WorldWideScience

Sample records for nonlinear directional coupler

  1. Analysis of Nonlinear Directional Couplers

    Institute of Scientific and Technical Information of China (English)

    M. Liu P. Shum; N. Q. Ngo

    2003-01-01

    @@ 1 Introduction Since the coupled-mode theory in cylindrical optical-fiber systems was proposed in 1972, the optical coupling between parallel optical waveguides has been a matter of scientific concern. Two-core fiber couplers, especially, have been studied extensively since the success of producing a two-core fiber functioning as a directional coupler in 1980. The wavelength and polarization selectivity of two-core fibers can find many applications. The nonlinear properties of the two-core fiber coupler were also inspected with the realization of an ultrafast all-optical switch.

  2. The Asymmetric Active Coupler: Stable Nonlinear Supermodes and Directed Transport

    CERN Document Server

    Kominis, Yannis; Flach, Sergej

    2016-01-01

    We consider the asymmetric active coupler (AAC) consisting of two coupled dissimilar waveguides with gain and loss. We show that under generic conditions, not restricted by parity-time symmetry, there exist finite-power, constant-intensity nonlinear supermodes (NS), resulting from the balance between gain, loss, nonlinearity, coupling and dissimilarity. The system is shown to possess nonreciprocal dynamics enabling directed power transport and optical isolation functionality.

  3. Modeling of racetrack-resonator add-drop filters with arbitrary nonlinear directional couplers.

    Science.gov (United States)

    Gómez-Alcalá, Rafael; Fraile-Peláez, F Javier; Chamorro-Posada, Pedro; Díaz-Otero, Francisco J

    2012-06-01

    In this Letter we employ the general coupled-mode equations of the nonlinear directional coupler and demonstrate that the switching characteristics of prototypical nonlinear racetrack-resonator structures may differ considerably from those obtained when the standard, generally incorrect, coupled-mode equations are used.

  4. Solitary wave generation from continuum in asymmetric oppositely directed nonlinear waveguide coupler

    Science.gov (United States)

    Kazantseva, E. V.; Maimistov, A. I.

    2016-08-01

    In a model which describes asymmetric oppositely directed nonlinear waveguide coupler it was observed in the numerical simulation a phenomenon of solitary wave formation from the input constant continuous wave set at the entrance of a waveguide with negative index of refraction. Threshold value of the amplitude of the constant continuous wave, which defines the condition of appearance of the first solitary wave, decreases with increasing of the parameter of nonlinearity. The period of solitary wave formation decreases with increasing of the continuum wave amplitude.

  5. Soliton switching in directional couplers

    NARCIS (Netherlands)

    Valkering, T.P.; Hoekstra, Hugo; de Boer, Pieter-Tjerk

    1999-01-01

    The mechanism of pulse switching is investigated analytically and numerically for a family of initial conditions with a solitonlike pulse in one channel and no signal on the other channel of the coupler. This investigation is performed directly in the coupled nonlinear Schroedinger equations that

  6. Broadband terahertz fiber directional coupler

    DEFF Research Database (Denmark)

    Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd

    2010-01-01

    We present the design of a short broadband fiber directional coupler for terahertz (THz) radiation and demonstrate a 3 dB coupler with a bandwidth of 0:6 THz centered at 1:4 THz. The broadband coupling is achieved by mechanically downdoping the cores of a dual-core photonic crystal fiber...

  7. Multimode waveguide based directional coupler

    Science.gov (United States)

    Ahmed, Rajib; Rifat, Ahmmed A.; Sabouri, Aydin; Al-Qattan, Bader; Essa, Khamis; Butt, Haider

    2016-07-01

    The Silicon-on-Insulator (SOI) based platform overcomes limitations of the previous copper and fiber based technologies. Due to its high index difference, SOI waveguide (WG) and directional couplers (DC) are widely used for high speed optical networks and hybrid Electro-Optical inter-connections; TE00-TE01, TE00-TE00 and TM00-TM00 SOI direction couplers are designed with symmetrical and asymmetrical configurations to couple with TE00, TE01 and TM00 in a multi-mode semi-triangular ring-resonator configuration which will be applicable for multi-analyte sensing. Couplers are designed with effective index method and their structural parameters are optimized with consideration to coupler length, wavelength and polarization dependence. Lastly, performance of the couplers are analyzed in terms of cross-talk, mode overlap factor, coupling length and coupling efficiency.

  8. Zeno effect and switching of solitons in nonlinear couplers

    DEFF Research Database (Denmark)

    Abdullaev, F Kh; Konotop, V V; Ögren, Magnus;

    2011-01-01

    The Zeno effect is investigated for soliton type pulses in a nonlinear directional coupler with dissipation. The effect consists in increase of the coupler transparency with increase of the dissipative losses in one of the arms. It is shown that localized dissipation can lead to switching...

  9. Fractal scattering of Gaussian solitons in directional couplers with logarithmic nonlinearities

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Rafael M.P.; Cardoso, Wesley B., E-mail: wesleybcardoso@gmail.com

    2016-08-12

    In this paper we study the interaction of Gaussian solitons in a dispersive and nonlinear media with log-law nonlinearity. The model is described by the coupled logarithmic nonlinear Schrödinger equations, which is a nonintegrable system that allows the observation of a very rich scenario in the collision patterns. By employing a variational approach and direct numerical simulations, we observe a fractal-scattering phenomenon from the exit velocities of each soliton as a function of the input velocities. Furthermore, we introduce a linearization model to identify the position of the reflection/transmission window that emerges within the chaotic region. This enables us the possibility of controlling the scattering of solitons as well as the lifetime of bound states. - Highlights: • We study the interaction of Gaussian solitons in a system with log-law nonlinearity. • The model is described by the coupled logarithmic nonlinear Schrödinger equations. • We observe a fractal-scattering phenomenon of the solitons.

  10. Experimental study of nonlinear switching characteristics of conventional 2 × 2 fused tapered couplers

    Institute of Scientific and Technical Information of China (English)

    Feng Liu; Qing Ye; Aiping Luo; Jianrong Qiu; Congshan Zhu; Ronghui Qu; Zujie Fang

    2005-01-01

    The nonlinear switching characteristics of fused fiber directional couplers were studied experimentally. By using femtosecond laser pulses with pulse width of 100 fs and wavelength of about 1550 nm from a system of Ti:sapphire laser and optical parametric amplifier (OPA), the nonlinear switching properties of a null coupler and a 100% coupler were measured. The experimental results were coincident with the simulations based on nonlinear propagation equations in fiber by using super-mode theory. Nonlinear loss in fiber was also measured to get the injected power at the coupler. After deducting the nonlinear loss and input efficiency, the nonlinear switching critical peak powers for a 100% and a null fused couplers were calculated to be 9410 and 9440 W, respectively. The nonlinear loss parameter PN in an expression of αNL = αP/PN was obtained to be PN = 0.23 W.

  11. Study of the Performance of an All-Optical Half-Adder Based on Three-Core Non-Linear Directional Fiber Coupler Under Delayed and Instantaneous Non-Linear Kerr Responses

    Science.gov (United States)

    Menezes, J. W. M.; Fraga, W. B.; Lima, F. T.; Guimarães, G. F.; Ferreira, A. C.; Lyra, M. L.; Sombra, A. S. B.

    2011-06-01

    Recently, much attention has been given to the influence of the relaxation process of the non-linear response, because the usual assumption of instantaneous non-linear response fails for ultra-short pulses, and additional contributions coming from non-linear dispersion and delayed non-linearity have to be taken into account. This article presents a numerical analysis of the symmetric planar and asymmetric planar three-core non-linear directional fiber couplers operating with a soliton pulse, where effects of both delayed and instantaneous non-linear Kerr responses are analyzed for implementation of an all-optical half-adder. To implement this all-optical half-adder, eight configurations were analyzed for the non-linear directional fiber coupler, with two symmetric and six asymmetric configurations. The half-adder is the key building block for many digital processing functions, such as shift register, binary counter, and serial parallel data converters. The optical coupler is an important component for applications in optical-fiber telecommunication systems and all integrated optical circuit because of its very high switching speeds. In this numerical simulation, the symmetric/asymmetric planar presents a structure with three cores in a parallel equidistant arrangement, three logical inputs, and two output energy. To prove the effectiveness of the theoretical model for generation of the all-optical half-adder, the best phase to be applied to the control pulse was sought, and a study was done of the extinction ratio level as a function of the Δ > parameter, the normalized time duration, and the Sum and Carry outputs of the (symmetric planar/asymmetric planar) non-linear directional fiber coupler. In this article, the interest is in transmission characteristics, extinction ratio level, normalized time duration, and pulse evolution along the non-linear directional fiber coupler. To compare the performance of the all-optical half-adders, the figure of merit of the

  12. Generalized Analytical Solutions for Nonlinear Positive-Negative Index Couplers

    Directory of Open Access Journals (Sweden)

    Zh. Kudyshev

    2012-01-01

    Full Text Available We find and analyze a generalized analytical solution for nonlinear wave propagation in waveguide couplers with opposite signs of the linear refractive index, nonzero phase mismatch between the channels, and arbitrary nonlinear coefficients.

  13. Optical gears in a nanophotonic directional coupler

    CERN Document Server

    Zhang, Fengchun; Zhang, Heran; Zhang, Yong; Huang, Xu-Guang; Jia, Baohua; Liu, Songhao

    2016-01-01

    Gears are rotating machines, meshing with each other by teeth to transmit torque. Interestingly, the rotating directions of two meshing gears are opposite, clockwise and counterclockwise. Although this opposite handedness motion has been widely investigated in machinery science, the analogue behavior of photons remains undiscovered. Here, we present a simple nanophotonic directional coupler structure which can generate two meshing gears of angular momentum (AM) of light, optical gears. Due to the abrupt phase shift effect and birefringence effect, the AM states of photons vary with the propagation distance in two adjacent waveguides of the coupler. Thus, by the choice of coupling length, it is able to obtain two light beams with opposite handedness of AM, confirming the appearance of optical gears. The full control in the handedness of output beams is achieved via tuning the relative phase between two orthogonal modes at the input ports. Optical gears thus offer the possibility of exploring light-matter inter...

  14. Solitary Wave Generation from Constant Continuous Wave in Asymmetric Oppositely Directed Waveguide Coupler

    Directory of Open Access Journals (Sweden)

    Kazantseva E.V.

    2015-01-01

    Full Text Available In a model which describes asymmetric oppositely directed nonlinear coupler it was observed in numerical simulations a phenomenon of solitary wave generation from the input constant continuous wave set at the entrance of a waveguide with negative refraction. The period of solitary wave formation decreases with increase of the continuum wave amplitude.

  15. All-optical switching using a new photonic crystal directional coupler

    Directory of Open Access Journals (Sweden)

    B. Vakili

    2015-07-01

    Full Text Available In this paper all-optical switching in a new photonic crystal directional coupler is performed.  The structure of the switch consists of a directional coupler and a separate path for a control signal called “control waveguide”. In contrast to the former reported structures in which the directional couplers are made by removing a row of rods entirely, the directional coupler in our optical switch is constructed by two reduced-radius line-defect waveguides separated by the control waveguide. Furthermore, in our case the background material has the nonlinear Kerr property. Therefore, in the structure of this work, no frequency overlap occurs between the control waveguide mode and the directional coupler modes. It is shown that such a condition provides a very good isolation between the control and the probe signals at the output ports. In the control waveguide, nonlinear Kerr effect causes the required refractive index change by the presence of a high power control (pump signal. Even and odd modes of the coupler are investigated by applying the distribution of the refractive index change in the nonlinear region of a super-cell so that a switching length of about 94 µm is obtained at the wavelength of 1.55 µm. Finally, all-optical switching of the 1.55 µm probe signal using a control signal at the wavelength of 1.3 µm, is simulated through the finite-difference time-domain method, where both signals are desirable in optical communication systems. A very high extinction ratio of 67 dB is achieved and the temporal characteristics of the switch are demonstrated.

  16. Artificial Neural Network Model for Optical Fiber Direction Coupler Design

    Institute of Scientific and Technical Information of China (English)

    李九生; 鲍振武

    2004-01-01

    A new approach to the design of the optical fiber direction coupler by using neural network is proposed. To train the artificial neural network,the coupling length is defined as the input sample, and the coupling ratio is defined as the output sample. Compared with the numerical value calculation of the theoretical formula, the error of the neural network model output is 1% less.Then, through the model, to design a broadband or a single wavelength optical fiber direction coupler becomes easy. The method is proved to be reliable, accurate and time-saving. So it is promising in the field of both investigation and application.

  17. Nonlinear modal propagation analysis method in multimode interference coupler for operation development

    Science.gov (United States)

    Tajaldini, Mehdi; Mat Jafri, Mohd Zubir Mat

    2013-05-01

    In this study, we propose a novel approach that is called nonlinear modal propagation analysis method (NMPA) in MMI coupler via the enhances of nonlinear wave propagation in terms of guided modes interferences in nonlinear regimes, such that the modal fields are measurable at any point of coupler and output facets. Then, the ultra-short MMI coupler is optimized as a building block in micro ring resonator to investigate the method efficiency against the already used method. Modeling results demonstrate more efficiency and accuracy in shorter lengths of multimode interference coupler. Therefore, NMPA can be used as a method to study the compact dimension coupler and for developing the performance in applications. Furthermore, the possibility of access tothe all-optical switching is assumed due to one continuous MMI for proof of the development of performances in nonlinear regimes.

  18. Two-mode optical state truncation and generation of maximally entangled states in pumped nonlinear couplers

    CERN Document Server

    Miranowicz, A; Miranowicz, Adam; Leonski, Wieslaw

    2006-01-01

    Schemes for optical-state truncation of two cavity modes are analysed. The systems, referred to as the nonlinear quantum scissors devices, comprise two coupled nonlinear oscillators (Kerr nonlinear coupler) with one or two of them pumped by external classical fields. It is shown that the quantum evolution of the pumped couplers can be closed in a two-qubit Hilbert space spanned by vacuum and single-photon states only. Thus, the pumped couplers can behave as a two-qubit system. Analysis of time evolution of the quantum entanglement shows that Bell states can be generated. A possible implementation of the couplers is suggested in a pumped double-ring cavity with resonantly enhanced Kerr nonlinearities in an electromagnetically-induced transparency scheme. The fragility of the generated states and their entanglement due to the standard dissipation and phase damping are discussed by numerically solving two types of master equations.

  19. Switching dynamics of a two-dimensional nonlinear couplers in a photopolymer – A variational approach

    Indian Academy of Sciences (India)

    T Uthayakumar; K Porsezian

    2010-11-01

    We study the optical switching of the two-dimensional nonlinear coupler in a doped photopolymer. The coupled nonlinear Schrödinger equations (CNLSEs) describing our coupler system are analysed using Lagrangian variational method. From the Lagrangian, a set of coupled ordinary differential equations (ODEs) describing the system dynamics is obtained. This set of ODE’s is further reduced to single coupled equation and an analytical solution is obtained using the cnoidal functions and the system dynamics is studied. The key factor for switching mechanism of our coupler system is the metal-induced surface plasmon resonance (SPR). This SPR-induced local nonlinear effects results in self-focussing of the optical beam through the launched core. A description of a particle in a well is also made to study the photon switching through the coupler system.

  20. Hybrid silicon plasmonic organic directional coupler-based modulator

    Science.gov (United States)

    Abdelatty, M. Y.; Zaki, A. O.; Swillam, M. A.

    2017-01-01

    An optical directional coupler (ODC)-based hybrid plasmonic waveguide is designed and demonstrated with a power splitting mechanism that can be tuned by applying an external electric field. The tuning mechanism takes the advantage of electro-optic properties of the embedded polymer layer. The ODC operates under 1550 nm telecommunication wavelength. A finite element method with a perfect matching layer, absorbing boundary condition, is taken up to simulate and analyze the ODC.

  1. Exact control of parity-time symmetry in periodically modulated nonlinear optical couplers

    CERN Document Server

    Yang, Baiyuan; Hu, QiangLin; Yu, XiaoGuang

    2016-01-01

    We propose a mechanism for realization of exact control of parity-time (PT) symmetry by using a periodically modulated nonlinear optical coupler with balanced gain and loss. It is shown that for certain appropriately chosen values of the modulation parameters, we can construct a family of exact analytical solutions for the two-mode equations describing the dynamics of such nonlinear couplers. These exact solutions give explicit examples that allow us to precisely manipulate the system from nonlinearity-induced symmetry breaking to PT symmetry, thus providing an analytical approach to the all-optical signal control in nonlinear PT-symmetric structures.

  2. Nonideal effects in quantum field-effect directional coupler

    Institute of Scientific and Technical Information of China (English)

    Xie Yue-E; Yan Xiao-Hong; Chen Yuan-Ping

    2006-01-01

    The nonideal effects in a quantum field-effect directional coupler where two quantum wires are coupled through a finite potential barrier are studied by adopting the lattice Green function method. The results show that the electron energy distribution, asymmetric geometry and finite temperature all have obvious influence on the electron transfer of the coupler. Only for the electrons with energies in a certain region, can the complete periodic transfer between two quantum wires take place. The conductance of these electrons as a function of the barrier length and potential height exhibits a fine periodic or quasi-periodic pattern. For the electrons with energies beyond the region, however, the complete periodic transfer does not hold any more since many irregular oscillations are superimposed on the conductance profile. In addition, the finite temperature and asymmetric geometry both can reduce the electron transfer efficiency.

  3. Directional Nanoslit-Bump Coupler for Surface Plasmon Polaritons

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yong-Liang; ZHAO De-Yin; ZHOU Chuan-Hong; JIANG Xun-Ya

    2008-01-01

    We investigate a p-polarized plane wave transmitted through a metallic slit-bump nanostructure using the finite difference time domain simulation.It is found that narrow bumps with suitable separation can diffract surface plasmons into highly directional collimating beams,The number and directionality of the beams can be controlled by adjusting the geometry parameters of the nanostructure.The structure with optimized parameters may be interesting for practical applications as directional nanoslit SPP-light coupler in integrated photonic devices.

  4. Near-field probing of photonic crystal directional couplers

    DEFF Research Database (Denmark)

    Volkov, V. S.; Bozhevolnyi, S. I.; Borel, Peter Ingo

    2006-01-01

    . By comparing the near-field optical images recorded in and after the directional coupler area, the features of light distribution are analyzed. Finally, the scanning near-field optical microscope observations are found to be in agreement with the transmission measurements conducted with the same sample.......We report the design, fabrication and characterization of a photonic crystal directional with a size of ~20 x 20 mm2 fabricated in silicon-on-insulator material. Using a scanning near-field optical microscope we demonstrate a high coupling efficiency for TM polarized light at telecom wavelengths...

  5. Stability Analysis of Fixed points in a Parity-time symmetric coupler with Kerr nonlinearity

    CERN Document Server

    Deka, Jyoti Prasad

    2016-01-01

    We report our study on nonlinear parity-time (PT) symmetric coupler from a dynamical perspective. In the linear regime, the differential equations governing the dynamics of the coupler, under some parametric changes, can be solved exactly. But with the inclusion of nonlinearity, analytical solution of the system is a rather complicated job. And the sensitiveness of the system on the initial conditions is yet another critical issue. To circumvent the situation, we have employed the mathematical framework of nonlinear dynamics. Considering the parity-time threshold of the linear PT-coupler as the reference point, we find that in nonlinear coupler the parity-time symmetric threshold governs the existence of fixed points. We have found that the stability of the ground state undergoes a phase transition when the gain/loss coefficient is increased from zero to beyond the PT threshold. In the unbroken PT regime, we find that the instabilities in the initial launch conditions can trigger an exponential growth and dec...

  6. A theoretical study on threshold conditions of modulation instability in oppositely directed couplers

    Science.gov (United States)

    Porsezian, K.; Shafeeque Ali, A. K.; Nithyanandan, K.

    2016-12-01

    We theoretically investigate threshold conditions to observe modulation instability (MI) in a two-core nonlinear oppositely directed coupler (ODC) with a negative-index material (NIM) channel. Using linear stability analysis, we obtain an expression for the instability gain. The analysis shows, with two discrete instability regions, that the band at lower values of f (ratio of the backward to forward-propagating waves amplitude) is a result of the nonlinear positive index material (PIM) channel while the broader range band is a consequence of the nonlinear NIM channel. Both bands are highly sensitive to system parameters. We demonstrate that MI has a threshold-like condition in the normal dispersion regime. This study also shows that gain increases proportionally to power increases and the two instability regions approach each other, thereby narrowing the stability region. Furthermore, we report that the effect of pump power and the coupling coefficient on instability gain have an opposite relationship. Similarly, study of the influence of the nonlinear coefficient on critical power (P c ) shows that P c gradually decreases as the nonlinear coefficient increases. Thus, a comprehensive study on the influence of various physical effects on MI is reported in this paper.

  7. Influence of group—velocity mismatch on soliton switching in a nonlinear fibre coupler

    Institute of Scientific and Technical Information of China (English)

    LiHong; HuangDe-Xiu; WangDong-Ning

    2003-01-01

    In this work, the influence of group-velocity mismatch on soliton self-routing pulse switching in a nonlinear fibre coupler is discussed in detail by the use of both variational approach and numerical simulation. The results obtained show that the group-velocity mismatch leads to the relative displacement between the two orthogonal polarization modes, increase of the critical power, and reduction of the elimination-light ratio. For sub-ps pulse, the influence cannot be neglected.

  8. All-optical switching in optically induced nonlinear waveguide couplers

    Energy Technology Data Exchange (ETDEWEB)

    Diebel, Falko, E-mail: falko.diebel@uni-muenster.de; Boguslawski, Martin; Rose, Patrick; Denz, Cornelia [Institut für Angewandte Physik and Center for Nonlinear Science (CeNoS), Westfälische Wilhelms-Universität Münster, 48149 Münster (Germany); Leykam, Daniel; Desyatnikov, Anton S. [Nonlinear Physics Centre, Research School of Physics and Engineering, The Australian National University, Canberra ACT 0200 (Australia)

    2014-06-30

    We experimentally demonstrate all-optical vortex switching in nonlinear coupled waveguide arrays optically induced in photorefractive media. Our technique is based on multiplexing of nondiffracting Bessel beams to induce various types of waveguide configurations. Using double- and quadruple-well potentials, we demonstrate precise control over the coupling strength between waveguides, the linear and nonlinear dynamics and symmetry-breaking bifurcations of guided light, and a power-controlled optical vortex switch.

  9. Design and Optimization of Air-Doped 3-dB Terahertz Fiber Directional Couplers

    DEFF Research Database (Denmark)

    Bao, Hualong; Nielsen, Kristian; Rasmussen, Henrik K.;

    2014-01-01

    We present a thorough practical design optimization of broadband low loss, terahertz (THz) photonic crystal fiber directional couplers in which the two cores are mechanically down- doped with a triangular array of air holes.......We present a thorough practical design optimization of broadband low loss, terahertz (THz) photonic crystal fiber directional couplers in which the two cores are mechanically down- doped with a triangular array of air holes....

  10. Design of a Compact X-Band Substrate Integrated Waveguide Directional Coupler

    Directory of Open Access Journals (Sweden)

    B. H. Ahmad

    2013-04-01

    Full Text Available This paper presented the design of four-port network directional coupler at X-band frequency (8.2-12.4 GHz by using substrate integrated waveguide (SIW technique. SIW appears few years backwhich provides an excellent platform in order to design millimeter-wave circuits such as filter, antenna,resonator, coupler and power divider. It offers great compensation for smaller size and can be easily integrated with other planar circuits. The fabrication process can simply be done by using standard Printed Circuit Board (PCB process where the cost of the manufacturing process will be reduced compared to the conventional waveguide. The directional coupler basically implemented at radar, satellite and point-to-point radio. The simulations for this SIW directional coupler design shows good performances with low insertion loss, low return loss, broad operational bandwidth and have high isolation.

  11. Ultrafast laser inscription of mid-IR directional couplers for stellar interferometry

    CERN Document Server

    Arriola, Alexander; Choudhury, Debaditya; Labadie, Lucas; Thomson, Robert R

    2014-01-01

    We report the ultrafast laser fabrication and mid-IR characterization (3.39 microns) of four-port evanescent field directional couplers. The couplers were fabricated in a commercial gallium lanthanum sulphide glass substrate using sub-picosecond laser pulses of 1030 nm light. Straight waveguides inscribed using optimal fabrication parameters were found to exhibit propagation losses of 0.8 dB/cm. A series of couplers were inscribed with different interaction lengths, and we demonstrate power splitting ratios of between 8% and 99% for mid-IR light with a wavelength of 3.39 microns. These results clearly demonstrate that ultrafast laser inscription can be used to fabricate high quality evanescent field couplers for future applications in astronomical interferometry.

  12. Ultrafast laser inscription of mid-IR directional couplers for stellar interferometry.

    Science.gov (United States)

    Arriola, Alexander; Mukherjee, Sebabrata; Choudhury, Debaditya; Labadie, Lucas; Thomson, Robert R

    2014-08-15

    We report the ultrafast laser fabrication and mid-IR characterization (3.39 μm) of four-port evanescent field directional couplers. The couplers were fabricated in a commercial gallium lanthanum sulfide glass substrate using sub-picosecond laser pulses of 1030 nm light. Straight waveguides inscribed using optimal fabrication parameters were found to exhibit propagation losses of ∼0.8 dB·cm(-1). A series of couplers were inscribed with different interaction lengths, and we demonstrate power-splitting ratios of between 8% and 99% for mid-IR light with a wavelength of 3.39 μm. These results clearly demonstrate that ultrafast laser inscription can be used to fabricate high-quality evanescent field couplers for future applications in astronomical interferometry.

  13. Dynamics of higher-order solitons in regular and PT-symmetric nonlinear couplers

    CERN Document Server

    Driben, R

    2012-01-01

    Dynamics of symmetric and antisymmetric 2-solitons and 3-solitons is studied in the model of the nonlinear dual-core coupler and its PT-symmetric version. Regions of the convergence of the injected perturbed symmetric and antisymmetric N-solitons into symmetric and asymmetric quasi-solitons are found. In the PT-symmetric system, with the balanced gain and loss acting in the two cores, borders of the stability against the blowup are identified. Notably, in all the cases the stability regions are larger for antisymmetric 2-soliton inputs than for their symmetric counterparts, on the contrary to previously known results for fundamental solitons (N=1). Dynamical regimes (switching) are also studied for the 2-soliton injected into a single core of the coupler. In particular, a region of splitting of the input into a pair of symmetric solitons is found, which is explained as a manifestation of the resonance between the vibrations of the 2-soliton and oscillations of energy between the two cores in the coupler.

  14. All-optical logical gates based on pump-induced resonant nonlinearity in an erbium-doped fiber coupler.

    Science.gov (United States)

    Li, Qiliang; Zhang, Zhen; Li, Dongqiang; Zhu, Mengyun; Tang, Xianghong; Li, Shuqin

    2014-12-01

    In this paper, we theoretically investigate all-optical logical gates based on the pump-induced resonant nonlinearity in an erbium-doped fiber coupler. The resonant nonlinearity yielded by the optical transitions between the (4)I(15/2) states and (4)I(13/2) states in Er(3+) induces the refractive index to change, which leads to switching between two output ports. First, we do a study on the switching performance, and calculate the extinction ratio (Xratio) of the device. Second, using the Xratio, we obtain the truth tables of the device. The results reveal that compared with other undoped nonlinear couplers, the erbium-doped fiber coupler can drop the switching threshold power. We also obtain different logic gates and logic operations in the cases of the same phase and different phase of two initial signals by changing the pump power.

  15. High-performance cryogenic fractal 180° hybrid power divider with integrated directional coupler

    Science.gov (United States)

    Ladu, Adelaide; Montisci, Giorgio; Valente, Giuseppe; Navarrini, Alessandro; Marongiu, Pasqualino; Pisanu, Tonino; Mazzarella, Giuseppe

    2017-06-01

    A 180° hybrid and a directional coupler to be employed in the P-band cryogenic receiver of the Sardinia Radio Telescope are proposed in this work. An in-depth study of the issues related to the use of microwave components for cryogenic radio astronomy receivers is carried out to select the best suited technology and configuration. As a result, a planar fractal 180° hybrid configuration available in the literature has been optimized aiming to increase the operating bandwidth in order to comply with the design specifications of the application at hand. A coupled line directional coupler with weak coupling and high isolation, used to calibrate the receiver chain, is cascaded to the 180° hybrid and realized in the same layout. The final device, consisting of the 180° hybrid and the directional coupler, has been manufactured and tested at the cryogenic temperature of 20 K, showing a good agreement between experimental results and predicted performance.

  16. Femtosecond laser fabrication of birefringent directional couplers as polarization beam splitters in fused silica.

    Science.gov (United States)

    Fernandes, Luís A; Grenier, Jason R; Herman, Peter R; Aitchison, J Stewart; Marques, Paulo V S

    2011-06-20

    Integrated polarization beam splitters based on birefringent directional couplers are demonstrated. The devices are fabricated in bulk fused silica glass by femtosecond laser writing (300 fs, 150 nJ at 500 kHz, 522 nm). The birefringence was measured from the spectral splitting of the Bragg grating resonances associated with the vertically and horizontally polarized modes. Polarization splitting directional couplers were designed and demonstrated with 0.5 dB/cm propagation losses and -19 dB and -24 dB extinction ratios for the polarization splitting.

  17. InGaN directional coupler made with a one-step etching technique

    Science.gov (United States)

    Gao, Xumin; Yuan, Jialei; Yang, Yongchao; Zhang, Shuai; Shi, Zheng; Li, Xin; Wang, Yongjin

    2017-06-01

    We propose, fabricate and characterize an on-chip integration of light source, InGaN waveguide, directional coupler and photodiode, in which AlGaN layers are used as top and bottom optical claddings to form an InGaN waveguide for guiding the in-plane emitted light from the InGaN/GaN multiple-quantum-well light-emitting diode (MQW-LED). The difference in etch rate caused by different exposure windows leads to an etching depth discrepancy using the one-step etching technique, which forms the InGaN directional coupler with the overlapped underlying slab. Light propagation results directly confirm effective light coupling in the InGaN directional coupler, which is achieved through high-order guided modes. The InGaN waveguide couples the modulated light from the InGaN/GaN MQW-LED and transfers part of light to the coupled waveguide via the InGaN directional coupler. The in-plane InGaN/GaN MQW-photodiode absorbs the guided light by the coupled InGaN waveguide and induces the photocurrent. The on-chip InGaN photonic integration experimentally demonstrates an in-plane light communication with a data transmission of 50 Mbps.

  18. A Compact, High Power Capable, and Tunable High Directivity Microstrip Coupler.

    Science.gov (United States)

    Sohn, Sung-Min; Gopinath, Anand; Vaughan, John Thomas

    2016-10-01

    A coupler is an indispensable component to sample the forward and reflected power for the real-time radio frequency (RF) power monitoring system. The directivity of a coupler is a critical factor to achieve accurate RF power measurements. This paper proposes a microstrip coupler with a tunable high directivity circuit to accurately measure the reflected RF power. The directivity tuner composed of passive components adjusts phase and amplitude of the coupled RF signal, and cancel out the leakage signal from the RF input port at the coupled reflection port. The experimental results, which agree with simulation results, show that the microstrip coupler with the directivity tuner circuit has a compact size (~ 0.07 λg x 0.05 λg), high power capability (up to 1 kW), and high directivities (more than 40 dB) at operating frequency bands (f = 297.3 MHz, 400 MHz, and 447 MHz, respectively) for magnetic resonance imaging (MRI) applications.

  19. Bi-directional triplexer with butterfly MMI coupler using SU-8 polymer waveguides

    Science.gov (United States)

    Mareš, David; Jeřábek, Vítězslav; Prajzler, Václav

    2015-01-01

    We report about a design of a bi-directional planar optical multiplex/demultiplex filter (triplexer) for the optical part of planar hybrid WDM bi-directional transceiver in fiber-to-the-home (FTTH) PON applications. The triplex lightwave circuit is based on the Epoxy Novolak Resin SU-8 waveguides on the silica-on-silicon substrate with Polymethylmethacrylate cladding layer. The triplexer is comprised of a linear butterfly concept of multimode interference (MMI) coupler separating downstream optical signals of 1490 nm and 1550 nm. For the upstream channel of 1310 nm, an additional directional coupler (DC) is used to add optical signal of 1310 nm propagating in opposite direction. The optical triplexer was designed and optimized using beam propagation method. The insertion losses, crosstalk attenuation, and extinction ratio for all three inputs/outputs were investigated. The intended triplexer was designed using the parameters of the separated DC and MMI filter to approximate the idealized direct connection of both devices.

  20. All fiber nonlinear microscopy at 1550 nm using a double-clad fiber coupler

    Science.gov (United States)

    Perrillat-Bottonet, Thomas; Strupler, Mathias; Leduc, Mikael; Majeau, Lucas; Godbout, Nicolas; Boudoux, Caroline

    2017-02-01

    Nonlinear microscopy has already shown its impact in biological research, namely in the fields of neurobiology, immunology, cancer research and embryology. Typically, these microscopes operate under free space propagation, using a dichroic mirror to separate the nonlinear signals from the excitation laser. While powerful such implementations are difficult to translate from the laboratory to a clinical setting where the environment is less controlled. Therefore, we propose an alignment-free all-fiber nonlinear microscopy system at 1550 nm based on double-clad fibers (DCF). As sectioning is performed through nonlinear effects, nonlinear microscopy does not require a detection pinhole, and. the DCF inner cladding can be used for efficient collection of nonlinear signals. The built system allows for multiplexing second harmonic generation (SHG) and two-photon excitation fluorescence (2PEF), collected from the inner cladding; and reflectance confocal microscopy (RCM), detected from the core acting as the confocal pinhole. Finally, an asymmetric double-clad fiber coupler (DCFC) is used to address efficiently both DCF channels. This all-fiber system is more compact and less sensitive to alignment, but requires carefully managing the transmission of the femtosecond pulse in the fiber. This is addressed using dispersion compensation fiber, pulse compression and solitonic propagation. Additionally, with a source centered at 1550 nm, we benefit from reduced sample scattering thus increasing the depth of field in comparison with systems operating at 800 nm. Overall we believe that the developed system could be transferred in clinics to enable in-vivo and in-situ imaging of human patient.

  1. Design and optimization of mechanically down-doped terahertz fiber directional couplers

    DEFF Research Database (Denmark)

    Bao, Hualong; Nielsen, Kristian; Rasmussen, Henrik K.;

    2014-01-01

    We present a thorough practical design optimization of broadband low loss, terahertz (THz) photonic crystal fiber directional couplers in which the two cores are mechanically down-doped with a triangular array of air holes. A figure of merit taking both the 3-dB bandwidth and loss of the coupler...... into account, is used for optimization of the structure parameters, given by the diameter and pitch of the cladding (d and Λ) and of the core (dc and Λc) air-hole structure. The coupler with Λ = 498.7 μm, dc= 324.2 μm, Λc = 74.8 μm, and dc = 32.5 μm is found to have the best performance at a center frequency...... of 1THz, with a bandwidth of 0.25 THz and a total device loss of 9.2 dB. The robustness of the optimum coupler to structural changes is investigated. © 2014 Optical Society of America....

  2. Performance improvement to silicon-on-insulator waveguide directional-coupler based devices

    Science.gov (United States)

    Sun, DeGui; Hasan, Imad; Abdul-Majid, Sawsan; Vandusen, Rob; Zheng, Qi; Hussien, Ali; Wang, Chunxia; Hu, Zhongming; Tarr, T. Garry; Hall, Trevor J.

    2010-10-01

    For the SOI-waveguide directional coupler (WDC), optical access loss (OAL) and polarization dependence (PD) are two critical performance specifications which seriously affect the adoptability and deployment of a device, including optical on-chip loss (OCL), polarization dependent loss (PDL) and extinction ratio of a 3dB-coupler based device. In this work, using a commercial software tool - FIMMPROP, the performance of an SOI-WDC is simulated. Simulations find that the curved waveguides for the turning sections of a 3dB WDC not only enlarge the footprint size, but also seriously deteriorate the device performance. For instance, the two curved waveguide sections of a WDC induce an unpredictably large change in the 3dB-coupling length, increase an OAL of 0.4-0.9dB, and seriously deteriorate the PD, and these performance changes radically depend on rib size. After a corner-turning mirror (CTM) structure is introduced to a 3dB SOI-WDC, the experiments show both the footprint length and 3dB-coupling length are unchanged, the OAL of the 3dB coupler is only 0.5dB which is close to the simulation value. Therefore, for a 3dB-coupler based Mach-Zehnder interference (MZI) structure, the OCL will be controlled to be <1.0dB in device design and will not depend on rib size.

  3. Arbitrary-ratio power splitter based on nonlinear multimode interference coupler

    Science.gov (United States)

    Tajaldini, Mehdi; Jafri, Mohd Zubir Mat

    2015-04-01

    We propose an ultra-compact multimode interference (MMI) power splitter based on nonlinear effects from simulations using nonlinear modal propagation analysis (NMPA) cooperation with finite difference Method (FDM) to access free choice of splitting ratio. Conventional multimode interference power splitter could only obtain a few discrete ratios. The power splitting ratio may be adjusted continuously while the input set power is varying by a tunable laser. In fact, using an ultra- compact MMI with a simple structure that is launched by a tunable nonlinear input fulfills the problem of arbitrary-ratio in integrated photonics circuits. Silicon on insulator (SOI) is used as the offered material due to the high contrast refractive index and Centro symmetric properties. The high-resolution images at the end of the multimode waveguide in the simulated power splitter have a high power balance, whereas access to a free choice of splitting ratio is not possible under the linear regime in the proposed length range except changes in the dimension for any ratio. The compact dimensions and ideal performance of the device are established according to optimized parameters. The proposed regime can be extended to the design of M×N arbitrary power splitters ratio for programmable logic devices in all optical digital signal processing. The results of this study indicate that nonlinear modal propagation analysis solves the miniaturization problem for all-optical devices based on MMI couplers to achieve multiple functions in a compact planar integrated circuit and also overcomes the limitations of previously proposed methods for nonlinear MMI

  4. Arbitrary-ratio power splitter based on nonlinear multimode interference coupler

    Energy Technology Data Exchange (ETDEWEB)

    Tajaldini, Mehdi [School of Physics, Universiti Sains Malaysia, 11800 Pulau Pinang (Malaysia); Young Researchers and Elite Club, Baft Branch, Islamic Azad University, Baft (Iran, Islamic Republic of); Jafri, Mohd Zubir Mat [School of Physics, Universiti Sains Malaysia, 11800 Pulau Pinang (Malaysia)

    2015-04-24

    We propose an ultra-compact multimode interference (MMI) power splitter based on nonlinear effects from simulations using nonlinear modal propagation analysis (NMPA) cooperation with finite difference Method (FDM) to access free choice of splitting ratio. Conventional multimode interference power splitter could only obtain a few discrete ratios. The power splitting ratio may be adjusted continuously while the input set power is varying by a tunable laser. In fact, using an ultra- compact MMI with a simple structure that is launched by a tunable nonlinear input fulfills the problem of arbitrary-ratio in integrated photonics circuits. Silicon on insulator (SOI) is used as the offered material due to the high contrast refractive index and Centro symmetric properties. The high-resolution images at the end of the multimode waveguide in the simulated power splitter have a high power balance, whereas access to a free choice of splitting ratio is not possible under the linear regime in the proposed length range except changes in the dimension for any ratio. The compact dimensions and ideal performance of the device are established according to optimized parameters. The proposed regime can be extended to the design of M×N arbitrary power splitters ratio for programmable logic devices in all optical digital signal processing. The results of this study indicate that nonlinear modal propagation analysis solves the miniaturization problem for all-optical devices based on MMI couplers to achieve multiple functions in a compact planar integrated circuit and also overcomes the limitations of previously proposed methods for nonlinear MMI.

  5. Proposal of all-optical sensor based on nonlinear MMI coupler for multi-purpose usage

    Science.gov (United States)

    Tajaldini, M.; MatJafri, M. Z.

    2015-10-01

    In this study, we propose an all-optical sensor based on consideration the nonlinear effects on modal propagation and output intensity based on ultra-compact nonlinear multimode interference (NLMMI) coupler. The sensor can be tuned to highest sensitivity in the wavelength and refractive index ranges sufficient to detect water- soluble chemical, air pollutions, and heart operation. The results indicate high output sensitivity to input wavelength. This sensitivity guides us to propose a wave sensor both transverse and longitudinal waves such as acoustic and light wave, when an external wave interacts with input waveguide. For instance, this sensor can be implemented by long input that inserted in the land, then any wave could detected from earth. The visible changes of intensity at output facet in various surrounding layer refractive index show the high sensitivity to the refractive index of surrounding layer that is foundation of introducing a sensor. Also, the results show the high distinguished changes on modal expansion and output throat distribution in various refractive indices of surrounding layer.

  6. DESIGN AND FABRICATION OF 12 GHZ MICROSTRIP DIRECTIONAL COUPLER FOR RF/MICROWAVE APPLICATION

    Directory of Open Access Journals (Sweden)

    AZAHAR FAUZI

    2016-03-01

    Full Text Available Microstrip coupled line is parallel coupled transmission lines formed by coupling two conducting strips (resonator with the same width together at a certain distance. This paper presents the design of microstrip directional coupler without the prior knowledge of the physical geometry. A general configuration directional coupler will be determined by creating a layout in the Agilent Advanced Design System (ADS and momentum. In order to perform simulation, a substrate as well as metallization and mesh should be defined. Hence, the required s-parameter response of the coupler could be obtained. The design will then fabricate on top of RT Duroid 6010 substrate, and finally undergo measuring through Vector Network Analyzer (VNA to evaluate their S-parameter characteristics. Simulated results show insertion loss, isolation, coupling (10.82 dB, and return loss were within the acceptable limits. Directivity of better than 23 dB was achieved in the simulated response. The coupling (9.99 dB of fabricated circuit shows a good agreement with the required specification (10 dB, but the directivity 10.61 dB is quite low in practice. The reason for the discrepancy could, however, due to discontinuities, measuring errors, and fabrication error. However, coupling values show a good agreement between the simulation and measured results.

  7. A Ratiometric Wavelength Measurement Based on a Silicon-on-Insulator Directional Coupler Integrated Device

    Directory of Open Access Journals (Sweden)

    Pengfei Wang

    2015-08-01

    Full Text Available A ratiometric wavelength measurement based on a Silicon-on-Insulator (SOI integrated device is proposed and designed, which consists of directional couplers acting as two edge filters with opposite spectral responses. The optimal separation distance between two parallel silicon waveguides and the interaction length of the directional coupler are designed to meet the desired spectral response by using local supermodes. The wavelength discrimination ability of the designed ratiometric structure is demonstrated by a beam propagation method numerically and then is verified experimentally. The experimental results have shown a general agreement with the theoretical models. The ratiometric wavelength system demonstrates a resolution of better than 50 pm at a wavelength around 1550 nm with ease of assembly and calibration.

  8. Fiber-chip grating coupler based on interleaved trenches with directionality exceeding 95.

    Science.gov (United States)

    Alonso-Ramos, C; Cheben, P; Ortega-Moñux, A; Schmid, J H; Xu, D-X; Molina-Fernández, I

    2014-09-15

    We propose a fiber-chip grating coupler that interleaves the standard full and shallow etch trenches in a 220 nm thick silicon layer to provide a directionality upward exceeding 95%. By adjusting the separation between the two sets of trenches, constructive interference is achieved in the upward direction independent of the bottom oxide thickness and without any bottom reflectors, overlays, or customized etch depths. We implement a transverse subwavelength structure in the first two grating periods to minimize back-reflections. The grating coupler has a calculated coupling efficiency of CE~-1.05 dB with a 1 dB bandwidth of 30 nm and minimum feature size of 100 nm, compatible with deep-UV lithography.

  9. New design of a triplexer using ring resonator integrated with directional coupler based on photonic crystals

    Science.gov (United States)

    Wu, Yaw-Dong; Shih, Tien-Tsorng; Lee, Jian-Jang

    2009-11-01

    In this paper, we proposed the design of directional coupler integrated with ring resonator based on two-dimensional photonic crystals (2D PCs) to develop a triplexer filter. It can be widely used as the fiber access network element for multiplexer-demultiplexer wavelength selective in fiber-to-the-home (FTTH) communication systems. The directional coupler is chosen to separate the wavelengths of 1490nm and 1310nm. The ring resonator separates the wavelength of 1550nm. The transmission efficiency is larger than 90%. Besides, the total size of propose triplexer is only 19μm×12μm. We present simulation results using the finite-difference time-domain (FDTD) method for the proposed structure.

  10. Enhanced resolution of a POF-based refractometer using a novel hybrid silica-fiber POF directional coupler

    Science.gov (United States)

    Farrell, Gerald; Gao, Cheng

    2008-04-01

    For a plastic optical fiber based refractometer system the influence of the directivity of the fiber coupler on the achievable resolution is analysed. It is also shown that provided the fiber length between the sensing tip and receiver is less that 2 m that interference due to Rayleigh backscatter will not comprise operation of the refractometer. A novel coupler based on a hybrid silica fiber-plastic fiber design is used experimentally to provide a comparison to the modelled results. It is shown that the high directivity (>35 dB) of this coupler can significantly enhance the resolution of the refractometer.

  11. Directional multimode coupler for planar magnonics: Side-coupled magnetic stripes

    Energy Technology Data Exchange (ETDEWEB)

    Sadovnikov, A. V., E-mail: sadovnikovav@gmail.com; Nikitov, S. A. [Laboratory “Metamaterials,” Saratov State University, Saratov 410012 (Russian Federation); Kotel' nikov Institute of Radioengineering and Electronics, Russian Academy of Sciences, Moscow 125009 (Russian Federation); Beginin, E. N.; Sheshukova, S. E.; Romanenko, D. V.; Sharaevskii, Yu. P. [Laboratory “Metamaterials,” Saratov State University, Saratov 410012 (Russian Federation)

    2015-11-16

    We experimentally demonstrate spin waves coupling in two laterally adjacent magnetic stripes. By the means of Brillouin light scattering spectroscopy, we show that the coupling efficiency depends both on the magnonic waveguides' geometry and the characteristics of spin-wave modes. In particular, the lateral confinement of coupled yttrium-iron-garnet stripes enables the possibility of control over the spin-wave propagation characteristics. Numerical simulations (in time domain and frequency domain) reveal the nature of intermodal coupling between two magnonic stripes. The proposed topology of multimode magnonic coupler can be utilized as a building block for fabrication of integrated parallel functional and logic devices such as the frequency selective directional coupler or tunable splitter, enabling a number of potential applications for planar magnonics.

  12. Broadband directional couplers fabricated in bulk glass with high repetition rate femtosecond laser pulses.

    Science.gov (United States)

    Chen, Wei-Jen; Eaton, Shane M; Zhang, Haibin; Herman, Peter R

    2008-07-21

    A femtosecond fiber laser was applied to fabricate broadband directional couplers inside bulk glass for general power splitting application in the 1250 to 1650-nm wavelength telecom spectrum. The broadband response was optimized over the 400-nm bandwidth by tailoring the coupling strength and the waveguide interaction length to balance the differing wavelength dependence of the straight interaction and bent transition regions. High spatial finesse of the femtosecond-laser writing technique enabled close placement (approxiamtely 6 microm) of adjacent waveguides that underpinned the wavelength-flattened broadband response at any coupling ratio in the 0% to 100% range. The spectral responses were well-represented by coupled mode theory, permitting simple design and implementation of broadband couplers for bulk 3D optical circuit integration.

  13. Design of a compact polarization beam splitter based on a deformed photonic crystal directional coupler

    Institute of Scientific and Technical Information of China (English)

    Ren Cang; Zheng Wan-Hua; Wang Ke; Du Xiao-Yu; Xing Ming-Xin; Chen Liang-Hui

    2008-01-01

    In this paper a compact polarization beam splitter based on a deformed photonic crystal directional coupler is designed and simulated. The transverse-electric (TE) guided mode and transverse-magnetic (TM) guided mode are split due to different guiding mechanisms. The effect of the shape deformation of the air holes on the coupler is studied. It discovered that the coupling strength of the coupled wavegnides is strongly enhanced by introducing elliptical airholes, which reduce the device length to less than 18.5μm. A finite-difference time-domain simulation is performed to evaluate the performance of the device, and the extinction ratios for both TE and TM polarized light are higher than 20 dB.

  14. Direct synthesis of strong grating couplers for efficient integrated optical beam forming

    CERN Document Server

    Urošević, Stevan

    2014-01-01

    We describe a computational method for the direct synthesis of non-uniform optical grating coupler geometries on a photonic chip to form beams of arbitrary field distribution. The method is applied to grating couplers using high index contrast, typically encountered in silicon photonics for fiber-to-chip coupling and chip-based optical beam forming. We use a numerical synthesis approach to synthesize a non-uniform structure that emits a particular desired beam pattern, and explicitly take into account chirp generated by non-uniform gratings. Even for strong, short gratings, and for designs within the constraints of existing standard 45nm SOI-CMOS foundry process, mode overlaps exceeding 90% can be obtained. We discuss strengths and shortcomings of the approach and particular implementation. We demonstrate the method by synthesizing non-uniform grating coupler designs for efficient mode matching to optical fiber modes or single free-space beam modes with Gaussian magnitude and flat phase front and show that go...

  15. Waveguide-Type Directional Coupler Based on Substrate Integrated Waveguide (SIW

    Directory of Open Access Journals (Sweden)

    Zohreh Pourgholamhossein

    2012-04-01

    Full Text Available Substrate Integrated Waveguide (SIW is a new type of guided wave structure which could be implemented in both microwave and millimeter wave integrated circuits. In this paper a novel waveguide type directional coupler based on substrate integrated waveguide consisting a double layer dielectric substrate is proposed. The design process is carried out using coupling theory and Chebyshev method. The proposed structure is fully based on SIW structure except at the input-output ports which are microstrip lines. The SIW bends are optimized for the lowest insertion loss using HFSS software. The center frequency of designed 20dB coupler is at 10GHz with 6GHz bandwidth. Based on the simulations the coupling remains almost constant over the coupler bandwidth with less than 2 dB variations. Larger bandwidth can be achieved by increasing the number of apertures. Also if we used a second set of apertures opposite side wall, the coupling would be increased by 6 dB.

  16. Nonlinear Coherent Directional Coupler: Coupled Mode Theory and BPM Simulation

    National Research Council Canada - National Science Library

    Kumbhakar, Dharmadas

    2012-01-01

    .... The coupling lengths derived from this simulation are compared with coupled mode theories. BPM results for the critical power follow the trend of the coupled mode theories, but it lies in between two coupled mode theories...

  17. Very high coupling of TM polarised light in photonic crystal directional couplers

    DEFF Research Database (Denmark)

    Borel, Peter Ingo; Thorhauge, Morten; Frandsen, Lars Hagedorn;

    2003-01-01

    noteworthy is the transmission level, experimentally found to be above -3 dB in the wavelength range 1520-1690 nm, for TM polarised light in the coupled channel. It is noted that even though band calculations show that the propagation of the TM polarisation takes place below the TM valence band, very high......The experimental and simulated spectra for TE and TM polarised light for the transmission through photonic crystal directional couplers are presented. The 3D FDTD simulations successfully explain all the major features of the experimental spectra as well as the actual transmission level. Especially...

  18. Improved performance of traveling wave directional coupler modulator based on electro-optic polymer

    CERN Document Server

    Zhang, Xingyu; Lin, Che-yun; Wang, Alan X; Hosseini, Amir; Lin, Xiaohui; Chen, Ray T

    2014-01-01

    Polymer based electro-optic modulators have shown great potentials in high frequency analog optical links. Existing commercial LiNibO3 Mach-Zehnder modulators have intrinsic drawbacks in linearity to provide high fidelity communication. In this paper, we present the design, fabrication and characterization of a traveling wave directional coupler modulator based on electro-optic polymer, which is able to provide high linearity, high speed, and low optical insertion loss. A silver ground electrode is used to reduce waveguide sidewall roughness due to the scattering of UV light in photolithography process in addition to suppressing the RF loss. A 1-to-2 multi-mode interference 3dB-splitter, a photobleached refractive index taper and a quasi-vertical taper are used to reduce the optical insertion loss of the device. The symmetric waveguide structure of the MMI-fed directional coupler is intrinsically bias-free, and the modulation is obtained at the 3-dB point regardless of the ambient temperature. By achieving lo...

  19. Semi-Analytical Simulation of Titanium-Indiffused Lithium Niobate-Integrated Optic Directional Couplers Consisting of Curved Waveguides

    Science.gov (United States)

    Ganguly, Pranabendu; Biswas, Juran Chandra; Lahiri, Samir Kumar

    Integrated optic directional couplers consisting of curved waveguides are simulated analytically by solving the Riccati equation. The coupling coefficient between the curved waveguides with a parabolically varying gap and the condition of total power transfer between the waveguides are derived. In order to compute the overall coupling coefficient and hence the power distribution along the waveguides for Ti:LiNbO3 curved waveguide directional couplers, the coupling coefficient for straight waveguide couplers is computed for different gaps using the effective-index-based matrix method (EIMM). Finally, the power distribution in the curved waveguides along the length is computed. The method is mostly analytical except the effective-index method and is computationally simple.

  20. Characteristic calculation of directional coupler for accelerator high-power feeders

    CERN Document Server

    Egorov, M A; Kaminsky, V I; Sobenin, N P; Zavadtsev, A A

    2001-01-01

    The calculation results of directional couplers with connection via the waveguide common narrow wall a coupling factor of 3.0 decibels,directivity no less than 20 decibels,adjustment of coupling factor at +- 1 decibels are presented. The adjustment is carried out with the help of cylindrical plungers, moving inside of waveguides on the part of broad walls in the location of the connection slot,and prismatic plungers,moving in rectangular waveguides connected to narrow walls opposite to a slot of connection. The device as a magic tee with movable throttle pistons in E- and H-plane arms permitting to match any load is designed too. The calculations are executed for devices operating at frequencies of 2.797 and 1.3 GHz.

  1. Magnetotransport in a dual waveguide coupled by a finite barrier: Energy filter and directional coupler

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    We propose in this paper that a dual waveguide coupled by a finite barrier be able to serve as an energy filter under a perpendicular magnetic field. In the waveguide direction, the conductance exhibits a periodic square-wave pattern in which the miniband is controlled by the magnetic and potential modulation. The electrons with energies in the miniband can completely transfer along one waveguide while the other electrons undergo filtration. Compared with the coupled waveguide without magnetic modulation, the structure under magnetic field is found to be a good directional coupler. By adjusting the potential barrier and magnetic field, the electrons input from one port of waveguide can transfer to any other ports.

  2. Polarization splitter based on a three waveguide directional coupler using quantum mechanical analogies

    Science.gov (United States)

    Aashna, Pragati; Thyagarajan, K.

    2017-06-01

    We propose a novel waveguide polarization splitter based on the optical analogue of two-photon Rabi oscillations and stimulated Raman adiabatic passage in a three waveguide directional coupler. Both these processes are borrowed from three level quantum mechanical atomic systems, in which an intermediate level is used to transfer the population from one state to another without any population occupation in the intermediate level. To show the practical feasibility of the device, simulations have been carried out on waveguides in lithium niobate and we show that two orthogonal polarizations can be separated at the output using the proposed three waveguide structures. We also show that the proposed structure is robust against changes in phase mismatch parameters, as well as wavelength of operation.

  3. Optical solitons in PT-symmetric nonlinear couplers with gain and loss

    Science.gov (United States)

    Alexeeva, N. V.; Barashenkov, I. V.; Sukhorukov, Andrey A.; Kivshar, Yuri S.

    2012-06-01

    We study spatial and temporal solitons in the PT symmetric coupler with gain in one waveguide and loss in the other. Stability properties of the high- and low-frequency solitons are found to be completely determined by a single combination of the soliton's amplitude and the gain-loss coefficient of the waveguides. The unstable perturbations of the high-frequency soliton break the symmetry between its active and lossy components which results in a blowup of the soliton or a formation of a long-lived breather state. The unstable perturbations of the low-frequency soliton separate its two components in space, thereby blocking the power drainage of the active component and cutting the power supply to the lossy one. Eventually this also leads to the blowup or breathing.

  4. Optical solitons in $\\mathcal{PT}$-symmetric nonlinear couplers with gain and loss

    CERN Document Server

    Alexeeva, N V; Sukhorukov, Andrey A; Kivshar, Yuri S

    2012-01-01

    We study spatial and temporal solitons in the $\\mathcal{PT}$ symmetric coupler with gain in one waveguide and loss in the other. Stability properties of the high- and low-frequency solitons are found to be completely determined by a single combination of the soliton's amplitude and the gain/loss coefficient of the waveguides. The unstable perturbations of the high-frequency soliton break the symmetry between its active and lossy components which results in a blowup of the soliton or a formation of a long-lived breather state. The unstable perturbations of the low-frequency soliton separate its two components in space blocking the power drainage of the active component and cutting the power supply to the lossy one. Eventually this also leads to the blowup or breathing.

  5. Optical directional coupler and Mach-Zehnder interferometer enhanced via 4H-SiC phonons

    Science.gov (United States)

    Finch, Michael F.; Saunders Filho, Claudio A. B.; Lail, Brian A.

