WorldWideScience

Sample records for niobate line patterns

  1. Transcription of domain patterns in near-stoichiometric magnesium-doped lithium niobate

    International Nuclear Information System (INIS)

    Zeng Hao; Tian Tian; Sun Tongqing; Kong Yongfa; Chen Shaolin; Zhang Ling; Rupp, Romano; Xu Jingjun

    2010-01-01

    Recently, light-induced domain reversal has been developed to a promising method for domain engineering, but the depth of reversed domain is only of several tens of microns, which greatly limits its practical applications. In this Letter, we fabricated domain patterns on the -z face of 1.0 mol % Mg doped near-stoichiometric lithium niobate with the assistance of a focal 532 nm laser, and then succeeded to transcribe these domain patterns from the -z to the +z face by applying external field without laser illumination. The transcribed domains have much larger depths, can sustain more than 100 times of the transcription cycles without large deformation, and can be erased by one transcription cycle with illumination of 532 nm laser. Finally, a light-induced ferroelectric domain transcription model was proposed.

  2. Optical cleaning of lithium niobate crystals

    International Nuclear Information System (INIS)

    Koesters, Michael

    2010-01-01

    An all-optical method for the removal of photoexcitable electrons from photorefractive centers to get rid of optical damage in lithium niobate crystals is presented, the so-called ''optical cleaning''. The method combines the photovoltaic drift of electrons with ionic charge compensation at sufficiently high temperatures of about 180 C. Optimum choice of the light pattern plus heat dramatically decreases the concentration of photoexcitable electrons in the exposed region leading to a suppression of optical damage. Experiments with slightly iron-doped lithium niobate crystals have shown an increase of the threshold for optical damage of more than 1000 compared to those of untreated crystals. (orig.)

  3. Optical cleaning of lithium niobate crystals

    Energy Technology Data Exchange (ETDEWEB)

    Koesters, Michael

    2010-01-15

    An all-optical method for the removal of photoexcitable electrons from photorefractive centers to get rid of optical damage in lithium niobate crystals is presented, the so-called ''optical cleaning''. The method combines the photovoltaic drift of electrons with ionic charge compensation at sufficiently high temperatures of about 180 C. Optimum choice of the light pattern plus heat dramatically decreases the concentration of photoexcitable electrons in the exposed region leading to a suppression of optical damage. Experiments with slightly iron-doped lithium niobate crystals have shown an increase of the threshold for optical damage of more than 1000 compared to those of untreated crystals. (orig.)

  4. Enhanced double patterning decomposition using lines encoding

    Directory of Open Access Journals (Sweden)

    Khaled M. Soradi

    2016-09-01

    Full Text Available Double patterning photolithography (DPL is considered one of the best solutions used for enabling 32 nm/22 nm technology. In this paper, we propose a new technique for double patterning post decomposition conflict resolution. The algorithm is based on lines positions encoding followed by code pattern matching. Experimental results show that the usage of encoded patterns decreases the time needed for pattern matching and increases the matching accuracy. The overall manual problem solution time is reduced to about 1%.

  5. Quantitative texture analysis of electrodeposited line patterns

    DEFF Research Database (Denmark)

    Pantleon, Karen; Somers, Marcel A.J.

    2005-01-01

    Free-standing line patterns of Cu and Ni were manufactured by electrochemical deposition into lithographically prepared patterns. Electrodeposition was carried out on top of a highly oriented Au-layer physically vapor deposited on glass. Quantitative texture analysis carried out by means of x......-ray diffraction for both the substrate layer and the electrodeposits yielded experimental evidence for epitaxy between Cu and Au. An orientation relation between film and substrate was discussed with respect to various concepts of epitaxy. While the conventional mode of epitaxy fails for the Cu...

  6. Reduced Dimensionality Lithium Niobate Microsystems

    Energy Technology Data Exchange (ETDEWEB)

    Eichenfield, Matt [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-01-01

    The following report describes work performed under the LDRD program at Sandia National Laboratories October 2014 and September 2016. The work presented demonstrates the ability of Sandia Labs to develop state-of-the-art photonic devices based on thin film lithium niobate (LiNbO3 ). Section 1 provides an introduction to integrated LiNbO3 devices and motivation for developing thin film nonlinear optical systems. Section 2 describes the design, fabrication, and photonic performance of thin film optical microdisks fabricated from bulk LiNbO3 using a bulk implantation method developed at Sandia. Sections 3 and 4 describe the development of similar thin film LiNbO3 structures fabricated from LiNbO3 on insulator (LNOI) substrates and our demonstration of optical frequency conversion with state-of-the-art efficiency. Finally, Section 5 describes similar microdisk resonators fabricated from LNOI wafers with a buried metal layer, in which we demonstrate electro-optic modulation.

  7. Layout pattern analysis using the Voronoi diagram of line segments

    Science.gov (United States)

    Dey, Sandeep Kumar; Cheilaris, Panagiotis; Gabrani, Maria; Papadopoulou, Evanthia

    2016-01-01

    Early identification of problematic patterns in very large scale integration (VLSI) designs is of great value as the lithographic simulation tools face significant timing challenges. To reduce the processing time, such a tool selects only a fraction of possible patterns which have a probable area of failure, with the risk of missing some problematic patterns. We introduce a fast method to automatically extract patterns based on their structure and context, using the Voronoi diagram of line-segments as derived from the edges of VLSI design shapes. Designers put line segments around the problematic locations in patterns called "gauges," along which the critical distance is measured. The gauge center is the midpoint of a gauge. We first use the Voronoi diagram of VLSI shapes to identify possible problematic locations, represented as gauge centers. Then we use the derived locations to extract windows containing the problematic patterns from the design layout. The problematic locations are prioritized by the shape and proximity information of the design polygons. We perform experiments for pattern selection in a portion of a 22-nm random logic design layout. The design layout had 38,584 design polygons (consisting of 199,946 line segments) on layer Mx, and 7079 markers generated by an optical rule checker (ORC) tool. The optical rules specify requirements for printing circuits with minimum dimension. Markers are the locations of some optical rule violations in the layout. We verify our approach by comparing the coverage of our extracted patterns to the ORC-generated markers. We further derive a similarity measure between patterns and between layouts. The similarity measure helps to identify a set of representative gauges that reduces the number of patterns for analysis.

  8. Software Product Line for TVDi applications based on design patterns

    Directory of Open Access Journals (Sweden)

    Mirtha Fabiana Miranda

    2016-08-01

    Full Text Available The development of high quality interactive applications for Digital TV (TVDi in industrial scale, requires specific strategies that can be applied in order to develop them. From patterns of interaction design, based on the user, a Software Product Line (SPL for TVDi applications it is proposed to be built. SPL is a form of software development focused on promoting re-using and design patterns of interaction that guarantee the management of products. This project work presents the characteristics of an SPL in order to domain interactive applications for Digital TV, which were validated, mostly based on 32 prototypes, that apply design patterns of interaction based on the user.

  9. Line broadening in the PXRD patterns of layered hydroxides: The ...

    Indian Academy of Sciences (India)

    Unknown

    valent hydroxides are replete with structural disorder, and that the excessive and non-uniform broadening of lines in the PXRD patterns is on account of struc- tural disorder rather than due to crystallite size effects. We now extend these studies to another class of layered compounds, the layered double hydroxides. (LDHs).6 ...

  10. Line broadening in the PXRD patterns of layered hydroxides: The ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. Layered hydroxides crystallize in a hexagonal structure and incorporate a number of different types of structural disorders as an exigency of anisotropic bonding. Structural disorder contributes to the non-uniform broadening of lines in the powder X-ray diffraction pattern. Common among the disorders are stacking ...

  11. Line broadening in the PXRD patterns of layered hydroxides: The ...

    Indian Academy of Sciences (India)

    Layered hydroxides crystallize in a hexagonal structure and incorporate a number of different types of structural disorders as an exigency of anisotropic bonding. Structural disorder contributes to the non-uniform broadening of lines in the powder X-ray diffraction pattern. Common among the disorders are stacking faults, ...

  12. Catalytic oxidation of soot over alkaline niobates

    International Nuclear Information System (INIS)

    Pecchi, G.; Cabrera, B.; Buljan, A.; Delgado, E.J.; Gordon, A.L.; Jimenez, R.

    2013-01-01

    Highlights: ► No previous reported studies about alkaline niobates as catalysts for soot oxidation. ► NaNbO 3 and KNbO 3 perovskite-type oxides show lower activation energy than other lanthanoid perovskite-type oxides. ► The alkaline niobate does not show deactivation by metal loss. - Abstract: The lack of studies in the current literature about the assessment of alkaline niobates as catalysts for soot oxidation has motivated this research. In this study, the synthesis, characterization and assessment of alkaline metal niobates as catalysts for soot combustion are reported. The solids MNbO 3 (M = Li, Na, K, Rb) are synthesized by a citrate method, calcined at 450 °C, 550 °C, 650 °C, 750 °C, and characterized by AAS, N 2 adsorption, XRD, O 2 -TPD, FTIR and SEM. All the alkaline niobates show catalytic activity for soot combustion, and the activity depends basically on the nature of the alkaline metal and the calcination temperature. The highest catalytic activity, expressed as the temperature at which combustion of carbon black occurs at the maximum rate, is shown by KNbO 3 calcined at 650 °C. At this calcination temperature, the catalytic activity follows an order dependent on the atomic number, namely: KNbO 3 > NaNbO 3 > LiNbO 3 . The RbNbO 3 solid do not follow this trend presumably due to the perovskite structure was not reached. The highest catalytic activity shown by of KNbO 3 , despite the lower apparent activation energy of NaNbO 3 , stress the importance of the metal nature and suggests the hypothesis that K + ions are the active sites for soot combustion. It must be pointed out that alkaline niobate subjected to consecutive soot combustion cycles does not show deactivation by metal loss, due to the stabilization of the alkaline metal inside the perovskite structure.

  13. Innovative semielliptical seismic pattern improving line-change efficiency

    Science.gov (United States)

    Walus, Artur; Gucma, Lucjan; Bąk, Andrzej

    2016-12-01

    The paper presents a new method for conducting turns by vessels towing seismic cables. A comparison was made between the traditional way of turning to indicate the advantages of the proposed pattern. In order to improve the overview of the complete geometry of a towed streamer system, a model of marine seismic research quality coefficients was applied. The turning method was tested onboard a seismic vessel towing eight streamers of 6 km in length. A significant reduction of time required for line-change was achieved (up to 45 % depending on ocean current speed and direction, speed of the vessel, skills of navigating team). The introduced quality coefficient of geophysical research works is based on the mathematical model of positions deviation of streamers geophones with relation to their idealized position. The model was created to be used while the vessel is on a steady course to improve the quality of acquired data; however, it was found useful during line changes as well.

  14. Influence of UV light and heat on the ferroelectric properties of lithium niobate crystals

    Energy Technology Data Exchange (ETDEWEB)

    Steigerwald, Hendrik

    2011-08-15

    One of the most important non-linear-optical materials is lithium niobate, due to its ease of fabrication, robustness, transparency in the visible-to-infrared and excellent nonlinear properties. In this thesis the issue of tailoring ferroelectric domain structures in lithium niobate crystals is approached from two sides: interaction of defect structures inside the crystal with growing ferroelectric domains is investigated and also actual domain patterning on all crystal faces by different methods is performed. Special emphasis is given to the Mg-doped material. The fundamental understanding and the methods of domain patterning developed in this thesis are then used to obtain tailored domain structures that meet the requirements of their intended application in non-linear optics. (orig.)

  15. Conoscopic study of strontium-barium niobate single crystals

    Science.gov (United States)

    Kolesnikov, Aleksandr; Grechishkin, Rostislav; Malyshkina, Olga; Malyshkin, Yury; Dec, Jan; Łukasiewicz, Tadeusz; Ivanova, Aleksandra

    2013-12-01

    Optically transparent single crystals of strontium-barium niobate, SrxBa1-xNb2O6, of different compositions (x = 0.26...0.7) were examined with the aid of conoscopic light interference figures. A regular change of the isochrome concentric ring number and diameters consistent with the temperature variation of the value of birefringence is demonstrated by direct observations of polar cuts of optically uniaxial samples. Anomalous violations of the conventional (uniaxial) interference patterns occur occasionaly in some samples being indicative of the existence of biaxial trait in their behaviour even though no voltage is applied. These features may depend on annealing treatments at elevated temperatures. The results of the study show that conoscopic images may serve as a sensitive indicator of the structural state of SBN crystals related to the effects of stress-induced change of optical anisotropy and temperature dependent birefringence parameters.

  16. Method of forming oriented block copolymer line patterns, block copolymer line patterns formed thereby, and their use to form patterned articles

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Thomas P.; Hong, Sung Woo; Lee, Dong Hyun; Park, Soojin; Xu, Ting

    2017-08-01

    A block copolymer film having a line pattern with a high degree of long-range order is formed by a method that includes forming a block copolymer film on a substrate surface with parallel facets, and annealing the block copolymer film to form an annealed block copolymer film having linear microdomains parallel to the substrate surface and orthogonal to the parallel facets of the substrate. The line-patterned block copolymer films are useful for the fabrication of magnetic storage media, polarizing devices, and arrays of nanowires.

  17. Tantalo-Niobate from the Apollo-17 Regolith

    Science.gov (United States)

    Mokhov, A. V.; Kartashov, P. M.; Rybchuk, A. P.; Gornostaeva, T. A.; Bogatikov, O. A.

    2018-01-01

    Particles of tantalo-niobate of the ferrotantalite-manganotantalite series are discovered for the first time in two lunar regolith fragments delivered by the Apollo-17 mission. Allochtonous and autochtonous mineralization that accompanies tantalo-niobate in the regolith is described. An attempt is made to explain the formation of tantalite in anorthosites of the continental region of the Moon.

  18. Optical properties of lithium niobate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Palatnikov, M.N.; Sidorov, N.V.; Biryukova, I.V.; Kalinnikov, V.T. [Institute of Chemistry, Kola Science Centre RAS, 26a Fersman str., 184200 Apatity, Murmansk region (Russian Federation); Bormanis, K. [Institute of Solid State Physics, University of Latvia, 8 Kengaraga str., Riga, LV-1063 (Latvia)

    2005-01-01

    Studies of thermal and {gamma}-irradiation effects on the optical properties in congruous lithium niobate single crystals containing Y, Mg, Gd, B, and Zn dopants including samples with double dopants Y, Mg and Gd, Mg are reported. Formation of defects at irradiation and thermal treatment of the samples is explored by electron absorption spectra. Considerable increase of absorption with the dose of {gamma}-radiation is observed at 500 nm. The changes of absorption examined under different conditions are explained by creation and destruction of Nb{sup 4+} defects. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  19. Terahertz birefringence of potassium niobate crystals

    Science.gov (United States)

    Antsygin, V. D.; Mamrashev, A. A.; Nikolaev, N. A.

    2018-03-01

    We present terahertz optical properties (refractive indices and absorption coefficients) of potassium niobate crystals measured by time-domain spectroscopy in the range of 0.2-2.0 THz. We observe average refractive indices nx = 5.25, ny = 4.8, nz = 5.9 for corresponding optical axes X, Y, Z with the large birefringence of Δn = nz - ny = 1.1. We report rising absorption coefficient at higher frequencies (α ∼ 50 cm-1 at 1 THz for all three axes) while the dichroism is not pronounced. Somewhat higher absorption compared to the previous results could be attributed to some polydomain structure remaining in the crystal.

  20. Terahertz generation from Cu ion implantation into lithium niobate

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yuhua, E-mail: wyh61@163.com [Hubei Province Key Laboratory of Systems Science in Metallurgical Process, Wuhan university of Science and Technology, Wuhan 430081 (China); Wang, Ruwu; Yuan, Jie [Hubei Province Key Laboratory of Systems Science in Metallurgical Process, Wuhan university of Science and Technology, Wuhan 430081 (China); Wang, Yumei [Department of Nephrology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan 430022 (China)

    2014-03-15

    In this letter, the authors present first observation of terahertz generation from Cu implantation of lithium niobate crystal substrate. Lithium niobate single crystal is grown by Czochralski method. Metal nanoparticles synthesized by Cu ion implantation were implanted into lithium niobate single crystal using metal vapor vacuum arc (MEVVA) ion source. 1 kHz, 35 fs laser pulse centred at 800 nm was focused onto the samples. The supercontinuum spectra of the sample are obtained. Terahertz was generated via this kind of sample and investigated using the electro-optical sampling technique. The findings suggest that under the investigated implantation parameter, a strong spectral component in excess of 0.46 THz emission was found from Cu ion implantation of lithium niobate. -- Highlights: • We first observation of terahertz generation from Cu implantation of lithium niobate crystal substrate. • Lithium niobate single crystal is grown by Czochralski method. Cu nanoparticles in lithium niobate have been formed by using MEVVA ion source. • The THz bandwidth and center from this kind of sample were determined.

  1. Grating coupler on single-crystal lithium niobate thin film

    Science.gov (United States)

    Chen, Zhihua; Wang, Yiwen; Jiang, Yunpeng; Kong, Ruirui; Hu, Hui

    2017-10-01

    The grating coupler on single-crystal lithium niobate thin film (lithium niobate on insulator, LNOI) was designed. A bottom reflector was added in the LNOI material to improve the coupling efficiency. The grating structure was optimized by FDTD method. The material parameters such as layer thickness of lithium niobate thin film, SiO2 thickness were discussed with respect to the coupling efficiency, and the tolerances of grating period, etch depth, groove width and fiber position were also studied systematically. The simulated maximum coupling efficiency from a grating coupler with (without) bottom reflector to a single-mode fiber is about 78% (40%) in z-cut LNOI for TE polarization.

  2. Gold particle formation via photoenhanced deposition on lithium niobate

    Energy Technology Data Exchange (ETDEWEB)

    Zaniewski, A.M., E-mail: azaniews@asu.edu; Meeks, V.; Nemanich, R.J.

    2017-05-31

    Highlights: • Gold chloride is reduced into solid gold nanoparticles at the surface of a polarized semiconductor. • Reduction processes are driven by ultraviolet light. • Gold nanoparticle and silver nanoparticle deposition patterns are compared. - Abstract: In this work, we report on a technique to reduce gold chloride into sub-micron particles and nanoparticles. We use photoelectron transfer from periodically polarized lithium niobate (PPLN) illuminated with above band gap light to drive the surface reactions required for the reduction and particle formation. The particle sizes and distributions on the PPLN surface are sensitive to the solution concentration, with inhibited nucleation and large particles (>150 nm) for both low (2E−8M to 9E−7M) and high (1E−5M to 1E−3M) concentrations of gold chloride. At midrange values of the concentration, nucleation is more frequent, resulting in smaller sized particles (<150 nm). We compare the deposition process to that for silver, which has been previously studied. We find that the reduction of gold chloride into nanoparticles is inhibited compared to silver ion reduction, due to the multi-step reaction required for gold particle formation. This also has consequences for the resulting deposition patterns: while silver deposits into nanowires along boundaries between areas with opposite signed polarizations, such patterning of the deposition is not observed for gold, for a wide range of concentrations studied (2E−8 to 1E−3M).

  3. Research on cutoff wavelength of dominant mode and field patterns in trapezoidal microshield lines

    OpenAIRE

    SUN, Hai; WU, Yujiang

    2012-01-01

    The influence of the position of the metallic signal strip on the cutoff characteristic of the dominant mode and the field patterns in 3 types of trapezoidal microshield lines are calculated by the edge-based finite element method. These trapezoidal microshield lines include trapezoidal microshield lines with a single signal line, dual signal lines, and 3 signal lines. The cutoff wavelength of the dominant mode can be adjusted by changing the dimensions of metallic signal strips as w...

  4. Micromachining Lithium Niobate for Rapid Prototyping of Resonant Biosensors

    International Nuclear Information System (INIS)

    Al-Shibaany, Zeyad Yousif Abdoon; Hedley, John; Huo, Dehong; Hu, Zhongxu

    2014-01-01

    Lithium niobate material is widely used in MEMS application due to its piezoelectric properties. This paper presents the micromachining process of lithium niobate to rapid prototype a resonant biosensor design. A high precision CNC machine was used to machine a sample of lithium niobate material at 5 different spindle speeds to find out the best conditions to machine this brittle material. A qualitative visual check of the surface was performed by using scanning electron microscopy, surface roughness was quantitatively investigated using an optical surface profiler and Raman spectroscopy to check the strain of the surface. Results show that the surface quality of the lithium niobate was significantly affected by the spindle speed with optimum conditions at 70k rpm giving a strained surface with 500 nm rms roughness

  5. Recent Achievements on Photovoltaic Optoelectronic Tweezers Based on Lithium Niobate

    Directory of Open Access Journals (Sweden)

    Angel García-Cabañes

    2018-01-01

    Full Text Available This review presents an up-dated summary of the fundamentals and applications of optoelectronic photovoltaic tweezers for trapping and manipulation of nano-objects on the surface of lithium niobate crystals. It extends the contents of previous reviews to cover new topics and developments which have emerged in recent years and are marking the trends for future research. Regarding the theoretical description of photovoltaic tweezers, detailed simulations of the electrophoretic and dielectrophoretic forces acting on different crystal configurations are discussed in relation to the structure of the obtained trapping patterns. As for the experimental work, we will pay attention to the manipulation and patterning of micro-and nanoparticles that has experimented an outstanding progress and relevant applications have been reported. An additional focus is now laid on recent work about micro-droplets, which is a central topic in microfluidics and optofluidics. New developments in biology and biomedicine also constitute a relevant part of the review. Finally, some topics partially related with photovoltaic tweezers and a discussion on future prospects and challenges are included.

  6. Conoscopic interferometry for probing electro-optic coefficients of strontium calcium barium niobate crystal

    Science.gov (United States)

    Wang, Ankai; Gao, CH. Y.; Xu, J. Q.; Zhang, H. J.; Sun, Sh. Q.

    2011-07-01

    The relation between the linear electro-optic effect and conoscopic interference has been investigated in a biased electro-optic crystal strontium calcium barium niobate (CSBN). Based on the change of interference patterns with applied field, an interferometric method for probing electro-optic coefficients of electro-optic crystals has been proposed. In our case, the linear electro-optic coefficients of CSBN:50 was first probed at γ33=(141.0±0.5)×10 -12 m/V and γ13=(85.0±0.5)×10 -12 m/V.

  7. Periodic domain inversion in x-cut single-crystal lithium niobate thin film

    International Nuclear Information System (INIS)

    Mackwitz, P.; Rüsing, M.; Berth, G.; Zrenner, A.; Widhalm, A.; Müller, K.

    2016-01-01

    We report the fabrication of periodically poled domain patterns in x-cut lithium niobate thin-film. Here, thin films on insulator have drawn particular attention due to their intrinsic waveguiding properties offering high mode confinement and smaller devices compared to in-diffused waveguides in bulk material. In contrast to z-cut thin film lithium niobate, the x-cut geometry does not require back electrodes for poling. Further, the x-cut geometry grants direct access to the largest nonlinear and electro-optical tensor element, which overall promises smaller devices. The domain inversion was realized via electric field poling utilizing deposited aluminum top electrodes on a stack of LN thin film/SiO 2 layer/Bulk LN, which were patterned by optical lithography. The periodic domain inversion was verified by non-invasive confocal second harmonic microscopy. Our results show domain patterns in accordance to the electrode mask layout. The second harmonic signatures can be interpreted in terms of spatially, overlapping domain filaments which start their growth on the +z side.

  8. Stability of lithium niobate on irradiation at elevated temperature

    International Nuclear Information System (INIS)

    Primak, W.; Gavin, A.P.; Anderson, T.T.; Monahan, E.

    1977-01-01

    In contrast to results obtained for neutron irradiation in a thermal reactor near room temperature, lithium niobate plates irradiated in the Experimental Breeder Reactor II (EBR-II) did not become metamict. This is attributed to the elevated temperature of the EBR-II. Ion bombardment experiments indicate that to avoid disordering of lithium niobate on irradiation, its temperature should be maintained above 673 K. Evidence for ionic conductivity was found at 873 K, indicating that it would be inadvisable to permit the temperature to rise that high, particularly with voltage across the plate. In reactor application as a microphone transducer, it is tentatively recommended that the lithium niobate be maintained in the middle of this temperature range for a major portion of reactor operating time

  9. Zr doping on lithium niobate crystals: Raman spectroscopy and chemometrics

    Science.gov (United States)

    Kokanyan, Ninel; Chapron, David; Kokanyan, Edvard; Fontana, Marc D.

    2017-03-01

    Raman measurements were investigated on Zr-doped lithium niobate LiNbO3 crystals with different concentrations. Spectra were treated by fitting procedure and principal component analysis which both provide results consistent with each other. The concentration dependence of the frequency on the main low-frequency optical phonons provides an insight of site incorporation of Zr ions in the host lattice. The threshold concentration of about 2% is evidenced, confirming the interest of Zr doping as an alternative to Mg doping for the reduction of the optical damage in lithium niobate.

  10. Utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information

    Science.gov (United States)

    2009-04-28

    A study was conducted to explore the utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information, such as electronic charts and moving map displays. The goal of this research is to support t...

  11. Utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information

    Science.gov (United States)

    2009-01-01

    This report describes a study conducted to explore the utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information. The study gathered data from a large number of pilots who conduct all type...

  12. Survey of symbology for aeronautical charts and electronic displays : navigation aids, airports, lines, and linear patterns

    Science.gov (United States)

    2008-09-01

    This industry survey documents the symbols for navigation aids, airports, lines, and linear patterns currently in use by avionics manufactureres and chart providers for depicting aeronautical charting information. Nine avionics display manufacturers ...

  13. Probing the pseudo-1-D ion diffusion in lithium titanium niobate anode for Li-ion battery.

    Science.gov (United States)

    Das, Suman; Dutta, Dipak; Araujo, Rafael B; Chakraborty, Sudip; Ahuja, Rajeev; Bhattacharyya, Aninda J

    2016-08-10

    Comprehensive understanding of the charge transport mechanism in the intrinsic structure of an electrode material is essential in accounting for its electrochemical performance. We present here systematic experimental and theoretical investigations of Li(+)-ion diffusion in a novel layered material, viz. lithium titanium niobate. Lithium titanium niobate (exact composition Li0.55K0.45TiNbO5·1.06H2O) is obtained from sol-gel synthesized potassium titanium niobate (KTiNbO5) by an ion-exchange method. The Li(+)-ions are inserted and de-inserted preferentially into the galleries between the octahedral layers formed by edge and corner sharing TiO6 and NbO6 octahedral units and the effective chemical diffusion coefficient, is estimated to be 3.8 × 10(-11) cm(2) s(-1) using the galvanostatic intermittent titration technique (GITT). Calculations based on density functional theory (DFT) strongly confirm the anisotropic Li(+)-ion diffusion in the interlayer galleries and that Li(+)-ions predominantly diffuse along the crystallographic b-direction. The preferential Li(+)-ion diffusion along the b-direction is assisted by line-defects, which are observed to be higher in concentration along the b-direction compared to the a- and c-directions, as revealed by high resolution electron microscopy. The Li-Ti niobate can be cycled to low voltages (≈0.2 V) and show stable and satisfactory battery performance over 100 cycles. Due to the possibility of cycling to low voltages, cyclic voltammetry and X-ray photoelectron spectroscopy convincingly reveal the reversibility of Ti(3+) ↔ Ti(2+) along with Ti(4+) ↔ Ti(3+) and Nb(5+) ↔ Nb(4+).

  14. The laser conoscopy of lithium niobate crystals of different composition

    Science.gov (United States)

    Pikoul, O. Y.; Sidorov, N. V.; Teplyakova, N. A.; Palatnikov, M. N.

    2016-11-01

    In this paper we study conoscopic patterns of single crystals of LiNbO3 congruent (Li/Nb = 0.946) and stoichiometric (Li/Nb = 1) compounds, as well as congruent crystals doped with cations: Mg2+ (0.86 wt.%), Zn2+ (0.03, 0.52, 0.62 wt.%), Cu2 + (0.015 wt.%), B3+ (0.12 wt.%), Gd3+ (0.51 wt.%), Y3+ (0.46 wt.%), Gd3+ (0.23 wt.%): Mg2+ (0.75 wt.%), Mg2+ (0.86 wt.%): Fe3+ (0.0036 wt.%), Ta5+ (1.13 wt.%): Mg2+ (0.011 wt.%), Y3+ (0.24 wt.%): Mg2+ (0.63 wt.%). Conoscopic patterns of lithium niobate crystals were recorded at excitation by He-Ne laser (λo = 632.8 nm) and the second harmonic of MLL-100 laser Y:Al garnet (λo = 532 nm, P = 1mW), which does not cause the effect of photorefractive and more powerful radiation of the second harmonic MLL-100 laser Y: Al garnet (λo = 532 nm, P = 90 mW). Irradiation of crystals radiation 632.8 nm and 532 nm (P = 1 mW) photorefractive effect is absent and there is no disclosure of the photoinduced light scattering indicatrix. In this case, conoscopic paintings reflect the state of structural defects in the crystal in the absence of photorefractive effect. When excited by MLL-100 laser radiation on Y:Al garnet (λo = 532 nm, P = 90 mW) in conoscopic patterns appear as its own crystal defects (defined composition and crystal growth conditions), and defects, induced by laser radiation. These crystals characterized by rather a low photorefractive effect. In crystals with a low effect of photorefractive optical distortions associated with the passage of laser light through the crystal is not "smeared" the strong destruction of the laser beam due to photorefractive effect, and confidently observable.

  15. Acid Diffusion Length in Line-and-Space Resist Patterns Fabricated by Extreme Ultraviolet Lithography

    Science.gov (United States)

    Kozawa, Takahiro; Santillan, Julius Joseph; Itani, Toshiro

    2013-07-01

    Acids generated upon exposure to radiation induce the polarity change of the polymer through catalytic chain reactions in chemically amplified resists. With the reduction of feature size, the acid diffusion length increasingly becomes an important issue. In this study, we investigated the acid diffusion length in line-and-space patterns fabricated using a small field exposure tool for extreme ultraviolet (EUV) lithography and the EIDEC standard resist to clarify the acid diffusion length in a state-of-the-art resist. The acid diffusion length depended on the nominal line width and exposure dose. Upon exposure to EUV radiation with an exposure dose of 16 mJ cm-2, the acid diffusion length (three-dimensional) in a line-and-space pattern with 21 nm nominal line width was 9.5 nm.

  16. Efficient formation of extended line intensity patterns using matched-filtering generalized phase contrast

    DEFF Research Database (Denmark)

    Bañas, Andrew Rafael; Palima, Darwin; Aabo, Thomas

    2013-01-01

    We demonstrate the efficient generation of line patterns using matched-filtering Generalized Phase Contrast (mGPC). So far, the main emphasis of mGPC light addressing has been on the creation of rapidly reconfigurable focused spots. This has recently been extended to encoding extended line patter...... for structured light applications and advanced microscopy. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only....

  17. Optical waveguides in lithium niobate: Recent developments and applications

    Energy Technology Data Exchange (ETDEWEB)

    Bazzan, Marco, E-mail: marco.bazzan@unipd.it; Sada, Cinzia, E-mail: cinzia.sada@unipd.it [Dipartimento di Fisica e Astronomia “G. Galilei,” Università di Padova, Via Marzolo 8, 35131 Padova (Italy)

    2015-12-15

    The state of the art of optical waveguide fabrication in lithium niobate is reviewed, with particular emphasis on new technologies and recent applications. The attention is mainly devoted to recently developed fabrication methods, such as femtosecond laser writing, ion implantation, and smart cut waveguides as well as to the realization of waveguides with tailored functionalities, such as photorefractive or domain engineered structures. More exotic systems, such as reconfigurable and photorefractive soliton waveguides, are also considered. Classical techniques, such as Ti in-diffusion and proton exchange, are cited and briefly reviewed as a reference standpoint to highlight the recent developments. In all cases, the application-oriented point of view is preferred, in order to provide the reader with an up-to date panorama of the vast possibilities offered by lithium niobate to integrated photonics.

  18. Photorefractive effect at 775 nm in doped lithium niobate crystals

    Energy Technology Data Exchange (ETDEWEB)

    Nava, G.; Minzioni, P.; Cristiani, I.; Degiorgio, V. [Department of Electrical, Computer, and Biomedical Engineering, and CNISM, University of Pavia, 27100 Pavia (Italy); Argiolas, N.; Bazzan, M.; Ciampolillo, M. V.; Pozza, G.; Sada, C. [Physics and Astronomy Departement, University of Padova, 35131 Padova (Italy)

    2013-07-15

    The photorefractive effect induced by 775-nm laser light on doped lithium niobate crystals is investigated by the direct observation in the far field of the transmitted-beam distortion as a function of time. Measurements performed at various Zr-doping concentrations and different light intensities show that the 775-nm light beam induces a steady-state photorefractive effect comparable to that of 532-nm light, but the observed build-up time of the photovoltaic field is longer by three-orders of magnitude. The 775-nm photorefractivity of lithium niobate crystals doped with 3 mol. % ZrO{sub 2} or with 5.5 mol. % MgO is found to be negligible.

  19. Erbium ion implantation into different crystallographic cuts of lithium niobate

    Czech Academy of Sciences Publication Activity Database

    Nekvindová, P.; Švecová, B.; Cajzl, J.; Macková, Anna; Malinský, Petr; Oswald, Jiří; Kolitsch, A.; Špirková, J.

    2012-01-01

    Roč. 34, č. 4 (2012), s. 652-659 ISSN 0925-3467 R&D Projects: GA MŠk(CZ) LC06041; GA ČR GA106/09/0125; GA ČR(CZ) GAP106/10/1477 Institutional research plan: CEZ:AV0Z10480505; CEZ:AV0Z10100521 Keywords : Lithium niobate * Erbium * Ion implantation * Luminescence Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.918, year: 2012

  20. Er+ medium energy ion implantation into lithium niobate

    Czech Academy of Sciences Publication Activity Database

    Švecová, B.; Nekvindová, P.; Macková, Anna; Oswald, Jiří; Vacík, Jiří; Grotzschel, R.; Spirkova, J.

    2009-01-01

    Roč. 267, 8-9 (2009), s. 1332-1335 ISSN 0168-583X R&D Projects: GA MŠk(CZ) LC06041; GA AV ČR IAA200480702 Institutional research plan: CEZ:AV0Z10480505; CEZ:AV0Z10100521 Keywords : lithium niobate * erbium * ion implantation Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.156, year: 2009

  1. T-DNA integration patterns in transgenic maize lines mediated by ...

    African Journals Online (AJOL)

    To explore transfer deoxyribonucleic acid (T-DNA) integration patterns in the maize genome, we improved the protocol of thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR), and amplified the flanking sequences around T-DNA integration sites from 70 independent transgenic maize lines mediated by ...

  2. Changes in Chromosome Counts and Patterns in CHO Cell Lines upon Generation of Recombinant Cell Lines and Subcloning.

    Science.gov (United States)

    Vcelar, Sabine; Melcher, Michael; Auer, Norbert; Hrdina, Astrid; Puklowski, Anja; Leisch, Friedrich; Jadhav, Vaibhav; Wenger, Till; Baumann, Martina; Borth, Nicole

    2018-03-01

    Chinese hamster ovary (CHO) cells are the number one production system for therapeutic proteins. A pre-requirement for their use in industrial production of biopharmaceuticals is to be clonal, thus originating from a single cell in order to be phenotypically and genomically identical. In the present study it was evaluated whether standard procedures, such as the generation of a recombinant cell line in combination with selection for a specific and stable phenotype (expression of the recombinant product) or subcloning have any impact on karyotype stability or homogeneity in CHO cells. Analyses used were the distribution of chromosome counts per cell as well as chromosome painting to identify specific karyotype patterns within a population. Results indicate that subclones both of the host and the recombinant cell line are of comparable heterogeneity and (in)stability as the original pool. In contrast, the rigorous selection for a stably expressing phenotype generated cell lines with fewer variation and more stable karyotypes, both at the level of the sorted pool and derivative subclones. We conclude that the process of subcloning itself does not contribute to an improved karyotypic homogeneity of a population, while the selection for a specific cell property inherently can provide evolutionary pressure that may lead to improved chromosomal stability as well as to a more homogenous population. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Ferroelectric domain inversion and its stability in lithium niobate thin film on insulator with different thicknesses

    Energy Technology Data Exchange (ETDEWEB)

    Shao, Guang-hao; Bai, Yu-hang; Cui, Guo-xin; Li, Chen; Qiu, Xiang-biao; Wu, Di; Lu, Yan-qing, E-mail: yqlu@nju.edu.cn [National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China); Geng, De-qiang [Jinan Jingzheng Electronics Co., Ltd., Jinan 250100 (China)

    2016-07-15

    Ferroelectric domain inversion and its effect on the stability of lithium niobate thin films on insulator (LNOI) are experimentally characterized. Two sets of specimens with different thicknesses varying from submicron to microns are selected. For micron thick samples (∼28 μm), domain structures are achieved by pulsed electric field poling with electrodes patterned via photolithography. No domain structure deterioration has been observed for a month as inspected using polarizing optical microscopy and etching. As for submicron (540 nm) films, large-area domain inversion is realized by scanning a biased conductive tip in a piezoelectric force microscope. A graphic processing method is taken to evaluate the domain retention. A domain life time of 25.0 h is obtained and possible mechanisms are discussed. Our study gives a direct reference for domain structure-related applications of LNOI, including guiding wave nonlinear frequency conversion, nonlinear wavefront tailoring, electro-optic modulation, and piezoelectric devices.

  4. XRAYL: a program for producing idealized powder diffraction line profiles from overlapped powder patterns

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, C.R.; Morosin, B. [Sandia National Labs., Albuquerque, NM (United States); Stewart, J.M. [Maryland Univ., College Park, MD (United States)

    1996-09-01

    The X-ray diffraction patterns of samples of polycrystalline materials are used to identify and characterize phases. Very often the total (or composite) profile consists of a series of overlapping profiles. In many applications it is necessary to separate the component profiles from the total profile. (In this document the terms {ital profile, line}, and {ital peak} are used interchangeably to represent these features of X-ray or neutron diffraction patterns.) A computer program, XRAYL, first developed in the 1980s and subsequently enlarged and improved, allows the fitting of analytical functions to powder diffraction lines. The fitting process produces parameters of chosen profile functions, diffraction line by diffraction line. The resulting function parameters may then be used to generate ``idealized`` powder diffraction lines as counts at steps in 2{Omega}. The generated lines are effectively free of statistical noise and contributions from overlapping lines. Each separated line extends to background on both sides of the generated profile. XRAYL may, therefore, be used in X-ray powder diffraction profile analysis as a preprocessor program that is, separating peaks and feeding the ``resolved`` data to subsequent analysis programs. This self- contained document includes: (1) a description of the fitting functions coded into XRAYL, (2) an outline of the least-squares algorithm used in fitting the profile function, (3) the file formats and contents utilized by the computer code, (4) the user options and their presentation requirements for execution of the program, (5) an example of input and output for a test case, and (6) source code listings on a diskette.

  5. Quasicontinuum simulations of geometric effect on onset plasticity of nano-scale patterned lines

    Science.gov (United States)

    Jin, Jianfeng; Cao, Jingyi; Zhou, Siyuan; Yang, Peijun; Guo, Zhengxiao

    2017-09-01

    Onset plasticity of metallic nano-lines or nano-beams is of considerable scientific and technological interest in micro-/nano- mechanics and interconnects of patterned lines in electronic devices, where capability of resistance to deformation is important. In this study, a multiscale quasicontinuum (QC) method was used to explore such an issue in a nano-scale copper (Cu) line protruding from a relatively large single crystal Cu substrate during compression. The results show that the yield stress of a rectangular beam on the substrate can be greatly reduced compared with that of a flat surface of the same area. For the rectangular line, the aspect ratio (width/height) affects dislocation morphology at the onset plasticity without much change of yield stress. However, for the trapezoidal line, the yield stress decreases with the base angle (α), especially when the α is over 54.7°. As the sidewall orientation changes from at α = 0°, then to at α = 54.7° and finally to at α = 90°, a higher surface energy could enable easier dislocation formation and lower yield stress. Meanwhile, it is found that the interaction between the line and the support substrate also shows a great effect on yield stress. Moreover, although it is possible to open two extra dislocation slip planes inside from the two bottom corners of the Cu line with the α over 54.7°, dislocation nucleation derived from them is only observed at α = 90°.

  6. Phases, line tension and pattern formation in molecularly thin films at the air-water interface

    Science.gov (United States)

    Mandal, Pritam

    A Langmuir film, which is a molecularly thin insoluble film on a liquid substrate, is one practical realization of a quasi-two dimensional matter. The major advantages of this system for the study of phase separation and phase co-existence are (a) it allows accurate control of the components and molecular area of the film and (b) it can be studied by various methods that require very flat films. Phase separation in molecularly thin films plays an important role in a range of systems from biomembranes to biosensors. For example, phase-separated lipid nano-domains in biomembranes are thought to play crucial roles in membrane function. I use Brewster Angel Microscopy (BAM) coupled with Fluorescence Microscopy (FM) and static Light Scattering Microscopy (LSM) to image phases and patterns within Langmuir films. The three microscopic techniques --- BAM, FM and LSM --- are complimentary to each other, providing distinct sets of information. They allow direct comparison with literature results in lipid systems. I have quantitatively validated the use of detailed hydrodynamic simulations to determine line tension in monolayers. Line tension decreases as temperature rises. This decrease gives us information on the entropy associated with the line, and thus about line structure. I carefully consider the thermodynamics of line energy and entropy to make this connection. In the longer run, LSM will be exploited to give us further information about line structure. I have also extended the technique by testing it on domains within the curved surface of a bilayer vesicle. I also note that in the same way that the presence of surface-active agents, known as surfactants, affects surface energy, the addiction of line active agents alters the inter-phase line energy. Thus my results set to stage to systematically study the influence of line active agents ---'linactants' --- on the inter-phase line energy. Hierarchal self-assembled chiral patterns were observed as a function of

  7. RIE challenges for sub-15 nm line-and-space patterning using directed self-assembly lithography with coordinated line epitaxy (COOL) process

    Science.gov (United States)

    Kasahara, Y.; Seino, Y.; Kobayashi, K.; Kanai, H.; Sato, H.; Kubota, H.; Tobana, T.; Minegishi, S.; Miyagi, K.; Kihara, N.; Kodera, K.; Shiraishi, M.; Kawamonzen, Y.; Nomura, S.; Azuma, T.

    2015-03-01

    Directed self-assembly (DSA) is one of the promising candidates for next-generation lithography. We developed a novel simple sub-15 nm line-and-space (L/S) patterning process, the "coordinated line epitaxy (COOL) process," using grapho- and chemo-hybrid epitaxy. In this study we evaluate the DSA L/S pattern transfer margin. Since defect reduction is difficult in the case of the DSA pattern transfer process, there is a need to increase the pattern transfer margin. We also describe process integration for electrical yield verification.

  8. Expression pattern of matrix metalloproteinases in human gynecological cancer cell lines

    International Nuclear Information System (INIS)

    Schröpfer, Andrea; Kammerer, Ulrike; Kapp, Michaela; Dietl, Johannes; Feix, Sonja; Anacker, Jelena

    2010-01-01

    Matrix metalloproteinases (MMPs) are involved in the degradation of protein components of the extracellular matrix and thus play an important role in tumor invasion and metastasis. Their expression is related to the progression of gynecological cancers (e.g. endometrial, cervical or ovarian carcinoma). In this study we investigated the expression pattern of the 23 MMPs, currently known in humans, in different gynecological cancer cell lines. In total, cell lines from three endometrium carcinomas (Ishikawa, HEC-1-A, AN3 CA), three cervical carcinomas (HeLa, Caski, SiHa), three chorioncarcinomas (JEG, JAR, BeWo), two ovarian cancers (BG-1, OAW-42) and one teratocarcinoma (PA-1) were examined. The expression of MMPs was analyzed by RT-PCR, Western blot and gelatin zymography. We demonstrated that the cell lines examined can constitutively express a wide variety of MMPs on mRNA and protein level. While MMP-2, -11, -14 and -24 were widely expressed, no expression was seen for MMP-12, -16, -20, -25, -26, -27 in any of the cell lines. A broad range of 16 MMPs could be found in the PA1 cells and thus this cell line could be used as a positive control for general MMP experiments. While the three cervical cancer cell lines expressed 10-14 different MMPs, the median expression in endometrial and choriocarcinoma cells was 7 different enzymes. The two investigated ovarian cancer cell lines showed a distinctive difference in the number of expressed MMPs (2 vs. 10). Ishikawa, Caski, OAW-42 and BeWo cell lines could be the best choice for all future experiments on MMP regulation and their role in endometrial, cervical, ovarian or choriocarcinoma development, whereas the teratocarcinoma cell line PA1 could be used as a positive control for general MMP experiments

  9. Contrasted patterns of evolution of the LINE-1 retrotransposon in perissodactyls: the history of a LINE-1 extinction.

    Science.gov (United States)

    Sookdeo, Akash; Hepp, Crystal M; Boissinot, Stéphane

    2018-01-01

    LINE-1 (L1) is the dominant autonomously replicating non-LTR retrotransposon in mammals. Although our knowledge of L1 evolution across the tree of life has considerably improved in recent years, what we know of L1 evolution in mammals is biased and comes mostly from studies in primates (mostly human) and rodents (mostly mouse). It is unclear if patterns of evolution that are shared between those two groups apply to other mammalian orders. Here we performed a detailed study on the evolution of L1 in perissodactyls by making use of the complete genome of the domestic horse and of the white rhinoceros. This mammalian order offers an excellent model to study the extinction of L1 since the rhinoceros is one of the few mammalian species to have lost active L1. We found that multiple L1 lineages, carrying different 5'UTRs, have been simultaneously active during the evolution of perissodactyls. We also found that L1 has continuously amplified and diversified in horse. In rhinoceros, L1 was very prolific early on. Two successful families were simultaneously active until ~20my ago but became extinct suddenly at exactly the same time. The general pattern of L1 evolution in perissodactyls is very similar to what was previously described in mouse and human, suggesting some commonalities in the way mammalian genomes interact with L1. We confirmed the extinction of L1 in rhinoceros and we discuss several possible mechanisms.

  10. Correlation of antinuclear antibody immunofluorescence patterns with immune profile using line immunoassay in the Indian scenario

    Directory of Open Access Journals (Sweden)

    Sebastian Wendy

    2010-07-01

    Full Text Available Background: Immunity status, individual response to disease and types of antibodies produced are well known to vary from person to person, place to place and probably from population to population. A broad spectrum of specific auto antibodies that have so far been associated with specific rheumatic diseases, as noted in Western literature, has been well taken as a reference standard all over the world. There is neither research work nor any data correlating the auto antibodies and their antinuclear antibody (ANA patterns with the immunoprofile in the Indian population to date. Aims: To understand a definite association between ANA patterns and specific antibodies in the serum in the Indian study population and to document similarities / differences with the West. Settings and Design: This prospective and retrospective double blind study was undertaken on the South Indian population referred for ANA testing by Indirect Immunofluorescence method and by immunoline methods. Materials and Methods: Serum samples of patients from a random South Indian population who sought medical help for rheumatic disease were subjected for ANA testing by indirect immunofluorescence (IIF method and line immunoassay during the study period of 27 months. Serum samples were processed in dilution of 1:100 using HEp - 2010 / liver biochip (Monkey (EUROIMMUN AG. The serum samples which were further processed for line immunoassay were treated in 1:100 dilution on nylon strips coated with recombinant and purified antigens as discrete lines with plastic backing (EUROIMMUN AG coated with antigens nRNP / Sm, Sm, SSA, Ro-52, SSB, Scl-70, PM-Scl, PCNA, Jo-1, CENP-B, dsDNA, nucleosomes, histones, ribosomal protein-P, anti-mitochondrial antibodies (AMA-M2 along with a control band. The analysis was done by comparing the intensity of the reaction with positive control line by image analysis. Results: The antinuclear antibody indirect immunofluorescence (ANA - IIF patterns obtained

  11. Effect of Flow on Cultured Cell at Micro-Pattern of Ridge Lines

    Directory of Open Access Journals (Sweden)

    Haruka Hino

    2017-10-01

    Full Text Available A flow channel with a micro-pattern of ridge lines of a scaffold has been designed to study quantitatively the effect of flow on an oriented cell in vitro. The lines of parallel micro ridges (0.001 mm height, 0.003 mm width, and 0.003 mm interval are made by the lithography technique on the lower surface of the channel as the scaffold to make orientation of each cell. Variation is made about the angle between the longitudinal direction of the ridge line and the direction of the flow: zero, 0.79 and 1.6 rad. The suspension of C2C12 (mouse myoblast cell line was injected to the channel, and incubated for two hours on the micro ridges before the flow test for four hours. The flow rate of 3/hour is controlled by a syringe pump to make variation of the wall shear stress of < 3 Pa. The action of each cell adhered on the micro pattern was analyzed at the time lapse images. The experimental results show that both the migration and the deformation of each myoblast along the micro ridge are restricted by the wall shear stress higher than 3 Pa.

  12. Contrast of HOLZ lines in energy-filtered convergent-beam electron diffraction patterns from silicon

    International Nuclear Information System (INIS)

    Lehmpfuhl, G.; Krahl, D.; Uchida, Y.

    1995-01-01

    Higher-order Laue-zone (HOLZ) lines were investigated in convergent-beam electron diffraction patterns from silicon near the low-indexed zone axes [100], [110] and [111]. The visibility of these lines depends on the effective structure potentials of the reflections from the first Laue zone depending on their Debye-Waller factor. The contrast of the HOLZ lines is strongly reduced by inelastically scattered electrons. They can be excluded by an imaging Ω filter for energy losses above 2 eV. The diffraction patterns were compared with many-beam calculations. Without absorption, an excellent agreement could be achieved for the [111] and [100] zone axes, while the simulation of the [110] zone-axis pattern needed a calculation with absorption. The reason for this observation is explained in the Bloch-wave picture. Calculations with absorption, however, lead to artefacts in the intensity distribution of the [100] HOLZ pattern. In order to obtain agreement with the experiment, the Debye-Waller factor had to be modified in different ways for the different zone axes. This corresponds to a strong anisotropy of the Debye-Waller factor. To confirm this observation, the temperature dependence of the itensity distributions of the HOLZ patterns was investigated between 50 and 680 K. At room temperature, the parameter D in the Debye-Waller factor exp(-Ds 2 ) was determined as 0.13, 0.26 and 0.55 A 2 for the zone axes [100], [111] and [110], respectively. The reliability of the conclusions is discussed. (orig.)

  13. A way to integrate multiple block layers for middle of line contact patterning

    Science.gov (United States)

    Kunnen, E.; Demuynck, S.; Brouri, M.; Boemmels, J.; Versluijs, J.; Ryckaert, J.

    2015-03-01

    It is clear today that further scaling towards smaller dimensions and pitches requires a multitude of additional process steps. Within this work we look for solutions to achieve a middle of line 193i based patterning scheme for N7 logic at a contacted poly pitch of 40-45 nm. At these pitches, trenches can still be printed by means of double patterning. However, they need to be blocked at certain positions because of a limited line end control below 90 nm pitch single print. Based on the 193i patterning abilities, the proposed SRAM (Static Random Access Memory) cell requires 5 blocking layers. Integrating 5 blocking layers is a new challenge since down to N10 one blocking layer was usually sufficient. The difficulty with multiple blocking layers is the removal of the masked parts, especially in cases of overlap. As a solution a novel patterning approach is proposed and tried out on relaxed dimensions (patent pending). The proposed solution is expected not to be sensitive to the number of blocking layers used, and tolerates their overlap. The stack is constructed to be compatible with N7 substrates such as SiGe or P:Si. Experimental results of the stack blocking performance on relaxed pitch will be presented and discussed.

  14. Properties and applications of potassium lithium tantalate niobate

    Science.gov (United States)

    Tong, Xiaolin

    1998-06-01

    This thesis describes the physical and photorefractive properties of potassium lithium tantalate niobate (KLTN) single crystal material. The top seeded solution growth method is reviewed. The phase transition temperatures and dielectric properties are related to the compositions of the KLTN crystals. A liquid/solid interface dynamics model is introduced to explain the experimental results which is that hydrogen ion concentration in KLTN crystals can be reduced dramatically by doping copper in the absence of titanium. Dark conductivity of KLTN crystals are contributed by two species when the temperature is in the range of 250 K and 350 K. Two species are hydrogen ions and shallow trapped electrons (holes). These results have been confirmed by direct dc conductivity measurements and holograms fixing experiments. Hydrogen ion has two types of motion in the crystals: O-H vibration and O-H libration. We established a model to describe hydrogen ions motions and hopping in KLTN crystals. The theoretical prediction is in agreement with experimental results. Hologram thermal fixing for optical data storage is discussed. Hydrogen ions are identified as the mobile ion which is responsible for thermal fixing. In ferroelectric phase KLTN crystals, spontaneous polarization of individual microdomains can be aligned throughout the entire crystal by the poling process. Photorefractive space charge fields play a role deploing the microdomains wherever space charge field opposing to spontaneous polarization. This may cause microdomain switching and lead to the generation of index grating. Experimental observation of Barkhausen current jumps is the signature of domain inversion. Holograms thermal fixing in potassium niobate crystals are also investigated. Because potassium niobate crystal has an orthognal structure with space group mm2, 3D polarization dependence of OH bands are observed. A special cut of iron doped potassium niobate crystal was designed to achieve the maximum

  15. Computer Modelling of Hafnium Doping in Lithium Niobate

    Directory of Open Access Journals (Sweden)

    Romel M. Araujo

    2018-03-01

    Full Text Available Lithium niobate (LiNbO3 is an important technological material with good electro-optic, acousto-optic, elasto-optic, piezoelectric and nonlinear properties. Doping LiNbO3 with hafnium (Hf has been shown to improve the resistance of the material to optical damage. Computer modelling provides a useful means of determining the properties of doped and undoped LiNbO3, including its defect chemistry, and the effect of doping on the structure. In this paper, Hf-doped LiNbO3 has been modelled, and the final defect configurations are found to be consistent with experimental results.

  16. Spectral evolution of Eu{sup 3+} doped Y{sub 3}NbO{sub 7} niobate induced by temperature

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K-Y.; Durand, A. [CNRS, ICMCB, UPR 9048, F-33600 Pessac (France); Univ. Bordeaux, ICMCB, UPR 9048, F-33600 Pessac (France); Heintz, J-M.; Veillere, A. [CNRS, ICMCB, UPR 9048, F-33600 Pessac (France); Univ. Bordeaux, ICMCB, UPR 9048, F-33600 Pessac (France); Bordeaux INP, ICMCB, UPR 9048, F-33600 Pessac (France); Jubera, V., E-mail: veronique.jubera@u-bordeaux.fr [CNRS, ICMCB, UPR 9048, F-33600 Pessac (France); Univ. Bordeaux, ICMCB, UPR 9048, F-33600 Pessac (France)

    2016-03-15

    A Eu{sup 3+} doped Y{sub 3}NbO{sub 7} niobate powder was synthetized using a polymerizable complex route. It gave rise to nanometric particles that crystallized in the fluorine structure, corresponding to the Y{sub 3}NbO{sub 7} phase. The thermal evolution of this powder was followed up to 1600 °C, using X-ray diffraction and optical characterizations. The fluorine structure was maintained in the whole temperature range. However, spectral evolution of the samples calcined above 900 °C showed a more complex situation. Emission spectra of powders heat treated at different temperatures showed an evolution of the emission lines that can be attributed first to a better crystallization of the niobate phase and second to its partial decomposition in favor of the formation of YNbO{sub 4} and Y{sub 2}O{sub 3}. Although the Y{sub 3}NbO{sub 7} phase appeared stable up to 1650 °C, from X-ray diffraction analysis, spectral analysis showed that the local environment of the doping element is modified from 1100 °C. - Graphical abstract: Spectral evolution of Eu{sup 3+} doped Y{sub 3}NbO{sub 7} niobate induced by temperature.

  17. Absorption and reflectivity of the lithium niobate surface masked with a graphene layer

    Directory of Open Access Journals (Sweden)

    O. Salas

    2017-01-01

    Full Text Available We performed simulations of the interaction of a graphene layer with the surface of lithium niobate utilizing density functional theory and molecular dynamics at 300K and atmospheric pressure. We found that the graphene layer is physisorbed on the lithium niobate surface with an adsorption energy of -0.8205 eV/(carbon-atom. Subsequently, the energy band structure, the optical absorption and reflectivity of the new system were calculated. We found important changes in these physical properties with respect to the corresponding ones of a graphene layer and of a lithium niobate crystal.

  18. A compact metamaterial structure with dual-planar meander line (DML) patterns

    Science.gov (United States)

    Xu, Xiaofei; Wang, Yefang; Wei, Juzheng

    2018-03-01

    A compact metamaterial element structure is proposed which is characterized with dual-planar meander line (DML) patterns. Compared with existing single planar solutions, the new design is with an extremely reduced resonance frequency. Good agreement is observed between the simulated and measured results. To strengthen the compacting effect, the effective material properties are further retrieved and compared. By calculating the ratio of resonator size to resonating wavelength, the proposed DML design is featured with a deep subwavelength element size at the order of 1/30 wavelength. We remark that this compacting effect does not sacrifice the functional bandwidth of negative permittivity. The negative permittivity bandwidth for the DML design is nearly 70%, much larger than those of existing single planar structures. By utilizing more advanced fabrication technology, the DML element size can be further decreased if the meander lines are made thinner in future.

  19. Stick-Slip Motion of Moving Contact Line on Chemically Patterned Surfaces

    KAUST Repository

    Wu, Congmin

    2009-01-01

    Based on our continuum hydrodynamic model for immiscible two-phase flows at solid surfaces, the stick-slip motion has been predicted for moving contact line at chemically patterned surfaces [Wang et al., J. Fluid Mech., 605 (2008), pp. 59-78]. In this paper we show that the continuum predictions can be quantitatively verified by molecular dynamics (MD) simulations. Our MD simulations are carried out for two immiscible Lennard-Jones fluids confined by two planar solid walls in Poiseuille flow geometry. In particular, one solid surface is chemically patterned with alternating stripes. For comparison, the continuum model is numerically solved using material parameters directly measured in MD simulations. From oscillatory fluid-fluid interface to intermittent stick-slip motion of moving contact line, we have quantitative agreement between the continuum and MD results. This agreement is attributed to the accurate description down to molecular scale by the generalized Navier boundary condition in our continuum model. Numerical results are also presented for the relaxational dynamics of fluid-fluid interface, in agreement with a theoretical analysis based on the Onsager principle of minimum energy dissipation. © 2010 Global-Science Press.

  20. Rare-Earth Tantalates and Niobates Single Crystals: Promising Scintillators and Laser Materials

    Directory of Open Access Journals (Sweden)

    Renqin Dou

    2018-01-01

    Full Text Available Rare-earth tantalates, with high density and monoclinic structure, and niobates with monoclinic structure have been paid great attention as potential optical materials. In the last decade, we focused on the crystal growth technology of rare-earth tantalates and niobates and studied their luminescence and physical properties. A series of rare-earth tantalates and niobates crystals have been grown by the Czochralski method successfully. In this work, we summarize the research results on the crystal growth, scintillation, and laser properties of them, including the absorption and emission spectra, spectral parameters, energy levels structure, and so on. Most of the tantalates and niobates exhibit excellent luminescent properties, rich physical properties, and good chemical stability, indicating that they are potential outstanding scintillators and laser materials.

  1. Thin film lithium niobate microring modulators for analog photonics, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Lithium niobate (LiNbO3) has been long regarded as the most attractive material for electro-optic modulation for high-performance optical communication systems of up...

  2. Ridge Waveguide Structures in Magnesium-Doped Lithium Niobate, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In this NASA Phase I STTR effort, the feasibility of fabricating isolated ridge waveguides in 5% magnesium-doped lithium niobate (5% MgO:LN) will be established....

  3. Sequence and expression pattern of the germ line marker vasa in honey bees and stingless bees

    Directory of Open Access Journals (Sweden)

    Érica Donato Tanaka

    2009-01-01

    Full Text Available Queens and workers of social insects differ in the rates of egg laying. Using genomic information we determined the sequence of vasa, a highly conserved gene specific to the germ line of metazoans, for the honey bee and four stingless bees. The vasa sequence of social bees differed from that of other insects in two motifs. By RT-PCR we confirmed the germ line specificity of Amvasa expression in honey bees. In situ hybridization on ovarioles showed that Amvasa is expressed throughout the germarium, except for the transition zone beneath the terminal filament. A diffuse vasa signal was also seen in terminal filaments suggesting the presence of germ line cells. Oocytes showed elevated levels of Amvasa transcripts in the lower germarium and after follicles became segregated. In previtellogenic follicles, Amvasa transcription was detected in the trophocytes, which appear to supply its mRNA to the growing oocyte. A similar picture was obtained for ovarioles of the stingless bee Melipona quadrifasciata, except that Amvasa expression was higher in the oocytes of previtellogenic follicles. The social bees differ in this respect from Drosophila, the model system for insect oogenesis, suggesting that changes in the sequence and expression pattern of vasa may have occurred during social evolution.

  4. Optical homogeneity, defects, and photorefractive properties of stoichiometric, congruent, and zinc-doped lithium niobate crystals

    Science.gov (United States)

    Sidorov, N. V.; Yanichev, A. A.; Palatnikov, M. N.; Gabain, A. A.; Pikoul, O. Yu.

    2014-07-01

    Using the laser-conoscopy method, the photorefractive light-scattering method, and the Raman light-scattering method, we have studied the structural and optical homogeneities and photorefractive properties of (i) stoichiometric lithium niobate crystals (LiNbO3(stoich)), which were grown from a melt with 58.6 mol % of Li2O; (ii) congruent crystals (LiNbO3(congr)); and (iii) congruent crystals that were doped with Zn2+ cations (LiNbO3:Zn; [Zn] = 0.03-1.59 mol %). We have shown that the speckle-structure of the photorefractive light scattering in all the crystals is three-layer. The shapes of the second and third layers repeat in general the shape of the first layer. We have shown that the differences that are observed between the Raman spectra, the photorefractive light scattering, and the conoscopic patterns of the examined crystals are caused by the fact that defects are distributed inhomogeneously over the volume of these crystals and that Zn2+ cations are incorporated inhomogeneously into the lattice. This leads to the appearance of local changes in the elastic characteristics of the crystal and to the appearance of mechanical stresses, which locally change the optical indicatrix and, correspondingly, the conoscopic pattern and the Raman spectrum.

  5. Generating ultra-short energetic pulses with cascaded soliton compression in lithium niobate crystals

    DEFF Research Database (Denmark)

    Zhou, Binbin; Bache, Morten; Chong, A.

    2010-01-01

    By launching energetic femtosecond pulses in a lithium niobate crystal, the phase mismatched second-harmonic generation process compresses the 50 fs input pulse at 1250 nm to 30 fs through a soliton effect.......By launching energetic femtosecond pulses in a lithium niobate crystal, the phase mismatched second-harmonic generation process compresses the 50 fs input pulse at 1250 nm to 30 fs through a soliton effect....

