WorldWideScience

Sample records for non-metallic minerals industry

  1. Energy Consumption and Carbon Dioxide Emissions of China’s Non-Metallic Mineral Products Industry: Present State, Prospects and Policy Analysis

    Directory of Open Access Journals (Sweden)

    Hui Hu

    2014-11-01

    Full Text Available China is the largest non-metallic mineral producer in the world and one of the key consumers of four major non-metallic mineral products, including cement, refractories, plate glass and ceramics. The non-metallic mineral products industry’s rapid growth has brought about a large demand for energy. The present study provides an overview of China’s non-metallic mineral products industry in terms of production, energy consumption and carbon dioxide emissions. In this industry, the energy efficiency is relatively low and the level of carbon dioxide emission is much higher than developed countries’ average. This study interprets the effects of some newly issued policies and analyses the influential factors in achieving energy conservation and emission reduction goals. It also discusses the prospects for saving energy and emission reduction in the industry. Retrofitting facilities and using new production technologies is imperative. Additionally, implementing market-based policies, promoting industrial transformation and effective international cooperation would help decrease carbon dioxide emissions and energy consumption.

  2. Analysis of industry development of building materials and ore mining and dressing of non-metallic minerals%2011年建材及非金属矿采选业行业发展分析

    Institute of Scientific and Technical Information of China (English)

    何军生

    2012-01-01

    In 2011, the growth of building materials production remained stable, industrial structure contiuned to optimise, economic porfits improved. In this paper, the author firstly discusses economic operation of building materials and ore mining and dressing of non-metallic minerals in 2011, to adjust the industrial structure of building materials and ore mining and dressing of non-metallic minerals to impove the quality of the economic operation, predicts the development trend of industry of building materials and ore mining and dressing of non-metallic minerals in 2012. At last, the author puts forward to policy suggestions which accelerate industry deleopment of the building materials and ore mining and dressing of non-metallic minerals%2011年建材工业生产增长速度保持平稳,产业结构继续优化,经济效益提高.本文首先讨论了2011年建材工业经济及非金属矿采选行业经济运行情况,做到调整建材及非金属矿选行业产业结构,提高经济运行质量,预测了2012年建材及非金属矿选行业未来发展趋势,最后提出促进建材及非金属矿选行业发展的政策建议.

  3. The mineral base and productive capacities of metals and non-metals of Kosovo

    Energy Technology Data Exchange (ETDEWEB)

    Rizaj, M.; Beqiri, E.; McBow, I.; O' Brien, E.Z.; Kongoli, F. [University of Prishtina, Prishtina (Kosovo)

    2008-08-15

    All historical periods of Kosovo - Ilirik, Roman, Medieval, Turkish, and former Yugoslavian - are linked with the intensive development of mining and metallurgy. This activity influenced and still is influencing the overall position of Kosovo as a country. For example, according to a 2006 World Bank report as well as other studies, Kosovo has potential lignite resources (geological reserves) of about 1.5 billion tonnes, which are ranked fifth in the world in importance. Other significant Kosovan mineral resources include lead, zinc, gold, silver, bauxite, and uranium, and rare metals accompanying those minerals, including indium, cadmium, thallium, gallium, and bismuth. These rare metals are of particular importance in developing advanced industrial technologies. Kosovo also has reserves of high-quality non-metals, including magnesite, quartz grit, bentonite, argil, talc, and asbestos. No database exists for these non-metal reserves, and further research and studies are needed.

  4. The mineral base and productive capacities of metals and non-metals of Kosovo

    Science.gov (United States)

    Rizaj, M.; Beqiri, E.; McBow, I.; O'Brien, E. Z.; Kongoli, F.

    2008-08-01

    All historical periods of Kosovo—Ilirik, Roman, Medieval, Turkish, and former Yugoslavian—are linked with the intensive development of mining and metallurgy. This activity influenced and still is influencing the overall position of Kosovo as a country. For example, according to a 2006 World Bank report as well as other studies, Kosovo has potential lignite resources (geological reserves) of about 1.5 billion tonnes, which are ranked fifth in the world in importance. Other significant Kosovan mineral resources include lead, zinc, gold, silver, bauxite, and uranium, and rare metals accompanying those minerals, including indium, cadmium, thallium, gallium, and bismuth. These rare metals are of particular importance in developing advanced industrial technologies. Kosovo also has reserves of high-quality non-metals, including magnesite, quartz grit, bentonite, argil, talc, and asbestos. No database exists for these non-metal reserves, and further research and studies are needed.

  5. 非金属矿物在医药行业的应用与前景%Medicinal Application and Prospect of Non-metallic Mineral

    Institute of Scientific and Technical Information of China (English)

    鲍康德; 周春晖

    2012-01-01

    Deep procession of non-metallic mineral and application on bio-/medicinal area is a new high-technical industry. This paper summarizes the appl ication history and status in quo of non-metallic minerals in pharmaceutical industry; identification, classification and development tendency of non-metallic minerals for pharmaceutical use. The focus is to introduce the development history of non-metallic minerals for pharmaceutical use, and explore the application prospect of non-metallic minerals in pharmaceutical industry, so as to provide theory basis for sufficiently exploring the potential of non-metallic minerals.%非金属矿物深加工并被用于生物医药领域系高新技术产业.本文综述了非金属矿物的医药应用历史、现状;药用非金属矿物的鉴别、分类和发展趋势.重点介绍了非金属矿物的药用开发历程,并展望了非金属矿物在医药行业的应用前景,以期为充分发掘非金属矿物的潜能提供理论指导.

  6. Miscellaneous Industrial Mineral Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes miscellaneous industrial minerals operations in the United States. The data represent commodities covered by the Minerals Information Team...

  7. The diesel exhaust in miners study: IV. Estimating historical exposures to diesel exhaust in underground non-metal mining facilities.

    NARCIS (Netherlands)

    Vermeulen, R.; Coble, J.B.; Lubin, J.H.; Portengen, L.; Blair, A.; Attfield, M.D.; Silverman, D.T.; Stewart, P.A.

    2010-01-01

    We developed quantitative estimates of historical exposures to respirable elemental carbon (REC) for an epidemiologic study of mortality, including lung cancer, among diesel-exposed miners at eight non-metal mining facilities [the Diesel Exhaust in Miners Study (DEMS)]. Because there were no histori

  8. Aggregate and Mineral Resources - Industrial Mineral Mining Operations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — An Industrial Mineral Mining Operation is a DEP primary facility type related to the Industrial Mineral Mining Program. The sub-facility types are listed below:Deep...

  9. Aggregate and Mineral Resources - Industrial Mineral Mining Operations

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — An Industrial Mineral Mining Operation is a DEP primary facility type related to the Industrial Mineral Mining Program. The sub-facility types are listed below:Deep...

  10. Refractory, Abrasive and Other Industrial Mineral Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes refractory, abrasive, and other industrial minerals operations in the United States. The data represent commodities covered by the Minerals...

  11. Tangible Asset Management In Real Sector Companies: A Parallel Between Industry Of Crude Oil Refining And Industry Of Refining Of Non Metallic Mineral In Colombia Gerenciamiento de activos tangibles en empresas del sector real: un paralelo entre industria de refinación de crudos e industria de refinación de minerales no metálicos en Colombia

    Directory of Open Access Journals (Sweden)

    John Jairo Forero Romero

    2012-08-01

    Full Text Available Enterprises around of the world are striving to understand and ensure that risks in utilities they govern are effectively managed while they must satisfy all expectations of their stakeholders. For this purpose there are now organisms and standardized management systems to manage financial risks, environmental hazards, industrial safety and occupational health risk. However, operational and reliability risks in the business lack an equivalent oversight body or an organizing framework through which enterprises can asses such risks , or define standards to which can be held accountable.The emergent understanding of asset management across all industry sectors has triggered a subsequent need for a standardized approach. This article identifies the key elements of asset management process and explains the benefits of the application of its elements with reference to two specific cases: the Barrancabermeja Refinery of Ecopetrol S.A. and  Sumicol S.A.Las empresas de todo el mundo se esfuerzan por comprender y asegurar que los riesgosen sus activos tangibles estén regidos bajo una administración eficaz y, a su vez, debenencargarse de cumplir con todas las expectativas de sus grupos de interés. Con estepropósito hoy en día existen organismos y sistemas de gestión estandarizados paraadministrar los riesgos financieros, ambientales, de seguridad de industrial y saludocupacional. Sin embargo, los riesgos operativos y de confiabilidad en el negocio hasta elmomento carecen de un órgano de supervisión equivalente, o un marco de organización através del cual las empresas pueden evaluar estos riesgos o definir las normas a las quepueden ser considerados responsables.El entendimiento emergente de la gestión efectiva de activos en todos los sectoresde la industria ha provocado una necesidad de un enfoque estandarizado. Este artículoidentifica los elementos clave del proceso de gestión de activos y explica los beneficiosde la aplicación de

  12. The Diesel Exhaust in Miners Study: IV. Estimating historical exposures to diesel exhaust in underground non-metal mining facilities.

    Science.gov (United States)

    Vermeulen, Roel; Coble, Joseph B; Lubin, Jay H; Portengen, Lützen; Blair, Aaron; Attfield, Michael D; Silverman, Debra T; Stewart, Patricia A

    2010-10-01

    We developed quantitative estimates of historical exposures to respirable elemental carbon (REC) for an epidemiologic study of mortality, including lung cancer, among diesel-exposed miners at eight non-metal mining facilities [the Diesel Exhaust in Miners Study (DEMS)]. Because there were no historical measurements of diesel exhaust (DE), historical REC (a component of DE) levels were estimated based on REC data from monitoring surveys conducted in 1998-2001 as part of the DEMS investigation. These values were adjusted for underground workers by carbon monoxide (CO) concentration trends in the mines derived from models of historical CO (another DE component) measurements and DE determinants such as engine horsepower (HP; 1 HP = 0.746 kW) and mine ventilation. CO was chosen to estimate historical changes because it was the most frequently measured DE component in our study facilities and it was found to correlate with REC exposure. Databases were constructed by facility and year with air sampling data and with information on the total rate of airflow exhausted from the underground operations in cubic feet per minute (CFM) (1 CFM = 0.0283 m³ min⁻¹), HP of the diesel equipment in use (ADJ HP), and other possible determinants. The ADJ HP purchased after 1990 (ADJ HP₁₉₉₀(+)) was also included to account for lower emissions from newer, cleaner engines. Facility-specific CO levels, relative to those in the DEMS survey year for each year back to the start of dieselization (1947-1967 depending on facility), were predicted based on models of observed CO concentrations and log-transformed (Ln) ADJ HP/CFM and Ln(ADJ HP₁₉₉₀(+)). The resulting temporal trends in relative CO levels were then multiplied by facility/department/job-specific REC estimates derived from the DEMS surveys personal measurements to obtain historical facility/department/job/year-specific REC exposure estimates. The facility-specific temporal trends of CO levels (and thus the REC

  13. Miscellaneous Industrial Minerals Operations - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer includes miscellaneous industrial minerals operations in the United States. The data represent commodities covered by the Minerals Information Team...

  14. Aggregate and Mineral Resources - INDUSTRIAL_MINERALS_POINTS_IN: Industrial Mineral Data in Indiana (Indiana Geological Survey, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — INDUSTRIAL_MINERALS_POINTS_IN is a shapefile that shows the distribution of stratigraphic data for various industrial minerals in Indiana. These data were derived...

  15. Industrial mineral powder production in China

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The recent annual output of major industrial mineral powders in the mainland of China has been more than 100 million t, accompanied by active development of such supporting technology as comminution, classification, separation/purification, and surface modification. In particular, the present paper reviews technologies for preparing ultra-fine particles involving dry and wet processing, modification and composition, calcination of kaolin clay, and processing of spherical/acerous industrial minerals.

  16. FORMULATION OF EXPANSIVE MORTAR TO TILL THE STONES USING NON-METALLIC MINERALS OF NORTHEAST OF COUNTRY

    Directory of Open Access Journals (Sweden)

    Danielly Vieira de Lucena

    2015-03-01

    Full Text Available One of the most significant methods of advanced technology for mining, the rock massif is employing expansive mortar for cutting of Rock. Furthermore, the entire expansive mortar commercialized in the Brazilian domestic market are imported, as well as those in industrialized country. Both have components from the external market. The aim of this work is to develop expansive mortar with raw materials that have regional and pressure sufficient to remove the rocks of granite and marble type expansion. For this, expansive grout formulations using calcium oxide, calcium carbonate, carboxymethylcellulose are used - CMC (Portland cement, and from the chemical analysis by means of thermal analysis, X-ray diffraction and laser granulometry compared the results with a commercial mortar. The results indicated that the formulations showed characteristics similar to the commercial mortar.

  17. New Mexico Minerals Industry Locator System (MILS)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This contains all Mineral Industry Systems in the state of New Mexico. It is in a vector digital structure digitized from a 1:500,000 scale map of the state of New...

  18. Determinants of Electricity Demand in Nonmetallic Mineral Products Industry: Evidence from a Comparative Study of Japan and China

    Directory of Open Access Journals (Sweden)

    Gang Du

    2015-06-01

    Full Text Available Electricity intensity is an important indicator for measuring production efficiency. A comparative study could offer a new perspective on investigating determinants of electricity demand. The Japanese non-metallic mineral products industry is chosen as the object for comparison considering its representative position in production efficiency. By adopting the cointegration model, this paper examines influencing factors of electricity demand in Japanese and Chinese non-metallic mineral products industries under the same framework. Results indicate that although economic growth and industrial development stages are different between the two countries, major factors that affect the sectoral energy consumption are the same. Specifically, economic growth and industrial activity contribute to the growth of sectoral electricity consumption, while R&D intensity, per capita productivity and electricity price are contributors to the decline of sectoral electricity consumption. Finally, in order to further investigate the development trend of sectoral electricity demand, future electricity consumption and conservation potential are predicted under different scenarios. Electricity demand of the Chinese non-metallic mineral products industry is predicted to be 680.53 TWh (terawatt-hours in 2020 and the sectoral electricity conservation potentials are estimated to be 118.26 TWh and 216.25 TWh under the moderate and advanced electricity-saving scenarios, respectively.

  19. Development of industrial minerals in Colorado

    Science.gov (United States)

    Arbogast, Belinda F.; Knepper, Daniel H.; Langer, William H.; Cappa, James A.; Keller, John W.; Widmann, Beth L.; Ellefsen, Karl J.; Klein, Terry L.; Lucius, Jeffrey E.; Dersch, John S.

    2011-01-01

    Technology and engineering have helped make mining safer and cleaner for both humans and the environment. Inevitably, mineral development entails costs as well as benefits. Developing a mine is an environmental, engineering, and planning challenge that must conform to many Federal, State, and local regulations. Community collaboration, creative design, and best management practices of sustainability and biodiversity can be positive indicators for the mining industry. A better understanding of aesthetics, culture, economics, geology, climate, vegetation and wildlife, topography, historical significance, and regional land planning is important in resolving land-use issues and managing mineral resources wisely. Ultimately, the consuming public makes choices about product use (including water, food, highways, housing, and thousands of other items) that influence operations of the mineral industry. Land planners, resource managers, earth scientists, designers, and public groups have a responsibility to consider sound scientific information, society's needs, and community appeals in making smart decisions concerning resource use and how complex landscapes should change. An effort to provide comprehensive geosciences data for land management agencies in central Colorado was undertaken in 2003 by scientists of the U.S. Geological Survey and the Colorado Geological Survey. This effort, the Central Colorado Assessment Project, addressed a variety of land-use issues: an understanding of the availability of industrial and metallic rocks and minerals, the geochemical and environmental effects of historic mining activity on surface water and groundwater, and the geologic controls on the availability and quality of groundwater. The USDA Forest Service and other land management agencies have the opportunity to contribute to the sustainable management of natural aggregate and other mineral resources through the identification and selective development of mineral resources and the

  20. Minerals yearbook: Mineral industries of Asia and the Pacific. Volume 3. 1991 international review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    This edition of the Minerals Yearbook records the performance of the worldwide minerals industry during 1991 and provides background information to assist in interpreting that performance. Content of the individual Yearbook volumes follows: Volume I, Metals and Minerals, contains chapters on virtually all metallic and industrial mineral commodities important to the U.S. economy. Volume II, Area Reports: Domestic, contains chapters on the minerals industry of each of the 50 States and Puerto Rico, Northern Marianas, Island Possessions, and Trust Territory. Volume III, Area Reports: International, contains the latest available mineral data on more than 160 foreign countries and discuss the importance of minerals to the economies of these nations.

  1. An industrial mineral for the next millenium

    Directory of Open Access Journals (Sweden)

    Čorej Peter

    2001-12-01

    Full Text Available Talc is a mineral of high quality and from chemical point of view it is Mg3Si04010 /OH/2. It usually contains different additional minerals that signigicantly affect its color and most of all its quality. The quality is decreased by the existence of Fe3+, pyrite and oxide Mn. Talc is used mainly in the paper manufacturing, cosmetic industry, glass industry, as a chemical catalyzator, ingredient in making explosives, in pharmaceutics and car industry.Some of the biggest producers of talc are: China - 2.35 mills tons/year, the USA - 1.0 mills tons/year, India - 500.00 kt/year, Finland - 425 kt/year, and Brazil with 325 kt/year. The most important deposits are located in: Finland (Sotkano deposit, in the USA (deposits in the state of New York, Virginia and Vermont in Canada (province of Ontariou, Australia (Three Springs deposit etc.Among one of the first companies being interested in this deposit of talc (along with the Rima Muran Ltd were companies from Germany – Gebruder Dorfner and Thyssen Schachtbau. The result of the detailed research of the deposit performed in 1994 was a Feasibility Study. This deposit with 28 milions tons of talc belongs to the group of most important deposits in the world.Initial acivities began in September 2000 and they are still in progress.The first ton will be placed into themarket during this year. The deposit lies about 350 meters beneath the earth surface. The whole body of talc is 2700 meters from West-East and 820 meters from North-South. The average depth of the deposit is 200 meters.

  2. Refractory, Abrasive, and Other Industrial Minerals Operations - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer includes refractory, abrasive, and other industrial minerals operations in the United States. The data represent commodities covered by the Minerals...

  3. Surface characterization of bacterial cells relevant to the mineral industry

    NARCIS (Netherlands)

    Sharma, PK; Rao, KH

    Bacteria belonging to the Acidithiobacilli group are widely used in the mineral processing industry in bioleaching and biobeneficiation operations. Paenibacillus polymyxa has also found application in biobeneficiation studies. Microbial adhesion to mineral surface is an essential step,for both

  4. Nationwide survey on the natural radionuclides in industrial raw minerals in South Korea

    Energy Technology Data Exchange (ETDEWEB)

    Chang, B.U. [Korea Institute of Nuclear Safety, Guseong-dong 19, Yuseong-gu, 305-338 Daejeon (Korea, Republic of)], E-mail: hafadai@kins.re.kr; Koh, S.M. [Korea Institute of Geoscience and Mineral Resources, Gajeong-dong 30, Yuseong-gu, 305-350 Daejeon (Korea, Republic of); Kim, Y.J.; Seo, J.S. [Korea Institute of Nuclear Safety, Guseong-dong 19, Yuseong-gu, 305-338 Daejeon (Korea, Republic of); Yoon, Y.Y. [Korea Institute of Geoscience and Mineral Resources, Gajeong-dong 30, Yuseong-gu, 305-350 Daejeon (Korea, Republic of); Row, J.W.; Lee, D.M. [Korea Institute of Nuclear Safety, Guseong-dong 19, Yuseong-gu, 305-338 Daejeon (Korea, Republic of)

    2008-03-15

    A Nationwide survey on the natural radioactivity in industrial raw mineral commodities (17 kinds of domestic and 18 kinds of imported) that are representative minerals used in production and consumption in South Korea was conducted. The target industrial minerals can be categorized into two groups. The first group covers non-metallic and metallic raw minerals with low levels of radioactivity such as clay, silica sand, carbonates, bituminous and anthracite coal, iron ores, ilmenite, rutile, and phosphate ore. The other group comprises minerals with high levels of radioactivity including zircon and monazite. One hundred and sixty-four domestic and imported samples were analysed by {gamma}-ray spectroscopy using an HPGe detector. The {sup 40}K content ranges from <0.00131 to 2.69 Bq g{sup -1}, and {sup 226}Ra and {sup 232}Th range over <0.0006 to 0.630 and <0.0008 to 0.474 Bq g{sup -1}, respectively. There was no anthropogenic radioactive signal in any of the samples.

  5. Minerals yearbook: Mineral industries of latin America and Canada. Volume 3. 1993 international review. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    This edition of the Mineral Yearbook records the performance of the worldwide minerals industry during 1993 and provides background information to assist in interpreting that performance. Volume II, Area Reports: Domestic, contains chapters on the minerals industry of each of the 50 States and Puerto Rico, Northern Marianas, Island Possessions, and Trust Territory. This volume also has a chapter on survey methods used in data collection, including a statistical summary of domestic nonfuel minerals.

  6. Proximate and mineral composition of industrialized biscuits

    Directory of Open Access Journals (Sweden)

    Maria Eliza Assis dos Passos

    2013-06-01

    Full Text Available The aim of this study was to analyze the proximate and mineral composition of 21 types of biscuits. All biscuits showed high fat contents, significantly different (P < 0.05 from those described on the labels, except for three brands. Insoluble fiber fractions were predominant in the analyzed samples. Among the 21 biscuits analyzed, 16 showed food label values 20% higher than those allowed by law, according to RDC 360, for fat, protein, total fiber, calcium, and sodium levels. This difference reached 273% for the sodium content. The calcium content was included only on the label of three samples analyzed, and the values described were significantly lower than those obtained analytically. Considering that biscuits are consumed by people of all age groups and of different socioeconomic levels, the results can contribute to the plans for health policies, such as surveillance of nutritional labeling, ensuring the reliability of the information provided by the food industry and enabling the identification of the relationship between dietary factors and the occurrence of non-transmissible chronic diseases.

  7. Effects of Chinese mineral strategies on the U.S. minerals industry

    Science.gov (United States)

    McCartan, L.; Menzie, W.D.; Morse, D.E.; Papp, J.F.; Plunkert, P.A.; Tse, P.-K.

    2006-01-01

    For more than two decades now, China has been undergoing rapid economic growth and industrialization. The industrialization and urbanization of the once rural, farming nation is leading to increased consumption of mineral commodities to build infrastructure and to make into consumer goods. This increased consumption has led to higher mineral prices, lower stocks and, in some cases, temporary shortages of minerals. Chinese mineral producers and manufacturers are responding by building capacity, restructuring and modernizing industrial sectors and establishing international network that compete with those of the United States and other nations.

  8. Theoretical aspects of competitiveness of the industry of mineral water

    Directory of Open Access Journals (Sweden)

    E.M. Azarian

    2014-03-01

    Full Text Available The aim of the article. The article presents theoretical aspects of the concept and content of economic competitiveness for its competitive positions. Authors found positive trends, essential trends of increasing the competitiveness of the food industry as a complex system. The article shows theoretical basis for the competitiveness of the industry of mineral water, clarifies the concepts of competitiveness. Authors suggest development of the main directions of improving the competitiveness of the food complex sector. The results of the analysis. Authors generalized theoretical experience of the concept and scope of the use of the methodology of competitiveness; analysis of the competitiveness of the industry of mineral water, revealed positive trends; developed the main directions of improving the competitiveness of the sector in food complex. Analysis of the mineral waters of Ukraine reveals the following competitive advantages: the ability to produce high quality products with an unique competitive advantage. Creating favorable conditions relevant resources and innovation of enterprises in order to increase their profitability, improve the culture of consumption of mineral water Ukrainian production, the elimination of the innovative and trend- to-market at the optimum time dictated by the marketing activity and consumer demand. Interaction with competitive firms, leaders of the study and implementation of international experience in the production and marketing strategy and sales, cooperation within the industry and with other industries in the country and with similar industries abroad, presence of unique recipes, advanced manufacturing, processing its own base; infrastructure. Conclusions and directions of further researchers. There is an intensive foreign investment in the development of the industry of mineral water. Formation of the state of quality and safety, monitoring compliance with in terms of quality and security of mineral

  9. Surface characterization of bacterial cells relevant to the mineral industry

    NARCIS (Netherlands)

    Sharma, PK; Rao, KH

    2005-01-01

    Bacteria belonging to the Acidithiobacilli group are widely used in the mineral processing industry in bioleaching and biobeneficiation operations. Paenibacillus polymyxa has also found application in biobeneficiation studies. Microbial adhesion to mineral surface is an essential step,for both biobe

  10. Perspective sources of industrial minerals for building industry in Novohrad (Southern Slovakia

    Directory of Open Access Journals (Sweden)

    Beláček Boris

    1999-03-01

    Full Text Available Novohrad a region of Southern Slovakia has wealthy industrial history, which was built mostly on local natural raw materials. Some deposits are exhausted, but other are ready to be exploited. Among such industrial minerals are raw materials for building industry. There are industrial minerals for fine and rough ceramics, stones for building and pavement, sand and gravel. The perspective areas are listed on Tab. 1 - 6 and are shown on Fig 1 - 3.

  11. MINING INDUSTRY IN CROATIA

    Directory of Open Access Journals (Sweden)

    Slavko Vujec

    1996-12-01

    Full Text Available The trends of World and European mine industry is presented with introductory short review. The mining industry is very important in economy of Croatia, because of cover most of needed petroleum and natural gas quantity, total construction raw materials and industrial non-metallic raw minerals. Detail quantitative presentation of mineral raw material production is compared with pre-war situation. The value of annual production is represented for each raw mineral (the paper is published in Croatian.

  12. Assessment of industrial minerals and rocks in the controlled area

    Energy Technology Data Exchange (ETDEWEB)

    Castor, S.B. [Nevada Bureau of Mines and Geology, Reno, NV (United States); Lock, D.E. [Mackay School of Mines, Reno, NV (United States)

    1996-08-01

    Yucca Mountain in Nye County, Nevada, is a potential site for a permanent repository for high-level nuclear waste in Miocene ash flow tuff. The Yucca Mountain controlled area occupies approximately 98 km{sup 2} that includes the potential repository site. The Yucca Mountain controlled area is located within the southwestern Nevada volcanic field, a large area of Miocene volcanism that includes at least four major calderas or cauldrons. It is sited on a remnant of a Neogene volcanic plateau that was centered around the Timber Mountain caldera complex. The Yucca Mountain region contains many occurrences of valuable or potentially valuable industrial minerals, including deposits with past or current production of construction aggregate, borate minerals, clay, building stone, fluorspar, silicate, and zeolites. The existence of these deposits in the region and the occurrence of certain mineral materials at Yucca Mountain, indicate that the controlled area may have potential for industrial mineral and rock deposits. Consideration of the industrial mineral potential within the Yucca Mountain controlled area is mainly based on petrographic and lithologic studies of samples from drill holes in Yucca Mountain. Clay minerals, zeolites, fluorite, and barite, as minerals that are produced economically in Nevada, have been identified in samples from drill holes in Yucca Mountain.

  13. From Projectile Points to Microprocessors - The Influence of Some Industrial Minerals

    Science.gov (United States)

    Driscoll, Rhonda

    2007-01-01

    In the language of economic geology, Earth materials are classified as metallic ores, fuel minerals, gemstones, and industrial minerals. Most people know that metallic ores yield shiny, conductive, ductile elements such as copper, iron, or gold. Most understand that energy-producing coals constitute a fuel mineral. Likewise, dazzling rubies and rare sapphires are universally recognized as gemstones. The fourth group, industrial minerals, is largely unknown to the general public, even though industrial minerals are as essential to daily life as metals and fuel minerals. This report examines the occurrence and practical uses of nine important industrial minerals - constituting just a few of the more than 50 industrial minerals that shape human culture.

  14. Community Road Safety Initiatives for the Minerals Industry

    Directory of Open Access Journals (Sweden)

    Tim Horberry

    2013-12-01

    Full Text Available Major companies in the minerals industry are increasingly recognizing that their operations have an impact in the wider community. Regarding transportation issues, this impact extends beyond purely the safety of company vehicle fleets to consideration of Community Road Safety (CRS concerns, which address the driving, walking, and riding practices of community members in a locale with increased heavy vehicle traffic. Our assessment here of national and international trends in approaches to road safety awareness and associated road safety strategies is meant to inform companies in the minerals industry of developments that can influence the design of their road safety initiatives. The review begins by considering the overall road safety context and the dominant “safe systems” framework employed internationally. Thereafter, it considers what is typically included in CRS initiatives for the minerals industry. Three case studies are then presented to highlight approaches that feature exemplary collaboration, design, implementation, or impact. Thereafter, we analyze lessons learnt by key researchers and practitioners in the CRS field. Finally, we conclude that best CRS practices for the minerals industry rely on eleven factors, including for example collaboration with local entities and stepwise implementation.

  15. Secondary Industrial Minerals from Coal Fly Ash and Aluminium Anodising Waste Solutions

    NARCIS (Netherlands)

    Nugteren, H.W.

    2010-01-01

    Minerals that are extracted from the earth’s crust to be directly used for their properties are called industrial minerals. This research shows that such minerals can also be produced from industrial residues, hence the name secondary industrial minerals. In this thesis coal fly ash is chosen as on

  16. Secondary Industrial Minerals from Coal Fly Ash and Aluminium Anodising Waste Solutions

    NARCIS (Netherlands)

    Nugteren, H.W.

    2010-01-01

    Minerals that are extracted from the earth’s crust to be directly used for their properties are called industrial minerals. This research shows that such minerals can also be produced from industrial residues, hence the name secondary industrial minerals. In this thesis coal fly ash is chosen as

  17. Separation of metals from incineration wastes using mineral industry processes

    Energy Technology Data Exchange (ETDEWEB)

    Scheizer, G. [Universite de Technologie, Aix-la-Chapelle (Germany)

    1996-12-01

    The incineration of municipal wastes in Federal Republic of Germany produced about 2.7 to 2.8 millions of tons of solid wastes in 1993 which still contain huge amounts of mineral and organic pollutants. Ashes represent the largest part of wastes with about 2.4 millions of tons. Vitrification is an innovative treatment technique which allows a 90% reduction of the waste volume, the complete removal of the organic matter content, and the storage of these waste in an environmentally neutral form. However, metals must be extracted from the ashes prior to the vitrification process. Most metals fall into the 2.4-2.7 g/cm{sup 3} and > 3 g/cm{sup 3} density ranges. The lighter fraction corresponds to aluminium particles and alloys, while the high density fraction is enriched in copper, copper alloys and more particularly in brass. The treatment process, after drying, consist in the use of high intensity magnetic separation devices (permanent neodymium-bore-iron magnets) for the removal of ferrous particles, and in the use of Foucault currents separation devices for non-magnetic metals. At the pilot-scale, the distribution of the processed wastes corresponds to: 62.6 % of non-metallized ashes, 35.5 % of magnetic products, and 1.9% of non-magnetic products. The possible recycling of the metal fraction must be demonstrated by further studies. (J.S.). Abstract only.

  18. Natural radionuclide concentrations in processed materials from Thai mineral industries.

    Science.gov (United States)

    Chanyotha, S; Kranrod, C; Chankow, N; Kritsananuwat, R; Sriploy, P; Pangza, K

    2012-11-01

    The naturally occurring radioactive materials (NORMs) distributed in products, by-products and waste produced from Thai mineral industries were investigated. Samples were analysed for radioactivity concentrations of two principal NORM isotopes: (226)Ra and (228)Ra. The enrichment of NORM was found to occur during the treatment process of some minerals. The highest activity of (226)Ra (7 × 10(7) Bq kg(-1)) was in the scale from tantalum processing. The radium concentration in the discarded by-product material from metal ore dressing was also enriched by 3-10 times. Phosphogypsum, a waste produced from the production of phosphate fertilisers, contained 700 times the level of (226)Ra concentration found in phosphate ore. Hence, these residues were also sources of exposure to workers and the public, which needed to be controlled.

  19. Control of phosphorus in wasterwater treatment using industrial mineral

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Soon-Ki; Kim, Young-Hun; Shin, Dong-Cheol; Kim, Kyoung-Won; Shin, Shun-Myung; Kang, Heon-Chan [Dong-A University, Pusan(Korea)

    2000-02-28

    In case of removing COD in wastewater which has different concentration of phosphate, this study aims to investigate correlations among media applied systems such as activated carbon, ceramic apatite and ceramic calcite. In the case of wastewater (P : 0), COD was lower than 10 ppm at ceramic apatite and in the case of wastewater (N/P : 5/1), COD was respectively 50 ppm and 10 ppm at ceramic calcite and ceramic apatite. It could be found out that ceramic calcite and ceramic apatite had a higher removing rate of COD as 50 ppm and 10 ppm effluent than that of other ceramic industrial minerals. In the case of wastewater (N/P : 1.5/1), ceramic industrial minerals had higher removing efficiency of COD than that of activated sludge system. Ceramic calcite had a low T-P value 2 ppm, regardless of the quantity of phosphorus. This is owing to CaCO{sub 3} precipitation which follows Ca{sup 2+}-CO{sub 2} reaction where Ca{sup 2+} ion comes from CaO and CO{sub 2} gas is generated from microorganism-decomposed organic matter. It also could be known by XRD analysis that P ion in wastewater bonds to precipitate as calcium phosphate. (author). 15 refs., 2 tabs., 9 figs.

  20. The geologic relationships of industrial mineral deposits and asbestos in the western united states

    Science.gov (United States)

    VanGosen, B.S.

    2009-01-01

    In recent years, U.S. regulatory agencies have placed emphasis on identifying and regulating asbestos dust exposures in the mining environment, with a particular focus upon industrial mineral deposits in which asbestos occurs as an accessory mineral. Because asbestos minerals form in specific geologic environments, only certain predictable types of industrial mineral deposits can potentially host asbestos mineralization. By applying a basic knowledge of asbestos geology, the costly and time consuming efforts of asbestos monitoring and analyses can be directed towards those mineral deposit types most likely to contain asbestos mineralogy, while saving efforts on the mineral deposits that are unlikely to contain asbestos. While the vast majority of industrial mineral deposits in the Western United States are asbestos-free, there are several types that can, in some instances, host asbestos mineralization, or be closely associated with it. These industrial mineral deposits include a few types of aggregate, dimension, and decorative stone, and some deposits of chromite-nickel, magnesite, nepheline syenite, olivine, rare earth elements, talc, vermiculite, and wollastonite.

  1. Aggregate and Mineral Resources, (Quarry Name) GPS locations of Non-Metallic Mining Sites and their stockpiles, Published in 2002, 1:24000 (1in=2000ft) scale, Lafayette County Land Records.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Aggregate and Mineral Resources dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Field Survey/GPS information as of 2002. It...

  2. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Yambo Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  3. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Newberry Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  4. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Mt. Shasta Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  5. 2008 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Camp Creek

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic lidar data for...

  6. 2009 Oregon Department of Geology and Mineral Industries (DOGAMI) Oregon Lidar: North Coast

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  7. 2008 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Ontario

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic lidar data for...

  8. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Mt. Shasta Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  9. 2009 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Medford

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic lidar data for...

  10. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Eagle Point Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  11. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Yambo Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  12. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Crater Lake Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  13. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Crater Lake Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  14. 2009 Oregon Department of Geology and Mineral Industries (DOGAMI) Oregon Lidar: North Coast

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  15. 2008 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Camp Creek

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic lidar data for...

  16. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Umatilla Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  17. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Newberry Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  18. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Burns Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  19. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Klamath Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  20. 2008 - 2009 Oregon Department of Geology and Mineral Industries (DOGAMI) South Coast LiDAR Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  1. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Burns Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  2. 2008 - 2009 Oregon Department of Geology and Mineral Industries (DOGAMI) South Coast LiDAR Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  3. 2008 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Lake Billy Chinook, Oregon

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  4. 2009 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Southwest Washington Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  5. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Eagle Point Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  6. 2009 Oregon Department of Geology and Mineral Industries (DOGAMI) Oregon Lidar: Willamette Valley

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  7. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Ochoco Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  8. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Pine Creek Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  9. CMMI congress. International codes, technology and sustainability for the minerals industry. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    Papers cover three main themes: international reporting standards; new technology and competition (seeing through rock, controlling fragmentation, asset utilisation); and sustainability for the minerals industry. Four papers have been abstracted separately for the Coal Abstracts database.

  10. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Pine Creek Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  11. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Ochoco Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  12. The Utilization of Peat, Lignite and Industrial Wastes in the Production of Mineral-Organic Fertilizers

    OpenAIRE

    Krystyna Hoffmann; Józef Hoffmann

    2007-01-01

    The results of chemical analyses of the composition of peat, lignite, turkey droppings and the potato industry effluent are presented. The results indicate that the substances can be used in mineral-organic fertilizer recipes. Although lignite and peat do not contain assimilable nutrients, from the ecology and pedology point of view they are valuable components of mineral-organic fertilizers. In order to determine the optimum turkey droppings and potato industry effluent dose in fertilizer bi...

  13. Relationship between Corporate Social Responsibility and Financial Performance in the Mineral Industry: Evidence from Chinese Mineral Firms

    Directory of Open Access Journals (Sweden)

    Xiping Pan

    2014-06-01

    Full Text Available This paper examines the relationship between Corporate Social Responsibility (CSR and Corporate Financial Performance (CFP using panel data for 228 Chinese mineral listed firms from 2010 to 2013 with Pooled Least Squares regression analysis. Our study considers five different sublevel CSR issues—shareholder responsibility, employee responsibility, environmental responsibility, public responsibility, and supplier, customer and consumer responsibility—in capturing the effects of CSR elements on CFP. The estimation results show the different effects of each sublevel CSR issue on CFP. Overall, shareholder, employee responsibility, environmental responsibility, supplier, customer and consumer responsibility have significant relationships with CFP, which are the stakeholders who have the closest linkage with firm operations. Meanwhile, public responsibility outside the firm does not show significant interaction with CFP, which is why many mineral firms ignore the public interest and this leads to conflicts. Shareholder responsibility has the most significant positive effect on CFP. Supplier, customer and consumer responsibility and environmental responsibility usually have negative effects on CFP as costs increase. Moreover, all 228 listed mineral firms that were selected in this paper have been classified into five sub-sectors: the extractive industry, metal fabrication industry, oil and gas industry, gas and water-related industry, and oil-producing equipment industry, based on the Industry Classification Benchmark (ICB. Our study shows that the differences in the relationship between CSR and CFP for five sublevel industries are due to industry characteristics. If the government wants to solve these conflicts and positively encourage firms to adopt CSR, it is necessary to create a mining development environment whereby firm profits are closely tied to CSR.

  14. Bacterial assimilation reduction of iron in the treatment of non-metallics

    Directory of Open Access Journals (Sweden)

    Peter Malachovský

    2005-11-01

    Full Text Available Natural non-metallics, including granitoide and quartz sands, often contain iron which decreases the whiteness of these raw materials. Insoluble Fe3+ in these samples could be reduced to soluble Fe2+ by bacteria of Bacillus spp. and Saccharomyces spp. The leaching effect, observed by the measurement of Fe2+concentration in a solution, showed higher activities of a bacterial kind isolated from the Bajkal lake and also by using of yeast Saccharomyces sp. during bioleaching of quartz sands. However, allkinds of Bacillus spp. isolated from the Slovak deposit and from Bajkal lake were very active in the iron reduction during bioleaching of the feldspar raw material. This metal was efficiently removed from quartz sands as documented by the Fe2O3 decrease (from 0,317 % to 0,126 % and from feldpars raw materials by the Fe2O3 decrease (from 0,288 % to 0,115 % after bioleaching. The whiteness of these non-metallics was increased during a visual comparison of samples before and after bioleaching but samples contain selected magnetic particles. A removal of iron as well as a release of iron minerals from silicate matrix should increase the effect of the magnetic separation and should give a product which is suitable for industrial applications.

  15. A Crosswalk of Mineral Commodity End Uses and North American Industry Classification System (NAICS) codes

    Science.gov (United States)

    Barry, James J.; Matos, Grecia R.; Menzie, W. David

    2015-09-14

    This crosswalk is based on the premise that there is a connection between the way mineral commodities are used and how this use is reflected in the economy. Raw mineral commodities are the basic materials from which goods, finished products, or intermediate materials are manufactured or made. Mineral commodities are vital to the development of the U.S. economy and they impact nearly every industrial segment of the economy, representing 12.2 percent of the U.S. gross domestic product (GDP) in 2010 (U.S. Bureau of Economic Analysis, 2014). In an effort to better understand the distribution of mineral commodities in the economy, the U.S. Geological Survey (USGS) attempts to link the end uses of mineral commodities to the corresponding North American Industry Classification System (NAICS) codes.

  16. Differences in morphological properties between the olivine group minerals formed in natural and industrial processes

    Directory of Open Access Journals (Sweden)

    Dević S.

    2007-01-01

    Full Text Available Olivines are a large isomorphic series of minerals, belonging to silicates group. Regardless of their chemical composition, any of these minerals can be formed both in natural and industrial processes. The aim of this work is to describe these minerals and differences of morphological properties between the olivines formed in nature, and those formed as byproducts of some industrial processes , as Process Metalurgy-Ironmaking. The olivines whose formation is tied to rock masses (natural process and the olivines genetically tied to industrial processes of black metallurgy slags (process metallurgy-Ironmaking are shown in this paper. The morphological properties of these minerals and their differences have been analyzed by optical microscopy in refracted and in reflected light. .

  17. Safety in the mineral oil industry; Sicherheit in Mineraloelbetrieben

    Energy Technology Data Exchange (ETDEWEB)

    Altmann, B.-R. [Deutsche Wissenschaftliche Gesellschaft fuer Erdoel, Erdgas und Kohle e.V., Hamburg (Germany); Jentz, A. [TOTAL Raffinerie Mitteldeutschland GmbH, Spergau (Germany)

    2005-05-01

    For many years now, there have been less accidents in the petroleum industry than in other industries. This is due not least to the fact that safety has become a top level concern. For example, up to 20 percent of the salaries of top managers are linked to the annual accident statistics. Motivation for accident prevention must be made top-down. Staff members must be made aware that business success and accident prevention have equal priority, that accidents can indeed be prevented, that there is no good work unless it is safe, that constant safety training is required, that each staff member is responsible for safety to an equal extent, and that safety awareness must constantly be activated and enhanced. (orig.)

  18. INTRODUCTION Talc is a universal industrial mineral commonly ...

    African Journals Online (AJOL)

    54.51 56.31 55.63 56.59 56.39 56.31 55.99 56.38 55.75 56.42 56.03. Al2O3. 2.20. 2.22. 2.23 ..... metals like Co and Ni does not meet the industrial specification for .... Finite Element Modeling of Deformation in a Composite Bar. Fadodun, O. O. ...

  19. Size of Non-Metallic Inclusions in High-Grade Medium Carbon Steel

    OpenAIRE

    Lipiński T.; Wach A.

    2014-01-01

    Non-metallic inclusions found in steel can affect its performance characteristics. Their impact depends not only on their quality, but also, among others, on their size and distribution in the steel volume. The literature mainly describes the results of tests on hard steels, particularly bearing steels. The amount of non-metallic inclusions found in steel with a medium carbon content melted under industrial conditions is rarely presented in the literature. The tested steel was melted in an el...

  20. Dioxins and furans releases in Iranian mineral industries.

    Science.gov (United States)

    Rezaei, E; Farahani, A; Buekens, A; Chen, T; Lu, S Y; Habibinejad, M; Damercheli, F; Andalib Moghadam, S H; Gandomkar, M; Bahmani, A

    2013-05-01

    In this project, emissions of Poly-Chlorinated Dibenzo-p-Dioxins and Dibenzo-Furans (PCDD/Fs) were investigated and estimated for selected Iranian mining and ore processing industries, such as integrated iron & steel plant, primary production of aluminium and copper metal, and the production of cement. As a first step of this study the annual emission of PCDD/Fs was estimated at 120gTEQannum(-1) on the base of the UNEP standardised Toolkit for identification and quantification of dioxin and furan releases. Steel and cement were identified as major emission sources and earmarked for further scrutiny. For that reason, filter dust arising in these plants was sampled and analysed, as well as all raw materials employed. After extraction and clean-up according to standard methods, the resulting liquid samples were analysed and quantified by HRGC-HRMS. Complementary analyses using methods such as XRF, TGA/DTA were performed and the emission results statistically evaluated, in order to put PCDD/F emissions in perspective. It is concluded that the dioxins load of cement dust is unusually low, following the low carbon in raw materials, the use of natural gas as a fuel and the absence of waste incineration. Also the production of iron by direct reduction of ore is a low dioxins process; dioxin loads in dust are as usual - correlated with the presence of catalytic metals. Loss on ignition and chlorine are anti-correlated with the main earth elements and with sulphur oxides.

  1. The Utilization of Peat, Lignite and Industrial Wastes in the Production of Mineral-Organic Fertilizers

    Directory of Open Access Journals (Sweden)

    Krystyna Hoffmann

    2007-01-01

    Full Text Available The results of chemical analyses of the composition of peat, lignite, turkey droppings and the potato industry effluent are presented. The results indicate that the substances can be used in mineral-organic fertilizer recipes. Although lignite and peat do not contain assimilable nutrients, from the ecology and pedology point of view they are valuable components of mineral-organic fertilizers. In order to determine the optimum turkey droppings and potato industry effluent dose in fertilizer biological studies using the germination tests were carried out. The demand for nutrients differs between plants. The mineral-organic fertilizer recipes were developed for sugar beet which is a highly demanding plant taking up large quantities of nutrients.

  2. Testing theOdour Quality of Non-Metallic Materials

    Directory of Open Access Journals (Sweden)

    AVIJIT SINGH GANGWAR

    2014-10-01

    Full Text Available This report has been compiled on the completion of 3 week summer training at ICAT. It discusses about a very necessary and least popular part of the Automotive Industry i.e. Testing and Certification. It discusses about one of the government notified Testing body ICAT which is one of just 6 such organisations in India.This report deals with the odour quality testing of non-metallic materials that are used for automobile compartment and parts associated with the compartment.

  3. Recent developments and perspectives on the treatment of industrial wastes by mineral carbonation — a review

    Science.gov (United States)

    Bodor, Marius; Santos, Rafael; Gerven, Tom; Vlad, Maria

    2013-12-01

    Besides producing a substantial portion of anthropogenic CO2 emissions, the industrial sector also generates significant quantities of solid residues. Mineral carbonation of alkaline wastes enables the combination of these two by-products, increasing the sustainability of industrial activities. On top of sequestering CO2 in geochemically stable form, mineral carbonation of waste materials also brings benefits such as stabilization of leaching, basicity and structural integrity, enabling further valorization of the residues, either via reduced waste treatment or landfilling costs, or via the production of marketable products. This paper reviews the current state-of-the-art of this technology and the latest developments in this field. Focus is given to the beneficial effects of mineral carbonation when applied to metallurgical slags, incineration ashes, mining tailings, asbestos containing materials, red mud, and oil shale processing residues. Efforts to intensify the carbonation reaction rate and improve the mineral conversion via process intensification routes, such as the application of ultrasound, hot-stage processing and integrated reactor technologies, are described. Valorization opportunities closest to making the transition from laboratory research to commercial reality, particularly in the form of shaped construction materials and precipitated calcium carbonate, are highlighted. Lastly, the context of mineral carbonation among the range of CCS options is discussed.

  4. Thermomagnetic identification of manganese and iron minerals present in soils and industrial dusts

    Science.gov (United States)

    Wawer, Małgorzata; Rachwał, Marzena; Jabłońska, Mariola; Krzykawski, Tomasz; Magiera, Tadeusz

    2017-04-01

    Many industries (e.g. metallurgy, power, cement, and coking plants) constitute a sources of industrial dusts containing technogenic magnetic particles (TMP). TMP are mostly iron oxides with ferrimagnetic or antiferromagnetic properties, therefore their presence in dusts, soils and sediments can be easily detected by magnetic susceptibility measurements. TMP, thanks their specific mineral and magnetic properties, and well developed specific surface area, are characterized by a chemical affinity for some elements like heavy metals. The main objective of this study was identification of manganese and iron (hydro)oxides occurring in industrial dusts and soils being under their deposition for long time period. In principle, Mn and Fe (hydro)oxides present in these samples originate from high-temperature technological processes. Soils samples (collected from different soil horizons) taken from surroundings of power station, iron/steel and non-ferrous plants as well as metallurgical dusts and fly ashes from power stations were subjected to investigation. During the studies temperature dependent magnetic susceptibility measurements and X-ray powder diffraction analyses were applied. Thermomagnetic analyses (K-T) revealed differences between samples from particular industries, however an inflexion at 450-500°C of all curves was observed indicating a probable occurrence of maghemite- or titanomagnetite-like phases. The curves of TMP emitted by power plants have inflection at 580 °C indicating that magnetite was the main magnetic phase. In case of TMP originated from non-ferrous metal smelting additional curve deflection at 130 and 210 °C occurred relating to intermediate titanomagnetite or iron sulfides. X-ray diffraction proved the occurrence of magnetite and maghemite in almost all samples, especially connected with power industry and iron/steel metallurgy. Mineral analysis revealed that kind of industrial process influenced on the dominating mineral forms found in

  5. Quantitative elemental analysis of an industrial mineral talc, using accelerator-based analytical technique

    Energy Technology Data Exchange (ETDEWEB)

    Olabanji, S.O. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro, viale dell' Universita 2, 35020 Legnaro (Padova) (Italy) and Centre for Energy Research and Development, Obafemi Awolowo University, Ile-Ife (Nigeria)]. E-mail: skayode2002@yahoo.co.uk; Ige, A.O. [Natural History Museum, Obafemi Awolowo University, Ile-Ife (Nigeria); Mazzoli, C. [Dipartimento di Mineralogia e Petrologia, Universita di Padova, 35100 Padova (Italy); Ceccato, D. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro, viale dell' Universita 2, 35020 Legnaro (Padova) (Italy); Dipartimento di Fisica, Universita di Padova, via Marzolo 8, 35100 Padova (Italy); Ajayi, E.O.B. [Department of Physics, Obafemi Awolowo University, Ile-Ife (Nigeria); De Poli, M. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro, viale dell' Universita 2, 35020 Legnaro (Padova) (Italy); Moschini, G. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro, viale dell' Universita 2, 35020 Legnaro (Padova) (Italy); Dipartimento di Fisica, Universita di Padova, via Marzolo 8, 35100 Padova (Italy)

    2005-10-15

    Accelerator-based technique of PIXE was employed for the determination of the elemental concentration of an industrial mineral, talc. Talc is a very versatile mineral in industries with several applications. Due to this, there is a need to know its constituents to ensure that the workers are not exposed to health risks. Besides, microscopic tests on some talc samples in Nigeria confirm that they fall within the BP British Pharmacopoeia standard for tablet formation. However, for these samples to become a local source of raw material for pharmaceutical grade talc, the precise elemental compositions should be established which is the focus of this work. Proton beam produced by the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro, Padova, Italy was used for the PIXE measurements. The results which show the concentration of different elements in the talc samples, their health implications and metabolic roles are presented and discussed.

  6. Phosphates (V) recovery from phosphorus mineral fertilizers industry wastewater by continuous struvite reaction crystallization process.

    Science.gov (United States)

    Hutnik, Nina; Kozik, Anna; Mazienczuk, Agata; Piotrowski, Krzysztof; Wierzbowska, Boguslawa; Matynia, Andrzej

    2013-07-01

    Continuous DT MSMPR (Draft Tube Mixed Suspension Mixed Product Removal) crystallizer was provided with typical wastewater from phosphorus mineral fertilizers industry (pH phosphate(V) ions decreased from 0.445 to 9.2 × 10(-4) mass %. This can be regarded as a very good process result. In product crystals, besides main component - struvite, all impurities from wastewater were detected analytically.

  7. Basalt fiber insulating material with a mineral binding agent for industrial use

    Science.gov (United States)

    Drozdyuk, T.; Aizenshtadt, A.; Tutygin, A.; Frolova, M.

    2016-04-01

    The paper considers a possibility of using mining industry waste as a binding agent for heat insulating material on the basis of basalt fiber. The main objective of the research is to produce a heat-insulating material to be applied in machine building in high-temperature environments. After synthetic binder having been replaced by a mineral one, an environmentally sound thermal insulating material having desirable heat-protecting ability and not failing when exposed to high temperatures was obtained.

  8. Mining space and industrial heritage in Mexico: the mineral from Tlalpujahua [Michoacán state

    OpenAIRE

    Uribe Salas, José Alfredo

    2014-01-01

    This paper deals with the historical dimension of the economic and social space of Tlalpujahua and El Oro Mining District from the perspective of the Industrial Heritage. The exploration and exploitation in search for precious minerals along the sixteenth to the twentieth centuries articulated a culture of wage labour and facilitated the circulation of new knowledge, technical expertise and an impressive technological innovation in the late nineteenth and early twentieth centuries. With the d...

  9. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: US Forest Service (FS) Newberry Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  10. 2007 Oregon Department of Geology and Mineral Industries (DoGAMI) LiDAR: Northwest Oregon and Portland Metro Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Watershed Sciences, Inc. collected Light Detection and Ranging (LiDAR) data for the Oregon Department of Geology and Mineral Industries (DoGAMI) and the Oregon...

  11. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: US Forest Service (FS) Newberry Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology and Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  12. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Cascade Volcano Observatory (CVO) Newberry Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  13. 2007 Oregon Department of Geology and Mineral Industries (DoGAMI) LiDAR: Northwest Oregon and Portland Metro Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Watershed Sciences, Inc. collected Light Detection and Ranging (LiDAR) data for the Oregon Department of Geology and Mineral Industries (DoGAMI) and the Oregon...

  14. Industrial minerals and rocks: Present trends in exploration, exploitation and use

    Science.gov (United States)

    Lüttig, Gred W.

    Today the industrial minerals and rocks are the most important mineral resource group as far as quantity goes and after the energy carriers the most significant as far as value goes. Their value is rising constantly and in their use there are possibilities for projects with low investment costs and quick cash flow. This is important for the developing countries in particular. Since it is partly a matter of near surface bulk raw materials; their use involves local conflicts with other utilization claims. It is necessary for the geoscience to work out suggestions for solutions to these conflicts, to simultaneously mobilize research and training capacities and in face of the present desperate situation to improve them so that a better contribution than is presently being made can be made by this professional field for the public welfare.

  15. THE MINER INDUSTRY FROM JIU VALLEY – ENVIRONMENTAL AND SOCIAL INFLUENCES

    Directory of Open Access Journals (Sweden)

    BĂDĂU ADRIAN-BOGDAN

    2014-05-01

    Full Text Available Situated in the middle of the MERIDIONAL CARPATHIENS, the DEPRESSION OF JIU VALLEY represents the main pitcoal basin of Romania. In the last century, the extraction activity had a major influence on the developement of the region.The influences and the effects of the miner industry can be classified in two big groups: positive effects which means the acceleration of the economical developement, of the means of communication and the increase of the population and negative effects being the main source of pollution of the region.

  16. Projecto industrial de uma unidade de enchimento de água mineral

    OpenAIRE

    Landeiroto, Ana; Monteiro, Andreia Paulino; Guiné, Raquel

    2016-01-01

    A partir do trabalho realizado no âmbito da disciplina de Seminário de Projecto da Licenciatura em Engenharia das Indústrias Agro-Alimentares, apresenta-se um pequeno resumo do projecto de uma unidade industrial para enchimento de água mineral, com uma capacidade de produção de 50 milhões de litros anuais. Para a realização deste trabalho efectuaram-se diversos estudos, que incluíram uma breve análise económica, a partir da qual se verifica a viabilidade deste projecto....

  17. Sustainable Non-Metallic Building Materials

    Directory of Open Access Journals (Sweden)

    Svetlana Tretsiakova-McNally

    2010-01-01

    Full Text Available Buildings are the largest energy consumers and greenhouse gases emitters, both in the developed and developing countries. In continental Europe, the energy use in buildings alone is responsible for up to 50% of carbon dioxide emission. Urgent changes are, therefore, required relating to energy saving, emissions control, production and application of materials, use of renewable resources, and to recycling and reuse of building materials. In addition, the development of new eco-friendly building materials and practices is of prime importance owing to the growing environmental concerns. This review reflects the key tendencies in the sector of sustainable building materials of a non-metallic nature that have occurred over the past decade or so.