    2016-09-01

    Surface phonon polaritons (SPhPs), similar to it cousin phenomenon surface plasmon polaitons (SPPs), are quasi-neutral particles resulting from light-matter coupling that can provide high modal confinement and long propagation in the mid to long infrared (IR). Mach-Zehnder interferometer (MZI) is a combination of two connected optical directional couplers (ODC). With the use of SPhPs, sub-wavelength feature sizes and modal areas can be achieved and to this end a hybrid SPhP waveguide, where propagation length and modal area can be trade-off, will be employed in the design of an ODC and MZI. This endeavor analyzes and characteristics both an ODC and MZI using commercially available numerical simulation software employing finite element method (FEM). The ODC and MZI are design using a novel SPhP hybrid waveguide design where a 4H-SiC substrate provides the polariton mode. The output ports power and relative phase difference between ports are investigated. SPhP enhanced ODC and MZI has applications including, but not limited to, next-generation ultra-compact photonic integrated circuits and waveguide based IR sensing.

  6. Femtosecond laser inscription of asymmetric directional couplers for in-fiber optical taps and fiber cladding photonics.

    Science.gov (United States)

    Grenier, Jason R; Fernandes, Luís A; Herman, Peter R

    2015-06-29

    Precise alignment of femtosecond laser tracks in standard single mode optical fiber is shown to enable controllable optical tapping of the fiber core waveguide light with fiber cladding photonic circuits. Asymmetric directional couplers are presented with tunable coupling ratios up to 62% and bandwidths up to 300 nm at telecommunication wavelengths. Real-time fiber monitoring during laser writing permitted a means of controlling the coupler length to compensate for micron-scale alignment errors and to facilitate tailored design of coupling ratio, spectral bandwidth and polarization properties. Laser induced waveguide birefringence was harnessed for polarization dependent coupling that led to the formation of in-fiber polarization-selective taps with 32 dB extinction ratio. This technology enables the interconnection of light propagating in pre-existing waveguides with laser-formed devices, thereby opening a new practical direction for the three-dimensional integration of optical devices in the cladding of optical fibers and planar lightwave circuits.

  7. Thermo-optic control of dielectric-loaded plasmonic Mach-Zehnder interferometers and directional coupler switches

    DEFF Research Database (Denmark)

    Gosciniak, J.; Markey, L.; Dereux, A.

    2012-01-01

    We report detailed experimental studies of compact fiber-coupled dielectric-loaded plasmonic waveguide components-Mach-Zehnder interferometers (MZIs) and directional couplers (DCs)-whose operation at telecom wavelengths is controlled via the thermo-optic effect by electrically heating the gold st......, and wavelength dependent low power (similar to 0.92 mW) rerouting is achieved with DC switches. Furthermore, simulations were performed to confirm the switching characteristics of the components....

  8. A new demodulation technique for optical fiber interferometric sensors with [3×3] directional couplers

    Institute of Scientific and Technical Information of China (English)

    Tingting Liu; Jie Cui; Desheng Chen; Ling Xiao; Dexing Sun

    2008-01-01

    2Optical fiber interferometric sensors based on [3 × 3] couplers have been used in many fields. A new technique is proposed to demodulate output signals of this kind of sensors. The technique recovers the signal of interest by fitting coefficients of elliptic (Lissajous) curves between each fiber pair. Different from other approaches, this technique eliminates the dependence on the idealization of [3 × 3] coupler, provides enhanced tolerance to the variance of photoelectric converters, and is anti-polarization in a certain extent. The main algorithm has been successfully demonstrated both by numerical simulation and experimental result.

  9. Influence of group-velocity mismatch on soliton switching in a nonlinear fibre coupler

    Institute of Scientific and Technical Information of China (English)

    李宏; 黄德修; 王东宁

    2003-01-01

    In this work, the influence of group-velocity mismatch on soliton self-routing pulse switching in a nonlinear fibrecoupler is discussed in detail by the use of both variational approach and numerical simulation. The results obtainedshow that the group-velocity mismatch leads to the relative displacement between the two orthogonal polarizationmodes, increase of the critical power, and reduction of the elimination-light ratio. For sub-ps pulse, the influence cannot be neglected.

  10. Modeling seawater salinity and temperature sensing based on directional coupler assembled by polyimide-coated micro/nanofibers.

    Science.gov (United States)

    Wang, Shanshan; Liao, Yipeng; Yang, Hongjuan; Wang, Xin; Wang, Jing

    2015-12-01

    The salinity and temperature of seawater are important parameters in oceanography. Based on the directional coupler assembled by polyimide-coated micro/nanofibers, optical sensors with high sensitivity for simultaneous salinity and temperature sensing in seawater are proposed. Dependences of sensitivities on wavelength, salinity, and temperature are investigated theoretically, with which performances of such sensor under general sea conditions can be evaluated. Results show that salinity and temperature sensitivities can reach levels of nm/‰ and nm/°C, which are much higher than those of fiber Bragg gratings, knot resonators, and photonic crystal fibers. Other considerations for system design such as the length of the coupling area, the diameter difference between two fibers, and the thickness of polyimide coatings are also discussed. Sensors proposed here suggest a simple approach to realize high-sensitivity micro/nanofiber optical sensing of salinity and temperature in seawater simultaneously and may find applications in developing miniature sensors used in seawater.

  11. Improved silica-PLC Mach-Zehnder interferometer type optical switches with error dependence compensation of directional coupler

    Science.gov (United States)

    Wang, Jun; Yi, Jia; Guo, Lijun; Liu, Peng; Hall, Trevor J.; Sun, DeGui

    2017-03-01

    For the most popular structure of planer lightwave circuit (PLC) 2×2 thermo-optic switches, Mach-Zehnder interferometer (MZI), a full range of splitting ratio errors of directional coupler (DC) are investigated. All the parameters determining the splitting ratio are the dimensions and the refractive indices of the waveguide core and cladding layers. In this work, the coherent relationships between the waveguide size and the refractive indices are analyzed and then the error compensation between the width and the refractive index of waveguide core, and the controllable effect of over clad layer refractive index error upon the MZI-type optical switch are all discovered with numerical calculation and BPM simulations. Then, an MZI-type 2×2 thermo-optic switch having a higher error tolerance is established with the efficient optimizations of all the 3 dB-DC parameters. As a result, for the symmetric MZI switch, an insertion loss of 1.5 dB and optical extinction ratio of over 20 dB are realized for the average tolerance of±5.0%. An asymmetric arm optical phase and unequal arm lengths is also employed to improve the uniformities of insertion loss. The agreements between the designs and the experiments are recognized, leading to a wide adoption of practical silica-PLC optical switch products.

  12. Numerical investigation of polarization insensitive two-mode division (De)multiplexer based on an asymmetric directional coupler

    Science.gov (United States)

    Truong, Cao Dung; Trinh, M. Tuan; Dang, Hoai Bac; Nguyen, Van Tho

    2017-02-01

    We propose a polarization insensitive two-mode division (de)multiplexer based on a silicon-on-insulator platform operating with a broadband, low insertion and scattering loss, and small crosstalk. By using an asymmetric directional coupler, two-mode (de)multiplexing functions for both polarization TE and TM states can be realized by the numerical simulation. Simulated results using a three dimensional beam propagation method (3D-BPM) incorporated with an effective index method (EIM) show high performance of the device with an operation efficiency above 81.2% (i.e., insertion loss is less than 0.9 dB) in the range of ±5 nm around the central wavelength of 1550 nm. Fabrication tolerances also have proved suitability to current manufacture technologies for the planar waveguides. Besides a low scattering loss of the sidewall roughness and a little influence of dispersion, a small footprint can bring the device to applications of high bitrate and compact on-chip silicon photonic integrated circuits.

  13. Analysis on vertical directional couplers with long range surface plasmons for multilayer optical routing

    Energy Technology Data Exchange (ETDEWEB)

    Alam, B., E-mail: badrul.alam@uniroma1.it; Veroli, A.; Benedetti, A. [Department of Information Engineering, Electronics and Telecommunications (DIET), University of Rome “La Sapienza,” Rome (Italy)

    2016-08-28

    A structure featuring vertical directional coupling of long-range surface plasmon polaritons between strip waveguides at λ = 1.55 μm is investigated with the aim of producing efficient elements that enable optical multilayer routing for 3D photonics. We have introduced a practical computational method to calculate the interaction on the bent part. This method allows us both to assess the importance of the interaction in the bent part and to control it by a suitable choice of the fabrication parameters that helps also to restrain effects due to fabrication issues. The scheme adopted here allows to reduce the insertion losses compared with other planar and multilayer devices.

  14. Crosstalk comparison of lattice-form optical interleaver with different coupler structures

    Science.gov (United States)

    Wan, Zhujun; Luo, Fengguang; Luo, Zhixiang

    2009-05-01

    Lattice circuit made from a cascade of couplers and delay-lines is a popular approach for optical interleaver based on planar lightwave circuit (PLC) technology. Different coupler structures can be employed in the lattice circuit, including 1-stage directional couplers (DCs), 4-stage DCs, and 2-stage multimode interference (MMI) couplers. We fabricated optical interleavers with above three coupler structures, respectively. The experimental results prove that the latter two coupler structures can help to reduce crosstalk, which meets the simulation results well.

  15. Numerical analysis on using compound parabolic couplers for direct transmission of concentrated solar radiation via optical fibre (Conference Presentation)

    Science.gov (United States)

    Rahou, Maryam; Andrews, John; Rosengarten, Gary

    2016-09-01

    A challenge in high-temperature solar thermal applications is transfer of concentrated solar radiation to the load with minimum energy loss. The use of a solar concentrator in conjunction with optical fibres has potential advantages in terms of transmission efficiency, technical feasibility and cost-effectiveness compared to a conventional heat transfer system employing heat exchangers and a heat transfer fluid. For transferring higher levels of concentrated flux it is necessary to employ multiple optical fibres or fibre bundles. However, the losses at the incident plane of a bundle due to absorption by the epoxy and cladding between the individual fibres in a bundle are substantial, typically over 60% of the overall transmission loss. The optical transmission of the system can thus be enhanced by employing a coupler between the concentrated solar radiation and the entrance to the bundle that reflects all incident light into the cores of individual fibres rather than allowing it to strike the interstitial spaces between the cores. This paper describes the design for such couplers based on multiple compound parabolic (CP) reflectors each with its exit aperture coinciding with the core of an individual fibre within the bundle. The proposed design employs external reflection from a machined metallic aluminium surface. This CP arrangement has the additional benefit of increasing the concentration ratio of the primary solar concentrator used. Simulation modeling using LightTools is conducted into a parabolic Cassegrain solar concentrator employing these CP couplers prior to a fibre bundle. The dependence of overall transmission and total optical efficiency of the system over lengths of the bundle up to 100 m are investigated quantitatively. In addition, the influence on transmission of the angular distribution of radiation intensity at the aperture of the couplers is studied.

  16. Nonlinear dynamics new directions models and applications

    CERN Document Server

    Ugalde, Edgardo

    2015-01-01

    This book, along with its companion volume, Nonlinear Dynamics New Directions: Theoretical Aspects, covers topics ranging from fractal analysis to very specific applications of the theory of dynamical systems to biology. This second volume contains mostly new applications of the theory of dynamical systems to both engineering and biology. The first volume is devoted to fundamental aspects and includes a number of important new contributions as well as some review articles that emphasize new development prospects. The topics addressed in the two volumes include a rigorous treatment of fluctuations in dynamical systems, topics in fractal analysis, studies of the transient dynamics in biological networks, synchronization in lasers, and control of chaotic systems, among others. This book also: ·         Develops applications of nonlinear dynamics on a diversity of topics such as patterns of synchrony in neuronal networks, laser synchronization, control of chaotic systems, and the study of transient dynam...

  17. 大功率微带定向耦合器的设计%Design of High Power Microstrip Directional Coupler

    Institute of Scientific and Technical Information of China (English)

    刘志红; 李兵

    2012-01-01

    介绍了一种S波段25 dB大功率微带定向耦合器的设计方法及测试结果.为了对大功率微波信号进行较为准确的检测,微带耦合器需具有抗大功率串扰强、带内平坦度好、插损小的性能.文中采用电感补偿平衡奇偶模相速技术,由二元概念和容性补偿奇偶模相速的理论,分析出电感补偿电路的设计参数,用Ansoft HFSS软件进行仿真与优化,实现了高性能大功率微带定向耦合器.微带电路加工在Rogers RT/duroid 6002基片上,分别用10 W和300 W固态发射机对其抗大功率串扰的性能进行了测试.经实测数据分析,所设计的耦合器在工作频带内,插损小于0.3 dB,带内波动低于1 dB,方向性大于9 dB.%An implementation scheme and test results of 25 dB high power microstrip directional coupler is proposed.In order to test high power microwave signal accurately,microstrip coupler should have strong anti-cross interfere capability、good hand flat-ness、low insertion loss.In this paper,compensation techniques of inductor are adopted to poise the odd mode and even mode.Design parameters are obtained by binary concept and capacitive compensation theory.The simulation and optimization are completed by soft using Ansoft HFSS.High performance and high power microstrip directional coupler is implemented.Microstrip circuit is made by substrate using Rogers RT/duroid 6002.Solid state transmitter of 10 W and 300 W are used to test anti-cross interfere capability.The results show that,within the operating frequency range,the insertion loss is less than 0.3 dB,and the ripple level of the coupling factor better than 1 dB,and the directivity more than 9 dB.

  18. Nonlinear dynamics new directions theoretical aspects

    CERN Document Server

    Ugalde, Edgardo

    2015-01-01

    This book, along with its companion volume, Nonlinear Dynamics New Directions: Models and Applications, covers topics ranging from fractal analysis to very specific applications of the theory of dynamical systems to biology. This first volume is devoted to fundamental aspects and includes a number of important new contributions as well as some review articles that emphasize new development prospects. The second volume contains mostly new applications of the theory of dynamical systems to both engineering and biology. The topics addressed in the two volumes include a rigorous treatment of fluctuations in dynamical systems, topics in fractal analysis, studies of the transient dynamics in biological networks, synchronization in lasers, and control of chaotic systems, among others. This book also: ·         Presents a rigorous treatment of fluctuations in dynamical systems and explores a range of topics in fractal analysis, among other fundamental topics ·         Features recent developments on...

  19. Single-mode fiber linearly tapered planar waveguide tunable coupler

    Science.gov (United States)

    Das, Alok K.; Hussain, Anwar

    1997-09-01

    We developed a simple system of tunable fiber film coupler using a linearly tapered thin-film planar waveguide (PWG) evanescently coupled by a single-mode distributed fiber half-coupler. We investigate the characteristics of the coupler theoretically and experimentally taking into consideration the refractive index ( n f ) of nonuniform films, the magnitude of nonuniformity ( m ) of the films, and the source wavelength ( ). The thickness variation of the nonuniform film is along the direction of propagation of optical power. Tapered and plano concave thin films of a mix of oils as well as a plano concave poly(methyl methacrylate) film were fabricated to serve as nonuniform PWG s. Similar to single-mode fiber with a uniform thickness PWG coupler, such a coupler also provides light modulation with a change of n f . However, position shifting of a half-coupler in a tapered PWG structure along the direction of propagation exhibits the variation of fiber throughput power. This action serves as a simple system for a tunable fiber film coupler. Wavelength-dependent throughput fiber power for such a coupler also behaves as a filter. The center wavelength can be controlled by shifting the position of the half-coupler. A coupling fiber as a half-coupler can be used for efficient coupling. We performed a theoretical analysis of the structure using Marcuse s model and observed good agreement with the experimental results.

  20. Structural Analysis of Taper-Threaded Rebar Couplers

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Seok Jae [Univ. of Ulsan, Ulsan (Korea, Republic of); Kwon, Hyuk Mo; Seo, Sang Hwan [Sammi Precision Co. Ltd., Ulsan (Korea, Republic of)

    2014-05-15

    A number of rebar couplers were developed by the leading companies. The information about the products is available from the company website. However, the theory on the taper-threaded coupler is not available. In this paper, the mechanics of the taper-thread was developed to understand the effect of the tightening torque. Structural analysis of our own newly developed rebar coupler was done to improve the strength of the coupler. The taper-threaded rebar coupler was analyzed. The tightening of the rebar into the coupler developed a circumferential stress in the coupler. The circumferential stress depends on the coefficient of friction as well as the tightening torque. The circumferential stress is less than the allowable stress 20 kgf/mm{sup 2} of the material for the coefficient of friction greater than 0.1. The tightening of the rebar into the coupler and the subsequent tensioning was simulated using CATIA. Linear elastic analysis considering contact was done. The tightening of the taper-threaded rebar developed a uniform stress distribution in both standard coupler and position coupler. On the other hand, the tightening of the nut in the axial direction developed a non-uniform stress distribution. Similarly the tensioning also developed a non-uniform stress distribution.

  1. Design of a SiO₂ top-cladding and compact polarization splitter-rotator based on a rib directional coupler.

    Science.gov (United States)

    Wang, Jing; Niu, Ben; Sheng, Zhen; Wu, Aimin; Wang, Xi; Zou, Shichang; Qi, Minghao; Gan, Fuwan

    2014-02-24

    A compact polarization splitter-rotator based on a silicon-on-insulator rib asymmetrical directional coupler with SiO2 top-cladding is proposed. Unlike previously reported PSRs which specifically required the top-cladding material to be different from the bottom cladding in order to break the symmetry of the waveguide cross-section, our proposed PSR has no such limitation on the top-cladding due to the horizontal asymmetry of the rib waveguide. In addition, the device is highly compact and has a total length as short as 24 μm. Numerical simulation shows that a high conversion efficiency of ~97% is obtained at the wavelength of 1550 nm. With the width variation of ± 15 nm and the gap variation of ± 50 nm, the PSR still has high ER of 12 dB at the cross-port, showing large fabrication tolerance. This device can be cascaded to improve the performance at the through port and an example of a two-stage PSR is presented. The mode conversion between the strip waveguide and the rib waveguide is also discussed.

  2. Optimal Design Based on Taguchi Method for Optical Directional Full Couplers of Sin-Square Function%田口稳健设计优化之绝热式光方向完全耦合器

    Institute of Scientific and Technical Information of China (English)

    陈奇夆; 古昀生; 颜嘉禾; 黄山福

    2008-01-01

    Optimal design based on Taguchi method for optical directional full couplers of sin-square func-tion is investigated. L9 experimental tests based on Taguchi method are performed, and beam propagation method is used to simulate design conditions. The objective of the work includes in the new design of opti-cal directional full couplers can obtain respectively low crosstalk and short couplers. In accordance with this simulation process, the working time of simulation and optimization experimentally can be greatly re-duced. For the sin-square function, we try and find the best sets of coupling waveguide structure parame-ters of adiabatic directional couplers with larger structure tolerance and shorter coupler length, the results can obtain 95% of the trust ranges. The optimal design conditions determined by Taguchi's method for re-ducing the low crosstalk and short couplers were verified experimentally in this work.%本研究利用田口实验优化法配合光束传播法设计优化光方向完全耦合器 sin-square 函数,能夠达到低串扰与短耦合器长度的目标,在田口实验优化法中我们选择直交表 L9 做为我们的实验平台.研究结果显示,使用 BPM 辅助设计方式配合田口方法可有效的减少设计优化光方向完全耦合器的实验数.在实验过程中我们尝试去找出并设定符合低串扰与短耦合器长度的绝热式光方向耦合器 sin-square 函数的结构参数范围,并且在田口实验优化法中的确认实验可以达到95%的信心指数.在这份研究中,我们证实利用田口实验优化法配合 BPM 辅助设计优化光方向完全耦合器 sin-square 函数是确实可行的.

  3. Nonlinear approximation with dictionaries I. Direct estimates

    DEFF Research Database (Denmark)

    Gribonval, Rémi; Nielsen, Morten

    2004-01-01

    with algorithmic constraints: thresholding and Chebychev approximation classes are studied, respectively. We consider embeddings of the Jackson type (direct estimates) of sparsity spaces into the mentioned approximation classes. General direct estimates are based on the geometry of the Banach space, and we prove...

  4. Nonlinear approximation with dictionaries, I: Direct estimates

    DEFF Research Database (Denmark)

    Gribonval, Rémi; Nielsen, Morten

    $-term approximation with algorithmic constraints: thresholding and Chebychev approximation classes are studied respectively. We consider embeddings of the Jackson type (direct estimates) of sparsity spaces into the mentioned approximation classes. General direct estimates are based on the geometry of the Banach space...

  5. Experimental Evidence of Directivity-Enhancing Mechanisms in Nonlinear Lattices

    CERN Document Server

    Ganesh, R

    2016-01-01

    In this letter, we experimentally investigate the directional characteristics of propagating, finite-amplitude wave packets in lattice materials, with an emphasis on the functionality enhancement due to the nonlinearly-generated higher harmonics. To this end, we subject a thin, periodically perforated sheet to out-of-plane harmonic excitations, and we design a systematic measurement and data processing routine that leverages the full-wavefield reconstruction capabilities of a laser vibrometer to precisely delineate the effects of nonlinearity. We demonstrate experimentally that the interplay of dispersion, nonlinearity, and modal complexity which is involved in the generation and propagation of higher harmonics gives rise to secondary wave packets with characteristics that conform to the dispersion relation of the corresponding linear structure. Furthermore, these nonlinearly generated wave features display modal and directional characteristics that are complementary to those exhibited by the fundamental harm...

  6. Nonlinear approximation with dictionaries I. Direct estimates

    DEFF Research Database (Denmark)

    Gribonval, Rémi; Nielsen, Morten

    2004-01-01

    We study various approximation classes associated with m-term approximation by elements from a (possibly) redundant dictionary in a Banach space. The standard approximation class associated with the best m-term approximation is compared to new classes defined by considering m-term approximation...... with algorithmic constraints: thresholding and Chebychev approximation classes are studied, respectively. We consider embeddings of the Jackson type (direct estimates) of sparsity spaces into the mentioned approximation classes. General direct estimates are based on the geometry of the Banach space, and we prove...

  7. Nonlinear approximation with dictionaries, I: Direct estimates

    DEFF Research Database (Denmark)

    Gribonval, Rémi; Nielsen, Morten

    We study various approximation classes associated with $m$-term approximation by elements from a (possibly redundant) dictionary in a Banach space. The standard approximation class associated with the best $m$-term approximation is compared to new classes defined by considering $m......$-term approximation with algorithmic constraints: thresholding and Chebychev approximation classes are studied respectively. We consider embeddings of the Jackson type (direct estimates) of sparsity spaces into the mentioned approximation classes. General direct estimates are based on the geometry of the Banach space...

  8. Impedance matching vertical optical waveguide couplers for dense high index contrast circuits.

    Science.gov (United States)

    Sun, Rong; Beals, Mark; Pomerene, Andrew; Cheng, Jing; Hong, Ching-Yin; Kimerling, Lionel; Michel, Jurgen

    2008-08-04

    We designed and demonstrated a compact, high-index contrast (HIC) vertical waveguide coupler for TE single mode operation with the lowest coupling loss of 0.20 dB +/- 0.05 dB at 1550 nm. Our vertical coupler consists of a pair of vertically overlapping inverse taper structures made of SOI and amorphous silicon. The vertical coupler can suppress power oscillation observed in regular directional couplers and guarantees vertical optical impedance matching with great tolerance for fabrication and refractive index variations of the waveguide materials. The coupler furthermore shows excellent broadband coupling efficiencies between 1460 nm and 1570 nm.

  9. A HIGH POWER RF COUPLER DESIGN FOR MUON COOLING RF CAVITIES.

    Energy Technology Data Exchange (ETDEWEB)

    CORLETT,J.; LI,DERUN; RIMMER,R.; HOLTKAMP,N.; MORETTI,A.; KIRK,H.G.

    1999-03-29

    We present a high power RF coupler design for an interleaved {pi}/2 805 MHz standing wave accelerating structure proposed for an muon cooling experiment at FNAL. The coupler, in its simplest form, is a rectangular waveguide directly connected to an accelerating Cell through an open slot on the cavity side-wall or end-plates. Two of such couplers are needed to feed the interleaved cavities. Current high power RF test requires the coupler to be at critical coupling. Numerical simulations on the coupler designs using MAFIA will be presented.

  10. Consensus in Directed Networks of Agents With Nonlinear Dynamics

    NARCIS (Netherlands)

    Yu, Wenwu; Chen, Guanrong; Cao, Ming; Qu, Z.

    2011-01-01

    This technical note studies the consensus problem for cooperative agents with nonlinear dynamics in a directed network. Both local and global consensus are defined and investigated. Techniques for studying the synchronization in such complex networks are exploited to establish various sufficient con

  11. Linear atomic quantum coupler

    CERN Document Server

    El-Orany, Faisal A A

    2009-01-01

    In this paper, we develop the notion of the linear atomic quantum coupler. This device consists of two modes propagating into two waveguides, each of them includes a localized and/or a trapped atom. These waveguides are placed close enough to allow exchanging energy between them via evanescent waves. Each mode interacts with the atom in the same waveguide in the standard way, i.e. as the Jaynes-Cummings model (JCM), and with the atom-mode in the second waveguide via evanescent wave. We present the Hamiltonian for the system and deduce the exact form for the wavefunction. We investigate the atomic inversions and the second-order correlation function. In contrast to the conventional linear coupler, the atomic quantum coupler is able to generate nonclassical effects. The atomic inversions can exhibit long revival-collapse phenomenon as well as subsidiary revivals based on the competition among the switching mechanisms in the system. Finally, under certain conditions, the system can yield the results of the two-m...

  12. Nonlinear Direct Robust Adaptive Control Using Lyapunov Method

    Directory of Open Access Journals (Sweden)

    Chunbo Xiu

    2013-07-01

    Full Text Available    The problem of robust adaptive stabilization of a class of multi-input nonlinear systems with arbitrary unknown parameters and unknown structure of bounded variation have been considered. By employing the direct adaptive and control Lyapunov function method, a robust adaptive controller is designed to complete the globally adaptive stability of the system states. By employing our result, a kind of nonlinear system is analyzed, the concrete form of the control law is given and the meaningful quadratic control Lyapunov function for the system is constructed. Simulation of parallel manipulator is provided to illustrate the effectiveness of the proposed method.

  13. NEW ALTERNATING DIRECTION FINITE ELEMENT SCHEME FOR NONLINEAR PARABOLIC EQUATION

    Institute of Scientific and Technical Information of China (English)

    崔霞

    2002-01-01

    A new alternating direction (AD) finite element (FE) scheme for 3-dimensional nonlinear parabolic equation and parabolic integro-differential equation is studied. By using AD,the 3-dimensional problem is reduced to a family of single space variable problems, calculation work is simplified; by using FE, high accuracy is kept; by using various techniques for priori estimate for differential equations such as inductive hypothesis reasoning, the difficulty arising from the nonlinearity is treated. For both FE and ADFE schemes, the convergence properties are rigorously demonstrated, the optimal H1- and L2-norm space estimates and the O((△t)2) estimate for time variable are obtained.

  14. Direct Perturbation Method for Derivative Nonlinear Schrodinger Equation

    Institute of Scientific and Technical Information of China (English)

    CHENG Xue-Ping; LIN Ji; HAN Ping

    2008-01-01

    We extend Lou's direct perturbation method for solving the nonlinear SchrSdinger equation to the case of the derivative nonlinear Schrodinger equation (DNLSE). By applying this method, different types of perturbation solutions axe obtained. Based on these approximate solutions, the analytical forms of soliton parameters, such as the velocity, the width and the initial position, are carried out and the effects of perturbation on solitons are analyzed at the same time. A numerical simulation of perturbed DNLSE finally verifies the results of the perturbation method.

  15. Nonlinear dynamics of direction-selective recurrent neural media.

    Science.gov (United States)

    Xie, Xiaohui; Giese, Martin A

    2002-05-01

    The direction selectivity of cortical neurons can be accounted for by asymmetric lateral connections. Such lateral connectivity leads to a network dynamics with characteristic properties that can be exploited for distinguishing in neurophysiological experiments this mechanism for direction selectivity from other possible mechanisms. We present a mathematical analysis for a class of direction-selective neural models with asymmetric lateral connections. Contrasting with earlier theoretical studies that have analyzed approximations of the network dynamics by neglecting nonlinearities using methods from linear systems theory, we study the network dynamics with nonlinearity taken into consideration. We show that asymmetrically coupled networks can stabilize stimulus-locked traveling pulse solutions that are appropriate for the modeling of the responses of direction-selective neurons. In addition, our analysis shows that outside a certain regime of stimulus speeds the stability of these solutions breaks down, giving rise to lurching activity waves with specific spatiotemporal periodicity. These solutions, and the bifurcation by which they arise, cannot be easily accounted for by classical models for direction selectivity.

  16. Pulsatile instability in rapid directional solidification - Strongly-nonlinear analysis

    Science.gov (United States)

    Merchant, G. J.; Braun, R. J.; Brattkus, K.; Davis, S. H.

    1992-01-01

    In the rapid directional solidification of a dilute binary alloy, analysis reveals that, in addition to the cellular mode of Mullins and Sekerka (1964), there is an oscillatory instability. For the model analyzed by Merchant and Davis (1990), the preferred wavenumber is zero; the mode is one of pulsation. Two strongly nonlinear analyses are performed that describe this pulsatile mode. In the first case, nonequilibrium effects that alter solute rejection at the interface are taken asymptotically small. A nonlinear oscillator equation governs the position of the solid-liquid interface at leading order, and amplitude and phase evolution equations are derived for the uniformly pulsating interface. The analysis provides a uniform description of both subcritical and supercritical bifurcation and the transition between the two. In the second case, nonequilibrium effects that alter solute rejection are taken asymptotically large, and a different nonlinear oscillator equation governs the location of the interface to leading order. A similar analysis allows for the derivation of an amplitude evolution equation for the uniformly pulsating interface. In this case, the bifurcation is always supercritical. The results are used to make predictions about the characteristics of solute bands that would be frozen into the solid.

  17. Omnidirectional spin-wave nanograting coupler.

    Science.gov (United States)

    Yu, Haiming; Duerr, G; Huber, R; Bahr, M; Schwarze, T; Brandl, F; Grundler, D

    2013-01-01

    Magnonics as an emerging nanotechnology offers functionalities beyond current semiconductor technology. Spin waves used in cellular nonlinear networks are expected to speed up technologically, demanding tasks such as image processing and speech recognition at low power consumption. However, efficient coupling to microelectronics poses a vital challenge. Previously developed techniques for spin-wave excitation (for example, by using parametric pumping in a cavity) may not allow for the relevant downscaling or provide only individual point-like sources. Here we demonstrate that a grating coupler of periodically nanostructured magnets provokes multidirectional emission of short-wavelength spin waves with giantly enhanced amplitude compared with a bare microwave antenna. Exploring the dependence on ferromagnetic materials, lattice constants and the applied magnetic field, we find the magnonic grating coupler to be more versatile compared with gratings in photonics and plasmonics. Our results allow one to convert, in particular, straight microwave antennas into omnidirectional emitters for short-wavelength spin waves, which are key to cellular nonlinear networks and integrated magnonics.

  18. Power coupler kick of the TRIUMF ICM capture cavities

    Science.gov (United States)

    Yan, Fang; E. Laxdal, R.; Zvyagintsev, V.; Yu., Chao; C., Gong; Koscielniak, S.

    2011-06-01

    The TRIUMF Injector CryoModule (ICM) adapted two superconducting single cavities as the capture section for the low injecting energy of 100 keV electrons. Coupler kick induced beam deflection and projected emittance growth are one of the prime concerns of the beam stability, especially at low energies. In low energy applications, the electron velocity changes rapidly inside the cavity, which makes the numerical analysis much more complicated. The commonly used theoretical formulas of the direct integral or the Panofsky-Wenzel theorem is not suitable for the kick calculation of β < 1 electrons. Despite that, the above mentioned kick calculation method doesn't consider injecting electron energy, the beam offset due to the coupler kick may not be negligible because of the low injection energy even if the kick is optimized. Thus the beam dynamics code TRACK is used here for the simulation of the power coupler kick perturbation. The coupler kick can be compensated for by a judicious choice of the coupler position in successive cavities from upstream to downstream. The simulation shows that because of the adiabatic damping by the following superconducting 9-cell cavity, even for the worst orbit distortion case after two capture cavities, the kick is still acceptable at the exit of the ICM after reaching 10 MeV. This paper presents the analysis of the transverse kick and the projected emittance growth induced by the coupler for β < 1 electrons. The simulated results of the TRIUMF ICM capture cavities are described and presented.

  19. Power coupler kick of the TRIUMF ICM capture cavities

    Institute of Scientific and Technical Information of China (English)

    YAN Fang; R.E. Laxdal; V. Zvyagintsev; Yu. Chao; C. Gong; S. Koscielniak

    2011-01-01

    The TRIUMF Injector CryoModule (ICM) adapted two superconducting single cavities as the capture section for the low injecting energy of 100 keV electrons. Coupler kick induced beam deflection and projected emittance growth are one of the prime concerns of the beam stability, especially at low energies. In low energy applications, the electron velocity changes rapidly inside the cavity, which makes the numerical analysis much more complicated. The commonly used theoretical formulas of the direct integral or the Panofsky- Wenzel theorem is not suitable for the kick calculation of β <1 electrons. Despite that, the above mentioned kick calculation method doesn't consider injecting electron energy, the beam offset due to the coupler kick may not be negligible because of the low injection energy even if the kick is optimized. Thus the beam dynamics code TRACK is used here for the simulation of the power coupler kick perturbation. The coupler kick can be compensated for by a judicious choice of the coupler position in successive cavities from upstream to downstream. The simulation shows that because of the adiabatic damping by the following superconducting 9-cell cavity, even for the worst orbit distortion case after two capture cavities, the kick is still acceptable at the exit of the ICM after reaching 10 MeV. This paper presents the analysis of the transverse kick and the projected emittance growth induced by the coupler for β <1 electrons. The simulated results of the TRIUMF ICM capture cavities are described and presented.

  20. Fused-Polished Fiber Couplers

    Institute of Scientific and Technical Information of China (English)

    Sien; Chi; Shiao-Min; Tseng

    2003-01-01

    We report on fused-polished fiber couplers with a new fabrication method. This structure so fabricated is promising while achieving high-performance all-fiber WDM devices. Potential advantages and prospects of our works are presented.

  1. Wide stop-band filters consisted of optical directional coupler type multi resonators; Hikari hokosei ketsugoki wo mochiita fukugo kyoshinki ni yoru kososhiiki wo yusuru koha fuiruta no kento

    Energy Technology Data Exchange (ETDEWEB)

    Furuta, Hirosuke; Nishikawa, Kenji; Miyamoto, Tokuo

    1999-03-01

    It is important that pass-band and stop-band of the optical filter used for optical wavelength division multiplexing systems can be set up according to systems requirements. In this paper, we presented expanding of stop-band using multi-resonator consisted of optical directional coupler. In this resonator, addition to interferences by resonation, the path length difference between two different path from input-port to output-port cause intensity changes. To use these interferences, we considerated expanding of stop-band and suppressing of resonate peak in stop-band. 30GHz passband and 60GHz cut-off frequency at 20dB point are calculated. If expanding the stop-band up to 10THz, the loss in the stop-band coms down to 24dB. (author)

  2. 1×3 Beam Splitter Based on Photonic Crystal Waveguides Directional Coupler%光子晶体波导定向耦合型1×3光分束器

    Institute of Scientific and Technical Information of China (English)

    陈淑文; 朱桂新; 于天宝; 廖清华; 刘念华; 黄永箴

    2009-01-01

    将五光子晶体单模波导平行、邻近放置构成定向耦合器,依据自映像原理,数值分析了输入光场对称入射时,该系统中光的传播行为.基于此结构,设计了1×3光分束器,其器件长度可短至14.26μm.仅仅通过对称地改变耦合区中两个介质柱的有效折射率,使光场在横向发生重新分布,便可实现输出能量的均分或自由分配.通过非对称地改变耦合区中的一个介质柱,可实现3个输出端的输出能量的自由分配.该光分束器具有微小尺寸和各输出端输出能量的比例可自由调制的特点,在未来集成光回路中具有广泛的应用价值.%Directional coupler can be constructed by parallelly putting five photonic crystal waveguides together. The propagation of the optical field entering this system symmetrically is analyzed numerically on the basis of self-imaging principle. 1×3 beam splitter, whose length can be as short as 14. 26 μm, is designed by using this structure. By symmetrically tuning the effective refractive index of two dielectric rods in the coupler, and accordingly inducing the redistribution of the electric field, equipartition or free distribution of output energy can be achieved. By asymmetrically tuning the effective refractive index of one dielectric rod in the coupler, free distribution of output energy can also be achieved. Due to the ultracompact size and the free modulation of output energy, the device has extensive practical value in future photonic integrated circuits.

  3. Direct observation of coherent energy transfer in nonlinear micromechanical oscillators

    Science.gov (United States)

    Chen, Changyao; Zanette, Damián H.; Czaplewski, David A.; Shaw, Steven; López, Daniel

    2017-05-01

    Energy dissipation is an unavoidable phenomenon of physical systems that are directly coupled to an external environmental bath. In an oscillatory system, it leads to the decay of the oscillation amplitude. In situations where stable oscillations are required, the energy dissipated by the vibrations is usually compensated by replenishment from external energy sources. Consequently, if the external energy supply is removed, the amplitude of oscillations start to decay immediately, since there is no means to restitute the energy dissipated. Here, we demonstrate a novel dissipation engineering strategy that can support stable oscillations without supplying external energy to compensate losses. The fundamental intrinsic mechanism of resonant mode coupling is used to redistribute and store mechanical energy among vibrational modes and coherently transfer it back to the principal mode when the external excitation is off. To experimentally demonstrate this phenomenon, we exploit the nonlinear dynamic response of microelectromechanical oscillators to couple two different vibrational modes through an internal resonance.

  4. Direct observation of coherent energy transfer in nonlinear micromechanical oscillators.

    Science.gov (United States)

    Chen, Changyao; Zanette, Damián H; Czaplewski, David A; Shaw, Steven; López, Daniel

    2017-05-26

    Energy dissipation is an unavoidable phenomenon of physical systems that are directly coupled to an external environmental bath. In an oscillatory system, it leads to the decay of the oscillation amplitude. In situations where stable oscillations are required, the energy dissipated by the vibrations is usually compensated by replenishment from external energy sources. Consequently, if the external energy supply is removed, the amplitude of oscillations start to decay immediately, since there is no means to restitute the energy dissipated. Here, we demonstrate a novel dissipation engineering strategy that can support stable oscillations without supplying external energy to compensate losses. The fundamental intrinsic mechanism of resonant mode coupling is used to redistribute and store mechanical energy among vibrational modes and coherently transfer it back to the principal mode when the external excitation is off. To experimentally demonstrate this phenomenon, we exploit the nonlinear dynamic response of microelectromechanical oscillators to couple two different vibrational modes through an internal resonance.

  5. Nonlinear theory of autooscillations of quasiplanar interface during directional solidification

    CERN Document Server

    Lubashevsky, I A; Keijan, M G

    1998-01-01

    Within the framework of the frozen temperature approximation we develop a strongly-nonlinear theory of one-dimensional pattern formation during directional solidification of binary mixture under nonequilibrium segregation. In the case of small partition coefficient the full problem is reduced to the system of two ordinary differential equations describing the interface motion in terms of its velocity and position coordinate. The type of the oscillatory instability bifurcation is studied in detail in different limits. For the subcrytical bifurcaton relaxation interface oscillations are analyzed analytically and numerically. We show that these oscillation exibit a number of anomalous properies. In particular, such oscillations can be weakly- or strongly-dissipative depending on the physical parameters and the amplitude of the strongly-dissipative oscillations is determined not only by the form of the corresponding nullcline but also by the behavior of the system for small values of the interface velocity. Chara...

  6. Robust direct adaptive fuzzy control for nonlinear MIMO systems

    Institute of Scientific and Technical Information of China (English)

    ZHANG Huaguang; ZHANG Mingjun

    2006-01-01

    For a class of nonlinear multi-input multi-output systems with uncertainty, a robust direct adaptive fuzzy control scheme was proposed. The feedback control law and adaptive law for parameters were derived based on Lyapunov design approach. The overall control scheme can guarantee that the tracking error converges in the small neighborhood of origin, and all signals of the closed-loop system are uniformly bounded. The main advantage of the proposed control scheme is that in each subsystem only one parameter vector needs to be adjusted on-line in the adaptive mechanism, and so the on-line computing burden is reduced. In addition, the proposed control scheme is a smooth control with no chattering phenomena. A simulation example was proposed to demonstrate the effectiveness of the proposed control algorithm.

  7. 30 CFR 75.805 - Couplers.

    Science.gov (United States)

    2010-07-01

    ... the ground conductor in the cable. The coupler shall be constructed so that the ground check continuity conductor shall be broken first and the ground conductors shall be broken last when the coupler...

  8. Refractive index engineering of high performance coupler for compact photonic integrated circuits

    Science.gov (United States)

    Liu, Lu; Zhou, Zhiping

    2017-04-01

    High performance couplers are highly desired in many applications, but the design is limited by nearly unchangeable material refractive index. To tackle this issue, refractive index engineering method is investigated, which can be realized by subwavelength grating. Subwavelength gratings are periodical structures with pitches small enough to locally synthesize the refractive index of photonic waveguides, which allows direct control of optical profile as well as easier fabrication process. This review provides an introduction to the basics of subwavelength structures and pay special attention to the design strategies of some representative examples of subwavelength grating devices, including: edge couplers, fiber-chip grating couplers, directional couplers and multimode interference couplers. Benefited from the subwavelength grating which can engineer the refractive index as well as birefringence and dispersion, these devices show better performance when compared to their conventional counterparts.

  9. Wireless power transfer magnetic couplers

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Hunter; Gilchrist, Aaron; Sealy, Kylee

    2016-01-19

    A magnetic coupler is disclosed for wireless power transfer systems. A ferrimagnetic component is capable of guiding a magnetic field. A wire coil is wrapped around at least a portion of the ferrimagnetic component. A screen is capable of blocking leakage magnetic fields. The screen may be positioned to cover at least one side of the ferrimagnetic component and the coil. A distance across the screen may be at least six times an air gap distance between the ferrimagnetic component and a receiving magnetic coupler.

  10. Power coupler for the ILC crab cavity

    Energy Technology Data Exchange (ETDEWEB)

    Burt, G.; Dexter, A.; Jenkins, R.; /Lancaster U.; Beard, C.; Goudket, P.; McIntosh, P.A.; /Daresbury; Bellantoni, Leo; /Fermilab

    2007-06-01

    The ILC crab cavity will require the design of an appropriate power coupler. The beam-loading in dipole mode cavities is considerably more variable than accelerating cavities, hence simulations have been performed to establish the required external Q. Simulations of a suitable coupler were then performed and were verified using a normal conducting prototype with variable coupler tips.

  11. The LINAC4 Power Coupler

    CERN Document Server

    Gerigk, F; Montesinos, E; Riffaud, B; Ugena Tirado, P; Wegner, R

    2011-01-01

    Linac4 is employing three types of accelerating structures after the RFQ: a Drift Tube Linac (DTL), a Cell- Coupled DTL (CCDTL), and a Pi-Mode Structure (PIMS) to accelerate the beam up to 160 MeV at 352.2MHz. The structures are designed for a peak power of approximately 1 MW per power coupler, which is transported via rectangular waveguides from the klystron gallery to the RF cavities. The coupler itself consists of two parts: a ceramic window, which separates the cavity vacuum from the air in the waveguides, and a Tuner-adjustablewaveguide Coupler (TaCo), which couples the RF power through an iris to the cavity. In the frame of the Linac4 R&D both devices have been significantly improvedwith respect to their commonly used design. On the coupler side, the waveguide short circuit with its matched length has been replaced by a fixedlength /4 short circuit. The RF matching is done by a simple piston tuner, which allows a quick matching to different cavity quality factors. In the window part, which usually c...

  12. A linear atomic quantum coupler

    Energy Technology Data Exchange (ETDEWEB)

    El-Orany, Faisal A A [Department of Mathematics and computer Science, Faculty of Science, Suez Canal University 41522, Ismailia (Egypt); Wahiddin, M R B, E-mail: el_orany@hotmail.co, E-mail: faisal.orany@mimos.m, E-mail: mridza@mimos.m [Cyberspace Security Laboratory, MIMOS Berhad, Technology Park Malaysia, 57000 Kuala Lumpur (Malaysia)

    2010-04-28

    In this paper we develop the notion of the linear atomic quantum coupler. This device consists of two modes propagating into two waveguides, each of which includes a localized atom. These waveguides are placed close enough to allow exchange of energy between them via evanescent waves. Each mode interacts with the atom in the same waveguide in the standard way as the Jaynes-Cummings model (JCM) and with the atom-mode system in the second waveguide via the evanescent wave. We present the Hamiltonian for this system and deduce its wavefunction. We investigate the atomic inversions and the second-order correlation function. In contrast to the conventional coupler the atomic quantum coupler is able to generate nonclassical effects. The atomic inversions can exhibit a long revival-collapse phenomenon as well as subsidiary revivals based on the competition among the switching mechanisms in the system. Finally, under certain conditions the system can yield the results of the two-mode JCM.

  13. Analysis and Design of Three-Line Microstrip Couplers on Anisotropic Substrates

    Science.gov (United States)

    Yu, Lukang

    The behavior of guided modes and their associated properties of three-line microstrip couplers on anisotropic substrates are investigated in this dissertation. The wave propagation on these lines is described by three normal modes modified by the mutual coupling between the lines under the quasi-TEM assumption. The conditions for the equalization of the mode impedances and phase velocities, and the matching and isolation of the coupler ports are derived using the normal-mode characteristics and six-port scattering parameters. The use of dielectric anisotropy is suggested as a means to improve the coupler directivity degraded by the structural inhomogeneity. Analytical results based on the coupled-mode formulation are summarized. The Green's function for the microstrip configuration is derived to transform an anisotropic problem into an isotropic problem. The normal-mode characteristics of the coupler are determined from the structural capacitances. Effects due to strip -thickness, loss and dispersion are dealt with. The design equations for symmetrical lines are derived. The existence of an ideal six-port directional coupler is proved and the singular behavior of the normal-mode parameters occurring at the critical point of coupling-coefficient equalization is examined. Typical applications of three-line microstrip couplers in microwave integrated circuits are discussed with simulation results. Experimental results of a coupler fabricated on an Epsilam-10 substrate are presented for the verification of the theoretical findings.

  14. C-Coupler1: a Chinese community coupler for Earth System Modelling

    Directory of Open Access Journals (Sweden)

    L. Liu

    2014-06-01

    Full Text Available Coupler is a fundamental software tool for Earth System Modelling. Targeting the requirements of 3-D coupling, high-level sharing, common model software platform and better parallel performance, we started to design and develop a community coupler (C-Coupler from 2010 in China, and finished the first version (C-Coupler1 recently. The C-Coupler1 is a parallel 3-D coupler that achieves the same (bit-identical result with any number of processes. Guided by the general design of the C-Coupler, the C-Coupler1 enables various component models and various coupled model versions to be integrated on the same common model software platform to achieve a~higher-level sharing, where the component models and the coupler can keep the same code version in various model versions for simulation. Moreover, it provides the C-Coupler platform, a uniform runtime environment for operating various kinds of model simulations in the same manner. Now the C-Coupler1 is ready for Earth System Modelling, and it is publicly available. In China, there are more and more model groups using the C-Coupler1 for the development and application of models.

  15. Integrated asymmetric vertical coupler pressure sensors

    Science.gov (United States)

    Kiyat, Isa; Kocabas, Askin; Akcag, Imran; Aydinli, Atilla

    2004-08-01

    Design and analysis of a novel pressure sensor based on a silicon-on-insulator asymmetric integrated vertical coupler is presented. The coupler is composed of a single mode low index waveguide and a thin silicon slab. Wavelength selective optical modulation of asymmetric vertical coupler is examined in detail. Its potential for sensing applications is highlighted as an integrated optical pressure sensor which can be realized by standard silicon micro-fabrication. Sensitivity of transmission of such couplers on refractive index change of silicon slab ensures that they are good candidates for applications requiring high sensitivities.

  16. LHC Crab Cavity Coupler Test Boxes

    CERN Document Server

    Mitchell, James; Burt, Graeme; Calaga, Rama; Macpherson, Alick; Montesinos, Eric; Silva, Subashini; Tutte, Adam; Xiao, Binping

    2016-01-01

    The LHC double quarter wave (DQW) crab cavities have two different types of Higher Order Mode (HOM) couplers in addition to a fundamental power coupler (FPC). The FPC requires conditioning, so to achieve this we have designed a radio-frequency (RF) quarter wave resonator to provide high transmission between two opposing FPCs. For the HOM couplers we must ensure that the stop-band filter is positioned at the cavity frequency and that peak transmission occurs at the same frequencies as the strongest HOMs. We have designed two test boxes which preserve the cavity spectral response in order to test the couplers.

  17. RF Power and HOM Coupler Tutorial

    Energy Technology Data Exchange (ETDEWEB)

    Rusnak, B

    2003-10-28

    Radio frequency (RF) couplers are used on superconducting cavities to deliver RF power for creating accelerating fields and to remove unwanted higher-order mode power for reducing emittance growth and cryogenic load. RF couplers in superconducting applications present a number of interdisciplinary design challenges that need to be addressed, since poor performance in these devices can profoundly impact accelerator operations and the overall success of a major facility. This paper will focus on critical design issues for fundamental and higher order mode (HOM) power couplers, highlight a sampling of reliability-related problems observed in couplers, and discuss some design strategies for improving performance.

  18. Effect of technological parameters on optical performance of fiber coupler

    Institute of Scientific and Technical Information of China (English)

    SHUAI Ci-jun; DUAN Ji-an; ZHONG Jue

    2007-01-01

    To find out the influence of technological parameters on optical performance of fused optical fiber device, the fiber coupler was served as subject investigated by using the fused biconical taper machining as experimental setup. Fused fiber coupler's optical performances such as insertion loss, excess loss, directivity and uniformity were tested with the optical test system that was constituted of tunable laser and optical spectrum analyzer. Especially the relationship between optical performance and drawing speed was investigated. The experimental results show that the optical performance is closely related to process conditions. At fused temperature of 1 200℃, there exists a drawing speed of 150 μm/s, which makes the device's performance optimum. Out of this speed region, the optical performance drops quickly. At drawing speed of 200 tm/s, the excess loss is relatively small when the fused temperature is above 1 200℃. So the technological parameters have close relationship with optical performance of the coupler, and the good performance coupler can't get until the drawing speed and fused temperature match accurately.

  19. A Direct Algebraic Method in Finding Particular Solutions to Some Nonlinear Evolution Equations

    Institute of Scientific and Technical Information of China (English)

    LIUChun-Ping; CHENJian-Kang; CAIFan

    2004-01-01

    Firstly, a direct algebraic method and a routine way in finding traveling wave solutions to nonlinear evolution equations are explained. And then some new exact solutions for some evolution equations are obtained by using the method.

  20. Analysis of nonlinearities and effects in direct drive electro-hydraulic position servo system

    Institute of Scientific and Technical Information of China (English)

    WANG Hong-jie; JI Tian-jing; MAO Xin-tao; LIU Quan-zhong

    2005-01-01

    The direct drive electro-hydraulic servo system is a new approach hydraulic system. It is much smaller and easier controlled than traditional systems and is a perfect energy saver. This paper will briefly introduce the popular nonlinearities in the electro-hydraulic system and analyse the effect of nonlinearities in direct drive electro-hydraulic position servo system by means of simulation research. Some valuable conclusions are given.

  1. Integrated Optical Asymmetric Coupler Pressure Sensor

    Science.gov (United States)

    Kiyat, Isa; Kocabas, Coskun; Aydinli, Atilla

    2004-05-01

    Analysis of a novel pressure sensor based on a silicon-on-insulator (SOI) asymmetric vertical coupler is presented. The integrated optical component is a coupler composed of a single mode (SM) low index waveguide and a thin silicon slab. High sensitivities of about 0.14 rad.kPa-1 should be achieved.

  2. A Novel Multimode Waveguide Coupler for Accurate Power Measurement of Traveling Wave Tube Harmonic Frequencies

    Science.gov (United States)

    Wintucky, Edwin G.; Simons, Rainee N.

    2014-01-01

    This paper presents the design, fabrication and test results for a novel waveguide multimode directional coupler (MDC). The coupler fabricated from two dissimilar waveguides is capable of isolating the power at the second harmonic frequency from the fundamental power at the output port of a traveling-wave tube (TWT). In addition to accurate power measurements at harmonic frequencies, a potential application of the MDC is in the design of a beacon source for atmospheric propagation studies at millimeter-wave frequencies.

  3. High Power Co-Axial Coupler

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, M. [Muons, Inc.; Dudas, A. [Muons, Inc.; Rimmer, Robert A. [JLAB; Guo, Jiquan [JLAB; Williams, R. Scott [JLAB

    2013-12-01

    A very high power Coax RF Coupler (MW-Level) is very desirable for a number of accelerator and commercial applications. For example, the development of such a coupler operating at 1.5 GHz may permit the construction of a higher-luminosity version of the Electron-Ion Collider (EIC) being planned at JLab. Muons, Inc. is currently funded by a DOE STTR grant to develop a 1.5-GHz high-power doublewindowcoax coupler with JLab (about 150 kW). Excellent progress has been made on this R&D project, so we propose an extension of this development to build a very high power coax coupler (MW level peak power and a max duty factor of about 4%). The dimensions of the current coax coupler will be scaled up to provide higher power capability.

  4. Correntropy-based partial directed coherence for testing multivariate Granger causality in nonlinear processes

    Science.gov (United States)

    Kannan, Rohit; Tangirala, Arun K.

    2014-06-01

    Identification of directional influences in multivariate systems is of prime importance in several applications of engineering and sciences such as plant topology reconstruction, fault detection and diagnosis, and neurosciences. A spectrum of related directionality measures, ranging from linear measures such as partial directed coherence (PDC) to nonlinear measures such as transfer entropy, have emerged over the past two decades. The PDC-based technique is simple and effective, but being a linear directionality measure has limited applicability. On the other hand, transfer entropy, despite being a robust nonlinear measure, is computationally intensive and practically implementable only for bivariate processes. The objective of this work is to develop a nonlinear directionality measure, termed as KPDC, that possesses the simplicity of PDC but is still applicable to nonlinear processes. The technique is founded on a nonlinear measure called correntropy, a recently proposed generalized correlation measure. The proposed method is equivalent to constructing PDC in a kernel space where the PDC is estimated using a vector autoregressive model built on correntropy. A consistent estimator of the KPDC is developed and important theoretical results are established. A permutation scheme combined with the sequential Bonferroni procedure is proposed for testing hypothesis on absence of causality. It is demonstrated through several case studies that the proposed methodology effectively detects Granger causality in nonlinear processes.

  5. Nonlinear impairment compensation for DFT-S OFDM signal transmission with directly modulated laser and direct detection

    Science.gov (United States)

    Gou, Pengqi; Wang, Kaihui; Qin, Chaoyi; Yu, Jianjun

    2017-03-01

    We experimentally demonstrate a 16-ary quadrature amplitude modulation (16QAM) DFT-spread optical orthogonal frequency division multiplexing (OFDM) transmission system utilizing a cost-effective directly modulated laser (DML) and direct detection. For 20-Gbaud 16QAM-OFDM signal, with the aid of nonlinear equalization (NLE) algorithm, we respectively provide 6.2-dB and 5.2-dB receiver sensitivity improvement under the hard-decision forward-error-correction (HD-FEC) threshold of 3.8×10-3 for the back-to-back (BTB) case and after transmission over 10-km standard single mode fiber (SSMF) case, related to only adopt post-equalization scheme. To our knowledge, this is the first time to use dynamic nonlinear equalizer (NLE) based on the summation of the square of the difference between samples in one IM/DD OFDM system with DML to mitigate nonlinear distortion.

  6. Directional dependence of nonlinear surface acoustic waves in the (001) plane of cubic crystals.

    Science.gov (United States)

    Kumon, R E; Hamilton, M F

    2002-05-01

    Spectral evolution equations are used to perform analytical and numerical studies of nonlinear surface acoustic waves in the (001) plane of a variety of nonpiezoelectric cubic crystals. The basic theory underlying the model equations is outlined, and quasilinear solutions of the equations are presented. Expressions are also developed for a characteristic length scale for nonlinear distortion and a nonlinearity coefficient. A time-domain equation corresponding to the spectral equations is derived. Numerical calculations based on measured second- and third-order elastic constants taken from the literature are performed to predict the evolution of initially monofrequency surface waves. Nonlinearity matrix elements that indicate the coupling strength of harmonic interactions are shown to provide a useful tool for characterizing waveform distortion. The formation of compression or rarefaction shocks can be strongly dependent on the direction of propagation, and harmonic generation is suppressed or increased in certain directions.

  7. Miniature mechanical transfer optical coupler

    Science.gov (United States)

    Abel, Philip; Watterson, Carl

    2011-02-15

    A miniature mechanical transfer (MT) optical coupler ("MMTOC") for optically connecting a first plurality of optical fibers with at least one other plurality of optical fibers. The MMTOC may comprise a beam splitting element, a plurality of collimating lenses, and a plurality of alignment elements. The MMTOC may optically couple a first plurality of fibers disposed in a plurality of ferrules of a first MT connector with a second plurality of fibers disposed in a plurality of ferrules of a second MT connector and a third plurality of fibers disposed in a plurality of ferrules of a third MT connector. The beam splitting element may allow a portion of each beam of light from the first plurality of fibers to pass through to the second plurality of fibers and simultaneously reflect another portion of each beam of light from the first plurality of fibers to the third plurality of fibers.