  6. Integrated optics on Lithium Niobate for sensing applications

    Science.gov (United States)

    Zaltron, A.; Bettella, G.; Pozza, G.; Zamboni, R.; Ciampolillo, M.; Argiolas, N.; Sada, C.; Kroesen, S.; Esseling, M.; Denz, C.

    2015-05-01

    In micro-analytical chemistry and biology applications, optofluidic technology holds great promise for creating efficient lab-on-chip systems where higher levels of integration of different stages on the same platform is constantly addressed. Therefore, in this work the possibility of integrating opto-microfluidic functionalities in lithium niobate (LiNbO3) crystals is presented. In particular, a T-junction droplet generator is directly engraved in a LiNbO3 substrate by means of laser ablation process and optical waveguides are realized in the same material by exploiting the Titanium in-diffusion approach. The coupling of these two stages as well as the realization of holographic gratings in the same substrate will allow creating new compact optical sensor prototypes, where the optical properties of the droplets constituents can be monitored.

  7. Photorefractive lithium niobate crystals for applications in photonics

    International Nuclear Information System (INIS)

    Hartwig, U.

    2006-12-01

    Lithium niobate crystals (LiNbO 3 ) generally show a photorefractive response, i.e., light-induced refractive index changes. Crystals are investigated at room temperature and at elevated temperatures. As a result 'classical' photorefractive holographic volume-phase gratings, originating from space charge fields and the electro-optic effect, and 'non-classical' photorefractive volume-phase gratings, which can be traced back to strong absorption gratings, emerge. Single domain and periodically poled crystals (PPLN) are investigated. PPLN is typically used in non-linear optics for frequency conversion. The crystals also show non-linear photorefractive response during holographic recording with isotropically polarized light beams of equal intensity and, in the case of PPLN, by mixing of domain and holographic gratings. The results are important for applications combining the photorefractive and non-linear optical properties of LiNbO 3 . (orig.)

  8. Laser irradiation in Nd3+ doped strontium barium niobate glass

    International Nuclear Information System (INIS)

    Haro-Gonzalez, P.; Martin, I. R.; Arbelo-Jorge, E.; Gonzalez-Perez, S.; Caceres, J. M.; Nunez, P.

    2008-01-01

    A local nanocrystalline formation in a neodymium doped strontium barium niobate (SBN) glass has been obtained under argon laser irradiation. The intense emission around 880 nm, originated from the 4 F 3/2 ( 4 F 5/2 ) thermalized level when the glass structure changes to a glass ceramic structure due to the irradiation of the laser beam, has been studied. The intensities and lifetimes change from this level inside and outside the irradiated area made by the laser excitation. They have been analyzed and demonstrated that the desvitrification process has been successfully achieved. These results confirm that nanocrystals of SBN have been created by the laser action confirming that the transition from glass to glass ceramic has been completed. These results are in agreement with the emission properties of nanocrystals of the bulk glass ceramic sample. The present study also suggests that the SBN nanocrystal has a potential application as temperature detector

  9. Twinning structures in near-stoichiometric lithium niobate single crystals

    International Nuclear Information System (INIS)

    Yao, Shuhua; Chen, Yanfeng

    2010-01-01

    A near-stoichiometric lithium niobate single crystal has been grown by the Czochralski method in a hanging double crucible with a continuous powder supply system. Twins were found at one of the three characteristic growth ridges of the as-grown crystal. The twin structure was observed and analyzed by transmission synchrotron topography. The image shifts ΔX and ΔY in the transmission synchrotron topograph were calculated for the 3 anti 2 anti 12 and 0 anti 222 reflections based on results from high-resolution X-ray diffractometry. It is confirmed that one of the {01 anti 1 anti 2} m planes is the composition face of the twin and matrix crystals. The formation mechanism of these twins is discussed. (orig.)

  10. Sub-band-gap laser micromachining of lithium niobate

    DEFF Research Database (Denmark)

    Christensen, F. K.; Müllenborn, Matthias

    1995-01-01

    Laser processing of insulators and semiconductors is usually realized using photon energies exceeding the band-gap energy. This makes laser processing of insulators difficult since high photon energies typically require either a pulsed laser or a frequency-doubled continuous-wave laser. A new...... method is reported which enables us to do laser processing of lithium niobate using sub-band-gap photons. Using high scan speeds, moderate power densities, and sub-band-gap photon energies results in volume removal rates in excess of 106µm3/s. This enables fast micromachining of small piezoelectric...... structures, or simple etching of grooves for precision positioning of optical fibers. ©1995 American Institute of Physics....

  11. Study of structural differences between stoichiometric and congruent lithium niobate

    CERN Document Server

    Kling, A; Correia, J G; Da Silva, M F A; Diéguez, E; Agulló-López, F; Soares, J C

    1996-01-01

    The structural differences between stoichiometric and congruent (lithium deficient) lithium niobate single crystals were studied by RBS- and NRA-channeling as well as perturbed angular correlation (PAC) measurements. The d-PAC111Cd-PAC investigations point out that a second Li site can be detected in congruent material, while only one is present in stoichiometric. Channeling studies of different axes and the comparison of the results with computer simulations corroborated former indications that this additional lattice site can be attributed to the formation of ilmenite type stacking faults. A comparative study of the energy dependence of the dechanneling showed that a remarkable disorder is also present in the Nb sublattice of the congruent crystals and that these defects have a point-like character.

  12. Fabrication and performance of porous lithium sodium potassium niobate ceramic

    Science.gov (United States)

    Chen, Caifeng; Zhu, Yuan; Ji, Jun; Cai, Feixiang; Zhang, Youming; Zhang, Ningyi; Wang, Andong

    2018-02-01

    Porous lithium sodium potassium niobate (LNK) ceramic has excellent piezoelectric properties, chemical stability and great chemical compatibility. It has a good application potential in the field of biological bone substitute. In the paper, porous LNK ceramic was fabricated with egg albumen foaming agent by foaming method. Effects of preparation process of the porous LNK ceramic on density, phase structure, hole size and piezoelectric properties were researched and characterized. The results show that the influence factors of LNK solid content and foaming agent addition are closely relevant to properties of the porous LNK ceramic. When solid content is 65% and foaming agent addition is 30%, the porous LNK ceramic has uniform holes and the best piezoelectric properties.

  13. Patterns of HIV-1 Drug Resistance After First-Line Antiretroviral Therapy (ART) Failure in 6 Sub-Saharan African Countries: Implications for Second-Line ART Strategies

    NARCIS (Netherlands)

    Hamers, Raph L.; Sigaloff, Kim C. E.; Wensing, Annemarie M.; Wallis, Carole L.; Kityo, Cissy; Siwale, Margaret; Mandaliya, Kishor; Ive, Prudence; Botes, Mariette E.; Wellington, Maureen; Osibogun, Akin; Stevens, Wendy S.; Rinke de Wit, Tobias F.; Schuurman, Rob; Siwale, M.; Njovu, C.; Labib, M.; Menke, J.; Botes, M. E.; Conradie, F.; Ive, P.; Sanne, I.; Wallis, C. L.; Letsoalo, E.; Stevens, W. S.; Hardman, M.; Wellington, M.; Luthy, R.; Mandaliya, K.; Abdallah, S.; Jao, I.; Dolan, M.; Namayanja, G.; Nakatudde, L.; Nankya, I.; Kiconco, M.; Abwola, M.; Mugyenyi, P.; Osibogun, A.; Akanmu, S.; Schuurman, R.; Wensing, A. M.; Straatsma, E.; Wit, F. W.; Dekker, J.; van Vugt, M.; Lange, J. M.

    2012-01-01

    Background. Human immunodeficiency virus type 1 (HIV-1) drug resistance may limit the benefits of antiretroviral therapy (ART). This cohort study examined patterns of drug-resistance mutations (DRMs) in individuals with virological failure on first-line ART at 13 clinical sites in 6 African

  14. Ion irradiation effects on lithium niobate etalons for tunable spectral filters

    Science.gov (United States)

    Garranzo, D.; Ibarmia, S.; Alvarez-Herrero, A.; Olivares, J.; Crespillo, M.; Díaz, M.

    2017-11-01

    Solar Orbiter is a mission dedicated to solar and heliospheric physics. It was selected as the first mediumclass mission of ESA's Cosmic Vision 2015-2025 Programme. Solar Orbiter will be used to examine how the Sun creates and controls the heliosphere, the vast bubble of charged particles blown by the solar wind into the interstellar medium. One of the scientific payload elements of Solar Orbiter is the Polarimetric and Helioseismic Imager (PHI). The PHI instrument consists of two telescopes, a High Resolution Telescope (HRT) that will image a fraction of the solar disk at a resolution reaching {150 km at perihelion, and a Full Disk Telescope (FDT) to image the full solar disk during all phases of the orbit. PHI is a diffraction limited, wavelength tunable, quasi-monochromatic, polarisation sensitive imager. These capabilities are needed to infer the magnetic field and line-of-sight (LOS) velocity of the region targeted by the spacecraft. For the spectral analysis, PHI will use an order-sorting filter to isolate a bandpass of the order of 100 mÅ . The FilterGraph (FG) contains an etalon in single pass configuration as tunable spectral filter located inside a temperature stabilized oven. This filter will be made by means of a z-cut LiNbO3 crystal (about 300 microns thick) and multilayer coatings including a conductive one in order to apply a high voltage (up to 5 kV) and induce the required electric field to tune the filter. Solar Orbiter observing mission around the Sun will expose the PHI instrument to extreme radiation conditions, mainly dominated by solar high-energy particles released during severe solar events (protons with energies typically ranging from few keV up to several GeV) and the continuous isotropic background flux of galactic cosmic rays (heavy ions, from Z=1 to Z=92). The main concerns are whether the cumulated radiation damage can degrade the functionality of the filter or, in the worst case, the impact of a single highly ionizing particle

  15. Song pattern recognition in crickets based on a delay-line and coincidence-detector mechanism.

    Science.gov (United States)

    Hedwig, Berthold; Sarmiento-Ponce, Edith Julieta

    2017-05-31

    Acoustic communication requires filter mechanisms to process and recognize key features of the perceived signals. We analysed such a filter mechanism in field crickets ( Gryllus bimaculatus ), which communicate with species-specific repetitive patterns of sound pulses and chirps. A delay-line and coincidence-detection mechanism, in which each sound pulse has an impact on the processing of the following pulse, is implicated to underlie the recognition of the species-specific pulse pattern. Based on this concept, we hypothesized that altering the duration of a single pulse or inter-pulse interval in three-pulse chirps will lead to different behavioural responses. Phonotaxis was tested in female crickets walking on a trackball exposed to different sound paradigms. Changing the duration of either the first, second or third pulse of the chirps led to three different characteristic tuning curves. Long first pulses decreased the phonotactic response whereas phonotaxis remained strong when the third pulse was long. Chirps with three pulses of increasing duration of 5, 20 and 50 ms elicited phonotaxis, but the chirps were not attractive when played in reverse order. This demonstrates specific, pulse duration-dependent effects while sequences of pulses are processed. The data are in agreement with a mechanism in which processing of a sound pulse has an effect on the processing of the subsequent pulse, as outlined in the flow of activity in a delay-line and coincidence-detector circuit. Additionally our data reveal a substantial increase in the gain of phonotaxis, when the number of pulses of a chirp is increased from two to three. © 2017 The Authors.

  16. IDENTIFIKASI PROFIL DASAR LAUT MENGGUNAKAN INSTRUMEN SIDE SCAN SONAR DENGAN METODE BEAM PATTERN DISCRETE-EQUI-SPACED UNSHADED LINE ARRAY

    Directory of Open Access Journals (Sweden)

    Muhammad Zainuddin Lubis

    2017-05-01

    Full Text Available Laut Punggur merupakan laut yang terletak di Batam, Kepulauan Riau yang mempunyai beragam habitat objek,dan bentuk struktur bawah laut yang memiliki dinamika laut yang sangat tinggi. Side scan sonar (SSS merupakan instrumen pengembangan sistem sonar yang mampu menunjukkan dalam gambar dua dimensional permukaan dasar laut dengan kondisi kontur, topografi, dan target secara bersamaan. Metode Beam Pattern Discrete-Equi-Spaced Unshaded Line Array digunakan untuk menghitung beam pattern dua dimensi yang tergantung pada sudut dari gelombang suara yang masuk dari sumbu array yang diterima tergantung pada sudut di mana sinar suara pada array. Penelitian ini dilakukan pada Desember 2016 di laut Punggur,Batam, Kepulauan Riau-Indonesia, dengan koordinat 104 ° 08,7102 E dan 1° 03,2448 N sampai 1 ° 03.3977 N dan 104 ° 08,8133 E, menggunakan instrumen Side Scan Sonar C-Max CM2 Tow fish dengan frekuensi 325 kHz. Hasil yang diperoleh dari perekaman terdapat 7 target, dan Beam pattern dari metode Beam Discrete-Equi-Spaced Unshaded Line Array target 4 memiliki nilai tertinggi pada directivity Pattern yaitu 21.08 dB. Hasil model beam pattern ini memiliki nilai pusat pada incidence angle (o terhadap Directivity pattern (dB tidak berada di nilai 0 ataupun pada pusat beam pattern yang dihasilkan pada target 6 dengan nilai incident angle -1.5 o dan 1.5o mengalami penurunan hingga -40 dB. Karakteristik sedimen dasar perairan di laut punggur ditemukan lebih banyak pasir. Hasil metode Beam Discrete-Equi-Spaced Unshaded Line Array ditemukan bangkai kapal tenggelam.Kata Kunci: Side Scan Sonar, Beam Pattern Discrete-Equi-Spaced Unshaded Line Array, Incidence angle, Directivity pattern IDENTIFICATION OF SEABED PROFILE USING SIDE SCAN SONAR INSTRUMENT WITH PATTERN DISCRETE-EQUI-SPACED UNSHADED LINE ARRAY METHODRiau Islands is an island that has a variety of habitat objects, and forms of submarine structures that have a very high ocean dynamics, Punggur Sea is the sea

  17. LINES

    Directory of Open Access Journals (Sweden)

    Minas Bakalchev

    2015-10-01

    Full Text Available The perception of elements in a system often creates their interdependence, interconditionality, and suppression. The lines from a basic geometrical element have become the model of a reductive world based on isolation according to certain criteria such as function, structure, and social organization. Their traces are experienced in the contemporary world as fragments or ruins of a system of domination of an assumed hierarchical unity. How can one release oneself from such dependence or determinism? How can the lines become less “systematic” and forms more autonomous, and less reductive? How is a form released from modernistic determinism on the new controversial ground? How can these elements or forms of representation become forms of action in the present complex world? In this paper, the meaning of lines through the ideas of Le Corbusier, Leonidov, Picasso, and Hitchcock is presented. Spatial research was made through a series of examples arising from the projects of the architectural studio “Residential Transformations”, which was a backbone for mapping the possibilities ranging from playfulness to exactness, as tactics of transformation in the different contexts of the contemporary world.

  18. Relapse pattern and second-line treatment following multimodality treatment for malignant pleural mesothelioma.

    Science.gov (United States)

    Kostron, Arthur; Friess, Martina; Crameri, Ornella; Inci, Ilhan; Schneiter, Didier; Hillinger, Sven; Stahel, Rolf; Weder, Walter; Opitz, Isabelle

    2016-05-01

    To analyse the relapse pattern and influence of second-line treatment after recurrence of malignant pleural mesothelioma (MPM) in patients who had previously undergone multimodality treatment. Between September 1999 and December 2013, 136 patients underwent macroscopic complete resection (MCR) by extrapleural pneumonectomy after induction chemotherapy for MPM. We analysed 106 patients who presented with recurrent disease until October 2014. Data were retrieved from our mesothelioma database, with additional information regarding precise localization gathered by reviewing the imaging and medical records. The overall recurrence rate was 78% (106/136 patients). The median freedom from recurrence was 9 months after surgery [95% confidence interval (95% CI) 7-10]. Local recurrence only was observed in 33 patients (31%), distant metastases only in 27 patients (26%) and simultaneous distant and local recurrence in 46 patients (43%). Local recurrence was observed significantly less frequently in patients having received adjuvant radiotherapy (19 vs 47%, P = 0.003), but there was no significant impact on overall survival (OS) [radiation: 22 months (95% CI 19-24); no-radiation: 23 months (95% CI 18-27), P = 0.6]. The median OS was 22 months (95% CI 21-24), median post-recurrence survival (PRS) was 7 months (95% CI 5-9) and patients with local recurrence only survived significantly longer (12 months, 95% CI 8-16) compared with patients with distant recurrence only (5 months, 95% CI 2-8) or distant plus local relapse (6 months, 95% CI 3-9; P = 0.04). A total of 78 patients received a second-line therapy after tumour recurrence: chemotherapy (n = 48), local radiotherapy (n = 9), surgery (n = 10) or a combination thereof (n = 11). Patients undergoing second-line treatment survived significantly longer compared with patients not receiving therapy (P treatment including MCR. In the present cohort, active treatment seems beneficial to the patient since surgical excision of local

  19. Younger Dryas equilibrium line altitudes and precipitation patterns in the Alps

    Science.gov (United States)

    Kerschner, Hanns; Moran, Andrew; Ivy-Ochs, Susan

    2016-04-01

    Moraine systems of the "Egesen Stadial" are widespread and easily identifiable features in the Alps. Absolute dating with terrestrial cosmogenic radionuclides shows that the maximum extent was reached during the early Younger Dryas (YD), probably as a reaction to the intense climatic downturn subsequent to Lateglacial Interstadial. In recent years, several new studies and the availability of high-quality laser-scan hillshades and orthophotos allowed a significant extension of the database of YD glaciers as "palaeoprecipitation gauges" to large hitherto unmapped regions in the Austrian and Swiss Alps. The equilibrium line altitude (ELA) of the glaciers and its lowering relative to the Little Ice Age ELA (dELA) shows a distinct and systematic spatial pattern. Along the northern slope of the Alps, dELAs are usually large (around 400 m and perhaps even more), while dELAs range around 200 m in the well sheltered areas of the central Alps, e.g. in the Engadine and in western Tyrol. Both stochastic glacier-climate models (e.g. Ohmura et al. 1992) and the heat- and mass balance equation (Kuhn 1981) allow the reconstruction of precipitation change under the assumption of a spatially constant summer temperature depression, which in turn can be estimated from biological proxies. This allows to draw the spatial pattern of precipitation change with considerable detail. Precipitation change is clearly controlled by the local relief like high mountain chains, deeply incised and long valleys and mountain passes. Generally the contrast between the northern fringe of the Alps and the interior was more pronounced than today. Climate in the Northern and and Northwestern Alps was rather wet with precipitation totals eventually exceeding modern annual sums. The central Alps received 20 - 30% less precipitation than today, mainly due to reduced winter precipitation. In the southern Alps, still scarce spatial information points to precipitation sums which were approximately similar to

  20. Alloying in an Intercalation Host: Metal Titanium Niobates as Anodes for Rechargeable Alkali-Ion Batteries.

    Science.gov (United States)

    Das, Suman; Swain, Diptikanta; Araujo, Rafael B; Shi, Songxin; Ahuja, Rajeev; Row, Tayur N Guru; Bhattacharyya, Aninda J

    2018-02-02

    We discuss here a unique flexible non-carbonaceous layered host, namely, metal titanium niobates (M-Ti-niobate, M: Al 3+ , Pb 2+ , Sb 3+ , Ba 2+ , Mg 2+ ), which can synergistically store both lithium ions and sodium ions via a simultaneous intercalation and alloying mechanisms. M-Ti-niobate is formed by ion exchange of the K + ions, which are specifically located inside galleries between the layers formed by edge and corner sharing TiO 6 and NbO 6 octahedral units in the sol-gel synthesized potassium titanium niobate (KTiNbO 5 ). Drastic volume changes (approximately 300-400 %) typically associated with an alloying mechanism of storage are completely tackled chemically by the unique chemical composition and structure of the M-Ti-niobates. The free space between the adjustable Ti/Nb octahedral layers easily accommodates the volume changes. Due to the presence of an optimum amount of multivalent alloying metal ions (50-75 % of total K + ) in the M-Ti-niobate, an efficient alloying reaction takes place directly with ions and completely eliminates any form of mechanical degradation of the electroactive particles. The M-Ti-niobate can be cycled over a wide voltage range (as low as 0.01 V) and displays remarkably stable Li + and Na + ion cyclability (>2 Li + /Na + per formula unit) for widely varying current densities over few hundreds to thousands of successive cycles. The simultaneous intercalation and alloying storage mechanisms is also studied within the density functional theory (DFT) framework. DFT expectedly shows a very small variation in the volume of Al-titanium niobate following lithium alloying. Moreover, the theoretical investigations also conclusively support the occurrence of the alloying process of Li ions with the Al ions along with the intercalation process during discharge. The M-Ti-niobates studied here demonstrate a paradigm shift in chemical design of electrodes and will pave the way for the development of a multitude of improved electrodes

  1. Dynamic evolving spiking neural networks for on-line spatio- and spectro-temporal pattern recognition.

    Science.gov (United States)

    Kasabov, Nikola; Dhoble, Kshitij; Nuntalid, Nuttapod; Indiveri, Giacomo

    2013-05-01

    On-line learning and recognition of spatio- and spectro-temporal data (SSTD) is a very challenging task and an important one for the future development of autonomous machine learning systems with broad applications. Models based on spiking neural networks (SNN) have already proved their potential in capturing spatial and temporal data. One class of them, the evolving SNN (eSNN), uses a one-pass rank-order learning mechanism and a strategy to evolve a new spiking neuron and new connections to learn new patterns from incoming data. So far these networks have been mainly used for fast image and speech frame-based recognition. Alternative spike-time learning methods, such as Spike-Timing Dependent Plasticity (STDP) and its variant Spike Driven Synaptic Plasticity (SDSP), can also be used to learn spatio-temporal representations, but they usually require many iterations in an unsupervised or semi-supervised mode of learning. This paper introduces a new class of eSNN, dynamic eSNN, that utilise both rank-order learning and dynamic synapses to learn SSTD in a fast, on-line mode. The paper also introduces a new model called deSNN, that utilises rank-order learning and SDSP spike-time learning in unsupervised, supervised, or semi-supervised modes. The SDSP learning is used to evolve dynamically the network changing connection weights that capture spatio-temporal spike data clusters both during training and during recall. The new deSNN model is first illustrated on simple examples and then applied on two case study applications: (1) moving object recognition using address-event representation (AER) with data collected using a silicon retina device; (2) EEG SSTD recognition for brain-computer interfaces. The deSNN models resulted in a superior performance in terms of accuracy and speed when compared with other SNN models that use either rank-order or STDP learning. The reason is that the deSNN makes use of both the information contained in the order of the first input spikes

  2. New, dense, and fast scintillators based on rare-earth tantalo-niobates

    International Nuclear Information System (INIS)

    Voloshyna, O.V.; Boiaryntseva, I.A.; Baumer, V.N.; Ivanov, A.I.; Korjik, M.V.; Sidletskiy, O.Ts.

    2014-01-01

    Samples of undoped yttrium and gadolinium tantalo-niobates with common formulae RE(Nb x Ta 1−x )O 4 , where RE=Y or Gd and x=0–1, have been obtained by solid-state reaction. Systematic study of structural, luminescent, and scintillation properties of these compounds was carried out. Lattice parameters and space groups of the mixed compounds were identified. UV- and X-ray luminescence spectra, as well as relative light outputs and scintillation decay times are measured. Gadolinium tantalo-niobate with the formulae GdNb 0.2 Ta 0.8 O 4 showed the light output around 13 times larger than PbWO 4 and fast decay with time constant 12 ns without additional slow component. Gadolinium tantalo-niobates may be considered as promising materials for high energy physics due to extremely high density, substantial light output, and fast decay. -- Highlights: •Structural, optical and scintillation properties of the rare earth tantalo-niobates were studied. •Light output shows about gradual increase with Nb content in GdTa x Nb 1−x O 4 . •Light output increases by 2–7 times relatively to yttrium tantalate and niobate in YTa x Nb 1−x O 4 . •GdTa 0.8 Nb 0.2 O 4 demonstrates the most promising scintillation parameters

  3. 640-Gbit/s data transmission and clock recovery using an ultrafast periodically poled lithium niobate device

    DEFF Research Database (Denmark)

    Oxenløwe, Leif Katsuo; Gomez-Agis, F.; Ware, C.

    2009-01-01

    This paper presents the first demonstration of the use of a periodically poled lithium niobate device for signal processing at 640 Gbit/s. Clock recovery is performed successfully using the lithium niobate device, and the clock signal is used to control fiber-based demultiplexer. The full 640-Gbit...

  4. Determination of trace elements in lithium niobate crystals by solid sampling and solution-based spectrometry methods

    Energy Technology Data Exchange (ETDEWEB)

    Bencs, Laszlo, E-mail: bencs.laszlo@wigner.mta.hu [Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Gyoergy, Krisztina; Kardos, Marta [Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Osan, Janos; Alfoeldy, Balint [Institute for Atomic Energy Research, Centre for Energy Research, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Varga, Imre [Department of Analytical Chemistry, Institute of Chemistry, Lorand Eoetvoes University, P.O. Box 32, H-1518 Budapest (Hungary); Ajtony, Zsolt [Institute of Food Science, University of West Hungary, H-9200 Mosonmagyarovar, Lucsony u. 15-17 (Hungary); Szoboszlai, Norbert [Department of Analytical Chemistry, Institute of Chemistry, Lorand Eoetvoes University, P.O. Box 32, H-1518 Budapest (Hungary); Stefanka, Zsolt [Institute for Isotope Research, Centre for Energy Research, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Hungarian Atomic Energy Authority, H-1136 Budapest, Fenyes Adolf u. 4 (Hungary); Szeles, Eva [Institute for Isotope Research, Centre for Energy Research, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Kovacs, Laszlo [Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary)

    2012-05-13

    Highlights: Black-Right-Pointing-Pointer Solid sampling GFAAS was studied for Cr, Fe and Mn determination in lithium niobate. Black-Right-Pointing-Pointer Solution based GFAAS, FAAS, ICP-OES and ICP-MS were elaborated for method validation. Black-Right-Pointing-Pointer The performances of the elaborated spectrochemical methods have been compared. Black-Right-Pointing-Pointer The chemical forms of the matrix produced in GFAAS cycles were studied by XANES. - Abstract: Solid sampling (SS) graphite furnace atomic absorption spectrometry (GFAAS) and solution-based (SB) methods of GFAAS, flame atomic absorption spectrometry (FAAS), inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) were elaborated and/or optimized for the determination of Cr, Fe and Mn trace elements used as dopants in lithium niobate optical crystals. The calibration of the SS-GFAAS analysis was possible with the application of the three-point-estimation standard addition method, while the SB methods were mostly calibrated against matrix-matched and/or acidic standards. Spectral and non-spectral interferences were studied in SB-GFAAS after digestion of the samples. The SS-GFAAS method required the use of less sensitive spectral lines of the analytes and a higher internal furnace gas (Ar) flow rate to decrease the sensitivity for crystal samples of higher (doped) analyte content. The chemical forms of the matrix produced at various stages of the graphite furnace heating cycle, dispensed either as a solid sample or a solution (after digestion), were studied by means of the X-ray near-edge absorption structure (XANES). These results revealed that the solid matrix vaporized/deposited in the graphite furnace is mostly present in the metallic form, while the dry residue from the solution form mostly vaporized/deposited as the oxide of niobium.

  5. Sintering of Lead-Free Piezoelectric Sodium Potassium Niobate Ceramics

    Directory of Open Access Journals (Sweden)

    Barbara Malič

    2015-12-01

    Full Text Available The potassium sodium niobate, K0.5Na0.5NbO3, solid solution (KNN is considered as one of the most promising, environment-friendly, lead-free candidates to replace highly efficient, lead-based piezoelectrics. Since the first reports of KNN, it has been recognized that obtaining phase-pure materials with a high density and a uniform, fine-grained microstructure is a major challenge. For this reason the present paper reviews the different methods for consolidating KNN ceramics. The difficulties involved in the solid-state synthesis of KNN powder, i.e., obtaining phase purity, the stoichiometry of the perovskite phase, and the chemical homogeneity, are discussed. The solid-state sintering of stoichiometric KNN is characterized by poor densification and an extremely narrow sintering-temperature range, which is close to the solidus temperature. A study of the initial sintering stage revealed that coarsening of the microstructure without densification contributes to a reduction of the driving force for sintering. The influences of the (K + Na/Nb molar ratio, the presence of a liquid phase, chemical modifications (doping, complex solid solutions and different atmospheres (i.e., defect chemistry on the sintering are discussed. Special sintering techniques, such as pressure-assisted sintering and spark-plasma sintering, can be effective methods for enhancing the density of KNN ceramics. The sintering behavior of KNN is compared to that of a representative piezoelectric lead zirconate titanate (PZT.

  6. Acoustic wave filter based on periodically poled lithium niobate.

    Science.gov (United States)

    Courjon, Emilie; Bassignot, Florent; Ulliac, Gwenn; Benchabane, Sarah; Ballandras, Sylvain

    2012-09-01

    Solutions for the development of compact RF passive transducers as an alternative to standard surface or bulk acoustic wave devices are receiving increasing interest. This article presents results on the development of an acoustic band-pass filter based on periodically poled ferroelectric domains in lithium niobate. The fabrication of periodically poled transducers (PPTs) operating in the range of 20 to 650 MHz has been achieved on 3-in (76.2-mm) 500-μm-thick wafers. This kind of transducer is able to excite elliptical as well as longitudinal modes, yielding phase velocities of about 3800 and 6500 ms(-1), respectively. A new type of acoustic band-pass filter is proposed, based on the use of PPTs instead of the SAWs excited by classical interdigital transducers. The design and the fabrication of such a filter are presented, as well as experimental measurements of its electrical response and transfer function. The feasibility of such a PPT-based filter is thereby demonstrated and the limitations of this method are discussed.

  7. Sintering of Lead-Free Piezoelectric Sodium Potassium Niobate Ceramics

    Science.gov (United States)

    Malič, Barbara; Koruza, Jurij; Hreščak, Jitka; Bernard, Janez; Wang, Ke; Fisher, John G.; Benčan, Andreja

    2015-01-01

    The potassium sodium niobate, K0.5Na0.5NbO3, solid solution (KNN) is considered as one of the most promising, environment-friendly, lead-free candidates to replace highly efficient, lead-based piezoelectrics. Since the first reports of KNN, it has been recognized that obtaining phase-pure materials with a high density and a uniform, fine-grained microstructure is a major challenge. For this reason the present paper reviews the different methods for consolidating KNN ceramics. The difficulties involved in the solid-state synthesis of KNN powder, i.e., obtaining phase purity, the stoichiometry of the perovskite phase, and the chemical homogeneity, are discussed. The solid-state sintering of stoichiometric KNN is characterized by poor densification and an extremely narrow sintering-temperature range, which is close to the solidus temperature. A study of the initial sintering stage revealed that coarsening of the microstructure without densification contributes to a reduction of the driving force for sintering. The influences of the (K + Na)/Nb molar ratio, the presence of a liquid phase, chemical modifications (doping, complex solid solutions) and different atmospheres (i.e., defect chemistry) on the sintering are discussed. Special sintering techniques, such as pressure-assisted sintering and spark-plasma sintering, can be effective methods for enhancing the density of KNN ceramics. The sintering behavior of KNN is compared to that of a representative piezoelectric lead zirconate titanate (PZT). PMID:28793702

  8. Spectrophotometric determination of optical parameters of lithium niobate films

    Directory of Open Access Journals (Sweden)

    Nina S. Kozlova

    2017-09-01

    Full Text Available Lithium niobate films on silicon substrates have been synthesized by high-frequency magnetron sputtering of a target. The spectral dependences of the reflectance in the 300–700 nm range at small incidence angles and the angular dependence of p- and s-polarized light for a discrete set of wavelengths from 300 to 700 nm with wavelength increments of 50 nm, for angles of 1 arc deg, have been obtained using spectrophotometry. The refractive indicies, the film thickness and the extinction coefficients have been determined using a numerical method for solving inverse problems. The initial approximations for the solution of inverse problems have been defined using methods based on the estimation of the interference extrema positions in the reflection spectra. The resultant refractive indicies of the film differ from those typical of LiNbO3 single crystals. These differences are attributed to the structural disorder induced by the predominant crystallite orientation and the absorption in the film.

  9. Synthesis and characterization of bismuth zinc niobate pyrochlore nanopowders

    Directory of Open Access Journals (Sweden)

    Sonia Maria Zanetti

    2007-09-01

    Full Text Available Bismuth zinc niobate pyrochlores Bi1.5ZnNb1.5O7 (alpha-BZN, and Bi2(Zn1/3Nb2/32O 7 (beta-BZN have been synthesized by chemical method based on the polymeric precursors. The pyrochlore phase was investigated by differential scanning calorimetry, infrared spectroscopy, and X ray diffraction. Powder and sintered pellets morphology was examined by scanning electron microscopy. The study of alpha-BZN phase formation reveals that, at 500 °C, the pyrochlore phase was already present while a single-phased nanopowder was obtained after calcination at 700 °C. The crystallization mechanism of the beta-BZN is quite different, occurring through the crystallization of alpha-BZN and BiNbO4 intermediary phases. Both compositions yielded soft agglomerated powders. alpha-BZN pellets, sintered at 800 °C for 2 hours, presented a relative density of 97.3% while those of beta-BZN, sintered at 900 °C for 2 hours, reached only 91.8%. Dielectric constant and dielectric loss, measured at 1 MHz, were 150 and 4 x/10-4 for a-BZN, and 97 and 8 x 10-4 for beta-BZN.

  10. Diamond micro-milling of lithium niobate for sensing applications

    International Nuclear Information System (INIS)

    Huo, Dehong; Choong, Zi Jie; Shi, Yilun; Hedley, John; Zhao, Yan

    2016-01-01

    Lithium niobate (LiNbO 3 ) is a crystalline material which is widely applied in surface acoustic wave, microelectromechanical systems (MEMS), and optical devices, owing to its superior physical, optical, and electronic properties. Due to its low toughness and chemical inactivity, LiNbO 3 is considered to be a hard-to-machine material and has been traditionally left as as an inert substrate upon which other micro structures are deposited. However, in order to make use of its superior material properties and increase efficiency, the fabrication of microstructures directly on LiNbO 3 is in high demand. This paper presents an experimental investigation on the micro machinability of LiNbO 3 via micro milling with the aim of obtaining optimal process parameters. Machining of micro slots was performed on Z -cut LiNbO 3 wafers using single crystal diamond tools. Surface and edge quality, cutting forces, and the crystallographic effect were examined and characterized. Ductile mode machining of LiNbO 3 was found to be feasible at a low feed rate and small depth of cut. A strong crystallographic effect on the machined surface quality was also observed. Finally, some LiNbO 3 micro components applicable to sensing applications were fabricated. (paper)

  11. Magnetophotorefractive effect and interference filters in lithium niobate

    International Nuclear Information System (INIS)

    Dam-Hansen, C.

    1996-03-01

    This thesis deals with the fundamental photorefractive and photovoltaic properties of iron-doped lithium niobate crystals. Experimental observations of a strong magnetic field effect on the energy coupling and grating formation in a vectorial interaction scheme are presented. To the author's knowledge these are the first reported results in the field. It is shown that an enhancement of the diffraction efficiency of 60% is possible by applying even a moderate magnetic field of 0.23 T. A new theoretical model of the magnetophotorefractive effect in the vectorial interaction scheme is presented. It describes the space-charge field formation, two-wave mixing and grating formation under the influence of an externally applied magnetic field. Good agreement with the experimental results and the first measurement of nondiagonal components of the magnetophotovoltaic tensor are reported. A theoretical model for the temperature properties of photorefractive interference filters with subangstrom bandwidths are presented and compared favourably with experimental investigations. A novel method for determining the spectral response of these filters from a combined thermal and angular response measurements is described. (au) 9 tabs., 30 ills., 84 refs

  12. Analysis of Waveguides on Lithium Niobate Thin Films

    Directory of Open Access Journals (Sweden)

    Yiwen Wang

    2018-04-01

    Full Text Available Waveguides formed by etching, proton-exchange (PE, and strip-loaded on single-crystal lithium niobate (LN thin film were designed and simulated by a full-vectorial finite difference method. The single-mode condition, optical power distribution, and bending loss of these kinds of waveguides were studied and compared systematically. For the PE waveguide, the optical power distributed in LN layer had negligible change with the increase of PE thickness. For the strip-loaded waveguide, the relationships between optical power distribution in LN layer and waveguide thickness were different for quasi-TE (q-TE and quasi-TM (q-TM modes. The bending loss would decrease with the increase of bending radius. There was a bending loss caused by the electromagnetic field leakage when the neff of q-TM waveguide was smaller than that of nearby TE planar waveguide. LN ridge waveguides possessed a low bending loss even at a relatively small bending radius. This study is helpful for the understanding of waveguide structures as well as for the optimization and the fabrication of high-density integrated optical components.

  13. Tunable dual-wavelength filter and its group delay dispersion in domain-engineered lithium niobate

    Directory of Open Access Journals (Sweden)

    Guang-hao Shao

    2016-12-01

    Full Text Available A tunable dual-wavelength filter is experimentally demonstrated in domain-engineered lithium niobate. Application of an electric field on the y-surfaces of the sample results in the optical axes rotating clockwise and anticlockwise, which makes selective polarization rotation. The quasi phase-matching wavelengths could be adjusted through suitable domain design. A unique dual valley spectrum is obtained in a periodically poled lithium niobate structure with a central defect if the sample is placed between two parallel polarizers. The expected bandwidth could be varied from ∼1 nm to ∼40 nm. Moreover, both the spectral response and group delay dispersion could be engineered.

  14. Annealing behaviour of MeV erbium implanted lithium niobate

    Energy Technology Data Exchange (ETDEWEB)

    Gortmaker, P.; McCallum, J.C. [Royal Melbourne Inst. of Tech., VIC (Australia)

    1993-12-31

    Lithium niobate (LiNbO{sub 3}) is a crystalline ceramic commonly used in the fabrication of optoelectronic devices. Recently, rare earth doping of LiNbO{sub 3} has become a topic of particular interest. The electronic configuration of rare earth elements such as Erbium (Er) and Neodymium (Nd) allows them to lase in nearly any host matrix making fabrication of a whole range of new optoelectronic devices possible. At present, the doping technique, for LiNbO{sub 3} are centred upon diffusion technology, but the diffusion profiles for the rare earths are not generally well-matched to the optical modes of the device. The aim of this research is to develop MeV implantation and annealing conditions of rare earth doped LiNbO{sub 3} that would be compatible with optoelectronic device fabrication. To determine the characteristics of the rare earth elements in the LiNbO{sub 3} host material over the depth range of interest in optoelectronic device applications, high energy Rutherford backscattering spectrometry and ion channeling (RBS-C) must be used. Presented here are the Er depth profile and lattice damage results obtained from 5 MeV RBS-C measurements on samples of LiNbO{sub 3} implanted with various doses of MeV Erbium and subsequently thermally annealed at a temperature of 1000 deg C. It was found that there is a peak implant concentration (2 x 10{sup 16} Er/cm{sup 2}) for which erbium no longer goes substitutional in the lattice, and the implantation damage is not fully removed by annealing. 8 refs., 3 figs.

  15. Lightning arrestor connector lead magnesium niobate qualification pellet test procedures.

    Energy Technology Data Exchange (ETDEWEB)

    Tuohig, W. (Honeywell FM& T, Kansas City, MO); Mahoney, Patrick A.; Tuttle, Bruce Andrew; Wheeler, Jill Susanne

    2009-02-01

    Enhanced knowledge preservation for DOE DP technical component activities has recently received much attention. As part of this recent knowledge preservation effort, improved documentation of the sample preparation and electrical testing procedures for lead magnesium niobate--lead titanate (PMN/PT) qualification pellets was completed. The qualification pellets are fabricated from the same parent powders used to produce PMN/PT lightning arrestor connector (LAC) granules at HWF&T. In our report, the procedures for fired pellet surface preparation, electrode deposition, electrical testing and data recording are described. The dielectric measurements described in our report are an information only test. Technical reasons for selecting the electrode material, electrode size and geometry are presented. The electrical testing is based on measuring the dielectric constant and dissipation factor of the pellet during cooling from 280 C to 220 C. The most important data are the temperature for which the peak dielectric constant occurs (Curie Point temperature) and the peak dielectric constant magnitude. We determined that the peak dielectric constant for our procedure would be that measured at 1 kHz at the Curie Point. Both the peak dielectric constant and the Curie point parameters provide semi-quantitative information concerning the chemical and microstructural homogeneity of the parent material used for the production of PMN/PT granules for LACs. Finally, we have proposed flag limits for the dielectric data for the pellets. Specifically, if the temperature of the peak dielectric constant falls outside the range of 250 C {+-} 30 C we propose that a flag limit be imposed that will initiate communication between production agency and design agency personnel. If the peak dielectric constant measured falls outside the range 25,000 {+-} 10,000 we also propose that a flag limit be imposed.

  16. Hierarchical nitrogen doped bismuth niobate architectures: controllable synthesis and excellent photocatalytic activity.

    Science.gov (United States)

    Hou, Jungang; Cao, Rui; Wang, Zheng; Jiao, Shuqiang; Zhu, Hongmin

    2012-05-30

    Nitrogen doped bismuth niobate (N-Bi(3)NbO(7)) hierarchical architectures were synthesized via a facile two-step hydrothermal process. XRD patterns revealed that the defect fluorite-type crystal structure of Bi(3)NbO(7) remained intact upon nitrogen doping. Electron microscopy showed the N-Bi(3)NbO(7) architecture has a unique peony-like spherical superstructure composed of numerous nanosheets. UV-vis spectra indicated that nitrogen doping in the compound results in a red-shift of the absorption edge from 450nm to 470nm. XPS indicated that [Bi/Nb]N bonds were formed by inducing nitrogen to replace a small amount of oxygen in Bi(3)NbO(7-x)N(x), which is explained by electronic structure calculations including energy band and density of states. Based on observations of architectures formation, a possible growth mechanism was proposed to explain the transformation of polyhedral-like nanoparticles to peony-like microflowers via an Ostwald riping mechanism followed by self-assembly. The N-Bi(3)NbO(7) architectures due to the large specific surface area and nitrogen doping exhibited higher photocatalytic activities in the decomposition of organic pollutant under visible-light irradiation than Bi(3)NbO(7) nanoparticles. Furthermore, an enhanced photocatalytic performance was also observed for Ag/N-Bi(3)NbO(7) architectures, which can be attributed to the synergetic effects between noble metal and semiconductor component. Crown Copyright © 2012. Published by Elsevier B.V. All rights reserved.

  17. The pattern of trunk lateral line afferents and efferents in the rainbow trout (Salmo gairdneri)

    NARCIS (Netherlands)

    Schellart, N. A.; Prins, M.; Kroese, A. B.

    1992-01-01

    The primary projections of the mechanosensory posterior lateral line nerve of the rainbow trout Salmo gairdneri, a teleost without lateral line specializations, were studied by applying horseradish peroxidase (HRP). The afferents project nearly exclusively to the nucleus medialis and a small nucleus

  18. Crystallization of Reduced Strontium and Barium Niobate Perovskites from Borate Fluxes.

    NARCIS (Netherlands)

    Hessen, B.; Sunshine, S.A.; Siegrist, T.; Jimenez, R.

    1991-01-01

    Single crystals of three AxNbO3 (A = Sr, Ba) reduced niobate cubic perovskites have been obtained by recrystallization of reduced ternary ceramic precursors from borate fluxes under high-vacuum. Product formation could be influenced by variation of the alkaline-earth metal oxide content of the flux,

  19. Optical planar waveguide in sodium-doped calcium barium niobate crystals by carbon ion implantation

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Jin-Hua, E-mail: zhaojinhuazjh@gmail.com [School of Science, Shandong Jianzhu University, Jinan 250101 (China); Qin, Xi-Feng; Wang, Feng-Xiang; Fu, Gang; Wang, Hui-Lin [School of Science, Shandong Jianzhu University, Jinan 250101 (China); Wang, Xue-Lin [School of Physics, Key Laboratory of Particle Physics and Particle Irradiation, Ministry of Education, and State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China)

    2013-07-15

    There is great interest in niobate crystals which belong to the tetragonal tungsten bronze (TTB) families owing to their intriguing properties. As one representative of such crystals, CBN (calcium barium niobate) has attracted rapidly growing attention. Because it has a higher Curie temperature than SBN (strontium barium niobate), possesses outstanding ferroelectric and it possesses optical properties. In addition, doped with sodium, CBN will show a higher Curie temperature than pure CBN. We report on the fabrication and characterization of optical planar waveguide in x-cut sodium-doped calcium barium niobate crystal by using C ion implantation. The guided-mode properties at the wavelength of 633 and 1539 nm are investigated through prism-coupling measurements, respectively. By applying direct end-face coupling arrangement, the near-field optical intensity distribution of waveguide modes is measured at 633 nm. For comparison, the modal profile of the same guided mode is also numerically calculated by the finite difference beam-propagation method via computer software BeamPROP. The transmission spectra of the waveguide before and after ion implantation treatments were investigated also. Our experiment results reveal that the waveguide could propagate light with transverse magnetic polarized direction only and it is assumed that the polarization selectivity of CBN crystal may responsible for this phenomenon.

  20. Determination of electro-optic coefficients of lithium niobate crystal by polarization and interference methods

    Science.gov (United States)

    Syuy, A. V.; Kile, E. O.

    2016-11-01

    In this paper electrooptical coefficients r22, [r13 - 0.9r33 ], of nominally pure single congruent crystal of lithium niobate are determined. Measurement of electro-optic coefficients is produced by two independent methods: polarization and interference. The polarization scheme is based on the Senarmont method and interference scheme - on conoscopic figures.

  1. Investigation of enhanced forward and backward anti-stokes Raman signals in lithium niobate waveguides

    Energy Technology Data Exchange (ETDEWEB)

    Li, Da; Hong, Pengda; Ding, Yujie J., E-mail: yding300@gmail.com [Department of Electrical and Computer Engineering, Lehigh University, Bethlehem, Pennsylvania 18015 (United States); Liu, Zhaojun; Wang, Lei [Department of Electrical and Computer Engineering, Lehigh University, Bethlehem, Pennsylvania 18015 (United States); School of Information Science and Engineering, Shandong University, Jinan, Shandong 250100 (China); Hua, Ping-Rang; Zhang, De-Long [School of Precision Instruments and Opto-electronics Engineering, Tianjin University, Tianjin 300072 (China)

    2015-07-07

    We have observed enhancements of the anti-Stokes Raman signals generated in lithium niobate waveguides in the forward and backward configurations by at least one order of magnitude under the pump power of the microwatt level. These output signals were measured using a single photon detector. The forward and backward propagating anti-Stokes signals exhibited different spectral features.

  2. Giant piezoelectricity in potassium-sodium niobate lead-free ceramics.

    Science.gov (United States)

    Wang, Xiaopeng; Wu, Jiagang; Xiao, Dingquan; Zhu, Jianguo; Cheng, Xiaojing; Zheng, Ting; Zhang, Binyu; Lou, Xiaojie; Wang, Xiangjian

    2014-02-19

    Environment protection and human health concern is the driving force to eliminate the lead from commercial piezoelectric materials. In 2004, Saito et al. [ Saito et al., Nature , 2004 , 432 , 84 . ] developed an alkali niobate-based perovskite solid solution with a peak piezoelectric constant d33 of 416 pC/N when prepared in the textured polycrystalline form, intriguing the enthusiasm of developing high-performance lead-free piezoceramics. Although much attention has been paid on the alkali niobate-based system in the past ten years, no significant breakthrough in its d33 has yet been attained. Here, we report an alkali niobate-based lead-free piezoceramic with the largest d33 of ∼490 pC/N ever reported so far using conventional solid-state method. In addition, this material system also exhibits excellent integrated performance with d33∼390-490 pC/N and TC∼217-304 °C by optimizing the compositions. This giant d33 of the alkali niobate-based lead-free piezoceramics is ascribed to not only the construction of a new rhombohedral-tetragonal phase boundary but also enhanced dielectric and ferroelectric properties. Our finding may pave the way for "lead-free at last".

  3. Erbium medium temperature localised doping into lithium niobate and sapphire: A comparative study

    Czech Academy of Sciences Publication Activity Database

    Nekvindová, P.; Macková, Anna; Peřina, Vratislav; Červená, Jarmila; Čapek, P.; Schrofel, J.; Špirková, J.; Oswald, Jiří

    90-91, - (2003), s. 559-564 ISSN 1012-0394 Institutional research plan: CEZ:AV0Z1048901 Keywords : lithium niobate * sapphire * erbium Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.687, year: 2003

  4. Safe disposal of radioactive iodide ions from solutions by Ag2O grafted sodium niobate nanofibers.

    Science.gov (United States)

    Mu, Wanjun; Li, Xingliang; Liu, Guoping; Yu, Qianhong; Xie, Xiang; Wei, Hongyuan; Jian, Yuan

    2016-01-14

    Radioactive iodine isotopes are released into the environment by the nuclear industry and medical research institutions using radioactive materials, and have negative effects on organisms living within the ecosystem. Thus, safe disposal of radioactive iodine is necessary and crucial. For this reason, the uptake of iodide ions was investigated in Ag2O nanocrystal grafted sodium niobate nanofibers, which were prepared by forming a well-matched phase coherent interface between them. The resulting composite was applied as an efficient adsorbent for I(-) anions by forming an AgI precipitate, which also remained firmly attached to the substrates. Due to their one-dimensional morphology, the new adsorbents can be easily dispersed in liquids and readily separated after purification. This significantly enhances the adsorption efficiency and reduces the separation costs. The change in structure from the pristine sodium niobate to Ag2O anchored sodium niobate and to the used adsorbent was examined by using various characterization techniques. The effects of Ag(+) concentration, pH, equilibration time, ionic strength and competing ions on the iodide ion removal ability of the composite were studied. The Ag2O nanocrystal grafted sodium niobate adsorbent showed a high adsorption capacity and excellent selectivity for I(-) anions in basic solutions. Our results are useful for the further development of improved adsorbents for removing I(-) anions from basic wastewater.

  5. Flexible Piezoelectric Touch Sensor by Alignment of Lead-Free Alkaline Niobate Microcubes in PDMS

    NARCIS (Netherlands)

    Deutz, D.B.; Mascarenhas, N.T.; Schelen, J.B.J.; Leeuw, D.M. de; Zwaag, S. van der; Groen, P.

    2017-01-01

    A highly sensitive, lead-free, and flexible piezoelectric touch sensor is reported based on composite films of alkaline niobate K0.485Na0.485Li0.03NbO3 (KNLN) powders aligned in a polydimethylsiloxane (PDMS) matrix. KNLN powder is fabricated by solid-state sintering and consists of microcubes. The

  6. Flexible Piezoelectric Touch Sensor by Alignment of Lead-Free Alkaline Niobate Microcubes in PDMS

    NARCIS (Netherlands)

    Deutz, D.B.; Mascarenhas, N.T.; Schelen, J.B.J.; de Leeuw, D.M.; van der Zwaag, S.; Groen, W.A.

    2017-01-01

    A highly sensitive, lead-free, and flexible piezoelectric touch sensor is reported based on composite films of alkaline niobate K0.485Na0.485Li0.03NbO3 (KNLN) powders aligned in a polydimethylsiloxane (PDMS) matrix. KNLN powder is fabricated by

  7. Grapho-epitaxial sub-10nm line and space patterning using lamellar-forming Si-containing block copolymer

    Science.gov (United States)

    Sato, Hironobu; Kasahara, Yusuke; Kihara, Naoko; Seino, Yuriko; Miyagi, Ken; Minegishi, Shinya; Kubota, Hitoshi; Kobayashi, Katsutoshi; Kanai, Hideki; Kodera, Katsuyoshi; Kawamonzen, Yoshiaki; Shiraishi, Masayuki; Yamano, Hitoshi; Nomura, Satoshi; Azuma, Tsukasa; Hayakawa, Teruaki

    2016-04-01

    Si-rich poly((polyhedral oligomeric silsesquioxane) methacrylate)-b-poly(trifluoroethyl methacrylate) (PMAPOSS-b- PTFEMA) was used to form 8-nm half-pitch line and space (L/S) pattern via grapho-epitaxy. Vertical alignment of the lamellae was achieved without using either a neutral layer or top-coating material. Because PMAPOSS-b-PTFEMA forms vertical lamellae on a variety of substrates, we used two types of physical guide structures for grapho-epitaxy; one was a substrate guide and the other was a guide with an embedded under layer. On the substrate guide structure, a fine L/S pattern was obtained with trench widths equal to 3-7 periods of the lamella spacing of the block copolymer, Lo. However, on the embedded under layer guide structure, L/S pattern was observed only with 3 Lo and 4 Lo in trench width. Cross-sectional transmission electron microscope images revealed that a thick PMAPOSS layer was formed under the PMAPOSS-b-PTFEMA L/S pattern. Pattern transfer of the PMAPOSS-b-PTFEMA L/S pattern was prevented by a thick PMAPOSS layer. To achieve pattern transfer to the under layer, optimization of the surface properties is necessary.

  8. Sub-10nm lines and spaces patterning using grapho-epitaxial directed self-assembly of lamellar block copolymers

    Science.gov (United States)

    Seino, Yuriko; Sato, Hironobu; Kasahara, Yusuke; Minegishi, Shinya; Miyagi, Ken; Kubota, Hitoshi; Kanai, Hideki; Kodera, Katsuyoshi; Shiraishi, Masayuki; Kihara, Naoko; Kawamonzen, Yoshiaki; Tobana, Toshikatsu; Kobayashi, Katsutoshi; Yamano, Hitoshi; Azuma, Tsukasa; Nomura, Satoshi

    2016-04-01

    Our target at EIDEC is to study the feasibility of directed self-assembly (DSA) technology for semiconductor device manufacturing through electrical yield verification by development of such as process, material, metrology, simulation and design for DSA. We previously developed a grapho/chemo-hybrid coordinated line epitaxial process for sub-15-nm line-and-space (L/S) patterning using polystyrene-block-poly(methyl methacrylate) lamellar block copolymers (BCPs)1- 3. Electrical yield verification results showed that a 30% open yield was successfully achieved with a metal wire line length of 700 μm 4. In the next stage of the evaluation, a sub-10-nm L/S DSA patterning process based on graphoepitaxial DSA of 20-nm lamellar period organic BCPs was developed based on neutral layer and guide space width optimization. At a 30-nm guide height, problems such as BCP overflow and DSA line shorts were observed after the dry development. At a 60-nm guide height, grid-like short defects were observed under dry development shallow etch conditions and sub-10-nm L/S patterns were formed under optimized etch conditions with a suitable BCP film thickness margin. The process performance was evaluated in terms of defects and critical dimension measurements using an electron beam inspection system and critical dimension-scanning electron microscope metrology. The main DSA defects were short defects, and the spatial roughness appeared to be caused by the periodic pitches of these short defects and the guide roughness. We successfully demonstrated the fabrication of sub-10-nm metal wires consists of L/S, pad, connect and cut patterns with controlled alignment and stack structure through lithography, etching and CMP process on a 300- mm wafer using the fully integrated DSA process and damascene processing.

  9. Patterns of relapse and outcome of elderly multiple myeloma patients treated as front-line therapy with novel agents combinations

    Directory of Open Access Journals (Sweden)

    Aurelio Lopez

    2015-01-01

    Full Text Available We report the characteristics of relapse, treatment response, and outcomes of 145 elderly patients with multiple myeloma in first relapse after front-line treatment with VMP or VTP. Reappearance of CRAB symptoms (113 patients and more aggressive forms of disease (32 patients were the most common patterns of relapse. After second-line therapy, 75 (51.7% patients achieved at partial response and 16 (11% complete response (CR. Overall survival was longer among patients receiving VMP as front-line induction (21.4 vs. 14.4 months, P=0.037, in patients achieving CR (28.3 vs. 14.8 months; P=0.04, and in patients without aggressive relapse (28.6 vs. 7.6 months; P=0.0007.

  10. Interaction of light with impurities in lithium niobate crystals

    Energy Technology Data Exchange (ETDEWEB)

    Schwesyg, Judith Renate Marie-Luise

    2011-06-06

    Congruent lithium niobate (LiNbO{sub 3}) and 5-mol% MgO-doped LiNbO{sub 3} (MgO:LN) crystals are widely used as nonlinear-optical crystals in frequency-conversion devices due to their large nonlinear-optic coefficients. These devices usually require high optical pump powers, but absorption of photons by impurities limits their usability due to heat accumulation that leads to thermo-optic refractive index changes. These refractive index changes distort the beam shape and disturb the phase-matching condition. Furthermore pyroelectric fields can build up. In this thesis the residual optical absorption in congruent LiNbO{sub 3} (CLN) and MgO:LN crystals is studied. Absorption spectra of CLN and MgO:LN crystals between 400-2000 nm reveal a residual absorption up to 0.04 cm{sup -1}. This absorption is mainly caused by transition metal impurities. Between 2300-2800 nm unknown hydrogen absorption bands in CLN and MgO:LN are revealed on the order of 0.001 cm{sup -1}. High-temperature annealing is applied to the CLN and MgO:LN crystals, which decreases optical absorption by up to one order of magnitude. As an application, the operation of a 1550-nm pumped singly-resonant CW optical parametric oscillator, resonant around 2600 nm, using a low-loss, periodically-poled, annealed CLN crystal is demonstrated. Another issue that affects CLN is photorefractive damage (PRD), i.e. light-induced refractive index changes. In contrast, MgO:LN crystals do not suffer from PRD even at high optical intensities. However, it is shown in this thesis that PRD can occur within seconds in MgO:LN, using green laser light at light intensity levels as low as 100 mW/cm{sup 2}, if the crystal is heated by several degrees Celsius during or before illumination. Photorefractive damage does not occur in CLN crystals under the same conditions. We show that the pyroelectric effect together with an elevated photoconductivity compared to that of CLN causes this beam distortion and that this effect also

  11. Interaction of light with impurities in lithium niobate crystals

    International Nuclear Information System (INIS)

    Schwesyg, Judith Renate Marie-Luise

    2011-01-01

    Congruent lithium niobate (LiNbO 3 ) and 5-mol% MgO-doped LiNbO 3 (MgO:LN) crystals are widely used as nonlinear-optical crystals in frequency-conversion devices due to their large nonlinear-optic coefficients. These devices usually require high optical pump powers, but absorption of photons by impurities limits their usability due to heat accumulation that leads to thermo-optic refractive index changes. These refractive index changes distort the beam shape and disturb the phase-matching condition. Furthermore pyroelectric fields can build up. In this thesis the residual optical absorption in congruent LiNbO 3 (CLN) and MgO:LN crystals is studied. Absorption spectra of CLN and MgO:LN crystals between 400-2000 nm reveal a residual absorption up to 0.04 cm -1 . This absorption is mainly caused by transition metal impurities. Between 2300-2800 nm unknown hydrogen absorption bands in CLN and MgO:LN are revealed on the order of 0.001 cm -1 . High-temperature annealing is applied to the CLN and MgO:LN crystals, which decreases optical absorption by up to one order of magnitude. As an application, the operation of a 1550-nm pumped singly-resonant CW optical parametric oscillator, resonant around 2600 nm, using a low-loss, periodically-poled, annealed CLN crystal is demonstrated. Another issue that affects CLN is photorefractive damage (PRD), i.e. light-induced refractive index changes. In contrast, MgO:LN crystals do not suffer from PRD even at high optical intensities. However, it is shown in this thesis that PRD can occur within seconds in MgO:LN, using green laser light at light intensity levels as low as 100 mW/cm 2 , if the crystal is heated by several degrees Celsius during or before illumination. Photorefractive damage does not occur in CLN crystals under the same conditions. We show that the pyroelectric effect together with an elevated photoconductivity compared to that of CLN causes this beam distortion and that this effect also influences frequency conversion

  12. Evidence for enhancement of vortex matching field above 5 T and oxygen-deficient annuli around barium-niobate nanorods

    Science.gov (United States)

    Horii, Shigeru; Haruta, Masakazu; Ichinose, Ataru; Doi, Toshiya

    2015-10-01

    We report the dependence of critical temperature (Tc), the irreversibility line, the microstructure of nanorods with perovskite-based barium niobates (BNOs), and the c-axis length of the YBa2Cu3Oy (Y123) superconducting matrix on the BNO-doping level and growth temperature for Y123 thin films with BNO nanorods. The characteristic field (Bcr) determined from the vortex-Bose-glass-like irreversibility lines in Y123+BNO films is strongly correlated to the BNO nanorod density and the growth temperature. Despite a monotonic decrease in Tc with increasing Bcr and nanorod density, the irreversibility fields (Birr) were enhanced up to Bcr ˜ 5 T. From the Bcr value and the mean diameter of the BNO nanorod (˜10 nm), we estimate that a lower Tc matrix annulus with a diameter of 12-14 nm exists around each BNO nanorod due to the strong interface strains. Our present study suggests that generation of this lower Tc region around each BNO nanorod increases the vortex-pinning strength significantly and, moreover, may offer a new way of enhancing Birr for REBa2Cu3Oy film with nanorods.

  13. Pattern Recognition for Robotic Fish Swimming Gaits Based on Artificial Lateral Line System and Subtractive Clustering Algorithms

    Directory of Open Access Journals (Sweden)

    Hongli Liu

    2014-11-01

    Full Text Available The complicated and changeable underwater environment increases the difficulty of pattern recognition for robotic fish swimming gaits. Aiming at this question, environment sensing and pattern recognition using an artificial lateral system are investigated in this work. Imitating lateral line of real fish in nature, a novel artificial lateral line system for robotic fish is designed in this paper. Based on this novel system, the pressure information around robotic fish can be sensed when robotic fish swims in different gaits, so the feature points can be extracted from the pressure information. And then, based on the feature points, a subtractive clustering algorithm is used to recognize the swimming gaits of robotic fish. So the pattern state of robotic fish can be obtained, which provides a basis for the quick control of robotic fish in water. Finally, a validation experiment is conducted with freely swimming robotic fish. The validity of this novel system is demonstrated. And the feasibility and accuracy of subtractive clustering algorithm used in pattern recognition for robotic fish is verified too.

  14. [Method of infrared spectrum on-line pattern recognition of mixed gas distribution based on SVM].

