Connection between Einstein equations, nonlinear sigma models, and self-dual Yang-Mills theory

International Nuclear Information System (INIS)

Sanchez, N.; Whiting, B.

1986-01-01

The authors analyze the connection between nonlinear sigma models self-dual Yang-Mills theory, and general relativity (self-dual and non-self-dual, with and without killing vectors), both at the level of the equations and at the level of the different type of solutions (solitons and calorons) of these theories. They give a manifestly gauge invariant formulation of the self-dual gravitational field analogous to that given by Yang for the self-dual Yang-Mills field. This formulation connects in a direct and explicit way the self-dual Yang-Mills and the general relativity equations. They give the ''R gauge'' parametrization of the self-dual gravitational field (which corresponds to modified Yang's-type and Ernst equations) and analyze the correspondence between their different types of solutions. No assumption about the existence of symmetries in the space-time is needed. For the general case (non-self-dual), they show that the Einstein equations contain an O nonlinear sigma model. This connection with the sigma model holds irrespective of the presence of symmetries in the space-time. They found a new class of solutions of Einstein equations depending on holomorphic and antiholomorphic functions and we relate some subclasses of these solutions to solutions of simpler nonlinear field equations that are well known in other branches of physics, like sigma models, SineGordon, and Liouville equations. They include gravitational plane wave solutions. They analyze the response of different accelerated quantum detector models, compare them to the case when the detectors are linterial in an ordinary Planckian gas at a given temperature, and discuss the anisotropy of the detected response for Rindler observers

Non-renormalizability of supersymmetric non-linear sigma models in four dimensions

International Nuclear Information System (INIS)

Spence, B.

1985-01-01

The one-loop, on-shell, ultraviolet-divergent part of the effective action is calculated for the N=1 and 2 supersymmetric non-linear sigma models in four dimensions. These infinities cannot be absorbed into a redefinition of the bare Kaehler potential and the theories are not renormalizable. (orig.)

Dynamical generation of gauge bosons of hidden local symmetries in nonlinear sigma models

International Nuclear Information System (INIS)

Koegerler, R.; Lucha, W.; Neufeld, H.; Stremnitzer, H.

1988-01-01

We demonstrate how quantum corrections generate a kinetic term for the (at tree-level non-propagating) gauge fields of hidden local symmetries in nonlinear sigma models in four space-time dimensions. (orig.)

On the structure on non-local conservation laws in the two-dimensional non-linear sigma-model

International Nuclear Information System (INIS)

Zamolodchikov, Al.B.

1978-01-01

The non-local conserved charges are supposed to satisfy a special multiplicative law in the space of asymptotic states of the non-linear sigma-model. This supposition leads to factorization equations for two-particle scattering matrix elements and determines to some extent the action of these charges in the asymptotic space. Their conservation turns out to be consistent with the factorized S-matrix of the non-linear sigma-model. It is shown also that the factorized sine-Gordon S-matrix is consistent with a similar family of conservation laws

Torsion-induced gauge superfield mass generation for gauge-invariant non-linear. sigma. -models

Energy Technology Data Exchange (ETDEWEB)

Helayel-Neto, J.A. (Centro Brasileiro de Pesquisas Fisicas, Rio de Janeiro Universidade Catolica de Petropolis, RJ (Brazil)); Mokhtari, S. (International Centre for Theoretical Physics, Trieste (Italy)); Smith, A.W. (Universidade Catolica de Petropolis, RJ (Brazil))

1989-12-21

It is shown that the explicit breaking of (1,0)-supersymmetry by means of a torsion-like term yields dynamical mass generation for the gauge superfields which couple to a (1,0)-supersymmetric non-linear {sigma}-model. (orig.).

Nonlinear consider covariance analysis using a sigma-point filter formulation

Science.gov (United States)

Lisano, Michael E.

2006-01-01

The research reported here extends the mathematical formulation of nonlinear, sigma-point estimators to enable consider covariance analysis for dynamical systems. This paper presents a novel sigma-point consider filter algorithm, for consider-parameterized nonlinear estimation, following the unscented Kalman filter (UKF) variation on the sigma-point filter formulation, which requires no partial derivatives of dynamics models or measurement models with respect to the parameter list. It is shown that, consistent with the attributes of sigma-point estimators, a consider-parameterized sigma-point estimator can be developed entirely without requiring the derivation of any partial-derivative matrices related to the dynamical system, the measurements, or the considered parameters, which appears to be an advantage over the formulation of a linear-theory sequential consider estimator. It is also demonstrated that a consider covariance analysis performed with this 'partial-derivative-free' formulation yields equivalent results to the linear-theory consider filter, for purely linear problems.

Bound state solution of the Grassmannian nonlinear sigma model with fermions

International Nuclear Information System (INIS)

Abdalla, E.; Lima-Santos, A.

1987-11-01

We construct the s matrix for bound state (gauge-invariant) scattering for nonlinear sigma models defined on the manifold SU(N)/S(U(p)x (lower casex)U(n-p)) with fermions. It is not possible to compute gauge non-singlet matrix elements. In the present language they are not submitted to sufficiently many constraints derived from higher conservation laws. (author) [pt

Nonlinear sigma-models and their gauging in and out of superspace

International Nuclear Information System (INIS)

Hull, C.M.; California Univ., Santa Barbara; Karlhede, A.; Lindstroem, U.; Rocek, M.

1986-01-01

We analyze and generalize bosonic nonlinear sigma-models and their N=1,2 supersymmetric extensions in (4 spacetime-dimensional) N=1 superspace. We give a general construction of nonminimal kinetic terms for gauge fields and of N=1,2 gauging of isometries on Kaehler and hyper-Kaehler manifolds. In particular, we study the gauging of noncompact groups. We derive the complete component action and supertrace formula. For N=2 models, the supertrace always vanishes. (orig.)

Revisiting the O(3) non-linear sigma model and its Pohlmeyer reduction

Energy Technology Data Exchange (ETDEWEB)

Pastras, Georgios [NCSR ' ' Demokritos' ' , Institute of Nuclear and Particle Physics, Attiki (Greece)

2018-01-15

It is well known that sigma models in symmetric spaces accept equivalent descriptions in terms of integrable systems, such as the sine-Gordon equation, through Pohlmeyer reduction. In this paper, we study the mapping between known solutions of the Euclidean O(3) non-linear sigma model, such as instantons, merons and elliptic solutions that interpolate between the latter, and solutions of the Pohlmeyer reduced theory, namely the sinh-Gordon equation. It turns out that instantons do not have a counterpart, merons correspond to the ground state, while the class of elliptic solutions is characterized by a two to one correspondence between solutions in the two descriptions. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Nonlinear sigma models with compact hyperbolic target spaces

Energy Technology Data Exchange (ETDEWEB)

Gubser, Steven [Joseph Henry Laboratories, Princeton University, Princeton, NJ 08544 (United States); Saleem, Zain H. [Department of Physics and Astronomy, University of Pennsylvania,Philadelphia, PA 19104 (United States); National Center for Physics, Quaid-e-Azam University Campus,Islamabad 4400 (Pakistan); Schoenholz, Samuel S. [Department of Physics and Astronomy, University of Pennsylvania,Philadelphia, PA 19104 (United States); Stoica, Bogdan [Walter Burke Institute for Theoretical Physics, California Institute of Technology,452-48, Pasadena, CA 91125 (United States); Stokes, James [Department of Physics and Astronomy, University of Pennsylvania,Philadelphia, PA 19104 (United States)

2016-06-23

We explore the phase structure of nonlinear sigma models with target spaces corresponding to compact quotients of hyperbolic space, focusing on the case of a hyperbolic genus-2 Riemann surface. The continuum theory of these models can be approximated by a lattice spin system which we simulate using Monte Carlo methods. The target space possesses interesting geometric and topological properties which are reflected in novel features of the sigma model. In particular, we observe a topological phase transition at a critical temperature, above which vortices proliferate, reminiscent of the Kosterlitz-Thouless phase transition in the O(2) model V.L. Berezinskii, Destruction of long-range order in one-dimensional and two-dimensional systems having a continuous symmetry group II. Quantum systems, Sov. Phys. JETP 34 (1972) 610. J.M. Kosterlitz and D.J. Thouless, Ordering, metastability and phase transitions in two-dimensional systems, J. Phys. C 6 (1973) 1181 [http://inspirehep.net/search?p=find+J+%22J.Phys.,C6,1181%22]. . Unlike in the O(2) case, there are many different types of vortices, suggesting a possible analogy to the Hagedorn treatment of statistical mechanics of a proliferating number of hadron species. Below the critical temperature the spins cluster around six special points in the target space known as Weierstrass points. The diversity of compact hyperbolic manifolds suggests that our model is only the simplest example of a broad class of statistical mechanical models whose main features can be understood essentially in geometric terms.

Nonlinear sigma models with compact hyperbolic target spaces

International Nuclear Information System (INIS)

Gubser, Steven; Saleem, Zain H.; Schoenholz, Samuel S.; Stoica, Bogdan; Stokes, James

2016-01-01

We explore the phase structure of nonlinear sigma models with target spaces corresponding to compact quotients of hyperbolic space, focusing on the case of a hyperbolic genus-2 Riemann surface. The continuum theory of these models can be approximated by a lattice spin system which we simulate using Monte Carlo methods. The target space possesses interesting geometric and topological properties which are reflected in novel features of the sigma model. In particular, we observe a topological phase transition at a critical temperature, above which vortices proliferate, reminiscent of the Kosterlitz-Thouless phase transition in the O(2) model V.L. Berezinskii, Destruction of long-range order in one-dimensional and two-dimensional systems having a continuous symmetry group II. Quantum systems, Sov. Phys. JETP 34 (1972) 610. J.M. Kosterlitz and D.J. Thouless, Ordering, metastability and phase transitions in two-dimensional systems, J. Phys. C 6 (1973) 1181 [http://inspirehep.net/search?p=find+J+%22J.Phys.,C6,1181%22]. . Unlike in the O(2) case, there are many different types of vortices, suggesting a possible analogy to the Hagedorn treatment of statistical mechanics of a proliferating number of hadron species. Below the critical temperature the spins cluster around six special points in the target space known as Weierstrass points. The diversity of compact hyperbolic manifolds suggests that our model is only the simplest example of a broad class of statistical mechanical models whose main features can be understood essentially in geometric terms.

The algebra of non-local charges in non-linear sigma models

International Nuclear Information System (INIS)

Abdalla, E.; Abdalla, M.C.B.; Brunelli, J.C.; Zadra, A.

1993-07-01

We obtain the exact Dirac algebra obeyed by the conserved non-local charges in bosonic non-linear sigma models. Part of the computation is specialized for a symmetry group O(N). As it turns out the algebra corresponds to a cubic deformation of the Kac-Moody algebra. The non-linear terms are computed in closed form. In each Dirac bracket we only find highest order terms (as explained in the paper), defining a saturated algebra. We generalize the results for the presence of a Wess-Zumino term. The algebra is very similar to the previous one, containing now a calculable correction of order one unit lower. (author). 22 refs, 5 figs

Supersymmetric sigma models

International Nuclear Information System (INIS)

Bagger, J.A.

1984-09-01

We begin to construct the most general supersymmetric Lagrangians in one, two and four dimensions. We find that the matter couplings have a natural interpretation in the language of the nonlinear sigma model

Supersymmetric sigma models

Energy Technology Data Exchange (ETDEWEB)

Bagger, J.A.

1984-09-01

We begin to construct the most general supersymmetric Lagrangians in one, two and four dimensions. We find that the matter couplings have a natural interpretation in the language of the nonlinear sigma model.

Locally supersymmetric D=3 non-linear sigma models

International Nuclear Information System (INIS)

Wit, B. de; Tollsten, A.K.; Nicolai, H.

1993-01-01

We study non-linear sigma models with N local supersymmetries in three space-time dimensions. For N=1 and 2 the target space of these models is riemannian or Kaehler, respectively. All N>2 theories are associated with Einstein spaces. For N=3 the target space is quaternionic, while for N=4 it generally decomposes, into two separate quaternionic spaces, associated with inequivalent supermultiplets. For N=5, 6, 8 there is a unique (symmetric) space for any given number of supermultiplets. Beyond that there are only theories based on a single supermultiplet for N=9, 10, 12 and 16, associated with coset spaces with the exceptional isometry groups F 4(-20) , E 6(-14) , E 7(-5) and E 8(+8) , respectively. For N=3 and N ≥ 5 the D=2 theories obtained by dimensional reduction are two-loop finite. (orig.)

The algebra of non-local charges in non-linear sigma models

International Nuclear Information System (INIS)

Abdalla, E.; Abdalla, M.C.B.; Brunelli, J.C.; Zadra, A.

1994-01-01

It is derived the complete Dirac algebra satisfied by non-local charges conserved in non-linear sigma models. Some examples of calculation are given for the O(N) symmetry group. The resulting algebra corresponds to a saturated cubic deformation (with only maximum order terms) of the Kac-Moody algebra. The results are generalized for when a Wess-Zumino term be present. In that case the algebra contains a minor order correction (sub-saturation). (author). 1 ref

Spectra of coset sigma models

Energy Technology Data Exchange (ETDEWEB)

Candu, Constantin [Institut fuer Theoretische Physik, Zuerich (Switzerland); Mitev, Vladimir [Humboldt-Universitaet, Berlin (Germany). Inst. fuer Mathematik; Humboldt-Universitaet, Berlin (Germany). Inst. fuer Physik; Schomerus, Volker [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group

2013-08-15

We compute the complete 1-loop spectrum of anomalous dimensions for the bulk fields of non-linear sigma models on symmetric coset (super)spaces G/H, both with and without world-sheet supersymmetry. In addition, we provide two new methods for the construction of partition functions in the infinite radius limit and demonstrate their efficiency in the case of (super)sphere sigma models. Our results apply to a large number of target spaces including superspheres and superprojective spaces such as the N=2 sigma model on CP{sup 3} {sup vertical} {sup stroke} {sup 4}.

Spectra of coset sigma models

International Nuclear Information System (INIS)

Candu, Constantin; Mitev, Vladimir; Humboldt-Universitaet, Berlin; Schomerus, Volker

2013-08-01

We compute the complete 1-loop spectrum of anomalous dimensions for the bulk fields of non-linear sigma models on symmetric coset (super)spaces G/H, both with and without world-sheet supersymmetry. In addition, we provide two new methods for the construction of partition functions in the infinite radius limit and demonstrate their efficiency in the case of (super)sphere sigma models. Our results apply to a large number of target spaces including superspheres and superprojective spaces such as the N=2 sigma model on CP 3 vertical stroke 4 .

Cutoff effects in O(N) nonlinear sigma models

International Nuclear Information System (INIS)

Knechtli, Francesco; Leder, Bjoern; Wolff, Ulli

2005-01-01

In the nonlinear O(N) sigma model at N=3 unexpected cutoff effects have been found before with standard discretizations and lattice spacings. Here the situation is analyzed further employing additional data for the step scaling function of the finite volume mass gap at N=3,4,8 and a large N-study of the leading as well as next-to-leading terms in 1/N. The latter exact results are demonstrated to follow Symanzik's form of the asymptotic cutoff dependence. At the same time, when fuzzed with artificial statistical errors and then fitted like the Monte Carlo results, a picture similar to N=3 emerges. We hence cannot conclude a truly anomalous cutoff dependence but only relatively large cutoff effects, where the logarithmic component is important. Their size shrinks at larger N, but the structure remains similar. The large N results are particularly interesting as we here have exact nonperturbative control over an asymptotically free model both in the continuum limit and on the lattice

Cutoff effects in O(N) nonlinear sigma models

International Nuclear Information System (INIS)

Knechtli, F.; Wolff, U.; Leder, B.

2005-06-01

In the nonlinear O(N) sigma model at N=3 unexpected cutoff effects have been found before with standard discretizations and lattice spacings. Here the situation is analyzed further employing additional data for the step scaling function of the finite volume mass gap at N=3,4,8 and a large N-study of the leading as well as next-to-leading terms in 1/N. The latter exact results are demonstrated to follow Symanzik's form of the asymptotic cutoff dependence. At the same time, when fuzzed with artificial statistical errors and then fitted like the Monte Carlo results, a picture similar to N=3 emerges. We hence cannot conclude a truly anomalous cutoff dependence but only relatively large cutoff effects, where the logarithmic component is important. Their size shrinks at larger N, but the structure remains similar. The large N results are particularly interesting as we here have exact nonperturbative control over an asymptotically free model both in the continuum limit and on the lattice. (orig.)

Classical solutions of non-linear sigma-models and their quantum fluctuations

International Nuclear Information System (INIS)

Din, A.M.

1980-05-01

I study the properties of O(N) and CPsup(n-1) non-linear sigma-models in the two dimensional Euclidean space. All classical solutions of the equations of motion can be characterized and in the CPsup(n-1) model they can be expressed in a simple and explicit way in terms of holomorphic vectors. The topological winding number and the action of the general CPsup(n-1) solution can be evaluated and the latter turns out always to be a integer multiple of 2π. I further discuss the stability of the solutions and the problem of one-loop calculations of quantum fluctuations around classical solutions

Nonlinearities in SC Delta-Sigma A/D Converters

DEFF Research Database (Denmark)

Steensgaard-Madsen, Jesper

1998-01-01

The effects of using nonlinear low-gain opamps in switched-capacitor delta-sigma modulators are analyzed. Using unconventional topologies, the state variables are made essentially uncorrelated with the input signal, hence opamp nonlinearity will cause very little harmonic distortion. Nonlinearity...

(2,0)-Super-Yang-Mills coupled to non-linear {sigma}-model

Energy Technology Data Exchange (ETDEWEB)

Goes-Negrao, M.S.; Penna-Firme, A.B. [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil); Negrao, M.R. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Fisica

1999-07-01

Considering a class of (2,0)-super yang-Mills multiplets that accommodate a pair of independent gauge potentials in connection with a single symmetry group, we present here their coupling to ordinary matter to non-linear {sigma}-models in (2,0)-superspace. The dynamics and the coupling of the gauge potentials are discussed and the interesting feature that comes out is a sort of chirality for one of the gauge potentials are discussed and the interesting feature that comes out is a sort of chirality for one of the gauge potentials once light-cone coordinates are chosen. (author)

Non-perturbative aspects of nonlinear sigma models

Energy Technology Data Exchange (ETDEWEB)

Flore, Raphael

2012-12-07

The aim of this thesis was the study and further development of non-perturbative methods of quantum field theory by means of their application to nonlinear sigma models. While a large part of the physical phenomena of quantum field theory can be successfully predicted by the perturbation theory, some aspects in the region of large coupling strengths are not definitively understood and require suited non-perturbative methods for its analysis. This thesis is concentrated on two approaches, the numerical treatment of field theories on discrete space-time lattices and the functional renormalization group (FRG) as description of the renormalization flux of effective actions. Considerations of the nonlinear O(N) models have shown that for the correct analysis of the critical properties in the framework of the FRG an approach must be chosen, which contained fourth-derivation orders. For this a covariant formalism was developed, which is based on a background-field expansion and the development of a heat kernel. Apart from a destabilizing coupling the results suggest a nontrivial fixed point and by this a non-perturbative renormalizability of these models. The resulting flow diagrams were finally still compared with the results of a numerical analysis of the renormalization flow by means of the Monte-Carlo renormalization group, and hereby qualitative agreement was found. Furthermore an alternative formulation of the FRG in phase-space coordinates was studied and their consistency tested on simple examples. Beyond this an alternative expansion of the effective action in orders of the canonical momenta was applied to the nonlinear O(N) models with the result of a stable non-trivial fixed point, the critical properties of which however show not the expected N-dependence. By means of the FRG finally still the renormalization of topological operators was studied by means of the winding number of the O(3){approx_equal}CP{sup 1} model. By the generalization of the topological

Non-perturbative aspects of nonlinear sigma models

International Nuclear Information System (INIS)

Flore, Raphael

2012-01-01

The aim of this thesis was the study and further development of non-perturbative methods of quantum field theory by means of their application to nonlinear sigma models. While a large part of the physical phenomena of quantum field theory can be successfully predicted by the perturbation theory, some aspects in the region of large coupling strengths are not definitively understood and require suited non-perturbative methods for its analysis. This thesis is concentrated on two approaches, the numerical treatment of field theories on discrete space-time lattices and the functional renormalization group (FRG) as description of the renormalization flux of effective actions. Considerations of the nonlinear O(N) models have shown that for the correct analysis of the critical properties in the framework of the FRG an approach must be chosen, which contained fourth-derivation orders. For this a covariant formalism was developed, which is based on a background-field expansion and the development of a heat kernel. Apart from a destabilizing coupling the results suggest a nontrivial fixed point and by this a non-perturbative renormalizability of these models. The resulting flow diagrams were finally still compared with the results of a numerical analysis of the renormalization flow by means of the Monte-Carlo renormalization group, and hereby qualitative agreement was found. Furthermore an alternative formulation of the FRG in phase-space coordinates was studied and their consistency tested on simple examples. Beyond this an alternative expansion of the effective action in orders of the canonical momenta was applied to the nonlinear O(N) models with the result of a stable non-trivial fixed point, the critical properties of which however show not the expected N-dependence. By means of the FRG finally still the renormalization of topological operators was studied by means of the winding number of the O(3)≅CP 1 model. By the generalization of the topological operator and the

Isomorphism and the #betta#-function of the non-linear sigma model in symmetric spaces

International Nuclear Information System (INIS)

Hikami, S.

1983-01-01

The renormalization group #betta#-function of the non-linear sigma model in symmetric spaces is discussed via the isomorphic relation and the reciprocal relation about a parameter α. The four-loop term is investigated and the symmetric properties of the #betta#-function are studied. The four-loop term in the #betta#-function is shown to be vanishing for the orthogonal Anderson localization problem. (orig.)

The fourth-order non-linear sigma models and asymptotic freedom in four dimensions

International Nuclear Information System (INIS)

Buchbinder, I.L.; Ketov, S.V.

1991-01-01

Starting with the most general Lagrangian of the fourth-order non-linear sigma model in four space-time dimensions, we calculate the one-loop, on-shell ultra-violet-divergent part of the effective action. The formalism is based on the background field method and the generalised Schwinger-De Witt technique. The multiplicatively renormalisable case is investigated in some detail. The renormalisation group equations are obtained, and the conditions for a realisation of asymptotic freedom are considered. (orig.)

Quantum non-local charges and absence of particle production in the two-dimensional non-linear sigma-model

International Nuclear Information System (INIS)

Luescher, M.

1977-12-01

Conserved non-local charges are shown to exist in the quantum non-linear sigma-model by a non-perturbative method. They imply the absence of particle production and the 'factorization equations' for the two particle S-matrix, which can then be calculated explicitly. (Auth.)

Classically integrable boundary conditions for symmetric-space sigma models

International Nuclear Information System (INIS)

MacKay, N.J.; Young, C.A.S.

2004-01-01

We investigate boundary conditions for the non-linear sigma model on the compact symmetric space G/H. The Poisson brackets and the classical local conserved charges necessary for integrability are preserved by boundary conditions which correspond to involutions which commute with the involution defining H. Applied to SO(3)/SO(2), the non-linear sigma model on S 2 , these yield the great circles as boundary submanifolds. Applied to GxG/G, they reproduce known results for the principal chiral model

Apparently noninvariant terms of nonlinear sigma models in lattice perturbation theory

International Nuclear Information System (INIS)

Harada, Koji; Hattori, Nozomu; Kubo, Hirofumi; Yamamoto, Yuki

2009-01-01

Apparently noninvariant terms (ANTs) that appear in loop diagrams for nonlinear sigma models are revisited in lattice perturbation theory. The calculations have been done mostly with dimensional regularization so far. In order to establish that the existence of ANTs is independent of the regularization scheme, and of the potential ambiguities in the definition of the Jacobian of the change of integration variables from group elements to 'pion' fields, we employ lattice regularization, in which everything (including the Jacobian) is well defined. We show explicitly that lattice perturbation theory produces ANTs in the four-point functions of the pion fields at one-loop and the Jacobian does not play an important role in generating ANTs.

Sphalerons of O(3) nonlinear sigma model on a circle

International Nuclear Information System (INIS)

Funakubo, Koichi; Otsuki, Shoichiro; Toyoda, Fumihiko.

1989-09-01

A series of saddle point solutions of O(3) nonlinear sigma model with symmetry breaking term in 1 + 1 dimensions are obtained by imposing boundary condition either periodic or partially antiperiodic (O(3) sphalerons on a circle). Under the periodic boundary condition, classical features of the O(3) sphalerons are similar to scalar sphalerons of φ 4 model on a circle by Manton and Samols. Under the partially antiperiodic boundary condition, the lowest of the O(3) sphalerons coincides in the limit of infinite spatial domain with the O(3) sphaleron by Mottola and Wipf. In particular, zero and negative modes of them are examined in detail. An estimate of transition rate over the lowest O(3) sphaleron at finite temperature is made, and some remarks on simulating the transition on a lattice are given. One to one correspondence between these O(3) sphalerons on a circle and a series of (possible) classical solutions of SU(2) gauge-Higgs model, to which the electroweak sphaleron S and new sphaleron S* belong, is discussed. (author)

Scattering of massless lumps and non-local charges in the two-dimensional classical non-linear sigma-model

International Nuclear Information System (INIS)

Luescher, M.; Pohlmeyer, K.

1977-09-01

Finite energy solutions of the field equations of the non-linear sigma-model are shown to decay asymptotically into massless lumps. By means of a linear eigenvalue problem connected with the field equations we then find an infinite set of dynamical conserved charges. They, however, do not provide sufficient information to decode the complicated scattering of lumps. (orig.) [de

On D-branes from gauged linear sigma models

International Nuclear Information System (INIS)

Govindarajan, S.; Jayaraman, T.; Sarkar, T.

2001-01-01

We study both A-type and B-type D-branes in the gauged linear sigma model by considering worldsheets with boundary. The boundary conditions on the matter and vector multiplet fields are first considered in the large-volume phase/non-linear sigma model limit of the corresponding Calabi-Yau manifold, where we find that we need to add a contact term on the boundary. These considerations enable to us to derive the boundary conditions in the full gauged linear sigma model, including the addition of the appropriate boundary contact terms, such that these boundary conditions have the correct non-linear sigma model limit. Most of the analysis is for the case of Calabi-Yau manifolds with one Kaehler modulus (including those corresponding to hypersurfaces in weighted projective space), though we comment on possible generalisations

Quantization of O(N) non-linear sigma models as the stochastic motion on Ssup(N-1)

International Nuclear Information System (INIS)

Aldazabal, G.; Parga, N.

1983-09-01

We obtain the Langevin equations for the stochastic quantization of the O(N) non-linear sigma model by studying the random (Gaussian) motion on the sphere Ssup(N-1). We prove the equivalence of this procedure with a different one where the random forces are elements of the O(N) algebra. A proof that our approach yields in the equilibrium regime the quantum field theory is also given. (author)

Superspace formulation of new nonlinear sigma models

International Nuclear Information System (INIS)

Gates, S.J. Jr.

1983-07-01

The superspace formulation of two classes of supersymmetric nonlinear σ-models are presented. Two alternative N=1 superspace formulations are given for the d=2 supersymmetric nonlinear σ-models with Killing vector potentials: (a) formulation uses an active central charge and, (b) formulation uses a spurion superfield without inducing a classical breakdown of supersymmetry. The N=2 vector multiplet is used to construct a new class of d=4 nonlinear σ-models which when reduced to d=2 possess N=4 supersymmetry. Implications of these two classes of nonlinear σ-models for N>=4 superfield supergravity are discussed. (author)

Supersymmetric sigma models and the heterotic string

International Nuclear Information System (INIS)

Hull, C.M.; Witten, E.

1989-01-01

The authors define the (1 + 1)-dimensional supersymmetry algebra of type (p, q) to be that generated by p right-handed Majorana-Weyl supercharges and q left-handed ones. They construct the non-linear sigma models with supersymmetry of type (1, 0) and (2, 0) and discuss their geometry and their relevance to compactifications of the heterotic superstring. The sigma-model anomalies can be canceled by a mechanism closely related to that used by Green and Schwarz to cancel gravitational and Yang-Mills anomalies for the superstring

Four dimensional sigma model coupled to the metric tensor field

International Nuclear Information System (INIS)

Ghika, G.; Visinescu, M.

1980-02-01

We discuss the four dimensional nonlinear sigma model with an internal O(n) invariance coupled to the metric tensor field satisfying Einstein equations. We derive a bound on the coupling constant between the sigma field and the metric tensor using the theory of harmonic maps. A special attention is paid to Einstein spaces and some new explicit solutions of the model are constructed. (author)

The geometric background-field method, renormalization and the Wess-Zumino term in non-linear sigma-models

International Nuclear Information System (INIS)

Mukhi, S.

1986-01-01

A simple recursive algorithm is presented which generates the reparametrization-invariant background-field expansion for non-linear sigma-models on manifolds with an arbitrary riemannian metric. The method is also applicable to Wess-Zumino terms and to counterterms. As an example, the general-metric model is expanded to sixth order and compared with previous results. For locally symmetric spaces, we actually obtain a general formula for the nth order term. The method is shown to facilitate the study of models with Wess-Zumino terms. It is demonstrated that, for chiral models, the Wess-Zumino term is unrenormalized to all orders in perturbation theory even when the model is not conformally invariant. (orig.)

Vortices, semi-local vortices in gauged linear sigma model

International Nuclear Information System (INIS)

Kim, Namkwon

1998-11-01

We consider the static (2+1)D gauged linear sigma model. By analyzing the governing system of partial differential equations, we investigate various aspects of the model. We show the existence of energy finite vortices under a partially broken symmetry on R 2 with the necessary condition suggested by Y. Yang. We also introduce generalized semi-local vortices and show the existence of energy finite semi-local vortices under a certain condition. The vacuum manifold for the semi-local vortices turns out to be graded. Besides, with a special choice of a representation, we show that the O(3) sigma model of which target space is nonlinear is a singular limit of the gauged linear sigma model of which target space is linear. (author)

Large-N limit of the gradient flow in the 2D O(N) nonlinear sigma model

International Nuclear Information System (INIS)

Makino, Hiroki; Sugino, Fumihiko; Suzuki, Hiroshi

2015-01-01

The gradient flow equation in the 2D O(N) nonlinear sigma model with lattice regularization is solved in the leading order of the 1/N expansion. By using this solution, we analytically compute the thermal expectation value of a lattice energy–momentum tensor defined through the gradient flow. The expectation value reproduces thermodynamic quantities obtained by the standard large-N method. This analysis confirms that the above lattice energy–momentum tensor restores the correct normalization automatically in the continuum limit, in a system with a non-perturbative mass gap

On a discrete version of the CP 1 sigma model and surfaces immersed in R3

International Nuclear Information System (INIS)

Grundland, A M; Levi, D; Martina, L

2003-01-01

We present a discretization of the CP 1 sigma model. We show that the discrete CP 1 sigma model is described by a nonlinear partial second-order difference equation with rational nonlinearity. To derive discrete surfaces immersed in three-dimensional Euclidean space a 'complex' lattice is introduced. The so-obtained surfaces are characterized in terms of the quadrilateral cross-ratio of four surface points. In this way we prove that all surfaces associated with the discrete CP 1 sigma model are of constant mean curvature. An explicit example of such discrete surfaces is constructed

Relation between nonlinear models and gauge ambiguities

International Nuclear Information System (INIS)

Balachandran, A.P.; Ramachandran, R.; Rupertsberger, H.; Skagerstam, B.S.

1980-01-01

We show that the solutions of a class of nonlinear models also generate gauge ambiguities in the vacuum sector of Yang-Mills theories. Our results extend known connections between gauge ambiguities and certain nonlinear sigma-models, and clarify the underlying group theory. For many nonlinear models, we also give a simple, intrinsic parametrization of physical fields (which have values in a homogeneous space of a group). (orig.)

The SU(2 vertical stroke 3) spin chain sigma model

International Nuclear Information System (INIS)

Hernandez, R.; Lopez, E.

2005-01-01

The one-loop planar dilatation operator of N = 4 supersymmetric Yang-Mills is isomorphic to the hamiltonian of an integrable PSU(2,2 vertical stroke 4) spin chain. We construct the non-linear sigma model describing the continuum limit of the SU(2 vertical stroke 3) subsector of the N = 4 chain. We explicitly identify the spin chain sigma model with the one for a superstring moving in AdS 5 x S 5 with large angular momentum along the five-sphere. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

Cohomological reduction of sigma models

Energy Technology Data Exchange (ETDEWEB)

Candu, Constantin; Mitev, Vladimir; Schomerus, Volker [DESY, Hamburg (Germany). Theory Group; Creutzig, Thomas [North Carolina Univ., Chapel Hill, NC (United States). Dept. of Physics and Astronomy

2010-01-15

This article studies some features of quantum field theories with internal supersymmetry, focusing mainly on 2-dimensional non-linear sigma models which take values in a coset superspace. It is discussed how BRST operators from the target space super- symmetry algebra can be used to identify subsectors which are often simpler than the original model and may allow for an explicit computation of correlation functions. After an extensive discussion of the general reduction scheme, we present a number of interesting examples, including symmetric superspaces G/G{sup Z{sub 2}} and coset superspaces of the form G/G{sup Z{sub 4}}. (orig.)

General classical solutions of the complex Grassmannian and CP sub(N-1) sigma models

International Nuclear Information System (INIS)

Sasaki, Ryu.

1983-05-01

General classical solutions are constructed for the complex Grassmannian non-linear sigma models in two euclidean dimensions in terms of holomorphic functions. The Grassmannian sigma models are a simple generalization of the well known CP sup(N-1) model in two dimensions and they share various interesting properties; existence of (anti-) instantons, an infinite number of conserved quantities and complete integrability. (author)

Classical Exchange Algebra of the Nonlinear Sigma Model on a Supercoset Target with Z2n Grading

International Nuclear Information System (INIS)

Ke San-Min; Li Xin-Ying; Wang Chun; Yue Rui-Hong

2011-01-01

The classical exchange algebra satisfied by the monodromy matrix of the nonlinear sigma model on a supercoset target with Z 2n grading is derived using a first-order Hamiltonian formulation and by adding to the Lax connection terms proportional to constraints. This enables us to show that the conserved charges of the theory are in involution. When n = 2, our results coincide with the results given by Magro for the pure spinor description of AdS 5 × S 5 string theory (when the ghost terms are omitted). (the physics of elementary particles and fields)

Background field method in gauge theories and on linear sigma models

International Nuclear Information System (INIS)

van de Ven, A.E.M.

1986-01-01

This dissertation constitutes a study of the ultraviolet behavior of gauge theories and two-dimensional nonlinear sigma-models by means of the background field method. After a general introduction in chapter 1, chapter 2 presents algorithms which generate the divergent terms in the effective action at one-loop for arbitrary quantum field theories in flat spacetime of dimension d ≤ 11. It is demonstrated that global N = 1 supersymmetric Yang-Mills theory in six dimensions in one-loop UV-finite. Chapter 3 presents an algorithm which produces the divergent terms in the effective action at two-loops for renormalizable quantum field theories in a curved four-dimensional background spacetime. Chapter 4 presents a study of the two-loop UV-behavior of two-dimensional bosonic and supersymmetric non-linear sigma-models which include a Wess-Zumino-Witten term. It is found that, to this order, supersymmetric models on quasi-Ricci flat spaces are UV-finite and the β-functions for the bosonic model depend only on torsionful curvatures. Chapter 5 summarizes a superspace calculation of the four-loop β-function for two-dimensional N = 1 and N = 2 supersymmetric non-linear sigma-models. It is found that besides the one-loop contribution which vanishes on Ricci-flat spaces, the β-function receives four-loop contributions which do not vanish in the Ricci-flat case. Implications for superstrings are discussed. Chapters 6 and 7 treat the details of these calculations

Topological massive sigma models

International Nuclear Information System (INIS)

Lambert, N.D.

1995-01-01

In this paper we construct topological sigma models which include a potential and are related to twisted massive supersymmetric sigma models. Contrary to a previous construction these models have no central charge and do not require the manifold to admit a Killing vector. We use the topological massive sigma model constructed here to simplify the calculation of the observables. Lastly it is noted that this model can be viewed as interpolating between topological massless sigma models and topological Landau-Ginzburg models. ((orig.))

Anomalies of hidden local chiral symmetries in sigma-models and extended supergravities

International Nuclear Information System (INIS)

Vecchia, P. di; Ferrara, S.; Girardello, L.

1985-01-01

Non-linear sigma-models with hidden gauge symmetries are anomalous, at the quantum level, when coupled to chiral fermions in not anomaly free representations of the hidden chiral symmetry. These considerations generally apply to supersymmetric kaehlerian sigma-models on coset spaces with hidden chiral symmetries as well as to extended supergravities in four dimensions with local SU(N) symmetry. The presence of the anomaly implies that the scenario of dynamical generation of gauge vector bosons has to be reconsidered in these theories. (orig.)

A new class of superconformal sigma models with the Wess-Zumino action

International Nuclear Information System (INIS)

Ivanov, E.A.; Krivonos, S.O.

1987-01-01

Nonlinear sigma models are constructed for infinite-dimensional N-extended D=2 superconformal symmetries (of the type (N,N)). These are classically integrable and naturally incorporate conformally invariant bosonic Wess-Zumino sigma model defined on the supersymmetry automorphism group SO - (N)xSO + (N). A finite set of basic Nambu-Goldstone superfields is singled out by imposing infinitely many covariant constraints on the relevant Cartan 1-forms. The resulting superfield equations of motion and off-shell irreducibility conditions have a universal for any N. The N3 and N=4 models are examined in detail

On the 1/N expansion of the two-dimensional non-linear sigma-model: The vestige of chiral geometry

International Nuclear Information System (INIS)

Flume, R.

1978-11-01

We investigate the functioning of the O(N)-symmetry of the non-linear two-dimensional sigma-model using the 1/N expansion. The mechanism of O(N)-symmetry restoration is made explicit. We show that the O(N) invariant operators are in a one to one correspondance with the (c-number) invariants of the classical model. We observe a phenomenon, important in the context of the symmetry restoration, which might be called 'transmutation of anomalies'. That is, an anomaly of the equations of motion appearing before a summation of graphs contributing to the leading order of 1/N as a short distance effect becomes, after the summation, a long-distance effect. (orig.) [de

Brane solutions of a spherical sigma model in six dimensions

International Nuclear Information System (INIS)

Lee, Hyun Min; Papazoglou, Antonios

2005-01-01

We explore solutions of six-dimensional gravity coupled to a non-linear sigma model, in the presence of codimension-two branes. We investigate the compactifications induced by a spherical scalar manifold and analyze the conditions under which they are of finite volume and singularity free. We discuss the issue of single-valuedness of the scalar fields and provide some special embedding of the scalar manifold to the internal space which solves this problem. These brane solutions furnish some self-tuning features, however they do not provide a satisfactory explanation of the vanishing of the effective four-dimensional cosmological constant. We discuss the properties of this model in relation with the self-tuning example based on a hyperbolic sigma model

One loop beta functions and fixed points in higher derivative sigma models

International Nuclear Information System (INIS)

Percacci, Roberto; Zanusso, Omar

2010-01-01

We calculate the one loop beta functions of nonlinear sigma models in four dimensions containing general two- and four-derivative terms. In the O(N) model there are four such terms and nontrivial fixed points exist for all N≥4. In the chiral SU(N) models there are in general six couplings, but only five for N=3 and four for N=2; we find fixed points only for N=2, 3. In the approximation considered, the four-derivative couplings are asymptotically free but the coupling in the two-derivative term has a nonzero limit. These results support the hypothesis that certain sigma models may be asymptotically safe.

Hadron properties in chiral sigma model

International Nuclear Information System (INIS)

Shen Hong

2005-01-01

The modification of hadron masses in nuclear medium is studied by using the chiral sigma model, which is extended to generate the omega meson mass by the sigma condensation in the vacuum in the same way as the nucleon mass. The chiral sigma model provides proper equilibrium properties of nuclear matter. It is shown that the effective masses of both nucleons and omega mesons decrease in nuclear medium, while the effective mass of sigma mesons increases oat finite density in the chiral sigma model. The results obtained in the chiral sigma model are compared with those obtained in the Walecka model, which includes sigma and omega mesons in a non-chiral fashion. (author)

Two species of vortices in massive gauged non-linear sigma models

International Nuclear Information System (INIS)

Alonso-Izquierdo, A.; Fuertes, W. García; Guilarte, J. Mateos

2015-01-01

Non-linear sigma models with scalar fields taking values on ℂℙ"n complex manifolds are addressed. In the simplest n=1 case, where the target manifold is the S"2 sphere, we describe the scalar fields by means of stereographic maps. In this case when the U(1) symmetry is gauged and Maxwell and mass terms are allowed, the model accommodates stable self-dual vortices of two kinds with different energies per unit length and where the Higgs field winds at the cores around the two opposite poles of the sphere. Allowing for dielectric functions in the magnetic field, similar and richer self-dual vortices of different species in the south and north charts can be found by slightly modifying the potential. Two different situations are envisaged: either the vacuum orbit lies on a parallel in the sphere, or one pole and the same parallel form the vacuum orbit. Besides the self-dual vortices of two species, there exist BPS domain walls in the second case. Replacing the Maxwell contribution of the gauge field to the action by the second Chern-Simons secondary class, only possible in (2+1)-dimensional Minkowski space-time, new BPS topological defects of two species appear. Namely, both BPS vortices and domain ribbons in the south and the north charts exist because the vacuum orbit consits of the two poles and one parallel. Formulation of the gauged ℂℙ"2 model in a reference chart shows a self-dual structure such that BPS semi-local vortices exist. The transition functions to the second or third charts break the U(1)×SU(2) semi-local symmetry, but there is still room for standard self-dual vortices of the second species. The same structures encompassing N complex scalar fields are easily generalized to gauged ℂℙ"N models.

Two species of vortices in massive gauged non-linear sigma models

Energy Technology Data Exchange (ETDEWEB)

Alonso-Izquierdo, A. [Departamento de Matemática Aplicada, Universidad de Salamanca,Facultad de Ciencias Agrarias y Ambientales, Av. Filiberto Villalobos 119, E-37008 Salamanca (Spain); Fuertes, W. García [Departamento de Física, Universidad de Oviedo, Facultad de Ciencias, Calle Calvo Sotelo s/n, E-33007 Oviedo (Spain); Guilarte, J. Mateos [Departamento de Física Fundamental, Universidad de Salamanca, Facultad de Ciencias, Plaza de la Merced, E-37008 Salamanca (Spain)

2015-02-23

Non-linear sigma models with scalar fields taking values on ℂℙ{sup n} complex manifolds are addressed. In the simplest n=1 case, where the target manifold is the S{sup 2} sphere, we describe the scalar fields by means of stereographic maps. In this case when the U(1) symmetry is gauged and Maxwell and mass terms are allowed, the model accommodates stable self-dual vortices of two kinds with different energies per unit length and where the Higgs field winds at the cores around the two opposite poles of the sphere. Allowing for dielectric functions in the magnetic field, similar and richer self-dual vortices of different species in the south and north charts can be found by slightly modifying the potential. Two different situations are envisaged: either the vacuum orbit lies on a parallel in the sphere, or one pole and the same parallel form the vacuum orbit. Besides the self-dual vortices of two species, there exist BPS domain walls in the second case. Replacing the Maxwell contribution of the gauge field to the action by the second Chern-Simons secondary class, only possible in (2+1)-dimensional Minkowski space-time, new BPS topological defects of two species appear. Namely, both BPS vortices and domain ribbons in the south and the north charts exist because the vacuum orbit consits of the two poles and one parallel. Formulation of the gauged ℂℙ{sup 2} model in a reference chart shows a self-dual structure such that BPS semi-local vortices exist. The transition functions to the second or third charts break the U(1)×SU(2) semi-local symmetry, but there is still room for standard self-dual vortices of the second species. The same structures encompassing N complex scalar fields are easily generalized to gauged ℂℙ{sup N} models.

Spectra of conformal sigma models

International Nuclear Information System (INIS)

Tlapak, Vaclav

2015-04-01

In this thesis the spectra of conformal sigma models defined on (generalized) symmetric spaces are analysed. The spaces where sigma models are conformal without the addition of a Wess-Zumino term are supermanifolds, in other words spaces that include fermionic directions. After a brief review of the general construction of vertex operators and the background field expansion, we compute the diagonal terms of the one-loop anomalous dimensions of sigma models on semi-symmetric spaces. We find that the results are formally identical to the symmetric case. However, unlike for sigma models on symmetric spaces, off diagonal terms that lead to operator mixing are also present. These are not computed here. We then present a detailed analysis of the one-loop spectrum of the supersphere S 3 vertical stroke 2 sigma model as one of the simplest examples. The analysis illustrates the power and simplicity of the construction. We use this data to revisit a duality with the OSP(4 vertical stroke 2) Gross-Neveu model that was proposed by Candu and Saleur. With the help of a recent all-loop result for the anomalous dimension of (1)/(2)BPS operators of Gross-Neveu models, we are able to recover the entire zero-mode spectrum of the supersphere model. We also argue that the sigma model constraints and its equations of motion are implemented correctly in the Gross-Neveu model, including the one-loop data. The duality is further supported by a new all-loop result for the anomalous dimension of the ground states of the sigma model. However, higher-gradient operators cannot be completely recovered. It is possible that this discrepancy is related to a known instability of the sigma model. The instability of sigma models is due to symmetry preserving high-gradient operators that become relevant at arbitrarily small values of the coupling. This feature has been observed long ago in one-loop calculations of the O(N)-vector model and soon been realized to be a generic property of sigma models

The algebra of the energy-momentum tensor and the Noether currents in classical non-linear sigma models

International Nuclear Information System (INIS)

Forger, M.; Mannheim Univ.; Laartz, J.; Schaeper, U.