  8. Overview of recent HOM coupler development

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, B. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-09-13

    Higher Order Mode (HOM) damping is important for SRF applications, especially for high-intensity machines. A good HOM damping design will help to reduce power load to the cryogenic system and to reduce the risk of beam breakup. The design of HOM damping, including antenna/loop HOM couplers, beam pipe HOM absorbers and waveguide HOM couplers, is to solve a multi-physics problem that involves RF, thermal, mechanical, and beam-cavity interaction issues. In this talk, the author provides an overview on the latest advances of the HOM couplers for high-intensity SRF applications.

  9. Optical mode switch based on multimode interference couplers

    Science.gov (United States)

    Xiao, Huifu; Deng, Lin; Zhao, Guolin; Liu, Zilong; Meng, Yinghao; Guo, Xiaonan; Liu, Guipeng; Liu, Su; Ding, Jianfeng; Tian, Yonghui

    2017-02-01

    In this paper, we propose an optical mode switch based on two cascaded multimode interference (MMI) couplers. After a fundamental mode divided into two equal-power fundamental modes in the first MMI coupler, the thermo-optic effect is employed to modulate the phase of the two fundamental modes before directed to the next MMI for the purpose of mode switching. By adjusting the electric signals applied to the modulation arms, the proposed device can implement mode switching in three states: (a) one first-order and two fundamental modes simultaneously output, (b) one first-order mode output, and (c) two fundamental modes output. As a result, the simulated excess losses are -0.29 dB, -0.10 dB, and -0.63 dB, respectively.

  10. Vacuum fiber-fiber coupler

    Science.gov (United States)

    Heinrici, Axel; Bjelajac, Goran; Jonkers, Jeroen; Jakobs, Stefan; Olschok, Simon; Reisgen, Uwe

    2017-02-01

    Research and development carried out by the ISF Welding and Joining Institute of RWTH Aachen University has proven that combining high power laser and low vacuum atmosphere provides a welding performance and quality, which is comparable to electron beam welding. The developed welding machines are still using a beam forming which takes place outside the vacuum and the focusing laser beam has to be introduced to the vacuum via a suitable window. This inflexible design spoils much of the flexibility of modern laser welding. With the target to bring a compact, lightweight flying optics with flexible laser transport fibers into vacuum chambers, a high power fiber-fiber coupler has been adapted by II-VI HIGHYAG that includes a reliable vacuum interface. The vacuum-fiber-fiber coupler (V-FFC) is tested with up to 16 kW sustained laser power and the design is flexible in terms of a wide variety of laser fiber plug systems and vacuum flanges. All that is needed to implement the V-FFC towards an existing or planned vacuum chamber is an aperture of at least 100 mm (4 inch) diameter with any type of vacuum or pressure flange. The V-FFC has a state-of-the-art safety interface which allows for fast fiber breakage detection for both fibers (as supported by fibers) by electric wire breakage and short circuit detection. Moreover, the System also provides connectors for cooling and electric signals for the laser beam optics inside the vacuum. The V-FFC has all necessary adjustment options for coupling the laser radiation to the receiving fiber.

  11. PALM: a Parallel Dynamic Coupler

    Science.gov (United States)

    Thevenin, A.; Morel, T.

    2008-12-01

    In order to efficiently represent complex systems, numerical modeling has to rely on many physical models at a time: an ocean model coupled with an atmospheric model is at the basis of climate modeling. The continuity of the solution is granted only if these models can constantly exchange information. PALM is a coupler allowing the concurrent execution and the intercommunication of programs not having been especially designed for that. With PALM, the dynamic coupling approach is introduced: a coupled component can be launched and can release computers' resources upon termination at any moment during the simulation. In order to exploit as much as possible computers' possibilities, the PALM coupler handles two levels of parallelism. The first level concerns the components themselves. While managing the resources, PALM allocates the number of processes which are necessary to any coupled component. These models can be parallel programs based on domain decomposition with MPI or applications multithreaded with OpenMP. The second level of parallelism is a task parallelism: one can define a coupling algorithm allowing two or more programs to be executed in parallel. PALM applications are implemented via a Graphical User Interface called PrePALM. In this GUI, the programmer initially defines the coupling algorithm then he describes the actual communications between the models. PALM offers a very high flexibility for testing different coupling techniques and for reaching the best load balance in a high performance computer. The transformation of computational independent code is almost straightforward. The other qualities of PALM are its easy set-up, its flexibility, its performances, the simple updates and evolutions of the coupled application and the many side services and functions that it offers.

  12. Estimating nonlinear mixing effects for arid vegetation scenes with MISR channels and observation directions

    Energy Technology Data Exchange (ETDEWEB)

    Villeneuve, P.V.; Gerstl, S.A. [Los Alamos National Lab., NM (United States); Asner, G.P. [Univ. of Colorado, Boulder, CO (United States)

    1998-12-01

    A Monte-Carlo ray-trace model has been applied to simulated sparse vegetation desert canopies in an effort to quantify the spectral mixing (both linear and nonlinear) occurring as a result of radiative interactions between vegetation and soil. This work is of interest as NASA is preparing to launch new instruments such as MISR and MODIS. MISR will observe each ground pixel from nine different directions in three visible channels and one near-infrared channel. It is desired to study angular variations in spectral mixing by quantifying the amount of nonlinear spectral mixing occurring in the MISR observing directions.

  13. A Tandem Coupler for Terahertz Integrated Circuits

    Science.gov (United States)

    Reck, Theodore J.; Deal, William; Chattopadhyay, Goutam

    2013-01-01

    A coplanar waveguide 3 dB quadrature coupler operating from 500 to 700 GHz is designed, fabricated and measured. On-wafer measurements demonstrate an amplitude balance of +/-2 dB and phase balance of +/-20 deg.

  14. Planar antenna system for direction finding

    Science.gov (United States)

    Mardale, Iulia-Cezara; Cocias, Gabriela; Dumitrascu, Ana; Tamas, Razvan; Berescu, Serban

    2015-02-01

    Applications of direction finding techniques include detection and localization of pulsed electromagnetic sources. This paper presents the design and analysis of a planar antenna system for direction finding. Our proposed system includes 4 hybrid couplers that generate 900 shifted signals, 2 crossover couplers also known as 0dB couplers, two 450 phase shifters, two 00 phase shifters and 4 patch antennas.

  15. Direct generation of optical frequency combs in $\\chi^{(2)}$ nonlinear cavities

    CERN Document Server

    Mosca, S; Parisi, M; Maddaloni, P; Santamaria, L; De Natale, P; De Rosa, M

    2015-01-01

    Quadratic nonlinear processes are currently exploited for frequency comb transfer and extension from the visible and near infrared regions to other spectral ranges where direct comb generation cannot be accomplished. However, frequency comb generation has been directly observed in continuously-pumped quadratic nonlinear crystals placed inside an optical cavity. At the same time, an introductory theoretical description of the phenomenon has been provided, showing a remarkable analogy with the dynamics of third-order Kerr microresonators. Here, we give an overview of our recent work on $\\chi^{(2)}$ frequency comb generation. Furthermore, we generalize the preliminary three-wave spectral model to a many-mode comb and present a stability analysis of different cavity field regimes. Although at a very early stage, our work lays the groundwork for a novel class of highly efficient and versatile frequency comb synthesizers based on second-order nonlinear materials.

  16. Direct generation of optical frequency combs in χ(2 nonlinear cavities

    Directory of Open Access Journals (Sweden)

    Mosca Simona

    2016-06-01

    Full Text Available Quadratic nonlinear processes are currently exploited for frequency comb transfer and extension from the visible and near infrared regions to other spectral ranges where direct comb generation cannot be accomplished. However, frequency comb generation has been directly observed in continuously pumped quadratic nonlinear crystals placed inside an optical cavity. At the same time, an introductory theoretical description of the phenomenon has been provided, showing a remarkable analogy with the dynamics of third-order Kerr microresonators. Here, we give an overview of our recent work on χ(2 frequency comb generation. Furthermore, we generalize the preliminary three-wave spectral model to a many-mode comb and present a stability analysis of different cavity field regimes. Although our work is a very early stage, it lays the groundwork for a novel class of highly efficient and versatile frequency comb synthesizers based on second-order nonlinear materials.

  17. EXACT SOLITARY WAVE SOLUTIONS TO A CLASS OF NONLINEAR DIFFERENTIAL EQUATIONS USING DIRECT ALGEBRAIC METHOD

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Using direct algebraic method,exact solitary wave solutions are performed for a class of third order nonlinear dispersive disipative partial differential equations. These solutions are obtained under certain conditions for the relationship between the coefficients of the equation. The exact solitary waves of this class are rational functions of real exponentials of kink-type solutions.

  18. A direct algebraic method applied to obtain complex solutions of some nonlinear partial differential equations

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Huiqun [College of Mathematical Science, Qingdao University, Qingdao, Shandong 266071 (China)], E-mail: hellozhq@yahoo.com.cn

    2009-02-15

    By using some exact solutions of an auxiliary ordinary differential equation, a direct algebraic method is described to construct the exact complex solutions for nonlinear partial differential equations. The method is implemented for the NLS equation, a new Hamiltonian amplitude equation, the coupled Schrodinger-KdV equations and the Hirota-Maccari equations. New exact complex solutions are obtained.

  19. Second-Order Consensus for Multiagent Systems With Directed Topologies and Nonlinear Dynamics

    NARCIS (Netherlands)

    Yu, Wenwu; Chen, Guanrong; Cao, Ming; Kurths, Juergen; Kurths, Jürgen

    This paper considers a second-order consensus problem for multiagent systems with nonlinear dynamics and directed topologies where each agent is governed by both position and velocity consensus terms with a time-varying asymptotic velocity. To describe the system's ability for reaching consensus, a

  20. Numerical Tracking of Limit Points for Direct Parametric Analysis in Nonlinear Rotordynamics

    OpenAIRE

    Xie, Lihan; Baguet, Sébastien; Prabel, Benoit; Dufour, Régis

    2016-01-01

    International audience; A frequency-domain approach for direct parametric analysis of limit points of nonlinear dynamical systems is presented in this paper. Instead of computing responses curves for several values of a given system parameter, the direct tracking of limit points is performed. The whole numerical procedure is based on the Harmonic Balance Method and can be decomposed in three distinct steps. Firstly, a response curve is calculated by HBM combined with a continuation technique ...

  1. Non-linear direct effects of acid rain on leaf photosynthetic rate of terrestrial plants.

    Science.gov (United States)

    Dong, Dan; Du, Enzai; Sun, Zhengzhong; Zeng, Xuetong; de Vries, Wim

    2017-09-12

    Anthropogenic emissions of acid precursors have enhanced global occurrence of acid rain, especially in East Asia. Acid rain directly suppresses leaf function by eroding surface waxes and cuticle and leaching base cations from mesophyll cells, while the simultaneous foliar uptake of nitrates in rainwater may directly benefit leaf photosynthesis and plant growth, suggesting a non-linear direct effect of acid rain. By synthesizing data from literature on acid rain exposure experiments, we assessed the direct effects of acid rain on leaf photosynthesis across 49 terrestrial plants in China. Our results show a non-linear direct effect of acid rain on leaf photosynthetic rate, including a neutral to positive effect above pH 5.0 and a negative effect below that pH level. The acid rain sensitivity of leaf photosynthesis showed no significant difference between herbs and woody species below pH 5.0, but the impacts above that pH level were strongly different, resulting in a significant increase in leaf photosynthetic rate of woody species and an insignificant effect on herbs. Our analysis also indicates a positive effect of the molar ratio of nitric versus sulfuric acid in the acid solution on leaf photosynthetic rate. These findings imply that rainwater acidity and the composition of acids both affect the response of leaf photosynthesis and therefore result in a non-linear direct effect. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. ISS method for coordination control of nonlinear dynamical agents under directed topology.

    Science.gov (United States)

    Wang, Xiangke; Qin, Jiahu; Yu, Changbin

    2014-10-01

    The problems of coordination of multiagent systems with second-order locally Lipschitz continuous nonlinear dynamics under directed interaction topology are investigated in this paper. A completely nonlinear input-to-state stability (ISS)-based framework, drawing on ISS methods, with the aid of results from graph theory, matrix theory, and the ISS cyclic-small-gain theorem, is proposed for the coordination problem under directed topology, which can effectively tackle the technical challenges caused by locally Lipschitz continuous dynamics. Two coordination problems, i.e., flocking with a virtual leader and containment control, are considered. For both problems, it is assumed that only a portion of the agents can obtain the information from the leader(s). For the first problem, the proposed strategy is shown effective in driving a group of nonlinear dynamical agents reach the prespecified geometric pattern under the condition that at least one agent in each strongly connected component of the information-interconnection digraph with zero in-degree has access to the state information of the virtual leader; and the strategy proposed for the second problem can guarantee the nonlinear dynamical agents moving to the convex hull spanned by the positions of multiple leaders under the condition that for each agent there exists at least one leader that has a directed path to this agent.

  3. Low-loss silicon slot waveguides and couplers fabricated with optical lithography and atomic layer deposition.

    Science.gov (United States)

    Säynätjoki, A; Karvonen, L; Alasaarela, T; Tu, X; Liow, T Y; Hiltunen, M; Tervonen, A; Lo, G Q; Honkanen, S

    2011-12-19

    We demonstrate low-loss silicon slot waveguides patterned with 248 nm deep-UV lithography and filled with atomic layer deposited aluminum oxide. Propagation losses less than 5 dB/cm are achieved with the waveguides. The devices are fabricated using low-temperature CMOS compatible processes. We also demonstrate simple, compact and efficient strip-to-slot waveguide couplers. With a coupler as short as 10 µm, coupling loss is less than 0.15 dB. The low-index and low-nonlinearity filling material allows nonlinearities nearly two orders of magnitude smaller than in silicon waveguides. Therefore, these waveguides are a good candidate for linear photonic devices on the silicon platform, and for distortion-free signal transmission channels between different parts of a silicon all-optical chip. The low-nonlinearity slot waveguides and robust couplers also facilitate a 50-fold local change of the waveguide nonlinearity within the chip by a simple mask design.

  4. Coupler induced monopole component and its minimization in deflecting cavities

    Directory of Open Access Journals (Sweden)

    P. K. Ambattu

    2013-06-01

    Full Text Available Deflecting cavities are used in particle accelerators for the manipulation of charged particles by deflecting or crabbing (rotating them. For short deflectors, the effect of the power coupler on the deflecting field can become significant. The particular power coupler type can introduce multipole rf field components and coupler-specific wakefields. Coupler types that would normally be considered like standard on-cell coupler, waveguide coupler, or mode-launcher coupler could have one or two rf feeds. The major advantage of a dual-feed coupler is the absence of monopole and quadrupole rf field components in the deflecting structure. However, a dual-feed coupler is mechanically more complex than a typical single-feed coupler and needs a splitter. For most applications, deflecting structures are placed in regions where there is small space hence reducing the size of the structure is very desirable. This paper investigates the multipole field components of the deflecting mode in single-feed couplers and ways to overcome the effect of the monopole component on the beam. Significant advances in performance have been demonstrated. Additionally, a novel coupler design is introduced which has no monopole field component to the deflecting mode and is more compact than the conventional dual-feed coupler.

  5. The solution of singular optimal control problems using direct collocation and nonlinear programming

    Science.gov (United States)

    Downey, James R.; Conway, Bruce A.

    1992-08-01

    This paper describes work on the determination of optimal rocket trajectories which may include singular arcs. In recent years direct collocation and nonlinear programming has proven to be a powerful method for solving optimal control problems. Difficulties in the application of this method can occur if the problem is singular. Techniques exist for solving singular problems indirectly using the associated adjoint formulation. Unfortunately, the adjoints are not a part of the direct formulation. It is shown how adjoint information can be obtained from the direct method to allow the solution of singular problems.

  6. A Numerical Implementation of a Nonlinear Mild Slope Model for Shoaling Directional Waves

    Directory of Open Access Journals (Sweden)

    Justin R. Davis

    2014-02-01

    Full Text Available We describe the numerical implementation of a phase-resolving, nonlinear spectral model for shoaling directional waves over a mild sloping beach with straight parallel isobaths. The model accounts for non-linear, quadratic (triad wave interactions as well as shoaling and refraction. The model integrates the coupled, nonlinear hyperbolic evolution equations that describe the transformation of the complex Fourier amplitudes of the deep-water directional wave field. Because typical directional wave spectra (observed or produced by deep-water forecasting models such as WAVEWATCH III™ do not contain phase information, individual realizations are generated by associating a random phase to each Fourier mode. The approach provides a natural extension to the deep-water spectral wave models, and has the advantage of fully describing the shoaling wave stochastic process, i.e., the evolution of both the variance and higher order statistics (phase correlations, the latter related to the evolution of the wave shape. The numerical implementation (a Fortran 95/2003 code includes unidirectional (shore-perpendicular propagation as a special case. Interoperability, both with post-processing programs (e.g., MATLAB/Tecplot 360 and future model coupling (e.g., offshore wave conditions from WAVEWATCH III™, is promoted by using NetCDF-4/HD5 formatted output files. The capabilities of the model are demonstrated using a JONSWAP spectrum with a cos2s directional distribution, for shore-perpendicular and oblique propagation. The simulated wave transformation under combined shoaling, refraction and nonlinear interactions shows the expected generation of directional harmonics of the spectral peak and of infragravity (frequency <0.05 Hz waves. Current development efforts focus on analytic testing, development of additional physics modules essential for applications and validation with laboratory and field observations.

  7. Full-vectorial analysis of the directional couplers in vertical multiple-slotted silicon wires with trapezoidal cross-section%梯形截面硅基垂直多槽纳米线定向耦合器全矢量分析

    Institute of Scientific and Technical Information of China (English)

    肖金标; 李文亮; 夏赛赛; 孙小菡

    2012-01-01

    采用一种基于三电场分量的全矢量有限元法,其中引入了完善匹配层(PML)吸收边界条件,分析由梯形截面硅基垂直多槽纳米线构成的平行定向耦合器.考虑了波导侧壁倾角、耦合波导间距、槽宽及槽折射率的变化对定向耦合器性能的影响.给出了准TE与准TM偶、奇模有效折射率、耦合长度及模场分布,揭示了其模式的混合特性及模场分布特点.分析结果表明,恰当选择结构参数及材料参数,可实现两偏振态下相同耦合长度,定向耦合器在偏振无关条件下工作.%A directional coupler composed of two vertical multiple-slotted silicon wires with trapezoidal cross-section is characterized using a full-vectorial finite element method in terms of the electric fields, where the perfectly matched layer absorbing boundary conditions are adopted. The effects of the structural or material parameters including the sidewall angle , the gap between the coupled waveguides, and the width and index profiles in the slot regions on the behaviors of the directional coupler are taken into account. The effective indexes of the even and odd modes and the corresponding coupling length, both in quasi-TE and quasi-TM modes, are presented. The strongly-hybrid nature of the guided-modes is effectively demonstrated. The results show that polarization-independent directional couplers can be realized by properly choosing the structural and material parameters.

  8. Cooperative Output Regulation of Nonlinear Multiagent Systems under a General Directed Graph

    Directory of Open Access Journals (Sweden)

    Dingcai Huang

    2015-01-01

    Full Text Available This paper studies the cooperative output regulation problem for a class of nonlinear multiagent systems modeled by nonlinear dynamics under a general directed communication topology. A type of distributed internal model is introduced to convert the cooperative output regulation problem into a robust stabilization problem of a so-called augmented system. Based on the Lyapunov stability theorem and M-matrix theorem, a kind of distributed output feedback controller only using the relative outputs of neighboring agents together with its stability analysis is further proposed with the aid of the backstepping technology, under which the outputs of the followers will asymptotically converge to that of the leader if, for each follower, there exists at least a directed path from the leader to the follower. Finally, a numerical example is provided to illustrate the effectiveness of the analytic results.

  9. Nonlinear random resistor diode networks and fractal dimensions of directed percolation clusters.

    Science.gov (United States)

    Stenull, O; Janssen, H K

    2001-07-01

    We study nonlinear random resistor diode networks at the transition from the nonpercolating to the directed percolating phase. The resistor-like bonds and the diode-like bonds under forward bias voltage obey a generalized Ohm's law V approximately I(r). Based on general grounds such as symmetries and relevance we develop a field theoretic model. We focus on the average two-port resistance, which is governed at the transition by the resistance exponent straight phi(r). By employing renormalization group methods we calculate straight phi(r) for arbitrary r to one-loop order. Then we address the fractal dimensions characterizing directed percolation clusters. Via considering distinct values of the nonlinearity r, we determine the dimension of the red bonds, the chemical path, and the backbone to two-loop order.

  10. High power couplers for Project X

    Energy Technology Data Exchange (ETDEWEB)

    Kazakov, S.; Champion, M.S.; Yakovlev, V.P.; Kramp, M.; Pronitchev, O.; Orlov, Y.; /Fermilab

    2011-03-01

    Project X, a multi-megawatt proton source under development at Fermi National Accelerator Laboratory. The key element of the project is a superconducting (SC) 3GV continuous wave (CW) proton linac. The linac includes 5 types of SC accelerating cavities of two frequencies.(325 and 650MHz) The cavities consume up to 30 kW average RF power and need proper main couplers. Requirements and approach to the coupler design are discussed in the report. New cost effective schemes are described. Results of electrodynamics and thermal simulations are presented.

  11. Future Directions of Nonlinear Dynamics in PhysicaL and Biological Systems,

    Science.gov (United States)

    1992-01-01

    CHARGE DENSITY WAVES, POLARONIC SPIN DENSITY WAVES AND HIGH Tc SUPERCONDUCTIVITY Serge Aubry* CNLS, Los Alamos National Laboratory Los Alamos, NM 87545...300 Jim). MODEL AND BASIC PROPERTIES The laser dynamics is described by the Lang and Kobayashi equations4 for the Future Directions of Nonlinear...LT-4, 1655 (1986). 4. R. Lang , and K. Kobayashi, IEEE J. Quantum Electron. QE-16, 347 (1980). 5. J. Mork, M. Semkow, and B. Tromborg, Electron. Lett

  12. Correction of Frequency-Dependent Nonlinear Errors in Direct-Conversion Transceivers

    Science.gov (United States)

    2016-03-31

    University of Oklahoma Norman , Oklahoma, USA, 73019 pyraminxrox@ou.edu, fulton@ou.edu Abstract: Correction of nonlinear and frequency dependent...behavior of low -cost integrated transceivers, especially in the area of phased arrays, where many transceivers will be used to comprise the system as...analog RF portion of the receive chain of the low -cost, direct-conversion radar system initially presented in [2]. The spectral distortion seen here

  13. Direct heuristic dynamic programming for nonlinear tracking control with filtered tracking error.

    Science.gov (United States)

    Yang, Lei; Si, Jennie; Tsakalis, Konstantinos S; Rodriguez, Armando A

    2009-12-01

    This paper makes use of the direct heuristic dynamic programming design in a nonlinear tracking control setting with filtered tracking error. A Lyapunov stability approach is used for the stability analysis of the tracking system. It is shown that the closed-loop tracking error and the approximating neural network weight estimates retain the property of uniformly ultimate boundedness under the presence of neural network approximation error and bounded unknown disturbances under certain conditions.

  14. Nonlinear techniques for forecasting solar activity directly from its time series

    Science.gov (United States)

    Ashrafi, S.; Roszman, L.; Cooley, J.

    1993-01-01

    This paper presents numerical techniques for constructing nonlinear predictive models to forecast solar flux directly from its time series. This approach makes it possible to extract dynamical in variants of our system without reference to any underlying solar physics. We consider the dynamical evolution of solar activity in a reconstructed phase space that captures the attractor (strange), give a procedure for constructing a predictor of future solar activity, and discuss extraction of dynamical invariants such as Lyapunov exponents and attractor dimension.

  15. Direct adaptive control for nonlinear uncertain system based on control Lyapunov function method

    Institute of Scientific and Technical Information of China (English)

    Chen Yimei; Han Zhengzhi; Tang Houjun

    2006-01-01

    The problem of adaptive stabilization of a class of multi-input nonlinear systems with unknown parameters both in the state vector-field and the input vector-field has been considered. By employing the control Lyapunov function method, a direct adaptive controller is designed to complete the global adaptive stability of the uncertain system. At the same time, the controller is also verified to possess the optimality. Example and simulations are provided to illustrate the effectiveness of the proposed method.

  16. Modulation instability of dispersion-shifted fiber couplers

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yan-yong; JIA Wei-guo; HAN Ying-ming; YING Chun; BAO Hong-mei

    2008-01-01

    The nonlinear coupled-mode equations are rewritten by even and odd modes. We study modulation instability (MI) of dispersion-shifted fiber couplers when either even or odd mode is launched alone by using zero-dispersion waveleng threlatively long (quasi-cw) pulses. The result shows that there are new types of MI in both the normal-dispersion and the anomalous-dispersion regimes. MI is concerned with forth-order dispersion and has no relation with third-order dispersion.Quasi-cw can be changed into pulses array under certain conditions. We can extract super short pulse from this. Furthermore,the bandwidth of gain spectra widens and its strength accretes as the input power increases.

  17. An all fiber apparatus for microparticles selective manipulation based on a variable ratio coupler and a microfiber

    Science.gov (United States)

    Li, Baoli; Luo, Wei; Xu, Fei; Lu, Yanqing

    2016-09-01

    We propose an all fiber apparatus based on a variable ratio coupler which can transport microparticles controllably and trap particles one by one along a microfiber. By connecting two output ports of a variable ratio coupler with two end pigtails of a microfiber and launching a 980 nm laser into the variable ratio coupler, particles in suspension were trapped to the waist of microfiber due to a gradient force and then transported along the microfiber due to a total scattering force generated by two counter-propagating beams. The direction of transportation was controlled by altering the coupling ratio of the variable ratio coupler. When the intensities of two output ports were equivalent, trapped particles stayed at fixed positions. With time going, another particle around the micro fiber was trapped onto the microfiber. There were three particles trapped in total in our experiment. This technique combines with the function of conventional tweezers and optical conveyor.

  18. Miniaturized Bragg-grating couplers for SiN-photonic crystal slabs.

    Science.gov (United States)

    Barth, Carlo; Wolters, Janik; Schell, Andreas W; Probst, Jürgen; Schoengen, Max; Löchel, Bernd; Kowarik, Stefan; Benson, Oliver

    2015-04-20

    We report on an experimental and theoretical investigation of an integrated Bragg-like grating coupler for near-vertical scattering of light from photonic crystal waveguides with an ultra-small footprint of a few lattice constants only. Using frequency-resolved measurements, we find the directional properties of the scattered radiation and prove that the coupler shows a good performance over the complete photonic bandgap. The results compare well to analytical considerations regarding 1d-scattering phenomena as well as to FDTD simulations.

  19. Directed motion generated by heat bath nonlinearly driven by external noise

    Energy Technology Data Exchange (ETDEWEB)

    Chaudhuri, J Ray [Department of Physics, Katwa College, Katwa, Burdwan 713 130, West Bengal (India); Barik, D [Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700 032 (India); Banik, S K [Department of Physics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061-0435 (United States)

    2007-12-07

    Based on the heat bath system approach where the bath is nonlinearly modulated by an external Gaussian random force, we propose a new microscopic model to study directed motion in the overdamped limit for a nonequilibrium open system. Making use of the coupling between the heat bath and the external modulation as a small perturbation, we construct a Langevin equation with multiplicative noise- and space-dependent dissipation and the corresponding Fokker-Planck-Smoluchowski equation in the overdamped limit. We examine the thermodynamic consistency condition and explore the possibility of observing a phase-induced current as a consequence of state-dependent diffusion and, necessarily, nonlinear driving of the heat bath by the external noise.

  20. Distributed consensus tracking for multiple uncertain nonlinear strict-feedback systems under a directed graph.

    Science.gov (United States)

    Yoo, Sung Jin

    2013-04-01

    In this brief, we study the distributed consensus tracking control problem for multiple strict-feedback systems with unknown nonlinearities under a directed graph topology. It is assumed that the leader's output is time-varying and has been accessed by only a small fraction of followers in a group. The distributed dynamic surface design approach is proposed to design local consensus controllers in order to guarantee the consensus tracking between the followers and the leader. The function approximation technique using neural networks is employed to compensate unknown nonlinear terms induced from the controller design procedure. From the Lyapunov stability theorem, it is shown that the consensus errors are cooperatively semiglobally uniformly ultimately bounded and converge to an adjustable neighborhood of the origin.

  1. Asymptotic regulation of cascade systems with unknown control directions and nonlinear parameterization

    Institute of Scientific and Technical Information of China (English)

    Qiangde WANG; Chunling WEI; Yuqiang WU

    2009-01-01

    A robust partial-state feedback asymptotic regulating control scheme is developed for a class of cascade systems with both nonlinear uncertainties and unknown control directions.A parameter separation technique is introduced to separate the time-varying uncertainty and the unmeasurable state from nonlinear functions.Then,the Nussbaum-type gain method together with the idea of changing supply functions is adopted in the design of a smooth partial-state regulator that can ensure all the signals of the closed-loop system are globally uniformly bounded.Especially,the system state asymptotically converges to zero.The design procedure is illustrated through an example and the simulation results show that the controller is feasible and effective.

  2. Direct adaptive control for a class of MIMO nonlinear discrete-time systems

    Institute of Scientific and Technical Information of China (English)

    Lei Li; Zhizhong Mao

    2014-01-01

    This paper considers the problem of adaptive con-trol for a class of multiple input multiple output (MIMO) nonlinear discrete-time systems based on input-output model with unknown interconnections between subsystems. Based on the Taylor ex-pand technology, an equivalent model in affine-like form is derived for the original nonaffine nonlinear system. Then a direct adap-tive neural network (NN) control er is implemented based on the affine-like model. By finding an orthogonal matrix to tune the NN weights, the closed-loop system is proven to be semiglobal y uni-formly ultimately bounded. The σ-modification technique is used to remove the requirement of persistence excitation during the adaptation. The control performance of the closed-loop system is guaranteed by suitably choosing the design parameters.

  3. Coupler design for an L-band electron linac

    Institute of Scientific and Technical Information of China (English)

    ZHAO Wei; TANG Xiao; SHI Rong-Jian; HOU Mi

    2012-01-01

    The RF coupler is a key component for an accelerating structure which is the most important component for a linac.In order to feed microwave power into the accelerating cavities effectively,the coupler has to be well matched with the feeding waveguide.In this paper,an electron linac coupler was designed,constructed and tested.A numerical simulation method based on the Kyhl's method was employed to search for the optimal dimensions of the coupler.The frequency and the coupling coefficient as a function of the coupler dimensions were also calculated.The results fitted the Kyhl's method simulation results well and gave tolerances of the coupler.The coupler was brazed to the accelerating cavities and it was cold-tested and hot-tested.The experimental results were consistent with the numerical simulation results.

  4. The Effect of Foreign Direct Investment in Economic Growth from the Perspective of Nonlinear Dynamics

    Directory of Open Access Journals (Sweden)

    Ch. K. Volos

    2015-09-01

    Full Text Available In today’s globalized economy one of the most crucial factors for the economic growth of a country, especially of a developing country, is the foreign direct investment, not only because of the transfer of capital but also of technology. In this work, the effect of foreign direct investments in a county’s economic growth by using tools of nonlinear dynamics is studied. As a model of the economic growth of a country, a well-known nonlinear discrete-time dynamical system, the Logistic map, is used. The system under study consists of two countries with a strong economic relationship. The source country of foreign direct investments is an industrialized, economically powerful and technologically advanced country that makes significant investments in the host country, which is a developing country and strong dependent from the source country. Simulation results of system’s behavior and especially the bifurcation diagrams reveal the strong connection between the countries of the proposed system and the effect of foreign direct investments in the economic growth of the host country.

  5. Direct method of solving finite difference nonlinear equations for multicomponent diffusion in a gas centrifuge

    Energy Technology Data Exchange (ETDEWEB)

    Potemki, Valeri G. [Moscow State Engineering Physics Institute (Technical University), Moscow (Russian Federation). Dept. of Automatics and Electronics; Borisevich, Valentine D.; Yupatov, Sergei V. [Moscow State Enineering Physics Institute (Technical University), Moscow (Russian Federation). Dept. of Technical Physics

    1996-12-31

    This paper describes the the next evolution step in development of the direct method for solving systems of Nonlinear Algebraic Equations (SNAE). These equations arise from the finite difference approximation of original nonlinear partial differential equations (PDE). This method has been extended on the SNAE with three variables. The solving SNAE bases on Reiterating General Singular Value Decomposition of rectangular matrix pencils (RGSVD-algorithm). In contrast to the computer algebra algorithm in integer arithmetic based on the reduction to the Groebner`s basis that algorithm is working in floating point arithmetic and realizes the reduction to the Kronecker`s form. The possibilities of the method are illustrated on the example of solving the one-dimensional diffusion equation for 3-component model isotope mixture in a ga centrifuge. The implicit scheme for the finite difference equations without simplifying the nonlinear properties of the original equations is realized. The technique offered provides convergence to the solution for the single run. The Toolbox SNAE is developed in the framework of the high performance numeric computation and visualization software MATLAB. It includes more than 30 modules in MATLAB language for solving SNAE with two and three variables. (author) 7 refs., 10 figs.

  6. Combined indirect and direct method for adaptive fuzzy output feedback control of nonlinear system

    Institute of Scientific and Technical Information of China (English)

    Ding Quanxin; Chen Haitong; Jiang Changsheng; Chen Zongji

    2007-01-01

    A novel control method for a general class of nonlinear systems using fuzzy logic systems (FLSs) is presertted.Indirect and direct methods are combined to design the adaptive fuzzy output feedback controller and a high-gain observer is used to estimate the derivatives of the system output. The closed-loop system is proven to be semiglobally uniformly ultimately bounded. In addition, it is shown that if the approximation accuracy of the fuzzy logic system is high enough and the observer gain is chosen sufficiently large, an arbitrarily small tracking error can be achieved. Simulation results verify the effectiveness of the newly designed scheme and the theoretical discussion.

  7. Transverse emittance dilution due to coupler kicks in linear accelerators

    Directory of Open Access Journals (Sweden)

    Brandon Buckley

    2007-11-01

    Full Text Available One of the main concerns in the design of low emittance linear accelerators (linacs is the preservation of beam emittance. Here we discuss one possible source of emittance dilution, the coupler kick, due to transverse electromagnetic fields in the accelerating cavities of the linac caused by the power coupler geometry. In addition to emittance growth, the coupler kick also produces orbit distortions. It is common wisdom that emittance growth from coupler kicks can be strongly reduced by using two couplers per cavity mounted opposite each other or by having the couplers of successive cavities alternate from above to below the beam pipe so as to cancel each individual kick. While this is correct, including two couplers per cavity or alternating the coupler location requires large technical changes and increased cost for superconducting cryomodules where cryogenic pipes are arranged parallel to a string of several cavities. We therefore analyze consequences of alternate coupler placements. We show here that alternating the coupler location from above to below compensates the emittance growth as well as the orbit distortions. For sufficiently large Q values, alternating the coupler location from before to after the cavity leads to a cancellation of the orbit distortion but not of the emittance growth, whereas alternating the coupler location from before and above to behind and below the cavity cancels the emittance growth but not the orbit distortion. We show that cancellations hold for sufficiently large Q values. These compensations hold even when each cavity is individually detuned, e.g., by microphonics. Another effective method for reducing coupler kicks that is studied is the optimization of the phase of the coupler kick so as to minimize the effects on emittance from each coupler. This technique is independent of the coupler geometry but relies on operating on crest. A final technique studied is symmetrization of the cavity geometry in the

  8. Coupler rotation behaviour and its effect on heavy haul trains

    Science.gov (United States)

    Xu, Z. Q.; Ma, W. H.; Wu, Q.; Luo, S. H.

    2013-12-01

    When a locomotive coupler rotates at an angle, the lateral component of the coupler force has an adverse effect on the locomotive's safety, particularly in heavy haul trains. In this paper, a model of a head-mid configuration, a 20,000-t heavy haul train is developed to analyse the rotation behaviour of the locomotive's coupler system and its effect on the dynamic behaviour of such a train's middle locomotive when operating on tangent and curved tracks. The train model includes detailed coupler and draft gear with which to consider the hysteretic characteristics of the rubber draft gear model, the friction characteristics of the coupler knuckles, and the alignment-control characteristics of the coupler shoulder. The results indicate that the coupler's rotation behaviour differs between the tangent and curved tracks, significantly affecting the locomotive's running performance under the braking condition. A larger coupler rotation angle generates a larger lateral component, which increases the wheelset's lateral force and the derailment coefficient. Decreasing the maximum coupler free angle can improve the locomotive's operational performance and safety. Based on these results, the recommended maximum coupler free angle is 4°.

  9. Multiwavelength mode-locked cylindrical vector beam fiber laser based on mode selective coupler

    Science.gov (United States)

    Huang, Ping; Cai, Yu; Wang, Jie; Wan, Hongdan; Zhang, Zuxing; Zhang, Lin

    2017-10-01

    We propose and demonstrate a multiwavelength mode-locked fiber laser with cylindrical vector beam generation for the first time, to the best of our knowledge. The mode-locking mechanism is based on a nonlinear polarization rotation effect in fiber, and the multiwavelength operation is contributed to by an in-line birefringence fiber filter with periodic multiple passbands, formed by incorporating a section of polarization maintaining fiber into the laser cavity with a fiber polarizer. Furthermore, by using a home-made mode selective coupler, which acts as both a mode converter from fundamental mode to higher-order mode and an output coupler, multiwavelength mode-locked cylindrical vector beams have been obtained. This may have potential applications in mode-division multiplexing optical fiber communication and material processing.

  10. HOM Couplers for CERN SPL Cavities

    CERN Document Server

    Papke, Kai; Van Rienen, U

    2013-01-01

    Higher-Order-Modes (HOMs) may affect beam stability and refrigeration requirements of superconducting proton linacs such as the SPL, which is studied at CERN as the driver for future neutrino facilities. In order to limit beam-induced HOM effects, CERN considers the use of HOM couplers on the cut-off tubes of the 5-cell superconducting cavities. These couplers consist of resonant antennas shaped as loops or probes, which are designed to couple to modes of a specific frequency range. In this paper the design process is presented and a comparison is made between various design options for the medium and high-beta SPL cavities, both operating at 704.4 MHz. The RF characteristics and thermal behaviour of the various designs are discussed.

  11. MICROSTRIP COUPLER DESIGN USING BAT ALGORITHM

    Directory of Open Access Journals (Sweden)

    EzgiDeniz Ulker

    2014-01-01

    Full Text Available Evolutionary and swarm algorithms have found many applications in design problems since todays computing power enables these algorithms to find solutions to complicated design problems very fast. Newly proposed hybridalgorithm, bat algorithm, has been applied for the design of microwave microstrip couplers for the first time. Simulation results indicate that the bat algorithm is a very fast algorithm and it produces very reliable results.

  12. Mid-IR fused fiber couplers

    Science.gov (United States)

    Stevens, G.; Woodbridge, T.

    2016-03-01

    We present results from our recent efforts on developing single-mode fused couplers in ZBLAN fibre. We have developed a custom fusion workstation for working with lower melting temperature fibres, such as ZBLAN and chalcogenide fibres. Our workstation uses a precisely controlled electrical heater designed to operate at temperatures between 100 - 250°C as our heat source. The heated region of the fibers was also placed in an inert atmosphere to avoid the formation of microcrystal inclusions during fusion. We firstly developed a process for pulling adiabatic tapers in 6/125 μm ZBLAN fibre. The tapers were measured actively during manufacture using a 2000 nm source. The process was automated so that the heater temperature and motor speed automatically adjusted to pull the taper at constant tension. This process was then further developed so that we could fuse and draw two parallel 6/125 μm ZBLAN fibres, forming a single-mode coupler. Low ratio couplers (1-10%) that could be used as power monitors were manufactured that had an excess loss of 0.76 dB. We have also manufactured 50/50 splitters and wavelength division multiplexers (WDMs). However, the excess loss of these devices was typically 2 - 3 dB. The increased losses were due to localised necking and surface defects forming as the tapers were pulled further to achieve a greater coupling ratio. Initial experiments with chalcogenide fibre have shown that our process can be readily adapted for chalcogenide fibres. A 5% coupler with 1.5 dB insertion loss was manufactured using commercial of the shelf (COTS) fibres.

  13. Kernel Model Applied in Kernel Direct Discriminant Analysis for the Recognition of Face with Nonlinear Variations

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A kernel-based discriminant analysis method called kernel direct discriminant analysis is employed, which combines the merit of direct linear discriminant analysis with that of kernel trick. In order to demonstrate its better robustness to the complex and nonlinear variations of real face images, such as illumination, facial expression, scale and pose variations, experiments are carried out on the Olivetti Research Laboratory, Yale and self-built face databases. The results indicate that in contrast to kernel principal component analysis and kernel linear discriminant analysis, the method can achieve lower (7%) error rate using only a very small set of features. Furthermore, a new corrected kernel model is proposed to improve the recognition performance. Experimental results confirm its superiority (1% in terms of recognition rate) to other polynomial kernel models.

  14. Adaptive Consensus Control of Nonlinear Multiagent Systems With Unknown Control Directions Under Stochastic Topologies.

    Science.gov (United States)

    Rezaee, Hamed; Abdollahi, Farzaneh

    2017-08-15

    The consensus problem over high-order nonlinear multiagent systems with the Brunovsky-type model is studied. The model parameters and control directions of agents are supposed to be unknown. Hence, based on Nussbaum-type functions, an adaptive protocol is proposed, which guarantees achieving consensus in the network when the parameters and control directions of the agents are unknown and unidentical. The main contribution of this paper (compared with the existing similar results in the literature) is to guarantee achieving consensus in networks of agents when the communication topology is not connected constantly, and communication links stochastically switch over time. It is shown that if the probability of the network connectivity is not zero, under some conditions, almost sure consensus can be achieved. Illustrative examples verify the accuracy of the proposed consensus protocol.

  15. Nonlinear mechanics of thin-walled structures asymptotics, direct approach and numerical analysis

    CERN Document Server

    Vetyukov, Yury

    2014-01-01

    This book presents a hybrid approach to the mechanics of thin bodies. Classical theories of rods, plates and shells with constrained shear are based on asymptotic splitting of the equations and boundary conditions of three-dimensional elasticity. The asymptotic solutions become accurate as the thickness decreases, and the three-dimensional fields of stresses and displacements can be determined. The analysis includes practically important effects of electromechanical coupling and material inhomogeneity. The extension to the geometrically nonlinear range uses the direct approach based on the principle of virtual work. Vibrations and buckling of pre-stressed structures are studied with the help of linearized incremental formulations, and direct tensor calculus rounds out the list of analytical techniques used throughout the book. A novel theory of thin-walled rods of open profile is subsequently developed from the models of rods and shells, and traditionally applied equations are proven to be asymptotically exa...

  16. Low Cost Star Couplers For Automotive Applications

    Science.gov (United States)

    Sriram, S.; Boiarski, A. A.

    1989-02-01

    Within the next 5 to 10 years optical fibers are expected to be used in automobile local area networks. For this application, both glass and plastic fibers have the potential to play a significant role. Under the hood, where the operating temperatures tend to be too high for plastic fibers, glass based fibers are likely to be used. Glass based fibers are also intended for use in fiber optic sensors, for example, in engine control systems. However, in general, the preferred fiber material is plastic due to economic considerations. In the case of optical fibers for a network within the passenger compartment, plastic optical fibers are adequate and several prototype systems have already been built and demonstrated. The principal reasons for considering the use of optical fibers are discussed in several papers (1-3). A key component in an optical fiber network is a star coupler. This paper will deal with the fabrication and test results of a prototype 7x7 transmissive star coupler developed at Battelle. The optical fiber diameter chosen for the development of the star coupler is a 1 mm diameter fiber manufactured by Mitsubishi (ESKA-40). Currently both 750 and 1000 micron diameter fibers are under consideration for the automobile but the technology reported here is capable of accommodating either fiber. The final choice of the fiber type will depend on several economic factors which are yet unknown.

  17. RF Processing of the Couplers for the SNS Superconducting Cavities

    Energy Technology Data Exchange (ETDEWEB)

    Y.Kang; I.E. Campisi; D. Stout; A. Vassioutchenko; M. Stirbet; M. Drury; T. Powers

    2005-07-10

    All eighty-one fundamental power couplers for the 805 MHz superconducting cavities of the SNS linac have been RF conditioned and installed in the cryomodules successfully. The couplers were RF processed at JLAB or at the SNS in ORNL: more than forty couplers have been RF conditioned in the SNS RF Test Facility (RFTF) after the first forty couplers were conditioned at JLAB. The couplers were conditioned up to 650 kW forward power at 8% duty cycle in traveling and standing waves. They were installed on the cavities in the cryomodules and then assembled with the airside waveguide transitions. The couplers have been high power RF tested with satisfactory accelerating field gradients in the cooled cavities.

  18. Silica-on-silicon optical couplers and coupler based optical filters

    DEFF Research Database (Denmark)

    Leick, Lasse

    2002-01-01

    This work concerns modeling and chracterization of non ampligying silica-on-silicon optical components for wavelength division mulitplexed networks. Emphasis is placed on optical couplers and how they can be used as building blocks for devices with a larger complexity. It has been investigated how...... mode interference couplers have superior proces tolerance. The measured characteristics of mulit mode interference couplers deviate from the simulations, showing an unexpected imbalance and large polarization sensitivity. This can be explained by a sligthly non-uniform index distribution across...... penalty. The dispersion can be removed by adding a three-stage all-pass filter on the input arm. The above mentioned silica-on-silicon components have been fabricated using a conventional method where the waveguides are defined and fabricated using cleanroom processing. Waveguides can also be fabricated...

  19. Coaxial HOM coupler for the 500 MHz RF damped cavity

    CERN Document Server

    Koseki, T; Takahashi, T; Kamiya, Yu; Satoh, K; Ogata, H

    2001-01-01

    We have developed a new higher-order modes (HOMs) coupler of coaxial waveguide type for the 500 MHz damped cavity. An SiC ceramics is adopted as microwave absorber. Two prototype models of the HOM coupler have been fabricated and tested. The detailed design of the coupler is described in this paper. The results of RF characteristics measurement and high power conditioning are also presented.

  20. Robust control methods for nonlinear systems with uncertain dynamics and unknown control direction

    Science.gov (United States)

    Ton, Chau T.

    Robust nonlinear control design strategies using sliding mode control (SMC) and integral SMC (ISMC) are developed, which are capable of achieving reliable and accurate tracking control for systems containing dynamic uncertainty, unmodeled disturbances, and actuator anomalies that result in an unknown and time-varying control direction. In order to ease readability of this dissertation, detailed explanations of the relevant mathematical tools is provided, including stability denitions, Lyapunov-based stability analysis methods, SMC and ISMC fundamentals, and other basic nonlinear control tools. The contributions of the dissertation are three novel control algorithms for three different classes of nonlinear systems: single-input multipleoutput (SIMO) systems, systems with model uncertainty and bounded disturbances, and systems with unknown control direction. Control design for SIMO systems is challenging due to the fact that such systems have fewer actuators than degrees of freedom to control (i.e., they are underactuated systems). While traditional nonlinear control methods can be utilized to design controllers for certain classes of cascaded underactuated systems, more advanced methods are required to develop controllers for parallel systems, which are not in a cascade structure. A novel control technique is proposed in this dissertation, which is shown to achieve asymptotic tracking for dual parallel systems, where a single scalar control input directly aects two subsystems. The result is achieved through an innovative sequential control design algorithm, whereby one of the subsystems is indirectly stabilized via the desired state trajectory that is commanded to the other subsystem. The SIMO system under consideration does not contain uncertainty or disturbances. In dealing with systems containing uncertainty in the dynamic model, a particularly challenging situation occurs when uncertainty exists in the input-multiplicative gain matrix. Moreover, special

  1. Optimization of unipolar magnetic couplers for EV wireless power chargers

    Science.gov (United States)

    Zeng, H.; Liu, Z. Z.; Chen, H. X.; Zhou, B.; Hei, T.

    2016-08-01

    In order to improve the coupling coefficient of EV wireless power chargers, it's important to optimize the magnetic couplers. To improve the coupling coefficient, the relationship between coupling coefficient and efficiency is derived, and the expression of coupling coefficient based on magnetic circuit is deduced, which provide the basis for optimizing the couplers. By 3D FEM simulation, the optimal core structure and coils are designed for unipolar circular couplers. Experiments are designed to verify the correctness of the optimization results, and compared with previous coupler, the transmission efficiency is improved and weight is reduced.

  2. Nonlinear chiro-optical amplification by plasmonic nanolens arrays formed via directed assembly of gold nanoparticles.

    Science.gov (United States)

    Biswas, Sushmita; Liu, Xiaoying; Jarrett, Jeremy W; Brown, Dean; Pustovit, Vitaliy; Urbas, Augustine; Knappenberger, Kenneth L; Nealey, Paul F; Vaia, Richard A

    2015-03-11

    Metal nanoparticle assemblies are promising materials for nanophotonic applications due to novel linear and nonlinear optical properties arising from their plasmon modes. However, scalable fabrication approaches that provide both precision nano- and macroarchitectures, and performance commensurate with design and model predictions, have been limiting. Herein, we demonstrate controlled and efficient nanofocusing of the fundamental and second harmonic frequencies of incident linearly and circularly polarized light using reduced symmetry gold nanoparticle dimers formed by surface-directed assembly of colloidal nanoparticles. Large ordered arrays (>100) of these C∞v heterodimers (ratio of radii R1/R2 = 150 nm/50 nm = 3; gap distance l = 1 ± 0.5 nm) exhibit second harmonic generation and structure-dependent chiro-optic activity with the circular dichroism ratio of individual heterodimers varying less than 20% across the array, demonstrating precision and uniformity at a large scale. These nonlinear optical properties were mediated by interparticle plasmon coupling. Additionally, the versatility of the fabrication is demonstrated on a variety of substrates including flexible polymers. Numerical simulations guide architecture design as well as validating the experimental results, thus confirming the ability to optimize second harmonic yield and induce chiro-optical responses for compact sensors, optical modulators, and tunable light sources by rational design and fabrication of the nanostructures.

  3. All-optical switching in a symmetric three-waveguide coupler with phase-mismatched absorptive central waveguide.

    Science.gov (United States)

    Chen, Yijing; Ho, Seng-Tiong; Krishnamurthy, Vivek

    2013-12-20

    All-optical switching operation based on manipulation of absorption in a three-waveguide directional coupler is theoretically investigated. The proposed structure consists of one absorptive central waveguide and two identical passive side waveguides. Optically induced absorption change in the central waveguide effectively controls the coupling of light between the two side waveguides, leading to optical switching action. The proposed architecture alleviates the fabrication challenges and waveguide index matching conditions that limit previous demonstrations of similar switching schemes based on a two-waveguide directional coupler. The proposed device accommodates large modal index difference between absorptive and passive waveguides without compromising the switching extinction ratio.

  4. Conceptual SPL RF Main Power Coupler design

    CERN Document Server

    Montesinos, Eric

    2011-01-01

    While the upgrade plans of the LHC injectors had to be reduced in scope in 2010, the Superconducting Proton Linac (SPL) remains a fundamental element of plans for a possible future neutrino facility. Prototyping work is therefore continuing at CERN and the current focus is on the test of a first four cavity SPL-like cryomodule with full power. This report summarizes the parameters for the Main Power Coupler design as discussed and approved within the ‘Review of SPL RF power couplers’, held at CERN in March 2010.

  5. Broadband directional coupling in aluminum nitride nanophotonic circuits

    CERN Document Server

    Stegmaier, Matthias

    2013-01-01

    Aluminum nitride (AlN)-on-insulator has emerged as a promising platform for the realization of linear and non-linear integrated photonic circuits. In order to efficiently route optical signals on-chip, precise control over the interaction and polarization of evanescently coupled waveguide modes is required. Here we employ nanophotonic AlN waveguides to realize directional couplers with a broad coupling bandwidth and low insertion loss. We achieve uniform splitting of incoming modes, confirmed by high extinction-ratio exceeding 33dB in integrated Mach-Zehnder Interferometers. Optimized three-waveguide couplers furthermore allow for extending the coupling bandwidth over traditional side-coupled devices by almost an order of magnitude, with variable splitting ratio. Our work illustrates the potential of AlN circuits for coupled waveguide optics, DWDM applications and integrated polarization diversity schemes.

  6. Directional asymmetry of the nonlinear wave phenomena in a three-dimensional granular phononic crystal under gravity.

    Science.gov (United States)

    Merkel, A; Tournat, V; Gusev, V

    2014-08-01

    We report the experimental observation of the gravity-induced asymmetry for the nonlinear transformation of acoustic waves in a noncohesive granular phononic crystal. Because of the gravity, the contact precompression increases with depth inducing space variations of not only the linear and nonlinear elastic moduli but also of the acoustic wave dissipation. We show experimentally and explain theoretically that, in contrast to symmetric propagation of linear waves, the amplitude of the nonlinearly self-demodulated wave depends on whether the propagation of the waves is in the direction of the gravity or in the opposite direction. Among the observed nonlinear processes, we report frequency mixing of the two transverse-rotational modes belonging to the optical band of vibrations and propagating with negative phase velocities, which results in the excitation of a longitudinal wave belonging to the acoustic band of vibrations and propagating with positive phase velocity. We show that the measurements of the gravity-induced asymmetry in the nonlinear acoustic phenomena can be used to compare the in-depth distributions of the contact nonlinearity and of acoustic absorption.

  7. Acoustic Coupler for the Acquisition of Coronary Artery Murmurs

    DEFF Research Database (Denmark)

    Zimmermann, Niels Henrik; Schmidt, Samuel; Hansen, John

    The weak murmurs originating from stenosis in the coronary arteries can only be acquired with a dedicated coupler and system design. The aim of the study was to design and evaluate such a coupler. The suggested design is based on the use of a high quality microphone, coupled to the chest through...... that the sensor is suitable for recording of coronary murmurs....

  8. Three-dimensional effects in directional solidification in hele-shaw cells: nonlinear evolution and pattern selection

    Science.gov (United States)

    Ajaev; Davis

    2000-02-01

    Directional solidification of a dilute binary alloy in a Hele-Shaw cell is modeled by a long-wave nonlinear evolution equation with zero flux and contact-angle conditions at the walls. The basic steady-state solution and its linear stability criteria are found analytically, and the nonlinear system is solved numerically. Concave-down (toward the solid) interfaces under physically realistic conditions are found to be more unstable than the planar front. Weakly nonlinear analysis indicates that subcritical bifurcation is promoted, the domain of modulational instability is expanded and transition to three-dimensional patterns is delayed due to the contact-angle condition. In the strongly nonlinear regime fully three-dimensional steady-state solutions are found whose characteristic amplitude is larger than that for the two-dimensional problem. In the subcritical regime secondary bifurcation to stable solutions is promoted.

  9. Design of shape memory alloy pipe couplers: modeling and experiments

    Science.gov (United States)

    Tabesh, Majid; Atli, Kadri C.; Rohmer, John; Franco, Brian E.; Karaman, Ibrahim; Boyd, James G.; Lagoudas, Dimitris C.

    2012-04-01

    Shape memory alloy (SMA) pipe couplers use the shape memory effect to apply a contact pressure onto the surface of the pipes to be coupled. In the current research, a SMA pipe coupler is designed, fabricated and tested. The thermally induced contact pressure depends on several factors such as the dimensions and properties of the coupler-pipe system. Two alloy systems are considered: commercially-available NiTiNb couplers and in-house developed NiTi couplers. The coupling pressure is measured using strain gages mounted on the internal surface of an elastic ring. An axisymmetric finite element model including SMA constitutive equations is also developed, and the finite element results are compared with the experimental results.

  10. Event-triggered nonlinear consensus in directed multi-agent systems with combinational state measurements

    Science.gov (United States)

    Li, Huaqing; Chen, Guo; Xiao, Li

    2016-10-01

    Event-triggered sampling control is motivated by the applications of embedded microprocessors equipped in the agents with limited computation and storage resources. This paper studied global consensus in multi-agent systems with inherent nonlinear dynamics on general directed networks using decentralised event-triggered strategy. For each agent, the controller updates are event-based and only triggered at its own event times by only utilising the locally current sampling data. A high-performance sampling event that only needs local neighbours' states at their own discrete time instants is presented. Furthermore, we introduce two kinds of general algebraic connectivity for strongly connected networks and strongly connected components of the directed network containing a spanning tree so as to describe the system's ability for reaching consensus. A detailed theoretical analysis on consensus is performed and two criteria are derived by virtue of algebraic graph theory, matrix theory and Lyapunov control approach. It is shown that the Zeno behaviour of triggering time sequence is excluded during the system's whole working process. A numerical simulation is given to show the effectiveness of the theoretical results.