    Science.gov (United States)

    Bai, Peng; Ji, Juan-zao; Zhang, Fa-qi; Li, Yan; Liu, Jun-hua; Zhu, Chang-chun

    2008-10-01

    In order to solve the difficulties that the spectrum training data samples of the massive mixed gas cannot be actually obtained, the analysis precision is low and it is not real time online analysis in the analysis of mixed gas component concentration, the support vector machine, a new information processing method, was used in the mixed gas infrared spectrum analysis, and the concept of mixed gas distribution pattern was proposed in the present paper. Based on the thought that the mixed gas distribution pattern recognition is carried out first, and then the analysis work of mixed gas component concentration is done, sixty kinds of mixed gas distribution pattern were determined after investigation and study, and 6000 mixed gas spectrum data samples were used for model training and testing. Sequential minimal optimization algorithm was applied to realize the decrement and the increase of online learning, and finally the model of infrared spectrum online pattern recognition of mixed gas distribution based on SVM was established. The model structure is composed of 2 levels, pattern recognition level and result output level. The pattern recognition level completes the task of mixed gas distribution pattern recognition; while the result output level is composed of 60 SVM calibration models, and it completes the task of mixed gas concentration analysis. Experimental results show that the correct recognition rate of mixture gas distribution pattern is not lower than 98.8%, and that the method can be used for online recognition of mixed gas distribution pattern under the conditions of small samples of a mixed gas, and can add new mixed gas online, and it has the practical application value.

  15. Patterns of HIV-1 drug resistance after first-line antiretroviral therapy (ART) failure in 6 sub-Saharan African countries: implications for second-line ART strategies.

    Science.gov (United States)

    Hamers, Raph L; Sigaloff, Kim C E; Wensing, Annemarie M; Wallis, Carole L; Kityo, Cissy; Siwale, Margaret; Mandaliya, Kishor; Ive, Prudence; Botes, Mariette E; Wellington, Maureen; Osibogun, Akin; Stevens, Wendy S; Rinke de Wit, Tobias F; Schuurman, Rob

    2012-06-01

    Human immunodeficiency virus type 1 (HIV-1) drug resistance may limit the benefits of antiretroviral therapy (ART). This cohort study examined patterns of drug-resistance mutations (DRMs) in individuals with virological failure on first-line ART at 13 clinical sites in 6 African countries and predicted their impact on second-line drug susceptibility. A total of 2588 antiretroviral-naive individuals initiated ART consisting of different nucleoside reverse transcriptase inhibitor (NRTI) backbones (zidovudine, stavudine, tenofovir, or abacavir, plus lamivudine or emtricitabine) with either efavirenz or nevirapine. Population sequencing after 12 months of ART was retrospectively performed if HIV RNA was >1000 copies/mL. The 2010 International Antiviral Society-USA list was used to score major DRMs. The Stanford algorithm was used to predict drug susceptibility. HIV-1 sequences were generated for 142 participants who virologically failed ART, of whom 70% carried ≥1 DRM and 49% had dual-class resistance, with an average of 2.4 DRMs per sequence (range, 1-8). The most common DRMs were M184V (53.5%), K103N (28.9%), Y181C (15.5%), and G190A (14.1%). Thymidine analogue mutations were present in 8.5%. K65R was frequently selected by stavudine (15.0%) or tenofovir (27.7%). Among participants with ≥1 DRM, HIV-1 susceptibility was reduced in 93% for efavirenz/nevirapine, in 81% for lamivudine/emtricitabine, in 59% for etravirine/rilpivirine, in 27% for tenofovir, in 18% for stavudine, and in 10% for zidovudine. Early failure detection limited the accumulation of resistance. After stavudine failure in African populations, zidovudine rather than tenofovir may be preferred in second-line ART. Strategies to prevent HIV-1 resistance are a global priority.

  16. EN FACE VERSUS 12-LINE RADIAL OPTICAL COHERENCE TOMOGRAPHY SCAN PATTERNS FOR DETECTION OF MACULAR FLUID IN NEOVASCULAR AGE-RELATED MACULAR DEGENERATION.

    Science.gov (United States)

    Adam, Murtaza K; Shahlaee, Abtin; Samara, Wasim A; Maguire, Joseph I; Ho, Allen C; Hsu, Jason

    2017-08-14

    To compare fluid detection of autosegmented en face to 12-line radial spectral domain optical coherence tomography scan patterns in neovascular age-related macular degeneration. Retrospective observational case series. Sixty-seven patients (94 eyes) with neovascular age-related macular degeneration underwent autosegmented en face optical coherence tomography (with associated 304-line raster scan) and 12-line radial scan patterns. Sensitivity and specificity of fluid detection for en face scan and 12-line radial scans were determined by combining radial and 304-line raster scans as a gold standard. Two hundred and fifty-eight en face and 12-line radial spectral domain optical coherence tomography scans were interpreted. Seventy-five scans (58.1%) had fluid, whereas 54 scans (41.9%) did not. En face scan pattern fluid detection sensitivity and specificity was 89.3% and 61.1%, respectively. Twelve-line radial scan pattern fluid detection sensitivity and specificity was 97.3% and 100%, respectively. The difference in fluid detection between scan patterns was statistically significant (P = 0.01). Decreased central macular thickness was associated with false-positive (P = 0.035) and false-negative (P = 0.01) fluid detection on en face scans. En face optical coherence tomography alone is not as sensitive or specific as the 12-line radial scan pattern in detecting fluid in neovascular age-related macular degeneration. En face scans should be corroborated with other optical coherence tomography protocols to guide clinical decision making.

  17. Thermo-electric oxidization of iron in lithium niobate crystals

    International Nuclear Information System (INIS)

    Falk, Matthias

    2007-01-01

    Lithium niobate crystals (LiNbO 3 ) are a promising material for nonlinear-optical applications like frequency conversion to generate visible light, e.g., in laser displays, but their achievable output power is greatly limited by the ''optical damage'', i.e., light-induced refractive-index changes caused by excitation of electrons from iron impurities and the subsequent retrapping in unilluminated areas of the crystal. The resulting space-charge fields modify the refractive indices due to the electro-optic effect. By this ''photorefractive effect'' the phase-matching condition, i.e., the avoidance of destructive interference between light generated at different crystal positions due to the dispersion of the fundamental wave and the converted wave, is disturbed critically above a certain light intensity threshold. The influence of annealing treatments conducted in the presence of an externally applied electric field (''thermo-electric oxidization'') on the valence state of iron impurities and thereby on the optical damage is investigated. It is observed that for highly iron-doped LiNbO 3 crystals this treatment leads to a nearly complete oxidization from Fe 2+ to Fe 3+ indicated by the disappearance of the absorption caused by Fe 2+ . During the treatment an absorption front forms that moves through the crystal. The absorption in the visible as well as the electrical conductivity are decreased by up to five orders of magnitude due to this novel treatment. The ratio of the Fe 2+ concentration to the total iron concentration - a measure for the strength of the oxidization - is in the order of 10 -6 for oxidized crystals whereas it is about 10 -1 for untreated samples. Birefringence changes are observed at the absorption front that are explained by the removal of hydrogen and lithium ions from the crystal that compensate for the charges of the also removed electrons from Fe 2+ . A microscopic shock-wave model is developed that explains the observed absorption front by

  18. Seasonal Patterns of Melatonin, Cortisol, and Progesterone Secretion in Female Lambs Raised Beneath a 500-KV Transmission Line

    Science.gov (United States)

    Lee, Jack Monroe, Jr.

    There is ongoing controversy about the possibility of adverse biological effects from environmental exposures to electric and magnetic fields. These fields are produced by all electrical equipment and appliances including electrical transmission lines. The objective of this environmental science study was to investigate the possible effects of a high voltage transmission line on domestic sheep (Ovis aries L.), a species that can often be found near such lines. The study was primarily designed to determine whether a specific effect of electric and magnetic fields found in laboratory animals also occurs in livestock under natural environmental conditions. The effect is the ability of fields, at levels found in the environment, to significantly depress the normally high nocturnal concentrations of the pineal hormone-melatonin. Ten female Suffolk lambs were penned for 10 months directly beneath a 500-kV transmission line near Estacada, Oregon. Ten other lambs of the same type were penned in a control area away from the transmission line where electric and magnetic fields were at ambient levels. Serum melatonin was analyzed by radioimmunoassay (RIA) from 6618 blood samples collected at 0.5 to 3-hour intervals over eight 48-hour periods. Serum progesterone was analyzed by RIA from blood samples collected twice weekly. Serum cortisol was also assayed by RIA from the blood samples collected during the 48-hour samples. Results showed that lambs in both the control and line groups had the typical pattern of melatonin secretion consisting of low daytime and high nighttime serum concentrations. There were no statistically significant differences between groups in melatonin levels, or in the phase or duration of the nighttime melatonin elevation. Age at puberty and number of reproductive cycles also did not differ between groups. Serum cortisol showed a circadian rhythm with highest concentrations during the day. There were, however, no differences in cortisol concentrations

  19. Patterns and determinants of new first-line antihyperglycaemic drug use in patients with type 2 diabetes mellitus.

    Science.gov (United States)

    Geier, A S; Wellmann, I; Wellmann, J; Kajüter, H; Heidinger, O; Hempel, G; Hense, H W

    2014-10-01

    We evaluated the patterns and determinants that influence the selection, timing and duration of first-line antihyperglycaemic drug (AHD) treatment in patients with type 2 diabetes in Germany, focusing specifically on treatment-naive AHD initiators. Pharmacy dispensing claims data were linked with a cohort of patients newly enrolled in a German Disease Management Program for type 2 diabetes (DMP-DM2) between 2003 and 2009. We examined uptake of first-line pharmacotherapy in previously unmedicated patients and identified predictors of receiving AHD therapy in general and metformin in particular using multivariable regression analyses. There were 27,138 unmedicated patients with type 2 diabetes and 47.0% of them were started on AHD treatment within 5 years after enrollment. Initial severity of diabetes was the major predictor of receiving first-line pharmacotherapy. Metformin accounted for 63% of newly prescribed AHD in 2003 and more than 80% in 2009 while sulfonylureas accounted for only 10%. Initiating metformin as first-line AHD was associated with younger age, higher BMI, lower HbA1c, and shorter diabetes duration (multivariate p<0.001 for all). Therapy switch or step-up was less frequent among metformin initiators than sulfonylurea initiators. The majority of patients were not started on AHD therapy within 5 years after enrollment. In line with recent therapy guidelines, current first-line antihyperglycaemic treatment was increasingly based on metformin. AHD initiators started on sulfonylurea were generally more advanced in their disease and were started later on primary pharmacotherapy. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  20. Spatio Temporal Expression Pattern of an Insecticidal Gene (cry2A in Transgenic Cotton Lines

    Directory of Open Access Journals (Sweden)

    Allah BAKHSH

    2012-11-01

    Full Text Available The production of transgenic plants with stable, high-level transgene expression is important for the success of crop improvement programs based on genetic engineering. The present study was conducted to evaluate genomic integration and spatio temporal expression of an insecticidal gene (cry2A in pre-existing transgenic lines of cotton. Genomic integration of cry2A was evaluated using various molecular approaches. The expression levels of cry2A were determined at vegetative and reproductive stages of cotton at regular intervals. These lines showed a stable integration of insecticidal gene in advance lines of transgenic cotton whereas gene expression was found variable with at various growth stages as well as in different plant parts throughout the season. The leaves of transgenic cotton were found to have maximum expression of cry2A gene followed by squares, bolls, anthers and petals. The protein level in fruiting part was less as compared to other parts showing inconsistency in gene expression. It was concluded that for culturing of transgenic crops, strategies should be developed to ensure the foreign genes expression efficient, consistent and in a predictable manner.

  1. Matched filtering Generalized Phase Contrast using binary phase for dynamic spot- and line patterns in biophotonics and structured lighting.

    Science.gov (United States)

    Bañas, Andrew; Aabo, Thomas; Palima, Darwin; Glückstad, Jesper

    2013-01-28

    This work discusses the use of matched filtering Generalized Phase Contrast (mGPC) as an efficient and cost-effective beam shaper for applications such as in biophotonics, optical micromanipulation, microscopy and two-photon polymerization. The theoretical foundation of mGPC is described as a combination of Generalized Phase Contrast and phase-only correlation. Such an analysis makes it convenient to optimize an mGPC system for different setup conditions. Results showing binary-only phase generation of dynamic spot arrays and line patterns are presented.

  2. Matched filtering Generalized Phase Contrast using binary phase for dynamic spot- and line patterns in biophotonics and structured lighting

    DEFF Research Database (Denmark)

    Bañas, Andrew Rafael; Aabo, Thomas; Palima, Darwin

    2013-01-01

    as a combination of Generalized Phase Contrast and phase-only correlation. Such an analysis makes it convenient to optimize an mGPC system for different setup conditions. Results showing binary-only phase generation of dynamic spot arrays and line patterns are presented. © 201 Optical Society of America......This work discusses the use of matched filtering Generalized Phase Contrast (mGPC) as an efficient and cost-effective beam shaper for applications such as in biophotonics, optical micromanipulation, microscopy and two-photon polymerization. The theoretical foundation of mGPC is described...

  3. Propagation of light in the lithium niobate crystal along directions close to an optical axis

    International Nuclear Information System (INIS)

    Volkov, V.V.; Egorova, G.A.; Lonskij, Eh.S.; Potapov, E.V.; Rakov, A.V.

    1978-01-01

    Theoretical and experimental results are given of studying some characteristics of electrooptical modulator from lithium niobate when propagating in it linear-polarized light in directions close to the optical axis, the electric field being applied along the X axis. It has been shown that an increase in an angle of deviation from the optical axis of a light beam passing in the crystal changes the value of the controlling voltage. This is accompanied by the rotation of the polarization plane and the change in the intensity of the light being passed. The methods have been proposed of increasing the modulator aperture, determining the main refraction indices and some electrooptical coefficients fo the lithium niobate crystal

  4. Annealed proton exchanged optical waveguides in lithium niobate differences between the X- and Z-cuts

    CERN Document Server

    Nekvindova, P; Cervena, J; Budnar, M; Razpet, A; Zorko, B; Pelicon, P; 10.1016/S0925-3467(01)00186-0

    2002-01-01

    Summarizes results and assessments of our systematic fabrication and characterization of proton exchanged (PE) and annealed proton exchanged (APE) waveguides in lithium niobate. This study focused on different behavior of crystallographically diverse X(1120) and Z (0001) substrate cuts during waveguide fabrication, and differences in characteristics of the resulting waveguides. Non-toxic adipic acid was used as a proton source, and the waveguides properties were defined by mode spectroscopy (waveguide characteristics) and neutron depth profiling (NDP, lithium concentration and distribution), infrared vibration spectra and elastic recoil detection analysis (ERDA, concentration and depth distribution of hydrogen). It was discovered that the X-cut structure is more permeable for moving particles (lithium and hydrogen ions), which leads to a higher effectiveness of the PE process within the X-cut. The explanation of this phenomenon is based on fitting X-cut orientation towards cleavage planes of lithium niobate c...

  5. Origin of light-deflection in lithium niobate and lithium tantalate under electric field.

    Science.gov (United States)

    Guilbert, Laurent

    2009-06-22

    The deflection of light reported by Müller et al. in lithium niobate [Appl. Phys. B 78, 367-370] and lithium tantalate [Appl. Optics 43 (34), 6344-6347] under electric field originates from refraction at domain-walls, like in ferroelastics. In ferroelectrics the optical discontinuity takes place at domain-walls as a consequence of the electro-optic effect. The theoretical deflection angle calculated from Snell's law is proportional to the square root of the electric field and matches the experimental results reported by Müller et al. for lithium niobate. The finite domain-wall thickness mentioned by the authors is not involved in the deflection phenomenon.

  6. Patterns of Signs That Telephone Crisis Support Workers Associate with Suicide Risk in Telephone Crisis Line Callers

    Directory of Open Access Journals (Sweden)

    Tara Hunt

    2018-01-01

    Full Text Available Signs of suicide are commonly used in suicide intervention training to assist the identification of those at imminent risk for suicide. Signs of suicide may be particularly important to telephone crisis-line workers (TCWs, who have little background information to identify the presence of suicidality if the caller is unable or unwilling to express suicidal intent. Although signs of suicide are argued to be only meaningful as a pattern, there is a paucity of research that has examined whether TCWs use patterns of signs to decide whether a caller might be suicidal, and whether these are influenced by caller characteristics such as gender. The current study explored both possibilities. Data were collected using an online self-report survey in a Australian sample of 137 TCWs. Exploratory factor analysis uncovered three patterns of suicide signs that TCWs may use to identify if a caller might be at risk for suicide (mood, hopelessness, and anger, which were qualitatively different for male and female callers. These findings suggest that TCWs may recognise specific patterns of signs to identify suicide risk, which appear to be influenced to some extent by the callers’ inferred gender. Implications for the training of telephone crisis workers and others including mental-health and medical professionals, as well as and future research in suicide prevention are discussed.

  7. Printing line/space patterns on nonplanar substrates using a digital micromirror device-based point-array scanning technique

    Science.gov (United States)

    Kuo, Hung-Fei; Kao, Guan-Hsuan; Zhu, Liang-Xiu; Hung, Kuo-Shu; Lin, Yu-Hsin

    2018-02-01

    This study used a digital micromirror device (DMD) to produce point-array patterns and employed a self-developed optical system to define line-and-space patterns on nonplanar substrates. First, field tracing was employed to analyze the aerial images of the lithographic system, which comprised an optical system and the DMD. Multiobjective particle swarm optimization was then applied to determine the spot overlapping rate used. The objective functions were set to minimize linewidth and maximize image log slope, through which the dose of the exposure agent could be effectively controlled and the quality of the nonplanar lithography could be enhanced. Laser beams with 405-nm wavelength were employed as the light source. Silicon substrates coated with photoresist were placed on a nonplanar translation stage. The DMD was used to produce lithographic patterns, during which the parameters were analyzed and optimized. The optimal delay time-sequence combinations were used to scan images of the patterns. Finally, an exposure linewidth of less than 10 μm was successfully achieved using the nonplanar lithographic process.

  8. Patterns of Signs That Telephone Crisis Support Workers Associate with Suicide Risk in Telephone Crisis Line Callers.

    Science.gov (United States)

    Hunt, Tara; Wilson, Coralie; Caputi, Peter; Wilson, Ian; Woodward, Alan

    2018-01-30

    Signs of suicide are commonly used in suicide intervention training to assist the identification of those at imminent risk for suicide. Signs of suicide may be particularly important to telephone crisis-line workers (TCWs), who have little background information to identify the presence of suicidality if the caller is unable or unwilling to express suicidal intent. Although signs of suicide are argued to be only meaningful as a pattern, there is a paucity of research that has examined whether TCWs use patterns of signs to decide whether a caller might be suicidal, and whether these are influenced by caller characteristics such as gender. The current study explored both possibilities. Data were collected using an online self-report survey in a Australian sample of 137 TCWs. Exploratory factor analysis uncovered three patterns of suicide signs that TCWs may use to identify if a caller might be at risk for suicide (mood, hopelessness, and anger), which were qualitatively different for male and female callers. These findings suggest that TCWs may recognise specific patterns of signs to identify suicide risk, which appear to be influenced to some extent by the callers' inferred gender. Implications for the training of telephone crisis workers and others including mental-health and medical professionals, as well as and future research in suicide prevention are discussed.

  9. Micro- and nanostructuration of lithium niobate; Mikro- und Nanostrukturierung von Lithiumniobat

    Energy Technology Data Exchange (ETDEWEB)

    Hartung, Holger

    2010-04-13

    In the framework of this thesis the application of the ion-beam-enhanced-etching (IBEE) technique for the fabrication of different optical elements, among these photonic crystals, in lithium niobate, was studied. The development of a mask technology fitted to the requirements of the IBEE technique as well as a simulation of the process were performed. Hereby the limitations of the technique in view on minimal structure sizes and structure quality were analyzed. In chapter 1 first the material lithium niobate with its properties and the structuration procedures studied hitherto in the literature is presented. Chapter 2 presents the functionality of the IBEE process and describes the studies on the application of IBEE in lithium niobate performed in the framework of this thesis. In chapter 3 the experimental conditions of all applied processes of the IBEE procedure, the processes used for the mask fabrication, as well all further applied methods and technologies are summarized. Chapter 4 deals with the mask fabrication. The requirements on the masks and the developments necessary for their fulfilment are studied. In chapter 5 the performed simulation of the irradiation, annealing, and etching process is described. This simulation makes the prediciton of the geometry of the components from the process parameters and vice versa the determination of parameters for the reaching of an optimal element geometry possible. In chapter 6 the application of the technique for the fabrication of photonic-crystal membranes and their optical characterization is described. Chapter 7 shows the fabrication of different waveguide and diffractive elements in lithium niobate by means of IBEE.

  10. Temperature dependence of the thermoelectric coeffiicients of lithium niobate and lithium tantalate

    International Nuclear Information System (INIS)

    Khachaturyan, O.A.; Gabrielyan, A.I.; Kolesnik, S.P.

    1988-01-01

    Thermoelectric Zeebeck,Thomson, Peltier coefficients for LiNbO 3 and LiTaO 3 monocrystals and their dependence on temperature in 300-1400 K range were investigated. It is shown that Zeebeck (α) coefficient changes its sign, depending on temperature change - the higher is α, the higher is material conductivity in the corresponding temperature region. Thomson and Peltier coefficients were calculated analytically for lithium niobate and tantalate

  11. Scanning electron microscope measurement of width and shape of 10nm patterned lines using a JMONSEL-modeled library.

    Science.gov (United States)

    Villarrubia, J S; Vladár, A E; Ming, B; Kline, R J; Sunday, D F; Chawla, J S; List, S

    2015-07-01

    The width and shape of 10nm to 12 nm wide lithographically patterned SiO2 lines were measured in the scanning electron microscope by fitting the measured intensity vs. position to a physics-based model in which the lines' widths and shapes are parameters. The approximately 32 nm pitch sample was patterned at Intel using a state-of-the-art pitch quartering process. Their narrow widths and asymmetrical shapes are representative of near-future generation transistor gates. These pose a challenge: the narrowness because electrons landing near one edge may scatter out of the other, so that the intensity profile at each edge becomes width-dependent, and the asymmetry because the shape requires more parameters to describe and measure. Modeling was performed by JMONSEL (Java Monte Carlo Simulation of Secondary Electrons), which produces a predicted yield vs. position for a given sample shape and composition. The simulator produces a library of predicted profiles for varying sample geometry. Shape parameter values are adjusted until interpolation of the library with those values best matches the measured image. Profiles thereby determined agreed with those determined by transmission electron microscopy and critical dimension small-angle x-ray scattering to better than 1 nm. Published by Elsevier B.V.

  12. Seasonal Patterns of Melatonin, Cortisol, and Progesterone Secretion in Female Lambs Raised Beneath a 500-kV Transmission Line.

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jack M.

    1992-06-01

    Although several kinds of biological effects of electric and magnetic fields have been reported from laboratory studies, few have been independently replicated. When this study was being planned, the suppression of nighttime melatonin in rodents was thought to represent one of the strongest known effects of these fields. The effect had been replicated by a single laboratory for 60-Hz electric fields, and by multiple laboratories for d-c magnetic fields. The primary objective of this study was to determine whether the effect of electric and magnetic fields on melatonin would also occur in sheep exposed to a high voltage transmission line. The specific hypothesis tested by this experiment was as follows: The electrical environment produced by a 60-Hz, 500-kV transmission line causes a depression in nocturnal melatonin in chronically exposed female lambs. This may mimic effects of pinealectomy or constant long-day photoperiods, thus delaying the onset of reproductive cycles. Results of the study do not provide evidence to support the hypothesis. Melatonin concentrations in the sheep exposed to the transmission line showed the normal pattern of low daytime and high nighttime serum levels. As compared to the control group, there were no statistically significant group differences in the mean amplitude, phase, or duration of the nighttime melatonin elevation.

  13. Closely related glycosylation patterns of recombinant human IL-2 expressed in a CHO cell line and natural IL-2

    International Nuclear Information System (INIS)

    Vita, N.; Magazin, M.; Marchese, E.; Lupker, J.; Ferrara, P.

    1990-01-01

    We report here the study of the glycosylation pattern of human recombinant (r) IL2 expressed in a Chinese hamster ovary (CHO) cell line. The human rIL2 secreted by this high-producing recombinant CHO cell line was metabolically radiolabelled with [35S]-methionine, or with [3H]-glucosamine and [3H]-galactose, purified to homogeneity, and then characterized. The electrophoretic analysis of the [35S]-methionine-labelled proteins present in the culture medium of the CHO cell line showed that the rIL2 represents approximately 12% of the total secreted proteins. Furthermore, pulse-chase experiments showed that the glycosylated rIL2 is synthesized and secreted within 30 min. The point of attachment and the structure of the carbohydrate moiety of the rIL2 was determined by: amino-terminal sequencing and fingerprint analysis of the 3H-labelled rIL2, mass spectroscopy of the amino-terminal tryptic octapeptide, and carbohydrate analysis after enzymatic (Vibrio cholerae neuraminidase and Aspergillus oryzae beta-galactosidase) or sulfuric acid hydrolysis. The results indicate that the recombinant protein possesses a sugar moiety O-linked to the threonine residue at position 3 of the polypeptide chain, and that sialic acid, galactose and N-acetyl galactosamine are components of this carbohydrate moiety. Taken together these results suggest that the recombinant molecule is identical to natural IL2

  14. Extrinsic Parameter Calibration for Line Scanning Cameras on Ground Vehicles with Navigation Systems Using a Calibration Pattern

    Directory of Open Access Journals (Sweden)

    Alexander Wendel

    2017-10-01

    Full Text Available Line scanning cameras, which capture only a single line of pixels, have been increasingly used in ground based mobile or robotic platforms. In applications where it is advantageous to directly georeference the camera data to world coordinates, an accurate estimate of the camera’s 6D pose is required. This paper focuses on the common case where a mobile platform is equipped with a rigidly mounted line scanning camera, whose pose is unknown, and a navigation system providing vehicle body pose estimates. We propose a novel method that estimates the camera’s pose relative to the navigation system. The approach involves imaging and manually labelling a calibration pattern with distinctly identifiable points, triangulating these points from camera and navigation system data and reprojecting them in order to compute a likelihood, which is maximised to estimate the 6D camera pose. Additionally, a Markov Chain Monte Carlo (MCMC algorithm is used to estimate the uncertainty of the offset. Tested on two different platforms, the method was able to estimate the pose to within 0.06 m/1.05 ∘ and 0.18 m/2.39 ∘ . We also propose several approaches to displaying and interpreting the 6D results in a human readable way.

  15. Health information exchange technology on the front lines of healthcare: workflow factors and patterns of use

    Science.gov (United States)

    Johnson, Kevin B; Lorenzi, Nancy M

    2011-01-01

    Objective The goal of this study was to develop an in-depth understanding of how a health information exchange (HIE) fits into clinical workflow at multiple clinical sites. Materials and Methods The ethnographic qualitative study was conducted over a 9-month period in six emergency departments (ED) and eight ambulatory clinics in Memphis, Tennessee, USA. Data were collected using direct observation, informal interviews during observation, and formal semi-structured interviews. The authors observed for over 180 h, during which providers used the exchange 130 times. Results HIE-related workflow was modeled for each ED site and ambulatory clinic group and substantial site-to-site workflow differences were identified. Common patterns in HIE-related workflow were also identified across all sites, leading to the development of two role-based workflow models: nurse based and physician based. The workflow elements framework was applied to the two role-based patterns. An in-depth description was developed of how providers integrated HIE into existing clinical workflow, including prompts for HIE use. Discussion Workflow differed substantially among sites, but two general role-based HIE usage models were identified. Although providers used HIE to improve continuity of patient care, patient–provider trust played a significant role. Types of information retrieved related to roles, with nurses seeking to retrieve recent hospitalization data and more open-ended usage by nurse practitioners and physicians. User and role-specific customization to accommodate differences in workflow and information needs may increase the adoption and use of HIE. Conclusion Understanding end users' perspectives towards HIE technology is crucial to the long-term success of HIE. By applying qualitative methods, an in-depth understanding of HIE usage was developed. PMID:22003156

  16. Somatic cell hybrids between human lymphoma lines. II. Spontaneous and induced patterns of the Epstein-Barr virus (EBV) cycle.

    Science.gov (United States)

    Klein, G; Clements, G; Zeuthen, J; Westman, A

    1976-06-15

    The regulation of spontaneous, IUDR-induced and P3HR-1 virus-induced EA and VCA production patterns was studied in two new somatic hybrids between human lymphoma lines. The hybrid 8A was derived from the crossing of the non-producer Raji with the spontaneous producer Daudi line. The second hybrid, 83, was produced by the fusion of Raji with the EBV-genome-negative B-lymphoma line, BJAB. The studies suggest the following EBV regulation patterns: (1) the spontaneous production of EA and VCA appears to be regulated by controls that differ from the regulators of P3HR-1 virus-induced or IUDR-induced EA synthesis. While spontaneous producer status was dominant over non-producer status, the level of EA inducibility was set by one of the parental cells, Raji ATG, and could either raise (in the previously studied Raji/Namalwa hybrid, cf Nyormoi et al. 1973) or depress (in Raji/Daudi) the level of relative EA inducibility found in the partner cell. (2) Although EA production is a prerequisite for VCA synthesis, the latter is under its own restriction mechanisms, quite independent of those that regulate the level of EA synthesis. (3) Inducibility of EA synthesis by P3HR-1 virus and by IUDR appear to be under the influence of at least partially identical controls. (4) EBV-negative lymphoma cells, exemplified by BJAB, may exert a "complementation" effect on the EA inducibility of their EBV-positive fusion partner, in spite of their own restrictivity against virus-induced EA synthesis. In more general terms, it is obvious that the EBV cycle is under the influence of multiple regulatory mechanisms in the human lymphoid cell. Depending on the parental cell and viral genomes that are allowed to interact, somatic cell hybrids may display a variety of patterns. At this time, cell hybridization is one of the few pathways that permit an approach to this complex and completely unknown world.

  17. Computational fluid dynamics modeling patterns and force characteristics of flow over in-line four square cylinders

    Directory of Open Access Journals (Sweden)

    Song Yidan

    2017-01-01

    Full Text Available The flow over four square cylinders in an in-line, square arrangement was numerically investigated by using the finite volume method with CFD techniques. The working fluid is an incompressible ideal gas. The length of the sides of the array, L, is equal. The analysis is carried out for a Reynolds number of 300, with center-to-center distance ratios, L/D, ranging from 1.5 to 8.0. To fully understand the flow mechanism, details in terms of lift and drag coefficients and Strouhal numbers of the unsteady wake frequencies are analyzed, and the vortex shedding patterns around the four square cylinders are described. It is concluded that L/D has important effects on the drag and lift coefficients, vortex shedding frequencies, and flow field characteristics.

  18. Sensitivity Pattern of Second Line Anti-Tuberculosis Drugs against Clinical Isolates of Multidrug Resistant Mycobacterium Tuberculosis

    International Nuclear Information System (INIS)

    Ghafoor, T.; Ikram, A.; Abbasi, S. A.; Zaman, G.; Ayyub, M.; Palomino, J. C.; Vandamme, P.; Martin, A.

    2015-01-01

    Objective:To determine the current sensitivity pattern of second line anti-tuberculosis drugs against clinical isolates of Multidrug Resistant Mycobacterium tuberculosis (MDR-TB). Study Design: A cross-sectional study. Place and Duration of Study: Department of Microbiology, Armed Forces Institute of Pathology (AFIP), Rawalpindi, from November 2011 to April 2013. Methodology: Samples received during the study period were processed on BACTEC MGIT 960 system for Mycobacterium tuberculosis (MTB) culture followed by first line drugs susceptibility testing of culture proven MTB isolates. On the basis of resistance to rifampicin and isoniazid, 100 clinical isolates of MDR-TB were further subjected to susceptibility testing against amikacin (AMK), capreomycin (CAP), ofloxacin (OFL) and ethionamide (ETH) as per standard BACTEC MGIT 960 instructions. Results: Out of 100 MDR-TB isolates, 62% were from male patients and 38% from female patients. 97% were sensitive to AMK, 53% to OFL, 87% to CAP; and 87% were sensitive to ETH. Conclusion: The majority of the MDR-TB isolates showed excellent sensitivity against AMK, CAP and ETH. However, sensitivity of MDR-TB isolates against fluoroquinolones like OFL was not encouraging. (author)

  19. Heavy metal incorporated helium ion active hybrid non-chemically amplified resists: Nano-patterning with low line edge roughness

    Science.gov (United States)

    Reddy, Pulikanti Guruprasad; Thakur, Neha; Lee, Chien-Lin; Chien, Sheng-Wei; Pradeep, Chullikkattil P.; Ghosh, Subrata; Tsai, Kuen-Yu; Gonsalves, Kenneth E.

    2017-08-01

    Helium (He) ion lithography is being considered as one of the most promising and emerging technology for the manufacturing of next generation integrated circuits (ICs) at nanolevel. However, He-ion active resists are rarely reported. In this context, we are introducing a new non-chemically amplified hybrid resist (n-CAR), MAPDSA-MAPDST, for high resolution He-ion beam lithography (HBL) applications. In the resist architecture, 2.15 % antimony is incorporated as heavy metal in the form of antimonate. This newly developed resists has successfully used for patterning 20 nm negative tone features at a dose of 60 μC/cm2. The resist offered very low line edge roughness (1.27±0.31 nm) for 20 nm line features. To our knowledge, this is the first He-ion active hybrid resist for nanopatterning. The contrast (γ) and sensitivity (E0) of this resist were calculated from the contrast curve as 0.73 and 7.2 μC/cm2, respectively.

  20. On-line determination of the grain angle using ellipse analysis of the laser light scattering pattern image

    International Nuclear Information System (INIS)

    Hu, C.; Tanaka, C.; Ohtani, T.

    2004-01-01

    Under fixed cutting conditions, the surface finish roughness is correlated to the grain angle. However, the means of determining the grain angle automatically and accurately is still a challenge for on-line control of the router. It is therefore necessary to develop a new technology to determine the grain angle accurately and automatically. In this research, a laser light scattering pattern was used to accurately determine the grain angle. The light scattering pattern image was a quasi-ellipse caused by the grain direction and tracheid effect. A new modified Hough transform ellipse analysis technology was adopted to determine the ellipse parameters that could be used to determine the grain angle. The results indicated that the measured grain angle using the method proposed here was accurate and effective. The measured gain angle coincided with the real grain angle. There was an insignificant difference between the measured grain angle of Japanese beech (Fagus crenata blume) and that of sugi (Cryptomeria japonica D.Don) under two machining conditions that gave planed or sawn finishes. However, the accuracy of the measured grain angle of sugi was better than that of Japanese beech for the planed finish, the accuracy of the measured grain angle of Japanese beech was better than that of sugi for the sawn finish, and the accuracy of the measured grain angle for planed samples was better than that for sawn samples of both sugi and Japanese beech

  1. Fine Adhesion Patterning and Aligned Nuclei Orientation of Mesenchymal Stem Cell on Narrow Line-Width of Silicone Rubber Implanted by Carbon Negative Ions

    Science.gov (United States)

    Sommani, Piyanuch; Tsuji, Hiroshi; Sato, Hiroko; Gotoh, Yasuhito; Ishikawa, Junzo; Takaoka, Gikan H.

    Fine cell-adhesion patterning and nuclei orientation control on silicone rubber were investigated by limiting line-width of carbon negative-ion implantation. The ions were implanted at 3×1015 ions/cm2 and 10 keV through masks of ridge-pattern and rectangle-pattern with various slit apertures of 0-40 μm in width. After 2 days culture, nuclei of rat mesenchymal stem cells were stained with fluorescent dye to evaluate the nuclei positions at each tip ridge-region and the relative angles between the major axis of ellipse-shape nuclei and the implanted line-region. Results showed the individual nucleus arrangement along the narrow line-widths of 3-12 μm and the gathered one on the wider line-width. Number of nuclei orientation in the angle range of 0°-10° increased to 79% on the line-width of 10 μm. As a result, the fine cell-adhesion patterning and nuclei orientation could be achieved by decreasing the implanted line-width to 10 μm.

  2. Ultrashort pulse chirp measurement via transverse second-harmonic generation in strontium barium niobate crystal

    International Nuclear Information System (INIS)

    Trull, J.; Wang, B.; Parra, A.; Vilaseca, R.; Cojocaru, C.; Sola, I.; Krolikowski, W.; Sheng, Y.

    2015-01-01

    Pulse compression in dispersive strontium barium niobate crystal with a random size and distribution of the anti-parallel orientated nonlinear domains is observed via transverse second harmonic generation. The dependence of the transverse width of the second harmonic trace along the propagation direction allows for the determination of the initial chirp and duration of pulses in the femtosecond regime. This technique permits a real-time analysis of the pulse evolution and facilitates fast in-situ correction of pulse chirp acquired in the propagation through an optical system

  3. Processing and characterization of lead-free ceramics on the base of sodium-potassium niobate

    Science.gov (United States)

    Politova, E. D.; Golubko, N. V.; Kaleva, G. M.; Mosunov, A. V.; Sadovskaya, N. V.; Stefanovich, S. Yu.; Kiselev, D. A.; Kislyuk, A. M.; Panda, P. K.

    Lead-free sodium-potassium niobate-based piezoelectric materials are most intensively studied in order to replace the widely used Pb-based ones. In this work, the effects of modification of compositions by donor and acceptor dopants in the A- and B-sites of perovskite lattice on structure, dielectric, ferroelectric, and piezoelectric properties of ceramics from Morphotropic Phase Boundary in the (1-x)(K0.5Na0.5)NbO3-xBaTiO3 system and in compositions with x=0.05 and 0.06 additionally doped by Ni3+ cations have been studied.

  4. Aperture scaling effects with monolithic periodically poled lithium niobate optical parametric oscillators and generators.

    Science.gov (United States)

    Missey, M; Dominic, V; Powers, P; Schepler, K L

    2000-02-15

    We used elliptical beams to demonstrate aperture scaling effects in nanosecond single-grating and multigrating periodically poled lithium niobate (PPLN) monolithic optical parametric oscillators and generators. Increasing the cavity Fresnel number in single-grating crystals broadened both the beam divergence and the spectral bandwidth. Both effects are explained in terms of the phase-matching geometry. These effects are suppressed when a multigrating PPLN crystal is used because the individual gratings provide small effective subapertures. A flood-pumped multigrating optical parametric generator displayed a low output beam divergence and contained 19 pairs of signal and idler frequencies.

  5. Electret-based Unsteady Thermal Energy Harvester using Potassium Tantalate Niobate Crystal

    Science.gov (United States)

    Xie, Hong; Morimoto, Kenichi; Suzuki, Yuji

    2016-11-01

    An electret-based unsteady thermal energy harvester is proposed using potassium tantalate niobate (KTa1-xNbxO3, KTN) as a dielectric for the capacitor. By connecting in series the capacitor and an electret serving as a permanent voltage source, the capacitance change with temperature fluctuations alters the amount of induced charges thereby produces the external current. By using KTN having extremely-large temperature coefficient of permittivity together with the CYTOP electret, the output power of 572 nJ has been obtained from one heating cycle, which corresponds to 20 times higher output power than the previous result with BaTiO3.

  6. Structural, topographical and electrical properties of cerium doped strontium barium niobate (Ce:SBN60) ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Raj, S. Gokul [Department of Physics, C. Kandaswami Naidu College For Men (CKNC), Annanagar, Chennai-600102 (India); Mathivanan, V.; Mohan, R. [Department of Physics, Presidency College, Chennai – 600005 (India); Kumar, G. Ramesh, E-mail: rameshvandhai@gmail.com; Yathavan, S. [Department of Physics, University College of Engineering Arni, Anna University Chennai, Arni-632317 (India)

    2016-05-06

    Tungsten bronze type cerium doped strontium barium niobate (Ce:SBN - Sr{sub 0.6}B{sub 0.4}Nb{sub 2}O{sub 6}) ceramics were synthesized by solid state process. Cerium was used as dopant to improve its electrical properties. Influence of Ce{sup +} ions on the photoluminescence properties was investigated in detail. The grain size topographical behavior of SBN powders and their associated abnormal grain growth (AGG) were completely analyzed through SEM studies. Finally dielectric, measurement discusses about the broad phase transition observed due to cerium dopant The results were discussed in detail.

  7. Preparation and photocatalytic property of potassium niobate K6Nb10.8O30

    International Nuclear Information System (INIS)

    Zhang Gaoke; Zou Xi; Gong Jie; He Fangsheng; Zhang Hao; Zhang Qiang; Liu Ying; Yang Xia; Hu Bo

    2006-01-01

    The TB-type potassium niobate K 6 Nb 10.8 O 30 was synthesized by a simple solid-state reaction method. Scanning electron microscope (SEM) and X-ray diffractometer (XRD) were used to characterize the structure of the photocatalyst. The photocatalyst K 6 Nb 10.8 O 30 shows high photocatalytic activity to photodegrade acid red G under UV irradiation. The influences of catalyst dosage, initial concentration of acid red G on the photocatalytic reaction were investigated. The kinetics of photocatalytic degradation of acid red G follows the first order kinetics

  8. Control of coercive field in lithium niobate crystals with repeated polarization reversal

    International Nuclear Information System (INIS)

    Ro, Jung Hoon; Jeong, Doun; Park, Taeyong; Kim, Chulhan; Kwon, Soon-Bok; Cha, Myoungsik; Choi, Byeong Cheol; Yu, Nanei; Kurimura, Sunao; Jeon, Gyerok

    2005-01-01

    In this study, the amount of decrease in coercive field of congruent lithium niobate during repeated poling and back-poling was measured. The polarization is reversed in 300 ms and then back-poled during the rest period. The coercive field can be decreased around 1 kV/mm with a repeated poling interval of 5 s. As the interval prolonged, the poling field decrease became smaller, and a stretched exponential function is suggested for the experimental fitting resulting in a set of meaningful parameters. These values are essential for the design of high quality domain engineering

  9. Differential stress-induced neuronal activation patterns in mouse lines selectively bred for high, normal or low anxiety.

    Directory of Open Access Journals (Sweden)

    Patrik Muigg

    Full Text Available There is evidence for a disturbed perception and processing of emotional information in pathological anxiety. Using a rat model of trait anxiety generated by selective breeding, we previously revealed differences in challenge-induced neuronal activation in fear/anxiety-related brain areas between high (HAB and low (LAB anxiety rats. To confirm whether findings generalize to other species, we used the corresponding HAB/LAB mouse model and investigated c-Fos responses to elevated open arm exposure. Moreover, for the first time we included normal anxiety mice (NAB for comparison. The results confirm that HAB mice show hyperanxious behavior compared to their LAB counterparts, with NAB mice displaying an intermediate anxiety phenotype. Open arm challenge revealed altered c-Fos response in prefrontal-cortical, limbic and hypothalamic areas in HAB mice as compared to LAB mice, and this was similar to the differences observed previously in the HAB/LAB rat lines. In mice, however, additional differential c-Fos response was observed in subregions of the amygdala, hypothalamus, nucleus accumbens, midbrain and pons. Most of these differences were also seen between HAB and NAB mice, indicating that it is predominately the HAB line showing altered neuronal processing. Hypothalamic hypoactivation detected in LAB versus NAB mice may be associated with their low-anxiety/high-novelty-seeking phenotype. The detection of similarly disturbed activation patterns in a key set of anxiety-related brain areas in two independent models reflecting psychopathological states of trait anxiety confirms the notion that the altered brain activation in HAB animals is indeed characteristic of enhanced (pathological anxiety, providing information for potential targets of therapeutic intervention.

  10. Cardiopulmonary exercise testing and second-line pulmonary function tests to detect obstructive pattern in symptomatic smokers with borderline spirometry.

    Science.gov (United States)

    Di Marco, Fabiano; Terraneo, Silvia; Job, Sara; Rinaldo, Rocco Francesco; Sferrazza Papa, Giuseppe Francesco; Roggi, Maria Adelaide; Santus, Pierachille; Centanni, Stefano

    2017-06-01

    The need for additional research on symptomatic smokers with normal spirometry has been recently emphasized. Albeit not meeting criteria for Chronic obstructive pulmonary disease (COPD) diagnosis, symptomatic smokers may experience activity limitation, evidence of airway disease, and exacerbations. We, therefore, evaluated whether symptomatic smokers with borderline spirometry (post-bronchodilator FEV 1 /FVC ratio between 5th to 20th percentile of predicted values) have pulmonary function abnormalities at rest and ventilatory constraints during exercise. 48 subjects (aged 60 ± 8 years, mean ± SD, 73% males, 16 healthy, and 17 symptomatic smokers) underwent cardiopulmonary exercise testing (CPET), body plethysmography, nitrogen single-breath washout test (N 2 SBW), lung diffusion for carbon monoxide (DLCO), and forced oscillation technique (FOT). Compared to healthy subjects, symptomatic smokers showed: 1) reduced breathing reserve (36 ± 17 vs. 49 ± 12%, P = 0.050); 2) exercise induced dynamic hyperinflation (-0.20 ± 0.17 vs. -0.03 ± 0.21 L, P = 0.043); 3) higher residual volume (158 ± 22 vs. 112 ± 22%, P spirometry, CPET and second-line pulmonary function tests may detect obstructive pattern. These subjects should be referred for second line testing, to obtain a diagnosis, or at least to clarify the mechanisms underlying symptoms. Whether the natural history of these patients is similar to COPD, and they deserve a similar therapeutic approach is worth investigating. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Spatial patterns of distribution, abundance, and species diversity of small odontocetes estimated using density surface modeling with line transect sampling

    Science.gov (United States)

    Kanaji, Yu; Okazaki, Makoto; Miyashita, Tomio

    2017-06-01

    Spatial patterns of distribution, abundance, and species diversity of small odontocetes including species in the Delphinidae and Phocoenidae families were investigated using long-term dedicated sighting survey data collected between 1983 and 2006 in the North Pacific. Species diversity indices were calculated from abundance estimated using density surface modeling of line-transect data. The estimated abundance ranged from 19,521 individuals in killer whale to 1,886,022 in pantropical spotted dolphin. The predicted density maps showed that the habitats of small odontocetes corresponded well with distinct oceanic domains. Species richness was estimated to be highest between 30 and 40°N where warm- and cold-water currents converge. Simpson's Diversity Index showed latitudinal diversity gradients of decreasing species numbers toward the poles. Higher diversity was also estimated in the coastal areas and the zonal areas around 35-42°N. Coastal-offshore gradients and latitudinal gradients are known for many taxa. The zonal areas around 35°N and 40°N coincide with the Kuroshio Current and its extension and the subarctic boundary, respectively. These results suggest that the species diversity of small odontocetes primarily follows general patterns of latitudinal and longitudinal gradients, while the confluence of faunas originating in distinct water masses increases species diversify in frontal waters around 30-40°N. Population densities tended to be higher for the species inhabiting higher latitudes, but were highest for intermediate latitudes at approximately 35-40°N. According to latitudinal gradients in water temperature and biological productivity, the costs for thermoregulation will decrease in warmer low latitudes, while feeding efficiency will increase in colder high latitudes. These trade-offs could optimize population density in intermediate latitudes.

  12. Verification Image of The Veins on The Back Palm with Modified Local Line Binary Pattern (MLLBP) and Histogram

    Science.gov (United States)

    Prijono, Agus; Darmawan Hangkawidjaja, Aan; Ratnadewi; Saleh Ahmar, Ansari

    2018-01-01

    The verification to person who is used today as a fingerprint, signature, personal identification number (PIN) in the bank system, identity cards, attendance, easily copied and forged. This causes the system not secure and is vulnerable to unauthorized persons to access the system. In this research will be implemented verification system using the image of the blood vessels in the back of the palms as recognition more difficult to imitate because it is located inside the human body so it is safer to use. The blood vessels located at the back of the human hand is unique, even humans twins have a different image of the blood vessels. Besides the image of the blood vessels do not depend on a person’s age, so it can be used for long term, except in the case of an accident, or disease. Because of the unique vein pattern recognition can be used in a person. In this paper, we used a modification method to perform the introduction of a person based on the image of the blood vessel that is using Modified Local Line Binary Pattern (MLLBP). The process of matching blood vessel image feature extraction using Hamming Distance. Test case of verification is done by calculating the percentage of acceptance of the same person. Rejection error occurs if a person was not matched by the system with the data itself. The 10 person with 15 image compared to 5 image vein for each person is resulted 80,67% successful Another test case of the verification is done by verified two image from different person that is forgery, and the verification will be true if the system can rejection the image forgery. The ten different person is not verified and the result is obtained 94%.

  13. Laser induced Erasable Patterns in a N* Liquid Crystal on an Iron Doped Lithium Niobate (Postprint)

    Science.gov (United States)

    2017-10-12

    exposure experiments. For further investigations, samples were transferred to a conventional transmitted light polarized optical microscope , equipped...colored appearance of the image). The sample was then transferred to a conventional polarized optical microscope and investigated with transmitted light ...K. Kushnir, V. Reshetnyak, F. Ciciulla, A. Zaltron, C. Sada, and F. Simoni, “ Light -induced electric field generated by photovoltaic substrates

  14. Photochemical Reaction Patterns on Heterostructures of ZnO on Periodically Poled Lithium Niobate.

    Science.gov (United States)

    Kaur, Manpuneet; Liu, Qianlang; Crozier, Peter A; Nemanich, Robert J

    2016-10-05

    The internal electric field in LiNbO 3 provides a driving force for heterogeneous photocatalytic reactions, where photoexcited holes or electrons can participate in redox reactions on positive (+c) and negative (-c) domain surfaces and at the domain boundaries. One method to characterize the surface chemical reactivity is to measure photoinduced Ag deposition by immersing the LiNbO 3 in an aqueous AgNO 3 solution and illuminating with above bandgap light. Reduction of Ag + ions leads to the formation of Ag nanoparticles at the surface, and a high density of Ag nanoparticles indicates enhanced surface photochemical reactions. In this study, an n-type semiconducting ZnO layer is deposited on periodically poled LiNbO 3 (PPLN) to modulate the surface electronic properties and impact the surface redox reactions. After plasma enhanced atomic layer deposition (PEALD) of 1, 2, 4, and 10 nm ZnO thin films on PPLN substrates, the substrates were immersed in aqueous AgNO 3 and illuminated with above band gap UV light. The Ag nanoparticle density increased for 1 and 2 nm ZnO/PPLN heterostructures, indicating an enhanced electron density at the ZnO/PPLN surface. However, increasing the ZnO thickness beyond 2 nm resulted in a decrease in the Ag nanoparticle density. The increase in nanoparticle density is related to the photoexcited charge density at the ZnO/PPLN interface and the presence of a weakly adsorbed Stern layer at the ZnO surface. The decrease in the nanoparticle density for thicker ZnO is attributed to photoexcited electron screening in the ZnO layer that suppresses electron flow from the LiNbO 3 to ZnO surface.

  15. Mapping the Distribution Pattern of Gentrification near Urban Parks in the Case of Gyeongui Line Forest Park, Seoul, Korea

    Directory of Open Access Journals (Sweden)

    Yoonku Kwon

    2017-02-01

    Full Text Available The objective of this study was to map the distribution pattern of gentrification, showing the adverse effect of urban parks. The study adopted the perspective that urban parks, which have thus far been featured in urban planning without much criticism, may actually bring about unintended effects. This study employed a theory of gentrification that has received increasing interest in urban sociology to investigate the other side of the gentrification phenomenon. We identified urban parks as the cause of the gentrification from the start, and verified and visualised the phenomenon in the case of the Gyeongui Line Forest Park. We determined that the area with the higher possibility of gentrification was that within 600 m of the park. Big data accumulated over the past decade were used to prepare a proactive, systematic procedure to address gentrification, which is materialising in diverse forms. Through this study, we contribute to debates on the environmental justice of urban parks. Small changes in urban space can strongly affect our healthy lifestyles and urban sustainability. From this perspective, our study’s research process and its results could provide indications of how to structure and manage new urban planning projects in the future.

  16. X-ray diffraction patterns and diffracted intensity of Kα spectral lines of He-like ions

    Science.gov (United States)

    Goyal, Arun; Khatri, Indu; Singh, A. K.; Sharma, Rinku; Mohan, Man

    2017-09-01

    In the present paper, we have calculated fine-structure energy levels related to the configurations 1s2s, 1s2p, 1s3s and 1s3p by employing GRASP2K code. We have also computed radiative data for transitions from 1s2p 1 P1o, 1s2p 3 P2o, 1s2p 3 P1o and 1s2s 3S1 to the ground state 1s2. We have made comparisons of our presented energy levels and transition wavelengths with available results compiled by NIST and good agreement is achieved. We have also provided X-ray diffraction (XRD) patterns of Kα spectral lines, namely w, x, y and z of Cu XXVIII, Kr XXXV and Mo with diffraction angle and maximum diffracted intensity which is not published elsewhere in the literature. We believe that our presented results may be beneficial in determination of the order parameter, X-ray crystallography, solid-state drug analysis, forensic science, geological and medical applications.

  17. Laser patterning of nonlinear optical Bi2ZnB2O7 crystal lines in glass

    Directory of Open Access Journals (Sweden)

    Takayuki eKomatsu

    2015-05-01

    Full Text Available Bi2O3-based glasses are very attractive from the viewpoints of low-melting, high refractive index and crystallization, and the research on their glasses and glass-ceramics is at the frontiers of glass science and technology. Nonlinear optical Bi2ZnB2O7 crystal lines with a high orientation were patterned in 3Sm2O3-30.3Bi2O3-33.3ZnO-33.3B2O3 glass by using a laser-induced crystallization technique. It was confirmed from transmission electron microscope observations that crystals were formed in the inside of the glass, i.e., at the beneath of 4 micro-meter from the surface, although lasers (Yb:YVO4 laser with a wavelength of 1080 nm were focused at the glass surface. A new potential for optical device applications was added in Bi2O3-based glasses from the present study.

  18. First human hNT neurons patterned on parylene-C/silicon dioxide substrates: Combining an accessible cell line and robust patterning technology for the study of the pathological adult human brain.

    Science.gov (United States)

    Unsworth, C P; Graham, E S; Delivopoulos, E; Dragunow, M; Murray, A F

    2010-12-15

    In this communication, we describe a new method which has enabled the first patterning of human neurons (derived from the human teratocarcinoma cell line (hNT)) on parylene-C/silicon dioxide substrates. We reveal the details of the nanofabrication processes, cell differentiation and culturing protocols necessary to successfully pattern hNT neurons which are each key aspects of this new method. The benefits in patterning human neurons on silicon chip using an accessible cell line and robust patterning technology are of widespread value. Thus, using a combined technology such as this will facilitate the detailed study of the pathological human brain at both the single cell and network level. Copyright © 2010 Elsevier B.V. All rights reserved.

  19. Low-energy Self-defocusing Soliton Compression at Optical Communication Wavelengths in Unpoled Lithium Niobate Ridge Waveguide

    DEFF Research Database (Denmark)

    Guo, Hairun; Zeng, Xianglong; Zhou, Binbin

    2014-01-01

    Self-defocusing soliton compression supported by the cascaded phase-mismatched second-harmonic generation process is numerically demonstrated in unpoled lithium niobate ridge waveguides where nano-joule pulses are operated and quasi-phase-matching is unnecessary. The soliton range is 1100-1800 nm....

  20. Ion implantation and ion beam analysis of lithium niobate

    International Nuclear Information System (INIS)

    Arnold, G.W.

    1989-01-01

    This paper reports on implantations of He and Ti made into LiNbO 3 and the H and Li profiles determined by elastic recoil detection (ERD) techniques. The loss of Li and gain of H depends upon the supply of surface H (surface contaminants or ambient atmosphere). For 50 KeV He implants into LiNbO 3 through a 200 Angstrom Al film, the small Li loss is governed by the interface H. This is also the case for He implants into uncoated LiNbO 3 in a beam line with low hydrocarbon surface contamination; similar implants under conditions of greater hydrocarbon deposition result in proportionally larger Li loss and H gain in the implant damage region. The exchange is possible only for those He energies, i.e., 50 keV, where the damage profile intersects the surface. For Ti implants Li is lost with little H gain. For this case the Li loss is believed to result from radiation-enhanced diffusion. Where He implantation is used to establish waveguiding in LiNbO 3 , the presence or absence of H in the implanted region is crucial with regard to refractive index stability, due to the replacement of H by Li from the bulk

  1. Patterns of Limnohabitans microdiversity across a large set of freshwater habitats as revealed by Reverse Line Blot Hybridization.

    Directory of Open Access Journals (Sweden)

    Jan Jezbera

    Full Text Available Among abundant freshwater Betaproteobacteria, only few groups are considered to be of central ecological importance. One of them is the well-studied genus Limnohabitans and mainly its R-BT subcluster, investigated previously mainly by fluorescence in situ hybridization methods. We designed, based on sequences from a large Limnohabitans culture collection, 18 RLBH (Reverse Line Blot Hybridization probes specific for different groups within the genus Limnohabitans by targeting diagnostic sequences on their 16 S-23 S rRNA ITS regions. The developed probes covered in sum 92% of the available isolates. This set of probes was applied to environmental DNA originating from 161 different European standing freshwater habitats to reveal the microdiversity (intra-genus patterns of the Limnohabitans genus along a pH gradient. Investigated habitats differed in various physicochemical parameters, and represented a very broad range of standing freshwater habitats. The Limnohabitans microdiversity, assessed as number of RLBH-defined groups detected, increased significantly along the gradient of rising pH of habitats. 14 out of 18 probes returned detection signals that allowed predictions on the distribution of distinct Limnohabitans groups. Most probe-defined Limnohabitans groups showed preferences for alkaline habitats, one for acidic, and some seemed to lack preferences. Complete niche-separation was indicated for some of the probe-targeted groups. Moreover, bimodal distributions observed for some groups of Limnohabitans, suggested further niche separation between genotypes within the same probe-defined group. Statistical analyses suggested that different environmental parameters such as pH, conductivity, oxygen and altitude influenced the distribution of distinct groups. The results of our study do not support the hypothesis that the wide ecological distribution of Limnohabitans bacteria in standing freshwater habitats results from generalist adaptations of

  2. Formation of self-organized domain structures with charged domain walls in lithium niobate with surface layer modified by proton exchange

    Science.gov (United States)

    Shur, V. Ya.; Akhmatkhanov, A. R.; Chuvakova, M. A.; Dolbilov, M. A.; Zelenovskiy, P. S.; Lobov, A. I.

    2017-03-01

    We have studied the self-organized dendrite domain structures appeared as a result of polarization reversal in the uniform field in lithium niobate single crystals with the artificial surface layer created by proton exchange. We have revealed the self-organized sub-micron scale dendrite domain patterns consisting of domain stripes oriented along the X crystallographic directions separated by arrays of dashed residual domains at the surface by scanning probe microscopy. Raman confocal microscopy allowed visualizing the quasi-regular dendrite domain structures with similar geometry in the vicinity of both polar surfaces. The depth of the structure was about 20 μm for Z+ polar surface and 70 μm for Z- one. According to the proposed mechanism, the dendrite structure formation at the surface was related to the ineffective screening of the residual depolarization field. The computer simulation of the structure formation based on the cellular automata model with probabilistic switching rule proved the eligibility of the proposed scheme, the simulated dendrite domain patterns at various depths being similar to the experimental ones.

  3. Nanocrystals distribution inside the writing lines in a glass matrix using Argon laser irradiation.

    Science.gov (United States)

    Haro-González, P; Martín, I R; Creus, Alberto Hernández

    2010-01-18

    Localized modification in strontium barium niobate glass doped with Ho(3+) under laser irradiation has been carried out. The preliminary samples of this study have been fabricated by the melt quenching method and doped with 2.5% mol of Ho(3+). A 3.5W cw multiline Ar-laser has been focused and shifted in a line during laser irradiation. The formation of Strontium Barium Niobate nanocrystals has been confirmed by X-ray diffraction, atomic force microscope image and fluorescence. They have been localized in the irradiation line and change the optical properties of the sample. These nanocrystals have been obtained due to the excitation of the Ho(3+) ions which under nonradiative processes produced the heating of the sample. In this work, it has been demonstrated that the diffusion of the Nb(5+) ions to the border of the irradiated line controls the growth of the nanocrystals in the sample.

  4. The effect of surface modifications of carbon nanotubes on the electrical properties of inkjet-printed SWNT/PEDOT-PSS composite line patterns

    International Nuclear Information System (INIS)

    Najeeb, C K; Lee, Jae-Hyeok; Chang, Jingbo; Kim, Jae-Ho

    2010-01-01

    We prepared nanocomposite inks of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) filled with single-walled carbon nanotubes (SWNTs) purified by acidic treatment, carboxylated by chemical oxidation and carboxyl-functionalized nanotubes physically modified with a natural gum, gum arabic. Inkjet printing of line patterns with a feature size of 100 μm width and lengths ranging from 1 to 5 cm was performed on glass substrates with a piezoelectric inkjet printer. The carboxyl-functionalized SWNT-based composite demonstrated a significant decrease (fourfold) of electrical resistance for the line patterns compared to that with a purified CNT-based composite due to improved dispersability of nanotubes in the polymer matrix. The use of gum arabic for the dispersion of carboxyl-functionalized nanotubes demonstrated a further drastic decrease (18-fold) of the resistance compared with a purified CNT-based composite owing to the formation of an extended continuous network within the line pattern. The inkjet-printed conductive patterns can be applied in various fields, such as flexible high speed transistors, high efficiency solar cells and transparent electrodes.

  5. Single potassium niobate nano/microsized particles as local mechano-optical Brownian probes

    Science.gov (United States)

    Mor, Flavio M.; Sienkiewicz, Andrzej; Magrez, Arnaud; Forró, László; Jeney, Sylvia

    2016-03-01

    Perovskite alkaline niobates, due to their strong nonlinear optical properties, including birefringence and the capability to produce second-harmonic generation (SHG) signals, attract a lot of attention as potential candidates for applications as local nano/microsized mechano-optical probes. Here, we report on an implementation of photonic force microscopy (PFM) to explore the Brownian motion and optical trappability of monocrystalline potassium niobate (KNbO3) nano/microsized particles having sizes within the range of 50 to 750 nm. In particular, we exploit the anisotropic translational diffusive regime of the Brownian motion to quantify thermal fluctuations and optical forces of singly-trapped KNbO3 particles within the optical trapping volume of a PFM microscope. We also show that, under near-infrared (NIR) excitation of the highly focused laser beam of the PFM microscope, a single optically-trapped KNbO3 particle reveals a strong SHG signal manifested by a narrow peak (λem = 532 nm) at half the excitation wavelength (λex = 1064 nm). Moreover, we demonstrate that the thus induced SHG emission can be used as a local light source that is capable of optically exciting molecules of an organic dye, Rose Bengal (RB), which adhere to the particle surface, through the mechanism of luminescence energy transfer (LET).Perovskite alkaline niobates, due to their strong nonlinear optical properties, including birefringence and the capability to produce second-harmonic generation (SHG) signals, attract a lot of attention as potential candidates for applications as local nano/microsized mechano-optical probes. Here, we report on an implementation of photonic force microscopy (PFM) to explore the Brownian motion and optical trappability of monocrystalline potassium niobate (KNbO3) nano/microsized particles having sizes within the range of 50 to 750 nm. In particular, we exploit the anisotropic translational diffusive regime of the Brownian motion to quantify thermal

  6. Enhancement of Lithium Niobate nanophotonic structures via spin-coating technique for optical waveguides application

    Directory of Open Access Journals (Sweden)

    Fakhri Makram A.

