza, Rizwan [Department of Physics, COMSATS Institute of Information Technology, Lahore-54000 (Pakistan); Hussain, Fayyaz [Department of Physics, Bahauddin Zakariya University Multan (Pakistan); Hussain, Akhtar; Iqbal, Muhammad [Theoretical Physics Division, PINSTECH, P.O. Nilore, Islamabad (Pakistan)

2016-09-01

Graphical abstract: - Highlights: • Fabrication of tantalum incorporated diamonds films using HFCVD technique. • Decrease in resistivity by increasing tantalum content in diamond thin films. • Electronic structure calculations of tantalum incorporated diamonds films through VASP code. • A rise of bond length and bond angles by addition of tantalum in the diamond lattice. • Confirmation of decrease of resistivity by adding tantalum due to creation of impurity states in the bandgap. - Abstract: Tantalum (Ta) incorporated diamond films are synthesized on silicon substrate by chemical vapor deposition under gas mixture of CH{sub 4} + H{sub 2}. Characterizations of the resulting films indicate that morphology and resistivity of as-grown diamond films are significantly influenced by the process parameters and the amount of tantalum incorporated in the diamond films. XRD plots reveal that diamond films are composed of TaC along with diamond for higher concentration of tantalum and Ta{sub 2}C phases for lower concentration of tantalum. EDS spectra confirms the existence of tantalum in the diamond films. Resistivity measurements illustrate a sudden fall of about two orders of magnitude by the addition of tantalum in the diamond films. Band structure of Ta-incorporated diamond has been investigated based on density functional theory (DFT) using VASP code. Band structure calculations lead to the semiconducting behavior of Ta-incorporated diamond films because of the creation of defects states inside the band gap extending towards conduction band minimum. Present DFT results support experimental trend of resistivity that with the incorporation of tantalum into diamond lattice causes a decrease in the resistivity of diamond films so that tantalum-incorporated diamond films behave like a good semiconductor.

Increasing the fidelity of noncanonical amino acid incorporation in cell-free protein synthesis.

Science.gov (United States)

Gan, Qinglei; Fan, Chenguang

2017-11-01

Cell-free protein synthesis provides a robust platform for co-translational incorporation of noncanonical amino acid (ncAA) into proteins to facilitate biological studies and biotechnological applications. Recently, eliminating the activity of release factor 1 has been shown to increase ncAA incorporation in response to amber codons. However, this approach could promote mis-incorporation of canonical amino acids by near cognate suppression. We performed a facile protocol to remove near cognate tRNA isoacceptors of the amber codon from total tRNAs, and used the phosphoserine (Sep) incorporation system as validation. By manipulating codon usage of target genes and tRNA species introduced into the cell-free protein synthesis system, we increased the fidelity of Sep incorporation at a specific position. By removing three near cognate tRNA isoacceptors of the amber stop codon [tRNA Lys , tRNA Tyr , and tRNA Gln (CUG)] from the total tRNA, the near cognate suppression decreased by 5-fold without impairing normal protein synthesis in the cell-free protein synthesis system. Mass spectrometry analyses indicated that the fidelity of ncAA incorporation was improved. Removal of near cognate tRNA isoacceptors of the amber codon could increase ncAA incorporation fidelity towards the amber stop codon in release factor deficiency systems. We provide a general strategy to improve fidelity of ncAA incorporation towards stop, quadruplet and sense codons in cell-free protein synthesis systems. This article is part of a Special Issue entitled "Biochemistry of Synthetic Biology - Recent Developments" Guest Editor: Dr. Ilka Heinemann and Dr. Patrick O'Donoghue. Copyright © 2016 Elsevier B.V. All rights reserved.

Effect of sclerin on amino acid incorporation into mitochondria isolated from rat liver

International Nuclear Information System (INIS)

Yamaguchi, Masanori; Satomura, Yukio

1975-01-01

Though sclerin (SCL) stimulated amino acid incorporation into the protein fraction of post mitochondrial supernatant of rat liver homogenate, it had no effect on the incorporation into the isolated mitochondria at pH 7.2, despite of its stimulating effect on mitochondrial oxidative phosphorylation. SCL stimulated amino acid incorporation into the mitochondria at pH 6.1, and to some extent maintained the activity on that in mitochondria during aging in hypotonic Tris-HCl buffer (pH 7.2). Since SCL prevented leakage of amino acids from the mitochondria into these buffers, it was suggested that SCL may protect a structure of mitochondrial membrane which appeared to have a significance on transport of amino acids. In liver slices, SCL stimulated amino acid incorporation only into the extra-mitochondrial fraction for the first 3 min, but gradually turned to simulate incorporation into mitochondria within 30 min. (auth.)

Effect of sclerin on amino acid incorporation into mitochondria isolated from rat liver

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, M; Satomura, Y [Osaka City Univ. (Japan). Faculty of Science

1975-08-01

Though sclerin (SCL) stimulated amino acid incorporation into the protein fraction of post mitochondrial supernatant of rat liver homogenate, it had no effect on the incorporation into the isolated mitochondria at pH 7.2, despite of its stimulating effect on mitochondrial oxidative phosphorylation. SCL stimulated amino acid incorporation into the mitochondria at pH 6.1, and to some extent maintained the activity on that in mitochondria during aging in hypotonic Tris-HCl buffer (pH 7.2). Since SCL prevented leakage of amino acids from the mitochondria into these buffers, it was suggested that SCL may protect a structure of mitochondrial membrane which appeared to have a significance on transport of amino acids. In liver slices, SCL stimulated amino acid incorporation only into the extra-mitochondrial fraction for the first 3 min, but gradually turned to simulate incorporation into mitochondria within 30 min.

Cs and Ag co-incorporation in cubic silicon carbide

Science.gov (United States)

Londono-Hurtado, Alejandro; Heim, Andrew J.; Kim, Sungtae; Szlufarska, Izabela; Morgan, Dane

2013-08-01

Understanding the diffusion of fission products Cs and Ag through the SiC layer of TRISO particles is of particular interest for the progress and improvement of the High Temperature Gas Reactor (HTGR) technologies. Although the SiC layer acts as a barrier for fission products, there is experimental evidence of Cs and Ag diffusion through this layer. Previous considerations of Ag and Cs in SiC have focused on the element interacting with SiC, but have not considered the possibility of co-incorporation with another species. This paper presents a ab initio study on the co-incorporation of Cs and Ag with an anion (Iodine (I) or Oxygen (O)) into SiC as an alternative incorporation mechanism. It is found that for crystalline SiC, Ag co-incorporation with Iodine (I) and Oxygen (O) into SiC is not energetically favorable, while Cs co-incorporation with O is a preferred mechanism under some oxygen partial pressures of interest. However, Cs-O co-incorporation into the crystalline portion of SiC is not sufficiently strong to enable a Cs solubility that accounts for the Cs release observed in some experiments. Formation energies are a function of the chemical potential of Si and C. Calculations in this paper are performed for Si-rich and C-rich conditions, which constitute the boundaries for which the formation energies are allowed to vary. Calculation of the electronic potential shift is required in order to ensure that the Fermi level in a defected cell is defined with respect to the same valence band level in the undefected cell [21,23]. The potential shift is calculated by aligning low energy levels in the total density of states (DOS) [24]. Spurious interactions between images of the charged defects make it necessary to correct for unphysical electrostatic interactions. Both the monopole-monopole and monopole-quadrupole Makov Payne corrections are used for this purpose. However, strain and incompletely corrected electrostatic interactions can still lead to significant

ASME Code requirements for multi-canister overpack design and fabrication

International Nuclear Information System (INIS)

SMITH, K.E.

1998-01-01

The baseline requirements for the design and fabrication of the MCO include the application of the technical requirements of the ASME Code, Section III, Subsection NB for containment and Section III, Subsection NG for criticality control. ASME Code administrative requirements, which have not historically been applied at the Hanford site and which have not been required by the US Nuclear Regulatory Commission (NRC) for licensed spent fuel casks/canisters, were not invoked for the MCO. As a result of recommendations made from an ASME Code consultant in response to DNFSB staff concerns regarding ASME Code application, the SNF Project will be making the following modifications: issue an ASME Code Design Specification and Design Report, certified by a Registered Professional Engineer; Require the MCO fabricator to hold ASME Section III or Section VIII, Division 2 accreditation; and Use ASME Authorized Inspectors for MCO fabrication. Incorporation of these modifications will ensure that the MCO is designed and fabricated in accordance with the ASME Code. Code Stamping has not been a requirement at the Hanford site, nor for NRC licensed spent fuel casks/canisters, but will be considered if determined to be economically justified

Information rich mapping requirement to product architecture through functional system deployment: The multi entity domain approach

DEFF Research Database (Denmark)

Hauksdóttir, Dagný; Mortensen, Niels Henrik

2017-01-01

may impede the ability to evolve, maintain or reuse systems. In this paper the Multi Entity Domain Approach (MEDA) is presented. The approach combines different design information within the domain views, incorporates both Software and Hardware design and supports iterative requirements definition...

75 FR 56096 - Access to Confidential Business Information by Industrial Economics Incorporated

Science.gov (United States)

2010-09-15

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2003-0004; FRL-8845-1] Access to Confidential Business Information by Industrial Economics Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA has authorized contractor, Industrial Economics Incorporated (IEI) of...

Nano-graphene oxide incorporated into PMMA resin to prevent microbial adhesion.

Science.gov (United States)

Lee, Jung-Hwan; Jo, Jeong-Ki; Kim, Dong-Ae; Patel, Kapil Dev; Kim, Hae-Won; Lee, Hae-Hyoung

2018-04-01

Although polymethyl methacrylate (PMMA) is widely used as a dental material, a major challenge of using this substance is its poor antimicrobial (anti-adhesion) effects, which increase oral infections. Here, graphene-oxide nanosheets (nGO) were incorporated into PMMA to introduce sustained antimicrobial-adhesive effects by increasing the hydrophilicity of PMMA. After characterizing nGO and nGO-incorporated PMMA (up to 2wt%) in terms of morphology and surface characteristics, 3-point flexural strength and hardness were evaluated. The anti-adhesive effects were determined for 4 different microbial species with experimental specimens and the underlying anti-adhesive mechanism was investigated by a non-thermal oxygen plasma treatment. Sustained antimicrobial-adhesive effects were characterized with incubation in artificial saliva for up to 28 days. The typical nanosheet morphology was observed for nGO. Incorporating nGO into PMMA roughened its surface and increased its hydrophilicity without compromising flexural strength or surface hardness. An anti-adhesive effect after 1h of exposure to microbial species in artificial saliva was observed in nGO-incorporated specimens, which accelerated with increasing levels of nGO without significant cytotoxicity to oral keratinocytes. Plasma treatment of native PMMA demonstrated that the antimicrobial-adhesive effects of nGO incorporation were at least partially due to increased hydrophilicity, not changes in the surface roughness. A sustained antimicrobial-adhesive property against Candida albicans was observed in 2% nGO for up to 28 days. The presence of sustained anti-adhesion properties in nGO-incorporated PMMA without loading any antimicrobial drugs suggests the potential usefulness of this compound as a promising antimicrobial dental material for dentures, orthodontic devices and provisional restorative materials. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Clinical requirements for radionuclide imaging and recording

International Nuclear Information System (INIS)

McCready, R.; Flower, M.; Royal Marsden Hospital, Sutton

1985-01-01

The quality of current nuclear medicine images and display on hard copy makes diagnosis difficult and the interpretation of results by colleagues more difficult than it need be. The solution is to take full advantage of the power of currently available digital computers. It is understandable that the relatively small sales in the nuclear medicine field limits the effort and expense that can put into development. However, it is hoped that if the requirements are defined then advantage can be taken of recent developments in the mass market to incorporate these into nuclear medicine systems at less cost than was previously possible. (orig.) [de

Enhancing the biophysical properties of mRFP1 through incorporation of fluoroproline

Energy Technology Data Exchange (ETDEWEB)

Deepankumar, Kanagavel; Nadarajan, Saravanan Prabhu; Ayyadurai, Niraikulam; Yun, Hyungdon, E-mail: hyungdon@ynu.ac.kr

2013-11-01

Graphical abstract: Enhancing the biophysical properties of mRFP1 through incorporation of (2S, 4R)-4-fluoroproline at proline residues after mutating non-permissive site Pro63 into Ala. -- Highlights: •We incorporate (4S)-FP into mRFP1 led to insoluble protein. •Whereas, incorporation of (4R)-FP resulted in soluble but lost its fluorescence. •mRFP1-P63A mutant accommodate (4R)-FP and gave soluble protein with fluorescence. •Moreover mRFP1-P63A[(4R)-FP] showed enhanced biophysical properties of protein. -- Abstract: Here we enhanced the stability and biophysical properties of mRFP1 through a combination of canonical and non-canonical amino acid mutagenesis. The global replacement of proline residue with (2S, 4R)-4-fluoroproline [(4R)-FP] into mRFP1 led to soluble protein but lost its fluorescence, whereas (2S, 4S)-4-fluoroproline [(4S)-FP] incorporation resulted in insoluble protein. The bioinformatics analysis revealed that (4R)-FP incorporation at Pro63 caused fluorescence loss due to the steric hindrance of fluorine atom of (4R)-FP with the chromophore. Therefore, Pro63 residue was mutated with the smallest amino acid Ala to maintain non coplanar conformation of the chromophore and helps to retain its fluorescence with (4R)-FP incorporation. The incorporation of (4R)-FP into mRFP1-P63A showed about 2–3-fold enhancement in thermal and chemical stability. The rate of maturation is also greatly accelerated over the presence of (4R)-FP into mRFP1-P63A. Our study showed that a successful enhancement in the biophysical property of mRFP1-P63A[(4R)-FP] using non-canonical amino acid mutagenesis after mutating non-permissive site Pro63 into Ala.

Enhancing the biophysical properties of mRFP1 through incorporation of fluoroproline

International Nuclear Information System (INIS)

Deepankumar, Kanagavel; Nadarajan, Saravanan Prabhu; Ayyadurai, Niraikulam; Yun, Hyungdon

2013-01-01

Graphical abstract: Enhancing the biophysical properties of mRFP1 through incorporation of (2S, 4R)-4-fluoroproline at proline residues after mutating non-permissive site Pro63 into Ala. -- Highlights: •We incorporate (4S)-FP into mRFP1 led to insoluble protein. •Whereas, incorporation of (4R)-FP resulted in soluble but lost its fluorescence. •mRFP1-P63A mutant accommodate (4R)-FP and gave soluble protein with fluorescence. •Moreover mRFP1-P63A[(4R)-FP] showed enhanced biophysical properties of protein. -- Abstract: Here we enhanced the stability and biophysical properties of mRFP1 through a combination of canonical and non-canonical amino acid mutagenesis. The global replacement of proline residue with (2S, 4R)-4-fluoroproline [(4R)-FP] into mRFP1 led to soluble protein but lost its fluorescence, whereas (2S, 4S)-4-fluoroproline [(4S)-FP] incorporation resulted in insoluble protein. The bioinformatics analysis revealed that (4R)-FP incorporation at Pro63 caused fluorescence loss due to the steric hindrance of fluorine atom of (4R)-FP with the chromophore. Therefore, Pro63 residue was mutated with the smallest amino acid Ala to maintain non coplanar conformation of the chromophore and helps to retain its fluorescence with (4R)-FP incorporation. The incorporation of (4R)-FP into mRFP1-P63A showed about 2–3-fold enhancement in thermal and chemical stability. The rate of maturation is also greatly accelerated over the presence of (4R)-FP into mRFP1-P63A. Our study showed that a successful enhancement in the biophysical property of mRFP1-P63A[(4R)-FP] using non-canonical amino acid mutagenesis after mutating non-permissive site Pro63 into Ala

Incorporating stand level risk management options into forest decision support systems

Directory of Open Access Journals (Sweden)

Kyle Eyvindson

2018-01-01

Full Text Available Aim of study: To examine methods of incorporating risk and uncertainty to stand level forest decisions. Area of study: A case study examines a small forest holding from Jönköping, Sweden. Material and methods: We incorporate empirically estimated uncertainty into the simulation through a Monte Carlo approach when simulating the forest stands for the next 100 years. For the iterations of the Monte Carlo approach, errors were incorporated into the input data which was simulated according to the Heureka decision support system. Both the Value at Risk and the Conditional Value at Risk of the net present value are evaluated for each simulated stand. Main results: Visual representation of the errors can be used to highlight which decision would be most beneficial dependent on the decision maker’s opinion of the forest inventory results. At a stand level, risk preferences can be rather easily incorporated into the current forest decision support software. Research highlights: Forest management operates under uncertainty and risk. Methods are available to describe this risk in an understandable fashion for the decision maker.

Incorporation of plant materials in the control of root pathogens in muskmelon

Directory of Open Access Journals (Sweden)

Andréa Mirne de Macêdo Dantas

2013-12-01

Full Text Available The effect of plant materials[Sunn Hemp (Crotalaria juncea, Castor Bean (Ricinus communis L., Cassava (Manihot esculenta Crantz and Neem (Azadirachta indica] and the times of incorporation of these materials in regards to the incidence of root rot in melon was evaluated in Ceará state, Brazil. The experiment was conducted in a commercial area with a history of root pathogens in cucurbitaceae. The randomized block design was used, in a 5 x 3 factorial arrangement with four repetitions. The treatments consisted of a combination of four plant materials (sunn hemp, castor beans, cassava and neem and a control with no soil incorporation of plant material and three times of incorporation (28, 21, and 14 days before the transplanting of the seedlings. Lower incidence of root rot was observed in practically all of the treatments where materials were incorporated at different times, with variation between the materials, corresponding with the time of incorporation, in relation to the soil without plant material. The pathogens isolated from the symptomatic muskmelon plants were Fusarium solani, Macrophomina phaseolina, Monosporascus cannonballus and Rhizoctonia solani, F. solani being encountered most frequently.

Infrared absorption study of hydrogen incorporation in thick nanocrystalline diamond films

International Nuclear Information System (INIS)

Tang, C.J.; Neves, A.J.; Carmo, M.C.

2005-01-01

We present an infrared (IR) optical absorbance study of hydrogen incorporation in nanocrystalline diamond films. The thick nanocrystalline diamond films were synthesized by microwave plasma-assisted chemical vapor deposition and a high growth rate about 3.0 μm/h was achieved. The morphology, phase quality, and hydrogen incorporation were assessed by means of scanning electron microscopy, Raman spectroscopy, and Fourier-transform infrared spectroscopy (FTIR). Large amount of hydrogen bonded to nanocrystalline diamond is clearly evidenced by the huge CH stretching band in the FTIR spectrum. The mechanism of hydrogen incorporation is discussed in light of the growth mechanism of nanocrystalline diamond. This suggests the potential of nanocrystalline diamond for IR electro-optical device applications

Incorporating Engineering Design Challenges into STEM Courses

Science.gov (United States)

Householder, Daniel L., Ed.; Hailey, Christine E., Ed.

2012-01-01

Successful strategies for incorporating engineering design challenges into science, technology, engineering, and mathematics (STEM) courses in American high schools are presented in this paper. The developers have taken the position that engineering design experiences should be an important component of the high school education of all American…

A Market for Company Incorporations in the European Union?

DEFF Research Database (Denmark)

Birkmose, Hanne Søndergaard

2005-01-01

The article discuss the European market for company incorporation in light of the recent decisions of the European Court of Justice; Centros (1999 E.C.R. at I-1487), Überseering (2002 E.C.R. at I-9919) and Inspire Art (2003 E.C.R. at I-10155)......The article discuss the European market for company incorporation in light of the recent decisions of the European Court of Justice; Centros (1999 E.C.R. at I-1487), Überseering (2002 E.C.R. at I-9919) and Inspire Art (2003 E.C.R. at I-10155)...

European utilities requirements for future reactors

International Nuclear Information System (INIS)

Roch, M.

1996-01-01

The prospect for future nuclear power plants has led the utilities of seven European countries to launch an effort to define the requirements that should be common to all utilities for the next reactors to be built in Europe. These requirements will ultimately be part of a four-volume document and will cover all aspects of a plant: performance, grid connection, codes and standards, materials, quality assurance, cost, and, of course, safety. The seven European countries - France, the United Kingdom, Germany, Spain, Italy, the Netherlands, and Belgium - issued revision A of Vols 1 and 2 in Nov. 1994, which deal with all the general requirements, not specific to any design, originally issued in March 1994. Comments were requested from most of the nuclear utilities as well as from reactor vendors worldwide. This gave rise to an enormous number of comments, which were duly considered by the European Union. The relevant ones were incorporated into revision B of Vols. 1 and 2, which was issued in Nov 1995, the objective of this revision B being essentially to gain approval from the safety authorities. A particular aspect of the European approach resides in the fact that these European requirements will have to be discussed and agreed on by at least nine safety authorities, i.e., the authorities of the seven counties that launched revision B, plus the authorities of two newcomers, Finland and Sweden, which have just applied for European Union membership

76 FR 69722 - Access to Confidential Business Information by Protection Strategies Incorporated

Science.gov (United States)

2011-11-09

... Business Information by Protection Strategies Incorporated AGENCY: Environmental Protection Agency (EPA... Control Act (TSCA) confidential business information and to provide notice that this contract has been extended until December 31, 2011. Protection Strategies Incorporated (PSI) has been the owner of Eagle...

30 CFR 77.403-2 - Incorporation by reference.

Science.gov (United States)

2010-07-01

... MINES Safeguards for Mechanical Equipment § 77.403-2 Incorporation by reference. In accordance with 5 U..., Engineering and Research Center, Denver, Colorado. SAE documents are available from the Society of Automotive...

Incorporation of carbohydrate residues into peroxidase isoenzymes in horseradish roots.

Science.gov (United States)

Lew, J Y; Shannon, L M

1973-11-01

Sliced root tissue of the horseradish plant (Armoracia rusticana), when incubated with mannose-U-(14)C, incorporated radioactivity into peroxidase isoenzymes. Over 90% of the radioactivity in the highly purified peroxidase isoenzymes was present in the neutral sugar residues of the molecule, i.e. fucose, arabinose, xylose, mannose. When the root slices were incubated simultaneously with leucine-4,5-(3)H and mannose-U-(14)C, cycloheximide strongly inhibited leucine incorporation into the peptide portion of peroxidase isoenzymes but had little effect on the incorporation of (14)C into the neutral sugars. These results indicated that synthesis of the peptide portion of peroxidase was completed before the monosaccharide residues were attached to the molecule. This temporal relationship between the synthesis of protein and the attachment of carbohydrate residues in the plant glycoprotein, horseradish peroxidase, appears to be similar to that reported for glycoprotein biosynthesis in many mammalian systems.

Ohio dentists' awareness and incorporation of the dental home concept.

Science.gov (United States)

Hammersmith, Kimberly J; Siegal, Mark D; Casamassimo, Paul S; Amini, Homa

2013-06-01

The authors measured the awareness of the dental home concept among pediatric dentists (PDs) and general practice dentists (GPs) in Ohio and determined whether they included dental home characteristics for children 5 years and younger into their practices. The authors sent a pretested 20-question survey to all Ohio PDs and to a random sample of approximately 20 percent of GPs in Ohio. The authors designed the survey to elicit information about dental home awareness and the extent to which dental home characteristics were incorporated into dental practices. More than 90 percent of both GPs and PDs incorporated or intended to incorporate into their dental practices the specific dental home characteristics mentioned in 20 of 41 items related to dental home characteristics. Of the respondents who did not already incorporate dental home characteristics into their practices, however, most did not intend to do so. Less than 50 percent of respondents in both groups responded positively to some items in the culturally effective group, and GPs were less likely than were PDs to provide a range of behavior management services and to provide treatment for patients with complex medical and dental treatment needs. PDs were more likely than were GPs to accept Ohio Medicaid (64 versus 33 percent). PDs were more likely than were GPs (78 versus 18 percent) to be familiar with the term "dental home." More recent dental school graduates were more familiar with the term. Most Ohio PDs' and GPs' practices included characteristics found in the definition of dental home, despite a general lack of concept awareness on the part of GPs. Research is needed to provide an evidence base for the dental home. Practical Implications. Once an evidence base is developed for the important aspects of the dental home and the definition is revised, efforts should be made to incorporate these aspects more broadly into dental practice.