  11. Determination of nonlinear absorption and refraction in direct and indirect band gap crystals by Z-scan method.

    Science.gov (United States)

    Gaur, Poonam; Sharma, Dimple; Singh, Nageshwar; Malik, B P; Gaur, Arun

    2012-11-01

    A systematic investigation on nonlinear optical properties such as three photon absorption (3PA) wavelength dependent of Kerr type nonlinear refraction in direct and indirect band gap crystals has been reported in the present work. The Z-scan measurements are recorded for both ZnO and CdI(2) with femtosecond laser pulses while the wavelength dependent of the Kerr nonlinearity are in agreement with a two band model. The wavelength dependence of the 3PA is determined by [(3E(photon)/E(g))-1](5/2)[(3E(photon)/E(g))](-9) in the case of direct band gap crystal and [(3E(photon)±ℏΩ/E(g))-1](5/2)[(3E(photon)±ℏΩ/E(g))](-9) in the case of indirect band gap crystal. In the present investigation the value of 3PA in the case of indirect band gap crystal is lower than the direct band gap crystal which is due to the phonon assisted transition. The materials of large band gap with optical nonlinearity and fast response speed should be dominating factor for further photonic devices such as optical limiters, optical switches and optical modulators. The higher order nonlinear optical effects have also been determined in the present study. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Spectral evolution of weakly nonlinear random waves: kinetic description vs direct numerical simulations

    Science.gov (United States)

    Annenkov, Sergei; Shrira, Victor

    2016-04-01

    We study numerically the long-term evolution of water wave spectra without wind forcing, using three different models, aiming at understanding the role of different sets of assumptions. The first model is the classical Hasselmann kinetic equation (KE). We employ the WRT code kindly provided by G. van Vledder. Two other models are new. As the second model, we use the generalised kinetic equation (gKE), derived without the assumption of quasi-stationarity. Thus, unlike the KE, the gKE is valid in the cases when a wave spectrum is changing rapidly (e.g. at the initial stage of evolution of a narrow spectrum). However, the gKE employs the same statistical closure as the KE. The third model is based on the Zakharov integrodifferential equation for water waves and does not depend on any statistical assumptions. Since the Zakharov equation plays the role of the primitive equation of the theory of wave turbulence, we refer to this model as direct numerical simulation of spectral evolution (DNS-ZE). For initial conditions, we choose two narrow-banded spectra with the same frequency distribution (a JONSWAP spectrum with high peakedness γ = 6) and different degrees of directionality. These spectra are from the set of observations collected in a directional wave tank by Onorato et al (2009). Spectrum A is very narrow in angle (corresponding to N = 840 in the cosN directional model). Spectrum B is initially wider in angle (corresponds to N = 24). Short-term evolution of both spectra (O(102) wave periods) has been studied numerically by Xiao et al (2013) using two other approaches (broad-band modified nonlinear Schrödinger equation and direct numerical simulation based on the high-order spectral method). We use these results to verify the initial stage of our DNS-ZE simulations. However, the advantage of the DNS-ZE method is that it allows to study long-term spectral evolution (up to O(104) periods), which was previously possible only with the KE. In the short-term evolution

  13. In-situ characterization of spurious modes in HE11 transmission lines with a 5-port coupler

    Directory of Open Access Journals (Sweden)

    Tretiak D.

    2012-09-01

    Full Text Available Real-time in-situ measurement of spurious modes in HE11 transmission lines is becoming an important topic for the design of next-generation ECRH installations (e.g. ITER, because the acceptable tolerances for the alignment of the waveguides and coupling optics are small for oversized waveguides. Also, the effects of spurious modes (ohmic heating, wrong beam parameters at the launcher become increasingly critical. We present a method for in-situ characterization of 4 dominant spurious modes by using a 5-port coupler, which is integrated into a miter bend. The coupler signals can be directly transformed into the mode spectrum by a matrix multiplication. A general formalism for obtaining the coefficients of the transformation matrix is presented along with a method for optimizing the coupler positions in order to obtain the maximum dynamic range for the diagnostics.

  14. Direct approach for solving nonlinear evolution and two-point boundary value problems

    Indian Academy of Sciences (India)

    Jonu Lee; Rathinasamy Sakthivel

    2013-12-01

    Time-delayed nonlinear evolution equations and boundary value problems have a wide range of applications in science and engineering. In this paper, we implement the differential transform method to solve the nonlinear delay differential equation and boundary value problems. Also, we present some numerical examples including time-delayed nonlinear Burgers equation to illustrate the validity and the great potential of the differential transform method. Numerical experiments demonstrate the use and computational efficiency of the method. This method can easily be applied to many nonlinear problems and is capable of reducing the size of computational work.

  15. High temperature superconducting axial field magnetic coupler: realization and test

    Science.gov (United States)

    Belguerras, L.; Mezani, S.; Lubin, T.; Lévêque, J.; Rezzoug, A.

    2015-09-01

    Contactless torque transmission through a large airgap is required in some industrial applications in which hermetic isolation is necessary. This torque transmission usually uses magnetic couplers, whose dimension strongly depends on the airgap flux density. The use of high temperature superconducting (HTS) coils to create a strong magnetic field may constitute a solution to reduce the size of the coupler. It is also possible to use this coupler to replace a torque tube in transmitting the torque produced by a HTS motor to its load. This paper presents the detailed construction and tests of an axial field HTS magnetic coupler. Pancake coils have been manufactured from BSCCO tape and used in one rotor of the coupler. The second rotor is mainly composed of NdFeB permanent magnets. Several tests have been carried out showing that the constructed coupler is working properly. A 3D finite element (FE) model of the studied coupler has been developed. Airgap magnetic field and torque measurements have been carried out and compared to the FE results. It has been shown that the measured and the computed quantities are in satisfactory agreement.

  16. An RF input coupler for a superconducting single cell cavity

    Energy Technology Data Exchange (ETDEWEB)

    Fechner, B.; Ouchi, Nobuo; Kusano, Joichi; Mizumoto, Motoharu; Mukugi, Ken [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Krawczyk, F.

    1999-03-01

    Japan Atomic Energy Research Institute proposes a high intensity proton accelerator for the Neutron Science Project. A superconducting linac is a main option for the high energy part of the accelerator. Design and development work for the superconducting accelerating cavities (resonant frequency of 600 MHz) is in progress. Superconducting cavities have an advantage of very high accelerating efficiency because RF wall loss is very small and much of the RF power fed to the cavity is consumed for the beam acceleration. On the other hand, an RF input coupler for the superconducting cavity has to be matched to the beam loading. Therefore, estimation of coupling coefficient or external quality factor (Qext) of the RF input coupler is important for the design of the couplers. In this work, Qext`s were calculated by the electromagnetic analysis code (MAFIA) and were compared with those by the measurements. A {beta} (ratio of the particle velocity to the light velocity) = 0.5 single-cell cavity with either axial coupler or side coupler was used in this work. In the experiments, a model cavity made by copper is applied. Both 2- and 3-dimensional calculations were performed in the axial coupler geometry and the results were compared. The agreements between calculated and measured values are good and this method for calculation of Qext is confirmed to be proper for the design of the RF input couplers. (author)

  17. Fundamental Research to Support Direct Phase-Resolved Simulation of Nonlinear Ocean Wavefield Evolution

    Science.gov (United States)

    2013-11-18

    capability to realistic ocean environments. REFERENCES 1. Dysthe, K.B. 1979 Note on a modification to the nonlinear schrodinger equation for...wave turbulence. Phy. Rev. Lett. 98, 94503. 3. Trulsen,K.and Dysthe,K.B. 1996 A modified nonlinear Schrodinger equation for broader bandwidth

  18. Optimized Ultrawideband and Uniplanar Minkowski Fractal Branch Line Coupler

    Directory of Open Access Journals (Sweden)

    Mohammad Jahanbakht

    2012-01-01

    Full Text Available The non-Euclidean Minkowski fractal geometry is used in design, optimization, and fabrication of an ultrawideband (UWB branch line coupler. Self-similarities of the fractal geometries make them act like an infinite length in a finite area. This property creates a smaller design with broader bandwidth. The designed 3 dB microstrip coupler has a single layer and uniplanar platform with quite easy fabrication process. This optimized 180° coupler also shows a perfect isolation and insertion loss over the UWB frequency range of 3.1–10.6 GHz.

  19. Refractive index engineering with subwavelength gratings for efficient microphotonic couplers and planar waveguide multiplexers.

    Science.gov (United States)

    Cheben, Pavel; Bock, Przemek J; Schmid, Jens H; Lapointe, Jean; Janz, Siegfried; Xu, Dan-Xia; Densmore, Adam; Delâge, André; Lamontagne, Boris; Hall, Trevor J

    2010-08-01

    We use subwavelength gratings (SWGs) to engineer the refractive index in microphotonic waveguides, including practical components such as input couplers and multiplexer circuits. This technique allows for direct control of the mode confinement by changing the refractive index of a waveguide core over a range as broad as 1.6-3.5 by lithographic patterning. We demonstrate two experimental examples of refractive index engineering, namely, a microphotonic fiber-chip coupler with a coupling loss as small as -0.9dB and minimal wavelength dependence and a planar waveguide multiplexer with SWG nanostructure, which acts as a slab waveguide for light diffracted by the grating, while at the same time acting as a lateral cladding for the strip waveguide. This yields an operation bandwidth of 170nm for a device size of only approximately 160microm x100microm.

  20. Direct optical imaging of graphene in vitro by nonlinear femtosecond laser spectral reshaping.

    Science.gov (United States)

    Li, Baolei; Cheng, Yingwen; Liu, Jie; Yi, Congwen; Brown, April S; Yuan, Hsiangkuo; Vo-Dinh, Tuan; Fischer, Martin C; Warren, Warren S

    2012-11-14

    Nonlinear optical microscopy, based on femtosecond laser spectral reshaping, characterized and imaged graphene samples made from different methods, both on slides and in a biological environment. This technique clearly discriminates between graphene flakes with different numbers of layers and reveals the distinct nonlinear optical properties of reduced graphene oxide as compared to mechanically exfoliated or chemical vapor deposition grown graphene. The nonlinearity makes it applicable to scattering samples (such as tissue) as opposed to previous methods, such as transmission. This was demonstrated by high-resolution imaging of breast cancer cells incubated with graphene flakes.

  1. Unconsumed precursors and couplers after formation of oxidative hair dyes

    DEFF Research Database (Denmark)

    Rastogi, Suresh Chandra; Søsted, Heidi; Johansen, Jeanne Duus

    2006-01-01

    Contact allergy to hair dye ingredients, especially precursors and couplers, is a well-known entity among consumers having hair colouring done at home or at a hairdresser. The aim of the present investigation was to estimate consumer exposure to some selected precursors (p-phenylenediamine, toluene......-2,5-diamine) and couplers (3-aminophenol, 4-aminophenol, resorcinol) of oxidative hair dyes during and after hair dyeing. Concentrations of unconsumed precursors and couplers in 8 hair dye formulations for non-professional use were investigated, under the conditions reflecting hair dyeing. Oxidative...... hair dye formation in the absence of hair was investigated using 6 products, and 2 products were used for experimental hair dyeing. In both presence and absence of hair, significant amounts of unconsumed precursors and couplers remained in the hair dye formulations after final colour development. Thus...

  2. Evaluation of a direct 4D reconstruction method using generalised linear least squares for estimating nonlinear micro-parametric maps.

    Science.gov (United States)

    Angelis, Georgios I; Matthews, Julian C; Kotasidis, Fotis A; Markiewicz, Pawel J; Lionheart, William R; Reader, Andrew J

    2014-11-01

    Estimation of nonlinear micro-parameters is a computationally demanding and fairly challenging process, since it involves the use of rather slow iterative nonlinear fitting algorithms and it often results in very noisy voxel-wise parametric maps. Direct reconstruction algorithms can provide parametric maps with reduced variance, but usually the overall reconstruction is impractically time consuming with common nonlinear fitting algorithms. In this work we employed a recently proposed direct parametric image reconstruction algorithm to estimate the parametric maps of all micro-parameters of a two-tissue compartment model, used to describe the kinetics of [[Formula: see text]F]FDG. The algorithm decouples the tomographic and the kinetic modelling problems, allowing the use of previously developed post-reconstruction methods, such as the generalised linear least squares (GLLS) algorithm. Results on both clinical and simulated data showed that the proposed direct reconstruction method provides considerable quantitative and qualitative improvements for all micro-parameters compared to the conventional post-reconstruction fitting method. Additionally, region-wise comparison of all parametric maps against the well-established filtered back projection followed by post-reconstruction non-linear fitting, as well as the direct Patlak method, showed substantial quantitative agreement in all regions. The proposed direct parametric reconstruction algorithm is a promising approach towards the estimation of all individual microparameters of any compartment model. In addition, due to the linearised nature of the GLLS algorithm, the fitting step can be very efficiently implemented and, therefore, it does not considerably affect the overall reconstruction time.

  3. New design of 2-D photonic crystal waveguide couplers

    Institute of Scientific and Technical Information of China (English)

    ZHONG Zhi-rong; ZHANG Li-hua; YANG Hong-qin; JIANG Yun-kun

    2006-01-01

    @@ Based on couple wave equation and finite-difference time-domain (FDTD) algorithm,the strong couple characteristic of 2-D photonic crystal couplers is calculated.Theoretical analysis and numerical simulated results indicate that the energy in a 2-D photonic crystal coupler can not be totally transferred between two wave-guides.Compared with the result of weak coupling theory,our result is more accurate.

  4. Structure analysis of optical fiber coupler with infrared spectrometry

    Institute of Scientific and Technical Information of China (English)

    段吉安; 帅词俊; 苗健宇; 钟掘

    2004-01-01

    To obtain excellent performance optical fiber couplers, the structural difference of SiO2 in couplers with different manufacturing techniques was investigated. With 740-FT-IR infrared spectrometric analyzer, the infrared absorption spectrum of SiO2 in couplers at different drawing velocities was measured, and two characteristic peaks in the wavenumber range of 650 - 2000 cm-1 were observed. One characteristic peak is at about 943 cm-1 , which is attributed to Si-O Si bond asymmetric stretching vibration, the other is at about 773 cm-1 , which is attributed to Si-O-Si bond symmetric stretching vibration. From the infrared spectrum, it is found that the intensity and wavenumber of the characteristic peaks are related to the manufacturing technique of couplers. The characteristic peak at about 943 cm-1 becomes steeper when increasing the drawing velocity. At the drawing velocity of 150 μm/s, the distance between the two characteristic peaks is maximum, and then the optical fiber coupler has excellent performance, indicating that the performance of the optical fiber coupler has a close relationship with the wavenumber of the two characteristic peaks.

  5. Experimental characteristics of a lower hybrid wave multi-junction coupler in the HT-7 tokamak

    Institute of Scientific and Technical Information of China (English)

    Ding Bo-Jiang; Jiang Min; Zhang Gong-Rang; Huang Feng; Zhao Yan-Ping; Kuang Guang-Li; HT-7 team; Shan Jia-Fang; Liu Fu-Kun; Fang Yu-De; Wei Wei; Wu Zhen-Wei; Chen Zhong-Yong; Xu Han-Dong; Wang Mao

    2006-01-01

    A phase-controlled lower hybrid wave (LHW) multi-junction (M J) coupler (3(rows)×4(columns)×4 (subwaveguides)) has been developed in the HT-7 tokamak. Simulations show that it is more effective for driving plasma current than an ordinary phase-controlled LHW antenna (3(rows)× 12(columns)) (traditional coupler). The plasma-wave coupling experiments show that the reflection coefficient (RC) is below 10%, implying that the MJ grill can launch the wave into the plasma effectively. The effect of power spectrum launched by the MJ coupler on RC indicates that an optimal condition is requisite for a better coupling in the lower hybrid current drive (LHCD) experiments. Studies indicate that the drive efficiency of the MJ antenna is higher than that of the traditional one, which is mainly ascribed to the discrepancy in impurity concentration, plasma temperature, and spectrum directivity. An improved confinement with an electron internal transport barrier is obtained by LHCD. The analysis shows that the modified negative (low)magnetic shear and the change of radial electric field profile due to LHCD are possible factors responsible for the eITB formation.

  6. Direct Adaptive Tracking Control for a Class of Pure-Feedback Stochastic Nonlinear Systems Based on Fuzzy-Approximation

    Directory of Open Access Journals (Sweden)

    Huanqing Wang

    2014-01-01

    Full Text Available The problem of fuzzy-based direct adaptive tracking control is considered for a class of pure-feedback stochastic nonlinear systems. During the controller design, fuzzy logic systems are used to approximate the packaged unknown nonlinearities, and then a novel direct adaptive controller is constructed via backstepping technique. It is shown that the proposed controller guarantees that all the signals in the closed-loop system are bounded in probability and the tracking error eventually converges to a small neighborhood around the origin in the sense of mean quartic value. The main advantages lie in that the proposed controller structure is simpler and only one adaptive parameter needs to be updated online. Simulation results are used to illustrate the effectiveness of the proposed approach.

  7. Nonlinear switching in multicore versus multimode waveguide junctions for mode-locked laser applications.

    Science.gov (United States)

    Nazemosadat, Elham; Mafi, Arash

    2013-12-16

    The main differences in nonlinear switching behavior between multicore versus multimode waveguide couplers are highlighted. By gradually decreasing the separation between the two cores of a dual-core waveguide and interpolating from a multicore to a multimode scenario, the role of the linear coupling, self-phase modulation, cross-phase modulation, and four-wave mixing terms are explored, and the key reasons are identified behind higher switching power requirements and lower switching quality in multimode nonlinear couplers.

  8. Minimal-Approximation-Based Distributed Consensus Tracking of a Class of Uncertain Nonlinear Multiagent Systems With Unknown Control Directions.

    Science.gov (United States)

    Choi, Yun Ho; Yoo, Sung Jin

    2017-03-28

    A minimal-approximation-based distributed adaptive consensus tracking approach is presented for strict-feedback multiagent systems with unknown heterogeneous nonlinearities and control directions under a directed network. Existing approximation-based consensus results for uncertain nonlinear multiagent systems in lower-triangular form have used multiple function approximators in each local controller to approximate unmatched nonlinearities of each follower. Thus, as the follower's order increases, the number of the approximators used in its local controller increases. However, the proposed approach employs only one function approximator to construct the local controller of each follower regardless of the order of the follower. The recursive design methodology using a new error transformation is derived for the proposed minimal-approximation-based design. Furthermore, a bounding lemma on parameters of Nussbaum functions is presented to handle the unknown control direction problem in the minimal-approximation-based distributed consensus tracking framework and the stability of the overall closed-loop system is rigorously analyzed in the Lyapunov sense.

  9. Direct measurement of non-linear properties of bipartite quantum states

    CERN Document Server

    Bovino, F A; Castagnoli, G C; Ekert, A; Horodecki, P; Sergienko, A V; Alves, Carolina Moura; Bovino, Fabio Antonio; Castagnoli, Giuseppe; Ekert, Artur; Horodecki, Pawel; Sergienko, Alexander Vladimir

    2005-01-01

    Non-linear properties of quantum states, such as entropy or entanglement, quantify important physical resources and are frequently used in quantum information science. They are usually calculated from a full description of a quantum state, even though they depend only on a small number parameters that specify the state. Here we extract a non-local and a non-linear quantity, namely the Renyi entropy, from local measurements on two pairs of polarization entangled photons. We also introduce a "phase marking" technique which allows to select uncorrupted outcomes even with non-deterministic sources of entangled photons. We use our experimental data to demonstrate the violation of entropic inequalities. They are examples of a non-linear entanglement witnesses and their power exceeds all linear tests for quantum entanglement based on all possible Bell-CHSH inequalities.

  10. "Hot-wire" microfluidic flowmeter based on a microfiber coupler.

    Science.gov (United States)

    Yan, Shao-Cheng; Liu, Zeng-Yong; Li, Cheng; Ge, Shi-Jun; Xu, Fei; Lu, Yan-Qing

    2016-12-15

    Using an optical microfiber coupler (MC), we present a microfluidic platform for strong direct or indirect light-liquid interaction by wrapping a MC around a functionalized capillary. The light propagating in the MC and the liquid flowing in the capillary can be combined and divorced smoothly, keeping a long-distance interaction without the conflict of input and output coupling. Using this approach, we experimentally demonstrate a "hot-wire" microfluidic flowmeter based on a gold-integrated helical MC device. The microfluid inside the glass channel takes away the heat, then cools the MC and shifts the resonant wavelength. Due to the long-distance interaction and high temperature sensitivity, the proposed microfluidic flowmeter shows an ultrahigh flow rate sensitivity of 2.183 nm/(μl/s) at a flow rate of 1 μl/s. The minimum detectable change of the flow rate is around 9 nl/s at 1 μl/s.

  11. Chirp-free direct modulation of 550 nm emission in Er3+ -Doped Fluoroindate glass by nonlinear feedback control

    Science.gov (United States)

    Cai, Runyu; Thitsa, Makhin; Bluiett, Althea; Brown, Ei; Hommerich, Uwe

    2017-06-01

    We propose a direct modulation method with nonlinear feedback controller which can produce chirp-free modulation of the output pulse without bulky external modulators. This work reports the design of the controller which, via a feedback loop, varies and controls the pump rate in real time by automatically adjusting the pump power to precisely modulate the emission of 550 nm in Er3+ -doped Fluoroindate glass under 1.48 μm pumping. In this interdisciplinary paper, well established theoretical tools from nonlinear control theory are applied to the dynamical system of the laser material in order to produce the desired output of the laser. The controller is simulated in MATLAB Simulink and the simulation results show that our technique yields precise modulation of the output intensity without frequency chirping. Results on both theoretical analysis of the control methodology and simulation are presented.

  12. Numerical characterization of nanopillar photonic crystal waveguides and directional couplers

    DEFF Research Database (Denmark)

    Chigrin, Dmitry N.; Lavrinenko, Andrei; Sotomayor Torres, Clivia M.

    2005-01-01

    We numerically characterize a novel type of a photonic crystal waveguide, which consists of several rows of periodically arranged dielectric cylinders. In such a nanopillar photonic crystal waveguide, light confinement is due to the total internal reflection. A nanopillar waveguide is a multimode...

  13. Properties of directional couplers using photonic crystal waveguides

    DEFF Research Database (Denmark)

    Thorhauge, Morten; Borel, Peter Ingo; Frandsen, Lars Hagedorn;

    2003-01-01

    Coupled photonic crystal waveguides have been designed and modelled with a 3D finite-difference-time-domain method, and fabricated in silicon-on-insulator material. Good agreement between modelled and measured results has been found.......Coupled photonic crystal waveguides have been designed and modelled with a 3D finite-difference-time-domain method, and fabricated in silicon-on-insulator material. Good agreement between modelled and measured results has been found....

  14. Directional couplers using long-range surface plasmon polariton waveguides

    DEFF Research Database (Denmark)

    Boltasseva, Alexandra; Bozhevolnyi, Sergey I.

    2006-01-01

    We present an experimental study of guiding and routing of electromagnetic radiation along the nanometer-thin and micrometer-wide gold stripes embedded in a polymer via excitation of long-range surface plasmon polaritons (LR-SPPs) in a very broad wavelength range from 1000 to 1650 mn. For straight...

  15. Considering "Nonlinearity" Across the Continuum in Medical Education Assessment: Supporting Theory, Practice, and Future Research Directions.

    Science.gov (United States)

    Durning, Steven J; Lubarsky, Stuart; Torre, Dario; Dory, Valérie; Holmboe, Eric

    2015-01-01

    The purpose of this article is to propose new approaches to assessment that are grounded in educational theory and the concept of "nonlinearity." The new approaches take into account related phenomena such as "uncertainty," "ambiguity," and "chaos." To illustrate these approaches, we will use the example of assessment of clinical reasoning, although the principles we outline may apply equally well to assessment of other constructs in medical education. Theoretical perspectives include a discussion of script theory, assimilation theory, self-regulated learning theory, and situated cognition. Assessment examples to include script concordance testing, concept maps, self-regulated learning microanalytic technique, and work-based assessment, which parallel the above-stated theories, respectively, are also highlighted. We conclude with some practical suggestions for approaching nonlinearity.

  16. Apodized grating coupler using fully-etched nanostructures

    Science.gov (United States)

    Wu, Hua; Li, Chong; Li, Zhi-Yong; Guo, Xia

    2016-08-01

    A two-dimensional apodized grating coupler for interfacing between single-mode fiber and photonic circuit is demonstrated in order to bridge the mode gap between the grating coupler and optical fiber. The grating grooves of the grating couplers are realized by columns of fully etched nanostructures, which are utilized to digitally tailor the effective refractive index of each groove in order to obtain the Gaussian-like output diffractive mode and then enhance the coupling efficiency. Compared with that of the uniform grating coupler, the coupling efficiency of the apodized grating coupler is increased by 4.3% and 5.7%, respectively, for the nanoholes and nanorectangles as refractive index tunes layer. Project supported by the National Natural Science Foundation of China (Grant Nos. 61222501, 61335004, and 61505003), the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20111103110019), the Postdoctoral Science Foundation of Beijing Funded Project, China (Grant No. Q6002012201502), and the Science and Technology Research Project of Jiangxi Provincial Education Department, China (Grant No. GJJ150998).

  17. Influence of load by high power on the optical coupler

    Science.gov (United States)

    Bednarek, Lukas; Poboril, Radek; Vanderka, Ales; Hajek, Lukas; Nedoma, Jan; Vasinek, Vladimir

    2016-12-01

    Nowadays, aging of the optical components is a very current topic. Therefore, some investigations are focused on this area, so that the aging of the optical components is accelerated by thermal, high power and gamma load. This paper deals by findings of the influence of the load by laser with high optical power on the transmission parameters of the optical coupler. The investigated coupler has one input and eight outputs (1x8). Load by laser with high optical power is realized using a fiber laser with a cascade configuration EDFA amplifiers. The output power of the amplifier is approximately 250 mW. Duration of the load is moving from 104 hours to 139 hours. After each load, input power and output powers of all branches are measured. Following parameters of the optical coupler are calculated using formulas: the insertion losses of the individual branches, split ratio, total losses, homogeneity of the losses and cross-talk between different branches. All measurements are performed at wavelengths 1310 nm and 1550 nm. Individual optical powers are measured 20 times, due to the exclusion of statistical error of the measurement. After measuring, the coupler is connected to the amplifier for next cycle of the load. The paper contains an evaluation of the results of the coupler before and after four cycles of the burden.

  18. Nonlinear Transformation Optics Techniques in the Design of Counter-Directed Energy Weapon Shields for Satellites

    Science.gov (United States)

    2012-12-01

    or proof, rather as a review and reference for subsequent sections. Brau’s Modern Problems in Electrodynamics and Mill’s Nonlinear Optics are both... Modern Problems in Electrodynamics , follows from the Lorentz-Drude Model for the polarization of the atom[2]. In this model, the electron is harmonically...2] C. A. Brau, Modern Problems in Classical Electrodynamics , New York: Oxford University Press, 2004. [3] K. Than, “Scientists Create Cloak of

  19. Nonlinear waves in lattice materials: Adaptively augmented directivity and functionality enhancement by modal mixing

    Science.gov (United States)

    Ganesh, R.; Gonella, S.

    2017-02-01

    The motive of this work is to understand the complex spatial characteristics of finite-amplitude elastic wave propagation in periodic structures and leverage the unique opportunities offered by nonlinearity to activate complementary functionalities and design adaptive spatial wave manipulators. The underlying assumption is that the magnitude of wave propagation is small with respect to the length scale of the structure under consideration, albeit large enough to elicit the effects of finite deformation. We demonstrate that the interplay of dispersion, nonlinearity and modal complexity involved in the generation and propagation of higher harmonics gives rise to secondary wave packets that feature multiple characteristics, one of which conforms to the dispersion relation of the corresponding linear structure. This provides an opportunity to engineer desired wave characteristics through a geometric and topological design of the unit cell, and results in the ability to activate complementary functionalities, typical of high frequency regimes, while operating at low frequencies of excitation - an effect seldom observed in linear periodic structures. The ability to design adaptive switches is demonstrated here using lattice configurations whose response is characterized by geometric and/or material nonlinearities.

  20. Design of a Polymer Directional Coupler Electro-Optic Switch with Low Push-Pull Switching Voltage at 1550nm%1550nm低推挽电压聚合物定向耦合电光开关的设计

    Institute of Scientific and Technical Information of China (English)

    郑传涛; 马春生; 闫欣; 王现银; 张大明

    2008-01-01

    A polymer directional coupler (DC) electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modulation theory. Its structure and principle are described, the design and optimization are performed, and the characteristics are analyzed,including the coupling length, switching voltage, output power, insertion loss, and crosstalk. To realize normal switching function, the fabrication tolerance, wavelength shift, and coupling loss between a single mode fiber (SMF) and the waveguide are discussed. Simulation results show that the coupling length is 3082μm; the push-pull switching voltage is 2.14V;and the insertion loss and crosstalk are less than 1.14 and -30dB, respectively. The proposed analytical technique on waveguides and electrodes is proven to be accurate and computationally efficient when compared with the beam propagation method (BPM) and the experimental results.%应用保角变换法、镜像法、耦合模理论和电光调制理论设计了一种推挽电极聚合物脊形波导定向耦合电光开关,阐述了基本结构和工作原理,给出了器件的设计和优化过程,主要分析了耦合长度、开关电压、输出光功率、插入损耗、串扰等特性.为了实现正常的开关功能,讨论了制作公差、波谱漂移以及单模光纤耦合损耗对器件性能的影响.模拟结果表明,所设计的开关的耦合长度为3082μm,开关电压为2.14V;插入损耗小于1.14dB,串扰小于-30dB.与BPM仿真结果以及实验结果的对比表明,文中提出的波导和电极的理论分析与计算方法具有较高的精度和可行性.

  1. Adaptive fuzzy prescribed performance control for MIMO nonlinear systems with unknown control direction and unknown dead-zone inputs.

    Science.gov (United States)

    Shi, Wuxi; Luo, Rui; Li, Baoquan

    2017-01-01

    In this study, an adaptive fuzzy prescribed performance control approach is developed for a class of uncertain multi-input and multi-output (MIMO) nonlinear systems with unknown control direction and unknown dead-zone inputs. The properties of symmetric matrix are exploited to design adaptive fuzzy prescribed performance controller, and a Nussbaum-type function is incorporated in the controller to estimate the unknown control direction. This method has two prominent advantages: it does not require the priori knowledge of control direction and only three parameters need to be updated on-line for this MIMO systems. It is proved that all the signals in the resulting closed-loop system are bounded and that the tracking errors converge to a small residual set with the prescribed performance bounds. The effectiveness of the proposed approach is validated by simulation results.

  2. Coordinated orbit-tracking control of second-order non-linear agents with directed communication topologies

    Science.gov (United States)

    Chen, Y.-Y.; Zhang, Y.; Liu, C.-L.; Wei, P.

    2016-12-01

    This paper deals with two-dimensional and three-dimensional cooperative control of multiple agents formation tracking a set of given closed orbits, where each agent has intrinsic second-order non-linear dynamics and the communication topology among agents is directed. By using our previous curve extension method, the cooperative control system can be regarded as a cascade system composed of the orbit-tracking subsystem and the formation subsystem with the orbit-tracking error as input. A novel solution is established by separatively designing the orbit-tracking control law and the formation control protocol ignoring the perturbation at first and then applying input-to-state stability theory to analyse the asymptotic stability of the cascade system. It is shown that the closed-loop system is asymptotic stability if the directed communication topology contains a directed spanning tree. The effectiveness of the analytical results is verified by numerical simulations.

  3. Ultrawide Bandwidth 180°-Hybrid-Coupler in Planar Technology

    Directory of Open Access Journals (Sweden)

    Steffen Scherr

    2014-01-01

    Full Text Available A new concept of an ultrawide bandwidth 180°-hybrid-coupler is presented. The ultrawideband design approach is based on the excitation of a coplanar waveguide (CPW mode and a coupled slot line (CSL mode in the same double slotted planar waveguide. The coupler is suitable for realization in planar printed circuit board technology. For verification of the new concept a prototype was designed for the frequency range from 3 GHz to 11 GHz, built, and measured. The measurement results presented in this paper show a good agreement between simulation and measurement and demonstrate the very broadband performance of the new device. The demonstrated coupler with a size of 40 mm × 55 mm exhibits a fractional bandwidth of 114% centered at 7 GHz with a maximum amplitude imbalance of 0.8 dB and a maximum phase imbalance of 5°.

  4. Thin-ribbon tapered coupler for dielectric waveguides

    Science.gov (United States)

    Yeh, C.; Otoshi, T. Y.; Shimabukuro, F. I.

    1994-05-01

    A recent discovery shows that a high-dielectric constant, low-loss, solid material can be made into a ribbon-like waveguide structure to yield an attenuation constant of less than 0.02 dB/m for single-mode guidance of millimeter/submillimeter waves. One of the crucial components that must be invented in order to guarantee the low-loss utilization of this dielectric-waveguide guiding system is the excitation coupler. The traditional tapered-to-a-point coupler for a dielectric rod waveguide fails when the dielectric constant of the dielectric waveguide is large. This article presents a new way to design a low-loss coupler for a high- or low-dielectric constant dielectric waveguide for millimeter or submillimeter waves.

  5. Direct measurements of multi-photon induced nonlinear lattice dynamics in semiconductors via time-resolved x-ray scattering

    Science.gov (United States)

    Williams, G. Jackson; Lee, Sooheyong; Walko, Donald A.; Watson, Michael A.; Jo, Wonhuyk; Lee, Dong Ryeol; Landahl, Eric C.

    2016-12-01

    Nonlinear optical phenomena in semiconductors present several fundamental problems in modern optics that are of great importance for the development of optoelectronic devices. In particular, the details of photo-induced lattice dynamics at early time-scales prior to carrier recombination remain poorly understood. We demonstrate the first integrated measurements of both optical and structural, material-dependent quantities while also inferring the bulk impulsive strain profile by using high spatial-resolution time-resolved x-ray scattering (TRXS) on bulk crystalline gallium arsenide. Our findings reveal distinctive laser-fluence dependent crystal lattice responses, which are not described by previous TRXS experiments or models. The initial linear expansion of the crystal upon laser excitation stagnates at a laser fluence corresponding to the saturation of the free carrier density before resuming expansion in a third regime at higher fluences where two-photon absorption becomes dominant. Our interpretations of the lattice dynamics as nonlinear optical effects are confirmed by numerical simulations and by additional measurements in an n-type semiconductor that allows higher-order nonlinear optical processes to be directly observed as modulations of x-ray diffraction lineshapes.

  6. Stochastic Consensus of Single-Integrator Multiagent Systems with Inherent Nonlinear Dynamics and Measurement Noises in Directed Fixed Topologies

    Directory of Open Access Journals (Sweden)

    Sabir Djaidja

    2014-01-01

    Full Text Available Consensus of continuous-time single-integrator multiagent systems with inherent nonlinear dynamics and measurement noises is addressed in this paper. The consensus controller is developed for directed interaction topologies. Each agent’s control input is constructed based on its own state and its neighbors’ states corrupted by noises. The control input contains a time-varying consensus gain in order to attenuate the noises. Conditions for ensuring mean square convergence under noisy measurement and asymptotic convergence in the noise-free case are derived. Finally, some simulations were carried out to show the effectiveness of our control law and how it can solve the consensus problem.

  7. Nonlinear distortion evaluation in a directly modulated distributed feedback laser diode-based fiber-optic cable television transport system

    Science.gov (United States)

    Li, Chung-Yi; Ying, Cheng-Ling; Lin, Chun-Yu; Chu, Chien-An

    2015-12-01

    This study evaluated a directly modulated distributed feedback (DFB) laser diode (LD) for cable TV systems with respect to carrier-to-nonlinear distortion of LDs. The second-order distortion-to-carrier ratio is found to be proportional to that of the second-order coefficient-to-first-order coefficient of the DFB laser diode driving current and to the optical modulation index (OMI). Furthermore, the third-order distortion-to-carrier ratio is proportional to that of the third-order coefficient-to-first-order coefficient of the DFB laser diode driving current, and to the OMI2.

  8. Numerical Analysis on Transmission Characteristics of a Bragg Grating Assisted Mismatched Fiber Coupler

    Institute of Scientific and Technical Information of China (English)

    WEI Daoping; JIANG Zhong'ao; ZHAO Yucheng; JIAN Shuisheng

    2000-01-01

    Based on mode-coupled theory, a Bragg grating assisted mismatched fiber coupler is analyzed theoretically. At the same time, a detailed numerical analysis on transmission characteristics of the coupler is carried out when it considers the arcs of two fibers in the coupling region of the coupler or not, and the optimized design on the Bragg grating assisted mismatched fiber coupler for wavelength-division multiplexing/ demultiplexing is proposed.

  9. Frequency support capability of variable speed wind turbine based on electromagnetic coupler

    DEFF Research Database (Denmark)

    You, Rui; Barahona Garzón, Braulio; Chai, Jianyun;

    2015-01-01

    In the variable speed wind turbine based on electromagnetic coupler (WT-EMC), a synchronous generator is directly coupled with grid. So like conventional power plants WT-EMC is able to support grid frequency inherently. But due to the reduced inertia of synchronous generator, its frequency support...... capability has to be enhanced. In this paper, the frequency support capability of WT-EMC is studied at three typical wind conditions and with two control strategies-droop control and inertial control to enhance its frequency support capability. The synchronous generator speed, more stable than the grid...

  10. Transmission and Distribution of Optical Field in Prism Coupler

    Energy Technology Data Exchange (ETDEWEB)

    Huang, C Q; Chen, M [College of Physics and Electronics Information, Hunan Institute of Science and Technology, Yueyang 414006 (China); Liu, J; Wan, Z M; Luo, Z M [College of Information and Communication Engineering, Hunan Institute of Science and Technology, Yueyang 414006 (China); Tian, P, E-mail: namecqh@yahoo.com.cn [College of Optoelectronic Science and Engineering, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074 (China)

    2011-02-01

    Transmission and distribution characteristics of optical field in prism coupler are studies, and the phase matching function of prism coupler is deduced based on coupled wave theory. It is shown that the stable light field distribution and mode pattern are determined by its own geometric and dielectric parameters, but have nothing to do with the categories of incident light sources. It is also found that the coupling effect would generate between waveguides through evanescent field. Our numerical simulation is based on the finite difference time domain method with perfectly matched layer absorbing boundary condition. The simulation program is compiled in MATLAB. The simulation results are analyzed carefully.

  11. Field analysis of two-dimensional focusing grating couplers

    Science.gov (United States)

    Borsboom, P.-P.; Frankena, H. J.

    1995-05-01

    A different technique was developed by which several two-dimensional dielectric optical gratings, consisting 100 or more corrugations, were treated in a numerical reliable approach. The numerical examples that were presented were restricted to gratings made up of sequences of waveguide sections symmetric about the x = 0 plane. The newly developed method was effectively used to investigate the field produced by a two-dimensional focusing grating coupler. Focal-region fields were determined for three symmetrical gratings with 19, 50, and 124 corrugations. For focusing grating coupler with limited length, high-frequency intensity variations were noted in the focal region.

  12. Design and Analysis of Compact Directionally Coupled Bistable Laser Diodes

    Institute of Scientific and Technical Information of China (English)

    Mitsuru; Takenaka; Yoshiaki; Nakano

    2003-01-01

    A compact optical flip-flop with a directional coupler has been designed and analyzed. Using a narrow gap directional coupler, we have predicted the device length could be reduced down to 500μm from 1300μm.

  13. Design and Analysis of Compact Directionally Coupled Bistable Laser Diodes

    Institute of Scientific and Technical Information of China (English)

    Mitsuru Takenaka; Yoshiaki Nakano

    2003-01-01

    A compact optical flip-flop with a directional coupler has been designed and analyzed. Using a narrow gap directional coupler, we have predicted the device length could be reduced down to 500 μm from 1300 μm.

  14. Output-feedback adaptive neural control for stochastic nonlinear time-varying delay systems with unknown control directions.

    Science.gov (United States)

    Li, Tieshan; Li, Zifu; Wang, Dan; Chen, C L Philip

    2015-06-01

    This paper presents an adaptive output-feedback neural network (NN) control scheme for a class of stochastic nonlinear time-varying delay systems with unknown control directions. To make the controller design feasible, the unknown control coefficients are grouped together and the original system is transformed into a new system using a linear state transformation technique. Then, the Nussbaum function technique is incorporated into the backstepping recursive design technique to solve the problem of unknown control directions. Furthermore, under the assumption that the time-varying delays exist in the system output, only one NN is employed to compensate for all unknown nonlinear terms depending on the delayed output. Moreover, by estimating the maximum of NN parameters instead of the parameters themselves, the NN parameters to be estimated are greatly decreased and the online learning time is also dramatically decreased. It is shown that all the signals of the closed-loop system are bounded in probability. The effectiveness of the proposed scheme is demonstrated by the simulation results.

  15. Parallel finite difference beam propagation method based on message passing interface: application to MMI couplers with two-dimensional confinement

    Institute of Scientific and Technical Information of China (English)

    Chaojun Yan; Wenbiao Peng; Haijun Li

    2007-01-01

    @@ The alternate-direction implicit finite difference beam propagation method (FD-BPM) is used to analyze the two-dimensional (2D) symmetrical multimode interference (MMI) couplers. The positions of the images at the output plane and the length of multimode waveguide are accurately determined numerically. In order to reduce calculation time, the parallel processing of the arithmetic is implemented by the message passing interface and the simulation is accomplished by eight personal computers.

  16. Hollow-core tapered coupler for large inner diameter hollow-core optical fibers

    Institute of Scientific and Technical Information of China (English)

    Guiyao Zhou(周桂耀); Zhiyun Hou(侯峙云); Lantian Hou(侯蓝田); Jigang Liu(刘继刚)

    2003-01-01

    A novel hollow-core tapered coupler has been theoretically designed and fabricated by fiber drawing machine. The coupler's inner wall is coated with a polycrystalline GeO2 film. The coupling loss of hollow-core tapered coupler is about 0.2 dB. Hollow-core tapered coupler reduces the transmission loss of hollow-core optical fiber (HCOF) by 0.5 dB/m, therefore the coupler is suitable for coupling high power CO2 laser in industrial application.

  17. Omnidirectional spin-wave nanograting coupler

    OpenAIRE

    Yu, Haiming; Duerr, G.; Huber, R.; Bahr, M.; Schwarze, T.; Brandl, F.; Grundler, D.

    2013-01-01

    Magnonics as an emerging nanotechnology offers functionalities beyond current semiconductor technology. Spin waves used in cellular nonlinear networks are expected to speed up technologically, demanding tasks such as image processing and speech recognition at low power consumption. However, efficient coupling to microelectronics poses a vital challenge. Previously developed techniques for spin-wave excitation (for example, by using parametric pumping in a cavity) may not allow for the relevan...

  18. High-refractive-index measurement with an elastomeric grating coupler

    NARCIS (Netherlands)

    Kocabas, Askin; Ay, Feridun; Dana, Aykutiu; Kiyat, Isa; Aydinli, Atilla

    2005-01-01

    An elastomeric grating coupler fabricated by the replica molding technique is used to measure the modal indices of a silicon-on-insulator (SOI) planar waveguide structure. Because of the van der Waals interaction between the grating mold and the waveguide, the elastomeric stamp makes conformal conta

  19. Cancellation of RF Coupler-Induced Emittance Due to Astigmatism

    Energy Technology Data Exchange (ETDEWEB)

    Dowell, David H.; /SLAC

    2016-12-11

    It is well-known that the electron beam quality required for applications such as FEL’s and ultra-fast electron diffraction can be degraded by the asymmetric fields introduced by the RF couplers of superconducting linacs. This effect is especially troublesome in the injector where the low energy beam from the gun is captured into the first high gradient accelerator section. Unfortunately modifying the established cavity design is expensive and time consuming, especially considering that only one or two sections are needed for an injector. Instead, it is important to analyze the coupler fields to understand their characteristics and help find less costly solutions for their cancellation and mitigation. This paper finds the RF coupler-induced emittance for short bunches is mostly due to the transverse spatial sloping or tilt of the field, rather than the field’s time-dependence. It is shown that the distorting effects of the coupler can be canceled with a static (DC) quadrupole lens rotated about the z-axis.

  20. Synthesis and analysis of coupler curves with combined planar cam ...

    African Journals Online (AJOL)

    user

    works are done on the synthesis of coupler curves or path generation using four bar mechanism. The present work ..... Sadler, J.P., and Yang, Z. 1990. Optimal design of cam-linkage mechanisms for dynamic-force characteristics. Journal of.

  1. Single etch grating couplers for mass fabrication with DUV lithography

    National Research Council Canada - National Science Library

    Halir, R; Zavargo-Peche, L; Xu, Dan-Xia; Cheben, Pavel; Ma, Rubin; Schmid, Jens Holger; Janz, Siegfried; Densmore, Adam; Ortega-Moñux, A; Molina-Fernández, Í; Fournier, M; Fédeli, J.-M

    2012-01-01

    ... efficiencies with a single etch step, thereby significantly reducing fabrication complexity. Here we demonstrate that such couplers can be fabricated on a large scale with ultra-violet lithography, achieving a 5 dB coupling efficiency at 1,550 nm...

  2. A coaxial HOM coupler for a superconducting RF cavity and its low-power measurement results

    Institute of Scientific and Technical Information of China (English)

    SUN An; TANG Ya-Zhe; ZHANG Li-Ping; LI Ying-Min; Han-Sung Kim

    2011-01-01

    A resonant buildup of beam-induced fields in a superconducting radio frequency(RF)cavity may make a beam unstable or a superconducting RF cavity quench. Higher-order mode(HOM)couplers are used for damping higher-order modes to avoid such a resonant buildup. A coaxial HOM coupler based on the TTF (TESLA Test Facility)HOM coupler has been designed for the superconducting RF cavities at the Proton Engineering Frontier Project(PEFP)in order to overcome notch frequency shift and feed-through tip melting issues. In order to confirm the HOM coupler design and finalize its structural dimensions, two prototype HOM couplers have been fabricated and tested. Low-power testing and measurement of the HOM couplers has shown that the HOM coupler has good filter properties and can fully meet the damping requirements of the PEFP low-beta superconducting RF linac.

  3. Peierls-Nabarro energy surfaces and directional mobility of discrete solitons in two-dimensional saturable nonlinear Schr\\"odinger lattices

    CERN Document Server

    Naether, Uta; Johansson, Magnus

    2010-01-01

    We address the problem of directional mobility of discrete solitons in two-dimensional rectangular lattices, in the framework of a discrete nonlinear Schr\\"odinger model with saturable on-site nonlinearity. A numerical constrained Newton-Raphson method is used to calculate two-dimensional Peierls-Nabarro energy surfaces, which describe a pseudopotential landscape for the slow mobility of coherent localized excitations, corresponding to continuous phase-space trajectories passing close to stationary modes. Investigating the two-parameter space of the model through independent variations of the nonlinearity constant and the power, we show how parameter regimes and directions of good mobility are connected to existence of smooth surfaces connecting the stationary states. In particular, directions where solutions can move with minimum radiation can be predicted from flatter parts of the surfaces. For such mobile solutions, slight perturbations in the transverse direction yield additional transverse oscillations w...

  4. Global adaptive exponential stabilisation for nonlinear systems with multiple unknown control directions

    Science.gov (United States)

    Sun, Xifang; Chen, Weisheng; Wu, Jian

    2016-12-01

    In this paper, we address the global generalised exponential stabilisation problem for a class of lower-triangular systems with multiple unknown directions. Instead of the well-known Nussbaum-gain adaptive rule, a Lyapunov-based adaptive logic switching rule is proposed to seek the correct control directions for such systems. The main advantage of the proposed controller is that it can guarantee the global generalised exponential stability of closed-loop systems. Simulation examples are given to verify the effectiveness of the developed control approach.

  5. Generation of femtosecond optical vortex beams in all-fiber mode-locked fiber laser using mode selective coupler

    CERN Document Server

    Wang, Teng; Shi, Fan; Pang, Fufei; Huang, Sujuan; Wang, Tingyun; Zeng, Xianglong

    2016-01-01

    We experimentally demonstrated a high-order optical vortex pulsed laser based on a mode selective all-fiber fused coupler composed of a single-mode fiber (SMF) and a few-mode fiber (FMF). The fused SMF-FMF coupler inserted in the cavity not only acts as mode converter from LP01 mode to LP11 or LP21 modes with a broadband width over 100 nm, but also directly delivers femtosecond vortex pulses out of the mode locked cavity. To the best of our knowledge, this is the first report on the generation of high-order pulse vortex beams in mode-locked fiber laser. The generated 140 femtosecond vortex beam has a spectral width of 67 nm centered at 1544 nm.

  6. Efficiently Harvesting Sun Light for Silicon Solar Cells through Advanced Optical Couplers and A Radial p-n Junction Structure

    Directory of Open Access Journals (Sweden)

    Hsin-Cheng Lee

    2010-04-01

    Full Text Available Silicon-based solar cells (SCs promise to be an alternative energy source mainly due to: (1 a high efficiency-to-cost ratio, (2 the absence of environmental-degradation issues, and (3 great reliability. Transition from wafer-based to thin-film SC significantly reduces the cost of SCs, including the cost from the material itself and the fabrication process. However, as the thickness of the absorption (or the active layer decreases, the energy-conversion efficiency drops dramatically. As a consequence, we discuss here three techniques to increase the efficiency of silicon-based SCs: (1 photonic crystal (PC optical couplers and (2 plasmonic optical couplers to increase efficiency of light absorption in the SCs, and (3 a radial p-n junction structure, decomposing light absorption and diffusion path into two orthogonal directions. The detailed mechanisms and recent research progress regarding these techniques are discussed in this review article.

  7. Non-linear direct effects of acid rain on leaf photosynthetic rate of terrestrial plants

    NARCIS (Netherlands)

    Dong, Dan; Du, Enzai; Sun, Zhengzhong; Zeng, Xuetong; Vries, de Wim

    2017-01-01

    Anthropogenic emissions of acid precursors have enhanced global occurrence of acid rain, especially in East Asia. Acid rain directly suppresses leaf function by eroding surface waxes and cuticle and leaching base cations from mesophyll cells, while the simultaneous foliar uptake of nitrates in

  8. Experimental demonstration of an apodized-imaging chip-fiber grating coupler for Si3N4 waveguides.

    Science.gov (United States)

    Chen, Yang; Domínguez Bucio, Thalia; Khokhar, Ali Z; Banakar, Mehdi; Grabska, Katarzyna; Gardes, Frederic Y; Halir, Robert; Molina-Fernández, Íñigo; Cheben, Pavel; He, Jian-Jun

    2017-09-15

    A silicon nitride waveguide is a promising platform for integrated photonics, particularly due to its low propagation loss compared to other complementary metal-oxide-semiconductor compatible waveguides, including silicon-on-insulator. Input/output coupling in such thin optical waveguides is a key issue for practical implementations. Fiber-to-chip grating couplers in silicon nitride usually exhibit low coupling efficiency because the moderate index contrast leads to weak radiation strengths and poor directionality. Here, we present the first, to the best of our knowledge, experimental demonstration of a recently proposed apodized-imaging fiber-to-chip grating coupler in silicon nitride that images an in-plane waveguide mode to an optical fiber placed at a specific distance above the chip. By employing amplitude and phase apodization, the diffracted optical field of the grating is matched to the fiber mode. High grating directionality is achieved by using staircase grating teeth, which produce a blazing effect. Experimental results demonstrate an apodized-imaging grating coupler with a record coupling efficiency of -1.5  dB and a 3 dB bandwidth of 60 nm in the C-band.

  9. Adaptive fuzzy output-feedback controller design for nonlinear time-delay systems with unknown control direction.

    Science.gov (United States)

    Hua, Chang-Chun; Wang, Qing-Guo; Guan, Xin-Ping

    2009-04-01

    In this paper, the robust-control problem is investigated for a class of uncertain nonlinear time-delay systems via dynamic output-feedback approach. The considered system is in the strict-feedback form with unknown control direction. A full-order observer is constructed with the gains computed via linear matrix inequality at first. Then, with the bounds of uncertain functions known, we design the dynamic output-feedback controller such that the closed-loop system is asymptotically stable. Furthermore, when the bound functions of uncertainties are not available, the adaptive fuzzy-logic system is employed to approximate the uncertain function, and the corresponding output-feedback controller is designed. It is shown that the resulting closed-loop system is stable in the sense of semiglobal uniform ultimate boundedness. Finally, simulations are done to verify the feasibility and effectiveness of the obtained theoretical results.

  10. Germanium under high tensile stress: nonlinear dependence of direct band gap vs. strain

    OpenAIRE

    Guilloy, K.; Pauc, N.; Gassenq, A.; Niquet, Y. M.; Escalante, J. M.; Duchemin, I.; Tardif, S; Dias, G. Osvaldo; Rouchon, D.; Widiez, J.; Hartmann, J.M.; Geiger, R.; Zabel, T.; Sigg, H; Faist, J.

    2016-01-01

    Germanium is a strong candidate as a laser source for silicon photonics. It is widely accepted that the band structure of germanium can be altered by tensile strain so as to reduce the energy difference between its direct and indirect band gaps. However, the conventional deformation potential model most widely adopted to describe this transformation happens to have been investigated only up to 1 % uniaxially loaded strains. In this work, we use a micro-bridge geometry to uniaxially stress ger...

  11. Direct numerical simulations of an inertial wave attractor in linear and nonlinear regimes

    CERN Document Server

    Jouve, Laurène

    2014-01-01

    In a uniformly rotating fluid, inertial waves propagate along rays that are inclined to the rotation axis by an angle that depends on the wave frequency. In closed domains, multiple reflections from the boundaries may cause inertial waves to focus on to particular structures known as wave attractors. Such structures have previously been studied from a theoretical point of view, in laboratory experiments, in linear numerical calculations and in some recent numerical simulations. In the present paper, two-dimensional direct numerical simulations of an inertial wave attractor are presented. In the linear regime, we first recover the results of the linear calculations and asymptotic theory of Ogilvie (2005) who considered a prototypical problem involving the focusing of linear internal waves into a narrow beam centred on a wave attractor in a steady state. The velocity profile of the beam and its scalings with the Ekman number, as well as the asymptotic value of the dissipation rate, are found to be in agreement ...

  12. 基于多边形接触模型的内电车钩建模研究%Research on ND Coupler Modeling Based on Polygonal Contact Model

    Institute of Scientific and Technical Information of China (English)

    邹瑞明; 张志超; 马卫华

    2016-01-01

    在详细分析了内电车钩结构特性和稳钩原理的基础上建立了内电车钩的动力学模型,其中钩尾处的弧面-弧面接触和连挂钩头间的曲面-曲面接触都采用了多边形接触模型进行建模,并详细考虑了内电车钩的结构特性和缓冲器的非线性迟滞特性,相对传统动力学模型,能够更为准确地反映内电车钩在不同工况下的动态行为,同时还能够模拟连挂钩头间的垂向窜动和跳钩安全性等问题。根据摩擦圆理论,内电车钩的稳钩能力主要取决于钩尾的摩擦状态,当车钩转角小于临界值时,车钩处于稳钩状态,一旦车钩转角超出临界值,在纵向压钩力的作用下,钩尾处开始出现滑动,车钩也将发生失稳。结合以上理论分析,并通过仿真结果和现场试验实测数据的对比分析,表明该模型具有较好地可靠性。%The dynamic model of ND coupler has been built up based on detailed analysis of structure character-istics and the coupler stability principle,where the polygonal contact model has been applied to the arc-arc con-tact in coupler tail and surface-surface contact between coupler heads,and the structure characteristics of ND coupler and the nonlinear hysteresis characteristics of buffer have also been considered in detail.Relative to the traditional dynamic model,this model can reflect the dynamic behavior of ND coupler under different working conditions more accurately,meanwhile,it could simulate the vertical bounce and jump safety between coupling couplers.According to the friction circle theory,the stability of ND coupler mainly depended on the friction state of the coupler tail.The coupler was in a stable state when its rotation angle was less than the critical val-ue.Once the coupler angle exceeded the critical value,the coupler tail started to slide with the action of longi-tudinal compression coupler force,which will cause the unstability of the coupler

  13. Power-ratio tunable dual-wavelength laser using linearly variable Fabry-Perot filter as output coupler.

    Science.gov (United States)

    Wang, Xiaozhong; Wang, Zhongfa; Bu, Yikun; Chen, Lujian; Cai, Guoxiong; Huang, Wencai; Cai, Zhiping; Chen, Nan

    2016-02-01

    For a linearly variable Fabry-Perot filter, the peak transmission wavelengths change linearly with the transverse position shift of the substrate. Such a Fabry-Perot filter is designed and fabricated and used as an output coupler of a c-cut Nd:YVO4 laser experimentally in this paper to obtain a 1062 and 1083 nm dual-wavelength laser. The peak transmission wavelengths are gradually shifted from 1040.8 to 1070.8 nm. The peak transmission wavelength of the Fabry-Perot filter used as the output coupler for the dual-wavelength laser is 1068 nm and resides between 1062 and 1083 nm, which makes the transmissions of the desired dual wavelengths change in opposite slopes with the transverse shift of the filter. Consequently, powers of the two wavelengths change in opposite directions. A branch power, oppositely tunable 1062 and 1083 nm dual-wavelength laser is successfully demonstrated. Design principles of the linear variable Fabry-Perot filter used as an output coupler are discussed. Advantages of the method are summarized.

  14. Study of WDM polymer planar curved waveguide couplers

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled mode theory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyzed. The results show that CWC can accommodate wider multiplexing bandwidth than parallel straight waveguide coupler (SWC) due to the compensation effect of the effective coupling length. The two variables, curvature radius and minimum spacing, increase the design flexibility of the waveguide device. A 4-channel wavelength division multiplexing (WDM) system based on CWC is designed. The deviation of the center wavelength, due to the errors of curvature radius and minimum spacing during fabrication process, is investigated. The smaller the curvature radius and the minimum spacing are, the larger the central wavelength deviation caused by the error of the curvature radius and the minimum spacing is, which provides some useful theoretical basis for the design and the fabrication of polymer waveguide devices.