1994-01-01

The recently derived current algrbra of classical non-linear sigma models on arbitrary Riemannian manifolds is extended to include the energy-momentum tensor. It is found that in two dimensions the energy-momentum tensor θ μv , the Noether current j μ associated with the global symmetry of the theory and the composite field j appearing as the coefficient of the Schwinger term in the current algebra, together with the derivatives of j μ and j, generte a closed algebra. The subalgebra generated by the light-cone components of the energy-momentum tensor consists of two commuting copies of the Virasoro algebra, with central charge c=0, reflecting the classical conformal invariance of the theory, but the current algebra part and the semidirect product structure are quite different from the usual Kac-Moody/Sugawara type contruction. (orig.)

A self-adaption compensation control for hysteresis nonlinearity in piezo-actuated stages based on Pi-sigma fuzzy neural network

Science.gov (United States)

Xu, Rui; Zhou, Miaolei

2018-04-01

Piezo-actuated stages are widely applied in the high-precision positioning field nowadays. However, the inherent hysteresis nonlinearity in piezo-actuated stages greatly deteriorates the positioning accuracy of piezo-actuated stages. This paper first utilizes a nonlinear autoregressive moving average with exogenous inputs (NARMAX) model based on the Pi-sigma fuzzy neural network (PSFNN) to construct an online rate-dependent hysteresis model for describing the hysteresis nonlinearity in piezo-actuated stages. In order to improve the convergence rate of PSFNN and modeling precision, we adopt the gradient descent algorithm featuring three different learning factors to update the model parameters. The convergence of the NARMAX model based on the PSFNN is analyzed effectively. To ensure that the parameters can converge to the true values, the persistent excitation condition is considered. Then, a self-adaption compensation controller is designed for eliminating the hysteresis nonlinearity in piezo-actuated stages. A merit of the proposed controller is that it can directly eliminate the complex hysteresis nonlinearity in piezo-actuated stages without any inverse dynamic models. To demonstrate the effectiveness of the proposed model and control methods, a set of comparative experiments are performed on piezo-actuated stages. Experimental results show that the proposed modeling and control methods have excellent performance.

A perturbative approach to mass-generation - the non-linear sigma model

International Nuclear Information System (INIS)

Davis, A.C.; Nahm, W.

1985-01-01

A calculational scheme is presented to include non-perturbative effects into the perturbation expansion. As an example we use the O(N + 1) sigma model. The scheme uses a natural parametrisation such that the lagrangian can be written in a form normal-ordered with respect to the O(N + 1) symmetric vacuum plus vacuum expectation values, the latter calculated by symmetry alone. Including such expectation values automatically leads to the inclusion of a mass-gap in the perturbation series. (orig.)

Integrability of a family of quantum field theories related to sigma models

Energy Technology Data Exchange (ETDEWEB)

Ridout, David [Australian National Univ., Canberra, ACT (Australia). Dept. of Theoretical Physics; DESY, Hamburg (Germany). Theory Group; Teschner, Joerg [DESY, Hamburg (Germany). Theory Group

2011-03-15

A method is introduced for constructing lattice discretizations of large classes of integrable quantum field theories. The method proceeds in two steps: The quantum algebraic structure underlying the integrability of the model is determined from the algebra of the interaction terms in the light-cone representation. The representation theory of the relevant quantum algebra is then used to construct the basic ingredients of the quantum inverse scattering method, the lattice Lax matrices and R-matrices. This method is illustrated with four examples: The Sinh-Gordon model, the affine sl(3) Toda model, a model called the fermionic sl(2 vertical stroke 1) Toda theory, and the N=2 supersymmetric Sine-Gordon model. These models are all related to sigma models in various ways. The N=2 supersymmetric Sine-Gordon model, in particular, describes the Pohlmeyer reduction of string theory on AdS{sub 2} x S{sup 2}, and is dual to a supersymmetric non-linear sigma model with a sausage-shaped target space. (orig.)

S-matrix regularities of two-dimensional sigma-models of Stiefel manifolds

International Nuclear Information System (INIS)

Flume-Gorczyca, B.

1980-01-01

The S-matrices of the two-dimensional nonlinear O(n + m)/O(n) and O(n + m)/O(n) x O(m) sigma-models corresponding to Stiefel and Grassmann manifolds, respectively, are compared in leading order in 1/n. It is shown, that after averaging over O(m) labels of the incoming and outgoing particles, the S-matrices of both models become identical. This result explains why commonly expected regularities of the Grassmann models, in particular absence of particle production, are found, modulo an O(m) average, also in Stiefel models. (orig.)

Marginal deformations of heterotic G 2 sigma models

Science.gov (United States)

Fiset, Marc-Antoine; Quigley, Callum; Svanes, Eirik Eik

2018-02-01

Recently, the infinitesimal moduli space of heterotic G 2 compactifications was described in supergravity and related to the cohomology of a target space differential. In this paper we identify the marginal deformations of the corresponding heterotic nonlinear sigma model with cohomology classes of a worldsheet BRST operator. This BRST operator is nilpotent if and only if the target space geometry satisfies the heterotic supersymmetry conditions. We relate this to the supergravity approach by showing that the corresponding cohomologies are indeed isomorphic. We work at tree-level in α' perturbation theory and study general geometries, in particular with non-vanishing torsion.

Hamiltonian structures of some non-linear evolution equations

International Nuclear Information System (INIS)

Tu, G.Z.

1983-06-01

The Hamiltonian structure of the O(2,1) non-linear sigma model, generalized AKNS equations, are discussed. By reducing the O(2,1) non-linear sigma model to its Hamiltonian form some new conservation laws are derived. A new hierarchy of non-linear evolution equations is proposed and shown to be generalized Hamiltonian equations with an infinite number of conservation laws. (author)

The low-energy constants of the extended linear sigma model

Energy Technology Data Exchange (ETDEWEB)

Divotgey, Florian; Giacosa, Francesco; Kovacs, Peter; Rischke, Dirk H. [Institut fuer Theoretische Physik, Goethe-Universitaet Frankfurt am Main (Germany)

2016-07-01

The low-energy dynamics of Quantum Chromodynamics (QCD) is fully determined by the interactions of the (pseudo-) Nambu-Goldstone bosons of spontaneous chiral symmetry breaking, i.e., for two quark flavors, the pions. Pion dynamics is described by the low-energy effective theory of QCD, chiral perturbation theory (ChPT), which is based on the nonlinear realization of chiral symmetry. An alternative description is provided by the Linear Sigma Model, where chiral symmetry is linearly realized. An extended version of this model, the so-called extended Linear Sigma Model (eLSM) was recently developed which incorporates all J{sup P}=0{sup ±}, 1{sup ±} anti qq mesons up to 2 GeV in mass. A fit of the coupling constants of this model to experimentally measured masses and decay widths has a surprisingly good quality. In this talk, it is demonstrated that the low-energy limit of the eLSM, obtained by integrating out all fields which are heavier than the pions, assumes the same form as ChPT. Moreover, the low-energy constants (LECs) of the eLSM agree with those of ChPT.

Lattice sigma models with exact supersymmetry

International Nuclear Information System (INIS)

Simon Catterall; Sofiane Ghadab

2004-01-01

We show how to construct lattice sigma models in one, two and four dimensions which exhibit an exact fermionic symmetry. These models are discretized and twisted versions of conventional supersymmetric sigma models with N=2 supersymmetry. The fermionic symmetry corresponds to a scalar BRST charge built from the original supercharges. The lattice theories possess local actions and exhibit no fermion doubling. In the two and four dimensional theories we show that these lattice theories are invariant under additional discrete symmetries. We argue that the presence of these exact symmetries ensures that no fine tuning is required to achieve N=2 supersymmetry in the continuum limit. As a concrete example we show preliminary numerical results from a simulation of the O(3) supersymmetric sigma model in two dimensions. (author)

Six Sigma Driven Enterprise Model Transformation

Directory of Open Access Journals (Sweden)

Raymond Vella

2009-10-01

Full Text Available Enterprise architecture methods provide a structured system to understand enterprise activities. However, existing enterprise modelling methodologies take static views of the enterprise and do not naturally lead to a path of improvement during enterprise model transformation. This paper discusses the need for a methodology to facilitate changes for improvement in an enterprise. The six sigma methodology is proposed as the tool to facilitate progressive and continual Enterprise Model Transformation to allow businesses to adapt to meet increased customer expectation and global competition. An alignment of six sigma with phases of GERAM life cycle is described with inclusion of Critical-To-Satisfaction (CTS requirements. The synergies of combining the two methodologies are presented in an effort to provide a more culturally embedded framework for Enterprise Model Transformation that builds on the success of six sigma.

Nonlinear integral equations for the sausage model

Science.gov (United States)

Ahn, Changrim; Balog, Janos; Ravanini, Francesco

2017-08-01

The sausage model, first proposed by Fateev, Onofri, and Zamolodchikov, is a deformation of the O(3) sigma model preserving integrability. The target space is deformed from the sphere to ‘sausage’ shape by a deformation parameter ν. This model is defined by a factorizable S-matrix which is obtained by deforming that of the O(3) sigma model by a parameter λ. Clues for the deformed sigma model are provided by various UV and IR information through the thermodynamic Bethe ansatz (TBA) analysis based on the S-matrix. Application of TBA to the sausage model is, however, limited to the case of 1/λ integer where the coupled integral equations can be truncated to a finite number. In this paper, we propose a finite set of nonlinear integral equations (NLIEs), which are applicable to generic value of λ. Our derivation is based on T-Q relations extracted from the truncated TBA equations. For a consistency check, we compute next-leading order corrections of the vacuum energy and extract the S-matrix information in the IR limit. We also solved the NLIE both analytically and numerically in the UV limit to get the effective central charge and compared with that of the zero-mode dynamics to obtain exact relation between ν and λ. Dedicated to the memory of Petr Petrovich Kulish.

Some examples of instantons in sigma models

International Nuclear Information System (INIS)

Kogan, Ya.I.; Markushevich, D.G.; Morozov, A.Yu.; Ol'shanetskii, M.A.; Perelomov, A.M.; Roslyi, A.A.

1989-01-01

The paper considers (supersymmetric) sigma models in which the fields are defined on a Riemann surface of genus p and take values on a Kaehlerian manifold. Some mathematical methods for finding instantons and their zero modes in such sigma models are explained. Only holomorphic instantons are considered

On the algebraic structure of self-dual gauge fields and sigma models

International Nuclear Information System (INIS)

Bais, F.A.; Sasaki, R.

1983-01-01

An extensive and detailed analysis of self-dual gauge fields, in particular with axial symmetry, is presented, culminating in a purely algebraic procedure to generate solutions. The method which is particularly suited for the construction of multimonopole solutions for a theory with arbitrary G, is also applicable to a wide class of non-linear sigma models. The relevant symmetries as well as the associated linear problems which underly the exact solubility of the problem, are constructed and discussed in detail. (orig.)

Sigma-2 receptor ligands QSAR model dataset

Directory of Open Access Journals (Sweden)

Antonio Rescifina

2017-08-01

Full Text Available The data have been obtained from the Sigma-2 Receptor Selective Ligands Database (S2RSLDB and refined according to the QSAR requirements. These data provide information about a set of 548 Sigma-2 (σ2 receptor ligands selective over Sigma-1 (σ1 receptor. The development of the QSAR model has been undertaken with the use of CORAL software using SMILES, molecular graphs and hybrid descriptors (SMILES and graph together. Data here reported include the regression for σ2 receptor pKi QSAR models. The QSAR model was also employed to predict the σ2 receptor pKi values of the FDA approved drugs that are herewith included.

A construction of observables for AKSZ sigma models

OpenAIRE

Mnev, Pavel

2012-01-01

A construction of gauge-invariant observables is suggested for a class of topological field theories, the AKSZ sigma-models. The observables are associated to extensions of the target Q-manifold of the sigma model to a Q-bundle over it with additional Hamiltonian structure in fibers.

Walls of massive K\\"ahler sigma models on SO(2N)/U(N) and Sp(N)/U(N)

OpenAIRE

Arai, Masato; Shin, Sunyoung

2011-01-01

We study the Bogomol'nyi-Prasad-Sommerfield wall solutions in massive K\\"ahler nonlinear sigma models on SO(2N)/U(N) and Sp(N)/U(N) in three-dimensional spacetime. We show that SO(2N)/U(N) and Sp(N)/U(N) models have 2^{N-1} and 2^N discrete vacua, respectively. We explicitly construct the exact BPS multiwall solutions for N\\le 3.

sigma model approach to the heterotic string theory

International Nuclear Information System (INIS)

Sen, A.

1985-09-01

Relation between the equations of motion for the massless fields in the heterotic string theory, and the conformal invariance of the sigma model describing the propagation of the heterotic string in arbitrary background massless fields is discussed. It is emphasized that this sigma model contains complete information about the string theory. Finally, we discuss the extension of the Hull-Witten proof of local gauge and Lorentz invariance of the sigma-model to higher order in α', and the modification of the transformation laws of the antisymmetric tensor field under these symmetries. Presence of anomaly in the naive N = 1/2 supersymmetry transformation is also pointed out in this context. 12 refs

Nonlinear self-duality and supergravity

International Nuclear Information System (INIS)

Kuzenko, Sergei M.; McCarthy, Shane A.

2003-01-01

The concept of self-dual supersymmetric nonlinear electrodynamics is generalized to a curved superspace of N=1 supergravity, for both the old minimal and the new minimal versions of N=1 supergravity. We derive the self-duality equation, which has to be satisfied by the action functional of any U(1) duality invariant model of a massless vector multiplet, and construct a family of self-dual nonlinear models. This family includes a curved superspace extension of the N=1 super Born-Infeld action. The supercurrent and supertrace in such models are proved to be duality invariant. The most interesting and unexpected result is that the requirement of nonlinear self-duality yields nontrivial couplings of the vector multiplet to Kaehler sigma models. We explicitly derive the couplings to general Kaehler sigma models in the case when the matter chiral multiplets are inert under the duality rotations, and more specifically to the dilaton-axion chiral multiplet when the group of duality rotations is enhanced to SL(2,R). (author)

Complex {PT}-symmetric extensions of the nonlinear ultra-short light pulse model

Science.gov (United States)

Yan, Zhenya

2012-11-01

The short pulse equation u_{xt}=u+\\frac{1}{2}(u^2u_x)_x is PT symmetric, which arises in nonlinear optics for the ultra-short pulse case. We present a family of new complex PT-symmetric extensions of the short pulse equation, i[(iu_x)^{\\sigma }]_t=au+bu^m+ic[u^n(iu_x)^{\\epsilon }]_x \\,\\, (\\sigma ,\\, \\epsilon ,\\,a,\\,b,\\,c,\\,m,\\,n \\in {R}), based on the complex PT-symmetric extension principle. Some properties of these equations with some chosen parameters are studied including the Hamiltonian structures and exact solutions such as solitary wave solutions, doubly periodic wave solutions and compacton solutions. Our results may be useful to understand complex PT-symmetric nonlinear physical models. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical devoted to ‘Quantum physics with non-Hermitian operators’.

On the zero mass limit of the non linear sigma model in four dimensions

International Nuclear Information System (INIS)

Gomes, M.; Koeberle, R.

The existence of the zero mass limit for the non-linear sigma-model in four dimensions is shown to all orders in renormalized perturbation theory. The main ingredient in the proof is the imposition of many current axial vector Ward identities and the tool used is Lowenstein's momentum-space subtraction procedure. Instead of introducing anisotropic symmetry breaking mass terms, which do not vanish in the symmetry limit, it is necessary to allow for 'soft' anisotropic derivative coupling in order to obtain the correct Ward indentities [pt

Doubly graded sigma model with torsion

International Nuclear Information System (INIS)

Kowalski-Glikman, J.

1986-08-01

Using the Hull-Witten construction we show how to introduce torsion to the doubly graded sigma model. This construction enables us to find a link between this model and the ten-dimensional supergravity theory in superspace. (Auth.)

Introduction to sigma model anomalies

International Nuclear Information System (INIS)

Nelson, P.

1985-01-01

This paper presents results dealing with the specific case in which a sigma model with fermions arises as a result of dynamical symmetry breakdown from some group G to a subgroup H. H may contain chiral symmetries protecting some fermions in a representation ρ H of H. In this case it may be impossible to quantize the remaining fermions in a way which reproduces the anomalous Ward identities of any underlying strongly-interacting gauge theory. The author concludes that this pattern of symmetry breakdown will not be realized in any such theory. The criterion in this case is local in character, since roughly speaking once the sigma model in question behaves for field configurations close to the vacuum base point in the internal mainfold is known, symmetry can be used to find how it behaves everywhere else

Squashed Toric Sigma Models and Mock Modular Forms

Science.gov (United States)

Gupta, Rajesh Kumar; Murthy, Sameer

2018-05-01

We study a class of two-dimensional N}=(2,2)} sigma models called squashed toric sigma models, using their Gauged Linear Sigma Models (GLSM) description. These models are obtained by gauging the global {U(1)} symmetries of toric GLSMs and introducing a set of corresponding compensator superfields. The geometry of the resulting vacuum manifold is a deformation of the corresponding toric manifold in which the torus fibration maintains a constant size in the interior of the manifold, thus producing a neck-like region. We compute the elliptic genus of these models, using localization, in the case when the unsquashed vacuum manifolds obey the Calabi-Yau condition. The elliptic genera have a non-holomorphic dependence on the modular parameter {τ} coming from the continuum produced by the neck. In the simplest case corresponding to squashed {C / Z_{2 the elliptic genus is a mixed mock Jacobi form which coincides with the elliptic genus of the {N=(2,2)} {SL(2,R) / U(1)} cigar coset.

Quasicomplex N=2, d=1 Supersymmetric Sigma Models

Directory of Open Access Journals (Sweden)

Evgeny A. Ivanov

2013-11-01

Full Text Available We derive and discuss a new type of N=2 supersymmetric quantum mechanical sigma models which appear when the superfield action of the (1,2,1 multiplets is modified by adding an imaginary antisymmetric tensor to the target space metric, thus completing the latter to a non-symmetric Hermitian metric. These models are not equivalent to the standard de Rham sigma models, but are related to them through a certain special similarity transformation of the supercharges. On the other hand, they can be obtained by a Hamiltonian reduction from the complex supersymmetric N=2 sigma models built on the multiplets (2,2,0 and describing the Dolbeault complex on the manifolds with proper isometries. We study in detail the extremal two-dimensional case, when the target space metric is defined solely by the antisymmetric tensor, and show that the corresponding quantum systems reveal a hidden N=4 supersymmetry.

Landau-Lifshitz sigma-models, fermions and the AdS/CFT correspondence

OpenAIRE

Stefanski Jr, B.

2007-01-01

We define Landau-Lifshitz sigma models on general coset space $G/H$, with $H$ a maximal stability sub-group of $G$. These are non-relativistic models that have $G$-valued N\\"other charges, local $H$ invariance and are classically integrable. Using this definition, we construct the $PSU(2,2|4)/PS(U(2|2)^2)$ Landau-Lifshitz sigma-model. This sigma model describes the thermodynamic limit of the spin-chain Hamiltonian obtained from the complete one-loop dilatation operator of the N=4 super Yang-M...

Soliton surfaces associated with sigma models: differential and algebraic aspects

International Nuclear Information System (INIS)

Goldstein, P P; Grundland, A M; Post, S

2012-01-01

In this paper, we consider both differential and algebraic properties of surfaces associated with sigma models. It is shown that surfaces defined by the generalized Weierstrass formula for immersion for solutions of the CP N-1 sigma model with finite action, defined in the Riemann sphere, are themselves solutions of the Euler–Lagrange equations for sigma models. On the other hand, we show that the Euler–Lagrange equations for surfaces immersed in the Lie algebra su(N), with conformal coordinates, that are extremals of the area functional, subject to a fixed polynomial identity, are exactly the Euler–Lagrange equations for sigma models. In addition to these differential constraints, the algebraic constraints, in the form of eigenvalues of the immersion functions, are systematically treated. The spectrum of the immersion functions, for different dimensions of the model, as well as its symmetry properties and its transformation under the action of the ladder operators are discussed. Another approach to the dynamics is given, i.e. description in terms of the unitary matrix which diagonalizes both the immersion functions and the projectors constituting the model. (paper)

Analysis of CPN-1 sigma models via projective structures

International Nuclear Information System (INIS)

Post, S; Grundland, A M

2012-01-01

This paper represents a study of projector solutions to the Euclidean CP N-1 sigma model in two dimensions and their associated surfaces immersed in the su(N) Lie algebra. Any solution for the CP N-1 sigma model defined on the extended complex plane with finite action can be written as a raising operator acting on a holomorphic one. Here the proof is formulated in terms rank-1 projectors so it is explicitly gauge invariant. We apply these results to the analysis of surfaces associated with the CP N-1 models defined using the generalized Weierstrass formula for immersion. We show that the surfaces are conformally parametrized by the Lagrangian density, with finite area equal to the action of the model, and express several other geometrical characteristics of the surface in terms of the physical quantities of the model. Finally, we provide necessary and sufficient conditions that a surface be related to a CP N-1 sigma model

Topological sigma models on supermanifolds

Energy Technology Data Exchange (ETDEWEB)

Jia, Bei, E-mail: beijia@physics.utexas.edu

2017-02-15

This paper concerns constructing topological sigma models governing maps from semirigid super Riemann surfaces to general target supermanifolds. We define both the A model and B model in this general setup by defining suitable BRST operators and physical observables. Using supersymmetric localization, we express correlation functions in these theories as integrals over suitable supermanifolds. In the case of the A model, we obtain an integral over the supermoduli space of “superinstantons”. The language of supergeometry is used extensively throughout this paper.

Little strings, quasi-topological sigma model on loop group, and toroidal Lie algebras

Directory of Open Access Journals (Sweden)

Meer Ashwinkumar

2018-03-01

Full Text Available We study the ground states and left-excited states of the Ak−1 N=(2,0 little string theory. Via a theorem by Atiyah [1], these sectors can be captured by a supersymmetric nonlinear sigma model on CP1 with target space the based loop group of SU(k. The ground states, described by L2-cohomology classes, form modules over an affine Lie algebra, while the left-excited states, described by chiral differential operators, form modules over a toroidal Lie algebra. We also apply our results to analyze the 1/2 and 1/4 BPS sectors of the M5-brane worldvolume theory.

Little strings, quasi-topological sigma model on loop group, and toroidal Lie algebras

Science.gov (United States)

Ashwinkumar, Meer; Cao, Jingnan; Luo, Yuan; Tan, Meng-Chwan; Zhao, Qin

2018-03-01

We study the ground states and left-excited states of the Ak-1 N = (2 , 0) little string theory. Via a theorem by Atiyah [1], these sectors can be captured by a supersymmetric nonlinear sigma model on CP1 with target space the based loop group of SU (k). The ground states, described by L2-cohomology classes, form modules over an affine Lie algebra, while the left-excited states, described by chiral differential operators, form modules over a toroidal Lie algebra. We also apply our results to analyze the 1/2 and 1/4 BPS sectors of the M5-brane worldvolume theory.

Symmetry breaking in six-dimensional Einstein-Maxwell-Sigma theory

International Nuclear Information System (INIS)

Shin, H.J.

1985-11-01

The mass spectrum of six-dimensional gravity theory coupled with U(1) Maxwell and non-linear sigma field is analyzed. It is shown that this electroweak-gravity model can have perturbatively stable ground state and low mass gauge bosons of SU(2). Except the graviton, photon, low mass scalar triplet and three gauge bosons, all other states acquire masses of Planck scale. (author)

Dilaton gravity, Poisson sigma models and loop quantum gravity

International Nuclear Information System (INIS)

Bojowald, Martin; Reyes, Juan D

2009-01-01

Spherically symmetric gravity in Ashtekar variables coupled to Yang-Mills theory in two dimensions and its relation to dilaton gravity and Poisson sigma models are discussed. After introducing its loop quantization, quantum corrections for inverse triad components are shown to provide a consistent deformation without anomalies. The relation to Poisson sigma models provides a covariant action principle of the quantum-corrected theory with effective couplings. Results are also used to provide loop quantizations of spherically symmetric models in arbitrary D spacetime dimensions.

Remarks on non compact sigma models

International Nuclear Information System (INIS)

Brunini, S.A.; Gomes, M.; Silva, A.J. da.

1988-01-01

O(N,1) noncompact sigma models quantized in an indefinite metric space. In two dimensions, by a direct computation the existence of a positive metric subspace where the S matrix is unitary. Is proved the properties of the model as function of the temperature are investigated in various space time dimensions. (author) [pt

Multi-Agent Modeling in Managing Six Sigma Projects

Directory of Open Access Journals (Sweden)

K. Y. Chau

2009-10-01

Full Text Available In this paper, a multi-agent model is proposed for considering the human resources factor in decision making in relation to the six sigma project. The proposed multi-agent system is expected to increase the acccuracy of project prioritization and to stabilize the human resources service level. A simulation of the proposed multiagent model is conducted. The results show that a multi-agent model which takes into consideration human resources when making decisions about project selection and project team formation is important in enabling efficient and effective project management. The multi-agent modeling approach provides an alternative approach for improving communication and the autonomy of six sigma projects in business organizations.

Supersymmetric sigma models and composite Yang-Mills theory

International Nuclear Information System (INIS)

Lukierski, J.

1980-04-01

We describe two types of supersymmetric sigma models: with field values in supercoset space and with superfields. The notion of Riemannian symmetric pair (H,G/H) is generalized to supergroups. Using the supercoset approach the superconformal-invariant model of composite U(n) Yang-Mills fields in introduced. In the framework of the superfield approach we present with some details two versions of the composite N=1 supersymmetric Yang-Mills theory in four dimensions with U(n) and U(m) x U(n) local invariance. We argue that especially the superfield sigma models can be used for the description of pre-QCD supersymmetric dynamics. (author)

Factorizable S-matrix for SO(D)/SO(2) circle times SO(D - 2) non-linear σ models with fermions

International Nuclear Information System (INIS)

Abdalla, E.; Lima-Santos, A.

1988-01-01

The authors compute the exact S matrix for the non-linear sigma model with symmetry SO(D)/SO(2) circle times SO(D-2) coupled to fermions in a minimal or supersymmetric way. The model has some relevance in string theory with non-zero external curvature

Two-dimensional sigma models: modelling non-perturbative effects of gauge theories

International Nuclear Information System (INIS)

Novikov, V.A.; Shifman, M.A.; Vainshtein, A.I.; Zakharov, V.I.

1984-01-01

The review is devoted to a discussion of non-perturbative effects in gauge theories and two-dimensional sigma models. The main emphasis is put on supersymmetric 0(3) sigma model. The instanton-based method for calculating the exact Gell-Mann-Low function and bifermionic condensate is considered in detail. All aspects of the method in simplifying conditions are discussed. The basic points are: the instanton measure from purely classical analysis; a non-renormalization theorem in self-dual external fields; existence of vacuum condensates and their compatibility with supersymmetry

Symmetry breaking in six-dimensional Einstein-Maxwell-sigma theory

International Nuclear Information System (INIS)

Shin, H.J.

1986-01-01

The mass spectrum of a six-dimensional gravity theory coupled with the U(1) Maxwell and nonlinear sigma fields is analyzed. It is shown that this electroweak-gravity model can have a perturbatively stable ground state and low-mass gauge bosons of SU(2). Except for the graviton, photon, low-mass scalar triplet, and three gauge bosons, all other states acquire masses of the Planck scale

Inclusive $\\Sigma^{+}$ and $\\Sigma^{0}$ Production in Hadronic Z Decays

CERN Document Server

Acciarri, M.; Adriani, O.; Aguilar-Benitez, M.; Alcaraz, J.; Alemanni, G.; Allaby, J.; Aloisio, A.; Alviggi, M.G.; Ambrosi, G.; Anderhub, H.; Andreev, Valery P.; Angelescu, T.; Anselmo, F.; Arefev, A.; Azemoon, T.; Aziz, T.; Bagnaia, P.; Bajo, A.; Baksay, L.; Balandras, A.; Banerjee, S.; Banerjee, Sw.; Barczyk, A.; Barillere, R.; Barone, L.; Bartalini, P.; Basile, M.; Battiston, R.; Bay, A.; Becattini, F.; Becker, U.; Behner, F.; Bellucci, L.; Berbeco, R.; Berdugo, J.; Berges, P.; Bertucci, B.; Betev, B.L.; Bhattacharya, S.; Biasini, M.; Biland, A.; Blaising, J.J.; Blyth, S.C.; Bobbink, G.J.; Bohm, A.; Boldizsar, L.; Borgia, B.; Bourilkov, D.; Bourquin, M.; Braccini, S.; Branson, J.G.; Brigljevic, V.; Brochu, F.; Buffini, A.; Buijs, A.; Burger, J.D.; Burger, W.J.; Cai, X.D.; Campanelli, Mario; Capell, M.; Cara Romeo, G.; Carlino, G.; Cartacci, A.M.; Casaus, J.; Castellini, G.; Cavallari, F.; Cavallo, N.; Cecchi, C.; Cerrada, M.; Cesaroni, F.; Chamizo, M.; Chang, Y.H.; Chaturvedi, U.K.; Chemarin, M.; Chen, A.; Chen, G.; Chen, G.M.; Chen, H.F.; Chen, H.S.; Chiefari, G.; Cifarelli, L.; Cindolo, F.; Civinini, C.; Clare, I.; Clare, R.; Coignet, G.; Colijn, A.P.; Colino, N.; Costantini, S.; Cotorobai, F.; Cozzoni, B.; de la Cruz, B.; Csilling, A.; Cucciarelli, S.; Dai, T.S.; van Dalen, J.A.; D'Alessandro, R.; de Asmundis, R.; Deglon, P.; Degre, A.; Deiters, K.; della Volpe, D.; Denes, P.; DeNotaristefani, F.; De Salvo, A.; Diemoz, M.; van Dierendonck, D.; Di Lodovico, F.; Dionisi, C.; Dittmar, M.; Dominguez, A.; Doria, A.; Dova, M.T.; Duchesneau, D.; Dufournaud, D.; Duinker, P.; Duran, I.; El Mamouni, H.; Engler, A.; Eppling, F.J.; Erne, F.C.; Extermann, P.; Fabre, M.; Faccini, R.; Falagan, M.A.; Falciano, S.; Favara, A.; Fay, J.; Fedin, O.; Felcini, M.; Ferguson, T.; Ferroni, F.; Fesefeldt, H.; Fiandrini, E.; Field, J.H.; Filthaut, F.; Fisher, P.H.; Fisk, I.; Forconi, G.; Fredj, L.; Freudenreich, K.; Furetta, C.; Galaktionov, Iouri; Ganguli, S.N.; Garcia-Abia, Pablo; Gataullin, M.; Gau, S.S.; Gentile, S.; Gheordanescu, N.; Giagu, S.; Gong, Z.F.; Grenier, Gerald Jean; Grimm, O.; Gruenewald, M.W.; Guida, M.; van Gulik, R.; Gupta, V.K.; Gurtu, A.; Gutay, L.J.; Haas, D.; Hasan, A.; Hatzifotiadou, D.; Hebbeker, T.; Herve, Alain; Hidas, P.; Hirschfelder, J.; Hofer, H.; Holzner, G.; Hoorani, H.; Hou, S.R.; Hu, Y.; Iashvili, I.; Jin, B.N.; Jones, Lawrence W.; de Jong, P.; Josa-Mutuberria, I.; Khan, R.A.; Kaur, M.; Kienzle-Focacci, M.N.; Kim, D.; Kim, J.K.; Kirkby, Jasper; Kiss, D.; Kittel, W.; Klimentov, A.; Konig, A.C.; Kopp, A.; Koutsenko, V.; Kraber, M.; Kraemer, R.W.; Krenz, W.; Kruger, A.; Kunin, A.; Ladron Ladron de Guevara, P.; Laktineh, I.; Landi, G.; Lassila-Perini, K.; Lebeau, M.; Lebedev, A.; Lebrun, P.; Lecomte, P.; Lecoq, P.; Le Coultre, P.; Lee, H.J.; Le Goff, J.M.; Leiste, R.; Leonardi, Emanuele; Levtchenko, P.; Li, C.; Likhoded, S.; Lin, C.H.; Lin, W.T.; Linde, F.L.; Lista, L.; Liu, Z.A.; Lohmann, W.; Longo, E.; Lu, Y.S.; Lubelsmeyer, K.; Luci, C.; Luckey, David; Lugnier, L.; Luminari, L.; Lustermann, W.; Ma, W.G.; Maity, M.; Malgeri, L.; Malinin, A.; Mana, C.; Mangeol, D.; Mans, J.; Marchesini, P.; Marian, G.; Martin, J.P.; Marzano, F.; Massaro, G.G.G.; Mazumdar, K.; McNeil, R.R.; Mele, S.; Merola, L.; Meschini, M.; Metzger, W.J.; von der Mey, M.; Mihul, A.; Milcent, H.; Mirabelli, G.; Mnich, J.; Mohanty, G.B.; Molnar, P.; Monteleoni, B.; Moulik, T.; Muanza, G.S.; Muheim, F.; Muijs, A.J.M.; Musy, M.; Napolitano, M.; Nessi-Tedaldi, F.; Newman, H.; Niessen, T.; Nisati, A.; Kluge, Hannelies; Organtini, G.; Oulianov, A.; Palomares, C.; Pandoulas, D.; Paoletti, S.; Paolucci, P.; Paramatti, R.; Park, H.K.; Park, I.H.; Pascale, G.; Passaleva, G.; Patricelli, S.; Paul, Thomas Cantzon; Pauluzzi, M.; Paus, C.; Pauss, F.; Pedace, M.; Pensotti, S.; Perret-Gallix, D.; Petersen, B.; Piccolo, D.; Pierella, F.; Pieri, M.; Piroue, P.A.; Pistolesi, E.; Plyaskin, V.; Pohl, M.; Pojidaev, V.; Postema, H.; Pothier, J.; Produit, N.; Prokofev, D.O.; Prokofev, D.; Quartieri, J.; Rahal-Callot, G.; Rahaman, M.A.; Raics, P.; Raja, N.; Ramelli, R.; Rancoita, P.G.; Raspereza, A.; Raven, G.; Razis, P.; Ren, D.; Rescigno, M.; Reucroft, S.; van Rhee, T.; Riemann, S.; Riles, Keith; Robohm, A.; Rodin, J.; Roe, B.P.; Romero, L.; Rosca, A.; Rosier-Lees, S.; Rubio, J.A.; Ruschmeier, D.; Rykaczewski, H.; Saremi, S.; Sarkar, S.; Salicio, J.; Sanchez, E.; Sanders, M.P.; Sarakinos, M.E.; Schafer, C.; Schegelsky, V.; Schmidt-Kaerst, S.; Schmitz, D.; Schopper, H.; Schotanus, D.J.; Schwering, G.; Sciacca, C.; Sciarrino, D.; Seganti, A.; Servoli, L.; Shevchenko, S.; Shivarov, N.; Shoutko, V.; Shumilov, E.; Shvorob, A.; Siedenburg, T.; Son, D.; Smith, B.; Spillantini, P.; Steuer, M.; Stickland, D.P.; Stone, A.; Stone, H.; Stoyanov, B.; Straessner, A.; Sudhakar, K.; Sultanov, G.; Sun, L.Z.; Suter, H.; Swain, J.D.; Szillasi, Z.; Sztaricskai, T.; Tang, X.W.; Tauscher, L.; Taylor, L.; Tellili, B.; Timmermans, Charles; Ting, Samuel C.C.; Ting, S.M.; Tonwar, S.C.; Toth, J.; Tully, C.; Tung, K.L.; Uchida, Y.; Ulbricht, J.; Valente, E.; Vesztergombi, G.; Vetlitsky, I.; Vicinanza, D.; Viertel, G.; Villa, S.; Vivargent, M.; Vlachos, S.; Vodopianov, I.; Vogel, H.; Vogt, H.; Vorobev, I.; Vorobov, A.A.; Vorvolakos, A.; Wadhwa, M.; Wallraff, W.; Wang, M.; Wang, X.L.; Wang, Z.M.; Weber, A.; Weber, M.; Wienemann, P.; Wilkens, H.; Wu, S.X.; Wynhoff, S.; Xia, L.; Xu, Z.Z.; Yamamoto, J.; Yang, B.Z.; Yang, C.G.; Yang, H.J.; Yang, M.; Ye, J.B.; Yeh, S.C.; Zalite, A.; Zalite, Yu.; Zhang, Z.P.; Zhu, G.Y.; Zhu, R.Y.; Zichichi, A.; Zilizi, G.; Zoller, M.

2000-01-01

We report on measurements of the inclusive production rate of $\\Sigma^+$ and $\\Sigma^0$ baryons in hadronic Z decays collected with the L3 detector at LEP. The $\\Sigma^+$ baryons are detected through the decay $\\Sigma^+ \\rightarrow {\\rm p} \\pi^0$, while the $\\Sigma^0$ baryons are detected via the decay mode $\\Sigma^0 \\rightarrow \\Lambda \\gamma$. The average numbers of $\\Sigma^+$ and $\\Sigma^0$ per hadronic Z decay are measured to be: \\begin{eqnarray*} \\left + \\left & = & 0.114 \\pm 0.011_{\\mbox{\\it \\small stat}} \\pm 0.009_{\\mbox{\\it \\small syst}} \\\\ \\left + \\left & = & 0.095 \\pm 0.015_{\\mbox{\\it \\small stat}} \\pm 0.013_{\\mbox{\\it \\small syst}} \\ \\mbox{.} \\end{eqnarray*} These rates are found to be higher than the predictions from Monte Carlo hadronization models and analytical parameterizations of strange baryon production.

Algebraic Structure of tt * Equations for Calabi-Yau Sigma Models

Science.gov (United States)

Alim, Murad

2017-08-01

The tt * equations define a flat connection on the moduli spaces of {2d, \\mathcal{N}=2} quantum field theories. For conformal theories with c = 3 d, which can be realized as nonlinear sigma models into Calabi-Yau d-folds, this flat connection is equivalent to special geometry for threefolds and to its analogs in other dimensions. We show that the non-holomorphic content of the tt * equations, restricted to the conformal directions, in the cases d = 1, 2, 3 is captured in terms of finitely many generators of special functions, which close under derivatives. The generators are understood as coordinates on a larger moduli space. This space parameterizes a freedom in choosing representatives of the chiral ring while preserving a constant topological metric. Geometrically, the freedom corresponds to a choice of forms on the target space respecting the Hodge filtration and having a constant pairing. Linear combinations of vector fields on that space are identified with the generators of a Lie algebra. This Lie algebra replaces the non-holomorphic derivatives of tt * and provides these with a finer and algebraic meaning. For sigma models into lattice polarized K3 manifolds, the differential ring of special functions on the moduli space is constructed, extending known structures for d = 1 and 3. The generators of the differential rings of special functions are given by quasi-modular forms for d = 1 and their generalizations in d = 2, 3. Some explicit examples are worked out including the case of the mirror of the quartic in {\\mathbbm{P}^3}, where due to further algebraic constraints, the differential ring coincides with quasi modular forms.

Harmonicity in supermanifolds and sigma models

International Nuclear Information System (INIS)

Munoz-Masque, Jaime; Vallejo, Jose A.

2009-01-01

We show that given an odd metric G on a supermanifold (M, A) and its associated Laplacian Δ, it is possible to interpret harmonic superfunctions (i.e., those f is an element of A such that Δf = 0) as solutions to a variational problem describing a supersymmetric sigma model.

Some examples of instantons in sigma models

International Nuclear Information System (INIS)

Kogan, Ya.; Markushevich, D.; Morozov, A.; Ol'shanetskya, M.; Perelomov, A.; Roslij, A.

1988-01-01

Instantons on some manifolds of type K3 are described. Zero modes in two-dimensional sigma models on such manifolds are counted. The necessary facts on K3 manifolds are exposed in monographs. Instanton configurations are described

Sigma models in (4,4) harmonic superspace

International Nuclear Information System (INIS)

Ivanov, E.; Joint Inst. for Nuclear Research, Dubna; Sutulin, A.

1994-04-01

We define basics of (4,4) 2D harmonic superspace with two independent sets of SU(2) harmonic variables and apply it to construct new superfield actions of (4,4) supersymmetric two-dimensional sigma models with torsion and mutually commuting left and right complex structures, as well as of their massive deformations. We show that the generic off-shell sigma model action is the general action of constrained analytic superfields q (1,1) representing twisted N=4 multiplets in (4,4) harmonic superspace. The massive term of q (1,1) is shown to be unique; it generates a scalar potential the form of which is determined by the metric on the target bosonic manifold. We discuss in detail (4,4) supersymmetric group manifold SU(2)xU(1) WZNW sigma model and its Liouville deformation. A deep analogy of the relevant superconformally invariant analytic superfield action to that of the improved tensor N=2 4D multiplet is found. We define (4,4) duality transformation and find new off-shell dual representations of the previously constructed actions via unconstrained analytic (4,4) superfields. The main peculiarities of the (4,4) duality transformation are: (i) It preserves manifest (4,4) supersymmetry; (ii) dual actions reveal a gauge invariance needed for the onshell equivalence to the original description; (iii) in the actions dual to the massive ones 2D supersymmetry is modified off shell by SU(2) tensor central charges. The dual representation suggests some hints of how to describe (4,4) models with non-commuting complex structures in the harmonic superspace. (orig.)

Strings as multi-particle states of quantum sigma-models

International Nuclear Information System (INIS)

Gromov, Nikolay; Kazakov, Vladimir; Sakai, Kazuhiro; Vieira, Pedro

2007-01-01

We study the quantum Bethe ansatz equations in the O(2n) sigma-model for physical particles on a circle, with the interaction given by the Zamolodchikovs'S-matrix, in view of its application to quantization of the string on the S 2n-1 xR t space. For a finite number of particles, the system looks like an inhomogeneous integrable O(2n) spin chain. Similarly to OSp(2m+n|2m) conformal sigma-model considered by Mann and Polchinski, we reproduce in the limit of large density of particles the finite gap Kazakov-Marshakov-Minahan-Zarembo solution for the classical string and its generalization to the S 5 xR t sector of the Green-Schwarz-Metsaev-Tseytlin superstring. We also reproduce some quantum effects: the BMN limit and the quantum homogeneous spin chain similar to the one describing the bosonic sector of the one-loop N=4 super-Yang-Mills theory. We discuss the prospects of generalization of these Bethe equations to the full superstring sigma-model

Branes in Poisson sigma models

International Nuclear Information System (INIS)

Falceto, Fernando

2010-01-01

In this review we discuss possible boundary conditions (branes) for the Poisson sigma model. We show how to carry out the perturbative quantization in the presence of a general pre-Poisson brane and how this is related to the deformation quantization of Poisson structures. We conclude with an open problem: the perturbative quantization of the system when the boundary has several connected components and we use a different pre-Poisson brane in every component.

Some examples of instantons in sigma models

International Nuclear Information System (INIS)

Kogan, Ya.; Markushevich, D.; Morozov, A.; Ol'shanetskij, M.; Perelomov, A.; Roslyj, A.