Requirements for internal contamination monitoring units; Anforderungen an Inkorporationsmessstellen

Energy Technology Data Exchange (ETDEWEB)

Werner, E. [GSF, Inst. fuer Biophysikalische Strahlenforschung, Frankfurt am Main (Germany); Beyer, D. [Forschungszentrum Juelich, Abt. ASS (Germany); Doerfel, H. [Hauptabteilung Sicherheit, Kernforschungszentrum Karlsruhe (Germany); Erlenbach, H. [Zentralstelle fuer Sicherheitstechnik NRW, Duesseldorf (Germany); Fischbach, G. [Siemens Brennelementewerk, Hanau (Germany); Henrichs, K. [Siemens AG, Muenchen (Germany); Keller, K.D. [Radiologische Universitaetsklinik, Tuebingen (Germany); Koenig, K. [Bundesamt fuer Strahlenschutz, ISH, Neuherberg (Germany); Riedel, W. [Freie Univ. Berlin, Klinikum Steglitz (Germany); Scheler, R. [Bundesamt fuer Strahlenschutz, FB Strahlenschutz, Berlin (Germany); Schieferdecker, H. [Hauptabteilung Sicherheit, Kernforschungszentrum Karlsruhe (Germany)

1994-12-31

For the evaluation of internal contamination by officially authorized monitoring units according to section 63 (6) of the German radiation protection ordinance, a directive will be prepared in order to define uniform requirements for the laboratories in charge of incorporation monitoring by appointment of the relevant authorities. These requirements refer to equipment, to performance of measurements, to interpretation of measured values, to quality control as well as to documentation and to delivery of results. The duties of such laboratories comprise measurements of radioactivity, evaluation of intakes of radionuclides and of the resulting internal radiation dose, but also transmission of results to the employer, to the central dose registry, and under certain circumstances to the authorities. Among the requirements to be met by the laboratory for incorporation control are a sufficient measuring efficiency, the implementation of in-house checks, and the participation in intercomparison programs. For the accomplishment of such duties the laboratory needs appropriate apparatus, rooms, facilities, and staffing. (orig.) [Deutsch] Zur Ermittlung der Koerperdosen nach Paragraph 63 StrlSchV sind fuer die gemaess Abs. 6 von der zustaendigen Behoerde zu bestimmenden Messstellen in einer Richtlinie einheitliche Anforderungen festzulegen. Diese beziehen sich auf deren Ausstattung, die Durchfuehrung der Messungen, Auswertungen und Qualitaetskontrollen sowie die Aufzeichnung und Uebermittlung der Ergebnisse. Die Aufgaben der Messstellen umfassen die Messungen der Radioaktivitaet im Koerper bzw. in Koerperausscheidungen, die Ermittlung der Zufuhr an Radionukliden sowie der daraus resultierenden Koerperdosis und die Weiterleitung der Ergebnisse an den Auftraggeber, an das zentrale Dosisregister und in bestimmten Faellen an die Behoerde. Zu den von einer Messstelle zu erfuellenden Anforderungen gehoeren eine ausreichende Messeffektivitaet, die Durchfuehrung von Eigenkontrollen

Effectiveness of reinforcement incorporation and mechanical properties of composites produced from rheocast slurries

Energy Technology Data Exchange (ETDEWEB)

Robert, M.H.; Galvao da Silveira Mussi, R. [Faculty of Mechanical Engineering, State Univ. of Campinas, Cidade Univ. (Brazil)

2002-07-01

The influence of compocasting variables (SiC size and %vol, additions of grain refiner and extra Mg) in the quality of A356+SiCp MMCs is investigated. In all conditions microstructures show Al-{alpha} with globular morphology with eutectic and SiC in interglobular regions. Results show tendency of agglomeration of thinner particles, jeopardising their incorporation and dispersion in the matrix; high quantities of SiC are not incorporated into rheocast slurries with refined globules, grain refinement decreases incorporation of bigger particles. Extra Mg does not influence incorporation. Best results are obtained for 15% vol of 30 {mu}m SiC added to grain refined matrix. Mechanical properties are poor when agglomeration of particles is present. (orig.)

40 CFR 432.5 - Incorporation by reference.

Science.gov (United States)

2010-07-01

... AND STANDARDS MEAT AND POULTRY PRODUCTS POINT SOURCE CATEGORY § 432.5 Incorporation by reference. (a... Federal Register. The material is available for purchase at the address in paragraph (b) of this section..., Washington, DC. (b) The following material is available for purchase from the National Technical Information...

Behaviour of high-strength concrete incorporating ground ...

African Journals Online (AJOL)

of tests were carried out on concrete incorporating Ground Granulated Blast Furnace Slag (GGBFS) of “Mittal ... mechanical properties by using the existing materials on the local market and HSC ..... general shape of the curves whether at 28 days ... Figure.7. Residual compressive strength as a function of temperature.

Incorporating modern OpenGL into computer graphics education.

Science.gov (United States)

Reina, Guido; Muller, Thomas; Ertl, Thomas

2014-01-01

University of Stuttgart educators have updated three computer science courses to incorporate forward-compatible OpenGL. To help students, they developed an educational framework that abstracts some of modern OpenGL's difficult aspects.

75 FR 20265 - Airworthiness Directives; Liberty Aerospace Incorporated Model XL-2 Airplanes

Science.gov (United States)

2010-04-19

... Office, 1701 Columbia Avenue, College Park, Georgia 30337; telephone: (404) 474-5524; facsimile: (404... Airworthiness Directives; Liberty Aerospace Incorporated Model XL-2 Airplanes AGENCY: Federal Aviation...-08- 05, which applies to certain Liberty Aerospace Incorporated Model XL-2 airplanes. AD 2009-08-05...

Incorporation of a horizontally transferred gene into an operon during cnidarian evolution.

Directory of Open Access Journals (Sweden)

Catherine E Dana

Full Text Available Genome sequencing has revealed examples of horizontally transferred genes, but we still know little about how such genes are incorporated into their host genomes. We have previously reported the identification of a gene (flp that appears to have entered the Hydra genome through horizontal transfer. Here we provide additional evidence in support of our original hypothesis that the transfer was from a unicellular organism, and we show that the transfer occurred in an ancestor of two medusozoan cnidarian species. In addition we show that the gene is part of a bicistronic operon in the Hydra genome. These findings identify a new animal phylum in which trans-spliced leader addition has led to the formation of operons, and define the requirements for evolution of an operon in Hydra. The identification of operons in Hydra also provides a tool that can be exploited in the construction of transgenic Hydra strains.

Permeability optimization and performance evaluation of hot aerosol filters made using foam incorporated alumina suspension.

Science.gov (United States)

Innocentini, Murilo D M; Rodrigues, Vanessa P; Romano, Roberto C O; Pileggi, Rafael G; Silva, Gracinda M C; Coury, José R

2009-02-15

Porous ceramic samples were prepared from aqueous foam incorporated alumina suspension for application as hot aerosol filtering membrane. The procedure for establishment of membrane features required to maintain a desired flow condition was theoretically described and experimental work was designed to prepare ceramic membranes to meet the predicted criteria. Two best membranes, thus prepared, were selected for permeability tests up to 700 degrees C and their total and fractional collection efficiencies were experimentally evaluated. Reasonably good performance was achieved at room temperature, while at 700 degrees C, increased permeability was obtained with significant reduction in collection efficiency, which was explained by a combination of thermal expansion of the structure and changes in the gas properties.

40 CFR 174.519 - Bacillus thuringiensis Cry2Ab2 protein in corn and cotton; exemption from the requirement of a...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry2Ab2 protein in corn and cotton; exemption from the requirement of a tolerance. 174.519 Section 174.519 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS...

40 CFR 174.532 - Bacillus thuringiensis eCry3.1Ab protein in corn; temporary exemption from the requirement of a...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis eCry3.1Ab protein in corn; temporary exemption from the requirement of a tolerance. 174.532 Section 174.532 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS...

Defining System Requirements: a critical assessment of the Niam conceptual design procedure

Directory of Open Access Journals (Sweden)

Peta Darke

1995-05-01

Full Text Available Requirements definition is a fundamental activity within information systems development. Social and organisational issues are at the centre of many of the problems experienced during the development and implementation of information systems, and these need to be explored during requirements definition. The NIAM Conceptual Schema Design Procedure (CSDP is a method for identifying and describing information requirements using fact types. This paper discusses some limitations of the information requirements definition step of the CSDP which result from its lack of focus on the socio-organisational dimension of information systems development. Four different approaches to exploring the socio-organisational contexts of systems are discussed. It is proposed that one of these, viewpoint development, be incorporated into the NIAM CSDP to provide a means of exploring and understanding a system's socio organisational context and to ensure that contextual information is a major input to the requirements definition process. This results in an enhanced design procedure. Future and current research areas are identified.

Cell-free unnatural amino acid incorporation with alternative energy systems and linear expression templates.

Science.gov (United States)

Shrestha, Prashanta; Smith, Mark Thomas; Bundy, Bradley Charles

2014-01-25

Site-specific incorporation of unnatural amino acids (uAAs) during protein synthesis expands the proteomic code through the addition of unique residue chemistry. This field provides a unique tool to improve pharmacokinetics, cancer treatments, vaccine development, proteomics and protein engineering. The limited ability to predict the characteristics of proteins with uAA-incorporation creates a need for a low-cost system with the potential for rapid screening. Escherichia coli-based cell-free protein synthesis is a compelling platform for uAA incorporation due to the open and accessible nature of the reaction environment. However, typical cell-free systems can be expensive due to the high cost of energizing reagents. By employing alternative energy sources, we reduce the cost of uAA-incorporation in CFPS by 55%. While alternative energy systems reduce cost, the time investment to develop gene libraries can remain cumbersome. Cell-free systems allow the direct use of PCR products known as linear expression templates, thus alleviating tedious plasmid library preparations steps. We report the specific costs of CFPS with uAA incorporation, demonstrate that LETs are suitable expression templates with uAA-incorporation, and consider the substantial reduction in labor intensity using LET-based expression for CFPS uAA incorporation. Copyright © 2013 Elsevier B.V. All rights reserved.

Radiation sterelization of chicken dejections for their incorporation in animal feed

International Nuclear Information System (INIS)

Oularbi, S.; Nouani, A.

1992-09-01

Deshydrated chicken dejection obtained from chicken grown in battery were irradiated by using gamma rays and incorporated in the ovine and bovine food. Dejection presented a high content of nitrogen, and other minerals. Treatment done with a dose of 10kGy was biologically safe. Their incorporation in the ovine food allowed us to substitute the soybean by chicken dejection

Tramp ship routing and scheduling with voyage separation requirements

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Lusby, Richard Martin; Larsen, Jesper

2017-01-01

spread between some voyages. The incorporation of these separation requirements helps balance the conflicting objectives of maximising profit for the tramp operator and minimising inventory costs for the charterer, since these costs increase if similar voyages are not performed with some separation......In this paper we explore tramp ship routing and scheduling. Tramp ships operate much like taxies following the available demand. Tramp operators can determine some of their demand in advance by entering into long-term contracts and then try to maximise profits from optional voyages found...

Calculation of the activity incorporated in the therapy with I 131

International Nuclear Information System (INIS)

Chica, L.G.; Puerta, J.A.

1998-01-01

By means of the product S(T--S). A-s-(T-e-). the absorbed dose to thyroid delivered by I-131 incorporated is calculated. Where S(T--S) is the absorbed dose in the thyroid per nuclear transformations (tn.) of I-131 localized in the thyroid and as a potential function of the mass is expressed. A-s-(T-e-) is the number of tn. of I-131 in the thyroid since the moment of the incorporation until the time T-e- (the effective middle time); to find A-s-(T-e-) to normal as different pathological conditions, the metabolic model of the iodo proposed by the ICRP is used. Of the expression of the doses, the incorporated activity, I-o- is obtained

Spent fuel storage requirements 1989--2020

International Nuclear Information System (INIS)

1989-10-01

Historical inventories of spent fuel are combined with Department of Energy (DOE) projections of future discharges from commercial nuclear reactors in the US to provide estimates of spent fuel storage requirements over the next 32 years, through the year 2020. The needs for storage capacity beyond that presently available in the pools are estimated. These estimates incorporate the maximum capacities within current and planned in-pool storage facilities and any planned transshipments of fuel to other reactors or facilities. Historical data through December 1988 are derived from the 1989 Form RW-859 data survey of nuclear utilities. Projected discharges through the end of reactor life are based on DOE estimates of future nuclear capacity, generation, and spent fuel discharges. 14 refs., 3 figs., 28 tabs

Spent fuel storage requirements 1993--2040

International Nuclear Information System (INIS)

1994-09-01

Historical inventories of spent fuel are combined with U.S. Department of Energy (DOE) projections of future discharges from commercial nuclear reactors in the United States to provide estimates of spent fuel storage requirements through the year 2040. The needs are estimated for storage capacity beyond that presently available in the reactor storage pools. These estimates incorporate the maximum capacities within current and planned in-pool storage facilities and any planned transshipments of spent fuel to other reactors or facilities. Existing and future dry storage facilities are also discussed. The nuclear utilities provide historical data through December 1992 on the end of reactor life are based on the DOE/Energy Information Administration (EIA) estimates of future nuclear capacity, generation, and spent fuel discharges

Syntheses and characterization of liposome-incorporated adamantyl aminoguanidines.

Science.gov (United States)

Šekutor, Marina; Štimac, Adela; Mlinarić-Majerski, Kata; Frkanec, Ruža

2014-08-21

A series of mono and bis-aminoguanidinium adamantane derivatives has been synthesized and incorporated into liposomes. They combine two biomedically significant molecules, the adamantane moiety and the guanidinium group. The adamantane moiety possesses the membrane compatible features while the cationic guanidinium subunit was recognized as a favourable structural feature for binding to complementary molecules comprising phosphate groups. The liposome formulations of adamantyl aminoguanidines were characterized and it was shown that the entrapment efficiency of the examined compounds is significant. In addition, it was demonstrated that liposomes with incorporated adamantyl aminoguanidines effectively recognized the complementary liposomes via the phosphate group. These results indicate that adamantane derivatives bearing guanidinium groups might be versatile tools for biomedical application, from studies of molecular recognition processes to usage in drug formulation and cell targeting.

Microbial incorporation of nitrogen in stream detritus

Science.gov (United States)

Diane M. Sanzone; Jennifer L. Tank; Judy L. Meyer; Patrick J. Mulholland; Stuart E.G. Findlay

2001-01-01

We adapted the chloroform fumigation method to determine microbial nitrogen (N) and microbial incorporation of 15N on three common substrates [leaves, wood and fine benthic organic matter (FBOM)] in three forest streams. We compared microbial N and 15 content of samples collected during a 6-week15N-NH...

Incorporating groundwater flow into the WEPP model

Science.gov (United States)

William Elliot; Erin Brooks; Tim Link; Sue Miller

2010-01-01

The water erosion prediction project (WEPP) model is a physically-based hydrology and erosion model. In recent years, the hydrology prediction within the model has been improved for forest watershed modeling by incorporating shallow lateral flow into watershed runoff prediction. This has greatly improved WEPP's hydrologic performance on small watersheds with...

33 CFR 96.130 - Incorporation by reference.

Science.gov (United States)

2010-07-01

... (ISM) Code by Administrations, November 23, 1995—96.320, 96.440 Resolution A.739(18), Guidelines for.../code_of_federal_regulations/ibr_locations.html. (b) The material approved for incorporation by...), International Management Code for the Safe Operation of Ships and for Pollution Prevention, November 4, 1993—96...

Audit incorporating avoidability and appropriate intervention can ...

African Journals Online (AJOL)

Audit incorporating avoidability and appropriate intervention can significantly decrease perinatal mortality. H. R. G. Ward, G. R. Howarth, O. J. N. Jennings,. R. C. Pattinson .... 6 months) and seven interns. The study was .... maternity care notes study: a randomized control trial to assess the effects of giving expectant mothers ...

Assessing Natural Isothiocyanate Air Emissions after Field Incorporation of Mustard Cover Crop

Energy Technology Data Exchange (ETDEWEB)

Trott, Donna M.; LePage, Jane; Hebert, Vincent

2012-01-01

A regional air assessment was performed to characterize volatile natural isothiocyanate (NITC) compounds in air during soil incorporation of mustard cover crops in Washington State. Field air sampling and analytical methods were developed specific to three NITCs known to be present in air at appreciable concentrations during/after field incorporation. The maximum observed concentrations in air for the allyl, benzyl, and phenethyl isothiocyanates were respectively 188, 6.1, and 0.7 lg m-3 during mustard incorporation. Based on limited inhalation toxicity information, airborne NITC concentrations did not appear to pose an acute human inhalation exposure concern to field operators and bystanders.

Energetics of Mg incorporation at GaN(0001) and GaN(0001¯) surfaces

Science.gov (United States)

Sun, Qiang; Selloni, Annabella; Myers, T. H.; Doolittle, W. Alan

2006-04-01

By using density functional calculations in the generalized gradient approximation, we investigate the energetics of Mg adsorption and incorporation at GaN(0001) and GaN(0001¯) surfaces under various Ga and Mg coverage conditions as well as in presence of light or electron beam-induced electronic excitation. We find significant differences in Mg incorporation between Ga- and N-polar surfaces. Mg incorporation is easier at the Ga-polar surface, but high Mg coverages are found to cause important distortions which locally change the polarity from Ga to N polar. At the N-rich and moderately Ga-rich GaN(0001) surface, 0.25 ML of Mg substituting Ga in the top bilayer strongly reduce the surface diffusion barriers of Ga and N adatoms, in agreement with the surfactant effect observed in experiments. As the Mg coverage exceeds 0.5 ML, partial incorporation in the subsurface region (second bilayer) becomes favorable. A surface structure with 0.5 ML of incorporated Mg in the top bilayer and 0.25 ML in the second bilayer is found to be stable over a wide range of Ga chemical potential. At the Ga bilayer-terminated GaN(0001) surface, corresponding to Ga-rich conditions, configurations where Mg is incorporated in the interface region between the metallic Ga bilayer and the underlying GaN bilayer appear to be favored. At the N-polar surface, Mg is not incorporated under N-rich or moderately Ga-rich conditions, whereas incorporation in the adlayer may take place under Ga-rich conditions. In the presence of light or electron beam induced excitation, energy differences between Mg incorporated at the surface and in deeper layers are reduced so that the tendency toward surface segregation is also reduced.

Calculation of cell production from [3H]Thymidine incorporation with freshwater bacteria

International Nuclear Information System (INIS)

Smits, J.D.; Riemann, B.

1988-01-01

The conversion factor for the calculation of bacterial production from rates of [ 3 H]thymidine incorporation was examined with diluted batch cultures of freshwater bacteria. Natural bacterial assemblages were grown in aged, normal, and enriched media at 10 to 20 degree C. The generation time during 101 growth cycles covered a range from 4 to >200 h. The average conversion factor was 2.15 x 10 18 cells mol -1 of thymidine incorporated into the trichloroacetic acid (TCA) precipitate, when the generation time exceeded 20 h. At generation times of 18 cells mol -1 of thymidine incorporated into TCA precipitate. The amount of radioactivity in purified DNA increased with decreasing generation time and increasing conversion factor (calculated from the TCA precipitate), corresponding to a decrease in the percentage in protein. The conversion factors calculated from purified DNA or from the TCA precipitate gave the same variability. Conversion factors did not change significantly with the medium, but were significantly higher at 20 degree C that at 15 and 10 degree C. Results suggests that incorporation of [ 3 H]thymidine into DNA is probably limited by uptake during period with generation times of 18 cells mol -1 of thymidine incorporated is used

From Unnatural Amino Acid Incorporation to Artificial Metalloenzymes

KAUST Repository

Makki, Arwa

2016-01-01

This thesis explores a novel strategy based on the site-selective incorporation of unnatural, metal binding amino acids into a host protein. The unnatural amino acids can either serve directly as metal binding centers can

True dose from incorporated activities. Models for internal dosimetry

International Nuclear Information System (INIS)

Breustedt, B.; Eschner, W.; Nosske, D.

2012-01-01

The assessment of doses after incorporation of radionuclides cannot use direct measurements of the doses, as for example dosimetry in external radiation fields. The only observables are activities in the body or in excretions. Models are used to calculate the doses based on the measured activities. The incorporated activities and the resulting doses can vary by more than seven orders of magnitude between occupational and medical exposures. Nevertheless the models and calculations applied in both cases are similar. Since the models for the different applications have been developed independently by ICRP and MIRD different terminologies have been used. A unified terminology is being developed. (orig.)

Incorporating ligament laxity in a finite element model for the upper cervical spine.

Science.gov (United States)

Lasswell, Timothy L; Cronin, Duane S; Medley, John B; Rasoulinejad, Parham

2017-11-01

Predicting physiological range of motion (ROM) using a finite element (FE) model of the upper cervical spine requires the incorporation of ligament laxity. The effect of ligament laxity can be observed only on a macro level of joint motion and is lost once ligaments have been dissected and preconditioned for experimental testing. As a result, although ligament laxity values are recognized to exist, specific values are not directly available in the literature for use in FE models. The purpose of the current study is to propose an optimization process that can be used to determine a set of ligament laxity values for upper cervical spine FE models. Furthermore, an FE model that includes ligament laxity is applied, and the resulting ROM values are compared with experimental data for physiological ROM, as well as experimental data for the increase in ROM when a Type II odontoid fracture is introduced. The upper cervical spine FE model was adapted from a 50th percentile male full-body model developed with the Global Human Body Models Consortium (GHBMC). FE modeling was performed in LS-DYNA and LS-OPT (Livermore Software Technology Group) was used for ligament laxity optimization. Ordinate-based curve matching was used to minimize the mean squared error (MSE) between computed load-rotation curves and experimental load-rotation curves under flexion, extension, and axial rotation with pure moment loads from 0 to 3.5 Nm. Lateral bending was excluded from the optimization because the upper cervical spine was considered to be primarily responsible for flexion, extension, and axial rotation. Based on recommendations from the literature, four varying inputs representing laxity in select ligaments were optimized to minimize the MSE. Funding was provided by the Natural Sciences and Engineering Research Council of Canada as well as GHMBC. The present study was funded by the Natural Sciences and Engineering Research Council of Canada to support the work of one graduate student

Computer simulation with TRNSYS for a mobile refrigeration system incorporating a phase change thermal storage unit

International Nuclear Information System (INIS)

Liu, Ming; Saman, Wasim; Bruno, Frank

2014-01-01

Highlights: • A mobile refrigeration system incorporating phase change thermal storage was simulated using TRNSYS. • A TRNSYS component of a phase change thermal storage unit was created and linked to other components from TRNSYS library. • The temperature in the refrigerated space can be predicted using this TRNSYS model under various conditions. • A mobile refrigeration system incorporating PCM and an off-peak electric driven refrigeration unit is feasible. • The phase change material with the lowest melting temperature should be selected. - Abstract: This paper presents a new TRNSYS model of a refrigeration system incorporating phase change material (PCM) for mobile transport. The PCTSU is charged by an off-vehicle refrigeration unit and the PCM provides cooling when discharging and the cooling released is utilized to cool down the refrigerated space. The advantage of this refrigeration system compared to a conventional system is that it consumes less energy and produces significantly lower greenhouse gas emissions. A refrigeration system for a typical refrigerated van is modelled and simulations are performed with climatic data from four different locations. The main components of the TRNSYS model are Type 88 (cooling load estimation) and Type 300 (new PCTSU component), accompanied by other additional components. The results show that in order to maintain the temperature of the products at −18 °C for 10 h, a total of 250 kg and 390 kg of PCM are required for no door opening and 20 door openings during the transportation, respectively. In addition, a parametric study is carried out to evaluate the effects of location, size of the refrigerated space, number of door openings and melting temperature of the PCM on the thermal performance

Incorporating Political Socialization Theory into Baccalaureate Nursing Education.

Science.gov (United States)

Brown, Sandra Godman

1996-01-01

Nurses must incorporate a political component into their professional role identity to meet the future challenges of the health care system. Political socialization theory can assist faculty in adding a political thread to the curriculum. (SK)

75 FR 70235 - Access to Confidential Business Information by Industrial Economics, Incorporated

Science.gov (United States)

2010-11-17

... Industrial Economics, Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Access to Data and Request for Comments. SUMMARY: EPA will authorize its contractor, Industrial Economics... Contracts Nos. GS-10F-0061N (EP10H000898) and EP-W-06- 065/0013, Industrial Economics, Incorporated (IEc...

75 FR 1053 - Access to Confidential Business Information by Industrial Economics, Incorporated

Science.gov (United States)

2010-01-08

... Industrial Economics, Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Access to Data and Request for Comments. SUMMARY: EPA will authorize its contractor, Industrial Economics... Contracts No. EP-W-6-065 and EP07H000213, Industrial Economics, Incorporated (IEc) will assist the Office of...

Incorporating intelligence into structured radiology reports

Science.gov (United States)

Kahn, Charles E.

2014-03-01

The new standard for radiology reporting templates being developed through the Integrating the Healthcare Enterprise (IHE) and DICOM organizations defines the storage and exchange of reporting templates as Hypertext Markup Language version 5 (HTML5) documents. The use of HTML5 enables the incorporation of "dynamic HTML," in which documents can be altered in response to their content. HTML5 documents can employ JavaScript, the HTML Document Object Model (DOM), and external web services to create intelligent reporting templates. Several reporting templates were created to demonstrate the use of scripts to perform in-template calculations and decision support. For example, a template for adrenal CT was created to compute contrast washout percentage from input values of precontrast, dynamic postcontrast, and delayed adrenal nodule attenuation values; the washout value can used to classify an adrenal nodule as a benign cortical adenoma. Dynamic templates were developed to compute volumes and apply diagnostic criteria, such as those for determination of internal carotid artery stenosis. Although reporting systems need not use a web browser to render the templates or their contents, the use of JavaScript creates innumerable opportunities to construct highly sophisticated HTML5 reporting templates. This report demonstrates the ability to incorporate dynamic content to enhance the use of radiology reporting templates.

49 CFR 572.160 - Incorporation by reference.

Science.gov (United States)

2010-10-01

... Six-Year-Old Weighted Child Test Dummy § 572.160 Incorporation by reference. (a) The following... package entitled “Parts List and Drawings, Part 572 Subpart S, Hybrid III Weighted Six-Year Old Child Test... part of a complete dummy assembly; (iii) Drawing No. 167-2020 Revision A, dated December 8, 2005, Spine...

