WorldWideScience

Sample records for non-metal mining industry

  1. Analysis of industry development of building materials and ore mining and dressing of non-metallic minerals%2011年建材及非金属矿采选业行业发展分析

    Institute of Scientific and Technical Information of China (English)

    何军生

    2012-01-01

    In 2011, the growth of building materials production remained stable, industrial structure contiuned to optimise, economic porfits improved. In this paper, the author firstly discusses economic operation of building materials and ore mining and dressing of non-metallic minerals in 2011, to adjust the industrial structure of building materials and ore mining and dressing of non-metallic minerals to impove the quality of the economic operation, predicts the development trend of industry of building materials and ore mining and dressing of non-metallic minerals in 2012. At last, the author puts forward to policy suggestions which accelerate industry deleopment of the building materials and ore mining and dressing of non-metallic minerals%2011年建材工业生产增长速度保持平稳,产业结构继续优化,经济效益提高.本文首先讨论了2011年建材工业经济及非金属矿采选行业经济运行情况,做到调整建材及非金属矿选行业产业结构,提高经济运行质量,预测了2012年建材及非金属矿选行业未来发展趋势,最后提出促进建材及非金属矿选行业发展的政策建议.

  2. MINING INDUSTRY IN CROATIA

    Directory of Open Access Journals (Sweden)

    Slavko Vujec

    1996-12-01

    Full Text Available The trends of World and European mine industry is presented with introductory short review. The mining industry is very important in economy of Croatia, because of cover most of needed petroleum and natural gas quantity, total construction raw materials and industrial non-metallic raw minerals. Detail quantitative presentation of mineral raw material production is compared with pre-war situation. The value of annual production is represented for each raw mineral (the paper is published in Croatian.

  3. The diesel exhaust in miners study: IV. Estimating historical exposures to diesel exhaust in underground non-metal mining facilities.

    NARCIS (Netherlands)

    Vermeulen, R.; Coble, J.B.; Lubin, J.H.; Portengen, L.; Blair, A.; Attfield, M.D.; Silverman, D.T.; Stewart, P.A.

    2010-01-01

    We developed quantitative estimates of historical exposures to respirable elemental carbon (REC) for an epidemiologic study of mortality, including lung cancer, among diesel-exposed miners at eight non-metal mining facilities [the Diesel Exhaust in Miners Study (DEMS)]. Because there were no histori

  4. Soil effects on GPR detection of buried non-metallic mines

    NARCIS (Netherlands)

    Hendrickx, J.M.H.; Hong, S.H.; Miller, T.; Borchers, B.; Rhebergen, J.B.

    2003-01-01

    Landmines are a major problem in many areas of the world. In spite of the fact that many different types of landmine sensors have been developed, the detection of non-metallic landmines remains very difficult. The objective of this contribution is to synthesize our work related to the effects of soi

  5. Mining Industry Energy Bandwidth Study

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2007-07-01

    The Industrial Technologies Program (ITP) relies on analytical studies to identify large energy reduction opportunities in energy-intensive industries and uses these results to guide its R&D portfolio. The energy bandwidth illustrates the total energy-saving opportunity that exists in the industry if the current processes are improved by implementing more energy-efficient practices and by using advanced technologies. This bandwidth analysis report was conducted to assist the ITP Mining R&D program in identifying energy-saving opportunities in coal, metals, and mineral mining. These opportunities were analyzed in key mining processes of blasting, dewatering, drilling, digging, ventilation, materials handling, crushing, grinding, and separations.

  6. The Diesel Exhaust in Miners Study: IV. Estimating historical exposures to diesel exhaust in underground non-metal mining facilities.

    Science.gov (United States)

    Vermeulen, Roel; Coble, Joseph B; Lubin, Jay H; Portengen, Lützen; Blair, Aaron; Attfield, Michael D; Silverman, Debra T; Stewart, Patricia A

    2010-10-01

    We developed quantitative estimates of historical exposures to respirable elemental carbon (REC) for an epidemiologic study of mortality, including lung cancer, among diesel-exposed miners at eight non-metal mining facilities [the Diesel Exhaust in Miners Study (DEMS)]. Because there were no historical measurements of diesel exhaust (DE), historical REC (a component of DE) levels were estimated based on REC data from monitoring surveys conducted in 1998-2001 as part of the DEMS investigation. These values were adjusted for underground workers by carbon monoxide (CO) concentration trends in the mines derived from models of historical CO (another DE component) measurements and DE determinants such as engine horsepower (HP; 1 HP = 0.746 kW) and mine ventilation. CO was chosen to estimate historical changes because it was the most frequently measured DE component in our study facilities and it was found to correlate with REC exposure. Databases were constructed by facility and year with air sampling data and with information on the total rate of airflow exhausted from the underground operations in cubic feet per minute (CFM) (1 CFM = 0.0283 m³ min⁻¹), HP of the diesel equipment in use (ADJ HP), and other possible determinants. The ADJ HP purchased after 1990 (ADJ HP₁₉₉₀(+)) was also included to account for lower emissions from newer, cleaner engines. Facility-specific CO levels, relative to those in the DEMS survey year for each year back to the start of dieselization (1947-1967 depending on facility), were predicted based on models of observed CO concentrations and log-transformed (Ln) ADJ HP/CFM and Ln(ADJ HP₁₉₉₀(+)). The resulting temporal trends in relative CO levels were then multiplied by facility/department/job-specific REC estimates derived from the DEMS surveys personal measurements to obtain historical facility/department/job/year-specific REC exposure estimates. The facility-specific temporal trends of CO levels (and thus the REC

  7. Internet technologies in the mining industry. Towards unattended mining systems

    Energy Technology Data Exchange (ETDEWEB)

    Krzykawski, Michal [FAMUR Group, Katowice (Poland)

    2009-08-27

    Global suppliers of longwall systems focus mainly on maximising the efficiency of the equipment they manufacture. Given the fact that, since 2004, coal demand on world markets has been constantly on the increase, even during an economic downturn, this endeavour seems fully justified. However, it should be remembered that maximum efficiency must be accompanied by maximum safety of all underground operations. This statement is based on the belief that the mining industry, which exploits increasingly deep and dangerous coal beds, faces the necessity to implement comprehensive IT systems for managing all mining processes and, in the near future, to use unmanned mining systems, fully controllable from the mine surface. The computerisation of mines is an indispensable element of the development of the world mining industry, a belief which has been put into practice with e-mine, developed by the FAMUR Group. (orig.)

  8. Applied data mining for business and industry

    CERN Document Server

    Giudici, Paolo

    2009-01-01

    The increasing availability of data in our current, information overloaded society has led to the need for valid tools for its modelling and analysis. Data mining and applied statistical methods are the appropriate tools to extract knowledge from such data. This book provides an accessible introduction to data mining methods in a consistent and application oriented statistical framework, using case studies drawn from real industry projects and highlighting the use of data mining methods in a variety of business applications. Introduces data mining methods and applications.Covers classical and Bayesian multivariate statistical methodology as well as machine learning and computational data mining methods.Includes many recent developments such as association and sequence rules, graphical Markov models, lifetime value modelling, credit risk, operational risk and web mining.Features detailed case studies based on applied projects within industry.Incorporates discussion of data mining software, with case studies a...

  9. Energy Consumption and Carbon Dioxide Emissions of China’s Non-Metallic Mineral Products Industry: Present State, Prospects and Policy Analysis

    Directory of Open Access Journals (Sweden)

    Hui Hu

    2014-11-01

    Full Text Available China is the largest non-metallic mineral producer in the world and one of the key consumers of four major non-metallic mineral products, including cement, refractories, plate glass and ceramics. The non-metallic mineral products industry’s rapid growth has brought about a large demand for energy. The present study provides an overview of China’s non-metallic mineral products industry in terms of production, energy consumption and carbon dioxide emissions. In this industry, the energy efficiency is relatively low and the level of carbon dioxide emission is much higher than developed countries’ average. This study interprets the effects of some newly issued policies and analyses the influential factors in achieving energy conservation and emission reduction goals. It also discusses the prospects for saving energy and emission reduction in the industry. Retrofitting facilities and using new production technologies is imperative. Additionally, implementing market-based policies, promoting industrial transformation and effective international cooperation would help decrease carbon dioxide emissions and energy consumption.

  10. Self-regulation in the mining industry

    DEFF Research Database (Denmark)

    Sinding, Knud; Peck, Philip

    2013-01-01

    Many industries have established their own systems for self-regulation. They often do so when companies involved in the industry operate in countries where financial, technical, environmental and social regulation is weak and when the industry is challenged by legitimacy issues related to behaviour...... in one of these areas. One industry that has progressed unevenly down the road of self-regulation in these areas is mining. Developing self-regulation for mines and mining companies involves difficult questions of scope, rules, membership, assessment criteria and performance evaluation. While self...... issues related to the idea of self-regulation in the mining industry. Using the fact that in relation to technical and financial issues the industry is quite experienced in self-regulation, while it is more reluctant in areas such as environmental and social performance the case is made...

  11. Specific industrial medicine in lignite mining

    Energy Technology Data Exchange (ETDEWEB)

    Zerlett, G.; Toussaint, R.; Hilfert, R.; Koehne, G.

    1986-11-01

    Lignite is almost exclusively mined open-cast in West Germany. Mining is carried out at present in deep open-cast mines (with depths up to 400 m) using modern mining conveyer techniques with large-scale equipment (rotary bucket excavators and thickeners) conveyer belt and railway links as well as earth-moving equipment (accessory equipment). Specific occupational diseases are not known in lignite mining. Occupational diseases in the sense of degenerative processes of the lumbar spine and avulsion fractures of spinous processes of the lower cervical spine in drivers of earth-moving equipment as a result of whole-body vibration stress have been observed. In the context of occupational disease and industrial accident prevention, close collaboration and a division of labor between industrial physicians and safety engineers of ergonomics specialists have proved to be very efficient. Industrial medical preventive examinations based on statutory regulations and the lignite mining ordinance have a long tradition and are given a great deal of space. First aid at work is organized in a largely decentralized manner owing to the extensiveness of the mining area. The industrial medical care of the employees takes place on site in the various sections (open-cast mining, workshops, brickett factories, processing units etc.). The entire medical technical diagnostics is carried out centrally in an industrial medical center.

  12. Proximity to mining industry and cancer mortality.

    Science.gov (United States)

    Fernández-Navarro, Pablo; García-Pérez, Javier; Ramis, Rebeca; Boldo, Elena; López-Abente, Gonzalo

    2012-10-01

    Mining installations are releasing toxic substances into the environment which could pose a health problem to populations in their vicinity. We sought to investigate whether there might be excess cancer-related mortality in populations residing in towns lying in the vicinity of Spanish mining industries governed by the Integrated Pollution Prevention and Control Directive, and the European Pollutant Release and Transfer Register Regulation, according to the type of extraction method used. An ecologic study was designed to examine municipal mortality due to 32 types of cancer, across the period 1997 through 2006. Population exposure to pollution was estimated on the basis of distance from town of residence to pollution source. Poisson regression models, using the Bayesian conditional autoregressive model proposed by Besag, York and Molliè and Integrated Nested Laplace Approximations for Bayesian inference, were used: to analyze risk of dying from cancer in a 5-kilometer zone around mining installations; effect of type of industrial activity; and to conduct individual analyses within a 50-kilometer radius of each installation. Excess mortality (relative risk, 95% credible interval) of colorectal cancer (1.097, 1.041-1.157), lung cancer (1.066, 1.009-1.126) specifically related with proximity to opencast coal mining, bladder cancer (1.106, 1.016-1.203) and leukemia (1.093, 1.003-1.191) related with other opencast mining installations, was detected among the overall population in the vicinity of mining installations. Other tumors also associated in the stratified analysis by type of mine, were: thyroid, gallbladder and liver cancers (underground coal installations); brain cancer (opencast coal mining); stomach cancer (coal and other opencast mining installations); and myeloma (underground mining installations). The results suggested an association between risk of dying due to digestive, respiratory, hematologic and thyroid cancers and proximity to Spanish mining

  13. Monte Carlo simulations as a feasibility tool for non-metallic land-mine detection by thermal-neutron backscattering

    NARCIS (Netherlands)

    Maucec, M; de Meijer, RJ

    2002-01-01

    The use of Monte Carlo simulations is presented for modelling a simplified land-mine detector system with thermal neutron backscattering (TNB) analysis based on a Cf-252-neutron source. Different aspects and a variety of external conditions, related to localisation and identification of a buried obj

  14. Chuquicamata: Copper Mining Industrial Heritage in Chile

    OpenAIRE

    Gutiérrez-Viñuales, Alejo; Centro de Documentación de Arquitectura y Arte Latinoamericanos, Cedodal

    2014-01-01

    Facing Chuquicamata’s recent abandonment as residential area due to the mining process, it becomes necessary tovalue its qualities as industrial heritage. Therefore, it is important to study not only the relevant built structures, but alsothe geographical and historical space that has been transformed by this mining project during almost a century. Ante el reciente abandono de Chuquicamata como área residencial debido al negocio minero, se hace necesaria lapuesta en valor y apreciación de ...

  15. Role of Data mining in Insurance Industry

    Directory of Open Access Journals (Sweden)

    K. Umamaheswari

    2014-06-01

    Full Text Available n the global era, Insurance systems rapidly a lot of tremendous development in our society. Due to the increased stress in day-to-day life, the growth of demand of insurance increased. Data mining helps insurance firms to discovery useful patterns from the customer database. The purpose of the paper aims to present how data mining is useful in the insurance industry, how its techniques produce good results in insurance sector and how data mining enhance in decision making using insurance data. The conceptual paper is written based on secondary study, observation from various journals, magazines and reports.

  16. Role of Data mining in Insurance Industry

    Directory of Open Access Journals (Sweden)

    K. Umamaheswari

    2015-11-01

    Full Text Available In the global era, Insurance systems rapidly a lot of tremendous development in our society. Due to the increased stress in day-to-day life, the growth of demand of insurance increased. Data mining helps insurance firms to discovery useful patterns from the customer database. The purpose of the paper aims to present how data mining is useful in the insurance industry, how its techniques produce good results in insurance sector and how data mining enhance in decision making using insurance data. The conceptual paper is written based on secondary study, observation from various journals, magazines and reports.

  17. How CSIR research aids mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Vorster, H.

    1987-04-01

    The paper outlines supporting services to mining by the Council for Scientific and Industrial Research (CSIR) in South Africa. At present three CSIR institutes are actively involved in the programme of the Coal Mining Research Controlling Council (CMRCC). The use of an ultra-modern blasting tunnel to determine the explosive characteristics of South African coal types is considered as well as investigations to determine the influence of strata conditions on the behaviour of different types of roof bolts. The work of the Strength Mechanics Division in checking design and cause of structural failures of mining equipment and the modernization of the coal preparation research plant is described.

  18. The mining industry of the 21st century

    OpenAIRE

    2014-01-01

    The mining industry has been a significant contributor to the South African economy for over 100 years and it currently contributes 18% to the economy. The richest city in Africa, the City of Johannesburg was built on the backbone of the mining industry. If the mining industry was to collapse, the South African economy will trail behind Nigeria. One distinguishing factor about the Mining Industry in South Africa is that it relies quite extensively on labour. In this regard, the mining industr...

  19. Aggregate and Mineral Resources - Industrial Mineral Mining Operations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — An Industrial Mineral Mining Operation is a DEP primary facility type related to the Industrial Mineral Mining Program. The sub-facility types are listed below:Deep...

  20. Aggregate and Mineral Resources - Industrial Mineral Mining Operations

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — An Industrial Mineral Mining Operation is a DEP primary facility type related to the Industrial Mineral Mining Program. The sub-facility types are listed below:Deep...

  1. Mines, Non-Coal (Abandoned), Non_metalic_mines_closed, Published in 2007, 1:600 (1in=50ft) scale, Buffalo County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Mines, Non-Coal (Abandoned) dataset, published at 1:600 (1in=50ft) scale, was produced all or in part from Orthoimagery information as of 2007. It is described...

  2. Mines, Non-Coal (Active), Non_metalic_mines_open, Published in 2007, 1:600 (1in=50ft) scale, Buffalo County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Mines, Non-Coal (Active) dataset, published at 1:600 (1in=50ft) scale, was produced all or in part from Orthoimagery information as of 2007. It is described as...

  3. Mining Technology. An Assessment Study for Educational Institutions Potential Involvement in Servicing the Mining Industry.

    Science.gov (United States)

    Westmoreland County Community Coll., Youngwood, PA.

    Prepared to serve the 2-year college administrator and faculty member in becoming acquainted with the coal mining industry and in developing degree and nondegree programs in mining technology, this report provides descriptions of the mining industry, organization of labor, job descriptions, types and methods of coal mining, certification…

  4. Applications of Radio Frequency Identification (RFID) in Mining Industries

    Science.gov (United States)

    Khairul Nizam Mahmad, Mohd; Z, Mohd Remy Rozainy M. A.; Baharun, Norlia

    2016-06-01

    RFID technology has recently become a dream of many companies or organizations because of its strategic potential in transforming mining operations. Now is the perfect time, for RFID technology arise as the next revolution in mining industries. This paper will review regarding the application of RFID in mining industries and access knowledge regarding RFID technology and overseen the opportunity of this technology to become an importance element in mining industries. The application of Radio-Frequency Identification (RFID) in mining industries includes to control of Personal Protective Equipment (PPE), control of personnel to access mining sites and RFID solutions for tracking explosives.

  5. [Occupational hazads in metal mining industry].

    Science.gov (United States)

    Saarkoppel', L M; Rushkevich, O P; Kir'iakov, V A; Sineva, E L; Kazantsev, D P

    2005-01-01

    Miners of basic professions employed in contemporary metal mining industry are exposed to a range of industrial factors, such as vibration, noise, dustiness, and unfavorable microclimate. Long-term exposure to these factors is hazardous to their health, which is manifested by elevated general and occupational morbidity and a higher rate of biological aging. This is most typical of Far North miners, who are exposed to the combination of the industrial factors and extremal climate and geographic conditions. Research into the health status of miners engaged to underground works and open excavations in regions with contrasting climate and geographic conditions, allowed determination of main industrial risk factors (vibration and noise), leading occupational diseases and groups of high risk of their development (according to the occupation and the length of service). The study found high risk of cardivascular diseases as well as pathology of the musculoskeletal system, which was highest in miners in Norilsk region.

  6. Acclimatization Services to the Mining Industry: Statistics for 1990

    CSIR Research Space (South Africa)

    Hitge, JJ

    1991-10-01

    Full Text Available and the incidents of heat stroke relative to mining industry in general. A total 41 mines employed heat tolerance testing and heat acclimatization of workers during 1990. Four categories of procedures are identified, namely (a) Mines where only the heat tolerance...

  7. Mining industry and US government cooperative research: Lessons learned and benefits to mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, D.C.; Stump, B.W.; Phillips, W.S. [Los Alamos National Lab., NM (United States). Earth and Environmental Sciences Div.; Martin, R. [Thunder Basin Coal Co. (United States); Anderson, D.P. [Southern Methodist Univ., Dallas, TX (United States). Dept. of Geological Sciences

    1997-09-01

    Since 1994, various mines in the US have cooperated with research scientists at the Los Alamos and Lawrence Livermore National Laboratories to address issues related to verification of the Comprehensive Test Ban Treaty (CTBT). The CTBT requires that no country may conduct any nuclear explosion in the future. While the CTBT is a significant step toward reducing the global nuclear danger, verifying compliance with the treat requires that the monitoring system be able to detect, locate and identify much larger numbers of smaller amplitude seismic events than had been required previously. Large mining blasts conducted world-wide will be of sufficient amplitude to trigger the monitoring system at the lower threshold. It is therefore imperative that research into the range various blasting practices employed, the relationship of yield to seismic magnitude, and identification of anomalous blasting results be performed. This paper will describe a suite of experiments funded by the Department of Energy and conducted by the Los Alamos and Lawrence Livermore National Laboratories in cooperation with the US mining industry. Observations of cast blasting, underground long wall generated coal bumps, stoping, and explosively induced collapse of room and pillar panels will be presented. Results of these dual use experiments which are of interest to the mining community will be discussed. These include (1) variation of amplitude of seismic energy at various azimuths from cast blasts, (2) identification of the extent of back failure following explosive removal of pillars, and (3) the use of single fired shots for calibration of the monitoring system. The wealth of information and discovery described in this paper is a direct result of mutual cooperation between the US Government and the US Mining Industry.

  8. Official publications of the Ministry of Mining and Power Industry

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    A review is presented of publications issued by the Ministry since 1980. The following publications are evaluated: Gornictwo i Energetyka monthly (issued since 1984, official information on mining, power industry, energy policy of Poland), Vademecum ochrony i ksztaltowania srodowiska w resorcie gornictwa i energetyki (Environmental protection in mining and power industry, Warsaw, 1982, 1983, 1985 with data on environmental protection and a review of regulations), Zbior przepisow o stopniach gorniczych (Regulations on mining degrees, Warsaw, 1983), Rocznik statystyczny Ministerstwa Gornictwa i Energetyki 1984 (Statistical Yearbook of the Ministry of Mining and Power Industry 1984, covers 1981, 1982, 1983), Statystyka przemyslu weglowego w Polsce (Statistics of coal industry in Poland, confidential material), Statystyka rozwoju elektroenergetyki polskiej (Statistics of power industry development in Poland). A further 10 publications issued by the Ministry cover economic problems of the coal industry and power generation as well as regulations issued by the Ministry.

  9. Technological Measurement in the Mining Industry in Relation to Environmentally Friendly Mining

    OpenAIRE

    atuegbu, chukwunwike edwin

    2011-01-01

    The purpose of this thesis is to discuss in detail the significance of technology trends to the mining industry. Technological measurement in the mining industry in relation to environmentally friendly mining is examined. The main research question seeks to find out how technologies have transformed the face of the environment and future potentials. The methodology employed in the study, scope and the importance of the research are discussed. The present study has attempted to prove that...

  10. Economic Limit of Coal Mining Closedown in Restructuring Coal Industry

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    One of the key points in restructuring the coal industry is to close some deficient coal mines which haveneither economic result nor social benefit. Based on the relationship among production, cost, and profit, differenteconomic limits for closing coal mines in different cases were put forward. The relationship between the profit andclosedown cost of deficient coal mines was analyzed and an overall economic limit for closing a deficient coal minewas also proposed.

  11. Usage of Safety Gloves in the Gold Mining Industry

    CSIR Research Space (South Africa)

    Scheepers, JCE

    1978-10-01

    Full Text Available The safety departments of 31 mines were visited, and the data obtained was used to determine to what extent safety gloves were being used in the gold mining industry. The frequency of occurrence of hand injuries amongst black workers of the gold...

  12. From Mining to Post-Mining: The Sustainable Development Strategy of the German Hard Coal Mining Industry

    Science.gov (United States)

    Kretschmann, J.; Efremenkov, A. B.; Khoreshok, A. A.

    2017-01-01

    By the end of the 1950s, the German coal mining industry produced 150 million tons of hard coal per year in 170 collieries with 600,000 employees. At that time, 70% of the primary energy demand of the Federal Republic of Germany was covered by domestic coal. Since the advance of oil, later of natural gas, in the world energy market and with the growth of world coal trade, domestic coal stood under a long-term restructuring pressure. This decision required a new strategy for the coal mining industry. Now German coal mining will be strictly finalized and will be prepared for the post-mining era. Within a sustainability strategy the long-term impacts of mining activities before and after the mine closures concerning the environmental, economic and social dimensions will be analyzed systematically and forward-looking.

  13. [Osteopenia in workers engaged into mining industry].

    Science.gov (United States)

    Kudasheva, A R; Iakupov, R R

    2011-01-01

    The study was aimed to evaluate prevalence of osteopenia in miners engaged into deep-mined output of copper-zinc pyrite. The examinees were 130 males with clinical manifestations of bone and joint disorders, including 85 drifters engaged into underground mining (main group) and 45 individuals of surface occupations. Hazardous work conditions (4 degree of 3 class) cause in workers engaged into deep-mined output of copper-zinc pyrite risk of osteopenia that is more prevalent than in the surface occupations workers and is highly related with the occupation.

  14. OCCUPATIONAL SAFETY AND RISK ASSESSMENT IN THE MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Slobodan Radosavljević

    2008-12-01

    Full Text Available Global dynamics of the technological changes creates a need for modern approaches while evaluating and analysing the risk in the mining industry. Analysing and managing technical systems in the mining industry is a key factor concerning the quality of their functioning. Dependability, safety, and maintenance management based on the risk analysis can contribute substantially to the overall effectiveness and efficiency of the mining technological systems. Besides applying adequate technology, organizing and harmonizing the system links among various structures and standardization is of the great importance in achieving business goals. The choice and use of the optimal solutions in the analysis ought to recognize, anticipate, forestall, reduce, and minimize the risk and possible destructive applications. The mining industry production practice recognizes the need for the strategy of organizational and process redesigning as well as raising this issue to the level of the other managing functions of the company. A realistic view of the present state in the risk analysis shows the need for the rapid transformation in the mining industry. The study puts forward a proposal for the possible approaches and improvement relating to the following and implementing modern, standardized world trends, (models and methods concerning the analysis of the technical and occupational safety risk in some of the basic processes in the mining industry.

  15. Economical Recovery of By-products in the Mining Industry

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    2001-12-05

    The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which generate between 23,300,000 and 24,000,000 metric tons per year. The distribution of residual elements in process residues and wastes varies over wide ranges* because of variations in the original ore content as it is extracted from the earth's crust. In the earth's crust, the elements of interest to mining fall into two general geochemical classifications, lithophiles and chalcophiles** (Cox 1997). Groups of elements are almost always present together in a given geochemical classification, but the relative amounts of each element are unique to a particular ore body. This paper

  16. Managing trauma in the South African mining industry.

    Science.gov (United States)

    Maiden, R Paul

    2005-01-01

    Deep sub-surface mining is one of South Africa s leading industries. It is also one of the most dangerous. While safety is maintained as much as possible to minimize cave-ins and other accidents, underground tremors and earthquakes are commonplace and unpredictable and usually involve life threatening injuries and loss of life. Crisis intervention and trauma management are essential to helping workers cope with mining accidents. This article describes the trauma management program developed by the employee assistance program at the Chamber of Mines in South Africa to respond to workplace accidents.

  17. Trends of the American coal mining industry and technology development

    Energy Technology Data Exchange (ETDEWEB)

    Graham, M.J. [Joy Mining Machinery (USA)

    2000-03-01

    An overview is presented of the USA's coal mining industry, emphasising energy trends and driving forces. The focus of the drive for increased productivity has shifted to technology. Several pieces of high-tech mining equipment produced by Joy Mining Machinery is described. They include: the Joy 12CM27 continuous miner, the Multibolter, the Flexible Conveyor Train, Joy longwall roof supports, Joy armored face conveyors, Joy shearing machines, and Joy Network Architecture (JNA) system for underground machine control and diagnostics. 19 figs., 4 tabs.

  18. Evaluation of the Reclamation Suitability of Industrial and Mining Wasteland

    Institute of Scientific and Technical Information of China (English)

    Gengjie; ZHANG; Zhongke; BAI

    2013-01-01

    To evaluate the reclamation suitability of industrial and mining wasteland is the premise of reclamation. The wasteland was firstly categorized according to land use status and damage types. Then the evaluation process of reclamation suitability was introduced, which involves two steps, the first step was to exclude those unsuitable wasteland by the limits conditions, while the second step was to evaluate the suitability degree of those suitable wasteland. From the perspectives of soil fertility, soil pollution, farmland water conservancy and land damage, twelve evaluation factors, including soil depth, gravel content, bulk density, organic material content, pollution index, gradient, flatness, irrigation and drainage condition, source of borrowed earth, distance from the residential settlement, erosion modulus and damage extent, were selected to establish an index system for evaluating the abandoned industrial and mining land, aiming to provide references for the future reclamation of industrial and mining wasteland.

  19. The mining industry and globalisation; Bergbau und Globalisierung

    Energy Technology Data Exchange (ETDEWEB)

    Sames, C.W.; Kegel, K.E.

    2002-03-14

    Globalisation is confronting the international mining industry with major challenges, which are of a politico-institutional as well as a technico-scientific nature. The response of the mining industry lies in the successful adaptation to the structural change taking place at many levels and in a continuous increase in efficiency. This not only contributes to the decoupling of economic growth and use of raw materials, which is also desirable ecologically, but ensures that the mining industry retains its economical operational base in the long term. Hence the further liberalisation and globalisation of the world economy is of great importance for the mining industry precisely in view of some reservations and resistance to mining activities. (orig.) [German] Die Globalisierung stellt den internationalen Bergbau vor grosse Herausforderuengen, die sowohl politisch-institutioneller als auch technisch-wirtschaftlicher Natur sind. Die Antwort des Bergbaus liegt einmal in der erfolgreichen Anpassung an den auf vielen Ebenen stattfindenden Strukturwandel, zum anderen in stetiger Effizienzsteigerung. Dies traegt nicht nur zu der auch oekologisch erwuenschten Entkopplung von Wirtschaftswachstum und Rohstoffeinsatz bei, sondern sichert dem Bergbau langfristig seine wirtschaftliche Operationsbasis. Gerade angesichts mancher Vorbehalte und Widerstaende gegen bergbauliche Aktivitaeten ist die weitere Liberalisierung und Globalisierung der Weltwirtschaft von grosser Bedeutung fuer den Bergbau. (orig.)

  20. Applying data mining in the context of Industrial Internet

    Directory of Open Access Journals (Sweden)

    Oliviu Matei

    2016-01-01

    Full Text Available Nowadays, (industrial companies invest more and more in connecting with their clients and machines deployed to the clients. Mining all collected data brings up several technical challenges, but doing it means getting a lot of insight useful for improving equipments. We define two approaches in mining the data in the context of Industrial Internet, applied to one of the leading companies in shoe production lines, but easily extendible to any producer. For each approach, various machine learning algorithms are applied along with a voting system. This leads to a robust model, easy to adapt for any machine.

  1. US uranium mining industry: background information on economics and emissions

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, G.A.; Dirks, J.A.; Jackson, P.O.; Young, J.K.

    1984-03-01

    A review of the US uranium mining industry has revealed a generally depressed industry situation. The 1982 U/sub 3/O/sub 8/ production from both open-pit and underground mines declined to 3800 and 6300 tons respectively with the underground portion representing 46% of total production. US exploration and development has continued downward in 1982. Employment in the mining and milling sectors has dropped 31% and 17% respectively in 1982. Representative forecasts were developed for reactor fuel demand and U/sub 3/O/sub 8/ production for the years 1983 and 1990. Reactor fuel demand is estimated to increase from 15,900 tons to 21,300 tons U/sub 3/O/sub 8/ respectively. U/sub 3/O/sub 8/ production, however, is estimated to decrease from 10,600 tons to 9600 tons respectively. A field examination was conducted of 29 selected underground uranium mines that represent 84% of the 1982 underground production. Data was gathered regarding population, land ownership and private property valuation. An analysis of the increased cost to production resulting from the installation of 20-meter high exhaust borehole vent stacks was conducted. An assessment was made of the current and future /sup 222/Rn emission levels for a group of 27 uranium mines. It is shown that /sup 222/Rn emission rates are increasing from 10 individual operating mines through 1990 by 1.2 to 3.8 times. But for the group of 27 mines as a whole, a reduction of total /sup 222/Rn emissions is predicted due to 17 of the mines being shutdown and sealed. The estimated total /sup 222/Rn emission rate for this group of mines will be 105 Ci/yr by year end 1983 or 70% of the 1978-79 measured rate and 124 Ci/yr by year end 1990 or 83% of the 1978-79 measured rate.

  2. Dermatitis in the mining industry: incidence, sources, and time loss.

    Science.gov (United States)

    Poplin, Gerald S; Miller, Hugh D; Hintz, Patrick J; Martini, Laura; Burgess, Jefferey L

    2005-01-01

    Occupational skin diseases and disorders are the most commonly reported nontrauma-related category of occupational illness in the United States, and mining has one of the highest incidence rates among all industries. The authors' objective in this study was to describe mining industry dermatitis incidence, sources of exposure, and resultant time lost from work. The authors reviewed Mine Accident, Injury and Illness Reports. From 1983 to 2002, the Mine Safety and Health Administration reported 975 cases of dermatitis in mines across the United States and its territories. Average annual incidence was 14.4 cases per 100 000 employees. Upper extremities and multiple body regions were most commonly involved. Twenty-five percent of miners with dermatitis lost at least 1 day of work. Exposure to plants, trees, and vegetation accounted for 24% of all cases. A greater understanding of this condition will assist health professionals in focusing on appropriate intervention strategies to reduce the occurrence of dermatitis and its associated morbidity in mine workers.

  3. Training implications of reform in the Australian coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Casey, J. (NSW Coal Association, Sydney, NSW (Australia))

    1992-01-01

    In 1989 the Australian coal mining industry reached an agreement with the unions to restructure the industry improving efficiency and cost effectiveness. Part of this agreement was the provision of structured and accredited training for employees. The Australian coal mining industry has adopted the National Training Reform Agenda and a new system of competency-based training is currently being implemented across Australia. The aims of the new system are: (1) to improve the level and flexibility of skills in the workforce; to better meet the needs of industry; and to facilitate the progressive introduction of a competency based approach to training. Competency based training places the emphasis on what a person can do in the workplace after training rather than the quantity of training (e.g measured by cost or time spent). The paper describes the new training programme and the development of competency standards.

  4. Occupational health and safety in the mining industry in Morocco.

    Science.gov (United States)

    Laraqui, C H; Caubet, A; Harourate, K; Laraqui, O; Verger, C

    1999-01-01

    The mining sector is one of the pillars of our national economy. Our paper concerns safety and occupational health in the mining sector in Morocco. This sector employs 60,000 persons, more than half of them working in the phosphate sectors. There are 36 occupational medical services, with 83 practitioners 395 nurses and 91 agents, protecting 43,926 workers (73% of all personnel). The task of labour inspection in this sector is entrusted to mining engineers. The statistics of the central department of industrial inspection in mines from 1975 to 1995 show a fall in occupational injuries and a progressive increase reported in occupational diseases, 96% of which are silicosis. The improvement of prevention and health at work in the mining sector in Morocco has led to a reduction in occupational hazards and specially occupational injuries. However, an effort seems required so as to generalize occupational medical and safety services in all the mining enterprises and in the craft mining sector in particular.

  5. Electrical injuries in the US mining industry, 2000-2009.

    Science.gov (United States)

    Homce, G T; Cawley, J C

    The U.S. National Institute for Occupational Safety and Health (NIOSH) Office of Mine Safety and Health Research (OMSHR) conducted a study of mining industry electrical injuries reported to the U.S. Mine Safety and Health Administration (MSHA) for the years 2000 to 2009. The findings of that study are detailed in this paper, and serve to characterize the circumstances surrounding electrical injuries and identify causal factors. The study included three tasks: 1) a direct review of mining industry occupational injury data compiled by MSHA, 2) interpretation of the narrative descriptions available for the injuries (from MSHA data) and 3) a separate examination of fatal electrical injuries. Eight-hundred sixty-five electrical injuries were reported during the 10-year period studied, with 39 of those being fatalities. This makes electrical injuries disproportionately fatal with respect to most other types of injuries in mining. Electrical injury rates were higher in coal mining than noncoal mining and, within the coal sector, rates were higher in underground operations than in surface operations. Of the 865 total cases, electrical and machine maintenance or repair activities were involved in 580 (69%), and electricians and mechanics were injured in 362 cases (42%). Of the 39 fatal electrical injuries, 27 (69%) involved electrical maintenance or repair work, and in 21 of these 27 cases, the failure to de-energize, lock-out and tag the circuit was the cause or a contributing factor. Also, contractor employees had a much greater chance of an electrical injury being fatal than did mine operator employees. The top three root causes for fatal electrical injuries were 1) no or inadequate lock-out and tagging, 2) failure of power system components and 3) contact of overhead electrical power lines by mobile equipment.

  6. Multiplier Accounting of Indian Mining Industry--The Concept

    Science.gov (United States)

    Hussain, A.; Karmakar, N. C.

    2015-04-01

    Input-output multipliers are indicators used for predicting the total impact on an economy due to the changes in its industrial demand and output. Also, input-output tables provide detailed dissection of the intermediate transactions in an economy. The aim of the paper is to put forward a basic framework of input-output economics as well as the multiplier concept. The outline of the methodology for calculating the multiplier associated with Indian mining industry is also presented.

  7. Ototoxicity in the South African mining industry: a position paper

    CSIR Research Space (South Africa)

    Edwards, AL

    2013-02-01

    Full Text Available Despite the attention that Noise-induced hearing loss (NIHL) prevention has received in the mining industry since 2003 when the milestone to eliminate NIHL was set, the statistics show that NIHL persists as one of the most common occupational...

  8. Ototoxicity in the South African mining industry: a position paper

    CSIR Research Space (South Africa)

    Edwards, AL

    2013-02-01

    Full Text Available This position paper asserts that exposure to chemicals in certain occupations and work activities in the mining industry can lead to ototoxicity which accentuates the problem of noise-induced hearing loss (NIHL). Increased awareness of all factors...

  9. Global gene mining and the pharmaceutical industry

    DEFF Research Database (Denmark)

    Knudsen, Lisbeth E.

    2005-01-01

    for the efficiency of a given medicine or predisposition of a given disease are also subject to population studies, e.g., in Iceland, Estonia, Sweden, etc. For hypothesis testing and generation, several bio-banks with samples from patients and healthy persons within the pharmaceutical industry have been established...... may stigmatize patients leading to poor quality of life. This has raised the issue of 'genetic exceptionalism' justifying specific regulation of use of genetic information. Discussions on how to handle sampling and data are ongoing within the industry and the regulatory sphere, the European Agency...

  10. Multiplier Accounting of Indian Mining Industry: The Application

    Science.gov (United States)

    Hussain, Azhar; Karmakar, Netai Chandra

    2017-10-01

    In the previous paper (Hussain and Karmakar in Inst Eng India Ser, 2014. doi: 10.1007/s40033-014-0058-0), the concepts of input-output transaction matrix and multiplier were explained in detail. Input-output multipliers are indicators used for predicting the total impact on an economy due to changes in its industrial demand and output which is calculated using transaction matrix. The aim of this paper is to present an application of the concepts with respect to the mining industry, showing progress in different sectors of mining with time and explaining different outcomes from the results obtained. The analysis shows that a few mineral industries saw a significant growth in their multiplier values over the years.

  11. Multiplier Accounting of Indian Mining Industry: The Application

    Science.gov (United States)

    Hussain, Azhar; Karmakar, Netai Chandra

    2016-10-01

    In the previous paper (Hussain and Karmakar in Inst Eng India Ser, 2014. doi: 10.1007/s40033-014-0058-0), the concepts of input-output transaction matrix and multiplier were explained in detail. Input-output multipliers are indicators used for predicting the total impact on an economy due to changes in its industrial demand and output which is calculated using transaction matrix. The aim of this paper is to present an application of the concepts with respect to the mining industry, showing progress in different sectors of mining with time and explaining different outcomes from the results obtained. The analysis shows that a few mineral industries saw a significant growth in their multiplier values over the years.

  12. Recent trends in Cuba's mining and petroleum industries

    Science.gov (United States)

    Wacaster, Susan; Baker, Michael S.; Soto-Viruet, Yadira; Textoris, Steven D.

    2015-01-01

    In response to recent diplomatic developments between Cuba and the United States, the National Minerals Information Center compiled available information on the mineral industries of Cuba. This fact sheet highlights a new map and table that identify mines, mineral processing facilities, and petroleum facilities as well as information on location, operational status, and ownership. It also addresses the current status of known mineral industry projects, historical developments, and trends of the Cuban economy with an emphasis on mineral industries, and the supply and demand for Cuba’s mineral resources.

  13. Public Consultation Processes in Greenland Regarding the Mining Industry

    Directory of Open Access Journals (Sweden)

    Maria Ackrén

    2016-05-01

    Full Text Available Since the Greenland Self-Government Act came into force in 2009, economic development and the right to utilize natural resources in Greenland lies in the hands of the Self-Government. Earlier efforts to establish this authority were made back in the 1970s, when discussions on Home Rule were first on the agenda. Mining industries are not a new activity in Greenland. During the Second World War, Greenlandic cryolite was used to produce aluminum for the North American aircraft industry. Other essential natural resources, such as gold and gemstones, have also received international interest over the years. Greenland's new development aim is to build up a large-scale mining industry. This article elucidates the form of public consultation processes followed in Greenland in connection with two large-scale mining projects and the different views various actors have regarding these events. How did the deliberative democratic process unfold in Greenland regarding these projects? Was the process followed an effective way to manage these kinds of projects? The article shows that two projects that received a lot of media attention: the 2005 iron ore mine project in Isukasia, and the 2001 TANBREEZ-project to extract rare earth elements, used highly different approaches when it comes to deliberative democracy. In the former case, a limited degree of deliberative democracy was used, while in the latter case, the opposite applies.

  14. Mining equipment manufacturers: an industry sector analysis; 14th edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The report analyses and compares the financial ratios of mining equipment manufacturers in the United Kingdom. It includes companies who produce equipment for the mining industry such as cutting tools, drilling equipment, crushers, screens, centrifuges, tunnelling equipment, conveyors and other materials handling equipment, hydraulic equipment, filtration, pumping and mixing equipment and ventilation equipment. The report presents business ratios analysing profitability, efficiency, liquidity, employee-based ratios and a series of figures on growth rate. Accounting data for the individual companies are given, together with principal ratios, areas of activity, names of directors and company secretary, trading address and holding companies.

  15. Balancing environmental and industry sustainability: a case study of the US gold mining industry.

    Science.gov (United States)

    Finnie, Bruce; Stuart, Jeffrey; Gibson, Linda; Zabriskie, Fern

    2009-09-01

    Mandatory insurance requirements and/or mitigation fees (royalties) for mining companies may help reduce environmental risk exposure for the federal government. Mining is examined since the Environmental Protection Agency (EPA) Toxic Release Inventory reveals that this sector produces more hazardous waste than any other industrial sector. Although uncommon, environmental expense can exceed hundreds of millions of dollars per development. Of particular concern is the potential for mines to become unfunded Superfund sites. Monte Carlo simulation of risk exposure is used to establish a plausible range of unfunded federal liabilities associated with cyanide-leach gold mining. A model is developed to assess these costs and their impact on both the federal budget and corporate profitability (i.e., industry sustainability), particularly if such costs are borne by offending firms.

  16. Occupational lung diseases and the mining industry in Mongolia.

    Science.gov (United States)

    Lkhasuren, Oyuntogos; Takahashi, Ken; Dash-Onolt, Lkhamsuren

    2007-01-01

    Mining production has accounted for around 50% of the gross industrial product in Mongolia since 1998. Dust-induced chronic bronchitis and pneumoconiosis currently account for the largest relative share (67.8%) of occupational diseases in Mongolia, and cases are increasing annually. In 1967-2004, medically diagnosed cases of occupational diseases in Mongolia numbered 7,600. Of these, 5,154 were confirmed cases of dust-induced chronic bronchitis and pneumoconiosis. Lung diseases and other mining-sector health risks pose major challenges for Mongolia. Gold and coal mines, both formal and informal, contribute significantly to economic growth, but the prevalence of occupational lung diseases is high and access to health care is limited. Rapid implementation of an effective national program of silicosis elimination and pneumoconiosis reduction is critical to ensure the health and safety of workers in this important sector of the Mongolian economy.

  17. Occupational lung diseases and the mining industry in Mongolia

    Energy Technology Data Exchange (ETDEWEB)

    Lkhasuren, O.; Takahashi, K.; Dash-Onolt, L. [Health Science University of Mongolia, Ulaanbaatar (Mongolia)

    2007-04-15

    Mining production has accounted for around 50% of the gross industrial product in Mongolia since 1998. Dust-induced chronic bronchitis and pneumoconiosis currently account for the largest relative share (67.8%) of occupational diseases in Mongolia, and cases are increasing annually. In 1967-2004, medically diagnosed cases of occupational diseases in Mongolia numbered 7,600. Of these, 5,154 were confirmed cases of dust-induced chronic bronchitis and pneumoconiosis. Lung diseases and other mining-sector health risks pose major challenges for Mongolia. Gold and coal mines, both formal and informal, contribute significantly to economic growth, but the prevalence of occupational lung diseases is high and access to health care is limited. Rapid implementation of an effective national program of silicosis elimination and pneumoconiosis reduction is critical to ensure the health and safety of workers in this important sector of the Mongolian economy.

  18. The mineral base and productive capacities of metals and non-metals of Kosovo

    Energy Technology Data Exchange (ETDEWEB)

    Rizaj, M.; Beqiri, E.; McBow, I.; O' Brien, E.Z.; Kongoli, F. [University of Prishtina, Prishtina (Kosovo)

    2008-08-15

    All historical periods of Kosovo - Ilirik, Roman, Medieval, Turkish, and former Yugoslavian - are linked with the intensive development of mining and metallurgy. This activity influenced and still is influencing the overall position of Kosovo as a country. For example, according to a 2006 World Bank report as well as other studies, Kosovo has potential lignite resources (geological reserves) of about 1.5 billion tonnes, which are ranked fifth in the world in importance. Other significant Kosovan mineral resources include lead, zinc, gold, silver, bauxite, and uranium, and rare metals accompanying those minerals, including indium, cadmium, thallium, gallium, and bismuth. These rare metals are of particular importance in developing advanced industrial technologies. Kosovo also has reserves of high-quality non-metals, including magnesite, quartz grit, bentonite, argil, talc, and asbestos. No database exists for these non-metal reserves, and further research and studies are needed.

  19. The mineral base and productive capacities of metals and non-metals of Kosovo

    Science.gov (United States)

    Rizaj, M.; Beqiri, E.; McBow, I.; O'Brien, E. Z.; Kongoli, F.

    2008-08-01

    All historical periods of Kosovo—Ilirik, Roman, Medieval, Turkish, and former Yugoslavian—are linked with the intensive development of mining and metallurgy. This activity influenced and still is influencing the overall position of Kosovo as a country. For example, according to a 2006 World Bank report as well as other studies, Kosovo has potential lignite resources (geological reserves) of about 1.5 billion tonnes, which are ranked fifth in the world in importance. Other significant Kosovan mineral resources include lead, zinc, gold, silver, bauxite, and uranium, and rare metals accompanying those minerals, including indium, cadmium, thallium, gallium, and bismuth. These rare metals are of particular importance in developing advanced industrial technologies. Kosovo also has reserves of high-quality non-metals, including magnesite, quartz grit, bentonite, argil, talc, and asbestos. No database exists for these non-metal reserves, and further research and studies are needed.

  20. The South Manchurian Railway Company and the Mining Industry: The Case of the Fushun Coal Mine

    Directory of Open Access Journals (Sweden)

    Tsu-yu Chen

    2015-09-01

    Full Text Available Following the Japanese victory over Czarist Russia in the Russo-Japanese War and the signing of the Treaty of Portsmouth in 1905, the southernmost section of the southern branch of the China Far East Railway (Changchun–Port Arthur was transferred to Japanese control. A new, semi-privately held company, the South Manchuria Railway Company (SMR, Mantetsu, was established with 85.6 percent capitalization by the Japanese government and foreign bonds to operate the railroad and to develop settlements (including highways, public health facilities, educational institutions, and industries (coal mines, harbor facilities, electrical power plants, shale oil plants, chemical plants, and restaurants along its route. SMR nonetheless emphasized railway and mining investment. The centerpiece of its mining interests was the Fushun Coal Mine. Starting in 1917, SMR began to prosper, with most profits coming from its coal mines, and it soon spun off subsidiary companies. In this sense, although the factors that influenced development of the Fushun Coal Mine in each period were different, this development still shows continuity of the business management.

  1. Lean management implementation in mining industries

    Directory of Open Access Journals (Sweden)

    ALTAIR FLAMARION KLIPPEL

    2008-01-01

    Full Text Available Entre las alternativas para asegurar su supervivencia, una particularmente pertinente para las Organizaciones es la innovación. La innovación tiene varias dimensiones entre que es posible incluir: i materia prima; ii producto; iii proceso; iv mercado; v la manera cómo es realizada la administración. Este artículo tiene el objetivo de mostrar la posibilidad de llevar a cabo una nueva manera de dirección en las industrias de extracción de mineral a través del uso integrado de los conceptos desarrollados en la construcción del Sistema de Producción Toyota (SPT / el Sistema de Producción Lean, y los conceptos y técnicas tradicionales que se originan de la Ingeniería Minera y la Ingeniería Industrial. El artículo muestra esta integración en dos situaciones de la minería (fluorita y amatista. Los resultados indican la reducción del costo de la producción y aumento de la productividad y la mejora de la Calidad de Vida de Trabajadores.

  2. [Work conditions and occupational morbidity on mining industry enterprises].

    Science.gov (United States)

    Golovkova, N P; Chebotarev, A G; Leskina, L M

    2006-01-01

    The authors analysed contemporary work conditions on metallurgic mining industry enterprises, revealed intensity of main occupational hazards, summarized results of workplaces certification at these enterprises. The article covers parameters, structure of occupational morbidity among workers engaged into underground winning of ores, ferrous and non-ferrous metallurgy, aluminium plants since 2002 till 2006. Materials on workplaces certification are compared with results of periodic medical examinations in separate industrial entities. The authors outlined major directions of research in occupational medicine for healthy and safe work conditions.

  3. Barriers to green supply chain management in Indian mining industries

    DEFF Research Database (Denmark)

    Muduli, K.; Govindan, Kannan; Barve, A.

    2013-01-01

    industries are increasingly implementing environmental management systems (EMS), cleaner production (CP), and adopting green supply chain management (GSCM) practices. GSCM focuses on a reduction of the adverse impacts of supply chain activities as well as a minimization of energy and material usage....... This study focuses on the mining industry as a case study by which we will identify factors and sub-factors hindering GSCM implementation. A graph theoretic and matrix approach (GTMA) has been used to quantify the adverse impact of these barriers on GSCM implementation. An assessment of the inhibiting...

  4. Physical capacity of rescue personnel in the mining industry

    Directory of Open Access Journals (Sweden)

    Hunt Andrew P

    2008-10-01

    Full Text Available Abstract Background The mining industry has one of the highest occupational rates of serious injury and fatality. Mine staff involved with rescue operations are often required to respond to physically challenging situations. This paper describes the physical attributes of mining rescue personnel. Methods 91 rescue personnel (34 ± 8.6 yrs, 1.79 ± 0.07 m, 90 ± 15.0 kg participating in the Queensland Mines Rescue Challenge completed a series of health-related and rescue-related fitness tasks. Health-related tasks comprised measurements of aerobic capacity (VO2max, abdominal endurance, abdominal strength, flexibility, lower back strength, leg strength, elbow flexion strength, shoulder strength, lower back endurance, and leg endurance. Rescue-related tasks comprised an incremental carry (IC, coal shovel (CS, and a hose drag (HD, completed in this order. Results Cardiovascular (VO2max and muscular endurance was average or below average compared with the general population. Isometric strength did not decline with age. The rescue-related tasks were all extremely demanding with heart rate responses averaging greater than 88% of age predicted maximal heart rates. Heart rate recovery responses were more discriminating than heart rates recorded during the tasks, indicating the hose drag as the most physically demanding of the tasks. Conclusion Relying on actual rescues or mining related work to provide adequate training is generally insufficient to maintain, let alone increase, physical fitness. It is therefore recommended that standards of required physical fitness be developed and mines rescue personnel undergo regularly training (and assessment in order to maintain these standards.

  5. A Study on regeneration cases with industrial Heritage in mining areas of Korea

    Science.gov (United States)

    Cho, Seungyeoun; Ji, Sangwoo; Yim, Giljae

    2017-04-01

    The mining areas have to face urban decline problem in population and aging after its closing. Many mines were shut down due to changes in industrial structure through 20 century. Central and local governments has been trying to solve urban decline of abandoned mine areas by enacting special acts or introducing support programs for decades. In the year of 1995, South Korean government also enacted "Special act on the assistance to the development of abandoned mine areas" to promote the economy of abandoned mine areas that is depressed following the decline of the coal industry and to help balanced regional development and to improve the living standard of the residents in such abandoned mine areas. Local authorities has been trying to revitalize the regional economy by attracting tourism industry under the financial support and deregulation by this special law. With this background, this study analysis 13 regeneration cases which are utilizing the industrial heritage of the abandoned area in S. Korea. Despite the importance of mining, negative images of abandon mine have been engraved due to environmental destruction. Most of abandoned mines were left without any action since its closing. Early stage of abandoned mine area regeneration, such as Sabuk, Munkyong, are focusing on adjacent land not on abandoned mine. Abandoned mines were restored its original state and theme park including hotels, casinos and other tourist facilities were developed on adjacent land. Eco-trails on some granite caves such as Jungsun were opened to the public as natural resources not industrial heritage. The industrial heritage was very restricted to making museums about history of mining industry. However, there has been a significant change in perception toward reusing industrial heritage for urban regeneration in recent years. From the viewpoint of urban regeneration, abandon mine areas and its facilities are receiving attention as important regional assets as industrial heritage to

  6. Recent trends in Cuba's mining and petroleum industries

    Science.gov (United States)

    Wacaster, Susan; Baker, Michael S.; Soto-Viruet, Yadira; Textoris, Steven D.

    2015-01-01

    The Report is Temporarily UnavailableIn response to recent diplomatic developments between Cuba and the United States, the National Minerals Information Center compiled available information on the mineral industries of Cuba. This fact sheet highlights a new map and table that identify mines, mineral processing facilities, and petroleum facilities as well as information on location, operational status, and ownership. It also addresses the current status of known mineral industry projects, historical developments, and trends of the Cuban economy with an emphasis on mineral industries, and the supply and demand for Cuba’s mineral resources.In 2013, Cuba was estimated to be among the world’s top ten producers of cobalt and nickel, which are the country’s leading exports. Cuba’s current crude oil and associated natural gas production from onshore and shallow water coastal reservoirs is approximately 50,000 barrels per day of liquids and about 20,000 barrels per day oil equivalent of natural gas. In 2013, the value of mining and quarrying activities accounted for 0.6 percent of Cuba’s gross domestic product (GDP), compared with 1.4 percent in 2000. The value of production from Cuba’s industrial manufacturing sector increased by 88 percent between 1993 and 2013 whereas the sector’s share in the GDP decreased by about 3 percent during the same time period reflecting economic growth in other sectors of the economy.

  7. Refurbishing technologies of hydraulic actuators applied in mining industry

    Directory of Open Access Journals (Sweden)

    P. Gendarz

    2010-07-01

    Full Text Available Purpose: of this paper: Mainly, future design and manufacturing processes should be oriented to refurbishing and overhaul, such as mining machines, hydraulics, military industry, heavy industry products, etc.. This paper shows method which can improve indirectly profitability also in environment protection area.Design/methodology/approach: Methodology that solves refurbishing and overhaul problem of application, is based on CAD/CAM integration, and predicts possibility to even prepare design for refurbishing. With help of reverse engineering techniques, also exist approach to refurbish elements that has no overhaul documentation prepared before.Findings: Preparation of overhaul documentation for families of constructions, should be computer aided with use of prepared dedicated software. Time need to prepare refurbishing technology, can be considerably reduced.Research limitations/implications: Refurbishing and overhaul in existence cycle of product should have same rights as technology or design processes. Future development of new refurbishing technologies should be prepared in software combined with CAD/CAM modules used in advanced CAE programs.Practical implications: Mining industry after possible initiate refurbishing methods, can extend exploit time of exerted machines. Simultaneously producers of mining machines and equipment, after bringing in design for refurbishing strategy in to production, can enhance economical profits from maintenance and service time prolongation.Originality/value: For last twenty years no development in area of patents were noticed. That came with increase of consumption strategy progressed by produces. Presented method solves issues of materials raise in prices and relatively short time of maintenance and service time period. New workstations in industry can be created with application of the method.