1988-01-01

Holomorphic instantons of arbitrary generation in manifolds and their boson and fermion zero modes are determined within the scope of the sigma model. General formulae for their quantitative evaluation are presented. Zero modes of spherical and toroidal instantons are discussed in detail

Modelo de referência para estruturar o Seis Sigma nas organizações Reference model to structure the Six Sigma in organizations

Directory of Open Access Journals (Sweden)

Adriana Barbosa Santos

2008-04-01

Full Text Available Este artigo apresenta o modelo de referência para estruturar o Seis Sigma, o qual é resultante da incorporação de teorias que contribuem para aumentar o potencial estratégico do Seis Sigma no sentido de incrementar o desempenho organizacional. Em sua proposta, o modelo de referência engloba um direcionamento sobre certos requisitos primordiais para o sucesso do programa Seis Sigma. A base teórica de sustentação do modelo de referência foi construída a partir de estudos sobre a influência dos seguintes fatores: orientação estratégica e alinhamento estratégico; medição e gerenciamento do desempenho organizacional; uso de estatística (pensamento estatístico; capacitação/especialização de pessoas; implementação e gerenciamento de projetos; e uso de tecnologia de informação. Complementando a proposição do modelo, o artigo traz evidências empíricas acerca da contribuição dos fatores identificados na formulação do modelo de referência, expondo resultados decorrentes de estudos de caso realizados em quatro subsidiárias brasileiras de multinacionais de grande porte. A análise dos dados forneceu evidências positivas de que os fatores mencionados influenciam de forma efetiva o sucesso e a consolidação do Seis Sigma nas empresas estudadas.This paper introduces the reference model to structure Six Sigma. This model is a result of theory incorporation that contributes to increase the strategic power of Six Sigma for improving businesses performance. Reference model proposal points out certain primordial requirements for de Six Sigma program success. The theoretical basis to sustain the reference model was supported in studies about the influence of critical factors such as: strategic orientation and strategic alignment; business performance measurement; statistical approach (statistical thinking; people training; project implementation; and information technology use. Complementing the model proposition, this paper

Hairy AdS black holes with a toroidal horizon in 4D Einstein-nonlinear omega-model system

Czech Academy of Sciences Publication Activity Database

Astorino, M.; Canfora, F.; Giacomini, A.; Ortaggio, Marcello

2018-01-01

Roč. 776, 10 January (2018), s. 236-241 ISSN 0370-2693 R&D Projects: GA ČR GB14-37086G Institutional support: RVO:67985840 Keywords : AdS black holes * nonlinear sigma model Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics Impact factor: 4.807, year: 2016 http://www.sciencedirect.com/science/article/pii/S0370269317309437

Hairy AdS black holes with a toroidal horizon in 4D Einstein-nonlinear omega-model system

Czech Academy of Sciences Publication Activity Database

Astorino, M.; Canfora, F.; Giacomini, A.; Ortaggio, Marcello

2018-01-01

Roč. 776, 10 January (2018), s. 236-241 ISSN 0370-2693 R&D Projects: GA ČR GB14-37086G Institutional support: RVO:67985840 Keywords : AdS black holes * nonlinear sigma model Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics Impact factor: 4.807, year: 2016 http://www.sciencedirect.com/science/ article /pii/S0370269317309437

Topological Poisson Sigma models on Poisson-Lie groups

International Nuclear Information System (INIS)

Calvo, Ivan; Falceto, Fernando; Garcia-Alvarez, David

2003-01-01

We solve the topological Poisson Sigma model for a Poisson-Lie group G and its dual G*. We show that the gauge symmetry for each model is given by its dual group that acts by dressing transformations on the target. The resolution of both models in the open geometry reveals that there exists a map from the reduced phase of each model (P and P*) to the main symplectic leaf of the Heisenberg double (D 0 ) such that the symplectic forms on P, P* are obtained as the pull-back by those maps of the symplectic structure on D 0 . This uncovers a duality between P and P* under the exchange of bulk degrees of freedom of one model with boundary degrees of freedom of the other one. We finally solve the Poisson Sigma model for the Poisson structure on G given by a pair of r-matrices that generalizes the Poisson-Lie case. The Hamiltonian analysis of the theory requires the introduction of a deformation of the Heisenberg double. (author)

The coupling of Poisson sigma models to topological backgrounds

Energy Technology Data Exchange (ETDEWEB)

Rosa, Dario [School of Physics, Korea Institute for Advanced Study,Seoul 02455 (Korea, Republic of)

2016-12-13

We extend the coupling to the topological backgrounds, recently worked out for the 2-dimensional BF-model, to the most general Poisson sigma models. The coupling involves the choice of a Casimir function on the target manifold and modifies the BRST transformations. This in turn induces a change in the BRST cohomology of the resulting theory. The observables of the coupled theory are analyzed and their geometrical interpretation is given. We finally couple the theory to 2-dimensional topological gravity: this is the first step to study a topological string theory in propagation on a Poisson manifold. As an application, we show that the gauge-fixed vectorial supersymmetry of the Poisson sigma models has a natural explanation in terms of the theory coupled to topological gravity.

Semi-doubled sigma models for five-branes

International Nuclear Information System (INIS)

Kimura, Tetsuji

2016-01-01

We study two-dimensional N=(2,2) gauge theory and its dualized system in terms of complex (linear) superfields and their alternatives. Although this technique itself is not new, we can obtain a new model, the so-called “semi-doubled” GLSM. Similar to doubled sigma model, this involves both the original and dual degrees of freedom simultaneously, whilst the latter only contribute to the system via topological interactions. Applying this to the N=(4,4) GLSM for H-monopoles, i.e., smeared NS5-branes, we obtain its T-dualized systems in quite an easy way. As a bonus, we also obtain the semi-doubled GLSM for an exotic 5_2"3-brane whose background is locally nongeometric. In the low energy limit, we construct the semi-doubled NLSM which also generates the conventional string worldsheet sigma models. In the case of the NLSM for 5_2"3-brane, however, we find that the Dirac monopole equation does not make sense any more because the physical information is absorbed into the divergent part via the smearing procedure. This is nothing but the signal which indicates that the nongeometric feature emerges in the considering model.

Generalized Mathai-Quillen Topological Sigma Models

OpenAIRE

Llatas, Pablo M.

1995-01-01

A simple field theoretical approach to Mathai-Quillen topological field theories of maps $X: M_I \\to M_T$ from an internal space to a target space is presented. As an example of applications of our formalism we compute by applying our formulas the action and Q-variations of the fields of two well known topological systems: Topological Quantum Mechanics and type-A topological Sigma Model.

Description of surfaces associated with Grassmannian sigma models on Minkowski space

International Nuclear Information System (INIS)

Grundland, A.M.; Snobl, L.

2005-01-01

We construct and investigate smooth orientable surfaces in su(N) algebras. The structural equations of surfaces associated with Grassmannian sigma models on Minkowski space are studied using moving frames adapted to the surfaces. The first and second fundamental forms of these surfaces as well as the relations between them as expressed in the Gauss-Weingarten and Gauss-Codazzi-Ricci equations are found. The scalar curvature and the mean curvature vector expressed in terms of a solution of Grassmanian sigma model are obtained

Low-energy limit of the extended Linear Sigma Model

Energy Technology Data Exchange (ETDEWEB)

Divotgey, Florian [Johann Wolfgang Goethe-Universitaet, Institut fuer Theoretische Physik, Frankfurt am Main (Germany); Kovacs, Peter [Wigner Research Center for Physics, Hungarian Academy of Sciences, Institute for Particle and Nuclear Physics, Budapest (Hungary); GSI Helmholtzzentrum fuer Schwerionenforschung, ExtreMe Matter Institute, Darmstadt (Germany); Giacosa, Francesco [Johann Wolfgang Goethe-Universitaet, Institut fuer Theoretische Physik, Frankfurt am Main (Germany); Jan-Kochanowski University, Institute of Physics, Kielce (Poland); Rischke, Dirk H. [Johann Wolfgang Goethe-Universitaet, Institut fuer Theoretische Physik, Frankfurt am Main (Germany); University of Science and Technology of China, Interdisciplinary Center for Theoretical Study and Department of Modern Physics, Hefei, Anhui (China)

2018-01-15

The extended Linear Sigma Model is an effective hadronic model based on the linear realization of chiral symmetry SU(N{sub f}){sub L} x SU(N{sub f}){sub R}, with (pseudo)scalar and (axial-)vector mesons as degrees of freedom. In this paper, we study the low-energy limit of the extended Linear Sigma Model (eLSM) for N{sub f} = flavors by integrating out all fields except for the pions, the (pseudo-)Nambu-Goldstone bosons of chiral symmetry breaking. The resulting low-energy effective action is identical to Chiral Perturbation Theory (ChPT) after choosing a representative for the coset space generated by chiral symmetry breaking and expanding it in powers of (derivatives of) the pion fields. The tree-level values of the coupling constants of the effective low-energy action agree remarkably well with those of ChPT. (orig.)

The hyper-Kaehler supersymmetric sigma-model in six dimensions

International Nuclear Information System (INIS)

Sierra, G.; Townsend, P.K.

1983-01-01

The maximally supersymmetric, hyper-Kaehler, sigma-model is given in six-dimensional superfield form. The hyper-Kaehler condition follows from the requirements that the equations of motion be derivable from an action. (orig.)

Structure of the discrete Dirac vacuum in the sigma + omega model

International Nuclear Information System (INIS)

Miller, L.D.

1989-01-01

The sigma + omega model potentials imply that any moderate to large nucleus should have thousands of discrete negative-energy nucleon states. Theoretical predictions of structure in this discrete island of the nuclear Dirac sea are presented in this paper. This structure is related to the spectral functions that will emerge in high energy electron- and hardon-induced reactions on nuclei. These high-energy reaction studies should supplement our understanding of the saturation mechanism of the sigma + omega model. They could also identify the threshold for observable quantum chromo-dynamics (QCD) effects in nuclei

Monte Carlo simulations with Symanzik's improved actions in the lattice 0(3) non-linear sigma-model

International Nuclear Information System (INIS)

Berg, B.; Montvay, I.; Meyer, S.

1983-10-01

The scaling properties of the lattice 0(3) non-linear delta-model are studied. The mass-gap, energy-momentum dispersion, correlation functions are measured by numerical Monte Carlo methods. Symanzik's tree-level and 1-loop improved actions are compared to the standard (nearest neigbour) action. (orig.)

A review of Lean Six Sigma deployment and maturity models

NARCIS (Netherlands)

Lameijer, B.A.; de Mast, J.; Does, R.J.M.M.

2017-01-01

For guidance in implementing Lean Six Sigma (LSS), both the academic and the practitioners’ literature offer deployment models and models for assessing the implementation’s maturity. This paper makes a critical appraisal of the quality and usefulness of a sample of 19 such models. The appraisal

Six Sigma software development

CERN Document Server

Tayntor, Christine B

2002-01-01

Since Six Sigma has had marked success in improving quality in other settings, and since the quality of software remains poor, it seems a natural evolution to apply the concepts and tools of Six Sigma to system development and the IT department. Until now however, there were no books available that applied these concepts to the system development process. Six Sigma Software Development fills this void and illustrates how Six Sigma concepts can be applied to all aspects of the evolving system development process. It includes the traditional waterfall model and in the support of legacy systems,

Running Head: Implementing Six Sigma Efforts

Science.gov (United States)

Lindsay, Jamie Eleaitia Mae

2005-01-01

Six Sigma is an organization wide program that provides common set of goals, language, and methodology for improving the overall quality of the processes within the organization (Davis & Heineke 2004). Six Sigma main concern is for the customer. What will the customers want? Need? Six Sigma has a model that helps Sigma get implemented DMAIC model…

(4,0) supersymmetric sigma-model and t-duality

International Nuclear Information System (INIS)

Lhallabi, T.

1997-08-01

The conserved supercurrents J ++ and J -- are deduced for the (4,0) supersymmetric sigma model on harmonic superspace with arbitrary background gauge connection. These are introduced in the Lagrangian density of the model by their couplings to the analytic gauge superfields Γ -- and Γ ++ . The T-duality transformations are obtained by integrating out the analytic gauge superfields. Finally the (4,0) supersymmetric anomaly is derived. (author). 20 refs

Baryons as solitonic solutions of the chiral sigma model

International Nuclear Information System (INIS)

Bentz, W.; Hartmann, J.; Beck, F.

1996-01-01

Self-consistent solitonic solutions with baryon number one are obtained in the chiral quark sigma model. The translational invariant vacuum is stabilized by a Landau ghost subtraction procedure based on the requirement of the Kaellacute en-Lehmann (KL) representation for the meson propagators. The connection of this ghost free model (KL model) to the more popular Nambu-Jona-Lasinio (NJL) model is discussed in detail. copyright 1996 The American Physical Society

Generalized complex geometry, generalized branes and the Hitchin sigma model

International Nuclear Information System (INIS)

Zucchini, Roberto

2005-01-01

Hitchin's generalized complex geometry has been shown to be relevant in compactifications of superstring theory with fluxes and is expected to lead to a deeper understanding of mirror symmetry. Gualtieri's notion of generalized complex submanifold seems to be a natural candidate for the description of branes in this context. Recently, we introduced a Batalin-Vilkovisky field theoretic realization of generalized complex geometry, the Hitchin sigma model, extending the well known Poisson sigma model. In this paper, exploiting Gualtieri's formalism, we incorporate branes into the model. A detailed study of the boundary conditions obeyed by the world sheet fields is provided. Finally, it is found that, when branes are present, the classical Batalin-Vilkovisky cohomology contains an extra sector that is related non trivially to a novel cohomology associated with the branes as generalized complex submanifolds. (author)

2D Poisson sigma models with gauged vectorial supersymmetry

Energy Technology Data Exchange (ETDEWEB)

Bonezzi, Roberto [Dipartimento di Fisica ed Astronomia, Università di Bologna and INFN, Sezione di Bologna,via Irnerio 46, I-40126 Bologna (Italy); Departamento de Ciencias Físicas, Universidad Andres Bello,Republica 220, Santiago (Chile); Sundell, Per [Departamento de Ciencias Físicas, Universidad Andres Bello,Republica 220, Santiago (Chile); Torres-Gomez, Alexander [Departamento de Ciencias Físicas, Universidad Andres Bello,Republica 220, Santiago (Chile); Instituto de Ciencias Físicas y Matemáticas, Universidad Austral de Chile-UACh,Valdivia (Chile)

2015-08-12

In this note, we gauge the rigid vectorial supersymmetry of the two-dimensional Poisson sigma model presented in arXiv:1503.05625. We show that the consistency of the construction does not impose any further constraints on the differential Poisson algebra geometry than those required for the ungauged model. We conclude by proposing that the gauged model provides a first-quantized framework for higher spin gravity.

Massive (p,q)-supersymmetric sigma models revisited

International Nuclear Information System (INIS)

Papadopoulos, G.

1994-06-01

We recently obtained the conditions on the couplings of the general two-dimensional massive sigma-model required by (p,q)-supersymmetry. Here wer compute the Poisson bracket algebra of the supersymmetry and central Noether charges, and show that the action is invariant under the automorphism group of this algebra. Surprisingly, for the (4,4) case the automorphism group is always a subgroup of SO(3), rather than SO(4). We also re-analyse the conditions for (2,2) and 4,4) supersymmetry of the zero torsion models without assumptions about the central charge matrix. (orig.)

Euclidean supersymmetry, twisting and topological sigma models

International Nuclear Information System (INIS)

Hull, C.M.; Lindstroem, U.; Santos, L. Melo dos; Zabzine, M.; Unge, R. von

2008-01-01

We discuss two dimensional N-extended supersymmetry in Euclidean signature and its R-symmetry. For N = 2, the R-symmetry is SO(2) x SO(1, 1), so that only an A-twist is possible. To formulate a B-twist, or to construct Euclidean N = 2 models with H-flux so that the target geometry is generalised Kahler, it is necessary to work with a complexification of the sigma models. These issues are related to the obstructions to the existence of non-trivial twisted chiral superfields in Euclidean superspace.

Sv-map between type I and heterotic sigma models

Science.gov (United States)

Fan, Wei; Fotopoulos, A.; Stieberger, S.; Taylor, T. R.

2018-05-01

The scattering amplitudes of gauge bosons in heterotic and open superstring theories are related by the single-valued projection which yields heterotic amplitudes by selecting a subset of multiple zeta value coefficients in the α‧ (string tension parameter) expansion of open string amplitudes. In the present work, we argue that this relation holds also at the level of low-energy expansions (or individual Feynman diagrams) of the respective effective actions, by investigating the beta functions of two-dimensional sigma models describing world-sheets of open and heterotic strings. We analyze the sigma model Feynman diagrams generating identical effective action terms in both theories and show that the heterotic coefficients are given by the single-valued projection of the open ones. The single-valued projection appears as a result of summing over all radial orderings of heterotic vertices on the complex plane representing string world-sheet.

Sigma models with purely Wess-Zumino-Witten actions

International Nuclear Information System (INIS)

Floreanini, R.; Percacci, R.; Sezgin, E.

1988-11-01

We study the dynamics of sigma models in arbitrary dimensions with purely Wess-Zumino-Witten actions (i.e. without kinetic terms), both from the Lagrangian and Hamiltonian point of view. These models have nontrivial gauge groups which contain the diffeomorphisms of space-time, as well as symmetry groups which in many cases turn out to be infinite dimensional. We give examples in 1,2,3 and 4 space-time dimensions.(author). 9 refs

On the nucleon-nucleon potential obtained from non-linear coupling

International Nuclear Information System (INIS)

El Ghabaty, S.S.

1975-07-01

The static limit of a pseudoscalar symmetric meson theory of nuclear forces is examined. The Born-Oppenheimer potential is determined for the case of two very heavy nucleons exchanging pseudoscalar isovector pions with non-linear coupling. It is found that the non-linear terms induced by the γ 5 coupling are cancelled by the additional pion-nucleon coupling of the non-linear sigma model. The nucleon-nucleon potential thus obtained is the same as the Yukava potential except for strength at different separations between the two nucleons

Sigma-delta modulator modeling analysis and design

International Nuclear Information System (INIS)

Ge Binjie; Wang Xin'an; Zhang Xing; Feng Xiaoxing; Wang Qingqin

2010-01-01

This paper introduces a new method for SC sigma-delta modulator modeling. It studies the integrator's different equivalent circuits in the integrating and sampling phases. This model uses the OP-AMP input pair's tail current (I 0 ) and overdrive voltage (v on ) as variables. The modulator's static and dynamic errors are analyzed. A group of optimized I 0 and v on for maximum SNR and power x area ratio can be obtained through this model. As examples, a MASH21 modulator for digital audio and a second order modulator for RFID baseband are implemented and tested, and they can achieve 91 dB and 72 dB respectively, which verifies the modeling and design criteria. (semiconductor integrated circuits)

Comparing Consider-Covariance Analysis with Sigma-Point Consider Filter and Linear-Theory Consider Filter Formulations

Science.gov (United States)

Lisano, Michael E.

2007-01-01

Recent literature in applied estimation theory reflects growing interest in the sigma-point (also called unscented ) formulation for optimal sequential state estimation, often describing performance comparisons with extended Kalman filters as applied to specific dynamical problems [c.f. 1, 2, 3]. Favorable attributes of sigma-point filters are described as including a lower expected error for nonlinear even non-differentiable dynamical systems, and a straightforward formulation not requiring derivation or implementation of any partial derivative Jacobian matrices. These attributes are particularly attractive, e.g. in terms of enabling simplified code architecture and streamlined testing, in the formulation of estimators for nonlinear spaceflight mechanics systems, such as filter software onboard deep-space robotic spacecraft. As presented in [4], the Sigma-Point Consider Filter (SPCF) algorithm extends the sigma-point filter algorithm to the problem of consider covariance analysis. Considering parameters in a dynamical system, while estimating its state, provides an upper bound on the estimated state covariance, which is viewed as a conservative approach to designing estimators for problems of general guidance, navigation and control. This is because, whether a parameter in the system model is observable or not, error in the knowledge of the value of a non-estimated parameter will increase the actual uncertainty of the estimated state of the system beyond the level formally indicated by the covariance of an estimator that neglects errors or uncertainty in that parameter. The equations for SPCF covariance evolution are obtained in a fashion similar to the derivation approach taken with standard (i.e. linearized or extended) consider parameterized Kalman filters (c.f. [5]). While in [4] the SPCF and linear-theory consider filter (LTCF) were applied to an illustrative linear dynamics/linear measurement problem, in the present work examines the SPCF as applied to

Poisson sigma model with branes and hyperelliptic Riemann surfaces

International Nuclear Information System (INIS)

Ferrario, Andrea

2008-01-01

We derive the explicit form of the superpropagators in the presence of general boundary conditions (coisotropic branes) for the Poisson sigma model. This generalizes the results presented by Cattaneo and Felder [''A path integral approach to the Kontsevich quantization formula,'' Commun. Math. Phys. 212, 591 (2000)] and Cattaneo and Felder ['Coisotropic submanifolds in Poisson geometry and branes in the Poisson sigma model', Lett. Math. Phys. 69, 157 (2004)] for Kontsevich's angle function [Kontsevich, M., 'Deformation quantization of Poisson manifolds I', e-print arXiv:hep.th/0101170] used in the deformation quantization program of Poisson manifolds. The relevant superpropagators for n branes are defined as gauge fixed homotopy operators of a complex of differential forms on n sided polygons P n with particular ''alternating'' boundary conditions. In the presence of more than three branes we use first order Riemann theta functions with odd singular characteristics on the Jacobian variety of a hyperelliptic Riemann surface (canonical setting). In genus g the superpropagators present g zero mode contributions

5D-QSAR for spirocyclic sigma1 receptor ligands by Quasar receptor surface modeling.

Science.gov (United States)

Oberdorf, Christoph; Schmidt, Thomas J; Wünsch, Bernhard

2010-07-01

Based on a contiguous and structurally as well as biologically diverse set of 87 sigma(1) ligands, a 5D-QSAR study was conducted in which a quasi-atomistic receptor surface modeling approach (program package Quasar) was applied. The superposition of the ligands was performed with the tool Pharmacophore Elucidation (MOE-package), which takes all conformations of the ligands into account. This procedure led to four pharmacophoric structural elements with aromatic, hydrophobic, cationic and H-bond acceptor properties. Using the aligned structures a 3D-model of the ligand binding site of the sigma(1) receptor was obtained, whose general features are in good agreement with previous assumptions on the receptor structure, but revealed some novel insights since it represents the receptor surface in more detail. Thus, e.g., our model indicates the presence of an H-bond acceptor moiety in the binding site as counterpart to the ligands' cationic ammonium center, rather than a negatively charged carboxylate group. The presented QSAR model is statistically valid and represents the biological data of all tested compounds, including a test set of 21 ligands not used in the modeling process, with very good to excellent accuracy [q(2) (training set, n=66; leave 1/3 out) = 0.84, p(2) (test set, n=21)=0.64]. Moreover, the binding affinities of 13 further spirocyclic sigma(1) ligands were predicted with reasonable accuracy (mean deviation in pK(i) approximately 0.8). Thus, in addition to novel insights into the requirements for binding of spirocyclic piperidines to the sigma(1) receptor, the presented model can be used successfully in the rational design of new sigma(1) ligands. Copyright (c) 2010 Elsevier Masson SAS. All rights reserved.

String Sigma Models on Curved Supermanifolds

Directory of Open Access Journals (Sweden)

Roberto Catenacci

2018-04-01

Full Text Available We use the techniques of integral forms to analyze the easiest example of two-dimensional sigma models on a supermanifold. We write the action as an integral of a top integral form over a D = 2 supermanifold, and we show how to interpolate between different superspace actions. Then, we consider curved supermanifolds, and we show that the definitions used for flat supermanifolds can also be used for curved supermanifolds. We prove it by first considering the case of a curved rigid supermanifold and then the case of a generic curved supermanifold described by a single superfield E.

Nambu sigma model and effective membrane actions

Energy Technology Data Exchange (ETDEWEB)

Jurco, Branislav, E-mail: jurco@karlin.mff.cuni.cz [Mathematical Institute, Charles University, Prague 186 75 (Czech Republic); Schupp, Peter, E-mail: p.schupp@jacobs-university.de [Jacobs University Bremen, 28759 Bremen (Germany); Maxwell Institute for Mathematical Sciences, Heriot-Watt University, Edinburgh, EH14 4AS, Scotland (United Kingdom)

2012-07-09

We propose an effective action for a p{sup Prime }-brane with open p-branes ending on it. The action has dual descriptions similar to the commutative and non-commutative ones of the DBI action for D-branes and open strings. The Poisson structure governing the non-commutativity of the D-brane is replaced by a Nambu structure and the open-closed string relations are generalized to the case of p-branes utilizing a novel Nambu sigma model description of p-branes. In the case of an M5-brane our action interpolates between M5-actions already proposed in the literature and matrix-model like actions involving Nambu structures.

Nambu sigma model and effective membrane actions

International Nuclear Information System (INIS)

Jurčo, Branislav; Schupp, Peter

2012-01-01

We propose an effective action for a p ′ -brane with open p-branes ending on it. The action has dual descriptions similar to the commutative and non-commutative ones of the DBI action for D-branes and open strings. The Poisson structure governing the non-commutativity of the D-brane is replaced by a Nambu structure and the open-closed string relations are generalized to the case of p-branes utilizing a novel Nambu sigma model description of p-branes. In the case of an M5-brane our action interpolates between M5-actions already proposed in the literature and matrix-model like actions involving Nambu structures.

Universality for 1d Random Band Matrices: Sigma-Model Approximation

Science.gov (United States)

Shcherbina, Mariya; Shcherbina, Tatyana

2018-02-01

The paper continues the development of the rigorous supersymmetric transfer matrix approach to the random band matrices started in (J Stat Phys 164:1233-1260, 2016; Commun Math Phys 351:1009-1044, 2017). We consider random Hermitian block band matrices consisting of W× W random Gaussian blocks (parametrized by j,k \\in Λ =[1,n]^d\\cap Z^d ) with a fixed entry's variance J_{jk}=δ _{j,k}W^{-1}+β Δ _{j,k}W^{-2} , β >0 in each block. Taking the limit W→ ∞ with fixed n and β , we derive the sigma-model approximation of the second correlation function similar to Efetov's one. Then, considering the limit β , n→ ∞, we prove that in the dimension d=1 the behaviour of the sigma-model approximation in the bulk of the spectrum, as β ≫ n , is determined by the classical Wigner-Dyson statistics.

Dynamical simulation of a linear sigma model near the critical point

Energy Technology Data Exchange (ETDEWEB)

Wesp, Christian; Meistrenko, Alex; Greiner, Carsten [Institut fuer Theoretische Physik, Goethe-Universitaet Frankfurt, Max-von-Laue-Strasse 1, D-60438 Frankfurt (Germany); Hees, Hendrik van [Frankfurt Institute for Advanced Studies, Ruth-Moufang-Strasse 1, D-60438 Frankfurt (Germany)

2014-07-01

The intention of this study is the search for signatures of the chiral phase transition. To investigate the impact of fluctuations, e.g. of the baryon number, on the transition or a critical point, the linear sigma model is treated in a dynamical 3+1D numerical simulation. Chiral fields are approximated as classical fields, quarks are described by quasi particles in a Vlasov equation. Additional dynamic is implemented by quark-quark and quark-sigma-field interaction. For a consistent description of field-particle interactions, a new Monte-Carlo-Langevin-like formalism has been developed and is discussed.

Sigma-delta modulator modeling analysis and design

Energy Technology Data Exchange (ETDEWEB)

Ge Binjie; Wang Xin' an; Zhang Xing; Feng Xiaoxing; Wang Qingqin, E-mail: wangxa@szpku.edu.c [Key Laboratory of Integrated Microsystem Science and Engineering Applications, Shenzhen Graduate School of Peking University, Shenzhen 518055 (China)

2010-09-15

This paper introduces a new method for SC sigma-delta modulator modeling. It studies the integrator's different equivalent circuits in the integrating and sampling phases. This model uses the OP-AMP input pair's tail current (I{sub 0}) and overdrive voltage (v{sub on}) as variables. The modulator's static and dynamic errors are analyzed. A group of optimized I{sub 0} and v{sub on} for maximum SNR and power x area ratio can be obtained through this model. As examples, a MASH21 modulator for digital audio and a second order modulator for RFID baseband are implemented and tested, and they can achieve 91 dB and 72 dB respectively, which verifies the modeling and design criteria. (semiconductor integrated circuits)

Orientifolds and D-branes in N=2 gauged linear sigma models

CERN Document Server

Brunner, Ilka

We study parity symmetries and boundary conditions in the framework of gauged linear sigma models. This allows us to investigate the Kaehler moduli dependence of the physics of D-branes as well as orientifolds in a Calabi-Yau compactification. We first determine the parity action on D-branes and define the set of orientifold-invariant D-branes in the linear sigma model. Using probe branes on top of orientifold planes, we derive a general formula for the type (SO vs Sp) of orientifold planes. As applications, we show how compactifications with and without vector structure arise naturally at different real slices of the Kaehler moduli space of a Calabi-Yau compactification. We observe that orientifold planes located at certain components of the fixed point locus can change type when navigating through the stringy regime.

Nonabelian Gauged Linear Sigma Model

Institute of Scientific and Technical Information of China (English)

Yongbin RUAN

2017-01-01

The gauged linear sigma model (GLSM for short) is a 2d quantum field theory introduced by Witten twenty years ago.Since then,it has been investigated extensively in physics by Hori and others.Recently,an algebro-geometric theory (for both abelian and nonabelian GLSMs) was developed by the author and his collaborators so that he can start to rigorously compute its invariants and check against physical predications.The abelian GLSM was relatively better understood and is the focus of current mathematical investigation.In this article,the author would like to look over the horizon and consider the nonabelian GLSM.The nonabelian case possesses some new features unavailable to the abelian GLSM.To aid the future mathematical development,the author surveys some of the key problems inspired by physics in the nonabelian GLSM.

Geometry of surfaces associated to Grassmannian sigma models

International Nuclear Information System (INIS)

Delisle, L; Hussin, V; Zakrzewski, W J

2015-01-01

We investigate the geometric characteristics of constant Gaussian curvature surfaces obtained from solutions of the G(m, n) sigma model. Most of these solutions are related to the Veronese sequence. We show that we can distinguish surfaces with the same Gaussian curvature using additional quantities like the topological charge and the mean curvature. The cases of G(1,n) = CP n-1 and G(2,n) are used to illustrate these characteristics. (paper)

Toward a scalable flexible-order model for 3D nonlinear water waves

DEFF Research Database (Denmark)

Engsig-Karup, Allan Peter; Ducrozet, Guillaume; Bingham, Harry B.

For marine and coastal applications, current work are directed toward the development of a scalable numerical 3D model for fully nonlinear potential water waves over arbitrary depths. The model is high-order accurate, robust and efficient for large-scale problems, and support will be included...... for flexibility in the description of structures by the use of curvilinear boundary-fitted meshes. The mathematical equations for potential waves in the physical domain is transformed through $\\sigma$-mapping(s) to a time-invariant boundary-fitted domain which then becomes a basis for an efficient solution...... strategy on a time-invariant mesh. The 3D numerical model is based on a finite difference method as in the original works \\cite{LiFleming1997,BinghamZhang2007}. Full details and other aspects of an improved 3D solution can be found in \\cite{EBL08}. The new and improved approach for three...

LDRD report nonlinear model reduction

Energy Technology Data Exchange (ETDEWEB)

Segalman, D.; Heinstein, M.

1997-09-01

The very general problem of model reduction of nonlinear systems was made tractable by focusing on the very large subclass consisting of linear subsystems connected by nonlinear interfaces. Such problems constitute a large part of the nonlinear structural problems encountered in addressing the Sandia missions. A synthesis approach to this class of problems was developed consisting of: detailed modeling of the interface mechanics; collapsing the interface simulation results into simple nonlinear interface models; constructing system models by assembling model approximations of the linear subsystems and the nonlinear interface models. These system models, though nonlinear, would have very few degrees of freedom. A paradigm problem, that of machine tool vibration, was selected for application of the reduction approach outlined above. Research results achieved along the way as well as the overall modeling of a specific machine tool have been very encouraging. In order to confirm the interface models resulting from simulation, it was necessary to develop techniques to deduce interface mechanics from experimental data collected from the overall nonlinear structure. A program to develop such techniques was also pursued with good success.

Development of a system dynamics model based on Six Sigma methodology

Directory of Open Access Journals (Sweden)

José Jovani Cardiel Ortega

2017-01-01

Full Text Available A dynamic model to analyze the complexity associated with the manufacturing systems and to improve the performance of the process through the Six Sigma philosophy is proposed. The research focuses on the implementation of the system dynamics tool to comply with each of the phases of the DMAIC methodology. In the first phase, define, the problem is articulated, collecting data, selecting the variables, and representing them in a mental map that helps build the dynamic hypothesis. In the second phase, measure, model is formulated, equations are developed, and Forrester diagram is developed to carry out the simulation. In the third phase, analyze, the simulation results are studied. For the fourth phase, improving, the model is validated through a sensitivity analysis. Finally, in control phase, operation policies are proposed. This paper presents the development of a dynamic model of the system of knitted textile production knitted developed; the implementation was done in a textile company in southern Guanajuato. The results show an improvement in the process performance by increasing the level of sigma allowing the validation of the proposed approach.

Comparison of Sigma-Point and Extended Kalman Filters on a Realistic Orbit Determination Scenario

Science.gov (United States)

Gaebler, John; Hur-Diaz. Sun; Carpenter, Russell

2010-01-01

Sigma-point filters have received a lot of attention in recent years as a better alternative to extended Kalman filters for highly nonlinear problems. In this paper, we compare the performance of the additive divided difference sigma-point filter to the extended Kalman filter when applied to orbit determination of a realistic operational scenario based on the Interstellar Boundary Explorer mission. For the scenario studied, both filters provided equivalent results. The performance of each is discussed in detail.

A 1.2-V 165-μW 0.29-mm² Multibit Sigma-Delta ADC for Hearing Aids Using Nonlinear DACs and With Over 91 dB Dynamic-Range

DEFF Research Database (Denmark)

Custódio, José R.; Goes, João; Paulino, Nuno

2013-01-01

This paper describes the design and experimental evaluation of a multibit Sigma-Delta (ΣΔ) modulator (ΣΔM) with enhanced dynamic range (DR) through the use of nonlinear digital-to-analog converters (DACs) in the feedback paths. This nonlinearity imposes a trade-off between DR and distortion, which...... in a 130 nm digital CMOS technology, which includes the proposed modulator with nonlinear DACs and a modulator with conventional linear DACs, for comparison purposes. The measured results show that the ΣΔM using nonlinear DACs achieves an enhancement of the DR around 8.4 dB (to 91.4 dB). Power dissipation...... and silicon area are about the same for the two cases. The performance achieved is comparable to that of the best reported multibit ΣΔ ADCs, with the advantage of occupying less silicon area (7.5 times lower area when compared with the most energy efficient ΣΔM)....

6 sigma quality performance

International Nuclear Information System (INIS)

Yu, Yeong Hak

2000-03-01

This deals with 6 sigma quality performance introducing company which has 6 sigma quality management, 6 sigma quality activity and customer, secret of success of 6 sigma quality management, what 6 sigma is, 6 sigma quality management propel system 5 propel steps of project like point of 6 sigma, flow of problem solution, tool for propel of project, performance of CTQ and total customer satisfaction, and quality management system and 6 sigma quality.

Topological sigma B model in 4-dimensions

International Nuclear Information System (INIS)

Jun, Hyun-Keun; Park, Jae-Suk

2008-01-01

We propose a 4-dimensional version of topological sigma B-model, governing maps from a smooth compact 4-manifold M to a Calabi-Yau target manifold X. The theory depends on complex structure of X, while is independent of Kaehler metric of X. The theory is also a 4-dimensional topological field theory in the sense that the theory is independent of variation of Riemannian metric of the source 4-manifold M, potentially leading to new smooth invariant of 4-manifolds. We argue that the theory also comes with a topological family parametrized by the extended moduli space of complex structures.

Superstring sigma models from spin chains: the SU(1,1 vertical bar 1) case

International Nuclear Information System (INIS)

Bellucci, S.; Casteill, P.-Y.; Morales, J.F.

2005-01-01

We derive the coherent state representation of the integrable spin chain Hamiltonian with non-compact supersymmetry group G=SU(1,1 vertical bar 1). By passing to the continuous limit, we find a spin chain sigma model describing a string moving on the supercoset G/H, H being the stabilizer group. The action is written in a manifestly G-invariant form in terms of the Cartan forms and the string coordinates in the supercoset. The spin chain sigma model is shown to agree with that following from the Green-Schwarz action describing two-charged string spinning on AdS 5 xS 5

Generalized Nonlinear Yule Models

OpenAIRE

Lansky, Petr; Polito, Federico; Sacerdote, Laura

2016-01-01

With the aim of considering models with persistent memory we propose a fractional nonlinear modification of the classical Yule model often studied in the context of macrovolution. Here the model is analyzed and interpreted in the framework of the development of networks such as the World Wide Web. Nonlinearity is introduced by replacing the linear birth process governing the growth of the in-links of each specific webpage with a fractional nonlinear birth process with completely general birth...

Nonlinear dynamical system identification using unscented Kalman filter

Science.gov (United States)

Rehman, M. Javvad ur; Dass, Sarat Chandra; Asirvadam, Vijanth Sagayan

2016-11-01

Kalman Filter is the most suitable choice for linear state space and Gaussian error distribution from decades. In general practical systems are not linear and Gaussian so these assumptions give inconsistent results. System Identification for nonlinear dynamical systems is a difficult task to perform. Usually, Extended Kalman Filter (EKF) is used to deal with non-linearity in which Jacobian method is used for linearizing the system dynamics, But it has been observed that in highly non-linear environment performance of EKF is poor. Unscented Kalman Filter (UKF) is proposed here as a better option because instead of analytical linearization of state space, UKF performs statistical linearization by using sigma point calculated from deterministic samples. Formation of the posterior distribution is based on the propagation of mean and covariance through sigma points.

Modeling nonlinearities in MEMS oscillators.

Science.gov (United States)

Agrawal, Deepak K; Woodhouse, Jim; Seshia, Ashwin A

2013-08-01

We present a mathematical model of a microelectromechanical system (MEMS) oscillator that integrates the nonlinearities of the MEMS resonator and the oscillator circuitry in a single numerical modeling environment. This is achieved by transforming the conventional nonlinear mechanical model into the electrical domain while simultaneously considering the prominent nonlinearities of the resonator. The proposed nonlinear electrical model is validated by comparing the simulated amplitude-frequency response with measurements on an open-loop electrically addressed flexural silicon MEMS resonator driven to large motional amplitudes. Next, the essential nonlinearities in the oscillator circuit are investigated and a mathematical model of a MEMS oscillator is proposed that integrates the nonlinearities of the resonator. The concept is illustrated for MEMS transimpedance-amplifier- based square-wave and sine-wave oscillators. Closed-form expressions of steady-state output power and output frequency are derived for both oscillator models and compared with experimental and simulation results, with a good match in the predicted trends in all three cases.

Phase-Field Modeling of Sigma-Phase Precipitation in 25Cr7Ni4Mo Duplex Stainless Steel

Science.gov (United States)

Malik, Amer; Odqvist, Joakim; Höglund, Lars; Hertzman, Staffan; Ågren, John

2017-10-01

Phase-field modeling is used to simulate the formation of sigma phase in a model alloy mimicking a commercial super duplex stainless steel (SDSS) alloy, in order to study precipitation and growth of sigma phase under linear continuous cooling. The so-called Warren-Boettinger-McFadden (WBM) model is used to build the basis of the multiphase and multicomponent phase-field model. The thermodynamic inconsistency at the multiple junctions associated with the multiphase formulation of the WBM model is resolved by means of a numerical Cut-off algorithm. To make realistic simulations, all the kinetic and the thermodynamic quantities are derived from the CALPHAD databases at each numerical time step, using Thermo-Calc and TQ-Interface. The credibility of the phase-field model is verified by comparing the results from the phase-field simulations with the corresponding DICTRA simulations and also with the empirical data. 2D phase-field simulations are performed for three different cooling rates in two different initial microstructures. A simple model for the nucleation of sigma phase is also implemented in the first case. Simulation results show that the precipitation of sigma phase is characterized by the accumulation of Cr and Mo at the austenite-ferrite and the ferrite-ferrite boundaries. Moreover, it is observed that a slow cooling rate promotes the growth of sigma phase, while a higher cooling rate restricts it, eventually preserving the duplex structure in the SDSS alloy. Results from the phase-field simulations are also compared quantitatively with the experiments, performed on a commercial 2507 SDSS alloy. It is found that overall, the predicted morphological features of the transformation and the composition profiles show good conformity with the empirical data.

Applying a Hybrid MCDM Model for Six Sigma Project Selection

Directory of Open Access Journals (Sweden)

Fu-Kwun Wang

2014-01-01

Full Text Available Six Sigma is a project-driven methodology; the projects that provide the maximum financial benefits and other impacts to the organization must be prioritized. Project selection (PS is a type of multiple criteria decision making (MCDM problem. In this study, we present a hybrid MCDM model combining the decision-making trial and evaluation laboratory (DEMATEL technique, analytic network process (ANP, and the VIKOR method to evaluate and improve Six Sigma projects for reducing performance gaps in each criterion and dimension. We consider the film printing industry of Taiwan as an empirical case. The results show that our study not only can use the best project selection, but can also be used to analyze the gaps between existing performance values and aspiration levels for improving the gaps in each dimension and criterion based on the influential network relation map.

The point of 6 sigma

International Nuclear Information System (INIS)

An, Yeong Jin

2000-07-01

This book gives descriptions of the point of 6 sigma. These are the titles of this : what 6 sigma is, sigma conception, motor roller 3.4 ppm, centering error, 6 sigma purpose, 6 sigma principle, eight steps of innovation strategy, 6 sigma innovation strategy of easy system step, measurement standard of 6 sigma outcome, the main role of 6 sigma, acknowledgment and reword, 6 sigma characteristic, 6 sigma effect, 6 sigma application and problems which happen when 6 sigma introduces.

Development of a Mathematical Model for Multivariate Process by Balanced Six Sigma

Directory of Open Access Journals (Sweden)

Díaz-Castellanos Elizabeth Eugenia

2015-07-01

Full Text Available The Six Sigma methodology is widely used in business to improve quality, increase productivity and lower costs, impacting on business improvement. However, today the challenge is to use those tools for improvements that will have a direct impact on the differentiation of value, which requires the alignment of Six Sigma with the competitive strategies of the organization.Hence the importance of a strategic management system to measure, analyze, improve and control corporate performance, while setting out responsibilities of leadership and commitment. The specific purpose of this research is to provide a mathematical model through the alignment of strategic objectives (Balanced Scorecard and tools for productivity improvement (Six Sigma for processes with multiple answers, which is sufficiently robust so that it can serve as basis for application in manufacturing and thus effectively link strategy performance and customer satisfaction. Specifically we worked with a case study: Córdoba, Ver. The model proposes that is the strategy, performance and customer satisfaction are aligned, the organization will benefit from the intense relationship between process performance and strategic initiatives. These changes can be measured by productivity and process metrics such as cycle time, production rates, production efficiency and percentage of reprocessing, among others.

Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

OpenAIRE

Alexandra Mirela Cristina MUNTEANU

2017-01-01

This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by...

Evaluation of nonlinearity and validity of nonlinear modeling for complex time series.

Science.gov (United States)

Suzuki, Tomoya; Ikeguchi, Tohru; Suzuki, Masuo

2007-10-01

Even if an original time series exhibits nonlinearity, it is not always effective to approximate the time series by a nonlinear model because such nonlinear models have high complexity from the viewpoint of information criteria. Therefore, we propose two measures to evaluate both the nonlinearity of a time series and validity of nonlinear modeling applied to it by nonlinear predictability and information criteria. Through numerical simulations, we confirm that the proposed measures effectively detect the nonlinearity of an observed time series and evaluate the validity of the nonlinear model. The measures are also robust against observational noises. We also analyze some real time series: the difference of the number of chickenpox and measles patients, the number of sunspots, five Japanese vowels, and the chaotic laser. We can confirm that the nonlinear model is effective for the Japanese vowel /a/, the difference of the number of measles patients, and the chaotic laser.

The algebras of higher order currents of the fermionic Gross-Neveu model

International Nuclear Information System (INIS)

Saltini, Luis Eduardo

1996-01-01

Results are reported from our studies on the following 2-dimensional field theories: the supersymmetric non-linear sigma model and the fermionic Gross-Neveu model. About the supersymmetric non-linear sigma model, an attempt is made to solve the the algebraic problem of finding the non-local conserved charges and the corresponding algebra, extending the methods described in a previous article for the case of the purely bosonic non linear sigma model. For the fermionic Gross-Neveu model, we intend to construct the conserved currents and the respective charges, related to the abelian U(1) symmetry and non-abelian SU(n) symmetry, at the conformal point and calculate the correlation functions between them. From these results at the conformal point, we want to study the effects of perturbation to get a massive but integral theory

Electromagnetic axial anomaly in a generalized linear sigma model

Science.gov (United States)

Fariborz, Amir H.; Jora, Renata

2017-06-01

We construct the electromagnetic anomaly effective term for a generalized linear sigma model with two chiral nonets, one with a quark-antiquark structure, the other one with a four-quark content. We compute in the leading order of this framework the decays into two photons of six pseudoscalars: π0(137 ), π0(1300 ), η (547 ), η (958 ), η (1295 ) and η (1760 ). Our results agree well with the available experimental data.

Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

Directory of Open Access Journals (Sweden)

Alexandra Mirela Cristina MUNTEANU

2017-06-01

Full Text Available This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by author in order to reveal Lean Six Sigma’s benefits.

Global Gauge Anomalies in Two-Dimensional Bosonic Sigma Models

Science.gov (United States)

Gawȩdzki, Krzysztof; Suszek, Rafał R.; Waldorf, Konrad

2011-03-01

We revisit the gauging of rigid symmetries in two-dimensional bosonic sigma models with a Wess-Zumino term in the action. Such a term is related to a background closed 3-form H on the target space. More exactly, the sigma-model Feynman amplitudes of classical fields are associated to a bundle gerbe with connection of curvature H over the target space. Under conditions that were unraveled more than twenty years ago, the classical amplitudes may be coupled to the topologically trivial gauge fields of the symmetry group in a way which assures infinitesimal gauge invariance. We show that the resulting gauged Wess-Zumino amplitudes may, nevertheless, exhibit global gauge anomalies that we fully classify. The general results are illustrated on the example of the WZW and the coset models of conformal field theory. The latter are shown to be inconsistent in the presence of global anomalies. We introduce a notion of equivariant gerbes that allow an anomaly-free coupling of the Wess-Zumino amplitudes to all gauge fields, including the ones in non-trivial principal bundles. Obstructions to the existence of equivariant gerbes and their classification are discussed. The choice of different equivariant structures on the same bundle gerbe gives rise to a new type of discrete-torsion ambiguities in the gauged amplitudes. An explicit construction of gerbes equivariant with respect to the adjoint symmetries over compact simply connected simple Lie groups is given.