  15. Power Coupler Simulations for the Linac4 Drift Tube Linac

    CERN Document Server

    De Michele, G; Ramberger, S

    2011-01-01

    The power coupler is a crucial element in the design of an RF cavity. Power from an RF source is transported towards the cavity by a waveguide and transferred into the cavity by means of a power coupler that is adapted to both the transport mode in the waveguide and the principal resonant mode in the cavity. In the case of Linac4, a rectangular half-height waveguide (WG) WR2300 is used and the connection from this WG to the cavity is achieved by iris coupling through an interconnecting waveguide (IWG) in the tank wall. In this note simulations and measurements on a prototype and studies on Tank1 of the Linac4 Drift Tube Linac (DTL) are discussed in order to define the dimensions of this IWG such that it optimises the power transfer into the cavity.

  16. Compact dipole nanoantenna coupler to plasmonic slot waveguide

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Malureanu, Radu; Biagi, Giulio;

    2012-01-01

    Optical nanoantennas can be used for coupling radiation to or from waveguides in analogy to micro- and radio-wave systems. In this letter we provide a systematic description of the design approaches for a coupler to a plasmonic slot waveguide in the telecom range around 1.55 µm with realistic...... excitation from a lensed optical fiber. We show that the best coupling efficiency of 26% can be achieved by utilizing a dipole antenna with side and bottom reflectors, and such coupling efficiency is 185 times larger than for the bare waveguide. The nanoantenna coupler provides a compact interface between...... an optical fiber and a plasmonic slot waveguide for future optical integrated circuits....

  17. Direct Adaptive Fuzzy Sliding Mode Control with Variable Universe Fuzzy Switching Term for a Class of MIMO Nonlinear Systems

    Directory of Open Access Journals (Sweden)

    Guo Haigang

    2012-01-01

    Full Text Available Combining adaptive fuzzy sliding mode control with fuzzy or variable universe fuzzy switching technique, this study develops two novel direct adaptive schemes for a class of MIMO nonlinear systems with uncertainties and external disturbances. The proposed control schemes consist of fuzzy equivalent control terms, fuzzy switching control terms (in scheme one or variable universe fuzzy switching control terms (in scheme two, and compensation control terms. The compensation control terms are used to relax the assumption on fuzzy approximation error. Based on Lyapunov stability theory, the parameters update laws are adaptively tuned online and the global asymptotic stability of the closed-loop system can be guaranteed. The major contribution of this study is to develop a novel framework for designing direct adaptive fuzzy sliding mode control scheme facing model uncertainties and external disturbances. The derived schemes can effectively solve the chattering problem and the equivalent control calculation in that environment. Simulation results performed on a two-link robotic manipulator demonstrate the feasibility of the proposed control schemes.

  18. HOM Coupler Notch Filter Tuning for the European XFEL Cavities

    OpenAIRE

    Sulimov, Alexey

    2015-01-01

    The notch filter (NF) tuning prevents the extraction of fundamental mode (1.3 GHz) RF power through Higher Order Modes (HOM) couplers. The procedure of NF tuning was optimized at the beginning of serial European XFEL cavities production. It allows keeping the filter more stable against temperature and pressure changes during cavity cool down. Some statistics of NF condition during cavities and modules cold tests is presented.

  19. High Strain-Rate Testing of Mechanical Couplers

    Science.gov (United States)

    2009-09-01

    tensile strength equal to or greater than that of the control bar but did not achieve the ductility of the control bar. Specimen UHC 9 failed close to...than the Grade 60 bar, but only slightly so at the rapid rate. Upset head system The upset head coupler ( UHC ) system performed very well under the...average performance of the UHC system under the intermediate strain-rate loading condition produced 99% of the dynamic ultimate strength, 61% of the

  20. Efficient Coupler for a Bessel Beam Dispersive Element

    Science.gov (United States)

    Savchenkov, Anatoliy; Iltchenko, Vladimir; Matsko, Andrey; Le, Thanh; Yu, nan; Maleki, Lute

    2008-01-01

    A document discusses overcoming efficient optical coupling to high orbital momentum modes by slightly bending the taper dispersive element. This little shape distortion is not enough to scramble the modes, but it allows the use of regular, free-beam prism coupling, fiber coupling, or planar fiber on-chip coupling with, ultimately, 100 percent efficiency. The Bessel-beam waveguide is bent near the contact with the coupler, or a curved coupler is used. In this case, every Bessel-beam mode can be successfully coupled to a collimated Gaussian beam. Recently developed Bessel-beam waveguides allow long optical delay and very high dispersion. Delay values may vary from nanoseconds to microseconds, and dispersion promises to be at 100 s/nm. Optical setup consisted of a red laser, an anamorphic prism pair, two prism couplers, and a bent, single-mode fiber attached to prisms. The coupling rate increased substantially and corresponded to the value determined by the anamorphic prism pair.

  1. State of the Art Power Couplers for Superconducting RF Cavities

    Energy Technology Data Exchange (ETDEWEB)

    Isidoro Campisi

    2002-08-01

    Simulations are now routinely performed that allow the prediction of electromagnetic, multipacting, thermal, and mechanical properties of couplers. From these studies, better designs have been conceived which can minimize potential problems ahead of construction. Judicious use of materials and the implementation of clean practices and of careful conditioning have gradually increased the power levels at which couplers can safely operate. Machine operation at hundreds of kilowatts has been achieved in CW at KEK and Cornell, and in a pulsed mode at the TESLA Test Facility (TTF). Test stand operations in CW at the megawatt level (Accelerator for the Production of Tritium) and in pulse mode at a peak power of 2 MW (Spallation Neutron Source, TTF version II) have been achieved. The recent progress indicates that the understanding of the behavior of fundamental power couplers is rapidly increasing and that optimal designs are being developed which will allow in the future to attain routine attainment of the megawatt power levels necessary for high-beam-power machines under construction and under study.

  2. DESIGN OF HYBRID COUPLER CONNECTED SQUARE ARRAY PATCH ANTENNA FOR Wi-Fi APPLICATIONS

    Directory of Open Access Journals (Sweden)

    A. Sahaya Anselin Nisha

    2012-01-01

    Full Text Available Microstrip patch antennas being popular because of light weight, low volume, thin profile configuration which can be made conformal. Wireless communication systems applications circular polarization antenna is placing vital role. In this study we introduce a new technique to produce circular polarization. Hybrid coupler is directly connected to microstrip antenna to get circular polarization. Also gain is further increased by introducing antenna array technique. Each square in array having length of 4.6mm patch is having thickness of 0.381mm and the dielectric material used FR4. The designed antenna having high gain of 6.26dB and directivity of 5.11dB at the resonant frequency of 3.7GHz. Simulation results shows that the designed antenna characteristic is suitable for Wi-Fi applications.

  3. A fiber-integrated optical component fabricated via photopolymerization: Mode-selective grating coupler

    Science.gov (United States)

    Sümer, Can; Dinleyici, M. Salih

    2013-11-01

    We demonstrate a mode-selective directional coupler based on a grating structure, which is fabricated by laser direct-writing on a photopolymer thin film. The device is implemented on the flat planar surface of the D-Fiber, enabling fiber integration, where an Acrylamide/Polyvinyl Alcohol based photopolymer material is used in the fabrication of the device. While the refractive index modulation properties of the polymer material are well known, surface relief and corrugation properties due to photopolymerization are investigated in this study. Theoretical model of the device is presented together with the optimization and simulation results of the final device; experimental results have been found to be in good agreement with simulations.

  4. Comparison of sound transmission in human ears and coupler loaded by audiometric earphones

    DEFF Research Database (Denmark)

    Ciric, Dejan; Hammershøi, Dorte

    2005-01-01

    earphones, which is related to coupling of these earphones to human ears and to the coupler. This is done by measurements of the transfer functions from input voltage of the earphone terminals to the entrance of the ear canal in two situations: open, and blocked. Similar measurements were carried out......The thresholds of hearing are usually determined using audiometric earphones. They are calibrated by means of a standardized acoustical coupler. In order to have determined thresholds independent of the earphone type, the coupler should approximate the average human ear closely. Nevertheless...... in the coupler, but since the "ear canal entrance" is not well-defined for the coupler, the mentioned measurements were done at different depths in the coupler. The sound transmission and coupling were described in terms of the pressure division at the entrance of the ear canal and the transmissions in human...

  5. Inexpensive 3dB coupler for POF communication by injection-molding production

    Science.gov (United States)

    Haupt, M.; Fischer, U. H. P.

    2011-01-01

    POFs (polymer optical fibers) gradually replace traditional communication media such as copper and glass within short distance communication systems. Primarily, this is due to their cost-effectiveness and easy handling. POFs are used in various fields of optical communication, e.g. the automotive sector or in-house communication. So far, however, only a few key components for a POF communication network are available. Even basic components, such as splices and couplers, are fabricated manually. Therefore, these circumstances result in high costs and fluctuations in components' performance. Available couplers have high insertion losses due to their manufacturing method. This can only be compensated by higher power budgets. In order to produce couplers with higher performances new fabrication methods are indispensable. A cheap and effective way to produce couplers for POF communication systems is injection molding. The paper gives an overview of couplers available on market, compares their performances, and shows a way to produce couplers by means of injection molding.

  6. Circuital Model for Post Coupler Stabilization in a Drift Tube Linac

    CERN Document Server

    Grespan, F; Ramberger, S; Vretenar, M

    2010-01-01

    Linac4 Drift Tube Linac (DTL) cavities will be equipped with Post Couplers (PCs) for field stabilization. The study presented in this paper starts with the analysis of 2D and 3D simulations of post couplers in order to develop an equivalent circuit model which can explain the post coupler stabilization working principle and define a tuning strategy for DTL cavities. Simulations and equivalent circuit results have been verified by measurements on the Linac4 DTL prototypes at CERN.

  7. Direct observation of nonlinear coupling in wave turbulence at the surface of water and relevance of approximate resonances

    Science.gov (United States)

    Aubourg, Quentin; Mordant, Nicolas

    2016-04-01

    energy cascade is clearly observed consistently with previous measurements. A large amount of data permits us to use higher order statistical tools to investigate directly the resonant interactions. We observe a strong presence of triadic interactions in our system, confirming the foundations of the weak wave turbulence theory. A significant part of these interactions are non-local and enable coupling between capillary and gravity waves. We also emphasize the role of approximate resonances that are made possible by the nonlinear spectral widening. The quasi-resonances increase significantly the number of wave interactions and in particular open the possibility of observing 3-wave coupling among gravity waves although 3-wave exact resonances are prohibited. These effects are being currently investigated in a larger size experiment using a 13m in diameter wave flume. Our observation raise the question of the importance of these approximate resonances of gravity waves in energy transfers both in the theory and in the ocean.

  8. Direct control of stabilization for nonlinear systems using power state feedback; Hisenkei system no beki jotai feedback ni yoru chokusetsutekina anteika seigyo

    Energy Technology Data Exchange (ETDEWEB)

    Okubo, S. [Yamagata Univ. (Japan)

    1998-11-30

    The design method for stabilization of nonlinear systems by direct feedback without using evaluation function is shown. This method is a very important controlling method which is the basis for nonlinear system control, and it is expected to be applied to very wide fields. It is made clear that numerical solution is not possible because the number of equations exceeds that of variables in the extended Lyapunov equation which becomes an equation for the design. There is no concept of pole of linear system in nonlinear systems although stabilization of nonlinear system is natural extension of stabilization of linear system in case of using Lyapunov function. Numerical difficulty is avoided by the use of genetic algorithm in the design calculation, and strict designing with finite degree becomes possible as a result. This method can design strictly nonlinear feedback control law of bounded power degree to stabilize globally nonlinear system of odd highest degree polynomial. The effectiveness of this system is shown an instance of numerical calculation. 5 refs., 6 figs.

  9. Ultra-low-loss inverted taper coupler for silicon-on-insulator ridge waveguide

    DEFF Research Database (Denmark)

    Pu, Minhao; Liu, Liu; Ou, Haiyan;

    2010-01-01

    An ultra-low-loss coupler for interfacing a silicon-on-insulator ridge waveguide and a single-mode fiber in both polarizations is presented. The inverted taper coupler, embedded in a polymer waveguide, is optimized for both the transverse-magnetic and transverse-electric modes through tapering...... the width of the silicon-on-insulator waveguide from 450 nm down to less than 15 nm applying a thermal oxidation process. Two inverted taper couplers are integrated with a 3-mm long silicon-on-insulator ridge waveguide in the fabricated sample. The measured coupling losses of the inverted taper coupler...

  10. Simulation of the RF Coupler for TRIUMF ISAC-II Superconducting Quarter Wave Resonators

    CERN Document Server

    Zvyagintsev, V

    2004-01-01

    The inductive RF coupler for the TRIUMF ISAC-II 106 MHz superconducting accelerating quarter wave resonators was used as a basis for the simulation model of stationary transmission processes of RF power and thermal fluxes. Electromagnetic simulation of the coupler was done with ANSOFT HFSS code. Transmission line theory was used for electromagnetic wave calculations along the drive line to the Coupler. An analogy between electric and thermal processes allows the thermal calculations to be expressed in terms of electrical circuits. The data obtained from the simulation are compared to measured values on the RF coupler.

  11. High power conditioning of the input coupler for BEPCⅡ superconducting cavity

    Institute of Scientific and Technical Information of China (English)

    PAN Wei-Min; HUANG Tong-Ming; MA Qiang; WANG Guang-Wei; SUN Yi; SHA Peng; LI Zhong-Quan; LIN Hai-Ying; XU Bo

    2008-01-01

    High power conditioning of the input coupler for BEPCⅡ supercOnducting cavity has been performed.After room temperature conditioning,the RF power of 150 kW with continuous wave at standing wave mode passed through the coupler without any problem.Meanwhile,a series of methods have also been studied to improve the performance of the coupler during the beam operation.Up to now,the input coupler can feed a RF power up to 100 kW stably with high current of 250 mA at 2.5 GeV.

  12. Using Directional Diffusion Coefficients for Nonlinear Diffusion Acceleration of the First Order SN Equations in Near-Void Regions

    Energy Technology Data Exchange (ETDEWEB)

    Schunert, Sebastian; Hammer, Hans; Lou, Jijie; Wang, Yaqi; Ortensi, Javier; Gleicher, Frederick; Baker, Benjamin; DeHart, Mark; Martineau, Richard

    2016-11-01

    The common definition of the diffusion coeffcient as the inverse of three times the transport cross section is not compat- ible with voids. Morel introduced a non-local tensor diffusion coeffcient that remains finite in voids[1]. It can be obtained by solving an auxiliary transport problem without scattering or fission. Larsen and Trahan successfully applied this diffusion coeffcient for enhancing the accuracy of diffusion solutions of very high temperature reactor (VHTR) problems that feature large, optically thin channels in the z-direction [2]. It is demonstrated that a significant reduction of error can be achieved in particular in the optically thin region. Along the same line of thought, non-local diffusion tensors are applied modeling the TREAT reactor confirming the findings of Larsen and Trahan [3]. Previous work of the authors have introduced a flexible Nonlinear-Diffusion Acceleration (NDA) method for the first order S N equations discretized with the discontinuous finite element method (DFEM), [4], [5], [6]. This NDA method uses a scalar diffusion coeffcient in the low-order system that is obtained as the flux weighted average of the inverse transport cross section. Hence, it su?ers from very large and potentially unbounded diffusion coeffcients in the low order problem. However, it was noted that the choice of the diffusion coeffcient does not influence consistency of the method at convergence and hence the di?usion coeffcient is essentially a free parameter. The choice of the di?usion coeffcient does, however, affect the convergence behavior of the nonlinear di?usion iterations. Within this work we use Morel’s non-local di?usion coef- ficient in the aforementioned NDA formulation in lieu of the flux weighted inverse of three times the transport cross section. The goal of this paper is to demonstrate that significant en- hancement of the spectral properties of NDA can be achieved in near void regions. For testing the spectral properties of the NDA

  13. Nonlinear Reconstruction

    CERN Document Server

    Zhu, Hong-Ming; Pen, Ue-Li; Chen, Xuelei; Yu, Hao-Ran

    2016-01-01

    We present a direct approach to non-parametrically reconstruct the linear density field from an observed non-linear map. We solve for the unique displacement potential consistent with the non-linear density and positive definite coordinate transformation using a multigrid algorithm. We show that we recover the linear initial conditions up to $k\\sim 1\\ h/\\mathrm{Mpc}$ with minimal computational cost. This reconstruction approach generalizes the linear displacement theory to fully non-linear fields, potentially substantially expanding the BAO and RSD information content of dense large scale structure surveys, including for example SDSS main sample and 21cm intensity mapping.

  14. Back-reflecting interferometeric sensor based on grating coupler on a planar waveguide

    CERN Document Server

    Demeter, Anat

    2015-01-01

    We present a one-port sensor based on a single diffraction grating delineated over a planar optical waveguide. Distinctly to previously reported devices, the grating here is used not only as I/O coupler, but also provides a built-in reference beam which is basically unaffected by the sensing process as manifested in changes of the effective refractive index of the waveguide. The sensing process causes two effects simultaneously: a change in the angle of the out-coupled beam and a change in the phase accumulated by that beam. Both changes can be determined by their conjunction with the reference beam back-diffracted directly by the grating. These two effects are expected to have despair sensitivities, the angle changing effect being coarse and the interferometric phase-change effect being highly sensitive. Sensing simultaneously at two different scales will translate into a large sensing dynamic range.

  15. High repetition rate Q-switched radially polarized laser with a graphene-based output coupler

    Energy Technology Data Exchange (ETDEWEB)

    Li, Lifei; Jin, Chenjie; Qi, Mei; Chen, Xiaoming; Ren, Zhaoyu, E-mail: zhengxl@nwu.edu.cn, E-mail: rzy@nwu.edu.cn [National Key Laboratory of Photoelectric Technology and Functional Materials (Culture Base), and Institute of Photonics and Photon-Technology, Northwest University, Xi' an 710069 (China); Zheng, Xinliang, E-mail: zhengxl@nwu.edu.cn, E-mail: rzy@nwu.edu.cn [Department of Physics, Northwest University, Xi' an 710069 (China); Bai, Jintao [National Key Laboratory of Photoelectric Technology and Functional Materials (Culture Base), and Institute of Photonics and Photon-Technology, Northwest University, Xi' an 710069 (China); Department of Physics, Northwest University, Xi' an 710069 (China); Sun, Zhipei [Department of Micro- and Nanosciences, Aalto University, P.O. Box 13500, FI-00076 Aalto (Finland)

    2014-12-01

    We demonstrate a Q-switched radially polarized all-solid-state laser by transferring a graphene film directly onto an output coupler. The laser generates Q-switched radially polarized beam (QRPB) with a pulse width of 192 ns and 2.7 W average output power. The corresponding single pulse energy is up to 16.2 μJ with a high repetition rate of 167 kHz. The M{sup 2} factor and the polarization purity are ∼2.1 and 96%, respectively. Our QRPB source is a simple and low-cost source for a variety of applications, such as industrial material processing, optical trapping, and microscopy.

  16. Design considerations for multi-core optical fibers in nonlinear switching and mode-locking applications

    CERN Document Server

    Nazemosadat, Elham

    2014-01-01

    We explore the practical challenges which should be addressed when designing a multi-core fiber coupler for nonlinear switching or mode-locking applications. The inevitable geometric imperfections formed in these fiber couplers during the fabrication process affect the performance characteristics of the nonlinear switching device. Fabrication uncertainties are tolerable as long as the changes they impose on the propagation constant of the modes are smaller than the linear coupling between the cores. It is possible to reduce the effect of the propagation constant variations by bringing the cores closer to each other, hence, increasing the coupling. However, higher coupling translates into a higher switching power which may not be desirable in some practical situations. Therefore, fabrication errors limit the minimum achievable switching power in nonlinear couplers.

  17. Fiber coupler end face wavefront surface metrology

    Science.gov (United States)

    Compertore, David C.; Ignatovich, Filipp V.; Marcus, Michael A.

    2015-09-01

    Despite significant technological advances in the field of fiber optic communications, one area remains surprisingly `low-tech': fiber termination. In many instances it involves manual labor and subjective visual inspection. At the same time, high quality fiber connections are one of the most critical parameters in constructing an efficient communication link. The shape and finish of the fiber end faces determines the efficiency of a connection comprised of coupled fiber end faces. The importance of fiber end face quality becomes even more critical for fiber connection arrays and for in the field applications. In this article we propose and demonstrate a quantitative inspection method for the fiber connectors using reflected wavefront technology. The manufactured and polished fiber tip is illuminated by a collimated light from a microscope objective. The reflected light is collected by the objective and is directed to a Shack-Hartmann wavefront sensor. A set of lenses is used to create the image of the fiber tip on the surface of the sensor. The wavefront is analyzed by the sensor, and the measured parameters are used to obtain surface properties of the fiber tip, and estimate connection loss. For example, defocus components in the reflected light indicate the presence of bow in the fiber end face. This inspection method provides a contact-free approach for quantitative inspection of fiber end faces and for estimating the connection loss, and can potentially be integrated into a feedback system for automated inspection and polishing of fiber tips and fiber tip arrays.

  18. Fabrication of optical filters based on polymer asymmetric Bragg couplers.

    Science.gov (United States)

    Chuang, Wei-Ching; Lee, An-Chen; Chao, Ching-Kong; Ho, Chi-Ting

    2009-09-28

    In this work, we successfully developed a process to fabricate dual-channel polymeric waveguide filters based on an asymmetric Bragg coupler (ABC) using holographic interference techniques, soft lithography, and micro molding. At the cross- and self-reflection Bragg wavelengths, the transmission dips of approximately -16.4 and -11.5 dB relative to the 3 dB background insertion loss and the 3 dB transmission bandwidths of approximately 0.6 and 0.5 nm were obtained from an ABC-based filter. The transmission spectrum overlaps when the effective index difference between two single waveguides is less than 0.002.

  19. Stratified waveguide grating coupler for normal fiber incidence.

    Science.gov (United States)

    Wang, Bin; Jiang, Jianhua; Chambers, Diana M; Cai, Jingbo; Nordin, Gregory P

    2005-04-15

    We propose a new stratified waveguide grating coupler (SWGC) to couple light from a fiber at normal incidence into a planar waveguide. SWGCs are designed to operate in the strong coupling regime without intermediate optics between the fiber and the waveguide. Two-dimensional finite-difference time-domain simulation in conjunction with microgenetic algorithm optimization shows that approximately 72% coupling efficiency is possible for fiber (core size of 8.3 microm and delta=0.36%) to slab waveguide (1.2-microm core and delta=3.1%) coupling. We show that the phase-matching and Bragg conditions are simultaneously satisfied through the fundamental leaky mode.

  20. Acoustic coupler for acquisition of coronary artery murmurs

    DEFF Research Database (Denmark)

    Zimmermann, Niels Henrik; Schmidt, Samuel; Hansen, John;

    2011-01-01

    in a clinical trial including 463 patients referred for elective coronary angiography. The preliminary results show, that it was possible to record heart sound in the diastolic period with a sound pressure level approximately 30 dB above the noise floor of the microphone and recording system in the frequency......The aim of the study was to design and evaluate a coupler/ microphone system for recording weak murmurs from stenoses in the coronar artery. The suggested design is based on the use of a high quality microphone, coupled to the chest through a small air cavity. Since the determination of the exact...

  1. Seismic Hazard Maps for Seattle, Washington, Incorporating 3D Sedimentary Basin Effects, Nonlinear Site Response, and Rupture Directivity

    Science.gov (United States)

    Frankel, Arthur D.; Stephenson, William J.; Carver, David L.; Williams, Robert A.; Odum, Jack K.; Rhea, Susan

    2007-01-01

    This report presents probabilistic seismic hazard maps for Seattle, Washington, based on over 500 3D simulations of ground motions from scenario earthquakes. These maps include 3D sedimentary basin effects and rupture directivity. Nonlinear site response for soft-soil sites of fill and alluvium was also applied in the maps. The report describes the methodology for incorporating source and site dependent amplification factors into a probabilistic seismic hazard calculation. 3D simulations were conducted for the various earthquake sources that can affect Seattle: Seattle fault zone, Cascadia subduction zone, South Whidbey Island fault, and background shallow and deep earthquakes. The maps presented in this document used essentially the same set of faults and distributed-earthquake sources as in the 2002 national seismic hazard maps. The 3D velocity model utilized in the simulations was validated by modeling the amplitudes and waveforms of observed seismograms from five earthquakes in the region, including the 2001 M6.8 Nisqually earthquake. The probabilistic seismic hazard maps presented here depict 1 Hz response spectral accelerations with 10%, 5%, and 2% probabilities of exceedance in 50 years. The maps are based on determinations of seismic hazard for 7236 sites with a spacing of 280 m. The maps show that the most hazardous locations for this frequency band (around 1 Hz) are soft-soil sites (fill and alluvium) within the Seattle basin and along the inferred trace of the frontal fault of the Seattle fault zone. The next highest hazard is typically found for soft-soil sites in the Duwamish Valley south of the Seattle basin. In general, stiff-soil sites in the Seattle basin exhibit higher hazard than stiff-soil sites outside the basin. Sites with shallow bedrock outside the Seattle basin have the lowest estimated hazard for this frequency band.

  2. Experimental Characterisation of Moreno Cross Slot Couplers for Blass Matrix Design

    Directory of Open Access Journals (Sweden)

    K. Jery Varghese

    1998-10-01

    Full Text Available This paper presents the experimental characterisation of Moreno cross-slot coupler which is the basic building block of multiple beam forming network (Blass matrix. The lack of exact theory of such coupler requires extensive experimental evaluation. A novel test jig has been designed, fabricated and tested for this purpose. The experimental results for different scattering parameters are presented.

  3. Ultra-low loss nano-taper coupler for Silicon-on-Insulator ridge waveguide

    DEFF Research Database (Denmark)

    Pu, Minhao; Liu, Liu; Ou, Haiyan;

    2010-01-01

    A nano-taper coupler is optimized specially for the transverse-magnetic mode for interfacing light between a silicon-on-insulator ridge waveguide and a single-mode fiber. An ultra-low coupling loss of ~0.36dB is achieved for the nano-taper coupler....

  4. Raman probes based on optically-poled double-clad fiber and coupler

    DEFF Research Database (Denmark)

    Brunetti, Anna Chiara; Margulis, Walter; Rottwitt, Karsten

    2012-01-01

    of a sample of dimethyl sulfoxide (DMSO), when illuminating the waveguide with 1064nm laser light. The Raman signal is collected in the inner cladding, from which it is retrieved with either a bulk dichroic mirror or a double-clad fiber coupler. The coupler allows for a substantial reduction of the fiber...

  5. Low insertion loss SOI microring resonator integrated with nano-taper couplers

    DEFF Research Database (Denmark)

    Pu, Minhao; Frandsen, Lars Hagedorn; Ou, Haiyan;

    2009-01-01

    We demonstrate a microring resonator working at TM mode integrated with nano-taper couplers with 3.6dB total insertion loss. The measured insertion loss of the nano-taper coupler was only 1.3dB for TM mode....

  6. Gain characteristics of quantum dot fiber amplifier based on asymmetric tapered fiber coupler

    DEFF Research Database (Denmark)

    Guo, Hairun; Pang, Fufei; Zeng, Xianglong

    2013-01-01

    We theoretically analyzed the gain characteristics of an integrated semiconductor quantum dot (QD) fiber amplifier (SQDFA) by using a 2×2 tapered fiber coupler with a PbS QD-coated layer. The asymmetric structure of the fiber coupler is designed to have a maximum working bandwidth around 1550-nm...

  7. Hybrid Optical Comb Filter with Multi-Port Fiber Coupler for DWDM Optical Network

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Optical comb filters based on multi-port fused fiber couplers are proposed and numerically analyzed, 3-arm MZI composed by 1×7 fiber splitter and 3×3 fiber coupler, and 2-stage cascaded FIR type MZI interleave filter.

  8. Relaxed damage threshold intensity conditions and nonlinear increase in the conversion efficiency of an optical parametric oscillator using a bi-directional pump geometry.

    Science.gov (United States)

    Norris, G; McConnell, G

    2010-03-01

    A novel bi-directional pump geometry that nonlinearly increases the nonlinear optical conversion efficiency of a synchronously pumped optical parametric oscillator (OPO) is reported. This bi-directional pumping method synchronizes the circulating signal pulse with two counter-propagating pump pulses within a linear OPO resonator. Through this pump scheme, an increase in nonlinear optical conversion efficiency of 22% was achieved at the signal wavelength, corresponding to a 95% overall increase in average power. Given an almost unchanged measured pulse duration of 260 fs under optimal performance conditions, this related to a signal wavelength peak power output of 18.8 kW, compared with 10 kW using the traditional single-pass geometry. In this study, a total effective peak intensity pump-field of 7.11 GW/cm(2) (corresponding to 3.55 GW/cm(2) from each pump beam) was applied to a 3 mm long periodically poled lithium niobate crystal, which had a damage threshold intensity of 4 GW/cm(2), without impairing crystal integrity. We therefore prove the application of this novel pump geometry provides opportunities for power-scaling of synchronously pumped OPO systems together with enhanced nonlinear conversion efficiency through relaxed damage threshold intensity conditions.

  9. Note: Compact optical fiber coupler for diamond anvil high pressure cells

    Science.gov (United States)

    Pugh, E.

    2013-10-01

    A compact optical fiber coupler has been developed to allow transmission of light through an optical fiber to and from the high pressure region of a diamond anvil high pressure cell. Despite its small size the coupler has focusing adjustments and optics, which allows the light to be focused precisely on the sample within the pressure cell. The coupler is suitable for a wide range of optical measurements and particularly for high pressure measurements at low temperatures in cryostats with no optical windows. The use of the coupler to determine the pressure in a diamond anvil cell at 1.2 K using the ruby fluorescence spectra of ruby is demonstrated. The small size of the coupler and its construction out of nonmagnetic beryllium copper makes it suitable for use in high magnetic fields and for magnetization experiments.

  10. Stop band characteristics of a TESLA cavity coaxial-type HOM coupler

    Institute of Scientific and Technical Information of China (English)

    WANG Er-Dong; WANG Fang; ZHANG Bao-Cheng; S.Noguchi; K.Watanabe; ZHAO Kui

    2009-01-01

    A TTF-type coaxial higher order modes (HOM) coupler has been used in a TESLA 9 cell cavity. It is impossible to measure the stop band characteristics of the HOM coupler with the cavity. A measurement device for the coaxial transmission line type for the HOM coupler has been designed at Peking University. Experimentally it was shown that the average voltage standing wave ratio of the coaxial transmission line is smaller than 1.08. The experimental results of the stop band characteristics of the TTF-type HOM coupler have been fitted for the simulation. This paper describes the design of the measurement device and discusses the experimental and simulation results of stop band characteristics of the HOM coupler.

  11. Temperature Dependence of Characteristics for Multimode Interference Based 3-dB Coupler in SOI

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The temperature dependence of characteristics for multimode interference(MMI) based 3-dB coupler in silicon-on-insulator is analyzed, which originates from the relatively high thermo-optic coefficient of silicon. For restricted interference 3-dB MMI coupler, the output power uniformity is ideally 0 at room temperature and becomes 0.32dB when temperature rises up to 550K.For symmetric interference 3-dB MMI coupler, the power uniformity keeps ideally 0 due to its intrinsic symmetric interference mechanism. With the temperature rising, the excess loss of the both devices increases. The performance deterioration due to temperature variety is more obvious to restricted interference MMI 3-dB coupler, comparing with that of symmetric interference MMI 3-dB coupler.

  12. MINIATURIZED MICROSTRIP BRANCH-LINE COUPLER WITH GOOD HARMONIC SUPPRESSION PERFORMANCE

    Institute of Scientific and Technical Information of China (English)

    Yang Guo; Li Bo; Kang Wei; Ge Sheng

    2012-01-01

    This paper presents a miniaturized microstrip branch-line coupler with good harmonic suppression performance.The proposed coupler consists of four branch-line sections,each of which is loaded by open-circuit stubs both at the center and the two ends.This type of loading can realize size reduction and harmonic suppression.As an example,a proposed branch-line coupler operating at 1.0 GHz is designed,fabricated and measured.The results show that the proposed branch-line coupler occupies 67% size of a conventional one and has better than 20 dB suppression from 1.9 to 5.8 GHz.Furthermore,the high slop of the transition band ensures good selectivity of the coupler.

  13. Light dynamics in nonlinear trimers ans twisted multicore fibers

    CERN Document Server

    Castro-Castro, Claudia; Srinivasan, Gowri; Aceves, Alejandro B; Kevrekidis, Panayotis G

    2016-01-01

    Novel photonic structures such as multi-core fibers and graphene based arrays present unique opportunities to manipulate and control the propagation of light. Here we discuss nonlinear dynamics for structures with a few (2 to 6) elements for which linear and nonlinear properties can be tuned. Specifically we show how nonlinearity, coupling, and parity-time PT symmetric gain/loss relate to existence, stability and in general, dynamical properties of nonlinear optical modes. The main emphasis of our presentation will be on systems with few degrees of freedom, most notably couplers, trimers and generalizations thereof to systems with 6 nodes.

  14. Stabilizing mechanism and running behavior of couplers on heavy haul trains

    Science.gov (United States)

    Xu, Ziqiang; Wu, Qing; Luo, Shihui; Ma, Weihua; Dong, Xiaoqing

    2014-11-01

    Published studies in regard to coupler systems have been mainly focused on the manufacturing process or coupler strength issues. With the ever increasing of tonnage and length of heavy haul trains, lateral in-train forces generated by longitudinal in-train forces and coupler rotations have become a more and more significant safety issue for heavy haul train operations. Derailments caused by excessive lateral in-train forces are frequently reported. This article studies two typical coupler systems used on heavy haul locomotives. Their structures and stabilizing mechanism are analyzed before the corresponding models are developed. Coupler systems models are featured by two distinct stabilizing mechanism models and draft gear models with hysteresis considered. A model set which consists of four locomotives and three coupler systems is developed to study the rotational behavior of different coupler systems and their implications for locomotive dynamics. Simulated results indicate that when the locomotives are equipped with the type B coupler system, locomotives can meet the dynamics standard on tangent tracks; while the dynamics performance on curved tracks is very poor. The maximum longitudinal in-train force for locomotives equipped with the type B coupler system is 2000 kN. Simulations revealed a distinct trend for the type A coupler system. Locomotive dynamics are poorer for the type A case when locomotives are running on tangent tracks, while the dynamics are better for the type A case when locomotives are running on curved tracks. Theoretical studies and simulations carried out in this article suggest that a combination of the two types of stabilizing mechanism can result in a good design which can significantly decrease the relevant derailments.

  15. Stabilizing Mechanism and Running Behavior of Couplers on Heavy Haul Trains

    Institute of Scientific and Technical Information of China (English)

    XU Ziqiang; WU Qing; LUO Shihui; MA Weihua; DONG Xiaoqing

    2014-01-01

    Published studies in regard to coupler systems have been mainly focused on the manufacturing process or coupler strength issues. With the ever increasing of tonnage and length of heavy haul trains, lateral in-train forces generated by longitudinal in-train forces and coupler rotations have become a more and more significant safety issue for heavy haul train operations. Derailments caused by excessive lateral in-train forces are frequently reported. This article studies two typical coupler systems used on heavy haul locomotives. Their structures and stabilizing mechanism are analyzed before the corresponding models are developed. Coupler systems models are featured by two distinct stabilizing mechanism models and draft gear models with hysteresis considered. A model set which consists of four locomotives and three coupler systems is developed to study the rotational behavior of different coupler systems and their implications for locomotive dynamics. Simulated results indicate that when the locomotives are equipped with the type B coupler system, locomotives can meet the dynamics standard on tangent tracks; while the dynamics performance on curved tracks is very poor. The maximum longitudinal in-train force for locomotives equipped with the type B coupler system is 2000 kN. Simulations revealed a distinct trend for the type A coupler system. Locomotive dynamics are poorer for the type A case when locomotives are running on tangent tracks, while the dynamics are better for the type A case when locomotives are running on curved tracks. Theoretical studies and simulations carried out in this article suggest that a combination of the two types of stabilizing mechanism can result in a good design which can significantly decrease the relevant derailments.

  16. RF coupler for high-power CW FEL photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Young, L. M. (Lloyd M.)

    2003-01-01

    A high-current emittance-compensated RF photoinjector is a key enabling technology for a high-power CW FEL. The design presently under way is a 100-mA 2.5-cell {pi}-mode, 700-MHz, normal conducting demonstration CW RF photoinjector. This photoinjector will be capable of accelerating 3 nC per bunch with an emittance at the wiggler less than 10 mm-mrad. The paper presents results for the RF coupling from ridged wave guides to hte photoinjector RF cavity. The LEDA and SNS couplers inspired this 'dog-bone' design. Electromagnetic modeling of the coupler-cavity system has been performed using both 2-D and 3-D frequency-domain calculations, and a novel time-domain approach with MicroWave Studio. These simulations were used to adjust the coupling coefficient and calculate the power-loss distribution on the coupling slot. The cooling of this slot is a rather challenging thermal management project.

  17. Optical true time delay based on contradirectional couplers with single sidewall-modulated Bragg gratings

    Science.gov (United States)

    Wang, Xu; Liao, Shasha; Dong, Jianji

    2016-11-01

    We propose and demonstrate optical true time delay using tapered SOI contradirectional couplers with single sidewallmodulated Bragg gratings. The contradirectional couplers consist of two tapered rib waveguides with different width, and the Bragg gratings are modulated in the inner sidewall of the wider one. The optical signal is launched from the wide waveguide and coupled to the narrow waveguide through the Bragg gratings structure. Along the direction of light propagation, the waveguide width varies linearly, so the reflection wavelength is different at different positions. Therefore, linear delay line can be realized within the grating passband using the present structure. In the simulation, grating period is 310nm and grating number is 2400, corresponding to the grating length of 744μm. Using 2.5D FDTD simulation, the current structure can realize optical group delay of 20ps within bandwidth of 18nm. The proposed device is fabricated on a 220nm SOI chip with Electron Beam Lithography (EBL) and Inductively Coupled Plasma (ICP) etching. In the experiment, continuous light is modulated by 10GHz radio-frequency signal and travel through the chip, which is finally detected by the oscilloscope. By adjusting the wavelength of input light, group delay of different wavelength are recorded by the oscilloscope. The experimental results show that group delay of 28ps is realized within the bandwidth of 20nm. In the end, the drift of the reflection spectrum and delay lines under different temperature are analyzed. The reflection spectrum drifts 0.1nm/°C and causes redshift of the corresponding delay line.

  18. Hybrid germanium iodide perovskite semiconductors: active lone pairs, structural distortions, direct and indirect energy gaps, and strong nonlinear optical properties.

    Science.gov (United States)

    Stoumpos, Constantinos C; Frazer, Laszlo; Clark, Daniel J; Kim, Yong Soo; Rhim, Sonny H; Freeman, Arthur J; Ketterson, John B; Jang, Joon I; Kanatzidis, Mercouri G

    2015-06-03

    The synthesis and properties of the hybrid organic/inorganic germanium perovskite compounds, AGeI3, are reported (A = Cs, organic cation). The systematic study of this reaction system led to the isolation of 6 new hybrid semiconductors. Using CsGeI3 (1) as the prototype compound, we have prepared methylammonium, CH3NH3GeI3 (2), formamidinium, HC(NH2)2GeI3 (3), acetamidinium, CH3C(NH2)2GeI3 (4), guanidinium, C(NH2)3GeI3 (5), trimethylammonium, (CH3)3NHGeI3 (6), and isopropylammonium, (CH3)2C(H)NH3GeI3 (7) analogues. The crystal structures of the compounds are classified based on their dimensionality with 1–4 forming 3D perovskite frameworks and 5–7 1D infinite chains. Compounds 1–7, with the exception of compounds 5 (centrosymmetric) and 7 (nonpolar acentric), crystallize in polar space groups. The 3D compounds have direct band gaps of 1.6 eV (1), 1.9 eV (2), 2.2 eV (3), and 2.5 eV (4), while the 1D compounds have indirect band gaps of 2.7 eV (5), 2.5 eV (6), and 2.8 eV (7). Herein, we report on the second harmonic generation (SHG) properties of the compounds, which display remarkably strong, type I phase-matchable SHG response with high laser-induced damage thresholds (up to ∼3 GW/cm(2)). The second-order nonlinear susceptibility, χS(2), was determined to be 125.3 ± 10.5 pm/V (1), (161.0 ± 14.5) pm/V (2), 143.0 ± 13.5 pm/V (3), and 57.2 ± 5.5 pm/V (4). First-principles density functional theory electronic structure calculations indicate that the large SHG response is attributed to the high density of states in the valence band due to sp-hybridization of the Ge and I orbitals, a consequence of the lone pair activation.

  19. Measuring the performance of the coaxial HOM coupler on a 2-cell TESLA-shape copper cavity

    Institute of Scientific and Technical Information of China (English)

    WANG Fang; WANG Er-Dong; ZHANG Bao-Cheng; ZHAO Kui

    2009-01-01

    Coaxial High Order Mode (HOM) couplers have been fabricated at Peking University and their RF performance has been measured on a test device consisting of a coaxial transmission line and a 2-cellTESLA-shape copper cavity. The test results on the 2-cell TESLA-shape copper cavity with HOM couplers indicate that the coupler can cut off the fundamental mode TM010 and absorb HOMs effectively after a careful adjustment. The optimal angle of the HOM coupler with the beam tube is found. The initial test results of HOM couplers are presented in this paper.

  20. The linear and nonlinear optical effects of white light

    Institute of Scientific and Technical Information of China (English)

    QI XinYuan; LIU SiMin; GUO Ru; LU Yi; GAO YuanMei; LIU ZhaoHong; HUANG ChunFu; ZHANG XiaoHua; ZHU Nan; XU JingJun

    2009-01-01

    An overview of our research group's experimental and theoretical developments is provided on the linear and nonlinear optical effects of white light since 2003. Their work includes the experimental researches on the white light one-dimensional photovoltaic dark spatial solitons and the waveguides and directional couplers induced by them, the circular and elliptic white-light dark spatial solitons and the white-light photorefractive phase masks, two-dimensional white-light photonic lattices and the applications of the white-light dark spatial solitons in the digital image transmission field, the interaction between the two-dimensional white-light dark spatial solitons to enhance or to improve the correlateddegree of the white light through the interaction between the white-light beam and coherent dark spatial solitons, the interaction between the one-or two-dimensional white-light dark spatial solitons and the two-dimensional white-light photonic lattices, respectively. We also numerically simulate the interaction between two or more partially incoherent bright spatial solitons and the white bright spatial soliton pairs in the saturated logarithmic nonlinear medium. We have observed experimentally for the first time,the modulation instability of the coherent light and white light, respectively, in self-defocusing medium and so on.

  1. The linear and nonlinear optical effects of white light

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    An overview of our research group’s experimental and theoretical developments is provided on the linear and nonlinear optical effects of white light since 2003. Their work includes the experimental researches on the white light one-dimensional photovoltaic dark spatial solitons and the waveguides and directional couplers induced by them, the circular and elliptic white-light dark spatial solitons and the white-light photorefractive phase masks, two-dimensional white-light photonic lattices and the applications of the white-light dark spatial solitons in the digital image transmission field, the interaction between the two-dimensional white-light dark spatial solitons to enhance or to improve the correlated degree of the white light through the interaction between the white-light beam and coherent dark spatial solitons, the interaction between the one- or two-dimensional white-light dark spatial solitons and the two-dimensional white-light photonic lattices, respectively. We also numerically simulate the interaction between two or more partially incoherent bright spatial solitons and the white bright spatial soliton pairs in the saturated logarithmic nonlinear medium. We have observed experimentally for the first time, the modulation instability of the coherent light and white light, respectively, in self-defocusing medium and so on.

  2. A modified NARMAX model-based self-tuner with fault tolerance for unknown nonlinear stochastic hybrid systems with an input-output direct feed-through term.

    Science.gov (United States)

    Tsai, Jason S-H; Hsu, Wen-Teng; Lin, Long-Guei; Guo, Shu-Mei; Tann, Joseph W

    2014-01-01

    A modified nonlinear autoregressive moving average with exogenous inputs (NARMAX) model-based state-space self-tuner with fault tolerance is proposed in this paper for the unknown nonlinear stochastic hybrid system with a direct transmission matrix from input to output. Through the off-line observer/Kalman filter identification method, one has a good initial guess of modified NARMAX model to reduce the on-line system identification process time. Then, based on the modified NARMAX-based system identification, a corresponding adaptive digital control scheme is presented for the unknown continuous-time nonlinear system, with an input-output direct transmission term, which also has measurement and system noises and inaccessible system states. Besides, an effective state space self-turner with fault tolerance scheme is presented for the unknown multivariable stochastic system. A quantitative criterion is suggested by comparing the innovation process error estimated by the Kalman filter estimation algorithm, so that a weighting matrix resetting technique by adjusting and resetting the covariance matrices of parameter estimate obtained by the Kalman filter estimation algorithm is utilized to achieve the parameter estimation for faulty system recovery. Consequently, the proposed method can effectively cope with partially abrupt and/or gradual system faults and input failures by the fault detection.

  3. Analysis of Nonlinear Soil-Structure Interaction Effects on the response of Three-Dimensional Frame Structures using a One-Direction Three-ComponentWave Propagation Model

    CERN Document Server

    d'Avila, Maria Paola Santisi

    2016-01-01

    In this paper, a model of one-directional propagation of three-component seismic waves in a nonlinear multilayered soil profile is coupled with a multi-story multi-span frame model to consider, in a simple way, the soil-structure interaction modelled in a finite element scheme. Modeling the three-component wave propagation enables the effects of a soil multiaxial stress state to be taken into account. These reduce soil strength and increase nonlinear effects, compared with the axial stress state. The simultaneous propagation of three components allows the prediction of the incident direction of seismic loading at the ground surface and the analysis of the behavior of a frame structure shaken by a three-component earthquake. A parametric study is carried out to characterize the changes in the ground motion due to dynamic features of the structure, for different incident wavefield properties and soil nonlinear effects. A seismic response depending on parameters such as the frequency content of soil and structur...

  4. HF power couplers for pulsed superconducting cavity resonators; Coupleurs de puissance HF pour cavites supraconductrices en mode pulse

    Energy Technology Data Exchange (ETDEWEB)

    Jenhani, Hassen [Laboratoire de l' Accelerateur Lineaire, IN2P3-CNRS et Universite de Paris-Sud, BP 34, F-91898 Orsay Cedex (France)

    2006-11-15

    Recent years have seen an impressive improvement in the accelerating gradients obtained in superconducting cavities. Consequently, such cavities have become attractive candidates for large superconducting linear accelerator projects such as the European XFEL and the International Linear Collider (ILC). As a result, there is a strong interest in reducing RF conditioning time and improving the performance of the input power couplers for these cavities. The so-called TTF-III input power coupler, adopted for the XFEL superconducting RF cavities are complex components. In order to better understand the behavior of this component we have performed a series of experiments on a number of such couplers. Initially, we developed a fully automated RF high power test stand for coupler conditioning procedure. Following this, we performed a series of coupler conditioning tests. This has allowed the study of the coupler behavior during processing. A number of experiments were carried out to evaluate the in-situ baking effect on the conditioning time. Some of the conditioned couplers were sent to DESY in order to be tested on 9-cells TESLA cavities under cryogenic conditions. These tests have shown that the couplers in no way limit the cavity performance, even up to gradients of 35 MV/m. The main objective of our coupler studies was the reduction of their conditioning time, which represents one of the most important criteria in the choice of coupler for high energy linacs. Excellent progress in reducing the conditioning time has been demonstrated by making appropriate modifications to the conditioning procedure. Furthermore, special attention was paid to electron generation processes in the couplers, via multipacting. Simulations of this process were made on both the TTF-III coupler and on a new coupler prototype, TTF-V. Experiments aimed at suppressing multipacting were also successfully achieved by using a DC bias on the inner conductor of the co-axial coupler. (author)

  5. Optical trimer: A theoretical physics approach to waveguide couplers

    CERN Document Server

    Stoffel, A; Rodríguez-Lara, B M

    2016-01-01

    We study electromagnetic field propagation through an ideal, passive, triangular three-waveguide coupler using a symmetry based approach to take advantage of the underlying $SU(3)$ symmetry. The planar version of this platform has proven valuable in photonic circuit design providing optical sampling, filtering, modulating, multiplexing, and switching. We show that a group-theory approach can readily provide a starting point for design optimization of the triangular version. Our analysis is presented as a practical tutorial on the use of group theory to study photonic lattices for those not familiar with abstract algebra methods. In particular, we study the equilateral trimer to show the relation of pearl-necklace arrays with the Discrete Fourier Transform due to their cyclic group symmetry, and the isosceles trimer to show its relation with the golden ratio and its ability to provide stable output at a single waveguide. We also study the propagation dependent case of an equilateral trimer that linearly increa...

  6. High-refractive-index measurement with an elastomeric grating coupler

    Science.gov (United States)

    Kocabas, Askin; Ay, Feridun; Dâna, Aykutlu; Kiyat, Isa; Aydinli, Atilla

    2005-12-01

    An elastomeric grating coupler fabricated by the replica molding technique is used to measure the modal indices of a silicon-on-insulator (SOI) planar waveguide structure. Because of the van der Waals interaction between the grating mold and the waveguide, the elastomeric stamp makes conformal contact with the waveguide surface, inducing a periodic index perturbation at the contact region. The phase of the incident light is changed to match the guided modes of the waveguide. The modal and bulk indices are obtained by measuring the coupling angles. This technique serves to measure the high refractive index with a precision better than 10-3 and allows the elastomeric stamp to be removed without damaging the surface of the waveguide.

  7. Single-mode fibre coupler as refractometer sensor

    Indian Academy of Sciences (India)

    Pabitra Nath; Mridul Buragohain

    2012-12-01

    We report a simple, non-intrusive fibre-optic refractometer sensor for measuring the refractive index of liquid and optically transparent solid medium. Sensing principle of the proposed sensor is based on monitoring the back-reflected light signal through the second input port of a 2 × 1 single-mode fibre coupler when light signal from the output port is focussed at the interface of air and a liquid or solid medium and back-reflected exactly along the same path. Depending on the refractive index of the medium, the amount of back-reflected intensity would vary and in the present work we exploit this principle to measure the refractive index of an optically transparent medium. Variation of refractive index as small as 0.001 RIU can be measured with our proposed sensor.

  8. Hybrid fiber resonator employing LRSPP waveguide coupler for gyroscope

    Science.gov (United States)

    Qian, Guang; Fu, Xing-Chang; Zhang, Li-Jiang; Tang, Jie; Liu, Yi-Ran; Zhang, Xiao-Yang; Zhang, Tong

    2017-01-01

    Polarization error and temperature noise are two main limits to the performance of resonant fiber optic gyroscope (RFOG). To overcome these limits, we demonstrated a hybrid resonator consisting of a polymer-based long-range surface plasmon polariton (LRSPP) waveguide coupler and a silica fiber. Single-polarization property of LRSPP waveguide and the offsetting of the opposite thermo-optical characteristics between the polymer-based LRSPP waveguide and the silica fiber can effectively inhibit both the polarization error and the temperature noise of RFOG. The measured resonance spectrum of the hybrid resonator shows the absence of polarization noise. The temperature dependence of wavelength shift (TDWS) of resonator dropped to about 2 pm/°C, or even to 0 pm/°C with optimal structure, which dramatically improves the temperature stability of gyroscope system. In addition, the hybrid resonator also shows tremendous application potential in rate-grade and tactical-grade gyroscopes. PMID:28117412

  9. Development of Fundamental Power Coupler for C-ADS Superconducting Elliptical cavities

    CERN Document Server

    Gu, Kui-Xiang; Pan, Wei-Min; Huang, Tong-Ming; Ma, Qiang; Meng, Fan-Bo

    2016-01-01

    5-cell elliptical cavities are chosen for the main linac of China Accelerator Driven sub-critical System in the medium energy section. Each cavity is driven by one fundamental power coupler delivering RF power up to 150 kW. A single window, coaxial type coupler satisfying high power requirements, class 10 clean room assembly with cavity and low heat load simultaneously was designed. This paper gives the details of RF design, external Q calculation and thermal analysis as well as multipacting simulations of the coupler.

  10. Carbon dioxide laser fabrication of fused-fiber couplers and tapers.

    Science.gov (United States)

    Dimmick, T E; Kakarantzas, G; Birks, T A; Russell, P S

    1999-11-20

    We report the development of a fiber taper and fused-fiber coupler fabrication rig that uses a scanning, focused, CO(2) laser beam as the heat source. As a result of the pointlike heat source and the versatility associated with scanning, tapers of any transition shape and uniform taper waist can be produced. Tapers with both a linear shape and an exponential transition shape were measured. The taper waist uniformity was measured and shown to be better than +/-1.2%. The rig was also used to make fused-fiber couplers. Couplers with excess loss below -0.1 dB were routinely produced.

  11. Switching of transmission resonances in a two-channels coupler: A Boundary Wall Method scattering study

    Science.gov (United States)

    Nunes, A.; Zanetti, F. M.; Lyra, M. L.

    2016-10-01

    In this work, we study the transmission characteristics of a two-channels coupler model system using the Boundary Wall Method (BWM) to determine the solution of the corresponding scattering problem of an incident plane wave. We show that the BWM provides detailed information regarding the transmission resonances. In particular, we focus on the case of single channel input aiming to explore the energy switching performance of the coupler. We show that the coupler geometry can be tailored to allow for the first transmission resonances to be predominantly transmitted on specific output channels, an important characteristic for the realization of logical operations.

  12. ANSYS modeling of thermal contraction of SPL HOM couplers during cool-down

    CERN Document Server

    Papke, K

    2016-01-01

    During the cool-down the HOM coupler as well as the cavity inside the cryo module experience a thermal contraction. For most materials between room temperature and liquid helium temperatures, the changes in dimension are in the order of a few tenths of a percent change in volume. This paper presents the effect of thermal contraction on the RF transmission behavior of HOM couplers, and in particular the influence on its notch filter. Furthermore the simulation process with APDL is explained in detail. Conclusions about the necessary tuning range of the notch filter are made which is especially a concern for couplers with only notch filter.

  13. A Novel Ku-Band/Ka-Band and Ka-Band/E-Band Multimode Waveguide Couplers for Power Measurement of Traveling-Wave Tube Amplifier Harmonic Frequencies

    Science.gov (United States)

    Wintucky, Edwin G.; Simons, Rainee N.

    2015-01-01

    This paper presents the design, fabrication and test results for a novel waveguide multimode directional coupler (MDC). The coupler, fabricated from two dissimilar frequency band waveguides, is capable of isolating power at the second harmonic frequency from the fundamental power at the output port of a traveling-wave tube (TWT) amplifier. Test results from proof-of-concept demonstrations are presented for a Ku-band/Ka-band MDC and a Ka-band/E-band MDC. In addition to power measurements at harmonic frequencies, a potential application of the MDC is in the design of a satellite borne beacon source for atmospheric propagation studies at millimeter-wave (mm-wave) frequencies (Ka-band and E-band).

  14. 一类带有未知控制方向的非线性系统的适应镇定问题%A Control of Uncertain Nonlinear Systems with Unknown Control Direction Via Adaptive Backstepping

    Institute of Scientific and Technical Information of China (English)

    郑兆顺

    2007-01-01

    The adaptive stabilization problem of nonlinear systems are studied. For a class of uncertain nonlinear systems with unknown control direction, we proposed a robust adaptive backstepping scheme with σ-modification by introducing Nussbaum function and Backstepping methods, and proved that all the signals of the closed-loop systems are bounded.

  15. New Materials Directions for the Realization of Ultra-High Performance 3rd Order Non-Linear Optical Organics

    Science.gov (United States)

    2015-03-13

    number and part number, if applicable. On classified documents, enter the title classification in parentheses. Sa. CONTRACT NUMBER. Enter all...Enter security classification in accordance with security classification regulations, e.g. U, C, S, etc. If this form contains classified ...enhancement of the Cy-TICT nonlinear response. Orbital hybridization also resulted in spectral shifts of the resonances, so there is an exciting

  16. Engineering Study of Crab Cavity HOM Couplers for LHC High Luminosity Upgrade

    CERN Document Server

    Park, Hyekyung; Delayen, Jean Roger; De Silva, S U; Li, Z; Nicol, T H; Capelli, Teddy; Templeton, Niklas John

    2015-01-01

    The LHC is planning to employ crab cavities for the high luminosity upgrade. Old Dominion University and SLAC National Laboratory are developing a crab cavity completed with the HOM damping couplers [1]. The HOM couplers are coaxial type and perform over broadband up to 2 GHz. The amount of extracted power requires active cooling using liquid helium. The electromagnetic study has provided expected power dissipation on the coupler. Correlations between the fabrication tolerance and its damping performance have been studied and the results are providing guidelines on how to manufacture the HOM couplers. This paper summarizes the engineering studies; mechanical strength as a part of pressure system, thermal stability, and fabrication method to ensure the required tolerance.

  17. Optical Code Generating Device Using 1×N Asymmetric Hollow Waveguide Couplers

    Institute of Scientific and Technical Information of China (English)

    Abang Annuar EHSAN; Sahbudin SHAARI; Mohd Kamil ABD.RAHMAN; Kee Mohd Rafique KEE ZAINAL ABIDIN

    2008-01-01

    An optical code generating device for security access system application is presented. The code generating device constructed using asymmetric hollow optical waveguide coupler design provides a unique series of output light intensities which are successively used as an optical code. The design of the waveguide is made using two major components which are asymmetric Y-junction splitter and a linear taper. Waveguiding is done using a hollow waveguide structure. Construction of higher level 1×N hollow waveguide coupler is done utilizing a basic 1×2 asymmetric waveguide coupler design together with a cascaded design scheme. Non-sequential ray tracing of the asymmetric hollow optical waveguide couplers is performed to predict the optical transmission properties of the waveguide. A representation of the code combination that can be generated from the device is obtained using combinatory number theory.