    2017-01-01

    Full Text Available This work is dedicated to investigation of temperature effects in Lithium Niobate (LiNbO3 nanostructures. The LiNbO3 nanostructures were deposited on glass substrate by spin-coating technique. LiNbO3 was set down at 3000 rpm for 30 sec and annealed from 100 to 600 °C. The structures were characterized and analyzed by scanning electron microscopy (SEM and ultra-violet visible (UV-vis spectrophotometer. The measured results have showed that by increasing annealing temperatures, the structures start to be more crystallized and be more homogenized until the optimum arrangement was achieved. Once this was accomplished, it's applicable for optical waveguides development. Eventually, it starts to be less crystallization and non-homogeneous. Energy gap was recorded to be at average value of 3.9 eV.

  7. Synthesis and Structures of Reduced Niobates with Four Perovskite-like Layers and Their Semiconducting Properties

    Science.gov (United States)

    Sugimoto, W.; Ohkawa, H.; Naito, M.; Sugahara, Y.; Kuroda, K.

    1999-12-01

    Carriers were successfully doped into RbCa2NaNb4O13 by the substitution of Sr2+ for Na+, yielding electroconducting niobates with a layered structure consisting of four perovskite-like layers. Single-phase products of polycrystalline RbCa2Na1-xSrxNb4O13 (x=0.2 and 0.4) were synthesized by the solid-state reaction of RbCa2Nb3O10, Sr5Nb4O15, Nb2O5, and Nb metal. The solid solutions were indexed based on a tetragonal structure, corresponding to the end-member RbCa2NaNb4O13. With the increase in the amount of strontium substitution, an expansion of the c-axis was observed while the a-axis was essentially constant. The products showed semiconducting properties.

  8. Photorefractive lithium niobate crystals for applications in photonics; Photorefraktive Lithiumniobatkristalle fuer Anwendungen in der Photonik

    Energy Technology Data Exchange (ETDEWEB)

    Hartwig, U.

    2006-12-15

    Lithium niobate crystals (LiNbO{sub 3}) generally show a photorefractive response, i.e., light-induced refractive index changes. Crystals are investigated at room temperature and at elevated temperatures. As a result 'classical' photorefractive holographic volume-phase gratings, originating from space charge fields and the electro-optic effect, and 'non-classical' photorefractive volume-phase gratings, which can be traced back to strong absorption gratings, emerge. Single domain and periodically poled crystals (PPLN) are investigated. PPLN is typically used in non-linear optics for frequency conversion. The crystals also show non-linear photorefractive response during holographic recording with isotropically polarized light beams of equal intensity and, in the case of PPLN, by mixing of domain and holographic gratings. The results are important for applications combining the photorefractive and non-linear optical properties of LiNbO{sub 3}. (orig.)

  9. Optical properties of Er3+-doped strontium barium niobate nanocrystals obtained by thermal treatment in glass

    International Nuclear Information System (INIS)

    Haro-Gonzalez, P.; Lahoz, F.; Gonzalez-Platas, J.; Caceres, J.M.; Gonzalez-Perez, S.; Marrero-Lopez, D.; Capuj, N.; Martin, I.R.

    2008-01-01

    Measurements of the optical properties of Er 3+ ions in strontium barium niobate glass and glass ceramics have been carried out. The glasses have been fabricated using a melt-quenching method, and the glass ceramic samples have been obtained from the glass precursor by a thermal treatment. The ceramic samples formed by a glassy phase, and a crystalline phase contains nanocrystals of Sr 1-x Ba x Nb 2 O 6 (SBN) doped with Er 3+ ions with a mean size of ∼50 nm, as confirmed with XRD. Green up-conversion emission has been obtained under excitation at 800 nm, and the temporal evolution of this emission has been reported with the purpose of determining the involved up-conversion mechanism. These optical measures have confirmed that the Er 3+ ions have been incorporated into the SBN matrix, after a thermal treatment, which produced an increment of the up-conversion efficiency

  10. Electronic and Optical Properties of Sodium Niobate: A Density Functional Theory Study

    Directory of Open Access Journals (Sweden)

    Daniel Fritsch

    2018-01-01

    Full Text Available In recent years, much effort has been devoted to replace the most commonly used piezoelectric ceramic lead zirconate titanate Pb[ZrxTi1−x]O3 (PZT with a suitable lead-free alternative for memory or piezoelectric applications. One possible alternative to PZT is sodium niobate as it exhibits electrical and mechanical properties that make it an interesting material for technological applications. The high-temperature simple cubic perovskite structure undergoes a series of structural phase transitions with decreasing temperature. However, particularly the phases at room temperature and below are not yet fully characterised and understood. Here, we perform density functional theory calculations for the possible phases at room temperature and below and report on the structural, electronic, and optical properties of the different phases in comparison to experimental findings.

  11. Phase Regeneration of a BPSK Data Signal Using a Lithium Niobate Phase Modulator

    DEFF Research Database (Denmark)

    Mulvad, Hans Christian Hansen; Da Ros, Francesco; Galili, Michael

    2015-01-01

    We propose a scheme for phase regeneration of an optical binary phase shift keying (BPSK) data signal using a Lithium Niobate (LiNbO3) phase modulator. The scheme is based on heterodyne detection of the BPSK data signal with a continuous wave local oscillator (CW-LO). Carrier recovery...... in the optical domain, leading to a phase-regenerated BPSK data signal by the coherent superposition with a phase-inverted copy. The proposed scheme constitutes a compact and stable setup, where active phase-stabilization of the electrical data- and carrier-paths can potentially be avoided. An analytical...... is then achieved in the electrical domain using a ×2 frequency-multiplier and a narrow-band filtering scheme. Subsequently, a superposition of the recovered carrier and the heterodyne detected data signal is used to modulate the CW-LO in a LiNbO3 phase modulator. The result is a parametric mixing process...

  12. Numerical and Experimental Study of Optoelectronic Trapping on Iron-Doped Lithium Niobate Substrate

    Directory of Open Access Journals (Sweden)

    Michela Gazzetto

    2016-09-01

    Full Text Available Optoelectronic tweezers (OET are a promising technique for the realization of reconfigurable systems suitable to trap and manipulate microparticles. In particular, dielectrophoretic (DEP forces produced by OET represent a valid alternative to micro-fabricated metal electrodes, as strong and spatially reconfigurable electrical fields can be induced in a photoconductive layer by means of light-driven phenomena. In this paper we report, and compare with the experimental data, the results obtained by analyzing the spatial configurations of the DEP-forces produced by a 532 nm laser beam, with Gaussian intensity distribution, impinging on a Fe-doped Lithium Niobate substrate. Furthermore, we also present a promising preliminary result for water-droplets trapping, which could open the way to the application of this technique to biological samples manipulation.

  13. Pickering emulsions prepared by layered niobate K₄Nb₆O₁₇ intercalated with organic cations and photocatalytic dye decomposition in the emulsions.

    Science.gov (United States)

    Nakato, Teruyuki; Ueda, Hiroaki; Hashimoto, Sachika; Terao, Ryosuke; Kameyama, Miyuki; Mouri, Emiko

    2012-08-01

    We investigated emulsions stabilized with particles of layered hexaniobate, known as a semiconductor photocatalyst, and photocatalytic degradation of dyes in the emulsions. Hydrophobicity of the niobate particles was adjusted with the intercalation of alkylammonium ions into the interlayer spaces to enable emulsification in a toluene-water system. After the modification of interlayer space with hexylammonium ions, the niobate stabilized water-in-oil (w/o) emulsions in a broad composition range. Optical microscopy showed that the niobate particles covered the surfaces of emulsion droplets and played a role of emulsifying agents. The niobate particles also enabled the generation of oil-in-water (o/w) emulsions in a limited composition range. Modification with dodecylammonium ions, which turned the niobate particles more hydrophobic, only gave w/o emulsions, and the particles were located not only at the toluene-water interface but also inside the toluene continuous phase. On the other hand, interlayer modification with butylammonium ions led to the formation of o/w emulsions. When porphyrin dyes were added to the system, the cationic dye was adsorbed on niobate particles at the emulsion droplets whereas the lipophilic dye was dissolved in toluene. Upon UV irradiation, both of the dyes were degraded photocatalytically. When the cationic and lipophilic porphyrin molecules were simultaneously added to the emulsions, both of the dyes were photodecomposed nonselectively.

  14. Silver niobates

    International Nuclear Information System (INIS)

    Tanirbergenov, B.; Rozhenko, S.P.

    1979-01-01

    By means of determination of residual concentrations and pH measurements investigated are the AgNO 3 -KNbO 3 -H 2 O, AgNO 3 -K 3 NbO 4 -H 2 O, AgNO 3 -K 8 Nb 16 O 19 -H 2 O systems and established is formation of meta-, ortho-and hexaniobates of silver. AgNbO 3 x H 2 O, Ag 8 Nb 6 O 19 x 6H 2 O and Ag 3 NbO 3 x 2.5H 2 O are separated from aqueous solution. Using the methods of differential-thermal, thermogravimetric and X-ray-phase analyses it is shown that silver metaniobate transforms into the crystal state at 530 deg C. Ortho- and hexaniobate of silver decompose at 500 deg C with formation of silver metaniobate and metal silver

  15. Bliss and Loewe interaction analyses of clinically relevant drug combinations in human colon cancer cell lines reveal complex patterns of synergy and antagonism.

    Science.gov (United States)

    Kashif, Muhammad; Andersson, Claes; Mansoori, Sharmineh; Larsson, Rolf; Nygren, Peter; Gustafsson, Mats G

    2017-11-28

    We analyzed survival effects for 15 different pairs of clinically relevant anti-cancer drugs in three iso-genic pairs of human colorectal cancer carcinoma cell lines, by applying for the first time our novel software (R package) called COMBIA. In our experiments iso-genic pairs of cell lines were used, differing only with respect to a single clinically important KRAS or BRAF mutation. Frequently, concentration dependent but mutation independent joint Bliss and Loewe synergy/antagonism was found statistically significant. Four combinations were found synergistic/antagonistic specifically to the parental (harboring KRAS or BRAF mutation) cell line of the corresponding iso-genic cell lines pair. COMBIA offers considerable improvements over established software for synergy analysis such as MacSynergy™ II as it includes both Bliss (independence) and Loewe (additivity) analyses, together with a tailored non-parametric statistical analysis employing heteroscedasticity, controlled resampling, and global (omnibus) testing. In many cases Loewe analyses found significant synergistic as well as antagonistic effects in a cell line at different concentrations of a tested drug combination. By contrast, Bliss analysis found only one type of significant effect per cell line. In conclusion, the integrated Bliss and Loewe interaction analysis based on non-parametric statistics may provide more robust interaction analyses and reveal complex patterns of synergy and antagonism.

  16. Extended ABCD matrix formalism for the description of femtosecond diffraction patterns; application to femtosecond digital in-line holography with anamorphic optical systems.

    Science.gov (United States)

    Brunel, Marc; Shen, Huanhuan; Coetmellec, Sebastien; Lebrun, Denis

    2012-03-10

    We present a new model to predict diffraction patterns of femtosecond pulses through complex optical systems. The model is based on the extension of an ABCD matrix formalism combined with generalized Huygens-Fresnel transforms (already used in the CW regime) to the femtosecond regime. The model is tested to describe femtosecond digital in-line holography experiments realized in situ through a cylindrical Plexiglas pipe. The model allows us to establish analytical relations that link the holographic reconstruction process to the experimental parameters of the pipe and of the incident beam itself. Simulations and experimental results are in good concordance. Femtosecond digital in-line holography is shown to allow significant coherent noise reduction, and this model will be particularly efficient to describe a wide range of optical geometries. More generally, the model developed can be easily used in any experiment where the knowledge of the precise evolution of femtosecond transverse patterns is required.

  17. PHYSICAL AND ELECTRICAL PROPERTIES ENHANCEMENT OF RARE-EARTH DOPED-POTASSIUM SODIUM NIOBATE (KNN: A REVIEW

    Directory of Open Access Journals (Sweden)

    Akmal Mat Harttat Maziati

    2015-06-01

    Full Text Available Alkaline niobate mainly potassium sodium niobate, (KxNa1-x NbO3 (abreviated as KNN has long attracted attention as piezoelectric materials as its high Curie temperature (Tc and piezoelectric properties. The volatility of alkaline element (K, Na is, however detrimental to the stoichiometry of KNN, contributing to the failure to achieve high-density structure and lead to the formation of intrinsic defects. By partially doping of several rare-earth elements, the inherent defects could be improved significantly. Therefore, considerable attempts have been made to develop doped-KNN based ceramic materials with high electrical properties. In this paper, these research activities are reviewed, including dopants type and doping role in KNN perovskite structure.

  18. Photo-induced morphological winding and unwinding motion of nanoscrolls composed of niobate nanosheets with a polyfluoroalkyl azobenzene derivative

    Science.gov (United States)

    Nabetani, Yu; Takamura, Hazuki; Uchikoshi, Akino; Hassan, Syed Zahid; Shimada, Tetsuya; Takagi, Shinsuke; Tachibana, Hiroshi; Masui, Dai; Tong, Zhiwei; Inoue, Haruo

    2016-06-01

    Photo-responsive nanoscrolls can be successfully fabricated by mixing a polyfluoroalkyl azobenzene derivative and a niobate nanosheet, which is exfoliated from potassium hexaniobate. In this study, we have found that the photo-responsive nanoscroll shows a morphological motion of winding and unwinding, which is basically due to the nanosheet sliding within the nanoscroll, by efficient photo-isomerization reactions of the intercalated azobenzene in addition to the interlayer distance change of the nanoscrolls. The relative nanosheet sliding of the nanoscroll is estimated to be ca. 280 nm from the AFM morphology analysis. The distance of the sliding motion is over 20 times that of the averaged nanosheet sliding in the azobenzene/niobate hybrid film reported previously. Photo-responsive nanoscrolls can be expected to be novel photo-activated actuators and artificial muscle model materials.Photo-responsive nanoscrolls can be successfully fabricated by mixing a polyfluoroalkyl azobenzene derivative and a niobate nanosheet, which is exfoliated from potassium hexaniobate. In this study, we have found that the photo-responsive nanoscroll shows a morphological motion of winding and unwinding, which is basically due to the nanosheet sliding within the nanoscroll, by efficient photo-isomerization reactions of the intercalated azobenzene in addition to the interlayer distance change of the nanoscrolls. The relative nanosheet sliding of the nanoscroll is estimated to be ca. 280 nm from the AFM morphology analysis. The distance of the sliding motion is over 20 times that of the averaged nanosheet sliding in the azobenzene/niobate hybrid film reported previously. Photo-responsive nanoscrolls can be expected to be novel photo-activated actuators and artificial muscle model materials. Electronic supplementary information (ESI) available: Fig. S1. Photo-isomerization reaction of nanoscrolls. See DOI: 10.1039/c6nr02177h

  19. Analysis of the optical properties of Er{sup 3+}-doped strontium barium niobate nanocrystals using time-resolved laser spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kowalska, D.; Haro-Gonzalez, P. [Universidad de La Laguna, Departamento de Fisica Fundamental, Experimental, Electronica y Sistemas, La Laguna, Tenerife (Spain); Martin, I.R. [Universidad de La Laguna, Departamento de Fisica Fundamental, Experimental, Electronica y Sistemas, La Laguna, Tenerife (Spain); Malta Consolider Team, La Laguna, Tenerife (Spain); Caceres, J.M. [Universidad de La Laguna, Departamento de Edafologia y Geologia, La Laguna, Tenerife (Spain)

    2010-06-15

    This paper reports the results obtained in strontium barium niobate (SBN) nanocrystals in glasses doped with 1, 2.5 and 5 mol% of Er{sup 3+} ions. The melt-quenching method was applied to fabricate the glasses with composition SrO-BaO-Nb{sub 2}O{sub 5}-B{sub 2}O{sub 3} and further thermal treatment was used to obtain glass ceramic samples from the glass precursor. X-ray diffraction patterns confirmed the formation of SBN nanocrystals with an average size of about 50 nm in diameter. Time-resolved fluorescence spectra for the emission of Er{sup 3+} ions at 1550 nm have been analyzed in order to confirm the incorporation of the Er{sup 3+} ions into the nanocrystals. Green frequency upconversion emission under excitation at 975 nm coming from the ions in the nanocrystals has been obtained. This intense upconversion is about a factor of 500 higher than that obtained from the ions which reside in the glassy phase. Moreover, temporal evolution studies have been carried out with the purpose of determining the involved upconversion mechanism and the importance of these processes as a source of losses for the optical amplification at 1550 nm. (orig.)

  20. 3D-shape of objects with straight line-motion by simultaneous projection of color coded patterns

    Science.gov (United States)

    Flores, Jorge L.; Ayubi, Gaston A.; Di Martino, J. Matías; Castillo, Oscar E.; Ferrari, Jose A.

    2018-05-01

    In this work, we propose a novel technique to retrieve the 3D shape of dynamic objects by the simultaneous projection of a fringe pattern and a homogeneous light pattern which are both coded in two of the color channels of a RGB image. The fringe pattern, red channel, is used to retrieve the phase by phase-shift algorithms with arbitrary phase-step, while the homogeneous pattern, blue channel, is used to match pixels from the test object in consecutive images, which are acquired at different positions, and thus, to determine the speed of the object. The proposed method successfully overcomes the standard requirement of projecting fringes of two different frequencies; one frequency to extract object information and the other one to retrieve the phase. Validation experiments are presented.

  1. Flunitrazepam Excretion Patterns using the Abuscreen OnTrak and OnLine Immunoassays: Comparison with GC-MS

    OpenAIRE

    Salamone, S.J.; Honasoge, S.; Brenner, C.; McNally, A.J.; Passarelli, J.; Goc-Szkutnicka, K.; Brenneisen, R.; ElSohly, M.A.; Feng, S.; Brenneisen, R.

    2017-01-01

    A study was conducted to compare the performance of the OnLine and OnTrak immunoassays for benzodiazepines with gas chromatographic-mass spectrometric (GC-MS) analysis in detecting flunitrazepam (FNP) and its metabolites in human urine. Urine was collected over a 72-h period from six individuals (four male and two female) who had taken a single oral dose of either 1 or 4 mg of FNP. The OnTrak assay was run at a 100-ng/mL cutoff of nordiazepam (NDP), and the OnLine assay was run with a standar...

  2. Leaf growth rate per unit thermal time follows QTL-dependent daily patterns in hundreds of maize lines under naturally fluctuating conditions.

    Science.gov (United States)

    Sadok, Walid; Naudin, Philippe; Boussuge, Benoit; Muller, Bertrand; Welcker, Claude; Tardieu, Francois

    2007-02-01

    We have analysed daily patterns of leaf elongation rate (LER) in large data sets with 318 genotypes placed in naturally fluctuating temperature and evaporative demand, and examined the effect of targeted alleles on these patterns. The method consisted, firstly, in expressing elongation rate per unit thermal time, so it became temperature independent; secondly, in a joint analysis of diurnal fluctuations of elongation rate and of micrometeorological conditions in several experiments, and finally, in a comparison of daily patterns between groups of genotypes possessing targeted alleles. (1) Conditions for using thermal time at a time step of 15 min were first tested successfully in 318 recombinant inbred lines (RILs) of three mapping populations. (2) An analysis of 1989 time courses revealed a robust daily pattern of LER per unit thermal time (LERth) over several experiments. LERth was constant during the night and was reproducible (for a given RIL) over up to 10 consecutive nights in different experiments. It declined rapidly during the early morning, closely following the daily pattern of transpiration rate. (3) Groups of RILs carrying alleles conferring a high response to temperature had markedly higher night-time plateau of LER than those with low responses. Groups of RILs with high response to evaporative demand had rapid decreases in elongation rate at the transition between night and day, while this decrease was slower in groups of RILs with low response. These results open the way for using kinetics of responses to environmental stimuli as a phenotyping tool in genetic analyses.

  3. Reactive ion etching challenges for half-pitch sub-10-nm line-and-space pattern fabrication using directed self-assembly lithography

    Science.gov (United States)

    Kasahara, Yusuke; Seino, Yuriko; Sato, Hironobu; Kubota, Hitoshi; Kanai, Hideki; Kihara, Naoko; Minegishi, Shinya; Miyagi, Ken; Tobana, Toshikatsu; Shiraishi, Masayuki; Kobayashi, Katsutoshi; Kodera, Katsuyoshi; Yamano, Hitoshi; Kawamonzen, Yoshiaki; Azuma, Tsukasa

    2016-03-01

    Directed self-assembly is a candidate process for sub-15-nm patterning applications. It will be necessary to develop the DSA process fully and consider process integration to adapt the DSA process for use in semiconductor manufacturing. We investigated the reactive ion etching (RIE) process for the fabrication of sub-10-nm metal wires using the DSA process and the process integration requirements for electrical yield verification. We evaluated the process using an organic high-chi block copolymer (BCP) with a lamellar structure. One critical issue during DSA pattern transfer involves the BCP bottom connection. The BCP bottom connections could be removed without BCP mask loss by using the optimum bias power and the optimum BCP film thickness. The sub-10-nm DSA line-and-space (L/S) patterns were successfully transferred to a SiO2 layer with sufficient film thickness for the fabrication of the metal wire. We also evaluated the overlay technique used in the process. The connect patterns and cut patterns were overlaid on 10-nm trenches fabricated by the DSA process.

  4. Digital image processing for the acquisition of graphic similarity of the distributional patterns between cutaneous lesions of linear scleroderma and Blaschko's lines.

    Science.gov (United States)

    Jue, Mihn Sook; Kim, Moon Hwan; Ko, Joo Yeon; Lee, Chang Woo

    2011-08-01

    The aim of this study is to objectively evaluate whether linear scleroderma (LS) follows Blaschko's lines (BL) in Korean patients using digital image processing. Thirty-two patients with LS were examined. According to the patients' clinical photographs, their skin lesions were plotted on the head and body charts. With the aid of graphics software, a digital image was produced that included an overlay of all the individual lesions and was used to compare the graphics with the published BL. To investigate the image similarity between the graphic patterns of the LS and BL, each case was analyzed by means of Hough transformations and Czekanowski's methods. The comparative investigation of the graphic similarity of distributional patterns between the LS and BL showed that Czekanowski's similarity index was 0.947 on average. In conclusion, our objective results suggest that the graphic patterns of the distribution of the LS skin lesions showed a high degree of similarity and in fact were almost identical to that of BL which may be the lines of embryonic development of the skin. This finding may suggest that some developmental factors during the embryological age could constitute the cause of LS. © 2011 Japanese Dermatological Association.

  5. HIV type 1 drug resistance patterns among patients failing first and second line antiretroviral therapy in Nairobi, Kenya.

    Science.gov (United States)

    Koigi, Peter; Ngayo, Musa Otieno; Khamadi, Samoel; Ngugi, Caroline; Nyamache, Anthony Kebira

    2014-12-09

    The ever-expanding rollout of antiretroviral therapy in poor resource settings without routine virological monitoring has been accompanied with development of drug resistance that has resulted in limited treatment success. A cross-sectional study with one time viral load was conducted during the period between 2012 and 2013 to determine treatment failure and drug resistance mutations among adults receiving first-line (44) (3TC_d4T/AZT_NVP/EFV) and second-line (20) (3TC/AZT/LPV/r) in Nairobi, Kenya. HIV-1 pol-RT genotyping for drug resistance was performed using an in-house protocol. A total of 64 patients were recruited (mean age 36.9 yrs.) during the period between 2012 and 2013 of the 44 adult patients failing first-line 24 (40.9%) had drug resistance mutations. Eight (8) patients had NRTI resistance mutations with NAMS M184V (54.2%) and K65R (8.4%) mutations being the highest followed by TAMs T215Y and K70R (12.5%). In addition, among patients failing second-line (20), six patients (30%) had NNRTI resistance; two patients on K103N and G190A mutations while V106A, Y184V, A98G, Y181C mutations per patient were also detected. However, for NRTI two patients had TAM T215Y. M184V mutation occurred in one patient. The study findings showed that HIV-1 drug resistance was significantly high in the study population. The detected accumulated resistance strains show that emergence of HIV drug resistance will continue to be a big challenge and should be given more attention as the scale up of treatment in the country continues.

  6. Establishment and cell cycle distribution pattern of a radioresistant subline from human lung cancer D6 cell line

    International Nuclear Information System (INIS)

    Wei Qichun; Zheng Shu

    2003-01-01

    Objective: To establish a radioresistant cell subline from a human D6 lung cancer cell line and investigate the mechanism of radioresistance. Methods: D6 human NSCLC cells were exposed to X-rays generated by a linear accelerator(650 cGy per fraction). After a total exposure dose of 5200 cGy, a monoclone was obtained. The radiosensitivity and cell cycle distribution of this clone, together with its parent D6 cells, were measured by clonogenic assay and flow cytometry. Results: The new clone, namely D 6 -R subline, had a higher D 0 (D 0 =2.08 Gy) and a broader initial shoulder(Dq=1.64 Gy, N=2.20) than those of the parent D6 cell line (D 0 =1.84 Gy, Dq=0.34 Gy, N=1.20), being 1.65-fold increase in radioresistance as regards to the SF 2 . The D6-R subline also showed higher percentage of cells in S phase(53.4% vs 37.8%), but lower percentages in G 1 (44.1% vs 57.2%) and G 2 /M(2.5% vs 5%) phases. Conclusion: The new subline D6-R is more radioresistant as compare to its parent D6 cell line, and has a different cell cycle distribution

  7. Studies of AuNi alloys by electron spectroscopies with the aid of the line shape analysis by the pattern recognition method

    Czech Academy of Sciences Publication Activity Database

    Lesiak, B.; Zemek, Josef; Jiříček, Petr; Jozwik, A.

    2006-01-01

    Roč. 38, - (2006), s. 1204-1210 ISSN 0142-2421 R&D Projects: GA ČR(CZ) GA202/06/0459 Institutional research plan: CEZ:AV0Z10100521 Keywords : elastic peak electron spectroscopy * EPES * x-ray photoelectron spectroscopy * XPS * line shape analysis * pattern recognition method * fuzzy k-nearest neighbour rule * fkNN rule * AuNi alloys * Au surface segregation Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.427, year: 2006

  8. Generation and tunable enhancement of a sum-frequency signal in lithium niobate nanowires

    Science.gov (United States)

    Sergeyev, Anton; Reig Escalé, Marc; Grange, Rachel

    2017-02-01

    Recent developments in the fabrication of lithium niobate (LiNbO3) structures down to the nanoscale opens up novel applications of this versatile material in nonlinear optics. Current nonlinear optical studies in sub-micron waveguides are mainly restricted to the generation of second and third harmonics. In this work, we demonstrate the generation and waveguiding of the sum-frequency generation (SFG) signal in a single LiNbO3 nanowire with a cross-section of 517 nm  ×  654 nm. Furthermore, we enhance the guided SFG signal 17.9 times by means of modal phase matching. We also display tuning of the phase-matched wavelength by varying the nanowire cross-section and changing the polarization of the incident laser. The results prove that LiNbO3 nanowires can be successfully used for nonlinear wave-mixing applications and assisting the miniaturization of optical devices. , which features invited work from the best early-career researchers working within the scope of J Phys D. This project is part of the Journal of Physics series’ 50th anniversary celebrations in 2017. Rachel Grange was selected by the Editorial Board of J Phys D as an Emerging Leader.

  9. Label-free investigation of the effects of lithium niobate polarization on cell adhesion

    Science.gov (United States)

    Mandracchia, B.; Gennari, O.; Paturzo, M.; Grilli, S.; Ferraro, P.

    2017-06-01

    The determination of contact area is pivotal to understand how biomaterials properties influence cell adhesion. In particular, the influence of surface charges is well-known but still controversial, especially when new functional materials and methods are introduced. Here, we use for the first time Holographic Total Internal Reflection Microscopy (HoloTIRM) to study the influence of the spontaneous polarization of ferroelectric lithium niobate (LN) on the adhesion properties of fibroblast cells. The selective illumination of a very thin region directly above the substrate, achieved by Total Internal Reflection, provides high-contrast images of the contact regions. Holographic recording, on the other hand, allows for label-free quantitative phase imaging of the contact areas between cells and LN. Phase signal is more sensitive in the first 100nm and, thus more reliable in order to locate focal contacts. This work shows that cells adhering on negatively polarized LN present a significant increase of the contact area in comparison with cells adhering on the positively polarized LN substrate, as well as an intensification of contact vicinity. This confirms the potential of LN as a platform for investigating the role of charges on cellular processes. The similarity of cell adhesion behavior on negatively polarized LN and glass control also confirms the possibility to use LN as an active substrate without impairing cell behavior.

  10. High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate

    Science.gov (United States)

    Witmer, Jeremy D.; Valery, Joseph A.; Arrangoiz-Arriola, Patricio; Sarabalis, Christopher J.; Hill, Jeff T.; Safavi-Naeini, Amir H.

    2017-04-01

    Future quantum networks, in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the device. We demonstrate high quality (Q) factor ring, disk and photonic crystal resonators using a hybrid silicon-on-lithium-niobate material system. Optical Q factors up to 730,000 are achieved, corresponding to propagation loss of 0.8 dB/cm. We also use the electro-optic effect to modulate the resonance frequency of a photonic crystal cavity, achieving a electro-optic modulation coefficient between 1 and 2 pm/V. In addition to quantum technology, we expect that our results will be useful both in traditional silicon photonics applications and in high-sensitivity acousto-optic devices.

  11. Complex extraordinary dielectric function of Mg-doped lithium niobate crystals at terahertz frequencies

    Science.gov (United States)

    Kuznetsov, K. A.; Kitaeva, G. Kh.; Kovalev, S. P.; Germansky, S. A.; Buryakov, A. M.; Tuchak, A. N.; Penin, A. N.

    2016-08-01

    We study the dispersion of the extraordinary dielectric function real and imaginary parts in the wide terahertz-frequency range of the lowest polariton branch for bulk LiNbO3 and Mg:LiNbO3 crystals. At frequencies 0.1-2.5 THz, both dispersion parts are measured by means of standard time-domain terahertz spectroscopy, and at higher frequencies up to 5.5 THz, the dielectric function real part is determined using a common scheme of spontaneous parametric down-conversion under near-forward Raman scattering by phonon polaritons. A special approach is applied for measuring of the dielectric function imaginary part at frequencies 1-3 THz, based on the analysis of visibility of three-wave second-order interference under spontaneous parametric down-conversion. The generalized approximate expressions are obtained for complex dielectric function dispersion within the lower polariton branches of LiNbO3 and Mg:LiNbO3. It is shown that the well-known decrease in terahertz-wave absorption of lithium niobate crystals under Mg-doping is caused by changes in the defect structure and reduction of coupling of the terahertz-frequency polaritons with Debye relaxational mode.

  12. Nanotechnology in lithium niobate for integrated optic frequency conversion in the UV

    Science.gov (United States)

    Busacca, Alessandro C.; Santini, Claudia; Oliveri, Luigi; Riva-Sanseverino, Stefano; Parisi, Antonino; Cino, Alfonso C.; Assanto, Gaetano

    2017-11-01

    In the domain of Earth Explorer satellites nanoengineered nonlinear crystals can optimize UV tunable solid-state laser converters. Lightweight sources can be based on Lithium Niobate (LN) domain engineering by electric field poling and guided wave interactions. In this Communication we report the preliminary experimental results and the very first demonstration of UltraViolet second-harmonic generation by first-order quasi-phase-matching in a surface-periodically-poled proton-exchanged LN waveguide. The pump source was a Ti-Sapphire laser with a tunability range of 700- 980 nm and a 40 GHz linewidth. We have measured UV continuous-wave light at 390 nm by means of a lock-in amplifier and of a photodiode with enhanced response in the UV. Measured conversion efficiency was about 1%W-1cm-2. QPM experiments show good agreement with theory and pave the way for a future implementation of the technique in materials less prone to photorefractive damage and wider transparency in the UV, such as Lithium Tantalate.

  13. Effect of powder processing conditions on the electromechanical properties of lithium doped potassium sodium niobate

    Directory of Open Access Journals (Sweden)

    Ebru Mensur-Alkoy

    2016-11-01

    Full Text Available Lithium doped potassium sodium niobate ceramics with (K0.50−x/2Na0.50−x/2LixNbO3 composition where x = 0.04 and 0.07 were fabricated by solid state calcination and pressureless sintering methods. However, two different powder processing and calcination routes were used in this study and their effect on the structural and electrical properties were investigated and discussed. The routes were namely loose calcination and compact calcination. A general trend of decreasing grain size was observed in the sintered ceramics prepared from these powders. The most drastic effect was observed on the electromechanical properties of the samples, where the maximum strain of 7% lithium modified sample under an E-field of 50 kV/cm was increased from 0.09% to 0.12% by changing processing route. Furthermore, hysteretic behavior of the strain was found to decrease. This tendency was also valid for ferroelectric hysteresis property, with remnant polarization (2Pr increasing from 23 μC/cm2 to 46 μC/cm2. The improvements observed in the electrical properties were discussed on the basis of chemical homogeneity and uniform ionic distribution.

  14. Influence of heat treatment on structure and some physical properties of lithium boro-niobate glass

    Science.gov (United States)

    Kashif, I.; Sakr, E. M.; Soliman, A. A.; Ratep, A.

    2012-08-01

    The glass composition (90 mol% Li2B4O7-10 mol% Nb2O5) was prepared by the melt quenching technique. The quenched sample was heat treated at 480°C, 545°C and 630°C for 5 h and heat treated at 780°C with different time. The times were 5, 10, 15, 20, 28, and 36 h. The glass and glass ceramics were studied by differential thermal analysis (DTA), X-ray diffraction (XRD), and dc conductivity as a function of temperature. Lithium niobate (LiNbO3) and lithium diborate (Li2B4O7) were the main phases in glass ceramic addition to traces from LiNb3O8. Crystallite size of the main phases determined from the X-ray diffraction peaks are in the range <100 nm. The fraction of crystalline (LiNbO3) phase increases with increase the heat treatment temperature and time. The relation between physical properties and structure were studied.

  15. Anisotropic surface acoustic waves in tungsten/lithium niobate phononic crystals

    Science.gov (United States)

    Sun, Jia-Hong; Yu, Yuan-Hai

    2018-02-01

    Phononic crystals (PnC) were known for acoustic band gaps for different acoustic waves. PnCs were already applied in surface acoustic wave (SAW) devices as reflective gratings based on the band gaps. In this paper, another important property of PnCs, the anisotropic propagation, was studied. PnCs made of circular tungsten films on a lithium niobate substrate were analyzed by finite element method. Dispersion curves and equal frequency contours of surface acoustic waves in PnCs of various dimensions were calculated to study the anisotropy. The non-circular equal frequency contours and negative refraction of group velocity were observed. Then PnC was applied as an acoustic lens based on the anisotropic propagation. Trajectory of SAW passing PnC lens was calculated and transmission of SAW was optimized by selecting proper layers of lens and applying tapered PnC. The result showed that PnC lens can suppress diffraction of surface waves effectively and improve the performance of SAW devices.

  16. Modification of both d33 and TC in a potassium-sodium niobate ternary system.

    Science.gov (United States)

    Wu, Bo; Wu, Jiagang; Xiao, Dingquan; Zhu, Jianguo

    2015-12-28

    In this work, we simultaneously achieved a giant d33 and a high TC in a lead-free piezoelectric ternary system of (1-x-y)K0.48Na0.52NbO3-xBiFeO3-yBi0.5Na0.5ZrO3 {(1-x-y)KNN-xBF-yBNZ}. Owing to the rhombohedral-orthorhombic-tetragonal (R-O-T) phase coexistence and the enhanced dielectric and ferroelectric properties, the ceramics with a composition of (x = 0.006, y = 0.04) show a giant d33 of ∼428 pC N(-1) together with a TC of ∼318 °C, thereby proving that the design of ternary systems is an effective way to achieve both high d33 and high TC in KNN-based materials. In addition, a good thermal stability for piezoelectricity was also observed in these ceramics (e.g., d33 > 390 pC N(-1), T ≤ 300 °C). This is the first time such a good comprehensive performance in potassium-sodium niobate materials has been obtained. As a result, we believe that this type of material system with both giant d33 and high TC is a promising candidate for high-temperature piezoelectric devices.

  17. Effect of powder processing conditions on the electromechanical properties of lithium doped potassium sodium niobate

    Energy Technology Data Exchange (ETDEWEB)

    Mensur-Alkoy, E.; Berksoy-Yavuz, A.

    2016-07-01

    Lithium doped potassium sodium niobate ceramics with (K0.50−x/2Na0.50−x/2Lix)NbO3 composition where x=0.04 and 0.07 were fabricated by solid state calcination and pressureless sintering methods. However, two different powder processing and calcination routes were used in this study and their effect on the structural and electrical properties were investigated and discussed. The routes were namely loose calcination and compact calcination. A general trend of decreasing grain size was observed in the sintered ceramics prepared from these powders. The most drastic effect was observed on the electromechanical properties of the samples, where the maximum strain of 7% lithium modified sample under an E-field of 50kV/cm was increased from 0.09% to 0.12% by changing processing route. Furthermore, hysteretic behavior of the strain was found to decrease. This tendency was also valid for ferroelectric hysteresis property, with remnant polarization (2Pr) increasing from 23μC/cm2 to 46μC/cm2. The improvements observed in the electrical properties were discussed on the basis of chemical homogeneity and uniform ionic distribution. (Author)

  18. Phase transition characteristics and associated piezoelectricity of potassium-sodium niobate lead-free ceramics.

    Science.gov (United States)

    Wang, Yuanyu; Hu, Liang; Zhang, Qilong; Yang, Hui

    2015-08-14

    To achieve high piezoelectric activity and a wide sintering temperature range, the ceramic system concerning (1 - x)(K(0.48)Na(0.52))(Nb(0.96)Sb(0.04))O(3)-x[Bi(0.5)(Na(0.7)Ag(0.3))(0.5)](0.90) Zn(0.10)ZrO(3) was designed, and the rhombohedral-tetragonal (R-T) phase boundary can drive a high d(33). Phase transition characteristics as well as their effects on the electrical properties were investigated systematically. The R-T coexistence phase boundary (0.04 ≤ x ≤ 0.05) can be driven via modification with BNAZZ, and has been confirmed by XRD and temperature-dependent dielectric constants as well as Raman analysis, and the ceramics possess enhanced piezoelectric properties (d(33) ∼ 425 pC N(-1) and k(p) ∼ 0.43) and a high unipolar strain (∼0.3%). In addition, a wide sintering temperature range of 1050-1080 °C can warrant a large d(33) of 400-430 pC N(-1), which can benefit practical applications. As a result, the addition of BNAZZ is an effective method to improve the electrical properties (piezoelectricity and strain) and sintering behavior of potassium-sodium niobate ceramics.

  19. Microwave-assisted sintering of non-stoichiometric strontium bismuth niobate ceramic: Structural and dielectric properties

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Rajveer [Department of Physics and Astrophysics, University of Delhi, New Delhi 110007 (India); Department of Physics, Atmaram Sanatan Dharma College, University of Delhi, Dhaula Kuan, New Delhi 110021 (India); Luthra, Vandna [Department of Physics, Gargi College, University of Delhi, Siri Fort Road, New Delhi 110049 (India); Tandon, R.P., E-mail: ram_tandon@hotmail.com [Department of Physics and Astrophysics, University of Delhi, New Delhi 110007 (India)

    2016-11-01

    In recent years the microwave sintering has been utilized for the synthesis of materials in enhancement of the properties. In this paper strontium bismuth niobate (Sr{sub 0.8}Bi{sub 2.2}Nb{sub 2}O{sub 9}:SBN) bulk ceramic has been synthesized by microwave reactive sintering and conventional heating techniques. A relative density of 99.6% has been achieved for microwave sintered SBN, which is higher than that of (98.81%) conventionally sintered SBN. The phase formation of SBN synthesized by both processes has been confirmed by X-ray diffraction (XRD). The surface morphology of SBN was observed by scanning electron microscopy (SEM). The microstructure was found to be more uniform in case of SBN sintered by microwave sintering. The dielectric properties of SBN were studied as a function of frequency in the temperature range of 30–500 °C. Both the samples synthesized by two different processes were found to follow Curie–Weiss law above the transition temperature. The Curie temperature was found to be higher for microwave sintered SBN. The dielectric constant and the transition temperature were observed to be higher for SBN ceramic synthesized by microwave sintering technique. The ac and dc activation energy values were also found to be higher for microwave sintered SBN as compared to conventional sintering technique.

  20. Temperature dependent dielectric relaxation and ac-conductivity of alkali niobate ceramics studied by impedance spectroscopy

    Science.gov (United States)

    Yadav, Abhinav; Mantry, Snigdha Paramita; Fahad, Mohd.; Sarun, P. M.

    2018-05-01

    Sodium niobate (NaNbO3) ceramics is prepared by conventional solid state reaction method at sintering temperature 1150 °C for 4 h. The structural information of the material has been investigated by X-ray diffraction (XRD) and Field emission scanning electron microscopy (FE-SEM). The XRD analysis of NaNbO3 ceramics shows an orthorhombic structure. The FE-SEM micrograph of NaNbO3 ceramics exhibit grains with grain sizes ranging between 1 μm to 5 μm. The surface coverage and average grain size of NaNbO3 ceramics are found to be 97.6 % and 2.5 μm, respectively. Frequency dependent electrical properties of NaNbO3 is investigated from room temperature to 500 °C in wide frequency range (100 Hz-5 MHz). Dielectric constant, ac-conductivity, impedance, modulus and Nyquist analysis are performed. The observed dielectric constant (1 kHz) at transition temperature (400 °C) are 975. From conductivity analysis, the estimated activation energy of NaNbO3 ceramics is 0.58 eV at 10 kHz. The result of Nyquist plot shows that the electrical behavior of NaNbO3 ceramics is contributed by grain and grain boundary responses. The impedance and modulus spectrum asserts that the negative temperature coefficient of resistance (NTCR) behavior and non-Debye type relaxation in NaNbO3.

  1. Dielectric constant enhancement in a silicone elastomer filled with lead magnesium niobate-lead titanate

    International Nuclear Information System (INIS)

    Gallone, Giuseppe; Carpi, Federico; De Rossi, Danilo; Levita, Giovanni; Marchetti, Augusto

    2007-01-01

    Lead magnesium niobate-lead titanate (PMN-PT) ferroelectric powder was used to develop a particulated composite based on a silicone elastomer matrix, with improved dielectric permittivity. The filler was characterised by X-ray diffraction and scanning electron microscopy. Complex dielectric permittivity (10-10 8 Hz) and tensile mechanical properties (elastic modulus and ultimate stress) of composites at various filler contents (up to 30% by vol.) were compared with those of the neat silicone elastomer. Both the dielectric constant and loss factor regularly increased with the filler content. The elastic modulus increased with a lower rate than that of the dielectric constant. Even though the addition of filler resulted in a detriment of both toughness, ultimate stress and elongation at break, a good stretchability was still retained, as elongation ratios greater than 3 were possible at the highest filler content. Several dielectric models were compared to the experimental data and the best match was achieved by the Bruggeman model, which can be used as a predictive rule for different volume contents of filler

  2. Dielectric constant enhancement in a silicone elastomer filled with lead magnesium niobate-lead titanate

    Energy Technology Data Exchange (ETDEWEB)

    Gallone, Giuseppe [Department of Chemical Engineering, Industrial Chemistry and Material Science, University of Pisa, via Diotisalvi 2, I-56126 Pisa (Italy)]. E-mail: gallone@ing.unipi.it; Carpi, Federico [Interdepartmental Research Centre ' E. Piaggio' , University of Pisa, via Diotisalvi 2, I-56126 Pisa (Italy)]. E-mail: f.carpi@ing.unipi.it; De Rossi, Danilo [Interdepartmental Research Centre ' E. Piaggio' , University of Pisa, via Diotisalvi 2, I-56126 Pisa (Italy)]. E-mail: d.derossi@ing.unipi.it; Levita, Giovanni [Department of Chemical Engineering, Industrial Chemistry and Material Science, University of Pisa, via Diotisalvi 2, I-56126 Pisa (Italy)]. E-mail: levita@ing.unipi.it; Marchetti, Augusto [Department of Chemical Engineering, Industrial Chemistry and Material Science, University of Pisa, via Diotisalvi 2, I-56126 Pisa (Italy)]. E-mail: marchetti@ing.unipi.it

    2007-01-15

    Lead magnesium niobate-lead titanate (PMN-PT) ferroelectric powder was used to develop a particulated composite based on a silicone elastomer matrix, with improved dielectric permittivity. The filler was characterised by X-ray diffraction and scanning electron microscopy. Complex dielectric permittivity (10-10{sup 8} Hz) and tensile mechanical properties (elastic modulus and ultimate stress) of composites at various filler contents (up to 30% by vol.) were compared with those of the neat silicone elastomer. Both the dielectric constant and loss factor regularly increased with the filler content. The elastic modulus increased with a lower rate than that of the dielectric constant. Even though the addition of filler resulted in a detriment of both toughness, ultimate stress and elongation at break, a good stretchability was still retained, as elongation ratios greater than 3 were possible at the highest filler content. Several dielectric models were compared to the experimental data and the best match was achieved by the Bruggeman model, which can be used as a predictive rule for different volume contents of filler.

  3. X-ray absorption spectroscopy investigation of structurally modified lithium niobate crystals

    Energy Technology Data Exchange (ETDEWEB)

    Vitova, Tonya

    2008-02-15

    The type and concentration of impurity centers in different valence states are crucial for tuning the photorefractive properties of doped Lithium Niobate (LN) crystals. X-ray Absorption Spectroscopy (XAS) is an appropriate tool for studying the local structure of impurity centers. XAS combined with absorption in UV/VIS/IR and High Resolution X-ray Emission Spectroscopy (HRXES) provide information about the valence state of the dopant ions in as-grown, reduced or oxidized doped LN crystals. Cu (Cu{sup 1+} and Cu{sup 2+}) and Fe (Fe{sup 2+} and Fe{sup 3+}) atoms are found in two different valence states, whereas there are indications for a third Mn valency, in addition to Mn{sup 2+} and Mn{sup 3+} in manganese-doped LN crystals. One of the charge compensation mechanisms during reduction of copper- doped LN crystals is outgassing of oxygen atoms. Cu ions in the reduced crystals have at least two different site symmetries: twofold (Cu{sup 1+}) and sixfold (Cu{sup 2+}) coordinated by O atoms. Fe and Mn atoms are coordinated by six O atoms. Cu and Fe ions are found to occupy only Li sites, whereas Mn ions are also incorporated into Li and Nb sites. The refractive index change in LN crystals irradiated with {sup 3}He{sup 2+} ions is caused by structurally disordered centers, where Nb atoms are displaced from normal crystallographic sites and Li or/and O vacancies are present. (orig.)

  4. Synthesis, structure and electrical properties of Mg-, Ni-codoped bismuth niobates

    Directory of Open Access Journals (Sweden)

    M. S. Koroleva

    2017-12-01

    Full Text Available Mg-, Ni-codoped bismuth niobates Bi1.6Mg0.8-xNixNb1.6O7-δ (x = 0; 0.2; 0.4; 0.6; 0.8 were obtained by conventional solid-state reaction method. It was shown that the Mg atoms are distributed at the Nb sites while the Ni atoms are distributed over the Bi- and the Nb-sites, according to the results of comparison of pycnometric and X-ray density of the Bi1.6Mg0.4Ni0.4Nb1.6O7-δ pyrochlore. In this case, about 15–20% of the vacancies are formed at the Bi sites. The obtained compounds are stable up to their melting point based on the DSC analysis data. Real dielectric permittivity ε' of the Bi1.6Mg0.8-xNixNb1.6O7-δ samples decreases from 80 to 65 with the temperature decrease from 25 to 700 °C and practically does not depend on frequency in the range of 1–1000 kHz. Oxides Bi1.6Mg0.8-xNixNb1.6O7-δ behave like insulators up to 280 °C, their conductivity increases with temperature (Ea,dc ≈ 1.3 eV, dc and with the Ni content at a given temperature.

  5. Higher Order Elastic Constants, Gruneisen Parameters and Lattice Thermal Expansion of Lithium Niobate

    Directory of Open Access Journals (Sweden)

    Thresiamma Philip

    2006-01-01

    Full Text Available The second and third-order elastic constants and pressure derivatives of second- order elastic constants of trigonal LiNbO3 (lithium niobate have been obtained using the deformation theory. The strain energy density estimated using finite strain elasticity is compared with the strain dependent lattice energy density obtained from the elastic continuum model approximation. The second-order elastic constants and the non-vanishing third-order elastic constants along with the pressure derivatives of trigonal LiNbO3 are obtained in the present work. The second and third-order elastic constants are compared with available experimental values. The second-order elastic constant C11 which corresponds to the elastic stiffness along the basal plane of the crystal is less than C33 which corresponds to the elastic stiffness tensor component along the c-axis of the crystal. The pressure derivatives, dC'ij/dp obtained in the present work, indicate that trigonal LiNbO3 is compressible. The higher order elastic constants are used to find the generalized Gruneisen parameters of the elastic waves propagating in different directions in LiNbO3. The Brugger gammas are evaluated and the low temperature limit of the Gruneisen gamma is obtained. The results are compared with available reported values.

  6. The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition

    OpenAIRE

    Liu, S; Gu, Fengshou; Ball, Andrew

    2002-01-01

    This paper proposes a technique for the online detection of incipient engine misfire based on multiple feature fusion and fuzzy pattern recognition. The technique requires the measurement of instantaneous angular velocity signals. By processing the engine dynamics model equation in the angular frequency domain, four dimensionless features for misfire detection are defined, along with fast feature-extracting algorithms. By directly analysing the waveforms of the angular velocity and the angula...

  7. Murine leukemia virus-derived retroviral vector has differential integration patterns in human cell lines used to produce recombinant factor VIII

    Directory of Open Access Journals (Sweden)

    Marcela Cristina Correa de Freitas

    2014-06-01

    Full Text Available OBJECTIVE: Nowadays recombinant factor VIII is produced in murine cells including in Chinese hamster ovary (CHO and baby hamster kidney cells (BHK. Previous studies, using the murine leukemia virus-derived retroviral vector pMFG-FVIII-P140K, modified two recombinant human cell lines, HepG2 and Hek293 to produce recombinant factor VIII. In order to characterize these cells, the present study aimed to analyze the integration pattern of retroviral vector pMFG-FVIII-P140K.METHODS: This study used ligation-mediated polymerase chain reaction to locate the site of viral vector integration by sequencing polymerase chain reaction products. The sequences were compared to genomic databases to characterize respective clones.RESULTS: The retroviral vector presented different and non-random profiles of integration between cells lines. A preference of integration for chromosomes 19, 17 and 11 was observed for HepG2FVIIIdB/P140K and chromosome 9 for Hek293FVIIIdB/P140K. In genomic regions such as CpG islands and transcription factor binding sites, there was no difference in the integration profiles for both cell lines. Integration in intronic regions of encoding protein genes (RefSeq genes was also observed in both cell lines. Twenty percent of integrations occurred at fragile sites in the genome of the HepG2 cell line and 17% in Hek293.CONCLUSION: The results suggest that the cell type can affect the profile of chromosomal integration of the retroviral vector used; these differences may interfere in the level of expression of recombinant proteins.

  8. Computational wavelength resolution for in-line lensless holography: phase-coded diffraction patterns and wavefront group-sparsity

    Science.gov (United States)

    Katkovnik, Vladimir; Shevkunov, Igor; Petrov, Nikolay V.; Egiazarian, Karen

    2017-06-01

    In-line lensless holography is considered with a random phase modulation at the object plane. The forward wavefront propagation is modelled using the Fourier transform with the angular spectrum transfer function. The multiple intensities (holograms) recorded by the sensor are random due to the random phase modulation and noisy with Poissonian noise distribution. It is shown by computational experiments that high-accuracy reconstructions can be achieved with resolution going up to the two thirds of the wavelength. With respect to the sensor pixel size it is a super-resolution with a factor of 32. The algorithm designed for optimal superresolution phase/amplitude reconstruction from Poissonian data is based on the general methodology developed for phase retrieval with a pixel-wise resolution in V. Katkovnik, "Phase retrieval from noisy data based on sparse approximation of object phase and amplitude", http://www.cs.tut.fi/ lasip/DDT/index3.html.

  9. High throughput generation of promoter reporter (GFP transgenic lines of low expressing genes in Arabidopsis and analysis of their expression patterns

    Directory of Open Access Journals (Sweden)

    Xiao Yong-Li

    2010-08-01

    Full Text Available Abstract Background Although the complete genome sequence and annotation of Arabidopsis were released at the end of year 2000, it is still a great challenge to understand the function of each gene in the Arabidopsis genome. One way to understand the function of genes on a genome-wide scale is expression profiling by microarrays. However, the expression level of many genes in Arabidopsis genome cannot be detected by microarray experiments. In addition, there are many more novel genes that have been discovered by experiments or predicted by new gene prediction programs. Another way to understand the function of individual genes is to investigate their in vivo expression patterns by reporter constructs in transgenic plants which can provide basic information on the patterns of gene expression. Results A high throughput pipeline was developed to generate promoter-reporter (GFP transgenic lines for Arabidopsis genes expressed at very low levels and to examine their expression patterns in vivo. The promoter region from a total of 627 non- or low-expressed genes in Arabidopsis based on Arabidopsis annotation release 5 were amplified and cloned into a Gateway vector. A total of 353 promoter-reporter (GFP constructs were successfully transferred into Agrobacterium (GV3101 by triparental mating and subsequently used for Arabidopsis transformation. Kanamycin-resistant transgenic lines were obtained from 266 constructs and among them positive GFP expression was detected from 150 constructs. Of these 150 constructs, multiple transgenic lines exhibiting consistent expression patterns were obtained for 112 constructs. A total 81 different regions of expression were discovered during our screening of positive transgenic plants and assigned Plant Ontology (PO codes. Conclusions Many of the genes tested for which expression data were lacking previously are indeed expressed in Arabidopsis during the developmental stages screened. More importantly, our study

  10. Potassium Sodium Niobate-Based Lead-Free Piezoelectric Multilayer Ceramics Co-Fired with Nickel Electrodes

    Directory of Open Access Journals (Sweden)

    Shinichiro Kawada

    2015-11-01

    Full Text Available Although lead-free piezoelectric ceramics have been extensively studied, many problems must still be overcome before they are suitable for practical use. One of the main problems is fabricating a multilayer structure, and one solution attracting growing interest is the use of lead-free multilayer piezoelectric ceramics. The paper reviews work that has been done by the authors on lead-free alkali niobate-based multilayer piezoelectric ceramics co-fired with nickel inner electrodes. Nickel inner electrodes have many advantages, such as high electromigration resistance, high interfacial strength with ceramics, and greater cost effectiveness than silver palladium inner electrodes. However, widely used lead zirconate titanate-based ceramics cannot be co-fired with nickel inner electrodes, and silver palladium inner electrodes are usually used for lead zirconate titanate-based piezoelectric ceramics. A possible alternative is lead-free ceramics co-fired with nickel inner electrodes. We have thus been developing lead-free alkali niobate-based multilayer ceramics co-fired with nickel inner electrodes. The normalized electric-field-induced thickness strain (Smax/Emax of a representative alkali niobate-based multilayer ceramic structure with nickel inner electrodes was 360 pm/V, where Smax denotes the maximum strain and Emax denotes the maximum electric field. This value is about half that for the lead zirconate titanate-based ceramics that are widely used. However, a comparable value can be obtained by stacking more ceramic layers with smaller thicknesses. In the paper, the compositional design and process used to co-fire lead-free ceramics with nickel inner electrodes are introduced, and their piezoelectric properties and reliabilities are shown. Recent advances are introduced, and future development is discussed.

  11. Potassium Sodium Niobate-Based Lead-Free Piezoelectric Multilayer Ceramics Co-Fired with Nickel Electrodes

    Science.gov (United States)

    Kawada, Shinichiro; Hayashi, Hiroyuki; Ishii, Hideki; Kimura, Masahiko; Ando, Akira; Omiya, Suetake; Kubodera, Noriyuki

    2015-01-01

    Although lead-free piezoelectric ceramics have been extensively studied, many problems must still be overcome before they are suitable for practical use. One of the main problems is fabricating a multilayer structure, and one solution attracting growing interest is the use of lead-free multilayer piezoelectric ceramics. The paper reviews work that has been done by the authors on lead-free alkali niobate-based multilayer piezoelectric ceramics co-fired with nickel inner electrodes. Nickel inner electrodes have many advantages, such as high electromigration resistance, high interfacial strength with ceramics, and greater cost effectiveness than silver palladium inner electrodes. However, widely used lead zirconate titanate-based ceramics cannot be co-fired with nickel inner electrodes, and silver palladium inner electrodes are usually used for lead zirconate titanate-based piezoelectric ceramics. A possible alternative is lead-free ceramics co-fired with nickel inner electrodes. We have thus been developing lead-free alkali niobate-based multilayer ceramics co-fired with nickel inner electrodes. The normalized electric-field-induced thickness strain (Smax/Emax) of a representative alkali niobate-based multilayer ceramic structure with nickel inner electrodes was 360 pm/V, where Smax denotes the maximum strain and Emax denotes the maximum electric field. This value is about half that for the lead zirconate titanate-based ceramics that are widely used. However, a comparable value can be obtained by stacking more ceramic layers with smaller thicknesses. In the paper, the compositional design and process used to co-fire lead-free ceramics with nickel inner electrodes are introduced, and their piezoelectric properties and reliabilities are shown. Recent advances are introduced, and future development is discussed. PMID:28793646

  12. Analysis of Patterns of Interaction and Knowledge Construction in On-Line Learning Environments: A Methodological Strategy

    Directory of Open Access Journals (Sweden)

    Benilde García Cabrero

    2008-05-01

    Full Text Available A model of analysis of interaction and construction of knowledge in educational environments based on computer-mediated communication (CMC is proposed. This proposal considers: 1 the contextual factors that constitute the input and the scenario of interaction, 2 the interaction processes: types of interaction and its contents (Garrison, Anderson and Archer, 2000 as well as the discursive strategies (Lemke, 1997, and 3 learning results that involve the quality of the knowledge constructed by the participants (Gunawardena, Lowe and Anderson, 1997. This model was applied to the analysis of the interaction among a group of participants in two web forums (with or without the presence of a teacher, during the teaching of a PhD in Psychology program. The results show evidence of the model’s viability to describe the patterns of interaction and the levels of construction of knowledge in web forums.

  13. Conversion of broadband IR radiation and structural disorder in lithium niobate single crystals with low photorefractive effect

    Science.gov (United States)

    Litvinova, Man Nen; Syuy, Alexander V.; Krishtop, Victor V.; Pogodina, Veronika A.; Ponomarchuk, Yulia V.; Sidorov, Nikolay V.; Gabain, Aleksei A.; Palatnikov, Mikhail N.; Litvinov, Vladimir A.

    2016-11-01

    The conversion of broadband IR radiation when the noncritical phase matching condition is fulfilled in lithium niobate (LiNbO3) single crystals with stoichiometric (R = Li/Nb = 1) and congruent (R = 0.946) compositions, as well as in congruent single crystals doped with zinc has been investigated. It is shown that the spectrum parameters of converted radiation, such as the conversion efficiency, spectral width and position of maximum, depend on the ordering degree of structural units of the cation sublattice along the polar axis of crystal.

  14. Study of Er+ ion-implanted lithium niobate structure after an annealing procedure by RBS and RBS/channelling

    Czech Academy of Sciences Publication Activity Database

    Macková, Anna; Malinský, Petr; Švecová, B.; Nekvindová, P.; Groetzschel, R.

    2010-01-01

    Roč. 268, 11-12 (2010), s. 2042-2045 ISSN 0168-583X. [19th International conference on Ion beam analysis. Cambridge, 07.09.2009-11.09.2009] R&D Projects: GA MŠk(CZ) LC06041; GA ČR GA106/09/0125 Institutional research plan: CEZ:AV0Z10480505 Keywords : Lithium niobate * Erbium * Ion implantation Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.042, year: 2010

  15. The compact converter of Bessel beams of zero and second orders on the basis of z-cut lithium niobate

    International Nuclear Information System (INIS)

    Paranin, V D; Karpeev, S V; Khonina, S N; Tukmakov, K N

    2016-01-01

    Transformation of zero-order Bessel beams into a second-order vortex beam in the process of propagation in a c-cut of lithium niobate LiNbO 3 crystal has been investigated experimentally. The possibility of controlling beam transformation by means of changing the curve radius of the illuminating beam is shown. The possibility of Bessel beam transforming by compact devices on the basis of thin c-cuts of uniaxial crystals with a diffraction mask formed on their surface is proved. (paper)

  16. Ion-beam enhanced etching for the 3D structuration of lithium niobate

    International Nuclear Information System (INIS)

    Gischkat, Thomas

    2010-01-01

    The present thesis deals with the usage of the ion-beam enhanced etching (IBEE) for the 3D structuration of lithium niobate (LiNbO 3 ).Hereby the approach of the enhancement of the wet-chemical etching rate due to the irradiation with energetic ions is pursued. This method is very success promising for the realization of micro- and nanostructures with perpendicular structural walls as well as small roughnesses. The aim of this thesis consisted therein to form the foundations for the realization of three-dimensional micro- and nanostructures (for instance: Layer systems and photonic crystals) in LiNbO 3 with high optical quality and to demonstrate on selected examples. Conditions for the success of the IBEE structuration technique is first of all the understanding of the defect formation under ion irradiation as well as the radiation-induced structure changes in the crystal and the change of the chemical resistance connected with this. For this the defect formation was studied in dependence on th ion mass, the ion energy, and the irradiation temperature. Thermally induced influences and effects on the radiation damage, as they can occur in intermediate steps in the complex processing, must be known and were studied by means of subsequent temperature treatment. The results from the defect studies were subsequently applied for the fabrication of micro- and nanostructures in LiNbO 3 . Shown is the realization of lateral structure with nearly perpendicular structure walls as well as the realization of thin membranes and slits. The subsequent combination of lateral structuration with the fabrication of thin membranes and slits allowed the three-dimensional structuration of LiNbO 3 . This is exemplarily shown for a microresonator and for a 2D photonic crystal with below lying air slit. [de

  17. Interface modulated currents in periodically proton exchanged Mg doped lithium niobate

    Energy Technology Data Exchange (ETDEWEB)

    Neumayer, Sabine M.; Rodriguez, Brian J., E-mail: brian.rodriguez@ucd.ie, E-mail: gallo@kth.se [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland); Conway Institute of Biomolecular and Biomedical Research, University College Dublin, Belfield, Dublin 4 (Ireland); Manzo, Michele; Gallo, Katia, E-mail: brian.rodriguez@ucd.ie, E-mail: gallo@kth.se [Department of Applied Physics, KTH-Royal Institute of Technology, Roslagstullbacken 21, 10691 Stockholm (Sweden); Kholkin, Andrei L. [Department of Physics and CICECO-Aveiro Institute of Materials, 3810-193 Aveiro, Portugal and Institute of Natural Sciences, Ural Federal University, 620000 Ekaterinburg (Russian Federation)

    2016-03-21

    Conductivity in Mg doped lithium niobate (Mg:LN) plays a key role in the reduction of photorefraction and is therefore widely exploited in optical devices. However, charge transport through Mg:LN and across interfaces such as electrodes also yields potential electronic applications in devices with switchable conductivity states. Furthermore, the introduction of proton exchanged (PE) phases in Mg:LN enhances ionic conductivity, thus providing tailorability of conduction mechanisms and functionality dependent on sample composition. To facilitate the construction and design of such multifunctional electronic devices based on periodically PE Mg:LN or similar ferroelectric semiconductors, fundamental understanding of charge transport in these materials, as well as the impact of internal and external interfaces, is essential. In order to gain insight into polarization and interface dependent conductivity due to band bending, UV illumination, and chemical reactivity, wedge shaped samples consisting of polar oriented Mg:LN and PE phases were investigated using conductive atomic force microscopy. In Mg:LN, three conductivity states (on/off/transient) were observed under UV illumination, controllable by the polarity of the sample and the externally applied electric field. Measurements of currents originating from electrochemical reactions at the metal electrode–PE phase interfaces demonstrate a memresistive and rectifying capability of the PE phase. Furthermore, internal interfaces such as domain walls and Mg:LN–PE phase boundaries were found to play a major role in the accumulation of charge carriers due to polarization gradients, which can lead to increased currents. The insight gained from these findings yield the potential for multifunctional applications such as switchable UV sensitive micro- and nanoelectronic devices and bistable memristors.