  18. The minerals industry of Colombia. Mining of coal; Die Rohstoffwirtschaft Kolumbiens. Der Bergbau auf Kohle

    Energy Technology Data Exchange (ETDEWEB)

    Benthaus, F.C. [Lausitzer und Mitteldeutsche Bergbau-Verwaltungsgesellschaft (LMBV), Berlin (Germany); Hermann, J. [DMT-Montan Consulting GmbH, Essen (Germany); Schmidt-Thome, M. [Bundesanstalt fuer Geowissenschaften und Rohstoffe (BGR), Hannover (Germany)

    2001-09-01

    Colombia's topography in the Northwest of Latin America is characterised by the Andes-Cordillera. At the slopes of these mountains, coal deposits formed during the Cretaceous and Tertiary which were tectonically stressed as a result of the Andean orogeny. Colombia's hard coal reserves coming to approximately 22 billion t SKE (hard coal equivalent) are the largest in Latin America. More than 6.5 billion t of it are proven mineral reserves. In 2000, 38 Mt of steam and pulverised injection coal with low sulphur and ash content were extracted, 34 Mt of were predominantly exported to Europe. Since 1985, large opencast mines with shovel and truck are operated at the Caribbean coast as well as underground mines with room and pillar are operated by national and international consortia. The transportation to the ports is hereby the bottleneck and increases the extraction costs strongly. Small- and medium-scale mines in the inland produce for the local markets (power generation, industrial heating). The low technical equipment and simple safety standards enable an economic mining mostly in drift mines. Difficult topographic conditions badly influencing the road transportation and the neglected railway system raise the prices of minerals considerably. Small-scale operations (for example family type or artisanal) for mining minerals near to the surface are out of state influence and control. Apart from several safety problems caused by Guerrilla groups, Colombia meets all requirements to become one of the important mining countries in the world. (orig.)

  19. Potential Applications of Concentrated Solar Thermal Technologies in the Australian Minerals Processing and Extractive Metallurgical Industry

    Science.gov (United States)

    Eglinton, Thomas; Hinkley, Jim; Beath, Andrew; Dell'Amico, Mark

    2013-12-01

    The Australian minerals processing and extractive metallurgy industries are responsible for about 20% of Australia's total greenhouse gas (GHG) emissions. This article reviews the potential applications of concentrated solar thermal (CST) energy in the Australian minerals processing industry to reduce this impact. Integrating CST energy into these industries would reduce their reliance upon conventional fossil fuels and reduce GHG emissions. As CST technologies become more widely deployed and cheaper, and as fuel prices rise, CST energy will progressively become more competitive with conventional energy sources. Some of the applications identified in this article are expected to become commercially competitive provided the costs for pollution abatement and GHG mitigation are internalized. The areas of potential for CST integration identified in this study can be classed as either medium/low-temperature or high-temperature applications. The most promising medium/low-grade applications are electricity generation and low grade heating of liquids. Electricity generation with CST energy—also known as concentrated solar power—has the greatest potential to reduce GHG emissions out of all the potential applications identified because of the 24/7 dispatchability when integrated with thermal storage. High-temperature applications identified include the thermal decomposition of alumina and the calcination of limestone to lime in solar kilns, as well as the production of syngas from natural gas and carbonaceous materials for various metallurgical processes including nickel and direct reduced iron production. Hybridization and integration with thermal storage could enable CST to sustain these energy-intensive metallurgical processes continuously. High-temperature applications are the focus of this paper.

  20. Minerals

    Directory of Open Access Journals (Sweden)

    Vaquero, M. P.

    1998-08-01

    Full Text Available The possible changes in the mineral composition of food during frying could be the consequence of losses by leaching, or changes in concentrations caused by exchanges between the food and culinary fat of other compounds. The net result depends on the type of food, the frying fat used and the frying process. Moreover, the modifications that frying produces in other nutrients could indirectly affect the availability of dietary minerals. The most outstanding ones are those that can take place in the fat or in the protein. With respect to the interactions between frying oils and minerals, we have recent knowledge concerning the effects of consuming vegetable oils used in repeated fryings of potatoes without turnover, on the nutritive utilization of dietary minerals. The experiments have been carried out in pregnant and growing rats, which consumed diets containing, as a sole source of fat, the testing frying oils or unused oils. It seems that the consumption of various frying oils, with a polar compound content lower or close to the maximum limit of 25% accepted for human consumption, does not alter the absorption and metabolism of calcium, phosphorous, iron or copper. Magnesium absorption from diets containing frying oils tends to increase but the urinary excretion of this element increases, resulting imperceptible the variations in the magnesium balance. The urinary excretion of Zn also increased although its balance remained unchanged. Different studies referring to the effects of consuming fried fatty fish on mineral bioavailability will also be presented. On one hand, frying can cause structural changes in fish protein, which are associated with an increase in iron absorption and a decrease in body zinc retention. The nutritive utilization of other elements such as magnesium, calcium and copper seems to be unaffected. On the other hand; it has been described that an excess of fish fatty acids in the diet produces iron depletion, but when fatty

  1. Size of Non-Metallic Inclusions in High-Grade Medium Carbon Steel

    Directory of Open Access Journals (Sweden)

    Lipiński T.

    2014-12-01

    Full Text Available Non-metallic inclusions found in steel can affect its performance characteristics. Their impact depends not only on their quality, but also, among others, on their size and distribution in the steel volume. The literature mainly describes the results of tests on hard steels, particularly bearing steels. The amount of non-metallic inclusions found in steel with a medium carbon content melted under industrial conditions is rarely presented in the literature. The tested steel was melted in an electric arc furnace and then desulfurized and argonrefined. Seven typical industrial melts were analyzed, in which ca. 75% secondary raw materials were used. The amount of non-metallic inclusions was determined by optical and extraction methods. The test results are presented using stereometric indices. Inclusions are characterized by measuring ranges. The chemical composition of steel and contents of inclusions in every melts are presented. The results are shown in graphical form. The presented analysis of the tests results on the amount and size of non-metallic inclusions can be used to assess them operational strength and durability of steel melted and refined in the desulfurization and argon refining processes.

  2. Fundamental aspects of oily waters treatment from the mineral industries by electrolytic techniques

    Energy Technology Data Exchange (ETDEWEB)

    Merma, A.G.; Gonzales, L.V.; Torem, M.L. [Pontifical Catholic Univ. of Rio de Janeiro, Rio de Janeiro (Brazil). Dept. of Materials Engineering

    2010-07-01

    There is an immediate need to develop innovative and more effective techniques for treatment of wastewaters as regulations on effluent wastewater discharge are becoming increasingly prevalent. The mining and metallurgical industries generate wastewaters that contain stable oil-in-water emulsions, arising from residues of liquid streams that serve the purpose of lubrication, cooling, cleaning and corrosion prevention in the equipment used in those industries. Chemically stabilized oil-water emulsions produced in the mineral industries can be treated using an electrocoagulation technique that considers the effects of operating parameters such as initial pH, current density, reaction time, electrode area/liquid volume ratio and electrode materials on the separation of oil as measured by the chemical oxygen demand. The paper discussed electrocoagulation as well as the materials and methods for the study, including oil in water emulsions; the experimental apparatus; and the experimental procedure. It was concluded that the electrolysis of this kind of oil in water emulsions with aluminum electrodes resulted in pH neutralization regardless of the initial pH tested. 18 refs., 4 figs.

  3. Mineralization of synthetic and industrial pharmaceutical effluent containing trimethoprim by combining electro-Fenton and activated sludge treatment

    OpenAIRE

    Mansour, Dorsaf; Fourcade, Florence; Soutrel, Isabelle; Hauchard, Didier; Bellakhal, Nizar; Amrane, Abdeltif

    2015-01-01

    International audience; A combined process coupling of an electro-Fenton and a biological degradation was investigated in order to mineralize synthetic and industrial pharmaceutical effluent containing trimethoprim, a bacteriostatic antibiotic. Electro-Fenton degradation of trimethoprim was optimized by means of a Doehlert experimental design, showing that 0.69 mM Fe2+, 466 mA and 30 min electrolysis time were optimal, leading to total trimethoprim removal, while mineralization remained limit...

  4. The potential for ore and industrial minerals in the Forsmark area

    Energy Technology Data Exchange (ETDEWEB)

    Lindroos, Hardy [MIRAB Mineral Resurser AB, Uppsala (Sweden); Isaksson, Hans; Thunehed, Hans [GeoVista AB, Luleaa (Sweden)

    2004-03-01

    A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc

  5. Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

    Directory of Open Access Journals (Sweden)

    Camila Prado Cenciani de Souza

    2013-08-01

    Full Text Available Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor, which is citric acid 2 % (2 % CA (Brasil, 2007b, is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl (Brasil, 2007a. The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC, buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 % and commercial granular zinc (142 % and lower with brass slag I and II (67 and 27 %, respectively. The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no

  6. Occupational exposure to natural radioactivity in the zirconium mineral manufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Ballesteros, L.; Zarza, I.; Ortiz, J.; Serradell, V. [Valencia Univ. Politecnica, Lab. de Radiactividad Ambiental (Spain)

    2006-07-01

    The spanish 'Real Decatur 783/2001', published as result of the adaptation of the European Council directive 96/29/EURATOM (B.S.S. directive), regulates in Spain the use of natural radioactive substances. This decree establishes the need to study and control those activities in which significant increases of the exposure of workers or members of the public could take place. One of these natural radioactive substances are zirconium minerals. They are widely employed in some industrial activities, such as the production of zirconia and zirconium chemicals, glazed ceramic products manufacture, refractories, foundry sands (including investment casting) and zirconium mineral manufacturing. Its major end uses are fine ceramics where it acts as an opacifier in glazes and enamels and also as an additive in special glass (i.e. TV glass). This paper provides a description of a measurement campaign carried out to estimate the risk of occupational exposure to natural radioactivity in the zirconium mineral manufacturing industries. Zirconium raw sands have generally a granular size of 100 to 200 {mu}m, which may be reduced to around 2 {mu}m for use in ceramics and paint applications by milling to flour. These sands contain varying concentrations of natural radionuclides: {sup 232}Th,{sup 235}U, and mostly {sup 238}U, together with their progenies. The first part of the study is to identify situations and areas where worker s are exposed to radiation. Five pathways of exposure were found: inhalation of dust, ingestion of dust, inhalation of radon, skin contamination and external irradiation. Samples from raw materials and from the environment at the work areas are performed; both where the zircon sands are unloaded and stored and at the milling area. Secondly, collected samples are analysed to evaluate activities on those natural radionuclides. Gamma spectrometry analysis is performed for the whole of the samples. For this purpose, a Ge-HP detector (high purity Ge

  7. Preparation of pure calcium carbonate by mineral carbonation using industrial byproduct FGD gypsum

    Science.gov (United States)

    Song, K.; Kim, W.; Bang, J. H.; Park, S.; Jeon, C. W.

    2015-12-01

    Mineral carbonation is one of the geological approaches for the sequestration of anthropogenic CO2 gas. Its concept is based on the natural weathering processes in which silicate minerals containing divalent cations such as Ca or Mg are carbonated to CaCO3 or MgCO3 in the reaction with CO2gas. Raw materials for the mineral carbonation have been extended to various industrial solid wastes such as steel slag, ashes, or FGD (flue gas desulfurization) gypsum which are rich in divalent cations. These materials have economic advantages when they are produced in CO2 emission sites. Flue gas desulfurization (FGD) gypsum is such a byproduct obtained in at coal-fired power plants. Recently, we carried out a research on the direct mineral carbonation of FGD gypsum for CO2sequestration. It showed high carbonation reactivity under ambient conditions and the process can be described as follows: CaSO4·2H2O + CO2(g) + 2NH4OH(aq) → CaCO3(s) + (NH4)2SO4(aq) (1) At the early stage of the process, calcium carbonate (CaCO3) exists as a dissolved ion pair during the induction period. High-purity CaCO3 could be precipitated from dissolved calcium carbonate solution extracted during the induction period. The effect of experimental parameters on pure CaCO3 was evaluated: CO2 flow rate (1-3 L/min), ammonia content (4-12%), and solid-to-liquid (S/L) ratio (5-300 g/L). FE-SEM (field-emission scanning electron microscopy) and XRD (X-ray diffraction) study revealed that the precipitated CaCO3 was round-shaped vaterite crystals. The induction time was inversely proportional to the CO2 flow rate and the yield for pure CaCO3 increased with the ammonia content. The formation efficiency for pure CaCO3 decreased with S/L (solid/liquid) ratio. It was 90% (mol/mol) when the S/L ratio was 5 g/L. However, S/L ratio didn't affect the maximum solubility limit of dissolved CaCO3.

  8. Necessity for Industry-Academic Economic Geology Collaborations for Energy Critical Minerals Research and Development

    Science.gov (United States)

    Hitzman, M.

    2012-12-01

    Economic geology is a highly interdisciplinary field utilizing a diverse set of petrologic, geochemical, geophysical, and tectonic data for improved scientific understanding of element migration and concentration in the crust (ore formation). A number of elements that were once laboratory curiosities now figure prominently in new energy technologies (e.g. wind turbines, solar energy collectors). If widely deployed, such technologies have the capacity to transform the way we produce, transmit, store, and conserve energy. To meet domestic and worldwide renewable energy needs these systems must be scaled from laboratory, to demonstration, to widespread deployment. Such technologies are materials intensive. If widely deployed, the elements required by these technologies will be needed in significant quantities and shortage of these "energy critical elements" could significantly inhibit the adoption of otherwise game changing energy technologies. It is imperative to better understand the geology, metallurgy, and mining engineering of critical mineral deposits if we are to sustainably develop these new technologies. There is currently no consensus among federal and state agencies, the national and international mining industry, the public, and the U.S. academic community regarding the importance of economic geology to secure sufficient energy critical elements to undertake large-scale renewable energy development. Available federal funding for critical elements focuses on downstream areas such as metallurgy, substitutions, and recycling rather than primary deposits. Undertaking the required research to discover and mine critical element deposits in an environmentally friendly manner will require significant partnering with industry due to the current lack of federal research support.

  9. Environmental surveys in the European man-made mineral fiber production industry.

    Science.gov (United States)

    Cherrie, J; Dodgson, J; Groat, S; Maclaren, W

    1986-01-01

    This paper presents estimates of airborne fiber concentrations and fiber size for European man-made mineral fiber (MMMF) factories on the basis of measurements made in 1977-1980. The airborne fiber concentrations previously reported at a conference of the World Health Organization (WHO) and the International Agency for Research on Cancer in 1982 have been revised to harmonize the results with the WHO-European MMMF reference counting level. The result was an approximate doubling of the reported airborne fiber levels. After the revisions the average combined occupational group concentrations in the rock- and glass-wool plants were still generally low (less than 0.01 fibers/ml). In the glass continuous-filament factories the airborne fiber concentrations were very low (less than 0.01 fibers/ml). The average plant median for fiber length ranged from 10 to 20 microns, and the corresponding median diameters ranged from 0.7 to 2 microns. In general the glass-wool fibers were thinner than the rock-wool fibers. The fiber concentrations measured in other studies in the MMMF production and user industries are reviewed. Higher levels (between 0.1 and 1.0 fibers/ml) have been measured in some insulation wool production, secondary production, and user industries. The highest levels (greater than 1.0 fibers/ml) occurred in very fine glass-fiber production and in other specialist insulation wool usage.

  10. Procedure to use phosphogypsum industrial waste for mineral CO2 sequestration.

    Science.gov (United States)

    Cárdenas-Escudero, C; Morales-Flórez, V; Pérez-López, R; Santos, A; Esquivias, L

    2011-11-30

    Industrial wet phosphoric acid production in Huelva (SW Spain) has led to the controversial stockpiling of waste phosphogypsum by-products, resulting in the release of significant quantities of toxic impurities in salt marshes in the Tinto river estuary. In the framework of the fight against global climate change and the effort to reduce carbon dioxide emissions, a simple and efficient procedure for CO(2) mineral sequestration is presented in this work, using phosphogypsum waste as a calcium source. Our results demonstrate the high efficiency of portlandite precipitation by phosphogypsum dissolution using an alkaline soda solution. Carbonation experiments performed at ambient pressure and temperature resulted in total conversion of the portlandite into carbonate. The fate of trace elements present in the phosphogypsum waste was also investigated, and trace impurities were found to be completely transferred to the final calcite. We believe that the procedure proposed here should be considered not only as a solution for reducing old stockpiles of phosphogypsum wastes, but also for future phosphoric acid and other gypsum-producing industrial processes, resulting in more sustainable production.

  11. Deposits of rocks, earths, and industrial minerals. Lagerstaetten der Steine, Erden und Industrieminerale. Untersuchung und Bewertung (Vademecum 2)

    Energy Technology Data Exchange (ETDEWEB)

    Stein, V.

    1981-01-01

    The 'Vademecum 2' of the GDMB gives a summary of the main criteria for a study and evaluation of deposits of rocks, earths, and industrial minerals. Besides a general description of study and evaluation methods, the data required for an evaluation of individual rocks, rock groups, or minerals are clearly presented and discussed. The standards and provisions are not of importance but rather the quality requirements made by industrial buyers today. Prospection references are given for nearly all types of rock. The authors show the present state of the art in this important field of basic industry. The practice-orientated evaluation has been achieved with the help of experts from industry, science, and state and Laender authorities.

  12. Numerical 2D and 3D Investigation of Non-Metallic (Glass, Carbon) Fiber Pull-Out Micromechanics 9in Concrete Matrix)

    OpenAIRE

    Khabaz, A; Krasņikovs, A; Kononova, O; Mačanovskis, A

    2010-01-01

    Short non-metallic (glass, carbon) fibre use for concrete disperse reinforcment is of particular interest, because of much higher fibre/matrix interface area value comparing to industrially produced steel fibres.

  13. The potential for ore, industrial minerals and commercial stones in the Simpevarp area

    Energy Technology Data Exchange (ETDEWEB)

    Lindroos, Hardy [MIRAB Mineral Resurser AB, Uppsla (Sweden)

    2004-10-01

    On behalf of SKB (the Swedish Nuclear Fuel and Waste Management Company), a survey has been made of existing information concerning the potential for ore, industrial minerals and commercial stones in and around the two candidate areas for a deep repository in Oskarshamn. A deep repository for spent nuclear fuel should not be located in a rock type or in an area where mineral extraction might be considered in the future, since this would make it difficult or impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities.The survey has made use of the geoscientific information compiled in the more regional investigations in Oskarshamn Municipality in 1998-99. The new information after the municipal study includes extensive geophysical measurements from both the air and the ground. The results of the recently completed geophysical helicopter survey of the Simpevarp area are presented in a special chapter. The judgement of an area's ore potential is in part based on the evaluation of these geophysical measurements. In order to be better able to judge the ore potential, a geochemical investigation of soil samples, including reanalysing of older samples collected by the Geological Survey of Sweden (SGU), has been carried out. The report also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. In cooperation with SGU a mineral resource map of the Simpevarp area has been prepared. The map shows two areas with a potential for commercial stones, namely the granites at Goetemar and Uthammar, situated in the northernmost respectively the southernmost part of the study area. Furthermore, the Goetemar granite has probably a small potential for ores containing tin (Sn) and/or wolfram (W). Although no mineralizations of this type have so far been found, the Goetemar granite area may be unsuitable or

  14. NON-METALLIC IMPURITIES AND FORMING OF THE STRUCTURE OF THE MODIFIED HIGH-MANGANESE STEEL

    Directory of Open Access Journals (Sweden)

    A. I. Garost

    2006-01-01

    Full Text Available The composition and morphology of chemical associations (non-metallic impurities and other ‘‘secondary” phases at modification of high-manganese steel by nitrogen and nitrideforming elements (vanadium are investigated. The optimal compositions of steel for production of castings are offered. The technology of the steel wear-resistance modification by vanadium of waste of industrial enterprises is worked out.

  15. Studies on the preparation of value-added products for industrial minerals

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This report consists of 2 subjects. 1) Studies on the preparation of value-added products for limestone: This study has investigated to raise to high grade by economical processes with low grade of domestic limestone. We investigated the status of application utilize and related industries with the domestic limestone, and then being consideration with condition selected the adequate sample from Andong, Jungsun and Kumsan area. Magnetic materials were involved in impurities of sample, so magnetic separation method was applied in elimination of the ferro- and para-magnetic materials, such as chlorite, muscovite, quartz, dolomite, magnetite, feldspar and so on. Investigation of flotation was undertaken to eliminate impurities from limestone crude ore and the tests were performed to get a optimum condition adding oleic acid as a promoter, sodium silicate and sodium carbonate as a conditioning agents and MIBC as a frother, while to float the sulfide minerals added amyl xanthate as a promoter, and sulfuric acid as a pH regulator. Selective crushing and classification methods were performed to eliminate impurities depends on the mineral properties and should be the selective crushing methods are very useful at the manufacturing factory of heavy calcium carbonate with the dry milling system. 2) A study on development of value added technology of pyrophyllite and dickite: Pyrophyllite and dickite have being utilized as refractories, ceramics, cement, fiber glass, paper, rubber, paints etc. However, there are not any domestic companies to produce fillers of pyrophyllite and dickite for plastic and rubber. Moreover, several kinds of fillers are imported every year with expensive price for plastic and rubber filler. This study has purpose to develop manufacturing technologies to produce fillers for plastic and rubber of pyrophyllite and dickite. The chemical and mineralogical properties of samples, the optimum grinding condition and device for producing plastic fillers and

  16. Comprehensive assessment of exposures to elongate mineral particles in the taconite mining industry.

    Science.gov (United States)

    Hwang, Jooyeon; Ramachandran, Gurumurthy; Raynor, Peter C; Alexander, Bruce H; Mandel, Jeffrey H

    2013-10-01

    Since the 1970s, concerns have been raised about elevated rates of mesothelioma in the vicinity of the taconite mines in the Mesabi Iron Range. However, insufficient quantitative exposure data have hampered investigations of the relationship between cumulative exposures to elongate mineral particles (EMP) in taconite dust and adverse health effects. Specifically, no research on exposure to taconite dust, which includes EMP, has been conducted since 1990. This article describes a comprehensive assessment of present-day exposures to total and amphibole EMP in the taconite mining industry. Similar exposure groups (SEGs) were established to assess present-day exposure levels and buttress the sparse historical data. Personal samples were collected to assess the present-day levels of worker exposures to EMP at six mines in the Mesabi Iron Range. The samples were analyzed using National Institute for Occupational Safety and Health (NIOSH) methods 7400 and 7402. For many SEGs in several mines, the exposure levels of total EMP were higher than the NIOSH Recommended Exposure Limit (REL). However, the total EMP classification includes not only the asbestiform EMP and their non-asbestiform mineral analogs but also other minerals because the NIOSH 7400 cannot differentiate between these. The concentrations of amphibole EMP were well controlled across all mines and were much lower than the concentrations of total EMP, indicating that amphibole EMP are not major components of taconite EMP. The levels are also well below the NIOSH REL of 0.1 EMP cc(-1). Two different approaches were used to evaluate the variability of exposure between SEGs, between workers, and within workers. The related constructs of contrast and homogeneity were calculated to characterize the SEGs. Contrast, which is a ratio of between-SEG variability to the sum of between-SEG and between-worker variability, provides an overall measure of whether there are distinctions between the SEGs. Homogeneity, which is

  17. Procedure to use phosphogypsum industrial waste for mineral CO{sub 2} sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Cardenas-Escudero, C. [Departamento de Fisica de la Materia Condensada, Facultad de Fisica, Universidad de Sevilla, Av. Reina Mercedes s/n, 41012 Seville (Spain); Instituto de Ciencia de Materiales de Sevilla (CSIC-US), Av. Americo Vespucio, 49, 41092 Seville (Spain); Morales-Florez, V., E-mail: victor.morales@icmse.csic.es [Instituto de Ciencia de Materiales de Sevilla (CSIC-US), Av. Americo Vespucio, 49, 41092 Seville (Spain); Perez-Lopez, R. [Departamento de Geologia, Facultad de Ciencias Experimentales, Universidad de Huelva, Campus Universitario Campus del Carmen, Avenida de las Fuerzas Armadas, 21071 Huelva (Spain); Instituto de Diagnostico Ambiental y Estudios del Agua (IDAeA-CSIC), Jordi Girona 18, 08034 Barcelona (Spain); Santos, A. [Departamento de Ciencias de la Tierra, Universidad de Cadiz, Campus del Rio San Pedro, Av. Republica Saharaui s/n, 11510 Puerto Real (Spain); Esquivias, L. [Departamento de Fisica de la Materia Condensada, Facultad de Fisica, Universidad de Sevilla, Av. Reina Mercedes s/n, 41012 Seville (Spain); Instituto de Ciencia de Materiales de Sevilla (CSIC-US), Av. Americo Vespucio, 49, 41092 Seville (Spain)

    2011-11-30

    Highlights: Black-Right-Pointing-Pointer Phosphogypsum wastes are proposed to reduce CO{sub 2} greenhouse gas emissions. Black-Right-Pointing-Pointer Phosphogypsum dissolution with NaOH results in Ca(OH){sub 2} precipitation and Na{sub 2}SO{sub 4}. Black-Right-Pointing-Pointer Aqueous carbonation of Ca(OH){sub 2} with CO{sub 2} results in the CaCO{sub 3} precipitation. Black-Right-Pointing-Pointer Metals contained in the phosphogypsum are transferred to the final calcite. Black-Right-Pointing-Pointer Applications of CaCO{sub 3} and Na{sub 2}SiO{sub 4} by-products are proposed to improve viability. - Abstract: Industrial wet phosphoric acid production in Huelva (SW Spain) has led to the controversial stockpiling of waste phosphogypsum by-products, resulting in the release of significant quantities of toxic impurities in salt marshes in the Tinto river estuary. In the framework of the fight against global climate change and the effort to reduce carbon dioxide emissions, a simple and efficient procedure for CO{sub 2} mineral sequestration is presented in this work, using phosphogypsum waste as a calcium source. Our results demonstrate the high efficiency of portlandite precipitation by phosphogypsum dissolution using an alkaline soda solution. Carbonation experiments performed at ambient pressure and temperature resulted in total conversion of the portlandite into carbonate. The fate of trace elements present in the phosphogypsum waste was also investigated, and trace impurities were found to be completely transferred to the final calcite. We believe that the procedure proposed here should be considered not only as a solution for reducing old stockpiles of phosphogypsum wastes, but also for future phosphoric acid and other gypsum-producing industrial processes, resulting in more sustainable production.

  18. Review of selected global mineral industries in 2011 and an outlook to 2017

    Science.gov (United States)

    Menzie, W. David; Soto-Viruet, Yadira; Bermúdez-Lugo, Omayra; Mobbs, Philip M.; Perez, Alberto Alexander; Taib, Mowafa; Wacaster, Susan; ,

    2013-01-01

    This report reviews the world production of selected mineral commodities in 2011 and includes output projections (based on planned capacity expansions) through 2017. It also includes brief discussions of several issues that are of importance to the mineral sector, including the world economy, the availability of strategic minerals, significant company mergers and acquisitions in 2011, exploration investment made during the year, and the moves towards resource nationalization and expropriation of mineral assets by national Governments.

  19. Laser cladding of tungsten carbides (Spherotene) hardfacing alloys for the mining and mineral industry

    Energy Technology Data Exchange (ETDEWEB)

    Amado, J.M. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain); Tobar, M.J. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain)], E-mail: cote@udc.es; Alvarez, J.C.; Lamas, J.; Yanez, A. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain)

    2009-03-01

    The abrasive nature of the mechanical processes involved in mining and mineral industry often causes significant wear to the associated equipment and derives non-negligible economic costs. One of the possible strategies to improve the wear resistance of the various components is the deposition of hardfacing layers on the bulk parts. The use of high power lasers for hardfacing (laser cladding) has attracted a great attention in the last decade as an alternative to other more standard methods (arc welding, oxy-fuel gas welding, thermal spraying). In laser cladding the hardfacing material is used in powder form. For high hardness applications Ni-, Co- or Fe-based alloys containing hard phase carbides at different ratios are commonly used. Tungsten carbides (WC) can provide coating hardness well above 1000 HV (Vickers). In this respect, commercially available WC powders normally contain spherical micro-particles consisting of crushed WC agglomerates. Some years ago, Spherotene powders consisting of spherical-fused monocrystaline WC particles, being extremely hard, between 1800 and 3000 HV, were patented. Very recently, mixtures of Ni-based alloy with Spherotene powders optimized for laser processing were presented (Technolase). These mixtures have been used in our study. Laser cladding tests with these powders were performed on low carbon steel (C25) substrates, and results in terms of microstructure and hardness will be discussed.

  20. Laser cladding of tungsten carbides (Spherotene ®) hardfacing alloys for the mining and mineral industry

    Science.gov (United States)

    Amado, J. M.; Tobar, M. J.; Alvarez, J. C.; Lamas, J.; Yáñez, A.

    2009-03-01

    The abrasive nature of the mechanical processes involved in mining and mineral industry often causes significant wear to the associated equipment and derives non-negligible economic costs. One of the possible strategies to improve the wear resistance of the various components is the deposition of hardfacing layers on the bulk parts. The use of high power lasers for hardfacing (laser cladding) has attracted a great attention in the last decade as an alternative to other more standard methods (arc welding, oxy-fuel gas welding, thermal spraying). In laser cladding the hardfacing material is used in powder form. For high hardness applications Ni-, Co- or Fe-based alloys containing hard phase carbides at different ratios are commonly used. Tungsten carbides (WC) can provide coating hardness well above 1000 HV (Vickers). In this respect, commercially available WC powders normally contain spherical micro-particles consisting of crushed WC agglomerates. Some years ago, Spherotene ® powders consisting of spherical-fused monocrystaline WC particles, being extremely hard, between 1800 and 3000 HV, were patented. Very recently, mixtures of Ni-based alloy with Spherotene powders optimized for laser processing were presented (Technolase ®). These mixtures have been used in our study. Laser cladding tests with these powders were performed on low carbon steel (C25) substrates, and results in terms of microstructure and hardness will be discussed.

  1. PHYTOAVAILABILITY OF COPPER IN INDUSTRIAL BY-PRODUCTS AND MINERAL FERTILIZERS

    Directory of Open Access Journals (Sweden)

    Camila Prado Cenciani de Souza

    2015-04-01

    Full Text Available Alternative copper (Cu sources could be used in fertilizer production, although the bioavailability of copper in these materials is unknown. The objective of this study was to evaluate the extractants neutral ammonium citrate (NAC, 2 % citric acid, 1 % acetic acid, 10 % HCl, 10 % H2SO4, buffer solution pH 6.0, DTPA, EDTA, water, and hot water in the quantification of available Cu content in several sources, relating them to the relative agronomic efficiency (RAE of wheat grown in a clayey Latossolo Vermelho eutrófico (Oxisol and Neossolo Quartzarênico (Typic Quartzipsamment. Copper was applied at the rate of 1.5 mg kg-1 as scrap slag, brass slag, Cu ore, granulated copper, and copper sulfate. The extractants 10 % HCl, 10 % H2SO4, and NAC extracted higher Cu concentrations. The RAE values of brass slag and Cu ore were similar to or higher than those of Cu sulfate and granulated Cu. Solubility in the 2nd NAC extractant, officially required for mineral fertilizers with Cu, was lower than 60 % for the scrap slag, Cu ore, and granulated copper sources. This fact indicates that adoption of the NAC extractant may be ineffective for industrial by-products, although no extractant was more efficient in predicting Cu availability for wheat fertilized with the Cu sources tested.

  2. THE ANALYSIS OF THE GEOLOGICAL AND ECONOMIC MINERAL RESOURCES IN THE RAIL ROAD CORRIDOR "URAL INDUSTRIAL – URAL POLAR"

    Directory of Open Access Journals (Sweden)

    V.P. Pakhomov

    2007-06-01

    Full Text Available The article brings forth the geological-economic analysis of the mineral resource in the area of the transport corridor "Urals industrial – Urals Polar". Given is the analysis of the potential finding of coal on the territory, chromate and other important excavations, the whereabouts of which are more easily approachable for the acquiring with the condition of building a railroad with the path of station Polunochnoye-Obskaya. Given are the possible masses of the delivery of the products accordingly. Distinguished is the size of the investments, that are needed for the mineral resources of the given territory.

  3. Motion behavior of non-metallic particles under high frequency magnetic field

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhong-tao; GUO Qing-tao; YU Feng-yun; LI Jie; ZHANG Jian; LI Ting-ju

    2009-01-01

    Non-metallic particles, especially alumina, are the main inclusions in aluminum and its alloys. Numerical simulation and the corresponding experiments were carried out to study the motion behavior of alumina particles in commercial pure aluminum under high frequency magnetic field. At the meantime, multi-pipe experiment was also done to discuss the prospect of continuous elimination of non-metallic particles under high frequency magnetic field. It is shown that: 1) results of numerical simulation are in good agreement with the experimental results, which certificates the rationality of the simulation model; 2) when the intensity of high frequency magnetic field is 0.06 T, the 30 μm alumina particles in melt inner could migrate to the edge and be removed within 2 s; 3) multi-pipe elimination of alumina particles under high frequency magnetic field is also effective and has a good prospect in industrial application.

  4. A RISK MANAGEMENT METHODOLOGY FOR NON-METALLIC PROCESS EQUIPMENT

    Directory of Open Access Journals (Sweden)

    J.J. Viviers

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Many companies in South Africa have implemented the risk-based inspection (RBI methodology as a maintenance strategy. The risk involved in operating a piece of equipment, past history, non-destructive examination techniques, failure modes, and many other aspects determine the frequency of inspections required to meet legislation. The main purpose of the RBI methodology is to prevent failures of process equipment. The methodology for risk-based inspection for metal equipment is well-established and has been proven in industry, becoming the norm nationally and internationally. However, it is not possible to apply all the techniques to nonmetallic equipment owing to vast differences between the two types of materials. This paper discusses the results of data gathered on the RBI methodology for nonmetallic equipment, and proposes a risk-based model that can be used to perform a risk assessment for non-metallic equipment in a process plant. The risk assessment can be used to formulate the next inspection interval for the asset.

    AFRIKAANSE OPSOMMING: Verskeie maatskappye in Suid-Afrika het reeds die metodologie van risikogebaseeerde inspeksie (RBI geïmplementeer as deel van ‘n omvattende instandhoudingstrategie. Die risiko betrokke by ‘n fisiese item, bedryfsgeskiedenis, nie-vernietigende toetstegnieke, falingsmodusse, en vele ander aspekte bepaal die frekwensie van inspeksies wat benodig word om aan wetlike vereistes te voldoen. Die hoofdoel van die risiko-gebaseerde metodologie is om faling van prosestoerusting te verhinder. Die metodologie vir risiko-gebaseerde inspeksie van metaaltoerusting is goed bekend en word suksesvol toegepas in die industrie. Dis is egter nie moontlik om al die tegnieke toe te pas op nie-metaaltoerusting nie weens die groot verskeidenheid van materiaaltipes. Hierdie artikel bespreek die data wat ingewin is op die risiko-gebaseerde metodologie vir nie-metaaltipeprosestoerusting, en stel

  5. EARTHWORM PONTOSCOLEXCORETHRURUS AND NITROGEN MINERALIZATION RATE IN INCUBATION EXPERIMENT WITH DIFFERENT QUALITY ORGANIC MATTERS FROM SUGARAGRO-INDUSTRY WASTE

    Directory of Open Access Journals (Sweden)

    J.B.Naik

    2014-02-01

    Full Text Available To investigate the effect of earthworm inoculation on N mineralization rates of different quality organic matters from sugar agro-industry waste, we conducted a green house incubation experiment for 14 weeks in pots containing 7 kg dry soil. There are 12 treatment combinations.Factor I waswith (P and without inoculation of P.corethrurus (N. Factor II was the type of OM which consisted of six levels: (1 without application of OM (control, (2 cow manure (CM, (3 filter cake (FC, (4 sugarcane trash (ST, (5 a mixture of CM + FC and (6 a mixture of CM + ST. The treatments were arranged in a factorial randomized block design with three replications. The amount of released N-NH4 +and N-NO3 - or mineral N was measured during incubation time from 1, 2, 4, 8, and 14 weeks after inoculation of earthworms. There was a significant effect of earthworm inoculation on N mineralization rate of different quality organic matters. Overall, rate of net N mineralization were higher in treatments with earthworm inoculation than without earthworm inoculation and the magnitude of the increase appears to dependent on the quality of organic matters. The largest difference were seen on ST and CM+ST treatments with the increase by 90 % and 157 % and the constant of N mineralization rate by 0.0147 and 0.0180 week-1 for the treatment with earthwormsinoculation.These results suggested that application of sugar agro-industry waste although having low quality can improve soil N availability in sugarcane land when aided by P.corethrurus activity.

  6. Vibration in metal and non-metal incubators.

    Science.gov (United States)

    Youngblut, J M; Lewandowski, W; Casper, G R; Youngblut, W R

    1994-01-01

    The purpose of this study was to determine the amount of vibration transmitted to the surface of an incubator mattress. Empty incubators with metal (n = 12) and non-metal (n = 12) bases were monitored for vibration levels when the incubators were turned "off" and when they were turned "on." High levels of low-frequency vibration were detected in both types of incubators in both conditions. The metal incubators transmitted significantly less vibration to the mattress than did the non-metal incubators at several frequencies in the "off," the "on," and the "adjusted" conditions. These results suggest that infants experience significant whole-body vibration while lying in incubators.

  7. Non-metallic inclusions in high manganese austenitic alloys

    OpenAIRE

    A. Grajcar; L. Bulkowski; U. Galisz

    2011-01-01

    Purpose: The aim of the paper is to identify the type, fraction and chemical composition of non-metallic inclusions modified by rare-earth elements in an advanced group of high-manganese austenitic C-Mn-Si-Al-type steels with Nb and Ti microadditions.Design/methodology/approach: The heats of 3 high-Mn steels of a various content of Si, Al and Ti were melted in a vacuum induction furnace and a modification of non-metallic inclusions was carried out by the mischmetal in the amount of 0.87 g or ...

  8. The Effect of Fine Non-Metallic Inclusions on the Fatigue Strength of Structural Steel

    Directory of Open Access Journals (Sweden)

    Lipiński T.

    2015-04-01

    Full Text Available The article discusses the results of a study investigating the effect of the number of fine non-metallic inclusions (up to 2 µm in size on the fatigue strength of structural steel during rotary bending. The study was performed on 21 heats produced in an industrial plant. Fourteen heats were produced in 140 ton electric furnaces, and 7 heats were performed in a 100 ton oxygen converter. All heats were desulfurized. Seven heats from electrical furnaces were refined with argon, and heats from the converter were subjected to vacuum circulation degassing.

  9. Interaction mechanism of non-metallic particles with crystallization front

    Directory of Open Access Journals (Sweden)

    Żak P. L.

    2017-03-01

    Full Text Available The process of steel solidification in the CCS mould is accompanied by a number of phenomena relating to the formation of non-metallic phase, as well as the mechanism of its interaction with the existing precipitations and the advancing crystallization front. In the solidification process the non-metallic inclusions may be absorbed or repelled by the moving front. As a result a specific distribution of non-metallic inclusions is obtained in the solidified ingot, and their distribution is a consequence of these processes. The interaction of a non-metallic inclusion with the solidification front was analyzed for alumina, for different values of the particle radius. The simulation was performed with the use of own computer program. Each time a balance of forces acting on a particle in its specific position was calculated. On this basis the change of position of alumina particle in relation to the front was defined for a specific radius and original location of the particle with respect to the front.

  10. growth pattern and the industrial development of the lagos region, nigeria

    Directory of Open Access Journals (Sweden)

    Dickson Dare Ajayi

    2013-07-01

    Full Text Available This paper examines the nature, growth and spatial pattern of industries within the Lagos Region. Industrial activities in this region grew progressively over the year from mere brickwork, palm oil mills, printing press, soap factory, and metal container factory to capital intensive manufacturing. Indeed, the number of industrial establishments increased from 122 in 1962 to 637 in 1993. Lagos developed into Nigeria's leading industrial center; especially following the expansion in its service and administrative sectors. Whereas, chemicals and pharmaceutical; and basic metal, iron and steel and fabricated metal products industry groups dominate in industrial scene, wood and wood products (including furniture; and non-metallic mineral products are rare. The spatial pattern shows that industrial establishments vary amongst the industrial estates/areas, and also among the industry groups. Ikeja/Ogballsheri industrial estate/area dominates the industrial scene.

  11. The Opportunities and Challenges of the State-owned Exploration Companies Confronting the Prosperous Mineral Industry

    Science.gov (United States)

    Gao, Bangfei; Xie, Hui

    The stated-owned exploration companies (SOEC), of state-owned enterprises background, go for profits as well as national and social responsibility. The SOEC play significant roles in commercial mineral exploration by taking advantage of their brands, strong financial backing and operation capability to integrate the capital and technology. Since the disadvantage of backwardness, the SOEC have to deal with multiple problems, such as high costs of mineral rights acquisition, multi-cooperation project management, and the criterions for traditional techniques can not adapt the rapid commercial mineral exploration and evaluation. Under the new situation, the SOEC should be careful to make investment decisions, strengthen project management, introduce venture capital funds, and cooperate with the government and the state-owned exploration institution (SOEI). It's suggested to carry out small-scale assembled explorations to reduce the exploration risks and costs, and to increase the exploration success rate.

  12. The Genesis of tectonically and hydrothermally controlled industry mineral deposits: A geochemical and structural study

    Science.gov (United States)

    Wölfler, Anke; Prochaska, Walter; Henjes-Kunst, Friedhelm; Fritz, Harald

    2010-05-01

    The study aims to investigate the role of hydrothermal fluids in the formation of talc and magnesite deposits. These deposits occur in manifold geological and tectonical settings such as stockworks and veins within ultramafite hostrocks and monomineralic lenses within marine platform sediments. Along shear zones talc mineralizations may occur as a result of tectonical and hydrothermal activity. To understand the role of the fluids for the genesis of the mineralization, deposits in different geological and tectonical settings are investigated: Talc mineralization within in magnesite in low-grade palaeozoic nappe complexes (Gemerska Poloma, Slovakia): The magnesite body lies within the Gemer unit of the Inner Carpathians consisting of Middle Triassic metacarbonates and Upper Triassic pelagic limestones and radiolarites. The talc mineralization is bound to crosscutting veins. Two metamorphic events can be distinguished, one during Variscan orogeny and one related to the Alpine orogeny leading to the formation of talc along faults in an Mg carbonate body (Radvanec et al, 2004).The origin of the fluids as well as the tectonic events leading to the mineralization is still widely unknown. Talc mineralization in shearzones within Palaeozoic meta sedimentary rocks (Sa Matta, Sardinia): Variscan granitoids intruded Palaeozoic meta sedimentary rocks and were overprinted be NE striking tectonic structures that host talc mineralizations. The origin of Mg and fluids leading to the mineralization is still not answered satisfactorily (Grillo and Prochaska, 2007) and thus a tectonic model for the genesis of the talc deposit is missing. Talc mineralization within UHP pre-Alpine continental crust (Val Chisone, Italy): The talc deposit forms part of the Dora-Maira Massif. Geologicaly the massif derived from a Variscan basement that includes post-Variscan intrusions. The talc mineralization occurs as a sheetlike, conformable body. A possible tectonic emplacement of talc along shear

  13. Development of value-added products from alumina industry mineral wastes using low-temperature-setting phosphate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Wagh, A.S.; Jeong, Seung-Young; Singh, D.

    1996-01-01

    A room-temperature process for stabilizing mineral waste streams has been developed, based on acid-base reaction between MgO and H3PO4 or acid phosphate solution. The resulting waste form sets into a hard ceramic in a few hours. In this way, various alumina industry wastes, such as red mud and treated potliner waste, can be solidified into ceramics which can be used as structural materials in waste management and construction industry. Red mud ceramics made by this process were low-porosity materials ({approx}2 vol%) with a compression strength equal to portland cement concrete (4944 psi). Bonding mechanism appears to be result of reactions of boehmite, goethite, and bayerite with the acid solution, and also encapsulation of red mud particles in Mg phosphate matrix. Possible applications include liners for ponds and thickned tailings disposal, dikes for waste ponds, and grouts. Compatability problems arising at the interface of the liner and the waste are avoided.

  14. A study on non-metallic structure of heliostat

    Energy Technology Data Exchange (ETDEWEB)

    Liu Xiaobin; Zang Chuncheng; Zhang Xiliang; Wang Yangzhong; Du Fengli [Himin Solar Energy Group Co., Ltd, Dezhou City (China); Wang Zhifeng [Inst. of Electrical Engineering, CAS, BJ (China)

    2008-07-01

    Heliostat constitutes a very important component in the solar power tower system. Its importance derives from three aspects: one is the large proportion in the total cost, accounting for about 50% of the whole, the other is its concentration efficiency and reflectivity heavily determining the power conversion from solar thermal energy to electrical energy, another is itself power consumption amount highly expressing failure or success of the power plant. Therefore, serious efforts and considerations from the structure, motion and control mode to material selection have to be given in the design and optimization of heliostat. In the present paper, the mechanical and aging performance of non-metallic materials is investigated and compared. The possibility of these non-metallic materials in the application of heliostat structure is discussed. (orig.)

  15. Numerical analysis of the non-metallic inclusions distribution and separation in a two-strand tundish

    Directory of Open Access Journals (Sweden)

    T. Merder

    2013-04-01

    Full Text Available The tundish plays an important role in the challenging task of a “clean steel” production process. The flow of the liquid steel in tundish has a crucial influence on non-metallic inclusions distribution and separation. The article presents computational studies of non-metallic inclusions separation in a two-strand industrial tundish during steady-state casting. Tundish capacity is 7,5 t. First, flow structure in the tundish was investigated using water model of the industrial tundish in a 1:2 scale. The experimental results, regarding RTD characteristics were used to validate numerical model. With validated model, particle distribution and separation in the two-strand tundish were investigated numerically. For modelling the separation of particles at the fluid surface, a modified boundary condition has been implemented.

  16. Mortality of workers in the man-made mineral fibre industry.

    Science.gov (United States)

    Enterline, P E; Marsh, G M

    1980-01-01

    A cohort, consisting of 7049 males who worked for one year or more as production or maintenance workers during the period 1945-1963 in one of eight US plants producing man-made mineral fibres, was followed for deaths through 1973. Standardized mortality ratios were elevated for major causes of death for men with 20 years or more since first exposure and were high when compared with those of men with less than 20 years since first exposure. None of the excesses was statistically significant. Since many causes of death were involved, the excesses observed are probably unrelated to exposure to man-made mineral fibres. Data for the three mineral wool plants included in the study could not be interpreted due to the possible use of asbestos in one or more of these plants. For the five fibrous glass plants, there was no evidence of an excess in malignant or nonmalignant respiratory disease related to exposure to respirable fibrous glass. Estimated historical respirable fibre concentrations to which workers from fibrous-glass plants were exposed were very low, less than 1/100th of the standard proposed by the US National Institute for Occupational Safety and Health.

  17. Comprehensive Planning for Classification and Disposal of Solid Waste at the Industrial Parks regarding Health and Environmental Impacts

    OpenAIRE

    Hassan Hashemi; Hamidreza Pourzamani; Bahareh Rahmani Samani

    2014-01-01

    The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without o...

  18. Les consommations d'énergie dans l'industrie minérale (résumé Energy Consumption in the Mineral Industry (Summary

    Directory of Open Access Journals (Sweden)

    Gentilhomme P. H.

    2006-11-01

    Full Text Available Dans le cadre limité de cette présentation, il était préférable de placer l'accent, non sur les évaluations du coût énergétique des diverses substances minérales, mais plutôt sur les paramètres de ces coûts, leur évolution récente et leur devenir dans une prospective à moyen terme, questions susceptibles d'alimenter ensuite les discussions. Après un bref rappel méthodologique, seront successivement examinés : - d'un point de vue global, la consommation d'énergie de l'industrie minérale, sa répartition et son évolution par formes d'énergie mises en oeuvre ; - d'un point de vue analytique, la nature des facteurs qui régissent les coûts énergétiques miniers, minéralurgiques et métallurgiques, les tendances récentes constatées et leurs implications pour l'avenir ; - d'un point de vue prospectif, enfin, quelques-uns des remèdes - ou palliatifs ? - à l'élévation des coûts énergétiques des substances minérales. Within the required time for the presentation of this paper, it was more advisable to emphasize, not the sizing up of the energy cost of mineral raw materials and products, but rather the parameters of thes costs, and their evolution, actual and in a medium-term prospective, questions of eventual interest for the discussions. After a short recall of methodology, we have to examine successively: - on a global standpoint, the energy consumption of the mineral industry, the breakdown of this consumption by forms of energy used, and its evolution; - on an analytical standpoint, the main factors which direct the energy requirements in mining, beneficiating and smeltinq operations, the trends that are observed and their results for the future; - on a prospective standpoint, at last, what are the possibilities to cut off - or palliate? - the increase of the mineral commodities energy costs.

  19. Comparison of alkaline industrial wastes for aqueous mineral carbon sequestration through a parallel reactivity study.

    Science.gov (United States)

    Noack, Clinton W; Dzombak, David A; Nakles, David V; Hawthorne, Steven B; Heebink, Loreal V; Dando, Neal; Gershenzon, Michael; Ghosh, Rajat S

    2014-10-01

    Thirty-one alkaline industrial wastes from a wide range of industrial processes were acquired and screened for application in an aqueous carbon sequestration process. The wastes were evaluated for their potential to leach polyvalent cations and base species. Following mixing with a simple sodium bicarbonate solution, chemistries of the aqueous and solid phases were analyzed. Experimental results indicated that the most reactive materials were capable of sequestering between 77% and 93% of the available carbon under experimental conditions in four hours. These materials - cement kiln dust, spray dryer absorber ash, and circulating dry scrubber ash - are thus good candidates for detailed, process-oriented studies. Chemical equilibrium modeling indicated that amorphous calcium carbonate is likely responsible for the observed sequestration. High variability and low reactive fractions render many other materials less attractive for further pursuit without considering preprocessing or activation techniques.

  20. Modernisation of the mineral oil industry in the new Laender; Modernisierung der Mineraloelindustrie in den neuen Bundeslaendern

    Energy Technology Data Exchange (ETDEWEB)

    Schlueter, P. [Mineraloelwirtschaftsverband e.V., Hamburg (Germany)

    1995-09-01

    The structural differences between the energy economies of the two Germanies on the advent of reunification could hardly have been greater. The centralist, planned economy was oriented to autarky and therefore relied heavily on its domestic energy source of brown coal. In 1989 brown coal accounted for 68.4%, hence more than two thirds, of the Democratic Republic`s total primary energy consumption of 128 million t of coal equivalent. Its corresponding share in the old Laender was only 23.5%. In the old Laender mineral oil with a share of 40% represented the prime energy source, whereas in the new Laender it accounted for only 14% of primary energy consumption. However, this small proportion in no way reflects the true significance of the mineral oil industry in the former GDR. (orig.) [Deutsch] Die strukturelle Ausgangslage zum Zeitpunkt der Wiedervereinigung im Energieversorgungsbereich zwischen beiden Teilen Deutschlands konnte unterschiedlicher nicht sein. Die auf Autarkie ausgerichtete Zentralverwaltungswirtschaft setzte auf den einheimischen Energietraeger Braunkohle, der 1989 mit 68,4% am gesamten Primaerenergieverbrauch in Hoehe von 128 Mio. t Steinkohleeinheiten (SKE) mehr als zwei Drittel des Energieverbrauchs stellte, gegenueber 23,5 v. H. in den alten Bundeslaendern. Das Mineraloel, in den alten Bundeslaendern mit 40% Anteil wichtigster Energietraeger, war in den neuen Bundeslaendern lediglich mit knapp 14% am Primaerenergieverbrauch beteiligt. Dieser niedrige Anteil wird der Bedeutung der Mineraloelindustrie in der ehemaligen DDR aber keineswegs gerecht. (orig.)

  1. Non-metallic Inclusions in Continuously Cast Aluminum Killed Steels

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In aluminum killed steels, the size, shape, quantity and formation of non-metallic inclusions in ladle steel (before and after RH vacuum treatment) and in tundish as well as in slabs were studied by EPMA (Electron Probe Microanalysis) and by analyzing the total oxygen. The results showed that in the slabs the total oxygen was quite low and the inclusions discovered were mainly small-sized angular alumina inclusions. This indicates that most inclusions have been removed by floating out during the continuous casting process. In addition, the countermeasures were discussed to decrease the alumina inclusions in the slabs further.

  2. 湖南矿业可持续发展面临的问题及对策%Problems and Solutions Regarding Sustainable Development of Huuan Mineral Industry

    Institute of Scientific and Technical Information of China (English)

    吴爱祥; 张卫锋

    2001-01-01

    通过广泛的调查和研究,对湖南矿业发展中存在的问题进行了较为全面的分析,指出并论证了基于科技创新体系的可持续发展之路是湖南矿业的必然选择。%Through extensive investigation and study, the authors made a deep insight into Hunan' s mineral industry, concluding that sustainable development road based on technical innovation is the only way out for Hunan's mineral industry.

  3. Seamount mineral deposits--A source of rare metals for high technology industries

    Science.gov (United States)

    Hein, James R.; Conrad, Tracey A.; Staudigel, Hubert

    2010-01-01

    The near exponential growth in Earth’s population and the global economy puts increasing constraints on our planet’s finite supply of natural metal resources, and, consequently, there is an increasing need for new sources to supply high-tech industries. To date, effectively all of our raw-metal resources are produced at land-based sites. Except for nearshore placer deposits, the marine environment has been largely excluded from metal mining due to technological difficulties, even though it covers more than 70% of the planet. The case can be made that deep-water seabed mining is inevitable in the future, owing to the critical and strategic metal needs for human society. In this paper, we evaluate the case that seamounts offer significant potential for mining.

  4. Minerals Yearbook, volume I, Metals and Minerals

    Science.gov (United States)

    ,

    2017-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  5. Rapid industrialization and market for energy and minerals:China in the East Asian context

    Institute of Scientific and Technical Information of China (English)

    Ross GARNAUT; SONG Ligang

    2006-01-01

    The mainland of China's rapid pace of industrialization and trade expansion have led many to ask whether its ever-increasing demand for resources can be met without disruption to economic stability and growth in the country and the world as a whole.The article examines the experience of growth in resource demand and the associated pressure on global markets from Japan,Taiwan Province of China and Korea during their periods of sustained,rapid economic growth for periods in the second half of the twentieth century.It seeks to draw lessons for the twenty-first century.The article points out that because of its size the mainland of China may cause the resources boom,associated with the later decades of its period of sustained rapid growth,to raise the prices of resource-intensive products by a large amount,not for a few years,but for several decades.This will have important implications for economic development and the distribution of incomes within and between all countries,and on power relations between states in the Asia-Pacific and throughout the global community.

  6. Seamount mineral deposits: A source of rare metals for high-technology industries

    Science.gov (United States)

    Hein, J.R.; Conrad, T.A.; Staudigel, H.

    2010-01-01

    The near exponential growth in Earth's population and the global economy puts increasing constraints on our planet's finite supply of natural metal resources, and, consequently, there is an increasing need for new sources to supply high-tech industries. To date, effectively all of our raw-metal resources are produced at land-based sites. Except for nearshore placer deposits, the marine environment has been largely excluded from metal mining due to technological difficulties, even though it covers more than 70% of the planet. The case can be made that deep-water seabed mining is inevitable in the future, owing to the critical and strategic metal needs for human society. In this paper, we evaluate the case that seamounts offer significant potential for mining. deposits can be formed in volcanic arc seamounts, no commercially viable deposits have yet been identified in the submarine environment. However, a substantial body of research suggests that hydrogenous Fe-Mn crusts may provide significant resources, especially for "high-tech metals" that are increasingly used in solar cells, computer chips, and hydrogen fuel cells.