  8. ANALYSIS METHODS OF BANKRUPTCY RISK IN ROMANIAN ENERGY MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    CORICI MARIAN CATALIN

    2016-12-01

    Full Text Available The study is an analysis of bankruptcy risk and assessing the economic performance of the entity in charge of energy mining industry from southwest region. The scientific activity assesses the risk of bankruptcy using score’s method and some indicators witch reflecting the results obtained and elements from organization balance sheet involved in mining and energy which contributes to the stability of the national energy system. Analysis undertaken is focused on the application of the business organization models that allow a comprehensive assessment of the risk of bankruptcy and be an instrument of its forecast. In this study will be highlighted developments bankruptcy risk within the organization through the Altman model and Conan-Holder model in order to show a versatile image on the organization's ability to ensure business continuity

  9. The Empirical Relationship between Mining Industry Development and Environmental Pollution in China.

    Science.gov (United States)

    Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

    2017-03-02

    This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

  10. The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

    Directory of Open Access Journals (Sweden)

    Gerui Li

    2017-03-01

    Full Text Available This study uses a vector autoregression (VAR model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1 because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2 chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3 tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

  11. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth L. Knittel

    2005-05-09

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Kyocera also continued research of the FM systems with the intention of developing commercial markets for a variety of applications. The continued development of FM technology by Kyocera is seen as a direct result of the cooperation established under this funding. Kyocera has a specific interest in the commercial development of the FM technology and have licensed it and have paid

  12. ENVIRONMENTAL INVESTMENTS IN THE MINING INDUSTRY: THE NATURE, CHARACTERISTICS AND TYPES

    Directory of Open Access Journals (Sweden)

    N. Goncharenko

    2015-04-01

    Full Text Available Theoretical basis for environmental investment enterprises in the mining industry was investigated. The essence of the category “environmental investments” was improved. The features to attract environmental investment in the mining sector were analyzed, their classification by expanding classifications were improved. The essence and characteristics of natural, industrial and human capital as an object of environmental investment of mining industry were determined.

  13. Social license to operate: case from brazilian mining industry

    Science.gov (United States)

    Santiago, Ana Lúcia F.; Demajorovic, Jacques; Aledo, Antonio

    2015-04-01

    The approach of the Social License to Operate (SLO) emerges as an important element in academic discussions and business practices related to extractive industries. It appears that in productive activities with great potential to produce economic, social and environmental impacts, conventional approaches based on legal compliance no longer sufficient to legitimize the actions of companies and engagement stakeholders. Studies highlight the need of mining activities receiving a SLO "issued" by companies stakeholders, including society, government, non-governmental organizations, media and communities. However, local communities appears as major stakeholders in governance arrangements, by virtue of its proximity to extractive areas and ability to affect the company's results. Stakeholders with unmet expectations can generate conflicts and risks to the company, the knowledge of these expectations and an awareness of company managers of the importance of Social License to Operate (SLO), can generate strategies and mitigating actions to prevent and or minimize possible conflicts. The concept of SLO arises in engineering extractive industry, when you need to respond to social challenges, beyond the usual environmental challenges, technological and management. According to Franks and Cohen (2012) there is a tendency of engineering sectors, sustainability, environmental, safety and especially in risk mappings, treat the technological issues in a neutral manner, separating the technological research projects of social influences. I want to contribute to the advancement of the debate on stakeholder engagement and adopting as focus on the company's relationship with the community, the aim of this study was to understand how a social project held by one of the largest mining companies in Brazil contributed to the process of SLO. This methodological procedure adopted was a qualitative, descriptive, and exploratory interviews with the communities located in rural areas of direct

  14. Stepped-Frequency Ground-Penetrating Radar for Detection of Small Non-metallic Buried Objects

    DEFF Research Database (Denmark)

    Jakobsen, Kaj Bjarne; Sørensen, Helge Bjarup Dissing; Nymann, Ole

    1997-01-01

    A monostatic amplitude and phase stepped-frequency radar approach have been proposed to detect small non-metallic buried anti-personnel (AP) mines. An M-56 AP-mine with a diameter of 54 mm and height of 40 mm, only, has been successfully detected and located in addition to small metallic mine...

  15. The future of European mining: What should our mining industry learn from the Skouries and Rosia Montana community gold conflicts

    Science.gov (United States)

    Hardy, Liam; Heller, Shaun; Faltyn, Rowan; Stefanaki, Anna; Economidou, Romina; Savin, Irina; Hood, Leo; Conway, Christopher

    2017-04-01

    The popular image of mining portrayed by media and by a majority of public opinion is a dominantly negative one. From worker's rights to environmental damages, disasters such as the Copiapó mine collapse (Chile), the acid mine drainage at Lousal (Portugal) and the Pb contamination of waters around the Tyndrum mines (Scotland) overshadow initiatives like the ICMM. Some companies receive little praise despite creating active community education and investment projects, while others simply build higher barbed wire fences and attempt to weather the protests, budgeting them into mine life assessments. This image problem, combined with the decentralised political segregation of Europe and the increased power of grass-roots protest initiatives (such as Antigold in Greece), has resulted in mining companies joining a long list of industries effected by the 'auto-protest' reaction in face of development, regardless of potential regional and national benefits, there is a pre-existing lack of trust in corporate and government powers to protect community interests. The poor management of existing licences is thus becoming a significant danger to future operations and the wider industry. Here we report on the Rosia Montana dispute (Romania) and the ongoing Skouries conflict (Greece). We then discuss how the European mining industry may need to significantly adapt its exploration and community engagement strategies to avoid future conflicts and, present a recent example of how effective suitably organised community engagement projects can be for local mining initiatives from Southern Portugal.

  16. Optimization of industrial structure: crux of the transition of mining cities

    Institute of Scientific and Technical Information of China (English)

    LI Ping

    2007-01-01

    The rise and development of mining cities in our country take an extremely special status and play an important role in the national economy and social development.However, there are many problems in mining cities and their industrial structure. To realize the transition of mining cities, we must optimize the industrial structure. According to the theory of the optimization of industrial structure, the strategy is to organize regional enterprise groups, develop cluster economy, continuing industry and circular economy, and promote the rationalization of cities and regional industrial structure.

  17. Report on observations and suggestions arising out of a visit to the gold mining industry in South Africa

    CSIR Research Space (South Africa)

    Reed, JJ

    1968-02-01

    Full Text Available Following a visit to the South African mining industry and the Chambers Research Organization, the author has presented a number of observations on various aspects of mining and mining research in the Republic. These observations relate generally...

  18. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Mark J. Rigali

    2001-10-01

    Published mechanical and thermal properties data on a variety of materials was gathered, with focus on materials that have potential with respect to developing wear resistant and damage tolerant composite for mining industry applications. Preliminary core materials of interest include but are not limited to: Diamond, Tungsten Carbide and Cemented Tungsten Carbides, Carbides of Boron, Silicon, Titanium and Aluminum, Diboride of Titanium and Aluminum, Nitrides of Aluminum, Silicon, Titanium, and Boron, Aluminum Oxide, Tungsten, Titanium, Iron, Cobalt and Metal Alloys. Preliminary boundary materials of interest include but are not limited to: W metal, WC-Co, W-Co, WFeNi, and Mo metal and alloys. Several FM test coupons were fabricated with various compositions using the above listed materials. These coupons were consolidated to varying degrees by uniaxial hot pressing, then cut and ground to expose the FM cell structure. One promising system, WC-Co core and WFeNi boundary, was consolidated to 97% of theoretical density, and demonstrates excellent hardness. Data on standard mechanical tests was gathered, and tests will begin on the consolidated test coupons during the upcoming reporting period. The program statements of work for ACR Inc. and its subcontractors, as well as the final contract negotiations, were finalized during the current reporting period. The program start date was February 22nd, 2001. In addition to the current subcontractors, Kennametal Inc., a major manufacturer of cutting tools and wear resistant tooling for the mining industry, expressed considerable interest in ACR's Fibrous Monolith composites for both machine and mining applications. At the request of Kennametal, ARC Inc fabricated and delivered several Fibrous Monolith coupons and components for testing and evaluation in the mining and machine tool applications. Additional samples of Diamond/Tungsten Carbide-6%Cobalt Fibrous Monolith were fabricated and delivered for testing Kennametal

  19. The Economic Impact of Psychological Distress in the Australian Coal Mining Industry.

    Science.gov (United States)

    Ling, Rod; Kelly, Brian; Considine, Robyn; Tynan, Ross; Searles, Andrew; Doran, Christopher M

    2016-05-01

    The aim of this study was to estimate the economic impact of psychological distress among employees of the Australian Coal Mining Industry. Sample data were gathered from 1456 coal mining staff across eight sites in two Australian states. Two measures were taken of work time lost over four weeks due to psychological distress: (1) full-day absences; (2) presenteeism. Lost work time was valued using hourly wages. Sample data was modeled to estimate annual monetary losses for the Australian Coal Mining Industry. For the sample, estimated annual value of time lost due to psychological distress was $4.9 million ($AUS2015) ($0.61 million per mine), and for the Australian Coal Mining Industry, $153.8 million ($AUS2015). Psychological distress is a significant cost for the Australian Coal Mining Industry. Relevant intervention programs are potentially cost-effective.

  20. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Mike L. Fulcher; Kenneth L. Knittel

    2004-06-08

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Field testing provided by partners Superior Rock Bit and Brady Mining and Construction provided insight into the performance of the fabricated materials under actual operational conditions. Additional field testing of cross-cutting technology, the extrusion of hot metals, at Extruded Metals showed the potential for additional market development.

  1. Optimal control of natural resources in mining industry

    Institute of Scientific and Technical Information of China (English)

    Petrov Nikolay; Tanev Angel

    2015-01-01

    The paper focuses on the optimal control of natural resources in mining industry. The purpose is to pro-pose an optimal extraction series of these resources during the lifetime of the Mine’s maintenance. Fol-lowing the proposed optimal control model, a sensitivity analysis has been performed that includes the interest rate impact on the optimal solution. This study shows that the increasing of the interest rate sti-mulates faster extraction of the resources. The discounting factor induces that the resource has to be extracted faster but this effect is counterbalanced by the diminishing returns of the annual cash flow. At higher parameters of‘alpha’ close to one of the power function about 80%from the whole resource will be extracted during the first 4 years of object/mine maintenance. An existence of unique positive root with respect to return of investment has been proposed and proved by two ways: by the ‘method of chords’ and by using specialized software.

  2. Solid-liquid separation in the mining industry

    CERN Document Server

    Concha A , Fernando

    2014-01-01

    This book covers virtually all of the engineering science and technological aspects of separating water from particulate solids in the mining industry. It starts with an introduction to the field of mineral processing and the importance of water in mineral concentrators. The consumption of water in the various stages of concentration is discussed, as is the necessity of recovering the majority of that water for recycling. The book presents the fundamentals under which processes of solid-liquid separation are studied, approaching mixtures of discrete finely divided solid particles in water as a basis for dealing with sedimentation in particulate systems. Suspensions, treated as continuous media, provide the basis of sedimentation, flows through porous media and filtration. The book also considers particle aggregations, and thickening is analyzed in depth. Lastly, two chapters cover the fundamentals and application of rheology and the transport of suspensions.  This work is suitable for researchers and profess...

  3. environmental impact of aggregate mining by crush rock industries ...

    African Journals Online (AJOL)

    2012-07-02

    Jul 2, 2012 ... method concerned with the extraction of non-fuel and non-metal minerals from .... pacity, problems in human relations, and a number of ... sons [19], sleep disturbance on the other hand is con- ..... season. This is expected as the dominant wind system .... Chrysanthus, C. Evaluating Baseline Data for Trace.

  4. Occupational respiratory diseases in the South African mining industry

    Directory of Open Access Journals (Sweden)

    Gill Nelson

    2013-01-01

    Full Text Available Background: Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been cross-sectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. Objective: The aims of this thesis were to describe silicosis trends in gold miners over three decades, and to explore the potential for diamond mine workers to develop asbestos-related diseases and platinum mine workers to develop silicosis. Methods: Mine workers for the three sub-studies were identified from a mine worker autopsy database at the National Institute for Occupational Health. Results: From 1975 to 2007, the proportions of white and black gold mine workers with silicosis increased from 18 to 22% and from 3 to 32% respectively. Cases of diamond and platinum mine workers with asbestos-related diseases and silicosis, respectively, were also identified. Conclusion: The trends in silicosis in gold miners at autopsy clearly demonstrate the failure of the gold mines to adequately control dust and prevent occupational respiratory disease. The two case series of diamond and platinum mine workers contribute to the evidence for the risk of asbestos-related diseases in diamond mine workers and silicosis in platinum mine workers, respectively. The absence of reliable environmental dust measurements and incomplete work history records impedes occupational health research in South Africa because it is difficult to identify and/or validate sources of dust exposure that may be associated with occupational respiratory disease.

  5. It is Imperative for Chinese Enterprises to Change their Investment Model in Overseas Mining Industry

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>By utilizing a mixed economic model,that is,state-owned companies and private companies work together to make overseas investment,complementary advantages can be leveraged to solve various drawbacks existing in the current investment in overseas mining industry.At the 13th China Economic Forum,China Economic Weekly and China Mining

  6. [Morbidity parameters in mining industry workers of Southern Urals].

    Science.gov (United States)

    Askarova, Z F; Askarov, R A

    2009-01-01

    The authors presented parameters of transitory disablement morbidity, occupational morbidity for workers in two mining enterprises (Bashkortostan Republic), calculated integral parameter of disablement.

  7. The problems of attraction investment to the Ukrainian coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Makogon, Y.V. [State University, Donetsk (Ukraine)

    1999-07-01

    This paper discusses the problems which face foreign investment in the Ukranian coal mining industry. It elaborates on the role of the state and regional networks on the economic growth and the attractions to the investors.

  8. Monitoring and evaluation of sustained clinical performance and tuberculosis management in the South African mining industry

    CSIR Research Space (South Africa)

    Murray

    2004-03-01

    Full Text Available Advisory Committee Project Summary : SIM 02-08-02 Project Title: MONITORING AND EVALUATION OF SUSTAINED CLINICAL PERFORMANCE AND TUBERCULOSIS MANAGEMENT IN THE SA MINING INDUSTRY (22 pages) Author(s): Dr Jill Murray Dr Michelle Wong...

  9. [Study of hydrogen cyanide activity in various working environment in gold-mining industry].

    Science.gov (United States)

    Dedkova, L A; Dorogova, V B; Petrov, V F

    2008-01-01

    The study concerned an influence of saline content of liquid phase of crushed ore and presence or absence of solution blending on the process of cyanic hydrogen release in air of working area gold-mining industry.

  10. [Occupational risk and health disorders criteria in metal mining industry workers].

    Science.gov (United States)

    Zheglova, A V

    2009-01-01

    Evaluating occupational risk of health disorders in metal mining industry workers providing various ore extraction modes enabled to reveal early clinical, laboratory and functional markers of occupational and general diseases.

  11. The assessment of functional work capacity in the South African mining industry.

    Science.gov (United States)

    Hofmann, Tia-Mari; Kielblock, Johan

    2007-01-01

    Overall physical work fitness is a prerequisite in numerous industries. Apart from improved productivity, it remains fundamental with regards to the maintenance of good health and safety. To address worker fitness in the mining industry, AngloGold Ashanti and Anglo Platinum Mining Houses developed a Functional Work Capacity (FWC) test battery. The FWC test battery consists of 19 work simulations representing the required functional work capacity to cope with all types of physical work tasks and work environments in the mining industry. This assessment tool is not only used to evaluate injured or medically affected workers for alternative placement but also to ensure that the new employee is placed in a job matching his physical capacity. This paper reviews the design process and application of the FWC test battery in the mining industry.

  12. What is the relationship of medical humanitarian organisations with mining and other extractive industries?

    Directory of Open Access Journals (Sweden)

    Philippe Calain

    Full Text Available Philippe Calain discusses the health and environmental hazards of extractive industries like mining and explores the tensions that arise when medical humanitarian organizations are called to intervene in emergencies involving the extractive sector.

  13. A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment

    OpenAIRE

    Norhidayah M.S.; Nik Mohamed Nik Mohd Zuki; Mansor Muhamad Arifpin; Ismail Ahmad Rasdan

    2016-01-01

    The ergonomics and environment factors have been the core issue for the mining industry for many years, and its profiles are rising. To ensure an ergonomics work environment, it is possible to require specific attention especially in this industries sector. It is becoming increasingly difficult to ignore the essential issue in Malaysia due to lack of ergonomics knowledge and low awareness among the engineers in the mining sector. The focus of this study is to evaluate and validate the physica...

  14. To what degree could responsible mining play a role to prevent human rights violations arising from the industry? : A human rights law perspective

    OpenAIRE

    Nguyen, Mai

    2012-01-01

    The study primarily aims to address the legal consequences of the rise of responsible mining and responsible mining itself to international human rights law in regulating the mining industry. Firstly, the thesis describes the rise of responsible mining in the context of considerable power of the industry and mining companies. Secondly, the thesis explains how international human rights law governs the mining industry and whereabouts responsible mining could be in the system. Thirdly, the t...

  15. Student Privacy and Educational Data Mining: Perspectives from Industry

    Science.gov (United States)

    Sabourin, Jennifer; Kosturko, Lucy; FitzGerald, Clare; McQuiggan, Scott

    2015-01-01

    While the field of educational data mining (EDM) has generated many innovations for improving educational software and student learning, the mining of student data has recently come under a great deal of scrutiny. Many stakeholder groups, including public officials, media outlets, and parents, have voiced concern over the privacy of student data…

  16. IMPROVING PERFORMANCES BY USING COST CONTROLLING IN THE MINING INDUSTRY ENTITIES

    Directory of Open Access Journals (Sweden)

    SORINEL CĂPUŞNEANU

    2016-06-01

    Full Text Available The aim of this article is to highlight the improving performances of entities from mining industry entities by using cost controlling as an important tool of management accounting, applying the target costing method. The survey is based on questions that led investigation made in the Romanian entities from mining industry and based on data a thorough analysis was done for fulfillment of authors’ purpose. The results obtained by applying the target costing method has allowed a very strict cost control, which ultimately led to increased performances of economic entities from mining industry in Romania. The secondary purpose of this article is to try adjusting the target costing method to the specific of entities in the mining industry. According to studies of specialists this method based on target costing calculation is rather unusual in this sector of mining industry and it relies heavily on the activity-based costing method. The article ends with the authors' conclusions on improving the performances of entities from mining industry based on cost controlling and use of mix information obtained through the applied methods

  17. The introduction of precast concrete block paving into the South African coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Michau, P. St.C.; Wilson, D. (Concor Technicrete (Pty). Ltd. (South Africa))

    1991-01-01

    An increasing number of South African mining houses are considering the use of precast concrete blocks for the surfacing of both underground service roads and opencast haulage roads on their mines. This paper presents discussions of the introduction of concrete block paving in the coal mining industry. The first discussion concerns the construction of an access road in an underground mine while the second describes the construction of a trial section of a block pavement road on a large opencast operation. 4 refs., 5 figs., 4 tabs.

  18. New Forces at Work in Mining: Industry View of Critical Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D. J. [Science and Technology Policy Inst., Arlington, VA (United States); LaTourrette, Tom [Science and Technology Policy Inst., Arlington, VA (United States); Bartis, James T. [Science and Technology Policy Inst., Arlington, VA (United States)

    2007-04-01

    RAND has just published a report entitled, "New Forces at Work in Mining: Industry Views of Critical Technologies," by D. J. Peterson, Tom LaTourrette, and James T. Bartis. The report presents the results of a series of in-depth discussions with leading mining industry representatives selected for their prominent position and their ability to think broadly about technology trends. The discussions highlighted the importance of collaborative technology research, development, and implementation strategies and the increasingly critical role of mine personnel in the utilization of new technologies.

  19. Technology, managerial, and policy initiatives for improving environmental performance in small-scale gold mining industry.

    Science.gov (United States)

    Hilson, Gavin; Van der Vorst, Rita

    2002-12-01

    This paper reviews a series of strategies for improving environmental performance in the small-scale gold mining industry. Although conditions vary regionally, few regulations and policies exist specifically for small-scale gold mining activity. Furthermore, because environmental awareness is low in most developing countries, sites typically feature rudimentary technologies and poor management practices. A combination of policy-, managerial- and technology-related initiatives is needed to facilitate environmental improvement in the industry. Following a broad overview of these initiatives, a recommended strategy is put forth for governments keen on improving the environmental conditions of resident small-scale gold mines.

  20. Occupational lung disease in the South African mining industry: research and policy implementation.

    Science.gov (United States)

    Murray, Jill; Davies, Tony; Rees, David

    2011-01-01

    South African miners face an epidemic of occupational lung diseases. Despite a plethora of research on the mining industry, and the gold mining industry in particular, research impact (including disease surveillance) on policy implementation and occupational health systems performance lags. We describe the gold mining environment, and research on silicosis, tuberculosis, HIV and AIDS, and compensation for occupational disease including initiatives to influence policy and thus reduce dust levels and disease. As these have been largely unsuccessful, we identify possible impediments, some common to other low- and middle-income countries, to the translation of research findings and policy initiatives into effective interventions.

  1. Development and application of biotechnologies in the metal mining industry.

    Science.gov (United States)

    Johnson, D Barrie

    2013-11-01

    Metal mining faces a number of significant economic and environmental challenges in the twenty-first century for which established and emerging biotechnologies may, at least in part, provide the answers. Bioprocessing of mineral ores and concentrates is already used in variously engineered formats to extract base (e.g., copper, cobalt, and nickel) and precious (gold and silver) metals in mines throughout the world, though it remains a niche technology. However, current projections of an increasing future need to use low-grade primary metal ores, to reprocess mine wastes, and to develop in situ leaching technologies to extract metals from deep-buried ore bodies, all of which are economically more amenable to bioprocessing than conventional approaches (e.g., pyrometallurgy), would suggest that biomining will become more extensively utilized in the future. Recent research has also shown that bioleaching could be used to process a far wider range of metal ores (e.g., oxidized ores) than has previously been the case. Biotechnologies are also being developed to control mine-related pollution, including securing mine wastes (rocks and tailings) by using "ecological engineering" approaches, and also to remediate and recover metals from waste waters, such as acid mine drainage. This article reviews the current status of biotechnologies within the mining sector and considers how these may be developed and applied in future years.

  2. The mining industry is everywhere - the future of the German mining industry in the industrial and service-rendering society; Bergbau ist ueberall - Die Zukunft des deutschen Bergbaus in der Industrie- und Dienstleistungsgesellschaft

    Energy Technology Data Exchange (ETDEWEB)

    Jakob, K.F. [Wirtschaftsvereinigung Bergbau e.V., Berlin (Germany)

    2003-08-14

    The high-tech mining industry in Germany with its abundant raw materials has a good international reputation. The concept of sustained development is pursued in the mining industry with equal-ranking aims of profitability, safeguarding of supply and environmental compatibility. In addition to standards in technological development the mining industry sets environmental standards also in the export sector. Its diverse services include important contributions to energy supply and feeding of the world's population as well as labour and health protection and recultivation. The Mining Industry Association (WVB) as a liaison agency between industry and politics will also accompany the relevant legislation and the establishment of the boundary conditions in the future. At the same time the international links for the German mining industry abroad and for international raw material activities are being extended. (orig.) [German] Die High-Tech-Industrie Bergbau im rohstoffreichen Deutschland ist im Weltmassstab respektabel. Das Leitbild der nachhaltigen Entwicklung wird im Bergbau mit den Zielen Wirtschaftlichkeit, Versorgungssicherheit und Umweltvertraeglichkeit gleichrangig verfolgt. Neben Standards in der Technologieentwicklung setzt der Bergbau Umweltstandards auch im Export. Zu seinen vielfaeltigen Leistungen zaehlen essentielle Beitraege zur Energieversorgung und zur Ernaehrung der Weltbevoelkerung ebenso wie der Arbeits- und Gesundheitsschutz und die Wiedernutzbarmachung. Die Wirtschaftsvereinigung Bergbau als Verbindungsstelle zwischen Wirtschaft und Politik wird auch in Zukunft die relevante Gesetzgebung und die Gestaltung der Rahmenbedingungen begleiten. Gleichzeitig werden die internationalen Verbindungen fuer den deutschen Auslandsbergbau und fuer internationale Rohstoffaktivitaeten ausgebaut. Verstaerkt bleibt es die Aufgabe der Oeffentlichkeitsarbeit der WVB, die Anliegen des Bergbaus und seine Bedeutung als zuverlaessiger Lieferant von Energierohstoffen

  3. Sustainable waste management in the Indian mining industry.

    Science.gov (United States)

    Deshpande, V P; Shekdar, A V

    2005-08-01

    One of the important sectors that contribute to the national economy is the mining sector. During the mining of minerals and ores, waste materials in the form of overburden are generated. As these are not useful to the mine owners, they may be inappropriately disposed of into the environment, posing serious threat to the environment in the form of land degradation, water and air pollution. The present paper discusses the existing status of waste generation, its characteristics and the disposal methods being adopted in India. Impacts associated with waste disposal practices together with preventive measures for waste disposal are also discussed. Finally, strategies for improvements in existing waste management and for incorporating the same in the overall development plan for the mines are suggested.

  4. Assay and analytical practice in the South African mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Lenahan, W.C.; Murray-Smith, R. de L.

    1986-01-01

    Contains chapters with the following titles: laboratory design; the preparation of mine samples; the furnace room; balances and mass measurement; the fire assay; sampling and the preparation of samples from metallurgical plants; the determination of gold in cyanide solutions; particle size analysis; the analysis of uranium prospecting, mining and extraction plant samples; the assay of gold bullion and some associated methods of analysis, special methods for the assay of complex materials and geological prospecting samples; the analysis of mine air; pH and electrometric measurement; the treatment and analysis of water and effluents; the sample preparation; analysis and testing of coal (and coke); the analysis of miscellaneous mine materials; the determination of base metals in ores and related materials; the determination of platinum group metals; the analysis of cyanide solutions; the determination of sulphur in ores and related materials; statistical control of analytical practice.

  5. Phytoremediation of industrial mines wastewater using water hyacinth.

    Science.gov (United States)

    Saha, Priyanka; Shinde, Omkar; Sarkar, Supriya

    2017-01-02

    The wastewater at Sukinda chromite mines (SCM) area of Orissa (India) showed high levels of toxic hexavalent chromium (Cr VI). Wastewater from chromium-contaminated mines exhibit potential threats for biotic community in the vicinity. The aim of the present investigation is to develop a suitable phytoremediation technology for the effective removal of toxic hexavalent chromium from mines wastewater. A water hyacinth species Eichhornia crassipes was chosen to remediate the problem of Cr (VI) pollution from wastewater. It has been observed that this plant was able to remove 99.5% Cr (VI) of the processed water of SCM in 15 days. This aquatic plant not only removed hexavalent Cr, but is also capable of reducing total dissolved solids (TDS), biological oxygen demand (BOD), chemical oxygen demand (COD), and other elements of water also. Large-scale experiment was also performed using 100 L of water from SCM and the same removal efficiency was achieved.

  6. [Premorbid markers of cardiovascular diseases in mining industry workers].

    Science.gov (United States)

    Ustinova, O Iu; Vlasova, E M; Luzhetskii, k P; Ivashova, Iu A; Belitskaia, V E

    2014-01-01

    Functional studies of cardiovascular system in mine cutting machine operators with 10 years of underground length of service under exposure to occupational hazards (air pollution with sylvinite dust, noise, general and local vibration, increased humidity, absent natural illumination, work hardiness and intensity), helped to establish premorbid markers of cardial diseases--labile arterial hypertension, disordered processes of myocardial excitability, conductivity and automatism, higher thickness of intima-media complex in extracranial branches of brachiocephalic arteries. To decrease cardiovascular morbidity in mine cutting machine operators, the authors recommend additional blood pressure monitoring and ultrasound study of intima-media complex of extracranial brachiocephalic arteries within periodic medical examinations.

  7. West Mining Expanding Into Lead Zinc Smelting Industry

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>West Mining,China’s 2nd largest lead zinc miner(only next to Yunnan Jinding Zinc with an annual lead and zinc output of approx. 180,000 tons in metal content),has been put- ting efforts on the control of resources for years.Additionally,it has recently increased its investment on smelting business by holding shares of Bayanzhuoer Zijin for more zinc smelting asset.West Mining has just com- pleted the construction of its 60,000-ton zinc

  8. Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

    1974-01-01

    The author has identified the following significant results. The mine refuse inventory maps were prepared in response to a need by both the State and the coal industry. The lack of information on the scope of the problem handicapped all people concerned in drafting realistic legislation for a severance tax on coal production to raise funds for restoration of refuse sites. The inventory was conducted rapidly and economically, and demonstrated the benefits which can be derived through remote sensing methods.

  9. A reduction in mining and industrial effluents in the Blesbokspruit ...

    African Journals Online (AJOL)

    2015-10-05

    Oct 5, 2015 ... while the Blesbokspruit may have had a high mineralisation problem, this was not simply an acid mine drainage .... ent reduction in salt levels or ionic concentrations as well as ..... or precipitation of certain heavy metals increase the water pH ..... charged into the wetland (Bowell, 2000; Durand, 2012) – the.

  10. Addressing the cultural complexity of OHS in the Australian mining industry.

    Science.gov (United States)

    Aickin, Christine; Shaw, Andrea; Blewett, Verna; Stiller, Laurie; Cox, Stephen

    2012-01-01

    This paper summarises the findings of the site assessments of ten pilot mine sites involved in a project entitled, Creating a world-leading OHS culture in the NSW Mining Industry which was undertaken for the New South Wales Mine Safety Advisory Council (NSW MSAC). NSW MSAC was established in 1998 in NSW Australia and aims to increase the emphasis on safety and health within the mining industry by reviewing and analyzing safety performance, setting strategic directions, providing advice and developing policy recommendations. The project itself aimed to deliver a self-sustaining method for achieving and monitoring continuous improvement in OHS culture and practice to the NSW mining industry. The pilot sites involved in the project tested a set of self-assessment tools to enable mines to assess and improve their own OHS culture and performance on key elements of an OHS management system. The tools allowed examination of the current OHS culture of the sites. Sites then used a participative planning process to develop an improvement plan. This paper provides summary data only, without identifying the individual sites that were the source of the data.

  11. Research on key techniques of virtual reality applied in mining industry

    Institute of Scientific and Technical Information of China (English)

    LIAO Jun; LU Guo-bin

    2009-01-01

    Based on the applications of virtual reality technology in many fields, introduced the virtual reality technical basic concept, structure type, related technique development, etc., tallied up applications of virtual reality technique in the present mining industry, inquired into core techniques related software and hardware, especially the optimization in the setup of various 3D models technique, and carried out a virtual scene to travel extensively in real-time by stereoscopic manifestation technique and so on. Then it brought forward the solution of virtual reality technique with software and hardware to the mining industry that can satisfy the demand of different aspects and levers. Finally, it show a fine prospect of virtual reality technique applied in the mining industry.

  12. A Survey On Data Mining Techniques In Customer Churn Analysis For Telecom Industry

    Directory of Open Access Journals (Sweden)

    Amal M. Almana

    2014-05-01

    Full Text Available Customer churn prediction in Telecom Industry is a core research topic in recent years. A huge amount of data is generated in Telecom Industry every minute. On the other hand, there is lots of development in data mining techniques. Customer churn has emerged as one of the major issues in Telecom Industry. Telecom research indicates that it is more expensive to gain a new customer than to retain an existing one. In order to retain existing customers, Telecom providers need to know the reasons of churn, which can be realized through the knowledge extracted from Telecom data. This paper surveys the commonly used data mining techniques to identify customer churn patterns. The recent literature in the area of predictive data mining techniques in customer churn behavior is reviewed and a discussion on the future research directions is offered.

  13. Geotechnical characterization of mined clay from Appalachian Ohio: challenges and implications for the clay mining industry.

    Science.gov (United States)

    Moran, Anthony R; Hettiarachchi, Hiroshan

    2011-07-01

    Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL) in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling.

  14. Rate of occupational accidents in the mining industry since 1950--a successful approach to prevention policy.

    Science.gov (United States)

    Breuer, Joachim; Höffer, Eva-Marie; Hummitzsch, Walter

    2002-01-01

    This paper deals with the decrease in the rate of accident insurance claims in the German mining industry over the last five decades. It intends to show that this process is above all the result of a prevention policy where companies and the body responsible for the legal accident insurance in the mining industry, the Bergbau-Berufsgenossenschaft (BBG), work hand in hand. A system like the German accident insurance scheme, combining prevention, rehabilitation, and compensation, enables successful and modern safety and health measures.

  15. Modern environmental and economic approach of mining industry

    Directory of Open Access Journals (Sweden)

    Carsten Drebenstedt

    2013-03-01

    Full Text Available In the article, the need of transition to the rational subsoil use (the alternative mining approach is proved, which unlike general one supposes the increasing of extraction rate of valuable components in the deposit and multiple use of raw materials, the maximizing recycling, the decreasing of land occupation, the increasing of the development period of deposit at some income decrease up to the moderate level, which is enough to provide the attraction for investors. The multicriteriality is considered as the crucial principle of rational subsoil use at taking management decisions, i.e. the considering of ecological, economic and social targets, aimed at receiving moderate profit at proper social and environmental standards. The graphic representation of models of the general mining approach and the alternative one allows to emphasize the specified advantages of transition to rational subsoil resources development and reflect them in design equation. In the paper, three performance strategies providing the implementation of the alternative approach are offered: full-field development, application ecologically and economically effective systems and the development processes, consideration of reclamation and minimization of long term environmental effects of mining

  16. Financial Incentives to Restructure Coal Mining Industry. Comparative Case Study Romania and State of Michigan, U.S.

    Directory of Open Access Journals (Sweden)

    Roger HAMLIN

    2006-10-01

    Full Text Available Former coal mining sites have always raised environmental and economic challenges for the areas where they were located, especially for those communities that were highly dependent on the coal mining industry. The present paper will explore the factors leading to the decline of coal mining industry in Romania and State of Michigan, U.S., the social, economic and environmental impact that occurred after closing coal extractions and the approaches that the two states took to reconstruct the economy of the former mining areas. The paper attempts to make recommendations of financial incentives that can be used to foster the economic redevelopment of former coal mining sites in Romania.

  17. Ergonomics of mining machinery and transport in the South African mining industry.

    CSIR Research Space (South Africa)

    Schutte, PC

    2003-03-01

    Full Text Available this background, a study was conducted to assess the ergonomics of a number of mining machines and transport systems to identify the ergonomics-related hazards that could impact on the operators’ ability to work safely and efficiently....

  18. Industry Response to the Challenge of Sustainability: The Case of the Canadian Nonferrous Mining Sector

    Science.gov (United States)

    Sánchez

    1998-07-01

    / The paper investigates how the Canadian nonferrous sector is tackling the challenge of sustainable development. Although there is no consensus as to what sustainable development means in practice for management in the sector, at least three dimensions must be taken into account: (1) metals are recyclable, the availability of this resource is not a concern for the foreseeable future; (2) the need to minimize environmental impacts of metals exploration, extraction, transformation, consumption, and recycling; and (3) production activities should not be socially or culturally disruptive. The nonferrous mining industry faces several environmental problems. Some of the most significant are acid mine drainage, sulfur emissions, recycling, and metals toxicity. The industry has developed a number of responses to address these specific concerns as well as other more general challenges. Six strategies are described and analyzed: (1) research and development, (2) an effort of consensus building among stakeholders known as the Whitehorse Mining Initiative, (3) international networking, (4) active involvement in the development of environmental management standards, (5) management reorganization and (6) voluntary agreements. The importance of external factors in the shaping of corporate environmental management practices is discussed, in particular the role of government. Progress has been achieved in three areas: (1) managerial practices and organization, (2) reducing the impacts of ongoing operations and (3) minimizing future liabilities, but two significant fields of conflict remain, namely mining in wilderness areas and projects on aboriginal lands.KEY WORDS: Canada; Environmental management; Minerals industry; Nonferrous metals; Sustainable development; Whitehorse Mining Initiative

  19. Mine Clearance Industry: Background, Geography, Funding, Analysis and Future Projections

    Science.gov (United States)

    2007-12-01

    1,868 3,132 - 3,096 3,844 3,700 3,500 6,100 6,823 5,960 47,593 Argentina - - - - - - - 550 - - - - 750 Armenia 1,148 - - - - 1,410 850 4,441 250...El Salvador currently operates in San Salvador and La Libertad , and Usulután (May 2006).752 In 2006, LSN assisted 369 mine/ERW survivors, including...Research and Technology Argentina , Australia, Austria, Brazil, Chile, China, Colombia, Denmark, Finland, France, Germany, India, Indonesia, Italy

  20. The minerals industry of Colombia. Mining of coal; Die Rohstoffwirtschaft Kolumbiens. Der Bergbau auf Kohle

    Energy Technology Data Exchange (ETDEWEB)

    Benthaus, F.C. [Lausitzer und Mitteldeutsche Bergbau-Verwaltungsgesellschaft (LMBV), Berlin (Germany); Hermann, J. [DMT-Montan Consulting GmbH, Essen (Germany); Schmidt-Thome, M. [Bundesanstalt fuer Geowissenschaften und Rohstoffe (BGR), Hannover (Germany)

    2001-09-01

    Colombia's topography in the Northwest of Latin America is characterised by the Andes-Cordillera. At the slopes of these mountains, coal deposits formed during the Cretaceous and Tertiary which were tectonically stressed as a result of the Andean orogeny. Colombia's hard coal reserves coming to approximately 22 billion t SKE (hard coal equivalent) are the largest in Latin America. More than 6.5 billion t of it are proven mineral reserves. In 2000, 38 Mt of steam and pulverised injection coal with low sulphur and ash content were extracted, 34 Mt of were predominantly exported to Europe. Since 1985, large opencast mines with shovel and truck are operated at the Caribbean coast as well as underground mines with room and pillar are operated by national and international consortia. The transportation to the ports is hereby the bottleneck and increases the extraction costs strongly. Small- and medium-scale mines in the inland produce for the local markets (power generation, industrial heating). The low technical equipment and simple safety standards enable an economic mining mostly in drift mines. Difficult topographic conditions badly influencing the road transportation and the neglected railway system raise the prices of minerals considerably. Small-scale operations (for example family type or artisanal) for mining minerals near to the surface are out of state influence and control. Apart from several safety problems caused by Guerrilla groups, Colombia meets all requirements to become one of the important mining countries in the world. (orig.)

  1. [Occupational fitness of workers in coal mining industry].

    Science.gov (United States)

    Ismailova, A A; Musina, A A

    2006-01-01

    Specified criteria of occupational fitness are adequate for optimizing material expenses within the system "human-machine" and during occupational training for work in extreme conditions of coal industry.

  2. Transport and handling of construction materials in the hard coal mining industry and tunnel construction

    Energy Technology Data Exchange (ETDEWEB)

    Bartsch, Stephan [Olko-Maschinentechnik GmbH, Olfen (Germany)

    2008-08-21

    In the German hard coal mining industry construction materials with the most diverse compositions are required for various applications. The largest proportion of the materials is required for the construction of roadside packs and for the backfilling of roadways because of the ever increasing depths and the resulting rock mechanical problems. Over the last 30 years handling, transport and processing systems have been developed to cope with these quantities of materials and to avoid further loads on the shaft hoisting installation. Nowadays these systems are standardised and are characterised by mobility, flexibility, small space requirement and the latest control engineering. This applies in particular to pneumatic and hydraulic transport and distribution of the construction materials. In future all mines will monitor and control all installations above and below ground from a central control room. The methods developed in the mining industry are also successfully used in tunnel and underground railway construction. (orig.)

  3. Socio-Economic and Environmental Challenges of Mining Industry in the Komi Republic

    Directory of Open Access Journals (Sweden)

    Irina Grigor’evna Burtseva

    2015-07-01

    Full Text Available Mineral resources of the Komi Republic and the trends and dynamics of their development determine to a great degree the level of the regions’ economic development. The Republic has significant reserves of oil, gas, coal, aluminum, chromium, manganese, titanium, rare metals, gold, barite, fluorite, and quartz raw materials. However, the region’s mining industry is still in the process of formation, this fact makes it possible to foresee and handle major social and environmental issues that accompany mining activities. The analysis of global trends in the implementation of mining projects substantiates the necessity to build a positive reputation of mining companies for ensuring stable production and for solving social and economic problems of territories. The paper also determines staffing requirements of prospective mining enterprises and possible social risks. The authors substantiate the necessity to redistribute taxes and payments in favor of the areas where mining companies operate, and they propose ways of attracting investment in mining projects on the stage of exploration with the help of a flexible fiscal policy. The main environmental problems of perspective objects of mining complex development can include the concentration of hazardous emissions, discharges and waste and the aggravation of environmental impact. The transformation of living organisms is moving toward the reduction of species diversity, simplification and changing community structure due to the disappearance of sensitive and rare species. The assessment of environmental impact intensity, based on the point estimation of the correlation between existing anthropogenic load and environmental resistance, has shown that the levels are medium and high. Taking into consideration the increased anthropogenic load, it is necessary to determine restrictions of nature management during pre-investment stage, to set out in the license the overall admissible amount of land

  4. Role of behavioural factors in green supply chain management implementation in Indian mining industries

    DEFF Research Database (Denmark)

    Muduli, Kamalakanta; Govindan, Kannan; Barve, Akhilesh

    2013-01-01

    Green supply chain management (GSCM) integrates ecological concepts with those of supply chain management in order to minimize energy and material usage and to reduce adverse impacts of supply chain activities on the environment. GSCM implementation in mining industries depends largely upon certain...

  5. A case in support of implementing innovative bio-processes in the metal mining industry

    NARCIS (Netherlands)

    Sanchez Andrea, I.; Stams, A.J.M.; Weijma, J.; Gonzalez Contreras, P.A.; Dijkman, H.; Rozendal, R.A.; Johnson, D.B.

    2016-01-01

    The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements.

  6. Biological recovery of metals, sulfur and water in the mining and metallurgical industry

    NARCIS (Netherlands)

    Weijma, J.; Copini, C.F.M.; Buisman, C.J.N.; Schultz, C.E.

    2002-01-01

    Metals of particular interest in acid mine drainage and industrial wastewaters include copper, zinc, cadmium, arsenic, manganese, aluminum, lead, nickel, silver, mercury, chromium, uranium and iron, in a concentration that can range from 106 to 102 g/l. The composition of such wastewater reflects th

  7. A case in support of implementing innovative bio-processes in the metal mining industry

    NARCIS (Netherlands)

    Sanchez Andrea, I.; Stams, A.J.M.; Weijma, J.; Gonzalez Contreras, P.A.; Dijkman, H.; Rozendal, R.A.; Johnson, D.B.

    2016-01-01

    The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements. Typicall

  8. Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

    Directory of Open Access Journals (Sweden)

    Yang Guan

    2014-07-01

    Full Text Available Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1 Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2 The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3 The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4 The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies.

  9. Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Ju, Meiting

    2014-01-01

    Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China) as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1) Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2) The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3) The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4) The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies. PMID:25032743

  10. Effective Implementation of Online Learning: A Case Study of the Queensland Mining Industry.

    Science.gov (United States)

    Newton, Diane; Hase, Stewart; Ellis, Allan

    2002-01-01

    Interviews with key stakeholders in the mining industry in Queensland, Australia, identified six factors that are important in the effective implementation of online learning: external influences, organizational culture, organizational structures, training environment, learners' needs, and the learning environment. (Contains 54 references.) (JOW)

  11. A case in support of implementing innovative bio-processes in the metal mining industry.

    Science.gov (United States)

    Sánchez-Andrea, Irene; Stams, Alfons J M; Weijma, Jan; Gonzalez Contreras, Paula; Dijkman, Henk; Rozendal, Rene A; Johnson, D Barrie

    2016-06-01

    The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements. Typically about 99% of solid material hauled to, and ground at, the land surface currently ends up as waste (rock dumps and mineral tailings). Exposure of these to air and water frequently leads to the formation of acidic, metal-contaminated run-off waters, referred to as acid mine drainage, which constitutes a severe threat to the environment. Formation of acid drainage is a natural phenomenon involving various species of lithotrophic (literally 'rock-eating') bacteria and archaea, which oxidize reduced forms of iron and/or sulfur. However, other microorganisms that reduce inorganic sulfur compounds can essentially reverse this process. These microorganisms can be applied on industrial scale to precipitate metals from industrial mineral leachates and acid mine drainage streams, resulting in a net improvement in metal recovery, while minimizing the amounts of leachable metals to the tailings storage dams. Here, we advocate that more extensive exploitation of microorganisms in metal mining operations could be an important way to green up the industry, reducing environmental risks and improving the efficiency and the economy of metal recovery.

  12. [Health of workers engaged into mining industry in Siberia and Far North].

    Science.gov (United States)

    Rukavishnikov, V S; Shaiakhmetov, S F; Pankov, V A; Kolycheva, I V

    2004-01-01

    Based on longstanding analysis of transitory disablement morbidity among workers engaged into mining industry of Siberia and Far North, the authors defined factors and conditions contributing to health deterioration among these workers. These factors and conditions are severe climate conditions, long exposure to hazards, bad health care, ineffective methods of treatment and prophylaxis.

  13. Appreciation of the potential for robots and telechirs in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Tregelles, P.G.

    1982-08-01

    This article defines robots and telechirs, then considers the objectives the mining industry should be working towards, and comments on the new technologies which are becoming available. The direction that NCB developments are taking is discussed and finally the possible application of the robot, and the telechir as an aid to those ends is considered.

  14. Biological recovery of metals, sulfur and water in the mining and metallurgical industry

    NARCIS (Netherlands)

    Weijma, J.; Copini, C.F.M.; Buisman, C.J.N.; Schultz, C.E.

    2002-01-01

    Metals of particular interest in acid mine drainage and industrial wastewaters include copper, zinc, cadmium, arsenic, manganese, aluminum, lead, nickel, silver, mercury, chromium, uranium and iron, in a concentration that can range from 106 to 102 g/l. The composition of such wastewater reflects

  15. Role of behavioural factors in green supply chain management implementation in Indian mining industries

    DEFF Research Database (Denmark)

    Muduli, Kamalakanta; Govindan, Kannan; Barve, Akhilesh

    2013-01-01

    Green supply chain management (GSCM) integrates ecological concepts with those of supply chain management in order to minimize energy and material usage and to reduce adverse impacts of supply chain activities on the environment. GSCM implementation in mining industries depends largely upon certa...

  16. The fourteenth international symposium on mine planning and equipment selection (MPES) 2005 and the fifth international conference on computer applications in the minerals industry (CAMI) 2005

    Energy Technology Data Exchange (ETDEWEB)

    Singhal, R.J.; Fytas, K.; Chiwetelu, C. (eds.)

    2005-07-01

    The proceedings contain 122 papers on mine planning, equipment selection, and computer applications in the mining and minerals industry. Presentations cover surface and underground mining, development, coal mining, oil sands mining, risk analysis, productivity, computer modelling, and waste treatment. Selected papers have been abstracted for the Coal Abstracts database.

  17. Rheology of slurries and environmental impacts in the mining industry.

    Science.gov (United States)

    Boger, David V

    2013-01-01

    The world's resource industries are the largest producers of waste. Much of this waste is produced as a fine particle slurry, which is pumped to a storage area, generally at a low concentration, where it behaves like a Newtonian fluid. Simply removing, reusing, and recycling water from the slurry represents a step toward a more sustainable practice in this industry. As the concentration of such a slurry is increased as a result of dewatering, the materials exhibit non-Newtonian behavior, which is characterized by shear thinning, a yield stress, and in some instances thixotropic behavior. Such high-concentration, nonideal (dirty) suspensions in the resource industries have meant that new rheological methods and techniques have been needed to measure and interpret the basic flow properties. Also, some older empirical techniques have needed to be modified and interpreted in a more fundamental way so that the results could be used in design. This article reviews these techniques and illustrates how the industry itself has motivated their development. Understanding and exploiting this rheology has resulted in dramatic improvement in the waste-disposal strategy for some industries, but many have failed to embrace the available technology. The reasons for this are discussed. The article concludes that a greater positive change in waste-management practice will occur in the future, motivated by several factors, including public perception, tighter regulation, and perhaps even commonsense life cycle accounting.

  18. Research on risk dodges of industrial structure readjustment in mining industry city

    Institute of Scientific and Technical Information of China (English)

    PENG Lian-hui; LI Fang-wei; LI Nai-wen

    2008-01-01

    It was mainly research on the causes,manifestations,and risk dodges of the industry risk selection,industry structure risk during the readjustment of the industrial structure and the establishment of the early-warning model of risk aversion.

  19. Research on risk dodges of industrial structure readjustment in mining industry city

    Institute of Scientific and Technical Information of China (English)

    PENG Lian-hui; LI Fang-wei; LI Nai-wen

    2008-01-01

    It was mainly research on the causes, manifestations, and risk dodges of the industry risk selection, industry structure risk during the readjustment of the industrial structure and the establishment of the early-warning model of risk aversion.

  20. In plant partial noise enclosures for the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Kinevy, P.T.

    1993-10-01

    The Physical and Toxic Agents Division of the Mine Safety and Health Administration`s Pittsburgh Safety and Health Technology Center has conducted three joint noise control demonstrations at dry milling operations. These demonstrations were conducted on a rod mill, a roller mill, and a ball mill, in order to survey a representative sample of the more commonly utilized types of milling equipment. The noise control concept that was demonstrated involved the construction of partial enclosures surrounding the mills and then adding acoustical materials within the enclosures to absorb the build up of acoustical energy. The results of this work illustrate the feasibility of this concept, the physical principle of creating an acoustical shadow, and the ability to closely predict the amount of absorptive material required to reduce the noise levels so as to comply with the Code of Federal Regulations (CFR), Title 30.

  1. Corporate Governance and Environmental Disclosure in the Indonesian Mining Industry

    Directory of Open Access Journals (Sweden)

    Terri Trireksani

    2016-04-01

    Full Text Available Sustainability and corporate governance issues are now considered to be important and integral aspects of company performance. Both have established themselves as well-studied topics in the organisational and accountability areas. While there has been a growing interest to study the relationship between these two areas, research publication in this topic is still mainly focused on the Western societies. This study focuses on the corporate governance and sustainability disclosure practices in one of the emerging economies, Indonesia, and assesses the relationships between corporate governance variables and the extent of environmental disclosures made by the mining companies listed in the Indonesia Stock Exchange (IDX in their annual reports. The main findings of this study show that the extent of environmental disclosure made by these companies was moderate, and that there is a significant positive relationship between the size of board of directors and the extent of environmental disclosure.

  2. Uranium mining industry views on ICRP statement on radon.

    Science.gov (United States)

    Takala, J

    2012-01-01

    In 2009, the International Commission on Radiological Protection issued a statement on radon which stated that the dose conversion factor for radon progeny would likely double, and the calculation of risk from radon should move to a dosimetric approach, rather than the longstanding epidemiological approach. Through the World Nuclear Association, whose members represent over 90% of the world's uranium production, industry has been examining this issue with a goal of offering expertise and knowledge to assist with the practical implementation of these evolutionary changes to evaluating the risk from radon progeny. Industry supports the continuing use of the most current epidemiological data as a basis for risk calculation, but believes that further examination of these results is needed to better understand the level of conservatism in the potential epidemiological-based risk models. With regard to adoption of the dosimetric approach, industry believes that further work is needed before this is a practical option. In particular, this work should include a clear demonstration of the validation of the dosimetric model which includes how smoking is handled, the establishment of a practical measurement protocol, and the collection of relevant data for modern workplaces. Industry is actively working to address the latter two items.

  3. Size of Non-Metallic Inclusions in High-Grade Medium Carbon Steel

    OpenAIRE

    Lipiński T.; Wach A.

    2014-01-01

    Non-metallic inclusions found in steel can affect its performance characteristics. Their impact depends not only on their quality, but also, among others, on their size and distribution in the steel volume. The literature mainly describes the results of tests on hard steels, particularly bearing steels. The amount of non-metallic inclusions found in steel with a medium carbon content melted under industrial conditions is rarely presented in the literature. The tested steel was melted in an el...

  4. A comprehensive assessment of exposures to respirable dust and silica in the taconite mining industry.

    Science.gov (United States)

    Hwang, Jooyeon; Ramachandran, Gurumurthy; Raynor, Peter C; Alexander, Bruce H; Mandel, Jeffrey H

    2017-05-01

    This study assessed the present-day levels (year 2010-2011) of exposure to respirable dust (RD) and respirable silica (RS) in taconite mines and evaluated how the mining process influences exposure concentrations. Personal samples (n = 679) were collected to assess exposure levels of workers to RD and RS at six mines in the Mesabi Iron Range of Minnesota. The RD and RS concentrations were measured using the National Institute for Occupational Safety and Health (NIOSH) 0600 and NIOSH 7500, respectively. Between-mine, between-SEG (similar exposure groups), within-SEG, and within-worker components of variability for RD and RS exposures were estimated using a two- or three-way nested random-effects ANOVA model. The majority of RD concentrations across all mines were below the Mine Safety and Health Administration (MSHA) Permissible Exposure Limit (PEL). The highest concentrations of RD were often observed in either the Pelletizing or Crushing departments, which are inherently dusty operations. With a few exceptions, the concentrations of RS in the crushing and concentrating processes were higher than those in the other mining processes, as well as higher than the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV) for RS. The magnetic separation and flotation processes in the concentrating department reduced the levels of RS significantly, and lowered the percentage of quartz in RD in the pelletizing department. There was little variability among the six mines or between the two mineralogically distinct zones for either RD or RS exposures. The between-SEG variability for RS did not differ substantially across most of the mines and was a major component of exposure variance. The within-SEG (or between-worker) variance component was typically the smallest because in many instances one worker from a SEG within a mine was monitored multiple times. Some of these findings were affected by the degree of censoring in each SEG and mine

  5. Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

    2015-01-01

    Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

  6. Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas.

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

    2015-11-01

    Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area.

  7. Hazards identified and the need for health risk assessment in the South African mining industry.

    Science.gov (United States)

    Utembe, W; Faustman, E M; Matatiele, P; Gulumian, M

    2015-12-01

    Although mining plays a prominent role in the economy of South Africa, it is associated with many chemical hazards. Exposure to dust from mining can lead to many pathological effects depending on mineralogical composition, size, shape and levels and duration of exposure. Mining and processing of minerals also result in occupational exposure to toxic substances such as platinum, chromium, vanadium, manganese, mercury, cyanide and diesel particulate. South Africa has set occupational exposure limits (OELs) for some hazards, but mine workers are still at a risk. Since the hazard posed by a mineral depends on its physiochemical properties, it is recommended that South Africa should not simply adopt OELs from other countries but rather set her own standards based on local toxicity studies. The limits should take into account the issue of mixtures to which workers could be exposed as well as the health status of the workers. The mining industry is also a source of contamination of the environment, due inter alia to the large areas of tailings dams and dumps left behind. Therefore, there is need to develop guidelines for safe land-uses of contaminated lands after mine closure.

  8. The internationalization of Chinese industries : Overseas acquisition activity in Chinese mining and manufacturing industries

    NARCIS (Netherlands)

    Zhou, C.; van Witteloostuijn, A.; Zhang, J.

    2014-01-01

    This study examines how industrial characteristics at home affect Chinese overseas acquisition activities from an industry-level resource-based view. Analyzing data on 512 Chinese overseas acquisition deals across 36 industries in 60 countries over 2003–2008, we find that: (1) firms in industries wi

  9. Mechatronics in the mining industrie. With (development) method towards success; Mechatronik im Bergbau. Mit (Entwicklungs-) Methode zum Erfolg

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, Thorsten; Bruckmann, Tobias [Mercatronics GmbH, Duisburg (Germany)

    2009-10-01

    Germany is a high-wage country. Hence the internationally competitive extraction of raw materials in Germany can only be ensured by highly efficient working processes. Tackling the associated extreme requirements on road-driving, coal winning and transport equipment has resulted in the German mining industry and its suppliers achieving the role of an international leader in technology. To safeguard this position also in the future the successful mechanisation will now be followed by the mechatronisation in the mining industry. Efficiency will be increased by (partial) automation and assistance systems. This contribution is a first step towards a series of articles, which explain the principles of mechatronic development methods in the mining industry and will make the development engineers in the mines aware of the high potential of mechatronics in the mining industry. (orig.)

  10. Hot particles in industrial waste and mining tailings

    CERN Document Server

    Selchau-Hansen, K; Freyer, K; Treutler, C; Enge, W

    1999-01-01

    Industrial waste was studied concerning its radioactive pollution. Using known properties of the solid state nuclear track detector CR-39 we found among a high concentration of more or less homogeneously distributed single alpha-tracks discrete spots of very high enrichments of alpha-particles created by so called hot particles. We will report about the alpha-activity, the concentration of hot particles and about their ability to be air borne.