  18. Composition-Driven Phase Boundary and Piezoelectricity in Potassium-Sodium Niobate-Based Ceramics.

    Science.gov (United States)

    Zheng, Ting; Wu, Jiagang; Xiao, Dingquan; Zhu, Jianguo; Wang, Xiangjian; Lou, Xiaojie

    2015-09-16

    The piezoelectricity of (K,Na)NbO3 ceramics strongly depends on the phase boundary types as well as the doped compositions. Here, we systematically studied the relationships between the compositions and phase boundary types in (K,Na) (Nb,Sb)O3-Bi0.5Na0.5AO3 (KNNS-BNA, A=Hf, Zr, Ti, Sn) ceramics; then their piezoelectricity can be readily modified. Their phase boundary types are determined by the doped elements. A rhombohedral-tetragonal (R-T) phase boundary can be driven in the compositions range of 0.035≤BNH≤0.040 and 0.035≤BNZ≤0.045; an orthorhombic-tetragonal (O-T) phase boundary is formed in the composition range of 0.005≤BNT≤0.02; and a pure O phase can be only observed regardless of BNS content (≤0.01). In addition, the phase boundary types strongly affect their corresponding piezoelectricities. A larger d33 (∼440-450 pC/N) and a higher d33* (∼742-834 pm/V) can be attained in KNNS-BNA (A=Zr and Hf) ceramics due to the involvement of R-T phase boundary, and unfortunately KNNS-BNA (A=Sn and Ti) ceramics possess a relatively poor piezoelectricity (d33≤200 and d33*piezoelectricity and phase boundary types were also discussed. We believe that comprehensive research can design more excellent ceramic systems concerning potassium-sodium niobate.

  19. Photonic guiding structures in lithium niobate crystals produced by energetic ion beams

    Science.gov (United States)

    Chen, Feng

    2009-10-01

    A range of ion beam techniques have been used to fabricate a variety of photonic guiding structures in the well-known lithium niobate (LiNbO3 or LN) crystals that are of great importance in integrated photonics/optics. This paper reviews the up-to-date research progress of ion-beam-processed LiNbO3 photonic structures and reports on their fabrication, characterization, and applications. Ion beams are being used with this material in a wide range of techniques, as exemplified by the following examples. Ion beam milling/etching can remove the selected surface regions of LiNbO3 crystals via the sputtering effects. Ion implantation and swift ion irradiation can form optical waveguide structures by modifying the surface refractive indices of the LiNbO3 wafers. Crystal ion slicing has been used to obtain bulk-quality LiNbO3 single-crystalline thin films or membranes by exfoliating the implanted layer from the original substrate. Focused ion beams can either generate small structures of micron or submicron dimensions, to realize photonic bandgap crystals in LiNbO3, or directly write surface waveguides or other guiding devices in the crystal. Ion beam-enhanced etching has been extensively applied for micro- or nanostructuring of LiNbO3 surfaces. Methods developed to fabricate a range of photonic guiding structures in LiNbO3 are introduced. Modifications of LiNbO3 through the use of various energetic ion beams, including changes in refractive index and properties related to the photonic guiding structures as well as to the materials (i.e., electro-optic, nonlinear optic, luminescent, and photorefractive features), are overviewed in detail. The application of these LiNbO3 photonic guiding structures in both micro- and nanophotonics are briefly summarized.

  20. Preparation and enhanced visible-light photocatalytic activity of graphitic carbon nitride/bismuth niobate heterojunctions.

    Science.gov (United States)

    Zhang, Shengqu; Yang, Yuxin; Guo, Yingna; Guo, Wan; Wang, Mei; Guo, Yihang; Huo, Mingxin

    2013-10-15

    A series of graphitic carbon nitride/bismuth niobate (g-C3N4/Bi5Nb3O15) heterojunctions with g-C3N4 doping level of 10-90 wt% were prepared by a facile milling-heat treatment method. The phase and chemical structures, surface compositions, electronic and optical properties as well as morphologies of the prepared g-C3N4/Bi5Nb3O15 were well-characterized. Subsequently, the photocatalytic activity and stability of g-C3N4/Bi5Nb3O15 were evaluated by the degradation of aqueous methyl orange (MO) and 4-chlorophenol (4-CP) under the visible-light irradiation. At suitable g-C3N4 doping levels, g-C3N4/Bi5Nb3O15 exhibited enhanced visible-light photocatalytic activity compared with pure g-C3N4 or Bi5Nb3O15. This excellent photocatalytic activity was revealed in terms of the extension of visible-light response and efficient separation and transportation of the photogenerated electrons and holes due to coupling of g-C3N4 and Bi5Nb3O15. Additionally, the active species yielded in the pure g-C3N4- and g-C3N4/Bi5Nb3O15-catalyzed 4-CP photodegradation systems were investigated by the free radical and hole scavenging experiments. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. Convergent Lines of Descent: Symptoms, Patterns, Constellations, and the Emergent Interface of Systems Biology and Chinese Medicine.

    Science.gov (United States)

    Scheid, Volker

    2014-03-01

    During the first decade of the twenty-first century, a network composed of politicians, regulators, bioscientists, clinical researchers, and Chinese medicine specialists has emerged that seeks to bridge an imagined gulf between the modern West and ancient China in order to create a new type of personalized medicine. The central building block of this bridge is the Chinese medical concept of zheng /, variously translated into English as syndrome, pattern, or type. My paper places side by side two different genealogies of how zheng assumed this central role. The first genealogy examines the process by means of which zheng came to be considered as something shared by both ancient China and cutting-edge biological science and, by extension, how it manages to hold together the entire institutional, political, and economic framework into which this bridge is embedded and which it co-creates. The second genealogy shows zheng to be central to a much older series of redefinitions of Chinese medicine and Chinese medical practice that extend from the eleventh century to the present. Read together, these two genealogies-neither of which should be seen as exhaustive-raise three important issues that are further discussed in the conclusion of the paper. First, I explore how the concept of zheng has come to tie a medical tradition derided by its adversaries for being a pseudoscience to one of the most cutting-edge fields of bioscience research. I ask what is at stake in this synthesis, for whom, and why, and how it transforms Chinese medicine and/or systems biology along the way. Second, I am interested in finding out how and why the very same concept can be at the heart of two apparently agonistic visions of Chinese medicine's future as it is popularly imagined in China today. Finally, I insist that the medical humanities need to become actively involved in the construction of emergent articulations such as the ones I am exploring. Merely writing a history of the present will

  2. Nested sampling at karst springs: from basic patterns to event triggered sampling and on-line monitoring.

    Science.gov (United States)

    Stadler, Hermann; Skritek, Paul; Zerobin, Wolfgang; Klock, Erich; Farnleitner, Andreas H.

    2010-05-01

    In the last year, global changes in ecosystems, the growth of population, and modifications of the legal framework within the EU have caused an increased need of qualitative groundwater and spring water monitoring with the target to continue to supply the consumers with high-quality drinking water in the future. Additionally the demand for sustainable protection of drinking water resources effected the initiated implementation of early warning systems and quality assurance networks in water supplies. In the field of hydrogeological investigations, event monitoring and event sampling is worst case scenario monitoring. Therefore, such tools become more and more indispensible to get detailed information about aquifer parameter and vulnerability. In the framework of water supplies, smart sampling designs combined with in-situ measurements of different parameters and on-line access can play an important role in early warning systems and quality surveillance networks. In this study nested sampling tiers are presented, which were designed to cover total system dynamic. Basic monitoring sampling (BMS), high frequency sampling (HFS) and automated event sampling (AES) were combined. BMS was organized with a monthly increment for at least two years, and HFS was performed during times of increased groundwater recharge (e.g. during snowmelt). At least one AES tier was embedded in this system. AES was enabled by cross-linking of hydrological stations, so the system could be run fully automated and could include real-time availability of data. By means of networking via Low Earth Orbiting Satellites (LEO-satellites), data from the precipitation station (PS) in the catchment area are brought together with data from the spring sampling station (SSS) without the need of terrestrial infrastructure for communication and power supply. Furthermore, the whole course of input and output parameters, like precipitation (input system) and discharge (output system), and the status of the

  3. The B-ring hydroxylation pattern of intermediates of anthocyanin synthesis in pelargonidin-and cyanidin-producing lines of Matthiola incana.

    Science.gov (United States)

    Forkmann, G

    1980-03-01

    In flowers of Matthiola incana, the B-ring hydroxylation pattern of anthocyanins is controlled by the locus b. Recessive genotypes produce pelargonidin and genotypes with wild-type alleles cyanidin as the aglycone. Supplementation experiments on acyanic flowers using extracts of pelargonidin-and cyanidin-producing flowers, respectively, showed not only the presence of compounds with a precursor function for anthocyanin synthesis in the cyanic flowers but also differences in the B-ring hydroxylation pattern of these compounds. Chromatographic investigations proved that flavanones and dihydroflavonols occur in extracts of cyanic flowers. Naringenin, dihydrokaempferol, and their 7-glucosides could be demonstrated in all flower extracts, but in extracts of cyanidin-producing flowers, dihydroquercetin and a further 3', 4'-hydroxylated dihydroflavonol, tentatively identified as dihydroquercetin 3-glycoside, were additionally found. In no case, however, could eriodictyol be detected. From these results and from the ready hydroxylation of dihydrokaempferol to dihydroquercetin in a white mutant line of Matthiola incana, it can be concluded that introduction of the 3'-hydroxyl group of anthocyanins is not achieved by specific incorporation of caffeic acid during synthesis of the flavonoid skeleton, but by hydroxylation at the dihydroflavonol stage.

  4. Dispensing nano-pico droplets and liquid patterning by pyroelectrodynamic shooting.

    Science.gov (United States)

    Ferraro, P; Coppola, S; Grilli, S; Paturzo, M; Vespini, V

    2010-06-01

    Manipulating and dispensing liquids on the micrometre- and nanoscale is important in biotechnology and combinatorial chemistry, and also for patterning inorganic, organic and biological inks. Several methods for dispensing liquids exist, but many require complicated electrodes and high-voltage circuits. Here, we show a simple way to draw attolitre liquid droplets from one or multiple sessile drops or liquid film reservoirs using a pyroelectrohydrodynamic dispenser. Local pyroelectric forces, which are activated by scanning a hot tip or an infrared laser beam over a lithium niobate substrate, draw liquid droplets from the reservoir below the substrate, and deposit them on the underside of the lithium niobate substrate. The shooting direction is altered by moving the hot tip or laser to form various patterns at different angles and locations. Our system does not require electrodes, nozzles or circuits, and is expected to have many applications in biochemical assays and various transport and mixing processes.

  5. The development of potassium tantalate niobate thin films for satellite-based pyroelectric detectors

    Energy Technology Data Exchange (ETDEWEB)

    Cherry, Hilary B.B. [Univ. of California, Berkeley, CA (United States). Dept. of Materials Science and Mineral Engineering

    1997-05-01

    Potassium tantalate niobate (KTN) pyroelectric detectors are expected to provide detectivities, of 3.7 x 1011 cmHz 1/2W-1 for satellite-based infrared detection at 90 K. The background limited detectivity for a room-temperature thermal detector is 1.8 x 1010 cmHz1/2W-1 . KTN is a unique ferroelectric for this application because of the ability to tailor the temperature of its pyroelectric response by adjusting its ratio of tantalum to niobium. The ability to fabricate high quality KTN thin films on Si-based substrates is crucial to the development of KTN pyroelectric detectors. SixNymembranes created on the Si substrate will provide the weak thermal link necessary to reach background limited detectivities. The device dimensions obtainable by thin film processing are expected to increase the ferroelectric response by 20 times over bulk fabricated KTN detectors. In addition, microfabrication techniques allow for easier array development. This is the first reported attempt at growth of KTN films on Si-based substrates. Pure phase perovskite films were grown by pulsed laser deposition on SrRuO3/Pt/Ti/SixNy/Si and SrRuO3/SixNy/Si structures; room temperature dielectric permittivities for the KTN films were 290 and 2.5, respectively. The dielectric permittivity for bulk grown, single crystal KTN is ~380. In addition to depressed dielectric permittivities, no ferroelectric hysteresis was found between 80 and 300 K for either structure. RBS, AES, TEM and multi-frequency dielectric measurements were used to investigate the origin of this apparent lack of ferroelectricity. Other issues addressed by this dissertation include: the role of oxygen and target density during pulsed laser deposition of KTN thin films; the use of YBCO, LSC and Pt as direct contact bottom electrodes to the KTN films, and the adhesion of the bottom

  6. Metastable Cu(I)-niobate semiconductor with a low-temperature, nanoparticle-mediated synthesis.

    Science.gov (United States)

    Choi, Jonglak; King, Nacole; Maggard, Paul A

    2013-02-26

    A nanoparticle synthetic strategy for the preparation of a new metastable Cu(I)-niobate is described, and that involves multipored Li₃NbO₄ nanoparticles as a precursor. A hydrothermal reaction of HNbO₃ and LiOH·H₂O in PEG200 and water at ∼180 °C yields ∼15-40 nm Li₃NbO₄ particles. These particles are subsequently used in a solvothermal copper(I)-exchange reaction with excess CuCl at 150 °C. Heating these products within the used CuCl flux (mp = 430 °C) to 450 °C for 30 min yields ∼4-12 nm Cu₂Nb₈O₂₁ crystalline nanoparticles, and for a heating time of 24 h yields μm-sized, rod-shaped crystals. The new structure was characterized by single-crystal X-ray diffraction to have a condensed network consisting of NbO₇ polyhedra and chains of elongated CuO₄ tetrahedra. The compound thermally decomposes starting at ∼250 °C and higher temperatures, depending on the particle sizes, owing to the loss of the weakly coordinated Cu(I) cations from the structure and a concurrent disproportionation reaction at its surfaces. Thus, conventional solid-state reactions involving higher temperatures and bulk reagents have proven unsatisfactory for its synthesis. The measured bandgap size is ∼1.43-1.65 eV (indirect) and shows a dependence on the particle sizes. Electronic structure calculations based on density functional theory show that the bandgap transition results from the excitation of electrons at the band edges between filled Cu(I) 3d¹⁰-orbitals and empty Nb(V) 4d⁰-orbitals, respectively. The p-type nature of the Cu₂Nb₈O₂₁ particles was confirmed in photoelectrochemical measurements on polycrystalline films that show a strong photocathodic current under visible-light irradiation in aqueous solutions. These results demonstrate the general utility of reactive nanoscale precursors in the synthetic discovery of new Cu(I)-based semiconducting oxides and which also show promise for use in solar energy conversion applications.

  7. Identification of human papillomavirus (HPV) 16 DNA integration and the ensuing patterns of methylation in HPV-associated head and neck squamous cell carcinoma cell lines.

    Science.gov (United States)

    Hatano, Takashi; Sano, Daisuke; Takahashi, Hideaki; Hyakusoku, Hiroshi; Isono, Yasuhiro; Shimada, Shoko; Sawakuma, Kae; Takada, Kentaro; Oikawa, Ritsuko; Watanabe, Yoshiyuki; Yamamoto, Hiroyuki; Itoh, Fumio; Myers, Jeffrey N; Oridate, Nobuhiko

    2017-04-01

    Recent studies showed that human papillomavirus (HPV) integration contributes to the genomic instability seen in HPV-associated head and neck squamous cell carcinoma (HPV-HNSCC). However, the epigenetic alterations induced after HPV integration remains unclear. To identify the molecular details of HPV16 DNA integration and the ensuing patterns of methylation in HNSCC, we performed next-generation sequencing using a target-enrichment method for the effective identification of HPV16 integration breakpoints as well as the characterization of genomic sequences adjacent to HPV16 integration breakpoints with three HPV16-related HNSCC cell lines. The DNA methylation levels of the integrated HPV16 genome and that of the adjacent human genome were also analyzed by bisulfite pyrosequencing. We found various integration loci, including novel integration sites. Integration loci were located predominantly in the intergenic region, with a significant enrichment of the microhomologous sequences between the human and HPV16 genomes at the integration breakpoints. Furthermore, various levels of methylation within both the human genome and the integrated HPV genome at the integration breakpoints in each integrant were observed. Allele-specific methylation analysis suggested that the HPV16 integrants remained hypomethylated when the flanking host genome was hypomethylated. After integration into highly methylated human genome regions, however, the HPV16 DNA became methylated. In conclusion, we found novel integration sites and methylation patterns in HPV-HNSCC using our unique method. These findings may provide insights into understanding of viral integration mechanism and virus-associated carcinogenesis of HPV-HNSCC. © 2016 UICC.

  8. Integrated source of tunable nonmaximally mode-entangled photons in a domain-engineered lithium niobate waveguide

    Energy Technology Data Exchange (ETDEWEB)

    Ming, Yang; Wu, Zi-jian; Xu, Fei, E-mail: feixu@nju.edu.cn; Lu, Yan-qing, E-mail: yqlu@nju.edu.cn [National Laboratory of Solid State Microstructures and College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Cui, Guo-xin [National Laboratory of Solid State Microstructures and College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Key Laboratory of Nanodevices and Nanoapplications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215000 (China); Tan, Ai-hong [Laboratory for Quantum Information, China Jiliang University, Hangzhou 310018 (China)

    2014-04-28

    The nonmaximally entangled state is a special kind of entangled state, which has important applications in quantum information processing. It has been generated in quantum circuits based on bulk optical elements. However, corresponding schemes in integrated quantum circuits have been rarely considered. In this Letter, we propose an effective solution for this problem. An electro-optically tunable nonmaximally mode-entangled photon state is generated in an on-chip domain-engineered lithium niobate (LN) waveguide. Spontaneous parametric down-conversion and electro-optic interaction are effectively combined through suitable domain design to transform the entangled state into our desired formation. Moreover, this is a flexible approach to entanglement architectures. Other kinds of reconfigurable entanglements are also achievable through this method. LN provides a very promising platform for future quantum circuit integration.

  9. Consistent Atomic Geometries and Electronic Structure of Five Phases of Potassium Niobate from Density-Functional Theory

    Directory of Open Access Journals (Sweden)

    Falko Schmidt

    2017-01-01

    Full Text Available We perform a comprehensive theoretical study of the structural and electronic properties of potassium niobate (KNbO3 in the cubic, tetragonal, orthorhombic, monoclinic, and rhombohedral phase, based on density-functional theory. The influence of different parametrizations of the exchange-correlation functional on the investigated properties is analyzed in detail, and the results are compared to available experimental data. We argue that the PBEsol and AM05 generalized gradient approximations as well as the RTPSS meta-generalized gradient approximation yield consistently accurate structural data for both the external and internal degrees of freedom and are overall superior to the local-density approximation or other conventional generalized gradient approximations for the structural characterization of KNbO3. Band-structure calculations using a HSE-type hybrid functional further indicate significant near degeneracies of band-edge states in all phases which are expected to be relevant for the optical response of the material.

  10. Agile multicasting based on cascaded χ(2) nonlinearities in a step-chirped periodically poled lithium niobate.

    Science.gov (United States)

    Ahlawat, Meenu; Bostani, Ameneh; Tehranchi, Amirhossein; Kashyap, Raman

    2013-08-01

    We experimentally demonstrate the possibility of agile multicasting for wavelength division multiplexing (WDM) networks, of a single-channel to two and seven channels over the C band, also extendable to S and L bands. This is based on cascaded χ(2) nonlinear mixing processes, namely, second-harmonic generation (SHG)-sum-frequency generation (SFG) and difference-frequency generation (DFG) in a 20-mm-long step-chirped periodically poled lithium niobate crystal, specially designed and fabricated for a 28-nm-wide SH-SF bandwidth centered at around 1.55 μm. The multiple idlers are simultaneously tuned by detuning the pump wavelengths within the broad SH-SF bandwidth. By selectively tuning the pump wavelengths over less than 10 and 6 nm, respectively, multicasting into two and seven idlers is successfully achieved across ~70 WDM channels within the 50 GHz International Telecommunication Union grid spacing.

  11. Self-Growth of Centimeter-Scale Single Crystals by Normal Sintering Process in Modified Potassium Sodium Niobate Ceramics

    Science.gov (United States)

    Ahn, Cheol-Woo; Lee, Ho-Yong; Han, Guifang; Zhang, Shujun; Choi, Si-Young; Choi, Jong-Jin; Kim, Jong-Woo; Yoon, Woon-Ha; Choi, Joon-Hwan; Park, Dong-Soo; Hahn, Byung-Dong; Ryu, Jungho

    2015-01-01

    In this manuscript, an interesting phenomenon is reported. That is the self-growth of single crystals in Pb-free piezoelectric ceramics. These crystals are several centimeters in size. They are grown without any seed addition through a normal sintering process in modified potassium sodium niobate ceramics. It has been achieved by the composition designed to compensate the Na+ loss which occurs during the liquid phase sintering. The composition of the crystals is (K0.4925Na0.4925−xBa0.015+x/2)Nb0.995+xO3 [x is determined by the Na+ loss, due to Na2O volatilization]. These crystals have high piezoelectric voltage coefficients (g33, 131 10−3Vm/N), indicating that they are good candidates for piezoelectric sensors and energy harvesting devices. We hope that this report can offer the opportunity for many researchers to have an interest in these crystals. PMID:26631973

  12. Enhanced Cherenkov phase matching terahertz wave generation via a magnesium oxide doped lithium niobate ridged waveguide crystal

    Directory of Open Access Journals (Sweden)

    K. Takeya

    2017-01-01

    Full Text Available When combined with a nonlinear waveguide crystal, Cherenkov phase matching allows for highly effective generation of high power and broadband terahertz (THz waves. Using a ridged Lithium Niobate (LiNbO3 waveguide coupled with a specially designed silicon lens, we successfully generated THz waves with intensity of approximately three orders of magnitude stronger than those from conventional photoconductive antenna. The broadband spectrum was from 0.1 THz to 7 THz with a maximum dynamic range of 80 dB. The temporal shape of time domain pulse is a regular single cycle which could be used for high depth resolution time of flight tomography. The generated THz wave can also be easily monitored by compact room-temperature THz camera, enabling us to determine the spatial characteristics of the THz propagation.

  13. Integrated source of tunable nonmaximally mode-entangled photons in a domain-engineered lithium niobate waveguide

    International Nuclear Information System (INIS)

    Ming, Yang; Wu, Zi-jian; Xu, Fei; Lu, Yan-qing; Cui, Guo-xin; Tan, Ai-hong

    2014-01-01

    The nonmaximally entangled state is a special kind of entangled state, which has important applications in quantum information processing. It has been generated in quantum circuits based on bulk optical elements. However, corresponding schemes in integrated quantum circuits have been rarely considered. In this Letter, we propose an effective solution for this problem. An electro-optically tunable nonmaximally mode-entangled photon state is generated in an on-chip domain-engineered lithium niobate (LN) waveguide. Spontaneous parametric down-conversion and electro-optic interaction are effectively combined through suitable domain design to transform the entangled state into our desired formation. Moreover, this is a flexible approach to entanglement architectures. Other kinds of reconfigurable entanglements are also achievable through this method. LN provides a very promising platform for future quantum circuit integration

  14. Hysteresis-free high-temperature precise bimorph actuators produced by direct bonding of lithium niobate wafers

    Energy Technology Data Exchange (ETDEWEB)

    Shur, V. Ya.; Baturin, I. S.; Mingaliev, E. A.; Zorikhin, D. V.; Udalov, A. R.; Greshnyakov, E. D. [Ferroelectric Laboratory, Institute of Natural Sciences, Ural Federal University, 51 Lenin Ave., 620000 Ekaterinburg (Russian Federation)

    2015-02-02

    The current paper presents a piezoelectric bimorph actuator produced by direct bonding of lithium niobate wafers with the mirrored Y and Z axes. Direct bonding technology allowed to fabricate bidomain plate with precise positioning of ideally flat domain boundary. By optimizing the cutting angle (128° Y-cut), the piezoelectric constant became as large as 27.3 pC/N. Investigation of voltage dependence of bending displacement confirmed that bimorph actuator has excellent linearity and hysteresis-free. Decrease of the applied voltage down to mV range showed the perfect linearity up to the sub-nm deflection amplitude. The frequency and temperature dependences of electromechanical transmission coefficient in wide temperature range (from 300 to 900 K) were investigated.

  15. Highly coherent mid-IR supercontinuum by self-defocusing solitons in lithium niobate waveguides with all-normal dispersion

    DEFF Research Database (Denmark)

    Guo, Hairun; Zhou, Binbin; Zeng, Xianglong

    2014-01-01

    We numerically investigate self-defocusing solitons in a lithium niobate (LN) waveguide designed to have a large refractive index (RI) change. The waveguide evokes strong waveguide dispersion and all-normal dispersion is found in the entire guiding band spanning the near-IR and the beginning of t...... dispersion, the soliton spectral tunneling effect is also investigated, with which few-cycle pico-joule pulses at 2 mm are formed by a near-IR pump. © 2014 Optical Society of America....... where no linear dispersion (i.e. non-solitonic) regimes exist within the guiding band. Soliton compressions at 2 mm and 3 mm are investigated, with nano-joule single cycle pulse formations and highly coherent octave-spanning supercontinuum generations. With an alternative design on the waveguide...

  16. Structure and dehydration of layered perovskite niobate with bilayer hydrates prepared by exfoliation/self-assembly process

    Science.gov (United States)

    Chen, Yufeng; Zhao, Xinhua; Ma, Hui; Ma, Shulan; Huang, Gailing; Makita, Yoji; Bai, Xuedong; Yang, Xiaojing

    2008-07-01

    The crystals of an H-form niobate of HCa 2Nb 3O 10· xH 2O ( x=0.5) being tetragonal symmetry (space group P4/ mbm) with unit cell parameters a=5.4521(6) and c=14.414(2) Å were exfoliated into nanosheets with the triple-layered perovskite structure. The colloid suspension of the nanosheets was put into dialysis membrane tubing and allowed self-assembly in a dilute KCl solution. By this method, a novel layered K-form niobate KCa 2Nb 3O 10· xH 2O ( x=1.3, typically) with bilayer hydrates in the interlayer was produced. The Rieveld refinement and transmission electron microscope (TEM)/selected-area electron diffraction (SAED) observation indicated that the orientations of the a-/ b-axis of each nanosheet as well as the c-axis are uniform, and the self-assembled compound had the same symmetry, tetragonal ( P4/ mbm) with a=5.453(2) and c=16.876(5) Å, as the H-form precursor; the exfoliation/self-assembly process does not markedly affect the two-dimensional lattice of the layer. The large basal spacing resulted from the interlayer K + ions solvated by two layers of water molecules. The interlayer bilayers-water was gradually changed to monolayer when the temperatures higher than 100 °C, and all the water molecules lost when over 600 °C. Accompanying the dehydration, the crystal structure transformed from tetragonal to orthorhombic symmetry. Water molecules may take an important role for the layer layered compound to adjust the unit cell to tetragonal symmetry.

  17. Exposure to nickel, chromium, or cadmium causes distinct changes in the gene expression patterns of a rat liver derived cell line.

    Directory of Open Access Journals (Sweden)

    Matthew G Permenter

    Full Text Available Many heavy metals, including nickel (Ni, cadmium (Cd, and chromium (Cr are toxic industrial chemicals with an exposure risk in both occupational and environmental settings that may cause harmful outcomes. While these substances are known to produce adverse health effects leading to disease or health problems, the detailed mechanisms remain unclear. To elucidate the processes involved in the toxicity of nickel, cadmium, and chromium at the molecular level and to perform a comparative analysis, H4-II-E-C3 rat liver-derived cell lines were treated with soluble salts of each metal using concentrations derived from viability assays, and gene expression patterns were determined with DNA microarrays. We identified both common and unique biological responses to exposure to the three metals. Nickel, cadmium, chromium all induced oxidative stress with both similar and unique genes and pathways responding to this stress. Although all three metals are known to be genotoxic, evidence for DNA damage in our study only exists in response to chromium. Nickel induced a hypoxic response as well as inducing genes involved in chromatin structure, perhaps by replacing iron in key proteins. Cadmium distinctly perturbed genes related to endoplasmic reticulum stress and invoked the unfolded protein response leading to apoptosis. With these studies, we have completed the first gene expression comparative analysis of nickel, cadmium, and chromium in H4-II-E-C3 cells.

  18. Differences in Env and Gag protein expression patterns and epitope availability in feline immunodeficiency virus infected PBMC compared to infected and transfected feline model cell lines.

    Science.gov (United States)

    Roukaerts, Inge D M; Grant, Chris K; Theuns, Sebastiaan; Christiaens, Isaura; Acar, Delphine D; Van Bockstael, Sebastiaan; Desmarets, Lowiese M B; Nauwynck, Hans J

    2017-01-02

    Env and Gag are key components of the FIV virion that are targeted to the plasma membrane for virion assembly. They are both important stimulators and targets of anti-FIV immunity. To investigate and compare the expression pattern and antigenic changes of Gag and Env in various research models, infected PBMC (the natural FIV host cells) and GFox, and transfected CrFK were stained over time with various Env and Gag specific MAbs. In FIV infected GFox and PBMC, Env showed changes in epitope availability for antibody binding during processing and trafficking, which was not seen in transfected CrFK. Interestingly, epitopes exposed on intracellular Env and Env present on the plasma membrane of CrFK and GFox seem to be hidden on plasma membrane expressed Env of FIV infected PBMC. A kinetic follow up of Gag and Env expression showed a polarization of both Gag and Env expression to specific sites at the plasma membrane of PBMC, but not in other cell lines. In conclusion, mature trimeric cell surface expressed Env might be antigenically distinct from intracellular monomeric Env in PBMC and might possibly be unrecognizable by feline humoral immunity. In addition, Env expression is restricted to a small area on the plasma membrane and co-localizes with a large moiety of Gag, which may represent a preferred FIV budding site, or initiation of virological synapses with direct cell-to-cell virus transmission. Copyright © 2016. Published by Elsevier B.V.

  19. Visualization of ferroelectric domain structures in lithium niobate by means of confocal nonlinear microscopy; Visualisierung ferroelektrischer Domaenenstrukturen in Lithiumniobat mittels konfokaler nichtlinearer Mikroskopie

    Energy Technology Data Exchange (ETDEWEB)

    Berth, Gerhard

    2010-07-01

    In the field of integrated optics nonlinear-optical effects play a central role. A typical example for the commercial use of such phenomena is the frequency conversion. A deciding parameter is here the phase matching, which determines the quantity of the constructive interaction range of contributing optical fields. In view of a high efficiency of such processes the dispersion of a crystal must be balanced for the contributing frequencies. In nonlinear components on the base of optical waveguides the principle of the ''quasi-phase matching'' is applied, which uses the microdomain inversion. Phase jumps occuring at the domain boundaries compensate in the mean the different phase velocities. The application range of such periodical structures depends essentially on sharpness, homogeneity, depth extent, and period of the domain structure. The nonlinear confocal laser scanning microscopy makes a mapping of this transferred ferroelectric domain structure possible. Primary aim of this thesis is the characterization and mapping of the transferred ferroelectric domain structure in lithium niobate. A modularly kept confocal microscope makes here a nonlinear analysis in reflection and transmission geometry possible. In both geometries systematic studies as function of important process parameters were performed. It was shown that because of the larger nonlinear coherence length in the transmission modus the SHG ensues above all in forward direction. By depth-resolved studies at Z-cut PPLN structured between the surface region and the volume crystal a flippling of the SHG contrast could be observed. In samples with circular pole structure additionally in the crystal a transition to a hexagonal structure took place. In the Ti:PPLN strip waveguide a strong and specific increasement of the nonlinear signal of the domain walls was discovered. Here also the usual SHG surface contrast between dhe domains and the boundaries is inverted. Also differently processed

  20. Electrochemical lithium insertion in some niobates MNb{sub 2}O{sub 6} (M=Mn, Co, Ni, Cu, Zn and Cd)

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-de la Cruz, A.; Lopez Alcaraz, N.; Fuentes, A.F.; Torres-Martinez, L.M. [Universidad Autonoma de Nuevo Leon, Monterrey (Mexico). Facultad de Ciencias Quimicas

    1999-09-01

    Several oxides with the general formula MNb{sub 2}O{sub 6} (M=Mn, Co, Ni, Cu, Zn and Cd) have been tested as cathodes for lithium batteries. When discharging electrochemical cells using these niobates as active materials down 0.5 V, the maximum observed lithium content (x) in Li{sub x}MNb{sub 2}O{sub 6} was x=0.9, 0.9, 1.15, 1.5, 2.3 and 3.0 for M=Mn, Co, Zn, Cd, Ni and Cu, respectively. In situ X-ray diffraction experiments revealed in all cases a certain loss of crystallinity as the insertion reaction proceeds. Only the copper niobate showed an almost complete amorphization after the initial discharge. The kinetics of lithium insertion in these compounds was studied by electrochemical spectroscopy in a stepping potential mode. (orig.)

  1. Fabrication of supported Ca-doped lanthanum niobate electrolyte layer and NiO containing anode functional layer by electrophoretic deposition

    DEFF Research Database (Denmark)

    Bozza, Francesco; Bonanos, Nikolaos

    2012-01-01

    The technique of electrophoretic deposition (EPD) has been applied for the preparation of a dense calcium-doped lanthanum niobate electrolyte film. La0.995Ca0.005NbO4 (LCN) powder was suspended in a solution of acetylacetone, iodine and water. The effects of suspension composition and deposition...... conditions were analyzed in order to identify a suitable set of EPD process parameters. The powders were deposited on a composite substrate of LCN, NiO, binder and graphite. A dense 8 μm film of lanthanum niobate supported on a porous substrate was obtained after sintering at 1200 °C. The technique was found...... to be effective also for the deposition of a mixture of NiO and LCN powders which, after sintering, would form LCN/NiO anode functional layer. Electrochemical characterization of the supported LCN film was performed by applying a LCN/NiO counter electrode....

  2. Understanding large-scale, long-term larval connectivity patterns: The case of the Northern Line Islands in the Central Pacific Ocean.

    Science.gov (United States)

    Mari, Lorenzo; Bonaventura, Luca; Storto, Andrea; Melià, Paco; Gatto, Marino; Masina, Simona; Casagrandi, Renato

    2017-01-01

    Protecting key hotspots of marine biodiversity is essential to maintain ecosystem services at large spatial scales. Protected areas serve not only as sources of propagules colonizing other habitats, but also as receptors, thus acting as protected nurseries. To quantify the geographical extent and the temporal persistence of ecological benefits resulting from protection, we investigate larval connectivity within a remote archipelago, characterized by a strong spatial gradient of human impact from pristine to heavily exploited: the Northern Line Islands (NLIs), including part of the Pacific Remote Islands Marine National Monument (PRI-MNM). Larvae are described as passive Lagrangian particles transported by oceanic currents obtained from a oceanographic reanalysis. We compare different simulation schemes and compute connectivity measures (larval exchange probabilities and minimum/average larval dispersal distances from target islands). To explore the role of PRI-MNM in protecting marine organisms with pelagic larval stages, we drive millions of individual-based simulations for various Pelagic Larval Durations (PLDs), in all release seasons, and over a two-decades time horizon (1991-2010). We find that connectivity in the NLIs is spatially asymmetric and displays significant intra- and inter-annual variations. The islands belonging to PRI-MNM act more as sinks than sources of larvae, and connectivity is higher during the winter-spring period. In multi-annual analyses, yearly averaged southward connectivity significantly and negatively correlates with climatological anomalies (El Niño). This points out a possible system fragility and susceptibility to global warming. Quantitative assessments of large-scale, long-term marine connectivity patterns help understand region-specific, ecologically relevant interactions between islands. This is fundamental for devising scientifically-based protection strategies, which must be space- and time-varying to cope with the

  3. Detection of boiling by Piety's on-line PSD-pattern recognition algorithm applied to neutron noise signals in the SAPHIR reactor

    International Nuclear Information System (INIS)

    Spiekerman, G.

    1988-09-01

    A partial blockage of the cooling channels of a fuel element in a swimming pool reactor could lead to vapour generation and to burn-out. To detect such anomalies, a pattern recognition algorithm based on power spectra density (PSD) proposed by Piety was further developed and implemented on a PDP 11/23 for on-line applications. This algorithm identifies anomalies by measuring the PSD on the process signal and comparing them with a standard baseline previously formed. Up to 8 decision discriminants help to recognize spectral changes due to anomalies. In our application, to detect boiling as quickly as possible with sufficient sensitivity, Piety's algorithm was modified using overlapped Fast-Fourier-Transform-Processing and the averaging of the PSDs over a large sample of preceding instantaneous PSDs. This processing allows high sensitivity in detecting weak disturbances without reducing response time. The algorithm was tested with simulation-of-boiling experiments where nitrogen in a cooling channel of a mock-up of a fuel element was injected. Void fractions higher than 30 % in the channel can be detected. In the case of boiling, it is believed that this limit is lower because collapsing bubbles could give rise to stronger fluctuations. The algorithm was also tested with a boiling experiment where the reactor coolant flow was actually reduced. The results showed that the discriminant D5 of Piety's algorithm based on neutron noise obtained from the existing neutron chambers of the reactor control system could sensitively recognize boiling. The detection time amounts to 7-30 s depending on the strength of the disturbances. Other events, which arise during a normal reactor run like scrams, removal of isotope elements without scramming or control rod movements and which could lead to false alarms, can be distinguished from boiling. 49 refs., 104 figs., 5 tabs

  4. Understanding large-scale, long-term larval connectivity patterns: The case of the Northern Line Islands in the Central Pacific Ocean.

    Directory of Open Access Journals (Sweden)

    Lorenzo Mari

    Full Text Available Protecting key hotspots of marine biodiversity is essential to maintain ecosystem services at large spatial scales. Protected areas serve not only as sources of propagules colonizing other habitats, but also as receptors, thus acting as protected nurseries. To quantify the geographical extent and the temporal persistence of ecological benefits resulting from protection, we investigate larval connectivity within a remote archipelago, characterized by a strong spatial gradient of human impact from pristine to heavily exploited: the Northern Line Islands (NLIs, including part of the Pacific Remote Islands Marine National Monument (PRI-MNM. Larvae are described as passive Lagrangian particles transported by oceanic currents obtained from a oceanographic reanalysis. We compare different simulation schemes and compute connectivity measures (larval exchange probabilities and minimum/average larval dispersal distances from target islands. To explore the role of PRI-MNM in protecting marine organisms with pelagic larval stages, we drive millions of individual-based simulations for various Pelagic Larval Durations (PLDs, in all release seasons, and over a two-decades time horizon (1991-2010. We find that connectivity in the NLIs is spatially asymmetric and displays significant intra- and inter-annual variations. The islands belonging to PRI-MNM act more as sinks than sources of larvae, and connectivity is higher during the winter-spring period. In multi-annual analyses, yearly averaged southward connectivity significantly and negatively correlates with climatological anomalies (El Niño. This points out a possible system fragility and susceptibility to global warming. Quantitative assessments of large-scale, long-term marine connectivity patterns help understand region-specific, ecologically relevant interactions between islands. This is fundamental for devising scientifically-based protection strategies, which must be space- and time-varying to cope with

  5. Complex Patterns of Protease Inhibitor Resistance among Antiretroviral Treatment-Experienced HIV-2 Patients from Senegal: Implications for Second-Line Therapy

    Science.gov (United States)

    Smith, Robert A.; Ba, Selly; Toure, Macoumba; Traore, Fatou; Sall, Fatima; Pan, Charlotte; Blankenship, Lindsey; Montano, Alexandra; Olson, Julia; Dia Badiane, Ndeye Mery; Mullins, James I.; Kiviat, Nancy B.; Hawes, Stephen E.; Sow, Papa Salif; Gottlieb, Geoffrey S.

    2013-01-01

    Protease inhibitor (PI)-based antiretroviral therapy (ART) can effectively suppress HIV-2 plasma load and increase CD4 counts; however, not all PIs are equally active against HIV-2, and few data exist to support second-line therapy decisions. To identify therapeutic options for HIV-2 patients failing ART, we evaluated the frequency of PI resistance-associated amino acid changes in HIV-2 sequences from a cohort of 43 Senegalese individuals receiving unboosted indinavir (n = 18 subjects)-, lopinavir/ritonavir (n = 4)-, or indinavir and then lopinavir/ritonavir (n = 21)-containing ART. Common protease substitutions included V10I, V47A, I54M, V71I, I82F, I84V, L90M, and L99F, and most patients harbored viruses containing multiple changes. Based on genotypic data, we constructed a panel of 15 site-directed mutants of HIV-2ROD9 containing single- or multiple-treatment-associated amino acid changes in the protease-encoding region of pol. We then quantified the susceptibilities of the mutants to the HIV-2 “active” PIs saquinavir, lopinavir, and darunavir using a single-cycle assay. Relative to wild-type HIV-2, the V47A mutant was resistant to lopinavir (6.3-fold increase in the mean 50% effective concentration [EC50]), the I54M variant was resistant to darunavir and lopinavir (6.2- and 2.7-fold increases, respectively), and the L90M mutant was resistant to saquinavir (3.6-fold increase). In addition, the triple mutant that included I54M plus I84V plus L90M was resistant to all three PIs (31-, 10-, and 3.8-fold increases in the mean EC50 for darunavir, saquinavir, and lopinavir, respectively). Taken together, our data demonstrate that PI-treated HIV-2 patients frequently harbor viruses that exhibit complex patterns of PI cross-resistance. These findings suggest that sequential PI-based regimens for HIV-2 treatment may be ineffective. PMID:23571535

  6. The triple line pattern on carotid intima media thickness imaging and its relationship to cardiovascular risk factors in patients on lipid lowering therapy

    Directory of Open Access Journals (Sweden)

    Singh TA

    2014-06-01

    Full Text Available Tania A Singh,1 Todd C Villines,2 Allen J Taylor31Division of Cardiology, Medstar Georgetown University Hospital, 2Walter Reed National Military Medical Center, Bethesda, MD, 3Georgetown University School of Medicine, Washington, DC, USA Background: Carotid intima media thickness (CIMT infrequently identifies a triple line pattern (TLP in the visualization of the internal elastic lamina. We examined the prevalence and predictors of the TLP among a consecutive series of subjects enrolled in a CIMT clinical trial, and also the effects of lipid lowering therapy.Methods: Baseline CIMT studies of subjects with known heart disease, or high risk for heart disease, were evaluated from a single site of the Arterial Biology for the Investigation of the Treatment Effects of Reducing Cholesterol 6-HDL and LDL Treatment Strategies in Atherosclerosis trial (N=120. One sonographer obtained four views of the right and left far wall common CIMT, using a 13 MHz ultrasound probe. Images were blindly reviewed for the presence of the TLP. The TLP was defined as absent (0, possible (1, or definite (2. A composite score from all four views was calculated. A patient was defined as having the TLP if the composite score was ≥4. Univariate predictors of the TLP were explored. Follow-up ultrasounds at 14 months were also reviewed for presence of the TLP.Results: The prevalence of the TLP at baseline was 22.5%. Among cardiovascular risk variables, systolic blood pressure was significantly higher in subjects displaying the TLP (141.3±15.6 mmHg versus 133.1±18.4 mmHg; P=0.036. There were no differences among those with, and without, the TLP, with respect to other cardiovascular risk variables (age, sex, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, C-reactive protein, glucose, weight, waist girth, tobacco use, medications, quantitative CIMT, or image quality. During ongoing lipid lowering therapy, the prevalence of the TLP increased to 54

  7. Optical properties of Er{sup 3+}-doped strontium barium niobate nanocrystals obtained by thermal treatment in glass

    Energy Technology Data Exchange (ETDEWEB)

    Haro-Gonzalez, P. [Dep. of Fisica Fundamental Experimental, Electronica y Sistemas, Universidad de La Laguna Avda Astrofisico Franscisco Sanchez, 38206 La Laguna, S/C de Tenerife (Spain)], E-mail: patharo@ull.es; Lahoz, F. [Dep. of Fisica Fundamental Experimental, Electronica y Sistemas, Universidad de La Laguna Avda Astrofisico Franscisco Sanchez, 38206 La Laguna, S/C de Tenerife (Spain); Gonzalez-Platas, J. [Dep. of Fisica Fundamental II, Universidad de La Laguna, 38206 La Laguna, S/C de Tenerife (Spain); Caceres, J.M. [Dep. of Edafologia y Geologia, Universidad de La Laguna, 38206 La Laguna, S/C de Tenerife (Spain); Gonzalez-Perez, S. [Dep. of Fisica Fundamental Experimental, Electronica y Sistemas, Universidad de La Laguna Avda Astrofisico Franscisco Sanchez, 38206 La Laguna, S/C de Tenerife (Spain); Marrero-Lopez, D. [Dep. of Quimica Inorganica, Universidad de La Laguna, 38206 La Laguna, S/C de Tenerife (Spain); Capuj, N. [Dep. of Fisica Basica, Universidad de La Laguna, 38206 La Laguna, S/C de Tenerife (Spain); Martin, I.R. [Dep. of Fisica Fundamental Experimental, Electronica y Sistemas, Universidad de La Laguna Avda Astrofisico Franscisco Sanchez, 38206 La Laguna, S/C de Tenerife (Spain)

    2008-05-15

    Measurements of the optical properties of Er{sup 3+} ions in strontium barium niobate glass and glass ceramics have been carried out. The glasses have been fabricated using a melt-quenching method, and the glass ceramic samples have been obtained from the glass precursor by a thermal treatment. The ceramic samples formed by a glassy phase, and a crystalline phase contains nanocrystals of Sr{sub 1-x}Ba{sub x}Nb{sub 2}O{sub 6} (SBN) doped with Er{sup 3+} ions with a mean size of {approx}50 nm, as confirmed with XRD. Green up-conversion emission has been obtained under excitation at 800 nm, and the temporal evolution of this emission has been reported with the purpose of determining the involved up-conversion mechanism. These optical measures have confirmed that the Er{sup 3+} ions have been incorporated into the SBN matrix, after a thermal treatment, which produced an increment of the up-conversion efficiency.

  8. Enhancement of Dielectric Breakdown Strength and Energy Conversion Efficiency of Niobate Glass-Ceramics by Sc2O3 Doping

    Science.gov (United States)

    Xiao, Shi; Xiu, Shaomei; Yang, Ke; Shen, Bo; Zhai, Jiwei

    2018-01-01

    Niobate glass-ceramics K2O-SrO-Nb2O5-B2O3-Al2O3-SiO2 (KSN-BAS) doped with different amounts of Sc2O3 have been prepared through a melt quenching/controlled crystallization method, and the influence of the Sc2O3 content on their phase composition, microstructure, dielectric performance, and charge-discharge properties investigated. X-ray powder diffraction results showed that the peak positions of the KSr2Nb5O15 phase shifted to higher angle and the glass-ceramic microstructures were significantly improved by Sc2O3 addition. Based on these results, 0.5 mol.% Sc2O3 doping was found to achieve remarkable enhancement in energy storage density, which reached 9.63 ± 0.39 J/cm3 at dielectric breakdown strength of 1450.38 ± 29.01 kV/cm with high conversion efficiency of ˜ 92.1%. For pulsed power applications, discharge speed of 17 ns and power density of 0.48 MW/cm3 were obtained in the glass-ceramic with 0.5 mol.% Sc2O3. These results could provide a new design strategy for high-performance dielectric capacitors.

  9. Preparation of cube micrometer potassium niobate (KNbO3) by hydrothermal method and sonocatalytic degradation of organic dye.

    Science.gov (United States)

    Zhang, Hongbo; Wei, Chunsheng; Huang, Yingying; Wang, Jun

    2016-05-01

    Cube micrometer potassium niobate (KNbO3) powder, as a high effective sonocatalyst, was prepared using hydrothermal method, and then, was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of prepared KNbO3 powder, the sonocatalytic degradation of some organic dyes was studied. In addition, some influencing factors such as heat-treatment temperature and heat-treatment time on the sonocatalytic activity of prepared KNbO3 powder and catalyst added amount and ultrasonic irradiation time on the sonocatalytic degradation efficiency were examined by using UV-visible spectrophotometer and Total Organic Carbon (TOC) determination. The experimental results showed that the best sonocatalytic degradation ratio (69.23%) of organic dyes could be obtained when the conditions of 5.00 mg/L initial concentration, 1.00 g/L prepared KNbO3 powder (heat-treated at 400 °C for 60 min) added amount, 5.00 h ultrasonic irradiation (40 kHz frequency and 300 W output power), 100mL total volume and 25-28 °C temperature were adopted. Therefore, the micrometer KNbO3 powder could be considered as an effective sonocatalyst for treating non- or low-transparent organic wastewaters. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Tip-induced domain growth on the non-polar cuts of lithium niobate single-crystals

    Science.gov (United States)

    Alikin, D. O.; Ievlev, A. V.; Turygin, A. P.; Lobov, A. I.; Kalinin, S. V.; Shur, V. Ya.

    2015-05-01

    Currently, ferroelectric materials with designed domain structures are considered as a perspective material for new generation of photonic, data storage, and data processing devices. Application of external electric field is the most convenient way of the domain structure formation. Lots of papers are devoted to the investigation of domain kinetics on polar surface of crystals while the forward growth remains one of the most mysterious stages due to lack of experimental methods allowing to study it. Here, we performed tip-induced polarization reversal on X- and Y-non-polar cuts in single-crystal of congruent lithium niobate which allows us to study the forward growth with high spatial resolution. The revealed difference in the shape and length of domains induced on X- and Y-cuts is beyond previously developed theoretical approaches used for the theoretical consideration of the domains growth at non-polar ferroelectric surfaces. To explain experimental results, we used kinetic approach with anisotropy of screening efficiency along different crystallographic directions.

  11. Nanoscale observation of the distribution of the polarization orientation of ferroelectric domains in lithium niobate thin films

    International Nuclear Information System (INIS)

    Gautier, B.; Bornand, V.

    2006-01-01

    In this paper, an Atomic Force Microscope (AFM) in the so-called piezoresponse mode is used to image the ferroelectric domains in radio frequency sputtered lithium niobate (LiNbO 3 ) thin films. It is shown that ferroelectric domains are clearly detectable and most of the time confined in the grains. The vertical and the lateral motion of the vibration of the tip in response to the applied alternating voltage is recorded in order to reconstruct a cartography of the orientation of the ferroelectric domains, allowing us to observe the distribution of the orientation of the polarization in the polycrystalline film and providing additional information about the direction of the polarization, although it is not a fully 3D cartography. From Piezoresponse Force Microscopy images, it is clear that the dispersion of the orientation of the polarization vector in the studied LiNbO 3 sample is very high. It is shown that the AFM quasi-3D mapping of the distribution of orientation in the material provides a valuable information and may help understanding the fundamental phenomena which govern the growth of the material

  12. Linear Thermal Expansion Measurements of Lead Magnesium Niobate (PMN) Electroceramic Material for the Terrestrial Planet Finder Coronagraph

    Science.gov (United States)

    Karlmann, Paul B.; Halverson, Peter G.; Peters, Robert D.; Levine, Marie B.; VanBuren, David; Dudik, Matthew J.

    2005-01-01

    Linear thermal expansion measurements of nine samples of Lead Magnesium Niobate (PMN) electroceramic material were recently performed in support of NASA's Terrestrial Planet Finder Coronagraph (TPF-C) mission. The TPF-C mission is a visible light coronagraph designed to look at roughly 50 stars pre- selected as good candidates for possessing earth-like planets. Upon detection of an earth-like planet, TPF-C will analyze the visible-light signature of the planet's atmosphere for specific spectroscopic indicators that life may exist there. With this focus, the project's primary interest in PMN material is for use as a solid-state actuator for deformable mirrors or compensating optics. The nine test samples were machined from three distinct boules of PMN ceramic manufactured by Xinetics Inc. Thermal expansion measurements were performed in 2005 at NASA Jet Propulsion Laboratory (JPL) in their Cryogenic Dilatometer Facility. All measurements were performed in vacuum with sample temperature actively controlled over the range of 270K to 3 10K. Expansion and contraction of the test samples with temperature was measured using a JPL developed interferometric system capable of sub-nanometer accuracy. Presented in this paper is a discussion of the sample configuration, test facilities, test method, data analysis, test results, and future plans.

  13. New functionalities of potassium tantalate niobate deflectors enabled by the coexistence of pre-injected space charge and composition gradient

    Science.gov (United States)

    Zhu, Wenbin; Chao, Ju-Hung; Chen, Chang-Jiang; Campbell, Adrian L.; Henry, Michael G.; Yin, Stuart Shizhuo; Hoffman, Robert C.

    2017-10-01

    In most beam steering applications such as 3D printing and in vivo imaging, one of the essential challenges has been high-resolution high-speed multi-dimensional optical beam scanning. Although the pre-injected space charge controlled potassium tantalate niobate (KTN) deflectors can achieve speeds in the nanosecond regime, they deflect in only one dimension. In order to develop a high-resolution high-speed multi-dimensional KTN deflector, we studied the deflection behavior of KTN deflectors in the case of coexisting pre-injected space charge and composition gradient. We find that such coexistence can enable new functionalities of KTN crystal based electro-optic deflectors. When the direction of the composition gradient is parallel to the direction of the external electric field, the zero-deflection position can be shifted, which can reduce the internal electric field induced beam distortion, and thus enhance the resolution. When the direction of the composition gradient is perpendicular to the direction of the external electric field, two-dimensional beam scanning can be achieved by harnessing only one single piece of KTN crystal, which can result in a compact, high-speed two-dimensional deflector. Both theoretical analyses and experiments are conducted, which are consistent with each other. These new functionalities can expedite the usage of KTN deflection in many applications such as high-speed 3D printing, high-speed, high-resolution imaging, and free space broadband optical communication.

  14. Modeling of Lithium Niobate (LiNbO3) and Aluminum Nitride (AlN) Nanowires Using Comsol Multiphysics Software: The Case of Pressure Sensor

    Science.gov (United States)

    Ahmad, A. A.; Alsaad, A.; Al-Bataineh, Q. M.; Al-Naafa, M. A.

    2018-02-01

    In this study, Lithium niobate (LiNbO3) and Aluminum nitride (AlN) nanostructures were designed and investigated using the COMSOL Multiphysics software for pressure sensing applications. The Finite Element Method (FEM) was used for solving the differential equations with various parameters such as size, length, force, etc. The variation of the total maximum displacement as a function of applied force for various NWs lengths and the variation of the voltage as a function of applied force were plotted and discussed. AlN nanowires exhibit a better piezoelectric response than LiNbO3 nanowires do.

  15. Šolc-Type Wavelength Filters Based on TE↔TM Mode Conversion Utilizing Periodically Poled Ti-Diffused Lithium Niobate Channel Waveguides

    Directory of Open Access Journals (Sweden)

    Hongsik Jung

    2010-01-01

    Full Text Available We have demonstrated the Šolc-type wavelength filters in a 52 mm long periodically poled Ti-diffused lithium niobate channel waveguide which has a domain period of 16.6 μm. At room temperature, the center wavelength and the full-width at half maximum of the filter were about 1272.49 nm and 0.23 nm, respectively. The nearest side-lobe is about 7 dB. New structure of optical add/drop multiplexer (OADM utilizing Šolc-type TE↔TM mode converters was proposed for the first time.

  16. Determination of temperature dependency of material parameters for lead-free alkali niobate piezoceramics by the inverse method

    Directory of Open Access Journals (Sweden)

    K. Ogo

    2016-06-01

    Full Text Available Sodium potassium niobate (NKN piezoceramics have been paid much attention as lead-free piezoelectric materials in high temperature devices because of their high Curie temperature. The temperature dependency of their material parameters, however, has not been determined in detail up to now. For this purpose, we exploit the so-called Inverse Method denoting a simulation-based characterization approach. Compared with other characterization methods, the Inverse Method requires only one sample shape of the piezoceramic material and has further decisive advantages. The identification of material parameters showed that NKN is mechanically softer in shear direction compared with lead zirconate titanate (PZT at room temperature. The temperature dependency of the material parameters of NKN was evaluated in the temperature range from 30 °C to 150 °C. As a result, we figured out that dielectric constants and piezoelectric constants show a monotonous and isotropic increment with increasing temperature. On the other hand, elastic stiffness constant c 44 E of NKN significantly decreased in contrast to other elastic stiffness constants. It could be revealed that the decrement of c 44 E is associated with an orthorhombic-tetragonal phase transition. Furthermore, ratio of elastic compliance constants s 44 E / s 33 E exhibited similar temperature dependent behavior to the ratio of piezoelectric constants d15/d33. It is suspected that mechanical softness in shear direction is one origin of the large piezoelectric shear mode of NKN. Our results show that NKN are suitable for high temperature devices, and that the Inverse Method should be a helpful approach to characterize material parameters under their practical operating conditions for NKN.

  17. Dielectric properties and microstructural characterization of cubic pyrochlored bismuth magnesium niobates

    KAUST Repository

    Zhang, Yuan

    2013-08-06

    Cubic bismuth pyrochlores in the Bi2O3 Bi 2O3-MgO-Nb2O5 Nb2O 5 system have been investigated as promising dielectric materials due to their high dielectric constant and low dielectric loss. Here, we report on the dielectric properties and microstructures of cubic pyrochlored Bi 1.5 MgNb 1.5 O 7 Bi1.5MgNb1.5O7 (BMN) ceramic samples synthesized via solid-state reactions. The dielectric constant (measured at 1 MHz) was measured to be ∼ 120 ∼120 at room temperature, and the dielectric loss was as low as 0.001. X-ray diffraction patterns demonstrated that the BMN samples had a cubic pyrochlored structure, which was also confirmed by selected area electron diffraction (SAED) patterns. Raman spectrum revealed more than six vibrational models predicted for the ideal pyrochlore structure, indicating additional atomic displacements of the A and O′ O\\' sites from the ideal atomic positions in the BMN samples. Structural modulations of the pyrochlore structure along the [110] and [121] directions were observed in SAED patterns and high-resolution transmission electron microscopy (HR-TEM) images. In addition, HR-TEM images also revealed that the grain boundaries (GBs) in the BMN samples were much clean, and no segregation or impure phase was observed forming at GBs. The high dielectric constants in the BMN samples were ascribed to the long-range ordered pyrochlore structures since the electric dipoles formed at the superstructural direction could be enhanced. The low dielectric loss was attributed to the existence of noncontaminated GBs in the BMN ceramics. © 2013 Springer-Verlag Berlin Heidelberg.

  18. Simulation and experimental determination of the macro-scale layer thickness distribution of electrodeposited Cu-line patterns on a wafer substrate

    DEFF Research Database (Denmark)

    Pantleon, Karen; Bossche, Bart van den; Purcar, Marius

    2005-01-01

    on the patterned wafer, and layer thickness measurements by means of X-ray fluorescence (XRF) and atomic force microscopy (AFM). The simulations are based on a potential model approach taking into account electrolyte ohmic drop and electrode polarization effects, combined to a boundary element method (BEM...

  19. A comparative study of protein patterns of human estrogen receptor positive (MCF-7) and negative (MDA-MB-231) breast cancer cell lines

    Czech Academy of Sciences Publication Activity Database

    Flodrová, Dana; Toporová, L.; Macejová, D.; Laštovičková, Markéta; Brtko, J.; Bobálová, Janette

    2016-01-01

    Roč. 35, č. 3 (2016), s. 387-392 ISSN 0231-5882 Grant - others:Akademie věd - GA AV ČR(CZ) SAV-15-01 Program:Bilaterální spolupráce Institutional support: RVO:68081715 Keywords : cell line * breast cancer * protein * mass spectrometry Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 1.170, year: 2016

  20. Differential patterns of human cytomegalovirus gene expression in various T-cell lines carrying human T-cell leukemia-lymphoma virus type I: role of Tax-activated cellular transcription factors.

    Science.gov (United States)

    Beck, Zoltán; Bácsi, Attila; Liu, Xiangdong; Ebbesen, Peter; Andirkó, István; Csoma, Eszter; Kónya, József; Nagy, Etelka; Tóth, Ferenc D

    2003-09-01

    Replication of human cytomegalovirus (HCMV) was investigated in various T-cell lines expressing the tax gene product of human T-cell leukemia-lymphoma virus type I (HTLV-I). Differential patterns of HCMV replication were found in HTLV-I-carrying cell lines. HCMV gene expression was restricted to the immediate-early genes in MT-2 and MT-4 cells, whereas full replication cycle of the virus was observed in C8166-45 cells. Productive HCMV infection induced a cytopathic effect resulting in the lysis of infected cells. The results of electrophoretic mobility shift assay (EMSA) showed high levels of NF-kappaB-, CREB/ATF-1-, and SRF-specific DNA binding activity in all Tax-positive cell lines. In contrast, SP1 activity could be detected only in C8166-45 cells. Using an inducible system (Jurkat cell line JPX-9), a dramatic increase in NF-kappaB, CREB/ATF-1, SRF, and SP1 binding activity, as well as productive HCMV infection, were observed upon Tax expression. Overexpression of SP1 in MT-2 and MT-4 cells converted HCMV infection from an abortive to a productive one. These data suggest that the stimulatory effect of Tax protein on HCMV in T cells is accomplished through at least five host-related transcription factor pathways. The results of this study provide possible mechanisms whereby HCMV infections might imply suppression of adult T-cell leukemia. Copyright 2003 Wiley-Liss, Inc.