Bruce Power's nuclear pressure boundary quality assurance program requirements, implementation and transition

International Nuclear Information System (INIS)

Krane, J.C.

2009-01-01

The development of a full scope nuclear pressure boundary quality assurance program in Canada requires extensive knowledge of the structure and detailed requirements of codes and standards published by the Canadian Standards Association (CSA) and American Society of Mechanical Engineers (ASME). Incorporation into company governance documents and implementation of these requirements while managing the transition to more recent revisions of these codes and standards represents a significant challenge for Bruce Power, Canada's largest independent nuclear operator. This paper explores the key developments and innovative changes that are used to ensure successful regulatory compliance and effective implementation of the Bruce Power Pressure Boundary Quality Assurance Program. Challenges and mitigating strategies to sustain this large compliance based program at Bruce Power's 8 unit nuclear power plant site will also be detailed. (author)

IN SITU AND POST REACTION COBALT-INCORPORATION INTO ...

African Journals Online (AJOL)

Thermogravimetric analysis and Raman spectroscopy show that the surfactant is removed by solvent extraction. Cobalt ion incorporation is confirmed by Raman spectroscopy and UV-vis diffuse reflectance spectroscopy. KEY WORDS: Bifunctional periodic mesoporous organosilica, 1,2-bistrimethoxysilylethane, ...

Investigating the Incorporation of Personality Constructs into IMPRINT

National Research Council Canada - National Science Library

Dickason, David; Sargent, Bob; Bagnall, Tim

2009-01-01

... in the Army, for use in Navy ship acquisitions. The objective of this study was to determine if it was feasible to incorporate non-cognitive attributes such as stress tolerance into IMPRINT for use as human performance moderators...

Plasmodium falciparum: assessment of in vitro growth by [3H]hypoxanthine incorporation

International Nuclear Information System (INIS)

Chulay, J.D.; Haynes, J.D.; Diggs, C.L.

1983-01-01

To evaluate rapidly Plasmodium falciparum growth in Vitro, [ 3 H]hypoxanthine was added to parasite microcultures and radioisotope incorporation was measured. When culture parameters were carefully controlled, [ 3 H]hypoxanthine incorporation was proportional to the number of parasitized erythrocytes present. Factors affecting [ 3 H]hypoxanthine incorporation included initial parasitemia, duration of culture, duration of radioisotope pulse, parasite stage, concentration of uninfected erythrocytes, the use of serum or plasma to supplement growth, and the concentration of a variety of purines in the culture medium. The method described can be used to measure inhibition of P. falciparum growth by immune serum and has previously been used to study antimalarial drug activity in vitro

Stable isotope labeling, in vivo, of D- and L-tryptophan pools in lemna gibba and the low incorporation of label into indole-3-acetic acid

International Nuclear Information System (INIS)

Baldi, B.G.; Maher, B.R.; Slovin, J.P.; Cohen, J.D.

1991-01-01

The authors present evidence that the role of tryptophan and other potential intermediates in the pathways that could lead to indole derivatives needs to be reexamined. Two lines of Lemna gibba were tested for uptake of [ 15 N-indole]-labeled tryptophan isomers and incorporation of that label into free indole-3-acetic acid (IAA). Both lines required levels of L-[ 15 N]tryptophan 2 to 3 orders of magnitude over endogenous levels in order to obtain measurable incorporation of label into IAA. Labeled L-tryptophan was extractable from plant tissue after feeding and showed no measurable isomerization into D-tryptophan. D-[ 15 N]trytophan supplied to Lemna at rates of approximately 400 times excess of endogenous D-tryptophan levels (to yield an isotopic enrichment equal to that which allowed detection of the incorporation of L-tryptophan into IAA), did not result in measurable incorporation of label into free IAA. These results demonstrate that L-tryptophan is a more direct precursor to IAA than the D isomer and suggest (a) that the availability of tryptophan in vivo is not a limiting factor in the biosynthesis of IAA, thus implying that other regulatory mechanisms are in operation and (b) that L-tryptophan also may not be a primary precursor to IAA in plants

Selective Incorporation of Nitrile-Based Infrared Probes into Proteins via Cysteine Alkylation

OpenAIRE

Jo, Hyunil; Culik, Robert M.; Korendovych, Ivan V.; DeGrado, William F.; Gai, Feng

2010-01-01

The nitrile stretching vibration is increasingly used as a sensitive infrared probe of local protein environments. However, site-specific incorporation of a nitrile moiety into proteins is difficult. Here we show that various aromatic nitriles can be easily incorporated into peptides and proteins via either thiol alkylation or arylation reaction.

The Incorporation of Quality Attributes into Online Course Design in Higher Education

Science.gov (United States)

Lenert, Kathleen Anne; Diane P. Janes

2017-01-01

A survey was designed incorporating questions on 28 attributes (compiled through a literature review) and considered to be quality features in online academic courses in higher education. This study sought to investigate the ongoing practice of instructional designers and instructors in the United States with respect to their incorporation of…

Structural incorporation of Neptunyl(V) into Calcite: Interfacial Reactions and Kinetics

OpenAIRE

Heberling, Frank

2010-01-01

In this experimental work the calcite-water interface is characterized by means of zetapotential and surface diffraction measurements. Based on the experimental results a new Basic Stern Surface Complexation model for calcite is developed. Neptunyl(V) adsorption at the calcite surface and incorporation into the calcite structure is studied by batch type adsorption- and mixed flow reactor experiments. Adsorption and incorporation species of Neptunyl are investigated by EXAFS spectroscopy.

78 FR 55230 - Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental...

Science.gov (United States)

2013-09-10

...\\ including the regulation of workplace safety and health.\\2\\ The Coast Guard's regulatory authority extends... 147 [Docket No. USCG-2012-0779] RIN 1625-AC05 Safety and Environmental Management System Requirements... a vessel-specific Safety and Environmental Management System (SEMS) that incorporates the management...

Regional cerebral palmitate incorporation following transient bilateral carotid occlusion in awake gerbils

Energy Technology Data Exchange (ETDEWEB)

Tone, O.; Miller, J.C.; Bell, J.M.; Rapoport, S.I.

1987-11-01

(/sup 14/C)Palmitate was injected intravenously in awake gerbils at various times after 5 minutes of bilateral carotid artery occlusion or a sham operation. Regional rates of incorporation of plasma palmitate into the hippocampus and other regions of the anterior circulation were determined relative to the mean rate of incorporation into regions of the posterior circulation using quantitative autoradiography and a ratio method of analysis. One day after bilateral carotid occlusion, relative palmitate incorporation was elevated significantly by 16% in the CA4 pyramidal cell layer and by 20% in the dentate gyrus of the hippocampus compared with sham-operated gerbils. At 3 days, significant elevations of this magnitude were found in the CA3 and CA4 cell layers, whereas relative incorporation was reduced by 26% in the CA1 pyramidal cell layer. At 7 days, the only significant difference from control was a 15% elevated incorporation in the CA3 pyramidal cell layer. Histologic examination indicated substantial cell death in the CA1 pyramidal layer at 3 days, with extensive glial reaction and phagocytic invasion at 7 days. Our results suggest that the turnover of palmitate-containing lipids is reduced in the CA1 layer of the gerbil hippocampus but that lipid synthesis is stimulated in hippocampal regions (CA3, CA4, dentate gyrus) affected by but recovering from transient bilateral carotid occlusion.

Regional cerebral palmitate incorporation following transient bilateral carotid occlusion in awake gerbils

International Nuclear Information System (INIS)

Tone, O.; Miller, J.C.; Bell, J.M.; Rapoport, S.I.

1987-01-01

[ 14 C]Palmitate was injected intravenously in awake gerbils at various times after 5 minutes of bilateral carotid artery occlusion or a sham operation. Regional rates of incorporation of plasma palmitate into the hippocampus and other regions of the anterior circulation were determined relative to the mean rate of incorporation into regions of the posterior circulation using quantitative autoradiography and a ratio method of analysis. One day after bilateral carotid occlusion, relative palmitate incorporation was elevated significantly by 16% in the CA4 pyramidal cell layer and by 20% in the dentate gyrus of the hippocampus compared with sham-operated gerbils. At 3 days, significant elevations of this magnitude were found in the CA3 and CA4 cell layers, whereas relative incorporation was reduced by 26% in the CA1 pyramidal cell layer. At 7 days, the only significant difference from control was a 15% elevated incorporation in the CA3 pyramidal cell layer. Histologic examination indicated substantial cell death in the CA1 pyramidal layer at 3 days, with extensive glial reaction and phagocytic invasion at 7 days. Our results suggest that the turnover of palmitate-containing lipids is reduced in the CA1 layer of the gerbil hippocampus but that lipid synthesis is stimulated in hippocampal regions (CA3, CA4, dentate gyrus) affected by but recovering from transient bilateral carotid occlusion

Evaluation of finger millet incorporated noodles for nutritive value and glycemic index.

Science.gov (United States)

Shukla, Kamini; Srivastava, Sarita

2014-03-01

The present study was undertaken to develop finger millet incorporated noodles for diabetic patients. Finger millet variety VL-149 was taken. The finger millet flour and refined wheat flour (RWF) were evaluated for nutrient composition. The finger millet flour (FMF) was blended in various proportions (30 to 50%) in refined wheat flour and used for the preparation of noodles. Control consisted of RWF noodles. Sensory quality and nutrient composition of finger millet noodles was evaluated. The 30% finger millet incorporated noodles were selected best on the basis of sensory evaluation. Noodles in that proportion along with control were evaluated for glycemic response. Nutrient composition of noodles showed that 50% finger millet incorporated noodles contained highest amount of crude fat (1.15%), total ash (1.40%), crude fiber (1.28%), carbohydrate (78.54%), physiological energy (351.36 kcal), insoluble dietary fiber (5.45%), soluble dietary fiber (3.71%), iron (5.58%) and calcium (88.39%), respectively. However, control RWF noodles contained highest amount of starch (63.02%), amylose (8.72%) and amylopectin (54.29%). The glycemic index (GI) of 30% finger millet incorporated noodles (best selected by sensory evaluation) was observed significantly lower (45.13) than control noodles (62.59). It was found that finger millet flour incorporated noodles were found nutritious and showed hypoglycemic effect.

TRACER - TRACING AND CONTROL OF ENGINEERING REQUIREMENTS

Science.gov (United States)

Turner, P. R.

1994-01-01

TRACER (Tracing and Control of Engineering Requirements) is a database/word processing system created to document and maintain the order of both requirements and descriptive material associated with an engineering project. A set of hierarchical documents are normally generated for a project whereby the requirements of the higher level documents levy requirements on the same level or lower level documents. Traditionally, the requirements are handled almost entirely by manual paper methods. The problem with a typical paper system, however, is that requirements written and changed continuously in different areas lead to misunderstandings and noncompliance. The purpose of TRACER is to automate the capture, tracing, reviewing, and managing of requirements for an engineering project. The engineering project still requires communications, negotiations, interactions, and iterations among people and organizations, but TRACER promotes succinct and precise identification and treatment of real requirements separate from the descriptive prose in a document. TRACER permits the documentation of an engineering project's requirements and progress in a logical, controllable, traceable manner. TRACER's attributes include the presentation of current requirements and status from any linked computer terminal and the ability to differentiate headers and descriptive material from the requirements. Related requirements can be linked and traced. The program also enables portions of documents to be printed, individual approval and release of requirements, and the tracing of requirements down into the equipment specification. Requirement "links" can be made "pending" and invisible to others until the pending link is made "binding". Individuals affected by linked requirements can be notified of significant changes with acknowledgement of the changes required. An unlimited number of documents can be created for a project and an ASCII import feature permits existing documents to be incorporated

Biochemical properties of Hemigraphis alternata incorporated chitosan hydrogel scaffold.

Science.gov (United States)

Annapoorna, M; Sudheesh Kumar, P T; Lakshman, Lakshmi R; Lakshmanan, Vinoth-Kumar; Nair, Shantikumar V; Jayakumar, R

2013-02-15

In this work, Hemigraphis alternata extract incorporated chitosan scaffold was synthesized and characterized for wound healing. The antibacterial activity of Hemigraphis incorporated chitosan scaffold (HIC) against Escherichia coli and Staphylococcus aureus was evaluated which showed a reduction in total colony forming units by 45-folds toward E. coli and 25-fold against S. aureus respectively. Cell viability studies using Human Dermal Fibroblast cells (HDF) showed 90% viability even at 48 h when compared to the chitosan control. The herbal scaffold made from chitosan was highly haemostatic and antibacterial. The obtained results were in support that the herbal scaffold can be effectively applied for infectious wounds. Copyright © 2012 Elsevier Ltd. All rights reserved.

Estimations of internal dosimetry: practical calculations of incorporated activity

International Nuclear Information System (INIS)

Cortes C, A.

2003-01-01

The National Commission of Nuclear Security and Safeguards (CNSNS) carries out periodically measurements of corporal activity to Occupationally Exposed Personnel (POE) to determine that the received doses are in according to that settled down in the General Regulation of Radiological Security. In this work the results of the incorporated activity estimates starting from the results of the measurements that were carried out in the one CNSNS laboratory are presented, with which it should be determine lastly the internal dose. Its were used different methodologies to estimate the incorporated activity: estimate with isolated data, estimate with global data and method of the best estimate, demonstrating this last to be the more appropriate to determine the internal dose. (Author)

Incorporating direct marketing activity into latent attrition models

NARCIS (Netherlands)

Schweidel, David A.; Knox, George

2013-01-01

When defection is unobserved, latent attrition models provide useful insights about customer behavior and accurate forecasts of customer value. Yet extant models ignore direct marketing efforts. Response models incorporate the effects of direct marketing, but because they ignore latent attrition,

Incorporating Contaminant Bioavailability into Sediment Quality Assessment Frameworks

Science.gov (United States)

The recently adopted sediment quality assessment framework for evaluating bay and estuarine sediments in the State of California incorporates bulk sediment chemistry as a key line of evidence(LOE) but does not address the bioavailability of measured contaminants. Thus, the chemis...

Green chemical incorporation of sulphate into polyoxoanions of ...

Indian Academy of Sciences (India)

Green chemical incorporation of sulphate into polyoxoanions of molybdenum to nano level ... Keywords. Polyoxometalate; green synthesis; nanostructures; surfactant. ... The effects of reaction parameters such as concentration of surfactant, temperature and pH of solution on the synthesis of nanospheres were investigated.

Coumarin incorporated triazoles: a new class of anticonvulsants.

Science.gov (United States)

Bhat, Mashooq A; Al-Omar, Mohammed A

2011-01-01

A series of coumarin incorporated 1,2,4- triazole compounds (1-14) were evaluated for their possible anticonvulsant and neurotoxic properties, log P values, pharmacophoric mapping and three dimensional structure analysis. Compound (6) with para-fluoro substitution showed significant anticonvulsant activity.

Behaviour of high-strength concrete incorporating ground ...

African Journals Online (AJOL)

106. Behaviour of high-strength concrete incorporating ground granulated blast furnace slag at high-temperature. Comportement à haute température du béton à haute résistance à base de laitier granulé de haut fourneau. Imene Saadi*1 & Abdelaziz Benmarce2. 1Laboratoire Matériaux Géométraux et Environnement, ...

Selective Incorporation of Nitrile-Based Infrared Probes into Proteins via Cysteine Alkylation

Science.gov (United States)

Jo, Hyunil; Culik, Robert M.; Korendovych, Ivan V.; DeGrado, William F.; Gai, Feng

2010-01-01

The nitrile stretching vibration is increasingly used as a sensitive infrared probe of local protein environments. However, site-specific incorporation of a nitrile moiety into proteins is difficult. Here we show that various aromatic nitriles can be easily incorporated into peptides and proteins via either thiol alkylation or arylation reaction. PMID:21077670

Towards a functional model of mental disorders incorporating the laws of thermodynamics.

Science.gov (United States)

Murray, George C; McKenzie, Karen

2013-05-01

The current paper presents the hypothesis that the understanding of mental disorders can be advanced by incorporating the laws of thermodynamics, specifically relating to energy conservation and energy transfer. These ideas, along with the introduction of the notion that entropic activities are symptomatic of inefficient energy transfer or disorder, were used to propose a model of understanding mental ill health as resulting from the interaction of entropy, capacity and work (environmental demands). The model was applied to Attention Deficit Hyperactivity Disorder, and was shown to be compatible with current thinking about this condition, as well as emerging models of mental disorders as complex networks. A key implication of the proposed model is that it argues that all mental disorders require a systemic functional approach, with the advantage that it offers a number of routes into the assessment, formulation and treatment for mental health problems. Copyright © 2013 Elsevier Ltd. All rights reserved.

Phospholipid synthesis in the squid giant axon: incorporation of lipid precursors

Energy Technology Data Exchange (ETDEWEB)

Gould, R.M.; Pant, H.; Gainer, H.; Tytell, M.

1983-05-01

The squid giant axon and extruded axoplasm from the giant axon were used to study the capacity of axoplasm for phospholipid synthesis. Extruded axoplasm, suspended in chemically defined media, catalyzed the synthesis of phospholipids from all of the precursors tested. /sup 32/P-Labeled inorganic phosphate and gamma-labeled ATP were actively incorporated into phosphatidylinositol phosphate, while (2-/sup 3/H)myo-inositol and L-(/sup 3/H(G))serine were actively incorporated into phosphatidylinositol and phosphatidylserine, respectively. Though less well utilized. (2-/sup 3/H)glycerol was incorporated into phosphatidic acid, phosphatidylinositol, and triglyceride, and methyl-3H)choline and (1-/sup 3/H)ethanolamine were incorporated into phosphatidylcholine and phosphatidylethanolamine, respectively. Isolated squid giant axons were incubated in artificial seawater containing the above precursors. The axoplasm was extruded following the incubations. Although most of the product lipids were recovered in the sheath (composed of cortical axoplasm, axolemma, and surrounding satellite cells), significant amounts (4-20%) were present in the extruded axoplasm. With tritiated choline and myo-inositol, the major labeled phospholipids found in both the extruded axoplasm and the sheath were phosphatidylcholine and phosphatidylinositol, respectively. With both glycerol and phosphate, phosphatidylethanolamine was a major labeled lipid in both axoplasm and sheath. These findings demonstrate that all classes of phospholipids are formed by endogenous synthetic enzymes in axoplasm. In addition, we feel that the different patterns of incorporation by intact axons and extruded axoplasm indicate that surrounding sheath cells contribute lipids to axoplasm. A comprehensive picture of axonal lipid metabolism should include axoplasmic synthesis and glial-axon transfer as pathways complementing the axonal transport of perikaryally formed lipids.

Boron incorporation into rutile: phase equilibria and structural considerations

Energy Technology Data Exchange (ETDEWEB)

Grey, I.E.; Li, C.; MacRae, C.M. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), East Melbourne, VIC (Australia). Div of Minerals; Bursill, L.A. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1997-06-01

Reduction of rutile in the presence of borate flux stabilised the rutile phase relative to reduced rutiles due to incorporation of boron from the flux. In the presence of borates the rutile phase is stabilised to oxygen fugacities that are lower by almost two orders of magnitude compared with fugacities at the limit of the single-phase rutile phase field in the pure Ti-O system. Boron incorporation is accompanied by reduction of titanium to the trivalent state, according to the charge compensation relation: 3Ti{sup 4+}{identical_to} 3 Ti{sup 3+} + B{sup 3+}. Results of powder X-ray diffraction and transmission electron microscopy studies on samples prepared in the temperature range 1100 to 1300 deg C have been used to establish a model for boron incorporation. It is proposed that at the temperatures studied, local defects in boron doped rutile result from displacement of titanium atoms to adjacent interstitial sites coupled with occupation by boron of the triangular face of the vacated octahedral sites. This atomic grouping represents a small element of the TiBO{sub 3} (calcite-type) structure. Annealing at a lower temperature results in ordering of the local defects to form (101){sub r} planar intergrowths of rutile and calcite-type structures. 14 refs., 3 tabs., 8 figs.

Boron incorporation into rutile: phase equilibria and structural considerations

International Nuclear Information System (INIS)

Grey, I.E.; Li, C.; MacRae, C.M.; Bursill, L.A.

1997-01-01

Reduction of rutile in the presence of borate flux stabilised the rutile phase relative to reduced rutiles due to incorporation of boron from the flux. In the presence of borates the rutile phase is stabilised to oxygen fugacities that are lower by almost two orders of magnitude compared with fugacities at the limit of the single-phase rutile phase field in the pure Ti-O system. Boron incorporation is accompanied by reduction of titanium to the trivalent state, according to the charge compensation relation: 3Ti 4+ ≡ 3 Ti 3+ + B 3+ . Results of powder X-ray diffraction and transmission electron microscopy studies on samples prepared in the temperature range 1100 to 1300 deg C have been used to establish a model for boron incorporation. It is proposed that at the temperatures studied, local defects in boron doped rutile result from displacement of titanium atoms to adjacent interstitial sites coupled with occupation by boron of the triangular face of the vacated octahedral sites. This atomic grouping represents a small element of the TiBO 3 (calcite-type) structure. Annealing at a lower temperature results in ordering of the local defects to form (101) r planar intergrowths of rutile and calcite-type structures. 14 refs., 3 tabs., 8 figs

The effect of clay incorporation on the mechanical properties of fluoroelastomer

International Nuclear Information System (INIS)

Zen, Heloisa Augusto; Oliveira, Jonathan Pereira de; Lugao, Ademar Benevolo

2015-01-01

In this work was studied the effect of clay incorporation in the mechanical properties of fluoroelastomer (FKM). The polymer matrix that was used is a compound of the commercial terpolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene, with 70% of fluor content. This type of polymer is known for its resistance to high temperature and chemical products; it has low fuel permeation which allowing be used as sealant and especially as o-ring product. The incorporation of clay was carried to avoid excessive swelling and to observe the effect in the mechanical properties, for this application was used commercial clay, Cloisite® at 1 and 2% in weigh. The incorporation of clay into the FKM was carried out in a two roll cylinder. After that, the samples with and without clay loading were submitted to gamma radiation at 20 kGy in order to observe the changes in the polymer matrix. The characterization techniques used were: mechanical testes (stress - strain), rheometric properties and degree of swelling. After radiation process, was observed an increase in the swelling degree for the irradiated samples in relation to the pristine one. The incorporated samples with 1 and 2% of clay showed an increase in the elongation which can indicate a decrease in hardness of the polymer matrix. (author)

An enzyme-linked immunosorbent assay for bromodeoxyuridine incorporation using fixed microcultures

International Nuclear Information System (INIS)

Muir, D.; Varon, S.; Manthorpe, M.

1990-01-01

We report a quantitative method by which a single microculture can be examined for cell morphology; cell number; DNA synthesis; and expression of cell antigens. This method first involves measuring by enzyme-linked immunosorbent assay (ELISA) the total bromodeoxyuridine (BrdU) incorporation into DNA by monolayer microcultures. The BrdU-ELISA measurement was followed by simultaneous immunostaining for BrdU-positive nuclei and for a cytoplasmic antigen. The method was applied to the measurement of mitogen-induced proliferation of rat sciatic nerve Schwann cell and cerebral astroglia microcultures. The ELISA measurement of BrdU incorporation compares favorably with measurements of tritiated thymidine incorporation and offers the additional advantages that the same microculture can subsequently be examined for cell number, for cell morphology, and for the percentage of cells having BrdU-labeled nuclei and other antigens

An enzyme-linked immunosorbent assay for bromodeoxyuridine incorporation using fixed microcultures

Energy Technology Data Exchange (ETDEWEB)

Muir, D.; Varon, S.; Manthorpe, M. (Univ. of California, San Diego, La Jolla (USA))

1990-03-01

We report a quantitative method by which a single microculture can be examined for cell morphology; cell number; DNA synthesis; and expression of cell antigens. This method first involves measuring by enzyme-linked immunosorbent assay (ELISA) the total bromodeoxyuridine (BrdU) incorporation into DNA by monolayer microcultures. The BrdU-ELISA measurement was followed by simultaneous immunostaining for BrdU-positive nuclei and for a cytoplasmic antigen. The method was applied to the measurement of mitogen-induced proliferation of rat sciatic nerve Schwann cell and cerebral astroglia microcultures. The ELISA measurement of BrdU incorporation compares favorably with measurements of tritiated thymidine incorporation and offers the additional advantages that the same microculture can subsequently be examined for cell number, for cell morphology, and for the percentage of cells having BrdU-labeled nuclei and other antigens.

Working with LGBT Individuals: Incorporating Positive Psychology into Training and Practice

Science.gov (United States)

Lytle, Megan C.; Vaughan, Michelle D.; Rodriguez, Eric M.; Shmerler, David L.