  18. Conceptual Design Of An Ideal Variable Coupler For Superconducting Radiofrequency 1.3GHz Cavities

    CERN Document Server

    Xu, Chen

    2014-01-01

    Inspired by the development of over-moded RF component as an undulator, we explored another over-moded structure that could serve the variable coupling for SRF purpose. This application is to fulfill variation of S11 from 0 to -20db with CW power of 7 KW. The static heat loss in the coupler is trivial from calculation. An advantage of this coupler is that the thermal isolation between the 2K and 300K section is considerable by vacuum separation. Within this coupler, only a single propagation mode is allowed at each section, and thus, the fact that no energy is converted to high order mode bring almost full match without loss. The analytical and numerical calculation for a two window variable coupler is designed and optimized. A RF power variation is illustrated in the scattering matrix and coupling to cavity is also discussed.

  19. Fast surrogate-assisted simulation-driven optimization of compact microwave hybrid couplers

    Science.gov (United States)

    Kurgan, Piotr; Koziel, Slawomir

    2016-07-01

    This work presents a robust methodology for expedited simulation-driven design optimization of compact microwave hybrid couplers. The technique relies on problem decomposition, and a bottom-up design strategy, starting from the level of basic building blocks of the coupler, and finishing with a tuning procedure that exploits a fast surrogate model of the entire structure. The latter is constructed by cascading local response surface approximations of coupler elementary elements. The cross-coupling effects within the structure are neglected in the first stage of the design process; however, they are accounted for in the tuning phase by means of space-mapping correction of the surrogate. The proposed approach is demonstrated through the design of a compact rat-race and two branch-line couplers. In all cases, the computational cost of the optimization process is very low and corresponds to just a few high-fidelity electromagnetic simulations of respective structures. Experimental validation is also provided.

  20. Fabrication of the high power input coupler for BEPCⅡ superconducting cavities

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The BEPCII storage ring adopts two 500 MHz superconducting cavities (SCC). Each one is equipped with a 500 MHz input power coupler. The coupler is to feed 150 kW power in continuous wave (CW) mode with both standing and traveling wave modes. Due to high power feeding and high frequency of the coupler, its fabrication is a big challenge. The fabrication started with two key components, the window and the antenna. Up to now, two sets including windows and antennas have beam made by IHEP. And a 270 kW RF power in CW has passed through the coupler during the high power test. The fabrication details are presented in this paper.

  1. Experience with the Vibrant Soundbridge RW-Coupler for round window Vibroplasty with tympanosclerosis.

    Science.gov (United States)

    Iwasaki, Satoshi; Suzuki, Hiroaki; Moteki, Hideaki; Miyagawa, Maiko; Takumi, Yutaka; Usami, Shin-Ichi

    2012-06-01

    Abstract Usage of the Vibrant Soundbridge (VSB) with round window (RW)-Coupler placement at the RW has been shown to successfully treat mixed hearing loss. Coupling between the VSB's floating mass transducer (FMT) and the RW membrane is difficult in the case of sclerosis in the RW and drilling down the bony lip until the RW membrane can be seen completely can possibly induce a perilymphatic fistula. A 68-year-old woman who had bilateral mixed hearing loss with sclerosis in the RW due to tympanosclerosis underwent a RW-Vibroplasty with a RW-Coupler. Speech discrimination scores in quiet and noise and functional gain with the VSB with RW-Coupler were better than those using a conventional hearing aid. The results of the present case have shown the feasibility of implanting a VSB with RW-Coupler in patients with mixed hearing loss due to tympanosclerosis.

  2. Relationship between coupler curve properties of a 4-bar linkage and its dimensional types

    Institute of Scientific and Technical Information of China (English)

    CHU; Jinkui; WANG; Liding; WU; Chen

    2004-01-01

    Three types of 4-bar linkages can trace the same coupler curve according to the cognate mechanism law. Based on the investigation of the relationship between dimensions of a linkage and the harmonic component characteristic parameters of the coupler curve of the linkage, it was found that six types of linkages are related to the same coupler curve, and they belong to two groups of cognate mechanisms, in which the coupler curves have the same shape and are symmetric. The relationships among the dimensional types of these six mechanisms are presented. The corresponding examples have also proved these conclusions. This work enriches the cognate mechanism law, and can result in more candidate mechanisms for mechanism dimensional synthesis.

  3. Simulation and experimental research on polymer fiber mode selection polished coupler

    Institute of Scientific and Technical Information of China (English)

    Fan Ji; Lixin Xu; Feng Li; Chun Gu; Kun Gao; Hai Ming

    2008-01-01

    Multimode dispersion is the main obstacle for high bandwidth in multimode optical fiber (MMF) communication system. Mode selection is an effective method to oppress multimode dispersion. We propose and investigate a kind of polymer optical fiber polished coupler. Beam propagation method (BPM) is employed to calculate the coupling coefficient of transmission modes in MMF coupler, and an output pattern from coupling branch is obtained. Analysis and experiment show that this coupler can select certain modes by changing polished depth, contact area, and intersection angle of two branches, which means that the device can be employed both as a mode selector and a sensor. In addition, simulation shows that five times bandwidth enhancement may be realized by selecting modes with the polymer fiber polished coupler.

  4. Characterization of mode group transfer matrix in multimode couplers using spatial light modulation

    Science.gov (United States)

    Stepniak, G.; Bunge, C. A.

    2016-09-01

    In this paper, spatial light modulation is applied to investigate the selective mode properties of multimode fibers (MMF) and MMF couplers. Spatial light modulator is applied only on the MMF input to excite a selected linearly polarized eigenmode of the MMF. At the system output the impulse and frequency response is studied. By an additional time separation of mode groups achieved during propagation in the MMF, a mode group to mode group transfer matrix of the MMF coupler can be obtained.

  5. Extending The Calibration In The Underwater Sound Reference Division (USRD) Reciprocity Coupler To Incorporate Phase

    Science.gov (United States)

    2016-09-01

    data acquisition equipment and phase measurement added. Some errors due to simplifications in the acoustics of the coupler are left to future work...new data acquisition equipment and phase measurement added. Some errors due to simplifications in the acoustics of the coupler are left to future...using the sample clock for sample rate and the convert clock to time the sequential scans over the active channels within each sample. The driver software

  6. Electromagnetic Design of New RF Power Couplers for the S-DALINAC

    CERN Document Server

    Kunze, Marco; Brunken, M; Gräf, H D; Richter, Achim

    2004-01-01

    New rf power couplers for the Superconducting Darmstadt Linear Accelerator (S-DALINAC) injector have to be designed to transfer rf power of up to 2 kW to the electron beam. This allows injector operation at beam currents from 0.15 mA to 0.2 mA and electron energies up to 14 MeV. The new couplers should possibly provide a external Q of 5·106

  7. Power Analysis and Experimental Study of the Fiber Null Coupler with an Acousto-optic Device

    Institute of Scientific and Technical Information of China (English)

    WU Lei; ZHENG Yuan; QI Jiang; PU Hongtu; CHEN Shuqiang

    2002-01-01

    A single-mode fiber acousto-optic (AO) switch based on a null coupler at wavelength of 1.55 μm is reported.According to the coupled mode theory,power distribution of the null coupler with the acoustic-wave is formulated for general case.Excess loss of 0.1 dB and the schematic graph of throughput and coupled power are obtained experimentally.

  8. Localized Mode Enhanced Coupler Based on Quasi-One-Dimensional Photonic Crystal Microstrip

    Institute of Scientific and Technical Information of China (English)

    LI Yun-Hui; JIANG Hai-Tao; HE Li; LI Hong-Qiang; ZHANG Ye-Wen; CHEN Hong

    2004-01-01

    We propose a novel localized mode enhanced (LME) coupler based on quasi-one-dimensional photonic crystal microstrips, which is promising to be applied in wavelength division multiplexed microwave communication systems. Compared to the traditional microstrip coupler, the LME structure has two advantages: high efficiency and frequency selectivity. Even in a relatively far coupling distance, this structure can still achieve a high efficiency about 50%. The frequency selectivity can be realized by simply tuning the distance between two transmission lines.

  9. Driver Steering Control and Full Vehicle Dynamics Study Based on a Nonlinear Three-Directional Coupled Heavy-Duty Vehicle Model

    Directory of Open Access Journals (Sweden)

    S. H. Li

    2014-01-01

    Full Text Available Under complicated driving situations, such as cornering brake, lane change, or barrier avoidance, the vertical, lateral, and longitudinal dynamics of a vehicle are coupled and interacted obviously. This work aims to propose the suitable vehicle and driver models for researching full vehicle dynamics in complicated conditions. A nonlinear three-directional coupled lumped parameters (TCLP model of a heavy-duty vehicle considering the nonlinearity of suspension damping and tire stiffness is built firstly. Then a modified preview driver model with nonlinear time delay is proposed and connected to the TCLP model to form a driver-vehicle closed-loop system. The presented driver-vehicle closed-loop system is evaluated during a double-lane change and compared with test data, traditional handling stability vehicle model, linear full vehicle model, and other driver models. The results show that the new driver model has better lane keeping performances than the other two driver models. In addition, the effects of driver model parameters on lane keeping performances, handling stability, ride comfort, and roll stability are discussed. The models and results of this paper are useful to enhance understanding the effects of driver behaviour on full vehicle dynamics.

  10. The influence of the directional energy distribution on the nonlinear dispersion relation in a random gravity wave field

    Science.gov (United States)

    Huang, N. E.; Tung, C.-C.

    1977-01-01

    The influence of the directional distribution of wave energy on the dispersion relation is calculated numerically using various directional wave spectrum models. The results indicate that the dispersion relation varies both as a function of the directional energy distribution and the direction of propagation of the wave component under consideration. Furthermore, both the mean deviation and the random scatter from the linear approximation increase as the energy spreading decreases. Limited observational data are compared with the theoretical results. The agreement is favorable.

  11. Asymmetric hollow POF coupler design for portable optical access card system

    Science.gov (United States)

    Ehsan, Abang Annuar; Shaari, Sahbudin; Abd Rahman, Mohd Kamil

    2009-05-01

    An optical code generating device using plastic optical fiber (POF) coupler for portable optical access card system is presented. The code generating device constructed using asymmetric hollow POF coupler design provides a unique series of output light intensities which are successively used as an optical code. Each coupler will be assigned with a unique optical code based on the asymmetrical waveguide design. Non-sequential ray tracing simulation of various coupler designs showed a linear relationship between the tap-off ratio (TOFR) and the waveguide tap width. The results for the simulated and fabricated 1x2 asymmetric couplers show the same linear characteristics between the TOFR and the tap width. The simulated devices show a TOFR variation from 18.6% to 49.9% whereas the TOFR for the fabricated metal-based devices varies from 10.7% up to 47.7%, for a tap width of 500 μm to 1 mm. The insertion loss for the 1x2 asymmetric coupler at the tap line varies from 12.7 dB to 21.2 dB whereas for the bus line, the average insertion loss is about 12 dB.

  12. Compact and Wideband Parallel-Strip 180° Hybrid Coupler with Arbitrary Power Division Ratios

    Directory of Open Access Journals (Sweden)

    Leung Chiu

    2013-01-01

    Full Text Available This paper presents a class of wideband 180° hybrid (rat race couplers implemented by parallel-strip line. By replacing the 270° arm of a conventional 180° hybrid coupler by a 90° arm with phase inverter, the bandwidth of the coupler is greatly enhanced and the total circuit size is reduced by almost half. Simple design formulas relating the characteristic impedance of the arms and power division ration are derived. To demonstrate the concept, four couplers with different power division ratios of 1, 2, 4, and 8 were designed, fabricated, and tested. S-parameters of the coupler are simulated and measured with good agreement. All working prototypes operate more than 112% impedance bandwidth with more than 25 dB port-to-port isolation and less than 5° absolute phase imbalance. The proposed 180° hybrid couplers can be employed as a wideband in-phase/differential power divider/combiner, which are essential for many RF and microwave subsystem designs.

  13. Performance optimization of RoF systems using 120° hybrid coupler for OSSB signal against third order intermodulation

    Science.gov (United States)

    Kumar, Parvin; Sharma, Sanjay Kumar; Singla, Shelly

    2016-10-01

    The performance of radio over fiber (RoF) system with dual drive Mach Zehender modulator has been optimized against third order intermodulation distortion by using 120° hybrid coupler in transmission system. Signal to Noise Distortion ratio (SNDR) has been evaluated and a performance comparison is also drawn for the systems based on 90° and 120° hybrid coupler in both noise and intermodulation distortion dominant environment. The SNDR is efficiently improved by employing 120° hybrid coupler in noise dominant and intermodulation distortion dominant environment. An improvement of 4.86 dB is obtained in the maximum SNDR with 120° hybrid coupler is obtained over at 20 km optical fiber length compared with a 90° hybrid coupler based system. A significant reduction of third order intermodulation power at receiver has also been observed with 120° hybrid coupler.

  14. Assortative mating and directional or stabilizing selection for a non-linear function of traits in Tribolium.

    Science.gov (United States)

    Campo, J L; Gil, M G

    1993-01-12

    Assortative or random mating following selection in either direction on a non-linear index (experiment 1) or stabilizing selection for pupal length (experiment 2) were carried out for five generations in two lines of Tribolium castaneum (A and R, respectively), with three replicates each. The selected proportion was 25% in all lines. In experiment 1, the selection criterion was designed to increase the aggregate value of adult weight and the first- and second-order powers of pupal length. The A and R lines gave significant responses for the aggregate value (184 ± 6 and 161 ± 14, respectively), pupal length (0.74 ± 0.02 and 0.64 ± 0.05, respectively), and adult weight (0.79 ± 0.03 and 0.78 ± 0.12, respectively). Although the A line was not significantly better than the R line, there was a consistent advantage for assortative mating over random mating, the mean response for aggregate value and pupal length being approximately 1.15 times greater for the A line. In experiment 2 the selection criterion was the square of the deviation from the mean pupal length (stabilizing selection); both lines did not show any change for pupal length. The phenotypic variance showed a significant decrease in the A and R lines, due to a decrease in between-family variance. The assortatively and randomly mated lines were similar for these changes in phenotypic variation. RESUMEN: Aparemiento clasificado y selección direccional o estabilizante para una función no lineal en Tribolium. Dos líneas de Tribolium castaneum fueron seleccionadas direccionalmente para un índice no lineal (experimento 1) o estabilizantemente para longitud de pupa (experimento 2), apareando los animales seleccionados clasificadamente (A) o aleatoriamente (R). Había tres repeticiones por experimento y línea, siendo la proporción de selección el 25%. En el experimento 1, el objetivo de selección incluía el peso adulto así como la longitud de pupa y su cuadrado. Ambas líneas dieron respuesta

  15. Compact rat-race ring coupler with meander high-impedance transmission line and port impedance matching

    Directory of Open Access Journals (Sweden)

    Jun He

    2015-08-01

    Full Text Available A novel compact rat-race ring coupler with meander high-impedance transmission line and port impedance matching is presented in this Letter. First, a ring coupler with high port impedance is designed using meander lines. Secondly, an impedance matching section is designed to match the high port impedance to ordinary 50 Ω. The proposed coupler effectively reduces occupied area to 16.8% of conventional one. The design is validated both by simulation and measurement.

  16. Higher Order Mode Coupler Heating in Continuous Wave Operation

    Science.gov (United States)

    Solyak, N.; Awida, M.; Hocker, A.; Khabibobulline, T.; Lunin, A.

    Electromagnetic heating due to higher order modes (HOM) propagation is particularly a concern for continuous wave (CW) particle accelerator machines. Power on the order of several watts could flow out of the cavity's HOM ports in CW operations. The upgrade of the Linac Coherent Light Source (LCLS-II) at SLAC requires a major modification of the design of the higher order mode (HOM) antenna and feed through of the conventional ILC elliptical 9-cell cavity in order to utilize it for LCLS-II. The HOM antenna is required to bear higher RF losses, while relatively maintaining the coupling level of the higher order modes. In this paper, we present a detailed analysis of the heating expected in the HOM coupler with a thorough thermal quench study in comparison with the conventional ILC design. We discuss also how the heat will be removed from the cavity through RF cables with specially designed cooling straps. Finally, we report on the latest experimental results of cavity testing in vertical and horizontal cryostats.

  17. Robust optimization of 2x2 multimode interference couplers with fabrication uncertainties

    Science.gov (United States)

    Rehman, Samee ur; Langelaar, Matthijs; Van Keulen, Fred

    2013-03-01

    In this paper, we propose a novel design-for-manufacture strategy for integrated photonics which specifically addresses the commonly encountered scenario in which probability distributions of the manufacturing variations are not available, however their bounds are known. The best design point for the device, in the presence of these uncertainties, can be found by applying robust optimization. This is performed by minimizing the maximum realizable value of the objective with respect to the uncertainty set so that an optimum is found whose performance is relatively immune to fabrication variations. Instead of applying robust optimization directly on a computationally expensive simulation model of the integrated photonic device, we construct a cheap surrogate model by uniformly sampling the simulated device at different values of the design variables and interpolating the resulting objective using a Kriging metamodel. By applying robust optimization on the constructed surrogate, the global robust optimum can be found at low computational cost. As an illustration of the method's general applicability, we apply the robust optimization approach on a 2x2 multimode interference (MMI) coupler. We robustly minimize the imbalance in the presence of uncertainties arising from variations in the fabricated design geometry. For this example device, we also study the influence of the number of sample points on the quality of the metamodel and on the robust optimization process.

  18. Nanophotonic lab-on-a-chip platforms including novel bimodal interferometers, microfluidics and grating couplers.

    Science.gov (United States)

    Duval, Daphné; González-Guerrero, Ana Belén; Dante, Stefania; Osmond, Johann; Monge, Rosa; Fernández, Luis J; Zinoviev, Kirill E; Domínguez, Carlos; Lechuga, Laura M

    2012-05-08

    One of the main limitations for achieving truly lab-on-a-chip (LOC) devices for point-of-care diagnosis is the incorporation of the "on-chip" detection. Indeed, most of the state-of-the-art LOC devices usually require complex read-out instrumentation, losing the main advantages of portability and simplicity. In this context, we present our last advances towards the achievement of a portable and label-free LOC platform with highly sensitive "on-chip" detection by using nanophotonic biosensors. Bimodal waveguide interferometers fabricated by standard silicon processes have been integrated with sub-micronic grating couplers for efficient light in-coupling, showing a phase resolution of 6.6 × 10(-4)× 2π rad and a limit of detection of 3.3 × 10(-7) refractive index unit (RIU) in bulk. A 3D network of SU-8 polymer microfluidics monolithically assembled at the wafer-level was included, ensuring perfect sealing and compact packaging. To overcome some of the drawbacks inherent to interferometric read-outs, a novel all-optical wavelength modulation system has been implemented, providing a linear response and a direct read-out of the phase variation. Sensitivity, specificity and reproducibility of the wavelength modulated BiMW sensor has been demonstrated through the label-free immunodetection of the human hormone hTSH at picomolar level using a reliable biofunctionalization process.

  19. Capturing reflected cladding modes from a fiber Bragg grating with a double-clad fiber coupler.

    Science.gov (United States)

    Baiad, Mohamad Diaa; Gagné, Mathieu; Lemire-Renaud, Simon; De Montigny, Etienne; Madore, Wendy-Julie; Godbout, Nicolas; Boudoux, Caroline; Kashyap, Raman

    2013-03-25

    We present a novel measurement scheme using a double-clad fiber coupler (DCFC) and a fiber Bragg grating (FBG) to resolve cladding modes. Direct measurement of the optical spectra and power in the cladding modes is obtained through the use of a specially designed DCFC spliced to a highly reflective FBG written into slightly etched standard photosensitive single mode fiber to match the inner cladding diameter of the DCFC. The DCFC is made by tapering and fusing two double-clad fibers (DCF) together. The device is capable of capturing backward propagating low and high order cladding modes simply and efficiently. Also, we demonstrate the capability of such a device to measure the surrounding refractive index (SRI) with an extremely high sensitivity of 69.769 ± 0.035 μW/RIU and a resolution of 1.433 × 10(-5) ± 8 × 10(-9) RIU between 1.37 and 1.45 RIU. The device provides a large SRI operating range from 1.30 to 1.45 RIU with sufficient discrimination for all individual captured cladding modes. The proposed scheme can be adapted to many different types of bend, temperature, refractive index and other evanescent wave based sensors.

  20. A tunable dual-broad-band branch-line coupler utilizing composite right/left-handed transmission lines

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yu; HU Li; HE Sai-ling

    2005-01-01

    A tunable dual-broad-band branch-line coupler (BLC) utilizing composite right/left-handed (CRLH) transmission lines is presented. Two λ/4 segments consisting of CRLH transmission lines are added to each port to broaden the dual bands of the branch-line coupler. Numerical simulation and optimal design of the novel coupler are presented. The dual bands of the novel coupler are tunable and broad. The 1-dB bandwidth of each passband is more than 16% of the central frequency.

  1. Investigation of the nonlinear effects during the sedimentation process of a charged colloidal particle by direct numerical simulation.

    Science.gov (United States)

    Keller, Florian; Feist, Markus; Nirschl, Hermann; Dörfler, Willy

    2010-04-01

    In this article we study the settling process of a colloidal particle under the influence of a gravitational or centrifugal field in an unbounded electrolyte solution. Since particles in aqueous solutions normally carry a non-zero surface charge, a microscopic electric field develops which alters the sedimentation process compared to an uncharged particle. This process can be mathematically modelled via the Stokes-Poisson-Nernst-Planck system, a system of coupled partial differential equations that have to be solved in an exterior domain. After a dimensional analysis we investigate the influence of the various characteristic dimensionless numbers on the sedimentation velocity. Thereby the linear-response (weak-field) approximation that underpins almost all existing theoretical work on classical electrokinetic phenomena is relaxed, such that no additional assumption on the thickness of the double layer as well as on its displacement is needed. We show that there exists a strong influence of the fluid Reynolds number and the ionic strength on the sedimentation velocity. Further we have developed an asymptotic expansion to describe the limit of small values of the surface potential of a single particle. This expansion incorporates all nonlinear effects and extends the well-known results of Booth (1954) [1] and Ohshima et al. (1984) [2] to higher fluid Reynolds numbers.

  2. Directional coupling for quantum computing and communication.

    Science.gov (United States)

    Nikolopoulos, Georgios M

    2008-11-14

    We introduce the concept of directional coupling, i.e., the selective transfer of a state between adjacent quantum wires, in the context of quantum computing and communication. Our analysis rests upon a mathematical analogy between a dual-channel directional coupler and a composite spin system.

  3. Heat-driven thermoacoustic cryocooler operating at liquid hydrogen temperature with a unique coupler

    Science.gov (United States)

    Hu, J. Y.; Luo, E. C.; Li, S. F.; Yu, B.; Dai, W.

    2008-05-01

    A heat-driven thermoacoustic cryocooler is constructed. A unique coupler composed of a tube, reservoir, and elastic diaphragm is introduced to couple a traveling-wave thermoacoustic engine (TE) and two-stage pulse tube refrigerator (PTR). The amplitude of the pressure wave generated in the engine is first amplified in the coupler and the wave then passes into the refrigerator to pump heat. The TE uses nitrogen as its working gas and the PTR still uses helium as its working gas. With this coupler, the efficiency of the system is doubled. The engine and coupler match at a much lower operating frequency, which is of great benefit for the PTR to obtain a lower cooling temperature. The coupling place between the coupler and engine is also optimized. The onset problem is effectively solved. With these improvements, the heat-driven thermoacoustic cryocooler reaches a lowest temperature of 18.1K, which is the demonstration of heat-driven thermoacoustic refrigeration technology used for cooling at liquid hydrogen temperatures.

  4. RF Coupler Design for the TRIUMF ISAC-II Superconducting Quarter Wave Resonator

    CERN Document Server

    Poirier, R L; Harmer, P; Laxdal, R E; Mitra, A K; Sekatchev, I; Waraich, B; Zvyagintsev, V

    2004-01-01

    An RF Coupler for the ISAC-II medium beta (β=0.058 and 0.071) superconducting quarter wave resonators was designed and tested at TRIUMF. The main goal of this development was to achieve stable operation of superconducting cavities at high acceleration gradients and low thermal load to the helium refrigeration system. The cavities will operate at 6 MV/m acceleration gradient in overcoupled mode at a forward power 200 W at 106 MHz. The overcoupling provides ±20 Hz cavity bandwidth, which improves the stability of the RF control system for fast helium pressure fluctuations, microphonics and environmental noise. Choice of materials, cooling with liquid nitrogen, aluminum nitride RF window and thermal shields insure a small thermal load on the helium refrigeration system by the Coupler. An RF finger contact which causedμdust in the coupler housing was eliminated without any degradation of the coupler performance. RF and thermal calculations, design and test results on the coupler are p...

  5. Magnetic field sensor based on cascaded microfiber coupler with magnetic fluid

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Lianmin; Su, Delong; Wang, Zhaofang [College of Science, University of Shanghai for Science and Technology, Shanghai 200093 (China); Pu, Shengli, E-mail: shlpu@usst.edu.cn [College of Science, University of Shanghai for Science and Technology, Shanghai 200093 (China); Shanghai Key Laboratory of Modern Optical System, University of Shanghai for Science and Technology, Shanghai 200093 (China); Zeng, Xianglong [The Key Lab of Specialty Fiber Optics and Optical Access Network, Shanghai University, Shanghai 200072 (China); Lahoubi, Mahieddine [Laboratory L.P.S., Department of Physics, Faculty of Sciences, Badji-Mokhtar Annaba University, Annaba 23000 (Algeria)

    2016-09-07

    A kind of magnetic field sensor based on cascaded microfiber coupler with magnetic fluid is proposed and experimentally demonstrated. The magnetic fluid is utilized as the cladding of the fused regions of the cascaded microfiber coupler. As the interference valley wavelength of the sensing structure is sensitive to the ambient variation, considering the magnetic-field-dependent refractive index of magnetic fluid, the proposed structure is employed for magnetic field sensing. The effective coupling length for each coupling region of the as-fabricated cascaded microfiber coupler is 6031 μm. The achieved sensitivity is 125 pm/Oe, which is about three times larger than that of the previously similar structure based on the single microfiber coupler. Experimental results indicate that the sensing sensitivity can be easily improved by increasing the effective coupling length or cascading more microfiber couplers. The proposed magnetic field sensor is attractive due to its low cost, immunity to electromagnetic interference, as well as high sensitivity, which also has the potentials in other tunable all-fiber photonic devices, such as filter.

  6. A Novel Method to Magnetic Flux Linkage Optimization of Direct-Driven Surface-Mounted Permanent Magnet Synchronous Generator Based on Nonlinear Dynamic Analysis

    Directory of Open Access Journals (Sweden)

    Qian Xie

    2016-07-01

    Full Text Available This paper pays attention to magnetic flux linkage optimization of a direct-driven surface-mounted permanent magnet synchronous generator (D-SPMSG. A new compact representation of the D-SPMSG nonlinear dynamic differential equations to reduce system parameters is established. Furthermore, the nonlinear dynamic characteristics of new D-SPMSG equations in the process of varying magnetic flux linkage are considered, which are illustrated by Lyapunov exponent spectrums, phase orbits, Poincaré maps, time waveforms and bifurcation diagrams, and the magnetic flux linkage stable region of D-SPMSG is acquired concurrently. Based on the above modeling and analyses, a novel method of magnetic flux linkage optimization is presented. In addition, a 2 MW D-SPMSG 2D/3D model is designed by ANSYS software according to the practical design requirements. Finally, five cases of D-SPMSG models with different magnetic flux linkages are simulated by using the finite element analysis (FEA method. The nephograms of magnetic flux density are agreement with theoretical analysis, which both confirm the correctness and effectiveness of the proposed approach.

  7. Characteristics Of Fused Couplers Below Cut-Off

    Science.gov (United States)

    Meyer, T. J.; Tekippe, V. J.

    1989-02-01

    A number of different architectures are being explored for the utilization of optical fiber in the subscriber loop. In addition to reliability and maintainability, cost is a prime consideration since full implementation of fiber in the local loop will not occur until it is economically viable. It is becoming increasingly clear that in order to accommodate a number of ISDN applications, including high definition television (HDTV), singlemode fiber with a singlemode laser at the terminal end will be required. The situation at the subscriber end is quite different, however. The data rates are expected to be low on the return path to allow for POTS ( plain old telephone service) and some data transfer. When this requirement is combined with cost and reliability considerations, the inexpensive lasers developed for the CD (compact disk) market become quite attractive. The biggest disadvantage of this source is that the fiber which is optimized for singlemode operation at 1300nm tends to be multimode in the 800nm band where these lasers operate. Previous papers have considered such effects as modal noise and pulse dispersion when using these lasers with fiber that is singlemode in the 1300nm band.[1] Another consideration is the passive components required to implement such an architecture. Figure 1 shows a typical bidirectional design with full duplex operation on a single fiber. The key component is the 800/1300 wavelength division multiplexer/demultiplexer (WDM). Because of the multimode nature of the fiber in the 800nm band, all fiber approaches to fabricating the WDM, such as the fused beconical taper (FBT) approach, raise new issues which are not encountered, for example, with 1300/1500nm WDM's.[2] In this paper we discuss the effects of the multimode behavior of the fiber on the performance of fused couplers and WDM's.

  8. OBLIMAP 2.0: a fast climate model-ice sheet model coupler including online embeddable mapping routines

    Science.gov (United States)

    Reerink, Thomas J.; van de Berg, Willem Jan; van de Wal, Roderik S. W.

    2016-11-01

    This paper accompanies the second OBLIMAP open-source release. The package is developed to map climate fields between a general circulation model (GCM) and an ice sheet model (ISM) in both directions by using optimal aligned oblique projections, which minimize distortions. The curvature of the surfaces of the GCM and ISM grid differ, both grids may be irregularly spaced and the ratio of the grids is allowed to differ largely. OBLIMAP's stand-alone version is able to map data sets that differ in various aspects on the same ISM grid. Each grid may either coincide with the surface of a sphere, an ellipsoid or a flat plane, while the grid types might differ. Re-projection of, for example, ISM data sets is also facilitated. This is demonstrated by relevant applications concerning the major ice caps. As the stand-alone version also applies to the reverse mapping direction, it can be used as an offline coupler. Furthermore, OBLIMAP 2.0 is an embeddable GCM-ISM coupler, suited for high-frequency online coupled experiments. A new fast scan method is presented for structured grids as an alternative for the former time-consuming grid search strategy, realising a performance gain of several orders of magnitude and enabling the mapping of high-resolution data sets with a much larger number of grid nodes. Further, a highly flexible masked mapping option is added. The limitation of the fast scan method with respect to unstructured and adaptive grids is discussed together with a possible future parallel Message Passing Interface (MPI) implementation.

  9. Global output regulation of a class of lower triangular nonlinear systems with unknown control direction via output feedback

    Science.gov (United States)

    Li, Ranran

    2016-05-01

    In this paper, we study the global output regulation problem of a class of lower triangular systems under measurement output feedback. A novel high-gain filter is proposed to estimate the unmeasured states of the systems. Furthermore, we integrate the robust stabilisation technique and Nussbaumgain technique to achieve asymptotic regulation when the control direction is unknown. The simulation results illustrate the effectiveness of the proposed method.

  10. Relationship between rheological manufacturing process and optical performance of optical fiber coupler

    Institute of Scientific and Technical Information of China (English)

    SHUAI Ci-jun; DUAN Ji-an; ZHONG Jue

    2006-01-01

    Through theoretical analysis and experiments, the viscoelastic mechanical model of optical fiber coupler in theprocess of fused biconical taper was established, and the numerical analysis in non-uniform temperature field was made. The results show that the rheological parameters, such as drawing speed and fused temperature, have a tremendous influence on stress distribution and performance of optical fiber coupler, especially the influence of fused temperature. The change of fused temperature by 5 ℃ can lead to the change of the maximum stress by 30% and stress difference by 20% in the same cross section. The change of temperature gradient by 3% can result in the change of stress difference by 90%. In the present condition of rheological technology, rheological defects such as crystallizations and microcracks are easy to generate in the optical fiber coupler.

  11. Ultra broadband waveveguide coupler using an anisotropic sub-wavelength metamaterial

    CERN Document Server

    Halir, Robert; Luque-González, Jose Manuel; Sarmiento-Merenguel, Jose Darío; Schmid, Jens; Wangüemert-Pérez, Gonzalo; Xu, Dan-Xia; Wang, Shurui; Ortega-Moñux, Alejandro; Molina-Fernández, Íñigo

    2016-01-01

    Multimode interference couplers are a fundamental building block in many integrated photonic systems, ranging from high-speed coherent receivers to quantum splitters. However, their basic structure has remained fundamentally unchanged for almost four decades, limiting their size and operation bandwidth. Using sub-wavelength metamaterials, photonic devices with break-through size and performance have been recently reported. Leveraging the inherent anisotropy of these structures, here we derive a semi-analytic expression that enables the design of compact and ultra broadband multimode interference couplers. We experimentally demonstrate virtually perfect operation over a bandwidth in excess of 300nm (500nm in simulation), for a device three times shorter than its conventional counterpart, making this the most broadband multimode interference coupler reported to date. These results will enable ultra broadband integrated systems for applications in communications and sensing.

  12. Grating-assisted vertical couplers for signal routing in multilayer integrated optical networks

    Science.gov (United States)

    Calò, Giovanna; Petruzzelli, Vincenzo

    2017-03-01

    Grating-assisted vertical couplers, which behave as add-drop filters, are proposed for wavelength routing of the signal among the different layers of on-chip multilayer optical networks. The device implements a 2×2 wavelength router which can be assembled into higher-order three-dimensional matrices. In particular, simple design criteria are found through a rapid and efficient optimization approach based on the mode analysis and demonstrated by the Finite Difference Time Domain (FDTD) simulations. The proposed numerical method is valid either for in-plane or for vertical grating-assisted couplers and it requires negligible computational effort. Different configurations of grating-assisted vertical couplers are designed and their spectral behavior is analyzed by the FDTD. The proposed devices achieve low values of the crosstalk between the different ports (below -20 dB) and of the input reflection (below -15 dB).

  13. A case of the vibrant soundbridge stapes coupler in patients with mixed hearing loss.

    Science.gov (United States)

    Park, Ah Young; Jeon, Ju Hyun; Moon, In Seok; Choi, Jae Young

    2014-09-01

    The Vibrant Soundbridge (VSB) with stapes clip coupler placement at the stapes head has been used successfully to treat mixed hearing loss. Coupling between the floating mass transducer of the VSB and the stapes head is technically less demanding than incus vibroplasty and is more likely to generate a positive outcome without significantly changing residual hearing or resulting in medical or surgical complications. A 65-year-old man with bilateral mixed hearing loss and chronic otitis media underwent vibroplasty with a stapes clip coupler. Speech discrimination scores in both quiet and noise environments showed better functional gain with the VSB than with the use of a conventional hearing aid. The results of the present case show the feasibility of implanting a VSB with a stapes coupler in patients with mixed hearing loss due to chronic otitis media.

  14. Experimental demonstration of ultra-wideband and high-efficiency terahertz spoof surface plasmon polaritons coupler

    Science.gov (United States)

    Tang, Heng-He; Ma, Tian-Jun; Liu, Pu-Kun

    2016-05-01

    Spoof surface plasmon polaritons (SSPPs) are promising for subwavelength waveguiding in the terahertz (THz) frequency range. However, they cannot be efficiently excited from spatial propagating or guided waves due to the mismatched momenta. In this paper, a THz coupler is designed to smoothly bridge SSPPs and guided (or propagating) waves. By using a tapered parallel-plate waveguide, the incident energies are efficiently compressed and coupled into a subwavelength gap. Then, the momenta differences are mitigated with a graded grating. The numerical simulations show that the relative bandwidth of the coupler reaches up to 127%, and the maximum coupling efficiency is 99%. More importantly, experiment results in the 0.22 THz-0.33 THz frequency range are also presented to verify the good performance of the coupler. The work provides a technical support for terahertz waveguiding.

  15. A Novel Acoustic Emission Fiber Optic Sensor Based on a Single Mode Optical Fiber Coupler

    Institute of Scientific and Technical Information of China (English)

    CHEN Rongsheng; LIAO Yanbiao; ZHENG Gangtie; LIU Tongyu; Gerard Franklyn Fernando

    2001-01-01

    This paper reports, for the first time, on the use of a fused-taper single mode optical fiber coupler as a sensing element for the detection of acoustic emission (AE) and ultrasound. When an acoustic wave impinges on the mode-coupling region of a coupler, the coupling coefficient is modulated via the photo-elastic effect. Therefore, the transfer function of the coupler is modulated by an acoustic wave. The sensitivity of the sensor at 140 kHz was approximately 5.2 mV/Pa and the noise floor was 1 Pa. The bandwidth of the sensor was up to several hundred kHz. This AE sensor exhibits significant advantage compared with interferometer-based AE sensors.

  16. Discussion on coupling mechanism of asymmetric CRLH/RH TL coupler

    Institute of Scientific and Technical Information of China (English)

    WANG You-zhen; ZHANG Ye-wen; HE Li; LIU Fu-qiang; LI Hong-qiang; CHEN Hong

    2006-01-01

    A quasi 0-dB coupler composed of a composite right-/left-handed transmission line (CRLH TL) and a conventional right-handed transmission line (RH TL) is presented. This coupler is shown to exhibit broad bandwidth and tight coupling char acteristics. The circuit model and S-parameter results are also demonstrated. Another coupler with properly chosen loaded lumped-elements LL and CL in the CRLH TL is proposed to gain further understanding of the coupling mechanism. By adjusting the spacing between the CRLH TL and RH TL from 8 mm to 0.2 mm, it can be shown that backward coupling occurs in the left-handed region.

  17. Multi-coupler side-pumped Yb-doped double-clad fiber laser

    Institute of Scientific and Technical Information of China (English)

    Pan Ou(欧攀); Ping Yan(闫平); Mali Gong(巩马理); Wenlou Wei(韦文楼)

    2004-01-01

    The side-coupler of angle polished method, using angle-polished multimode fiber and optical adhesive, is used to efficiently pump an Yb-doped double-clad fiber laser. The maximum coupling efficiency of 78.6% is achieved by the side-coupler for a multimode fiber with a circular core of 200 μm and a double-clad fiber with a 350/400 μm D-shaped inner cladding. While laser diodes (LDs) with three side-couplers are simultaneously used as pump sources, maximum output power of 1.38 W and slope efficiency of 48.9% are demonstrated in the fiber laser system.

  18. Multi-coupler side-pumped Yb-doped double-clad fiber laser

    Institute of Scientific and Technical Information of China (English)

    欧攀; 闫平; 巩马理; 韦文楼

    2004-01-01

    The side-coupler of angle polished method, using angle-polished multimode fiber and optical adhesive, is used to efficiently pump an Yb-doped double-clad fiber laser. The maximum coupling efficiency of 78.6%is achieved by the side-coupler for a multimode fiber with a circular core of 200 μm and a double-clad fiber with a 350/400 μm D-shaped inner cladding. While laser diodes (LDs) with three side-couplers are simultaneously used as pump sources, maximum output power of 1.38 W and slope efficiency of 48.9% are demonstrated in the fiber laser system.

  19. RF characterization and testing of ridge waveguide transitions for RF power couplers

    Science.gov (United States)

    Kumar, Rajesh; Jose, Mentes; Singh, G. N.; Kumar, Girish; Bhagwat, P. V.

    2016-12-01

    RF characterization of rectangular to ridge waveguide transitions for RF power couplers has been carried out by connecting them back to back. Rectangular waveguide to N type adapters are first calibrated by TRL method and then used for RF measurements. Detailed information is obtained about their RF behavior by measurements and full wave simulations. It is shown that the two transitions can be characterized and tuned for required return loss at design frequency of 352.2 MHz. This opens the possibility of testing and conditioning two transitions together on a test bench. Finally, a RF coupler based on these transitions is coupled to an accelerator cavity. The power coupler is successfully tested up to 200 kW, 352.2 MHz with 0.2% duty cycle.

  20. Design of Dual-Band Two-Branch-Line Couplers with Arbitrary Coupling Coefficients in Bands

    Directory of Open Access Journals (Sweden)

    I. Prudyus

    2014-12-01

    Full Text Available A new approach to design dual-band two-branch couplers with arbitrary coupling coefficients at two operating frequency bands is proposed in this article. The method is based on the usage of equivalent subcircuits input reactances of the even-mode and odd-mode excitations. The exact design formulas for three options of the dual-band coupler with different location and number of stubs are received. These formulas permit to obtain the different variants for each structure in order to select the physically realizable solution and can be used in broad range of frequency ratio and power division ratio. For verification, three different dual-band couplers, which are operating at 2.4/3.9 GHz with different coupling coefficients (one with 3/6 dB, and 10/3 dB two others are designed, simulated, fabricated and tested. The measured results are in good agreement with the simulated ones.

  1. Comparison of coaxial higher order mode couplers for the CERN Superconducting Proton Linac study

    CERN Document Server

    AUTHOR|(CDS)2085329; Gerigk, Frank; Van Rienen, Ursula

    2017-01-01

    Higher order modes (HOMs) may affect beam stability and refrigeration requirements of superconducting proton linacs such as the Superconducting Proton Linac, which is studied at CERN. Under certain conditions beam-induced HOMs can accumulate sufficient energy to destabilize the beam or quench the superconducting cavities. In order to limit these effects, CERN considers the use of coaxial HOM couplers on the cutoff tubes of the 5-cell superconducting cavities. These couplers consist of resonant antennas shaped as loops or probes, which are designed to couple to potentially dangerous modes while sufficiently rejecting the fundamental mode. In this paper, the design process is presented and a comparison is made between various designs for the high-beta SPL cavities, which operate at 704.4 MHz. The rf and thermal behavior as well as mechanical aspects are discussed. In order to verify the designs, a rapid prototype for the favored coupler was fabricated and characterized on a low-power test-stand.

  2. On the Importance of Symmetrizing RF Coupler Fields for Low Emittance Beams

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zenghai; Zhou, Feng; Vlieks, Arnold; Adolphsen, Chris; /SLAC

    2011-06-23

    The input power of accelerator structure is normally fed through a coupling slot(s) on the outer wall of the accelerator structure via magnetic coupling. While providing perfect matching, the coupling slots may produce non-axial-symmetric fields in the coupler cell that can induce emittance growth as the beam is accelerated in such a field. This effect is especially important for low emittance beams at low energies such as in the injector accelerators for light sources. In this paper, we present studies of multipole fields of different rf coupler designs and their effect on beam emittance for an X-band photocathode gun being jointly designed with LLNL, and X-band accelerator structures. We will present symmetrized rf coupler designs for these components to preserve the beam emittance.

  3. Low-loss highly tolerant flip-chip couplers for hybrid integration of Si3N4 and polymer waveguides

    NARCIS (Netherlands)

    Mu, J.; Alexoudi, T.; Yong, Y.S.; Vázquez-Córdova, S.A.; Dijkstra, M.; Worhoff, K.; Duis, J.; Garcia Blanco, S.M.

    2016-01-01

    In this letter, low-loss and highly fabrication-tolerant flip-chip bonded vertical couplers under single-mode condition are demonstrated for the integration of a polymer waveguide chip onto the Si3N4/SiO2 passive platform. The passively aligned vertical couplers have a lateral misalignment between p

  4. Nonlinear Electrodynamics and QED

    OpenAIRE

    2003-01-01

    The limits of linear electrodynamics are reviewed, and possible directions of nonlinear extension are explored. The central theme is that the qualitative character of the empirical successes of quantum electrodynamics must be used as a guide for understanding the nature of the nonlinearity of electrodynamics at the subatomic level. Some established theories of nonlinear electrodynamics, namely, those of Mie, Born, and Infeld are presented in the language of the modern geometrical and topologi...

  5. Cost-Effectiveness Comparison of Coupler Designs of Wireless Power Transfer for Electric Vehicle Dynamic Charging

    Directory of Open Access Journals (Sweden)

    Weitong Chen

    2016-11-01

    Full Text Available This paper presents a cost-effectiveness comparison of coupler designs for wireless power transfer (WPT, meant for electric vehicle (EV dynamic charging. The design comparison of three common types of couplers is first based on the raw material cost, output power, transfer efficiency, tolerance of horizontal offset, and flux density. Then, the optimal cost-effectiveness combination is selected for EV dynamic charging. The corresponding performances of the proposed charging system are compared and analyzed by both simulation and experimentation. The results verify the validity of the proposed dynamic charging system for EVs.

  6. Comparative electromagnetic analysis of ridge waveguide transitions for RF power couplers

    Science.gov (United States)

    Kumar, Rajesh; Singh, P.; Mathur, Pratigya; Kumar, Girish

    2014-02-01

    Ridge waveguide transitions have been used in the high power couplers of many ongoing high intensity proton accelerator projects worldwide. Because of their smaller size and high energy densities, they require strict dimensional tolerances during fabrication and operating conditions. In order to study their electromagnetic characteristics, two different types of transitions with a straight ridge and a tapered ridge are compared using full wave simulations. Apart from the return loss and resonant frequency variation with dimensions, comparative studies on the phase shift, insertion losses, electric and magnetic field distributions and multipacting are also reported. This analysis will be useful in selecting the appropriate ridge waveguide transition for the RF couplers of accelerator cavities.

  7. Mode-evolution-based coupler for high saturation power Ge-on-Si photodetectors.

    Science.gov (United States)

    Byrd, Matthew J; Timurdogan, Erman; Su, Zhan; Poulton, Christopher V; Fahrenkopf, Nicholas M; Leake, Gerald; Coolbaugh, Douglas D; Watts, Michael R

    2017-02-15

    We propose a mode-evolution-based coupler for high saturation power germanium-on-silicon photodetectors. This coupler uniformly illuminates the intrinsic germanium region of the detector, decreasing saturation effects, such as carrier screening, observed at high input powers. We demonstrate 70% more photocurrent generation (9.1-15.5 mA) and more than 40 times higher opto-electrical bandwidth (0.7-31 GHz) than conventional butt-coupled detectors under high-power illumination. The high-power and high-speed performance of the device, combined with the compactness of the coupling method, will enable new applications for integrated silicon photonics systems.

  8. Ultrahigh-efficiency apodized grating coupler using fully etched photonic crystals

    DEFF Research Database (Denmark)

    Ding, Yunhong; Ou, Haiyan; Peucheret, Christophe

    2013-01-01

    We present an efficient method to design apodized grating couplers with Gaussian output profiles for efficient coupling between standard single mode fibers and silicon chips. An apodized grating coupler using fully etched photonic crystal holes on the silicon-on-insulator platform is designed......, and fabricated in a single step of lithography and etching. An ultralow coupling loss of x2212;1.74x2009;x2009;dB (67% coupling efficiency) with a 3xA0;dB bandwidth of 60xA0;nm is experimentally measured....

  9. Topology-optimized slow-light couplers for ring-shaped photonic crystal waveguide

    DEFF Research Database (Denmark)

    Pu, Minhao; Yang, Lirong; Frandsen, L. H.;

    2010-01-01

    We demonstrate a topology-optimized coupler for a ring-shaped photonic crystal waveguide to improve the coupling of light located in the slow-light regime. An enhancement of the coupling efficiency of up to 2.5 dB is experimentally demonstrated.......We demonstrate a topology-optimized coupler for a ring-shaped photonic crystal waveguide to improve the coupling of light located in the slow-light regime. An enhancement of the coupling efficiency of up to 2.5 dB is experimentally demonstrated....

  10. Optical microwave generation using two parallel DFB lasers integrated with Y-branch waveguide coupler

    Institute of Scientific and Technical Information of China (English)

    Xie Hong-Yun; Wang Lu; Zhao Ling-Juan; Zhu Hong-Liang; Wang Wei

    2007-01-01

    A new device of two parallel distributed feedback (DFB) lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in the Y-branch waveguide coupler through frequency beating of the two laser modes coming from two DFB laser in parallel, which had a small difference in frequency. Continuous rapid tuning of optical microwave signal from 13 to 42 GHz were realized by adjusting independently the driving currents injected into the two DFB lasers.

  11. Theory of direct and indirect effect of two-photon absorption on nonlinear optical losses in high power semiconductor lasers

    Science.gov (United States)

    Avrutin, E. A.; Ryvkin, B. S.

    2017-01-01

    The effect of the transverse laser structure on two-photon absorption (TPA) related effects in high-power diode lasers is analysed theoretically. The direct effect of TPA is found to depend significantly on the transverse waveguide structure, and predicted to be weaker in broad and asymmetric waveguide designs. The indirect effect of TPA, via carrier generation in the waveguide and free-carrier absorption, is analysed for the case of a symmetric laser waveguide and shown to be strongly dependent on the active layer position. With the active layer near the mode peak, the indirect effect is weaker than the direct effect due to the population of TPA-created carriers being efficiently depleted by their diffusion and capture into the active layer, whereas for the active layer position strongly shifted towards the p-cladding, the indirect effect can become the dominant power limitation at very high currents. It is shown that for optimizing a laser design for pulsed high power operation, both TPA related effects and the inhomogeneous carrier accumulation in the waveguide caused by diffusive current need to be taken into account.

  12. Ultracompact and high efficient silicon-based polarization splitter-rotator using a partially-etched subwavelength grating coupler

    Science.gov (United States)

    Xu, Yin; Xiao, Jinbiao

    2016-06-01

    On-chip polarization manipulation is pivotal for silicon-on-insulator material platform to realize polarization-transparent circuits and polarization-division-multiplexing transmissions, where polarization splitters and rotators are fundamental components. In this work, we propose an ultracompact and high efficient silicon-based polarization splitter-rotator (PSR) using a partially-etched subwavelength grating (SWG) coupler. The proposed PSR consists of a taper-integrated SWG coupler combined with a partially-etched waveguide between the input and output strip waveguides to make the input transverse-electric (TE) mode couple and convert to the output transverse-magnetic (TM) mode at the cross port while the input TM mode confine well in the strip waveguide during propagation and directly output from the bar port with nearly neglected coupling. Moreover, to better separate input polarizations, an additional tapered waveguide extended from the partially-etched waveguide is also added. From results, an ultracompact PSR of only 8.2 μm in length is achieved, which is so far the reported shortest one. The polarization conversion loss and efficiency are 0.12 dB and 98.52%, respectively, together with the crosstalk and reflection loss of -31.41/-22.43 dB and -34.74/-33.13 dB for input TE/TM mode at wavelength of 1.55 μm. These attributes make the present device suitable for constructing on-chip compact photonic integrated circuits with polarization-independence.

  13. 基于非线性主元分析和符号有向图的故障诊断方法%A fault diagnosis method based on nonlinear principal component analysis and sign directed graph

    Institute of Scientific and Technical Information of China (English)

    黄道平; 龚婷婷; 曾辉

    2009-01-01

    Nonlinear principal component analysis (NLPCA) fault detection method achieves good detection results especially in a nonlinear process. Signed directed graph (SDG) model is based on deep-going information, which excels in fault interpretation. In this work, an NLPCA-SDG fault diagnosis method was proposed. SDG model was used to interpret the residual contributions produced by NLPCA. This method could overcome the shortcomings of traditional principal component analysis (PCA) method in fault detection of a nonlinear process and the shortcomings of traditional SDG method in single variable statistics in discriminating node conditions and threshold values. The application to a distillation unit of a petrochemical plant illustrated its validity in nonlinear process fault diagnosis.%@@引言 化工过程通常具有变量多、非线性程度高、难以获得准确的数学模型、故障样本少等特点.

  14. Partially non-linear stimulation intensity-dependent effects of direct current stimulation on motor cortex excitability in humans.

    Science.gov (United States)

    Batsikadze, G; Moliadze, V; Paulus, W; Kuo, M-F; Nitsche, M A

    2013-04-01

    Transcranial direct current stimulation (tDCS) of the human motor cortex at an intensity of 1 mA with an electrode size of 35 cm(2) has been shown to induce shifts of cortical excitability during and after stimulation. These shifts are polarity-specific with cathodal tDCS resulting in a decrease and anodal stimulation in an increase of cortical excitability. In clinical and cognitive studies, stronger stimulation intensities are used frequently, but their physiological effects on cortical excitability have not yet been explored. Therefore, here we aimed to explore the effects of 2 mA tDCS on cortical excitability. We applied 2 mA anodal or cathodal tDCS for 20 min on the left primary motor cortex of 14 healthy subjects. Cathodal tDCS at 1 mA and sham tDCS for 20 min was administered as control session in nine and eight healthy subjects, respectively. Motor cortical excitability was monitored by transcranial magnetic stimulation (TMS)-elicited motor-evoked potentials (MEPs) from the right first dorsal interosseous muscle. Global corticospinal excitability was explored via single TMS pulse-elicited MEP amplitudes, and motor thresholds. Intracortical effects of stimulation were obtained by cortical silent period (CSP), short latency intracortical inhibition (SICI) and facilitation (ICF), and I wave facilitation. The above-mentioned protocols were recorded both before and immediately after tDCS in randomized order. Additionally, single-pulse MEPs, motor thresholds, SICI and ICF were recorded every 30 min up to 2 h after stimulation end, evening of the same day, next morning, next noon and next evening. Anodal as well as cathodal tDCS at 2 mA resulted in a significant increase of MEP amplitudes, whereas 1 mA cathodal tDCS decreased corticospinal excitability. A significant shift of SICI and ICF towards excitability enhancement after both 2 mA cathodal and anodal tDCS was observed. At 1 mA, cathodal tDCS reduced single-pulse TMS-elicited MEP amplitudes and shifted SICI

  15. Final Commissioning of the MICE RF Module Prototype with Production Couplers

    Energy Technology Data Exchange (ETDEWEB)

    Torun, Yagmur [IIT, Chicago; Anderson, Terry [Fermilab; Backfish, Michael [Fermilab; Bowring, Daniel [Fermilab; Freemire, Ben [IIT, Chicago (main); Hart, Terrence [Mississippi U.; Kochemirovskiy, Alexey [Illinois U., Chicago; Lane, Peter [IIT, Chicago; Luo, Tianhuan [LBNL, Berkeley; Moretti, Alfred [Fermilab; Neuffer, David [Fermilab; Peterson, David [Fermilab; Popovic, Milorad [Fermilab; Yonehara, Katsuya [Fermilab

    2016-06-01

    We report operational experience from the prototype RF module for the Muon Ionization Cooling Experiment (MICE) with final production couplers at Fermilab's MuCool Test Area. This is the last step in fully qualifying the RF modules for operation in the experiment at RAL.

  16. The secondary electron emission coefficient of the material for the superconducting cavity input coupler

    CERN Document Server

    Kijima, Y; Furuya, T; Michizono, S I; Mitsunobu, S; Noer, R J

    2002-01-01

    The secondary electron emission (SEE) coefficients have been measured, for materials used in the coupler for KEKB superconducting cavities, i.e. Copper, Stainless steel plated with Copper, Niobium and Ceramic. We show that the electron bombardment is effective in decreasing the SEE coefficient of the metal surfaces, and the TiN coating and window fabrication processes influence the secondary electron yield. (author)

  17. Performance of Polarizers and Coupler in an All Polarization Maintaining Fiber Interferometer

    Institute of Scientific and Technical Information of China (English)

    CHEN Zhe; LIAO Yanbiao; HU Yongrning; LI Xiujian; MENG Zhou

    2000-01-01

    It is given mathematical models and analyze the performance of polarizers and coupler in an all polarization maintaining fiber (PMF) Michelson interferometer. The optical coherent signal to noise ratio (CSNR) of the interferometer is calculated by means of the Jones matrix with cross coupling matrix elements.

  18. Research on Design of Plate-type Electromagnetic Coupler in Underwater Inductive Power Transmission

    Directory of Open Access Journals (Sweden)

    Qu Li-yan

    2015-01-01

    Full Text Available Magnetic coupler has a good application in the field of underwater sensor. Magnetic coupler at work, interference by underwater complex situation, stability and efficiency of charging device of the gap is larger fluctuations. The traditional electromagnetic coupling is charging for the stability of the clearance to demand higher. Charging for underwater, as a result of the existence of ocean currents, electromagnetic coupling clearance may not remain very stable. When there is deviation gap, a larger electromagnetic coupling performance deviation. On this particular problem, it puts forward the design method of a new type of plate type electromagnetic coupling. First of all, the leakage inductance of the finite element method to calculate system and excitation inductance, establish electromagnetic coupler with compensation capacitor equivalent circuit, and the primary circuit and secondary circuit was designed. On the basis, the voltage gain and efficiency of the system are carrying on the theoretical derivation and calculation. The simulation experimental results show that the magnetic coupler has a stable voltage gain and charging efficiency, when the partial core within 10 mm, voltage gain remains steady at 5.8%, efficiency remain at around 90%.

  19. Cpl6: The New Extensible, High-Performance Parallel Coupler forthe Community Climate System Model

    Energy Technology Data Exchange (ETDEWEB)

    Craig, Anthony P.; Jacob, Robert L.; Kauffman, Brain; Bettge,Tom; Larson, Jay; Ong, Everest; Ding, Chris; He, Yun

    2005-03-24

    Coupled climate models are large, multiphysics applications designed to simulate the Earth's climate and predict the response of the climate to any changes in the forcing or boundary conditions. The Community Climate System Model (CCSM) is a widely used state-of-art climate model that has released several versions to the climate community over the past ten years. Like many climate models, CCSM employs a coupler, a functional unit that coordinates the exchange of data between parts of climate system such as the atmosphere and ocean. This paper describes the new coupler, cpl6, contained in the latest version of CCSM,CCSM3. Cpl6 introduces distributed-memory parallelism to the coupler, a class library for important coupler functions, and a standardized interface for component models. Cpl6 is implemented entirely in Fortran90 and uses Model Coupling Toolkit as the base for most of its classes. Cpl6 gives improved performance over previous versions and scales well on multiple platforms.