Supersymmetric models for quarks and leptons with nonlinearly realized E8 symmetry

International Nuclear Information System (INIS)

Ong, C.L.

1985-01-01

We propose three supersymmetric nonlinear sigma models with global symmetry E 8 . The models can accommodate three left-handed families of quarks and leptons without incurring the Adler-Bell-Jackiw anomaly with respect to either the standard SU(3) x SU(2) x U(1) gauge group, or the SU(5), or SO(10) grand unifying gauge group. They also predict unambiguously a right-handed, fourth family of quarks and leptons. In order to explore the structure of the models, we develop a differential-form formulation of the Kahler manifolds, resulting in general expressions for the curvature tensors and other geometrical objects in terms of the structure constants of the algebra, and the squashing parameters. These results, in turn, facilitate a general method for determining the Lagrangian to quartic order, and so the structure of the inherent four-fermion interactions of the models. We observe that the Kahlerian condition dω = 0 on the fundamental two-form ω greatly reduces the number of the independent squashing parameters. We also point out two plausible mechanisms for symmetry breaking, involving gravity

2D sigma models and differential Poisson algebras

International Nuclear Information System (INIS)

Arias, Cesar; Boulanger, Nicolas; Sundell, Per; Torres-Gomez, Alexander

2015-01-01

We construct a two-dimensional topological sigma model whose target space is endowed with a Poisson algebra for differential forms. The model consists of an equal number of bosonic and fermionic fields of worldsheet form degrees zero and one. The action is built using exterior products and derivatives, without any reference to a worldsheet metric, and is of the covariant Hamiltonian form. The equations of motion define a universally Cartan integrable system. In addition to gauge symmetries, the model has one rigid nilpotent supersymmetry corresponding to the target space de Rham operator. The rigid and local symmetries of the action, respectively, are equivalent to the Poisson bracket being compatible with the de Rham operator and obeying graded Jacobi identities. We propose that perturbative quantization of the model yields a covariantized differential star product algebra of Kontsevich type. We comment on the resemblance to the topological A model.

Observation of the Heavy Baryons Sigma b and Sigma b*.

Science.gov (United States)

Aaltonen, T; Abulencia, A; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Aurisano, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Beauchemin, P-H; Bedeschi, F; Behari, S; Bellettini, G; Bellinger, J; Belloni, A; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Bizjak, I; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Buzatu, A; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carillo, S; Carlsmith, D; Carosi, R; Carron, S; Casal, B; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Cilijak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Compostella, G; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Crescioli, F; Cuenca Almenar, C; Cuevas, J; Culbertson, R; Cully, J C; DaRonco, S; Datta, M; D'Auria, S; Davies, T; Dagenhart, D; de Barbaro, P; De Cecco, S; Deisher, A; De Lentdecker, G; De Lorenzo, G; Dell'Orso, M; Delli Paoli, F; Demortier, L; Deng, J; Deninno, M; De Pedis, D; Derwent, P F; Di Giovanni, G P; Dionisi, C; Di Ruzza, B; Dittmann, J R; D'Onofrio, M; Dörr, C; Donati, S; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Field, R; Flanagan, G; Forrest, R; Forrester, S; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garcia, J E; Garberson, F; Garfinkel, A F; Gay, C; Gerberich, H; Gerdes, D; Giagu, S; Giannetti, P; Gibson, K; Gimmell, J L; Ginsburg, C; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Goldstein, J; Golossanov, A; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Grinstein, S; Grosso-Pilcher, C; Grundler, U; Guimaraes da Costa, J; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Hamilton, A; Han, B-Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, D; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hauser, J; Hays, C; Heck, M; Heijboer, A; Heinemann, B; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jeon, E J; Jindariani, S; Johnson, W; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kraan, A C; Kraus, J; Kreps, M; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhlmann, S E; Kuhr, T; Kulkarni, N P; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; LeCompte, T; Lee, J; Lee, J; Lee, Y J; Lee, S W; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Lu, R-S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; MacQueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Malik, S; Manca, G; Manousakis, A; Margaroli, F; Marginean, R; Marino, C; Marino, C P; Martin, A; Martin, M; Martin, V; Martínez, M; Martínez-Ballarín, R; Maruyama, T; Mastrandrea, P; Masubuchi, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; Miao, T; Miladinovic, N; Miles, J; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyamoto, A; Moed, S; Moggi, N; Mohr, B; Moon, C S; Moore, R; Morello, M; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Mussini, M; Nachtman, J; Nagano, A; Naganoma, J; Nakamura, K; Nakano, I; Napier, A; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nodulman, L; Norniella, O; Nurse, E; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagliarone, C; Palencia, E; Papadimitriou, V; Papaikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pinera, L; Pitts, K; Plager, C; Pondrom, L; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ramakrishnan, V; Ranjan, N; Redondo, I; Reisert, B; Rekovic, V; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Roy, P; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Safonov, A; Sakumoto, W K; Salamanna, G; Saltó, O; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M A; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfyrla, A; Shalhout, S Z; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakyan, A; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Spreitzer, T; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sun, H; Suslov, I; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Tesarek, R J; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuno, S; Tu, Y; Turini, N; Ukegawa, F; Uozumi, S; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vazquez, F; Velev, G; Vellidis, C; Veramendi, G; Veszpremi, V; Vidal, M; Vidal, R; Vila, I; Vilar, R; Vine, T; Vogel, M; Vollrath, I; Volobouev, I; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, J; Wagner, W; Wallny, R; Wang, S M; Warburton, A; Waters, D; Weinberger, M; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, T; Yang, C; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zhang, X; Zhou, J; Zucchelli, S

2007-11-16

We report an observation of new bottom baryons produced in pp collisions at the Tevatron. Using 1.1 fb(-1) of data collected by the CDF II detector, we observe four Lambda b 0 pi+/- resonances in the fully reconstructed decay mode Lambda b 0-->Lambda c + pi-, where Lambda c+-->pK* pi+. We interpret these states as the Sigma b(*)+/- baryons and measure the following masses: m Sigma b+=5807.8 -2.2 +2.0(stat.)+/-1.7(syst.) MeV/c2, m Sigma b- =5815.2+/-1.0(stat.)+/-1.7(syst.) MeV/c2, and m(Sigma b*)-m(Sigma b)=21.2-1.9 +2.0(stat.)-0.3+0.4(syst.) MeV/c2.

Nonlinear Modeling by Assembling Piecewise Linear Models

Science.gov (United States)

Yao, Weigang; Liou, Meng-Sing

2013-01-01

To preserve nonlinearity of a full order system over a parameters range of interest, we propose a simple modeling approach by assembling a set of piecewise local solutions, including the first-order Taylor series terms expanded about some sampling states. The work by Rewienski and White inspired our use of piecewise linear local solutions. The assembly of these local approximations is accomplished by assigning nonlinear weights, through radial basis functions in this study. The efficacy of the proposed procedure is validated for a two-dimensional airfoil moving at different Mach numbers and pitching motions, under which the flow exhibits prominent nonlinear behaviors. All results confirm that our nonlinear model is accurate and stable for predicting not only aerodynamic forces but also detailed flowfields. Moreover, the model is robustness-accurate for inputs considerably different from the base trajectory in form and magnitude. This modeling preserves nonlinearity of the problems considered in a rather simple and accurate manner.

Improved stability and performance from sigma-delta modulators using 1-bit vector quantization

DEFF Research Database (Denmark)

Risbo, Lars

1993-01-01

A novel class of sigma-delta modulators is presented. The usual scalar 1-b quantizer in a sigma-delta modulator is replaced by a 1-b vector quantizer with a N-dimensional input state-vector from the linear feedback filter. Generally, the vector quantizer changes the nonlinear dynamics...... of the modulator, and a proper choice of vector quantizer can improve both system stability and coding performance. It is shown how to construct the vector quantizer in order to limit the excursions in state-space. The proposed method is demonstrated graphically for a simple second-order modulator...

Adaptive regression for modeling nonlinear relationships

CERN Document Server

Knafl, George J

2016-01-01

This book presents methods for investigating whether relationships are linear or nonlinear and for adaptively fitting appropriate models when they are nonlinear. Data analysts will learn how to incorporate nonlinearity in one or more predictor variables into regression models for different types of outcome variables. Such nonlinear dependence is often not considered in applied research, yet nonlinear relationships are common and so need to be addressed. A standard linear analysis can produce misleading conclusions, while a nonlinear analysis can provide novel insights into data, not otherwise possible. A variety of examples of the benefits of modeling nonlinear relationships are presented throughout the book. Methods are covered using what are called fractional polynomials based on real-valued power transformations of primary predictor variables combined with model selection based on likelihood cross-validation. The book covers how to formulate and conduct such adaptive fractional polynomial modeling in the s...

Inference of sigma factor controlled networks by using numerical modeling applied to microarray time series data of the germinating prokaryote.

Science.gov (United States)

Strakova, Eva; Zikova, Alice; Vohradsky, Jiri

2014-01-01

A computational model of gene expression was applied to a novel test set of microarray time series measurements to reveal regulatory interactions between transcriptional regulators represented by 45 sigma factors and the genes expressed during germination of a prokaryote Streptomyces coelicolor. Using microarrays, the first 5.5 h of the process was recorded in 13 time points, which provided a database of gene expression time series on genome-wide scale. The computational modeling of the kinetic relations between the sigma factors, individual genes and genes clustered according to the similarity of their expression kinetics identified kinetically plausible sigma factor-controlled networks. Using genome sequence annotations, functional groups of genes that were predominantly controlled by specific sigma factors were identified. Using external binding data complementing the modeling approach, specific genes involved in the control of the studied process were identified and their function suggested.

Beta functions and central charge of supersymmetric sigma models with torsion

International Nuclear Information System (INIS)

Guadagnini, E.; Mintchev, M.

1987-01-01

We present a method for the computation of the renormalization group β-functions and the central charge in two-dimensional supersymmetric sigma models in a gravitational background. The two-loops results are exhibited. We use the Pauli-Villars regularization which preserves supersymmetry and permits an unambiguous treatment of the model with torsion. The central charge we derive for a general manifold is in agreement with the expression found on group manifolds. (orig.)

Nonlinear modelling of polymer electrolyte membrane fuel cell stack using nonlinear cancellation technique

Energy Technology Data Exchange (ETDEWEB)

Barus, R. P. P., E-mail: rismawan.ppb@gmail.com [Engineering Physics, Faculty of Industrial Technology, Institut Teknologi Bandung, Jalan Ganesa 10 Bandung and Centre for Material and Technical Product, Jalan Sangkuriang No. 14 Bandung (Indonesia); Tjokronegoro, H. A.; Leksono, E. [Engineering Physics, Faculty of Industrial Technology, Institut Teknologi Bandung, Jalan Ganesa 10 Bandung (Indonesia); Ismunandar [Chemistry Study, Faculty of Mathematics and Science, Institut Teknologi Bandung, Jalan Ganesa 10 Bandung (Indonesia)

2014-09-25

Fuel cells are promising new energy conversion devices that are friendly to the environment. A set of control systems are required in order to operate a fuel cell based power plant system optimally. For the purpose of control system design, an accurate fuel cell stack model in describing the dynamics of the real system is needed. Currently, linear model are widely used for fuel cell stack control purposes, but it has limitations in narrow operation range. While nonlinear models lead to nonlinear control implemnetation whos more complex and hard computing. In this research, nonlinear cancellation technique will be used to transform a nonlinear model into a linear form while maintaining the nonlinear characteristics. The transformation is done by replacing the input of the original model by a certain virtual input that has nonlinear relationship with the original input. Then the equality of the two models is tested by running a series of simulation. Input variation of H2, O2 and H2O as well as disturbance input I (current load) are studied by simulation. The error of comparison between the proposed model and the original nonlinear model are less than 1 %. Thus we can conclude that nonlinear cancellation technique can be used to represent fuel cell nonlinear model in a simple linear form while maintaining the nonlinear characteristics and therefore retain the wide operation range.

Nonlinear modelling of polymer electrolyte membrane fuel cell stack using nonlinear cancellation technique

International Nuclear Information System (INIS)

Barus, R. P. P.; Tjokronegoro, H. A.; Leksono, E.; Ismunandar

2014-01-01

Fuel cells are promising new energy conversion devices that are friendly to the environment. A set of control systems are required in order to operate a fuel cell based power plant system optimally. For the purpose of control system design, an accurate fuel cell stack model in describing the dynamics of the real system is needed. Currently, linear model are widely used for fuel cell stack control purposes, but it has limitations in narrow operation range. While nonlinear models lead to nonlinear control implemnetation whos more complex and hard computing. In this research, nonlinear cancellation technique will be used to transform a nonlinear model into a linear form while maintaining the nonlinear characteristics. The transformation is done by replacing the input of the original model by a certain virtual input that has nonlinear relationship with the original input. Then the equality of the two models is tested by running a series of simulation. Input variation of H2, O2 and H2O as well as disturbance input I (current load) are studied by simulation. The error of comparison between the proposed model and the original nonlinear model are less than 1 %. Thus we can conclude that nonlinear cancellation technique can be used to represent fuel cell nonlinear model in a simple linear form while maintaining the nonlinear characteristics and therefore retain the wide operation range

Superfield Lax formalism of supersymmetric sigma model on symmetric spaces

International Nuclear Information System (INIS)

Saleem, U.; Hassan, M.

2006-01-01

We present a superfield Lax formalism of the superspace sigma model based on the target space G/H and show that a one-parameter family of flat superfield connections exists if the target space G/H is a symmetric space. The formalism has been related to the existence of an infinite family of local and non-local superfield conserved quantities. A few examples have been given to illustrate the results. (orig.)

On the chiral phase transition in the linear sigma model

International Nuclear Information System (INIS)

Tran Huu Phat; Nguyen Tuan Anh; Le Viet Hoa

2003-01-01

The Cornwall- Jackiw-Tomboulis (CJT) effective action for composite operators at finite temperature is used to investigate the chiral phase transition within the framework of the linear sigma model as the low-energy effective model of quantum chromodynamics (QCD). A new renormalization prescription for the CJT effective action in the Hartree-Fock (HF) approximation is proposed. A numerical study, which incorporates both thermal and quantum effect, shows that in this approximation the phase transition is of first order. However, taking into account the higher-loop diagrams contribution the order of phase transition is unchanged. (author)

The gauge-invariant N=2 supersymmetric sigma-model with general scalar potential

International Nuclear Information System (INIS)

Sierra, G.; Townsend, P.K.

1984-01-01

We construct the supersymmetric sigma-model, in six dimensions, for an arbitrary hyper-Kaehler manifold, and its minimal coupling to super-Yang-Mills theory. Non-trivial reduction to five or four dimensions yields the corresponding five- or four-dimensional N=2 supersymmetric model with general scalar potential. We discuss briefly the coupling to supergravity in six dimensions and we give the on-shell supergravity torsion constraints. (orig.)

SIGMA without effort

International Nuclear Information System (INIS)

Hagedorn, R.; Reinfelds, J.

1978-01-01

SIGMA (System for Interactive Graphical Analysis) is an interactive computing language with automatic array handling and graphical facilities. It is designed as a tool for mathematical problem solving. The SIGMA language is simple, almost obvious, yet flexible and powerful. This tutorial introduces the beginner to SIGMA. It is supposed to be used at a graphics terminal having access to SIGMA. The user will learn the language in dialogue with the system in sixteen sessions of about one hour. The first session enables him already to compute and display functions of one or two variables. (Auth.)

Conformally parametrized surfaces associated with CPN-1 sigma models

International Nuclear Information System (INIS)

Grundland, A M; Hereman, W A; Yurdusen, I-dot

2008-01-01

Two-dimensional parametrized surfaces immersed in the su(N) algebra are investigated. The focus is on surfaces parametrized by solutions of the equations for the CP N-1 sigma model. The Lie-point symmetries of the CP N-1 model are computed for arbitrary N. The Weierstrass formula for immersion is determined and an explicit formula for a moving frame on a surface is constructed. This allows us to determine the structural equations and geometrical properties of surfaces in R N 2 -1 . The fundamental forms, Gaussian and mean curvatures, Willmore functional and topological charge of surfaces are given explicitly in terms of any holomorphic solution of the CP 2 model. The approach is illustrated through several examples, including surfaces immersed in low-dimensional su(N) algebras

A healthcare Lean Six Sigma System for postanesthesia care unit workflow improvement.

Science.gov (United States)

Kuo, Alex Mu-Hsing; Borycki, Elizabeth; Kushniruk, Andre; Lee, Te-Shu

2011-01-01

The aim of this article is to propose a new model called Healthcare Lean Six Sigma System that integrates Lean and Six Sigma methodologies to improve workflow in a postanesthesia care unit. The methodology of the proposed model is fully described. A postanesthesia care unit case study is also used to demonstrate the benefits of using the Healthcare Lean Six Sigma System model by combining Lean and Six Sigma methodologies together. The new model bridges the service gaps between health care providers and patients, balances the requirements of health care managers, and delivers health care services to patients by taking the benefits of the Lean speed and Six Sigma high-quality principles. The full benefits of the new model will be realized when applied at both strategic and operational levels. For further research, we will examine how the proposed model is used in different real-world case studies.

A behavioral simulator for switched-capacitor sigma-delta modulator analog-to-digital converter

International Nuclear Information System (INIS)

San, H. Y.; Rezaul Hasan, S. M.

1998-01-01

In this paper, a PC-based simulator for state of the art oversampled switched-capacitor sigma-delta analog-to-digital converters is presented. The proposed simulator employs behavioral model of switched-capacitor integrator and non-linear quantizer to stimulate the system. The behavioral simulation of the integrator is also verified with SPICE. The simulator is fully integrated and standalone. It integrates an input netlist file interpreter, a behavioral simulator, a generic part library and a powerful post-processor to evaluate the SNR, SDR And TSNR. Both passive and active sensitivities can be investigated by the proposed simulator. The simulator is coded in C++, and is very fast

Sigma A recognition sites in the Bacillus subtilis genome

DEFF Research Database (Denmark)

Jarmer, Hanne Østergaard; Larsen, Thomas Schou; Krogh, Anders Stærmose

2001-01-01

A hidden Markov model of sigma (A) RNA polymerase cofactor recognition sites in Bacillus subtilis, containing either the common or the extended -10 motifs, has been constructed based on experimentally verified sigma (A) recognition sites. This work suggests that more information exists...... at the initiation site of transcription in both types of promoters than previously thought. When tested on the entire B. subtilis genome, the model predicts that approximately half of the sigma (A) recognition sites are of the extended type. Some of the response-regulator aspartate phosphatases were among...

Generalized Nonlinear Yule Models

Science.gov (United States)

Lansky, Petr; Polito, Federico; Sacerdote, Laura

2016-11-01

With the aim of considering models related to random graphs growth exhibiting persistent memory, we propose a fractional nonlinear modification of the classical Yule model often studied in the context of macroevolution. Here the model is analyzed and interpreted in the framework of the development of networks such as the World Wide Web. Nonlinearity is introduced by replacing the linear birth process governing the growth of the in-links of each specific webpage with a fractional nonlinear birth process with completely general birth rates. Among the main results we derive the explicit distribution of the number of in-links of a webpage chosen uniformly at random recognizing the contribution to the asymptotics and the finite time correction. The mean value of the latter distribution is also calculated explicitly in the most general case. Furthermore, in order to show the usefulness of our results, we particularize them in the case of specific birth rates giving rise to a saturating behaviour, a property that is often observed in nature. The further specialization to the non-fractional case allows us to extend the Yule model accounting for a nonlinear growth.

The sigma model on complex projective superspaces

Energy Technology Data Exchange (ETDEWEB)

Candu, Constantin; Mitev, Vladimir; Schomerus, Volker [DESY, Hamburg (Germany). Theory Group; Quella, Thomas [Amsterdam Univ. (Netherlands). Inst. for Theoretical Physics; Saleur, Hubert [CEA Saclay, 91 - Gif-sur-Yvette (France). Inst. de Physique Theorique; USC, Los Angeles, CA (United States). Physics Dept.

2009-08-15

The sigma model on projective superspaces CP{sup S-1} {sup vertical} {sup stroke} {sup S} gives rise to a continuous family of interacting 2D conformal field theories which are parametrized by the curvature radius R and the theta angle {theta}. Our main goal is to determine the spectrum of the model, non-perturbatively as a function of both parameters. We succeed to do so for all open boundary conditions preserving the full global symmetry of the model. In string theory parlor, these correspond to volume filling branes that are equipped with a monopole line bundle and connection. The paper consists of two parts. In the first part, we approach the problem within the continuum formulation. Combining combinatorial arguments with perturbative studies and some simple free field calculations, we determine a closed formula for the partition function of the theory. This is then tested numerically in the second part. There we propose a spin chain regularization of the CP{sup S-1} {sup vertical} {sup stroke} {sup S} model with open boundary conditions and use it to determine the spectrum at the conformal fixed point. The numerical results are in remarkable agreement with the continuum analysis. (orig.)

The sigma model on complex projective superspaces

International Nuclear Information System (INIS)

Candu, Constantin; Mitev, Vladimir; Schomerus, Volker; Quella, Thomas; Saleur, Hubert; USC, Los Angeles, CA

2009-08-01

The sigma model on projective superspaces CP S-1 vertical stroke S gives rise to a continuous family of interacting 2D conformal field theories which are parametrized by the curvature radius R and the theta angle θ. Our main goal is to determine the spectrum of the model, non-perturbatively as a function of both parameters. We succeed to do so for all open boundary conditions preserving the full global symmetry of the model. In string theory parlor, these correspond to volume filling branes that are equipped with a monopole line bundle and connection. The paper consists of two parts. In the first part, we approach the problem within the continuum formulation. Combining combinatorial arguments with perturbative studies and some simple free field calculations, we determine a closed formula for the partition function of the theory. This is then tested numerically in the second part. There we propose a spin chain regularization of the CP S-1 vertical stroke S model with open boundary conditions and use it to determine the spectrum at the conformal fixed point. The numerical results are in remarkable agreement with the continuum analysis. (orig.)

Kinks, chains, and loop groups in the CPn sigma models

International Nuclear Information System (INIS)

Harland, Derek

2009-01-01

We consider topological solitons in the CP n sigma models in two space dimensions. In particular, we study 'kinks', which are independent of one coordinate up to a rotation of the target space, and 'chains', which are periodic in one coordinate up to a rotation of the target space. Kinks and chains both exhibit constituents, similar to monopoles and calorons in SU(n) Yang-Mills-Higgs and Yang-Mills theories. We examine the constituent structure using Lie algebras.

All (4,1): Sigma models with (4,q) off-shell supersymmetry

Energy Technology Data Exchange (ETDEWEB)

Hull, Chris [The Blackett Laboratory, Imperial College London,Prince Consort Road London SW7 @AZ (United Kingdom); Lindström, Ulf [The Blackett Laboratory, Imperial College London,Prince Consort Road London SW7 @AZ (United Kingdom); Department of Physics and Astronomy, Division of Theoretical Physics,Uppsala University, Box 516, SE-751 20 Uppsala (Sweden)

2017-03-08

Off-shell (4,q) supermultiplets in 2-dimensions are constructed for q=1,2,4. These are used to construct sigma models whose target spaces are hyperkähler with torsion. The off-shell supersymmetry implies the three complex structures are simultaneously integrable and allows us to construct actions using extended superspace and projective superspace, giving an explicit construction of the target space geometries.

Gamma ray spectrum analysis code: sigmas 1.0

International Nuclear Information System (INIS)

Siangsanan, P.; Dharmavanij, W.; Chongkum, S.

1996-01-01

We have developed Sigmas 1.0 a software package for data reduction and gamma ray spectra evaluation. It is capable of analysing the gamma-ray spectrum in the range of 0-3 MeV by semiconductor detector, i.e. Ge(Li) or HPGe, peak searching, net area determining, plotting and spectrum displaying. There are two methods for calculating the net area under peaks; the Covell method and non-linear fitting by the method of Levenberg and Marquardt which can fit any multiplet peak in the spectrum. The graphic display was rather fast and user friendly

N=3 and N=4 superconformal WZNW sigma models in superspace. Part 1

International Nuclear Information System (INIS)

Ivanov, E.A.; Krivonos, S.O.

1989-01-01

A manifestly invariant superfield description of N=3 and N=4 2D superconformal WZNW sigma models with U(1)xO(3) and U(1)xUO(4) as the bosonic target manifolds. We construct the N=3 superspace formulation of the U(1)xO(3) model. The self-contained definition of N=3 supercurrent via the basic U(1)xO(3) model. 23 refs

Nonlinear behaviour of cantilevered carbon nanotube resonators based on a new nonlinear electrostatic load model

Science.gov (United States)

Farokhi, Hamed; Païdoussis, Michael P.; Misra, Arun K.

2018-04-01

The present study examines the nonlinear behaviour of a cantilevered carbon nanotube (CNT) resonator and its mass detection sensitivity, employing a new nonlinear electrostatic load model. More specifically, a 3D finite element model is developed in order to obtain the electrostatic load distribution on cantilevered CNT resonators. A new nonlinear electrostatic load model is then proposed accounting for the end effects due to finite length. Additionally, a new nonlinear size-dependent continuum model is developed for the cantilevered CNT resonator, employing the modified couple stress theory (to account for size-effects) together with the Kelvin-Voigt model (to account for nonlinear damping); the size-dependent model takes into account all sources of nonlinearity, i.e. geometrical and inertial nonlinearities as well as nonlinearities associated with damping, small-scale, and electrostatic load. The nonlinear equation of motion of the cantilevered CNT resonator is obtained based on the new models developed for the CNT resonator and the electrostatic load. The Galerkin method is then applied to the nonlinear equation of motion, resulting in a set of nonlinear ordinary differential equations, consisting of geometrical, inertial, electrical, damping, and size-dependent nonlinear terms. This high-dimensional nonlinear discretized model is solved numerically utilizing the pseudo-arclength continuation technique. The nonlinear static and dynamic responses of the system are examined for various cases, investigating the effect of DC and AC voltages, length-scale parameter, nonlinear damping, and electrostatic load. Moreover, the mass detection sensitivity of the system is examined for possible application of the CNT resonator as a nanosensor.

Solution of the equations of motion for a super non-Abelian sigma model in curved background by the super Poisson-Lie T-duality

International Nuclear Information System (INIS)

Eghbali, Ali

2015-01-01

The equations of motion of a super non-Abelian T-dual sigma model on the Lie supergroup (C_1"1+A) in the curved background are explicitly solved by the super Poisson-Lie T-duality. To find the solution of the flat model we use the transformation of supercoordinates, transforming the metric into a constant one, which is shown to be a supercanonical transformation. Then, using the super Poisson-Lie T-duality transformations and the dual decomposition of elements of Drinfel’d superdouble, the solution of the equations of motion for the dual sigma model is obtained. The general form of the dilaton fields satisfying the vanishing β−function equations of the sigma models is found. In this respect, conformal invariance of the sigma models built on the Drinfel’d superdouble ((C_1"1+A) , I_(_2_|_2_)) is guaranteed up to one-loop, at least.

How the early sporulation sigma factor sigmaF delays the switch to late development in Bacillus subtilis.

Science.gov (United States)

Karmazyn-Campelli, Céline; Rhayat, Lamya; Carballido-López, Rut; Duperrier, Sandra; Frandsen, Niels; Stragier, Patrick

2008-03-01

Sporulation in Bacillus subtilis is a primitive differentiation process involving two cell types, the forespore and the mother cell. Each cell implements two successive transcription programmes controlled by specific sigma factors. We report that activity of sigma(G), the late forespore sigma factor, is kept in check by Gin, the product of csfB, a gene controlled by sigma(F), the early forespore sigma factor. Gin abolishes sigma(G) transcriptional activity when sigma(G) is artificially synthesized during growth, but has no effect on sigma(F). Gin interacts strongly with sigma(G) but not with sigma(F) in a yeast two-hybrid experiment. The absence of Gin allows sigma(G) to be active during sporulation independently of the mother-cell development to which it is normally coupled. Premature sigma(G) activity leads to the formation of slow-germinating spores, and complete deregulation of sigma(G) synthesis is lethal when combined with gin inactivation. Gin allows sigma(F) to delay the switch to the late forespore transcription programme by preventing sigma(G) to take over before the cell has reached a critical stage of development. A similar strategy, following a completely unrelated route, is used by the mother cell.

Nonlinear models for autoregressive conditional heteroskedasticity

DEFF Research Database (Denmark)

Teräsvirta, Timo

This paper contains a brief survey of nonlinear models of autore- gressive conditional heteroskedasticity. The models in question are parametric nonlinear extensions of the original model by Engle (1982). After presenting the individual models, linearity testing and parameter estimation are discu...

Study of the reactions $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda , \\bar{\\Lambda} \\Sigma^{0}$ or $\\bar{\\Sigma^{0}} \\Lambda , \\bar{\\Sigma^{+}} \\Sigma^{+}$ at 3.6 GeV/c

CERN Document Server

Atherton, Henry W; Moebes, J P; Quercigh, Emanuele

1974-01-01

The reactions $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda , \\bar{\\Lambda} \\Sigma^{0}$ or $\\bar{\\Sigma^{0}} \\Lambda , \\bar{\\Sigma^{+}} \\Sigma^{+}$ are studied at an incident momentum of 3.6 GeV/c in a 35.4 event/$\\mu$ b experiment performed in the CERN 2m HBC. Total and differential cross sections are presented. The polarization of the hyperons is measured as a function of $t$ and for the reaction $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda$ the complete spin correlation matrix is given. (23 refs).

Mathematical modeling and applications in nonlinear dynamics

CERN Document Server

Merdan, Hüseyin

2016-01-01

The book covers nonlinear physical problems and mathematical modeling, including molecular biology, genetics, neurosciences, artificial intelligence with classical problems in mechanics and astronomy and physics. The chapters present nonlinear mathematical modeling in life science and physics through nonlinear differential equations, nonlinear discrete equations and hybrid equations. Such modeling can be effectively applied to the wide spectrum of nonlinear physical problems, including the KAM (Kolmogorov-Arnold-Moser (KAM)) theory, singular differential equations, impulsive dichotomous linear systems, analytical bifurcation trees of periodic motions, and almost or pseudo- almost periodic solutions in nonlinear dynamical systems. Provides methods for mathematical models with switching, thresholds, and impulses, each of particular importance for discontinuous processes Includes qualitative analysis of behaviors on Tumor-Immune Systems and methods of analysis for DNA, neural networks and epidemiology Introduces...

From spiking neuron models to linear-nonlinear models.

Science.gov (United States)

Ostojic, Srdjan; Brunel, Nicolas

2011-01-20

Neurons transform time-varying inputs into action potentials emitted stochastically at a time dependent rate. The mapping from current input to output firing rate is often represented with the help of phenomenological models such as the linear-nonlinear (LN) cascade, in which the output firing rate is estimated by applying to the input successively a linear temporal filter and a static non-linear transformation. These simplified models leave out the biophysical details of action potential generation. It is not a priori clear to which extent the input-output mapping of biophysically more realistic, spiking neuron models can be reduced to a simple linear-nonlinear cascade. Here we investigate this question for the leaky integrate-and-fire (LIF), exponential integrate-and-fire (EIF) and conductance-based Wang-Buzsáki models in presence of background synaptic activity. We exploit available analytic results for these models to determine the corresponding linear filter and static non-linearity in a parameter-free form. We show that the obtained functions are identical to the linear filter and static non-linearity determined using standard reverse correlation analysis. We then quantitatively compare the output of the corresponding linear-nonlinear cascade with numerical simulations of spiking neurons, systematically varying the parameters of input signal and background noise. We find that the LN cascade provides accurate estimates of the firing rates of spiking neurons in most of parameter space. For the EIF and Wang-Buzsáki models, we show that the LN cascade can be reduced to a firing rate model, the timescale of which we determine analytically. Finally we introduce an adaptive timescale rate model in which the timescale of the linear filter depends on the instantaneous firing rate. This model leads to highly accurate estimates of instantaneous firing rates.

Finite element model for nonlinear shells of revolution

International Nuclear Information System (INIS)

Cook, W.A.

1979-01-01

Nuclear material shipping containers have shells of revolution as basic structural components. Analytically modeling the response of these containers to severe accident impact conditions requires a nonlinear shell-of-revolution model that accounts for both geometric and material nonlinearities. Existing models are limited to large displacements, small rotations, and nonlinear materials. The paper presents a finite element model for a nonlinear shell of revolution that will account for large displacements, large strains, large rotations, and nonlinear materials

The SIGMA plants economic behavior

International Nuclear Information System (INIS)

Rivarola, Martin E.; Bergallo, Juan E.

1999-01-01

In this work, the economical behavior of the Uranium Enrichment Plants, built using the Gaseous Isotopic Separation using Advanced Methods (SIGMA) (Separacion Isotopica Gaseosa por Metodos Avanzados) technology is analyzed. The calculations were made using an integrated computer code, where the cost of each main component of the plant is estimated. The program computes the production cost for several configurations of enrichment cascades, each one corresponding to a production rate. The program also includes a numerical optimizer and it seeks the SIGMA optimal configuration for a given set of design parameters. The present work does not contemplate the model and calculation of the auxiliary system costs. The total amortization cost is obtained by using the cascade capital cost and assuming that the auxiliary system represents a fixed part of the total cost.The results obtained show that the SIGMA technology for Enrichment Uranium Plants could achieve economical competition in a much lower production scale than the conventional Gaseous Diffusion Enrichment Plants. (author)

Quality and Competitiveness: A Lean Six Sigma Approach

Directory of Open Access Journals (Sweden)

Irina-Virginia Drăgulănescu

2015-11-01

Full Text Available Originally developed to improve the quality and production efficiency, Lean Six Sigma is now widely adopted in other non-manufacturing sectors such as financial, trade, services, etc. The methodology known as Lean Six Sigma combines the Six Sigma techniques, ‒ which allow companies to reduce manufacturing defects ‒ and the Lean Manufacturing principles, ‒ which help companies benefit from faster processing for lower costs and with superior quality. As a result of the research, the authors observed that, despite growing popularity and impressive outcomes obtained by some companies, the Lean Six Sigma model does not always offer the expected results. However, the research has shown that the analysed company, operating in the field of courier services has managed to boost productivity and competitiveness by implementing measures that generated added value.

Sigma-model formulation of the Yang-Mills theory on four-dimensional hypersphere

International Nuclear Information System (INIS)

Ivanov, E.A.; Krivonos, S.O.

1981-01-01

The bilocal sigma-model representation is constructed for the Yang-Mills theory in the simplest conformally flat hyperspherical spaces So(1,4)/SO(1,3), SO(2,3)/SO(1,3) and SO(5)/SO(4). Like in the case of Minkowski and Euclidean spaces, Yang-Mills potential is defined as bsub(μ)(x)=dsub(μ)sup(y)b(x,y)|y=0 , b(x,y) being a bilocal Goldstone field which takes values in the gauge group algebra and is subjected to certain covariant constraints. The minimal version of these constraints results in the ''string'' representation for b(x,y) through the P-exponential of bsub(μ)(x) along the fixed paths coinciding with geodesics. Due to the presence of closed geodesics, the contour fuctionals naturally appear in the theory, with contours being the circles with the hypersphere radius. The sigma-model representation is shown to be Weyl-covariant: its formulations indifferent conformally flat spaces are related by transformations of ysup(rho). The geometric meaning of ysup(rho) and minimal constraints is explained, and the conformal group gransformation for ysup(rho) is found [ru

Sigma-model formulation of the Yang-Mills theory on four-dimensional hypersphere

International Nuclear Information System (INIS)

Ivanov, E.A.; Krivonos, S.O.

1983-01-01

The bilocal sigma-model representation is constructed for Yang-Mills theory in the simplest conformally flat hyperspherical spases SO(1, 4)/SO(1, 3), SO(2, 3)/SO(1, 3) and SO(5)/SO(4) (for the Euclidean Yang-Mills). Like in the case of Minkowski and Euclidean spaces, Yang-Mills potential is defined as bsub(μ)(x)=dsub(μ)sup(y)b(x, y)sub(y=0), b(x, y) being a bilocal Goldstone field which takes values in the gauge group algebra and is subjected to certain covariant constraints. The minimal version of these constraints results in the ''string'' representation for b(x, y) through the P exponential of bsub(μ)(x) along the fixed paths coinciding with geodesics. Due to the presence of closed geodesics, the contour functional naturally appear in the theory, with contours being the circles with the hypersphere radius. The sigma-model representation is shown to be Weyl-covariant: its formulations in different conformally flat spaces are related by transformations of ysup(rho). The geometric meaning ysup(rho) and minimal constraints is explained, and the conformal group transofrmation of ysup(rho) is found

Performance specifications and six sigma theory: Clinical chemistry and industry compared.

Science.gov (United States)

Oosterhuis, W P; Severens, M J M J

2018-04-11

Analytical performance specifications are crucial in test development and quality control. Although consensus has been reached on the use of biological variation to derive these specifications, no consensus has been reached which model should be preferred. The Six Sigma concept is widely applied in industry for quality specifications of products and can well be compared with Six Sigma models in clinical chemistry. However, the models for measurement specifications differ considerably between both fields: where the sigma metric is used in clinical chemistry, in industry the Number of Distinct Categories is used instead. In this study the models in both fields are compared and discussed. Copyright © 2018. Published by Elsevier Inc.

Twisted sigma-model solitons on the quantum projective line

Science.gov (United States)

Landi, Giovanni

2018-04-01

On the configuration space of projections in a noncommutative algebra, and for an automorphism of the algebra, we use a twisted Hochschild cocycle for an action functional and a twisted cyclic cocycle for a topological term. The latter is Hochschild-cohomologous to the former and positivity in twisted Hochschild cohomology results into a lower bound for the action functional. While the equations for the critical points are rather involved, the use of the positivity and the bound by the topological term lead to self-duality equations (thus yielding twisted noncommutative sigma-model solitons, or instantons). We present explicit nontrivial solutions on the quantum projective line.

Interaction of sigma factor sigmaN with Escherichia coli RNA polymerase core enzyme.

Science.gov (United States)

Scott, D J; Ferguson, A L; Gallegos, M T; Pitt, M; Buck, M; Hoggett, J G

2000-12-01

The equilibrium binding and kinetics of assembly of the DNA-dependent RNA polymerase (RNAP) sigma(N)-holoenzyme has been investigated using biosynthetically labelled 7-azatryptophyl- (7AW)sigma(N). The spectroscopic properties of such 7AW proteins allows their absorbance and fluorescence to be monitored selectively, even in the presence of high concentrations of other tryptophan-containing proteins. The 7AWsigma(N) retained its biological activity in stimulating transcription from sigma(N)-specific promoters, and in in vitro gel electrophoresis assays of binding to core RNAP from Escherichia coli. Furthermore, five Trp-->Ala single mutants of sigma(N) were shown to support growth under conditions of nitrogen limitation, and showed comparable efficiency in activating the sigma(N)-dependent nifH promoter in vivo, indicating that none of the tryptophan residues were essential for activity. The equilibrium binding of 7AWsigma(N) to core RNAP was examined by analytical ultracentrifugation. In sedimentation equilibrium experiments, absorbance data at 315 nm (which reports selectively on the distribution of free and bound 7AWsigma(N)) established that a 1:1 complex was formed, with a dissociation constant lower than 2 microM. The kinetics of the interaction between 7AWsigma(N) and core RNAP was investigated using stopped-flow spectrofluorimetry. A biphasic decrease in fluorescence intensity was observed when samples were excited at 280 nm, whereas only the slower of the two phases was observed at 315 nm. The kinetic data were analysed in terms of a mechanism in which a fast bimolecular association of sigma(N) with core RNAP is followed by a relatively slow isomerization step. The consequences of these findings on the competition between sigma(N) and the major sigma factor, sigma(70), in Escherichia coli are discussed.

Forecasting with nonlinear time series models

DEFF Research Database (Denmark)

Kock, Anders Bredahl; Teräsvirta, Timo

In this paper, nonlinear models are restricted to mean nonlinear parametric models. Several such models popular in time series econo- metrics are presented and some of their properties discussed. This in- cludes two models based on universal approximators: the Kolmogorov- Gabor polynomial model...... applied to economic fore- casting problems, is briefly highlighted. A number of large published studies comparing macroeconomic forecasts obtained using different time series models are discussed, and the paper also contains a small simulation study comparing recursive and direct forecasts in a partic...... and two versions of a simple artificial neural network model. Techniques for generating multi-period forecasts from nonlinear models recursively are considered, and the direct (non-recursive) method for this purpose is mentioned as well. Forecasting with com- plex dynamic systems, albeit less frequently...

Fuzzy model-based servo and model following control for nonlinear systems.

Science.gov (United States)

Ohtake, Hiroshi; Tanaka, Kazuo; Wang, Hua O

2009-12-01

This correspondence presents servo and nonlinear model following controls for a class of nonlinear systems using the Takagi-Sugeno fuzzy model-based control approach. First, the construction method of the augmented fuzzy system for continuous-time nonlinear systems is proposed by differentiating the original nonlinear system. Second, the dynamic fuzzy servo controller and the dynamic fuzzy model following controller, which can make outputs of the nonlinear system converge to target points and to outputs of the reference system, respectively, are introduced. Finally, the servo and model following controller design conditions are given in terms of linear matrix inequalities. Design examples illustrate the utility of this approach.

Identification of nonlinear anelastic models

International Nuclear Information System (INIS)

Draganescu, G E; Bereteu, L; Ercuta, A

2008-01-01

A useful nonlinear identification technique applied to the anelastic and rheologic models is presented in this paper. First introduced by Feldman, the method is based on the Hilbert transform, and is currently used for identification of the nonlinear vibrations

Physics constrained nonlinear regression models for time series

International Nuclear Information System (INIS)

Majda, Andrew J; Harlim, John

2013-01-01

A central issue in contemporary science is the development of data driven statistical nonlinear dynamical models for time series of partial observations of nature or a complex physical model. It has been established recently that ad hoc quadratic multi-level regression (MLR) models can have finite-time blow up of statistical solutions and/or pathological behaviour of their invariant measure. Here a new class of physics constrained multi-level quadratic regression models are introduced, analysed and applied to build reduced stochastic models from data of nonlinear systems. These models have the advantages of incorporating memory effects in time as well as the nonlinear noise from energy conserving nonlinear interactions. The mathematical guidelines for the performance and behaviour of these physics constrained MLR models as well as filtering algorithms for their implementation are developed here. Data driven applications of these new multi-level nonlinear regression models are developed for test models involving a nonlinear oscillator with memory effects and the difficult test case of the truncated Burgers–Hopf model. These new physics constrained quadratic MLR models are proposed here as process models for Bayesian estimation through Markov chain Monte Carlo algorithms of low frequency behaviour in complex physical data. (paper)

Non-linear finite element modeling

DEFF Research Database (Denmark)

Mikkelsen, Lars Pilgaard

The note is written for courses in "Non-linear finite element method". The note has been used by the author teaching non-linear finite element modeling at Civil Engineering at Aalborg University, Computational Mechanics at Aalborg University Esbjerg, Structural Engineering at the University...

Correlations and Non-Linear Probability Models

DEFF Research Database (Denmark)

Breen, Richard; Holm, Anders; Karlson, Kristian Bernt

2014-01-01

the dependent variable of the latent variable model and its predictor variables. We show how this correlation can be derived from the parameters of non-linear probability models, develop tests for the statistical significance of the derived correlation, and illustrate its usefulness in two applications. Under......Although the parameters of logit and probit and other non-linear probability models are often explained and interpreted in relation to the regression coefficients of an underlying linear latent variable model, we argue that they may also be usefully interpreted in terms of the correlations between...... certain circumstances, which we explain, the derived correlation provides a way of overcoming the problems inherent in cross-sample comparisons of the parameters of non-linear probability models....

Non-linear Loudspeaker Unit Modelling

DEFF Research Database (Denmark)

Pedersen, Bo Rohde; Agerkvist, Finn T.

2008-01-01

Simulations of a 6½-inch loudspeaker unit are performed and compared with a displacement measurement. The non-linear loudspeaker model is based on the major nonlinear functions and expanded with time-varying suspension behaviour and flux modulation. The results are presented with FFT plots of thr...... frequencies and different displacement levels. The model errors are discussed and analysed including a test with loudspeaker unit where the diaphragm is removed....

Tripod sigma: results of a pro-active work stress-survey

NARCIS (Netherlands)

Nelemans, R.; Wiezer, N.; Vaas, F.; Gort, J.; Groeneweg, J.