2014-01-01

This paper examines how positive psychology principles can be incorporated into clinical training and practice to work with lesbian, gay, bisexual and transgender (LGBT) clients. LGBT psychology literature has all too often relied on heterosexual and cisgender reference groups as the norm with respect to psychological health, primarily framing the experiences of LGBT individuals through the lens of psychopathology. As a result, strengths that could be ascribed to the LGBT experience have been overlooked within training and practice. While positive psychology is actively being incorporated into clinical and counseling psychology curricula, broadening the paradigm to include LGBT individuals has generally not been included in the discussion. Specific recommendations for training psychologists to incorporate and foster positive social institutions, positive subjective experiences and character strengths when working with LGBT clients and celebrating their unique experiences are provided. PMID:25544947

Evidence for the incorporation of lead into barite from waste rock pile materials

Energy Technology Data Exchange (ETDEWEB)

COURTIN-NOMADE, ALEXANDRA; SOUBRAND-COLIN, MARILYNE; MARCUS, MATTHEW A.; FAKRA, SIRINE .C

2008-01-21

Because Pb is one of the most toxic elements and is found as a major contaminant in mining environments, this study aims to identify the distribution of this element in host phases issued from the alteration of mine wastes. The sampling location was a former mine near Oakland, California (USA). This mine was once a source of sulfide minerals from which sulfuric acid was made. The material discussed in this paper was collected in iron hardpans that were formed within the waste rock pile resulting from the excavation work. In most contaminated environments (soils, mine waste), secondary metal-bearing phases arising from alteration processes are usually fine-grained (from 10 {micro}m to less than 1 {micro}m) and highly heterogeneous, requiring the use of micron-scale techniques. We performed micro-Raman spectroscopy, microscanning X-ray diffraction (SXRD), and microextended X-ray near edge spectroscopy (XANES) to determine the relationships between Pb and a Ba/Fe-rich host phase. Micro-Raman spectroscopy suggests that Pb is preferentially incorporated into barite rather than goethite. Results from micro-Raman experiments show the high sensitivity of this analytical tool to the incorporation of Pb into barite by being especially sensitive to the variations of the S-O bond and showing the characteristic bands due to the contribution of Pb. This association is confirmed and is well-illustrated by micro-SXRD mineral species maps showing the correlation between Pb and barite. Microfocused XANES indicates that Pb is present as Pb{sup 2+}, agreeing with the in situ physicochemical parameters.

40 CFR 174.505 - Bacillus thuringiensis modified Cry3A protein (mCry3A) in corn; exemption from the requirement of...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis modified Cry3A protein (mCry3A) in corn; exemption from the requirement of a tolerance. 174.505 Section 174.505 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS...

A design condition for incorporating human judgement into monitoring systems

International Nuclear Information System (INIS)

Tanaka, K.; Klir, G.J.

1999-01-01

In safety monitoring, there exists an uncertainty situation in which the sensor cannot detect whether or not the monitored object is in danger. For the uncertainty zone identified by a non-homogeneous safety monitoring system that utilizes two types of sensors with different thresholds, operators or experts are expected to judge whether the real state is safe or dangerous on the basis of additional information from a detailed inspection or other related sensors output. However, the activities for inspection performed by relevant humans may require additional cost and introduce inspection errors. The present article proposes two types of an automatic monitoring system not involving any human inspection or a human-machine (H-M) cooperative monitoring system with inspection. In order to compare the systems, an approach based on the Dempster-Shafer theory is proposed as uncertainty analysis by this theory (it is simpler than by the traditional Bayesian approach). By comparing their expected losses as a result of failed dangerous failures or failed safe failures as well as the inspection errors, the condition is determined under which H-M cooperative systems incorporating human judgements are more effective than automatic monitoring systems

Incorporating attitudinal parameter in assessing sustainability of Malaysia manufacturing industry

Science.gov (United States)

Lanang, Wan Nurul Syahirah Wan; Turan, Faiz Mohd; Johan, Kartina

2018-04-01

Numerous companies are accepting sustainability as an organizational peremptory. There is, however, little convergence on how organizations become sustainable. The previous study suggests that a paradigm shift is necessary to incorporate more sustainable ways of thinking, while others advocate that sustainability requires only moderate behavioural changes as in attitude. In addition, it is also suggesting that sustainability develops most effectively when a singular view of sustainability is applied throughout the company; others contend that differentiated views of sustainability emerge within the various subcultures of an organization. The aim of this paper is to analyse the aftermath of considering attitudinal parameter into the initial data, portraying the true nature of personality during the survey. The research presented was carried out with employees from various manufacturing companies with different branches of knowledge and attitude. Survey methodology was employed by building a questionnaire combining Likert-type items, Sustainable Development Goals (SDGs), Green Project Management (GPM) P5 Integration and multiple-option items. The results allow identifying the knowledges and attitudes of the employees in Malaysia context, contributing relevant data in regard to future engagement relating to sustainability and attitudinal parameter.

Blocking of indium incorporation by antimony in III-V-Sb nanostructures

International Nuclear Information System (INIS)

Sanchez, A M; Beltran, A M; Ben, T; Molina, S I; Beanland, R; Gass, M H; De la Pena, F; Walls, M; Taboada, A G; Ripalda, J M

2010-01-01

The addition of antimony to III-V nanostructures is expected to give greater freedom in bandgap engineering for device applications. One of the main challenges to overcome is the effect of indium and antimony surface segregation. Using several very high resolution analysis techniques we clearly demonstrate blocking of indium incorporation by antimony. Furthermore, indium incorporation resumes when the antimony concentration drops below a critical level. This leads to major differences between nominal and actual structures.

Viability of biocompatible and biodegradable seeds production with incorporated radionuclides

International Nuclear Information System (INIS)

Roberto, W.S.; Pereira, M.M.; Vasconcelos, W.L.; Campos, T.P.R.

2000-01-01

The present work aims the development of radioactive seeds, biocompatible and biodegradable, with the objective of adding options in the cancer treatment. The work focus on the production of seeds biodegradable that incorporate radioisotopes with half life inferior than the degradation time of the material. The idea of producing devices with biodegradable materials impregnated with radioisotopes of short half life will offer new possibilities in the cancer treatment, since they can be used following the same procedures of the permanent interstitial brachytherapy, but using degradable materials compatible with the physiological environment. It will be discussed in particular the possible application of these seeds in the treatment of prostate cancer. A review of the subject and a preliminary evaluation of the viability of production of the seeds will be presented. The method of production of the seeds is based on the incorporation of Iodine and Samarium in glass matrixes obtained by sol-gel processing. X-ray fluorescence was done in the samples produced and the incorporation of Iodine and Samarium atoms was confirmed. (author)

Incorporation of ice sheet models into an Earth system model: Focus on methodology of coupling

Science.gov (United States)

Rybak, Oleg; Volodin, Evgeny; Morozova, Polina; Nevecherja, Artiom

2018-03-01

Elaboration of a modern Earth system model (ESM) requires incorporation of ice sheet dynamics. Coupling of an ice sheet model (ICM) to an AOGCM is complicated by essential differences in spatial and temporal scales of cryospheric, atmospheric and oceanic components. To overcome this difficulty, we apply two different approaches for the incorporation of ice sheets into an ESM. Coupling of the Antarctic ice sheet model (AISM) to the AOGCM is accomplished via using procedures of resampling, interpolation and assigning to the AISM grid points annually averaged meanings of air surface temperature and precipitation fields generated by the AOGCM. Surface melting, which takes place mainly on the margins of the Antarctic peninsula and on ice shelves fringing the continent, is currently ignored. AISM returns anomalies of surface topography back to the AOGCM. To couple the Greenland ice sheet model (GrISM) to the AOGCM, we use a simple buffer energy- and water-balance model (EWBM-G) to account for orographically-driven precipitation and other sub-grid AOGCM-generated quantities. The output of the EWBM-G consists of surface mass balance and air surface temperature to force the GrISM, and freshwater run-off to force thermohaline circulation in the oceanic block of the AOGCM. Because of a rather complex coupling procedure of GrIS compared to AIS, the paper mostly focuses on Greenland.

Biotransformation and Incorporation into Proteins along a Simulated Terrestrial Food Chain

Energy Technology Data Exchange (ETDEWEB)

Unrine, J.M., B.P. Jackson and W.A. Hopkins

2007-01-01

Selenium is an essential trace element in vertebrates, but there is a narrow concentration range between dietary requirement and toxicity threshold. Although a great deal is known about the biochemistry of Se from a nutritional perspective, considerably less attention has been focused on the specific biochemistry of Se as an environmental toxicant. Recent advances in hyphenated analytical techniques have provided the capability of quantifying specific chemical forms of Se in biological tissues as well as the distribution of Se among macromolecules. We applied liquid chromatography coupled to inductively coupled plasma mass spectrometry to investigate biotransformations of selenomethionine along a simulated terrestrial food chain consisting of selenomethionine exposed crickets (Acheta domesticus) fed to western fence lizards (Sceloporus occidentalis). Evidence was obtained for selenomethionine biotransformation as well as for sex-specific differences in the metabolism of Se compounds and their subsequent incorporation into proteins in the lizard. The results demonstrate the complexities involved in trophic transfer of Se due to the potential for extensive biotransformation and the species- and even sex-specific nature of these biotransformations.

Application of zein antimicrobial edible film incorporating Zataria ...

African Journals Online (AJOL)

Zein based edible film was developed and incorporated with Zataria multiflora boiss essential oil. Mechanical and microbiological characteristics of this biofilms were measured. Increasing concentration of antimicrobial agent in film reduced stretchability, tensile strength and elongation, however increased the thickness and ...

Spent fuel storage requirements, 1991--2040

International Nuclear Information System (INIS)

1991-12-01

Historical inventories of spent fuel are combined with US Department of Energy (DOE) projections of future discharges from commercial nuclear reactors in the United States to provide estimates of spent fuel storage requirements over the next 50 years, through the year 2040. The needs for storage capacity beyond that presently available in the pools are estimated. These estimates incorporate the maximum capacities within current and planned in-pool storage facilities and any planned transshipments of fuel to other reactors or facilities. Existing and future dry storage facilities are also discussed. Historical data through December 1990 are derived from the 1991 Form RW-859 data survey of nuclear utilities. Projected discharges through the end of reactor life are based on DOE estimates of future nuclear capacity, generation, and spent fuel discharges

Incorporating patient preference into the management of infertility in women with polycystic ovary syndrome

Directory of Open Access Journals (Sweden)

Okoroafor UC

2012-05-01

Full Text Available Ugochi C Okoroafor, Emily S JungheimDepartment of Obstetrics and Gynecology, Washington University, St Louis, MO, USAAbstract: Polycystic ovary syndrome (PCOS is a heterogeneous condition characterized by anovulation, hyperandrogenism, and polycystic ovaries. Because of the heterogeneous nature of PCOS, women affected by the condition often require a customized approach for ovulation induction when trying to conceive. Treating symptoms of PCOS in overweight and obese women should always incorporate lifestyle changes with the goal of weight-loss, as many women with PCOS will ovulate after losing 5%–10% of their body weight. On the other hand, other factors must be considered including the woman’s age, age-related decline in fertility, and previous treatments she may have already tried. Fortunately, multiple options for ovulation induction exist for women with PCOS. This paper reviews specific ovulation induction options available for women with PCOS, the benefits and efficacy of these options, and the related side effects and risks women can anticipate with the various options that may affect treatment adherence. The paper also reviews the recommended evidence-based strategies for treating PCOS-related infertility that allow for incorporation of the patient’s preference. Finally, it briefly reviews emerging data and ongoing studies regarding newer agents that have shown great promise as first-line agents for the treatment of infertility in women with PCOS.Keywords: polycystic ovary syndrome, anovulation, clomiphene citrate, letrozole, metformin, obesity

Baseline requirements for assessment of mining impact using biological monitoring

International Nuclear Information System (INIS)

Humphrey, C.L.; Dostine, P.L.

1995-01-01

Biological monitoring programmes for environmental protection should provide for both early detection of possible adverse effects, and assessment of the ecological significance of these effects. Monitoring techniques are required that include responses sensitive to the impact, that can be subjected to rigorous statistical analysis and for which statistical power is high. Such issues in baseline research of 'what and how to measure?' and 'for how long?' have been the focus of a programme being developed to monitor and assess effects of mining operations on the essentially pristine, freshwater ecosystems of the Alligator Rivers Region (ARR) in tropical northern Australia. Application of the BACIP (Before, After, Control, Impact, Paired differences) design, utilizing a form of temporal replication, to univariate (single species) and multivariate (community) data is described. The BACIP design incorporates data from single control and impact sites. We argue for modification of the design for particular studies conducted in streams, to incorporate additional independent control sites from adjacent catchment. Inferential power, by way of (i) more confidently attributing cause to an observed change and (ii) providing information about the ecological significance of the change, will be enhanced using a modified BACIP design. In highly valued environments such as the ARR, monitoring programmes require application of statistical tests with high power to guarantee that an impact no greater than a prescribed amount has gone undetected. A minimum number of baseline years using the BACIP approach would therefore be required in order to achieve some desired level of statistical power. This paper describes the results of power analyses conducted on 2-5 years (depending upon the technique) of baseline data from streams of the ARR and discuss the implications of these results for management. 44 refs., 1 tab., 3 figs

A new achiral reagent for the incorporation of multiple amino groups into oligonucleotides

DEFF Research Database (Denmark)

Behrens, Carsten; Petersen, Kenneth H.; Egholm, Michael

1995-01-01

The synthesis of a new functionalized achiral linker reagent (10) for the incorporation of multiple primary amino groups into oligonucleotides is described. The linker reagent is compatible with conventional DNA-synthesis following the phosphoramidite methodology, and the linker can be incorporated...

Efficient Production of Hydrogen from Decomposition of Formic Acid over Zeolite Incorporated Gold Nanoparticles

DEFF Research Database (Denmark)

Gallas-Hulin, Agata; Mielby, Jerrik Jørgen; Kegnæs, Søren

2016-01-01

Formic acid has a great potential as a safe and convenient source of hydrogen for sustainable chemical synthesis and renewable energy storage. Here, we report a heterogeneous gold nanoparticles catalyst for efficient production of hydrogen from vapor phase decomposition of formic acid using zeolite...... incorporated gold nanoparticles. The catalyst is prepared by pressure assisted impregnation and reduction (PAIR), which results in a uniform distribution of small gold nanoparticles that are incorporated into zeolite silicalite-1 crystals. Consequently, the incorporated nanoparticles exhibit increased...... sintering stability. Based on these results, we believe that incorporation of metal nanoparticles in zeolites may find use as highly active and selective heterogeneous catalysts for the production of hydrogen in future renewable energy applications....

Hybrid conducting polymer materials incorporating poly-oxo-metalates for extraction of actinides; Materiaux polymeres conducteurs hybrides incorporant des polyoxometallates pour l'extraction d'actinides

Energy Technology Data Exchange (ETDEWEB)

Racimor, D

2003-09-15

The preparation and characterization of hybrid conducting polymers incorporating poly-oxo-metalates for extracting actinides is discussed. A study of the coordination of various lanthanide cations (Ce(III), Ce(IV), Nd(III)) by the mono-vacant poly-oxo-metalate {alpha}{sub 2}-[P{sub 2}W{sub 17}O{sub 61}]{sup 10-} showed significant differences according to the cation.. Various {alpha}-A-[PW{sub 9}O{sub 34}(RPO){sub 2}]{sup 5-} hybrids were synthesized and their affinity for actinides or lanthanides was demonstrated through complexation. The first hybrid poly-oxo-metallic lanthanide complexes were then synthesized, as was the first hybrid functionalized with a pyrrole group. The electro-polymerization conditions of this pyrrole remain still to be optimized. Poly-pyrrole materials incorporating {alpha}{sub 2}-[P{sub 2}W{sub 17}O{sub 61}]{sup 10-} or its neodymium or cerium complexes as doping agents proved to be the first conducting polymer incorporating poly-oxo-metalates capable of extracting plutonium from nitric acid. (author)

Studies on battery storage requirement of PV fed wind-driven induction generators

International Nuclear Information System (INIS)

Rajan Singaravel, M.M.; Arul Daniel, S.

2013-01-01

Highlights: ► Sizing of battery storage for PV fed wind-driven IG system is taken up. ► Battery storage is also used to supply reactive power for wind-driven IG. ► Computation of LPSP by incorporating uncertainties of irradiation and wind speed. ► Sizing of hybrid power system components to ensure zero LPSP. ► Calculated storage size satisfied the constraints and improves battery life. - Abstract: Hybrid stand-alone renewable energy systems based on wind–solar resources are considered to be economically better and reliable than stand-alone systems with a single source. An isolated hybrid wind–solar system has been considered in this work, where the storage (battery bank) is necessary to supply the required reactive power for a wind-driven induction generator (IG) during the absence of power from a photovoltaic (PV) array. In such a scheme, to ensure zero Loss of Power Supply Probability (LPSP) and to improve battery bank life, a sizing procedure has been proposed with the incorporation of uncertainties in wind-speed and solar-irradiation level at the site of erection of the plant. Based on the proposed procedure, the size of hybrid power system components and storage capacity are determined. Storage capacity has been calculated for two different requirements. The first requirement of storage capacity is common to any hybrid scheme, which is; to supply both real and reactive power in the absence of wind and solar sources. The second requirement is to supply reactive power alone for the IG during the absence of photovoltaic power, which is unique to the hybrid scheme considered in this work. Storage capacity calculations for different conditions using the proposed approach, satisfies the constraints of maintaining zero LPSP and also improved cycle life of the battery bank

Radiation exposure from incorporated isotopes

Energy Technology Data Exchange (ETDEWEB)

Beleznay, F [Hungarian Academy of Sciences, Budapest. Central Research Inst. for Physics

1985-01-01

Recommendations for the limitation of the burden of the human body from radiation exposure were developed to avoid direct radiation health damage such that the occurrence of stochastic damage can be held below a resonable risk level. The recommendations, published under ICRP 26 and ICRP 30, contain several guidelines and concepts which are discussed here. They include the primary internal dose exposure limits, secondary and implied limits for the monitoring of internal radiation exposure (Annual Limit of Intake, Derived Air Concentrations). Methods are presented for inspection and monitoring of internal exposure in medical laboratories, inspection of incorporation of sup(131)I and sup(99m)Tc.

Post-mortem 3H-thymidine incorporation in human epidermis and oral mucosa

International Nuclear Information System (INIS)

Schellmann, B.

1981-01-01

Using the 3H-thymidine labelling method, the authors studied post-mortem incorporation activity in the epidermis and oral mucosa of corpses which were stored with their clothes on under conditions of normal room temperature (+20 0 ) and of cooling (+4 0 C). Samples were taken in the form of skin punches at 2 h or 4 h intervals, respec.. Using histo-autoradiograms, the incorporation of 3H-thymidine in dependence from the time interval between the points of time of death and sampling were determined in situe and given as the ratio of labelled cells of the germinative layer per 100 μm length of basement membrane. A linear drop of post-mortem thymidine incorporation rates in epidermis and oral mucosa was found in human corpse skin correlating with increasing temporal distance from the point of time of death. Incorporation rates in the oral mucosa were markedly higher (by a factor of 3 to 5) than those of the epidermis which agrees well with in vivo conditions. No labelling of cell nuclei, i.e. no synthetic activity of the germinative layer, could be detected in the epidermis 35-40 h after individual death at the latest (in the oral mucosa after 45-50 h). However, clear incorporation activities could be observed in the germinative layer of epidermis and oral mucosa after more than 4 d in the case of storage at +4 0 C. (orig./MG) [de

Kinetics of incorporation/redistribution of photosensitizer hypericin to/from high-density lipoproteins.

Science.gov (United States)

Joniova, Jaroslava; Buriankova, Luboslava; Buzova, Diana; Miskovsky, Pavol; Jancura, Daniel

2014-11-20

By means of fluorescence spectroscopy we have studied the kinetics of interaction of a photosensitizer hypericin (Hyp) with high-density lipoproteins (HDL). Hyp is incorporated into HDL molecules as monomer till ratio Hyp/HDL ∼8:1 and above this ratio forms non-fluorescent aggregates. This number is different from that found in the case of Hyp incorporation into low-density lipoprotein (LDL) molecules (8:1 vs 30:1). The difference is mainly attributed to the smaller size of HDL in comparison with LDL molecule. Biphasic kinetics of Hyp association with HDL was observed. The rapid phase of incorporation is completed within seconds, while the slow one lasts several minutes. The kinetics of the association of Hyp molecules with free HDL, Hyp/HDL=10:1 complex and the redistribution of Hyp from Hyp/HDL=70:1 complex to free HDL molecules reveal a qualitative similar characteristics of these processes with those observed for the interaction of Hyp with LDL. However, the incorporation of Hyp into HDL in the "slow" phase is more rapid than to LDL and extend of Hyp penetration into lipoproteins in the fast phase is also much higher in the case of HDL. The lower concentration of cholesterol molecules in outer shell of HDL particles is probably the determining factor for the more rapid kinetics of Hyp incorporation to and redistribution from these molecules when comparing with LDL particles. Copyright © 2014 Elsevier B.V. All rights reserved.

POF based glucose sensor incorporating grating wavelength filters

DEFF Research Database (Denmark)

Hassan, Hafeez Ul; Aasmul, Søren; Bang, Ole

2014-01-01

AND RESEARCH IN POLYMER OPTICAL DEVICES; TRIPOD. Within the domain of TRIPOD, research is conducted on "Plastic Optical Fiber based Glucose Sensors Incorporating Grating Wavelength Filters". Research will be focused to optimized fiber tips for better coupling efficiency, reducing the response time of sensor...

Preparedness and response for a nuclear or radiological emergency. Safety requirements

International Nuclear Information System (INIS)

2004-01-01

industrial, agricultural, medical, research and teaching applications. Facilities using radiation or radioactive material. And satellites and radiothermal generators using radiation sources or reactors. The requirements also cover emergencies arising from radiation sources of an unknown or untraceable origin. The requirements apply to actions in preparedness and response for emergencies involving hazards associated with ionizing radiation only. The requirements do not apply to preparedness or response for emergencies involving hazards associated with non-ionizing radiation such as microwave, ultraviolet or infrared radiation. The IAEA has issued Safety Fundamentals publications relating to nuclear installations and to radioactive waste management. In addition, the IAEA has issued Safety Series and Safety Standards Series publications that have established requirements relating to emergency preparedness for the safe use of radiation sources, the transport of radioactive material, legal and governmental infrastructure, the design and operation of nuclear power plants, and the design and operation of research reactors. This Safety Requirements publication incorporates, elaborates on, augments and structures all the requirements for emergency preparedness and response established in these previously issued safety standards. To this effect some requirements established in these other safety standards have been incorporated as quotations in this publication (revised text is shown in square brackets and omissions are indicated by ellipses). In other cases footnotes state where related requirements have been established

78 FR 21045 - Adaptation of Regulations to Incorporate Swaps-Records of Transactions; Correction

Science.gov (United States)

2013-04-09

... COMMODITY FUTURES TRADING COMMISSION 17 CFR Part 1 RIN 3038-AD53 Adaptation of Regulations to Incorporate Swaps--Records of Transactions; Correction AGENCY: Commodity Futures Trading Commission. ACTION...), regarding Adaptation of Regulations to Incorporate Swaps--Records of Transactions. DATES: This correction to...

Cesium incorporation in hollandite-rich multiphasic ceramic waste forms

Energy Technology Data Exchange (ETDEWEB)

Tumurugoti, P.; Clark, B.M. [Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 (United States); Edwards, D.J. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Amoroso, Jake [Savannah River National Laboratory, Aiken, SC 29808 (United States); Sundaram, S.K. [Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 (United States)

2017-02-15

Hollandite-rich multiphase waste form compositions processed by melt-solidification and spark plasma sintering (SPS) were characterized, compared, and validated for nuclear waste incorporation. Phase identification by x-ray diffraction (XRD) and electron back-scattered diffraction (EBSD) confirmed hollandite as the major phase present in these samples along with perovskite, pyrochlore and zirconolite. Distribution of selected elements observed by wavelength dispersive spectroscopy (WDS) maps indicated that Cs formed a secondary phase during SPS processing, which was considered undesirable. On the other hand, Cs partitioned into the hollandite phase in melt-processed samples. Further analysis of hollandite structure in melt-processed composition by selected area electron diffraction (SAED) revealed ordered arrangement of tunnel ions (Ba/Cs) and vacancies, suggesting efficient Cs incorporation into the lattice.

Incorporation of transuranic elements in titanate nuclear waste ceramics

International Nuclear Information System (INIS)

Matzke, H.J.; Ray, I.L.F.; Theile, H.; Trisoglio, C.; Walker, C.T.; White, T.J.

1990-01-01

The incorporation of actinide elements and their rare-earth element analogues in titanate nuclear waste forms in reviewed. New partitioning data are presented for three waste forms containing Purex waste simulant in combination with either NpO 2 , PuO 2 , or Am 2 O 3 . The greater proportion of transuranics partition between perovskite and zirconolite, while some americium may enter loveringite. Autoradiography revealed clusters of plutonium atoms which have been interpreted as unreacted dioxide or sesquioxide. It is concluded that the solid-state behavior of transuranic elements in titanate waste forms is poorly understood, certainly not well enough to tailor a ceramic for the incorporation of waste from reprocessing of fast breeder reactor fuel in which transuranic species are more abundant than in Purex waste

Junctionless Thin-Film Transistors Gated by an H₃PO₄-Incorporated Chitosan Proton Conductor.

Science.gov (United States)

Liu, Huixuan; Xun, Damao

2018-04-01

We fabricated an H3PO4-incorporated chitosan proton conductor film that exhibited the electric double layer effect and showed a high specific capacitance of 4.42 μF/cm2. Transparent indium tin oxide thin-film transistors gated by H3PO4-incorporated chitosan films were fabricated by sputtering through a shadow mask. The operating voltage was as low as 1.2 V because of the high specific capacitance of the H3PO4-incorporated chitosan dielectrics. The junctionless transparent indium tin oxide thin film transistors exhibited good performance, including an estimated current on/off ratio and field-effect mobility of 1.2 × 106 and 6.63 cm2V-1s-1, respectively. These low-voltage thin-film electric-double-layer transistors gated by H3PO4-incorporated chitosan are promising for next generation battery-powered "see-through" portable sensors.