  20. On-chip Mode Multiplexer Based on a Single Grating Coupler

    DEFF Research Database (Denmark)

    Ding, Yunhong; Ou, Haiyan; Xu, Jing;

    2012-01-01

    A two-mode multiplexer based on a single grating coupler is proposed and demonstrated on a silicon chip. The LP01 and LP11 modes of a few-mode fiber are excited from TE0 and TE1 silicon waveguide modes....

  1. Characteristics of WDM Couplers Based on 80 μm Cladding Fiber

    Institute of Scientific and Technical Information of China (English)

    Hyunsook; Shin; Woojin; Shin; Manjung; Han; Kyoungrok; Kim; Seungryong; Han; Yunsong; Jeong; K.; Oh

    2003-01-01

    We have fabricated 1310/1550 and 1480/1550nm WDM couplers using a fiber of 80μm cladding diameter, whose tapering length is shortened by 4~8mm for the identical coupling strength compared to those of 125μm cladding fibers. We also report their splicing loss to conventional single mode fibers.

  2. Finite Element Analysis of RF Coupler in Normal-Low Temperature

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hansol; Lee, Hak Yong; Park, Chan; Lee, Jaeyeol; Lim, Dong Yeal; Yoo, Jeonghoon [Yonsei University, Seoul (Korea, Republic of); Hyun, Myung Wook [Institute of Basic Science, Daejeon (Korea, Republic of)

    2014-10-15

    A heavy ion accelerator is a device that accelerates heavy ions in the radio frequency (RF) range. The electric field that flows into the RF cavity continuously accelerates heavy ions in accordance with the phase of the input electromagnetic wave. For the purpose, it is necessary to design a coupler shape that can stably transfer the RF wave into the cavity. The RF coupler in a heavy ion accelerator has a large temperature difference between the input port and output port, which radiates the RF waves. It is necessary to consider the heat deflection on the RF coupler that occurs as a result of the rapid temperature gradient from an ultra-low temperature about 0 K to a room temperature about 300 K. The purpose of this study was to improve the system performance through an analysis of the intensity of the output electric field and temperature distribution considering various shapes of the RF coupler, along with an analysis of the durability considering the heat deflection and heat loss.

  3. Novel Fused Taper 1x4 Star Coupler for Full-Band Operation

    Institute of Scientific and Technical Information of China (English)

    Masakazu; Ohashi; Hideki; Sasaki; Ryoukichi; Matsumoto; Daiichiro; Tanaka; Akira; Wada

    2003-01-01

    A novel fused taper 1×4 coupler for full-band operation is proposed. Wavelength flattened characteristics and excellent branching uniformity less than 0.4 dB have been achieved in wavelength range from 1200 nm to 1700 nm.

  4. Topology optimization of grating couplers for the efficient excitation of surface plasmons

    DEFF Research Database (Denmark)

    Andkjær, Jacob Anders; Sigmund, Ole; Nishiwaki, Shinji

    2010-01-01

    We propose a methodology for a systematic design of grating couplers for efficient excitation of surface plasmons at metal-dielectric interfaces. The methodology is based on a two-dimensional topology optimization formulation based on the H-polarized scalar Helmholtz equation and finite-element m...

  5. Dynamic balancing of a single crank-double slider mechanism with symmetrically moving couplers

    NARCIS (Netherlands)

    van der Wijk, V.; Herder, Justus Laurens; Pisla, Doina; Ceccarelli, Marco; Husty, Manfred; Corves, Burkhard

    2010-01-01

    This article presents a systematic investigation of the dynamic balancing of a singlecrank-double slider mechanism of which the coupler links have symmetric motion. From the equationsof the linear momentum and angular momentum the force balance conditions and momentbalance conditions are derived. Bo

  6. The Experimental Study on Acousto-optic Modulation Based on Single-mode Fiber Fused Coupler

    Institute of Scientific and Technical Information of China (English)

    Liu Guoxiang; Hu Li; Ye Kunzhen; Lin Weigan

    2002-01-01

    In-line acoustic-optic (AO) modulation experiments were demonstrated based on the acoustic-optic effect in optical fiber fused taper couplers.About 73%,64%,and 61% modulation have been achieved at frequencies of 0.169 MHz,0.367 MHz and 0.521 MHz with an electrical driving power less than 10 mW,respectively.

  7. Comparative Simulation Studies of Multipacting in Higher-Order-Mode Couplers of Superconducting RF Cavities

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y. M. [Peking University, Beijing (China); Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Liu, Kexin [Peking University, Beijing (China); Geng, Rongli [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)

    2014-02-01

    Multipacting (MP) in higher-order-mode (HOM) couplers of the International Linear Collider (ILC) baseline cavity and the Continuous Electron Beam Accelerator Facility (CEBAF) 12 GeV upgrade cavity is studied by using the ACE3P suites, developed by the Advanced Computations Department at SLAC. For the ILC cavity HOM coupler, the simulation results show that resonant trajectories exist in three zones, corresponding to an accelerating gradient range of 0.6-1.6 MV/m, 21-34 MV/m, 32-35 MV/m, and > 40MV/m, respectively. For the CEBAF 12 GeV upgrade cavity HOM coupler, resonant trajectories exist in one zone, corresponding to an accelerating gradient range of 6-13 MV/m. Potential implications of these MP barriers are discussed in the context of future high energy pulsed as well as medium energy continuous wave (CW) accelerators based on superconducting radio frequency cavities. Frequency scaling of MP's predicted in HOM couplers of the ILC, CBEAF upgrade, SNS and FLASH third harmonic cavity is given and found to be in good agreement with the analytical result based on the parallel plate model.

  8. Non-linear direct multi-scale image enhancement based on the luminance and contrast masking characteristics of the human visual system.

    Science.gov (United States)

    Nercessian, Shahan C; Panetta, Karen A; Agaian, Sos S

    2013-09-01

    Image enhancement is a crucial pre-processing step for various image processing applications and vision systems. Many enhancement algorithms have been proposed based on different sets of criteria. However, a direct multi-scale image enhancement algorithm capable of independently and/or simultaneously providing adequate contrast enhancement, tonal rendition, dynamic range compression, and accurate edge preservation in a controlled manner has yet to be produced. In this paper, a multi-scale image enhancement algorithm based on a new parametric contrast measure is presented. The parametric contrast measure incorporates not only the luminance masking characteristic, but also the contrast masking characteristic of the human visual system. The formulation of the contrast measure can be adapted for any multi-resolution decomposition scheme in order to yield new human visual system-inspired multi-scale transforms. In this article, it is exemplified using the Laplacian pyramid, discrete wavelet transform, stationary wavelet transform, and dual-tree complex wavelet transform. Consequently, the proposed enhancement procedure is developed. The advantages of the proposed method include: 1) the integration of both the luminance and contrast masking phenomena; 2) the extension of non-linear mapping schemes to human visual system inspired multi-scale contrast coefficients; 3) the extension of human visual system-based image enhancement approaches to the stationary and dual-tree complex wavelet transforms, and a direct means of; 4) adjusting overall brightness; and 5) achieving dynamic range compression for image enhancement within a direct multi-scale enhancement framework. Experimental results demonstrate the ability of the proposed algorithm to achieve simultaneous local and global enhancements.

  9. Grating couplers in silicon-on-insulator: The role of photonic guided resonances on lineshape and bandwidth

    Science.gov (United States)

    Passoni, M.; Gerace, D.; Carroll, L.; Andreani, L. C.

    2017-01-01

    Most grating couplers for silicon photonics are designed to match the approximately 10 μm mode-field diameter (MFD) of single-mode telecom fibres. In this letter, we analyse grating-coupler designs in the Silicon-on-Insulator (SOI) platform in a wide range of MFDs (4-100 μm) and related footprints, to give a physical understanding of the trends in efficiency and lineshape of the corresponding coupling spectra. We show that large-footprint grating couplers have an intrinsic Lorentzian lineshape that is determined by the quasi-guided photonic modes (or guided resonances) of the corresponding photonic crystal slab, while small-footprint grating couplers have a Gaussian lineshape resulting from the k-space broadening of the incident mode. The crossover between the two regimes is characterized by Voigt lineshapes. Multi-objective particle-swarm optimisation of selected small-footprint apodized grating-couplers is then used to locate the "Pareto fronts;" along which the highest coupling efficiency is achieved for a given bandwidth. This approach identifies several high-efficiency 220 nm SOI grating coupler designs with 1 dB bandwidths exceeding 100 nm. Such grating couplers are ideally suited for broadband photonic applications, such as wavelength-division multiplexing and environmental sensing, and are compatible with commercially available ultra-high numerical aperture fibres.

  10. Four-Pass Coupler for Laser-Diode-Pumped Solid-State Laser

    Science.gov (United States)

    Coyle, Donald B.

    2008-01-01

    A four-pass optical coupler affords increased (in comparison with related prior two-pass optical couplers) utilization of light generated by a laser diode in side pumping of a solid-state laser slab. The original application for which this coupler was conceived involves a neodymium-doped yttrium aluminum garnet (Nd:YAG) crystal slab, which, when pumped by a row of laser diodes at a wavelength of 809 nm, lases at a wavelength of 1,064 nm. Heretofore, typically, a thin laser slab has been pumped in two passes, the second pass occurring by virtue of reflection of pump light from a highly reflective thin film on the side opposite the side through which the pump light enters. In two-pass pumping, a Nd:YAG slab having a thickness of 2 mm (which is typical) absorbs about 84 percent of the 809-nm pump light power, leaving about 16 percent of the pump light power to travel back toward the laser diodes. This unused power can cause localized heating of the laser diodes, thereby reducing their lifetimes. Moreover, if the slab is thinner than 2 mm, then even more unused power travels back toward the laser diodes. The four-pass optical coupler captures most of this unused pump light and sends it back to the laser slab for two more passes. As a result, the slab absorbs more pump light, as though it were twice as thick. The gain and laser cavity beam quality of a smaller laser slab in conjunction with this optical coupler can thus be made comparable to those of a larger two-pass-pumped laser slab.

  11. 圆销车钩自由转角与车体参数匹配性的研究%Matching between Free Angle of Round-Pin Coupler and Carbody Structure Parameters

    Institute of Scientific and Technical Information of China (English)

    曲天威; 许自强; 马卫华

    2015-01-01

    为了明确圆销车钩自由转角与车体主要结构参数的匹配关系,采用理论分析与动态仿真相结合的方法,研究了曲线通过及直线承压工况下,机车车体主要结构参数与车钩转角的关系.结合缓冲器的非线性迟滞特性并采用控制系统仿真方法,建立了圆销钩缓系统的对中钩肩模型,该模型能够较好体现钩肩回复力的实时性;采用内插样条函数进行拟合,根据工程图纸对车钩钩头轮廓曲线进行数据离散,反演得到钩头轮廓曲面,并建立了一对连挂钩头间的曲面/曲面接触模型,进一步考虑了连挂钩头间的相互作用,能够准确模拟连挂钩头间的相对运动;通过对不同自由转角条件下机车的受力情况进行分析,得出了车钩自由转角设计推荐公式,并通过动力学仿真对其进行了验证.研究与仿真结果表明,受轨道曲率变化的影响,车钩实际转角比静态计算结果要偏大0.5°~1.0°,钩头间的相对转动可对车钩转角进行补偿,以顺利实现机车曲线通过;车钩自由摆角与车体结构要有较好的匹配,以保证机车承压时的运行安全性,同时建议该型机车钩缓系统自由转角设计值应小于8°,这与推荐公式的计算结果有较好的一致性.%To explicate the matching relation between main structure parameters of carbody and round-pin coupler,theoretical analysis and dynamic simulation method were used to analyze the relation between main structure parameters of carbody and rotation angle of the coupler in the cases of curve passing and pressure bearing on straight line. Control system simulation method was adopted to establish the model of aligning shoulders taking into account the nonlinear hysteresis characteristics of buffer,which can reflect real-time characteristics of aligning shoulders force. Coupler head profile were discretized to obtain the profile data,which were

  12. A 2×2 SOI mach-zehnder thermo-optical switch based on strongly guided paired multimode interference couplers

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A silicon-on-insulator 2×2 Mach-Zehnder thermo-optical switch is developed based on strongly guided paired multimode interference couplers. The multimode-interference couplers were etched deeply for improving coupler characteristics such as self-imaging quality, uniformity and fabrication tolerance. The proposed switch achieves good performances, including a low insertion loss of -11 .OdB, a fiber-waveguide coupling loss of -4.3dB and a fast response speed measured to be 3.5 and 8.8 μs for raise and fall switching time, respectively.

  13. A Simulation Tool for Steady State Thermal Performance Applied to the SPL Double-Walled Tube RF Power Coupler

    CERN Document Server

    Bonomi, R

    2014-01-01

    This note reports on the study carried out to design a tool for steady-state thermal performance of the RF power coupler inside the SPL cryostat. To reduce the amount of heat penetrating into the helium bath where the cavity is placed, the main coupler is actively cooled by means of an adequate flow rate of helium gas. The knowledge of the temperature profiles and the overall thermal performance of the power coupler are fundamental for the estimation of the total heat load budget of the cryostat.

  14. A Very Large Eddy Simulation of the Nonreacting Flow in a Single-Element Lean Direct Injection Combustor Using PRNS with a Nonlinear Subscale Model

    Science.gov (United States)

    Shih, Tsan-Hsing; Liu, Nan-Suey

    2009-01-01

    Very large eddy simulation (VLES) of the nonreacting turbulent flow in a single-element lean direct injection (LDI) combustor has been successfully performed via the approach known as the partially resolved numerical simulation (PRNS/VLES) using a nonlinear subscale model. The grid is the same as the one used in a previous RANS simulation, which was considered as too coarse for a traditional LES simulation. In this study, we first carry out a steady RANS simulation to provide the initial flow field for the subsequent PRNS/VLES simulation. We have also carried out an unsteady RANS (URANS) simulation for the purpose of comparing its results with that of the PRNS/VLES simulation. In addition, these calculated results are compared with the experimental data. The present effort has demonstrated that the PRNS/VLES approach, while using a RANS type of grid, is able to reveal the dynamically important, unsteady large-scale turbulent structures occurring in the flow field of a single-element LDI combustor. The interactions of these coherent structures play a critical role in the dispersion of the fuel, hence, the mixing between the fuel and the oxidizer in a combustor.

  15. Direct Forecasting of Subsurface Flow Response from Non-Linear Dynamic Data By Linear Least-Squares in Canonical Functional Principal Component Space.

    Science.gov (United States)

    Satija, A.; Caers, J.

    2014-12-01

    Hydrogeological forecasting problems, like many subsurface forecasting problems, often suffer from the scarcity of reliable data yet complex prior information about the underlying earth system. Assimilating and integrating this information into an earth model requires using iterative parameter space exploration techniques or Monte Carlo Markov Chain techniques. Since such an earth model needs to account for many large and small scale features of the underlying system, as the system gets larger, iterative modeling can become computationally prohibitive, in particular when the forward model would allow for only a few hundred model evaluations. In addition, most modeling methods do not include the purpose for which inverse method are built, namely, the actual forecast and usually focus only on data and model. In this study, we present a technique to extract features of the earth system informed by time-varying dynamic data (data features) and those that inform a time-varying forecasting variable (forecast features) using Functional Principal Component Analysis. Canonical Coefficient Analysis is then used to examine the relationship between these features using a linear model. When this relationship suggests that the available data informs the required forecast, a simple linear regression can be used on the linear model to directly estimate the posterior of the forecasting problem, without any iterative inversion of model parameters. This idea and method is illustrated using an example of contaminant flow in an aquifer with complex prior, large dimension and non-linear flow & transport model.

  16. Stability of solitons in PT-symmetric couplers

    CERN Document Server

    Driben, Rodislav

    2011-01-01

    Families of analytical solutions are found for symmetric and antisymmetric solitons in the dual-core system with the Kerr nonlinearity and PT-balanced gain and loss. The crucial issue is stability of the solitons. A stability region is obtained in an analytical form, and verified by simulations, for the PT-symmetric solitons. For the antisymmetric ones, the stability border is found in a numerical form. Moving solitons of both types collide elastically. The two soliton species merge into one in the "supersymmetric" case, with equal coefficients of the gain, loss and inter-core coupling. These solitons feature a subexponential instability, which may be suppressed by periodic switching ("management").

  17. A Novel Method for Heightening Sensitivity of Prism Coupler-Based SPR Sensor

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-Wei; WEN Ting-Dun; WU Zhi-Fang

    2011-01-01

    We present a novel method for heightening the sensitivity of a prism coupler-based surface plasmon resonance (SPR) sensor. The method is based on the total reflection prism made of BK7 glass combined with the Kretschmann geometry of theattenuated total reflection (ATR) method. Compared to the conventional methods of prism coupler-based SPR the novel method provides higher semsitivity to the measurement system.Theoretical simulations show that the detetion sensitivity to the refractive index (RI) of the sensor based on the novel approach has a strong dependence on the thickness of the metal layer. The RI resolution of the sensor is predicted to be 8 × 107 refractive indox units (RIU) under the condition of optimum metal film thickness.This novel method can leave out a precision angle rotation device in the angle modulation and it is unnecessary to adjust the acceptance angle of the light detector. The principal advantage of this method over other methods of light intensity modulation based on prism coupler-based SPR is high sensitivity, expediency to measure and aplication of long distances.%@@ We present a novel method for heightening the sensitivity of a prism coupler-based surface plasmon resonance(SPR) sensor.The method is based on the total reflection prism made of BK7 glass combined with the Kretschmann geometry of theattenuated total reflection(ATR) method.Compared to the conventional methods of prism coupler-based SPR,the novel method provides higher sensitivity to the measurement system.Theoretical simulations show that the detection sensitivity to the refractive index(RI) of the sensor based on the novel approach has a strong dependence on the thickness of the metal layer.The RI resolution of the sensor is predicted to be 8 × 10-7 refractive index units(RIU) under the condition of optimum metal film thickness.This novel method can leave out a precision angle rotation device in the angle modulation and it is unnecessary to adjust the acceptance angle of

  18. Laser Trimming for Adjustment of Grating Offset in Phase-Shifted Fiber Grating Coupler for All-Optical Switching Application

    Institute of Scientific and Technical Information of China (English)

    Hirohisa; Yokota; Yutaka; Sasaki

    2003-01-01

    We theoretically investigated laser trimming to adjust grating offset in phase-shifted fiber grating coupler (FGC) for all-optical switching application. It was clarified that the trimming made the extinction ratio higher in all-optical FGC switch.

  19. Local field enhancement on demand based on hybrid plasmonic-dielectric directional coupler.

    Science.gov (United States)

    Adhem, Kholod; Avrutsky, Ivan

    2016-03-21

    The concept of local field enhancement using conductor-gap-dielectric-substrate (CGDS) waveguide structure is proposed. The dispersion equation is derived analytically and solved numerically. The solution of the dispersion equation reveals the anti-crossing behavior of coupled modes. the optimal gap layer thickness and the coupling length of the guided modes are obtained. The mechanism of the CGDS works as follows: Light waves are guided by conventional low-loss dielectric waveguides and, upon demand, they are transformed into highly confined plasmonic modes with strong local field enhancement, and get transformed back into low-loss dielectric modes. As an example, in a representative CGDS structure, the optimal plasmonic gap size is 17 nm, the local light intensity is found to be more than one order of magnitude stronger than the intensity of the dielectric mode at the film surface. The coupling length is only 2.1 μm at a wavelength of 632.8 nm. Such a local field confinement on demand is expected to facilitate efficient light-matter interaction in integrated photonic devices while minimizing losses typical for plasmonic structures.

  20. 基于直接学习法的一种新预失真器%Novel Adaptive Nonlinear Predistorter Based on the Direct Learning Algorithm

    Institute of Scientific and Technical Information of China (English)

    徐琪; 段哲明

    2012-01-01

    为了克服宽带信号经过记忆放大器的非线性失真,针对有记忆非线性功放的多项式模型,提出了一种新的基于直接学习法的自适应算法.该算法采用无记忆预失真器的级联扩展,具有横向滤波器结构,与记忆多项式有相似的线性化效果.并且针对信号噪声对自适应算法的扰动和收敛速度慢等缺点,采用归一化LMS算法加以改进.在非线性功放的记忆多项式模型下,通过宽带信号验证了基于直接学习法的记忆型预失真器算法的有效性.%A novel adaptive direct learning algorithm for power amplifier with memory effects is proposed to compensate the nonlinear distortion introduced by HPAs. The cascade extension of the memoryless predistorter and the structure of finite ?impulse ?response filter significantly can get the close performs compare to memory polynomial method. The Normalize LMS algorithm is proposed to the disturb of signal noise and convergence speed problems. Under power amplifier' s memory polynomial model, simulation result show that the predistorter has the excellent 昿erformance when the wideband signal pass it.

  1. Design and Analysis of an Optical Coupler for Concentrated Solar Light Using Optical Fibers in Residential Buildings

    Directory of Open Access Journals (Sweden)

    Afshin Aslian

    2016-01-01

    Full Text Available Concentrated sunlight that is transmitted by fiber optics has been used for generating electricity, heat, and daylight. On the other hand, multijunction photovoltaic cells provide high efficiency for generating electricity from highly concentrated sunlight. This study deals with designing and simulating a high-efficiency coupler, employing a mathematical model to connect sunlight with fiber optics for multiple applications. The coupler concentrates and distributes irradiated light from a primary concentrator. In this study, a parabolic dish was used as the primary concentrator, a coupler that contains nine components called a compound truncated pyramid and a cone (CTPC, all of which were mounted on a plate. The material of both the CTPC and the plate was BK7 optical glass. Fiber optics cables and multijunction photovoltaic cells were connected to the cylindrical part of the CTPC. The fibers would transmit the light to the building to provide heat and daylight, whereas multijunction photovoltaic cells generate electricity. Theoretical and simulation results showed high performance of the designed coupler. The efficiency of the coupler was as high as 92%, whereas the rim angle of the dish increased to an optimum angle. Distributed sunlight in the coupler increased the flexibility and simplicity of the design, resulting in a system that provided concentrated electricity, heat, and lighting for residential buildings.

  2. Design, fabrication, and characterisation of fully etched TM grating coupler for photonic integrated system-in-package

    Science.gov (United States)

    Gili-de-Villasante, Oriol; Tcheg, Paul; Wang, Bei; Suna, Alpaslan; Giannoulis, Giannis; Lazarou, Ioannis; Apostolopoulos, Dimitrios; Avramopoulos, Hercules; Pleros, Nikos; Baus, Matthias; Karl, Matthias; Tekin, Tolga

    2012-06-01

    Grating couplers are the best solution for testing nano-photonic circuits. Their main benefit is that they allow access via an optical fiber from the top and therefore there is no need to dice the chip and prepare the facets crucially. In the PLATON project grating couplers were designed to couple TM mode into and out of the SOI waveguides. Simulations came up with a grating coupler layout capable of theoretical coupling losses lower than 3dB for 1550 nm in TM configuration. A fully etched grating structure was chosen for fabrication simplicity and the optimal filling factor was found. The structures were fabricated using proximity error correction (PEC) and show a uniform coupling efficiency for all couplers. Therefore they are well-suited for all applications which demand for stable fiber-to-chip coupling. The spectral response of the structures was measured from 1500 to 1580 nm with 2 nm step and measuring the fiber-tofiber losses of three straight waveguides equipped with three grating couplers with different gap widths. The optimal grating period exhibits adequate coupling losses of 3.23 dB per coupler at 1557 nm, being therefore the most promising design.

  3. Research of new packaging and cooling technique for high power fiber laser used pump coupler

    Science.gov (United States)

    Mu, Wei; Si, Xu; Lin, Ya-jun; Xu, Cheng-lin; Ma, Yun-liang; Xiao, Chun

    2015-10-01

    This article analyzes the advantages and disadvantages of a packaging structure for pump coupler, where common heat conduction material is used. In this study, the possibility of using new technology of thermal conductivity is discussed. We also proposes a solution that make the function and effect of package more uniform. A serial of experiments are done for research the cooling effect and the working reliability of the fiber combiners and couplers. Experiment proves that after improved method of package, the cooling speed increases significantly comparing the sample with old type of package technique. The technique discussed in this paper will make the high power fiber laser working long time with steady power output and high efficiency.

  4. Demonstration of a Tuneable Coupler for Superconducting Qubits Using Coherent, Time Domain, Two-Qubit Operations

    CERN Document Server

    Bialczak, R C; Hofheinz, M; Lenander, M; Lucero, E; Neeley, M; O'Connell, A D; Sank, D; Wang, H; Weides, M; Wenner, J; Yamamoto, T; Cleland, A N; Martinis, J M

    2010-01-01

    A major challenge in the field of quantum computing is the construction of scalable qubit coupling architectures. Here, we demonstrate a novel tuneable coupling circuit that allows superconducting qubits to be coupled over long distances. We show that the inter-qubit coupling strength can be arbitrarily tuned over nanosecond timescales within a sequence that mimics actual use in an algorithm. The coupler has a measured on/off ratio of 1000. The design is self-contained and physically separate from the qubits, allowing the coupler to be used as a module to connect a variety of elements such as qubits, resonators, amplifiers, and readout circuitry over long distances. Such design flexibility is likely to be essential for a scalable quantum computer.

  5. Design of N-type feedthrough for HOM coupler for cERL injector cavity

    Science.gov (United States)

    Watanabe, K.; Noguchi, S.; Kako, E.; Shishido, T.

    2014-01-01

    The injector cryomodule for the compact energy recovery linac (cERL) is under development at KEK. The cryomodule with 3L-band 2-cell cavities was built in June 2012. A prototype 2-cell cavity and three other 2-cell cavities with five higher-order-mode (HOM) couplers for actual operation were fabricated in May 2011. The vertical tests of these cavities were carried out after standard surface preparation at the KEK Superconducting accelerator Test Facility (KEK-STF) from October 2010 to March 2012. Radio-frequency feedthroughs with high thermal conductivity for the HOM coupler were also developed to achieve 12.5 MV/m CW operation in the cryomodule. A Kyocera NR-type connector was modified to connect to this target. The results of vertical tests of the 2-cell cavities to measure their feedthrough performance will be reported in this paper.

  6. Eddy current loss calculation and thermal analysis of axial-flux permanent magnet couplers

    Directory of Open Access Journals (Sweden)

    Di Zheng

    2017-02-01

    Full Text Available A three-dimensional magnetic field analytical model of axial-flux permanent magnet couplers is presented to calculate the eddy current loss, and the prediction of the copper plate temperature under various loads is analyzed. The magnetic field distribution is calculated, and then the eddy current loss is obtained, with the magnetic field analytical model established in cylindrical coordinate. The influence of various loads on eddy current loss is analyzed. Furthermore, a thermal model of axial-flux permanent magnet couplers is established by taking the eddy current loss as the heat source, using the electromagnetic-thermal coupled method. With the help of the thermal model, the influence of various loads on copper plate temperature rise is also analyzed. The calculated results are compared with the results of finite element method and measurement. The comparison results confirm the validity of the magnetic field analytical model and thermal model.

  7. In-situ Blast Testing of Shear-Screw Mechanical Couplers

    Science.gov (United States)

    2010-07-01

    of installation and availability. There are multiple suppliers of shear screw couplers; for this study, the Double Barrel Zap Screwlok system by...Barsplice Products Inc. was selected. The Double Barrel Zap Screwlok is capable of developing 125 percent of the yield strength of a No. 5 bar and has...additional mechanical resistance, via dowel action. A photograph of the Double Barrel Zap Screwlok couple is provided in Figure 1 . For the

  8. A Case of the Vibrant Soundbridge Stapes Coupler in Patients with Mixed Hearing Loss

    OpenAIRE

    Park, Ah Young; Jeon, Ju Hyun; Moon, In Seok; Choi, Jae Young

    2014-01-01

    The Vibrant Soundbridge (VSB) with stapes clip coupler placement at the stapes head has been used successfully to treat mixed hearing loss. Coupling between the floating mass transducer of the VSB and the stapes head is technically less demanding than incus vibroplasty and is more likely to generate a positive outcome without significantly changing residual hearing or resulting in medical or surgical complications. A 65-year-old man with bilateral mixed hearing loss and chronic otitis media u...

  9. Ultralow loss, high Q, four port resonant couplers for quantum optics and photonics.

    Science.gov (United States)

    Rokhsari, H; Vahala, K J

    2004-06-25

    We demonstrate a low-loss, optical four port resonant coupler (add-drop geometry), using ultrahigh Q (>10(8)) toroidal microcavities. Different regimes of operation are investigated by variation of coupling between resonator and fiber taper waveguides. As a result, waveguide-to-waveguide power transfer efficiency of 93% (0.3 dB loss) and nonresonant insertion loss of 0.02% (photonic networks.

  10. Coupling analysis at the coupler and edge-coupled unilateral fin line

    Science.gov (United States)

    Fernandes, Humberto C. C.; Silva, Sidney A.; Silva, Jose P.

    1998-11-01

    Computer programs are developed in FORTRAN 77 and Matlab for Windows languages, given the results in 3-D of the dispersion and of the coupling, as functions of the frequency, conductivity and permittivity for the unilateral fin lines coupler asymmetric in E-plane, on semiconductor substrate. The characteristic impedance and complex propagation constant, for the odd and even-modes excitation are obtained by Transverse Transmission Line method -- TTL. These programs are easily used in graduate and undergraduate courses with good efficiency.

  11. Nonlinear optics

    CERN Document Server

    Bloembergen, Nicolaas

    1996-01-01

    Nicolaas Bloembergen, recipient of the Nobel Prize for Physics (1981), wrote Nonlinear Optics in 1964, when the field of nonlinear optics was only three years old. The available literature has since grown by at least three orders of magnitude.The vitality of Nonlinear Optics is evident from the still-growing number of scientists and engineers engaged in the study of new nonlinear phenomena and in the development of new nonlinear devices in the field of opto-electronics. This monograph should be helpful in providing a historical introduction and a general background of basic ideas both for expe

  12. On-chip fluorescence excitation and collection by focusing grating couplers

    Science.gov (United States)

    Kerman, Sarp; Vercruysse, Dries; Claes, Tom; Ul Hasan, Mahmud; Neutens, Pieter; Mukund, Vignesh; Rottenberg, Xavier; Lagae, Liesbet; Van Dorpe, Pol

    2016-05-01

    Fluorescence detection is a commonly used technique to detect particles. Microscopes are used for the fluorescence detection of the micro-particles. However, the conventional microscopes are bulky. It is cumbersome to integrate all the equipment used for detection in one setup. They can be replaced by photonic chips for the detection of micro-particles such as cells. Most of the biological detection techniques require the utilization of the visible range of the spectrum. SiN as a waveguide material stands out for biological applications due to its transparency in the visible spectrum. Specifically designed grating couplers can be exploited to focus from inside SiN waveguides at a designated location above the chip. Those SiN focusing grating couplers can mimic microscope objectives for on-chip biological detection applications such as fluorescence and Raman spectroscopy. In this report, we present a 2D SiN focusing grating coupler. We study the effect of the grating design on the focus properties of visible light using finite-difference time-domain simulations.

  13. Straightforward and accurate technique for post-coupler stabilization in drift tube linac structures

    Science.gov (United States)

    Khalvati, Mohammad Reza; Ramberger, Suitbert

    2016-04-01

    The axial electric field of Alvarez drift tube linacs (DTLs) is known to be susceptible to variations due to static and dynamic effects like manufacturing tolerances and beam loading. Post-couplers are used to stabilize the accelerating fields of DTLs against tuning errors. Tilt sensitivity and its slope have been introduced as measures for the stability right from the invention of post-couplers but since then the actual stabilization has mostly been done by tedious iteration. In the present article, the local tilt-sensitivity slope TSn' is established as the principal measure for stabilization instead of tilt sensitivity or some visual slope, and its significance is developed on the basis of an equivalent-circuit diagram of the DTL. Experimental and 3D simulation results are used to analyze its behavior and to define a technique for stabilization that allows finding the best post-coupler settings with just four tilt-sensitivity measurements. CERN's Linac4 DTL Tank 2 and Tank 3 have been stabilized successfully using this technique. The final tilt-sensitivity error has been reduced from ±100 %/MHz down to ±3 %/MHz for Tank 2 and down to ±1 %/MHz for Tank 3. Finally, an accurate procedure for tuning the structure using slug tuners is discussed.

  14. RF Couplers for Normal-Conducting Photoinjector of High-Power CW FEL

    CERN Document Server

    Kurennoy, Sergey; Wood, Richard L; Schultheiss, T J; Rathke, John; Young, Lloyd

    2004-01-01

    A high-current emittance-compensated RF photoinjector is a key enabling technology for a high-power CW FEL. A preliminary design of a normal-conducting, 2.5-cell pi-mode, 700-MHz CW RF photoinjector that will be built for demonstration purposes, is completed. This photoinjector will be capable of accelerating a 100-mA electron beam (3 nC per bunch at 35 MHz bunch repetition rate) to 2.7 MeV while providing an emittance below 7 mm-mrad at the wiggler. More than 1 MW of RF power will be fed into the photoinjector cavity through two ridge-loaded tapered waveguides. The waveguides are coupled to the cavity by "dog-bone" irises cut in a thick wall. Due to CW operation of the photoinjector, the cooling of the coupler irises is a rather challenging thermal management project. This paper presents results of a detailed electromagnetic modeling of the coupler-cavity system, which has been performed to select the coupler design that minimizes the iris heating due to RF power loss in its walls.

  15. RF Couplers for Normal-Conducting Photoinjector of High-Power CW FEL

    Science.gov (United States)

    Kurennoy, Sergey; Schrage, Dale; Wood, Richard; Schultheiss, Tom; Rathke, John; Young, Lloyd

    2004-05-01

    A high-current emittance-compensated RF photoinjector is a key enabling technology for a high-power CW FEL. A preliminary design of a normal-conducting, 2.5-cell pi-mode, 700-MHz CW RF photoinjector that will be build for demonstration purposes, is completed. This photoinjector will be capable of accelerating a 100-mA electron beam (3 nC per bunch at 35 MHz bunch repetition rate) to 2.7 MeV while providing an emittance below 7 mm-mrad at the wiggler. More than 1 MW of RF power will be fed into the photoinjector cavity through two ridge-loaded tapered waveguides. The waveguides are coupled to the cavity by "dog-bone" irises cut in a thick wall. Due to CW operation of the photoinjector, the cooling of the coupler irises is a rather challenging thermal management project. This paper presents results of a detailed electromagnetic modeling of the coupler-cavity system, which has been performed to select the coupler design that minimizes the iris heating due to RF power loss in its walls.

  16. RF couplers for normal-conducting photoinjector of high-power CW FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey)

    2004-01-01

    A high-current emittance-compensated RF photoinjector is a key enabling technology for a high-power CW FEL. A preliminary design of a normal-conducting, 2.5-cell pi-mode, 700-MHz CW RF photoinjector that will be built for demonstration purposes, is completed. This photoinjector will be capable of accelerating a 100-mA electron beam (3 nC per bunch at 35 MHz bunch repetition rate) to 2.7 MeV while providing an emittance below 7 mm-mrad at the wiggler. More than 1 MW of RF power will be fed into the photoinjector cavity through two ridge-loaded tapered waveguides. The waveguides are coupled to the cavity by 'dog-bone' irises cut in a thick wall. Due to CW operation of the photoinjector, the cooling of the coupler irises is a rather challenging thermal management project. This paper presents results of a detailed electromagnetic modeling of the coupler-cavity system, which has been performed to select the coupler design that minimizes the iris heating due to RF power loss in its walls.

  17. Detection of recombinant growth hormone by evanescent cascaded waveguide coupler on silica-on-silicon.

    Science.gov (United States)

    Ozhikandathil, Jayan; Packirisamy, Muthukumaran

    2013-05-01

    An evanescent wave based biosensor is developed on the silica-on-silicon (SOS) with a cascaded waveguide coupler for the detection of recombinant growth hormone. So far, U -bends and tapered waveguides are demonstrated for increasing the penetration depth and enhancing sensitivity of the evanescent wave sensor. In this work, a monolithically integrated sensor platform containing a cascaded waveguide coupler with optical power splitters and combiners designed with S -bends and tapper waveguides is demonstrated for an enhanced detection of recombinant growth hormone. In the cascaded waveguide coupler, a large surface area to bind the antibody with increased penetration depth of evanescent wave to excite the tagged-rbST is obtained by splitting the waveguide into multiple paths using Y splitters designed with s -bends and subsequently combining them back to a single waveguide through tapered waveguide and combiners. Hence a highly sensitive fluoroimmunoassay sensor is realized. Using the 2D FDTD (Finite-difference time-domain method) simulation of waveguide with a point source in Rsoft FullWAVE, the fluorescence coupling efficiency of straight and bend section of waveguide is analyzed. The sensor is demonstrated for the detection of fluorescently-tagged recombinant growth hormone with the detection limit as low as 25 ng/ml.

  18. Comparison of coaxial higher order mode couplers for the CERN Superconducting Proton Linac study

    Directory of Open Access Journals (Sweden)

    K. Papke

    2017-06-01

    Full Text Available Higher order modes (HOMs may affect beam stability and refrigeration requirements of superconducting proton linacs such as the Superconducting Proton Linac, which is studied at CERN. Under certain conditions beam-induced HOMs can accumulate sufficient energy to destabilize the beam or quench the superconducting cavities. In order to limit these effects, CERN considers the use of coaxial HOM couplers on the cutoff tubes of the 5-cell superconducting cavities. These couplers consist of resonant antennas shaped as loops or probes, which are designed to couple to potentially dangerous modes while sufficiently rejecting the fundamental mode. In this paper, the design process is presented and a comparison is made between various designs for the high-beta SPL cavities, which operate at 704.4 MHz. The rf and thermal behavior as well as mechanical aspects are discussed. In order to verify the designs, a rapid prototype for the favored coupler was fabricated and characterized on a low-power test-stand.

  19. Study on self-imaging properties for line-tapered multimode interference couplers

    Science.gov (United States)

    Le, ZiChun; Huang, SunGang; Fu, MingLei; Dong, Wen; Zhang, Jie; Zhang, Ming

    2011-10-01

    The line-tapered multimode interference (MMI) couplers have advantage of compact dimension compared with conventional straight MMI couplers and then are more suitable for integrated optical components. In this paper, the self-imaging properties including general self-image and overlapping-image properties for the line-tapered MMI couplers are discussed thoroughly. Based on the width equation we defined, compact equations for the positions, amplitudes, phases of general images and overlapping images are deduced. Three disciplines for general self-imaging and four disciplines for overlapping-imaging are summarized and discussed. In addition, the overlapping-image properties are further studied by matrix analytic method and an inductive reasoning method of constructing phase and intensity matrix is developed based on it. Finally, all the theoretical results are compared with simulations results obtained by the finite-difference beam propagation method (FD-BPM). Both theoretical and simulation results are shown in this paper and demonstrated to be coincided with each other to a great extent.

  20. Arbitrary coupling ratio multimode interference couplers in Silicon-on-Insulator

    CERN Document Server

    Doménech, José David; Gargallo, Bernardo; Muñoz, Pascual

    2014-01-01

    In this paper we present the design, manufacturing, characterization and analysis of the coupling ratio spectral response for Multimode Interference (MMI) couplers in Silicon-on-Insulator (SOI) technology. The couplers were designed using a Si rib waveguide with SiO 2 cladding, on a regular 220 nm film and 2 {\\mu}m buried oxide SOI wafer. A set of eight different designs, three canonical and five using a widened/narrowed coupler body, have been subject of study, with coupling ratios 50:50, 85:15 and 72:28 for the former, and 95:05, 85:15, 75:25, 65:35 and 55:45 for the latter. Two wafers of devices were fabricated, using two different etch depths for the rib waveguides. A set of six dies, three per wafer, whose line metrology matched the design, were retained for characterization. The coupling ratios obtained in the experimental results match, with little deviations, the design targets for a wavelength range between 1525 and 1575 nm, as inferred from spectral measurements and statistical analyses. Excess loss...

  1. Analysis of a Substrate Integrated Waveguide Hybrid Ring (Rat-Race Coupler

    Directory of Open Access Journals (Sweden)

    Ramin Dehdasht-Heydari

    2014-01-01

    Full Text Available This paper presents an efficient analysis of a substrate integrated waveguide (SIW single-layer hybrid ring coupler (rat-race for millimeter-wave and microwave applications. The scattered field from each circular cylinder is expanded by cylindrical eigenfunctions with unknown coefficients that have been solved by electric and magnetic tangential boundary on each metallic via. The coupler S-matrix is calculated by using mode matching that uses the cylindrical vector expansion analysis to minimize the computational time and provides more physical insight. To achieve higher bandwidth, the radiuses of the coupler under analysis have been optimized in Matlab code by invasive weed optimization (IWO method, and the results have been verified by CST package. The return loss and the isolation are less than −15 dB, and −18 dB, respectively. The insertion loss is divided equally -3±0.2 dB, with 0±5 and 180±10 degrees in output ports over the operating frequency bandwidth and the agreement of phase differences in output ports has been examined objectively by feature selective validation (FSV technique.

  2. TTF3 power coupler thermal analysis for LCLS-II CW operation

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, L. [SLAC National Accelerator Lab., Menlo Park, CA (United States). Linac Coherent Light Source (LCLS); Adolphsen, C. [SLAC National Accelerator Lab., Menlo Park, CA (United States). Linac Coherent Light Source (LCLS); Li, Z. [SLAC National Accelerator Lab., Menlo Park, CA (United States). Linac Coherent Light Source (LCLS); Nantista, C. [SLAC National Accelerator Lab., Menlo Park, CA (United States). Linac Coherent Light Source (LCLS); Raubenheimer, T. [SLAC National Accelerator Lab., Menlo Park, CA (United States). Linac Coherent Light Source (LCLS); Solyak, N. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Gonin, I. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2015-05-13

    The TESLA 9-cell SRF cavity design has been adopted for use in the LCLS-II SRF Linac. Its TTF3 coaxial fundamental power coupler (FPC), optimized for pulsed operation in European XFEL and ILC, requires modest changes to make it suitable for LCLS-II continuous-wave (CW) operation. For LCLS-II it must handle up to 7 kW of power, fully reflected, with the maximum temperature around 450 K, the coupler bake temperature. In order to improve TTF3 FPC cooling, an increased copper plating thickness will be used on the inner conductor of the ‘warm’ section of the coupler. Also, the antenna will be shortened to achieve higher cavity Qext values. Fully 3D FPC thermal analysis has been performed using the SLAC-developed parallel finite element code suite ACE3P, which includes electromagnetic codes and an integrated electromagnetic, thermal and mechanical multi-physics code. In this paper, we present TTF3 FPC thermal analysis simulation results obtained using ACE3P as well as a comparison with measurement results.

  3. Suppression of multipacting in high power RF couplers operating with superconducting cavities

    Science.gov (United States)

    Ostroumov, P. N.; Kazakov, S.; Morris, D.; Larter, T.; Plastun, A. S.; Popielarski, J.; Wei, J.; Xu, T.

    2017-06-01

    Capacitive input couplers based on a 50 Ω coaxial transmission line are frequently used to transmit RF power to superconducting (SC) resonators operating in CW mode. It is well known that coaxial transmission lines are prone to multipacting phenomenon in a wide range of RF power level and operating frequency. The Facility for Rare Isotope Beams (FRIB) being constructed at Michigan State University includes two types of quarter wave SC resonators (QWR) operating at 80.5 MHz and two types of half wave SC resonators (HWR) operating at 322 MHz. As was reported in ref. [1] a capacitive input coupler used with HWRs was experiencing strong multipacting that resulted in a long conditioning time prior the cavity testing at design levels of accelerating fields. We have developed an insert into 50 Ω coaxial transmission line that provides opportunity to bias the RF coupler antenna and protect the amplifier from the bias potential in the case of breakdown in DC isolation. Two of such devices have been built and are currently used for the off-line testing of 8 HWRs installed in the cryomodule.

  4. Straightforward and accurate technique for post-coupler stabilization in drift tube linac structures

    CERN Document Server

    Khalvati, Mohammad Reza

    2016-01-01

    The axial electric field of Alvarez drift tube linacs (DTLs) is known to be susceptible to variations due to static and dynamic effects like manufacturing tolerances and beam loading. Post-couplers are used to stabilize the accelerating fields of DTLs against tuning errors. Tilt sensitivity and its slope have been introduced as measures for the stability right from the invention of post-couplers but since then the actual stabilization has mostly been done by tedious iteration. In the present article, the local tilt-sensitivity slope TS 0 n is established as the principal measure for stabilization instead of tilt sensitivity or some visual slope, and its significance is developed on the basis of an equivalent-circuit diagram of the DTL. Experimental and 3D simulation results are used to analyze its behavior and to define a technique for stabilization that allows finding the best post-coupler settings with just four tilt-sensitivity measurements. CERN ’ s Linac4 DTL Tank 2 and Tank 3 have been stabilized succ...

  5. Nonlinear supratransmission

    Energy Technology Data Exchange (ETDEWEB)

    Geniet, F; Leon, J [Physique Mathematique et Theorique, CNRS-UMR 5825, 34095 Montpellier (France)

    2003-05-07

    A nonlinear system possessing a natural forbidden band gap can transmit energy of a signal with a frequency in the gap, as recently shown for a nonlinear chain of coupled pendulums (Geniet and Leon 2002 Phys. Rev. Lett. 89 134102). This process of nonlinear supratransmission, occurring at a threshold that is exactly predictable in many cases, is shown to have a simple experimental realization with a mechanical chain of pendulums coupled by a coil spring. It is then analysed in more detail. First we go to different (nonintegrable) systems which do sustain nonlinear supratransmission. Then a Josephson transmission line (a one-dimensional array of short Josephson junctions coupled through superconducting wires) is shown to also sustain nonlinear supratransmission, though being related to a different class of boundary conditions, and despite the presence of damping, finiteness, and discreteness. Finally, the mechanism at the origin of nonlinear supratransmission is found to be a nonlinear instability, and this is briefly discussed here.

  6. Research on polarization state of prism coupler sensor for measuring liquid refractive index

    Science.gov (United States)

    Zhang, Zhi-Wei

    2013-09-01

    Due to many experimental data required and a lot of calculations involved, it is very complex and cumbersome to model prism-based liquid-refractive-index-measuring methods. By use of the feature of TE-polarized wave and TM-polarized wave and differential measurement principle, we developed a new method of mathematical modeling for measuring refractive index of a liquid based upon Fresnel formula and prism internal reflection at incident angle less than critical angle. With this method only two different concentrations measurements for a kind of solution can lead to the determination of computational model. It introduces the principle of an optic-fiber sensor system based on prism-coupler for measuring refractive index of a liquid, and it contains the configuration picture of the sensing optical path, the spectrogram of the semiconductor laser and the structure block diagram of measuring system, the system is mainly made up of the semiconductor laser with 1654.14nm in wavelength, 1×2 optical switch, Y-shaped photo-coupler with coupled rate 50:50, the detector based on isosceles prism-coupler, the data process and control system based on AT89C51 and photoelectric transformer. For TM-polarized wave and TE-polarized wave, theoretical simulations show that the ratio of sensitivity is 1.11, therefore, the beam that the component of TM-polarized wave is more than the one of TE-polarized wave is advantageous to heightening the systemۥs measurement sensitivity. Measurements are performed to examine the validity of the theoretical model and four theoretical models are given, and these results indicate the feasibility of four theoretical models with an error of 3%. In this study, a beam of light is broken down into two beams in the coupler of Y-shaped coupler, the one acts as the reference optical path, the other is known as the sensing optical path, consequently the method can limit well the fluctuation of the light source, the variation of the photodiodeۥ s dark

  7. Filamentation with nonlinear Bessel vortices.

    Science.gov (United States)

    Jukna, V; Milián, C; Xie, C; Itina, T; Dudley, J; Courvoisier, F; Couairon, A

    2014-10-20

    We present a new type of ring-shaped filaments featured by stationary nonlinear high-order Bessel solutions to the laser beam propagation equation. Two different regimes are identified by direct numerical simulations of the nonlinear propagation of axicon focused Gaussian beams carrying helicity in a Kerr medium with multiphoton absorption: the stable nonlinear propagation regime corresponds to a slow beam reshaping into one of the stationary nonlinear high-order Bessel solutions, called nonlinear Bessel vortices. The region of existence of nonlinear Bessel vortices is found semi-analytically. The influence of the Kerr nonlinearity and nonlinear losses on the beam shape is presented. Direct numerical simulations highlight the role of attractors played by nonlinear Bessel vortices in the stable propagation regime. Large input powers or small cone angles lead to the unstable propagation regime where nonlinear Bessel vortices break up into an helical multiple filament pattern or a more irregular structure. Nonlinear Bessel vortices are shown to be sufficiently intense to generate a ring-shaped filamentary ionized channel in the medium which is foreseen as opening the way to novel applications in laser material processing of transparent dielectrics.

  8. A Novel Wind Turbine Concept Based on an Electromagnetic Coupler and the Study of Its Fault Ride-through Capability

    Directory of Open Access Journals (Sweden)

    Rui You

    2013-11-01

    Full Text Available This paper presents a novel type of variable speed wind turbine with a new drive train different from the variable speed wind turbine commonly used nowadays. In this concept, a synchronous generator is directly coupled with the grid, therefore, the wind turbine transient overload capability and grid voltage support capability can be significantly improved. An electromagnetic coupling speed regulating device (EMCD is used to connect the gearbox high speed shaft and synchronous generator rotor shaft, transmitting torque to the synchronous generator, while decoupling the gearbox side and the synchronous generator, so the synchronous generator torque oscillations during a grid fault are not transmitted to the gearbox. The EMCD is composed of an electromagnetic coupler and a one quadrant operation converter with reduced capability and low cost. A control strategy for the new wind turbine is proposed and a 2 MW wind turbine model is built to study the wind turbine fault ride-through capability. An integrated simulation environment based on the aeroelastic code HAWC2 and software Matlab/Simulink is used to study its fault ride-through capability and the impact on the structural loads during grid three phase and two phase short circuit faults.

  9. On-chip grating coupler array on the SOI platform for fan-in/fan-out of MCFs with low insertion loss and crosstalk

    DEFF Research Database (Denmark)

    Ding, Yunhong; Ye, Feihong; Peucheret, Christophe

    2015-01-01

    We report the design and fabrication of a compact multi-core fiber fan-in/fan-out using a grating coupler array on the SOI platform. The grating couplers are fully-etched, enabling the whole circuit to be fabricated in a single lithography and etching step. Thanks to the apodized design for the g......We report the design and fabrication of a compact multi-core fiber fan-in/fan-out using a grating coupler array on the SOI platform. The grating couplers are fully-etched, enabling the whole circuit to be fabricated in a single lithography and etching step. Thanks to the apodized design...

  10. Practical Nonlinearities

    Science.gov (United States)

    2016-07-01

    Advanced Research Projects Agency (DARPA) Dynamics-Enabled Frequency Sources (DEFYS) program is focused on the convergence of nonlinear dynamics and...Early work in this program has shown that nonlinear dynamics can provide performance advantages. However, the pathway from initial results to...dependent nonlinear stiffness observed in these devices. This work is ongoing, and will continue through the final period of this program . Reference 9

  11. Nonlinear cochlear mechanics.

    Science.gov (United States)

    Zweig, George

    2016-05-01

    An earlier paper characterizing the linear mechanical response of the organ of Corti [J. Acoust. Soc. Am. 138, 1102-1121 (2015)] is extended to the nonlinear domain. Assuming the existence of nonlinear oscillators nonlocally coupled through the pressure they help create, the oscillator equations are derived and examined when the stimuli are modulated tones and clicks. The nonlinearities are constrained by the requirements of oscillator stability and the invariance of zero crossings in the click response to changes in click amplitude. The nonlinear oscillator equations for tones are solved in terms of the fluid pressure that drives them, and its time derivative, presumably a proxy for forces created by outer hair cells. The pressure equation is reduced to quadrature, the integrand depending on the oscillators' responses. The resulting nonlocally coupled nonlinear equations for the pressure, and oscillator amplitudes and phases, are solved numerically in terms of the fluid pressure at the stapes. Methods for determining the nonlinear damping directly from measurements are described. Once the oscillators have been characterized from their tone and click responses, the mechanical response of the cochlea to natural sounds may be computed numerically. Signal processing inspired by cochlear mechanics opens up a new area of nonlocal nonlinear time-frequency analysis.

  12. Nonlinear switching in a two-concentric-core chalcogenide glass optical fiber for passively mode-locking a fiber laser.

    Science.gov (United States)

    Nazemosadat, Elham; Mafi, Arash

    2014-08-15

    We propose an all-fiber mode-locking device, which operates based on nonlinear switching in a novel two-concentric-core fiber structure. The design is particularly attractive given the ease of fabrication and coupling to other components in a mode-locked fiber laser cavity. The nonlinear switching in this coupler is studied, and the relative power transmission is obtained. The analysis shows that this nonlinear switch is practical for mode-locking fiber lasers and is forgiving to fabrication errors.

  13. Nonlinear oscillations

    CERN Document Server

    Nayfeh, Ali Hasan

    1995-01-01

    Nonlinear Oscillations is a self-contained and thorough treatment of the vigorous research that has occurred in nonlinear mechanics since 1970. The book begins with fundamental concepts and techniques of analysis and progresses through recent developments and provides an overview that abstracts and introduces main nonlinear phenomena. It treats systems having a single degree of freedom, introducing basic concepts and analytical methods, and extends concepts and methods to systems having degrees of freedom. Most of this material cannot be found in any other text. Nonlinear Oscillations uses sim

  14. Nonlinear Science

    CERN Document Server

    Yoshida, Zensho

    2010-01-01

    This book gives a general, basic understanding of the mathematical structure "nonlinearity" that lies in the depths of complex systems. Analyzing the heterogeneity that the prefix "non" represents with respect to notions such as the linear space, integrability and scale hierarchy, "nonlinear science" is explained as a challenge of deconstruction of the modern sciences. This book is not a technical guide to teach mathematical tools of nonlinear analysis, nor a zoology of so-called nonlinear phenomena. By critically analyzing the structure of linear theories, and cl

  15. Nonlinear analysis

    CERN Document Server

    Nanda, Sudarsan

    2013-01-01

    "Nonlinear analysis" presents recent developments in calculus in Banach space, convex sets, convex functions, best approximation, fixed point theorems, nonlinear operators, variational inequality, complementary problem and semi-inner-product spaces. Nonlinear Analysis has become important and useful in the present days because many real world problems are nonlinear, nonconvex and nonsmooth in nature. Although basic concepts have been presented here but many results presented have not appeared in any book till now. The book could be used as a text for graduate students and also it will be useful for researchers working in this field.

  16. Nonlinear Photonics in Waveguides for Telecommunications

    Science.gov (United States)

    Herrera, Oscar D.

    design for a fast optical switch incorporating silicon as the passive waveguide structure and EO polymer as the active material. The design uses a simple directional coupler with coplanar electrodes and promises to have low cross-talk and high switching speed (on the order of nanoseconds). An initial design for a 1x2 switch is fabricated and tested, and future optimization processes are also presented.

  17. Multipolar nonlinear nanophotonics

    CERN Document Server

    Smirnova, Daria

    2016-01-01

    Nonlinear nanophotonics is a rapidly developing field with many useful applications for a design of nonlinear nanoantennas, light sources, nanolasers, sensors, and ultrafast miniature metadevices. A tight confinement of the local electromagnetic fields in resonant photonic nanostructures can boost nonlinear optical effects, thus offering versatile opportunities for subwavelength control of light. To achieve the desired functionalities, it is essential to gain flexible control over the near- and far-field properties of nanostructures. Thus, both modal and multipolar analyses are widely exploited for engineering nonlinear scattering from resonant nanoscale elements, in particular for enhancing the near-field interaction, tailoring the far-field multipolar interference, and optimization of the radiation directionality. Here, we review the recent advances in this recently emerged research field ranging from metallic structures exhibiting localized plasmonic resonances to hybrid metal-dielectric and all-dielectric...

  18. Ultra-low loss fully-etched grating couplers for perfectly vertical coupling compatible with DUV lithography tools

    Science.gov (United States)

    Dabos, G.; Pleros, N.; Tsiokos, D.

    2016-03-01

    Hybrid integration of VCSELs onto silicon-on-insulator (SOI) substrates has emerged as an attractive approach for bridging the gap between cost-effective and energy-efficient directly modulated laser sources and silicon-based PICs by leveraging flip-chip (FC) bonding techniques and silicon grating couplers (GCs). In this context, silicon GCs, should comply with the process requirements imposed by the complimentary-metal-oxide-semiconductor manufacturing tools addressing in parallel the challenges originating from the perfectly vertical incidence. Firstly, fully etched GCs compatible with deep-ultraviolet lithography tools offering high coupling efficiencies are imperatively needed to maintain low fabrication cost. Secondly, GC's tolerance to VCSEL bonding misalignment errors is a prerequisite for practical deployment. Finally, a major challenge originating from the perfectly vertical coupling scheme is the minimization of the direct back-reflection to the VCSEL's outgoing facet which may destabilize its operation. Motivated from the above challenges, we used numerical simulation tools to design an ultra-low loss, bidirectional VCSEL-to-SOI optical coupling scheme for either TE or TM polarization, based on low-cost fully etched GCs with a Si-layer of 340 nm without employing bottom reflectors or optimizing the buried-oxide layer. Comprehensive 2D Finite-Difference-Time- Domain simulations have been performed. The reported GC layout remains fully compatible with the back-end-of-line (BEOL) stack associated with the 3D integration technology exploiting all the inter-metal-dielectric (IMD) layers of the CMOS fab. Simulation results predicted for the first time in fully etched structures a coupling efficiency of as low as -0.87 dB at 1548 nm and -1.47 dB at 1560 nm with a minimum direct back-reflection of -27.4 dB and -14.2 dB for TE and TM polarization, respectively.