  11. Escape chambers in the German coal mining industry. Fluchtkammern im deutschen Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Kock, F.J.; Langer, G. (Bergbau-Forschung G.m.b.H. - Forschungsinstitut des Steinkohlenbergbauvereins, Essen (Germany, F.R.). Hauptstelle fuer das Grubenrettungswesen); Velsen-Zerweck, R. von; Boettcher, K. (Bergbau AG Westfalen, Dortmund (Germany, F.R.). Hauptabteilung Sicherheitswesen)

    1989-08-17

    Escape chambers are used in special cases in German mines for self-rescue of the work force. On the basis of the newly laid down requirements concerning escape chambers a specification for mobile escape chambers was drawn up. The Safety Department of Bergbau AG Westfalen purchased two escape chambers of different manufacturers for 10 persons in each case, which are curently being tested at collieries of Bergbau AG Westfalen. The German coal mining industry thus has escape chambers at its disposal to make self-rescue of the work force even safer in the event of difficult and long escape routes. (orig.).

  12. Impact of Urbanization and Industrialization upon Surface Water Quality: A Pilot Study of Panzhihua Mining Town

    Institute of Scientific and Technical Information of China (English)

    Yanguo Teng; Jie Yang; Rui Zuo; Jinsheng Wang

    2011-01-01

    In order to investigate the impact of urbanization and industrialization on surface water quality,a pilot study of Panzhihua (攀枝花) mining town was carried out.The urbanization of Panzhihua region was dominated by industry development and population growth.The level of urbanization showed that it was 18.44% in 1965,and reached 45.99% in 1983.Then,it reached 53.71% in 2005,so the urbanization process was very rapid in Panzhihua region.In the process of industrialization,the level of industrialization was fluctuated at around 70% from 1965 to 2005,which was influenced by mining,extracting,and smelting production.In the processes of urbanization,population growth caused an increase in life pollution sources,and an amount of effluents bearing coliform,COD (chemical oxygen demand),NH4+-N,and BOD5 (five-day biological oxygen demand) were released into Jinsha (金沙) River,which could cause decline in the surface water quality.While in the processes of industrialization (especially industrial scale expansion),more effluent bearing heavy metals could cause degradation of surface water quality.Thus,the measures,such as adjusting industry structure,optimizing the cleaning technology,and controlling pollution sources,should be enhanced to alleviate the current state of water quality exacerbation.

  13. Testing theOdour Quality of Non-Metallic Materials

    Directory of Open Access Journals (Sweden)

    AVIJIT SINGH GANGWAR

    2014-10-01

    Full Text Available This report has been compiled on the completion of 3 week summer training at ICAT. It discusses about a very necessary and least popular part of the Automotive Industry i.e. Testing and Certification. It discusses about one of the government notified Testing body ICAT which is one of just 6 such organisations in India.This report deals with the odour quality testing of non-metallic materials that are used for automobile compartment and parts associated with the compartment.

  14. Radon concentrations in abandoned mines, Cumbria, UK: safety implications for industrial archaeologists

    Directory of Open Access Journals (Sweden)

    G. Gillmore

    2011-05-01

    Full Text Available This paper presents a number of surveys performed in a geographical area of the UK, part of which until recently was considered low radon risk. The Cumbrian region was identified by the Building Research Establishment (BRE in its 1999 guide as an area without a significant radon problem in the built environment. The geology of the region, which includes the Northern Pennine Orefield is varied, but consists of granites, andesites, tuffs, carbonates, sandstones and shales. Mineralisation has taken place (mostly lead and copper ores primarily along fault and fracture zones, one example being Copper Valley, northwest of Coniston village. This work quantifies the risk of exposure to radon in a number of abandoned mine environments. High radon levels, up to 28 589 Bq m−3, have been measured in parts of one mine. This study demonstrates that industrial archaeologists (such as the Cumbrian Amenity Trust Mining History Society or CATMHS members and explorers of abandoned mines can be at risk from radon exposure and it proposes a management scheme to allow industrial archaeologists to continue exploration whilst minimising the risk to health from radon.

  15. Mining industry enters a new era of AIDS prevention. Eye witness: South Africa.

    Science.gov (United States)

    Heywood, M

    1996-06-01

    Miners in South Africa are now more at risk of contracting human immunodeficiency virus (HIV) than of being in a mining accident. Some epidemiologists predict that the mines could be experiencing 12,000-40,000 deaths related to acquired immunodeficiency syndrome (AIDS) by 2010. In 1986, HIV infection among mineworkers was 1/3500. Gencor medical personnel now estimate that 20% of the company's employees are HIV-positive and that 30 workers are dying of AIDS each month. In August 1995, the Chamber of Mines, the World Bank, and the World Health Organization (WHO) held a seminar to discuss the potential impact of the epidemic; it was followed by a workshop, "Research Needs and Priorities for the Management of HIV/AIDS Transmission in the Mining Industry," which was organized by the Epidemiology Unit in Johannesburg. Although the seminar invited no people with HIV, mineworkers, or government representatives, the workshop did; however, no representatives of the National Union of Mineworkers (NUM), or the Chamber of Mines, came. In spite of this, a new, holistic approach to HIV-prevention is emerging in the mining sector. A decade of education has not changed risk behaviors, so more emphasis will be placed on outreach programs to the communities, including the prostitutes, with which the miners interact, and on treatment of sexually transmitted diseases (STDs). The mining sector is in a unique position to fight HIV because it already has an extensive medical infrastructure with the capacity to treat STDs effectively, a unionized workforce to provide a pool of peer educators, and recruitment agencies to extend HIV-prevention into rural areas. Obstacles to effective HIV/AIDS education include discrimination (Workers are tested for HIV without consent, and dismissed, if found to be positive, regardless of union agreements.); a psychological factor that is related to underground work and produces recklessness; poor living conditions; and illiteracy. Many myths remain about

  16. Open-cut coal mining in Australia's Hunter Valley: Sustainability and the industry's economic, ecological and social implications

    Directory of Open Access Journals (Sweden)

    Drew Cottle

    2014-09-01

    Full Text Available This article questions the sustainability of open-cut coal mining in the Hunter Valley region of Australia. The issue of sustainability is examined in relation to the economic, ecological and social implications of the Hunter Valley’s open-cut coal mining industry. The article demonstrates that critical social and ecological ramifications have been overshadowed by the open-cut coal mining industry’s importance to the economy of the Hunter region and of New South Wales.

  17. Waste production and disposal in mining, milling, and metallurgical industries. (Production de matieres steriles et evacuation de celles-ci dans les mines, le moulin et les industries metallurgiques)

    National Research Council Canada - National Science Library

    Williams, R. E

    ... be implemented when it becomes effective in July 1977. Three succeeding chapters discuss the general nature of gaseous, liquid, and solid wastes generated by mining, milling, and metallurgical industries...

  18. 菲律宾采矿业期待腾飞%Philippines's Mining Industry Awaiting Prosperity

    Institute of Scientific and Technical Information of China (English)

    刘静

    2005-01-01

    Because of its favorable location, the Philippines possess sufficient natural mineral materials according to its relatively small territory. The Philippines used to be one of the top 10 world producers of copper, gold, nickel and chromites in the 1980s. Since then, however, its mining industry has steadily deteriorated owing to some reasons. This essay probes into the process of its development, its drawbacks and its prospect.

  19. Mining space and industrial heritage in Mexico: the mineral from Tlalpujahua [Michoacán state

    OpenAIRE

    Uribe Salas, José Alfredo

    2014-01-01

    This paper deals with the historical dimension of the economic and social space of Tlalpujahua and El Oro Mining District from the perspective of the Industrial Heritage. The exploration and exploitation in search for precious minerals along the sixteenth to the twentieth centuries articulated a culture of wage labour and facilitated the circulation of new knowledge, technical expertise and an impressive technological innovation in the late nineteenth and early twentieth centuries. With the d...

  20. Emotion work and well-being of human resource personnel in a mining industry / T. Beyneveldt

    OpenAIRE

    Beyneveldt, Tanya

    2009-01-01

    Human Resource personnel as part of their daily jobs provide a service to other employees within a mining industry. These service workers may experience dissonance between their actual feelings and the feelings they are expected to display. For these service workers to be more engaged at work, emotional intelligence and social support is vital. If these factors are not in place, their well-being may be in jeopardy. The objective of this research was to determine the relationship between E...

  1. Measuring the relative performance in mining industry: A case study of cooperative Seif mining company

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Lotfi

    2013-09-01

    Full Text Available In this paper, we present an empirical study to measure the performance of a salt refinery named Seif cooperative mining. The study uses Political–Economical-Social– Technological Analysis (PEST technique to evaluate opportunities and threats associated with external as well as internal factors influencing the firm. The study designs a questionnaire in Liket scale and asks decision maker to evaluate internal/external threats. In terms of external factors, there are four opportunities and ten threats associated with External factor evaluation (EFE factors. In terms of opportunities, existing potential for export has received the highest priority followed by easy access to national transportation and government support. On the threats part, firm’s dependency on importing necessary parts, global price reduction and mineral reserve termination in near future are the most important issues. In addition, in terms of internal factors, on the opportunity part, access to necessary utilities is considered as the most important factor followed by availability of high level lab equipment and sufficient assets and equities. On the threats, depreciation is considered as the most important issue followed by lack of optimum utilization of equipment and lack of enterprise resource planning. In addition, the study uses balanced score card (BSC technique to look at the performance of the firm in terms of learning and growth, internal process, customer and financials. The study determines the present and ideal status of the firm.

  2. A very British phenomenon? Industrial politics and the decline of the Japanese coal mining industry since the 1950s

    Energy Technology Data Exchange (ETDEWEB)

    W.R. Garside

    2005-07-15

    This paper describes how the Japanese government gradually abandoned its support for coal mining after 1945. Drawing parallels with the British experience during the 1930s, this article shows how coal miners and owners in Japan were able to slow the pace of economic adjustment from the 1950s. The government's initial reluctance to act reflected its willingness to put industrial politics to the fore, preferring to avoid alienating political support and aggravating a vocal unionised sector of the labour force. It eventually accepted and acted upon the need for draconian retrenchment.

  3. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    OpenAIRE

    2015-01-01

    There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean developmen...

  4. Evaluation of water resources around Barapukuria coal mine industrial area, Dinajpur, Bangladesh

    Science.gov (United States)

    Howladar, M. Farhad; Deb, Pulok Kanti; Muzemder, A. T. M. Shahidul Huqe; Ahmed, Mushfique

    2014-09-01

    Water is a very important natural resource which can be utilized in renewable or non-renewable forms but before utilizing, the evaluation of the quality of this resource is crucial for a particular use. However, the problems of water quality are more severe in areas where the mining and mineral processes' industries are present. In mining processes, several classes of wastes are produced which may turn into ultimately the sources of water quality and environmental degradation. In consequences, the evaluations of water quality for livestock, drinking, irrigation purposes and environmental implications have been carried out around the Barapukuria Coal Mining Industry under different methods and techniques such as primarily the field investigation; secondly the laboratory chemical analysis and thirdly justified the suitability of the laboratory analysis with statistical representation and correlation matrix, Schoeller plot, Piper's Trilinear diagram, Expanded Durov diagram, Wilcox diagram, US salinity diagram, Doneen's chart and others. The results of all surface and ground water samples analysis show that the characteristics and concentrations of all the major physical and chemical parameters such as pH, EC, TDS, Na+, K+, Ca2+, Mg2+, Fetotal, Cl-, HCO3 -, CO3 2- and SO4 2- are varied from one sample to other but well analogous with the WHO and EQS standard limit for all purposes in the area where the abundance of the major ions is as follows: Ca2+ > Na+ > Mg2+ > K+ > Fetotal = HCO3 - > SO4 2- > Cl- > CO3 2-. The graphical exposition of analytical data demonstrates two major hydrochemical facies for example: calcium-bicarbonate (Ca2+- HCO3 -) and magnesium-bicarbonate (Mg2+- HCO3 -) type facies which directly support the shallow recently recharged alkaline water around the industry. The calculated values for the evaluation classification of water based on TDS, Na%, EC, SAR, PI, RSC, MH, and TH replicate good to excellent use of water for livestock, drinking and

  5. Design and application of electrical fire monitoring system in mining industry

    Institute of Scientific and Technical Information of China (English)

    Diao Jinxia; Zhang Guilin; Hu Haidong; Zou Zhihui; Zhang Baojin

    2015-01-01

    To protect mining areas from electrical fire, it is very important to install electrical fire monitoring system to ensure safety in development of mineral resources and for buildings. In this paper, design for electrical fire monitoring and detection system with optional sensor modules has been proposed. In addition, necessity and suitability of electrical fire monitoring and detection system with optional sensor modules in mining areas have been reviewed. The designed electrical fire monitoring and detection system suit-able for work environment of mining industry is composed by host-computer monitoring software and slave-computer detectors. Monitoring detectors are manufactured by using embedded technology. Exter-nal shells deployed have superior enclosure performances and explosion-proof properties. It is easy to install and maintain the system. In general, the system has reached, or even exceeded standards specified in national standards for performances and appearances of such devices. Test results show application of electrical fire monitoring and detection system can effectively enhance monitoring intensity over the mining areas and provide reliable guarantee to ensure orderly development of mineral resources and to protect physical and property safety of citizens in these areas.

  6. The South African coal mining industry: A need for a more efficient and collaborative supply chain

    Directory of Open Access Journals (Sweden)

    David Pooe

    2011-11-01

    Full Text Available It is estimated that about two-thirds of global coal is used for power generation and that, in the next 20 years, over 70% of the demand for coal will come from China and India. Coal accounts for approximately 41% of the world's electricity generation. Demand for thermal coal is influenced by factors that include availability, prices of competing products such as oil, gas and nuclear power, and the demand for electricity. The aim of this article is to provide an exposition of supply chain dynamics within the South African coal mining industry and to argue for a more efficient and collaborative supply chain. The authors attempt to investigate at local and global level, the current trends pertaining to the level of reserves, production and consumption of coal. The article further demonstrates the shortcomings of current logistics in meeting the demand for coal in both domestic and export markets. The article draws from secondary data sourced from academic papers, government and agency documents in the exposition of the coal mining supply chain. The paper concludes by recommending the need for a scientific study on supply chain constraints facing the coal mining industry in South Africa.

  7. Research vulnerability: an illustrative case study from the South African mining industry.

    Science.gov (United States)

    Horn, Lyn

    2007-12-01

    The concept of 'vulnerability' is well established within the realm of research ethics and most ethical guidelines include a section on 'vulnerable populations'. However, the term 'vulnerability', used within a human research context, has received a lot of negative publicity recently and has been described as being simultaneously 'too broad' and 'too narrow'. The aim of the paper is to explore the concept of research vulnerability by using a detailed case study - that of mineworkers in post-apartheid South Africa. In particular, the usefulness of Kipnis's taxonomy of research vulnerability will be examined. In recent years the volume of clinical research on human subjects in South Africa has increased significantly. The HIV and TB pandemics have contributed to this increase. These epidemics have impacted negatively on the mining industry; and mining companies have become increasingly interested in research initiatives that address these problems. This case study explores the potential research vulnerability of mineworkers in the context of the South African mining industry and examines measures that can reduce this vulnerability.

  8. Applying data mining techniques to explore factors contributing to occupational injuries in Taiwan's construction industry.

    Science.gov (United States)

    Cheng, Ching-Wu; Leu, Sou-Sen; Cheng, Ying-Mei; Wu, Tsung-Chih; Lin, Chen-Chung

    2012-09-01

    Construction accident research involves the systematic sorting, classification, and encoding of comprehensive databases of injuries and fatalities. The present study explores the causes and distribution of occupational accidents in the Taiwan construction industry by analyzing such a database using the data mining method known as classification and regression tree (CART). Utilizing a database of 1542 accident cases during the period 2000-2009, the study seeks to establish potential cause-and-effect relationships regarding serious occupational accidents in the industry. The results of this study show that the occurrence rules for falls and collapses in both public and private project construction industries serve as key factors to predict the occurrence of occupational injuries. The results of the study provide a framework for improving the safety practices and training programs that are essential to protecting construction workers from occasional or unexpected accidents.

  9. AN ANALYSIS OF MAINTENANCE PERFORMANCE SYSTEMS IN THE SOUTH AFRICAN MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Kotze, R. L. M.

    2012-11-01

    Full Text Available The measurement of performance is an essential part of the management process. The planning function usually defines the goals and objectives for the business enterprise or division of the enterprise. The control function should monitor the performance measures and establish corrective action if actual performance deviates significantly from planned performance. Maintenance performance measurement is therefore essential to ensure that maintenance objectives are achieved, and that maintenance adds value for the company. The objective of this paper is to discuss the findings of a project that investigated aspects of the maintenance performance system of a number of mining companies in South Africa. The findings of a survey indicated that maintenance performance management is not yet used to its full potential in the mining industry.

  10. Radiation exposure control from the application of nuclear gauges in the mining industry in Ghana.

    Science.gov (United States)

    Faanu, A; Darko, E O; Awudu, A R; Schandorf, C; Emi-Reynolds, G; Yeboah, J; Glover, E T; Kattah, V K

    2010-05-01

    The use of nuclear gauges for process control and elemental analysis in the mining industry in Ghana, West Africa, is wide spread and on the increase in recent times. The Ghana Radiation Protection Board regulates nuclear gauges through a system of notification and authorization by registration or licensing, inspection, and enforcement. Safety assessments for authorization and enforcement have been established to ensure the safety and security of radiation sources as well as protection of workers and the general public. Appropriate training of mine staff is part of the efforts to develop the necessary awareness about the safety and security of radiation sources. The knowledge and skills acquired will ensure the required protection and safety at the workplaces. Doses received by workers monitored over a period between 1998 and 2007 are well below the annual dose limit of 20 mSv recommended by the International Commission on Radiological Protection.

  11. Estimating the continuous risk of accidents occuring in the mining industry in South Africa

    Directory of Open Access Journals (Sweden)

    Van den Honert, Andrew Francis

    2015-11-01

    Full Text Available This study contributes to the on-going efforts to improve occupational safety in the mining industry by creating a model capable of predicting the continuous risk of occupational accidents occurring. Contributing factors were identified and their sensitivity quantified. The approach included using an Artificial Neural Network (ANN to identify patterns between the input attributes and to predict the continuous risk of accidents occurring. The predictive Artificial Neural Network (ANN model used in this research was created, trained, and validated in the form of a case study with data from a platinum mine near Rustenburg in South Africa. This resulted in meaningful correlation between the predicted continuous risk and actual accidents.

  12. Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors

    Directory of Open Access Journals (Sweden)

    József Varga

    2016-08-01

    Full Text Available Objectives: The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Material and Methods: Continuous heart rate (HR recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder – Bioport (ZAK, Germany. The work processes were simultaneously documented by video recording along with drawing up the traditional ergonomic workday schedule. All workers passed health evaluation for fitness for work. The effects of different psychological factors (simulated danger, “instrument stress,” presence of managers, and effect of prior involvement in accidents as well as different mining technologies and work place illumination on the work pulse were evaluated. The statistical analysis was completed using SPSS software (version 13.0, SPSS Inc., USA. Results: The work-related physiological strain differed between work places with different mining technologies in groups of 12–18 workers. The work pulse was lowest in bauxite mining (ΔHR = 22±8.9 bpm and highest in drift drilling in dead rock with electric drilling machine (ΔHR = 30±6.9 bpm. During sham alarm situation the work pulse was significantly higher than during normal activities with the same physical task (ΔHR = 36.7±4.8 bpm vs. 25.8±1.6 bpm, p < 0.001. When work was performed under different psychological stress, the work pulse was consistently higher, while improving the work place illumination decreased the physiological strain appreciably (ΔHR (median, 25–75 percentiles = 23, 20–26 bmp vs. 28, 25–31.3 bpm, p < 0.001. Conclusions: Recording the heart rate during whole-shift work along with the work conditions gives reliable results and helps isolating factors that contribute to increased strain. The

  13. Mining in Germany, still an important industry.. Mining authorities in transition; Bergbau in Deutschland - noch immer ein wichtiger Wirtschaftszweig.. Die Bergbehoerden im Wandel

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, R. [Saechsischen Oberbergamt, Freiberg (Germany)

    2004-03-01

    The German mining industry underwent a period of transition in the past two decades. Metal ore mining has been abandoned, coal mining has been reduced to fewer mines receiving and fewer funds, and potassium and salt mining were concentrated in order to maintain their position as third biggest producer in the world. Brown coal mining has been able to cope with the pressure put on it by the Reimbursement Act and is still number one in the world. The German reunification entailed the biggest land reclamation projects ever in abandoned East German mining areas as well as private investments in the world's most modern thermal power plants. [German] Der deutsche Bergbau hat in den letzten 20 Jahren einen starken Wandel durchgemacht. Metallerzbergbau ist heute Geschichte, der Steinkohlenbergbau ist auf erheblich weniger Schachtanlagen mit erheblich geringeren Subventionen konzentriert worden, der Kali- und der Steinsalzbergbau haben ebenfalls durch Konzentrationsprozesse ihre Position als jeweils drittgroesster Produzent der Welt behauptet. Der Braunkohlenbergbau hat scheinbar ohne aeusserlich erkennbaren Schaden den ungeheueren Anpassungsdruck durch das Energieeinspeisungsgesetz ueberstanden und ist weiterhin die Nummer eins im Weltmassstab. Die Wiedervereinigung hat fuer den auf Autarkie ausgelegten Bergbau im frueheren Ostblock erhebliche Auswirkungen gehabt und fuer die oeffentlichen Haende die wahrscheinlich groessten Sanierungsprojekte der Welt zur Folge gehabt, aber auch Investitionen der Privatwirtschaft in die modernsten Waermekraftwerke der Welt. (orig.)

  14. Case studies of sealing methods and materials used in the salt and potash mining industries

    Energy Technology Data Exchange (ETDEWEB)

    Eyermann, T.J.; Sambeek, L.L. Van [RE/SPEC Inc., Rapid City, SD (United States); Hansen, F.D. [Sandia National Labs., Albuquerque, NM (United States). Repository Isolation Systems Dept.

    1995-11-01

    Sealing methods and materials currently used in salt and potash industries were surveyed to determine if systems analogous to the shaft seal design proposed for the Waste Isolation Pilot Plant (WIPP) exist. Emphasis was first given to concrete and then expanded to include other materials. Representative case studies could provide useful design, construction, and performance information for development of the WIPP shaft seal system design. This report contains a summary of engineering and construction details of various sealing methods used by mining industries for bulkheads and shaft liners. Industrial experience, as determined from site visits and literature reviews, provides few examples of bulkheads built in salt and potash mines for control of water. Sealing experiences representing site-specific conditions often have little engineering design to back up the methods employed and even less quantitative evaluation of seal performance. Cases examined include successes and failures, and both contribute to a database of experiences. Mass salt-saturated concrete placement under ground was accomplished under several varied conditions. Information derived from this database has been used to assess the performance of concrete as a seal material. Concrete appears to be a robust material with successes in several case studies. 42 refs.

  15. Chronic intermittent high altitude exposure, occupation, and body mass index in workers of mining industry.

    Science.gov (United States)

    Esenamanova, Marina K; Kochkorova, Firuza A; Tsivinskaya, Tatyana A; Vinnikov, Denis; Aikimbaev, Kairgeldy

    2014-09-01

    The obesity and overweight rates in population exposed to chronic intermittent exposure to high altitudes are not well studied. The aim of the retrospective study was to evaluate whether there are differences in body mass index in different occupation groups working in intermittent shifts at mining industry at high altitude: 3800-4500 meters above sea level. Our study demonstrated that obesity and overweight are common in workers of high altitude mining industry exposed to chronic intermittent hypoxia. The obesity rate was lowest among miners as compared to blue- and white-collar employees (9.5% vs. 15.6% and 14.7%, p=0.013). Obesity and overweight were associated with older age, higher rates of increased blood pressure (8.79% and 5.72% vs. 1.92%), cholesterol (45.8% and 45.6% vs. 32.8%) and glucose (4.3% and 1.26% vs. 0.57%) levels as compared to normal body mass index category (pmining industry exposed to intermittent high-altitude hypoxia. Therefore, assessment and monitoring of body mass index seems to be essential in those who live and work at high altitudes to supply the correct nutrition, modify risk factors, and prevent related disorders.

  16. Using RFID Tagging in a Mining Industry Maintenance, Repair, and Operating (MRO) Supply Warehouse: A Case Study

    Science.gov (United States)

    Smith, George D.

    2008-01-01

    The use of Radio Frequency Identification (RFID) technology has been shown to be successful by reducing operating costs in the retail and manufacturing industries, but has never been considered in the literature for a mining industry maintenance, repair, and operating (MRO) supply chain. This field study was conducted to determine whether or not…

  17. Using RFID Tagging in a Mining Industry Maintenance, Repair, and Operating (MRO) Supply Warehouse: A Case Study

    Science.gov (United States)

    Smith, George D.

    2008-01-01

    The use of Radio Frequency Identification (RFID) technology has been shown to be successful by reducing operating costs in the retail and manufacturing industries, but has never been considered in the literature for a mining industry maintenance, repair, and operating (MRO) supply chain. This field study was conducted to determine whether or not…

  18. Job characteristics, ill health and negative work-home interference in the mining industry

    Directory of Open Access Journals (Sweden)

    Gary Oldfield

    2007-02-01

    Full Text Available The objective of this research was to test a structural model including job demands, job resources, ill health and negative work-home interference (WHI. Random samples (N = 320 were taken from employees working in the mining industry. The results indicated that job demands and job resources had an impact on ill health, and that ill health was associated with negative WHI. It was also found that job demands had a direct relationship with negative WHI, in addition to the indirect relationship through ill health. Job resources were not related not negative WHI.

  19. ANALYZING THE CLASSIC METHODS OF ORGANIZING THE ADMINISTRATION ACCOUNTACY USED IN THE CARBONIFEROUS MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    PALIU-POPA Lucia

    2009-12-01

    Full Text Available Information regarding production costs occupy a central slot, determined by their implications regarding the present and future evolution of a company. The value of information regarding the cost of production justifies its use both in decisions regarding the current activity and in the company’s future strategy. The efficient organization of economic activity in the carboniferous mining industry imposes a constant improvement of management methods, which also implies a reconsideration of administration accountancy methods and cost control, which have to become capable of offering information that can be compatible to the requirements for an efficient management of the production process, in a market economy.

  20. Machine-related injuries in the US mining industry and priorities for safety research.

    Science.gov (United States)

    Ruff, Todd; Coleman, Patrick; Martini, Laura

    2011-03-01

    Researchers at the National Institute for Occupational Safety and Health studied mining accidents that involved a worker entangled in, struck by, or in contact with machinery or equipment in motion. The motivation for this study came from the large number of severe accidents, i.e. accidents resulting in a fatality or permanent disability, that are occurring despite available interventions. Accident descriptions were taken from an accident database maintained by the United States Department of Labor, Mine Safety and Health Administration, and 562 accidents that occurred during 2000-2007 fit the search criteria. Machine-related accidents accounted for 41% of all severe accidents in the mining industry during this period. Machinery most often involved in these accidents included conveyors, rock bolting machines, milling machines and haulage equipment such as trucks and loaders. The most common activities associated with these accidents were operation of the machine and maintenance and repair. The current methods to safeguard workers near machinery include mechanical guarding around moving components, lockout/tagout of machine power during maintenance and backup alarms for mobile equipment. To decrease accidents further, researchers recommend additional efforts in the development of new control technologies, training materials and dissemination of information on best practices.

  1. Radon exposure in uranium mining industry vs. exposure in tourist caves.

    Science.gov (United States)

    Quindós Poncela, L; Fernández Navarro, P; Sainz Fernández, C; Gómez Arozamena, J; Bordonoba Perez, M

    2004-01-01

    There is a fairly general consensus among health physicists and radiation professionals that exposure to radon progeny is the largest and most variable contribution to the population's exposure to natural sources of radiation. However, this exposure is the subject of continuing debate concerning the validity of risk assessment and recommendations on how to act in radon-prone areas. The purpose of this contribution is to situate the radon issue in Spain in two very different settings. The first is a uranium mining industry located in Saelices el Chico (Salamanca), which is under strict control of the Spanish Nuclear Safety Council (CSN). We have measured radon concentrations in different workplaces in this mine over a five-year period. The second setting comprises four tourist caves, three of which are located in the province of Cantabria and the fourth on the Canary Island of Lanzarote. These caves are not subject to any administrative control of radiation exposure. Measured air 222Rn concentrations were used to estimate annual effective doses due to radon inhalation in the two settings, and dose values were found to be from 2 to 10 times lower in the uranium mine than in the tourist caves. These results were analysed in the context of the new European Basic Safety Standards Directive (EU-BSS, 1996).

  2. Abandoned coal mining sites: using ecotoxicological tests to support an industrial organic sludge amendment.

    Science.gov (United States)

    Chiochetta, Claudete G; Radetski, Marilice R; Corrêa, Albertina X R; Tischer, Vinícius; Tiepo, Erasmo N; Radetski, Claudemir M

    2013-11-01

    The different stages involved in coal mining-related activities result in a degraded landscape and sites associated with large amounts of dumped waste material. Remediation of these contaminated soils can be carried out by application of industrial organic sludge if the concerns regarding the potential negative environmental impacts of this experimental practice are properly addressed. In this context, the objective of this study was to use ecotoxicological tests to determine the quantity of organic industrial sludge that is required as a soil amendment to restore soil production while avoiding environmental impact. Chemical analysis of the solids (industrial sludge and soil) and their leachates was carried out as well as a battery of ecotoxicity tests on enzymes (hydrolytic activity), bacteria, algae, daphnids, earthworms, and higher plants, according to standardized methodologies. Solid and leachate samples of coal-contaminated soil were more toxic than those of industrial sludge towards enzyme activity, bacteria, algae, daphnids, and earthworms. In the case of the higher plants (lettuce, corn, wild cabbage, and Surinam cherry) the industrial sludge was more toxic than the coal-contaminated soil, and a soil/sludge mixture (66:34% dry weight basis) had a stimulatory effect on the Surinam cherry biomass. The ecotoxicological assessment of the coal-contaminated soil remediation using sludge as an amendment is very important to determine application rates that could promote a stimulatory effect on agronomic species without negatively affecting the environment.

  3. Metal-containing residues from industry and in the environment: geobiotechnological urban mining.

    Science.gov (United States)

    Glombitza, Franz; Reichel, Susan

    2014-01-01

    This chapter explains the manifold geobiotechnological possibilities to separate industrial valuable metals from various industrial residues and stored waste products of the past. In addition to an overview of the different microbially catalyzed chemical reactions applicable for a separation of metals and details of published studies, results of many individual investigations from various research projects are described. These concern the separation of rare earth elements from phosphorous production slags, the attempts of tin leaching from mining flotation residues, the separation of metals from spent catalysts, or the treatment of ashes as valuable metal-containing material. The residues of environmental technologies are integrated into this overview as well. The description of the different known microbial processes offers starting points for suitable and new technologies. In addition to the application of chemolithoautotrophic microorganisms the use of heterotrophic microorganisms is explained.

  4. Number of conveyor belts optimization regarding to its type and logistical parameters in mining industry

    Directory of Open Access Journals (Sweden)

    Dušan Malindžák

    2008-12-01

    Full Text Available Material transportation by belt conveyers is widely used in many industrial branches including mining plants. Belt conveyingdevelopment during the last year was oriented mainly on construction of belts. The consequence of this is the improvement of itsmanufacture qualities bringing down the costs for their exchange and maintenance.Despite the fact that there are some theoreticalcalculations based on a standards it is common in the industry that the belt is not properly selected or it is overdesigned or number of itstypes is too large what can lead to increased costs for its storage. The paper describes the optimization of number of belt types in miningcompany SIDERIT, s. r. o. Nižná Slaná by the method of modernization and unification of belts under practical skills and projectingbased on theoretical calculations.

  5. Comprehensive assessment of exposures to elongate mineral particles in the taconite mining industry.

    Science.gov (United States)

    Hwang, Jooyeon; Ramachandran, Gurumurthy; Raynor, Peter C; Alexander, Bruce H; Mandel, Jeffrey H

    2013-10-01

    Since the 1970s, concerns have been raised about elevated rates of mesothelioma in the vicinity of the taconite mines in the Mesabi Iron Range. However, insufficient quantitative exposure data have hampered investigations of the relationship between cumulative exposures to elongate mineral particles (EMP) in taconite dust and adverse health effects. Specifically, no research on exposure to taconite dust, which includes EMP, has been conducted since 1990. This article describes a comprehensive assessment of present-day exposures to total and amphibole EMP in the taconite mining industry. Similar exposure groups (SEGs) were established to assess present-day exposure levels and buttress the sparse historical data. Personal samples were collected to assess the present-day levels of worker exposures to EMP at six mines in the Mesabi Iron Range. The samples were analyzed using National Institute for Occupational Safety and Health (NIOSH) methods 7400 and 7402. For many SEGs in several mines, the exposure levels of total EMP were higher than the NIOSH Recommended Exposure Limit (REL). However, the total EMP classification includes not only the asbestiform EMP and their non-asbestiform mineral analogs but also other minerals because the NIOSH 7400 cannot differentiate between these. The concentrations of amphibole EMP were well controlled across all mines and were much lower than the concentrations of total EMP, indicating that amphibole EMP are not major components of taconite EMP. The levels are also well below the NIOSH REL of 0.1 EMP cc(-1). Two different approaches were used to evaluate the variability of exposure between SEGs, between workers, and within workers. The related constructs of contrast and homogeneity were calculated to characterize the SEGs. Contrast, which is a ratio of between-SEG variability to the sum of between-SEG and between-worker variability, provides an overall measure of whether there are distinctions between the SEGs. Homogeneity, which is

  6. Engineers and maintenance managers in the Australian coal-mining industry: are we ready for the twenty-first century?

    Energy Technology Data Exchange (ETDEWEB)

    Clark, D. [Terotechnology Services Pty Ltd., Cessnock, NSW (Australia)

    2000-10-01

    Coal mines in the twenty-first century will require engineers to respond to arguably the greatest challenge in the history of the Australian coal industry. The article discusses the roles and skills, qualifications and experience required by mine maintenance managers. The author uses information he obtained from a survey in 1990, of perceptions of skills and experience required in maintenance managers and from an analysis, in 1996, of requirements of such personnel made from situations vacant advertisements. 4 refs., 1 tab.

  7. Mining

    Directory of Open Access Journals (Sweden)

    Khairullah Khan

    2014-09-01

    Full Text Available Opinion mining is an interesting area of research because of its applications in various fields. Collecting opinions of people about products and about social and political events and problems through the Web is becoming increasingly popular every day. The opinions of users are helpful for the public and for stakeholders when making certain decisions. Opinion mining is a way to retrieve information through search engines, Web blogs and social networks. Because of the huge number of reviews in the form of unstructured text, it is impossible to summarize the information manually. Accordingly, efficient computational methods are needed for mining and summarizing the reviews from corpuses and Web documents. This study presents a systematic literature survey regarding the computational techniques, models and algorithms for mining opinion components from unstructured reviews.

  8. Sustainable Non-Metallic Building Materials

    Directory of Open Access Journals (Sweden)

    Svetlana Tretsiakova-McNally

    2010-01-01

    Full Text Available Buildings are the largest energy consumers and greenhouse gases emitters, both in the developed and developing countries. In continental Europe, the energy use in buildings alone is responsible for up to 50% of carbon dioxide emission. Urgent changes are, therefore, required relating to energy saving, emissions control, production and application of materials, use of renewable resources, and to recycling and reuse of building materials. In addition, the development of new eco-friendly building materials and practices is of prime importance owing to the growing environmental concerns. This review reflects the key tendencies in the sector of sustainable building materials of a non-metallic nature that have occurred over the past decade or so.

  9. Application of ERTS-1 imagery to fracture related mine safety hazards in the coal mining industry. [Indiana

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

    1974-01-01

    The author has identified the following significant results. New fracture detail of Indiana has been observed and mapped from ERTS-1 imagery. Studies so far indicate a close relationship between the directions of fracture traces mapped from the imagery, fractures measured on bedrock outcrops, and fractures measured in the underground mines. First hand observations and discussions with underground mine operators indicate good correlation of mine hazard maps prepared from ERTS-1/aircraft imagery and actual roof falls. The inventory of refuse piles/slurry ponds of the coal field of Indiana has identified over 225 such sites from past mining operations. These data will serve the State Legislature in making tax decisions on coal mining which take on increased importance because of the energy crisis.

  10. Undisclosed chemicals--implications for risk assessment: a case study from the mining industry.

    Science.gov (United States)

    Singh, Khareen; Oates, Christopher; Plant, Jane; Voulvoulis, Nikolaos

    2014-07-01

    Many of the chemicals used in industry can be hazardous to human health and the environment, and some formulations can have undisclosed ingredients and hazards, increasing the uncertainty of the risks posed by their use. The need for a better understanding of the extent of undisclosed information in chemicals arose from collecting data on the hazards and exposures of chemicals used in typical mining operations (copper, platinum and coal). Four main categories of undisclosed chemicals were defined (incomplete disclosure; chemicals with unspecific identities; relative quantities of ingredients not stated; and trade secret ingredients) by reviewing material safety data sheet (MSDS) omissions in previous studies. A significant number of chemicals (20% of 957 different chemicals) across the three sites had a range of undisclosed information, with majority of the chemicals (39%) having unspecific identities. The majority of undisclosed information was found in commercially available motor oils followed by cleaning products and mechanical maintenance products, as opposed to reagents critical to the main mining processes. All three types of chemicals had trade secrets, unspecific chemical identities and incomplete disclosures. These types of undisclosed information pose a hindrance to a full understanding of the hazards, which is made worse when combined with additional MSDS omissions such as acute toxicity endpoints (LD50) and/or acute aquatic toxicity endpoints (LC50), as well as inadequate hazard classifications of ingredients. The communication of the hazard information in the MSDSs varied according to the chemical type, the manufacturer and the regulations governing the MSDSs. Undisclosed information can undermine occupational health protection, compromise the safety of workers in industry, hinder risk assessment procedures and cause uncertainty about future health. It comes down to the duty of care that industries have towards their employees. With a wide range of

  11. Exploring the challenges associated with the greening of supply chains in the South African manganese and phosphate mining industry

    Directory of Open Access Journals (Sweden)

    R.I. David Pooe

    2014-03-01

    Full Text Available As with most mining activities, the mining of manganese and phosphate has serious consequences for the environment. Despite a largely adequate and progressive framework for environmental governance developed since 1994, few mines have integrated systems into their supply chain processes to minimise environmental risks and ensure the achievement of acceptable standards. Indeed, few mines have been able to implement green supply chain management (GrSCM. The purpose of this article was to explore challenges related to the implementation of GrSCM and to provide insight into how GrSCM can be implemented in the South African manganese and phosphate industry. This article reported findings of a qualitative study involving interviews with 12 participants from the manganese and phosphate industry in South Africa. Purposive sampling techniques were used. Emerging from the study were six themes, all of which were identified as key challenges in the implementation of GrSCM in the manganese and phosphate mining industry. From the findings, these challenges include the operationalisation of environmental issues, lack of collaboration and knowledge sharing, proper application of monitoring and control systems,lack of clear policy and legislative direction, the cost of implementing GrSCM practices, and the need for strong leadership and management of change. On the basis of the literature reviewed and empirical findings, conclusions were drawn and policy and management recommendations were accordingly made.

  12. Structural change by reorganisation in the coal mining industry; Strukturwandel durch Neuordnung im Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Beimann, W. [Montan-Grundstuecksgesellschaft mbH (MGG), Essen (Germany)

    1998-06-10

    The renewed retrenchment of the German coal mining industry on the basis of the decisions in March 1977 is changing the image of the former coal mining companies and regions. The RAG group counteracted this change at an early stage by diversification and internationalisation of its activities. However, the structural change in the area is also assisted in various ways: By investments, training in occupations with a promising future and by preparing and making available the former colliery sites. With the `Flaeche Plus` concept of MGG the RAG group is intensifying its efforts in the marketing, development and utilisation of the areas. (orig./MSK) [Deutsch] Die erneute Rueckfuehrung des deutschen Steinkohlenbergbaus aufgrund der Beschluesse vom Maerz 1997 veraendert das Bild der Steinkohlenunternehmen und -regionen. Der RAG-Konzern begegnete diesem Wandel fruehzeitig durch eine Diversifizierung und Internationalisierung der Aktivitaeten. Aber auch der Strukturwandel im Revier wird vielfaeltig unterstuetzt: Durch Investitionen, die Ausbildung in zukunftstraechtigen Berufen und durch Aufbereitung und Zurverfuegungstellung der ehemaligen Bergbauflaechen. Mit dem Konzept `Flaeche Plus` der MGG bemueht sich der RAG-Konzern auch intensiv um die Vermarktung, Entwicklung und Nutzung der Flaechen. (orig./MSK)

  13. Factors in Adoption of e-Learning in the Mining Industry of South Africa

    Directory of Open Access Journals (Sweden)

    Machdel Matthee

    2014-06-01

    Full Text Available The mining industry in South Africa contributes significantly to its economy. Training is an important component in these environments and e-Learning is often used to train the large workforce. In the face of current labour unrest and job cuts in this sector, it is foreseen that e-Learning might play an increasing important role to upskill the remaining work force. However, it appears that low motivation and resistance to e-Learning exist amongst learners. The aim of this research was to examine the factors that may contribute to this resistance and/or adoption from the perspectives of e-Learning managers and practitioners. Activity theory was used as the theoretical lens and its main elements (tools, subjects, rules, objects, community were used to analyse interviews with participants from two mining companies. Potential contradictions were identified in order to explore resistance to e-Learning. The main findings indicate that: 1 proper communication of expectations by different stakeholders of e-Learning is imperative, 2 top management support for e-Learning should stem from integration into the organisational goals, 3 more attention should be given to interaction between learners and facilitators and also between learners, 4 a focus on people development rather than only compliance may lead to lower resistance, and 5 top management support and involvement should be made visible.

  14. Heavy equipment maintenance wastes and environmental management in the mining industry.

    Science.gov (United States)

    Guerin, Turlough F

    2002-10-01

    Maintenance wastes, if not managed properly, represent significant environmental issues for mining operations. Petroleum hydrocarbon liquid wastes were studied at an Australian site and a review of the literature and technology vendors was carried out to identify oil/water separation technologies. Treatment technologies and practices for managing oily wastewater, used across the broader mining industry in the Asia-Pacific region, were also identified. Key findings from the study were: (1) primary treatment is required to remove grease oil contamination and to protect secondary oily wastewater treatment systems from being overloaded; (2) selection of an effective secondary treatment system is dependent on influent oil droplet size and concentration, suspended solids concentration, flow rates (and their variability), environmental conditions, maintenance schedules and effectiveness, treatment targets and costs; and (3) oily wastewater treatment systems, based on mechanical separation, are favoured over those that are chemically based, as they simplify operational requirements. Source reduction, through housekeeping, equipment and reagent modifications, and segregation and/or consolidation of hydrocarbon waste streams, minimizes treatment costs, safety and environmental impact.

  15. [Gender inequity in health in contexts of environmental risk from mining and industrial activity in Mexico].

    Science.gov (United States)

    Catalán-Vázquez, Minerva; Riojas-Rodríguez, Horacio

    2015-06-01

    Analyze how gender inequity manifests in contexts of poverty in different environmental risk scenarios in Mexico. Qualitative design based on six discussion groups and 54 in-depth interviews with women from six exposed communities: two to environmental manganese in a mining district, two in an industrial corridor, and two bordering a sanitary landfill. A document review of environmental and health studies in each area was done to relate them to the women's perspective on the problem. In the three case studies, by gender roles, women stay at home and do housework and, therefore, are subject to intense environmental exposure when carrying out their daily tasks, such as house cleaning. Interview and discussion group results were found to be related to epidemiological study results. In the case of the mining district, women's perceptions are consistent with study comments on adverse cognitive effects of manganese exposure. In all three cases, there are serious limitations on women's political participation in environmental risk management. Due to conditions of inequity, women are highly exposed to environmental health risks and their social participation in solving environmental problems is quite limited. These results have social and environmental policy implications in the areas studied, especially with regard to risk assessment, management, and communication.

  16. [Effect of vibration, noise, physical exertion and unfavorable microclimate on carbohydrate metabolism in workers engaged into mining industry and machine building].

    Science.gov (United States)

    Lapko, I V; Kir'iakov, V A; Antoshina, L I; Pavlovskaia, N A; Kondratovich, S V

    2014-01-01

    The authors studied influence of vibration, noise, physical overexertion and microclimate on carbohydrates metabolism and insulin resistance in metal mining industry workers. Findings are that vibration disease appeared to have maximal effect on insulin resistance test results and insulin level. The authors suggested biomarkers for early diagnosis of insulin resistance disorders in metal mining industry workers.

  17. Being a Child in an Industrial Contemporaneous Environment. Examples from the Mining Mountains of Cartagena-La Unión (Murcia

    Directory of Open Access Journals (Sweden)

    Óscar González Vergara

    2013-05-01

    Full Text Available This paper will discuss various aspects of childhood in an industrial environment, focusing particularly the phenomenon of child labor. We will draw examples from one of the most important industrial mining complex of contemporary Spain, the mining area in Cartagena-La Union, where child labor was widespread. We will complete this vision of childhood with the examples available in the mining songs, which reflect many aspects of childhood.

  18. Mining the metagenome of activated biomass of an industrial wastewater treatment plant by a novel method.

    Science.gov (United States)

    Sharma, Nandita; Tanksale, Himgouri; Kapley, Atya; Purohit, Hemant J

    2012-12-01

    Metagenomic libraries herald the era of magnifying the microbial world, tapping into the vast metabolic potential of uncultivated microbes, and enhancing the rate of discovery of novel genes and pathways. In this paper, we describe a method that facilitates the extraction of metagenomic DNA from activated sludge of an industrial wastewater treatment plant and its use in mining the metagenome via library construction. The efficiency of this method was demonstrated by the large representation of the bacterial genome in the constructed metagenomic libraries and by the functional clones obtained. The BAC library represented 95.6 times the bacterial genome, while, the pUC library represented 41.7 times the bacterial genome. Twelve clones in the BAC library demonstrated lipolytic activity, while four clones demonstrated dioxygenase activity. Four clones in pUC library tested positive for cellulase activity. This method, using FTA cards, not only can be used for library construction, but can also store the metagenome at room temperature.

  19. Design of Controlled Processing Conditions for Drop Forgings Made of Microalloy Steel Grades for Mining Industry

    Directory of Open Access Journals (Sweden)

    Skubisz P.

    2015-04-01

    Full Text Available Effect of plastic processing and controlled cooling on microstructure and mechanical properties of experimental steel grades with microalloyed with Ti, V and/or Nb, varying in the content of Mo is presented as an offer for mining industry for replacement traditionally heat-treatable hardenability grades. The goal of the work is producing microstructure condition, which after controlled hot forging and direct heat treatment, involving quenching and self-tempering, are meant to provide good combination of mechanical properties, such as TYS 800 MPa, UTS 1050 MPa, elongation to fracture at least A5 15% and/or impact strength at room temperature KCV 60 J/cm2. Hardenability assessment and dilatometric examination allowed formulation of direct heat treatment guidelines, taking into consideration fields of temperature and strain in a typical hot forging process, estimated numerically, with the use of plastometric tests results, as well as the use of unique cooling cycles after forging.

  20. Size of Non-Metallic Inclusions in High-Grade Medium Carbon Steel

    Directory of Open Access Journals (Sweden)

    Lipiński T.

    2014-12-01

    Full Text Available Non-metallic inclusions found in steel can affect its performance characteristics. Their impact depends not only on their quality, but also, among others, on their size and distribution in the steel volume. The literature mainly describes the results of tests on hard steels, particularly bearing steels. The amount of non-metallic inclusions found in steel with a medium carbon content melted under industrial conditions is rarely presented in the literature. The tested steel was melted in an electric arc furnace and then desulfurized and argonrefined. Seven typical industrial melts were analyzed, in which ca. 75% secondary raw materials were used. The amount of non-metallic inclusions was determined by optical and extraction methods. The test results are presented using stereometric indices. Inclusions are characterized by measuring ranges. The chemical composition of steel and contents of inclusions in every melts are presented. The results are shown in graphical form. The presented analysis of the tests results on the amount and size of non-metallic inclusions can be used to assess them operational strength and durability of steel melted and refined in the desulfurization and argon refining processes.

  1. Heavy Metal Distribution in Soils near the Almalyk Mining and Smelting Industrial Area, Uzbekistan

    Institute of Scientific and Technical Information of China (English)

    Obidjon KODIROV; Nosir SHUKUROV

    2009-01-01

    The present study demonstrates distribution and chemical forms of heavy metals in soils of the AImalyk mining and smelting industrial area along five transects. The study area is located in Almalyk, Uzbekistan, where the intensification of industrial enterprises negatively impacts the environment. The distribution of 17 heavy metals (Cu, Zn, Pb, Sc, V, Cr, Co, Ni, Ga, Rb, Sr, Y, Zr, Nb,Ba, Th, and U) were studied in 21 sampling locations (21×3=63 soil samples) along five radial transects with a total length of 60 km downwind deposition gradient. Soil samples were collected from the upper layer (0-10 cm) at 4-6 km intervals. As a result of X-ray fluorescence spectrometry analyses by using X-ray fluorescence spectroscopy (XRF, Philips Analytical Ink, USA ), a significant decrease in heavy metal (Cn, Zn, Pb) deposition was found going from the source in a downwind direction. Soil samples taken from the first location (near the pollution sources) showed higher concentrations of Cu, Zn and Pb, and lower concentrations with increasing distance from the source. Obtained data showed different impact of pollution sources to heavy metal deposition and distribution in soils. The Almalyk mining and smelting complex is the major source of Pb, Zn and Cu enrichment in soils. Distribution of other trace elements does not exceed background content and suggests lithogenic background. This allowed us to divide these elements into two groups: (1) technogenic (Cu, Zn and Pb); and (2) iithogenic (Sc, V, Cr, Co,Ni, Ga, Rb, Sr, Y, Zr, Nb, Ba, Th and U) origins.

  2. Maintenance service contract model for heavy equipment in mining industry using principal agent theory

    Science.gov (United States)

    Pakpahan, Eka K. A.; Iskandar, Bermawi P.

    2015-12-01

    Mining industry is characterized by a high operational revenue, and hence high availability of heavy equipment used in mining industry is a critical factor to ensure the revenue target. To maintain high avaliability of the heavy equipment, the equipment's owner hires an agent to perform maintenance action. Contract is then used to control the relationship between the two parties involved. The traditional contracts such as fixed price, cost plus or penalty based contract studied is unable to push agent's performance to exceed target, and this in turn would lead to a sub-optimal result (revenue). This research deals with designing maintenance contract compensation schemes. The scheme should induce agent to select the highest possible maintenance effort level, thereby pushing agent's performance and achieve maximum utility for both parties involved. Principal agent theory is used as a modeling approach due to its ability to simultaneously modeled owner and agent decision making process. Compensation schemes considered in this research includes fixed price, cost sharing and revenue sharing. The optimal decision is obtained using a numerical method. The results show that if both parties are risk neutral, then there are infinite combination of fixed price, cost sharing and revenue sharing produced the same optimal solution. The combination of fixed price and cost sharing contract results in the optimal solution when the agent is risk averse, while the optimal combination of fixed price and revenue sharing contract is obtained when agent is risk averse. When both parties are risk averse, the optimal compensation scheme is a combination of fixed price, cost sharing and revenue sharing.

  3. Evaluate the viability of auditory steady state response testing for pseudohypacusic workers in the South African mining industry

    CSIR Research Space (South Africa)

    De Koker, E

    2003-07-01

    Full Text Available , it was found that the highest prevalence of pseudohypacusis (exaggerated or simulated hearing loss) has been reported among workers eligible for monetary compensation in the event of NIHL. In the South African mining industry, the occurrence of noise...

  4. Evaluation of the current practices of noise-induced hearing loss (NIHL) awareness training in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2015-01-01

    Full Text Available This study aimed to evaluate the current practices in relation to best practice criteria and make recommendations for improvements to noise-induced hearing loss (NIHL) awareness training in the South African mining industry. A survey tool based...

  5. Application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. The most important result to date is the demonstration of the special value of repetitive ERTS-1 multiband coverage for detecting previously unknown fracture lineaments despite the presence of a deep glacial overburden. The Illinois Basin is largely covered with glacial drift and few rock outcrops are present. A contribution to the geological understanding of Illinois and Indiana has been made. Analysis of ERTS-1 imagery has provided useful information to the State of Indiana concerning the surface mined lands. The contrast between healthy vegetation and bare ground as imaged by Band 7 is sharp and substantial detail can be obtained concerning the extent of disturbed lands, associated water bodies, large haul roads, and extent of mined lands revegetation. Preliminary results of analysis suggest a reasonable correlation between image-detected fractures and mine roof fall accidents for a few areas investigated. ERTS-1 applications to surface mining operations appear probable, but further investigations are required. The likelihood of applying ERTS-1 derived fracture data to improve coal mine safety in the entire Illinois Basin is suggested from studies conducted in Indiana.

  6. Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J.; Russell, O. R.; Martin, K. R. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. Mined land reclamation analysis procedures developed within the Indiana portion of the Illinois Coal Basin were independently tested in Ohio utilizing 1:80,000 scale enlargements of ERTS-1 image 1029-15361-7 (dated August 21, 1972). An area in Belmont County was selected for analysis due to the extensive surface mining and the different degrees of reclamation occurring in this area. Contour mining in this area provided the opportunity to extend techniques developed for analysis of relatively flat mining areas in Indiana to areas of rolling topography in Ohio. The analysts had no previous experience in the area. Field investigations largely confirmed office analysis results although in a few areas estimates of vegetation percentages were found to be too high. In one area this error approximated 25%. These results suggest that systematic ERTS-1 analysis in combination with selective field sampling can provide reliable vegetation percentage estimates in excess of 25% accuracy with minimum equipment investment and training. The utility of ERTS-1 for practical and reasonably reliable update of mined lands information for groups with budget limitations is suggested. Many states can benefit from low cost updates using ERTS-1 imagery from public sources.

  7. Review of data mining applications for quality assessment in manufacturing industry: support vector machines

    Directory of Open Access Journals (Sweden)

    Rostami Hamidey

    2015-01-01

    Full Text Available In many modern manufacturing industries, data that characterize the manufacturing process are electronically collected and stored in databases. Due to advances in data collection systems and analysis tools, data mining (DM has widely been applied for quality assessment (QA in manufacturing industries. In DM, the choice of technique to be used in analyzing a dataset and assessing the quality depend on the understanding of the analyst. On the other hand, with the advent of improved and efficient prediction techniques, there is a need for an analyst to know which tool performs better for a particular type of dataset. Although a few review papers have recently been published to discuss DM applications in manufacturing for QA, this paper provides an extensive review to investigate the application of a special DM technique, namely support vector machine (SVM to deal with QA problems. This review provides a comprehensive analysis of the literature from various points of view as DM concepts, data preprocessing, DM applications for each quality task, SVM preliminaries, and application results. Summary tables and figures are also provided besides to the analyses. Finally, conclusions and future research directions are provided.

  8. Adapting active noise control headsets for the mining industry: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vipac Engineers and Scientists Ltd., North Ryde, NSW (Australia)

    1996-02-01

    Noise induced hearing loss and its consequences with regard to occupational health and safety remain a major problem in the coal industry, especially underground. Australian Standards for exposure to noise in the occupational environment are being lowered from 8-hour equivalent continuous A-weighted sound pressure level of 90 dBA to 85 dBA. The most desirable solution is to treat the noise problem at source. Where noise control strategies are not feasible, the use of hearing protection devices remains the most widely used strategy for limiting the exposure to noise in the work place. This project aimed to demonstrate design specifications for ANC (Active Noise Control) Headsets for use in the coal mining industry, especially underground. Tests showed some devices benefit from a significantly improved noise attenuation performance at low frequencies due the ANC system. Using measured noise from continuous miner and the measured noise attenuation performance of one of the ANC headsets under evaluation as an example, it was demonstrated that with Active Noise Control, the overall Leq noise level was reduced from 90 dBA (with passive hearing protection only) to 77 dBA. The final part of the project was to establish a set of specifications for the manufacturers to use in developing ANC headsets for use underground. (author). 8 tabs., 7 figs., 20 refs.