Antimicrobial and physical properties of chitosan films incorporated with turmeric extract.

Science.gov (United States)

Kalaycıoğlu, Zeynep; Torlak, Emrah; Akın-Evingür, Gülşen; Özen, İlhan; Erim, F Bedia

2017-08-01

In this study, the effects of turmeric extract incorporation on the antibacterial and physical properties of the chitosan films were evaluated. Turmeric containing chitosan-based film was produced with casting procedure and cross-linked with sodium sulfate. Mechanical, optical, thermal properties, and water vapor permeability of the films were studied. The addition of turmeric to chitosan film significantly increased the tensile strength of the film and improved the ultraviolet-visible light barrier of the film. Infrared spectroscopy analysis suggested an interaction between the phenolic compounds of the extract and amin group of chitosan. Antimicrobial activity of the chitosan films was studied against Salmonella and Staphylococcus aureus by plate count agar technique and a better antimicrobial activity was observed with turmeric incorporation. Turmeric incorporated chitosan films with enhanced antimicrobial activity and film stiffness can be suggested as a promising application for food packaging. Copyright © 2017 Elsevier B.V. All rights reserved.

Fluorescent Lamp Glass Waste Incorporation into Clay Ceramic: A Perfect Solution

Science.gov (United States)

Morais, Alline Sardinha Cordeiro; Vieira, Carlos Maurício Fontes; Rodriguez, Rubén Jesus Sanchez; Monteiro, Sergio Neves; Candido, Veronica Scarpini; Ferreira, Carlos Luiz

2016-09-01

The mandatory use of fluorescent lamps as part of a Brazilian energy-saving program generates a huge number of spent fluorescent lamps (SFLs). After operational life, SFLs cannot be disposed as common garbage owing to mercury and lead contamination. Recycling methods separate contaminated glass tubes and promote cleaning for reuse. In this work, glass from decontaminated SFLs was incorporated into clay ceramics, not only as an environmental solution for such glass wastes and clay mining reduction but also due to technical and economical advantages. Up to 30 wt.% of incorporation, a significant improvement in fired ceramic flexural strength and a decrease in water absorption was observed. A prospective analysis showed clay ceramic incorporation as an environmentally correct and technical alternative for recycling the enormous amount of SFLs disposed of in Brazil. This could also be a solution for other world clay ceramic producers, such as US, China and some European countries.

Implementation of bioassay methods to improve assessment of incorporated radionuclides

International Nuclear Information System (INIS)

Oeh, U.; Andrasi, A.; Bouvier-Capely, C.; De Carlan, L.; Fischer, H.; Franck, D.; Hollriegl, V.; Li, W. B.; Ritt, J.; Roth, P.; Schmitzer, Ch; Wahl, W.; Zombori, P.

2007-01-01

The present work which was carried out in the framework of an EU project (IDEA: Internal Dosimetry - Enhancements in Application; Contract Number: FIKR CT2001 00164) shall provide commonly acceptable guidelines for optimum performance of ICP-MS measurements with focus on urinary measurements of uranium, thorium and actinides. From the results of this work it is recommended that, whenever feasible, 24 h urine sampling should be conducted to avoid large uncertainties in the quantitation of daily urinary excretion values. For storage, urine samples should be acidified and kept frozen before analysis. Measurement of total uranium in urine by ICP-MS at physiological levels ( -1 ) requires no sample preparation besides UV photolysis and/or dilution. For the measurement of thorium in urine by ICP-MS, it can be concluded, that salt removal from the urine samples is not recommended. For the measurement of actinides in urine it is shown that ICP-MS is well-suited and a good alternative to alpha-spectrometry for isotopes with T 1/2 > 5 x 10 4 years. In general, ICP-MS measurements are an easy, fast and cost-saving methodology. New improved measuring techniques (HR-SF-ICP-MS) with detection limits in urine of 150 pg l -1 (1.9 μBq l -1 ) for 238 U, 30 pg l -1 (2.4 μBq l -1 ) for 235 U and 100 pg l -1 (0.4 μBq l -1 ) for 232 Th, respectively, meet all necessary requirements. This method should therefore become the routine technique for incorporation monitoring of workers and of members of the general public, in particular for uranium contamination. (authors)

Development and evaluation of garlic incorporated ready-to-eat extruded snacks.

Science.gov (United States)

Haritha, D; Vijayalakshmi, V; Gulla, S

2014-11-01

The present study was carried out to develop and evaluate ready to eat extruded snacks incorporated with garlic powder at various levels (5 %, 10 %, 15 %, 20 %). The organoleptic evaluation was conducted for the developed products and the well accepted products were selected for further studies like physical properties and shelf life (stored at room temperature for 2 months). The organoleptic evaluation of the developed snacks revealed that 15 % and 20 % garlic incorporated snacks were not acceptable due to strong garlic flavor, therefore T1 (control), T2 (5 % garlic) and T3 ( 10 % garlic) were selected for further studies. The physical properties showed significant changes with incorporation of garlic powder at 0 %-10 % level. There was an increase in mass flow rate, tap density and bulk density but decrease in the water holding capacity, oil absorption capacity and expansion ratio. The water soluble index and moisture retention of the products showed the same values for all the three selected treatments. The products were packed by ordinary, nitrogen and vacuum packing and stored for 2 months. It was found that there was an increase in moisture content and microbial load, however the increase was within limits. The increase in the moisture content was low in nitrogen packed products where as the microbial load decreased with increase in the percentage of garlic incorporation. The nitrogen and vacuum packed products showed less microbial load than the ordinary packed products. Garlic powder can be incorporated at 5 and 10 % levels in ready-to-eat extruded snacks with well acceptability and can be stored for a period of 2 months with nitrogen packing as an effective packaging.

Incorporation of radioactive amino acids into protein in isolated rat hepatocytes

International Nuclear Information System (INIS)

Seglin, P.O.

1976-01-01

The incorporation of radioactivity from a 14 C-labelled amino acid mixture (algal protein hydrolysate) into protein in isolated rat hepatocytes has been studied. The incorporation rate declined with increasing cell concentration, an effect which could be explained by isotope consumption, partly (and largely) by isotope dilution due to the formation of non-labelled amino acids by the cells. At a high extracellular amino acid concentration, the rate of incorporation into protein became independent of cell concentration because the isotope dilution effect was now quantitatively insignificant. The time course of protein labelling at various cell concentrations correlated better with the intracellular than with the extracellular amino acid specific activity, suggesting that amino acids for protein synthesis were taken from an intracellular pool. With increasing extracellular amino acid concentrations, both the intracellular amino acid concentration, the intracellular radioactivity and the rate of incorporation into protein increased. Protein labelling exhibited a distinct time lag at high amino acid concentrations, presumable reflecting the time-dependent expansion of the intracellular amino acid pool. The gradual increase in the rate of protein labelling could be due either to an increased intracellular specific activity, or to a real stimulation of protein synthesis by amino acids, depending on whether the total intracellular amino acid pool or just the expandable compartment is the precursor pool for protein synthesis

The Incorporation of Chromium in Rice Straw Fermented with Ganoderma lucidum

Directory of Open Access Journals (Sweden)

F. Agustin

2013-04-01

Full Text Available The research was designed to evaluate chromium incorporation by Ganoderma lucidum in rice straw substrate supplemented with chromium chloride. Treatments were combination of Cr level (0, 500, 1000, 1500, 2000, 25000, and 3000 ppm and fermentation time (0, 2, 3, and 4 wk. The treatments were arranged in a factorial 7 x 4 and allocated in completely randomized design with three replications. G. lucidum was grown in potato dextrose agar (PDA medium for 10 days and was inoculated to the substrate which have been sterilized and mixed with CrCl3.6H2O. The moisture of substrate was maintained at 70%. Fiber and protein components of growth media of G. lucidum was determined and analyzed for their Cr content. The finding result showed that addition of Cr up to 3000 ppm into the substrate stimulated the G. lucidum growth. Chromium was incorporated into the fiber and protein components of the growth substrate of G. lucidum during fermentation. Incorporation of Cr into the protein of substrate containing 3000 ppm Cr was highest when fermented for 4 wk. Protein component of substrate contained 9.29% Cr while in NDF and ADF was 27.20% and 10.55% Cr, respectively. It is concluded that Cr was incorporated into the G. lucidum cells during fermentation.

The necessity of incorporating gynaecological tests in antiretroviral ...

African Journals Online (AJOL)

presenting with cervical cancer despite relatively high. CD4 counts. Discussion. These cases demonstrate the importance and necessity of incorporating simple gynaecological tests and consultations as part of routine examination of HIV- infected women attending care settings. The majority of cervical cancer cases can be ...

49 CFR 393.7 - Matter incorporated by reference.

Science.gov (United States)

2010-10-01

... § 393.104(e). (20) Recommended Standard Specification for Synthetic Web Tiedowns, Web Sling and Tiedown..., 2nd Edition, Wire Rope Technical Board November 1985, incorporation by reference approved for § 393... Composite Rope Specifications, Three-Strand and Eight-Strand Standard Construction, May 1979; (iv) NRS-1...

Forgiveness in Criminal Law through Incorporating Restorative Mediation

NARCIS (Netherlands)

Claessen, Jacques

2017-01-01

In this monograph, the author argues for the integration of the concept of forgiveness into criminal law through incorporating restorative justice practices such as victim-offender mediation. Although forgiveness is not a purpose in itself nor can it be enforced, criminal law should provide room for

Incorporating Sustainability Issues into the Financial Accounting Curriculum

Science.gov (United States)

Haskin, Daniel L.; Burke, Megan M.

2016-01-01

Changes in the views that society holds of capital allocation suggest that sustainability reporting needs to be incorporated into the financial accounting curriculum. This paper reviews the background and history of corporate social responsibility and sustainability reporting and discusses formation of the Sustainability Accounting Standards Board…

40 CFR 194.5 - Publications incorporated by reference.

Science.gov (United States)

2010-07-01

.... Nuclear Regulatory Commission, NUREG-1297 “Peer Review for High-Level Nuclear Waste Repositories... Characterization of High-Level Nuclear Waste Repositories” (excluding section 2.1 (b) and (c)); IBR approved for... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Publications incorporated by reference...

Incorporating Published Autobiographies into the Abnormal Psychology Course.

Science.gov (United States)

Norcross, John C.; Sommer, Robert; Clifford, Jennifer S.

2001-01-01

Explores six methods for incorporating into courses published autobiographies written by individuals suffering from mental disorders: (1) outside readings; (2) examples for classroom lectures; (3) primary texts for discussion sections; (4) remedial or extra-credit assignments; (5) information resources; and (6) source books for topical seminars.…

Enzymatic Incorporation of Modified Purine Nucleotides in DNA.

Science.gov (United States)

Abu El Asrar, Rania; Margamuljana, Lia; Abramov, Mikhail; Bande, Omprakash; Agnello, Stefano; Jang, Miyeon; Herdewijn, Piet

2017-12-14

A series of nucleotide analogues, with a hypoxanthine base moiety (8-aminohypoxanthine, 1-methyl-8-aminohypoxanthine, and 8-oxohypoxanthine), together with 5-methylisocytosine were tested as potential pairing partners of N 8 -glycosylated nucleotides with an 8-azaguanine or 8-aza-9-deazaguanine base moiety by using DNA polymerases (incorporation studies). The best results were obtained with the 5-methylisocytosine nucleotide followed by the 1-methyl-8-aminohypoxanthine nucleotide. The experiments demonstrated that small differences in the structure (8-azaguanine versus 8-aza-9-deazaguanine) might lead to significant differences in recognition efficiency and selectivity, base pairing by Hoogsteen recognition at the polymerase level is possible, 8-aza-9-deazaguanine represents a self-complementary base pair, and a correlation exists between in vitro incorporation studies and in vivo recognition by natural bases in Escherichia coli, but this recognition is not absolute (exceptions were observed). © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Flow cytometric analysis of RNA synthesis by detection of bromouridine incorporation

DEFF Research Database (Denmark)

Larsen, J K; Jensen, Peter Østrup; Larsen, J

2001-01-01

RNA synthesis has traditionally been investigated by a laborious and time-consuming radiographic method involving incorporation of tritiated uridine. Now a faster non-radioactive alternative has emerged, based on immunocytochemical detection. This method utilizes the brominated RNA precursor...... bromouridine, which is taken into a cell, phosphorylated, and incorporated into nascent RNA. The BrU-substituted RNA is detected by permeabilizing the cells and staining with certain anti-BrdU antibodies. This dynamic approach yields information complementing that provided by cellular RNA content analysis...

Incorporating social media into dermatologic education.

Science.gov (United States)

Ko, Lauren N; Rana, Jasmine; Burgin, Susan

2017-10-15

In the current digital age, medical education has slowly evolved from the largely lecture-based teaching style of the past to incorporate more interactive pedagogical techniques, including use of social media. Already used readily by millennial trainees and clinicians, social media can also be used in innovative ways to teach trainees and facilitate continuing education among practicing clinicians. In this commentary, we discuss many learning benefits of social media and review potential pitfalls of employing social media in both trainee and physician dermatological education.

Regulation EM-ER-6. Requirements for the realization of clinical essays to the medical equipments

International Nuclear Information System (INIS)

2015-01-01

This regulation applies to the medical equipment that become incorporated to the stage of clinical trial required for its evaluation and record, for which they are subdued to clinical investigation for the sake of verifying, in conditions specified of use, its functioning, identifying besides any undesirable defect. It extends to manufacturers of medical equipments, Public Health's units where the clinical investigations with those equipments take place and to the rest of the entities of the MINSAP . Its objective is to protect the participating subjects in the clinical investigations; Assuring the conduction of the clinical investigation and specifying the requirements for the conduction of the clinical investigations and the documentation required for it.

Adequacy assessment of composite generation and transmission systems incorporating wind energy conversion systems

Science.gov (United States)

Gao, Yi

development as it permits correlated wind farms to be incorporated in large practical system studies without requiring excessive increases in computer solution time. The procedures described in this thesis for creating monthly and seasonal wind farm models should prove useful in situations where time period models are required to incorporate scheduled maintenance of generation and transmission facilities. There is growing interest in combining deterministic considerations with probabilistic assessment in order to evaluate the quantitative system risk and conduct bulk power system planning. A relatively new approach that incorporates deterministic and probabilistic considerations in a single risk assessment framework has been designated as the joint deterministic-probabilistic approach. The research work described in this thesis illustrates that the joint deterministic-probabilistic approach can be effectively used to integrate wind power in bulk electric system planning. The studies described in this thesis show that the application of the joint deterministic-probabilistic method provides more stringent results for a system with wind power than the traditional deterministic N-1 method because the joint deterministic-probabilistic technique is driven by the deterministic N-1 criterion with an added probabilistic perspective which recognizes the power output characteristics of a wind turbine generator.

Environmental Restoration Program quality system requirements for the Hanford Site

International Nuclear Information System (INIS)

Cote, R.F.

1993-11-01

This document defines the quality system requirements for the US Department of Energy, Richland Operations Office, Environmental Restoration Program at the Hanford Site. The Quality System Requirements (OSR) for the Hanford Site integrates quality assurance requirements from the US Department of Energy Orders, the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement), and applicable industry standards into a single source document for the development of quality systems applicable to the Environmental Restoration Program activities. This document, based on fifteen criteria and divided intro three parts, provides user organizations with the flexibility to incorporate only those criteria and parts applicable to their specific scopes of work. The requirements of this document shall be applied to activities that affect quality based on a graded approach that takes into consideration the risk inherent in, as well as the importance of, specific items, services, and activities in terms of meeting ER Program objectives and customer expectations. The individual quality systems developed in accordance with this document are intended to provide an integrated management control system that assures the conduct of ER Program activities in a manner that protects human health and the environment

75 FR 43557 - TA-W-73,682, Hartford Financial Services Group, Incorporated, Medical Bill Processing and...

Science.gov (United States)

2010-07-26

... Leased Workers From Beeline: Aurora, IL; TA-W-73,682A, Hartford Financial Services Group, Incorporated..., applicable to workers of Hartford Financial Services Group, Incorporated, Medical Bill Processing and Production Center Support, Aurora, Illinois and Hartford Financial Services Group, Incorporated, Medical Bill...

Incorporation of chimeric HIV-SIV-Env and modified HIV-Env proteins into HIV pseudovirions

International Nuclear Information System (INIS)

Devitt, Gerard; Emerson, Vanessa; Holtkotte, Denise; Pfeiffer, Tanya; Pisch, Thorsten; Bosch, Valerie

2007-01-01

Low level incorporation of the viral glycoprotein (Env) into human immunodeficiency virus (HIV) particles is a major drawback for vaccine strategies against HIV/AIDS in which HIV particles are used as immunogen. Within this study, we have examined two strategies aimed at achieving higher levels of Env incorporation into non-infectious pseudovirions (PVs). First, we have generated chimeric HIV/SIV Env proteins containing the truncated C-terminal tail region of simian immunodeficiency virus (SIV)mac239-Env767 stop , which mediates strongly increased incorporation of SIV-Env into SIV particles. In a second strategy, we have employed a truncated HIV-Env protein (Env-Tr752 N750K ) which we have previously demonstrated to be incorporated into HIV virions, generated in infected T-cells, to a higher level than that of Wt-HIV-Env. Although the chimeric HIV/SIV Env proteins were expressed at the cell surface and induced increased levels of cell-cell fusion in comparison to Wt-HIV-Env, they did not exhibit increased incorporation into either HIV-PVs or SIV-PVs. Only Env-Tr752 N750K exhibited significantly higher (threefold) levels of incorporation into HIV-PVs, an improvement, which, although not dramatic, is worthwhile for the large-scale preparation of non-infectious PVs for vaccine studies aimed at inducing Env humoral responses

Revisiting public health preparedness: Incorporating social justice principles into pandemic preparedness planning for influenza.

Science.gov (United States)

Kayman, Harvey; Ablorh-Odjidja, Angela

2006-01-01

Public health professionals are responsible for ensuring the health of the nation, which requires that planners for public health emergencies recognize that not including protection for underserved or marginalized communities poses a risk to the entire population. To assure the protection of these populations in the event of a pandemic outbreak, preparedness planning will benefit from the application of several principles of social justice in assuring the protection of all individuals. This article will review the history between public health and social justice, provide a brief review of pandemic preparedness planning efforts, discuss the importance of and make recommendations for the incorporation of principles of social justice in the development of pandemic preparedness plans, and highlight some of the challenges faced by public health in effectively and equitably meeting its charge to protect the nation's health.

Monoolein lipid phases as incorporation and enrichment materials for membrane protein crystallization.

Directory of Open Access Journals (Sweden)

Ellen Wallace

Full Text Available The crystallization of membrane proteins in amphiphile-rich materials such as lipidic cubic phases is an established methodology in many structural biology laboratories. The standard procedure employed with this methodology requires the generation of a highly viscous lipidic material by mixing lipid, for instance monoolein, with a solution of the detergent solubilized membrane protein. This preparation is often carried out with specialized mixing tools that allow handling of the highly viscous materials while minimizing dead volume to save precious membrane protein sample. The processes that occur during the initial mixing of the lipid with the membrane protein are not well understood. Here we show that the formation of the lipidic phases and the incorporation of the membrane protein into such materials can be separated experimentally. Specifically, we have investigated the effect of different initial monoolein-based lipid phase states on the crystallization behavior of the colored photosynthetic reaction center from Rhodobacter sphaeroides. We find that the detergent solubilized photosynthetic reaction center spontaneously inserts into and concentrates in the lipid matrix without any mixing, and that the initial lipid material phase state is irrelevant for productive crystallization. A substantial in-situ enrichment of the membrane protein to concentration levels that are otherwise unobtainable occurs in a thin layer on the surface of the lipidic material. These results have important practical applications and hence we suggest a simplified protocol for membrane protein crystallization within amphiphile rich materials, eliminating any specialized mixing tools to prepare crystallization experiments within lipidic cubic phases. Furthermore, by virtue of sampling a membrane protein concentration gradient within a single crystallization experiment, this crystallization technique is more robust and increases the efficiency of identifying productive

Transuranium element incorporation into the β-U3O8 uranyl sheet

International Nuclear Information System (INIS)

Miller, M.L.; Burns, P.C.; Ewing, R.C.; Finch, R.J.

1997-01-01

Spent nuclear fuel (SNF) is unstable under oxidizing conditions. Although recent studies have determined the paragenetic sequence for uranium phases that result from the corrosion of SNF, there are only limited data on the potential of alteration phases for the incorporation of transuranium elements. The crystal chemical characteristics of transuranic elements (TUE) are to a certain extent similar to uranium; thus TUE incorporation into the sheets of uranyl oxide hydrate structures can be assessed by examination of the structural details of the β-U 3 O 8 sheet type. The sheets of uranyl polyhedra observed in the crystal structure of β-U 3 O 8 also occur in the mineral billietite, where they alternate with α-U 3 O 8 type sheets. Preliminary crystal structure determinations for the minerals ianthinite, and wyartite, indicate that these phases also contain β-U 3 O 8 type sheets. The β-U 3 O 8 sheet anion topology contains triangular, rhombic, and pentagonal sites in the proportions 2:1:2. In all structures containing β-U 3 O 8 type sheets, the triangular sites are vacant. The pentagonal sites are filled with U 6+ O 2 forming pentagonal bipyramids. The rhombic dipyramids filling the rhombic sites contain U 6+ O 2 in billietite, U 4+ O 2 in β-U 3 O 8 , U 4+ (H 2 O) 2 in ianthinite, and U 4+ O 3 in wyartite-II. Interlayer species include: H 2 O (billietite, wyartite II, and ianthinite), Ba 2+ (billietite) Ca 2+ wyartite II, and Co 3 2- wyartite II; there is no interlayer in β-U 3 O 8 . The similarity of known TUE coordination polyhedra with those of U suggests that the β-U 3 O 8 sheet will accommodate TUE substitution coupled with variations in apical anion configuration and interlayer population providing the required charge balance

Linear energy transfer incorporated intensity modulated proton therapy optimization

Science.gov (United States)

Cao, Wenhua; Khabazian, Azin; Yepes, Pablo P.; Lim, Gino; Poenisch, Falk; Grosshans, David R.; Mohan, Radhe

2018-01-01

The purpose of this study was to investigate the feasibility of incorporating linear energy transfer (LET) into the optimization of intensity modulated proton therapy (IMPT) plans. Because increased LET correlates with increased biological effectiveness of protons, high LETs in target volumes and low LETs in critical structures and normal tissues are preferred in an IMPT plan. However, if not explicitly incorporated into the optimization criteria, different IMPT plans may yield similar physical dose distributions but greatly different LET, specifically dose-averaged LET, distributions. Conventionally, the IMPT optimization criteria (or cost function) only includes dose-based objectives in which the relative biological effectiveness (RBE) is assumed to have a constant value of 1.1. In this study, we added LET-based objectives for maximizing LET in target volumes and minimizing LET in critical structures and normal tissues. Due to the fractional programming nature of the resulting model, we used a variable reformulation approach so that the optimization process is computationally equivalent to conventional IMPT optimization. In this study, five brain tumor patients who had been treated with proton therapy at our institution were selected. Two plans were created for each patient based on the proposed LET-incorporated optimization (LETOpt) and the conventional dose-based optimization (DoseOpt). The optimized plans were compared in terms of both dose (assuming a constant RBE of 1.1 as adopted in clinical practice) and LET. Both optimization approaches were able to generate comparable dose distributions. The LET-incorporated optimization achieved not only pronounced reduction of LET values in critical organs, such as brainstem and optic chiasm, but also increased LET in target volumes, compared to the conventional dose-based optimization. However, on occasion, there was a need to tradeoff the acceptability of dose and LET distributions. Our conclusion is that the

Imperialism and accountability in corporate law: the limitations of incorporation law as a regulatory mechanism

OpenAIRE

Foster, Nicholas HD; Ball, Jane

2006-01-01

This article discusses the limitations of the law incorporating a corporation (‘incorporation law’) as a control or governance mechanism in a world where it is increasingly difficult to prevent corporations choosing the incorporation law which suits them best. It uses as an example of the globalising pressures in this field three important cases on the right of establishment in the European Union.

10 CFR 433.3 - Materials incorporated by reference.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Materials incorporated by reference. 433.3 Section 433.3 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR THE DESIGN AND...) 741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations...

Incorporating Oracle on-line space management with long-term archival technology

Science.gov (United States)

Moran, Steven M.; Zak, Victor J.

1996-01-01

The storage requirements of today's organizations are exploding. As computers continue to escalate in processing power, applications grow in complexity and data files grow in size and in number. As a result, organizations are forced to procure more and more megabytes of storage space. This paper focuses on how to expand the storage capacity of a Very Large Database (VLDB) cost-effectively within a Oracle7 data warehouse system by integrating long term archival storage sub-systems with traditional magnetic media. The Oracle architecture described in this paper was based on an actual proof of concept for a customer looking to store archived data on optical disks yet still have access to this data without user intervention. The customer had a requirement to maintain 10 years worth of data on-line. Data less than a year old still had the potential to be updated thus will reside on conventional magnetic disks. Data older than a year will be considered archived and will be placed on optical disks. The ability to archive data to optical disk and still have access to that data provides the system a means to retain large amounts of data that is readily accessible yet significantly reduces the cost of total system storage. Therefore, the cost benefits of archival storage devices can be incorporated into the Oracle storage medium and I/O subsystem without loosing any of the functionality of transaction processing, yet at the same time providing an organization access to all their data.