  19. 一类控制方向未知的非线性系统的输出调节%Output regulation of a class of nonlinear systems with an unknown control direction

    Institute of Scientific and Technical Information of China (English)

    张戌希

    2012-01-01

    The sign of the high-frequency gain of a nonlinear system provides the control direction, which cannot be precisely measured in solving actual problems. In this paper, a global robust output regulation problem of a class of uncertain nonlinear systems with an unknown control direction and a nonlinear exosystem was considered. Through an internal model, the robust output regulation problem was converted into a robust stabilization problem. Furthermore, a dynamic output feedback controller was designed by combining the procedures from the Nussbaum gain technique, adaptive control method, and robust stabilization technique. Simulation results validate the effectiveness of the proposed controller.%非线性系统高频增益的符号表示控制方向,在实际问题中难以精确测量.为了研究控制方向未知的一类具有非线性外部系统的不确定非线性系统全局鲁棒输出调节问题,通过设计一个内模系统将鲁棒输出调节问题转化为鲁棒稳定性问题,结合Nussbaum动态增益技术、自适应控制方法、鲁棒稳定性提出了一种动态输出反馈控制器.仿真结果验证了所提出控制器的有效性.

  20. Ultra-compact three-port trench-based photonic couplers in ion-exchanged glass waveguides

    Science.gov (United States)

    Liu, Ke; Huang, Hui; Mu, Si Xuan; Lin, Hai; MacFarlane, Duncan L.

    2013-11-01

    An ultra-compact three-port photonic coupler is proposed on a glass substrate based upon a principle of frustrated total internal reflection. A single slash shape narrow trench at the “T” intersection of two ion-exchanged waveguides forms the coupler and is aligned 45° to the waveguides. The three-dimensional finite difference time domain (FDTD) theory is used to simulate the parameterization of the coupler, such as splitting ratios and efficiency versus trench widths, trench lengths, trench locations, and trench angles. The waveguide model used in FDTD is based on an experimental condition of the K+-Na+ ion-exchange process. A single-mode 6 μm wide glass waveguide at 1550 nm wavelength is fabricated through the analysis of the effective index method. The numerical results show that the arbitrary splitting ratios may be controlled by trench widths and trench angles. Comparing to Si, InP and GaAs materials, trench-based coupler on glasses may readily achieve the manufacturability since the low index of glass waveguides results in a wider trench opening. Taking advantage of low loss ion-exchanged waveguides, the high efficiency and short interaction length photonic couplers have a great potential to be integrated for large scale glass-based photonic circuits.

  1. Single-etch subwavelength engineered fiber-chip grating couplers for 1.3 µm datacom wavelength band.

    Science.gov (United States)

    Benedikovic, Daniel; Alonso-Ramos, Carlos; Cheben, Pavel; Schmid, Jens H; Wang, Shurui; Halir, Robert; Ortega-Moñux, Alejandro; Xu, Dan-Xia; Vivien, Laurent; Lapointe, Jean; Janz, Siegfried; Dado, Milan

    2016-06-13

    We report, for the first time, on the design and experimental demonstration of fiber-chip surface grating couplers based on subwavelength grating engineered nanostructure operating in the low fiber chromatic dispersion window (around 1.3 μm wavelengths), which is of great interest for short-reach data communication applications. Our coupler designs meet the minimum feature size requirements of large-volume deep-ultraviolet stepper lithography processes. The fiber-chip couplers are implemented in a standard 220-nm-thick silicon-on-insulator (SOI) platform and are fabricated by using a single etch process. Several types of couplers are presented, specifically the uniform, the apodized, and the focusing designs. The measured peak coupling efficiency is -2.5 dB (56%) near the central wavelength of 1.3 μm. In addition, by utilizing the technique of the backside substrate metallization underneath the grating couplers, the coupling efficiency of up to -0.5 dB (89%) is predicted by Finite Difference Time Domain (FDTD) calculations.

  2. A new beat interference cancellation receiver with 3×3 optical coupler for the SSB-OOFDM signal with reduced guard band

    Science.gov (United States)

    Zhang, Ying; Ma, Jianxin

    2016-05-01

    In this paper, we present a new method to implement beat interference cancellation receiver (BICR) for single-sideband optical orthogonal frequency division multiplexing (SSB-OOFDM) signal, which improves the spectral efficiency (SE) by reducing the guard band (GB) between the optical carrier and the OOFDM signal while mitigating the impact of signal-signal beat interference (SSBI). This BICR structure is relatively simple using only an optical interleaver (IL), a 3×3 optical coupler (OC) and three photodiodes (PDs). A system simulation for the 40 Gbit/s 16-QAM SSB-OOFDM signal with the reduced GB is carried out to prove the feasibility of this new scheme. The simulation results show that our proposed BICR has a better performance to suppress SSBI and a higher SE than the conventional direct-detection receiver (CDDR) according to the EVMs and the constellations.

  3. Photonic crystal fiber design for broadband directional coupling

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper; Bang, Ole; Bjarklev, Anders Overgaard

    2004-01-01

    A novel design for a broadband directional coupler based on a photonic crystal fiber is investigated numerically. It is shown that suitable index-depressing doping of the core regions in an index-guiding twin-core photonic crystal fiber can stabilize the coupling coefficient between the cores over...

  4. Photonic crystal fiber design for broadband directional coupling

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper; Bang, Ole; Bjarklev, Anders Overgaard

    2004-01-01

    A novel design for a broadband directional coupler based on a photonic crystal fiber is investigated numerically. It is shown that suitable index-depressing doping of the core regions in an index-guiding twin-core photonic crystal fiber can stabilize the coupling coefficient between the cores over...

  5. Analyzing the effects of post couplers in DTL tuning by the equivalent circuit model

    OpenAIRE

    Jia, Xiaoyu; Zheng, Shuxin

    2013-01-01

    Stabilization of the accelerating field in Drift Tube Linac(DTL) is obtained by inserting Post Couplers(PCs).On the basis of the circuit model equivalent for the DTL with and without asymmetrical PCs, stabilization is deduced quantitatively: let $\\delta \\omega/\\omega_0$ be the relative frequency error, then we discover that the sensitivity of field to perturbation is proportional to $\\sqrt{\\delta \\omega / \\omega_0}$ without PCs and to $\\delta \\omega/\\omega_0$ with PCs. Then we adapt the circu...

  6. DESIGN OF V-BAND SUBSTRATE INTEGRATED WAVEGUIDE POWER DIVIDER, CIRCULATOR AND COUPLER

    Directory of Open Access Journals (Sweden)

    Bouchra Rahali

    2013-11-01

    Full Text Available Recently there is growing interest in a new technology, substrate integrated waveguide (SIW, it has been applied successfully to the conception of planar compact components for the microwave and millimeter waves applications. In this study, a V-band substrate integrated waveguide power divider, circulator and coupler are conceived and optimized by Ansoft HFSS code. Thus, through this modeling, design considerations and results are discussed and presented. Attractive features including compact size and planar form make these devices structure easily integrated in planar circuits.

  7. Expansive cement couplers: A means of pre-tensioning fibre-reinforced plastic tendons

    OpenAIRE

    1995-01-01

    This is the peer reviewed version of: Lees J.M., Gruffydd-Jones, B. and Burgoyne C.J. (1995) "Expansive Cement Couplers - A Means of Pre-tensioning Fibre-Reinforced Plastic Tendons", published in 'Construction and Building Materials', v. 9, is. 6, pp. 413-423 December 1995. The published version is at http://dx.doi.org/10.1016/0950-0618(95)00070-4 Fibre reinforced plastics describes a group of materials composed of inorganic or organic fibres embedded in a resin matrix. frps are strong, n...

  8. Bistable soliton states and switching in doubly inhomogeneously doped fiber couplers

    Indian Academy of Sciences (India)

    Ajit Kumar

    2001-11-01

    Switching between the bistable soliton states in a doubly and inhomogeneously doped fiber system is studied numerically. Both the cases of lossless as well as lossy couplers are considered. It is shown that both up-switching (from the low state to the high state) and down-switching (from the high state to the low state) of solitons between bistable states are realizable, if the amplification of the input soliton for up-switching and the extraction of energy from it for down-switching are suitably adjusted.

  9. Experience with the Vibrant Soundbridge RW-Coupler for round window Vibroplasty with tympanosclerosis

    OpenAIRE

    Iwasaki, Satoshi; Suzuki, Hiroaki; Moteki, Hideaki; Miyagawa, Maiko; Takumi, Yutaka; Usami, Shin-ichi

    2012-01-01

    Usage of the Vibrant Soundbridge (VSB) with round window (RW)-Coupler placement at the RW has been shown to successfully treat mixed hearing loss. Coupling between the VSB's floating mass transducer (FMT) and the RW membrane is difficult in the case of sclerosis in the RW and drilling down the bony lip until the RW membrane can be seen completely can possibly induce a perilymphatic fistula. A 68-year-old woman who had bilateral mixed hearing loss with sclerosis in the RW due to tympanoscleros...

  10. Circuit Methods for VLF Antenna Couplers. [for use in Loran or Omega receiver systems

    Science.gov (United States)

    Burhans, R. W.

    1977-01-01

    The limitations of different E-field antenna coupler or preamplifier circuits are presented. All circuits were evaluated using actual Loran or Omega signals. Electric field whip or wire antennas are the simplest types which can be used for reception of VLF signals in the 10 to 100 kHz range. JFET or MOSFET transistors provide impedance transformation and some voltage gain in simple circuits where the power for operating the preamplifier uses the same coaxial cable that feeds the signal back to the receiver. The circuit techniques provide useful alternative methods for Loran-Omega receiver system designers.

  11. Flip-chip assembly of VCSELs to silicon grating couplers via laser fabricated SU8 prisms.

    Science.gov (United States)

    Kaur, K S; Subramanian, A Z; Cardile, P; Verplancke, R; Van Kerrebrouck, J; Spiga, S; Meyer, R; Bauwelinck, J; Baets, R; Van Steenberge, G

    2015-11-02

    This article presents the flip-chip bonding of vertical-cavity surface-emitting lasers (VCSELs) to silicon grating couplers (GCs) via SU8 prisms. The SU8 prisms are defined on top of the GCs using non-uniform laser ablation process. The prisms enable perfectly vertical coupling from the bonded VCSELs to the GCs. The VCSELs are flip-chip bonded on top of the silicon GCs employing the laser-induced forward transfer (LIFT)-assisted thermocompression technique. An excess loss of transmission experiments performed on the bonded assemblies with clear eye openings up to 20 Gb/s are also presented.

  12. Silica-Based Arrayed Waveguide Grating with Flattened Spectral Response Using a Multimode Interference Coupler

    Institute of Scientific and Technical Information of China (English)

    TANG Yan-Zhe; JIA Ke-Miao; LI Bai-Yang; YANG Jian-Yi; JIANG Xiao-Qing; WU Ya-Ming; WANG Yue-Lin

    2004-01-01

    @@ We designed and fabricated an arrayed waveguide grating based on silica-on-silicon materials with flattened spectral response by adding a multimode interference coupler in the input region. The theoretical analysis and calculation are given. The device has worked effectively and has been tested with the passband 0.43 nm at 1 dB,0.72nm at 3dB and 1.56nm at 20dB respectively, at a cost of power penalty of about 1.5dB. The crosstalk is less than -30 dB, owing to the high-resolution photomask and well-controlled fabrication processes.

  13. Null Fiber Coupler with Ultra-high Splitting Ratio of 100000:1 for All-fiber Acousto-optic Switch

    Institute of Scientific and Technical Information of China (English)

    LI Tong; PENG Jiangde; LI Qun; LIU Xiaoming

    2000-01-01

    A fiber null coupler with very high splitting ratio of 100000: 1 and low excess loss of 0.1 dB is reported. The control of the maximum splitting ratio and loss of the null coupler is studied. Its switching function is experimentally demonstrated by acousto-optic modulation.

  14. Robust Nonlinear Neural Codes

    Science.gov (United States)

    Yang, Qianli; Pitkow, Xaq

    2015-03-01

    Most interesting natural sensory stimuli are encoded in the brain in a form that can only be decoded nonlinearly. But despite being a core function of the brain, nonlinear population codes are rarely studied and poorly understood. Interestingly, the few existing models of nonlinear codes are inconsistent with known architectural features of the brain. In particular, these codes have information content that scales with the size of the cortical population, even if that violates the data processing inequality by exceeding the amount of information entering the sensory system. Here we provide a valid theory of nonlinear population codes by generalizing recent work on information-limiting correlations in linear population codes. Although these generalized, nonlinear information-limiting correlations bound the performance of any decoder, they also make decoding more robust to suboptimal computation, allowing many suboptimal decoders to achieve nearly the same efficiency as an optimal decoder. Although these correlations are extremely difficult to measure directly, particularly for nonlinear codes, we provide a simple, practical test by which one can use choice-related activity in small populations of neurons to determine whether decoding is suboptimal or optimal and limited by correlated noise. We conclude by describing an example computation in the vestibular system where this theory applies. QY and XP was supported by a grant from the McNair foundation.

  15. Methods of nonlinear kinetics

    OpenAIRE

    Gorban, A. N.; Karlin, I.V.

    2003-01-01

    Nonlinear kinetic equations are reviewed for a wide audience of specialists and postgraduate students in physics, mathematical physics, material science, chemical engineering and interdisciplinary research. Contents: The Boltzmann equation, Phenomenology and Quasi-chemical representation of the Boltzmann equation, Kinetic models, Discrete velocity models, Direct simulation, Lattice Gas and Lattice Boltzmann models, Minimal Boltzmann models for flows at low Knudsen number, Other kinetic equati...

  16. Nonlinear optics

    CERN Document Server

    Boyd, Robert W

    2013-01-01

    Nonlinear Optics is an advanced textbook for courses dealing with nonlinear optics, quantum electronics, laser physics, contemporary and quantum optics, and electrooptics. Its pedagogical emphasis is on fundamentals rather than particular, transitory applications. As a result, this textbook will have lasting appeal to a wide audience of electrical engineering, physics, and optics students, as well as those in related fields such as materials science and chemistry.Key Features* The origin of optical nonlinearities, including dependence on the polarization of light* A detailed treatment of the q

  17. Monolithically integrated self-rolled-up microtube-based vertical coupler for three-dimensional photonic integration

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Xin; Arbabi, Ehsan; Goddard, Lynford L.; Li, Xiuling; Chen, Xiaogang, E-mail: oxgchen@illinois.edu [Department of Electrical and Computer Engineering, University of Illinois, Urbana, Illinois 61801 (United States)

    2015-07-20

    We demonstrate a self-rolled-up microtube-based vertical photonic coupler monolithically integrated on top of a ridge waveguide to achieve three-dimensional (3D) photonic integration. The fabrication process is fully compatible with standard planar silicon processing technology. Strong light coupling between the vertical coupler and the ridge waveguide was observed experimentally, which may provide an alternative route for 3D heterogeneous photonic integration. The highest extinction ratio observed in the transmission spectrum passing through the ridge waveguide was 23 dB.

  18. 1.28 Tbaud Nyquist-OTDM Transmission over a 7-Core Fiber Using an On-Chip SDM Coupler

    DEFF Research Database (Denmark)

    Hu, Hao; Medhin, Ashenafi Kiros; Ye, Feihong

    2014-01-01

    We have demonstrated the first 1.28-Tbaud Nyquist-OTDM-SDM transmission over a 67.4 - km seven-core fiber with an aggregated data rate of 7.2 Tbit/s using a silicon SDM coupler. 10 - GHz control pulses were transmitted through the center core......We have demonstrated the first 1.28-Tbaud Nyquist-OTDM-SDM transmission over a 67.4 - km seven-core fiber with an aggregated data rate of 7.2 Tbit/s using a silicon SDM coupler. 10 - GHz control pulses were transmitted through the center core...

  19. High-efficiency fully etched fiber-chip grating couplers with subwavelength structures for datacom and telecom applications

    Science.gov (United States)

    Benedikovic, Daniel; Cheben, Pavel; Schmid, Jens H.; Xu, Dan-Xia; Lapointe, Jean; Wang, Shurui; Janz, Siegfried; Halir, Robert; Ortega-Moñux, Alejandro; Dado, Milan

    2015-05-01

    Surface grating couplers are key components to couple light between planar waveguide circuits in silicon-on-insulator (SOI) platform and optical fibers. Here, we demonstrate by using simulations and experiments that a high coupling efficiency can be achieved for an arbitrary buried oxide thickness by judicious adjustment of the grating radiation angle. The coupler strength is engineered by subwavelength structures, which have pitch and feature sizes smaller than the wavelength of light propagating through it, thereby frustrating diffraction effects and behaving as a homogeneous media with an adjustable equivalent refractive index. This makes it possible to apodize the grating coupler with a preferred single etch fabrication process. The coupling efficiency of the grating coupler is optimized for operating with the transverse electric (TE) polarization state at the wavelengths near 1.3 µm and 1.55 µm, which are the bands relevant for datacom and telecom interconnects applications, respectively. The design and analysis of the grating coupler is carried out using two-dimensional (2-D) Fourier-eigenmode expansion method (F-EEM) and finite difference time domain (FDTD) method. The simulations show a peak fiber-chip coupling efficiency of ‒1:61 dB and ‒ 1:97 dB at 1.3 µm and 1.55 µm wavelengths, respectively, with a minimum feature size of 100 nm, compatible with 193 nm deep-ultraviolet (DUV) lithography. The measurements of our fabricated continuously apodized grating coupler demonstrate fiber-chip coupling efficiency of ‒ 2:16 dB at a wavelength near 1.55 µm with a 3 dB bandwidth of 64 nm. These results open promising prospects for low-cost and high-volume fabrication of surface grating couplers in SOI using 193 nm DUV lithography, which is now used in several silicon photonics foundries. It is also predicted that a coupling efficiency as high as ‒ 0:42 dB can be achieved for the coupler structure with a bottom dielectric mirror.

  20. Efficient silicon PIC mode multiplexer using grating coupler array with aluminum mirror for few-mode fiber

    DEFF Research Database (Denmark)

    Ding, Yunhong; Yvind, Kresten

    2015-01-01

    We demonstrate a silicon PIC mode multiplexer using grating couplers. An aluminum mirror is introduced for coupling efficiency improvement. A highest coupling efficiency of –10.6 dB with 3.7 dB mode dependent coupling loss is achieved.......We demonstrate a silicon PIC mode multiplexer using grating couplers. An aluminum mirror is introduced for coupling efficiency improvement. A highest coupling efficiency of –10.6 dB with 3.7 dB mode dependent coupling loss is achieved....

  1. Supercontinuum generation based on all-normal-dispersion Yb-doped fiber laser mode-locked by nonlinear polarization rotation: Influence of seed's output port

    Science.gov (United States)

    Xiao, Xiaosheng; Hua, Yi

    2016-10-01

    All-normal-dispersion (ANDi) mode-locked Yb-doped fiber laser is a promising seed source for supercontinuum (SC) generation, due to its compact structure and broadband output. The influences of output ports of the ANDi laser mode-locked by nonlinear polarization rotation (NPR), on the generated SC are investigated. Two output ports of ANDi laser are considered, one of which is the conventional nonlinear polarization rotation (NPR) port and the other is extracted from a coupler after the NPR port. It is found that, the SC originated from the coupler port is much broader than that from the NPR port, which is validated by lots of experiments with different output parameters. Furthermore, the conclusion is verified and generalized to general ANDi lasers by numerical simulations, because the output pulse from coupler port could be cleaner than that from NPR port. Besides, there are no significant differences in the phase coherence and temporal stability between the SCs generated from both ports. Hence for the SC generation based on ANDi laser, it is preferred to use the pulse of coupler port (i.e. pulse after NPR port) serving as the seed source.

  2. Suspended mid-infrared fiber-to-chip grating couplers for SiGe waveguides

    Science.gov (United States)

    Favreau, Julien; Durantin, Cédric; Fédéli, Jean-Marc; Boutami, Salim; Duan, Guang-Hua

    2016-03-01

    Silicon photonics has taken great importance owing to the applications in optical communications, ranging from short reach to long haul. Originally dedicated to telecom wavelengths, silicon photonics is heading toward circuits handling with a broader spectrum, especially in the short and mid-infrared (MIR) range. This trend is due to potential applications in chemical sensing, spectroscopy and defense in the 2-10 μm range. We previously reported the development of a MIR photonic platform based on buried SiGe/Si waveguide with propagation losses between 1 and 2 dB/cm. However the low index contrast of the platform makes the design of efficient grating couplers very challenging. In order to achieve a high fiber-to-chip efficiency, we propose a novel grating coupler structure, in which the grating is locally suspended in air. The grating has been designed with a FDTD software. To achieve high efficiency, suspended structure thicknesses have been jointly optimized with the grating parameters, namely the fill factor, the period and the grating etch depth. Using the Efficient Global Optimization (EGO) method we obtained a configuration where the fiber-to-waveguide efficiency is above 57 %. Moreover the optical transition between the suspended and the buried SiGe waveguide has been carefully designed by using an Eigenmode Expansion software. Transition efficiency as high as 86 % is achieved.

  3. Performance improvement of optical fiber coupler with electric heating versus gas heating.

    Science.gov (United States)

    Shuai, Cijun; Gao, Chengde; Nie, Yi; Peng, Shuping

    2010-08-20

    Gas heating has been widely used in the process of fused biconical tapering. However, as the instability and asymmetric flame temperature of gas heating exist, the performance of the optical devices fabricated by this method was affected. To overcome the problems resulting from gas combustion, an electric heater is designed and manufactured using a metal-ceramic (MoSi(2)) as a heating material. Our experimental data show that the fused-taper machine with an electric heater has improved the performance of optical devices by increasing the consistency of the extinction ratio, excess loss, and the splitting ratio over that of the previous gas heating mode. Microcrystallizations and microcracks were observed at the fused region of the polarization-maintaining (PM) fiber coupler and at the taper region with scanning electron microscopy and atomic force microscopy respectively. The distribution of the microcrystallizations and microcracks are nonuniform along the fiber with gas heating, while their distribution is rather uniform with electric heating. These findings show that the novel optical fiber coupler with an electric heater has improved the performance of optical fiber devices by affecting the consistency of the optical parameters and micromorphology of the surface of PM fiber.

  4. Nonlinear optimization

    CERN Document Server

    Ruszczynski, Andrzej

    2011-01-01

    Optimization is one of the most important areas of modern applied mathematics, with applications in fields from engineering and economics to finance, statistics, management science, and medicine. While many books have addressed its various aspects, Nonlinear Optimization is the first comprehensive treatment that will allow graduate students and researchers to understand its modern ideas, principles, and methods within a reasonable time, but without sacrificing mathematical precision. Andrzej Ruszczynski, a leading expert in the optimization of nonlinear stochastic systems, integrates t

  5. Nonlinear optics: the next decade.

    Science.gov (United States)

    Kivshar, Yuri S

    2008-12-22

    This paper concludes the Focus Serial assembled of invited papers in key areas of nonlinear optics (Editors: J.M. Dudley and R.W. Boyd), and it discusses new directions for future research in this field.

  6. Coupling analysis of non-circular-symmetric modes and design of orientation-insensitive few-mode fiber couplers

    Science.gov (United States)

    Li, Jiaxiong; Du, Jiangbing; Ma, Lin; Li, Ming-Jun; Jiang, Shoulin; Xu, Xiao; He, Zuyuan

    2017-01-01

    We study the coupling between two identical weakly-coupled few-mode fibers based on coupled-mode theory. The coupling behavior of non-circular-symmetric modes, such as LP11 and LP21, is investigated analytically and numerically. By carefully choosing the fiber core separation and coupler length, we can design orientation-insensitive fiber couplers for non-circular-symmetric modes at arbitrary coupling ratios. Based on the design method, we propose an orientation-insensitive two-mode fiber coupler at 850 nm working as a mode multiplexer/demultiplexer for two-mode transmission using standard single-mode fiber. Within the band from 845 to 855 nm, the insertion losses of LP01 and LP11 modes are less than 0.03 dB and 0.24 dB, respectively. When the two-mode fiber coupler is used as mode demultiplexer, the LP01/LP11 and LP11/LP01 extinction ratios in the separated branches are respectively above 12.6 dB and 21.2 dB. Our design method can be extended to two-mode communication or sensing systems at other wavelengths.

  7. Design and analysis of O-S-C triple band wavelength division demultiplexer using cascaded MMI couplers

    Science.gov (United States)

    Chack, Devendra; Kumar, V.; Raghuwanshi, Sanjeev Kumar; Singh, Dev Prakash

    2017-01-01

    Compact triple O-S-C band wavelength demultiplexer, which consists of series cascaded multimode interference (MMI) couplers has been carried out in this paper. The MMI coupler has been used to drop the wavelengths of 1510 nm and 1550 nm at bar port while the wavelength 1300 nm into the cross port. Then another MMI coupler has been designed to separate the wavelength 1510 nminto one port and wavelength 1550 nm into another port. The triple wavelength demultiplexer function has been performed by choosing a suitable refractive index of the guiding region and geometrical parameters such as the width and length of MMI coupler. Numerical simulation with finite difference beam propagation method (BPM) has been utilized to design and optimize the operation of the proposed triple wavelength demultiplexer. The simulation results show that insertion losses of wavelength O, S and C, bands are 1.884 dB, 1.452 dB and 2.568 dB, respectively, with isolations for each output waveguide ranging from 10 dB to 28.72 dB. The 3-dB bandwidth of insertion loss for 1300 nm, 1510 nm and 1550 nm are 80 nm, 20 nm and 10 nm, respectively.

  8. Multipacting Simulations of Tuner-adjustable waveguide coupler (TaCo) with CST Particle Studio®

    CERN Document Server

    Shafqat, N; Wegner, R

    2014-01-01

    Tuner-adjustable waveguide couplers (TaCo) are used to feed microwave power to different RF structures of LINAC4. This paper studies the multipacting phenomenon for TaCo using the PIC solver of CST PS. Simulations are performed for complete field sweeps and results are analysed.

  9. Finite element analysis of coupler carrier forming%车钩托板成形有限元分析

    Institute of Scientific and Technical Information of China (English)

    牛士军; 栾小东

    2015-01-01

    传统车钩托板采用热压成形工艺 ,工艺方法落后 ,生产效率低 ,耗能较大.本文通过DYNAFORM 有限元软件平台 ,对车钩托板冷压成形工艺进行模拟 ,分析其成形工艺特点 ,通过对成形、回弹过程的数值模拟 ,得到了车钩托板冷压成形的理论依据.经实践证明 :车钩托板冷压成形工艺 ,明显提高了生产效率并降低了耗能.%Traditionally ,thermoforming process is used to produce coupler carrier ,but it is of backward ,low productivity ,and large energy consumption .In this paper ,the cold form-ing process of coupler carrier was simulated to analyze the forming process characteristics based on finite element software platform DYNAFORM .Through the simulation of form-ing and springback process , the theoretical basis of cold forming of coupler carrier was obtained .Practice has proved that the cold forming process of coupler carrier can signifi-cantly improve productivity and reduce energy consumption .

  10. Experimental test of a supercritical helium heat exchanger dedicated to EUROTRANS 150 kW CW power coupler

    Science.gov (United States)

    Souli, M.; Fouaidy, M.; Hammoudi, N.

    2010-05-01

    The coaxial power coupler needed for beta = 0.65 superconducting RF cavities used in the high energy section of the EUROTRANS driver should transmit 150 kW (CW operation) RF power to the proton beam. The estimated RF losses on the power coupler outer conductor in standing wave mode operation are 46 W. To remove these heat loads, a full scale copper coil heat exchanger brazed around the outer conductor was designed and tested using supercritical helium at T = 6 K as a coolant. Our main objective was to minimise the heat loads to cold extremity of SRF cavity maintained at 2 K or 4.2 K. A dedicated test facility named SUPERCRYLOOP was developed and successfully operated in order to measure the performance of the cold heat exchanger. The test cell used reproduces the realistic thermal boundary conditions of the power coupler mounted on the cavity in the cryomodule. After a short introduction, a brief discussion about the problem of power coupler cooling systems in different machines is made. After that, we describe the experimental set-up and test apparatus. Then, a heat exchanger thermal model will be developed with FEM code COSMOS/M to estimate the different heat transfer coefficients by comparison between numerical simulation results and experimental data in order to validate the design. Finally, thermo-hydraulic behavior of supercritical helium has been investigated as function of different parameters (inlet pressure, flow rate, heat loads).

  11. Nonlinear channelizer

    Science.gov (United States)

    In, Visarath; Longhini, Patrick; Kho, Andy; Neff, Joseph D.; Leung, Daniel; Liu, Norman; Meadows, Brian K.; Gordon, Frank; Bulsara, Adi R.; Palacios, Antonio

    2012-12-01

    The nonlinear channelizer is an integrated circuit made up of large parallel arrays of analog nonlinear oscillators, which, collectively, serve as a broad-spectrum analyzer with the ability to receive complex signals containing multiple frequencies and instantaneously lock-on or respond to a received signal in a few oscillation cycles. The concept is based on the generation of internal oscillations in coupled nonlinear systems that do not normally oscillate in the absence of coupling. In particular, the system consists of unidirectionally coupled bistable nonlinear elements, where the frequency and other dynamical characteristics of the emergent oscillations depend on the system's internal parameters and the received signal. These properties and characteristics are being employed to develop a system capable of locking onto any arbitrary input radio frequency signal. The system is efficient by eliminating the need for high-speed, high-accuracy analog-to-digital converters, and compact by making use of nonlinear coupled systems to act as a channelizer (frequency binning and channeling), a low noise amplifier, and a frequency down-converter in a single step which, in turn, will reduce the size, weight, power, and cost of the entire communication system. This paper covers the theory, numerical simulations, and some engineering details that validate the concept at the frequency band of 1-4 GHz.

  12. Fabrication defects and grating couplers in III-nitride photonic crystal nanobeam lasers (Conference Presentation)

    Science.gov (United States)

    Rousseau, Ian; Sánchez Arribas, Irene; Carlin, Jean-François; Butté, Raphaël.; Grandjean, Nicolas

    2016-04-01

    We report a numerical and experimental investigation of fabrication tolerances and outcoupling in optically pumped III-nitride nanolasers operating near λ = 460 nm, in which feedback is provided by a one-dimensional photonic crystal nanobeam cavity and gain is supplied by a single InGaN/GaN quantum well. Using this platform, we and others previously demonstrated single-μW lasing thresholds due to the high βQ-product inherent to the nanobeam geometry (β is spontaneous emission coupling fraction into desired mode). In this work, we improved the fraction of emission emitted into our microscope's light cone by combining a redesigned photonic crystal cavity (c.f. [3]) with a cross-grating coupler with period approximately twice the photonic crystal lattice constant. The samples were fabricated in epitaxial III-nitride layers grown on (111) silicon substrates using metal organic vapor phase epitaxy. The photonic crystal and output couplers were patterned using a single electron beam lithography exposure and subsequently transferred to the underlying III-nitride layers using dry etching. The nanobeams were then suspended via vapor phase etching of silicon in XeF2. Scanning electron microscopy cross-sections revealed high-aspect ratio (>5), sub-70 nanometer diameter holes with near-vertical sidewalls. Fabrication-induced geometry errors were characterized by processing scanning electron micrographs with custom critical dimension software. Using UV micro-photoluminescence spectroscopy at room temperature, we measured the nanobeams' emission intensity, far-field profile, and quality factor. By comparing more than ten nominally identical nanobeams for each geometry with finite-difference time-domain simulations taking into account the geometrical deviations measured during fabrication, we characterized the role of fabrication-induced imperfections. Finally, we explored the trade-off between the quality factor and collected signal via lithographic variations of the output

  13. Coupling Characteristics of Fused Optical Fiber Coupler Formed with Single-Mode Fiber and Photonic Crystal Fiber Having Air Hole Collapsed Taper

    Directory of Open Access Journals (Sweden)

    Hirohisa Yokota

    2016-01-01

    Full Text Available Fused coupler forming with a single-mode fiber (SMF and a photonic crystal fiber (PCF is one of the solutions for optical coupling from a light source to a PCF. In this paper, we presented coupling characteristics of a fused fiber coupler formed with an ordinary SMF and a PCF having air hole collapsed taper. A prototype of SMF-PCF coupler with air hole collapsed taper was fabricated using CO2 laser irradiation. The coupling efficiency from SMF to PCF was −6.2 dB at 1554 nm wavelength in the fabricated coupler. The structure of the SMF-PCF coupler to obtain high coupling efficiency was theoretically clarified by beam propagation analysis using an equivalent model of the coupler with simplification. It was clarified that appropriately choosing the prestretched or etched SMF diameter and the length of air hole collapsed region was effective to obtain high coupling efficiency that was a result of high extinction ratio at cross port and low excess loss. We also demonstrated that the diameter of prestretched SMF to obtain high coupling efficiency was insensitive to the air hole diameter ratio to pitch of the PCF in the air hole collapsed SMF-PCF coupler.

  14. Nonlinear dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Turchetti, G. (Bologna Univ. (Italy). Dipt. di Fisica)

    1989-01-01

    Research in nonlinear dynamics is rapidly expanding and its range of applications is extending beyond the traditional areas of science where it was first developed. Indeed while linear analysis and modelling, which has been very successful in mathematical physics and engineering, has become a mature science, many elementary phenomena of intrinsic nonlinear nature were recently experimentally detected and investigated, suggesting new theoretical work. Complex systems, as turbulent fluids, were known to be governed by intrinsically nonlinear laws since a long time ago, but received purely phenomenological descriptions. The pioneering works of Boltzmann and Poincare, probably because of their intrinsic difficulty, did not have a revolutionary impact at their time; it is only very recently that their message is reaching a significant number of mathematicians and physicists. Certainly the development of computers and computer graphics played an important role in developing geometric intuition of complex phenomena through simple numerical experiments, while a new mathematical framework to understand them was being developed.

  15. An Efficient Large-Area Grating Coupler for Surface Plasmon Polaritons

    CERN Document Server

    Koev, Stephan T; Lezec, Henri J; Aksyuk, Vladimir A

    2011-01-01

    We report the design, fabrication and characterization of a periodic grating of shallow rectangular grooves in a metallic film with the goal of maximizing the coupling efficiency of an extended plane wave (PW) of visible or near-infrared light into a single surface plasmon polariton (SPP) mode on a flat metal surface. A PW-to-SPP power conversion factor > 45 % is demonstrated at a wavelength of 780 nm, which exceeds by an order of magnitude the experimental performance of SPP grating couplers reported to date at any wavelength. Conversion efficiency is maximized by matching the dissipative SPP losses along the grating surface to the local coupling strength. This critical coupling condition is experimentally achieved by tailoring the groove depth and width using a focused ion beam.

  16. Analyzing the effects of post couplers in DTL tuning by the equivalent circuit model

    CERN Document Server

    Jia, Xiaoyu

    2013-01-01

    Stabilization of the accelerating field in Drift Tube Linac(DTL) is obtained by inserting Post Couplers(PCs).On the basis of the circuit model equivalent for the DTL with and without asymmetrical PCs, stabilization is deduced quantitatively: let $\\delta \\omega/\\omega_0$ be the relative frequency error, then we discover that the sensitivity of field to perturbation is proportional to $\\sqrt{\\delta \\omega / \\omega_0}$ without PCs and to $\\delta \\omega/\\omega_0$ with PCs. Then we adapt the circuit model of symmetrical PCs for the case of asymmetrical PCs. The circuit model shows how the slope of field distribution is changed by rotating the asymmetrical PCs and illustrates that the asymmetrical PCs have the same effect as the symmetrical ones in stabilization.

  17. Analyzing the effects of post couplers in DTL tuning by the equivalent circuit model

    Science.gov (United States)

    Jia, Xiao-Yu; Zheng, Shu-Xin

    2013-12-01

    Stabilization of the accelerating field in Drift Tube Linac(DTL) is obtained by inserting Post Couplers(PCs). On the basis of the equivalent circuit model for the DTL with and without asymmetrical PCs, stabilization is deduced quantitatively: we let δω/ω0 be the relative frequency error, then we discover that the sensitivity of field to perturbation is proportional to without PCs and to δω/ω0 with PCs. Then we adapt the circuit model of symmetrical PCs for the case of asymmetrical PCs. The circuit model shows how the slope of field distribution is changed by rotating the asymmetrical PCs and illustrates that the asymmetrical PCs have the same effect as the symmetrical ones in stabilization.

  18. Ultrasensitive optical microfiber coupler based sensors operating near the turning point of effective group index difference

    Science.gov (United States)

    Li, Kaiwei; Zhang, Ting; Liu, Guigen; Zhang, Nan; Zhang, Mengying; Wei, Lei

    2016-09-01

    We propose and study an optical microfiber coupler (OMC) sensor working near the turning point of effective group index difference between the even supermode and odd supermode to achieve high refractive index (RI) sensitivity. Theoretical calculations reveal that infinite sensitivity can be obtained when the measured RI is close to the turning point value. This diameter-dependent turning point corresponds to the condition that the effective group index difference equals zero. To validate our proposed sensing mechanism, we experimentally demonstrate an ultrahigh sensitivity of 39541.7 nm/RIU at a low ambient RI of 1.3334 based on an OMC with the diameter of 1.4 μm. An even higher sensitivity can be achieved by carrying out the measurements at RI closer to the turning point. The resulting ultrasensitive RI sensing platform offers a substantial impact on a variety of applications from high performance trace analyte detection to small molecule sensing.

  19. Optimization of optical filter using triple coupler ring resonators structure based on polyimide substrate

    Science.gov (United States)

    Mahmudin, D.; Estu, T. T.; Fathnan, A. A.; Maulana, Y. Y.; Daud, P.; Sugandhi, G.; Wijayanto, Y. N.

    2016-11-01

    Optical filter is very important components in WDM network. MRR is a basic structure to design the optical filter because of easy to design for improving its performance. This paper discusses an innovative structure of the MRR, which is Triple Coupler Ring Resonators (TCRR) for optical filter applications. Values of width between bus and ring and values of radius of the ring in the structure TCRR were analyzed and optimized for several variations for obtaining coupling coefficient values. Therefore, wide Free Spectral Range (FSR) and high crosstalk suppression bandwidth can be obtained. As results, at the optimized width of gap of 100 nm and the optimized radiation of 8 μm, FSR of 2.85 THz and crosstalk suppression bandwidth of 60 GHz were achieved. Based on the results, this structure can be used for filtering optical signals in optical fiber communication.

  20. On the Bandgap quantum coupler and the harmonic oscillator interacting with a reservoir

    CERN Document Server

    Quijas, P C G

    2007-01-01

    In order to be able to study dissipation, the interaction between a single system and their environment was introduced in quantum mechanics. Master and quantum Langeving equations was derived and, also, decoherence was studied using this approach. One of the most used model in this field of research is a single harmonic oscillator interacting with an infinite number of harmonic oscillators. In this work we analytically solve, with the evolution operator method, the Schrodinger equation for this model in the case of resonance. Also we address a different aspect of the quantum computing with linear optics. That is, we propose the linear bandgap quantum coupler, in the cases N=2 and N=3, to generate a new phase operator $U_{dp}^{\\pi} $ working on the two and three qubits basis like an alternative realization of a quantum phase gate.

  1. A gold hybrid structure as optical coupler for quantum well infrared photodetector

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Jiayi; Li, Qian; Jing, Youliang [National Laboratory for Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, 500 Yu Tian Road, Shanghai 200083 (China); Chen, Xiaoshuang, E-mail: xschen@mail.sitp.ac.cn; Li, Zhifeng; Li, Ning; Lu, Wei [National Laboratory for Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, 500 Yu Tian Road, Shanghai 200083 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China)

    2014-08-28

    A hybrid structure consisting of a square lattice of gold disk arrays and an overlaying gold film is proposed as an optical coupler for a backside-illuminated quantum well infrared photodetector (QWIP). Finite difference time-domain method is used to numerically simulate the reflection spectra and the field distributions of the hybrid structure combined with the QWIP device. The results show that the electric field component perpendicular to the quantum well is strongly enhanced when the plasmonic resonant wavelength of the hybrid structure coincides with the response one of the quantum well infrared photodetector regardless of the polarization of the incident light. The effect of the diameter and thickness of an individual gold disk on the resonant wavelength is also investigated, which indicates that the localized surface plasmon also plays a role in the light coupling with the hybrid structure. The coupling efficiency can exceed 50 if the structural parameters of the gold disk arrays are well optimized.

  2. PT-symmetric coupler with a coupling defect: soliton interaction with exceptional point

    CERN Document Server

    Bludov, Yuli V; Huang, Guoxiang; Konotop, Vladimir V

    2014-01-01

    We study interaction of a soliton in a parity-time (PT) symmetric coupler which has local perturbation of the coupling constant. Such a defect does not change the PT-symmetry of the system, but locally can achieve the exceptional point. We found that the symmetric solitons after interaction with the defect either transform into breathers or blow up. The dynamics of anti-symmetric solitons is more complex, showing domains of successive broadening of the beam and of the beam splitting in two outwards propagating solitons, in addition to the single breather generation and blow up. All the effects are preserved when the coupling strength in the center of the defect deviates from the exceptional point. If the coupling is strong enough the only observable outcome of the soliton-defect interaction is the generation of the breather.

  3. Floquet control of the gain and loss in a PT-symmetric optical coupler

    Science.gov (United States)

    Wu, Yi; Zhu, Bo; Hu, Shu-Fang; Zhou, Zheng; Zhong, Hong-Hua

    2017-02-01

    Controlling the balanced gain and loss in a PT-symmetric system is a rather challenging task. Utilizing Floquet theory, we explore the constructive role of periodic modulation in controlling the gain and loss of a PT-symmetric optical coupler. It is found that the gain and loss of the system can be manipulated by applying a periodic modulation. Further, such an original non-Hermitian system can even be modulated into an effective Hermitian system derived by the high-frequency Floquet method. Therefore, compared with other PT symmetry control schemes, our protocol can modulate the unbroken PT-symmetric range to a wider parameter region. Our results provide a promising approach for controlling the gain and loss of a realistic system.

  4. Behavioral Modeling of a C-Band Ring Hybrid Coupler Using Artificial Neural Networks

    Directory of Open Access Journals (Sweden)

    E. Demircioglu

    2010-12-01

    Full Text Available Artificial Neural Networks (ANNs gained importance on the RF microwave (MW design area and behavioral modeling of MW components in the past few decades. This paper presents a cost effective neural network (NN approach to overcome design, modeling and optimization problems of an 180deg ring hybrid coupler operating in C-Band. The proposed NN model is trained by data sets obtained from electromagnetic (EM simulators and neural test results are compared with simulator findings to determine the network accuracy. Moreover, necessary trade-offs are applied to improve the networks’ performance. Finally correlation factors, which are defined as comparison criteria between EM-simulator and proposed neural models, are calculated for each trade-off case.

  5. Broadband Dual Circularly Polarized Magnetoelectric Dipole Antenna Fed by a Miniaturized Six-Branch Hybrid Coupler

    Directory of Open Access Journals (Sweden)

    Changhong Zhang

    2016-01-01

    Full Text Available A broadband dual circularly polarized magnetoelectric dipole antenna (MEDA fed by a miniaturized six-branch hybrid coupler (SBHC is presented in this paper. First, a dual linearly polarized MEDA with a bandwidth of 73.3% is developed based on the previous design with a bandwidth of 52%. The SBHC, with a miniaturized size of 53%, is designed on a printed circuit board underneath the ground of the MEDA, which possesses an efficient bandwidth of 80.7% to generate the antenna for dual circular polarization. Measurement results show that the proposed dual circularly polarized MEDA achieves an impedance bandwidth of 84.5%, an axial-ratio bandwidth of 81.8%, and a nearly symmetrical, stable unidirectional radiation pattern with an average gain of 8 dBic over its impedance bandwidth.

  6. Influence of offset stem couplers in femoral revision knee arthroplasty: a radiographic study.

    Science.gov (United States)

    Brilhault, Jean M; Ries, Michael D

    2012-03-01

    We questioned whether the use of offset femoral stem would result in modifying the posterior femoral condylar offset (PFCO) in revision knee arthroplasty (RTKA). We measured both PFCO and stem alignment on lateral radiographs of two cohorts: 91 knees with straight stems and 35 knees with offset coupled stems. A higher PCOR was observed in knees with an offset stem compared to knees with straight stem. Knees with an offset stem had a better alignment within the intramedullary canal. Our conclusion is that the use of a modular offset coupler with femoral stem in RTKA compared to a modular straight stem both increases the posterior condylar offset and improves alignment of the stem within the intramedullary canal.

  7. An Easily Operating Polymer 1×4 Optical Waveguide Switch Matrix Based on Vertical Couplers

    Institute of Scientific and Technical Information of China (English)

    Kaixin Chen; Pak L Chu; Hau Ping Chan; Kin S. Chiang

    2007-01-01

    A three-dimensional (3D) polymer thermo-optic (TO) 1×4 waveguide switch matrix based on vertical couplers is demonstrated. It consists of four basic 3D switch units and because of its 3D structure, its construction is compact, only 9mm in length; moreover, the control logic of the entire switch is very simple, the light signal can be easily switched to any output port by operating only a single switch unit. The finished devices exhibit a switching extinction ratio greater than 21 dB for all of four output ports and the crosstalk between two adjacent output ports is lower than n for all switching units is about 50 mW.

  8. The Design of a Five-Cell Superconducting RF Module with a PBG Coupler Cell

    Energy Technology Data Exchange (ETDEWEB)

    Arsenyev, Sergey A [Los Alamos National Laboratory; Simakov, Evgenya I [Los Alamos National Laboratory

    2012-08-29

    We discuss the problem of incorporating a Photonic Band Gap (PBG) cell into a superconducting accelerating module of 5 cells designed for the operational frequency of 2.1 GHz. The reason for using a PBG cell is to provide a good accelerating mode confinement and good Higher Order Mode (HOM) suppression. PBG cell can potentially be used for placing HOM and fundamental mode couplers. However, because of the naturally higher ratio of the peak magnetic field to the accelerating field in the PBG cell, it should be designed to operate at a lower accelerating gradient than the other cells of the module. This ensures that the probability of quench in the PBG cell would be no higher than in other elliptical cells of the structure.

  9. High Power Tm3+-Doped Fiber Lasers Tuned by a Variable Reflective Output Coupler

    Directory of Open Access Journals (Sweden)

    Yulong Tang

    2008-01-01

    Full Text Available Wide wavelength tuning by a variable reflective output coupler is demonstrated in high-power double-clad Tm3+-doped silica fiber lasers diode-pumped at ∼790  nm. Varying the output coupling from 96% to 5%, the laser wavelength is tuned over a range of 106  nm from 1949 to 2055  nm. The output power exceeds 20  W over 90-nm range and the maximum output power is 32  W at 1949  nm for 51-W launched pump power, corresponding to a slope efficiency of ∼70%. Assisted with different fiber lengths, the tuning range is expanded to 240  nm from 1866 to 2107  nm with the output power larger than 10  W.

  10. A numerical method for determining the radial wave motion correction in plane wave couplers

    DEFF Research Database (Denmark)

    Cutanda Henriquez, Vicente; Barrera Figueroa, Salvador; Torras Rosell, Antoni

    2016-01-01

    solution is an analytical expression that estimates the difference between the ideal plane wave sound field and a more complex lossless sound field created by a non-planar movement of the microphone’s membranes. Alternatively, a correction may be calculated numerically by introducing a full model......Microphones are used for realising the unit of sound pressure level, the pascal (Pa). Electro-acoustic reciprocity is the preferred method for the absolute determination of the sensitivity. This method can be applied in different sound fields: uniform pressure, free field or diffuse field. Pressure...... calibration, carried out in plane wave couplers, is the most extended. Here plane wave propagation is assumed. While this assumption is valid at low and mid frequencies, it fails at higher frequencies because the membrane of the microphones is not moving uniformly, and there are viscous losses. An existing...

  11. Chalcogenide glass planar MIR couplers for future chip based Bracewell interferometers

    CERN Document Server

    Goldsmith, Harry-Dean Kenchington; Ireland, Michael; Ma, Pan; Tuthill, Peter; Eggleton, Ben; Lawrence, John S; Debbarma, Sukanta; Luther-Davies, Barry; Madden, Stephen J

    2016-01-01

    Photonic integrated circuits are established as the technique of choice for a number of astronomical processing functions due to their compactness, high level of integration, low losses, and stability. Temperature control, mechanical vibration and acoustic noise become controllable for such a device enabling much more complex processing than can realistically be considered with bulk optics. To date the benefits have mainly been at wavelengths around 1550 nm but in the important Mid-Infrared region, standard photonic chips absorb light strongly. Chalcogenide glasses are well known for their transparency to beyond 10000 nm, and the first results from coupler devices intended for use in an interferometric nuller for exoplanetary observation in the Mid-Infrared L band (3800-4200 nm) are presented here showing that suitable performance can be obtained both theoretically and experimentally for the first fabricated devices operating at 4000 nm.

  12. A subwavelength structured multimode interference coupler for the 3-4 micrometers mid-infrared band

    Science.gov (United States)

    Sánchez-Postigo, Alejandro; Wangüemert-Pérez, Juan Gonzalo; Halir, Robert; Ortega-Moñux, Alejandro; Alonso-Ramos, Carlos A.; Molina-Fernández, Íñigo; Soler Penadés, Jordi; Nedeljkovic, Milos; Mashanovich, Goran Z.; Cheben, Pavel

    2015-05-01

    The mid-infrared is attracting increasing attention since many molecules, including potentially hazardous gases such as methane and carbon dioxide, exhibit very specific absorption spectra in this wavelength region. Integrated silicon photonics circuits are envisioned to enable compact and low-cost measurement solutions for these molecules. Multimode interference couplers (MMIs) are basic building blocks for photonic circuits and a broad operational bandwidth is key if flexible operation is to be achieved, e.g. to detect different gases. Here we overcome the bandwidth limitations found in classical MMIs by segmenting the multimode region at a sub-wavelength pitch to engineer its refractive index and dispersion. We achieve less than 0:5 dB imbalance and excess loss in the complete 3 ̶ 4 µm wavelength range. The sub-wavelength MMI not only exhibits nearly threefold improvement in bandwidth, but is also about three times shorter than the conventional device.

  13. Tolerance study for the components of the probe-type and hook-type Higher Order Mode couplers for the HL-LHC 800 MHz harmonic system

    CERN Document Server

    Blanco, Esteban

    2016-01-01

    A superconducting 800 MHz second harmonic RF system is one of the considered options as a Landau damping mechanism for HiLumi LHC. The Higher Order Mode (HOM) coupler designs require tight manufacturing tolerances in order to operate at the design specifications. The project consists of defining the mechanical tolerances for the different components of both the probe-type and hook-type HOM coupler. With the use of electromagnetic field simulation software it is possible to identify the critical components of the HOM coupler and to quantify their respective tolerances. The obtained results are discussed in this paper.

  14. All-fiber mode selective couplers for mode-division-multiplexed optical transmission

    Science.gov (United States)

    Chang, Sun Hyok; Kim, Kwangjoon; Lee, Joon Ki

    2017-01-01

    All-fiber mode selective coupler (MSC) is comprised of a few mode fiber (FMF) and a single mode fiber (SMF), coupling the LP01 mode of the SMF to a specific higher-order mode (HOM) of the FMF. In order to achieve high coupling ratio and low insertion loss, phase-matching condition between the LP01 mode of SMF arm and the HOM of FMF arm should be satisfied. A polished-type MSC is made by getting their cores into intimate contact. Prism coupling with a polished coupler block can measure the effective refractive index of the mode accurately. We propose and demonstrate three kinds of allfiber mode multiplexer that is composed of consecutive MSCs. 4-mode multiplexer can multiplex 4 modes of LP01, LP11, LP21, and LP02 by cascading LP11, LP21, and LP02 MSCs. It is used for MDM transmission of three modes with 120 Gb/s DP-QPSK signals. In order to enhance the signal transmission performance by receiving degenerate LP modes simultaneously, a mode multiplexer to utilize two-fold degenerate LP11 modes is proposed. It is composed of two consecutive LP11 MSCs that allows the multiplexing of LP01 mode and two orthogonal LP11 modes. We demonstrates WDM transmission of 30 wavelength channels with 33.3 GHz spacing, each carrying 3 modes, over 560 km of FMF. 6- mode multiplexer can multiplex 6 modes of LP01, LP11a, LP11b, LP21a, LP21b, LP02 modes. We demonstrated WDM-MDM transmission with the all-fiber 6-mode multiplexer. In this paper, the manufacturing method and the recent advancements of the all-fiber mode multiplexer based on the MSCs are reviewed. Long-distance mode division multiplexing (MDM) optical signal transmissions with the all-fiber mode multiplexer are experimentally demonstrated.

  15. Nonlinear Systems.

    Science.gov (United States)

    Seider, Warren D.; Ungar, Lyle H.

    1987-01-01

    Describes a course in nonlinear mathematics courses offered at the University of Pennsylvania which provides an opportunity for students to examine the complex solution spaces that chemical engineers encounter. Topics include modeling many chemical processes, especially those involving reaction and diffusion, auto catalytic reactions, phase…

  16. Asymptotic expansions in nonlinear rotordynamics

    Science.gov (United States)

    Day, William B.

    1987-01-01

    This paper is an examination of special nonlinearities of the Jeffcott equations in rotordynamics. The immediate application of this analysis is directed toward understanding the excessive vibrations recorded in the LOX pump of the SSME during hot-firing ground testing. Deadband, side force, and rubbing are three possible sources of inducing nonlinearity in the Jeffcott equations. The present analysis initially reduces these problems to the same mathematical description. A special frequency, named the nonlinear natural frequency, is defined and used to develop the solutions of the nonlinear Jeffcott equations as singular asymptotic expansions. This nonlinear natural frequency, which is the ratio of the cross-stiffness and the damping, plays a major role in determining response frequencies.

  17. Symmetrical waveguide devices fabricated by direct UV writing

    DEFF Research Database (Denmark)

    Færch, Kjartan Ullitz; Svalgaard, Mikael

    2002-01-01

    Power splitters and directional couplers fabricated by direct UV writing in index matched silica-on-silicon samples can suffer from an asymmetrical device performance, even though the UV writing is carried out in a symmetrical fashion. This effect originates from a reduced photosensitivity...... in the vicinity of previous exposed areas. The imbalance can be counteracted by an appropriate reduction of the applied scan velocity in areas, where a previous scan has been carried out nearby...

  18. FPC and Hi-Pass Filter HOM Coupler Design for the RF Dipole Crab Cavity for the LHC HiLumi Upgrade

    CERN Document Server

    Li, Z; Delayen, Jean Roger; De Silva, S U; Park, HyeKyoung; Olave, R G

    2015-01-01

    A 400-MHz compact RF dipole (RFD) crab cavity design was jointly developed by Old Dominion University and SLAC under the support of US LARP program for the LHC HiLumi upgrade. The RFD cavity design is consisted of a rounded-square tank and two ridged deflecting poles, operating with a TE11-like dipole mode, which is the lowest mode of the cavity. A prototype RFD cavity is being manufactured and will be tested on the SPS beam line at CERN. The coaxial fundamental Power Coupler (FPC) of the prototype cavity was re-optimized to minimizing the power heating on the coupler internal antenna. A hi-pass filter HOM damping coupler was developed to achieve the required wakefield damping while maintaining a compact size to fit into the beam line space. In this paper, we will discuss the details of the RF optimization and tolerance analyses of the FPC and HOM couplers.

  19. Robust Non-Linear Direct Torque and Flux Control of Adjustable Speed Sensorless PMSM Drive Based on SVM Using a PI Predictive Controller

    Directory of Open Access Journals (Sweden)

    F. Naceri

    2010-01-01

    Full Text Available This paper presents a new sensorless direct torque control method for voltage inverter – fed PMSM. The control methodis used a modified Direct Torque Control scheme with constant inverter switching frequency using Space Vector Modulation(DTC-SVM. The variation of stator and rotor resistance due to changes in temperature or frequency deteriorates theperformance of DTC-SVM controller by introducing errors in the estimated flux linkage and the electromagnetic torque.As a result, this approach will not be suitable for high power drives such as those used in tractions, as they require goodtorque control performance at considerably lower frequency. A novel stator resistance estimator is proposed. The estimationmethod is implemented using the Extended Kalman Filter. Finally extensive simulation results are presented to validate theproposed technique. The system is tested at different speeds and a very satisfactory performance has been achieved.

  20. Nonlinear PDEs

    OpenAIRE

    2015-01-01

    From the Back Cover: The emphasis throughout the present volume is on the practical application of theoretical mathematical models helping to unravel the underlying mechanisms involved in processes from mathematical physics and biosciences. It has been conceived as a unique collection of abstract methods dealing especially with nonlinear partial differential equations (either stationary or evolutionary) that are applied to understand concrete processes involving some important applications re...