  9. Study of application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

    1973-01-01

    The author has identified the following significant results. The 70mm black and white infrared photography acquired in March 1973 at an approximate scale of 1:115,000 permits the identification of areas of mine subsidence not readily evident on other films. This is largely due to the high contrast rendition of water and land by this film and the excessive surface moisture conditions prevalent in the area at the time of photography. Subsided areas consist of shallow depressions which have impounded water. Patterns with a regularity indicative of the room and pillar configuration used in subsurface coal mining are evident.

  10. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Science.gov (United States)

    Kittipongvises, Suthirat

    2015-12-01

    There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were

  11. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2015-12-01

    Full Text Available There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2 is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR, vertical roller mills (VRM, gravity pre-concentration and microwave heating technologies that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and

  12. An Empirical Study of Hybrid DEA and Grey System Theory on Analyzing Performance: A Case from Indian Mining Industry

    Directory of Open Access Journals (Sweden)

    Lai-Wang Wang

    2015-01-01

    Full Text Available India, which has long been recognized as a well-endowed nation in natural mineral resources, is a major minerals producer. According to the report of Indian Ministry of Mines 2013, Indian mining and metals sector ranked the fourth among the mineral producer countries, behind China, United States, and Russia and had in fact led the economy into recovery from the global financial crisis. Since this industry has turned into a significant issue, this paper attempts to rank the performance of 23 Indian mining and metal companies and to evaluate and measure the productivity change of these sectors during different time periods (2010–2014. Besides, the authors would like to choose one advanced model of MPI to see the performance of these companies in the past-present period and the 4-year future period (2015–2018 by using forecasting results of Grey system theory. The results revealed that from the past to future period the National Mineral Development Corporation, Hindalco Industries Limited, and Coal India always keep their highest best rankings among 23 DMUs regarding performance scores. This study contributes better insights of Indian mining industry as it is the core of the economy.

  13. DATA MINING FOR PREDICTION OF HUMAN PERFORMANCE CAPABILITY IN THE SOFTWARE-INDUSTRY

    Directory of Open Access Journals (Sweden)

    Gaurav Singh Thakur1

    2015-03-01

    Full Text Available The recruitment of new personnel is one of the most essential business processes which affect the quality of human capital within any company. It is highly essential for the companies to ensure the recruitment of right talent to maintain a competitive edge over the others in the market. However IT companies often face a problem while recruiting new people for their ongoing projects due to lack of a proper framework that defines a criteria for the selection process. In this paper we aim to develop a framework that would allow any project manager to take the right decision for selecting new talent by correlating performance parameters with the other domain-specific attributes of the candidates. Also, another important motivation behind this project is to check the validity of the selection procedure often followed by various big companies in both public and private sectors which focus only on academic scores, GPA/grades of students from colleges and other academic backgrounds. We test if such a decision will produce optimal results in the industry or is there a need for change that offers a more holistic approach to recruitment of new talent in the software companies. The scope of this work extends beyond the IT domain and a similar procedure can be adopted to develop a recruitment framework in other fields as well. Data-mining techniques provide useful information from the historical projects depending on which the hiring-manager can make decisions for recruiting high-quality workforce. This study aims to bridge this hiatus by developing a data-mining framework based on an ensemble-learning technique to refocus on the criteria for personnel selection. The results from this research clearly demonstrated that there is a need to refocus on the selection-criteria for quality objectives.

  14. Study of application of ERTS-1 imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E. (Principal Investigator); Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

    1972-01-01

    The author has identified the following significant results. Numerous fractures are identifiable on the 1:120,000 color infrared photography. Some of these fractures are in the proximity of operating open pit mines and should provide opportunities for field checking and confirmation.

  15. Numerical 2D and 3D Investigation of Non-Metallic (Glass, Carbon) Fiber Pull-Out Micromechanics 9in Concrete Matrix)

    OpenAIRE

    Khabaz, A; Krasņikovs, A; Kononova, O; Mačanovskis, A

    2010-01-01

    Short non-metallic (glass, carbon) fibre use for concrete disperse reinforcment is of particular interest, because of much higher fibre/matrix interface area value comparing to industrially produced steel fibres.

  16. [Cardiac deaths in hard coal-mining industry as an indicator of efficiency of occupational medicine services].

    Science.gov (United States)

    Skowronek, Rafał; Chowaniec, Czesław; Kowalska, Anna

    2011-01-01

    Deaths in hard-coal mining industry can be divided into: accidental (usually of a single character) and non-accidental-intentional (homicide, suicide) and natural (with a pathological background, 'without external factors'). The main cause of natural deaths is myocardial infarction (MI). Its risk is increased by environmental factors in working place, unhealthy life style, cigarette smoking and alcohol drinking, which is often an attempt at coping with chronic stress, so proper prevention, qualification and periodic examination of workers is indispensable. The aim of the study is to analyze cases of miners' cardiac deaths investigated in Department of Forensic Medicine in Katowice and the number of natural deaths in hard-coal mines in the years 1999-2010. There were 298 accidental and 122 natural deaths, the latter showing an increasing tendency in the years 2002-2004, 2006, 2008 and 2010. Natural deaths--in 95% sudden cardiac deaths--constituted 29% of all deaths in hard-coal mining industry. Autopsies supplemented by histopathological investigations often revealed advanced atherosclerosis and coronary heart disease, which should disqualify a candidate from working underground. A high number of natural deaths in hard-coal mining industry and morphological post mortem assessment of victims indicate insufficiency of occupational medicine services. We propose an improvement of its quality and a higher frequency of periodic examinations of workers (especially in groups with the highest risk of MI), as well as courses of Basic Life Support (BLS). Forensic medicine may be socially useful in assessing the efficiency of occupational medicine services in mining industry.

  17. The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population

    Science.gov (United States)

    James, Carole; Wiggers, John; Lewin, Terry; Inder, Kerry; Perkins, David; Handley, Tonelle

    2017-01-01

    Background Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining) has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics. Methods A cross-sectional study was conducted among employees (n = 1457) across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements). Participants completed measures of psychological distress (K10+) and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics). Results Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers) and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems. Conclusion This is the first study to examine the characteristics associated with mental health problems in the

  18. NON-METALLIC IMPURITIES AND FORMING OF THE STRUCTURE OF THE MODIFIED HIGH-MANGANESE STEEL

    Directory of Open Access Journals (Sweden)

    A. I. Garost

    2006-01-01

    Full Text Available The composition and morphology of chemical associations (non-metallic impurities and other ‘‘secondary” phases at modification of high-manganese steel by nitrogen and nitrideforming elements (vanadium are investigated. The optimal compositions of steel for production of castings are offered. The technology of the steel wear-resistance modification by vanadium of waste of industrial enterprises is worked out.

  19. Beyond the biomedical and behavioural: towards an integrated approach to HIV prevention in the southern African mining industry.

    Science.gov (United States)

    Campbell, C; Williams, B

    1999-06-01

    While migrant labour is believed to play an important role in the dynamics of HIV-transmission in many of the countries of southern Africa, little has been written about the way in which HIV/AIDS has been dealt with in the industrial settings in which many migrant workers are employed. This paper takes the gold mining industry in the countries of the Southern African Development Community (SADC) as a case study. While many mines made substantial efforts to establish HIV-prevention programmes relatively early on in the epidemic, these appear to have had little impact. The paper analyses the response of key players in the mining industry, in the interests of highlighting the limitations of the way in which both managements and trade unions have responded to HIV. It will be argued that the energy that has been devoted either to biomedical or behavioural prevention programmes or to human rights issues has served to obscure the social and developmental dimensions of HIV-transmission. This argument is supported by means of a case study which seeks to highlight the complexity of the dynamics of disease transmission in this context, a complexity which is not reflected in individualistic responses. An account is given of a new intervention which seeks to develop a more integrated approach to HIV management in an industrial setting.

  20. Widespread waterborne pollution in central Swedish lakes and the Baltic Sea from pre-industrial mining and metallurgy.

    Science.gov (United States)

    Bindler, Richard; Renberg, Ingemar; Rydberg, Johan; Andrén, Thomas

    2009-07-01

    Metal pollution is viewed as a modern problem that began in the 19th century and accelerated through the 20th century; however, in many parts of the globe this view is wrong. Here, we studied past waterborne metal pollution in lake sediments from the Bergslagen region in central Sweden, one of many historically important mining regions in Europe. With a focus on lead (including isotopes), we trace mining impacts from a local scale, through a 120-km-long river system draining into Mälaren--Sweden's third largest lake, and finally also the Baltic Sea. Comparison of sediment and peat records shows that pollution from Swedish mining was largely waterborne and that atmospheric deposition was dominated by long-range transport from other regions. Swedish ore lead is detectable from the 10th century, but the greatest impact occurred during the 16th-18th centuries with improvements occurring over recent centuries, i.e., historical pollution > modern industrial pollution.

  1. Trace elements in the Fontinalis antipyretica from rivers receiving sewage of lignite and glass sand mining industry.

    Science.gov (United States)

    Kosior, Grzegorz; Samecka-Cymerman, Aleksandra; Kolon, Krzysztof; Brudzińska-Kosior, Anna; Bena, Waldemar; Kempers, Alexander J

    2015-07-01

    Intensive lignite and glass sand mining and industrial processing release waste which may contain elements hazardous to the aquatic ecosystem and constitute a potential risk to human health. Therefore, their levels must be carefully controlled. As a result, we examined the effects of sewage on the aquatic Fontinalis antipyretica moss in the Nysa Łużycka (lignite industry) and the Kwisa Rivers (glass sand industry). The Nysa Łużycka and the Kwisa Rivers appeared to be heavily polluted with As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn, which were reflected in the extremely high concentration of these elements in F. antipyretica along the studied watercourses. In the Nysa Łużycka, trace element composition in the moss species is affected by lignite industry with accumulation in its tissues of the highest concentrations of Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, while samples from the Kwisa sites influenced by glass sand industry revealed the highest concentrations of As, V and Fe. The principal component and classification analysis classifies the concentration of elements in the aquatic F. antipyretica moss, thus enabling the differentiation of sources of water pollution in areas affected by mining industry.

  2. Information system for preserving culture heritage in areas affected by heavy industry and mining

    Science.gov (United States)

    Pacina, Jan; Kopecký, Jiří; Bedrníková, Lenka; Handrychová, Barbora; Švarcová, Martina; Holá, Markéta; Pončíková, Edita

    2014-05-01

    The natural development of the Ústí region (North-West Bohemia, the Czech Republic) has been affected by the human activity during the past hundred years. The heavy industrialization and the brown coal mining have completely changed the land-use in the region. The open-pit coal mines are completely destroying the surrounding landscape, including settlement, communications, hydrological network and the over-all natural development of the region. The other factor affecting the natural development of the landscape, land-use and settlement was the political situation in 1945 (end of the 2nd World War) when the borderland was depopulated. All these factors caused vanishing of more than two hundreds of colonies, villages and towns during this period of time. The task of this project is to prepare and offer for public use a comprehensive information system preserving the cultural heritage in the form of processed old maps, aerial imagery, land-use and georelief reconstructions, local studies, text and photo documents covering the extinct landscape and settlement. Wide range of various maps was used for this area - Müller's map of Bohemia (ca. 1720) followed by the 1st, 2nd and 3rd Military survey of Habsburg empire (1792, 1894, 1938), maps of Stabile cadaster (ca. 1840) and State map derived in the scale 1:5000 (1953, 1972, 1981). All the maps were processed, georeferenced, hand digitized and are further used as base layers for visualization and analysis. The historical aerial imagery was processed in standard ways of photogrammetry and is covering the year 1938, 1953 and the current state. The other important task covered by this project is the georelief reconstruction. We use the old maps and aerial imagery to reconstruct the complete time-line of the georelief development. This time-line is covering the period since 1938 until now. The derived digital terrain models and further on analyzed and printed on a 3D printer. Other reconstruction task are performed using

  3. OVERVIEW ON A NEW MODEL OF CALCULATION OF COSTRILOR IN MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    DINA IONELA-CLAUDIA

    2015-03-01

    Full Text Available The methods of calculation used in the coal mining industry entities (global and per-phase, non-postoperative, and also as the main drawback of applying their lack of foresight and readiness. This makes the information in connection with the production process do not reach decision makers in time for them to take the most appropriate decision, on the one hand, and on the other hand, do not have the prospect of future development of the production process, so management accounting does not fulfill its role of managerial accounting. In this vision, I propose the establishment of management of the production process that uses as its objective "the cost". Target calculation system is expected to be made up of a set of methods, techniques and means with which to accurately predict and programme production costs, to calculate the cost of an hour of activity, to register and to consider pre-emptive, operative and post operative expenses compared to the deviations of their standard or normed and, on this basisto determine the actual cost of production at the end of each cycle of activity

  4. Laser cladding of tungsten carbides (Spherotene) hardfacing alloys for the mining and mineral industry

    Energy Technology Data Exchange (ETDEWEB)

    Amado, J.M. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain); Tobar, M.J. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain)], E-mail: cote@udc.es; Alvarez, J.C.; Lamas, J.; Yanez, A. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain)

    2009-03-01

    The abrasive nature of the mechanical processes involved in mining and mineral industry often causes significant wear to the associated equipment and derives non-negligible economic costs. One of the possible strategies to improve the wear resistance of the various components is the deposition of hardfacing layers on the bulk parts. The use of high power lasers for hardfacing (laser cladding) has attracted a great attention in the last decade as an alternative to other more standard methods (arc welding, oxy-fuel gas welding, thermal spraying). In laser cladding the hardfacing material is used in powder form. For high hardness applications Ni-, Co- or Fe-based alloys containing hard phase carbides at different ratios are commonly used. Tungsten carbides (WC) can provide coating hardness well above 1000 HV (Vickers). In this respect, commercially available WC powders normally contain spherical micro-particles consisting of crushed WC agglomerates. Some years ago, Spherotene powders consisting of spherical-fused monocrystaline WC particles, being extremely hard, between 1800 and 3000 HV, were patented. Very recently, mixtures of Ni-based alloy with Spherotene powders optimized for laser processing were presented (Technolase). These mixtures have been used in our study. Laser cladding tests with these powders were performed on low carbon steel (C25) substrates, and results in terms of microstructure and hardness will be discussed.

  5. Laser cladding of tungsten carbides (Spherotene ®) hardfacing alloys for the mining and mineral industry

    Science.gov (United States)

    Amado, J. M.; Tobar, M. J.; Alvarez, J. C.; Lamas, J.; Yáñez, A.

    2009-03-01

    The abrasive nature of the mechanical processes involved in mining and mineral industry often causes significant wear to the associated equipment and derives non-negligible economic costs. One of the possible strategies to improve the wear resistance of the various components is the deposition of hardfacing layers on the bulk parts. The use of high power lasers for hardfacing (laser cladding) has attracted a great attention in the last decade as an alternative to other more standard methods (arc welding, oxy-fuel gas welding, thermal spraying). In laser cladding the hardfacing material is used in powder form. For high hardness applications Ni-, Co- or Fe-based alloys containing hard phase carbides at different ratios are commonly used. Tungsten carbides (WC) can provide coating hardness well above 1000 HV (Vickers). In this respect, commercially available WC powders normally contain spherical micro-particles consisting of crushed WC agglomerates. Some years ago, Spherotene ® powders consisting of spherical-fused monocrystaline WC particles, being extremely hard, between 1800 and 3000 HV, were patented. Very recently, mixtures of Ni-based alloy with Spherotene powders optimized for laser processing were presented (Technolase ®). These mixtures have been used in our study. Laser cladding tests with these powders were performed on low carbon steel (C25) substrates, and results in terms of microstructure and hardness will be discussed.

  6. Polonium content in sediments and other solid tailings generated by mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewska, Izabela; Michalik, Boguslaw [Silesian Centre for Environmental Radioactivity, Central Mining Institute, 40-166 Katowice, Pl. Gwarkow 1 (Poland)

    2014-07-01

    All legal limits or recommendations concerning NORM include only primordial radionuclides and secular equilibrium state among all decay products is assumed. This is not valid for a majority of residues from NORM industry where activity concentration of progenies can substantially differ each other. Upper Silesia Coal Basin is a unique region where mining activity is continuously done over longer period of time and this include discharging of radium-bearing water to environment and creating huge amount of solid wastes where at the beginning radium is the most dominant radionuclide. With time other daughter products start to build up and actual exposure to radiation is changing. One of them is polonium that with regard to its chemical properties can be easily accumulated in non-human biota resulting in the increase of radiation exposure. In our work we focused attention on sediments where content of {sup 210}Po was determined by chemical separation followed by alpha spectrometry. Chemical preparation involves organic matter destruction and dissolution of the sample itself (if possible). In our research we employed wet digestion by means of mixture of concentrated acids: HNO{sub 3}, HClO{sub 4}, HCl. Later on polonium was spontaneously deposited onto silver disc and measured with use of alpha spectrometry. In this article we want to show results of our study and as well to present some conclusions concerning changes in radiation risk assessment when actual concentration of polonium is taken into consideration. (authors)

  7. study of solid-liquid flow regimes in mining industry using gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Salgado, Cesar M.; Brandao, Luis E.B.; Nunes, Rogerio C.; Nascimento, Ana C. de H., E-mail: otero@ien.gov.br, E-mail: brandao@ien.gov.br, E-mail: chaffin@ien.gov.br, E-mail: acris@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Salgado, William L., E-mail: william.otero@hotmail.com [Instituto Federal do Rio de Janeiro (IFRJ), Nilopolis, RJ (Brazil)

    2013-07-01

    One of the most promising areas in the mining industry is the development of devices for measuring solid mass flowrate in pipelines, mainly in transportation of ore. These units are composed of interconnected pipes where transport of the material is accomplished by pumps capable of driving the ore pellets using water. One of the problems inherent in these systems is the stratification if a critical velocity is reached, the ore pellets begin to sediment at the bottom of the pipe and it may block the system. The solid phase displacement behavior depends on a number of factors (water flowrate, density, pipe diameter, average size of the pellet) which makes the flow regime knowledge essential to the appropriate operation of the system. An apparatus to evaluate the stratification level through of particle (ore pellets) spatial distributions inside the pipe is important because it increases the safety condition of pumping and transportation of solid phase. Therefore, this work presents a study to optimize the geometrical parameters for the identification of a possible stratification of the solid phase inside a pipeline. The detection system uses different NaI(Tl) detectors and gamma ray sources (fan beam geometry), adequately positioned in order to calculate transmitted and scattered beams. Additionally, theoretical models for different flow regimes (homogeneous and stratified) have been developed using MCNP-X mathematical code. (author)

  8. Future needs for improvement of noise-induced hearing loss awareness training and hearing protection device practices in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2012-08-01

    Full Text Available Institute of Mining and Metallurgy MineSAFE 2012 Anita Edwards Page 1 FUTURE NEEDS FOR IMPROVEMENT OF NOISE-INDUCED HEARING LOSS AWARENESS TRAINING AND HEARING PROTECTION DEVICE PRATICES IN THE SOUTH AFRICAN MINING INDUSTRY Authors: A... training for workers about the risks associated with noise exposure that also motivates and trains them to use Hearing Protection Devices (HPDs) in order to prevent hearing loss. The high prevalence of noise- induced hearing loss (NIHL) amongst South...

  9. Trophic priorities of millipedes (Diplopoda in process of rehabilitation of the territories disturbed by mining industry

    Directory of Open Access Journals (Sweden)

    Y. L. Kulbachko

    2012-07-01

    Full Text Available The food selectivity of millipedes (Diplopoda was studied in different variants of mine spoils and chernozem fillings applied as topsoil. It was found that the ordinary chernozem fillings determines the formation of food priorities increasingly in comparison with the mine spoil. There are shown statistically significant differences between millipeds food priorities depending on the proposed feed: litter leaves of trees (Acer platanoides, Robinia pseudoacacia, Juniperus virginiana used in forest revegetation of mining lands.

  10. Housing and occupational health and safety in the South African mining industry, part 2

    CSIR Research Space (South Africa)

    Lewis, P

    2003-12-01

    Full Text Available housing strategy of mines and employment trend ...........................................................................................................................75 TABLE 5.1.2.2.1 Minimum sizes for units in hostel upgrading... of five years (for example to one per room in ten years). This would happen concurrently with (and facilitated by) the "exodus" already occurring from the mine hostels. ? For mines with a lifespan of ten years or more, a minimum of a further 5...

  11. Extraction and haulage technology in the Namibian diamond mining industry; Gewinnungs- und Foerdertechnik im Diamantbergbau Namibias

    Energy Technology Data Exchange (ETDEWEB)

    Mischo, Helmut [Namibia' s Univ. of Science and Technology, Windhuk (NM). Lehrstuhl fuer Betriebsmittel und bergbauliche Verfahrenslehre

    2011-01-15

    Fore more than 100 years, diamonds have been mined in Namibia in the Sperrgebiet and along the coast. With the depletion of the on-shore deposits, all mining activities will soon move to coastal and off-shore operations, which are of high importance already today. The paper provides a detailed overview over the applied mining and conveying technology in the different on- and off-shore deposits. (orig.)

  12. [Justifying genetic and immune markers of efficiency and sensitivity under combined exposure to risk factors in mining industry workers].

    Science.gov (United States)

    Dolgikh, O V; Zaitseva, N V; Krivtsov, A V; Gorshkova, K G; Lanin, D V; Bubnova, O A; Dianova, D G; Lykhina, T S; Vdovina, N A

    2014-01-01

    The authors evaluated and justified immunologic and genetic markers under combined exposure to risk factors in mining industry workers. Analysis covered polymorphism features of 29 genes with variant alleles possibly participating in occupationally conditioned diseases formation and serving as sensitivity markers of these diseases risk. The genes association selected demonstrates reliably changed polymorphism vs. the reference group (SOD2 superoxidedismutase gene, ANKK1 dophamine receptor gene, SULT1A1 sulphtransaminase gene, MTHFR methylene tetrahydrofolate reductase gene, VEGF endothelial growth factor gene, TNF-alpha tumor necrosis factor gene). Under combined exposure to occupational hazards (sylvinite dust, noise) in mining industry, this association can serve as adequate marking complex of sensitivity to development of occupationally conditioned diseases. Increased-production of immune cytokine regulation markers: tumor necrosis factor and vascular endothelial growth factor. Genes SOD2, ANKK1, SULT1A1, VEGF, TNFalpha are recommended as sensitivity markers, and the coded cytokines (tumor necrosis factor and endothelial growth factor) are proposed as effect markers in evaluation of health risk for workers in mining industry.

  13. Study on the Optimization of the Industrial Structure in a Mining Economic Region: Taking Carbon Emissions as a Restriction

    Directory of Open Access Journals (Sweden)

    Li Li

    2015-04-01

    Full Text Available In the first decade of the 21st century, as a typical coal province and mining economic region, Shanxi province made a great contribution to the national economic construction and reform. At the same time, coal mining has caused serious damage to the ecological environment, excessive use of resources, the deterioration of the ecological environment and a decline in the sustainable development capacity. Overreliance on a resource-based economy leads to problems such as a poorly developed economy and a single industrial structure. In this context, Shanxi province has to take actions to transform its industrial structure into a low-carbon development model as soon as possible. This paper measures the values of the consumption coefficients of capital investments, electric power and CO2 emissions by establishing a Grey Model (1, 1 using the data from 2007 to 2011 and designing the optimization scheme of the three industrial structures from 2015 to 2020 by establishing a grey dynamic linear programming model for Shanxi province. The results show that the industrial structure in Shanxi province needs to be improved. It is revealed that the proportion of three industries in Shanxi province should change from 6:46:48 in 2015 to 6:41:54 in 2020. At the same time, among the seven largest sectors in terms of carbon emissions in the secondary industry, Shanxi government may continue to promote the development of the coal-bed methane and the coal chemical industry in the coal industry, while the other six sectors should be limited.

  14. Principles of adoption of the successful environmental practices used in developed countries into mining industry in developing countries.

    Science.gov (United States)

    Masaitis, Alexandra

    2013-04-01

    The successful implementation of the environmental practices in the mining industry is of a paramount importance, as it not only prevents both local and trans-border pollution but also guarantees clean and healthy environment for the people regardless of their place of habitation. It is especially important to encourage the progress of the environmental practices implementation in developing countries because such countries have resource-oriented economy based on exploitation of nonrenewable resources. Poor environmental practices in developing countries will lead to local environmental crises that could eventually spill into surrounding countries including the most economically advanced. This abstract is a summary of a two-year research project attempted (1) to determine deficiencies of the mining sector ecological practices in developing countries and (2) to suggest substitute practices from developed countries that could be adapted to the developing countries reality. The following research methods were used: 1. The method of the system analysis, where the system is an interaction of the sets of environmental practices with the global mining sector; 2. The comparative method of inquiry, where the comparison was made between environmental protection practices as implemented in the US (developed country) and the developing countries such as RF, Mongolia mining sectors; 3. Quantitative date analysis, where date was collected from "The collection of statistic data", Russian Geographic Society Annual reports, the US EPA open reports, and the USGS Reports; The following results were obtained: Identified the systemic crisis of the ecological environmental policies and practices in the mining sector in developing countries based on the exploitation of nonrenewable resources, absence of the ecological interest by the mining companies that lack mechanisms of environmental and public health protection, the lack of insurance policy, the lack of risk assistance, and in the

  15. Motion behavior of non-metallic particles under high frequency magnetic field

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhong-tao; GUO Qing-tao; YU Feng-yun; LI Jie; ZHANG Jian; LI Ting-ju

    2009-01-01

    Non-metallic particles, especially alumina, are the main inclusions in aluminum and its alloys. Numerical simulation and the corresponding experiments were carried out to study the motion behavior of alumina particles in commercial pure aluminum under high frequency magnetic field. At the meantime, multi-pipe experiment was also done to discuss the prospect of continuous elimination of non-metallic particles under high frequency magnetic field. It is shown that: 1) results of numerical simulation are in good agreement with the experimental results, which certificates the rationality of the simulation model; 2) when the intensity of high frequency magnetic field is 0.06 T, the 30 μm alumina particles in melt inner could migrate to the edge and be removed within 2 s; 3) multi-pipe elimination of alumina particles under high frequency magnetic field is also effective and has a good prospect in industrial application.

  16. The contribution of new technology to improved environmental performance in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, A.S.; Hume, H.R. [Chamber of Mines of South Africa, Marshalltown (South Africa)

    1997-10-01

    The contribution of new technology (and of technology under development) to improved environmental performance in mining, mineral processing and disposal of mining wastes is described. While the emphasis of the article is on development in South Africa, the examples are of more general interest and application. 1 ref., 1 fig.

  17. [Comparative evaluation of health state in workers of metal mining industry].

    Science.gov (United States)

    Saarkoppel', L M

    2007-01-01

    The article covers up-to-date state of work conditions, occupational and general morbidity in workers of metal mining enterprises situated in contrast climate regions of Russian Federation. The authors revealed peculiarities of functional state in metal mining workers of Arctic and European Russia.

  18. The Development and Prospect of China’s Lead Zinc Mining Industry

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>30 provinces in China almost have lead zinc resources,relatively concentrated in 5 mining areas of Lanping and Qingling in the west of Yunnan,Qilian,Nanling,Chuandian as well as 5 major mining areas in Langshan,which are areas rich in lead zinc resources in China.Lead resources are mainly in Yunnan,Guangdong,

  19. [Improving of underground work technology at mining facilities and problems of industrial hygiene].

    Science.gov (United States)

    Kaptsov, V A; Chebotarev, A G

    1993-10-01

    Mechanization of underground works in mines has induced increased air content of dust and gas, a rise in noise and vibration, microclimate deterioration. The prevalence of occupational pulmonary diseases in mines has increased. Further efforts to improved the situation should be aimed at improvement of requirements to hygienic characteristics of the equipment, setting up of adequate conditioning and health protection measures.

  20. Le lexique anglais-francais de l'industrie miniere de l'Office de la langue francaise (The English-French Lexicon of the Mining Industry prepared by the Office of the French Language)

    Science.gov (United States)

    Rousseau, Louis-Jean

    1974-01-01

    This article describes research methods involved in compiling a lexicon of terms used in the mining industry. This consisted mainly in contrasting terms found in dictionaries with actual usage in spoken and written language. (Text is in French) (AM)

  1. Looking ahead to significant improvements in mining safety and health through innovative research and effective diffusion into the industry

    Institute of Scientific and Technical Information of China (English)

    Jeffery L. Kohler

    2015-01-01

    Mining safety and health improvements over the past decades are remarkable by many metrics, and yet the expectation of society, and the goal of the mining industry, is zero harm. If we examine the underlying enablers for the significant gains that have been achieved, the key role that research to help understand the causes of problems and to develop lasting solutions is clear. Many of the remaining challenges have been resistant to solutions by various approaches. Some, such as fatalities and injuries from ground con-trol or powered haulage are prominent year after year. Different approaches are indicated and new solu-tions will be required if we are to achieve a goal of zero harm. These will originate with research, but into which topics, and what are some of these different approaches? This paper examines the current state of mine safety in the United States and highlights areas of significant opportunity for research that will lead to solutions. The likely direction of research that will enable realization of the ‘zero harm’ goal is described in terms of evolutionary and revolutionary approaches. Both are important, but the author’s view is that some of the largest gains will be made with trans-disciplinary approaches that break from the past. Topical areas of research are suggested and several research questions are given to illustrate the direction of future research in mining safety and health.

  2. An index for drought induced financial risk in the mining industry

    Science.gov (United States)

    Bonnafous, L.; Lall, U.; Siegel, J.

    2017-02-01

    Water scarcity has emerged as a potential risk for mining operations. High capital spending for desalination and water conflicts leading to asset stranding have recently occurred. Investors in mining companies are interested in the exposure to such risks across portfolios of mining assets (whether the practical at-site consequences are foregone production, higher OPEX and CAPEX and ensuing lost revenues, or asset-stranding). In this paper, an index of the potential financial exposure of a portfolio is developed and its application is illustrated. Since the likely loss at each mine is hard to estimate a priori, one needs a proxy for potential loss. The index considers drought duration, severity and frequency (defined by a return-level in years) at each mining asset, and provides a measure of financial exposure through weighing of production or Net Asset Value. Changes in human needs are not considered, but are relevant, and could be incorporated if global data on mine and other water use were available at the appropriate resolution. Potential for contemporaneous drought incidence across sites in a portfolio is considered specifically. Through an appropriate choice of drought thresholds, an analyst can customize a scenario to assess potential losses in production value or profits, or whether conflicts could emerge that would lead to stranded assets or capital expenditure to secure alternate water supplies. Global climate data sets that allow a customized development of such an index are identified, and selected mining company portfolios are scored as to the risk associated with one publicly available drought index.

  3. Exploration and Mining Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-09-01

    This Exploration and Mining Technology Roadmap represents the third roadmap for the Mining Industry of the Future. It is based upon the results of the Exploration and Mining Roadmap Workshop held May 10 ñ 11, 2001.

  4. Awareness training and hearing protection devices: Current practices in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, A

    2012-09-01

    Full Text Available stream_source_info Edwards4_2012.pdf.txt stream_content_type text/plain stream_size 12573 Content-Encoding ISO-8859-1 stream_name Edwards4_2012.pdf.txt Content-Type text/plain; charset=ISO-8859-1 1 Mine Health... SIM11-05-01 Conducted during 2011 2 Acknowledgements Lindiwe Zungu UNISA Norman Khoza CSIR Lesedi Milanzi CSIR Sophi Letsoalo CSIR ? Mine Health and Safety Council for funding ? Mr. Navin Singh Chief Research Operations Manager ? Mines...

  5. Investigation into slipping and falling accidents and materials handling in the South African mining industry.

    CSIR Research Space (South Africa)

    Schutte, PC

    2003-03-01

    Full Text Available was conducted at a gold mine, a colliery and a quarry to establish current manual materials handling practices. This included walk-through observational surveys of the work facilities to observe obvious ergonomics-related risk factors....

  6. Using MSD prevention for cultural change in mining: Queensland Government/Anglo Coal Industry partnership.

    Science.gov (United States)

    Tilbury, Trudy; Sanderson, Liz

    2012-01-01

    Queensland Mining has a strong focus on safety performance, but risk management of health, including Musculoskeletal Disorders (MSDs) continues to have a lower priority. The reliance on individual screening of workers and lower level approaches such as manual handling training is part of the coal mining 'culture'. Initiatives such as the New South Wales and Queensland Mining joint project to develop good practice guidance for mining has allowed for a more consistent message on participatory ergonomics and prevention of MSD. An evidence based practice approach, including the introduction of participatory ergonomics and safe design principles, was proposed to Anglo American Coal operations in Queensland. The project consisted of a skills analysis of current health personnel, design of a facilitated participatory ergonomics training program, site visits to identify good practice and champions, and a graduated mentoring program for health personnel. Early results demonstrate a number of sites are benefiting from site taskforces with a focus on positive performance outcomes.

  7. The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

    National Research Council Canada - National Science Library

    Gerui Li; Yalin Lei; Jianping Ge; Sanmang Wu

    2017-01-01

    .... The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too...

  8. Estimated use of explosives in the mining industries of Algeria, Iran, Iraq, and Libya

    Energy Technology Data Exchange (ETDEWEB)

    Wilburn, D.R.; Russell, J.A.; Bleiwas, D.I. [and others

    1995-09-01

    This work was performed under Memorandum of Agreement B291534 Between the Lawrence Livermore National Laboratory (LLNL) and the United States Bureau of Mines. The Bureau of Mines authors are members of the Minerals Availability Field Office (MAFO) in Denver, CO, which uses an extensive network of information sources to develop and maintain the Minerals Availability database concerning mining and minerals properties worldwide. This study was initiated and directed by F. Heuze at LLNL. A previous study on the same subject had been commissioned by LLNL from the Mining Journal Research Services (MJRS) in London ,UK. Its results were integrated into this report. MJRS is shown as one of the numerous sources which were used for this work. All sources are listed in the report. This document is arranged in four sections, one for each country, in alphabetical order. Thie outline is the same for each country.

  9. Sustainability communication in the mining industry:a pre-study

    OpenAIRE

    Nilsson, Anders; Sandström, Johan; Lind, Thomas

    2013-01-01

    This report is based on a pre‐study aiming to provide an overview of what andhow the largest mining companies, internationally and in Sweden, communicate in terms of sustainability on their websites. The report presents a broad understanding of what large mining companies ‘say’ when it comes to sustainability. Conceptually, the study draws on writings in the areas of organizational communication, institutional theory and sustainability accounting. Methodologically, the study is based on quali...

  10. Computer science in the coal mining industry of the Peoples Republic of China

    Energy Technology Data Exchange (ETDEWEB)

    Blaszke, J.; Czudaj, J.; Mazurek, A.

    1987-10-01

    Reports on a visit of Polish designers from the Chief Mine Planning and Design Office in Katowice to China. Describes the application of a surface method of determining deposit structure, presented by Chinese specialists from the Chief Coal Objects Planning and Design Office in Peking. In 1986 a group of 220 specialists was formed in China to develop computerization for mine design purposes. There are 29 mine design offices in China employing from 200 to 1500 (Shenjan) specialists. Describes the Xinglongzhuang mine designed by the Shandong office. The mine has been in operation since 1981 producing 3 Mt coal annually from a deposit of estimated 800 Mt. An 8.6 m thick seam at 400 m depth is exploited in three slices. Eight thousand employees work in the mine. The production cost is 22 Yuan/t and the selling price 32 Yuan/t; the price for cleaned coal is 60 Yuan/t of coal with a calorific value of 6,800 kcal/kg. The dispatch equipment and computer hardware introduced there recently are discussed. Management and dispatch routines are characterized. Total annual hard coal production in China is 850 Mt. 2 refs.

  11. Proceedings of the 14. international symposium on mine planning and equipment selection (MPES) 2005 and the 5. international conference on computer applications in the minerals industries (CAMI 2005). CD ed.

    Energy Technology Data Exchange (ETDEWEB)

    Singhal, R.J. [Government of Canada, Ottawa, ON (Canada)]|[Laval Univ., Ste-Foy, PQ (Canada). Dept. of Mining, Metallurgical and Materials Engineering]|[International Journal of Surface Mining, Reclamation and Environment, Calgary, AB (Canada); Fytas, K. [Laval Univ., Ste-Foy, PQ (Canada). Dept. of Mining, Metallurgical and Materials Engineering; Chiwetelu, C. [Government of Canada, Ottawa, ON (Canada)] (eds.)

    2005-07-01

    This conference provided a forum to discuss leading and emerging technologies in the field of mining, mine planning and computer applications in the minerals industries. Participants from government, industry and academia from more than 15 countries contributed to the proceedings which will be of interest to engineers, scientists, consultants and government personnel responsible for the development and application of innovative technologies in the minerals industries. The conference contributes to the development of high-tech methods and technologies for various segments of the mining and processing industries. The session on coal mining technologies addressed issues associated with process equipment and quality control; open pit mine planning, design, and productivity gains; underground mine planning; drilling, blasting and excavation engineering; mining equipment selection, automation and information technology; mine maintenance and production management; e-maintenance, e-diagnostics, and prognostics; tunneling and other excavation equipment; case histories from coal mining, industrial minerals and metalliferous mining; cost effective methods of mine reclamation, mine closure and waste disposal; advances in mine design, mine optimization and reclamation planning technologies. The session on mine equipment focused on design, selection, and real-time health and performance monitoring; mine and machine automation; and GIS, GPS, telecommunications, artificial intelligence, and Internet application. The final session on rock mechanics and geotechnical applications focused on underground and surface mine stability, groundwater, tailings and waste disposal; computer simulation; real-time mine management systems; and computer applications in mining education. The conference featured 126 presentations of which 18 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  12. 非金属矿物在医药行业的应用与前景%Medicinal Application and Prospect of Non-metallic Mineral

    Institute of Scientific and Technical Information of China (English)

    鲍康德; 周春晖

    2012-01-01

    Deep procession of non-metallic mineral and application on bio-/medicinal area is a new high-technical industry. This paper summarizes the appl ication history and status in quo of non-metallic minerals in pharmaceutical industry; identification, classification and development tendency of non-metallic minerals for pharmaceutical use. The focus is to introduce the development history of non-metallic minerals for pharmaceutical use, and explore the application prospect of non-metallic minerals in pharmaceutical industry, so as to provide theory basis for sufficiently exploring the potential of non-metallic minerals.%非金属矿物深加工并被用于生物医药领域系高新技术产业.本文综述了非金属矿物的医药应用历史、现状;药用非金属矿物的鉴别、分类和发展趋势.重点介绍了非金属矿物的药用开发历程,并展望了非金属矿物在医药行业的应用前景,以期为充分发掘非金属矿物的潜能提供理论指导.

  13. A RISK MANAGEMENT METHODOLOGY FOR NON-METALLIC PROCESS EQUIPMENT

    Directory of Open Access Journals (Sweden)

    J.J. Viviers

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Many companies in South Africa have implemented the risk-based inspection (RBI methodology as a maintenance strategy. The risk involved in operating a piece of equipment, past history, non-destructive examination techniques, failure modes, and many other aspects determine the frequency of inspections required to meet legislation. The main purpose of the RBI methodology is to prevent failures of process equipment. The methodology for risk-based inspection for metal equipment is well-established and has been proven in industry, becoming the norm nationally and internationally. However, it is not possible to apply all the techniques to nonmetallic equipment owing to vast differences between the two types of materials. This paper discusses the results of data gathered on the RBI methodology for nonmetallic equipment, and proposes a risk-based model that can be used to perform a risk assessment for non-metallic equipment in a process plant. The risk assessment can be used to formulate the next inspection interval for the asset.

    AFRIKAANSE OPSOMMING: Verskeie maatskappye in Suid-Afrika het reeds die metodologie van risikogebaseeerde inspeksie (RBI geïmplementeer as deel van ‘n omvattende instandhoudingstrategie. Die risiko betrokke by ‘n fisiese item, bedryfsgeskiedenis, nie-vernietigende toetstegnieke, falingsmodusse, en vele ander aspekte bepaal die frekwensie van inspeksies wat benodig word om aan wetlike vereistes te voldoen. Die hoofdoel van die risiko-gebaseerde metodologie is om faling van prosestoerusting te verhinder. Die metodologie vir risiko-gebaseerde inspeksie van metaaltoerusting is goed bekend en word suksesvol toegepas in die industrie. Dis is egter nie moontlik om al die tegnieke toe te pas op nie-metaaltoerusting nie weens die groot verskeidenheid van materiaaltipes. Hierdie artikel bespreek die data wat ingewin is op die risiko-gebaseerde metodologie vir nie-metaaltipeprosestoerusting, en stel

  14. Biodiversity and phylogenetic analysis of culturable bacteria indigenous to Khewra salt mine of pakistan and their industrial importance.

    Science.gov (United States)

    Akhtar, Nasrin; Ghauri, Muhammad A; Iqbal, Aamira; Anwar, Munir A; Akhtar, Kalsoom

    2008-01-01

    Culturable bacterial biodiversity and industrial importance of the isolates indigenous to Khewra salt mine, Pakistan was assessed. PCR Amplification of 16S rDNA of isolates was carried out by using universal primers FD1 and rP1and products were sequenced commercially. These gene sequences were compared with other gene sequences in the GenBank databases to find the closely related sequences. The alignment of these sequences with sequences available from GenBank database was carried out to construct a phylogenetic tree for these bacteria. These genes were deposited to GenBank and accession numbers were obtained. Most of the isolates belonged to different species of genus Bacillus, sharing 92-99% 16S rDNA identity with the respective type strain. Other isolates had close similarities with Escherichia coli, Staphylococcus arlettae and Staphylococcus gallinarum with 97%, 98% and 99% 16S rDNA similarity respectively. The abilities of isolates to produce industrial enzymes (amylase, carboxymethylcellulase, xylanase, cellulase and protease) were checked. All isolates were tested against starch, carboxymethylcellulose (CMC), xylane, cellulose, and casein degradation in plate assays. BPT-5, 11,18,19 and 25 indicated the production of copious amounts of carbohydrates and protein degrading enzymes. Based on this study it can be concluded that Khewra salt mine is populated with diverse bacterial groups, which are potential source of industrial enzymes for commercial applications.

  15. Vibration in metal and non-metal incubators.

    Science.gov (United States)

    Youngblut, J M; Lewandowski, W; Casper, G R; Youngblut, W R

    1994-01-01

    The purpose of this study was to determine the amount of vibration transmitted to the surface of an incubator mattress. Empty incubators with metal (n = 12) and non-metal (n = 12) bases were monitored for vibration levels when the incubators were turned "off" and when they were turned "on." High levels of low-frequency vibration were detected in both types of incubators in both conditions. The metal incubators transmitted significantly less vibration to the mattress than did the non-metal incubators at several frequencies in the "off," the "on," and the "adjusted" conditions. These results suggest that infants experience significant whole-body vibration while lying in incubators.

  16. Non-metallic inclusions in high manganese austenitic alloys

    OpenAIRE

    A. Grajcar; L. Bulkowski; U. Galisz

    2011-01-01

    Purpose: The aim of the paper is to identify the type, fraction and chemical composition of non-metallic inclusions modified by rare-earth elements in an advanced group of high-manganese austenitic C-Mn-Si-Al-type steels with Nb and Ti microadditions.Design/methodology/approach: The heats of 3 high-Mn steels of a various content of Si, Al and Ti were melted in a vacuum induction furnace and a modification of non-metallic inclusions was carried out by the mischmetal in the amount of 0.87 g or ...

  17. Integration of fuzzy reasoning approach (FRA and fuzzy analytic hierarchy process (FAHP for risk assessment in mining industry

    Directory of Open Access Journals (Sweden)

    Shikha Verma

    2014-10-01

    Full Text Available Purpose: Mining industry has always been known for its unsafe working environment. This industry is one of the most hazard prone industries. To maintain safety in workplace timely assessment of risk associated with different operations performed to extract ore from the ore body has become necessity. To serve the said purpose, present work demonstrates a robust hybrid risk assessment approach for mining industry.Design/Methodology: Accident data from 1995 to 2012 is reviewed to identify hazards contributed to negative outcomes. The FRA approach is implemented to evaluate the risk levels associated with identified hazard factors. Thereafter AHP pairwise comparison matrix is developed to obtain priority weights for the hazard factors. Final priority of hazards based on severity of level of risk associated with them is obtained considering the outcome of FRA approach in terms of risk score for the hazards, combined with the priority weights obtained from AHP technique.Findings: Defuzzified FAHP weight of hazard factors, this weight gives priority sequence of hazards to be considered for development of plan of mitigation.Originality/Value: Risk assessment is a requirement of the Occupational Health and Safety Act 2000 (Section 7& 8. The data required to assess the risk is uncertain, and in such case fuzzy approach is well suited to process the data and get the crisp output. The output of fuzzy approach is made robust with its integration to AHP. In this way FAHP can be used as robust technique for risk assessment in this industry and this technique develops an efficient safety management system for the achievement of goal to develop the workplace with zero accident, which many other countries have already achieved.

  18. Management of Sulfide-Bearing Waste, a Challenge for the Mining Industry

    Directory of Open Access Journals (Sweden)

    Björn Öhlander

    2012-02-01

    Full Text Available Oxidation of iron sulfides in waste rock dumps and tailings deposits may result in formation of acid rock drainage (ARD, which often is a challenging problem at mine sites. Therefore, integrating an ARD management plan into the actual mine operations in the early phases of exploration, continuing through the mine life until final closure might be successful and decrease the environmental impact. A thorough characterization of ore and waste should be performed at an early stage. A detailed knowledge of mineralogical composition, chemical composition and physical properties such as grain size, porosity and hydraulic conductivity of the different waste types is necessary for reliable predictions of ARD formation and efficiency of mitigation measures. Different approaches to prevent and mitigate ARD are discussed. Another key element of successfully planning to prevent ARD and to close a mining operation sustainably is to engage the mine stakeholders (regulators, community and government leaders, non-governmental organization (NGOs and lenders in helping develop and implement the ARD management plan.

  19. Environmental assessment of mining industry solid pollution in the mercurial district of Azzaba, northeast Algeria.

    Science.gov (United States)

    Seklaoui, M'hamed; Boutaleb, Abdelhak; Benali, Hanafi; Alligui, Fadila; Prochaska, Walter

    2016-11-01

    To date, there have been few detailed studies regarding the impact of mining and metallogenic activities on solid fractions in the Azzaba mercurial district (northeast Algeria) despite its importance and global similarity with large Hg mines. To assess the degree, distribution, and sources of pollution, a physical inventory of apparent pollution was developed, and several samples of mining waste, process waste, sediment, and soil were collected on regional and local scales to determine the concentration of Hg and other metals according to their existing mineralogical association. Several physico-chemical parameters that are known to influence the pollution distribution are realized. The extremely high concentrations of all metals exceed all norms and predominantly characterize the metallurgic and mining areas; the metal concentrations significantly decrease at significant low distances from these sources. The geo-accumulation index, which is the most realistic assessment method, demonstrates that soils and sediments near waste dumps and abandoned Hg mines are extremely polluted by all analyzed metals. The pollution by these metals decreases significantly with distance, which indicates a limited dispersion. The results of a clustering analysis and an integrated pollution index suggest that waste dumps, which are composed of calcine and condensation wastes, are the main source of pollution. Correlations and principal component analysis reveal the important role of hosting carbonate rocks in limiting pollution and differentiating calcine wastes from condensation waste, which has an extremely high Hg concentration (˃1 %).

  20. What Gives You a Social Licence? An Exploration of the Social Licence to Operate in the Australian Mining Industry

    Directory of Open Access Journals (Sweden)

    Sara Bice

    2014-01-01

    Full Text Available This article analyses the ways in which major, multinational mining companies operating within Australia understand sustainable development and articulate their “social licence to operate”. The article contributes a novel perspective to ongoing discussions about the social licence by exploring the ways in which leading Australian mining companies define and assert their social licences through sustainable development discourse. A content and discourse analysis of 18 sustainability reports across a four year period, supplemented by qualitative interview data, draws out these issues. While most companies use these reports to confirm beliefs in the necessity of a social licence, the ways in which the licence is specifically defined and maintained are not generally made explicit. Additionally, key theoretical criteria required for a social licence, such as free, prior and informed consent, appear to be overlooked. In conclusion, the article suggests ways in which criteria for a social licence within the mining industry could be defined more clearly and raises consequent questions to shape future research.

  1. The Effect of Fine Non-Metallic Inclusions on the Fatigue Strength of Structural Steel

    Directory of Open Access Journals (Sweden)

    Lipiński T.

    2015-04-01

    Full Text Available The article discusses the results of a study investigating the effect of the number of fine non-metallic inclusions (up to 2 µm in size on the fatigue strength of structural steel during rotary bending. The study was performed on 21 heats produced in an industrial plant. Fourteen heats were produced in 140 ton electric furnaces, and 7 heats were performed in a 100 ton oxygen converter. All heats were desulfurized. Seven heats from electrical furnaces were refined with argon, and heats from the converter were subjected to vacuum circulation degassing.

  2. Evaluation and upgrading of records of stress measurement data in the mining industry.

    CSIR Research Space (South Africa)

    Stacey, TR

    1998-06-01

    Full Text Available field within the shaft pillar at Deelkraal, West Driefontein Gold Mine Report, undated, estimated 1989. Ortlepp. W.D. and Bristow, D.M. 1990. Hydro-fracturing and fluid injection data from simple tests in three different mining environments, Proc... at the Prieska Copper Prospect, Rep. Coun. Sci. Ind. Res. S. Afr., No MEG 892. Van Heerden, W.L. 1971. Determination of the stresses in the rock surrounding the Orange Fish Tunnel, Rep. Coun. Sci. Ind. Res. S. Afr., No MEG 1070. Van Heerden, W.L. 1972...

  3. Interaction mechanism of non-metallic particles with crystallization front

    Directory of Open Access Journals (Sweden)

    Żak P. L.

    2017-03-01

    Full Text Available The process of steel solidification in the CCS mould is accompanied by a number of phenomena relating to the formation of non-metallic phase, as well as the mechanism of its interaction with the existing precipitations and the advancing crystallization front. In the solidification process the non-metallic inclusions may be absorbed or repelled by the moving front. As a result a specific distribution of non-metallic inclusions is obtained in the solidified ingot, and their distribution is a consequence of these processes. The interaction of a non-metallic inclusion with the solidification front was analyzed for alumina, for different values of the particle radius. The simulation was performed with the use of own computer program. Each time a balance of forces acting on a particle in its specific position was calculated. On this basis the change of position of alumina particle in relation to the front was defined for a specific radius and original location of the particle with respect to the front.

  4. Planning the Mine and Mining the Plan

    Science.gov (United States)

    Boucher, D. S.; Chen, N.

    2016-11-01

    Overview of best practices used in the terrestrial mining industry when developing a mine site towards production. The intent is to guide planners towards an effective and well constructed roadmap for the development of ISRU mining activities. A strawman scenario is presented as an illustration for lunar mining of water ice.

  5. Research of SOA-Based Data Mining Application Platform in Telecommunications Industry%基于SOA的电信行业数据挖掘应用平台研究

    Institute of Scientific and Technical Information of China (English)

    于明凯; 勾学荣; 张勖; 柴莎莎

    2009-01-01

    Building data mining application platform in telecommunications industry can take full advantage of business data in telecommunication systems to explore the potential patterns in user behavior and business trends,thereby providing more effective decision support to help enterprises cope with increasingly fierce industry competitions.This paper discusses data mining architecture and business demand for data mining in telecommunications industry,and on this basis puts forward an SOA-based data mining application platform solutions in telecommunications industry with the characteristic of integration,flexibility,and customization.

  6. 煤炭工业矿区规划与环境影响评价的探讨%Coal Industry Mine Planning and Environmental Impact Assessment Study

    Institute of Scientific and Technical Information of China (English)

    张天殊; 王可心

    2013-01-01

      Since the beginning of reform and opening up, the ecological mining became the main construction of the the World mine development field mode Throughout the current mine construction at home and abroad can be found that the coal the industrial ecology mine construction has become mainstream. This paper first discusses the necessity of the environmental assessment of the coal industry mine planning, discusses the problems of coal the industrial mine planning environment evaluation, so as to establish the coal industry mine planning environment evaluation system, the last proposed optimization strategies: rational planning mine land use and promote the full use of the capacity of the environment.%  改革开放以来,生态矿区开始成为世界矿区发展领域的主要建设模式,纵观目前的国内外矿区建设可以发现,煤炭工业生态矿区建设已成为了主流。文章探讨了煤炭工业矿区规划环境评价的必要性,论述了当前煤炭工业矿区规划环境评价存在的问题,从而建立了煤炭工业矿区规划环境评价体系,提出了相关的优化对策:合理规划矿区土地利用、推动环境容量的充分利用和构建人与人的和谐。

  7. Amendments with organic and industrial wastes stimulate soil formation in mine tailings as revealed by micromorphology

    NARCIS (Netherlands)

    Zanuzzi, A.; Arocena, J.M.; van Mourik, J.M.; Faz Cano, A.

    2009-01-01

    Mine tailings are inhospitable to plants and soil organisms, because of low pH and poor soil organic matter contents. Vegetation establishment requires a soil system capable of supporting the nutrient and water requirements of plants and associated organisms. The objective of this study was to

  8. A Strategic and Industrial Assessment of Sea Mine Warfare in the Post- Cold War Era

    Science.gov (United States)

    1993-04-01

    NO. ACCESSION NO. 11. TITLE (include Security Classification) a idpO--4 ,i-. 12. PERSONAL AUTHOR(S) 4, 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE...would like to reflect upon inevitable weaknesses as well. Due largely to government program fluctuacions and historically low funding levels, mine

  9. [Musculoskeletal impairment in workers engaged in mining industry of Northern regions].

    Science.gov (United States)

    Rukavishnikov, V S; Kolesov, V G; Shaiakhmetov, S F; Pankov, V A

    2004-01-01

    Analyzing values of transitory disablement morbidity for workers engaged into mining enterprises of East Siberia and Asiatic Far North, the authors revealed high prevalence of locomotory disorders among inside workers. The authors specified diagnostic criteria for occupational etiology of those disorders, presented arguments against considering cervical and lumbar pains as occupational diseases.

  10. Beating Obesity: Factors Associated with Interest in Workplace Weight Management Assistance in the Mining Industry

    Directory of Open Access Journals (Sweden)

    Tamara D. Street

    2017-03-01

    Conclusion: Weight management programs should provide information, motivation. and trouble-shooting assistance to meet the needs of at-risk mining employees, including those who are attempting to change and maintain behaviors to achieve a healthy weight and be suitably fit for work.

  11. Oral bioaccessibility and human exposure to anthropogenic and geogenic mercury in urban, industrial and mining areas

    NARCIS (Netherlands)

    Rodrigues, S.M.; Coelho, C.; Cruz, N.; Monteiro, R.J.R.; Henriques, B.; Duarte, A.C.; Romkens, P.F.A.M.; Pereira, E.

    2014-01-01

    The objective of this study was to characterize the link between bioaccessibility and fractionation of mercury (Hg) in soils and to provide insight into human exposure to Hg due to inhalation of airborne soil particles and hand-to-mouth ingestion of Hg-bearing soil. Mercury in soils from mining, urb

  12. Biomonitoring of cadmium, chromium, nickel and arsenic in general population living near mining and active industrial areas in Southern Tunisia.

    Science.gov (United States)

    Khlifi, Rim; Olmedo, Pablo; Gil, Fernando; Feki-Tounsi, Molka; Hammami, Bouthaina; Rebai, Ahmed; Hamza-Chaffai, Amel

    2014-02-01

    The human health impact of the historic and current mining and industrial activities in Tunisia is not known. This study assessed the exposure to metals in the population of Southern Tunisia, using biomonitoring. The aim of this pilot study was to evaluate metal exposure on 350 participants living near mining and active industrial areas in the South of Tunisia. Blood specimens were analyzed for metals (Cd, Cr, As, and Ni) by Atomic Absorption Spectrometer equipped with Zeeman background correction and AS-800 auto sampler by graphite furnace and graphite tubes with integrated L'vov platform. The sample population was classified according to different age groups, sex, smoking habit, sea food and water drinking consumption, occupational exposure, amalgam fillings and place of residence. The blood As, Cd, Cr and Ni values expressed as mean ± SD were 1.56 ± 2.49, 0.74 ± 1.15, 35.04 ± 26.02 and 30.56 ± 29.96 μg/l, respectively. Blood Cd and Ni levels in smokers were 2 and 1.2 times, respectively, higher than in non-smokers. Blood Cd levels increase significantly with age (p = 0.002). As, Cd and Ni were significantly correlated with gender and age (p Tunisia reveals a substantial exposure to several metals. The pathways of exposure and health significance of these findings need to be further investigated.