Incorporating functional inter-relationships into protein function prediction algorithms

Directory of Open Access Journals (Sweden)

Kumar Vipin

2009-05-01

Full Text Available Abstract Background Functional classification schemes (e.g. the Gene Ontology that serve as the basis for annotation efforts in several organisms are often the source of gold standard information for computational efforts at supervised protein function prediction. While successful function prediction algorithms have been developed, few previous efforts have utilized more than the protein-to-functional class label information provided by such knowledge bases. For instance, the Gene Ontology not only captures protein annotations to a set of functional classes, but it also arranges these classes in a DAG-based hierarchy that captures rich inter-relationships between different classes. These inter-relationships present both opportunities, such as the potential for additional training examples for small classes from larger related classes, and challenges, such as a harder to learn distinction between similar GO terms, for standard classification-based approaches. Results We propose a method to enhance the performance of classification-based protein function prediction algorithms by addressing the issue of using these interrelationships between functional classes constituting functional classification schemes. Using a standard measure for evaluating the semantic similarity between nodes in an ontology, we quantify and incorporate these inter-relationships into the k-nearest neighbor classifier. We present experiments on several large genomic data sets, each of which is used for the modeling and prediction of over hundred classes from the GO Biological Process ontology. The results show that this incorporation produces more accurate predictions for a large number of the functional classes considered, and also that the classes benefitted most by this approach are those containing the fewest members. In addition, we show how our proposed framework can be used for integrating information from the entire GO hierarchy for improving the accuracy of

40 CFR 174.512 - Coat Protein of Potato Virus Y; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Coat Protein of Potato Virus Y...-INCORPORATED PROTECTANTS Tolerances and Tolerance Exemptions § 174.512 Coat Protein of Potato Virus Y; exemption from the requirement of a tolerance. Residues of Coat Protein of Potato Virus Y are exempt from...

"Violent Intent Modeling: Incorporating Cultural Knowledge into the Analytical Process

Energy Technology Data Exchange (ETDEWEB)

Sanfilippo, Antonio P.; Nibbs, Faith G.

2007-08-24

While culture has a significant effect on the appropriate interpretation of textual data, the incorporation of cultural considerations into data transformations has not been systematic. Recognizing that the successful prevention of terrorist activities could hinge on the knowledge of the subcultures, Anthropologist and DHS intern Faith Nibbs has been addressing the need to incorporate cultural knowledge into the analytical process. In this Brown Bag she will present how cultural ideology is being used to understand how the rhetoric of group leaders influences the likelihood of their constituents to engage in violent or radicalized behavior, and how violent intent modeling can benefit from understanding that process.

Antimicrobial activity and properties of irreversible hydrocolloid impression materials incorporated with silver nanoparticles.

Science.gov (United States)

Ginjupalli, Kishore; Alla, Rama Krishna; Tellapragada, Chaitanya; Gupta, Lokendra; Upadhya Perampalli, Nagaraja

2016-06-01

Conventional spray and the immersion disinfection of irreversible hydrocolloid impression materials may lead to dimensional changes. The purpose of this in vitro study was to investigate the antimicrobial activity and properties of irreversible hydrocolloid impression materials incorporated with silver nanoparticles. The antimicrobial activity and properties of 2 commercially available irreversible hydrocolloid impression materials were evaluated after incorporating varying concentrations of silver nanoparticles. Antimicrobial activity was determined using the disk diffusion method. The gel strength, permanent deformation, flow, and gelation time were measured according to American Dental Association specification #18. Analysis of variance was used to identify the significant differences within and across the groups (α=.05). Adding silver nanoparticles to irreversible hydrocolloid impression materials resulted in superior antimicrobial activity without adversely affecting their properties. Adding silver nanoparticles to Zelgan significantly increased the gel strength compared with the control group, except at 5 wt%. However, the gel strength of Tropicalgin was unaffected except at 5 wt%. An increase in the permanent deformation was found with the incorporation of silver nanoparticles in both Zelgan and Tropicalgin. The flow of Zelgan increased with the incorporation of silver nanoparticles, whereas a decrease in the flow of Tropicalgin was observed at 1 wt% and 2 wt%. An increase in the gelation time of both Zelgan and Tropicalgin was observed with the incorporation of silver nanoparticles. Based on this in vitro study, silver nanoparticles can be incorporated into irreversible hydrocolloid impression materials as antimicrobial agents without adversely affecting their properties. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Incorporating hydrologic variability into nutrient spiraling

Science.gov (United States)

Doyle, Martin W.

2005-09-01

Nutrient spiraling describes the path of a nutrient molecule within a stream ecosystem, combining the biochemical cycling processes with the downstream driving force of stream discharge. To date, nutrient spiraling approaches have been hampered by their inability to deal with fluctuating flows, as most studies have characterized nutrient retention within only a small range of discharges near base flow. Here hydrologic variability is incorporated into nutrient spiraling theory by drawing on the fluvial geomorphic concept of effective discharge. The effective discharge for nutrient retention is proposed to be that discharge which, over long periods of time, is responsible for the greatest portion of nutrient retention. A developed analytical model predicts that the effective discharge for nutrient retention will equal the modal discharge for small streams or those with little discharge variability. As modal discharge increases or discharge variability increases, the effective discharge becomes increasingly less than the modal discharge. In addition to the effective discharge, a new metric is proposed, the functionally equivalent discharge, which is the single discharge that will reproduce the magnitude of nutrient retention generated by the full hydrologic frequency distribution when all discharge takes place at that rate. The functionally equivalent discharge was found to be the same as the modal discharge at low hydrologic variability, but increasingly different from the modal discharge at large hydrologic variability. The functionally equivalent discharge provides a simple quantitative means of incorporating hydrologic variability into long-term nutrient budgets.

Preferential incorporation of substitutional nitrogen near the atomic step edges in diluted nitride alloys

Energy Technology Data Exchange (ETDEWEB)

Cornet, C.; Nguyen Thanh, T.; Almosni, S.; Rohel, T.; Kuyyalil, J.; Rambaud, A.; Letoublon, A.; Bertru, N.; Durand, O.; Le Corre, A. [Universite Europeenne de Bretagne, INSA Rennes, France and CNRS, UMR 6082 Foton, 20 avenue des Buttes de Coeesmes, 35708 Rennes (France); Quinci, T. [Universite Europeenne de Bretagne, INSA Rennes, France and CNRS, UMR 6082 Foton, 20 avenue des Buttes de Coeesmes, 35708 Rennes (France); CEA LCP, INES, Savoie Technolac, 73375 Le Bourget du Lac (France)

2012-12-17

We have investigated the influence of the surface roughness on nitrogen incorporation during the molecular beam epitaxy of diluted nitrides, independently of the other growth parameters. GaPN/GaP layers grown simultaneously on surfaces displaying different roughnesses reveal a large difference in nitrogen incorporation despite the same growth temperature and growth rate. The same difference is found on quasi-lattice-matched GaAsPN demonstrating that the phenomenon is not related to any strain-induced mechanisms. The tendency is clearly confirmed when varying the growth conditions. As a direct consequence, the incorporation of substitutional nitrogen near the atomic step edges is found to be 6.7 times more probable than the in-plane nitrogen incorporation. The formation of N-N{sub i} clusters and their stability on the surface is discussed.

Subsurface Conditions Controlling Uranium Incorporation in Iron Oxides: A Redox Stable Sink

International Nuclear Information System (INIS)

Fendorf, Scott

2016-01-01

Toxic metals and radionuclides throughout the U.S. Department of Energy Complex pose a serious threat to ecosystems and to human health. Of particular concern is the redox-sensitive radionuclide uranium, which is classified as a priority pollutant in soils and groundwaters at most DOE sites owing to its large inventory, its health risks, and its mobility with respect to primary waste sources. The goal of this research was to contribute to the long-term mission of the Subsurface Biogeochemistry Program by determining reactions of uranium with iron (hydr)oxides that lead to long-term stabilization of this pervasive contaminant. The research objectives of this project were thus to (1) identify the (bio)geochemical conditions, including those of the solid-phase, promoting uranium incorporation in Fe (hydr)oxides, (2) determine the magnitude of uranium incorporation under a variety of relevant subsurface conditions in order to quantify the importance of this pathway when in competition with reduction or adsorption; (3) identify the mechanism(s) of U(VI/V) incorporation in Fe (hydr)oxides; and (4) determine the stability of these phases under different biogeochemical (inclusive of redox) conditions. Our research demonstrates that redox transformations are capable of achieving U incorporation into goethite at ambient temperatures, and that this transformation occurs within days at U and Fe(II) concentrations that are common in subsurface geochemical environments with natural ferrihydrites - inclusive of those with natural impurities. Increasing Fe(II) or U concentration, or initial pH, made U(VI) reduction to U(IV) a more competitive sequestration pathway in this system, presumably by increasing the relative rate of U reduction. Uranium concentrations commonly found in contaminated subsurface environments are often on the order of 1-10 μM, and groundwater Fe(II) concentrations can reach exceed 1 mM in reduced zones of the subsurface. The redox-driven U(V) incorporation

Subsurface Conditions Controlling Uranium Incorporation in Iron Oxides: A Redox Stable Sink

Energy Technology Data Exchange (ETDEWEB)

Fendorf, Scott [Stanford Univ., CA (United States)

2016-04-05

Toxic metals and radionuclides throughout the U.S. Department of Energy Complex pose a serious threat to ecosystems and to human health. Of particular concern is the redox-sensitive radionuclide uranium, which is classified as a priority pollutant in soils and groundwaters at most DOE sites owing to its large inventory, its health risks, and its mobility with respect to primary waste sources. The goal of this research was to contribute to the long-term mission of the Subsurface Biogeochemistry Program by determining reactions of uranium with iron (hydr)oxides that lead to long-term stabilization of this pervasive contaminant. The research objectives of this project were thus to (1) identify the (bio)geochemical conditions, including those of the solid-phase, promoting uranium incorporation in Fe (hydr)oxides, (2) determine the magnitude of uranium incorporation under a variety of relevant subsurface conditions in order to quantify the importance of this pathway when in competition with reduction or adsorption; (3) identify the mechanism(s) of U(VI/V) incorporation in Fe (hydr)oxides; and (4) determine the stability of these phases under different biogeochemical (inclusive of redox) conditions. Our research demonstrates that redox transformations are capable of achieving U incorporation into goethite at ambient temperatures, and that this transformation occurs within days at U and Fe(II) concentrations that are common in subsurface geochemical environments with natural ferrihydrites—inclusive of those with natural impurities. Increasing Fe(II) or U concentration, or initial pH, made U(VI) reduction to U(IV) a more competitive sequestration pathway in this system, presumably by increasing the relative rate of U reduction. Uranium concentrations commonly found in contaminated subsurface environments are often on the order of 1-10 μM, and groundwater Fe(II) concentrations can reach exceed 1 mM in reduced zones of the subsurface. The redox-driven U(V) incorporation

Incorporation of [3H]Leucine and [3H]Valine into Protein of Freshwater Bacteria: Field Applications

OpenAIRE

Jørgensen, Niels O. G.

1992-01-01

Incorporation of leucine and valine into proteins of freshwater bacteria as a measure of bacterial production was tested in two eutrophic Danish lakes and was related to bacterial production measured by thymidine incorporation. In a depth profile (0 to 8 m) in Frederiksborg Castle Lake, incorporation of 100 nM leucine and valine gave similar rates of protein production. In terms of carbon, this production was about 50% lower than incorporation of 10 nM thymidine. In another depth profile in t...

Straw incorporation increases crop yield and soil organic carbon sequestration but varies under different natural conditions and farming practices in China: a system analysis

OpenAIRE

Han, Xiao; Xu, Cong; Dungait, Jennifer A. J.; Bol, Roland; Wang, Xiaojie; Wu, Wenliang; Meng, Fanqiao

2018-01-01

Loss of soil organic carbon (SOC) from agricultural soils is a key indicator of soil degradation associated with reductions in net primary productivity in crop production systems worldwide. Technically simple and locally appropriate solutions are required for farmers to increase SOC and to improve cropland management. In the last 30 years, straw incorporation (SI) has gradually been implemented across China in the context of agricultural intensification and rural liveliho...

40 CFR 174.506 - Bacillus thuringiensis Cry34Ab1 and Cry35Ab1 proteins in corn; exemption from the requirement of...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bacillus thuringiensis Cry34Ab1 and Cry35Ab1 proteins in corn; exemption from the requirement of a tolerance. 174.506 Section 174.506 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS...

Incorporation of the capillary hysteresis model HYSTR into the numerical code TOUGH

International Nuclear Information System (INIS)

Niemi, A.; Bodvarsson, G.S.; Pruess, K.

1991-11-01

As part of the work performed to model flow in the unsaturated zone at Yucca Mountain Nevada, a capillary hysteresis model has been developed. The computer program HYSTR has been developed to compute the hysteretic capillary pressure -- liquid saturation relationship through interpolation of tabulated data. The code can be easily incorporated into any numerical unsaturated flow simulator. A complete description of HYSTR, including a brief summary of the previous hysteresis literature, detailed description of the program, and instructions for its incorporation into a numerical simulator are given in the HYSTR user's manual (Niemi and Bodvarsson, 1991a). This report describes the incorporation of HYSTR into the numerical code TOUGH (Transport of Unsaturated Groundwater and Heat; Pruess, 1986). The changes made and procedures for the use of TOUGH for hysteresis modeling are documented

Liquid metal/metal oxide frameworks with incorporated Ga2O3 for photocatalysis.

Science.gov (United States)

Zhang, Wei; Naidu, Boddu S; Ou, Jian Zhen; O'Mullane, Anthony P; Chrimes, Adam F; Carey, Benjamin J; Wang, Yichao; Tang, Shi-Yang; Sivan, Vijay; Mitchell, Arnan; Bhargava, Suresh K; Kalantar-Zadeh, Kourosh

2015-01-28

Solvothermally synthesized Ga2O3 nanoparticles are incorporated into liquid metal/metal oxide (LM/MO) frameworks in order to form enhanced photocatalytic systems. The LM/MO frameworks, both with and without incorporated Ga2O3 nanoparticles, show photocatalytic activity due to a plasmonic effect where performance is related to the loading of Ga2O3 nanoparticles. Optimum photocatalytic efficiency is obtained with 1 wt % incorporation of Ga2O3 nanoparticles. This can be attributed to the sub-bandgap states of LM/MO frameworks, contributing to pseudo-ohmic contacts which reduce the free carrier injection barrier to Ga2O3.

Spent fuel storage requirements, 1990--2040

International Nuclear Information System (INIS)

Walling, R.; Bierschbach, M.

1990-11-01

Historical inventories of spent fuel are combined with US Department of Energy (DOE) projections of future discharges from commercial nuclear reactors in the United States to provide estimates of spent fuel storage requirements over the next 51 years, through the year 2040. The needs for storage capacity beyond that presently available in the pools are estimated. These estimates incorporate the maximum capacities within current and planned in-pool storage facilities and any planned transshipments of fuel to other reactors or facilities. Existing and future dry storage facilities are also discussed. Historical data through December 1989 are derived from the 1990 Form RW-859 data survey of nuclear utilities. Projected discharges through the end of reactor life are based on DOE estimates of future nuclear capacity, generation, and spent fuel discharges. 15 refs., 3 figs., 11 tabs

Incorporating solar home system for smart grid application

NARCIS (Netherlands)

Alipuria, B.; Asare-Bediako, B.; Groot, de R.J.W.; Sarker, M.J.; Slootweg, J.G.; Kling, W.L.

2012-01-01

Smart Grids have been one of the prime focuses of studies for the past few years on power systems. The goal is to make the power infrastructure more reliable and effective to cater for the needs of the future. Another goal for improving the power infrastructure is to incorporate renewable energy

Incorporating Wind Excerpts in the School Band Curriculum

Science.gov (United States)

Bruns, Robert

2010-01-01

Professional musicians and college students commonly study orchestral excerpts, but a similar practice has yet to be implemented in the band field. Due to their widespread use in orchestral auditions, excerpts have been incorporated as a tool for musical development. Many college professors regularly assign excerpt study as part of their…

Incorporating interfacial phenomena in solidification models

Science.gov (United States)

Beckermann, Christoph; Wang, Chao Yang

1994-01-01

A general methodology is available for the incorporation of microscopic interfacial phenomena in macroscopic solidification models that include diffusion and convection. The method is derived from a formal averaging procedure and a multiphase approach, and relies on the presence of interfacial integrals in the macroscopic transport equations. In a wider engineering context, these techniques are not new, but their application in the analysis and modeling of solidification processes has largely been overlooked. This article describes the techniques and demonstrates their utility in two examples in which microscopic interfacial phenomena are of great importance.

Incorporating sustainability into accounting curricula

DEFF Research Database (Denmark)

Hazelton, James; Haigh, Matthew

2010-01-01

. The first author introduced sustainability-related material into a core technical accounting unit and created an elective unit. The second author participated with students to evaluate critically social reports of employers, current and potential. In terms of an objective of bringing reflexivity......This paper chronicles the journey of two projects that sought to incorporate principles of sustainable development into predominantly technical postgraduate accounting curricula. The design and delivery of the projects were informed by Freirian principles of praxis and critical empowerment...... as vocational skills) add to the difficulties for sustainability in penetrating already overcrowded curricula....

An active one-particle microrheometer: incorporating magnetic tweezers to total internal reflection microscopy.

Science.gov (United States)

Gong, Xiangjun; Hua, Li; Wu, Chi; Ngai, To

2013-03-01

We present a novel microrheometer by incorporating magnetic tweezers in the total internal reflection microscopy (TIRM) that enables measuring of viscoelastic properties of materials near solid surface. An evanescent wave generated by a solid∕liquid interface in the TIRM is used as the incident light source in the microrheometer. When a probe particle (of a few micrometers diameter) moves near the interface, it can interact with the evanescent field and reflect its position with respect to the interface by the scattered light intensity. The exponential distance dependence of the evanescent field, on the one hand, makes this technique extremely sensitive to small changes from z-fluctuations of the probe (with a resolution of several nanometers), and on the other, it does not require imaging of the probe with high lateral resolution. Another distinct advantage is the high sensitivity in determining the z position of the probe in the absence of any labeling. The incorporated magnetic tweezers enable us to effectively manipulate the distance of the embedded particle from the interface either by a constant or an oscillatory force. The force ramp is easy to implement through a coil current ramp. In this way, the local viscous and elastic properties of a given system under different confinements can therefore be measured by resolving the near-surface particle motion. To test the feasibility of applying this microrheology to soft materials, we measured the viscoelastic properties of sucrose and poly(ethylene glycol) solutions and compared the results to bulk rheometry. In addition, we applied this technique in monitoring the structure and properties of deformable microgel particles near the flat surface.

Properties of gelatin-based films incorporated with chitosan-coated microparticles charged with rutin.

Science.gov (United States)

Dammak, Ilyes; Bittante, Ana Mônica Quinta Barbosa; Lourenço, Rodrigo Vinicius; do Amaral Sobral, Paulo José

2017-08-01

The aim of this study was development an active film based on gelatin incorporated with antioxidant, rutin carried into microparticles. The complexation between oppositely charged lecithin and chitosan was applied to prepare the chitosan-coated microparticles. The generated microparticles had an average size of 520±4nm and a span of 0.3 were formulated by a rotor-stator homogenize at the homogenization speed 10,000rpm. Composite films were prepared by incorporating chitosan-coated microparticles, at various concentrations (0.05, 0.1, 0.5, or 1% (based on the weight of the gelatin powder)) in the gelatin-based films. For the prepared films, the results showed that obtained physicochemical, water vapor barrier, and mechanical were compared with native gelatin film with a slight decrease for chitosan concentration higher than 0.5%. The microstructure studies done by scanning electron microscopes, revealed different micropores embedded with oil resulting from the incorporation of the microparticles into the gelatin matrix. Moreover, the calorimetric results were comparable to those of gelatin control film with T g value 45°C and increased crystallinity percentage with increasing incorporation of microparticles. This original concept of composite biodegradable films may thus be a good alternative to incorporate liposoluble active compounds to design an active packaging with good properties. Copyright © 2017 Elsevier B.V. All rights reserved.

Incorporating Engineering Design Challenges into STEM Courses

OpenAIRE

Householder, Daniel L.; Hailey, Christine E.

2012-01-01

Successful strategies for incorporating engineering design challenges into science, technology, engineering, and mathematics (STEM) courses in American high schools are presented in this paper. The developers have taken the position that engineering design experiences should be an important component of the high school education of all American youth. In most instances, these experiences in engineering design are infused into instruction programs in standards-based courses in science, technol...

Fast Approximate Joint Diagonalization Incorporating Weight Matrices

Czech Academy of Sciences Publication Activity Database

Tichavský, Petr; Yeredor, A.

2009-01-01

Roč. 57, č. 3 (2009), s. 878-891 ISSN 1053-587X R&D Projects: GA MŠk 1M0572 Institutional research plan: CEZ:AV0Z10750506 Keywords : autoregressive processes * blind source separation * nonstationary random processes Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 2.212, year: 2009 http://library.utia.cas.cz/separaty/2009/SI/tichavsky-fast approximate joint diagonalization incorporating weight matrices.pdf

The Use of UML for Software Requirements Expression and Management

Science.gov (United States)

Murray, Alex; Clark, Ken

2015-01-01

It is common practice to write English-language "shall" statements to embody detailed software requirements in aerospace software applications. This paper explores the use of the UML language as a replacement for the English language for this purpose. Among the advantages offered by the Unified Modeling Language (UML) is a high degree of clarity and precision in the expression of domain concepts as well as architecture and design. Can this quality of UML be exploited for the definition of software requirements? While expressing logical behavior, interface characteristics, timeliness constraints, and other constraints on software using UML is commonly done and relatively straight-forward, achieving the additional aspects of the expression and management of software requirements that stakeholders expect, especially traceability, is far less so. These other characteristics, concerned with auditing and quality control, include the ability to trace a requirement to a parent requirement (which may well be an English "shall" statement), to trace a requirement to verification activities or scenarios which verify that requirement, and to trace a requirement to elements of the software design which implement that requirement. UML Use Cases, designed for capturing requirements, have not always been satisfactory. Some applications of them simply use the Use Case model element as a repository for English requirement statements. Other applications of Use Cases, in which Use Cases are incorporated into behavioral diagrams that successfully communicate the behaviors and constraints required of the software, do indeed take advantage of UML's clarity, but not in ways that support the traceability features mentioned above. Our approach uses the Stereotype construct of UML to precisely identify elements of UML constructs, especially behaviors such as State Machines and Activities, as requirements, and also to achieve the necessary mapping capabilities. We describe this approach in the

Development of NPP Safety Requirements into Kenya's Grid Codes

Energy Technology Data Exchange (ETDEWEB)

Ndirangu, Nguni James; Koo, Chang Choong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2015-10-15

As presently drafted, Kenya's grid codes do not contain any NPP requirements. Through case studies of selected grid codes, this paper will study frequency, voltage and fault ride through requirements for NPP connection and operation, and offer recommendation of how these requirements can be incorporated in the Kenya's grid codes. Voltage and frequency excursions in Kenya's grid are notably frequently outside the generic requirement and the values observed by the German and UK grid codes. Kenya's grid codes require continuous operation for ±10% of nominal voltage and 45.0 to 52Hz on the grid which poses safety issues for an NPP. Considering stringent NPP connection to grid and operational safety requirements, and the importance of the TSO to NPP safety, more elaborate requirements need to be documented in the Kenya's grid codes. UK and Germany have a history of meeting high standards of nuclear safety and it is therefore recommended that format like the one in Table 1 to 3 should be adopted. Kenya's Grid code considering NPP should have: • Strict rules for voltage variation, that is, -5% to +10% of the nominal voltage • Strict rules for frequency variation, that is, 48Hz to 52Hz of the nominal frequencyand.

Development of NPP Safety Requirements into Kenya's Grid Codes

International Nuclear Information System (INIS)

Ndirangu, Nguni James; Koo, Chang Choong

2015-01-01

As presently drafted, Kenya's grid codes do not contain any NPP requirements. Through case studies of selected grid codes, this paper will study frequency, voltage and fault ride through requirements for NPP connection and operation, and offer recommendation of how these requirements can be incorporated in the Kenya's grid codes. Voltage and frequency excursions in Kenya's grid are notably frequently outside the generic requirement and the values observed by the German and UK grid codes. Kenya's grid codes require continuous operation for ±10% of nominal voltage and 45.0 to 52Hz on the grid which poses safety issues for an NPP. Considering stringent NPP connection to grid and operational safety requirements, and the importance of the TSO to NPP safety, more elaborate requirements need to be documented in the Kenya's grid codes. UK and Germany have a history of meeting high standards of nuclear safety and it is therefore recommended that format like the one in Table 1 to 3 should be adopted. Kenya's Grid code considering NPP should have: • Strict rules for voltage variation, that is, -5% to +10% of the nominal voltage • Strict rules for frequency variation, that is, 48Hz to 52Hz of the nominal frequencyand

Application of the Taguchi Method for Optimizing the Process Parameters of Producing Lightweight Aggregates by Incorporating Tile Grinding Sludge with Reservoir Sediments.