  1. Irradiation-induced modification of the material parameters in magnesium-doped lithium niobate; Bestrahlungsinduzierte Modifikation der Materialparameter in Magnesiumdotiertem Lithiumniobat

    Energy Technology Data Exchange (ETDEWEB)

    Jentjens, Lena

    2010-07-01

    In the framework of this thesis the material properties of lithium niobate are directedly influenced by the irradiation with {sup 3}He ions with an energy of 40 MeV. In the first part the irradiation-induced material changes are intensively studied. Long-time stable changes of the refractive index are measured in the range of up to 6.10{sup -3}, which depend on the radiation dose and exhibit until now no saturation behaviour. Accompanied is this change by an also dose-dependent deformation as well as a brownish change of color of the crystals. Furthermore a by several orders of magnitude increased electrical dark- and photoconductivity, which depends on the ion dose and exhibits until now also no saturation behaviour. An effect independent on the ion dose is the reduction of the coercive field strength by about 10%. Furthermore it was stated the quantity of the effects not only depends on the absolute dose, but also on the irradiation direction in view of the crystallographic c-axis. The second part of this thesis deals with the generation of microscopic structures in lithium niobate. By an ion microbeam respectively a shiftable slit aperture the fabrication of refractive-index gratings is pursued. Grating with periodicity lengths in the range of 12-160 {mu}m could until now be detected and promise in comparison with photorefractive gratings the advance of larger stability.

  2. Substitution mechanisms and location of Co2+ ions in congruent and stoichiometric lithium niobate crystals derived from electron paramagnetic resonance data

    Science.gov (United States)

    Grachev, V. G.; Hansen, K.; Meyer, M.; Kokanyan, E. P.; Malovichko, G. I.

    2017-03-01

    Electron paramagnetic resonance (EPR) spectra and their angular dependencies were measured for Co2+ trace impurities in stoichiometric samples of lithium niobate doped with rhodium. It was found that Co2+ substitutes for Li+ in the dominant axial center (CoLi) and that the principal substitution mechanism in stoichiometric lithium niobate is 4Co2+ ↔ 3Li+  +  Nb5+. The four Co2+ ions can occupy the nearest possible cation sites by occupying a Nb site and its three nearest-neighbor Li sites, creating a trigonal pyramid with C3 symmetry, as well as non-neighboring sites (e.g. a CoNb-CoLi pair at the nearest sites on the C3 axis with two nearby isolated single Co2+ ions substituted for Li+). In congruent crystals and samples with Li content enriched by vapor transport equilibrium treatment the excess charge of the Co2+ centers is compensated by lithium vacancies located rather far from the Co2+ ions for the dominant axial center or in the nearest neighborhood for low-symmetry satellite centers (the Co2+ ↔ 2Li+ substitution mechanism). The use of exact numerical diagonalization of the spin-Hamiltonian matrices explains all the details of the EPR spectra and gives a value for hyperfine interaction A || that is several times smaller than that obtained using perturbation formulae. The refined values of A and g-tensor components can be used as reliable cornerstones for ab initio and cluster calculations.

  3. Operating experiences with an on-line, computer based nuclear plant surveillance and anomaly detection system based on pattern recognition and artificial intelligence

    International Nuclear Information System (INIS)

    Kemeny, L.G.

    1988-01-01

    The control room of a nuclear power plant can represent a hostile work environment for all but a highly trained operating team. Whilst disciplined training and long professional experience will guarantee assurance of safety and reliability in nuclear plant operation, any surveillance system which has the ability to minimise human error and provide additional safeguards is a desirable asset. This paper proposes a scheme whereby some key parameters of a nuclear power plant, precisely known through detailed calculation and accurate measurement are stored as a data base in an on-line computer. Through the systematic statistical analysis of key stochastic variates a comparison is made by the on-line system with the data base at regular intervals. These time intervals may be as short as seconds during periods of reactor transients such as at start-up or shut down. Alternatively, during steady state operation, the parameters are calculated and displayed at intervals of an hour or greater. An anomaly, or an indication of unusual operational behaviour is indicated both numerically and graphically by the computer if it detects a variance greater than a few percent from the mean value of the reference data base. (author)

  4. A molecular analysis of the patterns of genetic diversity in local chickens from western Algeria in comparison with commercial lines and wild jungle fowls.

    Science.gov (United States)

    Mahammi, F Z; Gaouar, S B S; Laloë, D; Faugeras, R; Tabet-Aoul, N; Rognon, X; Tixier-Boichard, M; Saidi-Mehtar, N

    2016-02-01

    The objectives of this study were to characterize the genetic variability of village chickens from three agro-ecological regions of western Algeria: coastal (CT), inland plains (IP) and highlands (HL), to reveal any underlying population structure, and to evaluate potential genetic introgression from commercial lines into local populations. A set of 233 chickens was genotyped with a panel of 23 microsatellite markers. Geographical coordinates were individually recorded. Eight reference populations were included in the study to investigate potential gene flow: four highly selected commercial pure lines and four lines of French slow-growing chickens. Two populations of wild red jungle fowls were also genotyped to compare the range of diversity between domestic and wild fowls. A genetic diversity analysis was conducted both within and between populations. Multivariate redundancy analyses were performed to assess the relative influence of geographical location among Algerian ecotypes. The results showed a high genetic variability within the Algerian population, with 184 alleles and a mean number of 8.09 alleles per locus. The values of heterozygosity (He and Ho) ranged from 0.55 to 0.62 in Algerian ecotypes and were smaller than values found in Jungle fowl populations and higher than values found in commercial populations. Although the structuring analysis of genotypes did not reveal clear subpopulations within Algerian ecotypes, the supervised approach using geographical data showed a significant (p < 0.01) differentiation between the three ecotypes which was mainly due to altitude. Thus, the genetic diversity of Algerian ecotypes may be under the influence of two factors with contradictory effects: the geographical location and climatic conditions may induce some differentiation, whereas the high level of exchanges and gene flow may suppress it. Evidence of gene flow between commercial and Algerian local populations was observed, which may be due to unrecorded

  5. Effect of La and Mn on the properties of alkaline niobate-based piezoelectric ceramics

    Directory of Open Access Journals (Sweden)

    Henry E. Mgbemere

    2016-03-01

    Full Text Available Lead-free ferroelectric (K0.44Na0.52Li0.04(Nb0.86Ta0.1Sb0.04O3 ceramics co-doped with different amounts of both La and Mn have been produced using solid-state synthesis method. The relative density values of the unmodified sample are between 92 and 96% and decreases to ∼91% for the sample with 1 mol% of the co-doping. Bi-modal grain distribution is observed in the samples while the average grain size decreases with co-doping due to grain growth inhibition by pinning of the grain boundary movement. The diffraction patterns show a transformation from an orthorhombic phase to a pseudo-tetragonal phase with co-dopants addition. The Curie temperature and the tetragonal-orthorhombic transition temperatures are lowered from ∼9000 at 330 °C without modification to ∼4000 at temperatures below 250 °C with co-dopant addition. The dielectric loss values of the samples also decrease from ∼0.4 to 0.05 for temperatures up to 250 °C with co-doping. The remnant polarisation Pr of the samples decreases from ∼8.55 kV/cm to ∼6.57 kV/cm with co-dopant addition. The piezoelectric charge coefficient (d33, including the normalised strain values, also decrease from ∼400 pm/V and 220 pC/N to 157 pm/V and 159 pC/N, respectively with co-dopants up to 1 mol%.

  6. Ferroelectric and octahedral tilt twin disorder and the lead-free piezoelectric, sodium potassium niobate system

    International Nuclear Information System (INIS)

    Schiemer, Jason; Withers, Ray L.; Liu, Yun; Yi, Zhiguo

    2012-01-01

    Using electron diffraction, trends in the local structural behaviour of the K x Na 1−x NbO 3 (KNN x) ‘solid solution’ system are investigated and interpreted using an order/disorder based theoretical framework. At room temperature, electron diffraction shows a single plane of transverse polarised, diffuse intensity perpendicular to [0 1 0] p ⁎ (p for parent sub-structure) across the entire phase diagram, indicative of ferroelectric disorder along the [0 1 0] p direction co-existing with long range ferroelectric order along the orthogonal [1 0 0] p and [0 0 1] p directions. An additional characteristic pattern of diffuse scattering is also observed, involving rods of diffuse intensity running along the [1 0 0] p * and [0 0 1] p * directions of the perovskite sub-structure and indicative of octahedral tilt disorder about the [1 0 0] p and [0 0 1] p axes co-existing with long range ordered octahedral tilting around the [0 1 0] p direction. A possible crystal chemical explanation for the existence of this latter octahedral tilt disorder is explored through bond valence sum calculations. The possible influence of both types of disorder on the previously refined, room temperature space group/s and average crystal structure/s is examined. - Graphical abstract: [−3,0.−1]p zone axis EDP of K 0.46 Na 0.54 NbO 3 indexed according to both the relevant Pcm21 space groups (no subscripts) and the parent perovskite subcell (denoted by a subscript p). Highlights: ► Characterises ferroelectric and octahedral tilt disorder in the KNN solid solution. ► Discusses the possible driving forces for this disorder. ► Discusses the implications of this disorder for physical properties. ► Discusses the effects of this disorder on powder diffraction data.

  7. Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

    International Nuclear Information System (INIS)

    Patel, N.; Branch, D. W.; Cular, S.; Schamiloglu, E.

    2015-01-01

    A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO 3 ) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz–100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10–273 ps for DC voltages and 189–813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250–2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115–1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment

  8. Analysis of Dietary Pattern Impact on Weight Status for Personalised Nutrition through On-Line Advice: The Food4Me Spanish Cohort.

    Science.gov (United States)

    San-Cristobal, Rodrigo; Navas-Carretero, Santiago; Celis-Morales, Carlos; Brennan, Lorraine; Walsh, Marianne; Lovegrove, Julie A; Daniel, Hannelore; Saris, Wim H M; Traczyk, Iwonna; Manios, Yannis; Gibney, Eileen R; Gibney, Michael J; Mathers, John C; Martinez, J Alfredo

    2015-11-17

    Obesity prevalence is increasing. The management of this condition requires a detailed analysis of the global risk factors in order to develop personalised advice. This study is aimed to identify current dietary patterns and habits in Spanish population interested in personalised nutrition and investigate associations with weight status. Self-reported dietary and anthropometrical data from the Spanish participants in the Food4Me study, were used in a multidimensional exploratory analysis to define specific dietary profiles. Two opposing factors were obtained according to food groups' intake: Factor 1 characterised by a more frequent consumption of traditionally considered unhealthy foods; and Factor 2, where the consumption of "Mediterranean diet" foods was prevalent. Factor 1 showed a direct relationship with BMI (β = 0.226; r² = 0.259; p dietary patterns, which were characterized by high-density foods consumption, showed positive associations with overweight prevalence. Further analysis showed that prevention of overweight must focus on limiting the intake of known deleterious foods rather than exclusively enhance healthy products.

  9. Analysis of Dietary Pattern Impact on Weight Status for Personalised Nutrition through On-Line Advice: The Food4Me Spanish Cohort

    Directory of Open Access Journals (Sweden)

    Rodrigo San-Cristobal

    2015-11-01

    Full Text Available Obesity prevalence is increasing. The management of this condition requires a detailed analysis of the global risk factors in order to develop personalised advice. This study is aimed to identify current dietary patterns and habits in Spanish population interested in personalised nutrition and investigate associations with weight status. Self-reported dietary and anthropometrical data from the Spanish participants in the Food4Me study, were used in a multidimensional exploratory analysis to define specific dietary profiles. Two opposing factors were obtained according to food groups’ intake: Factor 1 characterised by a more frequent consumption of traditionally considered unhealthy foods; and Factor 2, where the consumption of “Mediterranean diet” foods was prevalent. Factor 1 showed a direct relationship with BMI (β = 0.226; r2 = 0.259; p < 0.001, while the association with Factor 2 was inverse (β = −0.037; r2 = 0.230; p = 0.348. A total of four categories were defined (Prudent, Healthy, Western, and Compensatory through classification of the sample in higher or lower adherence to each factor and combining the possibilities. Western and Compensatory dietary patterns, which were characterized by high-density foods consumption, showed positive associations with overweight prevalence. Further analysis showed that prevention of overweight must focus on limiting the intake of known deleterious foods rather than exclusively enhance healthy products.

  10. Direct self-assembling and patterning of semiconductor quantum dots on transferable elastomer layer

    Energy Technology Data Exchange (ETDEWEB)

    Coppola, Sara [Institute of Applied Sciences and Intelligent System- CNR, Via Campi Flegrei 34, Pozzuoli, 80078 (Italy); Vespini, Veronica, E-mail: v.vespini@isasi.cnr.it [Institute of Applied Sciences and Intelligent System- CNR, Via Campi Flegrei 34, Pozzuoli, 80078 (Italy); Olivieri, Federico [Institute of Applied Sciences and Intelligent System- CNR, Via Campi Flegrei 34, Pozzuoli, 80078 (Italy); University of Naples Federico II, Department of Chemical Materials and Production Engineering, Piazzale Tecchio 80, Naples 80125 (Italy); Nasti, Giuseppe; Todino, Michele; Mandracchia, Biagio; Pagliarulo, Vito; Ferraro, Pietro [Institute of Applied Sciences and Intelligent System- CNR, Via Campi Flegrei 34, Pozzuoli, 80078 (Italy)

    2017-03-31

    Highlights: • A quantum dots self-patterning on micrometrical polymeric array is proposed. • The effect of a quantum dots mix on the array is evaluated. • A PDMS membrane is exploited to transfer the pattern on it. - Abstract: Functionalization of thin and stretchable polymer layers by nano- and micro-patterning of nanoparticles is a very promising field of research that can lead to many different applications in biology and nanotechnology. In this work, we present a new procedure to self-assemble semiconductor quantum dots (QDs) nanoparticles by a simple fabrication process on a freestanding flexible PolyDiMethylSiloxane (PDMS) membrane. We used a Periodically Poled Lithium Niobate (PPLN) crystal to imprint a micrometrical pattern on the PDMS membrane that drives the QDs self-structuring on its surface. This process allows patterning QDs with different wavelength emissions in a single step in order to tune the overall emission spectrum of the composite, tuning the QDs mixing ratio.

  11. Fabrication of Y128- and Y36-cut lithium niobate single-crystalline thin films by crystal-ion-slicing technique

    Science.gov (United States)

    Shuai, Yao; Gong, Chaoguan; Bai, Xiaoyuan; Wu, Chuangui; Luo, Wenbo; Böttger, Roman; Zhou, Shengqiang; Tian, Benlang; Zhang, Wanli

    2018-04-01

    Y128- and Y36-cut single-crystalline lithium niobate (LN) thin films are fabricated by the crystal-ion-slicing (CIS) technique onto LN substrates. The conditions for the successful exfoliation of submicron-thick LN thin films are independent of the wafer orientation used in the present work. Wafer bonding using benzocyclobutene (BCB) is adopted to transfer LN thin films onto substrates, instead of the generally used hydrophilic bonding, which does not need a strict surface polishing process before the bonding. A noncontact polishing method involving low-energy Ar+ irradiation is adopted to treat the sliced LN thin films. The atomic force microscopy result shows that the surface roughness of the LN thin film is reduced from 10.6 to 6.4 nm.

  12. Numerical analysis of continuous charge of lithium niobate in a double-crucible Czochralski system using the accelerated crucible rotation technique

    Science.gov (United States)

    Kitashima, Tomonori; Liu, Lijun; Kitamura, Kenji; Kakimoto, Koichi

    2004-05-01

    The transport mechanism of supplied raw material in a double-crucible Czochralski system using the accelerated crucible rotation technique (ACRT) was investigated by three-dimensional and time-dependent numerical simulation. The calculation clarified that use of the ACRT resulted in enhancement of the mixing effect of the supplied raw material. It is, therefore, possible to maintain the composition of the melt in an inner crucible during crystal growth by using the ACRT. The effect of the continuous charge of the raw material on melt temperature was also investigated. Our results showed that the effect of feeding lithium niobate granules on melt temperature was small, since the feeding rate of the granules is small. Therefore, solidification of the melt surface due to the heat of fusion in this system is not likely.

  13. Nonlinear excitations and charge transport in lithium niobate crystals investigated using femtosecond-light gratings; Nichtlineare Anregungen und Ladungstransport in Lithiumniobatkristallen untersucht mit Femtosekunden-Lichtgittern

    Energy Technology Data Exchange (ETDEWEB)

    Maxein, Karl Dominik

    2009-12-15

    Lithium niobate (LiNbO{sub 3}) is a widely employed material in nonlinear optics and photonics. Its usage is hampered by the photorefractive effect, which can destroy beam profiles and phase matching conditions. Existing methods to suppress photorefraction fail for the interesting regime of very high intensities and short pulses. Therefore, the photorefractive effect is investigated using femtosecond laser pulses: By utilizing so-called 2K holography, the occupation of energetically shallow traps is observed to occur in less than 100 fs after a two-photon excitation. Writing of photorefractive gratings into oxidized iron-doped LiNbO{sub 3} is much faster with pulses than with cw light. This is explained by the sensitization of the crystal due to charge trapping in photorefractive centers after nonlinear excitations. Finally, light-induced scattering of pulse light is suppressed compared to the scattering of cw light due to the small coherence length of pulses. (orig.)

  14. Total internal reflection quasiphase matching-based broadband second harmonic generation in a plane-parallel uniaxial crystal of lithium niobate

    Science.gov (United States)

    Barma, Minakshi Deb; Deb, Sumita; Saha, Ardhendu

    2018-01-01

    The present work analytically investigates the generation of broadband second harmonic (SH) using total internal reflection (TIR) quasiphase matching technique in a plane-parallel uniaxial crystal having optic axis nonparallel with respect to the horizontal base. A computer-aided simulation has been performed using lithium niobate as the nonlinear material to determine the possibility of generating broadband SH intensity when broadband fundamental laser radiation is allowed to undergo TIR inside the crystal. The simulated results indicate a peak conversion efficiency of 5.22% with a spectral bandwidth (BW) of 116 nm, centered at 2.258 μm in a 10-mm-long slab. The effect of variation in operating temperature, crystal length, crystal thickness, angle of deviation of optic axis, and angle of incidence of fundamental beam at the air-prism interface on efficiency and BW of resulting SH output has been studied.

  15. High Line

    DEFF Research Database (Denmark)

    Kiib, Hans

    2015-01-01

    . The High Line project has been carried out as part of an open conversion strategy. The result is a remarkable urban architectural project, which works as a catalyst for the urban development of Western Manhattan. The greater project includes the restoration and reuse of many old industrial buildings......At just over 10 meters above street level, the High Line extends three kilometers through three districts of Southwestern Manhattan in New York. It consists of simple steel construction, and previously served as an elevated rail line connection between Penn Station on 34th Street and the many...... in close proximity to the park bridge and new projects being added to fit the context. The outcome is a conglomeration of non-contemporary urban activities along the High Line, where mechanical workshops, small wholesale stores. etc. mix with new exclusive residential buildings, eminent cafés...

  16. World lines.

    OpenAIRE

    Waser Jürgen; Fuchs Raphael; Ribicic Hrvoje; Schindler Benjamin; Blöschl Günther; Gröller Eduard

    2010-01-01

    In this paper we present World Lines as a novel interactive visualization that provides complete control over multiple heterogeneous simulation runs. In many application areas decisions can only be made by exploring alternative scenarios. The goal of the suggested approach is to support users in this decision making process. In this setting the data domain is extended to a set of alternative worlds where only one outcome will actually happen. World Lines integrate simulation visualization and...

  17. Insertion of the LINE-1 element in the C-MYC gene and immunoreactivity of C-MYC, p53, p21 and p27 proteins in different morphological patterns of the canine TVT

    Directory of Open Access Journals (Sweden)

    C.R.O. Lima

    2016-06-01

    Full Text Available ABSTRACT The canine transmissible venereal tumor (TVT affects the external genitalia of dogs by the natural transplant of viable tumor cells. Thus, this research aimed to diagnose and characterize TVT morphological patterns, identify the insertion of the LINE-1 element in C-MYC gene, by means of the polymerase chain reaction (PCR, and evaluate the immunohistochemical expression of C-MYC, p53, p21 and p27 proteins. The relationship between C-MYC and p53 proteins and their interference on the expression of p21 and p27 were also studied. For that, 20 samples of naturally occurring TVT were used, subjected to cytopathological, histopathological and immunohistochemical analysis, and to molecular diagnosis of neoplasia. The increased tissue expression and the correlation among C-MYC, p53, p21 and p27 proteins indicate reduction and/or loss of their functionality in the TVT microenvironment, with consequent apoptotic suppression, maintenance of cell growth and progression of neoplasia.

  18. The Formation of Self-Organized Domain Structures at Non-Polar Cuts of Lithium Niobate as a Result of Local Switching by an SPM Tip

    Directory of Open Access Journals (Sweden)

    Anton Turygin

    2017-09-01

    Full Text Available We have studied experimentally the interaction of isolated needle-like domains created in an array via local switching using a biased scanning probe microscope (SPM tip and visualized via piezoelectric force microscopy (PFM at the non-polar cuts of MgO-doped lithium niobate (MgOLN crystals. It has been found that the domain interaction leads to the intermittent quasiperiodic and chaotic behavior of the domain length in the array in a manner similar to that of polar cuts, but with greater spacing between the points of bias application and voltage amplitudes. It has also been found that the polarization reversal at the non-polar cuts and domain interaction significantly depend on humidity. The spatial distribution of the surface potential measured by Kelvin probe force microscopy in the vicinity of the charged domain walls revealed the decrease of the domain length as a result of the partial backswitching after pulse termination. The phase diagram of switching behavior as a function of tip voltage and spacing between the points of bias application has been plotted. The obtained results provide new insight into the problem of the domain interaction during forward growth and can provide a basis for useful application in nanodomain engineering and development of non-linear optical frequency converters, data storage, and computing devices.

  19. Accurate determination of the anisotropy factors and the phase differences of Raman polarizabilities in some uniaxial crystals: the case of lithium niobate.

    Science.gov (United States)

    Djiedeu, N; Mohamadou, B; Bourson, P; Aillerie, M

    2009-01-07

    The present study highlights self-consistently helpful improvements dedicated to overcoming the difficulty resulting from the fitting procedure of integrated Raman intensities recorded according to the rotation crystal method described earlier. To this end, the anisotropy factors of Raman polarizabilities and the corresponding relative phases are determined within the framework of the exact mathematical derivation of the phase factors. These are the relevant parameters of the Raman efficiency relations which are numerically difficult to obtain from the fitting of the integrated areas. The present theoretical approach is then applied to the modes of the A(1) and Ey symmetry species of the lithium niobate (LN) crystal point group. All the expressions of the Raman absolute intensities of the A(1) and Ey irreducible representations initially imply three parameters to be determined from the fitting computations. However, from the derived analytical expressions of the phase differences, the number of parameters involved in the fitting procedure is reduced from 3 to 2, thus improving the statistics of the numerical treatment.

  20. Characterization and control of the electro-optic phase dispersion in lithium niobate modulators for wide spectral band interferometry applications in the mid-infrared.

    Science.gov (United States)

    Heidmann, S; Ulliac, G; Courjal, N; Martin, G

    2017-05-10

    Mid-infrared wideband modulation (3.2-3.7 μm) is achieved in an electro-optic Y-junction using lithium niobate waveguides in TE polarized light. Comparison between external (scanning mirror) and internal (electro-optical) modulation allows studying the chromatic polynomial dependence of the relative phase. Internal modulation consists on a V AC ramp up to 370 V at 0.25 Hz, applied over 14 mm long electrodes with 14 μm separation. The overall V π L π obtained is 17.5 V·cm, meaning that using a 300 V generator we can actively scan and track the whole L-band (3.4-4.1 μm) wideband fringes. We observe a dramatic reduction of the coherence length under electro-optic modulation, which is attributed to a strong nonlinear dependence of the electro-optic effect on the wavelength upon application of such high voltages. We study the effect of applying a V DC offset, from -50  V to 200 V (50 V step). We characterize this dispersion and propose an improved dispersion model that is used to show active dispersion compensation in wideband fringe modulation in the mid-infrared. This can be useful for long baseline interferometry or pulse compression applications when light propagates along fibers, in order to compensate for chromatic effects that induce differential dispersion or pulse spreading, respectively.

  1. Remarkable Strontium B-Site Occupancy in FerroelectricPb(Zr1-xTix)O3 Solid Solutions Doped with Cryolite-Type StrontiumNiobate

    Energy Technology Data Exchange (ETDEWEB)

    Feltz, A.; Schmidt-Winkel, P.; Schossman, M.; Booth, C.H.; Albering, J.

    2007-04-26

    New high-performance ferroelectric materials based on Pb(Zr{sub 1-x}Ti{sub x})O{sub 3} (PZT) that are doped with cryolite-type strontium niobate (SNO, Sr{sub 4}(Sr{sub 2-2y/3}Nb{sub 2+2y/3})O{sub 11+y}V{sub 0,1-y} with 0 {le} y {le} 1), hence denoted PZT:SNO, and their microscopic structure are described. The combination of exceptional piezoelectric properties, i.e. a piezoelectric strain constant of d{sub 33} {approx} 760 pm/V, with excellent stability and degradation resistance makes ferroelectric PZT:SNO solid solutions very attractive for use in novel and innovative piezoelectric actuator and transducer applications. Extended X-ray absorption fine-structure (EXAFS) analyses of PZT:SNO samples revealed that {approx}10 % of the Sr cations occupy the nominal B-sites of the perovskite-type PZT host lattice. This result was supported by EXAFS analyses of both a canonical SrTiO{sub 3} perovskite and two SNO model and reference compounds. Fit models that do not account for Sr cations on B-sites were ruled out. A clear Sr-Pb peak in Fourier transformed EXAFS data visually confirmed this structural model. The generation of temporary oxygen vacancies and the intricate defect chemistry induced by SNO-doping of PZT are crucial for the exceptional materials properties exhibited by PZT:SNO materials.

  2. Local environments and transport properties of heavily doped strontium barium niobates Sr0.5Ba0.5Nb2O6

    Science.gov (United States)

    Ottini, Riccardo; Tealdi, Cristina; Tomasi, Corrado; Tredici, Ilenia G.; Soffientini, Alessandro; Burriel, Ramón; Palacios, Elías; Castro, Miguel; Anselmi-Tamburini, Umberto; Ghigna, Paolo; Spinolo, Giorgio

    2018-02-01

    Undoped as well as K-doped (40%), Y-doped (40%), Zr-doped (10%), and Mo-doped (12.5%) strontium barium niobate Sr0.5Ba0.5Nb2O6 (SBN50) materials have been investigated to explore the effect of heavy doping on the structural and functional properties (thermo-power, thermal and electrical conductivities) both in the as prepared (oxidized) and reduced states. For all materials, the EXAFS spectra at the Nb - K edge can be consistently analyzed with the same model of six shells around the Nb sites. Doping mostly gives a simple size effect on the structural parameters, but doping on the Nb sites weakens the Nb-O bond regardless of dopant size and charge. Shell sizes and Debye-Waller factors are almost unaffected by temperature and oxidation state, and the disorder is of static nature. The functional effects of heavy doping do not agree with a simple model of hole or electron injection by aliovalent substitutions on a large band gap semiconductor. With respect to the undoped samples, doping with Mo depresses the thermal conductivity by 30%, Y doping enhances the electrical conductivity by an order of magnitude, while Zr doping increases the Seebeck coefficient by a factor of 2-3. Globally, the ZT efficiency factor of the K-, Y-, and Zr-doped samples is enhanced at least by one order of magnitude with respect to the undoped or Mo-doped materials.

  3. Efficient Translation of Pelargonium line pattern virus RNAs Relies on a TED-Like 3´-Translational Enhancer that Communicates with the Corresponding 5´-Region through a Long-Distance RNA-RNA Interaction.

    Directory of Open Access Journals (Sweden)

    Marta Blanco-Pérez

    Full Text Available Cap-independent translational enhancers (CITEs have been identified at the 3´-terminal regions of distinct plant positive-strand RNA viruses belonging to families Tombusviridae and Luteoviridae. On the bases of their structural and/or functional requirements, at least six classes of CITEs have been defined whose distribution does not correlate with taxonomy. The so-called TED class has been relatively under-studied and its functionality only confirmed in the case of Satellite tobacco necrosis virus, a parasitic subviral agent. The 3´-untranslated region of the monopartite genome of Pelargonium line pattern virus (PLPV, the recommended type member of a tentative new genus (Pelarspovirus in the family Tombusviridae, was predicted to contain a TED-like CITE. Similar CITEs can be anticipated in some other related viruses though none has been experimentally verified. Here, in the first place, we have performed a reassessment of the structure of the putative PLPV-TED through in silico predictions and in vitro SHAPE analysis with the full-length PLPV genome, which has indicated that the presumed TED element is larger than previously proposed. The extended conformation of the TED is strongly supported by the pattern of natural sequence variation, thus providing comparative structural evidence in support of the structural data obtained by in silico and in vitro approaches. Next, we have obtained experimental evidence demonstrating the in vivo activity of the PLPV-TED in the genomic (g RNA, and also in the subgenomic (sg RNA that the virus produces to express 3´-proximal genes. Besides other structural features, the results have highlighted the key role of long-distance kissing-loop interactions between the 3´-CITE and 5´-proximal hairpins for gRNA and sgRNA translation. Bioassays of CITE mutants have confirmed the importance of the identified 5´-3´ RNA communication for viral infectivity and, moreover, have underlined the strong evolutionary

  4. Efficient Translation of Pelargonium line pattern virus RNAs Relies on a TED-Like 3´-Translational Enhancer that Communicates with the Corresponding 5´-Region through a Long-Distance RNA-RNA Interaction.

    Science.gov (United States)

    Blanco-Pérez, Marta; Pérez-Cañamás, Miryam; Ruiz, Leticia; Hernández, Carmen

    2016-01-01

    Cap-independent translational enhancers (CITEs) have been identified at the 3´-terminal regions of distinct plant positive-strand RNA viruses belonging to families Tombusviridae and Luteoviridae. On the bases of their structural and/or functional requirements, at least six classes of CITEs have been defined whose distribution does not correlate with taxonomy. The so-called TED class has been relatively under-studied and its functionality only confirmed in the case of Satellite tobacco necrosis virus, a parasitic subviral agent. The 3´-untranslated region of the monopartite genome of Pelargonium line pattern virus (PLPV), the recommended type member of a tentative new genus (Pelarspovirus) in the family Tombusviridae, was predicted to contain a TED-like CITE. Similar CITEs can be anticipated in some other related viruses though none has been experimentally verified. Here, in the first place, we have performed a reassessment of the structure of the putative PLPV-TED through in silico predictions and in vitro SHAPE analysis with the full-length PLPV genome, which has indicated that the presumed TED element is larger than previously proposed. The extended conformation of the TED is strongly supported by the pattern of natural sequence variation, thus providing comparative structural evidence in support of the structural data obtained by in silico and in vitro approaches. Next, we have obtained experimental evidence demonstrating the in vivo activity of the PLPV-TED in the genomic (g) RNA, and also in the subgenomic (sg) RNA that the virus produces to express 3´-proximal genes. Besides other structural features, the results have highlighted the key role of long-distance kissing-loop interactions between the 3´-CITE and 5´-proximal hairpins for gRNA and sgRNA translation. Bioassays of CITE mutants have confirmed the importance of the identified 5´-3´ RNA communication for viral infectivity and, moreover, have underlined the strong evolutionary constraints that may

  5. production lines

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2000-01-01

    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  6. Line facilities outline

    International Nuclear Information System (INIS)

    1998-08-01

    This book deals with line facilities. The contents of this book are outline line of wire telecommunication ; development of line, classification of section of line and theory of transmission of line, cable line ; structure of line, line of cable in town, line out of town, domestic cable and other lines, Optical communication ; line of optical cable, transmission method, measurement of optical communication and cable of the sea bottom, Equipment of telecommunication line ; telecommunication line facilities and telecommunication of public works, construction of cable line and maintenance and Regulation of line equipment ; regulation on technique, construction and maintenance.

  7. Parallel Lines

    Directory of Open Access Journals (Sweden)

    James G. Worner

    2017-05-01

    Full Text Available James Worner is an Australian-based writer and scholar currently pursuing a PhD at the University of Technology Sydney. His research seeks to expose masculinities lost in the shadow of Australia’s Anzac hegemony while exploring new opportunities for contemporary historiography. He is the recipient of the Doctoral Scholarship in Historical Consciousness at the university’s Australian Centre of Public History and will be hosted by the University of Bologna during 2017 on a doctoral research writing scholarship.   ‘Parallel Lines’ is one of a collection of stories, The Shapes of Us, exploring liminal spaces of modern life: class, gender, sexuality, race, religion and education. It looks at lives, like lines, that do not meet but which travel in proximity, simultaneously attracted and repelled. James’ short stories have been published in various journals and anthologies.

  8. Study of light-induced processes in lithium niobate crystals with femtosecond light pulses; Untersuchung lichtinduzierter Prozesse in Lithiumniobat-Kristallen mit Femtosekunden-Lichtpulsen

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, O.

    2005-12-15

    For the realization of many applications with LiNbO{sub 3} a deeper understanding of nonlinear processes for high light intensities and the charge-carrier dynamics on short time scales is necessary. For the study in this thesis femtosecond pulses with a lifetime of {tau}{approx}200 fs are applied. By pump pulses ({lambda}{sub p}=388 nm) absorption changes are caused, which are detected time-resolvedly by probe pulses ({lambda}{sub r}=776 nm) respectively continuous light ({lambda}{sub r}=785 nm). For the absorption centers absorption cross sections of {sigma}{sub YY}{approx}9.2 x 10{sup -22} m{sup 2} for ordinarily {sigma}{sub Z}Z{approx}6.0 x 10{sup -22} m{sup 2} for extraordinarily polarized light of the wavelength {lambda}{sub r}=776 nm result.Polarization and wavelength dependence as well as the comparison with nanosecond pulses suggest that the absorption centers are small polarons, which exist already 400 fs after the excitation of the charge carriers. At holographic pump probe studies, which are sensitive both for absorption and for refractive-index changes, gratings with two pump pulses are generated and read out by one pump pulse. The time dependence of the diffraction efficiency of the transient grating in LiNbO{sub 3} exhibits first a symmetric maximum, the time width of which is compatible with the expectations from model calculations. Thereafter the diffraction efficiency decreases to a constant value in the picosecond range and decreases further on the nanosecond time scale. By illumination of iron-doped lithium niobate crystals with 1.5 {mu}m femtosecond pulses permanent refractive-index changes in the range {delta}n{approx}10{sup -3} ({lambda}=633 nm) are generated.

  9. Holographic recording in a doubly doped lithium niobate crystal with two wavelengths: a blue laser diode and a green laser

    Science.gov (United States)

    Komori, Yuichi; Ishii, Yukihiro

    2010-08-01

    A doubly-doped LiNbO3 (LN) crystal has been well used as a nonvolatile two-wavelength recording material. By using two levels of the crystal, two-kind holograms can be recorded on one crystal; a hologram is recorded with a 405-nm blue laser diode (LD) for a deep Mn level, and another hologram is with a 532-nm green laser for a shallow Fe level. The recording capacity doubles. A 780-nm LD is non-volatile reconstructing source since the LD line is insensitive to both levels. Multiplexed reconstructed images are demonstrated by using a sharp angular selectivity of a volume LN crystal keeping Bragg condition with spherical reconstructions.

  10. High-pressure phase behaviors of ZnTiO3: ilmenite-perovskite transition, decomposition of perovskite into constituent oxides, and perovskite-lithium niobate transition

    Science.gov (United States)

    Akaogi, M.; Abe, K.; Yusa, H.; Kojitani, H.; Mori, D.; Inaguma, Y.

    2015-06-01

    High-pressure high-temperature phase transitions of ZnTiO3 ilmenite were examined using multianvil apparatus up to 25.5 GPa and 1,500 °C and diamond anvil cell to 26.5 GPa and about 2,000 °C. Combined results of the multianvil quench experiments and in situ diamond anvil cell experiments indicated that at about 10 GPa and 1,200 °C ZnTiO3 ilmenite transforms to orthorhombic perovskite which is converted to lithium niobate phase on release of pressure. The boundary of the ilmenite-provskite transition is expressed by P(GPa) = 15.9 - 0.005 T (°C). The high-pressure experiments also indicated that at 20-24 GPa and 1,000-1,400 °C ZnTiO3 orthorhombic perovskite dissociates into rocksalt-type ZnO + baddeleyite-type TiO2 which are recovered, respectively, as wurtzite-type ZnO and α-PbO2-type TiO2 at 1 atm. The boundary of the perovskite dissociation is expressed by P(GPa) = 8.7 + 0.011 T (°C). Molar volume changes of ZnTiO3 at ambient conditions were estimated as -4.7 % for the ilmenite-perovskite transition and -3.5 % for the perovskite decomposition into the oxides. The absence of CaIrO3-type postperovskite in ZnTiO3 is consistent with that dissociation of ZnTiO3 perovskite into the oxides has the larger molar volume change than -1 to -2 % of the perovskite-postperovskite transition in various ABO3 compounds and with previous data that ABO3 perovskites with relatively ionic B-O bonds do not transform to the postperovskite. The transition behaviors of ZnTiO3 are similar to those of MnTiO3 and FeTiO3, but ZnTiO3 perovskite dissociates into the constituent oxides.

  11. Lines of landscape organisation

    DEFF Research Database (Denmark)

    Løvschal, Mette

    2015-01-01

    This paper offers a landscape analysis of the earliest linear landscape boundaries on Skovbjerg Moraine, Denmark, during the first millennium BC. Using Delaunay triangulation as well as classic distribution analyses, it demonstrates that landscape boundaries articulated already established use......-patterns close to roads, but also intercepted the central lines of movement and conflicted with previous ways of organizing the landscape. This development is interpreted as a different form of large-scale landholding, in which livestock possibly played a dominant role and boundaries were used to confiscate land...... in the zones bordering suitable pastures. This situation shows obvious parallels with southern Britain centuries earlier. It is discussed how the study of these physical boundaries provides new insights into the organization of pre-Roman landscapes, not only demonstrating a continuing engagement with landscape...

  12. LINE FUSION GENES: a database of LINE expression in human genes

    Directory of Open Access Journals (Sweden)

    Park Hong-Seog

    2006-06-01

    Full Text Available Abstract Background Long Interspersed Nuclear Elements (LINEs are the most abundant retrotransposons in humans. About 79% of human genes are estimated to contain at least one segment of LINE per transcription unit. Recent studies have shown that LINE elements can affect protein sequences, splicing patterns and expression of human genes. Description We have developed a database, LINE FUSION GENES, for elucidating LINE expression throughout the human gene database. We searched the 28,171 genes listed in the NCBI database for LINE elements and analyzed their structures and expression patterns. The results show that the mRNA sequences of 1,329 genes were affected by LINE expression. The LINE expression types were classified on the basis of LINEs in the 5' UTR, exon or 3' UTR sequences of the mRNAs. Our database provides further information, such as the tissue distribution and chromosomal location of the genes, and the domain structure that is changed by LINE integration. We have linked all the accession numbers to the NCBI data bank to provide mRNA sequences for subsequent users. Conclusion We believe that our work will interest genome scientists and might help them to gain insight into the implications of LINE expression for human evolution and disease. Availability http://www.primate.or.kr/line

  13. Polyhedral patterns

    KAUST Repository

    Jiang, Caigui

    2015-10-27

    We study the design and optimization of polyhedral patterns, which are patterns of planar polygonal faces on freeform surfaces. Working with polyhedral patterns is desirable in architectural geometry and industrial design. However, the classical tiling patterns on the plane must take on various shapes in order to faithfully and feasibly approximate curved surfaces. We define and analyze the deformations these tiles must undertake to account for curvature, and discover the symmetries that remain invariant under such deformations. We propose a novel method to regularize polyhedral patterns while maintaining these symmetries into a plethora of aesthetic and feasible patterns.

  14. Ion-beam enhanced etching for the 3D structuration of lithium niobate; Ionenstrahlverstaerktes Aetzen fuer die 3D-Strukturierung von Lithiumniobat

    Energy Technology Data Exchange (ETDEWEB)

    Gischkat, Thomas

    2010-01-12

    The present thesis deals with the usage of the ion-beam enhanced etching (IBEE) for the 3D structuration of lithium niobate (LiNbO{sub 3}).Hereby the approach of the enhancement of the wet-chemical etching rate due to the irradiation with energetic ions is pursued. This method is very success promising for the realization of micro- and nanostructures with perpendicular structural walls as well as small roughnesses. The aim of this thesis consisted therein to form the foundations for the realization of three-dimensional micro- and nanostructures (for instance: Layer systems and photonic crystals) in LiNbO{sub 3} with high optical quality and to demonstrate on selected examples. Conditions for the success of the IBEE structuration technique is first of all the understanding of the defect formation under ion irradiation as well as the radiation-induced structure changes in the crystal and the change of the chemical resistance connected with this. For this the defect formation was studied in dependence on th ion mass, the ion energy, and the irradiation temperature. Thermally induced influences and effects on the radiation damage, as they can occur in intermediate steps in the complex processing, must be known and were studied by means of subsequent temperature treatment. The results from the defect studies were subsequently applied for the fabrication of micro- and nanostructures in LiNbO{sub 3}. Shown is the realization of lateral structure with nearly perpendicular structure walls as well as the realization of thin membranes and slits. The subsequent combination of lateral structuration with the fabrication of thin membranes and slits allowed the three-dimensional structuration of LiNbO{sub 3}. This is exemplarily shown for a microresonator and for a 2D photonic crystal with below lying air slit. [German] Die vorliegende Arbeit beschaeftigt sich mit der Ausnutzung des ionenstrahlverstaerkten Aetzens (IBEE: Ion Beam Enhanced Etching) fuer die 3D-Strukturierung von

  15. Specialization Patterns

    DEFF Research Database (Denmark)

    Schultz, Ulrik Pagh; Lawall, Julia Laetitia; Consel, Charles

    2000-01-01

    of design patterns. In this paper, we analyze the specialization opportunities provided by specific uses of design patterns. Based on the analysis of each design pattern, we define the associated specialization pattern. These specialization opportunities can be declared using the specialization classes......Design patterns offer many advantages for software development, but can introduce inefficiency into the final program. Program specialization can eliminate such overheads, but is most effective when targeted by the user to specific bottlenecks. Consequently, we propose that these concepts...... are complementary. Program specialization can optimize programs written using design patterns, and design patterns provide information about the program structure that can guide specialization. Concretely, we propose specialization patterns, which describe how to apply program specialization to optimize uses...

  16. Specialization Patterns

    DEFF Research Database (Denmark)

    Schultz, Ulrik Pagh; Lawall, Julia Laetitia; Consel, Charles

    2000-01-01

    Design patterns offer many advantages for software development, but can introduce inefficiency into the final program. Program specialization can eliminate such overheads, but is most effective when targeted by the user to specific bottlenecks. Consequently, we propose that these concepts...... are complementary. Program specialization can optimize programs written using design patterns, and design patterns provide information about the program structure that can guide specialization. Concretely, we propose specialization patterns, which describe how to apply program specialization to optimize uses...... of design patterns. In this paper, we analyze the specialization opportunities provided by specific uses of design patterns. Based on the analysis of each design pattern, we define the associated specialization pattern. These specialization opportunities can be declared using the specialization classes...

  17. Rare earth niobate coordination polymers

    Science.gov (United States)

    Muniz, Collin N.; Patel, Hiral; Fast, Dylan B.; Rohwer, Lauren E. S.; Reinheimer, Eric W.; Dolgos, Michelle; Graham, Matt W.; Nyman, May

    2018-03-01

    Rare-earth (RE) coordination polymers are infinitely tailorable to yield luminescent materials for various applications. Here we described the synthesis of a heterometallic rare-earth coordination compound ((CH3)2SO)3(RE)NbO(C2O4)3((CH3)2SO) = dimethylsulfoxide, DMSO, (C2O2= oxalate), (RE=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb). The structure was obtained from single crystal X-ray diffraction of the La analogue. The Nb˭O and DMSO terminal-bonding character guides assembly of an open framework structure with noncentrosymmetric RE-coordination geometry, and large spacing between the RE centers. A second structure was observed by PXRD for the smaller rare earths (Dy, Ho, Er, Yb); this structure has not yet been determined. The materials were further characterized using FTIR, and photoluminescence measurements. Characteristic excitation and emission transitions were observed for RE = Nd, Sm, Eu, and Tb. Quantum yield (QY) measurements were performed by exciting Eu and Tb analoges at 394 nm (QY 66%) and 464 nm (QY 71%) for Eu; and 370 nm (QY=40%) for Tb. We attribute the high QY and bright luminescence to two main structure-function properties of the system; namely the absence of water in the structure, and absence of concentration quenching.

  18. In-ovo sexing of 14-day-old chicken embryos by pattern analysis in hyperspectral images (VIS/NIR spectra): A non-destructive method for layer lines with gender-specific down feather color.

    Science.gov (United States)

    Göhler, Doreen; Fischer, Björn; Meissner, Sven

    2017-01-01

    Up to now there is no economically maintainable modality for chicken sexing in early embryonic stages (first 3 d) that is suitable for large-scale application in the commercial hatcheries. Hence, the culling of male day-old chicks of layer lines is still the normal procedure.In this paper we present a non-destructive optical technique for gender determination in layer lines with gender-specific down feather color. This particular chicken strain presents a sexual dimorphism in feather color, where the female day-old chicks have brown down feathers and the males have yellow down feathers.The eggs are candled with halogen lamps and a hyperspectral camera collects the transmitted light within the spectral range from 400 nm to 1,000 nm. For data analysis and classification, common methods like principal component analysis and linear discriminant analysis are used. The accuracy of gender determination was determined for 11- to 14-day-old embryos. At 14 d of incubation (7 d before hatch) the sex can be determined with an overall accuracy of approximately 97%. © 2016 Poultry Science Association Inc.

  19. Real-World Treatment Patterns, Survival, and Prediction of CNS Progression in ALK-Positive Non-Small-Cell Lung Cancer Patients Treated with First-Line Crizotinib in Latin America Oncology Practices.

    Science.gov (United States)

    Martín, Claudio; Cardona, Andrés F; Zatarain-Barrón, Zyanya Lucia; Ruiz-Patiño, Alejandro; Castillo, Omar; Oblitas, George; Corrales, Luis; Lupinacci, Lorena; Pérez, María Angelina; Rojas, Leonardo; González, Lisde; Chirinos, Luis; Ortíz, Carlos; Lema, Mauricio; Vargas, Carlos; Puparelli, Carmen; Carranza, Hernán; Otero, Jorge; Arrieta, Oscar

    2018-03-06

    This study describes the real-world characteristics, treatment sequencing, and outcomes among Hispanic patients with locally advanced/metastatic ALK-positive non-small-cell lung cancer (NSCLC) treated with crizotinib. A retrospective patient review was conducted for several centers in Latin America. Clinicians identified ALK-positive NSCLC patients who received crizotinib and reported their clinical characteristics, treatments, and survival. Overall survival and progression-free survival (PFS) were described. A Random Forest Tree (RFT) model was constructed to predict brain progression. A total of 73 patients were included; median age at diagnosis was 58 years, 60.3% were female, and 93.2% had adenocarcinoma. Eighty-nine percent of patients were never smokers/former smokers, 71.1% had ≥2 sites of metastasis, and 20.5% had brain metastases at diagnosis. The median PFS on first-line crizotinib was 7.07 months (95% CI 3.77-12.37) and the overall response rate was 52%. Of those who discontinued crizotinib, 55.9% progressed in the central nervous system (CNS). The RFT model reached a sensitivity of 100% and a specificity of 88% for prediction of CNS progression. The overall response rate and the PFS observed in Hispanic patients with ALK-positive NSCLC treated with first-line crizotinib were similar to those in previous reports. An RFT model is helpful in predicting CNS progression and can help clinicians tailor treatments in a resource-limited practice. © 2018 S. Karger AG, Basel.

  20. Comparison of protein patterns of xrs-5, a radiosensitive Chinese hamster ovary cell line, and CHO-K1, its radioresistant parent, using two-dimensional gel-electrophoresis

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, J.M. (Miami Univ., Oxford, OH (USA). Dept. of Zoology)

    1991-01-01

    X-ray sensitive strains of Chinese hamster ovary cell lines have been used to analyze radiation repair mechanisms. One cell line, xrs-5, has been shown to be very sensitive to ionizing radiation and radical forming chemical mutagens. This sensitivity is thought to be a result a mutation in the DNA double strand break (DSB) repair mechanism, and its characterization has been a goal of several repair mechanism studies. Using two-dimensional gel electrophoresis, we have detected a protein (MW approximately 55KD) in the DNA/Nuclear Matrix (nucleoid) cell fraction of CHO-Kl cells that is absent in the nucleoid fraction of xrs-5. This protein is present, however, in both CHO-Kl and xrs-5 whole cell protein maps. To determine whether the 55KD protein is responsible for the radiosensitive and defective DSB repair phenotype of xrs-5 cells, studies are now underway to analyze revertants of xrs-5 that are proficient in DSB repair. Furthermore, an effort to sequence the protein in question is planned. 23 refs., 2 figs.

  1. Electromagnetic energy flow lines as possible paths of photons

    Energy Technology Data Exchange (ETDEWEB)

    Davidovic, M [Faculty of Civil Engineering, University of Belgrade, Bulevar Kralja Aleksandra 73, 11000 Belgrade (Serbia); Sanz, A S; Miret-Artes, S [Instituto de Fisica Fundamental, Consejo Superior de Investigaciones CientIficas, Serrano 123, 28006 Madrid (Spain); Arsenovic, D; Bozic, M [Institute of Physics, University of Belgrade, Pregrevica 118, 11080 Belgrade (Serbia)], E-mail: milena@grf.bg.ac.yu, E-mail: asanz@imaff.cfmac.csic.es, E-mail: arsenovic@phy.bg.ac.yu, E-mail: bozic@phy.bg.ac.yu, E-mail: s.miret@imaff.cfmac.csic.es

    2009-07-15

    Motivated by recent experiments where interference patterns behind a grating are obtained by accumulating single photon events, we provide here an electromagnetic energy flow-line description to explain the emergence of such patterns. We find and discuss an analogy between the equation describing these energy flow lines and the equation of Bohmian trajectories used to describe the motion of massive particles.

  2. Récuperation d'horloge d'un signal OTDM à 640 Gbit/s transmis sur 50 km par boucle à verrouillage de phase opto-électronique utilisant un dispositif en Niobate de Lithium à inversion de domaines

    DEFF Research Database (Denmark)

    Gomez, F.; Ware, Agis C.; Oxenløwe, Leif Katsuo

    2008-01-01

    L'extraction d'horloge d'un signal OTDM à 640 Gbit/s, transmis sur 50 km, à partir d'une boucle à verrouillage de phase utilisant l'effet non-linéaire de mélange à trois ondes dans un composant de niobate de lithium à inversion de domaines a été mise en oeuvre.......L'extraction d'horloge d'un signal OTDM à 640 Gbit/s, transmis sur 50 km, à partir d'une boucle à verrouillage de phase utilisant l'effet non-linéaire de mélange à trois ondes dans un composant de niobate de lithium à inversion de domaines a été mise en oeuvre....

  3. Cable line engineering

    International Nuclear Information System (INIS)

    Jang, Hak Sin; Kim, Sin Yeong

    1998-02-01

    This book is about cable line engineering. It is comprised of nine chapters, which deals with summary of cable communication such as way, process of cable communication and optical communication, Line constant of transmission on primary constant, reflection and crosstalk, communication cable line of types like flat cable, coaxial cable and loaded cable, Install of communication line with types and facility of aerial line, construction method of communication line facility, Measurement of communication line, Carrier communication of summary, PCM communication with Introduction, regeneration relay system sampling and quantization and Electric communication service and general information network with mobile communication technique and satellite communication system.

  4. Shells and Patterns

    Science.gov (United States)

    Sutley, Jane

    2009-01-01

    "Shells and Patterns" was a project the author felt would easily put smiles on the faces of her fifth-graders, and teach them about unity and the use of watercolor pencils as well. It was thrilling to see the excitement in her students as they made their line drawings of shells come to life. For the most part, they quickly got the hang of…

  5. Pyro-electrification of polymer membranes for cell patterning

    Energy Technology Data Exchange (ETDEWEB)

    Rega, R.; Gennari, O.; Mecozzia, L.; Grilli, S.; Pagliarulo, V.; Ferraro, P. [National Council of Research, Institute of Applied Science & Intelligent Systems (ISASI) ‘E. Caianiello’, Via Campi Flegrei 34, 80078 Pozzuoli (Italy)

    2016-05-18

    In the recent years, much attention has been devoted to the possibility of charging polymer-based materials, due to their potential in developing large-scale and inexpensive flexible thin-film technology. The availability of localized electrostatic fields is in of great interest for a huge amount of applications such as distribution of biomolecules and cells from the liquid phase. Here we report a voltage-free pyro-electrification (PE) process able to induce permanent dipoles into polymer layers; the lithium niobate (LN) crystal is the key component that plays the multi-purpose role of sustaining, heating and poling the polymer layer that is then peeled-off easily in order to have a free-standing charged membrane. The results show the fascinating application for the living cell patterning. It well known that cell behaviour is affected by chemical and topographical cues of substrate. In fact, polymers, such as polystyrene (PS) and poly(methyl methacrylate) (PMMA), are naturally cytophobic and require specific functionalization treatments in order to promote cell adhesion. Through our proposal technique, it’s possible to obtain spontaneous organization and a driven growth of SH-SY5Y cells that is solely dictated by the nature of the charge polymer surface, opening, in this way, the innovative chance to manipulate and transfer biological samples on a free-standing polymer layer [1].

  6. Pattern recognition

    CERN Document Server

    Theodoridis, Sergios

    2003-01-01

    Pattern recognition is a scientific discipline that is becoming increasingly important in the age of automation and information handling and retrieval. Patter Recognition, 2e covers the entire spectrum of pattern recognition applications, from image analysis to speech recognition and communications. This book presents cutting-edge material on neural networks, - a set of linked microprocessors that can form associations and uses pattern recognition to ""learn"" -and enhances student motivation by approaching pattern recognition from the designer's point of view. A direct result of more than 10

  7. VT Electric Transmission Line Corridors - corridor lines

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

  8. Foam patterns

    Science.gov (United States)

    Chaudhry, Anil R; Dzugan, Robert; Harrington, Richard M; Neece, Faurice D; Singh, Nipendra P; Westendorf, Travis

    2013-11-26

    A method of creating a foam pattern comprises mixing a polyol component and an isocyanate component to form a liquid mixture. The method further comprises placing a temporary core having a shape corresponding to a desired internal feature in a cavity of a mold and inserting the mixture into the cavity of the mold so that the mixture surrounds a portion of the temporary core. The method optionally further comprises using supporting pins made of foam to support the core in the mold cavity, with such pins becoming integral part of the pattern material simplifying subsequent processing. The method further comprises waiting for a predetermined time sufficient for a reaction from the mixture to form a foam pattern structure corresponding to the cavity of the mold, wherein the foam pattern structure encloses a portion of the temporary core and removing the temporary core from the pattern independent of chemical leaching.

  9. Geodesic patterns

    KAUST Repository

    Pottmann, Helmut

    2010-07-26

    Geodesic curves in surfaces are not only minimizers of distance, but they are also the curves of zero geodesic (sideways) curvature. It turns out that this property makes patterns of geodesics the basic geometric entity when dealing with the cladding of a freeform surface with wooden panels which do not bend sideways. Likewise a geodesic is the favored shape of timber support elements in freeform architecture, for reasons of manufacturing and statics. Both problem areas are fundamental in freeform architecture, but so far only experimental solutions have been available. This paper provides a systematic treatment and shows how to design geodesic patterns in different ways: The evolution of geodesic curves is good for local studies and simple patterns; the level set formulation can deal with the global layout of multiple patterns of geodesics; finally geodesic vector fields allow us to interactively model geodesic patterns and perform surface segmentation into panelizable parts. © 2010 ACM.

  10. Lined canvas paintings

    DEFF Research Database (Denmark)

    Krarup Andersen, Cecil

    2013-01-01

    This work evaluates the lining history of the Danish Golden Age collection of canvas paintings from the nineteenths century at SMK, The National Gallery of Denmark, and seeks to understand the moisture sensitivity of the paintings before and after lining. This is done by chemical analysis...... and tensile testing samples from the tacking edges as well as lined mock-up samples. The ability of the different lining techniques to support canvas paintings is evaluated in terms of their initial stretching and during fluctuations of relative humidity. Six different combinations of lining adhesives...... and textiles were examined. These included the adhesives Beva 371, Plextol D360, wax-resin, and glue-paste. The lining textiles were linen and polyester sailcloth. A naturally aged canvas painting and a modern painting were lined using these materials and methods. Testing of the lined paintings included uni...

  11. Challenges in line edge roughness metrology in directed self-assembly lithography: placement errors and cross-line correlations

    Science.gov (United States)

    Constantoudis, Vassilios; Papavieros, George; Gogolides, Evangelos; Pret, Alessandro Vaglio; Pathangi, Hari; Gronheid, Roel

    2017-04-01

    Directed self-assembly (DSA) lithography poses challenges in line edge roughness (LER)/line width roughness metrology due to its self-organized and pitch-based nature. To cope with these challenges, a characterization approach with metrics and/or updates of the older ones is required. To this end, we focus on two specific challenges of DSA line patterns: (a) the large correlations between the left and right edges of a line (line wiggling) and (b) the cross-line correlations, i.e., the resemblance of wiggling fluctuations of nearby lines. The first is quantified by the line center roughness whose low-frequency part is related to the local placement errors of device structures. For the second, we introduce the c-factor correlation function, which quantifies the strength of the correlations between lines versus their horizontal distance in pitches. The proposed characterization approach is first illustrated and explained in synthesized scanning electron microscope images with full control of their dimensional and roughness parameters; it is then applied to the analysis of line/space patterns obtained with the Liu-Nealey flow (post-Polymethyl methacrylate removal and pattern transfer), revealing the effects of pattern transfer on roughness and uniformity. Finally, we calculate the c-factor function of various next-generation lithography techniques and show their distinct footprint on the extent of cross-line correlations.

  12. Lined canvas paintings

    DEFF Research Database (Denmark)

    Krarup Andersen, Cecil

    2013-01-01

    and tensile testing samples from the tacking edges as well as lined mock-up samples. The ability of the different lining techniques to support canvas paintings is evaluated in terms of their initial stretching and during fluctuations of relative humidity. Six different combinations of lining adhesives...

  13. Visible light absorbance enhanced by nitrogen embedded in the surface layer of Mn-doped sodium niobate crystals, detected by ultra violet - visible spectroscopy, x-ray photoelectron spectroscopy, and electric conductivity tests

    Energy Technology Data Exchange (ETDEWEB)

    Molak, A., E-mail: andrzej.molak@us.edu.pl; Pilch, M. [Institute of Physics, University of Silesia, ul. Uniwersytecka 4, 40-007 Katowice (Poland)

    2016-05-28

    Sodium niobate crystals doped with manganese ions, Na(NbMn)O{sub 3}, were annealed in a nitrogen N{sub 2} flow at 600, 670, and 930 K. It was verified that simultaneous doping with Mn ions and annealing in nitrogen enhanced the photocatalytic features of sodium niobate. The transmission in the ultraviolet-visible range was measured at room temperature. The absorbance edge is in the range from 3.4 to 2.3 eV. The optical band gap E{sub gap} = 1.2–1.3 eV was evaluated using the Tauc relation. Crystals annealed at 670 K and 930 K exhibited an additional shift of the absorption edge of ∼20–40 nm toward longer wavelengths. The optical energy gap narrowed as a result of the superimposed effect of Mn and N co-doping. The x-ray photoelectron spectroscopy test showed that N ions incorporated into the surface layer. The valence band consisted of O 2p states hybridized with Nb 4d, Mn 3d, and N 2s states. The disorder detected in the surroundings of Nb and O ions decreased due to annealing. The binding energy of oxygen ions situated within the surface layer was E{sub B} ≈ 531 eV. The other contributions were assigned to molecular contamination. The contribution centered at 535.5 eV vanished after annealing at 600 K and 670 K. The contribution centered at 534 eV vanished after annealing at 930 K. The N{sub 2} annealing partly removed carbonates from the surfaces of the samples. In the 480–950 K range, the electric conductivity activation energy, E{sub a} = 0.7–1.2 eV, was comparable with the optical E{sub gap}. The electric permittivity showed dispersion in the 0.1–800 kHz range that corresponds to the occurrence of defects.

  14. Search Patterns

    CERN Document Server

    Morville, Peter

    2010-01-01

    What people are saying about Search Patterns "Search Patterns is a delight to read -- very thoughtful and thought provoking. It's the most comprehensive survey of designing effective search experiences I've seen." --Irene Au, Director of User Experience, Google "I love this book! Thanks to Peter and Jeffery, I now know that search (yes, boring old yucky who cares search) is one of the coolest ways around of looking at the world." --Dan Roam, author, The Back of the Napkin (Portfolio Hardcover) "Search Patterns is a playful guide to the practical concerns of search interface design. It cont

  15. Studies on physicochemical properties of pure and iron substituted chromium niobates, Cr{sub 1−x}Fe{sub x}NbO{sub 4} (x = 0, 0.2, 0.4, 0.6)

    Energy Technology Data Exchange (ETDEWEB)

    Sree Rama Murthy, A.; Gnanasekar, K.I. [Materials Chemistry and Metal Fuel Cycle Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India); Govindaraj, R. [Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India); Jayaraman, V., E-mail: vjram@igcar.gov.in [Materials Chemistry and Metal Fuel Cycle Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India); Umarji, A.M. [Materials Research Centre, Indian Institute of Science, Bangalore 560012 (India)

    2017-03-15

    Highlights: • Systematic increase in unit cell volume on iron substitution. • Similar mechanism of electronic conduction in these compositions. • Decrease in quadrupole splitting with increasing iron content in Mössbauer spectra. • Iron and chromium exhibited multiple valences, as identified from X-ray photoelectron spectra. - Abstract: Pristine and iron substituted chromium niobates (Cr{sub 1−x}Fe{sub x}NbO{sub 4} with x = 0, 0.2, 0.4 and 0.6) are prepared by solid-state synthesis and phase characterised by X-ray diffraction. Microstructure is determined using scanning electron microscope and micro-chemical analysis is performed by energy dispersive X-ray analysis (EDX). The current-voltage characteristics are studied in the temperature range of 423–723 K. The electrical conductivity of sintered pellets is measured by impedance spectroscopy. Temperature dependent magnetization studies are performed using vibrating sample magnetometer (VSM) and room temperature Bohr magneton number is calculated from the magnetic susceptibility data. The conductivity is passed through a minimum at x = 0.2 in Cr{sub 1−x}Fe{sub x}NbO{sub 4} for x = 0–0.6. X-ray photoelectron spectroscopic studies revealed the surface non-stoichiometry in these compositions.

  16. Covariant electromagnetic field lines

    Science.gov (United States)

    Hadad, Y.; Cohen, E.; Kaminer, I.; Elitzur, A. C.