  13. Modeling industrial thickener using computational fluid dynamics (CFD), a case study:Tailing thickener in the Sarcheshmeh copper mine

    Institute of Scientific and Technical Information of China (English)

    Majid Ebrahimzadeh Gheshlaghi; Ataallah Soltani Goharrizi; Alireza Aghajani Shahrivar; Hadi Abdollahi

    2013-01-01

    Separation of particles from liquid in the large gravitational tanks is widely used in mining and industrial wastewater treatment process. Thickener is key unit in the operational processes of hydrometallurgy and is used to separate solid from liquid. In this study, population balance models were combined with com-putational fluid dynamics (CFD) for modeling the tailing thickener. Parameters such as feed flow rate, flocculant dosage, inlet solid percent and feedwell were investigated. CFD was used to simulate the industrial tailing thickener with settled bed of 120 m diameter which is located in the Sarcheshmeh cop-per mine. Important factor of drag force that defines the rake torque of rotating paddles on the bed was also determined. Two phases turbulence model of Eulerian/Eulerian in accordance with turbulence model of k-e was used in the steady-state. Also population balance model consists of 15 groups of particle sizes with Luo and Lehr kernel was used for aggregation/breakage kernel. The simulation results showed good agreement with the operational data.

  14. Regulatory and legal aspects in industrial mining industries; Aspectos legais e regulatorios em empresas minero-industriais

    Energy Technology Data Exchange (ETDEWEB)

    Magalhaes, Maisa Haiidamus

    2016-07-01

    The regulation between the Brazilian Nuclear Energy Commission - CNEN performance and the mineral industries that produces NORM is presented. Besides the legal aspects, some comments from the point of view of the supervisory and licensing body about their performance in the radiation protection area are pointed out.

  15. Adsorption of Ammonium and Heavy Metal Ions on Industrial Vermiculite from the Yuli Mine in Xinjiang, China

    Institute of Scientific and Technical Information of China (English)

    PENG Tongjiang; ZHANG Baoshu; LIU Fusheng

    2006-01-01

    The present work discusses the mineralogy, saturated adsorption of ammonium and adsorption of heavy metal ions (Cu2+, Pb2+ and Zn2+) on industrial vermiculite samples from the Yuli Mine in Xinjiang Autonomous Region. The saturated adsorption capacity of ammonium and the affection factors of adsorption of Cu2+, Pb2+ and Zn2+ are discussed on the basis of the mineralogical characteristics of the industrial vermiculite samples. The saturated adsorption capacities of ammonium are between 56.02 and 98.42 mmol/100g. The time of adsorption equilibrium is about 30-60 min, and the pH values and concentration of the ion solution significantly affect the adsorption capacities of the heavy metal ions. The adsorption capabilities of the heavy metal ions on industrial vermiculite are almost the same in the low ion concentration solutions, characterized by a sequence of Zn2+>Pb2+>Cu2+ for adsorption capacity in solutions with relatively high ion concentration. The results have practical significance for the application of the industrial vermiculite to treating wastewater containing ammonium or heavy metal ions.

  16. POSSIBILITIES FOR IMPROVEMENT OF RISK MANAGEMENT PRACTICES IN THE COAL MINING INDUSTRY OF THE FEDERATION OF BOSNIA AND HERZEGOVINA

    Directory of Open Access Journals (Sweden)

    Safet Kozarević

    2014-11-01

    Full Text Available Current business environment and growing exposure to a wide range of risks require companies (especially the large ones to raise a question of risk management, start treating it as a particular business function that needs special attention and for which they have to seek proper solutions within their organizational structure. This particularly affects the coal industry, where risk exposure is rather evident and makes risk management one of the key management issues in general. A central point of the analysis includes companies in the coal industry of the Federation of Bosnia and Herzegovina (F BiH, where the management needs to be greatly concerned about protection against risks that affect this industry much more than other industries, in particular pure risks (those that involve only the possibility of loss and no possibility of gain . And if we add the so - called emerging or “newly developing” risks, which are still unknown even to risk management experts, it is clear that management of large companies have to take care of risk management culture development and seek adequate organizational solutions. On the basis of the conducted empirical research, the paper will show and appropriately explain the descriptive analysis results, accordingly used for establishment of the level of risk management efficiency in the coal mines of the F BiH and identification of certain weaknesses, whose elimination could significantly improve the process and increase the level of economic protection for these companies.

  17. From end-of-pipe to industrial ecology: What is the role of enhanced landfill mining?

    OpenAIRE

    Van Acker, Karel; Geysen, Daneel; Van Passel, Steven

    2010-01-01

    Industrial ecology aims at optimising resource flows throughout society. Landfills and industrial ecology are each other's opposites. The next logical step is that resources dumped into landfills are re-introduced into the material cycles. This article critically reviews whether this recovery of resources out of landfills can currently be realised in a sustainable way and what its role is within an industrial ecology context. The focus is on the evolution in waste management towards Enhanced ...

  18. Roofbolting techniques in the German hard coal mining industry; Ankertechnik im deutschen Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Eikhoff, J. [Deutschen Steinkohle AG (DSK), Herne (Germany)

    2004-09-09

    Rockbolting is a key technology for the roadway support system in German coal mining. Beginning with the view to the extension of rockbolting technique in roadway development at DSK the actual activities are described with a choice of innovation strategies. In a view ''yesterday-today-tomorrow'' the design of the alternative cutting system with rockbolting support, a new concept for development of wide setup rooms and a new generation of rockbolts are figured beside several additional projects. (orig.)

  19. Nutrition and occupational health and safety in the South African mining industry, part 1

    CSIR Research Space (South Africa)

    Dias, B

    2003-12-01

    Full Text Available or excess in a person’s intake of nutrients and other dietary elements needed for healthy living are both associated with high levels of sickness and disability, shortened life expectancies, and lower levels of productivity. The importance of nutrition.................................................................................................131 6.11 Bad organisation of food issues .....................................................................132 6.12 Food being thrown away or consumed by persons not employed by the mines (food wastage...

  20. Quality Risk Management – An Integrated Approach in the Mining Industry

    OpenAIRE

    Ionica, Andreea; Edelhauser, Eduard

    2007-01-01

    The continued development of management system standards into areas such as environment, health and safety, and information security has reinforced the calls for an integrated approach. In the mining field, characterized by a high level of specificity, an integrated approach to underground activities should not omit the influence of the risk factors. In this context QRM can be not just a solution, but also a necessity.

  1. Industrial contamination of soil related to some active and closed mine facilities in the Republic of Macedonia

    Directory of Open Access Journals (Sweden)

    Tasev Goran K.

    2015-01-01

    Full Text Available Several industrial pollution sources at the territory of the Republic of Macedonia, were studied, one Pb-Zn mine with mill, one copper mine with mill and copper leaching facility, as well as one former Pb-Zn smelting facility near the city of Veles and one Fe-Ni smelting facility near the city of Kavadarci. The concentrations of heavy metals at Veles hot-spot were in the range: 20÷1823 mg kg- 1Pb, 29÷2395 mg kg-1Zn, 28÷65 mgkg-1Cd, 27÷82 mg kg-1 Cu, 39÷164 mg kg-1Ni, 508÷938 mgkg-1Mn and 1.6÷3.8% Fe, all of them being above Dutch standard optimal values. The vicinity of the Feni plant displayed concentrations of heavy metals as follows: 16÷31 mg kg-1 Pb, 117÷286 mgkg-1 Zn, 13÷24 mg kg-1Co, 42÷119 mg kg-1 Cu, 158÷292 mg kg-1Ni, 119÷236 mg kg-1 Cr and 2.24÷3.79% Fe. Airborne dust measurements around the Zletovo mine displayed multiplexed above standard values, with an exception of nickel, there enrichment factors ranged from mediate ones such were those for copper of 20.8, cadmium of 28.7, arsenic of 32.5 up to high ones for zinc with 341.7 and lead 925. Soil samples around the Zletovo mine displayed: 19.3-76.9 g kg-1 Fe, 643-28000 mg kg-1 Mn, 42.3-529.66 mg kg-1 Pb and 138-3240 mg kg-1 Zn. Finally around the Bucim copper mine the results displayed the following findings: 13.1÷225 mg kg-1 As, 0.67÷17.9 mg kg-1 Cd, 30.1÷171 mg kg-1 Cr, 17.8÷1734 mg kg-1 Cu, 9.8÷69.4 mg kg-1 Ni, 46÷3456 mg kg-1 Pb, 88÷3438 mg kg-1 Zn, 169÷998 mg kg-1 Mn, 0.73÷5.02% Fe.

  2. Risky business or not? FIFOs, sexual risk taking and the Australian mining industry.

    Science.gov (United States)

    O'Mullan, Cathy; Debattista, Joseph; Browne, Matthew

    2016-04-01

    Issue addressed The fly-in, fly-out (FIFO) and drive-in, drive-out (DIDO) models of mining in Australia have led to concerns about adverse health and psychosocial impacts. Despite speculation that increased levels of sexually transmitted infections (STIs) in Australia, including HIV, are associated with FIFO/DIDO work, we know little about sexual risk-taking behaviours in mining populations. This study explores differences in sexual risk taking and perceptions of risk between FIFO/DIDO miners and residential miners. Methods A cross-sectional survey was administered to a sample (n=444) of male miners working in Queensland, Australia. The self-completed survey contained 49 questions relating to knowledge, attitudes and behaviour and included demographic information and specific items related to sex and relationships. Results FIFO/DIDO status was not associated with any differential sexual risk-taking behaviours, except for an increased probability of reporting 'ever being diagnosed with an STI'; 10.8% of FIFO/DIDO respondents versus 3.6% of others (x(2) (1)=4.43, P=0.35). Conclusions Our results appear to counter anecdotal evidence that FIFO/DIDO miners engage in higher sexual risk behaviours when compared with residential miners. So what? Anecdotal evidence linking the rise of sexually transmitted infections with the FIFO/DIDO mining workforce could drive costly and unnecessary approaches to prevention. Further research, surveillance and monitoring are required to inform health promotion interventions.

  3. Tangible Asset Management In Real Sector Companies: A Parallel Between Industry Of Crude Oil Refining And Industry Of Refining Of Non Metallic Mineral In Colombia Gerenciamiento de activos tangibles en empresas del sector real: un paralelo entre industria de refinación de crudos e industria de refinación de minerales no metálicos en Colombia

    Directory of Open Access Journals (Sweden)

    John Jairo Forero Romero

    2012-08-01

    Full Text Available Enterprises around of the world are striving to understand and ensure that risks in utilities they govern are effectively managed while they must satisfy all expectations of their stakeholders. For this purpose there are now organisms and standardized management systems to manage financial risks, environmental hazards, industrial safety and occupational health risk. However, operational and reliability risks in the business lack an equivalent oversight body or an organizing framework through which enterprises can asses such risks , or define standards to which can be held accountable.The emergent understanding of asset management across all industry sectors has triggered a subsequent need for a standardized approach. This article identifies the key elements of asset management process and explains the benefits of the application of its elements with reference to two specific cases: the Barrancabermeja Refinery of Ecopetrol S.A. and  Sumicol S.A.Las empresas de todo el mundo se esfuerzan por comprender y asegurar que los riesgosen sus activos tangibles estén regidos bajo una administración eficaz y, a su vez, debenencargarse de cumplir con todas las expectativas de sus grupos de interés. Con estepropósito hoy en día existen organismos y sistemas de gestión estandarizados paraadministrar los riesgos financieros, ambientales, de seguridad de industrial y saludocupacional. Sin embargo, los riesgos operativos y de confiabilidad en el negocio hasta elmomento carecen de un órgano de supervisión equivalente, o un marco de organización através del cual las empresas pueden evaluar estos riesgos o definir las normas a las quepueden ser considerados responsables.El entendimiento emergente de la gestión efectiva de activos en todos los sectoresde la industria ha provocado una necesidad de un enfoque estandarizado. Este artículoidentifica los elementos clave del proceso de gestión de activos y explica los beneficiosde la aplicación de

  4. A study on non-metallic structure of heliostat

    Energy Technology Data Exchange (ETDEWEB)

    Liu Xiaobin; Zang Chuncheng; Zhang Xiliang; Wang Yangzhong; Du Fengli [Himin Solar Energy Group Co., Ltd, Dezhou City (China); Wang Zhifeng [Inst. of Electrical Engineering, CAS, BJ (China)

    2008-07-01

    Heliostat constitutes a very important component in the solar power tower system. Its importance derives from three aspects: one is the large proportion in the total cost, accounting for about 50% of the whole, the other is its concentration efficiency and reflectivity heavily determining the power conversion from solar thermal energy to electrical energy, another is itself power consumption amount highly expressing failure or success of the power plant. Therefore, serious efforts and considerations from the structure, motion and control mode to material selection have to be given in the design and optimization of heliostat. In the present paper, the mechanical and aging performance of non-metallic materials is investigated and compared. The possibility of these non-metallic materials in the application of heliostat structure is discussed. (orig.)

  5. Numerical analysis of the non-metallic inclusions distribution and separation in a two-strand tundish

    Directory of Open Access Journals (Sweden)

    T. Merder

    2013-04-01

    Full Text Available The tundish plays an important role in the challenging task of a “clean steel” production process. The flow of the liquid steel in tundish has a crucial influence on non-metallic inclusions distribution and separation. The article presents computational studies of non-metallic inclusions separation in a two-strand industrial tundish during steady-state casting. Tundish capacity is 7,5 t. First, flow structure in the tundish was investigated using water model of the industrial tundish in a 1:2 scale. The experimental results, regarding RTD characteristics were used to validate numerical model. With validated model, particle distribution and separation in the two-strand tundish were investigated numerically. For modelling the separation of particles at the fluid surface, a modified boundary condition has been implemented.

  6. Prizes awarded by the Minister of Mining and Power Industry for outstanding achievements in research, development and promotion of new technology in 1985. [Poland

    Energy Technology Data Exchange (ETDEWEB)

    Petryk, F.

    1986-03-01

    Projects are reviewed which were awarded prizes for development of technology for coal mining and power generation. Six first prizes, 11 second prizes and 17 third prizes were awarded. The following information on each prize recipient is given: title of the project, name of company sponsoring the motion for an award, short description of the project and full names of research workers who participated in the project. The following projects are evaluated: the Czeczott mine design, the KWK-1500s bucket wheel excavator, a method for disposal of wastes from coal combustion in power plants, design of OWH pumps for mine draining, design of new burners for combustion of pulverized black coal, technology of manufacturing the FUM-S mixture for reducing combustibility of materials used in underground coal mining, digital equipment for seismoacoustic and seismic monitoring systems for coal mines with rock burst hazards, design of the EFAL-22 thyristor controlled frequency converters for drives of coal transport systems in power plants, systems for pneumatic stowing using fly ash from coal combustion, a new method for strata control at longwall faces mined with hydraulic stowing, seismic equipment for surveys of coal bearing strata, new design of vibrating screens characterized by reduced energy consumption, hydraulic control devices for powered supports, dust suppression systems for heading machines and mine haulage, new mine drivage schemes under complicated conditions for heading machines, a fire detection system for the Bobrek mine, utilization of waste heat from ventilation of underground coal mines, new methane monitoring and control systems, data bank of fuel economy and power industry.

  7. A systems-based conceptual framework for assessing the determinants of a social license to operate in the mining industry.

    Science.gov (United States)

    Prno, Jason; Slocombe, D Scott

    2014-03-01

    The concept of a "social license to operate" (SLO) was coined in the 1990s and gained popularity as one way in which "social" considerations can be addressed in mineral development decision making. The need for a SLO implies that developers require the widespread approval of local community members for their projects to avoid exposure to potentially costly conflict and business risks. Only a limited amount of scholarship exists on the topic, and there is a need for research that specifically addresses the complex and changeable nature of SLO outcomes. In response to these challenges, this paper advances a novel, systems-based conceptual framework for assessing SLO determinants and outcomes in the mining industry. Two strands of systems theory are specifically highlighted-complex adaptive systems and resilience-and the roles of context, key system variables, emergence, change, uncertainty, feedbacks, cross-scale effects, multiple stable states, thresholds, and resilience are discussed. The framework was developed from the results of a multi-year research project which involved international mining case study investigations, a comprehensive literature review, and interviews conducted with mining stakeholders and observers. The framework can help guide SLO analysis and management efforts, by encouraging users to account for important contextual and complexity-oriented elements present in SLO settings. We apply the framework to a case study in Alaska, USA before discussing its merits and challenges. We also illustrate knowledge gaps associated with applications of complex adaptive systems and resilience theories to the study of SLO dynamics, and discuss opportunities for future research.

  8. A Systems-Based Conceptual Framework for Assessing the Determinants of a Social License to Operate in the Mining Industry

    Science.gov (United States)

    Prno, Jason; Slocombe, D. Scott

    2014-03-01

    The concept of a "social license to operate" (SLO) was coined in the 1990s and gained popularity as one way in which "social" considerations can be addressed in mineral development decision making. The need for a SLO implies that developers require the widespread approval of local community members for their projects to avoid exposure to potentially costly conflict and business risks. Only a limited amount of scholarship exists on the topic, and there is a need for research that specifically addresses the complex and changeable nature of SLO outcomes. In response to these challenges, this paper advances a novel, systems-based conceptual framework for assessing SLO determinants and outcomes in the mining industry. Two strands of systems theory are specifically highlighted—complex adaptive systems and resilience—and the roles of context, key system variables, emergence, change, uncertainty, feedbacks, cross-scale effects, multiple stable states, thresholds, and resilience are discussed. The framework was developed from the results of a multi-year research project which involved international mining case study investigations, a comprehensive literature review, and interviews conducted with mining stakeholders and observers. The framework can help guide SLO analysis and management efforts, by encouraging users to account for important contextual and complexity-oriented elements present in SLO settings. We apply the framework to a case study in Alaska, USA before discussing its merits and challenges. We also illustrate knowledge gaps associated with applications of complex adaptive systems and resilience theories to the study of SLO dynamics, and discuss opportunities for future research.

  9. `Old-New' Mining Towns - Examples of the Renovation and Adaptation of Post-Industrial Objects

    Science.gov (United States)

    Langer, Piotr

    2016-06-01

    Poland's economic transformation has proved to be a critical phase in the contemporary development of its industrial cities, initiating profound spatial and functional changes. In researching the basics of the development of `post-industrial' cities, it can be seen that the work undertaken is focused on reusing post-industrial buildings and objects. This results not only in functional changes in the appearance and condition of the transformed structures, but also preserves or destroys their authenticity and historical identity. This problem is linked with several phenomena, including `aware inactivity', `destructive adaptation', and `false revitalization'.

  10. The importance of observation of structural changes of lead acid battery active mass in special applications in the mining industry

    Directory of Open Access Journals (Sweden)

    Jana Zimáková

    2015-10-01

    Full Text Available To be able to use lead acid batteries in particularly difficult conditions in the mining industry, it is very important to understand the events that occur during traction operation of mining carts, or auxiliary lighting. Failure of lead accumulators in the hazardous environments, where it is desired non-explosive embodiment, may have fatal consequences. The paper describes the possibility of observing changes in active materials at the microscopic level. The process of charging and discharging lead-acid accumulator has been described in many publications. The aim of this article is to supplement known information about a series of images and analysis that will accurately show progressive changes in the structure of the negative electrode. Negative electrodes are, at each cycle, charged and discharged under the same conditions, scanned with a scanning electron microscope, the elemental analysis (EDS is performed, and the size of the individual sulfate crystals is measured. Previously measured results indicate that during the charging the conversion of PbSO4 crystals into a charged form of the active mass is not complete, and there is a rapid increase in the size of lead sulfate crystals on the negative electrode. This article compares changes in electrode surface composition after two cycles. There is a clear loss of lead and, on the other hand, the visible growth of sulfur. This indicates progressive surface sulfation.

  11. Unravelling safety compliance in the mining industry: examining the role of work stress, job insecurity, satisfaction and commitment as antecedents

    Directory of Open Access Journals (Sweden)

    Uanda Masia

    2011-03-01

    Full Text Available Orientation: Safety compliance remains a major issue in the South African mining industry. This article explores the roles of specific work-related job and attitudinal variables in predicting compliance.Research purpose: The objective of this study was to investigate the relationship of work stress, job insecurity, satisfaction and commitment to safety compliance in a mine.Motivation for the study: The study aims to predict safety compliance through work-related variables in order to manage safety better.Research design, approach and method: The researchers used a cross-sectional survey design with a convenience sample (n = 158. They distributed a survey booklet. It included a biographical questionnaire, scales for job insecurity, satisfaction, affective organisational commitment, workplace accidents and safety compliance as well as a work stress measure that comprised dimensions of role clarity, conflict and overload.Main findings: The results showed that work stress and job insecurity had a negative relationship with safety compliance. The researchers found that only job satisfaction was a significant predictor of safety.Practical/managerial implications: Although exploratory, this study suggests that promoting job satisfaction may improve safety compliance whilst job stress and job insecurity also relate negatively to safety compliance.Contribution/value-add: This study shows that job satisfaction is more important than organisational commitment, job security and work stress for predicting safety compliance.

  12. Safety leadership and systems thinking: application and evaluation of a Risk Management Framework in the mining industry.

    Science.gov (United States)

    Donovan, Sarah-Louise; Salmon, Paul M; Lenné, Michael G; Horberry, Tim

    2017-10-01

    Safety leadership is an important factor in supporting safety in high-risk industries. This article contends that applying systems-thinking methods to examine safety leadership can support improved learning from incidents. A case study analysis was undertaken of a large-scale mining landslide incident in which no injuries or fatalities were incurred. A multi-method approach was adopted, in which the Critical Decision Method, Rasmussen's Risk Management Framework and Accimap method were applied to examine the safety leadership decisions and actions which enabled the safe outcome. The approach enabled Rasmussen's predictions regarding safety and performance to be examined in the safety leadership context, with findings demonstrating the distribution of safety leadership across leader and system levels, and the presence of vertical integration as key to supporting the successful safety outcome. In doing so, the findings also demonstrate the usefulness of applying systems-thinking methods to examine and learn from incidents in terms of what 'went right'. The implications, including future research directions, are discussed. Practitioner Summary: This paper presents a case study analysis, in which systems-thinking methods are applied to the examination of safety leadership decisions and actions during a large-scale mining landslide incident. The findings establish safety leadership as a systems phenomenon, and furthermore, demonstrate the usefulness of applying systems-thinking methods to learn from incidents in terms of what 'went right'. Implications, including future research directions, are discussed.

  13. The Algorithm of Development the World Ocean Mining of the Industry During the Global Crisis

    Science.gov (United States)

    Nyrkov, Anatoliy; Budnik, Vladislav; Sokolov, Sergei; Chernyi, Sergei

    2016-08-01

    In the article reviewed extraction effect of hydrocarbons on the general country's developing, under the impact of economical, demographical and technological factors, as well as it's future role in the world energy balance. Also adduced facts which designate offshore and deep water production of unconventional and conventional hydrocarbons including mining of marine mineral resources as perspective area of development in the future, despite all the difficulties of this sector. In the article considered the state and prospects of the Russian continental shelf, in consideration of its geographical location and its all existing problems.

  14. THE DASHBOARD - STRATEGIC MANAGEMENT TOOL OF ACTIVITIES IN THE COAL MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    DINA IONELA-CLAUDIA

    2014-02-01

    Full Text Available In order to achieve the objectives at all levels and categories of functions in the unit, use multiple information systems, including the dashboard which is one of the management tools that responds very well to the rationale and supporting data of management decisions complementary to those provided by other media. In this respect, we try to calculate indicators organization currently working compartments of the coal mining units and will propose a series of indicators whose calculation we consider would be necessary for a detailed presentation as activity carried out and the improvement of management.

  15. Testing and modeling the influence of reclamation and control methods for reducing nonpoint mercury emissions associated with industrial open pit gold mines.

    Science.gov (United States)

    Miller, Matthieu B; Gustin, Mae S

    2013-06-01

    Industrial gold mining is a significant source of mercury (Hg) emission to the atmosphere. To investigate ways to reduce these emissions, reclamation and dust and mercury control methods used at open pit gold mining operations in Nevada were studied in a laboratory setting. Using this information along with field data, and building off previous work, total annual Hg emissions were estimated for two active gold mines in northern Nevada. Results showed that capping mining waste materials with a low-Hg substrate can reduce Hg emissions from 50 to nearly 100%. The spraying of typical dust control solutions often results in higher Hg emissions, especially as materials dry after application. The concentrated application of a dithiocarbamate Hg control reagent appears to reduce Hg emissions, but further testing mimicking the actual distribution of this chemical within an active leach solution is needed to make a more definitive assessment.

  16. In the First Two Months of This Year Nonferrous Metals Mining and Dressing Industry Invested 7.5 Billion Yuan,Up by 15.3%

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    According to relevant economic operation data for the period from January to February this year released by the National Bureau of Statistics,in the first two months the added value of industrial enterprises above designated size actually grew by 6.8%on Y-o-Y basis.Wherein,added value of mining and dressing industry grew by 4.2%)on Y-o-Y basis,slightly

  17. Analysis of Maintenance Service Contracts for Dump Trucks Used in Mining Industry with Simulation Approach

    Science.gov (United States)

    Dymasius, A.; Wangsaputra, R.; Iskandar, B. P.

    2016-02-01

    A mining company needs high availability of dump trucks used to haul mining materials. As a result, an effective maintenance action is required to keep the dump trucks in a good condition and hence reducing failure and downtime of the dump trucks. To carry out maintenance in-house requires a high intensive maintenance facility and high skilled maintenance specialists. Often, outsourcing maintenance is an economic option for the company. An external agent takes a proactive action with offering some maintenance contract options to the owner. The decision problem for the owner is to decide the best option and for the agent is to determine the optimal price for each option offered. A non-cooperative game-theory is used to formulate the decision problems for the owner and the agent. We consider that failure pattern of each truck follows a non-homogeneous Poisson process (NHPP) and a queueing theory with multiple servers is used to estimate the downtime. As it involves high complexity to model downtime using a queueing theory, then in this paper we use a simulation method. Furthermore, we conduct experiment to seek for the best number of maintenance facilities (servers) which minimises maintenance and penalty costs incurred to the agent.

  18. Prospective study to assess the prevalence and work-related risk factors in the development of musculoskeletal disorders in the South African mining industry

    CSIR Research Space (South Africa)

    Schutte, PC

    2003-09-01

    Full Text Available The objective of this study was to assess the prevalence of work-related musculoskeletal disorders (WMSD) in the South African mining industry and to identify work-related factors that may pose a risk of WMSD developing. Aspects covered...

  19. Stepped-Frequency Ground-Penetrating Radar for Detection of Small Non-metallic Buried Objects

    DEFF Research Database (Denmark)

    Jakobsen, Kaj Bjarne; Sørensen, Helge Bjarup Dissing; Nymann, Ole

    1997-01-01

    to an HP8753C Network Analyzer through a 5 m long Sucoflex coaxial cable. The data are collected automatically using an HPIB interface. The collected data contains both the amplitude and phase information of the reflection coefficient. Data are measured at up to a maximum of 401 different frequencies...... at each measurement point using a mesh-grid with a resolution down to 1 mm by 1 mm. The size of the scan area is 1410 mm by 210 mm. Measurements have been performed on loamy soil containing a buried M-56, a non-metallic AP-mine, and various other mine-like objects made of solid plastic, brass, aluminum......, steel, and wood. The presented results are based on probe-data measured at 100 different frequencies at each measurement point and a coarser mesh-grid of 10 mm by 10 mm, since it is found that less probe-data is needed. Our experiments show that even less amount of probe-data may be necessary....

  20. Effects of industrial microcomputer use in control systems for machines and conveyors in surface mining

    Energy Technology Data Exchange (ETDEWEB)

    Borczyk, Z.; Rosseger, A. (Poltegor-Instytut, Wroclaw (Poland))

    1991-01-01

    Evaluates use of the ComPan Pzaz microcomputers manufactured in Poland for control of bucket wheel excavators without thrust action and for belt conveyors used in brown coal surface mines in Poland. The microcomputer consists of 14 standard microprocessor controller modules and 4 specialized modules. Structure of the control system, types of operations controlled by the system and effects of computerized control on safety and efficiency of operation of bucket wheel excavators are analyzed. Use of the ComPan Pzaz microcomputers for control of steep-angle conveyor systems (with a drive power from 1,000 kW to 4,000 kW) is evaluated. The system controls conveyor start-up and conveyor braking. Selected aspects of ComPan Pzaz reliability and service are also discussed. 2 refs.

  1. Determination of micro and nanoparticles in the workplace area at the enterprises of mining industry

    Directory of Open Access Journals (Sweden)

    T.S. Ulanova

    2015-12-01

    Full Text Available The results of the studies of working area air in mining operations on the content of micro and nanoparticles are presented. In eight of the nine workplaces the excess is detected to the control of fine dust fraction PM 10 content from 4 to 13 times, fractions RM 4,0 and PM 2,5 from 4 to 9 times, fraction RM 1,0 from 3.5 to 9.5 times, wherein the fine fraction RM 1,0 is from 53 to 85 %. During the workplace study a significant excess of nanoparticles is found directly during the production process in relation to the control from 5 to 68 times.

  2. Bacterial assimilation reduction of iron in the treatment of non-metallics

    Directory of Open Access Journals (Sweden)

    Peter Malachovský

    2005-11-01

    Full Text Available Natural non-metallics, including granitoide and quartz sands, often contain iron which decreases the whiteness of these raw materials. Insoluble Fe3+ in these samples could be reduced to soluble Fe2+ by bacteria of Bacillus spp. and Saccharomyces spp. The leaching effect, observed by the measurement of Fe2+concentration in a solution, showed higher activities of a bacterial kind isolated from the Bajkal lake and also by using of yeast Saccharomyces sp. during bioleaching of quartz sands. However, allkinds of Bacillus spp. isolated from the Slovak deposit and from Bajkal lake were very active in the iron reduction during bioleaching of the feldspar raw material. This metal was efficiently removed from quartz sands as documented by the Fe2O3 decrease (from 0,317 % to 0,126 % and from feldpars raw materials by the Fe2O3 decrease (from 0,288 % to 0,115 % after bioleaching. The whiteness of these non-metallics was increased during a visual comparison of samples before and after bioleaching but samples contain selected magnetic particles. A removal of iron as well as a release of iron minerals from silicate matrix should increase the effect of the magnetic separation and should give a product which is suitable for industrial applications.

  3. Ecological restoration of mineland with particular reference to the metalliferous mine wasteland in China: A review of research and practice.

    Science.gov (United States)

    Li, M S

    2006-03-15

    Despite a principal contributor to the rapid economic growth, the mining industry in China produced a large amount of wasteland and caused water pollution and soil erosion as well as other environmental damages. In 2002, this industry generated 265.4 Mt tailings, 130.4 Mt gangue and 107.8 Mt smelting slags. The degraded land associated with mining is estimated to be 3.2 Mha by the end of 2004, deteriorating the land shortage of China. Restoration of mine wasteland began in late 1970s but the restoration process was sluggish. The overall restoration rate (the ratio of reclaimed land area to the total degraded land area) of mine wasteland was some 10-12% with a higher rate for coal mine spoils but a lower rate for metal-mined derelict land. From 1994 to 2004, 149 research papers were published about the restoration of China's mining wasteland, of which 70 were on metal-mined land and 61 on the non-metal-mined land. Although 37 institutions in China were involved in the restoration research, only a few remained active and productive. Metal-mined derelict land is often more metal toxic and deficient of macronutrients and is tougher for revegetation. Many substrate amelioration techniques were proposed and tolerant plant species were tested for use of reclamation of the metal-mined tailings. Five hyperaccumulator species have been reported in China for the potential use in phytoremediation. However, these accomplishments were all at laboratory or small-scale field demonstration stage and still far from the practical use in reality. To accelerate the restoration and utilization of mine wasteland, several recommendations are put forward in this review. Above these suggestions, the commitment and efficiency of the government at all levels are vital.

  4. A water risk index for portfolio exposure to climatic extremes: conceptualization and an application to the mining industry

    Science.gov (United States)

    Bonnafous, Luc; Lall, Upmanu; Siegel, Jason

    2017-04-01

    Corporations, industries and non-governmental organizations have become increasingly concerned with growing water risks in many parts of the world. Most of the focus has been on water scarcity and competition for the resource between agriculture, urban users, ecology and industry. However, water risks are multi-dimensional. Water-related hazards include flooding due to extreme rainfall, persistent drought and pollution, either due to industrial operations themselves, or to the failure of infrastructure. Most companies have risk management plans at each operational location to address these risks to a certain design level. The residual risk may or may not be managed, and is typically not quantified at a portfolio scale, i.e. across many sites. Given that climate is the driver of many of these extreme events, and there is evidence of quasi-periodic climate regimes at inter-annual and decadal timescales, it is possible that a portfolio is subject to persistent, multi-year exceedances of the design level. In other words, for a multi-national corporation, it is possible that there is correlation in the climate-induced portfolio water risk across its operational sites as multiple sites may experience a hazard beyond the design level in a given year. Therefore, from an investor's perspective, a need exists for a water risk index that allows for an exploration of the possible space and/or time clustering in exposure across many sites contained in a portfolio. This paper represents a first attempt to develop an index for financial exposure of a geographically diversified, global portfolio to the time-varying risk of climatic extremes using long daily global rainfall datasets derived from climate re-analysis models. Focusing on extreme daily rainfall amounts and using examples from major mining companies, we illustrate how the index can be developed. We discuss how companies can use it to explore their corporate exposure, and what they may need to disclose to investors and

  5. Non-metallic Inclusions in Continuously Cast Aluminum Killed Steels

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In aluminum killed steels, the size, shape, quantity and formation of non-metallic inclusions in ladle steel (before and after RH vacuum treatment) and in tundish as well as in slabs were studied by EPMA (Electron Probe Microanalysis) and by analyzing the total oxygen. The results showed that in the slabs the total oxygen was quite low and the inclusions discovered were mainly small-sized angular alumina inclusions. This indicates that most inclusions have been removed by floating out during the continuous casting process. In addition, the countermeasures were discussed to decrease the alumina inclusions in the slabs further.

  6. Contaminação por mercúrio no Brasil: fontes industriais vs garimpo de ouro Mercury contamination in Brazil: industrial sources vs gold mining

    Directory of Open Access Journals (Sweden)

    L. D. Lacerda

    1997-04-01

    Full Text Available This paper reviews the history of Hg contamination in Brazil by characterizing and quantifying two major sources of Hg emissions to the environment: industrial sources and gold mining. Industry was responsible for nearly 100% of total Hg emissions from the late 1940's to the early 1970's, when efficient control policies were enforced, leading to a decrease in emissions. Gold mining, on the other hand was nearly insignificant as a Hg source up to the late 1970's, but presently is responsible for over 80% of total emissions. Presently, over 115 tons of Hg are released into the atmosphere in Brazil annually. Nearly 78 tons come from gold mining operations, 12 tons come from chlor-alkali industry and 25 tons come from all other industrial uses. Inputs to soils and waters however, are still unknown, due to lack of detailed data base. However, emissions from diffuse sources rather than well studied classical industrial sources are probably responsible for the major inputs of mercury to these compartments.

  7. A Tentative Idea of Circular Economy Framework of Mining Industry in Panzhihua Areas%攀枝花市矿业循环经济构架设想

    Institute of Scientific and Technical Information of China (English)

    徐翔

    2011-01-01

    矿业是攀枝花市的支柱,设计一套适合攀枝花市矿业可持续发展的循环经济构架具有重要意义.设想的循环经济构架围绕钒钛磁铁矿的综合利用,以采选系统和冶金系统为核心,以综合回收和深加工为依托,辅之以水、电、气及信息的集成共享,达到充分回收矿石中的不同元素,同时尽量延长产业链,形成生态循环系统的目的.%Mining industry is a pillar industry of Panzhihua city,so it is of great significance to design a circular economy framework for the sustainable development of Panzhihua's mining industry. The assumed circular economy framework is around the idea of the comprehensive utilization of vanadium - titanium magnetite, with mining and metallurgy systems as the core systems,an integrated recovery and deep processing industries as the basis,supplemented by the integration and sharing of water, electricity, gas and information. The purpose is to achieve the full recovery of the various elements in the ores, to extend the industrial chain as far as possible, and to form a large ecological cycle system.

  8. Assessing post-industrial land cover change at the Pine Point Mine, NWT, Canada using multi-temporal Landsat analysis and landscape metrics.

    Science.gov (United States)

    LeClerc, Emma; Wiersma, Yolanda F

    2017-04-01

    This study investigates land cover change near the abandoned Pine Point Mine in Canada's Northwest Territories. Industrial mineral development transforms local environments, and the effects of such disturbances are often long-lasting, particularly in subarctic, boreal environments where vegetation conversion can take decades. Located in the Boreal Plains Ecozone, the Pine Point Mine was an extensive open pit operation that underwent little reclamation when it shut down in 1988. We apply remote sensing and landscape ecology methods to quantify land cover change in the 20 years following the mine's closure. Using a time series of near-anniversary Landsat images, we performed a supervised classification to differentiate seven land cover classes. We used raster algebra and landscape metrics to track changes in land cover composition and configuration in the 20 years since the mine shut down. We compared our results with a site in Wood Buffalo National Park that was never subjected to extensive anthropogenic disturbance. This space-for-time substitution provided an analog for how the ecosystem in the Pine Point region might have developed in the absence of industrial mineral development. We found that the dense conifer class was dominant in the park and exhibited larger and more contiguous patches than at the mine site. Bare land at the mine site showed little conversion through time. While the combination of raster algebra and landscape metrics allowed us to track broad changes in land cover composition and configuration, improved access to affordable, high-resolution imagery is necessary to effectively monitor land cover dynamics at abandoned mines.

  9. THE CONCENTRATION OF THE CAPITAL IN THE COAL MINING INDUSTRY FROM JIU VALLEY IN THE 30s OF THE XX CENTURY

    Directory of Open Access Journals (Sweden)

    MIRCEA BARON

    2015-10-01

    Full Text Available After World War I as a result of the process of "nationalization" of the existing mining companies, of the application of the Law on the commercialization of the economic enterprises of the State of 7 June 1925, of the general trend of creating new industrial companies, in the Jiu Valley will continue operation many mining companies, called upon to exploit the rich coal deposit existing in the basement of the region. To the recovery period and then to momentum of the world economy during the third decade of the twentieth century, follows, however in a specific economic cyclicity, the period of economic crisis of the years 1929-1933. By crisis is also struck still from years 1926-1927, mining and quarrying of coal, and consequently the coal mining from the Jiu Valley, and one of the levers by which those who have led the destinies of this economic complex tried to pull the region out of crisis was the policy of rationalization, through which was aimed, primarily, a decrease in material costs through a better organization of work and through a renewal of the fixed capital based on the new technique that allowed an increase in labor productivity. Not in the least, it is accented in this period the concentration process of production and capital, either through mergers or by seizing small mining companies or undertakings, whether by purchase of land in order to form large mining complexes.

  10. 玻利维亚矿业管理体制与税费制度%Discussion on administration system and taxation system of mining industry in Bolivia

    Institute of Scientific and Technical Information of China (English)

    于银杰; 赵宏军

    2013-01-01

    This paper introduces the administration system of mining industry in Bolivia. The system has the common characteristics with South American countries;and they have divided the mining activities into basic mining activities and mining auxiliary activities, which have been subject to different laws. At the same time, national mining companies have directly involved in mining management which epitomized the nationalism over mineral resources. In terms of mineral right, there is no mineral exploration right or exploitation right in Bolivia.%  玻利维亚矿业管制体制具有南美国家共同的特点,将矿业活动分为基础矿业活动与矿业辅助活动,并适用不同的法律,同时国家矿业公司直接参与矿业管理,是矿产资源民族主义的集中体现。玻利维亚矿业权没有探矿权、采矿权之分,是其有别于大多数国家的重要特点。相对于其矿业开发环境保护的相关规定,玻利维亚矿业税费总体上比较简单,集中体现在矿业权特许费上。

  11. The need for sustainable technology diffusion in mining: Achieving the use of belt conveyor systems in the German hard-rock quarrying industry

    Directory of Open Access Journals (Sweden)

    Tobias Braun

    2017-01-01

    Full Text Available The movement of raw materials can be one of the most challenging tasks in open pit mining, with truck transportation representing the largest factor in mining costs and resulting in major greenhouse gas (GHG emissions. In this study, the transportation methods of bulk materials within German hard-rock open pit mines were investigated. Approximately 450 quarries were studied for their production tonnage, lease areas, mined rock type as well as mining methods and processing equipment. The results demonstrate that 90% of the operations use truck-based transportation methods, with the remainder relying partly or completely on continuous conveyor-based systems. The installation of continuous conveyors compared to trucks represents a real alternative because of reduced dead load, reduced GHG emissions and in many cases even reduced costs. Thus, for in-pit haulage in quarries sustainable technology substitutions exist that are yet to be adopted by the German quarrying industry. As this study shows, in the future the diffusion of sustainable technologies requires site champions and large-scale case studies that demonstrate their successful introduction in the mining value chain.

  12. Magnetic signature of overbank sediment in industry impacted floodplains identified by data mining methods

    Science.gov (United States)

    Chudaničová, Monika; Hutchinson, Simon M.

    2016-11-01

    Our study attempts to identify a characteristic magnetic signature of overbank sediments exhibiting anthropogenically induced magnetic enhancement and thereby to distinguish them from unenhanced sediments with weak magnetic background values, using a novel approach based on data mining methods, thus providing a mean of rapid pollution determination. Data were obtained from 539 bulk samples from vertical profiles through overbank sediment, collected on seven rivers in the eastern Czech Republic and three rivers in northwest England. k-Means clustering and hierarchical clustering methods, paired group (UPGMA) and Ward's method, were used to divide the samples to natural groups according to their attributes. Interparametric ratios: SIRM/χ; SIRM/ARM; and S-0.1T were chosen as attributes for analyses making the resultant model more widely applicable as magnetic concentration values can differ by two orders. Division into three clusters appeared to be optimal and corresponded to inherent clusters in the data scatter. Clustering managed to separate samples with relatively weak anthropogenically induced enhancement, relatively strong anthropogenically induced enhancement and samples lacking enhancement. To describe the clusters explicitly and thus obtain a discrete magnetic signature, classification rules (JRip method) and decision trees (J4.8 and Simple Cart methods) were used. Samples lacking anthropogenic enhancement typically exhibited an S-0.1T 0.5. Samples with relatively stronger anthropogenic enhancement were unequivocally distinguished from the samples with weaker enhancement by an SIRM/ARM > c. 150. Samples with SIRM/ARM in a range c. 126-150 were classified as relatively strongly enhanced when their SIRM/χ > 18 000 A m-1 and relatively less enhanced when their SIRM/χ 6 per cent from anthropogenically enhanced clusters as samples with natural magnetic enhancement. The characteristics of the clusters resulted mainly from the relationship between SIRM/ARM and

  13. Typical whole body vibration exposure magnitudes encountered in the open pit mining industry.

    Science.gov (United States)

    Howard, Bryan; Sesek, Richard; Bloswick, Don

    2009-01-01

    According to recent research, a causal link has been established between occupational exposure to whole body vibration and an increased occurrence of low back pain. To aid in the further development of an in-house health and safety program for a large open pit mining facility interested in reducing back pain among its operators, whole body vibration magnitudes were characterized for a range of jobs. Specifically, thirty-five individual jobs from five different areas across the facility were evaluated for tri-axial acceleration levels during normal operating conditions. Tri-axial acceleration magnitudes were categorized into thirteen job groups. Job groups were ranked according to exposure and compared to the ISO 2631-1 standard for health risk assessment. Three of the thirteen job groups produced tri-axial acceleration magnitudes below the ISO 2631-1 low/moderate health caution limit for a twelve hour exposure. Six of the thirteen job groups produced exposures within the moderate health risk range. Four job groups were found to subject operators to WBV acceleration magnitudes above the moderate/high health caution limit.

  14. Governance of project management and capital investments: A case study in Brazil’s mining industry

    Directory of Open Access Journals (Sweden)

    Jose Antonio Sousa Neto

    2012-12-01

    Full Text Available The objective of this paper is to present the results of a survey carried out to evaluate the application of corporate governance practices in the management of capital investments and projects by a Brazilian iron ore mining company in 2011. It addresses the main concepts related to projects and corporate governance, as well as the impacts of the Sarbanes-Oxley Act of 2002 on project management. Data were analyzed and processed using descriptive statistics. It was found that the four core disciplines of project governance: portfolio management, project sponsorship, project management, disclosure and reporting, are present in the organization’s management framework, including the application of controls necessary to ensure the accuracy of financial analysis and future cash flows from the successful completion of capital projects. On the other hand, a discrepancy was found in the disproportionate allocation of resources and staff to mega project management compared to small and medium projects which, as a result, are not completed on schedule and within budget. Deficiencies were also found in the attribution of priorities within the organization’s project portfolio.

  15. Controlling of the gas emissions at high performance longwalls in the German hard coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, J. [Deutsche Montan Technologie GmbH (Germany)

    2001-07-01

    In order to enhance productivity in German hard coal mining the total number of workings was reduced and at the same time the output per working point was increased considerably. The average output per working point rose to more than 10,000 t/d with top values of 18,000 t/d in single places. This was achieved by increasing the advance rate and lengthening the face to 450 m. At high performance faces, especially in seams with medium and high gas content rates, the gas inflow can easily become a safety risk and an obstacle to productivity. This paper gives an abstract about the tested techniques and introduces new approaches to the control of gas emission at high performance faces. Essential measures in the control of gas emission for high performance faces are: - pre-degasification of the working seam; optimization of conventional gas drainage; drilling of long deflected boreholes in the gas emission zone of workings (being currently tested); application of effective drilling techniques for rapid preparation of gas drainage boreholes (percussion drilling); selection of the optimal ventilation layout and; building a partially permeable roadside pack (gas windows). 8 refs., 13 figs.

  16. [Report on health status of residents in areas with industrial, mining or military sites in Sardinia, Italy].

    Science.gov (United States)

    Biggeri, Annibale; Lagazio, Corrado; Catelan, Dolores; Pirastu, Roberta; Casson, Felice; Terracini, Benedetto

    2006-01-01

    The work described in the present report has been requested by the Secretary of Hygiene, Health and Social Welfare of the Sardinia Region (Italy). It has been carried out by the Regional Epidemiological Observatory within the domain of ESA (Epidemiology Development and Environment) and with the support of the European Union. Eighteen areas (for a total of 73 municipalities) were identified a priori as "potentially polluted", accounting for a population of 917,977 in 2001 census (56% of the total population of Sardinia). The areas have been named after the most important town, as listed below (in brackets rounded 2001 population), major activities in industrial areas are briefly described. Portoscuso (59,000). Processing of aluminium and other metals. Foundry. Power plants. Dismissed mines (mainly coal mining, lead, zinc). Plants for storing and treating special wastes. Italian Law 349/1986 classified this area as "at high risk of environmental crisis" and classified some plants as being "at high technological risk" (Norma Seveso Decree 334/1999). The area is part of the Sulcis National Restoration site. San Gavino (24,000). Industrial and commercial activities. Lead and zinc foundry. Dairy factories. Food industry. Sarroch (52,000). Petrochemical and refinery industry. Power plants. Mining. Incinerator. Plants for storing and treating special wastes. Gas and mineral oil deposits. Ottana (15,000). Chemical industry. Production of plastics and synthetic fibres. Denim production. Porto Torres (168,000). Chemical industry: production of basic chemicals (benzene, toluene, ethylene, propylene and others), polyethylene, elastomers and vinyl chloride. Textile industry. First and second category landfills. Some plants have been classified "at high technological risk" (Norma Seveso Decree 334/1999). The area is a National Restoration site. The town of Sassari is included. Tortolì (23,000). Construction of steel structures for offshore facilities of the oil and gas industry

  17. Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry. [Indiana

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T.

    1973-01-01

    The author has identified the following significant results. The Mined Land Inventory map of Pike, Gibson, and Warrick Counties, Indiana, prepared from ERTS-1 imagery, was included in the 1973 Annual Report of the President's Council on Environmental Quality as an example of ERTS applications to mined lands. Increasing numbers of inquiries have been received from coal producing states and coal companies interested in the Indiana Program.

  18. Assessment of the effluent quality from a gold mining industry in Ghana.

    Science.gov (United States)

    Acheampong, Mike A; Paksirajan, Kannan; Lens, Piet N L

    2013-06-01

    The physical and chemical qualities of the process effluent and the tailings dam wastewater of AngloGold-Ashanti Limited, a gold mining company in Ghana, were studied from June to September, 2010. The process effluent from the gold extraction plant contains high amounts of suspended solids and is therefore highly turbid. Arsenic, copper and cyanide were identified as the major pollutants in the process effluent with average concentrations of 10.0, 3.1 and 21.6 mg L(-1), respectively. Arsenic, copper, iron and free cyanide (CN(-)) concentrations in the process effluent exceeded the Ghana EPA discharge limits; therefore, it is necessary to treat the process effluent before it can be discharged into the environment. Principal component analysis of the data indicated that the process effluent characteristics were influenced by the gold extraction process as well as the nature of the gold-bearing ore processed. No significant correlation was observed between the wastewater characteristics themselves, except for the dissolved oxygen and the biochemical oxygen demand. The process effluent is fed to the Sansu tailings dam, which removes 99.9 % of the total suspended solids and 99.7 % of the turbidity; but copper, arsenic and cyanide concentrations were still high. The effluent produced can be classified as inorganic with a high load of non-biodegradable compounds. It was noted that, though the Sansu tailings dam stores the polluted effluent from the gold extraction plant, there will still be serious environmental problems in the event of failure of the dam.

  19. Use of microbes for cost reduction of metal removal from metals and mining industry waste streams

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, R.R.H. [Colorado School of Mines, Golden, CO (United States). Division for Environmental Science & Engineering

    2006-07-01

    Acid-rock drainage (ARD) - also known as acid-mine drainage (AMD) - results from the exposure of sulfide minerals, particularly pyritic and pyrrhotitic minerals, to atmospheric oxygen and water. Recent developments and improvements have resulted in construction of bioreactors that have a smaller footprint, and treat the metals and acidity more effectively. Many studies have demonstrated that the primary removal mechanisms for the metals are sulphate-reducing bacteria (SRB). These microbes facilitate the conversion of sulphate to sulphide. The sulphides react with metals to precipitate them as metal sulfides, many of which are stable in the anaerobic conditions of the treatment system. Plants have been shown to remove metals by uptake or oxidative precipitation near the roots. Plants seem to account for only a small percentage of the metal removal capacity of the wetland treatment systems. Adsorption of metals to the organic substrates of the treatment systems can result in metal removal, but adsorption capacity is saturated in short periods of time. The SRB are obligate anaerobes which prefer conditions between pH 5 and 8. Thus, the input water characteristics could impact the efficiency and life expectancy of the treatment systems. The most important characteristic of input waters seems to be pH. Oxyanions such as chromate and arsenate can be removed using the wetland treatment system (passive bioreactor) technology. Arsenic is removed as an arsenic sulfide compound and chromate is reduced to Cr(III) and precipitated as a hydroxide. The passive bioreactor - wetland treatment system offers a less expensive alternative to the conventional chemical precipitation technologies. There still are problems of system hydraulics and useful life to be addressed.

  20. Mining in the Federal Republic of Germany 2012. Mining industries and statistics. 64th year 2013. Documentation; Der Bergbau in der Bundesrepublik Deutschland 2012. Bergwirtschaft und Statistik. 64. Jahrgang 2013. Dokumentation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-11-15

    The annual report of the series ''The mining industry in the Federal Republic of Germany - Mountain Economics and Statistics'' is published by the Federal Ministry of Economics and Technology in cooperation with the mining authorities of the federal states. It contains comprehensive data of all production facilities of mining industry in Germany and describes the position of the German industry in the context of the overall economic development. The report shows an interest in local raw materials as well as on the international raw materials economy. Moreover, the present publication provides a detailed statistics section. [German] Der Jahresbericht in der Reihe ''Der Bergbau in der Bundesrepublik Deutschland - Bergwirtschaft und Statistik'' wird vom Bundesministerium fuer Wirtschaft und Technologie in Zusammenarbeit mit den Bergbehoerden der Bundeslaender herausgegeben. Er enthaelt umfassende Daten aller Produktionsbetriebe des Bergbaus in Deutschland und beschreibt die Lage des deutschen Bergbaus im Zusammenhang mit der gesamtwirtschaftlichen Entwicklung. Der Bericht geht sowohl auf heimische Rohstoffe als auch auf die internationale Rohstoffwirtschaft ein. Darueber hinaus liefert die vorliegende Publikation einen ausfuehrlichen Statistikteil.

  1. The Spatial Footprint of the Non-Ferrous Mining Industry in Lubumbashi

    Directory of Open Access Journals (Sweden)

    Vranken, I.

    2013-01-01

    Full Text Available In the south-eastern part of the Katanga Province (Democratic Republic of the Congo, high concentrations of copper and cobalt are found in the soils of the well-known "Copper Belt". Due to dominant south-eastern winds, the metallurgic industry in Lubumbashi has been the source of spatially concentrated atmospheric deposits of nonferrous metal particles and associated substances in a cone-shaped zone, situated north-west of the metal processing site. The existence of this zone has been evidenced using two different techniques: firstly, by means of landscape metric comparisons of the vegetation and bare soil patterns in two study areas, one inside the pollution cone and one outside; secondly, by means of the city perception theory developed by Kevin Lynch. Higher fragmentation and lower vegetation presence were observed inside the pollution cone, reflecting the negative impact of the atmospheric deposits. Those differences were higher for sites closer to the emission source. Lynch's approach outlined the negative impact of diverse industrial plants on the perception of the local population. Six pollution districts and several contaminated paths, limits, nodes and polluting landmarks were identified. Citizens even recognize them as part of the collective image of the city.

  2. 浅谈复杂场地煤矿工业广场布置%Discussion on the layout of mine industrial site in complex area

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    The article introduced the principle of mine general layout in different terrain conditions.Combined with mine process features, by comparing multiple vertical and plane layout methods, the optimum layout plan of mine industrial site in different terrain conditions was designed.%介绍了不同地形条件煤矿总平面布置,对在沟谷内,狭长沟道、自然地形高差较大等复杂地形下,利用多种竖向及平面方法,结合既有条件和煤矿工艺特点获得的最佳设计方案。

  3. Estimates and Predictions of Coal Workers' Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study.

    Science.gov (United States)

    Han, Bing; Liu, Hongbo; Zhai, Guojiang; Wang, Qun; Liang, Jie; Zhang, Mengcang; Cui, Kai; Shen, Fuhai; Yi, Hongbo; Li, Yuting; Zhai, Yuhan; Sheng, Yang; Chen, Jie

    2016-01-01

    This research was aimed at estimating possible Coal workers' pneumoconiosis (CWP) cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males' life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China.

  4. Estimates and Predictions of Coal Workers’ Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study

    Science.gov (United States)

    Han, Bing; Liu, Hongbo; Zhai, Guojiang; Wang, Qun; Liang, Jie; Zhang, Mengcang; Cui, Kai; Shen, Fuhai; Yi, Hongbo; Li, Yuting; Zhai, Yuhan; Sheng, Yang; Chen, Jie

    2016-01-01

    This research was aimed at estimating possible Coal workers’ pneumoconiosis (CWP) cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males’ life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China. PMID:26845337

  5. American mines, methods and men

    Energy Technology Data Exchange (ETDEWEB)

    Walker, S.C.A. (Thames Water Utilities (UK))

    1992-04-01

    The paper is based on the author's visits to a number of American mines, to see their mining machinery and to discuss with mine management their industrial relations problems. The paper gives a brief review of American mines, methods and men and is in the form of a diary. Mines visited are: Ohio Valley Coal Company; Big John Mine; Pittsburgh Research Center of the US Bureau of Mines; Martinka Mine; Robin Hood Complex No 9 Mine (Boone County, West Virginia), Green Briar Mine (Virginia); Martin County Coal (Kentucky); Wabash Mine (Keensburgh, Illinois); Galatia Mine (Harrisburgh, Illinois); and William Station Mine (Sturgis, Kentucky). Details given include mining methods productivity and staffing levels. The mining machinery is described in detail in a separate article. 5 figs.