Science.gov (United States)

Chen, How-Ji; Chang, Sheng-Nan; Tang, Chao-Wei

2017-11-10

This study aimed to apply the Taguchi optimization technique to determine the process conditions for producing synthetic lightweight aggregate (LWA) by incorporating tile grinding sludge powder with reservoir sediments. An orthogonal array L 16 (4⁵) was adopted, which consisted of five controllable four-level factors (i.e., sludge content, preheat temperature, preheat time, sintering temperature, and sintering time). Moreover, the analysis of variance method was used to explore the effects of the experimental factors on the particle density, water absorption, bloating ratio, and loss on ignition of the produced LWA. Overall, the produced aggregates had particle densities ranging from 0.43 to 2.1 g/cm³ and water absorption ranging from 0.6% to 13.4%. These values are comparable to the requirements for ordinary and high-performance LWAs. The results indicated that it is considerably feasible to produce high-performance LWA by incorporating tile grinding sludge with reservoir sediments.

Timing incorporation of different green manure crops to minimize the risk of nitrogen leaching

Directory of Open Access Journals (Sweden)

H. KÄNKÄNEN

2008-12-01

Full Text Available Seven field trials at four research sites were carried out to study the effect of incorporation time of different plant materials on soil mineral N content during two successive seasons. Annual hairy vetch (Vicia villosa Roth, red clover (Trifolium pratense L., westerwold ryegrass (Lolium multiflorum Lam. var. westerwoldicum and straw residues of N-fertilized spring barley (Hordeum vulgare were incorporated into the soil by ploughing in early September, late October and the following May, and by reduced tillage in May. Delaying incorporation of the green manure crop in autumn lessened the risk of N leaching. The higher the crop N and soil NO3-N content, the greater the risk of leaching. Incorporation in the following spring, which lessened the risk of N leaching as compared with early autumn ploughing, often had an adverse effect on the growth of the succeeding crop. After spring barley, the NO3-N content of the soil tended to be high, but the timing of incorporation did not have a marked effect on soil N. With exceptionally high soil mineral N content, N leaching was best inhibited by growing westerwold ryegrass in the first experimental year. ;

40 CFR 174.531 - Coat protein of plum pox virus; exemption from the requirement of a tolerance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Coat protein of plum pox virus...-INCORPORATED PROTECTANTS Tolerances and Tolerance Exemptions § 174.531 Coat protein of plum pox virus; exemption from the requirement of a tolerance. Residues of the coat protein of plum pox virus in or on the...

incorporating digital technology in the teaching and learning

African Journals Online (AJOL)

Incorporating the latest digital technology into traditional language teaching systems has opened up a wealth of multimedia and interactive applications available to bring teaching methods into the 21st century. In the last 10 years, the world has experienced a sudden increase of technology, and this has had a lot of impact ...

The european passive plant (EPP) design: compliance with the european utilities requirements (EUR)

International Nuclear Information System (INIS)

Noviello, L.; Oyarzabal, M.

1996-01-01

Back 1986, most of the European firms have participated to the American program called the Advanced Light Water Reactors (ALWR) including the development of the Utilities Requirements as well as four projects as for instance AP600. Later, in the year 1990, seven European firms have begun to develop the European Utilities Requirements. This development is justified by the fact that the lessons learned by the nuclear power plants designs programs of the years 1980 can be incorporated and the European specific conditions can be taken into consideration. Thus, in 1994, eight European firms - Westinghouse and their industrial partners - have decided to launch a multiphase program in order to check the AP600 compliance with the European Utilities Requirements (EUR) and to develop the required alterations. Today, the phase I of the EPP (European Passive Plant) program has been completed. In this phase, the main important objectives have been reached. (O.M.)

Selective incorporation of dissolved organic matter (DOM) during sea ice formation

DEFF Research Database (Denmark)

Müller, Susan; Vähätalo, Anssi V.; Stedmon, Colin

2013-01-01

This study investigated the incorporation of DOM from seawater into b2 day-old sea ice in tanks filled with seawater alone or amended with DOM extracted from the microalga, Chlorella vulgaris. Optical properties, including chromophoric DOM (CDOM) absorption and fluorescence, as well as concentrat......This study investigated the incorporation of DOM from seawater into b2 day-old sea ice in tanks filled with seawater alone or amended with DOM extracted from the microalga, Chlorella vulgaris. Optical properties, including chromophoric DOM (CDOM) absorption and fluorescence, as well...

Incorporating Level-2 PSA Feature of CONPAS into AIMS-PSA Software

International Nuclear Information System (INIS)

Han, Sang Hoon; Lim, Hogon; Ahn, Kwang Il

2014-01-01

CONPAS (CONtainment Performance Analysis System) utilizes a methodology to treat containment phenomena in detail like APET but in simple way. In mid 2000's, KAERI has developed very fast cut set generator FTREX and PC's OS (Operating system) has changed into Windows 95. Thus, KAERI has developed new Level-1 PSA software, called AIMS-PSA (Advanced Information Management System for PSA) to replace KIRAP. Recently, KAERI has been developing an integrated PSA platform, called OCEANS (On-line Consolidator and Evaluator of All mode risk for Nuclear System), for the risk assessment of all power modes and all hazards. CONPAS for Level-2 PSA was developed in 1990's using the Visual Basic 6.0 compiler which is not supported any more. It needs to be updated for the integrated PSA software framework. This paper describes a study to incorporate the features of CONPAS into AIMS-PSA. The basic idea is to follow the approach of CONPAS, but in the integrated way. Various approaches for Level-2 PSA have been used since WASH-1400. APET approach of NUREG-1150 study would be most comprehensive and complex methodology for containment event tree analysis. CONPAS is the Level-2 PSA software to utilize an approach to treat containment phenomena in detail like APET but in simple way. But, new Level-2 PSA software is required to develop more integrated PSA framework. A modified approach of CONPAS is developed and incorporated in AIMS-PSA software that can handle Level-1 and Level-2 PSA in the integrated way (from the viewpoint of event tree and fault tree). AIMS-PSA combines whole Level-2 PSA model to produce a One Top fault tree and to generate cut sets in the same way as Level-1 PSA. Quantification results of Level-2 PSA such as frequency for each STC can be calculated from the minimal cut sets

Periodontal tissue regeneration with PRP incorporated gelatin hydrogel sponges

International Nuclear Information System (INIS)

Nakajima, Dai; Tabata, Yasuhiko; Sato, Soh

2015-01-01

Gelatin hydrogels have been designed and prepared for the controlled release of the transforming growth factor (TGF-b1) and the platelet-derived growth factor (PDGF-BB). PRP (Platelet rich plasma) contains many growth factors including the PDGF and TGF-b1. The objective of this study was to evaluate the regeneration of periodontal tissue following the controlled release of growth factors in PRP. For the periodontal ligament cells and osteoblast, PRP of different concentrations was added. The assessment of DNA, mitochondrial activity and ALP activity were measured. To evaluate the TGF-β1 release from PRP incorporated gelatin sponge, amounts of TGF-β1 in each supernatant sample were determined by the ELISA. Transplantation experiments to prepare a bone defect in a rat alveolar bone were an implanted gelatin sponge incorporated with different concentration PRP. In DNA assay and MTT assay, after the addition of PRP to the periodontal ligament cells and osteoblast, the cell count and mitochondrial activity had increased the most in the group with the addition of 5  ×  PRP. In the ALP assay, after the addition of PRP to the periodontal ligament cells, the cell activity had increased the most in the group with the addition of 3  ×  PRP. In the transplantation, the size of the bone regenerated in the defect with 3  ×  PRP incorporated gelatin sponge was larger than that of the other group. (paper)

Periodontal tissue regeneration with PRP incorporated gelatin hydrogel sponges.

Science.gov (United States)

Nakajima, Dai; Tabata, Yasuhiko; Sato, Soh

2015-10-20

Gelatin hydrogels have been designed and prepared for the controlled release of the transforming growth factor (TGF-b1) and the platelet-derived growth factor (PDGF-BB). PRP (Platelet rich plasma) contains many growth factors including the PDGF and TGF-b1. The objective of this study was to evaluate the regeneration of periodontal tissue following the controlled release of growth factors in PRP. For the periodontal ligament cells and osteoblast, PRP of different concentrations was added. The assessment of DNA, mitochondrial activity and ALP activity were measured. To evaluate the TGF-β1 release from PRP incorporated gelatin sponge, amounts of TGF-β1 in each supernatant sample were determined by the ELISA. Transplantation experiments to prepare a bone defect in a rat alveolar bone were an implanted gelatin sponge incorporated with different concentration PRP. In DNA assay and MTT assay, after the addition of PRP to the periodontal ligament cells and osteoblast, the cell count and mitochondrial activity had increased the most in the group with the addition of 5  ×  PRP. In the ALP assay, after the addition of PRP to the periodontal ligament cells, the cell activity had increased the most in the group with the addition of 3  ×  PRP. In the transplantation, the size of the bone regenerated in the defect with 3  ×  PRP incorporated gelatin sponge was larger than that of the other group.

Hydrogen Incorporation during Aluminium Anodisation on Silicon Wafer Surfaces

International Nuclear Information System (INIS)

Lu, Pei Hsuan Doris; Strutzberg, Hartmuth; Wenham, Stuart; Lennon, Alison

2014-01-01

Hydrogen can act to reduce recombination at silicon surfaces for solar cell devices and consequently the ability of dielectric layers to provide a source of hydrogen for this purpose is of interest. However, due to the ubiquitous nature of hydrogen and its mobility, direct measurements of hydrogen incorporation in dielectric layers are challenging. In this paper, we report the use of secondary ion mass spectrometry measurements to show that deuterium from an electrolyte can be incorporated in an anodic aluminium oxide (AAO) layer and be introduced into an underlying amorphous silicon layer during anodisation of aluminium on silicon wafers. After annealing at 400 °C, the concentration of deuterium in the AAO was reduced by a factor of two, as the deuterium was re-distributed to the interface between the amorphous silicon and AAO and to the amorphous silicon. The assumption that hydrogen, from an aqueous electrolyte, could be similarly incorporated in AAO, is supported by the observation that the hydrogen content in the underlying amorphous silicon was increased by a factor of ∼ 3 after anodisation. Evidence for hydrogen being introduced into crystalline silicon after aluminium anodisation was provided by electrochemical capacitance voltage measurements indicating boron electrical deactivation in the underlying crystalline silicon. If introduced hydrogen can electrically deactivate dopant atoms at the surface, then it is reasonable to assume that it could also deactivate recombination-active states at the crystalline silicon interface therefore enabling higher minority carrier lifetimes in the silicon wafer

77 FR 59758 - Idaho: Incorporation by Reference of Approved State Hazardous Waste Management Program

Science.gov (United States)

2012-10-01

...: Incorporation by Reference of Approved State Hazardous Waste Management Program AGENCY: Environmental Protection..., (RCRA), allows the Environmental Protection Agency (EPA) to authorize State hazardous waste management... codification of the authorized Idaho hazardous waste management program and incorporates by reference...

Carnauba straw incorporated into the soil for fertilization carrot in organic cultivation

Directory of Open Access Journals (Sweden)

Micharlyson Carlos Morais

2017-10-01

Full Text Available Carrot is one of the most produced vegetables in Brazil and, with the growing demand for organic vegetables, it is necessary to develop production technologies that are less dependent on external inputs and more accessible to family agriculture. The objective of this study was to evaluate the effect of the addition to soil of carnauba straw as fertilizer, incorporated under different pre-planting periods, for the organic cultivation of the carrot. The experiment was carried out in the Experimental Horta of the Instituto Federal do Rio Grande do Norte, Campus Ipanguaçu, using the experimental design in randomized blocks with three replicates and five treatments referring to the times of 15; 30; 45 and 60 days for the incorporation of carnauba straw, in the amount of 14 t ha-1, prior to planting the carrot, and a control treatment without addition of straw to the soil. The evaluated characteristics was dry mass of the aerial part, the length and root diameter, and productivity. There was an effect of the incorporation time of the carnauba straw on the length and productivity, being the highest values observed when the straw was incorporated between 15 and 30 days before sowing.

Adhesion of Candida albicans to Vanillin Incorporated Self-Curing Orthodontic PMMA Resin.

Science.gov (United States)

Zam, K.; Sawaengkit, P.; Thaweboon, S.; Thaweboon, B.

2018-02-01

It has been observed that there is an increase in Candida carriers during the treatment with orthodontic removable appliance. Vanillin is flavouring agent, which is known to have antioxidant and antimicrobial properties. The aim of this study was to evaluate the effect of vanillin incorporated PMMA on adhesion of Candida albicans. A total of 36 orthodontic self-curing PMMA resin samples were fabricated. The samples were divided into 3 groups depending on percentage of vanillin incorporated (0.1%, 0.5% and PMMA without vanillin as control). PMMA samples were coated with saliva. The adhesion assay was performed with C. albicans (ATCC 10231). The adherent yeast cells were stained with crystal violet and counted under microscope by random selection of 3 fields at 10X magnification. The statistical analyses performed by Kruskal Wallis and Mann Whitney non-parametric test. It was found that the PMMA resin samples with vanillin incorporation significantly reduced the adhesion of C. albicans as compared to the control group. This study indicates that vanillin incorporated resin can impede the adhesion of C. albicans to about 45 - 56 %. With further testing and development, vanillin can be employed as an antifungal agent to prevent adhesion of C. albicans to orthodontic self-curing PMMA resin.

Incorporating Experience Curves in Appliance Standards Analysis

Energy Technology Data Exchange (ETDEWEB)

Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

2011-10-31

The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

In vitro incorporation of radiolabeled cholesteryl esters into high and low density lipoproteins

International Nuclear Information System (INIS)

Terpstra, A.H.; Nicolosi, R.J.; Herbert, P.N.

1989-01-01

We have developed and validated a method for in vitro incorporation of radiolabeled cholesteryl esters into low density (LDL) and high density lipoproteins (HDL). Radiolabeled cholesteryl esters dissolved in absolute ethanol were mixed with LDL or HDL in the presence of lipoprotein-deficient serum (LPDS) as a source of core lipid transfer activity. The efficiency of incorporation was dependent on: (a) the core lipid transfer activity and quantity of LPDS, (b) the mass of added radiolabeled cholesteryl esters, (c) the length of incubation, and (d) the amount of acceptor lipoprotein cholesterol. The tracer incorporation was documented by repeat density gradient ultracentrifugation, agarose gel electrophoresis, and precipitation with heparin-MnCl2. The radiolabeling conditions did not affect the following properties of the lipoproteins: (1) chemical composition, (2) electrophoretic mobility on agarose gels, (3) hydrated density, (4) distribution of apoproteins on SDS gels, (5) plasma clearance rates, and (6) immunoprecipitability of HDL apoproteins A-I and A-II. Rat HDL containing radiolabeled cholesteryl esters incorporated in vitro had plasma disappearance rates identical to HDL radiolabeled in vivo

75 FR 51148 - Notice of Solicitation of Public Comment on Consideration of Incorporating IFRS Into the...

Science.gov (United States)

2010-08-18

... plan on consideration of the incorporation of IFRS, involve the impact of such incorporation on: U.S... in that company? To what extent are investors aware of the potential impact of incorporation of IFRS... impact of accounting standards, whether IFRS or U.S. GAAP, on the companies that they currently, or may...

Luminescence enhancement of ZnO-poly(methylmethacrylate) nanocomposite films by incorporation of crystalline BaTiO_3 nanoparticles

International Nuclear Information System (INIS)

Kanamori, Tsuyoshi; Han, Yu; Nagao, Daisuke; Kamezawa, Nao; Ishii, Haruyuki; Konno, Mikio

2016-01-01

Highlights: • Dielectric barium titanate (BT) nanoparticles incorporated into luminescence films. • Luminescence intensities increased by the BT nanoparticle incorporation. • Incorporation of highly dielectric nanoparticles effective for luminescence enhancement. - Abstract: Incorporation of highly dielectric nanoparticles into luminescent ZnO-polymethylmethacrylate (PMMA) nanocomposite films was undertaken to examine the effect of nanoparticle incorporation on luminescence intensity of the nanocomposite films. ZnO nanoparticles were prepared as inorganic phosphors by a precipitation method. The ZnO nanoparticles were then surface-modified with 3-methacryloxypropyltrimethoxysilane (MPTMS) to be used for fabrication of the ZnO-PMMA nanocomposite film. Barium titanate (BT) nanoparticles were synthesized with a sol-gel method as the highly dielectric nanoparticles, which were also surface-modified with the MPTMS for the incorporation into the nanocomposite films. Luminescence intensity of the nanocomposite films was successfully increased by the nanoparticle incorporation up to a BT content around 15 vol%. The luminescence intensity higher than that measured for the nanocomposite films incorporating SiO_2 nanoparticles indicated that the incorporation of highly dielectric nanoparticles was an effective approach to enhance the luminescence of ZnO nanoparticles in the polymer thin films.

75 FR 45583 - New York: Incorporation by Reference of State Hazardous Waste Management Program

Science.gov (United States)

2010-08-03

...: Incorporation by Reference of State Hazardous Waste Management Program AGENCY: Environmental Protection Agency... authorized hazardous waste program which is set forth in the regulations entitled ``Approved State Hazardous Waste Management Programs'', New York's authorized hazardous waste program. EPA will incorporate by...

77 FR 59879 - Idaho: Incorporation by Reference of Approved State Hazardous Waste Management Program

Science.gov (United States)

2012-10-01

...: Incorporation by Reference of Approved State Hazardous Waste Management Program AGENCY: Environmental Protection... ``Approved State Hazardous Waste Management Programs,'' Idaho's authorized hazardous waste program. The EPA... Federal Register, the EPA is codifying and incorporating by reference the State's hazardous waste program...

Noxious facility impact projection: Incorporating the effects of risk aversion

International Nuclear Information System (INIS)

Nieves, L.A.

1993-01-01

Developing new sites for noxious facilities has become a complex process with many potential pitfalls. In addition to the need to negotiate conditions acceptable to the host community, siting success may depend on the facility proposer's ability to identify a candidate site that not only meets technical requirements, but that is located in a community or region whose population is not highly averse to the risks associated with the type of facility being proposed. Success may also depend on the proposer accurately assessing potential impacts of the facility and offering an equitable compensation package to the people affected by it. Facility impact assessments, as typically performed, include only the effects of changes in population, employment and economic activity associated with facility construction and operation. Because of their scope, such assessments usually show a short-run, net economic benefit for the host region, making the intensely negative public reaction to some types and locations of facilities seem unreasonable. The impact component excluded from these assessments is the long-run economic effect of public perceptions of facility risk and nuisance characteristics. Recent developments in psychological and economic measurement techniques have opened the possibility of correcting this flaw by incorporating public perceptions in projections of economic impacts from noxious facilities

INTERIM REPORT IMPROVED METHODS FOR INCORPORATING RISK IN DECISION MAKING

Energy Technology Data Exchange (ETDEWEB)

Clausen, M. J.; Fraley, D. W.; Denning, R. S.

1980-08-01

This paper reports observations and preliminary investigations in the first phase of a research program covering methodologies for making safety-related decisions. The objective has been to gain insight into NRC perceptions of the value of formal decision methods, their possible applications, and how risk is, or may be, incorporated in decision making. The perception of formal decision making techniques, held by various decision makers, and what may be done to improve them, were explored through interviews with NRC staff. An initial survey of decision making methods, an assessment of the applicability of formal methods vis-a-vis the available information, and a review of methods of incorporating risk and uncertainty have also been conducted.

Transient stability risk assessment of power systems incorporating wind farms

DEFF Research Database (Denmark)

Miao, Lu; Fang, Jiakun; Wen, Jinyu

2013-01-01

fed induction generator has been established. Wind penetration variation and multiple stochastic factors of power systems have been considered. The process of transient stability risk assessment based on the Monte Carlo method has been described and a comprehensive risk indicator has been proposed......Large-scale wind farm integration has brought several aspects of challenges to the transient stability of power systems. This paper focuses on the research of the transient stability of power systems incorporating with wind farms by utilizing risk assessment methods. The detailed model of double....... An investigation has been conducted into an improved 10-generator 39-bus system with a wind farm incorporated to verify the validity and feasibility of the risk assessment method proposed....

Si Incorporation in InP Nanowires Grown by Au-Assisted Molecular Beam Epitaxy

Directory of Open Access Journals (Sweden)

Lorenzo Rigutti

2009-01-01

Full Text Available We report on the growth, structural characterization, and conductivity studies of Si-doped InP nanowires grown by Au-assisted molecular beam epitaxy. It is shown that Si doping reduces the mean diffusion length of adatoms on the lateral nanowire surface and consequently reduces the nanowire growth rate and promotes lateral growth. A resistivity as low as 5.1±0.3×10−5 Ω⋅cm is measured for highly doped nanowires. Two dopant incorporation mechanisms are discussed: incorporation via catalyst particle and direct incorporation on the nanowire sidewalls. The first mechanism is shown to be less efficient than the second one, resulting in inhomogeneous radial dopant distribution.

The temperature dependence of atomic incorporation characteristics in growing GaInNAs films

International Nuclear Information System (INIS)

Li, Jingling; Gao, Fangliang; Wen, Lei; Zhou, Shizhong; Zhang, Shuguang; Li, Guoqiang

2015-01-01

We have systematically studied the temperature dependence of incorporation characteristics of nitrogen (N) and indium (In) in growing GaInNAs films. With the implementation of Monte-Carlo simulation, the low N adsorption energy (−0.10 eV) is demonstrated. To understand the atomic incorporation mechanism, temperature dependence of interactions between Group-III and V elements are subsequently discussed. We find that the In incorporation behaviors rather than that of N are more sensitive to the T g , which can be experimentally verified by exploring the compositional modulation and structural changes of the GaInNAs films by means of high-resolution X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscope, and secondary ion mass spectroscopy

Paired Straight Hearth Furnace - Transformational Ironmaking Process

Energy Technology Data Exchange (ETDEWEB)

Lu, Wei-Kao [McMaster Univ., Hamilton, ON (Canada); Debski, Paul [Andritz Metals Inc.,Canonsburg, PA (United States)

2014-11-19

The U. S. steel industry has reduced its energy intensity per ton of steel shipped by 33% since 1990. However, further significant gains in energy efficiency will require the development of new, transformational iron and steelmaking processes. The Paired Straight Hearth Furnace (PSH) process is an emerging alternative high productivity, direct reduced iron (DRI) technology that may achieve very low fuel rates and has the potential to replace blast furnace ironmaking. The PSH furnace can operate independently or may be coupled with other melting technologies to produce liquid hot metal that is both similar to blast furnace iron and suitable as a feedstock for basic oxygen steelmaking furnaces. The PSH process uses non-metallurgical coal as a reductant to convert iron oxides such as iron ore and steelmaking by-product oxides to DRI pellets. In this process, a multi-layer, nominally 120mm tall bed of composite “green balls” made from oxide, coal and binder is built up and contained within a moving refractory hearth. The pellet bed absorbs radiant heat energy during exposure to the high temperature interior refractory surfaces of the PSH while generating a strongly reducing gas atmosphere in the bed that yields a highly metalized DRI product. The PSH concept has been well tested in static hearth experiments. A moving bed design is being developed. The process developers believe that if successful, the PSH process has the potential to replace blast furnaces and coke ovens at a fraction of the operating and capital cost while using about 30% less energy relative to current blast furnace technology. DRI output could also feed electric arc furnaces (EAFs) by displacing a portion of the scrap charge.

Incorporating rural users in small-scale growing container ...

African Journals Online (AJOL)

If the users of products developed for them are incorporated in the design process it is more likely that an acceptable and usable outcome will be achieved. A user-centred design process places a stronger emphasis on user involvement. In cases where the users live far away from the design facilities, certain logistical and ...

Covalent modification of serum transferrin with phospholipid and incorporation into liposomal membranes

DEFF Research Database (Denmark)

Afzelius, P; Demant, E J; Hansen, Gert Helge

1989-01-01

A method is described for incorporation of water-soluble proteins into liposomal membranes using covalent protein-phospholipid conjugates in detergent solution. A disulfide derivative of phosphatidylethanolamine containing a reactive N-hydroxysuccinimide ester group is synthesized, and the deriva......A method is described for incorporation of water-soluble proteins into liposomal membranes using covalent protein-phospholipid conjugates in detergent solution. A disulfide derivative of phosphatidylethanolamine containing a reactive N-hydroxysuccinimide ester group is synthesized...

Stateless Malware Packet Detection by Incorporating Naive Bayes with Known Malware Signatures

Directory of Open Access Journals (Sweden)

Ismahani Ismail

2014-01-01

Full Text Available Malware detection done at the network infrastructure level is still an open research problem ,considering the evolution of malwares and high detection accuracy needed to detect these threats. Content based classification techniques have been proven capable of detecting malware without matching for malware signatures. However, the performance of the classification techniques depends on observed training samples. In this paper, a new detection method that incorporates Snort malware signatures into Naive Bayes model training is proposed. Through experimental work, we prove that the proposed work results in low features search space for effective detection at the packet level. This paper also demonstrates the viability of detecting malware at the stateless level (using packets as well as at the stateful level (using TCP byte stream. The result shows that it is feasible to detect malware at the stateless level with similar accuracy to the stateful level, thus requiring minimal resource for implementation on middleboxes. Stateless detection can give a better protection to end users by detecting malware on middleboxes without having to reconstruct stateful sessions and before malwares reach the end users.