    2017-08-01

    Faraday introduced electric field lines as a powerful tool for understanding the electric force, and these field lines are still used today in classrooms and textbooks teaching the basics of electromagnetism within the electrostatic limit. However, despite attempts at generalizing this concept beyond the electrostatic limit, such a fully relativistic field line theory still appears to be missing. In this work, we propose such a theory and define covariant electromagnetic field lines that naturally extend electric field lines to relativistic systems and general electromagnetic fields. We derive a closed-form formula for the field lines curvature in the vicinity of a charge, and show that it is related to the world line of the charge. This demonstrates how the kinematics of a charge can be derived from the geometry of the electromagnetic field lines. Such a theory may also provide new tools in modeling and analyzing electromagnetic phenomena, and may entail new insights regarding long-standing problems such as radiation-reaction and self-force. In particular, the electromagnetic field lines curvature has the attractive property of being non-singular everywhere, thus eliminating all self-field singularities without using renormalization techniques.

  17. Medial fracture line significance in calcaneus fracture.

    Science.gov (United States)

    Ogut, Tahir; Ayhan, Egemen; Kantarci, Fatih; Unlu, Mehmet C; Salih, Muhammet

    2011-01-01

    In Sanders' classification of calcaneus fractures, the medial fracture line (subtype C) is close to the tarsal canal, which contains an artery for the talus and calcaneus. We hypothesized that because of this brittle vascular localization, patients with C line fracture patterns might describe radiologic subtalar arthritis more often and have more complaints. The purpose of the present study was to compare the results of C line fracture patterns with other types of calcaneus fractures. A total of 25 surgically treated feet were involved. Regarding Sanders' classification, group 1 included fractures involving the C line (11 feet), and group 2 included fractures not involving the C line (14 feet). Patient age at admission, trauma date, and interval until surgery were obtained from the patients' medical records. The Bohler angles were determined from the radiographs. At the last follow-up visit, the radiologist graded subtalar arthritis using computed tomography. For clinical follow-up, the American Orthopaedic Foot and Ankle Society and Maryland scores were assessed. No significant differences were found in mean age, follow-up period, delay to surgery, or postoperative Bohler angle between the 2 groups. The mean preoperative Bohler angle was significantly low for group 1. Although not significantly different, the mean American Orthopaedic Foot and Ankle Society and Maryland scores were lower for group 1 (81.9 and 84.3) than group 2 (87.8 and 92.0), and the median subtalar arthritis grade was greater for group 1 (score 2) than for group 2 (score 1.5). The worse results with C line fracture patterns despite satisfactory reduction might result from sinus tarsi artery damage. Angiographic investigations could clarify this theory in the future. Consequently, surgeons must inform and should hesitate to operate on patients with these highly comminuted C line calcaneus fractures. Copyright © 2011 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All

  18. A GAL4-Driver Line Resource for Drosophila Neurobiology

    Directory of Open Access Journals (Sweden)

    Arnim Jenett

    2012-10-01

    Full Text Available We established a collection of 7,000 transgenic lines of Drosophila melanogaster. Expression of GAL4 in each line is controlled by a different, defined fragment of genomic DNA that serves as a transcriptional enhancer. We used confocal microscopy of dissected nervous systems to determine the expression patterns driven by each fragment in the adult brain and ventral nerve cord. We present image data on 6,650 lines. Using both manual and machine-assisted annotation, we describe the expression patterns in the most useful lines. We illustrate the utility of these data for identifying novel neuronal cell types, revealing brain asymmetry, and describing the nature and extent of neuronal shape stereotypy. The GAL4 lines allow expression of exogenous genes in distinct, small subsets of the adult nervous system. The set of DNA fragments, each driving a documented expression pattern, will facilitate the generation of additional constructs for manipulating neuronal function.

  19. Pattern Recognition by Retina-Like Devices.

    Science.gov (United States)

    Weiman, Carl F. R.; Rothstein, Jerome

    This study has investigated some pattern recognition capabilities of devices consisting of arrays of cooperating elements acting in parallel. The problem of recognizing straight lines in general position on the quadratic lattice has been completely solved by applying parallel acting algorithms to a special code for lines on the lattice. The…

  20. Root patterning

    NARCIS (Netherlands)

    Scheres, Ben; Laskowski, Marta

    2016-01-01

    The mechanisms that pattern lateral root primordial are essential for the elaboration of root system architecture, a trait of key importance for future crop breeding. But which are most important: periodic or local cues? In this issue of Journal of Experimental Botany (pages 1411-1420), Kircher

  1. Finding Patterns

    Science.gov (United States)

    Mulvey, Bridget

    2016-01-01

    Students best learn science through a combination of science inquiry and language learning. This article presents a series of chemistry lessons on the naming of compounds. The weeklong unit focuses on patterns across compound names and chemical formulas and addresses several of the "Next Generation Science Standards" (NGSS Lead States…

  2. Granular patterns

    CERN Document Server

    Aranson, Igor S

    2009-01-01

    This title presents a review of experiments and novel theoretical concepts needed to understand the mechanisms of pattern formation in granular materials. An effort is made to connect concepts and ideas developed in granular physics with new emergent fields, especially in biology, such as cytoskeleton dynamics.

  3. Glue-paste linings

    DEFF Research Database (Denmark)

    Fuster-López, Laura; Andersen, Cecil Krarup; Bouillon, Nicolas

    2017-01-01

    processes of lined canvas paintings. The impact of cyclic relative humidity on the biological and physical stability of the laminate structure is reported. Carefully constructed mock-ups, simulating lined canvas paintings, were used to examine the effect of pest infestation, mould growth, mechanical damage...

  4. Minnesota County Boundaries - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — Minnesota county boundaries derived from a combination of 1:24,000 scale PLS lines, 1:100,000 scale TIGER, 1:100,000 scale DLG, and 1:24,000 scale hydrography lines....

  5. Patterns and clinical outcomes of lithium treatment

    NARCIS (Netherlands)

    Wilting, I.

    2008-01-01

    Patterns and consequences of lithium use’. In chapter 2.1 we studied lithium use patterns in out-patients within the last decade. In line with the increase in alternatives and the Dutch guidelines, we observed an increase in use of atypical antipsychotics and valproic acid and a decrease in use

  6. Air-induced inverse Chladni patterns

    NARCIS (Netherlands)

    van Gerner, H.J.; van der Weele, J.P.; van der Hoef, Martin Anton; van der Meer, Roger M.

    2011-01-01

    When very light particles are sprinkled on a resonating horizontal plate, inverse Chladni patterns are formed. Instead of going to the nodal lines of the plate, where they would form a standard Chladni pattern, the particles are dragged to the antinodes by the air currents induced by the vibration

  7. Cell line provenance.

    Science.gov (United States)

    Freshney, R Ian

    2002-07-01

    Cultured cell lines have become an extremely valuable resource, both in academic research and in industrial biotechnology. However, their value is frequently compromised by misidentification and undetected microbial contamination. As detailed elsewhere in this volume, the technology, both simple and sophisticated, is available to remedy the problems of misidentification and contamination, given the will to apply it. Combined with proper records of the origin and history of the cell line, assays for authentication and contamination contribute to the provenance of the cell line. Detailed records should start from the initiation or receipt of the cell line, and should incorporate data on the donor as well as the tissue from which the cell line was derived, should continue with details of maintenance, and include any accidental as well as deliberate deviations from normal maintenance. Records should also contain details of authentication and regular checks for contamination. With this information, preferably stored in a database, and suitable backed up, the provenance of the cell line so created makes the cell line a much more valuable resource, fit for validation in industrial applications and more likely to provide reproducible experimental results when disseminated for research in other laboratories.

  8. Proof patterns

    CERN Document Server

    Joshi, Mark

    2015-01-01

    This innovative textbook introduces a new pattern-based approach to learning proof methods in the mathematical sciences. Readers will discover techniques that will enable them to learn new proofs across different areas of pure mathematics with ease. The patterns in proofs from diverse fields such as algebra, analysis, topology and number theory are explored. Specific topics examined include game theory, combinatorics, and Euclidean geometry, enabling a broad familiarity. The author, an experienced lecturer and researcher renowned for his innovative view and intuitive style, illuminates a wide range of techniques and examples from duplicating the cube to triangulating polygons to the infinitude of primes to the fundamental theorem of algebra. Intended as a companion for undergraduate students, this text is an essential addition to every aspiring mathematician’s toolkit.

  9. Pattern classification

    CERN Document Server

    Duda, Richard O; Stork, David G

    2001-01-01

    The first edition, published in 1973, has become a classic reference in the field. Now with the second edition, readers will find information on key new topics such as neural networks and statistical pattern recognition, the theory of machine learning, and the theory of invariances. Also included are worked examples, comparisons between different methods, extensive graphics, expanded exercises and computer project topics. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

  10. A Corn Tissue Culture Cell Line with Altered Lipid Metabolism

    OpenAIRE

    Yue-ie C, Hsing; Jack M, Widholm; Robert W, Rinne; Institute of Botany, Academia Sinica; Department of Agronomy, University of Illinois at Urbana; Plant Physiology and Genetics Research Unit, Department of Agriculture, Agricultural Research Service and Department of Agronomy, University of Illinois at Urbana

    1991-01-01

    A variant corn callus line derived from callus which originated from etiolated leaves of Illinois High Oil corn (Zea mays L.) has been identified. The variant corn callus line had increased lipid content concomitant with increased acetyl-CoA carboxylase activity and altered biotin-containing protein patterns relative to the wild type callus. The variant callus line also had altered fatty acid composition concomitant with decreased oleate desaturase activity compared to the wild type callus. T...

  11. Wood pole overhead lines

    CERN Document Server

    Wareing, Brian

    2005-01-01

    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  12. The Linux command line a complete introduction

    CERN Document Server

    Shotts, William E

    2012-01-01

    You've experienced the shiny, point-and-click surface of your Linux computer—now dive below and explore its depths with the power of the command line. The Linux Command Line takes you from your very first terminal keystrokes to writing full programs in Bash, the most popular Linux shell. Along the way you'll learn the timeless skills handed down by generations of gray-bearded, mouse-shunning gurus: file navigation, environment configuration, command chaining, pattern matching with regular expressions, and more.

  13. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  14. Illustrating the Euler Line.

    Science.gov (United States)

    Rubillo, James M.

    1987-01-01

    Euler's discovery about the centroid of a triangle trisecting the line segment joining its circumference to its orthocenter is discussed. An activity that will help students review fundamental concepts is included. (MNS)

  15. Kansas Electric Transmission Lines

    Data.gov (United States)

    Kansas Data Access and Support Center — This data set is a digital representation of the EletcircTransmission lines for the State of Kansas as maintained by the Kansas Corporation Commission. Data is...

  16. Veterans Crisis Line

    Data.gov (United States)

    Department of Veterans Affairs — The caring responders at the Veterans Crisis Line are specially trained and experienced in helping Veterans of all ages and circumstances. Some of the responders are...

  17. Electric Power Transmission Lines

    Data.gov (United States)

    Department of Homeland Security — Transmission Lines are the system of structures, wires, insulators and associated hardware that carry electric energy from one point to another in an electric power...

  18. Nasca Lines, Peru

    Science.gov (United States)

    2001-01-01

    The Nasca Lines are located in the Pampa region of Peru, the desolate plain of the Peruvian coast 400 km south of Lima. The Lines were first spotted when commercial airlines began flying across the Peruvian desert in the 1920's. Passengers reported seeing 'primitive landing strips' on the ground below. The Lines were made by removing the iron-oxide coated pebbles which cover the surface of the desert. When the gravel is removed, they contrast with the light color underneath. In this way the lines were drawn as furrows of a lighter color. On the pampa, south of the Nasca Lines, archaeologists have now uncovered the lost city of the line-builders, Cahuachi. It was built nearly two thousand years ago and was mysteriously abandoned 500 years later. This ASTER sub-image covers an area of 14 x 18 km, was acquired on December 22, 2000, and is located at 14.7 degrees south latitude and 75.1 degrees west longitude. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  19. Aplasia cutis congenita reminiscent of the lines of Blaschko

    NARCIS (Netherlands)

    Hennekam, R. C.

    1992-01-01

    A male newborn showing congenital symmetrical abdominal skin defects and an alopecia on the scalp following a spiral pattern is described. The pattern of distribution of both skin anomalies was reminiscent of the lines of Blaschko, indicating that somatic mosaicism is the most probable cause for the

  20. Malaysian meteoric water line

    International Nuclear Information System (INIS)

    Md Shahid Ayub

    2006-01-01

    The quest for Malaysian meteoric water line began in 1981 when environmental isotope hydrology was introduced. In the 1980, and with the establishment of three stations at Pengkalan Chepa, Kepala Batas and Kuah, the Malaysian Meteoric Water Line acquired then was δD = 8δ 18 O + 12.68. With the addition of another four stations, by the end of 1990s, the Malaysian Meteoric Water Line for the decade was established as δD = 8 δ 18 O + 11.76. Taking the overall result between 1980 and mid 2000s the Malaysian Meteoric Water Line was established as δD = 8 δ 18 O + 13.255 and the weighted mean precipitation is (-7.64, -46.74). In establishing this meteoric water line it was observed that the higher altitude station manifested poorer stable isotopes content as compared to lower altitude station. It was also observed that as the amount of rain increased, the stable isotopes content would decrease and vice versa. The effect is reversed when the amount is due to monsoon rains and tropical storms. (Author)

  1. Factored Facade Acquisition using Symmetric Line Arrangements

    KAUST Repository

    Ceylan, Duygu

    2012-05-01

    We introduce a novel framework for image-based 3D reconstruction of urban buildings based on symmetry priors. Starting from image-level edges, we generate a sparse and approximate set of consistent 3D lines. These lines are then used to simultaneously detect symmetric line arrangements while refining the estimated 3D model. Operating both on 2D image data and intermediate 3D feature representations, we perform iterative feature consolidation and effective outlier pruning, thus eliminating reconstruction artifacts arising from ambiguous or wrong stereo matches. We exploit non-local coherence of symmetric elements to generate precise model reconstructions, even in the presence of a significant amount of outlier image-edges arising from reflections, shadows, outlier objects, etc. We evaluate our algorithm on several challenging test scenarios, both synthetic and real. Beyond reconstruction, the extracted symmetry patterns are useful towards interactive and intuitive model manipulations.

  2. Sprayed concrete linings

    Energy Technology Data Exchange (ETDEWEB)

    Hindle, D.

    1999-12-01

    Sprayed concrete, or shotcrete, was invented in the 1920s for preserving dinosaur skeletons and was used underground initially in coalmines for the preservation and fine proofing of timber supports. Its use as a support lining in rock tunnelling was developed in the 1950s and 60s. The article surveys equipment available from major manufacturers and suppliers of concrete spraying equipment (Aliva, Cifa, GIA, Industri, Ingersoll Rand, etc.), specialist cement and additive manufacturers (Castle, Cement, Moria Carbotech). manufacturers of lattice girders and fibre reinforcement, and manufacturers of instrumentation for tunnel linings. 5 tabs., 9 photos.

  3. Female pattern hair loss

    Directory of Open Access Journals (Sweden)

    Archana Singal

    2013-01-01

    Full Text Available Female pattern hair loss (FPHL is a common cause of hair loss in women characterized by diffuse reduction in hair density over the crown and frontal scalp with retention of the frontal hairline. Its prevalence increases with advancing age and is associated with significant psychological morbidity. The pathophysiology of FPHL is still not completely understood and seems to be multifactorial. Although androgens have been implicated, the involvement of androgen-independent mechanisms is evident from frequent lack of clinical or biochemical markers of hyperandrogenism in affected women. The role of genetic polymorphisms involving the androgen and estrogen receptors is being increasingly recognized in its causation and predicting treatment response to anti-androgens. There are different clinical patterns and classifications of FPHL, knowledge of which facilitates patient management and research. Chronic telogen effluvium remains as the most important differential diagnosis. Thorough history, clinical examination, and evaluation are essential to confirm diagnosis. Patients with clinical signs of androgen excess require assessment of biochemical parameters and imaging studies. It is prudent to screen the patients for metabolic syndrome and cardiovascular risk factors. The treatment comprises medical and/or surgical modalities. Medical treatment should be initiated early as it effectively arrests hair loss progression rather than stimulating regrowth. Minoxidil continues to be the first line therapy whereas anti-androgens form the second line of treatment. The progressive nature of FPHL mandates long-term treatment for sustained effect. Medical therapy may be supplemented with cosmetic concealment in those desirous of greater hair density. Surgery may be worthwhile in some carefully selected patients.

  4. Bike Map Lines

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — Chapel Hill Bike Map Lines from KMZ file.This data came from the wiki comment board for the public, not an “official map” showing the Town of Chapel Hill's plans or...

  5. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  6. Defining line replaceable units

    NARCIS (Netherlands)

    Parada Puig, J.E.; Basten, Robertus Johannes Ida

    2015-01-01

    Defective capital assets may be quickly restored to their operational condition by replacing the item that has failed. The item that is replaced is called the Line Replaceable Unit (LRU), and the so-called LRU definition problem is the problem of deciding on which item to replace upon each type of

  7. America's Assembly Line

    DEFF Research Database (Denmark)

    Nye, David Edwin

    A social history of the assembly line, invented in 1913. Both praised as a boon to consumers and as a curse for workers, it has been satirized, imitated, and celebrated for 100 years. It has inspired fiction, comedy, cafeteria layouts, and suburban housing. It transformed industrial labor...

  8. Developing Green Line Products

    DEFF Research Database (Denmark)

    Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

    2011-01-01

    This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

  9. Drawing the Line

    DEFF Research Database (Denmark)

    Holm, Isak Winkel

    2016-01-01

    of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...

  10. LEAR: antiproton extraction lines

    CERN Multimedia

    Photographic Service

    1992-01-01

    Antiprotons, decelerated in LEAR to a momentum of 100 MeV/c (kinetic energy of 5.3 MeV), were delivered to the experiments in an "Ultra-Slow Extraction", dispensing some 1E9 antiprotons over times counted in hours. Beam-splitters and a multitude of beam-lines allowed several users to be supplied simultaneously.

  11. K-line photometry

    International Nuclear Information System (INIS)

    Henry, R.C.

    1979-01-01

    A brief review is given of more than a decade of work involving measurement of the strength of the K line of calcium in A-type stars. The effects of interstellar reddening are reexamined, and an improved estimate for the range in calcium abundance among field stars is obtained. (Auth.)

  12. Subjective poverty line definitions

    NARCIS (Netherlands)

    J. Flik; B.M.S. van Praag (Bernard)

    1991-01-01

    textabstractIn this paper we will deal with definitions of subjective poverty lines. To measure a poverty threshold value in terms of household income, which separates the poor from the non-poor, we take into account the opinions of all people in society. Three subjective methods will be discussed

  13. Clamp Restrains Pressure Line

    Science.gov (United States)

    Aliberti, J. A.

    1982-01-01

    Safety restraint protects people and property if a high-pressure fitting fails. As long as pressure line remains attached at the fitting, clamp exerts essentially no force on hose. If fitting fails, force of fluid leaving free end of hose causes the cam on the clamp to compress hose with a positive locking action.

  14. On-line and off-line assessment of metacognition

    Directory of Open Access Journals (Sweden)

    Seda Saraç

    2012-03-01

    Full Text Available he study investigates the interrelationships between different on-line and off-line measures for assessing metacognition. The participants were 47 fifth grade elementary students. Metacognition was assessed through two off-line and two on-line measures. The off-line measures consisted of a teacher rating scale and a self-report questionnaire. The on-line measures were thinking aloud protocols and accuracy ratings of text comprehension. The results showed positive significant correlation between data from two off-line measures and negative significant correlation between data from two on-line measures. The off-line metacognitive measures had non-significant correlations with all on-line measures. Principal Component Analysis, performed on four metacognitive measures, yielded a two-factor solution and this two-factor solution accounted for 71.5 % of the sample variance. The data from two off-line measures loaded on the first component with a variance proportion of 38.6 % and the data from two on-line measures loaded on the second component with a variance proportion of 32.9%. The findings of the study showed that metacognitive processes form a complex structure that needs to be assessed using various methods. However, in the multi-method studies, using on-line and off-line measures together will be appropriate rather than using only on-line measures or only off-line measures.

  15. An OCD perspective of line edge and line width roughness metrology

    Science.gov (United States)

    Bonam, Ravi; Muthinti, Raja; Breton, Mary; Liu, Chi-Chun; Sieg, Stuart; Seshadri, Indira; Saulnier, Nicole; Shearer, Jeffrey; Patlolla, Raghuveer; Huang, Huai

    2017-03-01

    Metrology of nanoscale patterns poses multiple challenges that range from measurement noise, metrology errors, probe size etc. Optical Metrology has gained a lot of significance in the semiconductor industry due to its fast turn around and reliable accuracy, particularly to monitor in-line process variations. Apart from monitoring critical dimension, thickness of films, there are multiple parameters that can be extracted from Optical Metrology models3. Sidewall angles, material compositions etc., can also be modeled to acceptable accuracy. Line edge and Line Width roughness are much sought of metrology following critical dimension and its uniformity, although there has not been much development in them with optical metrology. Scanning Electron Microscopy is still used as a standard metrology technique for assessment of Line Edge and Line Width roughness. In this work we present an assessment of Optical Metrology and its ability to model roughness from a set of structures with intentional jogs to simulate both Line edge and Line width roughness at multiple amplitudes and frequencies. We also present multiple models to represent roughness and extract relevant parameters from Optical metrology. Another critical aspect of optical metrology setup is correlation of measurement to a complementary technique to calibrate models. In this work, we also present comparison of roughness parameters extracted and measured with variation of image processing conditions on a commercially available CD-SEM tool.

  16. Characterization of selection effects on broiler lines using DNA fingerprinting

    Directory of Open Access Journals (Sweden)

    GS Schmidt

    2003-05-01

    Full Text Available The objective of this study was to evaluate the effect of selection for body weight on the genetic variability and diversity in broiler lines. Two paternal broiler lines (LL and LLc were used. LL line was selected for 12 generations for growth and carcass and reproduction characteristics. The LLc line was established from LL line in 1985 and mated at random. Blood samples from six chickens per line were collected and used for molecular analysis. Also, a DNA pool was made for each line to compare effects between lines. Data were analyzed considering the collected information on the presence or absence of DNA bands. Band sharing scores were calculated using the DICE coefficient. The pattern of the 21 most representative bands was used. DNA fingerprinting (DFP showed 90.48 % of polymorphism bands for both lines. Difference between lines was not due to the presence or absence of bands, but to the frequency of such bands in each genotype. Considering that both lines had the same genetic background, changes on band frequency were probably due to selection. Selection for body weight had an effect on the band frequency as evaluated by DFP, and for this reason this technique could be used as a tool in the selection process. Results also suggest that bands 4, 5 and 19 were linked to body weight traits, and bands 9, 10, 12, 13 and 21 were linked to reproductive traits such as egg production.

  17. Multiple Lines of Evidence

    Energy Technology Data Exchange (ETDEWEB)

    Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Venzin, Alexander M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bramer, Lisa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-06-03

    This paper discusses the process of identifying factors that influence the contamination level of a given decision area and then determining the likelihood that the area remains unacceptable. This process is referred to as lines of evidence. These lines of evidence then serve as inputs for the stratified compliance sampling (SCS) method, which requires a decision area to be divided into strata based upon contamination expectations. This is done in order to focus sampling efforts more within stratum where contamination is more likely and to use the domain knowledge about these likelihoods of the stratum remaining unacceptable to buy down the number of samples necessary, if possible. Two different building scenarios were considered as an example (see Table 3.1). SME expertise was elicited concerning four lines of evidence factors (see Table 3.2): 1) amount of contamination that was seen before decontamination, 2) post-decontamination air sampling information, 3) the applied decontaminant information, and 4) the surface material. Statistical experimental design and logistic regression modelling were used to help determine the likelihood that example stratum remained unacceptable for a given example scenario. The number of samples necessary for clearance was calculated by applying the SCS method to the example scenario, using the estimated likelihood of each stratum remaining unacceptable as was determined using the lines of evidence approach. The commonly used simple random sampling (SRS) method was also used to calculate the number of samples necessary for clearance for comparison purposes. The lines of evidence with SCS approach resulted in a 19% to 43% reduction in total number of samples necessary for clearance (see Table 3.6). The reduction depended upon the building scenario, as well as the level of percent clean criteria. A sensitivity analysis was also performed showing how changing the estimated likelihoods of stratum remaining unacceptable affect the number

  18. Draw the Line!

    DEFF Research Database (Denmark)

    Draw the Line! International Conference, Copenhagen 2008 Papers, proceedings and recommendations is the second publication of the international three year long project "Understanding Puzzles in the Gendered European Map" (UPGEM), which is financed by the European Commission. In this publication we...... present proceedings from the UPGEM conference "Draw the Line!" in Copenhagen May 2008. The proceedings include contributions by UPGEM researchers, conference speeches by other researchers, politicians and gender equality officers in which they relate their work and research with the research done in UPGEM....... The UPGEM research has previously been published in national reports from each of the partner countries (Denmark, Estonia, Finland, Italy and Poland). In these individual national reports of universities as workplaces for male and female researchers we discuss scientific cultures in physics embedded...

  19. Adaptive method of lines

    CERN Document Server

    Saucez, Ph

    2001-01-01

    The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

  20. CRUCIBLE LINING METHOD

    Science.gov (United States)

    Bone, W.H.; Schmidt, W.W.

    1958-11-01

    A method is presented for forming refractory liners in cylindrical reaction vessels used for the reductlon of uranium tetrafluoride to metallic uranium. A preliminary form, having positioning lugs attached thereto, is inserted into the reaction vessel and the refractory powder, usually CaO, is put in the annular space between the form and the inner wall of the reaction vessel. A jolting table is used to compact this charge of liner material ln place, and after thls has been done, the preliminary form is removed and the flnal form or plug is lnserted without disturbing the partially completed lining. The remainder of the lining charge is then introduced and compacted by jolting, after which the form is removed.

  1. Remote mechanical C line

    International Nuclear Information System (INIS)

    Nuttall, K.R.; Gardner, P.R.

    1991-01-01

    Westinghouse Hanford Company is developing a desk-top simulation based training program on the operation of the Remote Mechanical C (RMC) Line process in the Plutonium Finishing Plant on the Hanford site, Richland, Washington. Simulations display aod contioually update current values of system parameters on computer graphics of RMC line equipment. Students are able to operate a variety of controllers to maintain proper system status. Programmed faults, selectable by the course instructor, can be used to test student responses to off-normal events. Prior to operation of the simulation, students are given computer-based tutorials on the function, processes, operation, and error conditions associated with individual components. By including the capability of operating each individual component - valves, heaters, agitators, etc. - the computer-based training (CBT) lessons become an interactive training manual. From one perspective RMC represents one step in the diffusion of the well-known and well-documented simulator training activities for nuclear reactor operators to other training programs, equally critical, perhaps, but less well scrutinized in the past. Because of the slowly responding nature of the actual process, RMC can retain many of the capabilities of practice and testing in a simulated work environment while avoiding the cost of a full scale simulator and the exposure and waste developed by practice runs of the RMC line. From another perspective RMC suggests training advances even beyond the most faithful simulators. For example, by integrating CBT lessons with the simulation, RMC permits students to focus in on specific processes occurring inside chosen components. In effect, the interactive training manual is available on-line with the simulation itself. Cost are also discussed

  2. Stitch and hem and line and flight

    Science.gov (United States)

    Thorp, John Daniel

    contain is a love song with a one-note melody, no instrumentation and no meter. A love song so long as a love song marks a missing person. Each paragraph is composed from a number of radiating lines that cross and pattern as sound, as image, and as a content. Lines that, when they intersect, are triangulating the assemblage of a proliferating and shifting continent. So a line of text might contain narcotics, a desert, a(nti)theism or grass or a curtain, a child, things that no longer fly, a tower: a line can be what it says, a line can be an idea had or put down. And a line can be a stripe of letters all standing on their feet, sharing a baselines across the page; or a pen dragged across paper: a line can be an image, or part of making one. And when spelled or sounded, a line is a person's name, how that person came to that name and how that name emits or omits itself as a word from a landscape that a person is unwilling to inhabit. A line like this is an escape route that won't lead to any havens, but will hide a body.

  3. K-Line Patterns’ Predictive Power Analysis Using the Methods of Similarity Match and Clustering

    Directory of Open Access Journals (Sweden)

    Lv Tao

    2017-01-01

    Full Text Available Stock price prediction based on K-line patterns is the essence of candlestick technical analysis. However, there are some disputes on whether the K-line patterns have predictive power in academia. To help resolve the debate, this paper uses the data mining methods of pattern recognition, pattern clustering, and pattern knowledge mining to research the predictive power of K-line patterns. The similarity match model and nearest neighbor-clustering algorithm are proposed for solving the problem of similarity match and clustering of K-line series, respectively. The experiment includes testing the predictive power of the Three Inside Up pattern and Three Inside Down pattern with the testing dataset of the K-line series data of Shanghai 180 index component stocks over the latest 10 years. Experimental results show that (1 the predictive power of a pattern varies a great deal for different shapes and (2 each of the existing K-line patterns requires further classification based on the shape feature for improving the prediction performance.

  4. Hydrogen Stark Broadened Brackett lines

    Directory of Open Access Journals (Sweden)

    C. Stehlé

    2010-01-01

    Full Text Available Stark-broadened lines of the hydrogen Brackett series are computed for the conditions of stellar atmospheres and circumstellar envelopes. The computation is performed within the Model Microfield Method, which includes the ion dynamic effects and makes the bridge between the impact limit at low density and the static limit at high density and in the line wings. The computation gives the area normalized line shape, from the line core up to the static line wings.

  5. Line managers as marketers.

    Science.gov (United States)

    Rynne, T J

    1986-09-01

    Many hospital administrators and boards of directors, having overcome their initial opposition to advertising and hired a marketing professional, are wondering why their marketing programs have not accomplished all that they had hoped. The answer lies in their perception of who is responsible for marketing. Marketing is not a specialty separate from the disciplines of management--it is a basic management skill. Its goal is to satisfy the customer by providing products and services that meet the customer's needs, wants, and preferences. Line managers must understand the hospital's customers and make the critical day-to-day differences in satisfying them. They are the hospital's front-line marketers, and the marketing department's role is to support them in this function. The marketing department should develop the line managers' marketing skills by furnishing them with the appropriate tools: formats, models, examples, and instructions. In addition, the marketing staff should provide such specialized services as marketing research, ad agency management, and development of communications.

  6. Magnonic Crystal as a Delay Line for Low-Noise Auto-Oscillator

    Science.gov (United States)

    2015-05-12

    Magnonic crystal as a delay line for low-noise auto-oscillator Elena Bankowski and Thomas Meitzler U.S. Army TARDEC, Warren, Michigan 48397, USA...authors propose to use the magnonic crystal patterned on the YIG magnetic film as an efficient delay line in the feedback loop of tunable auto-oscillator...increasing the thickness of such delay line as compare to the YIG film with no pattern. In turn, use of this magnonic crystal opens a way to improve

  7. Pattern recognition principles

    Science.gov (United States)

    Tou, J. T.; Gonzalez, R. C.

    1974-01-01

    The present work gives an account of basic principles and available techniques for the analysis and design of pattern processing and recognition systems. Areas covered include decision functions, pattern classification by distance functions, pattern classification by likelihood functions, the perceptron and the potential function approaches to trainable pattern classifiers, statistical approach to trainable classifiers, pattern preprocessing and feature selection, and syntactic pattern recognition.

  8. Antioxidant enzymes in the needles of different omorika lines

    Directory of Open Access Journals (Sweden)

    Bogdanović Jelena

    2005-01-01

    Full Text Available Picea omorika (Panč Purkyně (Serbian spruce is a Balkan endemic coniferous species. We studied soluble peroxidase, catalase, polyphenol oxidase, and superoxide-dismutase activity in the needles of five omorika lines grown in a generative seed orchard. The peroxidase and polyphenol oxidase isoenzyme patterns were also investigated. Activity of the studied enzymes varied among different lines. The highest activity of peroxidase, catalase and polyphenol oxidase was found in the A3 ("borealis" and B5 ("semidichotomous" lines. Four acidic and two basic peroxidase isoenzymes and one polyphenol oxidase isoenzyme were detected. There was no variation in either the peroxidase or the polyphenol oxidase isoenzyme pattern among the different lines.

  9. Excitation and Characterization of Chladni Plate Patterns

    Science.gov (United States)

    Bourke, Shannon; Behringer, Ernest

    2011-04-01

    When a thin metal plate with a small amount of sand on it is made to vibrate, aesthetically pleasing sand patterns can form along the nodal lines of the plate. These symmetric patterns are called Chladni Patterns. Students taking PHY 101 Physical Science in the Arts at Eastern Michigan University create these patterns by pulling a violin bow across the edge of a plate, or by using a mechanical oscillator to drive the center of a plate. These two methods only allow a small subset of all possible points on the plate to be excited. We designed and built an electronic device that allows its user to excite the plate at any point. We present patterns created with this electronic device and other methods, and describe ways to model the observed patterns.

  10. Gadolinium-153 line sources

    Energy Technology Data Exchange (ETDEWEB)

    Lebedev, V.M. E-mail: kar@orip.niiar.simbirsk.su; Gordeev, J.N.; Karelin, E.A.; Gavrilov, V.D

    2000-11-15

    The technology for Gd-153 line source production has been developed at SSC RIAR. The source active core is made of Al-Gd{sub 2}O{sub 3} composition by means of one of the following ways: either collecting pressed pellets or filling the source body with the composition followed by sintering. The composition is prepared by gadolinium salt thermal destruction on aluminium particles. The method allows setting gadolinium mass fraction (from 0.02 to 6%) with high accuracy and uniformity of distribution in the composition volume of more than 95%.

  11. α-line systematics

    International Nuclear Information System (INIS)

    Caurier, E.; Zuker, A.P.

    1991-01-01

    A study of the α-line, defined as a set of differences (D α ) characterized binding energies of (N,Z) nuclei, is presented. The 2p2n-separation energies for even-even nuclei, odd-odd nuclei, even(Z)-odd(N) nuclei, odd(Z)-even(N) nuclei are presented. Trends and details in even-even nuclei, magic numbers of even-even and odd-odd nuclei are discussed. (G.P.) 1 ref.; 8 figs

  12. America's Assembly Line

    DEFF Research Database (Denmark)

    Nye, David Edwin

    A social history of the assembly line, invented in 1913. Both praised as a boon to consumers and as a curse for workers, it has been satirized, imitated, and celebrated for 100 years. It has inspired fiction, comedy, cafeteria layouts, and suburban housing. It transformed industrial labor...... and provoked strikes and union drives in the 1930s, but became a symbol of victory in the Second World War and Cold War. Reinvented by Japan as "lean production" and then increasingly automated after 1990, it remains a cornerstone of production but no longer employs many workers, even as it evolves toward...

  13. Worldlines as Wilson Lines

    Energy Technology Data Exchange (ETDEWEB)

    Green, Daniel; /SLAC /Stanford U., Dept. Phys.

    2008-04-29

    Gravitational theories do not admit gauge invariant local operators. We study the limits under which there exists a quasi-local description for a class of non-local gravitational observables where a sum over worldlines plays the role of the Wilson line for gauge theory observables. We study non-local corrections to the local description and circumstances where these corrections become large. We find that these operators are quasi-local in at space and AdS, but fail to be quasi-local in de Sitter space.

  14. Coaxial transmission line - Equalization

    International Nuclear Information System (INIS)

    Bonnerue, J.L.; Fremont, Jacques; Haubtmann, Jack; Pillon, Gerard.

    1981-09-01

    The transmission of electrical signal through a coaxial line is not perfect and signal distortions are increased as much as the frequency spectrum is extended. We have designed and achieved passive filters (named equalizers) with transfer functions which are inverse of coaxial transfer functions. Doing so our attempt is to avoid definitive loss of information in the recorded data. The main feature of our equalization method lies in the fact it could be either an electrical or a numerical correction or both of them. Some examples in the use of this technique are also proposed [fr

  15. Antioxidant enzymes in the needles of different omorika lines

    OpenAIRE

    Bogdanović Jelena; Dučić Tanja M.; Milosavić Nenad B.; Vujčić Z.; Šijačić Mirjana; Isajev Vasilije; Radotić Ksenija

    2005-01-01

    Picea omorika (Panč) Purkyně (Serbian spruce) is a Balkan endemic coniferous species. We studied soluble peroxidase, catalase, polyphenol oxidase, and superoxide-dismutase activity in the needles of five omorika lines grown in a generative seed orchard. The peroxidase and polyphenol oxidase isoenzyme patterns were also investigated. Activity of the studied enzymes varied among different lines. The highest activity of peroxidase, catalase and polyphenol oxidase was found in the A3 ("borealis")...

  16. From Off-line to On-line Handwriting Recognition

    NARCIS (Netherlands)

    Lallican, P.; Viard-Gaudin, C.; Knerr, S.

    2004-01-01

    On-line handwriting includes more information on time order of the writing signal and on the dynamics of the writing process than off-line handwriting. Therefore, on-line recognition systems achieve higher recognition rates. This can be concluded from results reported in the literature, and has been

  17. Strategic production line synchronisation

    Directory of Open Access Journals (Sweden)

    Hattingh, Teresa

    2016-08-01

    Full Text Available A study was conducted at the sole global producer of suspension struts for a particular vehicle manufacturer. This supplier is currently able to meet customer demand. However, it does so because of a large finished goods and work-in-progress (WIP inventory. The plant operates two production processes that are separated by a large buffer of WIP, which essentially decouples the production processes. This study aimed to reduce this WIP buffer; this would require the processes to become synchronised, bearing in mind that the reliability of delivery should not decrease. A tool that considers time, quality, and machine capacity was developed to assess the impact of line synchronisation on company performance figures. It was found that line synchronisation produced several benefits for the supplier, including batch size reduction, lower inventory levels, and associated shorter lead times. This further allowed the supplier to improve flow in the plant by introducing a pull system. Improved visual oversight could lead to further improved problem-solving and innovation.

  18. Microdroplet evaporation with a forced pinned contact line.

    Science.gov (United States)

    Gleason, Kevin; Putnam, Shawn A

    2014-09-02

    Experimental and numerical investigations of water microdroplet evaporation on heated, laser patterned polymer substrates are reported. The study is focused on both (i) controlling a droplet's contact line dynamics during evaporation to identifying how the contact line influences evaporative heat transfer and (ii) validating numerical simulations with experimental data. Droplets are formed on the polymer surface using a bottom-up methodology, where a computer-controlled syringe pump feeds water through a 200 μm diameter fluid channel within the heated polymer substrate. This methodology facilitates precise control of the droplet's growth rate, size, and inlet temperature. In addition to this microchannel supply line, the substrate surfaces are laser patterned with a moatlike trench around the fluid-channel outlet, adding additional control of the droplet's contact line motion, area, and contact angle. In comparison to evaporation on a nonpatterned polymer surface, the laser patterned trench increases contact line pinning time by ∼60% of the droplet's lifetime. Numerical simulations of diffusion controlled evaporation are compared the experimental data with a pinned contact line. These diffusion based simulations consistently over predict the droplet's evaporation rate. In efforts to improve this model, a temperature distribution along the droplet's liquid-vapor interface is imposed to account for the concentration distribution of saturated vapor along the interface, which yields improved predictions within 2-4% of the experimental data throughout the droplet's lifetime on heated substrates.

  19. Product Line Practice Workshop Report

    National Research Council Canada - National Science Library

    Bass, Len

    1997-01-01

    The first Software Engineering Institute Product Line Practice Workshop was a hands-on meeting held in December 1996 to share industry and government practices in software product lines and to explore...

  20. Privacy transparency patterns

    NARCIS (Netherlands)

    Siljee B.I.J.

    2015-01-01

    This paper describes two privacy patterns for creating privacy transparency: the Personal Data Table pattern and the Privacy Policy Icons pattern, as well as a full overview of privacy transparency patterns. It is a first step in creating a full set of privacy design patterns, which will aid

  1. Reduction of the electromagnetic radiation in high tension lines

    International Nuclear Information System (INIS)

    Araya Padilla, Eddie A.

    2006-01-01

    Introduces like the design of the transmission lines determine the profile of the electric and magnetic generated field. This profile is calculated with the use of the equations of Maxwell, and it depends rely on diverse geometries and operative factors of the line, so that an adequate physical distribution of the tower configuration, it could diminish the intensity of radiation generated inside of and in the border of right of way of the line. Pattern like the electric and magnetic generated fields are distributed satisfactorily, by means of the analysis of sensibility of parameters of design. (author) [es

  2. CLO : The cell line ontology

    NARCIS (Netherlands)

    Sarntivijai, Sirarat; Lin, Yu; Xiang, Zuoshuang; Meehan, Terrence F.; Diehl, Alexander D.; Vempati, Uma D.; Schuerer, Stephan C.; Pang, Chao; Malone, James; Parkinson, Helen; Liu, Yue; Takatsuki, Terue; Saijo, Kaoru; Masuya, Hiroshi; Nakamura, Yukio; Brush, Matthew H.; Haendel, Melissa A.; Zheng, Jie; Stoeckert, Christian J.; Peters, Bjoern; Mungall, Christopher J.; Carey, Thomas E.; States, David J.; Athey, Brian D.; He, Yongqun

    2014-01-01

    Background: Cell lines have been widely used in biomedical research. The community-based Cell Line Ontology (CLO) is a member of the OBO Foundry library that covers the domain of cell lines. Since its publication two years ago, significant updates have been made, including new groups joining the CLO

  3. Transverse--Harris--lines in a skeletal population from the 1711 Danish plague site

    DEFF Research Database (Denmark)

    Fiscella, Gabriela N; Bennike, Pia; Lynnerup, Niels

    2008-01-01

    This study examines the occurrence and distribution of transverse lines in skeletal remains from the Copenhagen site, a plague cemetery dated 1711 AD. A relatively low frequency for evidence of line formation was observed in the individuals comprising the total sample and no transverse lines were...... present in the subadult category. This paper addresses the pattern of transverse line occurrence and cohort-specific distribution in a plague sample in light of the multiple factors influencing line formation and resorption and discusses the significance of transverse lines as measures of non...

  4. Bird's eye views earth's magnetic lines

    OpenAIRE

    Trulove, Susan

    2004-01-01

    Migratory birds, as well as many other animals, are able to sense the magnetic field of the earth, but how do they do it? "A fascinating possibility is that they may actually see the earth's magnetic lines as patterns of color or light intensity superimposed on their visual surroundings," said John B. Phillips, associate professor of biology in the College of Science at Virginia Tech. The results of more than two decades of research allow him to let such an image cross his mind.

  5. Non-coherent continuum scattering as a line polarization mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Del Pino Alemán, T.; Manso Sainz, R.; Trujillo Bueno, J., E-mail: tanausu@iac.es, E-mail: rsainz@iac.es, E-mail: jtb@iac.es [Instituto de Astrofísica de Canarias, E-38205 La Laguna, Tenerife (Spain)

    2014-03-20

    Line scattering polarization can be strongly affected by Rayleigh scattering at neutral hydrogen and Thomson scattering at free electrons. Often a depolarization of the continuum results, but the Doppler redistribution produced by the continuum scatterers, which are light (hence, fast), induces more complex interactions between the polarization in spectral lines and in the continuum. Here we formulate and solve the radiative transfer problem of scattering line polarization with non-coherent continuum scattering consistently. The problem is formulated within the spherical tensor representation of atomic and light polarization. The numerical method of solution is a generalization of the Accelerated Lambda Iteration that is applied to both the atomic system and the radiation field. We show that the redistribution of the spectral line radiation due to the non-coherence of the continuum scattering may modify the shape of the emergent fractional linear polarization patterns significantly, even yielding polarization signals above the continuum level in intrinsically unpolarizable lines.

  6. Evaluation of the British Columbia AIDS Information Line.

    Science.gov (United States)

    Parsons, D C; Bell, M A; Gilchrist, L D

    1991-01-01

    We evaluated implementation of the British Columbia AIDS Information Line during its initial 15 weeks of operation. Data collected during daily operation of the line included call frequency, caller characteristics, response patterns, caller concerns and community referrals. Information on activities and resources required to implement the AIDS Line was also assembled. The study concluded that the advertising campaign sponsored by the provincial government and other AIDS-related media events had a strong impact on the frequency of calls made to the AIDS Line. However, the effect of both advertising and media events was of relatively short duration, suggesting that utilization of an AIDS information line is dependent on continuing promotional activities. The evaluation results demonstrate the importance of continuous collection of data online utilization, to track public awareness of and response to AIDS-related issues, and to facilitate planning of public education.

  7. Line broadening by focusing

    International Nuclear Information System (INIS)

    Brito, A.L. de; Jabs, A.

    1983-01-01

    It is pointed out that the spectral width of a quasi-monochromatic light beam broadens when the beam is focused. A quantitative formula for this broadening is derived from classical wave theory. The effect is shown to explain some experiments on laser beams done by E. Panarella which that author has explained under the ad-hoc hypothesis that the frequency of the photons changes along with the intensity of the light beam. The line broadening by focusing might also contribute to gas ionization by incident light when the ionization potential is well above the mean photon energy. Some remarks are made on some direct applications of the Heisenberg relations in comparison with our treatment. (Author) [pt

  8. Pattern Perception and the Comprehension of Graphs.

    Science.gov (United States)

    Pinker, Steven

    Three experiments tested the hypothesis that graphs convey information effectively because they can display global trends as geometric patterns that visual systems encode easily. A novel type of graph was invented in which angles/lengths of line segments joined end-to-end represented variables of rainfall and temperature of a set of months. It was…

  9. Radiosensitivity of mesothelioma cell lines

    International Nuclear Information System (INIS)

    Haekkinen, A.M.; Laasonen, A.; Linnainmaa, K.; Mattson, K.; Pyrhoenen, S.

    1996-01-01

    The present study was carried out in order to examine the radiosensitivity of malignant pleural mesothelioma cell lines. Cell kinetics, radiation-induced delay of the cell cycle and DNA ploidy of the cell lines were also determined. For comparison an HeLa and a human foetal fibroblast cell line were simultaneously explored. Six previously cytogenetically and histologically characterized mesothelioma tumor cell lines were applied. A rapid tiazolyl blue microtiter (MTT) assay was used to analyze radiosensitivity and cell kinetics and DNA ploidy of the cultured cells were determined by flow cytometry. The survival fraction after a dose of 2 Gy (SF2), parameters α and β of the linear quadratic model (LQ-model) and mean inactivation dose (D MID ) were also estimated. The DNA index of four cell lines equaled 1.0 and two cell lines equaled 1.5 and 1.6. Different mesothelioma cell lines showed a great variation in radiosensitivity. Mean survival fraction after a radiation dose of 2 Gy (SF2) was 0.60 and ranged from 0.36 to 0.81 and mean α value was 0.26 (range 0.48-0.083). The SF2 of the most sensitive diploid mesothelioma cell line was 0.36: Less than that of the foetal fibroblast cell line (0.49). The survival fractions (0.81 and 0.74) of the two most resistant cell lines, which also were aneuploid, were equal to that of the HeLa cell line (0.78). The α/β ratios of the most sensitive cell lines were almost an order of magnitude greater than those of the two most resistant cell lines. Radiation-induced delay of the most resistant aneuploid cell line was similar to that of HeLa cells but in the most sensitive (diploid cells) there was practically no entry into the G1 phase following the 2 Gy radiation dose during 36 h. (orig.)

  10. Systematic hardness studies on lithium niobate crystals

    Indian Academy of Sciences (India)

    Unknown

    Chai (1995) lists a value of 5 on the Moh scale for the hardness of LiNbO3. Using a conversion formula given ... mentioned that Knoop and Vickers hardness values generally agree to within 5% (Mott 1956). Brown et al ... In the present communication, we report a detailed study of the load-dependence of hardness on two ...

  11. Systematic hardness studies on lithium niobate crystals

    Indian Academy of Sciences (India)

    Unknown

    vary from sample to sample, but is not related to the deformation mechanism in the crystal. Such load depend- ence has been observed in a variety of materials like metals (Mott 1956), ionic crystals (Pratap and Hari Babu. 1980; Thirmal Rao and Sirdeshmukh 1991; Sirdeshmukh et al 1995; Sangaiah and Kishan Rao 1993), ...

  12. Electric conductivity of lead iron niobate

    OpenAIRE

    Zieleniec, K.; Milata, M.; Wojcik, K.

    2002-01-01

    Results of d.c. electric conductivity and Seebeck coefficient measurements for PFN, PFN+Li ceramic samples and PFN single crystals are presented. Marked influence of doping with lithium on the value of electric conductivity, and on the type of electric conductance has been found.

  13. Design Verifikation Patterns

    DEFF Research Database (Denmark)

    Knudsen, John; Ravn, Anders Peter; Skou, Arne

    2007-01-01

    Design Verification Patterns are formal specifications that define the semantics of design patterns. For each design pattern, the corresponding verification pattern give a set of proof obligations. They must be discharged for a correct implementation of the pattern. Additionally there is a set of...... of properties that may be used in the design and verification of applications that employ the pattern. The concept is illustrated by examples from general software engineering and more specialised properties for embedded software.......Design Verification Patterns are formal specifications that define the semantics of design patterns. For each design pattern, the corresponding verification pattern give a set of proof obligations. They must be discharged for a correct implementation of the pattern. Additionally there is a set...

  14. Optimization of line configuration and balancing for flexible machining lines

    Science.gov (United States)

    Liu, Xuemei; Li, Aiping; Chen, Zurui

    2016-05-01

    Line configuration and balancing is to select the type of line and allot a given set of operations as well as machines to a sequence of workstations to realize high-efficiency production. Most of the current researches for machining line configuration and balancing problems are related to dedicated transfer lines with dedicated machine workstations. With growing trends towards great product variety and fluctuations in market demand, dedicated transfer lines are being replaced with flexible machining line composed of identical CNC machines. This paper deals with the line configuration and balancing problem for flexible machining lines. The objective is to assign operations to workstations and find the sequence of execution, specify the number of machines in each workstation while minimizing the line cycle time and total number of machines. This problem is subject to precedence, clustering, accessibility and capacity constraints among the features, operations, setups and workstations. The mathematical model and heuristic algorithm based on feature group strategy and polychromatic sets theory are presented to find an optimal solution. The feature group strategy and polychromatic sets theory are used to establish constraint model. A heuristic operations sequencing and assignment algorithm is given. An industrial case study is carried out, and multiple optimal solutions in different line configurations are obtained. The case studying results show that the solutions with shorter cycle time and higher line balancing rate demonstrate the feasibility and effectiveness of the proposed algorithm. This research proposes a heuristic line configuration and balancing algorithm based on feature group strategy and polychromatic sets theory which is able to provide better solutions while achieving an improvement in computing time.

  15. On-line filtering

    International Nuclear Information System (INIS)

    Verkerk, C.

    1978-01-01

    Present day electronic detectors used in high energy physics make it possible to obtain high event rates and it is likely that future experiments will face even higher data rates than at present. The complexity of the apparatus increases very rapidly with time and also the criteria for selecting desired events become more and more complex. So complex in fact that the fast trigger system cannot be designed to fully cope with it. The interesting events become thus contaminated with multitudes of uninteresting ones. To distinguish the 'good' events from the often overwhelming background of other events one has to resort to computing techniques. Normally this selection is made in the first part of the analysis of the events, analysis normally performed on a powerful scientific computer. This implies however that many uninteresting or background events have to be recorded during the experiment for subsequent analysis. A number of undesired consequences result; and these constitute a sufficient reason for trying to perform the selection at an earlier stage, in fact ideally before the events are recorded on magnetic tape. This early selection is called 'on-line filtering' and it is the topic of the present lectures. (Auth.)

  16. Bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  17. Alternate Double Single Track Lines

    Energy Technology Data Exchange (ETDEWEB)

    Moraga Contreras, P.; Grande Andrade, Z.; Castillo Ron, E.

    2016-07-01

    The paper discusses the advantages and shortcomings of alternate double single track (ADST) lines with respect to double track lines for high speed lines. ADST lines consists of sequences of double and single track segments optimally selected in order to reduce the construction and maintenance costs of railway lines and to optimize the timetables used to satisfy a given demand. The single tracks are selected to coincide with expensive segments (tunnels and viaducts) and the double tracks are chosen to coincide with flat areas and only where they are necessary. At the same time, departure times are adjusted for trains to cross at the cheap double track segments. This alternative can be used for new lines and also for existing conventional lines where some new tracks are to be constructed to reduce travel time (increase speed). The ADST proposal is illustrated with some examples of both types (new lines and where conventional lines exist), including the Palencia-Santander, the Santiago-Valparaíso-Viña del Mar and the Dublin-Belfast lines, where very important reductions (90 %) are obtained, especially where a railway infrastructure already exist. (Author)

  18. Number Line Estimation in Children with Developmental Dyscalculia

    Science.gov (United States)

    Sella, Francesco; Berteletti, Ilaria; Martina, Brazzolotto; Lucangeli, Daniela; Zorzi, Marco

    2013-01-01

    In the number to position task, several studies have shown that typically developing children shift from a biased (logarithmic) to an accurate (linear) mapping of symbolic digits onto a spatial position on a line. The initial pattern of overestimation of small numbers and the underestimation of larger numbers is compensated by means of age and…

  19. Combining Ability of Transitional Highland Maize Inbred Lines ...

    African Journals Online (AJOL)

    Generally, the magnitude of mean squares due to GCA of lines was higher than that of the SCA in most of the cases, indicating that additive gene actions were more important than non-additive with regard to inheritance of the traits studied. Keywords: Combining Ability; Gene Action; Heterotic Pattern; Zea mays. East African ...

  20. Patterns for agility

    NARCIS (Netherlands)

    Iacob, Maria Eugenia; Lankhorst, M.M.; Schrier, A.; Lankhorst, M.

    2012-01-01

    The use of patterns is an important practice in the agile software development community. There are many sources for patterns. In this chapter, we will examine several pattern collections and explore their potential contribution to system agility. We illustrate our pattern approach by a detailed

  1. Derivative Sign Patterns

    Science.gov (United States)

    Clark, Jeffrey

    2011-01-01

    Analysis of the patterns of signs of infinitely differentiable real functions shows that only four patterns are possible if the function is required to exhibit the pattern at all points in its domain and that domain is the set of all real numbers. On the other hand all patterns are possible if the domain is a bounded open interval.

  2. In-line Fiber Polarizer

    OpenAIRE

    Perumalsamy, Priya

    1998-01-01

    Polarizers and polarization devices are important components in fiber optic communication and sensor systems. There is a growing need for efficient low loss components that are compatible with optical fibers. An all fiber in-line polarizer is a more desirable alternative that could be placed at appropriate intervals along communication links. An in-line fiber polarizer was fabricated and tested. The in-line fiber polarizer operates by coupling optical energy propagatin...

  3. Artificial web of disclination lines in nematic liquid crystals.

    Science.gov (United States)

    Wang, Mengfei; Li, Yannian; Yokoyama, Hiroshi

    2017-08-30

    Disclinations are topological singularities of molecular arrangement in liquid crystals, which typically occur when the average orientation of molecules makes a π rotation along a fictitious closed loop taken inside the liquid crystal. Depending on the sense of molecular rotation, the disclination lines are either of 1/2 or -1/2 strength. When two disclination lines with the opposite strength meet, they are annihilated without trace. It is hence generally considered difficult in the nematic phase to stabilize a condensed array of free-standing disclination lines without the aid of topological objects like colloidal inclusions. Here we show that a free-standing web of 1/2-strength twist disclination lines can be stably formed in thin liquid crystal cells by means of a judicious combination of orientationally patterned confining surfaces fabricated by the micropatterned photoalignment technique. Theoretical model indicates that disclination lines are held apart at the intersection by a repulsive force generated by the Frank elasticity.Disclination lines are topological defects in molecular orientation widely found in liquid crystals. Here Wang et al. use a surface patterning technique to produce a very stable freestanding 3D array of ½ twist disclinations, which could be exploited in a variety of nanometre scale applications.

  4. Lines of Best Fit by Graphics and the Wald Line.

    Science.gov (United States)

    Henriksen, Melvin, Ed.; Wagon, Stan, Ed.

    1991-01-01

    Using a graphical analysis of the linear best fit for a set of Cartesian data points, the drawbacks of the least-squares method for determining this best fit are discussed. The Wald Line, which utilizes a variation of the geometric mean, is proposed as the best alternative to the least-squares regression line particularly when the data contain…

  5. Cytokeratin 19 Expression Patterns of Dentigerous Cysts and ...

    African Journals Online (AJOL)

    Background: Although numerous investigators have studied the pattern of keratin expression in different odontogenic cysts, the results have been variable. Aim: The present study was conducted to determine the pattern of expression of cytokeratin 19 (CK 19) in the epithelial lining of odontogenic keratocysts and ...

  6. Application of data clustering to railway delay pattern recognition

    DEFF Research Database (Denmark)

    Cerreto, Fabrizio; Nielsen, Bo Friis; Nielsen, Otto Anker

    2018-01-01

    K-means clustering is employed to identify recurrent delay patterns on a high traffic railway line north of Copenhagen, Denmark. The clusters identify behavioral patterns in the very large (“big data”) data sets generated automatically and continuously by the railway signal system. The results...

  7. Drug/Cell-line Browser: interactive canvas visualization of cancer drug/cell-line viability assay datasets.

    Science.gov (United States)

    Duan, Qiaonan; Wang, Zichen; Fernandez, Nicolas F; Rouillard, Andrew D; Tan, Christopher M; Benes, Cyril H; Ma'ayan, Avi

    2014-11-15

    Recently, several high profile studies collected cell viability data from panels of cancer cell lines treated with many drugs applied at different concentrations. Such drug sensitivity data for cancer cell lines provide suggestive treatments for different types and subtypes of cancer. Visualization of these datasets can reveal patterns that may not be obvious by examining the data without such efforts. Here we introduce Drug/Cell-line Browser (DCB), an online interactive HTML5 data visualization tool for interacting with three of the recently published datasets of cancer cell lines/drug-viability studies. DCB uses clustering and canvas visualization of the drugs and the cell lines, as well as a bar graph that summarizes drug effectiveness for the tissue of origin or the cancer subtypes for single or multiple drugs. DCB can help in understanding drug response patterns and prioritizing drug/cancer cell line interactions by tissue of origin or cancer subtype. DCB is an open source Web-based tool that is freely available at: http://www.maayanlab.net/LINCS/DCB CONTACT: avi.maayan@mssm.edu Supplementary data are available at Bioinformatics online. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  8. Similarity law for Widom lines and coexistence lines.

    Science.gov (United States)

    Banuti, D T; Raju, M; Ihme, M

    2017-05-01

    The coexistence line of a fluid separates liquid and gaseous states at subcritical pressures, ending at the critical point. Only recently, it became clear that the supercritical state space can likewise be divided into regions with liquidlike and gaslike properties, separated by an extension to the coexistence line. This crossover line is commonly referred to as the Widom line, and is characterized by large changes in density or enthalpy, manifesting as maxima in the thermodynamic response functions. Thus, a reliable representation of the coexistence line and the Widom line is important for sub- and supercritical applications that depend on an accurate prediction of fluid properties. While it is known for subcritical pressures that nondimensionalization with the respective species critical pressures p_{cr} and temperatures T_{cr} only collapses coexistence line data for simple fluids, this approach is used for Widom lines of all fluids. However, we show here that the Widom line does not adhere to the corresponding states principle, but instead to the extended corresponding states principle. We resolve this problem in two steps. First, we propose a Widom line functional based on the Clapeyron equation and derive an analytical, species specific expression for the only parameter from the Soave-Redlich-Kwong equation of state. This parameter is a function of the acentric factor ω and compares well with experimental data. Second, we introduce the scaled reduced pressure p_{r}^{*} to replace the previously used reduced pressure p_{r}=p/p_{cr}. We show that p_{r}^{*} is a function of the acentric factor only and can thus be readily determined from fluid property tables. It collapses both subcritical coexistence line and supercritical Widom line data over a wide range of species with acentric factors ranging from -0.38 (helium) to 0.34 (water), including alkanes up to n-hexane. By using p_{r}^{*}, the extended corresponding states principle can be applied within

  9. Magnetic bearing optical delay line

    NARCIS (Netherlands)

    Dool, T.C. van den; Kamphues, F.G.; Fouss, B.; Henrioulle, K.; Hogenhuis, H.

    2004-01-01

    TNO TPD, in close cooperation with Micromega-Dynamics and Dutch Space, has developed an advanced Optical Delay Line (ODL) for use in PRIMA, GENIE and other ground based interferometers. The delay line design is modular and flexible, which makes scaling for other applications a relatively easy task.

  10. What was the Assembly Line?

    DEFF Research Database (Denmark)

    Nye, David

    2010-01-01

    The assembly line is still evolving a century after its invention, and it was not a distinct historical stage, nor was it part of an inevitable sequence that followed "Taylorism."......The assembly line is still evolving a century after its invention, and it was not a distinct historical stage, nor was it part of an inevitable sequence that followed "Taylorism."...

  11. Marine line fish research programme

    CSIR Research Space (South Africa)

    SANCOR

    1979-04-01

    Full Text Available This report outlines the framework for a marine line fish programme under the aegis of the South African National Committee for Oceanographic Research (SANCOR). An attempt is made to assess the state of knowledge about South African marine line...

  12. Drops, contact lines, and electrowetting

    NARCIS (Netherlands)

    't Mannetje, Dieter

    2013-01-01

    In this work, we study the behaviour of drops and contact lines under the influence of electric fields, and how these can answer fundamental and industrial questions. Our focus is on studying the varying balance of the electric field, hysteresis forces and inertia as the speed of a contact line

  13. Mechanical Behaviour of Lined Pipe

    NARCIS (Netherlands)

    Hilberink, A.

    2011-01-01

    Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

  14. Pattern uniformity control in integrated structures

    Science.gov (United States)

    Kobayashi, Shinji; Okada, Soichiro; Shimura, Satoru; Nafus, Kathleen; Fonseca, Carlos; Biesemans, Serge; Enomoto, Masashi

    2017-03-01

    In our previous paper dealing with multi-patterning, we proposed a new indicator to quantify the quality of final wafer pattern transfer, called interactive pattern fidelity error (IPFE). It detects patterning failures resulting from any source of variation in creating integrated patterns. IPFE is a function of overlay and edge placement error (EPE) of all layers comprising the final pattern (i.e. lower and upper layers). In this paper, we extend the use cases with Via in additional to the bridge case (Block on Spacer). We propose an IPFE budget and CD budget using simple geometric and statistical models with analysis of a variance (ANOVA). In addition, we validate the model with experimental data. From the experimental results, improvements in overlay, local-CDU (LCDU) of contact hole (CH) or pillar patterns (especially, stochastic pattern noise (SPN)) and pitch walking are all critical to meet budget requirements. We also provide a special note about the importance of the line length used in analyzing LWR. We find that IPFE and CD budget requirements are consistent to the table of the ITRS's technical requirement. Therefore the IPFE concept can be adopted for a variety of integrated structures comprising digital logic circuits. Finally, we suggest how to use IPFE for yield management and optimization requirements for each process.