  7. The fourteenth international symposium on mine planning and equipment selection (MPES) 2005 and the fifth international conference on computer applications in the minerals industry (CAMI) 2005

    Energy Technology Data Exchange (ETDEWEB)

    Singhal, R.J.; Fytas, K.; Chiwetelu, C. (eds.)

    2005-07-01

    The proceedings contain 122 papers on mine planning, equipment selection, and computer applications in the mining and minerals industry. Presentations cover surface and underground mining, development, coal mining, oil sands mining, risk analysis, productivity, computer modelling, and waste treatment. Selected papers have been abstracted for the Coal Abstracts database.

  8. Osteoarthritis of the knee in coal miners: report by the Industrial Injuries Advisory Council in accordance with Section 171 of the Social Security Administration Act 1992 considering prescription for osteoarthritis of the knee in coal miners

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-08-15

    The report considers prescription for osteoarthritis of the knee in miners. Osteoarthritis of the knee, a common disorder in the general population, was last reviewed by the Council in May 1995 in its Command paper 'Disorders of the Knee' (Cm. 2842). This report follows a representation from an ex-Council member highlighting epidemiological evidence of an increased risk of this disorder in miners. The coal mining industry has undergone many changes which have decreased the extent to which miners have been exposed to such employment conditions, notably the closure of many mines by 1986. However, there is evidence that the relevant exposure circumstances will still have occurred after 1986 in certain categories of miner, such as faceworkers working nonmechanised coal faces.It is recommended that osteoarthritis of the knee should be prescribed in relation to work as an underground miner for ten years or more in aggregate; but that to be reckonable, any service from 1986 onwards should be in certain specific categories of coal mining occupation, as set out in the recommended prescription schedule. 2 apps.

  9. Quantitative Measures of Mineral Supply Risk

    Science.gov (United States)

    Long, K. R.

    2009-12-01

    Almost all metals and many non-metallic minerals are traded internationally. An advantage of global mineral markets is that minerals can be obtained from the globally lowest-cost source. For example, one rare-earth element (REE) mine in China, Bayan Obo, is able to supply most of world demand for rare earth elements at a cost significantly less than its main competitors. Concentration of global supplies at a single mine raises significant political risks, illustrated by China’s recent decision to prohibit the export of some REEs and severely limit the export of others. The expected loss of REE supplies will have a significant impact on the cost and production of important national defense technologies and on alternative energy programs. Hybrid vehicles and wind-turbine generators, for example, require REEs for magnets and batteries. Compact fluorescent light bulbs use REE-based phosphors. These recent events raise the general issue of how to measure the degree of supply risk for internationally sourced minerals. Two factors, concentration of supply and political risk, must first be addressed. Concentration of supply can be measured with standard economic tools for measuring industry concentration, using countries rather than firms as the unit of analysis. There are many measures of political risk available. That of the OECD is a measure of a country’s commitment to rule-of-law and enforcement of contracts, as well as political stability. Combining these measures provides a comparative view of mineral supply risk across commodities and identifies several minerals other than REEs that could suddenly become less available. Combined with an assessment of the impact of a reduction in supply, decision makers can use these measures to prioritize risk reduction efforts.

  10. Interaction of silicene and germanene with non-metallic substrates

    Science.gov (United States)

    Houssa, M.; Scalise, E.; van den Broek, B.; Lu, A.; Pourtois, G.; Afanas'ev, V. V.; Stesmans, A.

    2015-01-01

    By using first-principles simulations, we investigate the interaction of silicene and germanene with various non-metallic substrates. We first consider weak van der Waals interactions between the 2D layers and dichalcogenide substrates, like MoX2 (X=S, Se, Te). The buckling of the silicene or germanene layer is correlated to the lattice mismatch between the 2D material and the MoX2 template. The electronic properties of silicene or germanene on these different templates then largely depend on the buckling of the 2D material layer: highly buckled silicene or germanene on MoS2 are predicted to be metallic, while low buckled silicene on MoTe2 is predicted to be semi-metallic, with preserved Dirac cones at the K points. We next study the covalent bonding of silicene and germanene on (0001) ZnS and ZnSe surfaces. On these substrates, silicene or germanene are found to be semiconducting. Remarkably, the nature and magnitude of their energy band gap can be controlled by an out-of-plane electric field.

  11. Materials damaging and rupture - Volumes 1-2. General remarks, metallic materials. Non-metallic materials and biomaterials, assemblies and industrial problems;Endommagement et rupture des materiaux - Volumes 1-2. Generalites, materiaux metalliques. Materiaux non metalliques et biomateriaux, assemblages et problemes industriels

    Energy Technology Data Exchange (ETDEWEB)

    Clavel, M.; Bompard, P.

    2009-07-01

    The rupture and damaging of materials and structures is almost always and unwanted events which may have catastrophic consequences. Even if the mechanical failure causes can often be analyzed using a thorough knowledge of materials behaviour, the forecasting and prevention of failures remain difficult. While the macroscopic mechanical behaviour is often the result of average effects at the structure or microstructure scale, the damage is very often the result of the combination of load peaks, of localization effects and of microstructure defects. This book, presented in two volumes, takes stock of the state-of-the-art of the knowledge gained in the understanding and modelling of rupture and damaging phenomena of materials and structure, mostly of metallic type. It gives an outline of the available knowledge for other classes of materials (ceramics, biomaterials, geo-materials..) and for different types of applications (aeronautics, nuclear industry). Finally, it examines the delicate problem, but very important in practice, of the behaviour of assemblies. Content: Vol.1 - physical mechanisms of materials damaging and rupture; rupture mechanics; cyclic plasticity and fatigue crack growth; fatigue crack propagation; environment-induced cracking; contacts and surfaces. Vol.2 - glasses and ceramics; natural environments: soils and rocks; mechanical behaviour of biological solid materials: the human bone; contribution of simulation to the understanding of rupture mechanisms; assemblies damaging and rupture; industrial cases (behaviour of PWR pressure vessel steels, and thermal and mechanical stresses in turbojet engines). (J.S.)

  12. Mineral bioprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Torma, A.E.

    1993-05-01

    In the last 25 years, the introduction of biotechnological methods in hydrometallurgy has created new opportunities and challenges for the mineral processing industry. This was especially true for the production of metal values from mining wastes and low-and-complex-grade mineral resources, which were considered economically not amenable for processing by conventional extraction methods. Using bio-assisted heap, dump and in-situ leaching technologies, copper and uranium extractions gained their first industrial applications. The precious metal industries were the next to adopt the bio-preoxidation technique in the extraction of gold from refractory sulfide-bearing ores and concentrates. A variety of other bioleaching opportunities exist for nickel, cobalt, cadmium and zinc sulfide leaching. Recently developed bioremediation methods and biosorption technologies have shown a good potential for industrial applications to remove trace heavy metal and radionuclide concentrations from contaminated soils, and mining and processing effluents.

  13. Selection of leading industries for coal resource cities based on coupling coordination of industry's technological innovation

    Institute of Scientific and Technical Information of China (English)

    Du Jiming; Yu Bo; Yao Xilong

    2012-01-01

    Taking the city of Qitaihe is as an example in order to provide practical methods for the selection of leading industries for coal resource cities,this paper establishes the specific operation scheme for selection of leading industries according to the actual situation of coal resource cities based on the theory of coupling coordination together with the coupling coordination for technological innovation.The results show that the degree for coupling coordination of the technological innovation for each alternative industry differentiates with the development of coal resource cities.For example,the average degree of food processing industry from agricultural produce is 0.9.Therefore,coal resource cities should develop some industries related to coal industry,such as coking industry,some chemical and medicines industry and non-metallic mineral products manufacturing,in the near future,however,some industries with greater market and influence potentials and low carbon emissions should be attached much importance to in the future.

  14. The relationship between the bone mineral density and urinary cadmium concentration of residents in an industrial complex

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Minah; Paek, Domyung [Institute of Health and Environment, Department of Environmental Health, School of Public Health, Seoul National University, Gwanak-599, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Yoon, Chungsik, E-mail: csyoon@snu.ac.kr [Institute of Health and Environment, Department of Environmental Health, School of Public Health, Seoul National University, Gwanak-599, Gwanak-gu, Seoul 151-742 (Korea, Republic of)

    2011-01-15

    Background: An association between cadmium exposure and bone mineral density (BMD) has been demonstrated in elderly women, but has not been well studied in youths and men. Some studies report either no or a weak association between cadmium exposure and bone damage. Objectives: This study was designed to investigate the relationship between the urinary cadmium (U-Cd) levels and BMD of females and males of all ages. Methods: A total of 804 residents near an industrial complex were surveyed in 2007. U-Cd and BMD on the heel (non-dominant calcaneus) were analyzed with AAS-GTA and Dual-Energy X-ray absorptiometry, respectively. Demographic characteristics were collected by structured questionnaires. Osteoporosis and osteopenia were defined by BMD cut-off values and T-scores set by the WHO; T score>-1, normal; -2.5=}1.0 {mu}g/g creatinine) in females (OR=2.92; 95% CI, 1.51-5.64) and in males (OR=3.37; 95% CI, 1.09-10.38). With the multiple linear regression model, the BMD of the adult group was negatively associated with U-Cd (<0.05), gender (female, p<0.001) and age (p<0.001). The BMD of participants who were {<=}19 years of age was negatively associated with gender (female, p<0.01), whereas it was positively associated with age and BMI (p<0.001). BMD was not associated with exercise, smoking habits, alcohol consumption, job or parental education. Conclusion: Results suggested that U-Cd might be associated with osteopenia as well as osteoporosis in both male and female adults. Age and female gender were negatively associated with BMD in the adult group, whereas age was positively

  15. Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity

    Directory of Open Access Journals (Sweden)

    Shubrajit Bhaumik

    2014-01-01

    Full Text Available The paper investigates the exceptional antiwear and extreme pressure properties of multiwalled carbon nanotube based mineral oil. Different samples of oil containing varying proportions of MWNT (MWNT and graphite were prepared. The samples were tested for their antiwear and load bearing capacity according to ASTM G99 and ASTM D-2783 standards. After pass load test in four ball tester the rubbed surfaces were investigated with Scanning Electron Microscope (SEM images. The wear test results show a decrease wear by 70–75% in case of multiwalled nanotube based mineral oil as compared with pure mineral oil. Furthermore, it has been observed that the load bearing capacity in case of multiwalled carbon nanotube based mineral oil increases by 20% as compared to pure mineral oil. A comparison in the antiwear and load bearing capacity properties of graphite and nanotube based mineral oil was studied which showed the inefficiency of graphite based lubricant over MWNT based oil. Thus, the finding would be helpful in developing new nanoparticle based lubricants.

  16. Characteristics and Modification of Non-metallic Inclusions in Titanium-Stabilized AISI 409 Ferritic Stainless Steel

    Science.gov (United States)

    Kruger, Dirk; Garbers-Craig, Andrie

    2017-06-01

    This study describes an investigation into the improvement of castability, final surface quality and formability of titanium-stabilized AISI 409 ferritic stainless steel on an industrial scale. Non-metallic inclusions found in this industrially produced stainless steel were first characterized using SEM-EDS analyses through the INCA-Steel software platform. Inclusions were found to consist of a MgO·Al2O3 spinel core, which acted as heterogeneous nucleation site for titanium solubility products. Plant-scale experiments were conducted to either prevent the formation of spinel, or to modify it by calcium treatment. Modification to spherical dual-phase spinel-liquid matrix inclusions was achieved with calcium addition, which eliminated submerged entry nozzle clogging for this grade. Complete modification to homogeneous liquid calcium aluminates was achieved at high levels of dissolved aluminum. A mechanism was suggested to explain the extent of modification achieved.

  17. Characteristics and Modification of Non-metallic Inclusions in Titanium-Stabilized AISI 409 Ferritic Stainless Steel

    Science.gov (United States)

    Kruger, Dirk; Garbers-Craig, Andrie

    2017-02-01

    This study describes an investigation into the improvement of castability, final surface quality and formability of titanium-stabilized AISI 409 ferritic stainless steel on an industrial scale. Non-metallic inclusions found in this industrially produced stainless steel were first characterized using SEM-EDS analyses through the INCA-Steel software platform. Inclusions were found to consist of a MgO·Al2O3 spinel core, which acted as heterogeneous nucleation site for titanium solubility products. Plant-scale experiments were conducted to either prevent the formation of spinel, or to modify it by calcium treatment. Modification to spherical dual-phase spinel-liquid matrix inclusions was achieved with calcium addition, which eliminated submerged entry nozzle clogging for this grade. Complete modification to homogeneous liquid calcium aluminates was achieved at high levels of dissolved aluminum. A mechanism was suggested to explain the extent of modification achieved.

  18. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

    Science.gov (United States)

    Grady, Joseph E.

    2015-01-01

    The Non-Metallic Gas Turbine Engine project, funded by NASA Aeronautics Research Institute, represents the first comprehensive evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. This will be achieved by assessing the feasibility of using additive manufacturing technologies to fabricate polymer matrix composite and ceramic matrix composite turbine engine components. The benefits include: 50 weight reduction compared to metallic parts, reduced manufacturing costs, reduced part count and rapid design iterations. Two high payoff metallic components have been identified for replacement with PMCs and will be fabricated using fused deposition modeling (FDM) with high temperature polymer filaments. The CMC effort uses a binder jet process to fabricate silicon carbide test coupons and demonstration articles. Microstructural analysis and mechanical testing will be conducted on the PMC and CMC materials. System studies will assess the benefits of fully nonmetallic gas turbine engine in terms of fuel burn, emissions, reduction of part count, and cost. The research project includes a multidisciplinary, multiorganization NASA - industry team that includes experts in ceramic materials and CMCs, polymers and PMCs, structural engineering, additive manufacturing, engine design and analysis, and system analysis.

  19. Non-Metallic Inclusions and Hot-Working Behaviour of Advanced High-Strength Medium-Mn Steels

    Directory of Open Access Journals (Sweden)

    Grajcar A.

    2016-06-01

    Full Text Available The work addresses the production of medium-Mn steels with an increased Al content. The special attention is focused on the identification of non-metallic inclusions and their modification using rare earth elements. The conditions of the thermomechanical treatment using the metallurgical Gleeble simulator and the semi-industrial hot rolling line were designed for steels containing 3 and 5% Mn. Hot-working conditions and controlled cooling strategies with the isothermal holding of steel at 400°C were selected. The effect of Mn content on the hot-working behaviour and microstructure of steel was addressed. The force-energetic parameters of hot rolling were determined. The identification of structural constituents was performed using light microscopy and scanning electron microscopy methods. The addition of rare earth elements led to the total modification of non-metallic inclusions, i.e., they replaced Mn and Al forming complex oxysulphides. The Mn content in a range between 3 and 5% does not affect the inclusion type and the hot-working behaviour. In contrast, it was found that Mn has a significant effect on a microstructure.

  20. The Effect of Different Non-Metallic Inclusions on the Machinability of Steel

    OpenAIRE

    Niclas Ånmark; Andrey Karasev; Pär Göran Jönsson

    2015-01-01

    Considerable research has been conducted over recent decades on the role of non-metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, ...

  1. Compilation of geospatial data for the mineral industries and related infrastructure of Latin America and the Caribbean

    Science.gov (United States)

    Baker, Michael S.; Buteyn, Spencer D.; Freeman, Philip A.; Trippi, Michael H.; Trimmer III, Loyd M.

    2017-07-31

    This report describes the U.S. Geological Survey’s (USGS) ongoing commitment to its mission of understanding the nature and distribution of global mineral commodity supply chains by updating and publishing the georeferenced locations of mineral commodity production and processing facilities, mineral exploration and development sites, and mineral commodity exporting ports in Latin America and the Caribbean. The report includes an overview of data sources and an explanation of the geospatial PDF map format.The geodatabase and geospatial data layers described in this report create a new geographic information product in the form of a geospatial portable document format (PDF) map. The geodatabase contains additional data layers from USGS, foreign governmental, and open-source sources as follows: (1) coal occurrence areas, (2) electric power generating facilities, (3) electric power transmission lines, (4) hydrocarbon resource cumulative production data, (5) liquefied natural gas terminals, (6) oil and gas concession leasing areas, (7) oil and gas field center points, (8) oil and gas pipelines, (9) USGS petroleum provinces, (10) railroads, (11) recoverable proven plus probable hydrocarbon resources, (12) major cities, (13) major rivers, and (14) undiscovered porphyry copper tracts.

  2. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  3. Modification of Non-Metallic Inclusions by Rare-Earth Elements in Microalloyed Steels

    Directory of Open Access Journals (Sweden)

    M. Opiela

    2012-04-01

    Full Text Available The modification of the chemical composition of non-metallic inclusions by rare-earth elements in the new-developed microalloyed steels was discussed in the paper. The investigated steels are assigned to production of forged elements by thermo- mechanical treatment. The steels were melted in a vaccum induction furnace and modification of non-metallic inclusions was carried out by the michmetal in the amount of 2.0 g per 1 kg of steel. It was found that using material charge of high purity and a realization of metallurgical process in vacuous conditions result in a low concentration of sulfur (0.004%, phosphorus (from 0.006 to 0.008% and oxygen (6 ppm. The high metallurgical purity is confirmed by a small fraction of non-metallic inclusions averaging 0.075%. A large majority of non-metallic inclusions are fine, globular oxide-sulfide or sulfide particles with a mean size 17m2. The chemical composition and morphology of non-metallic inclusions was modified by Ce, La and Nd, what results a small deformability of non- metallic inclusions during hot-working.

  4. Exposure to diesel exhaust linked to lung cancer in miners

    Science.gov (United States)

    In a study of non-metal miners in the United States, federal government scientists reported that heavy exposure to diesel exhaust increased risk of death from lung cancer. The research, all part of the Diesel Exhaust in Miners Study, was designed to evalu

  5. Industrialization

    African Journals Online (AJOL)

    Lucy

    Second World era international system (1945-1990) may not have done any good to ... wedge between the capitalist and socialist blocs, not only blurred Third World .... Politics and the Stages of Economic Growth, Cambridge: Cambridge ... complex industries producing mainly for export, but also producing for local.

  6. Mineral commodity summaries 2017

    Science.gov (United States)

    Ober, Joyce A.

    2017-01-31

    This report is the earliest Government publication to furnish estimates covering 2016 nonfuel mineral industry data. Data sheets contain information on the domestic industry structure, Government programs, tariffs, and 5-year salient statistics for more than 90 individual minerals and materials.

  7. Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity

    OpenAIRE

    Shubrajit Bhaumik; Prabhu, S.; Kingsly Jeba Singh

    2014-01-01

    The paper investigates the exceptional antiwear and extreme pressure properties of multiwalled carbon nanotube based mineral oil. Different samples of oil containing varying proportions of MWNT (MWNT) and graphite were prepared. The samples were tested for their antiwear and load bearing capacity according to ASTM G99 and ASTM D-2783 standards. After pass load test in four ball tester the rubbed surfaces were investigated with Scanning Electron Microscope (SEM) images. The wear test results s...

  8. Non-metal doped TiO2 nanotube arrays for high efficiency photocatalytic decomposition of organic species in water

    Science.gov (United States)

    Szkoda, Mariusz; Siuzdak, Katarzyna; Lisowska-Oleksiak, Anna

    2016-10-01

    Titanium dioxide is a well-known photoactive semiconductor with a variety of possible applications. The procedure of pollutant degradation is mainly performed using TiO2 powder suspension. It can also be exploited an immobilized catalyst on a solid support. Morphology and chemical doping have a great influence on TiO2 activity under illumination. Here we compare photoactivity of titania nanotube arrays doped with non-metal atoms: nitrogen, iodine and boron applied for photodegradation of organic dye - methylene blue and terephtalic acid. The doped samples act as a much better photocatalyst in the degradation process of methylene blue and lead to the formation of much higher amount of hydroxyl radicals (•OH) than undoped TiO2 nanotube arrays. The use of a catalyst active under solar light illumination in the form of thin films on a stable substrate can be scaled up for an industrial application.

  9. A Fully Non-metallic Gas Turbine Engine Enabled by Additive Manufacturing

    Science.gov (United States)

    Grady, Joseph E.

    2014-01-01

    The Non-Metallic Gas Turbine Engine project, funded by NASA Aeronautics Research Institute (NARI), represents the first comprehensive evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. This will be achieved by assessing the feasibility of using additive manufacturing technologies for fabricating polymer matrix composite (PMC) and ceramic matrix composite (CMC) gas turbine engine components. The benefits of the proposed effort include: 50 weight reduction compared to metallic parts, reduced manufacturing costs due to less machining and no tooling requirements, reduced part count due to net shape single component fabrication, and rapid design change and production iterations. Two high payoff metallic components have been identified for replacement with PMCs and will be fabricated using fused deposition modeling (FDM) with high temperature capable polymer filaments. The first component is an acoustic panel treatment with a honeycomb structure with an integrated back sheet and perforated front sheet. The second component is a compressor inlet guide vane. The CMC effort, which is starting at a lower technology readiness level, will use a binder jet process to fabricate silicon carbide test coupons and demonstration articles. The polymer and ceramic additive manufacturing efforts will advance from monolithic materials toward silicon carbide and carbon fiber reinforced composites for improved properties. Microstructural analysis and mechanical testing will be conducted on the PMC and CMC materials. System studies will assess the benefits of fully nonmetallic gas turbine engine in terms of fuel burn, emissions, reduction of part count, and cost. The proposed effort will be focused on a small 7000 lbf gas turbine engine. However, the concepts are equally applicable to large gas turbine engines. The proposed effort includes a multidisciplinary, multiorganization NASA - industry team that includes experts in

  10. Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): a review.

    Science.gov (United States)

    Wang, Ruixue; Xu, Zhenming

    2014-08-01

    The world's waste electrical and electronic equipment (WEEE) consumption has increased incredibly in recent decades, which have drawn much attention from the public. However, the major economic driving force for recycling of WEEE is the value of the metallic fractions (MFs). The non-metallic fractions (NMFs), which take up a large proportion of E-wastes, were treated by incineration or landfill in the past. NMFs from WEEE contain heavy metals, brominated flame retardant (BFRs) and other toxic and hazardous substances. Combustion as well as landfill may cause serious environmental problems. Therefore, research on resource reutilization and safe disposal of the NMFs from WEEE has a great significance from the viewpoint of environmental protection. Among the enormous variety of NMFs from WEEE, some of them are quite easy to recycle while others are difficult, such as plastics, glass and NMFs from waste printed circuit boards (WPCBs). In this paper, we mainly focus on the intractable NMFs from WEEE. Methods and technologies of recycling the two types of NMFs from WEEE, plastics, glass are reviewed in this paper. For WEEE plastics, the pyrolysis technology has the lowest energy consumption and the pyrolysis oil could be obtained, but the containing of BFRs makes the pyrolysis recycling process problematic. Supercritical fluids (SCF) and gasification technology have a potentially smaller environmental impact than pyrolysis process, but the energy consumption is higher. With regard to WEEE glass, lead removing is requisite before the reutilization of the cathode ray tube (CRT) funnel glass, and the recycling of liquid crystal display (LCD) glass is economically viable for the containing of precious metals (indium and tin). However, the environmental assessment of the recycling process is essential and important before the industrialized production stage. For example, noise and dust should be evaluated during the glass cutting process. This study could contribute

  11. International seminar on mineral sector in India: need and scope of development under new economic policy of globalisation and technology upgradation

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    A total of 58 papers were presented at the seminar in five sessions with the following headings: Indian mineral policy; exploration - present status and advances in techniques and their application in India; state of the art mining technology in coal, metallic and non-metallic sectors and its application in India, including small mines, through foreign collaborations and environmentally harmonious technological upgradation; advancement in beneficiation technique in mineral sector - economic exploitation of leaner deposits - adoption of appropriate technologies through collaborations and foreign participation; and future outlook for minerals-based industries: concentrates, metals, alloys - outlook for collaborations, joint ventures and foreign participations for augmenting value-added exports. 13 resource papers were also discussed. 25 of the papers have been abstracted separately.

  12. Synthesis and Catalytic Applications of Non-Metal Doped Mesoporous Titania

    Directory of Open Access Journals (Sweden)

    Syed Z. Islam

    2017-03-01

    Full Text Available Mesoporous titania (mp-TiO2 has drawn tremendous attention for a diverse set of applications due to its high surface area, interfacial structure, and tunable combination of pore size, pore orientation, wall thickness, and pore connectivity. Its pore structure facilitates rapid diffusion of reactants and charge carriers to the photocatalytically active interface of TiO2. However, because the large band gap of TiO2 limits its ability to utilize visible light, non-metal doping has been extensively studied to tune the energy levels of TiO2. While first-principles calculations support the efficacy of this approach, it is challenging to efficiently introduce active non-metal dopants into the lattice of TiO2. This review surveys recent advances in the preparation of mp-TiO2 and their doping with non-metal atoms. Different doping strategies and dopant sources are discussed. Further, co-doping with combinations of non-metal dopants are discussed as strategies to reduce the band gap, improve photogenerated charge separation, and enhance visible light absorption. The improvements resulting from each doping strategy are discussed in light of potential changes in mesoporous architecture, dopant composition and chemical state, extent of band gap reduction, and improvement in photocatalytic activities. Finally, potential applications of non-metal-doped mp-TiO2 are explored in water splitting, CO2 reduction, and environmental remediation with visible light.

  13. Fatigue Strength Prediction of Drilling Materials Based on the Maximum Non-metallic Inclusion Size

    Science.gov (United States)

    Zeng, Dezhi; Tian, Gang; Liu, Fei; Shi, Taihe; Zhang, Zhi; Hu, Junying; Liu, Wanying; Ouyang, Zhiying

    2015-12-01

    In this paper, the statistics of the size distribution of non-metallic inclusions in five drilling materials were performed. Based on the maximum non-metallic inclusion size, the fatigue strength of the drilling material was predicted. The sizes of non-metallic inclusions in drilling materials were observed to follow the inclusion size distribution rule. Then the maximum inclusion size in the fatigue specimens was deduced. According to the prediction equation of the maximum inclusion size and fatigue strength proposed by Murakami, fatigue strength of drilling materials was obtained. Moreover, fatigue strength was also measured through rotating bending tests. The predicted fatigue strength was significantly lower than the measured one. Therefore, according to the comparison results, the coefficients in the prediction equation were revised. The revised equation allowed the satisfactory prediction results of fatigue strength of drilling materials at the fatigue life of 107 rotations and could be used in the fast prediction of fatigue strength of drilling materials.

  14. Modelling of non-metallic particles motion process in foundry alloys

    Directory of Open Access Journals (Sweden)

    P. L. Żak

    2015-04-01

    Full Text Available The behaviour of non-metallic particles in the selected composites was analysed, in the current study. The calculations of particles floating in liquids differing in viscosity were performed. Simulations based on the Stokes equation were made for spherical SiC particles and additionally the particle size influence on Reynolds number was analysed.The movement of the particles in the liquid metal matrix is strictly connected with the agglomerate formation problem.Some of collisions between non-metallic particles lead to a permanent connection between them. Creation of the two spherical particles and a metallic phase system generates the adhesion force. It was found that the adhesion force mainly depends on the surface tension of the liquid alloy and radius of non-metallic particles.

  15. The Effect of Different Non-Metallic Inclusions on the Machinability of Steels.

    Science.gov (United States)

    Ånmark, Niclas; Karasev, Andrey; Jönsson, Pär Göran

    2015-02-16

    Considerable research has been conducted over recent decades on the role of non‑metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, etc.) are discussed and summarized. Finally, some methods for modification of non-metallic inclusions in the liquid steel are considered to obtain a desired balance between mechanical properties and machinability of various steel grades.

  16. Modification of Non-Metallic Inclusions by Rare-Earth Elements in Microalloyed Steels

    OpenAIRE

    Opiela M.; Grajcar A.

    2012-01-01

    The modification of the chemical composition of non-metallic inclusions by rare-earth elements in the new-developed microalloyed steels was discussed in the paper. The investigated steels are assigned to production of forged elements by thermo- mechanical treatment. The steels were melted in a vaccum induction furnace and modification of non-metallic inclusions was carried out by the michmetal in the amount of 2.0 g per 1 kg of steel. It was found that using material charge of high purity and...

  17. The Effect of Different Non-Metallic Inclusions on the Machinability of Steels

    Directory of Open Access Journals (Sweden)

    Niclas Ånmark

    2015-02-01

    Full Text Available Considerable research has been conducted over recent decades on the role of non‑metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, etc. are discussed and summarized. Finally, some methods for modification of non-metallic inclusions in the liquid steel are considered to obtain a desired balance between mechanical properties and machinability of various steel grades.

  18. Question of development of industrial chemistry of combustible minerals (from a conference on problems in development of oil chemistry and chemical engineering)

    Energy Technology Data Exchange (ETDEWEB)

    Semenov, L.V.

    1986-04-01

    In conjunction with other scientific associations, the Department of General and Industrial Chemistry in the Soviet Academy of Sciences organized a conference in Zvenigorod in October 1985 which was devoted to the chemistry of coal, shale and oil. A series of papers were presented on the future of hydrogenation catalysis as an cost-effective method of processing coking products, coals, shaley resin, fuel oil and bituminous oil to produce synthetic liquids. Subjects included: the prospects of non-traditional methods of processing solid combustible minerals; heavy catalysis of oil residue and bituminous oils; the current state of coal chemistry in Kuzbass, new methods of coal classification and the production of liquid and chemical products from combustible shale.

  19. Effect of Acid-Soluble Aluminum on the Evolution of Non-metallic Inclusions in Spring Steel

    Science.gov (United States)

    Wang, Yong; Tang, Haiyan; Wu, Tuo; Wu, Guanghui; Li, Jingshe

    2017-04-01

    The content of acidic soluble aluminum in molten steel ([Al]s) is of significance to the control of total oxygen (TO), the formation of non-metallic inclusions, and the improvement of the surface quality of billets. Industrial trials and thermodynamic calculations were performed to study the effects of [Al]s content on the TO and the evolution of non-metallic inclusions in 60Si2Mn-Cr spring steel that was deoxidized by Si-Mn ((low aluminum process (LAP)) and Si-Mn-Al (high aluminum process (HAP)). The results show that the [Al]s contents in billets are within 0.0060 to 0.0069 mass pct in the LAP and 0.016 to 0.055 mass pct in the HAP. The TO content at each station of the LAP is higher than that in the HAP; the inclusions of billets were mainly of the CaO-Al2O3-SiO2 type in the former, and of the CaO-Al2O3-MgO and CaS-Al2O3-MgO types in the latter. A tendency is found that the higher the [Al]s, the easier it is to deviate from the low melting point region of the inclusion distribution and the larger the size of the inclusions. The relationships between [Al]s and the melting point of the oxide inclusions and the Al2O3 content in the oxide inclusions are also discussed in terms of experiment and calculation.

  20. 废弃电路板中非金属组分的回收利用%Recycling of non-metallic fractions from waste printed circuit boards

    Institute of Scientific and Technical Information of China (English)

    刘旸; 刘静欣; 江晓健; 郭学益

    2016-01-01

    废弃电路板是电子废弃物的重要组成部分。目前工业生产及工艺开发多针对极具经济回收价值的电路板金属组分。然而,占电路板质量分数70%的非金属组分却关注较少。文章分析了废弃电路板非金属组分的组成及其有害组分,其含有树脂及玻璃纤维等有价成分和溴、夹杂重金属等污染环境的物质,其回收利用对于资源循环利用及环境保护均有重要意义。非金属组分回收利用主要有物理处理和化学处理2种技术:物理处理技术主要将非金属组分用作结构材料填料、塑料改性剂和建筑材料改性剂;化学处理技术通过焚烧将非金属组分用作燃料和熔剂或通过热解回收或溶剂分解回收可将非金属组分转化为化工产品。这2种技术在非金属组分资源化利用上各有优势,都已有部分工业化应用。%Waste printed circuit boards (WPCBs) are important parts in the electronic waste. Nowadays, recov-ering metals from WPCBs are developed but non-metallic fractions which accounts for 70% of waste printed circuit boards have not been effectively utilized. The non-metallic fractions and hazards in waste printed cir-cuit boards were analyzed in this paper. The results show that resins and glass fiber in non-metallic fractions can be recycled and bromine and heavy metals could pollute environment. Recovering non-metallic fractions are important to recycling and environment, which can be divided into physical recycling technology and chemical recycling technology, with the formal using non-metallic fractions as the filler materials, plastic modifier or building material modifiers, and the latter using non-metallic fractions as the fuel and smelting flux through incineration or convert non-metallic fractions into chemical products through pyrolysis or solvent decomposition. Both technologies have their own advantages in resource utilization of non-metallic fractions, and partly

  1. Stepped-Frequency Ground-Penetrating Radar for Detection of Small Non-metallic Buried Objects

    DEFF Research Database (Denmark)

    Jakobsen, Kaj Bjarne; Sørensen, Helge Bjarup Dissing; Nymann, Ole

    1997-01-01

    A monostatic amplitude and phase stepped-frequency radar approach have been proposed to detect small non-metallic buried anti-personnel (AP) mines. An M-56 AP-mine with a diameter of 54 mm and height of 40 mm, only, has been successfully detected and located in addition to small metallic mine...

  2. Soil effects on GPR detection of buried non-metallic mines

    NARCIS (Netherlands)

    Hendrickx, J.M.H.; Hong, S.H.; Miller, T.; Borchers, B.; Rhebergen, J.B.

    2003-01-01

    Landmines are a major problem in many areas of the world. In spite of the fact that many different types of landmine sensors have been developed, the detection of non-metallic landmines remains very difficult. The objective of this contribution is to synthesize our work related to the effects of soi

  3. The Measurement of Hardness and Elastic Modulus of non-Metallic Inclusions in Steely Welding Joints

    Directory of Open Access Journals (Sweden)

    Ignatova Anna

    2015-08-01

    Full Text Available Trunk pipelines work under a cyclic dynamical mechanical load because when oil or gas is pumped, the pressure constantly changes - pulsates. Therefore, the fatigue phenomenon is a common reason of accidents. The fatigue phenomenon more often happens in the zone of non-metallic inclusions concentration. To know how the characteristics of nonmetallic inclusions influence the probability of an accident the most modern research methods should be used. It is determined with the help of the modern research methods that the accident rate of welded joints of pipelines is mostly influenced by their morphological type, composition and size of nonmetallic inclusions, this effect is more important than the common level of pollution by non-metallic inclusions. The article presents the results of the investigations of welded joints, obtained after the use of different common welding materials. We used the methods, described in the state standards: scanning electronic microscopy, spectral microprobe analysis and nano-indentation. We found out that non-metallic inclusions act like stress concentrators because they shrink, forming a blank space between metal and nonmetallic inclusions; it strengthens the differential properties on this boundary. Nonmetallic inclusion is not fixed, it can move. The data that we have received mean that during welded joints’ contamination (with non-metallic inclusions monitoring process, more attention should be paid to the content of definite inclusions, but not to total contamination.

  4. Preliminary Mineral Resource Assessment of Selected Mineral Deposit Types in Afghanistan

    Science.gov (United States)

    Ludington, Steve; Orris, Greta J.; Bolm, Karen S.; Peters, Stephen G.; ,

    2007-01-01

    INTRODUCTION Wise decision-making and management of natural resources depend upon credible and reliable scientific information about the occurrence, distribution, quantity and quality of a country's resource base. Economic development decisions by governments require such information to be part of a Mineral Resource Assessment. Such Mineral Assessments are also useful to private citizens and international investors, consultants, and companies prior to entry and investment in a country. Assessments can also be used to help evaluate the economic risks and impact on the natural environment associated with development of resources. In February 2002, at the request of the Department of State and the then U.S. Ambassador to Afghanistan (Robert P. Finn), the U.S. Geological Survey (USGS) prepared a detailed proposal addressing natural resources issues critical to the reconstruction of Afghanistan. The proposal was refined and updated in December 2003 and was presented as a 5-year work plan to USAID-Kabul in February 2004. USAID-Kabul currently funds this plan and this report presents a part of the preliminary results obligated for fiscal year 2006. A final Preliminary Assessment of the Non Fuel Mineral Resource of Afghanistan will be completed and delivered at the end of fiscal year 2007. Afghanistan has abundant metallic and non-metallic resources, but the potential resources have never been systematically assessed using modern methods. Much of the existing mineral information for Afghanistan was gathered during the 1950s and continued in the late 1980s until the departure of the geologic advisors from the Soviet Union. During this period, there were many mineral-related activities centered on systematic geologic mapping of the country, collection of geochemical and rock samples, implementation of airborne geophysical surveys, and exploration focused on the discovery of large mineral deposits. Many reports, maps, charts, and tables were produced at that time. Some of

  5. Environmental sustainability of the solar photo-Fenton process for wastewater treatment and pharmaceuticals mineralization at semi-industrial scale.

    Science.gov (United States)

    Foteinis, Spyros; Monteagudo, Jose Maria; Durán, Antonio; Chatzisymeon, Efthalia

    2017-08-31

    The environmental sustainability of a semi-industrial solar photo-Fenton reactor, treating real effluents emanating from a pharmaceutical laboratory, is assessed herein. The life cycle assessment/analysis (LCA) methodology was employed and real life cycle inventory (LCI) data was collected from a ferrioxalate-assisted homogeneous solar photo-Fenton wastewater treatment plant (WWTP), at Ciudad Real, Spain. Electricity was provided by photovoltaic (PV) panels in tandem with a battery bank, making the plant autonomous from the local grid. The effective treatment of 1m(3) of secondary-treated pharmaceutical wastewater, containing antipyrine, was used as a functional unit. The main environmental hotspot was identified to be the chemical reagents used to enhance treatment efficiency, mainly hydrogen peroxide (H2O2) and to a smaller degree oxalic acid. On the other hand, land use, PV panels, battery units, compound parabolic collectors (CPC), tanks, pipes and pumps, as materials, had a low contribution, ranging from as little as 0.06% up to about 2% on the total CO2eq emissions. Overall, the solar photo-Fenton process was found to be a sustainable technology for treating wastewater containing micropollutants at semi-industrial level, since the total environmental footprint was found to be 2.71kgCO2m(-3) or 272mPtm(-3), using IPCC 2013 and ReCiPe impact assessment methods, respectively. A sensitivity analysis revealed that if the excess of solar power is fed back into the grid then the total environmental footprint is reduced. Depending on the amount of solar power fed back into the grid the process could have a near zero total environmental footprint. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): A review

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ruixue; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

    2014-08-15

    Highlights: • NMFs from WEEE were treated by incineration or land filling in the past. • Environmental risks such as heavy metals and BFRs will be the major problems during the NMFs recycling processes. • Methods and technologies of recycling the two types of NMFs from WEEE, plastics, glasses are reviewed. • More environmental impact assessment should be carried out to evaluate the environmental risks of the recycling products. - Abstract: The world’s waste electrical and electronic equipment (WEEE) consumption has increased incredibly in recent decades, which have drawn much attention from the public. However, the major economic driving force for recycling of WEEE is the value of the metallic fractions (MFs). The non-metallic fractions (NMFs), which take up a large proportion of E-wastes, were treated by incineration or landfill in the past. NMFs from WEEE contain heavy metals, brominated flame retardant (BFRs) and other toxic and hazardous substances. Combustion as well as landfill may cause serious environmental problems. Therefore, research on resource reutilization and safe disposal of the NMFs from WEEE has a great significance from the viewpoint of environmental protection. Among the enormous variety of NMFs from WEEE, some of them are quite easy to recycle while others are difficult, such as plastics, glass and NMFs from waste printed circuit boards (WPCBs). In this paper, we mainly focus on the intractable NMFs from WEEE. Methods and technologies of recycling the two types of NMFs from WEEE, plastics, glass are reviewed in this paper. For WEEE plastics, the pyrolysis technology has the lowest energy consumption and the pyrolysis oil could be obtained, but the containing of BFRs makes the pyrolysis recycling process problematic. Supercritical fluids (SCF) and gasification technology have a potentially smaller environmental impact than pyrolysis process, but the energy consumption is higher. With regard to WEEE glass, lead removing is requisite

  7. The mineral economy of Brazil--Economia mineral do Brasil

    Science.gov (United States)

    Gurmendi, Alfredo C.; Barboza, Frederico Lopes; Thorman, Charles H.

    1999-01-01

    This study depicts the Brazilian government structure, mineral legislation and investment policy, taxation, foreign investment policies, environmental laws and regulations, and conditions in which the mineral industry operates. The report underlines Brazil's large and diversified mineral endowment. A total of 37 mineral commodities, or groups of closely related commodities, is discussed. An overview of the geologic setting of the major mineral deposits is presented. This report is presented in English and Portuguese in pdf format.

  8. The rate of the productivity of human resources, capital, and energy in sub-sectors of industry during 1991-2011

    Directory of Open Access Journals (Sweden)

    Morteza Parandakh

    2015-12-01

    Full Text Available This study estimated the rate of productivity of human resources, capital, and energy (electricity in a selection of sub-sectors of industry (basic metals, chemicals, non-metallic minerals, rubber and plastic products, and food products during 1991-2011 using the econometric methods. For this purpose, first, the amount of the stability of the model's variables in time series was tested. Then, the existence of co-integration between them was determined and, finally, the productivity of the model was calculated using ARDL. According to the results, the elasticity of labor force, capital and energy were 1.07, 1.47 and -0.23, respectively.

  9. The relationship between various exposure metrics for elongate mineral particles (EMP) in the taconite mining and processing industry.

    Science.gov (United States)

    Hwang, Jooyeon; Ramachandran, Gurumurthy; Raynor, Peter C; Alexander, Bruce H; Mandel, Jeffrey H

    2014-01-01

    Different dimensions of elongate mineral particles (EMP) have been proposed as being relevant to respiratory health end-points such as mesothelioma and lung cancer. In this article, a methodology for converting personal EMP exposures measured using the National Institute for Occupational Safety and Health (NIOSH) 7400/7402 methods to exposures based on other size-based definitions has been proposed and illustrated. Area monitoring for EMP in the taconite mines in Minnesota's Mesabi Iron Range was conducted using a Micro Orifice Uniform Deposit Impactor (MOUDI) size-fractionating sampler. EMP on stages of the MOUDI were counted and sized according to each EMP definition using an indirect-transfer transmission electron microscopy (ISO Method 13794). EMP were identified using energy-dispersive x-ray and electron diffraction analysis. Conversion factors between the EMP counts based on different definitions were estimated using (1) a linear regression model across all locations and (2) a location-specific ratio of the count based on each EMP definition to the NIOSH 7400/7402 count. The highest fractions of EMP concentrations were found for EMP that were 1-3 μm in length and 0.2-0.5 μm in width. Therefore, the current standard NIOSH Method 7400, which only counts EMP >5 μm in length and ≥ 3 in aspect ratio, may underestimate amphibole EMP exposures. At the same time, there was a high degree of correlation between the exposures estimated according to the different size-based metrics. Therefore, the various dimensional definitions probably do not result in different dose-response relationships in epidemiological analyses. Given the high degree of correlation between the various metrics, a result consistent with prior research, a more reasonable metric might be the measurement of all EMP irrespective of size. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the

  10. Minerals From the Marine Environment

    Science.gov (United States)

    Cruickshank, Michael J.

    The current interest in minerals centering on, among other things, potential shortages, long-term needs, and deep seabed nodules, accentuates the usefulness and timeliness of this little book authored by a former chairman of the British National Environmental Research Council.In less than 100 pages, the author puts into perspective the potential for producing minerals from offshore areas of the world. After introducing the reader to the ocean environment and the extraordinary variety of the nature of the seabed, the author describes in some detail the variety of minerals found there. This is done in seven separate chapters entitled ‘Bulk and Non-Metallic Minerals From the Seas’ ‘Metals From the Shallow Seas’ ‘Metals From the Deep Oceans’ ‘Minerals From Solution’ ‘Oil and Gas from the Shallow Seas’ ‘Oil and Gas From Deep Waters’ and ‘Coal Beneath the Sea.’ The remaining chapters give a brief regional review of marine minerals distribution for eight areas of significant socioeconomic structure, and a short recapitulation of special problems of mineral recovery in the marine environment including such matters as the effect of water motion on mineral processing and of international law on investments. Glossaries of geological periods and technical terms, a short list of references, and an index complete the work.

  11. 低碳经济与选矿行业深化发展关系的思考%Thinks on relationship between low carbon economy and further development of mineral processing industry

    Institute of Scientific and Technical Information of China (English)

    童雄; 罗溪梅

    2011-01-01

    The concept of low carbon economy is introduced, and the necessity of propelling low carbon economy in mineral processing industry is general analyzed. In addition, it is indicated that to comprehensively utilize tailings, enhance concentrate grade, develop new-type equipments and optimize mineral processing technologies etc. are necessary measures to propel low carbon economy and promote the sustainable development of the mineral processing industry.%介绍了低碳经济的概念,浅析选矿行业推行低碳经济的必要性,指出综合利用尾矿、提高选矿品位、研发新型设备以及优化选矿工艺等是推行低碳经济、促进选矿行业可持续发展的必要措施。

  12. The Ministry of Land and Resources Supports the Western Region to Intensify Efforts in Prospecting and Developing Advantageous Mineral Resources

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>The Ministry of Land and Resources supports the western region to intensify efforts in prospecting, developing and utilizing advantageous mineral resources including petrol, natural gas, and coal resources, build advantageous mineral economy, speed up the development of nonferrous metals, key building materials, and non metal mineral resources with obvious

  13. 挪威油气工业中的资源、资产、资本综合管理模式%Mineral resource, mineral property and mineral capital integration management in Norway oil industry

    Institute of Scientific and Technical Information of China (English)

    杨宗喜; 金玺; 唐金荣; 郑人瑞

    2014-01-01

    油气工业对挪威经济的发展起到了重要作用,为挪威创造了巨大的财富,而这主要源于挪威政府对其油气资源的高效管理。本文从资产管理和资本运作的角度出发,探讨了挪威油气资源的综合管理模式。在油气资源国家所有的体现形式方面,挪威并未实行世界通行的权利金制度,而是通过国有资产管理公司(Petoro公司)在很多油气项目上大量参股、对油气公司征税、以及国有油气公司(Statoil公司)的占股分红等方式获得油气资源的所有权权益收益,体现出挪威油气资源的资产化管理模式。而挪威与油气资源有关的所有收入都被纳入政府(全球)养老金,这笔基金也只投资海外市场,在不影响其本国经济的基础上,实现了基金的保值增值,体现了油气资源的资本化管理方式。%Oil-Gas sector is significant in the economic development of Norway ,and provides Norway a huge fortune because of the efficient management of Norway government .We discuss the integration management model in the Norway Oil-Gas industry in the view of resource ,property and capital .The results show that Norway doesn’t take a royalty share of its oil and gas production .Instead ,Norway makes all of its oil-gas money by oil-gas company taxing ,taking a equity share by Petoro ,and earning stock dividends from Statoil .This is a management way of capitalization management .While all of the cash flow from Petoro ,the Statoil dividends and oil and gas profits taxes go into Norway’s Government Pension Fund Global ,and all of the money is invested abroad that maintain and increase the value of Fund .This is a management way of asset management .

  14. Evaluation of the mineral impurities and wear down in alcohol and sugar industry; Avaliacao das impurezas minerais e desgaste na industria sucroalcooleira atraves de analise por ativacao neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Bacchi, Marcio A.

    1993-01-01

    A tropical clime culture, the sugar cane is planted mainly in underdeveloped countries, being a important economic source. The agricultural sector received during many years funds for technological development, but the sugar cane pressing system did not receive significant technical evolution since the fifties. One of the problem needs solution is the low quality of the raw material, caused by the difficulty of the reaping operation, it causes exaggerated addiction of impurities. The industrial ware down in plants and distilleries does not come exclusively from the action from mineral impurities, occurring also in the processing of pure raw material, free of soil, but is known that the great increase in ware down especially in the extraction system due to the presence of soil on the cane. Keeping the level of minerals to the minimum, makes the ware down to follow to acceptable technical and economical levels. This paper discusses the possibility of quantify the ware down of the extraction equipment by neutron activation of samples collected in one sugar cane plant. For that, the study of the behavior of the elements from sugar cane itself and soil present as impurity and the ware down of the metallic equipment. It was not possible quantify any addition of ware down elements in cane and its derivatives, by the processing system. The iron demonstrated to be a potential tracer element of ware down but the high rates of soil makes difficult the measurement of this element, when proceeding from of the ware down. The reason iron/scandium might be useful in identification of iron of mechanical ware down origin, serving as label of soil origin. Iron and thorium are good tracers of soil in sugar cane loads, being usable for the determination of the impurities levels once known their concentration in the sugar cane original soils. 70 refs., 9 figs., 16 tabs.

  15. ROCKS & MINERALS DETERMINATION AND ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20150204 Abaydulla Alimjan(Department of Chemistry and Environmental Sciences,Kashgar Teachers College,Kashgar 844006,China);Cheng Chunying Non-Metallic Element Composition Analysis of Non-Ferrous Metal Ores from Oytagh Town,Xinjiang(Rock and Mineral Analysis,ISSN0254-5357,CN11-2131/TD,33(1),2014,p.44-50,5illus.,4tables,28refs.)Key words:nonferrous metals ore,nonmetals,chemical analysis,thermogravimetric analysis Anions in non-ferrous ore materials

  16. Computer Simulation of the Formation of Non-Metallic Precipitates During a Continuous Casting of Steel

    Directory of Open Access Journals (Sweden)

    Kalisz D.

    2016-03-01

    Full Text Available The authors own computer software, based on the Ueshima mathematical model with taking into account the back diffusion, determined from the Wołczyński equation, was developed for simulation calculations. The applied calculation procedure allowed to determine the chemical composition of the non-metallic phase in steel deoxidised by means of Mn, Si and Al, at the given cooling rate. The calculation results were confirmed by the analysis of samples taken from the determined areas of the cast ingot. This indicates that the developed computer software can be applied for designing the steel casting process of the strictly determined chemical composition and for obtaining the required non-metallic precipitates.

  17. Non-metallic catalysts for diamond synthesis under high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    孙力玲; 吴奇; 戴道扬; 张君; 秦志成; 王文魁

    1999-01-01

    Recent results on conversion from graphite to diamond by aid of non-metallic catalysts are reviewed. The current status of experimental advances is presented and typical examples from relevant literature are provided for understanding the mechanism of the graphite-diamond conversion by aid of these non-metallic catalysts. Furthermore, a tendency of graphite-diamond transformation assisted by carbonates, sulfates or phosphorus under high pressure and high temperature has been investigated by calculating the activation energy and transformation probability of the carbon atoms over a potential barrier. It was found that the activation energy is highly sensitive to the catalyst chosen. The probability sequence of graphite-diamond transformation with these catalysts was put forward.

  18. Color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for non metal clasp denture

    OpenAIRE

    Jang, Dae-Eun; Lee, Ji-Young; Jang, Hyun-Seon; Lee, Jang-Jae; Son, Mee-Kyoung

    2015-01-01

    PURPOSE The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study...

  19. Behavior of Non-metallic Inclusions in Centrifugal Induction Electroslag Castings

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    (para)In order to know the behavior of non-metallic inclusions in centrifugal induction electroslag castings (CIESC), non-metallic inclusions in 5CrMnMo and 4Cr5MoSiV1 were qualitatively and quantitatively analyzed. The largest size of inclusions in the casting and the thermodynamic possibility of TiN precipitation in steel were also calculated. The results show that sulfide inclusions are evenly distributed and the content is low. The amount of oxide inclusions in CIESC 4Cr5MoSiV1 steel is close to the ESR steel and lower than that in the EAF steel, and there are some differences along radial direction. Nitride inclusions are fine and the diameter of the largest one is 3~4um. With the increase of the centrifugal machine's rotational speed, the ratio of round inclusions increases and the ratio of sharp inclusions decreases. According to the experiment and the calculation results, it is pointed out that the largest diameter of non-metallic inclusions in the CIESC 4Cr5MoSiV1 casting is only 6.6mu, and [N%][Ti%] in 4Cr5MoSiV1 steel should be controlled less than 4.4~#U00d7tex010^{-5} in order to further reduce the amount and size of TiN inclusions.

  20. Refractory Minerals in Henan Province

    Institute of Scientific and Technical Information of China (English)

    JIN Qinguo; LI Jing; LIU Jiehua; LIU Yanjun

    2004-01-01

    Henan province is very rich in refractory minerals of many varieties including silica, dolomite, graphite,pearlite, sepiolite, olivine, and sillimanite group minerals, besides the abundant reserves of fireclay and bauxite,which lay a good foundation for the development of the refractories industry of the province. The paper introduces the reserves, distribution and character of the refractory minerals in Henan province.

  1. Evaluation of Characteristics of Non-Metallic Inclusions in P/M Ni-Base Superalloy by Automatic Image Analysis

    Institute of Scientific and Technical Information of China (English)

    Li; Xinggang; Ge; Changchun; Shen; Weiping

    2007-01-01

    Non-metallic inclusions,especially the large ones,within P/M Ni-base superalloy have a major influence on fatigue characteristics,but are not directly measurable by routine inspection.In this paper,a method,automatic image analysis,is proposed for estimation of the content,size and amount of non-metallic inclusions in superalloy.The methodology for the practical application of this method is described and the factors affecting the precision of the estimation are discussed.In the experiment,the characteristics of the non-metallic inclusions in Ni-base P/M superalloy are analyzed.

  2. Tracking industrial energy efficiency and CO2 emissions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-06-25

    Industry accounts for about one-third of global energy demand. Most of that energy is used to produce raw materials: chemicals, iron and steel, non-metallic minerals, pulp and paper and non-ferrous metals. Just how efficiently is this energy put to work? This question was on the minds of the G8 leaders at their summit in Gleneagles in 2005, when they set a 'Plan of Action for Climate Change, Clean Energy and Sustainable Development'. They called upon the International Energy Agency to provide information and advice in a number of areas including special attention to the industrial sector. Tracking Industrial Energy Efficiency and CO2 Emissions responds to the G8 request. This major new analysis shows how industrial energy efficiency has improved dramatically over the last 25 years. Yet important opportunities for additional gains remain, which is evident when the efficiencies of different countries are compared. This analysis identifies the leaders and the laggards. It explains clearly a complex issue for non-experts. With new statistics, groundbreaking methodologies, thorough analysis and advice, and substantial industry consultation, this publication equips decision makers in the public and private sectors with the essential information that is needed to reshape energy use in manufacturing in a more sustainable manner.

  3. Methodology for the free allocation of emission allowances in the EU ETS post 2012. Sector report for the mineral wool industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-11-15

    In 2013, the third trading period of the EU emission trading scheme (EU ETS) will start. With a few exceptions, no free allocation of emission allowances is foreseen in this third trading period for the emissions related to the production of electricity. These emission allowances will be auctioned. For other emissions, transitional free allocation of emission allowances is envisioned. This free allocation will be based on Community wide allocation rules that will, to the extent feasible, be based on ex-ante benchmarks. In 2013, the free allocation is 80% of the quantity determined via these rules, going down to 30% in 2020. An exception is made for activities that are deemed to be exposed to a significant risk of carbon leakage. These activities will receive an allocation of 100% of the quantity determined via the rules. The benchmarks should in principle be calculated for products, i.e. a specific performance per unit productive output, to ensure that they maximize greenhouse gas reductions throughout each production process of the sectors concerned. In this study for the European Commission, a blueprint for a methodology based on benchmarking is developed to determine the allocation rules in the EU ETS from 2013 onwards. In case where benchmarking is not regarded feasible, alternative approaches are suggested. The methodology allows determining the allocation for each EU ETS installation eligible for free allocation of emission allowances. The focus of this study is on preparing a first blueprint of an allocation methodology for free allocation of emission allowances under the EU Emission Trading Scheme for the period 2013-2020 for installations in the mineral wool industry. The report should be read in conjunction with the report on the project approach and general issues.