Ankara National Textiles [Turkish] Incorporated Company (1916-1930

Directory of Open Access Journals (Sweden)

M. Bülent Varlık

2014-06-01

Full Text Available This study aims to provide brief information on the foundation, activities and closing down of Ankara National Textiles Incorporated Company, which was founded by a group of local tradesmen in Ankara within the scope of the “National Economy Policy” implemented by the Union and Progress Association. The aforementioned local tradesmen undertook the first steps to establish a factory in mid-1913, and as a result of these efforts, the aforementioned incorporated Company was founded in 1916. This Company, probably due to a low quality production, was closed down, possibly around the years 1921-1922. In 1925, a reconstruction process was initiated with the intervention of the politics and bureaucracy of Ankara, and the capital of the Company was increased. However, these attempts failed and finally, the Company was closed down in 1928. The factory was acquired by Türkiye İş Bankası in 1930, and after the endeavors, it continued its activities as a new company under the name Yün-İş.

Effect of Phosphorus-32 Incorporated into Chick Embryo

Energy Technology Data Exchange (ETDEWEB)

Szabo, L. D.; Antoni, F.; Koeteles, G. J.; Holland, J.; Hidvegi, E. J.; Varteresz, V. [Frederic Joliot-Curie National Research Institute for Radiobiology and Radiohygiene, Budapest (Hungary)

1968-06-15

The bilogical effects of {sup 32}P on the viability and development of chick embryo were studied. 200,100 and 50 {mu}Ci per egg killed the embryos during incubation. Growth retardation preceded their death. 25 {mu}Ci per egg, however, did not cause mortality until hatching. An attempt was made to correlate the observed effects with the radiation dose and the number of {sup 32}P atoms incorporated into DNA and therefore, the frequencies of radiophosphorus atoms in the polynucleotide chains of DNA and RNA were determined under various conditions. Some biochemical consequences of the decay of {sup 32}P incorporated into ribonucleic acids were demonstrated. Structural changes of RNA were observed. Parallel with structural changes, functional alterations of various kinds of RNA molecules were demonstrated in isolated ribosomal systems. The decrease in protein synthesis by liver ribosomes was found to be proportional to the number of decayed intramolecular {sup 32}P atoms. The structural and functional changes of ribonucleic acids observed on molecular and sub-cellular levels could be attributed to nuclear transmutation of {sup 32}P. (author)

Incorporating Financial Stability in Inflation Targeting Frameworks

OpenAIRE

Burcu Aydin; Engin Volkan

2011-01-01

The global financial crisis has exposed the limitations of a conventional inflation targeting (IT) framework in insulating an economy from shocks, and demonstrated that its rigid application may aggravate the effect of shocks on output and inflation. Accordingly, we investigate possible refinements to the IT framework by incorporating financial stability considerations. We propose a small open economy DSGE model, calibrated for Korea during the period of 2003 - 07, with real and financial fri...

Safety Design Approach for the Development of Safety Requirements for Design of Commercial HTGR

International Nuclear Information System (INIS)

Ohashi, Hirofumi; Sato, Hiroyuki; Nakagawa, Shigeaki; Tachibana, Yukio; Nishihara, Tetsuo; Yan, Xing; Sakaba, Nariaki; Kunitomi, Kazuhiko

2014-01-01

The research committee on “Safety requirements for HTGR design” was established in 2013 under the Atomic Energy Society of Japan to develop the draft safety requirements for the design of commercial High Temperature Gas-cooled Reactors (HTGRs), which incorporate the HTGR safety features demonstrated using the High Temperature Engineering Test Reactor (HTTR), lessons learned from the accident of Fukushima Daiichi Nuclear Power Station and requirements for the integration of the hydrogen production plants. The safety design approach for the commercial HTGRs which is a basement of the safety requirements is determined prior to the development of the safety requirements. The safety design approaches for the commercial HTGRs are to confine the radioactive materials within the coated fuel particles not only during normal operation but also during accident conditions, and the integrity of the coated fuel particles and other requiring physical barriers are protected by the inherent and passive safety features. This paper describes the main topics of the research committee, the safety design approaches and the safety functions of the commercial HTGRs determined in the research committee. (author)

Rumen microbial growth estimation using in vitro radiophosphorous incorporation technique

International Nuclear Information System (INIS)

Bueno, Ives Claudio da Silva; Machado, Mariana de Carvalho; Cabral Filho, Sergio Lucio Salomon; Gobbo, Sarita Priscila; Vitti, Dorinha Miriam Silber Schmidt; Abdalla, Adibe Luiz

2002-01-01

Rumen microorganisms are able to transform low biological value nitrogen of feed stuff into high quality protein. To determine how much microbial protein that process forms, radiomarkers can be used. Radiophosphorous has been used to mark microbial protein, as element P is present in all rumen microorganisms (as phospholipids) and the P:N ratio of rumen biomass is quite constant. The aim of this work was to estimate microbial synthesis from feedstuff commonly used in ruminant nutrition in Brazil. Tested feeds were fresh alfalfa, raw sugarcane bagasse, rice hulls, rice meal, soybean meal, wheat meal, Tifton hay, leucaena, dehydrated citrus pulp, wet brewers' grains and cottonseed meal. 32 P-labelled phosphate solution was used as marker for microbial protein. Results showed the diversity of feeds by distinct quantities of nitrogen incorporated into microbial mass. Low nutrient availability feeds (sugarcane bagasse and rice hulls) promoted the lowest values of incorporated nitrogen. Nitrogen incorporation showed positive relationship (r=0.56; P=0.06) with the rate of degradation and negative relationship (r=-0.59; P<0.05) with fiber content of feeds. The results highlight that easier fermentable feeds (higher rates of degradation) and/or with lower fiber contents promote a more efficient microbial growth and better performance for the host animal. (author)

Rumen microbial growth estimation using in vitro radiophosphorous incorporation technique

Energy Technology Data Exchange (ETDEWEB)

Bueno, Ives Claudio da Silva; Machado, Mariana de Carvalho; Cabral Filho, Sergio Lucio Salomon; Gobbo, Sarita Priscila; Vitti, Dorinha Miriam Silber Schmidt; Abdalla, Adibe Luiz [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)

2002-07-01

Rumen microorganisms are able to transform low biological value nitrogen of feed stuff into high quality protein. To determine how much microbial protein that process forms, radiomarkers can be used. Radiophosphorous has been used to mark microbial protein, as element P is present in all rumen microorganisms (as phospholipids) and the P:N ratio of rumen biomass is quite constant. The aim of this work was to estimate microbial synthesis from feedstuff commonly used in ruminant nutrition in Brazil. Tested feeds were fresh alfalfa, raw sugarcane bagasse, rice hulls, rice meal, soybean meal, wheat meal, Tifton hay, leucaena, dehydrated citrus pulp, wet brewers' grains and cottonseed meal. {sup 32} P-labelled phosphate solution was used as marker for microbial protein. Results showed the diversity of feeds by distinct quantities of nitrogen incorporated into microbial mass. Low nutrient availability feeds (sugarcane bagasse and rice hulls) promoted the lowest values of incorporated nitrogen. Nitrogen incorporation showed positive relationship (r=0.56; P=0.06) with the rate of degradation and negative relationship (r=-0.59; P<0.05) with fiber content of feeds. The results highlight that easier fermentable feeds (higher rates of degradation) and/or with lower fiber contents promote a more efficient microbial growth and better performance for the host animal. (author)

Licensing evaluation of CANDU-PHW nuclear power plants relative to U.S. regulatory requirements

International Nuclear Information System (INIS)

Erp, J.B. van

1978-01-01

Differences between the U.S. and Canadian approach to safety and licensing are discussed. U.S. regulatory requirements are evaluated as regards their applicability to CANDU-PHW reactors; vice-versa the CANDU-PHW reactor is evaluated with respect to current Regulatory Requirements and Guides. A number of design modifications are proposed to be incorporated into the CANDU-PHW reactor in order to facilitate its introduction into the U.S. These modifications are proposed solely for the purpose of maintaining consistency within the current U.S. regulatory system and not out of a need to improve the safety of current-design CANDU-PHW nuclear power plants. A number of issues are identified which still require resolution. Most of these issues are concerned with design areas not (yet) covered by the ASME code. (author)

Incorporating Measurement Error from Modeled Air Pollution Exposures into Epidemiological Analyses.

Science.gov (United States)

Samoli, Evangelia; Butland, Barbara K

2017-12-01

Outdoor air pollution exposures used in epidemiological studies are commonly predicted from spatiotemporal models incorporating limited measurements, temporal factors, geographic information system variables, and/or satellite data. Measurement error in these exposure estimates leads to imprecise estimation of health effects and their standard errors. We reviewed methods for measurement error correction that have been applied in epidemiological studies that use model-derived air pollution data. We identified seven cohort studies and one panel study that have employed measurement error correction methods. These methods included regression calibration, risk set regression calibration, regression calibration with instrumental variables, the simulation extrapolation approach (SIMEX), and methods under the non-parametric or parameter bootstrap. Corrections resulted in small increases in the absolute magnitude of the health effect estimate and its standard error under most scenarios. Limited application of measurement error correction methods in air pollution studies may be attributed to the absence of exposure validation data and the methodological complexity of the proposed methods. Future epidemiological studies should consider in their design phase the requirements for the measurement error correction method to be later applied, while methodological advances are needed under the multi-pollutants setting.

Autoradiographic study of 3H-proline incorporation by rat periodontal ligament, gingival connective tissue and dental pulp

International Nuclear Information System (INIS)

Kameyama, Y.

1975-01-01

The rates of 3 H-proline incorporation by the rat periodontal ligament, the gingival connective tissue and the dental pulp were studied by autoradiography. The rate of 3 H-proline incorporation by the periodontal ligament was 2.8 times higher than by the gingival connective tissue and 5 times higher than by the dental pulp. These differences were significant (p 3 H-proline incorporation by the periodontal ligament was significantly different (p 3 H-proline incorporation. The ratio of the rates of 3 H-proline incorporation by the three tissues did not correlate with the ratio of the cellular densities in the same three tissues. (author)

Incorporation of 15N-inorganic nitrogen into free-amino acids in germinating corn

International Nuclear Information System (INIS)

Samukawa, Kisaburo; Yamaguchi, Masuro

1979-01-01

Incorporation of 15 N-labeled compounds, (K 15 NO 3 ) and ( 15 NH 4 ) 2 SO 4 , into free-amino acids was measured in germinating corn. Sterilized seeds of sweet corn (Choko No. 865) were sown on the filter papers soaked in 10 ml of the solution containing one of the labeled compounds (40 ppm N, 99 atom % excess) in petri dishes and germinated at 30 deg C. After 48 hours and 72 hours, 15 N-incorporation was measured in 5 seedlings selected owing to uniform growth. A GC-MS was used for measuring the ratio of 15 N isotopes present in free-amino acids. 15 N incorporation into free-amino acids hardly occurred when corn was germinated in the solution containing K 15 NO 3 , which suggested that endogenous nitrogen was used during the early germination stage of corn when nitrate is present. Incorporation into amino acids was greater when corn was germinated in the medium containing ( 15 NH 4 ) 2 SO 4 , than the case of the solution containing K 15 NO 3 . When corn was germinated in the solution containing ( 15 NH 4 ) 2 SO 4 , assimilation of 15 N into asparagine or aspartic acid was comparatively higher than that into the other amino acids, though the incorporation rate was low. Thus, in intact germinating corn, the hydrolyzed product of protein was utilized for germination with priority, and dependence on exogenous nitrogen was low. (Kaihara, S.)

Calcium incorporation in graphene oxide particles: A morphological, chemical, electrical, and thermal study

Energy Technology Data Exchange (ETDEWEB)

Castro, Kelly L.S. [Instituto Nacional de Metrologia, Qualidade e Tecnologia, Av. Nossa Sra. das Graças, 50, 25250-020 Duque de Caxias (Brazil); Instituto de Química, Universidade Federal do Rio de Janeiro, Av. Athos da Silveira Ramos, 149, 21941-909 Rio de Janeiro (Brazil); Curti, Raphael V.; Araujo, Joyce R.; Landi, Sandra M.; Ferreira, Erlon H.M.; Neves, Rodrigo S.; Kuznetsov, Alexei; Sena, Lidia A. [Instituto Nacional de Metrologia, Qualidade e Tecnologia, Av. Nossa Sra. das Graças, 50, 25250-020 Duque de Caxias (Brazil); Archanjo, Braulio S., E-mail: bsarchanjo@inmetro.gov.br [Instituto Nacional de Metrologia, Qualidade e Tecnologia, Av. Nossa Sra. das Graças, 50, 25250-020 Duque de Caxias (Brazil); Achete, Carlos A. [Instituto Nacional de Metrologia, Qualidade e Tecnologia, Av. Nossa Sra. das Graças, 50, 25250-020 Duque de Caxias (Brazil); Departamento de Engenharia Metalúrgica e de Materiais, Universidade Federal do Rio de Janeiro, 21941-972 Rio de Janeiro (Brazil)

2016-07-01

Surface chemical modification and functionalization are common strategies used to provide new properties or functionalities to a material or to enhance existing ones. In this work, graphene oxide prepared using Hummers' method has been chemically modified with calcium ions by immersion in a calcium carbonate solution. Transmission electron microscopy analyses showed that graphene oxide (GO) and calcium incorporated graphene oxide have a morphology similar to an ultra-thin membrane composed of overlapping sheets. X-ray diffraction and Fourier-infrared spectroscopy show that calcium carbonate residue was completely removed by hydrochloric acid washes. Energy dispersive X-ray spectroscopy mapping showed spatially homogeneous calcium in Ca-incorporated graphene oxide sample after HCl washing. This Ca is mainly ionic according to X-ray photoelectron spectroscopy, and its incorporation promoted a small reduction in the graphene oxide structure, corroborated also by four-point probe measurements. A thermal study shows a remarkable increase in the GO stability with the presence of Ca{sup 2+} ions. - Highlights: • Graphene oxide has been chemically modified with Ca ions by immersion in a CaCO{sub 3} solution. • GO–Ca has morphology similar to an ultra-thin membrane composed of overlapping sheets. • CaCO{sub 3} residue was completely removed by acid washes, leaving only ionic calcium. • EDS maps show that Ca incorporation is spatially homogeneous in GO structure. • Thermal analyses show a remarkable increase in GO stability after Ca incorporation.

Calcium incorporation in graphene oxide particles: A morphological, chemical, electrical, and thermal study

International Nuclear Information System (INIS)

Castro, Kelly L.S.; Curti, Raphael V.; Araujo, Joyce R.; Landi, Sandra M.; Ferreira, Erlon H.M.; Neves, Rodrigo S.; Kuznetsov, Alexei; Sena, Lidia A.; Archanjo, Braulio S.; Achete, Carlos A.

2016-01-01

Surface chemical modification and functionalization are common strategies used to provide new properties or functionalities to a material or to enhance existing ones. In this work, graphene oxide prepared using Hummers' method has been chemically modified with calcium ions by immersion in a calcium carbonate solution. Transmission electron microscopy analyses showed that graphene oxide (GO) and calcium incorporated graphene oxide have a morphology similar to an ultra-thin membrane composed of overlapping sheets. X-ray diffraction and Fourier-infrared spectroscopy show that calcium carbonate residue was completely removed by hydrochloric acid washes. Energy dispersive X-ray spectroscopy mapping showed spatially homogeneous calcium in Ca-incorporated graphene oxide sample after HCl washing. This Ca is mainly ionic according to X-ray photoelectron spectroscopy, and its incorporation promoted a small reduction in the graphene oxide structure, corroborated also by four-point probe measurements. A thermal study shows a remarkable increase in the GO stability with the presence of Ca"2"+ ions. - Highlights: • Graphene oxide has been chemically modified with Ca ions by immersion in a CaCO_3 solution. • GO–Ca has morphology similar to an ultra-thin membrane composed of overlapping sheets. • CaCO_3 residue was completely removed by acid washes, leaving only ionic calcium. • EDS maps show that Ca incorporation is spatially homogeneous in GO structure. • Thermal analyses show a remarkable increase in GO stability after Ca incorporation.

Translation system engineering in Escherichia coli enhances non-canonical amino acid incorporation into proteins.

Science.gov (United States)

Gan, Rui; Perez, Jessica G; Carlson, Erik D; Ntai, Ioanna; Isaacs, Farren J; Kelleher, Neil L; Jewett, Michael C

2017-05-01

The ability to site-specifically incorporate non-canonical amino acids (ncAAs) into proteins has made possible the study of protein structure and function in fundamentally new ways, as well as the bio synthesis of unnatural polymers. However, the task of site-specifically incorporating multiple ncAAs into proteins with high purity and yield continues to present a challenge. At the heart of this challenge lies the lower efficiency of engineered orthogonal translation system components compared to their natural counterparts (e.g., translation elements that specifically use a ncAA and do not interact with the cell's natural translation apparatus). Here, we show that evolving and tuning expression levels of multiple components of an engineered translation system together as a whole enhances ncAA incorporation efficiency. Specifically, we increase protein yield when incorporating multiple p-azido-phenylalanine(pAzF) residues into proteins by (i) evolving the Methanocaldococcus jannaschii p-azido-phenylalanyl-tRNA synthetase anti-codon binding domain, (ii) evolving the elongation factor Tu amino acid-binding pocket, and (iii) tuning the expression of evolved translation machinery components in a single vector. Use of the evolved translation machinery in a genomically recoded organism lacking release factor one enabled enhanced multi-site ncAA incorporation into proteins. We anticipate that our approach to orthogonal translation system development will accelerate and expand our ability to site-specifically incorporate multiple ncAAs into proteins and biopolymers, advancing new horizons for synthetic and chemical biotechnology. Biotechnol. Bioeng. 2017;114: 1074-1086. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

De novo and salvage pathway precursor incorporation during DNA replication at the nuclear matrix

International Nuclear Information System (INIS)

Panzeter, P.L.

1988-01-01

Total nuclear DNA can be empirically subdivided into low salt-soluble (LS) DNA (75-80%), high salt-soluble (HS) DNA (18-23%), and nuclear matrix-associated (NM) DNA which remains tightly bound to the nuclear matrix (∼2%). The most-newly replicated DNA is that associated with the nuclear matrix in regenerating rat liver. Analyses of the DNA fractions after various pulse times revealed that the salvage and de novo pathway DNA precursors investigated were incorporated preferentially into NM-DNA at early pulse times, after which the radioactivity became progressively incorporated into HS- and LS-DNA, respectively. These results support two models of nuclear matrix-associated DNA replication, proposed previously, and a third model presented in this dissertation. In addition, the incorporation of de novo pathway precursors lagged significantly (> 10 minutes) behind the incorporation of precursors entering through the salvage pathway. Channeling of salvage pathway precursors to DNA replication sites would explain the more rapid uptake of salvage precursors into NM-DNA than de novo precursors. To investigate the possibility of this heretofore in vitro phenomenon, the incorporation of the salvage precursor, ( 3 H)deoxythymidine, and the de novo precursor, ( 14 C)orotic acid, into NM-DNA and dTTP was examined in regenerating rat liver. There was no significant difference between the incorporation pattern of ( 14 C)orotic acid into NM-DNA thymine and that of ( 14 C)orotic acid into soluble dTTP. Contrastingly, the salvage pathway precursor, ( 3 H)deoxythymidine, labeled NM-DNA before labeling the dTTP pool

The Incorporation of Ribonucleotides Induces Structural and Conformational Changes in DNA.

Science.gov (United States)

Meroni, Alice; Mentegari, Elisa; Crespan, Emmanuele; Muzi-Falconi, Marco; Lazzaro, Federico; Podestà, Alessandro

2017-10-03

Ribonucleotide incorporation is the most common error occurring during DNA replication. Cells have hence developed mechanisms to remove ribonucleotides from the genome and restore its integrity. Indeed, the persistence of ribonucleotides into DNA leads to severe consequences, such as genome instability and replication stress. Thus, it becomes important to understand the effects of ribonucleotides incorporation, starting from their impact on DNA structure and conformation. Here we present a systematic study of the effects of ribonucleotide incorporation into DNA molecules. We have developed, to our knowledge, a new method to efficiently synthesize long DNA molecules (hundreds of basepairs) containing ribonucleotides, which is based on a modified protocol for the polymerase chain reaction. By means of atomic force microscopy, we could therefore investigate the changes, upon ribonucleotide incorporation, of the structural and conformational properties of numerous DNA populations at the single-molecule level. Specifically, we characterized the scaling of the contour length with the number of basepairs and the scaling of the end-to-end distance with the curvilinear distance, the bending angle distribution, and the persistence length. Our results revealed that ribonucleotides affect DNA structure and conformation on scales that go well beyond the typical dimension of the single ribonucleotide. In particular, the presence of ribonucleotides induces a systematic shortening of the molecules, together with a decrease of the persistence length. Such structural changes are also likely to occur in vivo, where they could directly affect the downstream DNA transactions, as well as interfere with protein binding and recognition. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

77 FR 63308 - J. William Foley Incorporated v. United Illuminating Company; Notice of Complaint

Science.gov (United States)

2012-10-16

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. EL12-106-000] J. William Foley Incorporated v. United Illuminating Company; Notice of Complaint Take notice that on October 5...) and 825(e), J. William Foley Incorporated (Complainant) filed a formal complaint against United...

Corrosion behaviour of nanometre sized cerium oxide and titanium oxide incorporated aluminium in NaCl solution

International Nuclear Information System (INIS)

Ashraf, P. Muhamed; Edwin, Leela

2013-01-01

Highlights: ► Corrosion resistant aluminium incorporated with nano oxides of cerium and titanium. ► 0.2% nano CeO 2 and 0.05% nano TiO 2 showed increased corrosion resistance. ► Nano TiO 2 concentration influenced the optimum performance of the material. ► Comparison of Micro and nano CeO 2 and TiO 2 aluminium showed the latter is best. - Abstract: The study highlights the development of an aluminium matrix composite by incorporating mixture of nanometre sized cerium oxide and titanium oxide in pure aluminium and its corrosion resistance in marine environment. The mixed nanometre sized oxides incorporated aluminium exhibited improved microstructure and excellent corrosion resistance. Corrosion resistance depends on the concentration of nanometre sized titanium oxide. Electrochemical characteristics improved several folds in nanometre sized mixed oxides incorporated aluminium than micrometre sized oxides incorporated aluminium.

Visual soil evaluation - future research requirements

Science.gov (United States)

Emmet-Booth, Jeremy; Forristal, Dermot; Fenton, Owen; Ball, Bruce; Holden, Nick

2017-04-01

A review of Visual Soil Evaluation (VSE) techniques (Emmet-Booth et al., 2016) highlighted their established utility for soil quality assessment, though some limitations were identified; (1) The examination of aggregate size, visible intra-porosity and shape forms a key assessment criterion in almost all methods, thus limiting evaluation to structural form. The addition of criteria that holistically examine structure may be desirable. For example, structural stability can be indicated using dispersion tests or examining soil surface crusting, while the assessment of soil colour may indirectly indicate soil organic matter content, a contributor to stability. Organic matter assessment may also indicate structural resilience, along with rooting, earthworm numbers or shrinkage cracking. (2) Soil texture may influence results or impeded method deployment. Modification of procedures to account for extreme texture variation is desirable. For example, evidence of compaction in sandy or single grain soils greatly differs to that in clayey soils. Some procedures incorporate separate classification systems or adjust deployment based on texture. (3) Research into impacts of soil moisture content on VSE evaluation criteria is required. Criteria such as rupture resistance and shape may be affected by moisture content. It is generally recommended that methods are deployed on moist soils and quantification of influences of moisture variation on results is necessary. (4) Robust sampling strategies for method deployment are required. Dealing with spatial variation differs between methods, but where methods can be deployed over large areas, clear instruction on sampling is required. Additionally, as emphasis has been placed on the agricultural production of soil, so the ability of VSE for exploring structural quality in terms of carbon storage, water purification and biodiversity support also requires research. References Emmet-Booth, J.P., Forristal. P.D., Fenton, O., Ball, B

A Next-Generation Sequencing Approach Uncovers Viral Transcripts Incorporated in Poxvirus Virions

Directory of Open Access Journals (Sweden)

Marica Grossegesse

2017-10-01

Full Text Available Transcripts are known to be incorporated in particles of DNA viruses belonging to the families of Herpesviridae and Mimiviridae, but the presence of transcripts in other DNA viruses, such as poxviruses, has not been analyzed yet. Therefore, we first established a next-generation-sequencing (NGS-based protocol, enabling the unbiased identification of transcripts in virus particles. Subsequently, we applied our protocol to analyze RNA in an emerging zoonotic member of the Poxviridae family, namely Cowpox virus. Our results revealed the incorporation of 19 viral transcripts, while host identifications were restricted to ribosomal and mitochondrial RNA. Most viral transcripts had an unknown and immunomodulatory function, suggesting that transcript incorporation may be beneficial for poxvirus immune evasion. Notably, the most abundant transcript originated from the D5L/I1R gene that encodes a viral inhibitor of the host cytoplasmic DNA sensing machinery.