  15. Radiosensitivity of mesothelioma cell lines

    Energy Technology Data Exchange (ETDEWEB)

    Haekkinen, A.M. [Dept. of Oncology, Univ. Central Hospital, Helsinki (Finland); Laasonen, A. [Dept. of Pathology, Central Hospital of Etelae-Pohjanmaa, Seinaejoki (Finland); Linnainmaa, K. [Dept. of Industrial Hygiene and Toxicology, Inst. of Occupational Health, Helsinki (Finland); Mattson, K. [Dept. Pulmonary Medicine, Univ. Central Hospital, Helsinki (Finland); Pyrhoenen, S. [Dept. of Oncology, Univ. Central Hospital, Helsinki (Finland)

    1996-10-01

    The present study was carried out in order to examine the radiosensitivity of malignant pleural mesothelioma cell lines. Cell kinetics, radiation-induced delay of the cell cycle and DNA ploidy of the cell lines were also determined. For comparison an HeLa and a human foetal fibroblast cell line were simultaneously explored. Six previously cytogenetically and histologically characterized mesothelioma tumor cell lines were applied. A rapid tiazolyl blue microtiter (MTT) assay was used to analyze radiosensitivity and cell kinetics and DNA ploidy of the cultured cells were determined by flow cytometry. The survival fraction after a dose of 2 Gy (SF2), parameters {alpha} and {beta} of the linear quadratic model (LQ-model) and mean inactivation dose (D{sub MID}) were also estimated. The DNA index of four cell lines equaled 1.0 and two cell lines equaled 1.5 and 1.6. Different mesothelioma cell lines showed a great variation in radiosensitivity. Mean survival fraction after a radiation dose of 2 Gy (SF2) was 0.60 and ranged from 0.36 to 0.81 and mean {alpha} value was 0.26 (range 0.48-0.083). The SF2 of the most sensitive diploid mesothelioma cell line was 0.36: Less than that of the foetal fibroblast cell line (0.49). The survival fractions (0.81 and 0.74) of the two most resistant cell lines, which also were aneuploid, were equal to that of the HeLa cell line (0.78). The {alpha}/{beta} ratios of the most sensitive cell lines were almost an order of magnitude greater than those of the two most resistant cell lines. Radiation-induced delay of the most resistant aneuploid cell line was similar to that of HeLa cells but in the most sensitive (diploid cells) there was practically no entry into the G1 phase following the 2 Gy radiation dose during 36 h. (orig.).

  16. US line-ups outperform UK line-ups.

    Science.gov (United States)

    Seale-Carlisle, Travis M; Mickes, Laura

    2016-09-01

    In the USA and the UK, many thousands of police suspects are identified by eyewitnesses every year. Unfortunately, many of those suspects are innocent, which becomes evident when they are exonerated by DNA testing, often after having been imprisoned for years. It is, therefore, imperative to use identification procedures that best enable eyewitnesses to discriminate innocent from guilty suspects. Although police investigators in both countries often administer line-up procedures, the details of how line-ups are presented are quite different and an important direct comparison has yet to be conducted. We investigated whether these two line-up procedures differ in terms of (i) discriminability (using receiver operating characteristic analysis) and (ii) reliability (using confidence-accuracy characteristic analysis). A total of 2249 participants watched a video of a crime and were later tested using either a six-person simultaneous photo line-up procedure (USA) or a nine-person sequential video line-up procedure (UK). US line-up procedure yielded significantly higher discriminability and significantly higher reliability. The results do not pinpoint the reason for the observed difference between the two procedures, but they do suggest that there is much room for improvement with the UK line-up.

  17. Formación on line On line learning

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    2008-09-01

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.On line learning is a type of distance education based on new technologies. This article's aim is to introduce its main characteristics -asynchrony, non-presentiality, written communication, e-teacher role- as well as its challenges, risks, advantages and limitations. Differences between on line learning and face-to-face learning are presented in order to enable educational professionals to adapt their courses to the on line methodology. Planning and designing are introduced as key phases and, finally, useful concepts such as Virtual Learning Environment (VLE or Blended Learning (B-Learning are reviewed in order to achieve a better understanding of the on line learning field.

  18. Patterning pentacene surfaces by local oxidation nanolithography

    International Nuclear Information System (INIS)

    Losilla, N.S.; Martinez, J.; Bystrenova, E.; Greco, P.; Biscarini, F.; Garcia, R.

    2010-01-01

    Sequential and parallel local oxidation nanolithographies have been applied to pattern pentacene samples by creating a variety of nanostructures. The sequential local oxidation process is performed with an atomic force microscope and requires the application of a sequence of voltage pulses of 36 V for 1 ms. The parallel local oxidation process is performed by using a conductive and patterned stamp. Then, a voltage pulse is applied between the stamp and the pentacene surface. Patterns formed by arrays of parallel lines covering 1 mm 2 regions and with a periodicity of less than 1 μm have been generated in a few seconds. We also show that the patterns can be used as templates for the deposition of antibodies.

  19. Patterning pentacene surfaces by local oxidation nanolithography

    Energy Technology Data Exchange (ETDEWEB)

    Losilla, N.S., E-mail: nuria@imm.cnm.csic.es [Instituto de Microelectronica de Madrid: CSIC, Isaac Newton 8, 28760 Tres Cantos, Madrid (Spain); Martinez, J. [Instituto de Microelectronica de Madrid: CSIC, Isaac Newton 8, 28760 Tres Cantos, Madrid (Spain); Bystrenova, E.; Greco, P.; Biscarini, F. [Institute for Nanostructured Materials: CNR (ISMN-CNR), Via Gobetti 101, 40129 Bologna (Italy); Garcia, R., E-mail: rgarcia@imm.cnm.csic.es [Instituto de Microelectronica de Madrid: CSIC, Isaac Newton 8, 28760 Tres Cantos, Madrid (Spain)

    2010-05-15

    Sequential and parallel local oxidation nanolithographies have been applied to pattern pentacene samples by creating a variety of nanostructures. The sequential local oxidation process is performed with an atomic force microscope and requires the application of a sequence of voltage pulses of 36 V for 1 ms. The parallel local oxidation process is performed by using a conductive and patterned stamp. Then, a voltage pulse is applied between the stamp and the pentacene surface. Patterns formed by arrays of parallel lines covering 1 mm{sup 2} regions and with a periodicity of less than 1 {mu}m have been generated in a few seconds. We also show that the patterns can be used as templates for the deposition of antibodies.

  20. Pattern production through a chiral chasing mechanism

    Science.gov (United States)

    Woolley, Thomas E.

    2017-09-01

    Recent experiments on zebrafish pigmentation suggests that their typical black and white striped skin pattern is made up of a number of interacting chromatophore families. Specifically, two of these cell families have been shown to interact through a nonlocal chasing mechanism, which has previously been modeled using integro-differential equations. We extend this framework to include the experimentally observed fact that the cells often exhibit chiral movement, in that the cells chase, and run away, at angles different to the line connecting their centers. This framework is simplified through the use of multiple small limits leading to a coupled set of partial differential equations which are amenable to Fourier analysis. This analysis results in the production of dispersion relations and necessary conditions for a patterning instability to occur. Beyond the theoretical development and the production of new pattern planiforms we are able to corroborate the experimental hypothesis that the global pigmentation patterns can be dependent on the chirality of the chromatophores.

  1. Caching Patterns and Implementation

    Directory of Open Access Journals (Sweden)

    Octavian Paul ROTARU

    2006-01-01

    Full Text Available Repetitious access to remote resources, usually data, constitutes a bottleneck for many software systems. Caching is a technique that can drastically improve the performance of any database application, by avoiding multiple read operations for the same data. This paper addresses the caching problems from a pattern perspective. Both Caching and caching strategies, like primed and on demand, are presented as patterns and a pattern-based flexible caching implementation is proposed.The Caching pattern provides method of expensive resources reacquisition circumvention. Primed Cache pattern is applied in situations in which the set of required resources, or at least a part of it, can be predicted, while Demand Cache pattern is applied whenever the resources set required cannot be predicted or is unfeasible to be buffered.The advantages and disadvantages of all the caching patterns presented are also discussed, and the lessons learned are applied in the implementation of the pattern-based flexible caching solution proposed.

  2. Male pattern baldness (image)

    Science.gov (United States)

    Male pattern baldness is a sex-linked characteristic that is passed from mother to child. A man can more accurately predict his chances of developing male pattern baldness by observing his mother's father than by ...

  3. Challenges and opportunities in ‘last mile’ logistics for on-line food retail

    NARCIS (Netherlands)

    Trienekens, Jacques; Hvolby, Hans Henrik; Turner, Paul

    2017-01-01

    Conventional approaches to logistics for food retail continue to be challenged by the rapid growth of on-line food retail. At the same time, ‘last mile’ logistics optimization for on-line retail also face challenges as changing consumer expectations, habits and purchasing patterns intersect with

  4. Line structures in recurrence plots

    International Nuclear Information System (INIS)

    Marwan, Norbert; Kurths, Juergen

    2005-01-01

    Recurrence plots exhibit line structures which represent typical behaviour of the investigated system. The local slope of these line structures is connected with a specific transformation of the time scales of different segments of the phase-space trajectory. This provides us a better understanding of the structures occurring in recurrence plots. The relationship between the time-scales and line structures are of practical importance in cross recurrence plots. Using this relationship within cross recurrence plots, the time-scales of differently sampled or time-transformed measurements can be adjusted. An application to geophysical measurements illustrates the capability of this method for the adjustment of time-scales in different measurements

  5. rf reference line for PEP

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, H.D.; Weaver, J.N.

    1979-03-01

    A rf phase reference line in 6 segments around the 2200 meter circumference PEP storage ring is described. Each segment of the reference line is phase stabilized by its own independent feedback system, which uses an amplitude modulated reflection from the end of each line. The modulation is kept small and decoupled from the next segment to avoid crosstalk and significant modulation of the rf drive signal. An error evaluation of the system is made. The technical implementation and prototype performance are described. Prototype tests indicate that the phase error around the ring can be held below 1 degree with this relatively simple system.

  6. Application studies of line arresters

    Energy Technology Data Exchange (ETDEWEB)

    Zanetta Junior, Luiz Cera; Pereira, Carlos Eduardo de Morais [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia de Energia e Automacao Eletricas]. E-mail: lzanetta@pea.usp.br

    2001-07-01

    This paper presents the main calculations of the line arresters impact on outage rates, by focusing their effects on critical current curves, in presence of the power frequency voltage. The present critical results obtained will help in the understanding of some variables during the outrage calculations. Energy stresses on arresters due to first stroke are also evaluated in function of tower foot resistance. The transmission line studied, has a shielded 138 kV line configuration, single circuit typical of Brazilian SE region. The alternative with Zn O arresters consider their installation at every tower, in the two lower phases b and c. (author)

  7. Status of ACCULINNA beam line

    CERN Document Server

    Rodin, A M; Bogdanov, D D; Golovkov, M S; Fomichev, A S; Sidorchuk, S I; Slepnev, R S; Wolski, R; Ter-Akopian, G M; Oganessian, Yu T; Yukhimchuk, A A; Perevozchikov, V V; Vinogradov, Yu I; Grishenchkin, S K; Demin, A M; Zlatoustovskii, S V; Kuryakin, A V; Filchagin, S V; Ilkaev, R I

    2003-01-01

    The separator ACCULINNA was upgraded to achieve new experimental requirements. The beam line was extended by new ion-optical elements beyond the cyclotron hall. The new arrangements yield much better background conditions. The intensities of sup 6 He and sup 8 He radioactive beams produced in fragmentation of 35 A MeV sup 1 sup 1 B ions were increased up to a factor of 10. The upgraded beam line was used in experiments to study the sup 5 H resonance states populated in the t+t reaction. A cryogenic liquid tritium target was designed and installed at the separator beam line.

  8. Analysis of some coplanar transmission lines: coplanar coupled lines, coplanar coupled striplines, and coplanar coupled lines with rectangular microshield

    Science.gov (United States)

    Yuan, Naichang; He, Jianguo; Yao, Demiao; Dai, Qin; Lin, Weigan

    1995-06-01

    Two types of coplanar transmission lines, rectangular microshield coplanar coupled lines (RMCCL) and coplanar coupled rectangular microshield lines (CCRML), are proposed for MMIC applications. These are developed from coplanar coupled lines (CCL) and coplanar coupled strip lines (CCS). Analytic formulas are presented for calculating the quasistatic TEM parameters of these coupled lines by means of exact conformal mapping techniques. Numerical results are also presented to illustrate the properties of these coplanar transmission lines.

  9. Automated pattern recognition system for noise analysis

    International Nuclear Information System (INIS)

    Sides, W.H. Jr.; Piety, K.R.

    1980-01-01

    A pattern recognition system was developed at ORNL for on-line monitoring of noise signals from sensors in a nuclear power plant. The system continuousy measures the power spectral density (PSD) values of the signals and the statistical characteristics of the PSDs in unattended operation. Through statistical comparison of current with past PSDs (pattern recognition), the system detects changes in the noise signals. Because the noise signals contain information about the current operational condition of the plant, a change in these signals could indicate a change, either normal or abnormal, in the operational condition

  10. Analysis of differential protein expression in normal and neoplastic human breast epithelial cell lines

    Energy Technology Data Exchange (ETDEWEB)

    Williams, K.; Chubb, C.; Huberman, E.; Giometti, C.S.

    1997-07-01

    High resolution two dimensional get electrophoresis (2DE) and database analysis was used to establish protein expression patterns for cultured normal human mammary epithelial cells and thirteen breast cancer cell lines. The Human Breast Epithelial Cell database contains the 2DE protein patterns, including relative protein abundances, for each cell line, plus a composite pattern that contains all the common and specifically expressed proteins from all the cell lines. Significant differences in protein expression, both qualitative and quantitative, were observed not only between normal cells and tumor cells, but also among the tumor cell lines. Eight percent of the consistently detected proteins were found in significantly (P < 0.001) variable levels among the cell lines. Using a combination of immunostaining, comigration with purified protein, subcellular fractionation, and amino-terminal protein sequencing, we identified a subset of the differentially expressed proteins. These identified proteins include the cytoskeletal proteins actin, tubulin, vimentin, and cytokeratins. The cell lines can be classified into four distinct groups based on their intermediate filament protein profile. We also identified heat shock proteins; hsp27, hsp60, and hsp70 varied in abundance and in some cases in the relative phosphorylation levels among the cell lines. Finally, we identified IMP dehydrogenase in each of the cell lines, and found the levels of this enzyme in the tumor cell lines elevated 2- to 20-fold relative to the levels in normal cells.

  11. Louisiana ESI: ROADS (Road Lines)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the state maintained primary and secondary road network of Louisiana. Vector lines in the data set represent Interstates, U.S. Highways, and...

  12. Line bundles and flat connections

    Indian Academy of Sciences (India)

    0344-5. Line bundles and flat connections. INDRANIL BISWAS1,∗ and GEORG SCHUMACHER2. 1School of Mathematics, Tata Institute of Fundamental Research, Homi Bhabha Road,. Mumbai 400 005, India. 2Fachbereich Mathematik und ...

  13. Base Flood Elevation (BFE) Lines

    Data.gov (United States)

    Department of Homeland Security — The Base Flood Elevation (BFE) table is required for any digital data where BFE lines will be shown on the corresponding Flood Insurance Rate Map (FIRM). Normally if...

  14. Measures for Software Product Lines

    National Research Council Canada - National Science Library

    Zubrow, Dave

    2003-01-01

    This technical note characterizes the status of measurement associated with the operation of a software product line, suggests a small set of measures to support its management, and provides guidance...

  15. Control Point Generated PLS - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — The Control Point Generated PLS layer contains line and polygon features to the 1/4 of 1/4 PLS section (approximately 40 acres) and government lot level. The layer...

  16. Composite Materials in Overhead Lines

    DEFF Research Database (Denmark)

    Sørensen, Thomas Kjærsgaard; Holbøll, Joachim

    2009-01-01

    The use of composite materials, e.g. fibreglass materials, in overhead transmission line systems is nothing new. Composite based insulators have been applied to transmission lines for over 30 years, mainly as suspension and post insulators and often as an option for special applications. Also...... towers and recently conductors based on composite materials are available at transmission levels. In this paper it is investigated which composite based solutions are available in connection with complete overhead line systems including insulators, towers and conductors. The components are reviewed...... with respect to solved and persisting known failures/problems of both mechanical and electrical nature. Major challenges related to extensive use of composite materials in an overhead line system are identified, as are possible benefits - both when using standard as well as customised composite components, e...

  17. In vitro invasion of small-cell lung cancer cell lines correlates with expression of epidermal growth factor receptor

    DEFF Research Database (Denmark)

    Damstrup, L; Rude Voldborg, B; Spang-Thomsen, M

    1998-01-01

    receptor (EGFR) in a panel of 21 small-cell lung cancer (SCLC) cell lines. We have previously reported that ten of these cell lines expressed EGFR protein detected by radioreceptor and affinity labelling assays. In 11 small-cell lung cancer (SCLC) cell lines, EGFR mRNA was detected by Northern blot...... analysis. In vitro invasion in a Boyden chamber assay was found in all EGFR-positive cell lines, whereas no invasion was detected in the EGFR-negative cell lines. Quantification of the in vitro invasion in 12 selected SCLC cell lines demonstrated that, in the EGFR-positive cell lines, between 5% and 16......-PCR). However, in vitro invasive SCLC cell lines could not be distinguished from non-invasive cell lines based on the expression pattern of these molecules. In six SCLC cell lines, in vitro invasion was also determined in the presence of the EGFR-neutralizing monoclonal antibody mAb528. The addition...

  18. SAF line analytical chemistry system

    International Nuclear Information System (INIS)

    Gerber, E.W.; Sherrell, D.L.

    1983-10-01

    An analytical chemistry system dedicated to supporting the Secure Automated Fabrication (SAF) line is discussed. Several analyses are required prior to the fuel pellets being loaded into cladding tubes to assure certification requirements will be met. These analyses, which will take less than 15 minutes, are described. The automated sample transport system which will be used to move pellets from the fabriction line to the chemistry area is also described

  19. Radio and line transmission 2

    CERN Document Server

    Roddy, Dermot

    2013-01-01

    Radio and Line Transmission, Volume 2 gives a detailed treatment of the subject as well as an introduction to additional advanced subject matter. Organized into 14 chapters, this book begins by explaining the radio wave propagation, signal frequencies, and bandwidth. Subsequent chapters describe the transmission lines and cables; the aerials; tuned and coupled circuits; bipolar transistor amplifiers; field-effect transistors and circuits; thermionic valve amplifiers; LC oscillators; the diode detectors and modulators; and the superheterodyne receiver. Other chapters explore noise and interfere

  20. ESR powder line shape calculations

    Energy Technology Data Exchange (ETDEWEB)

    Vitko, J. Jr.; Huddleston, R.E.

    1976-05-01

    A program has been developed for computing the ESR spectrum of a collection of randomly oriented spins subject only to an electronic Zeeman interaction and having a Lorentzian single crystal line shape. Other single crystal line shapes, including numerical solutions of the Bloch equations, can be accommodated with minor modifications. The program differs in several features from those existing elsewhere, thus enabling one to study saturation effects, over-modulation effects, both absorptive and dispersive signals, and second and higher order derivative signals.

  1. Pattern centric design based sensitive patterns and process monitor in manufacturing

    Science.gov (United States)

    Hsiang, Chingyun; Cheng, Guojie; Wu, Kechih

    2017-03-01

    When design rule is mitigating to smaller dimension, process variation requirement is tighter than ever and challenges the limits of device yield. Masks, lithography, etching and other processes have to meet very tight specifications in order to keep defect and CD within the margins of the process window. Conventionally, Inspection and metrology equipments are utilized to monitor and control wafer quality in-line. In high throughput optical inspection, nuisance and review-classification become a tedious labor intensive job in manufacturing. Certain high-resolution SEM images are taken to validate defects after optical inspection. These high resolution SEM images catch not only optical inspection highlighted point, also its surrounding patterns. However, this pattern information is not well utilized in conventional quality control method. Using this complementary design based pattern monitor not only monitors and analyzes the variation of patterns sensitivity but also reduce nuisance and highlight defective patterns or killer defects. After grouping in either single or multiple layers, systematic defects can be identified quickly in this flow. In this paper, we applied design based pattern monitor in different layers to monitor process variation impacts on all kinds of patterns. First, the contour of high resolutions SEM image is extracted and aligned to design with offset adjustment and fine alignment [1]. Second, specified pattern rules can be applied on design clip area, the same size as SEM image, and form POI (pattern of interest) areas. Third, the discrepancy of contour and design measurement at different pattern types in measurement blocks. Fourth, defective patterns are reported by discrepancy detection criteria and pattern grouping [4]. Meanwhile, reported pattern defects are ranked by number and severity by discrepancy. In this step, process sensitive high repeatable systematic defects can be identified quickly Through this design based process pattern

  2. Dietary Patterns in Childhood

    DEFF Research Database (Denmark)

    Andersen, Louise Beltoft Borup

    single food. People consume meals and these meals vary during a day, over a year and during a life time. To comprehend some of this complexity it could be advantageous to investigate dietary patterns representing the whole diet as patterns might be better markers of growth and health than single...... nutrients. However, little is known about the development of dietary patterns in childhood both in relation to possible indicators and to obesity related outcomes. Therefore, the aim of this PhD thesis was to make exploratory analyses of dietary patterns in childhood using the method principal component...... of the complexity in child nutrition both in observational and intervention designs as well as for investigating development of dietary patterns over time. Explorative analyses of indicators for dietary patterns showed that parental, household and child characteristics are associated with dietary patterns in early...

  3. Polarization of Coronal Forbidden Lines

    Energy Technology Data Exchange (ETDEWEB)

    Li, Hao; Qu, Zhongquan [Yunnan Observatories, Chinese Academy of Sciences, Kunming, Yunnan 650011 (China); Landi Degl’Innocenti, Egidio, E-mail: sayahoro@ynao.ac.cn [Dipartimento di Astronomia e Scienza dello Spazio, Università di Firenze, Largo E. Fermi 2, I-50125 Firenze (Italy)

    2017-03-20

    Since the magnetic field is responsible for most manifestations of solar activity, one of the most challenging problems in solar physics is the diagnostics of solar magnetic fields, particularly in the outer atmosphere. To this end, it is important to develop rigorous diagnostic tools to interpret polarimetric observations in suitable spectral lines. This paper is devoted to analyzing the diagnostic content of linear polarization imaging observations in coronal forbidden lines. Although this technique is restricted to off-limb observations, it represents a significant tool to diagnose the magnetic field structure in the solar corona, where the magnetic field is intrinsically weak and still poorly known. We adopt the quantum theory of polarized line formation developed in the framework of the density matrix formalism, and synthesize images of the emergent linear polarization signal in coronal forbidden lines using potential-field source-surface magnetic field models. The influence of electronic collisions, active regions, and Thomson scattering on the linear polarization of coronal forbidden lines is also examined. It is found that active regions and Thomson scattering are capable of conspicuously influencing the orientation of the linear polarization. These effects have to be carefully taken into account to increase the accuracy of the field diagnostics. We also found that linear polarization observation in suitable lines can give valuable information on the long-term evolution of the magnetic field in the solar corona.

  4. Antarctic grounding-line migration

    Science.gov (United States)

    Slater, T.; Konrad, H.; Shepherd, A.; Gilbert, L.; Hogg, A.; McMillan, M.; Muir, A. S.

    2017-12-01

    Knowledge of grounding-line position is critical for quantifying ice discharge into the ocean, as a boundary condition for numerical models of ice flow, and as an indicator of ice sheet stability. Although geological investigations have documented extensive grounding-line retreat since the period of the Last Glacial Maximum, observations of grounding line migration during the satellite era are restricted to a handful of locations. We combine satellite altimeter observations of ice-elevation change and airborne measurements of ice geometry to track movement of the Antarctic Ice Sheet grounding line. Based on these data, we estimate that 22%, 3%, and 10% of the West Antarctic, East Antarctic, and Antarctic Peninsula ice sheet grounding lines are retreating at rates faster than the typical pace since the Last Glacial Maximum, and that the continent loses over 200 km2 of grounded-ice area per year. Although by far the fastest rates of retreat occurred in the Amundsen Sea Sector, the Pine Island Glacier grounding line has stabilized - likely as a consequence of abated ocean forcing during the survey period.

  5. 76 FR 51367 - China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company Limited; Evergreen Line A...

    Science.gov (United States)

    2011-08-18

    ... FEDERAL MARITIME COMMISSION [Docket No. 11-12] China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company Limited; Evergreen Line A Joint Service Agreement; Hanjin Shipping Co., Ltd... Maritime Commission (Commission) by China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company...

  6. Multicomponent Droplet Evaporation on Chemical Micro-Patterned Surfaces

    Science.gov (United States)

    He, Minghao; Liao, Dong; Qiu, Huihe

    2017-01-01

    The evaporation and dynamics of a multicomponent droplet on a heated chemical patterned surface were presented. Comparing to the evaporation process of a multicomponent droplet on a homogenous surface, it is found that the chemical patterned surface can not only enhance evaporation by elongating the contact line, but also change the evaporation process from three regimes for the homogenous surface including constant contact line (CCL) regime, constant contact angle (CCA) regime and mix mode (MM) to two regimes, i.e. constant contact line (CCL) and moving contact line (MCL) regimes. The mechanism of contact line stepwise movement in MCL regimes in the microscopic range is investigated in detail. In addition, an improved local force model on the contact line was employed for analyzing the critical receding contact angles on homogenous and patterned surfaces. The analysis results agree well for both surfaces, and confirm that the transition from CCL to MCL regimes indicated droplet composition changes from multicomponent to monocomponent, providing an important metric to predict and control the dynamic behavior and composition of a multicomponent droplet using a patterned surface. PMID:28157229

  7. A robust line extraction and matching algorithm

    Science.gov (United States)

    Hussien, B.; Sridhar, B.

    1993-01-01

    This paper presents an algorithm for extracting straight lines from intensity mages and describes a line matching algorithm for solving the line correspondence problem. The line extraction process begins by detecting edges in the intensity image. Next, line support regions are formed where image points (pixels) have similar gradient orientation. A line fitting algorithm is then used to fit a line to the points in the line support region based on a least means square fitting algorithm. Finally, line segments are linked together to form the final lines by using an adaptive line linking method; this results in much stronger lines and a smaller set of lines to be considered. Once the lines are detected in a sequence of images, a line matching algorithm is used to match lines in one image to the lines in the other image. The images are either from a motion or stereo sequence. The matched lines may then be used with the sensor position and orientation data to estimate range to objects corresponding to the lines. We present results based on applying the line extraction and line matching algorithms to a synthetic image and an outdoor scene captured by a camera on a helicopter.

  8. Fuzzy automata and pattern matching

    Science.gov (United States)

    Setzer, C. B.; Warsi, N. A.

    1986-01-01

    A wide-ranging search for articles and books concerned with fuzzy automata and syntactic pattern recognition is presented. A number of survey articles on image processing and feature detection were included. Hough's algorithm is presented to illustrate the way in which knowledge about an image can be used to interpret the details of the image. It was found that in hand generated pictures, the algorithm worked well on following the straight lines, but had great difficulty turning corners. An algorithm was developed which produces a minimal finite automaton recognizing a given finite set of strings. One difficulty of the construction is that, in some cases, this minimal automaton is not unique for a given set of strings and a given maximum length. This algorithm compares favorably with other inference algorithms. More importantly, the algorithm produces an automaton with a rigorously described relationship to the original set of strings that does not depend on the algorithm itself.

  9. A novel double patterning approach for 30nm dense holes

    Science.gov (United States)

    Hsu, Dennis Shu-Hao; Wang, Walter; Hsieh, Wei-Hsien; Huang, Chun-Yen; Wu, Wen-Bin; Shih, Chiang-Lin; Shih, Steven

    2011-04-01

    Double Patterning Technology (DPT) was commonly accepted as the major workhorse beyond water immersion lithography for sub-38nm half-pitch line patterning before the EUV production. For dense hole patterning, classical DPT employs self-aligned spacer deposition and uses the intersection of horizontal and vertical lines to define the desired hole patterns. However, the increase in manufacturing cost and process complexity is tremendous. Several innovative approaches have been proposed and experimented to address the manufacturing and technical challenges. A novel process of double patterned pillars combined image reverse will be proposed for the realization of low cost dense holes in 30nm node DRAM. The nature of pillar formation lithography provides much better optical contrast compared to the counterpart hole patterning with similar CD requirements. By the utilization of a reliable freezing process, double patterned pillars can be readily implemented. A novel image reverse process at the last stage defines the hole patterns with high fidelity. In this paper, several freezing processes for the construction of the double patterned pillars were tested and compared, and 30nm double patterning pillars were demonstrated successfully. A variety of different image reverse processes will be investigated and discussed for their pros and cons. An economic approach with the optimized lithography performance will be proposed for the application of 30nm DRAM node.

  10. Artificial intelligence tools for pattern recognition

    Science.gov (United States)

    Acevedo, Elena; Acevedo, Antonio; Felipe, Federico; Avilés, Pedro

    2017-06-01

    In this work, we present a system for pattern recognition that combines the power of genetic algorithms for solving problems and the efficiency of the morphological associative memories. We use a set of 48 tire prints divided into 8 brands of tires. The images have dimensions of 200 x 200 pixels. We applied Hough transform to obtain lines as main features. The number of lines obtained is 449. The genetic algorithm reduces the number of features to ten suitable lines that give thus the 100% of recognition. Morphological associative memories were used as evaluation function. The selection algorithms were Tournament and Roulette wheel. For reproduction, we applied one-point, two-point and uniform crossover.

  11. Towards Perfect Water Line Intensities

    Science.gov (United States)

    Lodi, L.; Tennyson, J.

    2012-06-01

    Over the last ten years the increased availability of computational resources and the steady refinement of theoretical methods have permitted more and more accurate first principle calculations of water-vapor spectra as exemplified, e.g., by the very successful BT2 line list both line positions and intensities, a reliable dipole moment surface (DMS), affecting line intensities. It is also very useful to several application to give reasonable uncertainty bars for computed quantities, an aspect which traditionally has received little attention. We report here recent progress leading to very accurate room-temperature linelists covering the range 0.05-20 000 cm-1, complete with uncertainty bars, for the H_218O and H_217O water isotopologues Line intensities were produced using a recent DMS produced by our group which is capable of giving line intensites accurate to 1% for most medium and strong transitions. Line positions are based if possible on the experimentally derived energy levels recently produced by a IUPAC task group and have a typical accuracy of 0.0002 cm-1; when experimentally derived energy levels are unavailable calculated line position are provided, with an accuracy of the order of 0.2 cm-1. An extension to the main isotopologue H_216O is currently underway. R. J. Barber, J. Tennyson, G. J. Harris and R. N. Tolchenov, Mon. Not. R. Astron. Soc. {368}, 1087-1094 (2006). L. Lodi and J. Tennyson, J. Quant. Spectrosc. Radiat. Trans. (2012), doi:10.1016/j.jqsrt.2012.02.023 L. Lodi, J. Tennyson and O. L. Polyansky, J. Chem. Phys. {135}, 034113 (2011). J. Tennyson at al., J. Quant. Spectrosc. Radiat. Trans. {110}, 573-96 (2009).

  12. LINE PROFILE ASYMMETRIES AND THE CHROMOSPHERIC FLARE VELOCITY FIELD

    Energy Technology Data Exchange (ETDEWEB)

    Kuridze, D.; Mathioudakis, M.; Kennedy, M.; Keenan, F. P. [Astrophysics Research Centre, School of Mathematics and Physics, Queen’s University Belfast BT7 1NN (United Kingdom); Simões, P. J. A.; Voort, L. Rouppe van der; Fletcher, L. [SUPA School of Physics and Astronomy, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Carlsson, M.; Jafarzadeh, S. [Institute of Theoretical Astrophysics, University of Oslo, P.O. Box 1029 Blindern, NO-0315 Oslo (Norway); Allred, J. C.; Kowalski, A. F. [Department of Astronomy, University of Maryland, College Park, MD 20742 (United States); Graham, D. [INAF-Ossevatorio Astrofisico di Arcetri, I-50125 Firenze (Italy)

    2015-11-10

    The asymmetries observed in the line profiles of solar flares can provide important diagnostics of the properties and dynamics of the flaring atmosphere. In this paper the evolution of the Hα and Ca ii λ8542 lines are studied using high spatial, temporal, and spectral resolution ground-based observations of an M1.1 flare obtained with the Swedish 1 m Solar Telescope. The temporal evolution of the Hα line profiles from the flare kernel shows excess emission in the red wing (red asymmetry) before flare maximum and excess in the blue wing (blue asymmetry) after maximum. However, the Ca ii λ8542 line does not follow the same pattern, showing only a weak red asymmetry during the flare. RADYN simulations are used to synthesize spectral line profiles for the flaring atmosphere, and good agreement is found with the observations. We show that the red asymmetry observed in Hα is not necessarily associated with plasma downflows, and the blue asymmetry may not be related to plasma upflows. Indeed, we conclude that the steep velocity gradients in the flaring chromosphere modify the wavelength of the central reversal in the Hα line profile. The shift in the wavelength of maximum opacity to shorter and longer wavelengths generates the red and blue asymmetries, respectively.

  13. Building Bridges One Line at a Time

    Science.gov (United States)

    Grigsby, Cathy Murray

    2012-01-01

    In this article, first-grade students were taught the different kinds of lines that were part of the construction of various bridges--the curved lines of the arches of stone bridges, straight lines connecting the cables of a suspension bridge, vertical lines, horizontal lines, and so on. They gained practice in drawing structures and in fine brush…

  14. Patterns of Peeragogy

    OpenAIRE

    Corneli, Joseph; Danoff, Charles Jeffrey; Pierce, Charlotte; Ricaurte, Paola; MacDonald, Lisa Snow

    2015-01-01

    We describe nine design patterns that we have developed in our work on the Peeragogy project, in which we aim to help design the future of learning, inside and outside of institutions, drawing on the principles of free/libre/open source software and open culture. We use these patterns to build an “emergent roadmap” for the project. Our use of design patterns has some novel features that will be relevant to others working in projects with emergent structure.

  15. Pattern recognition & machine learning

    CERN Document Server

    Anzai, Y

    1992-01-01

    This is the first text to provide a unified and self-contained introduction to visual pattern recognition and machine learning. It is useful as a general introduction to artifical intelligence and knowledge engineering, and no previous knowledge of pattern recognition or machine learning is necessary. Basic for various pattern recognition and machine learning methods. Translated from Japanese, the book also features chapter exercises, keywords, and summaries.

  16. Ramadan major dietary patterns.

    Science.gov (United States)

    Shadman, Zhaleh; Poorsoltan, Nooshin; Akhoundan, Mahdieh; Larijani, Bagher; Soleymanzadeh, Mozhdeh; Akhgar Zhand, Camelia; Seyed Rohani, Zahra Alsadat; Khoshniat Nikoo, Mohsen

    2014-09-01

    There has been no data on population based dietary patterns during the Ramadan fasting month. The purpose of this study was to detect Ramadan major dietary patterns among those who fast in Tehran. This cross-sectional study included 600 subjects, aged 18-65 with body mass index (BMI) of 18.5-40, who had decided to fast during Ramadan. Anthropometric measurements, usual physical activity level and educational status were collected two weeks before Ramadan. Information on Ramadan dietary intakes was obtained using a food frequency questionnaire and factor analysis was used to identify major dietary patterns. We identified four major dietary patterns: 1) Western-like pattern; high in fast foods, salty snacks, nuts, potato, fish, poultry, chocolates, juices; 2) high cholesterol and high sweet junk food pattern; high in pickles, sweets and condiments, butter and cream, canned fish, visceral meats and eggs; 3) Mediterranean-like pattern; high in vegetables, olive oil, dates, dairy, dried fruits, fruits, red meats, tea and coffee and 4) Ramadan-style pattern; large consumption of Halim, soups, porridges, legumes and whole grains, soft drinks, Zoolbia and Bamieh. Age was positively and inversely associated with Mediterranean-like (P = 0.003; r = 0.17) and Ramadan style (P = 0.1; r = -0.13) dietary pattern, respectively. Pre-Ramadan physical activity level was associated with a Mediterranean-like dietary pattern (P characteristics, which has not yet been identified as a model of dietary pattern. Also, among identified dietary patterns, Mediterranean-like was the healthiest.

  17. Learning Python design patterns

    CERN Document Server

    Zlobin, Gennadiy

    2013-01-01

    This book takes a tutorial-based and user-friendly approach to covering Python design patterns. Its concise presentation means that in a short space of time, you will get a good introduction to various design patterns.If you are an intermediate level Python user, this book is for you. Prior knowledge of Python programming is essential. Some knowledge of UML is also required to understand the UML diagrams which are used to describe some design patterns.

  18. Numerical Methods for Plate Forming by Line Heating

    DEFF Research Database (Denmark)

    Clausen, Henrik Bisgaard

    2000-01-01

    Line heating is the process of forming originally flat plates into a desired shape by means of heat treatment. Parameter studies are carried out on a finite element model to provide knowledge of how the process behaves with varying heating conditions. For verification purposes, experiments are ca...... are carried out; one set of experiments investigates the actual heat flux distribution from a gas torch and another verifies the validty of the FE calculations. Finally, a method to predict the heating pattern is described....

  19. Laser patterning of highly conductive flexible circuits

    Science.gov (United States)

    Ji, Seok Young; Muhammed Ajmal, C.; Kim, Taehun; Chang, Won Seok; Baik, Seunghyun

    2017-04-01

    There has been considerable attention paid to highly conductive flexible adhesive (CFA) materials as electrodes and interconnectors for future flexible electronic devices. However, the patterning technology still needs to be developed to construct micro-scale electrodes and circuits. Here we developed the selective laser sintering technology where the pattering and curing were accomplished simultaneously without making additional masks. The CFA was composed of micro-scale Ag flakes, multiwalled carbon nanotubes decorated with Ag nanoparticles, and a nitrile-butadiene-rubber matrix. The Teflon-coated polyethylene terephthalate film was used as a flexible substrate. The width of lines (50-500 μm) and circuit patterns were controlled by the programmable scanning of a focused laser beam (power = 50 mW, scanning speed = 1 mm s-1). The laser irradiation removed solvent and induced effective coalescence among fillers providing a conductivity as high as 25 012 S cm-1. The conductivity stability was excellent under the ambient air and humid environments. The normalized resistance change of the pattern was smaller than 1.2 at the bending radius of 5 mm. The cyclability and adhesion of the laser-sintered line pattern on the substrate was excellent. A flexible circuit was fabricated sequentially for operating light emitting diodes during the bending motion, demonstrating excellent feasibility for practical applications in flexible electronics.

  20. Professional ASPNET Design Patterns

    CERN Document Server

    Millett, Scott

    2010-01-01

    Professional ASP.NET Design Patterns will show you how to implement design patterns in real ASP.NET applications by introducing you to the basic OOP skills needed to understand and interpret design patterns. A sample application used throughout the book is an enterprise level ASP.NET website with multi-tiered, SOA design techniques that can be applied to your future ASP.NET projects. Read about each design pattern in detail, including how to interpret the UML design, how to implement it in ASP.NET, its importance for ASP.NET development, and how it's integrated into the final project.

  1. Linear rotary optical delay lines

    Science.gov (United States)

    Guerboukha, Hichem; Qu, Hang; Skorobogatiy, Maksim

    2016-03-01

    We present a semi-analytical solution for the design of a high-speed rotary optical delay line that use a combination of two rotating curvilinear reflectors. We demonstrate that it is possible to design an infinite variety of the optical delay lines featuring linear dependence of the optical delay on the rotation angle. This is achieved via shape optimization of the rotating reflector surfaces. Moreover, a convenient spatial separation of the incoming and outgoing beams is possible. For the sake of example, we present blades that fit into a circle of 10cm diameter. Finally, a prototype of a rotary delay line is fabricated using CNC machining, and its optical properties are characterized.

  2. Standardization of beam line representations

    International Nuclear Information System (INIS)

    Carey, David C.

    1999-01-01

    Standardization of beam line representations means that a single set of data can be used in many situations to represent a beam line. This set of data should be the same no matter what the program to be run or the calculation to be made. We have concerned ourselves with three types of standardization: (1) The same set of data should be usable by different programs. (2) The inclusion of other items in the data, such as calculations to be done, units to be used, or preliminary specifications, should be in a notation similar to the lattice specification. (3) A single set of data should be used to represent a given beam line, no matter what is being modified or calculated. The specifics of what is to be modified or calculated can be edited into the data as part of the calculation. These three requirements all have aspects not previously discussed in a public forum. Implementations into TRANSPORT will be discussed

  3. Standardization of beam line representations

    International Nuclear Information System (INIS)

    Carey, David C.

    1998-01-01

    Standardization of beam line representations means that a single set of data can be used in many situations to represent a beam line. This set of data should be the same no matter what the program to be run or the calculation to be made. We have concerned ourselves with three types of standardization: (1) The same set of data should be usable by different programs. (2) The inclusion of other items in the data, such as calculations to be done, units to be used, or preliminary specifications, should be in a notation similar to the lattice specification. (3) A single set of data should be used to represent a given beam line, no matter what is being modified or calculated. The specifics of what is to be modified or calculated can be edited into the data as part of the calculation. These three requirements all have aspects not previously discussed in a public forum. Implementations into TRANSPORT will be discussed

  4. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo

    2011-12-01

    Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing.

  5. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo

    2011-12-01

    Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing. © 2011 ACM.

  6. Spent Pot Lining Characterization Framework

    Science.gov (United States)

    Ospina, Gustavo; Hassan, Mohamed I.

    2017-09-01

    Spent pot lining (SPL) management represents a major concern for aluminum smelters. There are two key elements for spent pot lining management: recycling and safe storage. Spent pot lining waste can potentially have beneficial uses in co-firing in cement plants. Also, safe storage of SPL is of utmost importance. Gas generation of SPL reaction with water and ignition sensitivity must be studied. However, determining the feasibility of SPL co-firing and developing the required procedures for safe storage rely on determining experimentally all the necessary SPL properties along with the appropriate test methods, recognized by emissions standards and fire safety design codes. The applicable regulations and relevant SPL properties for this purpose are presented along with the corresponding test methods.

  7. Double Helix Nodal Line Superconductor

    Science.gov (United States)

    Sun, Xiao-Qi; Lian, Biao; Zhang, Shou-Cheng

    2017-10-01

    Time-reversal invariant superconductors in three dimensions may contain nodal lines in the Brillouin zone, which behave as Wilson loops of 3D momentum-space Chern-Simons theory of the Berry connection. Here we study the conditions of realizing linked nodal lines (Wilson loops), which yield a topological contribution to the thermal magnetoelectric coefficient that is given by the Chern-Simons action. We find the essential conditions are the existence of torus or higher genus Fermi surfaces and spiral spin textures. We construct such a model with two torus Fermi surfaces, where a generic spin-dependent interaction leads to double-helix-like linked nodal lines as the superconductivity is developed.

  8. Asymmetric Digital Subscriber Line (ADSL

    Directory of Open Access Journals (Sweden)

    Slavko Šarić

    2012-10-01

    Full Text Available ADSL (Asymmetric Digital Subscriber Line is a technologythat allows transmission at 8.488 Mbps over the existingtelephone copper line (speed range depending on the distance.ADSL circuit connects the ADSL modems by twisted-pairtelephone lines creating three infonnation channels: high speedsimplex (maximum 9 Mbps, medium speed duplex channel(maximum 2 Mbps and plain old telephone service channel.ADSL technology supports up to seven synchronous channelsthat can be configured to meet the needs of the end user.One could simultaneously view four movies stored in MPEG 1fonnat on separate television sets (MPEG 1 transmitted at 1.5Mbps, hold a video-conference (transmitted at 348 kbps,download data files from a server at 128 kbps via ISDN andeven receive a telephone call.

  9. Do power lines cause cancer?

    International Nuclear Information System (INIS)

    Verkasalo, P.

    1994-01-01

    A Finnish study on the links between childhood cancer and magnetic fields around power lines was completed in autumn 1993. Cancer morbidity among all children living in the vicinity of power lines was on the expected level. The cancer risk of children exposed to unusually strong fields had increased slightly. In practice, power lines have increased exposure to magnetic fields only among children who are exposed to magnetic flux density exceeding 0.20 or 0.40 microtesla a year. Of the 130.000 children examined, 140 were diagnosed as having cancer. Because the number of cancer cases among children exposed to magnetic fields has been very low in individual studies, an overall picture of the cancer risk can only be obtained by combining the results of various studies. When the results of three Nordic studies on magnetic fields were combined, a twofold risk of leukaemia was discovered. The mechanism whereby magnetic fields may cause cancer, however, is not known. (orig.)

  10. Torsion sensing based on patterned piezoelectric beams

    Science.gov (United States)

    Cha, Youngsu; You, Hangil

    2018-03-01

    In this study, we investigated the sensing characteristics of piezoelectric beams under torsional loads. We used partially patterned piezoelectric beams to sense torsion. In particular, the piezoelectric patches are located symmetrically with respect to the line of the shear center of the beam. The patterned piezoelectric beam is modeled as a slender beam, and its electrical responses are obtained by piezoelectric electromechanical equations. To validate the modeling framework, experiments are performed using a setup that forces pure torsional deformation. Three different geometric configurations of the patterned piezoelectric layer are used for the experiments. The frequency and amplitude of the forced torsional load are systematically varied in order to study the behavior of the piezoelectric sensor. Experimental results demonstrate that two voltage outputs of the piezoelectric beam are approximately out of phase with identical amplitude. Moreover, the length of the piezoelectric layers has a significant influence on the sensing properties. Our theoretical predictions using the model support the experimental findings.

  11. Pattern database applications from design to manufacturing

    Science.gov (United States)

    Zhuang, Linda; Zhu, Annie; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

    2017-03-01

    Pattern-based approaches are becoming more common and popular as the industry moves to advanced technology nodes. At the beginning of a new technology node, a library of process weak point patterns for physical and electrical verification are starting to build up and used to prevent known hotspots from re-occurring on new designs. Then the pattern set is expanded to create test keys for process development in order to verify the manufacturing capability and precheck new tape-out designs for any potential yield detractors. With the database growing, the adoption of pattern-based approaches has expanded from design flows to technology development and then needed for mass-production purposes. This paper will present the complete downstream working flows of a design pattern database(PDB). This pattern-based data analysis flow covers different applications across different functional teams from generating enhancement kits to improving design manufacturability, populating new testing design data based on previous-learning, generating analysis data to improve mass-production efficiency and manufacturing equipment in-line control to check machine status consistency across different fab sites.

  12. Estimation of Line Efficiency by Aggregation

    NARCIS (Netherlands)

    M.B.M. de Koster (René)

    1987-01-01

    textabstractPresents a multi-stage flow lines with intermediate buffers approximated by two-stage lines using repeated aggregation. Characteristics of the aggregation method; Problems associated with the analysis and design of production lines.

  13. Synthesis, Characterization and Application of 2-Line and 6-Line ...

    African Journals Online (AJOL)

    Michael Horsfall

    com). KEY WORDS: .... The Pb(II) in the filtrates were analyzed using AAS and the amount sorbed were calculated from equation (1). Effect of pH : 25 mL of 850 mg/L (or 750 mg/L) .... obtained for the 6-line ferrihydrite were cubic shape.

  14. Project development and commercialization of on-line analysis systems

    International Nuclear Information System (INIS)

    Watt, J.S.

    1997-01-01

    A project team first in the Australian Atomic Energy Commission (AAEC) and since 1982 in CSIRO has developed many on-line analysis systems for the mineral and energy industries. The development of these projects has followed a common pattern of laboratory R and D, field trials, commercialisation and technology transfer. This successful pattern is illustrated using examples of the development of systems for the on-line analysis of mineral slurries, for determination of the ash content of coal on conveyors, and for determination of the flow rates of oil, water and gas in pipelines. The first two systems are licensed to Australian companies, Amdel Ltd and Mineral Control Instrumentation Ltd. Both systems are used by industry worldwide, and are the market leaders for radioisotope gauges in their application field. The third system, the multiphase flow meter, was licensed in 1997 to Kvaerner FSSL Ltd of Aberdeen. This meter has even greater potential than the other two systems for economic benefit from its used and for numbers of installations. The on-line analysis systems have been developed to increase the productivity of the Australian mineral and energy industries, and to provide economic benefit to Australia. The economic benefit sought is predominantly improved process control based on use of the instrument, rather than from its sale. Sales of instruments are significant, however, with about A$80 million from the analysis systems and their derivatives since the 1970s. Some of the issues associated with the development of the on-line analysis system are outlined

  15. Assembly line performance and modeling

    Science.gov (United States)

    Rane, Arun B.; Sunnapwar, Vivek K.

    2017-09-01

    Automobile sector forms the backbone of manufacturing sector. Vehicle assembly line is important section in automobile plant where repetitive tasks are performed one after another at different workstations. In this thesis, a methodology is proposed to reduce cycle time and time loss due to important factors like equipment failure, shortage of inventory, absenteeism, set-up, material handling, rejection and fatigue to improve output within given cost constraints. Various relationships between these factors, corresponding cost and output are established by scientific approach. This methodology is validated in three different vehicle assembly plants. Proposed methodology may help practitioners to optimize the assembly line using lean techniques.

  16. Assembly-line Simulation Program

    Science.gov (United States)

    Chamberlain, Robert G.; Zendejas, Silvino; Malhotra, Shan

    1987-01-01

    Costs and profits estimated for models based on user inputs. Standard Assembly-line Manufacturing Industry Simulation (SAMIS) program generalized so useful for production-line manufacturing companies. Provides accurate and reliable means of comparing alternative manufacturing processes. Used to assess impact of changes in financial parameters as cost of resources and services, inflation rates, interest rates, tax policies, and required rate of return of equity. Most important capability is ability to estimate prices manufacturer would have to receive for its products to recover all of costs of production and make specified profit. Written in TURBO PASCAL.

  17. Helium transfer line installation details.

    CERN Multimedia

    G. Perinic

    2007-01-01

    A particularity of the 32 m long four in one helium transfer line in between the cold box in USC55 and the cavern UX5 is the fact that the transfer line passes through a hole in the crane rail support beam. In order to ensure the alignment of the suspension rail in the interconnecting tunnel with the hole in the rail support as well as the connection points at both ends required precise measurements of the given geometries as well as the installation of a temporary target for the verification of the theoretical predictions.

  18. Patterns in Frozen Ground

    Science.gov (United States)

    Hallet, B.; Sletten, R. S.; Fletcher, R. C.

    2005-12-01

    The expansion and contraction of ice-cemented soils, due to seasonal and shorter term temperature fluctuations, or to the growth and decay of ice lenses in soils, produce some of the most striking geometric patterns in nature. These patterns, known as patterned ground, have diverse surface expressions including local relief, soil cracks, size-segregated mineral material, and spatial variations in vegetation density and species composition. They can be subdivided into sorted patterns, which range in size from 0.1 to 3 m and are defined by spatial differentiation of soil material according to grain size, and non-sorted patterns that may be 10's of meters in size. The processes underlying the pattern development have been elucidated through detailed observations and measurements in the field, as well as instructive numerical simulations. Substantial mechanistic insight has also been gained from recent advances in the fundamental physics of ice in porous media and in the nonlinear dynamics of granular media. Current research activity is focused on polygonal patterned ground in the Dry Valleys of Antarctica where distinct 10 to 30 m polygons are ubiquitous; they are characteristically outlined by vertical cracks that become infilled with wedges of sand. This patterned ground is of particular interest because it resembles patterns seen on the surface of Mars and because a long-term, high-resolution record exists of soil temperatures and thermal strains. The crack network, which is very similar to the networks of contraction cracks in drying mud and other contracting materials, self-organizes through interactions between thermal stresses, fracture, and the evolving pattern of cracks bounding the polygons. Initially, these cracks tend to curve to join pre-existing cracks at right angles due to the influence of these early cracks on the stress field. The evolution of the patterns toward 5 or 6-sided polygons with straight-sided cracks that join at symmetric triple junctions

  19. Crazy paving pattern.

    Science.gov (United States)

    Verma, Rajanshu; Abdoh, Mamoun

    2017-04-01

    Crazy paving pattern is the name given to characteristic polygonal pattern of interlobular thickening on computed tomography (CT scan) of the lung, which results from accumulation of collagen, interstitial fluid, cell, or other pathology and may be seen in multiple clinical conditions including metastatic cancer as described in this case.

  20. Biologic Patterns of Disability.

    Science.gov (United States)

    Granger, Carl V.; Linn, Richard T.

    2000-01-01

    Describes the use of Rasch analysis to elucidate biological patterns of disability present in the functional ability of persons undergoing medical rehabilitation. Uses two measures, one for inpatients and one for outpatients, to illustrate the approach and provides examples of some biological patterns of disability associated with specific types…

  1. Patterns of Academic Procrastination.

    Science.gov (United States)

    Day, Victor; Mensink, David; O'Sullivan, Michael

    2000-01-01

    Uses the Academic Procrastination Questionnaire to measure procrastination and six possible patterns underlying it among undergraduate students. Finds that the most common patterns for clients involved Evaluation Anxiety or being Discouraged/Depressed, or Dependent. Supports individualized assessment and solutions for academic procrastination. (SC)

  2. Is It a Pattern?

    Science.gov (United States)

    McGarvey, Lynn M.

    2013-01-01

    This article describes how in early mathematics learning, young children are often asked to recognize and describe visual patterns in their environment--perhaps on their clothing, a toy, or the carpet; around a picture frame; or in the playground equipment. Exploring patterns in the early years is seen as an important introduction to algebraic…

  3. Patterning roadmap: 2017 prospects

    Science.gov (United States)

    Neisser, Mark

    2017-06-01

    Road mapping of semiconductor chips has been underway for over 20 years, first with the International Technology Roadmap for Semiconductors (ITRS) roadmap and now with the International Roadmap for Devices and Systems (IRDS) roadmap. The original roadmap was mostly driven bottom up and was developed to ensure that the large numbers of semiconductor producers and suppliers had good information to base their research and development on. The current roadmap is generated more top-down, where the customers of semiconductor chips anticipate what will be needed in the future and the roadmap projects what will be needed to fulfill that demand. The More Moore section of the roadmap projects that advanced logic will drive higher-resolution patterning, rather than memory chips. Potential solutions for patterning future logic nodes can be derived as extensions of `next-generation' patterning technologies currently under development. Advanced patterning has made great progress, and two `next-generation' patterning technologies, EUV and nanoimprint lithography, have potential to be in production as early as 2018. The potential adoption of two different next-generation patterning technologies suggests that patterning technology is becoming more specialized. This is good for the industry in that it lowers overall costs, but may lead to slower progress in extending any one patterning technology in the future.

  4. Patterns in Software Development

    DEFF Research Database (Denmark)

    Corry, Aino Vonge

    the university and I entered a project to industry within Center for Object Technology (COT). I focused on promoting the pattern concept to the Danish software industry in order to help them take advantage of the benefits of applying patterns in system development. In the obligatory stay abroad, I chose to visit...

  5. Patterns of Knowledge Construction

    Science.gov (United States)

    Chang, Bo

    2018-01-01

    The purpose of this study was to identify knowledge construction patterns in a local learning community. Observation, documents, and semistructured interviews were employed to collect data. Twenty learners were interviewed. Data were analyzed inductively using the constant comparative method. Five major patterns--radiation, circulation,…

  6. CERN Video News on line

    CERN Multimedia

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  7. Teachers' Conceptions of Tangent Line

    Science.gov (United States)

    Paez Murillo, Rosa Elvira; Vivier, Laurent

    2013-01-01

    In order to study the conceptions, and their evolutions, of the tangent line to a curve an updating workshop which took place in Mexico was designed for upper secondary school teachers. This workshop was planned using the methodology of cooperative learning, scientific debate and auto reflection (ACODESA) and the conception-knowing-concept model…

  8. Priming the Mental Time Line

    Science.gov (United States)

    Di Bono, Maria Grazia; Casarotti, Marco; Priftis, Konstantinos; Gava, Lucia; Umilta, Carlo; Zorzi, Marco

    2012-01-01

    Growing experimental evidence suggests that temporal events are represented on a mental time line, spatially oriented from left to right. Support for the spatial representation of time comes mostly from studies that have used spatially organized responses. Moreover, many of these studies did not avoid possible confounds attributable to target…

  9. Reconnections of Wave Vortex Lines

    Science.gov (United States)

    Berry, M. V.; Dennis, M. R.

    2012-01-01

    When wave vortices, that is nodal lines of a complex scalar wavefunction in space, approach transversely, their typical crossing and reconnection is a two-stage process incorporating two well-understood elementary events in which locally coplanar hyperbolas switch branches. The explicit description of this reconnection is a pedagogically useful…

  10. Advanced optical delay line demonstrator

    NARCIS (Netherlands)

    Dool, T.C. van den; Kamphues, F.G.; Fouss, B.; Henrioulle, K.; Hogenhuis, H.

    2004-01-01

    TNO TPD, in cooperation with Micromega-Dynamics and Dutch Space, has designed an advanced Optical Delay Line (ODL) for use in future ground based and space interferometry missions. The work is performed under NIVR contract in preparation for GENIE and DARWIN. Using the ESO PRIMA DDL requirements as

  11. Signal Transmission on Power Lines

    DEFF Research Database (Denmark)

    Dalby, Arne Brejning

    1997-01-01

    In the analysis of power-line networks over a large frequency span, the time-domain method used in programs like EMTP (Electromagnetic Time domain Program) can not be used. A more rigorous analysis method must be employed. The correct analysis method (assuming TEM-mode propagation) for multiple...

  12. Managing first-line failure.

    Science.gov (United States)

    Cooper, David A

    2014-01-01

    WHO standard of care for failure of a first regimen, usually 2N(t)RTI's and an NNRTI, consists of a ritonavir-boosted protease inhibitor with a change in N(t)RTI's. Until recently, there was no evidence to support these recommendations which were based on expert opinion. Two large randomized clinical trials, SECOND LINE and EARNEST both showed excellent response rates (>80%) for the WHO standard of care and indicated that a novel regimen of a boosted protease inhibitor with an integrase inhibitor had equal efficacy with no difference in toxicity. In EARNEST, a third arm consisting of induction with the combined protease and integrase inhibitor followed by protease inhibitor monotherapy maintenance was inferior and led to substantial (20%) protease inhibitor resistance. These studies confirm the validity of the current recommendations of WHO and point to a novel public health approach of using two new classes for second line when standard first-line therapy has failed, which avoids resistance genotyping. Notwithstanding, adherence must be stressed in those failing first-line treatments. Protease inhibitor monotherapy is not suitable for a public health approach in low- and middle-income countries.

  13. Measurements of weak conversion lines

    International Nuclear Information System (INIS)

    Feoktistov, A.I.; Frantsev, Yu.E.

    1979-01-01

    Described is a new methods for measuring weak conversion lines with the help of the β spectrometer of the π √ 2 type which permits to increase the reliability of the results obtained. According to this method the measurements were carried out by short series with the storage of the information obtained on the punched tape. The spectrometer magnetic field was stabilized during the measuring of the conversion spectra with the help of three nmr recorders. Instead of the dependence of the pulse calculation rate on the magnetic field value was measured the dependence of the calculation rate on the value of the voltage applied between the source and the spectrometer chamber. A short description of the automatic set-up for measuring conversion lines according to the method proposed is given. The main set-up elements are the voltage multiplexer timer, printer, scaler and the pulse analyzer. With the help of the above methods obtained is the K 1035, 8 keV 182 Ta line. It is obtained as a result of the composition of 96 measurement series. Each measurement time constitutes 640 s 12 points are taken on the line

  14. Software product lines : Organizational alternatives

    NARCIS (Netherlands)

    Bosch, J

    2001-01-01

    Software product lines enjoy increasingly wide adoption in the software industry. Most authors focus on the technical and process aspects and assume an organizational model consisting of a domain engineering unit and several application engineering units. In our cooperation with several software

  15. Line bundles and flat connections

    Indian Academy of Sciences (India)

    We prove that there are cocompact lattices Γ in S L ( 2 , C ) with the property that there are holomorphic line bundles L on S L ( 2 , C ) / Γ with c 1 ( L ) = 0 such that L does not admit any unitary flat connection. Author Affiliations. INDRANIL BISWAS1 GEORG SCHUMACHER2. School of Mathematics, Tata Institute of ...

  16. Coiled transmission line pulse generators

    Science.gov (United States)

    McDonald, Kenneth Fox

    2010-11-09

    Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

  17. Picosecond resolution programmable delay line

    International Nuclear Information System (INIS)

    Suchenek, Mariusz

    2009-01-01

    The note presents implementation of a programmable delay line for digital signals. The tested circuit has a subnanosecond delay range programmable with a resolution of picoseconds. Implementation of the circuit was based on low-cost components, easily available on the market. (technical design note)

  18. Field approach to three-dimensional gene expression pattern characterization

    Science.gov (United States)

    Costa, L. da F.; Travençolo, B. A. N.; Azeredo, A.; Beletti, M. E.; Müller, G. B.; Rasskin-Gutman, D.; Sternik, G.; Ibañes, M.; Izpisúa-Belmonte, J. C.

    2005-04-01

    We present a vector field method for obtaining the spatial organization of three-dimensional patterns of gene expression based on gradients and lines of force obtained by numerical integration. The convergence of these lines of force in local maxima are centers of gene expression, providing a natural and powerful framework to characterize the organization and dynamics of biological structures. We apply this methodology to analyze the expression pattern of the enhanced green fluorescent protein (EGFP) driven by the promoter of light chain myosin II during zebrafish heart formation.

  19. Facile stamp patterning method for superhydrophilic/superhydrophobic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Sungnam, E-mail: blueden@postech.ac.kr; Hwang, Woonbong, E-mail: whwang@postech.ac.kr [Department of Mechanical Engineering, POSTECH, Pohang 680-749 (Korea, Republic of)

    2015-11-16

    Patterning techniques are essential to many research fields such as chemistry, biology, medicine, and micro-electromechanical systems. In this letter, we report a simple, fast, and low-cost superhydrophobic patterning method using a superhydrophilic template. The technique is based on the contact stamping of the surface during hydrophobic dip coating. Surface characteristics were measured using scanning electron microscopy and energy-dispersive X-ray spectroscopic analysis. The results showed that the hydrophilic template, which was contacted with the stamp, was not affected by the hydrophobic solution. The resolution study was conducted using a stripe shaped stamp. The patterned line was linearly proportional to the width of the stamp line with a constant narrowing effect. A surface with regions of four different types of wetting was fabricated to demonstrate the patterning performance.

  20. RÉALISATION D'UN FILTRE SPECTRAL ACCORDABLE ÉTROIT À 1.55 μm EN OPTIQUE INTÉGRÉE SUR NIOBATE DE LITHIUM. ÉTUDE DES LIMITATIONS IMPOSÉES PAR LA TECHNOLOGIE.

    OpenAIRE

    Chollet , Franck

    1995-01-01

    The exponential growth of the data rate in future telecommunication networks, requires the use of new transmission ways. Optical based networks show great promise for replacing 'slow' electronics technology. Through the use of wavelength division multiplexing technique (WDM), it becomes possible not only to increase the data rate on the line (here, an optical fibre) but also to use new alloptical based network. One of the key devices in these architectures is the tunable spectral filter. The ...