  4. Non-metallic, non-Fermi-liquid resistivity of FeCrAs from 0 to 17 GPa.

    Science.gov (United States)

    Tafti, F F; Wu, W; Julian, S R

    2013-09-25

    An unusual, non-metallic resistivity of the 111 iron-pnictide compound FeCrAs is shown to be relatively unchanged under pressures of up to 17 GPa. Combined with our previous finding that this non-metallic behaviour persists from at least 80 mK to 800 K, this shows that the non-metallic phase is exceptionally robust. Antiferromagnetic order, with a Néel temperature TN ∼ 125 K at ambient pressure, is suppressed by pressure at a rate of 7.0 ± 0.4 K GPa(-1), falling to ∼50 K at 10 GPa. We conclude that the formation of a spin-density-wave gap at TN does not play an important role in the non-metallic resistivity of FeCrAs at low temperatures.

  5. Study of the nature of non-metallic inclusions in samples of aluminum and silicon killed low carbon steels, collected in the refining treatment and continuous casting stages

    Directory of Open Access Journals (Sweden)

    José Carlos Santos Pires

    2004-12-01

    Full Text Available The amount, distribution, size and chemical composition of non-metallic inclusions have a direct influence on steel properties. By controlling size and chemical composition of these inclusions, it is possible to get a product with good quality. The identification of the nature and the control of inclusion formation are very important for steel cleanness. The behavior of these inclusions is predictable, in some extent, by the determination of the chemical composition of non-metallic phases that form such inclusions. With the objective of studying the chemical composition, the size and the distribution of such inclusions, samples of aluminum and silicon killed low carbon steels were collected in a national steel industry in the secondary refining and continuous casting stages. These samples were analyzed in the scanning electron microscope (SEM coupled to an energy dispersive analysis system (EDS. From the results, it was possible to evaluate the nature of inclusions and to analyze the effectiveness of the refining process in the reduction of the number and area fraction of the inclusions. It was also possible to verify that the inclusions that remained after treatment, are less damage both to the steel properties as to the continuous casting process (clogging of the submerged valve.

  6. Strength and deformability of compressed concrete elements with various types of non-metallic fiber and rods reinforcement under static loading

    Science.gov (United States)

    Nevskii, A. V.; Baldin, I. V.; Kudyakov, K. L.

    2015-01-01

    Adoption of modern building materials based on non-metallic fibers and their application in concrete structures represent one of the important issues in construction industry. This paper presents results of investigation of several types of raw materials selected: basalt fiber, carbon fiber and composite fiber rods based on glass and carbon. Preliminary testing has shown the possibility of raw materials to be effectively used in compressed concrete elements. Experimental program to define strength and deformability of compressed concrete elements with non-metallic fiber reinforcement and rod composite reinforcement included design, manufacture and testing of several types of concrete samples with different types of fiber and longitudinal rod reinforcement. The samples were tested under compressive static load. The results demonstrated that fiber reinforcement of concrete allows increasing carrying capacity of compressed concrete elements and reducing their deformability. Using composite longitudinal reinforcement instead of steel longitudinal reinforcement in compressed concrete elements insignificantly influences bearing capacity. Combined use of composite rod reinforcement and fiber reinforcement in compressed concrete elements enables to achieve maximum strength and minimum deformability.

  7. Non-metallic inclusions structure dimension in high quality steel with medium carbon contents

    Directory of Open Access Journals (Sweden)

    T. Lipiński

    2009-07-01

    Full Text Available The experimental material consisted of semi-finished products of high-grade, medium-carbon structural steel. The production process involved two melting technologies: steel melting in a 140-ton basic arc furnace with desulfurization and argon refining variants, and in a 100-ton oxygen converter. Billet samples were collected to analyze the content of non-metallic inclusions with the use of an optical microscope and a video inspection microscope. The results were processed and presented in graphic form.

  8. Separation of the metallic and non-metallic fraction from printed circuit boards employing green technology.

    Science.gov (United States)

    Estrada-Ruiz, R H; Flores-Campos, R; Gámez-Altamirano, H A; Velarde-Sánchez, E J

    2016-07-05

    The generation of electrical and electronic waste is increasing day by day; recycling is attractive because of the metallic fraction containing these. Nevertheless, conventional techniques are highly polluting. The comminution of the printed circuit boards followed by an inverse flotation process is a clean technique that allows one to separate the metallic fraction from the non-metallic fraction. It was found that particle size and superficial air velocity are the main variables in the separation of the different fractions. In this way an efficient separation is achieved by avoiding the environmental contamination coupled with the possible utilization of the different fractions obtained. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. A Review of Post and Core Application with Emphasize on Non Metallic Posts

    Directory of Open Access Journals (Sweden)

    Shahroodi MH

    2001-05-01

    Full Text Available Many different methods are suggested to restore endodontically treated teeth. Prefabricated posts can not be indicated for all teeth and cast posts require extra time and cost. In addition, with the introduction of full ceramic restorations, achieving the ideal esthetic with metal post underneath them may be problematic or impossible because the darkness of the metallic posts may show through the highly translucent all ceramic restorations. In this article the review of litature and describiton of applied methods of different procedure in restoring the root canal therapied teeth and few techniques of non metallic posts fabrication such as fiber reinforced composite and zirconium oxide posts have been described.

  10. Strategic Minerals: U.S. Alternatives

    Science.gov (United States)

    1990-02-01

    become one of the world’s leading industrial powers by being a mineral-short nation. It has economic reserves in all but 12 of the 71 minerals in world...Sirategic Minerals and ferroalloy industries, the chemical and petrochemical indus- tries, the machine tool industry, and the nuclear power industries...supply.4 The historical record shows a mixed picture of reliability. Since World War II. supply problems have pestered metals users. Interruptions

  11. Proceedings of XXIV international mineral processing congress

    Energy Technology Data Exchange (ETDEWEB)

    Wang Dianzuo; Sun Chuan Yao; Wang Fu Liang; Zhang Li Cheng; Han Long (eds.)

    2008-07-01

    Topics covered in volume 1 include applied mineralogy, comminution, classification, physical separation, flotation chemistry, sulphide flotation, non-sulphide flotation and reagent in mineral industry. Volume 2 covers processing of complex ores, processing of industrial minerals and coal, solid liquid separation, dispersion and aggregation, process simulation, expert systems and control of mineral processing, biohydrometallurgy, and mineral chemical processing. Volume 3 contains powder technology, mineral materials, treatment and recycling for solid wastes, waste water treatment, secondary resource recovery, soil remediation, concentrator engineering and process design, and application of mineral processing in related industry. It includes a CD-ROM of the proceedings.

  12. Proceedings of the 14. international symposium on mine planning and equipment selection (MPES) 2005 and the 5. international conference on computer applications in the minerals industries (CAMI 2005). CD ed.

    Energy Technology Data Exchange (ETDEWEB)

    Singhal, R.J. [Government of Canada, Ottawa, ON (Canada)]|[Laval Univ., Ste-Foy, PQ (Canada). Dept. of Mining, Metallurgical and Materials Engineering]|[International Journal of Surface Mining, Reclamation and Environment, Calgary, AB (Canada); Fytas, K. [Laval Univ., Ste-Foy, PQ (Canada). Dept. of Mining, Metallurgical and Materials Engineering; Chiwetelu, C. [Government of Canada, Ottawa, ON (Canada)] (eds.)

    2005-07-01

    This conference provided a forum to discuss leading and emerging technologies in the field of mining, mine planning and computer applications in the minerals industries. Participants from government, industry and academia from more than 15 countries contributed to the proceedings which will be of interest to engineers, scientists, consultants and government personnel responsible for the development and application of innovative technologies in the minerals industries. The conference contributes to the development of high-tech methods and technologies for various segments of the mining and processing industries. The session on coal mining technologies addressed issues associated with process equipment and quality control; open pit mine planning, design, and productivity gains; underground mine planning; drilling, blasting and excavation engineering; mining equipment selection, automation and information technology; mine maintenance and production management; e-maintenance, e-diagnostics, and prognostics; tunneling and other excavation equipment; case histories from coal mining, industrial minerals and metalliferous mining; cost effective methods of mine reclamation, mine closure and waste disposal; advances in mine design, mine optimization and reclamation planning technologies. The session on mine equipment focused on design, selection, and real-time health and performance monitoring; mine and machine automation; and GIS, GPS, telecommunications, artificial intelligence, and Internet application. The final session on rock mechanics and geotechnical applications focused on underground and surface mine stability, groundwater, tailings and waste disposal; computer simulation; real-time mine management systems; and computer applications in mining education. The conference featured 126 presentations of which 18 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  13. [An optical-fiber-sensor-based spectrophotometer for soil non-metallic nutrient determination].

    Science.gov (United States)

    He, Dong-xian; Hu, Juan-xiu; Lu, Shao-kun; He, Hou-yong

    2012-01-01

    In order to achieve rapid, convenient and efficient soil nutrient determination in soil testing and fertilizer recommendation, a portable optical-fiber-sensor-based spectrophotometer including immersed fiber sensor, flat field holographic concave grating, and diode array detector was developed for soil non-metallic nutrient determination. According to national standard of ultraviolet and visible spectrophotometer with JJG 178-2007, the wavelength accuracy and repeatability, baseline stability, transmittance accuracy and repeatability measured by the prototype instrument were satisfied with the national standard of III level; minimum spectral bandwidth, noise and excursion, and stray light were satisfied with the national standard of IV level. Significant linear relationships with slope of closing to 1 were found between the soil available nutrient contents including soil nitrate nitrogen, ammonia nitrogen, available phosphorus, available sulfur, available boron, and organic matter measured by the prototype instrument compared with that measured by two commercial single-beam-based and dual-beam-based spectrophotometers. No significant differences were revealed from the above comparison data. Therefore, the optical-fiber-sensor-based spectrophotometer can be used for rapid soil non-metallic nutrient determination with a high accuracy.

  14. Solution behavior of hydrogen isotopes and other non-metallic elements in liquid lithium

    Energy Technology Data Exchange (ETDEWEB)

    Maroni, V.A.; Calaway, W.F.; Veleckis, E.; Yonco, R.M.

    1976-01-01

    Results of experimental studies to measure selected thermodynamic properties for systems of lithium with non-metallic elements are reported. Investigations of the Li-H, Li-D, and Li-T systems have led to the elucidation of the dilute solution behavior and the H/D/T isotope effects. In the case of the Li-H and Li-D systems, the principal features of the respective phase diagrams have been delineated. The solubility of Li-D in liquid lithium has been measured down to 200/sup 0/C. The solubility of Li/sub 3/N in liquid lithium and the thermal decomposition of Li/sub 3/N have also been studied. From these data, the free energy of formation of Li/sub 3/N and the Sieverts' constant for dissolution of nitrogen in lithium have been determined. Based on studies of the distribution of non-metallic elements between liquid lithium and selected molten salts, it appears that molten salt extraction offers promise as a means of removing these impurity elements (e.g., H, D, T, O, N, C) from liquid lithium.

  15. PVC-based composite material containing recycled non-metallic printed circuit board (PCB) powders.

    Science.gov (United States)

    Wang, Xinjie; Guo, Yuwen; Liu, Jingyang; Qiao, Qi; Liang, Jijun

    2010-12-01

    The study is directed to the use of non-metallic powders obtained from comminuted recycled paper-based printed circuit boards (PCBs) as an additive to polyvinyl chloride (PVC) substrate. The physical properties of the non-metallic PCB (NMPCB) powders were measured, and the morphological, mechanical and thermal properties of the NMPCB/PVC composite material were investigated. The results show that recycled NMPCB powders, when added below a threshold, tended to increase the tensile strength and bending strength of PVC. When 20 wt% NMPCB powders (relative to the substrate PVC) of an average diameter of 0.08 mm were added, the composite tensile strength and bending strength reached 22.6 MPa and 39.83 MPa, respectively, representing 107.2% and 123.1% improvement over pure PVC. The elongation at break of the composite material reached 151.94% of that of pure PVC, while the Vicat softening temperature of the composite material did not increase significantly compared to the pure PVC. The above results suggest that paper-based NMPCB powders, when used at appropriate amounts, can be effective for toughening PVC. Thus, this study suggests a new route for reusing paper-based NMPCB, which may have a significant beneficial environmental impact.

  16. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

    Science.gov (United States)

    Grady, Joseph E.; Halbig, Michael C.; Singh, Mrityunjay

    2015-01-01

    In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing", evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  17. Chemical and Biological Catalytic Enhancement of Weathering of Silicate Minerals and industrial wastes as a Novel Carbon Capture and Storage Technology

    Science.gov (United States)

    Park, A. H. A.

    2014-12-01

    Increasing concentration of CO2 in the atmosphere is attributed to rising consumption of fossil fuels around the world. The development of solutions to reduce CO2 emissions to the atmosphere is one of the most urgent needs of today's society. One of the most stable and long-term solutions for storing CO2 is via carbon mineralization, where minerals containing metal oxides of Ca or Mg are reacted with CO2 to produce thermodynamically stable Ca- and Mg-carbonates that are insoluble in water. Carbon mineralization can be carried out in-situ or ex-situ. In the case of in-situ mineralization, the degree of carbonation is thought to be limited by both mineral dissolution and carbonate precipitation reaction kinetics, and must be well understood to predict the ultimate fate of CO2 within geological reservoirs. While the kinetics of in-situ mineral trapping via carbonation is naturally slow, it can be enhanced at high temperature and high partial pressure of CO2. The addition of weak organic acids produced from food waste has also been shown to enhance mineral weathering kinetics. In the case of the ex-situ carbon mineralization, the role of these ligand-bearing organic acids can be further amplified for silicate mineral dissolution. Unfortunately, high mineral dissolution rates often lead to the formation of a silica-rich passivation layer on the surface of silicate minerals. Thus, the use of novel solvent mixture that allows chemically catalyzed removal of this passivation layer during enhanced Mg-leaching surface reaction has been proposed and demonstrated. Furthermore, an engineered biological catalyst, carbonic anhydrase, has been developed and evaluated to accelerate the hydration of CO2, which is another potentially rate-limiting step of the carbonation reaction. The development of these novel catalytic reaction schemes has significantly improved the overall efficiency and sustainability of in-situ and ex-situ mineral carbonation technologies and allowed direct

  18. Significance of bioleaching method in dissolution of iron and in the quality improvement of non-metallics

    Directory of Open Access Journals (Sweden)

    Iveta Štyriaková

    2006-12-01

    Full Text Available Simple laboratory bioleaching experiments for the iron removal with heterotrophic bacteria on natural raw materials were conducted to explore a simple cyclic operation for a potential use at the industrial scale. Heterotrophic bacteria of Bacillus spp. growing in the presence of feldspar raw materials are able to dissolve iron. Anaerobic conditions Quickly formed by bacteria enable a simple manipulation with the sample solution. Insoluble Fe(III in the feldspars sample could be enzymatically dissolved as Fe3+ and also reduced to soluble Fe2+ by silicate bacteria of Bacillus spp. This metal was efficiently removed from the feldspars sample as documented by a Fe2O3 decrease (from 0.29 % to 0.12 % after bioleaching in the conical flask and by a Fe2O3 decrease (from 0.29 % to 0.19 % after bioleaching in the percolate column. Bioleaching of Fe was more effective in the conical flask. Iron-bearing minerals can be easily removed by magnetic separation, but ultra fine iron particles are difficult to treat by conventional mineral processing methods. Thus bioleaching is an attractive alternative for effective removal of iron minerals. The removal of iron with the whiteness increase should give a product, which is fit for industrial ceramic applications.

  19. Marine Mineral Exploration

    DEFF Research Database (Denmark)

    The past 20 years have seen extensive marine exploration work by the major industrialized countries. Studies have, in part, been concentrated on Pacific manganese nodule occurrences and on massive sulfides on mid-oceanic ridges. An international jurisdictional framework of the sea-bed mineral...... in EEZ areas are fairly unknown; many areas need detailed mapping and mineral exploration, and the majority of coastal or island states with large EEZ areas have little experience in exploration for marine hard minerals. This book describes the systematic steps in marine mineral exploration....... Such exploration requires knowledge of mineral deposits and models of their formation, of geophysical and geochemical exploration methods, and of data evaluation and interpretation methods. These topics are described in detail by an international group of authors. A short description is also given of marine...

  20. Present situation problems and upgrading path selection of western regional mineral resources industry%西部矿产资源产业的现状、问题及升级路径选择

    Institute of Scientific and Technical Information of China (English)

    谢雄标; 严良

    2011-01-01

    西部矿产资源产业如何转型升级、科学发展是我国社会经济可持续发展迫切需要解决的重大战略问题.本文在系统分析西部矿产资源产业的现状和存在问题的基础上,提出了转型升级路径的选择.研究认为,西部矿产资源产业发展迅速,但仍存在产业粗放发展、结构不合理、环境破坏严重和技术创新能力弱等问题.必须建立以技术创新为基础、以循环经济为纽带、与制造业、高新技术产业共生发展的生态工业园和产业集群,通过产业组织变化和价值创新,提高产业效率,实现产业功能转型.%As it is a major strategic issue of the regional mineral resources industrial transformation and upgrading as well as its scientific development for the sustainable development of both society and economy in western China, this paper presents the issue of path selection for industrial transformation and upgrading after having discussed the present situation and problems of the western regional mineral resources industry. Although the mineral resources industry develops rapidly, there are still a lot of problems of extensive development, irrational structure, environment destruction, weak capacity of technical innovation and so on. To solve these problems, a group of technical innovation-based eco-industrial parks and clusters must be established taking circular economy as a link and developing together with the manufacturing and high-tech industries. Only with the help of eco-industrial parks and clusters, it can realize the industry' s functional transformation and productivity improvement through organizational changes and value innovation.

  1. Marketization' s Influence on the Scientific Development of Mineral Resources Industry%市场化程度影响我国矿业科学发展的实证研究

    Institute of Scientific and Technical Information of China (English)

    张希; 陈文俊; 刘小庆

    2012-01-01

    选取2004--2008年中国矿产资源产业的数据为分析样本,构建了市场化程度影响矿产资源产业科学发展的静态面板计量模型。分别从产业科学发展水平、产业发展、产业协调性、产业可持续性和产业人文关怀五个方面实证研究了市场化程度对矿产资源产业科学发展的影响,结果表明:产权多元化和市场化定价会推动矿产资源产业协调发展、可持续发展和人文关怀,市场开放将有利于提高产业科学发展总体水平、产业经济发展水平、协调程度、可持续发展能力和产业人文关怀,市场竞争机制则能够促进产业经济发展水平和产业协调发展水平提高。%This paper builds an econometric model to explore how marketization affects China' s scientific development of mineral resources industry from five aspects of industry' s scientific development level, industry development, coordination, sustainability and humanistic care. This is based on the Chinese mineral resources industry' s data from 2004 to 2008. The empirical result shows that property diversification and market-oriented pricing promote mineral resources industry' s coordination, sustainability and humanistic care, market opening improves mineral resources industry' s scientific development level, coordination, sustainability and humanistic care, while market competition mechanism promote its coordination and sustainability.

  2. 矿产资源型产业集群的风险分析及政策选择--以陕北能源化工基地为例%Risk Analysis and Policy Selection on Mineral Resource-based Industrial Cluster:a Case of Energy Chemical Industry of North Shaanxi

    Institute of Scientific and Technical Information of China (English)

    白嘉

    2013-01-01

    矿产资源型产业集群具有资源诅咒效应显著、产业链短、产业结构单一、可持续性差等风险。陕北能源化工产业在自然资源优势、政策优势和科教优势的基础上,已初步形成以煤炭、石油和天然气开采、加工、利用为核心的矿产资源型产业集群。但由于区位环境和体制因素的影响,陕北矿产资源型产业集群面临自主创新能力弱,产业结构与布局不合理以及环境成本高三种风险。根据陕北地区的实际情况,可以通过提高区域自主创新能力,优化产业结构以及建立循环经济产业园来推动陕北矿产资源型产业集群的持续发展。%Mineral resource-based industrial cluster is confronted with risk of resource curse, short industrial chain, single industrial structure and poor sustainability. On the basis of advantages of natural resource, policy, science and technology, and education, energy chemical industry of north Shaanxi has come into being mineral resource-based industrial clusters with characteristics of exploitation, processing and utilization of coal, petroleum and natural gas. Nevertheless, mineral resource -based industrial clusters of north Shaanxi faces risk of inferior capability of independent innovation, unreasonableness of structure and layout of industries, and high cost of environment. According to current situation of north Shaanxi, policies of enhancing capability of regional independent innovation, optimizing industrial structure and establishing industrial park based on cyclic economy can be adopted to propel sustained development of mineral resource-based industrial clusters of north Shaanxi.

  3. X-ray detection of ingested non-metallic foreign bodies.

    Science.gov (United States)

    Saps, Miguel; Rosen, John M; Ecanow, Jacob

    2014-05-08

    To determine the utility of X-ray in identifying non-metallic foreign body (FB) and assess inter-radiologist agreement in identifying non-metal FB. Focus groups of nurses, fellows, and attending physicians were conducted to determine commonly ingested objects suitable for inclusion. Twelve potentially ingested objects (clay, plastic bead, crayon, plastic ring, plastic army figure, glass bead, paperclip, drywall anchor, eraser, Lego™, plastic triangle toy, and barrette) were embedded in a gelatin slab placed on top of a water-equivalent phantom to simulate density of a child's abdomen. The items were selected due to wide availability and appropriate size for accidental pediatric ingestion. Plain radiography of the embedded FBs was obtained. Five experienced radiologists blinded to number and types of objects were asked to identify the FBs. The radiologist was first asked to count the number of items that were visible then to identify the shape of each item and describe it to a study investigator who recorded all responses. Overall inter-rater reliability was analyzed using percent agreement and κ coefficient. We calculated P value to assess the probability of error involved in accepting the κ value. Fourteen objects were radiographed including 12 original objects and 2 duplicates. The model's validity was supported by clear identification of a radiolucent paperclip as a positive control, and lack of identification of plastic beads (negative control) despite repeated inclusion. Each radiologist identified 7-9 of the 14 objects (mean 8, 67%). Six unique objects (50%) were identified by all radiologists and four unique objects (33%) were not identified by any radiologist (plastic bead, Lego™, plastic triangle toy, and barrette). Identification of objects that were not present, false-positives, occurred 1-2 times per radiologist (mean 1.4). An additional 17% of unique objects were identified by less than half of the radiologists. Agreement between radiologists was

  4. Aggregate and Mineral Resources, Mines - This data set is derived from the Bureau of Mines Minerals Availability System (MAS) data set. Most of the information is from the Minerals Industry System Location (MILS) table., Published in 1993, Arizona State Land Department.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Aggregate and Mineral Resources dataset as of 1993. It is described as 'Mines - This data set is derived from the Bureau of Mines Minerals Availability System...

  5. Calculating the Carrying Capacity of Flexural Prestressed Concrete Beams with Non-Metallic Reinforcement

    Directory of Open Access Journals (Sweden)

    Mantas Atutis

    2011-04-01

    Full Text Available The article reviews moment resistance design methods of prestressed concrete beams with fibre-reinforced polymer (FRP reinforcement. FRP tendons exhibit linear elastic response to rupture without yielding and thus failure is expected to be brittle. The structural behaviour of beams prestressed with FRP tendons is different from beams with traditional steel reinforcement. Depending on the reinforcement ratio, the flexural behaviour of the beam can be divided into several groups. The numerical results show that depending on the nature of the element failure, moment resistance calculation results are different by using reviewed methods. It was found, that the use of non-metallic reinforcement in prestressed concrete structures is effective: moment capacity is about 5% higher than that of the beams with conventional steel reinforcement.Article in Lithuanian

  6. The share of non-metallic inclusions in high-grade steel for machine parts

    Directory of Open Access Journals (Sweden)

    T. Lipiński

    2010-10-01

    Full Text Available The aim of this work was to compare the differences in the purity steel in the dimensions of inclusion particles as dependent on various steel production processes. The experimental material consisted of semi-finished products of high-grade, medium-carbon constructional steel with: manganese, chromium, nickel, molybdenum and boron. The impurity content of steel was low as phosphorus and sulphur levels did not exceed 0.025%. The experimental material consisted of steel products obtained in three metallurgical processes: electric, electric with argon refining and oxygen converter with vacuum degassing of steel. Billet samples were collected to determine: chemical composition, relative volume of non-metallic inclusions, dimensions of impurities. The results were processed and presented in graphic form.

  7. Morphology and Orientation Selection of Non-metallic Inclusions in Electrified Molten Metal

    Science.gov (United States)

    Zhao, Z. C.; Qin, R. S.

    2017-10-01

    The effect of electric current on morphology and orientation selection of non-metallic inclusions in molten metal has been investigated using theoretical modeling and numerical calculation. Two geometric factors, namely the circularity ( fc ) and alignment ratio ( fe ) were introduced to describe the inclusions shape and configuration. Electric current free energy was calculated and the values were used to determine the thermodynamic preference between different microstructures. Electric current promotes the development of inclusion along the current direction by either expatiating directional growth or enhancing directional agglomeration. Reconfiguration of the inclusions to reduce the system electric resistance drives the phenomena. The morphology and orientation selection follow the routine to reduce electric free energy. The numerical results are in agreement with our experimental observations.

  8. Nuclide, metal and non metal levels in percolated water from soils fertilized with phosphogypsum

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Camilla Bof; Knupp, Eliana Aparecida Nonato; Palmieri, Helena E.L.; Jacomino, Vanusa Maria Feliciano, E-mail: cgbs@cdtn.b [Nuclear Technology Development Center (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Taddei, Maria Helena; Ciqueira, Maria Celia [Pocos de Caldas Lab., (LAPOC/CNEN), Pocos de Caldas, MG (Brazil)

    2009-07-01

    Systematic generation of residues is more and more worrying in today.s world; adequate storage and reutilization are of great importance. Since generation of residues has become impossible to avoid, the possibility of reuse must be studied and researched. An example of these residues is phosphogypsum, which is generated in phosphoric acid production at the rate of around 4.8 tons for each ton of phosphoric acid produced. Many studies seek to reuse phosphogypsum in agriculture as a source of calcium and sulfur, potassium or aluminum, especially in soils from Brazil's cerrado regions. Though phosphogypsum is mainly composed of dehydrated calcium sulfate, it can have high levels of heavy metals, non metals (As and Se), fluorides and natural radionuclides. Thus, its uncontrolled use as a soil conditioner can lead to contamination of underground water. (author)

  9. Determining the sustainability of ceramic and glass industry using environmental management tools; Determinacion de la sostenibilidad de la industria mineral de la ceramica y del vidrio mediante herramientas de gestion ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Espi Rodriguez, J. A.

    2011-07-01

    In the last few years we have seen the creation of an everyday larger and varied series of are creating large and varied series of environmental management tools used to analyze and classify environmentally each mineral and its physical, economic and environmental circumstances. Thus we now, count with the Material Flow Analysis (MFA) of a mining operation, the Life Cycle Analysis (LCA), Energy and Exergy Analysis, Cost Benefit Environmental Analysis, Carbon Footprints, the Best Available Technology (BTA) and many others able to analyze and classify ore deposit site types, availability of resources, environmental impact conditions, transparency in communication and almost all crucial aspects related with the environmental geometry of the mining production process. This paper focuses on the application of some management tools that best fit to the minerals used in the ceramic and glass industry. (Author) 12 refs.

  10. Analysis and simulation of non-metallic inclusions in spheroidal graphite iron

    Science.gov (United States)

    Pustal, B.; Schelnberger, B.; Bührig-Polaczek, A.

    2016-03-01

    Non-metallic inclusions in spheroidal cast iron (SGI) reduce fatigue strength and yield strength. This type of inclusion usually accumulates at grain boundaries. Papers addressing this topic show the overall impact of both the fraction of so-called white (carbides) and black (non-metallic) inclusions on mechanical properties. In the present work we focus on the origin and the formation conditions of black Mg-bearing inclusions, further distinguishing between Si-bearing and non-Si-bearing Mg inclusions. The formation was simulated applying thermodynamic approaches. Moreover, appropriate experiments have been carried out and a large number of particles have been studied applying innovative feature analysis with regard to shape, size, and composition. Magnesium silicates are predicted at elevated oxygen concentrations, whereas at low levels of oxygen sulphides and carbides appear at a late stage of solidification. Experiments with three consecutive flow obstacles show that the amount of magnesium silicates decrease after each of the three obstacles, whereas the fraction of non-Si-bearing inclusions remains approximately constant. The size of inclusions divides in halves over the flow path and the number of particles increases accordingly. We point out that based on feature analysis Mg-O-C bearing inclusion show disadvantageous form factors for which reason this kind of inclusions may be extremely harmful in terms of crack initiation. All results obtained indicate that magnesium silicates are entrapped on mould filling, whereas Mg-(O, C, S, P, N) bearing particles are precipitates at late stages of solidification. Consequently, the only avoidance strategy is setting up optimum retained magnesium content.

  11. Mineral oils

    Science.gov (United States)

    Furby, N. W.

    1973-01-01

    The characteristics of lubricants made from mineral oils are discussed. Types and compositions of base stocks are reviewed and the product demands and compositions of typical products are outlined. Processes for commercial production of mineral oils are examined. Tables of data are included to show examples of product types and requirements. A chemical analysis of three types of mineral oils is reported.

  12. Radioactivity of phosphate mineral products

    OpenAIRE

    Mitrović Branislava; Vitorović Gordana; Stojanović Mirjana; Vitorović Duško

    2011-01-01

    The phosphate industry is one of the biggest polluters of the environment with uranium. Different products are derived after processing phosphoric ore, such as mineral and phosphate fertilizers and phosphate mineral supplements (dicalcium-and monocalcium phosphate) for animal feeding. Phosphate mineral additives used in animal food may contain a high activity of uranium. Research in this study should provide an answer to the extent in which phosphate minera...

  13. The Deployment of Low Carbon Technologies in Energy Intensive Industries: A Macroeconomic Analysis for Europe, China and India

    Directory of Open Access Journals (Sweden)

    Stefan Nabernegg

    2017-03-01

    Full Text Available Industrial processes currently contribute 40% to global CO2 emissions and therefore substantial increases in industrial energy efficiency are required for reaching the 2 °C target. We assess the macroeconomic effects of deploying low carbon technologies in six energy intensive industrial sectors (Petroleum, Iron and Steel, Non-metallic Minerals, Paper and Pulp, Chemicals, and Electricity in Europe, China and India in 2030. By combining the GAINS technology model with a macroeconomic computable general equilibrium model, we find that output in energy intensive industries declines in Europe by 6% in total, while output increases in China by 11% and in India by 13%. The opposite output effects emerge because low carbon technologies lead to cost savings in China and India but not in Europe. Consequently, the competitiveness of energy intensive industries is improved in China and India relative to Europe, leading to higher exports to Europe. In all regions, the decarbonization of electricity plays the dominant role for mitigation. We find a rebound effect in China and India, in the size of 42% and 34% CO2 reduction, respectively, but not in Europe. Our results indicate that the range of considered low-carbon technology options is not competitive in the European industrial sectors. To foster breakthrough low carbon technologies and maintain industrial competitiveness, targeted technology policy is therefore needed to supplement carbon pricing.

  14. Afghanistans Oil, Gas, and Minerals Industries: $488 Million in U.S. Efforts Show Limited Progress Overall, and Challenges Prevent Further Investment and Growth

    Science.gov (United States)

    2016-01-01

    the Kabul area alone. By contrast, the Afghan government reports that only 300 mines are licensed to operate and are paying taxes . Additionally...the Inspector General Act of 1978, as amended; and in accordance with generally accepted government auditing standards. John F. Sopko Special... business leaders and government officials. In addition to minerals and hydrocarbons development, TFBSO activities included projects to facilitate private

  15. Burden of Noise Induced Hearing Loss among Manufacturing Industrial Workers in Malaysia

    Directory of Open Access Journals (Sweden)

    Noraita TAHIR

    2015-10-01

    Full Text Available Background: Noise induced hearing loss (NIHL is the highest reported occupational disease among industrial workers but there is scarcity of data on disease burden in Malaysia. This study estimated the risks and burden of NIHL in manufacturing industries in Malaysia.Methods: This cross-sectional industrial survey was conducted by interviewing OSH practitioners at 26 industries categorized as food, tobacco, textile, wearing apparel, wood products except furniture, paper, refined petroleum, chemicals, non-metallic mineral, basic metal, fabricated metal, motor vehicle parts. The catchment population is imputed based on stratified sampling design involving 60% of workers diagnosed with NIHL.Results: A total of 18 industries exposed to noise level of 86-90dBA and 8 industries at more than 91dBA were identified. All industries provide regular awareness training and hearing protection device to their workers but none of them implement attenuation, majority of them (81% conduct onsite audiometric test annually. In overall, the risk of NIHL and incidence per 100,000 manufacturing workers projected is 8% (139 new cases, the highest risk and incidence is 32% (26 in motor vehicle parts industry; followed by 23% (1140 new cases in tobacco industry and 23% (269 new cases in fabricated metal industry. Male workers (89% were exposed to a greater risk compared to female (11%. It was estimated that 103,000 workers were potentially affected by NIHL in Malaysia.Conclusion: NIHL is a major burden among industrial workers in Malaysia. Implementation of effective hearing conservation program and self-enforcement of noise regulations by the employer could potentially reduce the burden. Keywords: Noise, Hearing loss, Manufacturing, Malaysia

  16. Geotechnical Description of Mineral Deposits

    Directory of Open Access Journals (Sweden)

    Sasvári Tibor

    1996-06-01

    Full Text Available Performing various mineral deposits extraction methods requires thorough knowledge of the rock masses` geomechanical parameters. In the geotechnical description of mineral deposits there is proposed a methodical approarch at the collection, registration, and evaluation of rock masses` geological properties for geotechnics being applied within the mining industry.

  17. Influence of non-metallic inclusions on the strength properties of screws made of 35B2+Cr steel after softening

    OpenAIRE

    Krawczyk, J.; Pawłowski, B

    2012-01-01

    Purpose: This paper presents the results of the research on the influence of non-metallic inclusions on strength properties of 35B2+Cr steel screws.Design/methodology/approach: The investigations were carried out on screws after softening. The investigated steels with different fraction of non-metallic inclusions were delivered by three different suppliers.Findings: It was proved, that in spite of the level of fraction of non-metallic inclusions compatible with the corresponding standards, th...

  18. Mineral facilities of Europe

    Science.gov (United States)

    Almanzar, Francisco; Baker, Michael S.; Elias, Nurudeen; Guzman, Eric

    2010-01-01

    This map displays over 1,700 records of mineral facilities within the countries of Europe and western Eurasia. Each record represents one commodity and one facility type at a single geographic location. Facility types include mines, oil and gas fields, and plants, such as refineries, smelters, and mills. Common commodities of interest include aluminum, cement, coal, copper, gold, iron and steel, lead, nickel, petroleum, salt, silver, and zinc. Records include attributes, such as commodity, country, location, company name, facility type and capacity (if applicable), and latitude and longitude geographical coordinates (in both degrees-minutes-seconds and decimal degrees). The data shown on this map and in table 1 were compiled from multiple sources, including (1) the most recently available data from the U.S. Geological Survey (USGS) Minerals Yearbook (Europe and Central Eurasia volume), (2) mineral statistics and information from the USGS Minerals Information Web site (http://minerals.usgs.gov/minerals/pubs/country/europe.html), and (3) data collected by the USGS minerals information country specialists from sources, such as statistical publications of individual countries, annual reports and press releases of operating companies, and trade journals. Data reflect the most recently published table of industry structure for each country at the time of this publication. Additional information is available from the country specialists listed in table 2.

  19. Lipophilic super-absorbent polymer gels as surface cleaners for oil and grease from metal and non-metal surfaces

    Science.gov (United States)

    The objective of this research is to develop a new cleaning technology based on lipophilic super-absorbent swelling gels for the removal of oil, grease and particulate matters from metal and non-metal surfaces. It is desired that the cleaner is in solid form and is VOC-exempt, HAP-free, non-toxic, n...

  20. Super-Absorbent polymer gels for oil and grease removal from metal and non-metal surfaces

    Science.gov (United States)

    The objective of this research is to develop a new surface cleaning technology for removal of oil, grease and particulate matters from metal and non-metal surfaces. It is desired that the cleaner is in solid form and is VOC-exempt, HAP-free, non-toxic, non-corrosive, non-ozone depleting, recyclable...

  1. environmental impact of aggregate mining by crush rock industries ...

    African Journals Online (AJOL)

    2012-07-02

    Jul 2, 2012 ... method concerned with the extraction of non-fuel and non-metal minerals from .... pacity, problems in human relations, and a number of ... sons [19], sleep disturbance on the other hand is con- ..... season. This is expected as the dominant wind system .... Chrysanthus, C. Evaluating Baseline Data for Trace.

  2. Metals, non-metals and PCB in electrical and electronic waste--actual levels in Switzerland.

    Science.gov (United States)

    Morf, Leo S; Tremp, Josef; Gloor, Rolf; Schuppisser, Felix; Stengele, Markus; Taverna, Ruedi

    2007-01-01

    The chemical composition of waste of small electrical and electronic equipment (s-WEEE), a rapidly growing waste stream, was determined for selected metals (Cu, Sb, Hg etc.) and non-metals (Cl, Br, P) and PCBs. During a 3-day experiment, all output products and the s-WEEE input mass flows in a WEEE recycling plant were measured. Only output products were sampled and analyzed. Material balances were established, applying substance flow analysis (SFA). Transfer coefficients for the selected substances were also determined. The results demonstrate the capability of SFA to determine the composition of the highly heterogeneous WEEE for most substances with rather low uncertainty (2 sigma +/- 30%). The results confirm the growing importance of s-WEEE regarding secondary resource metals and potential toxic substances. Nowadays, the thirty times smaller s-WEEE turns over larger flows for many substances, compared to municipal solid waste. Transfer coefficient results serve to evaluate the separation efficiency of the recycling process and confirm--with the exception of PCB and Hg--the limitation of hand-sorting and mechanical processing to separate pollutants (Cd, Pb, etc.) out of reusable fractions. Regularly applied SFA would serve to assess the efficacy of legislative, organizational and technical measures on the WEEE.

  3. Absorption of non-metallic inclusions by steelmaking slags—a review

    Directory of Open Access Journals (Sweden)

    Bruno Henrique Reis

    2014-04-01

    Full Text Available The formation of non-metallic inclusions during steelmaking is inevitable and, when not properly controlled, can cause performance and production problems. Slag is one of the resources available to carry out this control. In steelmaking, it is generally understood that inclusions are naturally absorbed by slag when flotation is sufficient. However, separation and dissolution may define the inclusion absorption capacity of slag. The discussion in this review explains the relationship between separation and the contact angle at the steel/inclusion interface, which differentiates the mechanism from liquid and solid inclusions. Whereas liquid particles show more predictable behavior in experimental observations, thermodynamic analysis is necessary in order to describe the removal of solid particles. Among other findings, it is evident that slag viscosity and the formation of compounds at the inclusion/slag interface strongly influence inclusion dissolution capacity. Following a detailed description of findings in the literature, this review considers the most influential factors to aid in optimizing slags for inclusion absorption.

  4. Strength and deformability of concrete beams reinforced by non-metallic fiber and composite rebar

    Science.gov (United States)

    Kudyakov, K. L.; Plevkov, V. S.; Nevskii, A. V.

    2015-01-01

    Production of durable and high-strength concrete structures with unique properties has always been crucial. Therefore special attention has been paid to non-metallic composite and fiber reinforcement. This article describes the experimental research of strength and deformability of concrete beams with dispersed and core fiber-based reinforcement. As composite reinforcement fiberglass reinforced plastic rods with diameters 6 mm and 10 mm are used. Carbon and basalt fibers are used as dispersed reinforcement. The developed experimental program includes designing and production of flexural structures with different parameters of dispersed fiber and composite rebar reinforcement. The preliminary testing of mechanical properties of these materials has shown their effectiveness. Structures underwent bending testing on a special bench by applying flexural static load up to complete destruction. During the tests vertical displacements were recorded, as well as value of actual load, slippage of rebars in concrete, crack formation. As a result of research were obtained structural failure and crack formation graphs, value of fracture load and maximum displacements of the beams at midspan. Analysis of experimental data showed the effectiveness of using dispersed reinforcement of concrete and the need for prestressing of fiberglass composite rebar.

  5. Stepped-Frequency Ground-Penetrating Radar for Detection of Small Non-metallic Buried Objects

    DEFF Research Database (Denmark)

    Jakobsen, Kaj Bjarne; Sørensen, Helge Bjarup Dissing; Nymann, Ole

    1997-01-01

    to an HP8753C Network Analyzer through a 5 m long Sucoflex coaxial cable. The data are collected automatically using an HPIB interface. The collected data contains both the amplitude and phase information of the reflection coefficient. Data are measured at up to a maximum of 401 different frequencies...... at each measurement point using a mesh-grid with a resolution down to 1 mm by 1 mm. The size of the scan area is 1410 mm by 210 mm. Measurements have been performed on loamy soil containing a buried M-56, a non-metallic AP-mine, and various other mine-like objects made of solid plastic, brass, aluminum......, steel, and wood. The presented results are based on probe-data measured at 100 different frequencies at each measurement point and a coarser mesh-grid of 10 mm by 10 mm, since it is found that less probe-data is needed. Our experiments show that even less amount of probe-data may be necessary....

  6. Mineral Commodity Summaries 2008

    Science.gov (United States)

    ,

    2008-01-01

    Each chapter of the 2008 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2007 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves and reserve base information carried for years without alteration because no new information is available; historically reported reserves and reserve base reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines, before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals

  7. Triboelectric separation technology for removing inorganics from non-metallic fraction of waste printed circuit boards: Influence of size fraction and process optimization.

    Science.gov (United States)

    Zhang, Guangwen; Wang, Haifeng; He, Yaqun; Yang, Xing; Peng, Zhen; Zhang, Tao; Wang, Shuai

    2017-02-01

    Removing inorganics from non-metallic fraction (NMF) of waste printed circuit boards (WPCBs) is an effective mean to improve its usability. The effect of size fraction on the triboelectric separation of NMF of WPCBs was investigated in a lab triboelectric separation system and the separation process was optimized in this paper. The elements distribution in raw NMF collected from typical WPCBs recycling plant and each size fraction obtained by sieving were analyzed by X-ray fluorescence (XRF). The results show that the main inorganic elements in NMF are P, Ba, Mn, Sb, Ti, Pb, Zn, Sn, Mg, Fe, Ca, Cu, Al and Si. The inorganic content of each size fraction increased with the size decreasing. The metal elements are mainly distributed in -0.2mm size fraction, and concentrated in middle product of triboelectric separation. The loss on ignition (LOI) of positive product and negative product is higher than that of the middle product for the -0.355mm size fraction, while the LOI presents gradually increasing trend from negative to positive plate for the +0.355mm size fraction. Based on the separation results and mineralogical characterizations of each size fraction of NMF, the pretreatment process including several mineral processing operations was added before triboelectric separation and better separation result was obtained. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Raising Environmental Awareness among Miners in Iran

    Science.gov (United States)

    Mozaffari, Ezatollah

    2013-01-01

    Generation of waste is inevitable but controllable in minerals industry. The aim of this research is to find ways for raising environmental awareness among miners. Miners' attitude towards environmental mining has been investigated. A survey has been done collecting mine managers' point of view coupled with current trend on mine waste management…

  9. Detection of Non-metallic Inclusions in Centrifugal Continuous Casting Steel Billets

    Science.gov (United States)

    Wang, Qiangqiang; Zhang, Lifeng; Seetharaman, Sridhar; Yang, Shufeng; Yang, Wen; Wang, Yi

    2016-06-01

    In the current study, automated particle analysis was employed to detect non-metallic inclusions in steel during a centrifugal continuous casting process of a high-strength low alloy steel. The morphology, composition, size, area fraction, amount, and spatial distribution of inclusions in steel were obtained. Etching experiment was performed to reveal the dendrite structure of the billet and to discuss the effect of centrifugal force on the distribution of oxide inclusions in the final solidified steel by comparing the solidification velocity with the critical velocity reported in literature. It was found that the amount of inclusions was highest in samples from the tundish (~250 per mm2), followed by samples from the mold (~200 per mm2), and lowest in billet samples (~86 per mm2). In all samples, over 90 pct of the inclusions were smaller than 2μm. In steel billets, the content of oxides, dual-phase oxide-sulfides, and sulfides in inclusions were found to be 10, 30, and 60 pct, respectively. The dual-phase inclusions were oxides with sulfides precipitated on the outer surface. Oxide inclusions consisted of high Al2O3 and high MnO which were solid at the molten steel temperature, implying that the calcium treatment was insufficient. Small oxide inclusions very uniformly distributed on the cross section of the billet, while there were more sulfide inclusions showing a banded structure at the outside 25 mm layer of the billet. The calculated solidification velocity was higher than the upper limit at which inclusions were entrapped by the solidifying front, revealing that for oxide inclusions smaller than 8μm in this study, the centrifugal force had little influence on its final distribution in billets. Instead, oxide inclusions were rapidly entrapped by solidifying front.

  10. Minerals in the world economy. Minerals yearbook Volume 3. 1992 international review

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    This edition of the Minerals Yearbook discusses the performance of the worldwide minerals and materials industry during 1992 and provides background information to assist in interpreting that performance. Content of the individual Yearbook volumes follows: Volume I, Metals and Minerals, contains chapters on virtually all metallic and industrial mineral commodities important to the U.S. economy. Volume II, Area Reports: Domestic, contains chapters on the minerals industry of each of the 50 States, Puerto Rico, Northern Marianas, Island Possessions, and Trust Territory. Volume III, Minerals Yearbook--International Review contains the latest available mineral data on more than 175 foreign countries and discusses the importance of minerals to the economies of these nations.

  11. Thorium in mineral products.

    Science.gov (United States)

    Collier, D E; Brown, S A; Blagojevic, N; Soldenhoff, K H; Ring, R J

    2001-01-01

    Many ores contain low levels of thorium. When these ores are processed, the associated radioactivity can be found in mineral concentrates, intermediates and final products. There is an incentive for industries to remove radioactivity from mineral products to allow the movement and sale of these materials, both nationally and internationally, without the need for licensing. Control of thorium in various products involves the development and optimisation of process steps to be able to meet product specifications. The Australian Nuclear Science and Technology Organisation (ANSTO) has undertaken a range of R & D programmes targeting the treatment of thorium-bearing minerals. This paper discusses the application of a microprobe technique for siting radioactivity in zircon and ilmenite and the problems experienced in measuring the concentrations in solid rare earth products.

  12. [Evaluating exposure of population to dust, with consideration of components and dispersion contents of industrial discharges from enterprise extracting and processing mineral raw materials (discussion)].

    Science.gov (United States)

    Mai, I V; Zagorodnov, S Iu; Popova, E V

    2014-01-01

    The article covers results of study concerning disperse content of solid components of discharges from main dust- generating technologic operations in extraction and processing of mineral raw materials (pouring ore to conveyor, drying with combustion gas in fluid-bed, pouring of end product, sorting ore on riddle, drying on vibration dry and cool device, etc). Findings are that fractions under 10 and 2.5 micrometers approach 50% in general structure of dust discharges. Maximal share of low-disperse dust enters ambient air from vibraion dry and cool devices, riddles and pouring places. Exceeded reference values for acute and chronic exposure are registered on TSP and PM10 at a sanitary protection zone border and in the nearest living area points--that can forecast intolerable risks for health of population exposed and necessitate instrumental confirmation of the detected jeopardy level.

  13. Nano-solids in manganese nodules from northern part of Pacific Ocean floor——Nano-solids in minerals and prospects of its uses in industry

    Institute of Scientific and Technical Information of China (English)

    施倪承; 马喆生; 何万中; 罗济民

    1995-01-01

    The study of the crystal structure and particle size of manganese nodules from the northernpart of the Central Pacific Ocean floor indicates that besides the phases of todorokite,birnessite and δ-MnOwith the crystallite size at the micron scale,there are many other multi-phase solids having particle size at thenanomater scale.The chemical analysis,TEM study,M(?)ssbauer spectroscopy and differential thermal analysisshow that they are mainly ferri-hydroxides with the short-range ordered structure similar to that of goethiteand lepidocrocite.The small-angle X-ray scattering measurements indicate that the peak position of the particlesize distribution is at 5-10nm,hence the existence of nano-solids in minerals is confirmed.

  14. An aviation security (AVSEC) screening demonstrator for the detection of non-metallic threats at 28-33 GHz

    Science.gov (United States)

    Salmon, Neil A.; Bowring, Nick; Hutchinson, Simon; Southgate, Matthew; O'Reilly, Dean

    2013-10-01

    The unique selling proposition of millimetre wave technology for security screening is that it provides a stand-off or portal scenario sensing capability for non-metallic threats. The capabilities to detect some non-metallic threats are investigated in this paper, whilst recommissioning the AVSEC portal screening system at the Manchester Metropolitan University. The AVSEC system is a large aperture (1.6 m) portal screening imager which uses spatially incoherent illumination at 28-33 GHz from mode scrambling cavities to illuminate the subject. The imaging capability is critically analysed in terms of this illumination. A novel technique for the measurement of reflectance, refractive index and extinction coefficient is investigated and this then use to characterise the signatures of nitromethane, hexane, methanol, bees wax and baking flour. Millimetre wave images are shown how these liquids in polycarbonate bottles and the other materials appear against the human body.

  15. Cleavage of hydrogen by activation at a single non-metal centre - towards new hydrogen storage materials.

    Science.gov (United States)

    Grabowski, Sławomir J

    2015-05-28

    Molecular surfaces of non-metal species are often characterized by both positive and negative regions of electrostatic potential (EP) at a non-metal centre. This centre may activate molecular hydrogen which further leads to the addition reaction. The positive EP regions at the non-metal centres correspond to σ-holes; the latter sites are enhanced by electronegative substituents. This is why the following simple moieties; PFH2, SFH, AsFH2, SeFH, BrF3, PF(CH3)2 and AsF(CH3)2, were chosen here to analyze the H2 activation and its subsequent splitting at the P, As, S, Se and Br centres. Also the reverse H-H bond reforming process is analyzed. MP2/aug-cc-pVTZ calculations were performed for systems corresponding to different stages of these processes. The sulphur centre in the SFH moiety is analyzed in detail since the potential barrier height for the addition reaction for this species is the lowest of the moieties analyzed here. The results of calculations show that the SFH + H2 → SFH3 reaction in the gas phase is endothermic but it is exothermic in polar solvents.

  16. Comprehensive planning for classification and disposal of solid waste at the industrial parks regarding health and environmental impacts.

    Science.gov (United States)

    Hashemi, Hassan; Pourzamani, Hamidreza; Rahmani Samani, Bahareh

    2014-01-01

    The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without observing environmental regulations leads to short-term pollution and nuisance in the acceptor environment. Also some parts of case study waste were recyclable which is considerable from viewpoint of economical and environmental pollution. Long-term impacts will appear due to improper site selection of disposal from the spatial standpoint. In this way, an approach for site selection using several socioeconomic, physical, and environmental criteria based on multicriteria decision making model (MCDM) is introduced. Health risks and environment pollution such as soil and surface water may be done. It is essential to revise the studied industries layout, particularly those units which produce special waste which should be more cautious. Also stricter enforcement is required as an effective step in reducing the harmful impacts of it.

  17. Comprehensive Planning for Classification and Disposal of Solid Waste at the Industrial Parks regarding Health and Environmental Impacts

    Directory of Open Access Journals (Sweden)

    Hassan Hashemi

    2014-01-01

    Full Text Available The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without observing environmental regulations leads to short-term pollution and nuisance in the acceptor environment. Also some parts of case study waste were recyclable which is considerable from viewpoint of economical and environmental pollution. Long-term impacts will appear due to improper site selection of disposal from the spatial standpoint. In this way, an approach for site selection using several socioeconomic, physical, and environmental criteria based on multicriteria decision making model (MCDM is introduced. Health risks and environment pollution such as soil and surface water may be done. It is essential to revise the studied industries layout, particularly those units which produce special waste which should be more cautious. Also stricter enforcement is required as an effective step in reducing the harmful impacts of it.

  18. Minerals Yearbook, volume II, Area Reports—Domestic

    Science.gov (United States)

    ,

    2017-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  19. Minerals Yearbook, volume III, Area Reports—International

    Science.gov (United States)

    ,

    2017-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  20. Assessment of environmental impact models in natural occurring radionuclides solid wastes disposal from the mineral industry; Avaliacao de modelos de impacto ambiental para deposicao de residuos solidos com radionuclideos naturais em instalacoes minero-industriais

    Energy Technology Data Exchange (ETDEWEB)

    Pontedeiro, Elizabeth May Braga Dulley

    2006-07-15

    This work evaluates the behavior of wastes with naturally occurring radionuclides as generated by the mineral industry and their final disposal in landfills. An integrated methodology is used to predict the performance of an industrial landfill for disposal of wastes containing NORM/TENORM, and to define acceptable amounts that can be disposed at the landfill using long-term environmental assessment. The governing equations for radionuclide transport are solved analytically using the generalized integral transform technique. Results obtained for each compartment of the biogeosphere are validated with experimental results or compared to other classes of solutions. An impact analysis is performed in order to define the potential consequences of a landfill to the environment, considering not only the engineering characteristics of the waste deposit but also the exposure pathways and plausible scenarios in which the contaminants could migrate and reach the environment and the human population. The present work permits the development of a safety approach that can be used to derive quantitative waste acceptance criteria for the disposal of NORM/TENORM waste in landfills. (author)

  1. Aggregate and Mineral Resources - Minerals

    Data.gov (United States)

    NSGIC State | GIS Inventory — This point occurrence data set represents the current mineral and selected energy resources of Utah. The data set coordinates were derived from USGS topographic maps...

  2. Toxic State–Corporate Crimes, Neo-liberalism and Green Criminology: The Hazards and Legacies of the Oil, Chemical and Mineral Industries

    Directory of Open Access Journals (Sweden)

    Vincenzo Ruggiero

    2013-11-01

    Full Text Available This paper uses examples from the history and practices of multi-national and large companies in the oil, chemical and asbestos industries to examine their legal and illegal despoiling and destruction of the environment and impact on human and non-human life. The discussion draws on the literature on green criminology and state-corporate crime and considers measures and arrangements that might mitigate or prevent such damaging acts. This paper is part of ongoing work on green criminology and crimes of the economy. It places these actions and crimes in the context of a global neo-liberal economic system and considers and critiques the distorting impact of the GDP model of ‘economic health’ and its consequences for the environment.

  3. Mineralization of volatile organic compounds (VOCs) over the catalyst CuO-Co3O4-CeO2 and its applications in industrial odor control

    KAUST Repository

    Somekawa, Shouichi

    2011-12-01

    Volatile organic compounds (VOCs) present at ppm levels were decomposed over the catalyst CuO-Co3O4-CeO2 (Cu:Co:Ce = 10:45:45 in mol) in an attempt to scale up for industrial odor control. In addition to enhancing the catalytic activity, CuO-Co3O4 and CeO2 helped, respectively, to maintain the strength of the pelleted catalysts and inhibit their sintering. Using toluene as a VOC model compound, kinetic analysis of the total oxidation to carbon dioxide was conducted. The odor emitted from paint-drying processes could be eliminated effectively using CuO-Co3O4-CeO2 (Cu:Co:Ce = 10:45:45) pelleted catalysts (188 ml) in a large-scale system. © 2011 Elsevier B.V. All rights reserved.