2003-01-01

Work related stress is an important causes of disability and absenteeism. TNO Work and Employment has developed an instrument, called Tripod Sigma, that identifies risks to work stress and provides tools for remedying these risks. The Tripod Sigma model is developed analogous to the Tripod

CMOS sigma-delta converters practical design guide

CERN Document Server

De la Rosa, Jose M

2013-01-01

A comprehensive overview of Sigma-Delta Analog-to-Digital Converters (ADCs) and a practical guide to their design in nano-scale CMOS for optimal performance. This book presents a systematic and comprehensive compilation of sigma-delta converter operating principles, the new advances in architectures and circuits, design methodologies and practical considerations - going from system-level specifications to silicon integration, packaging and measurements, with emphasis on nanometer CMOS implementation. The book emphasizes practical design issues - from high-level behavioural modelling i

The structure of the .sigma.-ideal of .sigma.-porous sets

Czech Academy of Sciences Publication Activity Database

Zelený, M.; Pelant, Jan

2004-01-01

Roč. 45, č. 1 (2004), s. 37-72 ISSN 0010-2628 R&D Projects: GA ČR GA201/97/1161; GA ČR GA201/97/0216; GA ČR GA201/00/1466; GA AV ČR KSK1019101 Institutional research plan: CEZ:AV0Z1019905 Keywords : .sigma. proposity * descriptive set theory * .sigma.-ideal Subject RIV: BA - General Mathematics

The alternative sigma factor sigma B of Staphylococcus aureus modulates virulence in experimental central venous catheter-related infections.

Science.gov (United States)

Lorenz, Udo; Hüttinger, Christian; Schäfer, Tina; Ziebuhr, Wilma; Thiede, Arnulf; Hacker, Jörg; Engelmann, Susanne; Hecker, Michael; Ohlsen, Knut

2008-03-01

The impact of the alternative sigma factor sigma B (SigB) on pathogenesis of Staphylococcus aureus is not conclusively clarified. In this study, a central venous catheter (CVC) related model of multiorgan infection was used to investigate the role of SigB for the pathogenesis of S. aureus infections and biofilm formation in vivo. Analysis of two SigB-positive wild-type strains and their isogenic mutants revealed uniformly that the wild-type was significantly more virulent than the SigB-deficient mutant. The observed difference in virulence was apparently not linked to the capability of the strains to form biofilms in vivo since wild-type and mutant strains were able to produce biofilm layers inside of the catheter. The data strongly indicate that the alternative sigma factor SigB plays a role in CVC-associated infections caused by S. aureus.

The quantum mechanics of the supersymmetric nonlinear sigma-model

International Nuclear Information System (INIS)

Davis, A.C.; Macfarlane, A.J.; Popat, P.C.; Holten, J.W. van

1984-01-01

The classical and quantum mechanical formalisms of the models are developed. The quantisation is done in such a way that the quantum theory can be represented explicitly in as simple a form as possible, and the problem of ordering of operators is resolved so as to maintain the supersymmetry algebra of the classical theory. (author)

Pion--nucleon sigma-commutator

International Nuclear Information System (INIS)

Banerjee, M.K.; Cammarata, J.B.

1977-07-01

The reasons for the large discrepancies in the magnitude of the πN sigma-commutator, sigma(πN), obtained by several authors are discussed using dynamic theory of the πN scattering amplitude. With sigma(πN) approximately 25 MeV this theory reproduces reasonably well both the experimental S-wave phase shifts at low energies and the amplitudes C approximately/sup(+)/(ν=0,t less than or equal to 0) determined by Langbein. In the method of Cheng and Dashen the value of sigma(πN) is obtained from these amplitudes by extrapolation to t = 2m 2 /sub π/. A study of the experimental D-wave ''scattering lengths'' implies that the coefficient of the term quadratic in t in the Hoehler expansion of C approximately/sup(+)/(0,t) is negative. Adding such a term to the results of the S-wave theory will tend to improve the agreement for C approximately/sup (+)/(0,t less than or equal to 0). These results suggest that the large ''world value'' sigma(πN) = 65 +- 5 MeV obtained using the Cheng-Dashen method is a consequence of errors in the extrapolation of amplitudes to the unphysical point ν = 0, t = 2m 2 /sub π/. Only the smaller value sigma(πN) approximately 25 MeV appears to be consistent with the experimental data and theoretical constraints

Kinetics of sigma phase formation in a Duplex Stainless Steel

Directory of Open Access Journals (Sweden)

Rodrigo Magnabosco

2009-09-01

Full Text Available This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS, describing the phase transformations that occur in isothermal aging between 700 and 900 ºC for time periods up to 1032 hours, allowing the determination of the Time-Temperature-Precipitation (TTP diagram for sigma phase and proposing a model to predict the kinetics of sigma phase formation using a Johnson-Mehl-Avrami (JMA type expression. The higher kinetics of sigma phase formation occurs at 850 ºC. However, isothermal aging between 700 and 900 ºC for time periods up to 1032 hours are not sufficient to the establishment of thermodynamic equilibrium. Activation energy for both nucleation and growth of sigma phase is determined (185 kJ.mol-1 and its value is equivalent to the activation energy for Cr diffusion in ferrite, indicating that diffusion of Cr is probably the major thermally activated process involved in sigma phase formation. The determined JMA type expression presents good fit with experimental data between 700 and 850 ºC.

DEVELOPMENT OF MATHEMATICAL MODELS FOR OPTIMAL PREVENTIVE MAINTENANCE POLICY IN A STEEL INDUSTRY : SIX SIGMA APPROACH

Directory of Open Access Journals (Sweden)

N. V. R. Naidu

2011-09-01

Full Text Available This paper deals with a critical evaluation of the Preventive Maintenance system in steel industry. This study helps in implementing Six Sigma solutions to reduce the down time of two critical machines i.e., Electric Arc Furnace (EAF and Billet Casting Machine (BCM. It is clear from the analysis of EAF and BCM respectively that, variations in output are quite possible because the machines output not only depend on maintenance time but also on several other variables. Further, the objective is to design a preventive maintenance programme on the same equipment situated in the plant using Six Sigma. The breakdown of these equipments could very well affect the production rate. For this, the mathematical models have been developed and these models are used to obtain the optimum preventive maintenance frequency for minimizing the down time and maximizing the profits.

Modeling of Volatility with Non-linear Time Series Model

OpenAIRE

Kim Song Yon; Kim Mun Chol

2013-01-01

In this paper, non-linear time series models are used to describe volatility in financial time series data. To describe volatility, two of the non-linear time series are combined into form TAR (Threshold Auto-Regressive Model) with AARCH (Asymmetric Auto-Regressive Conditional Heteroskedasticity) error term and its parameter estimation is studied.

Decays of open charmed mesons in the extended Linear Sigma Model

Directory of Open Access Journals (Sweden)

Eshraim Walaa I.

2014-01-01

Full Text Available We enlarge the so-called extended linear Sigma model (eLSM by including the charm quark according to the global U(4r × U(4l chiral symmetry. In the eLSM, besides scalar and pseudoscalar mesons, also vector and axial-vector mesons are present. Almost all the parameters of the model were fixed in a previous study of mesons below 2 GeV. In the extension to the four-flavor case, only three additional parameters (all of them related to the bare mass of the charm quark appear.We compute the (OZI dominant strong decays of open charmed mesons. The results are compatible with the experimental data, although the theoretical uncertainties are still large.

Narrow Sigma -hypernuclear states

CERN Document Server

Gal, A

1980-01-01

It is shown that the spin-isospin dependence of low-energy Sigma N to Lambda N conversion leads to substantial quenching of nuclear-matter estimates of the widths of some Sigma -hypernuclear states produced in (K/sup -/, pi ) reactions, to a level below 10 MeV. The estimated widths compare favorably with those of the Sigma -hypernuclear peaks recently observed at CERN for /sup 7/Li, /sup 9/Be, and /sup 12/C. Tentative quantum number assignments are suggested for these states. (10 refs).

Design of the 12-bit Delta-Sigma Modulator using SC Technique for Vibration Sensor Output Processing

Directory of Open Access Journals (Sweden)

M. Pavlik

2012-04-01

Full Text Available The work deals with the design of the 12-bit Delta-Sigma modulator using switched capacitors (SC technique. The modulator serves to vibration sensor output processing. The first part describes the Delta-Sigma modulator parameters definition. Results of the proposed topology ideal model were presented as well. Next, the Delta-Sigma modulator circuitry on the transistor level was done. The ONSemiconductor I2T100 0.7 um CMOS technology was used for design. Then, the Delta-Sigma modulator nonidealities were simulated and implemented into the MATLAB ideal model of the modulator. The model of real Delta-Sigma modulator was derived. Consequently, modulator coefficients were optimized. Finally, the corner analysis of the Delta-Sigma modulator with the optimized coefficients was simulated. The value of SNDR = 82.2 dB (ENOB = 13.4 bits was achieved.

Genome-scale reconstruction of the sigma factor network in Escherichia coli: topology and functional states

DEFF Research Database (Denmark)

Cho, Byung-Kwan; Kim, Donghyuk; Knight, Eric M.

2014-01-01

Background: At the beginning of the transcription process, the RNA polymerase (RNAP) core enzyme requires a sigma-factor to recognize the genomic location at which the process initiates. Although the crucial role of sigma-factors has long been appreciated and characterized for many individual...... to transcription units (TUs), representing an increase of more than 300% over what has been previously reported. The reconstructed network was used to investigate competition between alternative sigma-factors (the sigma(70) and sigma(38) regulons), confirming the competition model of sigma substitution...

Comparing coefficients of nested nonlinear probability models

DEFF Research Database (Denmark)

Kohler, Ulrich; Karlson, Kristian Bernt; Holm, Anders

2011-01-01

In a series of recent articles, Karlson, Holm and Breen have developed a method for comparing the estimated coeffcients of two nested nonlinear probability models. This article describes this method and the user-written program khb that implements the method. The KHB-method is a general decomposi......In a series of recent articles, Karlson, Holm and Breen have developed a method for comparing the estimated coeffcients of two nested nonlinear probability models. This article describes this method and the user-written program khb that implements the method. The KHB-method is a general...... decomposition method that is unaffected by the rescaling or attenuation bias that arise in cross-model comparisons in nonlinear models. It recovers the degree to which a control variable, Z, mediates or explains the relationship between X and a latent outcome variable, Y*, underlying the nonlinear probability...

Nonlinear Control of Heartbeat Models

Directory of Open Access Journals (Sweden)

Witt Thanom

2011-02-01

Full Text Available This paper presents a novel application of nonlinear control theory to heartbeat models. Existing heartbeat models are investigated and modified by incorporating the control input as a pacemaker to provide the control channel. A nonlinear feedback linearization technique is applied to force the output of the systems to generate artificial electrocardiogram (ECG signal using discrete data as the reference inputs. The synthetic ECG may serve as a flexible signal source to assess the effectiveness of a diagnostic ECG signal-processing device.

Edge states and conformal boundary conditions in super spin chains and super sigma models

International Nuclear Information System (INIS)

Bondesan, Roberto; Jacobsen, Jesper L.; Saleur, Hubert

2011-01-01

The sigma models on projective superspaces CP N+M-1|N with topological angle θ=πmod2π flow to non-unitary, logarithmic conformal field theories in the low-energy limit. In this paper, we determine the exact spectrum of these theories for all open boundary conditions preserving the full global symmetry of the model, generalizing recent work on the particular case M=0 [C. Candu et al., JHEP 1002 (2010) 015]. In the sigma model setting, these boundary conditions are associated with complex line bundles, and are labelled by an integer, related with the exact value of θ. Our approach relies on a spin chain regularization, where the boundary conditions now correspond to the introduction of additional edge states. The exact values of the exponents then follow from a lengthy algebraic analysis, a reformulation of the spin chain in terms of crossing and non-crossing loops (represented as a certain subalgebra of the Brauer algebra), and earlier results on the so-called one- and two-boundary Temperley-Lieb algebras (also known as blob algebras). A remarkable result is that the exponents, in general, turn out to be irrational. The case M=1 has direct applications to the spin quantum Hall effect, which will be discussed in a sequel.

Edge states and conformal boundary conditions in super spin chains and super sigma models

Energy Technology Data Exchange (ETDEWEB)

Bondesan, Roberto, E-mail: roberto.bondesan@cea.f [LPTENS, Ecole Normale Superieure, 24 rue Lhomond, 75231 Paris (France); Institute de Physique Theorique, CEA Saclay, F-91191 Gif-sur-Yvette (France); Jacobsen, Jesper L. [LPTENS, Ecole Normale Superieure, 24 rue Lhomond, 75231 Paris (France); Universite Pierre et Marie Curie, 4 place Jussieu, 75252 Paris (France); Saleur, Hubert [Institute de Physique Theorique, CEA Saclay, F-91191 Gif-sur-Yvette (France); Physics Department, USC, Los Angeles, CA 90089-0484 (United States)

2011-08-11

The sigma models on projective superspaces CP{sup N+M-1{vert_bar}N} with topological angle {theta}={pi}mod2{pi} flow to non-unitary, logarithmic conformal field theories in the low-energy limit. In this paper, we determine the exact spectrum of these theories for all open boundary conditions preserving the full global symmetry of the model, generalizing recent work on the particular case M=0 [C. Candu et al., JHEP 1002 (2010) 015]. In the sigma model setting, these boundary conditions are associated with complex line bundles, and are labelled by an integer, related with the exact value of {theta}. Our approach relies on a spin chain regularization, where the boundary conditions now correspond to the introduction of additional edge states. The exact values of the exponents then follow from a lengthy algebraic analysis, a reformulation of the spin chain in terms of crossing and non-crossing loops (represented as a certain subalgebra of the Brauer algebra), and earlier results on the so-called one- and two-boundary Temperley-Lieb algebras (also known as blob algebras). A remarkable result is that the exponents, in general, turn out to be irrational. The case M=1 has direct applications to the spin quantum Hall effect, which will be discussed in a sequel.

Modeling of structural and thermodynamics properties of sigma-phase for the Fe-Cr system

Directory of Open Access Journals (Sweden)

Udovskya A.

2012-01-01

Full Text Available The three- sub-lattice model (3SLM for description of atom’s distribution of two components with different coordination numbers (12, 14 and 15, into s-phase structure depended on composition and temperature is depictured in this paper. Energetic parameters of 3SLM were calculated by fitting procedure fixed to results obtained by ab-initio calculations conducted for paramagnetic states of differently ordered complexes stayed at the sigma-phase’s crystal structure for Fe-Cr system at 0 K. Respective algorithm and computer program have allowed to calculate an atom distribution of components upon the sub-lattices of s-phase at 300 - 1100 K. There is satisfactory agreement between calculated results and the experimental data obtained by neutron and structural research methods. Obtained results demonstrate satisfactory agreement between calculated and experimental data of BCC solutions and sigma - phase of the Fe-Cr system stayed at an equilibrium state.

Holonomy anomalies

International Nuclear Information System (INIS)

Bagger, J.; Nemeschansky, D.; Yankielowicz, S.

1985-05-01

A new type of anomaly is discussed that afflicts certain non-linear sigma models with fermions. This anomaly is similar to the ordinary gauge and gravitational anomalies since it reflects a topological obstruction to the reparametrization invariance of the quantum effective action. Nonlinear sigma models are constructed based on homogeneous spaces G/H. Anomalies arising when the fermions are chiral are shown to be cancelled sometimes by Chern-Simons terms. Nonlinear sigma models are considered based on general Riemannian manifolds. 9 refs

Nonlinear structural mechanics theory, dynamical phenomena and modeling

CERN Document Server

Lacarbonara, Walter

2013-01-01

Nonlinear Structural Mechanics: Theory, Dynamical Phenomena and Modeling offers a concise, coherent presentation of the theoretical framework of nonlinear structural mechanics, computational methods, applications, parametric investigations of nonlinear phenomena and their mechanical interpretation towards design. The theoretical and computational tools that enable the formulation, solution, and interpretation of nonlinear structures are presented in a systematic fashion so as to gradually attain an increasing level of complexity of structural behaviors, under the prevailing assumptions on the geometry of deformation, the constitutive aspects and the loading scenarios. Readers will find a treatment of the foundations of nonlinear structural mechanics towards advanced reduced models, unified with modern computational tools in the framework of the prominent nonlinear structural dynamic phenomena while tackling both the mathematical and applied sciences. Nonlinear Structural Mechanics: Theory, Dynamical Phenomena...

Explicit Nonlinear Model Predictive Control Theory and Applications

CERN Document Server

Grancharova, Alexandra

2012-01-01

Nonlinear Model Predictive Control (NMPC) has become the accepted methodology to solve complex control problems related to process industries. The main motivation behind explicit NMPC is that an explicit state feedback law avoids the need for executing a numerical optimization algorithm in real time. The benefits of an explicit solution, in addition to the efficient on-line computations, include also verifiability of the implementation and the possibility to design embedded control systems with low software and hardware complexity. This book considers the multi-parametric Nonlinear Programming (mp-NLP) approaches to explicit approximate NMPC of constrained nonlinear systems, developed by the authors, as well as their applications to various NMPC problem formulations and several case studies. The following types of nonlinear systems are considered, resulting in different NMPC problem formulations: Ø  Nonlinear systems described by first-principles models and nonlinear systems described by black-box models; �...

Lean Six Sigma in financial services

NARCIS (Netherlands)

de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

2008-01-01

Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant

Analysis of nonlinear systems using ARMA [autoregressive moving average] models

International Nuclear Information System (INIS)

Hunter, N.F. Jr.

1990-01-01

While many vibration systems exhibit primarily linear behavior, a significant percentage of the systems encountered in vibration and model testing are mildly to severely nonlinear. Analysis methods for such nonlinear systems are not yet well developed and the response of such systems is not accurately predicted by linear models. Nonlinear ARMA (autoregressive moving average) models are one method for the analysis and response prediction of nonlinear vibratory systems. In this paper we review the background of linear and nonlinear ARMA models, and illustrate the application of these models to nonlinear vibration systems. We conclude by summarizing the advantages and disadvantages of ARMA models and emphasizing prospects for future development. 14 refs., 11 figs

Correlation holography: imaging of atoms when sigma/sub inelastic//sup >>sigma/elastic

International Nuclear Information System (INIS)

Csonka, P.L.

1979-01-01

Atomic-scale resolution of details is possible with this method, even if protons interact with the atoms overwhelmingly inelastically, i.e. when sigma/sub inelastic/ >>sigma/sub elastic/. Observation of small objects is compatible with quantum mechanics even if the disturbance of the object caused by the observation process is arbitrarily small

Design for six sigma: A review

Directory of Open Access Journals (Sweden)

Kouroush Jenab

2018-01-01

Full Text Available Six Sigma is recognized as an essential tool for continuous improvement of quality. A large num-ber of publications by various authors reflect the interest in this technique. Reviews of literature on Six Sigma have been done in the past by a few authors. However, considering the contributions in the recent times, a more comprehensive review is attempted here. The authors have examined vari-ous papers and have proposed a different scheme of classification. In addition, certain gaps that would provide hints for further research in Six Sigma have been identified. As a results the rela-tionship between Six Sigma, Design for Six Sigma (DFSS, and how these two concepts support the quality system for organizational learning and innovation performance have been discussed that would help researchers, academicians and practitioners to take a closer look at the growth, devel-opment and applicability of Six Sigma in Design.

Nonlinear State Space Modeling and System Identification for Electrohydraulic Control

Directory of Open Access Journals (Sweden)

Jun Yan

2013-01-01

Full Text Available The paper deals with nonlinear modeling and identification of an electrohydraulic control system for improving its tracking performance. We build the nonlinear state space model for analyzing the highly nonlinear system and then develop a Hammerstein-Wiener (H-W model which consists of a static input nonlinear block with two-segment polynomial nonlinearities, a linear time-invariant dynamic block, and a static output nonlinear block with single polynomial nonlinearity to describe it. We simplify the H-W model into a linear-in-parameters structure by using the key term separation principle and then use a modified recursive least square method with iterative estimation of internal variables to identify all the unknown parameters simultaneously. It is found that the proposed H-W model approximates the actual system better than the independent Hammerstein, Wiener, and ARX models. The prediction error of the H-W model is about 13%, 54%, and 58% less than the Hammerstein, Wiener, and ARX models, respectively.

DESIGN FOR SIX SIGMA

Directory of Open Access Journals (Sweden)

Liem Ferryanto

2007-01-01

Full Text Available This article provides a step by step process of executing analytical or computer based Design for Six Sigma using a Sliding Door project as an example. It comprises of identification of Voice Of the Customer (VOC, transformation of VOC to what it is called Critical To Quality characteristics (CTQs, modeling of system transfers function, optimal and robust solutions, and tolerance design approach

Getting the sigma in the M_BH - sigma relation right

Science.gov (United States)

van der Marel, Roeland

2017-08-01

The relation between the mass of the central supermassive black hole (M_BH) and the velocity dispersion of its host spheroid (sigma) is fundamental for our understanding of galaxy evolution and its relation to their nuclei. Correspondingly many HST orbits have been invested in determining accurate M_BH masses. Surprisingly little has been done on standardizing the other axis, i.e. sigma measurements. These values are often derived from various long-slit datasets at different physical radii of the galaxy and no homogeneous definition has been given. We propose to remedy this situation by using our dataset of MUSE and PPAK kinematic maps out to 1 R_e of galaxies with a secure black hole mass. These data are useful for large scale kinematics, however, obtaining velocity dispersions at small radii is not possible. To measure velocity dispersions at small radii we require high-spatial resolution spectroscopy as provided by HST/STIS. In addtion, high-resolution photometric data is needed to define consistent apertures in each galaxy. We therefore propose to use the unique capabilities of HST and harvest years of efforts to collect archival spectroscopic and imaging data for BH host galaxies. This will allow creating a catalog of sigma values, calculated in various ways and at various radii and to re-calibrate the M_BH - sigma relation.

Four-loop divergences of the two-dimensional (1,1) supersymmetric non-linear sigma model with a Wess-Zumino-Witten term

International Nuclear Information System (INIS)

Deriglazov, A.A.; Ketov, S.V.

1991-01-01

The four-loop divergences of the (1,1) supersymmetric two-dimensional non-linear σ-model with a Wess-Zumino-Witten term are analyzed. All the four-loop 1/ε-divergences in the general case (and an overall coefficient at the total four-loop contribution to the β-function) are shown to be reducible to only structures proportional to ζ(3). We explicitly calculate non-derivative contributions to the four-loop β-function from logarithmically divergent graphs. As a by-product, we obtain the complete four-loop β-function for the supersymmetric Wess-Zumino-Witten model. We use the partial results for the general four-loop β-function to shed some light on the structure of the (α') 3 -corrections to the superstring effective-action with antisymmetric-tensor field coupling. An inconsistency of the supersymmetrical dimensional regularisation via dimensional reduction in the presence of torsion is discovered at four loops, unless the string interpretation for the σ-model is adopted. (orig.)

Baryon and meson phenomenology in the extended Linear Sigma Model

Energy Technology Data Exchange (ETDEWEB)

Giacosa, Francesco; Habersetzer, Anja; Teilab, Khaled; Eshraim, Walaa; Divotgey, Florian; Olbrich, Lisa; Gallas, Susanna; Wolkanowski, Thomas; Janowski, Stanislaus; Heinz, Achim; Deinet, Werner; Rischke, Dirk H. [Institute for Theoretical Physics, J. W. Goethe University, Max-von-Laue-Str. 1, 60438 Frankfurt am Main (Germany); Kovacs, Peter; Wolf, Gyuri [Institute for Particle and Nuclear Physics, Wigner Research Center for Physics, Hungarian Academy of Sciences, H-1525 Budapest (Hungary); Parganlija, Denis [Institute for Theoretical Physics, Vienna University of Technology, Wiedner Hauptstr. 8-10, A-1040 Vienna (Austria)

2014-07-01

The vacuum phenomenology obtained within the so-called extended Linear Sigma Model (eLSM) is presented. The eLSM Lagrangian is constructed by including from the very beginning vector and axial-vector d.o.f., and by requiring dilatation invariance and chiral symmetry. After a general introduction of the approach, particular attention is devoted to the latest results. In the mesonic sector the strong decays of the scalar and the pseudoscalar glueballs, the weak decays of the tau lepton into vector and axial-vector mesons, and the description of masses and decays of charmed mesons are shown. In the baryonic sector the omega production in proton-proton scattering and the inclusion of baryons with strangeness are described.

Twining genera of (0,4) supersymmetric sigma models on K3

International Nuclear Information System (INIS)

Harrison, Sarah; Kachru, Shamit; Paquette, Natalie M.

2014-01-01

Conformal field theories with (0,4) worldsheet supersymmetry and K3 target can be used to compactify the E 8 ×E 8 heterotic string to six dimensions in a supersymmetric manner. The data specifying such a model includes an appropriate configuration of 24 gauge instantons in the E 8 ×E 8 gauge group to satisfy the constraints of anomaly cancellation. In this note, we compute twining genera — elliptic genera with appropriate insertions of discrete symmetry generators in the trace — for (0,4) theories with various instanton embeddings. We do this by constructing linear sigma models which flow to the desired conformal field theories, and using the techniques of localization. We present several examples of such twining genera which are consistent with a moonshine relating these (0,4) models to the finite simple sporadic group M 24

Barriers of six sigma in healthcare organizations

Directory of Open Access Journals (Sweden)

Serkan Deniz

2018-09-01

Full Text Available Six Sigma approach is based on decreasing defects and variations in the products and processes, and it provides important benefits to healthcare organizations. This study aims to identify managers’ opinions, who work in private healthcare organizations, about the reasons behind not using Six Sigma in their organizations. The research was performed between December 2016 and March 2018 in private healthcare organizations (private hospitals and medical centers operating in Turkey and not using Six Sigma approach. Data were collected from managers, who have knowledge about Six Sigma, through using surveys. In this study, survey methodology was used to collect data. According to the results, the biggest barrier related to not using Six Sigma is based on the lack of knowledge about Six Sigma. The other important barrier about the diffusion of Six Sigma within this organizations is related to the lack of support from top management and leaders. Another finding about the reasons of not applying Six Sigma approach is that there is not a statistically significant difference among managers in terms of their managerial position. In order to overcome the lack of knowledge about Six Sigma, it is advised that managers should take steps in the direction of promoting Six Sigma within their current organization, and provide necessary support and leadership about the process.

NONLINEAR PLANT PIECEWISE-CONTINUOUS MODEL MATRIX PARAMETERS ESTIMATION

Directory of Open Access Journals (Sweden)

Roman L. Leibov

2017-09-01

Full Text Available This paper presents a nonlinear plant piecewise-continuous model matrix parameters estimation technique using nonlinear model time responses and random search method. One of piecewise-continuous model application areas is defined. The results of proposed approach application for aircraft turbofan engine piecewisecontinuous model formation are presented

Can a Linear Sigma Model Describe Walking Gauge Theories at Low Energies?

Science.gov (United States)

Gasbarro, Andrew

2018-03-01

In recent years, many investigations of confining Yang Mills gauge theories near the edge of the conformal window have been carried out using lattice techniques. These studies have revealed that the spectrum of hadrons in nearly conformal ("walking") gauge theories differs significantly from the QCD spectrum. In particular, a light singlet scalar appears in the spectrum which is nearly degenerate with the PNGBs at the lightest currently accessible quark masses. This state is a viable candidate for a composite Higgs boson. Presently, an acceptable effective field theory (EFT) description of the light states in walking theories has not been established. Such an EFT would be useful for performing chiral extrapolations of lattice data and for serving as a bridge between lattice calculations and phenomenology. It has been shown that the chiral Lagrangian fails to describe the IR dynamics of a theory near the edge of the conformal window. Here we assess a linear sigma model as an alternate EFT description by performing explicit chiral fits to lattice data. In a combined fit to the Goldstone (pion) mass and decay constant, a tree level linear sigma model has a Χ2/d.o.f. = 0.5 compared to Χ2/d.o.f. = 29.6 from fitting nextto-leading order chiral perturbation theory. When the 0++ (σ) mass is included in the fit, Χ2/d.o.f. = 4.9. We remark on future directions for providing better fits to the σ mass.

Study of the nonlinear imperfect software debugging model

International Nuclear Information System (INIS)

Wang, Jinyong; Wu, Zhibo

2016-01-01

In recent years there has been a dramatic proliferation of research on imperfect software debugging phenomena. Software debugging is a complex process and is affected by a variety of factors, including the environment, resources, personnel skills, and personnel psychologies. Therefore, the simple assumption that debugging is perfect is inconsistent with the actual software debugging process, wherein a new fault can be introduced when removing a fault. Furthermore, the fault introduction process is nonlinear, and the cumulative number of nonlinearly introduced faults increases over time. Thus, this paper proposes a nonlinear, NHPP imperfect software debugging model in consideration of the fact that fault introduction is a nonlinear process. The fitting and predictive power of the NHPP-based proposed model are validated through related experiments. Experimental results show that this model displays better fitting and predicting performance than the traditional NHPP-based perfect and imperfect software debugging models. S-confidence bounds are set to analyze the performance of the proposed model. This study also examines and discusses optimal software release-time policy comprehensively. In addition, this research on the nonlinear process of fault introduction is significant given the recent surge of studies on software-intensive products, such as cloud computing and big data. - Highlights: • Fault introduction is a nonlinear changing process during the debugging phase. • The assumption that the process of fault introduction is nonlinear is credible. • Our proposed model can better fit and accurately predict software failure behavior. • Research on fault introduction case is significant to software-intensive products.

Reducción de gasto energético eléctrico usando seis sigma

OpenAIRE

Morato Orozco, Juan Sebastián

2009-01-01

The application of Six Sigma to the models of energy management is vital because it brings a continuous improvement, optimizes the efficient consumption of energy and strengthens the conservation culture. This article shows an example of the application of the Six Sigma methodology in the energy management models used for the “Reduction of Energy Waste” in the Sumicol-Corona industrial park in Sabaneta, Antioquia. La aplicación de Seis Sigma a los modelos de gestión energética ...

Usulan Perbaikan Kualitas Penggulungan Benang Nilon Dengan Menggunakan Metode Six Sigma di PT. XYZ

Directory of Open Access Journals (Sweden)

I Wayan Sukania

2016-07-01

Full Text Available Abstrak: PT. XYZ merupakan perusahaan yang bergerak dibidang textil yang memproduksi benang jahit. Perusahaan selalu berusaha meningkatkan kualitas produknya dalam penanganan produk yang cacat yang terjadi pada proses produksi karena jumlah cacat yang timbul cukup banyak. Untuk itu perlu dilakukan tindakan perbaikan dalam menurunkan tingkat cacat yang terjadi. Pada penelitian ini, penulis menggunakan metode six sigma dengan model perbaikian Define-Measure-Analyze-Improve-Control (DMAIC dan Failure Mode and Effect Analysis (FMEA untuk menganalisis kinerja proses dan produk yang dihasilkan. Penerapan metode tersebut diharapakan mampu meningkatkan kualitas perusahaan yang sekarang pada level sigma 3,8 menuju tingkat kinerja kualitas 6 Sigma. Kata kunci: Six Sigma, FMEA Abstract: PT. XYZ is a company engaged in textile-producing sewing thread. The company is always trying to improve the quality of products due to quite a lot of products defects occur in the production process. It is necessary for corrective action in reducing the level of defects that occur. In this research, the six sigma with Define-Measure Analyze-Improve-Control (DMAIC and Failure Mode and Effect Analysis (FMEA models were used to analyze the performance of processes and products. Application of those methods are expected to be able to improve the quality of company that are now at the level of sigma 3,8 to 6 sigma level of quality performance . Keywords: Six Sigma, FMEA

Six Sigma in Education

Science.gov (United States)

LeMahieu, Paul G.; Nordstrum, Lee E.; Cudney, Elizabeth A.

2017-01-01

Purpose: This paper is one of seven in this volume that aims to elaborate different approaches to quality improvement in education. It delineates a methodology called Six Sigma. Design/methodology/approach: The paper presents the origins, theoretical foundations, core principles and a case study demonstrating an application of Six Sigma in a…

Nonlinear distortion in wireless systems modeling and simulation with Matlab

CERN Document Server

Gharaibeh, Khaled M

2011-01-01

This book covers the principles of modeling and simulation of nonlinear distortion in wireless communication systems with MATLAB simulations and techniques In this book, the author describes the principles of modeling and simulation of nonlinear distortion in single and multichannel wireless communication systems using both deterministic and stochastic signals. Models and simulation methods of nonlinear amplifiers explain in detail how to analyze and evaluate the performance of data communication links under nonlinear amplification. The book addresses the analysis of nonlinear systems

Use of the Six Sigma by the 500 Largent Companies in Portugal

OpenAIRE

Mendes da Conceição, Ana Cristina; Martins Ferreira Major, Maria João

2011-01-01

The Six Sigma had its genesis in big industrial companies that have implemented it as a tool for reducing defects. The initial success encouraged its application in other areas and we see today successful implementation in other sectors such as services, and within their own organizations in other areas beyond production, setting; this has contributed to Six Sigma being recognized as a new management model. In order to determine the extent to which Six Sigma is present in Portuguese companies...

Bose-Einstein condensation and chiral phase transition in linear sigma model

International Nuclear Information System (INIS)

Shu Song; Li Jiarong

2005-01-01

With the linear sigma model, we have studied Bose-Einstein condensation and the chiral phase transition in the chiral limit for an interacting pion system. A μ-T phase diagram including these two phenomena is presented. It is found that the phase plane has been divided into three areas: the Bose-Einstein condensation area, the chiral symmetry broken phase area and the chiral symmetry restored phase area. Bose-Einstein condensation can occur either from the chiral symmetry broken phase or from the restored phase. We show that the onset of the chiral phase transition is restricted in the area where there is no Bose-Einstein condensation

Modelling nonlinear viscoelastic behaviours of loudspeaker suspensions-like structures

Science.gov (United States)

Maillou, Balbine; Lotton, Pierrick; Novak, Antonin; Simon, Laurent

2018-03-01

Mechanical properties of an electrodynamic loudspeaker are mainly determined by its suspensions (surround and spider) that behave nonlinearly and typically exhibit frequency dependent viscoelastic properties such as creep effect. The paper aims at characterizing the mechanical behaviour of electrodynamic loudspeaker suspensions at low frequencies using nonlinear identification techniques developed in recent years. A Generalized Hammerstein based model can take into account both frequency dependency and nonlinear properties. As shown in the paper, the model generalizes existing nonlinear or viscoelastic models commonly used for loudspeaker modelling. It is further experimentally shown that a possible input-dependent law may play a key role in suspension characterization.

Quantitative application of sigma metrics in medical biochemistry.

Science.gov (United States)

Nanda, Sunil Kumar; Ray, Lopamudra

2013-12-01

Laboratory errors are result of a poorly designed quality system in the laboratory. Six Sigma is an error reduction methodology that has been successfully applied at Motorola and General Electric. Sigma (σ) is the mathematical symbol for standard deviation (SD). Sigma methodology can be applied wherever an outcome of a process has to be measured. A poor outcome is counted as an error or defect. This is quantified as defects per million (DPM). A six sigma process is one in which 99.999666% of the products manufactured are statistically expected to be free of defects. Six sigma concentrates, on regulating a process to 6 SDs, represents 3.4 DPM (defects per million) opportunities. It can be inferred that as sigma increases, the consistency and steadiness of the test improves, thereby reducing the operating costs. We aimed to gauge performance of our laboratory parameters by sigma metrics. Evaluation of sigma metrics in interpretation of parameter performance in clinical biochemistry. The six month internal QC (October 2012 to march 2013) and EQAS (external quality assurance scheme) were extracted for the parameters-Glucose, Urea, Creatinine, Total Bilirubin, Total Protein, Albumin, Uric acid, Total Cholesterol, Triglycerides, Chloride, SGOT, SGPT and ALP. Coefficient of variance (CV) were calculated from internal QC for these parameters. Percentage bias for these parameters was calculated from the EQAS. Total allowable errors were followed as per Clinical Laboratory Improvement Amendments (CLIA) guidelines. Sigma metrics were calculated from CV, percentage bias and total allowable error for the above mentioned parameters. For parameters - Total bilirubin, uric acid, SGOT, SGPT and ALP, the sigma values were found to be more than 6. For parameters - glucose, Creatinine, triglycerides, urea, the sigma values were found to be between 3 to 6. For parameters - total protein, albumin, cholesterol and chloride, the sigma values were found to be less than 3. ALP was the best

Renormalized trajectory for non-linear sigma model and improved scaling behaviour

International Nuclear Information System (INIS)

Guha, A.; Okawa, M.; Zuber, J.B.

1984-01-01

We apply the block-spin renormalization group method to the O(N) Heisenberg spin model. Extending a previous work of Hirsch and Shenker, we find the renormalized trajectory for O(infinite) in two dimensions. Four finite N models, we choose a four-parameter action near the large-N renormalized trajectory and demonstrate a remarkable improvement in the approach to continuum limit by performing Monte Carlo simulation of O(3) and O(4) models. (orig.)

A gauged baby Skyrme model and a novel BPS bound

International Nuclear Information System (INIS)

Adam, C; Naya, C; Sanchez-Guillen, J; Wereszczynski, A

2013-01-01

The baby Skyrme model is a well-known nonlinear field theory supporting topological solitons in two space dimensions. Its action functional consist of a potential term, a kinetic term quadratic in derivatives (the 'nonlinear sigma model term') and the Skyrme term quartic in first derivatives. The limiting case of vanishing sigma model term (the so-called BPS baby Skyrme model) is known to support exact soliton solutions saturating a BPS bound which exists for this model. Further, the BPS model has infinitely many symmetries and conservation laws. Recently it was found that the gauged version of the BPS baby Skyrme model with gauge group U(1) and the usual Maxwell term, too, has a BPS bound and BPS solutions saturating this bound. This BPS bound is determined by a superpotential which has to obey a superpotential equation, in close analogy to the situation in supergravity. Further, the BPS bound and the corresponding BPS solitons only may exist for potentials such that the superpotential equation has a global solution. We also briefly describe some properties of soliton solutions.

A 8X Oversampling Ratio, 14bit, 5-MSamples/s Cascade 3-1 Sigma-delta Modulator

Directory of Open Access Journals (Sweden)

Y. Yin

2005-01-01

Full Text Available A 14-b, 5-MHz output-rate cascaded 3-1 sigma-delta analog-to-digital converters (ADC has been developed for broadband communication applications, and a novel 4th-order noise-shaping is obtained by using the proposed architecture. At a low oversampling ratio (OSR of 8, the ADC achieves 91.5dB signal-to-quantization ratio (SQNR, in contrast to 71.8dB of traditional 2-1-1 cascaded sigma-delta ADC in 2.5-MHz bandwidth and over 80dB signal-to-noise and distortion (SINAD even under assumptions of awful circuit non-idealities and opamp non-linearity. The proposed architecture can potentially operates at much more high frequencies with scaled IC technology, to expand the analog-to-digital conversion rate for high-resolution applications.

Commutative $C^*$-algebras and $\\sigma$-normal morphisms

OpenAIRE

de Jeu, Marcel

2003-01-01

We prove in an elementary fashion that the image of a commutative monotone $\\sigma$-complete $C^*$-algebra under a $\\sigma$-normal morphism is again monotone $\\sigma$-complete and give an application of this result in spectral theory.

Model reduction of nonlinear systems subject to input disturbances

KAUST Repository

Ndoye, Ibrahima

2017-07-10

The method of convex optimization is used as a tool for model reduction of a class of nonlinear systems in the presence of disturbances. It is shown that under some conditions the nonlinear disturbed system can be approximated by a reduced order nonlinear system with similar disturbance-output properties to the original plant. The proposed model reduction strategy preserves the nonlinearity and the input disturbance nature of the model. It guarantees a sufficiently small error between the outputs of the original and the reduced-order systems, and also maintains the properties of input-to-state stability. The matrices of the reduced order system are given in terms of a set of linear matrix inequalities (LMIs). The paper concludes with a demonstration of the proposed approach on model reduction of a nonlinear electronic circuit with additive disturbances.

Non-linear Growth Models in Mplus and SAS

Science.gov (United States)

Grimm, Kevin J.; Ram, Nilam

2013-01-01

Non-linear growth curves or growth curves that follow a specified non-linear function in time enable researchers to model complex developmental patterns with parameters that are easily interpretable. In this paper we describe how a variety of sigmoid curves can be fit using the Mplus structural modeling program and the non-linear mixed-effects modeling procedure NLMIXED in SAS. Using longitudinal achievement data collected as part of a study examining the effects of preschool instruction on academic gain we illustrate the procedures for fitting growth models of logistic, Gompertz, and Richards functions. Brief notes regarding the practical benefits, limitations, and choices faced in the fitting and estimation of such models are included. PMID:23882134

Model of anisotropic nonlinearity in self-defocusing photorefractive media.

Science.gov (United States)

Barsi, C; Fleischer, J W

2015-09-21

We develop a phenomenological model of anisotropy in self-defocusing photorefractive crystals. In addition to an independent term due to nonlinear susceptibility, we introduce a nonlinear, non-separable correction to the spectral diffraction operator. The model successfully describes the crossover between photovoltaic and photorefractive responses and the spatially dispersive shock wave behavior of a nonlinearly spreading Gaussian input beam. It should prove useful for characterizing internal charge dynamics in complex materials and for accurate image reconstruction through nonlinear media.

Lean Six Sigma in financial services

OpenAIRE

de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

2008-01-01

Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant results and breakthrough improvements in financial services, as demonstrated with four case studies from Dutch multinational insurance companies. These cases demonstrate the importance of incremental i...

Nonlinear model predictive control theory and algorithms

CERN Document Server

Grüne, Lars

2017-01-01

This book offers readers a thorough and rigorous introduction to nonlinear model predictive control (NMPC) for discrete-time and sampled-data systems. NMPC schemes with and without stabilizing terminal constraints are detailed, and intuitive examples illustrate the performance of different NMPC variants. NMPC is interpreted as an approximation of infinite-horizon optimal control so that important properties like closed-loop stability, inverse optimality and suboptimality can be derived in a uniform manner. These results are complemented by discussions of feasibility and robustness. An introduction to nonlinear optimal control algorithms yields essential insights into how the nonlinear optimization routine—the core of any nonlinear model predictive controller—works. Accompanying software in MATLAB® and C++ (downloadable from extras.springer.com/), together with an explanatory appendix in the book itself, enables readers to perform computer experiments exploring the possibilities and limitations of NMPC. T...

N=12 supersymmetric four-dimensional nonlinear σ-models from nonanticommutative superspace

International Nuclear Information System (INIS)

Hatanaka, Tomoya; Ketov, Sergei V.; Kobayashi, Yoshishige; Sasaki, Shin

2005-01-01

The component structure of a generic N=1/2 supersymmetric nonlinear sigma-model (NLSM) defined in the four-dimensional (Euclidean) nonanticommutative (NAC) superspace is investigated in detail. The most general NLSM is described in terms of arbitrary Kahler potential, and chiral and antichiral superpotentials. The case of a single chiral superfield gives rise to splitting of the NLSM potentials, whereas the case of several chiral superfields results in smearing (or fuzziness) of the NLSM potentials, while both effects are controlled by the auxiliary fields. We eliminate the auxiliary fields by solving their algebraic equations of motion, and demonstrate that the results are dependent upon whether the auxiliary integrations responsible for the fuzziness are performed before or after elimination of the auxiliary fields. There is no ambiguity in the case of splitting, i.e., for a single chiral superfield. Fully explicit results are derived in the case of the N=1/2 supersymmetric NAC-deformed CP n NLSM in four dimensions. Here we find another surprise that our results differ from the N=1/2 supersymmetric CP n NLSM derived by the quotient construction from the N=1/2 supersymmetric NAC-deformed gauge theory. We conclude that an N=1/2 supersymmetric deformation of a generic NLSM from the NAC superspace is not unique

Mucosal vaccination by adenoviruses displaying reovirus sigma 1

Energy Technology Data Exchange (ETDEWEB)

Weaver, Eric A. [Department of Internal Medicine, Division of Infectious Diseases, Translational Immunovirology and Biodefense Program, Mayo Clinic, Rochester, MN 55902 (United States); Camacho, Zenaido T. [Department of Cell Biology, Department of Natural Sciences, Western New Mexico University, Silver City, NM 88062 (United States); Hillestad, Matthew L. [Nephrology Training Program, Mayo Clinic, Rochester, MN 55902 (United States); Crosby, Catherine M.; Turner, Mallory A.; Guenzel, Adam J.; Fadel, Hind J. [Virology and Gene Therapy Graduate Program, Mayo Clinic, Rochester, MN 55902 (United States); Mercier, George T. [Department of Physics, University of Houston, Houston, TX 77004 (United States); Barry, Michael A., E-mail: mab@mayo.edu [Department of Internal Medicine, Division of Infectious Diseases, Translational Immunovirology and Biodefense Program, Mayo Clinic, Rochester, MN 55902 (United States); Department of Immunology and Department of Molecular Medicine, Mayo Clinic, Rochester, MN 55902 (United States)

2015-08-15

We developed adenovirus serotype 5 (Ad5) vectors displaying the sigma 1 protein from reovirus as mucosal vaccines. Ad5-sigma retargets to JAM-1 and sialic acid, but has 40-fold reduced gene delivery when compared to Ad5. While weaker at transduction, Ad5-sigma generates stronger T cell responses than Ad5 when used for mucosal immunization. In this work, new Ad5-fiber-sigma vectors were generated by varying the number of fiber β-spiral shaft repeats (R) between the fiber tail and sigma. Increasing chimera length led to decreasing insertion of these proteinsAd5 virions. Ad-R3 and R14 vectors effectively targeted JAM-1 in vitro while R20 did not. When wereused to immunize mice by the intranasal route, Ad5-R3-sigma produced higher serum and vaginal antibody responses than Ad5. These data suggest optimized Ad-sigma vectors may be useful vectors for mucosal vaccination. - Highlights: • Constructed adenoviruses (Ads) displaying different reovirus sigma 1 fusion proteins. • Progressively longer chimeras were more poorly encapsidated onto Ad virions. • Ad5-R3-sigma mediated better systemic and mucosal immune responses than Ad5.