  6. Condition of forest ecosystems in the zone of aerial emissions’ impact of the Norilsk mining and metallurgical industrial complex. First communication

    Directory of Open Access Journals (Sweden)

    R. A. Ziganshin

    2017-06-01

    Full Text Available In the study, based on the analysis of literary sources and the own research materials, the characteristic of the environmental situation in Taimyr is done, in connection with aerial technogenic impact of the Norilsk mining and metallurgical industrial complex. The dynamics of forest condition over the past decade in the area close to 200 km or more from the plant were evaluated. The analysis was performed taking into account the landscape structure of the territory. The progressive drying of the large areas of the northern forests since the early 80 is registered. In the article, according to the literature reviewed, the structure, dynamics and distribution of air industrial emissions of the Norilsk mining and metallurgical industrial complex «Norilsk Nickel» is analyzed and presented. Further, the authors considered the impact of air industrial emissions of Norilsk industrial region on the forest ecosystems of Taimyr. The focus is on the main forest-forming tree – Siberian larch Larix sibirica Ledeb. It is noted the complete absence of the larch undergrowth in the area of industrial pollution. Investigation of the technogenically damaged forests was carried out on the basis of dendrochronological research at six different points on different distances from the city of Norilsk, mainly to the south and east of the metallurgical plant. One study point (sparse larch community is located 5 km north-west of Norilsk. We investigated stands of varying degrees of damage, including completely dead. It is shown, that outside the area of Norilsk mining and metallurgical industrial complex impact there were no signs of damage to the foliage of the trees and on the contrary, in the area of air pollution (Khantaiskoe Lake, forest stands are largely affected. The main damaging agent is sulfur dioxide.

  7. Maintenance Free and Sustainable High-Level Control in Cement and Mining Industry

    DEFF Research Database (Denmark)

    Hansen, Ole Fink

    2009-01-01

    High-level control systems have been utilized in the process industry for decades, and also in cement production their use is well established. In comparison to manual control their ability to increase production and quality of end product, while reducing energy consumption and emission, is well...... that navigating the source code, understanding the interaction of signals and tracking down the statement in the code responsible for the problem is the issues which require expert knowledge and they are very time consuming. In contrast, it is relatively simple to conduct the actual modification once the few...... to be logged is compatible with the storage capacity of current computers. Preliminary statistical analysis of the logged data shows that normal and abnormal behavior of a real-world control algorithm can be distinguished so an alarm can be raised. The method enables backtracking of signal dependencies...

  8. A data mining method for service marketing: A case study of banking industry

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Taghva

    2011-07-01

    Full Text Available One of the most important objectives of any modern organization is to gain competitive advantage of customers' data. In order to find hidden patterns or models from data, application of modern and steady methodologies is a necessity. Banking industry is not exceptional from this trend and they may often wish to make more profit by providing appropriate services to potential customers. Analyzing databases to manage customer behaviors seems difficult since databases are multi-dimensional, comprised of monthly account records and daily transactional records. Therefore, to analyze databases, we propose a methodology by considering human factors and building an integrated data utilization system. Moreover, self-organizing neural network map is used to identify groups of customers based on repayment behavior, recency, frequency, and monetary behavioral scoring predicators. We also perform more analysis using Apriori association rule to make marketing strategies for services used by banks.

  9. Study of the application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

    1972-01-01

    The author has identified the following significant results. Various data compilation and analysis activities in support of ERTS-1 imagery interpretation are in progress or are completed. These include the compilation of mine accident data, areas of mine roof instability and the analysis of high altitude color infrared photography and low altitude color and color infrared photography which was acquired by NASA in support of the project. The photography reveals that many fracture lineaments are detectable through a varied thickness of glacial till. These data will be compiled on a series of 1:250,000 scale base maps and evaluated for a correlation between fracture zones and mine accidents and rooffalls. Due to high occurrence of cloud cover in the project area and to the delay in imagery shipments, little progress has been made in the analysis of ERTS-1 imagery.

  10. Pattern extraction for high-risk accidents in the construction industry: a data-mining approach.

    Science.gov (United States)

    Amiri, Mehran; Ardeshir, Abdollah; Fazel Zarandi, Mohammad Hossein; Soltanaghaei, Elahe

    2016-09-01

    Accidents involving falls and falling objects (group I) are highly frequent accidents in the construction industry. While being hit by a vehicle, electric shock, collapse in the excavation and fire or explosion accidents (group II) are much less frequent, they make up a considerable proportion of severe accidents. In this study, multiple-correspondence analysis, decision tree, ensembles of decision tree and association rules methods are employed to analyse a database of construction accidents throughout Iran between 2007 and 2011. The findings indicate that in group I, there is a significant correspondence among these variables: time of accident, place of accident, body part affected, final consequence of accident and lost workdays. Moreover, the frequency of accidents in the night shift is less than others, and the frequency of injury to the head, back, spine and limbs are more. In group II, the variables time of accident and body part affected are mostly related and the frequency of accidents among married and older workers is more than single and young workers. There was a higher frequency in the evening, night shifts and weekends. The results of this study are totally in line with the previous research.

  11. Genome mining of fungal lipid-degrading enzymes for industrial applications.

    Science.gov (United States)

    Vorapreeda, Tayvich; Thammarongtham, Chinae; Cheevadhanarak, Supapon; Laoteng, Kobkul

    2015-08-01

    Lipases are interesting enzymes, which contribute important roles in maintaining lipid homeostasis and cellular metabolisms. Using available genome data, seven lipase families of oleaginous and non-oleaginous yeast and fungi were categorized based on the similarity of their amino acid sequences and conserved structural domains. Of them, triacylglycerol lipase (patatin-domain-containing protein) and steryl ester hydrolase (abhydro_lipase-domain-containing protein) families were ubiquitous enzymes found in all species studied. The two essential lipases rendered signature characteristics of integral membrane proteins that might be targeted to lipid monolayer particles. At least one of the extracellular lipase families existed in each species of yeast and fungi. We found that the diversity of lipase families and the number of genes in individual families of oleaginous strains were greater than those identified in non-oleaginous species, which might play a role in nutrient acquisition from surrounding hydrophobic substrates and attribute to their obese phenotype. The gene/enzyme catalogue and relevant informative data of the lipases provided by this study are not only valuable toolboxes for investigation of the biological role of these lipases, but also convey potential in various industrial applications.

  12. Bioaccumulation of selected heavy metals by the water fern, Azolla filiculoides Lam. in a wetland ecosystem affected by sewage, mine and industrial pollution

    Energy Technology Data Exchange (ETDEWEB)

    Wet, L.P.D. de; Schoonbee, H.J.; Pretorius, J.; Bezuidenhout, L.M. (Rand Afrikaans University, Johannesburg (South Africa). Depts. of Zoology and Botany, Research Unit for Aquatic and Terrestrial Ecosystems)

    1990-10-01

    The bio-accumulation of the heavy metals, Fe, Cu, Ni, Pb, Zn, Mn and Cr by the water fern, Azolla filiculoides Lam. in a wetland ecosystem polluted by effluents from sewage works, mines and industries was investigated. Results showed that the different metals can be accumulated by the water fern at concentration levels not necessarily related to their actual concentrations in the aquatic environment, as measured in this case, in the bottom sediments. 45 refs., 1 fig., 3 tabs.

  13. [Specific features of the development of pathology of the upper respiratory tracts in the workers employed in the ore mining industry in the subarctic regions].

    Science.gov (United States)

    Fedina, I N; Sineva, E L

    2009-01-01

    Criteria for the risk of development of occupational pathology of the upper respiratory tracts in the workers employed in the ore mining industry have been proposed based on the results of evaluation of the occurrence of pathological changes, morpho-functional characteristics of upper respiratory tract mucosa, and immunological properties. These criteria provide a basis for the development of differential approach to the choice of priority hygienic and medical preventive measures designed to a lower the risk of respiratory organ pathology.

  14. 山东煤炭工业充填开采研究与实践%Research and practice on backfill mining in Shandong coal industry

    Institute of Scientific and Technical Information of China (English)

    乔乃琛

    2015-01-01

    为了推进煤炭工业绿色发展、煤炭清洁高效利用,促进煤炭工业循环可持续发展,分析、研究了山东省煤炭行业实施充填开采的必要性和可行性,通过多种途径转变煤炭生产方式,优化、引导、规范和扶持煤炭企业实施充填开采。%In order to promoting green development of coal industry,efficient utilization of clean coal mining and sustainable development of coal industry circle,the authors introduced and studied necessity and feasibility of backfill mining in Shandong coal industry,furthermore,ac-cording to various channels to change coal production mode,and also optimized,guided,stand-ardized and supported implement backfill mining for coal enterprises.

  15. Evaluation of the current practices of noise-induced hearing loss (NIHL) awareness training in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2015-01-01

    Full Text Available on findings of a literature review on best practice for NIHL awareness training was developed for use in interviews, with managers responsible for NIHL awareness training at the mines. Thirty managers were interviewed in the survey at mines representative...

  16. 数据挖掘技术在烟草行业中的应用%Application of Data Mining Technology in Tobacco Industry

    Institute of Scientific and Technical Information of China (English)

    田临卿; 许自成

    2012-01-01

    As an emerging knowledge discovery technology, data mining technology has been widely used in business, logistics, finance and other industries. This paper introduces the application of data mining technology in tobacco agriculture involving the evaluation of tobacco soil quality and precise fertilization, tobacco species selection, the forecast of tobacco diseases and pests and natural disasters, and the estimation of tobacco yield and tobacco leaf grading. Moreover, the practice of data mining in cigarette warehouse management, cigarette logistics distribution, cigarette marketing and cigarette sensory quality evaluation of raw materials in tobacco industrial management are also described. The paper also prospects the future for applying data mining technology, so as to promote its applications in tobacco industry, and enhance the competitiveness of tobacco enterprises in the market.%数据挖掘技术作为一种新兴的知识发现技术,已经在商业、物流、金融业等行业有了广泛的应用.介绍了数据挖掘在植烟土壤评价及精准施肥、烟草品种选育、烟田病虫害与自然灾害预测、烟叶采收估产、烟叶分级等烟草农业生产中的应用;以及在卷烟成品仓储管理系统、卷烟物流配送、卷烟营销、卷烟原料感官质量评价等烟草工业管理中的应用,并对其应用前景进行了展望,以推动其在烟草行业中的应用,提升烟草企业市场竞争力.

  17. 1834 till 2009 - review of 175 years of wire rope development and application in the mining industry; 1834 bis 2009 - Rueckblick auf 175 Jahre Drahtseilentwicklung und Anwendung im Bergbau

    Energy Technology Data Exchange (ETDEWEB)

    Dill, Rainer [Verein fuer Technische Sicherheit und Umweltschutz e.V. (TSU), Gotha (Germany); DMT GmbH und Co. KG, Leipzig (Germany)

    2010-03-15

    Inspector of Mines Albert is the main focus of attention in this contribution. Hence in particular the creative and technically brilliant work since his entry into the Harz mining industry are described in addition to his career. Thanks to his untiring efforts a usable wire rope was introduced into mining industry for the first time in 1834. However, the inventive genius and technical skill of Muehlenpfordt and Mummenthey, employees of the Koenigshuette in Lauterberg, also deserve praise, because they were the first to supply suitable wires for the manufacture of a rope. (orig.)

  18. [The role, objectives and usefulness of medico-legal determinations in post-accidental procedures in traumatic deaths in hard coal-mining industry].

    Science.gov (United States)

    Skowronek, Rafał; Chowaniec, Czesław

    2009-01-01

    The underground hard coal-mining sector demonstrates one of the highest rates of fatal accidents, in spite of a decline in coal-mining over the last few years. Post-accidental investigations, including forensic medical expertise, continue to present a significant problem. The objective of the research was to evaluate the role, tasks and usefulness of medico-legal determinations in post-accidental procedures in traumatic deaths in hard coal-mining industry. The study was carried out retrospectively by investigating files and autopsy reports, with attention focusing on the scope of necessary activities and medico-legal examinations in order to determine the cause and manner of death, and on identification of fatalities, especially in the cases of collective occupational accidents. Complex medico-legal determinations (identification, autopsy), supplemented by additional investigations (toxicology, histopathology and hemogenetics) provide a valuable source of evidence for legal authorities and post-accidental commissions. Mutual cooperation of the experts representing various branches of science is the basis of executing appropriate procedures after a traumatic death in the coal mine.

  19. Restoration Practices Used on Post Mining Sites and Industrial Deposits in the Czech Republic with an Example of Natural Restoration of Granodiorite Quarries and Spoil Heaps

    Directory of Open Access Journals (Sweden)

    Chuman Tomáš

    2015-11-01

    Full Text Available Mining of minerals that have significant impact on landscape and landscape functions affects 1% of the land surface worldwide. In the Czech Republic the extent of mining sites is estimated to be more than 800 km2 and according to the state legislation the land affected by mining should be reclaimed. There are several approaches to land restoration, which are shortly reviewed in this article, from pure technical approach to one adopting natural processes. The review shows increasing appeal of scientist and conservationist to use natural processes e.g. natural or directed succession as an alternative method of post-mining sites or industrial deposits restoration due to growing evidence of conservational value of such sites in human dominated landscapes. The natural processes used for land restoration are often argued to be slow therefore the rate of spontaneous vegetation succession was assessed in stone quarries and on spoil heaps using a sequence of panchromatic aerial images. The results showed that natural processes act fast and vegetation can reach 100% cover within 10-15 years in granodiorite quarries and on spoil heaps.

  20. Interaction of silicene and germanene with non-metallic substrates

    Science.gov (United States)

    Houssa, M.; Scalise, E.; van den Broek, B.; Lu, A.; Pourtois, G.; Afanas'ev, V. V.; Stesmans, A.

    2015-01-01

    By using first-principles simulations, we investigate the interaction of silicene and germanene with various non-metallic substrates. We first consider weak van der Waals interactions between the 2D layers and dichalcogenide substrates, like MoX2 (X=S, Se, Te). The buckling of the silicene or germanene layer is correlated to the lattice mismatch between the 2D material and the MoX2 template. The electronic properties of silicene or germanene on these different templates then largely depend on the buckling of the 2D material layer: highly buckled silicene or germanene on MoS2 are predicted to be metallic, while low buckled silicene on MoTe2 is predicted to be semi-metallic, with preserved Dirac cones at the K points. We next study the covalent bonding of silicene and germanene on (0001) ZnS and ZnSe surfaces. On these substrates, silicene or germanene are found to be semiconducting. Remarkably, the nature and magnitude of their energy band gap can be controlled by an out-of-plane electric field.

  1. Mining and robotized equipment

    Energy Technology Data Exchange (ETDEWEB)

    Krisztian, B.

    1984-01-01

    The general concepts about the expedience of using industrial robots (PR) in mining and about the most rational fields of their use are cited. The achievements in creating industrial robots for the needs of the mining industry in the USSR, Sweden (the ASEA Company), in the United States (Westinghouse Electric and Cincinnati Milacron Companies) and in Japan (the Fupitsu Fanuk Company) are noted. The necessity in a whole number of cases of a fundamental restructuring of the productive processes with respect to the planned introduction of industrial robots in mining enterprises is stressed. The questions associated with the necessity for changes introduced into systems for automating industrial processes with the introduction of industrial robots into them are also discussed. The prospects for the development, creation and introduction of industrial robots in the Hungarian (VNR) mining industry are indicated in conclusion.

  2. Capturing coupled riparian and coastal disturbance from industrial mining using cloud-resilient satellite time series analysis

    Science.gov (United States)

    Alonzo, Michael; van den Hoek, Jamon; Ahmed, Nabil

    2016-10-01

    The socio-ecological impacts of large scale resource extraction are frequently underreported in underdeveloped regions. The open-pit Grasberg mine in Papua, Indonesia, is one of the world’s largest copper and gold extraction operations. Grasberg mine tailings are discharged into the lowland Ajkwa River deposition area (ADA) leading to forest inundation and degradation of water bodies critical to indigenous peoples. The extent of the changes and temporal linkages with mining activities are difficult to establish given restricted access to the region and persistent cloud cover. Here, we introduce remote sensing methods to “peer through” atmospheric contamination using a dense Landsat time series to simultaneously quantify forest loss and increases in estuarial suspended particulate matter (SPM) concentration. We identified 138 km2 of forest loss between 1987 and 2014, an area >42 times larger than the mine itself. Between 1987 and 1998, the rate of disturbance was highly correlated (Pearson’s r = 0.96) with mining activity. Following mine expansion and levee construction along the ADA in the mid-1990s, we recorded significantly (p < 0.05) higher SPM in the Ajkwa Estuary compared to neighboring estuaries. This research provides a means to quantify multiple modes of ecological damage from mine waste disposal or other disturbance events.

  3. [The characteristics of the body's functional status and the state of the health of pupils in mining trade schools in an industrial zone].

    Science.gov (United States)

    Kharkovenko, N M; Borisova, E V; Podgaĭskaia, A P; Bolonova, L N; Raksha-Sliusareva, E A; Kiian, V D

    1996-01-01

    The article presents results of study into the level of physical development, condition of the cardiovascular-, respiratory-, central nervous systems, immunobiologic resistance of the organism, prevalence of morphofunctional deviations from the norm, and morbidity rates among the students of the mining-trade secondary school (aged 15-18). It has been found out that adverse ecological situation in urban centres of the Donetsk Province together with specific character of training for occupation in coal industry have a marked negative effect on the functional status as well as health status of the adolescents. On the basis of the studies made a complex of measures has been designed to maintain and promote the health of students of the mining-trade secondary schools.

  4. China mining industry city low carbon economy development route research%我国矿业城市低碳经济发展路径研究

    Institute of Scientific and Technical Information of China (English)

    周进生; 王浦

    2012-01-01

    我国矿业城市经济发展面临着双重难题,既要保证为国家所需矿产品的稳定供应,还需要寻求自身可持续发展路径。低碳经济发展是以低能耗、低污染、低排放为基础的绿色经济发展模式,可以有效缓解矿业城市过于依赖资源型产业和生态环境污染严重的发展难题。文章通过借鉴国外城市经济发展过程中的经验教训,分析我国矿业城市经济结构特征和发展方式,提出符合矿业城市特点的低碳发展策略。%The mining cities in our country need not only to provide products to meet the national minerals and energy demand,but also need to explore their own paths of sustainable development.Low carbon economy is an important sustainable development model.By promoting the development of low carbon economy,the problem that the mining cities over-depend on resources industry and heavily pollute the ecological environment can be solved effectively.Based on the analysis of characteristics of mining cities’ economic structure,development mode,city industry,environment,development path and system,etc,this article puts forward the low carbon development path which corresponds to mining cities.

  5. Materials damaging and rupture - Volumes 1-2. General remarks, metallic materials. Non-metallic materials and biomaterials, assemblies and industrial problems;Endommagement et rupture des materiaux - Volumes 1-2. Generalites, materiaux metalliques. Materiaux non metalliques et biomateriaux, assemblages et problemes industriels

    Energy Technology Data Exchange (ETDEWEB)

    Clavel, M.; Bompard, P.

    2009-07-01

    The rupture and damaging of materials and structures is almost always and unwanted events which may have catastrophic consequences. Even if the mechanical failure causes can often be analyzed using a thorough knowledge of materials behaviour, the forecasting and prevention of failures remain difficult. While the macroscopic mechanical behaviour is often the result of average effects at the structure or microstructure scale, the damage is very often the result of the combination of load peaks, of localization effects and of microstructure defects. This book, presented in two volumes, takes stock of the state-of-the-art of the knowledge gained in the understanding and modelling of rupture and damaging phenomena of materials and structure, mostly of metallic type. It gives an outline of the available knowledge for other classes of materials (ceramics, biomaterials, geo-materials..) and for different types of applications (aeronautics, nuclear industry). Finally, it examines the delicate problem, but very important in practice, of the behaviour of assemblies. Content: Vol.1 - physical mechanisms of materials damaging and rupture; rupture mechanics; cyclic plasticity and fatigue crack growth; fatigue crack propagation; environment-induced cracking; contacts and surfaces. Vol.2 - glasses and ceramics; natural environments: soils and rocks; mechanical behaviour of biological solid materials: the human bone; contribution of simulation to the understanding of rupture mechanisms; assemblies damaging and rupture; industrial cases (behaviour of PWR pressure vessel steels, and thermal and mechanical stresses in turbojet engines). (J.S.)

  6. MINING IN ECONOMY OF REPUBLIC OF CROATIA

    OpenAIRE

    Željko Matiša

    1996-01-01

    Croatia is not especially rich in mineral ore resources, and therefore it cannot be included into "mining countries". Nevertheless since exploitation of mineral resources is a primary activity in economy of any country, mining in Croatia is given a great significance. In Croatia, research and exploitation of oil and gas is considered to be the most significant. Exploitation of mineral resources for production of metals is negligable, while esploitation of non-metals satisfies the majority ...

  7. Field evaluation of the effectiveness of three industrial by-products as organic amendments for phytostabilization of a Pb/Zn mine tailings.

    Science.gov (United States)

    Yang, Shengxiang; Cao, Jianbing; Li, Fengmei; Peng, Xizhu; Peng, Qingjing; Yang, Zhihui; Chai, Liyuan

    2016-01-01

    Although the potential of industrial by-products as organic amendments for phytostabilization has long been recognized, most of the previous studies addressing this issue have been laboratory-based. In this study, a field trial was conducted to evaluate the effectiveness of three industrial by-products [sweet sorghum vinasse (SSV), medicinal herb residues (MHR) and spent mushroom compost (SMC)] as organic amendments for phytostabilization of abandoned Pb/Zn mine tailings. Our results showed the following: (i) when compared to the control tailings, the mean concentrations of diethylene-triamine-pentaacetic acid (DTPA)-extractable Cd, Cu, Pb and Zn in SSV, MHR and SMC treatments decreased by 20.8-28.0%, 41.6-49.1%, 17.7-22.7% and 9.5-14.7%, respectively; (ii) the mean values of organic C, ammonium-N and available P in SSV, MHR and SMC treatments increased by 1.7-2.8, 10.8-14.9 and 3.9-5.1 times as compared with the mine tailings; and (iii) the addition of SSV, MHR and SMC significantly enhanced soil respiration and microbial biomass being 1.5-1.8 and 1.3-1.6 fold higher than those in the control tailings. There were no significant differences in soil biochemical properties among the plots amended with these by-products, suggesting that they were almost equally effective in improving the biochemical conditions of the tailings. In addition, the application of these amendments promoted seed germination, seedling growth, and consequently increased the vegetation cover and its biomass. Moreover, concentrations of Cd, Cu, Pb and Zn in above-ground parts of the plants were below the toxicity limit levels for animals. The results obtained in this field study confirmed that the three organic-rich industrial by-products could be used as amendments for phytostabilization of some types of mine tailings.

  8. Mining Review

    Science.gov (United States)

    ,

    2013-01-01

    In 2012, the estimated value of mineral production increased in the United States for the third consecutive year. Production and prices increased for most industrial mineral commodities mined in the United States. While production for most metals remained relatively unchanged, with the notable exception of gold, the prices for most metals declined. Minerals remained fundamental to the U.S. economy, contributing to the real gross domestic product (GDP) at several levels, including mining, processing and manufacturing finished products. Minerals’ contribution to the GDP increased for the second consecutive year.

  9. 工矿企业生态工业旅游开发的可行性分析与对策%Feasibility Analysis and Countermeasures for the Exploitation of Ecological Industry Tourism in Industrial and Mining Enterprises

    Institute of Scientific and Technical Information of China (English)

    丁水平

    2014-01-01

    It is an effective approach for industrial and mining enterprises to realize the transformation , recovery , and sustainable development by means of developing positively ecological industry tourism with the industrial herit -age resources , ecological protection , and industry tourism exploitation.Industrial and mining enterprises implement the development of ecological industry tourism by making use of the rich heritage resources , mature development modes, good policy environment , to develop vigorously the characteristic tourism products , to exploit deeply the tourism market.In order to enhance the corporation image , meet the tourism demand , cultivate the ecological con-sciousness , promote the Eco-civilization , realize the sustainable development of the industrial and mining enter-prises, corporations ought to follow the scientific planning and design , highlight the ecological concept , perfect the tourism function , strengthen the service subject.%以工业遗产为资源要素,以生态保护为核心理念,以工业旅游为开发手段,积极发展生态工业旅游,是实现工矿企业转型复苏与可持续发展的有效途径。工矿企业需利用丰富的遗产资源,借鉴成熟的开发模式,依托良好的政策环境,实施生态工业旅游开发,大力开发独具特色的旅游产品,深度开拓旅游市场。开发中遵循科学规划设计,突出生态理念,完善旅游功能,强化服务主体。以期提升企业形象,满足旅游需求,培养生态意识,促进生态文明,实现工矿企业可持续发展。

  10. Mass Casualty Incidents in the Underground Mining Industry: Applying the Haddon Matrix on an Integrative Literature Review.

    Science.gov (United States)

    Engström, Karl Gunnar; Angrén, John; Björnstig, Ulf; Saveman, Britt-Inger

    2017-06-08

    Underground mining is associated with obvious risks that can lead to mass casualty incidents. Information about such incidents was analyzed in an integrated literature review. A literature search (1980-2015) identified 564 modern-era underground mining reports from countries sharing similar occupational health legislation. These reports were condensed to 31 reports after consideration of quality grading and appropriateness to the aim. The Haddon matrix was used for structure, separating human factors from technical and environmental details, and timing. Most of the reports were descriptive regarding injury-creating technical and environmental factors. The influence of rock characteristics was an important pre-event environmental factor. The organic nature of coal adds risks not shared in hard-rock mines. A sequence of mechanisms is commonly described, often initiated by a human factor in interaction with technology and step-wise escalation to involve environmental circumstances. Socioeconomic factors introduce heterogeneity. In the Haddon matrix, emergency medical services are mainly a post-event environmental issue, which were not well described in the available literature. The US Quecreek Coal Mine incident of 2002 stands out as a well-planned rescue mission. Evaluation of the preparedness to handle underground mining incidents deserves further scientific attention. Preparedness must include the medical aspects of rescue operations. (Disaster Med Public Health Preparedness. 2017;page 1 of 9).

  11. Análise de acidentes fatais na mineração: o caso da mineração no Peru Analyzes of fatal accidents in the mining industry: the case of Peruvian mining

    Directory of Open Access Journals (Sweden)

    Renan Collantes Candia

    2009-12-01

    Full Text Available A mineração é uma das atividades industriais que oferecem maior risco; embora nos últimos anos tenham-se percebido reduções na taxa de lesões e acidentes, o seu número e grau de severidade ainda são elevados. As causas fundamentais para as altas taxas de acidentes podem ser atribuídas às condições inseguras e os atos inseguros; nesse cenário, a identificação de problemas de segurança visando à proposta de soluções efetivas para gerenciar riscos faz-se necessária. Por outro lado, a dependência de países em desenvolvimento por indústrias primárias como a mineração é evidente. Na economia peruana, aproximadamente, 16 % do PIB e mais de 50 % das exportações referem-se a esta indústria, destacando sua posição competitiva na mineração mundial. Esse artigo analisa os acidentes fatais na mineração peruana, desde o ano 2000 até maio de 2008. A fonte de informação primária foi o registro de acidentes, disponibilizado pelo Ministério de Energia e Minas do Peru; identificando-se vários tipos de acidentes com destaque para aqueles provocados por queda de rochas em minas subterrâneas. A maioria das vitimas são trabalhadores de empresas terceirizadas prestadoras de serviços especializados. Os resultados mostram que a mineração subterrânea tem maiores riscos do que a de superfície.Mining is one of the indústrial activities that offers greater risks; although in recent years, reduction in the rate of injuries and accidents has been observed, the numbers and degree of severity are high. The basic causes for the high rates can be attributed to unsafe conditions and unsafe acts; in this instance, the identification of security problems aiming to propose effective solutions becomes necessary for risk management. On the other hand, the dependence of developing countries on primary industries such as mining is evident. In the Peruvian economy, approximately 16% of the GIP and more than 50% of the exportations are

  12. Characteristics and Modification of Non-metallic Inclusions in Titanium-Stabilized AISI 409 Ferritic Stainless Steel

    Science.gov (United States)

    Kruger, Dirk; Garbers-Craig, Andrie

    2017-06-01

    This study describes an investigation into the improvement of castability, final surface quality and formability of titanium-stabilized AISI 409 ferritic stainless steel on an industrial scale. Non-metallic inclusions found in this industrially produced stainless steel were first characterized using SEM-EDS analyses through the INCA-Steel software platform. Inclusions were found to consist of a MgO·Al2O3 spinel core, which acted as heterogeneous nucleation site for titanium solubility products. Plant-scale experiments were conducted to either prevent the formation of spinel, or to modify it by calcium treatment. Modification to spherical dual-phase spinel-liquid matrix inclusions was achieved with calcium addition, which eliminated submerged entry nozzle clogging for this grade. Complete modification to homogeneous liquid calcium aluminates was achieved at high levels of dissolved aluminum. A mechanism was suggested to explain the extent of modification achieved.

  13. Characteristics and Modification of Non-metallic Inclusions in Titanium-Stabilized AISI 409 Ferritic Stainless Steel

    Science.gov (United States)

    Kruger, Dirk; Garbers-Craig, Andrie

    2017-02-01

    This study describes an investigation into the improvement of castability, final surface quality and formability of titanium-stabilized AISI 409 ferritic stainless steel on an industrial scale. Non-metallic inclusions found in this industrially produced stainless steel were first characterized using SEM-EDS analyses through the INCA-Steel software platform. Inclusions were found to consist of a MgO·Al2O3 spinel core, which acted as heterogeneous nucleation site for titanium solubility products. Plant-scale experiments were conducted to either prevent the formation of spinel, or to modify it by calcium treatment. Modification to spherical dual-phase spinel-liquid matrix inclusions was achieved with calcium addition, which eliminated submerged entry nozzle clogging for this grade. Complete modification to homogeneous liquid calcium aluminates was achieved at high levels of dissolved aluminum. A mechanism was suggested to explain the extent of modification achieved.

  14. Estimates and Predictions of Coal Workers' Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study.

    Directory of Open Access Journals (Sweden)

    Bing Han

    Full Text Available This research was aimed at estimating possible Coal workers' pneumoconiosis (CWP cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males' life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China.

  15. The Challenge of Integrating OHS into Industrial Project Risk Management: Proposal of a Methodological Approach to Guide Future Research (Case of Mining Projects in Quebec, Canada

    Directory of Open Access Journals (Sweden)

    Adel Badri

    2015-06-01

    Full Text Available Although risk management tools are put to good use in many industrial sectors, some large projects have been met with numerous problems due to failure to take occupational health and safety (OHS into consideration. In spite of the high level of risk and uncertainty associated with many industrial projects, the number of studies of methods for managing all known risks systematically remains small. Under effervescent economic conditions, industries must meet several challenges associated with frequent project start-ups. In highly complex and uncertain environments, rigorous management of risk remains indispensable for avoiding threats to the success of projects. Many businesses seek continually to create and improve integrated approaches to risk management. This article puts into perspective the complexity of the challenge of integrating OHS into industrial project risk management. A conceptual and methodological approach is proposed to guide future research focused on meeting this challenge. The approach is based on applying multi-disciplinary research modes to a complex industrial context in order to identify all scenarios likely to contain threats to humans or the environment. A case study is used to illustrate the potential of the proposed approach for application and its contribution to meeting the challenge of taking OHS into consideration. On-site researchers were able to develop a new approach that helped two mining companies in Quebec (Canada to achieve successful integration of OHS into expansion projects.

  16. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

    Science.gov (United States)

    Grady, Joseph E.

    2015-01-01

    The Non-Metallic Gas Turbine Engine project, funded by NASA Aeronautics Research Institute, represents the first comprehensive evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. This will be achieved by assessing the feasibility of using additive manufacturing technologies to fabricate polymer matrix composite and ceramic matrix composite turbine engine components. The benefits include: 50 weight reduction compared to metallic parts, reduced manufacturing costs, reduced part count and rapid design iterations. Two high payoff metallic components have been identified for replacement with PMCs and will be fabricated using fused deposition modeling (FDM) with high temperature polymer filaments. The CMC effort uses a binder jet process to fabricate silicon carbide test coupons and demonstration articles. Microstructural analysis and mechanical testing will be conducted on the PMC and CMC materials. System studies will assess the benefits of fully nonmetallic gas turbine engine in terms of fuel burn, emissions, reduction of part count, and cost. The research project includes a multidisciplinary, multiorganization NASA - industry team that includes experts in ceramic materials and CMCs, polymers and PMCs, structural engineering, additive manufacturing, engine design and analysis, and system analysis.

  17. Study on establishment of assessment system for regional mining industry investment environment%区域矿业投资环境评估体系构建研究

    Institute of Scientific and Technical Information of China (English)

    朱利明; 沐择凤; 魏娜

    2011-01-01

    为进一步优化区域矿业投资环境,正确认识区域矿业投资环境的内涵,实现区域矿业投资环境的科学化、有效化、产业化,提出了由区域矿业投资环境数据库、评价指标体系以及动态预测体系组成的区域矿业投资环境评估体系。矿业投资者应从实际出发,判断投资利润及风险,作出决策。%To optimize the regional mining industry investment environment further, understand the connotation of mining industry investment environment correctly, and to realize the scientization, effectuation and industrialization of the regional mining industry investment environment, the paper establishes the assessment system for the regional mining industry investment environment, which consists of database, evaluation index system and dynamic prediction system. Mining investors should estimate investment profits and risks according to actual status, so as to make decisions.

  18. Structure and diversity of ground mesofauna inUlmus and Populus consortia in the industrial areas of mining and smelting complex of krivyi rig basin

    Directory of Open Access Journals (Sweden)

    V. V. Kachinskaya

    2010-05-01

    Full Text Available The structure and biological diversity of ground mesofauna on a consortium level of organisation of ecosystems are considered. Indicators of structural organisation and biodiversity of ground mesofauna were analised in Ulmus and Populus consortia in the conditions of industrial territories of mining and smelting complex of Krivyi Rig Basin. It is established that taxonomical structure of ground mesofauna is characterised by insignificant number and quantity of taxonomical groups. Prevalence of hortobionts and herpetobionts in morpho-ecological structure of the community testifies to their attachment to consortium’s determinants and influence of steppe climate on its structure. Dominance of phytophages and polyphages in trophic structure is caused by a combination of consortium determinants specificity and «a zone source» of the fauna formations. The structural organisation of ground mesofauna in consortia of Ulmus and Populus in the conditions of industrial sites is characterised by simplified taxonomical structure with low biodiversity at all levels.

  19. Electric energy saving and its impact in the mining industry; El ahorro de energia electrica y su impacto en la industria minera

    Energy Technology Data Exchange (ETDEWEB)

    Urteaga Dufour, Jose Antonio [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

    1993-12-31

    In this paper are shown the most important results of the energy diagnosis performed in some representative industries of the mining industry, where opportunity areas were detected in electric energy saving, starting from those measures that do not require investment up to the ones that require medium investment, recoverable in less than two years terms as a maximum and with electric energy saving ranging from 10% to 25%. [Espanol] En este trabajo, se presentan los resultados mas importantes, obtenidos en el diagnostico energetico realizado en algunas empresas representativas de la rama de la mineria, en donde se detectaron areas de oportunidad de ahorro de energia electrica que van desde aquellas medidas que no requieren inversiones hasta las que requieren medianas inversiones, recuperables en menos de dos anos como maximo y con ahorros de energia que van desde un 10% hasta un 25%.

  20. 采矿业安全经济贡献率实证研究%Empirical Study on Contribution Rate of Safety Economy in Mining Industry

    Institute of Scientific and Technical Information of China (English)

    陈林; 谭海霞; 王宏图; 吴军; 任唤林

    2011-01-01

    Safety investment is a safeguarding force to mining,and one of main reasons for the increased growth rate of Total Factor Productivity (TFP) as well, To figure out the contribntion of the safety investment to mining economic gnowth,a new production safety index system with six principal items was constructed. The study shows that safety level in China mining production was improved continuously more titan 17 times during 1991-2008. Then the co-integration theory and dynamic construction model was adopted to establish the mining economic growth model. The empirical results indicated that the investment of labor and capital are still major factors to promote economic growth of mining in our country. The production safety index not only contributed the short-term GDP growth of mining industry, but promoted the long-erm elasticity coefficient at 8.8%,%安全投入不仅是采矿业的保障要素,也是促进全要素增加率增长的重要因素.为了弄清安全投入对经济增长的贡献,构造了一个以6个分指标为基础的生产安全性指标体系,发现我国采矿业生产安全性水平在1991-2008年间提高了17倍多.并运用协整理论和动态建模方法建立了我国采矿业经济增长模型.结果表明,资本和劳动仍然是影响我国采矿业经济增长的主要因素,生产安全性指数在短期内拉动了采矿业GDP的增长,其长期拉动弹性系数为8.8%.

  1. Tools for organisational risk evaluation for occupational health stressors (OREOHS) for the small-scale mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2009-07-01

    Full Text Available Some of the main reasons for occupational health and safety deficiencies in small-scale mining are unawareness of risks of chronic occupational diseases and inadequately implemented education and training. The key needs of the sector is to provide...

  2. Mining lore : Bankhead, mining for coal

    Energy Technology Data Exchange (ETDEWEB)

    Nichiporuk, A.

    2007-09-15

    Bankhead, Alberta was one of the first communities to be established because of mining. It was founded in 1903 by the Canadian Pacific Railway (CPR) on Cascade Mountain in the Bow River Valley of Banff National Park. In 1904, Mine No. 80 was opened by the Pacific Coal Company to fuel CPR's steam engines. In order to avoid flooding the mine, the decision was made to mine up the steep seams instead of down. The mine entered full production in 1905. This article described the working conditions and pay scale for the mine workers, noting that there was not much in terms of safety equipment. There were many accidents and 15 men lost their lives at the mine. During the mine's 20-year operation, miners went on strike 6 times. The last strike marked the closure of the mine in June 1922 and the end of industry in national parks. CPR was ordered to clear out and move the mining equipment as well as the houses, buildings and essentially the entire town. During its peak production, Mine No. 80 produced about a half million tons of coal. 1 ref., 1 fig.

  3. Impact of industrial and mine drainage wastes on the heavy metal distribution in the drainage basin and estuary of the Sado River (Portugal).

    Science.gov (United States)

    Quevauviller, P; Lavigne, R; Cortez, L

    1989-01-01

    This paper presents results from a survey of the heavy metal distribution in sediments in the drainage basin and estuary of the Sado River (Portugal). In the drainage basin, heavy metals originate mostly from pyrite outcrop erosion and mining activities (Cd, Zn, Cu and locally Hg, Pg), and also from crust erosion (Sn, Ni, Ti, Zr). These sources are not correlated with the particulate organic carbon (POC) and so the metals are thought to be in inorganic forms in this area. Anthropogenic heavy metal sources (urban and industrial) are found in the lower estuary (Sn, Cd, Hg, Zn, Pb and Cu) along with high POC concentrations. In this zone, these metals are thought to be strongly adsorbed onto organic particles. Furthermore, organo-metallic species are likely to be present, as demonstrated in the case of Sn, since methyl- and butyl-tin species were detected in sediments from this area. This suggests the need for the detection of organo-metallic species to understand the heavy metal geochemical cycles. No long-term changes in metal concentrations are found in sediment cores, except in the middle estuary (Zn, Cu) due to the development of mining activities on an industrial scale in the 1860s.

  4. Non-Metallic Inclusions and Hot-Working Behaviour of Advanced High-Strength Medium-Mn Steels

    Directory of Open Access Journals (Sweden)

    Grajcar A.

    2016-06-01

    Full Text Available The work addresses the production of medium-Mn steels with an increased Al content. The special attention is focused on the identification of non-metallic inclusions and their modification using rare earth elements. The conditions of the thermomechanical treatment using the metallurgical Gleeble simulator and the semi-industrial hot rolling line were designed for steels containing 3 and 5% Mn. Hot-working conditions and controlled cooling strategies with the isothermal holding of steel at 400°C were selected. The effect of Mn content on the hot-working behaviour and microstructure of steel was addressed. The force-energetic parameters of hot rolling were determined. The identification of structural constituents was performed using light microscopy and scanning electron microscopy methods. The addition of rare earth elements led to the total modification of non-metallic inclusions, i.e., they replaced Mn and Al forming complex oxysulphides. The Mn content in a range between 3 and 5% does not affect the inclusion type and the hot-working behaviour. In contrast, it was found that Mn has a significant effect on a microstructure.

  5. The Effect of Different Non-Metallic Inclusions on the Machinability of Steel

    OpenAIRE

    Niclas Ånmark; Andrey Karasev; Pär Göran Jönsson

    2015-01-01

    Considerable research has been conducted over recent decades on the role of non-metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, ...

  6. Analysis and Suggestions for the Development of Green Mining Industry in China%我国绿色矿业发展现状分析及对策建议

    Institute of Scientific and Technical Information of China (English)

    相洪波

    2016-01-01

    In this paper, we analyze the current situation and problems of the development of green mining industry in China, and found that: there’s a lack of overall planning; the supporting policies for the development of green mining industry are not perfect; also there’s the lack of special funds; mostly are small and medium sized mines, and operating in an extensive way; yet the development of green mining industry don’t show good economic impact on enterprises; there is a high cost of government regulation. We also promote some suggestions for the development of green mining industry in China: ifrstly, to strengthen the overall plan of green mining industry development; secondly, supporting the implementation of policies, including increased funding on green mining development and the implementation of preferential tax and land policies; thirdly, to convert the development model of green mining industry, and change the business model correspondingly; fourthly, to enhance scientiifc and technological innovation, and optimize the mining industry structure; iffthly, to play a main role of the enterprise in market economy; sixthly, to strengthen the coordination and supporting role of non-proift social organizations in the development.%我国绿色矿业发展现状及问题:缺乏总体规划,发展绿色矿业的配套政策尚未完善,缺少专项资金,中小型矿山居多,且经营粗放,发展绿色矿业尚未对矿山企业经济利好,政府监管成本过高。我国绿色矿业发展的对策建议:(1)加强绿色矿业发展总体规划;(2)落实配套政策,包括加大绿色矿业发展的资金扶持力度,落实缴税优惠和用地优惠政策;(3)转变矿业发展模式,改变矿业经营模式;(4)提升科技创新,优化矿业产业结构;(5)发挥企业市场主体作用;(6)加强非盈利性社会团体组织协调支撑作用。

  7. Quantifying Forest and Coastal Disturbance from Industrial Mining Using Satellite Time Series Analysis Under Very Cloudy Conditions

    Science.gov (United States)

    Alonzo, M.; Van Den Hoek, J.; Ahmed, N.

    2015-12-01

    The open-pit Grasberg mine, located in the highlands of Western Papua, Indonesia, and operated by PT Freeport Indonesia (PT-FI), is among the world's largest in terms of copper and gold production. Over the last 27 years, PT-FI has used the Ajkwa River to transport an estimated 1.3 billion tons of tailings from the mine into the so-called Ajkwa Deposition Area (ADA). The ADA is the product of aggradation and lateral expansion of the Ajkwa River into the surrounding lowland rainforest and mangroves, which include species important to the livelihoods of indigenous Papuans. Mine tailings that do not settle in the ADA disperse into the Arafura Sea where they increase levels of suspended particulate matter (SPM) and associated concentrations of dissolved copper. Despite the mine's large-scale operations, ecological impact of mine tailings deposition on the forest and estuarial ecosystems have received minimal formal study. While ground-based inquiries are nearly impossible due to access restrictions, assessment via satellite remote sensing is promising but hindered by extreme cloud cover. In this study, we characterize ridgeline-to-coast environmental impacts along the Ajkwa River, from the Grasberg mine to the Arafura Sea between 1987 and 2014. We use "all available" Landsat TM and ETM+ images collected over this time period to both track pixel-level vegetation disturbance and monitor changes in coastal SPM levels. Existing temporal segmentation algorithms are unable to assess both acute and protracted trajectories of vegetation change due to pervasive cloud cover. In response, we employ robust, piecewise linear regression on noisy vegetation index (NDVI) data in a manner that is relatively insensitive to atmospheric contamination. Using this disturbance detection technique we constructed land cover histories for every pixel, based on 199 image dates, to differentiate processes of vegetation decline, disturbance, and regrowth. Using annual reports from PT-FI, we show

  8. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  9. Modification of Non-Metallic Inclusions by Rare-Earth Elements in Microalloyed Steels

    Directory of Open Access Journals (Sweden)

    M. Opiela

    2012-04-01

    Full Text Available The modification of the chemical composition of non-metallic inclusions by rare-earth elements in the new-developed microalloyed steels was discussed in the paper. The investigated steels are assigned to production of forged elements by thermo- mechanical treatment. The steels were melted in a vaccum induction furnace and modification of non-metallic inclusions was carried out by the michmetal in the amount of 2.0 g per 1 kg of steel. It was found that using material charge of high purity and a realization of metallurgical process in vacuous conditions result in a low concentration of sulfur (0.004%, phosphorus (from 0.006 to 0.008% and oxygen (6 ppm. The high metallurgical purity is confirmed by a small fraction of non-metallic inclusions averaging 0.075%. A large majority of non-metallic inclusions are fine, globular oxide-sulfide or sulfide particles with a mean size 17m2. The chemical composition and morphology of non-metallic inclusions was modified by Ce, La and Nd, what results a small deformability of non- metallic inclusions during hot-working.

  10. International mining forum 2004, new technologies in underground mining, safety in mines proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Jerzy Kicki; Eugeniusz Sobczyk (eds.)

    2004-01-15

    The book comprises technical papers that were presented at the International Mining Forum 2004. This event aims to bring together scientists and engineers in mining, rock mechanics, and computer engineering, with a view to explore and discuss international developments in the field. Topics discussed in this book are: trends in the mining industry; new solutions and tendencies in underground mines; rock engineering problems in underground mines; utilization and exploitation of methane; prevention measures for the control of rock bursts in Polish mines; and current problems in Ukrainian coal mines.

  11. Mining review

    Science.gov (United States)

    McCartan, L.; Morse, D.E.; Plunkert, P.A.; Sibley, S.F.

    2004-01-01

    The average annual growth rate of real gross domestic product (GDP) from the third quarter of 2001 through the second quarter of 2003 in the United States was about 2.6 percent. GDP growth rates in the third and fourth quarters of 2003 were about 8 percent and 4 percent, respectively. The upward trends in many sectors of the U.S. economy in 2003, however, were shared by few of the mineral materials industries. Annual output declined in most nonfuel mining and mineral processing industries, although there was an upward turn toward yearend as prices began to increase.

  12. 我国矿业权评估行业发展存在的问题及建议%Problems and suggestions in the development of mining rights evaluation industry in China

    Institute of Scientific and Technical Information of China (English)

    孟刚; 赵亚利; 吴韫婧; 卜小平; 王升辉

    2014-01-01

    This paper was based on the summary of mining rights evaluation system construction in China ,analysis of the current main problems in the development of mining rights evaluation industry in our country .In view of these problems ,and based on the progress of the reform and development needs of the mining rights evaluation industry ,put forward to strengthen mining right appraisal theory research , establishing “the price of mining rights” connotation ,improve the ability of the supervision and administration of mining rights assessment ,strengthening industry self-discipline management ,improve the appraisal institutions access conditions and internal control ability ,strengthening the construction of mining right evaluation practice team ,modify ,improve the mining rights assessment criteria such as suggestions .%本文在总结我国矿业权评估制度建设历程的基础上,分析了当前我国矿业权评估行业发展存在的主要问题。针对这些问题,并根据改革的进度和矿业权评估行业发展的需要,提出了加强矿业权评估理论研究,重新界定“矿业权价款”内涵,加强行业自律管理,提高矿业权评估监督管理水平,提高评估机构准入条件和内部管控能力,加强矿业权评估执业队伍建设,修改、完善矿业权评估准则等建议。

  13. Greenhouse Gases and Energy Intensity of Granite Rock Mining Operations in Thailand: A Case of Industrial Rock-Construction

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2016-12-01

    Full Text Available This paper is aimed to systematically assess greenhouse gases (GHGs and energy intensity of the granite rock mining operations in Thailand and also identify a range of feasible options to minimize their GHG emissions. Mining factories A, B and C, located in the Eastern region of Thailand, were selected as research case studies. The results indicated that the 3-year average of GHGs emissions from factories A to C was 3387 718 kgCO2e per year with approximately 2.92 kgCO2e per ton of granite rock produced over 2012 to 2014. Of this, the carbon intensity of grid-electricity consumption for the crushed rock production was 1.84 kgCO2/kWh. Diesel fuel combustion for transport activities in the mining factories was the greatest contributor to GHGs emissions (68 % compared to the purchased electricity and explosion process, with 31 % and 1 %, respectively. In-Pit Crushing and Conveying (IPCC installation, haul truck payload optimization and management, and reduction in tire rolling resistance have shown potential to reduce carbon emissions accounted for 20 % to 70 %.

  14. Greenhouse Gases and Energy Intensity of Granite Rock Mining Operations in Thailand: A Case of Industrial Rock-Construction

    Science.gov (United States)

    Kittipongvises, Suthirat; Chavalparit, Orathai; Sutthirat, Chakkaphan

    2016-12-01

    This paper is aimed to systematically assess greenhouse gases (GHGs) and energy intensity of the granite rock mining operations in Thailand and also identify a range of feasible options to minimize their GHG emissions. Mining factories A, B and C, located in the Eastern region of Thailand, were selected as research case studies. The results indicated that the 3-year average of GHGs emissions from factories A to C was 3387 718 kgCO2e per year with approximately 2.92 kgCO2e per ton of granite rock produced over 2012 to 2014. Of this, the carbon intensity of grid-electricity consumption for the crushed rock production was 1.84 kgCO2/kWh. Diesel fuel combustion for transport activities in the mining factories was the greatest contributor to GHGs emissions (68 %) compared to the purchased electricity and explosion process, with 31 % and 1 %, respectively. In-Pit Crushing and Conveying (IPCC) installation, haul truck payload optimization and management, and reduction in tire rolling resistance have shown potential to reduce carbon emissions accounted for 20 % to 70 %.

  15. Industrialization

    African Journals Online (AJOL)

    Lucy

    Second World era international system (1945-1990) may not have done any good to ... wedge between the capitalist and socialist blocs, not only blurred Third World .... Politics and the Stages of Economic Growth, Cambridge: Cambridge ... complex industries producing mainly for export, but also producing for local.

  16. Oberbergamt fuer das Saarland und das Land Rheinland-Pfalz, Bergamt Saarbruecken/Bergamt Rheinland-Pfalz. Annual report 1999. Economic and technical aspects, industrial safety and environmental protection, statistics, activities of the mining authorities; Oberbergamt fuer das Saarland und das Land Rheinland-Pfalz, Bergamt Saarbruecken/Bergamt Rheinland-Pfalz. Jahresbericht 1999.. Bergwirtschaft, Bergtechnik, Arbeitsschutz, Umweltschutz, Statistiken, Taetigkeiten der Bergbehoerden

    Energy Technology Data Exchange (ETDEWEB)

    Boettcher, R.; Hugo, K.H.; Kuhn, M.; Strauch, T. (comps.)

    1999-07-01

    The developments in Saarland and Rhineland-Palatinate mining are presented. Structure and responsibilities of the regional mines inspectorate are described, and their activities in the following fields are reported: industrial safety, health, mining and safety, mining and environmental protection. (orig.) [German] Nach Darstellung der bergwirtschaftlichen Entwicklung im Saarland und im Land Rheinland-Pfalz wird ueber den Aufbau und die Zustaendigkeit der Bergbehoerden sowie ueber deren Taetigkeiten auf folgenden Gebieten berichtet: Arbeits- und Gesundheitsschutz, Bergtechnik und Sicherheit, Bergbau und Umwelt. (orig.)

  17. Non-metal doped TiO2 nanotube arrays for high efficiency photocatalytic decomposition of organic species in water

    Science.gov (United States)

    Szkoda, Mariusz; Siuzdak, Katarzyna; Lisowska-Oleksiak, Anna

    2016-10-01

    Titanium dioxide is a well-known photoactive semiconductor with a variety of possible applications. The procedure of pollutant degradation is mainly performed using TiO2 powder suspension. It can also be exploited an immobilized catalyst on a solid support. Morphology and chemical doping have a great influence on TiO2 activity under illumination. Here we compare photoactivity of titania nanotube arrays doped with non-metal atoms: nitrogen, iodine and boron applied for photodegradation of organic dye - methylene blue and terephtalic acid. The doped samples act as a much better photocatalyst in the degradation process of methylene blue and lead to the formation of much higher amount of hydroxyl radicals (•OH) than undoped TiO2 nanotube arrays. The use of a catalyst active under solar light illumination in the form of thin films on a stable substrate can be scaled up for an industrial application.

  18. Noise and dust emissions from mining activities : a software for a first approach to the measurement management and selection of suitable reduction techniques

    Energy Technology Data Exchange (ETDEWEB)

    Cigna, C.; Lovera, E.; Patrucco, M. [Politecnico di Torino, Turin (Italy)

    2005-07-01

    Mining activities are often a matter of concern to local communities due to the potential impacts on the environment and landscape. As such, an effective balance is needed between socio-economic development and environmental protection. Mining activities in populated areas must be carefully planned and managed in order to avoid annoying local populations and to minimize health risks. This study was based on the criteria of the European Communities Commission to promote resource extraction and production methods that encourage eco-efficiency by developing best practice programs. In particular, this study defined and evaluated measurement, analysis and control criteria for the emission of chemical and physical pollutants from non-metal mining industries with particular reference to the reduction of noise and airborne particulates to the surrounding environment. The main focus of the study included on-site measuring campaigns in Italy's Lombardia mining region to collect data on mining techniques and technologies as well as pollutant emissions and propagation. The objective was to test the applicability of a newly proposed simplified monitoring systems and to evaluate the effective results of adopted pollution reduction strategies. A software-based database was also developed to manage detailed information on mining activities and to store the measured emissions data for future evaluation. 3 refs., 7 figs.

  19. A longitudinal study of the indicators and factors for successful six sigma deployment in the South African mining industry

    Directory of Open Access Journals (Sweden)

    Keeley, A. L.

    2013-05-01

    Full Text Available The Six Sigma deployment methodology is known for its results in operational excellence associated with improved business practices. Organisations worldwide have shown significantly reduced costs and increased profits when successfully deploying Six Sigma. This paper reports a longitudinal study of a set of indicators and success factors for Six Sigma deployment, using Lonmin PLC, a mining company in South Africa, as a case. The results suggest a shift of indicators from heartfelt personal involvement in 2006 to a mechanistic performance-based culture in 2010. Practical recommendations are made regarding the nine success factor components to be included during Six Sigma deployment

  20. A Fully Non-metallic Gas Turbine Engine Enabled by Additive Manufacturing

    Science.gov (United States)

    Grady, Joseph E.

    2014-01-01

    The Non-Metallic Gas Turbine Engine project, funded by NASA Aeronautics Research Institute (NARI), represents the first comprehensive evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. This will be achieved by assessing the feasibility of using additive manufacturing technologies for fabricating polymer matrix composite (PMC) and ceramic matrix composite (CMC) gas turbine engine components. The benefits of the proposed effort include: 50 weight reduction compared to metallic parts, reduced manufacturing costs due to less machining and no tooling requirements, reduced part count due to net shape single component fabrication, and rapid design change and production iterations. Two high payoff metallic components have been identified for replacement with PMCs and will be fabricated using fused deposition modeling (FDM) with high temperature capable polymer filaments. The first component is an acoustic panel treatment with a honeycomb structure with an integrated back sheet and perforated front sheet. The second component is a compressor inlet guide vane. The CMC effort, which is starting at a lower technology readiness level, will use a binder jet process to fabricate silicon carbide test coupons and demonstration articles. The polymer and ceramic additive manufacturing efforts will advance from monolithic materials toward silicon carbide and carbon fiber reinforced composites for improved properties. Microstructural analysis and mechanical testing will be conducted on the PMC and CMC materials. System studies will assess the benefits of fully nonmetallic gas turbine engine in terms of fuel burn, emissions, reduction of part count, and cost. The proposed effort will be focused on a small 7000 lbf gas turbine engine. However, the concepts are equally applicable to large gas turbine engines. The proposed effort includes a multidisciplinary, multiorganization NASA - industry team that includes experts in

  1. Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): a review.