  4. Assessment of radiological impact in mineral industrial plants caused by deposition of wastes with U{sup 238} and/or Th{sup 232} associated

    Energy Technology Data Exchange (ETDEWEB)

    Ladeira, Paula C.; Alves, Rex Nazare, E-mail: rexnazare@ime.eb.b [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Ruperti Junior, Nerbe J., E-mail: nruperti@cnen.gov.b [Comissao Nacional de Energia Nuclear (DIREJ/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Rejeitos Radioativos

    2011-07-01

    The industrial-mining facilities constantly produce, in Brazil and in abroad, wastes from its production, many times containing uranium and/or thorium associated. Due to the large quantities generated, these wastes are usually deposited at the site of the facility, close to the place where they were produced. Since the chains of radioactive U{sup 238} and Th{sup 232} with alpha-emitting radionuclides have long half-life, waste deposits associated with these elements may cause radiological impact on the man and on the environment, even in the long term. Mathematical models are often used to represent the biosphere and the transport of radionuclides near to the surface. Thus, it was decided, through the software {sup M}athematica{sup ,} to present a methodology based on the solution of Bateman equations for the calculation of radiological impact on individuals from the public exposed to contamination. The radiological impact appraisal was carried out considering a scenario of intrusion into landfills containing U{sup 238} and / or Th{sup 232} in post-operational phase of an industrial-mining installation. The critical group examined was represented by farmers who used water from an artesian well for daily consumption and which feed themselves on vegetables locally grown in clay soil. As a result, there was the exposure in pathways evaluated, a minor contribution of dose for ingestion of contaminated water. The conclusion of this work, show us that calculated doses were within the accepted international limits for the intrusion scenario. Parameters associated with mathematical models defining the choice of project to build a landfill for the purpose of deposition, whereas rates of doses can be estimated in each of the scenarios proposed. (author)

  5. Fumarolic minerals

    DEFF Research Database (Denmark)

    Balic Zunic, Tonci; Garavelli, Anna; Jakobsson, Sveinn Peter

    2016-01-01

    The fumarolic mineralogy of the Icelandic active volcanoes, the Tyrrhenian volcanic belt (Italy) and the Aegean active arc (Greece) is investigated, and literature data surveyed in order to define the characteristics of the European fumarolic systems. They show broad diversity of mineral...... associations, with Vesuvius and Vulcano being also among the world localities richest in mineral species. Volcanic systems, which show recession over a longer period, show fumarolic development from the hightemperature alkaline halide/sulphate, calcic sulphate or sulphidic parageneses, synchronous...... fluctuations in activity, illustrated by the example of Vulcano where the high-temperature association appears intermittently. A full survey of the mineral groups and species is given in respect to their importance and appearance in fumarolic associations....

  6. Evaluation of waste management, manufacturing industries, from an environmental standpoint (Case Study: Savojbolagh city Alborz Province

    Directory of Open Access Journals (Sweden)

    mashaalah nikzad

    2016-06-01

    Full Text Available   Introduction and Purpose: The quantity and quality of industrial wastewater is variable owing to the different lines of production and product variety of industry. Meeting the effluent standards requires proper environmental management. The current study aimed to evaluate the industrial wastewater management in Savojbolagh, Alborz, Iran from an environmental perspective in 2013-2014. Methods: This study was cross-sectional. The data were collected through field visits, questionnaire (of Iran's Environmental Protection Agency, and controlling data from industrial plants with more than 50 workers (totally 108 units. The questionnaire included questions about the quantity, quality, and management of wastewater. Based on an environmental perspective, the way of managing industrial wastewater was classified into four index: wastewater production, per capita production, BOD (Biochemical oxygen demand per capita, and COD (Chemical Oxygen Demand per capita which were rated from1 to 6. For each index, a higher score was defined for better management. Results: The wastewater produced by industries was estimated to be 1942 cubic meters per day. Food industry alone produced 59% of the entire industrial wastewater. The industry related to animal slaughtering was shown to have the highest BOD per capita, 320 g/day per every worker; and the cellulose industry enjoyed the highest COD per capita, 561 g/day per every worker. 76% of the industries under investigation had no strategy to reduce the wastewater production. 34% of these industries possessed treatment plants, while only 17% of them were following the effluent discharge standards. The most common method of treated and untreated wastewater disposal was found to be absorbing well. Conclusion: Based on this assessment, the management of wastewater was revealed to be favorable in non-metallic minerals industry, but unfavorable in agriculture industry as the wastewater produced by

  7. Quantification of some elements of nuclear and industrial interest from zircon mineral using neutron activation analysis and passive gamma-ray spectroscopy.

    Science.gov (United States)

    Attallah, M F; Hilal, M A; Moussa, S I

    2017-10-01

    A combined of various nuclear and analytical techniques were used for characterization of Egyptian zircon ore. Neutron activation analysis has been used for determination of the major, minor and trace elements from zircon ore. Non-destructive gamma-ray technique is also used for the radiometric analysis of zircon ore to quantify the natural radionuclides such as (238)U, (235)U, (232)Th, (226)Ra and (40)K. Zircon ore has been characterized by different analytical tools such as Fourier transformer infrared (FTIR), X-ray fluorescence (XRF), powder X-ray diffraction (XRD), and scanning electron microscopy (SEM). In this study, a significant concentration of U, Th and rare earth elements (REEs) has been reported. The obtained results showed that the average activity concentration of (238)U, (235)U, (226)Ra, (232)Th and (40)K are 4771±338, 230±17.1, 3588±125, 982±47.7 and 217±48.5Bq/kg, respectively. The results indicated that 297, 318 and 838mg/Kg for U, Th, REEs, respectively, using NAA. These results are consistent with those obtained by gamma-ray spectroscopy and/or XRF. It can be concluded that zircon ore is a riche with a valuable nuclear materials such as U, Th, Zr, and Hf. It is also containing a REEs of economic and industrial interest. Also, the different radiation hazardous parameters were found much higher than the permissible values. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Rare earth metals influence on morphology of non-metallic inclusions and mechanism of GP240GH and G17CrMo5-5cast steel cracking

    Directory of Open Access Journals (Sweden)

    M. Gajewski

    2009-10-01

    Full Text Available This paper presents results of research carried out in order to specify the influence of the rare earth metals on the morphology of the occuring non-metallic inclusions as well as on the cracking mechanism of GP240GH cast carbon steel and G17CrMo5-5 (0.18%C, 1.2%Cr, 0.53%Mo high temperature cast steel. The tests have been performed on successive industrial melts adding rare earth metals to the ladle during tapping of heat melt from the furnace. It was found that ball-shaped non-metalic inclusions occuring as a result of the rare earth metals influence are heterogenic and they significantly influence the cracking mechanism of Charpy specimens and the impact strength. The morphology of the specimens fracture surface has been substantially changed as a result of the rare earth metals modification. The impact strength of the tested cast carbon steel increased from 100 J/cm2 to ca 155 J/cm2, and the high-temperature cast steel from 30 J/cm2 to ca 100 J/cm2.

  9. Information system of mineral deposits in Slovenia

    Science.gov (United States)

    Hribernik, K.; Rokavec, D.; Šinigioj, J.; Šolar, S.

    2010-03-01

    At the Geologic Survey of Slovenia the need for complex overview and control of the deposits of available non-metallic mineral raw materials and of their exploitations became urgent. In the framework of the Geologic Information System we established the Database of non-metallic mineral deposits comprising all important data of deposits and concessionars. Relational database is built with program package MS Access, but in year 2008 we plan to transfer it on SQL server. In the evidence there is 272 deposits and 200 concessionars. The mineral resources information system of Slovenia, which was started back in 2002, consists of two integrated parts, mentioned relational database of mineral deposits, which relates information in tabular way so that rules of relational algebra can be applied, and geographic information system (GIS), which relates spatial information of deposits. . The complex relationships between objects and the concepts of normalized data structures, lead to the practical informative and useful data model, transparent to the user and to better decision-making by allowing future scenarios to be developed and inspected. Computerized storage, and display system is as already said, developed and managed under the support of Geological Survey of Slovenia, which conducts research on the occurrence, quality, quantity, and availability of mineral resources in order to help the Nation make informed decisions using earth-science information. Information about deposit is stored in records in approximately hundred data fields. A numeric record number uniquely identifies each site. The data fields are grouped under principal categories. Each record comprise elementary data of deposit (name, type, location, prospect, rock), administrative data (concessionar, number of decree in official paper, object of decree, number of contract and its duration) and data of mineral resource produced amount and size of exploration area). The data can also be searched, sorted and

  10. Trace elements and mineral composition of waste produced in the process of combustion of solid fuels in individual household furnaces in the Upper Silesian Industrial Region (Poland

    Directory of Open Access Journals (Sweden)

    Smołka-Danielowska Danuta

    2015-12-01

    Full Text Available This study presents preliminary research results, with regard to the concentration of chosen trace elements (Mn, Cr, Tl, Ni, Cu, Zn, As, Cd, Ba, Pb in waste, which was produced in the process of combustion of solid fuels (hard coal and flotation concentrate of bituminous coal in individual household furnaces in Poland (in the Upper Silesian Industrial Region. 27 samples of ash, 4 samples of hard coal and 2 samples of flotation concentrate of bituminous coal were prepared for the research. Methods such as: ICP-MS, X-ray diffraction by means of the powder method and scanning electron microscopy were used during the research. In the ash samples obtained from the combustion of hard coal, the highest average concentrations were: Mn (1477.7 ppm, Ba (1336.4 ppm and Zn (599.7 ppm. In the samples obtained from the combustion of flotation concentrate of bituminous coal, the highest average concentrations was stated for: Zn (762.4 ppm, Mn (668.5 ppm, Pb (552.1 ppm and Ba (211.7 ppm. Crystalline components were determined by used the X-ray diffraction method and the samples of ash obtained from the combustion of hard coal contained: anhydrite, gypsum, hematite, magnetite, quartz, calcite, mullite, periclase, kaolinite, dolomite, pyrite, sphalerite, galena and feldspars (albite-anorthite. The samples of ash obtained from the combustion of flotation concentrate of bituminous coal contain: pyrite, quartz, potassium feldspar, muscovite and kaolinite. The scanning electron microscope analysis enabled the identification of the chemical composition of single ash grains and determined their morphology (aluminosilicate forms, substance PbS and ZnS, oxides of Ni, Cu and Mn, monazite, xenotime.

  11. Comparative study of cost-benefit integrated system of water spary with industrial ventilation and bag filters in a minerals processing company

    Directory of Open Access Journals (Sweden)

    Morteza Babaei

    2016-06-01

    Full Text Available Introduction: Control of fugitative dust from mining process and application of an appropriate and economical system for dust collecting is essential. The goal of this study was cost-benefit analysis of an integrated systems and compare to bag filter in a crushing plant of a mining company. Methods: A local exhaust ventilation system for capture of emitted particlees, a water spray for dust suppresion at sources and parallel Stairmand model cyclones as dust colletor were designed and installed based on the standards and guidelines. Then, efficiency of wetting and industrial ventilation system for control of ambient dust personal exposure and environmental emission have evaluated as integrated and alone. Finally, cost-benefit analysis of this system was compared to bag filter. Results: The efficiency of this system for control personal exposure repairable particles and emitted dust to ambient air was 87% and 95% for plant 1 and 88% and 95% for plant 2, respectively. The concentration of emitted emitted dust from stack to environment were 121.28 mg/m3 and 112/68 mg/m3 for plant 1 and 2, respectively. The capital, operational and maintence costs of this option was 217 and 0.992 billion rials lower than bag filter. Also, annuall collected dust by cyclones was worth 518 million rial. Conclusion: According to results, integrated system had a significant impact on emitted dust in workplace and environment. The economical analysis domonstrated 73% and 80% savings in capital and operational costs compared to bag filter. Total costs of implented project will be compensated at 220 day with recovered dusts, therefore, in the same condition, it can be suggested as the favourable and economical solution.

  12. Experimental and numerical investigation of concrete structures with metal and non-metal reinforcement at impulse loadings

    Science.gov (United States)

    Radchenko, P. A.; Batuev, S. P.; Radchenko, A. V.; Plevkov, V. S.; Kudyakov, K. L.

    2016-11-01

    Manufacturing durable and high-strength concrete structures has always been a relevant objective. Therefore special attention has been paid to non-metallic composite reinforcement. This paper considers experimental and numerical studies of nature of fracture and crack formation in concrete beams with rod composite reinforcement. Fiber glass rods, 6 mm in diameter, have been used as composite reinforcement. Concrete elements have been tested under dynamic load using special pile driver. The obtained results include patterns of fracture and crack formation, maximum load value and maximum element deflection. Comparative analysis of numerical and experimental studies has been held.

  13. Influence of Low-Alloy Cast Steel Modification on Primary Structure Refinement, Type and Shape of Non-Metallic Inclusions

    Directory of Open Access Journals (Sweden)

    Bartocha D.

    2015-04-01

    Full Text Available In the article there are presented methods and results of investigation which main aim were determination of influence of melting technology (gas extraction, vacuum refining, slag refining and extraction, deoxidation and degassing and type of used modifiers on the type and shape of non-metallic inclusions and the primary structure refining. Low alloy cast steel melted in laboratory conditions, in an inductive furnace was investigated. Additions of FeNb, FeV, FeTi and FeZr modifiers were applied. The contents of oxygen and nitrogen in obtained cast steel were determined.

  14. Bioleaching of Minerals

    Energy Technology Data Exchange (ETDEWEB)

    F. Roberto

    2002-02-01

    Bioleaching is the term used to describe the microbial dissolution of metals from minerals. The commercial bioleaching of metals, particularly those hosted in sulfide minerals, is supported by the technical disciplines of biohydrometallurgy, hydrometallurgy, pyrometallurgy, chemistry, electrochemistry, and chemical engineering. The study of the natural weathering of these same minerals, above and below ground, is also linked to the fields of geomicrobiology and biogeochemistry. Studies of abandoned and disused mines indicate that the alterations of the natural environment due to man's activities leave as remnants microbiological activity that continues the biologically mediated release of metals from the host rock (acid rock drainage; ARD). A significant fraction of the world's copper, gold and uranium is now recovered by exploiting native or introduced microbial communities. While some members of these unique communities have been extensively studied for the past 50 years, our knowledge of the composition of these communities, and the function of the individual species present remains relatively limited. Nevertheless, bioleaching represents a major strategy in mineral resource recovery whose importance will increase as ore reserves decline in quality, become more difficult to process (due to increased depth, increased need for comminution, for example), and as environmental considerations eliminate traditional physical processes such as smelting, which have served the mining industry for hundreds of years.

  15. Perencanaan Strategik SBU Mineral PT Sucofindo (Persero

    Directory of Open Access Journals (Sweden)

    Suprapto Suprapto

    2017-05-01

    Full Text Available Strategic planning requires an organization in the face of today's business competition and a more complex future. Likewise, Mineral Gas Station also requires this strategic planning as a newly formed business unit of 2015. Therefore, the company analyzed its internal and external factors as well as a future review of the mineral service industry to stay afloat, grow and develop. The objectives of this study were to identify the internal performance and core competencies of Mineral Gas Station, to identify the external macro environment condition and external micro intensity of mineral service industry competition, to map the current position of the company, to recommend appropriate business strategy in facing competition pressure, and to develop the objectives and program of the company. This research used descriptive and quantitative analysis methods with a purposive sampling technique. The results show that the position of Mineral Gas Station on the intensity of mineral service competition is 'moderate' and is in quadrant of 'grow and build'. Therefore, the appropriate strategy is intensive strategy (market penetration, market development and product development. Mineral Gas Station require to conduct customer satisfaction surveys related to customer perspectives which becomes the most important strategic factor with a focus on customer complaint factor. Further research is needed by involving all external parties so that the results will be more independent.Keywords: mineral services, strategic planning, competition, mineral gas station, SucofindoABSTRAKPerencanaan strategik dibutuhkan organisasi dalam menghadapi persaingan bisnis saat ini dan masa depan yang semakin komplek. Demikian juga yang dibutuhkan SBU Mineral sebagai unit bisnis yang baru terbentuk 2015, dengan menganalisis faktor internal dan ekternal perusahaan serta tinjauan masa depan industri jasa mineral untuk tetap bertahan, tumbuh dan berkembang. Tujuan penelitian ini adalah

  16. Minerals yearbook. Volume 2. Area reports: Domestic, 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    This edition of the Minerals Yearbook discusses the performance of the worldwide minerals industry during 1991 and provides background information to assist in interpreting that performance. Volume II, Area Reports: Domestic, contains chapters on the minerals industry of each of the 50 States, Puerto Rico, Northern Marianas, Island Possessions, and Trust Territory. This volume also has a chapter on survey methods used in data collection, including a statistical summary of domestic nonfuel minerals.

  17. Aggregates from mineral wastes

    Directory of Open Access Journals (Sweden)

    Baic Ireneusz

    2016-01-01

    Full Text Available The problem concerning the growing demand for natural aggregates and the need to limit costs, including transportation from remote deposits, cause the increase in growth of interest in aggregates from mineral wastes as well as in technologies of their production and recovery. The paper presents the issue related to the group of aggregates other than natural. A common name is proposed for such material: “alternative aggregates”. The name seems to be fully justified due to adequacy of this term because of this raw materials origin and role, in comparison to the meaning of natural aggregates based on gravel and sand as well as crushed stones. The paper presents characteristics of the market and basic application of aggregates produced from mineral wastes, generated in the mining, power and metallurgical industries as well as material from demolished objects.

  18. Microbially mediated mineral carbonation

    Science.gov (United States)

    Power, I. M.; Wilson, S. A.; Dipple, G. M.; Southam, G.

    2010-12-01

    Mineral carbonation involves silicate dissolution and carbonate precipitation, which are both natural processes that microorganisms are able to mediate in near surface environments (Ferris et al., 1994; Eq. 1). (Ca,Mg)SiO3 + 2H2CO3 + H2O → (Ca,Mg)CO3 + H2O + H4SiO4 + O2 (1) Cyanobacteria are photoautotrophs with cell surface characteristics and metabolic processes involving inorganic carbon that can induce carbonate precipitation. This occurs partly by concentrating cations within their net-negative cell envelope and through the alkalinization of their microenvironment (Thompson & Ferris, 1990). Regions with mafic and ultramafic bedrock, such as near Atlin, British Columbia, Canada, represent the best potential sources of feedstocks for mineral carbonation. The hydromagnesite playas near Atlin are a natural biogeochemical model for the carbonation of magnesium silicate minerals (Power et al., 2009). Field-based studies at Atlin and corroborating laboratory experiments demonstrate the ability of a microbial consortium dominated by filamentous cyanobacteria to induce the precipitation of carbonate minerals. Phototrophic microbes, such as cyanobacteria, have been proposed as a means for producing biodiesel and other value added products because of their efficiency as solar collectors and low requirement for valuable, cultivable land in comparison to crops (Dismukes et al., 2008). Carbonate precipitation and biomass production could be facilitated using specifically designed ponds to collect waters rich in dissolved cations (e.g., Mg2+ and Ca2+), which would allow for evapoconcentration and provide an appropriate environment for growth of cyanobacteria. Microbially mediated carbonate precipitation does not require large quantities of energy or chemicals needed for industrial systems that have been proposed for rapid carbon capture and storage via mineral carbonation (e.g., Lackner et al., 1995). Therefore, this biogeochemical approach may represent a readily

  19. Study on Non-Metallic Inclusions in Laser-Welded TRIP-Aided Nb-Microalloyed Steel

    Directory of Open Access Journals (Sweden)

    Grajcar A.

    2014-10-01

    Full Text Available The work concerns the studies on non-metallic inclusions occuring in laser-welded Si-Al TRIP steel containing Nb and Ti microadditions. Laser welding tests of 2 mm thick thermomechanically rolled sheets were carried out using keyhole welding and a solid-state laser. The results of laser welding in the air atmosphere for the heat input value of 0.048 kJ/mm are included. The distribution, type and chemical composition of non-metallic inclusions formed in the base metal, heat-affected zone, and fusion zone are analysed in detail. It was found that the base metal contains rare, fine oxysulphides. Their chemical composition was modified by rare earth elements. Numerous oxide inclusions of a various size and a chemical composition occur in the fusion zone. The dependence between a size of particles and their chemical composition was observed. A microstructure of steel was assessed using light microscopy and scanning electron microscopy techniques.

  20. AES and SIMS analysis of non-metallic inclusions in a low-carbon chromium-steel.

    Science.gov (United States)

    Gammer, Katharina; Rosner, M; Poeckl, G; Hutter, H

    2003-05-01

    In the final step of secondary metallurgical steel processing, calcium is added. Besides Mg, Ca is the most powerful deoxidiser and desulfurisation agent. It reacts with dissolved oxygen and sulfur and reduces oxides and sulfides thereby forming non-metallic inclusions. Within this paper we present the analysis of such inclusions in a low-carbon chromium-steel. Depending on the time of quenching of the steel sample, different structures were revealed by REM, Auger and SIMS: If the steel was quenched immediately after Ca-addition, non-metallic inclusions that appeared to have "cavities" could be detected with SEM. SIMS investigations of these particles showed ring-shaped structures and revealed that the ring is made up of Al, Ca, Mg, O and S. No secondary ions however could be retrieved from the core inside the ring, thus leaving the nature of the "cavities" unclear. If the steel sample was quenched 3 min after Ca addition, inclusions did not have a ring-shaped structure but a compact one.

  1. Strategic Minerals of India

    Directory of Open Access Journals (Sweden)

    D. N. Wadia

    1952-09-01

    Full Text Available The state of disequilibrium in the country's mineral economy may not be harmful in time of international peace, but is a source of double danger to national security in a war emergency, when imports of essential commodities, e.g., petroleum may be jeopardised and the off-take of credit earning exports may be stopped. A healthy economy can be achieved by balancing as near as possible, the surpluses against deficits through building up civilian industrial power of production of substitute for some deficient and sub-marginal commodities and stockpiling of others.

  2. Environmental Tax Reforms and Mitigation for Energy-intensive Industries: Some Lessons from European Experience

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    2009-01-01

    The purpose of this paper is to analyse in more detail the international experiences in applying carbon-energy taxation in two important energy-intensive sectors; iron and steel, as well as non-metallic mineral products (where cement is the most significant subsector)....

  3. Economic and ecologic importance of the non - metalic deposits in basalt maars of Southern Slovakia

    Directory of Open Access Journals (Sweden)

    Vass Dionýz

    1998-03-01

    Full Text Available By investigation of the basalt maars infill in Luèenská kotlina Depression the diatomite and alginite deposits have been found. Both maars belong to Podreèany basalt formation, Pontian (Late Miocene in age. By technological investigation it was proved the diatomite can be used in the building trade as raw materil for light tiles convenient especially for the construction of the saddle roof with attic appatments. The alginite can be used in the agriculture and horticulture, as a fertiliser becouse of humus, nutritive end same trace elements, a desodorant in livestoc feedlots, a water and nutritive elements trap to distribute them for the growing plants. The alginite can be used as well as in pharmacy and in different industrial branches. Both deposits are of high significance for the ecology and the nature protection.

  4. Mineralization of Carbon Dioxide: Literature Review

    Energy Technology Data Exchange (ETDEWEB)

    Romanov, V; Soong, Y; Carney, C; Rush, G; Nielsen, B; O' Connor, W

    2015-01-01

    CCS research has been focused on CO2 storage in geologic formations, with many potential risks. An alternative to conventional geologic storage is carbon mineralization, where CO2 is reacted with metal cations to form carbonate minerals. Mineralization methods can be broadly divided into two categories: in situ and ex situ. In situ mineralization, or mineral trapping, is a component of underground geologic sequestration, in which a portion of the injected CO2 reacts with alkaline rock present in the target formation to form solid carbonate species. In ex situ mineralization, the carbonation reaction occurs above ground, within a separate reactor or industrial process. This literature review is meant to provide an update on the current status of research on CO2 mineralization. 2

  5. Hydrothermal minerals

    Digital Repository Service at National Institute of Oceanography (India)

    Nath, B.N.

    -floor hydrothermal processes involving free circulation of seawater through ocean crust as convection. Heat flow, seafloor fracturing, permeability and fluid composition are the parameters governing the type and extent of mineralization. The chimney like... stream_size 23365 stream_content_type text/plain stream_name Refresher_Course_Mar_Geol_Geophys_2007_Lecture_Notes_78.pdf.txt stream_source_info Refresher_Course_Mar_Geol_Geophys_2007_Lecture_Notes_78.pdf.txt Content-Encoding UTF-8...

  6. Effect of Non-metallic Inclusions in Fe-Al-Ti-O-N-S Alloy on Grain Size

    Science.gov (United States)

    Choi, Wonjin; Matsuura, Hiroyuki; Tsukihashi, Fumitaka

    2016-06-01

    The effect of characteristics of non-metallic inclusions in Fe-Al-Ti-O-N-S alloys with various compositions at 1473 K (1200 °C) on the microstructure was studied. The ASTM grain size number was determined in as-cast and heated samples by the optical microscopy, and the inclusion types in each sample were determined from composition analysis by field-emission scanning electron microscope with energy-dispersive spectroscopy. The TiN-based inclusions certainly had a positive effect on the grain refinement. On the other hand, TiS-based inclusions exhibited no influence on the decrease of grain size. In addition, the formation and evolution behavior of inclusions by heating solid-state Fe-Al-Ti-O-N-S alloys with those locations were clarified. A different change of inclusions in alloys was observed depending on the distribution and composition of inclusions.

  7. Detection of Surface and Subsurface Cracks in Metallic and Non-Metallic Materials Using a Complementary Split-Ring Resonator

    Directory of Open Access Journals (Sweden)

    Ali Albishi

    2014-10-01

    Full Text Available Available microwave techniques for crack detection have some challenges, such as design complexity and working at a high frequency. These challenges make the sensing apparatus design complex and relatively very expensive. This paper presents a simple method for surface and subsurface crack detection in metallic and non-metallic materials based on complementary split-ring resonators (CSRRs. A CSRR sensor can be patterned on the ground plane of a microstrip line and fabricated using printed circuit board technology. Compared to available microwave techniques for sub-millimeter crack detection, the methods presented here show distinct advantages, such as high spatial resolution, high sensitivity and design simplicity. The response of the CSRR as a sensor for crack detection is studied and analysed numerically. Experimental validations are also presented.

  8. Standard practice for process compensated resonance testing via swept sine input for metallic and Non-Metallic parts

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice describes a general procedure for using the process compensated resonance testing (PCRT) via swept sine input method to identify metallic and non-metallic parts’ resonant pattern differences that can be used to indentify parts with anomalies causing deficiencies in the expected performance of the part in service. This practice is intended for use with instruments capable of exciting, measuring, recording, and analyzing multiple whole body mechanical vibration resonant frequencies within parts exhibiting acoustical ringing in the audio, or ultrasonic, resonant frequency ranges, or both. PCRT is used in the presence of manufacturing process variance to distinguish acceptable parts from those containing significant anomalies in physical characteristics expected to significantly alter the performance. Such physical characteristics include, but are not limited to, cracks, voids, porosity, shrink, inclusions, discontinuities, grain and crystalline structure differences, density related anomalies...

  9. The uncertainties calculation of acoustic method for measurement of dissipative properties of heterogeneous non-metallic materials

    Directory of Open Access Journals (Sweden)

    Мaryna O. Golofeyeva

    2015-12-01

    Full Text Available The effective use of heterogeneous non-metallic materials and structures needs measurement of reliable values of dissipation characteristics, as well as common factors of their change during the loading process. Aim: The aim of this study is to prepare the budget for measurement uncertainty of dissipative properties of composite materials. Materials and Methods: The method used to study the vibrational energy dissipation characteristics based on coupling of vibrations damping decrement and acoustic velocity in a non-metallic heterogeneous material is reviewed. The proposed method allows finding the dependence of damping on vibrations amplitude and frequency of strain-stress state of material. Results: Research of the accuracy of measurement method during the definition of decrement attenuation of fluctuations in synthegran was performed. The international approach for evaluation of measurements quality is used. It includes the common practice international rules for uncertainty expression and their summation. These rules are used as internationally acknowledged confidence measure to the measurement results, which includes testing. The uncertainties budgeting of acoustic method for measurement of dissipative properties of materials were compiled. Conclusions: It was defined that there are two groups of reasons resulting in errors during measurement of materials dissipative properties. The first group of errors contains of parameters changing of calibrated bump in tolerance limits, displacement of sensor in repeated placement to measurement point, layer thickness variation of contact agent because of irregular hold-down of resolvers to control surface, inaccuracy in reading and etc. The second group of errors is linked with density and Poisson’s ratio measurement errors, distance between sensors, time difference between signals of vibroacoustic sensors.

  10. Enhanced hydrogen desorption properties of magnesium hydride by coupling non-metal doping and nano-confinement

    Science.gov (United States)

    He, Daliang; Wang, Yulong; Wu, Chengzhang; Li, Qian; Ding, Weizhong; Sun, Chenghua

    2015-12-01

    Magnesium hydride (MgH2) offers excellent capacity to store hydrogen, but it suffers from the high desorption temperature (>283 °C for starting release hydrogen). In this work, we calculated the hydrogen desorption energy of Mg76H152 clusters with/without non-metal dopants by density functional theory method. Phosphorus (P), as identified as the best dopant, can reduce the reaction energy for releasing one hydrogen molecule from 0.75 eV (bulk MgH2) to 0.20 eV. Inspired by the calculation, P-doped ordered mesoporous carbon (CMK-3) was synthesized by one-step method and employed as the scaffold for loading MgH2 nanoparticles, forming MgH2@P/CMK-3. Element analysis shows that phosphorus dopants have been incorporated into the CMK-3 scaffold and magnesium and phosphorus elements are well-distributed in carbon scaffold hosts. Tests of hydrogen desorption confirmed that P-doping can remarkably enhance the hydrogen release properties of nanoconfined MgH2 at low temperature, specifically ˜1.5 wt. % H2 released from MgH2@P/CMK-3 below 200 °C. This work, based on the combination of computational calculations and experimental studies, demonstrated that the combined approach of non-metal doping and nano-confinement is promising for enhancing the hydrogen desorption properties of MgH2, which provides a strategy to address the challenge of hydrogen desorption from MgH2 at mild operational conditions.

  11. Problems and countermeasures on main mineral resource sustainable supply in northeastern China

    Institute of Scientific and Technical Information of China (English)

    Chang LIU; Shouyi LI; Jian GUAN; Tingting ZHANG; Ying CHU; Jing ZHANG

    2008-01-01

    northeastern China is an important old industrial base in China. Mineral resources are the foundation of industry development. However, because of long-term exploitation of mineral resources in northeastern China, the mineral resources reserves decrease gradually and some mineral resources are nearly exhausted, which restricts revitalization and sustainable development of the northeast old industrial base. On the basis of the comprehensive analysis of development and utilization status of mineral resources and supply and demand situation of main mineral resources in northeastern China, the authors put forward countermeasures on main mineral resources sustainable supply in northeastern China.

  12. Agglomeration of Non-metallic Inclusions at the Steel/Ar Interface: Model Application

    Science.gov (United States)

    Mu, Wangzhong; Dogan, Neslihan; Coley, Kenneth S.

    2017-08-01

    Inclusion agglomeration is an important element in several industrial problems during steelmaking, such as nozzle clogging. In parallel work by the authors, a revised Kralchevsky-Paunov model has been established and the performance of this model has been validated against the experimental data from in-situ observations using confocal laser scanning microscopy. In this work, the revised model has been applied to quantitatively evaluate the attractive capillary force for the agglomeration of various inclusions at the interface between Ar and liquid iron/steel. A parametric study of the effects on the capillary force of the inclusion density, contact angle between the inclusion and liquid steel, and the surface tension of the liquid metal are quantitatively investigated. The results show that inclusion density and contact angle have a more marked effect on the capillary force than surface tension of liquid metal. Moreover, the inclusion agglomeration behavior in the liquid iron/steel matrix is discussed. The coagulation coefficient of various inclusions is calculated. Both the calculation results of the attractive capillary force of inclusions at the interface between Ar and liquid iron/steel and coagulation coefficient of inclusions in the liquid iron/steel matrix can offer a close agreement; moreover, the order of magnitude of inclusion agglomeration tendency is suggested. By using the coagulation coefficient, the inclusion collision volume and collision rate are calculated and the effects of inclusion composition, size, and number density are investigated. The evaluation results show that the tendency for affecting inclusion collision is inclusion number density > inclusion size > inclusion composition.

  13. Radionuclide contents and radiological risk to the population due to raw minerals and soil samples from the mining sites of quality ceramic and pottery industries in Akwa Ibom, Nigeria; Contenu en radionucleides et risque radiologique aux populations d'echantillons de sols et de mineraux bruts issus de sites miniers des industries de la poterie et de la ceramique de qualite a Akwa Ibom, Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Jibiri, N.N.; Esen, N.U. [Radiation and Health Physics Research Laboratory, Department of Physics, University of Ibadan, Ibadan (Nigeria)

    2011-01-15

    Samples of domestically produced industrial raw minerals and soil samples from three mining sites of quality ceramic/smelting and pottery industries in Akwa Ibom, Nigeria, were collected and analyzed for their {sup 226}Ra, {sup 232}Th and {sup 40}K contents using gamma-ray spectroscopy. The range of activity concentrations of the radionuclides in the industrial raw minerals were 17.55 {+-} 1.63 to 80.99 {+-} 2.61 Bq.kg{sup -1} for {sup 226}Ra, 7.64 {+-} 0.77 to 23.94 {+-} 0.92 Bq.kg{sup -1} for {sup 232}Th and 63.22 {+-} 3.43 to 503.90 {+-} 5.69 Bq.kg{sup -1} for {sup 40}K, while in the soil samples they varied from 2.87 to 34.78 Bq.kg{sup -1}, 7.02 to 24.47 Bq.kg{sup -1} and 7.05 to 162.81 Bq.kg{sup -1} for {sup 226}Ra, {sup 232}Th and {sup 40}K, respectively. These results, along with the estimated absorbed dose rates, annual effective dose rates, radium equivalent (Ra{sub eq}), external hazard index (H{sub ex}), internal hazard index (H{sub in}) and representative of the gamma index (I{gamma}r) are presented. The results obtained were below the internationally accepted safe limits. Therefore, the analyzed samples could be used in the local industries in the area as component raw materials and/or as building materials. Also, the mining activities of these minerals in the area have not significantly affected the natural radiation dose levels in the area, hence the resulting dose to the population is therefore considered generally low. (authors)

  14. Mining and minerals policy: 1976 bicentennial edition

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    The report is organized into three basic parts. The first part, the Executive Summary, provides a brief description of the major topics and lists the issues and recommendations. The report then is divided into two sections. Section I, Summary, is comprised of three chapters: Increased Energy Security; Metals and Nonmetallic Minerals; and Trends and Events. Section II, Issues in Energy and Minerals Policy, is comprised of seven chapters: Federal Leasing; The Federal Role in Reducing the Fiscal Impacts of Energy Development; Availability of Federal Lands for Mineral Exploration and Development; Environmental Issues and the Mineral Industry; Developments in International Minerals Trade and Investment; Ocean Mining; and The Development of New Tools for Energy and Minerals Policy Analysis. (MCW)

  15. Clay minerals in pollution control

    Energy Technology Data Exchange (ETDEWEB)

    Tateo, F. [Consiglio Nazionale delle Ricerche, Istituto di Ricerca sulle Argille, Tito Scalo, PZ (Italy)

    2000-07-01

    Clay minerals are fundamental constituents of life, not only as possible actors in the development of life on the Earth (Cairns-Smith and Hartman, 1986), but mainly because they are essential constituents of soils, the interface between the solid planet and the continental biosphere. Many, many authors have devoted themselves to the study of clays and clay minerals since the publication of the early modern studies by Grim (1953, 1962) and Millot (1964). In those years two very important associations were established in Europe (Association Internationale pour l'Etude des Argiles, AIPEA) and in the USA (Clay Mineral Society, CMS). The importance of these societies is to put together people that work in very different fields (agronomy, geology, geochemistry, industry, etc.), but with a common language (clays), very useful in scientific work. Currently excellent texts are being published, but introductory notes are also available on the web (Schroeder, 1998).

  16. 中国矿产资源行业并购对股东财富的影响研究%Research on Impact of Chinese Mineral Resources Industry Mergers and Acquisitions on Shareholder Wealth

    Institute of Scientific and Technical Information of China (English)

    彭云艳; 王志磊

    2012-01-01

    With increasing mature of China's stock market, mergers and acquisitions play an increasingly important role in the capital market. Compared with the slow recovery of the global mergers and acquisitions, Chinese M & A set off a new round of high tide in 2011. In 2011, The M & A trading volume which was completed by China energy and mineral industries reached 153, accounting for 13.2% of the total mergers and acquisitions; M & A transaction amount reached$ 21.983 billion, accounting for 32.8% of the total mergers and acquisitions. In this paper, using the event method, short-term M & A performance of listed companies of China mineral resources during 2005-2011 was analyzed from the perspective of shareholder wealth. Through the study of listed companies' excess rate of return within window period [-5,5] occurred by M & A event, it finds shareholder wealth of M & A companies in M & A window period only has a small amount of increase before and after two days of declaration, and it has been presented downward trend after this, which shows M & A event does not form a positive impact on shareholder wealth. This paper attempts to make a further explanation from the stock market itself, aims to illustrate China's stock market exists short-term speculation.%随着我国股票市场的日趋成熟,并购在资本市场中扮演越来越重要的角色.同全球并购的缓慢复苏相比,2011年中国却并购掀起了新一轮的高潮.2011年中国能源及矿产行业完成的并购交易数量为153起,占并购总量的13.2%;并购交易金额高速219.83亿美元,占并购总额的32.8%.本文运用事件法,从股东财富的角度分析了2005-2011年间中国矿产资源类上市公司的短期并购绩效.通过对并购事件发生的窗口期[-5,5]内上市公司的超额收益率的研究发现并购公司在并购窗口期内的股东财富仅仅在宣告日前后两天有少量的增加,此后一直呈现下降的趋势.说明并购事件并未对

  17. Role of minerals in animal health disorders

    Directory of Open Access Journals (Sweden)

    Sinovec Zlatan J.

    2005-01-01

    Full Text Available All mineral matter, essential or non-essential, can have a significant influence on production results and the health of animals, if large quantities of them are present in a feed ration. A maximally tolerant content depends on the animal specie and category. Many factors, such as physiological status (growth, lactation, etc., nutritive status, content and ratio of nutritive matter in the ration, duration of exposure, and the biological level of utilization of elements, also affect the maximally tolerant content of mineral matter in feed. The content of certain mineral matter in plant feed significantly depends on the soil factor, as well as the content and level of utilization of mineral matter from the soil. Mn, Se and Mo can be present in plant feed in such quantities as to induce toxicosis. Industrial contaminants, Cd, Pb or F, can contaminate plants, in particular their leaves, in quantities which lead to the appearance of clinical signs of conventional toxicosis. Moreover, natural water can contain large quantities of S, F, Na, Mg, or Fe, and certain mineral matter can get into water through industrial waste. In addition to the above, it is possible to cause unwanted effects through the frequent, but primarily unprofessional use of mineral additives, since it is extremely important, besides meeting the mineral requirements of each individual element, to secure a ratio among the mineral matter themselves as well as with other nutritive matter. Mineral matter present in food are in mutual interference, and these relations can be synergistic or antagonistic. The sufficiency of a large number of mineral matter has a negative effect on the utilization of other matter (conditional and/or border deficiency, while certain elements cause the clinical appearance of toxic effects. The accidental intake of large quantities of certain mineral matter is revealed as clinical signs of acute toxicosis, which is very different from chronic effects caused by

  18. Effect of Calcium Treatment on Non-Metallic Inclusions in Ultra-Low Oxygen Steel Refined by High Basicity High Al2O3 Sla

    Institute of Scientific and Technical Information of China (English)

    YANG Jun; WANG Xin-hua; JIANG Min; WANG Wan-jun

    2011-01-01

    The influence of calcium treatment on non-metallic inclusions had been studied when control technology of refining top slag in ladle furnace was used in ultra-low oxygen steelmaking. A sufficient amount aluminium was added to experimental heats for final

  19. Effect of the structural parameters changes in the multi-strand tundish on the non-metallic inclusions distribution and separation

    Directory of Open Access Journals (Sweden)

    M. Warzecha

    2014-10-01

    Full Text Available The aim of presented studies was to investigate the fluid flow change and non-metallic inclusions removal changes due to tundish construction modifications. In presented study, numerical simulations were used. Numerical simulations are carried out with the finite-volume commercial code ANSYS Fluent. Steady-state casting conditions for the flow structure and the inclusions removal process are analysed.

  20. Study on industrial transformation of mineral-rich areas from the perspective of new urbanization:a case study of Yulin city%新型城镇化视角下矿产资源富集区产业转型研究∗--以陕西榆林为例

    Institute of Scientific and Technical Information of China (English)

    贾县民; 杨维霞

    2016-01-01

    矿产资源富集区的新型城镇化建设必须以产业转型为基础。结合能矿重镇陕西榆林为例,构建了“1334”产业转型路径,即以建立新型城镇化下的现代产业体系为目标;坚持低碳发展、循环发展和绿色发展“三原则”;调整产业结构、优化产业布局、转变发展方式为转型“三手段”;重点发展煤炭产业集群、战略新兴产业、现代农业和现代服务业“四大重点产业”。论文分析了产业转型具体发展路径,给出了政策建议。%The new urbanization construction of mineral-rich areas must be based on the in-dustrial transformation.Taking the Yulin city as an example,this paper constructs the"1334"in-dustrial transformation path. Namely,to build a modern industrial system based on new urbani-zation as the goal;adhering to the low carbon development,cycle development and green devel-opment as three principles:adj usting the industrial structure,optimizing the industrial layout, changing the development mode as three measures;taking the development of energy chemical industries,strategic emerging industry,modern agriculture and modern service industry as four major industry. This paper analyzes the specific development path of industrial transformation, and gives the policy recommendations.

  1. Global nonfuel mineral exploration trends 2001-2015

    Science.gov (United States)

    Karl, Nick; Wilburn, David R.

    2017-01-01

    The mission of the U.S. Geological Survey (USGS) National Minerals Information Center (NMIC) is to collect, analyze and disseminate information on the domestic and international supply of and demand for minerals and mineral materials essential to the U.S. economy and national security. Understanding mineral exploration activities and trends assists government policy makers, minerals industry decision makers and research entities in identifying where future sources of mineral supply are likely to be discovered, the amount and type of these resources and factors that may affect exploration and development.

  2. Mineral fibres and cancer.

    Science.gov (United States)

    McDonald, J C

    1984-04-01

    A synthesis is presented of the salient findings to date from laboratory and epidemiological research, on the health effects of asbestos and other natural and man-made mineral fibres. Experimental evidence suggests that all mineral fibres are capable of causing fibrosis and malignancy, with chrysotile at least as pathogenic as other fibres. However, penetration, retention and phagocytosis are affected by size and shape and reactivity and durability by physico-chemical properties. Thus it is not surprising that in man the results of exposure vary considerably with fibre type and industrial process. A considerable body of evidence suggests that chrysotile has seldom, if ever, caused peritoneal mesothelioma and that the great majority of pleural mesotheliomas are also attributable to crocidolite or amosite. Without more reliable information on intensity and duration of exposure by fibre type, the epidemiological evidence on this point cannot be wholly conclusive. There are stronger grounds from a limited number of cohort studies for believing that in relation to estimated exposure, the risk of lung cancer has been much higher in textile plants than in fibre production or in the manufacture of friction products, with asbestos-cement plants somewhere in between. The data on man-made fibre production remains equivocal. It is concluded that attempts to regulate asbestos without regard for fibre type, although perhaps adequate for lung cancer and fibrosis, may do little to reduce the risk of mesothelioma. The search for safe fibre substitutes for asbestos will remain difficult until the parameters of pathogenicity are better understood.

  3. Deformation and fracture properties of metals with non-metallic inclusions; Verformung und Bruch von Metallen mit nichtmetallischen Einschluessen

    Energy Technology Data Exchange (ETDEWEB)

    Schmauder, S.; Soppa, E. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt

    1998-12-31

    Microstructural effects due to formation of non-uniform lines of non-metallic inclusions in the matrix are examined with respect to their macro-, meso-, and micromechanical effects in the alloy Al(6061) reinforced by SiC inclusions. A comparative analysis of results obtained with various microstructures reveals essential differences in the formation of shear bands, stress peaks, and strain concentrations in the material structure. The maxima and the distribution of those field variables are determined not only by the arrangement of inclusions clusters in the stringers but also depend on the presence and number of single-particle inclusions in pure matrix material. The banding of the microstructure causes a strongly anisotropic behaviour in terms of stress and strain distributions. (orig./CB) [Deutsch] In diesem Beitrag werden Gefuegeeinfluesse aufgrund unterschiedlich starker zeiliger Anordnungen der Teilchen in der Matrix im Hinblick auf ihre makro-, meso- und mikromechanischen Auswirkungen am Beispiel einer SiC-teilchenverstaerkten Aluminiumlegierung Al(6061) untersucht. Ein Vergleich der Ergebnisse verschiedener Gefuege zeigt wesentliche Unterschiede hinsichtlich der Ausbildung von Scherbaendern, Spannungsspitzen und von Dehnungskonzentrationen im Werkstoffgefuege. Die Maxima und die Verteilung dieser Feldgroessen sind nicht nur abhaengig davon, wie die Teilchen in den Zeilen angeordnet sind, sondern auch davon, ob einzelne Teilchen in reinen Matrixbereichen vorhanden sind. Die Zeiligkeit des Gefueges fuehrt zu einem stark anisotropen Verhalten hinsichtlich Spannungs- und Dehnungsverteilungen. (orig.)

  4. Assessment of Different Turbulence Models for the Motion of Non-metallic Inclusion in Induction Crucible Furnace

    Science.gov (United States)

    Barati, H.; Wu, M.; Kharicha, A.; Ludwig, A.

    2016-07-01

    Turbulent fluid flow due to the electromagnetic forces in induction crucible furnace (ICF) is modeled using k-ɛ, k-ω SST and Large Eddy Simulation (LES) turbulence models. Fluid flow patterns calculated by different turbulence models and their effects on the motion of non-metallic inclusions (NMI) in the bulk melt have been investigated. Results show that the conventional k-ɛ model cannot solve the transient flow in ICF properly. With k-ω model transient flow and oscillation behavior of the flow pattern can be solved, and the motion of NMI can be tracked fairly well. LES model delivers the best modeling result on both details of the transient flow pattern and motion trajectories of NMI without the limitation of NMI size. The drawback of LES model is the long calculation time. Therefore, for general purpose to estimate the dynamic behavior of NMI in ICF both k-ω SST and LES are recommended. For the precise calculation of the motion of NMI smaller than 10 μm only LES model is appropriate.

  5. Effectiveness of Shot Peening In Suppressing Fatigue Cracking At Non-Metallic Inclusions In Udimet(Registered Trademark)720

    Science.gov (United States)

    Barrie, Robert L.; Gabb, Timothy P.; Telesman, Jack; Kantzos, Peter T.; Prescenzi, Anthony; Biles, T.; Bonacuse, P. J.

    2006-01-01

    The fatigue lives of modern powder metallurgy disk alloys can be reduced over an order of magnitude by cracking at inherent non-metallic inclusions. The objective of this work was to study the effectiveness of shot peening in suppressing LCF crack initiation and growth at surface nonmetallic inclusions. Inclusions were carefully introduced at elevated levels during powder metallurgy processing of the nickel-base disk superalloy Udimet 720. Multiple strain-controlled fatigue tests were then performed on machined specimens with and without shot peened test sections at 427 C and 650 C. The low cycle fatigue lives and failure initiation sites varied as functions of inclusion content, shot peening, and fatigue conditions. A large majority of the failures in as-machined specimens with the introduced inclusions occurred at cracks initiating from inclusions intersecting the specimen surface. These inclusions reduced fatigue life by up to 100X, when compared to lives of material without inclusions residing at specimen surface. Large inclusions produced the greatest reductions in life for tests at low strain ranges and high strain ratios. Shot peening improved life in many cases by reducing the most severe effects of inclusions.

  6. Effectiveness of Shot Peening in Suppressing Fatigue Cracking at Non-Metallic Inclusions in Udimet(trademark) 720

    Science.gov (United States)

    Barrie, Robert L.; Gabb, Timothy P.; Telesman, Jack; Kantzos, Peter T.; Prescenzi, Anthony; Biles, Tiffany; Bonacuse, Peter J.

    2005-01-01

    The fatigue lives of modern powder metallurgy disk alloys can be reduced by over an order of magnitude by surface cracking at inherent non-metallic inclusions. The objective of this work was to study the effectiveness of shot peening in suppressing LCF crack initiation and growth at surface nonmetallic inclusions. Inclusions were carefully introduced at elevated levels during powder metallurgy processing of the nickel-base disk superalloy Udimet 720. Multiple strain-controlled fatigue tests were then performed on machined specimens at 427 and 650 C in peened and unpeened conditions. Analyses were performed to compare the low cycle fatigue lives and failure initiation sites as a function of inclusion content, shot peening, and fatigue conditions. A large majority of the failures in as-machined specimens with introduced inclusions occurred at cracks initiating from inclusions intersecting the specimen surface. The inclusions could reduce fatigue life by up to 100X. Large inclusions had the greatest effect on life in tests at low strain ranges and high strain ratios. Shot peening can be used to improve life in these conditions by reducing the most severe effects of inclusions.

  7. Recent trends in Cuba's mining and petroleum industries

    Science.gov (United States)

    Wacaster, Susan; Baker, Michael S.; Soto-Viruet, Yadira; Textoris, Steven D.

    2015-01-01

    In response to recent diplomatic developments between Cuba and the United States, the National Minerals Information Center compiled available information on the mineral industries of Cuba. This fact sheet highlights a new map and table that identify mines, mineral processing facilities, and petroleum facilities as well as information on location, operational status, and ownership. It also addresses the current status of known mineral industry projects, historical developments, and trends of the Cuban economy with an emphasis on mineral industries, and the supply and demand for Cuba’s mineral resources.

  8. Minerals Yearbook, volume III, Area Reports—International—Latin America and Canada

    Science.gov (United States)

    ,

    2017-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  9. Minerals Yearbook, volume III, Area Reports—International—Europe and Central Eurasia

    Science.gov (United States)

    Geological Survey, U.S.

    2017-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  10. Minerals Yearbook, volume III, Area Reports—International—Africa and the Middle East

    Science.gov (United States)

    ,

    2017-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  11. The Global Flows of Metals and Minerals

    Science.gov (United States)

    Rogich, Donald G.; Matos, Grecia R.

    2008-01-01

    This paper provides a preliminary review of the trends in worldwide metals and industrial minerals production and consumption based on newly developed global metals and minerals Material Flow Accounts (MFA). The MFA developed encompass data on extraction and consumption for 25 metal and mineral commodities, on a country-by-country and year-by-year basis, for the period 1970 to 2004. The data-base, jointly developed by the authors, resides with the U.S. Geological Survey (USGS) as individual commodity Excel workbooks and within a Filemaker data management system for use in analysis. Numerous national MFA have been developed to provide information on the industrial metabolism of individual countries. These MFA include material flows associated with the four commodity categories of goods that are inputs to a country's economy, agriculture, forestry, metals and minerals, and nonrenewable organic material. In some cases, the material flows associated with the creation and maintenance of the built infrastructure (such as houses, buildings, roads, airports, dams, and so forth) were also examined. The creation of global metals and industrial minerals flows is viewed as a first step in the creation of comprehensive global MFA documenting the historical and current flows of all of the four categories of physical goods that support world economies. Metals and minerals represent a major category of nonrenewable resources that humans extract from and return to the natural ecosystem. As human populations and economies have increased, metals and industrial minerals use has increased concomitantly. This dramatic growth in metals and minerals use has serious implications for both the availability of future resources and the health of the environment, which is affected by the outputs associated with their use. This paper provides an overview of a number of the trends observed by examining the database and suggests areas for future study.

  12. Determinants of pathologic mineralization.

    Science.gov (United States)

    Kirsch, Thorsten

    2008-01-01

    Physiologic mineralization is necessary for the formation of skeletal tissues and for their appropriate functions during adulthood. Mineralization has to be controlled and restricted to specific regions. If the mineralization process occurs in regions that normally do not mineralize, there can be severe consequences (pathologic or ectopic mineralization). Recent findings have indicated that physiologic and pathologic mineralization events are initiated by matrix vesicles, membrane-enclosed particles released from the plasma membranes of mineralization-competent cells. The understanding of how these vesicles are released from the plasma membrane and initiate the mineralization process may provide novel therapeutic strategies to prevent pathologic mineralization. In addition, other regulators (activators and inhibitors) of physiologic mineralization have been identified and characterized, and there is evidence that the same factors also contribute to the regulation of pathologic mineralization. Finally, programmed cell death (apoptosis) may be a contributor to physiologic mineralization and if occurring after tissue injury may induce pathologic mineralization and mineralization-related differentiation events in the injured and surrounding areas. This review describes how the understanding of mechanisms and factors regulating physiologic mineralization can be used to develop new therapeutic strategies to prevent pathologic or ectopic mineralization events.

  13. Mineral Facilities of Latin America and Canada

    Science.gov (United States)

    Bernstein, Rachel; Eros, Mike; Quintana-Velazquez, Meliany

    2006-01-01

    This data set consists of records for over 900 mineral facilities in Latin America and Canada. The mineral facilities include mines, plants, smelters, or refineries of aluminum, cement, coal, copper, diamond, gold, iron and steel, nickel, platinum-group metals, salt, and silver, among others. Records include attributes such as commodity, country, location, company name, facility type and capacity if applicable, and generalized coordinates. The data were compiled from multiple sources, including the 2003 and 2004 USGS Minerals Yearbooks (Latin America and Candada volume), data to be published in the 2005 Minerals Yearbook Latin America and Canada Volume, minerals statistics and information from the USGS minerals information Web site (minerals.usgs.gov/minerals), and data collected by USGS minerals information country specialists. Data reflect the most recent published table of industry structure for each country. Other sources include statistical publications of individual countries, annual reports and press releases of operating companies,and trade journals. Due to the sensitivity of some energy commodity data, the quality of these data should be evaluated on a country-by-country basis. Additional information and explanation is available from the country specialists.

  14. The effect of non-metallic inclusions on the fracture toughness master curve in high copper reactor pressure vessel welds

    Science.gov (United States)

    Oh, Yong-Jun; Lee, Bong-Sang; Hong, Jun-Hwa

    2002-03-01

    The fracture toughness of two high copper reactor pressure vessel welds having low upper shelf energy was evaluated in accordance with the master curve method of ASTM E1921. The resultant data were correlated to the metallurgical factors involved in the brittle fracture initiation to provide a metallurgical-based understanding of the master curve. The tests were performed using pre-cracked Charpy V-notched specimens and the master curve was made with an average of T0 values determined at different temperatures. In all specimens, the cleavage fracture initiated at non-metallic inclusion ranging from 0.7 to 3.5 μm in diameter showing a scatter with the specimens and testing temperatures. Temperature dependency of the triggering particle size was not found. The fracture toughness ( KJC) was inversely proportional to the square root of the triggering inclusion diameter ( di) at respective temperatures. From this relationship, we determined median KJC values which correspond to the average value of triggering inclusion diameter of all tested specimens and defined them as a modified median KJC ( K'JC(med) ). The obtained K'JC(med) values showed quite smaller deviation from the master curve at different temperatures than the experimental median KJC values. This suggests that the master curve is on the premise of a constant dimension of key microstructural factor in a material regardless of the testing temperature. But the inclusion size at trigger point played an important role in the absolute position of the master curve with temperature and the consequent T0 value.