Mucosal vaccination by adenoviruses displaying reovirus sigma 1

International Nuclear Information System (INIS)

Weaver, Eric A.; Camacho, Zenaido T.; Hillestad, Matthew L.; Crosby, Catherine M.; Turner, Mallory A.; Guenzel, Adam J.; Fadel, Hind J.; Mercier, George T.; Barry, Michael A.

2015-01-01

We developed adenovirus serotype 5 (Ad5) vectors displaying the sigma 1 protein from reovirus as mucosal vaccines. Ad5-sigma retargets to JAM-1 and sialic acid, but has 40-fold reduced gene delivery when compared to Ad5. While weaker at transduction, Ad5-sigma generates stronger T cell responses than Ad5 when used for mucosal immunization. In this work, new Ad5-fiber-sigma vectors were generated by varying the number of fiber β-spiral shaft repeats (R) between the fiber tail and sigma. Increasing chimera length led to decreasing insertion of these proteinsAd5 virions. Ad-R3 and R14 vectors effectively targeted JAM-1 in vitro while R20 did not. When wereused to immunize mice by the intranasal route, Ad5-R3-sigma produced higher serum and vaginal antibody responses than Ad5. These data suggest optimized Ad-sigma vectors may be useful vectors for mucosal vaccination. - Highlights: • Constructed adenoviruses (Ads) displaying different reovirus sigma 1 fusion proteins. • Progressively longer chimeras were more poorly encapsidated onto Ad virions. • Ad5-R3-sigma mediated better systemic and mucosal immune responses than Ad5

Parameter Estimation of Nonlinear Models in Forestry.

OpenAIRE

Fekedulegn, Desta; Mac Siúrtáin, Máirtín Pádraig; Colbert, Jim J.

1999-01-01

Partial derivatives of the negative exponential, monomolecular, Mitcherlich, Gompertz, logistic, Chapman-Richards, von Bertalanffy, Weibull and the Richard’s nonlinear growth models are presented. The application of these partial derivatives in estimating the model parameters is illustrated. The parameters are estimated using the Marquardt iterative method of nonlinear regression relating top height to age of Norway spruce (Picea abies L.) from the Bowmont Norway Spruce Thinnin...

Study of Sigma /sup +or-/(1385) inclusive production in K/sup -/p interactions at 42 GeV/c

CERN Document Server

Barreiro, F; Blokzijl, R; Engelen, J J; Ganguli, S N; Gavillet, P; Hemingway, R J; Kittel, E W; Kluyver, J C; Shephard, W D; Wolters, G F

1977-01-01

Properties of Sigma /sup +or-/(1385) inclusively produced in 4.2 GeV/c K/sup -/p interactions are studied. Inclusive cross sections are presented together with differential cross sections as functions of x and p/sub t//sup 2/ for both Sigma /sup +/(1385) and Sigma /sup - /(1385). The complete density matrix for Sigma /sup +/(1385) production at small momentum transfer is studied as a function of t and of recoil mass MM/sup 2/. Substantial agreement with the predictions of the additive quark model is found. The Sigma /sup + /(1385) production in the target fragmentation region is studied in the framework of the triple-Regge model. (17 refs).

THE LEAN AND SIX SIGMA SINERGY

Directory of Open Access Journals (Sweden)

Mirko Sokovic

2008-12-01

Full Text Available Many organizations, dealing with continuous improvement methods, have realized that Lean and Six Sigma methodologies complement each other. Lean manufacturing focuses on the remova l of waste so that all processes in the total system add value from the customers' perspectives. The main emphasis of Six Sigma is the application of statistical tools in a disciplined manner, which requires data-driven decision-making. The integration of Lean and Six Sigma provides a synergetic effect, a rapid process improvement strategy for attaining organizational goals. When separated, Lean manufacturing cannot bring a process under statistical control, and Six Sigma cannot dramatically improve cycle time or reduce invested capital. Together, synergistic qualities are created to maximize the potential for a process improvement. The paper deals with Lean and Six Sigma principles and approaches used in modern manufacturing for process improvements, and bring forward benefits that are gained when these two methodologies are integrated.

A Simple Model for Nonlinear Confocal Ultrasonic Beams

Science.gov (United States)

Zhang, Dong; Zhou, Lin; Si, Li-Sheng; Gong, Xiu-Fen

2007-01-01

A confocally and coaxially arranged pair of focused transmitter and receiver represents one of the best geometries for medical ultrasonic imaging and non-invasive detection. We develop a simple theoretical model for describing the nonlinear propagation of a confocal ultrasonic beam in biological tissues. On the basis of the parabolic approximation and quasi-linear approximation, the nonlinear Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation is solved by using the angular spectrum approach. Gaussian superposition technique is applied to simplify the solution, and an analytical solution for the second harmonics in the confocal ultrasonic beam is presented. Measurements are performed to examine the validity of the theoretical model. This model provides a preliminary model for acoustic nonlinear microscopy.

Lean Six Sigma implementation and organizational culture.

Science.gov (United States)

Knapp, Susan

2015-01-01

The purpose of this paper is to examine the relationship between four organizational cultural types defined by the Competing Values Framework and three Lean Six Sigma implementation components - management involvement, use of Lean Six Sigma methods and Lean Six Sigma infrastructure. The study involved surveying 446 human resource and quality managers from 223 hospitals located in Maine, New Hampshire, Vermont, Massachusetts and Rhode Island using the Organizational Culture Assessment Instrument. Findings - In total, 104 completed responses were received and analyzed using multivariate analysis of variance. Follow-up analysis of variances showed management support was significant, F(3, 100)=4.89, p cultures having significant interactions with management support. The relationship between organizational culture and Lean Six Sigma in hospitals provides information on how specific cultural characteristics impact the Lean Six Sigma initiative key components. This information assists hospital staff who are considering implementing quality initiatives by providing an understanding of what cultural values correspond to effective Lean Six Sigma implementation. Managers understanding the quality initiative cultural underpinnings, are attentive to the culture-shared values and norm's influence can utilize strategies to better implement Lean Six Sigma.

Nonlinear flow model for well production in an underground formation

Directory of Open Access Journals (Sweden)

J. C. Guo

2013-05-01

Full Text Available Fluid flow in underground formations is a nonlinear process. In this article we modelled the nonlinear transient flow behaviour of well production in an underground formation. Based on Darcy's law and material balance equations, we used quadratic pressure gradients to deduce diffusion equations and discuss the origins of nonlinear flow issues. By introducing an effective-well-radius approach that considers skin factor, we established a nonlinear flow model for both gas and liquid (oil or water. The liquid flow model was solved using a semi-analytical method, while the gas flow model was solved using numerical simulations because the diffusion equation of gas flow is a stealth function of pressure. For liquid flow, a series of standard log-log type curves of pressure transients were plotted and nonlinear transient flow characteristics were analyzed. Qualitative and quantitative analyses were used to compare the solutions of the linear and nonlinear models. The effect of nonlinearity upon pressure transients should not be ignored. For gas flow, pressure transients were simulated and compared with oil flow under the same formation and well conditions, resulting in the conclusion that, under the same volume rate production, oil wells demand larger pressure drops than gas wells. Comparisons between theoretical data and field data show that nonlinear models will describe fluid flow in underground formations realistically and accurately.

Attractors for a class of doubly nonlinear parabolic systems

Directory of Open Access Journals (Sweden)

Hamid El Ouardi

2006-03-01

Full Text Available In this paper, we establish the existence and boundedness of solutions of a doubly nonlinear parabolic system. We also obtain the existence of a global attractor and the regularity property for this attractor in $\\left[ L^{\\infty }(\\Omega \\right] ^{2}$ and ${\\prod_{i=1}^{2}}{B_{\\infty }^{1+\\sigma_{i},p_{i}}( \\Omega } $.

Nonlinear Kalman Filtering in Affine Term Structure Models

DEFF Research Database (Denmark)

Christoffersen, Peter; Dorion, Christian; Jacobs, Kris

When the relationship between security prices and state variables in dynamic term structure models is nonlinear, existing studies usually linearize this relationship because nonlinear fi…ltering is computationally demanding. We conduct an extensive investigation of this linearization and analyze...... the potential of the unscented Kalman …filter to properly capture nonlinearities. To illustrate the advantages of the unscented Kalman …filter, we analyze the cross section of swap rates, which are relatively simple non-linear instruments, and cap prices, which are highly nonlinear in the states. An extensive...

Adoção do Six Sigma pelas 500 Maiores Empresas em Portugal

OpenAIRE

Conceição, A.; Major, M.

2011-01-01

The Six Sigma had its genesis in big industrial companies that have implemented it as a tool for reducing defects. The initial success encouraged its application in other areas and we see today successful implementation in other sectors such as services, and within their own organizations in other areas beyond production, setting; this has contributed to Six Sigma being recognized as a new management model. In order to determine the extent to which Six Sigma is present in Portuguese companies...

Nonlinear Growth Models in M"plus" and SAS

Science.gov (United States)

Grimm, Kevin J.; Ram, Nilam

2009-01-01

Nonlinear growth curves or growth curves that follow a specified nonlinear function in time enable researchers to model complex developmental patterns with parameters that are easily interpretable. In this article we describe how a variety of sigmoid curves can be fit using the M"plus" structural modeling program and the nonlinear…

Six sigma quality for fuel manufacturing

International Nuclear Information System (INIS)

Gabbani, M.D.; Onderwater, T.

1997-01-01

It is widely recognized that operational performance in product manufacturing is largely determined by understanding and maintaining process capability. By definition, Six Sigma is a statistical unit of measure reflecting process capability that yields less' than 6.8 defects per million product produced. Statistically, this translates into obtaining a long term manufacturing process capability of ± 4.5 standard deviations about the mean within specification limits. The heart of the Six Sigma program developed by the Six Sigma Academy is what we refer to as the Breakthrough Strategy. This rigorous analytical methodology is the driving force in obtaining world class performance of Six Sigma. The methodology applies statistical and practical tools in resolving a problem or improving a product or process. The application of Six Sigma focuses on attacking process input variables (independent) rather than the output variables. Focusing on these independent variables (temperature, power, force, etc.) and the variation in the end product they create, enables us to get to the root of the problem rather than react to the symptoms of the problem. In this manner we prevent defects from occurring rather than inspecting and monitoring the product. Why the need for such an ambitious program? It is estimated that the cost of failure (rework, scrap, warranties, etc.) can be as high as 15% of sales for companies typically operating at 3-4 sigma. In achieving Six Sigma, costs of failure are typically less than 5%. The thought of reducing business costs while achieving the recognition of being our customer's premier choice provides enormous incentive to reach such status. (author)

Nonlinear Dynamic Models in Advanced Life Support

Science.gov (United States)

Jones, Harry

2002-01-01

To facilitate analysis, ALS systems are often assumed to be linear and time invariant, but they usually have important nonlinear and dynamic aspects. Nonlinear dynamic behavior can be caused by time varying inputs, changes in system parameters, nonlinear system functions, closed loop feedback delays, and limits on buffer storage or processing rates. Dynamic models are usually cataloged according to the number of state variables. The simplest dynamic models are linear, using only integration, multiplication, addition, and subtraction of the state variables. A general linear model with only two state variables can produce all the possible dynamic behavior of linear systems with many state variables, including stability, oscillation, or exponential growth and decay. Linear systems can be described using mathematical analysis. Nonlinear dynamics can be fully explored only by computer simulations of models. Unexpected behavior is produced by simple models having only two or three state variables with simple mathematical relations between them. Closed loop feedback delays are a major source of system instability. Exceeding limits on buffer storage or processing rates forces systems to change operating mode. Different equilibrium points may be reached from different initial conditions. Instead of one stable equilibrium point, the system may have several equilibrium points, oscillate at different frequencies, or even behave chaotically, depending on the system inputs and initial conditions. The frequency spectrum of an output oscillation may contain harmonics and the sums and differences of input frequencies, but it may also contain a stable limit cycle oscillation not related to input frequencies. We must investigate the nonlinear dynamic aspects of advanced life support systems to understand and counter undesirable behavior.

Nonlinear Eddy Viscosity Models applied to Wind Turbine Wakes

DEFF Research Database (Denmark)

Laan, van der, Paul Maarten; Sørensen, Niels N.; Réthoré, Pierre-Elouan

2013-01-01

The linear k−ε eddy viscosity model and modified versions of two existing nonlinear eddy viscosity models are applied to single wind turbine wake simulations using a Reynolds Averaged Navier-Stokes code. Results are compared with field wake measurements. The nonlinear models give better results...

Topological approximation of the nonlinear Anderson model

Science.gov (United States)

Milovanov, Alexander V.; Iomin, Alexander

2014-06-01

We study the phenomena of Anderson localization in the presence of nonlinear interaction on a lattice. A class of nonlinear Schrödinger models with arbitrary power nonlinearity is analyzed. We conceive the various regimes of behavior, depending on the topology of resonance overlap in phase space, ranging from a fully developed chaos involving Lévy flights to pseudochaotic dynamics at the onset of delocalization. It is demonstrated that the quadratic nonlinearity plays a dynamically very distinguished role in that it is the only type of power nonlinearity permitting an abrupt localization-delocalization transition with unlimited spreading already at the delocalization border. We describe this localization-delocalization transition as a percolation transition on the infinite Cayley tree (Bethe lattice). It is found in the vicinity of the criticality that the spreading of the wave field is subdiffusive in the limit t →+∞. The second moment of the associated probability distribution grows with time as a power law ∝ tα, with the exponent α =1/3 exactly. Also we find for superquadratic nonlinearity that the analog pseudochaotic regime at the edge of chaos is self-controlling in that it has feedback on the topology of the structure on which the transport processes concentrate. Then the system automatically (without tuning of parameters) develops its percolation point. We classify this type of behavior in terms of self-organized criticality dynamics in Hilbert space. For subquadratic nonlinearities, the behavior is shown to be sensitive to the details of definition of the nonlinear term. A transport model is proposed based on modified nonlinearity, using the idea of "stripes" propagating the wave process to large distances. Theoretical investigations, presented here, are the basis for consistency analysis of the different localization-delocalization patterns in systems with many coupled degrees of freedom in association with the asymptotic properties of the

A non-linear state space approach to model groundwater fluctuations

NARCIS (Netherlands)

Berendrecht, W.L.; Heemink, A.W.; Geer, F.C. van; Gehrels, J.C.

2006-01-01

A non-linear state space model is developed for describing groundwater fluctuations. Non-linearity is introduced by modeling the (unobserved) degree of water saturation of the root zone. The non-linear relations are based on physical concepts describing the dependence of both the actual

Augmented twin-nonlinear two-box behavioral models for multicarrier LTE power amplifiers.

Science.gov (United States)

Hammi, Oualid

2014-01-01

A novel class of behavioral models is proposed for LTE-driven Doherty power amplifiers with strong memory effects. The proposed models, labeled augmented twin-nonlinear two-box models, are built by cascading a highly nonlinear memoryless function with a mildly nonlinear memory polynomial with cross terms. Experimental validation on gallium nitride based Doherty power amplifiers illustrates the accuracy enhancement and complexity reduction achieved by the proposed models. When strong memory effects are observed, the augmented twin-nonlinear two-box models can improve the normalized mean square error by up to 3 dB for the same number of coefficients when compared to state-of-the-art twin-nonlinear two-box models. Furthermore, the augmented twin-nonlinear two-box models lead to the same performance as previously reported twin-nonlinear two-box models while requiring up to 80% less coefficients.

Excited scalar and pseudoscalar mesons in the extended linear sigma model

Energy Technology Data Exchange (ETDEWEB)

Parganlija, Denis [Technische Universitaet Wien, Institut fuer Theoretische Physik, Vienna (Austria); Giacosa, Francesco [Jan Kochanowski University, Institute of Physics, Kielce (Poland); Johann Wolfgang Goethe-Universitaet, Institut fuer Theoretische Physik, Frankfurt am Main (Germany)

2017-07-15

We present an in-depth study of masses and decays of excited scalar and pseudoscalar anti qq states in the Extended Linear Sigma Model (eLSM). The model also contains ground-state scalar, pseudoscalar, vector and axial-vector mesons. The main objective is to study the consequences of the hypothesis that the f{sub 0}(1790) resonance, observed a decade ago by the BES Collaboration and recently by LHCb, represents an excited scalar quarkonium. In addition we also analyse the possibility that the new a{sub 0}(1950) resonance, observed recently by BABAR, may also be an excited scalar state. Both hypotheses receive justification in our approach although there appears to be some tension between the simultaneous interpretation of f{sub 0}(1790)/a{sub 0}(1950) and pseudoscalar mesons η(1295), π(1300), η(1440) and K(1460) as excited anti qq states. (orig.)

[Reducing patient waiting time for the outpatient phlebotomy service using six sigma].

Science.gov (United States)

Kim, Yu Kyung; Song, Kyung Eun; Lee, Won Kil

2009-04-01

One of the challenging issues of the outpatient phlebotomy services at most hospitals is that patients have a long wait. The outpatient phlebotomy team of Kyungpook National University Hospital applied six sigma breakthrough methodologies to reduce the patient waiting time. The DMAIC (Define, Measure, Analyze, Improve, and Control) model was employed to approach the project. Two hundred patients visiting the outpatient phlebotomy section were asked to answer the questionnaires at inception of the study to ascertain root causes. After correction, we surveyed 285 patients for same questionnaires again to follow-up the effects. A defect was defined as extending patient waiting time so long and at the beginning of the project, the performance level was 2.61 sigma. Using fishbone diagram, all the possible reasons for extending patient waiting time were captured, and among them, 16 causes were proven to be statistically significant. Improvement plans including a new receptionist, automatic specimen transport system, and adding one phlebotomist were put into practice. As a result, the number of patients waited more than 5 min significantly decreased, and the performance level reached 3.0 sigma in December 2007 and finally 3.35 sigma in July 2008. Applying the six sigma, the performance level of waiting times for blood drawing exceeding five minutes were improved from 2.61 sigma to 3.35 sigma.

A nonlinear model for AC induced corrosion

Directory of Open Access Journals (Sweden)

N. Ida

2012-09-01

Full Text Available The modeling of corrosion poses particular difficulties. The understanding of corrosion as an electrochemical process has led to simple capacitive-resistive models that take into account the resistance of the electrolytic cell and the capacitive effect of the surface potential at the interface between conductors and the electrolyte. In some models nonlinear conduction effects have been added to account for more complex observed behavior. While these models are sufficient to describe the behavior in systems with cathodic protection, the behavior in the presence of induced AC currents from power lines and from RF sources cannot be accounted for and are insufficient to describe the effects observed in the field. Field observations have shown that a rectifying effect exists that affects the cathodic protection potential and this effect is responsible for corrosion in the presence of AC currents. The rectifying effects of the metal-corrosion interface are totally missing from current models. This work proposes a nonlinear model based on finite element analysis that takes into account the nonlinear behavior of the metal-oxide interface and promises to improve modeling by including the rectification effects at the interface.

Six sigma for revenue retrieval.

Science.gov (United States)

Plonien, Cynthia

2013-01-01

Deficiencies in revenue retrieval due to failures in obtaining charges have contributed to a negative bottom line for numerous hospitals. Improving documentation practices through a Six Sigma process improvement initiative can minimize opportunities for errors through reviews and instill structure for compliance and consistency. Commitment to the Six Sigma principles with continuous monitoring of outcomes and constant communication of results to departments, management, and payers is a strong approach to reducing the financial impact of denials on an organization's revenues and expenses. Using Six Sigma tools can help improve the organization's financial performance not only for today, but also for health care's uncertain future.

6 Sigma project advance

International Nuclear Information System (INIS)

2002-12-01

This book deals with 6 sigma project advance which introduces 6 sigma project in Changwon special steel, how is failure accepted? CTQ selection which is starting line, definition of performance standard, measurement system check on reliability of measurement data, check of process capacity for current level, establishment of target, optimal design and performance of application, practice of management system for maintain of improved result, CTQ selection, check of measurement system and practice of management system.

Lean sigma--will it work for healthcare?

Science.gov (United States)

Bahensky, James A; Roe, Janet; Bolton, Romy

2005-01-01

The manufacturing industry has been using Lean Sigma for years in pursuit of continuous improvement to obtain a competitive advantage. The objectives of these efforts are to use the Lean techniques for reducing cycle times and the Six Sigma concepts for reducing product defects. The Iowa Business Council with several advocates worked with the University of Iowa Hospital and Clinics (UIHC) and two other Iowa hospitals to determine whether Lean Sigma is adaptable in healthcare. A team of 15 people at UIHC used the Kaizen Breakthrough Methodology over a five-day period in an aggressive identification and elimination of non-value added activities in Radiology CT scanning. The results exceeded the initial project objectives and indicated that Lean Sigma is applicable in healthcare. Overall, the Lean Sigma project increased revenue by approximately $750,000 per year. The Kaizen process proved to be successful and interesting. Within three days, the team installed new work flow processes. This implementation-oriented approach is what differentiates Lean Sigma from other quality improvement processes.

Comparison of a nonlinear dynamic model of a piping system to test data

International Nuclear Information System (INIS)

Blakely, K.D.; Howard, G.E.; Walton, W.B.; Johnson, B.A.; Chitty, D.E.

1983-01-01

Response of a nonlinear finite element model of the Heissdampfreaktor recirculation piping loop (URL) was compared to measured data, representing the physical benchmarking of a nonlinear model. Analysis-test comparisons of piping response are presented for snapback tests that induced extreme nonlinear behavior of the URL system. Nonlinearities in the system are due to twelve swaybraces (pipe supports) that possessed nonlinear force-deflection characteristics. These nonlinearities distorted system damping estimates made by using the half-power bandwidth method on Fourier transforms of measured accelerations, with the severity of distortion increasing with increasing degree of nonlinearity. Time domain methods, which are not so severely affected by the presence of nonlinearities, were used to compute system damping ratios. Nonlinear dynamic analyses were accurately and efficiently performed using the pseudo-force technique and the finite element program MSC/NASTRAN. Measured damping was incorporated into the model for snapback simulations. Acceleration time histories, acceleration Fourier transforms, and swaybrace force time histories of the nonlinear model, plus several linear models, were compared to test measurements. The nonlinear model predicted three-fourths of the measured peak accelerations to within 50%, half of the accelerations to within 25%, and one-fifth of the accelerations to within 10%. This nonlinear model predicted accelerations (in the time and frequency domains) and swaybrace forces much better than did any of the linear models, demonstrating the increased accuracy resulting from properly simulating nonlinear support behavior. In addition, earthquake response comparisons were made between the experimentally validated nonlinear model and a linear model. Significantly lower element stresses were predicted for the nonlinear model, indicating the potential usefulness of nonlinear simulations in piping design assessments. (orig.)

Non Abelian T-duality in Gauged Linear Sigma Models

Science.gov (United States)

Bizet, Nana Cabo; Martínez-Merino, Aldo; Zayas, Leopoldo A. Pando; Santos-Silva, Roberto

2018-04-01

Abelian T-duality in Gauged Linear Sigma Models (GLSM) forms the basis of the physical understanding of Mirror Symmetry as presented by Hori and Vafa. We consider an alternative formulation of Abelian T-duality on GLSM's as a gauging of a global U(1) symmetry with the addition of appropriate Lagrange multipliers. For GLSMs with Abelian gauge groups and without superpotential we reproduce the dual models introduced by Hori and Vafa. We extend the construction to formulate non-Abelian T-duality on GLSMs with global non-Abelian symmetries. The equations of motion that lead to the dual model are obtained for a general group, they depend in general on semi-chiral superfields; for cases such as SU(2) they depend on twisted chiral superfields. We solve the equations of motion for an SU(2) gauged group with a choice of a particular Lie algebra direction of the vector superfield. This direction covers a non-Abelian sector that can be described by a family of Abelian dualities. The dual model Lagrangian depends on twisted chiral superfields and a twisted superpotential is generated. We explore some non-perturbative aspects by making an Ansatz for the instanton corrections in the dual theories. We verify that the effective potential for the U(1) field strength in a fixed configuration on the original theory matches the one of the dual theory. Imposing restrictions on the vector superfield, more general non-Abelian dual models are obtained. We analyze the dual models via the geometry of their susy vacua.

Background field method for nonlinear σ-model in stochastic quantization

International Nuclear Information System (INIS)

Nakazawa, Naohito; Ennyu, Daiji

1988-01-01

We formulate the background field method for the nonlinear σ-model in stochastic quantization. We demonstrate a one-loop calculation for a two-dimensional non-linear σ-model on a general riemannian manifold based on our formulation. The formulation is consistent with the known results in ordinary quantization. As a simple application, we also analyse the multiplicative renormalization of the O(N) nonlinear σ-model. (orig.)

Modeling Non-Linear Material Properties in Composite Materials

Science.gov (United States)

2016-06-28

Technical Report ARWSB-TR-16013 MODELING NON-LINEAR MATERIAL PROPERTIES IN COMPOSITE MATERIALS Michael F. Macri Andrew G...REPORT TYPE Technical 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE MODELING NON-LINEAR MATERIAL PROPERTIES IN COMPOSITE MATERIALS ...systems are increasingly incorporating composite materials into their design. Many of these systems subject the composites to environmental conditions

Topics in conformal invariance and generalized sigma models

International Nuclear Information System (INIS)

Bernardo, L.M.; Lawrence Berkeley National Lab., CA

1997-05-01

This thesis consists of two different parts, having in common the fact that in both, conformal invariance plays a central role. In the first part, the author derives conditions for conformal invariance, in the large N limit, and for the existence of an infinite number of commuting classical conserved quantities, in the Generalized Thirring Model. The treatment uses the bosonized version of the model. Two different approaches are used to derive conditions for conformal invariance: the background field method and the Hamiltonian method based on an operator algebra, and the agreement between them is established. The author constructs two infinite sets of non-local conserved charges, by specifying either periodic or open boundary conditions, and he finds the Poisson Bracket algebra satisfied by them. A free field representation of the algebra satisfied by the relevant dynamical variables of the model is also presented, and the structure of the stress tensor in terms of free fields (and free currents) is studied in detail. In the second part, the author proposes a new approach for deriving the string field equations from a general sigma model on the world sheet. This approach leads to an equation which combines some of the attractive features of both the renormalization group method and the covariant beta function treatment of the massless excitations. It has the advantage of being covariant under a very general set of both local and non-local transformations in the field space. The author applies it to the tachyon, massless and first massive level, and shows that the resulting field equations reproduce the correct spectrum of a left-right symmetric closed bosonic string

Stationary solutions of multicomponent chiral and gauge models

International Nuclear Information System (INIS)

Chudnovsky, D.V.; Chudnovsky, G.V.

1979-01-01

The authors examine stationary solutions of completely integrable systems in (x, t) dimensions having infinitely many components. Among the cases under investigation are: (1) the infinite-component non-linear Schroedinger equation; (2) infinite component CPsup(Ω) or SU(N) sigma-models; (3) general gauge and chiral completely integrable systems. (Auth.)

A deep belief network with PLSR for nonlinear system modeling.

Science.gov (United States)

Qiao, Junfei; Wang, Gongming; Li, Wenjing; Li, Xiaoli

2017-10-31

Nonlinear system modeling plays an important role in practical engineering, and deep learning-based deep belief network (DBN) is now popular in nonlinear system modeling and identification because of the strong learning ability. However, the existing weights optimization for DBN is based on gradient, which always leads to a local optimum and a poor training result. In this paper, a DBN with partial least square regression (PLSR-DBN) is proposed for nonlinear system modeling, which focuses on the problem of weights optimization for DBN using PLSR. Firstly, unsupervised contrastive divergence (CD) algorithm is used in weights initialization. Secondly, initial weights derived from CD algorithm are optimized through layer-by-layer PLSR modeling from top layer to bottom layer. Instead of gradient method, PLSR-DBN can determine the optimal weights using several PLSR models, so that a better performance of PLSR-DBN is achieved. Then, the analysis of convergence is theoretically given to guarantee the effectiveness of the proposed PLSR-DBN model. Finally, the proposed PLSR-DBN is tested on two benchmark nonlinear systems and an actual wastewater treatment system as well as a handwritten digit recognition (nonlinear mapping and modeling) with high-dimension input data. The experiment results show that the proposed PLSR-DBN has better performances of time and accuracy on nonlinear system modeling than that of other methods. Copyright © 2017 Elsevier Ltd. All rights reserved.

Application of Six Sigma Robust Optimization in Sheet Metal Forming

International Nuclear Information System (INIS)

Li, Y.Q.; Cui, Z.S.; Ruan, X.Y.; Zhang, D.J.

2005-01-01

Numerical simulation technology and optimization method have been applied in sheet metal forming process to improve design quality and shorten design cycle. While the existence of fluctuation in design variables or operation condition has great influence on the quality. In addition to that, iterative solution in numerical simulation and optimization usually take huge computational time or endure expensive experiment cost In order to eliminate effect of perturbations in design and improve design efficiency, a CAE-based six sigma robust design method is developed in this paper. In the six sigma procedure for sheet metal forming, statistical technology and dual response surface approximate model as well as algorithm of 'Design for Six Sigma (DFSS)' are integrated together to perform reliability optimization and robust improvement. A deep drawing process of a rectangular cup is taken as an example to illustrate the method. The optimization solutions show that the proposed optimization procedure not only improves significantly the reliability and robustness of the forming quality, but also increases optimization efficiency with approximate model

Quasilinear Extreme Learning Machine Model Based Internal Model Control for Nonlinear Process

Directory of Open Access Journals (Sweden)

Dazi Li

2015-01-01

Full Text Available A new strategy for internal model control (IMC is proposed using a regression algorithm of quasilinear model with extreme learning machine (QL-ELM. Aimed at the chemical process with nonlinearity, the learning process of the internal model and inverse model is derived. The proposed QL-ELM is constructed as a linear ARX model with a complicated nonlinear coefficient. It shows some good approximation ability and fast convergence. The complicated coefficients are separated into two parts. The linear part is determined by recursive least square (RLS, while the nonlinear part is identified through extreme learning machine. The parameters of linear part and the output weights of ELM are estimated iteratively. The proposed internal model control is applied to CSTR process. The effectiveness and accuracy of the proposed method are extensively verified through numerical results.

Theoretical models for ultrashort electromagnetic pulse propagation in nonlinear metamaterials

International Nuclear Information System (INIS)

Wen, Shuangchun; Xiang, Yuanjiang; Dai, Xiaoyu; Tang, Zhixiang; Su, Wenhua; Fan, Dianyuan

2007-01-01

A metamaterial (MM) differs from an ordinary optical material mainly in that it has a dispersive magnetic permeability and offers greatly enhanced design freedom to alter the linear and nonlinear properties. This makes it possible for us to control the propagation of ultrashort electromagnetic pulses at will. Here we report on generic features of ultrashort electromagnetic pulse propagation and demonstrate the controllability of both the linear and nonlinear parameters of models for pulse propagation in MMs. First, we derive a generalized system of coupled three-dimensional nonlinear Schroedinger equations (NLSEs) suitable for few-cycle pulse propagation in a MM with both nonlinear electric polarization and nonlinear magnetization. The coupled equations recover previous models for pulse propagation in both ordinary material and a MM under the same conditions. Second, by using the coupled NLSEs in the Drude dispersive model as an example, we identify the respective roles of the dispersive electric permittivity and magnetic permeability in ultrashort pulse propagation and disclose some additional features of pulse propagation in MMs. It is shown that, for linear propagation, the sign and magnitude of space-time focusing can be controlled through adjusting the linear dispersive permittivity and permeability. For nonlinear propagation, the linear dispersive permittivity and permeability are incorporated into the nonlinear magnetization and nonlinear polarization, respectively, resulting in controllable magnetic and electric self-steepening effects and higher-order dispersively nonlinear terms in the propagation models

Bulanık Analitik Hiyerarşi Süreci ile Uygun Altı Sigma Metodolojisinin Seçimi(The Selection of Appropriate Six Sigma Methodology by Using Fuzzy Analytical Hierarchy Process

Directory of Open Access Journals (Sweden)

Çiğdem SOFYALIOĞLU

2009-01-01

Full Text Available Six sigma is considered as a business strategy that depends on the continuous improvement approach that tries to eliminate the process variability and aims to decrease the scrap in business processes by using statistical tools and techniques. In this study, first the differences between Six Sigma Improvement Model and Design for Six Sigma will be given and then the proper methodology for the business in order to achieve its goals will be determined by using fuzzy AHP which is one of the multicriteria decision making techniques.

Measurement of the $\\Sigma \\pi$ photoproduction line shapes near the $\\Lambda(1405)$

Energy Technology Data Exchange (ETDEWEB)

Moriya, K; Adhikari, K P; Adikaram, D; Aghasyan, M; Anderson, M D; Anefalos Pereira, S; Ball, J; Baltzell, N A; Battaglieri, M; Batourine, V; Bedlinskiy, I; Bellis, M; Biselli, A S; Bono, J; Boiarinov, S; Briscoe, W J; Burkert, V D; Carman, D S; Celentano, A; Chandavar, S; Charles, G; Cole, P L; Collins, P; Crede, V; D& #x27; Angelo, A; Dashyan, N; De Sanctis, E; De Vita, R; Deur, A; Dey, B; Djalali, C; Doughty, R; Dupre, R; Egiyan, H; El Fassi, L; Eugenio, P; Fedotov, G; Fegan, S; Fersch, R; Fleming, J A; Gevorgyan, N; Gilfoyle, G P; Giovanetti, K L; Girod, F X; Goetz, J T; Gohn, W; Golovatch, E; Gothe, R W; Griffioen, K A; Guidal, M; Hafidi, K; Hakobyan, H; Hanretty, C; Harrison, N; Heddle, D; Hicks, K; Ho, D; Holtrop, M; Hyde, C E; Ilieva, Y; Ireland, D G; Ishkhanov, B S; Isupov, E L; Jo, H S; Keller, D; Khandaker, M; Khertarpal, P; Kim, A; Kim, W; Klein, A; Klein, F J; Koirala, S; Kubarovsky, A; Kubarovsky, V; Kuleshov, S V; Kvaltine, N D; Livingston, K; Lu, H Y; MacGregor, I.J. D; Markov, N; Mayer, M; McCracken, M; McKinnon, B; Mestayer, M D; Meyer, C A; Mirazita, M; Mineeva, T; Mokeev, V; Montgomery, R A; Munevar, E; Munoz Camacho, C; Nadel-Turonski, P; Nasseripour, R; Nepali, C S; Niccolai, S; Niculescu, G; Niculescu, I; Osipenko, M; Ostrovidov, A I; Pappalardo, L L; Paremuzyan, R; Park, K; Park, S; Pasyuk, E; Phelps, E; Phillips, J J; Pisano, S; Pivnyuk, N; Pogorelko, O; Pozdniakov, S; Price, J W; Procureur, S; Protopopescu, D; Rimal, D; Ripani, M; Ritchie, B G; Rosner, G; Rossi, P; Sabatio, F; Saini, M S; Salgado, C; Schott, D; Seder, E; Seraydaryan, H; Sharabian, Y G; Smith, E S; Smith, G D; Sober, D I; Stepanyan, S S; Stepanyan, S; Stoler, P; Strakovsky, I I; Strauch, S; Taiuti, M; Tang, W; Taylor, S; Taylor, C E; Tian, Ye; Tkachenko, S; Torayev, B; Ungaro, M; Vernarsky, B; Vlassov, A V; Voskanyan, H; Voutier, E; Walford, N K; Watts, D P

2013-03-01

The reaction {gamma} + p -> K{sup +} + {Sigma} + {p}i was used to determine the invariant mass distributions or "line shapes" of the {Sigma}{sup +} {pi}{sup -}, {Sigma}{sup -} {pi}{sup +} and {Sigma}{sup 0} {pi}{sup 0} final states, from threshold at 1328 MeV/c^2 through the mass range of the {Lambda}(1405) and the {Lambda}(1520). The measurements were made with the CLAS system at Jefferson Lab using tagged real photons, for center-of-mass energies 1.95 < W < 2.85 GeV. The three mass distributions differ strongly in the vicinity of the I=0 {Lambda}(1405), indicating the presence of substantial I=1 strength in the reaction. Background contributions to the data from the {Sigma}{sup 0}(1385) and from K* {Sigma} production were studied and shown to have negligible influence. To separate the isospin amplitudes, Breit-Wigner model fits were made that included channel-coupling distortions due to the Nkbar threshold. A best fit to all the data was obtained after including a phenomenological I=1, J{sup P} = 1/2{sup -} amplitude with a centroid at 1394\\pm20 MeV/c^2 and a second I=1 amplitude at 1413\\pm10 MeV/c^2. The centroid of the I=0 {Lambda}(1405) strength was found at the {Sigma} {pi} threshold, with the observed shape determined largely by channel-coupling, leading to an apparent overall peak near 1405 MeV/c^2.

Preisach hysteresis model for non-linear 2D heat diffusion

International Nuclear Information System (INIS)

Jancskar, Ildiko; Ivanyi, Amalia

2006-01-01

This paper analyzes a non-linear heat diffusion process when the thermal diffusivity behaviour is a hysteretic function of the temperature. Modelling this temperature dependence, the discrete Preisach algorithm as general hysteresis model has been integrated into a non-linear multigrid solver. The hysteretic diffusion shows a heating-cooling asymmetry in character. The presented type of hysteresis speeds up the thermal processes in the modelled systems by a very interesting non-linear way

Robust model predictive control for constrained continuous-time nonlinear systems

Science.gov (United States)

Sun, Tairen; Pan, Yongping; Zhang, Jun; Yu, Haoyong

2018-02-01

In this paper, a robust model predictive control (MPC) is designed for a class of constrained continuous-time nonlinear systems with bounded additive disturbances. The robust MPC consists of a nonlinear feedback control and a continuous-time model-based dual-mode MPC. The nonlinear feedback control guarantees the actual trajectory being contained in a tube centred at the nominal trajectory. The dual-mode MPC is designed to ensure asymptotic convergence of the nominal trajectory to zero. This paper extends current results on discrete-time model-based tube MPC and linear system model-based tube MPC to continuous-time nonlinear model-based tube MPC. The feasibility and robustness of the proposed robust MPC have been demonstrated by theoretical analysis and applications to a cart-damper springer system and a one-link robot manipulator.

Modelling female fertility traits in beef cattle using linear and non-linear models.

Science.gov (United States)

Naya, H; Peñagaricano, F; Urioste, J I

2017-06-01

Female fertility traits are key components of the profitability of beef cattle production. However, these traits are difficult and expensive to measure, particularly under extensive pastoral conditions, and consequently, fertility records are in general scarce and somehow incomplete. Moreover, fertility traits are usually dominated by the effects of herd-year environment, and it is generally assumed that relatively small margins are kept for genetic improvement. New ways of modelling genetic variation in these traits are needed. Inspired in the methodological developments made by Prof. Daniel Gianola and co-workers, we assayed linear (Gaussian), Poisson, probit (threshold), censored Poisson and censored Gaussian models to three different kinds of endpoints, namely calving success (CS), number of days from first calving (CD) and number of failed oestrus (FE). For models involving FE and CS, non-linear models overperformed their linear counterparts. For models derived from CD, linear versions displayed better adjustment than the non-linear counterparts. Non-linear models showed consistently higher estimates of heritability and repeatability in all cases (h 2  linear models; h 2  > 0.23 and r > 0.24, for non-linear models). While additive and permanent environment effects showed highly favourable correlations between all models (>0.789), consistency in selecting the 10% best sires showed important differences, mainly amongst the considered endpoints (FE, CS and CD). In consequence, endpoints should be considered as modelling different underlying genetic effects, with linear models more appropriate to describe CD and non-linear models better for FE and CS. © 2017 Blackwell Verlag GmbH.

Design Principles of A Sigma-delta Flux-gate Magnetometer

Science.gov (United States)

Magnes, W.; Valavanoglou, A.; Pierce, D.; Frank, A.; Schwingenschuh, K.

A state-of-the-art flux-gate magnetometer is characterised by magnetic field resolution of several pT in a wide frequency range, low power consumption, low weight and high robustness. Therefore, flux-gate magnetometers are frequently used for ground-based Earth's field observation as well as for measurements aboard scientific space missions. But both traditional analogue and recently developed digital flux-gate magnetometers need low power and high-resolution analogue-to-digital converters for signal quan- tization. The disadvantage of such converters is the low radiation hardness. This fact has led to the idea of combining a traditional analogue flux-gate regulation circuit with that of a discretely realized sigma-delta converter in order to get a radiation hard and further miniaturized magnetometer. The name sigma-delta converter is derived from putting an integrator in front of a 1-bit delta modulator which forms the sigma-delta loop. It is followed by a digital decimation filter realized in a field-programmable gate array (FPGA). The flux-gate regulation and the sigma-delta loop are quite similar in the way of realizing the integrator and feedback circuit, which makes it easy to com- bine these two systems. The presented talk deals with the design principles and the results of a first bread board model.

Nonlinear Dynamic Modeling of Langevin-Type Piezoelectric Transducers

Directory of Open Access Journals (Sweden)

Nicolás Peréz Alvarez

2015-11-01

Full Text Available Langevin transducers are employed in several applications, such as power ultrasound systems, naval hydrophones, and high-displacement actuators. Nonlinear effects can influence their performance, especially at high vibration amplitude levels. These nonlinear effects produce variations in the resonant frequency, harmonics of the excitation frequency, in addition to loss of symmetry in the frequency response and “frequency domain hysteresis”. In this context, this paper presents a simplified nonlinear dynamic model of power ultrasound transducers requiring only two parameters for simulating the most relevant nonlinear effects. One parameter reproduces the changes in the resonance frequency and the other introduces the dependence of the frequency response on the history of the system. The piezoelectric constitutive equations are extended by a linear dependence of the elastic constant on the mechanical displacement amplitude. For introducing the frequency hysteresis, the elastic constant is computed by combining the current value of the mechanical amplitude with the previous state amplitude. The model developed in this work is applied for predicting the dynamic responses of a 26 kHz ultrasonic transducer. The comparison of theoretical and experimental responses, obtained at several input voltages around the tuned frequency, shows a good agreement, indicating that the model can accurately describe the transducer nonlinear behavior.

The C-Terminal RpoN Domain of sigma54 Forms an unpredictedHelix-Turn-Helix Motif Similar to domains of sigma70

Energy Technology Data Exchange (ETDEWEB)

Doucleff, Michaeleen; Malak, Lawrence T.; Pelton, Jeffrey G.; Wemmer, David E.

2005-11-01

The ''{delta}'' subunit of prokaryotic RNA-polymerase allows gene-specific transcription initiation. Two {sigma} families have been identified, {sigma}{sup 70} and {sigma}{sup 54}, which use distinct mechanisms to initiate transcription and share no detectable sequence homology. Although the {sigma}{sup 70}-type factors have been well characterized structurally by x-ray crystallography, no high-resolution structural information is available for the {sigma}{sup 54}-type factors. Here we present the NMR derived structure of the C-terminal domain of {sigma}{sup 54} from Aquifex aeolicus. This domain (Thr323 to Gly389), which contains the highly conserved RpoN box sequence, consists of a poorly structured N-terminal tail followed by a three-helix bundle, which is surprisingly similar to domains of the {sigma}{sup 70}-type proteins. Residues of the RpoN box, which have previously been shown to be critical for DNA binding, form the second helix of an unpredicted helix-turn-helix motif. This structure's homology with other DNA binding proteins, combined with previous biochemical data, suggest how the C-terminal domain of {sigma}{sup 54} binds to DNA.

Supersymmetric quantum corrections and Poisson-Lie T-duality

International Nuclear Information System (INIS)

Assaoui, F.; Lhallabi, T.; Abdus Salam International Centre for Theoretical Physics, Trieste

2000-07-01

The quantum actions of the (4,4) supersymmetric non-linear sigma model and its dual in the Abelian case are constructed by using the background superfield method. The propagators of the quantum superfield and its dual and the gauge fixing actions of the original and dual (4,4) supersymmetric sigma models are determined. On the other hand, the BRST transformations are used to obtain the quantum dual action of the (4,4) supersymmetric nonlinear sigma model in the sense of Poisson-Lie T-duality. (author)

Application of Six Sigma towards improving surgical outcomes.