    Science.gov (United States)

    Wang, Ruixue; Xu, Zhenming

    2014-08-01

    The world's waste electrical and electronic equipment (WEEE) consumption has increased incredibly in recent decades, which have drawn much attention from the public. However, the major economic driving force for recycling of WEEE is the value of the metallic fractions (MFs). The non-metallic fractions (NMFs), which take up a large proportion of E-wastes, were treated by incineration or landfill in the past. NMFs from WEEE contain heavy metals, brominated flame retardant (BFRs) and other toxic and hazardous substances. Combustion as well as landfill may cause serious environmental problems. Therefore, research on resource reutilization and safe disposal of the NMFs from WEEE has a great significance from the viewpoint of environmental protection. Among the enormous variety of NMFs from WEEE, some of them are quite easy to recycle while others are difficult, such as plastics, glass and NMFs from waste printed circuit boards (WPCBs). In this paper, we mainly focus on the intractable NMFs from WEEE. Methods and technologies of recycling the two types of NMFs from WEEE, plastics, glass are reviewed in this paper. For WEEE plastics, the pyrolysis technology has the lowest energy consumption and the pyrolysis oil could be obtained, but the containing of BFRs makes the pyrolysis recycling process problematic. Supercritical fluids (SCF) and gasification technology have a potentially smaller environmental impact than pyrolysis process, but the energy consumption is higher. With regard to WEEE glass, lead removing is requisite before the reutilization of the cathode ray tube (CRT) funnel glass, and the recycling of liquid crystal display (LCD) glass is economically viable for the containing of precious metals (indium and tin). However, the environmental assessment of the recycling process is essential and important before the industrialized production stage. For example, noise and dust should be evaluated during the glass cutting process. This study could contribute

  2. A Summary for Arsenic Analysis Method in Mining Industry%矿业中砷的分析方法概述

    Institute of Scientific and Technical Information of China (English)

    陈珍娥; 张海

    2014-01-01

    Arsenic existed in the nature widely as a odourless , tasteless and poisonous elements , which not only polluted the environment and water resources , but also endangered human health if arsenic was released in mining industry.So it was necessary to test the arsenic content of materials and waste water.The analysis methods of arsenic in mining industry were summarized , including volumetric method , colorimetric method , atomic absorption spectrometry AFS, electrochemical method , X-ray fluorescence method , inductively coupled plasma mass spectrometry , etc.Some features of these analysis methods were discussed.The combined techniques in separation and analysis of arsenic speciation were prospected.%砷作为一种无臭无味的剧毒元素,在自然界中广泛存在。在矿业中,砷的释放,不仅污染环境及水资源,而且危害人类健康,因此必须对原料及废水中砷含量进行检测。综述了矿业中砷的主要分析测试技术,主要是容量法、比色法、原子吸收光谱法、原子荧光法、电化学方法、 X-射线荧光法、电感耦合等离子体质谱法等,论述了这些分析方法的一些特点,展望了联用技术在矿业砷测定中的应用前景。

  3. Water pollution in gold mining industry: a case study in Roşia Montană district, Romania

    Science.gov (United States)

    Florea, R. M.; Stoica, A. I.; Baiulescu, G. E.; Capotă, P.

    2005-10-01

    The preliminary study of streams and rivers from the Roşia Montană area revealed that the concntration of heavy metals— Cd, Mn, Cu, Pb, and Zn—are above accepted limits. The gold extraction method is based on flotation. The most important pollution sources are mine tailings. The determinations were performed for samples collected in: April 2004, July 2004, September 2004, November 2004, February 2005 and May 2005. The highest concentrations were found for cadmium in September 2004: 0.17 mg/L; for copper in September 2004: 1.38 mg/L; for manganese in July 2004: 239.4 mg/L; for lead in May 2005: 0.54 mg/L; and for zinc in September 2004: 35.37 mg/L;. This study involved three small rivers (streams) that flow into the Mureş River and finally into the Danube River, having a great impact on human health and environmental stability in the area. In May 2005, a sample of drinking water from the mining district was also collected.

  4. Abatement of mercury pollution in the small-scale gold mining industry: restructuring the policy and research agendas.

    Science.gov (United States)

    Hilson, Gavin

    2006-06-01

    This paper critiques contemporary research and policy approaches taken toward the analysis and abatement of mercury pollution in the small-scale gold mining sector. Unmonitored releases of mercury from gold amalgamation have caused considerable environmental contamination and human health complications in rural reaches of sub-Saharan Africa, Latin America and Asia. Whilst these problems have caught the attention of the scientific community over the past 15-20 years, the research that has since been undertaken has failed to identify appropriate mitigation measures, and has done little to advance understanding of why contamination persists. Moreover, the strategies used to educate operators about the impacts of acute mercury exposure, and the technologies implemented to prevent further pollution, have been marginally effective at best. The mercury pollution problem will not be resolved until governments and donor agencies commit to carrying out research aimed at improving understanding of the dynamics of small scale gold mining communities. Acquisition of this knowledge is the key to designing and implementing appropriate support and abatement measures.

  5. Synthesis and Catalytic Applications of Non-Metal Doped Mesoporous Titania

    Directory of Open Access Journals (Sweden)

    Syed Z. Islam

    2017-03-01

    Full Text Available Mesoporous titania (mp-TiO2 has drawn tremendous attention for a diverse set of applications due to its high surface area, interfacial structure, and tunable combination of pore size, pore orientation, wall thickness, and pore connectivity. Its pore structure facilitates rapid diffusion of reactants and charge carriers to the photocatalytically active interface of TiO2. However, because the large band gap of TiO2 limits its ability to utilize visible light, non-metal doping has been extensively studied to tune the energy levels of TiO2. While first-principles calculations support the efficacy of this approach, it is challenging to efficiently introduce active non-metal dopants into the lattice of TiO2. This review surveys recent advances in the preparation of mp-TiO2 and their doping with non-metal atoms. Different doping strategies and dopant sources are discussed. Further, co-doping with combinations of non-metal dopants are discussed as strategies to reduce the band gap, improve photogenerated charge separation, and enhance visible light absorption. The improvements resulting from each doping strategy are discussed in light of potential changes in mesoporous architecture, dopant composition and chemical state, extent of band gap reduction, and improvement in photocatalytic activities. Finally, potential applications of non-metal-doped mp-TiO2 are explored in water splitting, CO2 reduction, and environmental remediation with visible light.

  6. State Mines Inspectorate of Saarland and Rheinland-Pfalz, Mines Inspectorate Saarbruecken / Mines Inspectorate Rheinland-Pfalz. Annual report 2001. Economic and technical aspects, industrial safety and environmental protection, statistics, activities of the mining authorities; Oberbergamt fuer das Saarland und das Land Rheinland-Pfalz, Bergamt Saarbruecken / Bergamt Rheinland-Pfalz. Jahresbericht 2001. Bergwirtschaft, Bergtechnik, Arbeitsschutz, Umweltschutz, Statistiken, Taetigkeiten der Bergbehoerden

    Energy Technology Data Exchange (ETDEWEB)

    Boettcher, R.; Hugo, K.H.; Kuhn, M.; Strauch, T. (comps.)

    2002-07-01

    The annual report of the Saarland and Rheinland-Pfalz State Mines Inspectorate and the Mines Inspectorates of the two states provide an insight into the many activities of mines inspectorates and of the current trends in mining engineering. The importance of mining and regional raw materials management is stressed. [German] Der vorliegende Jahresbericht des Oberbergamtes fuer das Saarland und das Land Rheinland-Pfalz sowie der Bergaemter in beiden Bundeslaendern gibt einen Einblick in das vielfaeltige Arbeitsgebiet der Bergbehoerden. Gleichzeitig vermittelt er einen Ueberblick ueber die bergtechnische Entwicklung und unterstreicht die volkswirtschaftliche Bedeutung des Bergbaus und der standortgebundenen Rohstoffwirtschaft.

  7. Technological Change and Its Labor Impact in Five Energy Industries. Coal Mining/Oil and Gas Extraction/Petroleum Refining/Petroleum Pipeline Transportation/Electric and Gas Utilities.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    This bulletin appraises major technological changes emerging in five American industries (coal mining, oil and gas extraction, petroleum refining, petroleum pipeline transportation, and electric and gas utilities) and discusses the impact of these changes on productivity and occupations over the next five to ten years. Its separate reports on each…

  8. [Effects of Three Industrial Organic Wastes as Amendments on Plant Growth and the Biochemical Properties of a Pb/Zn Mine Tailings].

    Science.gov (United States)

    Peng, Xi-zhu; Yang, Sheng-xiang; Li, Feng-mei; Cao, Jian-bing; Peng, Qing-jing

    2016-01-15

    A field trial was conducted in an abandoned Pb/Zn mine tailings to evaluate the effectiveness of three industrial wastes [sweet sorghum vinasse (SSV), medicinal herb residues (MHR) and spent mushroom compost (SMC)] as organic amendments on plant growth, soil nutrients and enzyme activities, and heavy metal concentrations in plant tissues and the mine tailings. (1) The main findings were as follows: (1) The mean concentrations of diethylene-triamine-pentaacetic acid (DTPA)-extractable Cd, Cu, Pb and Zn in SSV, MHR and SMC treatments decreased by 24.2%-27.3%, 45.7%-48.3%, 18.0%-20.9% and 10.1%-14.2% as compared to the control tailings. When compared to the control tailings, the mean values of organic matter, ammonium-N and available P in SSV, MHR and SMC treatments increased by 2.27-2.32, 12.4-12.8 and 4.04-4.74 times, respectively. Similarly, the addition of SSV, MHR and SMC significantly enhanced soil enzyme activities (dehydrogenase, beta-glucosidase, urease and phosphatase), being 5.51-6.37, 1.72-1.96, 6.32-6.62 and 2.35-2.62 times higher than those in the control tailings. (2) The application of these wastes promoted seed germination and seedling growth. The vegetation cover reached 84%, 79% and 86% at SSV, MHR and SMC subplots. For Lolium perenne and Cynodon dactylon, the addition of SSV, MHR and SMC led to significant increases in the shoot biomass yields with 4.2-5.6 and 15.7-17.3 times greater than those in the tailings. Moreover, the addition of SSV, MHR and SMC significantly reduced the concentrations of Cd, Cu, Pb and Zn in the shoots of L. perenne and C. dactylon in comparison with the control tailings. (3) Pearson's correlation coefficients showed that the vegetation cover and biomass were positively correlated with soil nutrient elements and enzyme activities. Significant negative correlations were observed between DTPA-extractable metal concentrations and vegetation cover and biomass. The metal concentrations in plants were positively correlated with

  9. THE GOAL AND THE GOLD MINE: Constraints Management and the Dutch Herring Fishing Industry, 1400-1700

    Directory of Open Access Journals (Sweden)

    Michael Scott Martin

    2009-01-01

    Full Text Available In many ways, the Netherlands set the pace for European economic growth in the fifteenth through the eighteenth centuries. The Dutch herring fishing industry was critical to this modern economic progress. A comparative study of this enterprise to the lean manufacturing tool of constraints management provides insight into how the Dutch dominated this lucrative industry. Improvements by Dutch fishing interests in technology, practice, procedures and quality control were consistent with the constraints management model. English and Scottish competitors failed to identify these constraints and thus, failed to challenge Dutch operators. The Dutch fishing industry practiced and understood constraints management and used it to monopolize the export herring market for three centuries.

  10. Fatigue Strength Prediction of Drilling Materials Based on the Maximum Non-metallic Inclusion Size

    Science.gov (United States)

    Zeng, Dezhi; Tian, Gang; Liu, Fei; Shi, Taihe; Zhang, Zhi; Hu, Junying; Liu, Wanying; Ouyang, Zhiying

    2015-12-01

    In this paper, the statistics of the size distribution of non-metallic inclusions in five drilling materials were performed. Based on the maximum non-metallic inclusion size, the fatigue strength of the drilling material was predicted. The sizes of non-metallic inclusions in drilling materials were observed to follow the inclusion size distribution rule. Then the maximum inclusion size in the fatigue specimens was deduced. According to the prediction equation of the maximum inclusion size and fatigue strength proposed by Murakami, fatigue strength of drilling materials was obtained. Moreover, fatigue strength was also measured through rotating bending tests. The predicted fatigue strength was significantly lower than the measured one. Therefore, according to the comparison results, the coefficients in the prediction equation were revised. The revised equation allowed the satisfactory prediction results of fatigue strength of drilling materials at the fatigue life of 107 rotations and could be used in the fast prediction of fatigue strength of drilling materials.

  11. Modelling of non-metallic particles motion process in foundry alloys

    Directory of Open Access Journals (Sweden)

    P. L. Żak

    2015-04-01

    Full Text Available The behaviour of non-metallic particles in the selected composites was analysed, in the current study. The calculations of particles floating in liquids differing in viscosity were performed. Simulations based on the Stokes equation were made for spherical SiC particles and additionally the particle size influence on Reynolds number was analysed.The movement of the particles in the liquid metal matrix is strictly connected with the agglomerate formation problem.Some of collisions between non-metallic particles lead to a permanent connection between them. Creation of the two spherical particles and a metallic phase system generates the adhesion force. It was found that the adhesion force mainly depends on the surface tension of the liquid alloy and radius of non-metallic particles.

  12. Morphometric characterization in basins affected by the mining industry; Caracterizacion morfometrica en cuencas hidrologicas afectadas por la mineria

    Energy Technology Data Exchange (ETDEWEB)

    Moreno Bortons, J.; Alonso Sarria, F.; Romero Diaz, A.; Belmonte Serrato, F.

    2009-07-01

    The intensive exploitation in the mining district of Cartagena la Union during recent centuries has generated a huge amount of waste scattered throughout the Sierra Minera. These debris act a dangerous pollution agent in the drainage network because the generated runoff erodes and disperse these wastes that are highly contaminated by heavy metals. In this way, the drainage networks of the study area been characterized to assess the production of runoff in basins which are sterile deposits, using the method of the Geomorphologic Unit Hydrography (GUH). The peak flows that have been obtained, taking into account the erodibility of soils, are capable of carrying large amounts of pollutants into the two main outlet areas (Mar Menor and Mediterranean Sea), meaning an important source of pollution int two sites of high ecological value. (Author) 6 refs.

  13. Conflict between work and nonwork roles of employees in the mining industry: Prevalence and differences between demographic groups

    Directory of Open Access Journals (Sweden)

    Betsie Steyl

    2011-02-01

    Full Text Available Orientation: International researchers have increasingly recognised the interaction between work and nonwork roles as an interesting and important topic. Research purpose: The purpose of this study was to investigate the prevalence of different work–nonwork conflict subscales and differences between demographic groups in work– nonwork conflict.Motivation for the study: Several studies have shown that demographic groups differ in their experiences of the interaction between work and family life. This may also be true of conflict between work and nonwork roles. The prevalence of work–nonwork conflict and nonwork– work conflict is also very important for organisations that may find the results very valuable for developing organisational and individual interventions and performance management in organisations.Research design, approach and method: The researchers chose a random sample of mining employees (n = 245 from a platinum mine in Rustenburg. The researchers used self-developed items similar to items developed in the Work–nonwork Interference Scale of Koekemoer, Mostert and Rothmann (2010 to measure conflict between work and various nonwork roles. The researchers used descriptive statistics, paired-sample t-tests, multivariate analysis of variance and one-way analysis of variance to analyse the data.Main findings: Work–nonwork conflict was more prevalent than nonwork–work conflict. Work–family conflict was more prevalent than work–domestic conflict and work–religion/ spirituality conflict. The researchers found significant differences for marital status and language groups about work–nonwork conflict. Results showed that participants who spoke African languages experienced higher levels of private–work conflict.Practical/managerial implications: Organisations need to recognise the negative interference or conflict between work and nonwork roles for different demographic groups and address the prevalent work

  14. Mining Method

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Shik; Lee, Kyung Woon; Kim, Oak Hwan; Kim, Dae Kyung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1996-12-01

    The reducing coal market has been enforcing the coal industry to make exceptional rationalization and restructuring efforts since the end of the eighties. To the competition from crude oil and natural gas has been added the growing pressure from rising wages and rising production cost as the workings get deeper. To improve the competitive position of the coal mines against oil and gas through cost reduction, studies to improve mining system have been carried out. To find fields requiring improvements most, the technologies using in Tae Bak Colliery which was selected one of long running mines were investigated and analyzed. The mining method appeared the field needing improvements most to reduce the production cost. The present method, so-called inseam roadway caving method presently is using to extract the steep and thick seam. However, this method has several drawbacks. To solve the problems, two mining methods are suggested for a long term and short term method respectively. Inseam roadway caving method with long-hole blasting method is a variety of the present inseam roadway caving method modified by replacing timber sets with steel arch sets and the shovel loaders with chain conveyors. And long hole blasting is introduced to promote caving. And pillar caving method with chock supports method uses chock supports setting in the cross-cut from the hanging wall to the footwall. Two single chain conveyors are needed. One is installed in front of chock supports to clear coal from the cutting face. The other is installed behind the supports to transport caved coal from behind. This method is superior to the previous one in terms of safety from water-inrushes, production rate and productivity. The only drawback is that it needs more investment. (author). 14 tabs., 34 figs.

  15. The Effect of Different Non-Metallic Inclusions on the Machinability of Steels.

    Science.gov (United States)

    Ånmark, Niclas; Karasev, Andrey; Jönsson, Pär Göran

    2015-02-16

    Considerable research has been conducted over recent decades on the role of non‑metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, etc.) are discussed and summarized. Finally, some methods for modification of non-metallic inclusions in the liquid steel are considered to obtain a desired balance between mechanical properties and machinability of various steel grades.

  16. Modification of Non-Metallic Inclusions by Rare-Earth Elements in Microalloyed Steels

    OpenAIRE

    Opiela M.; Grajcar A.

    2012-01-01

    The modification of the chemical composition of non-metallic inclusions by rare-earth elements in the new-developed microalloyed steels was discussed in the paper. The investigated steels are assigned to production of forged elements by thermo- mechanical treatment. The steels were melted in a vaccum induction furnace and modification of non-metallic inclusions was carried out by the michmetal in the amount of 2.0 g per 1 kg of steel. It was found that using material charge of high purity and...

  17. The Effect of Different Non-Metallic Inclusions on the Machinability of Steels

    Directory of Open Access Journals (Sweden)

    Niclas Ånmark

    2015-02-01

    Full Text Available Considerable research has been conducted over recent decades on the role of non‑metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, etc. are discussed and summarized. Finally, some methods for modification of non-metallic inclusions in the liquid steel are considered to obtain a desired balance between mechanical properties and machinability of various steel grades.

  18. Unique nature of the coal mining industry-are the labor law rules determining when two employers should be treated as one different for the coal industry?

    Energy Technology Data Exchange (ETDEWEB)

    Roles, F.J. [Smith, Heenan, & Althen, Charleston, WV (United States)

    1995-11-01

    Modern United States labor law dates from the 1935 enactment of the Wagner Act. Its definition of {open_quotes}employer{close_quotes} has remained the same over the the nearly sixty years of its application. The Courts and the Board have developed detailed criteria deciding when two or more employers should be considered one under that definition. Since the 1984 decision in B.F.I., those criteria have been uniformly accepted and applied. There is nothing unique about the coal industry warranting a change or a different application of the criteria.

  19. Profit of Mining Industry in the First Quarter Dropped by 61% on Y-o-Y Basis

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    According to data published by the National Bureau of Statistics,from January to March,nationwide industrial enterprises above designated size fulfilled total profit of 1254.32billion yuan,down by 2.7%on Y-o-Y basis,the decline margin narrowed by 1.5 percentage points than the period from January to

  20. LEVELS OF STATE REGULATION OF THE LEGAL STATUS OF THE DISPLACED PERSONS IN THE GOLD MINING INDUSTRY OF THE USSR (1930-1950

    Directory of Open Access Journals (Sweden)

    Kochegarova Elena Danilovna

    2013-04-01

    Full Text Available Repressive policy of the Soviet state remains one of the actual problems of Russian historical science. The peculiarities of the legal status of displaced persons, their contribution to the socio-economic development of certain regions, the use of labor by industry and government agencies deserve more attention. Purpose The purpose of this work is the analysis of public policy at different levels and reconstruction of the mechanism of development, adoption and implementation of government decisions in the employment of special group in the gold mining industry. Methodology The dialectical approach is a methodological basis of the research and was implemented through the principles of historicism, scientism, objectivity. Results General thrust of the state policy is determined by the directive of the central, regional and local authorities have particularized or duplicated relevant legal documents at higher levels. Dynamics of changes in the legal status of the displaced persons determined mutually exclusive trends: 1 the weakening or removal of restrictions, 2 toughening control. Priority in decisions belonged Party committees at all levels of management, while the real power had repressive authorities. The practical implementation of government decisions at the local level distorted and was adjusted based on personal or group interests. Practical implications The results can be used for further scientific development of the problem of forced migration.

  1. MINE WASTE TECHNOLOGY PROGRAM: A SUCCESS STORY

    Science.gov (United States)

    Mining Waste generated by active and inactive mining operations is a growing problem for the mining industry, local governments, and Native American communities because of its impact on human health and the environment. In the US, the reported volume of mine waste is immense: 2 b...

  2. Electrokinetic remediation of copper mine tailings

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, H. K.; Rojo, A.; Ottosen, L. M.

    2009-07-01

    The heavy metal contamination from mining industry has become a growing problem both in chile and worldwide. This contamination includes large areas with soil pollution, contaminated rivers and continuous generation of mining waste deposits. The solid waste that will be analysed is mine tailings, which are the residual products after the flotation process in conventional sulphide copper mining. (Author)

  3. Education Roadmap for Mining Professionals

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-12-01

    This document represents the roadmap for education in the U.S. mining industry. It was developed based on the results of an Education Roadmap Workshop sponsored by the National Mining Association in conjunction with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held February 23, 2002 in Phoenix, Arizona.

  4. Text Mining Applications and Theory

    CERN Document Server

    Berry, Michael W

    2010-01-01

    Text Mining: Applications and Theory presents the state-of-the-art algorithms for text mining from both the academic and industrial perspectives.  The contributors span several countries and scientific domains: universities, industrial corporations, and government laboratories, and demonstrate the use of techniques from machine learning, knowledge discovery, natural language processing and information retrieval to design computational models for automated text analysis and mining. This volume demonstrates how advancements in the fields of applied mathematics, computer science, machine learning

  5. Discussion on Lu Cun No.1 Coal Mine Industrial Site General Layout%浅谈芦村一号煤矿工业场地总平面布置

    Institute of Scientific and Technical Information of China (English)

    杜厦

    2014-01-01

    Industrial site general layout plays an important role in the existing coal mine planning, and the design of industrial site general layout influences the vertical design of site, the road design and the comprehensive design of pipeline network etc. This article presents Lu Cun No.1 Coal Mine Industrial site general layout.%工业场地总平面布置在现有煤矿总体规划中起着至关重要的作用,工业场地总平面设计影响着场地竖向设计、场内道路设计及管网综合设计等。本文研究了芦村一号煤矿浅谈总平面布置的设计。

  6. The Construction of Mining Enterprises' Resource Accounts System Under the Background of Networking Industry Competition%网络化产业竞争背景下矿业企业资源账户体系的构建

    Institute of Scientific and Technical Information of China (English)

    冯茜颖; 黄薪萌

    2012-01-01

    网络化产业竞争背景下,矿业企业的边界得以延伸,资源概念得以拓展,竞争优势的获取来源于对资源的整合力度.在对矿业企业资源进行识别和分类的基础上,构建矿业企业资源整合模型,并依据会计账户设置的思想,建立矿业企业资源账户体系,旨在引导矿业企业资源整合过程,提升矿业企业核心竞争力,促进矿业企业可持续发展.%In the context of networking industry competition, the boundary of mining enterprise can be extended; the concept of resource can be expanded, and the competitive advantage derive from the integration of resources. Based on the i-dentification and classification of the mining enterprises'resources, the resources integration model of mining enterprises is built, and according to the thought about accounts setting, the resources accounts system of mining enterprises is designed in order to guide the process of resources integration for mining enterprises, improve their core competitiveness, and promote the sustainable development of mining enterprises.

  7. Henan Plans to Shut Down Over 475 mines by 2015

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>Recently, the General Office of Henan Provin-cial Government printed and distributed "He-nan Province Metal and Non-metal Mine Recti-fication Shutdown Work Plan (2012-2015)" (The Plan). By carrying out rectification and

  8. Effect of Acid-Soluble Aluminum on the Evolution of Non-metallic Inclusions in Spring Steel

    Science.gov (United States)

    Wang, Yong; Tang, Haiyan; Wu, Tuo; Wu, Guanghui; Li, Jingshe

    2017-04-01

    The content of acidic soluble aluminum in molten steel ([Al]s) is of significance to the control of total oxygen (TO), the formation of non-metallic inclusions, and the improvement of the surface quality of billets. Industrial trials and thermodynamic calculations were performed to study the effects of [Al]s content on the TO and the evolution of non-metallic inclusions in 60Si2Mn-Cr spring steel that was deoxidized by Si-Mn ((low aluminum process (LAP)) and Si-Mn-Al (high aluminum process (HAP)). The results show that the [Al]s contents in billets are within 0.0060 to 0.0069 mass pct in the LAP and 0.016 to 0.055 mass pct in the HAP. The TO content at each station of the LAP is higher than that in the HAP; the inclusions of billets were mainly of the CaO-Al2O3-SiO2 type in the former, and of the CaO-Al2O3-MgO and CaS-Al2O3-MgO types in the latter. A tendency is found that the higher the [Al]s, the easier it is to deviate from the low melting point region of the inclusion distribution and the larger the size of the inclusions. The relationships between [Al]s and the melting point of the oxide inclusions and the Al2O3 content in the oxide inclusions are also discussed in terms of experiment and calculation.

  9. Regional soil geochemistry in the Ojailen Valley: a realm dominated by the industrial and mining city of Puertollano (South Central Spain)

    Science.gov (United States)

    López-Berdonces, Miguel; Fernandez-Calderón, Sergio; Higueras, Pablo; María Esbrí, Jose; Gonzalez-Corrochano, Beatríz; García-Noguero, Eva Mª; Martínez-Coronado, Alba; García-Noguero, Carolina

    2013-04-01

    Regional soil geochemistry in the Ojailén Valley: a realm dominated by the industrial and mining city of Puertollano (South Central Spain). Authors: Miguel A. López-Berdonces¹; Sergio Fernández Calderón¹; Pablo Higueras¹; José María Esbrí¹; Beatriz González-Corrochano¹; Eva Mª García-Noguero¹; Alba Martínez-Coronado¹; Carolina García Noguero¹ ¹Instituto de Geología Aplicada, Universidad de Castilla La Mancha, Almadén 13400 (Spain). Ojailén Valley is situated in South Central of Spain, an area where livestock, agriculture, mining and industry coexist. This work tries to assess the relationships between these activities and local environmental compartments: water, soils and heavy metal contents, and establish the most appropriate methodology of sample treatment and analytical techniques that can be employed on this kind of studies. For soil geochemistry, 152 samples were taken at two different depths, one at surface layer and another at 20 cm depth, and establish relationships between them and the possible sources. For this purpose, we determine soil parameters (pH, conductivity and organic matter) and total metal contents by Energy Dispersion of X Ray Fluorescence (EDXRF). Samples with higher nickel contents were analyzed with Inductive Coupled Plasma Spectroscopy (ICP-OES) after acid digestion. The study of surface waters includes 18 samples along the river and tributaries near mining and industrial areas. Water analysis was performed by ICP-OES. Soil samples shows pH between 6 and 8.5, highest located near on the east part of the valley, in the vicinity of petrochemical complex. Conductivity values show higher levels (1600 µS cm¯¹) in the vicinity of Puertollano and the industrial sites. Local reference value (LRV) for contaminated soils were determined according to the methodology proposed by Jimenez-Ballesta et al. (2010), using the equation: LRV=GM + 2SD, where LRV: Local Reference Value, GM: Geometric Mean, SD: Standard Deviation

  10. Know-how management ''Rock mechanics and support methods for the gate roads in the German coal mining industry''; Wissensmanagement ''Gebirgsmechanik und Ausbautechnik fuer Floezstrecken im deutschen Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Junker, M. [Deutsche Steinkohle AG, Herne (Germany). Servicebereich Technik und Logistik; Schmidt, R.

    2006-03-23

    The R+D-project for establishment of a database with the entire know-how of the last 30 years from the ''Rock mechanics and support methods for gate roads in the German coal mining industry'' has so far been carried out as planned. After adaptation to the project the selected computer system was introduced. A planning module with recorded operational cases and a structured literature database is thus available to the Competence Centre for Road Supports in the Mining Technology Department of the Technology and Logistics Service Division of DSK. (Orig.)

  11. Text-Mining and Gamification for the Qualification of Service Technicians in the Maintenance Industry of Offshore Wind Energy

    Directory of Open Access Journals (Sweden)

    Thies Beinke

    2017-04-01

    Full Text Available The competition of maintenance services in the offshore wind industry is continually increasing. The quality of the services acts as the distinguishing feature in the industry. Furthermore, there are public standards, which lead to the permanent necessity to offer further education and training programs for employees. To meet the requirements for further training in the specific field of application within the offshore wind industry, a gamified e-learning application has been developed and is introduced in this paper. It consists of a complete solution, which contains the automated analysis of service protocols to identify qualification needs, the involvement of service technicians in the generation of learning materials, the preparation, transmission as well as the further development of those materials in accordance with the principles of e-learning. Finally, the solution contains a gamified mobile application for qualification, which is designed to meet the individual learning needs of the service technicians. This concept paper follows a problem-centred approach. Based on the current state of technology and research, the problem and motivation are identified and the urgency is verified. Furthermore, a detailed specification of the solution and a first implementation approach is presented.

  12. Opportunities to integrate solar technologies into the Chilean lithium mining industry - reducing process related GHG emissions of a strategic storage resource

    Science.gov (United States)

    Telsnig, Thomas; Potz, Christian; Haas, Jannik; Eltrop, Ludger; Palma-Behnke, Rodrigo

    2017-06-01

    The arid northern regions of Chile are characterized by an intensive mineral mining industry and high solar irradiance levels. Besides Chile's main mining products, copper, molybdenum and iron, the production of lithium carbonate from lithium containing brines has become strategically important due to the rising demand for battery technologies worldwide. Its energy-intensive production may affect the ecological footprint of the product and the country's climate targets. Thus, the use of solar technologies for electricity and heat production might constitute an interesting option for CO2 mitigation. This study aims to quantify the impacts of the lithium carbonate production processes in Chile on climate change, and to identify site-specific integration options of solar energy technologies to reduce GHG life-cycle emissions. The considered solar integration options include a parabolic trough power plant with a molten salt storage, a solar tower power plant with molten salt receiver and molten salt storage, a one-axis tracking photovoltaic energy system for electricity, and two solar thermal power plants with Ruths storage (steam accumulator) for thermal heat production. CSP plants were identified as measures with the highest GHG mitigation potential reducing the CO2 emissions for the entire production chain and the lithium production between 16% and 33%. In a scenario that combines solar technologies for electricity and thermal energy generation, up to 59% of the CO2 emissions at the lithium production sites in Chile can be avoided. A comparison of the GHG abatement costs of the proposed solar integration options indicates that the photovoltaic system, the solar thermal plant with limited storage and the solar tower power plant are the most cost effective options.

  13. The Safety Journey: Using a Safety Maturity Model for Safety Planning and Assurance in the UK Coal Mining Industry

    Directory of Open Access Journals (Sweden)

    Patrick Foster

    2013-02-01

    Full Text Available A Safety Maturity Model was developed for use in UK coal mining operations in order to assess the level of compliance and effectiveness with a recently introduced standards based safety management system. The developed model allowed for a “self-assessment” of the maturity to be undertaken by teams from the individual sites. Assessments were undertaken at all sites (surface and underground and in some cases within each site (e.g., underground operations, surface coal preparation plant. Once the level of maturity was established, improvement plans were developed to improve the maturity of individual standards that were weaker than the average and/or improve the maturity as a whole. The model was likened to a journey as there was a strong focus on continual improvement and effectiveness of the standards, rather than pure compliance. The model has been found to be a practical and useful tool by sites as a means of identifying strengths and weaknesses within their systems, and as a means of assurance with the safety management system standards.

  14. 废弃电路板中非金属组分的回收利用%Recycling of non-metallic fractions from waste printed circuit boards

    Institute of Scientific and Technical Information of China (English)

    刘旸; 刘静欣; 江晓健; 郭学益

    2016-01-01

    废弃电路板是电子废弃物的重要组成部分。目前工业生产及工艺开发多针对极具经济回收价值的电路板金属组分。然而,占电路板质量分数70%的非金属组分却关注较少。文章分析了废弃电路板非金属组分的组成及其有害组分,其含有树脂及玻璃纤维等有价成分和溴、夹杂重金属等污染环境的物质,其回收利用对于资源循环利用及环境保护均有重要意义。非金属组分回收利用主要有物理处理和化学处理2种技术:物理处理技术主要将非金属组分用作结构材料填料、塑料改性剂和建筑材料改性剂;化学处理技术通过焚烧将非金属组分用作燃料和熔剂或通过热解回收或溶剂分解回收可将非金属组分转化为化工产品。这2种技术在非金属组分资源化利用上各有优势,都已有部分工业化应用。%Waste printed circuit boards (WPCBs) are important parts in the electronic waste. Nowadays, recov-ering metals from WPCBs are developed but non-metallic fractions which accounts for 70% of waste printed circuit boards have not been effectively utilized. The non-metallic fractions and hazards in waste printed cir-cuit boards were analyzed in this paper. The results show that resins and glass fiber in non-metallic fractions can be recycled and bromine and heavy metals could pollute environment. Recovering non-metallic fractions are important to recycling and environment, which can be divided into physical recycling technology and chemical recycling technology, with the formal using non-metallic fractions as the filler materials, plastic modifier or building material modifiers, and the latter using non-metallic fractions as the fuel and smelting flux through incineration or convert non-metallic fractions into chemical products through pyrolysis or solvent decomposition. Both technologies have their own advantages in resource utilization of non-metallic fractions, and partly

  15. Coal mining in the power industry of the Federal Republic of Germany in 1999; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-11-01

    After an introductory text divided into the sections energy and coal market, coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. (orig.) [German] Nach einem einfuehrenden Text, der in die Abschnitte Energie- und Kohlenmarkt, Steinkohlenbergbau und Braunkohlenbergbau gegliedert ist, wird ein umfangreiches Tabellenmaterial vorgelegt, das die wichtigsten Kennzahlen des deutschen Kohlenbergbaus enthaelt. (orig.)

  16. Coal mining in the power industry of the Federal Republic of Germany in 2000; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    After an introductory text divided into the sections energy and coal market, coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. [German] Nach einem einfuehrenden Text, der in die Abschnitte Energie- und Kohlenmarkt, Steinkohlenbergbau und Braunkohlenbergbau gegliedert ist, wird ein umfangreiches Tabellenmaterial vorgelegt, das die wichtigsten Kennzahlen des deutschen Kohlenbergbaus enthaelt.

  17. Coal mining in the power industry of the Federal Republic of Germany in 1998; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    After an introductory text divided into the sections energy and coal market, coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. (orig.) [German] Nach einem einfuehrenden Text, der in die Abschnitte Energie- und Kohlenmarkt, Steinkohlenbergbau und Braunkohlenbergbau gegliedert ist, wird ein umfangreiches Tabellenmaterial vorgelegt, das die wichtigsten Kennzahlen des deutschen Kohlenbergbaus enthaelt. (orig.)

  18. Coal mining in the power industry of the Federal Republic of Germany in 2015; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2015

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-11-15

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2015. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  19. Coal mining in the power industry of the Federal Republic of Germany in 2014; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2014

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-11-15

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2014. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  20. Coal mining in the power industry of the Federal Republic of Germany in 2010; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-11-15

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2010. Statistical data are presented for the power market and coal market, brown coal mining as well as the hard coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  1. Coal mining in the power industry of the Federal Republic of Germany in 2001; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    After an introductory text divided into the sections energy and coal market, coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. [German] Nach einem einfuehrenden Text, der in die Abschnitte Energie- und Kohlenmarkt, Steinkohlenbergbau und Braunkohlenbergbau gegliedert ist, wird ein umfangreiches Tabellenmaterial vorgelegt, das die wichtigsten Kennzahlen des deutschen Kohlenbergbaus enthaelt.

  2. The Measurement of Hardness and Elastic Modulus of non-Metallic Inclusions in Steely Welding Joints

    Directory of Open Access Journals (Sweden)

    Ignatova Anna

    2015-08-01

    Full Text Available Trunk pipelines work under a cyclic dynamical mechanical load because when oil or gas is pumped, the pressure constantly changes - pulsates. Therefore, the fatigue phenomenon is a common reason of accidents. The fatigue phenomenon more often happens in the zone of non-metallic inclusions concentration. To know how the characteristics of nonmetallic inclusions influence the probability of an accident the most modern research methods should be used. It is determined with the help of the modern research methods that the accident rate of welded joints of pipelines is mostly influenced by their morphological type, composition and size of nonmetallic inclusions, this effect is more important than the common level of pollution by non-metallic inclusions. The article presents the results of the investigations of welded joints, obtained after the use of different common welding materials. We used the methods, described in the state standards: scanning electronic microscopy, spectral microprobe analysis and nano-indentation. We found out that non-metallic inclusions act like stress concentrators because they shrink, forming a blank space between metal and nonmetallic inclusions; it strengthens the differential properties on this boundary. Nonmetallic inclusion is not fixed, it can move. The data that we have received mean that during welded joints’ contamination (with non-metallic inclusions monitoring process, more attention should be paid to the content of definite inclusions, but not to total contamination.

  3. Seguridad industrial y minera: Aspectos estratégicos para el control pasivo de ruido. // Industrial and mining security: estrategics aspects for the passive control of noise.

    Directory of Open Access Journals (Sweden)

    Luis Felipe Sexto

    2001-04-01

    Full Text Available El trabajo presenta una serie de aspectos medulares a tener en cuenta para atenuar el efecto de la contaminación sonora enambientes industriales. Propone un perfil de enfrentamiento que, en su conjunto, se ha dado en llamar Control Pasivo deRuido (CPR. Entre los elementos que se analizan están los descriptores de ruido necesarios, la determinación de lostiempos de exposición límites, el aislamiento de las vibraciones, el programa de control, la utilidad de las pantallas yencapsulamientos acústicos, , entre otros aspectos. Se exponen, con especial énfasis, los criterios para la selección efectivade los dispositivos para la protección auditiva. Además, se plantea un enfoque que vincula la estrategia de Control Pasivode Ruido como parte de una concepción más amplia que es considerada en la consecuente aplicación de una política demantenimiento eficaz. Tal relación constituye el punto de partida para asegurar la salud del personal, el buenfuncionamiento de los equipos, la seguridad operacional, y con ello, la disminución del alcance nefasto de la contaminaciónacústica en ambientes industriales.Palabras claves: Ruido, contaminación, mantenimiento, seguridad, salud, control pasivo._____________________________________________________________________AbstractThe work presents a series of important aspects to keep in mind in order to attenuate the effect of the sound contaminationin industrial environment. A confrontation profile is provided, which has been called Passive Control of Noise (CPR.Among the analyzed elements are: the determination of time exhibition limits, the vibration isolation, the utility of screensand acoustic capsule, the control program, and other aspects. With special emphasis are exposed the approaches for theeffective selection of the devices for auditive protection. An aproach is stated that links the strategy of Passive NoiseControl as part of a wider conception that is considered in the consequent application

  4. CSIR: Mining Technology annual review 1996/97

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    CSIR: Mining Technology works in close collaboration and strategic partnership with the mining industry, government institutions and employee organizations by acquiring, developing and transferring technologies to improve the safety and health of their employees, and to improve the profitability of the mining industry. The annual report describes achievements over the year in the areas of: rock engineering (including rockburst control, mine layout, stope and gully support, coal mining); environmental safety and health on topics such as occupational hygiene services, methane explosions, blasting techniques; and mining systems (orebody information, hydraulic transport mine mechanization, engineering design and automation, mine services). A list of Mining Technology`s 1996/97 publications is given.

  5. Worker exposure to silica dust in South African non-mining industries in Gauteng: An exploratory study

    CSIR Research Space (South Africa)

    Khoza, NN

    2012-06-01

    Full Text Available /m?, respectively. Of the occupations measured, 53% were exposed to silica dust at above the RSA-OEL. 18 The clay worker and dispatch clerk occupations were exposed to silica dust where mean, median and maximum levels exceeded the RSA-OEL of silica dust. Only 2... of silica dust exposure, as this is the one of the major industries reported in literature. 4.5 Ceramics/potteries Handling clay or sand that contains silica is the main source of worker exposure to respirable silica in the ceramics/pottery working...

  6. Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): A review

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ruixue; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

    2014-08-15

    Highlights: • NMFs from WEEE were treated by incineration or land filling in the past. • Environmental risks such as heavy metals and BFRs will be the major problems during the NMFs recycling processes. • Methods and technologies of recycling the two types of NMFs from WEEE, plastics, glasses are reviewed. • More environmental impact assessment should be carried out to evaluate the environmental risks of the recycling products. - Abstract: The world’s waste electrical and electronic equipment (WEEE) consumption has increased incredibly in recent decades, which have drawn much attention from the public. However, the major economic driving force for recycling of WEEE is the value of the metallic fractions (MFs). The non-metallic fractions (NMFs), which take up a large proportion of E-wastes, were treated by incineration or landfill in the past. NMFs from WEEE contain heavy metals, brominated flame retardant (BFRs) and other toxic and hazardous substances. Combustion as well as landfill may cause serious environmental problems. Therefore, research on resource reutilization and safe disposal of the NMFs from WEEE has a great significance from the viewpoint of environmental protection. Among the enormous variety of NMFs from WEEE, some of them are quite easy to recycle while others are difficult, such as plastics, glass and NMFs from waste printed circuit boards (WPCBs). In this paper, we mainly focus on the intractable NMFs from WEEE. Methods and technologies of recycling the two types of NMFs from WEEE, plastics, glass are reviewed in this paper. For WEEE plastics, the pyrolysis technology has the lowest energy consumption and the pyrolysis oil could be obtained, but the containing of BFRs makes the pyrolysis recycling process problematic. Supercritical fluids (SCF) and gasification technology have a potentially smaller environmental impact than pyrolysis process, but the energy consumption is higher. With regard to WEEE glass, lead removing is requisite

  7. An industrial district around a mining resource: the case of marble of Macael in Almería

    Directory of Open Access Journals (Sweden)

    José Á. Aznar-Sánchez

    2015-01-01

    Full Text Available Las canteras de mármol de Macael han sido explotadas desde la antigüedad, pero no es hasta mediados del siglo pasado cuando comienza a for - marse un complejo industrial que engloba a la extracción, la transformación y la comercialización. En los años ochenta del siglo pasado se llevaron a cabo varios planes de desarrollo local para modernizar e impulsar este sector convirtiéndolo en un referente internacional en piedras ornamentales. El sector ha sufrido una gran transformación en su configuración pasando de ser una aglomeración minera a un distrito industrial, lo que le ha dotado de un gran dinamismo y resiliencia. También ha cambiado su posición competitiva que ha pasado de estar basada en ventajas comparativas a ventajas competitivas. Y en su interior ha surgido una empresa no-dal (Cosentino que se ha convertido en una multinacional líder a nivel mundial.

  8. The relationship between various exposure metrics for elongate mineral particles (EMP) in the taconite mining and processing industry.

    Science.gov (United States)

    Hwang, Jooyeon; Ramachandran, Gurumurthy; Raynor, Peter C; Alexander, Bruce H; Mandel, Jeffrey H

    2014-01-01

    Different dimensions of elongate mineral particles (EMP) have been proposed as being relevant to respiratory health end-points such as mesothelioma and lung cancer. In this article, a methodology for converting personal EMP exposures measured using the National Institute for Occupational Safety and Health (NIOSH) 7400/7402 methods to exposures based on other size-based definitions has been proposed and illustrated. Area monitoring for EMP in the taconite mines in Minnesota's Mesabi Iron Range was conducted using a Micro Orifice Uniform Deposit Impactor (MOUDI) size-fractionating sampler. EMP on stages of the MOUDI were counted and sized according to each EMP definition using an indirect-transfer transmission electron microscopy (ISO Method 13794). EMP were identified using energy-dispersive x-ray and electron diffraction analysis. Conversion factors between the EMP counts based on different definitions were estimated using (1) a linear regression model across all locations and (2) a location-specific ratio of the count based on each EMP definition to the NIOSH 7400/7402 count. The highest fractions of EMP concentrations were found for EMP that were 1-3 μm in length and 0.2-0.5 μm in width. Therefore, the current standard NIOSH Method 7400, which only counts EMP >5 μm in length and ≥ 3 in aspect ratio, may underestimate amphibole EMP exposures. At the same time, there was a high degree of correlation between the exposures estimated according to the different size-based metrics. Therefore, the various dimensional definitions probably do not result in different dose-response relationships in epidemiological analyses. Given the high degree of correlation between the various metrics, a result consistent with prior research, a more reasonable metric might be the measurement of all EMP irrespective of size. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the

  9. WHAT INNOVATIVE APPROACHES CAN BE DEVELOPED FOR MINING SITES?

    Science.gov (United States)

    Mining is essential to maintain our way of life. However, based upon industry's reporting in the most recent Toxic Release Inventory (TRI), the primary sources of heavy metal releases to the environment are mining and mining related activities. The hard rock mining industry rel...

  10. 工矿企业内燃机车的维护与保养%Maintenance of Diesel locomotive in Industrial and Mining Enterprises

    Institute of Scientific and Technical Information of China (English)

    孙有民

    2011-01-01

    针对工矿企业内燃机车作业区环境恶劣,以及柴油机维护保养困难等问题,提出了改进措施.不仅延长柴油机的使用寿命,减少机车故障,降低成本,节约了机车的检修费用,缩短了机车的库停时间,也提高了机车的运用率,为运输保产提供保证.%For a poor environment of Locomotive operation area in the mining industry,and the problems and other issues of diesel engine maintenance,this paper proposes improvement measures, which is used not only to extend the life of diesel engines, to reduce locomotive failures and the locomotive maintenance costs and shorten the time of shut-down maintenance, but also improve locomotive utilization rate and ensure transport security.

  11. Experimental and numerical study of gas-to-particle conversion in an emission plume from mining and metallurgical industry based on airborne sounding in a polar atmosphere

    Science.gov (United States)

    Simonenkov, Denis V.; Raputa, Vladimir F.; Yaroslavtseva, Tatyana V.; Belan, Boris D.

    2016-11-01

    The results of an airborne survey of plumes from the Norilsk Mining and Metallurgical Plant by an Optik-É AN-30 aircraft laboratory on November 10, 2002 are discussed. Most pollutants are blown out of the city in the gas phase in the form of acidic oxides (mainly sulfur). Mapping of the substances is performed along the main trajectory of air mass transport at a distance of 20-140 km from the city. Horizontal flights were performed at 400, 600, 800, and 1200 m above sea level at equidistant traverses (from 3 to 6 at each height) normally to the main flow direction. Most pollution was concentrated above the 400-m level. An active gas-to-particle conversion was observed at a distance of 60-100 km from the emission source. In the plume areas distant from the source there was a sulfate anion increase from 4% to 51% in aerosol composition weight and a calcium decrease from 64% to 9%. Under the conditions of low humidity in the polar atmosphere in winter, SO2 is apparently removed from the air mainly due to dry heterogeneous condensation with calcium oxide as the main counteragent of industrial origin. The concentrations of these active pollutants in the plume are well approximated by a two-parameter transformation model.

  12. [Characteristics and Inputs of Cd Contamination in Paddy Soils in Typical Mining and Industrial Areas in Youxian County, Hunan Province].

    Science.gov (United States)

    Zhang, Min; Wang Mei-e; Chen, Wei-ping; Niu, Jun-jie

    2015-04-01

    In order to explore input pathways and pollution characteristics of Cd contamination in paddy soil in Youxian, Hunan Province, Cd contents in paddy soils, sediments of irrigation canals, typical mineral and industrial products such as coal, gangue and cement were analyzed. It was suggested that the average contents of Cd both in surface paddy soil and the corresponding natural soil were higher than the soil quality standard 0.3 mg x kg(-1). Cd contents in gangue and cement were similar as those in the corresponding natural soils. The atmosphere deposition of Cd was the highest in factory area. The profiles of Cd in 0-100 cm paddy soil and 0-40 cm in natural soils varied significantly from the upper to the lower layer. Cd contents in 0-40 cm layer in paddy soil were much higher than those in corresponding natural soils in mineral and mineral-factory areas. The potentiality for downward movement of Cd in soils in mineral area was the highest among the three studied areas. It suggested Cd contents in surface paddy soil were higher in upwind areas than those in downwind areas in mineral-factory and factory areas. It could be concluded that the main input pathways of Cd in mineral and mineral-factory. areas were from irrigation water, while contribution of atmosphere deposition in mineral-factory and factory areas was also very significant.

  13. Mining Deployment Optimization

    Science.gov (United States)

    Čech, Jozef

    2016-09-01

    The deployment problem, researched primarily in the military sector, is emerging in some other industries, mining included. The principal decision is how to deploy some activities in space and time to achieve desired outcome while complying with certain requirements or limits. Requirements and limits are on the side constraints, while minimizing costs or maximizing some benefits are on the side of objectives. A model with application to mining of polymetallic deposit is presented. To obtain quick and immediate decision solutions for a mining engineer with experimental possibilities is the main intention of a computer-based tool. The task is to determine strategic deployment of mining activities on a deposit, meeting planned output from the mine and at the same time complying with limited reserves and haulage capacities. Priorities and benefits can be formulated by the planner.

  14. Study on Dominant Industry Selection of Henan province%河南工业主导产业选择研究

    Institute of Scientific and Technical Information of China (English)

    彭刚

    2014-01-01

    以河南省27个工业行业为例,采用区位商、比较劳动生产率和产业梯度系数综合对主导产业的选择进行研究。研究表明,河南工业主导产业应为:非金属矿制品产业、食品制造业、有色金属矿采业、非金属矿采业、饮料制造业、有色金属冶炼业、造纸业和专用设备制造业等。%Taking 27 industries of Henan province as an example,using location quotient,comparative labor pro-ductivity and industrial gradient coefficient,this paper researches on the dominant industry selection. The study shows that dominant industries in Henan province are non - metal products,food manufacturing,colored metal min-ing,non - metal mining,beverage manufacturing,colored metal smelting and pressing,paper - making,and spe-cial equipment manufacturing.

  15. Computer Simulation of the Formation of Non-Metallic Precipitates During a Continuous Casting of Steel

    Directory of Open Access Journals (Sweden)

    Kalisz D.

    2016-03-01

    Full Text Available The authors own computer software, based on the Ueshima mathematical model with taking into account the back diffusion, determined from the Wołczyński equation, was developed for simulation calculations. The applied calculation procedure allowed to determine the chemical composition of the non-metallic phase in steel deoxidised by means of Mn, Si and Al, at the given cooling rate. The calculation results were confirmed by the analysis of samples taken from the determined areas of the cast ingot. This indicates that the developed computer software can be applied for designing the steel casting process of the strictly determined chemical composition and for obtaining the required non-metallic precipitates.

  16. Non-metallic catalysts for diamond synthesis under high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    孙力玲; 吴奇; 戴道扬; 张君; 秦志成; 王文魁

    1999-01-01

    Recent results on conversion from graphite to diamond by aid of non-metallic catalysts are reviewed. The current status of experimental advances is presented and typical examples from relevant literature are provided for understanding the mechanism of the graphite-diamond conversion by aid of these non-metallic catalysts. Furthermore, a tendency of graphite-diamond transformation assisted by carbonates, sulfates or phosphorus under high pressure and high temperature has been investigated by calculating the activation energy and transformation probability of the carbon atoms over a potential barrier. It was found that the activation energy is highly sensitive to the catalyst chosen. The probability sequence of graphite-diamond transformation with these catalysts was put forward.

  17. Color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for non metal clasp denture

    OpenAIRE

    Jang, Dae-Eun; Lee, Ji-Young; Jang, Hyun-Seon; Lee, Jang-Jae; Son, Mee-Kyoung

    2015-01-01

    PURPOSE The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study...

  18. Behavior of Non-metallic Inclusions in Centrifugal Induction Electroslag Castings

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    (para)In order to know the behavior of non-metallic inclusions in centrifugal induction electroslag castings (CIESC), non-metallic inclusions in 5CrMnMo and 4Cr5MoSiV1 were qualitatively and quantitatively analyzed. The largest size of inclusions in the casting and the thermodynamic possibility of TiN precipitation in steel were also calculated. The results show that sulfide inclusions are evenly distributed and the content is low. The amount of oxide inclusions in CIESC 4Cr5MoSiV1 steel is close to the ESR steel and lower than that in the EAF steel, and there are some differences along radial direction. Nitride inclusions are fine and the diameter of the largest one is 3~4um. With the increase of the centrifugal machine's rotational speed, the ratio of round inclusions increases and the ratio of sharp inclusions decreases. According to the experiment and the calculation results, it is pointed out that the largest diameter of non-metallic inclusions in the CIESC 4Cr5MoSiV1 casting is only 6.6mu, and [N%][Ti%] in 4Cr5MoSiV1 steel should be controlled less than 4.4~#U00d7tex010^{-5} in order to further reduce the amount and size of TiN inclusions.

  19. Oberbergamt fuer das Saarland und das Land Rheinland-Pfalz, Bergamt Saarbruecken / Bergamt Rheinland-Pfalz. Annual report 1998. Economic and technical aspects, industrial safety and environmental protection, statistics, activities of the mining authorities; Oberbergamt fuer das Saarland und das Land Rheinland-Pfalz, Bergamt Saarbruecken / Bergamt Rheinland-Pfalz. Jahresbericht 1998. Bergwirtschaft, Bergtechnik, Arbeitsschutz, Umweltschutz, Statistiken, Taetigkeiten der Bergbehoerde

    Energy Technology Data Exchange (ETDEWEB)

    Boettcher, R.; Hugo, K.H.; Kuhn, M.; Strauch, T. [comps.

    1999-07-01

    After outlining developmental trends in the various mining sectors as well as the structure and tasks of the State Mines Inspectorate, the annual report describes the activities in the fields of health and industrial safety, mining engineering and safety, and the environmental effects of mining activities, as well as special accidents and incidents. (HS) [German] Nach einem Ueberblick ueber die bergwirtschaftliche Entwicklung in den einzelnen Bergbauzweigen sowie ueber den Aufbau und die Zustaendigkeit der Bergbehoerde werden die Aktivitaeten in den Bereichen Arbeits- und Gesundheitsschutz, Bergtechnik und Sicherheit, Bergbau und Umwelt sowie bemerkenswerte Unfaelle und Vorkommnisse beschrieben. (HS)

  20. Impact of the Pb and Zn ore mining industry on the pollution of the Biała Przemsza River, Poland.

    Science.gov (United States)

    Jabłońska-Czapla, Magdalena; Nocoń, Katarzyna; Szopa, Sebastian; Łyko, Aleksandra

    2016-05-01

    The development of mining and metallurgic industries of Pb and Zn ores in the Biała Przemsza catchment area has had a strong influence on the condition of the surface water and bottom sediments. In the following study, total contents of metals and metalloids were researched in the water and bottom sediment samples from the Biała Przemsza River. The samples were collected monthly in 2014 at five sampling points along the river. The research helped to determine correlations between the parameters and components of the water environment (metals/metalloids, cations/anions, pH, Eh, conductivity, carbon (TOC, IC, TC), and suspension). The contents of metals and metalloids were determined with inductively coupled plasma-mass spectrometry (ICP-MS), whereas anions and cations were investigated with ion chromatography (IC). The simplified Community Bureau of Reference (BCR) three-step sequential chemical extraction was performed on Biała Przemsza River bottom sediments collected in April, July, and October. At its lower course, the Biała Przemsza River water did not meet the Polish surface water quality standards. The Biała Przemsza River water is mainly loaded with metals. Toxic concentrations of Cd, Pb, and Zn were observed at sampling points in Okradzionów and Sławków. The toxic Tl concentration was exceeded (2-6 μg/L) at three sampling points. The Biała Przemsza River bottom sediments were composed mostly of medium and fine sand. The BCR extraction of the bottom sediments demonstrated that Cd and Zn were bound to cations/anions and carbonates loosely adsorbed on the bottom sediments in spring and summer. Such a situation was observed at all the sampling points, except for BP3 in Okradzionów. The organic carbon concentration increased along the river course.