  15. The effect of non-metallic inclusions on the fracture toughness master curve in high copper reactor pressure vessel welds

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Yong-Jun E-mail: yjoh@kaeri.re.kr; Lee, Bong-Sang; Hong, Jun-Hwa

    2002-03-01

    The fracture toughness of two high copper reactor pressure vessel welds having low upper shelf energy was evaluated in accordance with the master curve method of ASTM E1921. The resultant data were correlated to the metallurgical factors involved in the brittle fracture initiation to provide a metallurgical-based understanding of the master curve. The tests were performed using pre-cracked Charpy V-notched specimens and the master curve was made with an average of T{sub 0} values determined at different temperatures. In all specimens, the cleavage fracture initiated at non-metallic inclusion ranging from 0.7 to 3.5 {mu}m in diameter showing a scatter with the specimens and testing temperatures. Temperature dependency of the triggering particle size was not found. The fracture toughness (K{sub J{sub C}}) was inversely proportional to the square root of the triggering inclusion diameter (d{sub i}) at respective temperatures. From this relationship, we determined median K{sub J{sub C}} values which correspond to the average value of triggering inclusion diameter of all tested specimens and defined them as a modified median K{sub J{sub C}} (K{sup '}{sub J{sub C}}{sub (med)}). The obtained K{sup '}{sub J{sub C}}{sub (med)} values showed quite smaller deviation from the master curve at different temperatures than the experimental median K{sub J{sub C}} values. This suggests that the master curve is on the premise of a constant dimension of key microstructural factor in a material regardless of the testing temperature. But the inclusion size at trigger point played an important role in the absolute position of the master curve with temperature and the consequent T{sub 0} value.

  16. Tunable electronic structures of germanium monochalcogenide nanosheets via light non-metallic atom functionalization: a first-principles study.

    Science.gov (United States)

    Ding, Yi; Wang, Yanli

    2016-08-17

    Germanium monochalcogenides, i.e. GeS and GeSe sheets, are isoelectronic analogues of phosphorene, which have been synthesized in recent experiments (P. Ramasamy et al., J. Mater. Chem. C, 2016, 4, 479). Utilizing first-principles calculations, we have investigated their tunable electronic and magnetic properties via light non-metallic atom (B, C, N, O, Si, P, S) functionalization. We find that on these GeS and GeSe sheets O and S adatoms prefer to locate at the top site above the Ge atom, while the other ones like to occupy the anion site, which push the original S/Se atom to the hollow site instead. O and S adatoms slightly affect the semiconducting behaviour of the doped systems, while B, C, N, Si, P ones will drastically modify their band structures and induce versatile spintronic properties. Through the supercell calculations, B and C adatoms are found to induce a bipolar semiconducting behaviour in the decorated systems, while the N/P adatom will cause a spin-gapless-semiconducting/nearly-half-metallic feature in them. The B/C/N/Si/P-substituted GeS/GeSe sheet can be formed by removing the hollow-site S/Se atom from the adatom-decorated structures, which exhibit an opposite semiconducting/metallic behaviour to their phosphorene counterparts. A general odd-even rule is proposed for this phenomenon, which shows that an odd (even) number of valence electron difference between the substitution and host atoms would cause a metallic (semiconducting) feature in the substituted systems. Our study demonstrates that atom functionalization is an efficient way to tailor the properties of GeS and GeSe nanosheets, which have adaptable electronic properties for potential applications in nanoelectronics and spintronics.

  17. Raising environmental awareness among miners in Iran

    Directory of Open Access Journals (Sweden)

    Ezatollah Mozaffari

    2013-06-01

    Full Text Available Generation of waste is inevitable but controllable in minerals industry. The aim of this research is to find ways forraising environmental awareness among miners. Miners’ attitude towards environmental mining has been investigated. A survey has been done collecting mine managers’ point of view coupled with current trend on mine waste management in Iran. Their opinions on methods used for minerals extraction and waste productionare sought in order to investigate possible educational schemes for waste reduction and mine waste disposal. The type and quantity of waste produced by respondents have been identified to prioritise the wastes produced in minesites. Environmental legislations and policies for good practice minerals extraction are surveyed anddemonstrated. These are regarded as our clients’ preferences on managing mining waste. When combined with other existing policies and methods, they could become part of a learning program to boost awareness among miners.

  18. Characterization of minerals, metals and materials

    CERN Document Server

    Hwang, Jiann-Yang; Bai, Chengguang; Carpenter, John; Cai, Mingdong; Firrao, Donato; Kim, Byoung-Gon

    2012-01-01

    This state-of-the-art reference contains chapters on all aspects of the characterization of minerals, metals, and materials. The title presents papers from one of the largest yearly gatherings of materials scientists in the world and thoroughly discusses the characterization of minerals, metals, and materials The scope includes current industrial applications and research and developments in the following areas:  Characterization of Ferrous Metals Characterization of Non-Ferrous Materials Characterization of Minerals and Ceramics Character

  19. COMPUTATIONAL FLUID DYNAMICS APPLIED TO THE STUDY OF INCLUSIONS FLOTATION IN STEELS FOR AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Ângelo Máximo Fernandes Marins

    2013-03-01

    Full Text Available The practice of inert gas bubbling in steel refining ladle aims the removal of non-metallic inclusions, in addition to thermal and compositional homogenization. Through physical and mathematical models of a secondary ladle refining, the effects of bubbling flow of inert gas and the number of porous plugs located at the bottom of the ladle are investigated. The velocity fields and flotation of non-metallic inclusions are analyzed by physical and mathematical modeling. The results are validated by analysis of images (PIV and the macroscopic model is compared by industrial results for inclusions analysis for steels used in the automotive sector

  20. The Influence of Technological Parameters of X70 Stainless Steel Ladle Refining on the Residual Content of Non-Metallic Inclusions

    Directory of Open Access Journals (Sweden)

    Babanin A.

    2015-09-01

    Full Text Available It is demonstrated that during secondary refining at the ladle furnace the carbon content of steel and the residence time of the metal in the ladle exert a significant impact on the residual content of non-metallic inclusions (NMI in steel. Mathematical calculations showed that the dynamic forces have minor effect on the motion of small sized NMI, making it difficult to penetrate deep into the slag.

  1. The Influence of Industrial Structure Evolution on Atmospheric Environment -Based on the Panel Data of Industries in Chongqing%重庆市产业结构演变对大气环境的影响分析

    Institute of Scientific and Technical Information of China (English)

    傅强; 陈雪娇

    2011-01-01

    产业结构转型在促进经济增长的同时,也对大气环境产生了影响.本文根据结构效应、规模效应及技术效应建立模型,利用重庆市1999-2008年22个工业行业的相关面板数据进行了实证分析.结果表明,工业结构效应对于工业二氧化硫、工业烟尘、工业粉尘所起到的影响有限,大气污染物排放量的降低主要归功于政府环境政策强度,技术进步所带来的大气环境的改善逐渐显现.重庆市应重点加强非金属矿物制品业、化学原料及化学制品制造业、黑色金属冶炼及压延加工业与电力、燃气及水的生产和供应业等高污染排放行业的治理及技术创新.%While industrial structure transformation promotes economic growth, it might also have a negative impact on the atmospheric environment. This paper uses the panel data of 22 industries from 1999 to 2008 in Chongqing. This paper does an empirical analysis through establishing a model based on structural effect, scale effect and technical effect. The conclusion shows that the impact of industrial structure effect on industrial sulfur dioxide, industrial smoke and industrial dust is limited and environment-protection policies of the government and technological progress play a major role in reduction of atmospheric pollutants emission. The paper proposes that Chongqing should focus on management and technological innovation of high pollution industries such as the non-metallic mineral products industry, chemical materials and chemical products manufacturing industry, ferrous metal smelting and rolling processing industry and in production and supply of electricity, gas and water.

  2. Study of the physicochemical effects on the separation of the non-metallic fraction from printed circuit boards by inverse flotation.

    Science.gov (United States)

    Flores-Campos, R; Estrada-Ruiz, R H; Velarde-Sánchez, E J

    2017-09-06

    Recycling printed circuit boards using green technology is increasingly important due to the metals these contain and the environmental care that must be taken when separating the different materials. Inverse flotation is a process that can be considered a Green Technology, which separates metallic from non-metallic fractions. The degree of separation depends on how much material is adhered to air bubbles. The contact angle measurement allows to determine, in an easy way, whether the flotation process will occur or not and thus establish a material as hydrophobic or not. With the material directly obtained from the milling process, it was found that the contact angle of the non-metallic fraction-liquid-air system increases as temperature increases. In the same way, the increments in concentration of frother in the liquid increase the contact angle of the non-metallic fraction-liquid-air system. 10ppm of Methyl Isobutyl Carbinol provides the highest contact angle as well as the highest material charging in the bubble. Copyright © 2017. Published by Elsevier Ltd.

  3. Industrial investigations of the liquid steel filtration

    Directory of Open Access Journals (Sweden)

    K. Janiszewski

    2014-07-01

    Full Text Available Hitherto existing investigations concerning the ceramic filter use in the steel making processes have given good results. The obtained results of filtration have proved that this method may be used as an effective and cheap way of steel filtration from non-metallic inclusions. Placing filters in the tundish is the best location considering the limitation of the possibility of secondary pollution of steel. Yet, the results presented in this paper, of an experiment prepared and carried out in the industrial environment, are the only positive results obtained, which are connected with so much quantities of liquid steel processed with use of the multi-hole ceramic filters.

  4. [Mineral water as a cure].

    Science.gov (United States)

    Nocco, Priska Binz

    2008-01-01

    resorts mentioned, especially regarding the quality and quantity aspects of the performed mineral water analyses, as well as in the reported written evidence and publications on the success of the therapies. Differences were also to be found in the conditions of the health resort facilities and in the medical support given. The therapy opportunities included mainly drinking and bath cures, which could occur alone or in combination. In the mentioned health resorts different clinical disease symptoms were treated. The most important baths were located in Acquarossa and Stabio, which were specialized in selected therapeutical domains, because of their particular water compositions. Numerous personalities from science and politics were concerned by the local springs and accepted to contribute to the promotion of these structures. Their engagement led to the integration of the native springs in the Farmacopea Ticinese. Since at that time it was extremely difficult to find experienced mineral water analysts in the region, the analyses of local native sources were assigned to qualified experts mainly coming from Italy. This scientific co-operation between the southern part of Switzerland and the northern part of Italy was, already at that time, active also in other work domains. The evaluation of the historical documentation available from the Farmacia Vantussi shows that this pharmacy supplied a considerable assortment of national and foreign spring waters, as well as foreign dried components. Of commercial interest was, to be noted, the free sale of the waters to hospitals, institutions, hotels, restaurants as well as to private households. The sales of waters and of their dried components upon prescription, however, constituted only the minor part. The introduction of the industrial bottling occurring in the first decades of the 20th century, led to a lowering price trend, through which the product 'mineral water' became accessible to a broader public. Henceforth its

  5. Utilization of mining and mineral wastes

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyung Ho; Hong, Seung Woong; Choi, Young Yoon; Kim, Byung Gyu; Park, Je Shin [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Up to now, it is estimated that more than 50 million tons of mineral wastes have been generated mining industries and deposited on the land in Korea. Much of cultivated land and hilly areas have been occupied by this wastes, which cause pollution of the environment. Utilization of the mineral wastes is preferable to stabilization because full use would both eliminate the waste and broaden the mineral resource base. Therefore, the development of utilization techniques of mineral wastes is very important not only for improving the environment but also for resource conservation. In countries with high population and poor natural resources like Korea, the utilization of these wastes is essential to decrease the environmental problem and the secure the resources and the study on this field play a important part. Therefore, the objective of this study is to develop the utilization techniques of the mineral wastes. In first year's research, the contents and scope of this study are 1) Present condition and Field Survey on the mineral wastes with respect of their utilization, 2) Reviews of Current effects and research to utilize mineral wastes, 3) Characterization of mineral wastes and environmental test, 4) Evaluation and study on the utilization. (author). 67 refs., 25 tabs., 54 figs.

  6. Utilization of mining and mineral wastes

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyung Ho; Hong, Seung Woong; Choi, Young Yoon; Kim, Byung Gyu; Park, Je Shin [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Up to now, it is estimated that more than 50 million tons of mineral wastes have been generated mining industries and deposited on the land in Korea. Much of cultivated land and hilly areas have been occupied by this wastes, which cause pollution of the environment. Utilization of the mineral wastes is preferable to stabilization because full use would both eliminate the waste and broaden the mineral resource base. Therefore, the development of utilization techniques of mineral wastes is very important not only for improving the environment but also for resource conservation. In countries with high population and poor natural resources like Korea, the utilization of these wastes is essential to decrease the environmental problem and the secure the resources and the study on this field play a important part. Therefore, the objective of this study is to develop the utilization techniques of the mineral wastes. In first year's research, the contents and scope of this study are 1) Present condition and Field Survey on the mineral wastes with respect of their utilization, 2) Reviews of Current effects and research to utilize mineral wastes, 3) Characterization of mineral wastes and environmental test, 4) Evaluation and study on the utilization. (author). 67 refs., 25 tabs., 54 figs.

  7. Efeitos respiratórios da exposição ao talco industrial em ex-trabalhadores de mineração Efectos respiratorios de la exposición al talco industrial en extrabajadores de minería Respiratory effects from industrial talc exposure among former mining workers

    Directory of Open Access Journals (Sweden)

    Rosinelle Castelo Branco Ramos Loyola

    2010-06-01

    Full Text Available OBJETIVO: Avaliar efeitos respiratórios tardios da inalação ocupacional de talco contaminado por asbesto. MÉTODOS: Análise de série de casos de 29 ex-trabalhadores de mineração de talco contaminado com asbestos provenientes de Carandaí, MG, atendidos no Centro de Referência Estadual de Saúde do Trabalhador de Minas Gerais em 2004-2005. Os ex-trabalhadores foram submetidos a anamnese clínico-ocupacional, radiografia de tórax e espirometria. Foi criado um escore de exposição que, multiplicado pela duração, originou um índice de exposição cumulativa ao talco. Para verificar a associação do índice de exposição cumulativa com a presença de alterações radiológicas, sugestivas de pneumoconiose e/ou alterações pleurais, foi ajustado um modelo de regressão logística exata. RESULTADOS: Todos os ex-trabalhadores eram homens, com média de idade de 48,2 anos. Nas radiografias de tórax foram encontradas alterações pleurais em três deles, opacidades parenquimatosas compatíveis com pneumoconiose em um e suspeita em seis. Alterações espirométricas ocorreram em três. A regressão logística apontou odds ratio de 1,059 (IC 95%: 1,012;1,125 para o índice acumulado, ou seja, cada unidade no índice resulta em um aumento de 5,9% na chance de apresentar alteração radiológica compatível ou suspeita de pneumoconiose. Em relação à mediana do tempo estimado de latência entre o início da exposição até o diagnóstico das placas pleurais, ocorreu diferença significativa (p = 0,013 entre os casos (27,0 anos e não casos (14,3 anos. CONCLUSÕES: Os achados apontam a necessidade de controle clínico nos trabalhadores que foram expostos a asbesto, particularmente devido aos efeitos tardios da exposição a esse mineral.OBJETIVO: Evaluar efectos respiratorios tardíos de la inhalación ocupacional de talco contaminado por asbesto. MÉTODOS: Análisis de serie de casos de 29 extrabajadores de minería de talco contaminado

  8. Mineral resources of Australia

    Energy Technology Data Exchange (ETDEWEB)

    Kelsall, D.F.; Woodcock, J.T. (eds.)

    1979-01-01

    The papers presented cover geological, geochemical technology and geophysics in mineral exploration, mineral resources, mining methods and technology, aspects of beneficiation, pyrometallurgy and hydrometallurgy, and environmental aspects. 4 of the 14 papers have been abstracted separately.

  9. Construction Minerals Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes construction minerals operations in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  10. Agricultural Minerals Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes agricultural minerals operations in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  11. Mineral Resources Data System

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Mineral resource occurrence data covering the world, most thoroughly within the U.S. This database contains the records previously provided in the Mineral Resource...

  12. Development of Industrial Clusters in Henan Province Based on Location Quotient Analysis%基于区位商法对河南省产业集群发展分析

    Institute of Scientific and Technical Information of China (English)

    鲁玉秀

    2014-01-01

    通过运用区位商分析法对河南省产业集群发展进行分析,得出结论河南省的煤炭开采、有色金属矿采和冶炼、非金属矿物制品业、农副食品加工和食品制造业、纺织业、设备制造业等行业具有较强的发展优势,这些行业应该确定为河南省产业集群度较高的行业;河南省产业关联度较高的行业主要为资源型和劳动密集型行业,缺乏高科技型产业群。在一定时期内,河南省应需要继续巩固和发展传统优势行业,并积极培育新的临空产业,大力加强传统产业集群升级,注重产业集群的创新,充分利用河南区位优势,加大技术承接,培育技术创新,从而提升河南省工业整体实力。%Analyzing the development of industrial clusters in Henan province with location quotient, the study concludes that some in-dustries have strong development strength, including coal mining, non-ferrous metal ore mining and smelting, non-metallic mineral prod-uct industry, agricultural and food processing and manufacturing industry, textile industry, and equipment manufacturing industry. These industries should be defined as industries of high cluster degree in Henan. In the province, industries of high industrial correlation are re-source-based and labor-intensive, but not high-tech industry cluster. In a certain period of time, Henan should continue to consolidate and develop the traditional advantaged industries, vigorously strengthen the upgrading of traditional industrial cluster, pay attention to in-novation of industrial clusters, make full use of the location advantage of Henan, intensify technology transfer and innovation in ways that enhance the overall strength of the industry in the province.

  13. Energy Uutilization-efficiency Empirical Analysis of Jiangxi Main Energy-consumption Industry Based on Data Envelopment Analysis%基于DEA的江西主要耗能行业能源利用效率实证分析

    Institute of Scientific and Technical Information of China (English)

    涂国平; 段宗蓬

    2011-01-01

    The energy utilization-efficiency of Jiangxi main energy-consumption industry largely determined that of Jiangxi industry ,based on the energy consumption, labor,fixed asset investment as the input index ,the Industrial value-added as output index, using the Data Envelopment Analysis (DEA) to research the energy utilization-efficiency of Jiangxi main energy-consumption Industry.The research showed that:2003-2008 the energy utilizationefficiency of Jiangxi main energy-consumption industry increased overall, among that the energy utilization-efficiency of the non-ferrous metal smelting and rolling processing and oil processing coking and nuclear industry was relatively high, that of non-metallic minerals manufacturing was relatively low.In the actual production process, The DEA invalid industry should pay attention to rational allocation of resources and investment scale.%采用数据包络分析法(DEA),以能源消耗量、劳动力、固定资产投资作为输入指标,以工业增加值作为输出指标,对江西主要耗能行业能源利用效率进行了实证分析,结果表明:2003-2008年江西省主要耗能行业的总体能源利用效率逐年增高,其中有色金属冶炼、压延加工业、石油加工、炼焦及核燃料加工业的能源利用效率相对较高,非金属矿物制品业的能源利用效率相对较低.未达DEA有效行业在实际生产过程中,应注重资源的合理配置及投入规模.

  14. Typomorpic Characteristics of the Major Minerals in the Puziwan Gold Deposit, Datong, Shanxi, China

    Institute of Scientific and Technical Information of China (English)

    QING Min; NIU Cuiyi; LEI Shibin

    2008-01-01

    Utilizing theories of minerageny and prospecting mineralogy, the authors studied theattitude, morphotype and chemical composition of metallic minerals of pyrite, gold, chalcopyrite,galena and sphalerite, non-metallic minerals of quartz, carbonate, dolomite and rutile in the Puziwangold deposit. The study shows the following results. (1) The mineral assemblage is complex and thespecies of sulfide are abundant with occurrences of sulfosalt minerals. (2) The composition in theminerals is complex and there rich micro elements, including As, Sb, Bi, Se, Te, Au, Ag, Cu, Pb, Zn, andCr, Ni, V. The typomorphic characteristics of the association of the elements and their specific valuesuggest that gold mineralization is associated with shallow magmatic hydrothermai activity, the ore-forming fluid is the mixture of abundant rising alkali magmatic water originating from the mantle orthe lower crust and the descending acid atmospheric water. (3) Ankerite, Fe-rich sphalerite, granularTi-rich rutile are widely distributed, which indicate great denudation depths, high mineralizationtemperature. The deposit is found in the middle and shallow positions of the porphyry series. The deeplayers are not favorable for gold mineralization. (4) Copper minerals are rich in the ores and sulfideshave high content of copper, suggesting possible porphyry-type Cu (Au) mineralization in deeppositions and the surrounding areas.

  15. Mineral Supply Challenges

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Faced with shortcomings in its mineral supply, it’s imperative for China to balance its desire for reserves with its current economic needs Mineral resources are the corner- stone of materials needed for China’s national economic and social development.The country even counts on its mineral resources to satisfy 90 percent of its energy demands and over 95

  16. U.S. Geological Survey mineral databases; MRDS and MAS/MILS

    Science.gov (United States)

    McFaul, E.J.; Mason, G.T.; Ferguson, W.B.; Lipin, B.R.

    2000-01-01

    These two CD-ROM's contain the latest version of the Mineral Resources Data System (MRDS) database and the Minerals Availability System/Minerals Industry Location System (MAS/MILS) database for coverage of North America and the world outside North America. The records in the MRDS database each contain almost 200 data fields describing metallic and nonmetallic mineral resources, deposits, and commodities. The records in the MAS/MILS database each contain almost 100 data fields describing mines and mineral processing plans.

  17. Industrial diamond

    Science.gov (United States)

    Olson, D.W.

    2001-01-01

    An overview of the industrial diamond industry is provided. More than 90 percent of the industrial diamond consumed in the U.S. and the rest of the world is manufactured diamond. Ireland, Japan, Russia, and the U.S. produce 75 percent of the global industrial diamond output. In 2000, the U.S. was the largest market for industrial diamond. Industrial diamond applications, prices for industrial diamonds, imports and exports of industrial diamonds, the National Defense Stockpile of industrial diamonds, and the outlook for the industrial diamond market are discussed.

  18. Mineral CO2 sequestration by steel slag carbonation

    NARCIS (Netherlands)

    Huijgen, W.J.J.; Comans, R.N.J.

    2005-01-01

    Mineral CO2 sequestration, i.e., carbonation of alkaline silicate Ca/Mg minerals, analogous to natural weathering processes, is a possible technology for the reduction of carbon dioxide emissions to the atmosphere. In this paper, alkaline Ca-rich industrial residues are presented as a possible feeds

  19. Mineral facilities of Northern and Central Eurasia

    Science.gov (United States)

    Baker, Michael S.; Elias, Nurudeen; Guzman, Eric; Soto-Viruet, Yadira

    2010-01-01

    This map displays almost 900 records of mineral facilities within the countries that formerly constituted the Union of Soviet Socialist Republics (USSR). Each record represents one commodity and one facility type at a single geographic location. Facility types include mines, oil and gas fields, and plants, such as refineries, smelters, and mills. Common commodities of interest include aluminum, cement, coal, copper, gold, iron and steel, lead, nickel, petroleum, salt, silver, and zinc. Records include attributes, such as commodity, country, location, company name, facility type and capacity (if applicable), and latitude and longitude geographical coordinates (in both degrees-minutes-seconds and decimal degrees). The data shown on this map and in table 1 were compiled from multiple sources, including (1) the most recently available data from the U.S. Geological Survey (USGS) Minerals Yearbook (Europe and Central Eurasia volume), (2) mineral statistics and information from the USGS Minerals Information Web site (http://minerals.usgs.gov/minerals/pubs/country/europe.html), and (3) data collected by the USGS minerals information country specialists from sources, such as statistical publications of individual countries, annual reports and press releases of operating companies, and trade journals. Data reflect the most recent published table of industry structure for each country at the time of this publication. Additional information is available from the country specialists listed in table 2

  20. Chelated minerals for poultry

    Directory of Open Access Journals (Sweden)

    SL Vieira

    2008-06-01

    Full Text Available Organic minerals have been subject of an increasing number of investigations recently. These compounds can be considered the most significant event regarding commercial forms of minerals targeting animal supplementation in the last decades. Minerals, especially metals, are usually supplemented in poultry feeds using cheap saline sources and have never required a lot of attention in terms of quality. On the other hand, definitions of organic minerals are very broad and frequently lead to confusion when decision-making becomes necessary. Organic minerals include any mineral bound to organic compounds, regardless of the type of existing bond between mineral and organic molecules. Proteins and carbohydrates are the most frequent candidates in organic mineral combinations. Organic fraction size and bond type are not limitations in organic mineral definition; however, essential metals (Cu, Fe, Zn, and Mn can form coordinated bonds, which are stable in intestinal lumen. Metals bound to organic ligands by coordinated bonds can dissociate within animal metabolism whereas real covalent bonds cannot. Chelated minerals are molecules that have a metal bound to an organic ligand through coordinated bonds; but many organic minerals are not chelates or are not even bound through coordinated bonds. Utilization of organic minerals is largely dependent on the ligand; therefore, amino acids and other small molecules with facilitated access to the enterocyte are supposed to be better utilized by animals. Organic minerals with ligands presenting long chains may require digestion prior to absorption. After absorption, organic minerals may present physiological effects, which improve specific metabolic responses, such as the immune response. Many studies have demonstrated the benefits of metal-amino acid chelates on animal metabolism, but the detection positive effects on live performance is less consistent.

  1. Mechanical Properties of Man-Made Mineral glass fibres

    DEFF Research Database (Denmark)

    Lund, Majbritt Deichgræber; Yue, Yuanzheng

    ; man-made mineral glass fibres. The basaltic melt is prevented from crystallizing due to the high cooling rate, forming the mineral glass wool fibres. Basaltic mineral wool fibres are of high interest in industry due to their good chemical durability and excellent heat and sound insulation properties...... and hence they are used for insulation products. In spite of those advantages, man made mineral wool fibres still show a certain degree of brittleness, which limits the further improvement of man made mineral wool fibres for both transportation and application. Therefore, a reduction in the brittleness...... of man made mineral wool fibres, and an improvement of the mechanical performances of man made mineral wool fibres are an evitable task for us. To do so, it is important to look into the fracture behaviour and its connection to the mechanical strength. In order to improve the understanding...

  2. Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates

    Directory of Open Access Journals (Sweden)

    S. Henschel

    2015-10-01

    Full Text Available An inhomogeneous distribution of non-metallic inclusions can result from the steel casting process. The aim of the present study was to investigate the damaging effect of an inhomogeneous distribution of nonmetallic inclusions on the crack extension behavior. To this end, the fracture toughness behavior in terms of quasi-static J-a curves was determined at room temperature. Additionally, dynamic fracture mechanics tests in an instrumented Charpy impact-testing machine were performed. The fracture surface of fracture mechanics specimens was analyzed by means of scanning electron microscopy. It was shown that an inhomogeneous distribution significantly affected the path and, therefore, the plane of crack growth. Especially clusters of non-metallic inclusions with a size of up to 200 μm exhibited a very low crack growth resistance. Due to the damaging effect of the clusters, the growing crack was strongly deflected towards the cluster. Furthermore, crack tip blunting was completely inhibited when inclusions were located at the fatigue precrack tip. Due to the large size of the non-metallic inclusion clusters, the height difference introduced by crack path deflection was significantly larger than the stretch zone height due to the crack tip blunting. However, the crack path deflection introduced by a cluster was not associated with a toughness increasing mechanism. The e dynamic loading ( 1 0.5 5 s MPam 10   K did not result in a transition from ductile fracture to brittle fracture. However, the crack growth resistance decreased with increased loading rate. This was attributed to the higher portion of relatively flat regions where the dimples were less distinct.

  3. Effect Of Non-metal Elements (C, N, S) As Anionic Dopants On Electronic Structure Of Tio2-Anatase By Density-Functional Theory Approach

    OpenAIRE

    Hari Sutrisno

    2016-01-01

    This article is a theoritical approach to calculate the electronic structure of undoped- and non-metal anions doped-TiO2-anatase. The objective of the research is to calculate abinitio the band structure and the density of states (DOS) of undoped-, C-, N-, and S-doped TiO2-anatase. Kohn-Sham equations are performed with the density functional theory (DFT) using the local density approximation (LDA) for exchange-correlation functional. The first-principle calculations were done using supercell...

  4. Physico-chemical characteristics of activated carbons based on a copolymer of furfural and mineral raw materials of the Republic of Kazakhstan and their application in extracting gold from industrial solutions

    Directory of Open Access Journals (Sweden)

    Kanagat Kishibayev

    2013-09-01

    Full Text Available Activated carbons are widely used in different industries for cleaning a variety of natural objects from of technogenic pollutants. In the article presents the results of physico-chemical investigations of activated carbons. The investigations on the sorption of gold in cyanide solutions activated sorbent based on furfural and sorbent based on shungit.

  5. Recultivation of Podmreka quarry by means of closed cycle of mineral resources extraction - chances for future

    Directory of Open Access Journals (Sweden)

    Gorazd Žibret

    2004-06-01

    Full Text Available The main idea is how we could use the scrapped construction materials for the recultivation of abandoned extraction sites in the means of closed cycle from extraction of the non metallic mineral resourced, consumption and deposition at the end. In the article the Slovenian law concerning this area and the case study of Podsmreka quarry is described. The process takes the opposite direction from extraction, which means that the company does not need a lot of additional equipment. This is a good option for the environment, society and for the companies after finishing the exploitation.

  6. SIMULATION PROCESS OF REMOVING NON-METALLIC INCLUSIONS IN ALUMINUM ALLOYS USING THE PROGRAM FLOW-3D

    Directory of Open Access Journals (Sweden)

    N. V. Sletova

    2013-01-01

    Full Text Available The perspective materials for making fining preparations for the silumins are the calcium and strontium carbonates from the environmental safety point of view are shown. Principle possibility of using dispersed carbonates in the fining mixtures is confirmed by late inoculation process research using simulation FLOW-3D.The high efficiency of the fining mixture with the inoculants effect is confirmed by the industrial tests

  7. Mineral fibre persistence and carcinogenicity.

    Science.gov (United States)

    McDonald, J C

    1998-10-01

    Epidemiological research during the past 40 years has demonstrated with increasing clarity that amphibole asbestos fibres--crocidolite, amosite and tremolite--are more carcinogenic than chrysotile. A smaller number of well-controlled studies using lung burden analyses, while adding to the specificity of this conclusion, have shown that amphibole fibres also differ from chrysotile in being far more durable and biopersistent in lung tissue. Analyses of mesothelioma and lung cancer in a large cohort of Canadian chrysotile miners and millers have recently shown that the low-level presence of fibrous tremolite in these mines, rather than the chrysotile, may well be responsible. The high risk of lung cancer, but not of mesothelioma, in the chrysotile textile industry remains anomalous and cannot be explained in this way. These various findings are directly relevant to the choice of the experimental methods which should be used for screening man-made fibres for industrial use. Although it is clear that biopersistence is a major determinant of cancer risk in animals, and perhaps also in man, other factors affecting the biological activity of mineral fibres may also be important.

  8. [Occupational hazads in metal mining industry].

    Science.gov (United States)

    Saarkoppel', L M; Rushkevich, O P; Kir'iakov, V A; Sineva, E L; Kazantsev, D P

    2005-01-01

    Miners of basic professions employed in contemporary metal mining industry are exposed to a range of industrial factors, such as vibration, noise, dustiness, and unfavorable microclimate. Long-term exposure to these factors is hazardous to their health, which is manifested by elevated general and occupational morbidity and a higher rate of biological aging. This is most typical of Far North miners, who are exposed to the combination of the industrial factors and extremal climate and geographic conditions. Research into the health status of miners engaged to underground works and open excavations in regions with contrasting climate and geographic conditions, allowed determination of main industrial risk factors (vibration and noise), leading occupational diseases and groups of high risk of their development (according to the occupation and the length of service). The study found high risk of cardivascular diseases as well as pathology of the musculoskeletal system, which was highest in miners in Norilsk region.

  9. British Columbia 1998 mineral exploration review; rev. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Schroeter, T.G.

    1999-01-01

    The review discusses mining and exploration highlights, government initiatives, and outlook for 1999. Mining covers the locations of 14 metal, eight coal, ten industrial mineral mines, and one tailings project. Exploration highlights cover metals, massive sulphide deposits, porphyry and related deposits, precious metal bearing veins and bulk-mineable deposits, skarn/manto deposits, magmatic nickel, coal deposits, and industrial minerals. Information is tabulated on the 1998 forecast value of solid mineral production and on new mines, closures, development, advanced exploration projects, and exploration highlights. 9 figs., 3 tabs.

  10. 43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

    Science.gov (United States)

    2010-10-01

    ... patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest... locations, mineral patents, and mineral leasing within National Forest Wilderness are contained in parts...

  11. Gold Rushes and mineral property rights allocation

    DEFF Research Database (Denmark)

    Sinding, Knud

    , is to handle the other projects that are generated by the "gold rush" informational externalities created by the initial discovery. At the core of the problems of dealing with a gold rush situation is both the informational externality and an institutional framework which is not designed to deal with large...... influxes of prospectors competing for a very limited area. This paper charts significant gold rush events in the mineral industry in recent decades and uses preliminary data on the areas impacted by these gold rushes to argue that many mineral tenure systems should be modified in order to be better able...

  12. Industry Employment

    Science.gov (United States)

    Occupational Outlook Quarterly, 2012

    2012-01-01

    This article illustrates projected employment change by industry and industry sector over 2010-20 decade. Workers are grouped into an industry according to the type of good produced or service provided by the establishment for which they work. Industry employment projections are shown in terms of numeric change (growth or decline in the total…

  13. Proceedings of the 36. annual meeting of the Canadian Mineral Processors

    Energy Technology Data Exchange (ETDEWEB)

    Abols, J. [Gekko Systems, Vancouver, BC (Canada)] (comp.)

    2004-07-01

    This conference provided an opportunity for professionals and students in the metallurgical and minerals processing industries to gain insight into how metallurgical projects can be successfully designed, engineered and commissioned. It provides information on mineral deposits, ore controls, mineralogy, geochemistry, mineral processing and beneficiation. The presentations covered a wide range of issues regarding mineral processing such as plant operations and improvements, process control and simulation, industrial minerals, applied mineralogy, effluent treatment and new technology and predictive tools. This conference featured 38 presentations, of which 4 have been indexed separately for inclusion in this database. refs., tabs., figs.

  14. Mineral Fiber Toxicology

    Science.gov (United States)

    The chemical and physical properties of different forms of mineral fibers impact biopersistence and pathology in the lung. Fiber chemistry, length, aspect ratio, surface area and dose are critical factors determining mineral fiber-associated health effects including cancer and as...

  15. Prevalencia de neumoconiosis y su relación con medidas de higiene y seguridad industrial y niveles ambientales de carbón en minería subterránea en el departamento de Cundinamarca - Colombia, 2015

    OpenAIRE

    Peña Corrales, Luis Eduardo; Palma, Ruth Marien; Varona, Marcela

    2016-01-01

    Introducción: La exposición en minas subterráneas a altos niveles de polvo de carbón está relacionada con patologías pulmonares. Objetivo: Determinar la prevalencia de neumoconiosis, medidas de higiene y seguridad industrial y su relación con niveles ambientales de carbón en trabajadores de minas de socavón en Cundinamarca. Materiales y Métodos: Estudio de corte transversal, en 215 trabajadores seleccionados mediante muestreo probabilístico estratificado con asignación proporcional. ...

  16. Mineral commodity profiles: nitrogen

    Science.gov (United States)

    Kramer, Deborah A.

    2004-01-01

    Overview -- Nitrogen (N) is an essential element of life and a part of all animal and plant proteins. As a part of the DNA and RNA molecules, nitrogen is an essential constituent of each individual's genetic blueprint. As an essential element in the chlorophyll molecule, nitrogen is vital to a plant's ability to photosynthesize. Some crop plants, such as alfalfa, peas, peanuts, and soybeans, can convert atmospheric nitrogen into a usable form by a process referred to as 'fixation.' Most of the nitrogen that is available for crop production, however, comes from decomposing animal and plant waste or from commercially produced fertilizers. Commercial fertilizers contain nitrogen in the form of ammonium and/or nitrate or in a form that is quickly converted to the ammonium or nitrate form once the fertilizer is applied to the soil. Ammonia is generally the source of nitrogen in fertilizers. Anhydrous ammonia is commercially produced by reacting nitrogen with hydrogen under high temperatures and pressures. The source of nitrogen is the atmosphere, which is almost 80 percent nitrogen. Hydrogen is derived from a variety of raw materials, which include water, and crude oil, coal, and natural gas hydrocarbons. Nitrogen-based fertilizers are produced from ammonia feedstocks through a variety of chemical processes. Small quantities of nitrates are produced from mineral resources principally in Chile. In 2002, anhydrous ammonia and other nitrogen materials were produced in more than 70 countries. Global ammonia production was 108 million metric tons (Mt) of contained nitrogen. With 28 percent of this total, China was the largest producer of ammonia. Asia contributed 46 percent of total world ammonia production, and countries of the former U.S.S.R. represented 13 percent. North America also produced 13 percent of the total; Western Europe, 9 percent; the Middle East, 7 percent; Central America and South America, 5 percent; Eastern Europe, 3 percent; and Africa and Oceania

  17. Estimation of the ionic charge of non-metallic species into an electrical discharge through a web application

    Science.gov (United States)

    Pérez Gutiérrez, B. R.; Vera-Rivera, F. H.; Niño, E. D. V.

    2016-08-01

    Estimate the ionic charge generated in electrical discharges will allow us to know more accurately the concentration of ions implanted on the surfaces of nonmetallic solids. For this reason, in this research a web application was developed to allow us to calculate the ionic charge generated in an electrical discharge from the experimental parameters established in an ion implantation process performed in the JUPITER (Joint Universal Plasma and Ion Technologies Experimental Reactor) reactor. The estimated value of the ionic charge will be determined from data acquired on an oscilloscope, during startup and shutdown of electrical discharge, which will then be analyzed and processed. The study will provide best developments with regard to the application of ion implantation in various industrial sectors.

  18. Industrial Chain: Industrial Vertical Definition

    Institute of Scientific and Technical Information of China (English)

    YifeiDu; GuojunJiang; ShimingLi

    2004-01-01

    Like value chain and supply chain, “industrial chain” becomes the focus of attention. The implication of “industrial chain” has gained a large range of extension. It not only expresses the industrial “chain” structure and relationship of “back and forward”in order or “up and down” in direction, but also it represents a cluster of large scale of firms in an area or colony. It is a network, or a community. Consequently, we conclude that “industrial chain” is a synthesis of industrial chain, industrial cluster, or industrial network.In this article, firstly we will distinguish industry chain from industry. An industry is the collection of firms that have the same attribute, so an industry can be defined by firm collection of certain attribute. We indicate that industrial chain is a kind of vertical and orderly industrial link. It is defined according to a series of specific product or service created. Secondly we analyze the vertical orderly defiinition process from the aspects of social division of labor and requirement division, self-organization system, and value analysis.Non-symmetry and depending on system or community of large scale of industrial units lead to entire industry to “orderly” structure. On the other hand, the draught of diversity and complexity of requirement simultaneously lead to entire industry to be more “orderly”. Along with processes of self-organization, industrial will appi'oach the state of more orderly and steady, and constantly make industrial chain upgrade. Each firm or unit, who will gain the value, has to establish channels of value, which we called “industrial value chain”. Lastly,we discuss the consequence of vertical and orderly definition, which is exhibited by a certain relationship body. The typical forms of industrial chain include industrial cluster, strategy alliance and vertical integration etc.

  19. Nonfuel mineral resources in the United States-Mexico border region; a progress report on information available from the Center for Inter-American Mineral Resource Investigations (CIMRI)

    Science.gov (United States)

    Orris, G.J.; Page, N.J.; Staude, J.G.; Bolm, K.S.; Carbonaro, M.M.; Gray, Floyd; Long, K.R.

    1993-01-01

    The exploitation of minerals has played a significant role in population growth and development of the U.S.Mexico border region. Recent proposed changes in regulations related to mining in the United States and changes in mining and investment regulations in Mexico have led to increased mineral exploration and development in Mexico, especially in the border region. As a preliminary step in the study of the mineral industry of this area, the Center for Inter-American Mineral Resource Investigations (CIMRI) of the U.S. Geological Survey has compiled mine and occurrence data for nonfuel minerals in the border region. Analysis of this information indicates that a wide variety of metallic and industrial mineral commodities are present which can be used in agriculture, infrastructure, environmental improvement, and other industries. Therefore, mining will continue to play a significant role in the economy of this region.

  20. Studi Komposisi Mineral Tepung Batu Bukit Kamang Sebagai Bahan Baku Pakan Sumber Mineral

    Directory of Open Access Journals (Sweden)

    Khalil

    2007-04-01

    Full Text Available The study was conducted to determine mineral content of limestone originated from natural deposit of Bukit Kamang for feedstuff. Six samples were prepared and chemically analyzed. The first was limestone in meal form as a product of local milling industry. Another five samples were deposit components with different color of blackish, dark blue, blue, light blue and white. There was 21 kinds of mineral determined which were divided into 3 groups: macros (Ca, P, Mg, Na, K, Cl and S, trace minerals (Mn, Zn, Fe, Cu, Se, Co and Mo and toxic elements (As, F, Hg, Cd, Pb, Ni and Cr. The results showed that Bukit Kamang’s limestone contained considerable high essential minerals of Ca, Se, Fe and Mn. The limestone consisted of 38%-40% Ca, 388 ppm Se, 295 ppm Fe and 205 ppm Mn. There were two toxic elements detected: Pb and Cd, but their concentration was found relatively low: 28 and 7 ppm, respectively.

  1. Why Mineral Interfaces Matter

    Science.gov (United States)

    Putnis, Andrew; Putnis, Christine V.

    2015-04-01

    While it is obvious that reactions between a mineral and an aqueous solution take place at the mineral-fluid interface it is only relatively recently that high spatial resolution studies have demonstrated how the local structure of the mineral surface and the chemical composition of the fluid at the interface control both the short-range and the long-range consequences of mineral-fluid interaction. Long-range consequences of fluid-mineral interaction control element cycles in the earth, the formation of ore-deposits, the chemical composition of the oceans through weathering of rocks and hence climate changes. Although weathering is clearly related to mineral dissolution, to what extent do experimentally measured dissolution rates of minerals help to understand weathering, especially weathering mechanisms? This question is related to the short-range, local reactions that take place when a mineral, that is not stable in the fluid, begins to dissolve. In this case the fluid composition at the interface will become supersaturated with respect to a different phase or phases. This may be a different composition of the same mineral e.g. a Ca-rich feldspar dissolving in a Na-rich solution results in a fluid at the interface which may be supersaturated with respect to an Na-rich feldspar. Alternatively, the interfacial fluid could be supersaturated with respect to a different mineral e.g. an Na-rich zeolite, depending on the temperature. Numerous experiments have shown that the precipitation of a more stable phase at the mineral-fluid interface results in a coupling between the dissolution and the precipitation, and the replacement of one mineral by another. This process separates the short-range mechanisms which depend only on the composition of the interfacial solution, and the long-range consequences that depend on the composition of the residual fluid released from the reacting parent mineral. Typically such residual fluids may carry metal ions tens to hundreds of

  2. Injury experience in metallic mineral mining, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  3. Injury experience in metallic mineral mining, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  4. Deposit model for heavy-mineral sands in coastal environments: Chapter L in Mineral deposit models for resource assessment

    Science.gov (United States)

    Van Gosen, Bradley S.; Fey, David L.; Shah, Anjana K.; Verplanck, Philip L.; Hoefen, Todd M.

    2014-01-01

    This report provides a descriptive model of heavy-mineral sands, which are sedimentary deposits of dense minerals that accumulate with sand, silt, and clay in coastal environments, locally forming economic concentrations of the heavy minerals. This deposit type is the main source of titanium feedstock for the titanium dioxide (TiO2) pigments industry, through recovery of the minerals ilmenite (Fe2+TiO3), rutile (TiO2), and leucoxene (an alteration product of ilmenite). Heavy-mineral sands are also the principal source of zircon (ZrSiO4) and its zirconium oxide; zircon is often recovered as a coproduct. Other heavy minerals produced as coproducts from some deposits are sillimanite/kyanite, staurolite, monazite, and garnet. Monazite [(Ce,La,Nd,Th)PO4] is a source of rare earth elements as well as thorium, which is used in thorium-based nuclear power under development in India and elsewhere.

  5. Non-metallic coating thickness prediction using artificial neural network and support vector machine with time resolved thermography

    Science.gov (United States)

    Wang, Hongjin; Hsieh, Sheng-Jen; Peng, Bo; Zhou, Xunfei

    2016-07-01

    A method without requirements on knowledge about thermal properties of coatings or those of substrates will be interested in the industrial application. Supervised machine learning regressions may provide possible solution to the problem. This paper compares the performances of two regression models (artificial neural networks (ANN) and support vector machines for regression (SVM)) with respect to coating thickness estimations made based on surface temperature increments collected via time resolved thermography. We describe SVM roles in coating thickness prediction. Non-dimensional analyses are conducted to illustrate the effects of coating thicknesses and various factors on surface temperature increments. It's theoretically possible to correlate coating thickness with surface increment. Based on the analyses, the laser power is selected in such a way: during the heating, the temperature increment is high enough to determine the coating thickness variance but low enough to avoid surface melting. Sixty-one pain-coated samples with coating thicknesses varying from 63.5 μm to 571 μm are used to train models. Hyper-parameters of the models are optimized by 10-folder cross validation. Another 28 sets of data are then collected to test the performance of the three methods. The study shows that SVM can provide reliable predictions of unknown data, due to its deterministic characteristics, and it works well when used for a small input data group. The SVM model generates more accurate coating thickness estimates than the ANN model.

  6. Mining Industry Energy Bandwidth Study

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2007-07-01

    The Industrial Technologies Program (ITP) relies on analytical studies to identify large energy reduction opportunities in energy-intensive industries and uses these results to guide its R&D portfolio. The energy bandwidth illustrates the total energy-saving opportunity that exists in the industry if the current processes are improved by implementing more energy-efficient practices and by using advanced technologies. This bandwidth analysis report was conducted to assist the ITP Mining R&D program in identifying energy-saving opportunities in coal, metals, and mineral mining. These opportunities were analyzed in key mining processes of blasting, dewatering, drilling, digging, ventilation, materials handling, crushing, grinding, and separations.

  7. Export Taxes as a Legal Strategy to Protect South Africa’s Mineral Beneficiation Industry%出口税应作为保护南非选矿业的法律策略

    Institute of Scientific and Technical Information of China (English)

    André Thomashausen; 肖俊(译); 曲秋实(校); 曾建知(校)

    2013-01-01

    南非与中国签订的双边协定表明:不论在双边或多边领域,任何涉及双方利益的问题,南非应承担就该问题与中国进行协商的义务。其中,出口到中国的矿石是否应当征收出口税的问题即属于需要双方共同协商的问题。中国和南非的许多产业,其生存依赖于出口税。因此,两个国家应该一起研究出口税的未来,并反对欧盟与美国旨在WTO层面限制或禁止出口税的游说。%Bilateral agreements between South Africa and China show that repeated and several obligations have been assumed by South Africa to consult with China on al and any ‘matters of mutual interest in the bilateral and multilat-eral spheres’ . The introduction of an export tax on the export of ores that supply Chinese industries would be one such matter requiring consultation. Many indus-tries in China and South Africa depend on export taxes for their survival. Thus both nations together should study the future of export taxation and oppose EU and US lobbies aimed at restricting or prohibiting export taxes on WTO level.

  8. Mineral resources of Antarctica

    Science.gov (United States)

    Compiled and edited by Wright, Nancy A.; Williams, Paul L.

    1974-01-01

    Although the existence of mineral deposits in Antarctica is highly probable, the chances of finding them are quite small. Minerals have been found there in great variety but only as occurrences. Manganese nodules, water (as ice), geothermal energy, coal, petroleum, and natural gas are potential resources that could perhaps be exploited in the future. On the basis of known mineral occurrences in Antarctica and relationships between geologic provinces of Antarctica and those of neighboring Gondwana continents, the best discovery probability for a base-metal deposit in any part of Antarctica is in the Andean orogen; it is estimated to be 0.075 (75 chances in 1,000).

  9. Imaging of metals, metalloids, and non-metals by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) in biological tissues.

    Science.gov (United States)

    Becker, J Sabine; Becker, J Susanne

    2010-01-01

    The determination of the localization and distribution of essential and beneficial metals (e.g., Cu, Fe, Zn, Mn, Co, Ti, Al, Ca, K, Na, Cr and others), toxic metals (like Cd, Pb, Hg, U), metalloids (e.g., As, Se, Sb), and non-metals (such as C, S, P, Cl, I) in biological tissues is a challenging task for life science studies. Over the past few years, the development and application of mass spectrometric imaging (MSI) techniques for elements has been rapidly growing in the life sciences in order to investigate the uptake and the transport of both essential and toxic metals in plant and animal sections. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is a very sensitive and efficient trace, surface, and isotopic analytical technique for biological samples. LA-ICP-MS is increasingly utilized as an elemental mass spectrometric technique using double-focusing sector field (LA-ICP-SFMS) or quadrupole mass spectrometers (LA-ICP-QMS) to produce images of detailed regionally specific element distributions in thin biological tissue sections. Nowadays, MSI studies focus on brain research for studying neurodegenerative diseases such as Alzheimer's or Parkinson's, stroke, or tumor growth, or for the imaging of cancer biomarkers in tissue sections.The combination of the mass spectrometry imaging of metals by LA-ICP-MS with proteomics using biomolecular mass spectrometry (such as MALDI-MS or ESI-MS) to identify metal-containing proteins has become an important strategy in the life sciences. Besides the quantitative imaging of metals, non-metals and metalloids in biological tissues, LA-ICP-MS has been utilized for imaging metal-containing proteins in a 2D gel after electrophoretic separation of proteins. Recent progress in applying LA-ICP-MS in life science studies will be reviewed including the imaging of thin slices of biological tissue and applications in proteome analysis in combination with MALDI/ESI-MS to analyze metal-containing proteins.

  10. Reducing the extraction of minerals

    DEFF Research Database (Denmark)

    Bouzon, Marina; Govindan, Kannan; Rodriguez, Carlos Manuel Taboada

    2015-01-01

    the Multi-Criteria Decision Making (MCDM) tool named Interpretive Structural Modeling (ISM) to evaluate the relationship between the barrier categories. Logistics experts from machinery manufacturing industry sector in Brazil were consulted. The greater influence on all barrier categories is Policy related......Mass consumption and shortening product lifecycles have increased worldwide production. Consequently, more raw materials such as minerals are used, and available landfills are filling up. Companies are urged to effectively incorporate sustainability issues such as End-of-life (EOL) management...... and Reverse Logistics (RL) practices to close the loop and diminish the amount of raw materials used in their production systems. However, implementing RL implies dealing with its barriers. The purpose of this article is to focus on the recovery of EOL products that use mostly raw materials from the mining...

  11. Industrial Engineering

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

  12. Biotesting as a Method of Evaluating Waste Hazard in Metallic Mineral Mining

    Science.gov (United States)

    Lugovaya, Y. R.; Orlova, K. N.; Litovkin, S. V.; Malchik, A. G.; Gaydamak, M. A.

    2016-04-01

    As the result of identifying content of each chemical element it has been revealed that metallic mineral wastes have a considerable amount of valuable useful metals. Thus, large-tonnage inorganic wastes are considered to be an additional raw source of metal production. This paper highlights the necessity of supplementary biotesting metallic mineral wastes in order to bring into correlation with corresponding hazard classes and facilitate efficient recycling of these wastes in future. It has been found out that determined in this way waste class can be dumped or used after recycling. It has been also indicated that mill tailings are to be stored according to contained metals without messing up dissimilar metal-containing wastes. After winning metals these wastes are similar to the group of inorganic non-metallic wastes and can be used in building material production, for filling mined-out spaces, in road construction etc.

  13. Platinum-group elements in southern Africa: mineral inventory and an assessment of undiscovered mineral resources: Chapter Q in Global mineral resource assessment

    Science.gov (United States)

    Zientek, Michael L.; Causey, J. Douglas; Parks, Heather L.; Miller, Robert J.

    2014-01-01

    The platinum-group elements, platinum, palladium, rhodium, ruthenium, iridium, and osmium, possess unique physical and chemical characteristics that make them indispensable to modern technology and industry. However, mineral deposits that are the main sources of these elements occur only in three countries in the world, raising concerns about potential disruption in mineral supply. Using information in the public domain, mineral resource and reserve information has been compiled for mafic and ultramafic rocks in South Africa and Zimbabwe that host most of the world’s platinum-group element resources.

  14. Microbially mediated carbon mineralization: Geoengineering a carbon-neutral mine

    Science.gov (United States)

    Power, I. M.; McCutcheon, J.; Harrison, A. L.; Wilson, S. A.; Dipple, G. M.; Southam, G.

    2013-12-01

    Ultramafic and mafic mine tailings are a potentially valuable feedstock for carbon mineralization, affording the mining industry an opportunity to completely offset their carbon emissions. Passive carbon mineralization has previously been documented at the abandoned Clinton Creek asbestos mine, and the active Diavik diamond mine and Mount Keith nickel mine, yet the majority of tailings remain unreacted. Examples of microbe-carbonate interactions at each mine suggest that biological pathways could be harnessed to promote carbon mineralization. In suitable environmental conditions, microbes can mediate geochemical processes to accelerate mineral dissolution, increase the supply of carbon dioxide (CO2), and induce carbonate precipitation, all of which may accelerate carbon mineralization. Tailings mineralogy and the availability of a CO2 point source are key considerations in designing tailings storage facilities (TSF) for optimizing carbon mineralization. We evaluate the efficacy of acceleration strategies including bioleaching, biologically induced carbonate precipitation, and heterotrophic oxidation of waste organics, as well as abiotic strategies including enhancing passive carbonation through modifying tailings management practices and use of CO2 point sources (Fig. 1). With the aim of developing carbon-neutral mines, implementation of carbon mineralization strategies into TSF design will be driven by economic incentives and public pressure for environmental sustainability in the mining industry. Figure 1. Schematic illustrating geoengineered scenarios for carbon mineralization of ultramafic mine tailings. Scenarios A and B are based on non-point and point sources of CO2, respectively.

  15. [Synthetic mineral fibers].

    Science.gov (United States)

    Boillat, M A

    1999-03-27

    The group of man-made mineral fibres includes slagwool, glasswool, rockwool, glass filaments and microfibres, as well as refractory ceramic fibres. The toxicity of mineral fibres is determined by several factors such as the diameter (ceramic fibres. A slightly elevated standard mortality ratio for lung cancer has been documented in large cohorts of workers (USA, Europe and Canada) exposed to man-made mineral fibres, especially in the early technological phase. It is not possible to determine from these data whether the risk of lung cancer is due to the man-made mineral fibres themselves, in particular due to the lack of data on smoking habits. No increased risk of mesothelioma has been demonstrated in these cohorts. Epidemiological data are insufficient at this time concerning neoplastic diseases in refractory ceramic fibres.

  16. Minerals in environmental technology

    Energy Technology Data Exchange (ETDEWEB)

    Schuiling, R.D. [Utrecht Univ., Utrecht (Netherlands). Faculty of Earth Sciences

    2000-07-01

    Minerals play a key role in the environment; this role is often not well understood, because the emphasis of most environmentalists is on air, water, or the composition of solid wastes as a whole, without paying attention to their mineralogical composition. Several minerals can serve as effective and cheap adsorbents for many toxic chemicals. Several minerals can be used as a cheap substitute for expensive chemicals in environmental technologies. Environmental technologies that produce an economically interesting mineral will have an edge over competing technologies. Most of the problems, overreaction, panicky and expensive measures with regard to exposure from quartz and asbestos stem from a poor understanding of natural levels of common contaminants, a disregard for mineralogy, and a lack of insight into natural processes in general.

  17. sequenceMiner algorithm

    Data.gov (United States)

    National Aeronautics and Space Administration — Detecting and describing anomalies in large repositories of discrete symbol sequences. sequenceMiner has been open-sourced! Download the file below to try it out....

  18. Vitamins and Minerals

    Science.gov (United States)

    ... minerals your body needs. But if you're skipping meals, dieting, or if you're concerned that ... Kids For Parents MORE ON THIS TOPIC Healthy Breakfast Planner Nutrition & Fitness Center Vitamin D Figuring Out ...