Science.gov (United States)

Shukla, P J; Barreto, S G; Nadkarni, M S

2008-01-01

Six Sigma is a 'process excellence' tool targeting continuous improvement achieved by providing a methodology for improving key steps of a process. It is ripe for application into health care since almost all health care processes require a near-zero tolerance for mistakes. The aim of this study is to apply the Six Sigma methodology into a clinical surgical process and to assess the improvement (if any) in the outcomes and patient care. The guiding principles of Six Sigma, namely DMAIC (Define, Measure, Analyze, Improve, Control), were used to analyze the impact of double stapling technique (DST) towards improving sphincter preservation rates for rectal cancer. The analysis using the Six Sigma methodology revealed a Sigma score of 2.10 in relation to successful sphincter preservation. This score demonstrates an improvement over the previous technique (73% over previous 54%). This study represents one of the first clinical applications of Six Sigma in the surgical field. By understanding, accepting, and applying the principles of Six Sigma, we have an opportunity to transfer a very successful management philosophy to facilitate the identification of key steps that can improve outcomes and ultimately patient safety and the quality of surgical care provided.

Generic Lean Six Sigma project definitions in publishing

NARCIS (Netherlands)

de Koning, H.; Does, R.J.M.M.; Groen, A.; Kemper, B.P.H.

2010-01-01

Purpose - Many companies in the publishing industry are facing the task of developing new business models and becoming more efficient and effective in execution. Lean Six Sigma (LSS) is a unified framework for systematically developing efficiency and quality improvements; it can help realize

Perturbation analysis of nonlinear matrix population models

Directory of Open Access Journals (Sweden)

Hal Caswell

2008-03-01

Full Text Available Perturbation analysis examines the response of a model to changes in its parameters. It is commonly applied to population growth rates calculated from linear models, but there has been no general approach to the analysis of nonlinear models. Nonlinearities in demographic models may arise due to density-dependence, frequency-dependence (in 2-sex models, feedback through the environment or the economy, and recruitment subsidy due to immigration, or from the scaling inherent in calculations of proportional population structure. This paper uses matrix calculus to derive the sensitivity and elasticity of equilibria, cycles, ratios (e.g. dependency ratios, age averages and variances, temporal averages and variances, life expectancies, and population growth rates, for both age-classified and stage-classified models. Examples are presented, applying the results to both human and non-human populations.

Adoção do Six Sigma pelas 500 Maiores Empresas em PortugalUse of the Six Sigma by the 500 Largent Companies in PortugalAdopción del Six Sigma por las 500 Mayores Empresas de Portugal

Directory of Open Access Journals (Sweden)

CONCEIÇÃO, Ana Cristina Mendes da

2011-09-01

Full Text Available RESUMOO Six Sigma teve sua gênese em empresas industriais de grande porte que o implementaram como uma ferramenta para redução de falhas na área de produção. Seu sucesso inicial estimulou o emprego desta ferramenta em organizações de outros setores em outras áreas além da de produção. O resultado exitoso destas experiências conferiram ao Six Sigma um status de ferramenta de gestão. O objetivo deste estudo é investigar em que medida o Six Sigma está presente nas 500 maiores empresas não-financeiras portuguesas. A coleta de dados deu-se por intermédio de questionário. Os resultados revelam que o êxito na implementação do Six Sigma está condicionado ao envolvimento dos diversos níveis organizacionais. Além disto, os resultados reportam que a implementação do Six Sigma vem acompanhada de ganhos produtividade e, em geral, de uma maior satisfação dos clientes externos. Constatou-se ainda que há pequena expressão nas empresas analisadas embora o interesse pelo mesmo, como ferramenta de gestão, seja apenas suplantado pela ISO 9001 e o Balanced Scorecard.ABSTRACTThe Six Sigma had its genesis in big industrial companies that have implemented it as a tool for reducing defects. The initial success encouraged its application in other areas and we see today successful implementation in other sectors such as services, and within their own organizations in other areas beyond production, setting; this has contributed to Six Sigma being recognized as a new management model. In order to determine the extent to which Six Sigma is present in Portuguese companies, a questionnaire has been designed to target the 500 largest, non-financial companies, operating in Portugal. From the analysis of the results, we can conclude that top management support and the level of involvement of employees in developing and implementing Six Sigma projects are perceived as critical factors in successful implementations. In terms of impact on the

Production quality improvement analysis of grey cambric using Six Sigma Method

Directory of Open Access Journals (Sweden)

Shafira Yosa Permata

2018-01-01

Full Text Available Quality has an important role in business. A good quality means it is able to meet the required standards. The concept of quality must be comprehensive, whether the quality of the product or its process. PT Textile Yogyakarta is still having a high rate of defect products. The Waste Assessment Model (WAM was used to identify the wastes that frequently occur by scoring each type of waste. The results show the waste rank are defect 26.12%, inventory 20.36%, motion 15.26%, transportation 14.51%, over production 12.91%, waiting 7.17%, and process 3.67%. While using the Six Sigma from the 4 CTQ process, the result of sigma level is 3.3. It means that the sigma level of PT Textile Yogyakarta is still under the average sigma level in Japan which is 5 Sigma. As for the improvement part, FMEA AHP was used and the results show that the first rank is the uncleaned woof residue, the second rank is the uncut thread which has an RPN value of 8.04 that was caused when the operator did not clean the machine from the woof residue, and the third rank is the malfunctioned machine which has an RPN value of 7.32 that was caused by broken kleting.

A Model Predictive Algorithm for Active Control of Nonlinear Noise Processes

Directory of Open Access Journals (Sweden)

Qi-Zhi Zhang

2005-01-01

Full Text Available In this paper, an improved nonlinear Active Noise Control (ANC system is achieved by introducing an appropriate secondary source. For ANC system to be successfully implemented, the nonlinearity of the primary path and time delay of the secondary path must be overcome. A nonlinear Model Predictive Control (MPC strategy is introduced to deal with the time delay in the secondary path and the nonlinearity in the primary path of the ANC system. An overall online modeling technique is utilized for online secondary path and primary path estimation. The secondary path is estimated using an adaptive FIR filter, and the primary path is estimated using a Neural Network (NN. The two models are connected in parallel with the two paths. In this system, the mutual disturbances between the operation of the nonlinear ANC controller and modeling of the secondary can be greatly reduced. The coefficients of the adaptive FIR filter and weight vector of NN are adjusted online. Computer simulations are carried out to compare the proposed nonlinear MPC method with the nonlinear Filter-x Least Mean Square (FXLMS algorithm. The results showed that the convergence speed of the proposed nonlinear MPC algorithm is faster than that of nonlinear FXLMS algorithm. For testing the robust performance of the proposed nonlinear ANC system, the sudden changes in the secondary path and primary path of the ANC system are considered. Results indicated that the proposed nonlinear ANC system can rapidly track the sudden changes in the acoustic paths of the nonlinear ANC system, and ensure the adaptive algorithm stable when the nonlinear ANC system is time variable.

Evidence for the decay sigma+ --> pmu+ mu-.

Science.gov (United States)

Park, H K; Burnstein, R A; Chakravorty, A; Chen, Y C; Choong, W S; Clark, K; Dukes, E C; Durandet, C; Felix, J; Fu, Y; Gidal, G; Gustafson, H R; Holmstrom, T; Huang, M; James, C; Jenkins, C M; Jones, T; Kaplan, D M; Lederman, L M; Leros, N; Longo, M J; Lopez, F; Lu, L C; Luebke, W; Luk, K B; Nelson, K S; Perroud, J-P; Rajaram, D; Rubin, H A; Volk, J; White, C G; White, S L; Zyla, P

2005-01-21

We report the first evidence for the decay Sigma(+)-->pmu(+)mu(-) from data taken by the HyperCP (E871) experiment at Fermilab. Based on three observed events, the branching ratio is B(Sigma(+)-->pmu(+)mu(-))=[8.6(+6.6)(-5.4)(stat)+/-5.5(syst)]x10(-8). The narrow range of dimuon masses may indicate that the decay proceeds via a neutral intermediate state, Sigma(+)-->pP(0),P0-->mu(+)mu(-) with a P0 mass of 214.3+/-0.5 MeV/c(2) and branching ratio B(Sigma(+)-->pP(0),P0-->mu(+)mu(-))=[3.1(+2.4)(-1.9)(stat)+/-1.5(syst)]x10(-8).

Phenomenological modeling of nonlinear holograms based on metallic geometric metasurfaces.

Science.gov (United States)

Ye, Weimin; Li, Xin; Liu, Juan; Zhang, Shuang

2016-10-31

Benefiting from efficient local phase and amplitude control at the subwavelength scale, metasurfaces offer a new platform for computer generated holography with high spatial resolution. Three-dimensional and high efficient holograms have been realized by metasurfaces constituted by subwavelength meta-atoms with spatially varying geometries or orientations. Metasurfaces have been recently extended to the nonlinear optical regime to generate holographic images in harmonic generation waves. Thus far, there has been no vector field simulation of nonlinear metasurface holograms because of the tremendous computational challenge in numerically calculating the collective nonlinear responses of the large number of different subwavelength meta-atoms in a hologram. Here, we propose a general phenomenological method to model nonlinear metasurface holograms based on the assumption that every meta-atom could be described by a localized nonlinear polarizability tensor. Applied to geometric nonlinear metasurfaces, we numerically model the holographic images formed by the second-harmonic waves of different spins. We show that, in contrast to the metasurface holograms operating in the linear optical regime, the wavelength of incident fundamental light should be slightly detuned from the fundamental resonant wavelength to optimize the efficiency and quality of nonlinear holographic images. The proposed modeling provides a general method to simulate nonlinear optical devices based on metallic metasurfaces.

The exact mass-gap of the supersymmetric O(N) sigma model

CERN Document Server

Evans, J M; Evans, Jonathan M; Hollowood, Timothy J

1995-01-01

A formula for the mass-gap of the supersymmetric O(N) sigma model (N>4) in two dimensions is derived: m/\\Lambda_{\\overline{\\rm MS}}=2^{2\\Delta}\\sin(\\pi\\Delta)/(\\pi\\Delta), where \\Delta=1/(N-2) and m is the mass of the fundamental vector particle in the theory. This result is obtained by comparing two expressions for the free-energy density in the presence of a coupling to a conserved charge; one expression is computed from the exact S-matrix of Shankar and Witten via the the thermodynamic Bethe ansatz and the other is computed using conventional perturbation theory. These calculations provide a stringent test of the S-matrix, showing that it correctly reproduces the universal part of the beta-function and resolving the problem of CDD ambiguities.

Nonlinear peculiar-velocity analysis and PCA

Energy Technology Data Exchange (ETDEWEB)

Dekel, A. [and others

2001-02-20

We allow for nonlinear effects in the likelihood analysis of peculiar velocities, and obtain {approximately}35%-lower values for the cosmological density parameter and for the amplitude of mass-density fluctuations. The power spectrum in the linear regime is assumed to be of the flat {Lambda}CDM model (h = 0:65, n = 1) with only {Omega}{sub m} free. Since the likelihood is driven by the nonlinear regime, we break the power spectrum at k{sub b} {approximately} 0.2 (h{sup {minus}1} Mpc){sup {minus}1} and fit a two-parameter power-law at k > k{sub b} . This allows for an unbiased fit in the linear regime. Tests using improved mock catalogs demonstrate a reduced bias and a better fit. We find for the Mark III and SFI data {Omega}{sub m} = 0.35 {+-} 0.09 with {sigma}{sub 8}{Omega}P{sub m}{sup 0.6} = 0.55 {+-} 0.10 (90% errors). When allowing deviations from {Lambda}CDM, we find an indication for a wiggle in the power spectrum in the form of an excess near k {approximately} 0.05 and a deficiency at k {approximately} 0.1 (h{sup {minus}1} Mpc){sup {minus}1}--a cold flow which may be related to a feature indicated from redshift surveys and the second peak in the CMB anisotropy. A {chi}{sup 2} test applied to principal modes demonstrates that the nonlinear procedure improves the goodness of fit. The Principal Component Analysis (PCA) helps identifying spatial features of the data and fine-tuning the theoretical and error models. We address the potential for optimal data compression using PCA.

De praktijk van Lean Six Sigma

NARCIS (Netherlands)

Does, R.J.M.M.; de Koning, H.

2008-01-01

Zowel Lean als Six Sigma zijn benaderingen van kwaliteits- en efficiëntieverbetering die op dit moment sterk in de belangstelling staan van zowel de industrie als de dienstverlening. Lean Six Sigma integreert beide benaderingen. Ze wordt door sommigen gezien als panacee voor alle mogelijke

Lean Six Sigma in a hospital

NARCIS (Netherlands)

van den Heuvel, J.; Does, R.J.M.M.; de Koning, H.

2006-01-01

Abstract Hospitals today face major challenges. Patients demand quality of care to be improved continuously. Health insurance companies demand the lowest possible prices. Lean Six Sigma is a program that can help healthcare providers to achieve these (seemingly) conflicting goals. Lean Six Sigma is

Variational Boussinesq model for strongly nonlinear dispersive waves

NARCIS (Netherlands)

Lawrence, C.; Adytia, D.; van Groesen, E.

2018-01-01

For wave tank, coastal and oceanic applications, a fully nonlinear Variational Boussinesq model with optimized dispersion is derived and a simple Finite Element implementation is described. Improving a previous weakly nonlinear version, high waves over flat and varying bottom are shown to be

SIGMA Experimental Facility; Facilidad Experimental SIGMA

Energy Technology Data Exchange (ETDEWEB)

Rivarola, Martin; Florido, Pablo; Gonzalez, Jose; Brasnarof, Daniel; Orellano, Pablo; Bergallo, Juan [Comision Nacional de Energia Atomica, Centro Atomico Bariloche, Grupo de Disenos Avanzados y Evaluacion Economica, Complejo Tecnologico Pilcaniyeu (Argentina)

2000-07-01

The SIGMA ( Separacion Isotopica Gaseosa por Metodos Avanzados) concept is outlined.The old gaseous diffusion process to enrich uranium has been updated to be economically competitive for small production volumes.Major innovations have been introduced in the membrane design and in the integrated design of compressors and diffusers.The use of injectors and gas turbines has been also adopted.The paper describes the demonstration facility installed by the Argentine Atomic Energy Commission.

Nonlinear Inertia Classification Model and Application

Directory of Open Access Journals (Sweden)

Mei Wang

2014-01-01

Full Text Available Classification model of support vector machine (SVM overcomes the problem of a big number of samples. But the kernel parameter and the punishment factor have great influence on the quality of SVM model. Particle swarm optimization (PSO is an evolutionary search algorithm based on the swarm intelligence, which is suitable for parameter optimization. Accordingly, a nonlinear inertia convergence classification model (NICCM is proposed after the nonlinear inertia convergence (NICPSO is developed in this paper. The velocity of NICPSO is firstly defined as the weighted velocity of the inertia PSO, and the inertia factor is selected to be a nonlinear function. NICPSO is used to optimize the kernel parameter and a punishment factor of SVM. Then, NICCM classifier is trained by using the optical punishment factor and the optical kernel parameter that comes from the optimal particle. Finally, NICCM is applied to the classification of the normal state and fault states of online power cable. It is experimentally proved that the iteration number for the proposed NICPSO to reach the optimal position decreases from 15 to 5 compared with PSO; the training duration is decreased by 0.0052 s and the recognition precision is increased by 4.12% compared with SVM.

Nonlinear observer design for a nonlinear string/cable FEM model using contraction theory

DEFF Research Database (Denmark)

Turkyilmaz, Yilmaz; Jouffroy, Jerome; Egeland, Olav

model is presented in the form of partial differential equations (PDE). Galerkin's method is then applied to obtain a set of ordinary differential equations such that the cable model is approximated by a FEM model. Based on the FEM model, a nonlinear observer is designed to estimate the cable...

Nonlinear Modeling of the PEMFC Based On NNARX Approach

OpenAIRE

Shan-Jen Cheng; Te-Jen Chang; Kuang-Hsiung Tan; Shou-Ling Kuo

2015-01-01

Polymer Electrolyte Membrane Fuel Cell (PEMFC) is such a time-vary nonlinear dynamic system. The traditional linear modeling approach is hard to estimate structure correctly of PEMFC system. From this reason, this paper presents a nonlinear modeling of the PEMFC using Neural Network Auto-regressive model with eXogenous inputs (NNARX) approach. The multilayer perception (MLP) network is applied to evaluate the structure of the NNARX model of PEMFC. The validity and accurac...

A finite element model for nonlinear shells of revolution

International Nuclear Information System (INIS)

Cook, W.A.

1979-01-01

A shell-of-revolution model was developed to analyze impact problems associated with the safety analysis of nuclear material shipping containers. The nonlinear shell theory presented by Eric Reissner in 1972 was used to develop our model. Reissner's approach includes transverse shear deformation and moments turning about the middle surface normal. With these features, this approach is valid for both thin and thick shells. His theory is formulated in terms of strain and stress resultants that refer to the undeformed geometry. This nonlinear shell model is developed using the virtual work principle associated with Reissner's equilibrium equations. First, the virtual work principle is modified for incremental loading; then it is linearized by assuming that the nonlinear portions of the strains are known. By iteration, equilibrium is then approximated for each increment. A benefit of this approach is that this iteration process makes it possible to use nonlinear material properties. (orig.)

On the geometry of two-dimensional anisotropic non-linear Sigma-models

International Nuclear Information System (INIS)

Franco, D.H.; Negrao, M.G.; Helayel Neto, J.A.; Pereira, A.R.

1997-12-01

One discusses here the connection between α-model gauge anomalies and the existence of a connection with torsion that does not flatten the Ricci tensor of the target manifold. The influence of an eventual anisotropy along a certain internal direction is also contemplated. (author)

Heeding the waveform inversion nonlinearity by unwrapping the model and data

KAUST Repository

Alkhalifah, Tariq Ali

2012-01-01

Unlike traveltime inversion, waveform inversion provides relatively higher-resolution inverted models. This feature, however, comes at the cost of introducing complex nonlinearity to the inversion operator complicating the convergence process. We use unwrapped-phase-based objective functions to reduce such nonlinearity in a domain in which the high-frequency component is given by the traveltime inversion. Such information is packaged in a frequency-dependent attribute (or traveltime) that can be easily manipulated at different frequencies. It unwraps the phase of the wavefield yielding far less nonlinearity in the objective function than those experienced with the conventional misfit objective function, and yet it still holds most of the critical waveform information in its frequency dependency. However, it suffers from nonlinearity introduced by the model (or reflectivity), as events interact with each other (something like cross talk). This stems from the sinusoidal nature of the band-limited reflectivity model. Unwrapping the phase for such a model can mitigate this nonlinearity as well. Specifically, a simple modification to the inverted domain (or model), can reduce the effect of the model-induced nonlinearity and, thus, make the inversion more convergent. Simple examples are used to highlight such features.

Estimation of Nonlinear DC-Motor Models Using a Sensitivity Approach

DEFF Research Database (Denmark)

Knudsen, Morten; Jensen, J.G.

1995-01-01

A nonlinear model structure for a permanent magnet DC-motor, appropriate for simulation and controller design, is developed.......A nonlinear model structure for a permanent magnet DC-motor, appropriate for simulation and controller design, is developed....

Parameter Estimation and Prediction of a Nonlinear Storage Model: an algebraic approach

NARCIS (Netherlands)

Doeswijk, T.G.; Keesman, K.J.

2005-01-01

Generally, parameters that are nonlinear in system models are estimated by nonlinear least-squares optimization algorithms. In this paper, if a nonlinear discrete-time model with a polynomial quotient structure in input, output, and parameters, a method is proposed to re-parameterize the model such

Nonlinear Model Predictive Control for Solid Oxide Fuel Cell System Based On Wiener Model

OpenAIRE

T. H. Lee; J. H. Park; S. M. Lee; S. C. Lee

2010-01-01

In this paper, we consider Wiener nonlinear model for solid oxide fuel cell (SOFC). The Wiener model of the SOFC consists of a linear dynamic block and a static output non-linearity followed by the block, in which linear part is approximated by state-space model and the nonlinear part is identified by a polynomial form. To control the SOFC system, we have to consider various view points such as operating conditions, another constraint conditions, change of load current and so on. A change of ...

Formation, stability and crystal structure of the {sigma} phase in Mo-Re-Si alloys

Energy Technology Data Exchange (ETDEWEB)

Bei, H., E-mail: beih@ornl.gov [Oak Ridge National Laboratory, Materials Science and Technology Division, Oak Ridge, TN 37831 (United States); Yang, Y., E-mail: ying.yang@computherm.com [CompuTherm LLC, Madison, WI 53719 (United States); Viswanathan, G.B. [Air Force Research Laboratory, Wright-Patterson AFB, OH 45433 (United States); Rawn, C.J.; George, E.P. [Oak Ridge National Laboratory, Materials Science and Technology Division, Oak Ridge, TN 37831 (United States)] [University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN 37996 (United States); Tiley, J. [Air Force Research Laboratory, Wright-Patterson AFB, OH 45433 (United States); Chang, Y.A. [CompuTherm LLC, Madison, WI 53719 (United States)] [University of Wisconsin-Madison, Madison, WI 53705 (United States)

2010-10-15

The formation, stability and crystal structure of the {sigma} phase in Mo-Re-Si alloys were investigated. Guided by thermodynamic calculations, six critically selected alloys were arc melted and annealed at 1600 deg. C for 150 h. Their as-cast and annealed microstructures, including phase fractions and distributions, the compositions of the constituent phases and the crystal structure of the {sigma} phase were analyzed by thermodynamic modeling coupled with experimental characterization by scanning electron microscopy, electron probe microanalysis, X-ray diffraction and transmission electron microscopy. Two key findings resulted from this work. One is the large homogeneity range of the {sigma} phase region, extending from binary Mo-Re to ternary Mo-Re-Si. The other is the formation of a {sigma} phase in Mo-rich alloys either through the peritectic reaction of liquid + Mo{sub ss} {yields} {sigma} or primary solidification. These findings are important in understanding the effects of Re on the microstructure and providing guidance on the design of Mo-Re-Si alloys.

Six Sigma: blauwdruk voor de kenniseconomie.

NARCIS (Netherlands)

Does, R.J.M.M.; de Mast, J.

2005-01-01

Abstract Six Sigma is zo langzamerhand een niet weg te denken programma voor kwaliteits- en efficiencyverbeteringen. Het heeft met name voor enorme successen gezorgd in productiebedrijven. Six Sigma ligt ook onder vuur: het zou een trend zijn die voorbij gaat. De auteurs van dit artikel zijn het van

Sigma meson in heavy ion collision

International Nuclear Information System (INIS)

Cristian, Ivan; Fuchs, Christian

2004-01-01

We want to present a short theoretical prediction of the behaviour of the sigma meson in heavy ion collisions. It is considered that the sigma meson is a pion-pion correlation, resulting from the decay of the N*(1440) resonance. There will be presented some QMD simulations. (authors)

Supersymmetry and cotangent bundle over non-compact exceptional Hermitian symmetric space

International Nuclear Information System (INIS)

Arai, Masato; Baba, Kurando

2015-01-01

We construct N=2 supersymmetric nonlinear sigma models on the cotangent bundles over the non-compact exceptional Hermitian symmetric spaces M=E 6(−14) /SO(10)×U(1) and E 7(−25) /E 6 ×U(1). In order to construct them we use the projective superspace formalism which is an N=2 off-shell superfield formulation in four-dimensional space-time. This formalism allows us to obtain the explicit expression of N=2 supersymmetric nonlinear sigma models on the cotangent bundles over any Hermitian symmetric spaces in terms of the N=1 superfields, once the Kähler potentials of the base manifolds are obtained. We derive the N=1 supersymmetric nonlinear sigma models on the Kähler manifolds M. Then we extend them into the N=2 supersymmetric models with the use of the result in arXiv:1211.1537 developed in the projective superspace formalism. The resultant models are the N=2 supersymmetric nonlinear sigma models on the cotangent bundles over the Hermitian symmetric spaces M. In this work we complete constructing the cotangent bundles over all the compact and non-compact Hermitian symmetric spaces.

Lukasiewicz-Topos Models of Neural Networks, Cell Genome and Interactome Nonlinear Dynamic Models

CERN Document Server

Baianu, I C

2004-01-01

A categorical and Lukasiewicz-Topos framework for Lukasiewicz Algebraic Logic models of nonlinear dynamics in complex functional systems such as neural networks, genomes and cell interactomes is proposed. Lukasiewicz Algebraic Logic models of genetic networks and signaling pathways in cells are formulated in terms of nonlinear dynamic systems with n-state components that allow for the generalization of previous logical models of both genetic activities and neural networks. An algebraic formulation of variable 'next-state functions' is extended to a Lukasiewicz Topos with an n-valued Lukasiewicz Algebraic Logic subobject classifier description that represents non-random and nonlinear network activities as well as their transformations in developmental processes and carcinogenesis.

Sigma virus and mutation in Drosophila melanogaster

International Nuclear Information System (INIS)

Paquin, S.L.A.

1977-01-01

- The objectives of these experiments have been (1) to verify and evidence more fully the action of sigma in causing recessive lethal mutation on the X chromosome of Drosophila, both in the male and the female germ line; (2) to extend the study of sigma-induced recessive lethal mutation to the Drosophila autosomes; (3) to explore the possibility that this mutagenesis is site-directed; (4) to study the effects of sigma virus in conjunction with radiation in increasing non-disjunction and dominant lethality. The virus increases the rate of radiation-induced nondisjunction by altering meiotic chromosomal behavior. Percentage of non-disjunction with 500 rads of x-rays in the virus-free flies was 0.176, while in sigma-containing lines it was 0.333. With high doses of either x or neutron radiation, the presence of the virus enhances the frequency of dominant lethality. The difference is especially significant with the fast neutrons. The results indicate that sigma, and presumably other viruses, are indeed environmental mutagens and are, therefore, factors in the rate of background or spontaneous mutation

Nonlinear control of the Salnikov model reaction

DEFF Research Database (Denmark)

Recke, Bodil; Jørgensen, Sten Bay

1999-01-01

This paper explores different nonlinear control schemes, applied to a simple model reaction. The model is the Salnikov model, consisting of two ordinary differential equations. The control strategies investigated are I/O-linearisation, Exact linearisation, exact linearisation combined with LQR...

Modeling Autoregressive Processes with Moving-Quantiles-Implied Nonlinearity

Directory of Open Access Journals (Sweden)

Isao Ishida

2015-01-01

Full Text Available We introduce and investigate some properties of a class of nonlinear time series models based on the moving sample quantiles in the autoregressive data generating process. We derive a test fit to detect this type of nonlinearity. Using the daily realized volatility data of Standard & Poor’s 500 (S&P 500 and several other indices, we obtained good performance using these models in an out-of-sample forecasting exercise compared with the forecasts obtained based on the usual linear heterogeneous autoregressive and other models of realized volatility.

The six sigma program: an empirical study of brazilian companies.

OpenAIRE

Carvalho, Marly Monteiro de; Ho, Linda Lee; Pinto, Silvia Helena Boarin

2014-01-01

Purpose – The purpose of this paper is to assess the status of Six Sigma's status in Brazilian companies and understand the integration of this program with other quality management approaches. Additionally, the critical success factors (CSFs) for Six Sigma implementation and primary Six Sigma program characteristics were identified. Finally, the results of the used of Six Sigma were analysed. Design/methodology/approach – An extensive literature review illustrates the primary Six Sigma c...

Modelling Loudspeaker Non-Linearities

DEFF Research Database (Denmark)

Agerkvist, Finn T.

2007-01-01

This paper investigates different techniques for modelling the non-linear parameters of the electrodynamic loudspeaker. The methods are tested not only for their accuracy within the range of original data, but also for the ability to work reasonable outside that range, and it is demonstrated...... that polynomial expansions are rather poor at this, whereas an inverse polynomial expansion or localized fitting functions such as the gaussian are better suited for modelling the Bl-factor and compliance. For the inductance the sigmoid function is shown to give very good results. Finally the time varying...

Nonlinear Modelling of Low Frequency Loudspeakers

DEFF Research Database (Denmark)

Olsen, Erling Sandermann

1997-01-01

In the Danish LoDist project on distortion from dynamic low frequency loudspeakers a detailed nonlinear model of loudspeakers has been developed. The model has been implemented in a PC program so that it can be used to create signals for listening tests and analysis. Also, different methods...

Nonlinear Modelling of Low Frequency Loudspeakers

DEFF Research Database (Denmark)

Olsen, Erling Sandermann

1997-01-01

In the Danish LoDist project on distortion from dynamic low-frequency loudspeakers, a detailed nonlinear model of loudspeakers has been developed. The model has been implemented in a PC program so that it can be used to create signals for listening tests and analysis. Also, different methods...

Thermoviscous Model Equations in Nonlinear Acoustics

DEFF Research Database (Denmark)

Rasmussen, Anders Rønne

Four nonlinear acoustical wave equations that apply to both perfect gasses and arbitrary fluids with a quadratic equation of state are studied. Shock and rarefaction wave solutions to the equations are studied. In order to assess the accuracy of the wave equations, their solutions are compared...... to solutions of the basic equations from which the wave equations are derived. A straightforward weakly nonlinear equation is the most accurate for shock modeling. A higher order wave equation is the most accurate for modeling of smooth disturbances. Investigations of the linear stability properties...... of solutions to the wave equations, reveal that the solutions may become unstable. Such instabilities are not found in the basic equations. Interacting shocks and standing shocks are investigated....

A simple numerical model of a geometrically nonlinear Timoshenko beam

NARCIS (Netherlands)

Keijdener, C.; Metrikine, A.

2015-01-01

In the original problem for which this model was developed, onedimensional flexible objects interact through a non-linear contact model. Due to the non-linear nature of the contact model, a numerical time-domain approach was adopted. One of the goals was to see if the coupling between axial and

Development of an Integrated Nonlinear Aeroservoelastic Flight Dynamic Model of the NASA Generic Transport Model

Science.gov (United States)

Nguyen, Nhan; Ting, Eric

2018-01-01

This paper describes a recent development of an integrated fully coupled aeroservoelastic flight dynamic model of the NASA Generic Transport Model (GTM). The integrated model couples nonlinear flight dynamics to a nonlinear aeroelastic model of the GTM. The nonlinearity includes the coupling of the rigid-body aircraft states in the partial derivatives of the aeroelastic angle of attack. Aeroservoelastic modeling of the control surfaces which are modeled by the Variable Camber Continuous Trailing Edge Flap is also conducted. The R.T. Jones' method is implemented to approximate unsteady aerodynamics. Simulations of the GTM are conducted with simulated continuous and discrete gust loads..

Modeling and non-linear responses of MEMS capacitive accelerometer

Directory of Open Access Journals (Sweden)

Sri Harsha C.

2014-01-01

Full Text Available A theoretical investigation of an electrically actuated beam has been illustrated when the electrostatic-ally actuated micro-cantilever beam is separated from the electrode by a moderately large gap for two distinct types of geometric configurations of MEMS accelerometer. Higher order nonlinear terms have been taken into account for studying the pull in voltage analysis. A nonlinear model of gas film squeezing damping, another source of nonlinearity in MEMS devices is included in obtaining the dynamic responses. Moreover, in the present work, the possible source of nonlinearities while formulating the mathematical model of a MEMS accelerometer and their influences on the dynamic responses have been investigated. The theoretical results obtained by using MATLAB has been verified with the results obtained in FE software and has been found in good agreement. Criterion towards stable micro size accelerometer for each configuration has been investigated. This investigation clearly provides an understanding of nonlinear static and dynamics characteristics of electrostatically micro cantilever based device in MEMS.

Application of Six Sigma Model to Evaluate the Analytical Quality of Four HbA1c Analyzers.

Science.gov (United States)

Maesa, Jos Eacute M; Fern Aacute Ndez-Riejos, Patricia; S Aacute Nchez-Mora, Catalina; Toro-Crespo, Mar Iacute A De; Gonz Aacute Lez-Rodriguez, Concepci Oacute N

2017-01-01

The Six Sigma Model is a global quality management system applicable to the determination of glycated hemoglobin (HbA1c). In addition, this model can ensure the three characteristics influencing the patient risk: the correct performance of the analytical method with low inaccuracy and bias, the quality control strategy used by the laboratory, and the necessary quality of the analyte. The aim of this study is to use the Six Sigma Model for evaluating quality criteria in the determination of glycated hemoglobin HbA1c and its application to assess four different HbA1c analyzers. Four HbA1c analyzers were evaluated: HA-8180V®, D-100®, G8®, and Variant II Turbo®. For 20 consecutive days, two levels of quality control (high and low) provided by the manufacturers were measured in each of the instruments. Imprecision (CV), bias, and Sigma values (σ) were calculated with the data obtained and a method decision chart was developed considering a range of quality requirements (allowable total error, TEa). For a TEa = 3%, HA-8180V = 1.54 σ, D-100 = 1.63 σ, G8 = 2.20 σ, and Variant II Turbo = -0.08 σ. For a TEa = 4%, HA-8180V = 2.34 σ, D-100 = 2.32 σ, G8 = 3.74 σ, and Variant II Turbo = 0.16 σ. For a TEa = 10%, HA8180V = 7.12 σ, D-100 = 6.46 σ, G8 = 13.0 σ, and Variant II Turbo = 1.56 σ. Applying the Stockholm consensus and its subsequent Milan review to the results: the maximum level in quality requirements for HbA1c is an allowable total error (TEa) = 3%, G8 is located in region 2 σ (2.20), which is a poor result, and HA-8180V and D-100 are both in region 1 σ (1.54 and 1.63, respectively), which is an unacceptable analytical performance.

On the infrared divergences of the CP sup(n-1) models

International Nuclear Information System (INIS)

Cobra, B.B.; Gomes, M.

1982-07-01

Some properties of the two-dimensional SU(n) non-linear sigma models, i.e., the CP (sub n-1) models are discussed. They are 1/n expandable and ultraviolet renormalizable. The main result is a proof that the infrared divergences associated with the topological gauge field are cancelled in the case of Green functions of gauge invariant operators. (Author) [pt

IDENTIFICATION AND SELECTION OF SIX SIGMA PROJECTS

Directory of Open Access Journals (Sweden)

Abdalhkeim FA. Flifel

2017-04-01

Full Text Available Six Sigma is a well-structured and proven methodology for improving organizational performance. It helps achieving the goals of the organization through the use of project-driven approach. The implementation of Six sigma approach depends on proper identification and selection of projects, moreover, the selection of right Six sigma projects is one of the critical success factors of six sigma efforts. The paper provides the sources for the identification of potential projects, top down and bottom up approaches, the process of selection of projects, guidelines that assist the selection of appropriate projects, selection criteria which must be precisely chosen in accordance with the objectives, needs and capabilities of the organization as well as sophisticated techniques and tools recommended in the literature for the selection of projects.

Simplified Model of Nonlinear Landau Damping

International Nuclear Information System (INIS)

Yampolsky, N.A.; Fisch, N.J.

2009-01-01

The nonlinear interaction of a plasma wave with resonant electrons results in a plateau in the electron distribution function close to the phase velocity of the plasma wave. As a result, Landau damping of the plasma wave vanishes and the resonant frequency of the plasma wave downshifts. However, this simple picture is invalid when the external driving force changes the plasma wave fast enough so that the plateau cannot be fully developed. A new model to describe amplification of the plasma wave including the saturation of Landau damping and the nonlinear frequency shift is proposed. The proposed model takes into account the change of the plasma wave amplitude and describes saturation of the Landau damping rate in terms of a single fluid equation, which simplifies the description of the inherently kinetic nature of Landau damping. A proposed fluid model, incorporating these simplifications, is verified numerically using a kinetic Vlasov code.

The exact mass-gap of the supersymmetric CP$^{N-1}$ sigma model

CERN Document Server

Evans, J M; Evans, Jonathan M; Hollowood, Timothy J

1995-01-01

A formula for the mass-gap of the supersymmetric \\CP^{n-1} sigma model (n > 1) in two dimensions is derived: m/\\Lambda_{\\overline{\\rm MS}}=\\sin(\\pi\\Delta)/(\\pi\\Delta) where \\Delta=1/n and m is the mass of the fundamental particle multiplet. This result is obtained by comparing two expressions for the free-energy density in the presence of a coupling to a conserved charge; one expression is computed from the exact S-matrix of K\\"oberle and Kurak via the thermodynamic Bethe ansatz and the other is computed using conventional perturbation theory. These calculations provide a stringent test of the S-matrix, showing that it correctly reproduces the universal part of the beta-function and resolving the problem of CDD ambiguities.

Modelization of highly nonlinear waves in coastal regions

Science.gov (United States)

Gouin, Maïté; Ducrozet, Guillaume; Ferrant, Pierre

2015-04-01

The proposed work deals with the development of a highly non-linear model for water wave propagation in coastal regions. The accurate modelization of surface gravity waves is of major interest in ocean engineering, especially in the field of marine renewable energy. These marine structures are intended to be settled in coastal regions where the effect of variable bathymetry may be significant on local wave conditions. This study presents a numerical model for the wave propagation with complex bathymetry. It is based on High-Order Spectral (HOS) method, initially limited to the propagation of non-linear wave fields over flat bottom. Such a model has been developed and validated at the LHEEA Lab. (Ecole Centrale Nantes) over the past few years and the current developments will enlarge its application range. This new numerical model will keep the interesting numerical properties of the original pseudo-spectral approach (convergence, efficiency with the use of FFTs, …) and enable the possibility to propagate highly non-linear wave fields over long time and large distance. Different validations will be provided in addition to the presentation of the method. At first, Bragg reflection will be studied with the proposed approach. If the Bragg condition is satisfied, the reflected wave generated by a sinusoidal bottom patch should be amplified as a result of resonant quadratic interactions between incident wave and bottom. Comparisons will be provided with experiments and reference solutions. Then, the method will be used to consider the transformation of a non-linear monochromatic wave as it propagates up and over a submerged bar. As the waves travel up the front slope of the bar, it steepens and high harmonics are generated due to non-linear interactions. Comparisons with experimental data will be provided. The different test cases will assess the accuracy and efficiency of the method proposed.

Integration of six sigma with lean production: an analysis through multiple cases

Directory of Open Access Journals (Sweden)

Thiago Henrique Pinheiro

2013-08-01

Full Text Available The intense competition between markets has taken companies, regardless of their size, to implement one or more quality improvement programs. One of the main purposes of these programs is the enhancement of company effectiveness and efficiency. There is today a growing interested in a proposal named Lean Six Sigma. Their objective is to apply six sigma concepts integrated with Lean Production. A model named Lean Six Sigma has raised interest, once its objective is to apply the concepts of the Six Sigma program integrating them with the principles of Lean Production. Six Sigma contributes with methods for problem identification, measurement and analysis, and the Lean Production offers techniques and procedures applied to reduce waste in the production. In this context, this paper aims at demonstrating the results of a field research, from which purpose was to identify relevant factors for Six Sigma implementation combined with Lean Production. To meet these objectives, three organizations from different industrial sectors were investigated. It was verified that in two of those companies, the programs were successfully implemented. Based on data analysis, it is possible to identify that one of the major difficulties encountered by the program leaders is related to the company’s human resources infra-structure. It is necessary to take into account that the conclusions are limited to a small sample of three units of analysis. However, this work offers the possibility of an analytical generalization.

Assessing precision, bias and sigma-metrics of 53 measurands of the Alinity ci system.

Science.gov (United States)

Westgard, Sten; Petrides, Victoria; Schneider, Sharon; Berman, Marvin; Herzogenrath, Jörg; Orzechowski, Anthony

2017-12-01

Assay performance is dependent on the accuracy and precision of a given method. These attributes can be combined into an analytical Sigma-metric, providing a simple value for laboratorians to use in evaluating a test method's capability to meet its analytical quality requirements. Sigma-metrics were determined for 37 clinical chemistry assays, 13 immunoassays, and 3 ICT methods on the Alinity ci system. Analytical Performance Specifications were defined for the assays, following a rationale of using CLIA goals first, then Ricos Desirable goals when CLIA did not regulate the method, and then other sources if the Ricos Desirable goal was unrealistic. A precision study was conducted at Abbott on each assay using the Alinity ci system following the CLSI EP05-A2 protocol. Bias was estimated following the CLSI EP09-A3 protocol using samples with concentrations spanning the assay's measuring interval tested in duplicate on the Alinity ci system and ARCHITECT c8000 and i2000 SR systems, where testing was also performed at Abbott. Using the regression model, the %bias was estimated at an important medical decisions point. Then the Sigma-metric was estimated for each assay and was plotted on a method decision chart. The Sigma-metric was calculated using the equation: Sigma-metric=(%TEa-|%bias|)/%CV. The Sigma-metrics and Normalized Method Decision charts demonstrate that a majority of the Alinity assays perform at least at five Sigma or higher, at or near critical medical decision levels. More than 90% of the assays performed at Five and Six Sigma. None performed below Three Sigma. Sigma-metrics plotted on Normalized Method Decision charts provide useful evaluations of performance. The majority of Alinity ci system assays had sigma values >5 and thus laboratories can expect excellent or world class performance. Laboratorians can use these tools as aids in choosing high-quality products, further contributing to the delivery of excellent quality healthcare for patients

Matter couplings in supergravity theories

International Nuclear Information System (INIS)

Bagger, J.A.

1983-01-01

The N = 1 supersymmetric nonlinear sigma model is coupled to supergravity. The results are expressed in the language of Kahler geometry. Topological considerations constrain the scalar fields to lie on a Kahler manifold of restricted type, or a Hodge manifold. For topologically nontrivial manifolds, this leads to the quantization of Newton's constant in terms of the scalar self-coupling. The isometries of the N = 1 model are gauged. This gives a geometrical picture of what might be called the gauge invariant supersymmetric nonlinear sigma model. It also provides a new interpretation of the Fayet-Iliopoulos D-term. The gauge invariant supersymmetric nonlinear sigma model is coupled to N = 1 supergravity. This leads to a deeper understanding of the connections between supergravity, R-invariance and the Fayet-Iliopoulos D-term. It also provides a foundation for phenomenological studies of supergravity theories. Finally, the N = 2 supersymmetric nonlinear sigma model is coupled to supergravity. The scalar fields are found to lie on a negatively curved quaternionic manifold. This implies that matter self-couplings that are allowed in N = 2 supersymmetry are forbidden in N = 2 supergravity, and vice versa

Finite element modeling of nonlinear piezoelectric energy harvesters with magnetic interaction

International Nuclear Information System (INIS)

Upadrashta, Deepesh; Yang, Yaowen

2015-01-01

Piezoelectric energy harvesting from ambient vibrations is a potential technology for powering wireless sensors and low power electronic devices. The conventional linear harvesters suffer from narrow operational bandwidth. Many attempts have been made especially using the magnetic interaction to broaden the bandwidth of harvesters. The finite element (FE) modeling has been used only for analyzing the linear harvesters in the literature. The main difficulties in extending the FE modeling to analyze the nonlinear harvesters involving magnetic interaction are developing the mesh needed for magnetic interaction in dynamic problems and the high demand on computational resource needed for solving the coupled electrical–mechanical–magnetic problem. In this paper, an innovative method is proposed to model the magnetic interaction without inclusion of the magnetic module. The magnetic force is modeled using the nonlinear spring element available in ANSYS finite element analysis (FEA) package, thus simplifying the simulation of nonlinear piezoelectric energy harvesters as an electromechanically coupled problem. Firstly, an FE model of a monostable nonlinear harvester with cantilever configuration is developed and the results are validated with predictions from the theoretical model. Later, the proposed technique of FE modeling is extended to a complex 2-degree of freedom nonlinear energy harvester for which an accurate analytical model is difficult to derive. The performance predictions from FEA are compared with the experimental results. It is concluded that the proposed modeling technique is able to accurately analyze the behavior of nonlinear harvesters with magnetic interaction. (paper)

Six sigma critical success factors in manufacturing industries

Science.gov (United States)

Mustafa, Zainol; Jamaluddin, Z.

2017-04-01

The success of Six Sigma implementation is known to depend on a number of contributing factors. The purpose of this paper is to explore Six Sigma critical success factors (CSFs) in the context of Malaysian manufacturing organizations. Although Six Sigma success factors have been abundantly researched in the global context, in this paper, a maiden attempt is made to identify, through an extensive literature review, the CSFs for Six Sigma implementation followed by their validation using primary data collection from Malaysian manufacturing companies. A total of 33 indicators have thus been compiled through an extensive literature review which then been grouped into 6 contributing factors. These contributing success factors are then validated through an empirical research of selected Malaysian manufacturing companies at various stages of implementation of the Six Sigma process improvement methodology. There has been an overemphasis on the role and commitment of the management in the success of a Six Sigma program. Though it is undoubted, certain other factors also play an equally important role in ensuring that the Six Sigma programs are successful. The factor analysis of CSFs of the Malaysian manufacturing organizations selected in this study demonstrates that the top factor is a composite factor showing combination of the ability of the project teams to use the process management on quality initiative and a training using a proper analysis in problem solving. The CSFs extracted through the factor analysis could provide a basis for manufacturing organizations embarking on the Six Sigma journey to look beyond just management involvement. Thus, one can develop an integrated framework of other factors as outlined and give them appropriate priority and focus.