  1. Near wake region of an industrial scale wind turbine: comparing LES-ALM with LES-SMI simulations using data mining (POD)

    Science.gov (United States)

    Tabib, Mandar; Salman Siddiqui, M.; Fonn, Eivind; Rasheed, Adil; Kvamsdal, Trond

    2017-05-01

    Accurate prediction of power generation capability needs proper assessment of blade loading and wake behavior. In this regard, the Sliding Mesh Interface (SMI) approach and the Actuator Line Model (ALM) are two diverse computational fluid dynamics (CFD) based approaches of simulating the turbine behavior, each having its own merits and demerits. The SMI technique simulates the unsteady flow by explicitly modeling the blades and their rotation using a dynamic mesh, while in Actuator Line Model, the blades are not modeled explicitly but each blade is resolved as a rotating line (made of N actuator segments), over which the forces are computed. The current work focuses on simulating an industrial scale reference turbine and in differentiating the near wake dynamics predicted by these two approaches using Large Eddy Simulation (LES) and Proper Orthogonal Decomposition (POD) technique (a data mining tool). Initially, the ALM is compared with FAST model for the prediction of variation of power coefficient with the Tip Speed Ratio (TSR). The ALM is able to capture the varying trend and it predicts a similar optimum tip speed ratio as the FAST model. At this optimum TSR condition, the ALM is compared with the SMI method for a study limited to the near wake region. Comparisons between SMI and ALM shows that : (a) The SMI is predicting more complex 3D nature of the flow, and (b) the POD shows that ALM captures the shear regions of wake but it does not capture the vast compendium of length and time scales of eddies as SMI does. However, despite these limitations, the ALM has been able to capture the qualitative trend in wake deficit and the power coefficient variation with tip speed.

  2. Evaluation of Characteristics of Non-Metallic Inclusions in P/M Ni-Base Superalloy by Automatic Image Analysis

    Institute of Scientific and Technical Information of China (English)

    Li; Xinggang; Ge; Changchun; Shen; Weiping

    2007-01-01

    Non-metallic inclusions,especially the large ones,within P/M Ni-base superalloy have a major influence on fatigue characteristics,but are not directly measurable by routine inspection.In this paper,a method,automatic image analysis,is proposed for estimation of the content,size and amount of non-metallic inclusions in superalloy.The methodology for the practical application of this method is described and the factors affecting the precision of the estimation are discussed.In the experiment,the characteristics of the non-metallic inclusions in Ni-base P/M superalloy are analyzed.

  3. Longwall mining

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-14

    As part of EIA`s program to provide information on coal, this report, Longwall-Mining, describes longwall mining and compares it with other underground mining methods. Using data from EIA and private sector surveys, the report describes major changes in the geologic, technological, and operating characteristics of longwall mining over the past decade. Most important, the report shows how these changes led to dramatic improvements in longwall mining productivity. For readers interested in the history of longwall mining and greater detail on recent developments affecting longwall mining, the report includes a bibliography.

  4. 大伙房水库上游矿产企业的潜在风险研究%A Study on the Potential Risks of Mining Industry at the Upper Reaches of Dahuofang Reservoir

    Institute of Scientific and Technical Information of China (English)

    刘冲

    2011-01-01

    对大伙房水库上游矿产企业尾矿库进行样品采集,分析其矿渣及渗滤液特征污染因子含量,并与库区沉积物中重金属含量进行比对,结果表明:金矿、铜矿的尾矿库对水库水质安全潜在威胁较大,铁矿次之,分析其污染成因,提出防范措施.%Samples were collected from the tailing ponds of mining industry at the upper reaches of Dahuofang Reservoir. The concentrations of the characteristic contaminants in slag and leachate were analyzed, and then compared with the heavy metal concentrations in reservoir sediment. The results showed that the tailing ponds of the gold mine and copper mine had relatively higher potential impacts on the water quality in the reservoir comparing to the iron mine. The pollution sources were investigated and the preventive measures were suggested.

  5. Numerical modelling approach for mine backfill

    Indian Academy of Sciences (India)

    MUHAMMAD ZAKA EMAD

    2017-09-01

    Numerical modelling is broadly used for assessing complex scenarios in underground mines, including mining sequence and blast-induced vibrations from production blasting. Sublevel stoping mining methods with delayed backfill are extensively used to exploit steeply dipping ore bodies by Canadian hard-rockmetal mines. Mine backfill is an important constituent of mining process. Numerical modelling of mine backfill material needs special attention as the numerical model must behave realistically and in accordance with the site conditions. This paper discusses a numerical modelling strategy for modelling mine backfill material. Themodelling strategy is studied using a case study mine from Canadian mining industry. In the end, results of numerical model parametric study are shown and discussed.

  6. Coal mining in socioeconomic aspect

    OpenAIRE

    ZALOZNOVA YU. S.

    2014-01-01

    The article investigate the correlation of economic and social factors in the development of coal mining on example of vertically integrated companies with both domestic and foreign assets. The effect of socioeconomic aspects which have led to the American paradox of coal is studied to understand the essence of the coal mining industry at the present stage of the global economic management.

  7. Research on the Accounting for Coefficients of Pollutant Generation and Discharge in Ferrous Metal Mining and Separating Industry%黑色金属采选业产排污系数核算研究

    Institute of Scientific and Technical Information of China (English)

    彭兴文; 杨曼

    2012-01-01

    The scientific " combination of the four same kinds" and subject implementation plans were worked out in the light of production characteristics and present distribution of enterprises in ferrous metal mining and separating industry. Through collection of the historical measured data and field measurement data on 114 enterprises in China's ferrous metals mining and separating industry,analysis and calculation of the test data as well as the reliability demonstration,a large number of pollutant generation and discharge coefficients were obtained. The total number of the original historical coefficients was 879; the total number of the calculated individual emission coefficients was 303. Meanwhile the determination of the pollutant generation and discharge coefficients in China's black metal mining and separating industry plays an important role for the guidance of the first census of industrial pollution in China.%针对我国黑色金属采选业生产特点和企业分布现状,制定了科学合理的分析调查四同组合及课题实施方案.通过对我国114座黑色金属采选企业的历史实测数据调查与现场产排污数据实测,并对测试数据进行了分析计算和可靠性验证,获取了879组原始产排污系数、303组个体产排污系数,编制了黑色金属采选业产排污系数手册,对指导我国第一次工业污染源普查具有重要作用.

  8. Non-metallic, non-Fermi-liquid resistivity of FeCrAs from 0 to 17 GPa.

    Science.gov (United States)

    Tafti, F F; Wu, W; Julian, S R

    2013-09-25

    An unusual, non-metallic resistivity of the 111 iron-pnictide compound FeCrAs is shown to be relatively unchanged under pressures of up to 17 GPa. Combined with our previous finding that this non-metallic behaviour persists from at least 80 mK to 800 K, this shows that the non-metallic phase is exceptionally robust. Antiferromagnetic order, with a Néel temperature TN ∼ 125 K at ambient pressure, is suppressed by pressure at a rate of 7.0 ± 0.4 K GPa(-1), falling to ∼50 K at 10 GPa. We conclude that the formation of a spin-density-wave gap at TN does not play an important role in the non-metallic resistivity of FeCrAs at low temperatures.

  9. Study of the nature of non-metallic inclusions in samples of aluminum and silicon killed low carbon steels, collected in the refining treatment and continuous casting stages

    Directory of Open Access Journals (Sweden)

    José Carlos Santos Pires

    2004-12-01

    Full Text Available The amount, distribution, size and chemical composition of non-metallic inclusions have a direct influence on steel properties. By controlling size and chemical composition of these inclusions, it is possible to get a product with good quality. The identification of the nature and the control of inclusion formation are very important for steel cleanness. The behavior of these inclusions is predictable, in some extent, by the determination of the chemical composition of non-metallic phases that form such inclusions. With the objective of studying the chemical composition, the size and the distribution of such inclusions, samples of aluminum and silicon killed low carbon steels were collected in a national steel industry in the secondary refining and continuous casting stages. These samples were analyzed in the scanning electron microscope (SEM coupled to an energy dispersive analysis system (EDS. From the results, it was possible to evaluate the nature of inclusions and to analyze the effectiveness of the refining process in the reduction of the number and area fraction of the inclusions. It was also possible to verify that the inclusions that remained after treatment, are less damage both to the steel properties as to the continuous casting process (clogging of the submerged valve.

  10. Strength and deformability of compressed concrete elements with various types of non-metallic fiber and rods reinforcement under static loading

    Science.gov (United States)

    Nevskii, A. V.; Baldin, I. V.; Kudyakov, K. L.

    2015-01-01

    Adoption of modern building materials based on non-metallic fibers and their application in concrete structures represent one of the important issues in construction industry. This paper presents results of investigation of several types of raw materials selected: basalt fiber, carbon fiber and composite fiber rods based on glass and carbon. Preliminary testing has shown the possibility of raw materials to be effectively used in compressed concrete elements. Experimental program to define strength and deformability of compressed concrete elements with non-metallic fiber reinforcement and rod composite reinforcement included design, manufacture and testing of several types of concrete samples with different types of fiber and longitudinal rod reinforcement. The samples were tested under compressive static load. The results demonstrated that fiber reinforcement of concrete allows increasing carrying capacity of compressed concrete elements and reducing their deformability. Using composite longitudinal reinforcement instead of steel longitudinal reinforcement in compressed concrete elements insignificantly influences bearing capacity. Combined use of composite rod reinforcement and fiber reinforcement in compressed concrete elements enables to achieve maximum strength and minimum deformability.

  11. Data Mining and Discovery of Chemical Knowledge

    Science.gov (United States)

    Wencong, Lu

    In this chapter, the Data mining methods adopted are briefly introduced. The main focuses are on the successful applications of data mining methods in chemistry and chemical engineering. The discoveries of chemical knowledge cover the formation of ternary Intermetallic compounds, structure activity relationships of drugs, and industrial optimization based on chemical data mining methods, especially by using statistical pattern recognition and support vector machine.

  12. Planning, simulation and real time representation of processes in the coal mining industry with the use of 'Virtual Reality'; Planung, Simulation und Echtzeitdarstellung von Prozessen im Steinkohlenbergbau unter Einsatz von 'Virtueller Realitaet'

    Energy Technology Data Exchange (ETDEWEB)

    Rossmann, M. [Abteilung Technisches Innovationsmanagement (TI), Deutsche Steinkohle AG, Herne (Germany); Badia, W. [Abteilung KC Informationstechnologie bei der Deutschen Steinkohle AG, Herne (Germany)

    2002-12-05

    In the course of a research and development project a virtual reality system, which accompanies the process in the coal mining industry from the planning phase via the training phase to 3D real time visualisation, was developed. VR is a systematic driving force of expedited development processes in particular, in planning and production processes. The use of VR permits consideration of a mine as well as faces at all process and planning levels as a digital factory. (orig.) [German] Im Rahmen eines Forschungs- und Entwicklungsvorhabens wurde ein Virtual-Reality-System entwickelt, welches die Prozesse im Steinkohlenbergbau von der Planungsphase ueber die Trainings- und Schulungsphase bis hin zur 3-D-Echtzeitvisualisierung begleitet. Besonders beim Planungs- und Produktentstehungsprozess zeichnet sich VR als gezielter Treiber beschleunigter Entwicklungsprozesse aus. Der Einsatz von VR gestattet die Betrachtung eines Bergwerks sowie Betriebspunkte in allen Prozess- und Planungsebenen als digitale Fabrik. (orig.)

  13. [Occupational sanitary-and-hygienic conditions and chronic dust bronchitis morbidity in the ore-mining industry of Krivoi Rog region].

    Science.gov (United States)

    Gural', O I

    2005-01-01

    Chronic dust bronchitis morbidity of ore-mining workers is caused not only by high concentration of dust but also conditioned by carbon monoxide, nitric oxide, oil aerosols, unfavorable microclimate as well as different combinations of these adverse agents.

  14. Financial Responsibility Calculator to Accompany Proposed Requirements Under CERCLA Section 108(b) For Classes of Facilities in the Hardrock Mining Industry

    Science.gov (United States)

    This calculator will help stakeholders (owners and operators) of hardrock mines or mineral processing facilities calculate the amount of financial responsibility they should obtain under the proposed CERCLA 108b requirements

  15. Efluent treatment with dolomite mining

    OpenAIRE

    Romero Baylón, Alfonso; UNMSM; Flores Chávez, Silvana; UNMSM; Arévalo, Walter; UNMSM

    2014-01-01

    The article shows a methodology for acid water treatment, through the remediation of effluents from the mining industry, based on the use of treated dolomite, which reduces the concentrations of dissolved heavy metal ions in metallurgical and mining effluent to reducing high levels of heavy metals, which are indicators of improved water quality of industrial wastes, mainly from metallurgical processes concentrator plants. This treatment technique solves the problem of effluent generation with...

  16. Non-metallic inclusions structure dimension in high quality steel with medium carbon contents

    Directory of Open Access Journals (Sweden)

    T. Lipiński

    2009-07-01

    Full Text Available The experimental material consisted of semi-finished products of high-grade, medium-carbon structural steel. The production process involved two melting technologies: steel melting in a 140-ton basic arc furnace with desulfurization and argon refining variants, and in a 100-ton oxygen converter. Billet samples were collected to analyze the content of non-metallic inclusions with the use of an optical microscope and a video inspection microscope. The results were processed and presented in graphic form.

  17. Separation of the metallic and non-metallic fraction from printed circuit boards employing green technology.

    Science.gov (United States)

    Estrada-Ruiz, R H; Flores-Campos, R; Gámez-Altamirano, H A; Velarde-Sánchez, E J

    2016-07-05

    The generation of electrical and electronic waste is increasing day by day; recycling is attractive because of the metallic fraction containing these. Nevertheless, conventional techniques are highly polluting. The comminution of the printed circuit boards followed by an inverse flotation process is a clean technique that allows one to separate the metallic fraction from the non-metallic fraction. It was found that particle size and superficial air velocity are the main variables in the separation of the different fractions. In this way an efficient separation is achieved by avoiding the environmental contamination coupled with the possible utilization of the different fractions obtained. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. A Review of Post and Core Application with Emphasize on Non Metallic Posts

    Directory of Open Access Journals (Sweden)

    Shahroodi MH

    2001-05-01

    Full Text Available Many different methods are suggested to restore endodontically treated teeth. Prefabricated posts can not be indicated for all teeth and cast posts require extra time and cost. In addition, with the introduction of full ceramic restorations, achieving the ideal esthetic with metal post underneath them may be problematic or impossible because the darkness of the metallic posts may show through the highly translucent all ceramic restorations. In this article the review of litature and describiton of applied methods of different procedure in restoring the root canal therapied teeth and few techniques of non metallic posts fabrication such as fiber reinforced composite and zirconium oxide posts have been described.

  19. SolidWorks三维建模在矿山行业中的应用%Application of SolidWorks 3D Modeling in the Mining Industry

    Institute of Scientific and Technical Information of China (English)

    李大明

    2011-01-01

    The paper first analyzed the significance of the three-dimensional modeling of mining engineering in mine construction pracess, by means of mechanical software SolidWorks, through three-dimensional modeling steps, achieved the mine's three-dimensional modeling. The results show that mining design, the application af three-dimensional visualization techniques can improve the efficiency of mining engineering, it makes mining more intuitive , image, easy to understand , application prospects in the future will be more and more widely.%分析了采矿工程三维建模在矿山建设过程中的意义,借助于机械软件SolidWorks,通过三维建模步骤,实现了矿山的三维建模.结果表明,在矿山采矿设计中,应用可视化三维技术可以提高采矿工程的工作效率,使采矿工作更加直观、形象和容易理解,今后的应用前景必将越来越广泛.

  20. Mining e-commerce goes mainstream

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.A.

    2002-11-01

    E-activity is growing as coal industry producers and suppliers map out the most useful routes to the digital marketplace. The paper analyses the development of E-commerce in mining and coal industry. 2 figs.

  1. 可持续发展视野下我国矿业权之重构研究%Research on the reconstruction of mining industry right from the perspective of the sustainable development in China

    Institute of Scientific and Technical Information of China (English)

    袁俊

    2012-01-01

    我国将矿业权作为探矿权和采矿权之上位权,导致两种性质截然不同的权利被混为一谈,矿业权“依法取得”之公权性质与其“物权”之私权性质相捆绑以及《物权法》对矿业权的“用益物权”之定位,造成矿业权理论的混乱与非科学性,在一定程度上导致矿产资源浪费、生态环境破坏等现实问题.因此,我国矿业权理论的重构非常必要.在重构矿业权的同时,应当重新调整国家定位,淡化其经营者身份,使其着力于矿业市场的培育与规范、社会公共利益及国家安全的保护.由此达到规范矿产资源开发利用、保护生态环境实现可持续发展的目的.%Chinese legal system regards mining industry right as the upper right of the mining exploration right and mining right, the two different kinds of rights were confused, the nature of Mining industry right which including public aspect for its "legally obtained" and private aspect for its "property rights" location in "Property Law" were made to be chaos and non-scientific, to some extent, this situation lead to some practical problems, foe example waste of mineral resources, ecological destruction and so on. We should reconstruct mining industry rights and readjust the status of the government. Thus we can regulate the development and utilization of mineral resources,the protection of the ecological environment and achieve the purpose of sustainable development.

  2. Gradual Accumulation of Heavy Metals in an Industrial Wheat Crop from Uranium Mine Soil and the Potential Use of the Herbage

    Directory of Open Access Journals (Sweden)

    Gerhard Gramss

    2016-10-01

    Full Text Available Testing the quality of heavy-metal (HM excluder plants from non-remediable metalliferous soils could help to meet the growing demands for food, forage, and industrial crops. Field cultures of the winter wheat cv. JB Asano were therefore established on re-cultivated uranium mine soil (A and the adjacent non-contaminated soil (C. Twenty elements were determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS from soils and plant sections of post-winter seedlings, anthesis-state, and mature plants to record within-plant levels of essential and toxic minerals during ripening and to estimate the (reuse of the soil-A herbage in husbandry and in HM-sensitive fermentations. Non-permissible HM loads (mg∙kg−1∙DW of soil A in Cd, Cu, and Zn of 40.4, 261, and 2890, respectively, initiated the corresponding phytotoxic concentrations in roots and of Zn in shoots from the seedling state to maturity as well as of Cd in the foliage of seedlings. At anthesis, shoot concentrations in Ca, Cd, Fe, Mg, Mn, and Zn and in As, Cr, Pb, and U had fallen to a mean of 20% to increase to 46% during maturation. The respective shoot concentrations in C-grown plants diminished from anthesis (50% to maturity (27%. They were drastically up/down-regulated at the rachis-grain interface to compose the genetically determined metallome of the grain during mineral relocations from adjacent sink tissues. Soil A caused yield losses of straw and grain down to 47.7% and 39.5%, respectively. Nevertheless, pronounced HM excluder properties made Cd concentrations of 1.6–3.08 in straw and 1.2 in grains the only factors that violated hygiene guidelines of forage (1. It is estimated that grains and the less-contaminated green herbage from soil A may serve as forage supplement. Applying soil A grains up to 3 and 12 in Cd and Cu, respectively, and the mature straw as bioenergy feedstock could impair the efficacy of ethanol fermentation by Saccharomyces cerevisiae.

  3. CSIR Division of Mining Technology annual review 1993/94

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The Division of Mining Technology of the CSIR (Council for Scientific and Industrial Research) works in partnership with the mining industry to solve problems threatening the health, safety and well-being of the workforce, and the productivity of mining operations through the development and implementation of knowledge and technology. The annual review describes the Division's research projects in the following field: rock engineering (for gold, platinum and coal mining); mining environment; occupational hygiene; surface environment; and mining equipment and systems (systems and equipment, orebody information, coal mining and causes of accidents). Details are also given of the Division's publications, research and consultancy services and information centre.

  4. Light Stable Isotopes in Aquifers Affected by Mining Activities in a Brazilian Mining Province

    Science.gov (United States)

    Moreira, R. M.; de Carvalho, J. B.

    2013-05-01

    Iron ore is presently a main item in the Brazilian commercial agenda. Large reserves have converted this utility into an important source of export earnings and, secondarily, of raw materials for the domestic industry. Parallel to a boom in mining activities in the last years environmental impacts and a stress on natural resources have soared. A region exhibiting pronouncedly intensive mining activities lies in the central part of the State of Minas Gerais, the third economy of the federation. Mines are sited right beside the capital and neighbor towns amounting to nearly five million inhabitants and a pronounced dependence on groundwater resources. Besides, this region is a water divide enclosing the sources of main contributors to the most strategic fluvial basins in the country. Iron ore is by large the main mineral but other metals (including gold and uranium), as well as non-metals such as limestone, quartz and granite, also occur. Given the significance of this commodity in the country's trade balance and the demand of water resources with acceptable quality for human consumption, the scale of ensuing water use conflicts caused by its exploration is wide ranging and has to be coped with well grounded environmental assessment approaches. Tracer hydrology techniques might be a valuable tool in this context. The characteristics of the area being impacted have been surveyed, including climate and pluviometry, stratigraphic litology, geological structure, use of soil, mineral resources and their exploration, surface and ground water hydrology and their sundry uses. Data to be processed have been procured at local public agencies but as regard local hydrological features, particularly isotopic compositions, ad hoc surveys and methodologies were required. One instance concerns pluviometric isotopy due to the alpine character of the surveyed region altitude and temperature effects might take place. Hence different sites were monitored; cumulative pluviometer samples

  5. [An optical-fiber-sensor-based spectrophotometer for soil non-metallic nutrient determination].

    Science.gov (United States)

    He, Dong-xian; Hu, Juan-xiu; Lu, Shao-kun; He, Hou-yong

    2012-01-01

    In order to achieve rapid, convenient and efficient soil nutrient determination in soil testing and fertilizer recommendation, a portable optical-fiber-sensor-based spectrophotometer including immersed fiber sensor, flat field holographic concave grating, and diode array detector was developed for soil non-metallic nutrient determination. According to national standard of ultraviolet and visible spectrophotometer with JJG 178-2007, the wavelength accuracy and repeatability, baseline stability, transmittance accuracy and repeatability measured by the prototype instrument were satisfied with the national standard of III level; minimum spectral bandwidth, noise and excursion, and stray light were satisfied with the national standard of IV level. Significant linear relationships with slope of closing to 1 were found between the soil available nutrient contents including soil nitrate nitrogen, ammonia nitrogen, available phosphorus, available sulfur, available boron, and organic matter measured by the prototype instrument compared with that measured by two commercial single-beam-based and dual-beam-based spectrophotometers. No significant differences were revealed from the above comparison data. Therefore, the optical-fiber-sensor-based spectrophotometer can be used for rapid soil non-metallic nutrient determination with a high accuracy.

  6. Solution behavior of hydrogen isotopes and other non-metallic elements in liquid lithium

    Energy Technology Data Exchange (ETDEWEB)

    Maroni, V.A.; Calaway, W.F.; Veleckis, E.; Yonco, R.M.

    1976-01-01

    Results of experimental studies to measure selected thermodynamic properties for systems of lithium with non-metallic elements are reported. Investigations of the Li-H, Li-D, and Li-T systems have led to the elucidation of the dilute solution behavior and the H/D/T isotope effects. In the case of the Li-H and Li-D systems, the principal features of the respective phase diagrams have been delineated. The solubility of Li-D in liquid lithium has been measured down to 200/sup 0/C. The solubility of Li/sub 3/N in liquid lithium and the thermal decomposition of Li/sub 3/N have also been studied. From these data, the free energy of formation of Li/sub 3/N and the Sieverts' constant for dissolution of nitrogen in lithium have been determined. Based on studies of the distribution of non-metallic elements between liquid lithium and selected molten salts, it appears that molten salt extraction offers promise as a means of removing these impurity elements (e.g., H, D, T, O, N, C) from liquid lithium.

  7. PVC-based composite material containing recycled non-metallic printed circuit board (PCB) powders.

    Science.gov (United States)

    Wang, Xinjie; Guo, Yuwen; Liu, Jingyang; Qiao, Qi; Liang, Jijun

    2010-12-01

    The study is directed to the use of non-metallic powders obtained from comminuted recycled paper-based printed circuit boards (PCBs) as an additive to polyvinyl chloride (PVC) substrate. The physical properties of the non-metallic PCB (NMPCB) powders were measured, and the morphological, mechanical and thermal properties of the NMPCB/PVC composite material were investigated. The results show that recycled NMPCB powders, when added below a threshold, tended to increase the tensile strength and bending strength of PVC. When 20 wt% NMPCB powders (relative to the substrate PVC) of an average diameter of 0.08 mm were added, the composite tensile strength and bending strength reached 22.6 MPa and 39.83 MPa, respectively, representing 107.2% and 123.1% improvement over pure PVC. The elongation at break of the composite material reached 151.94% of that of pure PVC, while the Vicat softening temperature of the composite material did not increase significantly compared to the pure PVC. The above results suggest that paper-based NMPCB powders, when used at appropriate amounts, can be effective for toughening PVC. Thus, this study suggests a new route for reusing paper-based NMPCB, which may have a significant beneficial environmental impact.

  8. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

    Science.gov (United States)

    Grady, Joseph E.; Halbig, Michael C.; Singh, Mrityunjay

    2015-01-01

    In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing", evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  9. Analysis of the investment environment in the mining industry in South Africa%南非矿业投资环境分析

    Institute of Scientific and Technical Information of China (English)

    王健

    2013-01-01

    Nowadays ,our country encourages and guides the mining enterprises to take part in the international cooperation of the mining investment ,and to implement “go out” strategy .Meanwhile ,the mining enterprises know about the mining investment environment of relative nations .This paper summarizes South African mineral resources endowment ,economic and trade relationship with China , analyses the mining policies and credit policies ,infrastructure and social public security ,and so om .The author think that there are many great risks in the investment of South Africa mining development ,and the mining enterprises should firstly seize the opportunity ,but risks must be avoided at the same time .%  当前,我们国家鼓励和引导国内矿业企业积极参与矿业投资国际合作,实施“走出去”战略,因此,矿业企业需要掌握相关国家的矿业投资环境。本文概述了南非矿产资源禀赋情况,与我国的经贸往来,分析了南非矿业政策和信贷政策、基础设施和社会治安状况,认为在南非投资矿业开发目前还存在着较大的风险,我们国家矿业企业在抓住机遇的同时更需要回避风险。

  10. Alexandra Masaitis, UNR NV, USA. PhD Grad St. Principles of Adoption of the Successful Environmental Policies and Practices Used in Developed Countries into the Russian Mining Industry

    Science.gov (United States)

    Masaitis, A.

    2012-12-01

    The successful implementation of the environmental policies in the mining industry is of a paramount importance, as it not only prevents both local and trans-border pollution but also guarantees a clean and healthy environment for the people regardless of their place of habitation. It is especially important to encourage the progress of the environmental policy implementation in less regulated countries such as the Russia because such countries have resource-oriented economy based on development of nonrenewable resources. Poor environmental practices in such countries will lead to local environmental crises that could eventually spill into surrounding countries including the most economically advanced. This abstract is a summary of a two-year research project attempted (1) to determine deficiencies of the Russian mining sector ecological policies and (2) to suggest substitute policies from developed countries that could be adapted to the Russian reality. The following research methods were used: 1. The method of the system analysis, where the system is an interaction of the sets of environmental policies; 2. The comparative method of inquiry, 3. Quantitative data analysis, where data was collected from "The collection of statistic data", the US EPA open reports, and the USGS Reports; 4. Review of the Norilsk Nickel Company annual reports. The following results were obtained: Identified the systemic crisis of the ecological environmental policies in the Russian mining sector based on the development of nonrenewable resources, in the absence of the ecological interest by the mining companies that lack mechanisms of environmental and public health protection, the lack of insurance policy, the lack of risk assessment, and in the presence of the audit and monitoring that do not address the local conditions. Based on the above, the following concepts were thought of to improve the environmental conditions in the Russian mining sector: 1. Was developed the Regional

  11. Taxation on mining and hydrocarbon investments

    Directory of Open Access Journals (Sweden)

    Beatriz De La Vega Rengifo

    2014-07-01

    Full Text Available This article comments the most important aspects of the tax treatment applicable to investments of mining and oil and gas industry. The document highlights the relevant tax topics of the general tax legislation(Income Tax Law and the special legislation of both industries (General Mining Law and Hydrocarbons Organic Law.

  12. Land reclamation in the lignite open pit mining industry of Central and Eastern Europe - a comparative discourse; Rekultivierung im Braunkohlenbergbau Mittel- und Osteuropas - eine vergleichende Betrachtung

    Energy Technology Data Exchange (ETDEWEB)

    Drebenstedt, C. [TU Bergakademie, Freiberg (Germany)

    2003-03-01

    This comparative discourse on land reclamation in the Central and East European lignite mining regions is based on a complex analysis of the prevailing natural, geological, technological and social conditions. Considering the above conditions, the reclaimed land in the mined-out lignite mines of Central and Eastern Europe will predominantly be used as forests, although farming is also possible under particularly suitable conditions. Some of the land is given over to recreational purposes and integrated into the relevant landscape. Large lakes in residual holes of former lignite mines have only been created in Germany so far, where the special requirements of nature preservation have also been given attention. As regards the planning and financing regulations and the regulations coordinating the use of the post-mining land, there are differences between the individual countries which must be attributed to the rather diverse legal conditions. In general, the tasks associated with recultivation are defined similarly, are based on scientific investigations and are implemented at a very high level. The exchange of experience should be continued also in the future. (orig.)

  13. Text Mining.

    Science.gov (United States)

    Trybula, Walter J.

    1999-01-01

    Reviews the state of research in text mining, focusing on newer developments. The intent is to describe the disparate investigations currently included under the term text mining and provide a cohesive structure for these efforts. A summary of research identifies key organizations responsible for pushing the development of text mining. A section…

  14. Text Mining.

    Science.gov (United States)

    Trybula, Walter J.

    1999-01-01

    Reviews the state of research in text mining, focusing on newer developments. The intent is to describe the disparate investigations currently included under the term text mining and provide a cohesive structure for these efforts. A summary of research identifies key organizations responsible for pushing the development of text mining. A section…

  15. Radioecological challenges for mining

    Energy Technology Data Exchange (ETDEWEB)

    Vesterbacka, P.; Ikaeheimonen, T.K.; Solatie, D. [Radiation and Nuclear Safety Authority (Finland)

    2014-07-01

    In Finland, mining became popular in the mid-1990's when the mining amendments to the law made the mining activities easier for foreign companies. Also the price of the minerals rose and mining in Finland became economically profitable. Expanding mining industry brought new challenges to radiation safety aspect since radioactive substances occur in nearly all minerals. In Finnish soil and bedrock the average crystal abundance of uranium and thorium are 2.8 ppm and 10 ppm, respectively. It cannot be predicted beforehand how radionuclides behave in the mining processes which why they need to be taken into account in mining activities. Radiation and Nuclear Safety Authority (STUK) has given a national guide ST 12.1 based on the Finnish Radiation Act. The guide sets the limits for radiation doses to the public also from mining activities. In general, no measures to limit the radiation exposure are needed, if the dose from the operation liable to cause exposure to natural radiation is no greater than 0.1 mSv per year above the natural background radiation dose. If the exposure of the public may be higher than 0.1 mSv per year, the responsible party must provide STUK a plan describing the measures by which the radiation exposure is to be kept as low as is reasonably achievable. In that case the mining company responsible company has to make a radiological baseline study. The baseline study must focus on the environment that the mining activities may impact. The study describes the occurrence of natural radioactivity in the environment before any mining activities are started. The baseline study lasts usually for two to three years in natural circumstances. Based on the baseline study measurements, detailed information of the existing levels of radioactivity in the environment can be attained. Once the mining activities begin, it is important that the limits are set for the wastewater discharges to the environment and environmental surveillance in the vicinity of

  16. The machinations in coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Round, C.

    1996-12-31

    The book presents a view of coal mining as seen by the author over a career of more than 40 years working in several coalfields in the UK and also undertaking consultancies and visits to coal mines in several other counties. It takes the format of episodes reported by the author of events and discussions with the people involved. There are three strands running through the book. Firstly, there is the biography of a family within the mining industry in the United Kingdom. The second strand of the book reflects the progress in mechanisation within the nationalised coal industry. Thirdly, the book traces the changes in the structural organisation of the British coal industry. The book captures the social side of the mining communities.

  17. 地理学视角下的独立工矿区研究%Geographical research on isolated mining and industrial areas

    Institute of Scientific and Technical Information of China (English)

    李倩; 张文忠; 王岱

    2013-01-01

    独立工矿区是因矿产资源开发而兴起,以资源开采加工为主导产业,矿业职工及其家属为居民主体,远离人口集聚区,经济社会功能相对独立的区域.独立工矿区作为重要的能源资源供给地,为国家经济建设和社会发展做出了重要贡献,但现在却成为当前全国经济发展方式转型过程中不平衡、不协调和不可持续的问题最为集中的地区之一.本文按照“从实践中总结理论”的思路,基于实地调研资料和既往研究成果,结合现有界定标准和相关概念的差异,对独立工矿区的概念进行辨析;并应用经济成长周期、地域生产综合体和演化经济地理等相关理论,分析了独立工矿区形成和发展的特征和规律,认为其本质上是资源丰富地区内部与外部系统之间相互作用和协调的结果;独立工矿区未来需以社会、经济和生态环境的协调为目标,立足其自身属性,实现多元化发展或特色发展.最后,对独立工矿区的未来研究方向进行了展望,主要包括独立工矿区界定标准的量化、资源环境承载力评价、地域功能演化机理研究和可持续发展模式的探讨.%With the social and economic development since the founding of PRC,numerous projects were initiated by the government at all levels to meet the increasing demand for energy and minimal resource,leading to the formation of resource exploitation and processing industry.Isolated mining and industrial area (IMIA),which evolved from long term exploitation of mineral resources in resource-rich regions,has made huge contributions to the social and economic development of China as a base of resource supply.After a great deal of achievements,however,the development of IMIA gradually slowed down in terms of diversified industrial development,equalization of public services,and integration of regional development,due to various historical restrictions.In addition to the IMIA related

  18. Türkiye Maden Sektörü İhracatına Konjonktürel Faktörlerin Etkisi(The Impact of Cyclical Factors on The Export of Mining Industry in Turkey

    Directory of Open Access Journals (Sweden)

    Alper SÖNMEZ

    2016-08-01

    Full Text Available The main purpose of the study is to analyze the cyclical fluctuations experienced in the export of mining industry in Turkey for the period over 1992-2013, and evaluate the development processes of the sector’s export by analyzing the economic factors behind these fluctuations. For this purpose, by using monthly and yearly time series data related to sector’s export, the estimated trend function is calculated by performing linear and quadratic regression analyses by the method of ordinary least squares. The results revealed that the estimated export trend function is a quadratic. According to the findings, it seems that the export of the sector rises and falls irregularly, it is also seen that these fluctuations have gained the stability especially for the pre-2000 period. This situation indicates that the export of the mining sector is affected from both internal and external many political and economic factors and that somehow it has been unable to stabilize in this period. After the 2000s, due to relatively stable and successful economic management, internal cyclical fluctuations are occurred at lower level. The most important cyclical fluctuation occurred in this period (after 2000s is 2008 global financial crisis, which is an external phenomenon; in subsequent two years the export of the Turkish mining sector declined 22 percent

  19. THE UNIFICATION OF THE CODE LISTS PROVIDED WITHIN THE DATA MODEL ORIGINATING FROM THE INSPIRE TECHNICAL GUIDELINES AND THE ONES PROVIDED FOR GESUT DATABASES IN THE CONTEXT OF POTENTIAL EXPLOITATION IN THE MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Andrzej ZYGMUNIAK

    2016-07-01

    Full Text Available This study is aimed at exposing differences between two data models in case of code lists values provided there. The first of them is an obligatory one for managing Geodesic Register of Utility Networks databases in Poland [9] and the second is the model originating from the Technical Guidelines issued to the INSPIRE Directive. Since the second one mentioned is the basis for managing spatial databases among European parties, correlating these two data models has an effect in easing the way of harmonizing and, in consequence, exchanging spatial data. Therefore, the study presents the possibilities of increasing compatibility between the values of the code lists concerning attributes for objects provid-ed in both models. In practice, it could lead to an increase of the competitiveness of entities managing or processing such databases and to greater involvement in scientific or research projects when it comes to the mining industry. More-over, since utility networks located on mining areas are under particular protection, the ability of making them more fitted to their own needs will make it possible for mining plants to exchange spatial data in a more efficient way.

  20. Long-term sustainability in the management of acid mine drainage ...

    African Journals Online (AJOL)

    2013-08-14

    Aug 14, 2013 ... Keywords: acid mine drainage, mine wastewater treatment, sewage sludge, sulphate removal, ... the AMD problem and both physico-chemical and biological ... industry here has been in decline, with the problems of mine.

  1. X-ray detection of ingested non-metallic foreign bodies.

    Science.gov (United States)

    Saps, Miguel; Rosen, John M; Ecanow, Jacob

    2014-05-08

    To determine the utility of X-ray in identifying non-metallic foreign body (FB) and assess inter-radiologist agreement in identifying non-metal FB. Focus groups of nurses, fellows, and attending physicians were conducted to determine commonly ingested objects suitable for inclusion. Twelve potentially ingested objects (clay, plastic bead, crayon, plastic ring, plastic army figure, glass bead, paperclip, drywall anchor, eraser, Lego™, plastic triangle toy, and barrette) were embedded in a gelatin slab placed on top of a water-equivalent phantom to simulate density of a child's abdomen. The items were selected due to wide availability and appropriate size for accidental pediatric ingestion. Plain radiography of the embedded FBs was obtained. Five experienced radiologists blinded to number and types of objects were asked to identify the FBs. The radiologist was first asked to count the number of items that were visible then to identify the shape of each item and describe it to a study investigator who recorded all responses. Overall inter-rater reliability was analyzed using percent agreement and κ coefficient. We calculated P value to assess the probability of error involved in accepting the κ value. Fourteen objects were radiographed including 12 original objects and 2 duplicates. The model's validity was supported by clear identification of a radiolucent paperclip as a positive control, and lack of identification of plastic beads (negative control) despite repeated inclusion. Each radiologist identified 7-9 of the 14 objects (mean 8, 67%). Six unique objects (50%) were identified by all radiologists and four unique objects (33%) were not identified by any radiologist (plastic bead, Lego™, plastic triangle toy, and barrette). Identification of objects that were not present, false-positives, occurred 1-2 times per radiologist (mean 1.4). An additional 17% of unique objects were identified by less than half of the radiologists. Agreement between radiologists was

  2. Present Status and Outlook or Coal Bed Methane Industrial Development in Coal Mine Area%煤矿区煤层气产业化发展现状与前景

    Institute of Scientific and Technical Information of China (English)

    申宝宏; 刘见中; 赵路正

    2011-01-01

    总结了中国近年来煤矿区煤层气排放、抽采、利用现状及清洁发展机制(CDM)项目进展.由于中国煤层气地质条件具有板块构造复杂;煤体结构破坏严重,渗透率普遍偏低;储层非均质性强;高煤阶煤和低煤阶煤占主导等特殊性,决定了中国煤层气产业化发展必须走煤层气与煤炭协调开发的道路,且应实行煤层气地面开发与井下抽采相结合的煤层气资源开发利用.通过与美国对比,指出中国70%以上煤田不适合地面大规模煤层气开发,而应结合井下采矿工程进度,采取地面井下相结合,地面预采、采动开采和井下抽采多种方式进行开发.最后分析了煤矿区煤层气开发与地面煤层气开发相比具有的优势和面临的困难,指出在国家激励政策的推动下,随着国家科技重大专项关键技术的研发和示范工程验证推广,煤矿区煤层气产业化进程必将得以加快.%The paper summarized the present status of the coal bed methane drainage, extraction and utilization and the progress of the clean development mechanism project in China coal mine in recent years.Due to the geological condition of the coal bed methane in China was complicated in the plate tectonics, the coal structure was seriously destroyed and the permeability was commonly low, the non- homogeneity of the deposit was strong, the high rank and low rank coal were taking the main position and other specialty, thus the coal bed methane industrial development in China shall be along the road of the coal bed methane and coal coordinative development.In addition,the coal bed methane resources development and utilization policy in combination with the coal bed methane surface development and the underground mine drainage should be implemented.In comparison with the USA, over 70% of the coalfields in China would not be suitable to have a large scale coal bed methane development at surface, but in according to the underground

  3. Occurrence of Thiobacillus ferroxidans and Thiobacillus thio-oxidans in effluent, basin of reject and boot-rejections of uranium extraction mine: mill industrial complex of Pocos de Caldas, MG, Brazil; Ocorrencia de Thiobacillus ferrooxidans e Thiobacillus thiooxidans em efluentes, bacia de rejeito e bota-foras de mina de extracao de uranio - complexo minero-industrial de Pocos de Caldas, MG

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Helena de Azevedo [Comissao Nacional de Energia Nuclear, Pocos de Caldas, MG (Brazil). Laboratorio; Garcia Junior, Oswaldo [UNESP, Araraquara, SP (Brazil). Inst. de Quimica. Dept. de Bioquimica e Tecnologia Quimica

    2000-07-01

    The sulfated minerals present in mining areas may cause serious environmental problems, because of the chemolithotrophic bacteria action of the gender Thiobacillus, mainly the T. ferroxidans and T. thio-oxidans. These microorganisms are able to oxidize mineral sulfates, elementary sulfur and the ferrous ion (T. ferroxidans), being capable of mobilizing radionuclides as the uranium for the environment. In this context, this study had the aim of investigating the occurrence and the fluctuations in the T. ferroxidans and T. thio-oxidans populations, in mine, effluent, tailing dam and waste rock of the Mine and Mill Industrial Complex of Pocos de Caldas-MG (ICPC). The relative seasonal behavior of some variables, when evaluated simultaneously indicated that the high values of oxidation-reduction potential, the low values of pH, the detection of the largest percentages of incidence and highest values of T. ferroxidans and T. thio-oxidans counting, observed in the sites 075, BIA, CM, BF4, BF8 and BE, indicated that these are the principal places of mine acid drainage occurrence and bio-leaching bacteria action in the ICPC and be considered critical sites, faced to a possible decommission measure. (author)

  4. Calculating the Carrying Capacity of Flexural Prestressed Concrete Beams with Non-Metallic Reinforcement

    Directory of Open Access Journals (Sweden)

    Mantas Atutis

    2011-04-01

    Full Text Available The article reviews moment resistance design methods of prestressed concrete beams with fibre-reinforced polymer (FRP reinforcement. FRP tendons exhibit linear elastic response to rupture without yielding and thus failure is expected to be brittle. The structural behaviour of beams prestressed with FRP tendons is different from beams with traditional steel reinforcement. Depending on the reinforcement ratio, the flexural behaviour of the beam can be divided into several groups. The numerical results show that depending on the nature of the element failure, moment resistance calculation results are different by using reviewed methods. It was found, that the use of non-metallic reinforcement in prestressed concrete structures is effective: moment capacity is about 5% higher than that of the beams with conventional steel reinforcement.Article in Lithuanian

  5. The share of non-metallic inclusions in high-grade steel for machine parts

    Directory of Open Access Journals (Sweden)

    T. Lipiński

    2010-10-01

    Full Text Available The aim of this work was to compare the differences in the purity steel in the dimensions of inclusion particles as dependent on various steel production processes. The experimental material consisted of semi-finished products of high-grade, medium-carbon constructional steel with: manganese, chromium, nickel, molybdenum and boron. The impurity content of steel was low as phosphorus and sulphur levels did not exceed 0.025%. The experimental material consisted of steel products obtained in three metallurgical processes: electric, electric with argon refining and oxygen converter with vacuum degassing of steel. Billet samples were collected to determine: chemical composition, relative volume of non-metallic inclusions, dimensions of impurities. The results were processed and presented in graphic form.

  6. Morphology and Orientation Selection of Non-metallic Inclusions in Electrified Molten Metal

    Science.gov (United States)

    Zhao, Z. C.; Qin, R. S.

    2017-10-01

    The effect of electric current on morphology and orientation selection of non-metallic inclusions in molten metal has been investigated using theoretical modeling and numerical calculation. Two geometric factors, namely the circularity ( fc ) and alignment ratio ( fe ) were introduced to describe the inclusions shape and configuration. Electric current free energy was calculated and the values were used to determine the thermodynamic preference between different microstructures. Electric current promotes the development of inclusion along the current direction by either expatiating directional growth or enhancing directional agglomeration. Reconfiguration of the inclusions to reduce the system electric resistance drives the phenomena. The morphology and orientation selection follow the routine to reduce electric free energy. The numerical results are in agreement with our experimental observations.

  7. Nuclide, metal and non metal levels in percolated water from soils fertilized with phosphogypsum

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Camilla Bof; Knupp, Eliana Aparecida Nonato; Palmieri, Helena E.L.; Jacomino, Vanusa Maria Feliciano, E-mail: cgbs@cdtn.b [Nuclear Technology Development Center (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Taddei, Maria Helena; Ciqueira, Maria Celia [Pocos de Caldas Lab., (LAPOC/CNEN), Pocos de Caldas, MG (Brazil)

    2009-07-01

    Systematic generation of residues is more and more worrying in today.s world; adequate storage and reutilization are of great importance. Since generation of residues has become impossible to avoid, the possibility of reuse must be studied and researched. An example of these residues is phosphogypsum, which is generated in phosphoric acid production at the rate of around 4.8 tons for each ton of phosphoric acid produced. Many studies seek to reuse phosphogypsum in agriculture as a source of calcium and sulfur, potassium or aluminum, especially in soils from Brazil's cerrado regions. Though phosphogypsum is mainly composed of dehydrated calcium sulfate, it can have high levels of heavy metals, non metals (As and Se), fluorides and natural radionuclides. Thus, its uncontrolled use as a soil conditioner can lead to contamination of underground water. (author)

  8. Acoustic resonance for nonmetallic mine detection

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W.

    1998-04-01

    The feasibility of acoustic resonance for detection of plastic mines was investigated by researchers at the Oak Ridge National Laboratory`s Instrumentation and Controls Division under an internally funded program. The data reported in this paper suggest that acoustic resonance is not a practical method for mine detection. Representative small plastic anti-personnel mines were tested, and were found to not exhibit detectable acoustic resonances. Also, non-metal objects known to have strong acoustic resonances were tested with a variety of excitation techniques, and no practical non-contact method of exciting a consistently detectable resonance in a buried object was discovered. Some of the experimental data developed in this work may be useful to other researchers seeking a method to detect buried plastic mines. A number of excitation methods and their pitfalls are discussed. Excitation methods that were investigated include swept acoustic, chopped acoustic, wavelet acoustic, and mechanical shaking. Under very contrived conditions, a weak response that could be attributed to acoustic resonance was observed, but it does not appear to be practical as a mine detection feature. Transfer properties of soil were investigated. Impulse responses of several representative plastic mines were investigated. Acoustic leakage coupling, and its implications as a disruptive mechanism were investigated.

  9. Comparing the co-evolution of production and test code in open source and industrial developer test processes through repository mining

    NARCIS (Netherlands)

    Van Rompaey, B.; Zaidman, A.E.; Van Deursen, A.; Demeyer, S.

    2008-01-01

    This paper represents an extension to our previous work: Mining software repositories to study coevolution of production & test code. Proceedings of the International Conference on Software Testing, Verification, and Validation (ICST), IEEE Computer Society, 2008; doi:10.1109/ICST.2008.47 Engineeri

  10. Model of Local Sustainable Development in the Areas of Co-Occurrence Natura 2000 Sites and Non Energy Mining Industry (NEEI

    Directory of Open Access Journals (Sweden)

    Krzysztof Wrana

    2014-01-01

    Originality/value: The model presented is an original proposal. This is the first attempt, in Poland, to indicate a scenario approach to solving problems concerning the impact mining has on nature. The approach should be applied both at a national and local level.

  11. Analysis and simulation of non-metallic inclusions in spheroidal graphite iron

    Science.gov (United States)

    Pustal, B.; Schelnberger, B.; Bührig-Polaczek, A.

    2016-03-01

    Non-metallic inclusions in spheroidal cast iron (SGI) reduce fatigue strength and yield strength. This type of inclusion usually accumulates at grain boundaries. Papers addressing this topic show the overall impact of both the fraction of so-called white (carbides) and black (non-metallic) inclusions on mechanical properties. In the present work we focus on the origin and the formation conditions of black Mg-bearing inclusions, further distinguishing between Si-bearing and non-Si-bearing Mg inclusions. The formation was simulated applying thermodynamic approaches. Moreover, appropriate experiments have been carried out and a large number of particles have been studied applying innovative feature analysis with regard to shape, size, and composition. Magnesium silicates are predicted at elevated oxygen concentrations, whereas at low levels of oxygen sulphides and carbides appear at a late stage of solidification. Experiments with three consecutive flow obstacles show that the amount of magnesium silicates decrease after each of the three obstacles, whereas the fraction of non-Si-bearing inclusions remains approximately constant. The size of inclusions divides in halves over the flow path and the number of particles increases accordingly. We point out that based on feature analysis Mg-O-C bearing inclusion show disadvantageous form factors for which reason this kind of inclusions may be extremely harmful in terms of crack initiation. All results obtained indicate that magnesium silicates are entrapped on mould filling, whereas Mg-(O, C, S, P, N) bearing particles are precipitates at late stages of solidification. Consequently, the only avoidance strategy is setting up optimum retained magnesium content.

  12. How does the mining industry contribute to sexual and reproductive health in developing countries? A narrative synthesis of current evidence to inform practice.

    Science.gov (United States)

    Dawson, Angela J; Homer, Caroline S

    2013-12-01

    To explore client and provider experiences and related health outcomes of sexual and reproductive health interventions that have been led by or that have involved mining companies. Miners, and those living in communities surrounding mines in developing countries, are a vulnerable population with a high sexual and reproductive health burden. People in these communities require specific healthcare services although the exact delivery needs are unclear. There are no systematic reviews of evidence to guide delivery of sexual and reproductive health interventions to best address the needs of men and women in mining communities. A narrative synthesis. A search of peer-reviewed literature from 2000-2012 was undertaken with retrieved documents assessed using an inclusion/exclusion criterion and quality appraisal guided by critical assessment tools. Concepts were analysed thematically. A desire for HIV testing and treatment was associated with the recognition of personal vulnerability, but this was affected by fear of stigma. Regular on-site services facilitated access to voluntary counselling and testing and HIV care, but concerns for confidentiality were a serious barrier. The provision of HIV and sexually transmitted infection clinical and promotive services revealed mixed health outcomes. Recommended service improvements included rapid HIV testing, the integration of sexual and reproductive health into regular health services also available to family members and culturally competent, ethical, providers who are better supported to involve consumers in health promotion. There is a need for research to better inform health interventions so that they build on local cultural norms and values and address social needs. A holistic approach to sexual and reproductive health beyond a focus on HIV may better engage community members, mining companies and governments in healthcare delivery. Nurses may require appropriate workplace support and incentives to deliver sexual and

  13. Teaching and research for the pit-and-quarry industry at the Institute of Mining; Lehre und Forschung fuer die Steine-und-Erden-Industrie am Institut fuer Bergbau

    Energy Technology Data Exchange (ETDEWEB)

    Walde, M. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau

    1998-11-01

    The contribution goes into the history of Freiberg Mining University from the 18th century to the present. The current syllabus is presented, and data are given on brown coal production and the number of brown coal mines in Germany. (orig.) [Deutsch] Der Beitrag beschaeftigt sich mit der Entwicklung der Lehre und Forschung an der Bergakademie Freiberg. Es werden die Veraenderungen in der Bergbauausbildung an der TU Bergakademie Freiberg vom 18. Jahrhundert bis heute sowie die derzeitige Gestaltung der Ausbildung geschildert. Zudem werden die Braunkohlenfoerdermengen und die Anzahl der foerdernden Betriebe in Deutschland aufgefuehrt.

  14. Identification of Mine-Shaped Objects based on an Efficient Phase Stepped-Frequency Radar Approach

    DEFF Research Database (Denmark)

    Sørensen, Helge Bjarup Dissing; Jakobsen, Kaj Bjarne; Nymann, Ole

    1997-01-01

    A computational efficient approach to identify very small mine-shaped plastic objects, e.g. M56 Anti-Personnel (AP) mines buried in the ground, is presented. The size of the objects equals the smallest AP-mines in use today, i.e., the most difficult mines to detect with respect to humanitarian mine...... a radar probe is moved automatically to measure in each grid point a set of reflection coefficients from which phase and amplitude information are extracted. Based on a simple processing of the phase information, quarternary image and template cross-correlation a successful detection of metal- and non......-metal mine-shaped objects is possible. Measurements have been performed on loamy soil containing different mine-shaped objects...

  15. Zunyi Molybdenum & Nickel Mining Enterprises Are Still in Suspension Status

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    According to the 2015 mid-year report of Tiancheng Holding,because Guizhou Province is still enforcing policy regulation&environmental; protection policy for molybdenum&nickel; mining industry,currently all molybdenum and nickel mining

  16. Uranium industry in Canada

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Current state of uranium industry in Canada has been considered. It is shown that in Canada, which is the major supplier of uranium, new methods of prospecting, mining and processing of uranium are developed and the old ones are improved. Owing to automation and mechanization a higher labour productivity in uranium ore mining is achieved. The uranium industry of Canada can satisfy the future demands in uranium but introduction of any new improvement will depend completely on the rate of nuclear power development.

  17. 烟草物流研究现状与行业数据挖掘技术解读%Research Status and Industry Data Mining Technology of Tobacco Logistics

    Institute of Scientific and Technical Information of China (English)

    张涛

    2016-01-01

    提高烟草物流运作效率,降低烟草流通成本是现阶段烟草行业在激烈的市场竞争中加强自身核心竞争力的重要举措。文中从介绍烟草行业的物流规划出发,分析了我国烟草行业物流运行的现状,并阐述了行业数据挖掘技术在烟草物流配送中的应用。%To improve the operational efficiency of the tobacco logistics,reduce circulation cost of tobacco is the stage of tobacco industry in the fierce competition in the market to strengthen its core competitiveness of an important measure.This thesis starts from the introduction of the tobacco industry logistics planning,analyses the current situation of China's tobacco industry logistics operation,and expounds the industry application of data mining technology in tobacco logistics distribution.

  18. Effects of mining activities on selected aquatic organisms

    OpenAIRE

    2012-01-01

    Ph.D. Except for agriculture, the mining industry is considered as not only the oldest but also the most important industry. Mining involves the removal of minerals from the earth's crust for usage by mankind. The disturbance during mining activities such as mining effluent has an effect on the natural aquatic environment. In any freshwater environment, the macroinvertebrates form a vital link between the abiotic envinronment and the organisms in higher trophic levels. It is thus true that...

  19. Influence of non-metallic inclusions on the strength properties of screws made of 35B2+Cr steel after softening

    OpenAIRE

    Krawczyk, J.; Pawłowski, B

    2012-01-01

    Purpose: This paper presents the results of the research on the influence of non-metallic inclusions on strength properties of 35B2+Cr steel screws.Design/methodology/approach: The investigations were carried out on screws after softening. The investigated steels with different fraction of non-metallic inclusions were delivered by three different suppliers.Findings: It was proved, that in spite of the level of fraction of non-metallic inclusions compatible with the corresponding standards, th...

  20. Socially Responsible Mining: the Relationship between Mining and Poverty, Human Health and the Environment

    OpenAIRE

    2014-01-01

    Increasing global demand for metals is straining the ability of the mining industry to physically keep up with demand (physical scarcity). On the other hand, social issues including the environmental and human health consequences of mining as well as the disparity in income distribution from mining revenues are disproportionately felt at the local community level. This has created social rifts, particularly in the developing world, between affected communities and both industry and government...