  19. Multi-Perspectives’ Comparisons and Mitigating Implications for the COD and NH3-N Discharges into the Wastewater from the Industrial Sector of China

    Directory of Open Access Journals (Sweden)

    Junsong Jia

    2017-03-01

    Full Text Available Taking China as a case study, we analyzed the underlying driving forces of two discharges—chemical oxygen demand (COD and ammonia nitrogen (NH3-N—from both periodic and structural perspectives by the Logarithmic Mean Divisia Index (LMDI method. Changes in the two discharges were decomposed into three effects: the economic output effect, the industrial structure effect and the discharge intensity effect. The discharge intensity effect could be further decomposed into the cleaner production (technologies’ effect and the pollution abatement (technologies’ effect. Results showed that the economic output effect was mainly responsible for the growth of the two discharges; the average annual contribution rates were 10.77% and 10.39%, respectively. Inversely, the pollution abatement (technologies’ effect presented the most obvious mitigating effects (−9.71% and −9.52%, respectively. Furthermore, the clean production (technologies’ effect followed it (−4.36% and −5.22%. So, we found that the discharge intensity effect played a crucial role in the reduction of the two discharges. Then, the mitigation effect of industrial structure adjustment was the weakest (−0.19% and 0.47%. However, we could still not ignore the potential impact of industrial structure optimization for reducing the absolute amount of discharges in the long run. In addition, to simultaneously reduce the COD and NH3-N discharges, the sub-sectors of “Processing of Food from Agricultural Products (I7”, “Manufacture of Foods (I8”, “Manufacture of Raw Chemical Materials and Chemical Products (I20”, “Manufacture of Non-metallic Mineral Products (I24” and “Smelting and Pressing of Non-ferrous Metals (I26” were suggested to be given prior consideration for the design of related mitigation policies. Finally, some particular policy implications were also recommended for reducing the two discharges.

  20. Industrial Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund

    2011-01-01

    Industrial waste is waste from industrial production and manufacturing. Industry covers many industrial sectors and within each sector large variations are found in terms of which raw materials are used, which production technology is used and which products are produced. Available data on unit...... generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...

  1. Industrial Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund

    2011-01-01

    of the system industry has to inform at the planning stage and afterwards in yearly reports on their waste arising and how the waste is managed. If available such information is very helpful in obtaining information about that specific industry. However, in many countries there is very little information......Industrial waste is waste from industrial production and manufacturing. Industry covers many industrial sectors and within each sector large variations are found in terms of which raw materials are used, which production technology is used and which products are produced. Available data on unit...... generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...

  2. Mathematical model for bone mineralization

    Directory of Open Access Journals (Sweden)

    Svetlana V Komarova

    2015-08-01

    Full Text Available Defective bone mineralization has serious clinical manifestations, including deformities and fractures, but the regulation of this extracellular process is not fully understood. We have developed a mathematical model consisting of ordinary differential equations that describe collagen maturation, production and degradation of inhibitors, and mineral nucleation and growth. We examined the roles of individual processes in generating normal and abnormal mineralization patterns characterized using two outcome measures: mineralization lag time and degree of mineralization. Model parameters describing the formation of hydroxyapatite mineral on the nucleating centers most potently affected the degree of mineralization, while the parameters describing inhibitor homeostasis most effectively changed the mineralization lag time. Of interest, a parameter describing the rate of matrix maturation emerged as being capable of counter-intuitively increasing both the mineralization lag time and the degree of mineralization. We validated the accuracy of model predictions using known diseases of bone mineralization such as osteogenesis imperfecta and X-linked hypophosphatemia. The model successfully describes the highly non-linear mineralization dynamics, which includes an initial lag phase when osteoid is present but no mineralization is evident, then fast primary mineralization, followed by secondary mineralization characterized by a continuous slow increase in bone mineral content. The developed model can potentially predict the function for a mutated protein based on the histology of pathologic bone samples from mineralization disorders of unknown etiology.

  3. Mineral biotechnology. Microbial aspects of mineral beneficiation, metal extraction, and environmental control

    Energy Technology Data Exchange (ETDEWEB)

    Kawatra, S.K.; Natarajan, K.A. (eds.)

    2001-07-01

    Papers in this book illustrate the utility of mineral biotechnology with respect to biobeneficiation, bioleaching, bioremediation and biomineralization. Papers of particular interest to the coal industry include: depression of pyrite flotation by yeast and bacteris (S.K. Kawatra and T.C. Eisele); desulfurization of coal by microbial flotation in a semicontinuous system (T. Nagaoka and others); biochemical removal of HAP precursors from coal - INEEL slurry column testing (K.S. Noah and G.J. Olson); microorganisms, biotechnology and acid rock drainage - emphasis on passive-biological control and treatment methods (N. Kuyucak); and utility of bioreagents in mineral processing (P. Somasundaran and others).

  4. CHEMICAL CONTROL OF THE TOMATO LEAF MINER Scrobipalpuloides absoluta (MEYRICK USING A NEW INSETICIDE INHIBITOR OF ECDYSIS CONTROLE QUÍMICO DA Scrobipalpuloides absoluta Meyrick, 1971 SOBRE TOMATEIRO INDUSTRIAL COM INSETICIDA FISIOLÓGICO INIBIDOR DA ECDISE

    Directory of Open Access Journals (Sweden)

    Antônio Lopes da Silva

    2007-09-01

    Full Text Available

    The tomato leafminer (Scrobipalpuloides absoluta, a common pest of tomato plant, is distributed in many regions in Brazil. In order to determine the efficiency of Chlorfluazuron to control the tomato leafminer, a field experiment was carried out in Goiânia, Goiás state, Brazil. The treatment and dosage in grams of active ingredient per hectare were: Chlorfluazuron 50 EC (25,35.5,50 and 75; Abamectin 18 EC (18; Cartap 500 BR (480 and an untreated check. The results of the experiment showed that Chlorfluazuron at dosages of 37.5, 50 and 75 g i.a./ha was efficient in controlling the tomato leafminer. It was similar to the results of abamectin and cartap at the dosages utilized.

    KEY-WORDS: Scrobipalpuloides absoluta; tomato plants; chemical control.

    Foi realizado, no município de Goiânia (GO, no período de maio a outubro de 1994, um experimento visando ao controle químico da traça (S. absoluta no tomateiro, cultura rasteira. O delineamento experimental foi de blocos ao acaso com sete tratamentos em quatro repetições. Cada unidade experimental foi constituída de quatro linhas com cinco metros de comprimento, um metro entre linhas da cultivar Roma VF. Os produtos utilizados foram: Atabron 50 CE (Clorfluazuron nas doses de 0,5; 0,75; 1,0 e 1,5 litro por hectare do produto comercial; Vertimec 18 CE (Abamectin: 1,0 litro por hectare, acrescido de 0,25% de óleo mineral; Cartap 500 BR (Cartap na dose de 0,96 kg/hectare; e uma testemunha. Foram realizadas quatro aplicações consecutivas, semanalmente, a partir do aparecimento dos primeiros adultos da praga na cultura, gastando-se 1.000 litros de

  5. Advances in industrial ergonomics and safety I

    Energy Technology Data Exchange (ETDEWEB)

    Mital, A. (ed.) (University of Cincinnati, Cincinnati, OH (USA). Dept. of Mechanical and Industrial Engineering, Ergonomics Research Lab.)

    1989-01-01

    125 papers are presented under the session headings: industrial ergonomics - programs and applications; applied work physiology; occupational biomechanics; engineering anthropometry; work and protective clothing; hand tools; human-computer interface; theory and practice of industrial safety; human perception and performance; human strengths; industrial noise and vibration; machine guarding and industrial machine safety; manual materials handling; modelling for safety and health; occupational injuries and health problems; policies and standards; quality control and inspection; rehabilitation and designing for the disabled; work duration and fatigue; and work and work place design. Includes papers on static and dynamic back strength of underground coal miners, and slip and fall accidents during equipment maintenance in the surface mining industry.

  6. Caracterização dos argilominerais usados em matéria-prima cerâmica, da formação Rio do Rasto, Bacia do Paraná, no município de Turvo, SC Characterization of clay minerals used in the ceramic industry, from Rio do Rasto formation, Paraná basin, exploitation in Turvo, SC, Brazil

    Directory of Open Access Journals (Sweden)

    J. A. Costa

    2010-12-01

    Full Text Available No sudeste de Santa Catarina existem inúmeras minas de exploração de argilas destinadas à indústria cerâmica da região. Para o conhecimento desta matéria prima foi realizada a caracterização em detalhe de uma frente de lavra em atividade. A exploração é realizada em terrenos sedimentares da Formação Rio do Rasto (Permiano Superior na Bacia do Paraná que afloram como morros testemunho. Foram coletadas quatorze amostras representativas dos níveis desta mina composta de argilitos com intercalação de siltitos de pequena espessura. As amostras foram analisadas por difratometria de raios X pelo método do pó na rocha total e na fração In the southeastern part of Santa Catarina state, Brazil, many mines of clays used as raw material for the ceramic industry are found. A detail study of this material was developed in a mine in activity. The exploitation of clays is held in sedimentary rocks of Rio do Rasto Formation (Upper Permian in the Paraná Basin. The outcrops are in hills testimonies. Fourteen samples were collected and represent the levels of this mine which consisted of argillites with intercalation of slim siltite layer. These samples were analyzed by X-ray diffraction using the powder method and in the fraction < 4 µm. The chemical composition was determined by X-ray fluorescence spectrometer. Petrographic observations in thin section were also performed. Scanning electron microscope images was obtained in samples fragments by secondary electron method. Electron microprobe microanalysis was performed in one thin section. The results showed large vertical variation in the mineralogy and it has been identified three different levels. Up to 2.00 m there is a predominance of smectite. Between 5.50 m 2.00 m the smectite is the main clay mineral, but with significant amounts of illite/mica and above 5.50 m occurs large increase in K-feldspar and detrital mica. Studies in detail by X-ray diffraction (determination of the b

  7. The geology of aluminium phosphates and sulphates of the alunite group minerals: a review

    Science.gov (United States)

    Dill, Harald G.

    2001-03-01

    to 1 kbar. The various APS mineralizations in nature occur in three zones; a fourth zone may be singled out when the enrichment of APS compounds in waste dumps, in acid mine drainage and during alum production is considered as part of the story. Zone I encompasses APS mineralization observed in metamorphic rocks of lowermost greenschist facies and igneous rocks that have undergone advanced argillic alteration with or without hydrothermal ore and non-metal mineralizations. Zone II following vertically upward in the earth crust is characterised by steam-heated, connate water- and ground water-related APS mineralization. This sort of APS mineralization forms close to the boundary between the vadose and phreatic hydraulic stockwork. The overlying zone III is confined to the topmost part of the vadose or infiltration zone. Its mineralization originated from meteoric waters and may be called supergene in the strict sense. Results obtained from the study of this kind of mineralization can directly be applied to artificial accumulation of APS compounds at the present-day surface. A combination of chemical measures such as S-O-H isotopes and REE variation together with experimentally based mineralogical data may be instrumental in the distinction of supergene and hypogene APS mineralization. This set of data may also assist in the assignment of APS mineralization either to hydrothermal magmatic or to steam-heated acid sulphate mineralizations. The K-bearing end members of the APS s.s.s. have proven to be an efficient tool to determine the age of formation of magmatic, weathering, diagenetic and alteration processes. APS minerals, however, can locally provide much more information to the origin of host and parent rocks than the rock-forming minerals themselves, which make up the host rocks of APS mineralization.

  8. Measuring the Hardness of Minerals

    Science.gov (United States)

    Bushby, Jessica

    2005-01-01

    The author discusses Moh's hardness scale, a comparative scale for minerals, whereby the softest mineral (talc) is placed at 1 and the hardest mineral (diamond) is placed at 10, with all other minerals ordered in between, according to their hardness. Development history of the scale is outlined, as well as a description of how the scale is used…

  9. Extraterrestrial magnetic minerals

    Science.gov (United States)

    Pechersky, D. M.; Markov, G. P.; Tsel'movich, V. A.; Sharonova, Z. V.

    2012-07-01

    Thermomagnetic and microprobe analyses are carried out and a set of magnetic characteristics are measured for 25 meteorites and 3 tektites from the collections of the Vernadsky Geological Museum of the Russian Academy of Sciences and Museum of Natural History of the North-East Interdisciplinary Science Research Institute, Far Eastern Branch of the Russian Academy of Sciences. It is found that, notwithstanding their type, all the meteorites contain the same magnetic minerals and only differ by concentrations of these minerals. Kamacite with less than 10% nickel is the main magnetic mineral in the studied samples. Pure iron, taenite, and schreibersite are less frequent; nickel, various iron spinels, Fe-Al alloys, etc., are very rare. These minerals are normally absent in the crusts of the Earth and other planets. The studied meteorites are more likely parts of the cores and lower mantles of the meteoritic parent bodies (the planets). Uniformity in the magnetic properties of the meteorites and the types of their thermomagnetic (MT) curves is violated by secondary alterations of the meteorites in the terrestrial environment. The sediments demonstrate the same monotony as the meteorites: kamacite is likely the only extraterrestrial magnetic mineral, which is abundant in sediments and associated with cosmic dust. The compositional similarity of kamacite in iron meteorites and in cosmic dust is due to their common source; the degree of fragmentation of the material of the parent body is the only difference.

  10. Design and Realization of Mineral Feeding SCADA System

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The grinding process in concentration plants of the metallurgical industry is of great importantce.. A mineral feeding SCADA system in the grinding process was designed with the idea of integrating management and control functions. A detailed design and realization method of control and supervisory control levels in the system was introduced. At the control level, with an algorithm of a separate integrated PID, four mineral feeding machines are run in turn. The supervisory control level can generate process flow graphs, statistical report forms, historical trends and at the same time, it has the functions of alarm, system administration, user login, etc. After the mineral SCADA system has been started, the mineral feeding is very stable, the workstation completely supervises and controls the entire process of mineral feeding, and at the same time historical data is shown and questions can be answered conveniently. The system runs well in the MeiShan Concentration Plant of the Shanghai Bao Shan Steel Group.

  11. Mineral supply for sustainable development requires resource governance

    Science.gov (United States)

    Ali, Saleem H.; Giurco, Damien; Arndt, Nicholas; Nickless, Edmund; Brown, Graham; Demetriades, Alecos; Durrheim, Ray; Enriquez, Maria Amélia; Kinnaird, Judith; Littleboy, Anna; Meinert, Lawrence D.; Oberhänsli, Roland; Salem, Janet; Schodde, Richard; Schneider, Gabi; Vidal, Olivier; Yakovleva, Natalia

    2017-03-01

    Successful delivery of the United Nations sustainable development goals and implementation of the Paris Agreement requires technologies that utilize a wide range of minerals in vast quantities. Metal recycling and technological change will contribute to sustaining supply, but mining must continue and grow for the foreseeable future to ensure that such minerals remain available to industry. New links are needed between existing institutional frameworks to oversee responsible sourcing of minerals, trajectories for mineral exploration, environmental practices, and consumer awareness of the effects of consumption. Here we present, through analysis of a comprehensive set of data and demand forecasts, an interdisciplinary perspective on how best to ensure ecologically viable continuity of global mineral supply over the coming decades.

  12. Longshoring Industry

    Science.gov (United States)

    2001-01-01

    a)(1). (5) ANSI Z-89.1-1986, Personnel Protection-Protective Headwear for Industrial Workers-Requirements; IBR approved for 1917.93(b). (6) ANSI Z-41... Headwear for Industrial Workers-Requirements.” (c) Protective hats previously worn shall be cleaned and disinfected before issuance by the employer to... Headwear for Industrial Workers-Requirements; IBR approved for §1918.103(b). (6) ANSI Z-41-1991, American National Standard for Personal Protection

  13. Biotechnology Industry

    Science.gov (United States)

    2007-01-01

    Countries Growing GMO , 2007). Herbicide and insect resistance traits will continue to be pursued since 25% of food crops are lost each year to insect...daily lives from the clothing we wear, the fuel we use, the food we eat, and the medicines we take. From the earliest days, humans have used the...industry is very broad and includes health care, food , agriculture, industrial, and environmental industries. It is one of the fastest growing sciences

  14. Characterization of clay minerals; Caracterizacion de minerales arcillosos

    Energy Technology Data Exchange (ETDEWEB)

    Diaz N, C.; Olguin, M.T.; Solache R, M.; Alarcon H, T.; Aguilar E, A. [Gerencia de Ciencias Basicas, Direccion de Investigacion Cientifica, Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    The natural clays are the more abundant minerals on the crust. They are used for making diverse industrial products. Due to the adsorption and ion exchange properties of these, a great interest for developing research directed toward the use of natural clays for the waste water treatment has been aroused. As part of such researches it is very important to carry out previously the characterization of the interest materials. In this work the results of the mineral and elemental chemical composition are presented as well as the morphological characteristics of clay minerals from different regions of the Mexican Republic. (Author)

  15. Geoelectrical Signatures Of Microbial Stimulated Mineralization

    Science.gov (United States)

    Personna, Y. R.; Ntarlagiannis, D.; Slater, L.; O Brien, M.; Hubbard, S.; Williams, K. H.

    2007-05-01

    Bioremediation techniques are commonly utilized to address soil and groundwater contamination due to acid- mine drainage, industrial sources, and government nuclear weapon programs. One critical component of these efforts is the real time, spatially accurate monitoring of the remediation processes. For this reason non-invasive high resolution geophysical methods have been employed in the recent years to elucidate system transformations occurring during bioremediation. In our study, we performed laboratory column experiments to investigate the geoelectrical response of microbe-mediated iron sulfide (FeS) precipitation accompanying stimulated sulfate-reduction; a bioremediation technique currently utilized for the sequestration of heavy metals in the subsurface. In order to monitor the biomineralization process, we used two geoelectrical methods - induced polarization (IP) and self-potential (SP) - in conjunction with conventional geochemical measurements. The IP data showed significant anomalies associated with ongoing FeS mineralization accompanying microbial activity. The magnitude of the IP response can be considered a proxy for the mass of minerals accumulating in the pore space and may provide insight into the aggregation state of the mineralization. Additionally, strong SP anomalies developed during the mineralization as a result of the continuous redox state changes following the microbial induced mineral formation. Visibly black precipitates accumulated with the column indicating FeS precipitation, and high H2S content confirmed the observed geochemical and geophysical data. Overall, the results suggest that the IP and SP methods can be used to monitor the progress of the microbial induced mineralization process associated with the precipitation of insoluble metal sulfides, and indirectly monitor the microbial activity within the subsurface. These methods can be valuable tools to increase the efficiency of bioremediation techniques.

  16. Estimation of palaeohydrochemical conditions using carbonate minerals

    Science.gov (United States)

    Amamiya, H.; Mizuno, T.; Iwatsuki, T.; Yuguchi, T.; Murakami, H.; Saito-Kokubu, Y.

    2014-12-01

    The long-term evolution of geochemical environment in deep underground is indispensable research subject for geological disposal of high-level radioactive waste, because the evolution of geochemical environment would impact migration behavior of radionuclides in deep underground. Many researchers have made efforts previously to elucidate the geochemical environment within the groundwater residence time based on the analysis of the actual groundwater. However, it is impossible to estimate the geochemical environment for the longer time scale than the groundwater residence time in this method. In this case, analysis of the chemical properties of secondary minerals are one of useful method to estimate the paleohydrochemical conditions (temperature, salinity, pH and redox potential). In particular, carbonate minerals would be available to infer the long-term evolution of hydrochemical for the following reasons; -it easily reaches chemical equilibrium with groundwater and precipitates in open space of water flowing path -it reflects the chemical and isotopic composition of groundwater at the time of crystallization We reviewed the previous studies on carbonate minerals and geochemical conditions in deep underground and estimated the hydrochemical characteristics of past groundwater by using carbonate minerals. As a result, it was found that temperature and salinity of the groundwater during crystallization of carbonate minerals were evaluated quantitatively. On the other hand, pH and redox potential can only be understood qualitatively. However, it is suggested that the content of heavy metal elements such as manganese, iron and uranium, and rare earth elements in the carbonate minerals are useful indicators for estimating redox potential. This study was carried out under a contract with METI (Ministry of Economy, Trade and Industry) as part of its R&D supporting program for developing geological disposal technology.

  17. EU Commission suggests to talk about policies to ensure the continuity of energy supply in the future. Germany's mineral oil industry favours the competitive market and is against regulatory restrictions to competition; Bruessel regt Diskussion ueber Energieversorgungssicherheit an. Mineraloelindustrie setzt auf Wettbewerb statt Regulierung

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2001-04-01

    With its Greenbook entitled 'Towards a European strategy for ensured continuity of energy supply' the European Commission recently initiated discussions within the EU about the necessity to focus European energy policy on new lines in order to be prepared to handle foreseeable developments and challenges such as: a growing dependence on energy imports, induced by a growing demand for energy and simultaneous depletion of energy resources in Europe; greenhouse gas emissions and the climate issue. The European Commission propagates the need for EU-wide regulatory action and enlarged competences of the EC for energy policy decisions. The German mineral oil industry accepts the analysis of the EC but comes to entirely different conclusions, which are presented in the article. (orig./CB) [German] Mit ihrem Gruenbuch 'Hin zu einer europaeischen Strategie fuer Energieversorgungssicherheit' hat die Europaeische Kommission eine energiepolitische Diskussion ueber die Notwendigkeit neuer Akzente in der europaeischen Energiepolitik eingeleitet. Die Kommission rechnet auf Grund eines wachsenden Energiebedarfs und gleichzeitig abnehmender Energieressourcen in Europa in den kommenden Jahrzehnten mit einer zunehmenden Importabhaengigkeit. Gleichzeitig steht die Kommission vor der klimapolitischen Herausforderung, die energiebedingten Emissionen von Klimagasen spuerbar zu reduzieren. Diese Anforderungen an die kuenftige Energieversorgung lassen sich nach Einschaetzung der Kommission nur auf der Grundlage erweiterter Kompetenzen fuer eine europaeische Energiepolitik bewaeltigen. Die deutsche Mineraloelindustrie teilt zwar die analytische Einschaetzung der Euorpaeischen Union (EU), die Konsequenzen jedoch nicht. Nachfolgend werden einige Kernaussagen des Mineraloelwirtschaftsverbandes e.V. (MWV), Hamburg, zum Gruenbuch wiedergegeben. (orig./CB)

  18. Industrial Communications.

    Science.gov (United States)

    Lindsay, Dan

    Intended for seniors planning a career in industry as skilled laborers, this specialized course in Industrial Communications offers the student basic communications skills which he will need in his work and in his daily life. Since class activities center around short, factual oral reports, class size will be limited to 20, providing a maximum of…

  19. Mineral Processing Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-09-01

    This document represents the roadmap for Processing Technology Research in the US Mining Industry. It was developed based on the results of a Processing Technology Roadmap Workshop sponsored by the National Mining Association in conjunction with the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held January 24 - 25, 2000.

  20. Industry honoured

    CERN Multimedia

    2008-01-01

    CERN has organised a day to thank industry for its exceptional contributions to the LHC project. Lucio Rossi addresses CERN’s industrial partners in the Main Auditorium.The LHC inauguration provided an opportunity for CERN to thank all those who have contributed to transforming this technological dream into reality. Industry has been a major player in this adventure. Over the last decade it has lent its support to CERN’s teams and participating institutes in developing, building and assembling the machine, its experiments and the computing infrastructure. CERN involved its industrial partners in the LHC inauguration by organising a special industry prize-giving day on 20 October. Over 70 firms accepted the invitation. The firms not only made fundamental contributions to the project, but some have also supported LHC events in 2008 and the inauguration ceremony through generous donations, which have been coordinated by Carmen Dell’Erba, who is responsible for secu...

  1. Construction of stable Ta3N5/g-C3N4 metal/non-metal nitride hybrids with enhanced visible-light photocatalysis

    Science.gov (United States)

    Jiang, Yinhua; Liu, Peipei; Chen, YeCheng; Zhou, Zhengzhong; Yang, Haijian; Hong, Yuanzhi; Li, Fan; Ni, Liang; Yan, Yongsheng; Gregory, Duncan H.

    2017-01-01

    In this paper, a novel Ta3N5/g-C3N4 metal/non-metal nitride hybrid was successfully synthesized by a facile impregnation method. The photocatalytic activity of Ta3N5/g-C3N4 hybrid nitrides was evaluated by the degradation of organic dye rhodamine B (RhB) under visible light irradiation, and the result indicated that all Ta3N5/g-C3N4 samples exhibited distinctly enhanced photocatalytic activities for the degradation of RhB than pure g-C3N4. The optimal Ta3N5/g-C3N4 composite sample, with Ta3N5 mass ratio of 2%, demonstrated the highest photocatalytic activity, and its degradation rate constant was 2.71 times as high as that of pure g-C3N4. The enhanced photocatalytic activity of this Ta3N5/g-C3N4 metal/metal-free nitride was predominantly attributed to the synergistic effect which increased visible-light absorption and facilitated the efficient separation of photoinduced electrons and holes. The Ta3N5/g-C3N4 hybrid nitride exhibited excellent photostability and reusability. The possible mechanism for improved photocatalytic performance was proposed. Overall, this work may provide a facile way to synthesize the highly efficient metal/metal-free hybrid nitride photocatalysts with promising applications in environmental purification and energy conversion.

  2. Mineralization of fossil wood

    NARCIS (Netherlands)

    Buurman, P.

    1972-01-01

    Several pieces of fossil wood have been analyzed with X-ray diffraction and were grouped on the basis of mineralogical composition. Various mineralizations were studied in thin sections and by means of the scanning electron microscope. Wood-opals appear to show a structure preservation that points t

  3. Clay Mineral: Radiological Characterization

    Science.gov (United States)

    Cotomácio, J. G.; Silva, P. S. C.; Mazzilli, B. P.

    2008-08-01

    Since the early days, clays have been used for therapeutic purposes. Nowadays, most minerals applied as anti-inflammatory, pharmaceutics and cosmetic are the clay minerals that are used as the active ingredient or, as the excipient, in formulations. Although their large use, few information is available in literature on the content of the radionuclide concentrations of uranium and thorium natural series and 40K in these clay minerals. The objective of this work is to determine the concentrations of 238U, 232Th, 226Ra, 228Ra, 210Pb and 40K in commercial samples of clay minerals used for pharmaceutical or cosmetic purposes. Two kinds of clays samples were obtained in pharmacies, named green clay and white clay. Measurement for the determination of 238U and 232Th activity concentration was made by alpha spectrometry and gamma spectrometry was used for 226Ra, 228Ra, 210Pb and 40K determination. Some physical-chemical parameters were also determined as organic carbon and pH. The average activity concentration obtained was 906±340 Bq kg-1 for 40K, 40±9 Bq kg-1 for 226Ra, 75±9 Bq kg-1 for 228Ra, 197±38 Bq kg-1 for 210Pb, 51±26 Bq kg-1 for 238U and 55±24 Bq kg-1 for 232Th, considering both kinds of clay.

  4. Mixtures and mineral reactions

    Energy Technology Data Exchange (ETDEWEB)

    Saxena, S.; Ganguly, J.

    1987-01-01

    Considerable progress has been made in our understanding of the physicochemical evolution of natural rocks through systematic analysis of the compositional properties and phase relations of their mineral assemblages. This book brings together concepts of classical thermodynamics, solution models, and atomic ordering and interactions that constitute a basis of such analysis, with examples of application to subsolidus petrological problems.

  5. Tannins in Mineral Processing and Extractive Metallurgy

    Directory of Open Access Journals (Sweden)

    Jordan Rutledge

    2015-08-01

    Full Text Available This study provides an up to date review of tannins, specifically quebracho, in mineral processing and metallurgical processes. Quebracho is a highly useful reagent in many flotation applications, acting as both a depressant and a dispersant. Three different types of quebracho are mentioned in this study; quebracho “S” or Tupasol ATO, quebracho “O” or Tupafin ATO, and quebracho “A” or Silvafloc. It should be noted that literature often refers simply to “quebracho” without distinguishing a specific type. Quebracho is most commonly used in industry as a method to separate fluorite from calcite, which is traditionally quite challenging as both minerals share a common ion—calcium. Other applications for quebracho in flotation with calcite minerals as the main gangue source include barite and scheelite. In sulfide systems, quebracho is a key reagent in differential flotation of copper, lead, zinc circuits. The use of quebracho in the precipitation of germanium from zinc ores and for the recovery of ultrafine gold is also detailed in this work. This analysis explores the wide range of uses and methodology of quebracho in the extractive metallurgy field and expands on previous research by Iskra and Kitchener at Imperial College entitled, “Quebracho in Mineral Processing”.

  6. Characterization of Mexican zeolite minerals; Caracterizacion de minerales zeoliticos mexicanos

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez C, M.J

    2005-07-01

    50% of the Mexican territory is formed by volcanic sequences of the Pliocene type, which appear extensively in the northwest states (Sonora, Sinaloa, Chihuahua, Durango) and west of Mexico (Jalisco and Nayarit), in central Mexico (Zacatecas, Guanajuato, San Luis Potosi, Queretaro, Hidalgo) and south of Mexico (Guerrero, Oaxaca); therefore, it is to be expected that in our country big locations of natural zeolites exist in its majority of the clinoptilolite type. The present study was focused toward the characterization of two Mexican natural zeolite rocks presumably of the clinoptilolite and filipsite types, one of them comes from the state of Chihuahua and the other of a trader company of non metallic minerals, due that these materials are not characterized, its are not known their properties completely and therefore, the uses that can be given to these materials. In this investigation work it was carried out the characterization of two Mexican zeolite rocks, one coming from the Arroyo zone, municipality of La Haciendita, in the state of Chihuahua; and the other one was bought to a trader company of non metallic minerals. The two zeolites so much in their natural form as conditioned with sodium; they were characterized by means of X-ray diffraction, scanning electron microscopy of high vacuum and elementary microanalysis (EDS), surface area analysis (BET), thermal gravimetric analysis. To differentiate the heulandite crystalline phase of the other clinoptilolite rock, its were carried out thermal treatments. The quantification of Al, Na, Ca, K, Mg, Fe was carried out in solution, by means of atomic absorption spectroscopy and the quantity of Si was determined by gravimetry. The zeolite rocks presented for the major part the crystalline heulandite and clinoptilolite phases for the most part, and it was found that the zeolite coming from the state of Chihuahua possesses a bigger content of heulandite and the denominated filipsite it is really a zeolite

  7. Breaking new ground: mining, minerals and sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    Society's continuing need for minerals is clear. However, the way in which minerals are extracted, processed, used and recycled - in the context of sustainable development - is less than clear and often bitterly controversial. This publication presents the principal conclusions of the IIED/WBCSD project Mining, Minerals and Sustainable Development (MMSD) - the most ambitious study yet undertaken on the role of minerals in sustainable development carried out by the IIED and World Bank Council for Sustainable Development (WBCSD). Drawing on the project's two-year process of consultation and research, Breaking New Ground describes the minerals sector and its relationship with concepts of sustainable development, and offers an 'Agenda for Change' for immediate and future actions. The report is based on four regional processes, activities in 16 countries and over 200 pieces of commissioned research contained in an accompanying CD-ROM. The report calls for elaboration of an industry protocol for sustainable development; a commitment to address the negative legacy of the past; support for legalization of artisanal and small-scale mining; integrated management of the full mineral chain (exploration, extraction, smelting, refining, fabrication, manufacturing, use, reuse, recycling and disposal); more effective government management of mineral investment; and a more equitable international trade regime for minerals.

  8. A century of miners' compensation in South Africa.

    Science.gov (United States)

    Ehrlich, Rodney

    2012-06-01

    The year 2011 marked the centenary of compensation legislation for miners' lung disease in South Africa. This commentary aims to demonstrate that the current compensation system does not serve its intended beneficiaries, particularly the large population of former gold miners affected by high rates of silicosis and tuberculosis. The system has a complex legislative history, reflecting contending political, and economic forces, and characterized by racial discrimination. The financial basis of the system is currently in crisis owing to historical underfunding and failure to take into account the mounting burden of disease among black former miners. The real value of compensation awards fell sharply between 1973 and 1993, only partly recovering in recent years. Barriers to claiming benefits, particularly by black former miners who know little about the process, have been extensively documented. Integration of miners' compensation into general workers' compensation has been mooted since the 1980s but has stalled, owing to the high cost of closing the gap between the mostly inferior financial benefits under the mining legislation and those available under workers' compensation legislation. A recent constitutional court decision has opened the way for unprecedented civil litigation against the gold mining industry for silicosis, adding to the pressure for reform. A number of changes are called for: harmonization of financial benefits with retention of certain of the special arrangements for miner claims, a regional cross-border system of medical examination points for former miners, education of miners about the system, and some degree of privatization of claims processing.

  9. Mineral resource of the month: platinum group metals

    Science.gov (United States)

    Loferski, Patricia J.

    2010-01-01

    The article focuses on platinum group metals (PGMs) and their properties. According to the author, PGMs, which include iridium, osmium, palladium, platinum, rhodium, and ruthenium, are among the rarest mineral commodities in the Earth's crust. PGMs are primarily used as catalytic converters that clean harmful exhaust from vehicle engines. They are also used in the chemical industry as catalysts in the production of nitric acid and in the petroleum refining industry.

  10. Carbon Mineral Ecology: Predicting the Undiscovered Minerals of Carbon

    Science.gov (United States)

    Hazen, R. M.; Hummer, D. R.; Downs, R. T.; Hystad, G.; Golden, J.

    2015-12-01

    The diversity and distribution of Earth's minerals through deep time reflects key events in our planet's crustal evolution. Studies in mineral ecology exploit mineralogical databases to document diversity-distribution relationships of minerals, which reveal that all carbon-bearing minerals, as well as subsets containing C with O, H, Ca, or Na, conform to Large Number of Rare Events (LNRE) distributions. LNRE models facilitate prediction of total mineral diversity, and thus point to minerals that exist on Earth but have not yet been discovered and described. Our model predicts that at least 548 C minerals exist on Earth today, indicating that at least 145 carbon-bearing mineral species have yet to be discovered. Furthermore, by analyzing subsets of the most common additional elements in carbon-bearing minerals (i.e., 378 C + O species; 282 C + H species; 133 C + Ca species; and 100 C + Na species), we predict that 129 of these missing carbon minerals contain oxygen, 118 contain hydrogen, 52 contain calcium, and more than 60 contain sodium. The majority of these as yet undescribed minerals are predicted to be hydrous carbonates, many of which may have been overlooked because they are colorless, poorly crystalized, and/or water-soluble. We propose the identities of plausible as yet undescribed carbon minerals, as well as search strategies for their discovery. Some of these minerals will be natural examples of known synthetic compounds, including carbides such as calcium carbide (CaC2), crystalline hydrocarbons such as pyrene (C16H10), and numerous oxalates, anhydrous carbonates, and hydrous carbonates. Many other missing carbon minerals will be isomorphs of known carbon minerals, notably of the more than 100 different hydrous carbonate structures. An understanding of Earth's "missing" minerals provides a more complete picture of geochemical processes that influence crustal evolution.

  11. MINERAL RESOURCES OF THE SISAK REGION, CROATIA

    Directory of Open Access Journals (Sweden)

    Ivan Jurković

    1993-12-01

    Full Text Available In the paper, on the basis of the author's knowledge, for the first time, chronostratigraphic and genetic classification of all known mineral resources located in the central part of Croatia (Sisak, Petrinja, Glina, Dvor na Uni, Hrvatska Kostajnica and Novska, is given in more detail. Metallic and nonmetallic mineral resources, coal, oil, gas as well as drinking water, water for balneology and industry related spatially and/or genetically with the Upper Paleozoic, Mesozoic and Cenozoic deposits, are presented. Taking into consideration the present days level of research, the past extent of the exploitation as well as genetic potential of each own estimate of their long term prospects with regard to the economy of the Croatia (the paper is published in Croatian.

  12. Measurement and Modelling of Scaling Minerals

    DEFF Research Database (Denmark)

    Villafafila Garcia, Ada

    2005-01-01

    of scale formation found in many industrial processes, and especially in oilfield and geothermal operations. We want to contribute to the study of this problem by releasing a simple and accurate thermodynamic model capable of calculating the behaviour of scaling minerals, covering a wide range......-liquid equilibrium of sulphate scaling minerals (SrSO4, BaSO4, CaSO4 and CaSO4•2H2O) at temperatures up to 300ºC and pressures up to 1000 bar is described in chapter 4. Results for the binary systems (M2+, )-H2O; the ternary systems (Na+, M2+, )-H2O, and (Na+, M2+, Cl-)-H2O; and the quaternary systems (Na+, M2+)(Cl...

  13. Geoethical approach to mineral activities in Antarctica

    Science.gov (United States)

    Talalay, Pavel

    2013-04-01

    Antarctica is the outermost from civilization space continent. From 14.0 million km2 of surface area about 98% of Antarctica is covered by ice that averages at least 1.6 km in thickness. Geologically, the continent is the least explored in the world, and it is almost absolutely unknown what mineral resources Antarctica has as they are buried in rock that is covered by a thick ice sheet. It is thought to have large and valuable mineral deposits under the ice. This is because of what has been found in samples taken from the small areas of rock that are exposed, and also from what has been found in South Africa and South America. Up until 180 million years ago, Antarctica was a part of the Gondwanaland super continent, attached to South America, the Southern part of Africa, India and Australia, these continents then drifted apart until they reached their current positions. This leads to a possibility that Antarctica may also share some of the mineral wealth of these continents. Right now on the ice-free areas of Antarctica iron ore, chromium, copper, gold, nickel, platinum, coal and hydrocarbons have been found. The Protocol on Environmental Protection to the Antarctic Treaty, also known as the Madrid Protocol, was signed in 1991 by the signatories to the Antarctic Treaty and became law in January 1998. The Protocol provides for comprehensive protection of the Antarctic environment and associated ecosystems and includes a ban on all commercial mining for at least fifty years (this is up for review in 2041). Current climate change and melting ice in Polar Regions is opening up new opportunities to exploit mineral and oil resources. Even Antarctica's weather, ice and distance from any industrialized areas mean that mineral extraction would be extremely expensive and also extremely dangerous, the depletion of mineral recourses on the Earth can reverse banning of mining in Antarctica in future. There is no question that any resource exploitation in Antarctica will cause

  14. Mineral processing of heavy mineral sands from Malawi and Malaysia

    OpenAIRE

    Mitchell, C J

    1992-01-01

    Processing of heavy mineral sands involves many techniques including gravity, magnetic and electrostatic separation. As part of a laboratory programme to develop effective mineral processing techniques, two mineral sands from Malawi and Malaysia were processed using the standard techniques, with emphasis placed on the Carpco electrostatic separator. These sands were initially characterised mineralogically by scanning electron microscopy (SEM), electron microprobe analysis (EPMA...

  15. Adsorption of RNA on mineral surfaces and mineral precipitates

    Science.gov (United States)

    Biondi, Elisa; Furukawa, Yoshihiro; Kawai, Jun

    2017-01-01

    The prebiotic significance of laboratory experiments that study the interactions between oligomeric RNA and mineral species is difficult to know. Natural exemplars of specific minerals can differ widely depending on their provenance. While laboratory-generated samples of synthetic minerals can have controlled compositions, they are often viewed as "unnatural". Here, we show how trends in the interaction of RNA with natural mineral specimens, synthetic mineral specimens, and co-precipitated pairs of synthetic minerals, can make a persuasive case that the observed interactions reflect the composition of the minerals themselves, rather than their being simply examples of large molecules associating nonspecifically with large surfaces. Using this approach, we have discovered Periodic Table trends in the binding of oligomeric RNA to alkaline earth carbonate minerals and alkaline earth sulfate minerals, where those trends are the same when measured in natural and synthetic minerals. They are also validated by comparison of co-precipitated synthetic minerals. We also show differential binding of RNA to polymorphic forms of calcium carbonate, and the stabilization of bound RNA on aragonite. These have relevance to the prebiotic stabilization of RNA, where such carbonate minerals are expected to have been abundant, as they appear to be today on Mars.

  16. Mineralization and Geochemical Exploration in Volcanic- Plotonic Area of Halakabad Village (Sabzevar, Regarding to Cu-Porphyry Deposits

    Directory of Open Access Journals (Sweden)

    Panahi Shahri, M.

    2010-05-01

    Full Text Available The investigated area is located 30 Km south of Sabzevar in Halakabad village. Geological phenomenons in area follow a trend of NW-SE. Mineralization consists of metallic and non-metallic (kaolin mineralization. Disseminated and veinlet mineralization is generally associated with argillic alteration type. Pyrite is the most widespread type of sulfide mineralization in Halakabad occurrences. It usually displays a euhedral habit and have occurred at least in two generations. Calcopyrite is common in veinlets although in minor amounts. Secondary sulfuric acid weathering of the ore has generated huge surficial amounts of oxide and sulfate minerals which of hematite and jarosite are the most abundant. Geochemical exploration was conducted over both drainage geochemistry and rock geochemistry. Results show that some of the stream sediments have higher concentrations of Copper and Zinc than normal. This anomalies maches with monzonite outcrops in area. The chip rock geochemical data shows highest values in west of halakabad mine for Cu and Zn respectively 500 and 900 ppm. These data represents that all samples collected from surficial areas of east of area contain lower concentrations of Copper while sulfide mineralization is more than the other parts. Presence of favorable alteration system in region, presence of monzonite subvolcanic intrusions and regional geological criteria indicates a possible Cu-Au porphyry system in Halakabad area.

  17. Oxygen Extraction from Minerals

    Science.gov (United States)

    Muscatello, Tony

    2017-01-01

    Oxygen, whether used as part of rocket bipropellant or for astronaut life support, is a key consumable for space exploration and commercialization. In Situ Resource Utilization (ISRU) has been proposed many times as a method for making space exploration more cost effective and sustainable. On planetary and asteroid surfaces the presence of minerals in the regolith that contain oxygen is very common, making them a potential oxygen resource. The majority of research and development for oxygen extraction from minerals has been for lunar regolith although this work would generally be applicable to regolith at other locations in space. This presentation will briefly survey the major methods investigated for oxygen extraction from regolith with a focus on the current status of those methods and possible future development pathways. The major oxygen production methods are (1) extraction from lunar ilmenite (FeTiO3) with either hydrogen or carbon monoxide, (2) carbothermal reduction of iron oxides and silicates with methane, and (3) molten regolith electrolysis (MRE) of silicates. Methods (1) and (2) have also been investigated in a two-step process using CO reduction and carbon deposition followed by carbothermal reduction. All three processes have byproducts that could also be used as resources. Hydrogen or carbon monoxide reduction produce iron metal in small amounts that could potentially be used as construction material. Carbothermal reduction also makes iron metal along with silicon metal and a glass with possible applications. MRE produces iron, silicon, aluminum, titanium, and glass, with higher silicon yields than carbothermal reduction. On Mars and possibly on some moons and asteroids, water is present in the form of mineral hydrates, hydroxyl (-OH) groups on minerals, andor water adsorbed on mineral surfaces. Heating of the minerals can liberate the water which can be electrolyzed to provide a source of oxygen as well. The chemistry of these processes, some key

  18. Industrial pioneers

    NARCIS (Netherlands)

    Wassink, J.

    2014-01-01

    With their knowledge of metallurgy, mechanics and thermodynamics, mechanical engineers had to give shape to the industrial revolution in the Netherlands 150 years ago. This revolution only slowly gathered momentum, however, especially in comparison with England.

  19. Industrial Chemistry.

    Science.gov (United States)

    Gumprecht, Donald L.; Thrasher, Joseph S.

    1990-01-01

    Described is a course designed to better prepare students for employment in chemical industries. A course schedule for this interim course and a list of sources of speakers and speaker credentials is provided. (CW)

  20. Chemical industrial production and applied chemistry of metals and nonmetals in educational program of chemistry in elementary school

    OpenAIRE

    Cvjetićanin Stanko M.; Segedinac Mirjana; Letić Ljubinka B.

    2009-01-01

    In this paper a part of the model of the curriculum, which should improve chemical education in primary schools is presented. The implemented module refers to metals and non-metals in the fields of applied chemistry and chemical industry. Contents of the curriculum from 1974 to 2004 are considered. The quantity and quality of the pupils' knowledge are analyzed. The research showed that the pupils' knowledge is low. The module is implemented for the sake of overcoming the observed drawbacks in...

  1. Marine minerals: The Indian perspective

    Digital Repository Service at National Institute of Oceanography (India)

    Gujar, A.R.; Nath, B.N.; Banerjee, R.

    The sea floor of the continental margins of India is covered by a wide variety of terrigenous, biogenous, and chemogenous mineral deposits. Terrigenous heavy mineral placers containing ilmenite, magnetite, monazite, zircon, and rutile are reported...

  2. Unmixing of spectrally similar minerals

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2009-01-01

    Full Text Available -bearing oxide/hydroxide/sulfate minerals in complex mixtures be obtained using hyperspectral data? Debba (CSIR) Unmixing of spectrally similar minerals MERAKA 2009 3 / 18 Method of spectral unmixing Old method: problem Linear Spectral Mixture Analysis (LSMA...

  3. Agricultural Minerals Operations - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer includes agricultural minerals operations in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  4. Construction Minerals Operations - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer includes construction minerals operations in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  5. Electronics Industry

    Science.gov (United States)

    2006-01-01

    companies to begin listing stock options as expenses on financial reports (Chappell, 2005). The industry had used stock options extensively to help... stock options (Chappell, 2005). Industry representatives interviewed by the group argued against the requirement since they predict U.S. companies...may be less inclined now to offer stock options , and subsequently talent may be lost to aggressive foreign competition (Anonymous interviews, 2006

  6. Discussion on Nontraditional Mineral Resources

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper, the authors introduce the concept of nontraditional mineral resources, and pro pose the major system of nontraditional mineral resources, including nontraditional resources, research methods, mining and mineral economics. Then the authors conclude that the research on nontraditional mineral resources is not only significant to satisfication the human needs in the 21st century, but also important to the development of the present geological theory.

  7. Rock and mineral magnetism

    CERN Document Server

    O’Reilly, W

    1984-01-01

    The past two decades have witnessed a revolution in the earth sciences. The quantitative, instrument-based measurements and physical models of. geophysics, together with advances in technology, have radically transformed the way in which the Earth, and especially its crust, is described. The study of the magnetism of the rocks of the Earth's crust has played a major part in this transformation. Rocks, or more specifically their constituent magnetic minerals, can be regarded as a measuring instrument provided by nature, which can be employed in the service of the earth sciences. Thus magnetic minerals are a recording magnetometer; a goniometer or protractor, recording the directions of flows, fields and forces; a clock; a recording thermometer; a position recorder; astrain gauge; an instrument for geo­ logical surveying; a tracer in climatology and hydrology; a tool in petrology. No instrument is linear, or free from noise and systematic errors, and the performance of nature's instrument must be assessed and ...

  8. Iodine mineral waters

    Directory of Open Access Journals (Sweden)

    Iluta Alexandru

    2011-11-01

    Full Text Available Iodine mineral waters are found especially in sub-Carpathian region, also in regions with Salif deposits. Waters are currently used iodine in drinking cure for chaps and Basedow. Are also indicated in balneology. Iodine water containing at least 1 mg L, there is pure iodine is usually given the nature of other types of mineral waters further: sodium chlorinated water (Bazna (50-70 mg iodine / l, Baile Govora (50 - 70 mg / l, Bălţăteşti (4-5 mg / l, salted Monteoru (30 mg / l, mine water mixed alkaline chlorination, sulphate, which are indicated for crenoterapie (hypo or isotonic to the bathrooms Olăneşti or Călimăneşti-Căciulata.

  9. Coastal placer minerals

    Digital Repository Service at National Institute of Oceanography (India)

    Iyer, S.D.; Gujar, A.R.

    by mechanical concentration and natural gravity separation of mineral particles derived from weathered rocks. The formation of placers requires factors such as: climate, source rock, weathering, transport, deposition, concentration, high specific gravity... and transport of the rocks. For example, in cold and glaciated regions, there would be limited physical weathering and less concentration and more dispersion of the weathered material and placers would not FE AT U R E FE AT U R E A RT IC LE form...

  10. Mineral metabolism in cats

    OpenAIRE

    Pineda Martos, Carmen María

    2014-01-01

    The present Doctoral Thesis wa metabolism in the feline species. Through a series of studies, the relationship between calcium metabolism and the main hormones involved in it has been determined metabolism during the juvenile stage of growing cats effects linked to feeding calculolytic diets on feline mineral metabolism. The first part of the work was aimed the quantification of intact (I-PTH) and whole PTH) and to characterize the dynamics of PTH secretion, including ...

  11. Culture systems: mineral oil overlay.

    Science.gov (United States)

    Morbeck, Dean E; Leonard, Phoebe H

    2012-01-01

    Mineral oil overlay microdrop is commonly used during in vitro fertilization (IVF) procedures. Though mineral oil appears homogeneous, it is an undefined product that can vary in quality. Here, we describe the history, chemistry, processing, and optimal use of mineral oil for IVF and embryo culture.

  12. Polymer-mediated mesoscale mineralization

    Institute of Scientific and Technical Information of China (English)

    CHEN ShaoFeng; YU ShuHong

    2009-01-01

    Polymer-controlled mineralization in aqueous solution or in a mixed solvent media, as well as its com-bination with the interface of air-water can lead to the formation of minerals with unique structures and morphologies, which sheds light on the possibility to mimic the detailed structures of the natural min-erals.

  13. Definitions of Health Terms: Minerals

    Science.gov (United States)

    ... this page: https://medlineplus.gov/definitions/mineralsdefinitions.html Definitions of Health Terms : Minerals To use the sharing features on ... of the minerals that you need. Find more definitions on Fitness | General Health | Minerals | Nutrition | Vitamins Antioxidants Antioxidants are substances that ...

  14. Restoration and Reconstruction of the Industrialand Mineral Industry Ecosystem

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Large amount of toxic contanminants are being released to the environment around the global from rapid urbanization andindustrialization. Among such contaminants are industiral wastes and ore tailing that result from worldwide mining acticities. Inmining operations and ecological restoration projects increase public perception of mining companies. The effects of minieralindustry and ore tailing to environment were studied and the restoration measurements, such as soil and waste materials ecologicaltreament, water purification and recycling, vegetation ecological design, are proposed as successfully designs to achieve anoptimum recovery of the waste lands.

  15. (Industrial dermatoses among the Belthatow brown coal miners)

    Energy Technology Data Exchange (ETDEWEB)

    Ruszczak, Z.; Bienias, L.; Proszyncka-Kuczynska, W.

    1981-01-01

    443 subjects were examined, 235 applying to the physician due to the occurrence of skin dermatoses (group I) and 208 workers referred for periodic examinations (group II). In group I skin dermatoses were found in 100, i.e. 85%, of the subjects and in group II in 99 i.e. 48% of the subjects. In both groups the most frequent dermatosis was feet skin inflammation, especially interdigital intertrigo. Oil acne was diagnosed in 15, ordinary acne in 23, pityriasis versicolor in 19. erythrasma in 10, and eczema and contact dermatitis in 7 subjects of the first group and 3 subjects of the other group. 204 subjects with feet skin pathologies underwent mycologic examinations and 36 subjects--also bacteriologic examinations. The results of those studies indicate that in 23% of the subjects, feet interdigital intertrigo results from mycologic infections. Bacterial infections may contribute to etiopathogenesis. Imidazole compounds are useful for the treatment and prevention of interdigital intertrigo.

  16. Exposure of workers in a mineral processing industry in Brazil.

    Science.gov (United States)

    Julião, Lígia M Q C; Melo, Dunstana R; Sousa, Wanderson O; Santos, Maristela S; Fernandes, Paulo César; Godoy, Maria Luiza D P

    2007-01-01

    In Brazil there are many regions where the extraction mining and processing of ores containing elements of great economical importance as tin, niobium and tantalum. Some of these ores have uranium and thorium natural decay series associated. This study was carried out in a niobium mine, where is obtained concentrates of niobates-tantalates, cassiterite and zirconite. The aim of this study is the evaluation of the occupational exposure to uranium, thorium, niobium and tin through urine bioassay data. In order to have it, 105 urine samples were analysed: 17 samples of exposed workers collected after a working day, 49 samples of exposed workers collected before a working day and 39 samples of local non-exposed people, assigned as a control group. The samples were analysed by mass spectrometry. The obtained results showed that the average concentration of Nb, Sn and U in the exposed group is statistically higher than those found in the control group indicating an occupational exposure. For Th there were no statistically difference between the exposed and the control group.

  17. GYM系列亿丰磨在非金属矿物超微粉碎中的应用%Application of GYM Series Yifeng Mill in Micronizing of Non-metal Mineral

    Institute of Scientific and Technical Information of China (English)

    孙成林; 王清发; 连钦明

    2004-01-01

    干法生产超细粉是我国非金属粉体的重要加工工艺之一,传统的粉磨设备难以达到大量生产d97=2~10μm超细粉的要求,且生产效率低.阐述了采用多磨轮、多磨道原理设计的GYM-83型亿丰磨在生产粒径为11μm的碳酸钙干粉时,其累积分布达98%,粒径为2 μm的占总质量44.96%,产量达到了1 250 kg/h,且基建投资少,性价比好.

  18. Inquire Into Tariff Analysis and Trade Problems of Non-metallic Mineral Products in China%我国非金属矿产品关税分析及其贸易问题探讨

    Institute of Scientific and Technical Information of China (English)

    陈甲斌; 殷俐娟

    2004-01-01

    我国非金属矿产品的进口关税历年总体上是下调的,然而在贸易上分析它的进出口价格却发现存在着很多隐含的贸易问题.为了解决这些问题和促进我国非金属矿产业的健康发展,本文就我国非金属矿产品贸易及其他相关方面的问题提出了一些建议.

  19. Mitigating Greenhouse Gas Emissions with Minerals

    Science.gov (United States)

    Wilson, S. A.; Dipple, G. M.; Raudsepp, M.; Anderson, R. G.

    2006-05-01

    Carbon sequestration or disposal has been recognized as a necessary first step toward the stabilization of atmospheric carbon dioxide (CO2) levels. Of the proposed methodologies for carbon disposal, binding CO2 in carbonate minerals represents the most environmentally benign and geologically stable means of reducing atmospheric carbon levels. By some estimates, as much as 87% of the Earth's carbon is bound in carbonate minerals. Carbon sequestration seeks to accelerate the natural weathering processes responsible for carbon fixation in minerals. Atmospheric CO2 is being fixed in carbonate efflorescences forming in tailings from both inactive and active chrysotile mines. Our data suggest that microbial activity in tailings may mediate the precipitation of more thermodynamically stable hydrated magnesium carbonate phases. Carbonation of kaolinite-serpentine group minerals in ultramafic mine tailings represents a potential implementation of the carbon sequestration process. We have developed a protocol for verifying and quantifying carbon sequestration in mine tailings. Quantitative phase analysis with the Rietveld method and X-ray powder-diffraction data is used to determine the modal abundance of hydrated magnesium carbonates in mine tailings. Stable and radiogenic isotopes are used to fingerprint an atmospheric source for CO2 and to detect contamination by bedrock carbonate. Global implementation of carbon sequestration in ultramafic mine tailings has the potential to draw CO2 directly from the atmosphere at a rate of 10(8) tonnes of carbon per year. In situ sequestration in mine tailings bypasses the need to transport large quantities of tailings to industrial point sources and can be accomplished without high-pressure, high-temperature reactors. Mine tailings may, therefore, represent the optimal environment in which to pursue carbon sequestration in minerals.

  20. Prospecting and exploration of deposits of ores, useful minerals and rocks (Vademecum 1)

    Energy Technology Data Exchange (ETDEWEB)

    Prokop, F.W.; Streck, W.; Sagheer, M.; Tschoepke, R.W.; Walther, H.W.; Pietzner, H.; Stadler, G.; Vogler, H.; Werner, H.

    1981-01-01

    Geologists and practical men are given instructions for prospecting and exploring deposits of ores, industrial minerals and useful rocks. The improvements and innovations of the prospecting and exploration technologies as well as the production and processing methods are considered.