Nonlinear Prediction Model for Hydrologic Time Series Based on Wavelet Decomposition

Science.gov (United States)

Kwon, H.; Khalil, A.; Brown, C.; Lall, U.; Ahn, H.; Moon, Y.

2005-12-01

Traditionally forecasting and characterizations of hydrologic systems is performed utilizing many techniques. Stochastic linear methods such as AR and ARIMA and nonlinear ones such as statistical learning theory based tools have been extensively used. The common difficulty to all methods is the determination of sufficient and necessary information and predictors for a successful prediction. Relationships between hydrologic variables are often highly nonlinear and interrelated across the temporal scale. A new hybrid approach is proposed for the simulation of hydrologic time series combining both the wavelet transform and the nonlinear model. The present model employs some merits of wavelet transform and nonlinear time series model. The Wavelet Transform is adopted to decompose a hydrologic nonlinear process into a set of mono-component signals, which are simulated by nonlinear model. The hybrid methodology is formulated in a manner to improve the accuracy of a long term forecasting. The proposed hybrid model yields much better results in terms of capturing and reproducing the time-frequency properties of the system at hand. Prediction results are promising when compared to traditional univariate time series models. An application of the plausibility of the proposed methodology is provided and the results conclude that wavelet based time series model can be utilized for simulating and forecasting of hydrologic variable reasonably well. This will ultimately serve the purpose of integrated water resources planning and management.

A Semiempirical Model for Sigma-Phase Precipitation in Duplex and Superduplex Stainless Steels

Science.gov (United States)

Ferro, P.; Bonollo, F.

2012-04-01

Sigma phase is known to reduce the mechanical properties and corrosion resistance of duplex and superduplex stainless steels. Therefore, heat treatments and welding must be carefully performed so as to avoid the appearance of such a detrimental phase, and clearly, models suitable to faithfully predict σ-phase precipitation are very useful tools. Most fully analytical models are based on thermodynamic calculations whose agreement with experimental results is not always good, so that such models should be used for qualitative purposes only. Alternatively, it is possible to exploit semiempirical models, where time-temperature-transformation (TTT) diagrams are empirically determined for a given alloy and the continuous-cooling-transformation (CCT) diagram is calculated from the TTT diagram. In this work, a semiempirical model for σ-phase precipitation in duplex and superduplex stainless steels, under both isothermal and unisothermal conditions, is proposed. Model parameters are calculated from empirical data and CCT diagrams are obtained by means of the additivity rule, whereas experimental measurements for model validation are taken from the literature. This model gives a satisfactory estimation of σ-phase precipitates during both isothermal aging and the continuous cooling process.

Development of nonperturbative nonlinear optics models including effects of high order nonlinearities and of free electron plasma: Maxwell–Schrödinger equations coupled with evolution equations for polarization effects, and the SFA-like nonlinear optics model

International Nuclear Information System (INIS)

Lorin, E; Bandrauk, A D; Lytova, M; Memarian, A

2015-01-01

This paper is dedicated to the exploration of non-conventional nonlinear optics models for intense and short electromagnetic fields propagating in a gas. When an intense field interacts with a gas, usual nonlinear optics models, such as cubic nonlinear Maxwell, wave and Schrödinger equations, derived by perturbation theory may become inaccurate or even irrelevant. As a consequence, and to include in particular the effect of free electrons generated by laser–molecule interaction, several heuristic models, such as UPPE, HOKE models, etc, coupled with Drude-like models [1, 2], were derived. The goal of this paper is to present alternative approaches based on non-heuristic principles. This work is in particular motivated by the on-going debate in the filamentation community, about the effect of high order nonlinearities versus plasma effects due to free electrons, in pulse defocusing occurring in laser filaments [3–9]. The motivation of our work goes beyond filamentation modeling, and is more generally related to the interaction of any external intense and (short) pulse with a gas. In this paper, two different strategies are developed. The first one is based on the derivation of an evolution equation on the polarization, in order to determine the response of the medium (polarization) subject to a short and intense electromagnetic field. Then, we derive a combined semi-heuristic model, based on Lewenstein’s strong field approximation model and the usual perturbative modeling in nonlinear optics. The proposed model allows for inclusion of high order nonlinearities as well as free electron plasma effects. (paper)

Effect of P T symmetry on nonlinear waves for three-wave interaction models in the quadratic nonlinear media

Science.gov (United States)

Shen, Yujia; Wen, Zichao; Yan, Zhenya; Hang, Chao

2018-04-01

We study the three-wave interaction that couples an electromagnetic pump wave to two frequency down-converted daughter waves in a quadratic optical crystal and P T -symmetric potentials. P T symmetric potentials are shown to modulate stably nonlinear modes in two kinds of three-wave interaction models. The first one is a spatially extended three-wave interaction system with odd gain-and-loss distribution in the channel. Modulated by the P T -symmetric single-well or multi-well Scarf-II potentials, the system is numerically shown to possess stable soliton solutions. Via adiabatical change of system parameters, numerical simulations for the excitation and evolution of nonlinear modes are also performed. The second one is a combination of P T -symmetric models which are coupled via three-wave interactions. Families of nonlinear modes are found with some particular choices of parameters. Stable and unstable nonlinear modes are shown in distinct families by means of numerical simulations. These results will be useful to further investigate nonlinear modes in three-wave interaction models.

Nonlinear Model Predictive Control with Constraint Satisfactions for a Quadcopter

Science.gov (United States)

Wang, Ye; Ramirez-Jaime, Andres; Xu, Feng; Puig, Vicenç

2017-01-01

This paper presents a nonlinear model predictive control (NMPC) strategy combined with constraint satisfactions for a quadcopter. The full dynamics of the quadcopter describing the attitude and position are nonlinear, which are quite sensitive to changes of inputs and disturbances. By means of constraint satisfactions, partial nonlinearities and modeling errors of the control-oriented model of full dynamics can be transformed into the inequality constraints. Subsequently, the quadcopter can be controlled by an NMPC controller with the updated constraints generated by constraint satisfactions. Finally, the simulation results applied to a quadcopter simulator are provided to show the effectiveness of the proposed strategy.

Precipitation Mechanism of Sigma Phase in Super Duplex Stainless Steels

Science.gov (United States)

Nakade, Katsuyuki; Kuroda, Toshio

The influence of alloying elements on the precipitation behavior of sigma (σ) phase was investigated for conventional SAF2205 and SAF2507 super duplex stainless steel. Time-Temperature-Precipitation (T-T-P) diagram of sigma phase of SAF2507 were shifted toward to shorter times compared to SAF2205. The precipitation of sigma phase was accelerated with increasing Cr and Mo concentration. According to the microstructure observation, the sigma phase began to precipitate at ferrite (α) ⁄ austenite (γ) phase boundaries and grew into ferrite for SAF2507 and SAF2205 steel. In the as-received condition, Cr and Mo concentration in ferrite was clearly higher than that in austenite. Especially, it was found that Mo concentration in ferrite of SAF2507 was higher than that in ferrite of SAF2205. The result of EPMA-measurement showed that sigma phase was mainly Fe-Cr-Mo intermetallic compound and Mo was significantly enriched into sigma phase. The difference of Mo concentration in ferrite significantly affected to the sigma phase precipitation. The secondary austenite formation was also induced by sigma phase precipitation. Cr and Mo were ejected to the remained ferrite ⁄ austenite phase boundaries by secondary austenite formation. Consequently, sigma phase precipitation was more accelerated by the reheating.

Nonlinear Fuzzy Model Predictive Control for a PWR Nuclear Power Plant

Directory of Open Access Journals (Sweden)

Xiangjie Liu

2014-01-01

Full Text Available Reliable power and temperature control in pressurized water reactor (PWR nuclear power plant is necessary to guarantee high efficiency and plant safety. Since the nuclear plants are quite nonlinear, the paper presents nonlinear fuzzy model predictive control (MPC, by incorporating the realistic constraints, to realize the plant optimization. T-S fuzzy modeling on nuclear power plant is utilized to approximate the nonlinear plant, based on which the nonlinear MPC controller is devised via parallel distributed compensation (PDC scheme in order to solve the nonlinear constraint optimization problem. Improved performance compared to the traditional PID controller for a TMI-type PWR is obtained in the simulation.

SIGMA WEB INTERFACE FOR REACTOR DATA APPLICATIONS

Energy Technology Data Exchange (ETDEWEB)

Pritychenko,B.; Sonzogni, A.A.

2010-05-09

We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

Sigma Web Interface For Reactor Data Applications

International Nuclear Information System (INIS)

Pritychenko, B.; Sonzogni, A.A.

2010-01-01

We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

Six sigma and lean production adoption in a manufacturing company

Directory of Open Access Journals (Sweden)

Alisson Christian Scheller

2014-11-01

Full Text Available The connection among Lean Production with Six Sigma originated the Lean Six Sigma methodology, focused on processes variation and waste reduction. This methodology was developed on different ways in the companies and there is no consensus over its structure and its implementation. In this context, this paper aims to identify and analyze the main characteristics on the adoption and integration of Lean Six Sigma methodology through a case study conducted in a manufacturing company that adopts lean production and six sigma. The results show two important aspects of the Lean Six Sigma methodology. One of them is the adoption of the value stream mapping as a central tool on Lean Six Sigma. The other is the use of DMAIC for improvements actions. The study indicates that despite the difficulties on Lean Six Sigma implementation, the methodology offers benefits to the company that adopts it in the suitable way.

COMBINING LONG MEMORY AND NONLINEAR MODEL OUTPUTS FOR INFLATION FORECAST

OpenAIRE

Heri Kuswanto; Irhamah Alimuhajin; Laylia Afidah

2014-01-01

Long memory and nonlinearity have been proven as two models that are easily to be mistaken. In other words, nonlinearity is a strong candidate of spurious long memory by introducing a certain degree of fractional integration that lies in the region of long memory. Indeed, nonlinear process belongs to short memory with zero integration order. The idea of the forecast is to obtain the future condition with minimum error. Some researches argued that no matter what the model is, the important thi...

Nonlinear friction model for servo press simulation

Science.gov (United States)

Ma, Ninshu; Sugitomo, Nobuhiko; Kyuno, Takunori; Tamura, Shintaro; Naka, Tetsuo

2013-12-01

The friction coefficient was measured under an idealized condition for a pulse servo motion. The measured friction coefficient and its changing with both sliding distance and a pulse motion showed that the friction resistance can be reduced due to the re-lubrication during unloading process of the pulse servo motion. Based on the measured friction coefficient and its changes with sliding distance and re-lubrication of oil, a nonlinear friction model was developed. Using the newly developed the nonlinear friction model, a deep draw simulation was performed and the formability was evaluated. The results were compared with experimental ones and the effectiveness was verified.

Integrating the Many Facets of Six Sigma

NARCIS (Netherlands)

de Mast, J.

2007-01-01

We seek to provide a unified characterization of Six Sigma by studying the phenomenon from the perspectives of business economics, organizational theory, competitive strategy and industrial statistics, and we pinpoint its core methodological principles. We describe Six Sigma as a prescriptive

Mathematical models for suspension bridges nonlinear structural instability

CERN Document Server

Gazzola, Filippo

2015-01-01

This work provides a detailed and up-to-the-minute survey of the various stability problems that can affect suspension bridges. In order to deduce some experimental data and rules on the behavior of suspension bridges, a number of historical events are first described, in the course of which several questions concerning their stability naturally arise. The book then surveys conventional mathematical models for suspension bridges and suggests new nonlinear alternatives, which can potentially supply answers to some stability questions. New explanations are also provided, based on the nonlinear structural behavior of bridges. All the models and responses presented in the book employ the theory of differential equations and dynamical systems in the broader sense, demonstrating that methods from nonlinear analysis can allow us to determine the thresholds of instability.

Ab initio calculation of the electronic structures of the (7)Sigma+ ground and A (7)Pi and a (5)Sigma+ excited states of MnH.

Science.gov (United States)

Tomonari, Mutsumi; Nagashima, Umpei; Hirano, Tsuneo

2009-04-21

Electronic structures and molecular constants of the ground (7)Sigma(+) and low-lying A (7)Pi and a (5)Sigma(+) electronic excited states of the MnH molecule were studied by multireference single and double excitation configuration interaction (MR-SDCI) with Davidson's correction (+Q) calculations under exact C(infinity v) symmetry using Slater-type basis sets. To correctly describe the (7)Sigma(+) electronic ground state, X (7)Sigma(+), at the MR-SDCI+Q calculation, we employed a large number of reference configurations in terms of the state-averaged complete active space self-consistent field (CASSCF) orbitals, taking into account the contribution from the B (7)Sigma(+) excited state. The A (7)Pi and a (5)Sigma(+) states can well be described by the MR-SDCI wave functions based on the CASSCF orbitals obtained for the lowest state only. In the MR-SDCI+Q, calculations of the X (7)Sigma(+), A (7)Pi, and a (5)Sigma(+) states required 16, 7, and 17 reference configurations, respectively. Molecular constants, i.e., r(e) and omega(e) of these states and excitation energy from the X (7)Sigma(+) state, obtained at the MR-SDCI+Q level, showed a good agreement with experimental values. The small remaining differences may be accounted for by taking relativistic effects into account.

SIX SIGMA: A LITERATURE REVIEW

Directory of Open Access Journals (Sweden)

S.A. Oke

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Despite stiff international competition in the global market, world-class manufacturers are increasing their market share and profits through low-cost production, waste reduction in manufacturing, production of high quality products, and exceptional customer service. Six Sigma has been successfully implemented in this regard. In this paper, a selected survey of Six Sigma literature is presented to illustrate the wide scope of the application of the concept. This could be of immense benefit to organizations’ top management who need to understand the critical variables and factors for the successful implementation of Six Sigma programmes, leading to substantial, sustainable long-term improvement in performance results, value for money, and effort. The paper presents motivated pointers – substantiated as far as possible by data and evidence – to key success factors, variables, and their interrelationships.

AFRIKAANSE OPSOMMING: Sterk internasionale mededinging ten spyt verhoog wêreldklasvervaardigers hul markaandeel en winste via laekosteproduksie, skrootvermindering, die produksie van gehalteprodukte en die lewering van primadiens aan klante. Ses Sigma is in hierdie verband as gereedskap suksesvol geïmplimenteer. Die artikel behandel 'n gekeurde oorsig van Ses Sigmaliteratuur om sodoende die toepassingsveldwyde van die konsep te illustreer. Die artikel is nuttig vir organisasiebestuurders uit die oogpunt van veranderlikes en suksesfaktore wat deur die Ses Sigmametode tot substansiële en volhoubare langtermyn verbeterings van 'n onderneming kan lei.

Six Sigma in healthcare delivery.

Science.gov (United States)

Liberatore, Matthew J

2013-01-01

The purpose of this paper is to conduct a comprehensive review and assessment of the extant Six Sigma healthcare literature, focusing on: application, process changes initiated and outcomes, including improvements in process metrics, cost and revenue. Data were obtained from an extensive literature search. Healthcare Six Sigma applications were categorized by functional area and department, key process metric, cost savings and revenue generation (if any) and other key implementation characteristics. Several inpatient care areas have seen most applications, including admission, discharge, medication administration, operating room (OR), cardiac and intensive care. About 42.1 percent of the applications have error rate as their driving metric, with the remainder focusing on process time (38 percent) and productivity (18.9 percent). While 67 percent had initial improvement in the key process metric, only 10 percent reported sustained improvement. Only 28 percent reported cost savings and 8 percent offered revenue enhancement. These results do not favorably assess Six Sigma's overall effectiveness and the value it offers healthcare. Results are based on reported applications. Future research can include directly surveying healthcare organizations to provide additional data for assessment. Future application should emphasize obtaining improvements that lead to significant and sustainable value. Healthcare staff can use the results to target promising areas. This article comprehensively assesses Six Sigma healthcare applications and impact.

Improving laboratory data entry quality using Six Sigma.

Science.gov (United States)

Elbireer, Ali; Le Chasseur, Julie; Jackson, Brooks

2013-01-01

The Uganda Makerere University provides clinical laboratory support to over 70 clients in Uganda. With increased volume, manual data entry errors have steadily increased, prompting laboratory managers to employ the Six Sigma method to evaluate and reduce their problems. The purpose of this paper is to describe how laboratory data entry quality was improved by using Six Sigma. The Six Sigma Quality Improvement (QI) project team followed a sequence of steps, starting with defining project goals, measuring data entry errors to assess current performance, analyzing data and determining data-entry error root causes. Finally the team implemented changes and control measures to address the root causes and to maintain improvements. Establishing the Six Sigma project required considerable resources and maintaining the gains requires additional personnel time and dedicated resources. After initiating the Six Sigma project, there was a 60.5 percent reduction in data entry errors from 423 errors a month (i.e. 4.34 Six Sigma) in the first month, down to an average 166 errors/month (i.e. 4.65 Six Sigma) over 12 months. The team estimated the average cost of identifying and fixing a data entry error to be $16.25 per error. Thus, reducing errors by an average of 257 errors per month over one year has saved the laboratory an estimated $50,115 a year. The Six Sigma QI project provides a replicable framework for Ugandan laboratory staff and other resource-limited organizations to promote quality environment. Laboratory staff can deliver excellent care at a lower cost, by applying QI principles. This innovative QI method of reducing data entry errors in medical laboratories may improve the clinical workflow processes and make cost savings across the health care continuum.

Investigating readiness in the Iranian steel industry through six sigma combined with fuzzy delphi and fuzzy DANP

Directory of Open Access Journals (Sweden)

Peyman Barzegar Keliji

2018-09-01

Full Text Available In today's competitive world, Six Sigma can serve as a corporate strategy to improve quality and reduce costs. Six Sigma is a comprehensive and flexible system for achieving, maintaining and maximizing organizational success, through an improved performance of processes. However, this tool can only be successful in organizations which are already prepared for Six Sigma implementation. This study investigated the readiness of an Iranian company, Tabarestan Steel Co., in terms of Six Sigma projects. In doing so, the study proposed a model designed for assessing the readiness of Six Sigma in organizations. To this end, primarily Six Sigma readiness indicators were identified through Fuzzy Delphi, by recourse to the experts’ opinions. Next the interrelationships between the indicators were examined through the Fuzzy DEMATEL method. The internal links between the indicators were determined after the examination, and the degree of importance and the weights of the indicators were decided. Ultimately, three highly important dimensions were discovered that had a significant function in Six Sigma implementation (leadership and perspective, corporate strategy, and focus on the customer.

Incorporating Six Sigma Methodology Training into Chemical Engineering Education

Science.gov (United States)

Dai, Lenore L.

2007-01-01

Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

An Improved Nonlinear Five-Point Model for Photovoltaic Modules

Directory of Open Access Journals (Sweden)

Sakaros Bogning Dongue

2013-01-01

Full Text Available This paper presents an improved nonlinear five-point model capable of analytically describing the electrical behaviors of a photovoltaic module for each generic operating condition of temperature and solar irradiance. The models used to replicate the electrical behaviors of operating PV modules are usually based on some simplified assumptions which provide convenient mathematical model which can be used in conventional simulation tools. Unfortunately, these assumptions cause some inaccuracies, and hence unrealistic economic returns are predicted. As an alternative, we used the advantages of a nonlinear analytical five-point model to take into account the nonideal diode effects and nonlinear effects generally ignored, which PV modules operation depends on. To verify the capability of our method to fit PV panel characteristics, the procedure was tested on three different panels. Results were compared with the data issued by manufacturers and with the results obtained using the five-parameter model proposed by other authors.

Modelling of a bridge-shaped nonlinear piezoelectric energy harvester

International Nuclear Information System (INIS)

Gafforelli, G; Corigliano, A; Xu, R; Kim, S G

2013-01-01

Piezoelectric MicroElectroMechanical Systems (MEMS) energy harvesting is an attractive technology for harvesting small magnitudes of energy from ambient vibrations. Increasing the operating frequency bandwidth of such devices is one of the major issues for real world applications. A MEMS-scale doubly clamped nonlinear beam resonator is designed and developed to demonstrate very wide bandwidth and high power density. In this paper a first complete theoretical discussion of nonlinear resonating piezoelectric energy harvesting is provided. The sectional behaviour of the beam is studied through the Classical Lamination Theory (CLT) specifically modified to introduce the piezoelectric coupling and nonlinear Green-Lagrange strain tensor. A lumped parameter model is built through Rayleigh-Ritz Method and the resulting nonlinear coupled equations are solved in the frequency domain through the Harmonic Balance Method (HBM). Finally, the influence of external load resistance on the dynamic behaviour is studied. The theoretical model shows that nonlinear resonant harvesters have much wider power bandwidth than that of linear resonators but their maximum power is still bounded by the mechanical damping as is the case for linear resonating harvesters

Study of the quasi-two body processes including {sigma}(1385) production in {pi}{sup -}p and K{sup -} reactions at 4 GeV/c; Estudio de procesos cuasi-dos cuerpos con produccion de {sigma} (1385) en interacciones {pi}{sup -}p y K{sup p} A 4 GeV/c

Energy Technology Data Exchange (ETDEWEB)

Aguilar-Benitez, M; Salicio, J

1981-07-01

An analysis of (1385) production in reactions of the type 0{sup +} 1/z 4 +{yields}>-1{sup +} 3+/2 and 0{sup -} + 1/2+{yields} 0{sup -} + 3*/2 is presented. A determination of the {sigma}(1385) production parameters Is performed and the results are compared with the predictions from several models. A transversity amplitudes reconstruction describing the processes {pi} {sup p} ->K(890) {sigma}(1385) and K{sup -}p {yields} 3{yields}{phi}(1385), {zeta}{sup -}{sigma}(1385) is obtained in a model independent way. We observe dominance of unnatural partly exchange in the production mechanisms. Exchanges of exotic quantum numbers are established by the study of {pi}p {yields} K{sup 0}+ {sigma}(1385)s and K{sup -} p{yields}>{pi}+{sigma}(1385){+-} processes. Additive quark model predictions are reasonable agreement with the experimental data. (Author)

Lean six sigma application to transportation logistics

Directory of Open Access Journals (Sweden)

Simone Tavares Fernandes

2012-06-01

Full Text Available This work presents the application of Lean Six Sigma in a case study of a metallurgic industry. The Six Sigma and the Lean are two processes used by enterprises in Brazil and worldwide. Currently the integration of these processes is a challenge for these companies, which search a way more efficient to reduce their wastes and to adapt to the needs of their markets. The paper had as purpose to demonstrate the applicability of the Lean Six Sigma in a real logistical problem related to the transportation of goods among units of a metallurgic industry. The stages used for the solution of the problem follow the DMAIC cycle – Define, Measure, Analyze, Improve and Control. The paper presents in details the integrated approach of the improvement processes Lean and Six Sigma, their tools set, as well the excellent results obtained in the case study.

Fast and local non-linear evolution of steep wave-groups on deep water: A comparison of approximate models to fully non-linear simulations

International Nuclear Information System (INIS)

Adcock, T. A. A.; Taylor, P. H.

2016-01-01

The non-linear Schrödinger equation and its higher order extensions are routinely used for analysis of extreme ocean waves. This paper compares the evolution of individual wave-packets modelled using non-linear Schrödinger type equations with packets modelled using fully non-linear potential flow models. The modified non-linear Schrödinger Equation accurately models the relatively large scale non-linear changes to the shape of wave-groups, with a dramatic contraction of the group along the mean propagation direction and a corresponding extension of the width of the wave-crests. In addition, as extreme wave form, there is a local non-linear contraction of the wave-group around the crest which leads to a localised broadening of the wave spectrum which the bandwidth limited non-linear Schrödinger Equations struggle to capture. This limitation occurs for waves of moderate steepness and a narrow underlying spectrum

Inhibition of tumor cell growth by Sigma1 ligand mediated translational repression

International Nuclear Information System (INIS)

Kim, Felix J.; Schrock, Joel M.; Spino, Christina M.; Marino, Jacqueline C.; Pasternak, Gavril W.

2012-01-01

Highlights: ► Sigma1 ligand treatment mediates decrease in tumor cell mass. ► Identification of a Sigma1 ligand with reversible translational repressor actions. ► Demonstration of a role for Sigma1 in cellular protein synthesis. -- Abstract: Treatment with sigma1 receptor (Sigma1) ligands can inhibit cell proliferation in vitro and tumor growth in vivo. However, the cellular pathways engaged in response to Sigma1 ligand treatment that contribute to these outcomes remain largely undefined. Here, we show that treatment with putative antagonists of Sigma1 decreases cell mass. This effect corresponds with repressed cap-dependent translation initiation in multiple breast and prostate cancer cell lines. Sigma1 antagonist treatment suppresses phosphorylation of translational regulator proteins p70S6K, S6, and 4E-BP1. RNAi-mediated knockdown of Sigma1 also results in translational repression, consistent with the effects of antagonist treatment. Sigma1 antagonist mediated translational repression and decreased cell size are both reversible. Together, these data reveal a role for Sigma1 in tumor cell protein synthesis, and demonstrate that small molecule Sigma1 ligands can be used as modulators of protein translation.

Sigma-1 receptor: The novel intracellular target of neuropsychotherapeutic drugs

Directory of Open Access Journals (Sweden)

Teruo Hayashi

2015-01-01

Full Text Available Sigma-1 receptor ligands have been long expected to serve as drugs for treatment of human diseases such as neurodegenerative disorders, depression, idiopathic pain, drug abuse, and cancer. Recent research exploring the molecular function of the sigma-1 receptor started unveiling underlying mechanisms of the therapeutic activity of those ligands. Via the molecular chaperone activity, the sigma-1 receptor regulates protein folding/degradation, ER/oxidative stress, and cell survival. The chaperone activity is activated or inhibited by synthetic sigma-1 receptor ligands in an agonist-antagonist manner. Sigma-1 receptors are localized at the endoplasmic reticulum (ER membranes that are physically associated with the mitochondria (MAM: mitochondria-associated ER membrane. In specific types of neurons (e.g., those at the spinal cord, sigma-1 receptors are also clustered at ER membranes that juxtapose postsynaptic plasma membranes. Recent studies indicate that sigma-1 receptors, partly in sake of its unique subcellular localization, regulate the mitochondria function that involves bioenergetics and free radical generation. The sigma-1 receptor may thus provide an intracellular drug target that enables controlling ER stress and free radical generation under pathological conditions.

Studi Implementasi Six Sigma dalam Sistem Inventori Galangan Kapal

Directory of Open Access Journals (Sweden)

Elwin Elwin

2012-09-01

Full Text Available Dalam industri galangan kapal terdapat bahan baku, barang dalam proses dan barang jadi yang merupakan macam-macam bentuk dari persediaan dan berhubungan dengan stok, ketika persediaan tidak dikelola dengan benar maka akan terjadi pembengkakkan biaya/pengeluaran biaya yang tidak dibutuhkan. Tugas akhir ini bertujuan untuk mengetahui kondisi inventori di PT. Dok dan Perkapalan Surbaya, untuk mengetahui faktor-faktor yang menjadi penyebab terjadinya variabilitas output six sigma dan mengurangi defect pada sistem inventori dengan menggunakan metode six sigma DMAIC (Define, Measure, Analyze, Improve dan Control,. Berdasarkan perhitungan Material Pipa mengalami defect sebesar 50.98% dengan nilai sigma 1.48, Material Elbow mengalami defect sebesar 89.80% dengan nilai sigma 0.33, Material Flange mengalami defect sebesar 71.99% dengan nilai sigma 0.90, Material Paking mengalami defect sebesar 13.12% dengan nilai sigma 2.74 dan Material Mur mengalami defect sebesar 17.26% dengan nilai sigma 2.57. Sesuai dengan perhitungan reorder point for the inventory untuk masing-masing material, maka dapat diketahui bahwa material Pipa reoder point adalah 58 lonjor, elbow 100 buah, flange 168 buah, paking 24 buah dan mur 946 buah. Nilai sigma yang diperoleh dalam perhitungan tingkat persediaan masih jauh dari nilai yang seharusnya dapat dicapai oleh suatu perusahaan (6σ, sehingga dilakukan tahap Improve dengan metode Failure Mode and Effect Analysis (FMEA, pembuat SOP Pengendalian persediaan material dengan format baru serta galangan perlu melakukan perhitungan reorder point.  

Understanding delta-sigma data converters

CERN Document Server

Pavan, Shanti; Temes, Gabor C

2017-01-01

This new edition introduces novel analysis and design techniques for delta-sigma (ΔΣ) converters in physical and conceptual terms, and includes new chapters that explore developments in the field over the last decade. This book explains the principles and operation of delta-sigma analog-to-digital converters (ADCs) in physical and conceptual terms in accordance with the most recent developments in the field. The interest of ΔΣ converter designers has shifted significantly over the past decade, due to many new applications for data converters at the far ends of the frequency spectrum. Continuous-time delta-sigma A/D converters with GHz clocks, of both lowpass and bandpass types, are required for wireless applications. At the other extreme, multiplexed ADCs with very narrow (sometimes 10 Hz wide) signal bandwidths, but very high accuracy are needed in the interfaces of biomedical and environmental sensors. To reflect the changing eeds of designers, the second edition includes significant new material on bo...

Spatiotemporal drought forecasting using nonlinear models

Science.gov (United States)

Vasiliades, Lampros; Loukas, Athanasios

2010-05-01

Spatiotemporal data mining is the extraction of unknown and implicit knowledge, structures, spatiotemporal relationships, or patterns not explicitly stored in spatiotemporal databases. As one of data mining techniques, forecasting is widely used to predict the unknown future based upon the patterns hidden in the current and past data. In order to achieve spatiotemporal forecasting, some mature analysis tools, e.g., time series and spatial statistics are extended to the spatial dimension and the temporal dimension, respectively. Drought forecasting plays an important role in the planning and management of natural resources and water resource systems in a river basin. Early and timelines forecasting of a drought event can help to take proactive measures and set out drought mitigation strategies to alleviate the impacts of drought. Despite the widespread application of nonlinear mathematical models, comparative studies on spatiotemporal drought forecasting using different models are still a huge task for modellers. This study uses a promising approach, the Gamma Test (GT), to select the input variables and the training data length, so that the trial and error workload could be greatly reduced. The GT enables to quickly evaluate and estimate the best mean squared error that can be achieved by a smooth model on any unseen data for a given selection of inputs, prior to model construction. The GT is applied to forecast droughts using monthly Standardized Precipitation Index (SPI) timeseries at multiple timescales in several precipitation stations at Pinios river basin in Thessaly region, Greece. Several nonlinear models have been developed efficiently, with the aid of the GT, for 1-month up to 12-month ahead forecasting. Several temporal and spatial statistical indices were considered for the performance evaluation of the models. The predicted results show reasonably good agreement with the actual data for short lead times, whereas the forecasting accuracy decreases with

Nonlinear adaptive inverse control via the unified model neural network

Science.gov (United States)

Jeng, Jin-Tsong; Lee, Tsu-Tian

1999-03-01

In this paper, we propose a new nonlinear adaptive inverse control via a unified model neural network. In order to overcome nonsystematic design and long training time in nonlinear adaptive inverse control, we propose the approximate transformable technique to obtain a Chebyshev Polynomials Based Unified Model (CPBUM) neural network for the feedforward/recurrent neural networks. It turns out that the proposed method can use less training time to get an inverse model. Finally, we apply this proposed method to control magnetic bearing system. The experimental results show that the proposed nonlinear adaptive inverse control architecture provides a greater flexibility and better performance in controlling magnetic bearing systems.

Peningkatan performansi produksi dengan pendekatan lean six sigma

Directory of Open Access Journals (Sweden)

H. Harisupriyanto

2018-01-01

Full Text Available Abstrak Persaingan pasar tidak sekedar menjual produk akan tetapi membutuhkan kualitas produk yang semakin baik. Kondisi tersebut semakin penting bila dihubungkan dengan permintaan produk yang semakin tinggi. Untuk itu diperlukan pengolahan sumber daya yang semakin efisiensi dan effektif. Sering terjadi proses produksi berhenti dan ditaksir kerugian finansial yang tinggi. Terdapat aktifitas yang bersifat non value added. Aktifitas tersebut menyebabkan timbulnyalosses. Diperlukan cara untuk menelusuri penyebab terjadinya waste atau losses pada aktivitas produksi dengan pendekatan lean six sigma. Tools yang dipakai untuk mengidentifikasi permasalahan adalah E-DOWNTIME waste, RCA (root cause Analisys dan FMEA (Failure modes and effect analysis. Diperoleh hasil bahwavalue added activity sebesar 22%, necessary but non value added activity yaitu 44% dan nonvalue added activity sebesar 34%. Diperoleh tiga waste kritis yaitu waiting, defect dan excess processing waste. Nilai sigma awal pada defect waste yaitu sebesar 2.70;nilai sigma ini merupakan permasalahan. Rekomendasi perbaikan adalah pembuatan dan pengawasan SOP dan pengadaan pelatihan guna meningkatkan kemampuan dan keterampilan tenaga kerja. Terjadi kenaikan nilai sigma sampai 3.10 dan terjadi pengurangan biaya sampai 25%. Kata Kunci: Losses, activity, RCA, Lean, six-sigma Abstract The market competition is not just selling a product but needs a better product quality. That condition increasingly important when associated with higher product demand. It required the processing resources more efficient and effective.The production process often stops and estimated financial loss is high. There were indications of activities nonvalue added. These activities cause losses. Need a way to explore the causes of waste or losses in production activities with lean six- sigma approach.Tools used to identify the problem are E-DOWNTIME waste, RCA (root cause Analisys and FMEA (Failure modes and effects

Reduced-order modelling of parameter-dependent, linear and nonlinear dynamic partial differential equation models.

Science.gov (United States)

Shah, A A; Xing, W W; Triantafyllidis, V

2017-04-01

In this paper, we develop reduced-order models for dynamic, parameter-dependent, linear and nonlinear partial differential equations using proper orthogonal decomposition (POD). The main challenges are to accurately and efficiently approximate the POD bases for new parameter values and, in the case of nonlinear problems, to efficiently handle the nonlinear terms. We use a Bayesian nonlinear regression approach to learn the snapshots of the solutions and the nonlinearities for new parameter values. Computational efficiency is ensured by using manifold learning to perform the emulation in a low-dimensional space. The accuracy of the method is demonstrated on a linear and a nonlinear example, with comparisons with a global basis approach.

Six Sigma, absorptive capacity and organizational learning orientation

OpenAIRE

Gutiérrez Gutiérrez , Leopoldo J; Bustinza Sánchez , Oscar F; Barrales Molina , Vanesa

2011-01-01

Abstract The importance of the Six Sigma methodology in industry is growing constantly. However, there are few empirical studies that analyze the advantages of this methodology and its positive effects on organizational performance. The purpose of this paper is to extend understanding of the success of Six Sigma quality management initiatives by investigating the effects of Six Sigma teamwork and process management on absorptive capacity. It also seeks to understand the relation be...

Nonlinear GARCH model and 1 / f noise

Science.gov (United States)

Kononovicius, A.; Ruseckas, J.

2015-06-01

Auto-regressive conditionally heteroskedastic (ARCH) family models are still used, by practitioners in business and economic policy making, as a conditional volatility forecasting models. Furthermore ARCH models still are attracting an interest of the researchers. In this contribution we consider the well known GARCH(1,1) process and its nonlinear modifications, reminiscent of NGARCH model. We investigate the possibility to reproduce power law statistics, probability density function and power spectral density, using ARCH family models. For this purpose we derive stochastic differential equations from the GARCH processes in consideration. We find the obtained equations to be similar to a general class of stochastic differential equations known to reproduce power law statistics. We show that linear GARCH(1,1) process has power law distribution, but its power spectral density is Brownian noise-like. However, the nonlinear modifications exhibit both power law distribution and power spectral density of the 1 /fβ form, including 1 / f noise.

Model reduction of nonlinear systems subject to input disturbances

KAUST Repository

Ndoye, Ibrahima; Laleg-Kirati, Taous-Meriem

2017-01-01

The method of convex optimization is used as a tool for model reduction of a class of nonlinear systems in the presence of disturbances. It is shown that under some conditions the nonlinear disturbed system can be approximated by a reduced order

Calibration of the nonlinear ring model at the Diamond Light Source

Directory of Open Access Journals (Sweden)

R. Bartolini

2011-05-01

Full Text Available Nonlinear beam dynamics plays a crucial role in defining the performance of a storage ring. The beam lifetime, the injection efficiency, and the dynamic and momentum apertures available to the beam are optimized during the design phase by a proper optimization of the linear lattice and of the distribution of sextupole families. The correct implementation of the design model, especially the nonlinear part, is a nontrivial accelerator physics task. Several parameters of the nonlinear dynamics can be used to compare the real machine with the model and eventually to correct the accelerator. Most of these parameters are extracted from the analysis of turn-by-turn data after the excitation of betatron oscillations of the particles in the ring. We present the experimental results of the campaign of measurements carried out at the Diamond storage ring to characterize the nonlinear beam dynamics. A combination of frequency map analysis with the detuning with momentum measurements has allowed for a precise calibration of the nonlinear model that can accurately reproduce the nonlinear beam dynamics in Diamond.

Modeling vector nonlinear time series using POLYMARS

NARCIS (Netherlands)

de Gooijer, J.G.; Ray, B.K.

2003-01-01

A modified multivariate adaptive regression splines method for modeling vector nonlinear time series is investigated. The method results in models that can capture certain types of vector self-exciting threshold autoregressive behavior, as well as provide good predictions for more general vector

Likelihood-Based Inference in Nonlinear Error-Correction Models

DEFF Research Database (Denmark)

Kristensen, Dennis; Rahbæk, Anders

We consider a class of vector nonlinear error correction models where the transfer function (or loadings) of the stationary relation- ships is nonlinear. This includes in particular the smooth transition models. A general representation theorem is given which establishes the dynamic properties...... and a linear trend in general. Gaussian likelihood-based estimators are considered for the long- run cointegration parameters, and the short-run parameters. Asymp- totic theory is provided for these and it is discussed to what extend asymptotic normality and mixed normaity can be found. A simulation study...

Modeling of Macroeconomics by a Novel Discrete Nonlinear Fractional Dynamical System

Directory of Open Access Journals (Sweden)

Zhenhua Hu

2013-01-01

Full Text Available We propose a new nonlinear economic system with fractional derivative. According to the Jumarie’s definition of fractional derivative, we obtain a discrete fractional nonlinear economic system. Three variables, the gross domestic production, inflation, and unemployment rate, are considered by this nonlinear system. Based on the concrete macroeconomic data of USA, the coefficients of this nonlinear system are estimated by the method of least squares. The application of discrete fractional economic model with linear and nonlinear structure is shown to illustrate the efficiency of modeling the macroeconomic data with discrete fractional dynamical system. The empirical study suggests that the nonlinear discrete fractional dynamical system can describe the actual economic data accurately and predict the future behavior more reasonably than the linear dynamic system. The method proposed in this paper can be applied to investigate other macroeconomic variables of more states.

Application of homotopy-perturbation method to nonlinear population dynamics models

International Nuclear Information System (INIS)

Chowdhury, M.S.H.; Hashim, I.; Abdulaziz, O.

2007-01-01

In this Letter, the homotopy-perturbation method (HPM) is employed to derive approximate series solutions of nonlinear population dynamics models. The nonlinear models considered are the multispecies Lotka-Volterra equations. The accuracy of this method is examined by comparison with the available exact and the fourth-order Runge-Kutta method (RK4)

An application of six sigma for SMEs: A case study

Directory of Open Access Journals (Sweden)

Prabhakar Kaushik

2017-03-01

Full Text Available Six Sigma is the concept of improving the quality by reducing process variations, making con-tinuous improvements, reducing defect rates and improving the processes. Initially, the concept of Six Sigma focused on defect reduction, cost reduction and value addition. Fundamentally the basic idea of Six Sigma is to improve the process-capability and making the process more relia-ble along with reducing wastes within industries. Evaluation the implication of applying Six Sigma over the small and medium-sized enterprises is the main purpose of this research work taking a particular case of automobile industries. In the present work, DMAIC methodology of Six Sigma is used to a small seat slider lock nut manufacturing unit to reduce the play issue in K2 seat slider lock in automobile units by reducing defects inherent in the process. After apply-ing Six Sigma methodology, it was found that manufacturing units could earn profits in terms of reducing the wastage as well as improving the quality standard of the product by controlling the play issue in seat slider lock nut mechanism. Result shows that with the application of Six Sig-ma, process, sigma level brought up to 5.53σ from 1.59σ by varying the seat slider lock nut di-mensions/size.

Modelling and control of a nonlinear magnetostrictive actuator system

Science.gov (United States)

Ramli, M. H. M.; Majeed, A. P. P. Abdul; Anuar, M. A. M.; Mohamed, Z.

2018-04-01

This paper explores the implementation of a feedforward control method to a nonlinear control system, in particular, Magnetostrictive Actuators (MA) that has excellent properties of energy conversion between the mechanical and magnetic form through magnetostriction effects which could be used in actuating and sensing application. MA is known to exhibit hysteresis behaviour and it is rate dependent (the level of hysteresis depends closely on the rate of input excitation frequency). This is, nonetheless, an undesirable behaviour and has to be eliminated in realising high precision application. The MA is modelled by a phenomenological modelling approach via Prandtl-Ishlinskii (P-I) operator to characterise the hysteresis nonlinearities. A feedforward control strategy is designed and implemented to linearize and eliminate the hysteresis by model inversion. The results show that the P-I operator has the capability to model the hysteretic nonlinearity of MA with an acceptable accuracy. Furthermore, the proposed control scheme has demonstrated to be effective in providing superior trajectory tracking.

DEALING WITH KANO MODEL DYNAMICS: STRENGTHENING THE QUALITY FUNCTION DEPLOYMENT AS A DESIGN FOR SIX SIGMA TOOL

Directory of Open Access Journals (Sweden)

Hendry Raharjo

2007-01-01

Full Text Available Six Sigma has been known to be a breakthrough business strategy to achieve customer satisfaction through defect reduction and cost optimization. A flawless product or service would, however, be of little value if it does not sell. Thus, it is of considerable importance to begin with the customer. Quality Function Deployment (QFD, as a customer-driven tool in Design for Six Sigma (DFSS toolset, can be regarded as one of the most powerful tools to serve this purpose. The success of QFD use relies heavily on the accuracy of the primary input, that is, the Voice of the Customer (VOC. To better identify and obtain more accurate VOC, the use of Kano Model in QFD has been incorporated in the literature. Unfortunately, the dynamics of Kano Model, such as the fact that what now delights the customer will become an expected need in the future is often oversimplified and has not been adequately addressed. The aim of this paper is to shed some light to Kano Model dynamics modeling by providing a quantitative technique which is based on compositional data analysis. It is expected that a timely update of customer needs data may serve as a useful indicator to monitor the progress of how well a company satisfies its customer over time, and at the same time provide a ground for formulating the next strategies as to enable the company to respond differently and continuously over time of its operations. To give some practical insights, an illustrative example is provided.

Chiral Lagrangians and quark condensate in nuclei

International Nuclear Information System (INIS)

Delorme, J.; Chanfray, G.; Ericson, M.

1996-03-01

The evolution of density of quark condensate in nuclear medium with interacting nucleons, including the short range correlations is examined. Two chiral models are used, the linear sigma model and the non-linear one. It is shown that the quark condensate, as other observables, is independent on the variant selected. The application to physical pions excludes the linear sigma model as a credible one. The non-linear models restricted to pure s-wave pion-nucleon scattering are examined. (author)

Nonlinear Filtering with IMM Algorithm for Ultra-Tight GPS/INS Integration

Directory of Open Access Journals (Sweden)

Dah-Jing Jwo

2013-05-01

Full Text Available Abstract This paper conducts a performance evaluation for the ultra-tight integration of a Global positioning system (GPS and an inertial navigation system (INS, using nonlinear filtering approaches with an interacting multiple model (IMM algorithm. An ultra-tight GPS/INS architecture involves the integration of in-phase and quadrature components from the correlator of a GPS receiver with INS data. An unscented Kalman filter (UKF, which employs a set of sigma points by deterministic sampling, avoids the error caused by linearization as in an extended Kalman filter (EKF. Based on the filter structural adaptation for describing various dynamic behaviours, the IMM nonlinear filtering provides an alternative for designing the adaptive filter in the ultra-tight GPS/INS integration. The use of IMM enables tuning of an appropriate value for the process of noise covariance so as to maintain good estimation accuracy and tracking capability. Two examples are provided to illustrate the effectiveness of the design and demonstrate the effective improvement in navigation estimation accuracy. A performance comparison among various filtering methods for ultra-tight integration of GPS and INS is also presented. The IMM based nonlinear filtering approach demonstrates the effectiveness of the algorithm for improved positioning performance.

Six Sigma als blauwdruk voor de kenniseconomie.

NARCIS (Netherlands)

de Mast, J.; Does, R.J.M.M.

2005-01-01

Abstract Six Sigma is zo langzamerhand een niet weg te denken programma voor kwaliteits- en efficiencyverbeteringen. Het heeft met name voor enorme successen gezorgd in productiebedrijven. Six Sigma ligt ook onder vuur: het zou een trend zijn die voorbij gaat. De auteurs van dit artikel zijn het van

Parametric model of servo-hydraulic actuator coupled with a nonlinear system: Experimental validation