  1. Mechanical Properties of Man-Made Mineral glass fibres

    DEFF Research Database (Denmark)

    Lund, Majbritt Deichgræber; Yue, Yuanzheng

    In nature basaltic volcanic glass fibres are know from Hawaii as Pele's hair, formed by droplets of lava thrown into the air during volcanic eruption. The concept of glass fibre formation by an air stream dragging fibres from drops of melt is copied in industry to form basaltic glass wool fibres......; man-made mineral glass fibres. The basaltic melt is prevented from crystallizing due to the high cooling rate, forming the mineral glass wool fibres. Basaltic mineral wool fibres are of high interest in industry due to their good chemical durability and excellent heat and sound insulation properties...... of the information gained from the mechanical tests, fracture characteristics of individual glass fibres are imaged by scanning electron microscopy. The fracture surfaces showed to fall in three groups; 1) surfaces including fracture mirror, mist and hackle, 2) bend fracture surfaces and 3) surfaces including pores...

  2. RELATIVE TRACE MINERAL BIOAVAILABILITY

    Directory of Open Access Journals (Sweden)

    Rchard D. Miles

    2006-10-01

    Full Text Available Para determinar a eficiência de utilização de elementos minerais dietéticos, deve-se conhecer a biodisponibilidade relativa de cada elemento de um determinado ingrediente ou de uma ração completa. Análises químicas da dieta ou de um determinado ingrediente não indicam a efetividade biológica de um nutriente. Existem muitos fatores que influenciam a biodisponibilidade dos minerais, especialmente dos minerais-traço, tais como: nível de consumo do mineral, forma química, digestibilidade da dieta, tamanho da partícula, interações com outros minerais e nutrientes, agentes quelantes, inibidores, estado fisiológico do animal, qualidade da água, condições de processamento ao qual ingredientes individuais ou uma dieta completa foram expostos e, é óbvio, a idade e a espécie animal. Quando um mineral-traço é ingerido, sua biodisponibilidade é influenciada por propriedades específicas do mineral da maneira como está incluído na dieta. Por exemplo, sua valência e forma molecular (orgânica versus inorgânica são importantes. Por causa dessas propriedades específicas, o mineral pode formar complexos com outros componentes no intestino, o que pode dificultar ou facilitar a absorção pela mucosa, o transporte ou o metabolismo do mineral no organismo. É bem conhecido que certos minerais em sua forma inorgânica competem com outros minerais por sítios de ligação e por absorção no intestino. O conhecimento sobre a biodisponibilidade dos minerais-traço nos ingredientes e fontes suplementares é importante para a formulação econômica de uma ração para garantir ótimo desempenho animal. A biodisponibilidade deve ser entendida como um valor “estimado” que reflete a absorção e a utilização do mineral sobre condições de um experimento específico e não de uma propriedade inerente e específica de um ingrediente ou suplemento de ração. Com a tecnologia disponível, a determinação da biodisponibilidade dentro de

  3. Oxidative Mineralization and Characterization of Polyvinyl Alcohol Solutions for Wastewater Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Oji, L.N.

    1999-08-31

    The principal objectives of this study are to identify an appropriate polyvinyl alcohol (PVA) oxidative mineralization technique, perform compatibility and evaporation fate tests for neat and mineralized PVA, and determine potential for PVA chemical interferences which may affect ion exchange utilization for radioactive wastewater processing in the nuclear industry.

  4. Industrial diamond

    Science.gov (United States)

    Olson, D.W.

    2013-01-01

    Estimated 2012 world production of natural and synthetic industrial diamond was about 4.45 billion carats. During 2012, natural industrial diamonds were produced in at least 20 countries, and synthetic industrial diamond was produced in at least 12 countries. About 99 percent of the combined natural and synthetic global output was produced in Belarus, China, Ireland, Japan, Russia, South Africa and the United States. During 2012, China was the world’s leading producer of synthetic industrial diamond followed by the United States and Russia. In 2012, the two U.S. synthetic producers, one in Pennsylvania and the other in Ohio, had an estimated output of 103 million carats, valued at about $70.6 million. This was an estimated 43.7 million carats of synthetic diamond bort, grit, and dust and powder with a value of $14.5 million combined with an estimated 59.7 million carats of synthetic diamond stone with a value of $56.1 million. Also in 2012, nine U.S. firms manufactured polycrystalline diamond (PCD) from synthetic diamond grit and powder. The United States government does not collect or maintain data for either domestic PCD producers or domestic chemical vapor deposition (CVD) diamond producers for quantity or value of annual production. Current trade and consumption quantity data are not available for PCD or for CVD diamond. For these reasons, PCD and CVD diamond are not included in the industrial diamond quantitative data reported here.

  5. Low back pain and lumbar angles in Turkish coal miners

    Energy Technology Data Exchange (ETDEWEB)

    Sarikaya, S.; Ozdolap, S.; Gumustas, S.; Koc, U. [Zonguldak Karaelmas University, Zonguldak (Turkey). Faculty of Medicine

    2007-02-15

    This study was designed to assess the incidence of low back pain among Turkish coal miners and to investigate the relationship between angles of the lumbar spine and low back pain in coal miners. Fifty underground workers (Group I) and 38 age-matched surface workers (Group II) were included in the study. All the subjects were asked about low back pain in the past 5 years. The prevalence of low back pain was higher in Group I than in Group II (78.0%, 32.4%, respectively, P {lt} 0.001). The results of the study showed that low back pain occurred in 78.0% of Turkish coal miners. Although the nature of the occupation may have influenced coal miners' lumbar spinal curvature, lumbar angles are not a determinant for low back pain in this population. Further extensive studies involving ergonomic measurements are needed to validate our results for Turkish coal mining industry.

  6. Uraniferous minerals - uraninite and derived or related uraniferous minerals; Mineraux uraniferes - uraninite et mineraux uraniferes derives ou associes

    Energy Technology Data Exchange (ETDEWEB)

    Lebrun, P.; Cesbron, F.; Le Cleac' h, J.M.; Lebocey, J.

    2009-07-01

    This special issue of 'Mineraux et Fossiles' journal (no.28) proposes a real trip in the uranium world with the exception of the industrial and military applications. The book comprises 6 chapters fully illustrated with figures and photos of minerals dealing with: 1 - a brief history of uranium (including radioactivity); 2 - crystallo-chemistry of some uranium minerals; 3 - uranium minerals with a presentation of the most important species ('remarkable' species); 4 - classification of uranium deposits; 5 - most famous uranium deposits which played an important role in the development of nuclear industry (Jachymov deposit in Czech Republic, Shinkolobwe in Katanga, Oklo in Gabon etc); 6 - uranium usages, in particular in glass and ceramics coloring and in geochronology. (J.S.)

  7. Mineral fibre problems: a management view.

    Science.gov (United States)

    Hardie, H D

    1980-01-01

    Fibre is a form of matter that imparts exclusive properties to end-products; however, most fibres have been associated with health problems. Although management has a responsibility to ensure the safety of products and processes, data on which to base risk-equation decisions are often inadequate. The limitations of current dust measurement technology suggest that apparently precise numerical exposure data are as subjective as use of the terms 'heavy', 'moderate' or 'light'. Control of any useful but hazardous material is preferable to the ultimate sanction of prohibition. The man-made mineral fibre industry and national and international regulatory agencies should learn from the asbestos industry. It is suggested that a process of consultation, rather than one of confrontation, is more likely to produce widely acceptable solutions in each generation.

  8. Water, mineral waters and health.

    Science.gov (United States)

    Petraccia, Luisa; Liberati, Giovanna; Masciullo, Stefano Giuseppe; Grassi, Marcello; Fraioli, Antonio

    2006-06-01

    The authors focus on water resources and the use of mineral waters in human nutrition, especially in the different stages of life, in physical activity and in the presence of some morbid conditions. Mineral water is characterized by its purity at source, its content in minerals, trace elements and other constituents, its conservation and its healing properties recognized by the Ministry of Health after clinical and pharmacological trials. Based on total salt content in grams after evaporation of 1l mineral water dried at 180 degrees C (dry residues), mineral waters can be classified as: waters with a very low mineral content, waters low in mineral content, waters with a medium mineral content, and strongly mineralized waters. Based on ion composition mineral waters can be classified as: bicarbonate waters, sulfate waters, sodium chloride or saltwater, sulfuric waters. Based on biological activity mineral waters can be classified as: diuretic waters, cathartic waters, waters with antiphlogistic properties. Instructions for use, doses, and current regulations are included.

  9. Non-Metallic Biomaterials for Tooth Repair and Replacement. By Pekka Vallittu, Woodhead Publishing, 2013; 406 pages. Price £145.00/US$245.00/€175.00 ISBN 978-0-85709-244-1

    Directory of Open Access Journals (Sweden)

    Shu-Kun Lin

    2013-01-01

    Full Text Available 1. Discusses the properties of enamel and dentin and their role in adhesive dental restoration;2. Chapters also examine the wear properties of dental ceramics, glasses and bioactive glass ceramics for tooth repair and replacement;3. Dental composites and antibacterial restorative materials are also considered;4. Provides a concise overview of non-metallic biomaterials for dental clinicians, materials scientists and academic researchers alike.As the demand for healthy, attractive teeth increases, the methods and materials employed in restorative dentistry have become progressively more advanced. Non-metallic biomaterials for tooth repair and replacement focuses on the use of biomaterials for a range of applications in tooth repair and, in particular, dental restoration.

  10. Hospitality Industry

    Directory of Open Access Journals (Sweden)

    Marian Ionel

    2017-03-01

    Full Text Available Development of accommodation, as basic services offered to tourists, led to the creation of a genuine hospitality industry. Currently, the hospitality industry is no longer just the accommodation service itself but also requires an atmosphere that ensures leisure tourists in the hotel. Thus, hospitable unit manager offers its service in addition to accommodation and catering services, leisure services, treatment services, business services required.. The existence of factors such as revenue growth, increasing leisure time, the development of transport services, the emergence of new tourist attractions have caused increasing international flows of tourists, with consequent development of units hospitable, and therefore a strong hospitality industry. In Romania, after 1990, the tourism sector experienced a true expansion, both through the development of the hotel sector, but also by developing rural hospitality units.

  11. Fiabilidad industrial

    OpenAIRE

    Griful Ponsati, Eulàlia

    2001-01-01

    El presente libro ha sido escrito y editado para los estudios de segundo ciclo de Ingeniería de Organización Industrial que se imparten en la ETSEIT de la UPC. La materia de fiabilidad que se imparte en este texto es una introducción a las técnicas estadísticas para resolver cuestiones de fiabilidad industrial. Se estudian distintos modelos probabilísticos del tiempo de vida y se presentan distintas formas de recabar información y de estimar, en cada caso, la fiabilidad de los componentes y s...

  12. Industrial Networks

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    the focus of operations management from managing the own organization to continuously developing and managing a network of external and internal resources forming a production system. This perspective may be called managing an “extraprise” rather than an “enterprise.” It should be noted that “an industrial...... network” should not be seen as an organizational form but as a perspective that can be used to enrich one's understanding of organizations. The industrial network perspective has three basic building blocks: actors, resources, and activities. The three building blocks and their relations constitute...

  13. Mineral mining installation

    Energy Technology Data Exchange (ETDEWEB)

    Plevak, L.; Weirich, W.

    1982-04-20

    A longwall mineral mining installation has a longwall conveyor and a plurality of roof support units positioned side-by-side at the goaf side of the conveyor. The hydraulic appliances of the roof support units, such as their hydraulic props, hydraulic advance rams and hydraulic control valves, are supplied with pressurized hydraulic fluid from hydraulic supply lines which run along the goaf side of the conveyor. A plurality of flat, platelike intermediate members are provided at the goaf side of the conveyor. These intermediate members are formed with internal ducts for feeding the hydraulic fluid from the supply lines to the hydraulic appliances of the roof support units.

  14. Reinforcing the mineral layer

    Energy Technology Data Exchange (ETDEWEB)

    Pishchulin, V.V.; Kuntsevich, V.I.; Seryy, A.M.; Shirokov, A.P.

    1980-05-15

    A way of reinforcing the mineral layer includes drilling holes and putting in anchors that are longer than the width of the layer strip being extracted. It also includes shortening the anchors as the strip is mined and reinforcing the remaining part of the anchor in the mouth of the hole. To increase the productivity and safety of the work, the anchors are shortened by cutting them as the strip is mined and are reinforced through wedging. The device for doing this has auxilliary lengthwise grooves in the shaft located along its length at an interval equal to the width of the band being extracted.

  15. Fermentation Industry.

    Science.gov (United States)

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  16. Fermentation Industry.

    Science.gov (United States)

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  17. Shifting Industries

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Coastal city Beihai aspires to revive its economy by developing its electronic information industry Against a clear sky,the blue sea hums along a shining beach,with villas in the distance.This beautiful scene is in Beihai,in south China’s Guangxi Zhuang Autonomous Region.

  18. Fluorometric determination of zirconium in minerals

    Science.gov (United States)

    Alford, W.C.; Shapiro, L.; White, C.E.

    1951-01-01

    The increasing use of zirconium in alloys and in the ceramics industry has created renewed interest in methods for its determination. It is a common constituent of many minerals, but is usually present in very small amounts. Published methods tend to be tedious, time-consuming, and uncertain as to accuracy. A new fluorometric procedure, which overcomes these objections to a large extent, is based on the blue fluorescence given by zirconium and flavonol in sulfuric acid solution. Hafnium is the only element that interferes. The sample is fused with borax glass and sodium carbonate and extracted with water. The residue is dissolved in sulfuric acid, made alkaline with sodium hydroxide to separate aluminum, and filtered. The precipitate is dissolved in sulfuric acid and electrolysed in a Melaven cell to remove iron. Flavonol is then added and the fluorescence intensity is measured with a photo-fluorometer. Analysis of seven standard mineral samples shows excellent results. The method is especially useful for minerals containing less than 0.25% zirconium oxide.

  19. Mineral composition of organically grown tomato

    Science.gov (United States)

    Ghambashidze, Giorgi

    2014-05-01

    In recent years, consumer concerns on environmental and health issues related to food products have increased and, as a result, the demand for organically grown production has grown. Results indicate that consumers concerned about healthy diet and environmental degradation are the most likely to buy organic food, and are willing to pay a high premium. Therefore, it is important to ensure the quality of the produce, especially for highly consumed products. The tomato (Lycopersicon esculentum) is one of the most widely consumed fresh vegetables in the world. It is also widely used by the food industries as a raw material for the production of derived products such as purees or ketchup. Consequently, many investigations have addressed the impact of plant nutrition on the quality of tomato fruit. The concentrations of minerals (P, Na, K, Ca and Mg) and trace elements (Cu, Zn and Mn) were determined in tomatoes grown organically in East Georgia, Marneuli District. The contents of minerals and Mn seem to be in the range as shown in literature. Cu and Zn were found in considerably high amounts in comparison to maximum permissible values established in Georgia. Some correlations were observed between the minerals and trace elements studied. K and Mg were strongly correlated with Cu and Zn. Statistically significant difference have shown also P, K and Mg based between period of sampling.

  20. The miners' safety lamp

    Energy Technology Data Exchange (ETDEWEB)

    Habashi, Fathi

    2010-11-15

    As the Industrial Revolution began in the eighteenth century in the United Kingdom, a number of innovations were introduced including the miner's safety lamp. The miner's lamp was invented in 1816 by Sir Humphrey Davy (1778-1829) and independently by George Stephenson (1781-1848). The use of the newly invented safety lamp was introduced during the shift from a wood-burning to a coal-burning economy. Coal mining was dangerous, due to the presence of methane in many coal seams. In the past miners going underground with an oil lamp or a torch ran the risk of igniting the methane and causing an explosion. The new lamp consisted of a flame surrounded by a cylinder of metallic gauze, which allowed air to penetrate through and feed the flame. The heat of the flame was dissipated by the metal and as such, prevented explosive gases outside the lamp from igniting. The lamp was immortalized by memorial statues, stamps and some monuments. In 1910 a battery-operated electric lamp was introduced replacing the Stephenson's lamp.

  1. Practical applications of trace minerals for dairy cattle.

    Science.gov (United States)

    Overton, T R; Yasui, T

    2014-02-01

    Trace minerals have critical roles in the key interrelated systems of immune function, oxidative metabolism, and energy metabolism in ruminants. To date, the primary trace elements of interest in diets for dairy cattle have included Zn, Cu, Mn, and Se although data also support potentially important roles of Cr, Co, and Fe in diets. Trace minerals such as Zn, Cu, Mn, and Se are essential with classically defined roles as components of key antioxidant enzymes and proteins. Available evidence indicates that these trace minerals can modulate aspects of oxidative metabolism and immune function in dairy cattle, particularly during the transition period and early lactation. Chromium has been shown to influence both immune function and energy metabolism of cattle; dairy cows fed Cr during the transition period and early lactation have evidence of improved immune function, increased milk production, and decreased cytological endometritis. Factors that complicate trace mineral nutrition at the farm level include the existence of a large number of antagonisms affecting bioavailability of individual trace minerals and uncertainty in terms of requirements under all physiological and management conditions; therefore, determining the optimum level and source of trace minerals under each specific situation continues to be a challenge. Typical factorial approaches to determine requirements for dairy cattle do not account for nuances in biological function observed with supplementation with various forms and amounts of trace minerals. Trace mineral nutrition modulates production, health, and reproduction in cattle although both formal meta-analysis and informal survey of the literature reveal substantial heterogeneity of response in these outcome variables. The industry has largely moved away from oxide-based programs toward sulfate-based programs; however, some evidence favors shifting supplementation strategies further toward more bioavailable forms of inorganic and organic trace

  2. Spectroscopic characterization of manganese minerals

    Science.gov (United States)

    Lakshmi Reddy, S.; Padma Suvarna, K.; Udayabhaska Reddy, G.; Endo, Tamio; Frost, R. L.

    2014-01-01

    Manganese minerals ardenite, alleghanyite and leucopoenicite originated from Madhya Pradesh, India, Nagano prefecture Japan, Sussex Country and Parker Shaft Franklin, Sussex Country, New Jersey respectively are used in the present work. In these minerals manganese is the major constituent and iron if present is in traces only. An EPR study of on all of the above samples confirms the presence of Mn(II) with g around 2.0. Optical absorption spectrum of the mineral alleghanyite indicates that Mn(II) is present in two different octahedral sites and in leucophoenicite Mn(II) is also in octahedral geometry. Ardenite mineral gives only a few Mn(II) bands. NIR results of the minerals ardenite, leucophoenicite and alleghanyite are due to hydroxyl and silicate anions which confirming the formulae of the minerals.

  3. Spectroscopic characterization of manganese minerals.

    Science.gov (United States)

    Lakshmi Reddy, S; Padma Suvarna, K; Udayabhaska Reddy, G; Endo, Tamio; Frost, R L

    2014-01-03

    Manganese minerals ardenite, alleghanyite and leucopoenicite originated from Madhya Pradesh, India, Nagano prefecture Japan, Sussex Country and Parker Shaft Franklin, Sussex Country, New Jersey respectively are used in the present work. In these minerals manganese is the major constituent and iron if present is in traces only. An EPR study of on all of the above samples confirms the presence of Mn(II) with g around 2.0. Optical absorption spectrum of the mineral alleghanyite indicates that Mn(II) is present in two different octahedral sites and in leucophoenicite Mn(II) is also in octahedral geometry. Ardenite mineral gives only a few Mn(II) bands. NIR results of the minerals ardenite, leucophoenicite and alleghanyite are due to hydroxyl and silicate anions which confirming the formulae of the minerals. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. Iowa State Mining and Mineral Resources Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    This final report describes the activities of the Iowa State Mining and Mineral Resources Research Institute (ISMMRRI) at Iowa State University for the period July 1, 1989, to June 30, 1990. Activities include research in mining- and mineral-related areas, education and training of scientists and engineers in these fields, administration of the Institute, and cooperative interactions with industry, government agencies, and other research centers. During this period, ISMMRRI has supported research efforts to: (1) Investigate methods of leaching zinc from sphalerite-containing ores. (2) Study the geochemistry and geology of an Archean gold deposit and of a gold-telluride deposit. (3) Enchance how-quality aggregates for use in construction. (4) Pre-clean coal by triboelectric charging in a fluidized-bed. (5) Characterize the crystal/grain alignment during processing of yttrium-barium-copper-perovskite (1-2-3) superconductors. (5) Study the fluid inclusion properties of a fluorite district. (6) Study the impacts of surface mining on community planning. (7) Assess the hydrophobicity of coal and pyrite for beneficiation. (8) Investigate the use of photoacoustic absorption spectroscopy for monitoring unburnt carbon in the exhaust gas from coal-fired boilers. The education and training program continued within the interdepartmental graduate minor in mineral resources includes courses in such areas as mining methods, mineral processing, industrial minerals, extractive metallurgy, coal science and technology, and reclamation of mined land. In addition, ISMMRRI hosted the 3rd International Conference on Processing and Utilization of High-Sulfur Coals in Ames, Iowa. The Institute continues to interact with industry in order to foster increased cooperation between academia and the mining and mineral community.

  5. An overview of industrial employees' exposure to noise in sundry processing and manufacturing industries in Ilorin metropolis, Nigeria.

    Science.gov (United States)

    Olayinka, Oyedepo S; Abdullahi, Saadu A

    2009-04-01

    In this work, an overview of industrial employees' noise exposure level in five selected processing and manufacturing industries in Ilorin are evaluated and compared. Emphasis is given to noise emitted by individual industrial machinery from the selected industries. Event L(Aeq) and LN cycle were studied to identify the noisy machines and to generate baseline data. Findings show that, hammer mill machine from mineral crushing mills produced the highest average noise (98.4 dB(A), electric generator1 (95.6 dB(A) from soft drink bottling industry, electric generator (97.7 dB(A)) from beer brewing and bottling industry, vacuum pump (93.1 dB(A)) from tobacco making industry and electric generator 2 (94.1 dB(A) from mattress making industry. The highest and lowest average noise exposure levels are recorded in mineral crushing mills (93.16 dB(A)) and mattress making industry (84.69 dB(A)) respectively. The study shows that at 95% confidence level, there is significant difference (pbeer brewing and bottling industry (42.9%), tobacco making industry (71.4%), mattress making industry (11.1%) and minerals crushing mills (87.5%). In the past 20 years, the noise levels in soft drink bottling industry reduced by 0.58 dB(A) and that of beer brewing and bottling industry reduced by 9.66 dB(A). But that of mattress making industry increased by 2.69 dB(A). On the average, the noise level in these industries has reduced by 2.52 dB(A). The results of this study show that the noise control measures put in place have significant impact on the noise exposure level in the industries surveyed.

  6. Metal minerals scarcity. A call for managed austerity and the elements of hope

    Energy Technology Data Exchange (ETDEWEB)

    Diederen, A.M.

    2009-03-15

    If we keep following the ruling paradigm of sustained global economic growth, we will soon run out of cheap and plentiful metal minerals of most types. Their extraction rates will no longer follow demand. The looming metal minerals crisis is being caused primarily by the unfolding energy crisis. Conventional mitigation strategies including recycling and substitution are necessary but insufficient without a different way of managing our world's resources. The stakes are too high to gamble on timely and adequate future technological breakthroughs to solve our problems. The precautionary principle urges us to take immediate action to prevent or at least postpone future shortages. As soon as possible we should impose a co-ordinated policy of managed austerity, not only to address metal minerals shortages but other interrelated resource constraints (energy, water, food) as well. The framework of managed austerity enables a transition towards application (wherever possible) of the 'elements of hope': the most abundant metal (and non-metal) elements. In this way we can save the many critical metal elements for essential applications where complete substitution with the elements of hope is not viable. We call for a transition from growth in tangible possessions and instant, short-lived luxuries towards growth in consciousness, meaning and sense of purpose, connection with nature and reality and good stewardship for the sake of next generations.

  7. On resource survey of natural mineral drugs in eastern Jilin and their sustaining application

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    There are rich natural resources of natural mineral drugs in eastern Jilin Province. Systematic resource investigation can elevate fractional conversion of this area' s mineral drugs resources superiority. Research on natural mineral drugs of this area can upgrade the translation rate of resource superiority and accelerate the development of local medical industry, especially, it can provide scientific data for founding the strategic design of Chinese traditional medicine's trademark of Jilin Changbai Mountain. Since the resource of mineral drugs can not be regenerated, it must be exploited scientifically, utilized reasonably and protected effectively its sustaining application.

  8. Polycarboxylate derivative of -amino acid as growth modifier of sulphide minerals

    Indian Academy of Sciences (India)

    Harjyoti Thakuria; Gopal Das

    2011-02-01

    Construction of modified inorganic mineral with controlled mineralization analogues of those produced by nature is now of current interest for understanding the mechanism of the in vivo biomineralization processes, as well as looking for fresh industrial and technological applications. Low-molecular-weight chiral polycarboxylate ligands derived fromnaturally occurring -\\alpha-amino acids have been used asmodel systems to study the effect of small organic matrix on crystal growth modification. The sulphide minerals are characterized by PXRD, FT–IR and SEM. Furthermore, the optical properties of these minerals have been characterized by UV-Vis and photoluminescence (PL) spectra.

  9. Protein- mediated enamel mineralization

    Science.gov (United States)

    Moradian-Oldak, Janet

    2012-01-01

    Enamel is a hard nanocomposite bioceramic with significant resilience that protects the mammalian tooth from external physical and chemical damages. The remarkable mechanical properties of enamel are associated with its hierarchical structural organization and its thorough connection with underlying dentin. This dynamic mineralizing system offers scientists a wealth of information that allows the study of basic principals of organic matrix-mediated biomineralization and can potentially be utilized in the fields of material science and engineering for development and design of biomimetic materials. This chapter will provide a brief overview of enamel hierarchical structure and properties as well as the process and stages of amelogenesis. Particular emphasis is given to current knowledge of extracellular matrix protein and proteinases, and the structural chemistry of the matrix components and their putative functions. The chapter will conclude by discussing the potential of enamel for regrowth. PMID:22652761

  10. Mineralization by nanobacteria

    Science.gov (United States)

    Kajander, E. Olavi; Bjorklund, Michael; Ciftcioglu, Neva

    1998-07-01

    Nanobacteria are the smallest cell-walled bacteria, only recently discovered in human and cow blood and in commercial cell culture serum. In this study, we identified with energy-dispersive x-ray microanalysis and chemical analysis that all growth phases of nanobacteria produce biogenic apatite on their cell envelope. Fourier transform IR spectroscopy revealed the mineral as carbonate apatite. Previous models for stone formation have lead to a hypothesis that an elevated pH due to urease and/or alkaline phosphatase activity are important lithogenic factors. Our results indicate that carbonate apatite can be formed without these factors at pH 7.4 at physiological phosphate and calcium concentrations. Due to their specific macromolecules, nanobacteria can produce apatite very efficiency in media mimicking tissue fluids and glomerular filtrate and rapidly mineralizing most of available calcium and phosphate. This can be also monitored by (superscript 85)Sr incorporation and provides a unique model for in vitro studies on calcification. Recently, bacteria have been implicated in the formation of carbonate (hydroxy)fluorapatite in marine sediments. Apatite grains are found so commonly in sedimentary rocks that apatite is omitted in naming the stone. To prove that apatite and other minerals are formed by bacteria would implicate that the bacteria could be observed and their actions followed in stones. We have started to approach this in two ways. Firstly, by the use of sensitive methods for detecting specific bacterial components, like antigens, muramic acid and nucleic acids, that allow for detecting the presence of bacteria and, secondly, by follow-up of volatile bacterial metabolites observed by continuous monitoring with ion mobility spectrometry, IMCELL, working like an artificial, educatable smelling nose. The latter method might allow for remote real time detection of bacterial metabolism, a signature of life, in rocks via fractures of drillholes with or without

  11. ANALYSIS OF THE MINERAL-RAW MATERIAL SAFETY IN THE URAL FEDERATION DISTRICT

    Directory of Open Access Journals (Sweden)

    V.P. Pahomov

    2008-09-01

    Full Text Available The article analyzes the condition of the mineral-raw material base of firm minerals in the Ural Federation District. Attention is drawn to the fact that a significant portion of mineral resources goes to export, despite the fact that the local mineral-raw material base is largely declining and this poses a threat to the economic safety. It is stated that the entrance of the country into the world market gives it the possibility to use alternative sources of raw materials that can be found over-seas. Therefore, the providing of the mineral- raw material in the Ural industry seems quite optimistic for the time being. In order to provide the Ural industry with a long-term plan, a throughout preparation of a new raw material base is necessary, that will be located in the Ural North.

  12. Design of exploration and minerals-data-collection programs in developing areas

    Science.gov (United States)

    Attanasi, E.D.

    1981-01-01

    This paper considers the practical problem of applying economic analysis to designing minerals exploration and data collection strategies for developing countries. Formal decision rules for the design of government exploration and minerals-data-collection programs are derived by using a minerals-industry planning model that has been extended to include an exploration function. Rules derived are applicable to centrally planned minerals industries as well as market-oriented minerals sectors. They pertain to the spatial allocation of exploration effort and to the allocation of activities between government and private concerns for market-oriented economies. Programs characterized by uniform expenditures, uniform information coverage across regions, or uniform-density grid drilling progrmas are shown to be inferior to the strategy derived. Moreover, for market-oriented economies, the economically optimal mix in exploration activities between private and government data collection would require that only private firms assess local sites and that government agencies carry out regional surveys. ?? 1981.

  13. Analysis of exports of the brazilian mineral sector

    Directory of Open Access Journals (Sweden)

    Alison Geovani Schwingel Franck

    2017-01-01

    Full Text Available This study sought to analyze the pattern of specialization of exports of brazilian mineral sector, identifying the most dynamic productive sectors in the period between 1999 and 2015. For this purpose, the Import Coverage Ratio was calculated, as well as the Intra-industry Trade rate (IIT, and the Sector Concentration of Exports. Data were collected from the Foreign Trade Information Analysis System (Alice Web. The results indicated that Brazil has a few competitive mineral groups in its export basket, and that it is concentrated in a few sectors. It was found that the most competitive sectors were Niobium ore, iron, manganese, gold, aluminum, other semimanufaturado and copper.

  14. Hami’s Nonferrous Metal Industry Evolves Towards Clusters

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>In the development of black and nonferrous metals, Hami is characterized by a high starting point, high level, and high efficiency. Large enterprises and large groups are brought in to develop mineral resources. Focusing on large projects, Hami makes great efforts to extend the industry chain, turning resource advantages into industrial advantages.

  15. Towards zero waste production in the minerals and metals sector

    Science.gov (United States)

    Rankin, William J.

    The production of mineral and metal commodities results in large quantities of wastes (solid, liquid and gaseous) at each stage of value-adding — from mining to manufacturing. Waste production (both consumer and non-consumer) is a major contributor to environmental degradation. Approaches to waste management in the minerals industry are largely `after the event'. These have moved progressively from foul-and-flee to dilute-and-disperse to end end-of-pipe treatments. There is now a need to move to approaches which aim to reduce or eliminate waste production at source. Modern waste management strategies include the application of cleaner production principles, the use of wastes as raw materials, the reengineering of process flowsheets to minimise waste production, and use of industrial symbioses through industrial ecology to convert wastes into useful by-products. This paper examines how these can be adopted by the minerals industry, with some recent examples. The financial, technical, systemic and regulatory drivers and barriers are also examined.

  16. Upper limb tendinitis and entrapment neuropathy in coal miners.

    Science.gov (United States)

    Özdolap, Senay; Emre, Ufuk; Karamercan, Ayşe; Sarikaya, Selda; Köktürk, Fürüzan

    2013-05-01

    It is well-known that work-related upper limb musculoskeletal disorders, particularly tendinitis and nerve entrapment, remain a difficult and costly problem in industrialized countries. The aim of this study was to evaluate tendinitis and entrapment neuropathy of the upper limb of Turkish coal miners. Eighty coal miners and 43 age-matched clerical workers were included in the study. The evaluation procedures included collection of personal and clinical data, physical examination and bilateral electrodiagnostic testing. Subjects were examined to diagnose tendinitis and nerve entrapment of the upper limb. Bilateral median and ulnar nerves conduction tests were performed on all subjects. Data were collected between August 2011 and December 2011. There were 33 subjects with lateral epicondylitis, 10 with medial epicondylitis, and 22 with De Quervain's disease among the coal miners. There were seven subjects with lateral epicondylitis, eight with medial epicondylitis, and four with De Quervain's disease in the control group. The two groups significantly differed in the prevalences of lateral epicondylitis and De Quervain's disease (P = 0.024 and P =0.029, respectively). Sixteen subjects in the coal miners and 12 subjects in the controls had carpal tunnel syndrome (P = 0.66). Thirty-seven subjects in the coal miners had ulnar neuropathy of the elbow (UNE), while four subjects in the controls had UNE; this difference was statistically significant (P Quervain disease, and ulnar neuropathy are common work-related upper limb disorders among coal miners. Copyright © 2013 Wiley Periodicals, Inc.

  17. The application of GIS in identifying mineral resources in Libya

    Science.gov (United States)

    Rekhibi, Soliman; Wadi, Monira; Said, Ali

    2012-04-01

    In any country, natural mineral resources are considered the back-bone for the development of the industry and the country's economical growth. Exploration and mining for mineral ores and manufacturing and marketing these ores will add value to the country's national income. Geographic Information Systems (GIS) technology has an advantage over other information systems because it combines the conventional query operations with the ability to display and analyze spatial data from maps, satellite imagery, and aerial photography. Knowing the importance of mineral ores as a pilar of the economy this paper concentrates on mineral resources in Libya. Geographic information systems (GIS) was used for identifying mineral resources in Libya. Geodatabases were designed and all available information were stored in these geodatabases. The information was collected from scientific researchers, and geological and mining studies. The database also, included the Libyan international boundaries, the administrative boundaries and the oil and gas fields and pipelines, and such maps as geophysical and geological maps. Thus a comprehensive database was created containing all the information available concerning mineral resources in Libya.

  18. 77 FR 56273 - Conflict Minerals

    Science.gov (United States)

    2012-09-12

    ... opportunity to improve a company's existing risk management and supply chain management, stimulating... Minerals Already in the Supply Chain a. Proposed Rules b. Comments on the Proposed Rules c. Final Rule 6... Content and Supply Chain Due Diligence 1. Content of the Conflict Minerals Report a. Proposed Rules...

  19. Mineral Atlas of the World

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    In 1997 the mineral resources of Europe and neighbouring countries were presented as a printed map and a book of exhaustive information and references. This was the first published map inventory of mineral deposits from all parts of the formerly politically divided Europe (East and West), measured and evaluated according to identical geological and mining standards.

  20. A Mineral Processing Field Course

    Science.gov (United States)

    Carmody, Maurice

    2014-01-01

    This article describes a field course in Cornwall looking at mineral processing with the focus on the chemistry involved. The course was split into two parts. The first looked at tin mining based around Penzance. This involved visiting mines, hunting for mineral samples, carrying out a stream survey and visiting the Camborne School of Mines…

  1. Plant macro- and micronutrient minerals

    Science.gov (United States)

    All plants must obtain a number of inorganic mineral elements from their environment to ensure successful growth and development of both vegetative and reproductive tissues. A total of fourteen mineral nutrients are considered to be essential. Several other elements have been shown to have beneficia...

  2. 75 FR 80947 - Conflict Minerals

    Science.gov (United States)

    2010-12-23

    ... violence in the eastern Democratic Republic of the Congo, particularly sexual- and gender-based violence... conflict free,'' the facilities used to process the conflict minerals, the country of origin of the conflict minerals, and ``the efforts to determine the mine or location of origin with the greatest...

  3. Industrial chemistry engineering

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-01-15

    This book on industrial chemistry engineering is divided in two parts. The first part deals with industrial chemistry, inorganic industrial chemistry, organic industrial chemistry, analytical chemistry and practical questions. The last parts explain the chemical industry, a unit parts and thermodynamics in chemical industry and reference. It reveals the test subjects for the industrial chemistry engineering with a written examination and practical skill.

  4. Mineralogical characterization of clays used in the structural ceramic industry in west of S. Paulo State, Brazil Caracterização mineralógica de argilas usadas na indústria de cerâmica estrutural no oeste do estado de S. Paulo, Brasil

    Directory of Open Access Journals (Sweden)

    S. R. Teixeira

    2001-12-01

    Full Text Available Plasticity and the grain-size distribution of the raw material used to make structural bricks and roof tiles are very important to the production process. These two parameters and the mineral composition will define the quality and properties of the final product: color, mechanical resistance, water absorption, cracks, swell and shrink during drying and firing the ceramic pieces etc. In the Brazilian ceramic industry it is very common to mix together two or more different kinds of raw material to achieve the ceramic mass with the desired grain-size distribution. The objective of this work was to characterize the raw material collected at the floodplains of the Paraná and Paranapanema Rivers and the ceramic mass used by the ceramic industry in western São Paulo State, Brazil. Particle size distribution, organic matter and X-ray diffraction were used to study this material. The textural analysis indicates that the raw materials have the clay fraction ranging from 38.2% to 66.3%, the silt from 22.2% to 49.7% and the sand from 3.1% to 34.1%. The results indicate that all mixed raw materials have more clay in its composition than would be necessary. The organic matter ranges from 5 to 7%. All samples have kaolinite and many of them have smectites, HIV and mica. Gibbsite, iron and titanium oxides, and quartz are also identified. One of the samples (yellow is rich in goethite.A plasticidade e a granulometria da massa cerâmica são dois parâmetros importantes para o processo de produção de tijolos e telhas. Estes dois parâmetros e a composição mineralógica definirão a qualidade e propriedades (cor, resistência mecânica, absorção de água, trincas, mudanças nas dimensões durante a secagem e queima, etc. do produto final. Na indústria cerâmica brasileira é comum misturar dois ou mais tipos de "barro" para se obter a massa cerâmica com a granulometria e plasticidade desejada. O objetivo deste trabalho foi caracterizar a matéria prima

  5. India`s mineral policy in the wake of liberalisation and globalisation of economy

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhury, S.K. [Indian School of Mines, Dhanbad (India)

    1996-03-01

    The paper traces India`s mineral policy from independence in 1947 through to 1993 when the National Mineral Policy was announced and to 1994 when amendments were made to the 1948 Mineral Regulation and Development Act and the MCR Act. These cover all aspects of mining fuel, non-fuel and non-atomic minerals. During the last 2-3 years India has made a tremendous growth in export of alumina and aluminium, iron ore, steel and cement. Its weak points are metallurgical coal, crude oil and petroleum products, copper and nickel and fertiliser minerals. Some recent developments in the mineral industry are highlighted. BCCL are GCL are in dire need of funds for developing their coking coal mines. Coal India is anticipating one billion US dollar loan from the World Bank and other agencies for purchase of machinery. The Indian government is considering deregulation in price of coking and other higher grade coals.

  6. 30 CFR 57.5070 - Miner training.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Miner training. 57.5070 Section 57.5070 Mineral... Agents, and Diesel Particulate Matter Diesel Particulate Matter-Underground Only § 57.5070 Miner training. (a) Mine operators must provide annual training to all miners at a mine covered by this part who...

  7. Mineral mining installation

    Energy Technology Data Exchange (ETDEWEB)

    Becker, K.; Rosenberg, H.; Weirich, W.

    1981-12-29

    A longwall mineral mining installation has a conveyor and a plurality of roof support units positioned side-by-side on the goaf side of the conveyor. Each roof support unit has a roof shield having an advanceable shield extension. Each unit has a first hydraulic ram for extending its shield extension, and a second hydraulic ram for advancing the conveyor. The extension of each first ram is controlled in dependence upon the retraction of one of the second rams (Either the second ram of the same unit or that of an adjacent unit). This control is effected by controlling the supply of pressurized hydraulic fluid to the first rams. In one embodiment this is carried out by a control valve which has a spring-loaded plunger which engages with a series of equispaced cams on the movable cylinder of the associated second ram. In another embodiment, the piston rods of the rams are provided with series of equispaced magnets. The cylinders of the rams are provided with sensors, which sense the magnets and generate control signals. A control box is provided to direct the control signals to control valves associated with the rams, so that the first rams are extended by the same distance as that through which the second rams are retracted.

  8. Mineral mining installation

    Energy Technology Data Exchange (ETDEWEB)

    Weirich, W.

    1984-01-24

    A longwall mineral mining installation has a conveyor and a plurality of roof support units positioned side-by-side on the goaf side of the conveyor. Each roof support unit has a roof shield having an advanceable shield extension. Each unit has a first hydraulic ram for extending its shield extension, and a second hydraulic ram for advancing the conveyor. The extension of each first ram is controlled in dependence upon the retraction of one of the second rams (either the second ram of the same unit or that of an adjacent unit). This control is effected by controlling the supply of pressurized hydraulic fluid to the first rams. In one embodiment this is carried out by a control valve which has a springloaded plunger which engages with a series of equispaced cams on the movable cylinder of the associated second ram. In another embodiment, the piston rods of the rams are provided with series of equispaced magnets. The cylinders of the rams are provided with sensors, which sense the magnets and generate control signals. A control box is provided to direct the control signals to control valves associated with the rams, so that the first rams are extended by the same distance as that through which the second rams are retracted.

  9. 钢中非金属夹杂物的形成及评判浅析%ANALYSIS OF FORMATION AND EVALUATION OF NON-METALLIC INCLUSIONS IN STEEL

    Institute of Scientific and Technical Information of China (English)

    瞿国鸿; 何开文; 张全新

    2014-01-01

    本文阐述了钢中非金属夹杂物的形成、分类及来源,以及非金属夹杂物数量、尺寸对钢材性能的影响,对评判非金属夹杂物的国家标准GB/T 10561新旧两个版本即2005版和1989版进行比较,分析了氮化物等沉淀相的特性及其对钢材的强化作用,阐明了2005版标准中关于将氮化物、碳化物、碳氮化合物、硼化物定性描述为沉淀相而不作为非金属夹杂物的评判是适宜的。%This paper describes the formation , classification and source of non -metallic inclusions in steel , and the influence of their quantity and size on the performance of steels .It compares the commons and differences between the new National Standard GB /T10561 2005 version with the old 1989 version for evaluating non-metallic inclusions , and analyzes the characteristics of the precipitated phase such as the nitride and the strengthening effect to the steel , and explains that it is appropriate to evaluate ni-trides, carbides, hydrocarbons and boride as precipitated phase not as non -metallic inclusions.

  10. Review on Insensitive Non-metallic Energetic Ionic Compounds of Tetrazolate Anions%不敏感四唑非金属含能离子化合物的研究进展

    Institute of Scientific and Technical Information of China (English)

    毕福强; 樊学忠; 许诚; 王伯周; 郑亚峰; 葛忠学; 刘庆

    2012-01-01

    四唑非金属含能离子化合物是近年来逐渐发展起来的一类新型不敏感含能材料.综述了以氨基四唑、硝基四唑、硝氨基四唑、偶氮四唑和呋咱取代四唑为阴离子的不敏感非金属含能离子化合物的研究进展,结果表明,5位连有硝基和硝氨基等传统含能基团的四唑离子化合物的感度普遍较高,而以氨基四唑、偶氮四唑和4-氨基-3-(四唑基)呋咱为阴离子的含能化合物有望在不敏感含能材料领域得到广泛应用,并进而提出了不敏感四唑非金属含能离子化合物研究的发展方向.%Non-metallic energetic ionic compounds of tetrazolate anion are a kind of insensitive energetic materials. The progresses in the insensitive non-metallic energetic salts of aminotetrazolate, nitrotetrazolate, nitraminotetrazolate, azotetrazolate and furazan fuctionalized tetrazolate anions were reviewed in detail. It is found that most of ionic compounds based on tetrazolate anions which contain traditional energetic functionalities upon the carbon of positon 5 such as nitro and nitrimino functionalities, show high sensitivities, while the sensitivities of ionic compounds based on 5-aminotetrazolate, 5, 5'-azotetrazolate and 5-(4-aminofurazan-3-yl)tetrazolate are so low that they can be used as insensitive energetic materials. Furthermore, new trends in research of insensitive non-metallic energetic ionic compounds of tetrazolate anion were proposed.

  11. An innovate method to recycle non-metallic materials from waste printed circuit board.%废线路板非金属物料再生利用新型工艺研究

    Institute of Scientific and Technical Information of China (English)

    段华波; 李金惠; 王斯婷

    2012-01-01

    The reuse of non-metallic material separated from PWBs residues before and after thermo-shocked pretreatment was investigated. With the blending of various additives from silane coupling agents, lubricant agents, anti-oxidizing agents to processing modifier, the non-metallic material could be filled to produce polymeric composite materials subjected to the injection and molding processes. Said method was also appropriate to thermo-shocked non-metallic material. The mechanical property was qualified by compared with the standard limit of related composite materials. The maximum amount of recyclate that could be added to a composite board was 30% of weight, with the additive agents of: silane coupling agents (1%), lubricant agents (1%), anti-oxidizing agents (1%) and processing modifier (5%).%以加热改性处理前后的废线路板非金属物料为对象,对其再生利用工艺进行了研究.通过添加硅烷偶联剂、润滑剂、抗氧化剂和改性剂等助剂改性共混,基于挤出注塑成型工艺过程,可制备废线路板非金属物料填充增强聚丙烯复合板材,该工艺同时可适合一定温度条件下加热改性处理后的非金属物料,其主要力学性能符合相关制品产品质量标准.确定的优化参数为:非金属物料添加质量分数30%,添加助剂包括硅烷偶联剂(1%)、润滑剂(1%)、抗氧化剂(1%)和改性剂(5%).

  12. Industrious Landscaping

    DEFF Research Database (Denmark)

    Brichet, Nathalia Sofie; Hastrup, Frida

    2017-01-01

    This article offers a history of landscaping at Søby brown coal beds – a former mining site in western Denmark. Exploring this industrial landscape through a series of projects that have made different natural resources appear, we argue that what is even recognized as resources shifts over time...... according to radically different and unpredictable agendas. Natural resources emerge as feats of particular political and historical landscape configurations, rather than fixed dormant sediments waiting to be exploited. This indicates that the Søby landscape is fundamentally volatile, as its resourcefulness...... such as Søby both natural resources and historical developments are made through particular ad hoc perspectives, somehow providing their own argument on the basis of the ends they are seen to meet.. This view of natural resources and development processes as perspectival accomplishments calls for a detailed...

  13. Economic drivers of mineral supply

    Science.gov (United States)

    Wagner, Lorie A.; Sullivan, Daniel E.; Sznopek, John L.

    2003-01-01

    The debate over the adequacy of future supplies of mineral resources continues in light of the growing use of mineral-based materials in the United States. According to the U.S. Geological Survey, the quantity of new materials utilized each year has dramatically increased from 161 million tons2 in 1900 to 3.2 billion tons in 2000. Of all the materials used during the 20th century in the United States, more than half were used in the last 25 years. With the Earth?s endowment of natural resources remaining constant, and increased demand for resources, economic theory states that as depletion approaches, prices rise. This study shows that many economic drivers (conditions that create an economic incentive for producers to act in a particular way) such as the impact of globalization, technological improvements, productivity increases, and efficient materials usage are at work simultaneously to impact minerals markets and supply. As a result of these economic drivers, the historical price trend of mineral prices3 in constant dollars has declined as demand has risen. When price is measured by the cost in human effort, the price trend also has been almost steadily downward. Although the United States economy continues its increasing mineral consumption trend, the supply of minerals has been able to keep pace. This study shows that in general supply has grown faster than demand, causing a declining trend in mineral prices.

  14. Minerals processing opportunities for New South Wales and Australia

    Energy Technology Data Exchange (ETDEWEB)

    Fraser, R. (Pasminco Mining, NSW (Australia))

    1991-03-01

    An account is given of the main findings and recommendations of a report presented in September 1990 by the NSW Task Force on Mineral Processing Development Strategies. The Task Force considered that the best opportunities fell into two categories: existing industries with development potential (steel, aluminium, refractories, zinc, lead, copper, coke, dimension stone and gemstones) and new opportunities (in processing of titanium, titanium dioxide pigment, rare earths, silicon, fused silica, advanced ceramics, mullite and magnesium). Potential for development of the minerals is discussed. Australia is seen as being in an excellent position to capitalize on recent economic changes and new technolgies. Coal, except for value-added coal products and petroleum were excluded from the study - a separate task force has been set up to consider the NSW coal industry. 1 ref., 2 figs., 1 tab.

  15. Recent trends in Cuba's mining and petroleum industries

    Science.gov (United States)

    Wacaster, Susan; Baker, Michael S.; Soto-Viruet, Yadira; Textoris, Steven D.

    2015-01-01

    The Report is Temporarily UnavailableIn response to recent diplomatic developments between Cuba and the United States, the National Minerals Information Center compiled available information on the mineral industries of Cuba. This fact sheet highlights a new map and table that identify mines, mineral processing facilities, and petroleum facilities as well as information on location, operational status, and ownership. It also addresses the current status of known mineral industry projects, historical developments, and trends of the Cuban economy with an emphasis on mineral industries, and the supply and demand for Cuba’s mineral resources.In 2013, Cuba was estimated to be among the world’s top ten producers of cobalt and nickel, which are the country’s leading exports. Cuba’s current crude oil and associated natural gas production from onshore and shallow water coastal reservoirs is approximately 50,000 barrels per day of liquids and about 20,000 barrels per day oil equivalent of natural gas. In 2013, the value of mining and quarrying activities accounted for 0.6 percent of Cuba’s gross domestic product (GDP), compared with 1.4 percent in 2000. The value of production from Cuba’s industrial manufacturing sector increased by 88 percent between 1993 and 2013 whereas the sector’s share in the GDP decreased by about 3 percent during the same time period reflecting economic growth in other sectors of the economy.

  16. Glycine Polymerization on Oxide Minerals

    Science.gov (United States)

    Kitadai, Norio; Oonishi, Hiroyuki; Umemoto, Koichiro; Usui, Tomohiro; Fukushi, Keisuke; Nakashima, Satoru

    2016-07-01

    It has long been suggested that mineral surfaces played an important role in peptide bond formation on the primitive Earth. However, it remains unclear which mineral species was key to the prebiotic processes. This is because great discrepancies exist among the reported catalytic efficiencies of minerals for amino acid polymerizations, owing to mutually different experimental conditions. This study examined polymerization of glycine (Gly) on nine oxide minerals (amorphous silica, quartz, α-alumina and γ-alumina, anatase, rutile, hematite, magnetite, and forsterite) using identical preparation, heating, and analytical procedures. Results showed that a rutile surface is the most effective site for Gly polymerization in terms of both amounts and lengths of Gly polymers synthesized. The catalytic efficiency decreased as rutile > anatase > γ-alumina > forsterite > α- alumina > magnetite > hematite > quartz > amorphous silica. Based on reported molecular-level information for adsorption of Gly on these minerals, polymerization activation was inferred to have arisen from deprotonation of the NH3 + group of adsorbed Gly to the nucleophilic NH2 group, and from withdrawal of electron density from the carboxyl carbon to the surface metal ions. The orientation of adsorbed Gly on minerals is also a factor influencing the Gly reactivity. The examination of Gly-mineral interactions under identical experimental conditions has enabled the direct comparison of various minerals' catalytic efficiencies and has made discussion of polymerization mechanisms and their relative influences possible Further systematic investigations using the approach reported herein (which are expected to be fruitful) combined with future microscopic surface analyses will elucidate the role of minerals in the process of abiotic peptide bond formation.

  17. Mineral mining machines

    Energy Technology Data Exchange (ETDEWEB)

    Mc Gaw, B.H.

    1984-01-01

    A machine for mining minerals is patented. It is a cutter loader with a drum actuating element of the worm type equipped with a multitude of cutting teeth reinforced with tungsten carbide. A feature of the patented machine is that all of the cutting teeth and holders on the drum have the identical design. This is achieved through selecting a slant angle for the cutting teeth which is the mean between the slant angle of the conventional radial teeth and the slant angle of the advance teeth. This, in turn, is provided thanks to the corresponding slant of the holders relative to the drum and (or) the slant of the cutting part of the teeth relative to their stems. Thus, the advance teeth projecting beyond the surface of the drum on the face side and providing upper and lateral clearances have the same angle of attack as the radial teeth, that is, from 20 to 35 degrees. A series of modifications of the cutting teeth is patented. One of the designs allows the cutting tooth to occupy a varying position relative to the drum, from the conventional vertical to an inverted, axially projecting position. In the last case the tooth in the extraction process provides the upper and lateral clearances for the drum on the face side. Among the different modifications of the cutting teeth, a design is proposed which provides for the presence of a stem which is shaped like a truncated cone. This particular stem is designed for use jointly with a wedge which unfastens the teeth and is placed in a holder. The latter is completed in a transverse slot thanks to which the rear end of the stem is compressed, which simplifies replacement of a tooth. Channels are provided in the patented machine for feeding water to the worm spiral, the holders and the cutting teeth themselves in order to deal with dust.

  18. Mineral Commodity Profiles -- Rubidium

    Science.gov (United States)

    Butterman, W.C.; Reese, R.G.

    2003-01-01

    Overview -- Rubidium is a soft, ductile, silvery-white metal that melts at 39.3 ?C. One of the alkali metals, it is positioned in group 1 (or IA) of the periodic table between potassium and cesium. Naturally occurring rubidium is slightly radioactive. Rubidium is an extremely reactive metal--it ignites spontaneously in the presence of air and decomposes water explosively, igniting the liberated hydrogen. Because of its reactivity, the metal and several of its compounds are hazardous materials, and must be stored and transported in isolation from possible reactants. Although rubidium is more abundant in the earth?s crust than copper, lead, or zinc, it forms no minerals of its own, and is, or has been, produced in small quantities as a byproduct of the processing of cesium and lithium ores taken from a few small deposits in Canada, Namibia, and Zambia. In the United States, the metal and its compounds are produced from imported raw materials by at least one company, the Cabot Corporation (Cabot, 2003). Rubidium is used interchangeably or together with cesium in many uses. Its principal application is in specialty glasses used in fiber optic telecommunication systems. Rubidium?s photoemissive properties have led to its use in night-vision devices, photoelectric cells, and photomultiplier tubes. It has several uses in medical science, such as in positron emission tomographic (PET) imaging, the treatment of epilepsy, and the ultracentrifugal separation of nucleic acids and viruses. A dozen or more other uses are known, which include use as a cocatalyst for several organic reactions and in frequency reference oscillators for telecommunications network synchronization. The market for rubidium is extremely small, amounting to 1 to 2 metric tons per year (t/yr) in the United States. World resources are vast compared with demand.

  19. Book review: Mineral resource estimation

    Science.gov (United States)

    Mihalasky, Mark J.

    2016-01-01

    Mineral Resource Estimation is about estimating mineral resources at the scale of an ore deposit and is not to be mistaken with mineral resource assessment, which is undertaken at a significantly broader scale, even if similar data and geospatial/geostatistical methods are used. The book describes geological, statistical, and geostatistical tools and methodologies used in resource estimation and modeling, and presents case studies for illustration. The target audience is the expert, which includes professional mining geologists and engineers, as well as graduate-level and advanced undergraduate students.

  20. Measurement and Modelling of Scaling Minerals

    DEFF Research Database (Denmark)

    Villafafila Garcia, Ada

    2005-01-01

    of scale formation found in many industrial processes, and especially in oilfield and geothermal operations. We want to contribute to the study of this problem by releasing a simple and accurate thermodynamic model capable of calculating the behaviour of scaling minerals, covering a wide range...... of temperature and pressure. Reliable experimental solubility measurements under conditions similar to those found in reality will help the development of strong and consistent models. Chapter 1 is a short introduction to the problem of scale formation, the model chosen to study it, and the experiments performed...... the thermodynamic model used in this Ph.D. project. A review of alternative activity coefficient models an earlier work on scale formation is provided. A guideline to the parameter estimation procedure and the number of parameters estimated in the present work are also described. The prediction of solid...